drm/dp: Update DPCD defines

Sources: DP, eDP, and DP interop specs, and a VESA slideshow about DP
1.2 for the MST bits.

Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 1744b18c06b380f97ebb85ab684d1a41c63e6ebe..f9888c3cb9559ecc34ff96126b5fa43cf18b02c7 100644 (file)
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -69,16 +69,30 @@
 /* 10b = TMDS or HDMI */
 /* 11b = Other */
 # define DP_FORMAT_CONVERSION               (1 << 3)
+# define DP_DETAILED_CAP_INFO_AVAILABLE            (1 << 4)
 
 #define DP_MAIN_LINK_CHANNEL_CODING         0x006
 
 #define DP_DOWN_STREAM_PORT_COUNT          0x007
-#define  DP_PORT_COUNT_MASK                0x0f
-#define  DP_OUI_SUPPORT                            (1 << 7)
+# define DP_PORT_COUNT_MASK                0x0f
+# define DP_MSA_TIMING_PAR_IGNORED         (1 << 6)
+# define DP_OUI_SUPPORT                            (1 << 7)
+
+#define DP_I2C_SPEED_CAP                   0x00c
+# define DP_I2C_SPEED_1K                   0x01
+# define DP_I2C_SPEED_5K                   0x02
+# define DP_I2C_SPEED_10K                  0x04
+# define DP_I2C_SPEED_100K                 0x08
+# define DP_I2C_SPEED_400K                 0x10
+# define DP_I2C_SPEED_1M                   0x20
 
 #define DP_EDP_CONFIGURATION_CAP            0x00d
 #define DP_TRAINING_AUX_RD_INTERVAL         0x00e
 
+/* Multiple stream transport */
+#define DP_MSTM_CAP                        0x021
+# define DP_MST_CAP                        (1 << 0)
+
 #define DP_PSR_SUPPORT                      0x070
 # define DP_PSR_IS_SUPPORTED                1
 #define DP_PSR_CAPS                         0x071
@@ -93,6 +107,31 @@
 # define DP_PSR_SETUP_TIME_MASK             (7 << 1)
 # define DP_PSR_SETUP_TIME_SHIFT            1
 
+/*
+ * 0x80-0x8f describe downstream port capabilities, but there are two layouts
+ * based on whether DP_DETAILED_CAP_INFO_AVAILABLE was set.  If it was not,
+ * each port's descriptor is one byte wide.  If it was set, each port's is
+ * four bytes wide, starting with the one byte from the base info.  As of
+ * DP interop v1.1a only VGA defines additional detail.
+ */
+
+/* offset 0 */
+#define DP_DOWNSTREAM_PORT_0               0x80
+# define DP_DS_PORT_TYPE_MASK              (7 << 0)
+# define DP_DS_PORT_TYPE_DP                0
+# define DP_DS_PORT_TYPE_VGA               1
+# define DP_DS_PORT_TYPE_DVI               2
+# define DP_DS_PORT_TYPE_HDMI              3
+# define DP_DS_PORT_TYPE_NON_EDID          4
+# define DP_DS_PORT_HPD                            (1 << 3)
+/* offset 1 for VGA is maximum megapixels per second / 8 */
+/* offset 2 */
+# define DP_DS_VGA_MAX_BPC_MASK                    (3 << 0)
+# define DP_DS_VGA_8BPC                            0
+# define DP_DS_VGA_10BPC                   1
+# define DP_DS_VGA_12BPC                   2
+# define DP_DS_VGA_16BPC                   3
+
 /* link configuration */
 #define        DP_LINK_BW_SET                      0x100
 # define DP_LINK_BW_1_62                   0x06
@@ -148,24 +187,37 @@
 
 #define DP_DOWNSPREAD_CTRL                 0x107
 # define DP_SPREAD_AMP_0_5                 (1 << 4)
+# define DP_MSA_TIMING_PAR_IGNORE_EN       (1 << 7)
 
 #define DP_MAIN_LINK_CHANNEL_CODING_SET            0x108
 # define DP_SET_ANSI_8B10B                 (1 << 0)
 
+#define DP_I2C_SPEED_CONTROL_STATUS        0x109
+/* bitmask as for DP_I2C_SPEED_CAP */
+
+#define DP_EDP_CONFIGURATION_SET            0x10a
+
+#define DP_MSTM_CTRL                       0x111
+# define DP_MST_EN                         (1 << 0)
+# define DP_UP_REQ_EN                      (1 << 1)
+# define DP_UPSTREAM_IS_SRC                (1 << 2)
+
 #define DP_PSR_EN_CFG                      0x170
 # define DP_PSR_ENABLE                     (1 << 0)
 # define DP_PSR_MAIN_LINK_ACTIVE           (1 << 1)
 # define DP_PSR_CRC_VERIFICATION           (1 << 2)
 # define DP_PSR_FRAME_CAPTURE              (1 << 3)
 
+#define DP_SINK_COUNT                      0x200
+# define DP_SINK_COUNT_MASK                (31 << 0)
+# define DP_SINK_CP_READY                  (1 << 6)
+
 #define DP_DEVICE_SERVICE_IRQ_VECTOR       0x201
 # define DP_REMOTE_CONTROL_COMMAND_PENDING  (1 << 0)
 # define DP_AUTOMATED_TEST_REQUEST         (1 << 1)
 # define DP_CP_IRQ                         (1 << 2)
 # define DP_SINK_SPECIFIC_IRQ              (1 << 6)
 
-#define DP_EDP_CONFIGURATION_SET            0x10a
-
 #define DP_LANE0_1_STATUS                  0x202
 #define DP_LANE2_3_STATUS                  0x203
 # define DP_LANE_CR_DONE                   (1 << 0)