+++ /dev/null
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_ADVANCED_OPTIONS is not set
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_MMAP_RND_BITS=11
-CONFIG_ARCH_MMAP_RND_BITS_MAX=17
-CONFIG_ARCH_MMAP_RND_BITS_MIN=11
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SPLIT_ARG64=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
-CONFIG_ASN1=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOOKE=y
-CONFIG_BOOKE_OR_40x=y
-CONFIG_BOOKE_WDT=y
-# CONFIG_BR200_WP is not set
-# CONFIG_BSC9131_RDB is not set
-# CONFIG_BSC9132_QDS is not set
-# CONFIG_C293_PCIE is not set
-CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
-CONFIG_CC_NO_ARRAY_BOUNDS=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CLZ_TAB=y
-CONFIG_CMDLINE="console=ttyS0,115200"
-CONFIG_CMDLINE_FROM_BOOTLOADER=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_COMMON_CLK is not set
-CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
-CONFIG_COMPAT_32BIT_TIME=y
-# CONFIG_CORENET_GENERIC is not set
-# CONFIG_CPM2 is not set
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CRYPTO_AES_PPC_SPE is not set
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
-CONFIG_CRYPTO_LIB_SHA1=y
-CONFIG_CRYPTO_LIB_UTILS=y
-# CONFIG_CRYPTO_MD5_PPC is not set
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RSA=y
-# CONFIG_CRYPTO_SHA1_PPC is not set
-# CONFIG_CRYPTO_SHA1_PPC_SPE is not set
-# CONFIG_CRYPTO_SHA256_PPC_SPE is not set
-CONFIG_DATA_SHIFT=24
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_E500_CPU=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-# CONFIG_EDAC_DEBUG is not set
-CONFIG_EDAC_LEGACY_SYSFS=y
-CONFIG_EDAC_MPC85XX=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EXCLUSIVE_SYSTEM_RAM=y
-# CONFIG_FIREBOX_T10 is not set
-CONFIG_FIXED_PHY=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_FSL_FMAN is not set
-CONFIG_FSL_LBC=y
-CONFIG_FSL_PCI=y
-CONFIG_FSL_PQ_MDIO=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_SOC_BOOKE=y
-CONFIG_FWNODE_MDIO=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_FW_LOADER_SYSFS=y
-CONFIG_GCC11_NO_ARRAY_BOUNDS=y
-CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GEN_RTC=y
-# CONFIG_GE_IMP3A is not set
-CONFIG_GIANFAR=y
-CONFIG_GPIO_CDEV=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_MPC8XXX=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HIVEAP_330 is not set
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_MPC=y
-CONFIG_ILLEGAL_POINTER_VALUE=0
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_ISA_DMA_API=y
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_KSI8560 is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOWMEM_CAM_NUM=9
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LXT_PHY=y
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MIGRATION=y
-CONFIG_MMU_GATHER_MERGE_VMAS=y
-CONFIG_MMU_GATHER_PAGE_SIZE=y
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC85xx_RDB is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_MSGR is not set
-CONFIG_MPIC_TIMER=y
-CONFIG_MPILIB=y
-# CONFIG_MSM460 is not set
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NOR=y
-# CONFIG_MVME2500 is not set
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_SELFTESTS=y
-CONFIG_NLS=y
-CONFIG_NR_CPUS=1
-CONFIG_NR_IRQS=512
-CONFIG_NVMEM=y
-CONFIG_NVMEM_LAYOUTS=y
-# CONFIG_NVMEM_QORIQ_EFUSE is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DMA_DEFAULT_COHERENT=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND=y
-# CONFIG_P1010_RDB is not set
-# CONFIG_P1022_DS is not set
-# CONFIG_P1022_RDK is not set
-# CONFIG_P1023_RDB is not set
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_PAGE_POOL=y
-CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
-CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
-# CONFIG_PANDA is not set
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEASPM=y
-CONFIG_PCIEASPM_DEFAULT=y
-# CONFIG_PCIEASPM_PERFORMANCE is not set
-# CONFIG_PCIEASPM_POWERSAVE is not set
-# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLIB_LEDS=y
-CONFIG_PHYSICAL_ALIGN=0x04000000
-CONFIG_PHYSICAL_START=0x00000000
-# CONFIG_PHYS_64BIT is not set
-# CONFIG_PMU_SYSFS is not set
-# CONFIG_PPA8548 is not set
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_PPC64 is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=0
-CONFIG_PPC_ADV_DEBUG_IACS=2
-CONFIG_PPC_ADV_DEBUG_REGS=y
-CONFIG_PPC_BARRIER_NOSPEC=y
-# CONFIG_PPC_BOOK3S_32 is not set
-CONFIG_PPC_DOORBELL=y
-CONFIG_PPC_E500=y
-# CONFIG_PPC_E500MC is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PPC_KUAP=y
-# CONFIG_PPC_KUAP_DEBUG is not set
-CONFIG_PPC_KUEP=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_PAGE_SHIFT=12
-# CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT is not set
-# CONFIG_PPC_QEMU_E500 is not set
-CONFIG_PPC_SMP_MUXED_IPI=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_PPC_WERROR=y
-CONFIG_PREEMPT_NONE_BUILD=y
-CONFIG_PTP_1588_CLOCK_OPTIONAL=y
-CONFIG_QE_GPIO=y
-CONFIG_QUICC_ENGINE=y
-CONFIG_RANDSTRUCT_NONE=y
-CONFIG_RAS=y
-# CONFIG_RED_15W_REV1 is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_GENERIC=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-# CONFIG_SCOM_DEBUGFS is not set
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_QE is not set
-# CONFIG_SOCRATES is not set
-CONFIG_SOFTIRQ_ON_OWN_STACK=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPE=y
-CONFIG_SPE_POSSIBLE=y
-CONFIG_SPI=y
-CONFIG_SPI_FSL_ESPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SRCU=y
-# CONFIG_STATIC_CALL_SELFTEST is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_STX_GP3 is not set
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_TARGET_CPU="8540"
-CONFIG_TARGET_CPU_BOOL=y
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_THREAD_SHIFT=13
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-# CONFIG_TL_WDR4900_V1 is not set
-# CONFIG_TOOLCHAIN_DEFAULT_CPU is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_TWR_P102x is not set
-CONFIG_UCC=y
-CONFIG_UCC_FAST=y
-CONFIG_UCC_GETH=y
-# CONFIG_UGETH_TX_ON_DEMAND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_VDSO32=y
-# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WS_AP3710I is not set
-# CONFIG_WS_AP3715I is not set
-# CONFIG_WS_AP3825I is not set
-# CONFIG_XES_MPC85xx is not set
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_POWERPC=y
+++ /dev/null
---- a/arch/powerpc/platforms/85xx/common.c
-+++ b/arch/powerpc/platforms/85xx/common.c
-@@ -30,6 +30,7 @@ static const struct of_device_id mpc85xx
- { .compatible = "fsl,mpc8548-guts", },
- /* Probably unnecessary? */
- { .compatible = "gpio-leds", },
-+ { .compatible = "gpio-keys", },
- /* For all PCI controllers */
- { .compatible = "fsl,mpc8540-pci", },
- { .compatible = "fsl,mpc8548-pcie", },
+++ /dev/null
-From b30ba76a980b3a9282f309c23e3bb0b0eb2c72cd Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Thu, 30 May 2024 02:55:38 +0200
-Subject: [PATCH] powerpc: add compressed zImage for mpc85xx
-
-Add a universal zImage which can be loaded by mpc85xx boards at
-load address 0x3000000. This allows boards to boot kernels larger than
-16MB even if the image is loaded temporarily from NAND at offset
-0x1000000 which some bootloaders do by default.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- arch/powerpc/boot/Makefile | 1 +
- arch/powerpc/boot/wrapper | 5 +++++
- 2 files changed, 6 insertions(+)
-
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -175,6 +175,7 @@ src-plat-$(CONFIG_EMBEDDED6xx) += cuboot
- src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c
- src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
- src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c
-+src-plat-$(CONFIG_PPC_ZIMAGE_LA3000000) += fixed-head.S
- src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S
- src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
- src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
-@@ -345,6 +346,7 @@ image-$(CONFIG_MPC836x_MDS) += cuImage.
