uboot-mediatek: adapt BPi-R3 and BPi-R64 to new device tree overlay

Update bootloader environment for BPi-R3 and BPi-R64 to adapt to new
device tree overlay mechanism now that support for multiple device
tree overlays has been added.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

diff --git a/package/boot/uboot-mediatek/patches/404-add-bananapi_bpi-r64_defconfigs.patch b/package/boot/uboot-mediatek/patches/404-add-bananapi_bpi-r64_defconfigs.patch
index 135eb90e2b9e48581c373ef0c7538856d4856438..f3d9499e171db03e287a2836bea5aa555a5fab64 100644 (file)
--- a/package/boot/uboot-mediatek/patches/404-add-bananapi_bpi-r64_defconfigs.patch
+++ b/package/boot/uboot-mediatek/patches/404-add-bananapi_bpi-r64_defconfigs.patch
@@ -173,9 +173,9 @@
 +loadaddr=0x48000000
 +bootargs=root=/dev/mmcblk1p65
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_sdmmc ; fi
-+bootconf=config-mt7622-bananapi-bpi-r64-pcie1
-+bootconf_pcie=config-mt7622-bananapi-bpi-r64-pcie1
-+bootconf_sata=config-mt7622-bananapi-bpi-r64-sata
++bootconf=config-1#mt7622-bananapi-bpi-r64-pcie1
++bootconf_pcie=config-1#mt7622-bananapi-bpi-r64-pcie1
++bootconf_sata=config-1#mt7622-bananapi-bpi-r64-sata
 +bootdelay=0
 +bootfile=openwrt-mediatek-mt7622-bananapi_bpi-r64-initramfs-recovery.itb
 +bootfile_emmcbl2=openwrt-mediatek-mt7622-bananapi_bpi-r64-emmc-preloader.bin
@@ -412,9 +412,9 @@
 +loadaddr=0x48000000
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_emmc ; fi
 +bootargs=root=/dev/mmcblk0p65
-+bootconf=config-mt7622-bananapi-bpi-r64-pcie1
-+bootconf_pcie=config-mt7622-bananapi-bpi-r64-pcie1
-+bootconf_sata=config-mt7622-bananapi-bpi-r64-sata
++bootconf=config-1#mt7622-bananapi-bpi-r64-pcie1
++bootconf_pcie=config-1#mt7622-bananapi-bpi-r64-pcie1
++bootconf_sata=config-1#mt7622-bananapi-bpi-r64-sata
 +bootdelay=0
 +bootfile=openwrt-mediatek-mt7622-bananapi_bpi-r64-initramfs-recovery.itb
 +bootfile_upg=openwrt-mediatek-mt7622-bananapi_bpi-r64-squashfs-sysupgrade.itb
@@ -619,9 +619,9 @@
 +loadaddr=0x48000000
 +bootargs=root=/dev/ubiblock0_2p1
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
-+bootconf=config-mt7622-bananapi-bpi-r64-pcie1
-+bootconf_pcie=config-mt7622-bananapi-bpi-r64-pcie1
-+bootconf_sata=config-mt7622-bananapi-bpi-r64-sata
++bootconf=config-1#mt7622-bananapi-bpi-r64-pcie1
++bootconf_pcie=config-1#mt7622-bananapi-bpi-r64-pcie1
++bootconf_sata=config-1#mt7622-bananapi-bpi-r64-sata
 +bootdelay=0
 +bootfile=openwrt-mediatek-mt7622-bananapi_bpi-r64-initramfs-recovery.itb
 +bootfile_fip=openwrt-mediatek-mt7622-bananapi_bpi-r64-snand-bl31-uboot.fip

diff --git a/package/boot/uboot-mediatek/patches/430-add-bpi-r3.patch b/package/boot/uboot-mediatek/patches/430-add-bpi-r3.patch
index 880b1b4d3225f65cd01fdd16cf6c491a06f2c862..bcd29b974e52e975ab456a0af4c12788f8bc5f41 100644 (file)
--- a/package/boot/uboot-mediatek/patches/430-add-bpi-r3.patch
+++ b/package/boot/uboot-mediatek/patches/430-add-bpi-r3.patch
@@ -1118,7 +1118,7 @@
 +
 --- /dev/null
 +++ b/bananapi_bpi-r3_sdmmc_env
-@@ -0,0 +1,75 @@
+@@ -0,0 +1,80 @@
 +ipaddr=192.168.1.1
 +serverip=192.168.1.254
 +loadaddr=0x46000000
@@ -1126,6 +1126,11 @@
 +bootargs=root=/dev/mmcblk0p65
