bool
default BUSYBOX_DEFAULT_HAVE_DOT_CONFIG
-menu "Busybox Settings"
+menu "Settings"
config BUSYBOX_CONFIG_DESKTOP
bool "Enable compatibility for full-blown desktop systems"
endchoice
-endmenu
-
source libbb/Config.in
+endmenu
+
comment "Applets"
source archival/Config.in
source coreutils/Config.in
source console-tools/Config.in
source debianutils/Config.in
+source klibc-utils/Config.in
source editors/Config.in
source findutils/Config.in
source init/Config.in
# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
+# see docs/Kconfig-language.txt.
#
menu "Archival Utilities"
default BUSYBOX_DEFAULT_FEATURE_SEAMLESS_Z # it is ancient
config BUSYBOX_CONFIG_AR
- bool "ar"
+ bool "ar (9.5 kb)"
default BUSYBOX_DEFAULT_AR # needs to be improved to be able to replace binutils ar
help
ar is an archival utility program used to create, modify, and
extract contents from archives. In practice, it is used exclusively
for object module archives used by compilers.
- On an x86 system, the ar applet adds about 1K.
-
Unless you have a specific application which requires ar, you should
probably say N here: most compilers come with their own ar utility.
help
This enables archive creation (-c and -r) with busybox ar.
config BUSYBOX_CONFIG_UNCOMPRESS
- bool "uncompress"
+ bool "uncompress (7.1 kb)"
default BUSYBOX_DEFAULT_UNCOMPRESS # ancient
help
uncompress is used to decompress archives created by compress.
Not much used anymore, replaced by gzip/gunzip.
config BUSYBOX_CONFIG_GUNZIP
- bool "gunzip"
+ bool "gunzip (11 kb)"
default BUSYBOX_DEFAULT_GUNZIP
select BUSYBOX_CONFIG_FEATURE_GZIP_DECOMPRESS
help
gunzip is used to decompress archives created by gzip.
- You can use the `-t' option to test the integrity of
+ You can use the '-t' option to test the integrity of
an archive, without decompressing it.
config BUSYBOX_CONFIG_ZCAT
- bool "zcat"
+ bool "zcat (24 kb)"
default BUSYBOX_DEFAULT_ZCAT
select BUSYBOX_CONFIG_FEATURE_GZIP_DECOMPRESS
help
default BUSYBOX_DEFAULT_FEATURE_GUNZIP_LONG_OPTIONS
depends on (BUSYBOX_CONFIG_GUNZIP || BUSYBOX_CONFIG_ZCAT) && BUSYBOX_CONFIG_LONG_OPTS
config BUSYBOX_CONFIG_BUNZIP2
- bool "bunzip2"
+ bool "bunzip2 (8.7 kb)"
default BUSYBOX_DEFAULT_BUNZIP2
select BUSYBOX_CONFIG_FEATURE_BZIP2_DECOMPRESS
help
should probably say N here.
config BUSYBOX_CONFIG_BZCAT
- bool "bzcat"
+ bool "bzcat (8.7 kb)"
default BUSYBOX_DEFAULT_BZCAT
select BUSYBOX_CONFIG_FEATURE_BZIP2_DECOMPRESS
help
Alias to "bunzip2 -c".
config BUSYBOX_CONFIG_UNLZMA
- bool "unlzma"
+ bool "unlzma (7.5 kb)"
default BUSYBOX_DEFAULT_UNLZMA
help
unlzma is a compression utility using the Lempel-Ziv-Markov chain
is generally considerably better than that achieved by the bzip2
compressors.
- The BusyBox unlzma applet is limited to decompression only.
- On an x86 system, this applet adds about 4K.
-
config BUSYBOX_CONFIG_LZCAT
- bool "lzcat"
+ bool "lzcat (7.5 kb)"
default BUSYBOX_DEFAULT_LZCAT
help
- unlzma is a compression utility using the Lempel-Ziv-Markov chain
- compression algorithm, and range coding. Compression
- is generally considerably better than that achieved by the bzip2
- compressors.
-
- The BusyBox unlzma applet is limited to decompression only.
- On an x86 system, this applet adds about 4K.
+ Alias to "unlzma -c".
config BUSYBOX_CONFIG_LZMA
bool "lzma -d"
help
Enable this option if you want commands like "lzma -d" to work.
IOW: you'll get lzma applet, but it will always require -d option.
-
-config BUSYBOX_CONFIG_FEATURE_LZMA_FAST
- bool "Optimize for speed"
- default BUSYBOX_DEFAULT_FEATURE_LZMA_FAST
- depends on BUSYBOX_CONFIG_UNLZMA || BUSYBOX_CONFIG_LZCAT || BUSYBOX_CONFIG_LZMA
- help
- This option reduces decompression time by about 25% at the cost of
- a 1K bigger binary.
config BUSYBOX_CONFIG_UNXZ
- bool "unxz"
+ bool "unxz (13 kb)"
default BUSYBOX_DEFAULT_UNXZ
help
unxz is a unlzma successor.
config BUSYBOX_CONFIG_XZCAT
- bool "xzcat"
+ bool "xzcat (13 kb)"
default BUSYBOX_DEFAULT_XZCAT
help
Alias to "unxz -c".
Enable this option if you want commands like "xz -d" to work.
IOW: you'll get xz applet, but it will always require -d option.
config BUSYBOX_CONFIG_BZIP2
- bool "bzip2"
+ bool "bzip2 (16 kb)"
default BUSYBOX_DEFAULT_BZIP2
help
bzip2 is a compression utility using the Burrows-Wheeler block
should probably say N here.
config BUSYBOX_CONFIG_BZIP2_SMALL
- int "Trade size for speed (0:fast 9:slow)"
- default BUSYBOX_DEFAULT_BZIP2_SMALL
+ int "Trade bytes for speed (0:fast, 9:small)"
+ default BUSYBOX_DEFAULT_BZIP2_SMALL # all "fast or small" options default to small
range 0 9
depends on BUSYBOX_CONFIG_BZIP2
help
- 0 is faster but larger
- 9 is smaller but slower
+ Trade code size versus speed.
+ Approximate values with gcc-6.3.0 "bzip -9" compressing
+ linux-4.15.tar were:
+ value time (sec) code size (386)
+ 9 (smallest) 70.11 7687
+ 8 67.93 8091
+ 7 67.88 8405
+ 6 67.78 8624
+ 5 67.05 9427
+ 4-0 (fastest) 64.14 12083
config BUSYBOX_CONFIG_FEATURE_BZIP2_DECOMPRESS
bool "Enable decompression"
This will be automatically selected if bunzip2 or bzcat is
enabled.
config BUSYBOX_CONFIG_CPIO
- bool "cpio"
+ bool "cpio (15 kb)"
default BUSYBOX_DEFAULT_CPIO
help
cpio is an archival utility program used to create, modify, and
help
Passthrough mode. Rarely used.
config BUSYBOX_CONFIG_DPKG
- bool "dpkg"
+ bool "dpkg (43 kb)"
default BUSYBOX_DEFAULT_DPKG
select BUSYBOX_CONFIG_FEATURE_SEAMLESS_GZ
help
This implementation of dpkg has a number of limitations,
you should use the official dpkg if possible.
config BUSYBOX_CONFIG_DPKG_DEB
- bool "dpkg_deb"
+ bool "dpkg-deb (30 kb)"
default BUSYBOX_DEFAULT_DPKG_DEB
select BUSYBOX_CONFIG_FEATURE_SEAMLESS_GZ
help
Unless you have a specific application which requires dpkg-deb,
say N here.
config BUSYBOX_CONFIG_GZIP
- bool "gzip"
+ bool "gzip (17 kb)"
default BUSYBOX_DEFAULT_GZIP
help
gzip is used to compress files.
This will be automatically selected if gunzip or zcat is
enabled.
config BUSYBOX_CONFIG_LZOP
- bool "lzop"
+ bool "lzop (12 kb)"
default BUSYBOX_DEFAULT_LZOP
help
Lzop compression/decompresion.
config BUSYBOX_CONFIG_UNLZOP
- bool "unlzop"
+ bool "unlzop (13 kb)"
default BUSYBOX_DEFAULT_UNLZOP # INCOMPAT: upstream lzop does not provide such tool
help
Lzop decompresion.
config BUSYBOX_CONFIG_LZOPCAT
- bool "lzopcat"
+ bool "lzopcat (13 kb)"
default BUSYBOX_DEFAULT_LZOPCAT # INCOMPAT: upstream lzop does not provide such tool
help
- Alias to "unlzop -c".
+ Alias to "lzop -dc".
config BUSYBOX_CONFIG_LZOP_COMPR_HIGH
bool "lzop compression levels 7,8,9 (not very useful)"
are actually slower than gzip at equivalent compression ratios
and take up 3.2K of code.
config BUSYBOX_CONFIG_RPM
- bool "rpm"
+ bool "rpm (32 kb)"
default BUSYBOX_DEFAULT_RPM
help
Mini RPM applet - queries and extracts RPM packages.
config BUSYBOX_CONFIG_RPM2CPIO
- bool "rpm2cpio"
+ bool "rpm2cpio (21 kb)"
default BUSYBOX_DEFAULT_RPM2CPIO
help
Converts a RPM file into a CPIO archive.
config BUSYBOX_CONFIG_TAR
- bool "tar"
+ bool "tar (39 kb)"
default BUSYBOX_DEFAULT_TAR
help
tar is an archiving program. It's commonly used with gzip to
tarballs. Currently it works only on files (not pipes etc).
config BUSYBOX_CONFIG_FEATURE_TAR_FROM
- bool "Enable -X (exclude from) and -T (include from) options)"
+ bool "Enable -X (exclude from) and -T (include from) options"
default BUSYBOX_DEFAULT_FEATURE_TAR_FROM
depends on BUSYBOX_CONFIG_TAR
help
With this option busybox supports restoring SELinux labels
when extracting files from tar archives.
config BUSYBOX_CONFIG_UNZIP
- bool "unzip"
+ bool "unzip (26 kb)"
default BUSYBOX_DEFAULT_UNZIP
help
unzip will list or extract files from a ZIP archive,
default BUSYBOX_DEFAULT_FEATURE_UNZIP_XZ
depends on BUSYBOX_CONFIG_FEATURE_UNZIP_CDF && BUSYBOX_CONFIG_DESKTOP
+config BUSYBOX_CONFIG_FEATURE_LZMA_FAST
+ bool "Optimize lzma for speed"
+ default BUSYBOX_DEFAULT_FEATURE_LZMA_FAST
+ depends on BUSYBOX_CONFIG_UNLZMA || BUSYBOX_CONFIG_LZCAT || BUSYBOX_CONFIG_LZMA || BUSYBOX_CONFIG_FEATURE_SEAMLESS_LZMA
+ help
+ This option reduces decompression time by about 25% at the cost of
+ a 1K bigger binary.
+
endmenu
# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
+# see docs/Kconfig-language.txt.
#
menu "Console Utilities"
config BUSYBOX_CONFIG_CHVT
- bool "chvt"
+ bool "chvt (2 kb)"
default BUSYBOX_DEFAULT_CHVT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
This program is used to change to another terminal.
Example: chvt 4 (change to terminal /dev/tty4)
config BUSYBOX_CONFIG_CLEAR
- bool "clear"
+ bool "clear (tiny)"
default BUSYBOX_DEFAULT_CLEAR
help
This program clears the terminal screen.
config BUSYBOX_CONFIG_DEALLOCVT
- bool "deallocvt"
+ bool "deallocvt (1.9 kb)"
default BUSYBOX_DEFAULT_DEALLOCVT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
This program deallocates unused virtual consoles.
config BUSYBOX_CONFIG_DUMPKMAP
- bool "dumpkmap"
+ bool "dumpkmap (1.6 kb)"
default BUSYBOX_DEFAULT_DUMPKMAP
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
This program dumps the kernel's keyboard translation table to
stdout, in binary format. You can then use loadkmap to load it.
config BUSYBOX_CONFIG_FGCONSOLE
- bool "fgconsole"
+ bool "fgconsole (1.5 kb)"
default BUSYBOX_DEFAULT_FGCONSOLE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
This program prints active (foreground) console number.
config BUSYBOX_CONFIG_KBD_MODE
- bool "kbd_mode"
+ bool "kbd_mode (4.1 kb)"
default BUSYBOX_DEFAULT_KBD_MODE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
This program reports and sets keyboard mode.
config BUSYBOX_CONFIG_LOADFONT
- bool "loadfont"
+ bool "loadfont (5.2 kb)"
default BUSYBOX_DEFAULT_LOADFONT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
This program loads a console font from standard input.
config BUSYBOX_CONFIG_SETFONT
- bool "setfont"
+ bool "setfont (24 kb)"
default BUSYBOX_DEFAULT_SETFONT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
default BUSYBOX_DEFAULT_FEATURE_LOADFONT_RAW
depends on BUSYBOX_CONFIG_LOADFONT || BUSYBOX_CONFIG_SETFONT
config BUSYBOX_CONFIG_LOADKMAP
- bool "loadkmap"
+ bool "loadkmap (1.8 kb)"
default BUSYBOX_DEFAULT_LOADKMAP
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
This program loads a keyboard translation table from
standard input.
config BUSYBOX_CONFIG_OPENVT
- bool "openvt"
+ bool "openvt (7.2 kb)"
default BUSYBOX_DEFAULT_OPENVT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
This program is used to start a command on an unused
virtual terminal.
config BUSYBOX_CONFIG_RESET
- bool "reset"
+ bool "reset (345 bytes)"
default BUSYBOX_DEFAULT_RESET
help
This program is used to reset the terminal screen, if it
gets messed up.
config BUSYBOX_CONFIG_RESIZE
- bool "resize"
+ bool "resize (903 bytes)"
default BUSYBOX_DEFAULT_RESIZE
help
This program is used to (re)set the width and height of your current
E.g.:
COLUMNS=80;LINES=44;export COLUMNS LINES;
config BUSYBOX_CONFIG_SETCONSOLE
- bool "setconsole"
+ bool "setconsole (3.6 kb)"
default BUSYBOX_DEFAULT_SETCONSOLE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- This program redirects the system console to another device,
+ Redirect writes to /dev/console to another device,
like the current tty while logged in via telnet.
+ This does not redirect kernel log, only writes
+ from user space.
config BUSYBOX_CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS
bool "Enable long options"
default BUSYBOX_DEFAULT_FEATURE_SETCONSOLE_LONG_OPTIONS
depends on BUSYBOX_CONFIG_SETCONSOLE && BUSYBOX_CONFIG_LONG_OPTS
config BUSYBOX_CONFIG_SETKEYCODES
- bool "setkeycodes"
+ bool "setkeycodes (2.1 kb)"
default BUSYBOX_DEFAULT_SETKEYCODES
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
This program loads entries into the kernel's scancode-to-keycode
map, allowing unusual keyboards to generate usable keycodes.
config BUSYBOX_CONFIG_SETLOGCONS
- bool "setlogcons"
+ bool "setlogcons (1.8 kb)"
default BUSYBOX_DEFAULT_SETLOGCONS
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
This program redirects the output console of kernel messages.
config BUSYBOX_CONFIG_SHOWKEY
- bool "showkey"
+ bool "showkey (4.7 kb)"
default BUSYBOX_DEFAULT_SHOWKEY
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
+# see docs/Kconfig-language.txt.
#
menu "Coreutils"
config BUSYBOX_CONFIG_BASENAME
- bool "basename"
+ bool "basename (438 bytes)"
default BUSYBOX_DEFAULT_BASENAME
help
basename is used to strip the directory and suffix from filenames,
leaving just the filename itself. Enable this option if you wish
to enable the 'basename' utility.
config BUSYBOX_CONFIG_CAT
- bool "cat"
+ bool "cat (5.6 kb)"
default BUSYBOX_DEFAULT_CAT
help
cat is used to concatenate files and print them to the standard
output. Enable this option if you wish to enable the 'cat' utility.
+config BUSYBOX_CONFIG_FEATURE_CATN
+ bool "Enable -n and -b options"
+ default BUSYBOX_DEFAULT_FEATURE_CATN
+ depends on BUSYBOX_CONFIG_CAT
+ help
+ -n numbers all output lines while -b numbers nonempty output lines.
+
config BUSYBOX_CONFIG_FEATURE_CATV
bool "cat -v[etA]"
default BUSYBOX_DEFAULT_FEATURE_CATV
help
Display nonprinting characters as escape sequences
config BUSYBOX_CONFIG_CHGRP
- bool "chgrp"
+ bool "chgrp (7.6 kb)"
default BUSYBOX_DEFAULT_CHGRP
help
chgrp is used to change the group ownership of files.
config BUSYBOX_CONFIG_CHMOD
- bool "chmod"
+ bool "chmod (5.5 kb)"
default BUSYBOX_DEFAULT_CHMOD
help
chmod is used to change the access permission of files.
config BUSYBOX_CONFIG_CHOWN
- bool "chown"
+ bool "chown (7.6 kb)"
default BUSYBOX_DEFAULT_CHOWN
help
chown is used to change the user and/or group ownership
default BUSYBOX_DEFAULT_FEATURE_CHOWN_LONG_OPTIONS
depends on BUSYBOX_CONFIG_CHOWN && BUSYBOX_CONFIG_LONG_OPTS
config BUSYBOX_CONFIG_CHROOT
- bool "chroot"
+ bool "chroot (3.7 kb)"
default BUSYBOX_DEFAULT_CHROOT
help
chroot is used to change the root directory and run a command.
- The default command is `/bin/sh'.
+ The default command is '/bin/sh'.
config BUSYBOX_CONFIG_CKSUM
- bool "cksum"
+ bool "cksum (4.1 kb)"
default BUSYBOX_DEFAULT_CKSUM
help
cksum is used to calculate the CRC32 checksum of a file.
config BUSYBOX_CONFIG_COMM
- bool "comm"
+ bool "comm (4.2 kb)"
default BUSYBOX_DEFAULT_COMM
help
comm is used to compare two files line by line and return
a three-column output.
config BUSYBOX_CONFIG_CP
- bool "cp"
+ bool "cp (10 kb)"
default BUSYBOX_DEFAULT_CP
help
cp is used to copy files and directories.
help
Enable long options.
Also add support for --parents option.
+
+config BUSYBOX_CONFIG_FEATURE_CP_REFLINK
+ bool "Enable --reflink[=auto]"
+ default BUSYBOX_DEFAULT_FEATURE_CP_REFLINK
+ depends on BUSYBOX_CONFIG_FEATURE_CP_LONG_OPTIONS
config BUSYBOX_CONFIG_CUT
- bool "cut"
+ bool "cut (5.8 kb)"
default BUSYBOX_DEFAULT_CUT
help
cut is used to print selected parts of lines from
each file to stdout.
config BUSYBOX_CONFIG_DATE
- bool "date"
+ bool "date (7 kb)"
default BUSYBOX_DEFAULT_DATE
help
date is used to set the system date or display the
# defaults to "no": stat's nanosecond field is a bit non-portable
config BUSYBOX_CONFIG_FEATURE_DATE_NANO
bool "Support %[num]N nanosecond format specifier"
- default BUSYBOX_DEFAULT_FEATURE_DATE_NANO
- depends on BUSYBOX_CONFIG_DATE # syscall(__NR_clock_gettime)
+ default BUSYBOX_DEFAULT_FEATURE_DATE_NANO # syscall(__NR_clock_gettime)
+ depends on BUSYBOX_CONFIG_DATE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Support %[num]N format specifier. Adds ~250 bytes of code.
the same format. With it on, 'date DATE' additionally supports
MMDDhhmm[[YY]YY][.ss] format.
config BUSYBOX_CONFIG_DD
- bool "dd"
+ bool "dd (7.5 kb)"
default BUSYBOX_DEFAULT_DD
help
dd copies a file (from standard input to standard output,
default BUSYBOX_DEFAULT_FEATURE_DD_SIGNAL_HANDLING
depends on BUSYBOX_CONFIG_DD
help
- Sending a SIGUSR1 signal to a running `dd' process makes it
+ Sending a SIGUSR1 signal to a running 'dd' process makes it
print to standard error the number of records read and written
so far, then to resume copying.
elapsed time and speed.
config BUSYBOX_CONFIG_FEATURE_DD_IBS_OBS
- bool "Enable ibs, obs and conv options"
+ bool "Enable ibs, obs, iflag, oflag and conv options"
default BUSYBOX_DEFAULT_FEATURE_DD_IBS_OBS
depends on BUSYBOX_CONFIG_DD
help
help
Enable support for status=noxfer/none option.
config BUSYBOX_CONFIG_DF
- bool "df"
+ bool "df (6.8 kb)"
default BUSYBOX_DEFAULT_DF
help
df reports the amount of disk space used and available
-i Inodes
-B <SIZE> Blocksize
config BUSYBOX_CONFIG_DIRNAME
- bool "dirname"
+ bool "dirname (329 bytes)"
default BUSYBOX_DEFAULT_DIRNAME
help
dirname is used to strip a non-directory suffix from
a file name.
config BUSYBOX_CONFIG_DOS2UNIX
- bool "dos2unix"
+ bool "dos2unix (5.2 kb)"
default BUSYBOX_DEFAULT_DOS2UNIX
help
dos2unix is used to convert a text file from DOS format to
UNIX format, and vice versa.
config BUSYBOX_CONFIG_UNIX2DOS
- bool "unix2dos"
+ bool "unix2dos (5.2 kb)"
default BUSYBOX_DEFAULT_UNIX2DOS
help
unix2dos is used to convert a text file from UNIX format to
DOS format, and vice versa.
config BUSYBOX_CONFIG_DU
- bool "du (default blocksize of 512 bytes)"
+ bool "du (6.3 kb)"
default BUSYBOX_DEFAULT_DU
help
du is used to report the amount of disk space used
for specified files.
config BUSYBOX_CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K
- bool "Use a default blocksize of 1024 bytes (1K)"
+ bool "Use default blocksize of 1024 bytes (else it's 512 bytes)"
default BUSYBOX_DEFAULT_FEATURE_DU_DEFAULT_BLOCKSIZE_1K
depends on BUSYBOX_CONFIG_DU
- help
- Use a blocksize of (1K) instead of the default 512b.
config BUSYBOX_CONFIG_ECHO
- bool "echo (basic SuSv3 version taking no options)"
+ bool "echo (1.8 kb)"
default BUSYBOX_DEFAULT_ECHO
help
- echo is used to print a specified string to stdout.
+ echo prints a specified string to stdout.
# this entry also appears in shell/Config.in, next to the echo builtin
config BUSYBOX_CONFIG_FEATURE_FANCY_ECHO
default BUSYBOX_DEFAULT_FEATURE_FANCY_ECHO
depends on BUSYBOX_CONFIG_ECHO || BUSYBOX_CONFIG_ASH_ECHO || BUSYBOX_CONFIG_HUSH_ECHO
config BUSYBOX_CONFIG_ENV
- bool "env"
+ bool "env (4 kb)"
default BUSYBOX_DEFAULT_ENV
help
env is used to set an environment variable and run
a command; without options it displays the current
environment.
