include $(TOPDIR)/rules.mk
PKG_NAME:=ath10k-ct
-PKG_RELEASE=1
+PKG_RELEASE=2
PKG_LICENSE:=GPLv2
PKG_LICENSE_FILES:=
define KernelPackage/ath10k-ct
SUBMENU:=Wireless Drivers
TITLE:=ath10k-ct driver optimized for CT ath10k firmware
- DEPENDS:=+kmod-mac80211 +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT @PCI_SUPPORT +@KERNEL_RELAY +kmod-hwmon-core
+ DEPENDS:=+kmod-mac80211 +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT @PCI_SUPPORT +kmod-hwmon-core
FILES:=\
$(PKG_BUILD_DIR)/ath10k$(CT_KVER)/ath10k_pci.ko \
$(PKG_BUILD_DIR)/ath10k$(CT_KVER)/ath10k_core.ko
NOSTDINC_FLAGS += -DCONFIG_ATH10K_DFS_CERTIFIED
endif
+ifdef CONFIG_PACKAGE_ATH_SPECTRAL
+ CT_MAKEDEFS += CONFIG_ATH10K_SPECTRAL=y
+ NOSTDINC_FLAGS += -DCONFIG_ATH10K_SPECTRAL
+endif
+
define Build/Configure
cp $(STAGING_DIR)/usr/include/mac80211/ath/*.h $(PKG_BUILD_DIR)
endef
--- /dev/null
+From 42e01cb9cb109fb0bb4743f6c54d6aa67ac39b61 Mon Sep 17 00:00:00 2001
+Message-Id: <42e01cb9cb109fb0bb4743f6c54d6aa67ac39b61.1515610034.git.mschiffer@universe-factory.net>
+In-Reply-To: <9df7ddc3ed25b7d3473f117a0680b9418adb5753.1515610034.git.mschiffer@universe-factory.net>
+References: <9df7ddc3ed25b7d3473f117a0680b9418adb5753.1515610034.git.mschiffer@universe-factory.net>
+From: Matthias Schiffer <mschiffer@universe-factory.net>
+Date: Mon, 27 Nov 2017 18:56:23 +0100
+Subject: [PATCH 2/2] ath10k: move spectral scan support under a separate
+ config symbol
+
+At the moment, spectral scan support, and with it RELAY, is always enabled
+with ATH10K_DEBUGFS. Spectral scan support is currently the only user of
+RELAY in ath10k, and it unconditionally reserves a relay channel.
+
+Having debugfs support in ath10k is often useful even on very small
+embedded routers, where we'd rather like to avoid the code size and RAM
+usage of the relay support. While ath10k-based devices usually have more
+resources than ath9k-based ones, it makes sense to keep the configuration
+symmetric to ath9k, so the same base kernel without RELAY can be used for
+both ath9k and ath10k hardware.
+
+Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
+Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
+---
+ ath10k-4.13/Kconfig | 9 ++++++++-
+ ath10k-4.13/Makefile | 2 +-
+ ath10k-4.13/spectral.h | 4 ++--
+ 3 files changed, 11 insertions(+), 4 deletions(-)
+
+--- a/ath10k-4.13/Kconfig
++++ b/ath10k-4.13/Kconfig
+@@ -40,12 +40,19 @@ config ATH10K_DEBUG
+ config ATH10K_DEBUGFS
+ bool "Atheros ath10k debugfs support"
+ depends on ATH10K && DEBUG_FS
+- select RELAY
+ ---help---
+ Enabled debugfs support
+
+ If unsure, say Y to make it easier to debug problems.
+
++config ATH10K_SPECTRAL
++ bool "Atheros ath10k spectral scan support"
++ depends on ATH10K_DEBUGFS
++ select RELAY
++ default n
++ ---help---
++ Say Y to enable access to the FFT/spectral data via debugfs.
