The nand subtarget is not working yet.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33983
--- /dev/null
+CONFIG_AG71XX=y
+CONFIG_AG71XX_AR8216_SUPPORT=y
+# CONFIG_AG71XX_DEBUG is not set
+# CONFIG_AG71XX_DEBUG_FS is not set
+CONFIG_AR8216_PHY=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ATH79=y
+CONFIG_ATH79_DEV_AP9X_PCI=y
+CONFIG_ATH79_DEV_DSA=y
+CONFIG_ATH79_DEV_ETH=y
+CONFIG_ATH79_DEV_GPIO_BUTTONS=y
+CONFIG_ATH79_DEV_LEDS_GPIO=y
+CONFIG_ATH79_DEV_M25P80=y
+CONFIG_ATH79_DEV_NFC=y
+CONFIG_ATH79_DEV_SPI=y
+CONFIG_ATH79_DEV_USB=y
+CONFIG_ATH79_DEV_WMAC=y
+CONFIG_ATH79_MACH_ALFA_AP96=y
+CONFIG_ATH79_MACH_ALFA_NX=y
+CONFIG_ATH79_MACH_ALL0258N=y
+CONFIG_ATH79_MACH_ALL0315N=y
+CONFIG_ATH79_MACH_AP113=y
+CONFIG_ATH79_MACH_AP121=y
+CONFIG_ATH79_MACH_AP136=y
+CONFIG_ATH79_MACH_AP81=y
+CONFIG_ATH79_MACH_AP83=y
+CONFIG_ATH79_MACH_AP96=y
+CONFIG_ATH79_MACH_AW_NR580=y
+CONFIG_ATH79_MACH_CAP4200AG=y
+CONFIG_ATH79_MACH_DB120=y
+CONFIG_ATH79_MACH_DIR_600_A1=y
+CONFIG_ATH79_MACH_DIR_615_C1=y
+CONFIG_ATH79_MACH_DIR_825_B1=y
+CONFIG_ATH79_MACH_EAP7660D=y
+CONFIG_ATH79_MACH_EW_DORIN=y
+CONFIG_ATH79_MACH_HORNET_UB=y
+CONFIG_ATH79_MACH_JA76PF=y
+CONFIG_ATH79_MACH_JWAP003=y
+CONFIG_ATH79_MACH_MZK_W04NU=y
+CONFIG_ATH79_MACH_MZK_W300NH=y
+CONFIG_ATH79_MACH_NBG460N=y
+CONFIG_ATH79_MACH_OM2P=y
+CONFIG_ATH79_MACH_PB42=y
+CONFIG_ATH79_MACH_PB44=y
+CONFIG_ATH79_MACH_PB92=y
+CONFIG_ATH79_MACH_RB2011=y
+CONFIG_ATH79_MACH_RB4XX=y
+CONFIG_ATH79_MACH_RB750=y
+CONFIG_ATH79_MACH_RW2458N=y
+CONFIG_ATH79_MACH_TEW_632BRP=y
+CONFIG_ATH79_MACH_TEW_673GRU=y
+CONFIG_ATH79_MACH_TEW_712BR=y
+CONFIG_ATH79_MACH_TL_MR11U=y
+CONFIG_ATH79_MACH_TL_MR3020=y
+CONFIG_ATH79_MACH_TL_MR3X20=y
+CONFIG_ATH79_MACH_TL_WA901ND=y
+CONFIG_ATH79_MACH_TL_WA901ND_V2=y
+CONFIG_ATH79_MACH_TL_WDR4300=y
+CONFIG_ATH79_MACH_TL_WR1041N_V2=y
+CONFIG_ATH79_MACH_TL_WR1043ND=y
+CONFIG_ATH79_MACH_TL_WR2543N=y
+CONFIG_ATH79_MACH_TL_WR703N=y
+CONFIG_ATH79_MACH_TL_WR741ND=y
+CONFIG_ATH79_MACH_TL_WR741ND_V4=y
+CONFIG_ATH79_MACH_TL_WR841N_V1=y
+CONFIG_ATH79_MACH_TL_WR841N_V8=y
+CONFIG_ATH79_MACH_TL_WR941ND=y
+CONFIG_ATH79_MACH_UBNT=y
+CONFIG_ATH79_MACH_UBNT_XM=y
+CONFIG_ATH79_MACH_WHR_HP_G300N=y
+CONFIG_ATH79_MACH_WLAE_AG300N=y
+CONFIG_ATH79_MACH_WNDR3700=y
+CONFIG_ATH79_MACH_WNR2000=y
+CONFIG_ATH79_MACH_WP543=y
+CONFIG_ATH79_MACH_WPE72=y
+CONFIG_ATH79_MACH_WRT160NL=y
+CONFIG_ATH79_MACH_WRT400N=y
+CONFIG_ATH79_MACH_WZR_HP_AG300H=y
+CONFIG_ATH79_MACH_WZR_HP_G300NH=y
+CONFIG_ATH79_MACH_WZR_HP_G300NH2=y
+CONFIG_ATH79_MACH_WZR_HP_G450H=y
+CONFIG_ATH79_MACH_ZCN_1523H=y
+CONFIG_ATH79_NVRAM=y
+CONFIG_ATH79_PCI_ATH9K_FIXUP=y
+CONFIG_ATH79_ROUTERBOOT=y
+# CONFIG_ATH79_WDT is not set
+CONFIG_BCMA_POSSIBLE=y
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_ETHERNET_PACKET_MANGLE=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_NXP_74HC153=y
+CONFIG_GPIO_PCF857X=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_I2C=y
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_GPIO=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_SOURCE="../../root"
+CONFIG_IP17XX_PHY=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_FORCED_THREADING=y
+# CONFIG_LEDS_RB750 is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_LEDS_TRIGGER_NETDEV is not set
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_WNDR3700_USB is not set
+# CONFIG_M25PXX_USE_FAST_READ is not set
+# CONFIG_MACH_LOONGSON1 is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MICREL_PHY=y
+CONFIG_MIPS=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_MACHINE=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_MYLOADER_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_TPLINK_PARTS=y
+CONFIG_MTD_WRT160NL_PARTS=y
+CONFIG_MYLOADER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_MV88E6060=y
+CONFIG_NET_DSA_MV88E6063=y
+CONFIG_NET_DSA_TAG_TRAILER=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_PCI=y
+CONFIG_PCI_AR724X=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_RLE_DECOMPRESS=y
+CONFIG_RTL8306_PHY=y
+CONFIG_RTL8366RB_PHY=y
+CONFIG_RTL8366S_PHY=y
+CONFIG_RTL8366_SMI=y
+CONFIG_RTL8367_PHY=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_AR933X=y
+CONFIG_SERIAL_AR933X_CONSOLE=y
+CONFIG_SERIAL_AR933X_NR_UARTS=2
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+CONFIG_SOC_AR71XX=y
+CONFIG_SOC_AR724X=y
+CONFIG_SOC_AR913X=y
+CONFIG_SOC_AR933X=y
+CONFIG_SOC_AR934X=y
+CONFIG_SOC_QCA955X=y
+CONFIG_SPI=y
+CONFIG_SPI_AP83=y
+CONFIG_SPI_ATH79=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_MASTER=y
+# CONFIG_SPI_RB4XX is not set
+# CONFIG_SPI_RB4XX_CPLD is not set
+# CONFIG_SPI_VSC7385 is not set
+CONFIG_SWCONFIG=y
+CONFIG_SWCONFIG_LEDS=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_SUPPORT=y
+CONFIG_XZ_DEC=y
+CONFIG_ZONE_DMA_FLAG=0
--- /dev/null
+From 58a4dbd4160ee4a1428da23b81ff6d94c9a067a8 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sat, 4 Aug 2012 15:03:55 +0000
+Subject: [PATCH] MIPS: ath79: use a helper function for USB resource
+ initialization
+
+commit 8d3e03e186cb94a333d0176fe8b22a6df200fcc7 upstream.
+
+This improves code readability, and ensures that
+all resource fields will be initialized correctly.
+Additionally, it helps to reduce the size of the
+kernel image by using uninitialized resource
+variables.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/4171/
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ath79/dev-usb.c | 64 ++++++++++++++++++++-------------------------
+ 1 file changed, 28 insertions(+), 36 deletions(-)
+
+--- a/arch/mips/ath79/dev-usb.c
++++ b/arch/mips/ath79/dev-usb.c
+@@ -25,17 +25,7 @@
+ #include "common.h"
+ #include "dev-usb.h"
+
+-static struct resource ath79_ohci_resources[] = {
+- [0] = {
+- /* .start and .end fields are filled dynamically */
+- .flags = IORESOURCE_MEM,
+- },
+- [1] = {
+- .start = ATH79_MISC_IRQ_OHCI,
+- .end = ATH79_MISC_IRQ_OHCI,
+- .flags = IORESOURCE_IRQ,
+- },
+-};
++static struct resource ath79_ohci_resources[2];
+
+ static u64 ath79_ohci_dmamask = DMA_BIT_MASK(32);
+
+@@ -54,17 +44,7 @@ static struct platform_device ath79_ohci
+ },
+ };
+
+-static struct resource ath79_ehci_resources[] = {
+- [0] = {
+- /* .start and .end fields are filled dynamically */
+- .flags = IORESOURCE_MEM,
+- },
+- [1] = {
+- .start = ATH79_CPU_IRQ_USB,
+- .end = ATH79_CPU_IRQ_USB,
+- .flags = IORESOURCE_IRQ,
+- },
+-};
++static struct resource ath79_ehci_resources[2];
+
+ static u64 ath79_ehci_dmamask = DMA_BIT_MASK(32);
+
+@@ -90,6 +70,20 @@ static struct platform_device ath79_ehci
+ },
+ };
+
++static void __init ath79_usb_init_resource(struct resource res[2],
++ unsigned long base,
++ unsigned long size,
++ int irq)
++{
++ res[0].flags = IORESOURCE_MEM;
++ res[0].start = base;
++ res[0].end = base + size - 1;
++
++ res[1].flags = IORESOURCE_IRQ;
++ res[1].start = irq;
++ res[1].end = irq;
++}
++
+ #define AR71XX_USB_RESET_MASK (AR71XX_RESET_USB_HOST | \
+ AR71XX_RESET_USB_PHY | \
+ AR71XX_RESET_USB_OHCI_DLL)
+@@ -114,12 +108,12 @@ static void __init ath79_usb_setup(void)
+
+ mdelay(900);
+
+- ath79_ohci_resources[0].start = AR71XX_OHCI_BASE;
+- ath79_ohci_resources[0].end = AR71XX_OHCI_BASE + AR71XX_OHCI_SIZE - 1;
++ ath79_usb_init_resource(ath79_ohci_resources, AR71XX_OHCI_BASE,
++ AR71XX_OHCI_SIZE, ATH79_MISC_IRQ_OHCI);
+ platform_device_register(&ath79_ohci_device);
+
+- ath79_ehci_resources[0].start = AR71XX_EHCI_BASE;
+- ath79_ehci_resources[0].end = AR71XX_EHCI_BASE + AR71XX_EHCI_SIZE - 1;
++ ath79_usb_init_resource(ath79_ehci_resources, AR71XX_EHCI_BASE,
++ AR71XX_EHCI_SIZE, ATH79_CPU_IRQ_USB);
+ ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v1;
+ platform_device_register(&ath79_ehci_device);
+ }
+@@ -143,10 +137,8 @@ static void __init ar7240_usb_setup(void
+
+ iounmap(usb_ctrl_base);
+
+- ath79_ohci_resources[0].start = AR7240_OHCI_BASE;
+- ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1;
+- ath79_ohci_resources[1].start = ATH79_CPU_IRQ_USB;
+- ath79_ohci_resources[1].end = ATH79_CPU_IRQ_USB;
++ ath79_usb_init_resource(ath79_ohci_resources, AR7240_OHCI_BASE,
++ AR7240_OHCI_SIZE, ATH79_CPU_IRQ_USB);
+ platform_device_register(&ath79_ohci_device);
+ }
+
+@@ -161,8 +153,8 @@ static void __init ar724x_usb_setup(void
+ ath79_device_reset_clear(AR724X_RESET_USB_PHY);
+ mdelay(10);
+
+- ath79_ehci_resources[0].start = AR724X_EHCI_BASE;
+- ath79_ehci_resources[0].end = AR724X_EHCI_BASE + AR724X_EHCI_SIZE - 1;
++ ath79_usb_init_resource(ath79_ehci_resources, AR724X_EHCI_BASE,
++ AR724X_EHCI_SIZE, ATH79_CPU_IRQ_USB);
+ ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
+ platform_device_register(&ath79_ehci_device);
+ }
+@@ -178,8 +170,8 @@ static void __init ar913x_usb_setup(void
+ ath79_device_reset_clear(AR913X_RESET_USB_PHY);
+ mdelay(10);
+
+- ath79_ehci_resources[0].start = AR913X_EHCI_BASE;
+- ath79_ehci_resources[0].end = AR913X_EHCI_BASE + AR913X_EHCI_SIZE - 1;
++ ath79_usb_init_resource(ath79_ehci_resources, AR913X_EHCI_BASE,
++ AR913X_EHCI_SIZE, ATH79_CPU_IRQ_USB);
+ ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
+ platform_device_register(&ath79_ehci_device);
+ }
+@@ -195,8 +187,8 @@ static void __init ar933x_usb_setup(void
+ ath79_device_reset_clear(AR933X_RESET_USB_PHY);
+ mdelay(10);
+
+- ath79_ehci_resources[0].start = AR933X_EHCI_BASE;
+- ath79_ehci_resources[0].end = AR933X_EHCI_BASE + AR933X_EHCI_SIZE - 1;
++ ath79_usb_init_resource(ath79_ehci_resources, AR933X_EHCI_BASE,
++ AR933X_EHCI_SIZE, ATH79_CPU_IRQ_USB);
+ ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
+ platform_device_register(&ath79_ehci_device);
+ }
--- /dev/null
+From 9d9e4d955b1def6d63470bcf45e8ead1b2ae4892 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sat, 4 Aug 2012 15:03:56 +0000
+Subject: [PATCH] MIPS: ath79: add USB platform setup code for AR934X
+
+commit 00ffed582fe8a3f7556593c0e8baaf3da3df85b0 upstream.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/4172/
+Signed-off-by: John Crispin <blogic@openwrt.org>
+
+Conflicts:
+
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+---
+ arch/mips/ath79/dev-usb.c | 28 ++++++++++++++++++++++++
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 7 ++++++
+ 2 files changed, 35 insertions(+)
+
+--- a/arch/mips/ath79/dev-usb.c
++++ b/arch/mips/ath79/dev-usb.c
+@@ -193,6 +193,32 @@ static void __init ar933x_usb_setup(void
+ platform_device_register(&ath79_ehci_device);
+ }
+
++static void __init ar934x_usb_setup(void)
++{
++ u32 bootstrap;
++
++ bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
++ if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
++ return;
++
++ ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE);
++ udelay(1000);
++
++ ath79_device_reset_clear(AR934X_RESET_USB_PHY);
++ udelay(1000);
++
++ ath79_device_reset_clear(AR934X_RESET_USB_PHY_ANALOG);
++ udelay(1000);
++
++ ath79_device_reset_clear(AR934X_RESET_USB_HOST);
++ udelay(1000);
++
++ ath79_usb_init_resource(ath79_ehci_resources, AR934X_EHCI_BASE,
++ AR934X_EHCI_SIZE, ATH79_CPU_IRQ_USB);
++ ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
++ platform_device_register(&ath79_ehci_device);
++}
++
+ void __init ath79_register_usb(void)
+ {
+ if (soc_is_ar71xx())
+@@ -205,6 +231,8 @@ void __init ath79_register_usb(void)
+ ar913x_usb_setup();
+ else if (soc_is_ar933x())
+ ar933x_usb_setup();
++ else if (soc_is_ar934x())
++ ar934x_usb_setup();
+ else
+ BUG();
+ }
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -65,6 +65,8 @@
+ #define AR934X_WMAC_SIZE 0x20000
+ #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
+ #define AR934X_SRIF_SIZE 0x1000
++#define AR934X_EHCI_BASE 0x1b000000
++#define AR934X_EHCI_SIZE 0x200
+
+ /*
+ * DDR_CTRL block
+@@ -290,6 +292,11 @@
+ #define AR933X_RESET_USB_PHY BIT(4)
+ #define AR933X_RESET_USBSUS_OVERRIDE BIT(3)
+
++#define AR934X_RESET_USB_PHY_ANALOG BIT(11)
++#define AR934X_RESET_USB_HOST BIT(5)
++#define AR934X_RESET_USB_PHY BIT(4)
++#define AR934X_RESET_USBSUS_OVERRIDE BIT(3)
++
+ #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
+
+ #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)
--- /dev/null
+From f60097efacfaebd2d4cf2c301fb865edc9806f47 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sat, 4 Aug 2012 15:03:57 +0000
+Subject: [PATCH] MIPS: ath79: register USB host controller on the DB120 board
+
+commit a0aa4577ec579eb230557b85d721fd019ea69e02 upstream.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Patchwork: http://patchwork.linux-mips.org/patch/4173/
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ath79/mach-db120.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/arch/mips/ath79/mach-db120.c
++++ b/arch/mips/ath79/mach-db120.c
+@@ -25,6 +25,7 @@
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+ #include "dev-spi.h"
++#include "dev-usb.h"
+ #include "dev-wmac.h"
+ #include "pci.h"
+
+@@ -126,6 +127,7 @@ static void __init db120_setup(void)
+ db120_gpio_keys);
+ ath79_register_spi(&db120_spi_data, db120_spi_info,
+ ARRAY_SIZE(db120_spi_info));
++ ath79_register_usb();
+ ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
+ db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
+ }
--- /dev/null
+From 4b0f8aaea1f9e2f931c4de785d9ce46ff7164627 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 17 Jun 2012 12:55:24 +0200
+Subject: [PATCH 02/34] MIPS: pci-ar724x: use correct value for AR724X_PCI_MEM_SIZE
+
+The current definiton is wrong, it is conflicting
+with AR724X_PCI_CFG_BASE.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/pci/pci-ar724x.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -21,7 +21,7 @@
+ #define AR724X_PCI_CTRL_SIZE 0x100
+
+ #define AR724X_PCI_MEM_BASE 0x10000000
