--- /dev/null
+/*
+ * This is an OpenSSL-compatible implementation of the RSA Data Security, Inc.
+ * MD5 Message-Digest Algorithm (RFC 1321).
+ *
+ * Homepage:
+ * http://openwall.info/wiki/people/solar/software/public-domain-source-code/md5
+ *
+ * Author:
+ * Alexander Peslyak, better known as Solar Designer <solar at openwall.com>
+ *
+ * This software was written by Alexander Peslyak in 2001. No copyright is
+ * claimed, and the software is hereby placed in the public domain.
+ * In case this attempt to disclaim copyright and place the software in the
+ * public domain is deemed null and void, then the software is
+ * Copyright (c) 2001 Alexander Peslyak and it is hereby released to the
+ * general public under the following terms:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted.
+ *
+ * There's ABSOLUTELY NO WARRANTY, express or implied.
+ *
+ * (This is a heavily cut-down "BSD license".)
+ *
+ * This differs from Colin Plumb's older public domain implementation in that
+ * no exactly 32-bit integer data type is required (any 32-bit or wider
+ * unsigned integer data type will do), there's no compile-time endianness
+ * configuration, and the function prototypes match OpenSSL's. No code from
+ * Colin Plumb's implementation has been reused; this comment merely compares
+ * the properties of the two independent implementations.
+ *
+ * The primary goals of this implementation are portability and ease of use.
+ * It is meant to be fast, but not as fast as possible. Some known
+ * optimizations are not included to reduce source code size and avoid
+ * compile-time configuration.
+ */
+
+#ifndef HAVE_OPENSSL
+
+#include <string.h>
+
+#include "md5.h"
+
+/*
+ * The basic MD5 functions.
+ *
+ * F and G are optimized compared to their RFC 1321 definitions for
+ * architectures that lack an AND-NOT instruction, just like in Colin Plumb's
+ * implementation.
+ */
+#define F(x, y, z) ((z) ^ ((x) & ((y) ^ (z))))
+#define G(x, y, z) ((y) ^ ((z) & ((x) ^ (y))))
+#define H(x, y, z) (((x) ^ (y)) ^ (z))
+#define H2(x, y, z) ((x) ^ ((y) ^ (z)))
+#define I(x, y, z) ((y) ^ ((x) | ~(z)))
+
+/*
+ * The MD5 transformation for all four rounds.
+ */
+#define STEP(f, a, b, c, d, x, t, s) \
+ (a) += f((b), (c), (d)) + (x) + (t); \
+ (a) = (((a) << (s)) | (((a) & 0xffffffff) >> (32 - (s)))); \
+ (a) += (b);
+
+/*
+ * SET reads 4 input bytes in little-endian byte order and stores them
+ * in a properly aligned word in host byte order.
+ *
+ * The check for little-endian architectures that tolerate unaligned
+ * memory accesses is just an optimization. Nothing will break if it
+ * doesn't work.
+ */
+#if defined(__i386__) || defined(__x86_64__) || defined(__vax__)
+#define SET(n) \
+ (*(MD5_u32plus *)&ptr[(n) * 4])
+#define GET(n) \
+ SET(n)
+#else
+#define SET(n) \
+ (ctx->block[(n)] = \
+ (MD5_u32plus)ptr[(n) * 4] | \
+ ((MD5_u32plus)ptr[(n) * 4 + 1] << 8) | \
+ ((MD5_u32plus)ptr[(n) * 4 + 2] << 16) | \
+ ((MD5_u32plus)ptr[(n) * 4 + 3] << 24))
+#define GET(n) \
+ (ctx->block[(n)])
+#endif
+
+/*
+ * This processes one or more 64-byte data blocks, but does NOT update
+ * the bit counters. There are no alignment requirements.