++
+ config ATH10K_TRACING
+ bool "Atheros ath10k tracing support"
+ depends on ATH10K
+--- a/ath10k-4.13/Makefile
++++ b/ath10k-4.13/Makefile
+@@ -14,7 +14,7 @@ ath10k_core-y += mac.o \
+ p2p.o \
+ swap.o
+
+-ath10k_core-$(CONFIG_ATH10K_DEBUGFS) += spectral.o
++ath10k_core-$(CONFIG_ATH10K_SPECTRAL) += spectral.o
+ ath10k_core-$(CONFIG_NL80211_TESTMODE) += testmode.o
+ ath10k_core-$(CONFIG_ATH10K_TRACING) += trace.o
+ ath10k_core-$(CONFIG_THERMAL) += thermal.o
+--- a/ath10k-4.13/spectral.h
++++ b/ath10k-4.13/spectral.h
+@@ -44,7 +44,7 @@ enum ath10k_spectral_mode {
+ SPECTRAL_MANUAL,
+ };
+
+-#ifdef CONFIG_ATH10K_DEBUGFS
++#ifdef CONFIG_ATH10K_SPECTRAL
+
+ int ath10k_spectral_process_fft(struct ath10k *ar,
+ struct wmi_phyerr_ev_arg *phyerr,
+@@ -85,6 +85,6 @@ static inline void ath10k_spectral_destr
+ {
+ }
+
+-#endif /* CONFIG_ATH10K_DEBUGFS */
++#endif /* CONFIG_ATH10K_SPECTRAL */
+
+ #endif /* SPECTRAL_H */
PKG_NAME:=mac80211
PKG_VERSION:=2017-11-01
-PKG_RELEASE:=1
+PKG_RELEASE:=2
PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources
PKG_HASH:=8437ab7886b988c8152e7a4db30b7f41009e49a3b2cb863edd05da1ecd7eb05a
CONFIG_PACKAGE_MAC80211_TRACING \
CONFIG_PACKAGE_ATH_DEBUG \
CONFIG_PACKAGE_ATH_DFS \
+ CONFIG_PACKAGE_ATH_SPECTRAL \
CONFIG_PACKAGE_B43_DEBUG \
CONFIG_PACKAGE_B43_PIO \
CONFIG_PACKAGE_B43_PHY_G \
Select this option if you want to use such channels.
+ config PACKAGE_ATH_SPECTRAL
+ bool "Atheros spectral scan support"
+ depends on PACKAGE_ATH_DEBUG
+ select KERNEL_RELAY
+ help
+ Say Y to enable access to the FFT/spectral data via debugfs.
+
endif
endef
TITLE:=Atheros FullMAC wireless devices (common code for ath6kl_sdio and ath6kl_usb)
URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath6kl
HIDDEN:=1
- DEPENDS+= +kmod-ath +@DRIVER_11N_SUPPORT +@KERNEL_RELAY
+ DEPENDS+= +kmod-ath +@DRIVER_11N_SUPPORT
FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath6kl/ath6kl_core.ko
endef
TITLE:=Atheros 802.11n wireless devices (common code for ath9k and ath9k_htc)
URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k
HIDDEN:=1
- DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11W_SUPPORT +@KERNEL_RELAY
+ DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11W_SUPPORT
FILES:= \
$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_common.ko \
$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_hw.ko
$(call KernelPackage/mac80211/Default)
TITLE:=Atheros 802.11ac wireless cards support
URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath10k
- DEPENDS+= @PCI_SUPPORT +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +@DRIVER_11W_SUPPORT +@KERNEL_RELAY
+ DEPENDS+= @PCI_SUPPORT +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +@DRIVER_11W_SUPPORT
FILES:= \
$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_core.ko \
$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_pci.ko
config-$(call config_package,ath) += ATH_CARDS ATH_COMMON ATH_REG_DYNAMIC_USER_REG_HINTS
config-$(CONFIG_PACKAGE_ATH_DEBUG) += ATH_DEBUG ATH10K_DEBUG ATH9K_STATION_STATISTICS
config-$(CONFIG_PACKAGE_ATH_DFS) += ATH9K_DFS_CERTIFIED ATH10K_DFS_CERTIFIED
+config-$(CONFIG_PACKAGE_ATH_SPECTRAL) += ATH9K_COMMON_SPECTRAL ATH10K_SPECTRAL
config-$(call config_package,ath9k) += ATH9K
config-$(call config_package,ath9k-common) += ATH9K_COMMON
--- /dev/null
+From 9df7ddc3ed25b7d3473f117a0680b9418adb5753 Mon Sep 17 00:00:00 2001
+Message-Id: <9df7ddc3ed25b7d3473f117a0680b9418adb5753.1515610034.git.mschiffer@universe-factory.net>
+From: Matthias Schiffer <mschiffer@universe-factory.net>
+Date: Mon, 27 Nov 2017 18:56:22 +0100
+Subject: [PATCH 1/2] ath9k: move spectral scan support under a separate config
+ symbol
+
+At the moment, spectral scan support, and with it RELAY, is always enabled
+with ATH9K[_HTC]_DEBUGFS. Spectral scan support is currently the only user
+of RELAY in ath9k, and it unconditionally reserves a relay channel.