+-#define AR724X_PCI_MEM_SIZE 0x08000000
++#define AR724X_PCI_MEM_SIZE 0x04000000
+
+ #define AR724X_PCI_REG_RESET 0x18
+ #define AR724X_PCI_REG_INT_STATUS 0x4c
--- /dev/null
+From 01dbfe17b8ff628b6e2b3c75e1fc8c11d4cca644 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Thu, 28 Jun 2012 19:19:58 +0200
+Subject: [PATCH 03/34] MIPS: pci-ar71xx: fix AR71XX_PCI_MEM_SIZE
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/pci/pci-ar71xx.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/pci/pci-ar71xx.c
++++ b/arch/mips/pci/pci-ar71xx.c
+@@ -24,7 +24,7 @@
+ #include <asm/mach-ath79/pci.h>
+
+ #define AR71XX_PCI_MEM_BASE 0x10000000
+-#define AR71XX_PCI_MEM_SIZE 0x08000000
++#define AR71XX_PCI_MEM_SIZE 0x07000000
+
+ #define AR71XX_PCI_WIN0_OFFS 0x10000000
+ #define AR71XX_PCI_WIN1_OFFS 0x11000000
--- /dev/null
+From f2d2d928c3900b67a5f95e53b86de5b61a3ab12c Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 11 Jun 2012 13:19:44 +0200
+Subject: [PATCH 04/34] MIPS: pci-ar724x: convert to a platform driver
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/pci/pci-ar724x.c | 57 ++++++++++++++++++++++++++++++++++++++++++-
+ 1 files changed, 55 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -11,6 +11,8 @@
+
+ #include <linux/irq.h>
+ #include <linux/pci.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
+ #include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ #include <asm/mach-ath79/pci.h>
+@@ -262,7 +264,7 @@ static struct irq_chip ar724x_pci_irq_ch
+ .irq_mask_ack = ar724x_pci_irq_mask,
+ };
+
+-static void __init ar724x_pci_irq_init(int irq)
++static void __devinit ar724x_pci_irq_init(int irq)
+ {
+ void __iomem *base;
+ int i;
+@@ -282,7 +284,7 @@ static void __init ar724x_pci_irq_init(i
+ irq_set_chained_handler(irq, ar724x_pci_irq_handler);
+ }
+
+-int __init ar724x_pcibios_init(int irq)
++int __devinit ar724x_pcibios_init(int irq)
+ {
+ int ret;
+
+@@ -312,3 +314,54 @@ err_unmap_devcfg:
+ err:
+ return ret;
+ }
++
++static int __devinit ar724x_pci_probe(struct platform_device *pdev)
++{
++ struct resource *res;
++ int irq;
++
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl_base");
++ if (!res)
++ return -EINVAL;
++
++ ar724x_pci_ctrl_base = devm_request_and_ioremap(&pdev->dev, res);
++ if (ar724x_pci_ctrl_base == NULL)
++ return -EBUSY;
++
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base");
++ if (!res)
++ return -EINVAL;
++
++ ar724x_pci_devcfg_base = devm_request_and_ioremap(&pdev->dev, res);
++ if (!ar724x_pci_devcfg_base)
++ return -EBUSY;
++
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return -EINVAL;
++
++ ar724x_pci_link_up = ar724x_pci_check_link();
++ if (!ar724x_pci_link_up)
++ dev_warn(&pdev->dev, "PCIe link is down\n");
++
++ ar724x_pci_irq_init(irq);
++
++ register_pci_controller(&ar724x_pci_controller);
++
++ return 0;
++}
++
++static struct platform_driver ar724x_pci_driver = {
++ .probe = ar724x_pci_probe,
++ .driver = {
++ .name = "ar724x-pci",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init ar724x_pci_init(void)
++{
++ return platform_driver_register(&ar724x_pci_driver);
++}
++
++postcore_initcall(ar724x_pci_init);
--- /dev/null
+From d1a22e73f991145a4abd7d0c37bcf318703c89ed Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 11 Jun 2012 13:24:55 +0200
+Subject: [PATCH 05/34] MIPS: pci-ar71xx: convert to a platform driver
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/pci/pci-ar71xx.c | 60 +++++++++++++++++++++++++++++++++++++++++---
+ 1 files changed, 56 insertions(+), 4 deletions(-)
+
+--- a/arch/mips/pci/pci-ar71xx.c
++++ b/arch/mips/pci/pci-ar71xx.c
+@@ -18,6 +18,8 @@
+ #include <linux/pci.h>
+ #include <linux/pci_regs.h>
+ #include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
+
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ #include <asm/mach-ath79/ath79.h>
+@@ -309,7 +311,7 @@ static struct irq_chip ar71xx_pci_irq_ch
+ .irq_mask_ack = ar71xx_pci_irq_mask,
+ };
+
+-static __init void ar71xx_pci_irq_init(void)
++static __devinit void ar71xx_pci_irq_init(int irq)
+ {
+ void __iomem *base = ath79_reset_base;
+ int i;
+@@ -324,10 +326,10 @@ static __init void ar71xx_pci_irq_init(v
+ irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip,
+ handle_level_irq);
+
+- irq_set_chained_handler(ATH79_CPU_IRQ_IP2, ar71xx_pci_irq_handler);
++ irq_set_chained_handler(irq, ar71xx_pci_irq_handler);
+ }
+
+-static __init void ar71xx_pci_reset(void)
++static __devinit void ar71xx_pci_reset(void)
+ {
+ void __iomem *ddr_base = ath79_ddr_base;
+
+@@ -367,9 +369,59 @@ __init int ar71xx_pcibios_init(void)
+ /* clear bus errors */
+ ar71xx_pci_check_error(1);
+
+- ar71xx_pci_irq_init();
++ ar71xx_pci_irq_init(ATH79_CPU_IRQ_IP2);
+
+ register_pci_controller(&ar71xx_pci_controller);
+
+ return 0;
+ }
++
++static int __devinit ar71xx_pci_probe(struct platform_device *pdev)
++{
++ struct resource *res;
++ int irq;
++ u32 t;
++
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base");
++ if (!res)
++ return -EINVAL;
++
++ ar71xx_pcicfg_base = devm_request_and_ioremap(&pdev->dev, res);
++ if (!ar71xx_pcicfg_base)
++ return -ENOMEM;
++
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return -EINVAL;
++
++ ar71xx_pci_reset();
++
++ /* setup COMMAND register */
++ t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE
++ | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK;
++ ar71xx_pci_local_write(PCI_COMMAND, 4, t);
++
++ /* clear bus errors */
++ ar71xx_pci_check_error(1);
++
++ ar71xx_pci_irq_init(irq);
++
++ register_pci_controller(&ar71xx_pci_controller);
++
++ return 0;
++}
++
++static struct platform_driver ar71xx_pci_driver = {
++ .probe = ar71xx_pci_probe,
++ .driver = {
++ .name = "ar71xx-pci",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init ar71xx_pci_init(void)
++{
++ return platform_driver_register(&ar71xx_pci_driver);
++}
++
++postcore_initcall(ar71xx_pci_init);
--- /dev/null
+From c3a8b5fa196cedc4b940c1e5ec482dd875aa3180 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 11 Jun 2012 13:38:06 +0200
+Subject: [PATCH 06/34] MIPS: ath79: move global PCI defines into a common header
+
+The constants will be used by a subsequent patch.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 24 ++++++++++++++++++++++++
+ arch/mips/pci/pci-ar71xx.c | 16 ----------------
+ arch/mips/pci/pci-ar724x.c | 8 --------
+ 3 files changed, 24 insertions(+), 24 deletions(-)
+
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -41,11 +41,35 @@
+ #define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000)
+ #define AR71XX_RESET_SIZE 0x100
+
++#define AR71XX_PCI_MEM_BASE 0x10000000
++#define AR71XX_PCI_MEM_SIZE 0x07000000
++
++#define AR71XX_PCI_WIN0_OFFS 0x10000000
++#define AR71XX_PCI_WIN1_OFFS 0x11000000
++#define AR71XX_PCI_WIN2_OFFS 0x12000000
++#define AR71XX_PCI_WIN3_OFFS 0x13000000
++#define AR71XX_PCI_WIN4_OFFS 0x14000000
++#define AR71XX_PCI_WIN5_OFFS 0x15000000
++#define AR71XX_PCI_WIN6_OFFS 0x16000000
++#define AR71XX_PCI_WIN7_OFFS 0x07000000
++
++#define AR71XX_PCI_CFG_BASE \
++ (AR71XX_PCI_MEM_BASE + AR71XX_PCI_WIN7_OFFS + 0x10000)
++#define AR71XX_PCI_CFG_SIZE 0x100
++
+ #define AR7240_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000)
+ #define AR7240_USB_CTRL_SIZE 0x100
+ #define AR7240_OHCI_BASE 0x1b000000
+ #define AR7240_OHCI_SIZE 0x1000
+
++#define AR724X_PCI_MEM_BASE 0x10000000
++#define AR724X_PCI_MEM_SIZE 0x04000000
++
++#define AR724X_PCI_CFG_BASE 0x14000000
++#define AR724X_PCI_CFG_SIZE 0x1000
++#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000f0000)
++#define AR724X_PCI_CTRL_SIZE 0x100
++
+ #define AR724X_EHCI_BASE 0x1b000000
+ #define AR724X_EHCI_SIZE 0x1000
+
+--- a/arch/mips/pci/pci-ar71xx.c
++++ b/arch/mips/pci/pci-ar71xx.c
+@@ -25,22 +25,6 @@
+ #include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/pci.h>
+
+-#define AR71XX_PCI_MEM_BASE 0x10000000
+-#define AR71XX_PCI_MEM_SIZE 0x07000000
+-
+-#define AR71XX_PCI_WIN0_OFFS 0x10000000
+-#define AR71XX_PCI_WIN1_OFFS 0x11000000
+-#define AR71XX_PCI_WIN2_OFFS 0x12000000
+-#define AR71XX_PCI_WIN3_OFFS 0x13000000
+-#define AR71XX_PCI_WIN4_OFFS 0x14000000
+-#define AR71XX_PCI_WIN5_OFFS 0x15000000
+-#define AR71XX_PCI_WIN6_OFFS 0x16000000
+-#define AR71XX_PCI_WIN7_OFFS 0x07000000
+-
+-#define AR71XX_PCI_CFG_BASE \
+- (AR71XX_PCI_MEM_BASE + AR71XX_PCI_WIN7_OFFS + 0x10000)
+-#define AR71XX_PCI_CFG_SIZE 0x100
+-
+ #define AR71XX_PCI_REG_CRP_AD_CBE 0x00
+ #define AR71XX_PCI_REG_CRP_WRDATA 0x04
+ #define AR71XX_PCI_REG_CRP_RDDATA 0x08
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -17,14 +17,6 @@
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ #include <asm/mach-ath79/pci.h>
+
+-#define AR724X_PCI_CFG_BASE 0x14000000
+-#define AR724X_PCI_CFG_SIZE 0x1000
+-#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000f0000)
+-#define AR724X_PCI_CTRL_SIZE 0x100
+-
+-#define AR724X_PCI_MEM_BASE 0x10000000
+-#define AR724X_PCI_MEM_SIZE 0x04000000
+-
+ #define AR724X_PCI_REG_RESET 0x18
+ #define AR724X_PCI_REG_INT_STATUS 0x4c
+ #define AR724X_PCI_REG_INT_MASK 0x50
--- /dev/null
+From 2fdf8dcff3ffaa806e9f9d7f1c1bd876222cff4d Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 11 Jun 2012 13:39:32 +0200
+Subject: [PATCH 07/34] MIPS: ath79: register platform devices for the PCI controllers
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/ath79/pci.c | 87 +++++++++++++++++++++++++++++++++++++++++++-----
+ 1 files changed, 78 insertions(+), 9 deletions(-)
+
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -14,6 +14,8 @@
+
+ #include <linux/init.h>
+ #include <linux/pci.h>
++#include <linux/resource.h>
++#include <linux/platform_device.h>
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ #include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/irq.h>
+@@ -110,21 +112,88 @@ void __init ath79_pci_set_plat_dev_init(
+ ath79_pci_plat_dev_init = func;
+ }
+
+-int __init ath79_register_pci(void)
++static struct platform_device *
++ath79_register_pci_ar71xx(void)
+ {
+- if (soc_is_ar71xx())
+- return ar71xx_pcibios_init();
++ struct platform_device *pdev;
++ struct resource res[2];
++
++ memset(res, 0, sizeof(res));
+
+- if (soc_is_ar724x())
+- return ar724x_pcibios_init(ATH79_CPU_IRQ_IP2);
++ res[0].name = "cfg_base";
++ res[0].flags = IORESOURCE_MEM;
++ res[0].start = AR71XX_PCI_CFG_BASE;
++ res[0].end = AR71XX_PCI_CFG_BASE + AR71XX_PCI_CFG_SIZE - 1;
++
++ res[1].flags = IORESOURCE_IRQ;
++ res[1].start = ATH79_CPU_IRQ_IP2;
++ res[1].end = ATH79_CPU_IRQ_IP2;
++
++ pdev = platform_device_register_simple("ar71xx-pci", -1,
++ res, ARRAY_SIZE(res));
++ return pdev;
++}
+
+- if (soc_is_ar9342() || soc_is_ar9344()) {
++static struct platform_device *
++ath79_register_pci_ar724x(int id,
++ unsigned long cfg_base,
++ unsigned long ctrl_base,
++ int irq)
++{
++ struct platform_device *pdev;
++ struct resource res[3];
++
++ memset(res, 0, sizeof(res));
++
++ res[0].name = "cfg_base";
++ res[0].flags = IORESOURCE_MEM;
++ res[0].start = cfg_base;
++ res[0].end = cfg_base + AR724X_PCI_CFG_SIZE - 1;
++
++ res[1].name = "ctrl_base";
++ res[1].flags = IORESOURCE_MEM;
++ res[1].start = ctrl_base;
++ res[1].end = ctrl_base + AR724X_PCI_CTRL_SIZE - 1;
++
++ res[2].flags = IORESOURCE_IRQ;
++ res[2].start = irq;
++ res[2].end = irq;
++
++ pdev = platform_device_register_simple("ar724x-pci", id,
++ res, ARRAY_SIZE(res));
++ return pdev;
++}
++
++int __init ath79_register_pci(void)
++{
++ struct platform_device *pdev = NULL;
++
++ if (soc_is_ar71xx()) {
++ pdev = ath79_register_pci_ar71xx();
++ } else if (soc_is_ar724x()) {
++ pdev = ath79_register_pci_ar724x(-1,
++ AR724X_PCI_CFG_BASE,
++ AR724X_PCI_CTRL_BASE,
++ ATH79_CPU_IRQ_IP2);
++ } else if (soc_is_ar9342() ||
++ soc_is_ar9344()) {
+ u32 bootstrap;
+
+ bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
+- if (bootstrap & AR934X_BOOTSTRAP_PCIE_RC)
+- return ar724x_pcibios_init(ATH79_IP2_IRQ(0));
++ if ((bootstrap & AR934X_BOOTSTRAP_PCIE_RC) == 0)
++ return -ENODEV;
++
++ pdev = ath79_register_pci_ar724x(-1,
++ AR724X_PCI_CFG_BASE,
++ AR724X_PCI_CTRL_BASE,
++ ATH79_IP2_IRQ(0));
++ } else {
++ /* No PCI support */
++ return -ENODEV;
+ }
+
+- return -ENODEV;
++ if (!pdev)
++ pr_err("unable to register PCI controller device\n");
++
++ return pdev ? 0 : -ENODEV;
+ }
--- /dev/null
+From 07224e2fa5f889162ee0560c6ab1eb8cd16a8dd2 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 11 Jun 2012 14:59:39 +0200
+Subject: [PATCH 08/34] MIPS: ath79: remove unused ar7{1x,24}x_pcibios_init functions
+
+The functions are unused now, so remove them.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/ath79/pci.c | 1 -
+ arch/mips/include/asm/mach-ath79/pci.h | 28 ----------------------------
+ arch/mips/pci/pci-ar71xx.c | 26 --------------------------
+ arch/mips/pci/pci-ar724x.c | 32 --------------------------------
+ 4 files changed, 0 insertions(+), 87 deletions(-)
+ delete mode 100644 arch/mips/include/asm/mach-ath79/pci.h
+
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -19,7 +19,6 @@
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ #include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/irq.h>
+-#include <asm/mach-ath79/pci.h>
+ #include "pci.h"
+
+ static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
+--- a/arch/mips/include/asm/mach-ath79/pci.h
++++ /dev/null
+@@ -1,28 +0,0 @@
+-/*
+- * Atheros AR71XX/AR724X PCI support
+- *
+- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
+- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- */
+-
+-#ifndef __ASM_MACH_ATH79_PCI_H
+-#define __ASM_MACH_ATH79_PCI_H
+-
+-#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR71XX)
+-int ar71xx_pcibios_init(void);
