- Rename old P1010RDB board as P1010RDB-PA.
- Add support for new P1010RDB-PB board.
- Some optimization.
For more details, see board/freescale/p1010rdb/README.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
[York Sun: fix conflicts in boards.cfg]
Acked-by: York Sun <yorksun@freescale.com>
enum {
MUX_TYPE_IFC,
MUX_TYPE_SDHC,
+ MUX_TYPE_SPIFLASH,
+ MUX_TYPE_TDM,
+ MUX_TYPE_CAN,
+ MUX_TYPE_CS0_NOR,
+ MUX_TYPE_CS0_NAND,
+};
+
+enum {
+ I2C_READ_BANK,
+ I2C_READ_PCB_VER,
};
static uint sd_ifc_mux;
struct cpld_data {
u8 cpld_ver; /* cpld revision */
+#if defined(CONFIG_P1010RDB_PA)
u8 pcba_ver; /* pcb revision number */
u8 twindie_ddr3;
u8 res1[6];
u8 por1; /* POR Options */
u8 por2; /* POR Options */
u8 por3; /* POR Options */
+#elif defined(CONFIG_P1010RDB_PB)
+ u8 rom_loc;
+#endif
};
int board_early_init_f(void)
ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u8 tmp;
+#if defined(CONFIG_P1010RDB_PA)
+ struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
+
switch (ctrl_type) {
case MUX_TYPE_IFC:
i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
clrsetbits_be32(&gur->pmuxcr, PMUXCR1_SDHC_MASK,
PMUXCR1_SDHC_ENABLE);
break;
+ case MUX_TYPE_SPIFLASH:
+ out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_FLASH);
+ break;
+ case MUX_TYPE_TDM:
+ out_8(&cpld_data->tdm_can_sel, MUX_CPLD_TDM);
+ out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_SLIC);
+ break;
+ case MUX_TYPE_CAN:
+ out_8(&cpld_data->tdm_can_sel, MUX_CPLD_CAN_UART);
+ break;
default:
break;
}
+#elif defined(CONFIG_P1010RDB_PB)
+ uint orig_bus = i2c_get_bus_num();
+ i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
+ switch (ctrl_type) {
+ case MUX_TYPE_IFC:
+ i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
+ clrbits_8(&tmp, 0x04);
+ i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
+ i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ clrbits_8(&tmp, 0x04);
+ i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ sd_ifc_mux = MUX_TYPE_IFC;
+ clrbits_be32(&gur->pmuxcr, PMUXCR1_IFC_MASK);
+ break;
+ case MUX_TYPE_SDHC:
+ i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
+ setbits_8(&tmp, 0x04);
+ i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
+ i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ clrbits_8(&tmp, 0x04);
+ i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ sd_ifc_mux = MUX_TYPE_SDHC;
+ clrsetbits_be32(&gur->pmuxcr, PMUXCR1_SDHC_MASK,
+ PMUXCR1_SDHC_ENABLE);
+ break;
+ case MUX_TYPE_SPIFLASH:
+ i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
+ clrbits_8(&tmp, 0x80);
+ i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
+ i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ clrbits_8(&tmp, 0x80);
+ i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ break;
+ case MUX_TYPE_TDM:
+ i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
+ setbits_8(&tmp, 0x82);
+ i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
+ i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ clrbits_8(&tmp, 0x82);
+ i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ break;
+ case MUX_TYPE_CAN:
+ i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
+ clrbits_8(&tmp, 0x02);
+ i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
+ i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ clrbits_8(&tmp, 0x02);
+ i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ break;
+ case MUX_TYPE_CS0_NOR:
+ i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
+ clrbits_8(&tmp, 0x08);
+ i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
+ i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ clrbits_8(&tmp, 0x08);
+ i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ break;
