tools-y += m4 libtool autoconf automake flex bison pkg-config sed mklibs
tools-y += sstrip ipkg-utils genext2fs e2fsprogs mtd-utils mkimage
tools-y += firmware-utils patch-image patch quilt yaffs2 flock padjffs2
-tools-y += mm-macros xorg-macros xfce-macros missing-macros xz cmake scons bc
-tools-y += findutils gengetopt patchelf
+tools-y += missing-macros xz cmake scons bc findutils gengetopt patchelf
tools-$(CONFIG_TARGET_orion_generic) += wrt350nv2-builder upslug2
tools-$(CONFIG_powerpc) += upx
tools-$(CONFIG_TARGET_x86) += qemu
$(curdir)/mklibs/compile := $(curdir)/libtool/install
$(curdir)/qemu/compile := $(curdir)/e2fsprogs/install
$(curdir)/upslug2/compile := $(curdir)/libtool/install
-$(curdir)/mm-macros/compile := $(curdir)/libtool/install
-$(curdir)/xorg-macros/compile := $(curdir)/libtool/install
-$(curdir)/xfce-macros/compile := $(curdir)/libtool/install
$(curdir)/missing-macros/compile := $(curdir)/autoconf/install
$(curdir)/e2fsprogs/compile := $(curdir)/libtool/install
$(curdir)/libelf/compile := $(curdir)/libtool/install
+++ /dev/null
-# esd.m4 serial 1 (libmikmod-3.1.12)
-# Configure paths for ESD
-# Manish Singh 98-9-30
-# stolen back from Frank Belew
-# stolen from Manish Singh
-# Shamelessly stolen from Owen Taylor
-
-dnl AM_PATH_ESD([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
-dnl Test for ESD, and define ESD_CFLAGS and ESD_LIBS
-dnl
-AC_DEFUN([AM_PATH_ESD],
-[dnl
-dnl Get the cflags and libraries from the esd-config script
-dnl
-AC_ARG_WITH(esd-prefix,[ --with-esd-prefix=PFX Prefix where ESD is installed (optional)],
- esd_prefix="$withval", esd_prefix="")
-AC_ARG_WITH(esd-exec-prefix,[ --with-esd-exec-prefix=PFX Exec prefix where ESD is installed (optional)],
- esd_exec_prefix="$withval", esd_exec_prefix="")
-AC_ARG_ENABLE(esdtest, [ --disable-esdtest Do not try to compile and run a test ESD program],
- , enable_esdtest=yes)
-
- if test x$esd_exec_prefix != x ; then
- esd_args="$esd_args --exec-prefix=$esd_exec_prefix"
- if test x${ESD_CONFIG+set} != xset ; then
- ESD_CONFIG=$esd_exec_prefix/bin/esd-config
- fi
- fi
- if test x$esd_prefix != x ; then
- esd_args="$esd_args --prefix=$esd_prefix"
- if test x${ESD_CONFIG+set} != xset ; then
- ESD_CONFIG=$esd_prefix/bin/esd-config
- fi
- fi
-
- AC_PATH_PROG(ESD_CONFIG, esd-config, no)
- min_esd_version=ifelse([$1], ,0.2.7,$1)
- AC_MSG_CHECKING(for ESD - version >= $min_esd_version)
- no_esd=""
- if test "$ESD_CONFIG" = "no" ; then
- no_esd=yes
- else
- AC_LANG_SAVE
- AC_LANG_C
- ESD_CFLAGS=`$ESD_CONFIG $esdconf_args --cflags`
- ESD_LIBS=`$ESD_CONFIG $esdconf_args --libs`
-
- esd_major_version=`$ESD_CONFIG $esd_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
- esd_minor_version=`$ESD_CONFIG $esd_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
- esd_micro_version=`$ESD_CONFIG $esd_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
- if test "x$enable_esdtest" = "xyes" ; then
- ac_save_CFLAGS="$CFLAGS"
- ac_save_LIBS="$LIBS"
- CFLAGS="$CFLAGS $ESD_CFLAGS"
- LIBS="$LIBS $ESD_LIBS"
-dnl
-dnl Now check if the installed ESD is sufficiently new. (Also sanity
-dnl checks the results of esd-config to some extent
-dnl
- rm -f conf.esdtest
- AC_TRY_RUN([
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <esd.h>
-
-char*
-my_strdup (char *str)
-{
- char *new_str;
-
- if (str)
- {
- new_str = malloc ((strlen (str) + 1) * sizeof(char));
- strcpy (new_str, str);
- }
- else
- new_str = NULL;
-
- return new_str;
-}
-
-int main ()
-{
- int major, minor, micro;
- char *tmp_version;
-
- system ("touch conf.esdtest");
-
- /* HP/UX 9 (%@#!) writes to sscanf strings */
- tmp_version = my_strdup("$min_esd_version");
- if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
- printf("%s, bad version string\n", "$min_esd_version");
- exit(1);
- }
-
- if (($esd_major_version > major) ||
- (($esd_major_version == major) && ($esd_minor_version > minor)) ||
