+++ /dev/null
-The Definitive KVM (Kernel-based Virtual Machine) API Documentation
-===================================================================
-
-1. General description
-
-The kvm API is a set of ioctls that are issued to control various aspects
-of a virtual machine. The ioctls belong to three classes
-
- - System ioctls: These query and set global attributes which affect the
- whole kvm subsystem. In addition a system ioctl is used to create
- virtual machines
-
- - VM ioctls: These query and set attributes that affect an entire virtual
- machine, for example memory layout. In addition a VM ioctl is used to
- create virtual cpus (vcpus).
-
- Only run VM ioctls from the same process (address space) that was used
- to create the VM.
-
- - vcpu ioctls: These query and set attributes that control the operation
- of a single virtual cpu.
-
- Only run vcpu ioctls from the same thread that was used to create the
- vcpu.
-
-2. File descriptors
-
-The kvm API is centered around file descriptors. An initial
-open("/dev/kvm") obtains a handle to the kvm subsystem; this handle
-can be used to issue system ioctls. A KVM_CREATE_VM ioctl on this
-handle will create a VM file descriptor which can be used to issue VM
-ioctls. A KVM_CREATE_VCPU ioctl on a VM fd will create a virtual cpu
-and return a file descriptor pointing to it. Finally, ioctls on a vcpu
-fd can be used to control the vcpu, including the important task of
-actually running guest code.
-
-In general file descriptors can be migrated among processes by means
-of fork() and the SCM_RIGHTS facility of unix domain socket. These
-kinds of tricks are explicitly not supported by kvm. While they will
-not cause harm to the host, their actual behavior is not guaranteed by
-the API. The only supported use is one virtual machine per process,
-and one vcpu per thread.
-
-3. Extensions
-
-As of Linux 2.6.22, the KVM ABI has been stabilized: no backward
-incompatible change are allowed. However, there is an extension
-facility that allows backward-compatible extensions to the API to be
-queried and used.
-
-The extension mechanism is not based on on the Linux version number.
-Instead, kvm defines extension identifiers and a facility to query
-whether a particular extension identifier is available. If it is, a
-set of ioctls is available for application use.
-
-4. API description
-
-This section describes ioctls that can be used to control kvm guests.
-For each ioctl, the following information is provided along with a
-description:
-
- Capability: which KVM extension provides this ioctl. Can be 'basic',
- which means that is will be provided by any kernel that supports
- API version 12 (see section 4.1), or a KVM_CAP_xyz constant, which
- means availability needs to be checked with KVM_CHECK_EXTENSION
- (see section 4.4).
-
- Architectures: which instruction set architectures provide this ioctl.
- x86 includes both i386 and x86_64.
-
- Type: system, vm, or vcpu.
-
- Parameters: what parameters are accepted by the ioctl.
-
- Returns: the return value. General error numbers (EBADF, ENOMEM, EINVAL)
- are not detailed, but errors with specific meanings are.
-
-4.1 KVM_GET_API_VERSION
-
-Capability: basic
-Architectures: all
-Type: system ioctl
-Parameters: none
-Returns: the constant KVM_API_VERSION (=12)
-
-This identifies the API version as the stable kvm API. It is not
-expected that this number will change. However, Linux 2.6.20 and
-2.6.21 report earlier versions; these are not documented and not
-supported. Applications should refuse to run if KVM_GET_API_VERSION
-returns a value other than 12. If this check passes, all ioctls
-described as 'basic' will be available.
-
-4.2 KVM_CREATE_VM
-
-Capability: basic
-Architectures: all
-Type: system ioctl
-Parameters: none
-Returns: a VM fd that can be used to control the new virtual machine.
-
-The new VM has no virtual cpus and no memory. An mmap() of a VM fd
-will access the virtual machine's physical address space; offset zero
-corresponds to guest physical address zero. Use of mmap() on a VM fd
-is discouraged if userspace memory allocation (KVM_CAP_USER_MEMORY) is
-available.
-
-4.3 KVM_GET_MSR_INDEX_LIST
-
-Capability: basic
-Architectures: x86
-Type: system
-Parameters: struct kvm_msr_list (in/out)
-Returns: 0 on success; -1 on error
-Errors:
- E2BIG: the msr index list is to be to fit in the array specified by
- the user.
-
-struct kvm_msr_list {
- __u32 nmsrs; /* number of msrs in entries */
- __u32 indices[0];
-};
-
-This ioctl returns the guest msrs that are supported. The list varies
-by kvm version and host processor, but does not change otherwise. The
-user fills in the size of the indices array in nmsrs, and in return
-kvm adjusts nmsrs to reflect the actual number of msrs and fills in
-the indices array with their numbers.
-
-Note: if kvm indicates supports MCE (KVM_CAP_MCE), then the MCE bank MSRs are
-not returned in the MSR list, as different vcpus can have a different number
-of banks, as set via the KVM_X86_SETUP_MCE ioctl.
-
-4.4 KVM_CHECK_EXTENSION
-
-Capability: basic
-Architectures: all
-Type: system ioctl
-Parameters: extension identifier (KVM_CAP_*)
-Returns: 0 if unsupported; 1 (or some other positive integer) if supported
-
-The API allows the application to query about extensions to the core
-kvm API. Userspace passes an extension identifier (an integer) and
-receives an integer that describes the extension availability.
-Generally 0 means no and 1 means yes, but some extensions may report
-additional information in the integer return value.
-
-4.5 KVM_GET_VCPU_MMAP_SIZE
-
-Capability: basic
-Architectures: all
-Type: system ioctl
-Parameters: none
-Returns: size of vcpu mmap area, in bytes
-
-The KVM_RUN ioctl (cf.) communicates with userspace via a shared
-memory region. This ioctl returns the size of that region. See the
-KVM_RUN documentation for details.
-
-4.6 KVM_SET_MEMORY_REGION
-
-Capability: basic
-Architectures: all
-Type: vm ioctl
-Parameters: struct kvm_memory_region (in)
-Returns: 0 on success, -1 on error
-
-This ioctl is obsolete and has been removed.
-
-4.7 KVM_CREATE_VCPU
-
-Capability: basic
-Architectures: all
-Type: vm ioctl
-Parameters: vcpu id (apic id on x86)
-Returns: vcpu fd on success, -1 on error
-
-This API adds a vcpu to a virtual machine. The vcpu id is a small integer
-in the range [0, max_vcpus).
-
-4.8 KVM_GET_DIRTY_LOG (vm ioctl)
-
-Capability: basic
-Architectures: x86
-Type: vm ioctl
-Parameters: struct kvm_dirty_log (in/out)
-Returns: 0 on success, -1 on error
-
-/* for KVM_GET_DIRTY_LOG */
-struct kvm_dirty_log {
- __u32 slot;
- __u32 padding;
- union {
- void __user *dirty_bitmap; /* one bit per page */
- __u64 padding;
- };
-};
-
-Given a memory slot, return a bitmap containing any pages dirtied
-since the last call to this ioctl. Bit 0 is the first page in the
-memory slot. Ensure the entire structure is cleared to avoid padding
-issues.
-
-4.9 KVM_SET_MEMORY_ALIAS
-
-Capability: basic
-Architectures: x86
-Type: vm ioctl
-Parameters: struct kvm_memory_alias (in)
-Returns: 0 (success), -1 (error)
-
-This ioctl is obsolete and has been removed.
-
-4.10 KVM_RUN
-
-Capability: basic
-Architectures: all
-Type: vcpu ioctl
-Parameters: none
-Returns: 0 on success, -1 on error
-Errors:
- EINTR: an unmasked signal is pending
-
-This ioctl is used to run a guest virtual cpu. While there are no
-explicit parameters, there is an implicit parameter block that can be
-obtained by mmap()ing the vcpu fd at offset 0, with the size given by
-KVM_GET_VCPU_MMAP_SIZE. The parameter block is formatted as a 'struct
-kvm_run' (see below).
-
-4.11 KVM_GET_REGS
-
-Capability: basic
-Architectures: all
-Type: vcpu ioctl
-Parameters: struct kvm_regs (out)
-Returns: 0 on success, -1 on error
-
-Reads the general purpose registers from the vcpu.
-
-/* x86 */
-struct kvm_regs {
- /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */
- __u64 rax, rbx, rcx, rdx;
- __u64 rsi, rdi, rsp, rbp;
- __u64 r8, r9, r10, r11;
- __u64 r12, r13, r14, r15;
- __u64 rip, rflags;
-};
-
-4.12 KVM_SET_REGS
-
-Capability: basic
-Architectures: all
-Type: vcpu ioctl
-Parameters: struct kvm_regs (in)
-Returns: 0 on success, -1 on error
-
-Writes the general purpose registers into the vcpu.
-
-See KVM_GET_REGS for the data structure.
-
-4.13 KVM_GET_SREGS
-
-Capability: basic
-Architectures: x86
-Type: vcpu ioctl
-Parameters: struct kvm_sregs (out)
-Returns: 0 on success, -1 on error
-
-Reads special registers from the vcpu.
-
-/* x86 */
-struct kvm_sregs {
- struct kvm_segment cs, ds, es, fs, gs, ss;
- struct kvm_segment tr, ldt;
- struct kvm_dtable gdt, idt;
- __u64 cr0, cr2, cr3, cr4, cr8;
- __u64 efer;
- __u64 apic_base;
- __u64 interrupt_bitmap[(KVM_NR_INTERRUPTS + 63) / 64];
-};
-
-interrupt_bitmap is a bitmap of pending external interrupts. At most
-one bit may be set. This interrupt has been acknowledged by the APIC
-but not yet injected into the cpu core.
-
-4.14 KVM_SET_SREGS
-
-Capability: basic
-Architectures: x86
-Type: vcpu ioctl
-Parameters: struct kvm_sregs (in)
-Returns: 0 on success, -1 on error
-
-Writes special registers into the vcpu. See KVM_GET_SREGS for the
-data structures.
-
-4.15 KVM_TRANSLATE
-
-Capability: basic
-Architectures: x86
-Type: vcpu ioctl
-Parameters: struct kvm_translation (in/out)
-Returns: 0 on success, -1 on error
-
-Translates a virtual address according to the vcpu's current address
-translation mode.
-
-struct kvm_translation {
- /* in */
- __u64 linear_address;
-
- /* out */
- __u64 physical_address;
- __u8 valid;
- __u8 writeable;
- __u8 usermode;
- __u8 pad[5];
-};
-
-4.16 KVM_INTERRUPT
-
-Capability: basic
-Architectures: x86, ppc
-Type: vcpu ioctl
-Parameters: struct kvm_interrupt (in)
-Returns: 0 on success, -1 on error
-
-Queues a hardware interrupt vector to be injected. This is only
-useful if in-kernel local APIC or equivalent is not used.
-
-/* for KVM_INTERRUPT */
-struct kvm_interrupt {
- /* in */
- __u32 irq;
-};
-
-X86:
-
-Note 'irq' is an interrupt vector, not an interrupt pin or line.
-
-PPC:
-
-Queues an external interrupt to be injected. This ioctl is overleaded
-with 3 different irq values:
-
-a) KVM_INTERRUPT_SET
-
- This injects an edge type external interrupt into the guest once it's ready
- to receive interrupts. When injected, the interrupt is done.
-
-b) KVM_INTERRUPT_UNSET
-
- This unsets any pending interrupt.
-
- Only available with KVM_CAP_PPC_UNSET_IRQ.
-
-c) KVM_INTERRUPT_SET_LEVEL
-
- This injects a level type external interrupt into the guest context. The
- interrupt stays pending until a specific ioctl with KVM_INTERRUPT_UNSET
- is triggered.
-
- Only available with KVM_CAP_PPC_IRQ_LEVEL.
-
-Note that any value for 'irq' other than the ones stated above is invalid
-and incurs unexpected behavior.
-
-4.17 KVM_DEBUG_GUEST
-
-Capability: basic
-Architectures: none
-Type: vcpu ioctl
-Parameters: none)
-Returns: -1 on error
-
-Support for this has been removed. Use KVM_SET_GUEST_DEBUG instead.
-
-4.18 KVM_GET_MSRS
-
-Capability: basic
-Architectures: x86
-Type: vcpu ioctl
-Parameters: struct kvm_msrs (in/out)
-Returns: 0 on success, -1 on error
-
-Reads model-specific registers from the vcpu. Supported msr indices can
-be obtained using KVM_GET_MSR_INDEX_LIST.
-
-struct kvm_msrs {
- __u32 nmsrs; /* number of msrs in entries */
- __u32 pad;
-
- struct kvm_msr_entry entries[0];
-};
-
-struct kvm_msr_entry {
- __u32 index;
- __u32 reserved;
- __u64 data;
-};
-
-Application code should set the 'nmsrs' member (which indicates the
-size of the entries array) and the 'index' member of each array entry.
-kvm will fill in the 'data' member.
-
-4.19 KVM_SET_MSRS
-
-Capability: basic
-Architectures: x86
-Type: vcpu ioctl
-Parameters: struct kvm_msrs (in)
-Returns: 0 on success, -1 on error
-
-Writes model-specific registers to the vcpu. See KVM_GET_MSRS for the
-data structures.
-
-Application code should set the 'nmsrs' member (which indicates the
-size of the entries array), and the 'index' and 'data' members of each
-array entry.
-
-4.20 KVM_SET_CPUID
-
-Capability: basic
-Architectures: x86
-Type: vcpu ioctl
-Parameters: struct kvm_cpuid (in)
-Returns: 0 on success, -1 on error
-
-Defines the vcpu responses to the cpuid instruction. Applications
-should use the KVM_SET_CPUID2 ioctl if available.
-
-
-struct kvm_cpuid_entry {
- __u32 function;
- __u32 eax;
- __u32 ebx;
- __u32 ecx;
- __u32 edx;
- __u32 padding;
-};
-
-/* for KVM_SET_CPUID */
-struct kvm_cpuid {
- __u32 nent;
- __u32 padding;
- struct kvm_cpuid_entry entries[0];
-};
-
-4.21 KVM_SET_SIGNAL_MASK
-
-Capability: basic
-Architectures: x86
-Type: vcpu ioctl
-Parameters: struct kvm_signal_mask (in)
-Returns: 0 on success, -1 on error
-
-Defines which signals are blocked during execution of KVM_RUN. This
-signal mask temporarily overrides the threads signal mask. Any
-unblocked signal received (except SIGKILL and SIGSTOP, which retain
-their traditional behaviour) will cause KVM_RUN to return with -EINTR.
-
-Note the signal will only be delivered if not blocked by the original
-signal mask.
-
-/* for KVM_SET_SIGNAL_MASK */
-struct kvm_signal_mask {
- __u32 len;
- __u8 sigset[0];
-};
-
-4.22 KVM_GET_FPU
-
-Capability: basic
-Architectures: x86
-Type: vcpu ioctl
-Parameters: struct kvm_fpu (out)
-Returns: 0 on success, -1 on error
-
-Reads the floating point state from the vcpu.
-
-/* for KVM_GET_FPU and KVM_SET_FPU */
-struct kvm_fpu {
- __u8 fpr[8][16];
- __u16 fcw;
- __u16 fsw;
- __u8 ftwx; /* in fxsave format */
- __u8 pad1;
- __u16 last_opcode;
- __u64 last_ip;
- __u64 last_dp;
- __u8 xmm[16][16];
- __u32 mxcsr;
- __u32 pad2;
-};
-
-4.23 KVM_SET_FPU
-
-Capability: basic
-Architectures: x86
-Type: vcpu ioctl
-Parameters: struct kvm_fpu (in)
-Returns: 0 on success, -1 on error
-
-Writes the floating point state to the vcpu.
-
-/* for KVM_GET_FPU and KVM_SET_FPU */
-struct kvm_fpu {
- __u8 fpr[8][16];
- __u16 fcw;
- __u16 fsw;
- __u8 ftwx; /* in fxsave format */
- __u8 pad1;
- __u16 last_opcode;
- __u64 last_ip;
- __u64 last_dp;
- __u8 xmm[16][16];
- __u32 mxcsr;
- __u32 pad2;
-};
-
-4.24 KVM_CREATE_IRQCHIP
-
-Capability: KVM_CAP_IRQCHIP
-Architectures: x86, ia64
-Type: vm ioctl
-Parameters: none
-Returns: 0 on success, -1 on error
-
-Creates an interrupt controller model in the kernel. On x86, creates a virtual
-ioapic, a virtual PIC (two PICs, nested), and sets up future vcpus to have a
-local APIC. IRQ routing for GSIs 0-15 is set to both PIC and IOAPIC; GSI 16-23
-only go to the IOAPIC. On ia64, a IOSAPIC is created.
-
-4.25 KVM_IRQ_LINE
-
-Capability: KVM_CAP_IRQCHIP
-Architectures: x86, ia64
-Type: vm ioctl
-Parameters: struct kvm_irq_level
-Returns: 0 on success, -1 on error
-
-Sets the level of a GSI input to the interrupt controller model in the kernel.
-Requires that an interrupt controller model has been previously created with
-KVM_CREATE_IRQCHIP. Note that edge-triggered interrupts require the level
-to be set to 1 and then back to 0.
-
-struct kvm_irq_level {
- union {
- __u32 irq; /* GSI */
- __s32 status; /* not used for KVM_IRQ_LEVEL */
- };
- __u32 level; /* 0 or 1 */
-};
-
-4.26 KVM_GET_IRQCHIP
-
-Capability: KVM_CAP_IRQCHIP
-Architectures: x86, ia64
-Type: vm ioctl
-Parameters: struct kvm_irqchip (in/out)
-Returns: 0 on success, -1 on error
-
-Reads the state of a kernel interrupt controller created with
-KVM_CREATE_IRQCHIP into a buffer provided by the caller.
-
-struct kvm_irqchip {
- __u32 chip_id; /* 0 = PIC1, 1 = PIC2, 2 = IOAPIC */
- __u32 pad;
- union {
- char dummy[512]; /* reserving space */
- struct kvm_pic_state pic;
- struct kvm_ioapic_state ioapic;
- } chip;
-};
-
-4.27 KVM_SET_IRQCHIP
-
-Capability: KVM_CAP_IRQCHIP
-Architectures: x86, ia64
-Type: vm ioctl
-Parameters: struct kvm_irqchip (in)
-Returns: 0 on success, -1 on error
-
-Sets the state of a kernel interrupt controller created with
-KVM_CREATE_IRQCHIP from a buffer provided by the caller.
-
-struct kvm_irqchip {
- __u32 chip_id; /* 0 = PIC1, 1 = PIC2, 2 = IOAPIC */
- __u32 pad;
- union {
- char dummy[512]; /* reserving space */
- struct kvm_pic_state pic;
- struct kvm_ioapic_state ioapic;
- } chip;
-};
-
-4.28 KVM_XEN_HVM_CONFIG
-
-Capability: KVM_CAP_XEN_HVM
-Architectures: x86
-Type: vm ioctl
-Parameters: struct kvm_xen_hvm_config (in)
-Returns: 0 on success, -1 on error
-
-Sets the MSR that the Xen HVM guest uses to initialize its hypercall
-page, and provides the starting address and size of the hypercall
-blobs in userspace. When the guest writes the MSR, kvm copies one
-page of a blob (32- or 64-bit, depending on the vcpu mode) to guest
-memory.
-
-struct kvm_xen_hvm_config {
- __u32 flags;
- __u32 msr;
- __u64 blob_addr_32;
- __u64 blob_addr_64;
- __u8 blob_size_32;
- __u8 blob_size_64;
- __u8 pad2[30];
-};
-
-4.29 KVM_GET_CLOCK
-
-Capability: KVM_CAP_ADJUST_CLOCK
-Architectures: x86
-Type: vm ioctl
-Parameters: struct kvm_clock_data (out)
-Returns: 0 on success, -1 on error
-
-Gets the current timestamp of kvmclock as seen by the current guest. In
-conjunction with KVM_SET_CLOCK, it is used to ensure monotonicity on scenarios
-such as migration.
-
-struct kvm_clock_data {
- __u64 clock; /* kvmclock current value */
- __u32 flags;
- __u32 pad[9];
-};
-
-4.30 KVM_SET_CLOCK
-
-Capability: KVM_CAP_ADJUST_CLOCK
-Architectures: x86
-Type: vm ioctl
-Parameters: struct kvm_clock_data (in)
-Returns: 0 on success, -1 on error
-
-Sets the current timestamp of kvmclock to the value specified in its parameter.
-In conjunction with KVM_GET_CLOCK, it is used to ensure monotonicity on scenarios
-such as migration.
-
-struct kvm_clock_data {
- __u64 clock; /* kvmclock current value */
- __u32 flags;
- __u32 pad[9];
-};
-
-4.31 KVM_GET_VCPU_EVENTS
-
-Capability: KVM_CAP_VCPU_EVENTS
-Extended by: KVM_CAP_INTR_SHADOW
-Architectures: x86
-Type: vm ioctl
-Parameters: struct kvm_vcpu_event (out)
-Returns: 0 on success, -1 on error
-
-Gets currently pending exceptions, interrupts, and NMIs as well as related
-states of the vcpu.
-
-struct kvm_vcpu_events {
- struct {
- __u8 injected;
- __u8 nr;
- __u8 has_error_code;
- __u8 pad;
- __u32 error_code;
- } exception;
- struct {
- __u8 injected;
- __u8 nr;
- __u8 soft;
- __u8 shadow;
- } interrupt;
- struct {
- __u8 injected;
- __u8 pending;
- __u8 masked;
- __u8 pad;
- } nmi;
- __u32 sipi_vector;
- __u32 flags;
-};
-
-KVM_VCPUEVENT_VALID_SHADOW may be set in the flags field to signal that
-interrupt.shadow contains a valid state. Otherwise, this field is undefined.
-
-4.32 KVM_SET_VCPU_EVENTS
-
-Capability: KVM_CAP_VCPU_EVENTS
-Extended by: KVM_CAP_INTR_SHADOW
-Architectures: x86
-Type: vm ioctl
-Parameters: struct kvm_vcpu_event (in)
-Returns: 0 on success, -1 on error
-
-Set pending exceptions, interrupts, and NMIs as well as related states of the
-vcpu.
-
-See KVM_GET_VCPU_EVENTS for the data structure.
-
-Fields that may be modified asynchronously by running VCPUs can be excluded
-from the update. These fields are nmi.pending and sipi_vector. Keep the
-corresponding bits in the flags field cleared to suppress overwriting the
-current in-kernel state. The bits are:
-
-KVM_VCPUEVENT_VALID_NMI_PENDING - transfer nmi.pending to the kernel
-KVM_VCPUEVENT_VALID_SIPI_VECTOR - transfer sipi_vector
-
-If KVM_CAP_INTR_SHADOW is available, KVM_VCPUEVENT_VALID_SHADOW can be set in
-the flags field to signal that interrupt.shadow contains a valid state and
-shall be written into the VCPU.
-
-4.33 KVM_GET_DEBUGREGS
-
-Capability: KVM_CAP_DEBUGREGS
-Architectures: x86
-Type: vm ioctl
-Parameters: struct kvm_debugregs (out)
-Returns: 0 on success, -1 on error
-
-Reads debug registers from the vcpu.
-
-struct kvm_debugregs {
- __u64 db[4];
- __u64 dr6;
- __u64 dr7;
- __u64 flags;
- __u64 reserved[9];
-};
-
-4.34 KVM_SET_DEBUGREGS
-
-Capability: KVM_CAP_DEBUGREGS
-Architectures: x86
-Type: vm ioctl
-Parameters: struct kvm_debugregs (in)
-Returns: 0 on success, -1 on error
-
-Writes debug registers into the vcpu.
-
-See KVM_GET_DEBUGREGS for the data structure. The flags field is unused
-yet and must be cleared on entry.
-
-4.35 KVM_SET_USER_MEMORY_REGION
-
-Capability: KVM_CAP_USER_MEM
-Architectures: all
-Type: vm ioctl
-Parameters: struct kvm_userspace_memory_region (in)
-Returns: 0 on success, -1 on error
-
-struct kvm_userspace_memory_region {
- __u32 slot;
- __u32 flags;
- __u64 guest_phys_addr;
- __u64 memory_size; /* bytes */
- __u64 userspace_addr; /* start of the userspace allocated memory */
-};
-
-/* for kvm_memory_region::flags */
-#define KVM_MEM_LOG_DIRTY_PAGES 1UL
-
-This ioctl allows the user to create or modify a guest physical memory
-slot. When changing an existing slot, it may be moved in the guest
-physical memory space, or its flags may be modified. It may not be
-resized. Slots may not overlap in guest physical address space.
-
-Memory for the region is taken starting at the address denoted by the
-field userspace_addr, which must point at user addressable memory for
-the entire memory slot size. Any object may back this memory, including
-anonymous memory, ordinary files, and hugetlbfs.
-
-It is recommended that the lower 21 bits of guest_phys_addr and userspace_addr
-be identical. This allows large pages in the guest to be backed by large
-pages in the host.
-
-The flags field supports just one flag, KVM_MEM_LOG_DIRTY_PAGES, which
-instructs kvm to keep track of writes to memory within the slot. See
-the KVM_GET_DIRTY_LOG ioctl.
-
-When the KVM_CAP_SYNC_MMU capability, changes in the backing of the memory
-region are automatically reflected into the guest. For example, an mmap()
-that affects the region will be made visible immediately. Another example
-is madvise(MADV_DROP).
-
-It is recommended to use this API instead of the KVM_SET_MEMORY_REGION ioctl.
-The KVM_SET_MEMORY_REGION does not allow fine grained control over memory
-allocation and is deprecated.
-
-4.36 KVM_SET_TSS_ADDR
-
-Capability: KVM_CAP_SET_TSS_ADDR
-Architectures: x86
-Type: vm ioctl
-Parameters: unsigned long tss_address (in)
-Returns: 0 on success, -1 on error
-
-This ioctl defines the physical address of a three-page region in the guest
-physical address space. The region must be within the first 4GB of the
-guest physical address space and must not conflict with any memory slot
-or any mmio address. The guest may malfunction if it accesses this memory
-region.
-
-This ioctl is required on Intel-based hosts. This is needed on Intel hardware
-because of a quirk in the virtualization implementation (see the internals
-documentation when it pops into existence).
-
-4.37 KVM_ENABLE_CAP
-
-Capability: KVM_CAP_ENABLE_CAP
-Architectures: ppc
-Type: vcpu ioctl
-Parameters: struct kvm_enable_cap (in)
-Returns: 0 on success; -1 on error
-
-+Not all extensions are enabled by default. Using this ioctl the application
-can enable an extension, making it available to the guest.
-
-On systems that do not support this ioctl, it always fails. On systems that
-do support it, it only works for extensions that are supported for enablement.
-
-To check if a capability can be enabled, the KVM_CHECK_EXTENSION ioctl should
-be used.
-
-struct kvm_enable_cap {
- /* in */
- __u32 cap;
-
-The capability that is supposed to get enabled.
-
- __u32 flags;
-
-A bitfield indicating future enhancements. Has to be 0 for now.
-
- __u64 args[4];
-
-Arguments for enabling a feature. If a feature needs initial values to
-function properly, this is the place to put them.
-
- __u8 pad[64];
-};
-
-4.38 KVM_GET_MP_STATE
-
-Capability: KVM_CAP_MP_STATE
-Architectures: x86, ia64
-Type: vcpu ioctl
-Parameters: struct kvm_mp_state (out)
-Returns: 0 on success; -1 on error
-
-struct kvm_mp_state {
- __u32 mp_state;
-};
-
-Returns the vcpu's current "multiprocessing state" (though also valid on
-uniprocessor guests).
-
-Possible values are:
-
- - KVM_MP_STATE_RUNNABLE: the vcpu is currently running
- - KVM_MP_STATE_UNINITIALIZED: the vcpu is an application processor (AP)
- which has not yet received an INIT signal
- - KVM_MP_STATE_INIT_RECEIVED: the vcpu has received an INIT signal, and is
- now ready for a SIPI
- - KVM_MP_STATE_HALTED: the vcpu has executed a HLT instruction and
- is waiting for an interrupt
- - KVM_MP_STATE_SIPI_RECEIVED: the vcpu has just received a SIPI (vector
- accessible via KVM_GET_VCPU_EVENTS)
-
-This ioctl is only useful after KVM_CREATE_IRQCHIP. Without an in-kernel
-irqchip, the multiprocessing state must be maintained by userspace.
-
-4.39 KVM_SET_MP_STATE
-
-Capability: KVM_CAP_MP_STATE
-Architectures: x86, ia64
-Type: vcpu ioctl
-Parameters: struct kvm_mp_state (in)
-Returns: 0 on success; -1 on error
-
-Sets the vcpu's current "multiprocessing state"; see KVM_GET_MP_STATE for
-arguments.
-
-This ioctl is only useful after KVM_CREATE_IRQCHIP. Without an in-kernel
-irqchip, the multiprocessing state must be maintained by userspace.
-
-4.40 KVM_SET_IDENTITY_MAP_ADDR
-
-Capability: KVM_CAP_SET_IDENTITY_MAP_ADDR
-Architectures: x86
-Type: vm ioctl
-Parameters: unsigned long identity (in)
-Returns: 0 on success, -1 on error
-
-This ioctl defines the physical address of a one-page region in the guest
-physical address space. The region must be within the first 4GB of the
-guest physical address space and must not conflict with any memory slot
-or any mmio address. The guest may malfunction if it accesses this memory
-region.
-
-This ioctl is required on Intel-based hosts. This is needed on Intel hardware
-because of a quirk in the virtualization implementation (see the internals
-documentation when it pops into existence).
-
-4.41 KVM_SET_BOOT_CPU_ID
-
-Capability: KVM_CAP_SET_BOOT_CPU_ID
-Architectures: x86, ia64
-Type: vm ioctl
-Parameters: unsigned long vcpu_id
-Returns: 0 on success, -1 on error
-
-Define which vcpu is the Bootstrap Processor (BSP). Values are the same
-as the vcpu id in KVM_CREATE_VCPU. If this ioctl is not called, the default
-is vcpu 0.
-
-4.42 KVM_GET_XSAVE
-
-Capability: KVM_CAP_XSAVE
-Architectures: x86
-Type: vcpu ioctl
-Parameters: struct kvm_xsave (out)
-Returns: 0 on success, -1 on error
-
-struct kvm_xsave {
- __u32 region[1024];
-};
-
-This ioctl would copy current vcpu's xsave struct to the userspace.
-
-4.43 KVM_SET_XSAVE
-
-Capability: KVM_CAP_XSAVE
-Architectures: x86
-Type: vcpu ioctl
-Parameters: struct kvm_xsave (in)
-Returns: 0 on success, -1 on error
-
-struct kvm_xsave {
- __u32 region[1024];
-};
-
-This ioctl would copy userspace's xsave struct to the kernel.
-
-4.44 KVM_GET_XCRS
-
-Capability: KVM_CAP_XCRS
-Architectures: x86
-Type: vcpu ioctl
-Parameters: struct kvm_xcrs (out)
-Returns: 0 on success, -1 on error
-
-struct kvm_xcr {
- __u32 xcr;
- __u32 reserved;
- __u64 value;
-};
-
-struct kvm_xcrs {
- __u32 nr_xcrs;
- __u32 flags;
- struct kvm_xcr xcrs[KVM_MAX_XCRS];
- __u64 padding[16];
-};
-
-This ioctl would copy current vcpu's xcrs to the userspace.
-
-4.45 KVM_SET_XCRS
-
-Capability: KVM_CAP_XCRS
-Architectures: x86
-Type: vcpu ioctl
-Parameters: struct kvm_xcrs (in)
-Returns: 0 on success, -1 on error
-
-struct kvm_xcr {
- __u32 xcr;
- __u32 reserved;
- __u64 value;
-};
-
-struct kvm_xcrs {
- __u32 nr_xcrs;
- __u32 flags;
- struct kvm_xcr xcrs[KVM_MAX_XCRS];
- __u64 padding[16];
-};
-
-This ioctl would set vcpu's xcr to the value userspace specified.
-
-4.46 KVM_GET_SUPPORTED_CPUID
-
-Capability: KVM_CAP_EXT_CPUID
-Architectures: x86
-Type: system ioctl
-Parameters: struct kvm_cpuid2 (in/out)
-Returns: 0 on success, -1 on error
-
-struct kvm_cpuid2 {
- __u32 nent;
- __u32 padding;
- struct kvm_cpuid_entry2 entries[0];
-};
-
-#define KVM_CPUID_FLAG_SIGNIFCANT_INDEX 1
-#define KVM_CPUID_FLAG_STATEFUL_FUNC 2
-#define KVM_CPUID_FLAG_STATE_READ_NEXT 4
-
-struct kvm_cpuid_entry2 {
- __u32 function;
- __u32 index;
- __u32 flags;
- __u32 eax;
- __u32 ebx;
- __u32 ecx;
- __u32 edx;
- __u32 padding[3];
-};
-
-This ioctl returns x86 cpuid features which are supported by both the hardware
-and kvm. Userspace can use the information returned by this ioctl to
-construct cpuid information (for KVM_SET_CPUID2) that is consistent with
-hardware, kernel, and userspace capabilities, and with user requirements (for
-example, the user may wish to constrain cpuid to emulate older hardware,
-or for feature consistency across a cluster).
-
-Userspace invokes KVM_GET_SUPPORTED_CPUID by passing a kvm_cpuid2 structure
-with the 'nent' field indicating the number of entries in the variable-size
-array 'entries'. If the number of entries is too low to describe the cpu
-capabilities, an error (E2BIG) is returned. If the number is too high,
-the 'nent' field is adjusted and an error (ENOMEM) is returned. If the
-number is just right, the 'nent' field is adjusted to the number of valid
-entries in the 'entries' array, which is then filled.
-
-The entries returned are the host cpuid as returned by the cpuid instruction,
-with unknown or unsupported features masked out. Some features (for example,
-x2apic), may not be present in the host cpu, but are exposed by kvm if it can
-emulate them efficiently. The fields in each entry are defined as follows:
-
- function: the eax value used to obtain the entry
- index: the ecx value used to obtain the entry (for entries that are
- affected by ecx)
- flags: an OR of zero or more of the following:
- KVM_CPUID_FLAG_SIGNIFCANT_INDEX:
- if the index field is valid
- KVM_CPUID_FLAG_STATEFUL_FUNC:
- if cpuid for this function returns different values for successive
- invocations; there will be several entries with the same function,
- all with this flag set
- KVM_CPUID_FLAG_STATE_READ_NEXT:
- for KVM_CPUID_FLAG_STATEFUL_FUNC entries, set if this entry is
- the first entry to be read by a cpu
- eax, ebx, ecx, edx: the values returned by the cpuid instruction for
- this function/index combination
-
-4.47 KVM_PPC_GET_PVINFO
-
-Capability: KVM_CAP_PPC_GET_PVINFO
-Architectures: ppc
-Type: vm ioctl
-Parameters: struct kvm_ppc_pvinfo (out)
-Returns: 0 on success, !0 on error
-
-struct kvm_ppc_pvinfo {
- __u32 flags;
- __u32 hcall[4];
- __u8 pad[108];
-};
-
-This ioctl fetches PV specific information that need to be passed to the guest
-using the device tree or other means from vm context.
-
-For now the only implemented piece of information distributed here is an array
-of 4 instructions that make up a hypercall.
-
-If any additional field gets added to this structure later on, a bit for that
-additional piece of information will be set in the flags bitmap.
-
-4.48 KVM_ASSIGN_PCI_DEVICE
-
-Capability: KVM_CAP_DEVICE_ASSIGNMENT
-Architectures: x86 ia64
-Type: vm ioctl
-Parameters: struct kvm_assigned_pci_dev (in)
-Returns: 0 on success, -1 on error
-
-Assigns a host PCI device to the VM.
-
-struct kvm_assigned_pci_dev {
- __u32 assigned_dev_id;
- __u32 busnr;
- __u32 devfn;
- __u32 flags;
- __u32 segnr;
- union {
- __u32 reserved[11];
- };
-};
-
-The PCI device is specified by the triple segnr, busnr, and devfn.
-Identification in succeeding service requests is done via assigned_dev_id. The
-following flags are specified:
-
-/* Depends on KVM_CAP_IOMMU */
-#define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0)
-
-4.49 KVM_DEASSIGN_PCI_DEVICE
-
-Capability: KVM_CAP_DEVICE_DEASSIGNMENT
-Architectures: x86 ia64
-Type: vm ioctl
-Parameters: struct kvm_assigned_pci_dev (in)
-Returns: 0 on success, -1 on error
-
-Ends PCI device assignment, releasing all associated resources.
-
-See KVM_CAP_DEVICE_ASSIGNMENT for the data structure. Only assigned_dev_id is
-used in kvm_assigned_pci_dev to identify the device.
-
-4.50 KVM_ASSIGN_DEV_IRQ
-
-Capability: KVM_CAP_ASSIGN_DEV_IRQ
-Architectures: x86 ia64
-Type: vm ioctl
-Parameters: struct kvm_assigned_irq (in)
-Returns: 0 on success, -1 on error
-
-Assigns an IRQ to a passed-through device.
-
-struct kvm_assigned_irq {
- __u32 assigned_dev_id;
- __u32 host_irq;
- __u32 guest_irq;
- __u32 flags;
- union {
- struct {
- __u32 addr_lo;
- __u32 addr_hi;
- __u32 data;
- } guest_msi;
- __u32 reserved[12];
- };
-};
-
-The following flags are defined:
-
-#define KVM_DEV_IRQ_HOST_INTX (1 << 0)
-#define KVM_DEV_IRQ_HOST_MSI (1 << 1)
-#define KVM_DEV_IRQ_HOST_MSIX (1 << 2)
-
-#define KVM_DEV_IRQ_GUEST_INTX (1 << 8)
-#define KVM_DEV_IRQ_GUEST_MSI (1 << 9)
-#define KVM_DEV_IRQ_GUEST_MSIX (1 << 10)
-
-It is not valid to specify multiple types per host or guest IRQ. However, the
-IRQ type of host and guest can differ or can even be null.
-
-4.51 KVM_DEASSIGN_DEV_IRQ
-
-Capability: KVM_CAP_ASSIGN_DEV_IRQ
-Architectures: x86 ia64
-Type: vm ioctl
-Parameters: struct kvm_assigned_irq (in)
-Returns: 0 on success, -1 on error
-
-Ends an IRQ assignment to a passed-through device.
-
-See KVM_ASSIGN_DEV_IRQ for the data structure. The target device is specified
-by assigned_dev_id, flags must correspond to the IRQ type specified on
-KVM_ASSIGN_DEV_IRQ. Partial deassignment of host or guest IRQ is allowed.
-
-4.52 KVM_SET_GSI_ROUTING
-
-Capability: KVM_CAP_IRQ_ROUTING
-Architectures: x86 ia64
-Type: vm ioctl
-Parameters: struct kvm_irq_routing (in)
-Returns: 0 on success, -1 on error
-
-Sets the GSI routing table entries, overwriting any previously set entries.
-
-struct kvm_irq_routing {
- __u32 nr;
- __u32 flags;
- struct kvm_irq_routing_entry entries[0];
-};
-
-No flags are specified so far, the corresponding field must be set to zero.
-
-struct kvm_irq_routing_entry {
- __u32 gsi;
- __u32 type;
- __u32 flags;
- __u32 pad;
- union {
- struct kvm_irq_routing_irqchip irqchip;
- struct kvm_irq_routing_msi msi;
- __u32 pad[8];
- } u;
-};
-
-/* gsi routing entry types */
-#define KVM_IRQ_ROUTING_IRQCHIP 1
-#define KVM_IRQ_ROUTING_MSI 2
-
-No flags are specified so far, the corresponding field must be set to zero.
-
-struct kvm_irq_routing_irqchip {
- __u32 irqchip;
- __u32 pin;
-};
-
-struct kvm_irq_routing_msi {
- __u32 address_lo;
- __u32 address_hi;
- __u32 data;
- __u32 pad;
-};
-
-4.53 KVM_ASSIGN_SET_MSIX_NR
-
-Capability: KVM_CAP_DEVICE_MSIX
-Architectures: x86 ia64
-Type: vm ioctl
-Parameters: struct kvm_assigned_msix_nr (in)
-Returns: 0 on success, -1 on error
-
-Set the number of MSI-X interrupts for an assigned device. This service can
-only be called once in the lifetime of an assigned device.
-
-struct kvm_assigned_msix_nr {
- __u32 assigned_dev_id;
- __u16 entry_nr;
- __u16 padding;
-};
-
-#define KVM_MAX_MSIX_PER_DEV 256
-
-4.54 KVM_ASSIGN_SET_MSIX_ENTRY
-
-Capability: KVM_CAP_DEVICE_MSIX
-Architectures: x86 ia64
-Type: vm ioctl
-Parameters: struct kvm_assigned_msix_entry (in)
-Returns: 0 on success, -1 on error
-
-Specifies the routing of an MSI-X assigned device interrupt to a GSI. Setting
-the GSI vector to zero means disabling the interrupt.
-
-struct kvm_assigned_msix_entry {
- __u32 assigned_dev_id;
- __u32 gsi;
- __u16 entry; /* The index of entry in the MSI-X table */
- __u16 padding[3];
-};
-
-5. The kvm_run structure
-
-Application code obtains a pointer to the kvm_run structure by
-mmap()ing a vcpu fd. From that point, application code can control
-execution by changing fields in kvm_run prior to calling the KVM_RUN
-ioctl, and obtain information about the reason KVM_RUN returned by
-looking up structure members.
-
-struct kvm_run {
- /* in */
- __u8 request_interrupt_window;
-
-Request that KVM_RUN return when it becomes possible to inject external
-interrupts into the guest. Useful in conjunction with KVM_INTERRUPT.
-
- __u8 padding1[7];
-
- /* out */
- __u32 exit_reason;
-
-When KVM_RUN has returned successfully (return value 0), this informs
-application code why KVM_RUN has returned. Allowable values for this
-field are detailed below.
-
- __u8 ready_for_interrupt_injection;
-
-If request_interrupt_window has been specified, this field indicates
-an interrupt can be injected now with KVM_INTERRUPT.
-
- __u8 if_flag;
-
-The value of the current interrupt flag. Only valid if in-kernel
-local APIC is not used.
-
- __u8 padding2[2];
-
- /* in (pre_kvm_run), out (post_kvm_run) */
- __u64 cr8;
-
-The value of the cr8 register. Only valid if in-kernel local APIC is
-not used. Both input and output.
-
- __u64 apic_base;
-
-The value of the APIC BASE msr. Only valid if in-kernel local
-APIC is not used. Both input and output.
-
- union {
- /* KVM_EXIT_UNKNOWN */
- struct {
- __u64 hardware_exit_reason;
- } hw;
-
-If exit_reason is KVM_EXIT_UNKNOWN, the vcpu has exited due to unknown
-reasons. Further architecture-specific information is available in
-hardware_exit_reason.
-
- /* KVM_EXIT_FAIL_ENTRY */
- struct {
- __u64 hardware_entry_failure_reason;
- } fail_entry;
-
-If exit_reason is KVM_EXIT_FAIL_ENTRY, the vcpu could not be run due
-to unknown reasons. Further architecture-specific information is
-available in hardware_entry_failure_reason.
-
- /* KVM_EXIT_EXCEPTION */
- struct {
- __u32 exception;
- __u32 error_code;
- } ex;
-
-Unused.
-
- /* KVM_EXIT_IO */
- struct {
-#define KVM_EXIT_IO_IN 0
-#define KVM_EXIT_IO_OUT 1
- __u8 direction;
- __u8 size; /* bytes */
- __u16 port;
- __u32 count;
- __u64 data_offset; /* relative to kvm_run start */
- } io;
-
-If exit_reason is KVM_EXIT_IO, then the vcpu has
-executed a port I/O instruction which could not be satisfied by kvm.
-data_offset describes where the data is located (KVM_EXIT_IO_OUT) or
-where kvm expects application code to place the data for the next
-KVM_RUN invocation (KVM_EXIT_IO_IN). Data format is a packed array.
-
- struct {
- struct kvm_debug_exit_arch arch;
- } debug;
-
-Unused.
-
- /* KVM_EXIT_MMIO */
- struct {
- __u64 phys_addr;
- __u8 data[8];
- __u32 len;
- __u8 is_write;
- } mmio;
-
-If exit_reason is KVM_EXIT_MMIO, then the vcpu has
-executed a memory-mapped I/O instruction which could not be satisfied
-by kvm. The 'data' member contains the written data if 'is_write' is
-true, and should be filled by application code otherwise.
-
-NOTE: For KVM_EXIT_IO, KVM_EXIT_MMIO and KVM_EXIT_OSI, the corresponding
-operations are complete (and guest state is consistent) only after userspace
-has re-entered the kernel with KVM_RUN. The kernel side will first finish
-incomplete operations and then check for pending signals. Userspace
-can re-enter the guest with an unmasked signal pending to complete
-pending operations.
-
- /* KVM_EXIT_HYPERCALL */
- struct {
- __u64 nr;
- __u64 args[6];
- __u64 ret;
- __u32 longmode;
- __u32 pad;
- } hypercall;
-
-Unused. This was once used for 'hypercall to userspace'. To implement
-such functionality, use KVM_EXIT_IO (x86) or KVM_EXIT_MMIO (all except s390).
-Note KVM_EXIT_IO is significantly faster than KVM_EXIT_MMIO.
-
- /* KVM_EXIT_TPR_ACCESS */
- struct {
- __u64 rip;
- __u32 is_write;
- __u32 pad;
- } tpr_access;
-
-To be documented (KVM_TPR_ACCESS_REPORTING).
-
- /* KVM_EXIT_S390_SIEIC */
- struct {
- __u8 icptcode;
- __u64 mask; /* psw upper half */
- __u64 addr; /* psw lower half */
- __u16 ipa;
- __u32 ipb;
- } s390_sieic;
-
-s390 specific.
-
- /* KVM_EXIT_S390_RESET */
-#define KVM_S390_RESET_POR 1
-#define KVM_S390_RESET_CLEAR 2
-#define KVM_S390_RESET_SUBSYSTEM 4
-#define KVM_S390_RESET_CPU_INIT 8
-#define KVM_S390_RESET_IPL 16
- __u64 s390_reset_flags;
-
-s390 specific.
-
- /* KVM_EXIT_DCR */
- struct {
- __u32 dcrn;
- __u32 data;
- __u8 is_write;
- } dcr;
-
-powerpc specific.
-
- /* KVM_EXIT_OSI */
- struct {
- __u64 gprs[32];
- } osi;
-
-MOL uses a special hypercall interface it calls 'OSI'. To enable it, we catch
-hypercalls and exit with this exit struct that contains all the guest gprs.
-
-If exit_reason is KVM_EXIT_OSI, then the vcpu has triggered such a hypercall.
-Userspace can now handle the hypercall and when it's done modify the gprs as
-necessary. Upon guest entry all guest GPRs will then be replaced by the values
-in this struct.
-
- /* Fix the size of the union. */
- char padding[256];
- };
-};
+++ /dev/null
-KVM CPUID bits
-Glauber Costa <glommer@redhat.com>, Red Hat Inc, 2010
-=====================================================
-
-A guest running on a kvm host, can check some of its features using
-cpuid. This is not always guaranteed to work, since userspace can
-mask-out some, or even all KVM-related cpuid features before launching
-a guest.
-
-KVM cpuid functions are:
-
-function: KVM_CPUID_SIGNATURE (0x40000000)
-returns : eax = 0,
- ebx = 0x4b4d564b,
- ecx = 0x564b4d56,
- edx = 0x4d.
-Note that this value in ebx, ecx and edx corresponds to the string "KVMKVMKVM".
-This function queries the presence of KVM cpuid leafs.
-
-
-function: define KVM_CPUID_FEATURES (0x40000001)
-returns : ebx, ecx, edx = 0
- eax = and OR'ed group of (1 << flag), where each flags is:
-
-
-flag || value || meaning
-=============================================================================
-KVM_FEATURE_CLOCKSOURCE || 0 || kvmclock available at msrs
- || || 0x11 and 0x12.
-------------------------------------------------------------------------------
-KVM_FEATURE_NOP_IO_DELAY || 1 || not necessary to perform delays
- || || on PIO operations.
-------------------------------------------------------------------------------
-KVM_FEATURE_MMU_OP || 2 || deprecated.
-------------------------------------------------------------------------------
-KVM_FEATURE_CLOCKSOURCE2 || 3 || kvmclock available at msrs
- || || 0x4b564d00 and 0x4b564d01
-------------------------------------------------------------------------------
-KVM_FEATURE_ASYNC_PF || 4 || async pf can be enabled by
- || || writing to msr 0x4b564d02
-------------------------------------------------------------------------------
-KVM_FEATURE_CLOCKSOURCE_STABLE_BIT || 24 || host will warn if no guest-side
- || || per-cpu warps are expected in
- || || kvmclock.
-------------------------------------------------------------------------------
+++ /dev/null
-KVM Lock Overview
-=================
-
-1. Acquisition Orders
----------------------
-
-(to be written)
-
-2. Reference
-------------
-
-Name: kvm_lock
-Type: raw_spinlock
-Arch: any
-Protects: - vm_list
- - hardware virtualization enable/disable
-Comment: 'raw' because hardware enabling/disabling must be atomic /wrt
- migration.
-
-Name: kvm_arch::tsc_write_lock
-Type: raw_spinlock
-Arch: x86
-Protects: - kvm_arch::{last_tsc_write,last_tsc_nsec,last_tsc_offset}
- - tsc offset in vmcb
-Comment: 'raw' because updating the tsc offsets must not be preempted.
+++ /dev/null
-The x86 kvm shadow mmu
-======================
-
-The mmu (in arch/x86/kvm, files mmu.[ch] and paging_tmpl.h) is responsible
-for presenting a standard x86 mmu to the guest, while translating guest
-physical addresses to host physical addresses.
-
-The mmu code attempts to satisfy the following requirements:
-
-- correctness: the guest should not be able to determine that it is running
- on an emulated mmu except for timing (we attempt to comply
- with the specification, not emulate the characteristics of
- a particular implementation such as tlb size)
-- security: the guest must not be able to touch host memory not assigned
- to it
-- performance: minimize the performance penalty imposed by the mmu
-- scaling: need to scale to large memory and large vcpu guests
-- hardware: support the full range of x86 virtualization hardware
-- integration: Linux memory management code must be in control of guest memory
- so that swapping, page migration, page merging, transparent
- hugepages, and similar features work without change
-- dirty tracking: report writes to guest memory to enable live migration
- and framebuffer-based displays
-- footprint: keep the amount of pinned kernel memory low (most memory
- should be shrinkable)
-- reliability: avoid multipage or GFP_ATOMIC allocations
-
-Acronyms
-========
-
-pfn host page frame number
-hpa host physical address
-hva host virtual address
-gfn guest frame number
-gpa guest physical address
-gva guest virtual address
-ngpa nested guest physical address
-ngva nested guest virtual address
-pte page table entry (used also to refer generically to paging structure
- entries)
-gpte guest pte (referring to gfns)
-spte shadow pte (referring to pfns)
-tdp two dimensional paging (vendor neutral term for NPT and EPT)
-
-Virtual and real hardware supported
-===================================
-
-The mmu supports first-generation mmu hardware, which allows an atomic switch
-of the current paging mode and cr3 during guest entry, as well as
-two-dimensional paging (AMD's NPT and Intel's EPT). The emulated hardware
-it exposes is the traditional 2/3/4 level x86 mmu, with support for global
-pages, pae, pse, pse36, cr0.wp, and 1GB pages. Work is in progress to support
-exposing NPT capable hardware on NPT capable hosts.
-
-Translation
-===========
-
-The primary job of the mmu is to program the processor's mmu to translate
-addresses for the guest. Different translations are required at different
-times:
-
-- when guest paging is disabled, we translate guest physical addresses to
- host physical addresses (gpa->hpa)
-- when guest paging is enabled, we translate guest virtual addresses, to
- guest physical addresses, to host physical addresses (gva->gpa->hpa)
-- when the guest launches a guest of its own, we translate nested guest
- virtual addresses, to nested guest physical addresses, to guest physical
- addresses, to host physical addresses (ngva->ngpa->gpa->hpa)
-
-The primary challenge is to encode between 1 and 3 translations into hardware
-that support only 1 (traditional) and 2 (tdp) translations. When the
-number of required translations matches the hardware, the mmu operates in
-direct mode; otherwise it operates in shadow mode (see below).
-
-Memory
-======
-
-Guest memory (gpa) is part of the user address space of the process that is
-using kvm. Userspace defines the translation between guest addresses and user
-addresses (gpa->hva); note that two gpas may alias to the same hva, but not
-vice versa.
-
-These hvas may be backed using any method available to the host: anonymous
-memory, file backed memory, and device memory. Memory might be paged by the
-host at any time.
-
-Events
-======
-
-The mmu is driven by events, some from the guest, some from the host.
-
-Guest generated events:
-- writes to control registers (especially cr3)
-- invlpg/invlpga instruction execution
-- access to missing or protected translations
-
-Host generated events:
-- changes in the gpa->hpa translation (either through gpa->hva changes or
- through hva->hpa changes)
-- memory pressure (the shrinker)
-
-Shadow pages
-============
-
-The principal data structure is the shadow page, 'struct kvm_mmu_page'. A
-shadow page contains 512 sptes, which can be either leaf or nonleaf sptes. A
-shadow page may contain a mix of leaf and nonleaf sptes.
-
-A nonleaf spte allows the hardware mmu to reach the leaf pages and
-is not related to a translation directly. It points to other shadow pages.
-
-A leaf spte corresponds to either one or two translations encoded into
-one paging structure entry. These are always the lowest level of the
-translation stack, with optional higher level translations left to NPT/EPT.
-Leaf ptes point at guest pages.
-
-The following table shows translations encoded by leaf ptes, with higher-level
-translations in parentheses:
-
- Non-nested guests:
- nonpaging: gpa->hpa
- paging: gva->gpa->hpa
- paging, tdp: (gva->)gpa->hpa
- Nested guests:
- non-tdp: ngva->gpa->hpa (*)
- tdp: (ngva->)ngpa->gpa->hpa
-
-(*) the guest hypervisor will encode the ngva->gpa translation into its page
- tables if npt is not present
-
-Shadow pages contain the following information:
- role.level:
- The level in the shadow paging hierarchy that this shadow page belongs to.
- 1=4k sptes, 2=2M sptes, 3=1G sptes, etc.
- role.direct:
- If set, leaf sptes reachable from this page are for a linear range.
- Examples include real mode translation, large guest pages backed by small
- host pages, and gpa->hpa translations when NPT or EPT is active.
- The linear range starts at (gfn << PAGE_SHIFT) and its size is determined
- by role.level (2MB for first level, 1GB for second level, 0.5TB for third
- level, 256TB for fourth level)
- If clear, this page corresponds to a guest page table denoted by the gfn
- field.
- role.quadrant:
- When role.cr4_pae=0, the guest uses 32-bit gptes while the host uses 64-bit
- sptes. That means a guest page table contains more ptes than the host,
- so multiple shadow pages are needed to shadow one guest page.
- For first-level shadow pages, role.quadrant can be 0 or 1 and denotes the
- first or second 512-gpte block in the guest page table. For second-level
- page tables, each 32-bit gpte is converted to two 64-bit sptes
- (since each first-level guest page is shadowed by two first-level
- shadow pages) so role.quadrant takes values in the range 0..3. Each
- quadrant maps 1GB virtual address space.
- role.access:
- Inherited guest access permissions in the form uwx. Note execute
- permission is positive, not negative.
- role.invalid:
- The page is invalid and should not be used. It is a root page that is
- currently pinned (by a cpu hardware register pointing to it); once it is
- unpinned it will be destroyed.
- role.cr4_pae:
- Contains the value of cr4.pae for which the page is valid (e.g. whether
- 32-bit or 64-bit gptes are in use).
- role.nxe:
- Contains the value of efer.nxe for which the page is valid.
- role.cr0_wp:
- Contains the value of cr0.wp for which the page is valid.
- gfn:
- Either the guest page table containing the translations shadowed by this
- page, or the base page frame for linear translations. See role.direct.
- spt:
- A pageful of 64-bit sptes containing the translations for this page.
- Accessed by both kvm and hardware.
- The page pointed to by spt will have its page->private pointing back
- at the shadow page structure.
- sptes in spt point either at guest pages, or at lower-level shadow pages.
- Specifically, if sp1 and sp2 are shadow pages, then sp1->spt[n] may point
- at __pa(sp2->spt). sp2 will point back at sp1 through parent_pte.
- The spt array forms a DAG structure with the shadow page as a node, and
- guest pages as leaves.
- gfns:
- An array of 512 guest frame numbers, one for each present pte. Used to
- perform a reverse map from a pte to a gfn. When role.direct is set, any
- element of this array can be calculated from the gfn field when used, in
- this case, the array of gfns is not allocated. See role.direct and gfn.
- slot_bitmap:
- A bitmap containing one bit per memory slot. If the page contains a pte
- mapping a page from memory slot n, then bit n of slot_bitmap will be set
- (if a page is aliased among several slots, then it is not guaranteed that
- all slots will be marked).
- Used during dirty logging to avoid scanning a shadow page if none if its
- pages need tracking.
- root_count:
- A counter keeping track of how many hardware registers (guest cr3 or
- pdptrs) are now pointing at the page. While this counter is nonzero, the
- page cannot be destroyed. See role.invalid.
- multimapped:
- Whether there exist multiple sptes pointing at this page.
- parent_pte/parent_ptes:
- If multimapped is zero, parent_pte points at the single spte that points at
- this page's spt. Otherwise, parent_ptes points at a data structure
- with a list of parent_ptes.
- unsync:
- If true, then the translations in this page may not match the guest's
- translation. This is equivalent to the state of the tlb when a pte is
- changed but before the tlb entry is flushed. Accordingly, unsync ptes
- are synchronized when the guest executes invlpg or flushes its tlb by
- other means. Valid for leaf pages.
- unsync_children:
- How many sptes in the page point at pages that are unsync (or have
- unsynchronized children).
- unsync_child_bitmap:
- A bitmap indicating which sptes in spt point (directly or indirectly) at
- pages that may be unsynchronized. Used to quickly locate all unsychronized
- pages reachable from a given page.
-
-Reverse map
-===========
-
-The mmu maintains a reverse mapping whereby all ptes mapping a page can be
-reached given its gfn. This is used, for example, when swapping out a page.
-
-Synchronized and unsynchronized pages
-=====================================
-
-The guest uses two events to synchronize its tlb and page tables: tlb flushes
-and page invalidations (invlpg).
-
-A tlb flush means that we need to synchronize all sptes reachable from the
-guest's cr3. This is expensive, so we keep all guest page tables write
-protected, and synchronize sptes to gptes when a gpte is written.
-
-A special case is when a guest page table is reachable from the current
-guest cr3. In this case, the guest is obliged to issue an invlpg instruction
-before using the translation. We take advantage of that by removing write
-protection from the guest page, and allowing the guest to modify it freely.
-We synchronize modified gptes when the guest invokes invlpg. This reduces
-the amount of emulation we have to do when the guest modifies multiple gptes,
-or when the a guest page is no longer used as a page table and is used for
-random guest data.
-
-As a side effect we have to resynchronize all reachable unsynchronized shadow
-pages on a tlb flush.
-
-
-Reaction to events
-==================
-
-- guest page fault (or npt page fault, or ept violation)
-
-This is the most complicated event. The cause of a page fault can be:
-
- - a true guest fault (the guest translation won't allow the access) (*)
- - access to a missing translation
- - access to a protected translation
- - when logging dirty pages, memory is write protected
- - synchronized shadow pages are write protected (*)
- - access to untranslatable memory (mmio)
-
- (*) not applicable in direct mode
-
-Handling a page fault is performed as follows:
-
- - if needed, walk the guest page tables to determine the guest translation
- (gva->gpa or ngpa->gpa)
- - if permissions are insufficient, reflect the fault back to the guest
- - determine the host page
- - if this is an mmio request, there is no host page; call the emulator
- to emulate the instruction instead
- - walk the shadow page table to find the spte for the translation,
- instantiating missing intermediate page tables as necessary
- - try to unsynchronize the page
- - if successful, we can let the guest continue and modify the gpte
- - emulate the instruction
- - if failed, unshadow the page and let the guest continue
- - update any translations that were modified by the instruction
-
-invlpg handling:
-
- - walk the shadow page hierarchy and drop affected translations
- - try to reinstantiate the indicated translation in the hope that the
- guest will use it in the near future
-
-Guest control register updates:
-
-- mov to cr3
- - look up new shadow roots
- - synchronize newly reachable shadow pages
-
-- mov to cr0/cr4/efer
- - set up mmu context for new paging mode
- - look up new shadow roots
- - synchronize newly reachable shadow pages
-
-Host translation updates:
-
- - mmu notifier called with updated hva
- - look up affected sptes through reverse map
- - drop (or update) translations
-
-Emulating cr0.wp
-================
-
-If tdp is not enabled, the host must keep cr0.wp=1 so page write protection
-works for the guest kernel, not guest guest userspace. When the guest
-cr0.wp=1, this does not present a problem. However when the guest cr0.wp=0,
-we cannot map the permissions for gpte.u=1, gpte.w=0 to any spte (the
-semantics require allowing any guest kernel access plus user read access).
-
-We handle this by mapping the permissions to two possible sptes, depending
-on fault type:
-
-- kernel write fault: spte.u=0, spte.w=1 (allows full kernel access,
- disallows user access)
-- read fault: spte.u=1, spte.w=0 (allows full read access, disallows kernel
- write access)
-
-(user write faults generate a #PF)
-
-Large pages
-===========
-
-The mmu supports all combinations of large and small guest and host pages.
-Supported page sizes include 4k, 2M, 4M, and 1G. 4M pages are treated as
-two separate 2M pages, on both guest and host, since the mmu always uses PAE
-paging.
-
-To instantiate a large spte, four constraints must be satisfied:
-
-- the spte must point to a large host page
-- the guest pte must be a large pte of at least equivalent size (if tdp is
- enabled, there is no guest pte and this condition is satisified)
-- if the spte will be writeable, the large page frame may not overlap any
- write-protected pages
-- the guest page must be wholly contained by a single memory slot
-
-To check the last two conditions, the mmu maintains a ->write_count set of
-arrays for each memory slot and large page size. Every write protected page
-causes its write_count to be incremented, thus preventing instantiation of
-a large spte. The frames at the end of an unaligned memory slot have
-artificically inflated ->write_counts so they can never be instantiated.
-
-Further reading
-===============
-
-- NPT presentation from KVM Forum 2008
- http://www.linux-kvm.org/wiki/images/c/c8/KvmForum2008%24kdf2008_21.pdf
-
+++ /dev/null
-KVM-specific MSRs.
-Glauber Costa <glommer@redhat.com>, Red Hat Inc, 2010
-=====================================================
-
-KVM makes use of some custom MSRs to service some requests.
-
-Custom MSRs have a range reserved for them, that goes from
-0x4b564d00 to 0x4b564dff. There are MSRs outside this area,
-but they are deprecated and their use is discouraged.
-
-Custom MSR list
---------
-
-The current supported Custom MSR list is:
-
-MSR_KVM_WALL_CLOCK_NEW: 0x4b564d00
-
- data: 4-byte alignment physical address of a memory area which must be
- in guest RAM. This memory is expected to hold a copy of the following
- structure:
-
- struct pvclock_wall_clock {
- u32 version;
- u32 sec;
- u32 nsec;
- } __attribute__((__packed__));
-
- whose data will be filled in by the hypervisor. The hypervisor is only
- guaranteed to update this data at the moment of MSR write.
- Users that want to reliably query this information more than once have
- to write more than once to this MSR. Fields have the following meanings:
-
- version: guest has to check version before and after grabbing
- time information and check that they are both equal and even.
- An odd version indicates an in-progress update.
-
- sec: number of seconds for wallclock.
-
- nsec: number of nanoseconds for wallclock.
-
- Note that although MSRs are per-CPU entities, the effect of this
- particular MSR is global.
-
- Availability of this MSR must be checked via bit 3 in 0x4000001 cpuid
- leaf prior to usage.
-
-MSR_KVM_SYSTEM_TIME_NEW: 0x4b564d01
-
- data: 4-byte aligned physical address of a memory area which must be in
- guest RAM, plus an enable bit in bit 0. This memory is expected to hold
- a copy of the following structure:
-
- struct pvclock_vcpu_time_info {
- u32 version;
- u32 pad0;
- u64 tsc_timestamp;
- u64 system_time;
- u32 tsc_to_system_mul;
- s8 tsc_shift;
- u8 flags;
- u8 pad[2];
- } __attribute__((__packed__)); /* 32 bytes */
-
- whose data will be filled in by the hypervisor periodically. Only one
- write, or registration, is needed for each VCPU. The interval between
- updates of this structure is arbitrary and implementation-dependent.
- The hypervisor may update this structure at any time it sees fit until
- anything with bit0 == 0 is written to it.
-
- Fields have the following meanings:
-
- version: guest has to check version before and after grabbing
- time information and check that they are both equal and even.
- An odd version indicates an in-progress update.
-
- tsc_timestamp: the tsc value at the current VCPU at the time
- of the update of this structure. Guests can subtract this value
- from current tsc to derive a notion of elapsed time since the
- structure update.
-
- system_time: a host notion of monotonic time, including sleep
- time at the time this structure was last updated. Unit is
- nanoseconds.
-
- tsc_to_system_mul: a function of the tsc frequency. One has
- to multiply any tsc-related quantity by this value to get
- a value in nanoseconds, besides dividing by 2^tsc_shift
-
- tsc_shift: cycle to nanosecond divider, as a power of two, to
- allow for shift rights. One has to shift right any tsc-related
- quantity by this value to get a value in nanoseconds, besides
- multiplying by tsc_to_system_mul.
-
- With this information, guests can derive per-CPU time by
- doing:
-
- time = (current_tsc - tsc_timestamp)
- time = (time * tsc_to_system_mul) >> tsc_shift
- time = time + system_time
-
- flags: bits in this field indicate extended capabilities
- coordinated between the guest and the hypervisor. Availability
- of specific flags has to be checked in 0x40000001 cpuid leaf.
- Current flags are:
-
- flag bit | cpuid bit | meaning
- -------------------------------------------------------------
- | | time measures taken across
- 0 | 24 | multiple cpus are guaranteed to
- | | be monotonic
- -------------------------------------------------------------
-
- Availability of this MSR must be checked via bit 3 in 0x4000001 cpuid
- leaf prior to usage.
-
-
-MSR_KVM_WALL_CLOCK: 0x11
-
- data and functioning: same as MSR_KVM_WALL_CLOCK_NEW. Use that instead.
-
- This MSR falls outside the reserved KVM range and may be removed in the
- future. Its usage is deprecated.
-
- Availability of this MSR must be checked via bit 0 in 0x4000001 cpuid
- leaf prior to usage.
-
-MSR_KVM_SYSTEM_TIME: 0x12
-
- data and functioning: same as MSR_KVM_SYSTEM_TIME_NEW. Use that instead.
-
- This MSR falls outside the reserved KVM range and may be removed in the
- future. Its usage is deprecated.
-
- Availability of this MSR must be checked via bit 0 in 0x4000001 cpuid
- leaf prior to usage.
-
- The suggested algorithm for detecting kvmclock presence is then:
-
- if (!kvm_para_available()) /* refer to cpuid.txt */
- return NON_PRESENT;
-
- flags = cpuid_eax(0x40000001);
- if (flags & 3) {
- msr_kvm_system_time = MSR_KVM_SYSTEM_TIME_NEW;
- msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK_NEW;
- return PRESENT;
- } else if (flags & 0) {
- msr_kvm_system_time = MSR_KVM_SYSTEM_TIME;
- msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK;
- return PRESENT;
- } else
- return NON_PRESENT;
-
-MSR_KVM_ASYNC_PF_EN: 0x4b564d02
- data: Bits 63-6 hold 64-byte aligned physical address of a
- 64 byte memory area which must be in guest RAM and must be
- zeroed. Bits 5-2 are reserved and should be zero. Bit 0 is 1
- when asynchronous page faults are enabled on the vcpu 0 when
- disabled. Bit 2 is 1 if asynchronous page faults can be injected
- when vcpu is in cpl == 0.
-
- First 4 byte of 64 byte memory location will be written to by
- the hypervisor at the time of asynchronous page fault (APF)
- injection to indicate type of asynchronous page fault. Value
- of 1 means that the page referred to by the page fault is not
- present. Value 2 means that the page is now available. Disabling
- interrupt inhibits APFs. Guest must not enable interrupt
- before the reason is read, or it may be overwritten by another
- APF. Since APF uses the same exception vector as regular page
- fault guest must reset the reason to 0 before it does
- something that can generate normal page fault. If during page
- fault APF reason is 0 it means that this is regular page
- fault.
-
- During delivery of type 1 APF cr2 contains a token that will
- be used to notify a guest when missing page becomes
- available. When page becomes available type 2 APF is sent with
- cr2 set to the token associated with the page. There is special
- kind of token 0xffffffff which tells vcpu that it should wake
- up all processes waiting for APFs and no individual type 2 APFs
- will be sent.
-
- If APF is disabled while there are outstanding APFs, they will
- not be delivered.
-
- Currently type 2 APF will be always delivered on the same vcpu as
- type 1 was, but guest should not rely on that.
+++ /dev/null
-The PPC KVM paravirtual interface
-=================================
-
-The basic execution principle by which KVM on PowerPC works is to run all kernel
-space code in PR=1 which is user space. This way we trap all privileged
-instructions and can emulate them accordingly.
-
-Unfortunately that is also the downfall. There are quite some privileged
-instructions that needlessly return us to the hypervisor even though they
-could be handled differently.
-
-This is what the PPC PV interface helps with. It takes privileged instructions
-and transforms them into unprivileged ones with some help from the hypervisor.
-This cuts down virtualization costs by about 50% on some of my benchmarks.
-
-The code for that interface can be found in arch/powerpc/kernel/kvm*
-
-Querying for existence
-======================
-
-To find out if we're running on KVM or not, we leverage the device tree. When
-Linux is running on KVM, a node /hypervisor exists. That node contains a
-compatible property with the value "linux,kvm".
-
-Once you determined you're running under a PV capable KVM, you can now use
-hypercalls as described below.
-
-KVM hypercalls
-==============
-
-Inside the device tree's /hypervisor node there's a property called
-'hypercall-instructions'. This property contains at most 4 opcodes that make
-up the hypercall. To call a hypercall, just call these instructions.
-
-The parameters are as follows:
-
- Register IN OUT
-
- r0 - volatile
- r3 1st parameter Return code
- r4 2nd parameter 1st output value
- r5 3rd parameter 2nd output value
- r6 4th parameter 3rd output value
- r7 5th parameter 4th output value
- r8 6th parameter 5th output value
- r9 7th parameter 6th output value
- r10 8th parameter 7th output value
- r11 hypercall number 8th output value
- r12 - volatile
-
-Hypercall definitions are shared in generic code, so the same hypercall numbers
-apply for x86 and powerpc alike with the exception that each KVM hypercall
-also needs to be ORed with the KVM vendor code which is (42 << 16).
-
-Return codes can be as follows:
-
- Code Meaning
-
- 0 Success
- 12 Hypercall not implemented
- <0 Error
-
-The magic page
-==============
-
-To enable communication between the hypervisor and guest there is a new shared
-page that contains parts of supervisor visible register state. The guest can
-map this shared page using the KVM hypercall KVM_HC_PPC_MAP_MAGIC_PAGE.
-
-With this hypercall issued the guest always gets the magic page mapped at the
-desired location in effective and physical address space. For now, we always
-map the page to -4096. This way we can access it using absolute load and store
-functions. The following instruction reads the first field of the magic page:
-
- ld rX, -4096(0)
-
-The interface is designed to be extensible should there be need later to add
-additional registers to the magic page. If you add fields to the magic page,
-also define a new hypercall feature to indicate that the host can give you more
-registers. Only if the host supports the additional features, make use of them.
-
-The magic page has the following layout as described in
-arch/powerpc/include/asm/kvm_para.h:
-
-struct kvm_vcpu_arch_shared {
- __u64 scratch1;
- __u64 scratch2;
- __u64 scratch3;
- __u64 critical; /* Guest may not get interrupts if == r1 */
- __u64 sprg0;
- __u64 sprg1;
- __u64 sprg2;
- __u64 sprg3;
- __u64 srr0;
- __u64 srr1;
- __u64 dar;
- __u64 msr;
- __u32 dsisr;
- __u32 int_pending; /* Tells the guest if we have an interrupt */
-};
-
-Additions to the page must only occur at the end. Struct fields are always 32
-or 64 bit aligned, depending on them being 32 or 64 bit wide respectively.
-
-Magic page features
-===================
-
-When mapping the magic page using the KVM hypercall KVM_HC_PPC_MAP_MAGIC_PAGE,
-a second return value is passed to the guest. This second return value contains
-a bitmap of available features inside the magic page.
-
-The following enhancements to the magic page are currently available:
-
- KVM_MAGIC_FEAT_SR Maps SR registers r/w in the magic page
-
-For enhanced features in the magic page, please check for the existence of the
-feature before using them!
-
-MSR bits
-========
-
-The MSR contains bits that require hypervisor intervention and bits that do
-not require direct hypervisor intervention because they only get interpreted
-when entering the guest or don't have any impact on the hypervisor's behavior.
-
-The following bits are safe to be set inside the guest:
-
- MSR_EE
- MSR_RI
- MSR_CR
- MSR_ME
-
-If any other bit changes in the MSR, please still use mtmsr(d).
-
-Patched instructions
-====================
-
-The "ld" and "std" instructions are transormed to "lwz" and "stw" instructions
-respectively on 32 bit systems with an added offset of 4 to accommodate for big
-endianness.
-
-The following is a list of mapping the Linux kernel performs when running as
-guest. Implementing any of those mappings is optional, as the instruction traps
-also act on the shared page. So calling privileged instructions still works as
-before.
-
-From To
-==== ==
-
-mfmsr rX ld rX, magic_page->msr
-mfsprg rX, 0 ld rX, magic_page->sprg0
-mfsprg rX, 1 ld rX, magic_page->sprg1
-mfsprg rX, 2 ld rX, magic_page->sprg2
-mfsprg rX, 3 ld rX, magic_page->sprg3
-mfsrr0 rX ld rX, magic_page->srr0
-mfsrr1 rX ld rX, magic_page->srr1
-mfdar rX ld rX, magic_page->dar
-mfdsisr rX lwz rX, magic_page->dsisr
-
-mtmsr rX std rX, magic_page->msr
-mtsprg 0, rX std rX, magic_page->sprg0
-mtsprg 1, rX std rX, magic_page->sprg1
-mtsprg 2, rX std rX, magic_page->sprg2
-mtsprg 3, rX std rX, magic_page->sprg3
-mtsrr0 rX std rX, magic_page->srr0
-mtsrr1 rX std rX, magic_page->srr1
-mtdar rX std rX, magic_page->dar
-mtdsisr rX stw rX, magic_page->dsisr
-
-tlbsync nop
-
-mtmsrd rX, 0 b <special mtmsr section>
-mtmsr rX b <special mtmsr section>
-
-mtmsrd rX, 1 b <special mtmsrd section>
-
-[Book3S only]
-mtsrin rX, rY b <special mtsrin section>
-
-[BookE only]
-wrteei [0|1] b <special wrteei section>
-
-
-Some instructions require more logic to determine what's going on than a load
-or store instruction can deliver. To enable patching of those, we keep some
-RAM around where we can live translate instructions to. What happens is the
-following:
-
- 1) copy emulation code to memory
- 2) patch that code to fit the emulated instruction
- 3) patch that code to return to the original pc + 4
- 4) patch the original instruction to branch to the new code
-
-That way we can inject an arbitrary amount of code as replacement for a single
-instruction. This allows us to check for pending interrupts when setting EE=1
-for example.
+++ /dev/null
-Review checklist for kvm patches
-================================
-
-1. The patch must follow Documentation/CodingStyle and
- Documentation/SubmittingPatches.
-
-2. Patches should be against kvm.git master branch.
-
-3. If the patch introduces or modifies a new userspace API:
- - the API must be documented in Documentation/kvm/api.txt
- - the API must be discoverable using KVM_CHECK_EXTENSION
-
-4. New state must include support for save/restore.
-
-5. New features must default to off (userspace should explicitly request them).
- Performance improvements can and should default to on.
-
-6. New cpu features should be exposed via KVM_GET_SUPPORTED_CPUID2
-
-7. Emulator changes should be accompanied by unit tests for qemu-kvm.git
- kvm/test directory.
-
-8. Changes should be vendor neutral when possible. Changes to common code
- are better than duplicating changes to vendor code.
-
-9. Similarly, prefer changes to arch independent code than to arch dependent
- code.
-
-10. User/kernel interfaces and guest/host interfaces must be 64-bit clean
- (all variables and sizes naturally aligned on 64-bit; use specific types
- only - u64 rather than ulong).
-
-11. New guest visible features must either be documented in a hardware manual
- or be accompanied by documentation.
-
-12. Features must be robust against reset and kexec - for example, shared
- host/guest memory must be unshared to prevent the host from writing to
- guest memory that the guest has not reserved for this purpose.
+++ /dev/null
-
- Timekeeping Virtualization for X86-Based Architectures
-
- Zachary Amsden <zamsden@redhat.com>
- Copyright (c) 2010, Red Hat. All rights reserved.
-
-1) Overview
-2) Timing Devices
-3) TSC Hardware
-4) Virtualization Problems
-
-=========================================================================
-
-1) Overview
-
-One of the most complicated parts of the X86 platform, and specifically,
-the virtualization of this platform is the plethora of timing devices available
-and the complexity of emulating those devices. In addition, virtualization of
-time introduces a new set of challenges because it introduces a multiplexed
-division of time beyond the control of the guest CPU.
-
-First, we will describe the various timekeeping hardware available, then
-present some of the problems which arise and solutions available, giving
-specific recommendations for certain classes of KVM guests.
-
-The purpose of this document is to collect data and information relevant to
-timekeeping which may be difficult to find elsewhere, specifically,
-information relevant to KVM and hardware-based virtualization.
-
-=========================================================================
-
-2) Timing Devices
-
-First we discuss the basic hardware devices available. TSC and the related
-KVM clock are special enough to warrant a full exposition and are described in
-the following section.
-
-2.1) i8254 - PIT
-
-One of the first timer devices available is the programmable interrupt timer,
-or PIT. The PIT has a fixed frequency 1.193182 MHz base clock and three
-channels which can be programmed to deliver periodic or one-shot interrupts.
-These three channels can be configured in different modes and have individual
-counters. Channel 1 and 2 were not available for general use in the original
-IBM PC, and historically were connected to control RAM refresh and the PC
-speaker. Now the PIT is typically integrated as part of an emulated chipset
-and a separate physical PIT is not used.
-
-The PIT uses I/O ports 0x40 - 0x43. Access to the 16-bit counters is done
-using single or multiple byte access to the I/O ports. There are 6 modes
-available, but not all modes are available to all timers, as only timer 2
-has a connected gate input, required for modes 1 and 5. The gate line is
-controlled by port 61h, bit 0, as illustrated in the following diagram.
-
- -------------- ----------------
-| | | |
-| 1.1932 MHz |---------->| CLOCK OUT | ---------> IRQ 0
-| Clock | | | |
- -------------- | +->| GATE TIMER 0 |
- | ----------------
- |
- | ----------------
- | | |
- |------>| CLOCK OUT | ---------> 66.3 KHZ DRAM
- | | | (aka /dev/null)
- | +->| GATE TIMER 1 |
- | ----------------
- |
- | ----------------
- | | |
- |------>| CLOCK OUT | ---------> Port 61h, bit 5
- | | |
-Port 61h, bit 0 ---------->| GATE TIMER 2 | \_.---- ____
- ---------------- _| )--|LPF|---Speaker
- / *---- \___/
-Port 61h, bit 1 -----------------------------------/
-
-The timer modes are now described.
