--- /dev/null
+From a651d10fbd880098d7b98dee27dfd1eb15146fb2 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Sun, 12 Nov 2023 18:40:22 +0100
+Subject: [PATCH] malibu-phy: add support for manual define of first phy addr
+
+The usage of first_phy_addr is EXTREMELY FRAGILE and results
+in dangerous results if the OEM (or anyone that by chance try to
+implement things in a logical manner) deviates from the default values
+from the "magical template".
+
+To be in more details. With QSDK 12.4, some tweaks were done to improve
+autoneg and now on every call of port status, the phydev is tried to
+add. This resulted in the call and log spam of an error with ports that
+are actually not present on the system with qsdk reporting phydev is
+NULL. This itself is not an error and printing the error is correct.
+
+What is actually an error from ages is setting generic bitmap reporting
+presence of port that are actually not present. This is very common on
+OEM where the switch_lan_bmp is always a variant of 0x1e (that on bitmap
+results in PORT1 PORT2 PORT3 PORT4 present) or 0x3e (PORT1 PORT2 PORT3
+PORT4 PORT5). Reality is that many device are used as AP with one LAN
+port or one WAN port. (or even exotic configuration with PORT1 not
+present and PORT2 PORT3 PORT4 present (Xiaomi 3600)
+
+With this finding one can say... ok nice, then lets update the DT and
+set the correct bitmap...
+
+Again world is a bad place and reality is that this cause wonderful
+regression in some case of by extreme luck the first ever connected
+port working and the rest of the switch dead.
+
+The problem has been bisected to all the device that doesn't have the
+PORT1 declared in any of the bitmap.
+
+With this prefaction in mind, on to the REAL problem.
+
+malibu_phy_hw_init FOR SOME REASON, set a global variable first_phy_addr
+to the first detected PHY addr that coincidentally is always PORT1.
+PORT1 addr is 0x0. The entire code in malibu_phy use this variable to
+derive the phy addrs in some function.
+
+Declaring a bitmap where the PORT1 is missing (or worse PORT4 the only
+one connected) result in first_phy_addr set to 1 or whatever phy addr is
+detected first setting wrong value all over the init stage.
+
+To fix this, introduce a new binding malibu_first_phy_addr to manually
+declare the first phy that the malibu PHY driver should use and permit
+to detach it from port bmp detection. The legacy detection is kept for
+compatibility reason.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+---
+ include/init/ssdk_dts.h | 1 +
+ include/init/ssdk_init.h | 2 ++
+ src/hsl/phy/malibu_phy.c | 5 +++++
+ src/init/ssdk_dts.c | 15 +++++++++++++++
+ 4 files changed, 23 insertions(+)
+
+--- a/include/init/ssdk_dts.h
++++ b/include/init/ssdk_dts.h
+@@ -146,6 +146,7 @@ a_uint32_t ssdk_wan_bmp_get(a_uint32_t d
+ sw_error_t ssdk_lan_bmp_set(a_uint32_t dev_id, a_uint32_t lan_bmp);
+ sw_error_t ssdk_wan_bmp_set(a_uint32_t dev_id, a_uint32_t wan_bmp);
+ a_uint32_t ssdk_inner_bmp_get(a_uint32_t dev_id);
++a_uint32_t ssdk_malibu_first_phy_addr_get(a_uint32_t dev_id);
+ hsl_reg_mode ssdk_switch_reg_access_mode_get(a_uint32_t dev_id);
+ void ssdk_switch_reg_map_info_get(a_uint32_t dev_id, ssdk_reg_map_info *info);
+ a_uint32_t ssdk_switch_pcie_base_get(a_uint32_t dev_id);
+--- a/include/init/ssdk_init.h
++++ b/include/init/ssdk_init.h
+@@ -194,6 +194,7 @@ enum ssdk_port_wrapper_cfg {
+ a_uint32_t lan_bmp;
+ a_uint32_t wan_bmp;