+
+Having debugfs support in ath9k is often useful even on very small embedded
+routers, where we'd rather like to avoid the code size and RAM usage of the
+relay support.
+
+Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
+Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
+---
+ drivers/net/wireless/ath/ath9k/Kconfig | 14 ++++++++++----
+ drivers/net/wireless/ath/ath9k/Makefile | 4 ++--
+ drivers/net/wireless/ath/ath9k/common-spectral.h | 4 ++--
+ 3 files changed, 14 insertions(+), 8 deletions(-)
+
+--- a/drivers/net/wireless/ath/ath9k/Kconfig
++++ b/drivers/net/wireless/ath/ath9k/Kconfig
+@@ -64,13 +64,12 @@ config ATH9K_DEBUGFS
+ depends on ATH9K && DEBUG_FS
+ select MAC80211_DEBUGFS
+ select ATH9K_COMMON_DEBUG
+- depends on RELAY
+ ---help---
+ Say Y, if you need access to ath9k's statistics for
+ interrupts, rate control, etc.
+
+- Also required for changing debug message flags at run time.
+- As well as access to the FFT/spectral data and TX99.
++ Also required for changing debug message flags at run time and for
++ TX99.
+
+ config ATH9K_STATION_STATISTICS
+ bool "Detailed station statistics"
+@@ -181,7 +180,6 @@ config ATH9K_HTC_DEBUGFS
+ bool "Atheros ath9k_htc debugging"
+ depends on ATH9K_HTC && DEBUG_FS
+ select ATH9K_COMMON_DEBUG
+- depends on RELAY
+ ---help---
+ Say Y, if you need access to ath9k_htc's statistics.
+ As well as access to the FFT/spectral data.
+@@ -197,3 +195,11 @@ config ATH9K_HWRNG
+
+ Say Y, feeds the entropy directly from the WiFi driver to the input
+ pool.
++
++config ATH9K_COMMON_SPECTRAL
++ bool "Atheros ath9k/ath9k_htc spectral scan support"
++ depends on ATH9K_DEBUGFS || ATH9K_HTC_DEBUGFS
++ depends on RELAY
++ default n
++ ---help---
++ Say Y to enable access to the FFT/spectral data via debugfs.
+--- a/drivers/net/wireless/ath/ath9k/Makefile
++++ b/drivers/net/wireless/ath/ath9k/Makefile
+@@ -61,8 +61,8 @@ ath9k_common-y:= common.o \
+ common-init.o \
+ common-beacon.o \
+
+-ath9k_common-$(CPTCFG_ATH9K_COMMON_DEBUG) += common-debug.o \
+- common-spectral.o
++ath9k_common-$(CPTCFG_ATH9K_COMMON_DEBUG) += common-debug.o
++ath9k_common-$(CPTCFG_ATH9K_COMMON_SPECTRAL) += common-spectral.o
+
+ ath9k_htc-y += htc_hst.o \
+ hif_usb.o \
+--- a/drivers/net/wireless/ath/ath9k/common-spectral.h
++++ b/drivers/net/wireless/ath/ath9k/common-spectral.h
+@@ -151,7 +151,7 @@ static inline u8 spectral_bitmap_weight(
+ return bins[0] & 0x3f;
+ }
+
+-#ifdef CPTCFG_ATH9K_COMMON_DEBUG
++#ifdef CPTCFG_ATH9K_COMMON_SPECTRAL
+ void ath9k_cmn_spectral_init_debug(struct ath_spec_scan_priv *spec_priv, struct dentry *debugfs_phy);
+ void ath9k_cmn_spectral_deinit_debug(struct ath_spec_scan_priv *spec_priv);
+
+@@ -183,6 +183,6 @@ static inline int ath_cmn_process_fft(st
+ {
+ return 0;
+ }
+-#endif /* CPTCFG_ATH9K_COMMON_DEBUG */
++#endif /* CPTCFG_ATH9K_COMMON_SPECTRAL */
+
+ #endif /* SPECTRAL_H */
+--- a/local-symbols
++++ b/local-symbols
+@@ -116,6 +116,7 @@ ATH9K_PCOEM=
+ ATH9K_HTC=
+ ATH9K_HTC_DEBUGFS=
+ ATH9K_HWRNG=
++ATH9K_COMMON_SPECTRAL=
+ CARL9170=
+ CARL9170_LEDS=
+ CARL9170_DEBUGFS=
--- /dev/null
+From 42e01cb9cb109fb0bb4743f6c54d6aa67ac39b61 Mon Sep 17 00:00:00 2001
+Message-Id: <42e01cb9cb109fb0bb4743f6c54d6aa67ac39b61.1515610034.git.mschiffer@universe-factory.net>
+In-Reply-To: <9df7ddc3ed25b7d3473f117a0680b9418adb5753.1515610034.git.mschiffer@universe-factory.net>
+References: <9df7ddc3ed25b7d3473f117a0680b9418adb5753.1515610034.git.mschiffer@universe-factory.net>
+From: Matthias Schiffer <mschiffer@universe-factory.net>
+Date: Mon, 27 Nov 2017 18:56:23 +0100
+Subject: [PATCH 2/2] ath10k: move spectral scan support under a separate
+ config symbol
+
+At the moment, spectral scan support, and with it RELAY, is always enabled
+with ATH10K_DEBUGFS. Spectral scan support is currently the only user of
+RELAY in ath10k, and it unconditionally reserves a relay channel.