-
-Mode 0: Single Timeout. This is a one-shot software timeout that counts down
- when the gate is high (always true for timers 0 and 1). When the count
- reaches zero, the output goes high.
-
-Mode 1: Triggered One-shot. The output is initially set high. When the gate
- line is set high, a countdown is initiated (which does not stop if the gate is
- lowered), during which the output is set low. When the count reaches zero,
- the output goes high.
-
-Mode 2: Rate Generator. The output is initially set high. When the countdown
- reaches 1, the output goes low for one count and then returns high. The value
- is reloaded and the countdown automatically resumes. If the gate line goes
- low, the count is halted. If the output is low when the gate is lowered, the
- output automatically goes high (this only affects timer 2).
-
-Mode 3: Square Wave. This generates a high / low square wave. The count
- determines the length of the pulse, which alternates between high and low
- when zero is reached. The count only proceeds when gate is high and is
- automatically reloaded on reaching zero. The count is decremented twice at
- each clock to generate a full high / low cycle at the full periodic rate.
- If the count is even, the clock remains high for N/2 counts and low for N/2
- counts; if the clock is odd, the clock is high for (N+1)/2 counts and low
- for (N-1)/2 counts. Only even values are latched by the counter, so odd
- values are not observed when reading. This is the intended mode for timer 2,
- which generates sine-like tones by low-pass filtering the square wave output.
-
-Mode 4: Software Strobe. After programming this mode and loading the counter,
- the output remains high until the counter reaches zero. Then the output
- goes low for 1 clock cycle and returns high. The counter is not reloaded.
- Counting only occurs when gate is high.
-
-Mode 5: Hardware Strobe. After programming and loading the counter, the
- output remains high. When the gate is raised, a countdown is initiated
- (which does not stop if the gate is lowered). When the counter reaches zero,
- the output goes low for 1 clock cycle and then returns high. The counter is
- not reloaded.
-
-In addition to normal binary counting, the PIT supports BCD counting. The
-command port, 0x43 is used to set the counter and mode for each of the three
-timers.
-
-PIT commands, issued to port 0x43, using the following bit encoding:
-
-Bit 7-4: Command (See table below)
-Bit 3-1: Mode (000 = Mode 0, 101 = Mode 5, 11X = undefined)
-Bit 0 : Binary (0) / BCD (1)
-
-Command table:
-
-0000 - Latch Timer 0 count for port 0x40
- sample and hold the count to be read in port 0x40;
- additional commands ignored until counter is read;
- mode bits ignored.
-
-0001 - Set Timer 0 LSB mode for port 0x40
- set timer to read LSB only and force MSB to zero;
- mode bits set timer mode
-
-0010 - Set Timer 0 MSB mode for port 0x40
- set timer to read MSB only and force LSB to zero;
- mode bits set timer mode
-
-0011 - Set Timer 0 16-bit mode for port 0x40
- set timer to read / write LSB first, then MSB;
- mode bits set timer mode
-
-0100 - Latch Timer 1 count for port 0x41 - as described above
-0101 - Set Timer 1 LSB mode for port 0x41 - as described above
-0110 - Set Timer 1 MSB mode for port 0x41 - as described above
-0111 - Set Timer 1 16-bit mode for port 0x41 - as described above
-
-1000 - Latch Timer 2 count for port 0x42 - as described above
-1001 - Set Timer 2 LSB mode for port 0x42 - as described above
-1010 - Set Timer 2 MSB mode for port 0x42 - as described above
-1011 - Set Timer 2 16-bit mode for port 0x42 as described above
-
-1101 - General counter latch
- Latch combination of counters into corresponding ports
- Bit 3 = Counter 2
- Bit 2 = Counter 1
- Bit 1 = Counter 0
- Bit 0 = Unused
-
-1110 - Latch timer status
- Latch combination of counter mode into corresponding ports
- Bit 3 = Counter 2
- Bit 2 = Counter 1
- Bit 1 = Counter 0
-
- The output of ports 0x40-0x42 following this command will be:
-
- Bit 7 = Output pin
- Bit 6 = Count loaded (0 if timer has expired)
- Bit 5-4 = Read / Write mode
- 01 = MSB only
- 10 = LSB only
- 11 = LSB / MSB (16-bit)
- Bit 3-1 = Mode
- Bit 0 = Binary (0) / BCD mode (1)
-
-2.2) RTC
-
-The second device which was available in the original PC was the MC146818 real
-time clock. The original device is now obsolete, and usually emulated by the
-system chipset, sometimes by an HPET and some frankenstein IRQ routing.
-
-The RTC is accessed through CMOS variables, which uses an index register to
-control which bytes are read. Since there is only one index register, read
-of the CMOS and read of the RTC require lock protection (in addition, it is
-dangerous to allow userspace utilities such as hwclock to have direct RTC
-access, as they could corrupt kernel reads and writes of CMOS memory).
-
-The RTC generates an interrupt which is usually routed to IRQ 8. The interrupt
-can function as a periodic timer, an additional once a day alarm, and can issue
-interrupts after an update of the CMOS registers by the MC146818 is complete.
-The type of interrupt is signalled in the RTC status registers.
-
-The RTC will update the current time fields by battery power even while the
-system is off. The current time fields should not be read while an update is
-in progress, as indicated in the status register.
-
-The clock uses a 32.768kHz crystal, so bits 6-4 of register A should be
-programmed to a 32kHz divider if the RTC is to count seconds.
-
-This is the RAM map originally used for the RTC/CMOS:
-
-Location Size Description
-------------------------------------------
-00h byte Current second (BCD)
-01h byte Seconds alarm (BCD)
-02h byte Current minute (BCD)
-03h byte Minutes alarm (BCD)
-04h byte Current hour (BCD)
-05h byte Hours alarm (BCD)
-06h byte Current day of week (BCD)
-07h byte Current day of month (BCD)
-08h byte Current month (BCD)
-09h byte Current year (BCD)
-0Ah byte Register A
- bit 7 = Update in progress
- bit 6-4 = Divider for clock
- 000 = 4.194 MHz
- 001 = 1.049 MHz
- 010 = 32 kHz
- 10X = test modes
- 110 = reset / disable
- 111 = reset / disable
- bit 3-0 = Rate selection for periodic interrupt
- 000 = periodic timer disabled
- 001 = 3.90625 uS
- 010 = 7.8125 uS
- 011 = .122070 mS
- 100 = .244141 mS
- ...
- 1101 = 125 mS
- 1110 = 250 mS
- 1111 = 500 mS
-0Bh byte Register B
- bit 7 = Run (0) / Halt (1)
- bit 6 = Periodic interrupt enable
- bit 5 = Alarm interrupt enable
- bit 4 = Update-ended interrupt enable
- bit 3 = Square wave interrupt enable
- bit 2 = BCD calendar (0) / Binary (1)
- bit 1 = 12-hour mode (0) / 24-hour mode (1)
- bit 0 = 0 (DST off) / 1 (DST enabled)
-OCh byte Register C (read only)
- bit 7 = interrupt request flag (IRQF)
- bit 6 = periodic interrupt flag (PF)
- bit 5 = alarm interrupt flag (AF)
- bit 4 = update interrupt flag (UF)
- bit 3-0 = reserved
-ODh byte Register D (read only)
- bit 7 = RTC has power
- bit 6-0 = reserved
-32h byte Current century BCD (*)
- (*) location vendor specific and now determined from ACPI global tables
-
-2.3) APIC
-
-On Pentium and later processors, an on-board timer is available to each CPU
-as part of the Advanced Programmable Interrupt Controller. The APIC is
-accessed through memory-mapped registers and provides interrupt service to each
-CPU, used for IPIs and local timer interrupts.
-
-Although in theory the APIC is a safe and stable source for local interrupts,
-in practice, many bugs and glitches have occurred due to the special nature of
-the APIC CPU-local memory-mapped hardware. Beware that CPU errata may affect
-the use of the APIC and that workarounds may be required. In addition, some of
-these workarounds pose unique constraints for virtualization - requiring either
-extra overhead incurred from extra reads of memory-mapped I/O or additional
-functionality that may be more computationally expensive to implement.
-
-Since the APIC is documented quite well in the Intel and AMD manuals, we will
-avoid repetition of the detail here. It should be pointed out that the APIC
-timer is programmed through the LVT (local vector timer) register, is capable
-of one-shot or periodic operation, and is based on the bus clock divided down
-by the programmable divider register.
-
-2.4) HPET
-
-HPET is quite complex, and was originally intended to replace the PIT / RTC
-support of the X86 PC. It remains to be seen whether that will be the case, as
-the de facto standard of PC hardware is to emulate these older devices. Some
-systems designated as legacy free may support only the HPET as a hardware timer
-device.
-
-The HPET spec is rather loose and vague, requiring at least 3 hardware timers,
-but allowing implementation freedom to support many more. It also imposes no
-fixed rate on the timer frequency, but does impose some extremal values on
-frequency, error and slew.
-
-In general, the HPET is recommended as a high precision (compared to PIT /RTC)
-time source which is independent of local variation (as there is only one HPET
-in any given system). The HPET is also memory-mapped, and its presence is
-indicated through ACPI tables by the BIOS.
-
-Detailed specification of the HPET is beyond the current scope of this
-document, as it is also very well documented elsewhere.
-
-2.5) Offboard Timers
-
-Several cards, both proprietary (watchdog boards) and commonplace (e1000) have
-timing chips built into the cards which may have registers which are accessible
-to kernel or user drivers. To the author's knowledge, using these to generate
-a clocksource for a Linux or other kernel has not yet been attempted and is in
-general frowned upon as not playing by the agreed rules of the game. Such a
-timer device would require additional support to be virtualized properly and is
-not considered important at this time as no known operating system does this.
-
-=========================================================================
-
-3) TSC Hardware
-
-The TSC or time stamp counter is relatively simple in theory; it counts
-instruction cycles issued by the processor, which can be used as a measure of
-time. In practice, due to a number of problems, it is the most complicated
-timekeeping device to use.
-
-The TSC is represented internally as a 64-bit MSR which can be read with the
-RDMSR, RDTSC, or RDTSCP (when available) instructions. In the past, hardware
-limitations made it possible to write the TSC, but generally on old hardware it
-was only possible to write the low 32-bits of the 64-bit counter, and the upper
-32-bits of the counter were cleared. Now, however, on Intel processors family
-0Fh, for models 3, 4 and 6, and family 06h, models e and f, this restriction
-has been lifted and all 64-bits are writable. On AMD systems, the ability to
-write the TSC MSR is not an architectural guarantee.
-
-The TSC is accessible from CPL-0 and conditionally, for CPL > 0 software by
-means of the CR4.TSD bit, which when enabled, disables CPL > 0 TSC access.
-
-Some vendors have implemented an additional instruction, RDTSCP, which returns
-atomically not just the TSC, but an indicator which corresponds to the
-processor number. This can be used to index into an array of TSC variables to
-determine offset information in SMP systems where TSCs are not synchronized.
-The presence of this instruction must be determined by consulting CPUID feature
-bits.
-
-Both VMX and SVM provide extension fields in the virtualization hardware which
-allows the guest visible TSC to be offset by a constant. Newer implementations
-promise to allow the TSC to additionally be scaled, but this hardware is not
-yet widely available.
-
-3.1) TSC synchronization
-
-The TSC is a CPU-local clock in most implementations. This means, on SMP
-platforms, the TSCs of different CPUs may start at different times depending
-on when the CPUs are powered on. Generally, CPUs on the same die will share
-the same clock, however, this is not always the case.
-
-The BIOS may attempt to resynchronize the TSCs during the poweron process and
-the operating system or other system software may attempt to do this as well.
-Several hardware limitations make the problem worse - if it is not possible to
-write the full 64-bits of the TSC, it may be impossible to match the TSC in
-newly arriving CPUs to that of the rest of the system, resulting in
-unsynchronized TSCs. This may be done by BIOS or system software, but in
-practice, getting a perfectly synchronized TSC will not be possible unless all
-values are read from the same clock, which generally only is possible on single
-socket systems or those with special hardware support.
-
-3.2) TSC and CPU hotplug
-
-As touched on already, CPUs which arrive later than the boot time of the system
-may not have a TSC value that is synchronized with the rest of the system.
-Either system software, BIOS, or SMM code may actually try to establish the TSC
-to a value matching the rest of the system, but a perfect match is usually not
-a guarantee. This can have the effect of bringing a system from a state where
-TSC is synchronized back to a state where TSC synchronization flaws, however
-small, may be exposed to the OS and any virtualization environment.
-
-3.3) TSC and multi-socket / NUMA
-
-Multi-socket systems, especially large multi-socket systems are likely to have
-individual clocksources rather than a single, universally distributed clock.
-Since these clocks are driven by different crystals, they will not have
-perfectly matched frequency, and temperature and electrical variations will
-cause the CPU clocks, and thus the TSCs to drift over time. Depending on the
-exact clock and bus design, the drift may or may not be fixed in absolute
-error, and may accumulate over time.
-
-In addition, very large systems may deliberately slew the clocks of individual
-cores. This technique, known as spread-spectrum clocking, reduces EMI at the
-clock frequency and harmonics of it, which may be required to pass FCC
-standards for telecommunications and computer equipment.
-
-It is recommended not to trust the TSCs to remain synchronized on NUMA or
-multiple socket systems for these reasons.
-
-3.4) TSC and C-states
-
-C-states, or idling states of the processor, especially C1E and deeper sleep
-states may be problematic for TSC as well. The TSC may stop advancing in such
-a state, resulting in a TSC which is behind that of other CPUs when execution
-is resumed. Such CPUs must be detected and flagged by the operating system
-based on CPU and chipset identifications.
-
-The TSC in such a case may be corrected by catching it up to a known external
-clocksource.
-
-3.5) TSC frequency change / P-states
-
-To make things slightly more interesting, some CPUs may change frequency. They
-may or may not run the TSC at the same rate, and because the frequency change
-may be staggered or slewed, at some points in time, the TSC rate may not be
-known other than falling within a range of values. In this case, the TSC will
-not be a stable time source, and must be calibrated against a known, stable,
-external clock to be a usable source of time.
-
-Whether the TSC runs at a constant rate or scales with the P-state is model
-dependent and must be determined by inspecting CPUID, chipset or vendor
-specific MSR fields.
-
-In addition, some vendors have known bugs where the P-state is actually
-compensated for properly during normal operation, but when the processor is
-inactive, the P-state may be raised temporarily to service cache misses from
-other processors. In such cases, the TSC on halted CPUs could advance faster
-than that of non-halted processors. AMD Turion processors are known to have
-this problem.
-
-3.6) TSC and STPCLK / T-states
-
-External signals given to the processor may also have the effect of stopping
-the TSC. This is typically done for thermal emergency power control to prevent
-an overheating condition, and typically, there is no way to detect that this
-condition has happened.
-
-3.7) TSC virtualization - VMX
-
-VMX provides conditional trapping of RDTSC, RDMSR, WRMSR and RDTSCP
-instructions, which is enough for full virtualization of TSC in any manner. In
-addition, VMX allows passing through the host TSC plus an additional TSC_OFFSET
-field specified in the VMCS. Special instructions must be used to read and
-write the VMCS field.
-
-3.8) TSC virtualization - SVM
-
-SVM provides conditional trapping of RDTSC, RDMSR, WRMSR and RDTSCP
-instructions, which is enough for full virtualization of TSC in any manner. In
-addition, SVM allows passing through the host TSC plus an additional offset
-field specified in the SVM control block.
-
-3.9) TSC feature bits in Linux
-
-In summary, there is no way to guarantee the TSC remains in perfect
-synchronization unless it is explicitly guaranteed by the architecture. Even
-if so, the TSCs in multi-sockets or NUMA systems may still run independently
-despite being locally consistent.
-
-The following feature bits are used by Linux to signal various TSC attributes,
-but they can only be taken to be meaningful for UP or single node systems.
-
-X86_FEATURE_TSC : The TSC is available in hardware
-X86_FEATURE_RDTSCP : The RDTSCP instruction is available
-X86_FEATURE_CONSTANT_TSC : The TSC rate is unchanged with P-states
-X86_FEATURE_NONSTOP_TSC : The TSC does not stop in C-states
-X86_FEATURE_TSC_RELIABLE : TSC sync checks are skipped (VMware)
-
-4) Virtualization Problems
-
-Timekeeping is especially problematic for virtualization because a number of
-challenges arise. The most obvious problem is that time is now shared between
-the host and, potentially, a number of virtual machines. Thus the virtual
-operating system does not run with 100% usage of the CPU, despite the fact that
-it may very well make that assumption. It may expect it to remain true to very
-exacting bounds when interrupt sources are disabled, but in reality only its
-virtual interrupt sources are disabled, and the machine may still be preempted
-at any time. This causes problems as the passage of real time, the injection
-of machine interrupts and the associated clock sources are no longer completely
-synchronized with real time.
-
-This same problem can occur on native harware to a degree, as SMM mode may
-steal cycles from the naturally on X86 systems when SMM mode is used by the
-BIOS, but not in such an extreme fashion. However, the fact that SMM mode may
-cause similar problems to virtualization makes it a good justification for
-solving many of these problems on bare metal.
-
-4.1) Interrupt clocking
-
-One of the most immediate problems that occurs with legacy operating systems
-is that the system timekeeping routines are often designed to keep track of
-time by counting periodic interrupts. These interrupts may come from the PIT
-or the RTC, but the problem is the same: the host virtualization engine may not
-be able to deliver the proper number of interrupts per second, and so guest
-time may fall behind. This is especially problematic if a high interrupt rate
-is selected, such as 1000 HZ, which is unfortunately the default for many Linux
-guests.
-
-There are three approaches to solving this problem; first, it may be possible
-to simply ignore it. Guests which have a separate time source for tracking
-'wall clock' or 'real time' may not need any adjustment of their interrupts to
-maintain proper time. If this is not sufficient, it may be necessary to inject
-additional interrupts into the guest in order to increase the effective
-interrupt rate. This approach leads to complications in extreme conditions,
-where host load or guest lag is too much to compensate for, and thus another
-solution to the problem has risen: the guest may need to become aware of lost
-ticks and compensate for them internally. Although promising in theory, the
-implementation of this policy in Linux has been extremely error prone, and a
-number of buggy variants of lost tick compensation are distributed across
-commonly used Linux systems.
-
-Windows uses periodic RTC clocking as a means of keeping time internally, and
-thus requires interrupt slewing to keep proper time. It does use a low enough
-rate (ed: is it 18.2 Hz?) however that it has not yet been a problem in
-practice.
-
-4.2) TSC sampling and serialization
-
-As the highest precision time source available, the cycle counter of the CPU
-has aroused much interest from developers. As explained above, this timer has
-many problems unique to its nature as a local, potentially unstable and
-potentially unsynchronized source. One issue which is not unique to the TSC,
-but is highlighted because of its very precise nature is sampling delay. By
-definition, the counter, once read is already old. However, it is also
-possible for the counter to be read ahead of the actual use of the result.
-This is a consequence of the superscalar execution of the instruction stream,
-which may execute instructions out of order. Such execution is called
-non-serialized. Forcing serialized execution is necessary for precise
-measurement with the TSC, and requires a serializing instruction, such as CPUID
-or an MSR read.
-
-Since CPUID may actually be virtualized by a trap and emulate mechanism, this
-serialization can pose a performance issue for hardware virtualization. An
-accurate time stamp counter reading may therefore not always be available, and
-it may be necessary for an implementation to guard against "backwards" reads of
-the TSC as seen from other CPUs, even in an otherwise perfectly synchronized
-system.
-
-4.3) Timespec aliasing
-
-Additionally, this lack of serialization from the TSC poses another challenge
-when using results of the TSC when measured against another time source. As
-the TSC is much higher precision, many possible values of the TSC may be read
-while another clock is still expressing the same value.
-
-That is, you may read (T,T+10) while external clock C maintains the same value.
-Due to non-serialized reads, you may actually end up with a range which
-fluctuates - from (T-1.. T+10). Thus, any time calculated from a TSC, but
-calibrated against an external value may have a range of valid values.
-Re-calibrating this computation may actually cause time, as computed after the
-calibration, to go backwards, compared with time computed before the
-calibration.
-
-This problem is particularly pronounced with an internal time source in Linux,
-the kernel time, which is expressed in the theoretically high resolution
-timespec - but which advances in much larger granularity intervals, sometimes
-at the rate of jiffies, and possibly in catchup modes, at a much larger step.
-
-This aliasing requires care in the computation and recalibration of kvmclock
-and any other values derived from TSC computation (such as TSC virtualization
-itself).
-
-4.4) Migration
-
-Migration of a virtual machine raises problems for timekeeping in two ways.
-First, the migration itself may take time, during which interrupts cannot be
-delivered, and after which, the guest time may need to be caught up. NTP may
-be able to help to some degree here, as the clock correction required is
-typically small enough to fall in the NTP-correctable window.
-
-An additional concern is that timers based off the TSC (or HPET, if the raw bus
-clock is exposed) may now be running at different rates, requiring compensation
-in some way in the hypervisor by virtualizing these timers. In addition,
-migrating to a faster machine may preclude the use of a passthrough TSC, as a
-faster clock cannot be made visible to a guest without the potential of time
-advancing faster than usual. A slower clock is less of a problem, as it can
-always be caught up to the original rate. KVM clock avoids these problems by
-simply storing multipliers and offsets against the TSC for the guest to convert
-back into nanosecond resolution values.
-
-4.5) Scheduling
-
-Since scheduling may be based on precise timing and firing of interrupts, the
-scheduling algorithms of an operating system may be adversely affected by
-virtualization. In theory, the effect is random and should be universally
-distributed, but in contrived as well as real scenarios (guest device access,
-causes of virtualization exits, possible context switch), this may not always
-be the case. The effect of this has not been well studied.
-
-In an attempt to work around this, several implementations have provided a
-paravirtualized scheduler clock, which reveals the true amount of CPU time for
-which a virtual machine has been running.
-
-4.6) Watchdogs
-
-Watchdog timers, such as the lock detector in Linux may fire accidentally when
-running under hardware virtualization due to timer interrupts being delayed or
-misinterpretation of the passage of real time. Usually, these warnings are
-spurious and can be ignored, but in some circumstances it may be necessary to
-disable such detection.
-
-4.7) Delays and precision timing
-
-Precise timing and delays may not be possible in a virtualized system. This
-can happen if the system is controlling physical hardware, or issues delays to
-compensate for slower I/O to and from devices. The first issue is not solvable
-in general for a virtualized system; hardware control software can't be
-adequately virtualized without a full real-time operating system, which would
-require an RT aware virtualization platform.
-
-The second issue may cause performance problems, but this is unlikely to be a
-significant issue. In many cases these delays may be eliminated through
-configuration or paravirtualization.
-
-4.8) Covert channels and leaks
-
-In addition to the above problems, time information will inevitably leak to the
-guest about the host in anything but a perfect implementation of virtualized
-time. This may allow the guest to infer the presence of a hypervisor (as in a
-red-pill type detection), and it may allow information to leak between guests
-by using CPU utilization itself as a signalling channel. Preventing such
-problems would require completely isolated virtual time which may not track
-real time any longer. This may be useful in certain security or QA contexts,
-but in general isn't recommended for real-world deployment scenarios.
+++ /dev/null
-# This creates the demonstration utility "lguest" which runs a Linux guest.
-# Missing headers? Add "-I../../include -I../../arch/x86/include"
-CFLAGS:=-m32 -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -U_FORTIFY_SOURCE
-
-all: lguest
-
-clean:
- rm -f lguest
+++ /dev/null
-#! /bin/sh
-
-set -e
-
-PREFIX=$1
-shift
-
-trap 'rm -r $TMPDIR' 0
-TMPDIR=`mktemp -d`
-
-exec 3>/dev/null
-for f; do
- while IFS="
-" read -r LINE; do
- case "$LINE" in
- *$PREFIX:[0-9]*:\**)
- NUM=`echo "$LINE" | sed "s/.*$PREFIX:\([0-9]*\).*/\1/"`
- if [ -f $TMPDIR/$NUM ]; then
- echo "$TMPDIR/$NUM already exits prior to $f"
- exit 1
- fi
- exec 3>>$TMPDIR/$NUM
- echo $f | sed 's,\.\./,,g' > $TMPDIR/.$NUM
- /bin/echo "$LINE" | sed -e "s/$PREFIX:[0-9]*//" -e "s/:\*/*/" >&3
- ;;
- *$PREFIX:[0-9]*)
- NUM=`echo "$LINE" | sed "s/.*$PREFIX:\([0-9]*\).*/\1/"`
- if [ -f $TMPDIR/$NUM ]; then
- echo "$TMPDIR/$NUM already exits prior to $f"
- exit 1
- fi
- exec 3>>$TMPDIR/$NUM
- echo $f | sed 's,\.\./,,g' > $TMPDIR/.$NUM
- /bin/echo "$LINE" | sed "s/$PREFIX:[0-9]*//" >&3
- ;;
- *:\**)
- /bin/echo "$LINE" | sed -e "s/:\*/*/" -e "s,/\*\*/,," >&3
- echo >&3
- exec 3>/dev/null
- ;;
- *)
- /bin/echo "$LINE" >&3
- ;;
- esac
- done < $f
- echo >&3
- exec 3>/dev/null
-done
-
-LASTFILE=""
-for f in $TMPDIR/*; do
- if [ "$LASTFILE" != $(cat $TMPDIR/.$(basename $f) ) ]; then
- LASTFILE=$(cat $TMPDIR/.$(basename $f) )
- echo "[ $LASTFILE ]"
- fi
- cat $f
-done
-
+++ /dev/null
-/*P:100
- * This is the Launcher code, a simple program which lays out the "physical"
- * memory for the new Guest by mapping the kernel image and the virtual
- * devices, then opens /dev/lguest to tell the kernel about the Guest and
- * control it.
-:*/
-#define _LARGEFILE64_SOURCE
-#define _GNU_SOURCE
-#include <stdio.h>
-#include <string.h>
-#include <unistd.h>
-#include <err.h>
-#include <stdint.h>
-#include <stdlib.h>
-#include <elf.h>
-#include <sys/mman.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/wait.h>
-#include <sys/eventfd.h>
-#include <fcntl.h>
-#include <stdbool.h>
-#include <errno.h>
-#include <ctype.h>
-#include <sys/socket.h>
-#include <sys/ioctl.h>
-#include <sys/time.h>
-#include <time.h>
-#include <netinet/in.h>
-#include <net/if.h>
-#include <linux/sockios.h>
-#include <linux/if_tun.h>
-#include <sys/uio.h>
-#include <termios.h>
-#include <getopt.h>
-#include <assert.h>
-#include <sched.h>
-#include <limits.h>
-#include <stddef.h>
-#include <signal.h>
-#include <pwd.h>
-#include <grp.h>
-
-#include <linux/virtio_config.h>
-#include <linux/virtio_net.h>
-#include <linux/virtio_blk.h>
-#include <linux/virtio_console.h>
-#include <linux/virtio_rng.h>
-#include <linux/virtio_ring.h>
-#include <asm/bootparam.h>
-#include "../../include/linux/lguest_launcher.h"
-/*L:110
- * We can ignore the 42 include files we need for this program, but I do want
- * to draw attention to the use of kernel-style types.
- *
- * As Linus said, "C is a Spartan language, and so should your naming be." I
- * like these abbreviations, so we define them here. Note that u64 is always
- * unsigned long long, which works on all Linux systems: this means that we can
- * use %llu in printf for any u64.
- */
-typedef unsigned long long u64;
-typedef uint32_t u32;
-typedef uint16_t u16;
-typedef uint8_t u8;
-/*:*/
-
-#define PAGE_PRESENT 0x7 /* Present, RW, Execute */
-#define BRIDGE_PFX "bridge:"
-#ifndef SIOCBRADDIF
-#define SIOCBRADDIF 0x89a2 /* add interface to bridge */
-#endif
-/* We can have up to 256 pages for devices. */
-#define DEVICE_PAGES 256
-/* This will occupy 3 pages: it must be a power of 2. */
-#define VIRTQUEUE_NUM 256
-
-/*L:120
- * verbose is both a global flag and a macro. The C preprocessor allows
- * this, and although I wouldn't recommend it, it works quite nicely here.
- */
-static bool verbose;
-#define verbose(args...) \
- do { if (verbose) printf(args); } while(0)
-/*:*/
-
-/* The pointer to the start of guest memory. */
-static void *guest_base;
-/* The maximum guest physical address allowed, and maximum possible. */
-static unsigned long guest_limit, guest_max;
-/* The /dev/lguest file descriptor. */
-static int lguest_fd;
-
-/* a per-cpu variable indicating whose vcpu is currently running */
-static unsigned int __thread cpu_id;
-
-/* This is our list of devices. */
-struct device_list {
- /* Counter to assign interrupt numbers. */
- unsigned int next_irq;
-
- /* Counter to print out convenient device numbers. */
- unsigned int device_num;
-
- /* The descriptor page for the devices. */
- u8 *descpage;
-
- /* A single linked list of devices. */
- struct device *dev;
- /* And a pointer to the last device for easy append. */
- struct device *lastdev;
-};
-
-/* The list of Guest devices, based on command line arguments. */
-static struct device_list devices;
-
-/* The device structure describes a single device. */
-struct device {
- /* The linked-list pointer. */
- struct device *next;
-
- /* The device's descriptor, as mapped into the Guest. */
- struct lguest_device_desc *desc;
-
- /* We can't trust desc values once Guest has booted: we use these. */
- unsigned int feature_len;
- unsigned int num_vq;
-
- /* The name of this device, for --verbose. */
- const char *name;
-
- /* Any queues attached to this device */
- struct virtqueue *vq;
-
- /* Is it operational */
- bool running;
-
- /* Does Guest want an intrrupt on empty? */
- bool irq_on_empty;
-
- /* Device-specific data. */
- void *priv;
-};
-
-/* The virtqueue structure describes a queue attached to a device. */
-struct virtqueue {
- struct virtqueue *next;
-
- /* Which device owns me. */
- struct device *dev;
-
- /* The configuration for this queue. */
- struct lguest_vqconfig config;
-
- /* The actual ring of buffers. */
- struct vring vring;
-
- /* Last available index we saw. */
- u16 last_avail_idx;
-
- /* How many are used since we sent last irq? */
- unsigned int pending_used;
-
- /* Eventfd where Guest notifications arrive. */
- int eventfd;
-
- /* Function for the thread which is servicing this virtqueue. */
- void (*service)(struct virtqueue *vq);
- pid_t thread;
-};
-
-/* Remember the arguments to the program so we can "reboot" */
-static char **main_args;
-
-/* The original tty settings to restore on exit. */
-static struct termios orig_term;
-
-/*
- * We have to be careful with barriers: our devices are all run in separate
- * threads and so we need to make sure that changes visible to the Guest happen
- * in precise order.
- */
-#define wmb() __asm__ __volatile__("" : : : "memory")
-#define mb() __asm__ __volatile__("" : : : "memory")
-
-/*
- * Convert an iovec element to the given type.
- *
- * This is a fairly ugly trick: we need to know the size of the type and
- * alignment requirement to check the pointer is kosher. It's also nice to
- * have the name of the type in case we report failure.
- *
- * Typing those three things all the time is cumbersome and error prone, so we
- * have a macro which sets them all up and passes to the real function.
- */
-#define convert(iov, type) \
- ((type *)_convert((iov), sizeof(type), __alignof__(type), #type))
-
-static void *_convert(struct iovec *iov, size_t size, size_t align,
- const char *name)
-{
- if (iov->iov_len != size)
- errx(1, "Bad iovec size %zu for %s", iov->iov_len, name);
- if ((unsigned long)iov->iov_base % align != 0)
- errx(1, "Bad alignment %p for %s", iov->iov_base, name);
- return iov->iov_base;
-}
-
-/* Wrapper for the last available index. Makes it easier to change. */
-#define lg_last_avail(vq) ((vq)->last_avail_idx)
-
-/*
- * The virtio configuration space is defined to be little-endian. x86 is
- * little-endian too, but it's nice to be explicit so we have these helpers.
- */
-#define cpu_to_le16(v16) (v16)
-#define cpu_to_le32(v32) (v32)
-#define cpu_to_le64(v64) (v64)
-#define le16_to_cpu(v16) (v16)
-#define le32_to_cpu(v32) (v32)
-#define le64_to_cpu(v64) (v64)
-
-/* Is this iovec empty? */
-static bool iov_empty(const struct iovec iov[], unsigned int num_iov)
-{
- unsigned int i;
-
- for (i = 0; i < num_iov; i++)
- if (iov[i].iov_len)
- return false;
- return true;
-}
-
-/* Take len bytes from the front of this iovec. */
-static void iov_consume(struct iovec iov[], unsigned num_iov, unsigned len)
-{
- unsigned int i;
-
- for (i = 0; i < num_iov; i++) {
- unsigned int used;
-
- used = iov[i].iov_len < len ? iov[i].iov_len : len;
- iov[i].iov_base += used;
- iov[i].iov_len -= used;
- len -= used;
- }
- assert(len == 0);
-}
-
-/* The device virtqueue descriptors are followed by feature bitmasks. */
-static u8 *get_feature_bits(struct device *dev)
-{
- return (u8 *)(dev->desc + 1)
- + dev->num_vq * sizeof(struct lguest_vqconfig);
-}
-
-/*L:100
- * The Launcher code itself takes us out into userspace, that scary place where
- * pointers run wild and free! Unfortunately, like most userspace programs,
- * it's quite boring (which is why everyone likes to hack on the kernel!).
- * Perhaps if you make up an Lguest Drinking Game at this point, it will get
- * you through this section. Or, maybe not.
- *
- * The Launcher sets up a big chunk of memory to be the Guest's "physical"
- * memory and stores it in "guest_base". In other words, Guest physical ==
- * Launcher virtual with an offset.
- *
- * This can be tough to get your head around, but usually it just means that we
- * use these trivial conversion functions when the Guest gives us its
- * "physical" addresses:
- */
-static void *from_guest_phys(unsigned long addr)
-{
- return guest_base + addr;
-}
-
-static unsigned long to_guest_phys(const void *addr)
-{
- return (addr - guest_base);
-}
-
-/*L:130
- * Loading the Kernel.
- *
- * We start with couple of simple helper routines. open_or_die() avoids
- * error-checking code cluttering the callers:
- */
-static int open_or_die(const char *name, int flags)
-{
- int fd = open(name, flags);
- if (fd < 0)
- err(1, "Failed to open %s", name);
- return fd;
-}
-
-/* map_zeroed_pages() takes a number of pages. */
-static void *map_zeroed_pages(unsigned int num)
-{
- int fd = open_or_die("/dev/zero", O_RDONLY);
- void *addr;
-
- /*
- * We use a private mapping (ie. if we write to the page, it will be
- * copied). We allocate an extra two pages PROT_NONE to act as guard
- * pages against read/write attempts that exceed allocated space.
- */
- addr = mmap(NULL, getpagesize() * (num+2),
- PROT_NONE, MAP_PRIVATE, fd, 0);
-
- if (addr == MAP_FAILED)
- err(1, "Mmapping %u pages of /dev/zero", num);
-
- if (mprotect(addr + getpagesize(), getpagesize() * num,
- PROT_READ|PROT_WRITE) == -1)
- err(1, "mprotect rw %u pages failed", num);
-
- /*
- * One neat mmap feature is that you can close the fd, and it
- * stays mapped.
- */
- close(fd);
-
- /* Return address after PROT_NONE page */
- return addr + getpagesize();
-}
-
-/* Get some more pages for a device. */
-static void *get_pages(unsigned int num)
-{
- void *addr = from_guest_phys(guest_limit);
-
- guest_limit += num * getpagesize();
- if (guest_limit > guest_max)
- errx(1, "Not enough memory for devices");
- return addr;
-}
-
-/*
- * This routine is used to load the kernel or initrd. It tries mmap, but if
- * that fails (Plan 9's kernel file isn't nicely aligned on page boundaries),
- * it falls back to reading the memory in.
- */
-static void map_at(int fd, void *addr, unsigned long offset, unsigned long len)
-{
- ssize_t r;
-
- /*
- * We map writable even though for some segments are marked read-only.
- * The kernel really wants to be writable: it patches its own
- * instructions.
- *
- * MAP_PRIVATE means that the page won't be copied until a write is
- * done to it. This allows us to share untouched memory between
- * Guests.
- */
- if (mmap(addr, len, PROT_READ|PROT_WRITE,
- MAP_FIXED|MAP_PRIVATE, fd, offset) != MAP_FAILED)
- return;
-
- /* pread does a seek and a read in one shot: saves a few lines. */
- r = pread(fd, addr, len, offset);
- if (r != len)
- err(1, "Reading offset %lu len %lu gave %zi", offset, len, r);
-}
-
-/*
- * This routine takes an open vmlinux image, which is in ELF, and maps it into
- * the Guest memory. ELF = Embedded Linking Format, which is the format used
- * by all modern binaries on Linux including the kernel.
- *
- * The ELF headers give *two* addresses: a physical address, and a virtual
- * address. We use the physical address; the Guest will map itself to the
- * virtual address.
- *
- * We return the starting address.
- */
-static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr)
-{
- Elf32_Phdr phdr[ehdr->e_phnum];
- unsigned int i;
-
- /*
- * Sanity checks on the main ELF header: an x86 executable with a
- * reasonable number of correctly-sized program headers.
- */
- if (ehdr->e_type != ET_EXEC
- || ehdr->e_machine != EM_386
- || ehdr->e_phentsize != sizeof(Elf32_Phdr)
- || ehdr->e_phnum < 1 || ehdr->e_phnum > 65536U/sizeof(Elf32_Phdr))
- errx(1, "Malformed elf header");
-
- /*
- * An ELF executable contains an ELF header and a number of "program"
- * headers which indicate which parts ("segments") of the program to
- * load where.
- */
-
- /* We read in all the program headers at once: */
- if (lseek(elf_fd, ehdr->e_phoff, SEEK_SET) < 0)
- err(1, "Seeking to program headers");
- if (read(elf_fd, phdr, sizeof(phdr)) != sizeof(phdr))
- err(1, "Reading program headers");
-
- /*
- * Try all the headers: there are usually only three. A read-only one,
- * a read-write one, and a "note" section which we don't load.
- */
- for (i = 0; i < ehdr->e_phnum; i++) {
- /* If this isn't a loadable segment, we ignore it */
- if (phdr[i].p_type != PT_LOAD)
- continue;
-
- verbose("Section %i: size %i addr %p\n",
- i, phdr[i].p_memsz, (void *)phdr[i].p_paddr);
-
- /* We map this section of the file at its physical address. */
- map_at(elf_fd, from_guest_phys(phdr[i].p_paddr),
- phdr[i].p_offset, phdr[i].p_filesz);
- }
-
- /* The entry point is given in the ELF header. */
- return ehdr->e_entry;
-}
-
-/*L:150
- * A bzImage, unlike an ELF file, is not meant to be loaded. You're supposed
- * to jump into it and it will unpack itself. We used to have to perform some
- * hairy magic because the unpacking code scared me.
- *
- * Fortunately, Jeremy Fitzhardinge convinced me it wasn't that hard and wrote
- * a small patch to jump over the tricky bits in the Guest, so now we just read
- * the funky header so we know where in the file to load, and away we go!
- */
-static unsigned long load_bzimage(int fd)
-{
- struct boot_params boot;
- int r;
- /* Modern bzImages get loaded at 1M. */
- void *p = from_guest_phys(0x100000);
-
- /*
- * Go back to the start of the file and read the header. It should be
- * a Linux boot header (see Documentation/x86/i386/boot.txt)
- */
- lseek(fd, 0, SEEK_SET);
- read(fd, &boot, sizeof(boot));
-
- /* Inside the setup_hdr, we expect the magic "HdrS" */
- if (memcmp(&boot.hdr.header, "HdrS", 4) != 0)
- errx(1, "This doesn't look like a bzImage to me");
-
- /* Skip over the extra sectors of the header. */
- lseek(fd, (boot.hdr.setup_sects+1) * 512, SEEK_SET);
-
- /* Now read everything into memory. in nice big chunks. */
- while ((r = read(fd, p, 65536)) > 0)
- p += r;
-
- /* Finally, code32_start tells us where to enter the kernel. */
- return boot.hdr.code32_start;
-}
-
-/*L:140
- * Loading the kernel is easy when it's a "vmlinux", but most kernels
- * come wrapped up in the self-decompressing "bzImage" format. With a little
- * work, we can load those, too.
- */
-static unsigned long load_kernel(int fd)
-{
- Elf32_Ehdr hdr;
-
- /* Read in the first few bytes. */
- if (read(fd, &hdr, sizeof(hdr)) != sizeof(hdr))
- err(1, "Reading kernel");
-
- /* If it's an ELF file, it starts with "\177ELF" */
- if (memcmp(hdr.e_ident, ELFMAG, SELFMAG) == 0)
- return map_elf(fd, &hdr);
-
- /* Otherwise we assume it's a bzImage, and try to load it. */
- return load_bzimage(fd);
-}
-
-/*
- * This is a trivial little helper to align pages. Andi Kleen hated it because
- * it calls getpagesize() twice: "it's dumb code."
- *
- * Kernel guys get really het up about optimization, even when it's not
- * necessary. I leave this code as a reaction against that.
- */
-static inline unsigned long page_align(unsigned long addr)
-{
- /* Add upwards and truncate downwards. */
- return ((addr + getpagesize()-1) & ~(getpagesize()-1));
-}
-
-/*L:180
- * An "initial ram disk" is a disk image loaded into memory along with the
- * kernel which the kernel can use to boot from without needing any drivers.
- * Most distributions now use this as standard: the initrd contains the code to
- * load the appropriate driver modules for the current machine.
- *
- * Importantly, James Morris works for RedHat, and Fedora uses initrds for its
- * kernels. He sent me this (and tells me when I break it).
- */
-static unsigned long load_initrd(const char *name, unsigned long mem)
-{
- int ifd;
- struct stat st;
- unsigned long len;
-
- ifd = open_or_die(name, O_RDONLY);
- /* fstat() is needed to get the file size. */
- if (fstat(ifd, &st) < 0)
- err(1, "fstat() on initrd '%s'", name);
-
- /*
- * We map the initrd at the top of memory, but mmap wants it to be
- * page-aligned, so we round the size up for that.
- */
- len = page_align(st.st_size);
- map_at(ifd, from_guest_phys(mem - len), 0, st.st_size);
- /*
- * Once a file is mapped, you can close the file descriptor. It's a
- * little odd, but quite useful.
- */
- close(ifd);
- verbose("mapped initrd %s size=%lu @ %p\n", name, len, (void*)mem-len);
-
- /* We return the initrd size. */
- return len;
-}
-/*:*/
-
-/*
- * Simple routine to roll all the commandline arguments together with spaces
- * between them.
- */
-static void concat(char *dst, char *args[])
-{
- unsigned int i, len = 0;
-
- for (i = 0; args[i]; i++) {
- if (i) {
- strcat(dst+len, " ");
- len++;
- }
- strcpy(dst+len, args[i]);
- len += strlen(args[i]);
- }
- /* In case it's empty. */
- dst[len] = '\0';
-}
-
-/*L:185
- * This is where we actually tell the kernel to initialize the Guest. We
- * saw the arguments it expects when we looked at initialize() in lguest_user.c:
- * the base of Guest "physical" memory, the top physical page to allow and the
- * entry point for the Guest.
- */
-static void tell_kernel(unsigned long start)
-{
- unsigned long args[] = { LHREQ_INITIALIZE,
- (unsigned long)guest_base,
- guest_limit / getpagesize(), start };
- verbose("Guest: %p - %p (%#lx)\n",
- guest_base, guest_base + guest_limit, guest_limit);
- lguest_fd = open_or_die("/dev/lguest", O_RDWR);
- if (write(lguest_fd, args, sizeof(args)) < 0)
- err(1, "Writing to /dev/lguest");
-}
-/*:*/
-
-/*L:200
- * Device Handling.
- *
- * When the Guest gives us a buffer, it sends an array of addresses and sizes.
- * We need to make sure it's not trying to reach into the Launcher itself, so
- * we have a convenient routine which checks it and exits with an error message
- * if something funny is going on:
- */
-static void *_check_pointer(unsigned long addr, unsigned int size,
- unsigned int line)
-{
- /*
- * Check if the requested address and size exceeds the allocated memory,
- * or addr + size wraps around.
- */
- if ((addr + size) > guest_limit || (addr + size) < addr)
- errx(1, "%s:%i: Invalid address %#lx", __FILE__, line, addr);
- /*
- * We return a pointer for the caller's convenience, now we know it's
- * safe to use.
- */
- return from_guest_phys(addr);
-}
-/* A macro which transparently hands the line number to the real function. */
-#define check_pointer(addr,size) _check_pointer(addr, size, __LINE__)
-
-/*
- * Each buffer in the virtqueues is actually a chain of descriptors. This
- * function returns the next descriptor in the chain, or vq->vring.num if we're
- * at the end.
- */
-static unsigned next_desc(struct vring_desc *desc,
- unsigned int i, unsigned int max)
-{
- unsigned int next;
-
- /* If this descriptor says it doesn't chain, we're done. */
- if (!(desc[i].flags & VRING_DESC_F_NEXT))
- return max;
-
- /* Check they're not leading us off end of descriptors. */
- next = desc[i].next;
- /* Make sure compiler knows to grab that: we don't want it changing! */
- wmb();
-
- if (next >= max)
- errx(1, "Desc next is %u", next);
-
- return next;
-}
-
-/*
- * This actually sends the interrupt for this virtqueue, if we've used a
- * buffer.
- */
-static void trigger_irq(struct virtqueue *vq)
-{
- unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
-
- /* Don't inform them if nothing used. */
- if (!vq->pending_used)
- return;
- vq->pending_used = 0;
-
- /* If they don't want an interrupt, don't send one... */
- if (vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT) {
- /* ... unless they've asked us to force one on empty. */
- if (!vq->dev->irq_on_empty
- || lg_last_avail(vq) != vq->vring.avail->idx)
- return;
- }
-
- /* Send the Guest an interrupt tell them we used something up. */
- if (write(lguest_fd, buf, sizeof(buf)) != 0)
- err(1, "Triggering irq %i", vq->config.irq);
-}
-
-/*
- * This looks in the virtqueue for the first available buffer, and converts
- * it to an iovec for convenient access. Since descriptors consist of some
- * number of output then some number of input descriptors, it's actually two
- * iovecs, but we pack them into one and note how many of each there were.
- *
- * This function waits if necessary, and returns the descriptor number found.
- */
-static unsigned wait_for_vq_desc(struct virtqueue *vq,
- struct iovec iov[],
- unsigned int *out_num, unsigned int *in_num)
-{
- unsigned int i, head, max;
- struct vring_desc *desc;
- u16 last_avail = lg_last_avail(vq);
-
- /* There's nothing available? */
- while (last_avail == vq->vring.avail->idx) {
- u64 event;
-
- /*
- * Since we're about to sleep, now is a good time to tell the
- * Guest about what we've used up to now.
- */
- trigger_irq(vq);
-
- /* OK, now we need to know about added descriptors. */
- vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
-
- /*
- * They could have slipped one in as we were doing that: make
- * sure it's written, then check again.
- */
- mb();
- if (last_avail != vq->vring.avail->idx) {
- vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
- break;
- }
-
- /* Nothing new? Wait for eventfd to tell us they refilled. */
- if (read(vq->eventfd, &event, sizeof(event)) != sizeof(event))
- errx(1, "Event read failed?");
-
- /* We don't need to be notified again. */
- vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
- }
-
- /* Check it isn't doing very strange things with descriptor numbers. */
- if ((u16)(vq->vring.avail->idx - last_avail) > vq->vring.num)
- errx(1, "Guest moved used index from %u to %u",
- last_avail, vq->vring.avail->idx);
-
- /*
- * Grab the next descriptor number they're advertising, and increment
- * the index we've seen.
- */
- head = vq->vring.avail->ring[last_avail % vq->vring.num];
- lg_last_avail(vq)++;
-
- /* If their number is silly, that's a fatal mistake. */
- if (head >= vq->vring.num)
- errx(1, "Guest says index %u is available", head);
-
- /* When we start there are none of either input nor output. */
- *out_num = *in_num = 0;
-
- max = vq->vring.num;
- desc = vq->vring.desc;
- i = head;
-
- /*
- * If this is an indirect entry, then this buffer contains a descriptor
- * table which we handle as if it's any normal descriptor chain.
- */
- if (desc[i].flags & VRING_DESC_F_INDIRECT) {
- if (desc[i].len % sizeof(struct vring_desc))
- errx(1, "Invalid size for indirect buffer table");
-
- max = desc[i].len / sizeof(struct vring_desc);
- desc = check_pointer(desc[i].addr, desc[i].len);
- i = 0;
- }
-
- do {
- /* Grab the first descriptor, and check it's OK. */
- iov[*out_num + *in_num].iov_len = desc[i].len;
- iov[*out_num + *in_num].iov_base
- = check_pointer(desc[i].addr, desc[i].len);
- /* If this is an input descriptor, increment that count. */
- if (desc[i].flags & VRING_DESC_F_WRITE)
- (*in_num)++;
- else {
- /*
- * If it's an output descriptor, they're all supposed
- * to come before any input descriptors.
- */
- if (*in_num)
- errx(1, "Descriptor has out after in");
- (*out_num)++;
- }
-
- /* If we've got too many, that implies a descriptor loop. */
- if (*out_num + *in_num > max)
- errx(1, "Looped descriptor");
- } while ((i = next_desc(desc, i, max)) != max);
-
- return head;
-}
-
-/*
- * After we've used one of their buffers, we tell the Guest about it. Sometime
- * later we'll want to send them an interrupt using trigger_irq(); note that
- * wait_for_vq_desc() does that for us if it has to wait.
- */
-static void add_used(struct virtqueue *vq, unsigned int head, int len)
-{
- struct vring_used_elem *used;
-
- /*
- * The virtqueue contains a ring of used buffers. Get a pointer to the
- * next entry in that used ring.
- */
- used = &vq->vring.used->ring[vq->vring.used->idx % vq->vring.num];
- used->id = head;
- used->len = len;
- /* Make sure buffer is written before we update index. */
- wmb();
- vq->vring.used->idx++;
- vq->pending_used++;
-}
-
-/* And here's the combo meal deal. Supersize me! */
-static void add_used_and_trigger(struct virtqueue *vq, unsigned head, int len)
-{
- add_used(vq, head, len);
- trigger_irq(vq);
-}
-
-/*
- * The Console
- *
- * We associate some data with the console for our exit hack.
- */
-struct console_abort {
- /* How many times have they hit ^C? */
- int count;
- /* When did they start? */
- struct timeval start;
-};
-
-/* This is the routine which handles console input (ie. stdin). */
-static void console_input(struct virtqueue *vq)
-{
- int len;
- unsigned int head, in_num, out_num;
- struct console_abort *abort = vq->dev->priv;
- struct iovec iov[vq->vring.num];
-
- /* Make sure there's a descriptor available. */
- head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
- if (out_num)
- errx(1, "Output buffers in console in queue?");
-
- /* Read into it. This is where we usually wait. */
- len = readv(STDIN_FILENO, iov, in_num);
- if (len <= 0) {
- /* Ran out of input? */
- warnx("Failed to get console input, ignoring console.");
- /*
- * For simplicity, dying threads kill the whole Launcher. So
- * just nap here.
- */
- for (;;)
- pause();
- }
-
- /* Tell the Guest we used a buffer. */
- add_used_and_trigger(vq, head, len);
-
- /*
- * Three ^C within one second? Exit.
- *
- * This is such a hack, but works surprisingly well. Each ^C has to
- * be in a buffer by itself, so they can't be too fast. But we check
- * that we get three within about a second, so they can't be too
- * slow.
- */
- if (len != 1 || ((char *)iov[0].iov_base)[0] != 3) {
- abort->count = 0;
- return;
- }
-
- abort->count++;
- if (abort->count == 1)
- gettimeofday(&abort->start, NULL);
- else if (abort->count == 3) {
- struct timeval now;
- gettimeofday(&now, NULL);
- /* Kill all Launcher processes with SIGINT, like normal ^C */
- if (now.tv_sec <= abort->start.tv_sec+1)
- kill(0, SIGINT);
- abort->count = 0;
- }
-}
-
-/* This is the routine which handles console output (ie. stdout). */
-static void console_output(struct virtqueue *vq)
-{
- unsigned int head, out, in;
- struct iovec iov[vq->vring.num];
-
- /* We usually wait in here, for the Guest to give us something. */
- head = wait_for_vq_desc(vq, iov, &out, &in);
- if (in)
- errx(1, "Input buffers in console output queue?");
-
- /* writev can return a partial write, so we loop here. */
- while (!iov_empty(iov, out)) {
- int len = writev(STDOUT_FILENO, iov, out);
- if (len <= 0)
- err(1, "Write to stdout gave %i", len);
- iov_consume(iov, out, len);
- }
-
- /*
- * We're finished with that buffer: if we're going to sleep,
- * wait_for_vq_desc() will prod the Guest with an interrupt.
- */
- add_used(vq, head, 0);
-}
-
-/*
- * The Network
- *
- * Handling output for network is also simple: we get all the output buffers
- * and write them to /dev/net/tun.
- */
-struct net_info {
- int tunfd;
-};
-
-static void net_output(struct virtqueue *vq)
-{
- struct net_info *net_info = vq->dev->priv;
- unsigned int head, out, in;
- struct iovec iov[vq->vring.num];
-
- /* We usually wait in here for the Guest to give us a packet. */
- head = wait_for_vq_desc(vq, iov, &out, &in);
- if (in)
- errx(1, "Input buffers in net output queue?");
- /*
- * Send the whole thing through to /dev/net/tun. It expects the exact
- * same format: what a coincidence!
- */
- if (writev(net_info->tunfd, iov, out) < 0)
- errx(1, "Write to tun failed?");
-
- /*
- * Done with that one; wait_for_vq_desc() will send the interrupt if
- * all packets are processed.
- */
- add_used(vq, head, 0);
-}
-
-/*
- * Handling network input is a bit trickier, because I've tried to optimize it.
- *
- * First we have a helper routine which tells is if from this file descriptor
- * (ie. the /dev/net/tun device) will block:
- */
-static bool will_block(int fd)
-{
- fd_set fdset;
- struct timeval zero = { 0, 0 };
- FD_ZERO(&fdset);
- FD_SET(fd, &fdset);
- return select(fd+1, &fdset, NULL, NULL, &zero) != 1;
-}
-
-/*
- * This handles packets coming in from the tun device to our Guest. Like all
- * service routines, it gets called again as soon as it returns, so you don't
- * see a while(1) loop here.
- */
-static void net_input(struct virtqueue *vq)
-{
- int len;
- unsigned int head, out, in;
- struct iovec iov[vq->vring.num];
- struct net_info *net_info = vq->dev->priv;
-
- /*
- * Get a descriptor to write an incoming packet into. This will also
- * send an interrupt if they're out of descriptors.
- */
- head = wait_for_vq_desc(vq, iov, &out, &in);
- if (out)
- errx(1, "Output buffers in net input queue?");
-
- /*
- * If it looks like we'll block reading from the tun device, send them
- * an interrupt.
- */
- if (vq->pending_used && will_block(net_info->tunfd))
- trigger_irq(vq);
-
- /*
- * Read in the packet. This is where we normally wait (when there's no
- * incoming network traffic).
- */
- len = readv(net_info->tunfd, iov, in);
- if (len <= 0)
- err(1, "Failed to read from tun.");
-
- /*
- * Mark that packet buffer as used, but don't interrupt here. We want
- * to wait until we've done as much work as we can.
- */
- add_used(vq, head, len);
-}
-/*:*/
-
-/* This is the helper to create threads: run the service routine in a loop. */
-static int do_thread(void *_vq)
-{
- struct virtqueue *vq = _vq;
-
- for (;;)
- vq->service(vq);
- return 0;
-}
-
-/*
- * When a child dies, we kill our entire process group with SIGTERM. This
- * also has the side effect that the shell restores the console for us!
- */
-static void kill_launcher(int signal)
-{
- kill(0, SIGTERM);
-}
-
-static void reset_device(struct device *dev)
-{
- struct virtqueue *vq;
-
- verbose("Resetting device %s\n", dev->name);
-
- /* Clear any features they've acked. */
- memset(get_feature_bits(dev) + dev->feature_len, 0, dev->feature_len);
-
- /* We're going to be explicitly killing threads, so ignore them. */
- signal(SIGCHLD, SIG_IGN);
-
- /* Zero out the virtqueues, get rid of their threads */
- for (vq = dev->vq; vq; vq = vq->next) {
- if (vq->thread != (pid_t)-1) {
- kill(vq->thread, SIGTERM);
- waitpid(vq->thread, NULL, 0);
- vq->thread = (pid_t)-1;
- }
- memset(vq->vring.desc, 0,
- vring_size(vq->config.num, LGUEST_VRING_ALIGN));
- lg_last_avail(vq) = 0;
- }
- dev->running = false;
-
- /* Now we care if threads die. */
- signal(SIGCHLD, (void *)kill_launcher);
-}
-
-/*L:216
- * This actually creates the thread which services the virtqueue for a device.
- */
-static void create_thread(struct virtqueue *vq)
-{
- /*
- * Create stack for thread. Since the stack grows upwards, we point
- * the stack pointer to the end of this region.
- */
- char *stack = malloc(32768);
- unsigned long args[] = { LHREQ_EVENTFD,
- vq->config.pfn*getpagesize(), 0 };
-
- /* Create a zero-initialized eventfd. */
- vq->eventfd = eventfd(0, 0);
- if (vq->eventfd < 0)
- err(1, "Creating eventfd");
- args[2] = vq->eventfd;
-
- /*
- * Attach an eventfd to this virtqueue: it will go off when the Guest
- * does an LHCALL_NOTIFY for this vq.
- */
- if (write(lguest_fd, &args, sizeof(args)) != 0)
- err(1, "Attaching eventfd");
-
- /*
- * CLONE_VM: because it has to access the Guest memory, and SIGCHLD so
- * we get a signal if it dies.
- */
- vq->thread = clone(do_thread, stack + 32768, CLONE_VM | SIGCHLD, vq);
- if (vq->thread == (pid_t)-1)
- err(1, "Creating clone");
-
- /* We close our local copy now the child has it. */
- close(vq->eventfd);
-}
-
-static bool accepted_feature(struct device *dev, unsigned int bit)
-{
- const u8 *features = get_feature_bits(dev) + dev->feature_len;
-
- if (dev->feature_len < bit / CHAR_BIT)
- return false;
- return features[bit / CHAR_BIT] & (1 << (bit % CHAR_BIT));
-}
-
-static void start_device(struct device *dev)
-{
- unsigned int i;
- struct virtqueue *vq;
-
- verbose("Device %s OK: offered", dev->name);
- for (i = 0; i < dev->feature_len; i++)
- verbose(" %02x", get_feature_bits(dev)[i]);
- verbose(", accepted");
- for (i = 0; i < dev->feature_len; i++)
- verbose(" %02x", get_feature_bits(dev)
- [dev->feature_len+i]);
-
- dev->irq_on_empty = accepted_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY);
-
- for (vq = dev->vq; vq; vq = vq->next) {
- if (vq->service)
- create_thread(vq);
- }
- dev->running = true;
-}
-
-static void cleanup_devices(void)
-{
- struct device *dev;
-
- for (dev = devices.dev; dev; dev = dev->next)
- reset_device(dev);
-
- /* If we saved off the original terminal settings, restore them now. */
- if (orig_term.c_lflag & (ISIG|ICANON|ECHO))
- tcsetattr(STDIN_FILENO, TCSANOW, &orig_term);
-}
-
-/* When the Guest tells us they updated the status field, we handle it. */
-static void update_device_status(struct device *dev)
-{
- /* A zero status is a reset, otherwise it's a set of flags. */
- if (dev->desc->status == 0)
- reset_device(dev);
- else if (dev->desc->status & VIRTIO_CONFIG_S_FAILED) {
- warnx("Device %s configuration FAILED", dev->name);
- if (dev->running)
- reset_device(dev);
- } else if (dev->desc->status & VIRTIO_CONFIG_S_DRIVER_OK) {
- if (!dev->running)
- start_device(dev);
- }
-}
-
-/*L:215
- * This is the generic routine we call when the Guest uses LHCALL_NOTIFY. In
- * particular, it's used to notify us of device status changes during boot.
- */
-static void handle_output(unsigned long addr)
-{
- struct device *i;
-
- /* Check each device. */
- for (i = devices.dev; i; i = i->next) {
- struct virtqueue *vq;
-
- /*
- * Notifications to device descriptors mean they updated the
- * device status.
- */
- if (from_guest_phys(addr) == i->desc) {
- update_device_status(i);
- return;
- }
-
- /*
- * Devices *can* be used before status is set to DRIVER_OK.
- * The original plan was that they would never do this: they
- * would always finish setting up their status bits before
- * actually touching the virtqueues. In practice, we allowed
- * them to, and they do (eg. the disk probes for partition
- * tables as part of initialization).
- *
- * If we see this, we start the device: once it's running, we
- * expect the device to catch all the notifications.
- */
- for (vq = i->vq; vq; vq = vq->next) {
- if (addr != vq->config.pfn*getpagesize())
- continue;
- if (i->running)
- errx(1, "Notification on running %s", i->name);
- /* This just calls create_thread() for each virtqueue */
- start_device(i);
- return;
- }
- }
-
- /*
- * Early console write is done using notify on a nul-terminated string
- * in Guest memory. It's also great for hacking debugging messages
- * into a Guest.
- */
- if (addr >= guest_limit)
- errx(1, "Bad NOTIFY %#lx", addr);
-
- write(STDOUT_FILENO, from_guest_phys(addr),
- strnlen(from_guest_phys(addr), guest_limit - addr));
-}
-
-/*L:190
- * Device Setup
- *
- * All devices need a descriptor so the Guest knows it exists, and a "struct
- * device" so the Launcher can keep track of it. We have common helper
- * routines to allocate and manage them.
- */
-
-/*
- * The layout of the device page is a "struct lguest_device_desc" followed by a
- * number of virtqueue descriptors, then two sets of feature bits, then an
- * array of configuration bytes. This routine returns the configuration
- * pointer.
- */
-static u8 *device_config(const struct device *dev)
-{
- return (void *)(dev->desc + 1)
- + dev->num_vq * sizeof(struct lguest_vqconfig)
- + dev->feature_len * 2;
-}
-
-/*
- * This routine allocates a new "struct lguest_device_desc" from descriptor
- * table page just above the Guest's normal memory. It returns a pointer to
- * that descriptor.
- */
-static struct lguest_device_desc *new_dev_desc(u16 type)
-{
- struct lguest_device_desc d = { .type = type };
- void *p;
-
- /* Figure out where the next device config is, based on the last one. */
- if (devices.lastdev)
- p = device_config(devices.lastdev)
- + devices.lastdev->desc->config_len;
- else
- p = devices.descpage;
-
- /* We only have one page for all the descriptors. */
- if (p + sizeof(d) > (void *)devices.descpage + getpagesize())
- errx(1, "Too many devices");
-
- /* p might not be aligned, so we memcpy in. */
- return memcpy(p, &d, sizeof(d));
-}
-
-/*
- * Each device descriptor is followed by the description of its virtqueues. We
- * specify how many descriptors the virtqueue is to have.
- */
-static void add_virtqueue(struct device *dev, unsigned int num_descs,
- void (*service)(struct virtqueue *))
-{
- unsigned int pages;
- struct virtqueue **i, *vq = malloc(sizeof(*vq));
- void *p;
-
- /* First we need some memory for this virtqueue. */
- pages = (vring_size(num_descs, LGUEST_VRING_ALIGN) + getpagesize() - 1)
- / getpagesize();
- p = get_pages(pages);
-
- /* Initialize the virtqueue */
- vq->next = NULL;
- vq->last_avail_idx = 0;
- vq->dev = dev;
-
- /*
- * This is the routine the service thread will run, and its Process ID
- * once it's running.
- */
- vq->service = service;
- vq->thread = (pid_t)-1;
-
- /* Initialize the configuration. */
- vq->config.num = num_descs;
- vq->config.irq = devices.next_irq++;
- vq->config.pfn = to_guest_phys(p) / getpagesize();
-
- /* Initialize the vring. */
- vring_init(&vq->vring, num_descs, p, LGUEST_VRING_ALIGN);
-
- /*
- * Append virtqueue to this device's descriptor. We use
- * device_config() to get the end of the device's current virtqueues;
- * we check that we haven't added any config or feature information
- * yet, otherwise we'd be overwriting them.
- */
- assert(dev->desc->config_len == 0 && dev->desc->feature_len == 0);
- memcpy(device_config(dev), &vq->config, sizeof(vq->config));
- dev->num_vq++;
- dev->desc->num_vq++;
-
- verbose("Virtqueue page %#lx\n", to_guest_phys(p));
-
- /*
- * Add to tail of list, so dev->vq is first vq, dev->vq->next is
- * second.
- */
- for (i = &dev->vq; *i; i = &(*i)->next);
- *i = vq;
-}
-
-/*
- * The first half of the feature bitmask is for us to advertise features. The
- * second half is for the Guest to accept features.
- */
-static void add_feature(struct device *dev, unsigned bit)
-{
- u8 *features = get_feature_bits(dev);
-
- /* We can't extend the feature bits once we've added config bytes */
- if (dev->desc->feature_len <= bit / CHAR_BIT) {
- assert(dev->desc->config_len == 0);
- dev->feature_len = dev->desc->feature_len = (bit/CHAR_BIT) + 1;
- }
-
- features[bit / CHAR_BIT] |= (1 << (bit % CHAR_BIT));
-}
-
-/*
- * This routine sets the configuration fields for an existing device's
- * descriptor. It only works for the last device, but that's OK because that's
- * how we use it.
- */
-static void set_config(struct device *dev, unsigned len, const void *conf)
-{
- /* Check we haven't overflowed our single page. */
- if (device_config(dev) + len > devices.descpage + getpagesize())
- errx(1, "Too many devices");
-
- /* Copy in the config information, and store the length. */
- memcpy(device_config(dev), conf, len);
- dev->desc->config_len = len;
-
- /* Size must fit in config_len field (8 bits)! */
- assert(dev->desc->config_len == len);
-}
-
-/*
- * This routine does all the creation and setup of a new device, including
- * calling new_dev_desc() to allocate the descriptor and device memory. We
- * don't actually start the service threads until later.
- *
- * See what I mean about userspace being boring?
- */
-static struct device *new_device(const char *name, u16 type)
-{
- struct device *dev = malloc(sizeof(*dev));
-
- /* Now we populate the fields one at a time. */
- dev->desc = new_dev_desc(type);
- dev->name = name;
- dev->vq = NULL;
- dev->feature_len = 0;
- dev->num_vq = 0;
- dev->running = false;
-
- /*
- * Append to device list. Prepending to a single-linked list is
- * easier, but the user expects the devices to be arranged on the bus
- * in command-line order. The first network device on the command line
- * is eth0, the first block device /dev/vda, etc.
- */
- if (devices.lastdev)
- devices.lastdev->next = dev;
- else
- devices.dev = dev;
- devices.lastdev = dev;
-
- return dev;
-}
-
-/*
- * Our first setup routine is the console. It's a fairly simple device, but
- * UNIX tty handling makes it uglier than it could be.
- */
-static void setup_console(void)
-{
- struct device *dev;
-
- /* If we can save the initial standard input settings... */
- if (tcgetattr(STDIN_FILENO, &orig_term) == 0) {
- struct termios term = orig_term;
- /*
- * Then we turn off echo, line buffering and ^C etc: We want a
- * raw input stream to the Guest.
- */
- term.c_lflag &= ~(ISIG|ICANON|ECHO);
- tcsetattr(STDIN_FILENO, TCSANOW, &term);
- }
-
- dev = new_device("console", VIRTIO_ID_CONSOLE);
-
- /* We store the console state in dev->priv, and initialize it. */
- dev->priv = malloc(sizeof(struct console_abort));
- ((struct console_abort *)dev->priv)->count = 0;
-
- /*
- * The console needs two virtqueues: the input then the output. When
- * they put something the input queue, we make sure we're listening to
- * stdin. When they put something in the output queue, we write it to
- * stdout.
- */
- add_virtqueue(dev, VIRTQUEUE_NUM, console_input);
- add_virtqueue(dev, VIRTQUEUE_NUM, console_output);
-
- verbose("device %u: console\n", ++devices.device_num);
-}
-/*:*/
-
-/*M:010
- * Inter-guest networking is an interesting area. Simplest is to have a
- * --sharenet=<name> option which opens or creates a named pipe. This can be
- * used to send packets to another guest in a 1:1 manner.
- *
- * More sopisticated is to use one of the tools developed for project like UML
- * to do networking.
- *
- * Faster is to do virtio bonding in kernel. Doing this 1:1 would be
- * completely generic ("here's my vring, attach to your vring") and would work
- * for any traffic. Of course, namespace and permissions issues need to be
- * dealt with. A more sophisticated "multi-channel" virtio_net.c could hide
- * multiple inter-guest channels behind one interface, although it would
- * require some manner of hotplugging new virtio channels.
- *
- * Finally, we could implement a virtio network switch in the kernel.
-:*/
-
-static u32 str2ip(const char *ipaddr)
-{
- unsigned int b[4];
-
- if (sscanf(ipaddr, "%u.%u.%u.%u", &b[0], &b[1], &b[2], &b[3]) != 4)
- errx(1, "Failed to parse IP address '%s'", ipaddr);
- return (b[0] << 24) | (b[1] << 16) | (b[2] << 8) | b[3];
-}
-
-static void str2mac(const char *macaddr, unsigned char mac[6])
-{
- unsigned int m[6];
- if (sscanf(macaddr, "%02x:%02x:%02x:%02x:%02x:%02x",
- &m[0], &m[1], &m[2], &m[3], &m[4], &m[5]) != 6)
- errx(1, "Failed to parse mac address '%s'", macaddr);
- mac[0] = m[0];
- mac[1] = m[1];
- mac[2] = m[2];
- mac[3] = m[3];
- mac[4] = m[4];
- mac[5] = m[5];
-}
-
-/*
- * This code is "adapted" from libbridge: it attaches the Host end of the
- * network device to the bridge device specified by the command line.
- *
- * This is yet another James Morris contribution (I'm an IP-level guy, so I
- * dislike bridging), and I just try not to break it.
- */
-static void add_to_bridge(int fd, const char *if_name, const char *br_name)
-{
- int ifidx;
- struct ifreq ifr;
-
- if (!*br_name)
- errx(1, "must specify bridge name");
-
- ifidx = if_nametoindex(if_name);
- if (!ifidx)
- errx(1, "interface %s does not exist!", if_name);
-
- strncpy(ifr.ifr_name, br_name, IFNAMSIZ);
- ifr.ifr_name[IFNAMSIZ-1] = '\0';
- ifr.ifr_ifindex = ifidx;
- if (ioctl(fd, SIOCBRADDIF, &ifr) < 0)
- err(1, "can't add %s to bridge %s", if_name, br_name);
-}
-
-/*
- * This sets up the Host end of the network device with an IP address, brings
- * it up so packets will flow, the copies the MAC address into the hwaddr
- * pointer.
- */
-static void configure_device(int fd, const char *tapif, u32 ipaddr)
-{
- struct ifreq ifr;
- struct sockaddr_in sin;
-
- memset(&ifr, 0, sizeof(ifr));
- strcpy(ifr.ifr_name, tapif);
-
- /* Don't read these incantations. Just cut & paste them like I did! */
- sin.sin_family = AF_INET;
- sin.sin_addr.s_addr = htonl(ipaddr);
- memcpy(&ifr.ifr_addr, &sin, sizeof(sin));
- if (ioctl(fd, SIOCSIFADDR, &ifr) != 0)
- err(1, "Setting %s interface address", tapif);
- ifr.ifr_flags = IFF_UP;
- if (ioctl(fd, SIOCSIFFLAGS, &ifr) != 0)
- err(1, "Bringing interface %s up", tapif);
-}
-
-static int get_tun_device(char tapif[IFNAMSIZ])
-{
- struct ifreq ifr;
- int netfd;
-
- /* Start with this zeroed. Messy but sure. */
- memset(&ifr, 0, sizeof(ifr));
-
- /*
- * We open the /dev/net/tun device and tell it we want a tap device. A
- * tap device is like a tun device, only somehow different. To tell
- * the truth, I completely blundered my way through this code, but it
- * works now!
- */
- netfd = open_or_die("/dev/net/tun", O_RDWR);
- ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_VNET_HDR;
- strcpy(ifr.ifr_name, "tap%d");
- if (ioctl(netfd, TUNSETIFF, &ifr) != 0)
- err(1, "configuring /dev/net/tun");
-
- if (ioctl(netfd, TUNSETOFFLOAD,
- TUN_F_CSUM|TUN_F_TSO4|TUN_F_TSO6|TUN_F_TSO_ECN) != 0)
- err(1, "Could not set features for tun device");
-
- /*
- * We don't need checksums calculated for packets coming in this
- * device: trust us!
- */
- ioctl(netfd, TUNSETNOCSUM, 1);
-
- memcpy(tapif, ifr.ifr_name, IFNAMSIZ);
- return netfd;
-}
-
-/*L:195
- * Our network is a Host<->Guest network. This can either use bridging or
- * routing, but the principle is the same: it uses the "tun" device to inject
- * packets into the Host as if they came in from a normal network card. We
- * just shunt packets between the Guest and the tun device.
- */
-static void setup_tun_net(char *arg)
-{
- struct device *dev;
- struct net_info *net_info = malloc(sizeof(*net_info));
- int ipfd;
- u32 ip = INADDR_ANY;
- bool bridging = false;
- char tapif[IFNAMSIZ], *p;
- struct virtio_net_config conf;
-
- net_info->tunfd = get_tun_device(tapif);
-
- /* First we create a new network device. */
- dev = new_device("net", VIRTIO_ID_NET);
- dev->priv = net_info;
-
- /* Network devices need a recv and a send queue, just like console. */
- add_virtqueue(dev, VIRTQUEUE_NUM, net_input);
- add_virtqueue(dev, VIRTQUEUE_NUM, net_output);
-
- /*
- * We need a socket to perform the magic network ioctls to bring up the
- * tap interface, connect to the bridge etc. Any socket will do!
- */
- ipfd = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
- if (ipfd < 0)
- err(1, "opening IP socket");
-
- /* If the command line was --tunnet=bridge:<name> do bridging. */
- if (!strncmp(BRIDGE_PFX, arg, strlen(BRIDGE_PFX))) {
- arg += strlen(BRIDGE_PFX);
- bridging = true;
- }
-
- /* A mac address may follow the bridge name or IP address */
- p = strchr(arg, ':');
- if (p) {
- str2mac(p+1, conf.mac);
- add_feature(dev, VIRTIO_NET_F_MAC);
- *p = '\0';
- }
-
- /* arg is now either an IP address or a bridge name */
- if (bridging)
- add_to_bridge(ipfd, tapif, arg);
- else
- ip = str2ip(arg);
-
- /* Set up the tun device. */
- configure_device(ipfd, tapif, ip);
-
- add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY);
- /* Expect Guest to handle everything except UFO */
- add_feature(dev, VIRTIO_NET_F_CSUM);
- add_feature(dev, VIRTIO_NET_F_GUEST_CSUM);
- add_feature(dev, VIRTIO_NET_F_GUEST_TSO4);
- add_feature(dev, VIRTIO_NET_F_GUEST_TSO6);
- add_feature(dev, VIRTIO_NET_F_GUEST_ECN);
- add_feature(dev, VIRTIO_NET_F_HOST_TSO4);
- add_feature(dev, VIRTIO_NET_F_HOST_TSO6);
- add_feature(dev, VIRTIO_NET_F_HOST_ECN);
- /* We handle indirect ring entries */
- add_feature(dev, VIRTIO_RING_F_INDIRECT_DESC);
- set_config(dev, sizeof(conf), &conf);
-
- /* We don't need the socket any more; setup is done. */
- close(ipfd);
-
- devices.device_num++;
-
- if (bridging)
- verbose("device %u: tun %s attached to bridge: %s\n",
- devices.device_num, tapif, arg);
- else
- verbose("device %u: tun %s: %s\n",
- devices.device_num, tapif, arg);
-}
-/*:*/
-
-/* This hangs off device->priv. */
-struct vblk_info {
- /* The size of the file. */
- off64_t len;
-
- /* The file descriptor for the file. */
- int fd;
-
-};
-
-/*L:210
- * The Disk
- *
- * The disk only has one virtqueue, so it only has one thread. It is really
- * simple: the Guest asks for a block number and we read or write that position
- * in the file.
- *
- * Before we serviced each virtqueue in a separate thread, that was unacceptably
- * slow: the Guest waits until the read is finished before running anything
- * else, even if it could have been doing useful work.
- *
- * We could have used async I/O, except it's reputed to suck so hard that
- * characters actually go missing from your code when you try to use it.
- */
-static void blk_request(struct virtqueue *vq)
-{
- struct vblk_info *vblk = vq->dev->priv;
- unsigned int head, out_num, in_num, wlen;
- int ret;
- u8 *in;
- struct virtio_blk_outhdr *out;
- struct iovec iov[vq->vring.num];
- off64_t off;
-
- /*
- * Get the next request, where we normally wait. It triggers the
- * interrupt to acknowledge previously serviced requests (if any).
- */
- head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
-
- /*
- * Every block request should contain at least one output buffer
- * (detailing the location on disk and the type of request) and one
- * input buffer (to hold the result).
- */
- if (out_num == 0 || in_num == 0)
- errx(1, "Bad virtblk cmd %u out=%u in=%u",
- head, out_num, in_num);
-
- out = convert(&iov[0], struct virtio_blk_outhdr);
- in = convert(&iov[out_num+in_num-1], u8);
- /*
- * For historical reasons, block operations are expressed in 512 byte
- * "sectors".
- */
- off = out->sector * 512;
-
- /*
- * In general the virtio block driver is allowed to try SCSI commands.
- * It'd be nice if we supported eject, for example, but we don't.
- */
- if (out->type & VIRTIO_BLK_T_SCSI_CMD) {
- fprintf(stderr, "Scsi commands unsupported\n");
- *in = VIRTIO_BLK_S_UNSUPP;
- wlen = sizeof(*in);
- } else if (out->type & VIRTIO_BLK_T_OUT) {
- /*
- * Write
- *
- * Move to the right location in the block file. This can fail
- * if they try to write past end.
- */
- if (lseek64(vblk->fd, off, SEEK_SET) != off)
- err(1, "Bad seek to sector %llu", out->sector);
-
- ret = writev(vblk->fd, iov+1, out_num-1);
- verbose("WRITE to sector %llu: %i\n", out->sector, ret);
-
- /*
- * Grr... Now we know how long the descriptor they sent was, we
- * make sure they didn't try to write over the end of the block
- * file (possibly extending it).
- */
- if (ret > 0 && off + ret > vblk->len) {
- /* Trim it back to the correct length */
- ftruncate64(vblk->fd, vblk->len);
- /* Die, bad Guest, die. */
- errx(1, "Write past end %llu+%u", off, ret);
- }
-
- wlen = sizeof(*in);
- *in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
- } else if (out->type & VIRTIO_BLK_T_FLUSH) {
- /* Flush */
- ret = fdatasync(vblk->fd);
- verbose("FLUSH fdatasync: %i\n", ret);
- wlen = sizeof(*in);
- *in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
- } else {
- /*
- * Read
- *
- * Move to the right location in the block file. This can fail
- * if they try to read past end.
