ifeq ($(LINUX_VERSION),3.7.10)
LINUX_KERNEL_MD5SUM:=09624c3702107076efcac5e1cd8a18ec
endif
-ifeq ($(LINUX_VERSION),3.8.11)
- LINUX_KERNEL_MD5SUM:=3c4f4fc96bf702d1e9dfbf4d4b4cde9d
+ifeq ($(LINUX_VERSION),3.8.12)
+ LINUX_KERNEL_MD5SUM:=a4be720ca9e61445562565856bb5154d
endif
ifeq ($(LINUX_VERSION),3.9)
LINUX_KERNEL_MD5SUM:=4348c9b6b2eb3144d601e87c19d5d909
BOARD:=adm5120
BOARDNAME:=Infineon/ADMtek ADM5120
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
SUBTARGETS:=router_le router_be rb1xx
INITRAMFS_EXTRA_FILES:=
CFLAGS:=-Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves -mno-branch-likely
SUBTARGETS:=generic nand
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
include $(INCLUDE_DIR)/target.mk
FEATURES:=squashfs jffs2 targz ext2 usb
CFLAGS:=-Os -pipe -march=armv5te -mtune=arm926ej-s -fno-caller-saves
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
include $(INCLUDE_DIR)/target.mk
BOARDNAME:=Atheros AR231x/AR5312
FEATURES:=squashfs jffs2
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
include $(INCLUDE_DIR)/target.mk
FEATURES:=squashfs
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
include $(INCLUDE_DIR)/target.mk
BOARDNAME:=Broadcom BCM947xx/953xx
FEATURES:=squashfs usb pcmcia
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += wpad-mini kmod-switch kmod-diag nvram
BOARDNAME:=Broadcom BCM63xx
SUBTARGETS:=generic smp
FEATURES:=squashfs jffs2 usb atm pci pcmcia
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
include $(INCLUDE_DIR)/target.mk
case BCM63XX_FLASH_TYPE_PARALLEL:
/* read base address of boot chip select (0) */
val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-@@ -152,7 +165,7 @@ int __init bcm63xx_flash_register(void)
+@@ -154,7 +167,7 @@ int __init bcm63xx_flash_register(void)
return -ENODEV;
default:
pr_err("flash detection failed for BCM%x: %d\n",
FEATURES:=squashfs
CFLAGS:=-Os -pipe -march=armv4 -mtune=fa526 -fno-caller-saves
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
include $(INCLUDE_DIR)/target.mk
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1341,6 +1341,11 @@ MODULE_LICENSE ("GPL");
+@@ -1338,6 +1338,11 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_hcd_sead3_driver
#endif
CFLAGS:=-Os -pipe -march=armv6k -mtune=mpcore -mfloat-abi=softfp -mfpu=vfp -fno-caller-saves
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
include $(INCLUDE_DIR)/target.mk
CFLAGS:=-Os -pipe -march=armv4t -fno-caller-saves
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
DEVICE_TYPE:=developerboard
+module_exit(gpiommc_modexit);
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
-@@ -459,6 +459,31 @@ config MMC_SDHI
+@@ -449,6 +449,31 @@ config MMC_SDHI
This provides support for the SDHI SD/SDIO controller found in
SuperH and ARM SH-Mobile SoCs
FEATURES:=squashfs jffs2
SUBTARGETS=xway ase falcon
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
CFLAGS=-Os -pipe -mips32r2 -mtune=mips32r2 -fno-caller-saves -mno-branch-likely
INITRAMFS_EXTRA_FILES:=
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
DEVICE_TYPE:=developerboard
CFLAGS:=-Os -pipe -fno-caller-saves -mcpu=603e
FEATURES:=targz ext4
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
include $(INCLUDE_DIR)/target.mk
FEATURES:=squashfs targz
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
include $(INCLUDE_DIR)/target.mk
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
SUBTARGETS=generic p1020
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
include $(INCLUDE_DIR)/target.mk
CFLAGS:=-Os -pipe -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=softfp
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
include $(INCLUDE_DIR)/target.mk
