iwlwifi-objs += iwl-core.o iwl-eeprom.o iwl-power.o
iwlwifi-objs += iwl-scan.o iwl-led.o
-iwlwifi-objs += iwl-agn-rxon.o
+iwlwifi-objs += iwl-agn-rxon.o iwl-agn-devices.o
iwlwifi-objs += iwl-5000.o
iwlwifi-objs += iwl-6000.o
iwlwifi-objs += iwl-1000.o
*
*****************************************************************************/
-#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <net/mac80211.h>
-#include <linux/etherdevice.h>
-#include <asm/unaligned.h>
#include <linux/stringify.h>
-
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-io.h"
-#include "iwl-agn.h"
-#include "iwl-agn-hw.h"
-#include "iwl-shared.h"
+#include "iwl-config.h"
#include "iwl-cfg.h"
-#include "iwl-prph.h"
+#include "iwl-dev.h" /* still needed */
/* Highest firmware API version supported */
#define IWL1000_UCODE_API_MAX 6
#define IWL100_MODULE_FIRMWARE(api) IWL100_FW_PRE __stringify(api) ".ucode"
-/*
- * For 1000, use advance thermal throttling critical temperature threshold,
- * but legacy thermal management implementation for now.
- * This is for the reason of 1000 uCode using advance thermal throttling API
- * but not implement ct_kill_exit based on ct_kill exit temperature
- * so the thermal throttling will still based on legacy thermal throttling
- * management.
- * The code here need to be modified once 1000 uCode has the advanced thermal
- * throttling algorithm in place
- */
-static void iwl1000_set_ct_threshold(struct iwl_priv *priv)
-{
- /* want Celsius */
- priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
- priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
-}
-
-/* NIC configuration for 1000 series */
-static void iwl1000_nic_config(struct iwl_priv *priv)
-{
- /* set CSR_HW_CONFIG_REG for uCode use */
- iwl_set_bit(trans(priv), CSR_HW_IF_CONFIG_REG,
- CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
- CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
-
- /* Setting digital SVR for 1000 card to 1.32V */
- /* locking is acquired in iwl_set_bits_mask_prph() function */
- iwl_set_bits_mask_prph(trans(priv), APMG_DIGITAL_SVR_REG,
- APMG_SVR_DIGITAL_VOLTAGE_1_32,
- ~APMG_SVR_VOLTAGE_CONFIG_BIT_MSK);
-}
-
-static const struct iwl_sensitivity_ranges iwl1000_sensitivity = {
- .min_nrg_cck = 95,
- .auto_corr_min_ofdm = 90,
- .auto_corr_min_ofdm_mrc = 170,
- .auto_corr_min_ofdm_x1 = 120,
- .auto_corr_min_ofdm_mrc_x1 = 240,
-
- .auto_corr_max_ofdm = 120,
- .auto_corr_max_ofdm_mrc = 210,
- .auto_corr_max_ofdm_x1 = 155,
- .auto_corr_max_ofdm_mrc_x1 = 290,
-
- .auto_corr_min_cck = 125,
- .auto_corr_max_cck = 200,
- .auto_corr_min_cck_mrc = 170,
- .auto_corr_max_cck_mrc = 400,
- .nrg_th_cck = 95,
- .nrg_th_ofdm = 95,
-
- .barker_corr_th_min = 190,
- .barker_corr_th_min_mrc = 390,
- .nrg_th_cca = 62,
-};
-
-static void iwl1000_hw_set_hw_params(struct iwl_priv *priv)
-{
- priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ);
-
- priv->hw_params.tx_chains_num =
- num_of_ant(priv->hw_params.valid_tx_ant);
- if (cfg(priv)->rx_with_siso_diversity)
- priv->hw_params.rx_chains_num = 1;
- else
- priv->hw_params.rx_chains_num =
- num_of_ant(priv->hw_params.valid_rx_ant);
-
- iwl1000_set_ct_threshold(priv);
-
- /* Set initial sensitivity parameters */
- priv->hw_params.sens = &iwl1000_sensitivity;
-}
-
-static struct iwl_lib_ops iwl1000_lib = {
- .set_hw_params = iwl1000_hw_set_hw_params,
- .nic_config = iwl1000_nic_config,
- .eeprom_ops = {
- .regulatory_bands = {
- EEPROM_REG_BAND_1_CHANNELS,
- EEPROM_REG_BAND_2_CHANNELS,
- EEPROM_REG_BAND_3_CHANNELS,
- EEPROM_REG_BAND_4_CHANNELS,
- EEPROM_REG_BAND_5_CHANNELS,
- EEPROM_REG_BAND_24_HT40_CHANNELS,
- EEPROM_REGULATORY_BAND_NO_HT40,
- },
- },
- .temperature = iwlagn_temperature,
-};
-
static const struct iwl_base_params iwl1000_base_params = {
.num_of_queues = IWLAGN_NUM_QUEUES,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.max_data_size = IWLAGN_RTC_DATA_SIZE, \
.eeprom_ver = EEPROM_1000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION, \
- .lib = &iwl1000_lib, \
.base_params = &iwl1000_base_params, \
.led_mode = IWL_LED_BLINK
.max_data_size = IWLAGN_RTC_DATA_SIZE, \
.eeprom_ver = EEPROM_1000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION, \
- .lib = &iwl1000_lib, \
.base_params = &iwl1000_base_params, \
.led_mode = IWL_LED_RF_STATE, \
.rx_with_siso_diversity = true
*
*****************************************************************************/
-#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <net/mac80211.h>
-#include <linux/etherdevice.h>
-#include <asm/unaligned.h>
#include <linux/stringify.h>
-
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-io.h"
-#include "iwl-agn.h"
-#include "iwl-agn-hw.h"
-#include "iwl-shared.h"
+#include "iwl-config.h"
#include "iwl-cfg.h"
+#include "iwl-dev.h" /* still needed */
/* Highest firmware API version supported */
#define IWL2030_UCODE_API_MAX 6
#define IWL135_FW_PRE "iwlwifi-135-"
#define IWL135_MODULE_FIRMWARE(api) IWL135_FW_PRE __stringify(api) ".ucode"
-static void iwl2000_set_ct_threshold(struct iwl_priv *priv)
-{
- /* want Celsius */
- priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
- priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
-}
-
-/* NIC configuration for 2000 series */
-static void iwl2000_nic_config(struct iwl_priv *priv)
-{
- iwl_rf_config(priv);
-
- iwl_set_bit(trans(priv), CSR_GP_DRIVER_REG,
- CSR_GP_DRIVER_REG_BIT_RADIO_IQ_INVER);
-}
-
-static const struct iwl_sensitivity_ranges iwl2000_sensitivity = {
- .min_nrg_cck = 97,
- .auto_corr_min_ofdm = 80,
- .auto_corr_min_ofdm_mrc = 128,
- .auto_corr_min_ofdm_x1 = 105,
- .auto_corr_min_ofdm_mrc_x1 = 192,
-
- .auto_corr_max_ofdm = 145,
- .auto_corr_max_ofdm_mrc = 232,
- .auto_corr_max_ofdm_x1 = 110,
- .auto_corr_max_ofdm_mrc_x1 = 232,
-
- .auto_corr_min_cck = 125,
- .auto_corr_max_cck = 175,
- .auto_corr_min_cck_mrc = 160,
- .auto_corr_max_cck_mrc = 310,
- .nrg_th_cck = 97,
- .nrg_th_ofdm = 100,
-
- .barker_corr_th_min = 190,
- .barker_corr_th_min_mrc = 390,
- .nrg_th_cca = 62,
-};
-
-static void iwl2000_hw_set_hw_params(struct iwl_priv *priv)
-{
- priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ);
-
- priv->hw_params.tx_chains_num =
- num_of_ant(priv->hw_params.valid_tx_ant);
- if (cfg(priv)->rx_with_siso_diversity)
- priv->hw_params.rx_chains_num = 1;
- else
- priv->hw_params.rx_chains_num =
- num_of_ant(priv->hw_params.valid_rx_ant);
-
- iwl2000_set_ct_threshold(priv);
-
- /* Set initial sensitivity parameters */
- priv->hw_params.sens = &iwl2000_sensitivity;
-}
-
-static struct iwl_lib_ops iwl2000_lib = {
- .set_hw_params = iwl2000_hw_set_hw_params,
- .nic_config = iwl2000_nic_config,
- .eeprom_ops = {
- .regulatory_bands = {
- EEPROM_REG_BAND_1_CHANNELS,
- EEPROM_REG_BAND_2_CHANNELS,
- EEPROM_REG_BAND_3_CHANNELS,