-
-config BUSYBOX_CONFIG_FEATURE_ENV_LONG_OPTIONS
- bool "Enable long options"
- default BUSYBOX_DEFAULT_FEATURE_ENV_LONG_OPTIONS
- depends on BUSYBOX_CONFIG_ENV && BUSYBOX_CONFIG_LONG_OPTS
config BUSYBOX_CONFIG_EXPAND
- bool "expand"
+ bool "expand (5.1 kb)"
default BUSYBOX_DEFAULT_EXPAND
help
By default, convert all tabs to spaces.
-config BUSYBOX_CONFIG_FEATURE_EXPAND_LONG_OPTIONS
- bool "Enable long options"
- default BUSYBOX_DEFAULT_FEATURE_EXPAND_LONG_OPTIONS
- depends on BUSYBOX_CONFIG_EXPAND && BUSYBOX_CONFIG_LONG_OPTS
-
config BUSYBOX_CONFIG_UNEXPAND
- bool "unexpand"
+ bool "unexpand (5.3 kb)"
default BUSYBOX_DEFAULT_UNEXPAND
help
By default, convert only leading sequences of blanks to tabs.
-
-config BUSYBOX_CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS
- bool "Enable long options"
- default BUSYBOX_DEFAULT_FEATURE_UNEXPAND_LONG_OPTIONS
- depends on BUSYBOX_CONFIG_UNEXPAND && BUSYBOX_CONFIG_LONG_OPTS
config BUSYBOX_CONFIG_EXPR
- bool "expr"
+ bool "expr (6.6 kb)"
default BUSYBOX_DEFAULT_EXPR
help
expr is used to calculate numbers and print the result
the applet slightly larger, but will allow computation with very
large numbers.
config BUSYBOX_CONFIG_FACTOR
- bool "factor"
+ bool "factor (2.7 kb)"
default BUSYBOX_DEFAULT_FACTOR
help
factor factorizes integers
config BUSYBOX_CONFIG_FALSE
- bool "false"
+ bool "false (tiny)"
default BUSYBOX_DEFAULT_FALSE
help
false returns an exit code of FALSE (1).
config BUSYBOX_CONFIG_FOLD
- bool "fold"
+ bool "fold (4.6 kb)"
default BUSYBOX_DEFAULT_FOLD
help
Wrap text to fit a specific width.
config BUSYBOX_CONFIG_FSYNC
- bool "fsync"
+ bool "fsync (3.6 kb)"
default BUSYBOX_DEFAULT_FSYNC
help
fsync is used to flush file-related cached blocks to disk.
config BUSYBOX_CONFIG_HEAD
- bool "head"
+ bool "head (3.8 kb)"
default BUSYBOX_DEFAULT_HEAD
help
head is used to print the first specified number of lines
default BUSYBOX_DEFAULT_FEATURE_FANCY_HEAD
depends on BUSYBOX_CONFIG_HEAD
config BUSYBOX_CONFIG_HOSTID
- bool "hostid"
+ bool "hostid (286 bytes)"
default BUSYBOX_DEFAULT_HOSTID
help
hostid prints the numeric identifier (in hexadecimal) for
the current host.
config BUSYBOX_CONFIG_ID
- bool "id"
+ bool "id (7 kb)"
default BUSYBOX_DEFAULT_ID
help
id displays the current user and group ID names.
config BUSYBOX_CONFIG_GROUPS
- bool "groups"
+ bool "groups (6.7 kb)"
default BUSYBOX_DEFAULT_GROUPS
help
Print the group names associated with current user id.
config BUSYBOX_CONFIG_INSTALL
- bool "install"
+ bool "install (12 kb)"
default BUSYBOX_DEFAULT_INSTALL
help
Copy files and set attributes.
default BUSYBOX_DEFAULT_FEATURE_INSTALL_LONG_OPTIONS
depends on BUSYBOX_CONFIG_INSTALL && BUSYBOX_CONFIG_LONG_OPTS
config BUSYBOX_CONFIG_LINK
- bool "link"
+ bool "link (3.2 kb)"
default BUSYBOX_DEFAULT_LINK
help
link creates hard links between files.
config BUSYBOX_CONFIG_LN
- bool "ln"
+ bool "ln (4.9 kb)"
default BUSYBOX_DEFAULT_LN
help
ln is used to create hard or soft links between files.
config BUSYBOX_CONFIG_LOGNAME
- bool "logname"
+ bool "logname (1.1 kb)"
default BUSYBOX_DEFAULT_LOGNAME
help
logname is used to print the current user's login name.
config BUSYBOX_CONFIG_LS
- bool "ls"
+ bool "ls (14 kb)"
default BUSYBOX_DEFAULT_LS
help
ls is used to list the contents of directories.
configurable, and the output may not be legible on
many output screens.
config BUSYBOX_CONFIG_MD5SUM
- bool "md5sum"
+ bool "md5sum (6.5 kb)"
default BUSYBOX_DEFAULT_MD5SUM
help
- md5sum is used to print or check MD5 checksums.
+ Compute and check MD5 message digest
config BUSYBOX_CONFIG_SHA1SUM
- bool "sha1sum"
+ bool "sha1sum (5.9 kb)"
default BUSYBOX_DEFAULT_SHA1SUM
help
Compute and check SHA1 message digest
config BUSYBOX_CONFIG_SHA256SUM
- bool "sha256sum"
+ bool "sha256sum (7 kb)"
default BUSYBOX_DEFAULT_SHA256SUM
help
Compute and check SHA256 message digest
config BUSYBOX_CONFIG_SHA512SUM
- bool "sha512sum"
+ bool "sha512sum (7.4 kb)"
default BUSYBOX_DEFAULT_SHA512SUM
help
Compute and check SHA512 message digest
config BUSYBOX_CONFIG_SHA3SUM
- bool "sha3sum"
+ bool "sha3sum (6.1 kb)"
default BUSYBOX_DEFAULT_SHA3SUM
help
Compute and check SHA3 message digest
against pre-calculated hash values.
-s and -w are useful options when verifying checksums.
config BUSYBOX_CONFIG_MKDIR
- bool "mkdir"
+ bool "mkdir (4.5 kb)"
default BUSYBOX_DEFAULT_MKDIR
help
mkdir is used to create directories with the specified names.
-
-config BUSYBOX_CONFIG_FEATURE_MKDIR_LONG_OPTIONS
- bool "Enable long options"
- default BUSYBOX_DEFAULT_FEATURE_MKDIR_LONG_OPTIONS
- depends on BUSYBOX_CONFIG_MKDIR && BUSYBOX_CONFIG_LONG_OPTS
config BUSYBOX_CONFIG_MKFIFO
- bool "mkfifo"
+ bool "mkfifo (3.8 kb)"
default BUSYBOX_DEFAULT_MKFIFO
help
mkfifo is used to create FIFOs (named pipes).
The 'mknod' program can also create FIFOs.
config BUSYBOX_CONFIG_MKNOD
- bool "mknod"
+ bool "mknod (4.5 kb)"
default BUSYBOX_DEFAULT_MKNOD
help
mknod is used to create FIFOs or block/character special
files with the specified names.
config BUSYBOX_CONFIG_MKTEMP
- bool "mktemp"
+ bool "mktemp (4.2 kb)"
default BUSYBOX_DEFAULT_MKTEMP
help
mktemp is used to create unique temporary files
config BUSYBOX_CONFIG_MV
- bool "mv"
+ bool "mv (10 kb)"
default BUSYBOX_DEFAULT_MV
help
mv is used to move or rename files or directories.
-
-config BUSYBOX_CONFIG_FEATURE_MV_LONG_OPTIONS
- bool "Enable long options"
- default BUSYBOX_DEFAULT_FEATURE_MV_LONG_OPTIONS
- depends on BUSYBOX_CONFIG_MV && BUSYBOX_CONFIG_LONG_OPTS
config BUSYBOX_CONFIG_NICE
- bool "nice"
+ bool "nice (2.1 kb)"
default BUSYBOX_DEFAULT_NICE
help
nice runs a program with modified scheduling priority.
config BUSYBOX_CONFIG_NL
- bool "nl"
+ bool "nl (4.6 kb)"
default BUSYBOX_DEFAULT_NL
help
nl is used to number lines of files.
config BUSYBOX_CONFIG_NOHUP
- bool "nohup"
+ bool "nohup (2 kb)"
default BUSYBOX_DEFAULT_NOHUP
help
run a command immune to hangups, with output to a non-tty.
config BUSYBOX_CONFIG_NPROC
- bool "nproc"
+ bool "nproc (3.7 kb)"
default BUSYBOX_DEFAULT_NPROC
help
Print number of CPUs
config BUSYBOX_CONFIG_OD
- bool "od"
+ bool "od (11 kb)"
default BUSYBOX_DEFAULT_OD
help
od is used to dump binary files in octal and other formats.
config BUSYBOX_CONFIG_PASTE
- bool "paste"
+ bool "paste (4.9 kb)"
default BUSYBOX_DEFAULT_PASTE
help
paste is used to paste lines of different files together
and write the result to stdout
config BUSYBOX_CONFIG_PRINTENV
- bool "printenv"
+ bool "printenv (1.3 kb)"
default BUSYBOX_DEFAULT_PRINTENV
help
printenv is used to print all or part of environment.
config BUSYBOX_CONFIG_PRINTF
- bool "printf"
+ bool "printf (3.8 kb)"
default BUSYBOX_DEFAULT_PRINTF
help
printf is used to format and print specified strings.
- It's similar to `echo' except it has more options.
+ It's similar to 'echo' except it has more options.
config BUSYBOX_CONFIG_PWD
- bool "pwd"
+ bool "pwd (3.7 kb)"
default BUSYBOX_DEFAULT_PWD
help
pwd is used to print the current directory.
config BUSYBOX_CONFIG_READLINK
- bool "readlink"
+ bool "readlink (4 kb)"
default BUSYBOX_DEFAULT_READLINK
help
This program reads a symbolic link and returns the name
help
Enable the readlink option (-f).
config BUSYBOX_CONFIG_REALPATH
- bool "realpath"
+ bool "realpath (1.6 kb)"
default BUSYBOX_DEFAULT_REALPATH
help
Return the canonicalized absolute pathname.
This isn't provided by GNU shellutils, but where else does it belong.
config BUSYBOX_CONFIG_RM
- bool "rm"
+ bool "rm (5.4 kb)"
default BUSYBOX_DEFAULT_RM
help
rm is used to remove files or directories.
config BUSYBOX_CONFIG_RMDIR
- bool "rmdir"
+ bool "rmdir (3.5 kb)"
default BUSYBOX_DEFAULT_RMDIR
help
rmdir is used to remove empty directories.
-
-config BUSYBOX_CONFIG_FEATURE_RMDIR_LONG_OPTIONS
- bool "Enable long options"
- default BUSYBOX_DEFAULT_FEATURE_RMDIR_LONG_OPTIONS
- depends on BUSYBOX_CONFIG_RMDIR && BUSYBOX_CONFIG_LONG_OPTS
- help
- Support long options for the rmdir applet, including
- --ignore-fail-on-non-empty for compatibility with GNU rmdir.
config BUSYBOX_CONFIG_SEQ
- bool "seq"
+ bool "seq (3.8 kb)"
default BUSYBOX_DEFAULT_SEQ
help
print a sequence of numbers
config BUSYBOX_CONFIG_SHRED
- bool "shred"
+ bool "shred (4.9 kb)"
default BUSYBOX_DEFAULT_SHRED
help
Overwrite a file to hide its contents, and optionally delete it
config BUSYBOX_CONFIG_SHUF
- bool "shuf"
+ bool "shuf (5.4 kb)"
default BUSYBOX_DEFAULT_SHUF
help
Generate random permutations
config BUSYBOX_CONFIG_SLEEP
- bool "sleep"
+ bool "sleep (2 kb)"
default BUSYBOX_DEFAULT_SLEEP
help
sleep is used to pause for a specified number of seconds.
It comes in 3 versions:
- small: takes one integer parameter
- fancy: takes multiple integer arguments with suffixes:
- sleep 1d 2h 3m 15s
+ sleep 1d 2h 3m 15s
- fancy with fractional numbers:
- sleep 2.3s 4.5h sleeps for 16202.3 seconds
+ sleep 2.3s 4.5h sleeps for 16202.3 seconds
Last one is "the most compatible" with coreutils sleep,
but it adds around 1k of code.
depends on BUSYBOX_CONFIG_SLEEP
help
Allow sleep to pause for specified minutes, hours, and days.
-
-config BUSYBOX_CONFIG_FEATURE_FLOAT_SLEEP
- bool "Enable fractional arguments"
- default BUSYBOX_DEFAULT_FEATURE_FLOAT_SLEEP
- depends on BUSYBOX_CONFIG_FEATURE_FANCY_SLEEP
- help
- Allow for fractional numeric parameters.
config BUSYBOX_CONFIG_SORT
- bool "sort"
+ bool "sort (7.7 kb)"
default BUSYBOX_DEFAULT_SORT
help
sort is used to sort lines of text in specified files.
config BUSYBOX_CONFIG_FEATURE_SORT_BIG
- bool "Full SuSv3 compliant sort (support -ktcsbdfiozgM)"
+ bool "Full SuSv3 compliant sort (support -ktcbdfiogM)"
default BUSYBOX_DEFAULT_FEATURE_SORT_BIG
depends on BUSYBOX_CONFIG_SORT
help
- Without this, sort only supports -r, -u, and an integer version
+ Without this, sort only supports -rusz, and an integer version
of -n. Selecting this adds sort keys, floating point support, and
more. This adds a little over 3k to a nonstatic build on x86.
The SuSv3 sort standard is available at:
http://www.opengroup.org/onlinepubs/007904975/utilities/sort.html
+
+config BUSYBOX_CONFIG_FEATURE_SORT_OPTIMIZE_MEMORY
+ bool "Use less memory (but might be slower)"
+ default BUSYBOX_DEFAULT_FEATURE_SORT_OPTIMIZE_MEMORY # defaults to N since we are size-paranoid tribe
+ depends on BUSYBOX_CONFIG_SORT
+ help
+ Attempt to use less memory (by storing only one copy
+ of duplicated lines, and such). Useful if you work on huge files.
config BUSYBOX_CONFIG_SPLIT
- bool "split"
+ bool "split (5 kb)"
default BUSYBOX_DEFAULT_SPLIT
help
Split a file into pieces.
Supports additional suffixes 'b' for 512 bytes,
'g' for 1GiB for the -b option.
config BUSYBOX_CONFIG_STAT
- bool "stat"
+ bool "stat (11 kb)"
default BUSYBOX_DEFAULT_STAT
help
display file or filesystem status.
Without this, stat will not support the '-f' option to display
information about filesystem status.
config BUSYBOX_CONFIG_STTY
- bool "stty"
+ bool "stty (8.9 kb)"
default BUSYBOX_DEFAULT_STTY
help
stty is used to change and print terminal line settings.
config BUSYBOX_CONFIG_SUM
- bool "sum"
+ bool "sum (4 kb)"
default BUSYBOX_DEFAULT_SUM
help
checksum and count the blocks in a file
config BUSYBOX_CONFIG_SYNC
- bool "sync"
+ bool "sync (3.8 kb)"
default BUSYBOX_DEFAULT_SYNC
help
sync is used to flush filesystem buffers.
sync -d FILE... executes fdatasync() on each FILE.
sync -f FILE... executes syncfs() on each FILE.
config BUSYBOX_CONFIG_TAC
- bool "tac"
+ bool "tac (3.9 kb)"
default BUSYBOX_DEFAULT_TAC
help
tac is used to concatenate and print files in reverse.
config BUSYBOX_CONFIG_TAIL
- bool "tail"
+ bool "tail (6.8 kb)"
default BUSYBOX_DEFAULT_TAIL
help
tail is used to print the last specified number of lines
depends on BUSYBOX_CONFIG_TAIL
help
These options are provided by GNU tail, but
- are not specific in the SUSv3 standard:
- -q Never output headers giving file names
- -s SEC Wait SEC seconds between reads with -f
- -v Always output headers giving file names
- -F Same as -f, but keep retrying
+ are not specified in the SUSv3 standard:
+ -q Never output headers giving file names
+ -s SEC Wait SEC seconds between reads with -f
+ -v Always output headers giving file names
+ -F Same as -f, but keep retrying
config BUSYBOX_CONFIG_TEE
- bool "tee"
+ bool "tee (4.2 kb)"
default BUSYBOX_DEFAULT_TEE
help
tee is used to read from standard input and write
help
Enable this option for a faster tee, at expense of size.
config BUSYBOX_CONFIG_TEST
- bool "test"
+ bool "test (4.1 kb)"
default BUSYBOX_DEFAULT_TEST
help
test is used to check file types and compare values,
help
Enable 64-bit support in test.
config BUSYBOX_CONFIG_TIMEOUT
- bool "timeout"
+ bool "timeout (6 kb)"
default BUSYBOX_DEFAULT_TIMEOUT
help
Runs a program and watches it. If it does not terminate in
specified number of seconds, it is sent a signal.
config BUSYBOX_CONFIG_TOUCH
- bool "touch"
+ bool "touch (5.9 kb)"
default BUSYBOX_DEFAULT_TOUCH
help
touch is used to create or change the access and/or
help
Enable touch to use a reference file or a given date/time argument.
config BUSYBOX_CONFIG_TR
- bool "tr"
+ bool "tr (5.1 kb)"
default BUSYBOX_DEFAULT_TR
help
tr is used to squeeze, and/or delete characters from standard
useful for cases when no other way of expressing a character
is possible.
config BUSYBOX_CONFIG_TRUE
- bool "true"
+ bool "true (tiny)"
default BUSYBOX_DEFAULT_TRUE
help
true returns an exit code of TRUE (0).
config BUSYBOX_CONFIG_TRUNCATE
- bool "truncate"
+ bool "truncate (4.2 kb)"
default BUSYBOX_DEFAULT_TRUNCATE
help
truncate truncates files to a given size. If a file does
not exist, it is created unless told otherwise.
config BUSYBOX_CONFIG_TTY
- bool "tty"
+ bool "tty (3.6 kb)"
default BUSYBOX_DEFAULT_TTY
help
tty is used to print the name of the current terminal to
standard output.
config BUSYBOX_CONFIG_UNAME
- bool "uname"
+ bool "uname (3.9 kb)"
default BUSYBOX_DEFAULT_UNAME
help
uname is used to print system information.
help
Sets the operating system name reported by uname -o. The
default BUSYBOX_DEFAULT_UNAME_OSNAME "GNU/Linux".
+
+config BUSYBOX_CONFIG_BB_ARCH
+ bool "arch (1.1 kb)"
+ default BUSYBOX_DEFAULT_BB_ARCH
+ help
+ Same as uname -m.
config BUSYBOX_CONFIG_UNIQ
- bool "uniq"
+ bool "uniq (4.9 kb)"
default BUSYBOX_DEFAULT_UNIQ
help
uniq is used to remove duplicate lines from a sorted file.
config BUSYBOX_CONFIG_UNLINK
- bool "unlink"
+ bool "unlink (3.2 kb)"
default BUSYBOX_DEFAULT_UNLINK
help
unlink deletes a file by calling unlink()
config BUSYBOX_CONFIG_USLEEP
- bool "usleep"
+ bool "usleep (1.3 kb)"
default BUSYBOX_DEFAULT_USLEEP
help
usleep is used to pause for a specified number of microseconds.
config BUSYBOX_CONFIG_UUDECODE
- bool "uudecode"
+ bool "uudecode (5.8 kb)"
default BUSYBOX_DEFAULT_UUDECODE
help
uudecode is used to decode a uuencoded file.
config BUSYBOX_CONFIG_BASE64
- bool "base64"
+ bool "base64 (4.9 kb)"
default BUSYBOX_DEFAULT_BASE64
help
Base64 encode and decode
config BUSYBOX_CONFIG_UUENCODE
- bool "uuencode"
+ bool "uuencode (4.4 kb)"
default BUSYBOX_DEFAULT_UUENCODE
help
uuencode is used to uuencode a file.
config BUSYBOX_CONFIG_WC
- bool "wc"
+ bool "wc (4.5 kb)"
default BUSYBOX_DEFAULT_WC
help
wc is used to print the number of bytes, words, and lines,
help
Use "unsigned long long" for counter variables.
config BUSYBOX_CONFIG_WHO
- bool "who"
- default BUSYBOX_DEFAULT_WHO
- depends on BUSYBOX_CONFIG_FEATURE_UTMP
- help
- who is used to show who is logged on.
+ bool "who (3.9 kb)"
+ default BUSYBOX_DEFAULT_WHO
+ depends on BUSYBOX_CONFIG_FEATURE_UTMP
+ help
+ Print users currently logged on.
config BUSYBOX_CONFIG_W
- bool "w"
- default BUSYBOX_DEFAULT_W
- depends on BUSYBOX_CONFIG_FEATURE_UTMP
- help
- w is used to show who is logged on.
+ bool "w (3.8 kb)"
+ default BUSYBOX_DEFAULT_W
+ depends on BUSYBOX_CONFIG_FEATURE_UTMP
+ help
+ Print users currently logged on.
config BUSYBOX_CONFIG_USERS
- bool "users"
- default BUSYBOX_DEFAULT_USERS
- depends on BUSYBOX_CONFIG_FEATURE_UTMP
- help
- Print users currently logged on.
+ bool "users (3.4 kb)"
+ default BUSYBOX_DEFAULT_USERS
+ depends on BUSYBOX_CONFIG_FEATURE_UTMP
+ help
+ Print users currently logged on.
config BUSYBOX_CONFIG_WHOAMI
- bool "whoami"
+ bool "whoami (3.2 kb)"
default BUSYBOX_DEFAULT_WHOAMI
help
whoami is used to print the username of the current
user id (same as id -un).
config BUSYBOX_CONFIG_YES
- bool "yes"
+ bool "yes (1.2 kb)"
default BUSYBOX_DEFAULT_YES
help
yes is used to repeatedly output a specific string, or
- the default string `y'.
+ the default string 'y'.
comment "Common options"
# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
+# see docs/Kconfig-language.txt.
#
menu "Debian Utilities"
config BUSYBOX_CONFIG_PIPE_PROGRESS
- bool "pipe_progress"
+ bool "pipe_progress (275 bytes)"
default BUSYBOX_DEFAULT_PIPE_PROGRESS
help
Display a dot to indicate pipe activity.
config BUSYBOX_CONFIG_RUN_PARTS
- bool "run-parts"
+ bool "run-parts (6.1 kb)"
default BUSYBOX_DEFAULT_RUN_PARTS
help
run-parts is a utility designed to run all the scripts in a directory.
help
Support additional options:
-l --list print the names of the all matching files (not
- limited to executables), but don't actually run them.
+ limited to executables), but don't actually run them.
config BUSYBOX_CONFIG_START_STOP_DAEMON
- bool "start-stop-daemon"
+ bool "start-stop-daemon (12 kb)"
default BUSYBOX_DEFAULT_START_STOP_DAEMON
help
start-stop-daemon is used to control the creation and
-v|--verbose
-N|--nicelevel N
config BUSYBOX_CONFIG_WHICH
- bool "which"
+ bool "which (3.8 kb)"
default BUSYBOX_DEFAULT_WHICH
help
which is used to find programs in your PATH and
# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
+# see docs/Kconfig-language.txt.
