--- /dev/null
+--- /dev/null
++++ b/dts/upstream/src/arm64/rockchip/rk3588s-nanopi-r6s.dts
+@@ -0,0 +1,764 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++
++/dts-v1/;
++
++#include <dt-bindings/pinctrl/rockchip.h>
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include "rk3588s.dtsi"
++
++/ {
++ model = "FriendlyElec NanoPi R6S";
++ compatible = "friendlyarm,nanopi-r6s", "rockchip,rk3588s";
++
++ aliases {
++ ethernet0 = &gmac1;
++ mmc0 = &sdmmc;
++ mmc1 = &sdhci;
++ };
++
++ chosen {
++ stdout-path = "serial2:1500000n8";
++ };
++
++ adc-keys {
++ compatible = "adc-keys";
++ io-channels = <&saradc 0>;
++ io-channel-names = "buttons";
++ keyup-threshold-microvolt = <1800000>;
++ poll-interval = <100>;
++
++ button-maskrom {
++ label = "Maskrom";
++ linux,code = <KEY_VENDOR>;
++ press-threshold-microvolt = <1800>;
++ };
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ pinctrl-names = "default";
++ pinctrl-0 = <&key1_pin>;
++
++ button-user {
++ label = "User";
++ linux,code = <BTN_1>;
++ gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>;
++ debounce-interval = <50>;
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ sys_led: led-0 {
++ label = "sys_led";
++ gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "heartbeat";
++ pinctrl-names = "default";
++ pinctrl-0 = <&sys_led_pin>;
++ };
++
++ wan_led: led-1 {
++ label = "wan_led";
++ gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&wan_led_pin>;
++ };
++
++ lan1_led: led-2 {
++ label = "lan1_led";
++ gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&lan1_led_pin>;
++ };
++
++ lan2_led: led-3 {
++ label = "lan2_led";
++ gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&lan2_led_pin>;
++ };
++ };
++
++ vcc5v0_sys: vcc5v0-sys-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc5v0_sys";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ };
++
++ vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc_1v1_nldo_s3";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1100000>;
++ regulator-max-microvolt = <1100000>;
++ vin-supply = <&vcc5v0_sys>;
++ };
++
++ vcc_3v3_s0: vcc-3v3-s0-regulator {
++ compatible = "regulator-fixed";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc_3v3_s0";
++ vin-supply = <&vcc_3v3_s3>;
++ };
++
++ vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&sd_s0_pwr>;
++ regulator-name = "vcc_3v3_sd_s0";
++ regulator-boot-on;
++ regulator-max-microvolt = <3000000>;
++ regulator-min-microvolt = <3000000>;
++ vin-supply = <&vcc_3v3_s3>;
++ };
++
++ vcc_3v3_pcie20: vcc3v3-pcie20-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc_3v3_pcie20";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&vcc_3v3_s3>;
++ };
++
++ vcc5v0_usb: vcc5v0-usb-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc5v0_usb";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc5v0_sys>;
++ };
++
++ vcc5v0_usb_otg0: vcc5v0-usb-otg0-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&typec5v_pwren>;
++ regulator-name = "vcc5v0_usb_otg0";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc5v0_usb>;
++ };
++
++ vcc5v0_host_20: vcc5v0-host-20-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&vcc5v0_host20_en>;
++ regulator-name = "vcc5v0_host_20";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc5v0_usb>;
++ };
++};
++
++&combphy0_ps {
++ status = "okay";
++};
++
++&combphy2_psu {
++ status = "okay";
++};
++
++&cpu_b0 {
++ cpu-supply = <&vdd_cpu_big0_s0>;
++};
++
++&cpu_b1 {
++ cpu-supply = <&vdd_cpu_big0_s0>;
++};
++
++&cpu_b2 {
++ cpu-supply = <&vdd_cpu_big1_s0>;
++};
++
++&cpu_b3 {
++ cpu-supply = <&vdd_cpu_big1_s0>;
++};
++
++&cpu_l0 {
++ cpu-supply = <&vdd_cpu_lit_s0>;
++};
++
++&cpu_l1 {
++ cpu-supply = <&vdd_cpu_lit_s0>;
++};
++
++&cpu_l2 {
++ cpu-supply = <&vdd_cpu_lit_s0>;
++};
++
++&cpu_l3 {
++ cpu-supply = <&vdd_cpu_lit_s0>;
++};
++
++&gmac1 {
++ clock_in_out = "output";
++ phy-handle = <&rgmii_phy1>;
++ phy-mode = "rgmii-rxid";
++ pinctrl-0 = <&gmac1_miim
++ &gmac1_tx_bus2
++ &gmac1_rx_bus2
++ &gmac1_rgmii_clk
++ &gmac1_rgmii_bus>;
++ pinctrl-names = "default";
++ tx_delay = <0x42>;
++ status = "okay";
++};
++
++&i2c0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c0m2_xfer>;
++ status = "okay";
++
++ vdd_cpu_big0_s0: regulator@42 {
++ compatible = "rockchip,rk8602";
++ reg = <0x42>;
++ fcs,suspend-voltage-selector = <1>;
++ regulator-name = "vdd_cpu_big0_s0";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <550000>;
++ regulator-max-microvolt = <1050000>;
++ regulator-ramp-delay = <2300>;
++ vin-supply = <&vcc5v0_sys>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdd_cpu_big1_s0: regulator@43 {
++ compatible = "rockchip,rk8603", "rockchip,rk8602";
++ reg = <0x43>;
++ fcs,suspend-voltage-selector = <1>;