+ */
+static const void *body(MD5_CTX *ctx, const void *data, unsigned long size)
+{
+ const unsigned char *ptr;
+ MD5_u32plus a, b, c, d;
+ MD5_u32plus saved_a, saved_b, saved_c, saved_d;
+
+ ptr = (const unsigned char *)data;
+
+ a = ctx->a;
+ b = ctx->b;
+ c = ctx->c;
+ d = ctx->d;
+
+ do {
+ saved_a = a;
+ saved_b = b;
+ saved_c = c;
+ saved_d = d;
+
+/* Round 1 */
+ STEP(F, a, b, c, d, SET(0), 0xd76aa478, 7)
+ STEP(F, d, a, b, c, SET(1), 0xe8c7b756, 12)
+ STEP(F, c, d, a, b, SET(2), 0x242070db, 17)
+ STEP(F, b, c, d, a, SET(3), 0xc1bdceee, 22)
+ STEP(F, a, b, c, d, SET(4), 0xf57c0faf, 7)
+ STEP(F, d, a, b, c, SET(5), 0x4787c62a, 12)
+ STEP(F, c, d, a, b, SET(6), 0xa8304613, 17)
+ STEP(F, b, c, d, a, SET(7), 0xfd469501, 22)
+ STEP(F, a, b, c, d, SET(8), 0x698098d8, 7)
+ STEP(F, d, a, b, c, SET(9), 0x8b44f7af, 12)
+ STEP(F, c, d, a, b, SET(10), 0xffff5bb1, 17)
+ STEP(F, b, c, d, a, SET(11), 0x895cd7be, 22)
+ STEP(F, a, b, c, d, SET(12), 0x6b901122, 7)
+ STEP(F, d, a, b, c, SET(13), 0xfd987193, 12)
+ STEP(F, c, d, a, b, SET(14), 0xa679438e, 17)
+ STEP(F, b, c, d, a, SET(15), 0x49b40821, 22)
+
+/* Round 2 */
+ STEP(G, a, b, c, d, GET(1), 0xf61e2562, 5)
+ STEP(G, d, a, b, c, GET(6), 0xc040b340, 9)
+ STEP(G, c, d, a, b, GET(11), 0x265e5a51, 14)
+ STEP(G, b, c, d, a, GET(0), 0xe9b6c7aa, 20)
+ STEP(G, a, b, c, d, GET(5), 0xd62f105d, 5)
+ STEP(G, d, a, b, c, GET(10), 0x02441453, 9)
+ STEP(G, c, d, a, b, GET(15), 0xd8a1e681, 14)
+ STEP(G, b, c, d, a, GET(4), 0xe7d3fbc8, 20)
+ STEP(G, a, b, c, d, GET(9), 0x21e1cde6, 5)
+ STEP(G, d, a, b, c, GET(14), 0xc33707d6, 9)
+ STEP(G, c, d, a, b, GET(3), 0xf4d50d87, 14)
+ STEP(G, b, c, d, a, GET(8), 0x455a14ed, 20)
+ STEP(G, a, b, c, d, GET(13), 0xa9e3e905, 5)
+ STEP(G, d, a, b, c, GET(2), 0xfcefa3f8, 9)
+ STEP(G, c, d, a, b, GET(7), 0x676f02d9, 14)
+ STEP(G, b, c, d, a, GET(12), 0x8d2a4c8a, 20)
+
+/* Round 3 */
+ STEP(H, a, b, c, d, GET(5), 0xfffa3942, 4)
+ STEP(H2, d, a, b, c, GET(8), 0x8771f681, 11)
+ STEP(H, c, d, a, b, GET(11), 0x6d9d6122, 16)
+ STEP(H2, b, c, d, a, GET(14), 0xfde5380c, 23)
+ STEP(H, a, b, c, d, GET(1), 0xa4beea44, 4)
+ STEP(H2, d, a, b, c, GET(4), 0x4bdecfa9, 11)
+ STEP(H, c, d, a, b, GET(7), 0xf6bb4b60, 16)
+ STEP(H2, b, c, d, a, GET(10), 0xbebfbc70, 23)
+ STEP(H, a, b, c, d, GET(13), 0x289b7ec6, 4)
+ STEP(H2, d, a, b, c, GET(0), 0xeaa127fa, 11)
+ STEP(H, c, d, a, b, GET(3), 0xd4ef3085, 16)
+ STEP(H2, b, c, d, a, GET(6), 0x04881d05, 23)
+ STEP(H, a, b, c, d, GET(9), 0xd9d4d039, 4)
+ STEP(H2, d, a, b, c, GET(12), 0xe6db99e5, 11)
+ STEP(H, c, d, a, b, GET(15), 0x1fa27cf8, 16)
+ STEP(H2, b, c, d, a, GET(2), 0xc4ac5665, 23)
