clk: bcm2835: Mark GPIO clocks enabled at boot as critical

These divide off of PLLD_PER and are used for the ethernet and wifi
PHYs source PLLs.  Neither of them is currently represented by a phy
device that would grab the clock for us.

This keeps other drivers from killing the networking PHYs when they
disable their own clocks and trigger PLLD_PER's refcount going to 0.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index d9db03cb3fd84163f320dca6f2e533c61f61b5ad..400615baea97cbfb953c25be38062a121c01b4ac 100644 (file)
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -1239,6 +1239,12 @@ static struct clk *bcm2835_register_clock(struct bcm2835_cprman *cprman,
        } else {
                init.ops = &bcm2835_clock_clk_ops;
                init.flags |= CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE;
+
+               /* If the clock wasn't actually enabled at boot, it's not
+                * critical.
+                */
+               if (!(cprman_read(cprman, data->ctl_reg) & CM_ENABLE))
+                       init.flags &= ~CLK_IS_CRITICAL;
        }
 
        clock = devm_kzalloc(cprman->dev, sizeof(*clock), GFP_KERNEL);
@@ -1708,13 +1714,15 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
                .div_reg = CM_GP1DIV,
                .int_bits = 12,
                .frac_bits = 12,
+               .flags = CLK_IS_CRITICAL,
                .is_mash_clock = true),
        [BCM2835_CLOCK_GP2]     = REGISTER_PER_CLK(
                .name = "gp2",
                .ctl_reg = CM_GP2CTL,
                .div_reg = CM_GP2DIV,
                .int_bits = 12,
-               .frac_bits = 12),
+               .frac_bits = 12,
+               .flags = CLK_IS_CRITICAL),
 
        /* HDMI state machine */
        [BCM2835_CLOCK_HSM]     = REGISTER_PER_CLK(