ar71xx: add kernel support for the AP136-020 board

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34884

diff --git a/target/linux/ar71xx/patches-3.6/609-MIPS-ath79-ap136-fixes.patch b/target/linux/ar71xx/patches-3.6/609-MIPS-ath79-ap136-fixes.patch
index d2852fb7cb8a5963ee0c3291e0ff3d8f5ba95a3c..c8d61060006f18fdb518fd170a43e7ed0c7ea25e 100644 (file)
--- a/target/linux/ar71xx/patches-3.6/609-MIPS-ath79-ap136-fixes.patch
+++ b/target/linux/ar71xx/patches-3.6/609-MIPS-ath79-ap136-fixes.patch
@@ -56,7 +56,7 @@
  
  static struct gpio_led ap136_leds_gpio[] __initdata = {
        {
-@@ -98,64 +104,105 @@ static struct gpio_keys_button ap136_gpi
+@@ -98,64 +104,136 @@ static struct gpio_keys_button ap136_gpi
        },
  };
  
@@ -138,7 +138,8 @@
 -static inline void ap136_pci_init(void) {}
 -#endif /* CONFIG_PCI */
  
- static void __init ap136_setup(void)
+-static void __init ap136_setup(void)
++static void __init ap136_common_setup(void)
  {
        u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
  
@@ -167,45 +168,78 @@
 +      mdiobus_register_board_info(ap136_mdio0_info,
 +                                  ARRAY_SIZE(ap136_mdio0_info));
 +
++      /* GMAC0 is connected to the RMGII interface */
++      ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++      ath79_eth0_data.phy_mask = BIT(0);
++      ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++
++      ath79_register_eth(0);
++
++      /* GMAC1 is connected tot eh SGMII interface */
++      ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
++      ath79_eth1_data.speed = SPEED_1000;
++      ath79_eth1_data.duplex = DUPLEX_FULL;
++
++      ath79_register_eth(1);
++}
++
++static void __init ap136_010_setup(void)
++{
++      /* GMAC0 of the AR8327 switch is connected to GMAC0 via RGMII */
 +      ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
 +      ap136_ar8327_pad0_cfg.txclk_delay_en = true;
 +      ap136_ar8327_pad0_cfg.rxclk_delay_en = true;
 +      ap136_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
 +      ap136_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
 +
++      /* GMAC6 of the AR8327 switch is connected to GMAC1 via SGMII */
 +      ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
 +      ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
 +      ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
 +
-+      /* GMAC0 is connected to GMAC0 of the AR8327 switch via RGMII */
-+      ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+      ath79_eth0_data.phy_mask = BIT(0);
-+      ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
 +      ath79_eth0_pll_data.pll_1000 = 0xa6000000;
++      ath79_eth1_pll_data.pll_1000 = 0x03000101;
 +
-+      ath79_register_eth(0);
++      ap136_common_setup();
++}
 +
-+      /* GMAC1 is connected to GMAC6 of the AR8327 switch via SGMII */
-+      ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
-+      ath79_eth1_data.speed = SPEED_1000;
-+      ath79_eth1_data.duplex = DUPLEX_FULL;
++MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
++           "Atheros AP136-010 reference board",
++           ap136_010_setup);
++
++static void __init ap136_020_setup(void)
++{
++      /* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
++      ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII;
++      ap136_ar8327_pad0_cfg.sgmii_delay_en = true;
++
++      /* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */
++      ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_RGMII;
++      ap136_ar8327_pad6_cfg.txclk_delay_en = true;
++      ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
++      ap136_ar8327_pad6_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
++      ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
++
++      ath79_eth0_pll_data.pll_1000 = 0x56000000;
 +      ath79_eth1_pll_data.pll_1000 = 0x03000101;
 +
-+      ath79_register_eth(1);
++      ap136_common_setup();
  }
  
 -MIPS_MACHINE(ATH79_MACH_AP136, "AP136", "Atheros AP136 reference board",
-+MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
-+           "Atheros AP136-010 reference board",
-            ap136_setup);
+-           ap136_setup);
++MIPS_MACHINE(ATH79_MACH_AP136_020, "AP136-020",
++           "Atheros AP136-020 reference board",
++           ap136_020_setup);
 --- a/arch/mips/ath79/machtypes.h
 +++ b/arch/mips/ath79/machtypes.h
-@@ -18,7 +18,7 @@ enum ath79_mach_type {
+@@ -18,7 +18,8 @@ enum ath79_mach_type {
        ATH79_MACH_GENERIC = 0,
        ATH79_MACH_AP121,               /* Atheros AP121 reference board */
        ATH79_MACH_AP121_MINI,          /* Atheros AP121-MINI reference board */
 -      ATH79_MACH_AP136,               /* Atheros AP136 reference board */
 +      ATH79_MACH_AP136_010,           /* Atheros AP136-010 reference board */
++      ATH79_MACH_AP136_020,           /* Atheros AP136-020 reference board */
        ATH79_MACH_AP81,                /* Atheros AP81 reference board */
        ATH79_MACH_DB120,               /* Atheros DB120 reference board */
        ATH79_MACH_PB44,                /* Atheros PB44 reference board */

diff --git a/target/linux/ar71xx/patches-3.6/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.6/610-MIPS-ath79-openwrt-machines.patch
index 21cfc76550bca133c45961d8e385428a050e98ec..6eb4e5ab37155bc1810e89835345bc982ebf5ada 100644 (file)
--- a/target/linux/ar71xx/patches-3.6/610-MIPS-ath79-openwrt-machines.patch
+++ b/target/linux/ar71xx/patches-3.6/610-MIPS-ath79-openwrt-machines.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/ath79/machtypes.h
 +++ b/arch/mips/ath79/machtypes.h
-@@ -16,20 +16,110 @@
+@@ -16,21 +16,111 @@
  
  enum ath79_mach_type {
        ATH79_MACH_GENERIC = 0,
@@ -13,6 +13,7 @@
        ATH79_MACH_AP121,               /* Atheros AP121 reference board */
        ATH79_MACH_AP121_MINI,          /* Atheros AP121-MINI reference board */
        ATH79_MACH_AP136_010,           /* Atheros AP136-010 reference board */
+       ATH79_MACH_AP136_020,           /* Atheros AP136-020 reference board */
        ATH79_MACH_AP81,                /* Atheros AP81 reference board */
 +      ATH79_MACH_AP83,                /* Atheros AP83 */
 +      ATH79_MACH_AP96,                /* Atheros AP96 */