* RouterBoard 500 Platform devices
*
* Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * $Id$
*/
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/module.h>
#include <linux/ctype.h>
#include <linux/string.h>
#include <linux/platform_device.h>
-#include <asm/unaligned.h>
-#include <asm/io.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
#include <asm/rc32434/rc32434.h>
#include <asm/rc32434/dma.h>
#include <asm/rc32434/rb.h>
#define ETH0_DMA_RX_IRQ GROUP1_IRQ_BASE + 0
-#define ETH0_DMA_TX_IRQ GROUP1_IRQ_BASE + 1
+#define ETH0_DMA_TX_IRQ GROUP1_IRQ_BASE + 1
#define ETH0_RX_OVR_IRQ GROUP3_IRQ_BASE + 9
#define ETH0_TX_UND_IRQ GROUP3_IRQ_BASE + 10
#define ETH0_RX_DMA_ADDR (DMA0_PhysicalAddress + 0*DMA_CHAN_OFFSET)
#define ETH0_TX_DMA_ADDR (DMA0_PhysicalAddress + 1*DMA_CHAN_OFFSET)
+/* NAND definitions */
+#define MEM32(x) *((volatile unsigned *) (x))
+
+#define GPIO_RDY (1 << 0x08)
+#define GPIO_WPX (1 << 0x09)
+#define GPIO_ALE (1 << 0x0a)
+#define GPIO_CLE (1 << 0x0b)
+
+extern char* board_type;
+
static struct resource korina_dev0_res[] = {
{
- .name = "korina_regs",
+ .name = "korina_regs",
.start = ETH0_PhysicalAddress,
- .end = ETH0_PhysicalAddress + sizeof(ETH_t),
+ .end = ETH0_PhysicalAddress + sizeof(ETH_t),
.flags = IORESOURCE_MEM,
- },
- {
- .name = "korina_rx",
+ }, {
+ .name = "korina_rx",
.start = ETH0_DMA_RX_IRQ,
- .end = ETH0_DMA_RX_IRQ,
+ .end = ETH0_DMA_RX_IRQ,
.flags = IORESOURCE_IRQ
- },
- {
- .name = "korina_tx",
+ }, {
+ .name = "korina_tx",
.start = ETH0_DMA_TX_IRQ,
- .end = ETH0_DMA_TX_IRQ,
+ .end = ETH0_DMA_TX_IRQ,
.flags = IORESOURCE_IRQ
- },
- {
- .name = "korina_ovr",
+ }, {
+ .name = "korina_ovr",
.start = ETH0_RX_OVR_IRQ,
- .end = ETH0_RX_OVR_IRQ,
+ .end = ETH0_RX_OVR_IRQ,
.flags = IORESOURCE_IRQ
- },
- {
- .name = "korina_und",
+ }, {
+ .name = "korina_und",
.start = ETH0_TX_UND_IRQ,
- .end = ETH0_TX_UND_IRQ,
+ .end = ETH0_TX_UND_IRQ,
.flags = IORESOURCE_IRQ
- },
- {
- .name = "korina_dma_rx",
+ }, {
+ .name = "korina_dma_rx",
.start = ETH0_RX_DMA_ADDR,
- .end = ETH0_RX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
+ .end = ETH0_RX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
.flags = IORESOURCE_MEM,
- },
- {
- .name = "korina_dma_tx",
+ }, {
+ .name = "korina_dma_tx",
.start = ETH0_TX_DMA_ADDR,
- .end = ETH0_TX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
+ .end = ETH0_TX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
.flags = IORESOURCE_MEM,
- }
+ }
};
static struct korina_device korina_dev0_data = {
.name = "korina0",
- .mac = { 0xde, 0xca, 0xff, 0xc0, 0xff, 0xee }
+ .mac = {0xde, 0xca, 0xff, 0xc0, 0xff, 0xee}
};
static struct platform_device korina_dev0 = {
.num_resources = ARRAY_SIZE(korina_dev0_res),
};
-
#define CF_GPIO_NUM 13
static struct resource cf_slot0_res[] = {
{
- .name = "cf_membase",
+ .name = "cf_membase",
.flags = IORESOURCE_MEM
- },
- {
- .name = "cf_irq",
- .start = (8 + 4 * 32 + CF_GPIO_NUM), /* 149 */
- .end = (8 + 4 * 32 + CF_GPIO_NUM),
+ }, {
+ .name = "cf_irq",
+ .start = (8 + 4 * 32 + CF_GPIO_NUM), /* 149 */
+ .end = (8 + 4 * 32 + CF_GPIO_NUM),
.flags = IORESOURCE_IRQ
}
};
};
/* Resources and device for NAND. There is no data needed and no irqs, so just define the memory used. */
+int rb500_dev_ready(struct mtd_info *mtd)
+{
+ return MEM32(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
+}
+
+void rb500_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd->priv;
+ unsigned char orbits, nandbits;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+
+ orbits = (ctrl & NAND_CLE) << 1;
+ orbits |= (ctrl & NAND_ALE) >> 1;