- image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot
-
- # Board ports in arch/powerpc/platform/85xx/Kconfig
-+image-$(CONFIG_PPC_ZIMAGE_LA3000000) += zImage.la3000000
- image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads
- image-$(CONFIG_MPC8560_ADS) += cuImage.mpc8560ads
- image-$(CONFIG_MPC85xx_CDS) += cuImage.mpc8541cds \
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -254,6 +254,11 @@ if [ -n "$esm_blob" -a "$platform" != "p
- fi
-
- case "$platform" in
-+la3000000)
-+ binary=y
-+ platformo="$object/fixed-head.o $object/of.o $object/epapr.o"
-+ link_address='0x3000000'
-+ ;;
- of)
- platformo="$object/of.o $object/epapr.o"
- make_space=n
---- a/arch/powerpc/Kconfig
-+++ b/arch/powerpc/Kconfig
-@@ -74,6 +74,10 @@ config NMI_IPI
- depends on SMP && (DEBUGGER || KEXEC_CORE || HARDLOCKUP_DETECTOR)
- default y
-
-+config PPC_ZIMAGE_LA3000000
-+ bool
-+ default n
-+
- config PPC_WATCHDOG
- bool
- depends on HARDLOCKUP_DETECTOR
+++ /dev/null
-From 1d9f596e572917772b87a2a37e1680902964782f Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 20 Feb 2013 08:40:33 +0100
-Subject: [PATCH] powerpc: 85xx: add support for the TP-Link TL-WDR4900 v1
- board
-
-This patch adds support for the TP-Link TL-WDR4900 v1
-concurrent dual-band wireless router. The devices uses
-the Freescale P1014 SoC.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- arch/powerpc/boot/Makefile | 3 ++-
- arch/powerpc/boot/wrapper | 5 +++++
- arch/powerpc/platforms/85xx/Kconfig | 12 ++++++++++++
- arch/powerpc/platforms/85xx/Makefile | 1 +
- 4 files changed, 20 insertions(+), 1 deletion(-)
-
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -180,6 +180,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie
- src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
- src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
- src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
-+src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
-
- src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c
-
-@@ -361,7 +362,7 @@ image-$(CONFIG_TQM8548) += cuImage.tqm
- image-$(CONFIG_TQM8555) += cuImage.tqm8555
- image-$(CONFIG_TQM8560) += cuImage.tqm8560
- image-$(CONFIG_KSI8560) += cuImage.ksi8560
--
-+image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1
- # Board ports in arch/powerpc/platform/86xx/Kconfig
- image-$(CONFIG_MVME7100) += dtbImage.mvme7100
-
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -346,6 +346,11 @@ adder875-redboot)
- platformo="$object/fixed-head.o $object/redboot-8xx.o"
- binary=y
- ;;
-+simpleboot-tl-wdr4900-v1)
-+ platformo="$object/fixed-head.o $object/simpleboot.o"
-+ link_address='0x1500000'
-+ binary=y
-+ ;;
- simpleboot-*)
- platformo="$object/fixed-head.o $object/simpleboot.o"
- binary=y
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -163,6 +163,18 @@ config STX_GP3
- select CPM2
- select DEFAULT_UIMAGE
-
-+config TL_WDR4900_V1
-+ bool "TP-Link TL-WDR4900 v1"
-+ select DEFAULT_UIMAGE
-+ select ARCH_REQUIRE_GPIOLIB
-+ select GPIO_MPC8XXX
-+ select SWIOTLB
-+ help
-+ This option enables support for the TP-Link TL-WDR4900 v1 board.
-+
-+ This board is a Concurrent Dual-Band wireless router with a
-+ Freescale P1014 SoC.
-+
- config TQM8540
- bool "TQ Components TQM8540"
- help
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -27,6 +27,7 @@ obj-$(CONFIG_TWR_P102x) += twr_p102x.o
- obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
- obj-$(CONFIG_STX_GP3) += stx_gp3.o
-+obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
- obj-$(CONFIG_TQM85xx) += tqm85xx.o
- obj-$(CONFIG_PPA8548) += ppa8548.o
- obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
+++ /dev/null
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -40,6 +40,17 @@ config BSC9132_QDS
- and dual StarCore SC3850 DSP cores.
- Manufacturer : Freescale Semiconductor, Inc
-
-+config HIVEAP_330
-+ bool "Aerohive HiveAP-330"
-+ select DEFAULT_UIMAGE
-+ select ARCH_REQUIRE_GPIOLIB
-+ select GPIO_MPC8XXX
-+ help
-+ This option enables support for the Aerohive HiveAP-330 board.
-+
-+ This board is a Concurrent Dual-Band wireless access point with a
-+ Freescale P1020 SoC.
-+
- config MPC8540_ADS
- bool "Freescale MPC8540 ADS"
- select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -12,6 +12,7 @@ obj-y += common.o
- obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
- obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o
- obj-$(CONFIG_C293_PCIE) += c293pcie.o
-+obj-$(CONFIG_HIVEAP_330) += hiveap-330.o
- obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
- obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
- obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -180,6 +180,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie
- src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
- src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
- src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
-+src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S
- src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
-
- src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c
-@@ -362,6 +363,7 @@ image-$(CONFIG_TQM8548) += cuImage.tqm
- image-$(CONFIG_TQM8555) += cuImage.tqm8555
- image-$(CONFIG_TQM8560) += cuImage.tqm8560
- image-$(CONFIG_KSI8560) += cuImage.ksi8560
-+image-$(CONFIG_HIVEAP_330) += simpleImage.hiveap-330
- image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1
- # Board ports in arch/powerpc/platform/86xx/Kconfig
- image-$(CONFIG_MVME7100) += dtbImage.mvme7100
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -346,6 +346,7 @@ adder875-redboot)
- platformo="$object/fixed-head.o $object/redboot-8xx.o"
- binary=y
- ;;
-+simpleboot-hiveap-330|\
- simpleboot-tl-wdr4900-v1)
- platformo="$object/fixed-head.o $object/simpleboot.o"
- link_address='0x1500000'
+++ /dev/null
---- a/arch/powerpc/Kconfig
-+++ b/arch/powerpc/Kconfig
-@@ -958,6 +958,14 @@ config CMDLINE_FORCE
-
- endchoice
-
-+config CMDLINE_OVERRIDE
-+ bool "Use alternative cmdline from device tree"
-+ help
-+ Some bootloaders may have uneditable bootargs. While CMDLINE_FORCE can
-+ be used, this is not a good option for kernels that are shared across
-+ devices. This setting enables using "chosen/cmdline-override" as the
-+ cmdline if it exists in the device tree.