+ a_uint32_t inner_bmp;
++ a_uint32_t malibu_first_phy_addr;
+ } ssdk_port_cfg;
+
+ typedef struct
+@@ -384,6 +385,7 @@ ssdk_hsl_access_mode_set(a_uint32_t dev_
+
+ a_uint32_t ssdk_dt_global_get_mac_mode(a_uint32_t dev_id, a_uint32_t index);
+ a_uint32_t ssdk_dt_global_set_mac_mode(a_uint32_t dev_id, a_uint32_t index, a_uint32_t mode);
++a_uint32_t ssdk_malibu_first_phy_addr_get(a_uint32_t dev_id);
+
+ a_uint32_t
+ qca_hppe_port_mac_type_get(a_uint32_t dev_id, a_uint32_t port_id);
+--- a/src/hsl/phy/malibu_phy.c
++++ b/src/hsl/phy/malibu_phy.c
+@@ -1945,6 +1945,11 @@ static int malibu_phy_api_ops_init(void)
+ int malibu_phy_init(a_uint32_t dev_id, a_uint32_t port_bmp)
+ {
+ static a_uint32_t phy_ops_flag = 0;
++ a_uint32_t malibu_first_phy_addr;
++
++ malibu_first_phy_addr = ssdk_malibu_first_phy_addr_get(dev_id);
++ if (malibu_first_phy_addr != MAX_PHY_ADDR)
++ first_phy_addr = malibu_first_phy_addr;
+
+ if(phy_ops_flag == 0) {
+ malibu_phy_api_ops_init();
+--- a/src/init/ssdk_dts.c
++++ b/src/init/ssdk_dts.c
+@@ -186,6 +186,13 @@ a_uint32_t ssdk_inner_bmp_get(a_uint32_t
+ return cfg->port_cfg.inner_bmp;
+ }
+
++a_uint32_t ssdk_malibu_first_phy_addr_get(a_uint32_t dev_id)
++{
++ ssdk_dt_cfg* cfg = ssdk_dt_global.ssdk_dt_switch_nodes[dev_id];
++
++ return cfg->port_cfg.malibu_first_phy_addr;
++}
++
+ hsl_reg_mode ssdk_switch_reg_access_mode_get(a_uint32_t dev_id)
+ {
+ ssdk_dt_cfg* cfg = ssdk_dt_global.ssdk_dt_switch_nodes[dev_id];
+@@ -1039,6 +1046,14 @@ static void ssdk_dt_parse_port_bmp(a_uin
+ cfg->port_cfg.inner_bmp;
+ }
+
++ /* Permit to manually declare start phy addr for malibu PHY. If not found set to legacy detection. */
++ if (!of_property_read_u32(switch_node, "malibu_first_phy_addr", &cfg->port_cfg.malibu_first_phy_addr)) {
++ ssdk_dt_global.ssdk_dt_switch_nodes[dev_id]->port_cfg.malibu_first_phy_addr =
++ cfg->port_cfg.malibu_first_phy_addr;
++ } else {
++ ssdk_dt_global.ssdk_dt_switch_nodes[dev_id]->port_cfg.malibu_first_phy_addr = MAX_PHY_ADDR;
++ }
++
+ ssdk_dt_global.ssdk_dt_switch_nodes[dev_id]->port_cfg.cpu_bmp = cfg->port_cfg.cpu_bmp;
+ ssdk_dt_global.ssdk_dt_switch_nodes[dev_id]->port_cfg.lan_bmp = cfg->port_cfg.lan_bmp;
+ ssdk_dt_global.ssdk_dt_switch_nodes[dev_id]->port_cfg.wan_bmp = cfg->port_cfg.wan_bmp;
switch_access_mode = "local bus";
switch_cpu_bmp = <ESS_PORT0>; /* cpu port bitmap */
switch_inner_bmp = <ESS_PORT7>; /*inner port bitmap*/
+ /* This is a special binding that controls how the malibu PHY are
+ * init. This value reflect the PHY addr of the first malibu PHY.
+ * Malibu PHY are in a bundle of 5 PHY.
+ * Some device might have some port not connected.
+ * SSDK still needs the addrs of the first PHY (even if not connected)
+ * to correctly setup the malibu PHY.
+ *
+ * This is needed as previously SSDK based this on the port bmp, but
+ * this can be problematic now that we specify correct bmp.
+ *
+ * Most common configuration have the malibu PHY placed at 0.
+ * But some device might have it placed at address 16.
+ * To drive the correct value, check the port id of the malibu PHY
+ * and try to understand what is the first one in devices where some
+ * port are missing. port_phyinfo is normally the way to go to derive
+ * this value in the few special cases.
+ */
+ malibu_first_phy_addr = <0>;
clocks = <&gcc GCC_CMN_12GPLL_AHB_CLK>,
<&gcc GCC_CMN_12GPLL_SYS_CLK>,
<&gcc GCC_UNIPHY0_AHB_CLK>,
projects / openwrt / staging / xback.git / commitdiff