#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/bitops.h>
+
#include <asm/processor.h>
#include <asm/msr.h>
#include <asm/e820.h>
#include <asm/mtrr.h>
+
#include "cpu.h"
#ifdef CONFIG_X86_OOSTORE
static u32 __cpuinit power2(u32 x)
{
u32 s = 1;
- while(s <= x)
+
+ while (s <= x)
s <<= 1;
+
return s >>= 1;
}
/*
- * Set up an actual MCR
+ * Set up an actual MCR
*/
-
static void __cpuinit centaur_mcr_insert(int reg, u32 base, u32 size, int key)
{
u32 lo, hi;
}
/*
- * Figure what we can cover with MCR's
+ * Figure what we can cover with MCR's
*
- * Shortcut: We know you can't put 4Gig of RAM on a winchip
+ * Shortcut: We know you can't put 4Gig of RAM on a winchip
*/
-
-static u32 __cpuinit ramtop(void) /* 16388 */
+static u32 __cpuinit ramtop(void)
{
- int i;
- u32 top = 0;
u32 clip = 0xFFFFFFFFUL;
+ u32 top = 0;
+ int i;
for (i = 0; i < e820.nr_map; i++) {
unsigned long start, end;
if (e820.map[i].addr > 0xFFFFFFFFUL)
continue;
/*
- * Don't MCR over reserved space. Ignore the ISA hole
- * we frob around that catastrophe already
+ * Don't MCR over reserved space. Ignore the ISA hole
+ * we frob around that catastrophe already
*/
-
- if (e820.map[i].type == E820_RESERVED)
- {
- if (e820.map[i].addr >= 0x100000UL && e820.map[i].addr < clip)
+ if (e820.map[i].type == E820_RESERVED) {
+ if (e820.map[i].addr >= 0x100000UL &&
+ e820.map[i].addr < clip)
clip = e820.map[i].addr;
continue;
}
if (end > top)
top = end;
}
- /* Everything below 'top' should be RAM except for the ISA hole.
- Because of the limited MCR's we want to map NV/ACPI into our
- MCR range for gunk in RAM
-
- Clip might cause us to MCR insufficient RAM but that is an
- acceptable failure mode and should only bite obscure boxes with
- a VESA hole at 15Mb
-
- The second case Clip sometimes kicks in is when the EBDA is marked
- as reserved. Again we fail safe with reasonable results
- */
-
- if(top > clip)
+ /*
+ * Everything below 'top' should be RAM except for the ISA hole.
+ * Because of the limited MCR's we want to map NV/ACPI into our
+ * MCR range for gunk in RAM
+ *
+ * Clip might cause us to MCR insufficient RAM but that is an
+ * acceptable failure mode and should only bite obscure boxes with
+ * a VESA hole at 15Mb
+ *
+ * The second case Clip sometimes kicks in is when the EBDA is marked
+ * as reserved. Again we fail safe with reasonable results
+ */
+ if (top > clip)
top = clip;
return top;
}
/*
- * Compute a set of MCR's to give maximum coverage
+ * Compute a set of MCR's to give maximum coverage
*/
-
static int __cpuinit centaur_mcr_compute(int nr, int key)
{
u32 mem = ramtop();
u32 floor = 0;
int ct = 0;
- while (ct < nr)
- {
+ while (ct < nr) {
u32 fspace = 0;
+ u32 high;
+ u32 low;
/*
- * Find the largest block we will fill going upwards
+ * Find the largest block we will fill going upwards
*/
-
- u32 high = power2(mem-top);
+ high = power2(mem-top);
/*
- * Find the largest block we will fill going downwards
+ * Find the largest block we will fill going downwards
*/
-
- u32 low = base/2;
+ low = base/2;
/*
- * Don't fill below 1Mb going downwards as there
- * is an ISA hole in the way.
+ * Don't fill below 1Mb going downwards as there
+ * is an ISA hole in the way.