CFLAGS:=-Os -pipe -fno-caller-saves -mcpu=405
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
include $(INCLUDE_DIR)/target.mk
CFLAGS:=-Os -pipe -fno-caller-saves -mcpu=440
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
include $(INCLUDE_DIR)/target.mk
CFLAGS:=-Os -pipe -fno-caller-saves -mno-branch-likely
FEATURES:=squashfs gpio
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES+=\
4 files changed, 81 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/ralink/pinmux.c
-Index: linux-3.8.11/arch/mips/ralink/Makefile
-===================================================================
---- linux-3.8.11.orig/arch/mips/ralink/Makefile 2013-05-03 17:53:16.612004798 +0200
-+++ linux-3.8.11/arch/mips/ralink/Makefile 2013-05-06 12:29:27.516615708 +0200
+--- a/arch/mips/ralink/Makefile
++++ b/arch/mips/ralink/Makefile
@@ -6,7 +6,7 @@
# Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
# Copyright (C) 2013 John Crispin <blogic@openwrt.org>
obj-$(CONFIG_SOC_RT288X) += rt288x.o
obj-$(CONFIG_SOC_RT305X) += rt305x.o
-Index: linux-3.8.11/arch/mips/ralink/common.h
-===================================================================
---- linux-3.8.11.orig/arch/mips/ralink/common.h 2013-05-03 17:53:16.720004800 +0200
-+++ linux-3.8.11/arch/mips/ralink/common.h 2013-05-06 12:29:27.108615690 +0200
-@@ -50,4 +50,6 @@
+--- a/arch/mips/ralink/common.h
++++ b/arch/mips/ralink/common.h
+@@ -50,4 +50,6 @@ extern void prom_soc_init(struct ralink_
__iomem void *plat_of_remap_node(const char *node);
+void ralink_pinmux(void);
+
#endif /* _RALINK_COMMON_H__ */
-Index: linux-3.8.11/arch/mips/ralink/of.c
-===================================================================
---- linux-3.8.11.orig/arch/mips/ralink/of.c 2013-05-03 17:53:16.780004804 +0200
-+++ linux-3.8.11/arch/mips/ralink/of.c 2013-05-06 12:29:27.108615690 +0200
-@@ -110,6 +110,8 @@
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
+@@ -110,6 +110,8 @@ static int __init plat_of_setup(void)
if (of_platform_populate(NULL, of_ids, NULL, NULL))
panic("failed to populate DT\n");
return 0;
}
-Index: linux-3.8.11/arch/mips/ralink/pinmux.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.11/arch/mips/ralink/pinmux.c 2013-05-06 12:29:41.212616302 +0200
+--- /dev/null
++++ b/arch/mips/ralink/pinmux.c
@@ -0,0 +1,77 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h
create mode 100644 drivers/gpio/gpio-ralink.c
-Index: linux-3.8.11/arch/mips/Kconfig
-===================================================================
---- linux-3.8.11.orig/arch/mips/Kconfig 2013-05-04 13:20:48.399042973 +0200
-+++ linux-3.8.11/arch/mips/Kconfig 2013-05-04 13:20:54.963043258 +0200
-@@ -449,6 +449,7 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -449,6 +449,7 @@ config RALINK
select SYS_HAS_EARLY_PRINTK
select HAVE_MACH_CLKDEV
select CLKDEV_LOOKUP
config SGI_IP22
bool "SGI IP22 (Indy/Indigo2)"
-Index: linux-3.8.11/arch/mips/include/asm/mach-ralink/gpio.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.11/arch/mips/include/asm/mach-ralink/gpio.h 2013-05-04 13:20:54.963043258 +0200
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ralink/gpio.h
@@ -0,0 +1,24 @@
+/*
+ * Ralink SoC GPIO API support
+#define gpio_to_irq __gpio_to_irq
+
+#endif /* __ASM_MACH_RALINK_GPIO_H */
-Index: linux-3.8.11/drivers/gpio/Kconfig
-===================================================================
---- linux-3.8.11.orig/drivers/gpio/Kconfig 2013-05-04 13:20:48.399042973 +0200
-+++ linux-3.8.11/drivers/gpio/Kconfig 2013-05-04 13:20:54.963043258 +0200
-@@ -201,6 +201,12 @@
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -201,6 +201,12 @@ config GPIO_PXA
help