-+
- config EXTRA_TARGETS
- string "Additional default image types"
- help
---- a/drivers/of/fdt.c
-+++ b/drivers/of/fdt.c
-@@ -1187,6 +1187,17 @@ int __init early_init_dt_scan_chosen(cha
- if (p != NULL && l > 0)
- strlcat(cmdline, p, min_t(int, strlen(cmdline) + (int)l, COMMAND_LINE_SIZE));
-
-+ /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different
-+ * device tree option of chosen/bootargs-override. This is
-+ * helpful on boards where u-boot sets bootargs, and is unable
-+ * to be modified.
-+ */
-+#ifdef CONFIG_CMDLINE_OVERRIDE
-+ p = of_get_flat_dt_prop(node, "bootargs-override", &l);
-+ if (p != NULL && l > 0)
-+ strlcpy(cmdline, p, min((int)l, COMMAND_LINE_SIZE));
-+#endif
-+
- handle_cmdline:
- /*
- * CONFIG_CMDLINE is meant to be a default in case nothing else
+++ /dev/null
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -166,6 +166,16 @@ config XES_MPC85xx
- Manufacturer: Extreme Engineering Solutions, Inc.
- URL: <https://www.xes-inc.com/>
-
-+config RED_15W_REV1
-+ bool "Sophos RED 15w Rev.1"
-+ select DEFAULT_UIMAGE
-+ select ARCH_REQUIRE_GPIOLIB
-+ select GPIO_MPC8XXX
-+ help
-+ This option enables support for the Sophos RED 15w Rev.1 board.
-+
-+ This board is a wireless VPN router with a Freescale P1010 SoC.
-+
- config STX_GP3
- bool "Silicon Turnkey Express GP3"
- help
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -27,6 +27,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
- obj-$(CONFIG_TWR_P102x) += twr_p102x.o
- obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
-+obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o
- obj-$(CONFIG_STX_GP3) += stx_gp3.o
- obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
- obj-$(CONFIG_TQM85xx) += tqm85xx.o
+++ /dev/null
-From 93514afd769c305182beeed1f9c4c46235879ef8 Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Sun, 30 Dec 2018 23:24:41 +0100
-Subject: [PATCH] powerpc: mpc85xx: change P2020RDB dts file for OpenWRT
-
-This patch apply chages for OpenWRT in P2020RDB
-dts file.
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- arch/powerpc/boot/dts/fsl/p2020rdb.dts | 98 +++++++++++++++++---------
- 1 file changed, 63 insertions(+), 35 deletions(-)
-
---- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts
-+++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
-@@ -5,10 +5,15 @@
- * Copyright 2009-2012 Freescale Semiconductor Inc.