- EEPROM_REG_BAND_4_CHANNELS,
- EEPROM_REG_BAND_5_CHANNELS,
- EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
- EEPROM_REGULATORY_BAND_NO_HT40,
- },
- .enhanced_txpower = true,
- },
- .temperature = iwlagn_temperature,
-};
-
-static struct iwl_lib_ops iwl2030_lib = {
- .set_hw_params = iwl2000_hw_set_hw_params,
- .nic_config = iwl2000_nic_config,
- .eeprom_ops = {
- .regulatory_bands = {
- EEPROM_REG_BAND_1_CHANNELS,
- EEPROM_REG_BAND_2_CHANNELS,
- EEPROM_REG_BAND_3_CHANNELS,
- EEPROM_REG_BAND_4_CHANNELS,
- EEPROM_REG_BAND_5_CHANNELS,
- EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
- EEPROM_REGULATORY_BAND_NO_HT40,
- },
- .enhanced_txpower = true,
- },
- .temperature = iwlagn_temperature,
-};
-
static const struct iwl_base_params iwl2000_base_params = {
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.num_of_queues = IWLAGN_NUM_QUEUES,
.max_data_size = IWL60_RTC_DATA_SIZE, \
.eeprom_ver = EEPROM_2000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION, \
- .lib = &iwl2000_lib, \
.base_params = &iwl2000_base_params, \
.need_temp_offset_calib = true, \
.temp_offset_v2 = true, \
.max_data_size = IWL60_RTC_DATA_SIZE, \
.eeprom_ver = EEPROM_2000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION, \
- .lib = &iwl2030_lib, \
.base_params = &iwl2030_base_params, \
.bt_params = &iwl2030_bt_params, \
.need_temp_offset_calib = true, \
.max_data_size = IWL60_RTC_DATA_SIZE, \
.eeprom_ver = EEPROM_2000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION, \
- .lib = &iwl2000_lib, \
.base_params = &iwl2000_base_params, \
.need_temp_offset_calib = true, \
.temp_offset_v2 = true, \
.max_data_size = IWL60_RTC_DATA_SIZE, \
.eeprom_ver = EEPROM_2000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION, \
- .lib = &iwl2030_lib, \
.base_params = &iwl2030_base_params, \
.bt_params = &iwl2030_bt_params, \
.need_temp_offset_calib = true, \
*
*****************************************************************************/
-#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <net/mac80211.h>
-#include <linux/etherdevice.h>
-#include <asm/unaligned.h>
#include <linux/stringify.h>
-
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-io.h"
-#include "iwl-agn.h"
-#include "iwl-agn-hw.h"
-#include "iwl-trans.h"
-#include "iwl-shared.h"
+#include "iwl-config.h"
#include "iwl-cfg.h"
-#include "iwl-prph.h"
+#include "iwl-dev.h" /* still needed */
/* Highest firmware API version supported */
#define IWL5000_UCODE_API_MAX 5
#define IWL5150_FW_PRE "iwlwifi-5150-"
#define IWL5150_MODULE_FIRMWARE(api) IWL5150_FW_PRE __stringify(api) ".ucode"
-/* NIC configuration for 5000 series */
-static void iwl5000_nic_config(struct iwl_priv *priv)
-{
- iwl_rf_config(priv);
-
- /* W/A : NIC is stuck in a reset state after Early PCIe power off
- * (PCIe power is lost before PERST# is asserted),
- * causing ME FW to lose ownership and not being able to obtain it back.
- */
- iwl_set_bits_mask_prph(trans(priv), APMG_PS_CTRL_REG,
- APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS,
- ~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS);
-}
-
-static const struct iwl_sensitivity_ranges iwl5000_sensitivity = {
- .min_nrg_cck = 100,
- .auto_corr_min_ofdm = 90,
- .auto_corr_min_ofdm_mrc = 170,
- .auto_corr_min_ofdm_x1 = 105,
- .auto_corr_min_ofdm_mrc_x1 = 220,
-
- .auto_corr_max_ofdm = 120,
- .auto_corr_max_ofdm_mrc = 210,
- .auto_corr_max_ofdm_x1 = 120,
- .auto_corr_max_ofdm_mrc_x1 = 240,
-
- .auto_corr_min_cck = 125,
- .auto_corr_max_cck = 200,
- .auto_corr_min_cck_mrc = 200,
- .auto_corr_max_cck_mrc = 400,
- .nrg_th_cck = 100,
- .nrg_th_ofdm = 100,
-
- .barker_corr_th_min = 190,
- .barker_corr_th_min_mrc = 390,
- .nrg_th_cca = 62,
-};
-
-static struct iwl_sensitivity_ranges iwl5150_sensitivity = {
- .min_nrg_cck = 95,
- .auto_corr_min_ofdm = 90,
- .auto_corr_min_ofdm_mrc = 170,
- .auto_corr_min_ofdm_x1 = 105,
- .auto_corr_min_ofdm_mrc_x1 = 220,
-
- .auto_corr_max_ofdm = 120,
- .auto_corr_max_ofdm_mrc = 210,
- /* max = min for performance bug in 5150 DSP */
- .auto_corr_max_ofdm_x1 = 105,
- .auto_corr_max_ofdm_mrc_x1 = 220,
-
- .auto_corr_min_cck = 125,
- .auto_corr_max_cck = 200,
- .auto_corr_min_cck_mrc = 170,
- .auto_corr_max_cck_mrc = 400,
- .nrg_th_cck = 95,
- .nrg_th_ofdm = 95,
-
- .barker_corr_th_min = 190,
- .barker_corr_th_min_mrc = 390,
- .nrg_th_cca = 62,
-};
-
-#define IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF (-5)
-
-static s32 iwl_temp_calib_to_offset(struct iwl_priv *priv)
-{
- u16 temperature, voltage;
- __le16 *temp_calib = (__le16 *)iwl_eeprom_query_addr(priv,
- EEPROM_KELVIN_TEMPERATURE);
-
- temperature = le16_to_cpu(temp_calib[0]);
- voltage = le16_to_cpu(temp_calib[1]);
-
- /* offset = temp - volt / coeff */
- return (s32)(temperature - voltage / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF);
-}
-
-static void iwl5150_set_ct_threshold(struct iwl_priv *priv)
-{
- const s32 volt2temp_coef = IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF;
- s32 threshold = (s32)CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY) -
- iwl_temp_calib_to_offset(priv);
-
- priv->hw_params.ct_kill_threshold = threshold * volt2temp_coef;
-}
-
-static void iwl5000_set_ct_threshold(struct iwl_priv *priv)
-{
- /* want Celsius */
- priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
-}
-
-static void iwl5000_hw_set_hw_params(struct iwl_priv *priv)
-{
- priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
- BIT(IEEE80211_BAND_5GHZ);
-
- priv->hw_params.tx_chains_num =
- num_of_ant(priv->hw_params.valid_tx_ant);
- priv->hw_params.rx_chains_num =
- num_of_ant(priv->hw_params.valid_rx_ant);
-
- iwl5000_set_ct_threshold(priv);
-
- /* Set initial sensitivity parameters */
- priv->hw_params.sens = &iwl5000_sensitivity;
-}
-
-static void iwl5150_hw_set_hw_params(struct iwl_priv *priv)
-{
- priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
- BIT(IEEE80211_BAND_5GHZ);
-
- priv->hw_params.tx_chains_num =
- num_of_ant(priv->hw_params.valid_tx_ant);
- priv->hw_params.rx_chains_num =
- num_of_ant(priv->hw_params.valid_rx_ant);
-
- iwl5150_set_ct_threshold(priv);
-
- /* Set initial sensitivity parameters */
- priv->hw_params.sens = &iwl5150_sensitivity;
-}
-
-static void iwl5150_temperature(struct iwl_priv *priv)
-{
- u32 vt = 0;
- s32 offset = iwl_temp_calib_to_offset(priv);
-
- vt = le32_to_cpu(priv->statistics.common.temperature);
- vt = vt / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF + offset;
- /* now vt hold the temperature in Kelvin */
- priv->temperature = KELVIN_TO_CELSIUS(vt);
- iwl_tt_handler(priv);
-}
-
-static int iwl5000_hw_channel_switch(struct iwl_priv *priv,
- struct ieee80211_channel_switch *ch_switch)
-{
- /*
- * MULTI-FIXME
- * See iwlagn_mac_channel_switch.