Say yes here to support the PXA GPIO device
config GPIO_SPEAR_SPICS
bool "ST SPEAr13xx SPI Chip Select as GPIO support"
depends on PLAT_SPEAR
-Index: linux-3.8.11/drivers/gpio/Makefile
-===================================================================
---- linux-3.8.11.orig/drivers/gpio/Makefile 2013-05-04 13:20:48.399042973 +0200
-+++ linux-3.8.11/drivers/gpio/Makefile 2013-05-04 13:20:54.963043258 +0200
-@@ -54,6 +54,7 @@
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -54,6 +54,7 @@ obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf85
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o
-Index: linux-3.8.11/drivers/gpio/gpio-ralink.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.11/drivers/gpio/gpio-ralink.c 2013-05-06 11:39:24.816485479 +0200
+--- /dev/null
++++ b/drivers/gpio/gpio-ralink.c
@@ -0,0 +1,182 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
create mode 100644 drivers/net/ethernet/ramips/ramips_eth.h
create mode 100644 drivers/net/ethernet/ramips/ramips_main.c
-Index: linux-3.8.11/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.11/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h 2013-05-06 12:43:38.148652601 +0200
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
@@ -0,0 +1,27 @@
+/*
+ * Ralink RT305x SoC platform device registration
+};
+
+#endif /* _RT305X_ESW_PLATFORM_H */
-Index: linux-3.8.11/arch/mips/ralink/rt305x.c
-===================================================================
---- linux-3.8.11.orig/arch/mips/ralink/rt305x.c 2013-05-06 12:43:38.016652594 +0200
-+++ linux-3.8.11/arch/mips/ralink/rt305x.c 2013-05-06 12:43:38.148652601 +0200
-@@ -221,6 +221,7 @@
+--- a/arch/mips/ralink/rt305x.c
++++ b/arch/mips/ralink/rt305x.c
+@@ -221,6 +221,7 @@ void __init ralink_clk_init(void)
}
ralink_clk_add("cpu", cpu_rate);
ralink_clk_add("10000b00.spi", sys_rate);
ralink_clk_add("10000100.timer", wdt_rate);
ralink_clk_add("10000120.watchdog", wdt_rate);
-Index: linux-3.8.11/drivers/net/ethernet/Kconfig
-===================================================================
---- linux-3.8.11.orig/drivers/net/ethernet/Kconfig 2013-05-01 18:56:10.000000000 +0200
-+++ linux-3.8.11/drivers/net/ethernet/Kconfig 2013-05-06 12:43:38.148652601 +0200
-@@ -136,6 +136,7 @@
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -136,6 +136,7 @@ source "drivers/net/ethernet/packetengin
source "drivers/net/ethernet/pasemi/Kconfig"
source "drivers/net/ethernet/qlogic/Kconfig"
source "drivers/net/ethernet/racal/Kconfig"
source "drivers/net/ethernet/realtek/Kconfig"
source "drivers/net/ethernet/renesas/Kconfig"
source "drivers/net/ethernet/rdc/Kconfig"
-Index: linux-3.8.11/drivers/net/ethernet/Makefile
-===================================================================
---- linux-3.8.11.orig/drivers/net/ethernet/Makefile 2013-05-01 18:56:10.000000000 +0200
-+++ linux-3.8.11/drivers/net/ethernet/Makefile 2013-05-06 12:43:38.148652601 +0200
-@@ -54,6 +54,7 @@
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -54,6 +54,7 @@ obj-$(CONFIG_NET_PACKET_ENGINE) += packe
obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
obj-$(CONFIG_SH_ETH) += renesas/
obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
-Index: linux-3.8.11/drivers/net/ethernet/ramips/Kconfig
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.11/drivers/net/ethernet/ramips/Kconfig 2013-05-06 12:43:38.148652601 +0200
+--- /dev/null
++++ b/drivers/net/ethernet/ramips/Kconfig
@@ -0,0 +1,18 @@
+config NET_RAMIPS
+ tristate "Ralink RT288X/RT3X5X/RT3662/RT3883 ethernet driver"
+ depends on DEBUG_FS
+
+endif
-Index: linux-3.8.11/drivers/net/ethernet/ramips/Makefile