+ case MUX_TYPE_CS0_NAND:
+ i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
+ setbits_8(&tmp, 0x08);
+ i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
+ i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ clrbits_8(&tmp, 0x08);
+ i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+ break;
+ default:
+ break;
+ }
+ i2c_set_bus_num(orig_bus);
+#endif
return 0;
}
+#ifdef CONFIG_P1010RDB_PB
+int i2c_pca9557_read(int type)
+{
+ u8 val;
+
+ i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
+ i2c_read(I2C_PCA9557_ADDR2, 0, 1, &val, 1);
+
+ switch (type) {
+ case I2C_READ_BANK:
+ val = (val & 0x10) >> 4;
+ break;
+ case I2C_READ_PCB_VER:
+ val = ((val & 0x60) >> 5) + 1;
+ break;
+ default:
+ break;
+ }
+
+ return val;
+}
+#endif
+
int checkboard(void)
{
struct cpu_type *cpu;
+ struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
+ u8 val;
cpu = gd->arch.cpu;
- printf("Board: %sRDB\n", cpu->name);
+#if defined(CONFIG_P1010RDB_PA)
+ printf("Board: %sRDB-PA, ", cpu->name);
+#elif defined(CONFIG_P1010RDB_PB)
+ printf("Board: %sRDB-PB, ", cpu->name);
+ i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
+ i2c_init(CONFIG_SYS_FSL_I2C_SPEED, CONFIG_SYS_FSL_I2C_SLAVE);
+ val = 0x0; /* no polarity inversion */
+ i2c_write(I2C_PCA9557_ADDR2, 2, 1, &val, 1);
+#endif
#ifdef CONFIG_SDCARD
/* switch to IFC to read info from CPLD */
config_board_mux(MUX_TYPE_IFC);
#endif
+#if defined(CONFIG_P1010RDB_PA)
+ val = (in_8(&cpld_data->pcba_ver) & 0xf);
+ printf("PCB: v%x.0\n", val);
+#elif defined(CONFIG_P1010RDB_PB)
+ val = in_8(&cpld_data->cpld_ver);
+ printf("CPLD: v%x.%x, ", val >> 4, val & 0xf);
+ printf("PCB: v%x.0, ", i2c_pca9557_read(I2C_READ_PCB_VER));
+ val = in_8(&cpld_data->rom_loc) & 0xf;
+ puts("Boot from: ");
+ switch (val) {
+ case 0xf:
+ config_board_mux(MUX_TYPE_CS0_NOR);
+ printf("NOR vBank%d\n", i2c_pca9557_read(I2C_READ_BANK));
+ break;
+ case 0xe:
+ puts("SDHC\n");
+ val = 0x60; /* set pca9557 pin input/output */
+ i2c_write(I2C_PCA9557_ADDR2, 3, 1, &val, 1);
+ break;
+ case 0x5:
+ config_board_mux(MUX_TYPE_IFC);
+ config_board_mux(MUX_TYPE_CS0_NAND);
+ puts("NAND\n");
+ break;
+ case 0x6:
+ config_board_mux(MUX_TYPE_IFC);
+ puts("SPI\n");
+ break;
+ default:
+ puts("unknown\n");
+ break;
+ }
+#endif
return 0;
}
int misc_init_r(void)
{
- struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "can")) {
MPC85xx_PMUXCR_CAN1_UART |
MPC85xx_PMUXCR_CAN2_TDM |
MPC85xx_PMUXCR_CAN2_UART);
- out_8(&cpld_data->tdm_can_sel, MUX_CPLD_CAN_UART);
+ config_board_mux(MUX_TYPE_CAN);
} else if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "tdm")) {
clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN2_UART |
MPC85xx_PMUXCR_CAN1_UART);
MPC85xx_PMUXCR_CAN1_TDM);
clrbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_GPIO);
setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_TDM);
- out_8(&cpld_data->tdm_can_sel, MUX_CPLD_TDM);
- out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_SLIC);
+ config_board_mux(MUX_TYPE_TDM);
} else {
/* defaultly spi_cs_sel to flash */
- out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_FLASH);
+ config_board_mux(MUX_TYPE_SPIFLASH);
}
if (hwconfig("esdhc"))
else if (hwconfig("ifc"))
config_board_mux(MUX_TYPE_IFC);
+#ifdef CONFIG_P1010RDB_PB
+ setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_GPIO01_DRVVBUS);
+#endif
return 0;
}
Active powerpc mpc85xx - freescale mpc8572ds MPC8572DS MPC8572DS -
Active powerpc mpc85xx - freescale mpc8572ds MPC8572DS_36BIT MPC8572DS:36BIT -
Active powerpc mpc85xx - freescale mpc8572ds MPC8572DS_NAND MPC8572DS:NAND -
-Active powerpc mpc85xx - freescale p1010rdb P1010RDB_36BIT_NAND P1010RDB:P1010RDB,36BIT,NAND -