- */
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- struct iwl5000_channel_switch_cmd cmd;
- const struct iwl_channel_info *ch_info;
- u32 switch_time_in_usec, ucode_switch_time;
- u16 ch;
- u32 tsf_low;
- u8 switch_count;
- u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
- struct ieee80211_vif *vif = ctx->vif;
- struct iwl_host_cmd hcmd = {
- .id = REPLY_CHANNEL_SWITCH,
- .len = { sizeof(cmd), },
- .flags = CMD_SYNC,
- .data = { &cmd, },
- };
-
- cmd.band = priv->band == IEEE80211_BAND_2GHZ;
- ch = ch_switch->channel->hw_value;
- IWL_DEBUG_11H(priv, "channel switch from %d to %d\n",
- ctx->active.channel, ch);
- cmd.channel = cpu_to_le16(ch);
- cmd.rxon_flags = ctx->staging.flags;
- cmd.rxon_filter_flags = ctx->staging.filter_flags;
- switch_count = ch_switch->count;
- tsf_low = ch_switch->timestamp & 0x0ffffffff;
- /*
- * calculate the ucode channel switch time
- * adding TSF as one of the factor for when to switch
- */
- if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
- if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
- beacon_interval)) {
- switch_count -= (priv->ucode_beacon_time -
- tsf_low) / beacon_interval;
- } else
- switch_count = 0;
- }
- if (switch_count <= 1)
- cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
- else {
- switch_time_in_usec =
- vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
- ucode_switch_time = iwl_usecs_to_beacons(priv,
- switch_time_in_usec,
- beacon_interval);
- cmd.switch_time = iwl_add_beacon_time(priv,
- priv->ucode_beacon_time,
- ucode_switch_time,
- beacon_interval);
- }
- IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
- cmd.switch_time);
- ch_info = iwl_get_channel_info(priv, priv->band, ch);
- if (ch_info)
- cmd.expect_beacon = is_channel_radar(ch_info);
- else {
- IWL_ERR(priv, "invalid channel switch from %u to %u\n",
- ctx->active.channel, ch);
- return -EFAULT;
- }
-
- return iwl_dvm_send_cmd(priv, &hcmd);
-}
-
-static struct iwl_lib_ops iwl5000_lib = {
- .set_hw_params = iwl5000_hw_set_hw_params,
- .set_channel_switch = iwl5000_hw_channel_switch,
- .nic_config = iwl5000_nic_config,
- .eeprom_ops = {
- .regulatory_bands = {
- EEPROM_REG_BAND_1_CHANNELS,
- EEPROM_REG_BAND_2_CHANNELS,
- EEPROM_REG_BAND_3_CHANNELS,
- EEPROM_REG_BAND_4_CHANNELS,
- EEPROM_REG_BAND_5_CHANNELS,
- EEPROM_REG_BAND_24_HT40_CHANNELS,
- EEPROM_REG_BAND_52_HT40_CHANNELS
- },
- },
- .temperature = iwlagn_temperature,
-};
-
-static struct iwl_lib_ops iwl5150_lib = {
- .set_hw_params = iwl5150_hw_set_hw_params,
- .set_channel_switch = iwl5000_hw_channel_switch,
- .nic_config = iwl5000_nic_config,
- .eeprom_ops = {
- .regulatory_bands = {
- EEPROM_REG_BAND_1_CHANNELS,
- EEPROM_REG_BAND_2_CHANNELS,
- EEPROM_REG_BAND_3_CHANNELS,
- EEPROM_REG_BAND_4_CHANNELS,
- EEPROM_REG_BAND_5_CHANNELS,
- EEPROM_REG_BAND_24_HT40_CHANNELS,
- EEPROM_REG_BAND_52_HT40_CHANNELS
- },
- },
- .temperature = iwl5150_temperature,
-};
-
static const struct iwl_base_params iwl5000_base_params = {
.eeprom_size = IWLAGN_EEPROM_IMG_SIZE,
.num_of_queues = IWLAGN_NUM_QUEUES,
.max_data_size = IWLAGN_RTC_DATA_SIZE, \
.eeprom_ver = EEPROM_5000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION, \
- .lib = &iwl5000_lib, \
.base_params = &iwl5000_base_params, \
.led_mode = IWL_LED_BLINK
.max_data_size = IWLAGN_RTC_DATA_SIZE,
.eeprom_ver = EEPROM_5050_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
- .lib = &iwl5000_lib,
.base_params = &iwl5000_base_params,
.ht_params = &iwl5000_ht_params,
.led_mode = IWL_LED_BLINK,
.max_data_size = IWLAGN_RTC_DATA_SIZE, \
.eeprom_ver = EEPROM_5050_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION, \
- .lib = &iwl5150_lib, \
.base_params = &iwl5000_base_params, \
.no_xtal_calib = true, \
.led_mode = IWL_LED_BLINK, \
*
*****************************************************************************/
-#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <net/mac80211.h>
-#include <linux/etherdevice.h>
-#include <asm/unaligned.h>
#include <linux/stringify.h>
-
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-io.h"
-#include "iwl-agn.h"
-#include "iwl-agn-hw.h"
-#include "iwl-trans.h"
-#include "iwl-shared.h"
+#include "iwl-config.h"
#include "iwl-cfg.h"
+#include "iwl-dev.h" /* still needed */
/* Highest firmware API version supported */
#define IWL6000_UCODE_API_MAX 6
#define IWL6030_FW_PRE "iwlwifi-6000g2b-"
#define IWL6030_MODULE_FIRMWARE(api) IWL6030_FW_PRE __stringify(api) ".ucode"
-static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
-{
- /* want Celsius */
- priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
- priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
-}
-
-/* NIC configuration for 6000 series */
-static void iwl6000_nic_config(struct iwl_priv *priv)
-{
- iwl_rf_config(priv);
-
- switch (cfg(priv)->device_family) {
- case IWL_DEVICE_FAMILY_6005:
- case IWL_DEVICE_FAMILY_6030:
- case IWL_DEVICE_FAMILY_6000:
- break;
- case IWL_DEVICE_FAMILY_6000i:
- /* 2x2 IPA phy type */
- iwl_write32(trans(priv), CSR_GP_DRIVER_REG,
- CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
- break;
- case IWL_DEVICE_FAMILY_6050:
- /* Indicate calibration version to uCode. */
- if (iwl_eeprom_calib_version(priv) >= 6)
- iwl_set_bit(trans(priv), CSR_GP_DRIVER_REG,
- CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
- break;
- case IWL_DEVICE_FAMILY_6150:
- /* Indicate calibration version to uCode. */
- if (iwl_eeprom_calib_version(priv) >= 6)
- iwl_set_bit(trans(priv), CSR_GP_DRIVER_REG,
- CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
- iwl_set_bit(trans(priv), CSR_GP_DRIVER_REG,
- CSR_GP_DRIVER_REG_BIT_6050_1x2);
- break;
- default:
- WARN_ON(1);
- }
-}
-
-static const struct iwl_sensitivity_ranges iwl6000_sensitivity = {
- .min_nrg_cck = 110,
- .auto_corr_min_ofdm = 80,
- .auto_corr_min_ofdm_mrc = 128,
- .auto_corr_min_ofdm_x1 = 105,
- .auto_corr_min_ofdm_mrc_x1 = 192,
-
- .auto_corr_max_ofdm = 145,
- .auto_corr_max_ofdm_mrc = 232,
- .auto_corr_max_ofdm_x1 = 110,
- .auto_corr_max_ofdm_mrc_x1 = 232,
-
- .auto_corr_min_cck = 125,
- .auto_corr_max_cck = 175,
- .auto_corr_min_cck_mrc = 160,
- .auto_corr_max_cck_mrc = 310,
- .nrg_th_cck = 110,
- .nrg_th_ofdm = 110,
-
- .barker_corr_th_min = 190,
- .barker_corr_th_min_mrc = 336,
- .nrg_th_cca = 62,
-};
-
-static void iwl6000_hw_set_hw_params(struct iwl_priv *priv)
-{
- priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
- BIT(IEEE80211_BAND_5GHZ);
-
- priv->hw_params.tx_chains_num =
- num_of_ant(priv->hw_params.valid_tx_ant);
- if (cfg(priv)->rx_with_siso_diversity)
- priv->hw_params.rx_chains_num = 1;
- else
- priv->hw_params.rx_chains_num =
- num_of_ant(priv->hw_params.valid_rx_ant);
-
- iwl6000_set_ct_threshold(priv);
-
- /* Set initial sensitivity parameters */
- priv->hw_params.sens = &iwl6000_sensitivity;
-
-}
-
-static int iwl6000_hw_channel_switch(struct iwl_priv *priv,
- struct ieee80211_channel_switch *ch_switch)
-{
- /*
- * MULTI-FIXME
- * See iwlagn_mac_channel_switch.
