#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
+#include <linux/irq.h>
#include <linux/etherdevice.h>
#include <asm/bootinfo.h>
#include <asm/mach-adm5120/adm5120_info.h>
#include <asm/mach-adm5120/adm5120_board.h>
#include <asm/mach-adm5120/adm5120_platform.h>
-#include <asm/mach-adm5120/adm5120_irq.h>
extern void cellvision_mac_setup(void) __init;
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/list.h>
+#include <linux/string.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <asm/mach-adm5120/adm5120_info.h>
#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_irq.h>
#include <asm/mach-adm5120/adm5120_board.h>
#include <asm/mach-adm5120/adm5120_platform.h>
mips_machtype);
if (board->name[0])
- memcpy(adm5120_board_name, board->name, ADM5120_BOARD_NAMELEN);
+ strlcpy(adm5120_board_name, board->name, ADM5120_BOARD_NAMELEN);
- printk(KERN_INFO PFX "board is '%s'\n", board->name);
+ printk(KERN_INFO PFX "board is '%s'\n", adm5120_board_name);
adm5120_gpio_init();
#include <linux/init.h>
#include <linux/types.h>
#include <linux/module.h>
+#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/gpio.h>
#include <asm/addrspace.h>
-#include <linux/gpio.h>
#include <asm/mach-adm5120/adm5120_defs.h>
#include <asm/mach-adm5120/adm5120_info.h>
#include <asm/mach-adm5120/adm5120_switch.h>
-#include <asm/mach-adm5120/adm5120_irq.h>
#define GPIO_READ(r) __raw_readl((r))
#define GPIO_WRITE(v, r) __raw_writel((v), (r))
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/version.h>
+#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/io.h>
-#include <asm/irq.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
#include <asm/bitops.h>
#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_irq.h>
static void adm5120_intc_irq_unmask(unsigned int irq);
static void adm5120_intc_irq_mask(unsigned int irq);
unsigned long status;
int irq;
- /* dispatch only one IRQ at a time */
status = intc_read_reg(INTC_REG_IRQ_STATUS) & INTC_INT_ALL;
-
if (status) {
irq = ADM5120_INTC_IRQ_BASE + fls(status) - 1;
do_IRQ(irq);
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/irq.h>
#include <asm/bootinfo.h>
#include <asm/mach-adm5120/adm5120_defs.h>
#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_irq.h>
#include <asm/mach-adm5120/adm5120_switch.h>
#include <asm/mach-adm5120/adm5120_nand.h>
#include <asm/mach-adm5120/adm5120_platform.h>
/* init command line, register a default kernel command line */
cmd = &_image_cmdline + 8;
if (strlen(cmd) > 0)
- strcpy(arcs_cmdline, cmd);
- else
- strcpy(arcs_cmdline, CONFIG_CMDLINE);
+ strlcpy(arcs_cmdline, cmd, sizeof(arcs_cmdline));
}
void __init prom_init(void)
{
prom_detect_machtype();
-
prom_init_cmdline();
}
while (1) {
if (cpu_wait)
cpu_wait();
- };
+ }
}
void __init plat_time_init(void)
for (i = 0; i < 6; i++) {
if (is_valid_ether_addr(myloader_info.macs[i]))
- memcpy(myloader_info.macs[i],
- adm5120_eth_macs[i], ETH_ALEN);
+ memcpy(adm5120_eth_macs[i],
+ myloader_info.macs[i], ETH_ALEN);
else
random_ether_addr(adm5120_eth_macs[i]);
}
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
+#include <linux/irq.h>
#include <linux/etherdevice.h>
#include <asm/bootinfo.h>
#include <asm/mach-adm5120/adm5120_info.h>
#include <asm/mach-adm5120/adm5120_board.h>
#include <asm/mach-adm5120/adm5120_platform.h>
-#include <asm/mach-adm5120/adm5120_irq.h>
extern void compex_generic_setup(void) __init;
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
+#include <linux/irq.h>
#include <linux/etherdevice.h>
#include <asm/bootinfo.h>
#include <asm/mach-adm5120/adm5120_board.h>
-#include <asm/mach-adm5120/adm5120_irq.h>
#include <asm/mach-adm5120/adm5120_platform.h>
extern void __init br61xx_generic_setup(void) __init;
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
+#include <linux/irq.h>
#include <linux/etherdevice.h>
#include <asm/bootinfo.h>
#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_irq.h>
#include <asm/mach-adm5120/adm5120_board.h>
#include <asm/mach-adm5120/adm5120_platform.h>
#include <asm/mach-adm5120/adm5120_info.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/irq.h>
#include <linux/etherdevice.h>
#include <asm/bootinfo.h>
#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_irq.h>
#include <asm/mach-adm5120/adm5120_nand.h>
#include <asm/mach-adm5120/adm5120_board.h>
#include <asm/mach-adm5120/adm5120_platform.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
+#include <linux/irq.h>
#include <asm/bootinfo.h>
#include <asm/mach-adm5120/adm5120_board.h>
#include <asm/mach-adm5120/adm5120_platform.h>
-#include <asm/mach-adm5120/adm5120_irq.h>
extern void p33x_generic_setup(void) __init;
#include <linux/ioport.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/irq.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-
#include <asm/mipsregs.h>
#include <asm/mach-adm5120/adm5120_info.h>
#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_irq.h>
#include <asm/mach-adm5120/adm5120_switch.h>
#include "adm5120sw.h"
* 2 of the License, or (at your option) any later version.