- */
- if (lseek64(vblk->fd, off, SEEK_SET) != off)
- err(1, "Bad seek to sector %llu", out->sector);
-
- ret = readv(vblk->fd, iov+1, in_num-1);
- verbose("READ from sector %llu: %i\n", out->sector, ret);
- if (ret >= 0) {
- wlen = sizeof(*in) + ret;
- *in = VIRTIO_BLK_S_OK;
- } else {
- wlen = sizeof(*in);
- *in = VIRTIO_BLK_S_IOERR;
- }
- }
-
- /* Finished that request. */
- add_used(vq, head, wlen);
-}
-
-/*L:198 This actually sets up a virtual block device. */
-static void setup_block_file(const char *filename)
-{
- struct device *dev;
- struct vblk_info *vblk;
- struct virtio_blk_config conf;
-
- /* Creat the device. */
- dev = new_device("block", VIRTIO_ID_BLOCK);
-
- /* The device has one virtqueue, where the Guest places requests. */
- add_virtqueue(dev, VIRTQUEUE_NUM, blk_request);
-
- /* Allocate the room for our own bookkeeping */
- vblk = dev->priv = malloc(sizeof(*vblk));
-
- /* First we open the file and store the length. */
- vblk->fd = open_or_die(filename, O_RDWR|O_LARGEFILE);
- vblk->len = lseek64(vblk->fd, 0, SEEK_END);
-
- /* We support FLUSH. */
- add_feature(dev, VIRTIO_BLK_F_FLUSH);
-
- /* Tell Guest how many sectors this device has. */
- conf.capacity = cpu_to_le64(vblk->len / 512);
-
- /*
- * Tell Guest not to put in too many descriptors at once: two are used
- * for the in and out elements.
- */
- add_feature(dev, VIRTIO_BLK_F_SEG_MAX);
- conf.seg_max = cpu_to_le32(VIRTQUEUE_NUM - 2);
-
- /* Don't try to put whole struct: we have 8 bit limit. */
- set_config(dev, offsetof(struct virtio_blk_config, geometry), &conf);
-
- verbose("device %u: virtblock %llu sectors\n",
- ++devices.device_num, le64_to_cpu(conf.capacity));
-}
-
-/*L:211
- * Our random number generator device reads from /dev/random into the Guest's
- * input buffers. The usual case is that the Guest doesn't want random numbers
- * and so has no buffers although /dev/random is still readable, whereas
- * console is the reverse.
- *
- * The same logic applies, however.
- */
-struct rng_info {
- int rfd;
-};
-
-static void rng_input(struct virtqueue *vq)
-{
- int len;
- unsigned int head, in_num, out_num, totlen = 0;
- struct rng_info *rng_info = vq->dev->priv;
- struct iovec iov[vq->vring.num];
-
- /* First we need a buffer from the Guests's virtqueue. */
- head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
- if (out_num)
- errx(1, "Output buffers in rng?");
-
- /*
- * Just like the console write, we loop to cover the whole iovec.
- * In this case, short reads actually happen quite a bit.
- */
- while (!iov_empty(iov, in_num)) {
- len = readv(rng_info->rfd, iov, in_num);
- if (len <= 0)
- err(1, "Read from /dev/random gave %i", len);
- iov_consume(iov, in_num, len);
- totlen += len;
- }
-
- /* Tell the Guest about the new input. */
- add_used(vq, head, totlen);
-}
-
-/*L:199
- * This creates a "hardware" random number device for the Guest.
- */
-static void setup_rng(void)
-{
- struct device *dev;
- struct rng_info *rng_info = malloc(sizeof(*rng_info));
-
- /* Our device's privat info simply contains the /dev/random fd. */
- rng_info->rfd = open_or_die("/dev/random", O_RDONLY);
-
- /* Create the new device. */
- dev = new_device("rng", VIRTIO_ID_RNG);
- dev->priv = rng_info;
-
- /* The device has one virtqueue, where the Guest places inbufs. */
- add_virtqueue(dev, VIRTQUEUE_NUM, rng_input);
-
- verbose("device %u: rng\n", devices.device_num++);
-}
-/* That's the end of device setup. */
-
-/*L:230 Reboot is pretty easy: clean up and exec() the Launcher afresh. */
-static void __attribute__((noreturn)) restart_guest(void)
-{
- unsigned int i;
-
- /*
- * Since we don't track all open fds, we simply close everything beyond
- * stderr.
- */
- for (i = 3; i < FD_SETSIZE; i++)
- close(i);
-
- /* Reset all the devices (kills all threads). */
- cleanup_devices();
-
- execv(main_args[0], main_args);
- err(1, "Could not exec %s", main_args[0]);
-}
-
-/*L:220
- * Finally we reach the core of the Launcher which runs the Guest, serves
- * its input and output, and finally, lays it to rest.
- */
-static void __attribute__((noreturn)) run_guest(void)
-{
- for (;;) {
- unsigned long notify_addr;
- int readval;
-
- /* We read from the /dev/lguest device to run the Guest. */
- readval = pread(lguest_fd, ¬ify_addr,
- sizeof(notify_addr), cpu_id);
-
- /* One unsigned long means the Guest did HCALL_NOTIFY */
- if (readval == sizeof(notify_addr)) {
- verbose("Notify on address %#lx\n", notify_addr);
- handle_output(notify_addr);
- /* ENOENT means the Guest died. Reading tells us why. */
- } else if (errno == ENOENT) {
- char reason[1024] = { 0 };
- pread(lguest_fd, reason, sizeof(reason)-1, cpu_id);
- errx(1, "%s", reason);
- /* ERESTART means that we need to reboot the guest */
- } else if (errno == ERESTART) {
- restart_guest();
- /* Anything else means a bug or incompatible change. */
- } else
- err(1, "Running guest failed");
- }
-}
-/*L:240
- * This is the end of the Launcher. The good news: we are over halfway
- * through! The bad news: the most fiendish part of the code still lies ahead
- * of us.
- *
- * Are you ready? Take a deep breath and join me in the core of the Host, in
- * "make Host".
-:*/
-
-static struct option opts[] = {
- { "verbose", 0, NULL, 'v' },
- { "tunnet", 1, NULL, 't' },
- { "block", 1, NULL, 'b' },
- { "rng", 0, NULL, 'r' },
- { "initrd", 1, NULL, 'i' },
- { "username", 1, NULL, 'u' },
- { "chroot", 1, NULL, 'c' },
- { NULL },
-};
-static void usage(void)
-{
- errx(1, "Usage: lguest [--verbose] "
- "[--tunnet=(<ipaddr>:<macaddr>|bridge:<bridgename>:<macaddr>)\n"
- "|--block=<filename>|--initrd=<filename>]...\n"
- "<mem-in-mb> vmlinux [args...]");
-}
-
-/*L:105 The main routine is where the real work begins: */
-int main(int argc, char *argv[])
-{
- /* Memory, code startpoint and size of the (optional) initrd. */
- unsigned long mem = 0, start, initrd_size = 0;
- /* Two temporaries. */
- int i, c;
- /* The boot information for the Guest. */
- struct boot_params *boot;
- /* If they specify an initrd file to load. */
- const char *initrd_name = NULL;
-
- /* Password structure for initgroups/setres[gu]id */
- struct passwd *user_details = NULL;
-
- /* Directory to chroot to */
- char *chroot_path = NULL;
-
- /* Save the args: we "reboot" by execing ourselves again. */
- main_args = argv;
-
- /*
- * First we initialize the device list. We keep a pointer to the last
- * device, and the next interrupt number to use for devices (1:
- * remember that 0 is used by the timer).
- */
- devices.lastdev = NULL;
- devices.next_irq = 1;
-
- /* We're CPU 0. In fact, that's the only CPU possible right now. */
- cpu_id = 0;
-
- /*
- * We need to know how much memory so we can set up the device
- * descriptor and memory pages for the devices as we parse the command
- * line. So we quickly look through the arguments to find the amount
- * of memory now.
- */
- for (i = 1; i < argc; i++) {
- if (argv[i][0] != '-') {
- mem = atoi(argv[i]) * 1024 * 1024;
- /*
- * We start by mapping anonymous pages over all of
- * guest-physical memory range. This fills it with 0,
- * and ensures that the Guest won't be killed when it
- * tries to access it.
- */
- guest_base = map_zeroed_pages(mem / getpagesize()
- + DEVICE_PAGES);
- guest_limit = mem;
- guest_max = mem + DEVICE_PAGES*getpagesize();
- devices.descpage = get_pages(1);
- break;
- }
- }
-
- /* The options are fairly straight-forward */
- while ((c = getopt_long(argc, argv, "v", opts, NULL)) != EOF) {
- switch (c) {
- case 'v':
- verbose = true;
- break;
- case 't':
- setup_tun_net(optarg);
- break;
- case 'b':
- setup_block_file(optarg);
- break;
- case 'r':
- setup_rng();
- break;
- case 'i':
- initrd_name = optarg;
- break;
- case 'u':
- user_details = getpwnam(optarg);
- if (!user_details)
- err(1, "getpwnam failed, incorrect username?");
- break;
- case 'c':
- chroot_path = optarg;
- break;
- default:
- warnx("Unknown argument %s", argv[optind]);
- usage();
- }
- }
- /*
- * After the other arguments we expect memory and kernel image name,
- * followed by command line arguments for the kernel.
- */
- if (optind + 2 > argc)
- usage();
-
- verbose("Guest base is at %p\n", guest_base);
-
- /* We always have a console device */
- setup_console();
-
- /* Now we load the kernel */
- start = load_kernel(open_or_die(argv[optind+1], O_RDONLY));
-
- /* Boot information is stashed at physical address 0 */
- boot = from_guest_phys(0);
-
- /* Map the initrd image if requested (at top of physical memory) */
- if (initrd_name) {
- initrd_size = load_initrd(initrd_name, mem);
- /*
- * These are the location in the Linux boot header where the
- * start and size of the initrd are expected to be found.
- */
- boot->hdr.ramdisk_image = mem - initrd_size;
- boot->hdr.ramdisk_size = initrd_size;
- /* The bootloader type 0xFF means "unknown"; that's OK. */
- boot->hdr.type_of_loader = 0xFF;
- }
-
- /*
- * The Linux boot header contains an "E820" memory map: ours is a
- * simple, single region.
- */
- boot->e820_entries = 1;
- boot->e820_map[0] = ((struct e820entry) { 0, mem, E820_RAM });
- /*
- * The boot header contains a command line pointer: we put the command
- * line after the boot header.
- */
- boot->hdr.cmd_line_ptr = to_guest_phys(boot + 1);
- /* We use a simple helper to copy the arguments separated by spaces. */
- concat((char *)(boot + 1), argv+optind+2);
-
- /* Boot protocol version: 2.07 supports the fields for lguest. */
- boot->hdr.version = 0x207;
-
- /* The hardware_subarch value of "1" tells the Guest it's an lguest. */
- boot->hdr.hardware_subarch = 1;
-
- /* Tell the entry path not to try to reload segment registers. */
- boot->hdr.loadflags |= KEEP_SEGMENTS;
-
- /*
- * We tell the kernel to initialize the Guest: this returns the open
- * /dev/lguest file descriptor.
- */
- tell_kernel(start);
-
- /* Ensure that we terminate if a device-servicing child dies. */
- signal(SIGCHLD, kill_launcher);
-
- /* If we exit via err(), this kills all the threads, restores tty. */
- atexit(cleanup_devices);
-
- /* If requested, chroot to a directory */
- if (chroot_path) {
- if (chroot(chroot_path) != 0)
- err(1, "chroot(\"%s\") failed", chroot_path);
-
- if (chdir("/") != 0)
- err(1, "chdir(\"/\") failed");
-
- verbose("chroot done\n");
- }
-
- /* If requested, drop privileges */
- if (user_details) {
- uid_t u;
- gid_t g;
-
- u = user_details->pw_uid;
- g = user_details->pw_gid;
-
- if (initgroups(user_details->pw_name, g) != 0)
- err(1, "initgroups failed");
-
- if (setresgid(g, g, g) != 0)
- err(1, "setresgid failed");
-
- if (setresuid(u, u, u) != 0)
- err(1, "setresuid failed");
-
- verbose("Dropping privileges completed\n");
- }
-
- /* Finally, run the Guest. This doesn't return. */
- run_guest();
-}
-/*:*/
-
-/*M:999
- * Mastery is done: you now know everything I do.
- *
- * But surely you have seen code, features and bugs in your wanderings which
- * you now yearn to attack? That is the real game, and I look forward to you
- * patching and forking lguest into the Your-Name-Here-visor.
- *
- * Farewell, and good coding!
- * Rusty Russell.
- */
+++ /dev/null
- __
- (___()'`; Rusty's Remarkably Unreliable Guide to Lguest
- /, /` - or, A Young Coder's Illustrated Hypervisor
- \\"--\\ http://lguest.ozlabs.org
-
-Lguest is designed to be a minimal 32-bit x86 hypervisor for the Linux kernel,
-for Linux developers and users to experiment with virtualization with the
-minimum of complexity. Nonetheless, it should have sufficient features to
-make it useful for specific tasks, and, of course, you are encouraged to fork
-and enhance it (see drivers/lguest/README).
-
-Features:
-
-- Kernel module which runs in a normal kernel.
-- Simple I/O model for communication.
-- Simple program to create new guests.
-- Logo contains cute puppies: http://lguest.ozlabs.org
-
-Developer features:
-
-- Fun to hack on.
-- No ABI: being tied to a specific kernel anyway, you can change anything.
-- Many opportunities for improvement or feature implementation.
-
-Running Lguest:
-
-- The easiest way to run lguest is to use same kernel as guest and host.
- You can configure them differently, but usually it's easiest not to.
-
- You will need to configure your kernel with the following options:
-
- "General setup":
- "Prompt for development and/or incomplete code/drivers" = Y
- (CONFIG_EXPERIMENTAL=y)
-
- "Processor type and features":
- "Paravirtualized guest support" = Y
- "Lguest guest support" = Y
- "High Memory Support" = off/4GB
- "Alignment value to which kernel should be aligned" = 0x100000
- (CONFIG_PARAVIRT=y, CONFIG_LGUEST_GUEST=y, CONFIG_HIGHMEM64G=n and
- CONFIG_PHYSICAL_ALIGN=0x100000)
-
- "Device Drivers":
- "Block devices"
- "Virtio block driver (EXPERIMENTAL)" = M/Y
- "Network device support"
- "Universal TUN/TAP device driver support" = M/Y
- "Virtio network driver (EXPERIMENTAL)" = M/Y
- (CONFIG_VIRTIO_BLK=m, CONFIG_VIRTIO_NET=m and CONFIG_TUN=m)
-
- "Virtualization"
- "Linux hypervisor example code" = M/Y
- (CONFIG_LGUEST=m)
-
-- A tool called "lguest" is available in this directory: type "make"
- to build it. If you didn't build your kernel in-tree, use "make
- O=<builddir>".
-
-- Create or find a root disk image. There are several useful ones
- around, such as the xm-test tiny root image at
- http://xm-test.xensource.com/ramdisks/initrd-1.1-i386.img
-
- For more serious work, I usually use a distribution ISO image and
- install it under qemu, then make multiple copies:
-
- dd if=/dev/zero of=rootfile bs=1M count=2048
- qemu -cdrom image.iso -hda rootfile -net user -net nic -boot d
-
- Make sure that you install a getty on /dev/hvc0 if you want to log in on the
- console!
-
-- "modprobe lg" if you built it as a module.
-
-- Run an lguest as root:
-
- Documentation/lguest/lguest 64 vmlinux --tunnet=192.168.19.1 --block=rootfile root=/dev/vda
-
- Explanation:
- 64: the amount of memory to use, in MB.
-
- vmlinux: the kernel image found in the top of your build directory. You
- can also use a standard bzImage.
-
- --tunnet=192.168.19.1: configures a "tap" device for networking with this
- IP address.
-
- --block=rootfile: a file or block device which becomes /dev/vda
- inside the guest.
-
- root=/dev/vda: this (and anything else on the command line) are
- kernel boot parameters.
-
-- Configuring networking. I usually have the host masquerade, using
- "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE" and "echo 1 >
- /proc/sys/net/ipv4/ip_forward". In this example, I would configure
- eth0 inside the guest at 192.168.19.2.
-
- Another method is to bridge the tap device to an external interface
- using --tunnet=bridge:<bridgename>, and perhaps run dhcp on the guest
- to obtain an IP address. The bridge needs to be configured first:
- this option simply adds the tap interface to it.
-
- A simple example on my system:
-
- ifconfig eth0 0.0.0.0
- brctl addbr lg0
- ifconfig lg0 up
- brctl addif lg0 eth0
- dhclient lg0
-
- Then use --tunnet=bridge:lg0 when launching the guest.
-
- See:
-
- http://www.linuxfoundation.org/collaborate/workgroups/networking/bridge
-
- for general information on how to get bridging to work.
-
-- Random number generation. Using the --rng option will provide a
- /dev/hwrng in the guest that will read from the host's /dev/random.
- Use this option in conjunction with rng-tools (see ../hw_random.txt)
- to provide entropy to the guest kernel's /dev/random.
-
-There is a helpful mailing list at http://ozlabs.org/mailman/listinfo/lguest
-
-Good luck!
-Rusty Russell rusty@rustcorp.com.au.
+++ /dev/null
- User Mode Linux HOWTO
- User Mode Linux Core Team
- Mon Nov 18 14:16:16 EST 2002
-
- This document describes the use and abuse of Jeff Dike's User Mode
- Linux: a port of the Linux kernel as a normal Intel Linux process.
- ______________________________________________________________________
-
- Table of Contents
-
- 1. Introduction
-
- 1.1 How is User Mode Linux Different?
- 1.2 Why Would I Want User Mode Linux?
-
- 2. Compiling the kernel and modules
-
- 2.1 Compiling the kernel
- 2.2 Compiling and installing kernel modules
- 2.3 Compiling and installing uml_utilities
-
- 3. Running UML and logging in
-
- 3.1 Running UML
- 3.2 Logging in
- 3.3 Examples
-
- 4. UML on 2G/2G hosts
-
- 4.1 Introduction
- 4.2 The problem
- 4.3 The solution
-
- 5. Setting up serial lines and consoles
-
- 5.1 Specifying the device
- 5.2 Specifying the channel
- 5.3 Examples
-
- 6. Setting up the network
-
- 6.1 General setup
- 6.2 Userspace daemons
- 6.3 Specifying ethernet addresses
- 6.4 UML interface setup
- 6.5 Multicast
- 6.6 TUN/TAP with the uml_net helper
- 6.7 TUN/TAP with a preconfigured tap device
- 6.8 Ethertap
- 6.9 The switch daemon
- 6.10 Slip
- 6.11 Slirp
- 6.12 pcap
- 6.13 Setting up the host yourself
-
- 7. Sharing Filesystems between Virtual Machines
-
- 7.1 A warning
- 7.2 Using layered block devices
- 7.3 Note!
- 7.4 Another warning
- 7.5 uml_moo : Merging a COW file with its backing file
-
- 8. Creating filesystems
-
- 8.1 Create the filesystem file
- 8.2 Assign the file to a UML device
- 8.3 Creating and mounting the filesystem
-
- 9. Host file access
-
- 9.1 Using hostfs
- 9.2 hostfs as the root filesystem
- 9.3 Building hostfs
-
- 10. The Management Console
- 10.1 version
- 10.2 halt and reboot
- 10.3 config
- 10.4 remove
- 10.5 sysrq
- 10.6 help
- 10.7 cad
- 10.8 stop
- 10.9 go
-
- 11. Kernel debugging
-
- 11.1 Starting the kernel under gdb
- 11.2 Examining sleeping processes
- 11.3 Running ddd on UML
- 11.4 Debugging modules
- 11.5 Attaching gdb to the kernel
- 11.6 Using alternate debuggers
-
- 12. Kernel debugging examples
-
- 12.1 The case of the hung fsck
- 12.2 Episode 2: The case of the hung fsck
-
- 13. What to do when UML doesn't work
-
- 13.1 Strange compilation errors when you build from source
- 13.2 (obsolete)
- 13.3 A variety of panics and hangs with /tmp on a reiserfs filesystem
- 13.4 The compile fails with errors about conflicting types for 'open', 'dup', and 'waitpid'
- 13.5 UML doesn't work when /tmp is an NFS filesystem
- 13.6 UML hangs on boot when compiled with gprof support
- 13.7 syslogd dies with a SIGTERM on startup
- 13.8 TUN/TAP networking doesn't work on a 2.4 host
- 13.9 You can network to the host but not to other machines on the net
- 13.10 I have no root and I want to scream
- 13.11 UML build conflict between ptrace.h and ucontext.h
- 13.12 The UML BogoMips is exactly half the host's BogoMips
- 13.13 When you run UML, it immediately segfaults
- 13.14 xterms appear, then immediately disappear
- 13.15 Any other panic, hang, or strange behavior
-
- 14. Diagnosing Problems
-
- 14.1 Case 1 : Normal kernel panics
- 14.2 Case 2 : Tracing thread panics
- 14.3 Case 3 : Tracing thread panics caused by other threads
- 14.4 Case 4 : Hangs
-
- 15. Thanks
-
- 15.1 Code and Documentation
- 15.2 Flushing out bugs
- 15.3 Buglets and clean-ups
- 15.4 Case Studies
- 15.5 Other contributions
-
-
- ______________________________________________________________________
-
- 1\b1.\b. I\bIn\bnt\btr\bro\bod\bdu\buc\bct\bti\bio\bon\bn
-
- Welcome to User Mode Linux. It's going to be fun.
-
-
-
- 1\b1.\b.1\b1.\b. H\bHo\bow\bw i\bis\bs U\bUs\bse\ber\br M\bMo\bod\bde\be L\bLi\bin\bnu\bux\bx D\bDi\bif\bff\bfe\ber\bre\ben\bnt\bt?\b?
-
- Normally, the Linux Kernel talks straight to your hardware (video
- card, keyboard, hard drives, etc), and any programs which run ask the
- kernel to operate the hardware, like so:
-
-
-
- +-----------+-----------+----+
- | Process 1 | Process 2 | ...|
- +-----------+-----------+----+
- | Linux Kernel |
- +----------------------------+
- | Hardware |
- +----------------------------+
-
-
-
-
- The User Mode Linux Kernel is different; instead of talking to the
- hardware, it talks to a `real' Linux kernel (called the `host kernel'
- from now on), like any other program. Programs can then run inside
- User-Mode Linux as if they were running under a normal kernel, like
- so:
-
-
-
- +----------------+
- | Process 2 | ...|
- +-----------+----------------+
- | Process 1 | User-Mode Linux|
- +----------------------------+
- | Linux Kernel |
- +----------------------------+
- | Hardware |
- +----------------------------+
-
-
-
-
-
- 1\b1.\b.2\b2.\b. W\bWh\bhy\by W\bWo\bou\bul\bld\bd I\bI W\bWa\ban\bnt\bt U\bUs\bse\ber\br M\bMo\bod\bde\be L\bLi\bin\bnu\bux\bx?\b?
-
-
- 1. If User Mode Linux crashes, your host kernel is still fine.
-
- 2. You can run a usermode kernel as a non-root user.
-
- 3. You can debug the User Mode Linux like any normal process.
-
- 4. You can run gprof (profiling) and gcov (coverage testing).
-
- 5. You can play with your kernel without breaking things.
-
- 6. You can use it as a sandbox for testing new apps.
-
- 7. You can try new development kernels safely.
-
- 8. You can run different distributions simultaneously.
-
- 9. It's extremely fun.
-
-
-
-
-
- 2\b2.\b. C\bCo\bom\bmp\bpi\bil\bli\bin\bng\bg t\bth\bhe\be k\bke\ber\brn\bne\bel\bl a\ban\bnd\bd m\bmo\bod\bdu\bul\ble\bes\bs
-
-
-
-
- 2\b2.\b.1\b1.\b. C\bCo\bom\bmp\bpi\bil\bli\bin\bng\bg t\bth\bhe\be k\bke\ber\brn\bne\bel\bl
-
-
- Compiling the user mode kernel is just like compiling any other
- kernel. Let's go through the steps, using 2.4.0-prerelease (current
- as of this writing) as an example:
-
-
- 1. Download the latest UML patch from
-
- the download page <http://user-mode-linux.sourceforge.net/
-
- In this example, the file is uml-patch-2.4.0-prerelease.bz2.
-
-
- 2. Download the matching kernel from your favourite kernel mirror,
- such as:
-
- ftp://ftp.ca.kernel.org/pub/kernel/v2.4/linux-2.4.0-prerelease.tar.bz2
- <ftp://ftp.ca.kernel.org/pub/kernel/v2.4/linux-2.4.0-prerelease.tar.bz2>
- .
-
-
- 3. Make a directory and unpack the kernel into it.
-
-
-
- host%
- mkdir ~/uml
-
-
-
-
-
-
- host%
- cd ~/uml
-
-
-
-
-
-
- host%
- tar -xzvf linux-2.4.0-prerelease.tar.bz2
-
-
-
-
-
-
- 4. Apply the patch using
-
-
-
- host%
- cd ~/uml/linux
-
-
-
- host%
- bzcat uml-patch-2.4.0-prerelease.bz2 | patch -p1
-
-
-
-
-
-
- 5. Run your favorite config; `make xconfig ARCH=um' is the most
- convenient. `make config ARCH=um' and 'make menuconfig ARCH=um'
- will work as well. The defaults will give you a useful kernel. If
- you want to change something, go ahead, it probably won't hurt
- anything.
-
-
- Note: If the host is configured with a 2G/2G address space split
- rather than the usual 3G/1G split, then the packaged UML binaries
- will not run. They will immediately segfault. See ``UML on 2G/2G
- hosts'' for the scoop on running UML on your system.
-
-
-
- 6. Finish with `make linux ARCH=um': the result is a file called
- `linux' in the top directory of your source tree.
-
- Make sure that you don't build this kernel in /usr/src/linux. On some
- distributions, /usr/include/asm is a link into this pool. The user-
- mode build changes the other end of that link, and things that include
- <asm/anything.h> stop compiling.
-
- The sources are also available from cvs at the project's cvs page,
- which has directions on getting the sources. You can also browse the
- CVS pool from there.
-
- If you get the CVS sources, you will have to check them out into an
- empty directory. You will then have to copy each file into the
- corresponding directory in the appropriate kernel pool.
-
- If you don't have the latest kernel pool, you can get the
- corresponding user-mode sources with
-
-
- host% cvs co -r v_2_3_x linux
-
-
-
-
- where 'x' is the version in your pool. Note that you will not get the
- bug fixes and enhancements that have gone into subsequent releases.
-
-
- 2\b2.\b.2\b2.\b. C\bCo\bom\bmp\bpi\bil\bli\bin\bng\bg a\ban\bnd\bd i\bin\bns\bst\bta\bal\bll\bli\bin\bng\bg k\bke\ber\brn\bne\bel\bl m\bmo\bod\bdu\bul\ble\bes\bs
-
- UML modules are built in the same way as the native kernel (with the
- exception of the 'ARCH=um' that you always need for UML):
-
-
- host% make modules ARCH=um
-
-
-
-
- Any modules that you want to load into this kernel need to be built in
- the user-mode pool. Modules from the native kernel won't work.
-
- You can install them by using ftp or something to copy them into the
- virtual machine and dropping them into /lib/modules/`uname -r`.
-
- You can also get the kernel build process to install them as follows:
-
- 1. with the kernel not booted, mount the root filesystem in the top
- level of the kernel pool:
-
-
- host% mount root_fs mnt -o loop
-
-
-
-
-
-
- 2. run
-
-
- host%
- make modules_install INSTALL_MOD_PATH=`pwd`/mnt ARCH=um
-
-
-
-
-
-
- 3. unmount the filesystem
-
-
- host% umount mnt
-
-
-
-
-
-
- 4. boot the kernel on it
-
-
- When the system is booted, you can use insmod as usual to get the
- modules into the kernel. A number of things have been loaded into UML
- as modules, especially filesystems and network protocols and filters,
- so most symbols which need to be exported probably already are.
- However, if you do find symbols that need exporting, let us
- <http://user-mode-linux.sourceforge.net/> know, and
- they'll be "taken care of".
-
-
-
- 2\b2.\b.3\b3.\b. C\bCo\bom\bmp\bpi\bil\bli\bin\bng\bg a\ban\bnd\bd i\bin\bns\bst\bta\bal\bll\bli\bin\bng\bg u\bum\bml\bl_\b_u\but\bti\bil\bli\bit\bti\bie\bes\bs
-
- Many features of the UML kernel require a user-space helper program,
- so a uml_utilities package is distributed separately from the kernel
- patch which provides these helpers. Included within this is:
-
- +\bo port-helper - Used by consoles which connect to xterms or ports
-
- +\bo tunctl - Configuration tool to create and delete tap devices
-
- +\bo uml_net - Setuid binary for automatic tap device configuration
-
- +\bo uml_switch - User-space virtual switch required for daemon
- transport
-
- The uml_utilities tree is compiled with:
-
-
- host#
- make && make install
-
-
-
-
- Note that UML kernel patches may require a specific version of the
- uml_utilities distribution. If you don't keep up with the mailing
- lists, ensure that you have the latest release of uml_utilities if you
- are experiencing problems with your UML kernel, particularly when
- dealing with consoles or command-line switches to the helper programs
-
-
-
-
-
-
-
-
- 3\b3.\b. R\bRu\bun\bnn\bni\bin\bng\bg U\bUM\bML\bL a\ban\bnd\bd l\blo\bog\bgg\bgi\bin\bng\bg i\bin\bn
-
-
-
- 3\b3.\b.1\b1.\b. R\bRu\bun\bnn\bni\bin\bng\bg U\bUM\bML\bL
-
- It runs on 2.2.15 or later, and all 2.4 kernels.
-
-
- Booting UML is straightforward. Simply run 'linux': it will try to
- mount the file `root_fs' in the current directory. You do not need to
- run it as root. If your root filesystem is not named `root_fs', then
- you need to put a `ubd0=root_fs_whatever' switch on the linux command
- line.
-
-
- You will need a filesystem to boot UML from. There are a number
- available for download from here <http://user-mode-
- linux.sourceforge.net/> . There are also several tools
- <http://user-mode-linux.sourceforge.net/> which can be
- used to generate UML-compatible filesystem images from media.
- The kernel will boot up and present you with a login prompt.
-
-
- Note: If the host is configured with a 2G/2G address space split
- rather than the usual 3G/1G split, then the packaged UML binaries will
- not run. They will immediately segfault. See ``UML on 2G/2G hosts''
- for the scoop on running UML on your system.
-
-
-
- 3\b3.\b.2\b2.\b. L\bLo\bog\bgg\bgi\bin\bng\bg i\bin\bn
-
-
-
- The prepackaged filesystems have a root account with password 'root'
- and a user account with password 'user'. The login banner will
- generally tell you how to log in. So, you log in and you will find
- yourself inside a little virtual machine. Our filesystems have a
- variety of commands and utilities installed (and it is fairly easy to
- add more), so you will have a lot of tools with which to poke around
- the system.
-
- There are a couple of other ways to log in:
-
- +\bo On a virtual console
-
-
-
- Each virtual console that is configured (i.e. the device exists in
- /dev and /etc/inittab runs a getty on it) will come up in its own
- xterm. If you get tired of the xterms, read ``Setting up serial
- lines and consoles'' to see how to attach the consoles to
- something else, like host ptys.
-
-
-
- +\bo Over the serial line
-
-
- In the boot output, find a line that looks like:
-
-
-
- serial line 0 assigned pty /dev/ptyp1
-
-
-
-
- Attach your favorite terminal program to the corresponding tty. I.e.
- for minicom, the command would be
-
-
- host% minicom -o -p /dev/ttyp1
-
-
-
-
-
-
- +\bo Over the net
-
-
- If the network is running, then you can telnet to the virtual
- machine and log in to it. See ``Setting up the network'' to learn
- about setting up a virtual network.
-
- When you're done using it, run halt, and the kernel will bring itself
- down and the process will exit.
-
-
- 3\b3.\b.3\b3.\b. E\bEx\bxa\bam\bmp\bpl\ble\bes\bs
-
- Here are some examples of UML in action:
-
- +\bo A login session <http://user-mode-linux.sourceforge.net/login.html>
-
- +\bo A virtual network <http://user-mode-linux.sourceforge.net/net.html>
-
-
-
-
-
-
-
- 4\b4.\b. U\bUM\bML\bL o\bon\bn 2\b2G\bG/\b/2\b2G\bG h\bho\bos\bst\bts\bs
-
-
-
-
- 4\b4.\b.1\b1.\b. I\bIn\bnt\btr\bro\bod\bdu\buc\bct\bti\bio\bon\bn
-
-
- Most Linux machines are configured so that the kernel occupies the
- upper 1G (0xc0000000 - 0xffffffff) of the 4G address space and
- processes use the lower 3G (0x00000000 - 0xbfffffff). However, some
- machine are configured with a 2G/2G split, with the kernel occupying
- the upper 2G (0x80000000 - 0xffffffff) and processes using the lower
- 2G (0x00000000 - 0x7fffffff).
-
-
-
-
- 4\b4.\b.2\b2.\b. T\bTh\bhe\be p\bpr\bro\bob\bbl\ble\bem\bm
-
-
- The prebuilt UML binaries on this site will not run on 2G/2G hosts
- because UML occupies the upper .5G of the 3G process address space
- (0xa0000000 - 0xbfffffff). Obviously, on 2G/2G hosts, this is right
- in the middle of the kernel address space, so UML won't even load - it
- will immediately segfault.
-
-
-
-
- 4\b4.\b.3\b3.\b. T\bTh\bhe\be s\bso\bol\blu\but\bti\bio\bon\bn
-
-
- The fix for this is to rebuild UML from source after enabling
- CONFIG_HOST_2G_2G (under 'General Setup'). This will cause UML to
- load itself in the top .5G of that smaller process address space,
- where it will run fine. See ``Compiling the kernel and modules'' if
- you need help building UML from source.
-
-
-
-
-
-
-
-
-
-
- 5\b5.\b. S\bSe\bet\btt\bti\bin\bng\bg u\bup\bp s\bse\ber\bri\bia\bal\bl l\bli\bin\bne\bes\bs a\ban\bnd\bd c\bco\bon\bns\bso\bol\ble\bes\bs
-
-
- It is possible to attach UML serial lines and consoles to many types
- of host I/O channels by specifying them on the command line.
-
-
- You can attach them to host ptys, ttys, file descriptors, and ports.
- This allows you to do things like
-
- +\bo have a UML console appear on an unused host console,
-
- +\bo hook two virtual machines together by having one attach to a pty
- and having the other attach to the corresponding tty
-
- +\bo make a virtual machine accessible from the net by attaching a
- console to a port on the host.
-
-
- The general format of the command line option is device=channel.
-
-
-
- 5\b5.\b.1\b1.\b. S\bSp\bpe\bec\bci\bif\bfy\byi\bin\bng\bg t\bth\bhe\be d\bde\bev\bvi\bic\bce\be
-
- Devices are specified with "con" or "ssl" (console or serial line,
- respectively), optionally with a device number if you are talking
- about a specific device.
-
-
- Using just "con" or "ssl" describes all of the consoles or serial
- lines. If you want to talk about console #3 or serial line #10, they
- would be "con3" and "ssl10", respectively.
-
-
- A specific device name will override a less general "con=" or "ssl=".
- So, for example, you can assign a pty to each of the serial lines
- except for the first two like this:
-
-
- ssl=pty ssl0=tty:/dev/tty0 ssl1=tty:/dev/tty1
-
-
-
-
- The specificity of the device name is all that matters; order on the
- command line is irrelevant.
-
-
-
- 5\b5.\b.2\b2.\b. S\bSp\bpe\bec\bci\bif\bfy\byi\bin\bng\bg t\bth\bhe\be c\bch\bha\ban\bnn\bne\bel\bl
-
- There are a number of different types of channels to attach a UML
- device to, each with a different way of specifying exactly what to
- attach to.
-
- +\bo pseudo-terminals - device=pty pts terminals - device=pts
-
-
- This will cause UML to allocate a free host pseudo-terminal for the
- device. The terminal that it got will be announced in the boot
- log. You access it by attaching a terminal program to the
- corresponding tty:
-
- +\bo screen /dev/pts/n
-
- +\bo screen /dev/ttyxx
-
- +\bo minicom -o -p /dev/ttyxx - minicom seems not able to handle pts
- devices
-
- +\bo kermit - start it up, 'open' the device, then 'connect'
-
-
-
-
-
- +\bo terminals - device=tty:tty device file
-
-
- This will make UML attach the device to the specified tty (i.e
-
-
- con1=tty:/dev/tty3
-
-
-
-
- will attach UML's console 1 to the host's /dev/tty3). If the tty that
- you specify is the slave end of a tty/pty pair, something else must
- have already opened the corresponding pty in order for this to work.
-
-
-
-
-
- +\bo xterms - device=xterm
-
-
- UML will run an xterm and the device will be attached to it.
-
-
-
-
-
- +\bo Port - device=port:port number
-
-
- This will attach the UML devices to the specified host port.
- Attaching console 1 to the host's port 9000 would be done like
- this:
-
-
- con1=port:9000
-
-
-
-
- Attaching all the serial lines to that port would be done similarly:
-
-
- ssl=port:9000
-
-
-
-
- You access these devices by telnetting to that port. Each active tel-
- net session gets a different device. If there are more telnets to a
- port than UML devices attached to it, then the extra telnet sessions
- will block until an existing telnet detaches, or until another device
- becomes active (i.e. by being activated in /etc/inittab).
-
- This channel has the advantage that you can both attach multiple UML
- devices to it and know how to access them without reading the UML boot
- log. It is also unique in allowing access to a UML from remote
- machines without requiring that the UML be networked. This could be
- useful in allowing public access to UMLs because they would be
- accessible from the net, but wouldn't need any kind of network
- filtering or access control because they would have no network access.
-
-
- If you attach the main console to a portal, then the UML boot will
- appear to hang. In reality, it's waiting for a telnet to connect, at
- which point the boot will proceed.
-
-
-
-
-
- +\bo already-existing file descriptors - device=file descriptor
-
-
- If you set up a file descriptor on the UML command line, you can
- attach a UML device to it. This is most commonly used to put the
- main console back on stdin and stdout after assigning all the other
- consoles to something else:
-
-
- con0=fd:0,fd:1 con=pts
-
-
-
-
-
-
-
-
- +\bo Nothing - device=null
-
-
- This allows the device to be opened, in contrast to 'none', but
- reads will block, and writes will succeed and the data will be
- thrown out.
-
-
-
-
-
- +\bo None - device=none
-
-
- This causes the device to disappear.
-
-
-
- You can also specify different input and output channels for a device
- by putting a comma between them:
-
-
- ssl3=tty:/dev/tty2,xterm
-
-
-
-
- will cause serial line 3 to accept input on the host's /dev/tty3 and
- display output on an xterm. That's a silly example - the most common
- use of this syntax is to reattach the main console to stdin and stdout
- as shown above.
-
-
- If you decide to move the main console away from stdin/stdout, the
- initial boot output will appear in the terminal that you're running
- UML in. However, once the console driver has been officially
- initialized, then the boot output will start appearing wherever you
- specified that console 0 should be. That device will receive all
- subsequent output.
-
-
-
- 5\b5.\b.3\b3.\b. E\bEx\bxa\bam\bmp\bpl\ble\bes\bs
-
- There are a number of interesting things you can do with this
- capability.
-
-
- First, this is how you get rid of those bleeding console xterms by
- attaching them to host ptys:
-
-
- con=pty con0=fd:0,fd:1
-
-
-
-
- This will make a UML console take over an unused host virtual console,
- so that when you switch to it, you will see the UML login prompt
- rather than the host login prompt:
-
-
- con1=tty:/dev/tty6
-
-
-
-
- You can attach two virtual machines together with what amounts to a
- serial line as follows:
-
- Run one UML with a serial line attached to a pty -
-
-
- ssl1=pty
-
-
-
-
- Look at the boot log to see what pty it got (this example will assume
- that it got /dev/ptyp1).
-
- Boot the other UML with a serial line attached to the corresponding
- tty -
-
-
- ssl1=tty:/dev/ttyp1
-
-
-
-
- Log in, make sure that it has no getty on that serial line, attach a
- terminal program like minicom to it, and you should see the login
- prompt of the other virtual machine.
-
-
- 6\b6.\b. S\bSe\bet\btt\bti\bin\bng\bg u\bup\bp t\bth\bhe\be n\bne\bet\btw\bwo\bor\brk\bk
-
-
-
- This page describes how to set up the various transports and to
- provide a UML instance with network access to the host, other machines
- on the local net, and the rest of the net.
-
-
- As of 2.4.5, UML networking has been completely redone to make it much
- easier to set up, fix bugs, and add new features.
-
-
- There is a new helper, uml_net, which does the host setup that
- requires root privileges.
-
-
- There are currently five transport types available for a UML virtual
- machine to exchange packets with other hosts:
-
- +\bo ethertap
-
- +\bo TUN/TAP
-
- +\bo Multicast
-
- +\bo a switch daemon
-
- +\bo slip
-
- +\bo slirp
-
- +\bo pcap
-
- The TUN/TAP, ethertap, slip, and slirp transports allow a UML
- instance to exchange packets with the host. They may be directed
- to the host or the host may just act as a router to provide access
- to other physical or virtual machines.
-
-
- The pcap transport is a synthetic read-only interface, using the
- libpcap binary to collect packets from interfaces on the host and
- filter them. This is useful for building preconfigured traffic
- monitors or sniffers.
-
-
- The daemon and multicast transports provide a completely virtual
- network to other virtual machines. This network is completely
- disconnected from the physical network unless one of the virtual
- machines on it is acting as a gateway.
-
-
- With so many host transports, which one should you use? Here's when
- you should use each one:
-
- +\bo ethertap - if you want access to the host networking and it is
- running 2.2
-
- +\bo TUN/TAP - if you want access to the host networking and it is
- running 2.4. Also, the TUN/TAP transport is able to use a
- preconfigured device, allowing it to avoid using the setuid uml_net
- helper, which is a security advantage.
-
- +\bo Multicast - if you want a purely virtual network and you don't want
- to set up anything but the UML
-
- +\bo a switch daemon - if you want a purely virtual network and you
- don't mind running the daemon in order to get somewhat better
- performance
-
- +\bo slip - there is no particular reason to run the slip backend unless
- ethertap and TUN/TAP are just not available for some reason
-
- +\bo slirp - if you don't have root access on the host to setup
- networking, or if you don't want to allocate an IP to your UML
-
- +\bo pcap - not much use for actual network connectivity, but great for
- monitoring traffic on the host
-
- Ethertap is available on 2.4 and works fine. TUN/TAP is preferred
- to it because it has better performance and ethertap is officially
- considered obsolete in 2.4. Also, the root helper only needs to
- run occasionally for TUN/TAP, rather than handling every packet, as
- it does with ethertap. This is a slight security advantage since
- it provides fewer opportunities for a nasty UML user to somehow
- exploit the helper's root privileges.
-
-
- 6\b6.\b.1\b1.\b. G\bGe\ben\bne\ber\bra\bal\bl s\bse\bet\btu\bup\bp
-
- First, you must have the virtual network enabled in your UML. If are
- running a prebuilt kernel from this site, everything is already
- enabled. If you build the kernel yourself, under the "Network device
- support" menu, enable "Network device support", and then the three
- transports.
-
-
- The next step is to provide a network device to the virtual machine.
- This is done by describing it on the kernel command line.
-
- The general format is
-
-
- eth <n> = <transport> , <transport args>
-
-
-
-
- For example, a virtual ethernet device may be attached to a host
- ethertap device as follows:
-
-
- eth0=ethertap,tap0,fe:fd:0:0:0:1,192.168.0.254
-
-
-
-
- This sets up eth0 inside the virtual machine to attach itself to the
- host /dev/tap0, assigns it an ethernet address, and assigns the host
- tap0 interface an IP address.
-
-
-
- Note that the IP address you assign to the host end of the tap device
- must be different than the IP you assign to the eth device inside UML.
- If you are short on IPs and don't want to consume two per UML, then
- you can reuse the host's eth IP address for the host ends of the tap
- devices. Internally, the UMLs must still get unique IPs for their eth
- devices. You can also give the UMLs non-routable IPs (192.168.x.x or
- 10.x.x.x) and have the host masquerade them. This will let outgoing
- connections work, but incoming connections won't without more work,
- such as port forwarding from the host.
- Also note that when you configure the host side of an interface, it is
- only acting as a gateway. It will respond to pings sent to it
- locally, but is not useful to do that since it's a host interface.
- You are not talking to the UML when you ping that interface and get a
- response.
-
-
- You can also add devices to a UML and remove them at runtime. See the
- ``The Management Console'' page for details.
-
-
- The sections below describe this in more detail.
-
-
- Once you've decided how you're going to set up the devices, you boot
- UML, log in, configure the UML side of the devices, and set up routes
- to the outside world. At that point, you will be able to talk to any
- other machines, physical or virtual, on the net.
-
-
- If ifconfig inside UML fails and the network refuses to come up, run
- tell you what went wrong.
-
-
-
- 6\b6.\b.2\b2.\b. U\bUs\bse\ber\brs\bsp\bpa\bac\bce\be d\bda\bae\bem\bmo\bon\bns\bs
-
- You will likely need the setuid helper, or the switch daemon, or both.
- They are both installed with the RPM and deb, so if you've installed
- either, you can skip the rest of this section.
-
-
- If not, then you need to check them out of CVS, build them, and
- install them. The helper is uml_net, in CVS /tools/uml_net, and the
- daemon is uml_switch, in CVS /tools/uml_router. They are both built
- with a plain 'make'. Both need to be installed in a directory that's
- in your path - /usr/bin is recommend. On top of that, uml_net needs
- to be setuid root.
-
-
-
- 6\b6.\b.3\b3.\b. S\bSp\bpe\bec\bci\bif\bfy\byi\bin\bng\bg e\bet\bth\bhe\ber\brn\bne\bet\bt a\bad\bdd\bdr\bre\bes\bss\bse\bes\bs
-
- Below, you will see that the TUN/TAP, ethertap, and daemon interfaces
- allow you to specify hardware addresses for the virtual ethernet
- devices. This is generally not necessary. If you don't have a
- specific reason to do it, you probably shouldn't. If one is not
- specified on the command line, the driver will assign one based on the
- device IP address. It will provide the address fe:fd:nn:nn:nn:nn
- where nn.nn.nn.nn is the device IP address. This is nearly always
- sufficient to guarantee a unique hardware address for the device. A
- couple of exceptions are:
-
- +\bo Another set of virtual ethernet devices are on the same network and
- they are assigned hardware addresses using a different scheme which
- may conflict with the UML IP address-based scheme
-
- +\bo You aren't going to use the device for IP networking, so you don't
- assign the device an IP address
-
- If you let the driver provide the hardware address, you should make
- sure that the device IP address is known before the interface is
- brought up. So, inside UML, this will guarantee that:
-
-
-
- UML#
- ifconfig eth0 192.168.0.250 up
-
-
-
-
- If you decide to assign the hardware address yourself, make sure that
- the first byte of the address is even. Addresses with an odd first
- byte are broadcast addresses, which you don't want assigned to a
- device.
-
-
-
- 6\b6.\b.4\b4.\b. U\bUM\bML\bL i\bin\bnt\bte\ber\brf\bfa\bac\bce\be s\bse\bet\btu\bup\bp
-
- Once the network devices have been described on the command line, you
- should boot UML and log in.
-
-
- The first thing to do is bring the interface up:
-
-
- UML# ifconfig ethn ip-address up
-
-
-
-
- You should be able to ping the host at this point.
-
-
- To reach the rest of the world, you should set a default route to the
- host:
-
-
- UML# route add default gw host ip
-
-
-
-
- Again, with host ip of 192.168.0.4:
-
-
- UML# route add default gw 192.168.0.4
-
-
-
-
- This page used to recommend setting a network route to your local net.
- This is wrong, because it will cause UML to try to figure out hardware
- addresses of the local machines by arping on the interface to the
- host. Since that interface is basically a single strand of ethernet
- with two nodes on it (UML and the host) and arp requests don't cross
- networks, they will fail to elicit any responses. So, what you want
- is for UML to just blindly throw all packets at the host and let it
- figure out what to do with them, which is what leaving out the network
- route and adding the default route does.
-
-
- Note: If you can't communicate with other hosts on your physical
- ethernet, it's probably because of a network route that's
- automatically set up. If you run 'route -n' and see a route that
- looks like this:
-
-
-
-
- Destination Gateway Genmask Flags Metric Ref Use Iface
- 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
-
-
-
-
- with a mask that's not 255.255.255.255, then replace it with a route
- to your host:
-
-
- UML#
- route del -net 192.168.0.0 dev eth0 netmask 255.255.255.0
-
-
-
-
-
-
- UML#
- route add -host 192.168.0.4 dev eth0
-
-
-
-
- This, plus the default route to the host, will allow UML to exchange
- packets with any machine on your ethernet.
-
-
-
- 6\b6.\b.5\b5.\b. M\bMu\bul\blt\bti\bic\bca\bas\bst\bt
-
- The simplest way to set up a virtual network between multiple UMLs is
- to use the mcast transport. This was written by Harald Welte and is
- present in UML version 2.4.5-5um and later. Your system must have
- multicast enabled in the kernel and there must be a multicast-capable
- network device on the host. Normally, this is eth0, but if there is
- no ethernet card on the host, then you will likely get strange error
- messages when you bring the device up inside UML.
-
-
- To use it, run two UMLs with
-
-
- eth0=mcast
-
-
-
-
- on their command lines. Log in, configure the ethernet device in each
- machine with different IP addresses:
-
-
- UML1# ifconfig eth0 192.168.0.254
-
-
-
-
-
-
- UML2# ifconfig eth0 192.168.0.253
-
-
-
-
- and they should be able to talk to each other.
-
- The full set of command line options for this transport are
-
-
-
- ethn=mcast,ethernet address,multicast
- address,multicast port,ttl
-
-
-
-
- Harald's original README is here <http://user-mode-linux.source-
- forge.net/> and explains these in detail, as well as
- some other issues.
-
-
-
- 6\b6.\b.6\b6.\b. T\bTU\bUN\bN/\b/T\bTA\bAP\bP w\bwi\bit\bth\bh t\bth\bhe\be u\bum\bml\bl_\b_n\bne\bet\bt h\bhe\bel\blp\bpe\ber\br
-
- TUN/TAP is the preferred mechanism on 2.4 to exchange packets with the
- host. The TUN/TAP backend has been in UML since 2.4.9-3um.
-
-
- The easiest way to get up and running is to let the setuid uml_net
- helper do the host setup for you. This involves insmod-ing the tun.o
- module if necessary, configuring the device, and setting up IP
- forwarding, routing, and proxy arp. If you are new to UML networking,
- do this first. If you're concerned about the security implications of
- the setuid helper, use it to get up and running, then read the next
- section to see how to have UML use a preconfigured tap device, which
- avoids the use of uml_net.
-
-
- If you specify an IP address for the host side of the device, the
- uml_net helper will do all necessary setup on the host - the only
- requirement is that TUN/TAP be available, either built in to the host
- kernel or as the tun.o module.
-
- The format of the command line switch to attach a device to a TUN/TAP
- device is
-
-
- eth <n> =tuntap,,, <IP address>
-
-
-
-
- For example, this argument will attach the UML's eth0 to the next
- available tap device and assign an ethernet address to it based on its
- IP address
-
-
- eth0=tuntap,,,192.168.0.254
-
-
-
-
-
-
- Note that the IP address that must be used for the eth device inside
- UML is fixed by the routing and proxy arp that is set up on the
- TUN/TAP device on the host. You can use a different one, but it won't
- work because reply packets won't reach the UML. This is a feature.
- It prevents a nasty UML user from doing things like setting the UML IP
- to the same as the network's nameserver or mail server.
-
-
- There are a couple potential problems with running the TUN/TAP
- transport on a 2.4 host kernel
-
- +\bo TUN/TAP seems not to work on 2.4.3 and earlier. Upgrade the host
- kernel or use the ethertap transport.
-
- +\bo With an upgraded kernel, TUN/TAP may fail with
-
-
- File descriptor in bad state
-
-
-
-
- This is due to a header mismatch between the upgraded kernel and the
- kernel that was originally installed on the machine. The fix is to
- make sure that /usr/src/linux points to the headers for the running
- kernel.
-
- These were pointed out by Tim Robinson <timro at trkr dot net> in
- <http://www.geocrawler.com/> name="this uml-
- user post"> .
-
-
-
- 6\b6.\b.7\b7.\b. T\bTU\bUN\bN/\b/T\bTA\bAP\bP w\bwi\bit\bth\bh a\ba p\bpr\bre\bec\bco\bon\bnf\bfi\big\bgu\bur\bre\bed\bd t\bta\bap\bp d\bde\bev\bvi\bic\bce\be
-
- If you prefer not to have UML use uml_net (which is somewhat
- insecure), with UML 2.4.17-11, you can set up a TUN/TAP device
- beforehand. The setup needs to be done as root, but once that's done,
- there is no need for root assistance. Setting up the device is done
- as follows:
-
- +\bo Create the device with tunctl (available from the UML utilities
- tarball)
-
-
-
-
- host# tunctl -u uid
-
-
-
-
- where uid is the user id or username that UML will be run as. This
- will tell you what device was created.
-
- +\bo Configure the device IP (change IP addresses and device name to
- suit)
-
-
-
-
- host# ifconfig tap0 192.168.0.254 up
-
-
-
-
-
- +\bo Set up routing and arping if desired - this is my recipe, there are
- other ways of doing the same thing
-
-
- host#
- bash -c 'echo 1 > /proc/sys/net/ipv4/ip_forward'
-
- host#
- route add -host 192.168.0.253 dev tap0
-
-
-
-
-
-
- host#
- bash -c 'echo 1 > /proc/sys/net/ipv4/conf/tap0/proxy_arp'
-
-
-
-
-
-
- host#
- arp -Ds 192.168.0.253 eth0 pub
-
-
-
-
- Note that this must be done every time the host boots - this configu-
- ration is not stored across host reboots. So, it's probably a good
- idea to stick it in an rc file. An even better idea would be a little
- utility which reads the information from a config file and sets up
- devices at boot time.
-
- +\bo Rather than using up two IPs and ARPing for one of them, you can
- also provide direct access to your LAN by the UML by using a
- bridge.
-
-
- host#
- brctl addbr br0
-
-
-
-
-
-
- host#
- ifconfig eth0 0.0.0.0 promisc up
-
-
-
-
-
-
- host#
- ifconfig tap0 0.0.0.0 promisc up
-
-
-
-
-
-
- host#
- ifconfig br0 192.168.0.1 netmask 255.255.255.0 up
-
-
-
-
-
-
-
- host#
- brctl stp br0 off
-
-
-
-
-
-
- host#
- brctl setfd br0 1
-
-
-
-
-
-
- host#
- brctl sethello br0 1
-
-
-
-
-
-
- host#
- brctl addif br0 eth0
-
-
-
-
-
-
- host#
- brctl addif br0 tap0
-
-
-
-
- Note that 'br0' should be setup using ifconfig with the existing IP
- address of eth0, as eth0 no longer has its own IP.
-
- +\bo
-
-
- Also, the /dev/net/tun device must be writable by the user running
- UML in order for the UML to use the device that's been configured
- for it. The simplest thing to do is
-
-
- host# chmod 666 /dev/net/tun
-
-
-
-
- Making it world-writable looks bad, but it seems not to be
- exploitable as a security hole. However, it does allow anyone to cre-
- ate useless tap devices (useless because they can't configure them),
- which is a DOS attack. A somewhat more secure alternative would to be
- to create a group containing all the users who have preconfigured tap
- devices and chgrp /dev/net/tun to that group with mode 664 or 660.
-
-
- +\bo Once the device is set up, run UML with 'eth0=tuntap,device name'
- (i.e. 'eth0=tuntap,tap0') on the command line (or do it with the
- mconsole config command).
-
- +\bo Bring the eth device up in UML and you're in business.
-
- If you don't want that tap device any more, you can make it non-
- persistent with
-
-
- host# tunctl -d tap device
-
-
-
-
- Finally, tunctl has a -b (for brief mode) switch which causes it to
- output only the name of the tap device it created. This makes it
- suitable for capture by a script:
-
-
- host# TAP=`tunctl -u 1000 -b`
-
-
-
-
-
-
- 6\b6.\b.8\b8.\b. E\bEt\bth\bhe\ber\brt\bta\bap\bp
-
- Ethertap is the general mechanism on 2.2 for userspace processes to
- exchange packets with the kernel.
-
-
-
- To use this transport, you need to describe the virtual network device
- on the UML command line. The general format for this is
-
-
- eth <n> =ethertap, <device> , <ethernet address> , <tap IP address>
-
-
-
-
- So, the previous example
-
-
- eth0=ethertap,tap0,fe:fd:0:0:0:1,192.168.0.254
-
-
-
-
- attaches the UML eth0 device to the host /dev/tap0, assigns it the
- ethernet address fe:fd:0:0:0:1, and assigns the IP address
- 192.168.0.254 to the tap device.
-
-
-
- The tap device is mandatory, but the others are optional. If the
- ethernet address is omitted, one will be assigned to it.
-
-
- The presence of the tap IP address will cause the helper to run and do
- whatever host setup is needed to allow the virtual machine to
- communicate with the outside world. If you're not sure you know what
- you're doing, this is the way to go.
-
-
- If it is absent, then you must configure the tap device and whatever
- arping and routing you will need on the host. However, even in this
- case, the uml_net helper still needs to be in your path and it must be
- setuid root if you're not running UML as root. This is because the
- tap device doesn't support SIGIO, which UML needs in order to use
- something as a source of input. So, the helper is used as a
- convenient asynchronous IO thread.
-
- If you're using the uml_net helper, you can ignore the following host
- setup - uml_net will do it for you. You just need to make sure you
- have ethertap available, either built in to the host kernel or
- available as a module.
-
-
- If you want to set things up yourself, you need to make sure that the
- appropriate /dev entry exists. If it doesn't, become root and create
- it as follows:
-
-
- mknod /dev/tap <minor> c 36 <minor> + 16
-
-
-
-
- For example, this is how to create /dev/tap0:
-
-
- mknod /dev/tap0 c 36 0 + 16
-
-
-
-
- You also need to make sure that the host kernel has ethertap support.
- If ethertap is enabled as a module, you apparently need to insmod
- ethertap once for each ethertap device you want to enable. So,
-
-
- host#
- insmod ethertap
-
-
-
-
- will give you the tap0 interface. To get the tap1 interface, you need
- to run
-
-
- host#
- insmod ethertap unit=1 -o ethertap1
-
-
-
-
-
-
-
- 6\b6.\b.9\b9.\b. T\bTh\bhe\be s\bsw\bwi\bit\btc\bch\bh d\bda\bae\bem\bmo\bon\bn
-
- N\bNo\bot\bte\be: This is the daemon formerly known as uml_router, but which was
- renamed so the network weenies of the world would stop growling at me.
-
-
- The switch daemon, uml_switch, provides a mechanism for creating a
- totally virtual network. By default, it provides no connection to the
- host network (but see -tap, below).
-
-
- The first thing you need to do is run the daemon. Running it with no
- arguments will make it listen on a default pair of unix domain
- sockets.
-
-
- If you want it to listen on a different pair of sockets, use
-
-
- -unix control socket data socket
-
-
-
-
-
- If you want it to act as a hub rather than a switch, use
-
-
- -hub
-
-
-
-
-
- If you want the switch to be connected to host networking (allowing
- the umls to get access to the outside world through the host), use
-
-
- -tap tap0
-
-
-
-
-
- Note that the tap device must be preconfigured (see "TUN/TAP with a
- preconfigured tap device", above). If you're using a different tap
- device than tap0, specify that instead of tap0.
-
-
- uml_switch can be backgrounded as follows
-
-
- host%
- uml_switch [ options ] < /dev/null > /dev/null
-
-
-
-
- The reason it doesn't background by default is that it listens to
- stdin for EOF. When it sees that, it exits.
-
-
- The general format of the kernel command line switch is
-
-
-
- ethn=daemon,ethernet address,socket
- type,control socket,data socket
-
-
-
-
- You can leave off everything except the 'daemon'. You only need to
- specify the ethernet address if the one that will be assigned to it
- isn't acceptable for some reason. The rest of the arguments describe
- how to communicate with the daemon. You should only specify them if
- you told the daemon to use different sockets than the default. So, if
- you ran the daemon with no arguments, running the UML on the same
- machine with
- eth0=daemon
-
-
-
-
- will cause the eth0 driver to attach itself to the daemon correctly.
-
-
-
- 6\b6.\b.1\b10\b0.\b. S\bSl\bli\bip\bp
-
- Slip is another, less general, mechanism for a process to communicate
- with the host networking. In contrast to the ethertap interface,
- which exchanges ethernet frames with the host and can be used to
- transport any higher-level protocol, it can only be used to transport
- IP.
-
-
- The general format of the command line switch is
-
-
-
- ethn=slip,slip IP
-
-
-
-
- The slip IP argument is the IP address that will be assigned to the
- host end of the slip device. If it is specified, the helper will run
- and will set up the host so that the virtual machine can reach it and
- the rest of the network.
-
-
- There are some oddities with this interface that you should be aware
- of. You should only specify one slip device on a given virtual
- machine, and its name inside UML will be 'umn', not 'eth0' or whatever
- you specified on the command line. These problems will be fixed at
- some point.
-
-
-
- 6\b6.\b.1\b11\b1.\b. S\bSl\bli\bir\brp\bp
-
- slirp uses an external program, usually /usr/bin/slirp, to provide IP
- only networking connectivity through the host. This is similar to IP
- masquerading with a firewall, although the translation is performed in
- user-space, rather than by the kernel. As slirp does not set up any
- interfaces on the host, or changes routing, slirp does not require
- root access or setuid binaries on the host.
-
-
- The general format of the command line switch for slirp is:
-
-
-
- ethn=slirp,ethernet address,slirp path
-
-
-
-
- The ethernet address is optional, as UML will set up the interface
- with an ethernet address based upon the initial IP address of the
- interface. The slirp path is generally /usr/bin/slirp, although it
- will depend on distribution.
-
-
- The slirp program can have a number of options passed to the command
- line and we can't add them to the UML command line, as they will be
- parsed incorrectly. Instead, a wrapper shell script can be written or
- the options inserted into the /.slirprc file. More information on
- all of the slirp options can be found in its man pages.
-
-
- The eth0 interface on UML should be set up with the IP 10.2.0.15,
- although you can use anything as long as it is not used by a network
- you will be connecting to. The default route on UML should be set to
- use
-
-
- UML#
- route add default dev eth0
-
-
-
-
- slirp provides a number of useful IP addresses which can be used by
- UML, such as 10.0.2.3 which is an alias for the DNS server specified
- in /etc/resolv.conf on the host or the IP given in the 'dns' option
- for slirp.
-
-
- Even with a baudrate setting higher than 115200, the slirp connection
- is limited to 115200. If you need it to go faster, the slirp binary
- needs to be compiled with FULL_BOLT defined in config.h.
-
-
-
- 6\b6.\b.1\b12\b2.\b. p\bpc\bca\bap\bp
-
- The pcap transport is attached to a UML ethernet device on the command
- line or with uml_mconsole with the following syntax:
-
-
-
- ethn=pcap,host interface,filter
- expression,option1,option2
-
-
-
-
- The expression and options are optional.
-
-
- The interface is whatever network device on the host you want to
- sniff. The expression is a pcap filter expression, which is also what
- tcpdump uses, so if you know how to specify tcpdump filters, you will
- use the same expressions here. The options are up to two of
- 'promisc', control whether pcap puts the host interface into
- promiscuous mode. 'optimize' and 'nooptimize' control whether the pcap
- expression optimizer is used.
-
-
- Example:
-
-
-
- eth0=pcap,eth0,tcp
-
- eth1=pcap,eth0,!tcp
-
-
-
- will cause the UML eth0 to emit all tcp packets on the host eth0 and
- the UML eth1 to emit all non-tcp packets on the host eth0.
-
-
-
- 6\b6.\b.1\b13\b3.\b. S\bSe\bet\btt\bti\bin\bng\bg u\bup\bp t\bth\bhe\be h\bho\bos\bst\bt y\byo\bou\bur\brs\bse\bel\blf\bf
-
- If you don't specify an address for the host side of the ethertap or
- slip device, UML won't do any setup on the host. So this is what is
- needed to get things working (the examples use a host-side IP of
- 192.168.0.251 and a UML-side IP of 192.168.0.250 - adjust to suit your
- own network):
-
- +\bo The device needs to be configured with its IP address. Tap devices
- are also configured with an mtu of 1484. Slip devices are
- configured with a point-to-point address pointing at the UML ip
- address.
-
-
- host# ifconfig tap0 arp mtu 1484 192.168.0.251 up
-
-
-
-
-
-
- host#
- ifconfig sl0 192.168.0.251 pointopoint 192.168.0.250 up
-
-
-
-
-
- +\bo If a tap device is being set up, a route is set to the UML IP.
-
-
- UML# route add -host 192.168.0.250 gw 192.168.0.251
-
-
-
-
-
- +\bo To allow other hosts on your network to see the virtual machine,
- proxy arp is set up for it.
-
-
- host# arp -Ds 192.168.0.250 eth0 pub
-
-
-
-
-
- +\bo Finally, the host is set up to route packets.
-
-
- host# echo 1 > /proc/sys/net/ipv4/ip_forward
-
-
-
-
-
-
-
-
-
-
- 7\b7.\b. S\bSh\bha\bar\bri\bin\bng\bg F\bFi\bil\ble\bes\bsy\bys\bst\bte\bem\bms\bs b\bbe\bet\btw\bwe\bee\ben\bn V\bVi\bir\brt\btu\bua\bal\bl M\bMa\bac\bch\bhi\bin\bne\bes\bs
-
-
-
-
- 7\b7.\b.1\b1.\b. A\bA w\bwa\bar\brn\bni\bin\bng\bg
-
- Don't attempt to share filesystems simply by booting two UMLs from the
- same file. That's the same thing as booting two physical machines
- from a shared disk. It will result in filesystem corruption.
-
-
-
- 7\b7.\b.2\b2.\b. U\bUs\bsi\bin\bng\bg l\bla\bay\bye\ber\bre\bed\bd b\bbl\blo\boc\bck\bk d\bde\bev\bvi\bic\bce\bes\bs
-
- The way to share a filesystem between two virtual machines is to use
- the copy-on-write (COW) layering capability of the ubd block driver.
- As of 2.4.6-2um, the driver supports layering a read-write private
- device over a read-only shared device. A machine's writes are stored
- in the private device, while reads come from either device - the
- private one if the requested block is valid in it, the shared one if
- not. Using this scheme, the majority of data which is unchanged is
- shared between an arbitrary number of virtual machines, each of which
- has a much smaller file containing the changes that it has made. With
- a large number of UMLs booting from a large root filesystem, this
- leads to a huge disk space saving. It will also help performance,
- since the host will be able to cache the shared data using a much
- smaller amount of memory, so UML disk requests will be served from the
- host's memory rather than its disks.
-
-
-
-
- To add a copy-on-write layer to an existing block device file, simply
- add the name of the COW file to the appropriate ubd switch:
-
-
- ubd0=root_fs_cow,root_fs_debian_22
-
-
-
-
- where 'root_fs_cow' is the private COW file and 'root_fs_debian_22' is
- the existing shared filesystem. The COW file need not exist. If it
- doesn't, the driver will create and initialize it. Once the COW file
- has been initialized, it can be used on its own on the command line:
-
-
- ubd0=root_fs_cow
-
-
-
-
- The name of the backing file is stored in the COW file header, so it
- would be redundant to continue specifying it on the command line.
-
-
-
- 7\b7.\b.3\b3.\b. N\bNo\bot\bte\be!\b!
-
- When checking the size of the COW file in order to see the gobs of
- space that you're saving, make sure you use 'ls -ls' to see the actual
- disk consumption rather than the length of the file. The COW file is
- sparse, so the length will be very different from the disk usage.
- Here is a 'ls -l' of a COW file and backing file from one boot and
- shutdown:
- host% ls -l cow.debian debian2.2
- -rw-r--r-- 1 jdike jdike 492504064 Aug 6 21:16 cow.debian
- -rwxrw-rw- 1 jdike jdike 537919488 Aug 6 20:42 debian2.2
-
-
-
-
- Doesn't look like much saved space, does it? Well, here's 'ls -ls':
-
-
- host% ls -ls cow.debian debian2.2
- 880 -rw-r--r-- 1 jdike jdike 492504064 Aug 6 21:16 cow.debian
- 525832 -rwxrw-rw- 1 jdike jdike 537919488 Aug 6 20:42 debian2.2
-
-
-
-
- Now, you can see that the COW file has less than a meg of disk, rather
- than 492 meg.
-
-
-
- 7\b7.\b.4\b4.\b. A\bAn\bno\bot\bth\bhe\ber\br w\bwa\bar\brn\bni\bin\bng\bg
-
- Once a filesystem is being used as a readonly backing file for a COW
- file, do not boot directly from it or modify it in any way. Doing so
- will invalidate any COW files that are using it. The mtime and size
- of the backing file are stored in the COW file header at its creation,
- and they must continue to match. If they don't, the driver will
- refuse to use the COW file.
-
-
-
-
- If you attempt to evade this restriction by changing either the
- backing file or the COW header by hand, you will get a corrupted
- filesystem.
-
-
-
-
- Among other things, this means that upgrading the distribution in a
- backing file and expecting that all of the COW files using it will see
- the upgrade will not work.
-
-
-
-
- 7\b7.\b.5\b5.\b. u\bum\bml\bl_\b_m\bmo\boo\bo :\b: M\bMe\ber\brg\bgi\bin\bng\bg a\ba C\bCO\bOW\bW f\bfi\bil\ble\be w\bwi\bit\bth\bh i\bit\bts\bs b\bba\bac\bck\bki\bin\bng\bg f\bfi\bil\ble\be
-
- Depending on how you use UML and COW devices, it may be advisable to
- merge the changes in the COW file into the backing file every once in
- a while.
-
-
-
-
- The utility that does this is uml_moo. Its usage is
-
-
- host% uml_moo COW file new backing file
-
-
-
-
- There's no need to specify the backing file since that information is
- already in the COW file header. If you're paranoid, boot the new
- merged file, and if you're happy with it, move it over the old backing
- file.
-
-
-
-
- uml_moo creates a new backing file by default as a safety measure. It
- also has a destructive merge option which will merge the COW file
- directly into its current backing file. This is really only usable
- when the backing file only has one COW file associated with it. If
- there are multiple COWs associated with a backing file, a -d merge of
- one of them will invalidate all of the others. However, it is
- convenient if you're short of disk space, and it should also be
- noticeably faster than a non-destructive merge.
-
-
-
-
- uml_moo is installed with the UML deb and RPM. If you didn't install
- UML from one of those packages, you can also get it from the UML
- utilities <http://user-mode-linux.sourceforge.net/
- utilities> tar file in tools/moo.
-
-
-
-
-
-
-
-
- 8\b8.\b. C\bCr\bre\bea\bat\bti\bin\bng\bg f\bfi\bil\ble\bes\bsy\bys\bst\bte\bem\bms\bs
-
-
- You may want to create and mount new UML filesystems, either because
- your root filesystem isn't large enough or because you want to use a
- filesystem other than ext2.
-
-
- This was written on the occasion of reiserfs being included in the
- 2.4.1 kernel pool, and therefore the 2.4.1 UML, so the examples will
- talk about reiserfs. This information is generic, and the examples
- should be easy to translate to the filesystem of your choice.
-
-
- 8\b8.\b.1\b1.\b. C\bCr\bre\bea\bat\bte\be t\bth\bhe\be f\bfi\bil\ble\bes\bsy\bys\bst\bte\bem\bm f\bfi\bil\ble\be
-
- dd is your friend. All you need to do is tell dd to create an empty
- file of the appropriate size. I usually make it sparse to save time
- and to avoid allocating disk space until it's actually used. For
- example, the following command will create a sparse 100 meg file full
- of zeroes.
-
-
- host%
- dd if=/dev/zero of=new_filesystem seek=100 count=1 bs=1M
-
-
-
-
-
-
- 8\b8.\b.2\b2.\b. A\bAs\bss\bsi\big\bgn\bn t\bth\bhe\be f\bfi\bil\ble\be t\bto\bo a\ba U\bUM\bML\bL d\bde\bev\bvi\bic\bce\be
-
- Add an argument like the following to the UML command line:
-
- ubd4=new_filesystem
-
-
-
-
- making sure that you use an unassigned ubd device number.
-
-
-
- 8\b8.\b.3\b3.\b. C\bCr\bre\bea\bat\bti\bin\bng\bg a\ban\bnd\bd m\bmo\bou\bun\bnt\bti\bin\bng\bg t\bth\bhe\be f\bfi\bil\ble\bes\bsy\bys\bst\bte\bem\bm
-
- Make sure that the filesystem is available, either by being built into
- the kernel, or available as a module, then boot up UML and log in. If
- the root filesystem doesn't have the filesystem utilities (mkfs, fsck,
- etc), then get them into UML by way of the net or hostfs.
-
-
- Make the new filesystem on the device assigned to the new file:
-
-
- host# mkreiserfs /dev/ubd/4
-
-
- <----------- MKREISERFSv2 ----------->
-
- ReiserFS version 3.6.25
- Block size 4096 bytes
- Block count 25856
- Used blocks 8212
- Journal - 8192 blocks (18-8209), journal header is in block 8210
- Bitmaps: 17
- Root block 8211
- Hash function "r5"
- ATTENTION: ALL DATA WILL BE LOST ON '/dev/ubd/4'! (y/n)y
- journal size 8192 (from 18)
- Initializing journal - 0%....20%....40%....60%....80%....100%
- Syncing..done.
-
-
-
-
- Now, mount it:
-
-
- UML#
- mount /dev/ubd/4 /mnt
-
-
-
-
- and you're in business.
-
-
-
-
-
-
-
-
-
- 9\b9.\b. H\bHo\bos\bst\bt f\bfi\bil\ble\be a\bac\bcc\bce\bes\bss\bs
-
-
- If you want to access files on the host machine from inside UML, you
- can treat it as a separate machine and either nfs mount directories
- from the host or copy files into the virtual machine with scp or rcp.
- However, since UML is running on the host, it can access those
- files just like any other process and make them available inside the
- virtual machine without needing to use the network.
-
-
- This is now possible with the hostfs virtual filesystem. With it, you
- can mount a host directory into the UML filesystem and access the
- files contained in it just as you would on the host.
-
-
- 9\b9.\b.1\b1.\b. U\bUs\bsi\bin\bng\bg h\bho\bos\bst\btf\bfs\bs
-
- To begin with, make sure that hostfs is available inside the virtual
- machine with
-
-
- UML# cat /proc/filesystems
-
-
-
- . hostfs should be listed. If it's not, either rebuild the kernel
- with hostfs configured into it or make sure that hostfs is built as a
- module and available inside the virtual machine, and insmod it.
-
-
- Now all you need to do is run mount:
-
-
- UML# mount none /mnt/host -t hostfs
-
-
-
-
- will mount the host's / on the virtual machine's /mnt/host.
-
-
- If you don't want to mount the host root directory, then you can
- specify a subdirectory to mount with the -o switch to mount:
-
-
- UML# mount none /mnt/home -t hostfs -o /home
-
-
-
-
- will mount the hosts's /home on the virtual machine's /mnt/home.
-
-
-
- 9\b9.\b.2\b2.\b. h\bho\bos\bst\btf\bfs\bs a\bas\bs t\bth\bhe\be r\bro\boo\bot\bt f\bfi\bil\ble\bes\bsy\bys\bst\bte\bem\bm
-
- It's possible to boot from a directory hierarchy on the host using
- hostfs rather than using the standard filesystem in a file.
-
- To start, you need that hierarchy. The easiest way is to loop mount
- an existing root_fs file:
-
-
- host# mount root_fs uml_root_dir -o loop
-
-
-
-
- You need to change the filesystem type of / in etc/fstab to be
- 'hostfs', so that line looks like this:
-
- /dev/ubd/0 / hostfs defaults 1 1
-
-
-
-
- Then you need to chown to yourself all the files in that directory
- that are owned by root. This worked for me:
-
-
- host# find . -uid 0 -exec chown jdike {} \;
-
-
-
-
- Next, make sure that your UML kernel has hostfs compiled in, not as a
- module. Then run UML with the boot device pointing at that directory:
-
-
- ubd0=/path/to/uml/root/directory
-
-
-
-
- UML should then boot as it does normally.
-
-
- 9\b9.\b.3\b3.\b. B\bBu\bui\bil\bld\bdi\bin\bng\bg h\bho\bos\bst\btf\bfs\bs
-
- If you need to build hostfs because it's not in your kernel, you have
- two choices:
-
-
-
- +\bo Compiling hostfs into the kernel:
-
-
- Reconfigure the kernel and set the 'Host filesystem' option under
-
-
- +\bo Compiling hostfs as a module:
-
-
- Reconfigure the kernel and set the 'Host filesystem' option under
- be in arch/um/fs/hostfs/hostfs.o. Install that in
- /lib/modules/`uname -r`/fs in the virtual machine, boot it up, and
-
-
- UML# insmod hostfs
-
-
-
-
-
-
-
-
-
-
-
-
- 1\b10\b0.\b. T\bTh\bhe\be M\bMa\ban\bna\bag\bge\bem\bme\ben\bnt\bt C\bCo\bon\bns\bso\bol\ble\be
-
-
-
- The UML management console is a low-level interface to the kernel,
- somewhat like the i386 SysRq interface. Since there is a full-blown
- operating system under UML, there is much greater flexibility possible
- than with the SysRq mechanism.
-
-
- There are a number of things you can do with the mconsole interface:
-
- +\bo get the kernel version
-
- +\bo add and remove devices
-
- +\bo halt or reboot the machine
-
- +\bo Send SysRq commands
-
- +\bo Pause and resume the UML
-
-
- You need the mconsole client (uml_mconsole) which is present in CVS
- (/tools/mconsole) in 2.4.5-9um and later, and will be in the RPM in
- 2.4.6.
-
-
- You also need CONFIG_MCONSOLE (under 'General Setup') enabled in UML.
- When you boot UML, you'll see a line like:
-
-
- mconsole initialized on /home/jdike/.uml/umlNJ32yL/mconsole
-
-
-
-
- If you specify a unique machine id one the UML command line, i.e.
-
-
- umid=debian
-
-
-
-
- you'll see this
-
-
- mconsole initialized on /home/jdike/.uml/debian/mconsole
-
-
-
-
- That file is the socket that uml_mconsole will use to communicate with
- UML. Run it with either the umid or the full path as its argument:
-
-
- host% uml_mconsole debian
-
-
-
-
- or
-
-
- host% uml_mconsole /home/jdike/.uml/debian/mconsole
-
-
-
-
- You'll get a prompt, at which you can run one of these commands:
-
- +\bo version
-
- +\bo halt
-
- +\bo reboot
-
- +\bo config
-
- +\bo remove
-
- +\bo sysrq
-
- +\bo help
-
- +\bo cad
-
- +\bo stop
-
- +\bo go
-
-
- 1\b10\b0.\b.1\b1.\b. v\bve\ber\brs\bsi\bio\bon\bn
-
- This takes no arguments. It prints the UML version.