- */
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- struct iwl6000_channel_switch_cmd cmd;
- const struct iwl_channel_info *ch_info;
- u32 switch_time_in_usec, ucode_switch_time;
- u16 ch;
- u32 tsf_low;
- u8 switch_count;
- u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
- struct ieee80211_vif *vif = ctx->vif;
- struct iwl_host_cmd hcmd = {
- .id = REPLY_CHANNEL_SWITCH,
- .len = { sizeof(cmd), },
- .flags = CMD_SYNC,
- .data = { &cmd, },
- };
-
- cmd.band = priv->band == IEEE80211_BAND_2GHZ;
- ch = ch_switch->channel->hw_value;
- IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
- ctx->active.channel, ch);
- cmd.channel = cpu_to_le16(ch);
- cmd.rxon_flags = ctx->staging.flags;
- cmd.rxon_filter_flags = ctx->staging.filter_flags;
- switch_count = ch_switch->count;
- tsf_low = ch_switch->timestamp & 0x0ffffffff;
- /*
- * calculate the ucode channel switch time
- * adding TSF as one of the factor for when to switch
- */
- if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
- if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
- beacon_interval)) {
- switch_count -= (priv->ucode_beacon_time -
- tsf_low) / beacon_interval;
- } else
- switch_count = 0;
- }
- if (switch_count <= 1)
- cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
- else {
- switch_time_in_usec =
- vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
- ucode_switch_time = iwl_usecs_to_beacons(priv,
- switch_time_in_usec,
- beacon_interval);
- cmd.switch_time = iwl_add_beacon_time(priv,
- priv->ucode_beacon_time,
- ucode_switch_time,
- beacon_interval);
- }
- IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
- cmd.switch_time);
- ch_info = iwl_get_channel_info(priv, priv->band, ch);
- if (ch_info)
- cmd.expect_beacon = is_channel_radar(ch_info);
- else {
- IWL_ERR(priv, "invalid channel switch from %u to %u\n",
- ctx->active.channel, ch);
- return -EFAULT;
- }
-
- return iwl_dvm_send_cmd(priv, &hcmd);
-}
-
-static struct iwl_lib_ops iwl6000_lib = {
- .set_hw_params = iwl6000_hw_set_hw_params,
- .set_channel_switch = iwl6000_hw_channel_switch,
- .nic_config = iwl6000_nic_config,
- .eeprom_ops = {
- .regulatory_bands = {
- EEPROM_REG_BAND_1_CHANNELS,
- EEPROM_REG_BAND_2_CHANNELS,
- EEPROM_REG_BAND_3_CHANNELS,
- EEPROM_REG_BAND_4_CHANNELS,
- EEPROM_REG_BAND_5_CHANNELS,
- EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
- EEPROM_REG_BAND_52_HT40_CHANNELS
- },
- .enhanced_txpower = true,
- },
- .temperature = iwlagn_temperature,
-};
-
-static struct iwl_lib_ops iwl6030_lib = {
- .set_hw_params = iwl6000_hw_set_hw_params,
- .set_channel_switch = iwl6000_hw_channel_switch,
- .nic_config = iwl6000_nic_config,
- .eeprom_ops = {
- .regulatory_bands = {
- EEPROM_REG_BAND_1_CHANNELS,
- EEPROM_REG_BAND_2_CHANNELS,
- EEPROM_REG_BAND_3_CHANNELS,
- EEPROM_REG_BAND_4_CHANNELS,
- EEPROM_REG_BAND_5_CHANNELS,
- EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
- EEPROM_REG_BAND_52_HT40_CHANNELS
- },
- .enhanced_txpower = true,
- },
- .temperature = iwlagn_temperature,
-};
-
static const struct iwl_base_params iwl6000_base_params = {
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.num_of_queues = IWLAGN_NUM_QUEUES,
.max_data_size = IWL60_RTC_DATA_SIZE, \
.eeprom_ver = EEPROM_6005_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6005_TX_POWER_VERSION, \
- .lib = &iwl6000_lib, \
.base_params = &iwl6000_g2_base_params, \
.need_temp_offset_calib = true, \
.led_mode = IWL_LED_RF_STATE
.max_data_size = IWL60_RTC_DATA_SIZE, \
.eeprom_ver = EEPROM_6030_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION, \
- .lib = &iwl6030_lib, \
.base_params = &iwl6000_g2_base_params, \
.bt_params = &iwl6000_bt_params, \
.need_temp_offset_calib = true, \
.valid_rx_ant = ANT_BC, /* .cfg overwrite */ \
.eeprom_ver = EEPROM_6000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, \
- .lib = &iwl6000_lib, \
.base_params = &iwl6000_base_params, \
.led_mode = IWL_LED_BLINK
.max_data_size = IWL60_RTC_DATA_SIZE, \
.valid_tx_ant = ANT_AB, /* .cfg overwrite */ \
.valid_rx_ant = ANT_AB, /* .cfg overwrite */ \
- .lib = &iwl6000_lib, \
.eeprom_ver = EEPROM_6050_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION, \
.base_params = &iwl6050_base_params, \
.device_family = IWL_DEVICE_FAMILY_6150, \
.max_inst_size = IWL60_RTC_INST_SIZE, \
.max_data_size = IWL60_RTC_DATA_SIZE, \
- .lib = &iwl6000_lib, \
.eeprom_ver = EEPROM_6150_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION, \
.base_params = &iwl6050_base_params, \
.max_data_size = IWL60_RTC_DATA_SIZE,
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
- .lib = &iwl6000_lib,
.base_params = &iwl6000_base_params,
.ht_params = &iwl6000_ht_params,
.led_mode = IWL_LED_BLINK,
--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+/*
+ * DVM device-specific data & functions
+ */
+#include "iwl-core.h"
+#include "iwl-agn.h"
+#include "iwl-dev.h"
+#include "iwl-commands.h"
+#include "iwl-io.h"
+#include "iwl-prph.h"
+
+/*
+ * 1000 series
+ * ===========
+ */
+
+/*
+ * For 1000, use advance thermal throttling critical temperature threshold,
+ * but legacy thermal management implementation for now.
