Refresh the kernel patches on top of 5.10 so they apply.
Manually fixup the 705-net-add-qualcomm-ar40xx-phy.patch
to apply.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
--- a/arch/arm/boot/compressed/vmlinux.lds.S
+++ b/arch/arm/boot/compressed/vmlinux.lds.S
-@@ -93,6 +93,13 @@ SECTIONS
+@@ -101,6 +101,13 @@ SECTIONS
_edata = .;
/*
* The image_end section appears after any additional loadable sections
* that the linker may decide to insert in the binary image. Having
-@@ -132,4 +139,4 @@ SECTIONS
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
+@@ -138,4 +145,4 @@ SECTIONS
+
+ ARM_ASSERTS
}
-ASSERT(_edata_real == _edata, "error: zImage file size is incorrect");
+ASSERT(_edata_real == _edata_dtb, "error: zImage file size is incorrect");
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
-@@ -599,6 +599,41 @@ not_relocated: mov r0, #0
+@@ -601,6 +601,41 @@ not_relocated: mov r0, #0
bic r4, r4, #1
blne cache_on
-From 0e28623a11f3916c1fe5b7e789c7ab8ca932a929 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Wed, 22 Jan 2020 13:02:13 +0100
-Subject: [PATCH] mmc: sdhci: sdhci-msm: use sdhci_set_clock instead of
- sdhci_msm_set_clock
+From f63ea127643a605da97090ce585fdd7c2d17fa42 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Mon, 14 Dec 2020 13:35:35 +0100
+Subject: [PATCH] mmc: sdhci-msm: use sdhci_set_clock
When using sdhci_msm_set_clock clock setting will fail, so lets
use the generic sdhci_set_clock.
-Signed-off-by: Robert Marko <robimarko@gmail.com>
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
---
drivers/mmc/host/sdhci-msm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
-@@ -1746,7 +1746,7 @@ MODULE_DEVICE_TABLE(of, sdhci_msm_dt_mat
+@@ -2191,7 +2191,7 @@ MODULE_DEVICE_TABLE(of, sdhci_msm_dt_mat
static const struct sdhci_ops sdhci_msm_ops = {
- .reset = sdhci_reset,
+ .reset = sdhci_msm_reset,
- .set_clock = sdhci_msm_set_clock,
+ .set_clock = sdhci_set_clock,
.get_min_clock = sdhci_msm_get_min_clock,
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
-@@ -776,6 +776,16 @@ struct xps_map {
+@@ -765,6 +765,16 @@ struct xps_map {
#define XPS_MIN_MAP_ALLOC ((L1_CACHE_ALIGN(offsetof(struct xps_map, queues[1])) \
- sizeof(struct xps_map)) / sizeof(u16))
/*
* This structure holds all XPS maps for device. Maps are indexed by CPU.
*/
-@@ -1379,6 +1389,9 @@ struct net_device_ops {
+@@ -1445,6 +1455,9 @@ struct net_device_ops {
const struct sk_buff *skb,
u16 rxq_index,
u32 flow_id);
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
-@@ -584,6 +584,13 @@ config XILINX_GMII2RGMII
+@@ -388,6 +388,13 @@ config XILINX_GMII2RGMII
the Reduced Gigabit Media Independent Interface(RGMII) between
Ethernet physical media devices and the Gigabit Ethernet controller.
config MICREL_KS8995MA
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
-@@ -69,6 +69,7 @@ ifdef CONFIG_HWMON
+@@ -50,6 +50,7 @@ ifdef CONFIG_HWMON
aquantia-objs += aquantia_hwmon.o
endif
obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o
+obj-$(CONFIG_AR40XX_PHY) += ar40xx.o
- obj-$(CONFIG_AX88796B_PHY) += ax88796b.o
obj-$(CONFIG_AT803X_PHY) += at803x.o
- obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
+ obj-$(CONFIG_AX88796B_PHY) += ax88796b.o
+ obj-$(CONFIG_BCM54140_PHY) += bcm54140.o
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
-@@ -537,6 +537,12 @@ config NXP_TJA11XX_PHY
- ---help---
- Currently supports the NXP TJA1100 and TJA1101 PHY.
+@@ -314,6 +314,12 @@ config AT803X_PHY
+ help
+ Currently supports the AR8030, AR8031, AR8033 and AR8035 model
+config QCA807X_PHY
+ tristate "Qualcomm QCA807X PHYs"
+
config QSEMI_PHY
tristate "Quality Semiconductor PHYs"
- ---help---
+ help
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
-@@ -103,6 +103,7 @@ obj-$(CONFIG_MICROSEMI_PHY) += mscc.o
+@@ -86,6 +86,7 @@ obj-$(CONFIG_MICROSEMI_PHY) += mscc/
obj-$(CONFIG_NATIONAL_PHY) += national.o
obj-$(CONFIG_NXP_TJA11XX_PHY) += nxp-tja11xx.o
obj-$(CONFIG_QSEMI_PHY) += qsemi.o
Subject: SoC: add qualcomm syscon
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
-@@ -20,6 +20,7 @@ obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
+@@ -21,6 +21,7 @@ obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
obj-$(CONFIG_QCOM_SMSM) += smsm.o
obj-$(CONFIG_QCOM_SOCINFO) += socinfo.o
obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
+obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o
obj-$(CONFIG_QCOM_APR) += apr.o
- obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o
- obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o
+ obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o
+ obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
-@@ -183,6 +183,13 @@ config QCOM_SOCINFO
+@@ -189,6 +189,13 @@ config QCOM_SOCINFO
Say yes here to support the Qualcomm socinfo driver, providing
information about the SoC to user space.
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -837,11 +837,61 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+@@ -902,11 +902,61 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
+ qcom-ipq4029-gl-s1300.dtb \
+ qcom-ipq4029-mr33.dtb \
qcom-ipq8064-ap148.dtb \
+ qcom-ipq8064-rb3011.dtb \
qcom-msm8660-surf.dtb \
- qcom-msm8960-cdp.dtb \
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
-@@ -1059,6 +1059,9 @@ int __init early_init_dt_scan_chosen(uns
+@@ -1055,6 +1055,9 @@ int __init early_init_dt_scan_chosen(uns
p = of_get_flat_dt_prop(node, "bootargs", &l);
if (p != NULL && l > 0)
strlcpy(data, p, min(l, COMMAND_LINE_SIZE));
projects / openwrt / staging / xback.git / commitdiff