-
-
- (mconsole) version
- OK Linux usermode 2.4.5-9um #1 Wed Jun 20 22:47:08 EDT 2001 i686
-
-
-
-
- There are a couple actual uses for this. It's a simple no-op which
- can be used to check that a UML is running. It's also a way of
- sending an interrupt to the UML. This is sometimes useful on SMP
- hosts, where there's a bug which causes signals to UML to be lost,
- often causing it to appear to hang. Sending such a UML the mconsole
- version command is a good way to 'wake it up' before networking has
- been enabled, as it does not do anything to the function of the UML.
-
-
-
- 1\b10\b0.\b.2\b2.\b. h\bha\bal\blt\bt a\ban\bnd\bd r\bre\beb\bbo\boo\bot\bt
-
- These take no arguments. They shut the machine down immediately, with
- no syncing of disks and no clean shutdown of userspace. So, they are
- pretty close to crashing the machine.
-
-
- (mconsole) halt
- OK
-
-
-
-
-
-
- 1\b10\b0.\b.3\b3.\b. c\bco\bon\bnf\bfi\big\bg
-
- "config" adds a new device to the virtual machine. Currently the ubd
- and network drivers support this. It takes one argument, which is the
- device to add, with the same syntax as the kernel command line.
-
-
-
-
- (mconsole)
- config ubd3=/home/jdike/incoming/roots/root_fs_debian22
-
- OK
- (mconsole) config eth1=mcast
- OK
-
-
-
-
-
-
- 1\b10\b0.\b.4\b4.\b. r\bre\bem\bmo\bov\bve\be
-
- "remove" deletes a device from the system. Its argument is just the
- name of the device to be removed. The device must be idle in whatever
- sense the driver considers necessary. In the case of the ubd driver,
- the removed block device must not be mounted, swapped on, or otherwise
- open, and in the case of the network driver, the device must be down.
-
-
- (mconsole) remove ubd3
- OK
- (mconsole) remove eth1
- OK
-
-
-
-
-
-
- 1\b10\b0.\b.5\b5.\b. s\bsy\bys\bsr\brq\bq
-
- This takes one argument, which is a single letter. It calls the
- generic kernel's SysRq driver, which does whatever is called for by
- that argument. See the SysRq documentation in Documentation/sysrq.txt
- in your favorite kernel tree to see what letters are valid and what
- they do.
-
-
-
- 1\b10\b0.\b.6\b6.\b. h\bhe\bel\blp\bp
-
- "help" returns a string listing the valid commands and what each one
- does.
-
-
-
- 1\b10\b0.\b.7\b7.\b. c\bca\bad\bd
-
- This invokes the Ctl-Alt-Del action on init. What exactly this ends
- up doing is up to /etc/inittab. Normally, it reboots the machine.
- With UML, this is usually not desired, so if a halt would be better,
- then find the section of inittab that looks like this
-
-
- # What to do when CTRL-ALT-DEL is pressed.
- ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now
-
-
-
-
- and change the command to halt.
-
-
-
- 1\b10\b0.\b.8\b8.\b. s\bst\bto\bop\bp
-
- This puts the UML in a loop reading mconsole requests until a 'go'
- mconsole command is received. This is very useful for making backups
- of UML filesystems, as the UML can be stopped, then synced via 'sysrq
- s', so that everything is written to the filesystem. You can then copy
- the filesystem and then send the UML 'go' via mconsole.
-
-
- Note that a UML running with more than one CPU will have problems
- after you send the 'stop' command, as only one CPU will be held in a
- mconsole loop and all others will continue as normal. This is a bug,
- and will be fixed.
-
-
-
- 1\b10\b0.\b.9\b9.\b. g\bgo\bo
-
- This resumes a UML after being paused by a 'stop' command. Note that
- when the UML has resumed, TCP connections may have timed out and if
- the UML is paused for a long period of time, crond might go a little
- crazy, running all the jobs it didn't do earlier.
-
-
-
-
-
-
-
-
- 1\b11\b1.\b. K\bKe\ber\brn\bne\bel\bl d\bde\beb\bbu\bug\bgg\bgi\bin\bng\bg
-
-
- N\bNo\bot\bte\be:\b: The interface that makes debugging, as described here, possible
- is present in 2.4.0-test6 kernels and later.
-
-
- Since the user-mode kernel runs as a normal Linux process, it is
- possible to debug it with gdb almost like any other process. It is
- slightly different because the kernel's threads are already being
- ptraced for system call interception, so gdb can't ptrace them.
- However, a mechanism has been added to work around that problem.
-
-
- In order to debug the kernel, you need build it from source. See
- ``Compiling the kernel and modules'' for information on doing that.
- Make sure that you enable CONFIG_DEBUGSYM and CONFIG_PT_PROXY during
- the config. These will compile the kernel with -g, and enable the
- ptrace proxy so that gdb works with UML, respectively.
-
-
-
-
- 1\b11\b1.\b.1\b1.\b. S\bSt\bta\bar\brt\bti\bin\bng\bg t\bth\bhe\be k\bke\ber\brn\bne\bel\bl u\bun\bnd\bde\ber\br g\bgd\bdb\bb
-
- You can have the kernel running under the control of gdb from the
- beginning by putting 'debug' on the command line. You will get an
- xterm with gdb running inside it. The kernel will send some commands
- to gdb which will leave it stopped at the beginning of start_kernel.
- At this point, you can get things going with 'next', 'step', or
- 'cont'.
-
-
- There is a transcript of a debugging session here <debug-
- session.html> , with breakpoints being set in the scheduler and in an
- interrupt handler.
- 1\b11\b1.\b.2\b2.\b. E\bEx\bxa\bam\bmi\bin\bni\bin\bng\bg s\bsl\ble\bee\bep\bpi\bin\bng\bg p\bpr\bro\boc\bce\bes\bss\bse\bes\bs
-
- Not every bug is evident in the currently running process. Sometimes,
- processes hang in the kernel when they shouldn't because they've
- deadlocked on a semaphore or something similar. In this case, when
- you ^C gdb and get a backtrace, you will see the idle thread, which
- isn't very relevant.
-
-
- What you want is the stack of whatever process is sleeping when it
- shouldn't be. You need to figure out which process that is, which is
- generally fairly easy. Then you need to get its host process id,
- which you can do either by looking at ps on the host or at
- task.thread.extern_pid in gdb.
-
-
- Now what you do is this:
-
- +\bo detach from the current thread
-
-
- (UML gdb) det
-
-
-
-
-
- +\bo attach to the thread you are interested in
-
-
- (UML gdb) att <host pid>
-
-
-
-
-
- +\bo look at its stack and anything else of interest
-
-
- (UML gdb) bt
-
-
-
-
- Note that you can't do anything at this point that requires that a
- process execute, e.g. calling a function
-
- +\bo when you're done looking at that process, reattach to the current
- thread and continue it
-
-
- (UML gdb)
- att 1
-
-
-
-
-
-
- (UML gdb)
- c
-
-
-
-
- Here, specifying any pid which is not the process id of a UML thread
- will cause gdb to reattach to the current thread. I commonly use 1,
- but any other invalid pid would work.
-
-
-
- 1\b11\b1.\b.3\b3.\b. R\bRu\bun\bnn\bni\bin\bng\bg d\bdd\bdd\bd o\bon\bn U\bUM\bML\bL
-
- ddd works on UML, but requires a special kludge. The process goes
- like this:
-
- +\bo Start ddd
-
-
- host% ddd linux
-
-
-
-
-
- +\bo With ps, get the pid of the gdb that ddd started. You can ask the
- gdb to tell you, but for some reason that confuses things and
- causes a hang.
-
- +
\bo run UML with 'debug=parent gdb-pid=<pid>' added to the command line
- - it will just sit there after you hit return
-
- +\bo type 'att 1' to the ddd gdb and you will see something like
-
-
- 0xa013dc51 in __kill ()
-
-
- (gdb)
-
-
-
-
-
- +\bo At this point, type 'c', UML will boot up, and you can use ddd just
- as you do on any other process.
-
-
-
- 1\b11\b1.\b.4\b4.\b. D\bDe\beb\bbu\bug\bgg\bgi\bin\bng\bg m\bmo\bod\bdu\bul\ble\bes\bs
-
- gdb has support for debugging code which is dynamically loaded into
- the process. This support is what is needed to debug kernel modules
- under UML.
-
-
- Using that support is somewhat complicated. You have to tell gdb what
- object file you just loaded into UML and where in memory it is. Then,
- it can read the symbol table, and figure out where all the symbols are
- from the load address that you provided. It gets more interesting
- when you load the module again (i.e. after an rmmod). You have to
- tell gdb to forget about all its symbols, including the main UML ones
- for some reason, then load then all back in again.
-
-
- There's an easy way and a hard way to do this. The easy way is to use
- the umlgdb expect script written by Chandan Kudige. It basically
- automates the process for you.
-
-
- First, you must tell it where your modules are. There is a list in
- the script that looks like this:
- set MODULE_PATHS {
- "fat" "/usr/src/uml/linux-2.4.18/fs/fat/fat.o"
- "isofs" "/usr/src/uml/linux-2.4.18/fs/isofs/isofs.o"
- "minix" "/usr/src/uml/linux-2.4.18/fs/minix/minix.o"
- }
-
-
-
-
- You change that to list the names and paths of the modules that you
- are going to debug. Then you run it from the toplevel directory of
- your UML pool and it basically tells you what to do:
-
-
-
-
- ******** GDB pid is 21903 ********
- Start UML as: ./linux <kernel switches> debug gdb-pid=21903
-
-
-
- GNU gdb 5.0rh-5 Red Hat Linux 7.1
- Copyright 2001 Free Software Foundation, Inc.
- GDB is free software, covered by the GNU General Public License, and you are
- welcome to change it and/or distribute copies of it under certain conditions.
- Type "show copying" to see the conditions.
- There is absolutely no warranty for GDB. Type "show warranty" for details.
- This GDB was configured as "i386-redhat-linux"...
- (gdb) b sys_init_module
- Breakpoint 1 at 0xa0011923: file module.c, line 349.
- (gdb) att 1
-
-
-
-
- After you run UML and it sits there doing nothing, you hit return at
- the 'att 1' and continue it:
-
-
- Attaching to program: /home/jdike/linux/2.4/um/./linux, process 1
- 0xa00f4221 in __kill ()
- (UML gdb) c
- Continuing.
-
-
-
-
- At this point, you debug normally. When you insmod something, the
- expect magic will kick in and you'll see something like:
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- *** Module hostfs loaded ***
- Breakpoint 1, sys_init_module (name_user=0x805abb0 "hostfs",
- mod_user=0x8070e00) at module.c:349
- 349 char *name, *n_name, *name_tmp = NULL;
- (UML gdb) finish
- Run till exit from #0 sys_init_module (name_user=0x805abb0 "hostfs",
- mod_user=0x8070e00) at module.c:349
- 0xa00e2e23 in execute_syscall (r=0xa8140284) at syscall_kern.c:411
- 411 else res = EXECUTE_SYSCALL(syscall, regs);
- Value returned is $1 = 0
- (UML gdb)
- p/x (int)module_list + module_list->size_of_struct
-
- $2 = 0xa9021054
- (UML gdb) symbol-file ./linux
- Load new symbol table from "./linux"? (y or n) y
- Reading symbols from ./linux...
- done.
- (UML gdb)
- add-symbol-file /home/jdike/linux/2.4/um/arch/um/fs/hostfs/hostfs.o 0xa9021054
-
- add symbol table from file "/home/jdike/linux/2.4/um/arch/um/fs/hostfs/hostfs.o" at
- .text_addr = 0xa9021054
- (y or n) y
-
- Reading symbols from /home/jdike/linux/2.4/um/arch/um/fs/hostfs/hostfs.o...
- done.
- (UML gdb) p *module_list
- $1 = {size_of_struct = 84, next = 0xa0178720, name = 0xa9022de0 "hostfs",
- size = 9016, uc = {usecount = {counter = 0}, pad = 0}, flags = 1,
- nsyms = 57, ndeps = 0, syms = 0xa9023170, deps = 0x0, refs = 0x0,
- init = 0xa90221f0 <init_hostfs>, cleanup = 0xa902222c <exit_hostfs>,
- ex_table_start = 0x0, ex_table_end = 0x0, persist_start = 0x0,
- persist_end = 0x0, can_unload = 0, runsize = 0, kallsyms_start = 0x0,
- kallsyms_end = 0x0,
- archdata_start = 0x1b855 <Address 0x1b855 out of bounds>,
- archdata_end = 0xe5890000 <Address 0xe5890000 out of bounds>,
- kernel_data = 0xf689c35d <Address 0xf689c35d out of bounds>}
- >> Finished loading symbols for hostfs ...
-
-
-
-
- That's the easy way. It's highly recommended. The hard way is
- described below in case you're interested in what's going on.
-
-
- Boot the kernel under the debugger and load the module with insmod or
- modprobe. With gdb, do:
-
-
- (UML gdb) p module_list
-
-
-
-
- This is a list of modules that have been loaded into the kernel, with
- the most recently loaded module first. Normally, the module you want
- is at module_list. If it's not, walk down the next links, looking at
- the name fields until find the module you want to debug. Take the
- address of that structure, and add module.size_of_struct (which in
- 2.4.10 kernels is 96 (0x60)) to it. Gdb can make this hard addition
- for you :-):
-
-
-
- (UML gdb)
- printf "%#x\n", (int)module_list module_list->size_of_struct
-
-
-
-
- The offset from the module start occasionally changes (before 2.4.0,
- it was module.size_of_struct + 4), so it's a good idea to check the
- init and cleanup addresses once in a while, as describe below. Now
- do:
-
-
- (UML gdb)
- add-symbol-file /path/to/module/on/host that_address
-
-
-
-
- Tell gdb you really want to do it, and you're in business.
-
-
- If there's any doubt that you got the offset right, like breakpoints
- appear not to work, or they're appearing in the wrong place, you can
- check it by looking at the module structure. The init and cleanup
- fields should look like:
-
-
- init = 0x588066b0 <init_hostfs>, cleanup = 0x588066c0 <exit_hostfs>
-
-
-
-
- with no offsets on the symbol names. If the names are right, but they
- are offset, then the offset tells you how much you need to add to the
- address you gave to add-symbol-file.
-
-
- When you want to load in a new version of the module, you need to get
- gdb to forget about the old one. The only way I've found to do that
- is to tell gdb to forget about all symbols that it knows about:
-
-
- (UML gdb) symbol-file
-
-
-
-
- Then reload the symbols from the kernel binary:
-
-
- (UML gdb) symbol-file /path/to/kernel
-
-
-
-
- and repeat the process above. You'll also need to re-enable break-
- points. They were disabled when you dumped all the symbols because
- gdb couldn't figure out where they should go.
-
-
-
- 1\b11\b1.\b.5\b5.\b. A\bAt\btt\bta\bac\bch\bhi\bin\bng\bg g\bgd\bdb\bb t\bto\bo t\bth\bhe\be k\bke\ber\brn\bne\bel\bl
-
- If you don't have the kernel running under gdb, you can attach gdb to
- it later by sending the tracing thread a SIGUSR1. The first line of
- the console output identifies its pid:
- tracing thread pid = 20093
-
-
-
-
- When you send it the signal:
-
-
- host% kill -USR1 20093
-
-
-
-
- you will get an xterm with gdb running in it.
-
-
- If you have the mconsole compiled into UML, then the mconsole client
- can be used to start gdb:
-
-
- (mconsole) (mconsole) config gdb=xterm
-
-
-
-
- will fire up an xterm with gdb running in it.
-
-
-
- 1\b11\b1.\b.6\b6.\b. U\bUs\bsi\bin\bng\bg a\bal\blt\bte\ber\brn\bna\bat\bte\be d\bde\beb\bbu\bug\bgg\bge\ber\brs\bs
-
- UML has support for attaching to an already running debugger rather
- than starting gdb itself. This is present in CVS as of 17 Apr 2001.
- I sent it to Alan for inclusion in the ac tree, and it will be in my
- 2.4.4 release.
-
-
- This is useful when gdb is a subprocess of some UI, such as emacs or
- ddd. It can also be used to run debuggers other than gdb on UML.
- Below is an example of using strace as an alternate debugger.
-
-
- To do this, you need to get the pid of the debugger and pass it in
- with the
-
-
- If you are using gdb under some UI, then tell it to 'att 1', and
- you'll find yourself attached to UML.
-
-
- If you are using something other than gdb as your debugger, then
- you'll need to get it to do the equivalent of 'att 1' if it doesn't do
- it automatically.
-
-
- An example of an alternate debugger is strace. You can strace the
- actual kernel as follows:
-
- +\bo Run the following in a shell
-
-
- host%
- sh -c 'echo pid=$$; echo -n hit return; read x; exec strace -p 1 -o strace.out'
-
-
-
- +
\bo Run UML with 'debug' and 'gdb-pid=<pid>' with the pid printed out
- by the previous command
-
- +\bo Hit return in the shell, and UML will start running, and strace
- output will start accumulating in the output file.
-
- Note that this is different from running
-
-
- host% strace ./linux
-
-
-
-
- That will strace only the main UML thread, the tracing thread, which
- doesn't do any of the actual kernel work. It just oversees the vir-
- tual machine. In contrast, using strace as described above will show
- you the low-level activity of the virtual machine.
-
-
-
-
-
- 1\b12\b2.\b. K\bKe\ber\brn\bne\bel\bl d\bde\beb\bbu\bug\bgg\bgi\bin\bng\bg e\bex\bxa\bam\bmp\bpl\ble\bes\bs
-
- 1\b12\b2.\b.1\b1.\b. T\bTh\bhe\be c\bca\bas\bse\be o\bof\bf t\bth\bhe\be h\bhu\bun\bng\bg f\bfs\bsc\bck\bk
-
- When booting up the kernel, fsck failed, and dropped me into a shell
- to fix things up. I ran fsck -y, which hung:
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- Setting hostname uml [ OK ]
- Checking root filesystem
- /dev/fhd0 was not cleanly unmounted, check forced.
- Error reading block 86894 (Attempt to read block from filesystem resulted in short read) while reading indirect blocks of inode 19780.
-
- /dev/fhd0: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
- (i.e., without -a or -p options)
- [ FAILED ]
-
- *** An error occurred during the file system check.
- *** Dropping you to a shell; the system will reboot
- *** when you leave the shell.
- Give root password for maintenance
- (or type Control-D for normal startup):
-
- [root@uml /root]# fsck -y /dev/fhd0
- fsck -y /dev/fhd0
- Parallelizing fsck version 1.14 (9-Jan-1999)
- e2fsck 1.14, 9-Jan-1999 for EXT2 FS 0.5b, 95/08/09
- /dev/fhd0 contains a file system with errors, check forced.
- Pass 1: Checking inodes, blocks, and sizes
- Error reading block 86894 (Attempt to read block from filesystem resulted in short read) while reading indirect blocks of inode 19780. Ignore error? yes
-
- Inode 19780, i_blocks is 1548, should be 540. Fix? yes
-
- Pass 2: Checking directory structure
- Error reading block 49405 (Attempt to read block from filesystem resulted in short read). Ignore error? yes
-
- Directory inode 11858, block 0, offset 0: directory corrupted
- Salvage? yes
-
- Missing '.' in directory inode 11858.
- Fix? yes
-
- Missing '..' in directory inode 11858.
- Fix? yes
-
-
-
-
-
- The standard drill in this sort of situation is to fire up gdb on the
- signal thread, which, in this case, was pid 1935. In another window,
- I run gdb and attach pid 1935.
-
-
-
-
- ~/linux/2.3.26/um 1016: gdb linux
- GNU gdb 4.17.0.11 with Linux support
- Copyright 1998 Free Software Foundation, Inc.
- GDB is free software, covered by the GNU General Public License, and you are
- welcome to change it and/or distribute copies of it under certain conditions.
- Type "show copying" to see the conditions.
- There is absolutely no warranty for GDB. Type "show warranty" for details.
- This GDB was configured as "i386-redhat-linux"...
-
- (gdb) att 1935
- Attaching to program `/home/dike/linux/2.3.26/um/linux', Pid 1935
- 0x100756d9 in __wait4 ()
-
-
-
-
-
-
- Let's see what's currently running:
-
-
-
- (gdb) p current_task.pid
- $1 = 0
-
-
-
-
-
- It's the idle thread, which means that fsck went to sleep for some
- reason and never woke up.
-
-
- Let's guess that the last process in the process list is fsck:
-
-
-
- (gdb) p current_task.prev_task.comm
- $13 = "fsck.ext2\000\000\000\000\000\000"
-
-
-
-
-
- It is, so let's see what it thinks it's up to:
-
-
-
- (gdb) p current_task.prev_task.thread
- $14 = {extern_pid = 1980, tracing = 0, want_tracing = 0, forking = 0,
- kernel_stack_page = 0, signal_stack = 1342627840, syscall = {id = 4, args = {
- 3, 134973440, 1024, 0, 1024}, have_result = 0, result = 50590720},
- request = {op = 2, u = {exec = {ip = 1350467584, sp = 2952789424}, fork = {
- regs = {1350467584, 2952789424, 0 <repeats 15 times>}, sigstack = 0,
- pid = 0}, switch_to = 0x507e8000, thread = {proc = 0x507e8000,
- arg = 0xaffffdb0, flags = 0, new_pid = 0}, input_request = {
- op = 1350467584, fd = -1342177872, proc = 0, pid = 0}}}}
-
-
-
-
-
- The interesting things here are the fact that its .thread.syscall.id
- is __NR_write (see the big switch in arch/um/kernel/syscall_kern.c or
- the defines in include/asm-um/arch/unistd.h), and that it never
- returned. Also, its .request.op is OP_SWITCH (see
- arch/um/include/user_util.h). These mean that it went into a write,
- and, for some reason, called schedule().
-
-
- The fact that it never returned from write means that its stack should
- be fairly interesting. Its pid is 1980 (.thread.extern_pid). That
- process is being ptraced by the signal thread, so it must be detached
- before gdb can attach it:
-
-
-
-
-
-
-
-
-
-
- (gdb) call detach(1980)
-
- Program received signal SIGSEGV, Segmentation fault.
- <function called from gdb>
- The program being debugged stopped while in a function called from GDB.
- When the function (detach) is done executing, GDB will silently
- stop (instead of continuing to evaluate the expression containing
- the function call).
- (gdb) call detach(1980)
- $15 = 0
-
-
-
-
-
- The first detach segfaults for some reason, and the second one
- succeeds.
-
-
- Now I detach from the signal thread, attach to the fsck thread, and
- look at its stack:
-
-
- (gdb) det
- Detaching from program: /home/dike/linux/2.3.26/um/linux Pid 1935
- (gdb) att 1980
- Attaching to program `/home/dike/linux/2.3.26/um/linux', Pid 1980
- 0x10070451 in __kill ()
- (gdb) bt
- #0 0x10070451 in __kill ()
- #1 0x10068ccd in usr1_pid (pid=1980) at process.c:30
- #2 0x1006a03f in _switch_to (prev=0x50072000, next=0x507e8000)
- at process_kern.c:156
- #3 0x1006a052 in switch_to (prev=0x50072000, next=0x507e8000, last=0x50072000)
- at process_kern.c:161
- #4 0x10001d12 in schedule () at sched.c:777
- #5 0x1006a744 in __down (sem=0x507d241c) at semaphore.c:71
- #6 0x1006aa10 in __down_failed () at semaphore.c:157
- #7 0x1006c5d8 in segv_handler (sc=0x5006e940) at trap_user.c:174
- #8 0x1006c5ec in kern_segv_handler (sig=11) at trap_user.c:182
- #9 <signal handler called>
- #10 0x10155404 in errno ()
- #11 0x1006c0aa in segv (address=1342179328, is_write=2) at trap_kern.c:50
- #12 0x1006c5d8 in segv_handler (sc=0x5006eaf8) at trap_user.c:174
- #13 0x1006c5ec in kern_segv_handler (sig=11) at trap_user.c:182
- #14 <signal handler called>
- #15 0xc0fd in ?? ()
- #16 0x10016647 in sys_write (fd=3,
- buf=0x80b8800 <Address 0x80b8800 out of bounds>, count=1024)
- at read_write.c:159
- #17 0x1006d5b3 in execute_syscall (syscall=4, args=0x5006ef08)
- at syscall_kern.c:254
- #18 0x1006af87 in really_do_syscall (sig=12) at syscall_user.c:35
- #19 <signal handler called>
- #20 0x400dc8b0 in ?? ()
-
-
-
-
-
- The interesting things here are :
-
- +\bo There are two segfaults on this stack (frames 9 and 14)
-
- +\bo The first faulting address (frame 11) is 0x50000800
-
- (gdb) p (void *)1342179328
- $16 = (void *) 0x50000800
-
-
-
-
-
- The initial faulting address is interesting because it is on the idle
- thread's stack. I had been seeing the idle thread segfault for no
- apparent reason, and the cause looked like stack corruption. In hopes
- of catching the culprit in the act, I had turned off all protections
- to that stack while the idle thread wasn't running. This apparently
- tripped that trap.
-
-
- However, the more immediate problem is that second segfault and I'm
- going to concentrate on that. First, I want to see where the fault
- happened, so I have to go look at the sigcontent struct in frame 8:
-
-
-
- (gdb) up
- #1 0x10068ccd in usr1_pid (pid=1980) at process.c:30
- 30 kill(pid, SIGUSR1);
- (gdb)
- #2 0x1006a03f in _switch_to (prev=0x50072000, next=0x507e8000)
- at process_kern.c:156
- 156 usr1_pid(getpid());
- (gdb)
- #3 0x1006a052 in switch_to (prev=0x50072000, next=0x507e8000, last=0x50072000)
- at process_kern.c:161
- 161 _switch_to(prev, next);
- (gdb)
- #4 0x10001d12 in schedule () at sched.c:777
- 777 switch_to(prev, next, prev);
- (gdb)
- #5 0x1006a744 in __down (sem=0x507d241c) at semaphore.c:71
- 71 schedule();
- (gdb)
- #6 0x1006aa10 in __down_failed () at semaphore.c:157
- 157 }
- (gdb)
- #7 0x1006c5d8 in segv_handler (sc=0x5006e940) at trap_user.c:174
- 174 segv(sc->cr2, sc->err & 2);
- (gdb)
- #8 0x1006c5ec in kern_segv_handler (sig=11) at trap_user.c:182
- 182 segv_handler(sc);
- (gdb) p *sc
- Cannot access memory at address 0x0.
-
-
-
-
- That's not very useful, so I'll try a more manual method:
-
-
- (gdb) p *((struct sigcontext *) (&sig + 1))
- $19 = {gs = 0, __gsh = 0, fs = 0, __fsh = 0, es = 43, __esh = 0, ds = 43,
- __dsh = 0, edi = 1342179328, esi = 1350378548, ebp = 1342630440,
- esp = 1342630420, ebx = 1348150624, edx = 1280, ecx = 0, eax = 0,
- trapno = 14, err = 4, eip = 268480945, cs = 35, __csh = 0, eflags = 66118,
- esp_at_signal = 1342630420, ss = 43, __ssh = 0, fpstate = 0x0, oldmask = 0,
- cr2 = 1280}
-
-
-
- The ip is in handle_mm_fault:
-
-
- (gdb) p (void *)268480945
- $20 = (void *) 0x1000b1b1
- (gdb) i sym $20
- handle_mm_fault + 57 in section .text
-
-
-
-
-
- Specifically, it's in pte_alloc:
-
-
- (gdb) i line *$20
- Line 124 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h"
- starts at address 0x1000b1b1 <handle_mm_fault+57>
- and ends at 0x1000b1b7 <handle_mm_fault+63>.
-
-
-
-
-
- To find where in handle_mm_fault this is, I'll jump forward in the
- code until I see an address in that procedure:
-
-
-
- (gdb) i line *0x1000b1c0
- Line 126 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h"
- starts at address 0x1000b1b7 <handle_mm_fault+63>
- and ends at 0x1000b1c3 <handle_mm_fault+75>.
- (gdb) i line *0x1000b1d0
- Line 131 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h"
- starts at address 0x1000b1d0 <handle_mm_fault+88>
- and ends at 0x1000b1da <handle_mm_fault+98>.
- (gdb) i line *0x1000b1e0
- Line 61 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h"
- starts at address 0x1000b1da <handle_mm_fault+98>
- and ends at 0x1000b1e1 <handle_mm_fault+105>.
- (gdb) i line *0x1000b1f0
- Line 134 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h"
- starts at address 0x1000b1f0 <handle_mm_fault+120>
- and ends at 0x1000b200 <handle_mm_fault+136>.
- (gdb) i line *0x1000b200
- Line 135 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h"
- starts at address 0x1000b200 <handle_mm_fault+136>
- and ends at 0x1000b208 <handle_mm_fault+144>.
- (gdb) i line *0x1000b210
- Line 139 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h"
- starts at address 0x1000b210 <handle_mm_fault+152>
- and ends at 0x1000b219 <handle_mm_fault+161>.
- (gdb) i line *0x1000b220
- Line 1168 of "memory.c" starts at address 0x1000b21e <handle_mm_fault+166>
- and ends at 0x1000b222 <handle_mm_fault+170>.
-
-
-
-
-
- Something is apparently wrong with the page tables or vma_structs, so
- lets go back to frame 11 and have a look at them:
-
-
-
- #11 0x1006c0aa in segv (address=1342179328, is_write=2) at trap_kern.c:50
- 50 handle_mm_fault(current, vma, address, is_write);
- (gdb) call pgd_offset_proc(vma->vm_mm, address)
- $22 = (pgd_t *) 0x80a548c
-
-
-
-
-
- That's pretty bogus. Page tables aren't supposed to be in process
- text or data areas. Let's see what's in the vma:
-
-
- (gdb) p *vma
- $23 = {vm_mm = 0x507d2434, vm_start = 0, vm_end = 134512640,
- vm_next = 0x80a4f8c, vm_page_prot = {pgprot = 0}, vm_flags = 31200,
- vm_avl_height = 2058, vm_avl_left = 0x80a8c94, vm_avl_right = 0x80d1000,
- vm_next_share = 0xaffffdb0, vm_pprev_share = 0xaffffe63,
- vm_ops = 0xaffffe7a, vm_pgoff = 2952789626, vm_file = 0xafffffec,
- vm_private_data = 0x62}
- (gdb) p *vma.vm_mm
- $24 = {mmap = 0x507d2434, mmap_avl = 0x0, mmap_cache = 0x8048000,
- pgd = 0x80a4f8c, mm_users = {counter = 0}, mm_count = {counter = 134904288},
- map_count = 134909076, mmap_sem = {count = {counter = 135073792},
- sleepers = -1342177872, wait = {lock = <optimized out or zero length>,
- task_list = {next = 0xaffffe63, prev = 0xaffffe7a},
- __magic = -1342177670, __creator = -1342177300}, __magic = 98},
- page_table_lock = {}, context = 138, start_code = 0, end_code = 0,
- start_data = 0, end_data = 0, start_brk = 0, brk = 0, start_stack = 0,
- arg_start = 0, arg_end = 0, env_start = 0, env_end = 0, rss = 1350381536,
- total_vm = 0, locked_vm = 0, def_flags = 0, cpu_vm_mask = 0, swap_cnt = 0,
- swap_address = 0, segments = 0x0}
-
-
-
-
-
- This also pretty bogus. With all of the 0x80xxxxx and 0xaffffxxx
- addresses, this is looking like a stack was plonked down on top of
- these structures. Maybe it's a stack overflow from the next page:
-
-
-
- (gdb) p vma
- $25 = (struct vm_area_struct *) 0x507d2434
-
-
-
-
-
- That's towards the lower quarter of the page, so that would have to
- have been pretty heavy stack overflow:
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- (gdb) x/100x $25
- 0x507d2434: 0x507d2434 0x00000000 0x08048000 0x080a4f8c
- 0x507d2444: 0x00000000 0x080a79e0 0x080a8c94 0x080d1000
- 0x507d2454: 0xaffffdb0 0xaffffe63 0xaffffe7a 0xaffffe7a
- 0x507d2464: 0xafffffec 0x00000062 0x0000008a 0x00000000
- 0x507d2474: 0x00000000 0x00000000 0x00000000 0x00000000
- 0x507d2484: 0x00000000 0x00000000 0x00000000 0x00000000
- 0x507d2494: 0x00000000 0x00000000 0x507d2fe0 0x00000000
- 0x507d24a4: 0x00000000 0x00000000 0x00000000 0x00000000
- 0x507d24b4: 0x00000000 0x00000000 0x00000000 0x00000000
- 0x507d24c4: 0x00000000 0x00000000 0x00000000 0x00000000
- 0x507d24d4: 0x00000000 0x00000000 0x00000000 0x00000000
- 0x507d24e4: 0x00000000 0x00000000 0x00000000 0x00000000
- 0x507d24f4: 0x00000000 0x00000000 0x00000000 0x00000000
- 0x507d2504: 0x00000000 0x00000000 0x00000000 0x00000000
- 0x507d2514: 0x00000000 0x00000000 0x00000000 0x00000000
- 0x507d2524: 0x00000000 0x00000000 0x00000000 0x00000000
- 0x507d2534: 0x00000000 0x00000000 0x507d25dc 0x00000000
- 0x507d2544: 0x00000000 0x00000000 0x00000000 0x00000000
- 0x507d2554: 0x00000000 0x00000000 0x00000000 0x00000000
- 0x507d2564: 0x00000000 0x00000000 0x00000000 0x00000000
- 0x507d2574: 0x00000000 0x00000000 0x00000000 0x00000000
- 0x507d2584: 0x00000000 0x00000000 0x00000000 0x00000000
- 0x507d2594: 0x00000000 0x00000000 0x00000000 0x00000000
- 0x507d25a4: 0x00000000 0x00000000 0x00000000 0x00000000
- 0x507d25b4: 0x00000000 0x00000000 0x00000000 0x00000000
-
-
-
-
-
- It's not stack overflow. The only "stack-like" piece of this data is
- the vma_struct itself.
-
-
- At this point, I don't see any avenues to pursue, so I just have to
- admit that I have no idea what's going on. What I will do, though, is
- stick a trap on the segfault handler which will stop if it sees any
- writes to the idle thread's stack. That was the thing that happened
- first, and it may be that if I can catch it immediately, what's going
- on will be somewhat clearer.
-
-
- 1\b12\b2.\b.2\b2.\b. E\bEp\bpi\bis\bso\bod\bde\be 2\b2:\b: T\bTh\bhe\be c\bca\bas\bse\be o\bof\bf t\bth\bhe\be h\bhu\bun\bng\bg f\bfs\bsc\bck\bk
-
- After setting a trap in the SEGV handler for accesses to the signal
- thread's stack, I reran the kernel.
-
-
- fsck hung again, this time by hitting the trap:
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- Setting hostname uml [ OK ]
- Checking root filesystem
- /dev/fhd0 contains a file system with errors, check forced.
- Error reading block 86894 (Attempt to read block from filesystem resulted in short read) while reading indirect blocks of inode 19780.
-
- /dev/fhd0: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
- (i.e., without -a or -p options)
- [ FAILED ]
-
- *** An error occurred during the file system check.
- *** Dropping you to a shell; the system will reboot
- *** when you leave the shell.
- Give root password for maintenance
- (or type Control-D for normal startup):
-
- [root@uml /root]# fsck -y /dev/fhd0
- fsck -y /dev/fhd0
- Parallelizing fsck version 1.14 (9-Jan-1999)
- e2fsck 1.14, 9-Jan-1999 for EXT2 FS 0.5b, 95/08/09
- /dev/fhd0 contains a file system with errors, check forced.
- Pass 1: Checking inodes, blocks, and sizes
- Error reading block 86894 (Attempt to read block from filesystem resulted in short read) while reading indirect blocks of inode 19780. Ignore error? yes
-
- Pass 2: Checking directory structure
- Error reading block 49405 (Attempt to read block from filesystem resulted in short read). Ignore error? yes
-
- Directory inode 11858, block 0, offset 0: directory corrupted
- Salvage? yes
-
- Missing '.' in directory inode 11858.
- Fix? yes
-
- Missing '..' in directory inode 11858.
- Fix? yes
-
- Untested (4127) [100fe44c]: trap_kern.c line 31
-
-
-
-
-
- I need to get the signal thread to detach from pid 4127 so that I can
- attach to it with gdb. This is done by sending it a SIGUSR1, which is
- caught by the signal thread, which detaches the process:
-
-
- kill -USR1 4127
-
-
-
-
-
- Now I can run gdb on it:
-
-
-
-
-
-
-
-
-
-
-
-
-
- ~/linux/2.3.26/um 1034: gdb linux
- GNU gdb 4.17.0.11 with Linux support
- Copyright 1998 Free Software Foundation, Inc.
- GDB is free software, covered by the GNU General Public License, and you are
- welcome to change it and/or distribute copies of it under certain conditions.
- Type "show copying" to see the conditions.
- There is absolutely no warranty for GDB. Type "show warranty" for details.
- This GDB was configured as "i386-redhat-linux"...
- (gdb) att 4127
- Attaching to program `/home/dike/linux/2.3.26/um/linux', Pid 4127
- 0x10075891 in __libc_nanosleep ()
-
-
-
-
-
- The backtrace shows that it was in a write and that the fault address
- (address in frame 3) is 0x50000800, which is right in the middle of
- the signal thread's stack page:
-
-
- (gdb) bt
- #0 0x10075891 in __libc_nanosleep ()
- #1 0x1007584d in __sleep (seconds=1000000)
- at ../sysdeps/unix/sysv/linux/sleep.c:78
- #2 0x1006ce9a in stop () at user_util.c:191
- #3 0x1006bf88 in segv (address=1342179328, is_write=2) at trap_kern.c:31
- #4 0x1006c628 in segv_handler (sc=0x5006eaf8) at trap_user.c:174
- #5 0x1006c63c in kern_segv_handler (sig=11) at trap_user.c:182
- #6 <signal handler called>
- #7 0xc0fd in ?? ()
- #8 0x10016647 in sys_write (fd=3, buf=0x80b8800 "R.", count=1024)
- at read_write.c:159
- #9 0x1006d603 in execute_syscall (syscall=4, args=0x5006ef08)
- at syscall_kern.c:254
- #10 0x1006af87 in really_do_syscall (sig=12) at syscall_user.c:35
- #11 <signal handler called>
- #12 0x400dc8b0 in ?? ()
- #13 <signal handler called>
- #14 0x400dc8b0 in ?? ()
- #15 0x80545fd in ?? ()
- #16 0x804daae in ?? ()
- #17 0x8054334 in ?? ()
- #18 0x804d23e in ?? ()
- #19 0x8049632 in ?? ()
- #20 0x80491d2 in ?? ()
- #21 0x80596b5 in ?? ()
- (gdb) p (void *)1342179328
- $3 = (void *) 0x50000800
-
-
-
-
-
- Going up the stack to the segv_handler frame and looking at where in
- the code the access happened shows that it happened near line 110 of
- block_dev.c:
-
-
-
-
-
-
-
-
-
- (gdb) up
- #1 0x1007584d in __sleep (seconds=1000000)
- at ../sysdeps/unix/sysv/linux/sleep.c:78
- ../sysdeps/unix/sysv/linux/sleep.c:78: No such file or directory.
- (gdb)
- #2 0x1006ce9a in stop () at user_util.c:191
- 191 while(1) sleep(1000000);
- (gdb)
- #3 0x1006bf88 in segv (address=1342179328, is_write=2) at trap_kern.c:31
- 31 KERN_UNTESTED();
- (gdb)
- #4 0x1006c628 in segv_handler (sc=0x5006eaf8) at trap_user.c:174
- 174 segv(sc->cr2, sc->err & 2);
- (gdb) p *sc
- $1 = {gs = 0, __gsh = 0, fs = 0, __fsh = 0, es = 43, __esh = 0, ds = 43,
- __dsh = 0, edi = 1342179328, esi = 134973440, ebp = 1342631484,
- esp = 1342630864, ebx = 256, edx = 0, ecx = 256, eax = 1024, trapno = 14,
- err = 6, eip = 268550834, cs = 35, __csh = 0, eflags = 66070,
- esp_at_signal = 1342630864, ss = 43, __ssh = 0, fpstate = 0x0, oldmask = 0,
- cr2 = 1342179328}
- (gdb) p (void *)268550834
- $2 = (void *) 0x1001c2b2
- (gdb) i sym $2
- block_write + 1090 in section .text
- (gdb) i line *$2
- Line 209 of "/home/dike/linux/2.3.26/um/include/asm/arch/string.h"
- starts at address 0x1001c2a1 <block_write+1073>
- and ends at 0x1001c2bf <block_write+1103>.
- (gdb) i line *0x1001c2c0
- Line 110 of "block_dev.c" starts at address 0x1001c2bf <block_write+1103>
- and ends at 0x1001c2e3 <block_write+1139>.
-
-
-
-
-
- Looking at the source shows that the fault happened during a call to
- copy_to_user to copy the data into the kernel:
-
-
- 107 count -= chars;
- 108 copy_from_user(p,buf,chars);
- 109 p += chars;
- 110 buf += chars;
-
-
-
-
-
- p is the pointer which must contain 0x50000800, since buf contains
- 0x80b8800 (frame 8 above). It is defined as:
-
-
- p = offset + bh->b_data;
-
-
-
-
-
- I need to figure out what bh is, and it just so happens that bh is
- passed as an argument to mark_buffer_uptodate and mark_buffer_dirty a
- few lines later, so I do a little disassembly:
-
-
-
-
- (gdb) disas 0x1001c2bf 0x1001c2e0
- Dump of assembler code from 0x1001c2bf to 0x1001c2d0:
- 0x1001c2bf <block_write+1103>: addl %eax,0xc(%ebp)
- 0x1001c2c2 <block_write+1106>: movl 0xfffffdd4(%ebp),%edx
- 0x1001c2c8 <block_write+1112>: btsl $0x0,0x18(%edx)
- 0x1001c2cd <block_write+1117>: btsl $0x1,0x18(%edx)
- 0x1001c2d2 <block_write+1122>: sbbl %ecx,%ecx
- 0x1001c2d4 <block_write+1124>: testl %ecx,%ecx
- 0x1001c2d6 <block_write+1126>: jne 0x1001c2e3 <block_write+1139>
- 0x1001c2d8 <block_write+1128>: pushl $0x0
- 0x1001c2da <block_write+1130>: pushl %edx
- 0x1001c2db <block_write+1131>: call 0x1001819c <__mark_buffer_dirty>
- End of assembler dump.
-
-
-
-
-
- At that point, bh is in %edx (address 0x1001c2da), which is calculated
- at 0x1001c2c2 as %ebp + 0xfffffdd4, so I figure exactly what that is,
- taking %ebp from the sigcontext_struct above:
-
-
- (gdb) p (void *)1342631484
- $5 = (void *) 0x5006ee3c
- (gdb) p 0x5006ee3c+0xfffffdd4
- $6 = 1342630928
- (gdb) p (void *)$6
- $7 = (void *) 0x5006ec10
- (gdb) p *((void **)$7)
- $8 = (void *) 0x50100200
-
-
-
-
-
- Now, I look at the structure to see what's in it, and particularly,
- what its b_data field contains:
-
-
- (gdb) p *((struct buffer_head *)0x50100200)
- $13 = {b_next = 0x50289380, b_blocknr = 49405, b_size = 1024, b_list = 0,
- b_dev = 15872, b_count = {counter = 1}, b_rdev = 15872, b_state = 24,
- b_flushtime = 0, b_next_free = 0x501001a0, b_prev_free = 0x50100260,
- b_this_page = 0x501001a0, b_reqnext = 0x0, b_pprev = 0x507fcf58,
- b_data = 0x50000800 "", b_page = 0x50004000,
- b_end_io = 0x10017f60 <end_buffer_io_sync>, b_dev_id = 0x0,
- b_rsector = 98810, b_wait = {lock = <optimized out or zero length>,
- task_list = {next = 0x50100248, prev = 0x50100248}, __magic = 1343226448,
- __creator = 0}, b_kiobuf = 0x0}
-
-
-
-
-
- The b_data field is indeed 0x50000800, so the question becomes how
- that happened. The rest of the structure looks fine, so this probably
- is not a case of data corruption. It happened on purpose somehow.
-
-
- The b_page field is a pointer to the page_struct representing the
- 0x50000000 page. Looking at it shows the kernel's idea of the state
- of that page:
-
-
-
- (gdb) p *$13.b_page
- $17 = {list = {next = 0x50004a5c, prev = 0x100c5174}, mapping = 0x0,
- index = 0, next_hash = 0x0, count = {counter = 1}, flags = 132, lru = {
- next = 0x50008460, prev = 0x50019350}, wait = {
- lock = <optimized out or zero length>, task_list = {next = 0x50004024,
- prev = 0x50004024}, __magic = 1342193708, __creator = 0},
- pprev_hash = 0x0, buffers = 0x501002c0, virtual = 1342177280,
- zone = 0x100c5160}
-
-
-
-
-
- Some sanity-checking: the virtual field shows the "virtual" address of
- this page, which in this kernel is the same as its "physical" address,
- and the page_struct itself should be mem_map[0], since it represents
- the first page of memory:
-
-
-
- (gdb) p (void *)1342177280
- $18 = (void *) 0x50000000
- (gdb) p mem_map
- $19 = (mem_map_t *) 0x50004000
-
-
-
-
-
- These check out fine.
-
-
- Now to check out the page_struct itself. In particular, the flags
- field shows whether the page is considered free or not:
-
-
- (gdb) p (void *)132
- $21 = (void *) 0x84
-
-
-
-
-
- The "reserved" bit is the high bit, which is definitely not set, so
- the kernel considers the signal stack page to be free and available to
- be used.
-
-
- At this point, I jump to conclusions and start looking at my early
- boot code, because that's where that page is supposed to be reserved.
-
-
- In my setup_arch procedure, I have the following code which looks just
- fine:
-
-
-
- bootmap_size = init_bootmem(start_pfn, end_pfn - start_pfn);
- free_bootmem(__pa(low_physmem) + bootmap_size, high_physmem - low_physmem);
-
-
-
-
-
- Two stack pages have already been allocated, and low_physmem points to
- the third page, which is the beginning of free memory.
- The init_bootmem call declares the entire memory to the boot memory
- manager, which marks it all reserved. The free_bootmem call frees up
- all of it, except for the first two pages. This looks correct to me.
-
-
- So, I decide to see init_bootmem run and make sure that it is marking
- those first two pages as reserved. I never get that far.
-
-
- Stepping into init_bootmem, and looking at bootmem_map before looking
- at what it contains shows the following:
-
-
-
- (gdb) p bootmem_map
- $3 = (void *) 0x50000000
-
-
-
-
-
- Aha! The light dawns. That first page is doing double duty as a
- stack and as the boot memory map. The last thing that the boot memory
- manager does is to free the pages used by its memory map, so this page
- is getting freed even its marked as reserved.
-
-
- The fix was to initialize the boot memory manager before allocating
- those two stack pages, and then allocate them through the boot memory
- manager. After doing this, and fixing a couple of subsequent buglets,
- the stack corruption problem disappeared.
-
-
-
-
-
- 1\b13\b3.\b. W\bWh\bha\bat\bt t\bto\bo d\bdo\bo w\bwh\bhe\ben\bn U\bUM\bML\bL d\bdo\boe\bes\bsn\bn'\b't\bt w\bwo\bor\brk\bk
-
-
-
-
- 1\b13\b3.\b.1\b1.\b. S\bSt\btr\bra\ban\bng\bge\be c\bco\bom\bmp\bpi\bil\bla\bat\bti\bio\bon\bn e\ber\brr\bro\bor\brs\bs w\bwh\bhe\ben\bn y\byo\bou\bu b\bbu\bui\bil\bld\bd f\bfr\bro\bom\bm s\bso\bou\bur\brc\bce\be
-
- As of test11, it is necessary to have "ARCH=um" in the environment or
- on the make command line for all steps in building UML, including
- clean, distclean, or mrproper, config, menuconfig, or xconfig, dep,
- and linux. If you forget for any of them, the i386 build seems to
- contaminate the UML build. If this happens, start from scratch with
-
-
- host%
- make mrproper ARCH=um
-
-
-
-
- and repeat the build process with ARCH=um on all the steps.
-
-
- See ``Compiling the kernel and modules'' for more details.
-
-
- Another cause of strange compilation errors is building UML in
- /usr/src/linux. If you do this, the first thing you need to do is
- clean up the mess you made. The /usr/src/linux/asm link will now
- point to /usr/src/linux/asm-um. Make it point back to
- /usr/src/linux/asm-i386. Then, move your UML pool someplace else and
- build it there. Also see below, where a more specific set of symptoms
- is described.
-
-
-
- 1\b13\b3.\b.3\b3.\b. A\bA v\bva\bar\bri\bie\bet\bty\by o\bof\bf p\bpa\ban\bni\bic\bcs\bs a\ban\bnd\bd h\bha\ban\bng\bgs\bs w\bwi\bit\bth\bh /\b/t\btm\bmp\bp o\bon\bn a\ba r\bre\bei\bis\bse\ber\brf\bfs\bs f\bfi\bil\ble\bes\bsy\bys\bs-\b-
- t\bte\bem\bm
-
- I saw this on reiserfs 3.5.21 and it seems to be fixed in 3.5.27.
- Panics preceded by
-
-
- Detaching pid nnnn
-
-
-
- are diagnostic of this problem. This is a reiserfs bug which causes a
- thread to occasionally read stale data from a mmapped page shared with
- another thread. The fix is to upgrade the filesystem or to have /tmp
- be an ext2 filesystem.
-
-
-
- 1\b13\b3.\b.4\b4.\b. T\bTh\bhe\be c\bco\bom\bmp\bpi\bil\ble\be f\bfa\bai\bil\bls\bs w\bwi\bit\bth\bh e\ber\brr\bro\bor\brs\bs a\bab\bbo\bou\but\bt c\bco\bon\bnf\bfl\bli\bic\bct\bti\bin\bng\bg t\bty\byp\bpe\bes\bs f\bfo\bor\br
- '\b'o\bop\bpe\ben\bn'\b',\b, '\b'd\bdu\bup\bp'\b',\b, a\ban\bnd\bd '\b'w\bwa\bai\bit\btp\bpi\bid\bd'\b'
-
- This happens when you build in /usr/src/linux. The UML build makes
- the include/asm link point to include/asm-um. /usr/include/asm points
- to /usr/src/linux/include/asm, so when that link gets moved, files
- which need to include the asm-i386 versions of headers get the
- incompatible asm-um versions. The fix is to move the include/asm link
- back to include/asm-i386 and to do UML builds someplace else.
-
-
-
- 1\b13\b3.\b.5\b5.\b. U\bUM\bML\bL d\bdo\boe\bes\bsn\bn'\b't\bt w\bwo\bor\brk\bk w\bwh\bhe\ben\bn /\b/t\btm\bmp\bp i\bis\bs a\ban\bn N\bNF\bFS\bS f\bfi\bil\ble\bes\bsy\bys\bst\bte\bem\bm
-
- This seems to be a similar situation with the ReiserFS problem above.
- Some versions of NFS seems not to handle mmap correctly, which UML
- depends on. The workaround is have /tmp be a non-NFS directory.
-
-
- 1\b13\b3.\b.6\b6.\b. U\bUM\bML\bL h\bha\ban\bng\bgs\bs o\bon\bn b\bbo\boo\bot\bt w\bwh\bhe\ben\bn c\bco\bom\bmp\bpi\bil\ble\bed\bd w\bwi\bit\bth\bh g\bgp\bpr\bro\bof\bf s\bsu\bup\bpp\bpo\bor\brt\bt
-
- If you build UML with gprof support and, early in the boot, it does
- this
-
-
- kernel BUG at page_alloc.c:100!
-
-
-
-
- you have a buggy gcc. You can work around the problem by removing
- UM_FASTCALL from CFLAGS in arch/um/Makefile-i386. This will open up
- another bug, but that one is fairly hard to reproduce.
-
-
-
- 1\b13\b3.\b.7\b7.\b. s\bsy\bys\bsl\blo\bog\bgd\bd d\bdi\bie\bes\bs w\bwi\bit\bth\bh a\ba S\bSI\bIG\bGT\bTE\bER\bRM\bM o\bon\bn s\bst\bta\bar\brt\btu\bup\bp
-
- The exact boot error depends on the distribution that you're booting,
- but Debian produces this:
-
-
- /etc/rc2.d/S10sysklogd: line 49: 93 Terminated
- start-stop-daemon --start --quiet --exec /sbin/syslogd -- $SYSLOGD
-
-
-
-
- This is a syslogd bug. There's a race between a parent process
- installing a signal handler and its child sending the signal. See
- this uml-devel post <http://www.geocrawler.com/lists/3/Source-
- Forge/709/0/6612801> for the details.
-
-
-
- 1\b13\b3.\b.8\b8.\b. T\bTU\bUN\bN/\b/T\bTA\bAP\bP n\bne\bet\btw\bwo\bor\brk\bki\bin\bng\bg d\bdo\boe\bes\bsn\bn'\b't\bt w\bwo\bor\brk\bk o\bon\bn a\ba 2\b2.\b.4\b4 h\bho\bos\bst\bt
-
- There are a couple of problems which were
- <http://www.geocrawler.com/lists/3/SourceForge/597/0/> name="pointed
- out"> by Tim Robinson <timro at trkr dot net>
-
- +\bo It doesn't work on hosts running 2.4.7 (or thereabouts) or earlier.
- The fix is to upgrade to something more recent and then read the
- next item.
-
- +\bo If you see
-
-
- File descriptor in bad state
-
-
-
- when you bring up the device inside UML, you have a header mismatch
- between the original kernel and the upgraded one. Make /usr/src/linux
- point at the new headers. This will only be a problem if you build
- uml_net yourself.
-
-
-
- 1\b13\b3.\b.9\b9.\b. Y\bYo\bou\bu c\bca\ban\bn n\bne\bet\btw\bwo\bor\brk\bk t\bto\bo t\bth\bhe\be h\bho\bos\bst\bt b\bbu\but\bt n\bno\bot\bt t\bto\bo o\bot\bth\bhe\ber\br m\bma\bac\bch\bhi\bin\bne\bes\bs o\bon\bn t\bth\bhe\be
- n\bne\bet\bt
-
- If you can connect to the host, and the host can connect to UML, but
- you cannot connect to any other machines, then you may need to enable
- IP Masquerading on the host. Usually this is only experienced when
- using private IP addresses (192.168.x.x or 10.x.x.x) for host/UML
- networking, rather than the public address space that your host is
- connected to. UML does not enable IP Masquerading, so you will need
- to create a static rule to enable it:
-
-
- host%
- iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
-
-
-
-
- Replace eth0 with the interface that you use to talk to the rest of
- the world.
-
-
- Documentation on IP Masquerading, and SNAT, can be found at
- www.netfilter.org <http://www.netfilter.org> .
-
-
- If you can reach the local net, but not the outside Internet, then
- that is usually a routing problem. The UML needs a default route:
-
-
- UML#
- route add default gw gateway IP
-
-
-
-
- The gateway IP can be any machine on the local net that knows how to
- reach the outside world. Usually, this is the host or the local net-
- work's gateway.
-
-
- Occasionally, we hear from someone who can reach some machines, but
- not others on the same net, or who can reach some ports on other
- machines, but not others. These are usually caused by strange
- firewalling somewhere between the UML and the other box. You track
- this down by running tcpdump on every interface the packets travel
- over and see where they disappear. When you find a machine that takes
- the packets in, but does not send them onward, that's the culprit.
-
-
-
- 1\b13\b3.\b.1\b10\b0.\b. I\bI h\bha\bav\bve\be n\bno\bo r\bro\boo\bot\bt a\ban\bnd\bd I\bI w\bwa\ban\bnt\bt t\bto\bo s\bsc\bcr\bre\bea\bam\bm
-
- Thanks to Birgit Wahlich for telling me about this strange one. It
- turns out that there's a limit of six environment variables on the
- kernel command line. When that limit is reached or exceeded, argument
- processing stops, which means that the 'root=' argument that UML
- usually adds is not seen. So, the filesystem has no idea what the
- root device is, so it panics.
-
-
- The fix is to put less stuff on the command line. Glomming all your
- setup variables into one is probably the best way to go.
-
-
-
- 1\b13\b3.\b.1\b11\b1.\b. U\bUM\bML\bL b\bbu\bui\bil\bld\bd c\bco\bon\bnf\bfl\bli\bic\bct\bt b\bbe\bet\btw\bwe\bee\ben\bn p\bpt\btr\bra\bac\bce\be.\b.h\bh a\ban\bnd\bd u\buc\bco\bon\bnt\bte\bex\bxt\bt.\b.h\bh
-
- On some older systems, /usr/include/asm/ptrace.h and
- /usr/include/sys/ucontext.h define the same names. So, when they're
- included together, the defines from one completely mess up the parsing
- of the other, producing errors like:
- /usr/include/sys/ucontext.h:47: parse error before
- `10'
-
-
-
-
- plus a pile of warnings.
-
-
- This is a libc botch, which has since been fixed, and I don't see any
- way around it besides upgrading.
-
-
-
- 1\b13\b3.\b.1\b12\b2.\b. T\bTh\bhe\be U\bUM\bML\bL B\bBo\bog\bgo\boM\bMi\bip\bps\bs i\bis\bs e\bex\bxa\bac\bct\btl\bly\by h\bha\bal\blf\bf t\bth\bhe\be h\bho\bos\bst\bt'\b's\bs B\bBo\bog\bgo\boM\bMi\bip\bps\bs
-
- On i386 kernels, there are two ways of running the loop that is used
- to calculate the BogoMips rating, using the TSC if it's there or using
- a one-instruction loop. The TSC produces twice the BogoMips as the
- loop. UML uses the loop, since it has nothing resembling a TSC, and
- will get almost exactly the same BogoMips as a host using the loop.
- However, on a host with a TSC, its BogoMips will be double the loop
- BogoMips, and therefore double the UML BogoMips.
-
-
-
- 1\b13\b3.\b.1\b13\b3.\b. W\bWh\bhe\ben\bn y\byo\bou\bu r\bru\bun\bn U\bUM\bML\bL,\b, i\bit\bt i\bim\bmm\bme\bed\bdi\bia\bat\bte\bel\bly\by s\bse\beg\bgf\bfa\bau\bul\blt\bts\bs
-
- If the host is configured with the 2G/2G address space split, that's
- why. See ``UML on 2G/2G hosts'' for the details on getting UML to
- run on your host.
-
-
-
- 1\b13\b3.\b.1\b14\b4.\b. x\bxt\bte\ber\brm\bms\bs a\bap\bpp\bpe\bea\bar\br,\b, t\bth\bhe\ben\bn i\bim\bmm\bme\bed\bdi\bia\bat\bte\bel\bly\by d\bdi\bis\bsa\bap\bpp\bpe\bea\bar\br
-
- If you're running an up to date kernel with an old release of
- uml_utilities, the port-helper program will not work properly, so
- xterms will exit straight after they appear. The solution is to
- upgrade to the latest release of uml_utilities. Usually this problem
- occurs when you have installed a packaged release of UML then compiled
- your own development kernel without upgrading the uml_utilities from
- the source distribution.
-
-
-
- 1\b13\b3.\b.1\b15\b5.\b. A\bAn\bny\by o\bot\bth\bhe\ber\br p\bpa\ban\bni\bic\bc,\b, h\bha\ban\bng\bg,\b, o\bor\br s\bst\btr\bra\ban\bng\bge\be b\bbe\beh\bha\bav\bvi\bio\bor\br
-
- If you're seeing truly strange behavior, such as hangs or panics that
- happen in random places, or you try running the debugger to see what's
- happening and it acts strangely, then it could be a problem in the
- host kernel. If you're not running a stock Linus or -ac kernel, then
- try that. An early version of the preemption patch and a 2.4.10 SuSE
- kernel have caused very strange problems in UML.
-
-
- Otherwise, let me know about it. Send a message to one of the UML
- mailing lists - either the developer list - user-mode-linux-devel at
- lists dot sourceforge dot net (subscription info) or the user list -
- user-mode-linux-user at lists dot sourceforge do net (subscription
- info), whichever you prefer. Don't assume that everyone knows about
- it and that a fix is imminent.
-
-
- If you want to be super-helpful, read ``Diagnosing Problems'' and
- follow the instructions contained therein.
- 1\b14\b4.\b. D\bDi\bia\bag\bgn\bno\bos\bsi\bin\bng\bg P\bPr\bro\bob\bbl\ble\bem\bms\bs
-
-
- If you get UML to crash, hang, or otherwise misbehave, you should
- report this on one of the project mailing lists, either the developer
- list - user-mode-linux-devel at lists dot sourceforge dot net
- (subscription info) or the user list - user-mode-linux-user at lists
- dot sourceforge dot net (subscription info). When you do, it is
- likely that I will want more information. So, it would be helpful to
- read the stuff below, do whatever is applicable in your case, and
- report the results to the list.
-
-
- For any diagnosis, you're going to need to build a debugging kernel.
- The binaries from this site aren't debuggable. If you haven't done
- this before, read about ``Compiling the kernel and modules'' and
- ``Kernel debugging'' UML first.
-
-
- 1\b14\b4.\b.1\b1.\b. C\bCa\bas\bse\be 1\b1 :\b: N\bNo\bor\brm\bma\bal\bl k\bke\ber\brn\bne\bel\bl p\bpa\ban\bni\bic\bcs\bs
-
- The most common case is for a normal thread to panic. To debug this,
- you will need to run it under the debugger (add 'debug' to the command
- line). An xterm will start up with gdb running inside it. Continue
- it when it stops in start_kernel and make it crash. Now ^C gdb and
-
-
- If the panic was a "Kernel mode fault", then there will be a segv
- frame on the stack and I'm going to want some more information. The
- stack might look something like this:
-
-
- (UML gdb) backtrace
- #0 0x1009bf76 in __sigprocmask (how=1, set=0x5f347940, oset=0x0)
- at ../sysdeps/unix/sysv/linux/sigprocmask.c:49
- #1 0x10091411 in change_sig (signal=10, on=1) at process.c:218
- #2 0x10094785 in timer_handler (sig=26) at time_kern.c:32
- #3 0x1009bf38 in __restore ()
- at ../sysdeps/unix/sysv/linux/i386/sigaction.c:125
- #4 0x1009534c in segv (address=8, ip=268849158, is_write=2, is_user=0)
- at trap_kern.c:66
- #5 0x10095c04 in segv_handler (sig=11) at trap_user.c:285
- #6 0x1009bf38 in __restore ()
-
-
-
-
- I'm going to want to see the symbol and line information for the value
- of ip in the segv frame. In this case, you would do the following:
-
-
- (UML gdb) i sym 268849158
-
-
-
-
- and
-
-
- (UML gdb) i line *268849158
-
-
-
-
- The reason for this is the __restore frame right above the segv_han-
- dler frame is hiding the frame that actually segfaulted. So, I have
- to get that information from the faulting ip.
-
-
- 1\b14\b4.\b.2\b2.\b. C\bCa\bas\bse\be 2\b2 :\b: T\bTr\bra\bac\bci\bin\bng\bg t\bth\bhr\bre\bea\bad\bd p\bpa\ban\bni\bic\bcs\bs
-
- The less common and more painful case is when the tracing thread
- panics. In this case, the kernel debugger will be useless because it
- needs a healthy tracing thread in order to work. The first thing to
- do is get a backtrace from the tracing thread. This is done by
- figuring out what its pid is, firing up gdb, and attaching it to that
- pid. You can figure out the tracing thread pid by looking at the
- first line of the console output, which will look like this:
-
-
- tracing thread pid = 15851
-
-
-
-
- or by running ps on the host and finding the line that looks like
- this:
-
-
- jdike 15851 4.5 0.4 132568 1104 pts/0 S 21:34 0:05 ./linux [(tracing thread)]
-
-
-
-
- If the panic was 'segfault in signals', then follow the instructions
- above for collecting information about the location of the seg fault.
-
-
- If the tracing thread flaked out all by itself, then send that
- backtrace in and wait for our crack debugging team to fix the problem.
-
-
- 1\b14\b4.\b.3\b3.\b. C\bCa\bas\bse\be 3\b3 :\b: T\bTr\bra\bac\bci\bin\bng\bg t\bth\bhr\bre\bea\bad\bd p\bpa\ban\bni\bic\bcs\bs c\bca\bau\bus\bse\bed\bd b\bby\by o\bot\bth\bhe\ber\br t\bth\bhr\bre\bea\bad\bds\bs
-
- However, there are cases where the misbehavior of another thread
- caused the problem. The most common panic of this type is:
-
-
- wait_for_stop failed to wait for <pid> to stop with <signal number>
-
-
-
-
- In this case, you'll need to get a backtrace from the process men-
- tioned in the panic, which is complicated by the fact that the kernel
- debugger is defunct and without some fancy footwork, another gdb can't
- attach to it. So, this is how the fancy footwork goes:
-
- In a shell:
-
-
- host% kill -STOP pid
-
-
-
-
- Run gdb on the tracing thread as described in case 2 and do:
-
-
- (host gdb) call detach(pid)
-
-
- If you get a segfault, do it again. It always works the second time.
-
- Detach from the tracing thread and attach to that other thread:
-
-
- (host gdb) detach
-
-
-
-
-
-
- (host gdb) attach pid
-
-
-
-
- If gdb hangs when attaching to that process, go back to a shell and
- do:
-
-
- host%
- kill -CONT pid
-
-
-
-
- And then get the backtrace:
-
-
- (host gdb) backtrace
-
-
-
-
-
- 1\b14\b4.\b.4\b4.\b. C\bCa\bas\bse\be 4\b4 :\b: H\bHa\ban\bng\bgs\bs
-
- Hangs seem to be fairly rare, but they sometimes happen. When a hang
- happens, we need a backtrace from the offending process. Run the
- kernel debugger as described in case 1 and get a backtrace. If the
- current process is not the idle thread, then send in the backtrace.
- You can tell that it's the idle thread if the stack looks like this:
-
-
- #0 0x100b1401 in __libc_nanosleep ()
- #1 0x100a2885 in idle_sleep (secs=10) at time.c:122
- #2 0x100a546f in do_idle () at process_kern.c:445
- #3 0x100a5508 in cpu_idle () at process_kern.c:471
- #4 0x100ec18f in start_kernel () at init/main.c:592
- #5 0x100a3e10 in start_kernel_proc (unused=0x0) at um_arch.c:71
- #6 0x100a383f in signal_tramp (arg=0x100a3dd8) at trap_user.c:50
-
-
-
-
- If this is the case, then some other process is at fault, and went to
- sleep when it shouldn't have. Run ps on the host and figure out which
- process should not have gone to sleep and stayed asleep. Then attach
- to it with gdb and get a backtrace as described in case 3.
-
-
-
-
-
-
- 1\b15\b5.\b. T\bTh\bha\ban\bnk\bks\bs
-
-
- A number of people have helped this project in various ways, and this
- page gives recognition where recognition is due.
-
-
- If you're listed here and you would prefer a real link on your name,
- or no link at all, instead of the despammed email address pseudo-link,
- let me know.
-
-
- If you're not listed here and you think maybe you should be, please
- let me know that as well. I try to get everyone, but sometimes my
- bookkeeping lapses and I forget about contributions.
-
-
- 1\b15\b5.\b.1\b1.\b. C\bCo\bod\bde\be a\ban\bnd\bd D\bDo\boc\bcu\bum\bme\ben\bnt\bta\bat\bti\bio\bon\bn
-
- Rusty Russell <rusty at linuxcare.com.au> -
-
- +\bo wrote the HOWTO <http://user-mode-
- linux.sourceforge.net/UserModeLinux-HOWTO.html>
-
- +\bo prodded me into making this project official and putting it on
- SourceForge
-
- +\bo came up with the way cool UML logo <http://user-mode-
- linux.sourceforge.net/uml-small.png>
-
- +\bo redid the config process
-
-
- Peter Moulder <reiter at netspace.net.au> - Fixed my config and build
- processes, and added some useful code to the block driver
-
-
- Bill Stearns <wstearns at pobox.com> -
-
- +\bo HOWTO updates
-
- +\bo lots of bug reports
-
- +\bo lots of testing
-
- +\bo dedicated a box (uml.ists.dartmouth.edu) to support UML development
-
- +\bo wrote the mkrootfs script, which allows bootable filesystems of
- RPM-based distributions to be cranked out
-
- +\bo cranked out a large number of filesystems with said script
-
-
- Jim Leu <jleu at mindspring.com> - Wrote the virtual ethernet driver
- and associated usermode tools
-
- Lars Brinkhoff <http://lars.nocrew.org/> - Contributed the ptrace
- proxy from his own project <http://a386.nocrew.org/> to allow easier
- kernel debugging
-
-
- Andrea Arcangeli <andrea at suse.de> - Redid some of the early boot
- code so that it would work on machines with Large File Support
-
-
- Chris Emerson <http://www.chiark.greenend.org.uk/~cemerson/> - Did
- the first UML port to Linux/ppc
-
-
- Harald Welte <laforge at gnumonks.org> - Wrote the multicast
- transport for the network driver
-
-
- Jorgen Cederlof - Added special file support to hostfs
-
-
- Greg Lonnon <glonnon at ridgerun dot com> - Changed the ubd driver
- to allow it to layer a COW file on a shared read-only filesystem and
- wrote the iomem emulation support
-
-
- Henrik Nordstrom <http://hem.passagen.se/hno/> - Provided a variety
- of patches, fixes, and clues
-
-
- Lennert Buytenhek - Contributed various patches, a rewrite of the
- network driver, the first implementation of the mconsole driver, and
- did the bulk of the work needed to get SMP working again.
-
-
- Yon Uriarte - Fixed the TUN/TAP network backend while I slept.
-
-
- Adam Heath - Made a bunch of nice cleanups to the initialization code,
- plus various other small patches.
-
-
- Matt Zimmerman - Matt volunteered to be the UML Debian maintainer and
- is doing a real nice job of it. He also noticed and fixed a number of
- actually and potentially exploitable security holes in uml_net. Plus
- the occasional patch. I like patches.
-
-
- James McMechan - James seems to have taken over maintenance of the ubd
- driver and is doing a nice job of it.
-
-
- Chandan Kudige - wrote the umlgdb script which automates the reloading
- of module symbols.
-
-
- Steve Schmidtke - wrote the UML slirp transport and hostaudio drivers,
- enabling UML processes to access audio devices on the host. He also
- submitted patches for the slip transport and lots of other things.
-
-
- David Coulson <http://davidcoulson.net> -
-
- +\bo Set up the usermodelinux.org <http://usermodelinux.org> site,
- which is a great way of keeping the UML user community on top of
- UML goings-on.
-
- +\bo Site documentation and updates
-
- +\bo Nifty little UML management daemon UMLd
- <http://uml.openconsultancy.com/umld/>
-
- +\bo Lots of testing and bug reports
-
-
-
-
- 1\b15\b5.\b.2\b2.\b. F\bFl\blu\bus\bsh\bhi\bin\bng\bg o\bou\but\bt b\bbu\bug\bgs\bs
-
-
-
- +\bo Yuri Pudgorodsky
-
- +\bo Gerald Britton
-
- +\bo Ian Wehrman
-
- +\bo Gord Lamb
-
- +\bo Eugene Koontz
-
- +\bo John H. Hartman
-
- +\bo Anders Karlsson
-
- +\bo Daniel Phillips
-
- +\bo John Fremlin
-
- +\bo Rainer Burgstaller
-
- +\bo James Stevenson
-
- +\bo Matt Clay
-
- +\bo Cliff Jefferies
-
- +\bo Geoff Hoff
-
- +\bo Lennert Buytenhek
-
- +\bo Al Viro
-
- +\bo Frank Klingenhoefer
-
- +\bo Livio Baldini Soares
-
- +\bo Jon Burgess
-
- +\bo Petru Paler
-
- +\bo Paul
-
- +\bo Chris Reahard
-
- +\bo Sverker Nilsson
-
- +\bo Gong Su
-
- +\bo johan verrept
-
- +\bo Bjorn Eriksson
-
- +\bo Lorenzo Allegrucci
-
- +\bo Muli Ben-Yehuda
-
- +\bo David Mansfield
-
- +\bo Howard Goff
-
- +\bo Mike Anderson
-
- +\bo John Byrne
-
- +\bo Sapan J. Batia
-
- +\bo Iris Huang
-
- +\bo Jan Hudec
-
- +\bo Voluspa
-
-
-
-
- 1\b15\b5.\b.3\b3.\b. B\bBu\bug\bgl\ble\bet\bts\bs a\ban\bnd\bd c\bcl\ble\bea\ban\bn-\b-u\bup\bps\bs
-
-
-
- +\bo Dave Zarzycki
-
- +\bo Adam Lazur
-
- +\bo Boria Feigin
-
- +\bo Brian J. Murrell
-
- +\bo JS
-
- +\bo Roman Zippel
-
- +\bo Wil Cooley
-
- +\bo Ayelet Shemesh
-
- +\bo Will Dyson
-
- +\bo Sverker Nilsson
-
- +\bo dvorak
-
- +\bo v.naga srinivas
-
- +\bo Shlomi Fish
-
- +\bo Roger Binns
-
- +\bo johan verrept
-
- +\bo MrChuoi
-
- +\bo Peter Cleve
-
- +\bo Vincent Guffens
-
- +\bo Nathan Scott
-
- +\bo Patrick Caulfield
-
- +\bo jbearce
-
- +\bo Catalin Marinas
-
- +\bo Shane Spencer
-
- +\bo Zou Min
-
-
- +\bo Ryan Boder
-
- +\bo Lorenzo Colitti
-
- +\bo Gwendal Grignou
-
- +\bo Andre' Breiler
-
- +\bo Tsutomu Yasuda
-
-
-
- 1\b15\b5.\b.4\b4.\b. C\bCa\bas\bse\be S\bSt\btu\bud\bdi\bie\bes\bs
-
-
- +\bo Jon Wright
-
- +\bo William McEwan
-
- +\bo Michael Richardson
-
-
-
- 1\b15\b5.\b.5\b5.\b. O\bOt\bth\bhe\ber\br c\bco\bon\bnt\btr\bri\bib\bbu\but\bti\bio\bon\bns\bs
-
-
- Bill Carr <Bill.Carr at compaq.com> made the Red Hat mkrootfs script
- work with RH 6.2.
-
- Michael Jennings <mikejen at hevanet.com> sent in some material which
- is now gracing the top of the index page <http://user-mode-
- linux.sourceforge.net/> of this site.
-
- SGI <http://www.sgi.com> (and more specifically Ralf Baechle <ralf at
- uni-koblenz.de> ) gave me an account on oss.sgi.com
- <http://www.oss.sgi.com> . The bandwidth there made it possible to
- produce most of the filesystems available on the project download
- page.
-
- Laurent Bonnaud <Laurent.Bonnaud at inpg.fr> took the old grotty
- Debian filesystem that I've been distributing and updated it to 2.2.
- It is now available by itself here.
-
- Rik van Riel gave me some ftp space on ftp.nl.linux.org so I can make
- releases even when Sourceforge is broken.
-
- Rodrigo de Castro looked at my broken pte code and told me what was
- wrong with it, letting me fix a long-standing (several weeks) and
- serious set of bugs.
-
- Chris Reahard built a specialized root filesystem for running a DNS
- server jailed inside UML. It's available from the download
- <http://user-mode-linux.sourceforge.net/dl-sf.html> page in the Jail
- Filesystems section.
-
-
-
-
-
-
-
-
-
-
-
-
--- /dev/null
+The Definitive KVM (Kernel-based Virtual Machine) API Documentation
+===================================================================
+
+1. General description
+
+The kvm API is a set of ioctls that are issued to control various aspects
+of a virtual machine. The ioctls belong to three classes
+
+ - System ioctls: These query and set global attributes which affect the
+ whole kvm subsystem. In addition a system ioctl is used to create
+ virtual machines
+
+ - VM ioctls: These query and set attributes that affect an entire virtual
+ machine, for example memory layout. In addition a VM ioctl is used to
+ create virtual cpus (vcpus).
+
+ Only run VM ioctls from the same process (address space) that was used
+ to create the VM.
+
+ - vcpu ioctls: These query and set attributes that control the operation
+ of a single virtual cpu.
+
+ Only run vcpu ioctls from the same thread that was used to create the
+ vcpu.
+
+2. File descriptors
+
+The kvm API is centered around file descriptors. An initial
+open("/dev/kvm") obtains a handle to the kvm subsystem; this handle
+can be used to issue system ioctls. A KVM_CREATE_VM ioctl on this
+handle will create a VM file descriptor which can be used to issue VM
+ioctls. A KVM_CREATE_VCPU ioctl on a VM fd will create a virtual cpu
+and return a file descriptor pointing to it. Finally, ioctls on a vcpu
+fd can be used to control the vcpu, including the important task of
+actually running guest code.
+
+In general file descriptors can be migrated among processes by means
+of fork() and the SCM_RIGHTS facility of unix domain socket. These
+kinds of tricks are explicitly not supported by kvm. While they will
+not cause harm to the host, their actual behavior is not guaranteed by
+the API. The only supported use is one virtual machine per process,
+and one vcpu per thread.
+
+3. Extensions
+
+As of Linux 2.6.22, the KVM ABI has been stabilized: no backward
+incompatible change are allowed. However, there is an extension
+facility that allows backward-compatible extensions to the API to be
+queried and used.
+
+The extension mechanism is not based on on the Linux version number.
+Instead, kvm defines extension identifiers and a facility to query
+whether a particular extension identifier is available. If it is, a
+set of ioctls is available for application use.
+
+4. API description
+
+This section describes ioctls that can be used to control kvm guests.
+For each ioctl, the following information is provided along with a
+description:
+
+ Capability: which KVM extension provides this ioctl. Can be 'basic',
+ which means that is will be provided by any kernel that supports
+ API version 12 (see section 4.1), or a KVM_CAP_xyz constant, which
+ means availability needs to be checked with KVM_CHECK_EXTENSION
+ (see section 4.4).
+
+ Architectures: which instruction set architectures provide this ioctl.
+ x86 includes both i386 and x86_64.
+
+ Type: system, vm, or vcpu.
+
+ Parameters: what parameters are accepted by the ioctl.
+
+ Returns: the return value. General error numbers (EBADF, ENOMEM, EINVAL)
+ are not detailed, but errors with specific meanings are.
+
+4.1 KVM_GET_API_VERSION
+
+Capability: basic
+Architectures: all
+Type: system ioctl
+Parameters: none
+Returns: the constant KVM_API_VERSION (=12)
+
+This identifies the API version as the stable kvm API. It is not
+expected that this number will change. However, Linux 2.6.20 and
+2.6.21 report earlier versions; these are not documented and not
+supported. Applications should refuse to run if KVM_GET_API_VERSION
+returns a value other than 12. If this check passes, all ioctls
+described as 'basic' will be available.
+
+4.2 KVM_CREATE_VM
+
+Capability: basic
+Architectures: all
+Type: system ioctl
+Parameters: none
+Returns: a VM fd that can be used to control the new virtual machine.
+
+The new VM has no virtual cpus and no memory. An mmap() of a VM fd
+will access the virtual machine's physical address space; offset zero
+corresponds to guest physical address zero. Use of mmap() on a VM fd
+is discouraged if userspace memory allocation (KVM_CAP_USER_MEMORY) is
+available.
+
+4.3 KVM_GET_MSR_INDEX_LIST
+
+Capability: basic
+Architectures: x86
+Type: system
+Parameters: struct kvm_msr_list (in/out)
+Returns: 0 on success; -1 on error
+Errors:
+ E2BIG: the msr index list is to be to fit in the array specified by
+ the user.