+ * This is for the reason of 1000 uCode using advance thermal throttling API
+ * but not implement ct_kill_exit based on ct_kill exit temperature
+ * so the thermal throttling will still based on legacy thermal throttling
+ * management.
+ * The code here need to be modified once 1000 uCode has the advanced thermal
+ * throttling algorithm in place
+ */
+static void iwl1000_set_ct_threshold(struct iwl_priv *priv)
+{
+ /* want Celsius */
+ priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
+ priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
+}
+
+/* NIC configuration for 1000 series */
+static void iwl1000_nic_config(struct iwl_priv *priv)
+{
+ /* set CSR_HW_CONFIG_REG for uCode use */
+ iwl_set_bit(trans(priv), CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
+ CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
+
+ /* Setting digital SVR for 1000 card to 1.32V */
+ /* locking is acquired in iwl_set_bits_mask_prph() function */
+ iwl_set_bits_mask_prph(trans(priv), APMG_DIGITAL_SVR_REG,
+ APMG_SVR_DIGITAL_VOLTAGE_1_32,
+ ~APMG_SVR_VOLTAGE_CONFIG_BIT_MSK);
+}
+
+static const struct iwl_sensitivity_ranges iwl1000_sensitivity = {
+ .min_nrg_cck = 95,
+ .auto_corr_min_ofdm = 90,
+ .auto_corr_min_ofdm_mrc = 170,
+ .auto_corr_min_ofdm_x1 = 120,
+ .auto_corr_min_ofdm_mrc_x1 = 240,
+
+ .auto_corr_max_ofdm = 120,
+ .auto_corr_max_ofdm_mrc = 210,
+ .auto_corr_max_ofdm_x1 = 155,
+ .auto_corr_max_ofdm_mrc_x1 = 290,
+
+ .auto_corr_min_cck = 125,
+ .auto_corr_max_cck = 200,
+ .auto_corr_min_cck_mrc = 170,
+ .auto_corr_max_cck_mrc = 400,
+ .nrg_th_cck = 95,
+ .nrg_th_ofdm = 95,
+
+ .barker_corr_th_min = 190,
+ .barker_corr_th_min_mrc = 390,
+ .nrg_th_cca = 62,
+};
+
+static void iwl1000_hw_set_hw_params(struct iwl_priv *priv)
+{
+ priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ);
+
+ priv->hw_params.tx_chains_num =
+ num_of_ant(priv->hw_params.valid_tx_ant);
+ if (cfg(priv)->rx_with_siso_diversity)
+ priv->hw_params.rx_chains_num = 1;
+ else
+ priv->hw_params.rx_chains_num =
+ num_of_ant(priv->hw_params.valid_rx_ant);
+
+ iwl1000_set_ct_threshold(priv);
+
+ /* Set initial sensitivity parameters */
+ priv->hw_params.sens = &iwl1000_sensitivity;
+}
+
+struct iwl_lib_ops iwl1000_lib = {
+ .set_hw_params = iwl1000_hw_set_hw_params,
+ .nic_config = iwl1000_nic_config,
+ .eeprom_ops = {
+ .regulatory_bands = {
+ EEPROM_REG_BAND_1_CHANNELS,
+ EEPROM_REG_BAND_2_CHANNELS,
+ EEPROM_REG_BAND_3_CHANNELS,
+ EEPROM_REG_BAND_4_CHANNELS,
+ EEPROM_REG_BAND_5_CHANNELS,
+ EEPROM_REG_BAND_24_HT40_CHANNELS,
+ EEPROM_REGULATORY_BAND_NO_HT40,
+ },
+ },
+ .temperature = iwlagn_temperature,
+};
+
+
+/*
+ * 2000 series
+ * ===========
+ */
+
+static void iwl2000_set_ct_threshold(struct iwl_priv *priv)
+{
+ /* want Celsius */
+ priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
+ priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
+}
+
+/* NIC configuration for 2000 series */
+static void iwl2000_nic_config(struct iwl_priv *priv)
+{
+ iwl_rf_config(priv);
+
+ iwl_set_bit(trans(priv), CSR_GP_DRIVER_REG,
+ CSR_GP_DRIVER_REG_BIT_RADIO_IQ_INVER);
+}
+
+static const struct iwl_sensitivity_ranges iwl2000_sensitivity = {
+ .min_nrg_cck = 97,
+ .auto_corr_min_ofdm = 80,
+ .auto_corr_min_ofdm_mrc = 128,
+ .auto_corr_min_ofdm_x1 = 105,
+ .auto_corr_min_ofdm_mrc_x1 = 192,
+
+ .auto_corr_max_ofdm = 145,
+ .auto_corr_max_ofdm_mrc = 232,
+ .auto_corr_max_ofdm_x1 = 110,
+ .auto_corr_max_ofdm_mrc_x1 = 232,
+
+ .auto_corr_min_cck = 125,
+ .auto_corr_max_cck = 175,
+ .auto_corr_min_cck_mrc = 160,
+ .auto_corr_max_cck_mrc = 310,
+ .nrg_th_cck = 97,
+ .nrg_th_ofdm = 100,
+
+ .barker_corr_th_min = 190,
+ .barker_corr_th_min_mrc = 390,
+ .nrg_th_cca = 62,
+};
+
+static void iwl2000_hw_set_hw_params(struct iwl_priv *priv)
+{
+ priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ);
+
+ priv->hw_params.tx_chains_num =
+ num_of_ant(priv->hw_params.valid_tx_ant);
+ if (cfg(priv)->rx_with_siso_diversity)
+ priv->hw_params.rx_chains_num = 1;
+ else
+ priv->hw_params.rx_chains_num =
+ num_of_ant(priv->hw_params.valid_rx_ant);
+
+ iwl2000_set_ct_threshold(priv);
+
+ /* Set initial sensitivity parameters */
+ priv->hw_params.sens = &iwl2000_sensitivity;
+}
+
+struct iwl_lib_ops iwl2000_lib = {
+ .set_hw_params = iwl2000_hw_set_hw_params,
+ .nic_config = iwl2000_nic_config,
+ .eeprom_ops = {
+ .regulatory_bands = {
+ EEPROM_REG_BAND_1_CHANNELS,
+ EEPROM_REG_BAND_2_CHANNELS,
+ EEPROM_REG_BAND_3_CHANNELS,
+ EEPROM_REG_BAND_4_CHANNELS,
+ EEPROM_REG_BAND_5_CHANNELS,
+ EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
+ EEPROM_REGULATORY_BAND_NO_HT40,
+ },
+ .enhanced_txpower = true,
+ },
+ .temperature = iwlagn_temperature,
+};
+
+struct iwl_lib_ops iwl2030_lib = {
+ .set_hw_params = iwl2000_hw_set_hw_params,
+ .nic_config = iwl2000_nic_config,
+ .eeprom_ops = {
+ .regulatory_bands = {
+ EEPROM_REG_BAND_1_CHANNELS,
+ EEPROM_REG_BAND_2_CHANNELS,
+ EEPROM_REG_BAND_3_CHANNELS,
+ EEPROM_REG_BAND_4_CHANNELS,
+ EEPROM_REG_BAND_5_CHANNELS,
+ EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
+ EEPROM_REGULATORY_BAND_NO_HT40,
+ },
+ .enhanced_txpower = true,
+ },
+ .temperature = iwlagn_temperature,
+};
+
+/*
+ * 5000 series
+ * ===========
+ */
+
+/* NIC configuration for 5000 series */
+static void iwl5000_nic_config(struct iwl_priv *priv)
+{
+ iwl_rf_config(priv);
+
+ /* W/A : NIC is stuck in a reset state after Early PCIe power off
+ * (PCIe power is lost before PERST# is asserted),
+ * causing ME FW to lose ownership and not being able to obtain it back.