+
+Having debugfs support in ath10k is often useful even on very small
+embedded routers, where we'd rather like to avoid the code size and RAM
+usage of the relay support. While ath10k-based devices usually have more
+resources than ath9k-based ones, it makes sense to keep the configuration
+symmetric to ath9k, so the same base kernel without RELAY can be used for
+both ath9k and ath10k hardware.
+
+Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
+Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
+---
+ drivers/net/wireless/ath/ath10k/Kconfig | 9 ++++++++-
+ drivers/net/wireless/ath/ath10k/Makefile | 2 +-
+ drivers/net/wireless/ath/ath10k/spectral.h | 4 ++--
+ 3 files changed, 11 insertions(+), 4 deletions(-)
+
+--- a/drivers/net/wireless/ath/ath10k/Kconfig
++++ b/drivers/net/wireless/ath/ath10k/Kconfig
+@@ -51,12 +51,19 @@ config ATH10K_DEBUG
+ config ATH10K_DEBUGFS
+ bool "Atheros ath10k debugfs support"
+ depends on ATH10K && DEBUG_FS
+- depends on RELAY
+ ---help---
+ Enabled debugfs support
+
+ If unsure, say Y to make it easier to debug problems.
+
++config ATH10K_SPECTRAL
++ bool "Atheros ath10k spectral scan support"
++ depends on ATH10K_DEBUGFS
++ depends on RELAY
++ default n
++ ---help---
++ Say Y to enable access to the FFT/spectral data via debugfs.
++
+ config ATH10K_TRACING
+ depends on !KERNEL_3_4
+ bool "Atheros ath10k tracing support"
+--- a/drivers/net/wireless/ath/ath10k/Makefile
++++ b/drivers/net/wireless/ath/ath10k/Makefile
+@@ -14,7 +14,7 @@ ath10k_core-y += mac.o \
+ p2p.o \
+ swap.o
+
+-ath10k_core-$(CPTCFG_ATH10K_DEBUGFS) += spectral.o
++ath10k_core-$(CPTCFG_ATH10K_SPECTRAL) += spectral.o
+ ath10k_core-$(CPTCFG_NL80211_TESTMODE) += testmode.o
+ ath10k_core-$(CPTCFG_ATH10K_TRACING) += trace.o
+ ath10k_core-$(CPTCFG_ATH10K_THERMAL) += thermal.o
+--- a/drivers/net/wireless/ath/ath10k/spectral.h
++++ b/drivers/net/wireless/ath/ath10k/spectral.h
+@@ -44,7 +44,7 @@ enum ath10k_spectral_mode {
+ SPECTRAL_MANUAL,
+ };
+
+-#ifdef CPTCFG_ATH10K_DEBUGFS
++#ifdef CPTCFG_ATH10K_SPECTRAL
+
+ int ath10k_spectral_process_fft(struct ath10k *ar,
+ struct wmi_phyerr_ev_arg *phyerr,
+@@ -85,6 +85,6 @@ static inline void ath10k_spectral_destr
+ {
+ }
+
+-#endif /* CPTCFG_ATH10K_DEBUGFS */
++#endif /* CPTCFG_ATH10K_SPECTRAL */
+
+ #endif /* SPECTRAL_H */
+--- a/local-symbols
++++ b/local-symbols
+@@ -140,6 +140,7 @@ ATH10K_SDIO=
+ ATH10K_USB=
+ ATH10K_DEBUG=
+ ATH10K_DEBUGFS=
++ATH10K_SPECTRAL=
+ ATH10K_TRACING=
+ ATH10K_DFS_CERTIFIED=
+ WCN36XX=
projects / openwrt / staging / noltari.git / commitdiff