struct wl1251 *wl = hw->priv;
int ret = 0;
- vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER;
+ vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER |
+ IEEE80211_VIF_SUPPORTS_CQM_RSSI;
wl1251_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM",
vif->type, vif->addr);
wl->hw->flags = IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_SUPPORTS_PS |
- IEEE80211_HW_SUPPORTS_UAPSD |
- IEEE80211_HW_SUPPORTS_CQM_RSSI;
+ IEEE80211_HW_SUPPORTS_UAPSD;
wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC);
u8 role_type;
bool booted = false;
- vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER;
+ vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER |
+ IEEE80211_VIF_SUPPORTS_CQM_RSSI;
wl1271_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM",
ieee80211_vif_type_p2p(vif), vif->addr);
IEEE80211_HW_SUPPORTS_UAPSD |
IEEE80211_HW_HAS_RATE_CONTROL |
IEEE80211_HW_CONNECTION_MONITOR |
- IEEE80211_HW_SUPPORTS_CQM_RSSI |
IEEE80211_HW_REPORTS_TX_ACK_STATUS |
IEEE80211_HW_SPECTRUM_MGMT |
IEEE80211_HW_AP_LINK_PS |
*
* @IEEE80211_VIF_BEACON_FILTER: the device performs beacon filtering
* on this virtual interface to avoid unnecessary CPU wakeups
+ * @IEEE80211_VIF_SUPPORTS_CQM_RSSI: the device can do connection quality
+ * monitoring on this virtual interface -- i.e. it can monitor
+ * connection quality related parameters, such as the RSSI level and
+ * provide notifications if configured trigger levels are reached.
*/
enum ieee80211_vif_flags {
IEEE80211_VIF_BEACON_FILTER = BIT(0),
+ IEEE80211_VIF_SUPPORTS_CQM_RSSI = BIT(1),
};
/**
* When this flag is set, signaling beacon-loss will cause an immediate
* change to disassociated state.
*
- * @IEEE80211_HW_SUPPORTS_CQM_RSSI:
- * Hardware can do connection quality monitoring - i.e. it can monitor
- * connection quality related parameters, such as the RSSI level and
- * provide notifications if configured trigger levels are reached.
- *
* @IEEE80211_HW_NEED_DTIM_PERIOD:
* This device needs to know the DTIM period for the BSS before
* associating.
IEEE80211_HW_SUPPORTS_UAPSD = 1<<17,
IEEE80211_HW_REPORTS_TX_ACK_STATUS = 1<<18,
IEEE80211_HW_CONNECTION_MONITOR = 1<<19,
- IEEE80211_HW_SUPPORTS_CQM_RSSI = 1<<20,
+ /* reuse bit 20 */
IEEE80211_HW_SUPPORTS_PER_STA_GTK = 1<<21,
IEEE80211_HW_AP_LINK_PS = 1<<22,
IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23,
* @rssi_event: the RSSI trigger event type
* @gfp: context flags
*
- * When the %IEEE80211_HW_SUPPORTS_CQM_RSSI is set, and a connection quality
+ * When the %IEEE80211_VIF_SUPPORTS_CQM_RSSI is set, and a connection quality
* monitoring is configured with an rssi threshold, the driver will inform
* whenever the rssi level reaches the threshold.
*/
s32 rssi_thold, u32 rssi_hyst)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_vif *vif = &sdata->vif;
struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
bss_conf->cqm_rssi_thold = rssi_thold;
bss_conf->cqm_rssi_hyst = rssi_hyst;
- if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_CQM_RSSI)) {
- if (sdata->vif.type != NL80211_IFTYPE_STATION)
- return -EOPNOTSUPP;
- return 0;
- }
-
/* tell the driver upon association, unless already associated */
- if (sdata->u.mgd.associated)
+ if (sdata->u.mgd.associated &&
+ sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_CQM);
return 0;
sf += snprintf(buf + sf, mxln - sf, "REPORTS_TX_ACK_STATUS\n");
if (local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR)
sf += snprintf(buf + sf, mxln - sf, "CONNECTION_MONITOR\n");
- if (local->hw.flags & IEEE80211_HW_SUPPORTS_CQM_RSSI)
- sf += snprintf(buf + sf, mxln - sf, "SUPPORTS_CQM_RSSI\n");
if (local->hw.flags & IEEE80211_HW_SUPPORTS_PER_STA_GTK)
sf += snprintf(buf + sf, mxln - sf, "SUPPORTS_PER_STA_GTK\n");
if (local->hw.flags & IEEE80211_HW_AP_LINK_PS)
bss_info_changed |= BSS_CHANGED_BSSID;
/* Tell the driver to monitor connection quality (if supported) */
- if ((local->hw.flags & IEEE80211_HW_SUPPORTS_CQM_RSSI) &&
+ if (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI &&
bss_conf->cqm_rssi_thold)
bss_info_changed |= BSS_CHANGED_CQM;
if (bss_conf->cqm_rssi_thold &&
ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT &&
- !(local->hw.flags & IEEE80211_HW_SUPPORTS_CQM_RSSI)) {
+ !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) {
int sig = ifmgd->ave_beacon_signal / 16;
int last_event = ifmgd->last_cqm_event_signal;
int thold = bss_conf->cqm_rssi_thold;