--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "rtl838x.dtsi"
+#include "rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi"
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "panasonic,m8eg-pn28080k", "realtek,rtl8380-soc";
+ model = "Panasonic Switch-M8eG PN28080K";
+
+ aliases {
+ led-boot = &led_status_eco_green;
+ led-failsafe = &led_status_eco_amber;
+ led-running = &led_status_eco_green;
+ led-upgrade = &led_status_eco_green;
+ };
+
+ sfp0: sfp-p9 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c0>;
+ tx-fault-gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ los-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&leds {
+ led_status_eco_amber: led-5 {
+ label = "amber:status_eco";
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <1>;
+ };
+
+ led_status_eco_green: led-6 {
+ label = "green:status_eco";
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <2>;
+ };
+};
+
+&i2c_gpio_0 {
+ scl-gpios = <&gpio0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c_gpio_1 {
+ scl-gpios = <&gpio0 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio0 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&gpio1 {
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&gpio2 {
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&i2c_switch {
+ i2c0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+};
+
+ðernet0 {
+ mdio-bus {
+ compatible = "realtek,rtl838x-mdio";
+ regmap = <ðernet0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ INTERNAL_PHY(8)
+ INTERNAL_PHY(9)
+ INTERNAL_PHY(10)
+ INTERNAL_PHY(11)
+ INTERNAL_PHY(12)
+ INTERNAL_PHY(13)
+ INTERNAL_PHY(14)
+ INTERNAL_PHY(15)
+
+ INTERNAL_PHY(24)
+ };
+};
+
+&switch0 {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ SWITCH_PORT(8, 1, internal)
+ SWITCH_PORT(9, 2, internal)
+ SWITCH_PORT(10, 3, internal)
+ SWITCH_PORT(11, 4, internal)
+ SWITCH_PORT(12, 5, internal)
+ SWITCH_PORT(13, 6, internal)
+ SWITCH_PORT(14, 7, internal)
+ SWITCH_PORT(15, 8, internal)
+
+ port@24 {
+ reg = <24>;
+ label = "lan9";
+ phy-mode = "1000base-x";
+ phy-handle = <&phy24>;
+ managed = "in-band-status";
+ sfp = <&sfp0>;
+ };
+
+ port@28 {
+ ethernet = <ðernet0>;
+ reg = <28>;
+ phy-mode = "internal";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,9600";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "amber:any_col";
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_FAULT;
+ };
+
+ led-1 {
+ label = "green:giga";
+ gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <1>;
+ };
+
+ led-2 {
+ label = "green:100m";
+ gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <2>;
+ };
+
+ led-3 {
+ label = "green:full";
+ gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <3>;
+ };
+
+ led-4 {
+ label = "green:loop_history";
+ gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <4>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ led_mode {
+ label = "led-mode";
+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+ };
+
+ gpio-restart {
+ compatible = "gpio-restart";
+ gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ i2c_gpio_0: i2c-gpio-0 {
+ compatible = "i2c-gpio";
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio1: gpio@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio2: gpio@75 {
+ compatible = "nxp,pca9539";
+ reg = <0x75>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ /*
+ * GPIO14 (IO1_6): Shift Register RESET (port LED)
+ * - Switch-M8eG PN28080K: 3x 74HC164
+ * - Switch-M24eG PN28240K: 6x 74HC164
+ * - Switch-M48eG PN28480K: 12x 74HC164
+ */
+ portled_sregister_reset {
+ gpio-hog;
+ gpios = <14 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "portled-sregister-reset";
+ };
+ };
+ };
+
+ i2c_gpio_1: i2c-gpio-1 {
+ compatible = "i2c-gpio";
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c_switch: i2c-switch@70 {
+ compatible = "nxp,pca9545";
+ reset-gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "u-boot-env";
+ reg = <0x80000 0x10000>;
+ };
+
+ partition@90000 {
+ label = "u-boot-env2";
+ reg = <0x90000 0x10000>;
+ };
+
+ partition@a0000 {
+ label = "sysinfo";
+ reg = <0xa0000 0x60000>;
+ read-only;
+ };
+
+ /*
+ * Filesystem area in stock firmware
+ * (0x100000-0x1DFFFFF)
+ *
+ * stock firmware images are required to pass
+ * the checking by the U-Boot, also for OpenWrt
+ *
+ * in OpenWrt:
+ * - 0x100000-0xDFFFFF (13M): stock images
+ * - 0xE00000-0x1DFFFFF(16M): OpenWrt image
+ */
+ partition@100000 {
+ label = "fs_reserved";
+ reg = <0x100000 0xd00000>;
+ };
+
+ partition@e00000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0xe00000 0x1000000>;
+ };
+
+ partition@1e00000 {
+ label = "vlog_data";
+ reg = <0x1e00000 0x100000>;
+ read-only;
+ };
+
+ partition@1f00000 {
+ label = "elog_data";
+ reg = <0x1f00000 0x100000>;
+ read-only;
+ };
+ };
+ };
+};
projects / openwrt / staging / chunkeey.git / commitdiff