+-#else
+-static inline int ar71xx_pcibios_init(void) { return 0; }
+-#endif
+-
+-#if defined(CONFIG_PCI_AR724X)
+-int ar724x_pcibios_init(int irq);
+-#else
+-static inline int ar724x_pcibios_init(int irq) { return 0; }
+-#endif
+-
+-#endif /* __ASM_MACH_ATH79_PCI_H */
+--- a/arch/mips/pci/pci-ar71xx.c
++++ b/arch/mips/pci/pci-ar71xx.c
+@@ -23,7 +23,6 @@
+
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ #include <asm/mach-ath79/ath79.h>
+-#include <asm/mach-ath79/pci.h>
+
+ #define AR71XX_PCI_REG_CRP_AD_CBE 0x00
+ #define AR71XX_PCI_REG_CRP_WRDATA 0x04
+@@ -335,31 +334,6 @@ static __devinit void ar71xx_pci_reset(v
+ mdelay(100);
+ }
+
+-__init int ar71xx_pcibios_init(void)
+-{
+- u32 t;
+-
+- ar71xx_pcicfg_base = ioremap(AR71XX_PCI_CFG_BASE, AR71XX_PCI_CFG_SIZE);
+- if (ar71xx_pcicfg_base == NULL)
+- return -ENOMEM;
+-
+- ar71xx_pci_reset();
+-
+- /* setup COMMAND register */
+- t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE
+- | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK;
+- ar71xx_pci_local_write(PCI_COMMAND, 4, t);
+-
+- /* clear bus errors */
+- ar71xx_pci_check_error(1);
+-
+- ar71xx_pci_irq_init(ATH79_CPU_IRQ_IP2);
+-
+- register_pci_controller(&ar71xx_pci_controller);
+-
+- return 0;
+-}
+-
+ static int __devinit ar71xx_pci_probe(struct platform_device *pdev)
+ {
+ struct resource *res;
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -15,7 +15,6 @@
+ #include <linux/platform_device.h>
+ #include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/ar71xx_regs.h>
+-#include <asm/mach-ath79/pci.h>
+
+ #define AR724X_PCI_REG_RESET 0x18
+ #define AR724X_PCI_REG_INT_STATUS 0x4c
+@@ -276,37 +275,6 @@ static void __devinit ar724x_pci_irq_ini
+ irq_set_chained_handler(irq, ar724x_pci_irq_handler);
+ }
+
+-int __devinit ar724x_pcibios_init(int irq)
+-{
+- int ret;
+-
+- ret = -ENOMEM;
+-
+- ar724x_pci_devcfg_base = ioremap(AR724X_PCI_CFG_BASE,
+- AR724X_PCI_CFG_SIZE);
+- if (ar724x_pci_devcfg_base == NULL)
+- goto err;
+-
+- ar724x_pci_ctrl_base = ioremap(AR724X_PCI_CTRL_BASE,
+- AR724X_PCI_CTRL_SIZE);
+- if (ar724x_pci_ctrl_base == NULL)
+- goto err_unmap_devcfg;
+-
+- ar724x_pci_link_up = ar724x_pci_check_link();
+- if (!ar724x_pci_link_up)
+- pr_warn("ar724x: PCIe link is down\n");
+-
+- ar724x_pci_irq_init(irq);
+- register_pci_controller(&ar724x_pci_controller);
+-
+- return PCIBIOS_SUCCESSFUL;
+-
+-err_unmap_devcfg:
+- iounmap(ar724x_pci_devcfg_base);
+-err:
+- return ret;
+-}
+-
+ static int __devinit ar724x_pci_probe(struct platform_device *pdev)
+ {
+ struct resource *res;
--- /dev/null
+From a018b28d3953a32008de839d997a992a724ae314 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 24 Jun 2012 17:40:45 +0200
+Subject: [PATCH 09/34] MIPS: avoid possible resource conflict in register_pci_controller
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/pci/pci.c | 15 +++++++++++++--
+ 1 files changed, 13 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/pci/pci.c
++++ b/arch/mips/pci/pci.c
+@@ -176,9 +176,20 @@ static DEFINE_MUTEX(pci_scan_mutex);
+
+ void __devinit register_pci_controller(struct pci_controller *hose)
+ {
+- if (request_resource(&iomem_resource, hose->mem_resource) < 0)
++ struct resource *parent;
++
++ parent = hose->mem_resource->parent;
++ if (!parent)
++ parent = &iomem_resource;
++
++ if (request_resource(parent, hose->mem_resource) < 0)
+ goto out;
+- if (request_resource(&ioport_resource, hose->io_resource) < 0) {
++
++ parent = hose->io_resource->parent;
++ if (!parent)
++ parent = &ioport_resource;
++
++ if (request_resource(parent, hose->io_resource) < 0) {
+ release_resource(hose->mem_resource);
+ goto out;
+ }
--- /dev/null
+From 242aedf3246dc5085271aca56134ac455bfb64b5 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 24 Jun 2012 11:51:34 +0200
+Subject: [PATCH 10/34] MIPS: pci-ar724x: use dynamically allocated PCI controller structure
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/pci/pci-ar724x.c | 129 ++++++++++++++++++++++++++++----------------
+ 1 files changed, 82 insertions(+), 47 deletions(-)
+
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -9,6 +9,7 @@
+ * by the Free Software Foundation.
+ */
+
++#include <linux/spinlock.h>
+ #include <linux/irq.h>
+ #include <linux/pci.h>
+ #include <linux/module.h>
+@@ -28,38 +29,56 @@
+
+ #define AR7240_BAR0_WAR_VALUE 0xffff
+
+-static DEFINE_SPINLOCK(ar724x_pci_lock);
+-static void __iomem *ar724x_pci_devcfg_base;
+-static void __iomem *ar724x_pci_ctrl_base;
+-
+-static u32 ar724x_pci_bar0_value;
+-static bool ar724x_pci_bar0_is_cached;
+-static bool ar724x_pci_link_up;
++struct ar724x_pci_controller {
++ void __iomem *devcfg_base;
++ void __iomem *ctrl_base;
+
+-static inline bool ar724x_pci_check_link(void)
++ int irq;
++
++ bool link_up;
++ bool bar0_is_cached;
++ u32 bar0_value;
++
++ spinlock_t lock;
++
++ struct pci_controller pci_controller;
++};
++
++static inline bool ar724x_pci_check_link(struct ar724x_pci_controller *apc)
+ {
+ u32 reset;
+
+- reset = __raw_readl(ar724x_pci_ctrl_base + AR724X_PCI_REG_RESET);
++ reset = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_RESET);
+ return reset & AR724X_PCI_RESET_LINK_UP;
+ }
+
++static inline struct ar724x_pci_controller *
++pci_bus_to_ar724x_controller(struct pci_bus *bus)
++{
++ struct pci_controller *hose;
++
++ hose = (struct pci_controller *) bus->sysdata;
++ return container_of(hose, struct ar724x_pci_controller, pci_controller);
++}
++
+ static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, uint32_t *value)
+ {
++ struct ar724x_pci_controller *apc;
+ unsigned long flags;
+ void __iomem *base;
+ u32 data;
+
+- if (!ar724x_pci_link_up)
++ apc = pci_bus_to_ar724x_controller(bus);
++ if (!apc->link_up)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (devfn)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+- base = ar724x_pci_devcfg_base;
++ base = apc->devcfg_base;
+
+- spin_lock_irqsave(&ar724x_pci_lock, flags);
++ spin_lock_irqsave(&apc->lock, flags);
+ data = __raw_readl(base + (where & ~3));
+
+ switch (size) {
+@@ -78,17 +97,17 @@ static int ar724x_pci_read(struct pci_bu
+ case 4:
+ break;
+ default:
+- spin_unlock_irqrestore(&ar724x_pci_lock, flags);
++ spin_unlock_irqrestore(&apc->lock, flags);
+
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+
+- spin_unlock_irqrestore(&ar724x_pci_lock, flags);
++ spin_unlock_irqrestore(&apc->lock, flags);
+
+ if (where == PCI_BASE_ADDRESS_0 && size == 4 &&
+- ar724x_pci_bar0_is_cached) {
++ apc->bar0_is_cached) {
+ /* use the cached value */
+- *value = ar724x_pci_bar0_value;
++ *value = apc->bar0_value;
+ } else {
+ *value = data;
+ }
+@@ -99,12 +118,14 @@ static int ar724x_pci_read(struct pci_bu
+ static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, uint32_t value)
+ {
++ struct ar724x_pci_controller *apc;
+ unsigned long flags;
+ void __iomem *base;
+ u32 data;
+ int s;
+
+- if (!ar724x_pci_link_up)
++ apc = pci_bus_to_ar724x_controller(bus);
++ if (!apc->link_up)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (devfn)
+@@ -122,18 +143,18 @@ static int ar724x_pci_write(struct pci_b
+ * BAR0 register in order to make the device memory
+ * accessible.
+ */
+- ar724x_pci_bar0_is_cached = true;
+- ar724x_pci_bar0_value = value;
++ apc->bar0_is_cached = true;
++ apc->bar0_value = value;
+
+ value = AR7240_BAR0_WAR_VALUE;
+ } else {
+- ar724x_pci_bar0_is_cached = false;
++ apc->bar0_is_cached = false;
+ }
+ }
+
+- base = ar724x_pci_devcfg_base;
++ base = apc->devcfg_base;
+
+- spin_lock_irqsave(&ar724x_pci_lock, flags);
++ spin_lock_irqsave(&apc->lock, flags);
+ data = __raw_readl(base + (where & ~3));
+
+ switch (size) {
+@@ -151,7 +172,7 @@ static int ar724x_pci_write(struct pci_b
+ data = value;
+ break;
+ default:
+- spin_unlock_irqrestore(&ar724x_pci_lock, flags);
++ spin_unlock_irqrestore(&apc->lock, flags);
+
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+@@ -159,7 +180,7 @@ static int ar724x_pci_write(struct pci_b
+ __raw_writel(data, base + (where & ~3));
+ /* flush write */
+ __raw_readl(base + (where & ~3));
+- spin_unlock_irqrestore(&ar724x_pci_lock, flags);
++ spin_unlock_irqrestore(&apc->lock, flags);
+
+ return PCIBIOS_SUCCESSFUL;
+ }
+@@ -183,18 +204,14 @@ static struct resource ar724x_mem_resour
+ .flags = IORESOURCE_MEM,
+ };
+
+-static struct pci_controller ar724x_pci_controller = {
+- .pci_ops = &ar724x_pci_ops,
+- .io_resource = &ar724x_io_resource,
+- .mem_resource = &ar724x_mem_resource,
+-};
+-
+ static void ar724x_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
+ {
++ struct ar724x_pci_controller *apc;
+ void __iomem *base;
+ u32 pending;
+
+- base = ar724x_pci_ctrl_base;
++ apc = irq_get_handler_data(irq);
++ base = apc->ctrl_base;
+
+ pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) &
+ __raw_readl(base + AR724X_PCI_REG_INT_MASK);
+@@ -208,10 +225,12 @@ static void ar724x_pci_irq_handler(unsig
+
+ static void ar724x_pci_irq_unmask(struct irq_data *d)
+ {
++ struct ar724x_pci_controller *apc;
+ void __iomem *base;
+ u32 t;
+
+- base = ar724x_pci_ctrl_base;
++ apc = irq_data_get_irq_chip_data(d);
++ base = apc->ctrl_base;
+
+ switch (d->irq) {
+ case ATH79_PCI_IRQ(0):
+@@ -225,10 +244,12 @@ static void ar724x_pci_irq_unmask(struct
+
+ static void ar724x_pci_irq_mask(struct irq_data *d)
+ {
++ struct ar724x_pci_controller *apc;
+ void __iomem *base;
+ u32 t;
+
+- base = ar724x_pci_ctrl_base;
++ apc = irq_data_get_irq_chip_data(d);
++ base = apc->ctrl_base;
+
+ switch (d->irq) {
+ case ATH79_PCI_IRQ(0):
+@@ -255,12 +276,12 @@ static struct irq_chip ar724x_pci_irq_ch
+ .irq_mask_ack = ar724x_pci_irq_mask,
+ };
+
+-static void __devinit ar724x_pci_irq_init(int irq)
++static void __devinit ar724x_pci_irq_init(struct ar724x_pci_controller *apc)
+ {
+ void __iomem *base;
+ int i;
+
+- base = ar724x_pci_ctrl_base;
++ base = apc->ctrl_base;
+
+ __raw_writel(0, base + AR724X_PCI_REG_INT_MASK);
+ __raw_writel(0, base + AR724X_PCI_REG_INT_STATUS);
+@@ -268,45 +289,59 @@ static void __devinit ar724x_pci_irq_ini
+ BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR724X_PCI_IRQ_COUNT);
+
+ for (i = ATH79_PCI_IRQ_BASE;
+- i < ATH79_PCI_IRQ_BASE + AR724X_PCI_IRQ_COUNT; i++)
++ i < ATH79_PCI_IRQ_BASE + AR724X_PCI_IRQ_COUNT; i++) {
+ irq_set_chip_and_handler(i, &ar724x_pci_irq_chip,
+ handle_level_irq);
++ irq_set_chip_data(i, apc);
++ }
+
+- irq_set_chained_handler(irq, ar724x_pci_irq_handler);
++ irq_set_handler_data(apc->irq, apc);
++ irq_set_chained_handler(apc->irq, ar724x_pci_irq_handler);
+ }
+
+ static int __devinit ar724x_pci_probe(struct platform_device *pdev)
+ {
++ struct ar724x_pci_controller *apc;
+ struct resource *res;
+- int irq;
++
++ apc = devm_kzalloc(&pdev->dev, sizeof(struct ar724x_pci_controller),
++ GFP_KERNEL);
++ if (!apc)
++ return -ENOMEM;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl_base");
+ if (!res)
+ return -EINVAL;
+
+- ar724x_pci_ctrl_base = devm_request_and_ioremap(&pdev->dev, res);
+- if (ar724x_pci_ctrl_base == NULL)
++ apc->ctrl_base = devm_request_and_ioremap(&pdev->dev, res);
++ if (apc->ctrl_base == NULL)
+ return -EBUSY;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base");
+ if (!res)
+ return -EINVAL;
+
+- ar724x_pci_devcfg_base = devm_request_and_ioremap(&pdev->dev, res);
+- if (!ar724x_pci_devcfg_base)
++ apc->devcfg_base = devm_request_and_ioremap(&pdev->dev, res);
++ if (!apc->devcfg_base)
+ return -EBUSY;
+
+- irq = platform_get_irq(pdev, 0);
+- if (irq < 0)
++ apc->irq = platform_get_irq(pdev, 0);
++ if (apc->irq < 0)
+ return -EINVAL;
+
+- ar724x_pci_link_up = ar724x_pci_check_link();
+- if (!ar724x_pci_link_up)
++ spin_lock_init(&apc->lock);
++
++ apc->pci_controller.pci_ops = &ar724x_pci_ops;
++ apc->pci_controller.io_resource = &ar724x_io_resource;
++ apc->pci_controller.mem_resource = &ar724x_mem_resource;
++
++ apc->link_up = ar724x_pci_check_link(apc);
++ if (!apc->link_up)
+ dev_warn(&pdev->dev, "PCIe link is down\n");
+
+- ar724x_pci_irq_init(irq);
++ ar724x_pci_irq_init(apc);
+
+- register_pci_controller(&ar724x_pci_controller);
++ register_pci_controller(&apc->pci_controller);
+
+ return 0;
+ }
--- /dev/null
+From f1c3a7dadf7b77809cda7f77df4b1ba3b24fbfa3 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Wed, 27 Jun 2012 10:12:50 +0200
+Subject: [PATCH 11/34] MIPS: pci-ar724x: remove static PCI resources
+
+Get those from the platform device instead.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/ath79/pci.c | 21 ++++++++++++++++++++-
+ arch/mips/pci/pci-ar724x.c | 40 ++++++++++++++++++++++++----------------
+ 2 files changed, 44 insertions(+), 17 deletions(-)
+
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -137,10 +137,13 @@ static struct platform_device *
+ ath79_register_pci_ar724x(int id,
+ unsigned long cfg_base,
+ unsigned long ctrl_base,
++ unsigned long mem_base,
++ unsigned long mem_size,
++ unsigned long io_base,
+ int irq)
+ {
+ struct platform_device *pdev;
+- struct resource res[3];
++ struct resource res[5];
+
+ memset(res, 0, sizeof(res));
+
+@@ -158,6 +161,16 @@ ath79_register_pci_ar724x(int id,
+ res[2].start = irq;
+ res[2].end = irq;
+
++ res[3].name = "mem_base";
++ res[3].flags = IORESOURCE_MEM;
++ res[3].start = mem_base;
++ res[3].end = mem_base + mem_size - 1;
++
++ res[4].name = "io_base";
++ res[4].flags = IORESOURCE_IO;
++ res[4].start = io_base;
++ res[4].end = io_base;
++
+ pdev = platform_device_register_simple("ar724x-pci", id,
+ res, ARRAY_SIZE(res));
+ return pdev;
+@@ -173,6 +186,9 @@ int __init ath79_register_pci(void)
+ pdev = ath79_register_pci_ar724x(-1,
+ AR724X_PCI_CFG_BASE,
+ AR724X_PCI_CTRL_BASE,