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_sdmmc ; fi
 +bootconf=config-mt7986a-bananapi-bpi-r3
++bootconf_base=config-mt7986a-bananapi-bpi-r3
++bootconf_nor=mt7986a-bananapi-bpi-r3-nor
++bootconf_nand=mt7986a-bananapi-bpi-r3-nand
++bootconf_sd=mt7986a-bananapi-bpi-r3-sd
++bootconf_emmc=mt7986a-bananapi-bpi-r3-emmc
 +bootdelay=0
 +bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-initramfs-recovery.itb
 +bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r3-squashfs-sysupgrade.itb
@@ -1146,7 +1151,7 @@
 +bootmenu_7=\e[31mInstall bootloader, recovery and production to NAND.\e[0m=if nand info ; then run ubi_init ; else echo "NAND not detected" ; fi ; run bootmenu_confirm_return
 +bootmenu_8=Reboot.=reset
 +bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
-+boot_update_conf=if nand info ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-snand ; else if sf probe ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-nor ; else setenv bootconf config-mt7986a-bananapi-bpi-r3 ; fi ; fi
++boot_update_conf=if nand info ; then setenv bootconf $bootconf_base#$bootconf_sd#$bootconf_nand ; else if sf probe ; then setenv bootconf $bootconf_base#$bootconf_sd#$bootconf_nor ; else setenv bootconf $bootconf_base#$bootconf_sd ; fi ; fi
 +boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
 +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
 +boot_production=led $bootled_pwr on ; run boot_update_conf ; run sdmmc_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
@@ -1196,14 +1201,19 @@
 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       \e[33m$ver\e[0m"
 --- /dev/null
 +++ b/bananapi_bpi-r3_nor_env
-@@ -0,0 +1,55 @@
+@@ -0,0 +1,60 @@
 +ipaddr=192.168.1.1
 +serverip=192.168.1.254
 +loadaddr=0x46000000
 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
 +bootargs=root=/dev/mtdblock0p1
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_nor ; fi
-+bootconf=config-mt7986a-bananapi-bpi-r3-emmc-nor
++bootconf=config-mt7986a-bananapi-bpi-r3
++bootconf_base=config-mt7986a-bananapi-bpi-r3
++bootconf_nor=mt7986a-bananapi-bpi-r3-nor
++bootconf_nand=mt7986a-bananapi-bpi-r3-nand
++bootconf_sd=mt7986a-bananapi-bpi-r3-sd
++bootconf_emmc=mt7986a-bananapi-bpi-r3-emmc
 +bootdelay=0
 +bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-initramfs-recovery.itb
 +bootfile_bl2=openwrt-mediatek-filogic-bananapi_bpi-r3-nor-preloader.bin
@@ -1238,7 +1248,7 @@
 +boot_tftp=run boot_update_conf ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
 +boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run boot_write_fip
 +boot_tftp_write_preloader=tftpboot $loadaddr $bootfile_bl2 && run boot_write_preloader
-+boot_update_conf=if mmc partconf 0 ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-emmc-nor ; else setenv bootconf config-mt7986a-bananapi-bpi-r3-nor ; fi
++boot_update_conf=if mmc partconf 0 ; then setenv bootconf $bootconf_base#$bootconf_nor#$bootconf_emmc ; else setenv bootconf $bootconf_base#$bootconf_nor#$bootconf_sd ; fi
 +boot_nor=run boot_production ; run boot_recovery
 +boot_write_fip=mtd erase fip && mtd write fip $loadaddr
 +boot_write_preloader=mtd erase bl2 && mtd write bl2 $loadaddr
