brcm47xx: fix network failsafe indication

Remove the code used on the old switch driver.
The Ethernet drive is loaded as a module and needs some time to get up
therefor we added some wait function.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39254

diff --git a/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm
index 76382e5ceebaeef2b8636d81fe6d55be81e3ec8d..4b0d0eb674ae74c30a20993a04517b76abdc1f52 100644 (file)
--- a/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm
+++ b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm
@@ -1,37 +1,16 @@
 #!/bin/sh
 
-set_preinit_iface() {
+preinit_iface() {
        ifname=eth0
 
        # hardware specific overrides
-       case "$(cat /proc/diag/model)" in
-               "Linksys WAP54G V1") ifname=eth1;;
-               "ASUS WL-HDD") ifname=eth1;;
-               "ASUS WL-300g") ifname=eth1;;
-               "ASUS (unknown, BCM4702)") ifname=eth1;;
-               "Sitecom WL-105b") ifname=eth1;;
+       case "$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo)" in
+               "Asus WLHDD") ifname=eth1;;
+               "Asus WL300G") ifname=eth1;;
        esac
 
-       # The interface has to be up to configure the switch
-       ifconfig $ifname 0.0.0.0 up
-       [ -f /lib/modules/`uname -r`/switch-robo.ko ] && {
-               rmmod switch-robo
-               insmod switch-robo
-       }
-       [ -f /lib/modules/`uname -r`/switch-adm.ko ] && {
-               rmmod switch-adm
-               insmod switch-adm
-       }
+       local try=0;
+       while [ $((try++)) -le 5 ] && [ ! -f /sys/class/net/$ifname/operstate ]; do sleep 1; done
 }
 
-init_iface() {
-       [ -d /proc/switch/eth0 ] && [ "$ifname" = "eth0" ] && {
-               case "$(cat /proc/switch/eth0/cpuport)" in
-                       "5") cpu_port="5u*";;
-                       "8") cpu_port="8u*";;
-               esac
-       }
-}
-
-boot_hook_add preinit_main set_preinit_iface
-boot_hook_add preinit_main init_iface
+boot_hook_add preinit_main preinit_iface

diff --git a/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm b/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm
deleted file mode 100644 (file)
index 7e030ac..0000000
--- a/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/sh
-
-failsafe_ip() {
-       [ -d /proc/switch/eth0 ] && [ "$ifname" = "eth0" ] && {
-               # The switch will connect all ports, The switch will leak
-               # packages from wan to lan and vice versa in failsafe mode
-               echo 1 > /proc/switch/eth0/reset
-               echo 1 > /proc/switch/eth0/enable
-               echo 0 > /proc/switch/eth0/enable_vlan
-               echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/1/ports
-       }
-
-       [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
-               ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up
-       }
-}
-
-boot_hook_add failsafe failsafe_ip

diff --git a/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm
index bc749398f55c55942c3ce6544b76341012c634f8..aab50bf1a9b48deefec434c6b36b89ed0eae0004 100644 (file)
--- a/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm
+++ b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm
@@ -1,34 +1,16 @@
 #!/bin/sh
 
-preinit_net_echo_send() {
-       preinit_ip
+preinit_ip() {
+       # if the preinit interface isn't specified and ifname is set in
+       # preinit.arch use that interface
+       if [ -z "$pi_ifname" ]; then
+               pi_ifname=$ifname
+       fi
 
-       [ -d /proc/switch/eth0 ] && [ "$pi_ifname" = "eth0" ] && {
-
-               echo 1 > /proc/switch/eth0/reset
-               echo 1 > /proc/switch/eth0/enable
-               echo 1 > /proc/switch/eth0/enable_vlan
-
-               # this would be easier if we blasted the message across all ports
-               # but we don't want packets leaking across interfaces
-               for port in $(seq 0 4); do {
-
-                       echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/1/ports
-                       sleep 1
-
-                       netmsg $pi_broadcast "$1"
-               }; done
-
-       } || netmsg $pi_broadcast "$1"
-}
-
-preinit_net_echo() {
        [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
-               { 
-                       [ "$pi_preinit_net_messages" = "y" ] || {
-                               [ "$pi_failsafe_net_message"  = "true" ] && 
-                                   [ "$pi_preinit_no_failsafe_netmsg" != "y" ] 
-                        }
-               } && preinit_net_echo_send $1
-       }
+               ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up
+
+               local try=0;
+               while [ $((try++)) -le 5 ] && [ ! $(cat /sys/class/net/$pi_ifname/operstate) == "up" ]; do sleep 1; done
+       }
 }