++ AR724X_PCI_MEM_BASE,
++ AR724X_PCI_MEM_SIZE,
++ 0,
+ ATH79_CPU_IRQ_IP2);
+ } else if (soc_is_ar9342() ||
+ soc_is_ar9344()) {
+@@ -185,6 +201,9 @@ int __init ath79_register_pci(void)
+ pdev = ath79_register_pci_ar724x(-1,
+ AR724X_PCI_CFG_BASE,
+ AR724X_PCI_CTRL_BASE,
++ AR724X_PCI_MEM_BASE,
++ AR724X_PCI_MEM_SIZE,
++ 0,
+ ATH79_IP2_IRQ(0));
+ } else {
+ /* No PCI support */
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -42,6 +42,8 @@ struct ar724x_pci_controller {
+ spinlock_t lock;
+
+ struct pci_controller pci_controller;
++ struct resource io_res;
++ struct resource mem_res;
+ };
+
+ static inline bool ar724x_pci_check_link(struct ar724x_pci_controller *apc)
+@@ -190,20 +192,6 @@ static struct pci_ops ar724x_pci_ops = {
+ .write = ar724x_pci_write,
+ };
+
+-static struct resource ar724x_io_resource = {
+- .name = "PCI IO space",
+- .start = 0,
+- .end = 0,
+- .flags = IORESOURCE_IO,
+-};
+-
+-static struct resource ar724x_mem_resource = {
+- .name = "PCI memory space",
+- .start = AR724X_PCI_MEM_BASE,
+- .end = AR724X_PCI_MEM_BASE + AR724X_PCI_MEM_SIZE - 1,
+- .flags = IORESOURCE_MEM,
+-};
+-
+ static void ar724x_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
+ {
+ struct ar724x_pci_controller *apc;
+@@ -331,9 +319,29 @@ static int __devinit ar724x_pci_probe(st
+
+ spin_lock_init(&apc->lock);
+
++ res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base");
++ if (!res)
++ return -EINVAL;
++
++ apc->io_res.parent = res;
++ apc->io_res.name = "PCI IO space";
++ apc->io_res.start = res->start;
++ apc->io_res.end = res->end;
++ apc->io_res.flags = IORESOURCE_IO;
++
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base");
++ if (!res)
++ return -EINVAL;
++
++ apc->mem_res.parent = res;
++ apc->mem_res.name = "PCI memory space";
++ apc->mem_res.start = res->start;
++ apc->mem_res.end = res->end;
++ apc->mem_res.flags = IORESOURCE_MEM;
++
+ apc->pci_controller.pci_ops = &ar724x_pci_ops;
+- apc->pci_controller.io_resource = &ar724x_io_resource;
+- apc->pci_controller.mem_resource = &ar724x_mem_resource;
++ apc->pci_controller.io_resource = &apc->io_res;
++ apc->pci_controller.mem_resource = &apc->mem_res;
+
+ apc->link_up = ar724x_pci_check_link(apc);
+ if (!apc->link_up)
--- /dev/null
+From d258929cd4c8c495f619f0e66d9d1c23f3f9246f Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Tue, 26 Jun 2012 11:59:45 +0200
+Subject: [PATCH 12/34] MIPS: pci-ar724x: use per-controller IRQ base
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/pci/pci-ar724x.c | 31 +++++++++++++++++++++----------
+ 1 files changed, 21 insertions(+), 10 deletions(-)
+
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -34,6 +34,7 @@ struct ar724x_pci_controller {
+ void __iomem *ctrl_base;
+
+ int irq;
++ int irq_base;
+
+ bool link_up;
+ bool bar0_is_cached;
+@@ -205,7 +206,7 @@ static void ar724x_pci_irq_handler(unsig
+ __raw_readl(base + AR724X_PCI_REG_INT_MASK);
+
+ if (pending & AR724X_PCI_INT_DEV0)
+- generic_handle_irq(ATH79_PCI_IRQ(0));
++ generic_handle_irq(apc->irq_base + 0);
+
+ else
+ spurious_interrupt();
+@@ -215,13 +216,15 @@ static void ar724x_pci_irq_unmask(struct
+ {
+ struct ar724x_pci_controller *apc;
+ void __iomem *base;
++ int offset;
+ u32 t;
+
+ apc = irq_data_get_irq_chip_data(d);
+ base = apc->ctrl_base;
++ offset = apc->irq_base - d->irq;
+
+- switch (d->irq) {
+- case ATH79_PCI_IRQ(0):
++ switch (offset) {
++ case 0:
+ t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
+ __raw_writel(t | AR724X_PCI_INT_DEV0,
+ base + AR724X_PCI_REG_INT_MASK);
+@@ -234,13 +237,15 @@ static void ar724x_pci_irq_mask(struct i
+ {
+ struct ar724x_pci_controller *apc;
+ void __iomem *base;
++ int offset;
+ u32 t;
+
+ apc = irq_data_get_irq_chip_data(d);
+ base = apc->ctrl_base;
++ offset = apc->irq_base - d->irq;
+
+- switch (d->irq) {
+- case ATH79_PCI_IRQ(0):
++ switch (offset) {
++ case 0:
+ t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
+ __raw_writel(t & ~AR724X_PCI_INT_DEV0,
+ base + AR724X_PCI_REG_INT_MASK);
+@@ -264,7 +269,8 @@ static struct irq_chip ar724x_pci_irq_ch
+ .irq_mask_ack = ar724x_pci_irq_mask,
+ };
+
+-static void __devinit ar724x_pci_irq_init(struct ar724x_pci_controller *apc)
++static void __devinit ar724x_pci_irq_init(struct ar724x_pci_controller *apc,
++ int id)
+ {
+ void __iomem *base;
+ int i;
+@@ -274,10 +280,10 @@ static void __devinit ar724x_pci_irq_ini
+ __raw_writel(0, base + AR724X_PCI_REG_INT_MASK);
+ __raw_writel(0, base + AR724X_PCI_REG_INT_STATUS);
+
+- BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR724X_PCI_IRQ_COUNT);
++ apc->irq_base = ATH79_PCI_IRQ_BASE + (id * AR724X_PCI_IRQ_COUNT);
+
+- for (i = ATH79_PCI_IRQ_BASE;
+- i < ATH79_PCI_IRQ_BASE + AR724X_PCI_IRQ_COUNT; i++) {
++ for (i = apc->irq_base;
++ i < apc->irq_base + AR724X_PCI_IRQ_COUNT; i++) {
+ irq_set_chip_and_handler(i, &ar724x_pci_irq_chip,
+ handle_level_irq);
+ irq_set_chip_data(i, apc);
+@@ -291,6 +297,11 @@ static int __devinit ar724x_pci_probe(st
+ {
+ struct ar724x_pci_controller *apc;
+ struct resource *res;
++ int id;
++
++ id = pdev->id;
++ if (id == -1)
++ id = 0;
+
+ apc = devm_kzalloc(&pdev->dev, sizeof(struct ar724x_pci_controller),
+ GFP_KERNEL);
+@@ -347,7 +358,7 @@ static int __devinit ar724x_pci_probe(st
+ if (!apc->link_up)
+ dev_warn(&pdev->dev, "PCIe link is down\n");
+
+- ar724x_pci_irq_init(apc);
++ ar724x_pci_irq_init(apc, id);
+
+ register_pci_controller(&apc->pci_controller);
+
--- /dev/null
+From 93824983ceb36d4ce1f4a644031ec6fb5f332f1d Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Tue, 26 Jun 2012 15:14:47 +0200
+Subject: [PATCH 13/34] MIPS: pci-ar724x: setup command register of the PCI controller
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/ath79/pci.c | 10 +++-
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 +
+ arch/mips/pci/pci-ar724x.c | 63 ++++++++++++++++++++++++
+ 3 files changed, 74 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -137,13 +137,14 @@ static struct platform_device *
+ ath79_register_pci_ar724x(int id,
+ unsigned long cfg_base,
+ unsigned long ctrl_base,
++ unsigned long crp_base,
+ unsigned long mem_base,
+ unsigned long mem_size,
+ unsigned long io_base,
+ int irq)
+ {
+ struct platform_device *pdev;
+- struct resource res[5];
++ struct resource res[6];
+
+ memset(res, 0, sizeof(res));
+
+@@ -171,6 +172,11 @@ ath79_register_pci_ar724x(int id,
+ res[4].start = io_base;
+ res[4].end = io_base;
+
++ res[5].name = "crp_base";
++ res[5].flags = IORESOURCE_MEM;
++ res[5].start = crp_base;
++ res[5].end = crp_base + AR724X_PCI_CRP_SIZE - 1;
++
+ pdev = platform_device_register_simple("ar724x-pci", id,
+ res, ARRAY_SIZE(res));
+ return pdev;
+@@ -186,6 +192,7 @@ int __init ath79_register_pci(void)
+ pdev = ath79_register_pci_ar724x(-1,
+ AR724X_PCI_CFG_BASE,
+ AR724X_PCI_CTRL_BASE,
++ AR724X_PCI_CRP_BASE,
+ AR724X_PCI_MEM_BASE,
+ AR724X_PCI_MEM_SIZE,
+ 0,
+@@ -201,6 +208,7 @@ int __init ath79_register_pci(void)
+ pdev = ath79_register_pci_ar724x(-1,
+ AR724X_PCI_CFG_BASE,
+ AR724X_PCI_CTRL_BASE,
++ AR724X_PCI_CRP_BASE,
+ AR724X_PCI_MEM_BASE,
+ AR724X_PCI_MEM_SIZE,
+ 0,
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -67,6 +67,8 @@
+
+ #define AR724X_PCI_CFG_BASE 0x14000000
+ #define AR724X_PCI_CFG_SIZE 0x1000
++#define AR724X_PCI_CRP_BASE (AR71XX_APB_BASE + 0x000c0000)
++#define AR724X_PCI_CRP_SIZE 0x1000
+ #define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000f0000)
+ #define AR724X_PCI_CTRL_SIZE 0x100
+
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -29,9 +29,17 @@
+
+ #define AR7240_BAR0_WAR_VALUE 0xffff
+
++#define AR724X_PCI_CMD_INIT (PCI_COMMAND_MEMORY | \
++ PCI_COMMAND_MASTER | \
++ PCI_COMMAND_INVALIDATE | \
++ PCI_COMMAND_PARITY | \
++ PCI_COMMAND_SERR | \
++ PCI_COMMAND_FAST_BACK)
++
+ struct ar724x_pci_controller {
+ void __iomem *devcfg_base;
+ void __iomem *ctrl_base;
++ void __iomem *crp_base;
+
+ int irq;
+ int irq_base;
+@@ -64,6 +72,51 @@ pci_bus_to_ar724x_controller(struct pci_
+ return container_of(hose, struct ar724x_pci_controller, pci_controller);
+ }
+
++static int ar724x_pci_local_write(struct ar724x_pci_controller *apc,
++ int where, int size, u32 value)
++{
++ unsigned long flags;
++ void __iomem *base;
++ u32 data;
++ int s;
++
++ WARN_ON(where & (size - 1));
++
++ if (!apc->link_up)
++ return PCIBIOS_DEVICE_NOT_FOUND;
++
++ base = apc->crp_base;
++
++ spin_lock_irqsave(&apc->lock, flags);
++ data = __raw_readl(base + (where & ~3));
++
++ switch (size) {
++ case 1:
++ s = ((where & 3) * 8);
++ data &= ~(0xff << s);
++ data |= ((value & 0xff) << s);
++ break;
++ case 2:
++ s = ((where & 2) * 8);
++ data &= ~(0xffff << s);
++ data |= ((value & 0xffff) << s);
++ break;
++ case 4:
++ data = value;
++ break;
++ default:
++ spin_unlock_irqrestore(&apc->lock, flags);
++ return PCIBIOS_BAD_REGISTER_NUMBER;
++ }
++
++ __raw_writel(data, base + (where & ~3));
++ /* flush write */
++ __raw_readl(base + (where & ~3));
++ spin_unlock_irqrestore(&apc->lock, flags);
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
+ static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, uint32_t *value)
+ {
+@@ -324,6 +377,14 @@ static int __devinit ar724x_pci_probe(st
+ if (!apc->devcfg_base)
+ return -EBUSY;
+
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "crp_base");
++ if (!res)
++ return -EINVAL;
++
++ apc->crp_base = devm_request_and_ioremap(&pdev->dev, res);
++ if (apc->crp_base == NULL)
++ return -EBUSY;
++
+ apc->irq = platform_get_irq(pdev, 0);
+ if (apc->irq < 0)
+ return -EINVAL;
+@@ -360,6 +421,8 @@ static int __devinit ar724x_pci_probe(st
+
+ ar724x_pci_irq_init(apc, id);
+
++ ar724x_pci_local_write(apc, PCI_COMMAND, 4, AR724X_PCI_CMD_INIT);
++
+ register_pci_controller(&apc->pci_controller);
+
+ return 0;
--- /dev/null
+From 6c3ef689e4364dca74eaaecd72384be09e5a6bc8 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 25 Jun 2012 09:19:08 +0200
+Subject: [PATCH 14/34] MIPS: pci-ar71xx: use dynamically allocated PCI controller structure
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/pci/pci-ar71xx.c | 84 +++++++++++++++++++++++++++----------------
+ 1 files changed, 53 insertions(+), 31 deletions(-)
+
+--- a/arch/mips/pci/pci-ar71xx.c
++++ b/arch/mips/pci/pci-ar71xx.c
+@@ -20,6 +20,7 @@
+ #include <linux/interrupt.h>
+ #include <linux/module.h>
+ #include <linux/platform_device.h>
++#include <linux/slab.h>
+
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ #include <asm/mach-ath79/ath79.h>
+@@ -48,8 +49,12 @@
+
+ #define AR71XX_PCI_IRQ_COUNT 5
+
+-static DEFINE_SPINLOCK(ar71xx_pci_lock);
+-static void __iomem *ar71xx_pcicfg_base;
++struct ar71xx_pci_controller {
++ void __iomem *cfg_base;
++ spinlock_t lock;
++ int irq;
++ struct pci_controller pci_ctrl;
++};
+
+ /* Byte lane enable bits */
+ static const u8 ar71xx_pci_ble_table[4][4] = {
+@@ -92,9 +97,18 @@ static inline u32 ar71xx_pci_bus_addr(st
+ return ret;
+ }
+
+-static int ar71xx_pci_check_error(int quiet)
++static inline struct ar71xx_pci_controller *
++pci_bus_to_ar71xx_controller(struct pci_bus *bus)
+ {
+- void __iomem *base = ar71xx_pcicfg_base;
++ struct pci_controller *hose;
++
++ hose = (struct pci_controller *) bus->sysdata;
++ return container_of(hose, struct ar71xx_pci_controller, pci_ctrl);
++}
++
++static int ar71xx_pci_check_error(struct ar71xx_pci_controller *apc, int quiet)
++{
++ void __iomem *base = apc->cfg_base;
+ u32 pci_err;
+ u32 ahb_err;
+
+@@ -129,9 +143,10 @@ static int ar71xx_pci_check_error(int qu
+ return !!(ahb_err | pci_err);
+ }
+
+-static inline void ar71xx_pci_local_write(int where, int size, u32 value)
++static inline void ar71xx_pci_local_write(struct ar71xx_pci_controller *apc,
++ int where, int size, u32 value)
+ {
+- void __iomem *base = ar71xx_pcicfg_base;
++ void __iomem *base = apc->cfg_base;
+ u32 ad_cbe;
+
+ value = value << (8 * (where & 3));
+@@ -147,7 +162,8 @@ static inline int ar71xx_pci_set_cfgaddr
+ unsigned int devfn,
+ int where, int size, u32 cmd)
+ {
+- void __iomem *base = ar71xx_pcicfg_base;
++ struct ar71xx_pci_controller *apc = pci_bus_to_ar71xx_controller(bus);
++ void __iomem *base = apc->cfg_base;
+ u32 addr;
+
+ addr = ar71xx_pci_bus_addr(bus, devfn, where);
+@@ -156,13 +172,14 @@ static inline int ar71xx_pci_set_cfgaddr
+ __raw_writel(cmd | ar71xx_pci_get_ble(where, size, 0),
+ base + AR71XX_PCI_REG_CFG_CBE);
+
+- return ar71xx_pci_check_error(1);
++ return ar71xx_pci_check_error(apc, 1);
+ }
+
+ static int ar71xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *value)
+ {
+- void __iomem *base = ar71xx_pcicfg_base;
++ struct ar71xx_pci_controller *apc = pci_bus_to_ar71xx_controller(bus);
++ void __iomem *base = apc->cfg_base;
+ unsigned long flags;
+ u32 data;
+ int err;
+@@ -171,7 +188,7 @@ static int ar71xx_pci_read_config(struct
+ ret = PCIBIOS_SUCCESSFUL;
+ data = ~0;
+
+- spin_lock_irqsave(&ar71xx_pci_lock, flags);
++ spin_lock_irqsave(&apc->lock, flags);
+
+ err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size,
+ AR71XX_PCI_CFG_CMD_READ);
+@@ -180,7 +197,7 @@ static int ar71xx_pci_read_config(struct
+ else
+ data = __raw_readl(base + AR71XX_PCI_REG_CFG_RDDATA);
+
+- spin_unlock_irqrestore(&ar71xx_pci_lock, flags);
++ spin_unlock_irqrestore(&apc->lock, flags);
+
+ *value = (data >> (8 * (where & 3))) & ar71xx_pci_read_mask[size & 7];
+
+@@ -190,7 +207,8 @@ static int ar71xx_pci_read_config(struct
+ static int ar71xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 value)
+ {
+- void __iomem *base = ar71xx_pcicfg_base;
++ struct ar71xx_pci_controller *apc = pci_bus_to_ar71xx_controller(bus);
++ void __iomem *base = apc->cfg_base;