*/
-
if (base <= 1024*1024)
low = 0;
/*
- * See how much space we could cover by filling below
- * the ISA hole
+ * See how much space we could cover by filling below
+ * the ISA hole
*/
if (floor == 0)
/* And forget ROM space */
/*
- * Now install the largest coverage we get
+ * Now install the largest coverage we get
*/
-
- if (fspace > high && fspace > low)
- {
+ if (fspace > high && fspace > low) {
centaur_mcr_insert(ct, floor, fspace, key);
floor += fspace;
- }
- else if (high > low) {
+ } else if (high > low) {
centaur_mcr_insert(ct, top, high, key);
top += high;
- }
- else if (low > 0) {
+ } else if (low > 0) {
base -= low;
centaur_mcr_insert(ct, base, low, key);
- }
- else break;
+ } else
+ break;
ct++;
}
/*
- * We loaded ct values. We now need to set the mask. The caller
- * must do this bit.
+ * We loaded ct values. We now need to set the mask. The caller
+ * must do this bit.
*/
-
return ct;
}
static void __cpuinit centaur_create_optimal_mcr(void)
{
+ int used;
int i;
+
/*
- * Allocate up to 6 mcrs to mark as much of ram as possible
- * as write combining and weak write ordered.
+ * Allocate up to 6 mcrs to mark as much of ram as possible
+ * as write combining and weak write ordered.
*
- * To experiment with: Linux never uses stack operations for
- * mmio spaces so we could globally enable stack operation wc
+ * To experiment with: Linux never uses stack operations for
+ * mmio spaces so we could globally enable stack operation wc
*
- * Load the registers with type 31 - full write combining, all
- * writes weakly ordered.
+ * Load the registers with type 31 - full write combining, all
+ * writes weakly ordered.
*/
- int used = centaur_mcr_compute(6, 31);
+ used = centaur_mcr_compute(6, 31);
/*
- * Wipe unused MCRs
+ * Wipe unused MCRs
*/
-
for (i = used; i < 8; i++)
wrmsr(MSR_IDT_MCR0+i, 0, 0);
}
static void __cpuinit winchip2_create_optimal_mcr(void)
{
u32 lo, hi;
+ int used;
int i;
/*
- * Allocate up to 6 mcrs to mark as much of ram as possible
- * as write combining, weak store ordered.
+ * Allocate up to 6 mcrs to mark as much of ram as possible
+ * as write combining, weak store ordered.
*
- * Load the registers with type 25
- * 8 - weak write ordering
- * 16 - weak read ordering
- * 1 - write combining
+ * Load the registers with type 25
+ * 8 - weak write ordering
+ * 16 - weak read ordering
+ * 1 - write combining
*/
-
- int used = centaur_mcr_compute(6, 25);
+ used = centaur_mcr_compute(6, 25);
/*
- * Mark the registers we are using.
+ * Mark the registers we are using.
*/
-
rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
for (i = 0; i < used; i++)
lo |= 1<<(9+i);
wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
/*
- * Wipe unused MCRs
+ * Wipe unused MCRs
*/
for (i = used; i < 8; i++)
}
/*
- * Handle the MCR key on the Winchip 2.
+ * Handle the MCR key on the Winchip 2.