+
+struct kvm_msr_list {
+ __u32 nmsrs; /* number of msrs in entries */
+ __u32 indices[0];
+};
+
+This ioctl returns the guest msrs that are supported. The list varies
+by kvm version and host processor, but does not change otherwise. The
+user fills in the size of the indices array in nmsrs, and in return
+kvm adjusts nmsrs to reflect the actual number of msrs and fills in
+the indices array with their numbers.
+
+Note: if kvm indicates supports MCE (KVM_CAP_MCE), then the MCE bank MSRs are
+not returned in the MSR list, as different vcpus can have a different number
+of banks, as set via the KVM_X86_SETUP_MCE ioctl.
+
+4.4 KVM_CHECK_EXTENSION
+
+Capability: basic
+Architectures: all
+Type: system ioctl
+Parameters: extension identifier (KVM_CAP_*)
+Returns: 0 if unsupported; 1 (or some other positive integer) if supported
+
+The API allows the application to query about extensions to the core
+kvm API. Userspace passes an extension identifier (an integer) and
+receives an integer that describes the extension availability.
+Generally 0 means no and 1 means yes, but some extensions may report
+additional information in the integer return value.
+
+4.5 KVM_GET_VCPU_MMAP_SIZE
+
+Capability: basic
+Architectures: all
+Type: system ioctl
+Parameters: none
+Returns: size of vcpu mmap area, in bytes
+
+The KVM_RUN ioctl (cf.) communicates with userspace via a shared
+memory region. This ioctl returns the size of that region. See the
+KVM_RUN documentation for details.
+
+4.6 KVM_SET_MEMORY_REGION
+
+Capability: basic
+Architectures: all
+Type: vm ioctl
+Parameters: struct kvm_memory_region (in)
+Returns: 0 on success, -1 on error
+
+This ioctl is obsolete and has been removed.
+
+4.7 KVM_CREATE_VCPU
+
+Capability: basic
+Architectures: all
+Type: vm ioctl
+Parameters: vcpu id (apic id on x86)
+Returns: vcpu fd on success, -1 on error
+
+This API adds a vcpu to a virtual machine. The vcpu id is a small integer
+in the range [0, max_vcpus).
+
+4.8 KVM_GET_DIRTY_LOG (vm ioctl)
+
+Capability: basic
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_dirty_log (in/out)
+Returns: 0 on success, -1 on error
+
+/* for KVM_GET_DIRTY_LOG */
+struct kvm_dirty_log {
+ __u32 slot;
+ __u32 padding;
+ union {
+ void __user *dirty_bitmap; /* one bit per page */
+ __u64 padding;
+ };
+};
+
+Given a memory slot, return a bitmap containing any pages dirtied
+since the last call to this ioctl. Bit 0 is the first page in the
+memory slot. Ensure the entire structure is cleared to avoid padding
+issues.
+
+4.9 KVM_SET_MEMORY_ALIAS
+
+Capability: basic
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_memory_alias (in)
+Returns: 0 (success), -1 (error)
+
+This ioctl is obsolete and has been removed.
+
+4.10 KVM_RUN
+
+Capability: basic
+Architectures: all
+Type: vcpu ioctl
+Parameters: none
+Returns: 0 on success, -1 on error
+Errors:
+ EINTR: an unmasked signal is pending
+
+This ioctl is used to run a guest virtual cpu. While there are no
+explicit parameters, there is an implicit parameter block that can be
+obtained by mmap()ing the vcpu fd at offset 0, with the size given by
+KVM_GET_VCPU_MMAP_SIZE. The parameter block is formatted as a 'struct
+kvm_run' (see below).
+
+4.11 KVM_GET_REGS
+
+Capability: basic
+Architectures: all
+Type: vcpu ioctl
+Parameters: struct kvm_regs (out)
+Returns: 0 on success, -1 on error
+
+Reads the general purpose registers from the vcpu.
+
+/* x86 */
+struct kvm_regs {
+ /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */
+ __u64 rax, rbx, rcx, rdx;
+ __u64 rsi, rdi, rsp, rbp;
+ __u64 r8, r9, r10, r11;
+ __u64 r12, r13, r14, r15;
+ __u64 rip, rflags;
+};
+
+4.12 KVM_SET_REGS
+
+Capability: basic
+Architectures: all
+Type: vcpu ioctl
+Parameters: struct kvm_regs (in)
+Returns: 0 on success, -1 on error
+
+Writes the general purpose registers into the vcpu.
+
+See KVM_GET_REGS for the data structure.
+
+4.13 KVM_GET_SREGS
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_sregs (out)
+Returns: 0 on success, -1 on error
+
+Reads special registers from the vcpu.
+
+/* x86 */
+struct kvm_sregs {
+ struct kvm_segment cs, ds, es, fs, gs, ss;
+ struct kvm_segment tr, ldt;
+ struct kvm_dtable gdt, idt;
+ __u64 cr0, cr2, cr3, cr4, cr8;
+ __u64 efer;
+ __u64 apic_base;
+ __u64 interrupt_bitmap[(KVM_NR_INTERRUPTS + 63) / 64];
+};
+
+interrupt_bitmap is a bitmap of pending external interrupts. At most
+one bit may be set. This interrupt has been acknowledged by the APIC
+but not yet injected into the cpu core.
+
+4.14 KVM_SET_SREGS
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_sregs (in)
+Returns: 0 on success, -1 on error
+
+Writes special registers into the vcpu. See KVM_GET_SREGS for the
+data structures.
+
+4.15 KVM_TRANSLATE
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_translation (in/out)
+Returns: 0 on success, -1 on error
+
+Translates a virtual address according to the vcpu's current address
+translation mode.
+
+struct kvm_translation {
+ /* in */
+ __u64 linear_address;
+
+ /* out */
+ __u64 physical_address;
+ __u8 valid;
+ __u8 writeable;
+ __u8 usermode;
+ __u8 pad[5];
+};
+
+4.16 KVM_INTERRUPT
+
+Capability: basic
+Architectures: x86, ppc
+Type: vcpu ioctl
+Parameters: struct kvm_interrupt (in)
+Returns: 0 on success, -1 on error
+
+Queues a hardware interrupt vector to be injected. This is only
+useful if in-kernel local APIC or equivalent is not used.
+
+/* for KVM_INTERRUPT */
+struct kvm_interrupt {
+ /* in */
+ __u32 irq;
+};
+
+X86:
+
+Note 'irq' is an interrupt vector, not an interrupt pin or line.
+
+PPC:
+
+Queues an external interrupt to be injected. This ioctl is overleaded
+with 3 different irq values:
+
+a) KVM_INTERRUPT_SET
+
+ This injects an edge type external interrupt into the guest once it's ready
+ to receive interrupts. When injected, the interrupt is done.
+
+b) KVM_INTERRUPT_UNSET
+
+ This unsets any pending interrupt.
+
+ Only available with KVM_CAP_PPC_UNSET_IRQ.
+
+c) KVM_INTERRUPT_SET_LEVEL
+
+ This injects a level type external interrupt into the guest context. The
+ interrupt stays pending until a specific ioctl with KVM_INTERRUPT_UNSET
+ is triggered.
+
+ Only available with KVM_CAP_PPC_IRQ_LEVEL.
+
+Note that any value for 'irq' other than the ones stated above is invalid
+and incurs unexpected behavior.
+
+4.17 KVM_DEBUG_GUEST
+
+Capability: basic
+Architectures: none
+Type: vcpu ioctl
+Parameters: none)
+Returns: -1 on error
+
+Support for this has been removed. Use KVM_SET_GUEST_DEBUG instead.
+
+4.18 KVM_GET_MSRS
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_msrs (in/out)
+Returns: 0 on success, -1 on error
+
+Reads model-specific registers from the vcpu. Supported msr indices can
+be obtained using KVM_GET_MSR_INDEX_LIST.
+
+struct kvm_msrs {
+ __u32 nmsrs; /* number of msrs in entries */
+ __u32 pad;
+
+ struct kvm_msr_entry entries[0];
+};
+
+struct kvm_msr_entry {
+ __u32 index;
+ __u32 reserved;
+ __u64 data;
+};
+
+Application code should set the 'nmsrs' member (which indicates the
+size of the entries array) and the 'index' member of each array entry.
+kvm will fill in the 'data' member.
+
+4.19 KVM_SET_MSRS
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_msrs (in)
+Returns: 0 on success, -1 on error
+
+Writes model-specific registers to the vcpu. See KVM_GET_MSRS for the
+data structures.
+
+Application code should set the 'nmsrs' member (which indicates the
+size of the entries array), and the 'index' and 'data' members of each
+array entry.
+
+4.20 KVM_SET_CPUID
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_cpuid (in)
+Returns: 0 on success, -1 on error
+
+Defines the vcpu responses to the cpuid instruction. Applications
+should use the KVM_SET_CPUID2 ioctl if available.
+
+
+struct kvm_cpuid_entry {
+ __u32 function;
+ __u32 eax;
+ __u32 ebx;
+ __u32 ecx;
+ __u32 edx;
+ __u32 padding;
+};
+
+/* for KVM_SET_CPUID */
+struct kvm_cpuid {
+ __u32 nent;
+ __u32 padding;
+ struct kvm_cpuid_entry entries[0];
+};
+
+4.21 KVM_SET_SIGNAL_MASK
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_signal_mask (in)
+Returns: 0 on success, -1 on error
+
+Defines which signals are blocked during execution of KVM_RUN. This
+signal mask temporarily overrides the threads signal mask. Any
+unblocked signal received (except SIGKILL and SIGSTOP, which retain
+their traditional behaviour) will cause KVM_RUN to return with -EINTR.
+
+Note the signal will only be delivered if not blocked by the original
+signal mask.
+
+/* for KVM_SET_SIGNAL_MASK */
+struct kvm_signal_mask {
+ __u32 len;
+ __u8 sigset[0];
+};
+
+4.22 KVM_GET_FPU
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_fpu (out)
+Returns: 0 on success, -1 on error
+
+Reads the floating point state from the vcpu.
+
+/* for KVM_GET_FPU and KVM_SET_FPU */
+struct kvm_fpu {
+ __u8 fpr[8][16];
+ __u16 fcw;
+ __u16 fsw;
+ __u8 ftwx; /* in fxsave format */
+ __u8 pad1;
+ __u16 last_opcode;
+ __u64 last_ip;
+ __u64 last_dp;
+ __u8 xmm[16][16];
+ __u32 mxcsr;
+ __u32 pad2;
+};
+
+4.23 KVM_SET_FPU
+
+Capability: basic
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_fpu (in)
+Returns: 0 on success, -1 on error
+
+Writes the floating point state to the vcpu.
+
+/* for KVM_GET_FPU and KVM_SET_FPU */
+struct kvm_fpu {
+ __u8 fpr[8][16];
+ __u16 fcw;
+ __u16 fsw;
+ __u8 ftwx; /* in fxsave format */
+ __u8 pad1;
+ __u16 last_opcode;
+ __u64 last_ip;
+ __u64 last_dp;
+ __u8 xmm[16][16];
+ __u32 mxcsr;
+ __u32 pad2;
+};
+
+4.24 KVM_CREATE_IRQCHIP
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86, ia64
+Type: vm ioctl
+Parameters: none
+Returns: 0 on success, -1 on error
+
+Creates an interrupt controller model in the kernel. On x86, creates a virtual
+ioapic, a virtual PIC (two PICs, nested), and sets up future vcpus to have a
+local APIC. IRQ routing for GSIs 0-15 is set to both PIC and IOAPIC; GSI 16-23
+only go to the IOAPIC. On ia64, a IOSAPIC is created.
+
+4.25 KVM_IRQ_LINE
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86, ia64
+Type: vm ioctl
+Parameters: struct kvm_irq_level
+Returns: 0 on success, -1 on error
+
+Sets the level of a GSI input to the interrupt controller model in the kernel.
+Requires that an interrupt controller model has been previously created with
+KVM_CREATE_IRQCHIP. Note that edge-triggered interrupts require the level
+to be set to 1 and then back to 0.
+
+struct kvm_irq_level {
+ union {
+ __u32 irq; /* GSI */
+ __s32 status; /* not used for KVM_IRQ_LEVEL */
+ };
+ __u32 level; /* 0 or 1 */
+};
+
+4.26 KVM_GET_IRQCHIP
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86, ia64
+Type: vm ioctl
+Parameters: struct kvm_irqchip (in/out)
+Returns: 0 on success, -1 on error
+
+Reads the state of a kernel interrupt controller created with
+KVM_CREATE_IRQCHIP into a buffer provided by the caller.
+
+struct kvm_irqchip {
+ __u32 chip_id; /* 0 = PIC1, 1 = PIC2, 2 = IOAPIC */
+ __u32 pad;
+ union {
+ char dummy[512]; /* reserving space */
+ struct kvm_pic_state pic;
+ struct kvm_ioapic_state ioapic;
+ } chip;
+};
+
+4.27 KVM_SET_IRQCHIP
+
+Capability: KVM_CAP_IRQCHIP
+Architectures: x86, ia64
+Type: vm ioctl
+Parameters: struct kvm_irqchip (in)
+Returns: 0 on success, -1 on error
+
+Sets the state of a kernel interrupt controller created with
+KVM_CREATE_IRQCHIP from a buffer provided by the caller.
+
+struct kvm_irqchip {
+ __u32 chip_id; /* 0 = PIC1, 1 = PIC2, 2 = IOAPIC */
+ __u32 pad;
+ union {
+ char dummy[512]; /* reserving space */
+ struct kvm_pic_state pic;
+ struct kvm_ioapic_state ioapic;
+ } chip;
+};
+
+4.28 KVM_XEN_HVM_CONFIG
+
+Capability: KVM_CAP_XEN_HVM
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_xen_hvm_config (in)
+Returns: 0 on success, -1 on error
+
+Sets the MSR that the Xen HVM guest uses to initialize its hypercall
+page, and provides the starting address and size of the hypercall
+blobs in userspace. When the guest writes the MSR, kvm copies one
+page of a blob (32- or 64-bit, depending on the vcpu mode) to guest
+memory.
+
+struct kvm_xen_hvm_config {
+ __u32 flags;
+ __u32 msr;
+ __u64 blob_addr_32;
+ __u64 blob_addr_64;
+ __u8 blob_size_32;
+ __u8 blob_size_64;
+ __u8 pad2[30];
+};
+
+4.29 KVM_GET_CLOCK
+
+Capability: KVM_CAP_ADJUST_CLOCK
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_clock_data (out)
+Returns: 0 on success, -1 on error
+
+Gets the current timestamp of kvmclock as seen by the current guest. In
+conjunction with KVM_SET_CLOCK, it is used to ensure monotonicity on scenarios
+such as migration.
+
+struct kvm_clock_data {
+ __u64 clock; /* kvmclock current value */
+ __u32 flags;
+ __u32 pad[9];
+};
+
+4.30 KVM_SET_CLOCK
+
+Capability: KVM_CAP_ADJUST_CLOCK
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_clock_data (in)
+Returns: 0 on success, -1 on error
+
+Sets the current timestamp of kvmclock to the value specified in its parameter.
+In conjunction with KVM_GET_CLOCK, it is used to ensure monotonicity on scenarios
+such as migration.
+
+struct kvm_clock_data {
+ __u64 clock; /* kvmclock current value */
+ __u32 flags;
+ __u32 pad[9];
+};
+
+4.31 KVM_GET_VCPU_EVENTS
+
+Capability: KVM_CAP_VCPU_EVENTS
+Extended by: KVM_CAP_INTR_SHADOW
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_vcpu_event (out)
+Returns: 0 on success, -1 on error
+
+Gets currently pending exceptions, interrupts, and NMIs as well as related
+states of the vcpu.
+
+struct kvm_vcpu_events {
+ struct {
+ __u8 injected;
+ __u8 nr;
+ __u8 has_error_code;
+ __u8 pad;
+ __u32 error_code;
+ } exception;
+ struct {
+ __u8 injected;
+ __u8 nr;
+ __u8 soft;
+ __u8 shadow;
+ } interrupt;
+ struct {
+ __u8 injected;
+ __u8 pending;
+ __u8 masked;
+ __u8 pad;
+ } nmi;
+ __u32 sipi_vector;
+ __u32 flags;
+};
+
+KVM_VCPUEVENT_VALID_SHADOW may be set in the flags field to signal that
+interrupt.shadow contains a valid state. Otherwise, this field is undefined.
+
+4.32 KVM_SET_VCPU_EVENTS
+
+Capability: KVM_CAP_VCPU_EVENTS
+Extended by: KVM_CAP_INTR_SHADOW
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_vcpu_event (in)
+Returns: 0 on success, -1 on error
+
+Set pending exceptions, interrupts, and NMIs as well as related states of the
+vcpu.
+
+See KVM_GET_VCPU_EVENTS for the data structure.
+
+Fields that may be modified asynchronously by running VCPUs can be excluded
+from the update. These fields are nmi.pending and sipi_vector. Keep the
+corresponding bits in the flags field cleared to suppress overwriting the
+current in-kernel state. The bits are:
+
+KVM_VCPUEVENT_VALID_NMI_PENDING - transfer nmi.pending to the kernel
+KVM_VCPUEVENT_VALID_SIPI_VECTOR - transfer sipi_vector
+
+If KVM_CAP_INTR_SHADOW is available, KVM_VCPUEVENT_VALID_SHADOW can be set in
+the flags field to signal that interrupt.shadow contains a valid state and
+shall be written into the VCPU.
+
+4.33 KVM_GET_DEBUGREGS
+
+Capability: KVM_CAP_DEBUGREGS
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_debugregs (out)
+Returns: 0 on success, -1 on error
+
+Reads debug registers from the vcpu.
+
+struct kvm_debugregs {
+ __u64 db[4];
+ __u64 dr6;
+ __u64 dr7;
+ __u64 flags;
+ __u64 reserved[9];
+};
+
+4.34 KVM_SET_DEBUGREGS
+
+Capability: KVM_CAP_DEBUGREGS
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_debugregs (in)
+Returns: 0 on success, -1 on error
+
+Writes debug registers into the vcpu.
+
+See KVM_GET_DEBUGREGS for the data structure. The flags field is unused
+yet and must be cleared on entry.
+
+4.35 KVM_SET_USER_MEMORY_REGION
+
+Capability: KVM_CAP_USER_MEM
+Architectures: all
+Type: vm ioctl
+Parameters: struct kvm_userspace_memory_region (in)
+Returns: 0 on success, -1 on error
+
+struct kvm_userspace_memory_region {
+ __u32 slot;
+ __u32 flags;
+ __u64 guest_phys_addr;
+ __u64 memory_size; /* bytes */
+ __u64 userspace_addr; /* start of the userspace allocated memory */
+};
+
+/* for kvm_memory_region::flags */
+#define KVM_MEM_LOG_DIRTY_PAGES 1UL
+
+This ioctl allows the user to create or modify a guest physical memory
+slot. When changing an existing slot, it may be moved in the guest
+physical memory space, or its flags may be modified. It may not be
+resized. Slots may not overlap in guest physical address space.
+
+Memory for the region is taken starting at the address denoted by the
+field userspace_addr, which must point at user addressable memory for
+the entire memory slot size. Any object may back this memory, including
+anonymous memory, ordinary files, and hugetlbfs.
+
+It is recommended that the lower 21 bits of guest_phys_addr and userspace_addr
+be identical. This allows large pages in the guest to be backed by large
+pages in the host.
+
+The flags field supports just one flag, KVM_MEM_LOG_DIRTY_PAGES, which
+instructs kvm to keep track of writes to memory within the slot. See
+the KVM_GET_DIRTY_LOG ioctl.
+
+When the KVM_CAP_SYNC_MMU capability, changes in the backing of the memory
+region are automatically reflected into the guest. For example, an mmap()
+that affects the region will be made visible immediately. Another example
+is madvise(MADV_DROP).
+
+It is recommended to use this API instead of the KVM_SET_MEMORY_REGION ioctl.
+The KVM_SET_MEMORY_REGION does not allow fine grained control over memory
+allocation and is deprecated.
+
+4.36 KVM_SET_TSS_ADDR
+
+Capability: KVM_CAP_SET_TSS_ADDR
+Architectures: x86
+Type: vm ioctl
+Parameters: unsigned long tss_address (in)
+Returns: 0 on success, -1 on error
+
+This ioctl defines the physical address of a three-page region in the guest
+physical address space. The region must be within the first 4GB of the
+guest physical address space and must not conflict with any memory slot
+or any mmio address. The guest may malfunction if it accesses this memory
+region.
+
+This ioctl is required on Intel-based hosts. This is needed on Intel hardware
+because of a quirk in the virtualization implementation (see the internals
+documentation when it pops into existence).
+
+4.37 KVM_ENABLE_CAP
+
+Capability: KVM_CAP_ENABLE_CAP
+Architectures: ppc
+Type: vcpu ioctl
+Parameters: struct kvm_enable_cap (in)
+Returns: 0 on success; -1 on error
+
++Not all extensions are enabled by default. Using this ioctl the application
+can enable an extension, making it available to the guest.
+
+On systems that do not support this ioctl, it always fails. On systems that
+do support it, it only works for extensions that are supported for enablement.
+
+To check if a capability can be enabled, the KVM_CHECK_EXTENSION ioctl should
+be used.
+
+struct kvm_enable_cap {
+ /* in */
+ __u32 cap;
+
+The capability that is supposed to get enabled.
+
+ __u32 flags;
+
+A bitfield indicating future enhancements. Has to be 0 for now.
+
+ __u64 args[4];
+
+Arguments for enabling a feature. If a feature needs initial values to
+function properly, this is the place to put them.
+
+ __u8 pad[64];
+};
+
+4.38 KVM_GET_MP_STATE
+
+Capability: KVM_CAP_MP_STATE
+Architectures: x86, ia64
+Type: vcpu ioctl
+Parameters: struct kvm_mp_state (out)
+Returns: 0 on success; -1 on error
+
+struct kvm_mp_state {
+ __u32 mp_state;
+};
+
+Returns the vcpu's current "multiprocessing state" (though also valid on
+uniprocessor guests).
+
+Possible values are:
+
+ - KVM_MP_STATE_RUNNABLE: the vcpu is currently running
+ - KVM_MP_STATE_UNINITIALIZED: the vcpu is an application processor (AP)
+ which has not yet received an INIT signal
+ - KVM_MP_STATE_INIT_RECEIVED: the vcpu has received an INIT signal, and is
+ now ready for a SIPI
+ - KVM_MP_STATE_HALTED: the vcpu has executed a HLT instruction and
+ is waiting for an interrupt
+ - KVM_MP_STATE_SIPI_RECEIVED: the vcpu has just received a SIPI (vector
+ accessible via KVM_GET_VCPU_EVENTS)
+
+This ioctl is only useful after KVM_CREATE_IRQCHIP. Without an in-kernel
+irqchip, the multiprocessing state must be maintained by userspace.
+
+4.39 KVM_SET_MP_STATE
+
+Capability: KVM_CAP_MP_STATE
+Architectures: x86, ia64
+Type: vcpu ioctl
+Parameters: struct kvm_mp_state (in)
+Returns: 0 on success; -1 on error
+
+Sets the vcpu's current "multiprocessing state"; see KVM_GET_MP_STATE for
+arguments.
+
+This ioctl is only useful after KVM_CREATE_IRQCHIP. Without an in-kernel
+irqchip, the multiprocessing state must be maintained by userspace.
+
+4.40 KVM_SET_IDENTITY_MAP_ADDR
+
+Capability: KVM_CAP_SET_IDENTITY_MAP_ADDR
+Architectures: x86
+Type: vm ioctl
+Parameters: unsigned long identity (in)
+Returns: 0 on success, -1 on error
+
+This ioctl defines the physical address of a one-page region in the guest
+physical address space. The region must be within the first 4GB of the
+guest physical address space and must not conflict with any memory slot
+or any mmio address. The guest may malfunction if it accesses this memory
+region.
+
+This ioctl is required on Intel-based hosts. This is needed on Intel hardware
+because of a quirk in the virtualization implementation (see the internals
+documentation when it pops into existence).
+
+4.41 KVM_SET_BOOT_CPU_ID
+
+Capability: KVM_CAP_SET_BOOT_CPU_ID
+Architectures: x86, ia64
+Type: vm ioctl
+Parameters: unsigned long vcpu_id
+Returns: 0 on success, -1 on error
+
+Define which vcpu is the Bootstrap Processor (BSP). Values are the same
+as the vcpu id in KVM_CREATE_VCPU. If this ioctl is not called, the default
+is vcpu 0.
+
+4.42 KVM_GET_XSAVE
+
+Capability: KVM_CAP_XSAVE
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_xsave (out)
+Returns: 0 on success, -1 on error
+
+struct kvm_xsave {
+ __u32 region[1024];
+};
+
+This ioctl would copy current vcpu's xsave struct to the userspace.
+
+4.43 KVM_SET_XSAVE
+
+Capability: KVM_CAP_XSAVE
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_xsave (in)
+Returns: 0 on success, -1 on error
+
+struct kvm_xsave {
+ __u32 region[1024];
+};
+
+This ioctl would copy userspace's xsave struct to the kernel.
+
+4.44 KVM_GET_XCRS
+
+Capability: KVM_CAP_XCRS
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_xcrs (out)
+Returns: 0 on success, -1 on error
+
+struct kvm_xcr {
+ __u32 xcr;
+ __u32 reserved;
+ __u64 value;
+};
+
+struct kvm_xcrs {
+ __u32 nr_xcrs;
+ __u32 flags;
+ struct kvm_xcr xcrs[KVM_MAX_XCRS];
+ __u64 padding[16];
+};
+
+This ioctl would copy current vcpu's xcrs to the userspace.
+
+4.45 KVM_SET_XCRS
+
+Capability: KVM_CAP_XCRS
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_xcrs (in)
+Returns: 0 on success, -1 on error
+
+struct kvm_xcr {
+ __u32 xcr;
+ __u32 reserved;
+ __u64 value;
+};
+
+struct kvm_xcrs {
+ __u32 nr_xcrs;
+ __u32 flags;
+ struct kvm_xcr xcrs[KVM_MAX_XCRS];
+ __u64 padding[16];
+};
+
+This ioctl would set vcpu's xcr to the value userspace specified.
+
+4.46 KVM_GET_SUPPORTED_CPUID
+
+Capability: KVM_CAP_EXT_CPUID
+Architectures: x86
+Type: system ioctl
+Parameters: struct kvm_cpuid2 (in/out)
+Returns: 0 on success, -1 on error
+
+struct kvm_cpuid2 {
+ __u32 nent;
+ __u32 padding;
+ struct kvm_cpuid_entry2 entries[0];
+};
+
+#define KVM_CPUID_FLAG_SIGNIFCANT_INDEX 1
+#define KVM_CPUID_FLAG_STATEFUL_FUNC 2
+#define KVM_CPUID_FLAG_STATE_READ_NEXT 4
+
+struct kvm_cpuid_entry2 {
+ __u32 function;
+ __u32 index;
+ __u32 flags;
+ __u32 eax;
+ __u32 ebx;
+ __u32 ecx;
+ __u32 edx;
+ __u32 padding[3];
+};
+
+This ioctl returns x86 cpuid features which are supported by both the hardware
+and kvm. Userspace can use the information returned by this ioctl to
+construct cpuid information (for KVM_SET_CPUID2) that is consistent with
+hardware, kernel, and userspace capabilities, and with user requirements (for
+example, the user may wish to constrain cpuid to emulate older hardware,
+or for feature consistency across a cluster).
+
+Userspace invokes KVM_GET_SUPPORTED_CPUID by passing a kvm_cpuid2 structure
+with the 'nent' field indicating the number of entries in the variable-size
+array 'entries'. If the number of entries is too low to describe the cpu
+capabilities, an error (E2BIG) is returned. If the number is too high,
+the 'nent' field is adjusted and an error (ENOMEM) is returned. If the
+number is just right, the 'nent' field is adjusted to the number of valid
+entries in the 'entries' array, which is then filled.
+
+The entries returned are the host cpuid as returned by the cpuid instruction,
+with unknown or unsupported features masked out. Some features (for example,
+x2apic), may not be present in the host cpu, but are exposed by kvm if it can
+emulate them efficiently. The fields in each entry are defined as follows:
+
+ function: the eax value used to obtain the entry
+ index: the ecx value used to obtain the entry (for entries that are
+ affected by ecx)
+ flags: an OR of zero or more of the following:
+ KVM_CPUID_FLAG_SIGNIFCANT_INDEX:
+ if the index field is valid
+ KVM_CPUID_FLAG_STATEFUL_FUNC:
+ if cpuid for this function returns different values for successive
+ invocations; there will be several entries with the same function,
+ all with this flag set
+ KVM_CPUID_FLAG_STATE_READ_NEXT:
+ for KVM_CPUID_FLAG_STATEFUL_FUNC entries, set if this entry is
+ the first entry to be read by a cpu
+ eax, ebx, ecx, edx: the values returned by the cpuid instruction for
+ this function/index combination
+
+4.47 KVM_PPC_GET_PVINFO
+
+Capability: KVM_CAP_PPC_GET_PVINFO
+Architectures: ppc
+Type: vm ioctl
+Parameters: struct kvm_ppc_pvinfo (out)
+Returns: 0 on success, !0 on error
+
+struct kvm_ppc_pvinfo {
+ __u32 flags;
+ __u32 hcall[4];
+ __u8 pad[108];
+};
+
+This ioctl fetches PV specific information that need to be passed to the guest
+using the device tree or other means from vm context.
+
+For now the only implemented piece of information distributed here is an array
+of 4 instructions that make up a hypercall.
+
+If any additional field gets added to this structure later on, a bit for that
+additional piece of information will be set in the flags bitmap.
+
+4.48 KVM_ASSIGN_PCI_DEVICE
+
+Capability: KVM_CAP_DEVICE_ASSIGNMENT
+Architectures: x86 ia64
+Type: vm ioctl
+Parameters: struct kvm_assigned_pci_dev (in)
+Returns: 0 on success, -1 on error
+
+Assigns a host PCI device to the VM.
+
+struct kvm_assigned_pci_dev {
+ __u32 assigned_dev_id;
+ __u32 busnr;
+ __u32 devfn;
+ __u32 flags;
+ __u32 segnr;
+ union {
+ __u32 reserved[11];
+ };
+};
+
+The PCI device is specified by the triple segnr, busnr, and devfn.
+Identification in succeeding service requests is done via assigned_dev_id. The
+following flags are specified:
+
+/* Depends on KVM_CAP_IOMMU */
+#define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0)
+
+4.49 KVM_DEASSIGN_PCI_DEVICE
+
+Capability: KVM_CAP_DEVICE_DEASSIGNMENT
+Architectures: x86 ia64
+Type: vm ioctl
+Parameters: struct kvm_assigned_pci_dev (in)
+Returns: 0 on success, -1 on error
+
+Ends PCI device assignment, releasing all associated resources.
+
+See KVM_CAP_DEVICE_ASSIGNMENT for the data structure. Only assigned_dev_id is
+used in kvm_assigned_pci_dev to identify the device.
+
+4.50 KVM_ASSIGN_DEV_IRQ
+
+Capability: KVM_CAP_ASSIGN_DEV_IRQ
+Architectures: x86 ia64
+Type: vm ioctl
+Parameters: struct kvm_assigned_irq (in)
+Returns: 0 on success, -1 on error
+
+Assigns an IRQ to a passed-through device.
+
+struct kvm_assigned_irq {
+ __u32 assigned_dev_id;
+ __u32 host_irq;
+ __u32 guest_irq;
+ __u32 flags;
+ union {
+ struct {
+ __u32 addr_lo;
+ __u32 addr_hi;
+ __u32 data;
+ } guest_msi;
+ __u32 reserved[12];
+ };
+};
+
+The following flags are defined:
+
+#define KVM_DEV_IRQ_HOST_INTX (1 << 0)
+#define KVM_DEV_IRQ_HOST_MSI (1 << 1)
+#define KVM_DEV_IRQ_HOST_MSIX (1 << 2)
+
+#define KVM_DEV_IRQ_GUEST_INTX (1 << 8)
+#define KVM_DEV_IRQ_GUEST_MSI (1 << 9)
+#define KVM_DEV_IRQ_GUEST_MSIX (1 << 10)
+
+It is not valid to specify multiple types per host or guest IRQ. However, the
+IRQ type of host and guest can differ or can even be null.
+
+4.51 KVM_DEASSIGN_DEV_IRQ
+
+Capability: KVM_CAP_ASSIGN_DEV_IRQ
+Architectures: x86 ia64
+Type: vm ioctl
+Parameters: struct kvm_assigned_irq (in)
+Returns: 0 on success, -1 on error
+
+Ends an IRQ assignment to a passed-through device.
+
+See KVM_ASSIGN_DEV_IRQ for the data structure. The target device is specified
+by assigned_dev_id, flags must correspond to the IRQ type specified on
+KVM_ASSIGN_DEV_IRQ. Partial deassignment of host or guest IRQ is allowed.
+
+4.52 KVM_SET_GSI_ROUTING
+
+Capability: KVM_CAP_IRQ_ROUTING
+Architectures: x86 ia64
+Type: vm ioctl
+Parameters: struct kvm_irq_routing (in)
+Returns: 0 on success, -1 on error
+
+Sets the GSI routing table entries, overwriting any previously set entries.
+
+struct kvm_irq_routing {
+ __u32 nr;
+ __u32 flags;
+ struct kvm_irq_routing_entry entries[0];
+};
+
+No flags are specified so far, the corresponding field must be set to zero.
+
+struct kvm_irq_routing_entry {
+ __u32 gsi;
+ __u32 type;
+ __u32 flags;
+ __u32 pad;
+ union {
+ struct kvm_irq_routing_irqchip irqchip;
+ struct kvm_irq_routing_msi msi;
+ __u32 pad[8];
+ } u;
+};
+
+/* gsi routing entry types */
+#define KVM_IRQ_ROUTING_IRQCHIP 1
+#define KVM_IRQ_ROUTING_MSI 2
+
+No flags are specified so far, the corresponding field must be set to zero.
+
+struct kvm_irq_routing_irqchip {
+ __u32 irqchip;
+ __u32 pin;
+};
+
+struct kvm_irq_routing_msi {
+ __u32 address_lo;
+ __u32 address_hi;
+ __u32 data;
+ __u32 pad;
+};
+
+4.53 KVM_ASSIGN_SET_MSIX_NR
+
+Capability: KVM_CAP_DEVICE_MSIX
+Architectures: x86 ia64
+Type: vm ioctl
+Parameters: struct kvm_assigned_msix_nr (in)
+Returns: 0 on success, -1 on error
+
+Set the number of MSI-X interrupts for an assigned device. This service can
+only be called once in the lifetime of an assigned device.
+
+struct kvm_assigned_msix_nr {
+ __u32 assigned_dev_id;
+ __u16 entry_nr;
+ __u16 padding;
+};
+
+#define KVM_MAX_MSIX_PER_DEV 256
+
+4.54 KVM_ASSIGN_SET_MSIX_ENTRY
+
+Capability: KVM_CAP_DEVICE_MSIX
+Architectures: x86 ia64
+Type: vm ioctl
+Parameters: struct kvm_assigned_msix_entry (in)
+Returns: 0 on success, -1 on error
+
+Specifies the routing of an MSI-X assigned device interrupt to a GSI. Setting
+the GSI vector to zero means disabling the interrupt.
+
+struct kvm_assigned_msix_entry {
+ __u32 assigned_dev_id;
+ __u32 gsi;
+ __u16 entry; /* The index of entry in the MSI-X table */
+ __u16 padding[3];
+};
+
+5. The kvm_run structure
+
+Application code obtains a pointer to the kvm_run structure by
+mmap()ing a vcpu fd. From that point, application code can control
+execution by changing fields in kvm_run prior to calling the KVM_RUN
+ioctl, and obtain information about the reason KVM_RUN returned by
+looking up structure members.
+
+struct kvm_run {
+ /* in */
+ __u8 request_interrupt_window;
+
+Request that KVM_RUN return when it becomes possible to inject external
+interrupts into the guest. Useful in conjunction with KVM_INTERRUPT.
+
+ __u8 padding1[7];
+
+ /* out */
+ __u32 exit_reason;
+
+When KVM_RUN has returned successfully (return value 0), this informs
+application code why KVM_RUN has returned. Allowable values for this
+field are detailed below.
+
+ __u8 ready_for_interrupt_injection;
+
+If request_interrupt_window has been specified, this field indicates
+an interrupt can be injected now with KVM_INTERRUPT.
+
+ __u8 if_flag;
+
+The value of the current interrupt flag. Only valid if in-kernel
+local APIC is not used.
+
+ __u8 padding2[2];
+
+ /* in (pre_kvm_run), out (post_kvm_run) */
+ __u64 cr8;
+
+The value of the cr8 register. Only valid if in-kernel local APIC is
+not used. Both input and output.
+
+ __u64 apic_base;
+
+The value of the APIC BASE msr. Only valid if in-kernel local
+APIC is not used. Both input and output.
+
+ union {
+ /* KVM_EXIT_UNKNOWN */
+ struct {
+ __u64 hardware_exit_reason;
+ } hw;
+
+If exit_reason is KVM_EXIT_UNKNOWN, the vcpu has exited due to unknown
+reasons. Further architecture-specific information is available in
+hardware_exit_reason.
+
+ /* KVM_EXIT_FAIL_ENTRY */
+ struct {
+ __u64 hardware_entry_failure_reason;
+ } fail_entry;
+
+If exit_reason is KVM_EXIT_FAIL_ENTRY, the vcpu could not be run due
+to unknown reasons. Further architecture-specific information is
+available in hardware_entry_failure_reason.
+
+ /* KVM_EXIT_EXCEPTION */
+ struct {
+ __u32 exception;
+ __u32 error_code;
+ } ex;
+
+Unused.
+
+ /* KVM_EXIT_IO */
+ struct {
+#define KVM_EXIT_IO_IN 0
+#define KVM_EXIT_IO_OUT 1
+ __u8 direction;
+ __u8 size; /* bytes */
+ __u16 port;
+ __u32 count;
+ __u64 data_offset; /* relative to kvm_run start */
+ } io;
+
+If exit_reason is KVM_EXIT_IO, then the vcpu has
+executed a port I/O instruction which could not be satisfied by kvm.
+data_offset describes where the data is located (KVM_EXIT_IO_OUT) or
+where kvm expects application code to place the data for the next
+KVM_RUN invocation (KVM_EXIT_IO_IN). Data format is a packed array.
+
+ struct {
+ struct kvm_debug_exit_arch arch;
+ } debug;
+
+Unused.
+
+ /* KVM_EXIT_MMIO */
+ struct {
+ __u64 phys_addr;
+ __u8 data[8];
+ __u32 len;
+ __u8 is_write;
+ } mmio;
+
+If exit_reason is KVM_EXIT_MMIO, then the vcpu has
+executed a memory-mapped I/O instruction which could not be satisfied
+by kvm. The 'data' member contains the written data if 'is_write' is
+true, and should be filled by application code otherwise.
+
+NOTE: For KVM_EXIT_IO, KVM_EXIT_MMIO and KVM_EXIT_OSI, the corresponding
+operations are complete (and guest state is consistent) only after userspace
+has re-entered the kernel with KVM_RUN. The kernel side will first finish
+incomplete operations and then check for pending signals. Userspace
+can re-enter the guest with an unmasked signal pending to complete
+pending operations.
+
+ /* KVM_EXIT_HYPERCALL */
+ struct {
+ __u64 nr;
+ __u64 args[6];
+ __u64 ret;
+ __u32 longmode;
+ __u32 pad;
+ } hypercall;
+
+Unused. This was once used for 'hypercall to userspace'. To implement
+such functionality, use KVM_EXIT_IO (x86) or KVM_EXIT_MMIO (all except s390).
+Note KVM_EXIT_IO is significantly faster than KVM_EXIT_MMIO.
+
+ /* KVM_EXIT_TPR_ACCESS */
+ struct {
+ __u64 rip;
+ __u32 is_write;
+ __u32 pad;
+ } tpr_access;
+
+To be documented (KVM_TPR_ACCESS_REPORTING).
+
+ /* KVM_EXIT_S390_SIEIC */
+ struct {
+ __u8 icptcode;
+ __u64 mask; /* psw upper half */
+ __u64 addr; /* psw lower half */
+ __u16 ipa;
+ __u32 ipb;
+ } s390_sieic;
+
+s390 specific.
+
+ /* KVM_EXIT_S390_RESET */
+#define KVM_S390_RESET_POR 1
+#define KVM_S390_RESET_CLEAR 2
+#define KVM_S390_RESET_SUBSYSTEM 4
+#define KVM_S390_RESET_CPU_INIT 8
+#define KVM_S390_RESET_IPL 16
+ __u64 s390_reset_flags;
+
+s390 specific.
+
+ /* KVM_EXIT_DCR */
+ struct {
+ __u32 dcrn;
+ __u32 data;
+ __u8 is_write;
+ } dcr;
+
+powerpc specific.
+
+ /* KVM_EXIT_OSI */
+ struct {
+ __u64 gprs[32];
+ } osi;
+
+MOL uses a special hypercall interface it calls 'OSI'. To enable it, we catch
+hypercalls and exit with this exit struct that contains all the guest gprs.
+
+If exit_reason is KVM_EXIT_OSI, then the vcpu has triggered such a hypercall.
+Userspace can now handle the hypercall and when it's done modify the gprs as
+necessary. Upon guest entry all guest GPRs will then be replaced by the values
+in this struct.
+
+ /* Fix the size of the union. */
+ char padding[256];
+ };
+};
--- /dev/null
+KVM CPUID bits
+Glauber Costa <glommer@redhat.com>, Red Hat Inc, 2010
+=====================================================
+
+A guest running on a kvm host, can check some of its features using
+cpuid. This is not always guaranteed to work, since userspace can
+mask-out some, or even all KVM-related cpuid features before launching
+a guest.
+
+KVM cpuid functions are:
+
+function: KVM_CPUID_SIGNATURE (0x40000000)
+returns : eax = 0,
+ ebx = 0x4b4d564b,
+ ecx = 0x564b4d56,
+ edx = 0x4d.
+Note that this value in ebx, ecx and edx corresponds to the string "KVMKVMKVM".
+This function queries the presence of KVM cpuid leafs.
+
+
+function: define KVM_CPUID_FEATURES (0x40000001)
+returns : ebx, ecx, edx = 0
+ eax = and OR'ed group of (1 << flag), where each flags is:
+
+
+flag || value || meaning
+=============================================================================
+KVM_FEATURE_CLOCKSOURCE || 0 || kvmclock available at msrs
+ || || 0x11 and 0x12.
+------------------------------------------------------------------------------
+KVM_FEATURE_NOP_IO_DELAY || 1 || not necessary to perform delays
+ || || on PIO operations.
+------------------------------------------------------------------------------
+KVM_FEATURE_MMU_OP || 2 || deprecated.
+------------------------------------------------------------------------------
+KVM_FEATURE_CLOCKSOURCE2 || 3 || kvmclock available at msrs
+ || || 0x4b564d00 and 0x4b564d01
+------------------------------------------------------------------------------
+KVM_FEATURE_ASYNC_PF || 4 || async pf can be enabled by
+ || || writing to msr 0x4b564d02
+------------------------------------------------------------------------------
+KVM_FEATURE_CLOCKSOURCE_STABLE_BIT || 24 || host will warn if no guest-side
+ || || per-cpu warps are expected in
+ || || kvmclock.
+------------------------------------------------------------------------------
--- /dev/null
+KVM Lock Overview
+=================
+
+1. Acquisition Orders
+---------------------
+
+(to be written)
+
+2. Reference
+------------
+
+Name: kvm_lock
+Type: raw_spinlock
+Arch: any
+Protects: - vm_list
+ - hardware virtualization enable/disable
+Comment: 'raw' because hardware enabling/disabling must be atomic /wrt
+ migration.
+
+Name: kvm_arch::tsc_write_lock
+Type: raw_spinlock
+Arch: x86
+Protects: - kvm_arch::{last_tsc_write,last_tsc_nsec,last_tsc_offset}
+ - tsc offset in vmcb
+Comment: 'raw' because updating the tsc offsets must not be preempted.
--- /dev/null
+The x86 kvm shadow mmu
+======================
+
+The mmu (in arch/x86/kvm, files mmu.[ch] and paging_tmpl.h) is responsible
+for presenting a standard x86 mmu to the guest, while translating guest
+physical addresses to host physical addresses.
+
+The mmu code attempts to satisfy the following requirements:
+
+- correctness: the guest should not be able to determine that it is running
+ on an emulated mmu except for timing (we attempt to comply
+ with the specification, not emulate the characteristics of
+ a particular implementation such as tlb size)
+- security: the guest must not be able to touch host memory not assigned
+ to it
+- performance: minimize the performance penalty imposed by the mmu
+- scaling: need to scale to large memory and large vcpu guests
+- hardware: support the full range of x86 virtualization hardware
+- integration: Linux memory management code must be in control of guest memory
+ so that swapping, page migration, page merging, transparent
+ hugepages, and similar features work without change
+- dirty tracking: report writes to guest memory to enable live migration
+ and framebuffer-based displays
+- footprint: keep the amount of pinned kernel memory low (most memory
+ should be shrinkable)
+- reliability: avoid multipage or GFP_ATOMIC allocations
+
+Acronyms
+========
+
+pfn host page frame number
+hpa host physical address
+hva host virtual address
+gfn guest frame number
+gpa guest physical address
+gva guest virtual address
+ngpa nested guest physical address
+ngva nested guest virtual address
+pte page table entry (used also to refer generically to paging structure
+ entries)
+gpte guest pte (referring to gfns)
+spte shadow pte (referring to pfns)
+tdp two dimensional paging (vendor neutral term for NPT and EPT)
+
+Virtual and real hardware supported
+===================================
+
+The mmu supports first-generation mmu hardware, which allows an atomic switch
+of the current paging mode and cr3 during guest entry, as well as
+two-dimensional paging (AMD's NPT and Intel's EPT). The emulated hardware
+it exposes is the traditional 2/3/4 level x86 mmu, with support for global
+pages, pae, pse, pse36, cr0.wp, and 1GB pages. Work is in progress to support
+exposing NPT capable hardware on NPT capable hosts.
+
+Translation
+===========
+
+The primary job of the mmu is to program the processor's mmu to translate
+addresses for the guest. Different translations are required at different
+times:
+
+- when guest paging is disabled, we translate guest physical addresses to
+ host physical addresses (gpa->hpa)
+- when guest paging is enabled, we translate guest virtual addresses, to
+ guest physical addresses, to host physical addresses (gva->gpa->hpa)
+- when the guest launches a guest of its own, we translate nested guest
+ virtual addresses, to nested guest physical addresses, to guest physical
+ addresses, to host physical addresses (ngva->ngpa->gpa->hpa)
+
+The primary challenge is to encode between 1 and 3 translations into hardware
+that support only 1 (traditional) and 2 (tdp) translations. When the
+number of required translations matches the hardware, the mmu operates in
+direct mode; otherwise it operates in shadow mode (see below).
+
+Memory
+======
+
+Guest memory (gpa) is part of the user address space of the process that is
+using kvm. Userspace defines the translation between guest addresses and user
+addresses (gpa->hva); note that two gpas may alias to the same hva, but not
+vice versa.
+
+These hvas may be backed using any method available to the host: anonymous
+memory, file backed memory, and device memory. Memory might be paged by the
+host at any time.
+
+Events
+======
+
+The mmu is driven by events, some from the guest, some from the host.
+
+Guest generated events:
+- writes to control registers (especially cr3)
+- invlpg/invlpga instruction execution
+- access to missing or protected translations
+
+Host generated events:
+- changes in the gpa->hpa translation (either through gpa->hva changes or
+ through hva->hpa changes)
+- memory pressure (the shrinker)
+
+Shadow pages
+============
+
+The principal data structure is the shadow page, 'struct kvm_mmu_page'. A
+shadow page contains 512 sptes, which can be either leaf or nonleaf sptes. A
+shadow page may contain a mix of leaf and nonleaf sptes.
+
+A nonleaf spte allows the hardware mmu to reach the leaf pages and
+is not related to a translation directly. It points to other shadow pages.
+
+A leaf spte corresponds to either one or two translations encoded into
+one paging structure entry. These are always the lowest level of the
+translation stack, with optional higher level translations left to NPT/EPT.
+Leaf ptes point at guest pages.
+
+The following table shows translations encoded by leaf ptes, with higher-level
+translations in parentheses:
+
+ Non-nested guests:
+ nonpaging: gpa->hpa
+ paging: gva->gpa->hpa
+ paging, tdp: (gva->)gpa->hpa
+ Nested guests:
+ non-tdp: ngva->gpa->hpa (*)
+ tdp: (ngva->)ngpa->gpa->hpa
+
+(*) the guest hypervisor will encode the ngva->gpa translation into its page
+ tables if npt is not present
+
+Shadow pages contain the following information:
+ role.level:
+ The level in the shadow paging hierarchy that this shadow page belongs to.
+ 1=4k sptes, 2=2M sptes, 3=1G sptes, etc.
+ role.direct:
+ If set, leaf sptes reachable from this page are for a linear range.
+ Examples include real mode translation, large guest pages backed by small
+ host pages, and gpa->hpa translations when NPT or EPT is active.
+ The linear range starts at (gfn << PAGE_SHIFT) and its size is determined
+ by role.level (2MB for first level, 1GB for second level, 0.5TB for third
+ level, 256TB for fourth level)
+ If clear, this page corresponds to a guest page table denoted by the gfn
+ field.
+ role.quadrant:
+ When role.cr4_pae=0, the guest uses 32-bit gptes while the host uses 64-bit
+ sptes. That means a guest page table contains more ptes than the host,
+ so multiple shadow pages are needed to shadow one guest page.
+ For first-level shadow pages, role.quadrant can be 0 or 1 and denotes the
+ first or second 512-gpte block in the guest page table. For second-level
+ page tables, each 32-bit gpte is converted to two 64-bit sptes
+ (since each first-level guest page is shadowed by two first-level
+ shadow pages) so role.quadrant takes values in the range 0..3. Each
+ quadrant maps 1GB virtual address space.
+ role.access:
+ Inherited guest access permissions in the form uwx. Note execute
+ permission is positive, not negative.
+ role.invalid:
+ The page is invalid and should not be used. It is a root page that is
+ currently pinned (by a cpu hardware register pointing to it); once it is
+ unpinned it will be destroyed.
+ role.cr4_pae:
+ Contains the value of cr4.pae for which the page is valid (e.g. whether
+ 32-bit or 64-bit gptes are in use).
+ role.nxe:
+ Contains the value of efer.nxe for which the page is valid.
+ role.cr0_wp:
+ Contains the value of cr0.wp for which the page is valid.
+ gfn:
+ Either the guest page table containing the translations shadowed by this
+ page, or the base page frame for linear translations. See role.direct.
+ spt:
+ A pageful of 64-bit sptes containing the translations for this page.
+ Accessed by both kvm and hardware.
+ The page pointed to by spt will have its page->private pointing back
+ at the shadow page structure.
+ sptes in spt point either at guest pages, or at lower-level shadow pages.
+ Specifically, if sp1 and sp2 are shadow pages, then sp1->spt[n] may point
+ at __pa(sp2->spt). sp2 will point back at sp1 through parent_pte.
+ The spt array forms a DAG structure with the shadow page as a node, and
+ guest pages as leaves.
+ gfns:
+ An array of 512 guest frame numbers, one for each present pte. Used to
+ perform a reverse map from a pte to a gfn. When role.direct is set, any
+ element of this array can be calculated from the gfn field when used, in
+ this case, the array of gfns is not allocated. See role.direct and gfn.
+ slot_bitmap:
+ A bitmap containing one bit per memory slot. If the page contains a pte
+ mapping a page from memory slot n, then bit n of slot_bitmap will be set
+ (if a page is aliased among several slots, then it is not guaranteed that
+ all slots will be marked).
+ Used during dirty logging to avoid scanning a shadow page if none if its
+ pages need tracking.
+ root_count:
+ A counter keeping track of how many hardware registers (guest cr3 or
+ pdptrs) are now pointing at the page. While this counter is nonzero, the
+ page cannot be destroyed. See role.invalid.
+ multimapped:
+ Whether there exist multiple sptes pointing at this page.
+ parent_pte/parent_ptes:
+ If multimapped is zero, parent_pte points at the single spte that points at
+ this page's spt. Otherwise, parent_ptes points at a data structure
+ with a list of parent_ptes.
+ unsync:
+ If true, then the translations in this page may not match the guest's
+ translation. This is equivalent to the state of the tlb when a pte is
+ changed but before the tlb entry is flushed. Accordingly, unsync ptes
+ are synchronized when the guest executes invlpg or flushes its tlb by
+ other means. Valid for leaf pages.
+ unsync_children:
+ How many sptes in the page point at pages that are unsync (or have
+ unsynchronized children).
+ unsync_child_bitmap:
+ A bitmap indicating which sptes in spt point (directly or indirectly) at
+ pages that may be unsynchronized. Used to quickly locate all unsychronized
+ pages reachable from a given page.
+
+Reverse map
+===========
+
+The mmu maintains a reverse mapping whereby all ptes mapping a page can be
+reached given its gfn. This is used, for example, when swapping out a page.
+
+Synchronized and unsynchronized pages
+=====================================
+
+The guest uses two events to synchronize its tlb and page tables: tlb flushes
+and page invalidations (invlpg).
+
+A tlb flush means that we need to synchronize all sptes reachable from the
+guest's cr3. This is expensive, so we keep all guest page tables write
+protected, and synchronize sptes to gptes when a gpte is written.
+
+A special case is when a guest page table is reachable from the current
+guest cr3. In this case, the guest is obliged to issue an invlpg instruction
+before using the translation. We take advantage of that by removing write
+protection from the guest page, and allowing the guest to modify it freely.
+We synchronize modified gptes when the guest invokes invlpg. This reduces
+the amount of emulation we have to do when the guest modifies multiple gptes,
+or when the a guest page is no longer used as a page table and is used for
+random guest data.
+
+As a side effect we have to resynchronize all reachable unsynchronized shadow
+pages on a tlb flush.
+
+
+Reaction to events
+==================
+
+- guest page fault (or npt page fault, or ept violation)
+
+This is the most complicated event. The cause of a page fault can be:
+
+ - a true guest fault (the guest translation won't allow the access) (*)
+ - access to a missing translation
+ - access to a protected translation
+ - when logging dirty pages, memory is write protected
+ - synchronized shadow pages are write protected (*)
+ - access to untranslatable memory (mmio)
+
+ (*) not applicable in direct mode
+
+Handling a page fault is performed as follows:
+
+ - if needed, walk the guest page tables to determine the guest translation
+ (gva->gpa or ngpa->gpa)
+ - if permissions are insufficient, reflect the fault back to the guest
+ - determine the host page
+ - if this is an mmio request, there is no host page; call the emulator
+ to emulate the instruction instead
+ - walk the shadow page table to find the spte for the translation,
+ instantiating missing intermediate page tables as necessary
+ - try to unsynchronize the page
+ - if successful, we can let the guest continue and modify the gpte
+ - emulate the instruction
+ - if failed, unshadow the page and let the guest continue
+ - update any translations that were modified by the instruction
+
+invlpg handling:
+
+ - walk the shadow page hierarchy and drop affected translations
+ - try to reinstantiate the indicated translation in the hope that the
+ guest will use it in the near future
+
+Guest control register updates:
+
+- mov to cr3
+ - look up new shadow roots
+ - synchronize newly reachable shadow pages
+
+- mov to cr0/cr4/efer
+ - set up mmu context for new paging mode
+ - look up new shadow roots
+ - synchronize newly reachable shadow pages
+
+Host translation updates:
+
+ - mmu notifier called with updated hva
+ - look up affected sptes through reverse map
+ - drop (or update) translations
+
+Emulating cr0.wp
+================
+
+If tdp is not enabled, the host must keep cr0.wp=1 so page write protection
+works for the guest kernel, not guest guest userspace. When the guest
+cr0.wp=1, this does not present a problem. However when the guest cr0.wp=0,
+we cannot map the permissions for gpte.u=1, gpte.w=0 to any spte (the
+semantics require allowing any guest kernel access plus user read access).
+
+We handle this by mapping the permissions to two possible sptes, depending
+on fault type:
+
+- kernel write fault: spte.u=0, spte.w=1 (allows full kernel access,
+ disallows user access)
+- read fault: spte.u=1, spte.w=0 (allows full read access, disallows kernel
+ write access)
+
+(user write faults generate a #PF)
+
+Large pages
+===========
+
+The mmu supports all combinations of large and small guest and host pages.
+Supported page sizes include 4k, 2M, 4M, and 1G. 4M pages are treated as
+two separate 2M pages, on both guest and host, since the mmu always uses PAE
+paging.
+
+To instantiate a large spte, four constraints must be satisfied:
+
+- the spte must point to a large host page
+- the guest pte must be a large pte of at least equivalent size (if tdp is
+ enabled, there is no guest pte and this condition is satisified)
+- if the spte will be writeable, the large page frame may not overlap any
+ write-protected pages
+- the guest page must be wholly contained by a single memory slot
+
+To check the last two conditions, the mmu maintains a ->write_count set of
+arrays for each memory slot and large page size. Every write protected page
+causes its write_count to be incremented, thus preventing instantiation of
+a large spte. The frames at the end of an unaligned memory slot have
+artificically inflated ->write_counts so they can never be instantiated.
+
+Further reading
+===============
+
+- NPT presentation from KVM Forum 2008
+ http://www.linux-kvm.org/wiki/images/c/c8/KvmForum2008%24kdf2008_21.pdf
+
--- /dev/null
+KVM-specific MSRs.
+Glauber Costa <glommer@redhat.com>, Red Hat Inc, 2010
+=====================================================
+
+KVM makes use of some custom MSRs to service some requests.
+
+Custom MSRs have a range reserved for them, that goes from
+0x4b564d00 to 0x4b564dff. There are MSRs outside this area,
+but they are deprecated and their use is discouraged.
+
+Custom MSR list
+--------
+
+The current supported Custom MSR list is:
+
+MSR_KVM_WALL_CLOCK_NEW: 0x4b564d00
+
+ data: 4-byte alignment physical address of a memory area which must be
+ in guest RAM. This memory is expected to hold a copy of the following
+ structure:
+
+ struct pvclock_wall_clock {
+ u32 version;
+ u32 sec;
+ u32 nsec;
+ } __attribute__((__packed__));
+
+ whose data will be filled in by the hypervisor. The hypervisor is only
+ guaranteed to update this data at the moment of MSR write.
+ Users that want to reliably query this information more than once have
+ to write more than once to this MSR. Fields have the following meanings:
+
+ version: guest has to check version before and after grabbing
+ time information and check that they are both equal and even.
+ An odd version indicates an in-progress update.
+
+ sec: number of seconds for wallclock.
+
+ nsec: number of nanoseconds for wallclock.
+
+ Note that although MSRs are per-CPU entities, the effect of this
+ particular MSR is global.
+
+ Availability of this MSR must be checked via bit 3 in 0x4000001 cpuid
+ leaf prior to usage.
+
+MSR_KVM_SYSTEM_TIME_NEW: 0x4b564d01
+
+ data: 4-byte aligned physical address of a memory area which must be in
+ guest RAM, plus an enable bit in bit 0. This memory is expected to hold
+ a copy of the following structure:
+
+ struct pvclock_vcpu_time_info {
+ u32 version;
+ u32 pad0;
+ u64 tsc_timestamp;
+ u64 system_time;
+ u32 tsc_to_system_mul;
+ s8 tsc_shift;
+ u8 flags;
+ u8 pad[2];
+ } __attribute__((__packed__)); /* 32 bytes */
+
+ whose data will be filled in by the hypervisor periodically. Only one
+ write, or registration, is needed for each VCPU. The interval between
+ updates of this structure is arbitrary and implementation-dependent.
+ The hypervisor may update this structure at any time it sees fit until
+ anything with bit0 == 0 is written to it.
+
+ Fields have the following meanings:
+
+ version: guest has to check version before and after grabbing
+ time information and check that they are both equal and even.
+ An odd version indicates an in-progress update.
+
+ tsc_timestamp: the tsc value at the current VCPU at the time
+ of the update of this structure. Guests can subtract this value
+ from current tsc to derive a notion of elapsed time since the
+ structure update.
+
+ system_time: a host notion of monotonic time, including sleep
+ time at the time this structure was last updated. Unit is
+ nanoseconds.
+
+ tsc_to_system_mul: a function of the tsc frequency. One has
+ to multiply any tsc-related quantity by this value to get
+ a value in nanoseconds, besides dividing by 2^tsc_shift
+
+ tsc_shift: cycle to nanosecond divider, as a power of two, to
+ allow for shift rights. One has to shift right any tsc-related
+ quantity by this value to get a value in nanoseconds, besides
+ multiplying by tsc_to_system_mul.
+
+ With this information, guests can derive per-CPU time by
+ doing:
+
+ time = (current_tsc - tsc_timestamp)
+ time = (time * tsc_to_system_mul) >> tsc_shift
+ time = time + system_time
+
+ flags: bits in this field indicate extended capabilities
+ coordinated between the guest and the hypervisor. Availability
+ of specific flags has to be checked in 0x40000001 cpuid leaf.
+ Current flags are:
+
+ flag bit | cpuid bit | meaning
+ -------------------------------------------------------------
+ | | time measures taken across
+ 0 | 24 | multiple cpus are guaranteed to
+ | | be monotonic
+ -------------------------------------------------------------
+
+ Availability of this MSR must be checked via bit 3 in 0x4000001 cpuid
+ leaf prior to usage.
+
+
+MSR_KVM_WALL_CLOCK: 0x11
+
+ data and functioning: same as MSR_KVM_WALL_CLOCK_NEW. Use that instead.
+
+ This MSR falls outside the reserved KVM range and may be removed in the
+ future. Its usage is deprecated.
+
+ Availability of this MSR must be checked via bit 0 in 0x4000001 cpuid
+ leaf prior to usage.
+
+MSR_KVM_SYSTEM_TIME: 0x12
+
+ data and functioning: same as MSR_KVM_SYSTEM_TIME_NEW. Use that instead.
+
+ This MSR falls outside the reserved KVM range and may be removed in the
+ future. Its usage is deprecated.
+
+ Availability of this MSR must be checked via bit 0 in 0x4000001 cpuid
+ leaf prior to usage.
+
+ The suggested algorithm for detecting kvmclock presence is then:
+
+ if (!kvm_para_available()) /* refer to cpuid.txt */
+ return NON_PRESENT;
+
+ flags = cpuid_eax(0x40000001);
+ if (flags & 3) {
+ msr_kvm_system_time = MSR_KVM_SYSTEM_TIME_NEW;
+ msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK_NEW;
+ return PRESENT;
+ } else if (flags & 0) {
+ msr_kvm_system_time = MSR_KVM_SYSTEM_TIME;
+ msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK;
+ return PRESENT;
+ } else
+ return NON_PRESENT;
+
+MSR_KVM_ASYNC_PF_EN: 0x4b564d02
+ data: Bits 63-6 hold 64-byte aligned physical address of a
+ 64 byte memory area which must be in guest RAM and must be
+ zeroed. Bits 5-2 are reserved and should be zero. Bit 0 is 1
+ when asynchronous page faults are enabled on the vcpu 0 when
+ disabled. Bit 2 is 1 if asynchronous page faults can be injected
+ when vcpu is in cpl == 0.
+
+ First 4 byte of 64 byte memory location will be written to by
+ the hypervisor at the time of asynchronous page fault (APF)
+ injection to indicate type of asynchronous page fault. Value
+ of 1 means that the page referred to by the page fault is not
+ present. Value 2 means that the page is now available. Disabling
+ interrupt inhibits APFs. Guest must not enable interrupt
+ before the reason is read, or it may be overwritten by another
+ APF. Since APF uses the same exception vector as regular page
+ fault guest must reset the reason to 0 before it does
+ something that can generate normal page fault. If during page
+ fault APF reason is 0 it means that this is regular page
+ fault.
+
+ During delivery of type 1 APF cr2 contains a token that will
+ be used to notify a guest when missing page becomes
+ available. When page becomes available type 2 APF is sent with
+ cr2 set to the token associated with the page. There is special
+ kind of token 0xffffffff which tells vcpu that it should wake
+ up all processes waiting for APFs and no individual type 2 APFs
+ will be sent.
+
+ If APF is disabled while there are outstanding APFs, they will
+ not be delivered.
+
+ Currently type 2 APF will be always delivered on the same vcpu as
+ type 1 was, but guest should not rely on that.
--- /dev/null
+The PPC KVM paravirtual interface
+=================================
+
+The basic execution principle by which KVM on PowerPC works is to run all kernel
+space code in PR=1 which is user space. This way we trap all privileged
+instructions and can emulate them accordingly.
+
+Unfortunately that is also the downfall. There are quite some privileged
+instructions that needlessly return us to the hypervisor even though they
+could be handled differently.
+
+This is what the PPC PV interface helps with. It takes privileged instructions
+and transforms them into unprivileged ones with some help from the hypervisor.
+This cuts down virtualization costs by about 50% on some of my benchmarks.
+
+The code for that interface can be found in arch/powerpc/kernel/kvm*
+
+Querying for existence
+======================
+
+To find out if we're running on KVM or not, we leverage the device tree. When
+Linux is running on KVM, a node /hypervisor exists. That node contains a
+compatible property with the value "linux,kvm".
+
+Once you determined you're running under a PV capable KVM, you can now use
+hypercalls as described below.
+
+KVM hypercalls
+==============
+
+Inside the device tree's /hypervisor node there's a property called
+'hypercall-instructions'. This property contains at most 4 opcodes that make
+up the hypercall. To call a hypercall, just call these instructions.
+
+The parameters are as follows:
+
+ Register IN OUT
+
+ r0 - volatile
+ r3 1st parameter Return code
+ r4 2nd parameter 1st output value
+ r5 3rd parameter 2nd output value
+ r6 4th parameter 3rd output value
+ r7 5th parameter 4th output value
+ r8 6th parameter 5th output value
+ r9 7th parameter 6th output value
+ r10 8th parameter 7th output value
+ r11 hypercall number 8th output value
+ r12 - volatile
+
+Hypercall definitions are shared in generic code, so the same hypercall numbers
+apply for x86 and powerpc alike with the exception that each KVM hypercall
+also needs to be ORed with the KVM vendor code which is (42 << 16).
+
+Return codes can be as follows:
+
+ Code Meaning
+
+ 0 Success
+ 12 Hypercall not implemented
+ <0 Error
+
+The magic page
+==============
+
+To enable communication between the hypervisor and guest there is a new shared
+page that contains parts of supervisor visible register state. The guest can
+map this shared page using the KVM hypercall KVM_HC_PPC_MAP_MAGIC_PAGE.
+
+With this hypercall issued the guest always gets the magic page mapped at the
+desired location in effective and physical address space. For now, we always
+map the page to -4096. This way we can access it using absolute load and store
+functions. The following instruction reads the first field of the magic page:
+
+ ld rX, -4096(0)
+
+The interface is designed to be extensible should there be need later to add
+additional registers to the magic page. If you add fields to the magic page,
+also define a new hypercall feature to indicate that the host can give you more
+registers. Only if the host supports the additional features, make use of them.
+
+The magic page has the following layout as described in
+arch/powerpc/include/asm/kvm_para.h:
+
+struct kvm_vcpu_arch_shared {
+ __u64 scratch1;
+ __u64 scratch2;
+ __u64 scratch3;
+ __u64 critical; /* Guest may not get interrupts if == r1 */
+ __u64 sprg0;
+ __u64 sprg1;
+ __u64 sprg2;
+ __u64 sprg3;
+ __u64 srr0;
+ __u64 srr1;
+ __u64 dar;
+ __u64 msr;
+ __u32 dsisr;
+ __u32 int_pending; /* Tells the guest if we have an interrupt */
+};
+
+Additions to the page must only occur at the end. Struct fields are always 32
+or 64 bit aligned, depending on them being 32 or 64 bit wide respectively.
+
+Magic page features
+===================
+
+When mapping the magic page using the KVM hypercall KVM_HC_PPC_MAP_MAGIC_PAGE,
+a second return value is passed to the guest. This second return value contains
+a bitmap of available features inside the magic page.
+
+The following enhancements to the magic page are currently available:
+
+ KVM_MAGIC_FEAT_SR Maps SR registers r/w in the magic page
+
+For enhanced features in the magic page, please check for the existence of the
+feature before using them!
+
+MSR bits
+========
+
+The MSR contains bits that require hypervisor intervention and bits that do
+not require direct hypervisor intervention because they only get interpreted
+when entering the guest or don't have any impact on the hypervisor's behavior.
+
+The following bits are safe to be set inside the guest:
+
+ MSR_EE
+ MSR_RI
+ MSR_CR
+ MSR_ME
+
+If any other bit changes in the MSR, please still use mtmsr(d).
+
+Patched instructions
+====================
+
+The "ld" and "std" instructions are transormed to "lwz" and "stw" instructions
+respectively on 32 bit systems with an added offset of 4 to accommodate for big
+endianness.
+
+The following is a list of mapping the Linux kernel performs when running as
+guest. Implementing any of those mappings is optional, as the instruction traps
+also act on the shared page. So calling privileged instructions still works as
+before.
+
+From To
+==== ==
+
+mfmsr rX ld rX, magic_page->msr
+mfsprg rX, 0 ld rX, magic_page->sprg0
+mfsprg rX, 1 ld rX, magic_page->sprg1
+mfsprg rX, 2 ld rX, magic_page->sprg2
+mfsprg rX, 3 ld rX, magic_page->sprg3
+mfsrr0 rX ld rX, magic_page->srr0
+mfsrr1 rX ld rX, magic_page->srr1
+mfdar rX ld rX, magic_page->dar
+mfdsisr rX lwz rX, magic_page->dsisr
+
+mtmsr rX std rX, magic_page->msr
+mtsprg 0, rX std rX, magic_page->sprg0
+mtsprg 1, rX std rX, magic_page->sprg1
+mtsprg 2, rX std rX, magic_page->sprg2
+mtsprg 3, rX std rX, magic_page->sprg3
+mtsrr0 rX std rX, magic_page->srr0
+mtsrr1 rX std rX, magic_page->srr1
+mtdar rX std rX, magic_page->dar
+mtdsisr rX stw rX, magic_page->dsisr
+
+tlbsync nop
+
+mtmsrd rX, 0 b <special mtmsr section>
+mtmsr rX b <special mtmsr section>
+
+mtmsrd rX, 1 b <special mtmsrd section>
+
+[Book3S only]
+mtsrin rX, rY b <special mtsrin section>
+
+[BookE only]
+wrteei [0|1] b <special wrteei section>
+
+
+Some instructions require more logic to determine what's going on than a load
+or store instruction can deliver. To enable patching of those, we keep some
+RAM around where we can live translate instructions to. What happens is the
+following:
+
+ 1) copy emulation code to memory
+ 2) patch that code to fit the emulated instruction
+ 3) patch that code to return to the original pc + 4
+ 4) patch the original instruction to branch to the new code
+
+That way we can inject an arbitrary amount of code as replacement for a single
+instruction. This allows us to check for pending interrupts when setting EE=1
+for example.
--- /dev/null
+Review checklist for kvm patches
+================================
+
+1. The patch must follow Documentation/CodingStyle and
+ Documentation/SubmittingPatches.
+
+2. Patches should be against kvm.git master branch.
+
+3. If the patch introduces or modifies a new userspace API:
+ - the API must be documented in Documentation/kvm/api.txt
+ - the API must be discoverable using KVM_CHECK_EXTENSION
+
+4. New state must include support for save/restore.
+
+5. New features must default to off (userspace should explicitly request them).
+ Performance improvements can and should default to on.
+
+6. New cpu features should be exposed via KVM_GET_SUPPORTED_CPUID2
+
+7. Emulator changes should be accompanied by unit tests for qemu-kvm.git
+ kvm/test directory.
+
+8. Changes should be vendor neutral when possible. Changes to common code
+ are better than duplicating changes to vendor code.
+
+9. Similarly, prefer changes to arch independent code than to arch dependent
+ code.
+
+10. User/kernel interfaces and guest/host interfaces must be 64-bit clean
+ (all variables and sizes naturally aligned on 64-bit; use specific types
+ only - u64 rather than ulong).
+
+11. New guest visible features must either be documented in a hardware manual
+ or be accompanied by documentation.
+
+12. Features must be robust against reset and kexec - for example, shared
+ host/guest memory must be unshared to prevent the host from writing to
+ guest memory that the guest has not reserved for this purpose.
--- /dev/null
+
+ Timekeeping Virtualization for X86-Based Architectures
+
+ Zachary Amsden <zamsden@redhat.com>
+ Copyright (c) 2010, Red Hat. All rights reserved.
+
+1) Overview
+2) Timing Devices
+3) TSC Hardware
+4) Virtualization Problems
+
+=========================================================================
+
+1) Overview
+
+One of the most complicated parts of the X86 platform, and specifically,
+the virtualization of this platform is the plethora of timing devices available
+and the complexity of emulating those devices. In addition, virtualization of
+time introduces a new set of challenges because it introduces a multiplexed
+division of time beyond the control of the guest CPU.
+
+First, we will describe the various timekeeping hardware available, then
+present some of the problems which arise and solutions available, giving
+specific recommendations for certain classes of KVM guests.
+
+The purpose of this document is to collect data and information relevant to
+timekeeping which may be difficult to find elsewhere, specifically,
+information relevant to KVM and hardware-based virtualization.
+
+=========================================================================
+
+2) Timing Devices
+
+First we discuss the basic hardware devices available. TSC and the related
+KVM clock are special enough to warrant a full exposition and are described in
+the following section.
+
+2.1) i8254 - PIT
+
+One of the first timer devices available is the programmable interrupt timer,
+or PIT. The PIT has a fixed frequency 1.193182 MHz base clock and three
+channels which can be programmed to deliver periodic or one-shot interrupts.
+These three channels can be configured in different modes and have individual
+counters. Channel 1 and 2 were not available for general use in the original
+IBM PC, and historically were connected to control RAM refresh and the PC
+speaker. Now the PIT is typically integrated as part of an emulated chipset
+and a separate physical PIT is not used.
+
+The PIT uses I/O ports 0x40 - 0x43. Access to the 16-bit counters is done
+using single or multiple byte access to the I/O ports. There are 6 modes
+available, but not all modes are available to all timers, as only timer 2
+has a connected gate input, required for modes 1 and 5. The gate line is
+controlled by port 61h, bit 0, as illustrated in the following diagram.
+
+ -------------- ----------------
+| | | |
+| 1.1932 MHz |---------->| CLOCK OUT | ---------> IRQ 0
+| Clock | | | |
+ -------------- | +->| GATE TIMER 0 |
+ | ----------------
+ |
+ | ----------------
+ | | |
+ |------>| CLOCK OUT | ---------> 66.3 KHZ DRAM
+ | | | (aka /dev/null)
+ | +->| GATE TIMER 1 |
+ | ----------------
+ |
+ | ----------------
+ | | |
+ |------>| CLOCK OUT | ---------> Port 61h, bit 5
+ | | |
+Port 61h, bit 0 ---------->| GATE TIMER 2 | \_.---- ____
+ ---------------- _| )--|LPF|---Speaker
+ / *---- \___/
+Port 61h, bit 1 -----------------------------------/
+
+The timer modes are now described.
+
+Mode 0: Single Timeout. This is a one-shot software timeout that counts down
+ when the gate is high (always true for timers 0 and 1). When the count
+ reaches zero, the output goes high.
+
+Mode 1: Triggered One-shot. The output is initially set high. When the gate
+ line is set high, a countdown is initiated (which does not stop if the gate is
+ lowered), during which the output is set low. When the count reaches zero,
+ the output goes high.
+
+Mode 2: Rate Generator. The output is initially set high. When the countdown
+ reaches 1, the output goes low for one count and then returns high. The value
+ is reloaded and the countdown automatically resumes. If the gate line goes
+ low, the count is halted. If the output is low when the gate is lowered, the
+ output automatically goes high (this only affects timer 2).
+
+Mode 3: Square Wave. This generates a high / low square wave. The count
+ determines the length of the pulse, which alternates between high and low
+ when zero is reached. The count only proceeds when gate is high and is
+ automatically reloaded on reaching zero. The count is decremented twice at
+ each clock to generate a full high / low cycle at the full periodic rate.
+ If the count is even, the clock remains high for N/2 counts and low for N/2
+ counts; if the clock is odd, the clock is high for (N+1)/2 counts and low
+ for (N-1)/2 counts. Only even values are latched by the counter, so odd
+ values are not observed when reading. This is the intended mode for timer 2,
+ which generates sine-like tones by low-pass filtering the square wave output.
+
+Mode 4: Software Strobe. After programming this mode and loading the counter,
+ the output remains high until the counter reaches zero. Then the output
+ goes low for 1 clock cycle and returns high. The counter is not reloaded.
+ Counting only occurs when gate is high.
+
+Mode 5: Hardware Strobe. After programming and loading the counter, the
+ output remains high. When the gate is raised, a countdown is initiated
+ (which does not stop if the gate is lowered). When the counter reaches zero,
+ the output goes low for 1 clock cycle and then returns high. The counter is
+ not reloaded.
+
+In addition to normal binary counting, the PIT supports BCD counting. The
+command port, 0x43 is used to set the counter and mode for each of the three
+timers.
+
+PIT commands, issued to port 0x43, using the following bit encoding:
+
+Bit 7-4: Command (See table below)
+Bit 3-1: Mode (000 = Mode 0, 101 = Mode 5, 11X = undefined)
+Bit 0 : Binary (0) / BCD (1)
+
+Command table:
+
+0000 - Latch Timer 0 count for port 0x40
+ sample and hold the count to be read in port 0x40;
+ additional commands ignored until counter is read;
+ mode bits ignored.
+
+0001 - Set Timer 0 LSB mode for port 0x40
+ set timer to read LSB only and force MSB to zero;
+ mode bits set timer mode
+
+0010 - Set Timer 0 MSB mode for port 0x40
+ set timer to read MSB only and force LSB to zero;
+ mode bits set timer mode
+
+0011 - Set Timer 0 16-bit mode for port 0x40
+ set timer to read / write LSB first, then MSB;
+ mode bits set timer mode
+
+0100 - Latch Timer 1 count for port 0x41 - as described above
+0101 - Set Timer 1 LSB mode for port 0x41 - as described above
+0110 - Set Timer 1 MSB mode for port 0x41 - as described above
+0111 - Set Timer 1 16-bit mode for port 0x41 - as described above
+
+1000 - Latch Timer 2 count for port 0x42 - as described above
+1001 - Set Timer 2 LSB mode for port 0x42 - as described above
+1010 - Set Timer 2 MSB mode for port 0x42 - as described above
+1011 - Set Timer 2 16-bit mode for port 0x42 as described above
+
+1101 - General counter latch
+ Latch combination of counters into corresponding ports
+ Bit 3 = Counter 2
+ Bit 2 = Counter 1
+ Bit 1 = Counter 0
+ Bit 0 = Unused
+
+1110 - Latch timer status
+ Latch combination of counter mode into corresponding ports
+ Bit 3 = Counter 2
+ Bit 2 = Counter 1
+ Bit 1 = Counter 0
+
+ The output of ports 0x40-0x42 following this command will be:
+
+ Bit 7 = Output pin
+ Bit 6 = Count loaded (0 if timer has expired)
+ Bit 5-4 = Read / Write mode
+ 01 = MSB only
+ 10 = LSB only
+ 11 = LSB / MSB (16-bit)
+ Bit 3-1 = Mode
+ Bit 0 = Binary (0) / BCD mode (1)
+
+2.2) RTC
+
+The second device which was available in the original PC was the MC146818 real
+time clock. The original device is now obsolete, and usually emulated by the
+system chipset, sometimes by an HPET and some frankenstein IRQ routing.