+ unsigned long flags;
+ int err;
+ int ret;
+@@ -198,7 +216,7 @@ static int ar71xx_pci_write_config(struc
+ value = value << (8 * (where & 3));
+ ret = PCIBIOS_SUCCESSFUL;
+
+- spin_lock_irqsave(&ar71xx_pci_lock, flags);
++ spin_lock_irqsave(&apc->lock, flags);
+
+ err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size,
+ AR71XX_PCI_CFG_CMD_WRITE);
+@@ -207,7 +225,7 @@ static int ar71xx_pci_write_config(struc
+ else
+ __raw_writel(value, base + AR71XX_PCI_REG_CFG_WRDATA);
+
+- spin_unlock_irqrestore(&ar71xx_pci_lock, flags);
++ spin_unlock_irqrestore(&apc->lock, flags);
+
+ return ret;
+ }
+@@ -231,12 +249,6 @@ static struct resource ar71xx_pci_mem_re
+ .flags = IORESOURCE_MEM
+ };
+
+-static struct pci_controller ar71xx_pci_controller = {
+- .pci_ops = &ar71xx_pci_ops,
+- .mem_resource = &ar71xx_pci_mem_resource,
+- .io_resource = &ar71xx_pci_io_resource,
+-};
+-
+ static void ar71xx_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
+ {
+ void __iomem *base = ath79_reset_base;
+@@ -294,7 +306,7 @@ static struct irq_chip ar71xx_pci_irq_ch
+ .irq_mask_ack = ar71xx_pci_irq_mask,
+ };
+
+-static __devinit void ar71xx_pci_irq_init(int irq)
++static __devinit void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc)
+ {
+ void __iomem *base = ath79_reset_base;
+ int i;
+@@ -309,7 +321,7 @@ static __devinit void ar71xx_pci_irq_ini
+ irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip,
+ handle_level_irq);
+
+- irq_set_chained_handler(irq, ar71xx_pci_irq_handler);
++ irq_set_chained_handler(apc->irq, ar71xx_pci_irq_handler);
+ }
+
+ static __devinit void ar71xx_pci_reset(void)
+@@ -336,20 +348,26 @@ static __devinit void ar71xx_pci_reset(v
+
+ static int __devinit ar71xx_pci_probe(struct platform_device *pdev)
+ {
++ struct ar71xx_pci_controller *apc;
+ struct resource *res;
+- int irq;
+ u32 t;
+
++ apc = kzalloc(sizeof(struct ar71xx_pci_controller), GFP_KERNEL);
++ if (!apc)
++ return -ENOMEM;
++
++ spin_lock_init(&apc->lock);
++
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg_base");
+ if (!res)
+ return -EINVAL;
+
+- ar71xx_pcicfg_base = devm_request_and_ioremap(&pdev->dev, res);
+- if (!ar71xx_pcicfg_base)
++ apc->cfg_base = devm_request_and_ioremap(&pdev->dev, res);
++ if (!apc->cfg_base)
+ return -ENOMEM;
+
+- irq = platform_get_irq(pdev, 0);
+- if (irq < 0)
++ apc->irq = platform_get_irq(pdev, 0);
++ if (apc->irq < 0)
+ return -EINVAL;
+
+ ar71xx_pci_reset();
+@@ -357,14 +375,18 @@ static int __devinit ar71xx_pci_probe(st
+ /* setup COMMAND register */
+ t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE
+ | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK;
+- ar71xx_pci_local_write(PCI_COMMAND, 4, t);
++ ar71xx_pci_local_write(apc, PCI_COMMAND, 4, t);
+
+ /* clear bus errors */
+- ar71xx_pci_check_error(1);
++ ar71xx_pci_check_error(apc, 1);
++
++ ar71xx_pci_irq_init(apc);
+
+- ar71xx_pci_irq_init(irq);
++ apc->pci_ctrl.pci_ops = &ar71xx_pci_ops;
++ apc->pci_ctrl.mem_resource = &ar71xx_pci_mem_resource;
++ apc->pci_ctrl.io_resource = &ar71xx_pci_io_resource;
+
+- register_pci_controller(&ar71xx_pci_controller);
++ register_pci_controller(&apc->pci_ctrl);
+
+ return 0;
+ }
--- /dev/null
+From 7dc3ccb5dc972b06c41b309653d132beaaedeb37 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 25 Jun 2012 09:52:23 +0200
+Subject: [PATCH 15/34] MIPS: pci-ar71xx: remove static PCI controller resources
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/pci/pci-ar71xx.c | 30 ++++++++++++++----------------
+ 1 files changed, 14 insertions(+), 16 deletions(-)
+
+--- a/arch/mips/pci/pci-ar71xx.c
++++ b/arch/mips/pci/pci-ar71xx.c
+@@ -54,6 +54,8 @@ struct ar71xx_pci_controller {
+ spinlock_t lock;
+ int irq;
+ struct pci_controller pci_ctrl;
++ struct resource io_res;
++ struct resource mem_res;
+ };
+
+ /* Byte lane enable bits */
+@@ -235,20 +237,6 @@ static struct pci_ops ar71xx_pci_ops = {
+ .write = ar71xx_pci_write_config,
+ };
+
+-static struct resource ar71xx_pci_io_resource = {
+- .name = "PCI IO space",
+- .start = 0,
+- .end = 0,
+- .flags = IORESOURCE_IO,
+-};
+-
+-static struct resource ar71xx_pci_mem_resource = {
+- .name = "PCI memory space",
+- .start = AR71XX_PCI_MEM_BASE,
+- .end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1,
+- .flags = IORESOURCE_MEM
+-};
+-
+ static void ar71xx_pci_irq_handler(unsigned int irq, struct irq_desc *desc)
+ {
+ void __iomem *base = ath79_reset_base;
+@@ -370,6 +358,16 @@ static int __devinit ar71xx_pci_probe(st
+ if (apc->irq < 0)
+ return -EINVAL;
+
++ apc->io_res.name = "PCI IO space";
++ apc->io_res.start = 0;
++ apc->io_res.end = 0;
++ apc->io_res.flags = IORESOURCE_IO;
++
++ apc->mem_res.name = "PCI memory space";
++ apc->mem_res.start = AR71XX_PCI_MEM_BASE;
++ apc->mem_res.end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1;
++ apc->mem_res.flags = IORESOURCE_MEM;
++
+ ar71xx_pci_reset();
+
+ /* setup COMMAND register */
+@@ -383,8 +381,8 @@ static int __devinit ar71xx_pci_probe(st
+ ar71xx_pci_irq_init(apc);
+
+ apc->pci_ctrl.pci_ops = &ar71xx_pci_ops;
+- apc->pci_ctrl.mem_resource = &ar71xx_pci_mem_resource;
+- apc->pci_ctrl.io_resource = &ar71xx_pci_io_resource;
++ apc->pci_ctrl.mem_resource = &apc->mem_res;
++ apc->pci_ctrl.io_resource = &apc->io_res;
+
+ register_pci_controller(&apc->pci_ctrl);
+
--- /dev/null
+From 114df1e368b8503de1fe63e97d6eea521eecfbe4 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 24 Jun 2012 13:40:38 +0200
+Subject: [PATCH 16/34] MIPS: ath79: add early printk support for the QCA955X SoCs
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/ath79/early_printk.c | 1 +
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 1 +
+ 2 files changed, 2 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/ath79/early_printk.c
++++ b/arch/mips/ath79/early_printk.c
+@@ -74,6 +74,7 @@ static void prom_putchar_init(void)
+ case REV_ID_MAJOR_AR9341:
+ case REV_ID_MAJOR_AR9342:
+ case REV_ID_MAJOR_AR9344:
++ case REV_ID_MAJOR_QCA9558:
+ _prom_putchar = prom_putchar_ar71xx;
+ break;
+
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -370,6 +370,7 @@
+ #define REV_ID_MAJOR_AR9341 0x0120
+ #define REV_ID_MAJOR_AR9342 0x1120
+ #define REV_ID_MAJOR_AR9344 0x2120
++#define REV_ID_MAJOR_QCA9558 0x1130
+
+ #define AR71XX_REV_ID_MINOR_MASK 0x3
+ #define AR71XX_REV_ID_MINOR_AR7130 0x0
--- /dev/null
+From 3c3c0eccf63b12fea98fd0eb65d0ccf69a7c5a57 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 24 Jun 2012 13:42:16 +0200
+Subject: [PATCH 17/34] MIPS: ath79: add SoC detection code for the QCA9558 SoC
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/ath79/Kconfig | 4 ++++
+ arch/mips/ath79/setup.c | 12 +++++++++++-
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 ++
+ arch/mips/include/asm/mach-ath79/ath79.h | 11 +++++++++++
+ 4 files changed, 28 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -88,6 +88,10 @@ config SOC_AR934X
+ select PCI_AR724X if PCI
+ def_bool n
+
++config SOC_QCA955X
++ select USB_ARCH_HAS_EHCI
++ def_bool n
++
+ config PCI_AR724X
+ def_bool n
+
+--- a/arch/mips/ath79/setup.c
++++ b/arch/mips/ath79/setup.c
+@@ -164,13 +164,23 @@ static void __init ath79_detect_sys_type
+ rev = id & AR934X_REV_ID_REVISION_MASK;
+ break;
+
++ case REV_ID_MAJOR_QCA9558:
++ ath79_soc = ATH79_SOC_QCA9558;
++ chip = "9558";
++ rev = id & AR944X_REV_ID_REVISION_MASK;
++ break;
++
+ default:
+ panic("ath79: unknown SoC, id:0x%08x", id);
+ }
+
+ ath79_soc_rev = rev;
+
+- sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev);
++ if (soc_is_qca955x())
++ sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s rev %u",
++ chip, rev);
++ else
++ sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev);
+ pr_info("SoC: %s\n", ath79_sys_type);
+ }
+
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -391,6 +391,8 @@
+
+ #define AR934X_REV_ID_REVISION_MASK 0xf
+
++#define AR944X_REV_ID_REVISION_MASK 0xf
++
+ /*
+ * SPI block
+ */
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -32,6 +32,7 @@ enum ath79_soc_type {
+ ATH79_SOC_AR9341,
+ ATH79_SOC_AR9342,
+ ATH79_SOC_AR9344,
++ ATH79_SOC_QCA9558,
+ };
+
+ extern enum ath79_soc_type ath79_soc;
+@@ -98,6 +99,16 @@ static inline int soc_is_ar934x(void)
+ return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344();
+ }
+
++static inline int soc_is_qca9558(void)
++{
++ return ath79_soc == ATH79_SOC_QCA9558;
++}
++
++static inline int soc_is_qca955x(void)
++{
++ return soc_is_qca9558();
++}
++
+ extern void __iomem *ath79_ddr_base;
+ extern void __iomem *ath79_pll_base;
+ extern void __iomem *ath79_reset_base;
--- /dev/null
+From f465a16766a015a31d4e83af1ad62cc718d64f5a Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 24 Jun 2012 13:43:08 +0200
+Subject: [PATCH 18/34] MIPS: ath79: add clock setup for the QCA955X SoCs
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/ath79/clock.c | 78 ++++++++++++++++++++++++
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 39 ++++++++++++
+ 2 files changed, 117 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/ath79/clock.c
++++ b/arch/mips/ath79/clock.c
+@@ -295,6 +295,82 @@ static void __init ar934x_clocks_init(vo
+ iounmap(dpll_base);
+ }
+
++static void __init qca955x_clocks_init(void)
++{
++ u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
++ u32 cpu_pll, ddr_pll;
++ u32 bootstrap;
++
++ bootstrap = ath79_reset_rr(QCA955X_RESET_REG_BOOTSTRAP);
++ if (bootstrap & QCA955X_BOOTSTRAP_REF_CLK_40)
++ ath79_ref_clk.rate = 40 * 1000 * 1000;
++ else
++ ath79_ref_clk.rate = 25 * 1000 * 1000;
++
++ pll = ath79_pll_rr(QCA955X_PLL_CPU_CONFIG_REG);
++ out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
++ QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK;
++ ref_div = (pll >> QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
++ QCA955X_PLL_CPU_CONFIG_REFDIV_MASK;
++ nint = (pll >> QCA955X_PLL_CPU_CONFIG_NINT_SHIFT) &
++ QCA955X_PLL_CPU_CONFIG_NINT_MASK;
++ frac = (pll >> QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
++ QCA955X_PLL_CPU_CONFIG_NFRAC_MASK;
++
++ cpu_pll = nint * ath79_ref_clk.rate / ref_div;
++ cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 6));
++ cpu_pll /= (1 << out_div);
++
++ pll = ath79_pll_rr(QCA955X_PLL_DDR_CONFIG_REG);
++ out_div = (pll >> QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
++ QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK;
++ ref_div = (pll >> QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
++ QCA955X_PLL_DDR_CONFIG_REFDIV_MASK;
++ nint = (pll >> QCA955X_PLL_DDR_CONFIG_NINT_SHIFT) &
++ QCA955X_PLL_DDR_CONFIG_NINT_MASK;
++ frac = (pll >> QCA955X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
++ QCA955X_PLL_DDR_CONFIG_NFRAC_MASK;
++
++ ddr_pll = nint * ath79_ref_clk.rate / ref_div;
++ ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (1 << 10));
++ ddr_pll /= (1 << out_div);
++
++ clk_ctrl = ath79_pll_rr(QCA955X_PLL_CLK_CTRL_REG);
++
++ postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
++ QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
++
++ if (clk_ctrl & QCA955X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
++ ath79_cpu_clk.rate = ath79_ref_clk.rate;
++ else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL)
++ ath79_cpu_clk.rate = ddr_pll / (postdiv + 1);
++ else
++ ath79_cpu_clk.rate = cpu_pll / (postdiv + 1);
++
++ postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
++ QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
++
++ if (clk_ctrl & QCA955X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
++ ath79_ddr_clk.rate = ath79_ref_clk.rate;
++ else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL)
++ ath79_ddr_clk.rate = cpu_pll / (postdiv + 1);
++ else
++ ath79_ddr_clk.rate = ddr_pll / (postdiv + 1);
++
++ postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
++ QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
++
++ if (clk_ctrl & QCA955X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
++ ath79_ahb_clk.rate = ath79_ref_clk.rate;
++ else if (clk_ctrl & QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
++ ath79_ahb_clk.rate = ddr_pll / (postdiv + 1);
++ else
++ ath79_ahb_clk.rate = cpu_pll / (postdiv + 1);
++
++ ath79_wdt_clk.rate = ath79_ref_clk.rate;
++ ath79_uart_clk.rate = ath79_ref_clk.rate;
++}
++
+ void __init ath79_clocks_init(void)
+ {
+ if (soc_is_ar71xx())
+@@ -307,6 +383,8 @@ void __init ath79_clocks_init(void)
+ ar933x_clocks_init();
+ else if (soc_is_ar934x())
+ ar934x_clocks_init();
++ else if (soc_is_qca955x())
++ qca955x_clocks_init();
+ else
+ BUG();
+
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -225,6 +225,41 @@
+ #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
+ #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
+
++#define QCA955X_PLL_CPU_CONFIG_REG 0x00
++#define QCA955X_PLL_DDR_CONFIG_REG 0x04
++#define QCA955X_PLL_CLK_CTRL_REG 0x08
++
++#define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
++#define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
++#define QCA955X_PLL_CPU_CONFIG_NINT_SHIFT 6
++#define QCA955X_PLL_CPU_CONFIG_NINT_MASK 0x3f
++#define QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
++#define QCA955X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
++#define QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19
++#define QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3
++
++#define QCA955X_PLL_DDR_CONFIG_NFRAC_SHIFT 0
++#define QCA955X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff
++#define QCA955X_PLL_DDR_CONFIG_NINT_SHIFT 10
++#define QCA955X_PLL_DDR_CONFIG_NINT_MASK 0x3f
++#define QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT 16