*/
-
static void __cpuinit winchip2_unprotect_mcr(void)
{
u32 lo, hi;
display_cacheinfo(c);
}
+enum {
+ ECX8 = 1<<1,
+ EIERRINT = 1<<2,
+ DPM = 1<<3,
+ DMCE = 1<<4,
+ DSTPCLK = 1<<5,
+ ELINEAR = 1<<6,
+ DSMC = 1<<7,
+ DTLOCK = 1<<8,
+ EDCTLB = 1<<8,
+ EMMX = 1<<9,
+ DPDC = 1<<11,
+ EBRPRED = 1<<12,
+ DIC = 1<<13,
+ DDC = 1<<14,
+ DNA = 1<<15,
+ ERETSTK = 1<<16,
+ E2MMX = 1<<19,
+ EAMD3D = 1<<20,
+};
+
static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
{
- enum {
- ECX8 = 1<<1,
- EIERRINT = 1<<2,
- DPM = 1<<3,
- DMCE = 1<<4,
- DSTPCLK = 1<<5,
- ELINEAR = 1<<6,
- DSMC = 1<<7,
- DTLOCK = 1<<8,
- EDCTLB = 1<<8,
- EMMX = 1<<9,
- DPDC = 1<<11,
- EBRPRED = 1<<12,
- DIC = 1<<13,
- DDC = 1<<14,
- DNA = 1<<15,
- ERETSTK = 1<<16,
- E2MMX = 1<<19,
- EAMD3D = 1<<20,
- };
char *name;
u32 fcr_set = 0;
u32 lo, hi, newlo;
u32 aa, bb, cc, dd;
- /* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
- 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
+ /*
+ * Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+ * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
+ */
clear_bit(0*32+31, c->x86_capability);
switch (c->x86) {
-
case 5:
- switch (c->x86_model) {
- case 4:
- name = "C6";
- fcr_set = ECX8|DSMC|EDCTLB|EMMX|ERETSTK;
- fcr_clr = DPDC;
- printk(KERN_NOTICE "Disabling bugged TSC.\n");
- clear_bit(X86_FEATURE_TSC, c->x86_capability);
+ switch (c->x86_model) {
+ case 4:
+ name = "C6";
+ fcr_set = ECX8|DSMC|EDCTLB|EMMX|ERETSTK;
+ fcr_clr = DPDC;
+ printk(KERN_NOTICE "Disabling bugged TSC.\n");
+ clear_bit(X86_FEATURE_TSC, c->x86_capability);
#ifdef CONFIG_X86_OOSTORE
- centaur_create_optimal_mcr();
- /* Enable
- write combining on non-stack, non-string
- write combining on string, all types
- weak write ordering
-
- The C6 original lacks weak read order
-
- Note 0x120 is write only on Winchip 1 */
-
- wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0);
+ centaur_create_optimal_mcr();
+ /*
+ * Enable:
+ * write combining on non-stack, non-string
+ * write combining on string, all types
+ * weak write ordering
+ *
+ * The C6 original lacks weak read order
+ *
+ * Note 0x120 is write only on Winchip 1
+ */
+ wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0);
#endif
+ break;
+ case 8:
+ switch (c->x86_mask) {
+ default:
+ name = "2";
break;
- case 8:
- switch (c->x86_mask) {
- default:
- name = "2";
- break;
- case 7 ... 9:
- name = "2A";
- break;
- case 10 ... 15:
- name = "2B";
- break;
- }
- fcr_set = ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
- fcr_clr = DPDC;
+ case 7 ... 9:
+ name = "2A";
+ break;
+ case 10 ... 15:
+ name = "2B";
+ break;
+ }
+ fcr_set = ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|
+ E2MMX|EAMD3D;
+ fcr_clr = DPDC;
#ifdef CONFIG_X86_OOSTORE
- winchip2_unprotect_mcr();
- winchip2_create_optimal_mcr();
- rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
- /* Enable
- write combining on non-stack, non-string
- write combining on string, all types
- weak write ordering
- */
- lo |= 31;
- wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
- winchip2_protect_mcr();
+ winchip2_unprotect_mcr();
+ winchip2_create_optimal_mcr();
+ rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+ /*
+ * Enable:
+ * write combining on non-stack, non-string
+ * write combining on string, all types
+ * weak write ordering
+ */
+ lo |= 31;
+ wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+ winchip2_protect_mcr();
#endif
- break;
- case 9:
- name = "3";
- fcr_set = ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