- */
-
-+/dts-v1/;
-+
- /include/ "p2020si-pre.dtsi"
-
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+
- / {
-- model = "fsl,P2020RDB";
-+ model = "Freescale P2020RDB";
- compatible = "fsl,P2020RDB";
-
- aliases {
-@@ -34,48 +39,38 @@
- 0x2 0x0 0x0 0xffb00000 0x00020000>;
-
- nor@0,0 {
-- #address-cells = <1>;
-- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x1000000>;
- bank-width = <2>;
- device-width = <1>;
-
-- partition@0 {
-- /* This location must not be altered */
-- /* 256KB for Vitesse 7385 Switch firmware */
-- reg = <0x0 0x00040000>;
-- label = "NOR (RO) Vitesse-7385 Firmware";
-- read-only;
-- };
--
-- partition@40000 {
-- /* 256KB for DTB Image */
-- reg = <0x00040000 0x00040000>;
-- label = "NOR (RO) DTB Image";
-- read-only;
-- };
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-
-- partition@80000 {
-- /* 3.5 MB for Linux Kernel Image */
-- reg = <0x00080000 0x00380000>;
-- label = "NOR (RO) Linux Kernel Image";
-- read-only;
-- };
-+ partition@0 {
-+ /* This location must not be altered */
-+ /* 256KB for Vitesse 7385 Switch firmware */
-+ reg = <0x0 0x00040000>;
-+ label = "NOR (RO) Vitesse-7385 Firmware";
-+ read-only;
-+ };
-
-- partition@400000 {
-- /* 11MB for JFFS2 based Root file System */
-- reg = <0x00400000 0x00b00000>;
-- label = "NOR (RW) JFFS2 Root File System";
-- };
-+ partition@40000 {
-+ compatible = "denx,fit";
-+ reg = <0x00040000 0x00ec0000>;
-+ label = "firmware";
-+ };
-
-- partition@f00000 {
-- /* This location must not be altered */
-- /* 512KB for u-boot Bootloader Image */
-- /* 512KB for u-boot Environment Variables */
-- reg = <0x00f00000 0x00100000>;
-- label = "NOR (RO) U-Boot Image";
-- read-only;
-+ partition@f00000 {
-+ /* This location must not be altered */
-+ /* 512KB for u-boot Bootloader Image */
-+ /* 512KB for u-boot Environment Variables */
-+ reg = <0x00f00000 0x00100000>;
-+ label = "u-boot";
-+ read-only;
-+ };
- };
- };
-
-@@ -85,6 +80,7 @@
- compatible = "fsl,p2020-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x1 0x0 0x40000>;
-+ nand-ecc-mode = "none";
-
- partition@0 {
- /* This location must not be altered */
-@@ -140,13 +136,43 @@
- soc: soc@ffe00000 {
- ranges = <0x0 0x0 0xffe00000 0x100000>;
-
-+ gpio0: gpio-controller@fc00 {
-+ };
-+
- i2c@3000 {
-+ temperature-sensor@4c {
-+ compatible = "adi,adt7461";
-+ reg = <0x4c>;
-+ };
-+
-+ eeprom@50 {
-+ compatible = "atmel,24c256";
-+ reg = <0x50>;
-+ };
-+
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
- };
- };
-
-+ i2c@3100 {
-+ pmic@11 {
-+ compatible = "zl2006";
-+ reg = <0x11>;
-+ };
-+
-+ gpio@18 {
-+ compatible = "nxp,pca9557";
-+ reg = <0x18>;
-+ };
-+
-+ eeprom@52 {
-+ compatible = "atmel,24c01";
-+ reg = <0x52>;
-+ };
-+ };
-+
- spi@7000 {
- flash@0 {
- #address-cells = <1>;
-@@ -200,10 +226,12 @@
- phy0: ethernet-phy@0 {
- interrupts = <3 1 0 0>;
- reg = <0x0>;
-+ reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- phy1: ethernet-phy@1 {
- interrupts = <3 1 0 0>;
- reg = <0x1>;
-+ reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
- };
- tbi-phy@2 {
- device_type = "tbi-phy";
+++ /dev/null
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -51,6 +51,17 @@ config HIVEAP_330
- This board is a Concurrent Dual-Band wireless access point with a
- Freescale P1020 SoC.
-
-+config PANDA
-+ bool "OCEDO PANDA"
-+ select DEFAULT_UIMAGE
-+ select ARCH_REQUIRE_GPIOLIB
-+ select GPIO_MPC8XXX
-+ help
-+ This option enables support for the OCEDO PANDA board.
-+
-+ This board is a Concurrent Dual-Band wireless access point with a
-+ Freescale P1020 SoC.
-+
- config MPC8540_ADS
- bool "Freescale MPC8540 ADS"
- select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_P1010_RDB) += p1010rdb.o
- obj-$(CONFIG_P1022_DS) += p1022_ds.o
- obj-$(CONFIG_P1022_RDK) += p1022_rdk.o
- obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
-+obj-$(CONFIG_PANDA) += panda.o
- obj-$(CONFIG_TWR_P102x) += twr_p102x.o
- obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
+++ /dev/null
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -62,6 +62,17 @@ config PANDA
- This board is a Concurrent Dual-Band wireless access point with a
- Freescale P1020 SoC.
-
-+config WS_AP3710I
-+ bool "Enterasys WS-AP3710i"
-+ select DEFAULT_UIMAGE
-+ select ARCH_REQUIRE_GPIOLIB
-+ select GPIO_MPC8XXX
-+ help
-+ This option enables support for the Enterasys WS-AP3710i board.
-+
-+ This board is a Concurrent Dual-Band wireless access point with a
-+ Freescale P1020 SoC.