#
menu "Linux Ext2 FS Progs"
config BUSYBOX_CONFIG_CHATTR
- bool "chattr"
+ bool "chattr (3.8 kb)"
default BUSYBOX_DEFAULT_CHATTR
help
chattr changes the file attributes on a second extended file system.
config BUSYBOX_CONFIG_FSCK
- bool "fsck"
+ bool "fsck (7.4 kb)"
default BUSYBOX_DEFAULT_FSCK
help
fsck is used to check and optionally repair one or more filesystems.
In actuality, fsck is simply a front-end for the various file system
checkers (fsck.fstype) available under Linux.
config BUSYBOX_CONFIG_LSATTR
- bool "lsattr"
+ bool "lsattr (5.5 kb)"
default BUSYBOX_DEFAULT_LSATTR
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
lsattr lists the file attributes on a second extended file system.
config BUSYBOX_CONFIG_TUNE2FS
- bool "tune2fs"
+ bool "tune2fs (4.4 kb)"
default BUSYBOX_DEFAULT_TUNE2FS # off: it is too limited compared to upstream version
help
tune2fs allows the system administrator to adjust various tunable
# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
+# see docs/Kconfig-language.txt.
#
menu "Editors"
config BUSYBOX_CONFIG_AWK
- bool "awk"
+ bool "awk (23 kb)"
default BUSYBOX_DEFAULT_AWK
help
- Awk is used as a pattern scanning and processing language. This is
- the BusyBox implementation of that programming language.
+ Awk is used as a pattern scanning and processing language.
config BUSYBOX_CONFIG_FEATURE_AWK_LIBM
bool "Enable math functions (requires libm)"
depends on BUSYBOX_CONFIG_AWK
help
Enable math functions of the Awk programming language.
- NOTE: This will require libm to be present for linking.
+ NOTE: This requires libm to be present for linking.
config BUSYBOX_CONFIG_FEATURE_AWK_GNU_EXTENSIONS
bool "Enable a few GNU extensions"
Enable a few features from gawk:
* command line option -e AWK_PROGRAM
* simultaneous use of -f and -e on the command line.
- This enables the use of awk library files.
- Ex: awk -f mylib.awk -e '{print myfunction($1);}' ...
+ This enables the use of awk library files.
+ Example: awk -f mylib.awk -e '{print myfunction($1);}' ...
config BUSYBOX_CONFIG_CMP
- bool "cmp"
+ bool "cmp (4.9 kb)"
default BUSYBOX_DEFAULT_CMP
help
cmp is used to compare two files and returns the result
to standard output.
config BUSYBOX_CONFIG_DIFF
- bool "diff"
+ bool "diff (13 kb)"
default BUSYBOX_DEFAULT_DIFF
help
diff compares two files or directories and outputs the
This option enables support for directory and subdirectory
comparison.
config BUSYBOX_CONFIG_ED
- bool "ed"
+ bool "ed (21 kb)"
default BUSYBOX_DEFAULT_ED
help
The original 1970's Unix text editor, from the days of teletypes.
Small, simple, evil. Part of SUSv3. If you're not already using
this, you don't need it.
config BUSYBOX_CONFIG_PATCH
- bool "patch"
+ bool "patch (9.4 kb)"
default BUSYBOX_DEFAULT_PATCH
help
Apply a unified diff formatted patch.
config BUSYBOX_CONFIG_SED
- bool "sed"
+ bool "sed (12 kb)"
default BUSYBOX_DEFAULT_SED
help
sed is used to perform text transformations on a file
or input from a pipeline.
config BUSYBOX_CONFIG_VI
- bool "vi"
+ bool "vi (23 kb)"
default BUSYBOX_DEFAULT_VI
help
'vi' is a text editor. More specifically, it is the One True
default BUSYBOX_DEFAULT_FEATURE_VI_YANKMARK
depends on BUSYBOX_CONFIG_VI
help
- This will enable you to use yank and put, as well as mark.
+ This enables you to use yank and put, as well as mark.
config BUSYBOX_CONFIG_FEATURE_VI_SEARCH
bool "Enable search and replace cmds"
# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
+# see docs/Kconfig-language.txt.
#
menu "Finding Utilities"
config BUSYBOX_CONFIG_FIND
- bool "find"
+ bool "find (14 kb)"
default BUSYBOX_DEFAULT_FIND
help
find is used to search your system to find specified files.
Enable searching based on file type (file,
directory, socket, device, etc.).
+config BUSYBOX_CONFIG_FEATURE_FIND_EXECUTABLE
+ bool "Enable -executable: file is executable"
+ default BUSYBOX_DEFAULT_FEATURE_FIND_EXECUTABLE
+ depends on BUSYBOX_CONFIG_FIND
+
config BUSYBOX_CONFIG_FEATURE_FIND_XDEV
bool "Enable -xdev: 'stay in filesystem'"
default BUSYBOX_DEFAULT_FEATURE_FIND_XDEV
If the file is a directory, don't descend into it. Useful for
exclusion .svn and CVS directories.
+config BUSYBOX_CONFIG_FEATURE_FIND_QUIT
+ bool "Enable -quit: exit"
+ default BUSYBOX_DEFAULT_FEATURE_FIND_QUIT
+ depends on BUSYBOX_CONFIG_FIND
+ help
+ If this action is reached, 'find' exits.
+
config BUSYBOX_CONFIG_FEATURE_FIND_DELETE
bool "Enable -delete: delete files/dirs"
default BUSYBOX_DEFAULT_FEATURE_FIND_DELETE
help
Support the 'find -links' option for matching number of links.
config BUSYBOX_CONFIG_GREP
- bool "grep"
+ bool "grep (8.6 kb)"
default BUSYBOX_DEFAULT_GREP
help
grep is used to search files for a specified pattern.
config BUSYBOX_CONFIG_EGREP
- bool "egrep"
+ bool "egrep (7.8 kb)"
default BUSYBOX_DEFAULT_EGREP
help
- Alias to "grep -E"
+ Alias to "grep -E".
config BUSYBOX_CONFIG_FGREP
- bool "fgrep"
+ bool "fgrep (7.8 kb)"
default BUSYBOX_DEFAULT_FGREP
help
- Alias to "grep -F"
+ Alias to "grep -F".
config BUSYBOX_CONFIG_FEATURE_GREP_CONTEXT
bool "Enable before and after context flags (-A, -B and -C)"
context surrounding our matching lines.
Print the specified number of context lines (-C).
config BUSYBOX_CONFIG_XARGS
- bool "xargs"
+ bool "xargs (7.2 kb)"
default BUSYBOX_DEFAULT_XARGS
help
xargs is used to execute a specified command for
help
Support -I STR and -i[STR] options.
+config BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_PARALLEL
+ bool "Enable -P N: processes to run in parallel"
+ default BUSYBOX_DEFAULT_FEATURE_XARGS_SUPPORT_PARALLEL
+ depends on BUSYBOX_CONFIG_XARGS
+
+config BUSYBOX_CONFIG_FEATURE_XARGS_SUPPORT_ARGS_FILE
+ bool "Enable -a FILE: use FILE instead of stdin"
+ default BUSYBOX_DEFAULT_FEATURE_XARGS_SUPPORT_ARGS_FILE
+ depends on BUSYBOX_CONFIG_XARGS
+
endmenu
# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
+# see docs/Kconfig-language.txt.
#
menu "Init Utilities"
config BUSYBOX_CONFIG_BOOTCHARTD
- bool "bootchartd"
+ bool "bootchartd (10 kb)"
default BUSYBOX_DEFAULT_BOOTCHARTD
help
bootchartd is commonly used to profile the boot process
help
Create extended header file compatible with "big" bootchartd.
"Big" bootchartd is a shell script and it dumps some
- "convenient" info int the header, such as:
- title = Boot chart for `hostname` (`date`)
- system.uname = `uname -srvm`
- system.release = `cat /etc/DISTRO-release`
- system.cpu = `grep '^model name' /proc/cpuinfo | head -1` ($cpucount)
- system.kernel.options = `cat /proc/cmdline`
+ "convenient" info into the header, such as:
+ title = Boot chart for `hostname` (`date`)
+ system.uname = `uname -srvm`
+ system.release = `cat /etc/DISTRO-release`
+ system.cpu = `grep '^model name' /proc/cpuinfo | head -1` ($cpucount)
+ system.kernel.options = `cat /proc/cmdline`
This data is not mandatory for bootchart graph generation,
and is considered bloat. Nevertheless, this option
makes bootchartd applet to dump a subset of it.
Enable reading and parsing of $PWD/bootchartd.conf
and /etc/bootchartd.conf files.
config BUSYBOX_CONFIG_HALT
- bool "halt"
+ bool "halt (4 kb)"
default BUSYBOX_DEFAULT_HALT
help
Stop all processes and halt the system.
config BUSYBOX_CONFIG_POWEROFF
- bool "poweroff"
+ bool "poweroff (4 kb)"
default BUSYBOX_DEFAULT_POWEROFF
help
Stop all processes and power off the system.
config BUSYBOX_CONFIG_REBOOT
- bool "reboot"
+ bool "reboot (4 kb)"
default BUSYBOX_DEFAULT_REBOOT
help
Stop all processes and reboot the system.
+config BUSYBOX_CONFIG_FEATURE_WAIT_FOR_INIT
+ bool "Before signaling init, make sure it is ready for it"
+ default BUSYBOX_DEFAULT_FEATURE_WAIT_FOR_INIT
+ depends on BUSYBOX_CONFIG_HALT || BUSYBOX_CONFIG_POWEROFF || BUSYBOX_CONFIG_REBOOT
+ help
+ In rare cases, poweroff may be commanded by firmware to OS
+ even before init process exists. On Linux, this spawns
+ "/sbin/poweroff" very early. This option adds code
+ which checks that init is ready to receive poweroff
+ commands. Code size increase of ~80 bytes.
+
config BUSYBOX_CONFIG_FEATURE_CALL_TELINIT
bool "Call telinit on shutdown and reboot"
default BUSYBOX_DEFAULT_FEATURE_CALL_TELINIT
to facilitate proper shutdown, this path is to be used when
locating telinit executable.
config BUSYBOX_CONFIG_INIT
- bool "init"
+ bool "init (10 kb)"
default BUSYBOX_DEFAULT_INIT
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
--- /dev/null
+# DO NOT EDIT. This file is generated from Config.src
+#
+# For a description of the syntax of this configuration file,
+# see docs/Kconfig-language.txt.
+#
+
+menu "klibc-utils"
+
+config BUSYBOX_CONFIG_MINIPS
+ bool "minips (11 kb)"
+ default BUSYBOX_DEFAULT_MINIPS # for god's sake, just use "ps" name in your scripts
+ help
+ Alias to "ps".
+config BUSYBOX_CONFIG_NUKE
+ bool "nuke (2.9 kb)"
+ default BUSYBOX_DEFAULT_NUKE
+ help
+ Alias to "rm -rf".
+config BUSYBOX_CONFIG_RESUME
+ bool "resume (3.2 kb)"
+ default BUSYBOX_DEFAULT_RESUME
+ help
+ Resume from saved "suspend-to-disk" image
+config BUSYBOX_CONFIG_RUN_INIT
+ bool "run-init (7.7 kb)"
+ default BUSYBOX_DEFAULT_RUN_INIT
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
+ help
+ The run-init utility is used from initramfs to select a new
+ root device. Under initramfs, you have to use this instead of
+ pivot_root.
+
+ Booting with initramfs extracts a gzipped cpio archive into rootfs
+ (which is a variant of ramfs/tmpfs). Because rootfs can't be moved
+ or unmounted, pivot_root will not work from initramfs. Instead,
+ run-init deletes everything out of rootfs (including itself),
+ does a mount --move that overmounts rootfs with the new root, and
+ then execs the specified init program.
+
+ util-linux has a similar tool, switch-root.
+ run-init differs by also having a "-d CAPS_TO_DROP" option.
+
+endmenu
# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
+# see docs/Kconfig-language.txt.
#
-menu "Busybox Library Tuning"
+comment "Library Tuning"
config BUSYBOX_CONFIG_FEATURE_USE_BSS_TAIL
bool "Use the end of BSS page"
At link time, "text" is padded to a full page. At runtime, all "text"
pages are mapped RO and executable.
+
"Data" starts on the next page boundary, but is not padded
to a full page at the end. "Bss" starts wherever "data" ends.
At runtime, "data" pages are mapped RW and they are file-backed
is known only after final link.
If you are getting a build error like this:
- appletlib.c:(.text.main+0xd): undefined reference to '_end'
+ appletlib.c:(.text.main+0xd): undefined reference to '_end'
disable this option.
+config BUSYBOX_CONFIG_FLOAT_DURATION
+ bool "Enable fractional duration arguments"
+ default BUSYBOX_DEFAULT_FLOAT_DURATION
+ help
+ Allow sleep N.NNN, top -d N.NNN etc.
config BUSYBOX_CONFIG_FEATURE_RTMINMAX
bool "Support RTMIN[+n] and RTMAX[-n] signal names"
default BUSYBOX_DEFAULT_FEATURE_RTMINMAX
Support RTMIN[+n] and RTMAX[-n] signal names
in kill, killall etc. This costs ~250 bytes.
+config BUSYBOX_CONFIG_FEATURE_RTMINMAX_USE_LIBC_DEFINITIONS
+ bool "Use the definitions of SIGRTMIN/SIGRTMAX provided by libc"
+ default BUSYBOX_DEFAULT_FEATURE_RTMINMAX_USE_LIBC_DEFINITIONS
+ depends on BUSYBOX_CONFIG_FEATURE_RTMINMAX
+ help
+ Some C libraries reserve a few real-time signals for internal
+ use, and adjust the values of SIGRTMIN/SIGRTMAX seen by
+ applications accordingly. Saying yes here means that a signal
+ name RTMIN+n will be interpreted according to the libc definition
+ of SIGRTMIN, and not the raw definition provided by the kernel.
+ This behavior matches "kill -l RTMIN+n" from bash.
+
choice
prompt "Buffer allocation policy"
default BUSYBOX_CONFIG_FEATURE_BUFFERS_GO_ON_STACK
help
- There are 3 ways BusyBox can handle buffer allocations:
+ There are 3 ways busybox can handle buffer allocations:
- Use malloc. This costs code size for the call to xmalloc.
- Put them on stack. For some very small machines with limited stack
- space, this can be deadly. For most folks, this works just fine.
+ space, this can be deadly. For most folks, this works just fine.
- Put them in BSS. This works beautifully for computers with a real
- MMU (and OS support), but wastes runtime RAM for uCLinux. This
- behavior was the only one available for BusyBox versions 0.48 and
- earlier.
+ MMU (and OS support), but wastes runtime RAM for uCLinux. This
+ behavior was the only one available for versions 0.48 and earlier.
config BUSYBOX_CONFIG_FEATURE_BUFFERS_USE_MALLOC
bool "Allocate with Malloc"
Trade binary size versus speed for the md5sum algorithm.
Approximate values running uClibc and hashing
linux-2.4.4.tar.bz2 were:
- user times (sec) text size (386)
+ value user times (sec) text size (386)
0 (fastest) 1.1 6144
1 1.4 5392
2 3.0 5088
bool "Faster /proc scanning code (+100 bytes)"
default BUSYBOX_DEFAULT_FEATURE_FAST_TOP # all "fast or small" options default to small
help
- This option makes top (and ps) ~20% faster (or 20% less CPU hungry),
+ This option makes top and ps ~20% faster (or 20% less CPU hungry),
but code size is slightly bigger.
config BUSYBOX_CONFIG_FEATURE_ETC_NETWORKS
a rarely used feature which allows you to use names
instead of IP/mask pairs in route command.
+config BUSYBOX_CONFIG_FEATURE_ETC_SERVICES
+ bool "Consult /etc/services even for well-known ports"
+ default BUSYBOX_DEFAULT_FEATURE_ETC_SERVICES
+ help
+ Look up e.g. "telnet" and "http" in /etc/services file
+ instead of assuming ports 23 and 80.
+ This is almost never necessary (everybody uses standard ports),
+ and it makes sense to avoid reading this file.
+ If you disable this option, in the cases where port is explicitly
+ specified as a service name (e.g. "telnet HOST PORTNAME"),
+ it will still be looked up in /etc/services.
+
config BUSYBOX_CONFIG_FEATURE_EDITING
bool "Command line editing"
default BUSYBOX_DEFAULT_FEATURE_EDITING
Setting this option allows for prompts to use things like \w and
\$ and escape codes.
+config BUSYBOX_CONFIG_FEATURE_EDITING_WINCH
+ bool "Enable automatic tracking of window size changes"
+ default BUSYBOX_DEFAULT_FEATURE_EDITING_WINCH
+ depends on BUSYBOX_CONFIG_FEATURE_EDITING
+
config BUSYBOX_CONFIG_FEATURE_EDITING_ASK_TERMINAL
bool "Query cursor position from terminal"
default BUSYBOX_DEFAULT_FEATURE_EDITING_ASK_TERMINAL
default BUSYBOX_DEFAULT_FEATURE_VERBOSE_CP_MESSAGE
help
Error messages with this feature enabled:
- $ cp file /does_not_exist/file
- cp: cannot create '/does_not_exist/file': Path does not exist
- $ cp file /vmlinuz/file
- cp: cannot stat '/vmlinuz/file': Path has non-directory component
+
+ $ cp file /does_not_exist/file
+ cp: cannot create '/does_not_exist/file': Path does not exist
+ $ cp file /vmlinuz/file
+ cp: cannot stat '/vmlinuz/file': Path has non-directory component
+
If this feature is not enabled, they will be, respectively:
- cp: cannot create '/does_not_exist/file': No such file or directory
- cp: cannot stat '/vmlinuz/file': Not a directory
+
+ cp: cannot create '/does_not_exist/file': No such file or directory
+ cp: cannot stat '/vmlinuz/file': Not a directory
+
This will cost you ~60 bytes.
config BUSYBOX_CONFIG_FEATURE_USE_SENDFILE
bool "Support infiniband HW"
default BUSYBOX_DEFAULT_FEATURE_HWIB
help
- Support for printing infiniband addresses in
- network applets.
-
-endmenu
+ Support for printing infiniband addresses in network applets.
# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
+# see docs/Kconfig-language.txt.
#
menu "Login/Password Management Utilities"
user which has password encrypted with these algorithms.
config BUSYBOX_CONFIG_ADD_SHELL
- bool "add-shell"
- default BUSYBOX_DEFAULT_ADD_SHELL if BUSYBOX_CONFIG_DESKTOP
- help
- Add shells to /etc/shells.
+ bool "add-shell (3.1 kb)"
+ default BUSYBOX_DEFAULT_ADD_SHELL if BUSYBOX_CONFIG_DESKTOP
+ help
+ Add shells to /etc/shells.
config BUSYBOX_CONFIG_REMOVE_SHELL
- bool "remove-shell"
- default BUSYBOX_DEFAULT_REMOVE_SHELL if BUSYBOX_CONFIG_DESKTOP
- help
- Remove shells from /etc/shells.
+ bool "remove-shell (3 kb)"
+ default BUSYBOX_DEFAULT_REMOVE_SHELL if BUSYBOX_CONFIG_DESKTOP
+ help
+ Remove shells from /etc/shells.
config BUSYBOX_CONFIG_ADDGROUP
- bool "addgroup"
+ bool "addgroup (8.6 kb)"
default BUSYBOX_DEFAULT_ADDGROUP
+ select BUSYBOX_CONFIG_LONG_OPTS
help
Utility for creating a new group account.
-config BUSYBOX_CONFIG_FEATURE_ADDGROUP_LONG_OPTIONS
- bool "Enable long options"
- default BUSYBOX_DEFAULT_FEATURE_ADDGROUP_LONG_OPTIONS
- depends on BUSYBOX_CONFIG_ADDGROUP && BUSYBOX_CONFIG_LONG_OPTS
-
config BUSYBOX_CONFIG_FEATURE_ADDUSER_TO_GROUP
bool "Support adding users to groups"
default BUSYBOX_DEFAULT_FEATURE_ADDUSER_TO_GROUP
addgroup will add an existing user to an
existing group.
config BUSYBOX_CONFIG_ADDUSER
- bool "adduser"
+ bool "adduser (15 kb)"
default BUSYBOX_DEFAULT_ADDUSER
+ select BUSYBOX_CONFIG_LONG_OPTS
help
Utility for creating a new user account.
-config BUSYBOX_CONFIG_FEATURE_ADDUSER_LONG_OPTIONS
- bool "Enable long options"
- default BUSYBOX_DEFAULT_FEATURE_ADDUSER_LONG_OPTIONS
- depends on BUSYBOX_CONFIG_ADDUSER && BUSYBOX_CONFIG_LONG_OPTS
-
config BUSYBOX_CONFIG_FEATURE_CHECK_NAMES
bool "Enable sanity check on user/group names in adduser and addgroup"
default BUSYBOX_DEFAULT_FEATURE_CHECK_NAMES
help
Last valid system uid or gid for adduser and addgroup
config BUSYBOX_CONFIG_CHPASSWD
- bool "chpasswd"
+ bool "chpasswd (18 kb)"
default BUSYBOX_DEFAULT_CHPASSWD
help
Reads a file of user name and password pairs from standard input
help
Possible choices are "d[es]", "m[d5]", "s[ha256]" or "sha512".
config BUSYBOX_CONFIG_CRYPTPW
- bool "cryptpw"
+ bool "cryptpw (14 kb)"
default BUSYBOX_DEFAULT_CRYPTPW
help
Encrypts the given password with the crypt(3) libc function
using the given salt.
config BUSYBOX_CONFIG_MKPASSWD
- bool "mkpasswd"
+ bool "mkpasswd (15 kb)"
default BUSYBOX_DEFAULT_MKPASSWD
help
Encrypts the given password with the crypt(3) libc function
using the given salt. Debian has this utility under mkpasswd
name. Busybox provides mkpasswd as an alias for cryptpw.
config BUSYBOX_CONFIG_DELUSER
- bool "deluser"
+ bool "deluser (9.1 kb)"
default BUSYBOX_DEFAULT_DELUSER
help
Utility for deleting a user account.
config BUSYBOX_CONFIG_DELGROUP
- bool "delgroup"
+ bool "delgroup (6.4 kb)"
default BUSYBOX_DEFAULT_DELGROUP
help
Utility for deleting a group account.
If called with two non-option arguments, deluser
or delgroup will remove an user from a specified group.
config BUSYBOX_CONFIG_GETTY
- bool "getty"
+ bool "getty (10 kb)"
default BUSYBOX_DEFAULT_GETTY
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
read -r login
exec /bin/login "$login"
config BUSYBOX_CONFIG_LOGIN
- bool "login"
+ bool "login (24 kb)"
default BUSYBOX_DEFAULT_LOGIN
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
login is used when signing onto a system.
