--- /dev/null
+--- /dev/null
++++ b/configs/mt7622_ubnt_unifi-6-lr_defconfig
+@@ -0,0 +1,138 @@
++CONFIG_ARM=y
++CONFIG_POSITION_INDEPENDENT=y
++CONFIG_ARCH_MEDIATEK=y
++CONFIG_TARGET_MT7622=y
++CONFIG_SYS_TEXT_BASE=0x41e00000
++CONFIG_SYS_MALLOC_F_LEN=0x4000
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_ENV_IS_IN_MTD=y
++CONFIG_ENV_MTD_NAME="nor0"
++CONFIG_ENV_SIZE_REDUND=0x0
++CONFIG_ENV_SIZE=0x1000
++CONFIG_ENV_OFFSET=0xc0000
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_BOARD_LATE_INIT=y
++CONFIG_RESET_BUTTON_SETTLE_DELAY=200
++CONFIG_BOOTP_SEND_HOSTNAME=y
++CONFIG_DEFAULT_ENV_FILE="ubnt_unifi-6-lr_env"
++CONFIG_DEBUG_UART_BASE=0x11002000
++CONFIG_DEBUG_UART_CLOCK=25000000
++CONFIG_DEFAULT_DEVICE_TREE="mt7622-ubnt-unifi-6-lr"
++CONFIG_DEBUG_UART=y
++CONFIG_SMBIOS_PRODUCT_NAME=""
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
++CONFIG_LOGLEVEL=7
++CONFIG_LOG=y
++CONFIG_DEFAULT_FDT_FILE="mt7622-ubnt-unifi-6-lr"
++CONFIG_SYS_PROMPT="MT7622> "
++# CONFIG_LEGACY_IMAGE_FORMAT is not set
++# CONFIG_BOOTM_PLAN9 is not set
++# CONFIG_BOOTM_RTEMS is not set
++# CONFIG_BOOTM_VXWORKS is not set
++# CONFIG_EFI is not set
++# CONFIG_EFI_LOADER is not set
++CONFIG_CMD_BOOTMENU=y
++# CONFIG_CMD_BOOTEFI is not set
++CONFIG_CMD_BOOTP=y
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_CDP=y
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_DNS=y
++CONFIG_CMD_ECHO=y
++# CONFIG_CMD_ELF is not set
++# CONFIG_CMD_BOOTEFI_BOOTMGR is not set
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++CONFIG_CMD_LINK_LOCAL=y
++# CONFIG_CMD_MBR is not set
++CONFIG_CMD_MTD=y
++CONFIG_CMD_MTDPART=y
++# CONFIG_CMD_PCI is not set
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_PXE=y
++CONFIG_CMD_SMC=y
++CONFIG_CMD_TFTPBOOT=y
++CONFIG_CMD_TFTPSRV=y
++# CONFIG_CMD_UNLZ4 is not set
++CONFIG_CMD_ASKENV=y
++# CONFIG_CMD_PSTORE is not set
++CONFIG_CMD_RARP=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_CMD_UUID=y
++CONFIG_DISPLAY_CPUINFO=y
++CONFIG_DM_ETH=y
++CONFIG_DM_ETH_PHY=y
++CONFIG_DM_GPIO=y
++CONFIG_DM_MDIO=y
++CONFIG_DM_MTD=y
++CONFIG_DM_REGULATOR=y
++CONFIG_DM_REGULATOR_FIXED=y
++CONFIG_DM_REGULATOR_GPIO=y
++# CONFIG_DM_MMC is not set
++CONFIG_DM_SERIAL=y
++CONFIG_DM_SPI=y
++CONFIG_DM_SPI_FLASH=y
++CONFIG_HUSH_PARSER=y
++# CONFIG_PARTITION_UUIDS is not set
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++# CONFIG_LED is not set
++# CONFIG_LZ4 is not set
++CONFIG_VERSION_VARIABLE=y
++CONFIG_NETCONSOLE=y
++CONFIG_REGMAP=y
++CONFIG_SYSCON=y
++CONFIG_CLK=y
++CONFIG_PHY=y
++CONFIG_PHY_FIXED=y
++CONFIG_PHYLIB_10G=y
++CONFIG_PHY_AQUANTIA=y
++CONFIG_PHY_ADDR_ENABLE=y
++CONFIG_PHY_ADDR=8
++CONFIG_MEDIATEK_ETH=y
++CONFIG_MTD=y
++# CONFIG_MMC is not set
++CONFIG_PINCTRL=y
++CONFIG_PINCONF=y
++CONFIG_PINCTRL_MT7622=y
++CONFIG_POWER_DOMAIN=y
++CONFIG_PRE_CONSOLE_BUFFER=y
++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
++CONFIG_MTK_POWER_DOMAIN=y