+ */
+ iwl_set_bits_mask_prph(trans(priv), APMG_PS_CTRL_REG,
+ APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS,
+ ~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS);
+}
+
+static const struct iwl_sensitivity_ranges iwl5000_sensitivity = {
+ .min_nrg_cck = 100,
+ .auto_corr_min_ofdm = 90,
+ .auto_corr_min_ofdm_mrc = 170,
+ .auto_corr_min_ofdm_x1 = 105,
+ .auto_corr_min_ofdm_mrc_x1 = 220,
+
+ .auto_corr_max_ofdm = 120,
+ .auto_corr_max_ofdm_mrc = 210,
+ .auto_corr_max_ofdm_x1 = 120,
+ .auto_corr_max_ofdm_mrc_x1 = 240,
+
+ .auto_corr_min_cck = 125,
+ .auto_corr_max_cck = 200,
+ .auto_corr_min_cck_mrc = 200,
+ .auto_corr_max_cck_mrc = 400,
+ .nrg_th_cck = 100,
+ .nrg_th_ofdm = 100,
+
+ .barker_corr_th_min = 190,
+ .barker_corr_th_min_mrc = 390,
+ .nrg_th_cca = 62,
+};
+
+static struct iwl_sensitivity_ranges iwl5150_sensitivity = {
+ .min_nrg_cck = 95,
+ .auto_corr_min_ofdm = 90,
+ .auto_corr_min_ofdm_mrc = 170,
+ .auto_corr_min_ofdm_x1 = 105,
+ .auto_corr_min_ofdm_mrc_x1 = 220,
+
+ .auto_corr_max_ofdm = 120,
+ .auto_corr_max_ofdm_mrc = 210,
+ /* max = min for performance bug in 5150 DSP */
+ .auto_corr_max_ofdm_x1 = 105,
+ .auto_corr_max_ofdm_mrc_x1 = 220,
+
+ .auto_corr_min_cck = 125,
+ .auto_corr_max_cck = 200,
+ .auto_corr_min_cck_mrc = 170,
+ .auto_corr_max_cck_mrc = 400,
+ .nrg_th_cck = 95,
+ .nrg_th_ofdm = 95,
+
+ .barker_corr_th_min = 190,
+ .barker_corr_th_min_mrc = 390,
+ .nrg_th_cca = 62,
+};
+
+#define IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF (-5)
+
+static s32 iwl_temp_calib_to_offset(struct iwl_priv *priv)
+{
+ u16 temperature, voltage;
+ __le16 *temp_calib = (__le16 *)iwl_eeprom_query_addr(priv,
+ EEPROM_KELVIN_TEMPERATURE);
+
+ temperature = le16_to_cpu(temp_calib[0]);
+ voltage = le16_to_cpu(temp_calib[1]);
+
+ /* offset = temp - volt / coeff */
+ return (s32)(temperature -
+ voltage / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF);
+}
+
+static void iwl5150_set_ct_threshold(struct iwl_priv *priv)
+{
+ const s32 volt2temp_coef = IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF;
+ s32 threshold = (s32)CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY) -
+ iwl_temp_calib_to_offset(priv);
+
+ priv->hw_params.ct_kill_threshold = threshold * volt2temp_coef;
+}
+
+static void iwl5000_set_ct_threshold(struct iwl_priv *priv)
+{
+ /* want Celsius */
+ priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
+}
+
+static void iwl5000_hw_set_hw_params(struct iwl_priv *priv)
+{
+ priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
+ BIT(IEEE80211_BAND_5GHZ);
+
+ priv->hw_params.tx_chains_num =
+ num_of_ant(priv->hw_params.valid_tx_ant);
+ priv->hw_params.rx_chains_num =
+ num_of_ant(priv->hw_params.valid_rx_ant);
+
+ iwl5000_set_ct_threshold(priv);
+
+ /* Set initial sensitivity parameters */
+ priv->hw_params.sens = &iwl5000_sensitivity;
+}
+
+static void iwl5150_hw_set_hw_params(struct iwl_priv *priv)
+{
+ priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
+ BIT(IEEE80211_BAND_5GHZ);
+
+ priv->hw_params.tx_chains_num =
+ num_of_ant(priv->hw_params.valid_tx_ant);
+ priv->hw_params.rx_chains_num =
+ num_of_ant(priv->hw_params.valid_rx_ant);
+
+ iwl5150_set_ct_threshold(priv);
+
+ /* Set initial sensitivity parameters */
+ priv->hw_params.sens = &iwl5150_sensitivity;
+}
+
+static void iwl5150_temperature(struct iwl_priv *priv)
+{
+ u32 vt = 0;
+ s32 offset = iwl_temp_calib_to_offset(priv);
+
+ vt = le32_to_cpu(priv->statistics.common.temperature);
+ vt = vt / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF + offset;
+ /* now vt hold the temperature in Kelvin */
+ priv->temperature = KELVIN_TO_CELSIUS(vt);
+ iwl_tt_handler(priv);
+}
+
+static int iwl5000_hw_channel_switch(struct iwl_priv *priv,
+ struct ieee80211_channel_switch *ch_switch)
+{
+ /*
+ * MULTI-FIXME
+ * See iwlagn_mac_channel_switch.