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.11/drivers/net/ethernet/ramips/Makefile 2013-05-06 12:43:38.148652601 +0200
+--- /dev/null
++++ b/drivers/net/ethernet/ramips/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the Ramips SoCs built-in ethernet macs
+ramips-$(CONFIG_NET_RAMIPS_DEBUG_FS) += ramips_debugfs.o
+
+obj-$(CONFIG_NET_RAMIPS) += ramips.o
-Index: linux-3.8.11/drivers/net/ethernet/ramips/ramips_debugfs.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.11/drivers/net/ethernet/ramips/ramips_debugfs.c 2013-05-06 12:43:38.148652601 +0200
+--- /dev/null
++++ b/drivers/net/ethernet/ramips/ramips_debugfs.c
@@ -0,0 +1,127 @@
+/*
+ * Ralink SoC ethernet driver debugfs code
+ debugfs_remove(raeth_debugfs_root);
+ raeth_debugfs_root = NULL;
+}
-Index: linux-3.8.11/drivers/net/ethernet/ramips/ramips_esw.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.11/drivers/net/ethernet/ramips/ramips_esw.c 2013-05-06 12:43:38.148652601 +0200
+--- /dev/null
++++ b/drivers/net/ethernet/ramips/ramips_esw.c
@@ -0,0 +1,1221 @@
+#include <linux/ioport.h>
+#include <linux/switch.h>
+{
+ platform_driver_unregister(&rt305x_esw_driver);
+}
-Index: linux-3.8.11/drivers/net/ethernet/ramips/ramips_eth.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.11/drivers/net/ethernet/ramips/ramips_eth.h 2013-05-06 12:43:38.152652600 +0200
+--- /dev/null
++++ b/drivers/net/ethernet/ramips/ramips_eth.h
@@ -0,0 +1,375 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+#endif /* CONFIG_NET_RAMIPS_DEBUG_FS */
+
+#endif /* RAMIPS_ETH_H */
-Index: linux-3.8.11/drivers/net/ethernet/ramips/ramips_main.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.11/drivers/net/ethernet/ramips/ramips_main.c 2013-05-06 13:55:12.572838852 +0200
+--- /dev/null
++++ b/drivers/net/ethernet/ramips/ramips_main.c
@@ -0,0 +1,1281 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
create mode 100644 arch/mips/ralink/rt305x-usb.c
create mode 100644 arch/mips/ralink/rt3883-usb.c
-Index: linux-3.8.11/arch/mips/ralink/Makefile
-===================================================================
---- linux-3.8.11.orig/arch/mips/ralink/Makefile 2013-05-06 09:58:57.772224085 +0200
-+++ linux-3.8.11/arch/mips/ralink/Makefile 2013-05-06 10:01:59.252231955 +0200
+--- a/arch/mips/ralink/Makefile
++++ b/arch/mips/ralink/Makefile
@@ -9,8 +9,8 @@
obj-y := prom.o of.o reset.o clk.o irq.o pinmux.o timer.o
obj-$(CONFIG_SOC_MT7620) += mt7620.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-Index: linux-3.8.11/arch/mips/ralink/common.h
-===================================================================
---- linux-3.8.11.orig/arch/mips/ralink/common.h 2013-05-06 09:58:57.748224086 +0200
-+++ linux-3.8.11/arch/mips/ralink/common.h 2013-05-06 09:58:58.100224099 +0200
-@@ -51,5 +51,6 @@
+--- a/arch/mips/ralink/common.h
++++ b/arch/mips/ralink/common.h
+@@ -51,5 +51,6 @@ extern void prom_soc_init(struct ralink_
__iomem void *plat_of_remap_node(const char *node);
void ralink_pinmux(void);
+void ralink_usb_platform(void);
#endif /* _RALINK_COMMON_H__ */
-Index: linux-3.8.11/arch/mips/ralink/mt7620.c
-===================================================================
---- linux-3.8.11.orig/arch/mips/ralink/mt7620.c 2013-05-06 09:58:57.696224079 +0200
-+++ linux-3.8.11/arch/mips/ralink/mt7620.c 2013-05-06 09:58:58.100224099 +0200
-@@ -140,6 +140,11 @@
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -140,6 +140,11 @@ struct ralink_pinmux rt_gpio_pinmux = {
.uart_mask = MT7620_GPIO_MODE_GPIO,
};
void __init ralink_clk_init(void)
{
unsigned long cpu_rate, sys_rate;
-Index: linux-3.8.11/arch/mips/ralink/of.c
-===================================================================
