#include <linux/netdevice.h>
#include <net/dsa.h>
#include <linux/bitmap.h>
+#include <net/flow_offload.h>
#include "bcm_sf2.h"
#include "bcm_sf2_regs.h"
}
static void bcm_sf2_cfp_slice_ipv4(struct bcm_sf2_priv *priv,
- struct ethtool_tcpip4_spec *v4_spec,
+ struct flow_dissector_key_ipv4_addrs *addrs,
+ struct flow_dissector_key_ports *ports,
unsigned int slice_num,
bool mask)
{
* UDF_n_A6 [23:8]
* UDF_n_A5 [7:0]
*/
- reg = be16_to_cpu(v4_spec->pdst) >> 8;
+ reg = be16_to_cpu(ports->dst) >> 8;
if (mask)
offset = CORE_CFP_MASK_PORT(3);
else
* UDF_n_A4 [23:8]
* UDF_n_A3 [7:0]
*/
- reg = (be16_to_cpu(v4_spec->pdst) & 0xff) << 24 |
- (u32)be16_to_cpu(v4_spec->psrc) << 8 |
- (be32_to_cpu(v4_spec->ip4dst) & 0x0000ff00) >> 8;
+ reg = (be16_to_cpu(ports->dst) & 0xff) << 24 |
+ (u32)be16_to_cpu(ports->src) << 8 |
+ (be32_to_cpu(addrs->dst) & 0x0000ff00) >> 8;
if (mask)
offset = CORE_CFP_MASK_PORT(2);
else
* UDF_n_A2 [23:8]
* UDF_n_A1 [7:0]
*/
- reg = (u32)(be32_to_cpu(v4_spec->ip4dst) & 0xff) << 24 |
- (u32)(be32_to_cpu(v4_spec->ip4dst) >> 16) << 8 |
- (be32_to_cpu(v4_spec->ip4src) & 0x0000ff00) >> 8;
+ reg = (u32)(be32_to_cpu(addrs->dst) & 0xff) << 24 |
+ (u32)(be32_to_cpu(addrs->dst) >> 16) << 8 |
+ (be32_to_cpu(addrs->src) & 0x0000ff00) >> 8;
if (mask)
offset = CORE_CFP_MASK_PORT(1);
else
* Slice ID [3:2]
* Slice valid [1:0]
*/
- reg = (u32)(be32_to_cpu(v4_spec->ip4src) & 0xff) << 24 |
- (u32)(be32_to_cpu(v4_spec->ip4src) >> 16) << 8 |
+ reg = (u32)(be32_to_cpu(addrs->src) & 0xff) << 24 |
+ (u32)(be32_to_cpu(addrs->src) >> 16) << 8 |
SLICE_NUM(slice_num) | SLICE_VALID;
if (mask)
offset = CORE_CFP_MASK_PORT(0);
unsigned int queue_num,
struct ethtool_rx_flow_spec *fs)
{
- struct ethtool_tcpip4_spec *v4_spec, *v4_m_spec;
+ struct ethtool_rx_flow_spec_input input = {};
const struct cfp_udf_layout *layout;
unsigned int slice_num, rule_index;
+ struct ethtool_rx_flow_rule *flow;
+ struct flow_match_ipv4_addrs ipv4;
+ struct flow_match_ports ports;
+ struct flow_match_ip ip;
u8 ip_proto, ip_frag;
u8 num_udf;
u32 reg;
switch (fs->flow_type & ~FLOW_EXT) {
case TCP_V4_FLOW:
ip_proto = IPPROTO_TCP;
- v4_spec = &fs->h_u.tcp_ip4_spec;
- v4_m_spec = &fs->m_u.tcp_ip4_spec;
break;
case UDP_V4_FLOW:
ip_proto = IPPROTO_UDP;
- v4_spec = &fs->h_u.udp_ip4_spec;
- v4_m_spec = &fs->m_u.udp_ip4_spec;
break;
default:
return -EINVAL;
if (rule_index > bcm_sf2_cfp_rule_size(priv))
return -ENOSPC;
+ input.fs = fs;
+ flow = ethtool_rx_flow_rule_create(&input);
+ if (IS_ERR(flow))
+ return PTR_ERR(flow);
+
+ flow_rule_match_ipv4_addrs(flow->rule, &ipv4);
+ flow_rule_match_ports(flow->rule, &ports);
+ flow_rule_match_ip(flow->rule, &ip);
+
layout = &udf_tcpip4_layout;
/* We only use one UDF slice for now */
slice_num = bcm_sf2_get_slice_number(layout, 0);
- if (slice_num == UDF_NUM_SLICES)
- return -EINVAL;
+ if (slice_num == UDF_NUM_SLICES) {
+ ret = -EINVAL;
+ goto out_err_flow_rule;
+ }
num_udf = bcm_sf2_get_num_udf_slices(layout->udfs[slice_num].slices);
* Reserved [1]
* UDF_Valid[8] [0]
*/
- core_writel(priv, v4_spec->tos << IPTOS_SHIFT |
+ core_writel(priv, ip.key->tos << IPTOS_SHIFT |
ip_proto << IPPROTO_SHIFT | ip_frag << IP_FRAG_SHIFT |
udf_upper_bits(num_udf),
CORE_CFP_DATA_PORT(6));
core_writel(priv, udf_lower_bits(num_udf) << 24, CORE_CFP_MASK_PORT(5));
/* Program the match and the mask */
- bcm_sf2_cfp_slice_ipv4(priv, v4_spec, slice_num, false);
- bcm_sf2_cfp_slice_ipv4(priv, v4_m_spec, SLICE_NUM_MASK, true);
+ bcm_sf2_cfp_slice_ipv4(priv, ipv4.key, ports.key, slice_num, false);
+ bcm_sf2_cfp_slice_ipv4(priv, ipv4.mask, ports.mask, SLICE_NUM_MASK, true);
/* Insert into TCAM now */
bcm_sf2_cfp_rule_addr_set(priv, rule_index);
ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | TCAM_SEL);
if (ret) {
pr_err("TCAM entry at addr %d failed\n", rule_index);
- return ret;
+ goto out_err_flow_rule;
}
/* Insert into Action and policer RAMs now */
ret = bcm_sf2_cfp_act_pol_set(priv, rule_index, port_num,
queue_num, true);
if (ret)
- return ret;
+ goto out_err_flow_rule;
/* Turn on CFP for this rule now */
reg = core_readl(priv, CORE_CFP_CTL_REG);
fs->location = rule_index;
return 0;
+
+out_err_flow_rule:
+ ethtool_rx_flow_rule_destroy(flow);
+ return ret;
}
static void bcm_sf2_cfp_slice_ipv6(struct bcm_sf2_priv *priv,
struct ethtool_rx_flow_spec *fs)
{
struct ethtool_tcpip6_spec *v6_spec, *v6_m_spec;
+ struct ethtool_rx_flow_spec_input input = {};
unsigned int slice_num, rule_index[2];
const struct cfp_udf_layout *layout;
+ struct ethtool_rx_flow_rule *flow;
+ struct flow_match_ipv6_addrs ipv6;
+ struct flow_match_ports ports;
u8 ip_proto, ip_frag;
int ret = 0;
u8 num_udf;
goto out_err;
}
+ input.fs = fs;
+ flow = ethtool_rx_flow_rule_create(&input);
+ if (IS_ERR(flow)) {
+ ret = PTR_ERR(flow);
+ goto out_err;
+ }
+ flow_rule_match_ipv6_addrs(flow->rule, &ipv6);
+ flow_rule_match_ports(flow->rule, &ports);
+
/* Apply the UDF layout for this filter */
bcm_sf2_cfp_udf_set(priv, layout, slice_num);
core_writel(priv, udf_lower_bits(num_udf) << 24, CORE_CFP_MASK_PORT(5));
/* Slice the IPv6 source address and port */
- bcm_sf2_cfp_slice_ipv6(priv, v6_spec->ip6src, v6_spec->psrc,
- slice_num, false);
- bcm_sf2_cfp_slice_ipv6(priv, v6_m_spec->ip6src, v6_m_spec->psrc,
- SLICE_NUM_MASK, true);
+ bcm_sf2_cfp_slice_ipv6(priv, ipv6.key->src.in6_u.u6_addr32,
+ ports.key->src, slice_num, false);
+ bcm_sf2_cfp_slice_ipv6(priv, ipv6.mask->src.in6_u.u6_addr32,
+ ports.mask->src, SLICE_NUM_MASK, true);
/* Insert into TCAM now because we need to insert a second rule */
bcm_sf2_cfp_rule_addr_set(priv, rule_index[0]);
ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | TCAM_SEL);
if (ret) {
pr_err("TCAM entry at addr %d failed\n", rule_index[0]);
- goto out_err;
+ goto out_err_flow_rule;
}
/* Insert into Action and policer RAMs now */
ret = bcm_sf2_cfp_act_pol_set(priv, rule_index[0], port_num,
queue_num, false);
if (ret)
- goto out_err;
+ goto out_err_flow_rule;
/* Now deal with the second slice to chain this rule */
slice_num = bcm_sf2_get_slice_number(layout, slice_num + 1);
if (slice_num == UDF_NUM_SLICES) {
ret = -EINVAL;
- goto out_err;
+ goto out_err_flow_rule;
}
num_udf = bcm_sf2_get_num_udf_slices(layout->udfs[slice_num].slices);
/* Mask all */
core_writel(priv, 0, CORE_CFP_MASK_PORT(5));
- bcm_sf2_cfp_slice_ipv6(priv, v6_spec->ip6dst, v6_spec->pdst, slice_num,
- false);
- bcm_sf2_cfp_slice_ipv6(priv, v6_m_spec->ip6dst, v6_m_spec->pdst,
- SLICE_NUM_MASK, true);
+ bcm_sf2_cfp_slice_ipv6(priv, ipv6.key->dst.in6_u.u6_addr32,
+ ports.key->dst, slice_num, false);
+ bcm_sf2_cfp_slice_ipv6(priv, ipv6.mask->dst.in6_u.u6_addr32,
+ ports.key->dst, SLICE_NUM_MASK, true);
/* Insert into TCAM now */
bcm_sf2_cfp_rule_addr_set(priv, rule_index[1]);
ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | TCAM_SEL);
if (ret) {
pr_err("TCAM entry at addr %d failed\n", rule_index[1]);
- goto out_err;
+ goto out_err_flow_rule;
}
/* Insert into Action and policer RAMs now, set chain ID to
ret = bcm_sf2_cfp_act_pol_set(priv, rule_index[1], port_num,
queue_num, true);
if (ret)
- goto out_err;
+ goto out_err_flow_rule;
/* Turn on CFP for this rule now */
reg = core_readl(priv, CORE_CFP_CTL_REG);
return ret;
+out_err_flow_rule:
+ ethtool_rx_flow_rule_destroy(flow);
out_err:
clear_bit(rule_index[1], priv->cfp.used);
return ret;