--- /dev/null
+---
+ drivers/rtc/rtc-isl1208.c | 357 +++++++++++++++++++++-------------------------
+ 1 file changed, 170 insertions(+), 187 deletions(-)
+
+Index: linux-2.6.25-rc6-armeb/drivers/rtc/rtc-isl1208.c
+===================================================================
+--- linux-2.6.25-rc6-armeb.orig/drivers/rtc/rtc-isl1208.c 2008-03-20 10:26:41.000000000 +1030
++++ linux-2.6.25-rc6-armeb/drivers/rtc/rtc-isl1208.c 2008-03-20 10:26:53.000000000 +1030
+@@ -15,16 +15,15 @@
+ #include <linux/bcd.h>
+ #include <linux/rtc.h>
+
+-#define DRV_NAME "isl1208"
+-#define DRV_VERSION "0.2"
++#define DRV_VERSION "0.3"
+
+ /* Register map */
+ /* rtc section */
+ #define ISL1208_REG_SC 0x00
+ #define ISL1208_REG_MN 0x01
+ #define ISL1208_REG_HR 0x02
+-#define ISL1208_REG_HR_MIL (1<<7) /* 24h/12h mode */
+-#define ISL1208_REG_HR_PM (1<<5) /* PM/AM bit in 12h mode */
++#define ISL1208_REG_HR_MIL (1<<7) /* 24h/12h mode */
++#define ISL1208_REG_HR_PM (1<<5) /* PM/AM bit in 12h mode */
+ #define ISL1208_REG_DT 0x03
+ #define ISL1208_REG_MO 0x04
+ #define ISL1208_REG_YR 0x05
+@@ -33,14 +32,14 @@
+
+ /* control/status section */
+ #define ISL1208_REG_SR 0x07
+-#define ISL1208_REG_SR_ARST (1<<7) /* auto reset */
+-#define ISL1208_REG_SR_XTOSCB (1<<6) /* crystal oscillator */
+-#define ISL1208_REG_SR_WRTC (1<<4) /* write rtc */
+-#define ISL1208_REG_SR_ALM (1<<2) /* alarm */
+-#define ISL1208_REG_SR_BAT (1<<1) /* battery */
+-#define ISL1208_REG_SR_RTCF (1<<0) /* rtc fail */
++#define ISL1208_REG_SR_ARST (1<<7) /* auto reset */
++#define ISL1208_REG_SR_XTOSCB (1<<6) /* crystal oscillator */
++#define ISL1208_REG_SR_WRTC (1<<4) /* write rtc */
++#define ISL1208_REG_SR_ALM (1<<2) /* alarm */
++#define ISL1208_REG_SR_BAT (1<<1) /* battery */
++#define ISL1208_REG_SR_RTCF (1<<0) /* rtc fail */
+ #define ISL1208_REG_INT 0x08
+-#define ISL1208_REG_09 0x09 /* reserved */
++#define ISL1208_REG_09 0x09 /* reserved */
+ #define ISL1208_REG_ATR 0x0a
+ #define ISL1208_REG_DTR 0x0b
+
+@@ -58,39 +57,21 @@
+ #define ISL1208_REG_USR2 0x13
+ #define ISL1208_USR_SECTION_LEN 2
+
+-/* i2c configuration */
+-#define ISL1208_I2C_ADDR 0xde
+-
+-static const unsigned short normal_i2c[] = {
+- ISL1208_I2C_ADDR>>1, I2C_CLIENT_END
+-};
+-I2C_CLIENT_INSMOD; /* defines addr_data */
+-
+-static int isl1208_attach_adapter(struct i2c_adapter *adapter);
+-static int isl1208_detach_client(struct i2c_client *client);
+-
+-static struct i2c_driver isl1208_driver = {
+- .driver = {
+- .name = DRV_NAME,
+- },
+- .id = I2C_DRIVERID_ISL1208,
+- .attach_adapter = &isl1208_attach_adapter,
+- .detach_client = &isl1208_detach_client,
+-};
++static struct i2c_driver isl1208_driver;
+
+ /* block read */
+ static int
+ isl1208_i2c_read_regs(struct i2c_client *client, u8 reg, u8 buf[],
+- unsigned len)
++ unsigned len)
+ {
+ u8 reg_addr[1] = { reg };
+ struct i2c_msg msgs[2] = {
+- { client->addr, client->flags, sizeof(reg_addr), reg_addr },
+- { client->addr, client->flags | I2C_M_RD, len, buf }
++ {client->addr, client->flags, sizeof(reg_addr), reg_addr}
++ ,
++ {client->addr, client->flags | I2C_M_RD, len, buf}
+ };
+ int ret;
+
+- BUG_ON(len == 0);
+ BUG_ON(reg > ISL1208_REG_USR2);
+ BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
+
+@@ -103,15 +84,14 @@
+ /* block write */
+ static int
+ isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[],
+- unsigned len)
++ unsigned len)
+ {
+ u8 i2c_buf[ISL1208_REG_USR2 + 2];
+ struct i2c_msg msgs[1] = {
+- { client->addr, client->flags, len + 1, i2c_buf }
++ {client->addr, client->flags, len + 1, i2c_buf}
+ };
+ int ret;
+
+- BUG_ON(len == 0);
+ BUG_ON(reg > ISL1208_REG_USR2);
+ BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
+
+@@ -125,7 +105,8 @@
+ }
+
+ /* simple check to see wether we have a isl1208 */
+-static int isl1208_i2c_validate_client(struct i2c_client *client)
++static int
++isl1208_i2c_validate_client(struct i2c_client *client)
+ {
+ u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
+ u8 zero_mask[ISL1208_RTC_SECTION_LEN] = {
+@@ -139,24 +120,29 @@
+ return ret;
+
+ for (i = 0; i < ISL1208_RTC_SECTION_LEN; ++i) {
+- if (regs[i] & zero_mask[i]) /* check if bits are cleared */
++ if (regs[i] & zero_mask[i]) /* check if bits are cleared */
+ return -ENODEV;
+ }
+
+ return 0;
+ }
+
+-static int isl1208_i2c_get_sr(struct i2c_client *client)
++static int
++isl1208_i2c_get_sr(struct i2c_client *client)
+ {
+- return i2c_smbus_read_byte_data(client, ISL1208_REG_SR) == -1 ? -EIO:0;
++ int sr = i2c_smbus_read_byte_data(client, ISL1208_REG_SR);
++ if (sr < 0)
++ return -EIO;
++
++ return sr;
+ }
+
+-static int isl1208_i2c_get_atr(struct i2c_client *client)
++static int
++isl1208_i2c_get_atr(struct i2c_client *client)
+ {
+ int atr = i2c_smbus_read_byte_data(client, ISL1208_REG_ATR);
+-
+ if (atr < 0)
+- return -EIO;
++ return atr;
+
+ /* The 6bit value in the ATR register controls the load
+ * capacitance C_load * in steps of 0.25pF
+@@ -169,51 +155,54 @@
+ *
+ */
+
+- atr &= 0x3f; /* mask out lsb */
+- atr ^= 1<<5; /* invert 6th bit */
+- atr += 2*9; /* add offset of 4.5pF; unit[atr] = 0.25pF */
++ atr &= 0x3f; /* mask out lsb */
++ atr ^= 1 << 5; /* invert 6th bit */
++ atr += 2 * 9; /* add offset of 4.5pF; unit[atr] = 0.25pF */
+
+ return atr;
+ }
+
+-static int isl1208_i2c_get_dtr(struct i2c_client *client)
++static int
++isl1208_i2c_get_dtr(struct i2c_client *client)
+ {
+ int dtr = i2c_smbus_read_byte_data(client, ISL1208_REG_DTR);
+-
+ if (dtr < 0)
+ return -EIO;
+
+ /* dtr encodes adjustments of {-60,-40,-20,0,20,40,60} ppm */
+- dtr = ((dtr & 0x3) * 20) * (dtr & (1<<2) ? -1 : 1);
++ dtr = ((dtr & 0x3) * 20) * (dtr & (1 << 2) ? -1 : 1);
+
+ return dtr;
+ }
+
+-static int isl1208_i2c_get_usr(struct i2c_client *client)
++static int
++isl1208_i2c_get_usr(struct i2c_client *client)
+ {
+ u8 buf[ISL1208_USR_SECTION_LEN] = { 0, };
+ int ret;
+
+- ret = isl1208_i2c_read_regs (client, ISL1208_REG_USR1, buf,
+- ISL1208_USR_SECTION_LEN);
++ ret = isl1208_i2c_read_regs(client, ISL1208_REG_USR1, buf,
++ ISL1208_USR_SECTION_LEN);
+ if (ret < 0)
+ return ret;
+
+ return (buf[1] << 8) | buf[0];
+ }
+
+-static int isl1208_i2c_set_usr(struct i2c_client *client, u16 usr)
++static int
++isl1208_i2c_set_usr(struct i2c_client *client, u16 usr)
+ {
+ u8 buf[ISL1208_USR_SECTION_LEN];
+
+ buf[0] = usr & 0xff;
+ buf[1] = (usr >> 8) & 0xff;
+
+- return isl1208_i2c_set_regs (client, ISL1208_REG_USR1, buf,
+- ISL1208_USR_SECTION_LEN);
++ return isl1208_i2c_set_regs(client, ISL1208_REG_USR1, buf,
++ ISL1208_USR_SECTION_LEN);
+ }
+
+-static int isl1208_rtc_proc(struct device *dev, struct seq_file *seq)
++static int
++isl1208_rtc_proc(struct device *dev, struct seq_file *seq)
+ {
+ struct i2c_client *const client = to_i2c_client(dev);
+ int sr, dtr, atr, usr;
+@@ -230,20 +219,19 @@
+ (sr & ISL1208_REG_SR_ALM) ? " ALM" : "",
+ (sr & ISL1208_REG_SR_WRTC) ? " WRTC" : "",
+ (sr & ISL1208_REG_SR_XTOSCB) ? " XTOSCB" : "",
+- (sr & ISL1208_REG_SR_ARST) ? " ARST" : "",
+- sr);
++ (sr & ISL1208_REG_SR_ARST) ? " ARST" : "", sr);
+
+ seq_printf(seq, "batt_status\t: %s\n",
+ (sr & ISL1208_REG_SR_RTCF) ? "bad" : "okay");
+
+ dtr = isl1208_i2c_get_dtr(client);
+- if (dtr >= 0 -1)
++ if (dtr >= 0 - 1)
+ seq_printf(seq, "digital_trim\t: %d ppm\n", dtr);
+
+ atr = isl1208_i2c_get_atr(client);
+ if (atr >= 0)
+ seq_printf(seq, "analog_trim\t: %d.%.2d pF\n",
+- atr>>2, (atr&0x3)*25);
++ atr >> 2, (atr & 0x3) * 25);
+
+ usr = isl1208_i2c_get_usr(client);
+ if (usr >= 0)
+@@ -252,9 +240,8 @@
+ return 0;
+ }
+
+-
+-static int isl1208_i2c_read_time(struct i2c_client *client,
+- struct rtc_time *tm)
++static int
++isl1208_i2c_read_time(struct i2c_client *client, struct rtc_time *tm)
+ {
+ int sr;
+ u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
+@@ -274,27 +261,30 @@
+
+ tm->tm_sec = BCD2BIN(regs[ISL1208_REG_SC]);
+ tm->tm_min = BCD2BIN(regs[ISL1208_REG_MN]);
+- { /* HR field has a more complex interpretation */
++
++ /* HR field has a more complex interpretation */
++ {
+ const u8 _hr = regs[ISL1208_REG_HR];
+- if (_hr & ISL1208_REG_HR_MIL) /* 24h format */
++ if (_hr & ISL1208_REG_HR_MIL) /* 24h format */
+ tm->tm_hour = BCD2BIN(_hr & 0x3f);
+- else { // 12h format
++ else {
++ /* 12h format */
+ tm->tm_hour = BCD2BIN(_hr & 0x1f);
+- if (_hr & ISL1208_REG_HR_PM) /* PM flag set */
++ if (_hr & ISL1208_REG_HR_PM) /* PM flag set */
+ tm->tm_hour += 12;
+ }
+ }
+
+ tm->tm_mday = BCD2BIN(regs[ISL1208_REG_DT]);
+- tm->tm_mon = BCD2BIN(regs[ISL1208_REG_MO]) - 1; /* rtc starts at 1 */
++ tm->tm_mon = BCD2BIN(regs[ISL1208_REG_MO]) - 1; /* rtc starts at 1 */
+ tm->tm_year = BCD2BIN(regs[ISL1208_REG_YR]) + 100;
+ tm->tm_wday = BCD2BIN(regs[ISL1208_REG_DW]);
+
+ return 0;
+ }
+
+-static int isl1208_i2c_read_alarm(struct i2c_client *client,
+- struct rtc_wkalrm *alarm)
++static int
++isl1208_i2c_read_alarm(struct i2c_client *client, struct rtc_wkalrm *alarm)
+ {
+ struct rtc_time *const tm = &alarm->time;
+ u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
+@@ -307,7 +297,7 @@
+ }
+
+ sr = isl1208_i2c_read_regs(client, ISL1208_REG_SCA, regs,
+- ISL1208_ALARM_SECTION_LEN);
++ ISL1208_ALARM_SECTION_LEN);
+ if (sr < 0) {
+ dev_err(&client->dev, "%s: reading alarm section failed\n",
+ __func__);
+@@ -315,23 +305,25 @@
+ }
+
+ /* MSB of each alarm register is an enable bit */
+- tm->tm_sec = BCD2BIN(regs[ISL1208_REG_SCA-ISL1208_REG_SCA] & 0x7f);
+- tm->tm_min = BCD2BIN(regs[ISL1208_REG_MNA-ISL1208_REG_SCA] & 0x7f);
+- tm->tm_hour = BCD2BIN(regs[ISL1208_REG_HRA-ISL1208_REG_SCA] & 0x3f);
+- tm->tm_mday = BCD2BIN(regs[ISL1208_REG_DTA-ISL1208_REG_SCA] & 0x3f);
+- tm->tm_mon = BCD2BIN(regs[ISL1208_REG_MOA-ISL1208_REG_SCA] & 0x1f)-1;
+- tm->tm_wday = BCD2BIN(regs[ISL1208_REG_DWA-ISL1208_REG_SCA] & 0x03);
++ tm->tm_sec = BCD2BIN(regs[ISL1208_REG_SCA - ISL1208_REG_SCA] & 0x7f);
++ tm->tm_min = BCD2BIN(regs[ISL1208_REG_MNA - ISL1208_REG_SCA] & 0x7f);
++ tm->tm_hour = BCD2BIN(regs[ISL1208_REG_HRA - ISL1208_REG_SCA] & 0x3f);
++ tm->tm_mday = BCD2BIN(regs[ISL1208_REG_DTA - ISL1208_REG_SCA] & 0x3f);
++ tm->tm_mon =
++ BCD2BIN(regs[ISL1208_REG_MOA - ISL1208_REG_SCA] & 0x1f) - 1;
++ tm->tm_wday = BCD2BIN(regs[ISL1208_REG_DWA - ISL1208_REG_SCA] & 0x03);
+
+ return 0;
+ }
+
+-static int isl1208_rtc_read_time(struct device *dev, struct rtc_time *tm)
++static int
++isl1208_rtc_read_time(struct device *dev, struct rtc_time *tm)
+ {
+ return isl1208_i2c_read_time(to_i2c_client(dev), tm);
+ }
+
+-static int isl1208_i2c_set_time(struct i2c_client *client,
+- struct rtc_time const *tm)
++static int
++isl1208_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm)
+ {
+ int sr;
+ u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
+@@ -353,7 +345,7 @@
+ }
+
+ /* set WRTC */
+- sr = i2c_smbus_write_byte_data (client, ISL1208_REG_SR,
++ sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
+ sr | ISL1208_REG_SR_WRTC);
+ if (sr < 0) {
+ dev_err(&client->dev, "%s: writing SR failed\n", __func__);
+@@ -369,7 +361,7 @@
+ }
+
+ /* clear WRTC again */
+- sr = i2c_smbus_write_byte_data (client, ISL1208_REG_SR,
++ sr = i2c_smbus_write_byte_data(client, ISL1208_REG_SR,
+ sr & ~ISL1208_REG_SR_WRTC);
+ if (sr < 0) {
+ dev_err(&client->dev, "%s: writing SR failed\n", __func__);
+@@ -380,70 +372,69 @@
+ }
+
+
+-static int isl1208_rtc_set_time(struct device *dev, struct rtc_time *tm)
++static int
++isl1208_rtc_set_time(struct device *dev, struct rtc_time *tm)
+ {
+ return isl1208_i2c_set_time(to_i2c_client(dev), tm);
+ }
+
+-static int isl1208_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
++static int
++isl1208_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+ {
+ return isl1208_i2c_read_alarm(to_i2c_client(dev), alarm);
+ }
+
+ static const struct rtc_class_ops isl1208_rtc_ops = {
+- .proc = isl1208_rtc_proc,
+- .read_time = isl1208_rtc_read_time,
+- .set_time = isl1208_rtc_set_time,
+- .read_alarm = isl1208_rtc_read_alarm,
+- //.set_alarm = isl1208_rtc_set_alarm,
++ .proc = isl1208_rtc_proc,
++ .read_time = isl1208_rtc_read_time,
++ .set_time = isl1208_rtc_set_time,
++ .read_alarm = isl1208_rtc_read_alarm,
++ /*.set_alarm = isl1208_rtc_set_alarm, */
+ };
+
+ /* sysfs interface */
+
+-static ssize_t isl1208_sysfs_show_atrim(struct device *dev,
+- struct device_attribute *attr,
+- char *buf)
++static ssize_t
++isl1208_sysfs_show_atrim(struct device *dev,
++ struct device_attribute *attr, char *buf)
+ {
+- int atr;
+-
+- atr = isl1208_i2c_get_atr(to_i2c_client(dev));
++ int atr = isl1208_i2c_get_atr(to_i2c_client(dev));
+ if (atr < 0)
+ return atr;
+
+- return sprintf(buf, "%d.%.2d pF\n", atr>>2, (atr&0x3)*25);
++ return sprintf(buf, "%d.%.2d pF\n", atr >> 2, (atr & 0x3) * 25);
+ }
++
+ static DEVICE_ATTR(atrim, S_IRUGO, isl1208_sysfs_show_atrim, NULL);
+
+-static ssize_t isl1208_sysfs_show_dtrim(struct device *dev,
+- struct device_attribute *attr,
+- char *buf)
++static ssize_t
++isl1208_sysfs_show_dtrim(struct device *dev,
++ struct device_attribute *attr, char *buf)
+ {
+- int dtr;
+-
+- dtr = isl1208_i2c_get_dtr(to_i2c_client(dev));
++ int dtr = isl1208_i2c_get_dtr(to_i2c_client(dev));
+ if (dtr < 0)
+ return dtr;
+
+ return sprintf(buf, "%d ppm\n", dtr);
+ }
++
+ static DEVICE_ATTR(dtrim, S_IRUGO, isl1208_sysfs_show_dtrim, NULL);
+
+-static ssize_t isl1208_sysfs_show_usr(struct device *dev,
+- struct device_attribute *attr,
+- char *buf)
++static ssize_t
++isl1208_sysfs_show_usr(struct device *dev,
++ struct device_attribute *attr, char *buf)
+ {
+- int usr;
+-
+- usr = isl1208_i2c_get_usr(to_i2c_client(dev));
++ int usr = isl1208_i2c_get_usr(to_i2c_client(dev));
+ if (usr < 0)
+ return usr;
+
+ return sprintf(buf, "0x%.4x\n", usr);
+ }
+
+-static ssize_t isl1208_sysfs_store_usr(struct device *dev,
+- struct device_attribute *attr,
+- const char *buf, size_t count)
++static ssize_t
++isl1208_sysfs_store_usr(struct device *dev,
++ struct device_attribute *attr,
++ const char *buf, size_t count)
+ {
+ int usr = -1;
+
+@@ -460,124 +451,116 @@
+
+ return isl1208_i2c_set_usr(to_i2c_client(dev), usr) ? -EIO : count;
+ }
++
+ static DEVICE_ATTR(usr, S_IRUGO | S_IWUSR, isl1208_sysfs_show_usr,
+ isl1208_sysfs_store_usr);
+
+ static int
+-isl1208_probe(struct i2c_adapter *adapter, int addr, int kind)
++isl1208_sysfs_register(struct device *dev)
+ {
+- int rc = 0;
+- struct i2c_client *new_client = NULL;
+- struct rtc_device *rtc = NULL;
++ int err;
++
++ err = device_create_file(dev, &dev_attr_atrim);
++ if (err)
++ return err;
+
+- if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
+- rc = -ENODEV;
+- goto failout;
++ err = device_create_file(dev, &dev_attr_dtrim);
++ if (err) {
++ device_remove_file(dev, &dev_attr_atrim);
++ return err;
+ }
+
+- new_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
+- if (new_client == NULL) {
+- rc = -ENOMEM;
+- goto failout;
++ err = device_create_file(dev, &dev_attr_usr);
++ if (err) {
++ device_remove_file(dev, &dev_attr_atrim);
++ device_remove_file(dev, &dev_attr_dtrim);
+ }
+
+- new_client->addr = addr;
+- new_client->adapter = adapter;
+- new_client->driver = &isl1208_driver;
+- new_client->flags = 0;
+- strcpy(new_client->name, DRV_NAME);
++ return 0;
++}
+
+- if (kind < 0) {
+- rc = isl1208_i2c_validate_client(new_client);
+- if (rc < 0)
+- goto failout;
+- }
++static int
++isl1208_sysfs_unregister(struct device *dev)
++{
++ device_remove_file(dev, &dev_attr_atrim);
++ device_remove_file(dev, &dev_attr_atrim);
++ device_remove_file(dev, &dev_attr_usr);
++
++ return 0;
++}
++
++static int
++isl1208_probe(struct i2c_client *client)
++{
++ int rc = 0;
++ struct rtc_device *rtc;
+
+- rc = i2c_attach_client(new_client);
+- if (rc < 0)
+- goto failout;
++ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
++ return -ENODEV;
+
+- dev_info(&new_client->dev,
++ if (isl1208_i2c_validate_client(client) < 0)
++ return -ENODEV;
++
++ dev_info(&client->dev,
+ "chip found, driver version " DRV_VERSION "\n");
+
+ rtc = rtc_device_register(isl1208_driver.driver.name,
+- &new_client->dev,
+- &isl1208_rtc_ops, THIS_MODULE);
+-
+- if (IS_ERR(rtc)) {
+- rc = PTR_ERR(rtc);
+- goto failout_detach;
+- }
++ &client->dev, &isl1208_rtc_ops,
++ THIS_MODULE);
++ if (IS_ERR(rtc))
++ return PTR_ERR(rtc);
+
+- i2c_set_clientdata(new_client, rtc);
++ i2c_set_clientdata(client, rtc);
+
+- rc = isl1208_i2c_get_sr(new_client);
++ rc = isl1208_i2c_get_sr(client);
+ if (rc < 0) {
+- dev_err(&new_client->dev, "reading status failed\n");
+- goto failout_unregister;
++ dev_err(&client->dev, "reading status failed\n");
++ goto exit_unregister;
+ }
+
+ if (rc & ISL1208_REG_SR_RTCF)
+- dev_warn(&new_client->dev, "rtc power failure detected, "
++ dev_warn(&client->dev, "rtc power failure detected, "
+ "please set clock.\n");
+
+- rc = device_create_file(&new_client->dev, &dev_attr_atrim);
+- if (rc < 0)
+- goto failout_unregister;
+- rc = device_create_file(&new_client->dev, &dev_attr_dtrim);
+- if (rc < 0)
+- goto failout_atrim;
+- rc = device_create_file(&new_client->dev, &dev_attr_usr);
+- if (rc < 0)
+- goto failout_dtrim;
++ rc = isl1208_sysfs_register(&client->dev);
++ if (rc)
++ goto exit_unregister;
+
+ return 0;
+
+- failout_dtrim:
+- device_remove_file(&new_client->dev, &dev_attr_dtrim);
+- failout_atrim:
+- device_remove_file(&new_client->dev, &dev_attr_atrim);
+- failout_unregister:
++ exit_unregister:
+ rtc_device_unregister(rtc);
+- failout_detach:
+- i2c_detach_client(new_client);
+- failout:
+- kfree(new_client);
+- return rc;
+-}
+
+-static int
+-isl1208_attach_adapter (struct i2c_adapter *adapter)
+-{
+- return i2c_probe(adapter, &addr_data, isl1208_probe);
++ return rc;
+ }
+
+ static int
+-isl1208_detach_client(struct i2c_client *client)
++isl1208_remove(struct i2c_client *client)
+ {
+- int rc;
+- struct rtc_device *const rtc = i2c_get_clientdata(client);
+-
+- if (rtc)
+- rtc_device_unregister(rtc); /* do we need to kfree? */
+-
+- rc = i2c_detach_client(client);
+- if (rc)
+- return rc;
++ struct rtc_device *rtc = i2c_get_clientdata(client);
+
+- kfree(client);
++ isl1208_sysfs_unregister(&client->dev);
++ rtc_device_unregister(rtc);
+
+ return 0;
+ }
+
+-/* module management */
++static struct i2c_driver isl1208_driver = {
++ .driver = {
++ .name = "rtc-isl1208",
++ },
++ .probe = isl1208_probe,
++ .remove = isl1208_remove,
++};
+
+-static int __init isl1208_init(void)
++static int __init
++isl1208_init(void)
+ {
+ return i2c_add_driver(&isl1208_driver);
+ }
+
+-static void __exit isl1208_exit(void)
++static void __exit
++isl1208_exit(void)
+ {
+ i2c_del_driver(&isl1208_driver);
+ }
--- /dev/null
+---
+ drivers/rtc/rtc-pcf8563.c | 109 +++++++++++++---------------------------------
+ 1 file changed, 32 insertions(+), 77 deletions(-)
+
+Index: linux-2.6.25-rc6-armeb/drivers/rtc/rtc-pcf8563.c
+===================================================================
+--- linux-2.6.25-rc6-armeb.orig/drivers/rtc/rtc-pcf8563.c 2008-03-20 10:26:43.000000000 +1030
++++ linux-2.6.25-rc6-armeb/drivers/rtc/rtc-pcf8563.c 2008-03-20 10:26:51.000000000 +1030
+@@ -18,17 +18,7 @@
+ #include <linux/bcd.h>
+ #include <linux/rtc.h>
+
+-#define DRV_VERSION "0.4.2"
+-
+-/* Addresses to scan: none
+- * This chip cannot be reliably autodetected. An empty eeprom
+- * located at 0x51 will pass the validation routine due to
+- * the way the registers are implemented.
+- */
+-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
+-
+-/* Module parameters */
+-I2C_CLIENT_INSMOD;
++#define DRV_VERSION "0.4.3"
+
+ #define PCF8563_REG_ST1 0x00 /* status */
+ #define PCF8563_REG_ST2 0x01
+@@ -53,8 +43,10 @@
+ #define PCF8563_SC_LV 0x80 /* low voltage */
+ #define PCF8563_MO_C 0x80 /* century */
+
++static struct i2c_driver pcf8563_driver;
++
+ struct pcf8563 {
+- struct i2c_client client;
++ struct rtc_device *rtc;
+ /*
+ * The meaning of MO_C bit varies by the chip type.
+ * From PCF8563 datasheet: this bit is toggled when the years
+@@ -72,16 +64,13 @@
+ int c_polarity; /* 0: MO_C=1 means 19xx, otherwise MO_C=1 means 20xx */
+ };
+
+-static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind);
+-static int pcf8563_detach(struct i2c_client *client);
+-
+ /*
+ * In the routines that deal directly with the pcf8563 hardware, we use
+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
+ */
+ static int pcf8563_get_datetime(struct i2c_client *client, struct rtc_time *tm)
+ {
+- struct pcf8563 *pcf8563 = container_of(client, struct pcf8563, client);
++ struct pcf8563 *pcf8563 = i2c_get_clientdata(client);
+ unsigned char buf[13] = { PCF8563_REG_ST1 };
+
+ struct i2c_msg msgs[] = {
+@@ -138,7 +127,7 @@
+
+ static int pcf8563_set_datetime(struct i2c_client *client, struct rtc_time *tm)
+ {
+- struct pcf8563 *pcf8563 = container_of(client, struct pcf8563, client);
++ struct pcf8563 *pcf8563 = i2c_get_clientdata(client);
+ int i, err;
+ unsigned char buf[9];
+
+@@ -257,100 +246,66 @@
+ .set_time = pcf8563_rtc_set_time,
+ };
+
+-static int pcf8563_attach(struct i2c_adapter *adapter)
+-{
+- return i2c_probe(adapter, &addr_data, pcf8563_probe);
+-}
+-
+-static struct i2c_driver pcf8563_driver = {
+- .driver = {
+- .name = "pcf8563",
+- },
+- .id = I2C_DRIVERID_PCF8563,
+- .attach_adapter = &pcf8563_attach,
+- .detach_client = &pcf8563_detach,
+-};
+-
+-static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind)
++static int pcf8563_probe(struct i2c_client *client)
+ {
+ struct pcf8563 *pcf8563;
+- struct i2c_client *client;
+- struct rtc_device *rtc;
+
+ int err = 0;
+
+- dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
++ dev_dbg(&client->dev, "%s\n", __FUNCTION__);
+
+- if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
+- err = -ENODEV;
+- goto exit;
+- }
++ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
++ return -ENODEV;
+
+- if (!(pcf8563 = kzalloc(sizeof(struct pcf8563), GFP_KERNEL))) {
+- err = -ENOMEM;
+- goto exit;
+- }
+-
+- client = &pcf8563->client;
+- client->addr = address;
+- client->driver = &pcf8563_driver;
+- client->adapter = adapter;
+-
+- strlcpy(client->name, pcf8563_driver.driver.name, I2C_NAME_SIZE);
++ if (!(pcf8563 = kzalloc(sizeof(struct pcf8563), GFP_KERNEL)))
++ return -ENOMEM;
+
+ /* Verify the chip is really an PCF8563 */
+- if (kind < 0) {
+- if (pcf8563_validate_client(client) < 0) {
+- err = -ENODEV;
+- goto exit_kfree;
+- }
+- }
+-
+- /* Inform the i2c layer */
+- if ((err = i2c_attach_client(client)))
++ if (pcf8563_validate_client(client) < 0) {
++ err = -ENODEV;
+ goto exit_kfree;
++ }
+
+ dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
+
+- rtc = rtc_device_register(pcf8563_driver.driver.name, &client->dev,
++ pcf8563->rtc = rtc_device_register(pcf8563_driver.driver.name, &client->dev,
+ &pcf8563_rtc_ops, THIS_MODULE);
+
+- if (IS_ERR(rtc)) {
+- err = PTR_ERR(rtc);
+- goto exit_detach;
++ if (IS_ERR(pcf8563->rtc)) {
++ err = PTR_ERR(pcf8563->rtc);
++ goto exit_kfree;
+ }
+
+- i2c_set_clientdata(client, rtc);
++ i2c_set_clientdata(client, pcf8563);
+
+ return 0;
+
+-exit_detach:
+- i2c_detach_client(client);
+-
+ exit_kfree:
+ kfree(pcf8563);
+
+-exit:
+ return err;
+ }
+
+-static int pcf8563_detach(struct i2c_client *client)
++static int pcf8563_remove(struct i2c_client *client)
+ {
+- struct pcf8563 *pcf8563 = container_of(client, struct pcf8563, client);
+- int err;
+- struct rtc_device *rtc = i2c_get_clientdata(client);
++ struct pcf8563 *pcf8563 = i2c_get_clientdata(client);
+
+- if (rtc)
+- rtc_device_unregister(rtc);
+-
+- if ((err = i2c_detach_client(client)))
+- return err;
++ if (pcf8563->rtc)
++ rtc_device_unregister(pcf8563->rtc);
+
+ kfree(pcf8563);
+
+ return 0;
+ }
+
++static struct i2c_driver pcf8563_driver = {
++ .driver = {
++ .name = "rtc-pcf8563",
++ },
++ .probe = pcf8563_probe,
++ .remove = pcf8563_remove,
++};
++
+ static int __init pcf8563_init(void)
+ {
+ return i2c_add_driver(&pcf8563_driver);
--- /dev/null
+---
+ drivers/rtc/rtc-x1205.c | 128 ++++++++++++++++--------------------------------
+ 1 file changed, 43 insertions(+), 85 deletions(-)
+
+Index: linux-2.6.25-rc6-armeb/drivers/rtc/rtc-x1205.c
+===================================================================
+--- linux-2.6.25-rc6-armeb.orig/drivers/rtc/rtc-x1205.c 2008-03-20 10:24:13.000000000 +1030
++++ linux-2.6.25-rc6-armeb/drivers/rtc/rtc-x1205.c 2008-03-20 10:24:23.000000000 +1030
+@@ -22,20 +22,7 @@
+ #include <linux/rtc.h>
+ #include <linux/delay.h>
+
+-#define DRV_VERSION "1.0.7"
+-
+-/* Addresses to scan: none. This chip is located at
+- * 0x6f and uses a two bytes register addressing.
+- * Two bytes need to be written to read a single register,
+- * while most other chips just require one and take the second
+- * one as the data to be written. To prevent corrupting
+- * unknown chips, the user must explicitly set the probe parameter.
+- */
+-
+-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
+-
+-/* Insmod parameters */
+-I2C_CLIENT_INSMOD;
++#define DRV_VERSION "1.0.8"
+
+ /* offsets into CCR area */
+
+@@ -91,19 +78,7 @@
+
+ #define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
+
+-/* Prototypes */
+-static int x1205_attach(struct i2c_adapter *adapter);
+-static int x1205_detach(struct i2c_client *client);
+-static int x1205_probe(struct i2c_adapter *adapter, int address, int kind);
+-
+-static struct i2c_driver x1205_driver = {
+- .driver = {
+- .name = "x1205",
+- },
+- .id = I2C_DRIVERID_X1205,
+- .attach_adapter = &x1205_attach,
+- .detach_client = &x1205_detach,
+-};
++static struct i2c_driver x1205_driver;
+
+ /*
+ * In the routines that deal directly with the x1205 hardware, we use
+@@ -497,58 +472,51 @@
+ }
+ static DEVICE_ATTR(dtrim, S_IRUGO, x1205_sysfs_show_dtrim, NULL);
+
+-static int x1205_attach(struct i2c_adapter *adapter)
++static int x1205_sysfs_register(struct device *dev)
++{
++ int err;
++
++ err = device_create_file(dev, &dev_attr_atrim);
++ if (err)
++ return err;
++
++ err = device_create_file(dev, &dev_attr_dtrim);
++ if (err)
++ device_remove_file(dev, &dev_attr_atrim);
++
++ return err;
++}
++
++static void x1205_sysfs_unregister(struct device *dev)
+ {
+- return i2c_probe(adapter, &addr_data, x1205_probe);
++ device_remove_file(dev, &dev_attr_atrim);
++ device_remove_file(dev, &dev_attr_dtrim);
+ }
+
+-static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
++
++static int x1205_probe(struct i2c_client *client)
+ {
+ int err = 0;
+ unsigned char sr;
+- struct i2c_client *client;
+ struct rtc_device *rtc;
+
+- dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
++ dev_dbg(&client->dev, "%s\n", __FUNCTION__);
+
+- if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
+- err = -ENODEV;
+- goto exit;
++ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
++ return -ENODEV;
+ }
+
+- if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
+- err = -ENOMEM;
+- goto exit;
++ if (x1205_validate_client(client) < 0) {
++ return -ENODEV;
+ }
+
+- /* I2C client */
+- client->addr = address;
+- client->driver = &x1205_driver;
+- client->adapter = adapter;
+-
+- strlcpy(client->name, x1205_driver.driver.name, I2C_NAME_SIZE);
+-
+- /* Verify the chip is really an X1205 */
+- if (kind < 0) {
+- if (x1205_validate_client(client) < 0) {
+- err = -ENODEV;
+- goto exit_kfree;
+- }
+- }
+-
+- /* Inform the i2c layer */
+- if ((err = i2c_attach_client(client)))
+- goto exit_kfree;
+-
+ dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
+
+ rtc = rtc_device_register(x1205_driver.driver.name, &client->dev,
+ &x1205_rtc_ops, THIS_MODULE);
+
+- if (IS_ERR(rtc)) {
+- err = PTR_ERR(rtc);
+- goto exit_detach;
+- }
++ if (IS_ERR(rtc))
++ return PTR_ERR(rtc);
+
+ i2c_set_clientdata(client, rtc);
+
+@@ -565,45 +533,35 @@
+ else
+ dev_err(&client->dev, "couldn't read status\n");
+
+- err = device_create_file(&client->dev, &dev_attr_atrim);
+- if (err) goto exit_devreg;
+- err = device_create_file(&client->dev, &dev_attr_dtrim);
+- if (err) goto exit_atrim;
++ err = x1205_sysfs_register(&client->dev);
++ if (err)
++ goto exit_devreg;
+
+ return 0;
+
+-exit_atrim:
+- device_remove_file(&client->dev, &dev_attr_atrim);
+-
+ exit_devreg:
+ rtc_device_unregister(rtc);
+
+-exit_detach:
+- i2c_detach_client(client);
+-
+-exit_kfree:
+- kfree(client);
+-
+-exit:
+ return err;
+ }
+
+-static int x1205_detach(struct i2c_client *client)
++static int x1205_remove(struct i2c_client *client)
+ {
+- int err;
+ struct rtc_device *rtc = i2c_get_clientdata(client);
+
+- if (rtc)
+- rtc_device_unregister(rtc);
+-
+- if ((err = i2c_detach_client(client)))
+- return err;
+-
+- kfree(client);
+-
++ rtc_device_unregister(rtc);
++ x1205_sysfs_unregister(&client->dev);
+ return 0;
+ }
+
++static struct i2c_driver x1205_driver = {
++ .driver = {
++ .name = "rtc-x1205",
++ },
++ .probe = x1205_probe,
++ .remove = x1205_remove,
++};
++
+ static int __init x1205_init(void)
+ {
+ return i2c_add_driver(&x1205_driver);
--- /dev/null
+From: Rod Whitby <rod@whitby.id.au>
+Subject: [PATCH] ixp4xx: Add support for the Freecom FSG-3 board (Patch #4874)
+
+The Freecom-FSG3 is a small network-attached-storage device with the
+following feature set:
+
+* Intel IXP422
+* 4MB Flash (ixp4xx flash driver)
+* 64MB RAM
+* 4 USB 2.0 host ports (ehci and ohci drivers)
+* 1 WAN (eth1) and 3 LAN (eth0) ethernet ports
+ * Supported by the open source ixp4xx ethernet driver
+* Via VT6421 disk controller (libata and sata-via drivers)
+ * Internal hard disk (PATA supported, SATA not yet supported)
+ * External SATA port (not yet supported)
+* ISL1208 RTC chip
+* Winbond 83782 temp sensor and fan controller
+* MiniPCI slot
+
+The ixp4xx_defconfig is also updated to support this device (the
+leds-fsg driver is to be submitted separately via the leds tree after
+this initial support is merged, as it depends on header gpio defines).