- fcr_clr = DPDC;
+ break;
+ case 9:
+ name = "3";
+ fcr_set = ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|
+ E2MMX|EAMD3D;
+ fcr_clr = DPDC;
#ifdef CONFIG_X86_OOSTORE
- winchip2_unprotect_mcr();
- winchip2_create_optimal_mcr();
- rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
- /* Enable
- write combining on non-stack, non-string
- write combining on string, all types
- weak write ordering
- */
- lo |= 31;
- wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
- winchip2_protect_mcr();
+ winchip2_unprotect_mcr();
+ winchip2_create_optimal_mcr();
+ rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+ /*
+ * Enable:
+ * write combining on non-stack, non-string
+ * write combining on string, all types
+ * weak write ordering
+ */
+ lo |= 31;
+ wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+ winchip2_protect_mcr();
#endif
- break;
- default:
- name = "??";
- }
+ break;
+ default:
+ name = "??";
+ }
- rdmsr(MSR_IDT_FCR1, lo, hi);
- newlo = (lo|fcr_set) & (~fcr_clr);
+ rdmsr(MSR_IDT_FCR1, lo, hi);
+ newlo = (lo|fcr_set) & (~fcr_clr);
- if (newlo != lo) {
- printk(KERN_INFO "Centaur FCR was 0x%X now 0x%X\n", lo, newlo);
- wrmsr(MSR_IDT_FCR1, newlo, hi);
- } else {
- printk(KERN_INFO "Centaur FCR is 0x%X\n", lo);
- }
- /* Emulate MTRRs using Centaur's MCR. */
- set_bit(X86_FEATURE_CENTAUR_MCR, c->x86_capability);
- /* Report CX8 */
- set_bit(X86_FEATURE_CX8, c->x86_capability);
- /* Set 3DNow! on Winchip 2 and above. */
- if (c->x86_model >= 8)
- set_bit(X86_FEATURE_3DNOW, c->x86_capability);
- /* See if we can find out some more. */
- if (cpuid_eax(0x80000000) >= 0x80000005) {
- /* Yes, we can. */
- cpuid(0x80000005, &aa, &bb, &cc, &dd);
- /* Add L1 data and code cache sizes. */
- c->x86_cache_size = (cc>>24)+(dd>>24);
- }
- sprintf(c->x86_model_id, "WinChip %s", name);
- break;
+ if (newlo != lo) {
+ printk(KERN_INFO "Centaur FCR was 0x%X now 0x%X\n",
+ lo, newlo);
+ wrmsr(MSR_IDT_FCR1, newlo, hi);
+ } else {
+ printk(KERN_INFO "Centaur FCR is 0x%X\n", lo);
+ }
+ /* Emulate MTRRs using Centaur's MCR. */
+ set_bit(X86_FEATURE_CENTAUR_MCR, c->x86_capability);
+ /* Report CX8 */
+ set_bit(X86_FEATURE_CX8, c->x86_capability);
+ /* Set 3DNow! on Winchip 2 and above. */
+ if (c->x86_model >= 8)
+ set_bit(X86_FEATURE_3DNOW, c->x86_capability);
+ /* See if we can find out some more. */
+ if (cpuid_eax(0x80000000) >= 0x80000005) {
+ /* Yes, we can. */
+ cpuid(0x80000005, &aa, &bb, &cc, &dd);
+ /* Add L1 data and code cache sizes. */
+ c->x86_cache_size = (cc>>24)+(dd>>24);
+ }
+ sprintf(c->x86_model_id, "WinChip %s", name);
+ break;
case 6:
- init_c3(c);
- break;
+ init_c3(c);
+ break;
}
}
-static unsigned int __cpuinit centaur_size_cache(struct cpuinfo_x86 *c, unsigned int size)
+static unsigned int __cpuinit
+centaur_size_cache(struct cpuinfo_x86 *c, unsigned int size)
{
/* VIA C3 CPUs (670-68F) need further shifting. */
if ((c->x86 == 6) && ((c->x86_model == 7) || (c->x86_model == 8)))
size >>= 8;
- /* VIA also screwed up Nehemiah stepping 1, and made
- it return '65KB' instead of '64KB'
- - Note, it seems this may only be in engineering samples. */
- if ((c->x86 == 6) && (c->x86_model == 9) && (c->x86_mask == 1) && (size == 65))
+ /*
+ * There's also an erratum in Nehemiah stepping 1, which
+ * returns '65KB' instead of '64KB'
+ * - Note, it seems this may only be in engineering samples.
+ */
+ if ((c->x86 == 6) && (c->x86_model == 9) &&
+ (c->x86_mask == 1) && (size == 65))
size -= 1;
return size;
projects / openwrt / staging / blogic.git / commitdiff