*
*/
-
#include <linux/module.h>
#include <linux/types.h>
#include <linux/fs.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
+#include <linux/irq.h>
#include <asm/bootinfo.h>
#include <asm/mach-adm5120/adm5120_info.h>
#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_irq.h>
#include <asm/mach-adm5120/adm5120_switch.h>
-
#define DEFAULT_TIMEOUT 15 /* (secs) Default is 15 seconds */
#define MAX_TIMEOUT 327
/* Max is 327 seconds, counter is 15-bit integer, step is 10 ms */
+++ /dev/null
-/*
- * ADM5120 specific IRQ numbers
- *
- * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-#ifndef _MACH_ADM5120_IRQ_H
-#define _MACH_ADM5120_IRQ_H
-
-#include <asm/mach-adm5120/adm5120_intc.h>
-
-#define MIPS_IRQ_HW0 2
-#define MIPS_IRQ_COUNTER 7
-#define MIPS_IRQ_COUNT 8
-
-#define ADM5120_CPU_IRQ_BASE 0
-#define ADM5120_INTC_IRQ_BASE (ADM5120_CPU_IRQ_BASE + MIPS_IRQ_COUNT)
-#define ADM5120_SWITCH_IRQ_BASE (ADM5120_INTC_IRQ_BASE + INTC_IRQ_COUNT)
-
-#define ADM5120_CPU_IRQ(x) (ADM5120_CPU_IRQ_BASE + (x))
-#define ADM5120_INTC_IRQ(x) (ADM5120_INTC_IRQ_BASE + (x))
-
-#define ADM5120_IRQ_INTC ADM5120_CPU_IRQ(MIPS_IRQ_HW0)
-#define ADM5120_IRQ_COUNTER ADM5120_CPU_IRQ(MIPS_IRQ_COUNTER)
-
-#define ADM5120_IRQ_TIMER ADM5120_INTC_IRQ(INTC_IRQ_TIMER)
-#define ADM5120_IRQ_UART0 ADM5120_INTC_IRQ(INTC_IRQ_UART0)
-#define ADM5120_IRQ_UART1 ADM5120_INTC_IRQ(INTC_IRQ_UART1)
-#define ADM5120_IRQ_USBC ADM5120_INTC_IRQ(INTC_IRQ_USBC)
-#define ADM5120_IRQ_GPIO2 ADM5120_INTC_IRQ(INTC_IRQ_GPIO2)
-#define ADM5120_IRQ_GPIO4 ADM5120_INTC_IRQ(INTC_IRQ_GPIO4)
-#define ADM5120_IRQ_PCI0 ADM5120_INTC_IRQ(INTC_IRQ_PCI0)
-#define ADM5120_IRQ_PCI1 ADM5120_INTC_IRQ(INTC_IRQ_PCI1)
-#define ADM5120_IRQ_PCI2 ADM5120_INTC_IRQ(INTC_IRQ_PCI2)
-#define ADM5120_IRQ_SWITCH ADM5120_INTC_IRQ(INTC_IRQ_SWITCH)
-
-#endif /* _MACH_ADM5120_IRQ_H */
--- /dev/null
+/*
+ * ADM5120 specific IRQ numbers
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+#ifndef _ASM_MIPS_MACH_ADM5120_IRQ_H
+#define _ASM_MIPS_MACH_ADM5120_IRQ_H
+
+#define MIPS_CPU_IRQ_BASE 0
+#define NR_IRQS 24
+
+#include_next <irq.h>
+
+#include <asm/mach-adm5120/adm5120_intc.h>
+
+#define NO_IRQ (-1)
+
+#define MIPS_CPU_IRQ_COUNT 8
+#define MIPS_CPU_IRQ(x) (MIPS_CPU_IRQ_BASE + (x))
+
+#define ADM5120_INTC_IRQ_BASE (MIPS_CPU_IRQ_BASE + MIPS_CPU_IRQ_COUNT)
+#define ADM5120_INTC_IRQ(x) (ADM5120_INTC_IRQ_BASE + (x))
+
+#define ADM5120_IRQ_INTC MIPS_CPU_IRQ(2)
+#define ADM5120_IRQ_COUNTER MIPS_CPU_IRQ(7)
+
+#define ADM5120_IRQ_TIMER ADM5120_INTC_IRQ(INTC_IRQ_TIMER)
+#define ADM5120_IRQ_UART0 ADM5120_INTC_IRQ(INTC_IRQ_UART0)
+#define ADM5120_IRQ_UART1 ADM5120_INTC_IRQ(INTC_IRQ_UART1)
+#define ADM5120_IRQ_USBC ADM5120_INTC_IRQ(INTC_IRQ_USBC)
+#define ADM5120_IRQ_GPIO2 ADM5120_INTC_IRQ(INTC_IRQ_GPIO2)
+#define ADM5120_IRQ_GPIO4 ADM5120_INTC_IRQ(INTC_IRQ_GPIO4)
+#define ADM5120_IRQ_PCI0 ADM5120_INTC_IRQ(INTC_IRQ_PCI0)
+#define ADM5120_IRQ_PCI1 ADM5120_INTC_IRQ(INTC_IRQ_PCI1)
+#define ADM5120_IRQ_PCI2 ADM5120_INTC_IRQ(INTC_IRQ_PCI2)
+#define ADM5120_IRQ_SWITCH ADM5120_INTC_IRQ(INTC_IRQ_SWITCH)
+
+#endif /* _ASM_MIPS_MACH_ADM5120_IRQ_H */