+
+Signed-off-by: Rod Whitby <rod@whitby.id.au>
+
+PATCH FOLLOWS
+KernelVersion: v2.6.25-rc6-74-g264e3e8
+---
+
+Updated to correct all issues found by RMK.
+
+The front power button calls ctrl_alt_del() and the rear reset button
+now calls machine_restart() directly.
+
+ arch/arm/configs/ixp4xx_defconfig | 9 +-
+ arch/arm/mach-ixp4xx/Kconfig | 9 +
+ arch/arm/mach-ixp4xx/Makefile | 2 +
+ arch/arm/mach-ixp4xx/fsg-pci.c | 71 ++++++++
+ arch/arm/mach-ixp4xx/fsg-setup.c | 276 ++++++++++++++++++++++++++++++++
+ include/asm-arm/arch-ixp4xx/fsg.h | 50 ++++++
+ include/asm-arm/arch-ixp4xx/hardware.h | 1 +
+ include/asm-arm/arch-ixp4xx/irqs.h | 7 +
+ 8 files changed, 421 insertions(+), 4 deletions(-)
+ create mode 100644 arch/arm/mach-ixp4xx/fsg-pci.c
+ create mode 100644 arch/arm/mach-ixp4xx/fsg-setup.c
+ create mode 100644 include/asm-arm/arch-ixp4xx/fsg.h
+
+diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
+index efa0485..fc14932 100644
+--- a/arch/arm/configs/ixp4xx_defconfig
++++ b/arch/arm/configs/ixp4xx_defconfig
+@@ -165,6 +165,7 @@ CONFIG_ARCH_PRPMC1100=y
+ CONFIG_MACH_NAS100D=y
+ CONFIG_MACH_DSMG600=y
+ CONFIG_ARCH_IXDP4XX=y
++CONFIG_MACH_FSG=y
+ CONFIG_CPU_IXP46X=y
+ CONFIG_CPU_IXP43X=y
+ CONFIG_MACH_GTWX5715=y
+@@ -770,7 +771,7 @@ CONFIG_ATA=y
+ # CONFIG_SATA_SIL24 is not set
+ # CONFIG_SATA_SIS is not set
+ # CONFIG_SATA_ULI is not set
+-# CONFIG_SATA_VIA is not set
++CONFIG_SATA_VIA=y
+ # CONFIG_SATA_VITESSE is not set
+ # CONFIG_SATA_INIC162X is not set
+ # CONFIG_PATA_ALI is not set
+@@ -1143,7 +1144,7 @@ CONFIG_HWMON=y
+ # CONFIG_SENSORS_VIA686A is not set
+ # CONFIG_SENSORS_VT1211 is not set
+ # CONFIG_SENSORS_VT8231 is not set
+-# CONFIG_SENSORS_W83781D is not set
++CONFIG_SENSORS_W83781D=y
+ # CONFIG_SENSORS_W83791D is not set
+ # CONFIG_SENSORS_W83792D is not set
+ # CONFIG_SENSORS_W83793 is not set
+@@ -1334,8 +1335,8 @@ CONFIG_LEDS_CLASS=y
+ #
+ # LED drivers
+ #
+-# CONFIG_LEDS_IXP4XX is not set
+ CONFIG_LEDS_GPIO=y
++CONFIG_LEDS_FSG=y
+
+ #
+ # LED Triggers
+@@ -1367,7 +1368,7 @@ CONFIG_RTC_INTF_DEV=y
+ # CONFIG_RTC_DRV_DS1672 is not set
+ # CONFIG_RTC_DRV_MAX6900 is not set
+ # CONFIG_RTC_DRV_RS5C372 is not set
+-# CONFIG_RTC_DRV_ISL1208 is not set
++CONFIG_RTC_DRV_ISL1208=y
+ CONFIG_RTC_DRV_X1205=y
+ CONFIG_RTC_DRV_PCF8563=y
+ # CONFIG_RTC_DRV_PCF8583 is not set
+diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
+index e774447..db8b5fe 100644
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -125,6 +125,15 @@ config ARCH_IXDP4XX
+ depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
+ default y
+
++config MACH_FSG
++ bool
++ prompt "Freecom FSG-3"
++ select PCI
++ help
++ Say 'Y' here if you want your kernel to support Freecom's
++ FSG-3 device. For more information on this platform,
++ see http://www.nslu2-linux.org/wiki/FSG3/HomePage
++
+ #
+ # Certain registers and IRQs are only enabled if supporting IXP465 CPUs
+ #
+diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
+index c195688..2e6bbf9 100644
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -15,6 +15,7 @@ obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
+ obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
+ obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
+ obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
++obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
+
+ obj-y += common.o
+
+@@ -28,6 +29,7 @@ obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o
+ obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o
+ obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
+ obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
++obj-$(CONFIG_MACH_FSG) += fsg-setup.o
+
+ obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
+diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c
+new file mode 100644
+index 0000000..f19f3f6
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/fsg-pci.c
+@@ -0,0 +1,71 @@
++/*
++ * arch/arch/mach-ixp4xx/fsg-pci.c
++ *
++ * FSG board-level PCI initialization
++ *
++ * Author: Rod Whitby <rod@whitby.id.au>
++ * Maintainer: http://www.nslu2-linux.org/
++ *
++ * based on ixdp425-pci.c:
++ * Copyright (C) 2002 Intel Corporation.
++ * Copyright (C) 2003-2004 MontaVista Software, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach/pci.h>
++#include <asm/mach-types.h>
++
++void __init fsg_pci_preinit(void)
++{
++ set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW);
++ set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW);
++ set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW);
++
++ ixp4xx_pci_preinit();
++}
++
++static int __init fsg_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++ static int pci_irq_table[FSG_PCI_IRQ_LINES] = {
++ IRQ_FSG_PCI_INTC,
++ IRQ_FSG_PCI_INTB,
++ IRQ_FSG_PCI_INTA,
++ };
++
++ int irq = -1;
++ slot = slot - 11;
++
++ if (slot >= 1 && slot <= FSG_PCI_MAX_DEV &&
++ pin >= 1 && pin <= FSG_PCI_IRQ_LINES)
++ irq = pci_irq_table[(slot - 1)];
++ printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n",
++ __func__, slot, pin, irq);
++
++ return irq;
++}
++
++struct hw_pci fsg_pci __initdata = {
++ .nr_controllers = 1,
++ .preinit = fsg_pci_preinit,
++ .swizzle = pci_std_swizzle,
++ .setup = ixp4xx_setup,
++ .scan = ixp4xx_scan_bus,
++ .map_irq = fsg_map_irq,
++};
++
++int __init fsg_pci_init(void)
++{
++ if (machine_is_fsg())
++ pci_common_init(&fsg_pci);
++ return 0;
++}
++
++subsys_initcall(fsg_pci_init);
+diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
+new file mode 100644
+index 0000000..0db3a90
+--- /dev/null
++++ b/arch/arm/mach-ixp4xx/fsg-setup.c
+@@ -0,0 +1,276 @@
++/*
++ * arch/arm/mach-ixp4xx/fsg-setup.c
++ *
++ * FSG board-setup
++ *
++ * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
++ *
++ * based on ixdp425-setup.c:
++ * Copyright (C) 2003-2004 MontaVista Software, Inc.
++ * based on nslu2-power.c
++ * Copyright (C) 2005 Tower Technologies
++ *
++ * Author: Rod Whitby <rod@whitby.id.au>
++ * Maintainers: http://www.nslu2-linux.org/
++ *
++ */
++
++#include <linux/if_ether.h>
++#include <linux/irq.h>
++#include <linux/serial.h>
++#include <linux/serial_8250.h>
++#include <linux/leds.h>
++#include <linux/reboot.h>
++#include <linux/i2c.h>
++#include <linux/i2c-gpio.h>
++
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++#include <asm/io.h>
++#include <asm/gpio.h>
++
++static struct flash_platform_data fsg_flash_data = {
++ .map_name = "cfi_probe",
++ .width = 2,
++};
++
++static struct resource fsg_flash_resource = {
++ .flags = IORESOURCE_MEM,
++};
++
++static struct platform_device fsg_flash = {
++ .name = "IXP4XX-Flash",
++ .id = 0,
++ .dev = {
++ .platform_data = &fsg_flash_data,
++ },
++ .num_resources = 1,
++ .resource = &fsg_flash_resource,
++};
++
++static struct i2c_gpio_platform_data fsg_i2c_gpio_data = {
++ .sda_pin = FSG_SDA_PIN,
++ .scl_pin = FSG_SCL_PIN,
++};
++
++static struct platform_device fsg_i2c_gpio = {
++ .name = "i2c-gpio",
++ .id = 0,
++ .dev = {
++ .platform_data = &fsg_i2c_gpio_data,
++ },
++};
++
++static struct i2c_board_info __initdata fsg_i2c_board_info [] = {
++ {
++ I2C_BOARD_INFO("rtc-isl1208", 0x6f),
++ },
++};
++
++static struct resource fsg_uart_resources[] = {
++ {
++ .start = IXP4XX_UART1_BASE_PHYS,
++ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .start = IXP4XX_UART2_BASE_PHYS,
++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM,
++ }
++};
++
++static struct plat_serial8250_port fsg_uart_data[] = {
++ {
++ .mapbase = IXP4XX_UART1_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART1,
++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ {
++ .mapbase = IXP4XX_UART2_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART2,
++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ { }
++};
++
++static struct platform_device fsg_uart = {
++ .name = "serial8250",
++ .id = PLAT8250_DEV_PLATFORM,
++ .dev = {
++ .platform_data = fsg_uart_data,
++ },
++ .num_resources = ARRAY_SIZE(fsg_uart_resources),
++ .resource = fsg_uart_resources,
++};
++
++static struct platform_device fsg_leds = {
++ .name = "fsg-led",
++ .id = -1,
++};
++
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info fsg_plat_eth[] = {
++ {
++ .phy = 5,
++ .rxq = 3,
++ .txreadyq = 20,
++ }, {
++ .phy = 4,
++ .rxq = 4,
++ .txreadyq = 21,
++ }
++};
++
++static struct platform_device fsg_eth[] = {
++ {
++ .name = "ixp4xx_eth",
++ .id = IXP4XX_ETH_NPEB,
++ .dev = {
++ .platform_data = fsg_plat_eth,
++ },
++ }, {
++ .name = "ixp4xx_eth",
++ .id = IXP4XX_ETH_NPEC,
++ .dev = {
++ .platform_data = fsg_plat_eth + 1,
++ },
++ }
++};
++
++static struct platform_device *fsg_devices[] __initdata = {
++ &fsg_i2c_gpio,
++ &fsg_flash,
++ &fsg_leds,
++ &fsg_eth[0],
++ &fsg_eth[1],
++};
++
++static irqreturn_t fsg_power_handler(int irq, void *dev_id)
++{
++ /* Signal init to do the ctrlaltdel action, this will bypass init if
++ * it hasn't started and do a kernel_restart.
++ */
++ ctrl_alt_del();
++
++ return IRQ_HANDLED;
++}
++
++static irqreturn_t fsg_reset_handler(int irq, void *dev_id)
++{
++ /* This is the paper-clip reset which does an emergency reboot. */
++ printk(KERN_INFO "Restarting system.\n");
++ machine_restart(NULL);
++
++ /* This should never be reached. */
++ return IRQ_HANDLED;
++}
++
++static void __init fsg_init(void)
++{
++ DECLARE_MAC_BUF(mac_buf);
++ uint8_t __iomem *f;
++ int i;
++
++ ixp4xx_sys_init();
++
++ fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++ fsg_flash_resource.end =
++ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
++
++ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++ /* Configure CS2 for operation, 8bit and writable */
++ *IXP4XX_EXP_CS2 = 0xbfff0002;
++
++ i2c_register_board_info(0, fsg_i2c_board_info,
++ ARRAY_SIZE(fsg_i2c_board_info));
++
++ /* This is only useful on a modified machine, but it is valuable
++ * to have it first in order to see debug messages, and so that
++ * it does *not* get removed if platform_add_devices fails!
++ */
++ (void)platform_device_register(&fsg_uart);
++
++ platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices));
++
++ if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler,
++ IRQF_DISABLED | IRQF_TRIGGER_LOW,
++ "FSG reset button", NULL) < 0) {
++
++ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
++ gpio_to_irq(FSG_RB_GPIO));
++ }
++
++ if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler,
++ IRQF_DISABLED | IRQF_TRIGGER_LOW,
++ "FSG power button", NULL) < 0) {
++
++ printk(KERN_DEBUG "Power Button IRQ %d not available\n",
++ gpio_to_irq(FSG_SB_GPIO));
++ }
++
++ /*
++ * Map in a portion of the flash and read the MAC addresses.
++ * Since it is stored in BE in the flash itself, we need to
++ * byteswap it if we're in LE mode.
++ */
++ f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000);
++ if (f) {
++#ifdef __ARMEB__
++ for (i = 0; i < 6; i++) {
++ fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i);
++ fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i);
++ }
++#else
++
++ /*
++ Endian-swapped reads from unaligned addresses are
++ required to extract the two MACs from the big-endian
++ Redboot config area in flash.
++ */
++
++ fsg_plat_eth[0].hwaddr[0] = readb(f + 0x3C0421);
++ fsg_plat_eth[0].hwaddr[1] = readb(f + 0x3C0420);
++ fsg_plat_eth[0].hwaddr[2] = readb(f + 0x3C0427);
++ fsg_plat_eth[0].hwaddr[3] = readb(f + 0x3C0426);
++ fsg_plat_eth[0].hwaddr[4] = readb(f + 0x3C0425);
++ fsg_plat_eth[0].hwaddr[5] = readb(f + 0x3C0424);
++
++ fsg_plat_eth[1].hwaddr[0] = readb(f + 0x3C0439);
++ fsg_plat_eth[1].hwaddr[1] = readb(f + 0x3C043F);
++ fsg_plat_eth[1].hwaddr[2] = readb(f + 0x3C043E);
++ fsg_plat_eth[1].hwaddr[3] = readb(f + 0x3C043D);
++ fsg_plat_eth[1].hwaddr[4] = readb(f + 0x3C043C);
++ fsg_plat_eth[1].hwaddr[5] = readb(f + 0x3C0443);
++#endif
++ iounmap(f);
++ }
++ printk(KERN_INFO "FSG: Using MAC address %s for port 0\n",
++ print_mac(mac_buf, fsg_plat_eth[0].hwaddr));
++ printk(KERN_INFO "FSG: Using MAC address %s for port 1\n",
++ print_mac(mac_buf, fsg_plat_eth[1].hwaddr));
++
++}
++
++MACHINE_START(FSG, "Freecom FSG-3")
++ /* Maintainer: www.nslu2-linux.org */
++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++ .map_io = ixp4xx_map_io,
++ .init_irq = ixp4xx_init_irq,
++ .timer = &ixp4xx_timer,
++ .boot_params = 0x0100,
++ .init_machine = fsg_init,
++MACHINE_END
++
+diff --git a/include/asm-arm/arch-ixp4xx/fsg.h b/include/asm-arm/arch-ixp4xx/fsg.h
+new file mode 100644
+index 0000000..c0100cc
+--- /dev/null
++++ b/include/asm-arm/arch-ixp4xx/fsg.h
+@@ -0,0 +1,50 @@
++/*
++ * include/asm-arm/arch-ixp4xx/fsg.h
++ *
++ * Freecom FSG-3 platform specific definitions
++ *
++ * Author: Rod Whitby <rod@whitby.id.au>
++ * Author: Tomasz Chmielewski <mangoo@wpkg.org>
++ * Maintainers: http://www.nslu2-linux.org
++ *
++ * Based on coyote.h by
++ * Copyright 2004 (c) MontaVista, Software, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#ifndef __ASM_ARCH_HARDWARE_H__
++#error "Do not include this directly, instead #include <asm/hardware.h>"
++#endif
++
++#define FSG_SDA_PIN 12
++#define FSG_SCL_PIN 13
++
++/*
++ * FSG PCI IRQs
++ */
++#define FSG_PCI_MAX_DEV 3
++#define FSG_PCI_IRQ_LINES 3
++
++
++/* PCI controller GPIO to IRQ pin mappings */
++#define FSG_PCI_INTA_PIN 6
++#define FSG_PCI_INTB_PIN 7
++#define FSG_PCI_INTC_PIN 5
++
++/* Buttons */
++
++#define FSG_SB_GPIO 4 /* sync button */
++#define FSG_RB_GPIO 9 /* reset button */
++#define FSG_UB_GPIO 10 /* usb button */
++
++/* LEDs */
++
++#define FSG_LED_WLAN_BIT 0
++#define FSG_LED_WAN_BIT 1
++#define FSG_LED_SATA_BIT 2
++#define FSG_LED_USB_BIT 4
++#define FSG_LED_RING_BIT 5
++#define FSG_LED_SYNC_BIT 7
+diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h
+index 73e8dc3..fa723a6 100644
+--- a/include/asm-arm/arch-ixp4xx/hardware.h
++++ b/include/asm-arm/arch-ixp4xx/hardware.h
+@@ -45,5 +45,6 @@
+ #include "nslu2.h"
+ #include "nas100d.h"
+ #include "dsmg600.h"
++#include "fsg.h"
+
+ #endif /* _ASM_ARCH_HARDWARE_H */
+diff --git a/include/asm-arm/arch-ixp4xx/irqs.h b/include/asm-arm/arch-ixp4xx/irqs.h
+index 1180160..674af4a 100644
+--- a/include/asm-arm/arch-ixp4xx/irqs.h
++++ b/include/asm-arm/arch-ixp4xx/irqs.h
+@@ -128,4 +128,11 @@
+ #define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7
+ #define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6
+
++/*
++ * Freecom FSG-3 Board IRQs
++ */
++#define IRQ_FSG_PCI_INTA IRQ_IXP4XX_GPIO6
++#define IRQ_FSG_PCI_INTB IRQ_IXP4XX_GPIO7
++#define IRQ_FSG_PCI_INTC IRQ_IXP4XX_GPIO5
++
+ #endif
+--
+1.5.2.5
+
--- /dev/null
+From a66e34fefb3f8142d7f16808563eb610225f6e77 Mon Sep 17 00:00:00 2001
+From: Rod Whitby <rod@whitby.id.au>
+Date: Tue, 29 Jan 2008 23:17:42 +1030
+Subject: [PATCH] leds: Add new driver for the LEDs on the Freecom FSG-3
+
+The LEDs on the Freecom FSG-3 are connected to an external
+memory-mapped latch on the ixp4xx expansion bus, and therefore cannot
+be supported by any of the existing LEDs drivers.
+
+Signed-off-by: Rod Whitby <rod@whitby.id.au>
+--
+PATCH FOLLOWS
+KernelVersion: v2.6.25-rc6-117-g457fb60
+---
+ drivers/leds/Kconfig | 6 +
+ drivers/leds/Makefile | 1 +
+ drivers/leds/leds-fsg.c | 261 +++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 268 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/leds/leds-fsg.c
+
+diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
+index 859814f..aefbe04 100644
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -46,6 +46,12 @@ config LEDS_SPITZ
+ This option enables support for the LEDs on Sharp Zaurus
+ SL-Cxx00 series (C1000, C3000, C3100).
+
++config LEDS_FSG
++ tristate "LED Support for the Freecom FSG-3"
++ depends on LEDS_CLASS && MACH_FSG
++ help
++ This option enables support for the LEDs on the Freecom FSG-3.
++
+ config LEDS_TOSA
+ tristate "LED Support for the Sharp SL-6000 series"
+ depends on LEDS_CLASS && PXA_SHARPSL
+diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
+index 84ced3b..b17bd91 100644
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -21,6 +21,7 @@ obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
+ obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o
+ obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
+ obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
++obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
+
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
+diff --git a/drivers/leds/leds-fsg.c b/drivers/leds/leds-fsg.c
+new file mode 100644
+index 0000000..a7421b8
+--- /dev/null
++++ b/drivers/leds/leds-fsg.c
+@@ -0,0 +1,261 @@
++/*
++ * LED Driver for the Freecom FSG-3
++ *
++ * Copyright (c) 2008 Rod Whitby <rod@whitby.id.au>
++ *
++ * Author: Rod Whitby <rod@whitby.id.au>
++ *
++ * Based on leds-spitz.c
++ * Copyright 2005-2006 Openedhand Ltd.
++ * Author: Richard Purdie <rpurdie@openedhand.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <asm/arch/hardware.h>
++#include <asm/io.h>
++
++static short __iomem *latch_address;
++static unsigned short latch_value;
++
++
++static void fsg_led_wlan_set(struct led_classdev *led_cdev,
++ enum led_brightness value)
++{
++ if (value) {
++ latch_value &= ~(1 << FSG_LED_WLAN_BIT);
++ *latch_address = latch_value;
++ } else {
++ latch_value |= (1 << FSG_LED_WLAN_BIT);
++ *latch_address = latch_value;
++ }
++}
++
++static void fsg_led_wan_set(struct led_classdev *led_cdev,
++ enum led_brightness value)
++{
++ if (value) {
++ latch_value &= ~(1 << FSG_LED_WAN_BIT);
++ *latch_address = latch_value;
++ } else {
++ latch_value |= (1 << FSG_LED_WAN_BIT);
++ *latch_address = latch_value;
++ }
++}
++
++static void fsg_led_sata_set(struct led_classdev *led_cdev,
++ enum led_brightness value)
++{
++ if (value) {
++ latch_value &= ~(1 << FSG_LED_SATA_BIT);
++ *latch_address = latch_value;
++ } else {
++ latch_value |= (1 << FSG_LED_SATA_BIT);
++ *latch_address = latch_value;
++ }
++}
++
++static void fsg_led_usb_set(struct led_classdev *led_cdev,
++ enum led_brightness value)
++{
++ if (value) {
++ latch_value &= ~(1 << FSG_LED_USB_BIT);
++ *latch_address = latch_value;
++ } else {
++ latch_value |= (1 << FSG_LED_USB_BIT);
++ *latch_address = latch_value;
++ }
++}
++
++static void fsg_led_sync_set(struct led_classdev *led_cdev,
++ enum led_brightness value)
++{
++ if (value) {
++ latch_value &= ~(1 << FSG_LED_SYNC_BIT);
++ *latch_address = latch_value;
++ } else {
++ latch_value |= (1 << FSG_LED_SYNC_BIT);
++ *latch_address = latch_value;
++ }
++}
++
++static void fsg_led_ring_set(struct led_classdev *led_cdev,
++ enum led_brightness value)
++{
++ if (value) {
++ latch_value &= ~(1 << FSG_LED_RING_BIT);
++ *latch_address = latch_value;
++ } else {
++ latch_value |= (1 << FSG_LED_RING_BIT);
++ *latch_address = latch_value;
++ }
++}
++
++
++
++static struct led_classdev fsg_wlan_led = {
++ .name = "fsg:blue:wlan",
++ .brightness_set = fsg_led_wlan_set,
++};
++
++static struct led_classdev fsg_wan_led = {
++ .name = "fsg:blue:wan",
++ .brightness_set = fsg_led_wan_set,
++};
++
++static struct led_classdev fsg_sata_led = {
++ .name = "fsg:blue:sata",
++ .brightness_set = fsg_led_sata_set,
++};
++
++static struct led_classdev fsg_usb_led = {
++ .name = "fsg:blue:usb",
++ .brightness_set = fsg_led_usb_set,
++};
++
++static struct led_classdev fsg_sync_led = {
++ .name = "fsg:blue:sync",
++ .brightness_set = fsg_led_sync_set,
++};
++
++static struct led_classdev fsg_ring_led = {
++ .name = "fsg:blue:ring",
++ .brightness_set = fsg_led_ring_set,
++};
++
++
++
++#ifdef CONFIG_PM
++static int fsg_led_suspend(struct platform_device *dev, pm_message_t state)
++{
++ led_classdev_suspend(&fsg_wlan_led);
++ led_classdev_suspend(&fsg_wan_led);
++ led_classdev_suspend(&fsg_sata_led);
++ led_classdev_suspend(&fsg_usb_led);
++ led_classdev_suspend(&fsg_sync_led);
++ led_classdev_suspend(&fsg_ring_led);
++ return 0;
++}
++
++static int fsg_led_resume(struct platform_device *dev)
++{
++ led_classdev_resume(&fsg_wlan_led);
++ led_classdev_resume(&fsg_wan_led);
++ led_classdev_resume(&fsg_sata_led);
++ led_classdev_resume(&fsg_usb_led);
++ led_classdev_resume(&fsg_sync_led);
++ led_classdev_resume(&fsg_ring_led);
++ return 0;
++}
++#endif
++
++
++static int fsg_led_probe(struct platform_device *pdev)
++{
++ int ret;
++
++ ret = led_classdev_register(&pdev->dev, &fsg_wlan_led);
++ if (ret < 0)
++ goto failwlan;
++
++ ret = led_classdev_register(&pdev->dev, &fsg_wan_led);
++ if (ret < 0)
++ goto failwan;
++
++ ret = led_classdev_register(&pdev->dev, &fsg_sata_led);
++ if (ret < 0)
++ goto failsata;
++
++ ret = led_classdev_register(&pdev->dev, &fsg_usb_led);
++ if (ret < 0)
++ goto failusb;
++
++ ret = led_classdev_register(&pdev->dev, &fsg_sync_led);
++ if (ret < 0)
++ goto failsync;
++
++ ret = led_classdev_register(&pdev->dev, &fsg_ring_led);
++ if (ret < 0)
++ goto failring;
++
++ /* Map the LED chip select address space */
++ latch_address = (unsigned short *) ioremap(IXP4XX_EXP_BUS_BASE(2), 512);
++ if (!latch_address) {
++ ret = -ENOMEM;
++ goto failremap;
++ }
++
++ latch_value = 0xffff;
++ *latch_address = latch_value;
++
++ return ret;
++
++ failremap:
++ led_classdev_unregister(&fsg_ring_led);
++ failring:
++ led_classdev_unregister(&fsg_sync_led);
++ failsync:
++ led_classdev_unregister(&fsg_usb_led);
++ failusb:
++ led_classdev_unregister(&fsg_sata_led);
++ failsata:
++ led_classdev_unregister(&fsg_wan_led);
++ failwan:
++ led_classdev_unregister(&fsg_wlan_led);
++ failwlan:
++
++ return ret;
++}
++
++static int fsg_led_remove(struct platform_device *pdev)
++{
++ iounmap(latch_address);
++
++ led_classdev_unregister(&fsg_wlan_led);
++ led_classdev_unregister(&fsg_wan_led);
++ led_classdev_unregister(&fsg_sata_led);
++ led_classdev_unregister(&fsg_usb_led);
++ led_classdev_unregister(&fsg_sync_led);
++ led_classdev_unregister(&fsg_ring_led);
++
++ return 0;
++}
++
++
++static struct platform_driver fsg_led_driver = {
++ .probe = fsg_led_probe,
++ .remove = fsg_led_remove,
++#ifdef CONFIG_PM
++ .suspend = fsg_led_suspend,
++ .resume = fsg_led_resume,
++#endif
++ .driver = {
++ .name = "fsg-led",
++ },
++};
++
++
++static int __init fsg_led_init(void)
++{
++ return platform_driver_register(&fsg_led_driver);
++}
++
++static void __exit fsg_led_exit(void)
++{
++ platform_driver_unregister(&fsg_led_driver);
++}
++
++
++module_init(fsg_led_init);
++module_exit(fsg_led_exit);
++
++MODULE_AUTHOR("Rod Whitby <rod@whitby.id.au>");
++MODULE_DESCRIPTION("Freecom FSG-3 LED driver");
++MODULE_LICENSE("GPL");
+--
+1.5.2.5
+
--- /dev/null
+Index: linux-2.6.19/drivers/char/random.c
+===================================================================
+--- linux-2.6.19.orig/drivers/char/random.c
++++ linux-2.6.19/drivers/char/random.c
+@@ -248,9 +248,9 @@
+ /*
+ * Configuration information
+ */
+-#define INPUT_POOL_WORDS 128
+-#define OUTPUT_POOL_WORDS 32
+-#define SEC_XFER_SIZE 512
++#define INPUT_POOL_WORDS 256
++#define OUTPUT_POOL_WORDS 64
++#define SEC_XFER_SIZE 1024
+
+ /*
+ * The minimum number of bits of entropy before we wake up a read on
--- /dev/null
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/gateway7001-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/gateway7001-setup.c 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c 2007-10-22 15:09:33.000000000 +0200
+@@ -76,9 +76,36 @@
+ .resource = &gateway7001_uart_resource,
+ };
+
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info gateway7001_plat_eth[] = {
++ {
++ .phy = 1,
++ .rxq = 3,
++ .txreadyq = 20,
++ }, {
++ .phy = 2,
++ .rxq = 4,
++ .txreadyq = 21,
++ }
++};
++
++static struct platform_device gateway7001_eth[] = {
++ {
++ .name = "ixp4xx_eth",
++ .id = IXP4XX_ETH_NPEB,
++ .dev.platform_data = gateway7001_plat_eth,
++ }, {
++ .name = "ixp4xx_eth",
++ .id = IXP4XX_ETH_NPEC,
++ .dev.platform_data = gateway7001_plat_eth + 1,
++ }
++};
++
+ static struct platform_device *gateway7001_devices[] __initdata = {
+ &gateway7001_flash,
+- &gateway7001_uart
++ &gateway7001_uart,
++ &gateway7001_eth[0],
++ &gateway7001_eth[1],
+ };
+
+ static void __init gateway7001_init(void)
--- /dev/null
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/wg302v2-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/wg302v2-setup.c 2007-10-09 22:31:38.000000000 +0200
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c 2007-10-22 15:02:20.000000000 +0200
+@@ -77,9 +77,27 @@
+ .resource = &wg302v2_uart_resource,
+ };
+
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info wg302_plat_eth[] = {
++ {
++ .phy = 8,
++ .rxq = 3,
++ .txreadyq = 20,
++ }
++};
++
++static struct platform_device wg302_eth[] = {
++ {
++ .name = "ixp4xx_eth",
++ .id = IXP4XX_ETH_NPEB,
++ .dev.platform_data = wg302_plat_eth,
++ }
++};
++
+ static struct platform_device *wg302v2_devices[] __initdata = {
+ &wg302v2_flash,
+ &wg302v2_uart,
++ &wg302_eth[0],
+ };
+
+ static void __init wg302v2_init(void)
--- /dev/null
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Kconfig 2008-03-12 21:21:23.000000000 +1030
++++ linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig 2008-03-12 21:21:26.000000000 +1030
+@@ -57,6 +57,14 @@
+ WG302 v2 or WAG302 v2 Access Points. For more information
+ on this platform, see http://openwrt.org
+
++config MACH_PRONGHORNMETRO
++ bool "Pronghorn Metro"
++ select PCI
++ help
++ Say 'Y' here if you want your kernel to support the ADI
++ Engineering Pronghorn Metro Platform. For more
++ information on this platform, see <file:Documentation/arm/IXP4xx>.
++
+ config ARCH_IXDP425
+ bool "IXDP425"
+ help
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Makefile
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Makefile 2008-03-12 21:21:23.000000000 +1030
++++ linux-2.6.24/arch/arm/mach-ixp4xx/Makefile 2008-03-12 21:21:26.000000000 +1030
+@@ -16,6 +16,7 @@
+ obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
+ obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
+ obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
++obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
+
+ obj-y += common.o
+
+@@ -30,5 +31,6 @@
+ obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
+ obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
+ obj-$(CONFIG_MACH_FSG) += fsg-setup.o
++obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
+
+ obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.24/arch/arm/mach-ixp4xx/pronghornmetro-pci.c 2008-03-12 21:21:26.000000000 +1030
+@@ -0,0 +1,74 @@
++/*
++ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
++ *
++ * PCI setup routines for ADI Engineering Pronghorn Metro
++ *
++ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ * Copyright (C) 2002 Jungo Software Technologies.
++ * Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++
++#include <asm/mach/pci.h>
++
++extern void ixp4xx_pci_preinit(void);
++extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
++extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
++
++void __init pronghornmetro_pci_preinit(void)
++{
++ set_irq_type(IRQ_IXP4XX_GPIO4, IRQT_LOW);
++ set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
++ set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
++ set_irq_type(IRQ_IXP4XX_GPIO1, IRQT_LOW);
++
++ ixp4xx_pci_preinit();
++}
++
++static int __init pronghornmetro_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++ if (slot == 13)
++ return IRQ_IXP4XX_GPIO4;
++ else if (slot == 14)
++ return IRQ_IXP4XX_GPIO6;
++ else if (slot == 15)
++ return IRQ_IXP4XX_GPIO11;
++ else if (slot == 16)
++ return IRQ_IXP4XX_GPIO1;
++ else return -1;
++}
++
++struct hw_pci pronghornmetro_pci __initdata = {
++ .nr_controllers = 1,
++ .preinit = pronghornmetro_pci_preinit,
++ .swizzle = pci_std_swizzle,
++ .setup = ixp4xx_setup,
++ .scan = ixp4xx_scan_bus,
++ .map_irq = pronghornmetro_map_irq,
++};
++
++int __init pronghornmetro_pci_init(void)
++{
++ if (machine_is_pronghorn_metro())
++ pci_common_init(&pronghornmetro_pci);
++ return 0;
++}
++
++subsys_initcall(pronghornmetro_pci_init);
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.24/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2008-03-12 21:21:26.000000000 +1030
+@@ -0,0 +1,147 @@
++/*
++ * arch/arm/mach-ixp4xx/pronghornmetro-setup.c
++ *
++ * Board setup for the ADI Engineering Pronghorn Metro
++ *
++ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ * Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data pronghornmetro_flash_data = {
++ .map_name = "cfi_probe",
++ .width = 2,
++};
++
++static struct resource pronghornmetro_flash_resource = {
++ .flags = IORESOURCE_MEM,
++};
++
++static struct platform_device pronghornmetro_flash = {
++ .name = "IXP4XX-Flash",
++ .id = 0,
++ .dev = {
++ .platform_data = &pronghornmetro_flash_data,
++ },
++ .num_resources = 1,
++ .resource = &pronghornmetro_flash_resource,
++};
++
++static struct resource pronghornmetro_uart_resource = {
++ .start = IXP4XX_UART2_BASE_PHYS,
++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct plat_serial8250_port pronghornmetro_uart_data[] = {
++ {
++ .mapbase = IXP4XX_UART2_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART2,
++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ { },
++};
++
++static struct platform_device pronghornmetro_uart = {
++ .name = "serial8250",
++ .id = PLAT8250_DEV_PLATFORM,
++ .dev = {
++ .platform_data = pronghornmetro_uart_data,
++ },
++ .num_resources = 1,
++ .resource = &pronghornmetro_uart_resource,
++};
++
++static struct resource pronghornmetro_pata_resources[] = {
++ {
++ .flags = IORESOURCE_MEM
++ },
++ {
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .name = "intrq",
++ .start = IRQ_IXP4XX_GPIO0,
++ .end = IRQ_IXP4XX_GPIO0,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct ixp4xx_pata_data pronghornmetro_pata_data = {
++ .cs0_bits = 0xbfff0043,
++ .cs1_bits = 0xbfff0043,
++};
++
++static struct platform_device pronghornmetro_pata = {
++ .name = "pata_ixp4xx_cf",
++ .id = 0,
++ .dev.platform_data = &pronghornmetro_pata_data,
++ .num_resources = ARRAY_SIZE(pronghornmetro_pata_resources),
++ .resource = pronghornmetro_pata_resources,
++};
++
++static struct platform_device *pronghornmetro_devices[] __initdata = {
++ &pronghornmetro_flash,
++ &pronghornmetro_uart,
++};
++
++static void __init pronghornmetro_init(void)
++{
++ ixp4xx_sys_init();
++
++ pronghornmetro_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++ pronghornmetro_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
++
++ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++ platform_add_devices(pronghornmetro_devices, ARRAY_SIZE(pronghornmetro_devices));
++
++ pronghornmetro_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
++ pronghornmetro_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
++
++ pronghornmetro_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
++ pronghornmetro_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
++
++ pronghornmetro_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
++ pronghornmetro_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
++
++ platform_device_register(&pronghornmetro_pata);
++}
++
++#ifdef CONFIG_MACH_PRONGHORNMETRO
++MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro")
++ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++ .map_io = ixp4xx_map_io,
++ .init_irq = ixp4xx_init_irq,
++ .timer = &ixp4xx_timer,
++ .boot_params = 0x0100,
++ .init_machine = pronghornmetro_init,
++MACHINE_END
++#endif
+Index: linux-2.6.24/Documentation/arm/IXP4xx
+===================================================================
+--- linux-2.6.24.orig/Documentation/arm/IXP4xx 2008-03-12 21:20:48.000000000 +1030
++++ linux-2.6.24/Documentation/arm/IXP4xx 2008-03-12 21:21:26.000000000 +1030
+@@ -111,6 +111,9 @@
+ the platform has two mini-PCI slots used for 802.11[bga] cards.