- (($esd_major_version == major) && ($esd_minor_version == minor) && ($esd_micro_version >= micro)))
- {
- return 0;
- }
- else
- {
- printf("\n*** 'esd-config --version' returned %d.%d.%d, but the minimum version\n", $esd_major_version, $esd_minor_version, $esd_micro_version);
- printf("*** of ESD required is %d.%d.%d. If esd-config is correct, then it is\n", major, minor, micro);
- printf("*** best to upgrade to the required version.\n");
- printf("*** If esd-config was wrong, set the environment variable ESD_CONFIG\n");
- printf("*** to point to the correct copy of esd-config, and remove the file\n");
- printf("*** config.cache before re-running configure\n");
- return 1;
- }
-}
-
-],, no_esd=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
- CFLAGS="$ac_save_CFLAGS"
- LIBS="$ac_save_LIBS"
- AC_LANG_RESTORE
- fi
- fi
- if test "x$no_esd" = x ; then
- AC_MSG_RESULT(yes)
- ifelse([$2], , :, [$2])
- else
- AC_MSG_RESULT(no)
- if test "$ESD_CONFIG" = "no" ; then
- echo "*** The esd-config script installed by ESD could not be found"
- echo "*** If ESD was installed in PREFIX, make sure PREFIX/bin is in"
- echo "*** your path, or set the ESD_CONFIG environment variable to the"
- echo "*** full path to esd-config."
- else
- if test -f conf.esdtest ; then
- :
- else
- echo "*** Could not run ESD test program, checking why..."
- CFLAGS="$CFLAGS $ESD_CFLAGS"
- LIBS="$LIBS $ESD_LIBS"
- AC_LANG_SAVE
- AC_LANG_C
- AC_TRY_LINK([
-#include <stdio.h>
-#include <esd.h>
-], [ return 0; ],
- [ echo "*** The test program compiled, but did not run. This usually means"
- echo "*** that the run-time linker is not finding ESD or finding the wrong"
- echo "*** version of ESD. If it is not finding ESD, you'll need to set your"
- echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
- echo "*** to the installed location Also, make sure you have run ldconfig if that"
- echo "*** is required on your system"
- echo "***"
- echo "*** If you have an old version installed, it is best to remove it, although"
- echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
- [ echo "*** The test program failed to compile or link. See the file config.log for the"
- echo "*** exact error that occured. This usually means ESD was incorrectly installed"
- echo "*** or that you have moved ESD since it was installed. In the latter case, you"
- echo "*** may want to edit the esd-config script: $ESD_CONFIG" ])
- CFLAGS="$ac_save_CFLAGS"
- LIBS="$ac_save_LIBS"
- AC_LANG_RESTORE
- fi
- fi
- ESD_CFLAGS=""
- ESD_LIBS=""
- ifelse([$3], , :, [$3])
- fi
- AC_SUBST(ESD_CFLAGS)
- AC_SUBST(ESD_LIBS)
- rm -f conf.esdtest
-])
-
-dnl AM_ESD_SUPPORTS_MULTIPLE_RECORD([ACTION-IF-SUPPORTS [, ACTION-IF-NOT-SUPPORTS]])
-dnl Test, whether esd supports multiple recording clients (version >=0.2.21)
-dnl
-AC_DEFUN([AM_ESD_SUPPORTS_MULTIPLE_RECORD],
-[dnl
- AC_MSG_NOTICE([whether installed esd version supports multiple recording clients])
- ac_save_ESD_CFLAGS="$ESD_CFLAGS"
- ac_save_ESD_LIBS="$ESD_LIBS"
- AM_PATH_ESD(0.2.21,
- ifelse([$1], , [
- AM_CONDITIONAL(ESD_SUPPORTS_MULTIPLE_RECORD, true)
- AC_DEFINE(ESD_SUPPORTS_MULTIPLE_RECORD, 1,
- [Define if you have esound with support of multiple recording clients.])],
- [$1]),
- ifelse([$2], , [AM_CONDITIONAL(ESD_SUPPORTS_MULTIPLE_RECORD, false)], [$2])
- if test "x$ac_save_ESD_CFLAGS" != x ; then
- ESD_CFLAGS="$ac_save_ESD_CFLAGS"
- fi
- if test "x$ac_save_ESD_LIBS" != x ; then
- ESD_LIBS="$ac_save_ESD_LIBS"
- fi
- )
-])
-
+++ /dev/null
-dnl Copyright 2005 Red Hat, Inc
-dnl
-dnl Permission to use, copy, modify, distribute, and sell this software and its
-dnl documentation for any purpose is hereby granted without fee, provided that
-dnl the above copyright notice appear in all copies and that both that
-dnl copyright notice and this permission notice appear in supporting
-dnl documentation.