-Active powerpc mpc85xx - freescale p1010rdb P1010RDB_36BIT_NAND_SECBOOT P1010RDB:P1010RDB,36BIT,NAND_SECBOOT,SECURE_BOOT -
-Active powerpc mpc85xx - freescale p1010rdb P1010RDB_36BIT_NOR P1010RDB:P1010RDB,36BIT -
-Active powerpc mpc85xx - freescale p1010rdb P1010RDB_36BIT_NOR_SECBOOT P1010RDB:P1010RDB,36BIT,SECURE_BOOT -
-Active powerpc mpc85xx - freescale p1010rdb P1010RDB_36BIT_SDCARD P1010RDB:P1010RDB,36BIT,SDCARD -
-Active powerpc mpc85xx - freescale p1010rdb P1010RDB_36BIT_SPIFLASH P1010RDB:P1010RDB,36BIT,SPIFLASH -
-Active powerpc mpc85xx - freescale p1010rdb P1010RDB_36BIT_SPIFLASH_SECBOOT P1010RDB:P1010RDB,36BIT,SPIFLASH,SECURE_BOOT -
-Active powerpc mpc85xx - freescale p1010rdb P1010RDB_NAND P1010RDB:P1010RDB,NAND -
-Active powerpc mpc85xx - freescale p1010rdb P1010RDB_NAND_SECBOOT P1010RDB:P1010RDB,NAND_SECBOOT,SECURE_BOOT -
-Active powerpc mpc85xx - freescale p1010rdb P1010RDB_NOR P1010RDB:P1010RDB -
-Active powerpc mpc85xx - freescale p1010rdb P1010RDB_NOR_SECBOOT P1010RDB:P1010RDB,SECURE_BOOT -
-Active powerpc mpc85xx - freescale p1010rdb P1010RDB_SDCARD P1010RDB:P1010RDB,SDCARD -
-Active powerpc mpc85xx - freescale p1010rdb P1010RDB_SPIFLASH P1010RDB:P1010RDB,SPIFLASH -
-Active powerpc mpc85xx - freescale p1010rdb P1010RDB_SPIFLASH_SECBOOT P1010RDB:P1010RDB,SPIFLASH,SECURE_BOOT -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_36BIT_NAND P1010RDB:P1010RDB_PA,36BIT,NAND -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_36BIT_NAND_SECBOOT P1010RDB:P1010RDB_PA,36BIT,NAND_SECBOOT,SECURE_BOOT -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_36BIT_NOR P1010RDB:P1010RDB_PA,36BIT -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_36BIT_NOR_SECBOOT P1010RDB:P1010RDB_PA,36BIT,SECURE_BOOT -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_36BIT_SDCARD P1010RDB:P1010RDB_PA,36BIT,SDCARD -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_36BIT_SPIFLASH P1010RDB:P1010RDB_PA,36BIT,SPIFLASH -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_36BIT_SPIFLASH_SECBOOT P1010RDB:P1010RDB_PA,36BIT,SPIFLASH,SECURE_BOOT -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_NAND P1010RDB:P1010RDB_PA,NAND -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_NAND_SECBOOT P1010RDB:P1010RDB_PA,NAND_SECBOOT,SECURE_BOOT -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_NOR P1010RDB:P1010RDB_PA -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_NOR_SECBOOT P1010RDB:P1010RDB_PA,SECURE_BOOT -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_SDCARD P1010RDB:P1010RDB_PA,SDCARD -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_SPIFLASH P1010RDB:P1010RDB_PA,SPIFLASH -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_SPIFLASH_SECBOOT P1010RDB:P1010RDB_PA,SPIFLASH,SECURE_BOOT -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_36BIT_NAND P1010RDB:P1010RDB_PB,36BIT,NAND -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_36BIT_NAND_SECBOOT P1010RDB:P1010RDB_PB,36BIT,NAND_SECBOOT,SECURE_BOOT -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_36BIT_NOR P1010RDB:P1010RDB_PB,36BIT -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_36BIT_NOR_SECBOOT P1010RDB:P1010RDB_PB,36BIT,SECURE_BOOT -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_36BIT_SDCARD P1010RDB:P1010RDB_PB,36BIT,SDCARD -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_36BIT_SPIFLASH P1010RDB:P1010RDB_PB,36BIT,SPIFLASH -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_36BIT_SPIFLASH_SECBOOT P1010RDB:P1010RDB_PB,36BIT,SPIFLASH,SECURE_BOOT -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_NAND P1010RDB:P1010RDB_PB,NAND -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_NAND_SECBOOT P1010RDB:P1010RDB_PB,NAND_SECBOOT,SECURE_BOOT -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_NOR P1010RDB:P1010RDB_PB -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_NOR_SECBOOT P1010RDB:P1010RDB_PB,SECURE_BOOT -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_SDCARD P1010RDB:P1010RDB_PB,SDCARD -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_SPIFLASH P1010RDB:P1010RDB_PB,SPIFLASH -
+Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PB_SPIFLASH_SECBOOT P1010RDB:P1010RDB_PB,SPIFLASH,SECURE_BOOT -
Active powerpc mpc85xx - freescale p1022ds P1022DS - Timur Tabi <timur@freescale.com>
Active powerpc mpc85xx - freescale p1022ds P1022DS_36BIT P1022DS:36BIT Timur Tabi <timur@freescale.com>
Active powerpc mpc85xx - freescale p1022ds P1022DS_36BIT_NAND P1022DS:36BIT,NAND Timur Tabi <timur@freescale.com>
#endif
/* controller 2, Slot 2, tgtid 2, Base address 9000 */
+#if defined(CONFIG_P1010RDB_PA)
#define CONFIG_SYS_PCIE2_NAME "PCIe Slot"
+#elif defined(CONFIG_P1010RDB_PB)
+#define CONFIG_SYS_PCIE2_NAME "mini PCIe Slot"
+#endif
#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000
#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000
#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000
#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000
-
#define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600
#define CONFIG_SYS_DDR_SR_CNTR 0x00000000
#define CONFIG_SYS_DDR_RCW_1 0x00000000
#define CONFIG_SYS_DDR_RCW_2 0x00000000
-#define CONFIG_SYS_DDR_CONTROL 0x470C0000 /* Type = DDR3 */
-#define CONFIG_SYS_DDR_CONTROL_2 0x04401010
+#define CONFIG_SYS_DDR_CONTROL 0xc70c0008 /* Type = DDR3 */
+#define CONFIG_SYS_DDR_CONTROL_2 0x24401000
#define CONFIG_SYS_DDR_TIMING_4 0x00000001
#define CONFIG_SYS_DDR_TIMING_5 0x03402400
-#define CONFIG_SYS_DDR_TIMING_3_800 0x00020000
-#define CONFIG_SYS_DDR_TIMING_0_800 0x00330004
-#define CONFIG_SYS_DDR_TIMING_1_800 0x6f6B4644
+#define CONFIG_SYS_DDR_TIMING_3_800 0x00030000
+#define CONFIG_SYS_DDR_TIMING_0_800 0x00110104
+#define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b8644
#define CONFIG_SYS_DDR_TIMING_2_800 0x0FA888CF
#define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000
-#define CONFIG_SYS_DDR_MODE_1_800 0x40461520
-#define CONFIG_SYS_DDR_MODE_2_800 0x8000c000
+#define CONFIG_SYS_DDR_MODE_1_800 0x00441420
+#define CONFIG_SYS_DDR_MODE_2_800 0x00000000
#define CONFIG_SYS_DDR_INTERVAL_800 0x0C300100
-#define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8655A608
+#define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608
/* settings for DDR3 at 667MT/s */
#define CONFIG_SYS_DDR_TIMING_3_667 0x00010000
| CSPR_MSEL_NAND \
| CSPR_V)
#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
+
+#if defined(CONFIG_P1010RDB_PA)
#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
| CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
| CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
| CSOR_NAND_PGS_512 /* Page Size = 512b */ \
| CSOR_NAND_SPRZ_16 /* Spare size = 16 */ \
| CSOR_NAND_PB(32)) /* 32 Pages Per Block */
+#define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024)
+
+#elif defined(CONFIG_P1010RDB_PB)
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
+ | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
+ | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
+ | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \
+ | CSOR_NAND_PGS_4K /* Page Size = 4K */ \
+ | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \
+ | CSOR_NAND_PB(128)) /*Pages Per Block = 128 */
+#define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024)
+#endif
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_MTD_NAND_VERIFY_WRITE