+ Finally, there is an IDE port hanging off the expansion bus.
+
++ADI Engineering Pronghorn Metro Platform
++http://www.adiengineering.com/php-bin/ecomm4/productDisplay.php?category_id=30&product_id=85
++
+ Gateworks Avila Network Platform
+ http://www.gateworks.com/avila_sbc.htm
+
+Index: linux-2.6.24/include/asm-arm/arch-ixp4xx/uncompress.h
+===================================================================
+--- linux-2.6.24.orig/include/asm-arm/arch-ixp4xx/uncompress.h 2008-03-12 21:20:48.000000000 +1030
++++ linux-2.6.24/include/asm-arm/arch-ixp4xx/uncompress.h 2008-03-12 21:21:26.000000000 +1030
+@@ -41,7 +41,8 @@
+ * Some boards are using UART2 as console
+ */
+ if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
+- machine_is_gateway7001() || machine_is_wg302v2())
++ machine_is_gateway7001() || machine_is_wg302v2() ||
++ machine_is_pronghorn_metro())
+ uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ else
+ uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
--- /dev/null
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-10-22 15:41:27.000000000 +0200
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-10-22 15:43:30.000000000 +0200
+@@ -104,9 +104,36 @@
+ .resource = pronghornmetro_pata_resources,
+ };
+
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info pronghornmetro_plat_eth[] = {
++ {
++ .phy = 0,
++ .rxq = 3,
++ .txreadyq = 20,
++ }, {
++ .phy = 1,
++ .rxq = 4,
++ .txreadyq = 21,
++ }
++};
++
++static struct platform_device pronghornmetro_eth[] = {
++ {
++ .name = "ixp4xx_eth",
++ .id = IXP4XX_ETH_NPEB,
++ .dev.platform_data = pronghornmetro_plat_eth,
++ }, {
++ .name = "ixp4xx_eth",
++ .id = IXP4XX_ETH_NPEC,
++ .dev.platform_data = pronghornmetro_plat_eth + 1,
++ }
++};
++
+ static struct platform_device *pronghornmetro_devices[] __initdata = {
+ &pronghornmetro_flash,
+ &pronghornmetro_uart,
++ &pronghornmetro_eth[0],
++ &pronghornmetro_eth[1],
+ };
+
+ static void __init pronghornmetro_init(void)
--- /dev/null
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Kconfig 2008-03-12 21:21:26.000000000 +1030
++++ linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig 2008-03-12 21:21:26.000000000 +1030
+@@ -65,6 +65,14 @@
+ Engineering Pronghorn Metro Platform. For more
+ information on this platform, see <file:Documentation/arm/IXP4xx>.
+
++config MACH_COMPEX
++ bool "Compex WP18 / NP18A"
++ select PCI
++ help
++ Say 'Y' here if you want your kernel to support Compex'
++ WP18 or NP18A boards. For more information on this
++ platform, see http://openwrt.org
++
+ config ARCH_IXDP425
+ bool "IXDP425"
+ help
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Makefile
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Makefile 2008-03-12 21:21:26.000000000 +1030
++++ linux-2.6.24/arch/arm/mach-ixp4xx/Makefile 2008-03-12 21:21:26.000000000 +1030
+@@ -17,6 +17,7 @@
+ obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
+ obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
+ obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
++obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
+
+ obj-y += common.o
+
+@@ -32,5 +33,6 @@
+ obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
+ obj-$(CONFIG_MACH_FSG) += fsg-setup.o
+ obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
++obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
+
+ obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/compex-setup.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.24/arch/arm/mach-ixp4xx/compex-setup.c 2008-03-12 21:21:26.000000000 +1030
+@@ -0,0 +1,120 @@
++/*
++ * arch/arm/mach-ixp4xx/compex-setup.c
++ *
++ * Ccompex WP18 / NP18A board-setup
++ *
++ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
++ *
++ * based on ixdp425-setup.c:
++ * Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <asm/hardware.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data compex_flash_data = {
++ .map_name = "cfi_probe",
++ .width = 2,
++};
++
++static struct resource compex_flash_resource = {
++ .flags = IORESOURCE_MEM,
++};
++
++static struct platform_device compex_flash = {
++ .name = "IXP4XX-Flash",
++ .id = 0,
++ .dev = {
++ .platform_data = &compex_flash_data,
++ },
++ .num_resources = 1,
++ .resource = &compex_flash_resource,
++};
++
++static struct resource compex_uart_resources[] = {
++ {
++ .start = IXP4XX_UART1_BASE_PHYS,
++ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM
++ },
++ {
++ .start = IXP4XX_UART2_BASE_PHYS,
++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM
++ }
++};
++
++static struct plat_serial8250_port compex_uart_data[] = {
++ {
++ .mapbase = IXP4XX_UART1_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART1,
++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ {
++ .mapbase = IXP4XX_UART2_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART2,
++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ { },
++};
++
++static struct platform_device compex_uart = {
++ .name = "serial8250",
++ .id = PLAT8250_DEV_PLATFORM,
++ .dev.platform_data = compex_uart_data,
++ .num_resources = 2,
++ .resource = compex_uart_resources,
++};
++
++static struct platform_device *compex_devices[] __initdata = {
++ &compex_flash,
++ &compex_uart
++};
++
++static void __init compex_init(void)
++{
++ ixp4xx_sys_init();
++
++ compex_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++ compex_flash_resource.end =
++ IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++ platform_add_devices(compex_devices, ARRAY_SIZE(compex_devices));
++}
++
++#ifdef CONFIG_MACH_COMPEX
++MACHINE_START(COMPEX, "Compex WP18 / NP18A")
++ /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++ .map_io = ixp4xx_map_io,
++ .init_irq = ixp4xx_init_irq,
++ .timer = &ixp4xx_timer,
++ .boot_params = 0x0100,
++ .init_machine = compex_init,
++MACHINE_END
++#endif
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/ixdp425-pci.c
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/ixdp425-pci.c 2008-03-12 21:20:48.000000000 +1030
++++ linux-2.6.24/arch/arm/mach-ixp4xx/ixdp425-pci.c 2008-03-12 21:21:26.000000000 +1030
+@@ -66,7 +66,7 @@
+ int __init ixdp425_pci_init(void)
+ {
+ if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
+- machine_is_ixdp465() || machine_is_kixrp435())
++ machine_is_ixdp465() || machine_is_kixrp435() || machine_is_compex())
+ pci_common_init(&ixdp425_pci);
+ return 0;
+ }
+Index: linux-2.6.24/arch/arm/tools/mach-types
+===================================================================
+--- linux-2.6.24.orig/arch/arm/tools/mach-types 2008-03-12 21:20:48.000000000 +1030
++++ linux-2.6.24/arch/arm/tools/mach-types 2008-03-12 21:21:26.000000000 +1030
+@@ -1278,7 +1278,7 @@
+ smdk6400 MACH_SMDK6400 SMDK6400 1270
+ nokia_n800 MACH_NOKIA_N800 NOKIA_N800 1271
+ greenphone MACH_GREENPHONE GREENPHONE 1272
+-compex42x MACH_COMPEXWP18 COMPEXWP18 1273
++compex MACH_COMPEX COMPEX 1273
+ xmate MACH_XMATE XMATE 1274
+ energizer MACH_ENERGIZER ENERGIZER 1275
+ ime1 MACH_IME1 IME1 1276
--- /dev/null
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/compex-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/compex-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/compex-setup.c 2007-10-23 18:39:29.000000000 +0200
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/compex-setup.c 2007-10-23 18:45:34.000000000 +0200
+@@ -90,9 +90,36 @@
+ .resource = compex_uart_resources,
+ };
+
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info compex_plat_eth[] = {
++ {
++ .phy = -1,
++ .rxq = 3,
++ .txreadyq = 20,
++ }, {
++ .phy = 3,
++ .rxq = 4,
++ .txreadyq = 21,
++ }
++};
++
++static struct platform_device compex_eth[] = {
++ {
++ .name = "ixp4xx_eth",
++ .id = IXP4XX_ETH_NPEB,
++ .dev.platform_data = compex_plat_eth,
++ }, {
++ .name = "ixp4xx_eth",
++ .id = IXP4XX_ETH_NPEC,
++ .dev.platform_data = compex_plat_eth + 1,
++ }
++};
++
+ static struct platform_device *compex_devices[] __initdata = {
+ &compex_flash,
+- &compex_uart
++ &compex_uart,
++ &compex_eth[0],
++ &compex_eth[1],
+ };
+
+ static void __init compex_init(void)
--- /dev/null
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Kconfig 2008-03-12 21:21:26.000000000 +1030
++++ linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig 2008-03-12 21:21:27.000000000 +1030
+@@ -73,6 +73,14 @@
+ WP18 or NP18A boards. For more information on this
+ platform, see http://openwrt.org
+
++config MACH_WRT300NV2
++ bool "Linksys WRT300N v2"
++ select PCI
++ help
++ Say 'Y' here if you want your kernel to support Linksys'
++ WRT300N v2 router. For more information on this
++ platform, see http://openwrt.org
++
+ config ARCH_IXDP425
+ bool "IXDP425"
+ help
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Makefile
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Makefile 2008-03-12 21:21:26.000000000 +1030
++++ linux-2.6.24/arch/arm/mach-ixp4xx/Makefile 2008-03-12 21:21:27.000000000 +1030
+@@ -18,6 +18,7 @@
+ obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
+ obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
+ obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
++obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
+
+ obj-y += common.o
+
+@@ -34,5 +35,6 @@
+ obj-$(CONFIG_MACH_FSG) += fsg-setup.o
+ obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
+ obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
++obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
+
+ obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.24/arch/arm/mach-ixp4xx/wrt300nv2-pci.c 2008-03-12 21:21:27.000000000 +1030
+@@ -0,0 +1,65 @@
++/*
++ * arch/arch/mach-ixp4xx/wrt300nv2-pci.c
++ *
++ * PCI setup routines for Linksys WRT300N v2
++ *
++ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ * Copyright (C) 2002 Jungo Software Technologies.
++ * Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++
++#include <asm/mach/pci.h>
++
++extern void ixp4xx_pci_preinit(void);
++extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
++extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
++
++void __init wrt300nv2_pci_preinit(void)
++{
++ set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
++
++ ixp4xx_pci_preinit();
++}
++
++static int __init wrt300nv2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++ if (slot == 1)
++ return IRQ_IXP4XX_GPIO8;
++ else return -1;
++}
++
++struct hw_pci wrt300nv2_pci __initdata = {
++ .nr_controllers = 1,
++ .preinit = wrt300nv2_pci_preinit,
++ .swizzle = pci_std_swizzle,
++ .setup = ixp4xx_setup,
++ .scan = ixp4xx_scan_bus,
++ .map_irq = wrt300nv2_map_irq,
++};
++
++int __init wrt300nv2_pci_init(void)
++{
++ if (machine_is_wrt300nv2())
++ pci_common_init(&wrt300nv2_pci);
++ return 0;
++}
++
++subsys_initcall(wrt300nv2_pci_init);
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.24/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 2008-03-12 21:21:27.000000000 +1030
+@@ -0,0 +1,108 @@
++/*
++ * arch/arm/mach-ixp4xx/wrt300nv2-setup.c
++ *
++ * Board setup for the Linksys WRT300N v2
++ *
++ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ * Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data wrt300nv2_flash_data = {
++ .map_name = "cfi_probe",
++ .width = 2,
++};
++
++static struct resource wrt300nv2_flash_resource = {
++ .flags = IORESOURCE_MEM,
++};
++
++static struct platform_device wrt300nv2_flash = {
++ .name = "IXP4XX-Flash",
++ .id = 0,
++ .dev = {
++ .platform_data = &wrt300nv2_flash_data,
++ },
++ .num_resources = 1,
++ .resource = &wrt300nv2_flash_resource,
++};
++
++static struct resource wrt300nv2_uart_resource = {
++ .start = IXP4XX_UART2_BASE_PHYS,
++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct plat_serial8250_port wrt300nv2_uart_data[] = {
++ {
++ .mapbase = IXP4XX_UART2_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART2,
++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ { },
++};
++
++static struct platform_device wrt300nv2_uart = {
++ .name = "serial8250",
++ .id = PLAT8250_DEV_PLATFORM,
++ .dev = {
++ .platform_data = wrt300nv2_uart_data,
++ },
++ .num_resources = 1,
++ .resource = &wrt300nv2_uart_resource,
++};
++
++static struct platform_device *wrt300nv2_devices[] __initdata = {
++ &wrt300nv2_flash,
++ &wrt300nv2_uart
++};
++
++static void __init wrt300nv2_init(void)
++{
++ ixp4xx_sys_init();
++
++ wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++ wrt300nv2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++ platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
++}
++
++#ifdef CONFIG_MACH_WRT300NV2
++MACHINE_START(WRT300NV2, "Linksys WRT300N v2")
++ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++ .map_io = ixp4xx_map_io,
++ .init_irq = ixp4xx_init_irq,
++ .timer = &ixp4xx_timer,
++ .boot_params = 0x0100,
++ .init_machine = wrt300nv2_init,
++MACHINE_END
++#endif
+Index: linux-2.6.24/include/asm-arm/arch-ixp4xx/uncompress.h
+===================================================================
+--- linux-2.6.24.orig/include/asm-arm/arch-ixp4xx/uncompress.h 2008-03-12 21:21:26.000000000 +1030
++++ linux-2.6.24/include/asm-arm/arch-ixp4xx/uncompress.h 2008-03-12 21:21:27.000000000 +1030
+@@ -42,7 +42,7 @@
+ */
+ if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
+ machine_is_gateway7001() || machine_is_wg302v2() ||
+- machine_is_pronghorn_metro())
++ machine_is_pronghorn_metro() || machine_is_wrt300nv2())
+ uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ else
+ uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
--- /dev/null
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 2007-10-23 19:20:08.000000000 +0200
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/wrt300nv2-setup.c 2007-10-23 19:22:19.000000000 +0200
+@@ -76,9 +76,36 @@
+ .resource = &wrt300nv2_uart_resource,
+ };
+
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info wrt300nv2_plat_eth[] = {
++ {
++ .phy = -1,
++ .rxq = 3,
++ .txreadyq = 20,
++ }, {
++ .phy = 1,
++ .rxq = 4,
++ .txreadyq = 21,
++ }
++};
++
++static struct platform_device wrt300nv2_eth[] = {
++ {
++ .name = "ixp4xx_eth",
++ .id = IXP4XX_ETH_NPEB,
++ .dev.platform_data = wrt300nv2_plat_eth,
++ }, {
++ .name = "ixp4xx_eth",
++ .id = IXP4XX_ETH_NPEC,
++ .dev.platform_data = wrt300nv2_plat_eth + 1,
++ }
++};
++
+ static struct platform_device *wrt300nv2_devices[] __initdata = {
+ &wrt300nv2_flash,
+- &wrt300nv2_uart
++ &wrt300nv2_uart,
++ &wrt300nv2_eth[0],
++ &wrt300nv2_eth[1],
+ };
+
+ static void __init wrt300nv2_init(void)
--- /dev/null
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig 2007-10-23 19:20:08.000000000 +0200
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-10-23 19:26:46.000000000 +0200
+@@ -65,6 +65,14 @@
+ Engineering Pronghorn Metro Platform. For more
+ information on this platform, see <file:Documentation/arm/IXP4xx>.
+
++config MACH_SIDEWINDER
++ bool "Sidewinder"
++ select PCI
++ help
++ Say 'Y' here if you want your kernel to support the ADI
++ Engineering Sidewinder Platform. For more
++ information on this platform, see <file:Documentation/arm/IXP4xx>.
++
+ config MACH_COMPEX
+ bool "Compex WP18 / NP18A"
+ select PCI
+@@ -163,7 +171,7 @@
+ #
+ config CPU_IXP46X
+ bool
+- depends on MACH_IXDP465
++ depends on MACH_IXDP465 || MACH_SIDEWINDER
+ default y
+
+ config CPU_IXP43X
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Makefile linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.23/arch/arm/mach-ixp4xx/Makefile 2007-10-23 19:20:08.000000000 +0200
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile 2007-10-23 19:23:52.000000000 +0200
+@@ -19,6 +19,7 @@
+ obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
+ obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
+ obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
++obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
+
+ obj-y += common.o
+
+@@ -36,6 +37,7 @@
+ obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
+ obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
+ obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
++obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
+
+ obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/sidewinder-pci.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/sidewinder-pci.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/sidewinder-pci.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/sidewinder-pci.c 2007-10-23 19:23:52.000000000 +0200
+@@ -0,0 +1,71 @@
++/*
++ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
++ *
++ * PCI setup routines for ADI Engineering Sidewinder
++ *
++ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ * Copyright (C) 2002 Jungo Software Technologies.
++ * Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++
++#include <asm/mach/pci.h>
++
++extern void ixp4xx_pci_preinit(void);
++extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
++extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
++
++void __init sidewinder_pci_preinit(void)
++{
++ set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
++ set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
++ set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW);
++
++ ixp4xx_pci_preinit();
++}
++
++static int __init sidewinder_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++ if (slot == 1)
++ return IRQ_IXP4XX_GPIO11;
++ else if (slot == 2)
++ return IRQ_IXP4XX_GPIO10;
++ else if (slot == 3)
++ return IRQ_IXP4XX_GPIO9;
++ else return -1;
++}
++
++struct hw_pci sidewinder_pci __initdata = {
++ .nr_controllers = 1,
++ .preinit = sidewinder_pci_preinit,
++ .swizzle = pci_std_swizzle,
++ .setup = ixp4xx_setup,
++ .scan = ixp4xx_scan_bus,
++ .map_irq = sidewinder_map_irq,
++};
++
++int __init sidewinder_pci_init(void)
++{
++ if (machine_is_sidewinder())
++ pci_common_init(&sidewinder_pci);
++ return 0;
++}
++
++subsys_initcall(sidewinder_pci_init);
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/sidewinder-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/sidewinder-setup.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/sidewinder-setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/sidewinder-setup.c 2007-10-23 19:23:52.000000000 +0200
+@@ -0,0 +1,115 @@
++/*
++ * arch/arm/mach-ixp4xx/sidewinder-setup.c
++ *
++ * Board setup for the ADI Engineering Sidewinder
++ *
++ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ * Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/serial.h>
++#include <linux/serial_8250.h>
++
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data sidewinder_flash_data = {
++ .map_name = "cfi_probe",
++ .width = 2,
++};
++
++static struct resource sidewinder_flash_resource = {
++ .flags = IORESOURCE_MEM,
++};
++
++static struct platform_device sidewinder_flash = {
++ .name = "IXP4XX-Flash",
++ .id = 0,
++ .dev = {
++ .platform_data = &sidewinder_flash_data,
++ },
++ .num_resources = 1,
++ .resource = &sidewinder_flash_resource,
++};
++
++static struct resource sidewinder_uart_resources[] = {
++ {
++ .start = IXP4XX_UART1_BASE_PHYS,
++ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .start = IXP4XX_UART2_BASE_PHYS,
++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM,
++ }
++};
++
++static struct plat_serial8250_port sidewinder_uart_data[] = {
++ {
++ .mapbase = IXP4XX_UART1_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART1,
++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ {
++ .mapbase = IXP4XX_UART2_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART2,
++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ { },
++};
++
++static struct platform_device sidewinder_uart = {
++ .name = "serial8250",
++ .id = PLAT8250_DEV_PLATFORM,
++ .dev = {
++ .platform_data = sidewinder_uart_data,
++ },
++ .num_resources = 2,
++ .resource = &sidewinder_uart_resources,
++};
++
++static struct platform_device *sidewinder_devices[] __initdata = {
++ &sidewinder_flash,
++ &sidewinder_uart,
++};
++
++static void __init sidewinder_init(void)
++{
++ ixp4xx_sys_init();
++
++ sidewinder_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++ sidewinder_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_64M - 1;
++
++ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++ platform_add_devices(sidewinder_devices, ARRAY_SIZE(sidewinder_devices));
++}
++
++#ifdef CONFIG_MACH_SIDEWINDER
++MACHINE_START(SIDEWINDER, "ADI Engineering Sidewinder")
++ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++ .map_io = ixp4xx_map_io,
++ .init_irq = ixp4xx_init_irq,
++ .timer = &ixp4xx_timer,
++ .boot_params = 0x0100,
++ .init_machine = sidewinder_init,
++MACHINE_END
++#endif
--- /dev/null
+diff -Nur linux-2.6.23.1/arch/arm/mach-ixp4xx/ap1000-setup.c linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/ap1000-setup.c
+--- linux-2.6.23.1/arch/arm/mach-ixp4xx/ap1000-setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/ap1000-setup.c 2007-11-14 13:58:58.000000000 +0100
+@@ -0,0 +1,151 @@
++/*
++ * arch/arm/mach-ixp4xx/ap1000-setup.c
++ *
++ * Lanready AP-1000
++ *
++ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
++ *
++ * based on ixdp425-setup.c:
++ * Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <asm/hardware.h>
++#include <asm/mach-types.h>
++#include <asm/irq.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data ap1000_flash_data = {
++ .map_name = "cfi_probe",
++ .width = 2,
++};
++
++static struct resource ap1000_flash_resource = {
++ .flags = IORESOURCE_MEM,
++};
++
++static struct platform_device ap1000_flash = {
++ .name = "IXP4XX-Flash",
++ .id = 0,
++ .dev = {
++ .platform_data = &ap1000_flash_data,
++ },
++ .num_resources = 1,
++ .resource = &ap1000_flash_resource,
++};
++
++static struct resource ap1000_uart_resources[] = {
++ {
++ .start = IXP4XX_UART1_BASE_PHYS,
++ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM
++ },
++ {
++ .start = IXP4XX_UART2_BASE_PHYS,
++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM
++ }
++};
++
++static struct plat_serial8250_port ap1000_uart_data[] = {
++ {
++ .mapbase = IXP4XX_UART1_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART1,
++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ {
++ .mapbase = IXP4XX_UART2_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART2,
++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ { },
++};
++
++static struct platform_device ap1000_uart = {
++ .name = "serial8250",
++ .id = PLAT8250_DEV_PLATFORM,
++ .dev.platform_data = ap1000_uart_data,
++ .num_resources = 2,
++ .resource = ap1000_uart_resources
++};
++
++static struct platform_device *ap1000_devices[] __initdata = {
++ &ap1000_flash,
++ &ap1000_uart
++};
++
++static char ap1000_mem_fixup[] __initdata = "mem=64M ";
++
++static void __init ap1000_fixup(struct machine_desc *desc,
++ struct tag *tags, char **cmdline, struct meminfo *mi)
++
++{
++ struct tag *t = tags;
++ char *p = *cmdline;
++
++ /* Find the end of the tags table, taking note of any cmdline tag. */
++ for (; t->hdr.size; t = tag_next(t)) {
++ if (t->hdr.tag == ATAG_CMDLINE) {
++ p = t->u.cmdline.cmdline;
++ }
++ }
++
++ /* Overwrite the end of the table with a new cmdline tag. */
++ t->hdr.tag = ATAG_CMDLINE;
++ t->hdr.size = (sizeof (struct tag_header) +
++ strlen(ap1000_mem_fixup) + strlen(p) + 1 + 4) >> 2;
++ strlcpy(t->u.cmdline.cmdline, ap1000_mem_fixup, COMMAND_LINE_SIZE);
++ strlcpy(t->u.cmdline.cmdline + strlen(ap1000_mem_fixup), p,
++ COMMAND_LINE_SIZE - strlen(ap1000_mem_fixup));
++
++ /* Terminate the table. */
++ t = tag_next(t);
++ t->hdr.tag = ATAG_NONE;
++ t->hdr.size = 0;
++}
++
++static void __init ap1000_init(void)
++{
++ ixp4xx_sys_init();
++
++ ap1000_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++ ap1000_flash_resource.end =
++ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
++
++ platform_add_devices(ap1000_devices, ARRAY_SIZE(ap1000_devices));
++}
++
++#ifdef CONFIG_MACH_AP1000
++MACHINE_START(AP1000, "Lanready AP-1000")
++ /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++ .fixup = ap1000_fixup,
++ .map_io = ixp4xx_map_io,
++ .init_irq = ixp4xx_init_irq,
++ .timer = &ixp4xx_timer,
++ .boot_params = 0x0100,
++ .init_machine = ap1000_init,
++MACHINE_END
++#endif
+diff -Nur linux-2.6.23.1/arch/arm/mach-ixp4xx/ixdp425-pci.c linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c
+--- linux-2.6.23.1/arch/arm/mach-ixp4xx/ixdp425-pci.c 2007-11-14 13:15:50.000000000 +0100
++++ linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c 2007-11-14 13:27:16.000000000 +0100
+@@ -66,7 +66,8 @@
+ int __init ixdp425_pci_init(void)
+ {
+ if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
+- machine_is_ixdp465() || machine_is_kixrp435() || machine_is_compex())
++ machine_is_ixdp465() || machine_is_kixrp435() ||
++ machine_is_compex() || machine_is_ap1000())
+ pci_common_init(&ixdp425_pci);
+ return 0;
+ }
+diff -Nur linux-2.6.23.1/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.23.1/arch/arm/mach-ixp4xx/Kconfig 2007-11-14 13:15:50.000000000 +0100
++++ linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-11-14 13:25:07.000000000 +0100
+@@ -89,6 +89,14 @@
+ WRT300N v2 router. For more information on this
+ platform, see http://openwrt.org
+
++config MACH_AP1000
++ bool "Lanready AP-1000"
++ select PCI
++ help
++ Say 'Y' here if you want your kernel to support Lanready's
++ AP1000 board. For more information on this
++ platform, see http://openwrt.org
++
+ config ARCH_IXDP425
+ bool "IXDP425"
+ help
+diff -Nur linux-2.6.23.1/arch/arm/mach-ixp4xx/Makefile linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.23.1/arch/arm/mach-ixp4xx/Makefile 2007-11-14 13:15:50.000000000 +0100
++++ linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/Makefile 2007-11-14 13:31:29.000000000 +0100
+@@ -20,6 +20,7 @@
+ obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
+ obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
+ obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
++obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
+
+ obj-y += common.o
+
+@@ -38,5 +39,6 @@
+ obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
+ obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
+ obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
++obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
+
+ obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
--- /dev/null
+diff -Nur linux-2.6.23.1/arch/arm/mach-ixp4xx/ap1000-setup.c linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/ap1000-setup.c
+--- linux-2.6.23.1/arch/arm/mach-ixp4xx/ap1000-setup.c 2007-11-14 14:11:10.000000000 +0100
++++ linux-2.6.23.1-owrt/arch/arm/mach-ixp4xx/ap1000-setup.c 2007-11-14 14:09:30.000000000 +0100
+@@ -90,9 +90,36 @@
+ .resource = ap1000_uart_resources
+ };
+
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info ap1000_plat_eth[] = {
++ {
++ .phy = 4,
++ .rxq = 3,
++ .txreadyq = 20,
++ }, {
++ .phy = 5,
++ .rxq = 4,
++ .txreadyq = 21,
++ }
++};
++
++static struct platform_device ap1000_eth[] = {
++ {
++ .name = "ixp4xx_eth",
++ .id = IXP4XX_ETH_NPEB,
++ .dev.platform_data = ap1000_plat_eth,
++ }, {
++ .name = "ixp4xx_eth",
++ .id = IXP4XX_ETH_NPEC,
++ .dev.platform_data = ap1000_plat_eth + 1,
++ }
++};
++
+ static struct platform_device *ap1000_devices[] __initdata = {
+ &ap1000_flash,
+- &ap1000_uart
++ &ap1000_uart,
++ &ap1000_eth[0],
++ &ap1000_eth[1],
+ };
+
+ static char ap1000_mem_fixup[] __initdata = "mem=64M ";
--- /dev/null
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Kconfig 2008-03-12 21:21:28.000000000 +1030
++++ linux-2.6.24/arch/arm/mach-ixp4xx/Kconfig 2008-03-12 21:21:29.000000000 +1030
+@@ -49,6 +49,14 @@
+ 7001 Access Point. For more information on this platform,
+ see http://openwrt.org
+
++config MACH_WG302V1
++ bool "Netgear WG302 v1 / WAG302 v1"
++ select PCI
++ help
++ Say 'Y' here if you want your kernel to support Netgear's
++ WG302 v1 or WAG302 v1 Access Points. For more information
++ on this platform, see http://openwrt.org
++
+ config MACH_WG302V2
+ bool "Netgear WG302 v2 / WAG302 v2"
+ select PCI
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/Makefile
+===================================================================
+--- linux-2.6.24.orig/arch/arm/mach-ixp4xx/Makefile 2008-03-12 21:21:28.000000000 +1030
++++ linux-2.6.24/arch/arm/mach-ixp4xx/Makefile 2008-03-12 21:21:29.000000000 +1030
+@@ -14,6 +14,7 @@
+ obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
+ obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
+ obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
++obj-pci-$(CONFIG_MACH_WG302V1) += wg302v1-pci.o
+ obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
+ obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
+ obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
+@@ -33,6 +34,7 @@
+ obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o
+ obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o
+ obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
++obj-$(CONFIG_MACH_WG302V1) += wg302v1-setup.o
+ obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
+ obj-$(CONFIG_MACH_FSG) += fsg-setup.o
+ obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/wg302v1-pci.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.24/arch/arm/mach-ixp4xx/wg302v1-pci.c 2008-03-12 21:21:29.000000000 +1030
+@@ -0,0 +1,63 @@
++/*
++ * arch/arch/mach-ixp4xx/wg302v1-pci.c
++ *
++ * PCI setup routines for the Netgear WG302 v1 and WAG302 v1
++ *
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ * Copyright (C) 2002 Jungo Software Technologies.
++ * Copyright (C) 2003 MontaVista Software, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <asm/hardware.h>
++
++#include <asm/mach/pci.h>
++
++void __init wg302v1_pci_preinit(void)
++{
++ set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
++ set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
++
++ ixp4xx_pci_preinit();
++}
++
++static int __init wg302v1_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++ if (slot == 1)
++ return IRQ_IXP4XX_GPIO8;
++ else if (slot == 2)
++ return IRQ_IXP4XX_GPIO10;
++ else return -1;
++}
++
++struct hw_pci wg302v1_pci __initdata = {
++ .nr_controllers = 1,
++ .preinit = wg302v1_pci_preinit,
++ .swizzle = pci_std_swizzle,
++ .setup = ixp4xx_setup,
++ .scan = ixp4xx_scan_bus,
++ .map_irq = wg302v1_map_irq,
++};
++
++int __init wg302v1_pci_init(void)
++{
++ if (machine_is_wg302v1())
++ pci_common_init(&wg302v1_pci);
++ return 0;
++}
++
++subsys_initcall(wg302v1_pci_init);
+Index: linux-2.6.24/arch/arm/mach-ixp4xx/wg302v1-setup.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.24/arch/arm/mach-ixp4xx/wg302v1-setup.c 2008-03-12 21:21:29.000000000 +1030
+@@ -0,0 +1,109 @@
++/*
++ * arch/arm/mach-ixp4xx/wg302v1-setup.c
++ *
++ * Board setup for the Netgear WG302 v1 and WAG302 v1
++ *
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ * Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <kaloz@openwrt.org>
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data wg302v1_flash_data = {
++ .map_name = "cfi_probe",
++ .width = 2,
++};
++
++static struct resource wg302v1_flash_resource = {
++ .flags = IORESOURCE_MEM,
++};
++
++static struct platform_device wg302v1_flash = {
++ .name = "IXP4XX-Flash",
++ .id = 0,
++ .dev = {
++ .platform_data = &wg302v1_flash_data,
++ },
++ .num_resources = 1,
++ .resource = &wg302v1_flash_resource,
++};
++
++static struct resource wg302v1_uart_resource = {
++ .start = IXP4XX_UART1_BASE_PHYS,
++ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct plat_serial8250_port wg302v1_uart_data[] = {
++ {
++ .mapbase = IXP4XX_UART1_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART1,
++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ { },
++};
++
++static struct platform_device wg302v1_uart = {
++ .name = "serial8250",
++ .id = PLAT8250_DEV_PLATFORM,
++ .dev = {
++ .platform_data = wg302v1_uart_data,
++ },
++ .num_resources = 1,
++ .resource = &wg302v1_uart_resource,
++};
++
++static struct platform_device *wg302v1_devices[] __initdata = {
++ &wg302v1_flash,
++ &wg302v1_uart,
++};
++
++static void __init wg302v1_init(void)
++{
++ ixp4xx_sys_init();
++
++ wg302v1_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++ wg302v1_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++ platform_add_devices(wg302v1_devices, ARRAY_SIZE(wg302v1_devices));
++}
++
++#ifdef CONFIG_MACH_WG302V1
++MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1")
++ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++ .map_io = ixp4xx_map_io,
++ .init_irq = ixp4xx_init_irq,
++ .timer = &ixp4xx_timer,
++ .boot_params = 0x0100,
++ .init_machine = wg302v1_init,
++MACHINE_END
++#endif
--- /dev/null
+diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-setup.c linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-setup.c
+--- linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-setup.c 2008-01-14 23:06:42.000000000 +0100
++++ linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-setup.c 2008-01-14 23:03:16.000000000 +0100
+@@ -77,9 +77,27 @@
+ .resource = &wg302v1_uart_resource,
+ };
+
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info wg302_plat_eth[] = {
++ {
++ .phy = 30,
++ .rxq = 3,
++ .txreadyq = 20,
++ }
++};
++
++static struct platform_device wg302_eth[] = {
++ {
++ .name = "ixp4xx_eth",
++ .id = IXP4XX_ETH_NPEB,
++ .dev.platform_data = wg302_plat_eth,
++ }
++};
++
+ static struct platform_device *wg302v1_devices[] __initdata = {
+ &wg302v1_flash,
+ &wg302v1_uart,
++ &wg302_eth[0],
+ };
+
+ static void __init wg302v1_init(void)
--- /dev/null
+diff -Nur linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-setup.c linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-setup.c
+--- linux-2.6.23.12/arch/arm/mach-ixp4xx/wg302v1-setup.c 2008-01-14 23:12:03.000000000 +0100
++++ linux-2.6.23.12-owrt/arch/arm/mach-ixp4xx/wg302v1-setup.c 2008-01-14 23:11:34.000000000 +0100
+@@ -100,6 +100,36 @@
+ &wg302_eth[0],
+ };
+
++static char wg302v1_mem_fixup[] __initdata = "mem=32M ";
++
++static void __init wg302v1_fixup(struct machine_desc *desc,
++ struct tag *tags, char **cmdline, struct meminfo *mi)
++
++{
++ struct tag *t = tags;
++ char *p = *cmdline;
++
++ /* Find the end of the tags table, taking note of any cmdline tag. */
++ for (; t->hdr.size; t = tag_next(t)) {
++ if (t->hdr.tag == ATAG_CMDLINE) {
++ p = t->u.cmdline.cmdline;
++ }
++ }
++
++ /* Overwrite the end of the table with a new cmdline tag. */
++ t->hdr.tag = ATAG_CMDLINE;
++ t->hdr.size = (sizeof (struct tag_header) +
++ strlen(wg302v1_mem_fixup) + strlen(p) + 1 + 4) >> 2;
++ strlcpy(t->u.cmdline.cmdline, wg302v1_mem_fixup, COMMAND_LINE_SIZE);
++ strlcpy(t->u.cmdline.cmdline + strlen(wg302v1_mem_fixup), p,
++ COMMAND_LINE_SIZE - strlen(wg302v1_mem_fixup));
++
++ /* Terminate the table. */
++ t = tag_next(t);
++ t->hdr.tag = ATAG_NONE;
++ t->hdr.size = 0;
++}
++
+ static void __init wg302v1_init(void)
+ {
+ ixp4xx_sys_init();
+@@ -118,6 +148,7 @@
+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++ .fixup = wg302v1_fixup,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
--- /dev/null
+--- linux-2.6.24.2/arch/arm/mach-ixp4xx/coyote-setup.c 2008-02-11 06:51:11.000000000 +0100
++++ linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/coyote-setup.c 2008-04-07 12:39:48.000000000 +0200
+@@ -73,9 +73,37 @@
+ .resource = &coyote_uart_resource,
+ };
+
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info ixdpg425_plat_eth[] = {
++ {
++ .phy = 5,
++ .rxq = 3,
++ .txreadyq = 20,
++ }, {
++ .phy = 4,
++ .rxq = 4,
++ .txreadyq = 21,
++ }
++};
++
++static struct platform_device ixdpg425_eth[] = {
++ {
++ .name = "ixp4xx_eth",
++ .id = IXP4XX_ETH_NPEB,
++ .dev.platform_data = ixdpg425_plat_eth,
++ }, {
++ .name = "ixp4xx_eth",
++ .id = IXP4XX_ETH_NPEC,
++ .dev.platform_data = ixdpg425_plat_eth + 1,
++ }
++};
++
++
+ static struct platform_device *coyote_devices[] __initdata = {
+ &coyote_flash,
+- &coyote_uart
++ &coyote_uart,
++ &ixdpg425_eth[0],
++ &ixdpg425_eth[1],
+ };
+
+ static void __init coyote_init(void)
--- /dev/null
+diff -Nur linux-2.6.24.2/arch/arm/mach-ixp4xx/Kconfig linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.24.2/arch/arm/mach-ixp4xx/Kconfig 2008-04-09 01:34:46.000000000 +0200
++++ linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/Kconfig 2008-04-09 00:06:48.000000000 +0200
+@@ -150,6 +150,14 @@
+ PrPCM1100 Processor Mezanine Module. For more information on
+ this platform, see <file:Documentation/arm/IXP4xx>.