- Note that Busybox binary must be setuid root for this applet to
+ Note that busybox binary must be setuid root for this applet to
work properly.
config BUSYBOX_CONFIG_LOGIN_SESSION_AS_CHILD
The file contains the device names of tty lines (one per line,
without leading /dev/) on which root is allowed to login.
config BUSYBOX_CONFIG_PASSWD
- bool "passwd"
+ bool "passwd (21 kb)"
default BUSYBOX_DEFAULT_PASSWD
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
may change the password for any account. The administrator of a group
may change the password for the group.
- Note that Busybox binary must be setuid root for this applet to
+ Note that busybox binary must be setuid root for this applet to
work properly.
config BUSYBOX_CONFIG_FEATURE_PASSWD_WEAK_CHECK
help
With this option passwd will refuse new passwords which are "weak".
config BUSYBOX_CONFIG_SU
- bool "su"
+ bool "su (19 kb)"
default BUSYBOX_DEFAULT_SU
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
default BUSYBOX_DEFAULT_FEATURE_SU_BLANK_PW_NEEDS_SECURE_TTY
depends on BUSYBOX_CONFIG_SU
config BUSYBOX_CONFIG_SULOGIN
- bool "sulogin"
+ bool "sulogin (17 kb)"
default BUSYBOX_DEFAULT_SULOGIN
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
sulogin is invoked when the system goes into single user
mode (this is done through an entry in inittab).
config BUSYBOX_CONFIG_VLOCK
- bool "vlock"
+ bool "vlock (17 kb)"
default BUSYBOX_DEFAULT_VLOCK
help
Build the "vlock" applet which allows you to lock (virtual) terminals.
- Note that Busybox binary must be setuid root for this applet to
+ Note that busybox binary must be setuid root for this applet to
work properly.
endmenu
menu "Mail Utilities"
config BUSYBOX_CONFIG_MAKEMIME
- bool "makemime"
+ bool "makemime (5.4 kb)"
default BUSYBOX_DEFAULT_MAKEMIME
help
Create MIME-formatted messages.
config BUSYBOX_CONFIG_POPMAILDIR
- bool "popmaildir"
+ bool "popmaildir (10 kb)"
default BUSYBOX_DEFAULT_POPMAILDIR
help
Simple yet powerful POP3 mail popper. Delivers content
Allow to use a custom program for message actual delivery
(-M "prog [args...]").
config BUSYBOX_CONFIG_REFORMIME
- bool "reformime"
+ bool "reformime (7.5 kb)"
default BUSYBOX_DEFAULT_REFORMIME
help
Parse MIME-formatted messages.
Accept (for compatibility only) and ignore options
other than -x and -X.
config BUSYBOX_CONFIG_SENDMAIL
- bool "sendmail"
+ bool "sendmail (14 kb)"
default BUSYBOX_DEFAULT_SENDMAIL
help
Barebones sendmail.
# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
+# see docs/Kconfig-language.txt.
#
menu "Miscellaneous Utilities"
config BUSYBOX_CONFIG_ADJTIMEX
- bool "adjtimex"
+ bool "adjtimex (4.7 kb)"
default BUSYBOX_DEFAULT_ADJTIMEX
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Adjtimex reads and optionally sets adjustment parameters for
the Linux clock adjustment algorithm.
config BUSYBOX_CONFIG_BBCONFIG
- bool "bbconfig"
+ bool "bbconfig (9.7 kb)"
default BUSYBOX_DEFAULT_BBCONFIG
help
The bbconfig applet will print the config file with which
be noticeable. Also, if you run executables directly from ROM
and have very little memory, this might not be a win. Otherwise,
you probably want this.
+config BUSYBOX_CONFIG_BC
+ bool "bc (45 kb)"
+ default BUSYBOX_DEFAULT_BC
+ select BUSYBOX_CONFIG_FEATURE_DC_BIG
+ help
+ bc is a command-line, arbitrary-precision calculator with a
+ Turing-complete language. See the GNU bc manual
+ (https://www.gnu.org/software/bc/manual/bc.html) and bc spec
+ (http://pubs.opengroup.org/onlinepubs/9699919799/utilities/bc.html).
+
+ This bc has five differences to the GNU bc:
+ 1) The period (.) is a shortcut for "last", as in the BSD bc.
+ 2) Arrays are copied before being passed as arguments to
+ functions. This behavior is required by the bc spec.
+ 3) Arrays can be passed to the builtin "length" function to get
+ the number of elements in the array. This prints "1":
+ a[0] = 0; length(a[])
+ 4) The precedence of the boolean "not" operator (!) is equal to
+ that of the unary minus (-) negation operator. This still
+ allows POSIX-compliant scripts to work while somewhat
+ preserving expected behavior (versus C) and making parsing
+ easier.
+ 5) "read()" accepts expressions, not only numeric literals.
+
+config BUSYBOX_CONFIG_DC
+ bool "dc (36 kb)"
+ default BUSYBOX_DEFAULT_DC
+ help
+ dc is a reverse-polish notation command-line calculator which
+ supports unlimited precision arithmetic. See the FreeBSD man page
+ (https://www.unix.com/man-page/FreeBSD/1/dc/) and GNU dc manual
+ (https://www.gnu.org/software/bc/manual/dc-1.05/html_mono/dc.html).
+
+ This dc has a few differences from the two above:
+ 1) When printing a byte stream (command "P"), this dc follows what
+ the FreeBSD dc does.
+ 2) Implements the GNU extensions for divmod ("~") and
+ modular exponentiation ("|").
+ 3) Implements all FreeBSD extensions, except for "J" and "M".
+ 4) Like the FreeBSD dc, this dc supports extended registers.
+ However, they are implemented differently. When it encounters
+ whitespace where a register should be, it skips the whitespace.
+ If the character following is not a lowercase letter, an error
+ is issued. Otherwise, the register name is parsed by the
+ following regex: [a-z][a-z0-9_]*
+ This generally means that register names will be surrounded by
+ whitespace. Examples:
+ l idx s temp L index S temp2 < do_thing
+ Also note that, like the FreeBSD dc, extended registers are not
+ allowed unless the "-x" option is given.
+
+if BC || BUSYBOX_CONFIG_DC # for menuconfig indenting
+
+config BUSYBOX_CONFIG_FEATURE_DC_BIG
+ bool "Use bc code base for dc (larger, more features)"
+ default BUSYBOX_DEFAULT_FEATURE_DC_BIG
+
+config BUSYBOX_CONFIG_FEATURE_DC_LIBM
+ bool "Enable power and exp functions (requires libm)"
+ default BUSYBOX_DEFAULT_FEATURE_DC_LIBM
+ depends on BUSYBOX_CONFIG_DC && !BUSYBOX_CONFIG_BC && !BUSYBOX_CONFIG_FEATURE_DC_BIG
+ help
+ Enable power and exp functions.
+ NOTE: This will require libm to be present for linking.
+
+config BUSYBOX_CONFIG_FEATURE_BC_INTERACTIVE
+ bool "Interactive mode (+4kb)"
+ default BUSYBOX_DEFAULT_FEATURE_BC_INTERACTIVE
+ depends on BUSYBOX_CONFIG_BC || (BUSYBOX_CONFIG_DC && BUSYBOX_CONFIG_FEATURE_DC_BIG)
+ help
+ Enable interactive mode: when started on a tty,
+ ^C interrupts execution and returns to command line,
+ errors also return to command line instead of exiting,
+ line editing with history is available.
+
+ With this option off, input can still be taken from tty,
+ but all errors are fatal, ^C is fatal,
+ tty is treated exactly the same as any other
+ standard input (IOW: no line editing).
+
+config BUSYBOX_CONFIG_FEATURE_BC_LONG_OPTIONS
+ bool "Enable bc/dc long options"
+ default BUSYBOX_DEFAULT_FEATURE_BC_LONG_OPTIONS
+ depends on BUSYBOX_CONFIG_BC || (BUSYBOX_CONFIG_DC && BUSYBOX_CONFIG_FEATURE_DC_BIG)
+
+endif
config BUSYBOX_CONFIG_BEEP
- bool "beep"
+ bool "beep (2.4 kb)"
default BUSYBOX_DEFAULT_BEEP
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
help
Length in ms for default beep.
config BUSYBOX_CONFIG_CHAT
- bool "chat"
+ bool "chat (6.3 kb)"
default BUSYBOX_DEFAULT_CHAT
help
Simple chat utility.
help
Support CLR_ABORT directive.
config BUSYBOX_CONFIG_CONSPY
- bool "conspy"
+ bool "conspy (10 kb)"
default BUSYBOX_DEFAULT_CONSPY
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
or conspy -nd NUM screenshot of console num
or conspy -cs NUM poor man's GNU screen like
config BUSYBOX_CONFIG_CROND
- bool "crond"
+ bool "crond (14 kb)"
default BUSYBOX_DEFAULT_CROND
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
files and executes commands on behalf of the users in question.
This is a port of dcron from slackware. It uses files of the
format /var/spool/cron/crontabs/<username> files, for example:
- $ cat /var/spool/cron/crontabs/root
- # Run daily cron jobs at 4:40 every day:
- 40 4 * * * /etc/cron/daily > /dev/null 2>&1
+ $ cat /var/spool/cron/crontabs/root
+ # Run daily cron jobs at 4:40 every day:
+ 40 4 * * * /etc/cron/daily > /dev/null 2>&1
config BUSYBOX_CONFIG_FEATURE_CROND_D
- bool "Support option -d to redirect output to stderr"
+ bool "Support -d (redirect output to stderr)"
depends on BUSYBOX_CONFIG_CROND
default BUSYBOX_DEFAULT_FEATURE_CROND_D
help
help
Command output will be sent to corresponding user via email.
+config BUSYBOX_CONFIG_FEATURE_CROND_SPECIAL_TIMES
+ bool "Support special times (@reboot, @daily, etc) in crontabs"
+ default BUSYBOX_DEFAULT_FEATURE_CROND_SPECIAL_TIMES
+ depends on BUSYBOX_CONFIG_CROND
+ help
+ string meaning
+ ------ -------
+ @reboot Run once, at startup
+ @yearly Run once a year: "0 0 1 1 *"
+ @annually Same as @yearly: "0 0 1 1 *"
+ @monthly Run once a month: "0 0 1 * *"
+ @weekly Run once a week: "0 0 * * 0"
+ @daily Run once a day: "0 0 * * *"
+ @midnight Same as @daily: "0 0 * * *"
+ @hourly Run once an hour: "0 * * * *"
+
config BUSYBOX_CONFIG_FEATURE_CROND_DIR
string "crond spool directory"
default BUSYBOX_DEFAULT_FEATURE_CROND_DIR
help
Location of crond spool.
config BUSYBOX_CONFIG_CRONTAB
- bool "crontab"
+ bool "crontab (10 kb)"
default BUSYBOX_DEFAULT_CRONTAB
help
Crontab manipulates the crontab for a particular user. Only
the superuser may specify a different user and/or crontab directory.
- Note that Busybox binary must be setuid root for this applet to
+ Note that busybox binary must be setuid root for this applet to
work properly.
-config BUSYBOX_CONFIG_DC
- bool "dc"
- default BUSYBOX_DEFAULT_DC
- help
- Dc is a reverse-polish desk calculator which supports unlimited
- precision arithmetic.
-
-config BUSYBOX_CONFIG_FEATURE_DC_LIBM
- bool "Enable power and exp functions (requires libm)"
- default BUSYBOX_DEFAULT_FEATURE_DC_LIBM
- depends on BUSYBOX_CONFIG_DC
- help
- Enable power and exp functions.
- NOTE: This will require libm to be present for linking.
config BUSYBOX_CONFIG_DEVFSD
bool "devfsd (obsolete)"
default BUSYBOX_DEFAULT_DEVFSD
depends on BUSYBOX_CONFIG_DEVFSD
help
-fg Run the daemon in the foreground.
- -np Exit after parsing the configuration file.
- Do not poll for events.
+ -np Exit after parsing config. Do not poll for events.
config BUSYBOX_CONFIG_DEVFSD_VERBOSE
bool "Increases logging (and size)"
/dev/loop0. If your /dev directory has normal names instead of
devfs names, you don't want this.
config BUSYBOX_CONFIG_DEVMEM
- bool "devmem"
+ bool "devmem (2.5 kb)"
default BUSYBOX_DEFAULT_DEVMEM
help
devmem is a small program that reads and writes from physical
memory using /dev/mem.
config BUSYBOX_CONFIG_FBSPLASH
- bool "fbsplash"
+ bool "fbsplash (26 kb)"
default BUSYBOX_DEFAULT_FBSPLASH
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Shows splash image and progress bar on framebuffer device.
- Can be used during boot phase of an embedded device. ~2kb.
+ Can be used during boot phase of an embedded device.
Usage:
- use kernel option 'vga=xxx' or otherwise enable fb device.
- put somewhere fbsplash.cfg file and an image in .ppm format.
"NN" (ASCII decimal number) - percentage to show on progress bar
"exit" - well you guessed it
config BUSYBOX_CONFIG_FLASH_ERASEALL
- bool "flash_eraseall"
+ bool "flash_eraseall (5.9 kb)"
default BUSYBOX_DEFAULT_FLASH_ERASEALL # doesn't build on Ubuntu 8.04
help
The flash_eraseall binary from mtd-utils as of git head c4c6a59eb.
This utility is used to erase the whole MTD device.
config BUSYBOX_CONFIG_FLASH_LOCK
- bool "flash_lock"
+ bool "flash_lock (2.1 kb)"
default BUSYBOX_DEFAULT_FLASH_LOCK # doesn't build on Ubuntu 8.04
help
The flash_lock binary from mtd-utils as of git head 5ec0c10d0. This
utility locks part or all of the flash device.
config BUSYBOX_CONFIG_FLASH_UNLOCK
- bool "flash_unlock"
+ bool "flash_unlock (1.3 kb)"
default BUSYBOX_DEFAULT_FLASH_UNLOCK # doesn't build on Ubuntu 8.04
help
The flash_unlock binary from mtd-utils as of git head 5ec0c10d0. This
utility unlocks part or all of the flash device.
config BUSYBOX_CONFIG_FLASHCP
- bool "flashcp"
+ bool "flashcp (5.3 kb)"
default BUSYBOX_DEFAULT_FLASHCP # doesn't build on Ubuntu 8.04
help
The flashcp binary, inspired by mtd-utils as of git head 5eceb74f7.
This utility is used to copy images into a MTD device.
config BUSYBOX_CONFIG_HDPARM
- bool "hdparm"
+ bool "hdparm (25 kb)"
default BUSYBOX_DEFAULT_HDPARM
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Get/Set hard drive parameters. Primarily intended for ATA
- drives. Adds about 13k (or around 30k if you enable the
- FEATURE_HDPARM_GET_IDENTITY option)....
+ drives.
config BUSYBOX_CONFIG_FEATURE_HDPARM_GET_IDENTITY
bool "Support obtaining detailed information directly from drives"
depends on BUSYBOX_CONFIG_HDPARM
help
Enable the 'hdparm -d' option to get/set using_dma flag.
+config BUSYBOX_CONFIG_HEXEDIT
+ bool "hexedit (21 kb)"
+ default BUSYBOX_DEFAULT_HEXEDIT
+ help
+ Edit file in hexadecimal.
config BUSYBOX_CONFIG_I2CGET
- bool "i2cget"
+ bool "i2cget (5.5 kb)"
default BUSYBOX_DEFAULT_I2CGET
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Read from I2C/SMBus chip registers.
config BUSYBOX_CONFIG_I2CSET
- bool "i2cset"
+ bool "i2cset (6.7 kb)"
default BUSYBOX_DEFAULT_I2CSET
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Set I2C registers.
config BUSYBOX_CONFIG_I2CDUMP
- bool "i2cdump"
+ bool "i2cdump (7.1 kb)"
default BUSYBOX_DEFAULT_I2CDUMP
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Examine I2C registers.
config BUSYBOX_CONFIG_I2CDETECT
- bool "i2cdetect"
+ bool "i2cdetect (7.1 kb)"
default BUSYBOX_DEFAULT_I2CDETECT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Detect I2C chips.
config BUSYBOX_CONFIG_INOTIFYD
- bool "inotifyd"
+ bool "inotifyd (3.6 kb)"
default BUSYBOX_DEFAULT_INOTIFYD # doesn't build on Knoppix 5
help
Simple inotify daemon. Reports filesystem changes. Requires
kernel >= 2.6.13
config BUSYBOX_CONFIG_LESS
- bool "less"
+ bool "less (16 kb)"
default BUSYBOX_DEFAULT_LESS
help
'less' is a pager, meaning that it displays text files. It possesses
bool "Enable -N (dynamic switching of line numbers)"
default BUSYBOX_DEFAULT_FEATURE_LESS_LINENUMS
depends on BUSYBOX_CONFIG_FEATURE_LESS_DASHCMD
+
+config BUSYBOX_CONFIG_FEATURE_LESS_RAW
+ bool "Enable -R ('raw control characters')"
+ default BUSYBOX_DEFAULT_FEATURE_LESS_RAW
+ depends on BUSYBOX_CONFIG_FEATURE_LESS_DASHCMD
+ help
+ This is essential for less applet to work with tools that use colors
+ and paging, such as git, systemd tools or nmcli.
+
+config BUSYBOX_CONFIG_FEATURE_LESS_ENV
+ bool "Take options from $LESS environment variable"
+ default BUSYBOX_DEFAULT_FEATURE_LESS_ENV
+ depends on BUSYBOX_CONFIG_FEATURE_LESS_DASHCMD
+ help
+ This is essential for less applet to work with tools that use colors
+ and paging, such as git, systemd tools or nmcli.
config BUSYBOX_CONFIG_LOCK
bool "lock"
default BUSYBOX_DEFAULT_LOCK
help
- Small utility for using locks in scripts
+ Small utility for using locks in scripts
config BUSYBOX_CONFIG_LSSCSI
- bool "lsscsi"
+ bool "lsscsi (2.5 kb)"
default BUSYBOX_DEFAULT_LSSCSI
#select PLATFORM_LINUX
help
This version uses sysfs (/sys/bus/scsi/devices) only.
config BUSYBOX_CONFIG_MAKEDEVS
- bool "makedevs"
+ bool "makedevs (9.2 kb)"
default BUSYBOX_DEFAULT_MAKEDEVS
help
'makedevs' is a utility used to create a batch of devices with
endchoice
config BUSYBOX_CONFIG_MAN
- bool "man"
+ bool "man (26 kb)"
default BUSYBOX_DEFAULT_MAN
help
Format and display manual pages.
config BUSYBOX_CONFIG_MICROCOM
- bool "microcom"
+ bool "microcom (5.7 kb)"
default BUSYBOX_DEFAULT_MICROCOM
help
The poor man's minicom utility for chatting with serial port devices.
config BUSYBOX_CONFIG_MT
- bool "mt"
+ bool "mt (2.5 kb)"
default BUSYBOX_DEFAULT_MT
help
mt is used to control tape devices. You can use the mt utility
to advance or rewind a tape past a specified number of archive
files on the tape.
config BUSYBOX_CONFIG_NANDWRITE
- bool "nandwrite"
+ bool "nandwrite (4.8 kb)"
default BUSYBOX_DEFAULT_NANDWRITE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Write to the specified MTD device, with bad blocks awareness
config BUSYBOX_CONFIG_NANDDUMP
- bool "nanddump"
+ bool "nanddump (5.2 kb)"
default BUSYBOX_DEFAULT_NANDDUMP
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Dump the content of raw NAND chip
config BUSYBOX_CONFIG_PARTPROBE
- bool "partprobe"
+ bool "partprobe (3.5 kb)"
default BUSYBOX_DEFAULT_PARTPROBE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Ask kernel to rescan partition table.
config BUSYBOX_CONFIG_RAIDAUTORUN
- bool "raidautorun"
+ bool "raidautorun (1.3 kb)"
default BUSYBOX_DEFAULT_RAIDAUTORUN
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
raidautorun tells the kernel md driver to
search and start RAID arrays.
config BUSYBOX_CONFIG_READAHEAD
- bool "readahead"
+ bool "readahead (1.5 kb)"
default BUSYBOX_DEFAULT_READAHEAD
depends on BUSYBOX_CONFIG_LFS
select BUSYBOX_CONFIG_PLATFORM_LINUX
As readahead(2) blocks until each file has been read, it is best to
run this applet as a background job.
config BUSYBOX_CONFIG_RFKILL
- bool "rfkill"
+ bool "rfkill (4.4 kb)"
default BUSYBOX_DEFAULT_RFKILL # doesn't build on Ubuntu 9.04
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
rfkill block|unblock wlan : block/unblock all wlan(wifi) devices
config BUSYBOX_CONFIG_RUNLEVEL
- bool "runlevel"
+ bool "runlevel (559 bytes)"
default BUSYBOX_DEFAULT_RUNLEVEL
depends on BUSYBOX_CONFIG_FEATURE_UTMP
help
- find the current and previous system runlevel.
+ Find the current and previous system runlevel.
This applet uses utmp but does not rely on busybox supporing
utmp on purpose. It is used by e.g. emdebian via /etc/init.d/rc.
config BUSYBOX_CONFIG_RX
- bool "rx"
+ bool "rx (2.9 kb)"
default BUSYBOX_DEFAULT_RX
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Receive files using the Xmodem protocol.
+config BUSYBOX_CONFIG_SETFATTR
+ bool "setfattr (3.7 kb)"
+ default BUSYBOX_DEFAULT_SETFATTR
+ help
+ Set/delete extended attributes on files
config BUSYBOX_CONFIG_SETSERIAL
- bool "setserial"
+ bool "setserial (6.9 kb)"
default BUSYBOX_DEFAULT_SETSERIAL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Retrieve or set Linux serial port.
config BUSYBOX_CONFIG_STRINGS
- bool "strings"
+ bool "strings (4.6 kb)"
default BUSYBOX_DEFAULT_STRINGS
help
strings prints the printable character sequences for each file
specified.
config BUSYBOX_CONFIG_TIME
- bool "time"
+ bool "time (6.8 kb)"
default BUSYBOX_DEFAULT_TIME
help
The time command runs the specified program with the given arguments.
When the command finishes, time writes a message to standard output
giving timing statistics about this program run.
config BUSYBOX_CONFIG_TTYSIZE
- bool "ttysize"
+ bool "ttysize (432 bytes)"
default BUSYBOX_DEFAULT_TTYSIZE
help
A replacement for "stty size". Unlike stty, can report only width,
error, but returns default 80x24.