@@ -1254,13 +1264,18 @@
 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       \e[33m$ver\e[0m"
 --- /dev/null
 +++ b/bananapi_bpi-r3_snand_env
-@@ -0,0 +1,69 @@
+@@ -0,0 +1,74 @@
 +ipaddr=192.168.1.1
 +serverip=192.168.1.254
 +loadaddr=0x46000000
 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
 +bootargs=root=/dev/ubiblock0_2p1
-+bootconf=config-mt7986a-bananapi-bpi-r3-snand
++bootconf=config-mt7986a-bananapi-bpi-r3
++bootconf_base=config-mt7986a-bananapi-bpi-r3
++bootconf_nor=mt7986a-bananapi-bpi-r3-nor
++bootconf_nand=mt7986a-bananapi-bpi-r3-nand
++bootconf_sd=mt7986a-bananapi-bpi-r3-sd
++bootconf_emmc=mt7986a-bananapi-bpi-r3-emmc
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
 +bootdelay=0
 +bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-initramfs-recovery.itb
@@ -1296,7 +1311,7 @@
 +boot_tftp=run boot_update_conf ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
 +boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
 +boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
-+boot_update_conf=if mmc partconf 0 ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-emmc-snand ; else setenv bootconf config-mt7986a-bananapi-bpi-r3-snand ; fi
++boot_update_conf=if mmc partconf 0 ; then setenv bootconf $bootconf_base#$bootconf_nand#$bootconf_emmc ; else setenv bootconf  $bootconf_base#$bootconf_nand#$bootconf_sd ; fi
 +part_default=production
 +part_recovery=recovery
 +reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
@@ -1326,14 +1341,19 @@
 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       \e[33m$ver\e[0m"
 --- /dev/null
 +++ b/bananapi_bpi-r3_emmc_env
-@@ -0,0 +1,56 @@
+@@ -0,0 +1,61 @@
 +ipaddr=192.168.1.1
 +serverip=192.168.1.254
 +loadaddr=0x46000000
 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
 +bootargs=root=/dev/mmcblk0p65
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_emmc ; fi
-+bootconf=config-mt7986a-bananapi-bpi-r3-emmc
++bootconf=config-mt7986a-bananapi-bpi-r3
++bootconf_base=config-mt7986a-bananapi-bpi-r3
++bootconf_nor=mt7986a-bananapi-bpi-r3-nor
++bootconf_nand=mt7986a-bananapi-bpi-r3-nand
++bootconf_sd=mt7986a-bananapi-bpi-r3-sd
++bootconf_emmc=mt7986a-bananapi-bpi-r3-emmc
 +bootdelay=0
 +bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-initramfs-recovery.itb
 +bootfile_bl2=openwrt-mediatek-filogic-bananapi_bpi-r3-emmc-preloader.bin
@@ -1367,7 +1387,7 @@
 +boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run emmc_write_fip
 +boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run emmc_write_bl2
 +boot_tftp=run boot_update_conf ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
-+boot_update_conf=if nand info ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-emmc-snand ; else setenv bootconf config-mt7986a-bananapi-bpi-r3-emmc-nor ; fi
++boot_update_conf=if nand info ; then setenv bootconf $bootconf_base#$bootconf_emmc#$bootconf_nand ; else setenv bootconf $bootconf_base#$bootconf_emmc#$bootconf_nor ; fi
 +mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size
 +mmc_read_vol=mmc read $loadaddr $part_addr 0x8 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200
 +part_default=production