+
++config MACH_TW5334
++ bool "Titan Wireless TW-533-4"
++ select PCI
++ help
++ Say 'Y' here if you want your kernel to support the Titan
++ Wireless TW533-4. For more information on this platform,
++ see http://openwrt.org
++
+ config MACH_NAS100D
+ bool
+ prompt "NAS100D"
+diff -Nur linux-2.6.24.2/arch/arm/mach-ixp4xx/Makefile linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.24.2/arch/arm/mach-ixp4xx/Makefile 2008-04-09 01:34:46.000000000 +0200
++++ linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/Makefile 2008-04-09 00:07:45.000000000 +0200
+@@ -22,6 +22,7 @@
+ obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
+ obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
+ obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
++obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
+
+ obj-y += common.o
+
+@@ -42,6 +43,7 @@
+ obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
+ obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
+ obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
++obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
+
+ obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
+ obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
+diff -Nur linux-2.6.24.2/arch/arm/mach-ixp4xx/tw5334-setup.c linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/tw5334-setup.c
+--- linux-2.6.24.2/arch/arm/mach-ixp4xx/tw5334-setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/tw5334-setup.c 2008-04-09 01:58:52.000000000 +0200
+@@ -0,0 +1,162 @@
++/*
++ * arch/arm/mach-ixp4xx/tw5334-setup.c
++ *
++ * Board setup for the Titan Wireless TW-533-4
++ *
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-setup.c:
++ * Copyright (C) 2003-2005 MontaVista Software, Inc.
++ *
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
++ */
++
++#include <linux/if_ether.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/serial.h>
++#include <linux/tty.h>
++#include <linux/serial_8250.h>
++#include <linux/slab.h>
++
++#include <asm/types.h>
++#include <asm/setup.h>
++#include <asm/memory.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++
++static struct flash_platform_data tw5334_flash_data = {
++ .map_name = "cfi_probe",
++ .width = 2,
++};
++
++static struct resource tw5334_flash_resource = {
++ .flags = IORESOURCE_MEM,
++};
++
++static struct platform_device tw5334_flash = {
++ .name = "IXP4XX-Flash",
++ .id = 0,
++ .dev = {
++ .platform_data = &tw5334_flash_data,
++ },
++ .num_resources = 1,
++ .resource = &tw5334_flash_resource,
++};
++
++static struct resource tw5334_uart_resource = {
++ .start = IXP4XX_UART2_BASE_PHYS,
++ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct plat_serial8250_port tw5334_uart_data[] = {
++ {
++ .mapbase = IXP4XX_UART2_BASE_PHYS,
++ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
++ .irq = IRQ_IXP4XX_UART2,
++ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = IXP4XX_UART_XTAL,
++ },
++ { },
++};
++
++static struct platform_device tw5334_uart = {
++ .name = "serial8250",
++ .id = PLAT8250_DEV_PLATFORM,
++ .dev = {
++ .platform_data = tw5334_uart_data,
++ },
++ .num_resources = 1,
++ .resource = &tw5334_uart_resource,
++};
++
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info tw5334_plat_eth[] = {
++ {
++ .phy = 0,
++ .rxq = 3,
++ .txreadyq = 20,
++ }, {
++ .phy = 1,
++ .rxq = 4,
++ .txreadyq = 21,
++ }
++};
++
++static struct platform_device tw5334_eth[] = {
++ {
++ .name = "ixp4xx_eth",
++ .id = IXP4XX_ETH_NPEB,
++ .dev.platform_data = tw5334_plat_eth,
++ }, {
++ .name = "ixp4xx_eth",
++ .id = IXP4XX_ETH_NPEC,
++ .dev.platform_data = tw5334_plat_eth + 1,
++ }
++};
++
++static struct platform_device *tw5334_devices[] __initdata = {
++ &tw5334_flash,
++ &tw5334_uart,
++ &tw5334_eth[0],
++ &tw5334_eth[1],
++};
++
++static void __init tw5334_init(void)
++{
++ DECLARE_MAC_BUF(mac_buf);
++ uint8_t __iomem *f;
++ int i;
++
++ ixp4xx_sys_init();
++
++ tw5334_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
++ tw5334_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
++
++ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
++ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
++
++ platform_add_devices(tw5334_devices, ARRAY_SIZE(tw5334_devices));
++
++ /*
++ * Map in a portion of the flash and read the MAC addresses.
++ * Since it is stored in BE in the flash itself, we need to
++ * byteswap it if we're in LE mode.
++ */
++ f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000);
++ if (f) {
++ for (i = 0; i < 6; i++)
++#ifdef __ARMEB__
++ tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + i);
++ tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + i);
++#else
++ tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + (i^3));
++ tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + (i^3));
++#endif
++ iounmap(f);
++ }
++ printk(KERN_INFO "TW-533-4: Using MAC address %s for port 0\n",
++ print_mac(mac_buf, tw5334_plat_eth[0].hwaddr));
++ printk(KERN_INFO "TW-533-4: Using MAC address %s for port 1\n",
++ print_mac(mac_buf, tw5334_plat_eth[1].hwaddr));
++}
++
++#ifdef CONFIG_MACH_TW5334
++MACHINE_START(TW5334, "Titan Wireless TW-533-4")
++ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++ .map_io = ixp4xx_map_io,
++ .init_irq = ixp4xx_init_irq,
++ .timer = &ixp4xx_timer,
++ .boot_params = 0x0100,
++ .init_machine = tw5334_init,
++MACHINE_END
++#endif
+diff -Nur linux-2.6.24.2/arch/arm/mach-ixp4xx/tw5334-pci.c linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/tw5334-pci.c
+--- linux-2.6.24.2/arch/arm/mach-ixp4xx/tw5334-pci.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/tw5334-pci.c 2008-04-09 00:35:32.000000000 +0200
+@@ -0,0 +1,69 @@
++/*
++ * arch/arch/mach-ixp4xx/tw5334-pci.c
++ *
++ * PCI setup routines for the Titan Wireless TW-533-4
++ *
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ * Copyright (C) 2002 Jungo Software Technologies.
++ * Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++
++#include <asm/mach-types.h>
++#include <asm/hardware.h>
++
++#include <asm/mach/pci.h>
++
++void __init tw5334_pci_preinit(void)
++{
++ set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
++ set_irq_type(IRQ_IXP4XX_GPIO2, IRQT_LOW);
++ set_irq_type(IRQ_IXP4XX_GPIO1, IRQT_LOW);
++ set_irq_type(IRQ_IXP4XX_GPIO0, IRQT_LOW);
++
++ ixp4xx_pci_preinit();
++}
++
++static int __init tw5334_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++ if (slot == 12)
++ return IRQ_IXP4XX_GPIO6;
++ else if (slot == 13)
++ return IRQ_IXP4XX_GPIO2;
++ else if (slot == 14)
++ return IRQ_IXP4XX_GPIO1;
++ else if (slot == 15)
++ return IRQ_IXP4XX_GPIO0;
++ else return -1;
++}
++
++struct hw_pci tw5334_pci __initdata = {
++ .nr_controllers = 1,
++ .preinit = tw5334_pci_preinit,
++ .swizzle = pci_std_swizzle,
++ .setup = ixp4xx_setup,
++ .scan = ixp4xx_scan_bus,
++ .map_irq = tw5334_map_irq,
++};
++
++int __init tw5334_pci_init(void)
++{
++ if (machine_is_tw5334())
++ pci_common_init(&tw5334_pci);
++ return 0;
++}
++
++subsys_initcall(tw5334_pci_init);
+--- linux-2.6.24.2/include/asm-arm/arch-ixp4xx/uncompress.h 2008-04-07 08:59:19.000000000 +0200
++++ linux-2.6.24.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2008-04-09 13:22:42.000000000 +0200
+@@ -42,7 +42,8 @@
+ */
+ if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
+ machine_is_gateway7001() || machine_is_wg302v2() ||
+- machine_is_pronghorn_metro() || machine_is_wrt300nv2())
++ machine_is_pronghorn_metro() || machine_is_wrt300nv2() ||
++ machine_is_tw5334())
+ uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+ else
+ uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
--- /dev/null
+diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
+index f9cc2b6..9274d3f 100644
+--- a/drivers/net/arm/Kconfig
++++ b/drivers/net/arm/Kconfig
+@@ -47,3 +47,13 @@ config EP93XX_ETH
+ help
+ This is a driver for the ethernet hardware included in EP93xx CPUs.
+ Say Y if you are building a kernel for EP93xx based devices.
++
++config IXP4XX_ETH
++ tristate "IXP4xx Ethernet support"
++ depends on NET_ETHERNET && ARM && ARCH_IXP4XX
++ select IXP4XX_NPE
++ select IXP4XX_QMGR
++ select MII
++ help
++ Say Y here if you want to use built-in Ethernet ports
++ on IXP4xx processor.
+diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile
+index a4c8682..7c812ac 100644
+--- a/drivers/net/arm/Makefile
++++ b/drivers/net/arm/Makefile
+@@ -9,3 +9,4 @@ obj-$(CONFIG_ARM_ETHER3) += ether3.o
+ obj-$(CONFIG_ARM_ETHER1) += ether1.o
+ obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
+ obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
++obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o
+diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
+new file mode 100644
+index 0000000..d8bbbc7
+--- /dev/null
++++ b/drivers/net/arm/ixp4xx_eth.c
+@@ -0,0 +1,1264 @@
++/*
++ * Intel IXP4xx Ethernet driver for Linux
++ *
++ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License
++ * as published by the Free Software Foundation.
++ *
++ * Ethernet port config (0x00 is not present on IXP42X):
++ *
++ * logical port 0x00 0x10 0x20
++ * NPE 0 (NPE-A) 1 (NPE-B) 2 (NPE-C)
++ * physical PortId 2 0 1
++ * TX queue 23 24 25
++ * RX-free queue 26 27 28
++ * TX-done queue is always 31, per-port RX and TX-ready queues are configurable
++ *
++ *
++ * Queue entries:
++ * bits 0 -> 1 - NPE ID (RX and TX-done)
++ * bits 0 -> 2 - priority (TX, per 802.1D)
++ * bits 3 -> 4 - port ID (user-set?)
++ * bits 5 -> 31 - physical descriptor address
++ */
++
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/dmapool.h>
++#include <linux/etherdevice.h>
++#include <linux/io.h>
++#include <linux/kernel.h>
++#include <linux/mii.h>
++#include <linux/platform_device.h>
++#include <asm/arch/npe.h>
++#include <asm/arch/qmgr.h>
++
++#define DEBUG_QUEUES 0
++#define DEBUG_DESC 0
++#define DEBUG_RX 0
++#define DEBUG_TX 0
++#define DEBUG_PKT_BYTES 0
++#define DEBUG_MDIO 0
++#define DEBUG_CLOSE 0
++
++#define DRV_NAME "ixp4xx_eth"
++
++#define MAX_NPES 3
++
++#define RX_DESCS 64 /* also length of all RX queues */
++#define TX_DESCS 16 /* also length of all TX queues */
++#define TXDONE_QUEUE_LEN 64 /* dwords */
++
++#define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS))
++#define REGS_SIZE 0x1000
++#define MAX_MRU 1536 /* 0x600 */
++#define RX_BUFF_SIZE ALIGN((NET_IP_ALIGN) + MAX_MRU, 4)
++
++#define NAPI_WEIGHT 16
++#define MDIO_INTERVAL (3 * HZ)
++#define MAX_MDIO_RETRIES 100 /* microseconds, typically 30 cycles */
++#define MAX_MII_RESET_RETRIES 100 /* mdio_read() cycles, typically 4 */
++#define MAX_CLOSE_WAIT 1000 /* microseconds, typically 2-3 cycles */
++
++#define NPE_ID(port_id) ((port_id) >> 4)
++#define PHYSICAL_ID(port_id) ((NPE_ID(port_id) + 2) % 3)
++#define TX_QUEUE(port_id) (NPE_ID(port_id) + 23)
++#define RXFREE_QUEUE(port_id) (NPE_ID(port_id) + 26)
++#define TXDONE_QUEUE 31
++
++/* TX Control Registers */
++#define TX_CNTRL0_TX_EN 0x01
++#define TX_CNTRL0_HALFDUPLEX 0x02
++#define TX_CNTRL0_RETRY 0x04
++#define TX_CNTRL0_PAD_EN 0x08
++#define TX_CNTRL0_APPEND_FCS 0x10
++#define TX_CNTRL0_2DEFER 0x20
++#define TX_CNTRL0_RMII 0x40 /* reduced MII */
++#define TX_CNTRL1_RETRIES 0x0F /* 4 bits */
++
++/* RX Control Registers */
++#define RX_CNTRL0_RX_EN 0x01
++#define RX_CNTRL0_PADSTRIP_EN 0x02
++#define RX_CNTRL0_SEND_FCS 0x04
++#define RX_CNTRL0_PAUSE_EN 0x08
++#define RX_CNTRL0_LOOP_EN 0x10
++#define RX_CNTRL0_ADDR_FLTR_EN 0x20
++#define RX_CNTRL0_RX_RUNT_EN 0x40
++#define RX_CNTRL0_BCAST_DIS 0x80
++#define RX_CNTRL1_DEFER_EN 0x01
++
++/* Core Control Register */
++#define CORE_RESET 0x01
++#define CORE_RX_FIFO_FLUSH 0x02
++#define CORE_TX_FIFO_FLUSH 0x04
++#define CORE_SEND_JAM 0x08
++#define CORE_MDC_EN 0x10 /* MDIO using NPE-B ETH-0 only */
++
++#define DEFAULT_TX_CNTRL0 (TX_CNTRL0_TX_EN | TX_CNTRL0_RETRY | \
++ TX_CNTRL0_PAD_EN | TX_CNTRL0_APPEND_FCS | \
++ TX_CNTRL0_2DEFER)
++#define DEFAULT_RX_CNTRL0 RX_CNTRL0_RX_EN
++#define DEFAULT_CORE_CNTRL CORE_MDC_EN
++
++
++/* NPE message codes */
++#define NPE_GETSTATUS 0x00
++#define NPE_EDB_SETPORTADDRESS 0x01
++#define NPE_EDB_GETMACADDRESSDATABASE 0x02
++#define NPE_EDB_SETMACADDRESSSDATABASE 0x03
++#define NPE_GETSTATS 0x04
++#define NPE_RESETSTATS 0x05
++#define NPE_SETMAXFRAMELENGTHS 0x06
++#define NPE_VLAN_SETRXTAGMODE 0x07
++#define NPE_VLAN_SETDEFAULTRXVID 0x08
++#define NPE_VLAN_SETPORTVLANTABLEENTRY 0x09
++#define NPE_VLAN_SETPORTVLANTABLERANGE 0x0A
++#define NPE_VLAN_SETRXQOSENTRY 0x0B
++#define NPE_VLAN_SETPORTIDEXTRACTIONMODE 0x0C
++#define NPE_STP_SETBLOCKINGSTATE 0x0D
++#define NPE_FW_SETFIREWALLMODE 0x0E
++#define NPE_PC_SETFRAMECONTROLDURATIONID 0x0F
++#define NPE_PC_SETAPMACTABLE 0x11
++#define NPE_SETLOOPBACK_MODE 0x12
++#define NPE_PC_SETBSSIDTABLE 0x13
++#define NPE_ADDRESS_FILTER_CONFIG 0x14
++#define NPE_APPENDFCSCONFIG 0x15
++#define NPE_NOTIFY_MAC_RECOVERY_DONE 0x16
++#define NPE_MAC_RECOVERY_START 0x17
++
++
++#ifdef __ARMEB__
++typedef struct sk_buff buffer_t;
++#define free_buffer dev_kfree_skb
++#define free_buffer_irq dev_kfree_skb_irq
++#else
++typedef void buffer_t;
++#define free_buffer kfree
++#define free_buffer_irq kfree
++#endif
++
++struct eth_regs {
++ u32 tx_control[2], __res1[2]; /* 000 */
++ u32 rx_control[2], __res2[2]; /* 010 */
++ u32 random_seed, __res3[3]; /* 020 */
++ u32 partial_empty_threshold, __res4; /* 030 */
++ u32 partial_full_threshold, __res5; /* 038 */
++ u32 tx_start_bytes, __res6[3]; /* 040 */
++ u32 tx_deferral, rx_deferral,__res7[2]; /* 050 */
++ u32 tx_2part_deferral[2], __res8[2]; /* 060 */
++ u32 slot_time, __res9[3]; /* 070 */
++ u32 mdio_command[4]; /* 080 */
++ u32 mdio_status[4]; /* 090 */
++ u32 mcast_mask[6], __res10[2]; /* 0A0 */
++ u32 mcast_addr[6], __res11[2]; /* 0C0 */
++ u32 int_clock_threshold, __res12[3]; /* 0E0 */
++ u32 hw_addr[6], __res13[61]; /* 0F0 */
++ u32 core_control; /* 1FC */
++};
++
++struct port {
++ struct resource *mem_res;
++ struct eth_regs __iomem *regs;
++ struct npe *npe;
++ struct net_device *netdev;
++ struct napi_struct napi;
++ struct net_device_stats stat;
++ struct mii_if_info mii;
++ struct delayed_work mdio_thread;
++ struct eth_plat_info *plat;
++ buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS];
++ struct desc *desc_tab; /* coherent */
++ u32 desc_tab_phys;
++ int id; /* logical port ID */
++ u16 mii_bmcr;
++};
++
++/* NPE message structure */
++struct msg {
++#ifdef __ARMEB__
++ u8 cmd, eth_id, byte2, byte3;
++ u8 byte4, byte5, byte6, byte7;
++#else
++ u8 byte3, byte2, eth_id, cmd;
++ u8 byte7, byte6, byte5, byte4;
++#endif
++};
++
++/* Ethernet packet descriptor */
++struct desc {
++ u32 next; /* pointer to next buffer, unused */
++
++#ifdef __ARMEB__
++ u16 buf_len; /* buffer length */
++ u16 pkt_len; /* packet length */
++ u32 data; /* pointer to data buffer in RAM */
++ u8 dest_id;
++ u8 src_id;
++ u16 flags;
++ u8 qos;
++ u8 padlen;
++ u16 vlan_tci;
++#else
++ u16 pkt_len; /* packet length */
++ u16 buf_len; /* buffer length */
++ u32 data; /* pointer to data buffer in RAM */
++ u16 flags;
++ u8 src_id;
++ u8 dest_id;
++ u16 vlan_tci;
++ u8 padlen;
++ u8 qos;
++#endif
++
++#ifdef __ARMEB__
++ u8 dst_mac_0, dst_mac_1, dst_mac_2, dst_mac_3;
++ u8 dst_mac_4, dst_mac_5, src_mac_0, src_mac_1;
++ u8 src_mac_2, src_mac_3, src_mac_4, src_mac_5;
++#else
++ u8 dst_mac_3, dst_mac_2, dst_mac_1, dst_mac_0;
++ u8 src_mac_1, src_mac_0, dst_mac_5, dst_mac_4;
++ u8 src_mac_5, src_mac_4, src_mac_3, src_mac_2;
++#endif
++};
++
++
++#define rx_desc_phys(port, n) ((port)->desc_tab_phys + \
++ (n) * sizeof(struct desc))
++#define rx_desc_ptr(port, n) (&(port)->desc_tab[n])
++
++#define tx_desc_phys(port, n) ((port)->desc_tab_phys + \
++ ((n) + RX_DESCS) * sizeof(struct desc))
++#define tx_desc_ptr(port, n) (&(port)->desc_tab[(n) + RX_DESCS])
++
++#ifndef __ARMEB__
++static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt)
++{
++ int i;
++ for (i = 0; i < cnt; i++)
++ dest[i] = swab32(src[i]);
++}
++#endif
++
++static spinlock_t mdio_lock;
++static struct eth_regs __iomem *mdio_regs; /* mdio command and status only */
++static int ports_open;
++static struct port *npe_port_tab[MAX_NPES];
++static struct dma_pool *dma_pool;
++
++
++static u16 mdio_cmd(struct net_device *dev, int phy_id, int location,
++ int write, u16 cmd)
++{
++ int cycles = 0;
++
++ if (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80) {
++ printk(KERN_ERR "%s: MII not ready to transmit\n", dev->name);
++ return 0;
++ }
++
++ if (write) {
++ __raw_writel(cmd & 0xFF, &mdio_regs->mdio_command[0]);
++ __raw_writel(cmd >> 8, &mdio_regs->mdio_command[1]);
++ }
++ __raw_writel(((phy_id << 5) | location) & 0xFF,
++ &mdio_regs->mdio_command[2]);
++ __raw_writel((phy_id >> 3) | (write << 2) | 0x80 /* GO */,
++ &mdio_regs->mdio_command[3]);
++
++ while ((cycles < MAX_MDIO_RETRIES) &&
++ (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80)) {
++ udelay(1);
++ cycles++;
++ }
++
++ if (cycles == MAX_MDIO_RETRIES) {
++ printk(KERN_ERR "%s: MII write failed\n", dev->name);
++ return 0;
++ }
++
++#if DEBUG_MDIO
++ printk(KERN_DEBUG "%s: mdio_cmd() took %i cycles\n", dev->name,
++ cycles);
++#endif
++
++ if (write)
++ return 0;
++
++ if (__raw_readl(&mdio_regs->mdio_status[3]) & 0x80) {
++ printk(KERN_ERR "%s: MII read failed\n", dev->name);
++ return 0;
++ }
++
++ return (__raw_readl(&mdio_regs->mdio_status[0]) & 0xFF) |
++ (__raw_readl(&mdio_regs->mdio_status[1]) << 8);
++}
++
++static int mdio_read(struct net_device *dev, int phy_id, int location)
++{
++ unsigned long flags;
++ u16 val;
++
++ spin_lock_irqsave(&mdio_lock, flags);
++ val = mdio_cmd(dev, phy_id, location, 0, 0);
++ spin_unlock_irqrestore(&mdio_lock, flags);
++ return val;
++}
++
++static void mdio_write(struct net_device *dev, int phy_id, int location,
++ int val)
++{
++ unsigned long flags;
++
++ spin_lock_irqsave(&mdio_lock, flags);
++ mdio_cmd(dev, phy_id, location, 1, val);
++ spin_unlock_irqrestore(&mdio_lock, flags);
++}
++
++static void phy_reset(struct net_device *dev, int phy_id)
++{
++ struct port *port = netdev_priv(dev);
++ int cycles = 0;
++
++ mdio_write(dev, phy_id, MII_BMCR, port->mii_bmcr | BMCR_RESET);
++
++ while (cycles < MAX_MII_RESET_RETRIES) {
++ if (!(mdio_read(dev, phy_id, MII_BMCR) & BMCR_RESET)) {
++#if DEBUG_MDIO
++ printk(KERN_DEBUG "%s: phy_reset() took %i cycles\n",
++ dev->name, cycles);
++#endif
++ return;
++ }
++ udelay(1);
++ cycles++;
++ }
++
++ printk(KERN_ERR "%s: MII reset failed\n", dev->name);
++}
++
++static void eth_set_duplex(struct port *port)
++{
++ if (port->mii.full_duplex)
++ __raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX,
++ &port->regs->tx_control[0]);
++ else
++ __raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX,
++ &port->regs->tx_control[0]);
++}
++
++
++static void phy_check_media(struct port *port, int init)
++{
++ if (mii_check_media(&port->mii, 1, init))
++ eth_set_duplex(port);
++ if (port->mii.force_media) { /* mii_check_media() doesn't work */
++ struct net_device *dev = port->netdev;
++ int cur_link = mii_link_ok(&port->mii);
++ int prev_link = netif_carrier_ok(dev);
++
++ if (!prev_link && cur_link) {
++ printk(KERN_INFO "%s: link up\n", dev->name);
++ netif_carrier_on(dev);
++ } else if (prev_link && !cur_link) {
++ printk(KERN_INFO "%s: link down\n", dev->name);
++ netif_carrier_off(dev);
++ }
++ }
++}
++
++
++static void mdio_thread(struct work_struct *work)
++{
++ struct port *port = container_of(work, struct port, mdio_thread.work);
++
++ phy_check_media(port, 0);
++ schedule_delayed_work(&port->mdio_thread, MDIO_INTERVAL);
++}
++
++
++static inline void debug_pkt(struct net_device *dev, const char *func,
++ u8 *data, int len)
++{
++#if DEBUG_PKT_BYTES
++ int i;
++
++ printk(KERN_DEBUG "%s: %s(%i) ", dev->name, func, len);
++ for (i = 0; i < len; i++) {
++ if (i >= DEBUG_PKT_BYTES)
++ break;
++ printk("%s%02X",
++ ((i == 6) || (i == 12) || (i >= 14)) ? " " : "",
++ data[i]);
++ }
++ printk("\n");
++#endif
++}
++
++
++static inline void debug_desc(u32 phys, struct desc *desc)
++{
++#if DEBUG_DESC
++ printk(KERN_DEBUG "%X: %X %3X %3X %08X %2X < %2X %4X %X"
++ " %X %X %02X%02X%02X%02X%02X%02X < %02X%02X%02X%02X%02X%02X\n",
++ phys, desc->next, desc->buf_len, desc->pkt_len,
++ desc->data, desc->dest_id, desc->src_id, desc->flags,
++ desc->qos, desc->padlen, desc->vlan_tci,
++ desc->dst_mac_0, desc->dst_mac_1, desc->dst_mac_2,
++ desc->dst_mac_3, desc->dst_mac_4, desc->dst_mac_5,
++ desc->src_mac_0, desc->src_mac_1, desc->src_mac_2,
++ desc->src_mac_3, desc->src_mac_4, desc->src_mac_5);
++#endif
++}
++
++static inline void debug_queue(unsigned int queue, int is_get, u32 phys)
++{
++#if DEBUG_QUEUES
++ static struct {
++ int queue;
++ char *name;
++ } names[] = {
++ { TX_QUEUE(0x10), "TX#0 " },
++ { TX_QUEUE(0x20), "TX#1 " },
++ { TX_QUEUE(0x00), "TX#2 " },
++ { RXFREE_QUEUE(0x10), "RX-free#0 " },
++ { RXFREE_QUEUE(0x20), "RX-free#1 " },
++ { RXFREE_QUEUE(0x00), "RX-free#2 " },
++ { TXDONE_QUEUE, "TX-done " },
++ };
++ int i;
++
++ for (i = 0; i < ARRAY_SIZE(names); i++)
++ if (names[i].queue == queue)
++ break;
++
++ printk(KERN_DEBUG "Queue %i %s%s %X\n", queue,
++ i < ARRAY_SIZE(names) ? names[i].name : "",
++ is_get ? "->" : "<-", phys);
++#endif
++}
++
++static inline u32 queue_get_entry(unsigned int queue)
++{
++ u32 phys = qmgr_get_entry(queue);
++ debug_queue(queue, 1, phys);
++ return phys;
++}
++
++static inline int queue_get_desc(unsigned int queue, struct port *port,
++ int is_tx)
++{
++ u32 phys, tab_phys, n_desc;
++ struct desc *tab;
++
++ if (!(phys = queue_get_entry(queue)))
++ return -1;
++
++ phys &= ~0x1F; /* mask out non-address bits */
++ tab_phys = is_tx ? tx_desc_phys(port, 0) : rx_desc_phys(port, 0);
++ tab = is_tx ? tx_desc_ptr(port, 0) : rx_desc_ptr(port, 0);
++ n_desc = (phys - tab_phys) / sizeof(struct desc);
++ BUG_ON(n_desc >= (is_tx ? TX_DESCS : RX_DESCS));
++ debug_desc(phys, &tab[n_desc]);
++ BUG_ON(tab[n_desc].next);
++ return n_desc;
++}
++
++static inline void queue_put_desc(unsigned int queue, u32 phys,
++ struct desc *desc)
++{
++ debug_queue(queue, 0, phys);
++ debug_desc(phys, desc);
++ BUG_ON(phys & 0x1F);
++ qmgr_put_entry(queue, phys);
++ BUG_ON(qmgr_stat_overflow(queue));
++}
++
++
++static inline void dma_unmap_tx(struct port *port, struct desc *desc)
++{
++#ifdef __ARMEB__
++ dma_unmap_single(&port->netdev->dev, desc->data,
++ desc->buf_len, DMA_TO_DEVICE);
++#else
++ dma_unmap_single(&port->netdev->dev, desc->data & ~3,
++ ALIGN((desc->data & 3) + desc->buf_len, 4),
++ DMA_TO_DEVICE);
++#endif
++}
++
++
++static void eth_rx_irq(void *pdev)
++{
++ struct net_device *dev = pdev;
++ struct port *port = netdev_priv(dev);
++
++#if DEBUG_RX
++ printk(KERN_DEBUG "%s: eth_rx_irq\n", dev->name);
++#endif
++ qmgr_disable_irq(port->plat->rxq);
++ netif_rx_schedule(dev, &port->napi);
++}
++
++static int eth_poll(struct napi_struct *napi, int budget)
++{
++ struct port *port = container_of(napi, struct port, napi);
++ struct net_device *dev = port->netdev;
++ unsigned int rxq = port->plat->rxq, rxfreeq = RXFREE_QUEUE(port->id);
++ int received = 0;
++
++#if DEBUG_RX
++ printk(KERN_DEBUG "%s: eth_poll\n", dev->name);
++#endif
++
++ while (received < budget) {
++ struct sk_buff *skb;
++ struct desc *desc;
++ int n;
++#ifdef __ARMEB__
++ struct sk_buff *temp;
++ u32 phys;
++#endif
++
++ if ((n = queue_get_desc(rxq, port, 0)) < 0) {
++ received = 0; /* No packet received */
++#if DEBUG_RX
++ printk(KERN_DEBUG "%s: eth_poll netif_rx_complete\n",
++ dev->name);
++#endif
++ netif_rx_complete(dev, napi);
++ qmgr_enable_irq(rxq);
++ if (!qmgr_stat_empty(rxq) &&
++ netif_rx_reschedule(dev, napi)) {
++#if DEBUG_RX
++ printk(KERN_DEBUG "%s: eth_poll"
++ " netif_rx_reschedule successed\n",
++ dev->name);
++#endif
++ qmgr_disable_irq(rxq);
++ continue;
++ }
++#if DEBUG_RX
++ printk(KERN_DEBUG "%s: eth_poll all done\n",
++ dev->name);
++#endif
++ return 0; /* all work done */
++ }
++
++ desc = rx_desc_ptr(port, n);
++
++#ifdef __ARMEB__
++ if ((skb = netdev_alloc_skb(dev, RX_BUFF_SIZE))) {
++ phys = dma_map_single(&dev->dev, skb->data,
++ RX_BUFF_SIZE, DMA_FROM_DEVICE);
++ if (dma_mapping_error(phys)) {
++ dev_kfree_skb(skb);
++ skb = NULL;
++ }
++ }
++#else
++ skb = netdev_alloc_skb(dev,
++ ALIGN(NET_IP_ALIGN + desc->pkt_len, 4));
++#endif
++
++ if (!skb) {
++ port->stat.rx_dropped++;
++ /* put the desc back on RX-ready queue */
++ desc->buf_len = MAX_MRU;
++ desc->pkt_len = 0;
++ queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
++ continue;
++ }
++
++ /* process received frame */
++#ifdef __ARMEB__
++ temp = skb;
++ skb = port->rx_buff_tab[n];
++ dma_unmap_single(&dev->dev, desc->data - NET_IP_ALIGN,
++ RX_BUFF_SIZE, DMA_FROM_DEVICE);
++#else
++ dma_sync_single(&dev->dev, desc->data - NET_IP_ALIGN,
++ RX_BUFF_SIZE, DMA_FROM_DEVICE);
++ memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n],
++ ALIGN(NET_IP_ALIGN + desc->pkt_len, 4) / 4);
++#endif
++ skb_reserve(skb, NET_IP_ALIGN);
++ skb_put(skb, desc->pkt_len);
++
++ debug_pkt(dev, "eth_poll", skb->data, skb->len);
++
++ skb->protocol = eth_type_trans(skb, dev);
++ dev->last_rx = jiffies;
++ port->stat.rx_packets++;
++ port->stat.rx_bytes += skb->len;
++ netif_receive_skb(skb);
++
++ /* put the new buffer on RX-free queue */
++#ifdef __ARMEB__
++ port->rx_buff_tab[n] = temp;
++ desc->data = phys + NET_IP_ALIGN;
++#endif
++ desc->buf_len = MAX_MRU;
++ desc->pkt_len = 0;
++ queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
++ received++;
++ }
++
++#if DEBUG_RX
++ printk(KERN_DEBUG "eth_poll(): end, not all work done\n");
++#endif
++ return received; /* not all work done */
++}
++
++
++static void eth_txdone_irq(void *unused)
++{
++ u32 phys;
++
++#if DEBUG_TX
++ printk(KERN_DEBUG DRV_NAME ": eth_txdone_irq\n");
++#endif
++ while ((phys = queue_get_entry(TXDONE_QUEUE)) != 0) {
++ u32 npe_id, n_desc;
++ struct port *port;
++ struct desc *desc;
++ int start;
++
++ npe_id = phys & 3;
++ BUG_ON(npe_id >= MAX_NPES);
++ port = npe_port_tab[npe_id];
++ BUG_ON(!port);
++ phys &= ~0x1F; /* mask out non-address bits */
++ n_desc = (phys - tx_desc_phys(port, 0)) / sizeof(struct desc);
++ BUG_ON(n_desc >= TX_DESCS);
++ desc = tx_desc_ptr(port, n_desc);
++ debug_desc(phys, desc);
++
++ if (port->tx_buff_tab[n_desc]) { /* not the draining packet */
++ port->stat.tx_packets++;
++ port->stat.tx_bytes += desc->pkt_len;
++
++ dma_unmap_tx(port, desc);
++#if DEBUG_TX
++ printk(KERN_DEBUG "%s: eth_txdone_irq free %p\n",
++ port->netdev->name, port->tx_buff_tab[n_desc]);
++#endif
++ free_buffer_irq(port->tx_buff_tab[n_desc]);
++ port->tx_buff_tab[n_desc] = NULL;
++ }
++
++ start = qmgr_stat_empty(port->plat->txreadyq);
++ queue_put_desc(port->plat->txreadyq, phys, desc);
++ if (start) {
++#if DEBUG_TX
++ printk(KERN_DEBUG "%s: eth_txdone_irq xmit ready\n",
++ port->netdev->name);
++#endif
++ netif_wake_queue(port->netdev);
++ }
++ }
++}
++
++static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++ struct port *port = netdev_priv(dev);
++ unsigned int txreadyq = port->plat->txreadyq;
++ int len, offset, bytes, n;
++ void *mem;
++ u32 phys;
++ struct desc *desc;
++
++#if DEBUG_TX
++ printk(KERN_DEBUG "%s: eth_xmit\n", dev->name);
++#endif
++
++ if (unlikely(skb->len > MAX_MRU)) {
++ dev_kfree_skb(skb);
++ port->stat.tx_errors++;
++ return NETDEV_TX_OK;
++ }
++
++ debug_pkt(dev, "eth_xmit", skb->data, skb->len);
++
++ len = skb->len;
++#ifdef __ARMEB__
++ offset = 0; /* no need to keep alignment */
++ bytes = len;
++ mem = skb->data;
++#else
++ offset = (int)skb->data & 3; /* keep 32-bit alignment */
++ bytes = ALIGN(offset + len, 4);
++ if (!(mem = kmalloc(bytes, GFP_ATOMIC))) {
++ dev_kfree_skb(skb);
++ port->stat.tx_dropped++;
++ return NETDEV_TX_OK;
++ }
++ memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
++ dev_kfree_skb(skb);
++#endif
++
++ phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE);
++ if (dma_mapping_error(phys)) {
++#ifdef __ARMEB__
++ dev_kfree_skb(skb);
++#else
++ kfree(mem);
++#endif
++ port->stat.tx_dropped++;
++ return NETDEV_TX_OK;
++ }
++
++ n = queue_get_desc(txreadyq, port, 1);
++ BUG_ON(n < 0);
++ desc = tx_desc_ptr(port, n);
++
++#ifdef __ARMEB__
++ port->tx_buff_tab[n] = skb;
++#else
++ port->tx_buff_tab[n] = mem;
++#endif
++ desc->data = phys + offset;
