Some copper SFP modules come with Marvell's 88E1xxx PHY and need this
module to function. Package it, so users can easily install this PHY
driver and use e.g. FINISAR CORP. FCLF-8521-3-HC SFP.
Without marvell PHY driver:
sfp sfp2: module FINISAR CORP. FCLF-8521-3-HC rev A sn XXXXXXX dc XXXXXX
mt7530 mdio-bus:1f sfp2: validation with support
0000000,
00000000,
00000000 failed: -22
sfp sfp2: sfp_add_phy failed: -22
With marvell PHY driver:
sfp sfp2: module FINISAR CORP. FCLF-8521-3-HC rev A sn XXXXXXX dc XXXXXX
mt7530 mdio-bus:1f sfp2: switched to inband/sgmii link mode
mt7530 mdio-bus:1f sfp2: PHY [i2c:sfp2:16] driver [Marvell
88E1111] (irq=POLL)
mt7530 mdio-bus:1f sfp2: Link is Up - 1Gbps/Full - flow control rx/tx
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
$(eval $(call KernelPackage,phy-bcm84881))
+define KernelPackage/phy-marvell
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=Marvell Gigabit Ethernet PHY driver
+ KCONFIG:=CONFIG_MARVELL_PHY
+ DEPENDS:=+kmod-libphy
+ FILES:=$(LINUX_DIR)/drivers/net/phy/marvell.ko
+ AUTOLOAD:=$(call AutoLoad,18,marvell)
+endef
+
+define KernelPackage/phy-marvell/description
+ Supports Marvell Gigabit Ethernet PHYs:
+ * 88E1101
+ * 88E1112
+ * 88E1111 (incl. Finisar variant)
+ * 88E1118
+ * 88E1121R
+ * 88E1145
+ * 88E1149R
+ * 88E1240
+ * 88E1318S
+ * 88E1116R
+ * 88E1510
+ * 88E1540
+ * 88E1545
+ * 88E3016
+ * 88E6341 family
+ * 88E6390 family
+ * 88E6393 family
+ * 88E1340S
+ * 88E1548P
+endef
+
+$(eval $(call KernelPackage,phy-marvell))
+
define KernelPackage/phy-realtek
SUBMENU:=$(NETWORK_DEVICES_MENU)