ath9k: Move TX99 config option under ath9k debugging

Since ATH9K_TX99 depends on ATH9K_DEBUGFS anyway move it there
such that "make menuconfig" will indent TX99 support below ath9k
debugging.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 40fa915d6f3571ec7c00c9395b0ac223adcf09ea..f68cb00450e0c5b37d315fdd6bafabd79fb3b917 100644 (file)
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -75,6 +75,26 @@ config ATH9K_STATION_STATISTICS
        ---help---
          This option enables detailed statistics for association stations.
 
+config ATH9K_TX99
+       bool "Atheros ath9k TX99 testing support"
+       depends on ATH9K_DEBUGFS && CFG80211_CERTIFICATION_ONUS
+       default n
+       ---help---
+         Say N. This should only be enabled on systems undergoing
+         certification testing and evaluation in a controlled environment.
+         Enabling this will only enable TX99 support, all other modes of
+         operation will be disabled.
+
+         TX99 support enables Specific Absorption Rate (SAR) testing.
+         SAR is the unit of measurement for the amount of radio frequency(RF)
+         absorbed by the body when using a wireless device. The RF exposure
+         limits used are expressed in the terms of SAR, which is a measure
+         of the electric and magnetic field strength and power density for
+         transmitters operating at frequencies from 300 kHz to 100 GHz.
+         Regulatory bodies around the world require that wireless device
+         be evaluated to meet the RF exposure limits set forth in the
+         governmental SAR regulations.
+
 config ATH9K_DFS_CERTIFIED
        bool "Atheros DFS support for certified platforms"
        depends on ATH9K && CFG80211_CERTIFICATION_ONUS
@@ -103,26 +123,6 @@ config ATH9K_DYNACK
          based on ACK frame RX timestamp, TX frame timestamp and frame
          duration
 
-config ATH9K_TX99
-       bool "Atheros ath9k TX99 testing support"
-       depends on ATH9K_DEBUGFS && CFG80211_CERTIFICATION_ONUS
-       default n
-       ---help---
-         Say N. This should only be enabled on systems undergoing
-         certification testing and evaluation in a controlled environment.
-         Enabling this will only enable TX99 support, all other modes of
-         operation will be disabled.
-
-         TX99 support enables Specific Absorption Rate (SAR) testing.
-         SAR is the unit of measurement for the amount of radio frequency(RF)
-         absorbed by the body when using a wireless device. The RF exposure
-         limits used are expressed in the terms of SAR, which is a measure
-         of the electric and magnetic field strength and power density for
-         transmitters operating at frequencies from 300 kHz to 100 GHz.
-         Regulatory bodies around the world require that wireless device
-         be evaluated to meet the RF exposure limits set forth in the
-         governmental SAR regulations.
-
 config ATH9K_WOW
        bool "Wake on Wireless LAN support (EXPERIMENTAL)"
        depends on ATH9K && PM