++ desc->buf_len = desc->pkt_len = len;
++
++ /* NPE firmware pads short frames with zeros internally */
++ wmb();
++ queue_put_desc(TX_QUEUE(port->id), tx_desc_phys(port, n), desc);
++ dev->trans_start = jiffies;
++
++ if (qmgr_stat_empty(txreadyq)) {
++#if DEBUG_TX
++ printk(KERN_DEBUG "%s: eth_xmit queue full\n", dev->name);
++#endif
++ netif_stop_queue(dev);
++ /* we could miss TX ready interrupt */
++ if (!qmgr_stat_empty(txreadyq)) {
++#if DEBUG_TX
++ printk(KERN_DEBUG "%s: eth_xmit ready again\n",
++ dev->name);
++#endif
++ netif_wake_queue(dev);
++ }
++ }
++
++#if DEBUG_TX
++ printk(KERN_DEBUG "%s: eth_xmit end\n", dev->name);
++#endif
++ return NETDEV_TX_OK;
++}
++
++
++static struct net_device_stats *eth_stats(struct net_device *dev)
++{
++ struct port *port = netdev_priv(dev);
++ return &port->stat;
++}
++
++static void eth_set_mcast_list(struct net_device *dev)
++{
++ struct port *port = netdev_priv(dev);
++ struct dev_mc_list *mclist = dev->mc_list;
++ u8 diffs[ETH_ALEN], *addr;
++ int cnt = dev->mc_count, i;
++
++ if ((dev->flags & IFF_PROMISC) || !mclist || !cnt) {
++ __raw_writel(DEFAULT_RX_CNTRL0 & ~RX_CNTRL0_ADDR_FLTR_EN,
++ &port->regs->rx_control[0]);
++ return;
++ }
++
++ memset(diffs, 0, ETH_ALEN);
++ addr = mclist->dmi_addr; /* first MAC address */
++
++ while (--cnt && (mclist = mclist->next))
++ for (i = 0; i < ETH_ALEN; i++)
++ diffs[i] |= addr[i] ^ mclist->dmi_addr[i];
++
++ for (i = 0; i < ETH_ALEN; i++) {
++ __raw_writel(addr[i], &port->regs->mcast_addr[i]);
++ __raw_writel(~diffs[i], &port->regs->mcast_mask[i]);
++ }
++
++ __raw_writel(DEFAULT_RX_CNTRL0 | RX_CNTRL0_ADDR_FLTR_EN,
++ &port->regs->rx_control[0]);
++}
++
++
++static int eth_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
++{
++ struct port *port = netdev_priv(dev);
++ unsigned int duplex_chg;
++ int err;
++
++ if (!netif_running(dev))
++ return -EINVAL;
++ err = generic_mii_ioctl(&port->mii, if_mii(req), cmd, &duplex_chg);
++ if (duplex_chg)
++ eth_set_duplex(port);
++ return err;
++}
++
++
++static int request_queues(struct port *port)
++{
++ int err;
++
++ err = qmgr_request_queue(RXFREE_QUEUE(port->id), RX_DESCS, 0, 0);
++ if (err)
++ return err;
++
++ err = qmgr_request_queue(port->plat->rxq, RX_DESCS, 0, 0);
++ if (err)
++ goto rel_rxfree;
++
++ err = qmgr_request_queue(TX_QUEUE(port->id), TX_DESCS, 0, 0);
++ if (err)
++ goto rel_rx;
++
++ err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0);
++ if (err)
++ goto rel_tx;
++
++ /* TX-done queue handles skbs sent out by the NPEs */
++ if (!ports_open) {
++ err = qmgr_request_queue(TXDONE_QUEUE, TXDONE_QUEUE_LEN, 0, 0);
++ if (err)
++ goto rel_txready;
++ }
++ return 0;
++
++rel_txready:
++ qmgr_release_queue(port->plat->txreadyq);
++rel_tx:
++ qmgr_release_queue(TX_QUEUE(port->id));
++rel_rx:
++ qmgr_release_queue(port->plat->rxq);
++rel_rxfree:
++ qmgr_release_queue(RXFREE_QUEUE(port->id));
++ printk(KERN_DEBUG "%s: unable to request hardware queues\n",
++ port->netdev->name);
++ return err;
++}
++
++static void release_queues(struct port *port)
++{
++ qmgr_release_queue(RXFREE_QUEUE(port->id));
++ qmgr_release_queue(port->plat->rxq);
++ qmgr_release_queue(TX_QUEUE(port->id));
++ qmgr_release_queue(port->plat->txreadyq);
++
++ if (!ports_open)
++ qmgr_release_queue(TXDONE_QUEUE);
++}
++
++static int init_queues(struct port *port)
++{
++ int i;
++
++ if (!ports_open)
++ if (!(dma_pool = dma_pool_create(DRV_NAME, NULL,
++ POOL_ALLOC_SIZE, 32, 0)))
++ return -ENOMEM;
++
++ if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL,
++ &port->desc_tab_phys)))
++ return -ENOMEM;
++ memset(port->desc_tab, 0, POOL_ALLOC_SIZE);
++ memset(port->rx_buff_tab, 0, sizeof(port->rx_buff_tab)); /* tables */
++ memset(port->tx_buff_tab, 0, sizeof(port->tx_buff_tab));
++
++ /* Setup RX buffers */
++ for (i = 0; i < RX_DESCS; i++) {
++ struct desc *desc = rx_desc_ptr(port, i);
++ buffer_t *buff; /* skb or kmalloc()ated memory */
++ void *data;
++#ifdef __ARMEB__
++ if (!(buff = netdev_alloc_skb(port->netdev, RX_BUFF_SIZE)))
++ return -ENOMEM;
++ data = buff->data;
++#else
++ if (!(buff = kmalloc(RX_BUFF_SIZE, GFP_KERNEL)))
++ return -ENOMEM;
++ data = buff;
++#endif
++ desc->buf_len = MAX_MRU;
++ desc->data = dma_map_single(&port->netdev->dev, data,
++ RX_BUFF_SIZE, DMA_FROM_DEVICE);
++ if (dma_mapping_error(desc->data)) {
++ free_buffer(buff);
++ return -EIO;
++ }
++ desc->data += NET_IP_ALIGN;
++ port->rx_buff_tab[i] = buff;
++ }
++
++ return 0;
++}
++
++static void destroy_queues(struct port *port)
++{
++ int i;
++
++ if (port->desc_tab) {
++ for (i = 0; i < RX_DESCS; i++) {
++ struct desc *desc = rx_desc_ptr(port, i);
++ buffer_t *buff = port->rx_buff_tab[i];
++ if (buff) {
++ dma_unmap_single(&port->netdev->dev,
++ desc->data - NET_IP_ALIGN,
++ RX_BUFF_SIZE, DMA_FROM_DEVICE);
++ free_buffer(buff);
++ }
++ }
++ for (i = 0; i < TX_DESCS; i++) {
++ struct desc *desc = tx_desc_ptr(port, i);
++ buffer_t *buff = port->tx_buff_tab[i];
++ if (buff) {
++ dma_unmap_tx(port, desc);
++ free_buffer(buff);
++ }
++ }
++ dma_pool_free(dma_pool, port->desc_tab, port->desc_tab_phys);
++ port->desc_tab = NULL;
++ }
++
++ if (!ports_open && dma_pool) {
++ dma_pool_destroy(dma_pool);
++ dma_pool = NULL;
++ }
++}
++
++static int eth_open(struct net_device *dev)
++{
++ struct port *port = netdev_priv(dev);
++ struct npe *npe = port->npe;
++ struct msg msg;
++ int i, err;
++
++ if (!npe_running(npe)) {
++ err = npe_load_firmware(npe, npe_name(npe), &dev->dev);
++ if (err)
++ return err;
++
++ if (npe_recv_message(npe, &msg, "ETH_GET_STATUS")) {
++ printk(KERN_ERR "%s: %s not responding\n", dev->name,
++ npe_name(npe));
++ return -EIO;
++ }
++ }
++
++ mdio_write(dev, port->plat->phy, MII_BMCR, port->mii_bmcr);
++
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = NPE_VLAN_SETRXQOSENTRY;
++ msg.eth_id = port->id;
++ msg.byte5 = port->plat->rxq | 0x80;
++ msg.byte7 = port->plat->rxq << 4;
++ for (i = 0; i < 8; i++) {
++ msg.byte3 = i;
++ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_RXQ"))
++ return -EIO;
++ }
++
++ msg.cmd = NPE_EDB_SETPORTADDRESS;
++ msg.eth_id = PHYSICAL_ID(port->id);
++ msg.byte2 = dev->dev_addr[0];
++ msg.byte3 = dev->dev_addr[1];
++ msg.byte4 = dev->dev_addr[2];
++ msg.byte5 = dev->dev_addr[3];
++ msg.byte6 = dev->dev_addr[4];
++ msg.byte7 = dev->dev_addr[5];
++ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_MAC"))
++ return -EIO;
++
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = NPE_FW_SETFIREWALLMODE;
++ msg.eth_id = port->id;
++ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE"))
++ return -EIO;
++
++ if ((err = request_queues(port)) != 0)
++ return err;
++
++ if ((err = init_queues(port)) != 0) {
++ destroy_queues(port);
++ release_queues(port);
++ return err;
++ }
++
++ for (i = 0; i < ETH_ALEN; i++)
++ __raw_writel(dev->dev_addr[i], &port->regs->hw_addr[i]);
++ __raw_writel(0x08, &port->regs->random_seed);
++ __raw_writel(0x12, &port->regs->partial_empty_threshold);
++ __raw_writel(0x30, &port->regs->partial_full_threshold);
++ __raw_writel(0x08, &port->regs->tx_start_bytes);
++ __raw_writel(0x15, &port->regs->tx_deferral);
++ __raw_writel(0x08, &port->regs->tx_2part_deferral[0]);
++ __raw_writel(0x07, &port->regs->tx_2part_deferral[1]);
++ __raw_writel(0x80, &port->regs->slot_time);
++ __raw_writel(0x01, &port->regs->int_clock_threshold);
++
++ /* Populate queues with buffers, no failure after this point */
++ for (i = 0; i < TX_DESCS; i++)
++ queue_put_desc(port->plat->txreadyq,
++ tx_desc_phys(port, i), tx_desc_ptr(port, i));
++
++ for (i = 0; i < RX_DESCS; i++)
++ queue_put_desc(RXFREE_QUEUE(port->id),
++ rx_desc_phys(port, i), rx_desc_ptr(port, i));
++
++ __raw_writel(TX_CNTRL1_RETRIES, &port->regs->tx_control[1]);
++ __raw_writel(DEFAULT_TX_CNTRL0, &port->regs->tx_control[0]);
++ __raw_writel(0, &port->regs->rx_control[1]);
++ __raw_writel(DEFAULT_RX_CNTRL0, &port->regs->rx_control[0]);
++
++ napi_enable(&port->napi);
++ phy_check_media(port, 1);
++ eth_set_mcast_list(dev);
++ netif_start_queue(dev);
++ schedule_delayed_work(&port->mdio_thread, MDIO_INTERVAL);
++
++ qmgr_set_irq(port->plat->rxq, QUEUE_IRQ_SRC_NOT_EMPTY,
++ eth_rx_irq, dev);
++ if (!ports_open) {
++ qmgr_set_irq(TXDONE_QUEUE, QUEUE_IRQ_SRC_NOT_EMPTY,
++ eth_txdone_irq, NULL);
++ qmgr_enable_irq(TXDONE_QUEUE);
++ }
++ ports_open++;
++ netif_rx_schedule(dev, &port->napi); /* we may already have RX data, enables IRQ */
++ return 0;
++}
++
++static int eth_close(struct net_device *dev)
++{
++ struct port *port = netdev_priv(dev);
++ struct msg msg;
++ int buffs = RX_DESCS; /* allocated RX buffers */
++ int i;
++
++ ports_open--;
++ qmgr_disable_irq(port->plat->rxq);
++ napi_disable(&port->napi);
++ netif_stop_queue(dev);
++
++ while (queue_get_desc(RXFREE_QUEUE(port->id), port, 0) >= 0)
++ buffs--;
++
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = NPE_SETLOOPBACK_MODE;
++ msg.eth_id = port->id;
++ msg.byte3 = 1;
++ if (npe_send_recv_message(port->npe, &msg, "ETH_ENABLE_LOOPBACK"))
++ printk(KERN_CRIT "%s: unable to enable loopback\n", dev->name);
++
++ i = 0;
++ do { /* drain RX buffers */
++ while (queue_get_desc(port->plat->rxq, port, 0) >= 0)
++ buffs--;
++ if (!buffs)
++ break;
++ if (qmgr_stat_empty(TX_QUEUE(port->id))) {
++ /* we have to inject some packet */
++ struct desc *desc;
++ u32 phys;
++ int n = queue_get_desc(port->plat->txreadyq, port, 1);
++ BUG_ON(n < 0);
++ desc = tx_desc_ptr(port, n);
++ phys = tx_desc_phys(port, n);
++ desc->buf_len = desc->pkt_len = 1;
++ wmb();
++ queue_put_desc(TX_QUEUE(port->id), phys, desc);
++ }
++ udelay(1);
++ } while (++i < MAX_CLOSE_WAIT);
++
++ if (buffs)
++ printk(KERN_CRIT "%s: unable to drain RX queue, %i buffer(s)"
++ " left in NPE\n", dev->name, buffs);
++#if DEBUG_CLOSE
++ if (!buffs)
++ printk(KERN_DEBUG "Draining RX queue took %i cycles\n", i);
++#endif
++
++ buffs = TX_DESCS;
++ while (queue_get_desc(TX_QUEUE(port->id), port, 1) >= 0)
++ buffs--; /* cancel TX */
++
++ i = 0;
++ do {
++ while (queue_get_desc(port->plat->txreadyq, port, 1) >= 0)
++ buffs--;
++ if (!buffs)
++ break;
++ } while (++i < MAX_CLOSE_WAIT);
++
++ if (buffs)
++ printk(KERN_CRIT "%s: unable to drain TX queue, %i buffer(s) "
++ "left in NPE\n", dev->name, buffs);
++#if DEBUG_CLOSE
++ if (!buffs)
++ printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i);
++#endif
++
++ msg.byte3 = 0;
++ if (npe_send_recv_message(port->npe, &msg, "ETH_DISABLE_LOOPBACK"))
++ printk(KERN_CRIT "%s: unable to disable loopback\n",
++ dev->name);
++
++ port->mii_bmcr = mdio_read(dev, port->plat->phy, MII_BMCR) &
++ ~(BMCR_RESET | BMCR_PDOWN); /* may have been altered */
++ mdio_write(dev, port->plat->phy, MII_BMCR,
++ port->mii_bmcr | BMCR_PDOWN);
++
++ if (!ports_open)
++ qmgr_disable_irq(TXDONE_QUEUE);
++ cancel_rearming_delayed_work(&port->mdio_thread);
++ destroy_queues(port);
++ release_queues(port);
++ return 0;
++}
++
++static int __devinit eth_init_one(struct platform_device *pdev)
++{
++ struct port *port;
++ struct net_device *dev;
++ struct eth_plat_info *plat = pdev->dev.platform_data;
++ u32 regs_phys;
++ int err;
++
++ if (!(dev = alloc_etherdev(sizeof(struct port))))
++ return -ENOMEM;
++
++ SET_NETDEV_DEV(dev, &pdev->dev);
++ port = netdev_priv(dev);
++ port->netdev = dev;
++ port->id = pdev->id;
++
++ switch (port->id) {
++ case IXP4XX_ETH_NPEA:
++ port->regs = (struct eth_regs __iomem *)IXP4XX_EthA_BASE_VIRT;
++ regs_phys = IXP4XX_EthA_BASE_PHYS;
++ break;
++ case IXP4XX_ETH_NPEB:
++ port->regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
++ regs_phys = IXP4XX_EthB_BASE_PHYS;
++ break;
++ case IXP4XX_ETH_NPEC:
++ port->regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT;
++ regs_phys = IXP4XX_EthC_BASE_PHYS;
++ break;
++ default:
++ err = -ENOSYS;
++ goto err_free;
++ }
++
++ dev->open = eth_open;
++ dev->hard_start_xmit = eth_xmit;
++ dev->stop = eth_close;
++ dev->get_stats = eth_stats;
++ dev->do_ioctl = eth_ioctl;
++ dev->set_multicast_list = eth_set_mcast_list;
++ dev->tx_queue_len = 100;
++
++ netif_napi_add(dev, &port->napi, eth_poll, NAPI_WEIGHT);
++
++ if (!(port->npe = npe_request(NPE_ID(port->id)))) {
++ err = -EIO;
++ goto err_free;
++ }
++
++ if (register_netdev(dev)) {
++ err = -EIO;
++ goto err_npe_rel;
++ }
++
++ port->mem_res = request_mem_region(regs_phys, REGS_SIZE, dev->name);
++ if (!port->mem_res) {
++ err = -EBUSY;
++ goto err_unreg;
++ }
++
++ port->plat = plat;
++ npe_port_tab[NPE_ID(port->id)] = port;
++ memcpy(dev->dev_addr, plat->hwaddr, ETH_ALEN);
++
++ platform_set_drvdata(pdev, dev);
++
++ __raw_writel(DEFAULT_CORE_CNTRL | CORE_RESET,
++ &port->regs->core_control);
++ udelay(50);
++ __raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
++ udelay(50);
++
++ port->mii.dev = dev;
++ port->mii.mdio_read = mdio_read;
++ port->mii.mdio_write = mdio_write;
++ port->mii.phy_id = plat->phy;
++ port->mii.phy_id_mask = 0x1F;
++ port->mii.reg_num_mask = 0x1F;
++
++ printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
++ npe_name(port->npe));
++
++ phy_reset(dev, plat->phy);
++ port->mii_bmcr = mdio_read(dev, plat->phy, MII_BMCR) &
++ ~(BMCR_RESET | BMCR_PDOWN);
++ mdio_write(dev, plat->phy, MII_BMCR, port->mii_bmcr | BMCR_PDOWN);
++
++ INIT_DELAYED_WORK(&port->mdio_thread, mdio_thread);
++ return 0;
++
++err_unreg:
++ unregister_netdev(dev);
++err_npe_rel:
++ npe_release(port->npe);
++err_free:
++ free_netdev(dev);
++ return err;
++}
++
++static int __devexit eth_remove_one(struct platform_device *pdev)
++{
++ struct net_device *dev = platform_get_drvdata(pdev);
++ struct port *port = netdev_priv(dev);
++
++ unregister_netdev(dev);
++ npe_port_tab[NPE_ID(port->id)] = NULL;
++ platform_set_drvdata(pdev, NULL);
++ npe_release(port->npe);
++ release_resource(port->mem_res);
++ free_netdev(dev);
++ return 0;
++}
++
++static struct platform_driver drv = {
++ .driver.name = DRV_NAME,
++ .probe = eth_init_one,
++ .remove = eth_remove_one,
++};
++
++static int __init eth_init_module(void)
++{
++ if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
++ return -ENOSYS;
++
++ /* All MII PHY accesses use NPE-B Ethernet registers */
++ spin_lock_init(&mdio_lock);
++ mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
++ __raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
++
++ return platform_driver_register(&drv);
++}
++
++static void __exit eth_cleanup_module(void)
++{
++ platform_driver_unregister(&drv);
++}
++
++MODULE_AUTHOR("Krzysztof Halasa");
++MODULE_DESCRIPTION("Intel IXP4xx Ethernet driver");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:ixp4xx_eth");
++module_init(eth_init_module);
++module_exit(eth_cleanup_module);
+diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
+index a3df09e..94e7aa7 100644
+--- a/drivers/net/wan/Kconfig
++++ b/drivers/net/wan/Kconfig
+@@ -334,6 +334,15 @@ config DSCC4_PCI_RST
+
+ Say Y if your card supports this feature.
+
++config IXP4XX_HSS
++ tristate "IXP4xx HSS (synchronous serial port) support"
++ depends on HDLC && ARM && ARCH_IXP4XX
++ select IXP4XX_NPE
++ select IXP4XX_QMGR
++ help
++ Say Y here if you want to use built-in HSS ports
++ on IXP4xx processor.
++
+ config DLCI
+ tristate "Frame Relay DLCI support"
+ ---help---
+diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
+index d61fef3..1b1d116 100644
+--- a/drivers/net/wan/Makefile
++++ b/drivers/net/wan/Makefile
+@@ -42,6 +42,7 @@ obj-$(CONFIG_C101) += c101.o
+ obj-$(CONFIG_WANXL) += wanxl.o
+ obj-$(CONFIG_PCI200SYN) += pci200syn.o
+ obj-$(CONFIG_PC300TOO) += pc300too.o
++obj-$(CONFIG_IXP4XX_HSS) += ixp4xx_hss.o
+
+ clean-files := wanxlfw.inc
+ $(obj)/wanxl.o: $(obj)/wanxlfw.inc
+diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
+new file mode 100644
+index 0000000..cf971b3
+--- /dev/null
++++ b/drivers/net/wan/ixp4xx_hss.c
+@@ -0,0 +1,2886 @@
++/*
++ * Intel IXP4xx HSS (synchronous serial port) driver for Linux
++ *
++ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of version 2 of the GNU General Public License
++ * as published by the Free Software Foundation.
++ */
++
++#include <linux/bitops.h>
++#include <linux/cdev.h>
++#include <linux/dma-mapping.h>
++#include <linux/dmapool.h>
++#include <linux/fs.h>
++#include <linux/io.h>
++#include <linux/kernel.h>
++#include <linux/hdlc.h>
++#include <linux/platform_device.h>
++#include <linux/poll.h>
++#include <asm/arch/npe.h>
++#include <asm/arch/qmgr.h>
++
++#define DEBUG_QUEUES 0
++#define DEBUG_DESC 0
++#define DEBUG_RX 0
++#define DEBUG_TX 0
++#define DEBUG_PKT_BYTES 0
++#define DEBUG_CLOSE 0
++#define DEBUG_FRAMER 0
++
++#define DRV_NAME "ixp4xx_hss"
++
++#define PKT_EXTRA_FLAGS 0 /* orig 1 */
++#define TX_FRAME_SYNC_OFFSET 0 /* channelized */
++#define PKT_NUM_PIPES 1 /* 1, 2 or 4 */
++#define PKT_PIPE_FIFO_SIZEW 4 /* total 4 dwords per HSS */
++
++#define RX_DESCS 16 /* also length of all RX queues */
++#define TX_DESCS 16 /* also length of all TX queues */
++
++#define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS))
++#define RX_SIZE (HDLC_MAX_MRU + 4) /* NPE needs more space */
++#define MAX_CLOSE_WAIT 1000 /* microseconds */
++#define HSS_COUNT 2
++#define MIN_FRAME_SIZE 16 /* bits */
++#define MAX_FRAME_SIZE 257 /* 256 bits + framing bit */
++#define MAX_CHANNELS (MAX_FRAME_SIZE / 8)
++#define MAX_CHAN_DEVICES 32
++#define CHANNEL_HDLC 0xFE
++#define CHANNEL_UNUSED 0xFF
++
++#define NAPI_WEIGHT 16
++#define CHAN_RX_TRIGGER 16 /* 8 RX frames = 1 ms @ E1 */
++#define CHAN_RX_FRAMES 64
++#define MAX_CHAN_RX_BAD_SYNC (CHAN_RX_TRIGGER / 2 /* pairs */ - 3)
++#define CHAN_TX_LIST_FRAMES 16 /* bytes/channel per list, 16 - 48 */
++#define CHAN_TX_LISTS 8
++#define CHAN_TX_FRAMES (CHAN_TX_LIST_FRAMES * CHAN_TX_LISTS)
++#define CHAN_QUEUE_LEN 16 /* minimum possible */
++
++
++/* Queue IDs */
++#define HSS0_CHL_RXTRIG_QUEUE 12 /* orig size = 32 dwords */
++#define HSS0_PKT_RX_QUEUE 13 /* orig size = 32 dwords */
++#define HSS0_PKT_TX0_QUEUE 14 /* orig size = 16 dwords */
++#define HSS0_PKT_TX1_QUEUE 15
++#define HSS0_PKT_TX2_QUEUE 16
++#define HSS0_PKT_TX3_QUEUE 17
++#define HSS0_PKT_RXFREE0_QUEUE 18 /* orig size = 16 dwords */
++#define HSS0_PKT_RXFREE1_QUEUE 19
++#define HSS0_PKT_RXFREE2_QUEUE 20
++#define HSS0_PKT_RXFREE3_QUEUE 21
++#define HSS0_PKT_TXDONE_QUEUE 22 /* orig size = 64 dwords */
++
++#define HSS1_CHL_RXTRIG_QUEUE 10
++#define HSS1_PKT_RX_QUEUE 0
++#define HSS1_PKT_TX0_QUEUE 5
++#define HSS1_PKT_TX1_QUEUE 6
++#define HSS1_PKT_TX2_QUEUE 7
++#define HSS1_PKT_TX3_QUEUE 8
++#define HSS1_PKT_RXFREE0_QUEUE 1
++#define HSS1_PKT_RXFREE1_QUEUE 2
++#define HSS1_PKT_RXFREE2_QUEUE 3
++#define HSS1_PKT_RXFREE3_QUEUE 4
++#define HSS1_PKT_TXDONE_QUEUE 9
++
++#define NPE_PKT_MODE_HDLC 0
++#define NPE_PKT_MODE_RAW 1
++#define NPE_PKT_MODE_56KMODE 2
++#define NPE_PKT_MODE_56KENDIAN_MSB 4
++
++/* PKT_PIPE_HDLC_CFG_WRITE flags */
++#define PKT_HDLC_IDLE_ONES 0x1 /* default = flags */
++#define PKT_HDLC_CRC_32 0x2 /* default = CRC-16 */
++#define PKT_HDLC_MSB_ENDIAN 0x4 /* default = LE */
++
++
++/* hss_config, PCRs */
++/* Frame sync sampling, default = active low */
++#define PCR_FRM_SYNC_ACTIVE_HIGH 0x40000000
++#define PCR_FRM_SYNC_FALLINGEDGE 0x80000000
++#define PCR_FRM_SYNC_RISINGEDGE 0xC0000000
++
++/* Frame sync pin: input (default) or output generated off a given clk edge */
++#define PCR_FRM_SYNC_OUTPUT_FALLING 0x20000000
++#define PCR_FRM_SYNC_OUTPUT_RISING 0x30000000
++
++/* Frame and data clock sampling on edge, default = falling */
++#define PCR_FCLK_EDGE_RISING 0x08000000
++#define PCR_DCLK_EDGE_RISING 0x04000000
++
++/* Clock direction, default = input */
++#define PCR_SYNC_CLK_DIR_OUTPUT 0x02000000
++
++/* Generate/Receive frame pulses, default = enabled */
++#define PCR_FRM_PULSE_DISABLED 0x01000000
++
++ /* Data rate is full (default) or half the configured clk speed */
++#define PCR_HALF_CLK_RATE 0x00200000
++
++/* Invert data between NPE and HSS FIFOs? (default = no) */
++#define PCR_DATA_POLARITY_INVERT 0x00100000
++
++/* TX/RX endianness, default = LSB */
++#define PCR_MSB_ENDIAN 0x00080000
++
++/* Normal (default) / open drain mode (TX only) */
++#define PCR_TX_PINS_OPEN_DRAIN 0x00040000
++
++/* No framing bit transmitted and expected on RX? (default = framing bit) */
++#define PCR_SOF_NO_FBIT 0x00020000
++
++/* Drive data pins? */
++#define PCR_TX_DATA_ENABLE 0x00010000
++
++/* Voice 56k type: drive the data pins low (default), high, high Z */
++#define PCR_TX_V56K_HIGH 0x00002000
++#define PCR_TX_V56K_HIGH_IMP 0x00004000
++
++/* Unassigned type: drive the data pins low (default), high, high Z */
++#define PCR_TX_UNASS_HIGH 0x00000800
++#define PCR_TX_UNASS_HIGH_IMP 0x00001000
++
++/* T1 @ 1.544MHz only: Fbit dictated in FIFO (default) or high Z */
++#define PCR_TX_FB_HIGH_IMP 0x00000400
++
++/* 56k data endiannes - which bit unused: high (default) or low */
++#define PCR_TX_56KE_BIT_0_UNUSED 0x00000200
++
++/* 56k data transmission type: 32/8 bit data (default) or 56K data */
++#define PCR_TX_56KS_56K_DATA 0x00000100
++
++/* hss_config, cCR */
++/* Number of packetized clients, default = 1 */
++#define CCR_NPE_HFIFO_2_HDLC 0x04000000
++#define CCR_NPE_HFIFO_3_OR_4HDLC 0x08000000
++
++/* default = no loopback */
++#define CCR_LOOPBACK 0x02000000
++
++/* HSS number, default = 0 (first) */
++#define CCR_SECOND_HSS 0x01000000
++
++
++/* hss_config, clkCR: main:10, num:10, denom:12 */
++#define CLK42X_SPEED_EXP ((0x3FF << 22) | ( 2 << 12) | 15) /*65 KHz*/
++
++#define CLK42X_SPEED_512KHZ (( 130 << 22) | ( 2 << 12) | 15)
++#define CLK42X_SPEED_1536KHZ (( 43 << 22) | ( 18 << 12) | 47)
++#define CLK42X_SPEED_1544KHZ (( 43 << 22) | ( 33 << 12) | 192)
++#define CLK42X_SPEED_2048KHZ (( 32 << 22) | ( 34 << 12) | 63)
++#define CLK42X_SPEED_4096KHZ (( 16 << 22) | ( 34 << 12) | 127)
++#define CLK42X_SPEED_8192KHZ (( 8 << 22) | ( 34 << 12) | 255)
++
++#define CLK46X_SPEED_512KHZ (( 130 << 22) | ( 24 << 12) | 127)
++#define CLK46X_SPEED_1536KHZ (( 43 << 22) | (152 << 12) | 383)
++#define CLK46X_SPEED_1544KHZ (( 43 << 22) | ( 66 << 12) | 385)
++#define CLK46X_SPEED_2048KHZ (( 32 << 22) | (280 << 12) | 511)
++#define CLK46X_SPEED_4096KHZ (( 16 << 22) | (280 << 12) | 1023)
++#define CLK46X_SPEED_8192KHZ (( 8 << 22) | (280 << 12) | 2047)
++
++
++/* hss_config, LUT entries */
++#define TDMMAP_UNASSIGNED 0
++#define TDMMAP_HDLC 1 /* HDLC - packetized */
++#define TDMMAP_VOICE56K 2 /* Voice56K - 7-bit channelized */
++#define TDMMAP_VOICE64K 3 /* Voice64K - 8-bit channelized */
++
++/* offsets into HSS config */
++#define HSS_CONFIG_TX_PCR 0x00 /* port configuration registers */
++#define HSS_CONFIG_RX_PCR 0x04
++#define HSS_CONFIG_CORE_CR 0x08 /* loopback control, HSS# */
++#define HSS_CONFIG_CLOCK_CR 0x0C /* clock generator control */
++#define HSS_CONFIG_TX_FCR 0x10 /* frame configuration registers */
++#define HSS_CONFIG_RX_FCR 0x14
++#define HSS_CONFIG_TX_LUT 0x18 /* channel look-up tables */
++#define HSS_CONFIG_RX_LUT 0x38
++
++
++/* NPE command codes */
++/* writes the ConfigWord value to the location specified by offset */
++#define PORT_CONFIG_WRITE 0x40
++
++/* triggers the NPE to load the contents of the configuration table */
++#define PORT_CONFIG_LOAD 0x41
++
++/* triggers the NPE to return an HssErrorReadResponse message */
++#define PORT_ERROR_READ 0x42
++
++/* reset NPE internal status and enable the HssChannelized operation */
++#define CHAN_FLOW_ENABLE 0x43
++#define CHAN_FLOW_DISABLE 0x44
++#define CHAN_IDLE_PATTERN_WRITE 0x45
++#define CHAN_NUM_CHANS_WRITE 0x46
++#define CHAN_RX_BUF_ADDR_WRITE 0x47
++#define CHAN_RX_BUF_CFG_WRITE 0x48
++#define CHAN_TX_BLK_CFG_WRITE 0x49
++#define CHAN_TX_BUF_ADDR_WRITE 0x4A
++#define CHAN_TX_BUF_SIZE_WRITE 0x4B
++#define CHAN_TSLOTSWITCH_ENABLE 0x4C
++#define CHAN_TSLOTSWITCH_DISABLE 0x4D
++
++/* downloads the gainWord value for a timeslot switching channel associated
++ with bypassNum */
++#define CHAN_TSLOTSWITCH_GCT_DOWNLOAD 0x4E
++
++/* triggers the NPE to reset internal status and enable the HssPacketized
++ operation for the flow specified by pPipe */
++#define PKT_PIPE_FLOW_ENABLE 0x50
++#define PKT_PIPE_FLOW_DISABLE 0x51
++#define PKT_NUM_PIPES_WRITE 0x52
++#define PKT_PIPE_FIFO_SIZEW_WRITE 0x53
++#define PKT_PIPE_HDLC_CFG_WRITE 0x54
++#define PKT_PIPE_IDLE_PATTERN_WRITE 0x55
++#define PKT_PIPE_RX_SIZE_WRITE 0x56
++#define PKT_PIPE_MODE_WRITE 0x57
++
++/* HDLC packet status values - desc->status */
++#define ERR_SHUTDOWN 1 /* stop or shutdown occurrance */
++#define ERR_HDLC_ALIGN 2 /* HDLC alignment error */
++#define ERR_HDLC_FCS 3 /* HDLC Frame Check Sum error */
++#define ERR_RXFREE_Q_EMPTY 4 /* RX-free queue became empty while receiving
++ this packet (if buf_len < pkt_len) */
++#define ERR_HDLC_TOO_LONG 5 /* HDLC frame size too long */
++#define ERR_HDLC_ABORT 6 /* abort sequence received */
++#define ERR_DISCONNECTING 7 /* disconnect is in progress */
++
++
++enum mode {MODE_HDLC = 0, MODE_RAW, MODE_G704};
++enum error_bit {TX_ERROR_BIT = 0, RX_ERROR_BIT = 1};
++enum alignment { NOT_ALIGNED = 0, EVEN_FIRST, ODD_FIRST };
++
++#ifdef __ARMEB__
++typedef struct sk_buff buffer_t;
++#define free_buffer dev_kfree_skb
++#define free_buffer_irq dev_kfree_skb_irq
++#else
++typedef void buffer_t;
++#define free_buffer kfree
++#define free_buffer_irq kfree
++#endif
++
++struct chan_device {
++ struct cdev cdev;
++ struct device *dev;
++ struct port *port;
++ unsigned int open_count, excl_open;
++ unsigned int tx_first, tx_count, rx_first, rx_count; /* bytes */
++ unsigned long errors_bitmap;
++ u8 id, chan_count;
++ u8 log_channels[MAX_CHANNELS];
++};
++
++struct port {
++ struct device *dev;
++ struct npe *npe;
++ struct net_device *netdev;
++ struct napi_struct napi;
++ struct hss_plat_info *plat;
++ buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS];
++ struct desc *desc_tab; /* coherent */
++ u32 desc_tab_phys;
++ unsigned int id;
++ atomic_t chan_tx_irq_number, chan_rx_irq_number;
++ wait_queue_head_t chan_tx_waitq, chan_rx_waitq;
++ u8 hdlc_cfg;
++
++ /* the following fields must be protected by npe_lock */
++ enum mode mode;
++ unsigned int clock_type, clock_rate, loopback;
++ unsigned int frame_size, frame_sync_offset;
++
++ struct chan_device *chan_devices[MAX_CHAN_DEVICES];
++ u8 *chan_buf;
++ u32 chan_tx_buf_phys, chan_rx_buf_phys;
++ unsigned int chan_open_count, hdlc_open;
++ unsigned int chan_started, initialized, just_set_offset;
++ enum alignment aligned, carrier;
++ unsigned int chan_last_rx, chan_last_tx;
++ /* assigned channels, may be invalid with given frame length or mode */
++ u8 channels[MAX_CHANNELS];
++ int msg_count;
++};
++
++/* NPE message structure */
++struct msg {
++#ifdef __ARMEB__
++ u8 cmd, unused, hss_port, index;
++ union {
++ struct { u8 data8a, data8b, data8c, data8d; };
++ struct { u16 data16a, data16b; };
++ struct { u32 data32; };
++ };
++#else
++ u8 index, hss_port, unused, cmd;
++ union {
++ struct { u8 data8d, data8c, data8b, data8a; };
++ struct { u16 data16b, data16a; };
++ struct { u32 data32; };
++ };
++#endif
++};
++
++/* HDLC packet descriptor */
++struct desc {
++ u32 next; /* pointer to next buffer, unused */
++
++#ifdef __ARMEB__
++ u16 buf_len; /* buffer length */
++ u16 pkt_len; /* packet length */
++ u32 data; /* pointer to data buffer in RAM */
++ u8 status;
++ u8 error_count;
++ u16 __reserved;
++#else
++ u16 pkt_len; /* packet length */
++ u16 buf_len; /* buffer length */
++ u32 data; /* pointer to data buffer in RAM */
++ u16 __reserved;
++ u8 error_count;
++ u8 status;
++#endif
++ u32 __reserved1[4];
++};
++
++
++#define rx_desc_phys(port, n) ((port)->desc_tab_phys + \
++ (n) * sizeof(struct desc))
++#define rx_desc_ptr(port, n) (&(port)->desc_tab[n])
++
++#define tx_desc_phys(port, n) ((port)->desc_tab_phys + \
++ ((n) + RX_DESCS) * sizeof(struct desc))
++#define tx_desc_ptr(port, n) (&(port)->desc_tab[(n) + RX_DESCS])
++
++#define chan_tx_buf_len(port) (port->frame_size / 8 * CHAN_TX_FRAMES)
++#define chan_tx_lists_len(port) (port->frame_size / 8 * CHAN_TX_LISTS * \
++ sizeof(u32))
++#define chan_rx_buf_len(port) (port->frame_size / 8 * CHAN_RX_FRAMES)
++
++#define chan_tx_buf(port) ((port)->chan_buf)
++#define chan_tx_lists(port) (chan_tx_buf(port) + chan_tx_buf_len(port))
++#define chan_rx_buf(port) (chan_tx_lists(port) + chan_tx_lists_len(port))
++
