ath79: cleanup DTS for ALLNET ALL-WAP02860AC

use qca955x_senao_loader.dtsi
because it is the same hardware / partitioning
and some cleanup

Effects:

nodes to match similar boards
 - keys
 - eth0
 - pcie0

bumps SPI frequency to 40 MHz

removes &pll node:
the property is defined in qca955x.dtsi

removes qca,no-eeprom:
has no effect with mtd-cal-data property
(also spelling)

Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Michael Pratt <mcpratt@pm.me>

diff --git a/target/linux/ath79/dts/qca9558_allnet_all-wap02860ac.dts b/target/linux/ath79/dts/qca9558_allnet_all-wap02860ac.dts
index 3afbc04ddf04a535c61ef51053648a7fef59fae6..5c6051d6f4b140dc7582feeb85f767113d77ee07 100644 (file)
--- a/target/linux/ath79/dts/qca9558_allnet_all-wap02860ac.dts
+++ b/target/linux/ath79/dts/qca9558_allnet_all-wap02860ac.dts
@@ -1,14 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "qca955x.dtsi"
+#include "qca955x_senao_loader.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/mtd/partitions/uimage.h>
 
 / {
-       model = "ALLNET ALL-WAP02860AC";
        compatible = "allnet,all-wap02860ac", "qca,qca9558";
+       model = "ALLNET ALL-WAP02860AC";
 
        aliases {
                label-mac-device = &eth0;
@@ -23,8 +22,9 @@
 
                reset {
                        label = "reset";
-                       linux,code = <KEY_RESTART>;
                        gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+                       linux,code = <KEY_RESTART>;
                };
        };
 
@@ -54,35 +54,17 @@
                        gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
                };
        };
-
-       virtual_flash {
-               compatible = "mtd-concat";
-
-               devices = <&fwconcat0 &fwconcat1>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               compatible = "openwrt,uimage", "denx,uimage";
-                               openwrt,ih-magic = <0x73714f4b>;
-                               label = "firmware";
-                               reg = <0x0 0x0>;
-                       };
-               };
-       };
 };
 
 &eth0 {
        status = "okay";
 
-       pll-data = <0x8e000000 0x80000101 0x80001313>;
+       mtd-mac-address = <&art 0x0>;
+
        phy-handle = <&phy5>;
-       phy-mode = "rgmii-rxid";
+       phy-mode = "rgmii-id";
 
-       mtd-mac-address = <&art 0x0>;
+       pll-data = <0x82000000 0x80000101 0x80001313>;
 };
 
 &mdio0 {
@@ -95,76 +77,20 @@
        };
 };
 
-&pcie0 {
-       status = "okay";
-
-       wifi@0,0 {
-               compatible = "qcom,ath10k";
-               reg = <0 0 0 0 0>;
+&partitions {
+       art: partition@ff0000 {
+               label = "art";
+               reg = <0xff0000 0x010000>;
+               read-only;
        };
 };
 
-&pll {
-       clocks = <&extosc>;
-};
-
-&spi {
+&pcie0 {
        status = "okay";
 
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x040000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               label = "u-boot-env";
-                               reg = <0x040000 0x010000>;
-                       };
-
-                       partition@50000 {
-                               label = "custom";
-                               reg = <0x050000 0x050000>;
-                               read-only;
-                       };
-
-                       partition@a0000 {
-                               label = "loader";
-                               reg = <0x0a0000 0x010000>;
-                       };
-
-                       fwconcat1: partition@b0000 {
-                               label = "fwconcat1";
-                               reg = <0x0b0000 0x170000>;
-                       };
-
-                       fwconcat0: partition@220000 {
-                               label = "fwconcat0";
-                               reg = <0x220000 0xb50000>;
-                       };
-
-                       partition@d70000 {
-                               label = "failsafe";
-                               reg = <0xd70000 0x280000>;
-                               read-only;
-                       };
-
-                       art: partition@ff0000 {
-                               label = "art";
-                               reg = <0xff0000 0x010000>;
-                               read-only;
-                       };
-               };
+       wifi@0,0,0 {
+               compatible = "qcom,ath10k";
+               reg = <0x0 0 0 0 0>;
        };
 };
 
@@ -174,5 +100,4 @@
        mtd-cal-data = <&art 0x1000>;
        mtd-mac-address = <&art 0x0>;
        mtd-mac-address-increment = <1>;
-       qca-no-eeprom;
 };