---- linux-3.8.11.orig/arch/mips/ralink/of.c 2013-05-06 09:58:57.748224086 +0200
-+++ linux-3.8.11/arch/mips/ralink/of.c 2013-05-06 10:01:59.252231955 +0200
-@@ -111,6 +111,7 @@
+--- a/arch/mips/ralink/of.c
++++ b/arch/mips/ralink/of.c
+@@ -111,6 +111,7 @@ static int __init plat_of_setup(void)
panic("failed to populate DT\n");
ralink_pinmux();
return 0;
}
-Index: linux-3.8.11/arch/mips/ralink/rt305x-usb.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.11/arch/mips/ralink/rt305x-usb.c 2013-05-06 09:58:58.100224099 +0200
+--- /dev/null
++++ b/arch/mips/ralink/rt305x-usb.c
@@ -0,0 +1,120 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ &rt3352_ehci_data, &rt3352_ehci_dmamask);
+ }
+}
-Index: linux-3.8.11/arch/mips/ralink/rt3883-usb.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.8.11/arch/mips/ralink/rt3883-usb.c 2013-05-06 09:58:58.100224099 +0200
+--- /dev/null
++++ b/arch/mips/ralink/rt3883-usb.c
@@ -0,0 +1,118 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ ralink_add_usb("ehci-platform",
+ &rt3883_ehci_data, &rt3883_ehci_dmamask);
+}
-Index: linux-3.8.11/arch/mips/ralink/rt288x.c
-===================================================================
---- linux-3.8.11.orig/arch/mips/ralink/rt288x.c 2013-05-06 09:58:57.644224079 +0200
-+++ linux-3.8.11/arch/mips/ralink/rt288x.c 2013-05-06 10:02:32.216233389 +0200
-@@ -74,6 +74,11 @@
+--- a/arch/mips/ralink/rt288x.c
++++ b/arch/mips/ralink/rt288x.c
+@@ -74,6 +74,11 @@ struct ralink_pinmux rt_gpio_pinmux = {
.wdt_reset = rt288x_wdt_reset,
};
include/linux/gpio.h | 23 ++++++++-
5 files changed, 160 insertions(+), 8 deletions(-)
-Index: linux-3.8.11/Documentation/devicetree/bindings/gpio/gpio.txt
-===================================================================
---- linux-3.8.11.orig/Documentation/devicetree/bindings/gpio/gpio.txt 2013-05-01 18:56:10.000000000 +0200
-+++ linux-3.8.11/Documentation/devicetree/bindings/gpio/gpio.txt 2013-05-06 12:43:38.252652605 +0200
-@@ -112,3 +112,63 @@
+--- a/Documentation/devicetree/bindings/gpio/gpio.txt
++++ b/Documentation/devicetree/bindings/gpio/gpio.txt
+@@ -112,3 +112,63 @@ where,
The pinctrl node must have "#gpio-range-cells" property to show number of
arguments to pass with phandle from gpio controllers node.
+ gpio-export,output = <1>;
+ };
+};
-Index: linux-3.8.11/drivers/gpio/gpiolib-of.c
-===================================================================
---- linux-3.8.11.orig/drivers/gpio/gpiolib-of.c 2013-05-01 18:56:10.000000000 +0200
-+++ linux-3.8.11/drivers/gpio/gpiolib-of.c 2013-05-06 13:35:56.452788709 +0200
+--- a/drivers/gpio/gpiolib-of.c
++++ b/drivers/gpio/gpiolib-of.c
@@ -21,6 +21,8 @@
#include <linux/of_gpio.h>
#include <linux/pinctrl/pinctrl.h>
/* Private data structure for of_gpiochip_find_and_xlate */
struct gg_data {
-@@ -288,3 +290,69 @@
+@@ -288,3 +290,69 @@ void of_gpiochip_remove(struct gpio_chip
if (chip->of_node)
of_node_put(chip->of_node);
}
+ return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe);
+}
+device_initcall(of_gpio_export_init);
-Index: linux-3.8.11/drivers/gpio/gpiolib.c
-===================================================================
---- linux-3.8.11.orig/drivers/gpio/gpiolib.c 2013-05-01 18:56:10.000000000 +0200
-+++ linux-3.8.11/drivers/gpio/gpiolib.c 2013-05-06 13:31:35.060777376 +0200
-@@ -714,9 +714,10 @@
+--- a/drivers/gpio/gpiolib.c
++++ b/drivers/gpio/gpiolib.c
+@@ -714,9 +714,10 @@ static struct class gpio_class = {
/**
* Context: arch_initcall or later
*
* When drivers want to make a GPIO accessible to userspace after they
-@@ -728,7 +729,7 @@
+@@ -728,7 +729,7 @@ static struct class gpio_class = {
*
* Returns zero on success, else an error.