-dnl
-dnl The above copyright notice and this permission notice shall be included
-dnl in all copies or substantial portions of the Software.
-dnl
-dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-dnl OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-dnl MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-dnl IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR
-dnl OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-dnl ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-dnl OTHER DEALINGS IN THE SOFTWARE.
-dnl
-dnl Except as contained in this notice, the name of the copyright holders shall
-dnl not be used in advertising or otherwise to promote the sale, use or
-dnl other dealings in this Software without prior written authorization
-dnl from the copyright holders.
-dnl
-
-# XAW_CHECK_XPRINT_SUPPORT()
-# --------------------------
-# Adds --enable/disable-xprint and selects the appropriate version of the Xaw
-# library. If neither --enable-xprint nor --disable-xprint are given,
-# the presence of an Xaw with Xprint support will be auto detected
-
-AC_DEFUN([XAW_CHECK_XPRINT_SUPPORT],[
- AC_ARG_ENABLE(xprint, AC_HELP_STRING([--enable-xprint], [Enable XPrint support]),
- [use_xprint=$enableval],[use_xprint=auto])
- if test "x$use_xprint" = "xyes"; then
- TMP_CHECK1=xaw8
- TMP_CHECK2=
- xaw_use_xprint=yes
- elif test "x$use_xprint" = "xno"; then
- TMP_CHECK1=xaw7
- TMP_CHECK2=
- xaw_use_xprint=no
- else
- TMP_CHECK1=xaw8
- TMP_CHECK2=xaw7
- xaw_use_xprint=yes
- fi
-
- PKG_CHECK_MODULES(TMP_XAW, $TMP_CHECK1, success=yes, success=no)
- if [[ ! -z $TMP_CHECK2 ]] ; then
- if test $success = no ; then
- PKG_CHECK_MODULES(TMP_XAW, $TMP_CHECK2, success=yes, success=no)
- xaw_use_xprint=no
- fi
- fi
-
- if test "x$success" = "xyes"; then
- $1_CFLAGS=$TMP_XAW_CFLAGS
- $1_LIBS=$TMP_XAW_LIBS
-
- AM_CONDITIONAL([XAW_USE_XPRINT], [test "x$xaw_use_xprint" = "xyes"])
- else
- AC_MSG_ERROR([No suitable version of Xaw found])
- fi
-])
+++ /dev/null
-# CFLAGS and library paths for XMMS
-# written 15 December 1999 by Ben Gertzfield <che@debian.org>
-
-dnl Usage:
-dnl AM_PATH_XMMS([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
-dnl
-dnl Example:
-dnl AM_PATH_XMMS(0.9.5.1, , AC_MSG_ERROR([*** XMMS >= 0.9.5.1 not installed - please install first ***]))
-dnl
-dnl Defines XMMS_CFLAGS, XMMS_LIBS, XMMS_DATA_DIR, XMMS_PLUGIN_DIR,
-dnl XMMS_VISUALIZATION_PLUGIN_DIR, XMMS_INPUT_PLUGIN_DIR,
-dnl XMMS_OUTPUT_PLUGIN_DIR, XMMS_GENERAL_PLUGIN_DIR, XMMS_EFFECT_PLUGIN_DIR,
-dnl and XMMS_VERSION for your plugin pleasure.
-dnl
-
-dnl XMMS_TEST_VERSION(AVAILABLE-VERSION, NEEDED-VERSION [, ACTION-IF-OKAY [, ACTION-IF-NOT-OKAY]])
-AC_DEFUN([XMMS_TEST_VERSION], [
-
-# Determine which version number is greater. Prints 2 to stdout if
-# the second number is greater, 1 if the first number is greater,
-# 0 if the numbers are equal.