++CONFIG_RAM=y
++CONFIG_MTK_SERIAL=y
++CONFIG_SPI=y
++CONFIG_MTK_SNFI_SPI=y
++CONFIG_MTK_SNOR=y
++CONFIG_SYSRESET_WATCHDOG=y
++CONFIG_WDT_MTK=y
++CONFIG_HEXDUMP=y
++CONFIG_RANDOM_UUID=y
++CONFIG_REGEX=y
++CONFIG_SPI_FLASH=y
++CONFIG_SPI_FLASH_BAR=y
++CONFIG_SPI_FLASH_MTD=y
++CONFIG_SPI_FLASH_UNLOCK_ALL=y
++CONFIG_SPI_FLASH_EON=y
++CONFIG_SPI_FLASH_GIGADEVICE=y
++CONFIG_SPI_FLASH_MACRONIX=y
++CONFIG_SPI_FLASH_SPANSION=y
++CONFIG_SPI_FLASH_STMICRO=y
++CONFIG_SPI_FLASH_SST=y
++CONFIG_SPI_FLASH_WINBOND=y
++CONFIG_SPI_FLASH_XMC=y
+--- /dev/null
++++ b/arch/arm/dts/mt7622-ubnt-unifi-6-lr.dts
+@@ -0,0 +1,202 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2019 MediaTek Inc.
++ * Author: Sam Shih <sam.shih@mediatek.com>
++ */
++
++/dts-v1/;
++#include "mt7622.dtsi"
++#include "mt7622-u-boot.dtsi"
++
++/ {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ model = "mt7622-ubnt-unifi-6-lr";
++ compatible = "mediatek,mt7622", "ubnt,unifi-6-lr";
++
++ chosen {
++ stdout-path = &uart0;
++ tick-timer = &timer0;
++ };
++
++ aliases {
++ spi0 = &snor;
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ u-boot,dm-pre-reloc;
++
++ reset {
++ label = "reset";
++ gpios = <&gpio 62 GPIO_ACTIVE_LOW>;
++ u-boot,dm-pre-reloc;
++ };
++ };
++
++ memory@40000000 {
++ device_type = "memory";
++ reg = <0x40000000 0x20000000>;
++ };
++
++ reg_1p8v: regulator-1p8v {
++ compatible = "regulator-fixed";
++ regulator-name = "fixed-1.8V";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ reg_3p3v: regulator-3p3v {
++ compatible = "regulator-fixed";
++ regulator-name = "fixed-3.3V";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ reg_5v: regulator-5v {
++ compatible = "regulator-fixed";
++ regulator-name = "fixed-5V";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++};
++
++&pcie {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>;
++ status = "okay";
++
++ pcie@0,0 {
++ status = "okay";
++ };
++
++ pcie@1,0 {
++ status = "okay";
++ };
++};
++
++&pinctrl {
++ eth_pins: eth-pins {
++ mux {
++ function = "eth";
++ groups = "mdc_mdio", "rgmii_via_gmac2";
++ };
++ };
++
++ pcie0_pins: pcie0-pins {
++ mux {
++ function = "pcie";
++ groups = "pcie0_pad_perst",
++ "pcie0_1_waken",
++ "pcie0_1_clkreq";
++ };
++ };
++
++ pcie1_pins: pcie1-pins {
++ mux {
++ function = "pcie";
++ groups = "pcie1_pad_perst",
++ "pcie1_0_waken",
++ "pcie1_0_clkreq";
++ };
++ };
++
++ snfi_pins: snfi-pins {
++ mux {
++ function = "flash";
++ groups = "snfi";
++ };
++ };
++
++ snor_pins: snor-pins {
++ mux {
++ function = "flash";
++ groups = "spi_nor";
++ };
++ };
++
++ uart0_pins: uart0 {
++ mux {
++ function = "uart";
++ groups = "uart0_0_tx_rx" ;
++ };
++ };
++
++ watchdog_pins: watchdog-default {
++ mux {
++ function = "watchdog";
++ groups = "watchdog";
++ };
++ };
++};
++
++&snfi {
++ pinctrl-names = "default", "snfi";
++ pinctrl-0 = <&snor_pins>;
++ pinctrl-1 = <&snfi_pins>;