-+
- config MPC8540_ADS
- bool "Freescale MPC8540 ADS"
- select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -26,6 +26,7 @@ obj-$(CONFIG_P1022_RDK) += p1022_rdk.o
- obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
- obj-$(CONFIG_PANDA) += panda.o
- obj-$(CONFIG_TWR_P102x) += twr_p102x.o
-+obj-$(CONFIG_WS_AP3710I) += ws-ap3710i.o
- obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
- obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -182,6 +182,7 @@ src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) +=
- src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
- src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S
- src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
-+src-plat-$(CONFIG_WS_AP3710I) += simpleboot.c fixed-head.S
-
- src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c
-
-@@ -365,6 +366,7 @@ image-$(CONFIG_TQM8560) += cuImage.tqm
- image-$(CONFIG_KSI8560) += cuImage.ksi8560
- image-$(CONFIG_HIVEAP_330) += simpleImage.hiveap-330
- image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1
-+image-$(CONFIG_WS_AP3710I) += simpleImage.ws-ap3710i
- # Board ports in arch/powerpc/platform/86xx/Kconfig
- image-$(CONFIG_MVME7100) += dtbImage.mvme7100
-
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -347,7 +347,8 @@ adder875-redboot)
- binary=y
- ;;
- simpleboot-hiveap-330|\
--simpleboot-tl-wdr4900-v1)
-+simpleboot-tl-wdr4900-v1|\
-+simpleboot-ws-ap3710i)
- platformo="$object/fixed-head.o $object/simpleboot.o"
- link_address='0x1500000'
- binary=y
+++ /dev/null
-From 2fa1a7983ef30f3c7486f9b07c001bee87d1f6d6 Mon Sep 17 00:00:00 2001
-From: Martin Kennedy <hurricos@gmail.com>
-Date: Sat, 1 Jan 2022 11:01:37 -0500
-Subject: [PATCH] PowerPC 85xx: Add WS-AP3825i support
-
-This patch adds support for building Linux for the Extreme Networks
-WS-AP3825i AP.
-
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -73,6 +73,16 @@ config WS_AP3710I
- This board is a Concurrent Dual-Band wireless access point with a
- Freescale P1020 SoC.
-
-+config WS_AP3825I
-+ bool "Extreme Networks WS-AP3825i"
-+ select DEFAULT_UIMAGE
-+ select ARCH_REQUIRE_GPIOLIB
-+ select GPIO_MPC8XXX
-+ help
-+ This option enables support for the Extreme Networks WS-AP3825i board.
-+ This board is a Concurrent Dual-Band wireless access point with a
-+ Freescale P1020 SoC.
-+
- config MPC8540_ADS
- bool "Freescale MPC8540 ADS"
- select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -27,6 +27,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
- obj-$(CONFIG_PANDA) += panda.o
- obj-$(CONFIG_TWR_P102x) += twr_p102x.o
- obj-$(CONFIG_WS_AP3710I) += ws-ap3710i.o
-+obj-$(CONFIG_WS_AP3825I) += ws-ap3825i.o
- obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
- obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -183,6 +183,7 @@ src-plat-$(CONFIG_MVME7100) += motload-h
- src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S
- src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
- src-plat-$(CONFIG_WS_AP3710I) += simpleboot.c fixed-head.S
-+src-plat-$(CONFIG_WS_AP3825I) += simpleboot.c fixed-head.S
-
- src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c
-
-@@ -367,6 +368,7 @@ image-$(CONFIG_KSI8560) += cuImage.ksi
- image-$(CONFIG_HIVEAP_330) += simpleImage.hiveap-330
- image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1
- image-$(CONFIG_WS_AP3710I) += simpleImage.ws-ap3710i
-+image-$(CONFIG_WS_AP3825I) += simpleImage.ws-ap3825i
- # Board ports in arch/powerpc/platform/86xx/Kconfig
- image-$(CONFIG_MVME7100) += dtbImage.mvme7100
-
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -348,7 +348,8 @@ adder875-redboot)
- ;;
- simpleboot-hiveap-330|\
- simpleboot-tl-wdr4900-v1|\
--simpleboot-ws-ap3710i)
-+simpleboot-ws-ap3710i|\
-+simpleboot-ws-ap3825i)
- platformo="$object/fixed-head.o $object/simpleboot.o"
- link_address='0x1500000'
- binary=y
+++ /dev/null
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -83,6 +83,16 @@ config WS_AP3825I
- This board is a Concurrent Dual-Band wireless access point with a
- Freescale P1020 SoC.
-
-+config FIREBOX_T10
-+ bool "Watchguard Firebox T10"
-+ select DEFAULT_UIMAGE
-+ select ARCH_REQUIRE_GPIOLIB
-+ select GPIO_MPC8XXX
-+ help
-+ This option enables support for the Watchguard Firebox T10 board.