*/
{
unsigned long flags;
struct gpio_desc *desc;
-@@ -762,6 +763,8 @@
+@@ -762,6 +763,8 @@ int gpio_export(unsigned gpio, bool dire
goto fail_unlock;
}
if (!desc->chip->direction_input || !desc->chip->direction_output)
direction_may_change = false;
spin_unlock_irqrestore(&gpio_lock, flags);
-@@ -804,7 +807,7 @@
+@@ -804,7 +807,7 @@ fail_unlock:
pr_debug("%s: gpio%d status %d\n", __func__, gpio, status);
return status;
}
static int match_export(struct device *dev, void *data)
{
-@@ -1418,6 +1421,9 @@
+@@ -1418,6 +1421,9 @@ int gpio_request_one(unsigned gpio, unsi
if (flags & GPIOF_OPEN_SOURCE)
set_bit(FLAG_OPEN_SOURCE, &gpio_desc[gpio].flags);
if (flags & GPIOF_DIR_IN)
err = gpio_direction_input(gpio);
else
-Index: linux-3.8.11/include/asm-generic/gpio.h
-===================================================================
---- linux-3.8.11.orig/include/asm-generic/gpio.h 2013-05-01 18:56:10.000000000 +0200
-+++ linux-3.8.11/include/asm-generic/gpio.h 2013-05-06 12:43:38.252652605 +0200
-@@ -204,7 +204,8 @@
+--- a/include/asm-generic/gpio.h
++++ b/include/asm-generic/gpio.h
+@@ -204,7 +204,8 @@ void devm_gpio_free(struct device *dev,
* A sysfs interface can be exported by individual drivers if they want,
* but more typically is configured entirely from userspace.
*/
extern int gpio_export_link(struct device *dev, const char *name,
unsigned gpio);
extern int gpio_sysfs_set_active_low(unsigned gpio, int value);
-@@ -249,7 +250,8 @@
+@@ -249,7 +250,8 @@ struct device;
/* sysfs support is only available with gpiolib, where it's optional */
{
return -ENOSYS;
}
-Index: linux-3.8.11/include/linux/gpio.h
-===================================================================
---- linux-3.8.11.orig/include/linux/gpio.h 2013-05-01 18:56:10.000000000 +0200
-+++ linux-3.8.11/include/linux/gpio.h 2013-05-06 13:32:59.796781050 +0200
+--- a/include/linux/gpio.h
++++ b/include/linux/gpio.h
@@ -27,6 +27,9 @@
#define GPIOF_EXPORT_DIR_FIXED (GPIOF_EXPORT)
#define GPIOF_EXPORT_DIR_CHANGEABLE (GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE)
/**
* struct gpio - a structure describing a GPIO with configuration
* @gpio: the GPIO number
-@@ -189,7 +192,8 @@
+@@ -189,7 +192,8 @@ static inline void gpio_set_value_cansle
WARN_ON(1);
}
{
/* GPIO can never have been requested or set as {in,out}put */
WARN_ON(1);
-@@ -248,4 +252,24 @@
+@@ -248,4 +252,24 @@ gpiochip_remove_pin_ranges(struct gpio_c
#endif /* ! CONFIG_GENERIC_GPIO */
BOARDNAME:=Mikrotik RouterBoard 532
FEATURES:=jffs2 pci targz broken
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += wpad-mini kmod-madwifi kmod-input-rb532
CFLAGS:=-Os -pipe -march=armv6k -mtune=mpcore -mfloat-abi=softfp -mfpu=vfp -fno-caller-saves
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
DEVICE_TYPE:=developerboard
FEATURES:=ext4 audio
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
include $(INCLUDE_DIR)/target.mk
kmod-ledtrig-heartbeat kmod-ledtrig-gpio \
kmod-ledtrig-netdev \
kmod-cpu-msr hwclock wpad
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
CS5535_MASK:=0x0b000042
CFLAGS += -march=geode -Os -mmmx -m3dnow -fno-align-jumps -fno-align-functions \
BOARDNAME:=Generic
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
define Target/Description
Build firmware images for x86 based boards
kmod-cpu-msr \
soloscli linux-atm br2684ctl ppp-mod-pppoa pppdump pppstats \
hwclock wpad flashrom tc
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
CS5535_MASK:=0x0E000048
CFLAGS += -march=geode -Os -mmmx -m3dnow -fno-align-jumps -fno-align-functions \
FEATURES:=jffs2 targz ubifs audio broken
SUBTARGETS:=qi_lb60 n516 n526 id800wt
-LINUX_VERSION:=3.8.11
+LINUX_VERSION:=3.8.12
DEVICE_TYPE=other
projects / openwrt / staging / blocktrron.git / commitdiff