This driver can also be built as a module. If so, the module
will be called ad7418.
-config SENSORS_ADCXX
- tristate "National Semiconductor ADCxxxSxxx"
- depends on SPI_MASTER
- help
- If you say yes here you get support for the National Semiconductor
- ADC<bb><c>S<sss> chip family, where
- * bb is the resolution in number of bits (8, 10, 12)
- * c is the number of channels (1, 2, 4, 8)
- * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
- kSPS and 101 for 1 MSPS)
-
- Examples : ADC081S101, ADC124S501, ...
-
- This driver can also be built as a module. If so, the module
- will be called adcxx.
-
config SENSORS_ADM1021
tristate "Analog Devices ADM1021 and compatibles"
depends on I2C
This driver can also be built as a module. If so, the module
will be called fam15h_power.
+config SENSORS_APPLESMC
+ tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
+ depends on INPUT && X86
+ select NEW_LEDS
+ select LEDS_CLASS
+ select INPUT_POLLDEV
+ default n
+ help
+ This driver provides support for the Apple System Management
+ Controller, which provides an accelerometer (Apple Sudden Motion
+ Sensor), light sensors, temperature sensors, keyboard backlight
+ control and fan control.
+
+ Only Intel-based Apple's computers are supported (MacBook Pro,
+ MacBook, MacMini).
+
+ Data from the different sensors, keyboard backlight control and fan
+ control are accessible via sysfs.
+
+ This driver also provides an absolute input class device, allowing
+ the laptop to act as a pinball machine-esque joystick.
+
+ Say Y here if you have an applicable laptop and want to experience
+ the awesome power of applesmc.
+
config SENSORS_ASB100
tristate "Asus ASB100 Bach"
depends on X86 && I2C
This driver can also be built as a module. If so, the module
will be called f75375s.
+config SENSORS_MC13783_ADC
+ tristate "Freescale MC13783/MC13892 ADC"
+ depends on MFD_MC13XXX
+ help
+ Support for the A/D converter on MC13783 and MC13892 PMIC.
+
config SENSORS_FSCHMD
tristate "Fujitsu Siemens Computers sensor chips"
depends on X86 && I2C
This driver can also be built as a module. If so, the module
will be called fschmd.
-config SENSORS_G760A
- tristate "GMT G760A"
- depends on I2C
- help
- If you say yes here you get support for Global Mixed-mode
- Technology Inc G760A fan speed PWM controller chips.
-
- This driver can also be built as a module. If so, the module
- will be called g760a.
-
-config SENSORS_G762
- tristate "GMT G762 and G763"
- depends on I2C
- help
- If you say yes here you get support for Global Mixed-mode
- Technology Inc G762 and G763 fan speed PWM controller chips.
-
- This driver can also be built as a module. If so, the module
- will be called g762.
-
config SENSORS_GL518SM
tristate "Genesys Logic GL518SM"
depends on I2C
This driver can also be built as a module. If so, the module
will be called gl520sm.
+config SENSORS_G760A
+ tristate "GMT G760A"
+ depends on I2C
+ help
+ If you say yes here you get support for Global Mixed-mode
+ Technology Inc G760A fan speed PWM controller chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called g760a.
+
+config SENSORS_G762
+ tristate "GMT G762 and G763"
+ depends on I2C
+ help
+ If you say yes here you get support for Global Mixed-mode
+ Technology Inc G762 and G763 fan speed PWM controller chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called g762.
+
config SENSORS_GPIO_FAN
tristate "GPIO fan"
depends on GPIOLIB
This driver can also be built as a module. If so, the module
will be called hih6130.
-config SENSORS_HTU21
- tristate "Measurement Specialties HTU21D humidity/temperature sensors"
- depends on I2C
- help
- If you say yes here you get support for the Measurement Specialties
- HTU21D humidity and temperature sensors.
-
- This driver can also be built as a module. If so, the module
- will be called htu21.
-
-config SENSORS_CORETEMP
- tristate "Intel Core/Core2/Atom temperature sensor"
- depends on X86
- help
- If you say yes here you get support for the temperature
- sensor inside your CPU. Most of the family 6 CPUs
- are supported. Check Documentation/hwmon/coretemp for details.