++#define QCA955X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f
++#define QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23
++#define QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7
++
++#define QCA955X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2)
++#define QCA955X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3)
++#define QCA955X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4)
++#define QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5
++#define QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f
++#define QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10
++#define QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f
++#define QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15
++#define QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f
++#define QCA955X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20)
++#define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
++#define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
++
+ /*
+ * USB_CONFIG block
+ */
+@@ -264,6 +299,8 @@
+ #define AR934X_RESET_REG_BOOTSTRAP 0xb0
+ #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
+
++#define QCA955X_RESET_REG_BOOTSTRAP 0xb0
++
+ #define MISC_INT_ETHSW BIT(12)
+ #define MISC_INT_TIMER4 BIT(10)
+ #define MISC_INT_TIMER3 BIT(9)
+@@ -341,6 +378,8 @@
+ #define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
+ #define AR934X_BOOTSTRAP_DDR1 BIT(0)
+
++#define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4)
++
+ #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
+ #define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1)
+ #define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2)
--- /dev/null
+From 5d0de52f8e36916485a61b820916b71b5d918e6f Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 24 Jun 2012 13:44:23 +0200
+Subject: [PATCH 19/34] MIPS: ath79: add IRQ handling code for the QCA955X SoCs
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/ath79/irq.c | 110 ++++++++++++++++++++++--
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 32 +++++++
+ arch/mips/include/asm/mach-ath79/irq.h | 9 ++-
+ 3 files changed, 142 insertions(+), 9 deletions(-)
+
+--- a/arch/mips/ath79/irq.c
++++ b/arch/mips/ath79/irq.c
+@@ -130,7 +130,10 @@ static void __init ath79_misc_irq_init(v
+
+ if (soc_is_ar71xx() || soc_is_ar913x())
+ ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
+- else if (soc_is_ar724x() || soc_is_ar933x() || soc_is_ar934x())
++ else if (soc_is_ar724x() ||
++ soc_is_ar933x() ||
++ soc_is_ar934x() ||
++ soc_is_qca955x())
+ ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
+ else
+ BUG();
+@@ -177,6 +180,88 @@ static void ar934x_ip2_irq_init(void)
+ irq_set_chained_handler(ATH79_CPU_IRQ_IP2, ar934x_ip2_irq_dispatch);
+ }
+
++static void qca955x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc)
++{
++ u32 status;
++
++ disable_irq_nosync(irq);
++
++ status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS);
++ status &= QCA955X_EXT_INT_PCIE_RC1_ALL | QCA955X_EXT_INT_WMAC_ALL;
++
++ if (status == 0) {
++ spurious_interrupt();
++ goto enable;
++ }
++
++ if (status & QCA955X_EXT_INT_PCIE_RC1_ALL) {
++ /* TODO: flush DDR? */
++ generic_handle_irq(ATH79_IP2_IRQ(0));
++ }
++
++ if (status & QCA955X_EXT_INT_WMAC_ALL) {
++ /* TODO: flsuh DDR? */
++ generic_handle_irq(ATH79_IP2_IRQ(1));
++ }
++
++enable:
++ enable_irq(irq);
++}
++
++static void qca955x_ip3_irq_dispatch(unsigned int irq, struct irq_desc *desc)
++{
++ u32 status;
++
++ disable_irq_nosync(irq);
++
++ status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS);
++ status &= QCA955X_EXT_INT_PCIE_RC2_ALL |
++ QCA955X_EXT_INT_USB1 |
++ QCA955X_EXT_INT_USB2;
++
++ if (status == 0) {
++ spurious_interrupt();
++ goto enable;
++ }
++
++ if (status & QCA955X_EXT_INT_USB1) {
++ /* TODO: flush DDR? */
++ generic_handle_irq(ATH79_IP3_IRQ(0));
++ }
++
++ if (status & QCA955X_EXT_INT_USB2) {
++ /* TODO: flsuh DDR? */
++ generic_handle_irq(ATH79_IP3_IRQ(1));
++ }
++
++ if (status & QCA955X_EXT_INT_PCIE_RC2_ALL) {
++ /* TODO: flush DDR? */
++ generic_handle_irq(ATH79_IP3_IRQ(2));
++ }
++
++enable:
++ enable_irq(irq);
++}
++
++static void qca955x_irq_init(void)
++{
++ int i;
++
++ for (i = ATH79_IP2_IRQ_BASE;
++ i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
++ irq_set_chip_and_handler(i, &dummy_irq_chip,
++ handle_level_irq);
++
++ irq_set_chained_handler(ATH79_CPU_IRQ_IP2, qca955x_ip2_irq_dispatch);
++
++ for (i = ATH79_IP3_IRQ_BASE;
++ i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
++ irq_set_chip_and_handler(i, &dummy_irq_chip,
++ handle_level_irq);
++
++ irq_set_chained_handler(ATH79_CPU_IRQ_IP3, qca955x_ip3_irq_dispatch);
++}
++
+ asmlinkage void plat_irq_dispatch(void)
+ {
+ unsigned long pending;
+@@ -212,6 +297,17 @@ asmlinkage void plat_irq_dispatch(void)
+ * Issue a flush in the handlers to ensure that the driver sees
+ * the update.
+ */
++
++static void ath79_default_ip2_handler(void)
++{
++ do_IRQ(ATH79_CPU_IRQ_IP2);
++}
++
++static void ath79_default_ip3_handler(void)
++{
++ do_IRQ(ATH79_CPU_IRQ_USB);
++}
++
+ static void ar71xx_ip2_handler(void)
+ {
+ ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_PCI);
+@@ -236,11 +332,6 @@ static void ar933x_ip2_handler(void)
+ do_IRQ(ATH79_CPU_IRQ_IP2);
+ }
+
+-static void ar934x_ip2_handler(void)
+-{
+- do_IRQ(ATH79_CPU_IRQ_IP2);
+-}
+-
+ static void ar71xx_ip3_handler(void)
+ {
+ ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_USB);
+@@ -286,8 +377,11 @@ void __init arch_init_irq(void)
+ ath79_ip2_handler = ar933x_ip2_handler;
+ ath79_ip3_handler = ar933x_ip3_handler;
+ } else if (soc_is_ar934x()) {
+- ath79_ip2_handler = ar934x_ip2_handler;
++ ath79_ip2_handler = ath79_default_ip2_handler;
+ ath79_ip3_handler = ar934x_ip3_handler;
++ } else if (soc_is_qca955x()) {
++ ath79_ip2_handler = ath79_default_ip2_handler;
++ ath79_ip3_handler = ath79_default_ip3_handler;
+ } else {
+ BUG();
+ }
+@@ -298,4 +392,6 @@ void __init arch_init_irq(void)
+
+ if (soc_is_ar934x())
+ ar934x_ip2_irq_init();
++ else if (soc_is_qca955x())
++ qca955x_irq_init();
+ }
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -300,6 +300,7 @@
+ #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
+
+ #define QCA955X_RESET_REG_BOOTSTRAP 0xb0
++#define QCA955X_RESET_REG_EXT_INT_STATUS 0xac
+
+ #define MISC_INT_ETHSW BIT(12)
+ #define MISC_INT_TIMER4 BIT(10)
+@@ -398,6 +399,37 @@
+ AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \
+ AR934X_PCIE_WMAC_INT_PCIE_RC3)
+
++#define QCA955X_EXT_INT_WMAC_MISC BIT(0)
++#define QCA955X_EXT_INT_WMAC_TX BIT(1)
++#define QCA955X_EXT_INT_WMAC_RXLP BIT(2)
++#define QCA955X_EXT_INT_WMAC_RXHP BIT(3)
++#define QCA955X_EXT_INT_PCIE_RC1 BIT(4)
++#define QCA955X_EXT_INT_PCIE_RC1_INT0 BIT(5)
++#define QCA955X_EXT_INT_PCIE_RC1_INT1 BIT(6)
++#define QCA955X_EXT_INT_PCIE_RC1_INT2 BIT(7)
++#define QCA955X_EXT_INT_PCIE_RC1_INT3 BIT(8)
++#define QCA955X_EXT_INT_PCIE_RC2 BIT(12)
++#define QCA955X_EXT_INT_PCIE_RC2_INT0 BIT(13)
++#define QCA955X_EXT_INT_PCIE_RC2_INT1 BIT(14)
++#define QCA955X_EXT_INT_PCIE_RC2_INT2 BIT(15)
++#define QCA955X_EXT_INT_PCIE_RC2_INT3 BIT(16)
++#define QCA955X_EXT_INT_USB1 BIT(24)
++#define QCA955X_EXT_INT_USB2 BIT(28)
++
++#define QCA955X_EXT_INT_WMAC_ALL \
++ (QCA955X_EXT_INT_WMAC_MISC | QCA955X_EXT_INT_WMAC_TX | \
++ QCA955X_EXT_INT_WMAC_RXLP | QCA955X_EXT_INT_WMAC_RXHP)
++
++#define QCA955X_EXT_INT_PCIE_RC1_ALL \
++ (QCA955X_EXT_INT_PCIE_RC1 | QCA955X_EXT_INT_PCIE_RC1_INT0 | \
++ QCA955X_EXT_INT_PCIE_RC1_INT1 | QCA955X_EXT_INT_PCIE_RC1_INT2 | \
++ QCA955X_EXT_INT_PCIE_RC1_INT3)
++
++#define QCA955X_EXT_INT_PCIE_RC2_ALL \
++ (QCA955X_EXT_INT_PCIE_RC2 | QCA955X_EXT_INT_PCIE_RC2_INT0 | \
++ QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \
++ QCA955X_EXT_INT_PCIE_RC2_INT3)
++
+ #define REV_ID_MAJOR_MASK 0xfff0
+ #define REV_ID_MAJOR_AR71XX 0x00a0
+ #define REV_ID_MAJOR_AR913X 0x00b0
+--- a/arch/mips/include/asm/mach-ath79/irq.h
++++ b/arch/mips/include/asm/mach-ath79/irq.h
+@@ -10,7 +10,7 @@
+ #define __ASM_MACH_ATH79_IRQ_H
+
+ #define MIPS_CPU_IRQ_BASE 0
+-#define NR_IRQS 48
++#define NR_IRQS 51
+
+ #define ATH79_MISC_IRQ_BASE 8
+ #define ATH79_MISC_IRQ_COUNT 32
+@@ -23,8 +23,13 @@
+ #define ATH79_IP2_IRQ_COUNT 2
+ #define ATH79_IP2_IRQ(_x) (ATH79_IP2_IRQ_BASE + (_x))
+
++#define ATH79_IP3_IRQ_BASE (ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT)
++#define ATH79_IP3_IRQ_COUNT 3
++#define ATH79_IP3_IRQ(_x) (ATH79_IP3_IRQ_BASE + (_x))
++
+ #define ATH79_CPU_IRQ_IP2 (MIPS_CPU_IRQ_BASE + 2)
+-#define ATH79_CPU_IRQ_USB (MIPS_CPU_IRQ_BASE + 3)
++#define ATH79_CPU_IRQ_IP3 (MIPS_CPU_IRQ_BASE + 3)
++#define ATH79_CPU_IRQ_USB ATH79_CPU_IRQ_IP3
+ #define ATH79_CPU_IRQ_GE0 (MIPS_CPU_IRQ_BASE + 4)
+ #define ATH79_CPU_IRQ_GE1 (MIPS_CPU_IRQ_BASE + 5)
+ #define ATH79_CPU_IRQ_MISC (MIPS_CPU_IRQ_BASE + 6)
--- /dev/null
+From c9a552f3007f0621b2440ae17bad816578299e52 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 24 Jun 2012 13:45:27 +0200
+Subject: [PATCH 20/34] MIPS: ath79: add GPIO setup code for the QCA955X SoCs
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/ath79/gpio.c | 4 +++-
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 1 +
+ 2 files changed, 4 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/ath79/gpio.c
++++ b/arch/mips/ath79/gpio.c
+@@ -198,12 +198,14 @@ void __init ath79_gpio_init(void)
+ ath79_gpio_count = AR933X_GPIO_COUNT;
+ else if (soc_is_ar934x())
+ ath79_gpio_count = AR934X_GPIO_COUNT;
++ else if (soc_is_qca955x())
++ ath79_gpio_count = QCA955X_GPIO_COUNT;
+ else
+ BUG();
+
+ ath79_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
+ ath79_gpio_chip.ngpio = ath79_gpio_count;
+- if (soc_is_ar934x()) {
++ if (soc_is_ar934x() || soc_is_qca955x()) {
+ ath79_gpio_chip.direction_input = ar934x_gpio_direction_input;
+ ath79_gpio_chip.direction_output = ar934x_gpio_direction_output;
+ }
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -507,6 +507,7 @@
+ #define AR913X_GPIO_COUNT 22
+ #define AR933X_GPIO_COUNT 30
+ #define AR934X_GPIO_COUNT 23
++#define QCA955X_GPIO_COUNT 24
+
+ /*
+ * SRIF block
--- /dev/null
+From 68368e80b4db83afe39664a7d43c8b5c7b8ac3b4 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 24 Jun 2012 13:49:33 +0200
+Subject: [PATCH 21/34] MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set,clear}
+
+---
+ arch/mips/ath79/common.c | 6 ++++--
+ 1 files changed, 4 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -70,7 +70,8 @@ void ath79_device_reset_set(u32 mask)
+ reg = AR913X_RESET_REG_RESET_MODULE;
+ else if (soc_is_ar933x())
+ reg = AR933X_RESET_REG_RESET_MODULE;
+- else if (soc_is_ar934x())
++ else if (soc_is_ar934x() ||
++ soc_is_qca955x())
+ reg = AR934X_RESET_REG_RESET_MODULE;
+ else
+ BUG();
+@@ -96,7 +97,8 @@ void ath79_device_reset_clear(u32 mask)
+ reg = AR913X_RESET_REG_RESET_MODULE;
+ else if (soc_is_ar933x())
+ reg = AR933X_RESET_REG_RESET_MODULE;
+- else if (soc_is_ar934x())
++ else if (soc_is_ar934x() ||
++ soc_is_qca955x())
+ reg = AR934X_RESET_REG_RESET_MODULE;
+ else
+ BUG();
--- /dev/null
+From f7d7b362b51c51c1ae80bb7ade2039d6f74d4070 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 24 Jun 2012 13:46:26 +0200
+Subject: [PATCH 22/34] MIPS: ath79: register UART for the QCA955X SoCs
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/ath79/dev-common.c | 3 ++-
+ 1 files changed, 2 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/ath79/dev-common.c
++++ b/arch/mips/ath79/dev-common.c
+@@ -90,7 +90,8 @@ void __init ath79_register_uart(void)
+ if (soc_is_ar71xx() ||
+ soc_is_ar724x() ||
+ soc_is_ar913x() ||
+- soc_is_ar934x()) {
++ soc_is_ar934x() ||
++ soc_is_qca955x()) {
+ ath79_uart_data[0].uartclk = clk_get_rate(clk);
+ platform_device_register(&ath79_uart_device);
+ } else if (soc_is_ar933x()) {
--- /dev/null
+From e4ba5e2bffd1f373f57dd692233aa6b7b46ae76c Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 24 Jun 2012 13:47:35 +0200
+Subject: [PATCH 23/34] MIPS: ath79: add USB controller registration code for the QCA955X SoCs
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/ath79/dev-usb.c | 46 ++++++++++++++++++++++++
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 4 ++
+ 2 files changed, 50 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/ath79/dev-usb.c
++++ b/arch/mips/ath79/dev-usb.c
+@@ -75,6 +75,8 @@ static void __init ath79_usb_init_resour
+ unsigned long size,
+ int irq)
+ {
++ memset(res, 0, sizeof(res));
++
+ res[0].flags = IORESOURCE_MEM;
+ res[0].start = base;
+ res[0].end = base + size - 1;
+@@ -219,6 +221,48 @@ static void __init ar934x_usb_setup(void
+ platform_device_register(&ath79_ehci_device);
+ }
+
++static void __init qca955x_usb_setup(void)
++{
++ struct platform_device *pdev;
++
++ ath79_usb_init_resource(ath79_ehci_resources,
++ QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE,
++ ATH79_IP3_IRQ(0));
++
++ pdev = platform_device_register_resndata(NULL, "ehci-platform", 0,
++ ath79_ehci_resources,
++ ARRAY_SIZE(ath79_ehci_resources),
++ &ath79_ehci_pdata_v2,
++ sizeof(ath79_ehci_pdata_v2));
++ if (IS_ERR(pdev)) {
++ pr_err("Unable to register USB %d device, err=%d\n", 0,
++ (int) PTR_ERR(pdev));
++ return;
++ }
++
++ pdev->dev.dma_mask = &ath79_ehci_dmamask;
++ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
++
++ ath79_usb_init_resource(ath79_ehci_resources,
++ QCA955X_EHCI1_BASE, QCA955X_EHCI_SIZE,
++ ATH79_IP3_IRQ(1));
++
++ pdev = platform_device_register_resndata(NULL, "ehci-platform", 1,
++ ath79_ehci_resources,
++ ARRAY_SIZE(ath79_ehci_resources),
++ &ath79_ehci_pdata_v2,
++ sizeof(ath79_ehci_pdata_v2));
++
++ if (IS_ERR(pdev)) {