+
+The RTC is accessed through CMOS variables, which uses an index register to
+control which bytes are read. Since there is only one index register, read
+of the CMOS and read of the RTC require lock protection (in addition, it is
+dangerous to allow userspace utilities such as hwclock to have direct RTC
+access, as they could corrupt kernel reads and writes of CMOS memory).
+
+The RTC generates an interrupt which is usually routed to IRQ 8. The interrupt
+can function as a periodic timer, an additional once a day alarm, and can issue
+interrupts after an update of the CMOS registers by the MC146818 is complete.
+The type of interrupt is signalled in the RTC status registers.
+
+The RTC will update the current time fields by battery power even while the
+system is off. The current time fields should not be read while an update is
+in progress, as indicated in the status register.
+
+The clock uses a 32.768kHz crystal, so bits 6-4 of register A should be
+programmed to a 32kHz divider if the RTC is to count seconds.
+
+This is the RAM map originally used for the RTC/CMOS:
+
+Location Size Description
+------------------------------------------
+00h byte Current second (BCD)
+01h byte Seconds alarm (BCD)
+02h byte Current minute (BCD)
+03h byte Minutes alarm (BCD)
+04h byte Current hour (BCD)
+05h byte Hours alarm (BCD)
+06h byte Current day of week (BCD)
+07h byte Current day of month (BCD)
+08h byte Current month (BCD)
+09h byte Current year (BCD)
+0Ah byte Register A
+ bit 7 = Update in progress
+ bit 6-4 = Divider for clock
+ 000 = 4.194 MHz
+ 001 = 1.049 MHz
+ 010 = 32 kHz
+ 10X = test modes
+ 110 = reset / disable
+ 111 = reset / disable
+ bit 3-0 = Rate selection for periodic interrupt
+ 000 = periodic timer disabled
+ 001 = 3.90625 uS
+ 010 = 7.8125 uS
+ 011 = .122070 mS
+ 100 = .244141 mS
+ ...
+ 1101 = 125 mS
+ 1110 = 250 mS
+ 1111 = 500 mS
+0Bh byte Register B
+ bit 7 = Run (0) / Halt (1)
+ bit 6 = Periodic interrupt enable
+ bit 5 = Alarm interrupt enable
+ bit 4 = Update-ended interrupt enable
+ bit 3 = Square wave interrupt enable
+ bit 2 = BCD calendar (0) / Binary (1)
+ bit 1 = 12-hour mode (0) / 24-hour mode (1)
+ bit 0 = 0 (DST off) / 1 (DST enabled)
+OCh byte Register C (read only)
+ bit 7 = interrupt request flag (IRQF)
+ bit 6 = periodic interrupt flag (PF)
+ bit 5 = alarm interrupt flag (AF)
+ bit 4 = update interrupt flag (UF)
+ bit 3-0 = reserved
+ODh byte Register D (read only)
+ bit 7 = RTC has power
+ bit 6-0 = reserved
+32h byte Current century BCD (*)
+ (*) location vendor specific and now determined from ACPI global tables
+
+2.3) APIC
+
+On Pentium and later processors, an on-board timer is available to each CPU
+as part of the Advanced Programmable Interrupt Controller. The APIC is
+accessed through memory-mapped registers and provides interrupt service to each
+CPU, used for IPIs and local timer interrupts.
+
+Although in theory the APIC is a safe and stable source for local interrupts,
+in practice, many bugs and glitches have occurred due to the special nature of
+the APIC CPU-local memory-mapped hardware. Beware that CPU errata may affect
+the use of the APIC and that workarounds may be required. In addition, some of
+these workarounds pose unique constraints for virtualization - requiring either
+extra overhead incurred from extra reads of memory-mapped I/O or additional
+functionality that may be more computationally expensive to implement.
+
+Since the APIC is documented quite well in the Intel and AMD manuals, we will
+avoid repetition of the detail here. It should be pointed out that the APIC
+timer is programmed through the LVT (local vector timer) register, is capable
+of one-shot or periodic operation, and is based on the bus clock divided down
+by the programmable divider register.
+
+2.4) HPET
+
+HPET is quite complex, and was originally intended to replace the PIT / RTC
+support of the X86 PC. It remains to be seen whether that will be the case, as
+the de facto standard of PC hardware is to emulate these older devices. Some
+systems designated as legacy free may support only the HPET as a hardware timer
+device.
+
+The HPET spec is rather loose and vague, requiring at least 3 hardware timers,
+but allowing implementation freedom to support many more. It also imposes no
+fixed rate on the timer frequency, but does impose some extremal values on
+frequency, error and slew.
+
+In general, the HPET is recommended as a high precision (compared to PIT /RTC)
+time source which is independent of local variation (as there is only one HPET
+in any given system). The HPET is also memory-mapped, and its presence is
+indicated through ACPI tables by the BIOS.
+
+Detailed specification of the HPET is beyond the current scope of this
+document, as it is also very well documented elsewhere.
+
+2.5) Offboard Timers
+
+Several cards, both proprietary (watchdog boards) and commonplace (e1000) have
+timing chips built into the cards which may have registers which are accessible
+to kernel or user drivers. To the author's knowledge, using these to generate
+a clocksource for a Linux or other kernel has not yet been attempted and is in
+general frowned upon as not playing by the agreed rules of the game. Such a
+timer device would require additional support to be virtualized properly and is
+not considered important at this time as no known operating system does this.
+
+=========================================================================
+
+3) TSC Hardware
+
+The TSC or time stamp counter is relatively simple in theory; it counts
+instruction cycles issued by the processor, which can be used as a measure of
+time. In practice, due to a number of problems, it is the most complicated
+timekeeping device to use.
+
+The TSC is represented internally as a 64-bit MSR which can be read with the
+RDMSR, RDTSC, or RDTSCP (when available) instructions. In the past, hardware
+limitations made it possible to write the TSC, but generally on old hardware it
+was only possible to write the low 32-bits of the 64-bit counter, and the upper
+32-bits of the counter were cleared. Now, however, on Intel processors family
+0Fh, for models 3, 4 and 6, and family 06h, models e and f, this restriction
+has been lifted and all 64-bits are writable. On AMD systems, the ability to
+write the TSC MSR is not an architectural guarantee.
+
+The TSC is accessible from CPL-0 and conditionally, for CPL > 0 software by
+means of the CR4.TSD bit, which when enabled, disables CPL > 0 TSC access.
+
+Some vendors have implemented an additional instruction, RDTSCP, which returns
+atomically not just the TSC, but an indicator which corresponds to the
+processor number. This can be used to index into an array of TSC variables to
+determine offset information in SMP systems where TSCs are not synchronized.
+The presence of this instruction must be determined by consulting CPUID feature
+bits.
+
+Both VMX and SVM provide extension fields in the virtualization hardware which
+allows the guest visible TSC to be offset by a constant. Newer implementations
+promise to allow the TSC to additionally be scaled, but this hardware is not
+yet widely available.
+
+3.1) TSC synchronization
+
+The TSC is a CPU-local clock in most implementations. This means, on SMP
+platforms, the TSCs of different CPUs may start at different times depending
+on when the CPUs are powered on. Generally, CPUs on the same die will share
+the same clock, however, this is not always the case.
+
+The BIOS may attempt to resynchronize the TSCs during the poweron process and
+the operating system or other system software may attempt to do this as well.
+Several hardware limitations make the problem worse - if it is not possible to
+write the full 64-bits of the TSC, it may be impossible to match the TSC in
+newly arriving CPUs to that of the rest of the system, resulting in
+unsynchronized TSCs. This may be done by BIOS or system software, but in
+practice, getting a perfectly synchronized TSC will not be possible unless all
+values are read from the same clock, which generally only is possible on single
+socket systems or those with special hardware support.
+
+3.2) TSC and CPU hotplug
+
+As touched on already, CPUs which arrive later than the boot time of the system
+may not have a TSC value that is synchronized with the rest of the system.
+Either system software, BIOS, or SMM code may actually try to establish the TSC
+to a value matching the rest of the system, but a perfect match is usually not
+a guarantee. This can have the effect of bringing a system from a state where
+TSC is synchronized back to a state where TSC synchronization flaws, however
+small, may be exposed to the OS and any virtualization environment.
+
+3.3) TSC and multi-socket / NUMA
+
+Multi-socket systems, especially large multi-socket systems are likely to have
+individual clocksources rather than a single, universally distributed clock.
+Since these clocks are driven by different crystals, they will not have
+perfectly matched frequency, and temperature and electrical variations will
+cause the CPU clocks, and thus the TSCs to drift over time. Depending on the
+exact clock and bus design, the drift may or may not be fixed in absolute
+error, and may accumulate over time.
+
+In addition, very large systems may deliberately slew the clocks of individual
+cores. This technique, known as spread-spectrum clocking, reduces EMI at the
+clock frequency and harmonics of it, which may be required to pass FCC
+standards for telecommunications and computer equipment.
+
+It is recommended not to trust the TSCs to remain synchronized on NUMA or
+multiple socket systems for these reasons.
+
+3.4) TSC and C-states
+
+C-states, or idling states of the processor, especially C1E and deeper sleep
+states may be problematic for TSC as well. The TSC may stop advancing in such
+a state, resulting in a TSC which is behind that of other CPUs when execution
+is resumed. Such CPUs must be detected and flagged by the operating system
+based on CPU and chipset identifications.
+
+The TSC in such a case may be corrected by catching it up to a known external
+clocksource.
+
+3.5) TSC frequency change / P-states
+
+To make things slightly more interesting, some CPUs may change frequency. They
+may or may not run the TSC at the same rate, and because the frequency change
+may be staggered or slewed, at some points in time, the TSC rate may not be
+known other than falling within a range of values. In this case, the TSC will
+not be a stable time source, and must be calibrated against a known, stable,
+external clock to be a usable source of time.
+
+Whether the TSC runs at a constant rate or scales with the P-state is model
+dependent and must be determined by inspecting CPUID, chipset or vendor
+specific MSR fields.
+
+In addition, some vendors have known bugs where the P-state is actually
+compensated for properly during normal operation, but when the processor is
+inactive, the P-state may be raised temporarily to service cache misses from
+other processors. In such cases, the TSC on halted CPUs could advance faster
+than that of non-halted processors. AMD Turion processors are known to have
+this problem.
+
+3.6) TSC and STPCLK / T-states
+
+External signals given to the processor may also have the effect of stopping
+the TSC. This is typically done for thermal emergency power control to prevent
+an overheating condition, and typically, there is no way to detect that this
+condition has happened.
+
+3.7) TSC virtualization - VMX
+
+VMX provides conditional trapping of RDTSC, RDMSR, WRMSR and RDTSCP
+instructions, which is enough for full virtualization of TSC in any manner. In
+addition, VMX allows passing through the host TSC plus an additional TSC_OFFSET
+field specified in the VMCS. Special instructions must be used to read and
+write the VMCS field.
+
+3.8) TSC virtualization - SVM
+
+SVM provides conditional trapping of RDTSC, RDMSR, WRMSR and RDTSCP
+instructions, which is enough for full virtualization of TSC in any manner. In
+addition, SVM allows passing through the host TSC plus an additional offset
+field specified in the SVM control block.
+
+3.9) TSC feature bits in Linux
+
+In summary, there is no way to guarantee the TSC remains in perfect
+synchronization unless it is explicitly guaranteed by the architecture. Even
+if so, the TSCs in multi-sockets or NUMA systems may still run independently
+despite being locally consistent.
+
+The following feature bits are used by Linux to signal various TSC attributes,
+but they can only be taken to be meaningful for UP or single node systems.
+
+X86_FEATURE_TSC : The TSC is available in hardware
+X86_FEATURE_RDTSCP : The RDTSCP instruction is available
+X86_FEATURE_CONSTANT_TSC : The TSC rate is unchanged with P-states
+X86_FEATURE_NONSTOP_TSC : The TSC does not stop in C-states
+X86_FEATURE_TSC_RELIABLE : TSC sync checks are skipped (VMware)
+
+4) Virtualization Problems
+
+Timekeeping is especially problematic for virtualization because a number of
+challenges arise. The most obvious problem is that time is now shared between
+the host and, potentially, a number of virtual machines. Thus the virtual
+operating system does not run with 100% usage of the CPU, despite the fact that
+it may very well make that assumption. It may expect it to remain true to very
+exacting bounds when interrupt sources are disabled, but in reality only its
+virtual interrupt sources are disabled, and the machine may still be preempted
+at any time. This causes problems as the passage of real time, the injection
+of machine interrupts and the associated clock sources are no longer completely
+synchronized with real time.
+
+This same problem can occur on native harware to a degree, as SMM mode may
+steal cycles from the naturally on X86 systems when SMM mode is used by the
+BIOS, but not in such an extreme fashion. However, the fact that SMM mode may
+cause similar problems to virtualization makes it a good justification for
+solving many of these problems on bare metal.
+
+4.1) Interrupt clocking
+
+One of the most immediate problems that occurs with legacy operating systems
+is that the system timekeeping routines are often designed to keep track of
+time by counting periodic interrupts. These interrupts may come from the PIT
+or the RTC, but the problem is the same: the host virtualization engine may not
+be able to deliver the proper number of interrupts per second, and so guest
+time may fall behind. This is especially problematic if a high interrupt rate
+is selected, such as 1000 HZ, which is unfortunately the default for many Linux
+guests.
+
+There are three approaches to solving this problem; first, it may be possible
+to simply ignore it. Guests which have a separate time source for tracking
+'wall clock' or 'real time' may not need any adjustment of their interrupts to
+maintain proper time. If this is not sufficient, it may be necessary to inject
+additional interrupts into the guest in order to increase the effective
+interrupt rate. This approach leads to complications in extreme conditions,
+where host load or guest lag is too much to compensate for, and thus another
+solution to the problem has risen: the guest may need to become aware of lost
+ticks and compensate for them internally. Although promising in theory, the
+implementation of this policy in Linux has been extremely error prone, and a
+number of buggy variants of lost tick compensation are distributed across
+commonly used Linux systems.
+
+Windows uses periodic RTC clocking as a means of keeping time internally, and
+thus requires interrupt slewing to keep proper time. It does use a low enough
+rate (ed: is it 18.2 Hz?) however that it has not yet been a problem in
+practice.
+
+4.2) TSC sampling and serialization
+
+As the highest precision time source available, the cycle counter of the CPU
+has aroused much interest from developers. As explained above, this timer has
+many problems unique to its nature as a local, potentially unstable and
+potentially unsynchronized source. One issue which is not unique to the TSC,
+but is highlighted because of its very precise nature is sampling delay. By
+definition, the counter, once read is already old. However, it is also
+possible for the counter to be read ahead of the actual use of the result.
+This is a consequence of the superscalar execution of the instruction stream,
+which may execute instructions out of order. Such execution is called
+non-serialized. Forcing serialized execution is necessary for precise
+measurement with the TSC, and requires a serializing instruction, such as CPUID
+or an MSR read.
+
+Since CPUID may actually be virtualized by a trap and emulate mechanism, this
+serialization can pose a performance issue for hardware virtualization. An
+accurate time stamp counter reading may therefore not always be available, and
+it may be necessary for an implementation to guard against "backwards" reads of
+the TSC as seen from other CPUs, even in an otherwise perfectly synchronized
+system.
+
+4.3) Timespec aliasing
+
+Additionally, this lack of serialization from the TSC poses another challenge
+when using results of the TSC when measured against another time source. As
+the TSC is much higher precision, many possible values of the TSC may be read
+while another clock is still expressing the same value.
+
+That is, you may read (T,T+10) while external clock C maintains the same value.
+Due to non-serialized reads, you may actually end up with a range which
+fluctuates - from (T-1.. T+10). Thus, any time calculated from a TSC, but
+calibrated against an external value may have a range of valid values.
+Re-calibrating this computation may actually cause time, as computed after the
+calibration, to go backwards, compared with time computed before the
+calibration.
+
+This problem is particularly pronounced with an internal time source in Linux,
+the kernel time, which is expressed in the theoretically high resolution
+timespec - but which advances in much larger granularity intervals, sometimes
+at the rate of jiffies, and possibly in catchup modes, at a much larger step.
+
+This aliasing requires care in the computation and recalibration of kvmclock
+and any other values derived from TSC computation (such as TSC virtualization
+itself).
+
+4.4) Migration
+
+Migration of a virtual machine raises problems for timekeeping in two ways.
+First, the migration itself may take time, during which interrupts cannot be
+delivered, and after which, the guest time may need to be caught up. NTP may
+be able to help to some degree here, as the clock correction required is
+typically small enough to fall in the NTP-correctable window.
+
+An additional concern is that timers based off the TSC (or HPET, if the raw bus
+clock is exposed) may now be running at different rates, requiring compensation
+in some way in the hypervisor by virtualizing these timers. In addition,
+migrating to a faster machine may preclude the use of a passthrough TSC, as a
+faster clock cannot be made visible to a guest without the potential of time
+advancing faster than usual. A slower clock is less of a problem, as it can
+always be caught up to the original rate. KVM clock avoids these problems by
+simply storing multipliers and offsets against the TSC for the guest to convert
+back into nanosecond resolution values.
+
+4.5) Scheduling
+
+Since scheduling may be based on precise timing and firing of interrupts, the
+scheduling algorithms of an operating system may be adversely affected by
+virtualization. In theory, the effect is random and should be universally
+distributed, but in contrived as well as real scenarios (guest device access,
+causes of virtualization exits, possible context switch), this may not always
+be the case. The effect of this has not been well studied.
+
+In an attempt to work around this, several implementations have provided a
+paravirtualized scheduler clock, which reveals the true amount of CPU time for
+which a virtual machine has been running.
+
+4.6) Watchdogs
+
+Watchdog timers, such as the lock detector in Linux may fire accidentally when
+running under hardware virtualization due to timer interrupts being delayed or
+misinterpretation of the passage of real time. Usually, these warnings are
+spurious and can be ignored, but in some circumstances it may be necessary to
+disable such detection.
+
+4.7) Delays and precision timing
+
+Precise timing and delays may not be possible in a virtualized system. This
+can happen if the system is controlling physical hardware, or issues delays to
+compensate for slower I/O to and from devices. The first issue is not solvable
+in general for a virtualized system; hardware control software can't be
+adequately virtualized without a full real-time operating system, which would
+require an RT aware virtualization platform.
+
+The second issue may cause performance problems, but this is unlikely to be a
+significant issue. In many cases these delays may be eliminated through
+configuration or paravirtualization.
+
+4.8) Covert channels and leaks
+
+In addition to the above problems, time information will inevitably leak to the
+guest about the host in anything but a perfect implementation of virtualized
+time. This may allow the guest to infer the presence of a hypervisor (as in a
+red-pill type detection), and it may allow information to leak between guests
+by using CPU utilization itself as a signalling channel. Preventing such
+problems would require completely isolated virtual time which may not track
+real time any longer. This may be useful in certain security or QA contexts,
+but in general isn't recommended for real-world deployment scenarios.
--- /dev/null
+# This creates the demonstration utility "lguest" which runs a Linux guest.
+# Missing headers? Add "-I../../include -I../../arch/x86/include"
+CFLAGS:=-m32 -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -U_FORTIFY_SOURCE
+
+all: lguest
+
+clean:
+ rm -f lguest
--- /dev/null
+#! /bin/sh
+
+set -e
+
+PREFIX=$1
+shift
+
+trap 'rm -r $TMPDIR' 0
+TMPDIR=`mktemp -d`
+
+exec 3>/dev/null
+for f; do
+ while IFS="
+" read -r LINE; do
+ case "$LINE" in
+ *$PREFIX:[0-9]*:\**)
+ NUM=`echo "$LINE" | sed "s/.*$PREFIX:\([0-9]*\).*/\1/"`
+ if [ -f $TMPDIR/$NUM ]; then
+ echo "$TMPDIR/$NUM already exits prior to $f"
+ exit 1
+ fi
+ exec 3>>$TMPDIR/$NUM
+ echo $f | sed 's,\.\./,,g' > $TMPDIR/.$NUM
+ /bin/echo "$LINE" | sed -e "s/$PREFIX:[0-9]*//" -e "s/:\*/*/" >&3
+ ;;
+ *$PREFIX:[0-9]*)
+ NUM=`echo "$LINE" | sed "s/.*$PREFIX:\([0-9]*\).*/\1/"`
+ if [ -f $TMPDIR/$NUM ]; then
+ echo "$TMPDIR/$NUM already exits prior to $f"
+ exit 1
+ fi
+ exec 3>>$TMPDIR/$NUM
+ echo $f | sed 's,\.\./,,g' > $TMPDIR/.$NUM
+ /bin/echo "$LINE" | sed "s/$PREFIX:[0-9]*//" >&3
+ ;;
+ *:\**)
+ /bin/echo "$LINE" | sed -e "s/:\*/*/" -e "s,/\*\*/,," >&3
+ echo >&3
+ exec 3>/dev/null
+ ;;
+ *)
+ /bin/echo "$LINE" >&3
+ ;;
+ esac
+ done < $f
+ echo >&3
+ exec 3>/dev/null
+done
+
+LASTFILE=""
+for f in $TMPDIR/*; do
+ if [ "$LASTFILE" != $(cat $TMPDIR/.$(basename $f) ) ]; then
+ LASTFILE=$(cat $TMPDIR/.$(basename $f) )
+ echo "[ $LASTFILE ]"
+ fi
+ cat $f
+done
+
--- /dev/null
+/*P:100
+ * This is the Launcher code, a simple program which lays out the "physical"
+ * memory for the new Guest by mapping the kernel image and the virtual
+ * devices, then opens /dev/lguest to tell the kernel about the Guest and
+ * control it.
+:*/
+#define _LARGEFILE64_SOURCE
+#define _GNU_SOURCE
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+#include <err.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <elf.h>
+#include <sys/mman.h>
+#include <sys/param.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/wait.h>
+#include <sys/eventfd.h>
+#include <fcntl.h>
+#include <stdbool.h>
+#include <errno.h>
+#include <ctype.h>
+#include <sys/socket.h>
+#include <sys/ioctl.h>
+#include <sys/time.h>
+#include <time.h>
+#include <netinet/in.h>
+#include <net/if.h>
+#include <linux/sockios.h>
+#include <linux/if_tun.h>
+#include <sys/uio.h>
+#include <termios.h>
+#include <getopt.h>
+#include <assert.h>
+#include <sched.h>
+#include <limits.h>
+#include <stddef.h>
+#include <signal.h>
+#include <pwd.h>
+#include <grp.h>
+
+#include <linux/virtio_config.h>
+#include <linux/virtio_net.h>
+#include <linux/virtio_blk.h>
+#include <linux/virtio_console.h>
+#include <linux/virtio_rng.h>
+#include <linux/virtio_ring.h>
+#include <asm/bootparam.h>
+#include "../../include/linux/lguest_launcher.h"
+/*L:110
+ * We can ignore the 42 include files we need for this program, but I do want
+ * to draw attention to the use of kernel-style types.
+ *
+ * As Linus said, "C is a Spartan language, and so should your naming be." I
+ * like these abbreviations, so we define them here. Note that u64 is always
+ * unsigned long long, which works on all Linux systems: this means that we can
+ * use %llu in printf for any u64.
+ */
+typedef unsigned long long u64;
+typedef uint32_t u32;
+typedef uint16_t u16;
+typedef uint8_t u8;
+/*:*/
+
+#define PAGE_PRESENT 0x7 /* Present, RW, Execute */
+#define BRIDGE_PFX "bridge:"
+#ifndef SIOCBRADDIF
+#define SIOCBRADDIF 0x89a2 /* add interface to bridge */
+#endif
+/* We can have up to 256 pages for devices. */
+#define DEVICE_PAGES 256
+/* This will occupy 3 pages: it must be a power of 2. */
+#define VIRTQUEUE_NUM 256
+
+/*L:120
+ * verbose is both a global flag and a macro. The C preprocessor allows
+ * this, and although I wouldn't recommend it, it works quite nicely here.
+ */
+static bool verbose;
+#define verbose(args...) \
+ do { if (verbose) printf(args); } while(0)
+/*:*/
+
+/* The pointer to the start of guest memory. */
+static void *guest_base;
+/* The maximum guest physical address allowed, and maximum possible. */
+static unsigned long guest_limit, guest_max;
+/* The /dev/lguest file descriptor. */
+static int lguest_fd;
+
+/* a per-cpu variable indicating whose vcpu is currently running */
+static unsigned int __thread cpu_id;
+
+/* This is our list of devices. */
+struct device_list {
+ /* Counter to assign interrupt numbers. */
+ unsigned int next_irq;
+
+ /* Counter to print out convenient device numbers. */
+ unsigned int device_num;
+
+ /* The descriptor page for the devices. */
+ u8 *descpage;
+
+ /* A single linked list of devices. */
+ struct device *dev;
+ /* And a pointer to the last device for easy append. */
+ struct device *lastdev;
+};
+
+/* The list of Guest devices, based on command line arguments. */
+static struct device_list devices;
+
+/* The device structure describes a single device. */
+struct device {
+ /* The linked-list pointer. */
+ struct device *next;
+
+ /* The device's descriptor, as mapped into the Guest. */
+ struct lguest_device_desc *desc;
+
+ /* We can't trust desc values once Guest has booted: we use these. */
+ unsigned int feature_len;
+ unsigned int num_vq;
+
+ /* The name of this device, for --verbose. */
+ const char *name;
+
+ /* Any queues attached to this device */
+ struct virtqueue *vq;
+
+ /* Is it operational */
+ bool running;
+
+ /* Does Guest want an intrrupt on empty? */
+ bool irq_on_empty;
+
+ /* Device-specific data. */
+ void *priv;
+};
+
+/* The virtqueue structure describes a queue attached to a device. */
+struct virtqueue {
+ struct virtqueue *next;
+
+ /* Which device owns me. */
+ struct device *dev;
+
+ /* The configuration for this queue. */
+ struct lguest_vqconfig config;
+
+ /* The actual ring of buffers. */
+ struct vring vring;
+
+ /* Last available index we saw. */
+ u16 last_avail_idx;
+
+ /* How many are used since we sent last irq? */
+ unsigned int pending_used;
+
+ /* Eventfd where Guest notifications arrive. */
+ int eventfd;
+
+ /* Function for the thread which is servicing this virtqueue. */
+ void (*service)(struct virtqueue *vq);
+ pid_t thread;
+};
+
+/* Remember the arguments to the program so we can "reboot" */
+static char **main_args;
+
+/* The original tty settings to restore on exit. */
+static struct termios orig_term;
+
+/*
+ * We have to be careful with barriers: our devices are all run in separate
+ * threads and so we need to make sure that changes visible to the Guest happen
+ * in precise order.
+ */
+#define wmb() __asm__ __volatile__("" : : : "memory")
+#define mb() __asm__ __volatile__("" : : : "memory")
+
+/*
+ * Convert an iovec element to the given type.
+ *
+ * This is a fairly ugly trick: we need to know the size of the type and
+ * alignment requirement to check the pointer is kosher. It's also nice to
+ * have the name of the type in case we report failure.
+ *
+ * Typing those three things all the time is cumbersome and error prone, so we
+ * have a macro which sets them all up and passes to the real function.
+ */
+#define convert(iov, type) \
+ ((type *)_convert((iov), sizeof(type), __alignof__(type), #type))
+
+static void *_convert(struct iovec *iov, size_t size, size_t align,
+ const char *name)
+{
+ if (iov->iov_len != size)
+ errx(1, "Bad iovec size %zu for %s", iov->iov_len, name);
+ if ((unsigned long)iov->iov_base % align != 0)
+ errx(1, "Bad alignment %p for %s", iov->iov_base, name);
+ return iov->iov_base;
+}
+
+/* Wrapper for the last available index. Makes it easier to change. */
+#define lg_last_avail(vq) ((vq)->last_avail_idx)
+
+/*
+ * The virtio configuration space is defined to be little-endian. x86 is
+ * little-endian too, but it's nice to be explicit so we have these helpers.
+ */
+#define cpu_to_le16(v16) (v16)
+#define cpu_to_le32(v32) (v32)
+#define cpu_to_le64(v64) (v64)
+#define le16_to_cpu(v16) (v16)
+#define le32_to_cpu(v32) (v32)
+#define le64_to_cpu(v64) (v64)
+
+/* Is this iovec empty? */
+static bool iov_empty(const struct iovec iov[], unsigned int num_iov)
+{
+ unsigned int i;
+
+ for (i = 0; i < num_iov; i++)
+ if (iov[i].iov_len)
+ return false;
+ return true;
+}
+
+/* Take len bytes from the front of this iovec. */
+static void iov_consume(struct iovec iov[], unsigned num_iov, unsigned len)
+{
+ unsigned int i;
+
+ for (i = 0; i < num_iov; i++) {
+ unsigned int used;
+
+ used = iov[i].iov_len < len ? iov[i].iov_len : len;
+ iov[i].iov_base += used;
+ iov[i].iov_len -= used;
+ len -= used;
+ }
+ assert(len == 0);
+}
+
+/* The device virtqueue descriptors are followed by feature bitmasks. */
+static u8 *get_feature_bits(struct device *dev)
+{
+ return (u8 *)(dev->desc + 1)
+ + dev->num_vq * sizeof(struct lguest_vqconfig);
+}
+
+/*L:100
+ * The Launcher code itself takes us out into userspace, that scary place where
+ * pointers run wild and free! Unfortunately, like most userspace programs,
+ * it's quite boring (which is why everyone likes to hack on the kernel!).
+ * Perhaps if you make up an Lguest Drinking Game at this point, it will get
+ * you through this section. Or, maybe not.
+ *
+ * The Launcher sets up a big chunk of memory to be the Guest's "physical"
+ * memory and stores it in "guest_base". In other words, Guest physical ==
+ * Launcher virtual with an offset.
+ *
+ * This can be tough to get your head around, but usually it just means that we
+ * use these trivial conversion functions when the Guest gives us its
+ * "physical" addresses:
+ */
+static void *from_guest_phys(unsigned long addr)
+{
+ return guest_base + addr;
+}
+
+static unsigned long to_guest_phys(const void *addr)
+{
+ return (addr - guest_base);
+}
+
+/*L:130
+ * Loading the Kernel.
+ *
+ * We start with couple of simple helper routines. open_or_die() avoids
+ * error-checking code cluttering the callers:
+ */
+static int open_or_die(const char *name, int flags)
+{
+ int fd = open(name, flags);
+ if (fd < 0)
+ err(1, "Failed to open %s", name);
+ return fd;
+}
+
+/* map_zeroed_pages() takes a number of pages. */
+static void *map_zeroed_pages(unsigned int num)
+{
+ int fd = open_or_die("/dev/zero", O_RDONLY);
+ void *addr;
+
+ /*
+ * We use a private mapping (ie. if we write to the page, it will be
+ * copied). We allocate an extra two pages PROT_NONE to act as guard
+ * pages against read/write attempts that exceed allocated space.
+ */
+ addr = mmap(NULL, getpagesize() * (num+2),
+ PROT_NONE, MAP_PRIVATE, fd, 0);
+
+ if (addr == MAP_FAILED)
+ err(1, "Mmapping %u pages of /dev/zero", num);
+
+ if (mprotect(addr + getpagesize(), getpagesize() * num,
+ PROT_READ|PROT_WRITE) == -1)
+ err(1, "mprotect rw %u pages failed", num);
+
+ /*
+ * One neat mmap feature is that you can close the fd, and it
+ * stays mapped.
+ */
+ close(fd);
+
+ /* Return address after PROT_NONE page */
+ return addr + getpagesize();
+}
+
+/* Get some more pages for a device. */
+static void *get_pages(unsigned int num)
+{
+ void *addr = from_guest_phys(guest_limit);
+
+ guest_limit += num * getpagesize();
+ if (guest_limit > guest_max)
+ errx(1, "Not enough memory for devices");
+ return addr;
+}
+
+/*
+ * This routine is used to load the kernel or initrd. It tries mmap, but if
+ * that fails (Plan 9's kernel file isn't nicely aligned on page boundaries),
+ * it falls back to reading the memory in.
+ */
+static void map_at(int fd, void *addr, unsigned long offset, unsigned long len)
+{
+ ssize_t r;
+
+ /*
+ * We map writable even though for some segments are marked read-only.
+ * The kernel really wants to be writable: it patches its own
+ * instructions.
+ *
+ * MAP_PRIVATE means that the page won't be copied until a write is
+ * done to it. This allows us to share untouched memory between
+ * Guests.
+ */
+ if (mmap(addr, len, PROT_READ|PROT_WRITE,
+ MAP_FIXED|MAP_PRIVATE, fd, offset) != MAP_FAILED)
+ return;
+
+ /* pread does a seek and a read in one shot: saves a few lines. */
+ r = pread(fd, addr, len, offset);
+ if (r != len)
+ err(1, "Reading offset %lu len %lu gave %zi", offset, len, r);
+}
+
+/*
+ * This routine takes an open vmlinux image, which is in ELF, and maps it into
+ * the Guest memory. ELF = Embedded Linking Format, which is the format used
+ * by all modern binaries on Linux including the kernel.
+ *
+ * The ELF headers give *two* addresses: a physical address, and a virtual
+ * address. We use the physical address; the Guest will map itself to the
+ * virtual address.
+ *
+ * We return the starting address.
+ */
+static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr)
+{
+ Elf32_Phdr phdr[ehdr->e_phnum];
+ unsigned int i;
+
+ /*
+ * Sanity checks on the main ELF header: an x86 executable with a
+ * reasonable number of correctly-sized program headers.
+ */
+ if (ehdr->e_type != ET_EXEC
+ || ehdr->e_machine != EM_386
+ || ehdr->e_phentsize != sizeof(Elf32_Phdr)
+ || ehdr->e_phnum < 1 || ehdr->e_phnum > 65536U/sizeof(Elf32_Phdr))
+ errx(1, "Malformed elf header");
+
+ /*
+ * An ELF executable contains an ELF header and a number of "program"
+ * headers which indicate which parts ("segments") of the program to
+ * load where.
+ */
+
+ /* We read in all the program headers at once: */
+ if (lseek(elf_fd, ehdr->e_phoff, SEEK_SET) < 0)
+ err(1, "Seeking to program headers");
+ if (read(elf_fd, phdr, sizeof(phdr)) != sizeof(phdr))
+ err(1, "Reading program headers");
+
+ /*
+ * Try all the headers: there are usually only three. A read-only one,
+ * a read-write one, and a "note" section which we don't load.
+ */
+ for (i = 0; i < ehdr->e_phnum; i++) {
+ /* If this isn't a loadable segment, we ignore it */
+ if (phdr[i].p_type != PT_LOAD)
+ continue;
+
+ verbose("Section %i: size %i addr %p\n",
+ i, phdr[i].p_memsz, (void *)phdr[i].p_paddr);
+
+ /* We map this section of the file at its physical address. */
+ map_at(elf_fd, from_guest_phys(phdr[i].p_paddr),
+ phdr[i].p_offset, phdr[i].p_filesz);
+ }
+
+ /* The entry point is given in the ELF header. */
+ return ehdr->e_entry;
+}
+
+/*L:150
+ * A bzImage, unlike an ELF file, is not meant to be loaded. You're supposed
+ * to jump into it and it will unpack itself. We used to have to perform some
+ * hairy magic because the unpacking code scared me.
+ *
+ * Fortunately, Jeremy Fitzhardinge convinced me it wasn't that hard and wrote
+ * a small patch to jump over the tricky bits in the Guest, so now we just read
+ * the funky header so we know where in the file to load, and away we go!
+ */
+static unsigned long load_bzimage(int fd)
+{
+ struct boot_params boot;
+ int r;
+ /* Modern bzImages get loaded at 1M. */
+ void *p = from_guest_phys(0x100000);
+
+ /*
+ * Go back to the start of the file and read the header. It should be
+ * a Linux boot header (see Documentation/x86/i386/boot.txt)
+ */
+ lseek(fd, 0, SEEK_SET);
+ read(fd, &boot, sizeof(boot));
+
+ /* Inside the setup_hdr, we expect the magic "HdrS" */
+ if (memcmp(&boot.hdr.header, "HdrS", 4) != 0)
+ errx(1, "This doesn't look like a bzImage to me");
+
+ /* Skip over the extra sectors of the header. */
+ lseek(fd, (boot.hdr.setup_sects+1) * 512, SEEK_SET);
+
+ /* Now read everything into memory. in nice big chunks. */
+ while ((r = read(fd, p, 65536)) > 0)
+ p += r;
+
+ /* Finally, code32_start tells us where to enter the kernel. */
+ return boot.hdr.code32_start;
+}
+
+/*L:140
+ * Loading the kernel is easy when it's a "vmlinux", but most kernels
+ * come wrapped up in the self-decompressing "bzImage" format. With a little
+ * work, we can load those, too.
+ */
+static unsigned long load_kernel(int fd)
+{
+ Elf32_Ehdr hdr;
+
+ /* Read in the first few bytes. */
+ if (read(fd, &hdr, sizeof(hdr)) != sizeof(hdr))
+ err(1, "Reading kernel");
+
+ /* If it's an ELF file, it starts with "\177ELF" */
+ if (memcmp(hdr.e_ident, ELFMAG, SELFMAG) == 0)
+ return map_elf(fd, &hdr);
+
+ /* Otherwise we assume it's a bzImage, and try to load it. */
+ return load_bzimage(fd);
+}
+
+/*
+ * This is a trivial little helper to align pages. Andi Kleen hated it because
+ * it calls getpagesize() twice: "it's dumb code."
+ *
+ * Kernel guys get really het up about optimization, even when it's not
+ * necessary. I leave this code as a reaction against that.
+ */
+static inline unsigned long page_align(unsigned long addr)
+{
+ /* Add upwards and truncate downwards. */
+ return ((addr + getpagesize()-1) & ~(getpagesize()-1));
+}
+
+/*L:180
+ * An "initial ram disk" is a disk image loaded into memory along with the
+ * kernel which the kernel can use to boot from without needing any drivers.
+ * Most distributions now use this as standard: the initrd contains the code to
+ * load the appropriate driver modules for the current machine.
+ *
+ * Importantly, James Morris works for RedHat, and Fedora uses initrds for its
+ * kernels. He sent me this (and tells me when I break it).
+ */
+static unsigned long load_initrd(const char *name, unsigned long mem)
+{
+ int ifd;
+ struct stat st;
+ unsigned long len;
+
+ ifd = open_or_die(name, O_RDONLY);
+ /* fstat() is needed to get the file size. */
+ if (fstat(ifd, &st) < 0)
+ err(1, "fstat() on initrd '%s'", name);
+
+ /*
+ * We map the initrd at the top of memory, but mmap wants it to be
+ * page-aligned, so we round the size up for that.
+ */
+ len = page_align(st.st_size);
+ map_at(ifd, from_guest_phys(mem - len), 0, st.st_size);
+ /*
+ * Once a file is mapped, you can close the file descriptor. It's a
+ * little odd, but quite useful.
+ */
+ close(ifd);
+ verbose("mapped initrd %s size=%lu @ %p\n", name, len, (void*)mem-len);
+
+ /* We return the initrd size. */
+ return len;
+}
+/*:*/
+
+/*
+ * Simple routine to roll all the commandline arguments together with spaces
+ * between them.
+ */
+static void concat(char *dst, char *args[])
+{
+ unsigned int i, len = 0;
+
+ for (i = 0; args[i]; i++) {
+ if (i) {
+ strcat(dst+len, " ");
+ len++;
+ }
+ strcpy(dst+len, args[i]);
+ len += strlen(args[i]);
+ }
+ /* In case it's empty. */
+ dst[len] = '\0';
+}
+
+/*L:185
+ * This is where we actually tell the kernel to initialize the Guest. We
+ * saw the arguments it expects when we looked at initialize() in lguest_user.c:
+ * the base of Guest "physical" memory, the top physical page to allow and the
+ * entry point for the Guest.
+ */
+static void tell_kernel(unsigned long start)
+{
+ unsigned long args[] = { LHREQ_INITIALIZE,
+ (unsigned long)guest_base,
+ guest_limit / getpagesize(), start };
+ verbose("Guest: %p - %p (%#lx)\n",
+ guest_base, guest_base + guest_limit, guest_limit);
+ lguest_fd = open_or_die("/dev/lguest", O_RDWR);
+ if (write(lguest_fd, args, sizeof(args)) < 0)
+ err(1, "Writing to /dev/lguest");
+}
+/*:*/
+
+/*L:200
+ * Device Handling.
+ *
+ * When the Guest gives us a buffer, it sends an array of addresses and sizes.
+ * We need to make sure it's not trying to reach into the Launcher itself, so
+ * we have a convenient routine which checks it and exits with an error message
+ * if something funny is going on:
+ */
+static void *_check_pointer(unsigned long addr, unsigned int size,
+ unsigned int line)
+{
+ /*
+ * Check if the requested address and size exceeds the allocated memory,
+ * or addr + size wraps around.
+ */
+ if ((addr + size) > guest_limit || (addr + size) < addr)
+ errx(1, "%s:%i: Invalid address %#lx", __FILE__, line, addr);
+ /*
+ * We return a pointer for the caller's convenience, now we know it's
+ * safe to use.
+ */
+ return from_guest_phys(addr);
+}
+/* A macro which transparently hands the line number to the real function. */
+#define check_pointer(addr,size) _check_pointer(addr, size, __LINE__)
+
+/*
+ * Each buffer in the virtqueues is actually a chain of descriptors. This
+ * function returns the next descriptor in the chain, or vq->vring.num if we're
+ * at the end.
+ */
+static unsigned next_desc(struct vring_desc *desc,
+ unsigned int i, unsigned int max)
+{
+ unsigned int next;
+
+ /* If this descriptor says it doesn't chain, we're done. */
+ if (!(desc[i].flags & VRING_DESC_F_NEXT))
+ return max;
+
+ /* Check they're not leading us off end of descriptors. */
+ next = desc[i].next;
+ /* Make sure compiler knows to grab that: we don't want it changing! */
+ wmb();
+
+ if (next >= max)
+ errx(1, "Desc next is %u", next);
+
+ return next;
+}
+
+/*
+ * This actually sends the interrupt for this virtqueue, if we've used a
+ * buffer.
+ */
+static void trigger_irq(struct virtqueue *vq)
+{
+ unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
+
+ /* Don't inform them if nothing used. */
+ if (!vq->pending_used)
+ return;
+ vq->pending_used = 0;
+
+ /* If they don't want an interrupt, don't send one... */
+ if (vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT) {
+ /* ... unless they've asked us to force one on empty. */
+ if (!vq->dev->irq_on_empty
+ || lg_last_avail(vq) != vq->vring.avail->idx)
+ return;
+ }
+
+ /* Send the Guest an interrupt tell them we used something up. */
+ if (write(lguest_fd, buf, sizeof(buf)) != 0)
+ err(1, "Triggering irq %i", vq->config.irq);
+}
+
+/*
+ * This looks in the virtqueue for the first available buffer, and converts
+ * it to an iovec for convenient access. Since descriptors consist of some
+ * number of output then some number of input descriptors, it's actually two
+ * iovecs, but we pack them into one and note how many of each there were.
+ *
+ * This function waits if necessary, and returns the descriptor number found.
+ */
+static unsigned wait_for_vq_desc(struct virtqueue *vq,
+ struct iovec iov[],
+ unsigned int *out_num, unsigned int *in_num)
+{
+ unsigned int i, head, max;
+ struct vring_desc *desc;
+ u16 last_avail = lg_last_avail(vq);
+
+ /* There's nothing available? */
+ while (last_avail == vq->vring.avail->idx) {
+ u64 event;
+
+ /*
+ * Since we're about to sleep, now is a good time to tell the
+ * Guest about what we've used up to now.
+ */
+ trigger_irq(vq);
+
+ /* OK, now we need to know about added descriptors. */
+ vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
+
+ /*
+ * They could have slipped one in as we were doing that: make
+ * sure it's written, then check again.
+ */
+ mb();
+ if (last_avail != vq->vring.avail->idx) {
+ vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
+ break;
+ }
+
+ /* Nothing new? Wait for eventfd to tell us they refilled. */
+ if (read(vq->eventfd, &event, sizeof(event)) != sizeof(event))
+ errx(1, "Event read failed?");
+
+ /* We don't need to be notified again. */
+ vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
+ }
+
+ /* Check it isn't doing very strange things with descriptor numbers. */
+ if ((u16)(vq->vring.avail->idx - last_avail) > vq->vring.num)
+ errx(1, "Guest moved used index from %u to %u",
+ last_avail, vq->vring.avail->idx);
+
+ /*
+ * Grab the next descriptor number they're advertising, and increment
+ * the index we've seen.
+ */
+ head = vq->vring.avail->ring[last_avail % vq->vring.num];
+ lg_last_avail(vq)++;
+
+ /* If their number is silly, that's a fatal mistake. */
+ if (head >= vq->vring.num)
+ errx(1, "Guest says index %u is available", head);
+
+ /* When we start there are none of either input nor output. */
+ *out_num = *in_num = 0;
+
+ max = vq->vring.num;
+ desc = vq->vring.desc;
+ i = head;
+
+ /*
+ * If this is an indirect entry, then this buffer contains a descriptor
+ * table which we handle as if it's any normal descriptor chain.
+ */
+ if (desc[i].flags & VRING_DESC_F_INDIRECT) {
+ if (desc[i].len % sizeof(struct vring_desc))
+ errx(1, "Invalid size for indirect buffer table");
+
+ max = desc[i].len / sizeof(struct vring_desc);
+ desc = check_pointer(desc[i].addr, desc[i].len);
+ i = 0;
+ }
+
+ do {
+ /* Grab the first descriptor, and check it's OK. */
+ iov[*out_num + *in_num].iov_len = desc[i].len;
+ iov[*out_num + *in_num].iov_base
+ = check_pointer(desc[i].addr, desc[i].len);
+ /* If this is an input descriptor, increment that count. */
+ if (desc[i].flags & VRING_DESC_F_WRITE)
+ (*in_num)++;
+ else {
+ /*
+ * If it's an output descriptor, they're all supposed
+ * to come before any input descriptors.
+ */
+ if (*in_num)
+ errx(1, "Descriptor has out after in");
+ (*out_num)++;
+ }
+
+ /* If we've got too many, that implies a descriptor loop. */
+ if (*out_num + *in_num > max)
+ errx(1, "Looped descriptor");
+ } while ((i = next_desc(desc, i, max)) != max);
+
+ return head;
+}
+
+/*
+ * After we've used one of their buffers, we tell the Guest about it. Sometime
+ * later we'll want to send them an interrupt using trigger_irq(); note that
+ * wait_for_vq_desc() does that for us if it has to wait.
+ */
+static void add_used(struct virtqueue *vq, unsigned int head, int len)
+{
+ struct vring_used_elem *used;
+
+ /*
+ * The virtqueue contains a ring of used buffers. Get a pointer to the
+ * next entry in that used ring.
+ */
+ used = &vq->vring.used->ring[vq->vring.used->idx % vq->vring.num];
+ used->id = head;
+ used->len = len;
+ /* Make sure buffer is written before we update index. */
+ wmb();
+ vq->vring.used->idx++;
+ vq->pending_used++;
+}
+
+/* And here's the combo meal deal. Supersize me! */
+static void add_used_and_trigger(struct virtqueue *vq, unsigned head, int len)
+{
+ add_used(vq, head, len);
+ trigger_irq(vq);
+}
+
+/*
+ * The Console
+ *
+ * We associate some data with the console for our exit hack.
+ */
+struct console_abort {
+ /* How many times have they hit ^C? */
+ int count;
+ /* When did they start? */
+ struct timeval start;
+};
+
+/* This is the routine which handles console input (ie. stdin). */
+static void console_input(struct virtqueue *vq)
+{
+ int len;
+ unsigned int head, in_num, out_num;
+ struct console_abort *abort = vq->dev->priv;
+ struct iovec iov[vq->vring.num];
+
+ /* Make sure there's a descriptor available. */
+ head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
+ if (out_num)
+ errx(1, "Output buffers in console in queue?");
+
+ /* Read into it. This is where we usually wait. */
+ len = readv(STDIN_FILENO, iov, in_num);
+ if (len <= 0) {
+ /* Ran out of input? */
+ warnx("Failed to get console input, ignoring console.");
+ /*
+ * For simplicity, dying threads kill the whole Launcher. So
+ * just nap here.
+ */
+ for (;;)
+ pause();
+ }
+
+ /* Tell the Guest we used a buffer. */
+ add_used_and_trigger(vq, head, len);
+
+ /*
+ * Three ^C within one second? Exit.
+ *
+ * This is such a hack, but works surprisingly well. Each ^C has to
+ * be in a buffer by itself, so they can't be too fast. But we check
+ * that we get three within about a second, so they can't be too
+ * slow.
+ */
+ if (len != 1 || ((char *)iov[0].iov_base)[0] != 3) {
+ abort->count = 0;
+ return;
+ }
+
+ abort->count++;
+ if (abort->count == 1)
+ gettimeofday(&abort->start, NULL);
+ else if (abort->count == 3) {
+ struct timeval now;
+ gettimeofday(&now, NULL);
+ /* Kill all Launcher processes with SIGINT, like normal ^C */
+ if (now.tv_sec <= abort->start.tv_sec+1)
+ kill(0, SIGINT);
+ abort->count = 0;
+ }
+}
+
+/* This is the routine which handles console output (ie. stdout). */
+static void console_output(struct virtqueue *vq)
+{
+ unsigned int head, out, in;
+ struct iovec iov[vq->vring.num];
+
+ /* We usually wait in here, for the Guest to give us something. */
+ head = wait_for_vq_desc(vq, iov, &out, &in);
+ if (in)
+ errx(1, "Input buffers in console output queue?");
+
+ /* writev can return a partial write, so we loop here. */
+ while (!iov_empty(iov, out)) {
+ int len = writev(STDOUT_FILENO, iov, out);
+ if (len <= 0)
+ err(1, "Write to stdout gave %i", len);
+ iov_consume(iov, out, len);
+ }
+
+ /*
+ * We're finished with that buffer: if we're going to sleep,
+ * wait_for_vq_desc() will prod the Guest with an interrupt.
+ */
+ add_used(vq, head, 0);
+}
+
+/*
+ * The Network
+ *
+ * Handling output for network is also simple: we get all the output buffers
+ * and write them to /dev/net/tun.
+ */
+struct net_info {
+ int tunfd;
+};
+
+static void net_output(struct virtqueue *vq)
+{
+ struct net_info *net_info = vq->dev->priv;
+ unsigned int head, out, in;
+ struct iovec iov[vq->vring.num];
+
+ /* We usually wait in here for the Guest to give us a packet. */
+ head = wait_for_vq_desc(vq, iov, &out, &in);
+ if (in)
+ errx(1, "Input buffers in net output queue?");
+ /*
+ * Send the whole thing through to /dev/net/tun. It expects the exact
+ * same format: what a coincidence!
+ */
+ if (writev(net_info->tunfd, iov, out) < 0)
+ errx(1, "Write to tun failed?");
+
+ /*
+ * Done with that one; wait_for_vq_desc() will send the interrupt if
+ * all packets are processed.
+ */
+ add_used(vq, head, 0);
+}
+
+/*
+ * Handling network input is a bit trickier, because I've tried to optimize it.
+ *
+ * First we have a helper routine which tells is if from this file descriptor
+ * (ie. the /dev/net/tun device) will block:
+ */
+static bool will_block(int fd)
+{
+ fd_set fdset;
+ struct timeval zero = { 0, 0 };
+ FD_ZERO(&fdset);
+ FD_SET(fd, &fdset);
+ return select(fd+1, &fdset, NULL, NULL, &zero) != 1;
+}
+
+/*
+ * This handles packets coming in from the tun device to our Guest. Like all
+ * service routines, it gets called again as soon as it returns, so you don't
+ * see a while(1) loop here.
+ */
+static void net_input(struct virtqueue *vq)
+{
+ int len;
+ unsigned int head, out, in;
+ struct iovec iov[vq->vring.num];
+ struct net_info *net_info = vq->dev->priv;
+
+ /*
+ * Get a descriptor to write an incoming packet into. This will also
+ * send an interrupt if they're out of descriptors.
+ */
+ head = wait_for_vq_desc(vq, iov, &out, &in);
+ if (out)
+ errx(1, "Output buffers in net input queue?");
+
+ /*
+ * If it looks like we'll block reading from the tun device, send them
+ * an interrupt.
+ */
+ if (vq->pending_used && will_block(net_info->tunfd))
+ trigger_irq(vq);
+
+ /*
+ * Read in the packet. This is where we normally wait (when there's no
+ * incoming network traffic).
+ */
+ len = readv(net_info->tunfd, iov, in);
+ if (len <= 0)
+ err(1, "Failed to read from tun.");
+
+ /*
+ * Mark that packet buffer as used, but don't interrupt here. We want
+ * to wait until we've done as much work as we can.
+ */
+ add_used(vq, head, len);
+}
+/*:*/
+
+/* This is the helper to create threads: run the service routine in a loop. */
+static int do_thread(void *_vq)
+{
+ struct virtqueue *vq = _vq;
+
+ for (;;)
+ vq->service(vq);
+ return 0;
+}
+
+/*
+ * When a child dies, we kill our entire process group with SIGTERM. This
+ * also has the side effect that the shell restores the console for us!
+ */
+static void kill_launcher(int signal)
+{
+ kill(0, SIGTERM);
+}
+
+static void reset_device(struct device *dev)
+{
+ struct virtqueue *vq;
+
+ verbose("Resetting device %s\n", dev->name);
+
+ /* Clear any features they've acked. */
+ memset(get_feature_bits(dev) + dev->feature_len, 0, dev->feature_len);
+
+ /* We're going to be explicitly killing threads, so ignore them. */
+ signal(SIGCHLD, SIG_IGN);
+
+ /* Zero out the virtqueues, get rid of their threads */
+ for (vq = dev->vq; vq; vq = vq->next) {
+ if (vq->thread != (pid_t)-1) {
+ kill(vq->thread, SIGTERM);
+ waitpid(vq->thread, NULL, 0);
+ vq->thread = (pid_t)-1;
+ }
+ memset(vq->vring.desc, 0,
+ vring_size(vq->config.num, LGUEST_VRING_ALIGN));
+ lg_last_avail(vq) = 0;
+ }
+ dev->running = false;
+
+ /* Now we care if threads die. */
+ signal(SIGCHLD, (void *)kill_launcher);
+}
+
+/*L:216
+ * This actually creates the thread which services the virtqueue for a device.
+ */
+static void create_thread(struct virtqueue *vq)
+{
+ /*
+ * Create stack for thread. Since the stack grows upwards, we point
+ * the stack pointer to the end of this region.
+ */
+ char *stack = malloc(32768);
+ unsigned long args[] = { LHREQ_EVENTFD,
+ vq->config.pfn*getpagesize(), 0 };
+
+ /* Create a zero-initialized eventfd. */
+ vq->eventfd = eventfd(0, 0);
+ if (vq->eventfd < 0)
+ err(1, "Creating eventfd");
+ args[2] = vq->eventfd;
+
+ /*
+ * Attach an eventfd to this virtqueue: it will go off when the Guest
+ * does an LHCALL_NOTIFY for this vq.
+ */
+ if (write(lguest_fd, &args, sizeof(args)) != 0)
+ err(1, "Attaching eventfd");
+
+ /*
+ * CLONE_VM: because it has to access the Guest memory, and SIGCHLD so
+ * we get a signal if it dies.
+ */
+ vq->thread = clone(do_thread, stack + 32768, CLONE_VM | SIGCHLD, vq);
+ if (vq->thread == (pid_t)-1)
+ err(1, "Creating clone");
+
+ /* We close our local copy now the child has it. */
+ close(vq->eventfd);
+}
+
+static bool accepted_feature(struct device *dev, unsigned int bit)
+{
+ const u8 *features = get_feature_bits(dev) + dev->feature_len;
+
+ if (dev->feature_len < bit / CHAR_BIT)
+ return false;
+ return features[bit / CHAR_BIT] & (1 << (bit % CHAR_BIT));
+}
+
+static void start_device(struct device *dev)
+{
+ unsigned int i;
+ struct virtqueue *vq;
+
+ verbose("Device %s OK: offered", dev->name);
+ for (i = 0; i < dev->feature_len; i++)
+ verbose(" %02x", get_feature_bits(dev)[i]);
+ verbose(", accepted");
+ for (i = 0; i < dev->feature_len; i++)
+ verbose(" %02x", get_feature_bits(dev)
+ [dev->feature_len+i]);
+
+ dev->irq_on_empty = accepted_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY);
+
+ for (vq = dev->vq; vq; vq = vq->next) {
+ if (vq->service)
+ create_thread(vq);
+ }
+ dev->running = true;
+}
+
+static void cleanup_devices(void)
+{
+ struct device *dev;
+
+ for (dev = devices.dev; dev; dev = dev->next)
+ reset_device(dev);
+
+ /* If we saved off the original terminal settings, restore them now. */
+ if (orig_term.c_lflag & (ISIG|ICANON|ECHO))
+ tcsetattr(STDIN_FILENO, TCSANOW, &orig_term);
+}
+
+/* When the Guest tells us they updated the status field, we handle it. */
+static void update_device_status(struct device *dev)
+{
+ /* A zero status is a reset, otherwise it's a set of flags. */
+ if (dev->desc->status == 0)
+ reset_device(dev);
+ else if (dev->desc->status & VIRTIO_CONFIG_S_FAILED) {
+ warnx("Device %s configuration FAILED", dev->name);
+ if (dev->running)
+ reset_device(dev);
+ } else if (dev->desc->status & VIRTIO_CONFIG_S_DRIVER_OK) {
+ if (!dev->running)
+ start_device(dev);
+ }
+}
+
+/*L:215
+ * This is the generic routine we call when the Guest uses LHCALL_NOTIFY. In
+ * particular, it's used to notify us of device status changes during boot.
+ */
+static void handle_output(unsigned long addr)
+{
+ struct device *i;
+
+ /* Check each device. */
+ for (i = devices.dev; i; i = i->next) {
+ struct virtqueue *vq;
+
+ /*
+ * Notifications to device descriptors mean they updated the
+ * device status.
+ */
+ if (from_guest_phys(addr) == i->desc) {
+ update_device_status(i);
+ return;
+ }
+
+ /*
+ * Devices *can* be used before status is set to DRIVER_OK.
+ * The original plan was that they would never do this: they
+ * would always finish setting up their status bits before
+ * actually touching the virtqueues. In practice, we allowed
+ * them to, and they do (eg. the disk probes for partition
+ * tables as part of initialization).
+ *
+ * If we see this, we start the device: once it's running, we
+ * expect the device to catch all the notifications.
+ */
+ for (vq = i->vq; vq; vq = vq->next) {
+ if (addr != vq->config.pfn*getpagesize())
+ continue;
+ if (i->running)
+ errx(1, "Notification on running %s", i->name);
+ /* This just calls create_thread() for each virtqueue */
+ start_device(i);
+ return;
+ }
+ }
+
+ /*
+ * Early console write is done using notify on a nul-terminated string
+ * in Guest memory. It's also great for hacking debugging messages
+ * into a Guest.
+ */
+ if (addr >= guest_limit)
+ errx(1, "Bad NOTIFY %#lx", addr);
+
+ write(STDOUT_FILENO, from_guest_phys(addr),
+ strnlen(from_guest_phys(addr), guest_limit - addr));
+}
+
+/*L:190
+ * Device Setup
+ *
+ * All devices need a descriptor so the Guest knows it exists, and a "struct
+ * device" so the Launcher can keep track of it. We have common helper
+ * routines to allocate and manage them.
+ */
+
+/*
+ * The layout of the device page is a "struct lguest_device_desc" followed by a
+ * number of virtqueue descriptors, then two sets of feature bits, then an
+ * array of configuration bytes. This routine returns the configuration
+ * pointer.
+ */
+static u8 *device_config(const struct device *dev)
+{
+ return (void *)(dev->desc + 1)
+ + dev->num_vq * sizeof(struct lguest_vqconfig)
+ + dev->feature_len * 2;
+}
+
+/*
+ * This routine allocates a new "struct lguest_device_desc" from descriptor
+ * table page just above the Guest's normal memory. It returns a pointer to
+ * that descriptor.
+ */
+static struct lguest_device_desc *new_dev_desc(u16 type)
+{
+ struct lguest_device_desc d = { .type = type };
+ void *p;
+
+ /* Figure out where the next device config is, based on the last one. */
+ if (devices.lastdev)
+ p = device_config(devices.lastdev)
+ + devices.lastdev->desc->config_len;
+ else
+ p = devices.descpage;
+
+ /* We only have one page for all the descriptors. */
+ if (p + sizeof(d) > (void *)devices.descpage + getpagesize())
+ errx(1, "Too many devices");
+
+ /* p might not be aligned, so we memcpy in. */
+ return memcpy(p, &d, sizeof(d));
+}
+
+/*
+ * Each device descriptor is followed by the description of its virtqueues. We
+ * specify how many descriptors the virtqueue is to have.
+ */
+static void add_virtqueue(struct device *dev, unsigned int num_descs,
+ void (*service)(struct virtqueue *))
+{
+ unsigned int pages;
+ struct virtqueue **i, *vq = malloc(sizeof(*vq));
+ void *p;
+
+ /* First we need some memory for this virtqueue. */
+ pages = (vring_size(num_descs, LGUEST_VRING_ALIGN) + getpagesize() - 1)
+ / getpagesize();
+ p = get_pages(pages);
+
+ /* Initialize the virtqueue */
+ vq->next = NULL;
+ vq->last_avail_idx = 0;
+ vq->dev = dev;
+
+ /*
+ * This is the routine the service thread will run, and its Process ID
+ * once it's running.
+ */
+ vq->service = service;
+ vq->thread = (pid_t)-1;
+
+ /* Initialize the configuration. */
+ vq->config.num = num_descs;
+ vq->config.irq = devices.next_irq++;
+ vq->config.pfn = to_guest_phys(p) / getpagesize();
+
+ /* Initialize the vring. */
+ vring_init(&vq->vring, num_descs, p, LGUEST_VRING_ALIGN);
+
+ /*
+ * Append virtqueue to this device's descriptor. We use
+ * device_config() to get the end of the device's current virtqueues;
+ * we check that we haven't added any config or feature information
+ * yet, otherwise we'd be overwriting them.
+ */
+ assert(dev->desc->config_len == 0 && dev->desc->feature_len == 0);
+ memcpy(device_config(dev), &vq->config, sizeof(vq->config));
+ dev->num_vq++;
+ dev->desc->num_vq++;
+
+ verbose("Virtqueue page %#lx\n", to_guest_phys(p));
+
+ /*
+ * Add to tail of list, so dev->vq is first vq, dev->vq->next is
+ * second.
+ */
+ for (i = &dev->vq; *i; i = &(*i)->next);
+ *i = vq;
+}
+
+/*
+ * The first half of the feature bitmask is for us to advertise features. The
+ * second half is for the Guest to accept features.
+ */
+static void add_feature(struct device *dev, unsigned bit)
+{
+ u8 *features = get_feature_bits(dev);
+
+ /* We can't extend the feature bits once we've added config bytes */
+ if (dev->desc->feature_len <= bit / CHAR_BIT) {
+ assert(dev->desc->config_len == 0);
+ dev->feature_len = dev->desc->feature_len = (bit/CHAR_BIT) + 1;
+ }
+
+ features[bit / CHAR_BIT] |= (1 << (bit % CHAR_BIT));
+}
+
+/*
+ * This routine sets the configuration fields for an existing device's
+ * descriptor. It only works for the last device, but that's OK because that's
+ * how we use it.
+ */
+static void set_config(struct device *dev, unsigned len, const void *conf)
+{
+ /* Check we haven't overflowed our single page. */
+ if (device_config(dev) + len > devices.descpage + getpagesize())
+ errx(1, "Too many devices");
+
+ /* Copy in the config information, and store the length. */
+ memcpy(device_config(dev), conf, len);
+ dev->desc->config_len = len;
+
+ /* Size must fit in config_len field (8 bits)! */
+ assert(dev->desc->config_len == len);
+}
+
+/*
+ * This routine does all the creation and setup of a new device, including
+ * calling new_dev_desc() to allocate the descriptor and device memory. We
+ * don't actually start the service threads until later.
+ *
+ * See what I mean about userspace being boring?
+ */
+static struct device *new_device(const char *name, u16 type)
+{
+ struct device *dev = malloc(sizeof(*dev));
+
+ /* Now we populate the fields one at a time. */
+ dev->desc = new_dev_desc(type);
+ dev->name = name;
+ dev->vq = NULL;
+ dev->feature_len = 0;
+ dev->num_vq = 0;
+ dev->running = false;
+
+ /*
+ * Append to device list. Prepending to a single-linked list is
+ * easier, but the user expects the devices to be arranged on the bus
+ * in command-line order. The first network device on the command line
+ * is eth0, the first block device /dev/vda, etc.
+ */
+ if (devices.lastdev)
+ devices.lastdev->next = dev;
+ else
+ devices.dev = dev;
+ devices.lastdev = dev;
+
+ return dev;
+}
+
+/*
+ * Our first setup routine is the console. It's a fairly simple device, but
+ * UNIX tty handling makes it uglier than it could be.
+ */
+static void setup_console(void)
+{
+ struct device *dev;
+
+ /* If we can save the initial standard input settings... */
+ if (tcgetattr(STDIN_FILENO, &orig_term) == 0) {
+ struct termios term = orig_term;
+ /*
+ * Then we turn off echo, line buffering and ^C etc: We want a
+ * raw input stream to the Guest.
+ */
+ term.c_lflag &= ~(ISIG|ICANON|ECHO);
+ tcsetattr(STDIN_FILENO, TCSANOW, &term);
+ }
+
+ dev = new_device("console", VIRTIO_ID_CONSOLE);
+
+ /* We store the console state in dev->priv, and initialize it. */
+ dev->priv = malloc(sizeof(struct console_abort));
+ ((struct console_abort *)dev->priv)->count = 0;
+
+ /*
+ * The console needs two virtqueues: the input then the output. When
+ * they put something the input queue, we make sure we're listening to
+ * stdin. When they put something in the output queue, we write it to
+ * stdout.
+ */
+ add_virtqueue(dev, VIRTQUEUE_NUM, console_input);
+ add_virtqueue(dev, VIRTQUEUE_NUM, console_output);
+
+ verbose("device %u: console\n", ++devices.device_num);
+}
+/*:*/
+
+/*M:010
+ * Inter-guest networking is an interesting area. Simplest is to have a
+ * --sharenet=<name> option which opens or creates a named pipe. This can be
+ * used to send packets to another guest in a 1:1 manner.
+ *
+ * More sopisticated is to use one of the tools developed for project like UML
+ * to do networking.
+ *
+ * Faster is to do virtio bonding in kernel. Doing this 1:1 would be
+ * completely generic ("here's my vring, attach to your vring") and would work
+ * for any traffic. Of course, namespace and permissions issues need to be
+ * dealt with. A more sophisticated "multi-channel" virtio_net.c could hide
+ * multiple inter-guest channels behind one interface, although it would
+ * require some manner of hotplugging new virtio channels.
+ *
+ * Finally, we could implement a virtio network switch in the kernel.
+:*/
+
+static u32 str2ip(const char *ipaddr)
+{
+ unsigned int b[4];
+
+ if (sscanf(ipaddr, "%u.%u.%u.%u", &b[0], &b[1], &b[2], &b[3]) != 4)
+ errx(1, "Failed to parse IP address '%s'", ipaddr);
+ return (b[0] << 24) | (b[1] << 16) | (b[2] << 8) | b[3];
+}
+
+static void str2mac(const char *macaddr, unsigned char mac[6])
+{
+ unsigned int m[6];
+ if (sscanf(macaddr, "%02x:%02x:%02x:%02x:%02x:%02x",
+ &m[0], &m[1], &m[2], &m[3], &m[4], &m[5]) != 6)
+ errx(1, "Failed to parse mac address '%s'", macaddr);
+ mac[0] = m[0];
+ mac[1] = m[1];
+ mac[2] = m[2];
+ mac[3] = m[3];
+ mac[4] = m[4];
+ mac[5] = m[5];
+}
+
+/*
+ * This code is "adapted" from libbridge: it attaches the Host end of the
+ * network device to the bridge device specified by the command line.
+ *
+ * This is yet another James Morris contribution (I'm an IP-level guy, so I
+ * dislike bridging), and I just try not to break it.
+ */
+static void add_to_bridge(int fd, const char *if_name, const char *br_name)
+{
+ int ifidx;
+ struct ifreq ifr;
+
+ if (!*br_name)
+ errx(1, "must specify bridge name");
+
+ ifidx = if_nametoindex(if_name);
+ if (!ifidx)
+ errx(1, "interface %s does not exist!", if_name);
+
+ strncpy(ifr.ifr_name, br_name, IFNAMSIZ);
+ ifr.ifr_name[IFNAMSIZ-1] = '\0';
+ ifr.ifr_ifindex = ifidx;
+ if (ioctl(fd, SIOCBRADDIF, &ifr) < 0)
+ err(1, "can't add %s to bridge %s", if_name, br_name);
+}
+
+/*
+ * This sets up the Host end of the network device with an IP address, brings
+ * it up so packets will flow, the copies the MAC address into the hwaddr
+ * pointer.
+ */
+static void configure_device(int fd, const char *tapif, u32 ipaddr)
+{
+ struct ifreq ifr;
+ struct sockaddr_in sin;
+
+ memset(&ifr, 0, sizeof(ifr));
+ strcpy(ifr.ifr_name, tapif);
+
+ /* Don't read these incantations. Just cut & paste them like I did! */
+ sin.sin_family = AF_INET;
+ sin.sin_addr.s_addr = htonl(ipaddr);
+ memcpy(&ifr.ifr_addr, &sin, sizeof(sin));
+ if (ioctl(fd, SIOCSIFADDR, &ifr) != 0)
+ err(1, "Setting %s interface address", tapif);
+ ifr.ifr_flags = IFF_UP;
+ if (ioctl(fd, SIOCSIFFLAGS, &ifr) != 0)
+ err(1, "Bringing interface %s up", tapif);
+}
+
+static int get_tun_device(char tapif[IFNAMSIZ])
+{
+ struct ifreq ifr;
+ int netfd;
+
+ /* Start with this zeroed. Messy but sure. */
+ memset(&ifr, 0, sizeof(ifr));
+
+ /*
+ * We open the /dev/net/tun device and tell it we want a tap device. A
+ * tap device is like a tun device, only somehow different. To tell
+ * the truth, I completely blundered my way through this code, but it
+ * works now!
+ */
+ netfd = open_or_die("/dev/net/tun", O_RDWR);
+ ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_VNET_HDR;
+ strcpy(ifr.ifr_name, "tap%d");
+ if (ioctl(netfd, TUNSETIFF, &ifr) != 0)
+ err(1, "configuring /dev/net/tun");
+
+ if (ioctl(netfd, TUNSETOFFLOAD,
+ TUN_F_CSUM|TUN_F_TSO4|TUN_F_TSO6|TUN_F_TSO_ECN) != 0)
+ err(1, "Could not set features for tun device");
+
+ /*
+ * We don't need checksums calculated for packets coming in this
+ * device: trust us!
+ */
+ ioctl(netfd, TUNSETNOCSUM, 1);
+
+ memcpy(tapif, ifr.ifr_name, IFNAMSIZ);
+ return netfd;
+}
+
+/*L:195
+ * Our network is a Host<->Guest network. This can either use bridging or
+ * routing, but the principle is the same: it uses the "tun" device to inject
+ * packets into the Host as if they came in from a normal network card. We
+ * just shunt packets between the Guest and the tun device.
+ */
+static void setup_tun_net(char *arg)
+{
+ struct device *dev;
+ struct net_info *net_info = malloc(sizeof(*net_info));
+ int ipfd;
+ u32 ip = INADDR_ANY;
+ bool bridging = false;
+ char tapif[IFNAMSIZ], *p;
+ struct virtio_net_config conf;
+
+ net_info->tunfd = get_tun_device(tapif);
+
+ /* First we create a new network device. */
+ dev = new_device("net", VIRTIO_ID_NET);
+ dev->priv = net_info;
+
+ /* Network devices need a recv and a send queue, just like console. */
+ add_virtqueue(dev, VIRTQUEUE_NUM, net_input);
+ add_virtqueue(dev, VIRTQUEUE_NUM, net_output);
+
+ /*
+ * We need a socket to perform the magic network ioctls to bring up the
+ * tap interface, connect to the bridge etc. Any socket will do!
+ */
+ ipfd = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
+ if (ipfd < 0)
+ err(1, "opening IP socket");
+
+ /* If the command line was --tunnet=bridge:<name> do bridging. */
+ if (!strncmp(BRIDGE_PFX, arg, strlen(BRIDGE_PFX))) {
+ arg += strlen(BRIDGE_PFX);
+ bridging = true;
+ }
+
+ /* A mac address may follow the bridge name or IP address */
+ p = strchr(arg, ':');
+ if (p) {
+ str2mac(p+1, conf.mac);
+ add_feature(dev, VIRTIO_NET_F_MAC);
+ *p = '\0';
+ }
+
+ /* arg is now either an IP address or a bridge name */
+ if (bridging)
+ add_to_bridge(ipfd, tapif, arg);
+ else
+ ip = str2ip(arg);
+
+ /* Set up the tun device. */
+ configure_device(ipfd, tapif, ip);
+
+ add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY);
+ /* Expect Guest to handle everything except UFO */
+ add_feature(dev, VIRTIO_NET_F_CSUM);
+ add_feature(dev, VIRTIO_NET_F_GUEST_CSUM);
+ add_feature(dev, VIRTIO_NET_F_GUEST_TSO4);
+ add_feature(dev, VIRTIO_NET_F_GUEST_TSO6);
+ add_feature(dev, VIRTIO_NET_F_GUEST_ECN);
+ add_feature(dev, VIRTIO_NET_F_HOST_TSO4);
+ add_feature(dev, VIRTIO_NET_F_HOST_TSO6);
+ add_feature(dev, VIRTIO_NET_F_HOST_ECN);
+ /* We handle indirect ring entries */
+ add_feature(dev, VIRTIO_RING_F_INDIRECT_DESC);
+ set_config(dev, sizeof(conf), &conf);
+
+ /* We don't need the socket any more; setup is done. */
+ close(ipfd);
+
+ devices.device_num++;
+
+ if (bridging)
+ verbose("device %u: tun %s attached to bridge: %s\n",
+ devices.device_num, tapif, arg);
+ else
+ verbose("device %u: tun %s: %s\n",
+ devices.device_num, tapif, arg);
+}
+/*:*/
+
+/* This hangs off device->priv. */
+struct vblk_info {
+ /* The size of the file. */
+ off64_t len;
+
+ /* The file descriptor for the file. */
+ int fd;
+
+};
+
+/*L:210
+ * The Disk
+ *
+ * The disk only has one virtqueue, so it only has one thread. It is really
+ * simple: the Guest asks for a block number and we read or write that position
+ * in the file.
+ *
+ * Before we serviced each virtqueue in a separate thread, that was unacceptably
+ * slow: the Guest waits until the read is finished before running anything
+ * else, even if it could have been doing useful work.
+ *
+ * We could have used async I/O, except it's reputed to suck so hard that
+ * characters actually go missing from your code when you try to use it.
+ */
+static void blk_request(struct virtqueue *vq)
+{
+ struct vblk_info *vblk = vq->dev->priv;
+ unsigned int head, out_num, in_num, wlen;
+ int ret;
+ u8 *in;
+ struct virtio_blk_outhdr *out;
+ struct iovec iov[vq->vring.num];
+ off64_t off;
+
+ /*
+ * Get the next request, where we normally wait. It triggers the
+ * interrupt to acknowledge previously serviced requests (if any).
+ */
+ head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
+
+ /*
+ * Every block request should contain at least one output buffer
+ * (detailing the location on disk and the type of request) and one
+ * input buffer (to hold the result).
+ */
+ if (out_num == 0 || in_num == 0)
+ errx(1, "Bad virtblk cmd %u out=%u in=%u",
+ head, out_num, in_num);
+
+ out = convert(&iov[0], struct virtio_blk_outhdr);
+ in = convert(&iov[out_num+in_num-1], u8);
+ /*
+ * For historical reasons, block operations are expressed in 512 byte
+ * "sectors".
+ */
+ off = out->sector * 512;
+
+ /*
+ * In general the virtio block driver is allowed to try SCSI commands.
+ * It'd be nice if we supported eject, for example, but we don't.
+ */
+ if (out->type & VIRTIO_BLK_T_SCSI_CMD) {
+ fprintf(stderr, "Scsi commands unsupported\n");
+ *in = VIRTIO_BLK_S_UNSUPP;
+ wlen = sizeof(*in);
+ } else if (out->type & VIRTIO_BLK_T_OUT) {
+ /*
+ * Write
+ *
+ * Move to the right location in the block file. This can fail
+ * if they try to write past end.
+ */
+ if (lseek64(vblk->fd, off, SEEK_SET) != off)
+ err(1, "Bad seek to sector %llu", out->sector);
+
+ ret = writev(vblk->fd, iov+1, out_num-1);
+ verbose("WRITE to sector %llu: %i\n", out->sector, ret);
+
+ /*
+ * Grr... Now we know how long the descriptor they sent was, we
+ * make sure they didn't try to write over the end of the block
+ * file (possibly extending it).
+ */
+ if (ret > 0 && off + ret > vblk->len) {
+ /* Trim it back to the correct length */
+ ftruncate64(vblk->fd, vblk->len);
+ /* Die, bad Guest, die. */
+ errx(1, "Write past end %llu+%u", off, ret);
+ }
+
+ wlen = sizeof(*in);
+ *in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
+ } else if (out->type & VIRTIO_BLK_T_FLUSH) {
+ /* Flush */
+ ret = fdatasync(vblk->fd);
+ verbose("FLUSH fdatasync: %i\n", ret);
+ wlen = sizeof(*in);
+ *in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
+ } else {
+ /*
+ * Read
+ *
+ * Move to the right location in the block file. This can fail
+ * if they try to read past end.
+ */
+ if (lseek64(vblk->fd, off, SEEK_SET) != off)
+ err(1, "Bad seek to sector %llu", out->sector);
+
+ ret = readv(vblk->fd, iov+1, in_num-1);
+ verbose("READ from sector %llu: %i\n", out->sector, ret);
+ if (ret >= 0) {
+ wlen = sizeof(*in) + ret;
+ *in = VIRTIO_BLK_S_OK;
+ } else {
+ wlen = sizeof(*in);
+ *in = VIRTIO_BLK_S_IOERR;
+ }
+ }
+
+ /* Finished that request. */
+ add_used(vq, head, wlen);
+}
+
+/*L:198 This actually sets up a virtual block device. */
+static void setup_block_file(const char *filename)
+{
+ struct device *dev;
+ struct vblk_info *vblk;
+ struct virtio_blk_config conf;
+
+ /* Creat the device. */
+ dev = new_device("block", VIRTIO_ID_BLOCK);
+
+ /* The device has one virtqueue, where the Guest places requests. */
+ add_virtqueue(dev, VIRTQUEUE_NUM, blk_request);
+
+ /* Allocate the room for our own bookkeeping */
+ vblk = dev->priv = malloc(sizeof(*vblk));
+
+ /* First we open the file and store the length. */
+ vblk->fd = open_or_die(filename, O_RDWR|O_LARGEFILE);
+ vblk->len = lseek64(vblk->fd, 0, SEEK_END);
+
+ /* We support FLUSH. */
+ add_feature(dev, VIRTIO_BLK_F_FLUSH);
+
+ /* Tell Guest how many sectors this device has. */
+ conf.capacity = cpu_to_le64(vblk->len / 512);
+
+ /*
+ * Tell Guest not to put in too many descriptors at once: two are used
+ * for the in and out elements.