+
+ nandbits = (~ctrl & NAND_CLE) << 1;
+ nandbits |= (~ctrl & NAND_ALE) >> 1;
+
+ changeLatchU5(orbits, nandbits);
+ }
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, chip->IO_ADDR_W);
+}
+
static struct resource nand_slot0_res[] = {
{
.name = "nand_membase",
- .start = 0x18a20000,
- .end = (0x18a20000+0x1000)-1,
- .flags = IORESOURCE_MEM
+ .flags = IORESOURCE_MEM
}
};
-
+
+struct platform_nand_data rb500_nand_data = {
+ .ctrl.dev_ready = rb500_dev_ready,
+ .ctrl.cmd_ctrl = rb500_cmd_ctrl,
+};
+
static struct platform_device nand_slot0 = {
.id = 0,
- .name = "rb500-nand",
+ .name = "gen_nand",
.resource = nand_slot0_res,
.num_resources = ARRAY_SIZE(nand_slot0_res),
+ .dev.platform_data = &rb500_nand_data,
};
-static struct platform_device rb500led = {
- .name = "rb500-led",
- .id = 0,
+static struct mtd_partition rb500_partition_info[] = {
+ {
+ .name = "Routerboard NAND boot",
+ .offset = 0,
+ .size = 4 * 1024 * 1024,
+ }, {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ }
};
static struct platform_device *rb500_devs[] = {
&korina_dev0,
&nand_slot0,
- &cf_slot0,
- &rb500led
+ &cf_slot0
};
-static void __init parse_mac_addr(char* macstr)
+static void __init parse_mac_addr(char *macstr)
{
int i, j;
unsigned char result, value;
-
- for (i=0; i<6; i++) {
+
+ for (i = 0; i < 6; i++) {
result = 0;
- if (i != 5 && *(macstr+2) != ':') {
+
+ if (i != 5 && *(macstr + 2) != ':')
return;
- }
- for (j=0; j<2; j++) {
- if (isxdigit(*macstr) && (value = isdigit(*macstr) ? *macstr-'0' :
- toupper(*macstr)-'A'+10) < 16) {
- result = result*16 + value;
+
+ for (j = 0; j < 2; j++) {
+ if (isxdigit(*macstr)
+ && (value =
+ isdigit(*macstr) ? *macstr -
+ '0' : toupper(*macstr) - 'A' + 10) < 16) {
+ result = result * 16 + value;
macstr++;
- }
- else return;
+ } else
+ return;
}
-
- macstr++;
+
+ macstr++;
korina_dev0_data.mac[i] = result;
}
}
#define CFG_DC_DEVC 0x8
#define CFG_DC_DEVTC 0xC
+/* NAND definitions */
+#define NAND_CHIP_DELAY 25
+
+static void __init rb500_nand_setup(void)
+{
+ if (!strcmp(board_type, "500r5"))
+ changeLatchU5(LO_FOFF | LO_CEX, LO_ULED | LO_ALE | LO_CLE | LO_WPX);
+ else
+ changeLatchU5(LO_WPX | LO_FOFF | LO_CEX, LO_ULED | LO_ALE | LO_CLE);
+}
+
static int __init plat_setup_devices(void)
{
if (!readl(CFG_DC_DEV1 + CFG_DC_DEVMASK))
rb500_devs[1] = NULL;
else {
- cf_slot0_res[0].start = readl(CFG_DC_DEV1 + CFG_DC_DEVBASE);
+ cf_slot0_res[0].start =
+ readl(CFG_DC_DEV1 + CFG_DC_DEVBASE);
cf_slot0_res[0].end = cf_slot0_res[0].start + 0x1000;
}
-
- /* There is always a NAND device */
- nand_slot0_res[0].start = readl( CFG_DC_DEV2 + CFG_DC_DEVBASE);
+
+ /* Initialise the NAND device */
+ rb500_nand_setup();
+
+ /* Read the NAND resources from the device controller */
+ nand_slot0_res[0].start = readl(CFG_DC_DEV2 + CFG_DC_DEVBASE);
nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000;
-
+
+ /* Setup NAND specific settings */
+ rb500_nand_data.chip.nr_chips = 1;
+ rb500_nand_data.chip.nr_partitions = ARRAY_SIZE(rb500_partition_info);
+ rb500_nand_data.chip.partitions = rb500_partition_info;
+ rb500_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
+ rb500_nand_data.chip.options = NAND_NO_AUTOINCR;
+
return platform_add_devices(rb500_devs, ARRAY_SIZE(rb500_devs));
}
static int __init setup_kmac(char *s)
{
- printk("korina mac = %s\n",s);
+ printk("korina mac = %s\n", s);
parse_mac_addr(s);
- return 0;
+ return 0;
}
__setup("kmac=", setup_kmac);
-arch_initcall(plat_setup_devices);
-
+arch_initcall(plat_setup_devices);
projects / openwrt / svn-archive / openwrt.git / commitdiff