+
+/* Round 4 */
+ STEP(I, a, b, c, d, GET(0), 0xf4292244, 6)
+ STEP(I, d, a, b, c, GET(7), 0x432aff97, 10)
+ STEP(I, c, d, a, b, GET(14), 0xab9423a7, 15)
+ STEP(I, b, c, d, a, GET(5), 0xfc93a039, 21)
+ STEP(I, a, b, c, d, GET(12), 0x655b59c3, 6)
+ STEP(I, d, a, b, c, GET(3), 0x8f0ccc92, 10)
+ STEP(I, c, d, a, b, GET(10), 0xffeff47d, 15)
+ STEP(I, b, c, d, a, GET(1), 0x85845dd1, 21)
+ STEP(I, a, b, c, d, GET(8), 0x6fa87e4f, 6)
+ STEP(I, d, a, b, c, GET(15), 0xfe2ce6e0, 10)
+ STEP(I, c, d, a, b, GET(6), 0xa3014314, 15)
+ STEP(I, b, c, d, a, GET(13), 0x4e0811a1, 21)
+ STEP(I, a, b, c, d, GET(4), 0xf7537e82, 6)
+ STEP(I, d, a, b, c, GET(11), 0xbd3af235, 10)
+ STEP(I, c, d, a, b, GET(2), 0x2ad7d2bb, 15)
+ STEP(I, b, c, d, a, GET(9), 0xeb86d391, 21)
+
+ a += saved_a;
+ b += saved_b;
+ c += saved_c;
+ d += saved_d;
+
+ ptr += 64;
+ } while (size -= 64);
+
+ ctx->a = a;
+ ctx->b = b;
+ ctx->c = c;
+ ctx->d = d;
+
+ return ptr;
+}
+
+void MD5_Init(MD5_CTX *ctx)
+{
+ ctx->a = 0x67452301;
+ ctx->b = 0xefcdab89;
+ ctx->c = 0x98badcfe;
+ ctx->d = 0x10325476;
+
+ ctx->lo = 0;
+ ctx->hi = 0;
+}
+
+void MD5_Update(MD5_CTX *ctx, const void *data, unsigned long size)
+{
+ MD5_u32plus saved_lo;
+ unsigned long used, available;
+
+ saved_lo = ctx->lo;
+ if ((ctx->lo = (saved_lo + size) & 0x1fffffff) < saved_lo)
+ ctx->hi++;
+ ctx->hi += size >> 29;
+
+ used = saved_lo & 0x3f;
+
+ if (used) {
+ available = 64 - used;
+
+ if (size < available) {
+ memcpy(&ctx->buffer[used], data, size);
+ return;
+ }
+
+ memcpy(&ctx->buffer[used], data, available);
+ data = (const unsigned char *)data + available;
+ size -= available;
+ body(ctx, ctx->buffer, 64);
+ }
+
+ if (size >= 64) {
+ data = body(ctx, data, size & ~(unsigned long)0x3f);
+ size &= 0x3f;
+ }
+
+ memcpy(ctx->buffer, data, size);
+}
+
+void MD5_Final(unsigned char *result, MD5_CTX *ctx)
+{
+ unsigned long used, available;
+
+ used = ctx->lo & 0x3f;
+
+ ctx->buffer[used++] = 0x80;
+
+ available = 64 - used;
+
+ if (available < 8) {
+ memset(&ctx->buffer[used], 0, available);
+ body(ctx, ctx->buffer, 64);
+ used = 0;
+ available = 64;
+ }
+
+ memset(&ctx->buffer[used], 0, available - 8);
+
+ ctx->lo <<= 3;
+ ctx->buffer[56] = ctx->lo;
+ ctx->buffer[57] = ctx->lo >> 8;
+ ctx->buffer[58] = ctx->lo >> 16;
+ ctx->buffer[59] = ctx->lo >> 24;
+ ctx->buffer[60] = ctx->hi;
+ ctx->buffer[61] = ctx->hi >> 8;
+ ctx->buffer[62] = ctx->hi >> 16;
+ ctx->buffer[63] = ctx->hi >> 24;
+
+ body(ctx, ctx->buffer, 64);
+
+ result[0] = ctx->a;
+ result[1] = ctx->a >> 8;
+ result[2] = ctx->a >> 16;
+ result[3] = ctx->a >> 24;
+ result[4] = ctx->b;