+ */
+ add_feature(dev, VIRTIO_BLK_F_SEG_MAX);
+ conf.seg_max = cpu_to_le32(VIRTQUEUE_NUM - 2);
+
+ /* Don't try to put whole struct: we have 8 bit limit. */
+ set_config(dev, offsetof(struct virtio_blk_config, geometry), &conf);
+
+ verbose("device %u: virtblock %llu sectors\n",
+ ++devices.device_num, le64_to_cpu(conf.capacity));
+}
+
+/*L:211
+ * Our random number generator device reads from /dev/random into the Guest's
+ * input buffers. The usual case is that the Guest doesn't want random numbers
+ * and so has no buffers although /dev/random is still readable, whereas
+ * console is the reverse.
+ *
+ * The same logic applies, however.
+ */
+struct rng_info {
+ int rfd;
+};
+
+static void rng_input(struct virtqueue *vq)
+{
+ int len;
+ unsigned int head, in_num, out_num, totlen = 0;
+ struct rng_info *rng_info = vq->dev->priv;
+ struct iovec iov[vq->vring.num];
+
+ /* First we need a buffer from the Guests's virtqueue. */
+ head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
+ if (out_num)
+ errx(1, "Output buffers in rng?");
+
+ /*
+ * Just like the console write, we loop to cover the whole iovec.
+ * In this case, short reads actually happen quite a bit.
+ */
+ while (!iov_empty(iov, in_num)) {
+ len = readv(rng_info->rfd, iov, in_num);
+ if (len <= 0)
+ err(1, "Read from /dev/random gave %i", len);
+ iov_consume(iov, in_num, len);
+ totlen += len;
+ }
+
+ /* Tell the Guest about the new input. */
+ add_used(vq, head, totlen);
+}
+
+/*L:199
+ * This creates a "hardware" random number device for the Guest.
+ */
+static void setup_rng(void)
+{
+ struct device *dev;
+ struct rng_info *rng_info = malloc(sizeof(*rng_info));
+
+ /* Our device's privat info simply contains the /dev/random fd. */
+ rng_info->rfd = open_or_die("/dev/random", O_RDONLY);
+
+ /* Create the new device. */
+ dev = new_device("rng", VIRTIO_ID_RNG);
+ dev->priv = rng_info;
+
+ /* The device has one virtqueue, where the Guest places inbufs. */
+ add_virtqueue(dev, VIRTQUEUE_NUM, rng_input);
+
+ verbose("device %u: rng\n", devices.device_num++);
+}
+/* That's the end of device setup. */
+
+/*L:230 Reboot is pretty easy: clean up and exec() the Launcher afresh. */
+static void __attribute__((noreturn)) restart_guest(void)
+{
+ unsigned int i;
+
+ /*
+ * Since we don't track all open fds, we simply close everything beyond
+ * stderr.
+ */
+ for (i = 3; i < FD_SETSIZE; i++)
+ close(i);
+
+ /* Reset all the devices (kills all threads). */
+ cleanup_devices();
+
+ execv(main_args[0], main_args);
+ err(1, "Could not exec %s", main_args[0]);
+}
+
+/*L:220
+ * Finally we reach the core of the Launcher which runs the Guest, serves
+ * its input and output, and finally, lays it to rest.
+ */
+static void __attribute__((noreturn)) run_guest(void)
+{
+ for (;;) {
+ unsigned long notify_addr;
+ int readval;
+
+ /* We read from the /dev/lguest device to run the Guest. */
+ readval = pread(lguest_fd, ¬ify_addr,
+ sizeof(notify_addr), cpu_id);
+
+ /* One unsigned long means the Guest did HCALL_NOTIFY */
+ if (readval == sizeof(notify_addr)) {
+ verbose("Notify on address %#lx\n", notify_addr);
+ handle_output(notify_addr);
+ /* ENOENT means the Guest died. Reading tells us why. */
+ } else if (errno == ENOENT) {
+ char reason[1024] = { 0 };
+ pread(lguest_fd, reason, sizeof(reason)-1, cpu_id);
+ errx(1, "%s", reason);
+ /* ERESTART means that we need to reboot the guest */
+ } else if (errno == ERESTART) {
+ restart_guest();
+ /* Anything else means a bug or incompatible change. */
+ } else
+ err(1, "Running guest failed");
+ }
+}
+/*L:240
+ * This is the end of the Launcher. The good news: we are over halfway
+ * through! The bad news: the most fiendish part of the code still lies ahead
+ * of us.
+ *
+ * Are you ready? Take a deep breath and join me in the core of the Host, in
+ * "make Host".
+:*/
+
+static struct option opts[] = {
+ { "verbose", 0, NULL, 'v' },
+ { "tunnet", 1, NULL, 't' },
+ { "block", 1, NULL, 'b' },
+ { "rng", 0, NULL, 'r' },
+ { "initrd", 1, NULL, 'i' },
+ { "username", 1, NULL, 'u' },
+ { "chroot", 1, NULL, 'c' },
+ { NULL },
+};
+static void usage(void)
+{
+ errx(1, "Usage: lguest [--verbose] "
+ "[--tunnet=(<ipaddr>:<macaddr>|bridge:<bridgename>:<macaddr>)\n"
+ "|--block=<filename>|--initrd=<filename>]...\n"
+ "<mem-in-mb> vmlinux [args...]");
+}
+
+/*L:105 The main routine is where the real work begins: */
+int main(int argc, char *argv[])
+{
+ /* Memory, code startpoint and size of the (optional) initrd. */
+ unsigned long mem = 0, start, initrd_size = 0;
+ /* Two temporaries. */
+ int i, c;
+ /* The boot information for the Guest. */
+ struct boot_params *boot;
+ /* If they specify an initrd file to load. */
+ const char *initrd_name = NULL;
+
+ /* Password structure for initgroups/setres[gu]id */
+ struct passwd *user_details = NULL;
+
+ /* Directory to chroot to */
+ char *chroot_path = NULL;
+
+ /* Save the args: we "reboot" by execing ourselves again. */
+ main_args = argv;
+
+ /*
+ * First we initialize the device list. We keep a pointer to the last
+ * device, and the next interrupt number to use for devices (1:
+ * remember that 0 is used by the timer).
+ */
+ devices.lastdev = NULL;
+ devices.next_irq = 1;
+
+ /* We're CPU 0. In fact, that's the only CPU possible right now. */
+ cpu_id = 0;
+
+ /*
+ * We need to know how much memory so we can set up the device
+ * descriptor and memory pages for the devices as we parse the command
+ * line. So we quickly look through the arguments to find the amount
+ * of memory now.
+ */
+ for (i = 1; i < argc; i++) {
+ if (argv[i][0] != '-') {
+ mem = atoi(argv[i]) * 1024 * 1024;
+ /*
+ * We start by mapping anonymous pages over all of
+ * guest-physical memory range. This fills it with 0,
+ * and ensures that the Guest won't be killed when it
+ * tries to access it.
+ */
+ guest_base = map_zeroed_pages(mem / getpagesize()
+ + DEVICE_PAGES);
+ guest_limit = mem;
+ guest_max = mem + DEVICE_PAGES*getpagesize();
+ devices.descpage = get_pages(1);
+ break;
+ }
+ }
+
+ /* The options are fairly straight-forward */
+ while ((c = getopt_long(argc, argv, "v", opts, NULL)) != EOF) {
+ switch (c) {
+ case 'v':
+ verbose = true;
+ break;
+ case 't':
+ setup_tun_net(optarg);
+ break;
+ case 'b':
+ setup_block_file(optarg);
+ break;
+ case 'r':
+ setup_rng();
+ break;
+ case 'i':
+ initrd_name = optarg;
+ break;
+ case 'u':
+ user_details = getpwnam(optarg);
+ if (!user_details)
+ err(1, "getpwnam failed, incorrect username?");
+ break;
+ case 'c':
+ chroot_path = optarg;
+ break;
+ default:
+ warnx("Unknown argument %s", argv[optind]);
+ usage();
+ }
+ }
+ /*
+ * After the other arguments we expect memory and kernel image name,
+ * followed by command line arguments for the kernel.
+ */
+ if (optind + 2 > argc)
+ usage();
+
+ verbose("Guest base is at %p\n", guest_base);
+
+ /* We always have a console device */
+ setup_console();
+
+ /* Now we load the kernel */
+ start = load_kernel(open_or_die(argv[optind+1], O_RDONLY));
+
+ /* Boot information is stashed at physical address 0 */
+ boot = from_guest_phys(0);
+
+ /* Map the initrd image if requested (at top of physical memory) */
+ if (initrd_name) {
+ initrd_size = load_initrd(initrd_name, mem);
+ /*
+ * These are the location in the Linux boot header where the
+ * start and size of the initrd are expected to be found.
+ */
+ boot->hdr.ramdisk_image = mem - initrd_size;
+ boot->hdr.ramdisk_size = initrd_size;
+ /* The bootloader type 0xFF means "unknown"; that's OK. */
+ boot->hdr.type_of_loader = 0xFF;
+ }
+
+ /*
+ * The Linux boot header contains an "E820" memory map: ours is a
+ * simple, single region.
+ */
+ boot->e820_entries = 1;
+ boot->e820_map[0] = ((struct e820entry) { 0, mem, E820_RAM });
+ /*
+ * The boot header contains a command line pointer: we put the command
+ * line after the boot header.
+ */
+ boot->hdr.cmd_line_ptr = to_guest_phys(boot + 1);
+ /* We use a simple helper to copy the arguments separated by spaces. */
+ concat((char *)(boot + 1), argv+optind+2);
+
+ /* Boot protocol version: 2.07 supports the fields for lguest. */
+ boot->hdr.version = 0x207;
+
+ /* The hardware_subarch value of "1" tells the Guest it's an lguest. */
+ boot->hdr.hardware_subarch = 1;
+
+ /* Tell the entry path not to try to reload segment registers. */
+ boot->hdr.loadflags |= KEEP_SEGMENTS;
+
+ /*
+ * We tell the kernel to initialize the Guest: this returns the open
+ * /dev/lguest file descriptor.
+ */
+ tell_kernel(start);
+
+ /* Ensure that we terminate if a device-servicing child dies. */
+ signal(SIGCHLD, kill_launcher);
+
+ /* If we exit via err(), this kills all the threads, restores tty. */
+ atexit(cleanup_devices);
+
+ /* If requested, chroot to a directory */
+ if (chroot_path) {
+ if (chroot(chroot_path) != 0)
+ err(1, "chroot(\"%s\") failed", chroot_path);
+
+ if (chdir("/") != 0)
+ err(1, "chdir(\"/\") failed");
+
+ verbose("chroot done\n");
+ }
+
+ /* If requested, drop privileges */
+ if (user_details) {
+ uid_t u;
+ gid_t g;
+
+ u = user_details->pw_uid;
+ g = user_details->pw_gid;
+
+ if (initgroups(user_details->pw_name, g) != 0)
+ err(1, "initgroups failed");
+
+ if (setresgid(g, g, g) != 0)
+ err(1, "setresgid failed");
+
+ if (setresuid(u, u, u) != 0)
+ err(1, "setresuid failed");
+
+ verbose("Dropping privileges completed\n");
+ }
+
+ /* Finally, run the Guest. This doesn't return. */
+ run_guest();
+}
+/*:*/
+
+/*M:999
+ * Mastery is done: you now know everything I do.
+ *
+ * But surely you have seen code, features and bugs in your wanderings which
+ * you now yearn to attack? That is the real game, and I look forward to you
+ * patching and forking lguest into the Your-Name-Here-visor.
+ *
+ * Farewell, and good coding!
+ * Rusty Russell.
+ */
--- /dev/null
+ __
+ (___()'`; Rusty's Remarkably Unreliable Guide to Lguest
+ /, /` - or, A Young Coder's Illustrated Hypervisor
+ \\"--\\ http://lguest.ozlabs.org
+
+Lguest is designed to be a minimal 32-bit x86 hypervisor for the Linux kernel,
+for Linux developers and users to experiment with virtualization with the
+minimum of complexity. Nonetheless, it should have sufficient features to
+make it useful for specific tasks, and, of course, you are encouraged to fork
+and enhance it (see drivers/lguest/README).
+
+Features:
+
+- Kernel module which runs in a normal kernel.
+- Simple I/O model for communication.
+- Simple program to create new guests.
+- Logo contains cute puppies: http://lguest.ozlabs.org
+
+Developer features:
+
+- Fun to hack on.
+- No ABI: being tied to a specific kernel anyway, you can change anything.
+- Many opportunities for improvement or feature implementation.
+
+Running Lguest:
+
+- The easiest way to run lguest is to use same kernel as guest and host.
+ You can configure them differently, but usually it's easiest not to.
+
+ You will need to configure your kernel with the following options:
+
+ "General setup":
+ "Prompt for development and/or incomplete code/drivers" = Y
+ (CONFIG_EXPERIMENTAL=y)
+
+ "Processor type and features":
+ "Paravirtualized guest support" = Y
+ "Lguest guest support" = Y
+ "High Memory Support" = off/4GB
+ "Alignment value to which kernel should be aligned" = 0x100000
+ (CONFIG_PARAVIRT=y, CONFIG_LGUEST_GUEST=y, CONFIG_HIGHMEM64G=n and
+ CONFIG_PHYSICAL_ALIGN=0x100000)
+
+ "Device Drivers":
+ "Block devices"
+ "Virtio block driver (EXPERIMENTAL)" = M/Y
+ "Network device support"
+ "Universal TUN/TAP device driver support" = M/Y
+ "Virtio network driver (EXPERIMENTAL)" = M/Y
+ (CONFIG_VIRTIO_BLK=m, CONFIG_VIRTIO_NET=m and CONFIG_TUN=m)
+
+ "Virtualization"
+ "Linux hypervisor example code" = M/Y
+ (CONFIG_LGUEST=m)
+
+- A tool called "lguest" is available in this directory: type "make"
+ to build it. If you didn't build your kernel in-tree, use "make
+ O=<builddir>".
+
+- Create or find a root disk image. There are several useful ones
+ around, such as the xm-test tiny root image at
+ http://xm-test.xensource.com/ramdisks/initrd-1.1-i386.img
+
+ For more serious work, I usually use a distribution ISO image and
+ install it under qemu, then make multiple copies:
+
+ dd if=/dev/zero of=rootfile bs=1M count=2048
+ qemu -cdrom image.iso -hda rootfile -net user -net nic -boot d
+
+ Make sure that you install a getty on /dev/hvc0 if you want to log in on the
+ console!
+
+- "modprobe lg" if you built it as a module.
+
+- Run an lguest as root:
+
+ Documentation/lguest/lguest 64 vmlinux --tunnet=192.168.19.1 --block=rootfile root=/dev/vda
+
+ Explanation:
+ 64: the amount of memory to use, in MB.
+
+ vmlinux: the kernel image found in the top of your build directory. You
+ can also use a standard bzImage.
+
+ --tunnet=192.168.19.1: configures a "tap" device for networking with this
+ IP address.
+
+ --block=rootfile: a file or block device which becomes /dev/vda
+ inside the guest.
+
+ root=/dev/vda: this (and anything else on the command line) are
+ kernel boot parameters.
+
+- Configuring networking. I usually have the host masquerade, using
+ "iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE" and "echo 1 >
+ /proc/sys/net/ipv4/ip_forward". In this example, I would configure
+ eth0 inside the guest at 192.168.19.2.
+
+ Another method is to bridge the tap device to an external interface
+ using --tunnet=bridge:<bridgename>, and perhaps run dhcp on the guest
+ to obtain an IP address. The bridge needs to be configured first:
+ this option simply adds the tap interface to it.
+
+ A simple example on my system:
+
+ ifconfig eth0 0.0.0.0
+ brctl addbr lg0
+ ifconfig lg0 up
+ brctl addif lg0 eth0
+ dhclient lg0
+
+ Then use --tunnet=bridge:lg0 when launching the guest.
+
+ See:
+
+ http://www.linuxfoundation.org/collaborate/workgroups/networking/bridge
+
+ for general information on how to get bridging to work.
+
+- Random number generation. Using the --rng option will provide a
+ /dev/hwrng in the guest that will read from the host's /dev/random.
+ Use this option in conjunction with rng-tools (see ../hw_random.txt)
+ to provide entropy to the guest kernel's /dev/random.
+
+There is a helpful mailing list at http://ozlabs.org/mailman/listinfo/lguest
+
+Good luck!
+Rusty Russell rusty@rustcorp.com.au.
--- /dev/null
+ User Mode Linux HOWTO
+ User Mode Linux Core Team
+ Mon Nov 18 14:16:16 EST 2002
+
+ This document describes the use and abuse of Jeff Dike's User Mode
+ Linux: a port of the Linux kernel as a normal Intel Linux process.
+ ______________________________________________________________________
+
+ Table of Contents
+
+ 1. Introduction
+
+ 1.1 How is User Mode Linux Different?
+ 1.2 Why Would I Want User Mode Linux?
+
+ 2. Compiling the kernel and modules
+
+ 2.1 Compiling the kernel
+ 2.2 Compiling and installing kernel modules
+ 2.3 Compiling and installing uml_utilities
+
+ 3. Running UML and logging in
+
+ 3.1 Running UML
+ 3.2 Logging in
+ 3.3 Examples
+
+ 4. UML on 2G/2G hosts
+
+ 4.1 Introduction
+ 4.2 The problem
+ 4.3 The solution
+
+ 5. Setting up serial lines and consoles
+
+ 5.1 Specifying the device
+ 5.2 Specifying the channel
+ 5.3 Examples
+
+ 6. Setting up the network
+
+ 6.1 General setup
+ 6.2 Userspace daemons
+ 6.3 Specifying ethernet addresses
+ 6.4 UML interface setup
+ 6.5 Multicast
+ 6.6 TUN/TAP with the uml_net helper
+ 6.7 TUN/TAP with a preconfigured tap device
+ 6.8 Ethertap
+ 6.9 The switch daemon
+ 6.10 Slip
+ 6.11 Slirp
+ 6.12 pcap
+ 6.13 Setting up the host yourself
+
+ 7. Sharing Filesystems between Virtual Machines
+
+ 7.1 A warning
+ 7.2 Using layered block devices
+ 7.3 Note!
+ 7.4 Another warning
+ 7.5 uml_moo : Merging a COW file with its backing file
+
+ 8. Creating filesystems
+
+ 8.1 Create the filesystem file
+ 8.2 Assign the file to a UML device
+ 8.3 Creating and mounting the filesystem
+
+ 9. Host file access
+
+ 9.1 Using hostfs
+ 9.2 hostfs as the root filesystem
+ 9.3 Building hostfs
+
+ 10. The Management Console
+ 10.1 version
+ 10.2 halt and reboot
+ 10.3 config
+ 10.4 remove
+ 10.5 sysrq
+ 10.6 help
+ 10.7 cad
+ 10.8 stop
+ 10.9 go
+
+ 11. Kernel debugging
+
+ 11.1 Starting the kernel under gdb
+ 11.2 Examining sleeping processes
+ 11.3 Running ddd on UML
+ 11.4 Debugging modules
+ 11.5 Attaching gdb to the kernel
+ 11.6 Using alternate debuggers
+
+ 12. Kernel debugging examples
+
+ 12.1 The case of the hung fsck
+ 12.2 Episode 2: The case of the hung fsck
+
+ 13. What to do when UML doesn't work
+
+ 13.1 Strange compilation errors when you build from source
+ 13.2 (obsolete)
+ 13.3 A variety of panics and hangs with /tmp on a reiserfs filesystem
+ 13.4 The compile fails with errors about conflicting types for 'open', 'dup', and 'waitpid'
+ 13.5 UML doesn't work when /tmp is an NFS filesystem
+ 13.6 UML hangs on boot when compiled with gprof support
+ 13.7 syslogd dies with a SIGTERM on startup
+ 13.8 TUN/TAP networking doesn't work on a 2.4 host
+ 13.9 You can network to the host but not to other machines on the net
+ 13.10 I have no root and I want to scream
+ 13.11 UML build conflict between ptrace.h and ucontext.h
+ 13.12 The UML BogoMips is exactly half the host's BogoMips
+ 13.13 When you run UML, it immediately segfaults
+ 13.14 xterms appear, then immediately disappear
+ 13.15 Any other panic, hang, or strange behavior
+
+ 14. Diagnosing Problems
+
+ 14.1 Case 1 : Normal kernel panics
+ 14.2 Case 2 : Tracing thread panics
+ 14.3 Case 3 : Tracing thread panics caused by other threads
+ 14.4 Case 4 : Hangs
+
+ 15. Thanks
+
+ 15.1 Code and Documentation
+ 15.2 Flushing out bugs
+ 15.3 Buglets and clean-ups
+ 15.4 Case Studies
+ 15.5 Other contributions
+
+
+ ______________________________________________________________________
+
+ 1\b1.\b. I\bIn\bnt\btr\bro\bod\bdu\buc\bct\bti\bio\bon\bn
+
+ Welcome to User Mode Linux. It's going to be fun.
+
+
+
+ 1\b1.\b.1\b1.\b. H\bHo\bow\bw i\bis\bs U\bUs\bse\ber\br M\bMo\bod\bde\be L\bLi\bin\bnu\bux\bx D\bDi\bif\bff\bfe\ber\bre\ben\bnt\bt?\b?
+
+ Normally, the Linux Kernel talks straight to your hardware (video
+ card, keyboard, hard drives, etc), and any programs which run ask the
+ kernel to operate the hardware, like so:
+
+
+
+ +-----------+-----------+----+
+ | Process 1 | Process 2 | ...|
+ +-----------+-----------+----+
+ | Linux Kernel |
+ +----------------------------+
+ | Hardware |
+ +----------------------------+
+
+
+
+
+ The User Mode Linux Kernel is different; instead of talking to the
+ hardware, it talks to a `real' Linux kernel (called the `host kernel'
+ from now on), like any other program. Programs can then run inside
+ User-Mode Linux as if they were running under a normal kernel, like
+ so:
+
+
+
+ +----------------+
+ | Process 2 | ...|
+ +-----------+----------------+
+ | Process 1 | User-Mode Linux|
+ +----------------------------+
+ | Linux Kernel |
+ +----------------------------+
+ | Hardware |
+ +----------------------------+
+
+
+
+
+
+ 1\b1.\b.2\b2.\b. W\bWh\bhy\by W\bWo\bou\bul\bld\bd I\bI W\bWa\ban\bnt\bt U\bUs\bse\ber\br M\bMo\bod\bde\be L\bLi\bin\bnu\bux\bx?\b?
+
+
+ 1. If User Mode Linux crashes, your host kernel is still fine.
+
+ 2. You can run a usermode kernel as a non-root user.
+
+ 3. You can debug the User Mode Linux like any normal process.
+
+ 4. You can run gprof (profiling) and gcov (coverage testing).
+
+ 5. You can play with your kernel without breaking things.
+
+ 6. You can use it as a sandbox for testing new apps.
+
+ 7. You can try new development kernels safely.
+
+ 8. You can run different distributions simultaneously.
+
+ 9. It's extremely fun.
+
+
+
+
+
+ 2\b2.\b. C\bCo\bom\bmp\bpi\bil\bli\bin\bng\bg t\bth\bhe\be k\bke\ber\brn\bne\bel\bl a\ban\bnd\bd m\bmo\bod\bdu\bul\ble\bes\bs
+
+
+
+
+ 2\b2.\b.1\b1.\b. C\bCo\bom\bmp\bpi\bil\bli\bin\bng\bg t\bth\bhe\be k\bke\ber\brn\bne\bel\bl
+
+
+ Compiling the user mode kernel is just like compiling any other
+ kernel. Let's go through the steps, using 2.4.0-prerelease (current
+ as of this writing) as an example:
+
+
+ 1. Download the latest UML patch from
+
+ the download page <http://user-mode-linux.sourceforge.net/
+
+ In this example, the file is uml-patch-2.4.0-prerelease.bz2.
+
+
+ 2. Download the matching kernel from your favourite kernel mirror,
+ such as:
+
+ ftp://ftp.ca.kernel.org/pub/kernel/v2.4/linux-2.4.0-prerelease.tar.bz2
+ <ftp://ftp.ca.kernel.org/pub/kernel/v2.4/linux-2.4.0-prerelease.tar.bz2>
+ .
+
+
+ 3. Make a directory and unpack the kernel into it.
+
+
+
+ host%
+ mkdir ~/uml
+
+
+
+
+
+
+ host%
+ cd ~/uml
+
+
+
+
+
+
+ host%
+ tar -xzvf linux-2.4.0-prerelease.tar.bz2
+
+
+
+
+
+
+ 4. Apply the patch using
+
+
+
+ host%
+ cd ~/uml/linux
+
+
+
+ host%
+ bzcat uml-patch-2.4.0-prerelease.bz2 | patch -p1
+
+
+
+
+
+
+ 5. Run your favorite config; `make xconfig ARCH=um' is the most
+ convenient. `make config ARCH=um' and 'make menuconfig ARCH=um'
+ will work as well. The defaults will give you a useful kernel. If
+ you want to change something, go ahead, it probably won't hurt
+ anything.
+
+
+ Note: If the host is configured with a 2G/2G address space split
+ rather than the usual 3G/1G split, then the packaged UML binaries
+ will not run. They will immediately segfault. See ``UML on 2G/2G
+ hosts'' for the scoop on running UML on your system.
+
+
+
+ 6. Finish with `make linux ARCH=um': the result is a file called
+ `linux' in the top directory of your source tree.
+
+ Make sure that you don't build this kernel in /usr/src/linux. On some
+ distributions, /usr/include/asm is a link into this pool. The user-
+ mode build changes the other end of that link, and things that include
+ <asm/anything.h> stop compiling.
+
+ The sources are also available from cvs at the project's cvs page,
+ which has directions on getting the sources. You can also browse the
+ CVS pool from there.
+
+ If you get the CVS sources, you will have to check them out into an
+ empty directory. You will then have to copy each file into the
+ corresponding directory in the appropriate kernel pool.
+
+ If you don't have the latest kernel pool, you can get the
+ corresponding user-mode sources with
+
+
+ host% cvs co -r v_2_3_x linux
+
+
+
+
+ where 'x' is the version in your pool. Note that you will not get the
+ bug fixes and enhancements that have gone into subsequent releases.
+
+
+ 2\b2.\b.2\b2.\b. C\bCo\bom\bmp\bpi\bil\bli\bin\bng\bg a\ban\bnd\bd i\bin\bns\bst\bta\bal\bll\bli\bin\bng\bg k\bke\ber\brn\bne\bel\bl m\bmo\bod\bdu\bul\ble\bes\bs
+
+ UML modules are built in the same way as the native kernel (with the
+ exception of the 'ARCH=um' that you always need for UML):
+
+
+ host% make modules ARCH=um
+
+
+
+
+ Any modules that you want to load into this kernel need to be built in
+ the user-mode pool. Modules from the native kernel won't work.
+
+ You can install them by using ftp or something to copy them into the
+ virtual machine and dropping them into /lib/modules/`uname -r`.
+
+ You can also get the kernel build process to install them as follows:
+
+ 1. with the kernel not booted, mount the root filesystem in the top
+ level of the kernel pool:
+
+
+ host% mount root_fs mnt -o loop
+
+
+
+
+
+
+ 2. run
+
+
+ host%
+ make modules_install INSTALL_MOD_PATH=`pwd`/mnt ARCH=um
+
+
+
+
+
+
+ 3. unmount the filesystem
+
+
+ host% umount mnt
+
+
+
+
+
+
+ 4. boot the kernel on it
+
+
+ When the system is booted, you can use insmod as usual to get the
+ modules into the kernel. A number of things have been loaded into UML
+ as modules, especially filesystems and network protocols and filters,
+ so most symbols which need to be exported probably already are.
+ However, if you do find symbols that need exporting, let us
+ <http://user-mode-linux.sourceforge.net/> know, and
+ they'll be "taken care of".
+
+
+
+ 2\b2.\b.3\b3.\b. C\bCo\bom\bmp\bpi\bil\bli\bin\bng\bg a\ban\bnd\bd i\bin\bns\bst\bta\bal\bll\bli\bin\bng\bg u\bum\bml\bl_\b_u\but\bti\bil\bli\bit\bti\bie\bes\bs
+
+ Many features of the UML kernel require a user-space helper program,
+ so a uml_utilities package is distributed separately from the kernel
+ patch which provides these helpers. Included within this is:
+
+ +\bo port-helper - Used by consoles which connect to xterms or ports
+
+ +\bo tunctl - Configuration tool to create and delete tap devices
+
+ +\bo uml_net - Setuid binary for automatic tap device configuration
+
+ +\bo uml_switch - User-space virtual switch required for daemon
+ transport
+
+ The uml_utilities tree is compiled with:
+
+
+ host#
+ make && make install
+
+
+
+
+ Note that UML kernel patches may require a specific version of the
+ uml_utilities distribution. If you don't keep up with the mailing
+ lists, ensure that you have the latest release of uml_utilities if you
+ are experiencing problems with your UML kernel, particularly when
+ dealing with consoles or command-line switches to the helper programs
+
+
+
+
+
+
+
+
+ 3\b3.\b. R\bRu\bun\bnn\bni\bin\bng\bg U\bUM\bML\bL a\ban\bnd\bd l\blo\bog\bgg\bgi\bin\bng\bg i\bin\bn
+
+
+
+ 3\b3.\b.1\b1.\b. R\bRu\bun\bnn\bni\bin\bng\bg U\bUM\bML\bL
+
+ It runs on 2.2.15 or later, and all 2.4 kernels.
+
+
+ Booting UML is straightforward. Simply run 'linux': it will try to
+ mount the file `root_fs' in the current directory. You do not need to
+ run it as root. If your root filesystem is not named `root_fs', then
+ you need to put a `ubd0=root_fs_whatever' switch on the linux command
+ line.
+
+
+ You will need a filesystem to boot UML from. There are a number
+ available for download from here <http://user-mode-
+ linux.sourceforge.net/> . There are also several tools
+ <http://user-mode-linux.sourceforge.net/> which can be
+ used to generate UML-compatible filesystem images from media.
+ The kernel will boot up and present you with a login prompt.
+
+
+ Note: If the host is configured with a 2G/2G address space split
+ rather than the usual 3G/1G split, then the packaged UML binaries will
+ not run. They will immediately segfault. See ``UML on 2G/2G hosts''
+ for the scoop on running UML on your system.
+
+
+
+ 3\b3.\b.2\b2.\b. L\bLo\bog\bgg\bgi\bin\bng\bg i\bin\bn
+
+
+
+ The prepackaged filesystems have a root account with password 'root'
+ and a user account with password 'user'. The login banner will
+ generally tell you how to log in. So, you log in and you will find
+ yourself inside a little virtual machine. Our filesystems have a
+ variety of commands and utilities installed (and it is fairly easy to
+ add more), so you will have a lot of tools with which to poke around
+ the system.
+
+ There are a couple of other ways to log in:
+
+ +\bo On a virtual console
+
+
+
+ Each virtual console that is configured (i.e. the device exists in
+ /dev and /etc/inittab runs a getty on it) will come up in its own
+ xterm. If you get tired of the xterms, read ``Setting up serial
+ lines and consoles'' to see how to attach the consoles to
+ something else, like host ptys.
+
+
+
+ +\bo Over the serial line
+
+
+ In the boot output, find a line that looks like:
+
+
+
+ serial line 0 assigned pty /dev/ptyp1
+
+
+
+
+ Attach your favorite terminal program to the corresponding tty. I.e.
+ for minicom, the command would be
+
+
+ host% minicom -o -p /dev/ttyp1
+
+
+
+
+
+
+ +\bo Over the net
+
+
+ If the network is running, then you can telnet to the virtual
+ machine and log in to it. See ``Setting up the network'' to learn
+ about setting up a virtual network.
+
+ When you're done using it, run halt, and the kernel will bring itself
+ down and the process will exit.
+
+
+ 3\b3.\b.3\b3.\b. E\bEx\bxa\bam\bmp\bpl\ble\bes\bs
+
+ Here are some examples of UML in action:
+
+ +\bo A login session <http://user-mode-linux.sourceforge.net/login.html>
+
+ +\bo A virtual network <http://user-mode-linux.sourceforge.net/net.html>
+
+
+
+
+
+
+
+ 4\b4.\b. U\bUM\bML\bL o\bon\bn 2\b2G\bG/\b/2\b2G\bG h\bho\bos\bst\bts\bs
+
+
+
+
+ 4\b4.\b.1\b1.\b. I\bIn\bnt\btr\bro\bod\bdu\buc\bct\bti\bio\bon\bn
+
+
+ Most Linux machines are configured so that the kernel occupies the
+ upper 1G (0xc0000000 - 0xffffffff) of the 4G address space and
+ processes use the lower 3G (0x00000000 - 0xbfffffff). However, some
+ machine are configured with a 2G/2G split, with the kernel occupying
+ the upper 2G (0x80000000 - 0xffffffff) and processes using the lower
+ 2G (0x00000000 - 0x7fffffff).
+
+
+
+
+ 4\b4.\b.2\b2.\b. T\bTh\bhe\be p\bpr\bro\bob\bbl\ble\bem\bm
+
+
+ The prebuilt UML binaries on this site will not run on 2G/2G hosts
+ because UML occupies the upper .5G of the 3G process address space
+ (0xa0000000 - 0xbfffffff). Obviously, on 2G/2G hosts, this is right
+ in the middle of the kernel address space, so UML won't even load - it
+ will immediately segfault.
+
+
+
+
+ 4\b4.\b.3\b3.\b. T\bTh\bhe\be s\bso\bol\blu\but\bti\bio\bon\bn
+
+
+ The fix for this is to rebuild UML from source after enabling
+ CONFIG_HOST_2G_2G (under 'General Setup'). This will cause UML to
+ load itself in the top .5G of that smaller process address space,
+ where it will run fine. See ``Compiling the kernel and modules'' if
+ you need help building UML from source.
+
+
+
+
+
+
+
+
+
+
+ 5\b5.\b. S\bSe\bet\btt\bti\bin\bng\bg u\bup\bp s\bse\ber\bri\bia\bal\bl l\bli\bin\bne\bes\bs a\ban\bnd\bd c\bco\bon\bns\bso\bol\ble\bes\bs
+
+
+ It is possible to attach UML serial lines and consoles to many types
+ of host I/O channels by specifying them on the command line.
+
+
+ You can attach them to host ptys, ttys, file descriptors, and ports.
+ This allows you to do things like
+
+ +\bo have a UML console appear on an unused host console,
+
+ +\bo hook two virtual machines together by having one attach to a pty
+ and having the other attach to the corresponding tty
+
+ +\bo make a virtual machine accessible from the net by attaching a
+ console to a port on the host.
+
+
+ The general format of the command line option is device=channel.
+
+
+
+ 5\b5.\b.1\b1.\b. S\bSp\bpe\bec\bci\bif\bfy\byi\bin\bng\bg t\bth\bhe\be d\bde\bev\bvi\bic\bce\be
+
+ Devices are specified with "con" or "ssl" (console or serial line,
+ respectively), optionally with a device number if you are talking
+ about a specific device.
+
+
+ Using just "con" or "ssl" describes all of the consoles or serial
+ lines. If you want to talk about console #3 or serial line #10, they
+ would be "con3" and "ssl10", respectively.
+
+
+ A specific device name will override a less general "con=" or "ssl=".
+ So, for example, you can assign a pty to each of the serial lines
+ except for the first two like this:
+
+
+ ssl=pty ssl0=tty:/dev/tty0 ssl1=tty:/dev/tty1
+
+
+
+
+ The specificity of the device name is all that matters; order on the
+ command line is irrelevant.
+
+
+
+ 5\b5.\b.2\b2.\b. S\bSp\bpe\bec\bci\bif\bfy\byi\bin\bng\bg t\bth\bhe\be c\bch\bha\ban\bnn\bne\bel\bl
+
+ There are a number of different types of channels to attach a UML
+ device to, each with a different way of specifying exactly what to
+ attach to.
+
+ +\bo pseudo-terminals - device=pty pts terminals - device=pts
+
+
+ This will cause UML to allocate a free host pseudo-terminal for the
+ device. The terminal that it got will be announced in the boot
+ log. You access it by attaching a terminal program to the
+ corresponding tty:
+
+ +\bo screen /dev/pts/n
+
+ +\bo screen /dev/ttyxx
+
+ +\bo minicom -o -p /dev/ttyxx - minicom seems not able to handle pts
+ devices
+
+ +\bo kermit - start it up, 'open' the device, then 'connect'
+
+
+
+
+
+ +\bo terminals - device=tty:tty device file
+
+
+ This will make UML attach the device to the specified tty (i.e
+
+
+ con1=tty:/dev/tty3
+
+
+
+
+ will attach UML's console 1 to the host's /dev/tty3). If the tty that
+ you specify is the slave end of a tty/pty pair, something else must
+ have already opened the corresponding pty in order for this to work.
+
+
+
+
+
+ +\bo xterms - device=xterm
+
+
+ UML will run an xterm and the device will be attached to it.
+
+
+
+
+
+ +\bo Port - device=port:port number
+
+
+ This will attach the UML devices to the specified host port.
+ Attaching console 1 to the host's port 9000 would be done like
+ this:
+
+
+ con1=port:9000
+
+
+
+
+ Attaching all the serial lines to that port would be done similarly:
+
+
+ ssl=port:9000
+
+
+
+
+ You access these devices by telnetting to that port. Each active tel-
+ net session gets a different device. If there are more telnets to a
+ port than UML devices attached to it, then the extra telnet sessions
+ will block until an existing telnet detaches, or until another device
+ becomes active (i.e. by being activated in /etc/inittab).
+
+ This channel has the advantage that you can both attach multiple UML
+ devices to it and know how to access them without reading the UML boot
+ log. It is also unique in allowing access to a UML from remote
+ machines without requiring that the UML be networked. This could be
+ useful in allowing public access to UMLs because they would be
+ accessible from the net, but wouldn't need any kind of network
+ filtering or access control because they would have no network access.
+
+
+ If you attach the main console to a portal, then the UML boot will
+ appear to hang. In reality, it's waiting for a telnet to connect, at
+ which point the boot will proceed.
+
+
+
+
+
+ +\bo already-existing file descriptors - device=file descriptor
+
+
+ If you set up a file descriptor on the UML command line, you can
+ attach a UML device to it. This is most commonly used to put the
+ main console back on stdin and stdout after assigning all the other
+ consoles to something else:
+
+
+ con0=fd:0,fd:1 con=pts
+
+
+
+
+
+
+
+
+ +\bo Nothing - device=null
+
+
+ This allows the device to be opened, in contrast to 'none', but
+ reads will block, and writes will succeed and the data will be
+ thrown out.
+
+
+
+
+
+ +\bo None - device=none
+
+
+ This causes the device to disappear.
+
+
+
+ You can also specify different input and output channels for a device
+ by putting a comma between them:
+
+
+ ssl3=tty:/dev/tty2,xterm
+
+
+
+
+ will cause serial line 3 to accept input on the host's /dev/tty3 and
+ display output on an xterm. That's a silly example - the most common
+ use of this syntax is to reattach the main console to stdin and stdout
+ as shown above.
+
+
+ If you decide to move the main console away from stdin/stdout, the
+ initial boot output will appear in the terminal that you're running
+ UML in. However, once the console driver has been officially
+ initialized, then the boot output will start appearing wherever you
+ specified that console 0 should be. That device will receive all
+ subsequent output.
+
+
+
+ 5\b5.\b.3\b3.\b. E\bEx\bxa\bam\bmp\bpl\ble\bes\bs
+
+ There are a number of interesting things you can do with this
+ capability.
+
+
+ First, this is how you get rid of those bleeding console xterms by
+ attaching them to host ptys:
+
+
+ con=pty con0=fd:0,fd:1
+
+
+
+
+ This will make a UML console take over an unused host virtual console,
+ so that when you switch to it, you will see the UML login prompt
+ rather than the host login prompt:
+
+
+ con1=tty:/dev/tty6
+
+
+
+
+ You can attach two virtual machines together with what amounts to a
+ serial line as follows:
+
+ Run one UML with a serial line attached to a pty -
+
+
+ ssl1=pty
+
+
+
+
+ Look at the boot log to see what pty it got (this example will assume
+ that it got /dev/ptyp1).
+
+ Boot the other UML with a serial line attached to the corresponding
+ tty -
+
+
+ ssl1=tty:/dev/ttyp1
+
+
+
+
+ Log in, make sure that it has no getty on that serial line, attach a
+ terminal program like minicom to it, and you should see the login
+ prompt of the other virtual machine.
+
+
+ 6\b6.\b. S\bSe\bet\btt\bti\bin\bng\bg u\bup\bp t\bth\bhe\be n\bne\bet\btw\bwo\bor\brk\bk
+
+
+
+ This page describes how to set up the various transports and to
+ provide a UML instance with network access to the host, other machines
+ on the local net, and the rest of the net.
+
+
+ As of 2.4.5, UML networking has been completely redone to make it much
+ easier to set up, fix bugs, and add new features.
+
+
+ There is a new helper, uml_net, which does the host setup that
+ requires root privileges.
+
+
+ There are currently five transport types available for a UML virtual
+ machine to exchange packets with other hosts:
+
+ +\bo ethertap
+
+ +\bo TUN/TAP
+
+ +\bo Multicast
+
+ +\bo a switch daemon
+
+ +\bo slip
+
+ +\bo slirp
+
+ +\bo pcap
+
+ The TUN/TAP, ethertap, slip, and slirp transports allow a UML
+ instance to exchange packets with the host. They may be directed
+ to the host or the host may just act as a router to provide access
+ to other physical or virtual machines.
+
+
+ The pcap transport is a synthetic read-only interface, using the
+ libpcap binary to collect packets from interfaces on the host and
+ filter them. This is useful for building preconfigured traffic
+ monitors or sniffers.
+
+
+ The daemon and multicast transports provide a completely virtual
+ network to other virtual machines. This network is completely
+ disconnected from the physical network unless one of the virtual
+ machines on it is acting as a gateway.
+
+
+ With so many host transports, which one should you use? Here's when
+ you should use each one:
+
+ +\bo ethertap - if you want access to the host networking and it is
+ running 2.2
+
+ +\bo TUN/TAP - if you want access to the host networking and it is
+ running 2.4. Also, the TUN/TAP transport is able to use a
+ preconfigured device, allowing it to avoid using the setuid uml_net
+ helper, which is a security advantage.
+
+ +\bo Multicast - if you want a purely virtual network and you don't want
+ to set up anything but the UML
+
+ +\bo a switch daemon - if you want a purely virtual network and you
+ don't mind running the daemon in order to get somewhat better
+ performance
+
+ +\bo slip - there is no particular reason to run the slip backend unless
+ ethertap and TUN/TAP are just not available for some reason
+
+ +\bo slirp - if you don't have root access on the host to setup
+ networking, or if you don't want to allocate an IP to your UML
+
+ +\bo pcap - not much use for actual network connectivity, but great for
+ monitoring traffic on the host
+
+ Ethertap is available on 2.4 and works fine. TUN/TAP is preferred
+ to it because it has better performance and ethertap is officially
+ considered obsolete in 2.4. Also, the root helper only needs to
+ run occasionally for TUN/TAP, rather than handling every packet, as
+ it does with ethertap. This is a slight security advantage since
+ it provides fewer opportunities for a nasty UML user to somehow
+ exploit the helper's root privileges.
+
+
+ 6\b6.\b.1\b1.\b. G\bGe\ben\bne\ber\bra\bal\bl s\bse\bet\btu\bup\bp
+
+ First, you must have the virtual network enabled in your UML. If are
+ running a prebuilt kernel from this site, everything is already
+ enabled. If you build the kernel yourself, under the "Network device
+ support" menu, enable "Network device support", and then the three
+ transports.
+
+
+ The next step is to provide a network device to the virtual machine.
+ This is done by describing it on the kernel command line.
+
+ The general format is
+
+
+ eth <n> = <transport> , <transport args>
+
+
+
+
+ For example, a virtual ethernet device may be attached to a host
+ ethertap device as follows:
+
+
+ eth0=ethertap,tap0,fe:fd:0:0:0:1,192.168.0.254
+
+
+
+
+ This sets up eth0 inside the virtual machine to attach itself to the
+ host /dev/tap0, assigns it an ethernet address, and assigns the host
+ tap0 interface an IP address.
+
+
+
+ Note that the IP address you assign to the host end of the tap device
+ must be different than the IP you assign to the eth device inside UML.
+ If you are short on IPs and don't want to consume two per UML, then
+ you can reuse the host's eth IP address for the host ends of the tap
+ devices. Internally, the UMLs must still get unique IPs for their eth
+ devices. You can also give the UMLs non-routable IPs (192.168.x.x or
+ 10.x.x.x) and have the host masquerade them. This will let outgoing
+ connections work, but incoming connections won't without more work,
+ such as port forwarding from the host.
+ Also note that when you configure the host side of an interface, it is
+ only acting as a gateway. It will respond to pings sent to it
+ locally, but is not useful to do that since it's a host interface.
+ You are not talking to the UML when you ping that interface and get a
+ response.
+
+
+ You can also add devices to a UML and remove them at runtime. See the
+ ``The Management Console'' page for details.
+
+
+ The sections below describe this in more detail.
+
+
+ Once you've decided how you're going to set up the devices, you boot
+ UML, log in, configure the UML side of the devices, and set up routes
+ to the outside world. At that point, you will be able to talk to any
+ other machines, physical or virtual, on the net.
+
+
+ If ifconfig inside UML fails and the network refuses to come up, run
+ tell you what went wrong.
+
+
+
+ 6\b6.\b.2\b2.\b. U\bUs\bse\ber\brs\bsp\bpa\bac\bce\be d\bda\bae\bem\bmo\bon\bns\bs
+
+ You will likely need the setuid helper, or the switch daemon, or both.
+ They are both installed with the RPM and deb, so if you've installed
+ either, you can skip the rest of this section.
+
+
+ If not, then you need to check them out of CVS, build them, and
+ install them. The helper is uml_net, in CVS /tools/uml_net, and the
+ daemon is uml_switch, in CVS /tools/uml_router. They are both built
+ with a plain 'make'. Both need to be installed in a directory that's
+ in your path - /usr/bin is recommend. On top of that, uml_net needs
+ to be setuid root.
+
+
+
+ 6\b6.\b.3\b3.\b. S\bSp\bpe\bec\bci\bif\bfy\byi\bin\bng\bg e\bet\bth\bhe\ber\brn\bne\bet\bt a\bad\bdd\bdr\bre\bes\bss\bse\bes\bs
+
+ Below, you will see that the TUN/TAP, ethertap, and daemon interfaces
+ allow you to specify hardware addresses for the virtual ethernet
+ devices. This is generally not necessary. If you don't have a
+ specific reason to do it, you probably shouldn't. If one is not
+ specified on the command line, the driver will assign one based on the
+ device IP address. It will provide the address fe:fd:nn:nn:nn:nn
+ where nn.nn.nn.nn is the device IP address. This is nearly always
+ sufficient to guarantee a unique hardware address for the device. A
+ couple of exceptions are:
+
+ +\bo Another set of virtual ethernet devices are on the same network and
+ they are assigned hardware addresses using a different scheme which
+ may conflict with the UML IP address-based scheme
+
+ +\bo You aren't going to use the device for IP networking, so you don't
+ assign the device an IP address
+
+ If you let the driver provide the hardware address, you should make
+ sure that the device IP address is known before the interface is
+ brought up. So, inside UML, this will guarantee that:
+
+
+
+ UML#
+ ifconfig eth0 192.168.0.250 up
+
+
+
+
+ If you decide to assign the hardware address yourself, make sure that
+ the first byte of the address is even. Addresses with an odd first
+ byte are broadcast addresses, which you don't want assigned to a
+ device.
+
+
+
+ 6\b6.\b.4\b4.\b. U\bUM\bML\bL i\bin\bnt\bte\ber\brf\bfa\bac\bce\be s\bse\bet\btu\bup\bp
+
+ Once the network devices have been described on the command line, you
+ should boot UML and log in.
+
+
+ The first thing to do is bring the interface up:
+
+
+ UML# ifconfig ethn ip-address up
+
+
+
+
+ You should be able to ping the host at this point.
+
+
+ To reach the rest of the world, you should set a default route to the
+ host:
+
+
+ UML# route add default gw host ip
+
+
+
+
+ Again, with host ip of 192.168.0.4:
+
+
+ UML# route add default gw 192.168.0.4
+
+
+
+
+ This page used to recommend setting a network route to your local net.
+ This is wrong, because it will cause UML to try to figure out hardware
+ addresses of the local machines by arping on the interface to the
+ host. Since that interface is basically a single strand of ethernet
+ with two nodes on it (UML and the host) and arp requests don't cross
+ networks, they will fail to elicit any responses. So, what you want
+ is for UML to just blindly throw all packets at the host and let it
+ figure out what to do with them, which is what leaving out the network
+ route and adding the default route does.
+
+
+ Note: If you can't communicate with other hosts on your physical
+ ethernet, it's probably because of a network route that's
+ automatically set up. If you run 'route -n' and see a route that
+ looks like this:
+
+
+
+
+ Destination Gateway Genmask Flags Metric Ref Use Iface
+ 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
+
+
+
+
+ with a mask that's not 255.255.255.255, then replace it with a route
+ to your host:
+
+
+ UML#
+ route del -net 192.168.0.0 dev eth0 netmask 255.255.255.0
+
+
+
+
+
+
+ UML#
+ route add -host 192.168.0.4 dev eth0
+
+
+
+
+ This, plus the default route to the host, will allow UML to exchange
+ packets with any machine on your ethernet.
+
+
+
+ 6\b6.\b.5\b5.\b. M\bMu\bul\blt\bti\bic\bca\bas\bst\bt
+
+ The simplest way to set up a virtual network between multiple UMLs is
+ to use the mcast transport. This was written by Harald Welte and is
+ present in UML version 2.4.5-5um and later. Your system must have
+ multicast enabled in the kernel and there must be a multicast-capable
+ network device on the host. Normally, this is eth0, but if there is
+ no ethernet card on the host, then you will likely get strange error
+ messages when you bring the device up inside UML.
+
+
+ To use it, run two UMLs with
+
+
+ eth0=mcast
+
+
+
+
+ on their command lines. Log in, configure the ethernet device in each
+ machine with different IP addresses:
+
+
+ UML1# ifconfig eth0 192.168.0.254
+
+
+
+
+
+
+ UML2# ifconfig eth0 192.168.0.253
+
+
+
+
+ and they should be able to talk to each other.
+
+ The full set of command line options for this transport are
+
+
+
+ ethn=mcast,ethernet address,multicast
+ address,multicast port,ttl
+
+
+
+
+ Harald's original README is here <http://user-mode-linux.source-
+ forge.net/> and explains these in detail, as well as
+ some other issues.
+
+
+
+ 6\b6.\b.6\b6.\b. T\bTU\bUN\bN/\b/T\bTA\bAP\bP w\bwi\bit\bth\bh t\bth\bhe\be u\bum\bml\bl_\b_n\bne\bet\bt h\bhe\bel\blp\bpe\ber\br
+
+ TUN/TAP is the preferred mechanism on 2.4 to exchange packets with the
+ host. The TUN/TAP backend has been in UML since 2.4.9-3um.
+
+
+ The easiest way to get up and running is to let the setuid uml_net
+ helper do the host setup for you. This involves insmod-ing the tun.o
+ module if necessary, configuring the device, and setting up IP
+ forwarding, routing, and proxy arp. If you are new to UML networking,
+ do this first. If you're concerned about the security implications of
+ the setuid helper, use it to get up and running, then read the next
+ section to see how to have UML use a preconfigured tap device, which
+ avoids the use of uml_net.
+
+
+ If you specify an IP address for the host side of the device, the
+ uml_net helper will do all necessary setup on the host - the only
+ requirement is that TUN/TAP be available, either built in to the host
+ kernel or as the tun.o module.
+
+ The format of the command line switch to attach a device to a TUN/TAP
+ device is
+
+
+ eth <n> =tuntap,,, <IP address>
+
+
+
+
+ For example, this argument will attach the UML's eth0 to the next
+ available tap device and assign an ethernet address to it based on its
+ IP address
+
+
+ eth0=tuntap,,,192.168.0.254
+
+
+
+
+
+
+ Note that the IP address that must be used for the eth device inside
+ UML is fixed by the routing and proxy arp that is set up on the
+ TUN/TAP device on the host. You can use a different one, but it won't
+ work because reply packets won't reach the UML. This is a feature.
+ It prevents a nasty UML user from doing things like setting the UML IP
+ to the same as the network's nameserver or mail server.
+
+
+ There are a couple potential problems with running the TUN/TAP
+ transport on a 2.4 host kernel
+
+ +\bo TUN/TAP seems not to work on 2.4.3 and earlier. Upgrade the host
+ kernel or use the ethertap transport.
+
+ +\bo With an upgraded kernel, TUN/TAP may fail with
+
+
+ File descriptor in bad state
+
+
+
+
+ This is due to a header mismatch between the upgraded kernel and the
+ kernel that was originally installed on the machine. The fix is to
+ make sure that /usr/src/linux points to the headers for the running
+ kernel.
+
+ These were pointed out by Tim Robinson <timro at trkr dot net> in
+ <http://www.geocrawler.com/> name="this uml-
+ user post"> .
+
+
+
+ 6\b6.\b.7\b7.\b. T\bTU\bUN\bN/\b/T\bTA\bAP\bP w\bwi\bit\bth\bh a\ba p\bpr\bre\bec\bco\bon\bnf\bfi\big\bgu\bur\bre\bed\bd t\bta\bap\bp d\bde\bev\bvi\bic\bce\be
+
+ If you prefer not to have UML use uml_net (which is somewhat
+ insecure), with UML 2.4.17-11, you can set up a TUN/TAP device
+ beforehand. The setup needs to be done as root, but once that's done,
+ there is no need for root assistance. Setting up the device is done
+ as follows:
+
+ +\bo Create the device with tunctl (available from the UML utilities
+ tarball)
+
+
+
+
+ host# tunctl -u uid
+
+
+
+
+ where uid is the user id or username that UML will be run as. This
+ will tell you what device was created.
+
+ +\bo Configure the device IP (change IP addresses and device name to
+ suit)
+
+
+
+
+ host# ifconfig tap0 192.168.0.254 up
+
+
+
+
+
+ +\bo Set up routing and arping if desired - this is my recipe, there are
+ other ways of doing the same thing
+
+
+ host#
+ bash -c 'echo 1 > /proc/sys/net/ipv4/ip_forward'
+
+ host#
+ route add -host 192.168.0.253 dev tap0
+
+
+
+
+
+
+ host#
+ bash -c 'echo 1 > /proc/sys/net/ipv4/conf/tap0/proxy_arp'
+
+
+
+
+
+
+ host#
+ arp -Ds 192.168.0.253 eth0 pub
+
+
+
+
+ Note that this must be done every time the host boots - this configu-
+ ration is not stored across host reboots. So, it's probably a good
+ idea to stick it in an rc file. An even better idea would be a little
+ utility which reads the information from a config file and sets up
+ devices at boot time.
+
+ +\bo Rather than using up two IPs and ARPing for one of them, you can
+ also provide direct access to your LAN by the UML by using a
+ bridge.
+
+
+ host#
+ brctl addbr br0
+
+
+
+
+
+
+ host#
+ ifconfig eth0 0.0.0.0 promisc up
+
+
+
+
+
+
+ host#
+ ifconfig tap0 0.0.0.0 promisc up
+
+
+
+
+
+
+ host#
+ ifconfig br0 192.168.0.1 netmask 255.255.255.0 up
+
+
+
+
+
+
+
+ host#
+ brctl stp br0 off
+
+
+
+
+
+
+ host#
+ brctl setfd br0 1
+
+
+
+
+
+
+ host#
+ brctl sethello br0 1
+
+
+
+
+
+
+ host#
+ brctl addif br0 eth0
+
+
+
+
+
+
+ host#
+ brctl addif br0 tap0
+
+
+
+
+ Note that 'br0' should be setup using ifconfig with the existing IP
+ address of eth0, as eth0 no longer has its own IP.
+
+ +\bo
+
+
+ Also, the /dev/net/tun device must be writable by the user running
+ UML in order for the UML to use the device that's been configured
+ for it. The simplest thing to do is
+
+
+ host# chmod 666 /dev/net/tun
+
+
+
+
+ Making it world-writable looks bad, but it seems not to be
+ exploitable as a security hole. However, it does allow anyone to cre-
+ ate useless tap devices (useless because they can't configure them),
+ which is a DOS attack. A somewhat more secure alternative would to be
+ to create a group containing all the users who have preconfigured tap
+ devices and chgrp /dev/net/tun to that group with mode 664 or 660.
+
+
+ +\bo Once the device is set up, run UML with 'eth0=tuntap,device name'
+ (i.e. 'eth0=tuntap,tap0') on the command line (or do it with the
+ mconsole config command).
+
+ +\bo Bring the eth device up in UML and you're in business.
+
+ If you don't want that tap device any more, you can make it non-
+ persistent with
+
+
+ host# tunctl -d tap device
+
+
+
+
+ Finally, tunctl has a -b (for brief mode) switch which causes it to
+ output only the name of the tap device it created. This makes it
+ suitable for capture by a script:
+
+
+ host# TAP=`tunctl -u 1000 -b`
+
+
+
+
+
+
+ 6\b6.\b.8\b8.\b. E\bEt\bth\bhe\ber\brt\bta\bap\bp
+
+ Ethertap is the general mechanism on 2.2 for userspace processes to
+ exchange packets with the kernel.
+
+
+
+ To use this transport, you need to describe the virtual network device
+ on the UML command line. The general format for this is
+
+
+ eth <n> =ethertap, <device> , <ethernet address> , <tap IP address>
+
+
+
+
+ So, the previous example
+
+
+ eth0=ethertap,tap0,fe:fd:0:0:0:1,192.168.0.254
+
+
+
+
+ attaches the UML eth0 device to the host /dev/tap0, assigns it the
+ ethernet address fe:fd:0:0:0:1, and assigns the IP address
+ 192.168.0.254 to the tap device.
+
+
+
+ The tap device is mandatory, but the others are optional. If the
+ ethernet address is omitted, one will be assigned to it.
+
+
+ The presence of the tap IP address will cause the helper to run and do
+ whatever host setup is needed to allow the virtual machine to
+ communicate with the outside world. If you're not sure you know what
+ you're doing, this is the way to go.
+
+
+ If it is absent, then you must configure the tap device and whatever
+ arping and routing you will need on the host. However, even in this
+ case, the uml_net helper still needs to be in your path and it must be
+ setuid root if you're not running UML as root. This is because the
+ tap device doesn't support SIGIO, which UML needs in order to use
+ something as a source of input. So, the helper is used as a
+ convenient asynchronous IO thread.
+
+ If you're using the uml_net helper, you can ignore the following host
+ setup - uml_net will do it for you. You just need to make sure you
+ have ethertap available, either built in to the host kernel or
+ available as a module.
+
+
+ If you want to set things up yourself, you need to make sure that the
+ appropriate /dev entry exists. If it doesn't, become root and create
+ it as follows:
+
+
+ mknod /dev/tap <minor> c 36 <minor> + 16
+
+
+
+
+ For example, this is how to create /dev/tap0:
+
+
+ mknod /dev/tap0 c 36 0 + 16
+
+
+
+
+ You also need to make sure that the host kernel has ethertap support.
+ If ethertap is enabled as a module, you apparently need to insmod
+ ethertap once for each ethertap device you want to enable. So,
+
+
+ host#
+ insmod ethertap
+
+
+
+
+ will give you the tap0 interface. To get the tap1 interface, you need
+ to run
+
+
+ host#
+ insmod ethertap unit=1 -o ethertap1
+
+
+
+
+
+
+
+ 6\b6.\b.9\b9.\b. T\bTh\bhe\be s\bsw\bwi\bit\btc\bch\bh d\bda\bae\bem\bmo\bon\bn
+
+ N\bNo\bot\bte\be: This is the daemon formerly known as uml_router, but which was
+ renamed so the network weenies of the world would stop growling at me.
+
+
+ The switch daemon, uml_switch, provides a mechanism for creating a
+ totally virtual network. By default, it provides no connection to the
+ host network (but see -tap, below).
+
+
+ The first thing you need to do is run the daemon. Running it with no
+ arguments will make it listen on a default pair of unix domain
+ sockets.
+
+
+ If you want it to listen on a different pair of sockets, use
+
+
+ -unix control socket data socket
+
+
+
+
+
+ If you want it to act as a hub rather than a switch, use
+
+
+ -hub
+
+
+
+
+
+ If you want the switch to be connected to host networking (allowing
+ the umls to get access to the outside world through the host), use
+
+
+ -tap tap0
+
+
+
+
+
+ Note that the tap device must be preconfigured (see "TUN/TAP with a
+ preconfigured tap device", above). If you're using a different tap
+ device than tap0, specify that instead of tap0.
+
+
+ uml_switch can be backgrounded as follows
+
+
+ host%
+ uml_switch [ options ] < /dev/null > /dev/null
+
+
+
+
+ The reason it doesn't background by default is that it listens to
+ stdin for EOF. When it sees that, it exits.
+
+
+ The general format of the kernel command line switch is
+
+
+
+ ethn=daemon,ethernet address,socket
+ type,control socket,data socket
+
+
+
+
+ You can leave off everything except the 'daemon'. You only need to
+ specify the ethernet address if the one that will be assigned to it
+ isn't acceptable for some reason. The rest of the arguments describe
+ how to communicate with the daemon. You should only specify them if
+ you told the daemon to use different sockets than the default. So, if
+ you ran the daemon with no arguments, running the UML on the same
+ machine with
+ eth0=daemon
+
+
+
+
+ will cause the eth0 driver to attach itself to the daemon correctly.
+
+
+
+ 6\b6.\b.1\b10\b0.\b. S\bSl\bli\bip\bp
+
+ Slip is another, less general, mechanism for a process to communicate
+ with the host networking. In contrast to the ethertap interface,
+ which exchanges ethernet frames with the host and can be used to
+ transport any higher-level protocol, it can only be used to transport
+ IP.
+
+
+ The general format of the command line switch is
+
+
+
+ ethn=slip,slip IP
+
+
+
+
+ The slip IP argument is the IP address that will be assigned to the
+ host end of the slip device. If it is specified, the helper will run
+ and will set up the host so that the virtual machine can reach it and
+ the rest of the network.
+
+
+ There are some oddities with this interface that you should be aware
+ of. You should only specify one slip device on a given virtual
+ machine, and its name inside UML will be 'umn', not 'eth0' or whatever
+ you specified on the command line. These problems will be fixed at
+ some point.
+
+
+
+ 6\b6.\b.1\b11\b1.\b. S\bSl\bli\bir\brp\bp
+
+ slirp uses an external program, usually /usr/bin/slirp, to provide IP
+ only networking connectivity through the host. This is similar to IP
+ masquerading with a firewall, although the translation is performed in
+ user-space, rather than by the kernel. As slirp does not set up any
+ interfaces on the host, or changes routing, slirp does not require
+ root access or setuid binaries on the host.
+
+
+ The general format of the command line switch for slirp is:
+
+
+
+ ethn=slirp,ethernet address,slirp path
+
+
+
+
+ The ethernet address is optional, as UML will set up the interface
+ with an ethernet address based upon the initial IP address of the
+ interface. The slirp path is generally /usr/bin/slirp, although it
+ will depend on distribution.
+
+
+ The slirp program can have a number of options passed to the command
+ line and we can't add them to the UML command line, as they will be
+ parsed incorrectly. Instead, a wrapper shell script can be written or
+ the options inserted into the /.slirprc file. More information on
+ all of the slirp options can be found in its man pages.
+
+
+ The eth0 interface on UML should be set up with the IP 10.2.0.15,
+ although you can use anything as long as it is not used by a network
+ you will be connecting to. The default route on UML should be set to
+ use
+
+
+ UML#
+ route add default dev eth0
+
+
+
+
+ slirp provides a number of useful IP addresses which can be used by
+ UML, such as 10.0.2.3 which is an alias for the DNS server specified
+ in /etc/resolv.conf on the host or the IP given in the 'dns' option
+ for slirp.
+
+
+ Even with a baudrate setting higher than 115200, the slirp connection
+ is limited to 115200. If you need it to go faster, the slirp binary
+ needs to be compiled with FULL_BOLT defined in config.h.
+
+
+
+ 6\b6.\b.1\b12\b2.\b. p\bpc\bca\bap\bp
+
+ The pcap transport is attached to a UML ethernet device on the command
+ line or with uml_mconsole with the following syntax:
+
+
+
+ ethn=pcap,host interface,filter
+ expression,option1,option2
+
+
+
+
+ The expression and options are optional.
+
+
+ The interface is whatever network device on the host you want to
+ sniff. The expression is a pcap filter expression, which is also what
+ tcpdump uses, so if you know how to specify tcpdump filters, you will
+ use the same expressions here. The options are up to two of
+ 'promisc', control whether pcap puts the host interface into
+ promiscuous mode. 'optimize' and 'nooptimize' control whether the pcap
+ expression optimizer is used.
+
+
+ Example:
+
+
+
+ eth0=pcap,eth0,tcp
+
+ eth1=pcap,eth0,!tcp
+
+
+
+ will cause the UML eth0 to emit all tcp packets on the host eth0 and
+ the UML eth1 to emit all non-tcp packets on the host eth0.
+
+
+
+ 6\b6.\b.1\b13\b3.\b. S\bSe\bet\btt\bti\bin\bng\bg u\bup\bp t\bth\bhe\be h\bho\bos\bst\bt y\byo\bou\bur\brs\bse\bel\blf\bf
+
+ If you don't specify an address for the host side of the ethertap or
+ slip device, UML won't do any setup on the host. So this is what is
+ needed to get things working (the examples use a host-side IP of
+ 192.168.0.251 and a UML-side IP of 192.168.0.250 - adjust to suit your
+ own network):
+
+ +\bo The device needs to be configured with its IP address. Tap devices
+ are also configured with an mtu of 1484. Slip devices are
+ configured with a point-to-point address pointing at the UML ip
+ address.
+
+
+ host# ifconfig tap0 arp mtu 1484 192.168.0.251 up
+
+
+
+
+
+
+ host#
+ ifconfig sl0 192.168.0.251 pointopoint 192.168.0.250 up
+
+
+
+
+
+ +\bo If a tap device is being set up, a route is set to the UML IP.
+
+
+ UML# route add -host 192.168.0.250 gw 192.168.0.251
+
+
+
+
+
+ +\bo To allow other hosts on your network to see the virtual machine,
+ proxy arp is set up for it.
+
+
+ host# arp -Ds 192.168.0.250 eth0 pub
+
+
+
+
+
+ +\bo Finally, the host is set up to route packets.
+
+
+ host# echo 1 > /proc/sys/net/ipv4/ip_forward
+
+
+
+
+
+
+
+
+
+
+ 7\b7.\b. S\bSh\bha\bar\bri\bin\bng\bg F\bFi\bil\ble\bes\bsy\bys\bst\bte\bem\bms\bs b\bbe\bet\btw\bwe\bee\ben\bn V\bVi\bir\brt\btu\bua\bal\bl M\bMa\bac\bch\bhi\bin\bne\bes\bs
+
+
+
+
+ 7\b7.\b.1\b1.\b. A\bA w\bwa\bar\brn\bni\bin\bng\bg
+
+ Don't attempt to share filesystems simply by booting two UMLs from the
+ same file. That's the same thing as booting two physical machines
+ from a shared disk. It will result in filesystem corruption.
+
+
+
+ 7\b7.\b.2\b2.\b. U\bUs\bsi\bin\bng\bg l\bla\bay\bye\ber\bre\bed\bd b\bbl\blo\boc\bck\bk d\bde\bev\bvi\bic\bce\bes\bs
+
+ The way to share a filesystem between two virtual machines is to use
+ the copy-on-write (COW) layering capability of the ubd block driver.
+ As of 2.4.6-2um, the driver supports layering a read-write private
+ device over a read-only shared device. A machine's writes are stored
+ in the private device, while reads come from either device - the
+ private one if the requested block is valid in it, the shared one if
+ not. Using this scheme, the majority of data which is unchanged is
+ shared between an arbitrary number of virtual machines, each of which
+ has a much smaller file containing the changes that it has made. With
+ a large number of UMLs booting from a large root filesystem, this
+ leads to a huge disk space saving. It will also help performance,
+ since the host will be able to cache the shared data using a much
+ smaller amount of memory, so UML disk requests will be served from the
+ host's memory rather than its disks.
+
+
+
+
+ To add a copy-on-write layer to an existing block device file, simply
+ add the name of the COW file to the appropriate ubd switch:
+
+
+ ubd0=root_fs_cow,root_fs_debian_22
+
+
+
+
+ where 'root_fs_cow' is the private COW file and 'root_fs_debian_22' is
+ the existing shared filesystem. The COW file need not exist. If it
+ doesn't, the driver will create and initialize it. Once the COW file
+ has been initialized, it can be used on its own on the command line:
+
+
+ ubd0=root_fs_cow
+
+
+
+
+ The name of the backing file is stored in the COW file header, so it
+ would be redundant to continue specifying it on the command line.
+
+
+
+ 7\b7.\b.3\b3.\b. N\bNo\bot\bte\be!\b!
+
+ When checking the size of the COW file in order to see the gobs of
+ space that you're saving, make sure you use 'ls -ls' to see the actual
+ disk consumption rather than the length of the file. The COW file is
+ sparse, so the length will be very different from the disk usage.
+ Here is a 'ls -l' of a COW file and backing file from one boot and
+ shutdown:
+ host% ls -l cow.debian debian2.2
+ -rw-r--r-- 1 jdike jdike 492504064 Aug 6 21:16 cow.debian
+ -rwxrw-rw- 1 jdike jdike 537919488 Aug 6 20:42 debian2.2
+
+
+
+
+ Doesn't look like much saved space, does it? Well, here's 'ls -ls':
+
+
+ host% ls -ls cow.debian debian2.2
+ 880 -rw-r--r-- 1 jdike jdike 492504064 Aug 6 21:16 cow.debian
+ 525832 -rwxrw-rw- 1 jdike jdike 537919488 Aug 6 20:42 debian2.2
+
+
+
+
+ Now, you can see that the COW file has less than a meg of disk, rather
+ than 492 meg.
+
+
+
+ 7\b7.\b.4\b4.\b. A\bAn\bno\bot\bth\bhe\ber\br w\bwa\bar\brn\bni\bin\bng\bg
+
+ Once a filesystem is being used as a readonly backing file for a COW
+ file, do not boot directly from it or modify it in any way. Doing so
+ will invalidate any COW files that are using it. The mtime and size
+ of the backing file are stored in the COW file header at its creation,
+ and they must continue to match. If they don't, the driver will
+ refuse to use the COW file.
+
+
+
+
+ If you attempt to evade this restriction by changing either the
+ backing file or the COW header by hand, you will get a corrupted
+ filesystem.
+
+
+
+
+ Among other things, this means that upgrading the distribution in a
+ backing file and expecting that all of the COW files using it will see
+ the upgrade will not work.
+
+
+
+
+ 7\b7.\b.5\b5.\b. u\bum\bml\bl_\b_m\bmo\boo\bo :\b: M\bMe\ber\brg\bgi\bin\bng\bg a\ba C\bCO\bOW\bW f\bfi\bil\ble\be w\bwi\bit\bth\bh i\bit\bts\bs b\bba\bac\bck\bki\bin\bng\bg f\bfi\bil\ble\be
+
+ Depending on how you use UML and COW devices, it may be advisable to
+ merge the changes in the COW file into the backing file every once in
+ a while.
+
+
+
+
+ The utility that does this is uml_moo. Its usage is
+
+
+ host% uml_moo COW file new backing file
+
+
+
+
+ There's no need to specify the backing file since that information is
+ already in the COW file header. If you're paranoid, boot the new
+ merged file, and if you're happy with it, move it over the old backing
+ file.
+
+
+
+
+ uml_moo creates a new backing file by default as a safety measure. It
+ also has a destructive merge option which will merge the COW file
+ directly into its current backing file. This is really only usable
+ when the backing file only has one COW file associated with it. If
+ there are multiple COWs associated with a backing file, a -d merge of
+ one of them will invalidate all of the others. However, it is
+ convenient if you're short of disk space, and it should also be
+ noticeably faster than a non-destructive merge.
+
+
+
+
+ uml_moo is installed with the UML deb and RPM. If you didn't install
+ UML from one of those packages, you can also get it from the UML
+ utilities <http://user-mode-linux.sourceforge.net/
+ utilities> tar file in tools/moo.
+
+
+
+
+
+
+
+
+ 8\b8.\b. C\bCr\bre\bea\bat\bti\bin\bng\bg f\bfi\bil\ble\bes\bsy\bys\bst\bte\bem\bms\bs
+
+
+ You may want to create and mount new UML filesystems, either because
+ your root filesystem isn't large enough or because you want to use a
+ filesystem other than ext2.
+
+
+ This was written on the occasion of reiserfs being included in the
+ 2.4.1 kernel pool, and therefore the 2.4.1 UML, so the examples will
+ talk about reiserfs. This information is generic, and the examples
+ should be easy to translate to the filesystem of your choice.
+
+
+ 8\b8.\b.1\b1.\b. C\bCr\bre\bea\bat\bte\be t\bth\bhe\be f\bfi\bil\ble\bes\bsy\bys\bst\bte\bem\bm f\bfi\bil\ble\be
+
+ dd is your friend. All you need to do is tell dd to create an empty
+ file of the appropriate size. I usually make it sparse to save time
+ and to avoid allocating disk space until it's actually used. For
+ example, the following command will create a sparse 100 meg file full
+ of zeroes.
+
+
+ host%
+ dd if=/dev/zero of=new_filesystem seek=100 count=1 bs=1M
+
+
+
+
+
+
+ 8\b8.\b.2\b2.\b. A\bAs\bss\bsi\big\bgn\bn t\bth\bhe\be f\bfi\bil\ble\be t\bto\bo a\ba U\bUM\bML\bL d\bde\bev\bvi\bic\bce\be
+
+ Add an argument like the following to the UML command line:
+
+ ubd4=new_filesystem
+
+
+
+
+ making sure that you use an unassigned ubd device number.
+
+
+
+ 8\b8.\b.3\b3.\b. C\bCr\bre\bea\bat\bti\bin\bng\bg a\ban\bnd\bd m\bmo\bou\bun\bnt\bti\bin\bng\bg t\bth\bhe\be f\bfi\bil\ble\bes\bsy\bys\bst\bte\bem\bm
+
+ Make sure that the filesystem is available, either by being built into
+ the kernel, or available as a module, then boot up UML and log in. If
+ the root filesystem doesn't have the filesystem utilities (mkfs, fsck,
+ etc), then get them into UML by way of the net or hostfs.
+
+
+ Make the new filesystem on the device assigned to the new file:
+
+
+ host# mkreiserfs /dev/ubd/4
+
+
+ <----------- MKREISERFSv2 ----------->
+
+ ReiserFS version 3.6.25
+ Block size 4096 bytes
+ Block count 25856
+ Used blocks 8212
+ Journal - 8192 blocks (18-8209), journal header is in block 8210
+ Bitmaps: 17
+ Root block 8211
+ Hash function "r5"
+ ATTENTION: ALL DATA WILL BE LOST ON '/dev/ubd/4'! (y/n)y
+ journal size 8192 (from 18)
+ Initializing journal - 0%....20%....40%....60%....80%....100%
+ Syncing..done.
+
+
+
+
+ Now, mount it:
+
+
+ UML#
+ mount /dev/ubd/4 /mnt
+
+
+
+
+ and you're in business.
+
+
+
+
+
+
+
+
+
+ 9\b9.\b. H\bHo\bos\bst\bt f\bfi\bil\ble\be a\bac\bcc\bce\bes\bss\bs
+
+
+ If you want to access files on the host machine from inside UML, you
+ can treat it as a separate machine and either nfs mount directories
+ from the host or copy files into the virtual machine with scp or rcp.
+ However, since UML is running on the host, it can access those
+ files just like any other process and make them available inside the
+ virtual machine without needing to use the network.
+
+
+ This is now possible with the hostfs virtual filesystem. With it, you
+ can mount a host directory into the UML filesystem and access the
+ files contained in it just as you would on the host.
+
+
+ 9\b9.\b.1\b1.\b. U\bUs\bsi\bin\bng\bg h\bho\bos\bst\btf\bfs\bs
+
+ To begin with, make sure that hostfs is available inside the virtual
+ machine with
+
+
+ UML# cat /proc/filesystems
+
+
+
+ . hostfs should be listed. If it's not, either rebuild the kernel
+ with hostfs configured into it or make sure that hostfs is built as a
+ module and available inside the virtual machine, and insmod it.
+
+
+ Now all you need to do is run mount:
+
+
+ UML# mount none /mnt/host -t hostfs
+
+
+
+
+ will mount the host's / on the virtual machine's /mnt/host.
+
+
+ If you don't want to mount the host root directory, then you can
+ specify a subdirectory to mount with the -o switch to mount:
+
+
+ UML# mount none /mnt/home -t hostfs -o /home
+
+
+
+
+ will mount the hosts's /home on the virtual machine's /mnt/home.
+
+
+
+ 9\b9.\b.2\b2.\b. h\bho\bos\bst\btf\bfs\bs a\bas\bs t\bth\bhe\be r\bro\boo\bot\bt f\bfi\bil\ble\bes\bsy\bys\bst\bte\bem\bm
+
+ It's possible to boot from a directory hierarchy on the host using
+ hostfs rather than using the standard filesystem in a file.
+
+ To start, you need that hierarchy. The easiest way is to loop mount
+ an existing root_fs file:
+
+
+ host# mount root_fs uml_root_dir -o loop
+
+
+
+
+ You need to change the filesystem type of / in etc/fstab to be
+ 'hostfs', so that line looks like this:
+
+ /dev/ubd/0 / hostfs defaults 1 1
+
+
+
+
+ Then you need to chown to yourself all the files in that directory
+ that are owned by root. This worked for me:
+
+
+ host# find . -uid 0 -exec chown jdike {} \;
+
+
+
+
+ Next, make sure that your UML kernel has hostfs compiled in, not as a
+ module. Then run UML with the boot device pointing at that directory:
+
+
+ ubd0=/path/to/uml/root/directory
+
+
+
+
+ UML should then boot as it does normally.
+
+
+ 9\b9.\b.3\b3.\b. B\bBu\bui\bil\bld\bdi\bin\bng\bg h\bho\bos\bst\btf\bfs\bs
+
+ If you need to build hostfs because it's not in your kernel, you have
+ two choices:
+
+
+
+ +\bo Compiling hostfs into the kernel:
+
+
+ Reconfigure the kernel and set the 'Host filesystem' option under
+
+
+ +\bo Compiling hostfs as a module:
+
+
+ Reconfigure the kernel and set the 'Host filesystem' option under
+ be in arch/um/fs/hostfs/hostfs.o. Install that in
+ /lib/modules/`uname -r`/fs in the virtual machine, boot it up, and
+
+
+ UML# insmod hostfs
+
+
+
+
+
+
+
+
+
+
+
+
+ 1\b10\b0.\b. T\bTh\bhe\be M\bMa\ban\bna\bag\bge\bem\bme\ben\bnt\bt C\bCo\bon\bns\bso\bol\ble\be
+
+
+
+ The UML management console is a low-level interface to the kernel,
+ somewhat like the i386 SysRq interface. Since there is a full-blown
+ operating system under UML, there is much greater flexibility possible
+ than with the SysRq mechanism.