Usage in shell scripts: width=`ttysize w`.
config BUSYBOX_CONFIG_UBIATTACH
- bool "ubiattach"
+ bool "ubiattach (4.2 kb)"
default BUSYBOX_DEFAULT_UBIATTACH
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Attach MTD device to an UBI device.
config BUSYBOX_CONFIG_UBIDETACH
- bool "ubidetach"
+ bool "ubidetach (4.1 kb)"
default BUSYBOX_DEFAULT_UBIDETACH
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Detach MTD device from an UBI device.
config BUSYBOX_CONFIG_UBIMKVOL
- bool "ubimkvol"
+ bool "ubimkvol (5.3 kb)"
default BUSYBOX_DEFAULT_UBIMKVOL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Create a UBI volume.
config BUSYBOX_CONFIG_UBIRMVOL
- bool "ubirmvol"
+ bool "ubirmvol (4.9 kb)"
default BUSYBOX_DEFAULT_UBIRMVOL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Delete a UBI volume.
config BUSYBOX_CONFIG_UBIRSVOL
- bool "ubirsvol"
+ bool "ubirsvol (4.2 kb)"
default BUSYBOX_DEFAULT_UBIRSVOL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Resize a UBI volume.
config BUSYBOX_CONFIG_UBIUPDATEVOL
- bool "ubiupdatevol"
+ bool "ubiupdatevol (5.2 kb)"
default BUSYBOX_DEFAULT_UBIUPDATEVOL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Update a UBI volume.
config BUSYBOX_CONFIG_UBIRENAME
- bool "ubirename"
+ bool "ubirename (2.4 kb)"
default BUSYBOX_DEFAULT_UBIRENAME
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Utility to rename UBI volumes
config BUSYBOX_CONFIG_VOLNAME
- bool "volname"
+ bool "volname (1.6 kb)"
default BUSYBOX_DEFAULT_VOLNAME
help
Prints a CD-ROM volume name.
config BUSYBOX_CONFIG_WATCHDOG
- bool "watchdog"
+ bool "watchdog (5.3 kb)"
default BUSYBOX_DEFAULT_WATCHDOG
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
+# see docs/Kconfig-language.txt.
#
menu "Linux Module Utilities"
/etc/modules/$module_name files.
config BUSYBOX_CONFIG_DEPMOD
- bool "depmod"
+ bool "depmod (27 kb)"
default BUSYBOX_DEFAULT_DEPMOD
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
and modules.symbols) that contain dependency information
for modprobe.
config BUSYBOX_CONFIG_INSMOD
- bool "insmod"
+ bool "insmod (22 kb)"
default BUSYBOX_DEFAULT_INSMOD
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
insmod is used to load specified modules in the running kernel.
config BUSYBOX_CONFIG_LSMOD
- bool "lsmod"
+ bool "lsmod (1.9 kb)"
default BUSYBOX_DEFAULT_LSMOD
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
the format of module-init-tools for Linux kernel 2.6.
Increases size somewhat.
config BUSYBOX_CONFIG_MODINFO
- bool "modinfo"
+ bool "modinfo (24 kb)"
default BUSYBOX_DEFAULT_MODINFO
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Show information about a Linux Kernel module
config BUSYBOX_CONFIG_MODPROBE
- bool "modprobe"
+ bool "modprobe (28 kb)"
default BUSYBOX_DEFAULT_MODPROBE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
hardware autodetection scripts to load modules like evdev, frame
buffer drivers etc.
config BUSYBOX_CONFIG_RMMOD
- bool "rmmod"
+ bool "rmmod (3.3 kb)"
default BUSYBOX_DEFAULT_RMMOD
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
help
Generate and parse modules.alias containing aliases for bus
identifiers:
- alias pcmcia:m*c*f03fn*pfn*pa*pb*pc*pd* parport_cs
+ alias pcmcia:m*c*f03fn*pfn*pa*pb*pc*pd* parport_cs
and aliases for logical modules names e.g.:
- alias padlock_aes aes
- alias aes_i586 aes
- alias aes_generic aes
+ alias padlock_aes aes
+ alias aes_i586 aes
+ alias aes_generic aes
Say Y if unsure.
help
Generate and parse modules.symbols containing aliases for
symbol_request() kernel calls, such as:
- alias symbol:usb_sg_init usbcore
+ alias symbol:usb_sg_init usbcore
Say Y if unsure.
# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
+# see docs/Kconfig-language.txt.
#
menu "Networking Utilities"
config BUSYBOX_CONFIG_FEATURE_IPV6
bool "Enable IPv6 support"
default BUSYBOX_DEFAULT_FEATURE_IPV6
- depends on IPV6
help
Enable IPv6 support in busybox.
This adds IPv6 support in the networking applets.
"can't resolve 'hostname.com'" and want to know more.
This may increase size of your executable a bit.
+config BUSYBOX_CONFIG_FEATURE_TLS_SHA1
+ bool "In TLS code, support ciphers which use deprecated SHA1"
+ depends on BUSYBOX_CONFIG_TLS
+ default BUSYBOX_DEFAULT_FEATURE_TLS_SHA1
+ help
+ Selecting this option increases interoperability with very old
+ servers, but slightly increases code size.
+
+ Most TLS servers support SHA256 today (2018), since SHA1 is
+ considered possibly insecure (although not yet definitely broken).
+
config BUSYBOX_CONFIG_ARP
- bool "arp"
+ bool "arp (10 kb)"
default BUSYBOX_DEFAULT_ARP
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Manipulate the system ARP cache.
config BUSYBOX_CONFIG_ARPING
- bool "arping"
+ bool "arping (9 kb)"
default BUSYBOX_DEFAULT_ARPING
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Ping hosts by ARP packets.
-
config BUSYBOX_CONFIG_BRCTL
- bool "brctl"
+ bool "brctl (4.7 kb)"
default BUSYBOX_DEFAULT_BRCTL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
depends on BUSYBOX_CONFIG_BRCTL
help
Add support for extended option like:
- setageing, setfd, sethello, setmaxage,
- setpathcost, setportprio, setbridgeprio,
- stp
+ setageing, setfd, sethello, setmaxage,
+ setpathcost, setportprio, setbridgeprio,
+ stp
This adds about 600 bytes.
config BUSYBOX_CONFIG_FEATURE_BRCTL_SHOW
depends on BUSYBOX_CONFIG_BRCTL && BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
help
Add support for option which prints the current config:
- show
+ show
config BUSYBOX_CONFIG_DNSD
- bool "dnsd"
+ bool "dnsd (9.8 kb)"
default BUSYBOX_DEFAULT_DNSD
help
Small and static DNS server daemon.
config BUSYBOX_CONFIG_ETHER_WAKE
- bool "ether-wake"
+ bool "ether-wake (4.9 kb)"
default BUSYBOX_DEFAULT_ETHER_WAKE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Send a magic packet to wake up sleeping machines.
config BUSYBOX_CONFIG_FTPD
- bool "ftpd"
+ bool "ftpd (30 kb)"
default BUSYBOX_DEFAULT_FTPD
help
Simple FTP daemon. You have to run it via inetd.
config BUSYBOX_CONFIG_FEATURE_FTPD_WRITE
- bool "Enable upload commands"
+ bool "Enable -w (upload commands)"
default BUSYBOX_DEFAULT_FEATURE_FTPD_WRITE
depends on BUSYBOX_CONFIG_FTPD
help
- Enable all kinds of FTP upload commands (-w option)
+ Enable -w option. "ftpd -w" will accept upload commands
+ such as STOR, STOU, APPE, DELE, MKD, RMD, rename commands.
config BUSYBOX_CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST
bool "Enable workaround for RFC-violating clients"
default BUSYBOX_DEFAULT_FEATURE_FTPD_AUTHENTICATION
depends on BUSYBOX_CONFIG_FTPD
help
- Enable basic system login as seen in telnet etc.
+ Require login, and change to logged in user's UID:GID before
+ accessing any files. Option "-a USER" allows "anonymous"
+ logins (treats them as if USER logged in).
+
+ If this option is not selected, ftpd runs with the rights
+ of the user it was started under, and does not require login.
+ Take care to not launch it under root.
config BUSYBOX_CONFIG_FTPGET
- bool "ftpget"
+ bool "ftpget (7.8 kb)"
default BUSYBOX_DEFAULT_FTPGET
help
Retrieve a remote file via FTP.
config BUSYBOX_CONFIG_FTPPUT
- bool "ftpput"
+ bool "ftpput (7.5 kb)"
default BUSYBOX_DEFAULT_FTPPUT
help
Store a remote file via FTP.
default BUSYBOX_DEFAULT_FEATURE_FTPGETPUT_LONG_OPTIONS
depends on BUSYBOX_CONFIG_LONG_OPTS && (BUSYBOX_CONFIG_FTPGET || BUSYBOX_CONFIG_FTPPUT)
config BUSYBOX_CONFIG_HOSTNAME
- bool "hostname"
+ bool "hostname (5.5 kb)"
default BUSYBOX_DEFAULT_HOSTNAME
help
Show or set the system's host name.
config BUSYBOX_CONFIG_DNSDOMAINNAME
- bool "dnsdomainname"
+ bool "dnsdomainname (3.6 kb)"
default BUSYBOX_DEFAULT_DNSDOMAINNAME
help
Alias to "hostname -d".
config BUSYBOX_CONFIG_HTTPD
- bool "httpd"
+ bool "httpd (32 kb)"
default BUSYBOX_DEFAULT_HTTPD
help
HTTP server.
different user.
config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
- bool "Enable Basic http Authentication"
+ bool "Enable HTTP authentication"
default BUSYBOX_DEFAULT_FEATURE_HTTPD_BASIC_AUTH
depends on BUSYBOX_CONFIG_HTTPD
help
/adm:toor:PaSsWd
config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5
- bool "Support MD5 crypted passwords for http Authentication"
+ bool "Support MD5-encrypted passwords in HTTP authentication"
default BUSYBOX_DEFAULT_FEATURE_HTTPD_AUTH_MD5
depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
help
This option allows you to define custom error pages in
the configuration file instead of the default HTTP status
error pages. For instance, if you add the line:
- E404:/path/e404.html
+ E404:/path/e404.html
in the config file, the server will respond the specified
'/path/e404.html' file instead of the terse '404 NOT FOUND'
message.
This option allows you to define URLs that will be forwarded
to another HTTP server. To setup add the following line to the
configuration file
- P:/url/:http://hostname[:port]/new/path/
+ P:/url/:http://hostname[:port]/new/path/
Then a request to /url/myfile will be forwarded to
http://hostname[:port]/new/path/myfile.
Makes httpd send files using GZIP content encoding if the
client supports it and a pre-compressed <file>.gz exists.
config BUSYBOX_CONFIG_IFCONFIG
- bool "ifconfig"
+ bool "ifconfig (12 kb)"
default BUSYBOX_DEFAULT_IFCONFIG
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Setting this will make ifconfig attempt to find the broadcast
automatically if the value '+' is used.
config BUSYBOX_CONFIG_IFENSLAVE
- bool "ifenslave"
+ bool "ifenslave (13 kb)"
default BUSYBOX_DEFAULT_IFENSLAVE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Userspace application to bind several interfaces
to a logical interface (use with kernel bonding driver).
config BUSYBOX_CONFIG_IFPLUGD
- bool "ifplugd"
+ bool "ifplugd (10 kb)"
default BUSYBOX_DEFAULT_IFPLUGD
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Network interface plug detection daemon.
config BUSYBOX_CONFIG_IFUP
- bool "ifup"
+ bool "ifup (14 kb)"
default BUSYBOX_DEFAULT_IFUP
help
Activate the specified interfaces. This applet makes use
via busybox or via standalone utilities.
config BUSYBOX_CONFIG_IFDOWN
- bool "ifdown"
+ bool "ifdown (13 kb)"
default BUSYBOX_DEFAULT_IFDOWN
help
Deactivate the specified interfaces.
than the default of using the older "ifconfig" and "route" utilities.
If Y: you must install either the full-blown iproute2 package
- or enable "ip" applet in Busybox, or the "ifup" and "ifdown" applets
+ or enable "ip" applet in busybox, or the "ifup" and "ifdown" applets
will not work.
If N: you must install either the full-blown ifconfig and route
- utilities, or enable these applets in Busybox.
+ utilities, or enable these applets in busybox.
config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4
bool "Support IPv4"
Otherwise, if udhcpc applet is enabled, it is used.
Otherwise, ifup/ifdown will have no support for DHCP.
config BUSYBOX_CONFIG_INETD
- bool "inetd"
+ bool "inetd (18 kb)"
default BUSYBOX_DEFAULT_INETD
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
Internet superserver daemon
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO
- bool "Support echo service"
+ bool "Support echo service on port 7"
default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_ECHO
depends on BUSYBOX_CONFIG_INETD
help
- Echo received data internal inetd service
+ Internal service which echoes data back.
+ Activated by configuration lines like these:
+ echo stream tcp nowait root internal
+ echo dgram udp wait root internal
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
- bool "Support discard service"
+ bool "Support discard service on port 8"
default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
depends on BUSYBOX_CONFIG_INETD
help
- Internet /dev/null internal inetd service
+ Internal service which discards all input.
+ Activated by configuration lines like these:
+ discard stream tcp nowait root internal
+ discard dgram udp wait root internal
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME
- bool "Support time service"
+ bool "Support time service on port 37"
default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_TIME
depends on BUSYBOX_CONFIG_INETD
help
- Return 32 bit time since 1900 internal inetd service
+ Internal service which returns big-endian 32-bit number
+ of seconds passed since 1900-01-01. The number wraps around
+ on overflow.
+ Activated by configuration lines like these:
+ time stream tcp nowait root internal
+ time dgram udp wait root internal
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
- bool "Support daytime service"
+ bool "Support daytime service on port 13"
default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
depends on BUSYBOX_CONFIG_INETD
help
- Return human-readable time internal inetd service
+ Internal service which returns human-readable time.
+ Activated by configuration lines like these:
+ daytime stream tcp nowait root internal
+ daytime dgram udp wait root internal
config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
- bool "Support chargen service"
+ bool "Support chargen service on port 19"
default BUSYBOX_DEFAULT_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
depends on BUSYBOX_CONFIG_INETD
help
- Familiar character generator internal inetd service
+ Internal service which generates endless stream
+ of all ASCII chars beetween space and char 126.
+ Activated by configuration lines like these:
+ chargen stream tcp nowait root internal
+ chargen dgram udp wait root internal
+config BUSYBOX_CONFIG_FEATURE_INETD_RPC
+ bool "Support RPC services"
+ default BUSYBOX_DEFAULT_FEATURE_INETD_RPC # very rarely used, and needs Sun RPC support in libc
+ depends on BUSYBOX_CONFIG_INETD
+ help
+ Support Sun-RPC based services
config BUSYBOX_CONFIG_IP
- bool "ip"
+ bool "ip (35 kb)"
default BUSYBOX_DEFAULT_IP
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
The "ip" applet is a TCP/IP interface configuration and routing
- utility. You generally don't need "ip" to use busybox with
- TCP/IP.
+ utility.
+ Short forms (enabled below) are busybox-specific extensions.
+ The standard "ip" utility does not provide them. If you are
+ trying to be portable, it's better to use "ip CMD" forms.
config BUSYBOX_CONFIG_IPADDR
- bool "ipaddr"
+ bool "ipaddr (14 kb)"
default BUSYBOX_DEFAULT_IPADDR
select BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Support short form of ip addr: ipaddr
+ Short form of "ip addr"
config BUSYBOX_CONFIG_IPLINK
- bool "iplink"
+ bool "iplink (17 kb)"
default BUSYBOX_DEFAULT_IPLINK
select BUSYBOX_CONFIG_FEATURE_IP_LINK
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Support short form of ip link: iplink
+ Short form of "ip link"
config BUSYBOX_CONFIG_IPROUTE
- bool "iproute"
+ bool "iproute (15 kb)"
default BUSYBOX_DEFAULT_IPROUTE
select BUSYBOX_CONFIG_FEATURE_IP_ROUTE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Support short form of ip route: iproute
+ Short form of "ip route"
config BUSYBOX_CONFIG_IPTUNNEL
- bool "iptunnel"
+ bool "iptunnel (9.6 kb)"
default BUSYBOX_DEFAULT_IPTUNNEL
select BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Support short form of ip tunnel: iptunnel
+ Short form of "ip tunnel"
config BUSYBOX_CONFIG_IPRULE
- bool "iprule"
+ bool "iprule (10 kb)"
default BUSYBOX_DEFAULT_IPRULE
select BUSYBOX_CONFIG_FEATURE_IP_RULE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Support short form of ip rule: iprule
+ Short form of "ip rule"
config BUSYBOX_CONFIG_IPNEIGH
- bool "ipneigh"
+ bool "ipneigh (8.3 kb)"
default BUSYBOX_DEFAULT_IPNEIGH
select BUSYBOX_CONFIG_FEATURE_IP_NEIGH
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- Support short form of ip neigh: ipneigh
+ Short form of "ip neigh"
config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
bool "ip address"
Ethernet, wireless, infrared, ppp/slip, ip tunnelling
link types are supported without this option selected.
config BUSYBOX_CONFIG_IPCALC
- bool "ipcalc"
+ bool "ipcalc (4.4 kb)"
default BUSYBOX_DEFAULT_IPCALC
help
ipcalc takes an IP address and netmask and calculates the
Adds the options hostname, prefix and silent to the output of
"ipcalc".
config BUSYBOX_CONFIG_FAKEIDENTD
- bool "fakeidentd"
+ bool "fakeidentd (8.7 kb)"
default BUSYBOX_DEFAULT_FAKEIDENTD
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
fakeidentd listens on the ident port and returns a predefined
fake value on any query.
config BUSYBOX_CONFIG_NAMEIF
- bool "nameif"
+ bool "nameif (6.6 kb)"
default BUSYBOX_DEFAULT_NAMEIF
select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_FEATURE_SYSLOG
Maximum interface name length: IFNAMSIZ = 16
File fields are separated by space or tab.
File format:
- # Comment
- new_interface_name XX:XX:XX:XX:XX:XX
+ # Comment
+ new_interface_name XX:XX:XX:XX:XX:XX
config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED
bool "Extended nameif"
This extends the nameif syntax to support the bus_info, driver,
phyaddr selectors. The syntax is compatible to the normal nameif.
File format:
- new_interface_name driver=asix bus=usb-0000:00:08.2-3
- new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5
- new_interface_name phy_address=2 00:80:C8:38:91:B5
- new_interface_name mac=00:80:C8:38:91:B5
- new_interface_name 00:80:C8:38:91:B5
+ new_interface_name driver=asix bus=usb-0000:00:08.2-3
+ new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5
+ new_interface_name phy_address=2 00:80:C8:38:91:B5
+ new_interface_name mac=00:80:C8:38:91:B5
+ new_interface_name 00:80:C8:38:91:B5
config BUSYBOX_CONFIG_NBDCLIENT
- bool "nbd-client"
+ bool "nbd-client (6 kb)"
default BUSYBOX_DEFAULT_NBDCLIENT
help
Network block device client
config BUSYBOX_CONFIG_NC
- bool "nc"
+ bool "nc (11 kb)"
default BUSYBOX_DEFAULT_NC
help
A simple Unix utility which reads and writes data across network
connections.
+config BUSYBOX_CONFIG_NETCAT
+ bool "netcat (11 kb)"
+ default BUSYBOX_DEFAULT_NETCAT
+ help
+ Alias to nc.
+
config BUSYBOX_CONFIG_NC_SERVER
bool "Netcat server options (-l)"
default BUSYBOX_DEFAULT_NC_SERVER
- depends on BUSYBOX_CONFIG_NC
+ depends on BUSYBOX_CONFIG_NC || BUSYBOX_CONFIG_NETCAT
help
Allow netcat to act as a server.
config BUSYBOX_CONFIG_NC_EXTRA
bool "Netcat extensions (-eiw and -f FILE)"
default BUSYBOX_DEFAULT_NC_EXTRA
- depends on BUSYBOX_CONFIG_NC
+ depends on BUSYBOX_CONFIG_NC || BUSYBOX_CONFIG_NETCAT
help
Add -e (support for executing the rest of the command line after
making or receiving a successful connection), -i (delay interval for
config BUSYBOX_CONFIG_NC_110_COMPAT
bool "Netcat 1.10 compatibility (+2.5k)"
- default BUSYBOX_DEFAULT_NC_110_COMPAT # off specially for Rob
- depends on BUSYBOX_CONFIG_NC
+ default BUSYBOX_DEFAULT_NC_110_COMPAT
+ depends on BUSYBOX_CONFIG_NC || BUSYBOX_CONFIG_NETCAT
help
This option makes nc closely follow original nc-1.10.
The code is about 2.5k bigger. It enables
bool "netmsg"
default BUSYBOX_DEFAULT_NETMSG
help
- simple program for sending udp broadcast messages
+ simple program for sending udp broadcast messages
config BUSYBOX_CONFIG_NETSTAT
- bool "netstat"
+ bool "netstat (10 kb)"
default BUSYBOX_DEFAULT_NETSTAT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Add support for -p flag to print out PID and program name.
+700 bytes of code.
config BUSYBOX_CONFIG_NSLOOKUP
- bool "nslookup"
+ bool "nslookup (9.7 kb)"
default BUSYBOX_DEFAULT_NSLOOKUP
help
nslookup is a tool to query Internet name servers.
+
+config BUSYBOX_CONFIG_FEATURE_NSLOOKUP_BIG
+ bool "Use internal resolver code instead of libc"
+ depends on BUSYBOX_CONFIG_NSLOOKUP
+ default BUSYBOX_DEFAULT_FEATURE_NSLOOKUP_BIG
+
+config BUSYBOX_CONFIG_FEATURE_NSLOOKUP_LONG_OPTIONS
+ bool "Enable long options"
+ default BUSYBOX_DEFAULT_FEATURE_NSLOOKUP_LONG_OPTIONS
+ depends on BUSYBOX_CONFIG_FEATURE_NSLOOKUP_BIG && BUSYBOX_CONFIG_LONG_OPTS
config BUSYBOX_CONFIG_NSLOOKUP_OPENWRT
- bool "nslookup_lede"
+ bool "nslookup_openwrt"
depends on !BUSYBOX_CONFIG_NSLOOKUP
default BUSYBOX_DEFAULT_NSLOOKUP_OPENWRT
help
- nslookup is a tool to query Internet name servers (OpenWrt flavor).
+ nslookup is a tool to query Internet name servers (LEDE flavor).
config BUSYBOX_CONFIG_FEATURE_NSLOOKUP_OPENWRT_LONG_OPTIONS
bool "Enable long options"
help
Support long options for the nslookup applet.
config BUSYBOX_CONFIG_NTPD
- bool "ntpd"
+ bool "ntpd (22 kb)"
default BUSYBOX_DEFAULT_NTPD
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
help
Make ntpd look in /etc/ntp.conf for peers. Only "server address"
is supported.
+
+config BUSYBOX_CONFIG_FEATURE_NTP_AUTH
+ bool "Support md5/sha1 message authentication codes"
+ default BUSYBOX_DEFAULT_FEATURE_NTP_AUTH
+ depends on BUSYBOX_CONFIG_NTPD
config BUSYBOX_CONFIG_PING
- bool "ping"
+ bool "ping (10 kb)"
default BUSYBOX_DEFAULT_PING
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
elicit an ICMP ECHO_RESPONSE from a host or gateway.
config BUSYBOX_CONFIG_PING6
- bool "ping6"
+ bool "ping6 (11 kb)"
default BUSYBOX_DEFAULT_PING6
depends on BUSYBOX_CONFIG_FEATURE_IPV6
help
- This will give you a ping that can talk IPv6.
+ Alias to "ping -6".
config BUSYBOX_CONFIG_FEATURE_FANCY_PING
bool "Enable fancy ping output"
default BUSYBOX_DEFAULT_FEATURE_FANCY_PING
depends on BUSYBOX_CONFIG_PING || BUSYBOX_CONFIG_PING6
help
- Make the output from the ping applet include statistics, and at the
- same time provide full support for ICMP packets.