-
config SENSORS_IBMAEM
tristate "IBM Active Energy Manager temperature/power sensors and control"
select IPMI_SI
for those channels specified in the map. This map can be provided
either via platform data or the device tree bindings.
+config SENSORS_CORETEMP
+ tristate "Intel Core/Core2/Atom temperature sensor"
+ depends on X86
+ help
+ If you say yes here you get support for the temperature
+ sensor inside your CPU. Most of the family 6 CPUs
+ are supported. Check Documentation/hwmon/coretemp for details.
+
config SENSORS_IT87
tristate "ITE IT87xx and compatibles"
depends on !PPC
This driver can also be built as a module. If so, the module
will be called lineage-pem.
-config SENSORS_LM63
- tristate "National Semiconductor LM63 and compatibles"
+config SENSORS_LTC2945
+ tristate "Linear Technology LTC2945"
depends on I2C
+ select REGMAP_I2C
+ default n
help
- If you say yes here you get support for the National
- Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
- sensors with integrated fan control. Such chips are found
- on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
- others.
+ If you say yes here you get support for Linear Technology LTC2945
+ I2C System Monitor.
- This driver can also be built as a module. If so, the module
- will be called lm63.
+ This driver can also be built as a module. If so, the module will
+ be called ltc2945.
-config SENSORS_LM70
- tristate "National Semiconductor LM70 and compatibles"
- depends on SPI_MASTER
+config SENSORS_LTC4151
+ tristate "Linear Technology LTC4151"
+ depends on I2C
+ default n
help
- If you say yes here you get support for the National Semiconductor
- LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera-
- ture sensor chips.
+ If you say yes here you get support for Linear Technology LTC4151
+ High Voltage I2C Current and Voltage Monitor interface.
- This driver can also be built as a module. If so, the module
- will be called lm70.
+ This driver can also be built as a module. If so, the module will
+ be called ltc4151.
-config SENSORS_LM73
- tristate "National Semiconductor LM73"
+config SENSORS_LTC4215
+ tristate "Linear Technology LTC4215"
depends on I2C
+ default n
help
- If you say yes here you get support for National Semiconductor LM73
- sensor chips.
- This driver can also be built as a module. If so, the module
- will be called lm73.
+ If you say yes here you get support for Linear Technology LTC4215
+ Hot Swap Controller I2C interface.
-config SENSORS_LM75
- tristate "National Semiconductor LM75 and compatibles"
+ This driver can also be built as a module. If so, the module will
+ be called ltc4215.
+
+config SENSORS_LTC4222
+ tristate "Linear Technology LTC4222"
depends on I2C
- depends on THERMAL || !THERMAL_OF
+ select REGMAP_I2C
+ default n
help
- If you say yes here you get support for one common type of
- temperature sensor chip, with models including:
-
- - Analog Devices ADT75
- - Dallas Semiconductor DS75, DS1775 and DS7505
- - Global Mixed-mode Technology (GMT) G751
- - Maxim MAX6625 and MAX6626
- - Microchip MCP980x
- - National Semiconductor LM75, LM75A
- - NXP's LM75A
- - ST Microelectronics STDS75
- - TelCom (now Microchip) TCN75
- - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
- TMP275
+ If you say yes here you get support for Linear Technology LTC4222
+ Dual Hot Swap Controller I2C interface.
- This driver supports driver model based binding through board
- specific I2C device tables.
+ This driver can also be built as a module. If so, the module will
+ be called ltc4222.
- It also supports the "legacy" style of driver binding. To use
- that with some chips which don't replicate LM75 quirks exactly,
- you may need the "force" module parameter.
+config SENSORS_LTC4245
+ tristate "Linear Technology LTC4245"
+ depends on I2C
+ default n
+ help
+ If you say yes here you get support for Linear Technology LTC4245
+ Multiple Supply Hot Swap Controller I2C interface.
- This driver can also be built as a module. If so, the module
- will be called lm75.
+ This driver can also be built as a module. If so, the module will
+ be called ltc4245.