#define CONFIG_CMD_NAND
-#define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024)
+#if defined(CONFIG_P1010RDB_PA)
/* NAND Flash Timing Params */
#define CONFIG_SYS_NAND_FTIM0 FTIM0_NAND_TCCST(0x01) | \
FTIM0_NAND_TWP(0x0C) | \
FTIM2_NAND_TWHRE(0x0f)
#define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04)
+#elif defined(CONFIG_P1010RDB_PB)
+/* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */
+/* ONFI NAND Flash mode0 Timing Params */
+#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07)| \
+ FTIM0_NAND_TWP(0x18) | \
+ FTIM0_NAND_TWCHT(0x07) | \
+ FTIM0_NAND_TWH(0x0a))
+#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32)| \
+ FTIM1_NAND_TWBE(0x39) | \
+ FTIM1_NAND_TRR(0x0e) | \
+ FTIM1_NAND_TRP(0x18))
+#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \
+ FTIM2_NAND_TREH(0x0a) | \
+ FTIM2_NAND_TWHRE(0x1e))
+#define CONFIG_SYS_NAND_FTIM3 0x0
+#endif
+
#define CONFIG_SYS_NAND_DDR_LAW 11
/* Set up IFC registers for boot location NOR/NAND */
#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
#define I2C_PCA9557_ADDR1 0x18
+#define I2C_PCA9557_ADDR2 0x19
#define I2C_PCA9557_BUS_NUM 0
/* I2C EEPROM */
-#undef CONFIG_ID_EEPROM
+#if defined(CONFIG_P1010RDB_PB)
+#define CONFIG_ID_EEPROM
+#ifdef CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#endif
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
+#define CONFIG_SYS_EEPROM_BUS_NUM 0
+#define MAX_NUM_PORTS 9 /* for 128Bytes EEPROM */
+#endif
/* enable read and write access to EEPROM */
#define CONFIG_CMD_EEPROM
#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_ENV_SIZE 0x2000
#elif defined(CONFIG_NAND)
#define CONFIG_ENV_IS_IN_NAND
+#if defined(CONFIG_P1010RDB_PA)
#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) /* 3*16=48K for env */
+#elif defined(CONFIG_P1010RDB_PB)
+#define CONFIG_ENV_SIZE (16 * 1024)
+#define CONFIG_ENV_RANGE (32 * CONFIG_ENV_SIZE) /* new block size 512K */
+#endif
#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
-#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE)
#elif defined(CONFIG_SYS_RAMBOOT)
#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
#define CONFIG_HAS_ETH2
#endif
-#define CONFIG_HOSTNAME P1010RDB
#define CONFIG_ROOTPATH "/opt/nfsroot"
#define CONFIG_BOOTFILE "uImage"
#define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */
"ext2load usb 0:4 $loadaddr $bootfile;" \
"ext2load usb 0:4 $fdtaddr $fdtfile;" \
"ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \
+ CONFIG_BOOTMODE
+
+#if defined(CONFIG_P1010RDB_PA)
+#define CONFIG_BOOTMODE \
+ "boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
+ "mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \
+ "boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
+ "mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \
+ "boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \
+ "mw.b ffb00011 0; mw.b ffb00017 1; reset\0"
+
+#elif defined(CONFIG_P1010RDB_PB)
+#define CONFIG_BOOTMODE \
+ "boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
+ "i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \
+ "boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
+ "i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \
+ "boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \
+ "i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \
+ "boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \
+ "i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \
+ "boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \
+ "i2c mw 19 1 4; i2c mw 19 3 f3; reset\0"
+#endif
#define CONFIG_RAMBOOTCOMMAND \
"setenv bootargs root=/dev/ram rw " \
projects / project / bcm63xx / u-boot.git / commitdiff