+ With this option off, ping will say "HOST is alive!"
+ or terminate with SIGALRM in 5 seconds otherwise.
+ No command-line options will be recognized.
config BUSYBOX_CONFIG_PSCAN
- bool "pscan"
+ bool "pscan (6 kb)"
default BUSYBOX_DEFAULT_PSCAN
help
Simple network port scanner.
config BUSYBOX_CONFIG_ROUTE
- bool "route"
+ bool "route (8.7 kb)"
default BUSYBOX_DEFAULT_ROUTE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Route displays or manipulates the kernel's IP routing tables.
config BUSYBOX_CONFIG_SLATTACH
- bool "slattach"
+ bool "slattach (6.2 kb)"
default BUSYBOX_DEFAULT_SLATTACH
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- slattach is a small utility to attach network interfaces to serial
- lines.
+ slattach configures serial line as SLIP network interface.
config BUSYBOX_CONFIG_SSL_CLIENT
- bool "ssl_client"
+ bool "ssl_client (25 kb)"
default BUSYBOX_DEFAULT_SSL_CLIENT
select BUSYBOX_CONFIG_TLS
help
This tool pipes data to/from a socket, TLS-encrypting it.
+config BUSYBOX_CONFIG_TC
+ bool "tc (8.3 kb)"
+ default BUSYBOX_DEFAULT_TC
+ help
+ Show / manipulate traffic control settings
+
+config BUSYBOX_CONFIG_FEATURE_TC_INGRESS
+ bool "Enable ingress"
+ default BUSYBOX_DEFAULT_FEATURE_TC_INGRESS
+ depends on BUSYBOX_CONFIG_TC
config BUSYBOX_CONFIG_TCPSVD
- bool "tcpsvd"
+ bool "tcpsvd (14 kb)"
default BUSYBOX_DEFAULT_TCPSVD
help
tcpsvd listens on a TCP port and runs a program for each new
connection.
config BUSYBOX_CONFIG_UDPSVD
- bool "udpsvd"
+ bool "udpsvd (13 kb)"
default BUSYBOX_DEFAULT_UDPSVD
help
udpsvd listens on an UDP port and runs a program for each new
connection.
config BUSYBOX_CONFIG_TELNET
- bool "telnet"
+ bool "telnet (8.8 kb)"
default BUSYBOX_DEFAULT_TELNET
help
Telnet is an interface to the TELNET protocol, but is also commonly
Setting this option will forward the USER environment variable to the
remote host you are connecting to. This is useful when you need to
log into a machine without telling the username (autologin). This
- option enables `-a' and `-l USER' arguments.
+ option enables '-a' and '-l USER' options.
config BUSYBOX_CONFIG_FEATURE_TELNET_WIDTH
bool "Enable window size autodetection"
default BUSYBOX_DEFAULT_FEATURE_TELNET_WIDTH
depends on BUSYBOX_CONFIG_TELNET
config BUSYBOX_CONFIG_TELNETD
- bool "telnetd"
+ bool "telnetd (12 kb)"
default BUSYBOX_DEFAULT_TELNETD
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
You need to be sure that busybox has LOGIN and
FEATURE_SUID enabled. And finally, you should make
- certain that Busybox has been installed setuid root:
+ certain that busybox has been installed setuid root:
chown root.root /bin/busybox
chmod 4755 /bin/busybox
way of running tcp services, including telnetd.
You most probably want to say N here.
config BUSYBOX_CONFIG_TFTP
- bool "tftp"
+ bool "tftp (11 kb)"
default BUSYBOX_DEFAULT_TFTP
help
- This enables the Trivial File Transfer Protocol client program. TFTP
- is usually used for simple, small transfers such as a root image
+ Trivial File Transfer Protocol client. TFTP is usually used
+ for simple, small transfers such as a root image
for a network-enabled bootloader.
+config BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR
+ bool "Enable progress bar"
+ default BUSYBOX_DEFAULT_FEATURE_TFTP_PROGRESS_BAR
+ depends on BUSYBOX_CONFIG_TFTP
+
config BUSYBOX_CONFIG_TFTPD
- bool "tftpd"
+ bool "tftpd (10 kb)"
default BUSYBOX_DEFAULT_TFTPD
help
- This enables the Trivial File Transfer Protocol server program.
+ Trivial File Transfer Protocol server.
It expects that stdin is a datagram socket and a packet
is already pending on it. It will exit after one transfer.
In other words: it should be run from inetd in nowait mode,
or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR"
-comment "Common options for tftp/tftpd"
- depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
-
config BUSYBOX_CONFIG_FEATURE_TFTP_GET
bool "Enable 'tftp get' and/or tftpd upload code"
default BUSYBOX_DEFAULT_FEATURE_TFTP_GET
Allow tftp to specify block size, and tftpd to understand
"blksize" and "tsize" options.
-config BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR
- bool "Enable progress bar"
- default BUSYBOX_DEFAULT_FEATURE_TFTP_PROGRESS_BAR
- depends on BUSYBOX_CONFIG_TFTP && BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
-
config BUSYBOX_CONFIG_TFTP_DEBUG
bool "Enable debug"
default BUSYBOX_DEFAULT_TFTP_DEBUG
bool #No description makes it a hidden option
default BUSYBOX_DEFAULT_TLS
config BUSYBOX_CONFIG_TRACEROUTE
- bool "traceroute"
+ bool "traceroute (11 kb)"
default BUSYBOX_DEFAULT_TRACEROUTE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Utility to trace the route of IP packets.
config BUSYBOX_CONFIG_TRACEROUTE6
- bool "traceroute6"
+ bool "traceroute6 (13 kb)"
default BUSYBOX_DEFAULT_TRACEROUTE6
depends on BUSYBOX_CONFIG_FEATURE_IPV6
help
default BUSYBOX_DEFAULT_FEATURE_TRACEROUTE_USE_ICMP
depends on BUSYBOX_CONFIG_TRACEROUTE || BUSYBOX_CONFIG_TRACEROUTE6
config BUSYBOX_CONFIG_TUNCTL
- bool "tunctl"
+ bool "tunctl (6.2 kb)"
default BUSYBOX_DEFAULT_TUNCTL
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Allow to specify owner and group of newly created interface.
340 bytes of pure bloat. Say no here.
config BUSYBOX_CONFIG_VCONFIG
- bool "vconfig"
+ bool "vconfig (2.3 kb)"
default BUSYBOX_DEFAULT_VCONFIG
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Creates, removes, and configures VLAN interfaces
config BUSYBOX_CONFIG_WGET
- bool "wget"
+ bool "wget (38 kb)"
default BUSYBOX_DEFAULT_WGET
help
wget is a utility for non-interactive download of files from HTTP
(if you enabled it); if openssl can be executed but fails later,
wget can't detect this, and download will fail.
config BUSYBOX_CONFIG_WHOIS
- bool "whois"
+ bool "whois (6.3 kb)"
default BUSYBOX_DEFAULT_WHOIS
help
whois is a client for the whois directory service
config BUSYBOX_CONFIG_ZCIP
- bool "zcip"
+ bool "zcip (8.4 kb)"
default BUSYBOX_DEFAULT_ZCIP
select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_FEATURE_SYSLOG
# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
+# see docs/Kconfig-language.txt.
#
-config BUSYBOX_CONFIG_UDHCPC6
- bool "udhcpc6 (DHCPv6 client, EXPERIMENTAL)"
- default BUSYBOX_DEFAULT_UDHCPC6 # not yet ready
- depends on BUSYBOX_CONFIG_FEATURE_IPV6
- help
- udhcpc6 is a DHCPv6 client
-
-config BUSYBOX_CONFIG_FEATURE_UDHCPC6_RFC3646
- bool "Support RFC 3646 (DNS server and search list)"
- default BUSYBOX_DEFAULT_FEATURE_UDHCPC6_RFC3646
- depends on BUSYBOX_CONFIG_UDHCPC6
- help
- List of DNS servers and domain search list can be requested with
- "-O dns" and "-O search". If server gives these values,
- they will be set in environment variables "dns" and "search".
-
-config BUSYBOX_CONFIG_FEATURE_UDHCPC6_RFC4704
- bool "Support RFC 4704 (Client FQDN)"
- default BUSYBOX_DEFAULT_FEATURE_UDHCPC6_RFC4704
- depends on BUSYBOX_CONFIG_UDHCPC6
- help
- You can request FQDN to be given by server using "-O fqdn".
-
-config BUSYBOX_CONFIG_FEATURE_UDHCPC6_RFC4833
- bool "Support RFC 4833 (Timezones)"
- default BUSYBOX_DEFAULT_FEATURE_UDHCPC6_RFC4833
- depends on BUSYBOX_CONFIG_UDHCPC6
- help
- You can request POSIX timezone with "-O tz" and timezone name
- with "-O timezone".
-
config BUSYBOX_CONFIG_UDHCPD
- bool "udhcpd (DHCP server)"
+ bool "udhcpd (21 kb)"
default BUSYBOX_DEFAULT_UDHCPD
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
udhcpd is a DHCP server geared primarily toward embedded systems,
while striving to be fully functional and RFC compliant.
-config BUSYBOX_CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY
- bool "Rewrite the lease file at every new acknowledge"
- default BUSYBOX_DEFAULT_FEATURE_UDHCPD_WRITE_LEASES_EARLY
- depends on BUSYBOX_CONFIG_UDHCPD
- help
- If selected, udhcpd will write a new file with leases every
- time a new lease has been accepted, thus eliminating the need
- to send SIGUSR1 for the initial writing or updating. Any timed
- rewriting remains undisturbed.
-
config BUSYBOX_CONFIG_FEATURE_UDHCPD_BASE_IP_ON_MAC
bool "Select IP address based on client MAC"
default BUSYBOX_DEFAULT_FEATURE_UDHCPD_BASE_IP_ON_MAC
for the same client to (almost always) contain the same
IP address.
+config BUSYBOX_CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY
+ bool "Rewrite lease file at every new acknowledge"
+ default BUSYBOX_DEFAULT_FEATURE_UDHCPD_WRITE_LEASES_EARLY
+ depends on BUSYBOX_CONFIG_UDHCPD
+ help
+ If selected, udhcpd will write a new file with leases every
+ time a new lease has been accepted, thus eliminating the need
+ to send SIGUSR1 for the initial writing or updating. Any timed
+ rewriting remains undisturbed.
+
config BUSYBOX_CONFIG_DHCPD_LEASES_FILE
string "Absolute path to lease file"
default BUSYBOX_DEFAULT_DHCPD_LEASES_FILE
of the file. Normally it is safe to leave it untouched.
config BUSYBOX_CONFIG_DUMPLEASES
- bool "dumpleases"
+ bool "dumpleases (5.1 kb)"
default BUSYBOX_DEFAULT_DUMPLEASES
help
dumpleases displays the leases written out by the udhcpd.
by the absolute time that it expires in seconds from epoch.
config BUSYBOX_CONFIG_DHCPRELAY
- bool "dhcprelay"
+ bool "dhcprelay (5.2 kb)"
default BUSYBOX_DEFAULT_DHCPRELAY
help
- dhcprelay listens for dhcp requests on one or more interfaces
- and forwards these requests to a different interface or dhcp
+ dhcprelay listens for DHCP requests on one or more interfaces
+ and forwards these requests to a different interface or DHCP
server.
config BUSYBOX_CONFIG_UDHCPC
- bool "udhcpc (DHCP client)"
+ bool "udhcpc (24 kb)"
default BUSYBOX_DEFAULT_UDHCPC
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
config BUSYBOX_CONFIG_UDHCPC_DEFAULT_SCRIPT
string "Absolute path to config script"
default BUSYBOX_DEFAULT_UDHCPC_DEFAULT_SCRIPT
- depends on BUSYBOX_CONFIG_UDHCPC
+ depends on BUSYBOX_CONFIG_UDHCPC || BUSYBOX_CONFIG_UDHCPC6
help
This script is called after udhcpc receives an answer. See
examples/udhcp for a working example. Normally it is safe
to leave this untouched.
+# udhcpc6 config is inserted here:
+config BUSYBOX_CONFIG_UDHCPC6
+ bool "udhcpc6 (21 kb)"
+ default BUSYBOX_DEFAULT_UDHCPC6 # not yet ready
+ depends on BUSYBOX_CONFIG_FEATURE_IPV6
+ help
+ udhcpc6 is a DHCPv6 client
+
+config BUSYBOX_CONFIG_FEATURE_UDHCPC6_RFC3646
+ bool "Support RFC 3646 (DNS server and search list)"
+ default BUSYBOX_DEFAULT_FEATURE_UDHCPC6_RFC3646
+ depends on BUSYBOX_CONFIG_UDHCPC6
+ help
+ List of DNS servers and domain search list can be requested with
+ "-O dns" and "-O search". If server gives these values,
+ they will be set in environment variables "dns" and "search".
+
+config BUSYBOX_CONFIG_FEATURE_UDHCPC6_RFC4704
+ bool "Support RFC 4704 (Client FQDN)"
+ default BUSYBOX_DEFAULT_FEATURE_UDHCPC6_RFC4704
+ depends on BUSYBOX_CONFIG_UDHCPC6
+ help
+ You can request FQDN to be given by server using "-O fqdn".
+
+config BUSYBOX_CONFIG_FEATURE_UDHCPC6_RFC4833
+ bool "Support RFC 4833 (Timezones)"
+ default BUSYBOX_DEFAULT_FEATURE_UDHCPC6_RFC4833
+ depends on BUSYBOX_CONFIG_UDHCPC6
+ help
+ You can request POSIX timezone with "-O tz" and timezone name
+ with "-O timezone".
+
+config BUSYBOX_CONFIG_FEATURE_UDHCPC6_RFC5970
+ bool "Support RFC 5970 (Network Boot)"
+ default BUSYBOX_DEFAULT_FEATURE_UDHCPC6_RFC5970
+ depends on BUSYBOX_CONFIG_UDHCPC6
+ help
+ You can request bootfile-url with "-O bootfile_url" and
+ bootfile-params with "-O bootfile_params".
+
+comment "Common options for DHCP applets"
+ depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC || BUSYBOX_CONFIG_UDHCPC6 || BUSYBOX_CONFIG_DHCPRELAY
+
config BUSYBOX_CONFIG_FEATURE_UDHCP_PORT
bool "Enable '-P port' option for udhcpd and udhcpc"
default BUSYBOX_DEFAULT_FEATURE_UDHCP_PORT
- depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
+ depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC || BUSYBOX_CONFIG_UDHCPC6
help
At the cost of ~300 bytes, enables -P port option.
This feature is typically not needed.
config BUSYBOX_CONFIG_UDHCP_DEBUG
- int "Maximum verbosity level for udhcp applets (0..9)"
+ int "Maximum verbosity level (0..9)"
default BUSYBOX_DEFAULT_UDHCP_DEBUG
range 0 9
- depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC || BUSYBOX_CONFIG_DHCPRELAY
+ depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC || BUSYBOX_CONFIG_UDHCPC6 || BUSYBOX_CONFIG_DHCPRELAY
help
Verbosity can be increased with multiple -v options.
This option controls how high it can be cranked up.
Bigger values result in bigger code. Levels above 1
are very verbose and useful for debugging only.
-config BUSYBOX_CONFIG_FEATURE_UDHCP_RFC3397
- bool "Support RFC3397 domain search (experimental)"
- default BUSYBOX_DEFAULT_FEATURE_UDHCP_RFC3397
- depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
- help
- If selected, both client and server will support passing of domain
- search lists via option 119, specified in RFC 3397,
- and SIP servers option 120, specified in RFC 3361.
-
-config BUSYBOX_CONFIG_FEATURE_UDHCP_8021Q
- bool "Support 802.1Q VLAN parameters"
- default BUSYBOX_DEFAULT_FEATURE_UDHCP_8021Q
- depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
- help
- If selected, both client and server will support passing of VLAN
- ID and priority via options 132 and 133 as per 802.1Q.
-
config BUSYBOX_CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS
int "DHCP options slack buffer size"
default BUSYBOX_DEFAULT_UDHCPC_SLACK_FOR_BUGGY_SERVERS
field larger than we expect (which might also be considered a
buffer overflow attempt). These packets are normally discarded.
If circumstances beyond your control force you to support such
- servers, this may help. The upper limit (924) makes dhcpc accept
+ servers, this may help. The upper limit (924) makes udhcpc accept
even 1500 byte packets (maximum-sized ethernet packets).
- This option does not make dhcp[cd] emit non-standard
+ This option does not make udhcp[cd] emit non-standard
sized packets.
Known buggy DHCP servers:
3Com OfficeConnect Remote 812 ADSL Router:
- seems to confuse maximum allowed UDP packet size with
- maximum size of entire IP packet, and sends packets which are
- 28 bytes too large.
+ seems to confuse maximum allowed UDP packet size with
+ maximum size of entire IP packet, and sends packets
+ which are 28 bytes too large.
Seednet (ISP) VDSL: sends packets 2 bytes too large.
+
+config BUSYBOX_CONFIG_FEATURE_UDHCP_RFC3397
+ bool "Support RFC 3397 domain search options"
+ default BUSYBOX_DEFAULT_FEATURE_UDHCP_RFC3397
+ depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
+ help
+ If selected, both client and server will support passing of domain
+ search lists via option 119, specified in RFC 3397,
+ and SIP servers option 120, specified in RFC 3361.
+
+config BUSYBOX_CONFIG_FEATURE_UDHCP_8021Q
+ bool "Support 802.1Q VLAN parameters options"
+ default BUSYBOX_DEFAULT_FEATURE_UDHCP_8021Q
+ depends on BUSYBOX_CONFIG_UDHCPD || BUSYBOX_CONFIG_UDHCPC
+ help
+ If selected, both client and server will support passing of VLAN
+ ID and priority via options 132 and 133 as per 802.1Q.
# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
+# see docs/Kconfig-language.txt.
#
menu "Print Utilities"
config BUSYBOX_CONFIG_LPD
- bool "lpd"
+ bool "lpd (5.5 kb)"
default BUSYBOX_DEFAULT_LPD
help
lpd is a print spooling daemon.
config BUSYBOX_CONFIG_LPR
- bool "lpr"
+ bool "lpr (9.9 kb)"
default BUSYBOX_DEFAULT_LPR
help
lpr sends files (or standard input) to a print spooling daemon.
config BUSYBOX_CONFIG_LPQ
- bool "lpq"
+ bool "lpq (9.9 kb)"
default BUSYBOX_DEFAULT_LPQ
help
lpq is a print spool queue examination and manipulation program.
# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
+# see docs/Kconfig-language.txt.
#
menu "Process Utilities"
config BUSYBOX_CONFIG_FREE
- bool "free"
+ bool "free (3.1 kb)"
default BUSYBOX_DEFAULT_FREE
select BUSYBOX_CONFIG_PLATFORM_LINUX #sysinfo()
help
memory in the system, as well as the buffers used by the kernel.
The shared memory column should be ignored; it is obsolete.
config BUSYBOX_CONFIG_FUSER
- bool "fuser"
+ bool "fuser (7 kb)"
default BUSYBOX_DEFAULT_FUSER
help
fuser lists all PIDs (Process IDs) that currently have a given
file open. fuser can also list all PIDs that have a given network
(TCP or UDP) port open.
config BUSYBOX_CONFIG_IOSTAT
- bool "iostat"
+ bool "iostat (7.6 kb)"
default BUSYBOX_DEFAULT_IOSTAT
help
Report CPU and I/O statistics
config BUSYBOX_CONFIG_KILL
- bool "kill"
+ bool "kill (3.1 kb)"
default BUSYBOX_DEFAULT_KILL
help
The command kill sends the specified signal to the specified
signal is sent.
config BUSYBOX_CONFIG_KILLALL
- bool "killall"
+ bool "killall (5.6 kb)"
default BUSYBOX_DEFAULT_KILLALL
help
killall sends a signal to all processes running any of the
sent.
config BUSYBOX_CONFIG_KILLALL5
- bool "killall5"
+ bool "killall5 (5.3 kb)"
default BUSYBOX_DEFAULT_KILLALL5
help
The SystemV killall command. killall5 sends a signal
in its own session, so it won't kill the shell that is running
the script it was called from.
config BUSYBOX_CONFIG_LSOF
- bool "lsof"
+ bool "lsof (3.4 kb)"
default BUSYBOX_DEFAULT_LSOF
help
Show open files in the format of:
PID <TAB> /path/to/executable <TAB> /path/to/opened/file
config BUSYBOX_CONFIG_MPSTAT
- bool "mpstat"
+ bool "mpstat (9.8 kb)"
default BUSYBOX_DEFAULT_MPSTAT
help
Per-processor statistics
config BUSYBOX_CONFIG_NMETER
- bool "nmeter"
+ bool "nmeter (11 kb)"
default BUSYBOX_DEFAULT_NMETER
help
Prints selected system stats continuously, one line per update.
config BUSYBOX_CONFIG_PGREP
- bool "pgrep"
+ bool "pgrep (6.5 kb)"
default BUSYBOX_DEFAULT_PGREP
help
Look for processes by name.
config BUSYBOX_CONFIG_PKILL
- bool "pkill"
+ bool "pkill (7.5 kb)"
default BUSYBOX_DEFAULT_PKILL
help
Send signals to processes by name.
config BUSYBOX_CONFIG_PIDOF
- bool "pidof"
+ bool "pidof (6.3 kb)"
default BUSYBOX_DEFAULT_PIDOF
help
Pidof finds the process id's (pids) of the named programs. It prints
The special pid %PPID can be used to name the parent process
of the pidof, in other words the calling shell or shell script.
config BUSYBOX_CONFIG_PMAP
- bool "pmap"
- default BUSYBOX_DEFAULT_PMAP
- help
- Display processes' memory mappings.
+ bool "pmap (6 kb)"
+ default BUSYBOX_DEFAULT_PMAP
+ help
+ Display processes' memory mappings.
config BUSYBOX_CONFIG_POWERTOP
- bool "powertop"
+ bool "powertop (9.6 kb)"
default BUSYBOX_DEFAULT_POWERTOP
help
Analyze power consumption on Intel-based laptops
Without this, powertop will only refresh display every 10 seconds.
No keyboard commands will work, only ^C to terminate.
config BUSYBOX_CONFIG_PS
- bool "ps"
+ bool "ps (11 kb)"
default BUSYBOX_DEFAULT_PS
help
ps gives a snapshot of the current processes.
config BUSYBOX_CONFIG_FEATURE_PS_WIDE
- bool "Enable wide output option (-w)"
+ bool "Enable wide output (-w)"
default BUSYBOX_DEFAULT_FEATURE_PS_WIDE
- depends on BUSYBOX_CONFIG_PS && !BUSYBOX_CONFIG_DESKTOP
+ depends on (BUSYBOX_CONFIG_PS || BUSYBOX_CONFIG_MINIPS) && !BUSYBOX_CONFIG_DESKTOP
help
Support argument 'w' for wide output.