-config SENSORS_LM77
- tristate "National Semiconductor LM77"
+config SENSORS_LTC4260
+ tristate "Linear Technology LTC4260"
depends on I2C
+ select REGMAP_I2C
+ default n
help
- If you say yes here you get support for National Semiconductor LM77
- sensor chips.
+ If you say yes here you get support for Linear Technology LTC4260
+ Positive Voltage Hot Swap Controller I2C interface.
- This driver can also be built as a module. If so, the module
- will be called lm77.
+ This driver can also be built as a module. If so, the module will
+ be called ltc4260.
-config SENSORS_LM78
- tristate "National Semiconductor LM78 and compatibles"
+config SENSORS_LTC4261
+ tristate "Linear Technology LTC4261"
depends on I2C
- select HWMON_VID
+ default n
help
- If you say yes here you get support for National Semiconductor LM78,
- LM78-J and LM79.
+ If you say yes here you get support for Linear Technology LTC4261
+ Negative Voltage Hot Swap Controller I2C interface.
- This driver can also be built as a module. If so, the module
- will be called lm78.
+ This driver can also be built as a module. If so, the module will
+ be called ltc4261.
-config SENSORS_LM80
- tristate "National Semiconductor LM80 and LM96080"
- depends on I2C
+config SENSORS_MAX1111
+ tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
+ depends on SPI_MASTER
help
- If you say yes here you get support for National Semiconductor
- LM80 and LM96080 sensor chips.
+ Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
+ ADC chips.
This driver can also be built as a module. If so, the module
- will be called lm80.
+ will be called max1111.
-config SENSORS_LM83
- tristate "National Semiconductor LM83 and compatibles"
+config SENSORS_MAX16065
+ tristate "Maxim MAX16065 System Manager and compatibles"
depends on I2C
help
- If you say yes here you get support for National Semiconductor
- LM82 and LM83 sensor chips.
+ If you say yes here you get support for hardware monitoring
+ capabilities of the following Maxim System Manager chips.
+ MAX16065
+ MAX16066
+ MAX16067
+ MAX16068
+ MAX16070
+ MAX16071
This driver can also be built as a module. If so, the module
- will be called lm83.
+ will be called max16065.
-config SENSORS_LM85
- tristate "National Semiconductor LM85 and compatibles"
+config SENSORS_MAX1619
+ tristate "Maxim MAX1619 sensor chip"
depends on I2C
- select HWMON_VID
help
- If you say yes here you get support for National Semiconductor LM85
- sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
- EMC6D101, EMC6D102, and EMC6D103.
+ If you say yes here you get support for MAX1619 sensor chip.
This driver can also be built as a module. If so, the module
- will be called lm85.
+ will be called max1619.
-config SENSORS_LM87
- tristate "National Semiconductor LM87 and compatibles"
+config SENSORS_MAX1668
+ tristate "Maxim MAX1668 and compatibles"
depends on I2C
- select HWMON_VID
help
- If you say yes here you get support for National Semiconductor LM87
- and Analog Devices ADM1024 sensor chips.
+ If you say yes here you get support for MAX1668, MAX1989 and
+ MAX1805 chips.
This driver can also be built as a module. If so, the module
- will be called lm87.
+ will be called max1668.
-config SENSORS_LM90
- tristate "National Semiconductor LM90 and compatibles"
+config SENSORS_MAX197
+ tristate "Maxim MAX197 and compatibles"
+ help
+ Support for the Maxim MAX197 A/D converter.
+ Support will include, but not be limited to, MAX197, and MAX199.
+
+ This driver can also be built as a module. If so, the module
+ will be called max197.
+
+config SENSORS_MAX6639
+ tristate "Maxim MAX6639 sensor chip"
depends on I2C
help
- If you say yes here you get support for National Semiconductor LM90,
- LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
- Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
- MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
- Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781
+ If you say yes here you get support for the MAX6639
sensor chips.
This driver can also be built as a module. If so, the module
- will be called lm90.
+ will be called max6639.
-config SENSORS_LM92
- tristate "National Semiconductor LM92 and compatibles"
+config SENSORS_MAX6642
+ tristate "Maxim MAX6642 sensor chip"
depends on I2C
help
- If you say yes here you get support for National Semiconductor LM92
- and Maxim MAX6635 sensor chips.