++ status = "okay";
++
++ spi-flash@0 {
++ compatible = "jedec,spi-nor";
++ reg = <0>;
++ u-boot,dm-pre-reloc;
++ };
++};
++
++&snor {
++ pinctrl-names = "default";
++ pinctrl-0 = <&snor_pins>;
++ status = "okay";
++
++ spi-flash@0 {
++ compatible = "jedec,spi-nor";
++ reg = <0>;
++ spi-tx-bus-width = <1>;
++ spi-rx-bus-width = <4>;
++ u-boot,dm-pre-reloc;
++ };
++};
++
++&uart0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pins>;
++ status = "okay";
++};
++
++&watchdog {
++ pinctrl-names = "default";
++ pinctrl-0 = <&watchdog_pins>;
++ status = "okay";
++};
++
++ð {
++ status = "okay";
++ pinctrl-names = "default";
++ pinctrl-0 = <ð_pins>;
++
++ mediatek,gmac-id = <0>;
++ phy-mode = "sgmii";
++ phy-handle = <&gphy>;
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++
++ mdio-bus {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ gphy: ethernet-phy@8 {
++ /* Marvell AQRate AQR112W - no driver */
++ compatible = "ethernet-phy-ieee802.3-c45";
++ reg = <0x8>;
++ };
++ };
++};
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -1008,6 +1008,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
+ mt7623a-unielec-u7623-02-emmc.dtb \
+ mt7622-bananapi-bpi-r64.dtb \
+ mt7622-linksys-e8450-ubi.dtb \
++ mt7622-ubnt-unifi-6-lr.dtb \
+ mt7623n-bananapi-bpi-r2.dtb \
+ mt7629-rfb.dtb \
+ mt8512-bm1-emmc.dtb \
+--- /dev/null
++++ b/ubnt_unifi-6-lr_env
+@@ -0,0 +1,51 @@
++mtdparts=nor0:128k(bl2),640k(fip),64k(u-boot-env),256k(factory),64k(eeprom),15232k(recovery),-(firmware)
++ethaddr_factory=mtd read nor0 $loadaddr 0x110000 0x10000 && env readmem -b ethaddr $loadaddr 0x6 ; setenv ethaddr_factory
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x40080000
++bootcmd=run boot_nor
++bootdelay=0
++bootfile=openwrt-mediatek-mt7622-ubnt_unifi-6-lr-ubootmod-initramfs-recovery.itb
++bootfile_bl2=openwrt-mediatek-mt7622-ubnt_unifi-6-lr-ubootmod-preloader.bin
++bootfile_fip=openwrt-mediatek-mt7622-ubnt_unifi-6-lr-ubootmod-bl31-uboot.fip
++bootfile_upg=openwrt-mediatek-mt7622-ubnt_unifi-6-lr-ubootmod-squashfs-sysupgrade.itb
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title= \e[0;34m( ( ( \e[1;39mOpenWrt\e[0;34m ) ) )\e[0m
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot production system from flash.=run boot_production ; run bootmenu_confirm_return
++bootmenu_3=Boot recovery system from flash.=run boot_recovery ; run bootmenu_confirm_return
++bootmenu_4=Load production system via TFTP then write to flash.=setenv noboot 1 ; run boot_tftp_production ; setenv noboot ; run bootmenu_confirm_return
++bootmenu_5=Load recovery system via TFTP then write to flash.=setenv noboot 1 ; run boot_tftp_recovery ; setenv noboot ; run bootmenu_confirm_return
++bootmenu_6=\e[31mLoad BL31+U-Boot FIP via TFTP then write to flash.\e[0m=run boot_tftp_write_fip ; run bootmenu_confirm_return
++bootmenu_7=\e[31mLoad BL2 preloader via TFTP then write to flash.\e[0m=run boot_tftp_write_preloader ; run bootmenu_confirm_return