+
+
+ There are a number of things you can do with the mconsole interface:
+
+ +\bo get the kernel version
+
+ +\bo add and remove devices
+
+ +\bo halt or reboot the machine
+
+ +\bo Send SysRq commands
+
+ +\bo Pause and resume the UML
+
+
+ You need the mconsole client (uml_mconsole) which is present in CVS
+ (/tools/mconsole) in 2.4.5-9um and later, and will be in the RPM in
+ 2.4.6.
+
+
+ You also need CONFIG_MCONSOLE (under 'General Setup') enabled in UML.
+ When you boot UML, you'll see a line like:
+
+
+ mconsole initialized on /home/jdike/.uml/umlNJ32yL/mconsole
+
+
+
+
+ If you specify a unique machine id one the UML command line, i.e.
+
+
+ umid=debian
+
+
+
+
+ you'll see this
+
+
+ mconsole initialized on /home/jdike/.uml/debian/mconsole
+
+
+
+
+ That file is the socket that uml_mconsole will use to communicate with
+ UML. Run it with either the umid or the full path as its argument:
+
+
+ host% uml_mconsole debian
+
+
+
+
+ or
+
+
+ host% uml_mconsole /home/jdike/.uml/debian/mconsole
+
+
+
+
+ You'll get a prompt, at which you can run one of these commands:
+
+ +\bo version
+
+ +\bo halt
+
+ +\bo reboot
+
+ +\bo config
+
+ +\bo remove
+
+ +\bo sysrq
+
+ +\bo help
+
+ +\bo cad
+
+ +\bo stop
+
+ +\bo go
+
+
+ 1\b10\b0.\b.1\b1.\b. v\bve\ber\brs\bsi\bio\bon\bn
+
+ This takes no arguments. It prints the UML version.
+
+
+ (mconsole) version
+ OK Linux usermode 2.4.5-9um #1 Wed Jun 20 22:47:08 EDT 2001 i686
+
+
+
+
+ There are a couple actual uses for this. It's a simple no-op which
+ can be used to check that a UML is running. It's also a way of
+ sending an interrupt to the UML. This is sometimes useful on SMP
+ hosts, where there's a bug which causes signals to UML to be lost,
+ often causing it to appear to hang. Sending such a UML the mconsole
+ version command is a good way to 'wake it up' before networking has
+ been enabled, as it does not do anything to the function of the UML.
+
+
+
+ 1\b10\b0.\b.2\b2.\b. h\bha\bal\blt\bt a\ban\bnd\bd r\bre\beb\bbo\boo\bot\bt
+
+ These take no arguments. They shut the machine down immediately, with
+ no syncing of disks and no clean shutdown of userspace. So, they are
+ pretty close to crashing the machine.
+
+
+ (mconsole) halt
+ OK
+
+
+
+
+
+
+ 1\b10\b0.\b.3\b3.\b. c\bco\bon\bnf\bfi\big\bg
+
+ "config" adds a new device to the virtual machine. Currently the ubd
+ and network drivers support this. It takes one argument, which is the
+ device to add, with the same syntax as the kernel command line.
+
+
+
+
+ (mconsole)
+ config ubd3=/home/jdike/incoming/roots/root_fs_debian22
+
+ OK
+ (mconsole) config eth1=mcast
+ OK
+
+
+
+
+
+
+ 1\b10\b0.\b.4\b4.\b. r\bre\bem\bmo\bov\bve\be
+
+ "remove" deletes a device from the system. Its argument is just the
+ name of the device to be removed. The device must be idle in whatever
+ sense the driver considers necessary. In the case of the ubd driver,
+ the removed block device must not be mounted, swapped on, or otherwise
+ open, and in the case of the network driver, the device must be down.
+
+
+ (mconsole) remove ubd3
+ OK
+ (mconsole) remove eth1
+ OK
+
+
+
+
+
+
+ 1\b10\b0.\b.5\b5.\b. s\bsy\bys\bsr\brq\bq
+
+ This takes one argument, which is a single letter. It calls the
+ generic kernel's SysRq driver, which does whatever is called for by
+ that argument. See the SysRq documentation in Documentation/sysrq.txt
+ in your favorite kernel tree to see what letters are valid and what
+ they do.
+
+
+
+ 1\b10\b0.\b.6\b6.\b. h\bhe\bel\blp\bp
+
+ "help" returns a string listing the valid commands and what each one
+ does.
+
+
+
+ 1\b10\b0.\b.7\b7.\b. c\bca\bad\bd
+
+ This invokes the Ctl-Alt-Del action on init. What exactly this ends
+ up doing is up to /etc/inittab. Normally, it reboots the machine.
+ With UML, this is usually not desired, so if a halt would be better,
+ then find the section of inittab that looks like this
+
+
+ # What to do when CTRL-ALT-DEL is pressed.
+ ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now
+
+
+
+
+ and change the command to halt.
+
+
+
+ 1\b10\b0.\b.8\b8.\b. s\bst\bto\bop\bp
+
+ This puts the UML in a loop reading mconsole requests until a 'go'
+ mconsole command is received. This is very useful for making backups
+ of UML filesystems, as the UML can be stopped, then synced via 'sysrq
+ s', so that everything is written to the filesystem. You can then copy
+ the filesystem and then send the UML 'go' via mconsole.
+
+
+ Note that a UML running with more than one CPU will have problems
+ after you send the 'stop' command, as only one CPU will be held in a
+ mconsole loop and all others will continue as normal. This is a bug,
+ and will be fixed.
+
+
+
+ 1\b10\b0.\b.9\b9.\b. g\bgo\bo
+
+ This resumes a UML after being paused by a 'stop' command. Note that
+ when the UML has resumed, TCP connections may have timed out and if
+ the UML is paused for a long period of time, crond might go a little
+ crazy, running all the jobs it didn't do earlier.
+
+
+
+
+
+
+
+
+ 1\b11\b1.\b. K\bKe\ber\brn\bne\bel\bl d\bde\beb\bbu\bug\bgg\bgi\bin\bng\bg
+
+
+ N\bNo\bot\bte\be:\b: The interface that makes debugging, as described here, possible
+ is present in 2.4.0-test6 kernels and later.
+
+
+ Since the user-mode kernel runs as a normal Linux process, it is
+ possible to debug it with gdb almost like any other process. It is
+ slightly different because the kernel's threads are already being
+ ptraced for system call interception, so gdb can't ptrace them.
+ However, a mechanism has been added to work around that problem.
+
+
+ In order to debug the kernel, you need build it from source. See
+ ``Compiling the kernel and modules'' for information on doing that.
+ Make sure that you enable CONFIG_DEBUGSYM and CONFIG_PT_PROXY during
+ the config. These will compile the kernel with -g, and enable the
+ ptrace proxy so that gdb works with UML, respectively.
+
+
+
+
+ 1\b11\b1.\b.1\b1.\b. S\bSt\bta\bar\brt\bti\bin\bng\bg t\bth\bhe\be k\bke\ber\brn\bne\bel\bl u\bun\bnd\bde\ber\br g\bgd\bdb\bb
+
+ You can have the kernel running under the control of gdb from the
+ beginning by putting 'debug' on the command line. You will get an
+ xterm with gdb running inside it. The kernel will send some commands
+ to gdb which will leave it stopped at the beginning of start_kernel.
+ At this point, you can get things going with 'next', 'step', or
+ 'cont'.
+
+
+ There is a transcript of a debugging session here <debug-
+ session.html> , with breakpoints being set in the scheduler and in an
+ interrupt handler.
+ 1\b11\b1.\b.2\b2.\b. E\bEx\bxa\bam\bmi\bin\bni\bin\bng\bg s\bsl\ble\bee\bep\bpi\bin\bng\bg p\bpr\bro\boc\bce\bes\bss\bse\bes\bs
+
+ Not every bug is evident in the currently running process. Sometimes,
+ processes hang in the kernel when they shouldn't because they've
+ deadlocked on a semaphore or something similar. In this case, when
+ you ^C gdb and get a backtrace, you will see the idle thread, which
+ isn't very relevant.
+
+
+ What you want is the stack of whatever process is sleeping when it
+ shouldn't be. You need to figure out which process that is, which is
+ generally fairly easy. Then you need to get its host process id,
+ which you can do either by looking at ps on the host or at
+ task.thread.extern_pid in gdb.
+
+
+ Now what you do is this:
+
+ +\bo detach from the current thread
+
+
+ (UML gdb) det
+
+
+
+
+
+ +\bo attach to the thread you are interested in
+
+
+ (UML gdb) att <host pid>
+
+
+
+
+
+ +\bo look at its stack and anything else of interest
+
+
+ (UML gdb) bt
+
+
+
+
+ Note that you can't do anything at this point that requires that a
+ process execute, e.g. calling a function
+
+ +\bo when you're done looking at that process, reattach to the current
+ thread and continue it
+
+
+ (UML gdb)
+ att 1
+
+
+
+
+
+
+ (UML gdb)
+ c
+
+
+
+
+ Here, specifying any pid which is not the process id of a UML thread
+ will cause gdb to reattach to the current thread. I commonly use 1,
+ but any other invalid pid would work.
+
+
+
+ 1\b11\b1.\b.3\b3.\b. R\bRu\bun\bnn\bni\bin\bng\bg d\bdd\bdd\bd o\bon\bn U\bUM\bML\bL
+
+ ddd works on UML, but requires a special kludge. The process goes
+ like this:
+
+ +\bo Start ddd
+
+
+ host% ddd linux
+
+
+
+
+
+ +\bo With ps, get the pid of the gdb that ddd started. You can ask the
+ gdb to tell you, but for some reason that confuses things and
+ causes a hang.
+
+ +
\bo run UML with 'debug=parent gdb-pid=<pid>' added to the command line
+ - it will just sit there after you hit return
+
+ +\bo type 'att 1' to the ddd gdb and you will see something like
+
+
+ 0xa013dc51 in __kill ()
+
+
+ (gdb)
+
+
+
+
+
+ +\bo At this point, type 'c', UML will boot up, and you can use ddd just
+ as you do on any other process.
+
+
+
+ 1\b11\b1.\b.4\b4.\b. D\bDe\beb\bbu\bug\bgg\bgi\bin\bng\bg m\bmo\bod\bdu\bul\ble\bes\bs
+
+ gdb has support for debugging code which is dynamically loaded into
+ the process. This support is what is needed to debug kernel modules
+ under UML.
+
+
+ Using that support is somewhat complicated. You have to tell gdb what
+ object file you just loaded into UML and where in memory it is. Then,
+ it can read the symbol table, and figure out where all the symbols are
+ from the load address that you provided. It gets more interesting
+ when you load the module again (i.e. after an rmmod). You have to
+ tell gdb to forget about all its symbols, including the main UML ones
+ for some reason, then load then all back in again.
+
+
+ There's an easy way and a hard way to do this. The easy way is to use
+ the umlgdb expect script written by Chandan Kudige. It basically
+ automates the process for you.
+
+
+ First, you must tell it where your modules are. There is a list in
+ the script that looks like this:
+ set MODULE_PATHS {
+ "fat" "/usr/src/uml/linux-2.4.18/fs/fat/fat.o"
+ "isofs" "/usr/src/uml/linux-2.4.18/fs/isofs/isofs.o"
+ "minix" "/usr/src/uml/linux-2.4.18/fs/minix/minix.o"
+ }
+
+
+
+
+ You change that to list the names and paths of the modules that you
+ are going to debug. Then you run it from the toplevel directory of
+ your UML pool and it basically tells you what to do:
+
+
+
+
+ ******** GDB pid is 21903 ********
+ Start UML as: ./linux <kernel switches> debug gdb-pid=21903
+
+
+
+ GNU gdb 5.0rh-5 Red Hat Linux 7.1
+ Copyright 2001 Free Software Foundation, Inc.
+ GDB is free software, covered by the GNU General Public License, and you are
+ welcome to change it and/or distribute copies of it under certain conditions.
+ Type "show copying" to see the conditions.
+ There is absolutely no warranty for GDB. Type "show warranty" for details.
+ This GDB was configured as "i386-redhat-linux"...
+ (gdb) b sys_init_module
+ Breakpoint 1 at 0xa0011923: file module.c, line 349.
+ (gdb) att 1
+
+
+
+
+ After you run UML and it sits there doing nothing, you hit return at
+ the 'att 1' and continue it:
+
+
+ Attaching to program: /home/jdike/linux/2.4/um/./linux, process 1
+ 0xa00f4221 in __kill ()
+ (UML gdb) c
+ Continuing.
+
+
+
+
+ At this point, you debug normally. When you insmod something, the
+ expect magic will kick in and you'll see something like:
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ *** Module hostfs loaded ***
+ Breakpoint 1, sys_init_module (name_user=0x805abb0 "hostfs",
+ mod_user=0x8070e00) at module.c:349
+ 349 char *name, *n_name, *name_tmp = NULL;
+ (UML gdb) finish
+ Run till exit from #0 sys_init_module (name_user=0x805abb0 "hostfs",
+ mod_user=0x8070e00) at module.c:349
+ 0xa00e2e23 in execute_syscall (r=0xa8140284) at syscall_kern.c:411
+ 411 else res = EXECUTE_SYSCALL(syscall, regs);
+ Value returned is $1 = 0
+ (UML gdb)
+ p/x (int)module_list + module_list->size_of_struct
+
+ $2 = 0xa9021054
+ (UML gdb) symbol-file ./linux
+ Load new symbol table from "./linux"? (y or n) y
+ Reading symbols from ./linux...
+ done.
+ (UML gdb)
+ add-symbol-file /home/jdike/linux/2.4/um/arch/um/fs/hostfs/hostfs.o 0xa9021054
+
+ add symbol table from file "/home/jdike/linux/2.4/um/arch/um/fs/hostfs/hostfs.o" at
+ .text_addr = 0xa9021054
+ (y or n) y
+
+ Reading symbols from /home/jdike/linux/2.4/um/arch/um/fs/hostfs/hostfs.o...
+ done.
+ (UML gdb) p *module_list
+ $1 = {size_of_struct = 84, next = 0xa0178720, name = 0xa9022de0 "hostfs",
+ size = 9016, uc = {usecount = {counter = 0}, pad = 0}, flags = 1,
+ nsyms = 57, ndeps = 0, syms = 0xa9023170, deps = 0x0, refs = 0x0,
+ init = 0xa90221f0 <init_hostfs>, cleanup = 0xa902222c <exit_hostfs>,
+ ex_table_start = 0x0, ex_table_end = 0x0, persist_start = 0x0,
+ persist_end = 0x0, can_unload = 0, runsize = 0, kallsyms_start = 0x0,
+ kallsyms_end = 0x0,
+ archdata_start = 0x1b855 <Address 0x1b855 out of bounds>,
+ archdata_end = 0xe5890000 <Address 0xe5890000 out of bounds>,
+ kernel_data = 0xf689c35d <Address 0xf689c35d out of bounds>}
+ >> Finished loading symbols for hostfs ...
+
+
+
+
+ That's the easy way. It's highly recommended. The hard way is
+ described below in case you're interested in what's going on.
+
+
+ Boot the kernel under the debugger and load the module with insmod or
+ modprobe. With gdb, do:
+
+
+ (UML gdb) p module_list
+
+
+
+
+ This is a list of modules that have been loaded into the kernel, with
+ the most recently loaded module first. Normally, the module you want
+ is at module_list. If it's not, walk down the next links, looking at
+ the name fields until find the module you want to debug. Take the
+ address of that structure, and add module.size_of_struct (which in
+ 2.4.10 kernels is 96 (0x60)) to it. Gdb can make this hard addition
+ for you :-):
+
+
+
+ (UML gdb)
+ printf "%#x\n", (int)module_list module_list->size_of_struct
+
+
+
+
+ The offset from the module start occasionally changes (before 2.4.0,
+ it was module.size_of_struct + 4), so it's a good idea to check the
+ init and cleanup addresses once in a while, as describe below. Now
+ do:
+
+
+ (UML gdb)
+ add-symbol-file /path/to/module/on/host that_address
+
+
+
+
+ Tell gdb you really want to do it, and you're in business.
+
+
+ If there's any doubt that you got the offset right, like breakpoints
+ appear not to work, or they're appearing in the wrong place, you can
+ check it by looking at the module structure. The init and cleanup
+ fields should look like:
+
+
+ init = 0x588066b0 <init_hostfs>, cleanup = 0x588066c0 <exit_hostfs>
+
+
+
+
+ with no offsets on the symbol names. If the names are right, but they
+ are offset, then the offset tells you how much you need to add to the
+ address you gave to add-symbol-file.
+
+
+ When you want to load in a new version of the module, you need to get
+ gdb to forget about the old one. The only way I've found to do that
+ is to tell gdb to forget about all symbols that it knows about:
+
+
+ (UML gdb) symbol-file
+
+
+
+
+ Then reload the symbols from the kernel binary:
+
+
+ (UML gdb) symbol-file /path/to/kernel
+
+
+
+
+ and repeat the process above. You'll also need to re-enable break-
+ points. They were disabled when you dumped all the symbols because
+ gdb couldn't figure out where they should go.
+
+
+
+ 1\b11\b1.\b.5\b5.\b. A\bAt\btt\bta\bac\bch\bhi\bin\bng\bg g\bgd\bdb\bb t\bto\bo t\bth\bhe\be k\bke\ber\brn\bne\bel\bl
+
+ If you don't have the kernel running under gdb, you can attach gdb to
+ it later by sending the tracing thread a SIGUSR1. The first line of
+ the console output identifies its pid:
+ tracing thread pid = 20093
+
+
+
+
+ When you send it the signal:
+
+
+ host% kill -USR1 20093
+
+
+
+
+ you will get an xterm with gdb running in it.
+
+
+ If you have the mconsole compiled into UML, then the mconsole client
+ can be used to start gdb:
+
+
+ (mconsole) (mconsole) config gdb=xterm
+
+
+
+
+ will fire up an xterm with gdb running in it.
+
+
+
+ 1\b11\b1.\b.6\b6.\b. U\bUs\bsi\bin\bng\bg a\bal\blt\bte\ber\brn\bna\bat\bte\be d\bde\beb\bbu\bug\bgg\bge\ber\brs\bs
+
+ UML has support for attaching to an already running debugger rather
+ than starting gdb itself. This is present in CVS as of 17 Apr 2001.
+ I sent it to Alan for inclusion in the ac tree, and it will be in my
+ 2.4.4 release.
+
+
+ This is useful when gdb is a subprocess of some UI, such as emacs or
+ ddd. It can also be used to run debuggers other than gdb on UML.
+ Below is an example of using strace as an alternate debugger.
+
+
+ To do this, you need to get the pid of the debugger and pass it in
+ with the
+
+
+ If you are using gdb under some UI, then tell it to 'att 1', and
+ you'll find yourself attached to UML.
+
+
+ If you are using something other than gdb as your debugger, then
+ you'll need to get it to do the equivalent of 'att 1' if it doesn't do
+ it automatically.
+
+
+ An example of an alternate debugger is strace. You can strace the
+ actual kernel as follows:
+
+ +\bo Run the following in a shell
+
+
+ host%
+ sh -c 'echo pid=$$; echo -n hit return; read x; exec strace -p 1 -o strace.out'
+
+
+
+ +
\bo Run UML with 'debug' and 'gdb-pid=<pid>' with the pid printed out
+ by the previous command
+
+ +\bo Hit return in the shell, and UML will start running, and strace
+ output will start accumulating in the output file.
+
+ Note that this is different from running
+
+
+ host% strace ./linux
+
+
+
+
+ That will strace only the main UML thread, the tracing thread, which
+ doesn't do any of the actual kernel work. It just oversees the vir-
+ tual machine. In contrast, using strace as described above will show
+ you the low-level activity of the virtual machine.
+
+
+
+
+
+ 1\b12\b2.\b. K\bKe\ber\brn\bne\bel\bl d\bde\beb\bbu\bug\bgg\bgi\bin\bng\bg e\bex\bxa\bam\bmp\bpl\ble\bes\bs
+
+ 1\b12\b2.\b.1\b1.\b. T\bTh\bhe\be c\bca\bas\bse\be o\bof\bf t\bth\bhe\be h\bhu\bun\bng\bg f\bfs\bsc\bck\bk
+
+ When booting up the kernel, fsck failed, and dropped me into a shell
+ to fix things up. I ran fsck -y, which hung:
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ Setting hostname uml [ OK ]
+ Checking root filesystem
+ /dev/fhd0 was not cleanly unmounted, check forced.
+ Error reading block 86894 (Attempt to read block from filesystem resulted in short read) while reading indirect blocks of inode 19780.
+
+ /dev/fhd0: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
+ (i.e., without -a or -p options)
+ [ FAILED ]
+
+ *** An error occurred during the file system check.
+ *** Dropping you to a shell; the system will reboot
+ *** when you leave the shell.
+ Give root password for maintenance
+ (or type Control-D for normal startup):
+
+ [root@uml /root]# fsck -y /dev/fhd0
+ fsck -y /dev/fhd0
+ Parallelizing fsck version 1.14 (9-Jan-1999)
+ e2fsck 1.14, 9-Jan-1999 for EXT2 FS 0.5b, 95/08/09
+ /dev/fhd0 contains a file system with errors, check forced.
+ Pass 1: Checking inodes, blocks, and sizes
+ Error reading block 86894 (Attempt to read block from filesystem resulted in short read) while reading indirect blocks of inode 19780. Ignore error? yes
+
+ Inode 19780, i_blocks is 1548, should be 540. Fix? yes
+
+ Pass 2: Checking directory structure
+ Error reading block 49405 (Attempt to read block from filesystem resulted in short read). Ignore error? yes
+
+ Directory inode 11858, block 0, offset 0: directory corrupted
+ Salvage? yes
+
+ Missing '.' in directory inode 11858.
+ Fix? yes
+
+ Missing '..' in directory inode 11858.
+ Fix? yes
+
+
+
+
+
+ The standard drill in this sort of situation is to fire up gdb on the
+ signal thread, which, in this case, was pid 1935. In another window,
+ I run gdb and attach pid 1935.
+
+
+
+
+ ~/linux/2.3.26/um 1016: gdb linux
+ GNU gdb 4.17.0.11 with Linux support
+ Copyright 1998 Free Software Foundation, Inc.
+ GDB is free software, covered by the GNU General Public License, and you are
+ welcome to change it and/or distribute copies of it under certain conditions.
+ Type "show copying" to see the conditions.
+ There is absolutely no warranty for GDB. Type "show warranty" for details.
+ This GDB was configured as "i386-redhat-linux"...
+
+ (gdb) att 1935
+ Attaching to program `/home/dike/linux/2.3.26/um/linux', Pid 1935
+ 0x100756d9 in __wait4 ()
+
+
+
+
+
+
+ Let's see what's currently running:
+
+
+
+ (gdb) p current_task.pid
+ $1 = 0
+
+
+
+
+
+ It's the idle thread, which means that fsck went to sleep for some
+ reason and never woke up.
+
+
+ Let's guess that the last process in the process list is fsck:
+
+
+
+ (gdb) p current_task.prev_task.comm
+ $13 = "fsck.ext2\000\000\000\000\000\000"
+
+
+
+
+
+ It is, so let's see what it thinks it's up to:
+
+
+
+ (gdb) p current_task.prev_task.thread
+ $14 = {extern_pid = 1980, tracing = 0, want_tracing = 0, forking = 0,
+ kernel_stack_page = 0, signal_stack = 1342627840, syscall = {id = 4, args = {
+ 3, 134973440, 1024, 0, 1024}, have_result = 0, result = 50590720},
+ request = {op = 2, u = {exec = {ip = 1350467584, sp = 2952789424}, fork = {
+ regs = {1350467584, 2952789424, 0 <repeats 15 times>}, sigstack = 0,
+ pid = 0}, switch_to = 0x507e8000, thread = {proc = 0x507e8000,
+ arg = 0xaffffdb0, flags = 0, new_pid = 0}, input_request = {
+ op = 1350467584, fd = -1342177872, proc = 0, pid = 0}}}}
+
+
+
+
+
+ The interesting things here are the fact that its .thread.syscall.id
+ is __NR_write (see the big switch in arch/um/kernel/syscall_kern.c or
+ the defines in include/asm-um/arch/unistd.h), and that it never
+ returned. Also, its .request.op is OP_SWITCH (see
+ arch/um/include/user_util.h). These mean that it went into a write,
+ and, for some reason, called schedule().
+
+
+ The fact that it never returned from write means that its stack should
+ be fairly interesting. Its pid is 1980 (.thread.extern_pid). That
+ process is being ptraced by the signal thread, so it must be detached
+ before gdb can attach it:
+
+
+
+
+
+
+
+
+
+
+ (gdb) call detach(1980)
+
+ Program received signal SIGSEGV, Segmentation fault.
+ <function called from gdb>
+ The program being debugged stopped while in a function called from GDB.
+ When the function (detach) is done executing, GDB will silently
+ stop (instead of continuing to evaluate the expression containing
+ the function call).
+ (gdb) call detach(1980)
+ $15 = 0
+
+
+
+
+
+ The first detach segfaults for some reason, and the second one
+ succeeds.
+
+
+ Now I detach from the signal thread, attach to the fsck thread, and
+ look at its stack:
+
+
+ (gdb) det
+ Detaching from program: /home/dike/linux/2.3.26/um/linux Pid 1935
+ (gdb) att 1980
+ Attaching to program `/home/dike/linux/2.3.26/um/linux', Pid 1980
+ 0x10070451 in __kill ()
+ (gdb) bt
+ #0 0x10070451 in __kill ()
+ #1 0x10068ccd in usr1_pid (pid=1980) at process.c:30
+ #2 0x1006a03f in _switch_to (prev=0x50072000, next=0x507e8000)
+ at process_kern.c:156
+ #3 0x1006a052 in switch_to (prev=0x50072000, next=0x507e8000, last=0x50072000)
+ at process_kern.c:161
+ #4 0x10001d12 in schedule () at sched.c:777
+ #5 0x1006a744 in __down (sem=0x507d241c) at semaphore.c:71
+ #6 0x1006aa10 in __down_failed () at semaphore.c:157
+ #7 0x1006c5d8 in segv_handler (sc=0x5006e940) at trap_user.c:174
+ #8 0x1006c5ec in kern_segv_handler (sig=11) at trap_user.c:182
+ #9 <signal handler called>
+ #10 0x10155404 in errno ()
+ #11 0x1006c0aa in segv (address=1342179328, is_write=2) at trap_kern.c:50
+ #12 0x1006c5d8 in segv_handler (sc=0x5006eaf8) at trap_user.c:174
+ #13 0x1006c5ec in kern_segv_handler (sig=11) at trap_user.c:182
+ #14 <signal handler called>
+ #15 0xc0fd in ?? ()
+ #16 0x10016647 in sys_write (fd=3,
+ buf=0x80b8800 <Address 0x80b8800 out of bounds>, count=1024)
+ at read_write.c:159
+ #17 0x1006d5b3 in execute_syscall (syscall=4, args=0x5006ef08)
+ at syscall_kern.c:254
+ #18 0x1006af87 in really_do_syscall (sig=12) at syscall_user.c:35
+ #19 <signal handler called>
+ #20 0x400dc8b0 in ?? ()
+
+
+
+
+
+ The interesting things here are :
+
+ +\bo There are two segfaults on this stack (frames 9 and 14)
+
+ +\bo The first faulting address (frame 11) is 0x50000800
+
+ (gdb) p (void *)1342179328
+ $16 = (void *) 0x50000800
+
+
+
+
+
+ The initial faulting address is interesting because it is on the idle
+ thread's stack. I had been seeing the idle thread segfault for no
+ apparent reason, and the cause looked like stack corruption. In hopes
+ of catching the culprit in the act, I had turned off all protections
+ to that stack while the idle thread wasn't running. This apparently
+ tripped that trap.
+
+
+ However, the more immediate problem is that second segfault and I'm
+ going to concentrate on that. First, I want to see where the fault
+ happened, so I have to go look at the sigcontent struct in frame 8:
+
+
+
+ (gdb) up
+ #1 0x10068ccd in usr1_pid (pid=1980) at process.c:30
+ 30 kill(pid, SIGUSR1);
+ (gdb)
+ #2 0x1006a03f in _switch_to (prev=0x50072000, next=0x507e8000)
+ at process_kern.c:156
+ 156 usr1_pid(getpid());
+ (gdb)
+ #3 0x1006a052 in switch_to (prev=0x50072000, next=0x507e8000, last=0x50072000)
+ at process_kern.c:161
+ 161 _switch_to(prev, next);
+ (gdb)
+ #4 0x10001d12 in schedule () at sched.c:777
+ 777 switch_to(prev, next, prev);
+ (gdb)
+ #5 0x1006a744 in __down (sem=0x507d241c) at semaphore.c:71
+ 71 schedule();
+ (gdb)
+ #6 0x1006aa10 in __down_failed () at semaphore.c:157
+ 157 }
+ (gdb)
+ #7 0x1006c5d8 in segv_handler (sc=0x5006e940) at trap_user.c:174
+ 174 segv(sc->cr2, sc->err & 2);
+ (gdb)
+ #8 0x1006c5ec in kern_segv_handler (sig=11) at trap_user.c:182
+ 182 segv_handler(sc);
+ (gdb) p *sc
+ Cannot access memory at address 0x0.
+
+
+
+
+ That's not very useful, so I'll try a more manual method:
+
+
+ (gdb) p *((struct sigcontext *) (&sig + 1))
+ $19 = {gs = 0, __gsh = 0, fs = 0, __fsh = 0, es = 43, __esh = 0, ds = 43,
+ __dsh = 0, edi = 1342179328, esi = 1350378548, ebp = 1342630440,
+ esp = 1342630420, ebx = 1348150624, edx = 1280, ecx = 0, eax = 0,
+ trapno = 14, err = 4, eip = 268480945, cs = 35, __csh = 0, eflags = 66118,
+ esp_at_signal = 1342630420, ss = 43, __ssh = 0, fpstate = 0x0, oldmask = 0,
+ cr2 = 1280}
+
+
+
+ The ip is in handle_mm_fault:
+
+
+ (gdb) p (void *)268480945
+ $20 = (void *) 0x1000b1b1
+ (gdb) i sym $20
+ handle_mm_fault + 57 in section .text
+
+
+
+
+
+ Specifically, it's in pte_alloc:
+
+
+ (gdb) i line *$20
+ Line 124 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h"
+ starts at address 0x1000b1b1 <handle_mm_fault+57>
+ and ends at 0x1000b1b7 <handle_mm_fault+63>.
+
+
+
+
+
+ To find where in handle_mm_fault this is, I'll jump forward in the
+ code until I see an address in that procedure:
+
+
+
+ (gdb) i line *0x1000b1c0
+ Line 126 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h"
+ starts at address 0x1000b1b7 <handle_mm_fault+63>
+ and ends at 0x1000b1c3 <handle_mm_fault+75>.
+ (gdb) i line *0x1000b1d0
+ Line 131 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h"
+ starts at address 0x1000b1d0 <handle_mm_fault+88>
+ and ends at 0x1000b1da <handle_mm_fault+98>.
+ (gdb) i line *0x1000b1e0
+ Line 61 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h"
+ starts at address 0x1000b1da <handle_mm_fault+98>
+ and ends at 0x1000b1e1 <handle_mm_fault+105>.
+ (gdb) i line *0x1000b1f0
+ Line 134 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h"
+ starts at address 0x1000b1f0 <handle_mm_fault+120>
+ and ends at 0x1000b200 <handle_mm_fault+136>.
+ (gdb) i line *0x1000b200
+ Line 135 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h"
+ starts at address 0x1000b200 <handle_mm_fault+136>
+ and ends at 0x1000b208 <handle_mm_fault+144>.
+ (gdb) i line *0x1000b210
+ Line 139 of "/home/dike/linux/2.3.26/um/include/asm/pgalloc.h"
+ starts at address 0x1000b210 <handle_mm_fault+152>
+ and ends at 0x1000b219 <handle_mm_fault+161>.
+ (gdb) i line *0x1000b220
+ Line 1168 of "memory.c" starts at address 0x1000b21e <handle_mm_fault+166>
+ and ends at 0x1000b222 <handle_mm_fault+170>.
+
+
+
+
+
+ Something is apparently wrong with the page tables or vma_structs, so
+ lets go back to frame 11 and have a look at them:
+
+
+
+ #11 0x1006c0aa in segv (address=1342179328, is_write=2) at trap_kern.c:50
+ 50 handle_mm_fault(current, vma, address, is_write);
+ (gdb) call pgd_offset_proc(vma->vm_mm, address)
+ $22 = (pgd_t *) 0x80a548c
+
+
+
+
+
+ That's pretty bogus. Page tables aren't supposed to be in process
+ text or data areas. Let's see what's in the vma:
+
+
+ (gdb) p *vma
+ $23 = {vm_mm = 0x507d2434, vm_start = 0, vm_end = 134512640,
+ vm_next = 0x80a4f8c, vm_page_prot = {pgprot = 0}, vm_flags = 31200,
+ vm_avl_height = 2058, vm_avl_left = 0x80a8c94, vm_avl_right = 0x80d1000,
+ vm_next_share = 0xaffffdb0, vm_pprev_share = 0xaffffe63,
+ vm_ops = 0xaffffe7a, vm_pgoff = 2952789626, vm_file = 0xafffffec,
+ vm_private_data = 0x62}
+ (gdb) p *vma.vm_mm
+ $24 = {mmap = 0x507d2434, mmap_avl = 0x0, mmap_cache = 0x8048000,
+ pgd = 0x80a4f8c, mm_users = {counter = 0}, mm_count = {counter = 134904288},
+ map_count = 134909076, mmap_sem = {count = {counter = 135073792},
+ sleepers = -1342177872, wait = {lock = <optimized out or zero length>,
+ task_list = {next = 0xaffffe63, prev = 0xaffffe7a},
+ __magic = -1342177670, __creator = -1342177300}, __magic = 98},
+ page_table_lock = {}, context = 138, start_code = 0, end_code = 0,
+ start_data = 0, end_data = 0, start_brk = 0, brk = 0, start_stack = 0,
+ arg_start = 0, arg_end = 0, env_start = 0, env_end = 0, rss = 1350381536,
+ total_vm = 0, locked_vm = 0, def_flags = 0, cpu_vm_mask = 0, swap_cnt = 0,
+ swap_address = 0, segments = 0x0}
+
+
+
+
+
+ This also pretty bogus. With all of the 0x80xxxxx and 0xaffffxxx
+ addresses, this is looking like a stack was plonked down on top of
+ these structures. Maybe it's a stack overflow from the next page:
+
+
+
+ (gdb) p vma
+ $25 = (struct vm_area_struct *) 0x507d2434
+
+
+
+
+
+ That's towards the lower quarter of the page, so that would have to
+ have been pretty heavy stack overflow:
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ (gdb) x/100x $25
+ 0x507d2434: 0x507d2434 0x00000000 0x08048000 0x080a4f8c
+ 0x507d2444: 0x00000000 0x080a79e0 0x080a8c94 0x080d1000
+ 0x507d2454: 0xaffffdb0 0xaffffe63 0xaffffe7a 0xaffffe7a
+ 0x507d2464: 0xafffffec 0x00000062 0x0000008a 0x00000000
+ 0x507d2474: 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x507d2484: 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x507d2494: 0x00000000 0x00000000 0x507d2fe0 0x00000000
+ 0x507d24a4: 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x507d24b4: 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x507d24c4: 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x507d24d4: 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x507d24e4: 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x507d24f4: 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x507d2504: 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x507d2514: 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x507d2524: 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x507d2534: 0x00000000 0x00000000 0x507d25dc 0x00000000
+ 0x507d2544: 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x507d2554: 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x507d2564: 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x507d2574: 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x507d2584: 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x507d2594: 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x507d25a4: 0x00000000 0x00000000 0x00000000 0x00000000
+ 0x507d25b4: 0x00000000 0x00000000 0x00000000 0x00000000
+
+
+
+
+
+ It's not stack overflow. The only "stack-like" piece of this data is
+ the vma_struct itself.
+
+
+ At this point, I don't see any avenues to pursue, so I just have to
+ admit that I have no idea what's going on. What I will do, though, is
+ stick a trap on the segfault handler which will stop if it sees any
+ writes to the idle thread's stack. That was the thing that happened
+ first, and it may be that if I can catch it immediately, what's going
+ on will be somewhat clearer.
+
+
+ 1\b12\b2.\b.2\b2.\b. E\bEp\bpi\bis\bso\bod\bde\be 2\b2:\b: T\bTh\bhe\be c\bca\bas\bse\be o\bof\bf t\bth\bhe\be h\bhu\bun\bng\bg f\bfs\bsc\bck\bk
+
+ After setting a trap in the SEGV handler for accesses to the signal
+ thread's stack, I reran the kernel.
+
+
+ fsck hung again, this time by hitting the trap:
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ Setting hostname uml [ OK ]
+ Checking root filesystem
+ /dev/fhd0 contains a file system with errors, check forced.
+ Error reading block 86894 (Attempt to read block from filesystem resulted in short read) while reading indirect blocks of inode 19780.
+
+ /dev/fhd0: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
+ (i.e., without -a or -p options)
+ [ FAILED ]
+
+ *** An error occurred during the file system check.
+ *** Dropping you to a shell; the system will reboot
+ *** when you leave the shell.
+ Give root password for maintenance
+ (or type Control-D for normal startup):
+
+ [root@uml /root]# fsck -y /dev/fhd0
+ fsck -y /dev/fhd0
+ Parallelizing fsck version 1.14 (9-Jan-1999)
+ e2fsck 1.14, 9-Jan-1999 for EXT2 FS 0.5b, 95/08/09
+ /dev/fhd0 contains a file system with errors, check forced.
+ Pass 1: Checking inodes, blocks, and sizes
+ Error reading block 86894 (Attempt to read block from filesystem resulted in short read) while reading indirect blocks of inode 19780. Ignore error? yes
+
+ Pass 2: Checking directory structure
+ Error reading block 49405 (Attempt to read block from filesystem resulted in short read). Ignore error? yes
+
+ Directory inode 11858, block 0, offset 0: directory corrupted
+ Salvage? yes
+
+ Missing '.' in directory inode 11858.
+ Fix? yes
+
+ Missing '..' in directory inode 11858.
+ Fix? yes
+
+ Untested (4127) [100fe44c]: trap_kern.c line 31
+
+
+
+
+
+ I need to get the signal thread to detach from pid 4127 so that I can
+ attach to it with gdb. This is done by sending it a SIGUSR1, which is
+ caught by the signal thread, which detaches the process:
+
+
+ kill -USR1 4127
+
+
+
+
+
+ Now I can run gdb on it:
+
+
+
+
+
+
+
+
+
+
+
+
+
+ ~/linux/2.3.26/um 1034: gdb linux
+ GNU gdb 4.17.0.11 with Linux support
+ Copyright 1998 Free Software Foundation, Inc.
+ GDB is free software, covered by the GNU General Public License, and you are
+ welcome to change it and/or distribute copies of it under certain conditions.
+ Type "show copying" to see the conditions.
+ There is absolutely no warranty for GDB. Type "show warranty" for details.
+ This GDB was configured as "i386-redhat-linux"...
+ (gdb) att 4127
+ Attaching to program `/home/dike/linux/2.3.26/um/linux', Pid 4127
+ 0x10075891 in __libc_nanosleep ()
+
+
+
+
+
+ The backtrace shows that it was in a write and that the fault address
+ (address in frame 3) is 0x50000800, which is right in the middle of
+ the signal thread's stack page:
+
+
+ (gdb) bt
+ #0 0x10075891 in __libc_nanosleep ()
+ #1 0x1007584d in __sleep (seconds=1000000)
+ at ../sysdeps/unix/sysv/linux/sleep.c:78
+ #2 0x1006ce9a in stop () at user_util.c:191
+ #3 0x1006bf88 in segv (address=1342179328, is_write=2) at trap_kern.c:31
+ #4 0x1006c628 in segv_handler (sc=0x5006eaf8) at trap_user.c:174
+ #5 0x1006c63c in kern_segv_handler (sig=11) at trap_user.c:182
+ #6 <signal handler called>
+ #7 0xc0fd in ?? ()
+ #8 0x10016647 in sys_write (fd=3, buf=0x80b8800 "R.", count=1024)
+ at read_write.c:159
+ #9 0x1006d603 in execute_syscall (syscall=4, args=0x5006ef08)
+ at syscall_kern.c:254
+ #10 0x1006af87 in really_do_syscall (sig=12) at syscall_user.c:35
+ #11 <signal handler called>
+ #12 0x400dc8b0 in ?? ()
+ #13 <signal handler called>
+ #14 0x400dc8b0 in ?? ()
+ #15 0x80545fd in ?? ()
+ #16 0x804daae in ?? ()
+ #17 0x8054334 in ?? ()
+ #18 0x804d23e in ?? ()
+ #19 0x8049632 in ?? ()
+ #20 0x80491d2 in ?? ()
+ #21 0x80596b5 in ?? ()
+ (gdb) p (void *)1342179328
+ $3 = (void *) 0x50000800
+
+
+
+
+
+ Going up the stack to the segv_handler frame and looking at where in
+ the code the access happened shows that it happened near line 110 of
+ block_dev.c:
+
+
+
+
+
+
+
+
+
+ (gdb) up
+ #1 0x1007584d in __sleep (seconds=1000000)
+ at ../sysdeps/unix/sysv/linux/sleep.c:78
+ ../sysdeps/unix/sysv/linux/sleep.c:78: No such file or directory.
+ (gdb)
+ #2 0x1006ce9a in stop () at user_util.c:191
+ 191 while(1) sleep(1000000);
+ (gdb)
+ #3 0x1006bf88 in segv (address=1342179328, is_write=2) at trap_kern.c:31
+ 31 KERN_UNTESTED();
+ (gdb)
+ #4 0x1006c628 in segv_handler (sc=0x5006eaf8) at trap_user.c:174
+ 174 segv(sc->cr2, sc->err & 2);
+ (gdb) p *sc
+ $1 = {gs = 0, __gsh = 0, fs = 0, __fsh = 0, es = 43, __esh = 0, ds = 43,
+ __dsh = 0, edi = 1342179328, esi = 134973440, ebp = 1342631484,
+ esp = 1342630864, ebx = 256, edx = 0, ecx = 256, eax = 1024, trapno = 14,
+ err = 6, eip = 268550834, cs = 35, __csh = 0, eflags = 66070,
+ esp_at_signal = 1342630864, ss = 43, __ssh = 0, fpstate = 0x0, oldmask = 0,
+ cr2 = 1342179328}
+ (gdb) p (void *)268550834
+ $2 = (void *) 0x1001c2b2
+ (gdb) i sym $2
+ block_write + 1090 in section .text
+ (gdb) i line *$2
+ Line 209 of "/home/dike/linux/2.3.26/um/include/asm/arch/string.h"
+ starts at address 0x1001c2a1 <block_write+1073>
+ and ends at 0x1001c2bf <block_write+1103>.
+ (gdb) i line *0x1001c2c0
+ Line 110 of "block_dev.c" starts at address 0x1001c2bf <block_write+1103>
+ and ends at 0x1001c2e3 <block_write+1139>.
+
+
+
+
+
+ Looking at the source shows that the fault happened during a call to
+ copy_to_user to copy the data into the kernel:
+
+
+ 107 count -= chars;
+ 108 copy_from_user(p,buf,chars);
+ 109 p += chars;
+ 110 buf += chars;
+
+
+
+
+
+ p is the pointer which must contain 0x50000800, since buf contains
+ 0x80b8800 (frame 8 above). It is defined as:
+
+
+ p = offset + bh->b_data;
+
+
+
+
+
+ I need to figure out what bh is, and it just so happens that bh is
+ passed as an argument to mark_buffer_uptodate and mark_buffer_dirty a
+ few lines later, so I do a little disassembly:
+
+
+
+
+ (gdb) disas 0x1001c2bf 0x1001c2e0
+ Dump of assembler code from 0x1001c2bf to 0x1001c2d0:
+ 0x1001c2bf <block_write+1103>: addl %eax,0xc(%ebp)
+ 0x1001c2c2 <block_write+1106>: movl 0xfffffdd4(%ebp),%edx
+ 0x1001c2c8 <block_write+1112>: btsl $0x0,0x18(%edx)
+ 0x1001c2cd <block_write+1117>: btsl $0x1,0x18(%edx)
+ 0x1001c2d2 <block_write+1122>: sbbl %ecx,%ecx
+ 0x1001c2d4 <block_write+1124>: testl %ecx,%ecx
+ 0x1001c2d6 <block_write+1126>: jne 0x1001c2e3 <block_write+1139>
+ 0x1001c2d8 <block_write+1128>: pushl $0x0
+ 0x1001c2da <block_write+1130>: pushl %edx
+ 0x1001c2db <block_write+1131>: call 0x1001819c <__mark_buffer_dirty>
+ End of assembler dump.
+
+
+
+
+
+ At that point, bh is in %edx (address 0x1001c2da), which is calculated
+ at 0x1001c2c2 as %ebp + 0xfffffdd4, so I figure exactly what that is,
+ taking %ebp from the sigcontext_struct above:
+
+
+ (gdb) p (void *)1342631484
+ $5 = (void *) 0x5006ee3c
+ (gdb) p 0x5006ee3c+0xfffffdd4
+ $6 = 1342630928
+ (gdb) p (void *)$6
+ $7 = (void *) 0x5006ec10
+ (gdb) p *((void **)$7)
+ $8 = (void *) 0x50100200
+
+
+
+
+
+ Now, I look at the structure to see what's in it, and particularly,
+ what its b_data field contains:
+
+
+ (gdb) p *((struct buffer_head *)0x50100200)
+ $13 = {b_next = 0x50289380, b_blocknr = 49405, b_size = 1024, b_list = 0,
+ b_dev = 15872, b_count = {counter = 1}, b_rdev = 15872, b_state = 24,
+ b_flushtime = 0, b_next_free = 0x501001a0, b_prev_free = 0x50100260,
+ b_this_page = 0x501001a0, b_reqnext = 0x0, b_pprev = 0x507fcf58,
+ b_data = 0x50000800 "", b_page = 0x50004000,
+ b_end_io = 0x10017f60 <end_buffer_io_sync>, b_dev_id = 0x0,
+ b_rsector = 98810, b_wait = {lock = <optimized out or zero length>,
+ task_list = {next = 0x50100248, prev = 0x50100248}, __magic = 1343226448,
+ __creator = 0}, b_kiobuf = 0x0}
+
+
+
+
+
+ The b_data field is indeed 0x50000800, so the question becomes how
+ that happened. The rest of the structure looks fine, so this probably
+ is not a case of data corruption. It happened on purpose somehow.
+
+
+ The b_page field is a pointer to the page_struct representing the
+ 0x50000000 page. Looking at it shows the kernel's idea of the state
+ of that page:
+
+
+
+ (gdb) p *$13.b_page
+ $17 = {list = {next = 0x50004a5c, prev = 0x100c5174}, mapping = 0x0,
+ index = 0, next_hash = 0x0, count = {counter = 1}, flags = 132, lru = {
+ next = 0x50008460, prev = 0x50019350}, wait = {
+ lock = <optimized out or zero length>, task_list = {next = 0x50004024,
+ prev = 0x50004024}, __magic = 1342193708, __creator = 0},
+ pprev_hash = 0x0, buffers = 0x501002c0, virtual = 1342177280,
+ zone = 0x100c5160}
+
+
+
+
+
+ Some sanity-checking: the virtual field shows the "virtual" address of
+ this page, which in this kernel is the same as its "physical" address,
+ and the page_struct itself should be mem_map[0], since it represents
+ the first page of memory:
+
+
+
+ (gdb) p (void *)1342177280
+ $18 = (void *) 0x50000000
+ (gdb) p mem_map
+ $19 = (mem_map_t *) 0x50004000
+
+
+
+
+
+ These check out fine.
+
+
+ Now to check out the page_struct itself. In particular, the flags
+ field shows whether the page is considered free or not:
+
+
+ (gdb) p (void *)132
+ $21 = (void *) 0x84
+
+
+
+
+
+ The "reserved" bit is the high bit, which is definitely not set, so
+ the kernel considers the signal stack page to be free and available to
+ be used.
+
+
+ At this point, I jump to conclusions and start looking at my early
+ boot code, because that's where that page is supposed to be reserved.
+
+
+ In my setup_arch procedure, I have the following code which looks just
+ fine:
+
+
+
+ bootmap_size = init_bootmem(start_pfn, end_pfn - start_pfn);
+ free_bootmem(__pa(low_physmem) + bootmap_size, high_physmem - low_physmem);
+
+
+
+
+
+ Two stack pages have already been allocated, and low_physmem points to
+ the third page, which is the beginning of free memory.
+ The init_bootmem call declares the entire memory to the boot memory
+ manager, which marks it all reserved. The free_bootmem call frees up
+ all of it, except for the first two pages. This looks correct to me.
+
+
+ So, I decide to see init_bootmem run and make sure that it is marking
+ those first two pages as reserved. I never get that far.
+
+
+ Stepping into init_bootmem, and looking at bootmem_map before looking
+ at what it contains shows the following:
+
+
+
+ (gdb) p bootmem_map
+ $3 = (void *) 0x50000000
+
+
+
+
+
+ Aha! The light dawns. That first page is doing double duty as a
+ stack and as the boot memory map. The last thing that the boot memory
+ manager does is to free the pages used by its memory map, so this page
+ is getting freed even its marked as reserved.
+
+
+ The fix was to initialize the boot memory manager before allocating
+ those two stack pages, and then allocate them through the boot memory
+ manager. After doing this, and fixing a couple of subsequent buglets,
+ the stack corruption problem disappeared.
+
+
+
+
+
+ 1\b13\b3.\b. W\bWh\bha\bat\bt t\bto\bo d\bdo\bo w\bwh\bhe\ben\bn U\bUM\bML\bL d\bdo\boe\bes\bsn\bn'\b't\bt w\bwo\bor\brk\bk
+
+
+
+
+ 1\b13\b3.\b.1\b1.\b. S\bSt\btr\bra\ban\bng\bge\be c\bco\bom\bmp\bpi\bil\bla\bat\bti\bio\bon\bn e\ber\brr\bro\bor\brs\bs w\bwh\bhe\ben\bn y\byo\bou\bu b\bbu\bui\bil\bld\bd f\bfr\bro\bom\bm s\bso\bou\bur\brc\bce\be
+
+ As of test11, it is necessary to have "ARCH=um" in the environment or
+ on the make command line for all steps in building UML, including
+ clean, distclean, or mrproper, config, menuconfig, or xconfig, dep,
+ and linux. If you forget for any of them, the i386 build seems to
+ contaminate the UML build. If this happens, start from scratch with
+
+
+ host%
+ make mrproper ARCH=um
+
+
+
+
+ and repeat the build process with ARCH=um on all the steps.
+
+
+ See ``Compiling the kernel and modules'' for more details.
+
+
+ Another cause of strange compilation errors is building UML in
+ /usr/src/linux. If you do this, the first thing you need to do is
+ clean up the mess you made. The /usr/src/linux/asm link will now
+ point to /usr/src/linux/asm-um. Make it point back to
+ /usr/src/linux/asm-i386. Then, move your UML pool someplace else and
+ build it there. Also see below, where a more specific set of symptoms
+ is described.
+
+
+
+ 1\b13\b3.\b.3\b3.\b. A\bA v\bva\bar\bri\bie\bet\bty\by o\bof\bf p\bpa\ban\bni\bic\bcs\bs a\ban\bnd\bd h\bha\ban\bng\bgs\bs w\bwi\bit\bth\bh /\b/t\btm\bmp\bp o\bon\bn a\ba r\bre\bei\bis\bse\ber\brf\bfs\bs f\bfi\bil\ble\bes\bsy\bys\bs-\b-
+ t\bte\bem\bm
+
+ I saw this on reiserfs 3.5.21 and it seems to be fixed in 3.5.27.
+ Panics preceded by
+
+
+ Detaching pid nnnn
+
+
+
+ are diagnostic of this problem. This is a reiserfs bug which causes a
+ thread to occasionally read stale data from a mmapped page shared with
+ another thread. The fix is to upgrade the filesystem or to have /tmp
+ be an ext2 filesystem.
+
+
+
+ 1\b13\b3.\b.4\b4.\b. T\bTh\bhe\be c\bco\bom\bmp\bpi\bil\ble\be f\bfa\bai\bil\bls\bs w\bwi\bit\bth\bh e\ber\brr\bro\bor\brs\bs a\bab\bbo\bou\but\bt c\bco\bon\bnf\bfl\bli\bic\bct\bti\bin\bng\bg t\bty\byp\bpe\bes\bs f\bfo\bor\br
+ '\b'o\bop\bpe\ben\bn'\b',\b, '\b'd\bdu\bup\bp'\b',\b, a\ban\bnd\bd '\b'w\bwa\bai\bit\btp\bpi\bid\bd'\b'
+
+ This happens when you build in /usr/src/linux. The UML build makes
+ the include/asm link point to include/asm-um. /usr/include/asm points
+ to /usr/src/linux/include/asm, so when that link gets moved, files
+ which need to include the asm-i386 versions of headers get the
+ incompatible asm-um versions. The fix is to move the include/asm link
+ back to include/asm-i386 and to do UML builds someplace else.
+
+
+
+ 1\b13\b3.\b.5\b5.\b. U\bUM\bML\bL d\bdo\boe\bes\bsn\bn'\b't\bt w\bwo\bor\brk\bk w\bwh\bhe\ben\bn /\b/t\btm\bmp\bp i\bis\bs a\ban\bn N\bNF\bFS\bS f\bfi\bil\ble\bes\bsy\bys\bst\bte\bem\bm
+
+ This seems to be a similar situation with the ReiserFS problem above.
+ Some versions of NFS seems not to handle mmap correctly, which UML
+ depends on. The workaround is have /tmp be a non-NFS directory.
+
+
+ 1\b13\b3.\b.6\b6.\b. U\bUM\bML\bL h\bha\ban\bng\bgs\bs o\bon\bn b\bbo\boo\bot\bt w\bwh\bhe\ben\bn c\bco\bom\bmp\bpi\bil\ble\bed\bd w\bwi\bit\bth\bh g\bgp\bpr\bro\bof\bf s\bsu\bup\bpp\bpo\bor\brt\bt
+
+ If you build UML with gprof support and, early in the boot, it does
+ this
+
+
+ kernel BUG at page_alloc.c:100!
+
+
+
+
+ you have a buggy gcc. You can work around the problem by removing
+ UM_FASTCALL from CFLAGS in arch/um/Makefile-i386. This will open up
+ another bug, but that one is fairly hard to reproduce.
+
+
+
+ 1\b13\b3.\b.7\b7.\b. s\bsy\bys\bsl\blo\bog\bgd\bd d\bdi\bie\bes\bs w\bwi\bit\bth\bh a\ba S\bSI\bIG\bGT\bTE\bER\bRM\bM o\bon\bn s\bst\bta\bar\brt\btu\bup\bp
+
+ The exact boot error depends on the distribution that you're booting,
+ but Debian produces this:
+
+
+ /etc/rc2.d/S10sysklogd: line 49: 93 Terminated
+ start-stop-daemon --start --quiet --exec /sbin/syslogd -- $SYSLOGD
+
+
+
+
+ This is a syslogd bug. There's a race between a parent process
+ installing a signal handler and its child sending the signal. See
+ this uml-devel post <http://www.geocrawler.com/lists/3/Source-
+ Forge/709/0/6612801> for the details.
+
+
+
+ 1\b13\b3.\b.8\b8.\b. T\bTU\bUN\bN/\b/T\bTA\bAP\bP n\bne\bet\btw\bwo\bor\brk\bki\bin\bng\bg d\bdo\boe\bes\bsn\bn'\b't\bt w\bwo\bor\brk\bk o\bon\bn a\ba 2\b2.\b.4\b4 h\bho\bos\bst\bt
+
+ There are a couple of problems which were
+ <http://www.geocrawler.com/lists/3/SourceForge/597/0/> name="pointed
+ out"> by Tim Robinson <timro at trkr dot net>
+
+ +\bo It doesn't work on hosts running 2.4.7 (or thereabouts) or earlier.
+ The fix is to upgrade to something more recent and then read the
+ next item.
+
+ +\bo If you see
+
+
+ File descriptor in bad state
+
+
+
+ when you bring up the device inside UML, you have a header mismatch
+ between the original kernel and the upgraded one. Make /usr/src/linux
+ point at the new headers. This will only be a problem if you build
+ uml_net yourself.
+
+
+
+ 1\b13\b3.\b.9\b9.\b. Y\bYo\bou\bu c\bca\ban\bn n\bne\bet\btw\bwo\bor\brk\bk t\bto\bo t\bth\bhe\be h\bho\bos\bst\bt b\bbu\but\bt n\bno\bot\bt t\bto\bo o\bot\bth\bhe\ber\br m\bma\bac\bch\bhi\bin\bne\bes\bs o\bon\bn t\bth\bhe\be
+ n\bne\bet\bt
+
+ If you can connect to the host, and the host can connect to UML, but
+ you cannot connect to any other machines, then you may need to enable
+ IP Masquerading on the host. Usually this is only experienced when
+ using private IP addresses (192.168.x.x or 10.x.x.x) for host/UML
+ networking, rather than the public address space that your host is
+ connected to. UML does not enable IP Masquerading, so you will need
+ to create a static rule to enable it:
+
+
+ host%
+ iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
+
+
+
+
+ Replace eth0 with the interface that you use to talk to the rest of
+ the world.
+
+
+ Documentation on IP Masquerading, and SNAT, can be found at
+ www.netfilter.org <http://www.netfilter.org> .
+
+
+ If you can reach the local net, but not the outside Internet, then
+ that is usually a routing problem. The UML needs a default route:
+
+
+ UML#
+ route add default gw gateway IP
+
+
+
+
+ The gateway IP can be any machine on the local net that knows how to
+ reach the outside world. Usually, this is the host or the local net-
+ work's gateway.
+
+
+ Occasionally, we hear from someone who can reach some machines, but
+ not others on the same net, or who can reach some ports on other
+ machines, but not others. These are usually caused by strange
+ firewalling somewhere between the UML and the other box. You track
+ this down by running tcpdump on every interface the packets travel
+ over and see where they disappear. When you find a machine that takes
+ the packets in, but does not send them onward, that's the culprit.
+
+
+
+ 1\b13\b3.\b.1\b10\b0.\b. I\bI h\bha\bav\bve\be n\bno\bo r\bro\boo\bot\bt a\ban\bnd\bd I\bI w\bwa\ban\bnt\bt t\bto\bo s\bsc\bcr\bre\bea\bam\bm
+
+ Thanks to Birgit Wahlich for telling me about this strange one. It
+ turns out that there's a limit of six environment variables on the
+ kernel command line. When that limit is reached or exceeded, argument
+ processing stops, which means that the 'root=' argument that UML
+ usually adds is not seen. So, the filesystem has no idea what the
+ root device is, so it panics.
+
+
+ The fix is to put less stuff on the command line. Glomming all your
+ setup variables into one is probably the best way to go.
+
+
+
+ 1\b13\b3.\b.1\b11\b1.\b. U\bUM\bML\bL b\bbu\bui\bil\bld\bd c\bco\bon\bnf\bfl\bli\bic\bct\bt b\bbe\bet\btw\bwe\bee\ben\bn p\bpt\btr\bra\bac\bce\be.\b.h\bh a\ban\bnd\bd u\buc\bco\bon\bnt\bte\bex\bxt\bt.\b.h\bh
+
+ On some older systems, /usr/include/asm/ptrace.h and
+ /usr/include/sys/ucontext.h define the same names. So, when they're
+ included together, the defines from one completely mess up the parsing
+ of the other, producing errors like:
+ /usr/include/sys/ucontext.h:47: parse error before
+ `10'
+
+
+
+
+ plus a pile of warnings.
+
+
+ This is a libc botch, which has since been fixed, and I don't see any
+ way around it besides upgrading.
+
+
+
+ 1\b13\b3.\b.1\b12\b2.\b. T\bTh\bhe\be U\bUM\bML\bL B\bBo\bog\bgo\boM\bMi\bip\bps\bs i\bis\bs e\bex\bxa\bac\bct\btl\bly\by h\bha\bal\blf\bf t\bth\bhe\be h\bho\bos\bst\bt'\b's\bs B\bBo\bog\bgo\boM\bMi\bip\bps\bs
+
+ On i386 kernels, there are two ways of running the loop that is used
+ to calculate the BogoMips rating, using the TSC if it's there or using
+ a one-instruction loop. The TSC produces twice the BogoMips as the
+ loop. UML uses the loop, since it has nothing resembling a TSC, and
+ will get almost exactly the same BogoMips as a host using the loop.
+ However, on a host with a TSC, its BogoMips will be double the loop
+ BogoMips, and therefore double the UML BogoMips.
+
+
+
+ 1\b13\b3.\b.1\b13\b3.\b. W\bWh\bhe\ben\bn y\byo\bou\bu r\bru\bun\bn U\bUM\bML\bL,\b, i\bit\bt i\bim\bmm\bme\bed\bdi\bia\bat\bte\bel\bly\by s\bse\beg\bgf\bfa\bau\bul\blt\bts\bs
+
+ If the host is configured with the 2G/2G address space split, that's
+ why. See ``UML on 2G/2G hosts'' for the details on getting UML to
+ run on your host.
+
+
+
+ 1\b13\b3.\b.1\b14\b4.\b. x\bxt\bte\ber\brm\bms\bs a\bap\bpp\bpe\bea\bar\br,\b, t\bth\bhe\ben\bn i\bim\bmm\bme\bed\bdi\bia\bat\bte\bel\bly\by d\bdi\bis\bsa\bap\bpp\bpe\bea\bar\br
+
+ If you're running an up to date kernel with an old release of
+ uml_utilities, the port-helper program will not work properly, so
+ xterms will exit straight after they appear. The solution is to
+ upgrade to the latest release of uml_utilities. Usually this problem
+ occurs when you have installed a packaged release of UML then compiled
+ your own development kernel without upgrading the uml_utilities from
+ the source distribution.
+
+
+
+ 1\b13\b3.\b.1\b15\b5.\b. A\bAn\bny\by o\bot\bth\bhe\ber\br p\bpa\ban\bni\bic\bc,\b, h\bha\ban\bng\bg,\b, o\bor\br s\bst\btr\bra\ban\bng\bge\be b\bbe\beh\bha\bav\bvi\bio\bor\br
+
+ If you're seeing truly strange behavior, such as hangs or panics that
+ happen in random places, or you try running the debugger to see what's
+ happening and it acts strangely, then it could be a problem in the
+ host kernel. If you're not running a stock Linus or -ac kernel, then
+ try that. An early version of the preemption patch and a 2.4.10 SuSE
+ kernel have caused very strange problems in UML.
+
+
+ Otherwise, let me know about it. Send a message to one of the UML
+ mailing lists - either the developer list - user-mode-linux-devel at
+ lists dot sourceforge dot net (subscription info) or the user list -
+ user-mode-linux-user at lists dot sourceforge do net (subscription
+ info), whichever you prefer. Don't assume that everyone knows about
+ it and that a fix is imminent.
+
+
+ If you want to be super-helpful, read ``Diagnosing Problems'' and
+ follow the instructions contained therein.
+ 1\b14\b4.\b. D\bDi\bia\bag\bgn\bno\bos\bsi\bin\bng\bg P\bPr\bro\bob\bbl\ble\bem\bms\bs
+
+
+ If you get UML to crash, hang, or otherwise misbehave, you should
+ report this on one of the project mailing lists, either the developer
+ list - user-mode-linux-devel at lists dot sourceforge dot net
+ (subscription info) or the user list - user-mode-linux-user at lists
+ dot sourceforge dot net (subscription info). When you do, it is
+ likely that I will want more information. So, it would be helpful to
+ read the stuff below, do whatever is applicable in your case, and
+ report the results to the list.
+
+
+ For any diagnosis, you're going to need to build a debugging kernel.
+ The binaries from this site aren't debuggable. If you haven't done
+ this before, read about ``Compiling the kernel and modules'' and
+ ``Kernel debugging'' UML first.
+
+
+ 1\b14\b4.\b.1\b1.\b. C\bCa\bas\bse\be 1\b1 :\b: N\bNo\bor\brm\bma\bal\bl k\bke\ber\brn\bne\bel\bl p\bpa\ban\bni\bic\bcs\bs
+
+ The most common case is for a normal thread to panic. To debug this,
+ you will need to run it under the debugger (add 'debug' to the command
+ line). An xterm will start up with gdb running inside it. Continue
+ it when it stops in start_kernel and make it crash. Now ^C gdb and
+
+
+ If the panic was a "Kernel mode fault", then there will be a segv
+ frame on the stack and I'm going to want some more information. The
+ stack might look something like this:
+
+
+ (UML gdb) backtrace
+ #0 0x1009bf76 in __sigprocmask (how=1, set=0x5f347940, oset=0x0)
+ at ../sysdeps/unix/sysv/linux/sigprocmask.c:49
+ #1 0x10091411 in change_sig (signal=10, on=1) at process.c:218
+ #2 0x10094785 in timer_handler (sig=26) at time_kern.c:32
+ #3 0x1009bf38 in __restore ()
+ at ../sysdeps/unix/sysv/linux/i386/sigaction.c:125
+ #4 0x1009534c in segv (address=8, ip=268849158, is_write=2, is_user=0)
+ at trap_kern.c:66
+ #5 0x10095c04 in segv_handler (sig=11) at trap_user.c:285
+ #6 0x1009bf38 in __restore ()
+
+
+
+
+ I'm going to want to see the symbol and line information for the value
+ of ip in the segv frame. In this case, you would do the following:
+
+
+ (UML gdb) i sym 268849158
+
+
+
+
+ and
+
+
+ (UML gdb) i line *268849158
+
+
+
+
+ The reason for this is the __restore frame right above the segv_han-
+ dler frame is hiding the frame that actually segfaulted. So, I have
+ to get that information from the faulting ip.
+
+
+ 1\b14\b4.\b.2\b2.\b. C\bCa\bas\bse\be 2\b2 :\b: T\bTr\bra\bac\bci\bin\bng\bg t\bth\bhr\bre\bea\bad\bd p\bpa\ban\bni\bic\bcs\bs
+
+ The less common and more painful case is when the tracing thread
+ panics. In this case, the kernel debugger will be useless because it
+ needs a healthy tracing thread in order to work. The first thing to
+ do is get a backtrace from the tracing thread. This is done by
+ figuring out what its pid is, firing up gdb, and attaching it to that
+ pid. You can figure out the tracing thread pid by looking at the
+ first line of the console output, which will look like this:
+
+
+ tracing thread pid = 15851
+
+
+
+
+ or by running ps on the host and finding the line that looks like
+ this:
+
+
+ jdike 15851 4.5 0.4 132568 1104 pts/0 S 21:34 0:05 ./linux [(tracing thread)]
+
+
+
+
+ If the panic was 'segfault in signals', then follow the instructions
+ above for collecting information about the location of the seg fault.
+
+
+ If the tracing thread flaked out all by itself, then send that
+ backtrace in and wait for our crack debugging team to fix the problem.
+
+
+ 1\b14\b4.\b.3\b3.\b. C\bCa\bas\bse\be 3\b3 :\b: T\bTr\bra\bac\bci\bin\bng\bg t\bth\bhr\bre\bea\bad\bd p\bpa\ban\bni\bic\bcs\bs c\bca\bau\bus\bse\bed\bd b\bby\by o\bot\bth\bhe\ber\br t\bth\bhr\bre\bea\bad\bds\bs
+
+ However, there are cases where the misbehavior of another thread
+ caused the problem. The most common panic of this type is:
+
+
+ wait_for_stop failed to wait for <pid> to stop with <signal number>
+
+
+
+
+ In this case, you'll need to get a backtrace from the process men-
+ tioned in the panic, which is complicated by the fact that the kernel
+ debugger is defunct and without some fancy footwork, another gdb can't
+ attach to it. So, this is how the fancy footwork goes:
+
+ In a shell:
+
+
+ host% kill -STOP pid
+
+
+
+
+ Run gdb on the tracing thread as described in case 2 and do:
+
+
+ (host gdb) call detach(pid)
+
+
+ If you get a segfault, do it again. It always works the second time.
+
+ Detach from the tracing thread and attach to that other thread:
+
+
+ (host gdb) detach
+
+
+
+
+
+
+ (host gdb) attach pid
+
+
+
+
+ If gdb hangs when attaching to that process, go back to a shell and
+ do:
+
+
+ host%
+ kill -CONT pid
+
+
+
+
+ And then get the backtrace:
+
+
+ (host gdb) backtrace
+
+
+
+
+
+ 1\b14\b4.\b.4\b4.\b. C\bCa\bas\bse\be 4\b4 :\b: H\bHa\ban\bng\bgs\bs
+
+ Hangs seem to be fairly rare, but they sometimes happen. When a hang
+ happens, we need a backtrace from the offending process. Run the
+ kernel debugger as described in case 1 and get a backtrace. If the
+ current process is not the idle thread, then send in the backtrace.
+ You can tell that it's the idle thread if the stack looks like this:
+
+
+ #0 0x100b1401 in __libc_nanosleep ()
+ #1 0x100a2885 in idle_sleep (secs=10) at time.c:122
+ #2 0x100a546f in do_idle () at process_kern.c:445
+ #3 0x100a5508 in cpu_idle () at process_kern.c:471
+ #4 0x100ec18f in start_kernel () at init/main.c:592
+ #5 0x100a3e10 in start_kernel_proc (unused=0x0) at um_arch.c:71
+ #6 0x100a383f in signal_tramp (arg=0x100a3dd8) at trap_user.c:50
+
+
+
+
+ If this is the case, then some other process is at fault, and went to
+ sleep when it shouldn't have. Run ps on the host and figure out which
+ process should not have gone to sleep and stayed asleep. Then attach
+ to it with gdb and get a backtrace as described in case 3.
+
+
+
+
+
+
+ 1\b15\b5.\b. T\bTh\bha\ban\bnk\bks\bs
+
+
+ A number of people have helped this project in various ways, and this
+ page gives recognition where recognition is due.
+
+
+ If you're listed here and you would prefer a real link on your name,
+ or no link at all, instead of the despammed email address pseudo-link,
+ let me know.
+
+
+ If you're not listed here and you think maybe you should be, please
+ let me know that as well. I try to get everyone, but sometimes my
+ bookkeeping lapses and I forget about contributions.
+
+
+ 1\b15\b5.\b.1\b1.\b. C\bCo\bod\bde\be a\ban\bnd\bd D\bDo\boc\bcu\bum\bme\ben\bnt\bta\bat\bti\bio\bon\bn
+
+ Rusty Russell <rusty at linuxcare.com.au> -
+
+ +\bo wrote the HOWTO <http://user-mode-
+ linux.sourceforge.net/UserModeLinux-HOWTO.html>
+
+ +\bo prodded me into making this project official and putting it on
+ SourceForge
+
+ +\bo came up with the way cool UML logo <http://user-mode-
+ linux.sourceforge.net/uml-small.png>
+
+ +\bo redid the config process
+
+
+ Peter Moulder <reiter at netspace.net.au> - Fixed my config and build
+ processes, and added some useful code to the block driver
+
+
+ Bill Stearns <wstearns at pobox.com> -
+
+ +\bo HOWTO updates
+
+ +\bo lots of bug reports
+
+ +\bo lots of testing
+
+ +\bo dedicated a box (uml.ists.dartmouth.edu) to support UML development
+
+ +\bo wrote the mkrootfs script, which allows bootable filesystems of
+ RPM-based distributions to be cranked out
+
+ +\bo cranked out a large number of filesystems with said script
+
+
+ Jim Leu <jleu at mindspring.com> - Wrote the virtual ethernet driver
+ and associated usermode tools
+
+ Lars Brinkhoff <http://lars.nocrew.org/> - Contributed the ptrace
+ proxy from his own project <http://a386.nocrew.org/> to allow easier
+ kernel debugging
+
+
+ Andrea Arcangeli <andrea at suse.de> - Redid some of the early boot
+ code so that it would work on machines with Large File Support
+
+
+ Chris Emerson <http://www.chiark.greenend.org.uk/~cemerson/> - Did
+ the first UML port to Linux/ppc
+
+
+ Harald Welte <laforge at gnumonks.org> - Wrote the multicast
+ transport for the network driver
+
+
+ Jorgen Cederlof - Added special file support to hostfs
+
+
+ Greg Lonnon <glonnon at ridgerun dot com> - Changed the ubd driver
+ to allow it to layer a COW file on a shared read-only filesystem and
+ wrote the iomem emulation support
+
+
+ Henrik Nordstrom <http://hem.passagen.se/hno/> - Provided a variety
+ of patches, fixes, and clues
+
+
+ Lennert Buytenhek - Contributed various patches, a rewrite of the
+ network driver, the first implementation of the mconsole driver, and
+ did the bulk of the work needed to get SMP working again.
+
+
+ Yon Uriarte - Fixed the TUN/TAP network backend while I slept.
+
+
+ Adam Heath - Made a bunch of nice cleanups to the initialization code,
+ plus various other small patches.
+
+
+ Matt Zimmerman - Matt volunteered to be the UML Debian maintainer and
+ is doing a real nice job of it. He also noticed and fixed a number of
+ actually and potentially exploitable security holes in uml_net. Plus
+ the occasional patch. I like patches.
+
+
+ James McMechan - James seems to have taken over maintenance of the ubd
+ driver and is doing a nice job of it.
+
+
+ Chandan Kudige - wrote the umlgdb script which automates the reloading
+ of module symbols.
+
+
+ Steve Schmidtke - wrote the UML slirp transport and hostaudio drivers,
+ enabling UML processes to access audio devices on the host. He also
+ submitted patches for the slip transport and lots of other things.
+
+
+ David Coulson <http://davidcoulson.net> -
+
+ +\bo Set up the usermodelinux.org <http://usermodelinux.org> site,
+ which is a great way of keeping the UML user community on top of
+ UML goings-on.
+
+ +\bo Site documentation and updates
+
+ +\bo Nifty little UML management daemon UMLd
+ <http://uml.openconsultancy.com/umld/>
+
+ +\bo Lots of testing and bug reports
+
+
+
+
+ 1\b15\b5.\b.2\b2.\b. F\bFl\blu\bus\bsh\bhi\bin\bng\bg o\bou\but\bt b\bbu\bug\bgs\bs
+
+
+
+ +\bo Yuri Pudgorodsky
+
+ +\bo Gerald Britton
+
+ +\bo Ian Wehrman
+
+ +\bo Gord Lamb
+
+ +\bo Eugene Koontz
+
+ +\bo John H. Hartman
+
+ +\bo Anders Karlsson
+
+ +\bo Daniel Phillips
+
+ +\bo John Fremlin
+
+ +\bo Rainer Burgstaller
+
+ +\bo James Stevenson
+
+ +\bo Matt Clay
+
+ +\bo Cliff Jefferies
+
+ +\bo Geoff Hoff
+
+ +\bo Lennert Buytenhek
+
+ +\bo Al Viro
+
+ +\bo Frank Klingenhoefer
+
+ +\bo Livio Baldini Soares
+
+ +\bo Jon Burgess
+
+ +\bo Petru Paler
+
+ +\bo Paul
+
+ +\bo Chris Reahard
+
+ +\bo Sverker Nilsson
+
+ +\bo Gong Su
+
+ +\bo johan verrept
+
+ +\bo Bjorn Eriksson
+
+ +\bo Lorenzo Allegrucci
+
+ +\bo Muli Ben-Yehuda
+
+ +\bo David Mansfield
+
+ +\bo Howard Goff
+
+ +\bo Mike Anderson
+
+ +\bo John Byrne
+
+ +\bo Sapan J. Batia
+
+ +\bo Iris Huang
+
+ +\bo Jan Hudec
+
+ +\bo Voluspa
+
+
+
+
+ 1\b15\b5.\b.3\b3.\b. B\bBu\bug\bgl\ble\bet\bts\bs a\ban\bnd\bd c\bcl\ble\bea\ban\bn-\b-u\bup\bps\bs
+
+
+
+ +\bo Dave Zarzycki
+
+ +\bo Adam Lazur
+
+ +\bo Boria Feigin
+
+ +\bo Brian J. Murrell
+
+ +\bo JS
+
+ +\bo Roman Zippel
+
+ +\bo Wil Cooley
+
+ +\bo Ayelet Shemesh
+
+ +\bo Will Dyson
+
+ +\bo Sverker Nilsson
+
+ +\bo dvorak
+
+ +\bo v.naga srinivas
+
+ +\bo Shlomi Fish
+
+ +\bo Roger Binns
+
+ +\bo johan verrept
+
+ +\bo MrChuoi
+
+ +\bo Peter Cleve
+
+ +\bo Vincent Guffens
+
+ +\bo Nathan Scott
+
+ +\bo Patrick Caulfield
+
+ +\bo jbearce
+
+ +\bo Catalin Marinas
+
+ +\bo Shane Spencer
+
+ +\bo Zou Min
+
+
+ +\bo Ryan Boder
+
+ +\bo Lorenzo Colitti
+
+ +\bo Gwendal Grignou
+
+ +\bo Andre' Breiler
+
+ +\bo Tsutomu Yasuda
+
+
+
+ 1\b15\b5.\b.4\b4.\b. C\bCa\bas\bse\be S\bSt\btu\bud\bdi\bie\bes\bs
+
+
+ +\bo Jon Wright
+
+ +\bo William McEwan
+
+ +\bo Michael Richardson
+
+
+
+ 1\b15\b5.\b.5\b5.\b. O\bOt\bth\bhe\ber\br c\bco\bon\bnt\btr\bri\bib\bbu\but\bti\bio\bon\bns\bs
+
+
+ Bill Carr <Bill.Carr at compaq.com> made the Red Hat mkrootfs script
+ work with RH 6.2.
+
+ Michael Jennings <mikejen at hevanet.com> sent in some material which
+ is now gracing the top of the index page <http://user-mode-
+ linux.sourceforge.net/> of this site.
+
+ SGI <http://www.sgi.com> (and more specifically Ralf Baechle <ralf at
+ uni-koblenz.de> ) gave me an account on oss.sgi.com
+ <http://www.oss.sgi.com> . The bandwidth there made it possible to
+ produce most of the filesystems available on the project download
+ page.
+
+ Laurent Bonnaud <Laurent.Bonnaud at inpg.fr> took the old grotty
+ Debian filesystem that I've been distributing and updated it to 2.2.
+ It is now available by itself here.
+
+ Rik van Riel gave me some ftp space on ftp.nl.linux.org so I can make
+ releases even when Sourceforge is broken.
+
+ Rodrigo de Castro looked at my broken pte code and told me what was
+ wrong with it, letting me fix a long-standing (several weeks) and
+ serious set of bugs.
+
+ Chris Reahard built a specialized root filesystem for running a DNS
+ server jailed inside UML. It's available from the download
+ <http://user-mode-linux.sourceforge.net/dl-sf.html> page in the Jail
+ Filesystems section.
+
+
+
+
+
+
+
+
+
+
+
+
projects / openwrt / staging / blogic.git / commitdiff