+ */
+ struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+ struct iwl5000_channel_switch_cmd cmd;
+ const struct iwl_channel_info *ch_info;
+ u32 switch_time_in_usec, ucode_switch_time;
+ u16 ch;
+ u32 tsf_low;
+ u8 switch_count;
+ u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
+ struct ieee80211_vif *vif = ctx->vif;
+ struct iwl_host_cmd hcmd = {
+ .id = REPLY_CHANNEL_SWITCH,
+ .len = { sizeof(cmd), },
+ .flags = CMD_SYNC,
+ .data = { &cmd, },
+ };
+
+ cmd.band = priv->band == IEEE80211_BAND_2GHZ;
+ ch = ch_switch->channel->hw_value;
+ IWL_DEBUG_11H(priv, "channel switch from %d to %d\n",
+ ctx->active.channel, ch);
+ cmd.channel = cpu_to_le16(ch);
+ cmd.rxon_flags = ctx->staging.flags;
+ cmd.rxon_filter_flags = ctx->staging.filter_flags;
+ switch_count = ch_switch->count;
+ tsf_low = ch_switch->timestamp & 0x0ffffffff;
+ /*
+ * calculate the ucode channel switch time
+ * adding TSF as one of the factor for when to switch
+ */
+ if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
+ if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
+ beacon_interval)) {
+ switch_count -= (priv->ucode_beacon_time -
+ tsf_low) / beacon_interval;
+ } else
+ switch_count = 0;
+ }
+ if (switch_count <= 1)
+ cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
+ else {
+ switch_time_in_usec =
+ vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
+ ucode_switch_time = iwl_usecs_to_beacons(priv,
+ switch_time_in_usec,
+ beacon_interval);
+ cmd.switch_time = iwl_add_beacon_time(priv,
+ priv->ucode_beacon_time,
+ ucode_switch_time,
+ beacon_interval);
+ }
+ IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
+ cmd.switch_time);
+ ch_info = iwl_get_channel_info(priv, priv->band, ch);
+ if (ch_info)
+ cmd.expect_beacon = is_channel_radar(ch_info);
+ else {
+ IWL_ERR(priv, "invalid channel switch from %u to %u\n",
+ ctx->active.channel, ch);
+ return -EFAULT;
+ }
+
+ return iwl_dvm_send_cmd(priv, &hcmd);
+}
+
+struct iwl_lib_ops iwl5000_lib = {
+ .set_hw_params = iwl5000_hw_set_hw_params,
+ .set_channel_switch = iwl5000_hw_channel_switch,
+ .nic_config = iwl5000_nic_config,
+ .eeprom_ops = {
+ .regulatory_bands = {
+ EEPROM_REG_BAND_1_CHANNELS,
+ EEPROM_REG_BAND_2_CHANNELS,
+ EEPROM_REG_BAND_3_CHANNELS,
+ EEPROM_REG_BAND_4_CHANNELS,
+ EEPROM_REG_BAND_5_CHANNELS,
+ EEPROM_REG_BAND_24_HT40_CHANNELS,
+ EEPROM_REG_BAND_52_HT40_CHANNELS
+ },
+ },
+ .temperature = iwlagn_temperature,
+};
+
+struct iwl_lib_ops iwl5150_lib = {
+ .set_hw_params = iwl5150_hw_set_hw_params,
+ .set_channel_switch = iwl5000_hw_channel_switch,
+ .nic_config = iwl5000_nic_config,
+ .eeprom_ops = {
+ .regulatory_bands = {
+ EEPROM_REG_BAND_1_CHANNELS,
+ EEPROM_REG_BAND_2_CHANNELS,
+ EEPROM_REG_BAND_3_CHANNELS,
+ EEPROM_REG_BAND_4_CHANNELS,
+ EEPROM_REG_BAND_5_CHANNELS,
+ EEPROM_REG_BAND_24_HT40_CHANNELS,
+ EEPROM_REG_BAND_52_HT40_CHANNELS
+ },
+ },
+ .temperature = iwl5150_temperature,
+};
+
+
+
+/*
+ * 6000 series
+ * ===========
+ */
+
+static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
+{
+ /* want Celsius */
+ priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
+ priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
+}
+
+/* NIC configuration for 6000 series */
+static void iwl6000_nic_config(struct iwl_priv *priv)
+{
+ iwl_rf_config(priv);
+
+ switch (cfg(priv)->device_family) {
+ case IWL_DEVICE_FAMILY_6005:
+ case IWL_DEVICE_FAMILY_6030:
+ case IWL_DEVICE_FAMILY_6000:
+ break;
+ case IWL_DEVICE_FAMILY_6000i:
+ /* 2x2 IPA phy type */
+ iwl_write32(trans(priv), CSR_GP_DRIVER_REG,
+ CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
+ break;
+ case IWL_DEVICE_FAMILY_6050:
+ /* Indicate calibration version to uCode. */
+ if (iwl_eeprom_calib_version(priv) >= 6)
+ iwl_set_bit(trans(priv), CSR_GP_DRIVER_REG,
+ CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
+ break;
+ case IWL_DEVICE_FAMILY_6150:
+ /* Indicate calibration version to uCode. */
+ if (iwl_eeprom_calib_version(priv) >= 6)
+ iwl_set_bit(trans(priv), CSR_GP_DRIVER_REG,
+ CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
+ iwl_set_bit(trans(priv), CSR_GP_DRIVER_REG,
+ CSR_GP_DRIVER_REG_BIT_6050_1x2);
+ break;
+ default:
+ WARN_ON(1);
+ }
+}
+
+static const struct iwl_sensitivity_ranges iwl6000_sensitivity = {
+ .min_nrg_cck = 110,
+ .auto_corr_min_ofdm = 80,
+ .auto_corr_min_ofdm_mrc = 128,
+ .auto_corr_min_ofdm_x1 = 105,
+ .auto_corr_min_ofdm_mrc_x1 = 192,
+
+ .auto_corr_max_ofdm = 145,
+ .auto_corr_max_ofdm_mrc = 232,
+ .auto_corr_max_ofdm_x1 = 110,
+ .auto_corr_max_ofdm_mrc_x1 = 232,
+
+ .auto_corr_min_cck = 125,
+ .auto_corr_max_cck = 175,
+ .auto_corr_min_cck_mrc = 160,
+ .auto_corr_max_cck_mrc = 310,
+ .nrg_th_cck = 110,
+ .nrg_th_ofdm = 110,
+
+ .barker_corr_th_min = 190,
+ .barker_corr_th_min_mrc = 336,
+ .nrg_th_cca = 62,
+};
+
+static void iwl6000_hw_set_hw_params(struct iwl_priv *priv)
+{
+ priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
+ BIT(IEEE80211_BAND_5GHZ);
+
+ priv->hw_params.tx_chains_num =
+ num_of_ant(priv->hw_params.valid_tx_ant);
+ if (cfg(priv)->rx_with_siso_diversity)
+ priv->hw_params.rx_chains_num = 1;
+ else
+ priv->hw_params.rx_chains_num =
+ num_of_ant(priv->hw_params.valid_rx_ant);
+
+ iwl6000_set_ct_threshold(priv);
+
+ /* Set initial sensitivity parameters */
+ priv->hw_params.sens = &iwl6000_sensitivity;
+
+}
+
+static int iwl6000_hw_channel_switch(struct iwl_priv *priv,
+ struct ieee80211_channel_switch *ch_switch)
+{
+ /*
+ * MULTI-FIXME
+ * See iwlagn_mac_channel_switch.
+ */
+ struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+ struct iwl6000_channel_switch_cmd cmd;
+ const struct iwl_channel_info *ch_info;
+ u32 switch_time_in_usec, ucode_switch_time;
+ u16 ch;
+ u32 tsf_low;
+ u8 switch_count;
+ u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
+ struct ieee80211_vif *vif = ctx->vif;
+ struct iwl_host_cmd hcmd = {
+ .id = REPLY_CHANNEL_SWITCH,
+ .len = { sizeof(cmd), },
+ .flags = CMD_SYNC,
+ .data = { &cmd, },
+ };
+
+ cmd.band = priv->band == IEEE80211_BAND_2GHZ;
+ ch = ch_switch->channel->hw_value;
+ IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
+ ctx->active.channel, ch);
+ cmd.channel = cpu_to_le16(ch);
+ cmd.rxon_flags = ctx->staging.flags;
+ cmd.rxon_filter_flags = ctx->staging.filter_flags;
+ switch_count = ch_switch->count;
+ tsf_low = ch_switch->timestamp & 0x0ffffffff;
+ /*
+ * calculate the ucode channel switch time
+ * adding TSF as one of the factor for when to switch
+ */
+ if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
+ if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
+ beacon_interval)) {
+ switch_count -= (priv->ucode_beacon_time -
+ tsf_low) / beacon_interval;
+ } else
+ switch_count = 0;
+ }
+ if (switch_count <= 1)
+ cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