-
-# Written 15 December 1999 by Ben Gertzfield <che@debian.org>
-# Revised 15 December 1999 by Jim Monty <monty@primenet.com>
-
- AC_PROG_AWK
- xmms_got_version=[` $AWK ' \
-BEGIN { \
- print vercmp(ARGV[1], ARGV[2]); \
-} \
- \
-function vercmp(ver1, ver2, ver1arr, ver2arr, \
- ver1len, ver2len, \
- ver1int, ver2int, len, i, p) { \
- \
- ver1len = split(ver1, ver1arr, /\./); \
- ver2len = split(ver2, ver2arr, /\./); \
- \
- len = ver1len > ver2len ? ver1len : ver2len; \
- \
- for (i = 1; i <= len; i++) { \
- p = 1000 ^ (len - i); \
- ver1int += ver1arr[i] * p; \
- ver2int += ver2arr[i] * p; \
- } \
- \
- if (ver1int < ver2int) \
- return 2; \
- else if (ver1int > ver2int) \
- return 1; \
- else \
- return 0; \
-}' $1 $2`]
-
- if test $xmms_got_version -eq 2; then # failure
- ifelse([$4], , :, $4)
- else # success!
- ifelse([$3], , :, $3)
- fi
-])
-
-AC_DEFUN([AM_PATH_XMMS],
-[
-AC_ARG_WITH(xmms-prefix,[ --with-xmms-prefix=PFX Prefix where XMMS is installed (optional)],
- xmms_config_prefix="$withval", xmms_config_prefix="")
-AC_ARG_WITH(xmms-exec-prefix,[ --with-xmms-exec-prefix=PFX Exec prefix where XMMS is installed (optional)],
- xmms_config_exec_prefix="$withval", xmms_config_exec_prefix="")
-
-if test x$xmms_config_exec_prefix != x; then
- xmms_config_args="$xmms_config_args --exec-prefix=$xmms_config_exec_prefix"
- if test x${XMMS_CONFIG+set} != xset; then
- XMMS_CONFIG=$xmms_config_exec_prefix/bin/xmms-config
- fi
-fi
-
-if test x$xmms_config_prefix != x; then
- xmms_config_args="$xmms_config_args --prefix=$xmms_config_prefix"
- if test x${XMMS_CONFIG+set} != xset; then
- XMMS_CONFIG=$xmms_config_prefix/bin/xmms-config
- fi
-fi
-
-AC_PATH_PROG(XMMS_CONFIG, xmms-config, no)
-min_xmms_version=ifelse([$1], ,0.9.5.1, $1)
-
-if test "$XMMS_CONFIG" = "no"; then
- no_xmms=yes
-else
- XMMS_CFLAGS=`$XMMS_CONFIG $xmms_config_args --cflags`
- XMMS_LIBS=`$XMMS_CONFIG $xmms_config_args --libs`
- XMMS_VERSION=`$XMMS_CONFIG $xmms_config_args --version`
- XMMS_DATA_DIR=`$XMMS_CONFIG $xmms_config_args --data-dir`
- XMMS_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --plugin-dir`
- XMMS_VISUALIZATION_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args \
- --visualization-plugin-dir`
- XMMS_INPUT_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --input-plugin-dir`
- XMMS_OUTPUT_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --output-plugin-dir`
- XMMS_EFFECT_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --effect-plugin-dir`
- XMMS_GENERAL_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --general-plugin-dir`
-
- XMMS_TEST_VERSION($XMMS_VERSION, $min_xmms_version, ,no_xmms=version)
-fi
-
-AC_MSG_CHECKING(for XMMS - version >= $min_xmms_version)
-
-if test "x$no_xmms" = x; then
- AC_MSG_RESULT(yes)
- ifelse([$2], , :, [$2])
-else
- AC_MSG_RESULT(no)
-
- if test "$XMMS_CONFIG" = "no" ; then
- echo "*** The xmms-config script installed by XMMS could not be found."
- echo "*** If XMMS was installed in PREFIX, make sure PREFIX/bin is in"
- echo "*** your path, or set the XMMS_CONFIG environment variable to the"
- echo "*** full path to xmms-config."
- else
- if test "$no_xmms" = "version"; then
- echo "*** An old version of XMMS, $XMMS_VERSION, was found."