+ result[5] = ctx->b >> 8;
+ result[6] = ctx->b >> 16;
+ result[7] = ctx->b >> 24;
+ result[8] = ctx->c;
+ result[9] = ctx->c >> 8;
+ result[10] = ctx->c >> 16;
+ result[11] = ctx->c >> 24;
+ result[12] = ctx->d;
+ result[13] = ctx->d >> 8;
+ result[14] = ctx->d >> 16;
+ result[15] = ctx->d >> 24;
+
+ memset(ctx, 0, sizeof(*ctx));
+}
+
+#endif
#include <string.h>
#include <unistd.h>
+#include "md5.h"
+
#if !defined(__BYTE_ORDER)
#error "Unknown byte order"
#endif
return err;
}
+/**************************************************
+ * Create
+ **************************************************/
+
+static ssize_t oseama_entity_append_file(FILE *seama, const char *in_path) {
+ FILE *in;
+ size_t bytes;
+ ssize_t length = 0;
+ uint8_t buf[128];
+
+ in = fopen(in_path, "r");
+ if (!in) {
+ fprintf(stderr, "Couldn't open %s\n", in_path);
+ return -EACCES;
+ }
+
+ while ((bytes = fread(buf, 1, sizeof(buf), in)) > 0) {
+ if (fwrite(buf, 1, bytes, seama) != bytes) {
+ fprintf(stderr, "Couldn't write %zu B to %s\n", bytes, seama_path);
+ length = -EIO;
+ break;
+ }
+ length += bytes;
+ }
+
+ fclose(in);
+
+ return length;
+}
+
+static ssize_t oseama_entity_append_zeros(FILE *seama, size_t length) {
+ uint8_t *buf;
+
+ buf = malloc(length);
+ if (!buf)
+ return -ENOMEM;
+ memset(buf, 0, length);
+
+ if (fwrite(buf, 1, length, seama) != length) {
+ fprintf(stderr, "Couldn't write %zu B to %s\n", length, seama_path);
+ return -EIO;
+ }
+
+ return length;
+}
+
+static ssize_t oseama_entity_align(FILE *seama, size_t curr_offset, size_t alignment) {
+ if (curr_offset & (alignment - 1)) {
+ size_t length = alignment - (curr_offset % alignment);
+
+ return oseama_entity_append_zeros(seama, length);
+ }
+
+ return 0;
+}
+
+static int oseama_entity_write_hdr(FILE *seama, size_t metasize, size_t imagesize) {
+ struct seama_entity_header hdr = {};
+ uint8_t buf[128];
+ size_t length = imagesize;
+ size_t bytes;
+ MD5_CTX ctx;
+
+ fseek(seama, sizeof(hdr) + metasize, SEEK_SET);
+ MD5_Init(&ctx);
+ while ((bytes = fread(buf, 1, oseama_min(sizeof(buf), length), seama)) > 0) {
+ MD5_Update(&ctx, buf, bytes);
+ length -= bytes;
+ }
+ MD5_Final(hdr.md5, &ctx);
+
+ hdr.magic = cpu_to_be32(SEAMA_MAGIC);
+ hdr.metasize = cpu_to_be16(metasize);
+ hdr.imagesize = cpu_to_be32(imagesize);
+
+ fseek(seama, 0, SEEK_SET);
+ bytes = fwrite(&hdr, 1, sizeof(hdr), seama);
+ if (bytes != sizeof(hdr)) {
+ fprintf(stderr, "Couldn't write Seama entity header to %s\n", seama_path);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int oseama_entity(int argc, char **argv) {
+ FILE *seama;
+ ssize_t sbytes;