++bootmenu_8=Reboot.=reset
++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
++boot_first=if button reset ; then run boot_tftp_forever ; fi ; bootmenu
++boot_default=run bootcmd ; run boot_recovery ; run boot_tftp_forever
++boot_production=run nor_read_production && bootm $loadaddr
++boot_production_or_recovery=run boot_production ; run boot_recovery
++boot_recovery=run nor_read_recovery ; bootm $loadaddr
++boot_serial_write_fip=loadx $loadaddr 115200 && run boot_write_fip
++boot_serial_write_preloader=loadx $loadaddr 115200 && run boot_write_preloader
++boot_tftp_forever=while true ; do run boot_tftp_recovery ; sleep 1 ; done
++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && iminfo $loadaddr && run nor_write_production ; if env exists noboot ; then else bootm $loadaddr ; fi
++boot_tftp_recovery=tftpboot $loadaddr $bootfile && iminfo $loadaddr && run nor_write_recovery ; if env exists noboot ; then else bootm $loadaddr ; fi
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run boot_write_fip
++boot_tftp_write_preloader=tftpboot $loadaddr $bootfile_bl2 && run boot_write_preloader
++boot_nor=run boot_production_or_recovery
++boot_write_fip=mtd erase nor0 0x20000 0x80000 && mtd write nor0 $loadaddr 0x20000 0x80000
++boot_write_preloader=mtd erase nor0 0x0 0x20000 && mtd write nor0 $loadaddr 0x0 0x20000
++reset_factory=mtd erase nor0 0xc0000 0x10000 && reset
++nor_read_production=mtd read nor0 $loadaddr 0x1000000 0x1000 && imsz $loadaddr image_size && mtd read nor0 $loadaddr 0x1000000 $image_size
++nor_read_recovery=mtd read nor0 $loadaddr 0x120000 0x1000 && imsz $loadaddr image_size && mtd read nor0 $loadaddr 0x120000 $image_size
++nor_write_production=mtd write nor0 $loadaddr 0x1000000 $filesize
++nor_write_recovery=mtd write nor0 $loadaddr 0x120000 $filesize
++_init_env=setenv _init_env ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run ethaddr_factory ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title \e[33m$ver\e[0m"
+--- a/common/board_r.c
++++ b/common/board_r.c
+@@ -77,6 +77,7 @@
+ #ifdef CONFIG_EFI_SETUP_EARLY
+ #include <efi_loader.h>
+ #endif
++#include <spi_flash.h>
+
+ DECLARE_GLOBAL_DATA_PTR;
+
+@@ -410,6 +411,21 @@ static int initr_onenand(void)
+ }
+ #endif
+
++#if defined(CONFIG_SPI_FLASH)
++/* probe SPI FLASH */
++static int initr_spiflash(void)
++{
++ struct udevice *new;
++
++ spi_flash_probe_bus_cs(CONFIG_SF_DEFAULT_BUS,
++ CONFIG_SF_DEFAULT_CS,
++ CONFIG_SF_DEFAULT_SPEED,
++ CONFIG_SF_DEFAULT_MODE,
++ &new);
++ return 0;
++}
++#endif
++
+ #ifdef CONFIG_MMC
+ static int initr_mmc(void)
+ {
+@@ -697,6 +713,9 @@ static init_fnc_t init_sequence_r[] = {
+ #ifdef CONFIG_CMD_ONENAND
+ initr_onenand,
+ #endif
++#ifdef CONFIG_SPI_FLASH
++ initr_spiflash,
++#endif
+ #ifdef CONFIG_MMC
+ initr_mmc,
+ #endif
projects / openwrt / staging / ynezz.git / commitdiff