+ If you say yes here you get support for MAX6642 sensor chip.
+ MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
+ with Overtemperature Alarm from Maxim.
This driver can also be built as a module. If so, the module
- will be called lm92.
+ will be called max6642.
-config SENSORS_LM93
- tristate "National Semiconductor LM93 and compatibles"
+config SENSORS_MAX6650
+ tristate "Maxim MAX6650 sensor chip"
depends on I2C
- select HWMON_VID
help
- If you say yes here you get support for National Semiconductor LM93,
- LM94, and compatible sensor chips.
+ If you say yes here you get support for the MAX6650 / MAX6651
+ sensor chips.
This driver can also be built as a module. If so, the module
- will be called lm93.
+ will be called max6650.
-config SENSORS_LTC2945
- tristate "Linear Technology LTC2945"
+config SENSORS_MAX6697
+ tristate "Maxim MAX6697 and compatibles"
depends on I2C
- select REGMAP_I2C
- default n
help
- If you say yes here you get support for Linear Technology LTC2945
- I2C System Monitor.
+ If you say yes here you get support for MAX6581, MAX6602, MAX6622,
+ MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
+ temperature sensor chips.
- This driver can also be built as a module. If so, the module will
- be called ltc2945.
+ This driver can also be built as a module. If so, the module
+ will be called max6697.
-config SENSORS_LTC4151
- tristate "Linear Technology LTC4151"
+config SENSORS_HTU21
+ tristate "Measurement Specialties HTU21D humidity/temperature sensors"
depends on I2C
- default n
help
- If you say yes here you get support for Linear Technology LTC4151
- High Voltage I2C Current and Voltage Monitor interface.
+ If you say yes here you get support for the Measurement Specialties
+ HTU21D humidity and temperature sensors.
- This driver can also be built as a module. If so, the module will
- be called ltc4151.
+ This driver can also be built as a module. If so, the module
+ will be called htu21.
-config SENSORS_LTC4215
- tristate "Linear Technology LTC4215"
+config SENSORS_MCP3021
+ tristate "Microchip MCP3021 and compatibles"
depends on I2C
- default n
help
- If you say yes here you get support for Linear Technology LTC4215
- Hot Swap Controller I2C interface.
+ If you say yes here you get support for MCP3021 and MCP3221.
+ The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
+ with 12-bit resolution.
- This driver can also be built as a module. If so, the module will
- be called ltc4215.
+ This driver can also be built as a module. If so, the module
+ will be called mcp3021.
-config SENSORS_LTC4222
- tristate "Linear Technology LTC4222"
- depends on I2C
- select REGMAP_I2C
- default n
+config SENSORS_ADCXX
+ tristate "National Semiconductor ADCxxxSxxx"
+ depends on SPI_MASTER
help
- If you say yes here you get support for Linear Technology LTC4222
- Dual Hot Swap Controller I2C interface.
+ If you say yes here you get support for the National Semiconductor
+ ADC<bb><c>S<sss> chip family, where
+ * bb is the resolution in number of bits (8, 10, 12)
+ * c is the number of channels (1, 2, 4, 8)
+ * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
+ kSPS and 101 for 1 MSPS)
- This driver can also be built as a module. If so, the module will
- be called ltc4222.
+ Examples : ADC081S101, ADC124S501, ...
-config SENSORS_LTC4245
- tristate "Linear Technology LTC4245"
+ This driver can also be built as a module. If so, the module
+ will be called adcxx.
+
+config SENSORS_LM63
+ tristate "National Semiconductor LM63 and compatibles"
depends on I2C
- default n
help
- If you say yes here you get support for Linear Technology LTC4245
- Multiple Supply Hot Swap Controller I2C interface.
+ If you say yes here you get support for the National
+ Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
+ sensors with integrated fan control. Such chips are found
+ on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
+ others.
- This driver can also be built as a module. If so, the module will
- be called ltc4245.
+ This driver can also be built as a module. If so, the module
+ will be called lm63.
-config SENSORS_LTC4260
- tristate "Linear Technology LTC4260"
- depends on I2C
- select REGMAP_I2C
- default n
+config SENSORS_LM70
+ tristate "National Semiconductor LM70 and compatibles"
+ depends on SPI_MASTER
help
- If you say yes here you get support for Linear Technology LTC4260
- Positive Voltage Hot Swap Controller I2C interface.