++ pr_err("Unable to register USB %d device, err=%d\n", 1,
++ (int) PTR_ERR(pdev));
++ return;
++ }
++
++ pdev->dev.dma_mask = &ath79_ehci_dmamask;
++ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
++}
++
+ void __init ath79_register_usb(void)
+ {
+ if (soc_is_ar71xx())
+@@ -233,6 +277,8 @@ void __init ath79_register_usb(void)
+ ar933x_usb_setup();
+ else if (soc_is_ar934x())
+ ar934x_usb_setup();
++ else if (soc_is_qca955x())
++ qca955x_usb_setup();
+ else
+ BUG();
+ }
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -94,6 +94,10 @@
+ #define AR934X_EHCI_BASE 0x1b000000
+ #define AR934X_EHCI_SIZE 0x200
+
++#define QCA955X_EHCI0_BASE 0x1b000000
++#define QCA955X_EHCI1_BASE 0x1b400000
++#define QCA955X_EHCI_SIZE 0x200
++
+ /*
+ * DDR_CTRL block
+ */
--- /dev/null
+From 0568e7f92ecf2bfd2af0a5c59b1249fef002c89f Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Tue, 3 Jul 2012 10:24:43 +0200
+Subject: [PATCH 24/34] MIPS: ath79: add WMAC registration code for the QCA955X SoCs
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/ath79/Kconfig | 2 +-
+ arch/mips/ath79/dev-wmac.c | 20 ++++++++++++++++++++
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 ++
+ 3 files changed, 23 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -108,7 +108,7 @@ config ATH79_DEV_USB
+ def_bool n
+
+ config ATH79_DEV_WMAC
+- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X)
++ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
+ def_bool n
+
+ endif
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -116,6 +116,24 @@ static void ar934x_wmac_setup(void)
+ ath79_wmac_data.is_clk_25mhz = true;
+ }
+
++static void qca955x_wmac_setup(void)
++{
++ u32 t;
++
++ ath79_wmac_device.name = "qca955x_wmac";
++
++ ath79_wmac_resources[0].start = QCA955X_WMAC_BASE;
++ ath79_wmac_resources[0].end = QCA955X_WMAC_BASE + QCA955X_WMAC_SIZE - 1;
++ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
++ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
++
++ t = ath79_reset_rr(QCA955X_RESET_REG_BOOTSTRAP);
++ if (t & QCA955X_BOOTSTRAP_REF_CLK_40)
++ ath79_wmac_data.is_clk_25mhz = false;
++ else
++ ath79_wmac_data.is_clk_25mhz = true;
++}
++
+ void __init ath79_register_wmac(u8 *cal_data)
+ {
+ if (soc_is_ar913x())
+@@ -124,6 +142,8 @@ void __init ath79_register_wmac(u8 *cal_
+ ar933x_wmac_setup();
+ else if (soc_is_ar934x())
+ ar934x_wmac_setup();
++ else if (soc_is_qca955x())
++ qca955x_wmac_setup();
+ else
+ BUG();
+
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -94,6 +94,8 @@
+ #define AR934X_EHCI_BASE 0x1b000000
+ #define AR934X_EHCI_SIZE 0x200
+
++#define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
++#define QCA955X_WMAC_SIZE 0x20000
+ #define QCA955X_EHCI0_BASE 0x1b000000
+ #define QCA955X_EHCI1_BASE 0x1b400000
+ #define QCA955X_EHCI_SIZE 0x200
--- /dev/null
+From 12c68e4fccadc22a0470177141a57892a76e4a2b Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 24 Jun 2012 15:33:16 +0200
+Subject: [PATCH 25/34] MIPS: ath79: allow to specify bus number in PCI IRQ maps
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/ath79/pci.c | 4 +++-
+ arch/mips/ath79/pci.h | 1 +
+ 2 files changed, 4 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -75,7 +75,9 @@ int __init pcibios_map_irq(const struct
+ const struct ath79_pci_irq *entry;
+
+ entry = &ath79_pci_irq_map[i];
+- if (entry->slot == slot && entry->pin == pin) {
++ if (entry->bus == dev->bus->number &&
++ entry->slot == slot &&
++ entry->pin == pin) {
+ irq = entry->irq;
+ break;
+ }
+--- a/arch/mips/ath79/pci.h
++++ b/arch/mips/ath79/pci.h
+@@ -14,6 +14,7 @@
+ #define _ATH79_PCI_H
+
+ struct ath79_pci_irq {
++ int bus;
+ u8 slot;
+ u8 pin;
+ int irq;
--- /dev/null
+From 8bb54348722216a1dd6905d9d031ebdaa3a544a4 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 24 Jun 2012 23:05:20 +0200
+Subject: [PATCH 26/34] MIPS: ath79: add PCI controller registration code for the QCA9558 SoC
+
+---
+ arch/mips/ath79/Kconfig | 2 +
+ arch/mips/ath79/pci.c | 36 ++++++++++++++++++++++++
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 13 ++++++++
+ 3 files changed, 51 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -90,6 +90,8 @@ config SOC_AR934X
+
+ config SOC_QCA955X
+ select USB_ARCH_HAS_EHCI
++ select HW_HAS_PCI
++ select PCI_AR724X if PCI
+ def_bool n
+
+ config PCI_AR724X
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -49,6 +49,21 @@ static const struct ath79_pci_irq ar724x
+ }
+ };
+
++static const struct ath79_pci_irq qca955x_pci_irq_map[] __initconst = {
++ {
++ .bus = 0,
++ .slot = 0,
++ .pin = 1,
++ .irq = ATH79_PCI_IRQ(0),
++ },
++ {
++ .bus = 1,
++ .slot = 0,
++ .pin = 1,
++ .irq = ATH79_PCI_IRQ(1),
++ },
++};
++
+ int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
+ {
+ int irq = -1;
+@@ -64,6 +79,9 @@ int __init pcibios_map_irq(const struct
+ soc_is_ar9344()) {
+ ath79_pci_irq_map = ar724x_pci_irq_map;
+ ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
++ } else if (soc_is_qca955x()) {
++ ath79_pci_irq_map = qca955x_pci_irq_map;
++ ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map);
+ } else {
+ pr_crit("pci %s: invalid irq map\n",
+ pci_name((struct pci_dev *) dev));
+@@ -215,6 +233,24 @@ int __init ath79_register_pci(void)
+ AR724X_PCI_MEM_SIZE,
+ 0,
+ ATH79_IP2_IRQ(0));
++ } else if (soc_is_qca9558()) {
++ pdev = ath79_register_pci_ar724x(0,
++ QCA955X_PCI_CFG_BASE0,
++ QCA955X_PCI_CTRL_BASE0,
++ QCA955X_PCI_CRP_BASE0,
++ QCA955X_PCI_MEM_BASE0,
++ QCA955X_PCI_MEM_SIZE,
++ 0,
++ ATH79_IP2_IRQ(0));
++
++ pdev = ath79_register_pci_ar724x(1,
++ QCA955X_PCI_CFG_BASE1,
++ QCA955X_PCI_CTRL_BASE1,
++ QCA955X_PCI_CRP_BASE1,
++ QCA955X_PCI_MEM_BASE1,
++ QCA955X_PCI_MEM_SIZE,
++ 1,
++ ATH79_IP3_IRQ(2));
+ } else {
+ /* No PCI support */
+ return -ENODEV;
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -94,6 +94,19 @@
+ #define AR934X_EHCI_BASE 0x1b000000
+ #define AR934X_EHCI_SIZE 0x200
+
++#define QCA955X_PCI_MEM_BASE0 0x10000000
++#define QCA955X_PCI_MEM_BASE1 0x12000000
++#define QCA955X_PCI_MEM_SIZE 0x02000000
++#define QCA955X_PCI_CFG_BASE0 0x14000000
++#define QCA955X_PCI_CFG_BASE1 0x16000000
++#define QCA955X_PCI_CFG_SIZE 0x1000
++#define QCA955X_PCI_CRP_BASE0 (AR71XX_APB_BASE + 0x000c0000)
++#define QCA955X_PCI_CRP_BASE1 (AR71XX_APB_BASE + 0x00250000)
++#define QCA955X_PCI_CRP_SIZE 0x1000
++#define QCA955X_PCI_CTRL_BASE0 (AR71XX_APB_BASE + 0x000f0000)
++#define QCA955X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000)
++#define QCA955X_PCI_CTRL_SIZE 0x100
++
+ #define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
+ #define QCA955X_WMAC_SIZE 0x20000
+ #define QCA955X_EHCI0_BASE 0x1b000000
--- /dev/null
+From a034da3e4d4960266a94d15c811d5f4529fdff44 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Sun, 24 Jun 2012 13:52:23 +0200
+Subject: [PATCH 27/34] MIPS: ath79: add support for the Qualcomm Atheros AP136 board
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/ath79/Kconfig | 12 +++
+ arch/mips/ath79/Makefile | 1 +
+ arch/mips/ath79/mach-ap136.c | 155 ++++++++++++++++++++++++++++++++++++++++++
+ arch/mips/ath79/machtypes.h | 1 +
+ 4 files changed, 169 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/ath79/mach-ap136.c
+
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -14,6 +14,18 @@ config ATH79_MACH_AP121
+ Say 'Y' here if you want your kernel to support the
+ Atheros AP121 reference board.
+
++config ATH79_MACH_AP136
++ bool "Atheros AP136 reference board"
++ select SOC_QCA955X
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_SPI
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++ help
++ Say 'Y' here if you want your kernel to support the
++ Atheros AP136 reference board.
++
+ config ATH79_MACH_AP81
+ bool "Atheros AP81 reference board"
+ select SOC_AR913X
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -27,6 +27,7 @@ obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wma
+ # Machines
+ #
+ obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
++obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o
+ obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
+ obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
+ obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
+--- /dev/null
++++ b/arch/mips/ath79/mach-ap136.c
+@@ -0,0 +1,155 @@
++/*
++ * Qualcomm Atheros AP136 reference board support
++ *
++ * Copyright (c) 2012 Qualcomm Atheros
++ * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ */
++
++#include <linux/pci.h>
++#include <linux/ath9k_platform.h>
++
++#include "machtypes.h"
++#include "dev-gpio-buttons.h"
++#include "dev-leds-gpio.h"
++#include "dev-spi.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
++#include "pci.h"
++
++#define AP136_GPIO_LED_STATUS_RED 14
++#define AP136_GPIO_LED_STATUS_GREEN 19
++#define AP136_GPIO_LED_USB 4
++#define AP136_GPIO_LED_WLAN_2G 13
++#define AP136_GPIO_LED_WLAN_5G 12
++#define AP136_GPIO_LED_WPS_RED 15
++#define AP136_GPIO_LED_WPS_GREEN 20
++
++#define AP136_GPIO_BTN_WPS 16
++#define AP136_GPIO_BTN_RFKILL 21
++
++#define AP136_KEYS_POLL_INTERVAL 20 /* msecs */
++#define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL)
++
++#define AP136_WMAC_CALDATA_OFFSET 0x1000
++#define AP136_PCIE_CALDATA_OFFSET 0x5000
++
++static struct gpio_led ap136_leds_gpio[] __initdata = {
++ {
++ .name = "ap136:green:status",
++ .gpio = AP136_GPIO_LED_STATUS_GREEN,
++ .active_low = 1,
++ },
++ {
++ .name = "ap136:red:status",
++ .gpio = AP136_GPIO_LED_STATUS_RED,
++ .active_low = 1,
++ },
++ {
++ .name = "ap136:green:wps",
++ .gpio = AP136_GPIO_LED_WPS_GREEN,
++ .active_low = 1,
++ },
++ {
++ .name = "ap136:red:wps",
++ .gpio = AP136_GPIO_LED_WPS_RED,
++ .active_low = 1,
++ },
++ {
++ .name = "ap136:red:wlan-2g",
++ .gpio = AP136_GPIO_LED_WLAN_2G,
++ .active_low = 1,
++ },
++ {
++ .name = "ap136:red:usb",
++ .gpio = AP136_GPIO_LED_USB,
++ .active_low = 1,
++ }
++};
++
++static struct gpio_keys_button ap136_gpio_keys[] __initdata = {
++ {
++ .desc = "WPS button",
++ .type = EV_KEY,
++ .code = KEY_WPS_BUTTON,
++ .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
++ .gpio = AP136_GPIO_BTN_WPS,
++ .active_low = 1,
++ },
++ {
++ .desc = "RFKILL button",
++ .type = EV_KEY,
++ .code = KEY_RFKILL,
++ .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
++ .gpio = AP136_GPIO_BTN_RFKILL,
++ .active_low = 1,
++ },
++};
++
++static struct spi_board_info ap136_spi_info[] = {
++ {
++ .bus_num = 0,
++ .chip_select = 0,
++ .max_speed_hz = 25000000,
++ .modalias = "mx25l6405d",
++ }
++};
++
++static struct ath79_spi_platform_data ap136_spi_data = {
++ .bus_num = 0,
++ .num_chipselect = 1,
++};
++
++#ifdef CONFIG_PCI
++static struct ath9k_platform_data ap136_ath9k_data;
++
++static int ap136_pci_plat_dev_init(struct pci_dev *dev)
++{
++ if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
++ dev->dev.platform_data = &ap136_ath9k_data;
++
++ return 0;
++}
++
++static void __init ap136_pci_init(u8 *eeprom)
++{
++ memcpy(ap136_ath9k_data.eeprom_data, eeprom,
++ sizeof(ap136_ath9k_data.eeprom_data));
++
++ ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
++ ath79_register_pci();
++}
++#else
++static inline void ap136_pci_init(void) {}
++#endif /* CONFIG_PCI */
++
++static void __init ap136_setup(void)
++{
++ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
++ ap136_leds_gpio);
++ ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
++ ARRAY_SIZE(ap136_gpio_keys),
++ ap136_gpio_keys);
++ ath79_register_spi(&ap136_spi_data, ap136_spi_info,
++ ARRAY_SIZE(ap136_spi_info));
++ ath79_register_usb();
++ ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
++ ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
++}
++
++MIPS_MACHINE(ATH79_MACH_AP136, "AP136", "Atheros AP136 reference board",
++ ap136_setup);
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -17,6 +17,7 @@
+ enum ath79_mach_type {
+ ATH79_MACH_GENERIC = 0,
+ ATH79_MACH_AP121, /* Atheros AP121 reference board */
++ ATH79_MACH_AP136, /* Atheros AP136 reference board */
+ ATH79_MACH_AP81, /* Atheros AP81 reference board */
+ ATH79_MACH_DB120, /* Atheros DB120 reference board */
+ ATH79_MACH_PB44, /* Atheros PB44 reference board */
--- /dev/null
+From cbb3ade4765bc715b5c2eae4a7b6eaf3ff7ad958 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Wed, 11 Jan 2012 20:06:35 +0100
+Subject: [PATCH 28/34] spi/ath79: add delay between SCK changes
+
+The driver uses the "as fast as it can" approach
+to drive the SCK signal. However this does not
+work with certain low speed SPI chips (e.g. the
+PCF2123 RTC chip). Add per-bit slowdowns in order
+to be able to use the driver with such chips as
+well.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/spi/spi-ath79.c | 44 +++++++++++++++++++++++++++++++++++++++++++-
+ 1 files changed, 43 insertions(+), 1 deletions(-)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -24,17 +24,24 @@
+ #include <linux/spi/spi_bitbang.h>
+ #include <linux/bitops.h>
+ #include <linux/gpio.h>
++#include <linux/clk.h>
++#include <linux/err.h>
+
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ #include <asm/mach-ath79/ath79_spi_platform.h>
+
+ #define DRV_NAME "ath79-spi"
+
++#define ATH79_SPI_RRW_DELAY_FACTOR 12000
++#define MHZ (1000 * 1000)
++
+ struct ath79_spi {
+ struct spi_bitbang bitbang;
+ u32 ioc_base;
+ u32 reg_ctrl;
+ void __iomem *base;
++ struct clk *clk;
++ unsigned rrw_delay;
+ };
+
+ static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg)
+@@ -52,6 +59,12 @@ static inline struct ath79_spi *ath79_sp
+ return spi_master_get_devdata(spi->master);
+ }
+
++static inline void ath79_spi_delay(struct ath79_spi *sp, unsigned nsecs)
++{