++#define chan_tx_lists_phys(port) ((port)->chan_tx_buf_phys + \
++ chan_tx_buf_len(port))
++
++static int hss_prepare_chan(struct port *port);
++void hss_chan_stop(struct port *port);
++
++/*****************************************************************************
++ * global variables
++ ****************************************************************************/
++
++static struct class *hss_class;
++static int chan_major;
++static int ports_open;
++static struct dma_pool *dma_pool;
++static spinlock_t npe_lock;
++
++static const struct {
++ int tx, txdone, rx, rxfree, chan;
++}queue_ids[2] = {{HSS0_PKT_TX0_QUEUE, HSS0_PKT_TXDONE_QUEUE, HSS0_PKT_RX_QUEUE,
++ HSS0_PKT_RXFREE0_QUEUE, HSS0_CHL_RXTRIG_QUEUE},
++ {HSS1_PKT_TX0_QUEUE, HSS1_PKT_TXDONE_QUEUE, HSS1_PKT_RX_QUEUE,
++ HSS1_PKT_RXFREE0_QUEUE, HSS1_CHL_RXTRIG_QUEUE},
++};
++
++/*****************************************************************************
++ * utility functions
++ ****************************************************************************/
++
++static inline struct port* dev_to_port(struct net_device *dev)
++{
++ return dev_to_hdlc(dev)->priv;
++}
++
++static inline struct chan_device* inode_to_chan_dev(struct inode *inode)
++{
++ return container_of(inode->i_cdev, struct chan_device, cdev);
++}
++
++#ifndef __ARMEB__
++static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt)
++{
++ int i;
++ for (i = 0; i < cnt; i++)
++ dest[i] = swab32(src[i]);
++}
++#endif
++
++static int get_number(const char **buf, size_t *len, unsigned int *ptr,
++ unsigned int min, unsigned int max)
++{
++ char *endp;
++ unsigned long val = simple_strtoul(*buf, &endp, 10);
++
++ if (endp == *buf || endp - *buf > *len || val < min || val > max)
++ return -EINVAL;
++ *len -= endp - *buf;
++ *buf = endp;
++ *ptr = val;
++ return 0;
++}
++
++static int parse_channels(const char **buf, size_t *len, u8 *channels)
++{
++ unsigned int ch, next = 0;
++
++ if (*len && (*buf)[*len - 1] == '\n')
++ (*len)--;
++
++ memset(channels, 0, MAX_CHANNELS);
++
++ if (!*len)
++ return 0;
++
++ /* Format: "A,B-C,...", A > B > C */
++ while (1) {
++ if (get_number(buf, len, &ch, next, MAX_CHANNELS - 1))
++ return -EINVAL;
++ channels[ch] = 1;
++ next = ch + 1;
++ if (!*len)
++ break;
++ if (**buf == ',') {
++ (*buf)++;
++ (*len)--;
++ continue;
++ }
++ if (**buf != '-')
++ return -EINVAL;
++ (*buf)++;
++ (*len)--;
++ if (get_number(buf, len, &ch, next, MAX_CHANNELS - 1))
++ return -EINVAL;
++ while (next <= ch)
++ channels[next++] = 1;
++ if (!*len)
++ break;
++ if (**buf != ',')
++ return -EINVAL;
++ (*buf)++;
++ (*len)--;
++ }
++ return 1;
++}
++
++static size_t print_channels(struct port *port, char *buf, u8 id)
++{
++ unsigned int ch, cnt = 0;
++ size_t len = 0;
++
++ for (ch = 0; ch < MAX_CHANNELS; ch++)
++ if (port->channels[ch] == id) {
++ if (cnt == 0) {
++ sprintf(buf + len, "%s%u", len ? "," : "", ch);
++ len += strlen(buf + len);
++ }
++ cnt++;
++ } else {
++ if (cnt > 1) {
++ sprintf(buf + len, "-%u", ch - 1);
++ len += strlen(buf + len);
++ }
++ cnt = 0;
++ }
++ if (cnt > 1) {
++ sprintf(buf + len, "-%u", ch - 1);
++ len += strlen(buf + len);
++ }
++
++ buf[len++] = '\n';
++ return len;
++}
++
++static inline unsigned int sub_offset(unsigned int a, unsigned int b,
++ unsigned int modulo)
++{
++ return (modulo /* make sure the result >= 0 */ + a - b) % modulo;
++}
++
++/*****************************************************************************
++ * HSS access
++ ****************************************************************************/
++
++static void hss_config_load(struct port *port)
++{
++ struct msg msg;
++
++ do {
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = PORT_CONFIG_LOAD;
++ msg.hss_port = port->id;
++ if (npe_send_message(port->npe, &msg, "HSS_LOAD_CONFIG"))
++ break;
++ if (npe_recv_message(port->npe, &msg, "HSS_LOAD_CONFIG"))
++ break;
++
++ /* HSS_LOAD_CONFIG for port #1 returns port_id = #4 */
++ if (msg.cmd != PORT_CONFIG_LOAD || msg.data32)
++ break;
++
++ /* HDLC may stop working without this */
++ npe_recv_message(port->npe, &msg, "FLUSH_IT");
++ return;
++ } while (0);
++
++ printk(KERN_CRIT "HSS-%i: unable to reload HSS configuration\n",
++ port->id);
++ BUG();
++}
++
++static void hss_config_set_pcr(struct port *port)
++{
++ struct msg msg;
++
++ do {
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = PORT_CONFIG_WRITE;
++ msg.hss_port = port->id;
++ msg.index = HSS_CONFIG_TX_PCR;
++ msg.data32 = PCR_FRM_SYNC_OUTPUT_RISING | PCR_MSB_ENDIAN |
++ PCR_TX_DATA_ENABLE;
++ if (port->frame_size % 8 == 0)
++ msg.data32 |= PCR_SOF_NO_FBIT;
++ if (port->clock_type == CLOCK_INT)
++ msg.data32 |= PCR_SYNC_CLK_DIR_OUTPUT;
++ if (npe_send_message(port->npe, &msg, "HSS_SET_TX_PCR"))
++ break;
++
++ msg.index = HSS_CONFIG_RX_PCR;
++ msg.data32 ^= PCR_TX_DATA_ENABLE | PCR_DCLK_EDGE_RISING;
++ if (npe_send_message(port->npe, &msg, "HSS_SET_RX_PCR"))
++ break;
++ return;
++ } while (0);
++
++ printk(KERN_CRIT "HSS-%i: unable to set HSS PCR registers\n", port->id);
++ BUG();
++}
++
++static void hss_config_set_hdlc_cfg(struct port *port)
++{
++ struct msg msg;
++
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = PKT_PIPE_HDLC_CFG_WRITE;
++ msg.hss_port = port->id;
++ msg.data8a = port->hdlc_cfg; /* rx_cfg */
++ msg.data8b = port->hdlc_cfg | (PKT_EXTRA_FLAGS << 3); /* tx_cfg */
++ if (npe_send_message(port->npe, &msg, "HSS_SET_HDLC_CFG")) {
++ printk(KERN_CRIT "HSS-%i: unable to set HSS HDLC"
++ " configuration\n", port->id);
++ BUG();
++ }
++}
++
++static void hss_config_set_core(struct port *port)
++{
++ struct msg msg;
++
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = PORT_CONFIG_WRITE;
++ msg.hss_port = port->id;
++ msg.index = HSS_CONFIG_CORE_CR;
++ msg.data32 = (port->loopback ? CCR_LOOPBACK : 0) |
++ (port->id ? CCR_SECOND_HSS : 0);
++ if (npe_send_message(port->npe, &msg, "HSS_SET_CORE_CR")) {
++ printk(KERN_CRIT "HSS-%i: unable to set HSS core control"
++ " register\n", port->id);
++ BUG();
++ }
++}
++
++static void hss_config_set_line(struct port *port)
++{
++ struct msg msg;
++
++ hss_config_set_pcr(port);
++ hss_config_set_core(port);
++
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = PORT_CONFIG_WRITE;
++ msg.hss_port = port->id;
++ msg.index = HSS_CONFIG_CLOCK_CR;
++ msg.data32 = CLK42X_SPEED_2048KHZ /* FIXME */;
++ if (npe_send_message(port->npe, &msg, "HSS_SET_CLOCK_CR")) {
++ printk(KERN_CRIT "HSS-%i: unable to set HSS clock control"
++ " register\n", port->id);
++ BUG();
++ }
++}
++
++static void hss_config_set_rx_frame(struct port *port)
++{
++ struct msg msg;
++
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = PORT_CONFIG_WRITE;
++ msg.hss_port = port->id;
++ msg.index = HSS_CONFIG_RX_FCR;
++ msg.data16a = port->frame_sync_offset;
++ msg.data16b = port->frame_size - 1;
++ if (npe_send_message(port->npe, &msg, "HSS_SET_RX_FCR")) {
++ printk(KERN_CRIT "HSS-%i: unable to set HSS RX frame size"
++ " and offset\n", port->id);
++ BUG();
++ }
++}
++
++static void hss_config_set_frame(struct port *port)
++{
++ struct msg msg;
++
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = PORT_CONFIG_WRITE;
++ msg.hss_port = port->id;
++ msg.index = HSS_CONFIG_TX_FCR;
++ msg.data16a = TX_FRAME_SYNC_OFFSET;
++ msg.data16b = port->frame_size - 1;
++ if (npe_send_message(port->npe, &msg, "HSS_SET_TX_FCR")) {
++ printk(KERN_CRIT "HSS-%i: unable to set HSS TX frame size"
++ " and offset\n", port->id);
++ BUG();
++ }
++ hss_config_set_rx_frame(port);
++}
++
++static void hss_config_set_lut(struct port *port)
++{
++ struct msg msg;
++ int chan_count = 0, log_chan = 0, i, ch;
++ u32 lut[MAX_CHANNELS / 4];
++
++ memset(lut, 0, sizeof(lut));
++ for (i = 0; i < MAX_CHAN_DEVICES; i++)
++ if (port->chan_devices[i])
++ port->chan_devices[i]->chan_count = 0;
++
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = PORT_CONFIG_WRITE;
++ msg.hss_port = port->id;
++
++ for (ch = 0; ch < MAX_CHANNELS; ch++) {
++ struct chan_device *chdev = NULL;
++ unsigned int entry;
++
++ if (port->channels[ch] < MAX_CHAN_DEVICES /* assigned */)
++ chdev = port->chan_devices[port->channels[ch]];
++
++ if (port->mode == MODE_G704 && ch == 0)
++ entry = TDMMAP_VOICE64K; /* PCM-31 pattern */
++ else if (port->mode == MODE_HDLC ||
++ port->channels[ch] == CHANNEL_HDLC)
++ entry = TDMMAP_HDLC;
++ else if (chdev && chdev->open_count) {
++ entry = TDMMAP_VOICE64K;
++ chdev->log_channels[chdev->chan_count++] = log_chan;
++ } else
++ entry = TDMMAP_UNASSIGNED;
++ if (entry == TDMMAP_VOICE64K) {
++ chan_count++;
++ log_chan++;
++ }
++
++ msg.data32 >>= 2;
++ msg.data32 |= entry << 30;
++
++ if (ch % 16 == 15) {
++ msg.index = HSS_CONFIG_TX_LUT + ((ch / 4) & ~3);
++ if (npe_send_message(port->npe, &msg, "HSS_SET_TX_LUT"))
++ break;
++
++ msg.index += HSS_CONFIG_RX_LUT - HSS_CONFIG_TX_LUT;
++ if (npe_send_message(port->npe, &msg, "HSS_SET_RX_LUT"))
++ break;
++ }
++ }
++ if (ch != MAX_CHANNELS) {
++ printk(KERN_CRIT "HSS-%i: unable to set HSS channel look-up"
++ " table\n", port->id);
++ BUG();
++ }
++
++ hss_config_set_frame(port);
++
++ if (!chan_count)
++ return;
++
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = CHAN_NUM_CHANS_WRITE;
++ msg.hss_port = port->id;
++ msg.data8a = chan_count;
++ if (npe_send_message(port->npe, &msg, "CHAN_NUM_CHANS_WRITE")) {
++ printk(KERN_CRIT "HSS-%i: unable to set HSS channel count\n",
++ port->id);
++ BUG();
++ }
++
++ /* don't leak data */
++ // FIXME memset(chan_tx_buf(port), 0, CHAN_TX_FRAMES * chan_count);
++ if (port->mode == MODE_G704) /* G.704 PCM-31 sync pattern */
++ for (i = 0; i < CHAN_TX_FRAMES; i += 4)
++ *(u32*)(chan_tx_buf(port) + i) = 0x9BDF9BDF;
++
++ for (i = 0; i < CHAN_TX_LISTS; i++) {
++ u32 phys = port->chan_tx_buf_phys + i * CHAN_TX_LIST_FRAMES;
++ u32 *list = ((u32 *)chan_tx_lists(port)) + i * chan_count;
++ for (ch = 0; ch < chan_count; ch++)
++ list[ch] = phys + ch * CHAN_TX_FRAMES;
++ }
++ dma_sync_single(port->dev, port->chan_tx_buf_phys,
++ chan_tx_buf_len(port) + chan_tx_lists_len(port),
++ DMA_TO_DEVICE);
++}
++
++static u32 hss_config_get_status(struct port *port)
++{
++ struct msg msg;
++
++ do {
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = PORT_ERROR_READ;
++ msg.hss_port = port->id;
++ if (npe_send_message(port->npe, &msg, "PORT_ERROR_READ"))
++ break;
++ if (npe_recv_message(port->npe, &msg, "PORT_ERROR_READ"))
++ break;
++
++ return msg.data32;
++ } while (0);
++
++ printk(KERN_CRIT "HSS-%i: unable to read HSS status\n", port->id);
++ BUG();
++}
++
++static void hss_config_start_chan(struct port *port)
++{
++ struct msg msg;
++
++ port->chan_last_tx = 0;
++ port->chan_last_rx = 0;
++
++ do {
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = CHAN_RX_BUF_ADDR_WRITE;
++ msg.hss_port = port->id;
++ msg.data32 = port->chan_rx_buf_phys;
++ if (npe_send_message(port->npe, &msg, "CHAN_RX_BUF_ADDR_WRITE"))
++ break;
++
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = CHAN_TX_BUF_ADDR_WRITE;
++ msg.hss_port = port->id;
++ msg.data32 = chan_tx_lists_phys(port);
++ if (npe_send_message(port->npe, &msg, "CHAN_TX_BUF_ADDR_WRITE"))
++ break;
++
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = CHAN_FLOW_ENABLE;
++ msg.hss_port = port->id;
++ if (npe_send_message(port->npe, &msg, "CHAN_FLOW_ENABLE"))
++ break;
++ port->chan_started = 1;
++ return;
++ } while (0);
++
++ printk(KERN_CRIT "HSS-%i: unable to start channelized flow\n",
++ port->id);
++ BUG();
++}
++
++static void hss_config_stop_chan(struct port *port)
++{
++ struct msg msg;
++
++ if (!port->chan_started)
++ return;
++
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = CHAN_FLOW_DISABLE;
++ msg.hss_port = port->id;
++ if (npe_send_message(port->npe, &msg, "CHAN_FLOW_DISABLE")) {
++ printk(KERN_CRIT "HSS-%i: unable to stop channelized flow\n",
++ port->id);
++ BUG();
++ }
++ hss_config_get_status(port); /* make sure it's halted */
++}
++
++static void hss_config_start_hdlc(struct port *port)
++{
++ struct msg msg;
++
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = PKT_PIPE_FLOW_ENABLE;
++ msg.hss_port = port->id;
++ msg.data32 = 0;
++ if (npe_send_message(port->npe, &msg, "HSS_ENABLE_PKT_PIPE")) {
++ printk(KERN_CRIT "HSS-%i: unable to stop packetized flow\n",
++ port->id);
++ BUG();
++ }
++}
++
++static void hss_config_stop_hdlc(struct port *port)
++{
++ struct msg msg;
++
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = PKT_PIPE_FLOW_DISABLE;
++ msg.hss_port = port->id;
++ if (npe_send_message(port->npe, &msg, "HSS_DISABLE_PKT_PIPE")) {
++ printk(KERN_CRIT "HSS-%i: unable to stop packetized flow\n",
++ port->id);
++ BUG();
++ }
++ hss_config_get_status(port); /* make sure it's halted */
++}
++
++static int hss_config_load_firmware(struct port *port)
++{
++ struct msg msg;
++
++ if (port->initialized)
++ return 0;
++
++ if (!npe_running(port->npe)) {
++ int err;
++ if ((err = npe_load_firmware(port->npe, npe_name(port->npe),
++ port->dev)))
++ return err;
++ }
++
++ do {
++ /* HSS main configuration */
++ hss_config_set_line(port);
++
++ hss_config_set_frame(port);
++
++ /* HDLC mode configuration */
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = PKT_NUM_PIPES_WRITE;
++ msg.hss_port = port->id;
++ msg.data8a = PKT_NUM_PIPES;
++ if (npe_send_message(port->npe, &msg, "HSS_SET_PKT_PIPES"))
++ break;
++
++ msg.cmd = PKT_PIPE_FIFO_SIZEW_WRITE;
++ msg.data8a = PKT_PIPE_FIFO_SIZEW;
++ if (npe_send_message(port->npe, &msg, "HSS_SET_PKT_FIFO"))
++ break;
++
++ msg.cmd = PKT_PIPE_MODE_WRITE;
++ msg.data8a = NPE_PKT_MODE_HDLC;
++ /* msg.data8b = inv_mask */
++ /* msg.data8c = or_mask */
++ if (npe_send_message(port->npe, &msg, "HSS_SET_PKT_MODE"))
++ break;
++
++ msg.cmd = PKT_PIPE_RX_SIZE_WRITE;
++ msg.data16a = HDLC_MAX_MRU; /* including CRC */
++ if (npe_send_message(port->npe, &msg, "HSS_SET_PKT_RX_SIZE"))
++ break;
++
++ msg.cmd = PKT_PIPE_IDLE_PATTERN_WRITE;
++ msg.data32 = 0x7F7F7F7F; /* ??? FIXME */
++ if (npe_send_message(port->npe, &msg, "HSS_SET_PKT_IDLE"))
++ break;
++
++ /* Channelized operation settings */
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = CHAN_TX_BLK_CFG_WRITE;
++ msg.hss_port = port->id;
++ msg.data8b = (CHAN_TX_LIST_FRAMES & ~7) / 2;
++ msg.data8a = msg.data8b / 4;
++ msg.data8d = CHAN_TX_LIST_FRAMES - msg.data8b;
++ msg.data8c = msg.data8d / 4;
++ if (npe_send_message(port->npe, &msg, "CHAN_TX_BLK_CFG_WRITE"))
++ break;
++
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = CHAN_RX_BUF_CFG_WRITE;
++ msg.hss_port = port->id;
++ msg.data8a = CHAN_RX_TRIGGER / 8;
++ msg.data8b = CHAN_RX_FRAMES;
++ if (npe_send_message(port->npe, &msg, "CHAN_RX_BUF_CFG_WRITE"))
++ break;
++
++ memset(&msg, 0, sizeof(msg));
++ msg.cmd = CHAN_TX_BUF_SIZE_WRITE;
++ msg.hss_port = port->id;
++ msg.data8a = CHAN_TX_LISTS;
++ if (npe_send_message(port->npe, &msg, "CHAN_TX_BUF_SIZE_WRITE"))
++ break;
++
++ port->initialized = 1;
++ return 0;
++ } while (0);
++
++ printk(KERN_CRIT "HSS-%i: unable to start HSS operation\n", port->id);
++ BUG();
++}
++
++/*****************************************************************************
++ * packetized (HDLC) operation
++ ****************************************************************************/
++
++static inline void debug_pkt(struct net_device *dev, const char *func,
++ u8 *data, int len)
++{
++#if DEBUG_PKT_BYTES
++ int i;
++
++ printk(KERN_DEBUG "%s: %s(%i) ", dev->name, func, len);
++ for (i = 0; i < len; i++) {
++ if (i >= DEBUG_PKT_BYTES)
++ break;
++ printk(KERN_DEBUG "%s%02X", !(i % 4) ? " " : "", data[i]);
++ }
++ printk(KERN_DEBUG "\n");
++#endif
++}
++
++
++static inline void debug_desc(u32 phys, struct desc *desc)
++{
++#if DEBUG_DESC
++ printk(KERN_DEBUG "%X: %X %3X %3X %08X %X %X\n",
++ phys, desc->next, desc->buf_len, desc->pkt_len,
++ desc->data, desc->status, desc->error_count);
++#endif
++}
++
++static inline void debug_queue(unsigned int queue, int is_get, u32 phys)
++{
++#if DEBUG_QUEUES
++ static struct {
++ int queue;
++ char *name;
++ } names[] = {
++ { HSS0_PKT_TX0_QUEUE, "TX#0 " },
++ { HSS0_PKT_TXDONE_QUEUE, "TX-done#0 " },
++ { HSS0_PKT_RX_QUEUE, "RX#0 " },
++ { HSS0_PKT_RXFREE0_QUEUE, "RX-free#0 " },
++ { HSS1_PKT_TX0_QUEUE, "TX#1 " },
++ { HSS1_PKT_TXDONE_QUEUE, "TX-done#1 " },
++ { HSS1_PKT_RX_QUEUE, "RX#1 " },
++ { HSS1_PKT_RXFREE0_QUEUE, "RX-free#1 " },
++ };
++ int i;
++
++ for (i = 0; i < ARRAY_SIZE(names); i++)
++ if (names[i].queue == queue)
++ break;
++
++ printk(KERN_DEBUG "Queue %i %s%s %X\n", queue,
++ i < ARRAY_SIZE(names) ? names[i].name : "",
++ is_get ? "->" : "<-", phys);
++#endif
++}
++
++static inline u32 queue_get_entry(unsigned int queue)
++{
++ u32 phys = qmgr_get_entry(queue);
++ debug_queue(queue, 1, phys);
++ return phys;
++}
++
++static inline int queue_get_desc(unsigned int queue, struct port *port,
++ int is_tx)
++{
++ u32 phys, tab_phys, n_desc;
++ struct desc *tab;
++
++ if (!(phys = queue_get_entry(queue)))
++ return -1;
++
++ BUG_ON(phys & 0x1F);
++ tab_phys = is_tx ? tx_desc_phys(port, 0) : rx_desc_phys(port, 0);
++ tab = is_tx ? tx_desc_ptr(port, 0) : rx_desc_ptr(port, 0);
++ n_desc = (phys - tab_phys) / sizeof(struct desc);
++ BUG_ON(n_desc >= (is_tx ? TX_DESCS : RX_DESCS));
++ debug_desc(phys, &tab[n_desc]);
++ BUG_ON(tab[n_desc].next);
++ return n_desc;
++}
++
++static inline void queue_put_desc(unsigned int queue, u32 phys,
++ struct desc *desc)
++{
++ debug_queue(queue, 0, phys);
++ debug_desc(phys, desc);
++ BUG_ON(phys & 0x1F);
++ qmgr_put_entry(queue, phys);
++ BUG_ON(qmgr_stat_overflow(queue));
++}
++
++
++static inline void dma_unmap_tx(struct port *port, struct desc *desc)
++{
++#ifdef __ARMEB__
++ dma_unmap_single(&port->netdev->dev, desc->data,
++ desc->buf_len, DMA_TO_DEVICE);
++#else
++ dma_unmap_single(&port->netdev->dev, desc->data & ~3,
++ ALIGN((desc->data & 3) + desc->buf_len, 4),
++ DMA_TO_DEVICE);
++#endif
++}
++
++
++static void hss_hdlc_set_carrier(void *pdev, int carrier)
++{
++ struct net_device *netdev = pdev;
++ struct port *port = dev_to_port(netdev);
++ unsigned long flags;
++
++ spin_lock_irqsave(&npe_lock, flags);
++ port->carrier = carrier;
++ if (!port->loopback) {
++ if (carrier)
++ netif_carrier_on(netdev);
++ else
++ netif_carrier_off(netdev);
++ }
++ spin_unlock_irqrestore(&npe_lock, flags);
++}
++
++static void hss_hdlc_rx_irq(void *pdev)
++{
++ struct net_device *dev = pdev;
++ struct port *port = dev_to_port(dev);
++
++#if DEBUG_RX
++ printk(KERN_DEBUG "%s: hss_hdlc_rx_irq\n", dev->name);
++#endif
++ qmgr_disable_irq(queue_ids[port->id].rx);
++ netif_rx_schedule(dev, &port->napi);
++}
++
++static int hss_hdlc_poll(struct napi_struct *napi, int budget)
++{
++ struct port *port = container_of(napi, struct port, napi);
++ struct net_device *dev = port->netdev;
++ unsigned int rxq = queue_ids[port->id].rx;
++ unsigned int rxfreeq = queue_ids[port->id].rxfree;
++ struct net_device_stats *stats = hdlc_stats(dev);
++ int received = 0;
++
++#if DEBUG_RX
++ printk(KERN_DEBUG "%s: hss_hdlc_poll\n", dev->name);
++#endif
++
++ while (received < budget) {
++ struct sk_buff *skb;
++ struct desc *desc;
++ int n;
++#ifdef __ARMEB__
++ struct sk_buff *temp;
++ u32 phys;
++#endif
++
++ if ((n = queue_get_desc(rxq, port, 0)) < 0) {
++ received = 0; /* No packet received */
++#if DEBUG_RX
++ printk(KERN_DEBUG "%s: hss_hdlc_poll"
++ " netif_rx_complete\n", dev->name);
++#endif
++ netif_rx_complete(dev, napi);
++ qmgr_enable_irq(rxq);
++ if (!qmgr_stat_empty(rxq) &&
++ netif_rx_reschedule(dev, napi)) {
++#if DEBUG_RX
++ printk(KERN_DEBUG "%s: hss_hdlc_poll"
++ " netif_rx_reschedule succeeded\n",
++ dev->name);
++#endif
++ qmgr_disable_irq(rxq);
++ continue;
++ }
++#if DEBUG_RX
++ printk(KERN_DEBUG "%s: hss_hdlc_poll all done\n",
++ dev->name);
++#endif
++ return 0; /* all work done */
++ }
++
++ desc = rx_desc_ptr(port, n);
++#if 0 /* FIXME - error_count counts modulo 256, perhaps we should use it */
++ if (desc->error_count)
++ printk(KERN_DEBUG "%s: hss_hdlc_poll status 0x%02X"
++ " errors %u\n", dev->name, desc->status,
++ desc->error_count);
++#endif
++ skb = NULL;
++ switch (desc->status) {
++ case 0:
++#ifdef __ARMEB__
++ if ((skb = netdev_alloc_skb(dev, RX_SIZE)) != NULL) {
++ phys = dma_map_single(&dev->dev, skb->data,
++ RX_SIZE,
++ DMA_FROM_DEVICE);
++ if (dma_mapping_error(phys)) {
++ dev_kfree_skb(skb);
++ skb = NULL;
++ }
++ }
++#else
++ skb = netdev_alloc_skb(dev, desc->pkt_len);
++#endif
++ if (!skb)
++ stats->rx_dropped++;
++ break;
++ case ERR_HDLC_ALIGN:
++ case ERR_HDLC_ABORT:
++ stats->rx_frame_errors++;
++ stats->rx_errors++;
++ break;
++ case ERR_HDLC_FCS:
++ stats->rx_crc_errors++;
++ stats->rx_errors++;
++ break;
++ case ERR_HDLC_TOO_LONG:
++ stats->rx_length_errors++;
++ stats->rx_errors++;
++ break;
++ default: /* FIXME - remove printk */
++ printk(KERN_ERR "%s: hss_hdlc_poll: status 0x%02X"
++ " errors %u\n", dev->name, desc->status,
++ desc->error_count);
++ stats->rx_errors++;
++ }
++
++ if (!skb) {
++ /* put the desc back on RX-ready queue */
++ desc->buf_len = RX_SIZE;
++ desc->pkt_len = desc->status = 0;
++ queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
++ continue;
++ }
++
++ /* process received frame */
++#ifdef __ARMEB__
++ temp = skb;
++ skb = port->rx_buff_tab[n];
++ dma_unmap_single(&dev->dev, desc->data,
++ RX_SIZE, DMA_FROM_DEVICE);
++#else
++ dma_sync_single(&dev->dev, desc->data,
++ RX_SIZE, DMA_FROM_DEVICE);
++ memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n],
++ ALIGN(desc->pkt_len, 4) / 4);
++#endif
++ skb_put(skb, desc->pkt_len);
++
++ debug_pkt(dev, "hss_hdlc_poll", skb->data, skb->len);
++
++ skb->protocol = hdlc_type_trans(skb, dev);
++ dev->last_rx = jiffies;
++ stats->rx_packets++;
++ stats->rx_bytes += skb->len;
++ netif_receive_skb(skb);
++
++ /* put the new buffer on RX-free queue */
++#ifdef __ARMEB__
++ port->rx_buff_tab[n] = temp;
++ desc->data = phys;
++#endif
++ desc->buf_len = RX_SIZE;
++ desc->pkt_len = 0;
++ queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
++ received++;
++ }
++#if DEBUG_RX
++ printk(KERN_DEBUG "hss_hdlc_poll: end, not all work done\n");
++#endif
++ return received; /* not all work done */
++}
++
++
++static void hss_hdlc_txdone_irq(void *pdev)
++{
++ struct net_device *dev = pdev;
++ struct port *port = dev_to_port(dev);
++ struct net_device_stats *stats = hdlc_stats(dev);
++ int n_desc;
++
++#if DEBUG_TX
++ printk(KERN_DEBUG DRV_NAME ": hss_hdlc_txdone_irq\n");
++#endif
++ while ((n_desc = queue_get_desc(queue_ids[port->id].txdone,
++ port, 1)) >= 0) {
++ struct desc *desc;
++ int start;
++
++ desc = tx_desc_ptr(port, n_desc);
++
++ stats->tx_packets++;
++ stats->tx_bytes += desc->pkt_len;
++
++ dma_unmap_tx(port, desc);
++#if DEBUG_TX
++ printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq free %p\n",
++ dev->name, port->tx_buff_tab[n_desc]);
++#endif
++ free_buffer_irq(port->tx_buff_tab[n_desc]);
++ port->tx_buff_tab[n_desc] = NULL;
++
++ start = qmgr_stat_empty(port->plat->txreadyq);
++ queue_put_desc(port->plat->txreadyq,
++ tx_desc_phys(port, n_desc), desc);
++ if (start) {
++#if DEBUG_TX
++ printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq xmit"
++ " ready\n", dev->name);
++#endif
++ netif_wake_queue(dev);
++ }
++ }
++}
++
++static int hss_hdlc_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++ struct port *port = dev_to_port(dev);
++ struct net_device_stats *stats = hdlc_stats(dev);
++ unsigned int txreadyq = port->plat->txreadyq;
++ int len, offset, bytes, n;
++ void *mem;
++ u32 phys;
++ struct desc *desc;
++
++#if DEBUG_TX
++ printk(KERN_DEBUG "%s: hss_hdlc_xmit\n", dev->name);
++#endif
++
++ if (unlikely(skb->len > HDLC_MAX_MRU)) {
++ dev_kfree_skb(skb);
++ stats->tx_errors++;
++ return NETDEV_TX_OK;
++ }
++
++ debug_pkt(dev, "hss_hdlc_xmit", skb->data, skb->len);
++
++ len = skb->len;
++#ifdef __ARMEB__
++ offset = 0; /* no need to keep alignment */
++ bytes = len;
++ mem = skb->data;
++#else
++ offset = (int)skb->data & 3; /* keep 32-bit alignment */
++ bytes = ALIGN(offset + len, 4);
++ if (!(mem = kmalloc(bytes, GFP_ATOMIC))) {
++ dev_kfree_skb(skb);
++ stats->tx_dropped++;
++ return NETDEV_TX_OK;
++ }
++ memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
++ dev_kfree_skb(skb);
++#endif
++
++ phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE);
++ if (dma_mapping_error(phys)) {
++#ifdef __ARMEB__
++ dev_kfree_skb(skb);
++#else
++ kfree(mem);
++#endif
++ stats->tx_dropped++;
++ return NETDEV_TX_OK;
++ }
++
++ n = queue_get_desc(txreadyq, port, 1);
++ BUG_ON(n < 0);
++ desc = tx_desc_ptr(port, n);
++
++#ifdef __ARMEB__
++ port->tx_buff_tab[n] = skb;
++#else
++ port->tx_buff_tab[n] = mem;
++#endif
++ desc->data = phys + offset;
++ desc->buf_len = desc->pkt_len = len;
++
++ wmb();
++ queue_put_desc(queue_ids[port->id].tx, tx_desc_phys(port, n), desc);
++ dev->trans_start = jiffies;
++
++ if (qmgr_stat_empty(txreadyq)) {
++#if DEBUG_TX
++ printk(KERN_DEBUG "%s: hss_hdlc_xmit queue full\n", dev->name);
++#endif
++ netif_stop_queue(dev);
++ /* we could miss TX ready interrupt */
++ if (!qmgr_stat_empty(txreadyq)) {
++#if DEBUG_TX
++ printk(KERN_DEBUG "%s: hss_hdlc_xmit ready again\n",
++ dev->name);
++#endif
++ netif_wake_queue(dev);
++ }
++ }
++
++#if DEBUG_TX
++ printk(KERN_DEBUG "%s: hss_hdlc_xmit end\n", dev->name);
++#endif
++ return NETDEV_TX_OK;
++}
++
++
++static int request_hdlc_queues(struct port *port)
++{
++ int err;
++
++ err = qmgr_request_queue(queue_ids[port->id].rxfree, RX_DESCS, 0, 0);
++ if (err)
++ return err;
++
++ err = qmgr_request_queue(queue_ids[port->id].rx, RX_DESCS, 0, 0);
++ if (err)
++ goto rel_rxfree;
++
++ err = qmgr_request_queue(queue_ids[port->id].tx, TX_DESCS, 0, 0);
++ if (err)
++ goto rel_rx;
++
++ err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0);
++ if (err)
++ goto rel_tx;
++
++ err = qmgr_request_queue(queue_ids[port->id].txdone, TX_DESCS, 0, 0);
++ if (err)
++ goto rel_txready;
++ return 0;
++
++rel_txready:
++ qmgr_release_queue(port->plat->txreadyq);
++rel_tx:
++ qmgr_release_queue(queue_ids[port->id].tx);
++rel_rx:
++ qmgr_release_queue(queue_ids[port->id].rx);
++rel_rxfree:
++ qmgr_release_queue(queue_ids[port->id].rxfree);
++ printk(KERN_DEBUG "%s: unable to request hardware queues\n",
++ port->netdev->name);
++ return err;
++}
++
++static void release_hdlc_queues(struct port *port)
++{
++ qmgr_release_queue(queue_ids[port->id].rxfree);
++ qmgr_release_queue(queue_ids[port->id].rx);
++ qmgr_release_queue(queue_ids[port->id].txdone);
++ qmgr_release_queue(queue_ids[port->id].tx);
++ qmgr_release_queue(port->plat->txreadyq);
++}
++
++static int init_hdlc_queues(struct port *port)
++{
++ int i;
++
++ if (!ports_open)
++ if (!(dma_pool = dma_pool_create(DRV_NAME, NULL,
++ POOL_ALLOC_SIZE, 32, 0)))
++ return -ENOMEM;
++
++ if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL,
++ &port->desc_tab_phys)))
++ return -ENOMEM;
++ memset(port->desc_tab, 0, POOL_ALLOC_SIZE);
++ memset(port->rx_buff_tab, 0, sizeof(port->rx_buff_tab)); /* tables */
++ memset(port->tx_buff_tab, 0, sizeof(port->tx_buff_tab));
++
++ /* Setup RX buffers */
++ for (i = 0; i < RX_DESCS; i++) {
++ struct desc *desc = rx_desc_ptr(port, i);
++ buffer_t *buff;
++ void *data;
++#ifdef __ARMEB__
++ if (!(buff = netdev_alloc_skb(port->netdev, RX_SIZE)))
++ return -ENOMEM;
++ data = buff->data;
++#else
++ if (!(buff = kmalloc(RX_SIZE, GFP_KERNEL)))
++ return -ENOMEM;
++ data = buff;
++#endif
++ desc->buf_len = RX_SIZE;
++ desc->data = dma_map_single(&port->netdev->dev, data,
++ RX_SIZE, DMA_FROM_DEVICE);
++ if (dma_mapping_error(desc->data)) {
++ free_buffer(buff);
++ return -EIO;
++ }
++ port->rx_buff_tab[i] = buff;
++ }
++
++ return 0;
++}
++
++static void destroy_hdlc_queues(struct port *port)
++{
++ int i;
++
++ if (port->desc_tab) {
++ for (i = 0; i < RX_DESCS; i++) {
++ struct desc *desc = rx_desc_ptr(port, i);
++ buffer_t *buff = port->rx_buff_tab[i];
++ if (buff) {
++ dma_unmap_single(&port->netdev->dev,
++ desc->data, RX_SIZE,
++ DMA_FROM_DEVICE);
++ free_buffer(buff);
++ }
++ }
++ for (i = 0; i < TX_DESCS; i++) {
++ struct desc *desc = tx_desc_ptr(port, i);
++ buffer_t *buff = port->tx_buff_tab[i];
++ if (buff) {
++ dma_unmap_tx(port, desc);
++ free_buffer(buff);
++ }
++ }
++ dma_pool_free(dma_pool, port->desc_tab, port->desc_tab_phys);
++ port->desc_tab = NULL;