+ If you say yes here you get support for the National Semiconductor
+ LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera-
+ ture sensor chips.
- This driver can also be built as a module. If so, the module will
- be called ltc4260.
+ This driver can also be built as a module. If so, the module
+ will be called lm70.
-config SENSORS_LTC4261
- tristate "Linear Technology LTC4261"
+config SENSORS_LM73
+ tristate "National Semiconductor LM73"
depends on I2C
- default n
help
- If you say yes here you get support for Linear Technology LTC4261
- Negative Voltage Hot Swap Controller I2C interface.
-
- This driver can also be built as a module. If so, the module will
- be called ltc4261.
+ If you say yes here you get support for National Semiconductor LM73
+ sensor chips.
+ This driver can also be built as a module. If so, the module
+ will be called lm73.
-config SENSORS_LM95234
- tristate "National Semiconductor LM95234"
+config SENSORS_LM75
+ tristate "National Semiconductor LM75 and compatibles"
depends on I2C
+ depends on THERMAL || !THERMAL_OF
help
- If you say yes here you get support for the LM95234 temperature
- sensor.
+ If you say yes here you get support for one common type of
+ temperature sensor chip, with models including:
+
+ - Analog Devices ADT75
+ - Dallas Semiconductor DS75, DS1775 and DS7505
+ - Global Mixed-mode Technology (GMT) G751
+ - Maxim MAX6625 and MAX6626
+ - Microchip MCP980x
+ - National Semiconductor LM75, LM75A
+ - NXP's LM75A
+ - ST Microelectronics STDS75
+ - TelCom (now Microchip) TCN75
+ - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
+ TMP275
+
+ This driver supports driver model based binding through board
+ specific I2C device tables.
+
+ It also supports the "legacy" style of driver binding. To use
+ that with some chips which don't replicate LM75 quirks exactly,
+ you may need the "force" module parameter.
This driver can also be built as a module. If so, the module
- will be called lm95234.
+ will be called lm75.
-config SENSORS_LM95241
- tristate "National Semiconductor LM95241 and compatibles"
+config SENSORS_LM77
+ tristate "National Semiconductor LM77"
depends on I2C
help
- If you say yes here you get support for LM95231 and LM95241 sensor
- chips.
+ If you say yes here you get support for National Semiconductor LM77
+ sensor chips.
This driver can also be built as a module. If so, the module
- will be called lm95241.
+ will be called lm77.
-config SENSORS_LM95245
- tristate "National Semiconductor LM95245 sensor chip"
+config SENSORS_LM78
+ tristate "National Semiconductor LM78 and compatibles"
depends on I2C
+ select HWMON_VID
help
- If you say yes here you get support for LM95245 sensor chip.
+ If you say yes here you get support for National Semiconductor LM78,
+ LM78-J and LM79.
This driver can also be built as a module. If so, the module
- will be called lm95245.
+ will be called lm78.
-config SENSORS_MAX1111
- tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
- depends on SPI_MASTER
+config SENSORS_LM80
+ tristate "National Semiconductor LM80 and LM96080"
+ depends on I2C
help
- Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
- ADC chips.
+ If you say yes here you get support for National Semiconductor
+ LM80 and LM96080 sensor chips.
This driver can also be built as a module. If so, the module
- will be called max1111.
+ will be called lm80.
-config SENSORS_MAX16065
- tristate "Maxim MAX16065 System Manager and compatibles"
+config SENSORS_LM83
+ tristate "National Semiconductor LM83 and compatibles"
depends on I2C
help
- If you say yes here you get support for hardware monitoring
- capabilities of the following Maxim System Manager chips.
- MAX16065
- MAX16066
- MAX16067
- MAX16068
- MAX16070
- MAX16071
+ If you say yes here you get support for National Semiconductor
+ LM82 and LM83 sensor chips.
This driver can also be built as a module. If so, the module
- will be called max16065.
+ will be called lm83.
