: ${ALL_TESTS:="
ping_ipv4
+ test_flood
"}
NUM_NETIFS=6
ping_test $h1 192.0.2.4 ": local->remote 2"
}
+maybe_in_ns()
+{
+ echo ${1:+in_ns} $1
+}
+
+__flood_counter_add_del()
+{
+ local add_del=$1; shift
+ local dev=$1; shift
+ local ns=$1; shift
+
+ # Putting the ICMP capture both to HW and to SW will end up
+ # double-counting the packets that are trapped to slow path, such as for
+ # the unicast test. Adding either skip_hw or skip_sw fixes this problem,
+ # but with skip_hw, the flooded packets are not counted at all, because
+ # those are dropped due to MAC address mismatch; and skip_sw is a no-go
+ # for veth-based topologies.
+ #
+ # So try to install with skip_sw and fall back to skip_sw if that fails.
+
+ $(maybe_in_ns $ns) __icmp_capture_add_del \
+ $add_del 100 "" $dev skip_sw 2>/dev/null || \
+ $(maybe_in_ns $ns) __icmp_capture_add_del \
+ $add_del 100 "" $dev skip_hw
+}
+
+flood_counter_install()
+{
+ __flood_counter_add_del add "$@"
+}
+
+flood_counter_uninstall()
+{
+ __flood_counter_add_del del "$@"
+}
+
+flood_fetch_stat()
+{
+ local dev=$1; shift
+ local ns=$1; shift
+
+ $(maybe_in_ns $ns) tc_rule_stats_get $dev 100 ingress
+}
+
+flood_fetch_stats()
+{
+ local counters=("${@}")
+ local counter
+
+ for counter in "${counters[@]}"; do
+ flood_fetch_stat $counter
+ done
+}
+
+vxlan_flood_test()
+{
+ local mac=$1; shift
+ local dst=$1; shift
+ local -a expects=("${@}")
+
+ local -a counters=($h2 "vx2 ns1" "vx2 ns2")
+ local counter
+ local key
+
+ for counter in "${counters[@]}"; do
+ flood_counter_install $counter
+ done
+
+ local -a t0s=($(flood_fetch_stats "${counters[@]}"))
+ $MZ $h1 -c 10 -d 100msec -p 64 -b $mac -B $dst -t icmp -q
+ sleep 1
+ local -a t1s=($(flood_fetch_stats "${counters[@]}"))
+
+ for key in ${!t0s[@]}; do
+ local delta=$((t1s[$key] - t0s[$key]))
+ local expect=${expects[$key]}
+
+ ((expect == delta))
+ check_err $? "${counters[$key]}: Expected to capture $expect packets, got $delta."
+ done
+
+ for counter in "${counters[@]}"; do
+ flood_counter_uninstall $counter
+ done
+}
+
+__test_flood()
+{
+ local mac=$1; shift
+ local dst=$1; shift
+ local what=$1; shift
+
+ RET=0
+
+ vxlan_flood_test $mac $dst 10 10 10
+
+ log_test "VXLAN: $what"
+}
+
+test_flood()
+{
+ __test_flood de:ad:be:ef:13:37 192.0.2.100 "flood"
+}
+
test_all()
{
echo "Running tests with UDP port $VXPORT"