-+ This board is a VPN Gateway-Router with a
-+ Freescale P1010 SoC.
-+
- config MPC8540_ADS
- bool "Freescale MPC8540 ADS"
- select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -28,6 +28,7 @@ obj-$(CONFIG_PANDA) += panda.o
- obj-$(CONFIG_TWR_P102x) += twr_p102x.o
- obj-$(CONFIG_WS_AP3710I) += ws-ap3710i.o
- obj-$(CONFIG_WS_AP3825I) += ws-ap3825i.o
-+obj-$(CONFIG_FIREBOX_T10) += firebox_t10.o
- obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
- obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o
+++ /dev/null
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -73,6 +73,17 @@ config WS_AP3710I
- This board is a Concurrent Dual-Band wireless access point with a
- Freescale P1020 SoC.
-
-+config WS_AP3715I
-+ bool "Enterasys WS-AP3715i"
-+ select DEFAULT_UIMAGE
-+ select ARCH_REQUIRE_GPIOLIB
-+ select GPIO_MPC8XXX
-+ help
-+ This option enables support for the Enterasys WS-AP3715i board.
-+
-+ This board is a Concurrent Dual-Band wireless access point with a
-+ Freescale P1010 SoC.
-+
- config WS_AP3825I
- bool "Extreme Networks WS-AP3825i"
- select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -27,6 +27,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
- obj-$(CONFIG_PANDA) += panda.o
- obj-$(CONFIG_TWR_P102x) += twr_p102x.o
- obj-$(CONFIG_WS_AP3710I) += ws-ap3710i.o
-+obj-$(CONFIG_WS_AP3715I) += ws-ap3715i.o
- obj-$(CONFIG_WS_AP3825I) += ws-ap3825i.o
- obj-$(CONFIG_FIREBOX_T10) += firebox_t10.o
- obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -183,6 +183,7 @@ src-plat-$(CONFIG_MVME7100) += motload-h
- src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S
- src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
- src-plat-$(CONFIG_WS_AP3710I) += simpleboot.c fixed-head.S
-+src-plat-$(CONFIG_WS_AP3715I) += simpleboot.c fixed-head.S
- src-plat-$(CONFIG_WS_AP3825I) += simpleboot.c fixed-head.S
-
- src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c
-@@ -368,6 +369,7 @@ image-$(CONFIG_KSI8560) += cuImage.ksi
- image-$(CONFIG_HIVEAP_330) += simpleImage.hiveap-330
- image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1
- image-$(CONFIG_WS_AP3710I) += simpleImage.ws-ap3710i
-+image-$(CONFIG_WS_AP3715I) += simpleImage.ws-ap3715i
- image-$(CONFIG_WS_AP3825I) += simpleImage.ws-ap3825i
- # Board ports in arch/powerpc/platform/86xx/Kconfig
- image-$(CONFIG_MVME7100) += dtbImage.mvme7100
+++ /dev/null
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -40,6 +40,16 @@ config BSC9132_QDS
- and dual StarCore SC3850 DSP cores.
- Manufacturer : Freescale Semiconductor, Inc
-
-+config BR200_WP
-+ bool "Aerohive BR200-WP"
-+ select DEFAULT_UIMAGE
-+ select ARCH_REQUIRE_GPIOLIB
-+ select GPIO_MPC8XXX
-+ help
-+ This option enables support for the Aerohive BR200-WP board.
-+
-+ This board is a wireless router with a Freescale P1011 SoC.
-+
- config HIVEAP_330
- bool "Aerohive HiveAP-330"
- select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -12,6 +12,7 @@ obj-y += common.o
- obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
- obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o
- obj-$(CONFIG_C293_PCIE) += c293pcie.o
-+obj-$(CONFIG_BR200_WP) += br200-wp.o
- obj-$(CONFIG_HIVEAP_330) += hiveap-330.o
- obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
- obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -180,6 +180,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie
- src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
- src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
- src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
-+src-plat-$(CONFIG_BR200_WP) += simpleboot.c fixed-head.S
- src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S
- src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
- src-plat-$(CONFIG_WS_AP3710I) += simpleboot.c fixed-head.S
-@@ -366,6 +367,7 @@ image-$(CONFIG_TQM8548) += cuImage.tqm
- image-$(CONFIG_TQM8555) += cuImage.tqm8555
- image-$(CONFIG_TQM8560) += cuImage.tqm8560
- image-$(CONFIG_KSI8560) += cuImage.ksi8560
-+image-$(CONFIG_BR200_WP) += simpleImage.br200-wp
- image-$(CONFIG_HIVEAP_330) += simpleImage.hiveap-330
- image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1
- image-$(CONFIG_WS_AP3710I) += simpleImage.ws-ap3710i
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -346,6 +346,7 @@ adder875-redboot)
- platformo="$object/fixed-head.o $object/redboot-8xx.o"
- binary=y
- ;;
-+simpleboot-br200-wp|\
- simpleboot-hiveap-330|\
- simpleboot-tl-wdr4900-v1|\
- simpleboot-ws-ap3710i|\
+++ /dev/null
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -114,6 +114,18 @@ config FIREBOX_T10
- This board is a VPN Gateway-Router with a
- Freescale P1010 SoC.