-config SENSORS_MAX1619
- tristate "Maxim MAX1619 sensor chip"
+config SENSORS_LM85
+ tristate "National Semiconductor LM85 and compatibles"
depends on I2C
+ select HWMON_VID
help
- If you say yes here you get support for MAX1619 sensor chip.
+ If you say yes here you get support for National Semiconductor LM85
+ sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
+ EMC6D101, EMC6D102, and EMC6D103.
This driver can also be built as a module. If so, the module
- will be called max1619.
+ will be called lm85.
-config SENSORS_MAX1668
- tristate "Maxim MAX1668 and compatibles"
+config SENSORS_LM87
+ tristate "National Semiconductor LM87 and compatibles"
depends on I2C
+ select HWMON_VID
help
- If you say yes here you get support for MAX1668, MAX1989 and
- MAX1805 chips.
+ If you say yes here you get support for National Semiconductor LM87
+ and Analog Devices ADM1024 sensor chips.
This driver can also be built as a module. If so, the module
- will be called max1668.
-
-config SENSORS_MAX197
- tristate "Maxim MAX197 and compatibles"
- help
- Support for the Maxim MAX197 A/D converter.
- Support will include, but not be limited to, MAX197, and MAX199.
-
- This driver can also be built as a module. If so, the module
- will be called max197.
+ will be called lm87.
-config SENSORS_MAX6639
- tristate "Maxim MAX6639 sensor chip"
+config SENSORS_LM90
+ tristate "National Semiconductor LM90 and compatibles"
depends on I2C
help
- If you say yes here you get support for the MAX6639
+ If you say yes here you get support for National Semiconductor LM90,
+ LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
+ Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
+ MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
+ Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781
sensor chips.
This driver can also be built as a module. If so, the module
- will be called max6639.
+ will be called lm90.
-config SENSORS_MAX6642
- tristate "Maxim MAX6642 sensor chip"
+config SENSORS_LM92
+ tristate "National Semiconductor LM92 and compatibles"
depends on I2C
help
- If you say yes here you get support for MAX6642 sensor chip.
- MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
- with Overtemperature Alarm from Maxim.
+ If you say yes here you get support for National Semiconductor LM92
+ and Maxim MAX6635 sensor chips.
This driver can also be built as a module. If so, the module
- will be called max6642.
+ will be called lm92.
-config SENSORS_MAX6650
- tristate "Maxim MAX6650 sensor chip"
+config SENSORS_LM93
+ tristate "National Semiconductor LM93 and compatibles"
depends on I2C
+ select HWMON_VID
help
- If you say yes here you get support for the MAX6650 / MAX6651
- sensor chips.
+ If you say yes here you get support for National Semiconductor LM93,
+ LM94, and compatible sensor chips.
This driver can also be built as a module. If so, the module
- will be called max6650.
+ will be called lm93.
-config SENSORS_MAX6697
- tristate "Maxim MAX6697 and compatibles"
+config SENSORS_LM95234
+ tristate "National Semiconductor LM95234"
depends on I2C
help
- If you say yes here you get support for MAX6581, MAX6602, MAX6622,
- MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
- temperature sensor chips.
+ If you say yes here you get support for the LM95234 temperature
+ sensor.
This driver can also be built as a module. If so, the module
- will be called max6697.
+ will be called lm95234.
-config SENSORS_MCP3021
- tristate "Microchip MCP3021 and compatibles"
+config SENSORS_LM95241
+ tristate "National Semiconductor LM95241 and compatibles"
depends on I2C
help
- If you say yes here you get support for MCP3021 and MCP3221.
- The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
- with 12-bit resolution.
-
- This driver can also be built as a module. If so, the module
- will be called mcp3021.
-
-config SENSORS_NCT6775
- tristate "Nuvoton NCT6775F and compatibles"
- depends on !PPC
- select HWMON_VID
- help
- If you say yes here you get support for the hardware monitoring
- functionality of the Nuvoton NCT6775F, NCT6776F, NCT6779D
- and compatible Super-I/O chips. This driver replaces the
- w83627ehf driver for NCT6775F and NCT6776F.
+ If you say yes here you get support for LM95231 and LM95241 sensor
+ chips.
This driver can also be built as a module. If so, the module
- will be called nct6775.
+ will be called lm95241.