+ else {
+ switch_time_in_usec =
+ vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
+ ucode_switch_time = iwl_usecs_to_beacons(priv,
+ switch_time_in_usec,
+ beacon_interval);
+ cmd.switch_time = iwl_add_beacon_time(priv,
+ priv->ucode_beacon_time,
+ ucode_switch_time,
+ beacon_interval);
+ }
+ IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
+ cmd.switch_time);
+ ch_info = iwl_get_channel_info(priv, priv->band, ch);
+ if (ch_info)
+ cmd.expect_beacon = is_channel_radar(ch_info);
+ else {
+ IWL_ERR(priv, "invalid channel switch from %u to %u\n",
+ ctx->active.channel, ch);
+ return -EFAULT;
+ }
+
+ return iwl_dvm_send_cmd(priv, &hcmd);
+}
+
+struct iwl_lib_ops iwl6000_lib = {
+ .set_hw_params = iwl6000_hw_set_hw_params,
+ .set_channel_switch = iwl6000_hw_channel_switch,
+ .nic_config = iwl6000_nic_config,
+ .eeprom_ops = {
+ .regulatory_bands = {
+ EEPROM_REG_BAND_1_CHANNELS,
+ EEPROM_REG_BAND_2_CHANNELS,
+ EEPROM_REG_BAND_3_CHANNELS,
+ EEPROM_REG_BAND_4_CHANNELS,
+ EEPROM_REG_BAND_5_CHANNELS,
+ EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
+ EEPROM_REG_BAND_52_HT40_CHANNELS
+ },
+ .enhanced_txpower = true,
+ },
+ .temperature = iwlagn_temperature,
+};
+
+struct iwl_lib_ops iwl6030_lib = {
+ .set_hw_params = iwl6000_hw_set_hw_params,
+ .set_channel_switch = iwl6000_hw_channel_switch,
+ .nic_config = iwl6000_nic_config,
+ .eeprom_ops = {
+ .regulatory_bands = {
+ EEPROM_REG_BAND_1_CHANNELS,
+ EEPROM_REG_BAND_2_CHANNELS,
+ EEPROM_REG_BAND_3_CHANNELS,
+ EEPROM_REG_BAND_4_CHANNELS,
+ EEPROM_REG_BAND_5_CHANNELS,
+ EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
+ EEPROM_REG_BAND_52_HT40_CHANNELS
+ },
+ .enhanced_txpower = true,
+ },
+ .temperature = iwlagn_temperature,
+};
iwlagn_rx_calc_noise(priv);
queue_work(priv->workqueue, &priv->run_time_calib_work);
}
- if (cfg(priv)->lib->temperature && change)
- cfg(priv)->lib->temperature(priv);
+ if (priv->lib->temperature && change)
+ priv->lib->temperature(priv);
spin_unlock(&priv->statistics.lock);
priv->hw_params.sku &= ~EEPROM_SKU_CAP_11N_ENABLE;
/* Device-specific setup */
- cfg(priv)->lib->set_hw_params(priv);
+ priv->lib->set_hw_params(priv);
}
priv->shrd = trans->shrd;
priv->fw = fw;
+ switch (cfg(priv)->device_family) {
+ case IWL_DEVICE_FAMILY_1000:
+ case IWL_DEVICE_FAMILY_100:
+ priv->lib = &iwl1000_lib;
+ break;
+ case IWL_DEVICE_FAMILY_2000:
+ case IWL_DEVICE_FAMILY_105:
+ priv->lib = &iwl2000_lib;
+ break;
+ case IWL_DEVICE_FAMILY_2030:
+ case IWL_DEVICE_FAMILY_135:
+ priv->lib = &iwl2030_lib;
+ break;
+ case IWL_DEVICE_FAMILY_5000:
+ priv->lib = &iwl5000_lib;
+ break;
+ case IWL_DEVICE_FAMILY_5150:
+ priv->lib = &iwl5150_lib;
+ break;
+ case IWL_DEVICE_FAMILY_6000:
+ case IWL_DEVICE_FAMILY_6005:
+ case IWL_DEVICE_FAMILY_6000i:
+ case IWL_DEVICE_FAMILY_6050:
+ case IWL_DEVICE_FAMILY_6150:
+ priv->lib = &iwl6000_lib;
+ break;
+ case IWL_DEVICE_FAMILY_6030:
+ priv->lib = &iwl6030_lib;
+ break;
+ default:
+ break;
+ }
+
+ if (WARN_ON(!priv->lib))
+ goto out_free_traffic_mem;
+
/*
* Populate the state variables that the transport layer needs
* to know about.
{
struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
- cfg(priv)->lib->nic_config(priv);
+ priv->lib->nic_config(priv);
}
static void iwl_stop_sw_queue(struct iwl_op_mode *op_mode, int queue)
/* AUX (TX during scan dwell) queue */
#define IWL_AUX_QUEUE 10
+/* device operations */
+extern struct iwl_lib_ops iwl1000_lib;
+extern struct iwl_lib_ops iwl2000_lib;
+extern struct iwl_lib_ops iwl2030_lib;
+extern struct iwl_lib_ops iwl5000_lib;
+extern struct iwl_lib_ops iwl5150_lib;
+extern struct iwl_lib_ops iwl6000_lib;
+extern struct iwl_lib_ops iwl6030_lib;
+
+
struct iwl_ucode_capabilities;
#include <linux/types.h>
#include <net/mac80211.h>
-struct iwl_lib_ops;
-
enum iwl_device_family {
IWL_DEVICE_FAMILY_UNDEFINED,
u8 valid_rx_ant;
u16 eeprom_ver;
u16 eeprom_calib_ver;
- const struct iwl_lib_ops *lib;
/* params not likely to change within a device family */
const struct iwl_base_params *base_params;
/* params likely to change within a device family */
#define TIME_UNIT 1024
-struct iwl_lib_ops {
- /* set hw dependent parameters */
- void (*set_hw_params)(struct iwl_priv *priv);
- int (*set_channel_switch)(struct iwl_priv *priv,
- struct ieee80211_channel_switch *ch_switch);
- /* device specific configuration */
- void (*nic_config)(struct iwl_priv *priv);
-
- /* eeprom operations (as defined in iwl-eeprom.h) */
- struct iwl_eeprom_ops eeprom_ops;
-
- /* temperature */
- void (*temperature)(struct iwl_priv *priv);
-};
-
/***************************
* L i b *
***************************/
const struct iwl_sensitivity_ranges *sens;
};
+struct iwl_lib_ops {
+ /* set hw dependent parameters */
+ void (*set_hw_params)(struct iwl_priv *priv);
+ int (*set_channel_switch)(struct iwl_priv *priv,
+ struct ieee80211_channel_switch *ch_switch);
+ /* device specific configuration */
+ void (*nic_config)(struct iwl_priv *priv);
+
+ /* eeprom operations (as defined in iwl-eeprom.h) */
+ struct iwl_eeprom_ops eeprom_ops;
+
+ /* temperature */
+ void (*temperature)(struct iwl_priv *priv);
+};
+
#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
struct iwl_testmode_trace {
u32 buff_size;
/*data shared among all the driver's layers */
struct iwl_shared *shrd;
const struct iwl_fw *fw;
+ const struct iwl_lib_ops *lib;
unsigned long status;
spinlock_t sta_lock;
const struct iwl_eeprom_channel **eeprom_ch_info,
const u8 **eeprom_ch_index)
{
- u32 offset = cfg(priv)->lib->
+ u32 offset = priv->lib->
eeprom_ops.regulatory_bands[eep_band - 1];
switch (eep_band) {
case 1: /* 2.4GHz band */
}
/* Check if we do have HT40 channels */
- if (cfg(priv)->lib->eeprom_ops.regulatory_bands[5] ==
+ if (priv->lib->eeprom_ops.regulatory_bands[5] ==
EEPROM_REGULATORY_BAND_NO_HT40 &&
- cfg(priv)->lib->eeprom_ops.regulatory_bands[6] ==
+ priv->lib->eeprom_ops.regulatory_bands[6] ==
EEPROM_REGULATORY_BAND_NO_HT40)
return 0;
* driver need to process addition information
* to determine the max channel tx power limits
*/
- if (cfg(priv)->lib->eeprom_ops.enhanced_txpower)
+ if (priv->lib->eeprom_ops.enhanced_txpower)
iwl_eeprom_enhanced_txpower(priv);
return 0;
if (!iwl_is_associated_ctx(ctx))
goto out;
- if (!cfg(priv)->lib->set_channel_switch)
+ if (!priv->lib->set_channel_switch)
goto out;
ch = channel->hw_value;
*/
set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status);
priv->switch_channel = cpu_to_le16(ch);
- if (cfg(priv)->lib->set_channel_switch(priv, ch_switch)) {
+ if (priv->lib->set_channel_switch(priv, ch_switch)) {
clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status);
priv->switch_channel = 0;
ieee80211_chswitch_done(ctx->vif, false);
projects / openwrt / staging / blogic.git / commitdiff