-
-+config MSM460
-+ bool "HPE MSM460"
-+ select DEFAULT_UIMAGE
-+ select ARCH_REQUIRE_GPIOLIB
-+ select GPIO_MPC8XXX
-+ select PPC_ZIMAGE_LA3000000
-+ help
-+ This option enables support for the HPE MSM460 board.
-+
-+ This board is a Concurrent Dual-Band wireless access point with a
-+ Freescale P1020 SoC.
-+
- config MPC8540_ADS
- bool "Freescale MPC8540 ADS"
- select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -21,6 +21,7 @@ obj-$(CONFIG_MPC8536_DS) += mpc8536_ds.
- obj-$(CONFIG_MPC85xx_DS) += mpc85xx_ds.o
- obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
- obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
-+obj-$(CONFIG_MSM460) += msm460.o
- obj-$(CONFIG_P1010_RDB) += p1010rdb.o
- obj-$(CONFIG_P1022_DS) += p1022_ds.o
- obj-$(CONFIG_P1022_RDK) += p1022_rdk.o
+++ /dev/null
-From 5f856ccc34df25060d36a5a81b7b45b574d86e35 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sun, 3 Dec 2023 20:09:24 +0100
-Subject: [PATCH] arch: powerpc: simpleboot: prevent overwrite of CPU1
- spin-table
-
-Don't overwrite the spin-table of additional CPU cores with loader-heap.
-
-U-Boot places the spin-table for CPU1 on P1020 SoCs in the top 1MB of
-system-memory. Instead of parsing reserved-memory (which would be
-considerable more work), reduce the available system-memory for the
-loader by 1MB.
-
-This prevents the loader from overwriting the spin-table of
-additional CPU cores on these platforms.
-
-Linux itself needs to be made aware by this using reserved-memory
-definitions.
-
-This patch is required for using CPU1 on the Extreme Networks
-WS-AP3825i.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- arch/powerpc/boot/simpleboot.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/powerpc/boot/simpleboot.c
-+++ b/arch/powerpc/boot/simpleboot.c
-@@ -65,6 +65,11 @@ void platform_init(unsigned long r3, uns
- if (sizeof(void *) == 4 && memsize64 >= 0x100000000ULL)
- memsize64 = 0xffffffff;
-
-+ /* Reserve upper 1 MB of memory for CPU1 spin-table */
-+ if (memsize64 > 0x100000) {
-+ memsize64 = memsize64 - 0x100000;
-+ }
-+
- /* finally, setup the timebase */
- node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
- "cpu", sizeof("cpu"));
+++ /dev/null
-From d43ab14605510d9d2bd257a8cd70f24ada4621b0 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sat, 29 Feb 2020 14:27:04 +0100
-Subject: [PATCH] powerpc: bootwrapper: disable uImage generation
-
-Due to CONFIG_KERNEL_XZ symbol, the bootwrapper code tries to
-instruct the mkimage to use the xz compression, which isn't
-supported. This disables the uImage generation, as OpenWrt
-generates individual uImages for each board using it's own
-toolchain.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- arch/powerpc/boot/Makefile | 9 ---------
- 1 file changed, 9 deletions(-)
-
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -294,7 +294,6 @@ image-$(CONFIG_PPC_CHRP) += zImage.chrp
- image-$(CONFIG_PPC_EFIKA) += zImage.chrp
- image-$(CONFIG_PPC_PMAC) += zImage.pmac
- image-$(CONFIG_PPC_HOLLY) += dtbImage.holly
--image-$(CONFIG_DEFAULT_UIMAGE) += uImage
- image-$(CONFIG_EPAPR_BOOT) += zImage.epapr
-
- #
-@@ -432,15 +431,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits
- $(obj)/vmlinux.strip: vmlinux
- $(STRIP) -s -R .comment $< -o $@
-
--$(obj)/uImage: vmlinux $(wrapperbits) FORCE
-- $(call if_changed,wrap,uboot)
--
--$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
-- $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
--
--$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
-- $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb)
--
- $(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
- $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
-
projects / openwrt / staging / blocktrron.git / commitdiff