-config SENSORS_NTC_THERMISTOR
- tristate "NTC thermistor support"
- depends on (!OF && !IIO) || (OF && IIO)
+config SENSORS_LM95245
+ tristate "National Semiconductor LM95245 sensor chip"
+ depends on I2C
help
- This driver supports NTC thermistors sensor reading and its
- interpretation. The driver can also monitor the temperature and
- send notifications about the temperature.
-
- Currently, this driver supports
- NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
+ If you say yes here you get support for LM95245 sensor chip.
This driver can also be built as a module. If so, the module
- will be called ntc-thermistor.
+ will be called lm95245.
config SENSORS_PC87360
tristate "National Semiconductor PC87360 family"
This driver can also be built as a module. If so, the module
will be called pc87427.
+config SENSORS_NTC_THERMISTOR
+ tristate "NTC thermistor support"
+ depends on (!OF && !IIO) || (OF && IIO)
+ help
+ This driver supports NTC thermistors sensor reading and its
+ interpretation. The driver can also monitor the temperature and
+ send notifications about the temperature.
+
+ Currently, this driver supports
+ NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
+
+ This driver can also be built as a module. If so, the module
+ will be called ntc-thermistor.
+
+config SENSORS_NCT6775
+ tristate "Nuvoton NCT6775F and compatibles"
+ depends on !PPC
+ select HWMON_VID
+ help
+ If you say yes here you get support for the hardware monitoring
+ functionality of the Nuvoton NCT6775F, NCT6776F, NCT6779D
+ and compatible Super-I/O chips. This driver replaces the
+ w83627ehf driver for NCT6775F and NCT6776F.
+
+ This driver can also be built as a module. If so, the module
+ will be called nct6775.
+
config SENSORS_PCF8591
tristate "Philips PCF8591 ADC/DAC"
depends on I2C
This driver can also be built as a module. If so, the module
will be called sis5595.
-config SENSORS_SMM665
- tristate "Summit Microelectronics SMM665"
- depends on I2C
- default n
- help
- If you say yes here you get support for the hardware monitoring
- features of the Summit Microelectronics SMM665/SMM665B Six-Channel
- Active DC Output Controller / Monitor.
-
- Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
- Support for those chips is untested.
-
- This driver can also be built as a module. If so, the module will
- be called smm665.
-
config SENSORS_DME1737
tristate "SMSC DME1737, SCH311x and compatibles"
depends on I2C && !PPC
This driver can also be built as a module. If so, the module
will be called sch5636.
+config SENSORS_SMM665
+ tristate "Summit Microelectronics SMM665"
+ depends on I2C
+ default n
+ help
+ If you say yes here you get support for the hardware monitoring
+ features of the Summit Microelectronics SMM665/SMM665B Six-Channel
+ Active DC Output Controller / Monitor.
+
+ Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
+ Support for those chips is untested.
+
+ This driver can also be built as a module. If so, the module will
+ be called smm665.
+
config SENSORS_ADS1015
tristate "Texas Instruments ADS1015"
depends on I2C
This driver provides support for the Ultra45 workstation environmental
sensors.
-config SENSORS_APPLESMC
- tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
- depends on INPUT && X86
- select NEW_LEDS
- select LEDS_CLASS
- select INPUT_POLLDEV
- default n
- help
- This driver provides support for the Apple System Management
- Controller, which provides an accelerometer (Apple Sudden Motion
- Sensor), light sensors, temperature sensors, keyboard backlight
- control and fan control.
-
- Only Intel-based Apple's computers are supported (MacBook Pro,
- MacBook, MacMini).
-
- Data from the different sensors, keyboard backlight control and fan
- control are accessible via sysfs.
-
- This driver also provides an absolute input class device, allowing
- the laptop to act as a pinball machine-esque joystick.
-
- Say Y here if you have an applicable laptop and want to experience
- the awesome power of applesmc.
-
-config SENSORS_MC13783_ADC
- tristate "Freescale MC13783/MC13892 ADC"
- depends on MFD_MC13XXX
- help
- Support for the A/D converter on MC13783 and MC13892 PMIC.
-
if ACPI
comment "ACPI drivers"
projects / openwrt / staging / blogic.git / commitdiff