++ }
++
++ if (!ports_open && dma_pool) {
++ dma_pool_destroy(dma_pool);
++ dma_pool = NULL;
++ }
++}
++
++static int hss_hdlc_open(struct net_device *dev)
++{
++ struct port *port = dev_to_port(dev);
++ unsigned long flags;
++ int i, err = 0;
++
++ if ((err = hdlc_open(dev)))
++ return err;
++
++ if ((err = request_hdlc_queues(port)))
++ goto err_hdlc_close;
++
++ if ((err = init_hdlc_queues(port)))
++ goto err_destroy_queues;
++
++ spin_lock_irqsave(&npe_lock, flags);
++
++ if (port->mode == MODE_G704 && port->channels[0] == CHANNEL_HDLC) {
++ err = -EBUSY; /* channel #0 is used for G.704 framing */
++ goto err_unlock;
++ }
++ if (port->mode != MODE_HDLC)
++ for (i = port->frame_size / 8; i < MAX_CHANNELS; i++)
++ if (port->channels[i] == CHANNEL_HDLC) {
++ err = -ECHRNG; /* frame too short */
++ goto err_unlock;
++ }
++
++ if ((err = hss_config_load_firmware(port)))
++ goto err_unlock;
++
++ if (!port->chan_open_count && port->plat->open)
++ if ((err = port->plat->open(port->id, dev,
++ hss_hdlc_set_carrier)))
++ goto err_unlock;
++
++ if (port->mode == MODE_G704 && !port->chan_open_count)
++ if ((err = hss_prepare_chan(port)))
++ goto err_plat_close;
++
++ spin_unlock_irqrestore(&npe_lock, flags);
++
++ /* Populate queues with buffers, no failure after this point */
++ for (i = 0; i < TX_DESCS; i++)
++ queue_put_desc(port->plat->txreadyq,
++ tx_desc_phys(port, i), tx_desc_ptr(port, i));
++
++ for (i = 0; i < RX_DESCS; i++)
++ queue_put_desc(queue_ids[port->id].rxfree,
++ rx_desc_phys(port, i), rx_desc_ptr(port, i));
++
++ napi_enable(&port->napi);
++ netif_start_queue(dev);
++
++ qmgr_set_irq(queue_ids[port->id].rx, QUEUE_IRQ_SRC_NOT_EMPTY,
++ hss_hdlc_rx_irq, dev);
++
++ qmgr_set_irq(queue_ids[port->id].txdone, QUEUE_IRQ_SRC_NOT_EMPTY,
++ hss_hdlc_txdone_irq, dev);
++ qmgr_enable_irq(queue_ids[port->id].txdone);
++
++ ports_open++;
++ port->hdlc_open = 1;
++
++ hss_config_set_hdlc_cfg(port);
++ hss_config_set_lut(port);
++ hss_config_load(port);
++
++ if (port->mode == MODE_G704 && !port->chan_open_count)
++ hss_config_start_chan(port);
++
++ hss_config_start_hdlc(port);
++
++ /* we may already have RX data, enables IRQ */
++ netif_rx_schedule(dev, &port->napi);
++ return 0;
++
++err_plat_close:
++ if (!port->chan_open_count && port->plat->close)
++ port->plat->close(port->id, dev);
++err_unlock:
++ spin_unlock_irqrestore(&npe_lock, flags);
++err_destroy_queues:
++ destroy_hdlc_queues(port);
++ release_hdlc_queues(port);
++err_hdlc_close:
++ hdlc_close(dev);
++ return err;
++}
++
++static int hss_hdlc_close(struct net_device *dev)
++{
++ struct port *port = dev_to_port(dev);
++ unsigned long flags;
++ int i, buffs = RX_DESCS; /* allocated RX buffers */
++
++ spin_lock_irqsave(&npe_lock, flags);
++ ports_open--;
++ port->hdlc_open = 0;
++ qmgr_disable_irq(queue_ids[port->id].rx);
++ netif_stop_queue(dev);
++ napi_disable(&port->napi);
++
++ hss_config_stop_hdlc(port);
++
++ if (port->mode == MODE_G704 && !port->chan_open_count)
++ hss_chan_stop(port);
++
++ while (queue_get_desc(queue_ids[port->id].rxfree, port, 0) >= 0)
++ buffs--;
++ while (queue_get_desc(queue_ids[port->id].rx, port, 0) >= 0)
++ buffs--;
++
++ if (buffs)
++ printk(KERN_CRIT "%s: unable to drain RX queue, %i buffer(s)"
++ " left in NPE\n", dev->name, buffs);
++
++ buffs = TX_DESCS;
++ while (queue_get_desc(queue_ids[port->id].tx, port, 1) >= 0)
++ buffs--; /* cancel TX */
++
++ i = 0;
++ do {
++ while (queue_get_desc(port->plat->txreadyq, port, 1) >= 0)
++ buffs--;
++ if (!buffs)
++ break;
++ } while (++i < MAX_CLOSE_WAIT);
++
++ if (buffs)
++ printk(KERN_CRIT "%s: unable to drain TX queue, %i buffer(s) "
++ "left in NPE\n", dev->name, buffs);
++#if DEBUG_CLOSE
++ if (!buffs)
++ printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i);
++#endif
++ qmgr_disable_irq(queue_ids[port->id].txdone);
++
++ if (!port->chan_open_count && port->plat->close)
++ port->plat->close(port->id, dev);
++ spin_unlock_irqrestore(&npe_lock, flags);
++
++ destroy_hdlc_queues(port);
++ release_hdlc_queues(port);
++ hdlc_close(dev);
++ return 0;
++}
++
++
++static int hss_hdlc_attach(struct net_device *dev, unsigned short encoding,
++ unsigned short parity)
++{
++ struct port *port = dev_to_port(dev);
++
++ if (encoding != ENCODING_NRZ)
++ return -EINVAL;
++
++ switch(parity) {
++ case PARITY_CRC16_PR1_CCITT:
++ port->hdlc_cfg = 0;
++ return 0;
++
++ case PARITY_CRC32_PR1_CCITT:
++ port->hdlc_cfg = PKT_HDLC_CRC_32;
++ return 0;
++
++ default:
++ return -EINVAL;
++ }
++}
++
++
++static int hss_hdlc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
++{
++ const size_t size = sizeof(sync_serial_settings);
++ sync_serial_settings new_line;
++ sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
++ struct port *port = dev_to_port(dev);
++ unsigned long flags;
++ int i, clk;
++
++ if (cmd != SIOCWANDEV)
++ return hdlc_ioctl(dev, ifr, cmd);
++
++ switch(ifr->ifr_settings.type) {
++ case IF_GET_IFACE:
++ ifr->ifr_settings.type = IF_IFACE_V35;
++ if (ifr->ifr_settings.size < size) {
++ ifr->ifr_settings.size = size; /* data size wanted */
++ return -ENOBUFS;
++ }
++ memset(&new_line, 0, sizeof(new_line));
++ new_line.clock_type = port->clock_type;
++ new_line.clock_rate = port->clock_rate;
++ new_line.loopback = port->loopback;
++ if (copy_to_user(line, &new_line, size))
++ return -EFAULT;
++
++ if (!port->chan_buf)
++ return 0;
++
++ dma_sync_single(&dev->dev, port->chan_rx_buf_phys,
++ chan_rx_buf_len(port), DMA_FROM_DEVICE);
++ printk(KERN_DEBUG "RX:\n");
++ for (i = 0; i < chan_rx_buf_len(port); i++) {
++ if (i % 32 == 0)
++ printk(KERN_DEBUG "%03X ", i);
++ printk("%02X%c", chan_rx_buf(port)[i],
++ (i + 1) % 32 ? ' ' : '\n');
++ }
++
++#if 0
++ printk(KERN_DEBUG "TX:\n");
++ for (i = 0; i < /*CHAN_TX_FRAMES * 2*/ chan_tx_buf_len(port)
++ + chan_tx_lists_len(port); i++) {
++ if (i % 32 == 0)
++ printk(KERN_DEBUG "%03X ", i);
++ printk("%02X%c", chan_tx_buf(port)[i],
++ (i + 1) % 32 ? ' ' : '\n');
++ }
++#endif
++ port->msg_count = 10;
++ return 0;
++
++ case IF_IFACE_SYNC_SERIAL:
++ case IF_IFACE_V35:
++ if(!capable(CAP_NET_ADMIN))
++ return -EPERM;
++ if (copy_from_user(&new_line, line, size))
++ return -EFAULT;
++
++ clk = new_line.clock_type;
++ if (port->plat->set_clock)
++ clk = port->plat->set_clock(port->id, clk);
++
++ if (clk != CLOCK_EXT && clk != CLOCK_INT)
++ return -EINVAL; /* No such clock setting */
++
++ if (new_line.loopback != 0 && new_line.loopback != 1)
++ return -EINVAL;
++
++ port->clock_type = clk; /* Update settings */
++ /* FIXME port->clock_rate = new_line.clock_rate */;
++ port->loopback = new_line.loopback;
++
++ spin_lock_irqsave(&npe_lock, flags);
++
++ if (port->chan_open_count || port->hdlc_open) {
++ hss_config_set_line(port);
++ hss_config_load(port);
++ }
++ if (port->loopback || port->carrier)
++ netif_carrier_on(port->netdev);
++ else
++ netif_carrier_off(port->netdev);
++ spin_unlock_irqrestore(&npe_lock, flags);
++
++ return 0;
++
++ default:
++ return hdlc_ioctl(dev, ifr, cmd);
++ }
++}
++
++/*****************************************************************************
++ * channelized (G.704) operation
++ ****************************************************************************/
++
++static void g704_rx_framer(struct port *port, unsigned int offset)
++{
++ u8 *data = chan_rx_buf(port) + sub_offset(offset, CHAN_RX_TRIGGER,
++ CHAN_RX_FRAMES);
++ unsigned int bit, frame, bad_even = 0, bad_odd = 0, cnt;
++ unsigned int is_first = port->just_set_offset;
++ u8 zeros_even, zeros_odd, ones_even, ones_odd;
++ enum alignment aligned;
++
++ port->just_set_offset = 0;
++ dma_sync_single(port->dev, port->chan_rx_buf_phys, CHAN_RX_FRAMES,
++ DMA_FROM_DEVICE);
++
++ /* check if aligned first */
++ for (frame = 0; frame < CHAN_RX_TRIGGER &&
++ (bad_even <= MAX_CHAN_RX_BAD_SYNC ||
++ bad_odd <= MAX_CHAN_RX_BAD_SYNC); frame += 2) {
++ u8 ve = data[frame];
++ u8 vo = data[frame + 1];
++
++ if ((ve & 0x7F) != 0x1B || !(vo & 0x40))
++ bad_even++;
++
++ if ((vo & 0x7F) != 0x1B || !(ve & 0x40))
++ bad_odd++;
++ }
++
++ if (bad_even <= MAX_CHAN_RX_BAD_SYNC)
++ aligned = EVEN_FIRST;
++ else if (bad_odd <= MAX_CHAN_RX_BAD_SYNC)
++ aligned = ODD_FIRST;
++ else
++ aligned = NOT_ALIGNED;
++
++ if (aligned != NOT_ALIGNED) {
++ if (aligned == port->aligned)
++ return; /* no change */
++ if (printk_ratelimit())
++ printk(KERN_INFO "HSS-%i: synchronized at %u (%s frame"
++ " first)\n", port->id, port->frame_sync_offset,
++ aligned == EVEN_FIRST ? "even" : "odd");
++ port->aligned = aligned;
++
++ atomic_inc(&port->chan_tx_irq_number);
++ wake_up_interruptible(&port->chan_tx_waitq);
++ atomic_inc(&port->chan_rx_irq_number);
++ wake_up_interruptible(&port->chan_rx_waitq);
++ return;
++ }
++
++ /* not aligned */
++ if (port->aligned != NOT_ALIGNED && printk_ratelimit()) {
++ printk(KERN_INFO "HSS-%i: lost alignment\n", port->id);
++ port->aligned = NOT_ALIGNED;
++#if DEBUG_FRAMER
++ for (cnt = 0; cnt < CHAN_RX_FRAMES; cnt++)
++ printk("%c%02X%s", cnt == offset ? '>' : ' ',
++ chan_rx_buf(port)[cnt],
++ (cnt + 1) % 32 ? "" : "\n");
++#endif
++
++ for (cnt = 0; cnt < MAX_CHAN_DEVICES; cnt++)
++ if (port->chan_devices[cnt]) {
++ set_bit(TX_ERROR_BIT, &port->chan_devices[cnt]
++ ->errors_bitmap);
++ set_bit(RX_ERROR_BIT, &port->chan_devices[cnt]
++ ->errors_bitmap);
++ }
++ atomic_inc(&port->chan_tx_irq_number);
++ wake_up_interruptible(&port->chan_tx_waitq);
++ atomic_inc(&port->chan_rx_irq_number);
++ wake_up_interruptible(&port->chan_rx_waitq);
++ }
++
++ if (is_first)
++ return;
++
++ zeros_even = zeros_odd = 0;
++ ones_even = ones_odd = 0xFF;
++ for (frame = 0; frame < CHAN_RX_TRIGGER; frame += 2) {
++ zeros_even |= data[frame];
++ zeros_odd |= data[frame + 1];
++ ones_even &= data[frame];
++ ones_odd &= data[frame + 1];
++ }
++
++ for (bit = 0; bit < 7; bit++) {
++ if ((zeros_even & ~0x9B) == 0 && (ones_even & 0x1B) == 0x1B &&
++ (ones_odd & 0x40) == 0x40) {
++ aligned = EVEN_FIRST; /* maybe */
++ break;
++ }
++ if ((zeros_odd & ~0x9B) == 0 && (ones_odd & 0x1B) == 0x1B &&
++ (ones_even & 0x40) == 0x40) {
++ aligned = ODD_FIRST; /* maybe */
++ break;
++ }
++ zeros_even <<= 1;
++ ones_even = ones_even << 1 | 1;
++ zeros_odd <<= 1;
++ ones_odd = ones_odd << 1 | 1;
++ }
++
++ port->frame_sync_offset += port->frame_size - bit;
++ port->frame_sync_offset %= port->frame_size;
++ port->just_set_offset = 1;
++
++#if DEBUG_FRAMER
++ if (bit == 7)
++ printk(KERN_DEBUG "HSS-%i: trying frame sync at %u\n",
++ port->id, port->frame_sync_offset);
++ else
++ printk(KERN_DEBUG "HSS-%i: found possible frame sync pattern at"
++ " %u (%s frame first)\n", port->id,
++ port->frame_sync_offset,
++ aligned == EVEN_FIRST ? "even" : "odd");
++#endif
++
++ hss_config_set_rx_frame(port);
++ hss_config_load(port);
++}
++
++static void chan_process_tx_irq(struct chan_device *chan_dev, int offset)
++{
++ /* in bytes */
++ unsigned int buff_len = CHAN_TX_FRAMES * chan_dev->chan_count;
++ unsigned int list_len = CHAN_TX_LIST_FRAMES * chan_dev->chan_count;
++ int eaten, last_offset = chan_dev->port->chan_last_tx * list_len;
++
++ offset *= list_len;
++ eaten = sub_offset(offset, last_offset, buff_len);
++
++ if (chan_dev->tx_count > eaten + 2 * list_len) {
++ /* two pages must be reserved for the transmitter */
++ chan_dev->tx_first += eaten;
++ chan_dev->tx_first %= buff_len;
++ chan_dev->tx_count -= eaten;
++ } else {
++ /* FIXME check
++ 0
++ 1 tx_first (may still be transmited)
++ 2 tx_offset (currently reported by the NPE)
++ 3 tx_first + 2 * list_len (free to write here)
++ 4
++ 5
++ */
++
++ /* printk(KERN_DEBUG "TX buffer underflow\n"); */
++ chan_dev->tx_first = sub_offset(offset, list_len, buff_len);
++ chan_dev->tx_count = 2 * list_len; /* reserve */
++ set_bit(TX_ERROR_BIT, &chan_dev->errors_bitmap);
++ }
++}
++
++static void chan_process_rx_irq(struct chan_device *chan_dev, int offset)
++{
++ /* in bytes */
++ unsigned int buff_len = CHAN_RX_FRAMES * chan_dev->chan_count;
++ unsigned int trig_len = CHAN_RX_TRIGGER * chan_dev->chan_count;
++ int last_offset = chan_dev->port->chan_last_rx * chan_dev->chan_count;
++
++ offset *= chan_dev->chan_count;
++ chan_dev->rx_count += sub_offset(offset, last_offset + trig_len,
++ buff_len) + trig_len;
++ if (chan_dev->rx_count > buff_len - 2 * trig_len) {
++ /* two pages - offset[0] and offset[1] are lost - FIXME check */
++ /* printk(KERN_DEBUG "RX buffer overflow\n"); */
++ chan_dev->rx_first = (offset + 2 * trig_len) % buff_len;
++ chan_dev->rx_count = buff_len - 2 * trig_len;
++ set_bit(RX_ERROR_BIT, &chan_dev->errors_bitmap);
++ }
++}
++
++static void hss_chan_irq(void *pdev)
++{
++ struct port *port = pdev;
++ u32 v;
++
++#if DEBUG_RX
++ printk(KERN_DEBUG DRV_NAME ": hss_chan_irq\n");
++#endif
++ spin_lock(&npe_lock);
++ while ((v = qmgr_get_entry(queue_ids[port->id].chan))) {
++ unsigned int first, errors, tx_list, rx_frame;
++ int i, bad;
++
++ first = v >> 24;
++ errors = (v >> 16) & 0xFF;
++ tx_list = (v >> 8) & 0xFF;
++ rx_frame = v & 0xFF;
++
++ if (port->msg_count) {
++ printk(KERN_DEBUG "chan_irq hss %i jiffies %lu first"
++ " 0x%02X errors 0x%02X tx_list 0x%02X rx_frame"
++ " 0x%02X\n", port->id, jiffies, first, errors,
++ tx_list, rx_frame);
++ port->msg_count--;
++ }
++
++ BUG_ON(rx_frame % CHAN_RX_TRIGGER);
++ BUG_ON(rx_frame >= CHAN_RX_FRAMES);
++ BUG_ON(tx_list >= CHAN_TX_LISTS);
++
++ bad = port->mode == MODE_G704 && port->aligned == NOT_ALIGNED;
++ if (!bad && tx_list != port->chan_last_tx) {
++ if (tx_list != (port->chan_last_tx + 1) % CHAN_TX_LISTS)
++ printk(KERN_DEBUG "Skipped an IRQ? Tx last %i"
++ " current %i\n", port->chan_last_tx,
++ tx_list);
++ for (i = 0; i < MAX_CHAN_DEVICES; i++) {
++ if (!port->chan_devices[i] ||
++ !port->chan_devices[i]->open_count)
++ continue;
++ chan_process_tx_irq(port->chan_devices[i],
++ tx_list);
++ }
++ atomic_inc(&port->chan_tx_irq_number);
++#if 0
++ printk(KERN_DEBUG "wakeing up TX jiff %lu\n",
++ jiffies, errors);
++#endif
++ wake_up_interruptible(&port->chan_tx_waitq);
++ }
++
++ if (rx_frame != (port->chan_last_rx + CHAN_RX_TRIGGER) %
++ CHAN_RX_FRAMES)
++ printk(KERN_DEBUG "Skipped an IRQ? Rx last %i"
++ " current %i\n", port->chan_last_rx, rx_frame);
++
++ if (port->mode == MODE_G704)
++ g704_rx_framer(port, rx_frame);
++
++ if (!bad &&
++ (port->mode != MODE_G704 || port->aligned != NOT_ALIGNED)) {
++ for (i = 0; i < MAX_CHAN_DEVICES; i++) {
++ if (!port->chan_devices[i] ||
++ !port->chan_devices[i]->open_count)
++ continue;
++ chan_process_rx_irq(port->chan_devices[i],
++ rx_frame);
++ }
++ atomic_inc(&port->chan_rx_irq_number);
++ wake_up_interruptible(&port->chan_rx_waitq);
++ }
++ port->chan_last_tx = tx_list;
++ port->chan_last_rx = rx_frame;
++ }
++ spin_unlock(&npe_lock);
++}
++
++
++static int hss_prepare_chan(struct port *port)
++{
++ int err;
++
++ if ((err = hss_config_load_firmware(port)))
++ return err;
++
++ if ((err = qmgr_request_queue(queue_ids[port->id].chan,
++ CHAN_QUEUE_LEN, 0, 0)))
++ return err;
++
++ if (!(port->chan_buf = kmalloc(chan_tx_buf_len(port) +
++ chan_tx_lists_len(port) +
++ chan_rx_buf_len(port), GFP_KERNEL))) {
++ goto release_queue;
++ err = -ENOBUFS;
++ }
++
++ port->chan_tx_buf_phys = dma_map_single(port->dev, chan_tx_buf(port),
++ chan_tx_buf_len(port) +
++ chan_tx_lists_len(port),
++ DMA_TO_DEVICE);
++ if (dma_mapping_error(port->chan_tx_buf_phys)) {
++ err = -EIO;
++ goto free;
++ }
++
++ port->chan_rx_buf_phys = dma_map_single(port->dev, chan_rx_buf(port),
++ chan_rx_buf_len(port),
++ DMA_FROM_DEVICE);
++ if (dma_mapping_error(port->chan_rx_buf_phys)) {
++ err = -EIO;
++ goto unmap_tx;
++ }
++
++ qmgr_set_irq(queue_ids[port->id].chan, QUEUE_IRQ_SRC_NOT_EMPTY,
++ hss_chan_irq, port);
++ qmgr_enable_irq(queue_ids[port->id].chan);
++ hss_chan_irq(port);
++ return 0;
++
++unmap_tx:
++ dma_unmap_single(port->dev, port->chan_tx_buf_phys,
++ chan_tx_buf_len(port) + chan_tx_lists_len(port),
++ DMA_TO_DEVICE);
++free:
++ kfree(port->chan_buf);
++ port->chan_buf = NULL;
++release_queue:
++ qmgr_release_queue(queue_ids[port->id].chan);
++ return err;
++}
++
++void hss_chan_stop(struct port *port)
++{
++ if (!port->chan_open_count && !port->hdlc_open)
++ qmgr_disable_irq(queue_ids[port->id].chan);
++
++ hss_config_stop_chan(port);
++ hss_config_set_lut(port);
++ hss_config_load(port);
++
++ if (!port->chan_open_count && !port->hdlc_open) {
++ dma_unmap_single(port->dev, port->chan_tx_buf_phys,
++ chan_tx_buf_len(port) +
++ chan_tx_lists_len(port), DMA_TO_DEVICE);
++ dma_unmap_single(port->dev, port->chan_rx_buf_phys,
++ chan_rx_buf_len(port), DMA_FROM_DEVICE);
++ kfree(port->chan_buf);
++ port->chan_buf = NULL;
++ qmgr_release_queue(queue_ids[port->id].chan);
++ }
++}
++
++static int hss_chan_open(struct inode *inode, struct file *file)
++{
++ struct chan_device *chan_dev = inode_to_chan_dev(inode);
++ struct port *port = chan_dev->port;
++ unsigned long flags;
++ int i, err = 0;
++
++ spin_lock_irqsave(&npe_lock, flags);
++
++ if (chan_dev->open_count) {
++ if (chan_dev->excl_open || (file->f_flags & O_EXCL))
++ err = -EBUSY;
++ else
++ chan_dev->open_count++;
++ goto out;
++ }
++
++ if (port->mode == MODE_HDLC) {
++ err = -ENOSYS;
++ goto out;
++ }
++
++ if (port->mode == MODE_G704 && port->channels[0] == chan_dev->id) {
++ err = -EBUSY; /* channel #0 is used for G.704 signaling */
++ goto out;
++ }
++ for (i = MAX_CHANNELS; i > port->frame_size / 8; i--)
++ if (port->channels[i - 1] == chan_dev->id) {
++ err = -ECHRNG; /* frame too short */
++ goto out;
++ }
++
++ chan_dev->rx_first = chan_dev->tx_first = 0;
++ chan_dev->rx_count = chan_dev->tx_count = 0;
++ clear_bit(TX_ERROR_BIT, &chan_dev->errors_bitmap);
++ clear_bit(RX_ERROR_BIT, &chan_dev->errors_bitmap);
++
++ if (!port->chan_open_count && !port->hdlc_open) {
++ if (port->plat->open)
++ if ((err = port->plat->open(port->id, port->netdev,
++ hss_hdlc_set_carrier)))
++ goto out;
++ if ((err = hss_prepare_chan(port))) {
++ if (port->plat->close)
++ port->plat->close(port->id, port->netdev);
++ goto out;
++ }
++ }
++
++ hss_config_stop_chan(port);
++ chan_dev->open_count++;
++ port->chan_open_count++;
++ chan_dev->excl_open = !!file->f_flags & O_EXCL;
++
++ hss_config_set_lut(port);
++ hss_config_load(port);
++ hss_config_start_chan(port);
++out:
++ spin_unlock_irqrestore(&npe_lock, flags);
++ return err;
++}
++
++static int hss_chan_release(struct inode *inode, struct file *file)
++{
++ struct chan_device *chan_dev = inode_to_chan_dev(inode);
++ struct port *port = chan_dev->port;
++ unsigned long flags;
++
++ spin_lock_irqsave(&npe_lock, flags);
++
++ if (!--chan_dev->open_count) {
++ if (!--port->chan_open_count && !port->hdlc_open) {
++ hss_chan_stop(port);
++ if (port->plat->close)
++ port->plat->close(port->id, port->netdev);
++ } else {
++ hss_config_stop_chan(port);
++ hss_config_set_lut(port);
++ hss_config_set_line(port); //
++ hss_config_start_chan(port);
++ }
++ }
++
++ spin_unlock_irqrestore(&npe_lock, flags);
++ return 0;
++}
++
++static ssize_t hss_chan_read(struct file *file, char __user *buf, size_t count,
++ loff_t *f_pos)
++{
++ struct chan_device *chan_dev = inode_to_chan_dev
++ (file->f_path.dentry->d_inode);
++ struct port *port = chan_dev->port;
++ unsigned long flags;
++ u8 *rx_buf;
++ int res = 0, loops = 0;
++
++ spin_lock_irqsave(&npe_lock, flags);
++
++ while (1) {
++ int prev_irq = atomic_read(&port->chan_rx_irq_number);
++#if 0
++ if (test_and_clear_bit(RX_ERROR_BIT, &chan_dev->errors_bitmap)
++ || (port->mode == G704 && port->aligned == NOT_ALIGNED)) {
++ res = -EIO;
++ goto out;
++ }
++#endif
++ if (count == 0)
++ goto out; /* no need to wait */
++
++ if (chan_dev->rx_count)
++ break;
++
++ spin_unlock_irqrestore(&npe_lock, flags);
++ loops++;
++ if ((res = wait_event_interruptible
++ (port->chan_rx_waitq,
++ atomic_read(&port->chan_rx_irq_number) != prev_irq)))
++ goto out;
++ spin_lock_irqsave(&npe_lock, flags);
++ continue;
++ }
++
++ dma_sync_single(port->dev, port->chan_rx_buf_phys,
++ chan_rx_buf_len(port), DMA_FROM_DEVICE);
++
++#if 0
++ if (loops > 1)
++ printk(KERN_DEBUG "ENTRY rx_first %u rx_count %u count %i"
++ " last_rx %u loops %i\n", chan_dev->rx_first,
++ chan_dev->rx_count, count, port->chan_last_rx, loops);
++#endif
++ rx_buf = chan_rx_buf(port);
++ while (chan_dev->rx_count > 0 && res < count) {
++ unsigned int chan = chan_dev->rx_first % chan_dev->chan_count;
++ unsigned int frame = chan_dev->rx_first / chan_dev->chan_count;
++
++ chan = chan_dev->log_channels[chan];
++ if (put_user(rx_buf[chan * CHAN_RX_FRAMES + frame], buf++)) {
++ res = -EFAULT;
++ goto out;
++ }
++ chan_dev->rx_first++;
++ chan_dev->rx_first %= CHAN_RX_FRAMES * chan_dev->chan_count;
++ chan_dev->rx_count--;
++ res++;
++ }
++out:
++#if 0
++ printk(KERN_DEBUG "EXIT rx_first %u rx_count %u res %i\n",
++ chan_dev->rx_first, chan_dev->rx_count, res);
++#endif
++ spin_unlock_irqrestore(&npe_lock, flags);
++ return res;
++}
++
++static ssize_t hss_chan_write(struct file *file, const char __user *buf,
++ size_t count, loff_t *f_pos)
++{
++ struct chan_device *chan_dev = inode_to_chan_dev
++ (file->f_path.dentry->d_inode);
++ struct port *port = chan_dev->port;
++ unsigned long flags;
++ u8 *tx_buf;
++ int res = 0, loops = 0;
++
++ spin_lock_irqsave(&npe_lock, flags);
++ while (1) {
++ int prev_irq = atomic_read(&port->chan_tx_irq_number);
++#if 0
++ if (test_and_clear_bit(TX_ERROR_BIT, &chan_dev->errors_bitmap)
++ || (port->mode == G704 && port->aligned == NOT_ALIGNED)) {
++ res = -EIO;
++ goto out;
++ }
++#endif
++ if (count == 0)
++ goto out; /* no need to wait */
++
++ if (chan_dev->tx_count < CHAN_TX_FRAMES * chan_dev->chan_count)
++ break;
++
++ spin_unlock_irqrestore(&npe_lock, flags);
++ loops++;
++ if ((res = wait_event_interruptible
++ (port->chan_tx_waitq,
++ atomic_read (&port->chan_tx_irq_number) != prev_irq)))
++ goto out;
++ spin_lock_irqsave(&npe_lock, flags);
++ continue;
++ }
++
++#if 0
++ if (loops > 1)
++ printk(KERN_DEBUG "ENTRY TX_first %u tx_count %u count %i"
++ " last_tx %u loops %i\n", chan_dev->tx_first,
++ chan_dev->tx_count, count, port->chan_last_tx, loops);
++#endif
++ tx_buf = chan_tx_buf(port);
++ while (chan_dev->tx_count < CHAN_TX_FRAMES * chan_dev->chan_count &&
++ res < count) {
++ unsigned int tail, chan, frame;
++
++ tail = (chan_dev->tx_first + chan_dev->tx_count) %
++ (CHAN_TX_FRAMES * chan_dev->chan_count);
++ chan = tail % chan_dev->chan_count;
++ frame = tail / chan_dev->chan_count;
++ chan = chan_dev->log_channels[chan];
++
++ if (get_user(tx_buf[chan * CHAN_TX_FRAMES + frame], buf++)) {
++ printk(KERN_DEBUG "BUG? TX %u %u %u\n",
++ tail, chan, frame);
++ res = -EFAULT;
++ goto out_sync;
++ }
++ chan_dev->tx_count++;
++ res++;
++ }
++out_sync:
++ dma_sync_single(port->dev, port->chan_tx_buf_phys,
++ chan_tx_buf_len(port), DMA_TO_DEVICE);
++out:
++#if 0
++ printk(KERN_DEBUG "EXIT TX_first %u tx_count %u res %i\n",
++ chan_dev->tx_first, chan_dev->tx_count, res);
++#endif
++ spin_unlock_irqrestore(&npe_lock, flags);
++ return res;
++}
++
++
++static unsigned int hss_chan_poll(struct file *file, poll_table *wait)
++{
++ struct chan_device *chan_dev = inode_to_chan_dev
++ (file->f_path.dentry->d_inode);
++ struct port *port = chan_dev->port;
++ unsigned long flags;
++ unsigned int mask = 0;
++
++ spin_lock_irqsave(&npe_lock, flags);
++ poll_wait(file, &port->chan_tx_waitq, wait);
++ poll_wait(file, &port->chan_rx_waitq, wait);
++
++ if (chan_dev->tx_count < CHAN_TX_FRAMES * chan_dev->chan_count)
++ mask |= POLLOUT | POLLWRNORM;
++ if (chan_dev->rx_count)
++ mask |= POLLIN | POLLRDNORM;
++ spin_unlock_irqrestore(&npe_lock, flags);
++ return mask;
++}
++
++/*****************************************************************************
++ * channelized device sysfs attributes
++ ****************************************************************************/
++
++static ssize_t chan_show_chan(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ struct chan_device *chan_dev = dev_get_drvdata(dev);
++
++ return print_channels(chan_dev->port, buf, chan_dev->id);
++}
++
++static ssize_t chan_set_chan(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t len)
++{
++ struct chan_device *chan_dev = dev_get_drvdata(dev);
++ struct port *port = chan_dev->port;
++ unsigned long flags;
++ unsigned int ch;
++ size_t orig_len = len;
++ int err;
++
++ if (len && buf[len - 1] == '\n')
++ len--;
++
++ if (len != 7 || memcmp(buf, "destroy", 7))
++ return -EINVAL;
++
++ spin_lock_irqsave(&npe_lock, flags);
++ cdev_del(&chan_dev->cdev);
++
++ for (ch = 0; ch < MAX_CHANNELS; ch++)
++ if (port->channels[ch] == chan_dev->id)
++ port->channels[ch] = CHANNEL_UNUSED;
++ port->chan_devices[chan_dev->id] = NULL;
++ kfree(chan_dev);
++ spin_unlock_irqrestore(&npe_lock, flags);
++
++ if ((err = device_schedule_callback(dev, device_unregister)))
++ return err;
++ return orig_len;
++}
++
++static struct device_attribute chan_attr =
++ __ATTR(channels, 0644, chan_show_chan, chan_set_chan);
++
++/*****************************************************************************
++ * main sysfs attributes
++ ****************************************************************************/
++
++static const struct file_operations chan_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .read = hss_chan_read,
++ .write = hss_chan_write,
++ .poll = hss_chan_poll,
++ .open = hss_chan_open,
++ .release = hss_chan_release,
++};
++
++static ssize_t create_chan(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t len)
++{
++ struct port *port = dev_get_drvdata(dev);
++ struct chan_device *chan_dev;
++ u8 channels[MAX_CHANNELS];
++ size_t orig_len = len;
++ unsigned long flags;
++ unsigned int ch, id;
++ int minor, err;
++
++ if ((err = parse_channels(&buf, &len, channels)) < 1)
++ return err;
++
++ if (!(chan_dev = kzalloc(sizeof(struct chan_device), GFP_KERNEL)))
++ return -ENOBUFS;
++
++ spin_lock_irqsave(&npe_lock, flags);
++
++ if (port->mode != MODE_RAW && port->mode != MODE_G704) {
++ err = -EINVAL;
++ goto free;
++ }
++
++ for (ch = 0; ch < MAX_CHANNELS; ch++)
++ if (channels[ch] && port->channels[ch] != CHANNEL_UNUSED) {
++ printk(KERN_DEBUG "Channel #%i already in use\n", ch);
++ err = -EBUSY;
++ goto free;
++ }
++
++ for (id = 0; id < MAX_CHAN_DEVICES; id++)
++ if (port->chan_devices[id] == NULL)
++ break;
++
++ if (id == MAX_CHAN_DEVICES) {
++ err = -EBUSY;
++ goto free;
++ }
++
++ for (ch = 0; ch < MAX_CHANNELS; ch++)
++ if (channels[ch])
++ break;
++
++ minor = port->id * MAX_CHAN_DEVICES + ch;
++ chan_dev->id = id;
++ chan_dev->port = port;
++ chan_dev->dev = device_create(hss_class, dev, MKDEV(chan_major, minor),
++ "hss%uch%u", port->id, ch);
++ if (IS_ERR(chan_dev->dev)) {
++ err = PTR_ERR(chan_dev->dev);
++ goto free;
++ }
++
++ cdev_init(&chan_dev->cdev, &chan_fops);
++ chan_dev->cdev.owner = THIS_MODULE;
++ if ((err = cdev_add(&chan_dev->cdev, MKDEV(chan_major, minor), 1)))
++ goto destroy_device;
++
++ for (ch = 0; ch < MAX_CHANNELS; ch++)
++ if (channels[ch])
++ port->channels[ch] = id;
++ port->chan_devices[id] = chan_dev;
++ dev_set_drvdata(chan_dev->dev, chan_dev);
++ BUG_ON(device_create_file(chan_dev->dev, &chan_attr));
++
++ spin_unlock_irqrestore(&npe_lock, flags);
++ return orig_len;
++
++destroy_device:
++ device_unregister(chan_dev->dev);
++free:
++ kfree(chan_dev);
++ spin_unlock_irqrestore(&npe_lock, flags);
++ return err;
++}
++
++static ssize_t show_hdlc_chan(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ return print_channels(dev_get_drvdata(dev), buf, CHANNEL_HDLC);
++}
++
++static ssize_t set_hdlc_chan(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t len)
++{
++ struct port *port = dev_get_drvdata(dev);
++ u8 channels[MAX_CHANNELS];
++ size_t orig_len = len;
++ unsigned long flags;
++ unsigned int ch;
++ int err;
++
++ if ((err = parse_channels(&buf, &len, channels)) < 0)
++ return err;
++
++ spin_lock_irqsave(&npe_lock, flags);
++
++ if (port->mode != MODE_RAW && port->mode != MODE_G704) {
++ err = -EINVAL;
++ goto err;
++ }
++
++ for (ch = 0; ch < MAX_CHANNELS; ch++)
++ if (channels[ch] &&
++ port->channels[ch] != CHANNEL_UNUSED &&
++ port->channels[ch] != CHANNEL_HDLC) {
++ printk(KERN_DEBUG "Channel #%i already in use\n", ch);
++ err = -EBUSY;
++ goto err;
++ }
++
++ for (ch = 0; ch < MAX_CHANNELS; ch++)