+ size_t curr_offset = sizeof(struct seama_entity_header);
+ size_t metasize = 0, imagesize = 0;
+ int c;
+ int err = 0;
+
+ if (argc < 3) {
+ fprintf(stderr, "No Seama file passed\n");
+ err = -EINVAL;
+ goto out;
+ }
+ seama_path = argv[2];
+
+ seama = fopen(seama_path, "w+");
+ if (!seama) {
+ fprintf(stderr, "Couldn't open %s\n", seama_path);
+ err = -EACCES;
+ goto out;
+ }
+ fseek(seama, curr_offset, SEEK_SET);
+
+ optind = 3;
+ while ((c = getopt(argc, argv, "m:f:b:")) != -1) {
+ switch (c) {
+ case 'm':
+ sbytes = fwrite(optarg, 1, strlen(optarg) + 1, seama);
+ if (sbytes < 0) {
+ fprintf(stderr, "Failed to write meta %s\n", optarg);
+ } else {
+ curr_offset += sbytes;
+ metasize += sbytes;
+ }
+
+ sbytes = oseama_entity_align(seama, curr_offset, 4);
+ if (sbytes < 0) {
+ fprintf(stderr, "Failed to append zeros\n");
+ } else {
+ curr_offset += sbytes;
+ metasize += sbytes;
+ }
+
+ break;
+ case 'f':
+ case 'b':
+ break;
+ }
+ }
+
+ optind = 3;
+ while ((c = getopt(argc, argv, "m:f:b:")) != -1) {
+ switch (c) {
+ case 'm':
+ break;
+ case 'f':
+ sbytes = oseama_entity_append_file(seama, optarg);
+ if (sbytes < 0) {
+ fprintf(stderr, "Failed to append file %s\n", optarg);
+ } else {
+ curr_offset += sbytes;
+ imagesize += sbytes;
+ }
+ break;
+ case 'b':
+ sbytes = strtol(optarg, NULL, 0) - curr_offset;
+ if (sbytes < 0) {
+ fprintf(stderr, "Current Seama entity length is 0x%zx, can't pad it with zeros to 0x%lx\n", curr_offset, strtol(optarg, NULL, 0));
+ } else {
+ sbytes = oseama_entity_append_zeros(seama, sbytes);
+ if (sbytes < 0) {
+ fprintf(stderr, "Failed to append zeros\n");
+ } else {
+ curr_offset += sbytes;
+ imagesize += sbytes;
+ }
+ }
+ break;
+ }
+ if (err)
+ break;
+ }
+
+ oseama_entity_write_hdr(seama, metasize, imagesize);
+
+ fclose(seama);
+out:
+ return err;
+}
+
/**************************************************
* Start
**************************************************/
printf("Info about Seama seal (container):\n");
printf("\toseama info <file> [options]\n");
printf("\t-e\t\t\t\tprint info about specified entity only\n");
+ printf("\n");
+ printf("Create Seama entity:\n");
+ printf("\toseama entity <file> [options]\n");
+ printf("\t-m meta\t\t\t\tmeta into to put in header\n");
+ printf("\t-f file\t\t\t\tappend content from file\n");
+ printf("\t-b offset\t\t\tappend zeros till reaching absolute offset\n");
}
int main(int argc, char **argv) {
if (argc > 1) {
if (!strcmp(argv[1], "info"))
return oseama_info(argc, argv);
+ else if (!strcmp(argv[1], "entity"))
+ return oseama_entity(argc, argv);
}
usage();
projects / openwrt / staging / hauke.git / commitdiff