++ regulator-name = "vdd_cpu_big1_s0";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <550000>;
++ regulator-max-microvolt = <1050000>;
++ regulator-ramp-delay = <2300>;
++ vin-supply = <&vcc5v0_sys>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++};
++
++&i2c2 {
++ status = "okay";
++
++ vdd_npu_s0: regulator@42 {
++ compatible = "rockchip,rk8602";
++ reg = <0x42>;
++ fcs,suspend-voltage-selector = <1>;
++ regulator-name = "vdd_npu_s0";
++ regulator-min-microvolt = <550000>;
++ regulator-max-microvolt = <950000>;
++ regulator-ramp-delay = <2300>;
++ regulator-boot-on;
++ regulator-always-on;
++ vin-supply = <&vcc5v0_sys>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++};
++
++&i2c6 {
++ clock-frequency = <200000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c6m0_xfer>;
++ status = "okay";
++
++ hym8563: rtc@51 {
++ compatible = "haoyu,hym8563";
++ reg = <0x51>;
++ #clock-cells = <0>;
++ clock-output-names = "hym8563";
++ pinctrl-names = "default";
++ pinctrl-0 = <&rtc_int>;
++ interrupt-parent = <&gpio0>;
++ interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
++ wakeup-source;
++ };
++};
++
++&mdio1 {
++ rgmii_phy1: ethernet-phy@1 {
++ compatible = "ethernet-phy-id001c.c916";
++ reg = <0x1>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&rtl8211f_rst>;
++ reset-assert-us = <20000>;
++ reset-deassert-us = <100000>;
++ reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
++ };
++};
++
++&pcie2x1l1 {
++ reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
++ vpcie3v3-supply = <&vcc_3v3_pcie20>;
++ status = "okay";
++};
++
++&pcie2x1l2 {
++ reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
++ vpcie3v3-supply = <&vcc_3v3_pcie20>;
++ status = "okay";
++};
++
++&pinctrl {
++ gpio-key {
++ key1_pin: key1-pin {
++ rockchip,pins = <1 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ gpio-leds {
++ sys_led_pin: sys-led-pin {
++ rockchip,pins =
++ <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ wan_led_pin: wan-led-pin {
++ rockchip,pins =
++ <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ lan1_led_pin: lan1-led-pin {
++ rockchip,pins =
++ <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ lan2_led_pin: lan2-led-pin {
++ rockchip,pins =
++ <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ hym8563 {
++ rtc_int: rtc-int {
++ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ sdmmc {
++ sd_s0_pwr: sd-s0-pwr {
++ rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ usb {
++ typec5v_pwren: typec5v-pwren {
++ rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ vcc5v0_host20_en: vcc5v0-host20-en {
++ rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ rtl8211f {
++ rtl8211f_rst: rtl8211f-rst {
++ rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++};
++
++&saradc {
++ vref-supply = <&avcc_1v8_s0>;
++ status = "okay";
++};
++
++&sdhci {
++ bus-width = <8>;
++ no-sdio;
++ no-sd;
++ non-removable;
++ mmc-hs200-1_8v;
++ status = "okay";
++};
++
++&sdmmc {
++ bus-width = <4>;
++ cap-sd-highspeed;
++ disable-wp;
++ max-frequency = <150000000>;
++ no-mmc;
++ no-sdio;
++ sd-uhs-sdr104;
++ vmmc-supply = <&vcc_3v3_sd_s0>;
++ vqmmc-supply = <&vccio_sd_s0>;
++ status = "okay";
++};
++
++&spi2 {
++ status = "okay";
++ assigned-clocks = <&cru CLK_SPI2>;
++ assigned-clock-rates = <200000000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
++ num-cs = <1>;
++
++ pmic@0 {
++ compatible = "rockchip,rk806";
++ spi-max-frequency = <1000000>;
++ reg = <0x0>;
++
++ interrupt-parent = <&gpio0>;
++ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
++ <&rk806_dvs2_null>, <&rk806_dvs3_null>;
++
++ system-power-controller;
++
++ vcc1-supply = <&vcc5v0_sys>;
++ vcc2-supply = <&vcc5v0_sys>;
++ vcc3-supply = <&vcc5v0_sys>;
++ vcc4-supply = <&vcc5v0_sys>;
++ vcc5-supply = <&vcc5v0_sys>;
++ vcc6-supply = <&vcc5v0_sys>;
++ vcc7-supply = <&vcc5v0_sys>;
++ vcc8-supply = <&vcc5v0_sys>;
++ vcc9-supply = <&vcc5v0_sys>;
++ vcc10-supply = <&vcc5v0_sys>;
++ vcc11-supply = <&vcc_2v0_pldo_s3>;
++ vcc12-supply = <&vcc5v0_sys>;
++ vcc13-supply = <&vcc_1v1_nldo_s3>;
++ vcc14-supply = <&vcc_1v1_nldo_s3>;
++ vcca-supply = <&vcc5v0_sys>;
++
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ rk806_dvs1_null: dvs1-null-pins {
++ pins = "gpio_pwrctrl1";
++ function = "pin_fun0";
++ };
++
++ rk806_dvs2_null: dvs2-null-pins {
++ pins = "gpio_pwrctrl2";
++ function = "pin_fun0";
++ };
++
++ rk806_dvs3_null: dvs3-null-pins {
++ pins = "gpio_pwrctrl3";
++ function = "pin_fun0";
++ };
++
++ regulators {
++ vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
++ regulator-boot-on;
++ regulator-min-microvolt = <550000>;
++ regulator-max-microvolt = <950000>;
++ regulator-ramp-delay = <12500>;
++ regulator-name = "vdd_gpu_s0";
