include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
-PKG_VERSION:=2018.11
+PKG_VERSION:=2019.01
-PKG_HASH:=737c93f2ea03fec669e840dbee32bcf6238e6924ff5f20e4f1c472ee24e5d37e
+PKG_HASH:=50bd7e5a466ab828914d080d5f6a432345b500e8fba1ad3b7b61e95e60d51c22
PKG_MAINTAINER:=Zoltan HERPAI <wigyori@uid0.hu>
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
-@@ -306,6 +306,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
+@@ -313,6 +313,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
sun6i-a31-m9.dtb \
sun6i-a31-mele-a1000g-quad.dtb \
sun6i-a31-mixtile-loftq.dtb \
+CONFIG_SUNXI_SPI=y
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
-@@ -872,6 +872,14 @@ config VIDEO_LCD_PANEL_I2C_SCL
+@@ -875,6 +875,14 @@ config VIDEO_LCD_PANEL_I2C_SCL
Set the SCL pin for the LCD i2c interface. This takes a string in the
format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
CONFIG_SUN7I_GMAC=y
+CONFIG_GMAC_TX_DELAY=1
CONFIG_AXP_ALDO3_VOLT=2800
- CONFIG_AXP_ALDO4_VOLT=2800
- CONFIG_SCSI=y
+ CONFIG_AXP_ALDO3_VOLT_SLOPE_08=y
+ CONFIG_AXP_ALDO3_INRUSH_QUIRK=y
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
-@@ -535,6 +535,14 @@ config SYS_BOARD
+@@ -538,6 +538,14 @@ config SYS_BOARD
config SYS_SOC
default "sunxi"
--- a/Makefile
+++ b/Makefile
-@@ -1255,8 +1255,10 @@ endif
+@@ -1344,8 +1344,10 @@ endif
ifneq ($(CONFIG_ARCH_SUNXI),)
ifeq ($(CONFIG_ARM64),)
$(call if_changed,cat)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
-@@ -820,7 +820,6 @@ config ARCH_SOCFPGA
+@@ -842,7 +842,6 @@ config ARCH_SOCFPGA
config ARCH_SUNXI
bool "Support sunxi (Allwinner) SoCs"