++ if (channels[ch])
++ port->channels[ch] = CHANNEL_HDLC;
++ else if (port->channels[ch] == CHANNEL_HDLC)
++ port->channels[ch] = CHANNEL_UNUSED;
++
++ if (port->chan_open_count || port->hdlc_open) {
++ hss_config_set_lut(port);
++ hss_config_load(port);
++ }
++
++ spin_unlock_irqrestore(&npe_lock, flags);
++ return orig_len;
++
++err:
++ spin_unlock_irqrestore(&npe_lock, flags);
++ return err;
++}
++
++static ssize_t show_clock_type(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct port *port = dev_get_drvdata(dev);
++
++ strcpy(buf, port->clock_type == CLOCK_INT ? "int\n" : "ext\n");
++ return 5;
++}
++
++static ssize_t set_clock_type(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t len)
++{
++ struct port *port = dev_get_drvdata(dev);
++ size_t orig_len = len;
++ unsigned long flags;
++ unsigned int clk, err;
++
++ if (len && buf[len - 1] == '\n')
++ len--;
++
++ if (len != 3)
++ return -EINVAL;
++ if (!memcmp(buf, "ext", 3))
++ clk = CLOCK_EXT;
++ else if (!memcmp(buf, "int", 3))
++ clk = CLOCK_INT;
++ else
++ return -EINVAL;
++
++ spin_lock_irqsave(&npe_lock, flags);
++ if (port->plat->set_clock)
++ clk = port->plat->set_clock(port->id, clk);
++ if (clk != CLOCK_EXT && clk != CLOCK_INT) {
++ err = -EINVAL; /* plat->set_clock shouldn't change the state */
++ goto err;
++ }
++ port->clock_type = clk;
++ if (port->chan_open_count || port->hdlc_open) {
++ hss_config_set_line(port);
++ hss_config_load(port);
++ }
++ spin_unlock_irqrestore(&npe_lock, flags);
++
++ return orig_len;
++err:
++ spin_unlock_irqrestore(&npe_lock, flags);
++ return err;
++}
++
++static ssize_t show_clock_rate(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct port *port = dev_get_drvdata(dev);
++
++ sprintf(buf, "%u\n", port->clock_rate);
++ return strlen(buf) + 1;
++}
++
++static ssize_t set_clock_rate(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t len)
++{
++#if 0
++ struct port *port = dev_get_drvdata(dev);
++ size_t orig_len = len;
++ unsigned long flags;
++ unsigned int rate;
++
++ if (len && buf[len - 1] == '\n')
++ len--;
++
++ if (get_number(&buf, &len, &rate, 1, 0xFFFFFFFFu))
++ return -EINVAL;
++ if (len)
++ return -EINVAL;
++
++ spin_lock_irqsave(&npe_lock, flags);
++ port->clock_rate = rate;
++ spin_unlock_irqrestore(&npe_lock, flags);
++ return orig_len;
++#endif
++ return -EINVAL; /* FIXME not yet supported */
++}
++
++static ssize_t show_frame_size(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct port *port = dev_get_drvdata(dev);
++
++ if (port->mode != MODE_RAW && port->mode != MODE_G704)
++ return -EINVAL;
++
++ sprintf(buf, "%u\n", port->frame_size);
++ return strlen(buf) + 1;
++}
++
++static ssize_t set_frame_size(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t len)
++{
++ struct port *port = dev_get_drvdata(dev);
++ size_t ret = len;
++ unsigned long flags;
++ unsigned int size;
++
++ if (len && buf[len - 1] == '\n')
++ len--;
++
++ if (get_number(&buf, &len, &size, MIN_FRAME_SIZE, MAX_FRAME_SIZE))
++ return -EINVAL;
++ if (len || size % 8 > 1)
++ return -EINVAL;
++
++ spin_lock_irqsave(&npe_lock, flags);
++ if (port->mode != MODE_RAW && port->mode != MODE_G704)
++ ret = -EINVAL;
++ else if (!port->chan_open_count && !port->hdlc_open)
++ ret = -EBUSY;
++ else {
++ port->frame_size = size;
++ port->frame_sync_offset = 0;
++ }
++ spin_unlock_irqrestore(&npe_lock, flags);
++ return ret;
++}
++
++static ssize_t show_frame_offset(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct port *port = dev_get_drvdata(dev);
++
++ sprintf(buf, "%u\n", port->frame_sync_offset);
++ return strlen(buf) + 1;
++}
++
++static ssize_t set_frame_offset(struct device *dev,
++ struct device_attribute *attr,
++ const char *buf, size_t len)
++{
++ struct port *port = dev_get_drvdata(dev);
++ size_t orig_len = len;
++ unsigned long flags;
++ unsigned int offset;
++
++ if (len && buf[len - 1] == '\n')
++ len--;
++
++ if (get_number(&buf, &len, &offset, 0, port->frame_size - 1))
++ return -EINVAL;
++ if (len)
++ return -EINVAL;
++
++ spin_lock_irqsave(&npe_lock, flags);
++
++ port->frame_sync_offset = offset;
++ if (port->chan_open_count || port->hdlc_open) {
++ hss_config_set_rx_frame(port);
++ hss_config_load(port);
++ }
++
++ spin_unlock_irqrestore(&npe_lock, flags);
++ return orig_len;
++}
++
++static ssize_t show_loopback(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ struct port *port = dev_get_drvdata(dev);
++
++ sprintf(buf, "%u\n", port->loopback);
++ return strlen(buf) + 1;
++}
++
++static ssize_t set_loopback(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t len)
++{
++ struct port *port = dev_get_drvdata(dev);
++ size_t orig_len = len;
++ unsigned long flags;
++ unsigned int lb;
++
++ if (len && buf[len - 1] == '\n')
++ len--;
++
++ if (get_number(&buf, &len, &lb, 0, 1))
++ return -EINVAL;
++ if (len)
++ return -EINVAL;
++
++ spin_lock_irqsave(&npe_lock, flags);
++
++ if (port->loopback != lb) {
++ port->loopback = lb;
++ if (port->chan_open_count || port->hdlc_open) {
++ hss_config_set_core(port);
++ hss_config_load(port);
++ }
++ if (port->loopback || port->carrier)
++ netif_carrier_on(port->netdev);
++ else
++ netif_carrier_off(port->netdev);
++ }
++
++ spin_unlock_irqrestore(&npe_lock, flags);
++ return orig_len;
++}
++
++static ssize_t show_mode(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ struct port *port = dev_get_drvdata(dev);
++
++ switch(port->mode) {
++ case MODE_RAW:
++ strcpy(buf, "raw\n");
++ break;
++ case MODE_G704:
++ strcpy(buf, "g704\n");
++ break;
++ default:
++ strcpy(buf, "hdlc\n");
++ break;
++ }
++ return strlen(buf) + 1;
++}
++
++static ssize_t set_mode(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t len)
++{
++ struct port *port = dev_get_drvdata(dev);
++ size_t ret = len;
++ unsigned long flags;
++
++ if (len && buf[len - 1] == '\n')
++ len--;
++
++ spin_lock_irqsave(&npe_lock, flags);
++
++ if (port->chan_open_count || port->hdlc_open) {
++ ret = -EBUSY;
++ } else if (len == 4 && !memcmp(buf, "hdlc", 4))
++ port->mode = MODE_HDLC;
++ else if (len == 3 && !memcmp(buf, "raw", 3))
++ port->mode = MODE_RAW;
++ else if (len == 4 && !memcmp(buf, "g704", 4))
++ port->mode = MODE_G704;
++ else
++ ret = -EINVAL;
++
++ spin_unlock_irqrestore(&npe_lock, flags);
++ return ret;
++}
++
++static struct device_attribute hss_attrs[] = {
++ __ATTR(create_chan, 0200, NULL, create_chan),
++ __ATTR(hdlc_chan, 0644, show_hdlc_chan, set_hdlc_chan),
++ __ATTR(clock_type, 0644, show_clock_type, set_clock_type),
++ __ATTR(clock_rate, 0644, show_clock_rate, set_clock_rate),
++ __ATTR(frame_size, 0644, show_frame_size, set_frame_size),
++ __ATTR(frame_offset, 0644, show_frame_offset, set_frame_offset),
++ __ATTR(loopback, 0644, show_loopback, set_loopback),
++ __ATTR(mode, 0644, show_mode, set_mode),
++};
++
++/*****************************************************************************
++ * initialization
++ ****************************************************************************/
++
++static int __devinit hss_init_one(struct platform_device *pdev)
++{
++ struct port *port;
++ struct net_device *dev;
++ hdlc_device *hdlc;
++ int i, err;
++
++ if ((port = kzalloc(sizeof(*port), GFP_KERNEL)) == NULL)
++ return -ENOMEM;
++ platform_set_drvdata(pdev, port);
++ port->id = pdev->id;
++
++ if ((port->npe = npe_request(0)) == NULL) {
++ err = -ENOSYS;
++ goto err_free;
++ }
++
++ port->dev = &pdev->dev;
++ port->plat = pdev->dev.platform_data;
++ if ((port->netdev = dev = alloc_hdlcdev(port)) == NULL) {
++ err = -ENOMEM;
++ goto err_plat;
++ }
++
++ SET_NETDEV_DEV(dev, &pdev->dev);
++ hdlc = dev_to_hdlc(dev);
++ hdlc->attach = hss_hdlc_attach;
++ hdlc->xmit = hss_hdlc_xmit;
++ dev->open = hss_hdlc_open;
++ dev->stop = hss_hdlc_close;
++ dev->do_ioctl = hss_hdlc_ioctl;
++ dev->tx_queue_len = 100;
++ port->clock_type = CLOCK_EXT;
++ port->clock_rate = 2048000;
++ port->frame_size = 256; /* E1 */
++ memset(port->channels, CHANNEL_UNUSED, sizeof(port->channels));
++ init_waitqueue_head(&port->chan_tx_waitq);
++ init_waitqueue_head(&port->chan_rx_waitq);
++ netif_napi_add(dev, &port->napi, hss_hdlc_poll, NAPI_WEIGHT);
++
++ if ((err = register_hdlc_device(dev))) /* HDLC mode by default */
++ goto err_free_netdev;
++
++ for (i = 0; i < ARRAY_SIZE(hss_attrs); i++)
++ BUG_ON(device_create_file(port->dev, &hss_attrs[i]));
++
++ printk(KERN_INFO "%s: HSS-%i\n", dev->name, port->id);
++ return 0;
++
++err_free_netdev:
++ free_netdev(dev);
++err_plat:
++ npe_release(port->npe);
++ platform_set_drvdata(pdev, NULL);
++err_free:
++ kfree(port);
++ return err;
++}
++
++static int __devexit hss_remove_one(struct platform_device *pdev)
++{
++ struct port *port = platform_get_drvdata(pdev);
++ int i;
++
++ for (i = 0; i < ARRAY_SIZE(hss_attrs); i++)
++ device_remove_file(port->dev, &hss_attrs[i]);
++
++ unregister_hdlc_device(port->netdev);
++ free_netdev(port->netdev);
++ npe_release(port->npe);
++ platform_set_drvdata(pdev, NULL);
++ kfree(port);
++ return 0;
++}
++
++static struct platform_driver drv = {
++ .driver.name = DRV_NAME,
++ .probe = hss_init_one,
++ .remove = hss_remove_one,
++};
++
++static int __init hss_init_module(void)
++{
++ int err;
++ dev_t rdev;
++
++ if ((ixp4xx_read_feature_bits() &
++ (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) !=
++ (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS))
++ return -ENOSYS;
++
++ if ((err = alloc_chrdev_region(&rdev, 0, HSS_COUNT * MAX_CHAN_DEVICES,
++ "hss")))
++ return err;
++
++ spin_lock_init(&npe_lock);
++
++ if (IS_ERR(hss_class = class_create(THIS_MODULE, "hss"))) {
++ printk(KERN_ERR "Can't register device class 'hss'\n");
++ err = PTR_ERR(hss_class);
++ goto free_chrdev;
++ }
++ if ((err = platform_driver_register(&drv)))
++ goto destroy_class;
++
++ chan_major = MAJOR(rdev);
++ return 0;
++
++destroy_class:
++ class_destroy(hss_class);
++free_chrdev:
++ unregister_chrdev_region(MKDEV(chan_major, 0),
++ HSS_COUNT * MAX_CHAN_DEVICES);
++ return err;
++}
++
++static void __exit hss_cleanup_module(void)
++{
++ platform_driver_unregister(&drv);
++ class_destroy(hss_class);
++ unregister_chrdev_region(MKDEV(chan_major, 0),
++ HSS_COUNT * MAX_CHAN_DEVICES);
++}
++
++MODULE_AUTHOR("Krzysztof Halasa");
++MODULE_DESCRIPTION("Intel IXP4xx HSS driver");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:ixp4xx_hss");
++module_init(hss_init_module);
++module_exit(hss_cleanup_module);
--- /dev/null
+diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/ixp4xx_npe.c linux-2.6.23-openwrt/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+--- linux-2.6.23/arch/arm/mach-ixp4xx/ixp4xx_npe.c 2007-10-22 22:18:15.000000000 +0200
++++ linux-2.6.23-openwrt/arch/arm/mach-ixp4xx/ixp4xx_npe.c 2007-10-22 22:32:48.000000000 +0200
+@@ -585,6 +585,8 @@
+ npe_reset(npe);
+ #endif
+
++ print_npe(KERN_INFO, npe, "firmware's license can be found in /usr/share/doc/LICENSE.IPL\n");
++
+ print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
+ "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
+ (image->id >> 8) & 0xFF, image->id & 0xFF);
--- /dev/null
+diff -uprN linux-2.6.23.orig/drivers/i2c/chips/eeprom.c linux-2.6.23/drivers/i2c/chips/eeprom.c
+--- linux-2.6.23.orig/drivers/i2c/chips/eeprom.c 2007-10-09 15:31:38.000000000 -0500
++++ linux-2.6.23/drivers/i2c/chips/eeprom.c 2007-10-11 00:57:25.000000000 -0500
+@@ -33,6 +33,8 @@
+ #include <linux/jiffies.h>
+ #include <linux/i2c.h>
+ #include <linux/mutex.h>
++#include <linux/notifier.h>
++#include <linux/eeprom.h>
+
+ /* Addresses to scan */
+ static unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
+@@ -41,26 +43,7 @@ static unsigned short normal_i2c[] = { 0
+ /* Insmod parameters */
+ I2C_CLIENT_INSMOD_1(eeprom);
+
+-
+-/* Size of EEPROM in bytes */
+-#define EEPROM_SIZE 256
+-
+-/* possible types of eeprom devices */
+-enum eeprom_nature {
+- UNKNOWN,
+- VAIO,
+-};
+-
+-/* Each client has this additional data */
+-struct eeprom_data {
+- struct i2c_client client;
+- struct mutex update_lock;
+- u8 valid; /* bitfield, bit!=0 if slice is valid */
+- unsigned long last_updated[8]; /* In jiffies, 8 slices */
+- u8 data[EEPROM_SIZE]; /* Register values */
+- enum eeprom_nature nature;
+-};
+-
++ATOMIC_NOTIFIER_HEAD(eeprom_chain);
+
+ static int eeprom_attach_adapter(struct i2c_adapter *adapter);
+ static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind);
+@@ -191,6 +174,7 @@ static int eeprom_detect(struct i2c_adap
+ data->valid = 0;
+ mutex_init(&data->update_lock);
+ data->nature = UNKNOWN;
++ data->attr = &eeprom_attr;
+
+ /* Tell the I2C layer a new client has arrived */
+ if ((err = i2c_attach_client(new_client)))
+@@ -214,6 +198,9 @@ static int eeprom_detect(struct i2c_adap
+ if (err)
+ goto exit_detach;
+
++ /* call the notifier chain */
++ atomic_notifier_call_chain(&eeprom_chain, EEPROM_REGISTER, data);
++
+ return 0;
+
+ exit_detach:
+@@ -239,6 +226,41 @@ static int eeprom_detach_client(struct i
+ return 0;
+ }
+
++/**
++ * register_eeprom_notifier - register a 'user' of EEPROM devices.
++ * @nb: pointer to notifier info structure
++ *
++ * Registers a callback function to be called upon detection
++ * of an EEPROM device. Detection invokes the 'add' callback
++ * with the kobj of the mutex and a bin_attribute which allows
++ * read from the EEPROM. The intention is that the notifier
++ * will be able to read system configuration from the notifier.
++ *
++ * Only EEPROMs detected *after* the addition of the notifier
++ * are notified. I.e. EEPROMs already known to the system
++ * will not be notified - add the notifier from board level
++ * code!
++ */
++int register_eeprom_notifier(struct notifier_block *nb)
++{
++ return atomic_notifier_chain_register(&eeprom_chain, nb);
++}
++
++/**
++ * unregister_eeprom_notifier - unregister a 'user' of EEPROM devices.
++ * @old: pointer to notifier info structure
++ *
++ * Removes a callback function from the list of 'users' to be
++ * notified upon detection of EEPROM devices.
++ */
++int unregister_eeprom_notifier(struct notifier_block *nb)
++{
++ return atomic_notifier_chain_unregister(&eeprom_chain, nb);
++}
++
++EXPORT_SYMBOL_GPL(register_eeprom_notifier);
++EXPORT_SYMBOL_GPL(unregister_eeprom_notifier);
++
+ static int __init eeprom_init(void)
+ {
+ return i2c_add_driver(&eeprom_driver);
+diff -uprN linux-2.6.23.orig/include/linux/eeprom.h linux-2.6.23/include/linux/eeprom.h
+--- linux-2.6.23.orig/include/linux/eeprom.h 1969-12-31 18:00:00.000000000 -0600
++++ linux-2.6.23/include/linux/eeprom.h 2007-10-11 00:57:25.000000000 -0500
+@@ -0,0 +1,71 @@
++#ifndef _LINUX_EEPROM_H
++#define _LINUX_EEPROM_H
++/*
++ * EEPROM notifier header
++ *
++ * Copyright (C) 2006 John Bowler
++ */
++
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#ifndef __KERNEL__
++#error This is a kernel header
++#endif
++
++#include <linux/list.h>
++#include <linux/kobject.h>
++#include <linux/sysfs.h>
++
++/* Size of EEPROM in bytes */
++#define EEPROM_SIZE 256
++
++/* possible types of eeprom devices */
++enum eeprom_nature {
++ UNKNOWN,
++ VAIO,
++};
++
++/* Each client has this additional data */
++struct eeprom_data {
++ struct i2c_client client;
++ struct mutex update_lock;
++ u8 valid; /* bitfield, bit!=0 if slice is valid */
++ unsigned long last_updated[8]; /* In jiffies, 8 slices */
++ u8 data[EEPROM_SIZE]; /* Register values */
++ enum eeprom_nature nature;
++ struct bin_attribute *attr;
++};
++
++/*
++ * This is very basic.
++ *
++ * If an EEPROM is detected on the I2C bus (this only works for
++ * I2C EEPROMs) the notifier chain is called with
++ * both the I2C information and the kobject for the sysfs
++ * device which has been registers. It is then possible to
++ * read from the device via the bin_attribute::read method
++ * to extract configuration information.
++ *
++ * Register the notifier in the board level code, there is no
++ * need to unregister it but you can if you want (it will save
++ * a little bit or kernel memory to do so).
++ */
++
++extern int register_eeprom_notifier(struct notifier_block *nb);
++extern int unregister_eeprom_notifier(struct notifier_block *nb);
++
++#endif /* _LINUX_EEPROM_H */
+diff -uprN linux-2.6.23.orig/include/linux/notifier.h linux-2.6.23/include/linux/notifier.h
+--- linux-2.6.23.orig/include/linux/notifier.h 2007-10-09 15:31:38.000000000 -0500
++++ linux-2.6.23/include/linux/notifier.h 2007-10-11 00:57:25.000000000 -0500
+@@ -231,5 +231,8 @@ static inline int notifier_to_errno(int
+ #define PM_SUSPEND_PREPARE 0x0003 /* Going to suspend the system */
+ #define PM_POST_SUSPEND 0x0004 /* Suspend finished */
+
++/* eeprom notifier chain */
++#define EEPROM_REGISTER 0x0001
++
+ #endif /* __KERNEL__ */
+ #endif /* _LINUX_NOTIFIER_H */
--- /dev/null
+Index: linux-2.6.24.2/arch/arm/mach-ixp4xx/avila-setup.c
+===================================================================
+--- linux-2.6.24.2.orig/arch/arm/mach-ixp4xx/avila-setup.c
++++ linux-2.6.24.2/arch/arm/mach-ixp4xx/avila-setup.c
+@@ -132,12 +132,42 @@ static struct platform_device avila_pata
+ .resource = avila_pata_resources,
+ };
+
++/* Built-in 10/100 Ethernet MAC interfaces */
++static struct eth_plat_info avila_plat_eth[] = {
++ {
++ .phy = 0,
++ .rxq = 3,
++ .txreadyq = 20,
++ }, {
++ .phy = 1,
++ .rxq = 4,
++ .txreadyq = 21,
++ }
++};
++
++static struct platform_device avila_eth[] = {
++ {
++ .name = "ixp4xx_eth",
++ .id = IXP4XX_ETH_NPEB,
++ .dev.platform_data = avila_plat_eth,
++ }, {
++ .name = "ixp4xx_eth",
++ .id = IXP4XX_ETH_NPEC,
++ .dev.platform_data = avila_plat_eth + 1,
++ }
++};
++
+ static struct platform_device *avila_devices[] __initdata = {
+ &avila_i2c_gpio,
+ &avila_flash,
+ &avila_uart
+ };
+
++static struct platform_device *avila_eth_devices[] = {
++ &avila_eth[0],
++ &avila_eth[1]
++};
++
+ static void __init avila_init(void)
+ {
+ ixp4xx_sys_init();
+@@ -159,6 +189,7 @@ static void __init avila_init(void)
+
+ platform_device_register(&avila_pata);
+
++ platform_add_devices(avila_eth_devices, ARRAY_SIZE(avila_eth_devices));
+ }
+
+ MACHINE_START(AVILA, "Gateworks Avila Network Platform")
--- /dev/null
+diff -uprN linux-2.6.23.orig/arch/arm/mach-ixp4xx/avila-setup.c linux-2.6.23/arch/arm/mach-ixp4xx/avila-setup.c
+--- linux-2.6.23.orig/arch/arm/mach-ixp4xx/avila-setup.c 2007-10-09 15:31:38.000000000 -0500
++++ linux-2.6.23/arch/arm/mach-ixp4xx/avila-setup.c 2007-10-11 01:08:21.000000000 -0500
+@@ -138,6 +138,35 @@ static struct platform_device *avila_dev
+ &avila_uart
+ };
+
++static char avila_rtc_probe[] __initdata = "rtc-ds1672.probe=0,0x68 ";
++
++static void __init avila_fixup(struct machine_desc *desc,
++ struct tag *tags, char **cmdline, struct meminfo *mi)
++{
++ struct tag *t = tags;
++ char *p = *cmdline;
++
++ /* Find the end of the tags table, taking note of any cmdline tag. */
++ for (; t->hdr.size; t = tag_next(t)) {
++ if (t->hdr.tag == ATAG_CMDLINE) {
++ p = t->u.cmdline.cmdline;
++ }
++ }
++
++ /* Overwrite the end of the table with a new cmdline tag. */
++ t->hdr.tag = ATAG_CMDLINE;
++ t->hdr.size = (sizeof (struct tag_header) +
++ strlen(avila_rtc_probe) + strlen(p) + 1 + 4) >> 2;
++ strlcpy(t->u.cmdline.cmdline, avila_rtc_probe, COMMAND_LINE_SIZE);
++ strlcpy(t->u.cmdline.cmdline + strlen(avila_rtc_probe), p,
++ COMMAND_LINE_SIZE - strlen(avila_rtc_probe));
++
++ /* Terminate the table. */
++ t = tag_next(t);
++ t->hdr.tag = ATAG_NONE;
++ t->hdr.size = 0;
++}
++
+ static void __init avila_init(void)
+ {
+ ixp4xx_sys_init();
+@@ -165,6 +194,7 @@ MACHINE_START(AVILA, "Gateworks Avila Ne
+ /* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++ .fixup = avila_fixup,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+@@ -182,6 +212,7 @@ MACHINE_START(LOFT, "Giant Shoulder Inc
+ /* Maintainer: Tom Billman <kernel@giantshoulderinc.com> */
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++ .fixup = avila_fixup,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
--- /dev/null
+Index: linux-2.6.24.2/arch/arm/mach-ixp4xx/avila-setup.c
+===================================================================
+--- linux-2.6.24.2.orig/arch/arm/mach-ixp4xx/avila-setup.c
++++ linux-2.6.24.2/arch/arm/mach-ixp4xx/avila-setup.c
+@@ -14,10 +14,18 @@
+ #include <linux/kernel.h>
+ #include <linux/init.h>
+ #include <linux/device.h>
++#include <linux/if_ether.h>
++#include <linux/socket.h>
++#include <linux/netdevice.h>
+ #include <linux/serial.h>
+ #include <linux/tty.h>
+ #include <linux/serial_8250.h>
+ #include <linux/slab.h>
++#ifdef CONFIG_SENSORS_EEPROM
++# include <linux/i2c.h>
++# include <linux/eeprom.h>
++#endif
++
+ #include <linux/i2c-gpio.h>
+
+ #include <asm/types.h>
+@@ -177,6 +185,118 @@ static struct platform_device *avila_eth
+ &avila_eth[1]
+ };
+
++#ifdef CONFIG_SENSORS_EEPROM
++struct avila_board_info {
++ unsigned char *model;
++ int npes_used;
++ int npeb_phy;
++ int npec_phy;
++};
++
++static struct avila_board_info avila_boards[] = {
++ {
++ .model = "GW2342",
++ .npes_used = 2,
++ .npeb_phy = 0,
++ .npec_phy = 1,
++ }, {
++ .model = "GW2347",
++ .npes_used = 1,
++ .npeb_phy = 1,
++ }, {
++ .model = "GW2348-2",
++ .npes_used = 2,
++ .npeb_phy = 0,
++ .npec_phy = 1,
++ }, {
++ .model = "GW2348-4",
++ .npes_used = 2,
++ .npeb_phy = 0,
++ .npec_phy = 1,
++ }, {
++ .model = "GW2353",
++ .npes_used = 1,
++ .npeb_phy = 1,
++ }, {
++ .model = "GW2355",
++ .npes_used = 2,
++ .npeb_phy = -1,
++ .npec_phy = 1,
++ }, {
++ .model = "GW2357",
++ .npes_used = 1,
++ .npeb_phy = 1,
++ }
++};
++
++static struct avila_board_info *avila_find_board_info(char *model)
++{
++ int i;
++
++ for (i = 0; i < ARRAY_SIZE(avila_boards); i++) {
++ struct avila_board_info *info = &avila_boards[i];
++ if (strncmp(info->model, model, strlen(info->model)) == 0)
++ return info;
++ }
++
++ return NULL;
++}
++
++struct avila_eeprom_header {
++ unsigned char mac0[ETH_ALEN];
++ unsigned char mac1[ETH_ALEN];
++ unsigned char res0[4];
++ unsigned char magic[2];
++ unsigned char config[14];
++ unsigned char model[16];
++};
++
++static int avila_eeprom_notify(struct notifier_block *self,
++ unsigned long event, void *t)
++{
++ struct eeprom_data *ee = t;
++ struct avila_board_info *info = NULL;
++ struct avila_eeprom_header hdr;
++
++ /* The eeprom is at address 0x51 */
++ if (event != EEPROM_REGISTER || ee->client.addr != 0x51)
++ return NOTIFY_DONE;
++
++ ee->attr->read(&ee->client.dev.kobj, ee->attr, (char *)&hdr,
++ 0, sizeof(hdr));
++
++ if (hdr.magic[0] != 'G' || hdr.magic[1] != 'W')
++ return NOTIFY_DONE;
++
++ memcpy(&avila_plat_eth[0].hwaddr, hdr.mac0, ETH_ALEN);
++ memcpy(&avila_plat_eth[1].hwaddr, hdr.mac1, ETH_ALEN);
++
++ info = avila_find_board_info(hdr.model);
++
++ if (info) {
++ printk(KERN_DEBUG "Running on Gateworks Avila %s\n",
++ info->model);
++ avila_plat_eth[0].phy = info->npeb_phy;
++ avila_plat_eth[1].phy = info->npec_phy;
++ platform_add_devices(avila_eth_devices,
++ info->npes_used);
++ } else {
++ printk(KERN_INFO "Unknown/missing Avila model number"
++ " -- defaults will be used\n");
++ platform_add_devices(avila_eth_devices,
++ ARRAY_SIZE(avila_eth_devices));
++ }
++
++ unregister_eeprom_notifier(self);
++
++ return NOTIFY_OK;
++}
++
++static struct notifier_block avila_eeprom_notifier = {
++ .notifier_call = avila_eeprom_notify
++};
++#endif
++
+ static void __init avila_init(void)
+ {
+ ixp4xx_sys_init();
+@@ -201,7 +321,11 @@ static void __init avila_init(void)
+
+ platform_device_register(&avila_pata);
+
++#ifdef CONFIG_SENSORS_EEPROM
++ register_eeprom_notifier(&avila_eeprom_notifier);
++#else
+ platform_add_devices(avila_eth_devices, ARRAY_SIZE(avila_eth_devices));
++#endif
+ }
+
+ MACHINE_START(AVILA, "Gateworks Avila Network Platform")
--- /dev/null
+Index: linux-2.6.24.2/include/asm-arm/arch-ixp4xx/avila.h
+===================================================================
+--- linux-2.6.24.2.orig/include/asm-arm/arch-ixp4xx/avila.h
++++ linux-2.6.24.2/include/asm-arm/arch-ixp4xx/avila.h
+@@ -36,4 +36,5 @@
+ #define AVILA_PCI_INTC_PIN 9
+ #define AVILA_PCI_INTD_PIN 8
+
+-
++/* User LED */
++#define AVILA_LED_USER_GPIO 3
+Index: linux-2.6.24.2/arch/arm/mach-ixp4xx/avila-setup.c
+===================================================================
+--- linux-2.6.24.2.orig/arch/arm/mach-ixp4xx/avila-setup.c
++++ linux-2.6.24.2/arch/arm/mach-ixp4xx/avila-setup.c
+@@ -174,10 +174,31 @@ static struct platform_device avila_eth[
+ }
+ };
+
++#ifdef CONFIG_LEDS_IXP4XX
++static struct resource avila_led_resources[] = {
++ {
++ .name = "user",
++ .start = AVILA_LED_USER_GPIO,
++ .end = AVILA_LED_USER_GPIO,
++ .flags = IXP4XX_GPIO_LOW,
++ },
++};
++
++static struct platform_device avila_leds = {
++ .name = "IXP4XX-GPIO-LED",
++ .id = -1,
++ .num_resources = ARRAY_SIZE(avila_led_resources),
++ .resource = avila_led_resources,
++};
++#endif
++
+ static struct platform_device *avila_devices[] __initdata = {
+ &avila_i2c_gpio,
+ &avila_flash,
+- &avila_uart
++ &avila_uart,
++#ifdef CONFIG_LEDS_IXP4XX
++ &avila_leds,
++#endif
+ };
+
+ static struct platform_device *avila_eth_devices[] = {
--- /dev/null
+Index: linux-2.6.24.2/arch/arm/mach-ixp4xx/avila-setup.c
+===================================================================
+--- linux-2.6.24.2.orig/arch/arm/mach-ixp4xx/avila-setup.c
++++ linux-2.6.24.2/arch/arm/mach-ixp4xx/avila-setup.c
+@@ -192,6 +192,24 @@ static struct platform_device avila_leds
+ };
+ #endif
+
++#ifdef CONFIG_GPIO_DEVICE
++static struct resource avila_gpio_resources[] = {
++ {
++ .name = "gpio",
++ .start = AVILA_GPIO_MASK,
++ .end = AVILA_GPIO_MASK,
++ .flags = 0,
++ },
++};
++
++static struct platform_device avila_gpio = {
++ .name = "GPIODEV",
++ .id = -1,
++ .num_resources = ARRAY_SIZE(avila_gpio_resources),
++ .resource = avila_gpio_resources,
++};
++#endif
++
+ static struct platform_device *avila_devices[] __initdata = {
+ &avila_i2c_gpio,
+ &avila_flash,
+@@ -199,6 +217,9 @@ static struct platform_device *avila_dev
+ #ifdef CONFIG_LEDS_IXP4XX
+ &avila_leds,
+ #endif
++#ifdef CONFIG_GPIO_DEVICE
++ &avila_gpio,
++#endif
+ };
+
+ static struct platform_device *avila_eth_devices[] = {
+Index: linux-2.6.24.2/include/asm-arm/arch-ixp4xx/avila.h
+===================================================================
+--- linux-2.6.24.2.orig/include/asm-arm/arch-ixp4xx/avila.h
++++ linux-2.6.24.2/include/asm-arm/arch-ixp4xx/avila.h
+@@ -38,3 +38,6 @@
+
+ /* User LED */
+ #define AVILA_LED_USER_GPIO 3
++
++/* gpio mask used by platform device */
++#define AVILA_GPIO_MASK (1 << 1) | (1 << 3) | (1 << 5) | (1 << 7) | (1 << 9)
--- /dev/null
+Index: linux-2.6.23.14/arch/arm/common/dmabounce.c
+===================================================================
+--- linux-2.6.23.14.orig/arch/arm/common/dmabounce.c 2008-01-24 22:03:28.475500801 +0100
++++ linux-2.6.23.14/arch/arm/common/dmabounce.c 2008-01-24 22:17:36.415822168 +0100
+@@ -116,6 +116,10 @@
+ } else if (size <= device_info->large.size) {
+ pool = &device_info->large;
+ } else {
++#ifdef CONFIG_DMABOUNCE_DEBUG
++ printk(KERN_INFO "A dma bounce buffer outside the pool size was requested. Requested size was 0x%08X\nThe calling code was :\n", size);
++ dump_stack();
++#endif
+ pool = NULL;
+ }
+
+Index: linux-2.6.23.14/arch/arm/mach-ixp4xx/Kconfig
+===================================================================
+--- linux-2.6.23.14.orig/arch/arm/mach-ixp4xx/Kconfig 2008-01-24 22:10:29.331484012 +0100
++++ linux-2.6.23.14/arch/arm/mach-ixp4xx/Kconfig 2008-01-24 22:11:42.891675973 +0100
+@@ -220,6 +220,11 @@
+ default y
+ depends on PCI
+
++config DMABOUNCE_DEBUG
++ bool "Enable DMABounce debuging"
++ default n
++ depends on DMABOUNCE
++
+ config IXP4XX_INDIRECT_PCI
+ bool "Use indirect PCI memory access"
+ depends on PCI
--- /dev/null
+Index: linux-2.6.23.14/include/asm-arm/arch-ixp4xx/avila.h
+===================================================================
+--- linux-2.6.23.14.orig/include/asm-arm/arch-ixp4xx/avila.h 2008-01-31 17:40:36.000000000 +0100
++++ linux-2.6.23.14/include/asm-arm/arch-ixp4xx/avila.h 2008-01-31 17:40:42.000000000 +0100
+@@ -25,7 +25,7 @@
+ /*
+ * AVILA PCI IRQs
+ */
+-#define AVILA_PCI_MAX_DEV 4
++#define AVILA_PCI_MAX_DEV 6
+ #define LOFT_PCI_MAX_DEV 6
+ #define AVILA_PCI_IRQ_LINES 4
+
projects / openwrt / staging / kaloz.git / commitdiff