CC: ramips: Backport support for ZBT WG2626

Backport of r47351

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 47605

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 545bd7090a4c3a2da86e259c984162535d12f396..5946f98bdb1251b5b25cfbc64a4ed97880615bb8 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -258,6 +258,11 @@ case $board in
                set_usb_led "lenovo:blue:usb"
                set_wifi_led "lenovo:blue:wifi"
                ;;
+       zbt-wg2626)
+               ucidef_set_led_default "power" "power" "zbt-wg2626:green:power" "1"
+               set_wifi_led "zbt-wg2626:green:air"
+               set_usb_led "zbt-wg2626:green:usb"
+               ;;
        zte-q7)
                set_wifi_led "zte:blue:status"
                ;;

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 19ef3f739c69a4e07ac002da21de6cd66baa730c..d7d016befe19e95095d753218989a4e29b8fdad0 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -145,7 +145,8 @@ ramips_setup_interfaces()
        wsr-1166 | \
        wt1520 | \
        xiaomi-miwifi-mini |\
-       y1)
+       y1|\
+       zbt-wg2626)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" "1" "1"
                ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t"

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index d32d69288bb1a422c2402160ef6f041e7ca8b656..0747d703f10712619c49c19c7b97fe7ebd5903b8 100644 (file)
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -247,6 +247,9 @@ get_status_led() {
        y1s)
                status_led="lenovo:blue:power"
                ;;
+       zbt-wg2626)
+               status_led="zbt-wg2626:green:power"
+               ;;
        zte-q7)
                status_led="zte:red:status"
                ;;

diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index a9a6664056388186c82106ce175eb1875aa92c67..4141ddd68b034211188a7d0deac02116107c991f 100755 (executable)
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -403,6 +403,9 @@ ramips_board_detect() {
        *"Zbtlink ZBT-WA05")
                name="zbt-wa05"
                ;;
+       *"ZBT-WG2626")
+               name="zbt-wg2626"
+               ;;
        *"ZBT WR8305RT")
                name="wr8305rt"
                ;;

diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 11fee85ea12fbfc19b236e7820917cb40238dad0..2f64d8c0c4863b03d15493f52777239f6972977c 100755 (executable)
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -126,8 +126,9 @@ platform_check_image() {
        xiaomi-miwifi-mini |\
        y1 |\
        y1s |\
-       zte-q7 |\
-       zbt-wa05)
+       zbt-wa05 |\
+       zbt-wg2626 |\
+       zte-q7)
                [ "$magic" != "27051956" ] && {
                        echo "Invalid image type."
                        return 1

diff --git a/target/linux/ramips/dts/ZBT-WG2626.dts b/target/linux/ramips/dts/ZBT-WG2626.dts
new file mode 100644 (file)
index 0000000..6170454
--- /dev/null
+++ b/target/linux/ramips/dts/ZBT-WG2626.dts
@@ -0,0 +1,127 @@
+/dts-v1/;
+
+/include/ "mt7621.dtsi"
+
+/ {
+       compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+       model = "ZBT-WG2626";
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600";
+       };
+
+       sdhci@10130000 {
+               status = "okay";
+       };
+
+       palmbus@1E000000 {
+               spi@b00 {
+                       status = "okay";
+
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "w25q128";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80";
+                               spi-max-frequency = <10000000>;
+
+                               partition@0 {
+                                       label = "u-boot";
+                                       reg = <0x0 0x30000>;
+                                       read-only;
+                               };
+
+                               partition@30000 {
+                                       label = "u-boot-env";
+                                       reg = <0x30000 0x10000>;
+                                       read-only;
+                               };
+
+                               factory: partition@40000 {
+                                       label = "factory";
+                                       reg = <0x40000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@50000 {
+                                       label = "firmware";
+                                       reg = <0x50000 0xfb0000>;
+                               };
+
+                       };
+               };
+
+               i2c@900 {
+                       compatible = "ralink,i2c-mt7621";
+                       reg = <0x900 0x100>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&i2c_pins>;
+                       status = "okay";
+               };
+       };
+
+       pcie@1e140000 {
+               status = "okay";
+
+               pcie0 {
+                       mt76@0,0 {
+                               reg = <0x0000 0 0 0 0>;
+                               device_type = "pci";
+                               mediatek,mtd-eeprom = <&factory 0x8000>;
+                               mediatek,2ghz = <0>;
+                       };
+               };
+
+               pcie1 {
+                       mt76@1,0 {
+                               reg = <0x0000 0 0 0 0>;
+                               device_type = "pci";
+                               mediatek,mtd-eeprom = <&factory 0x0000>;
+                               mediatek,5ghz = <0>;
+                       };
+               };
+       };
+
+       ethernet@1e100000 {
+               mtd-mac-address = <&factory 0xe000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 18 1>;
+                       linux,code = <0x198>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               status {
+                       label = "zbt-wg2626:green:status";
+                       gpios = <&gpio0 24 1>;
+               };
+       };
+
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
+                               ralink,function = "gpio";
+                       };
+               };
+       };
+};

diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index b4d0897780eb4d1f41f2d780b23ea7439008fd64..0dd46ca19c692c50d53951efce73b8306218daa4 100644 (file)
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -928,7 +928,7 @@ endif
 #
 
 ifeq ($(SUBTARGET),mt7621)
-  TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500
+  TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 zbt-wg2626
 endif
 
 define Device/mt7621
@@ -974,6 +974,11 @@ define Device/pbr-m1
   IMAGE_SIZE := $(ralink_default_fw_size_16M)
 endef
 
+define Device/zbt-wg2626
+  DTS := ZBT-WG2626
+  IMAGE_SIZE := $(ralink_default_fw_size_16M)
+endef
+
 #
 # MT7628 Profiles
 #

diff --git a/target/linux/ramips/mt7621/profiles/zbt.mk b/target/linux/ramips/mt7621/profiles/zbt.mk
new file mode 100644 (file)
index 0000000..cf9beff
--- /dev/null
+++ b/target/linux/ramips/mt7621/profiles/zbt.mk
@@ -0,0 +1,19 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/ZBT-WG2626
+       NAME:=ZBT-WG2626 Device
+       PACKAGES:=\
+               kmod-usb-core kmod-usb3 kmod-sdhci-mt7620 \
+               kmod-ledtrig-usbdev kmod-ata-core kmod-ata-ahci \
+               kmod-usb3-mt7621
+endef
+
+define Profile/ZBT-WG2626/Description
+       Package set for ZBT-WG2626 device
+endef
+$(eval $(call Profile,ZBT-WG2626))