If given once, 132 chars are printed, and if given more
than once, the length is unlimited.
config BUSYBOX_CONFIG_FEATURE_PS_LONG
- bool "Enable long output option (-l)"
+ bool "Enable long output (-l)"
default BUSYBOX_DEFAULT_FEATURE_PS_LONG
- depends on BUSYBOX_CONFIG_PS && !BUSYBOX_CONFIG_DESKTOP
+ depends on (BUSYBOX_CONFIG_PS || BUSYBOX_CONFIG_MINIPS) && !BUSYBOX_CONFIG_DESKTOP
help
Support argument 'l' for long output.
Adds fields PPID, RSS, START, TIME & TTY
config BUSYBOX_CONFIG_FEATURE_PS_TIME
- bool "Support -o time and -o etime output specifiers"
+ bool "Enable -o time and -o etime specifiers"
default BUSYBOX_DEFAULT_FEATURE_PS_TIME
- depends on BUSYBOX_CONFIG_PS && BUSYBOX_CONFIG_DESKTOP
+ depends on (BUSYBOX_CONFIG_PS || BUSYBOX_CONFIG_MINIPS) && BUSYBOX_CONFIG_DESKTOP
select BUSYBOX_CONFIG_PLATFORM_LINUX
config BUSYBOX_CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS
(if you are on Linux 2.4.0+ and use ELF, you don't need this)
config BUSYBOX_CONFIG_FEATURE_PS_ADDITIONAL_COLUMNS
- bool "Support -o rgroup, -o ruser, -o nice specifiers"
+ bool "Enable -o rgroup, -o ruser, -o nice specifiers"
default BUSYBOX_DEFAULT_FEATURE_PS_ADDITIONAL_COLUMNS
- depends on BUSYBOX_CONFIG_PS && BUSYBOX_CONFIG_DESKTOP
+ depends on (BUSYBOX_CONFIG_PS || BUSYBOX_CONFIG_MINIPS) && BUSYBOX_CONFIG_DESKTOP
config BUSYBOX_CONFIG_PSTREE
- bool "pstree"
+ bool "pstree (9.3 kb)"
default BUSYBOX_DEFAULT_PSTREE
help
Display a tree of processes.
config BUSYBOX_CONFIG_PWDX
- bool "pwdx"
+ bool "pwdx (3.7 kb)"
default BUSYBOX_DEFAULT_PWDX
help
Report current working directory of a process
config BUSYBOX_CONFIG_SMEMCAP
- bool "smemcap"
+ bool "smemcap (2.5 kb)"
default BUSYBOX_DEFAULT_SMEMCAP
help
smemcap is a tool for capturing process data for smem,
a memory usage statistic tool.
config BUSYBOX_CONFIG_BB_SYSCTL
- bool "sysctl"
+ bool "sysctl (7.4 kb)"
default BUSYBOX_DEFAULT_BB_SYSCTL
help
Configure kernel parameters at runtime.
config BUSYBOX_CONFIG_TOP
- bool "top"
+ bool "top (18 kb)"
default BUSYBOX_DEFAULT_TOP
help
The top program provides a dynamic real-time view of a running
help
Enable 's' in top (gives lots of memory info).
config BUSYBOX_CONFIG_UPTIME
- bool "uptime"
+ bool "uptime (3.7 kb)"
default BUSYBOX_DEFAULT_UPTIME
select BUSYBOX_CONFIG_PLATFORM_LINUX #sysinfo()
help
help
Display the number of users currently logged on.
config BUSYBOX_CONFIG_WATCH
- bool "watch"
+ bool "watch (4.4 kb)"
default BUSYBOX_DEFAULT_WATCH
help
watch is used to execute a program periodically, showing
# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
+# see docs/Kconfig-language.txt.
#
menu "Runit Utilities"
config BUSYBOX_CONFIG_CHPST
- bool "chpst"
+ bool "chpst (9 kb)"
default BUSYBOX_DEFAULT_CHPST
help
chpst changes the process state according to the given options, and
execs specified program.
config BUSYBOX_CONFIG_SETUIDGID
- bool "setuidgid"
+ bool "setuidgid (4 kb)"
default BUSYBOX_DEFAULT_SETUIDGID
help
Sets soft resource limits as specified by options
config BUSYBOX_CONFIG_ENVUIDGID
- bool "envuidgid"
+ bool "envuidgid (3.9 kb)"
default BUSYBOX_DEFAULT_ENVUIDGID
help
Sets $UID to account's uid and $GID to account's gid
config BUSYBOX_CONFIG_ENVDIR
- bool "envdir"
+ bool "envdir (2.5 kb)"
default BUSYBOX_DEFAULT_ENVDIR
help
Sets various environment variables as specified by files
in the given directory
config BUSYBOX_CONFIG_SOFTLIMIT
- bool "softlimit"
+ bool "softlimit (4.5 kb)"
default BUSYBOX_DEFAULT_SOFTLIMIT
help
Sets soft resource limits as specified by options
config BUSYBOX_CONFIG_RUNSV
- bool "runsv"
+ bool "runsv (7.8 kb)"
default BUSYBOX_DEFAULT_RUNSV
help
runsv starts and monitors a service and optionally an appendant log
service.
config BUSYBOX_CONFIG_RUNSVDIR
- bool "runsvdir"
+ bool "runsvdir (6.3 kb)"
default BUSYBOX_DEFAULT_RUNSVDIR
help
runsvdir starts a runsv process for each subdirectory, or symlink to
message (viewable via top/ps). Otherwise (feature is off
or no parameter), error messages go to stderr only.
config BUSYBOX_CONFIG_SV
- bool "sv"
+ bool "sv (8.5 kb)"
default BUSYBOX_DEFAULT_SV
help
sv reports the current status and controls the state of services
config BUSYBOX_CONFIG_SV_DEFAULT_SERVICE_DIR
string "Default directory for services"
default BUSYBOX_DEFAULT_SV_DEFAULT_SERVICE_DIR
- depends on BUSYBOX_CONFIG_SV
+ depends on BUSYBOX_CONFIG_SV || BUSYBOX_CONFIG_SVC || BUSYBOX_CONFIG_SVOK
help
Default directory for services.
Defaults to "/var/service"
config BUSYBOX_CONFIG_SVC
- bool "svc"
+ bool "svc (8.4 kb)"
default BUSYBOX_DEFAULT_SVC
help
svc controls the state of services monitored by the runsv supervisor.
- It is comaptible with daemontools command with the same name.
+ It is compatible with daemontools command with the same name.
+
+config BUSYBOX_CONFIG_SVOK
+ bool "svok (1.5 kb)"
+ default BUSYBOX_DEFAULT_SVOK
+ help
+ svok checks whether runsv supervisor is running.
+ It is compatible with daemontools command with the same name.
config BUSYBOX_CONFIG_SVLOGD
- bool "svlogd"
+ bool "svlogd (16 kb)"
default BUSYBOX_DEFAULT_SVLOGD
help
svlogd continuously reads log data from its standard input, optionally
# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
+# see docs/Kconfig-language.txt.
#
menu "SELinux Utilities"
depends on BUSYBOX_CONFIG_SELINUX
config BUSYBOX_CONFIG_CHCON
- bool "chcon"
+ bool "chcon (8.9 kb)"
default BUSYBOX_DEFAULT_CHCON
depends on BUSYBOX_CONFIG_SELINUX
help
Enable support to change the security context of file.
-
-config BUSYBOX_CONFIG_FEATURE_CHCON_LONG_OPTIONS
- bool "Enable long options"
- default BUSYBOX_DEFAULT_FEATURE_CHCON_LONG_OPTIONS
- depends on BUSYBOX_CONFIG_CHCON && BUSYBOX_CONFIG_LONG_OPTS
config BUSYBOX_CONFIG_GETENFORCE
- bool "getenforce"
+ bool "getenforce (1.7 kb)"
default BUSYBOX_DEFAULT_GETENFORCE
depends on BUSYBOX_CONFIG_SELINUX
help
Enable support to get the current mode of SELinux.
config BUSYBOX_CONFIG_GETSEBOOL
- bool "getsebool"
+ bool "getsebool (5.5 kb)"
default BUSYBOX_DEFAULT_GETSEBOOL
depends on BUSYBOX_CONFIG_SELINUX
help
Enable support to get SELinux boolean values.
config BUSYBOX_CONFIG_LOAD_POLICY
- bool "load_policy"
+ bool "load_policy (1.6 kb)"
default BUSYBOX_DEFAULT_LOAD_POLICY
depends on BUSYBOX_CONFIG_SELINUX
help
Enable support to load SELinux policy.
config BUSYBOX_CONFIG_MATCHPATHCON
- bool "matchpathcon"
+ bool "matchpathcon (6.1 kb)"
default BUSYBOX_DEFAULT_MATCHPATHCON
depends on BUSYBOX_CONFIG_SELINUX
help
Enable support to get default security context of the
specified path from the file contexts configuration.
config BUSYBOX_CONFIG_RUNCON
- bool "runcon"
+ bool "runcon (6.6 kb)"
default BUSYBOX_DEFAULT_RUNCON
depends on BUSYBOX_CONFIG_SELINUX
help
Enable support to run command in specified security context.
-
-config BUSYBOX_CONFIG_FEATURE_RUNCON_LONG_OPTIONS
- bool "Enable long options"
- default BUSYBOX_DEFAULT_FEATURE_RUNCON_LONG_OPTIONS
- depends on BUSYBOX_CONFIG_RUNCON && BUSYBOX_CONFIG_LONG_OPTS
config BUSYBOX_CONFIG_SELINUXENABLED
- bool "selinuxenabled"
+ bool "selinuxenabled (321 bytes)"
default BUSYBOX_DEFAULT_SELINUXENABLED
depends on BUSYBOX_CONFIG_SELINUX
help
Enable support for this command to be used within shell scripts
to determine if selinux is enabled.
config BUSYBOX_CONFIG_SESTATUS
- bool "sestatus"
+ bool "sestatus (12 kb)"
default BUSYBOX_DEFAULT_SESTATUS
depends on BUSYBOX_CONFIG_SELINUX
help
Displays the status of SELinux.
config BUSYBOX_CONFIG_SETENFORCE
- bool "setenforce"
+ bool "setenforce (2.1 kb)"
default BUSYBOX_DEFAULT_SETENFORCE
depends on BUSYBOX_CONFIG_SELINUX
help
Enable support to modify the mode SELinux is running in.
config BUSYBOX_CONFIG_SETFILES
- bool "setfiles"
+ bool "setfiles (13 kb)"
default BUSYBOX_DEFAULT_SETFILES
depends on BUSYBOX_CONFIG_SELINUX
help
the specified binary policy) for setfiles. Requires libsepol.
config BUSYBOX_CONFIG_RESTORECON
- bool "restorecon"
+ bool "restorecon (12 kb)"
default BUSYBOX_DEFAULT_RESTORECON
depends on BUSYBOX_CONFIG_SELINUX
help
Enable support to relabel files. The feature is almost
the same as setfiles, but usage is a little different.
config BUSYBOX_CONFIG_SETSEBOOL
- bool "setsebool"
+ bool "setsebool (1.7 kb)"
default BUSYBOX_DEFAULT_SETSEBOOL
depends on BUSYBOX_CONFIG_SELINUX
help
# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
+# see docs/Kconfig-language.txt.
#
menu "Shells"
config BUSYBOX_CONFIG_ASH
- bool "ash"
+ bool "ash (78 kb)"
default BUSYBOX_DEFAULT_ASH
depends on !BUSYBOX_CONFIG_NOMMU
help
- Tha 'ash' shell adds about 60k in the default configuration and is
- the most complete and most pedantically correct shell included with
+ The most complete and most pedantically correct shell included with
busybox. This shell is actually a derivative of the Debian 'dash'
shell (by Herbert Xu), which was created by porting the 'ash' shell
(written by Kenneth Almquist) from NetBSD.
default BUSYBOX_DEFAULT_ASH_BASH_COMPAT
depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH
+config BUSYBOX_CONFIG_ASH_BASH_SOURCE_CURDIR
+ bool "'source' and '.' builtins search current directory after $PATH"
+ default BUSYBOX_DEFAULT_ASH_BASH_SOURCE_CURDIR # do not encourage non-standard behavior
+ depends on BUSYBOX_CONFIG_ASH_BASH_COMPAT
+ help
+ This is not compliant with standards. Avoid if possible.
+
+config BUSYBOX_CONFIG_ASH_BASH_NOT_FOUND_HOOK
+ bool "command_not_found_handle hook support"
+ default BUSYBOX_DEFAULT_ASH_BASH_NOT_FOUND_HOOK
+ depends on BUSYBOX_CONFIG_ASH_BASH_COMPAT
+ help
+ Enable support for the 'command_not_found_handle' hook function,
+ from GNU bash, which allows for alternative command not found
+ handling.
+
config BUSYBOX_CONFIG_ASH_JOB_CONTROL
bool "Job control"
default BUSYBOX_DEFAULT_ASH_JOB_CONTROL
endif # ash options
config BUSYBOX_CONFIG_CTTYHACK
- bool "cttyhack"
+ bool "cttyhack (2.4 kb)"
default BUSYBOX_DEFAULT_CTTYHACK
help
One common problem reported on the mailing list is the "can't
# getty 115200 $(cttyhack)
config BUSYBOX_CONFIG_HUSH
- bool "hush"
+ bool "hush (68 kb)"
default BUSYBOX_DEFAULT_HUSH
help
- hush is a small shell (25k). It handles the normal flow control
+ hush is a small shell. It handles the normal flow control
constructs such as if/then/elif/else/fi, for/in/do/done, while loops,
case/esac. Redirections, here documents, $((arithmetic))
and functions are supported.
help
Enable {abc,def} extension.
+config BUSYBOX_CONFIG_HUSH_LINENO_VAR
+ bool "$LINENO variable"
+ default BUSYBOX_DEFAULT_HUSH_LINENO_VAR
+ depends on BUSYBOX_CONFIG_HUSH_BASH_COMPAT
+
+config BUSYBOX_CONFIG_HUSH_BASH_SOURCE_CURDIR
+ bool "'source' and '.' builtins search current directory after $PATH"
+ default BUSYBOX_DEFAULT_HUSH_BASH_SOURCE_CURDIR # do not encourage non-standard behavior
+ depends on BUSYBOX_CONFIG_HUSH_BASH_COMPAT
+ help
+ This is not compliant with standards. Avoid if possible.
+
config BUSYBOX_CONFIG_HUSH_INTERACTIVE
bool "Interactive mode"
default BUSYBOX_DEFAULT_HUSH_INTERACTIVE
but no separate process group is formed.
config BUSYBOX_CONFIG_HUSH_TICK
- bool "Support process substitution"
+ bool "Support command substitution"
default BUSYBOX_DEFAULT_HUSH_TICK
depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
help
help
export -n unexports variables. It is a bash extension.
+config BUSYBOX_CONFIG_HUSH_READONLY
+ bool "readonly builtin"
+ default BUSYBOX_DEFAULT_HUSH_READONLY
+ depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ help
+ Enable support for read-only variables.
+
config BUSYBOX_CONFIG_HUSH_KILL
bool "kill builtin (supports kill %jobspec)"
default BUSYBOX_DEFAULT_HUSH_KILL
default BUSYBOX_DEFAULT_HUSH_WAIT
depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+config BUSYBOX_CONFIG_HUSH_COMMAND
+ bool "command builtin"
+ default BUSYBOX_DEFAULT_HUSH_COMMAND
+ depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+
config BUSYBOX_CONFIG_HUSH_TRAP
bool "trap builtin"
default BUSYBOX_DEFAULT_HUSH_TRAP
default BUSYBOX_DEFAULT_HUSH_TYPE
depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+config BUSYBOX_CONFIG_HUSH_TIMES
+ bool "times builtin"
+ default BUSYBOX_DEFAULT_HUSH_TIMES
+ depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+
config BUSYBOX_CONFIG_HUSH_READ
bool "read builtin"
default BUSYBOX_DEFAULT_HUSH_READ
default BUSYBOX_DEFAULT_HUSH_UMASK
depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+config BUSYBOX_CONFIG_HUSH_GETOPTS
+ bool "getopts builtin"
+ default BUSYBOX_DEFAULT_HUSH_GETOPTS
+ depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+
config BUSYBOX_CONFIG_HUSH_MEMLEAK
bool "memleak builtin (debugging)"
default BUSYBOX_DEFAULT_HUSH_MEMLEAK
depends on BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
-config BUSYBOX_CONFIG_MSH
- bool "msh (deprecated: aliased to hush)"
- default BUSYBOX_DEFAULT_MSH
- select BUSYBOX_CONFIG_HUSH
- help
- msh is deprecated and will be removed, please migrate to hush.
-
comment "Options common to all shells"
if ASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
This feature is relatively new. Use with care. Report bugs
to project mailing list.
+config BUSYBOX_CONFIG_FEATURE_SH_READ_FRAC
+ bool "read -t N.NNN support (+110 bytes)"
+ default BUSYBOX_DEFAULT_FEATURE_SH_READ_FRAC
+ depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ help
+ Enable support for fractional second timeout in read builtin.
+
config BUSYBOX_CONFIG_FEATURE_SH_HISTFILESIZE
bool "Use $HISTFILESIZE"
default BUSYBOX_DEFAULT_FEATURE_SH_HISTFILESIZE
to set shell history size. Note that its max value is capped
by "History size" setting in library tuning section.
+config BUSYBOX_CONFIG_FEATURE_SH_EMBEDDED_SCRIPTS
+ bool "Embed scripts in the binary"
+ default BUSYBOX_DEFAULT_FEATURE_SH_EMBEDDED_SCRIPTS
+ depends on BUSYBOX_CONFIG_ASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_SH_IS_ASH || BUSYBOX_CONFIG_BASH_IS_ASH || BUSYBOX_CONFIG_SH_IS_HUSH || BUSYBOX_CONFIG_BASH_IS_HUSH
+ help
+ Allow scripts to be compressed and embedded in the busybox
+ binary. The scripts should be placed in the 'embed' directory
+ at build time. Like applets, scripts can be run as
+ 'busybox SCRIPT ...' or by linking their name to the binary.
+
+ This also allows applets to be implemented as scripts: place
+ the script in 'applets_sh' and a stub C file containing
+ configuration in the appropriate subsystem directory.
+
endif # Options common to all shells
endmenu
# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
+# see docs/Kconfig-language.txt.
#
menu "System Logging Utilities"
config BUSYBOX_CONFIG_KLOGD
- bool "klogd"
+ bool "klogd (5.7 kb)"
default BUSYBOX_DEFAULT_KLOGD
help
klogd is a utility which intercepts and logs all
If in doubt, say 'Y'.
config BUSYBOX_CONFIG_LOGGER
- bool "logger"
+ bool "logger (6.3 kb)"
default BUSYBOX_DEFAULT_LOGGER
select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
- The logger utility allows you to send arbitrary text
- messages to the system log (i.e. the 'syslogd' utility) so
- they can be logged. This is generally used to help locate
- problems that occur within programs and scripts.
+ The logger utility allows you to send arbitrary text
+ messages to the system log (i.e. the 'syslogd' utility) so
+ they can be logged. This is generally used to help locate
+ problems that occur within programs and scripts.
config BUSYBOX_CONFIG_LOGREAD
- bool "logread"
+ bool "logread (4.8 kb)"
default BUSYBOX_DEFAULT_LOGREAD
help
If you enabled Circular Buffer support, you almost
contention at some minor memory expense.
config BUSYBOX_CONFIG_SYSLOGD
- bool "syslogd"
+ bool "syslogd (13 kb)"
default BUSYBOX_DEFAULT_SYSLOGD
help
The syslogd utility is used to record logs of all the
# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
+# see docs/Kconfig-language.txt.
#
menu "Linux System Utilities"
config BUSYBOX_CONFIG_ACPID
- bool "acpid"
+ bool "acpid (9 kb)"
default BUSYBOX_DEFAULT_ACPID
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
help
Accept and ignore compatibility options -g -m -s -S -v.
config BUSYBOX_CONFIG_BLKDISCARD
- bool "blkdiscard"
+ bool "blkdiscard (4.3 kb)"
default BUSYBOX_DEFAULT_BLKDISCARD
+ select BUSYBOX_CONFIG_PLATFORM_LINUX
help
blkdiscard discards sectors on a given device.
config BUSYBOX_CONFIG_BLKID
- bool "blkid"
+ bool "blkid (12 kb)"
default BUSYBOX_DEFAULT_BLKID
select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_VOLUMEID
help
Lists labels and UUIDs of all filesystems.
- WARNING:
- With all submodules selected, it will add ~8k to busybox.
config BUSYBOX_CONFIG_FEATURE_BLKID_TYPE
bool "Print filesystem type"
help
Show TYPE="filesystem type"
config BUSYBOX_CONFIG_BLOCKDEV
- bool "blockdev"
+ bool "blockdev (2.3 kb)"
default BUSYBOX_DEFAULT_BLOCKDEV
help
Performs some ioctls with block devices.
config BUSYBOX_CONFIG_CAL
- bool "cal"
+ bool "cal (5.8 kb)"
default BUSYBOX_DEFAULT_CAL
help
cal is used to display a monthly calendar.
config BUSYBOX_CONFIG_CHRT
- bool "chrt"
+ bool "chrt (4.7 kb)"
default BUSYBOX_DEFAULT_CHRT
help
- manipulate real-time attributes of a process.
+ Manipulate real-time attributes of a process.
This requires sched_{g,s}etparam support in your libc.
config BUSYBOX_CONFIG_DMESG
- bool "dmesg"
+ bool "dmesg (3.7 kb)"
default BUSYBOX_DEFAULT_DMESG
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
"<#>".
With this option you will see:
- # dmesg
- Linux version 2.6.17.4 .....
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
+ # dmesg
+ Linux version 2.6.17.4 .....
+ BIOS-provided physical RAM map:
+ BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
Without this option you will see:
- # dmesg
- <5>Linux version 2.6.17.4 .....
- <6>BIOS-provided physical RAM map:
- <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
+ # dmesg
+ <5>Linux version 2.6.17.4 .....
+ <6>BIOS-provided physical RAM map:
+ <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
config BUSYBOX_CONFIG_EJECT
- bool "eject"
+ bool "eject (4 kb)"
default BUSYBOX_DEFAULT_EJECT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Add the -s option to eject, this allows to eject SCSI-Devices and
usb-storage devices.
config BUSYBOX_CONFIG_FALLOCATE
- bool "fallocate"
+ bool "fallocate (4.1 kb)"
default BUSYBOX_DEFAULT_FALLOCATE
help
Preallocate space for files.
config BUSYBOX_CONFIG_FATATTR
- bool "fatattr"
+ bool "fatattr (1.9 kb)"
default BUSYBOX_DEFAULT_FATATTR
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
fatattr lists or changes the file attributes on a fat file system.
config BUSYBOX_CONFIG_FBSET
- bool "fbset"
+ bool "fbset (5.9 kb)"
default BUSYBOX_DEFAULT_FBSET
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
default BUSYBOX_DEFAULT_FEATURE_FBSET_READMODE /etc/fb.modes, which can be used to set frame buffer
device to pre-defined video modes.
config BUSYBOX_CONFIG_FDFORMAT
- bool "fdformat"
+ bool "fdformat (4.4 kb)"
default BUSYBOX_DEFAULT_FDFORMAT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
fdformat is used to low-level format a floppy disk.
config BUSYBOX_CONFIG_FDISK
- bool "fdisk"
+ bool "fdisk (37 kb)"
default BUSYBOX_DEFAULT_FDISK
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
partition, and similarly evil things. Unless you have a very good
reason you would be wise to leave this disabled.
config BUSYBOX_CONFIG_FINDFS
- bool "findfs"
+ bool "findfs (12 kb)"
default BUSYBOX_DEFAULT_FINDFS
select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_VOLUMEID
help
Prints the name of a filesystem with given label or UUID.