++ regulator-enable-ramp-delay = <400>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <550000>;
++ regulator-max-microvolt = <950000>;
++ regulator-ramp-delay = <12500>;
++ regulator-name = "vdd_cpu_lit_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdd_log_s0: dcdc-reg3 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <675000>;
++ regulator-max-microvolt = <750000>;
++ regulator-ramp-delay = <12500>;
++ regulator-name = "vdd_log_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ regulator-suspend-microvolt = <750000>;
++ };
++ };
++
++ vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <550000>;
++ regulator-max-microvolt = <950000>;
++ regulator-ramp-delay = <12500>;
++ regulator-name = "vdd_vdenc_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdd_ddr_s0: dcdc-reg5 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <675000>;
++ regulator-max-microvolt = <900000>;
++ regulator-ramp-delay = <12500>;
++ regulator-name = "vdd_ddr_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ regulator-suspend-microvolt = <850000>;
++ };
++ };
++
++ vdd2_ddr_s3: dcdc-reg6 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-name = "vdd2_ddr_s3";
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ };
++ };
++
++ vcc_2v0_pldo_s3: dcdc-reg7 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <2000000>;
++ regulator-max-microvolt = <2000000>;
++ regulator-ramp-delay = <12500>;
++ regulator-name = "vdd_2v0_pldo_s3";
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <2000000>;
++ };
++ };
++
++ vcc_3v3_s3: dcdc-reg8 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-name = "vcc_3v3_s3";
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <3300000>;
++ };
++ };
++
++ vddq_ddr_s0: dcdc-reg9 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-name = "vddq_ddr_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc_1v8_s3: dcdc-reg10 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-name = "vcc_1v8_s3";
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <1800000>;
++ };
++ };
++
++ avcc_1v8_s0: pldo-reg1 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-name = "avcc_1v8_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ regulator-suspend-microvolt = <1800000>;
++ };
++ };
++
++ vcc_1v8_s0: pldo-reg2 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-name = "vcc_1v8_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ regulator-suspend-microvolt = <1800000>;
++ };
++ };
++
++ avdd_1v2_s0: pldo-reg3 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1200000>;
++ regulator-max-microvolt = <1200000>;
++ regulator-name = "avdd_1v2_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ avcc_3v3_s0: pldo-reg4 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-ramp-delay = <12500>;
++ regulator-name = "avcc_3v3_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vccio_sd_s0: pldo-reg5 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-ramp-delay = <12500>;
++ regulator-name = "vccio_sd_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ pldo6_s3: pldo-reg6 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-name = "pldo6_s3";
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <1800000>;
++ };
++ };
++
++ vdd_0v75_s3: nldo-reg1 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <750000>;
++ regulator-max-microvolt = <750000>;
++ regulator-name = "vdd_0v75_s3";
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <750000>;
++ };
++ };
++
++ avdd_ddr_pll_s0: nldo-reg2 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <850000>;
++ regulator-max-microvolt = <850000>;
++ regulator-name = "avdd_ddr_pll_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ regulator-suspend-microvolt = <850000>;
++ };
++ };
++
++ avdd_0v75_s0: nldo-reg3 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <750000>;
++ regulator-max-microvolt = <750000>;
++ regulator-name = "avdd_0v75_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ avdd_0v85_s0: nldo-reg4 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <850000>;
++ regulator-max-microvolt = <850000>;
++ regulator-name = "avdd_0v85_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdd_0v75_s0: nldo-reg5 {
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <750000>;
++ regulator-max-microvolt = <750000>;
++ regulator-name = "vdd_0v75_s0";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++ };
++ };
++};
++
++&tsadc {
++ status = "okay";
++};
++
++&u2phy2 {
++ status = "okay";
++};
++
++&u2phy2_host {
++ phy-supply = <&vcc5v0_host_20>;
++ status = "okay";
++};
++
++&uart2 {
++ pinctrl-0 = <&uart2m0_xfer>;
++ status = "okay";
++};
++
++&usb_host0_ehci {
++ status = "okay";
++};
++
++&usb_host0_ohci {
++ status = "okay";
++};
projects / openwrt / staging / thess.git / commitdiff