Replacing mistyped "buad" with "baud" where applicable.
Signed-off-by: Horst Schirmeier <horst@schirmeier.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
- /* set up buad rate */
+ /* set up baud rate */
{
uint32 divisor;
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
- /* set up buad rate */
+ /* set up baud rate */
{
uint32 divisor;
#else
/*
* Note: Set baud rate, hardcoded here for rate of 115200
- * since became unsure of above "buad rate" algorithm (??).
+ * since became unsure of above "baud rate" algorithm (??).
*/
outreg(channel, LCR, 0x83);
outreg(channel, DLM, 0x00); // See note above
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
- /* set up buad rate */
+ /* set up baud rate */
{
uint32 divisor;
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
- /* set up buad rate */
+ /* set up baud rate */
{
uint32 divisor;
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
- /* set up buad rate */
+ /* set up baud rate */
{
uint32 divisor;
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
- /* set up buad rate */
+ /* set up baud rate */
{
uint32 divisor;
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
- /* set up buad rate */
+ /* set up baud rate */
{
uint32 divisor;
#define UARTDR 0x00 /* Tx/Rx data */
#define RXSTAT 0x04 /* Rx status */
#define H_UBRLCR 0x08 /* mode register high */
-#define M_UBRLCR 0x0C /* mode reg mid (MSB of buad)*/
+#define M_UBRLCR 0x0C /* mode reg mid (MSB of baud)*/
#define L_UBRLCR 0x10 /* mode reg low (LSB of baud)*/
#define UARTCON 0x14 /* control register */
#define UARTFLG 0x18 /* flag register */
* Changelog:
* 05-01-2000 SJH Created
* 05-13-2000 SJH Filled in function bodies
- * 07-26-2000 SJH Removed hard coded buad rate
+ * 07-26-2000 SJH Removed hard coded baud rate
*/
#include <asm/hardware.h>