- WARNING:
- With all submodules selected, it will add ~8k to busybox.
config BUSYBOX_CONFIG_FLOCK
- bool "flock"
+ bool "flock (6.3 kb)"
default BUSYBOX_DEFAULT_FLOCK
help
Manage locks from shell scripts
config BUSYBOX_CONFIG_FDFLUSH
- bool "fdflush"
+ bool "fdflush (1.3 kb)"
default BUSYBOX_DEFAULT_FDFLUSH
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
leave this disabled.
config BUSYBOX_CONFIG_FREERAMDISK
- bool "freeramdisk"
+ bool "freeramdisk (1.3 kb)"
default BUSYBOX_DEFAULT_FREERAMDISK
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
ramdisk. If you have no use for freeing memory from a ramdisk, leave
this disabled.
config BUSYBOX_CONFIG_FSCK_MINIX
- bool "fsck_minix"
+ bool "fsck.minix (13 kb)"
default BUSYBOX_DEFAULT_FSCK_MINIX
help
The minix filesystem is a nice, small, compact, read-write filesystem
check for and attempt to repair any corruption that occurs to a minix
filesystem.
config BUSYBOX_CONFIG_FSFREEZE
- bool "fsfreeze"
+ bool "fsfreeze (3.5 kb)"
default BUSYBOX_DEFAULT_FSFREEZE
select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_LONG_OPTS
help
Halt new accesses and flush writes on a mounted filesystem.
config BUSYBOX_CONFIG_FSTRIM
- bool "fstrim"
+ bool "fstrim (4.4 kb)"
default BUSYBOX_DEFAULT_FSTRIM
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Discard unused blocks on a mounted filesystem.
config BUSYBOX_CONFIG_GETOPT
- bool "getopt"
+ bool "getopt (5.8 kb)"
default BUSYBOX_DEFAULT_GETOPT
help
The getopt utility is used to break up (parse) options in command
wisely leave this disabled.
config BUSYBOX_CONFIG_FEATURE_GETOPT_LONG
- bool "Support option -l"
- default BUSYBOX_DEFAULT_FEATURE_GETOPT_LONG if BUSYBOX_CONFIG_LONG_OPTS
- depends on BUSYBOX_CONFIG_GETOPT
+ bool "Support -l LONGOPTs"
+ default BUSYBOX_DEFAULT_FEATURE_GETOPT_LONG
+ depends on BUSYBOX_CONFIG_GETOPT && BUSYBOX_CONFIG_LONG_OPTS
help
Enable support for long options (option -l).
config BUSYBOX_CONFIG_HEXDUMP
- bool "hexdump"
+ bool "hexdump (8.6 kb)"
default BUSYBOX_DEFAULT_HEXDUMP
help
The hexdump utility is used to display binary data in a readable
aimed to be portable.
config BUSYBOX_CONFIG_HD
- bool "hd"
+ bool "hd (7.8 kb)"
default BUSYBOX_DEFAULT_HD
help
hd is an alias to hexdump -C.
config BUSYBOX_CONFIG_XXD
- bool "xxd"
+ bool "xxd (8.9 kb)"
default BUSYBOX_DEFAULT_XXD
help
The xxd utility is used to display binary data in a readable
way that is comparable to the output from most hex editors.
config BUSYBOX_CONFIG_HWCLOCK
- bool "hwclock"
+ bool "hwclock (5.8 kb)"
default BUSYBOX_DEFAULT_HWCLOCK
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
shutdown in the hardware clock, so the hardware will keep the
correct time when Linux is _not_ running.
-config BUSYBOX_CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS
- bool "Support long options (--hctosys,...)"
- default BUSYBOX_DEFAULT_FEATURE_HWCLOCK_LONG_OPTIONS
- depends on BUSYBOX_CONFIG_HWCLOCK && BUSYBOX_CONFIG_LONG_OPTS
-
config BUSYBOX_CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS
bool "Use FHS /var/lib/hwclock/adjtime"
default BUSYBOX_DEFAULT_FEATURE_HWCLOCK_ADJTIME_FHS # util-linux-ng in Fedora 13 still uses /etc/adjtime
pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
config BUSYBOX_CONFIG_IONICE
- bool "ionice"
+ bool "ionice (3.8 kb)"
default BUSYBOX_DEFAULT_IONICE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Set/set program io scheduling class and priority
Requires kernel >= 2.6.13
config BUSYBOX_CONFIG_IPCRM
- bool "ipcrm"
+ bool "ipcrm (3.2 kb)"
default BUSYBOX_DEFAULT_IPCRM
help
The ipcrm utility allows the removal of System V interprocess
communication (IPC) objects and the associated data structures
from the system.
config BUSYBOX_CONFIG_IPCS
- bool "ipcs"
+ bool "ipcs (11 kb)"
default BUSYBOX_DEFAULT_IPCS
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
The ipcs utility is used to provide information on the currently
allocated System V interprocess (IPC) objects in the system.
config BUSYBOX_CONFIG_LAST
- bool "last"
+ bool "last (6.1 kb)"
default BUSYBOX_DEFAULT_LAST
depends on BUSYBOX_CONFIG_FEATURE_WTMP
help
'last' displays detailed information about the last users that
logged into the system (mimics sysvinit last). +900 bytes.
config BUSYBOX_CONFIG_LOSETUP
- bool "losetup"
+ bool "losetup (5.5 kb)"
default BUSYBOX_DEFAULT_LOSETUP
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
file or block device, and to query the status of a loop device. This
version does not currently support enabling data encryption.
config BUSYBOX_CONFIG_LSPCI
- bool "lspci"
+ bool "lspci (6.3 kb)"
default BUSYBOX_DEFAULT_LSPCI
#select PLATFORM_LINUX
help
This version uses sysfs (/sys/bus/pci/devices) only.
config BUSYBOX_CONFIG_LSUSB
- bool "lsusb"
+ bool "lsusb (4.2 kb)"
default BUSYBOX_DEFAULT_LSUSB
#select PLATFORM_LINUX
help
This version uses sysfs (/sys/bus/usb/devices) only.
config BUSYBOX_CONFIG_MDEV
- bool "mdev"
+ bool "mdev (17 kb)"
default BUSYBOX_DEFAULT_MDEV
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
For more information, please see docs/mdev.txt
config BUSYBOX_CONFIG_FEATURE_MDEV_LOAD_FIRMWARE
- bool "Support loading of firmwares"
+ bool "Support loading of firmware"
default BUSYBOX_DEFAULT_FEATURE_MDEV_LOAD_FIRMWARE
depends on BUSYBOX_CONFIG_MDEV
help
/lib/firmware/ and if it exists, send it to the kernel for
loading into the hardware.
config BUSYBOX_CONFIG_MESG
- bool "mesg"
+ bool "mesg (1.4 kb)"
default BUSYBOX_DEFAULT_MESG
help
Mesg controls access to your terminal by others. It is typically
If you set this option to N, "mesg y" will enable writing
by anybody at all. This is not recommended.
config BUSYBOX_CONFIG_MKE2FS
- bool "mke2fs"
+ bool "mke2fs (10 kb)"
default BUSYBOX_DEFAULT_MKE2FS
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Utility to create EXT2 filesystems.
config BUSYBOX_CONFIG_MKFS_EXT2
- bool "mkfs.ext2"
+ bool "mkfs.ext2 (10 kb)"
default BUSYBOX_DEFAULT_MKFS_EXT2
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Alias to "mke2fs".
config BUSYBOX_CONFIG_MKFS_MINIX
- bool "mkfs_minix"
+ bool "mkfs.minix (10 kb)"
default BUSYBOX_DEFAULT_MKFS_MINIX
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Utility to create ReiserFS filesystems.
Note: this applet needs a lot of testing and polishing.
config BUSYBOX_CONFIG_MKDOSFS
- bool "mkdosfs"
+ bool "mkdosfs (7.2 kb)"
default BUSYBOX_DEFAULT_MKDOSFS
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Utility to create FAT32 filesystems.
config BUSYBOX_CONFIG_MKFS_VFAT
- bool "mkfs.vfat"
+ bool "mkfs.vfat (7.2 kb)"
default BUSYBOX_DEFAULT_MKFS_VFAT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Alias to "mkdosfs".
config BUSYBOX_CONFIG_MKSWAP
- bool "mkswap"
+ bool "mkswap (6.3 kb)"
default BUSYBOX_DEFAULT_MKSWAP
help
The mkswap utility is used to configure a file or disk partition as
help
Generate swap spaces with universally unique identifiers.
config BUSYBOX_CONFIG_MORE
- bool "more"
+ bool "more (7 kb)"
default BUSYBOX_DEFAULT_MORE
help
more is a simple utility which allows you to read text one screen
you will probably find this utility very helpful. If you don't have
any need to reading text files, you can leave this disabled.
config BUSYBOX_CONFIG_MOUNT
- bool "mount"
+ bool "mount (23 kb)"
default BUSYBOX_DEFAULT_MOUNT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
tree. The 'mount' utility is used to graft a filesystem onto a
particular part of the tree. A filesystem can either live on a block
device, or it can be accessible over the network, as is the case with
- NFS filesystems. Most people using BusyBox will also want to enable
- the 'mount' utility.
+ NFS filesystems.
config BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
- bool "Support option -f"
+ bool "Support -f (fake mount)"
default BUSYBOX_DEFAULT_FEATURE_MOUNT_FAKE
depends on BUSYBOX_CONFIG_MOUNT
help
Enable support for faking a file system mount.
config BUSYBOX_CONFIG_FEATURE_MOUNT_VERBOSE
- bool "Support option -v"
+ bool "Support -v (verbose)"
default BUSYBOX_DEFAULT_FEATURE_MOUNT_VERBOSE
depends on BUSYBOX_CONFIG_MOUNT
help
help
This allows for specifying a device by label or uuid, rather than by
name. This feature utilizes the same functionality as blkid/findfs.
- This also enables label or uuid support for swapon.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS
+ bool "Support mounting NFS file systems on Linux < 2.6.23"
+ default BUSYBOX_DEFAULT_FEATURE_MOUNT_NFS
+ depends on BUSYBOX_CONFIG_MOUNT
+ select BUSYBOX_CONFIG_FEATURE_SYSLOG
+ help
+ Enable mounting of NFS file systems on Linux kernels prior
+ to version 2.6.23. Note that in this case mounting of NFS
+ over IPv6 will not be possible.
+
+ Note that this option links in RPC support from libc,
+ which is rather large (~10 kbytes on uclibc).
config BUSYBOX_CONFIG_FEATURE_MOUNT_CIFS
bool "Support mounting CIFS/SMB file systems"
config BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB
depends on BUSYBOX_CONFIG_MOUNT
- bool "Support /etc/fstab and -a"
+ bool "Support /etc/fstab and -a (mount all)"
default BUSYBOX_DEFAULT_FEATURE_MOUNT_FSTAB
help
Support mount all and looking for files in /etc/fstab.
help
Support mount -T (specifying an alternate fstab)
config BUSYBOX_CONFIG_MOUNTPOINT
- bool "mountpoint"
+ bool "mountpoint (4.9 kb)"
default BUSYBOX_DEFAULT_MOUNTPOINT
help
mountpoint checks if the directory is a mountpoint.
+config BUSYBOX_CONFIG_NOLOGIN
+ bool "nologin"
+ default BUSYBOX_DEFAULT_NOLOGIN
+ depends on BUSYBOX_CONFIG_FEATURE_SH_EMBEDDED_SCRIPTS
+ help
+ Politely refuse a login
+
+config BUSYBOX_CONFIG_NOLOGIN_DEPENDENCIES
+ bool "Enable dependencies for nologin"
+ default BUSYBOX_DEFAULT_NOLOGIN_DEPENDENCIES
+ depends on BUSYBOX_CONFIG_NOLOGIN
+ select BUSYBOX_CONFIG_CAT
+ select BUSYBOX_CONFIG_ECHO
+ select BUSYBOX_CONFIG_SLEEP
+ help
+ nologin is implemented as a shell script. It requires the
+ following in the runtime environment:
+ cat echo sleep
+ If you know these will be available externally you can
+ disable this option.
config BUSYBOX_CONFIG_NSENTER
- bool "nsenter"
+ bool "nsenter (6.5 kb)"
default BUSYBOX_DEFAULT_NSENTER
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Run program with namespaces of other processes.
-
-config BUSYBOX_CONFIG_FEATURE_NSENTER_LONG_OPTS
- bool "Enable long options"
- default BUSYBOX_DEFAULT_FEATURE_NSENTER_LONG_OPTS
- depends on BUSYBOX_CONFIG_NSENTER && BUSYBOX_CONFIG_LONG_OPTS
- help
- Support long options for the nsenter applet. This makes
- the busybox implementation more compatible with upstream.
config BUSYBOX_CONFIG_PIVOT_ROOT
- bool "pivot_root"
+ bool "pivot_root (1.1 kb)"
default BUSYBOX_DEFAULT_PIVOT_ROOT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Note: This is for initrd in linux 2.4. Under initramfs (introduced
in linux 2.6) use switch_root instead.
config BUSYBOX_CONFIG_RDATE
- bool "rdate"
+ bool "rdate (5.6 kb)"
default BUSYBOX_DEFAULT_RDATE
help
The rdate utility allows you to synchronize the date and time of your
the RFC868 protocol, which is built into the inetd daemon on most
systems.
config BUSYBOX_CONFIG_RDEV
- bool "rdev"
+ bool "rdev (1.8 kb)"
default BUSYBOX_DEFAULT_RDEV
help
Print the device node associated with the filesystem mounted at '/'.
config BUSYBOX_CONFIG_READPROFILE
- bool "readprofile"
+ bool "readprofile (7.1 kb)"
default BUSYBOX_DEFAULT_READPROFILE
#select PLATFORM_LINUX
help
This allows you to parse /proc/profile for basic profiling.
config BUSYBOX_CONFIG_RENICE
- bool "renice"
+ bool "renice (4.2 kb)"
default BUSYBOX_DEFAULT_RENICE
help
Renice alters the scheduling priority of one or more running
processes.
config BUSYBOX_CONFIG_REV
- bool "rev"
+ bool "rev (4.4 kb)"
default BUSYBOX_DEFAULT_REV
help
Reverse lines of a file or files.
config BUSYBOX_CONFIG_RTCWAKE
- bool "rtcwake"
+ bool "rtcwake (6.8 kb)"
default BUSYBOX_DEFAULT_RTCWAKE
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Enter a system sleep state until specified wakeup time.
config BUSYBOX_CONFIG_SCRIPT
- bool "script"
+ bool "script (8.6 kb)"
default BUSYBOX_DEFAULT_SCRIPT
help
The script makes typescript of terminal session.
config BUSYBOX_CONFIG_SCRIPTREPLAY
- bool "scriptreplay"
+ bool "scriptreplay (2.4 kb)"
default BUSYBOX_DEFAULT_SCRIPTREPLAY
help
This program replays a typescript, using timing information
given by script -t.
config BUSYBOX_CONFIG_SETARCH
- bool "setarch"
+ bool "setarch (3.6 kb)"
default BUSYBOX_DEFAULT_SETARCH
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
(like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
config BUSYBOX_CONFIG_LINUX32
- bool "linux32"
+ bool "linux32 (3.3 kb)"
default BUSYBOX_DEFAULT_LINUX32
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Alias to "setarch linux32".
config BUSYBOX_CONFIG_LINUX64
- bool "linux64"
+ bool "linux64 (3.3 kb)"
default BUSYBOX_DEFAULT_LINUX64
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Alias to "setarch linux64".
config BUSYBOX_CONFIG_SETPRIV
- bool "setpriv"
+ bool "setpriv (6.6 kb)"
default BUSYBOX_DEFAULT_SETPRIV
select BUSYBOX_CONFIG_PLATFORM_LINUX
select BUSYBOX_CONFIG_LONG_OPTS
help
Run a program with different Linux privilege settings.
Requires kernel >= 3.5
+
+config BUSYBOX_CONFIG_FEATURE_SETPRIV_DUMP
+ bool "Support dumping current privilege state"
+ default BUSYBOX_DEFAULT_FEATURE_SETPRIV_DUMP
+ depends on BUSYBOX_CONFIG_SETPRIV
+ help
+ Enables the "--dump" switch to print out the current privilege
+ state. This is helpful for diagnosing problems.
+
+config BUSYBOX_CONFIG_FEATURE_SETPRIV_CAPABILITIES
+ bool "Support capabilities"
+ default BUSYBOX_DEFAULT_FEATURE_SETPRIV_CAPABILITIES
+ depends on BUSYBOX_CONFIG_SETPRIV
+ help
+ Capabilities can be used to grant processes additional rights
+ without the necessity to always execute as the root user.
+ Enabling this option enables "--dump" to show information on
+ capabilities.
+
+config BUSYBOX_CONFIG_FEATURE_SETPRIV_CAPABILITY_NAMES
+ bool "Support capability names"
+ default BUSYBOX_DEFAULT_FEATURE_SETPRIV_CAPABILITY_NAMES
+ depends on BUSYBOX_CONFIG_SETPRIV && BUSYBOX_CONFIG_FEATURE_SETPRIV_CAPABILITIES
+ help
+ Capabilities can be either referenced via a human-readble name,
+ e.g. "net_admin", or using their index, e.g. "cap_12". Enabling
+ this option allows using the human-readable names in addition to
+ the index-based names.
config BUSYBOX_CONFIG_SETSID
- bool "setsid"
+ bool "setsid (3.6 kb)"
default BUSYBOX_DEFAULT_SETSID
help
setsid runs a program in a new session
config BUSYBOX_CONFIG_SWAPON
- bool "swapon"
+ bool "swapon (15 kb)"
default BUSYBOX_DEFAULT_SWAPON
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
- This option enables the 'swapon' utility.
Once you have created some swap space using 'mkswap', you also need
to enable your swap space with the 'swapon' utility. The 'swapoff'
utility is used, typically at system shutdown, to disable any swap
Enable support for setting swap device priority in swapon.
config BUSYBOX_CONFIG_SWAPOFF
- bool "swapoff"
+ bool "swapoff (14 kb)"
default BUSYBOX_DEFAULT_SWAPOFF
select BUSYBOX_CONFIG_PLATFORM_LINUX
+
+config BUSYBOX_CONFIG_FEATURE_SWAPONOFF_LABEL
+ bool "Support specifying devices by label or UUID"
+ default BUSYBOX_DEFAULT_FEATURE_SWAPONOFF_LABEL
+ depends on BUSYBOX_CONFIG_SWAPON || BUSYBOX_CONFIG_SWAPOFF
+ select BUSYBOX_CONFIG_VOLUMEID
help
- This option enables the 'swapoff' utility.
+ This allows for specifying a device by label or uuid, rather than by
+ name. This feature utilizes the same functionality as blkid/findfs.
config BUSYBOX_CONFIG_SWITCH_ROOT
- bool "switch_root"
+ bool "switch_root (5.5 kb)"
default BUSYBOX_DEFAULT_SWITCH_ROOT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
* Because the Linux kernel uses rootfs internally as the starting
and ending point for searching through the kernel's doubly linked
list of active mount points. That's why.
+
config BUSYBOX_CONFIG_TASKSET
- bool "taskset"
+ bool "taskset (4.2 kb)"
default BUSYBOX_DEFAULT_TASKSET
help
Retrieve or set a processes's CPU affinity.
affinity parameter 0xHHHHHHHHHHHHHHHHHHHH can be arbitrarily long
in this case. Otherwise, it is limited to sizeof(long).
config BUSYBOX_CONFIG_UEVENT
- bool "uevent"
+ bool "uevent (3.1 kb)"
default BUSYBOX_DEFAULT_UEVENT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
uevent is a netlink listener for kernel uevent notifications
sent via netlink. It is usually used for dynamic device creation.
config BUSYBOX_CONFIG_UMOUNT
- bool "umount"
+ bool "umount (5.1 kb)"
default BUSYBOX_DEFAULT_UMOUNT
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
utility, you almost certainly also want to enable 'umount'.
config BUSYBOX_CONFIG_FEATURE_UMOUNT_ALL
- bool "Support option -a"
+ bool "Support -a (unmount all)"
default BUSYBOX_DEFAULT_FEATURE_UMOUNT_ALL
depends on BUSYBOX_CONFIG_UMOUNT
help
Support -a option to unmount all currently mounted filesystems.
config BUSYBOX_CONFIG_UNSHARE
- bool "unshare"
+ bool "unshare (7.2 kb)"
default BUSYBOX_DEFAULT_UNSHARE
depends on !BUSYBOX_CONFIG_NOMMU
select BUSYBOX_CONFIG_PLATFORM_LINUX
help
Run program with some namespaces unshared from parent.
config BUSYBOX_CONFIG_WALL
- bool "wall"
+ bool "wall (2.6 kb)"
default BUSYBOX_DEFAULT_WALL
depends on BUSYBOX_CONFIG_FEATURE_UTMP
help
# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
+# see docs/Kconfig-language.txt.
#
config BUSYBOX_CONFIG_VOLUMEID
bool "jfs filesystem"
default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_JFS
depends on BUSYBOX_CONFIG_VOLUMEID
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LFS
+ bool "LittleFS filesystem"
+ default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LFS
+ depends on BUSYBOX_CONFIG_VOLUMEID && BUSYBOX_CONFIG_FEATURE_BLKID_TYPE
+ help
+ LittleFS is a small fail-safe filesystem designed for embedded
+ systems. It has strong copy-on-write guarantees and storage on disk
+ is always kept in a valid state. It also provides a form of dynamic
+ wear levelling for systems that can not fit a full flash translation
+ layer.
config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXRAID
bool "linuxraid"
default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LINUXRAID
bool "luks filesystem"
default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_LUKS
depends on BUSYBOX_CONFIG_VOLUMEID
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_MINIX
+ bool "minix filesystem"
+ default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_MINIX
+ depends on BUSYBOX_CONFIG_VOLUMEID
config BUSYBOX_CONFIG_FEATURE_VOLUMEID_NILFS
bool "nilfs filesystem"
default BUSYBOX_DEFAULT_FEATURE_VOLUMEID_NILFS
### bool "mac filesystem"
### default y
### depends on VOLUMEID
-### config FEATURE_VOLUMEID_MINIX
-### bool "minix filesystem"
-### default y
-### depends on VOLUMEID
### config FEATURE_VOLUMEID_MSDOS
### bool "msdos filesystem"
### default y
projects / openwrt / staging / adrian.git / commitdiff