- echo "*** You need a version of XMMS newer than $min_xmms_version."
- echo "*** The latest version of XMMS is always available from"
- echo "*** http://www.xmms.org/"
- echo "***"
-
- echo "*** If you have already installed a sufficiently new version, this error"
- echo "*** probably means that the wrong copy of the xmms-config shell script is"
- echo "*** being found. The easiest way to fix this is to remove the old version"
- echo "*** of XMMS, but you can also set the XMMS_CONFIG environment to point to the"
- echo "*** correct copy of xmms-config. (In this case, you will have to"
- echo "*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf"
- echo "*** so that the correct libraries are found at run-time)"
- fi
- fi
- XMMS_CFLAGS=""
- XMMS_LIBS=""
- ifelse([$3], , :, [$3])
-fi
-AC_SUBST(XMMS_CFLAGS)
-AC_SUBST(XMMS_LIBS)
-AC_SUBST(XMMS_VERSION)
-AC_SUBST(XMMS_DATA_DIR)
-AC_SUBST(XMMS_PLUGIN_DIR)
-AC_SUBST(XMMS_VISUALIZATION_PLUGIN_DIR)
-AC_SUBST(XMMS_INPUT_PLUGIN_DIR)
-AC_SUBST(XMMS_OUTPUT_PLUGIN_DIR)
-AC_SUBST(XMMS_GENERAL_PLUGIN_DIR)
-AC_SUBST(XMMS_EFFECT_PLUGIN_DIR)
-])
-
+++ /dev/null
-#
-# Copyright (C) 2010-2013 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=mm-macros
-PKG_VERSION:=0.9.6
-
-PKG_SOURCE_URL:=http://ftp.gnome.org/pub/GNOME/sources/mm-common/0.9
-PKG_SOURCE:=mm-common-$(PKG_VERSION).tar.xz
-PKG_MD5SUM:=3b23749ab39441c392c016ce74632678
-
-HOST_BUILD_DIR:=$(BUILD_DIR_HOST)/mm-common-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/host-build.mk
-
-define Host/Install
- $(INSTALL_DIR) $(STAGING_DIR_HOST)/share/aclocal
- $(INSTALL_DATA) $(HOST_BUILD_DIR)/macros/*.m4 $(STAGING_DIR_HOST)/share/aclocal/
-endef
-
-define Host/Clean
- -$(MAKE) -C $(HOST_BUILD_DIR) uninstall
- $(call Host/Clean/Default)
-endef
-
-$(eval $(call HostBuild))
+++ /dev/null
-#
-# Copyright (C) 2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=xfce-macros
-PKG_VERSION:=4.8.0
-
-PKG_SOURCE_URL:=http://archive.xfce.org/xfce/4.8/src
-PKG_SOURCE:=xfce4-dev-tools-$(PKG_VERSION).tar.bz2
-PKG_MD5SUM:=9591299c49d92d00ba47974c42a735fa
-
-HOST_BUILD_DIR:=$(BUILD_DIR_HOST)/xfce4-dev-tools-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/host-build.mk
-
-define Host/Configure
-endef
-
-define Host/Compile
-endef
-
-define Host/Install
- $(INSTALL_DIR) $(STAGING_DIR_HOST)/share/aclocal
- $(INSTALL_DATA) $(HOST_BUILD_DIR)/m4macros/*.m4 $(STAGING_DIR_HOST)/share/aclocal/
-endef
-
-$(eval $(call HostBuild))
+++ /dev/null
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=xorg-macros
-PKG_VERSION:=1.11.0
-
-PKG_SOURCE_URL:=http://xorg.freedesktop.org/releases/individual/util/
-PKG_SOURCE:=util-macros-$(PKG_VERSION).tar.bz2
-PKG_MD5SUM:=22d5cdff672450cb6902e0d68c200dcb
-
-HOST_BUILD_DIR:=$(BUILD_DIR_HOST)/util-macros-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/host-build.mk
-
-define Host/Install
- $(INSTALL_DIR) $(STAGING_DIR_HOST)/share/aclocal
- $(INSTALL_DATA) $(HOST_BUILD_DIR)/xorg-macros.m4 $(STAGING_DIR_HOST)/share/aclocal/
-endef
-
-define Host/Clean
- -$(MAKE) -C $(HOST_BUILD_DIR) uninstall
- $(call Host/Clean/Default)
-endef
-
-$(eval $(call HostBuild))
projects / openwrt / staging / ansuel.git / commitdiff