++ if (nsecs > sp->rrw_delay)
++ ndelay(nsecs - sp->rrw_delay);
++}
++
+ static void ath79_spi_chipselect(struct spi_device *spi, int is_active)
+ {
+ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+@@ -184,7 +197,9 @@ static u32 ath79_spi_txrx_mode0(struct s
+
+ /* setup MSB (to slave) on trailing edge */
+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out);
++ ath79_spi_delay(sp, nsecs);
+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK);
++ ath79_spi_delay(sp, nsecs);
+
+ word <<= 1;
+ }
+@@ -198,6 +213,7 @@ static __devinit int ath79_spi_probe(str
+ struct ath79_spi *sp;
+ struct ath79_spi_platform_data *pdata;
+ struct resource *r;
++ unsigned long rate;
+ int ret;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(*sp));
+@@ -236,12 +252,36 @@ static __devinit int ath79_spi_probe(str
+ goto err_put_master;
+ }
+
++ sp->clk = clk_get(&pdev->dev, "ahb");
++ if (IS_ERR(sp->clk)) {
++ ret = PTR_ERR(sp->clk);
++ goto err_unmap;
++ }
++
++ ret = clk_enable(sp->clk);
++ if (ret)
++ goto err_clk_put;
++
++ rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ);
++ if (!rate) {
++ ret = -EINVAL;
++ goto err_clk_disable;
++ }
++
++ sp->rrw_delay = ATH79_SPI_RRW_DELAY_FACTOR / rate;
++ dev_dbg(&pdev->dev, "register read/write delay is %u nsecs\n",
++ sp->rrw_delay);
++
+ ret = spi_bitbang_start(&sp->bitbang);
+ if (ret)
+- goto err_unmap;
++ goto err_clk_disable;
+
+ return 0;
+
++err_clk_disable:
++ clk_disable(sp->clk);
++err_clk_put:
++ clk_put(sp->clk);
+ err_unmap:
+ iounmap(sp->base);
+ err_put_master:
+@@ -256,6 +296,8 @@ static __devexit int ath79_spi_remove(st
+ struct ath79_spi *sp = platform_get_drvdata(pdev);
+
+ spi_bitbang_stop(&sp->bitbang);
++ clk_disable(sp->clk);
++ clk_put(sp->clk);
+ iounmap(sp->base);
+ platform_set_drvdata(pdev, NULL);
+ spi_master_put(sp->bitbang.master);
--- /dev/null
+From bcb0fdebc08f828b54d0a2eb74a9d1378701a8e0 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Wed, 11 Jan 2012 20:33:41 +0100
+Subject: [PATCH 29/34] spi/ath79: add missing HIGH->LOW SCK transition
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/spi/spi-ath79.c | 2 ++
+ 1 files changed, 2 insertions(+), 0 deletions(-)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -200,6 +200,8 @@ static u32 ath79_spi_txrx_mode0(struct s
+ ath79_spi_delay(sp, nsecs);
+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK);
+ ath79_spi_delay(sp, nsecs);
++ if (bits == 1)
++ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out);
+
+ word <<= 1;
+ }
--- /dev/null
+From 06752f9b169493cd1323f8337c147ad2dd31025c Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 9 Jan 2012 15:03:28 +0100
+Subject: [PATCH 30/34] spi/ath79: remove superfluous chip select code
+
+The spi_bitbang driver calls the chipselect function
+of the driver from spi_bitbang_setup in order to
+deselect the given SPI chip, so we don't have to
+initialize the CS line here.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/spi/spi-ath79.c | 6 ------
+ 1 files changed, 0 insertions(+), 6 deletions(-)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -128,12 +128,6 @@ static int ath79_spi_setup_cs(struct spi
+ gpio_free(cdata->gpio);
+ return status;
+ }
+- } else {
+- if (spi->mode & SPI_CS_HIGH)
+- sp->ioc_base |= AR71XX_SPI_IOC_CS0;
+- else
+- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
+- ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
+ }
+
+ return 0;
--- /dev/null
+From 6bd876a46b977643f27d2cc63f49e1bc84b78134 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 9 Jan 2012 15:04:21 +0100
+Subject: [PATCH 31/34] spi/ath79: use gpio_request_one
+
+Use gpio_request_one() instead of multiple gpiolib calls.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/spi/spi-ath79.c | 26 +++++++++++++-------------
+ 1 files changed, 13 insertions(+), 13 deletions(-)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -100,6 +100,7 @@ static int ath79_spi_setup_cs(struct spi
+ {
+ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+ struct ath79_spi_controller_data *cdata;
++ int status;
+
+ cdata = spi->controller_data;
+ if (spi->chip_select && !cdata)
+@@ -115,22 +116,21 @@ static int ath79_spi_setup_cs(struct spi
+ /* TODO: setup speed? */
+ ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
+
++ status = 0;
+ if (spi->chip_select) {
+- int status = 0;
++ unsigned long flags;
+
+- status = gpio_request(cdata->gpio, dev_name(&spi->dev));
+- if (status)
+- return status;
+-
+- status = gpio_direction_output(cdata->gpio,
+- spi->mode & SPI_CS_HIGH);
+- if (status) {
+- gpio_free(cdata->gpio);
+- return status;
+- }
++ flags = GPIOF_DIR_OUT;
++ if (spi->mode & SPI_CS_HIGH)
++ flags |= GPIOF_INIT_HIGH;
++ else
++ flags |= GPIOF_INIT_LOW;
++
++ status = gpio_request_one(cdata->gpio, flags,
++ dev_name(&spi->dev));
+ }
+
+- return 0;
++ return status;
+ }
+
+ static void ath79_spi_cleanup_cs(struct spi_device *spi)
--- /dev/null
+From e63ceaa0c4f7be0498cd452981073d3ce8e7d1f5 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 9 Jan 2012 15:00:46 +0100
+Subject: [PATCH 32/34] spi/ath79: avoid multiple initialization of the SPI controller
+
+Currently we are initializing the SPI controller in
+the chip select line function, and that function is
+called once for each SPI device on the bus. If a
+board has multiple SPI devices, the controller will
+be initialized multiple times.
+
+Introduce ath79_spi_{en,dis}able helper functions,
+and call those from probe/response in order to avoid
+the mutliple initialization of the controller.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/spi/spi-ath79.c | 41 ++++++++++++++++++++++++-----------------
+ 1 files changed, 24 insertions(+), 17 deletions(-)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -96,16 +96,8 @@ static void ath79_spi_chipselect(struct
+
+ }
+
+-static int ath79_spi_setup_cs(struct spi_device *spi)
++static void ath79_spi_enable(struct ath79_spi *sp)
+ {
+- struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+- struct ath79_spi_controller_data *cdata;
+- int status;
+-
+- cdata = spi->controller_data;
+- if (spi->chip_select && !cdata)
+- return -EINVAL;
+-
+ /* enable GPIO mode */
+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
+
+@@ -115,6 +107,24 @@ static int ath79_spi_setup_cs(struct spi
+
+ /* TODO: setup speed? */
+ ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
++}
++
++static void ath79_spi_disable(struct ath79_spi *sp)
++{
++ /* restore CTRL register */
++ ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl);
++ /* disable GPIO mode */
++ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
++}
++
++static int ath79_spi_setup_cs(struct spi_device *spi)
++{
++ struct ath79_spi_controller_data *cdata;
++ int status;
++
++ cdata = spi->controller_data;
++ if (spi->chip_select && !cdata)
++ return -EINVAL;
+
+ status = 0;
+ if (spi->chip_select) {
+@@ -135,17 +145,10 @@ static int ath79_spi_setup_cs(struct spi
+
+ static void ath79_spi_cleanup_cs(struct spi_device *spi)
+ {
+- struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+-
+ if (spi->chip_select) {
+ struct ath79_spi_controller_data *cdata = spi->controller_data;
+ gpio_free(cdata->gpio);
+ }
+-
+- /* restore CTRL register */
+- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl);
+- /* disable GPIO mode */
+- ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
+ }
+
+ static int ath79_spi_setup(struct spi_device *spi)
+@@ -268,12 +271,15 @@ static __devinit int ath79_spi_probe(str
+ dev_dbg(&pdev->dev, "register read/write delay is %u nsecs\n",
+ sp->rrw_delay);
+
++ ath79_spi_enable(sp);
+ ret = spi_bitbang_start(&sp->bitbang);
+ if (ret)
+- goto err_clk_disable;
++ goto err_disable;
+
+ return 0;
+
++err_disable:
++ ath79_spi_disable(sp);
+ err_clk_disable:
+ clk_disable(sp->clk);
+ err_clk_put:
+@@ -292,6 +298,7 @@ static __devexit int ath79_spi_remove(st
+ struct ath79_spi *sp = platform_get_drvdata(pdev);
+
+ spi_bitbang_stop(&sp->bitbang);
++ ath79_spi_disable(sp);
+ clk_disable(sp->clk);
+ clk_put(sp->clk);
+ iounmap(sp->base);
--- /dev/null
+From dab305def68a9ea28c1c0ca2fc20bba645944914 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Wed, 11 Jan 2012 22:19:32 +0100
+Subject: [PATCH 33/34] spi/ath79: add shutdown handler
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/spi/spi-ath79.c | 12 +++++++++++-
+ 1 files changed, 11 insertions(+), 1 deletions(-)
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -293,7 +293,7 @@ err_put_master:
+ return ret;
+ }
+
+-static __devexit int ath79_spi_remove(struct platform_device *pdev)
++static void __ath79_spi_remove(struct platform_device *pdev)
+ {
+ struct ath79_spi *sp = platform_get_drvdata(pdev);
+
+@@ -304,13 +304,23 @@ static __devexit int ath79_spi_remove(st
+ iounmap(sp->base);
+ platform_set_drvdata(pdev, NULL);
+ spi_master_put(sp->bitbang.master);
++}
+
++static __devexit int ath79_spi_remove(struct platform_device *pdev)
++{
++ __ath79_spi_remove(pdev);
+ return 0;
+ }
+
++static void ath79_spi_shutdown(struct platform_device *pdev)
++{
++ __ath79_spi_remove(pdev);
++}
++
+ static struct platform_driver ath79_spi_driver = {
+ .probe = ath79_spi_probe,
+ .remove = __devexit_p(ath79_spi_remove),
++ .shutdown = ath79_spi_shutdown,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
--- /dev/null
+From 7008284716403237f6bc7d7590b3ed073555bd56 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Wed, 11 Jan 2012 22:25:11 +0100
+Subject: [PATCH 34/34] spi/ath79: make chipselect logic more flexible
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/ath79/mach-ap121.c | 6 ++
+ arch/mips/ath79/mach-ap136.c | 6 ++
+ arch/mips/ath79/mach-ap81.c | 6 ++
+ arch/mips/ath79/mach-db120.c | 6 ++
+ arch/mips/ath79/mach-pb44.c | 6 ++
+ arch/mips/ath79/mach-ubnt-xm.c | 6 ++
+ .../include/asm/mach-ath79/ath79_spi_platform.h | 8 ++-
+ drivers/spi/spi-ath79.c | 67 +++++++++++++-------
+ 8 files changed, 88 insertions(+), 23 deletions(-)
+
+--- a/arch/mips/ath79/mach-ap121.c
++++ b/arch/mips/ath79/mach-ap121.c
+@@ -58,12 +58,18 @@ static struct gpio_keys_button ap121_gpi
+ }
+ };
+
++static struct ath79_spi_controller_data ap121_spi0_data = {
++ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++ .cs_line = 0,
++};
++
+ static struct spi_board_info ap121_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "mx25l1606e",
++ .controller_data = &ap121_spi0_data,
+ }
+ };
+
+--- a/arch/mips/ath79/mach-ap136.c
++++ b/arch/mips/ath79/mach-ap136.c
+@@ -98,12 +98,18 @@ static struct gpio_keys_button ap136_gpi
+ },
+ };
+
++static struct ath79_spi_controller_data ap136_spi0_data = {
++ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++ .cs_line = 0,
++};
++
+ static struct spi_board_info ap136_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "mx25l6405d",
++ .controller_data = &ap136_spi0_data,
+ }
+ };
+
+--- a/arch/mips/ath79/mach-ap81.c
++++ b/arch/mips/ath79/mach-ap81.c
+@@ -67,12 +67,18 @@ static struct gpio_keys_button ap81_gpio
+ }
+ };
+
++static struct ath79_spi_controller_data ap81_spi0_data = {
++ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++ .cs_line = 0,
++};
++
+ static struct spi_board_info ap81_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p64",
++ .controller_data = &ap81_spi0_data,
+ }
+ };
+
+--- a/arch/mips/ath79/mach-db120.c
++++ b/arch/mips/ath79/mach-db120.c
+@@ -76,12 +76,18 @@ static struct gpio_keys_button db120_gpi
+ },
+ };
+
++static struct ath79_spi_controller_data db120_spi0_data = {
++ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++ .cs_line = 0,
++};
++
+ static struct spi_board_info db120_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "s25sl064a",
++ .controller_data = &db120_spi0_data,
+ }
+ };
+
+--- a/arch/mips/ath79/mach-pb44.c
++++ b/arch/mips/ath79/mach-pb44.c
+@@ -87,12 +87,18 @@ static struct gpio_keys_button pb44_gpio
+ }
+ };
+
++static struct ath79_spi_controller_data pb44_spi0_data = {
++ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++ .cs_line = 0,
++};
++
+ static struct spi_board_info pb44_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p64",
++ .controller_data = &pb44_spi0_data,
+ },
+ };
+
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -65,12 +65,18 @@ static struct gpio_keys_button ubnt_xm_g
+ }
+ };
+
++static struct ath79_spi_controller_data ubnt_xm_spi0_data = {
++ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
++ .cs_line = 0,
++};
++
+ static struct spi_board_info ubnt_xm_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "mx25l6405d",
++ .controller_data = &ubnt_xm_spi0_data,
+ }
+ };
+
+--- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
++++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
+@@ -16,8 +16,14 @@ struct ath79_spi_platform_data {
+ unsigned num_chipselect;
+ };
+
++enum ath79_spi_cs_type {
++ ATH79_SPI_CS_TYPE_INTERNAL,
++ ATH79_SPI_CS_TYPE_GPIO,
++};
++
+ struct ath79_spi_controller_data {
+- unsigned gpio;
++ enum ath79_spi_cs_type cs_type;
++ unsigned cs_line;
+ };
+
+ #endif /* _ATH79_SPI_PLATFORM_H */
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -35,6 +35,8 @@
+ #define ATH79_SPI_RRW_DELAY_FACTOR 12000
+ #define MHZ (1000 * 1000)
+
++#define ATH79_SPI_CS_LINE_MAX 2
++
+ struct ath79_spi {
+ struct spi_bitbang bitbang;
+ u32 ioc_base;
+@@ -69,6 +71,7 @@ static void ath79_spi_chipselect(struct
+ {
+ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+ int cs_high = (spi->mode & SPI_CS_HIGH) ? is_active : !is_active;
++ struct ath79_spi_controller_data *cdata = spi->controller_data;
+
+ if (is_active) {
+ /* set initial clock polarity */
+@@ -80,20 +83,24 @@ static void ath79_spi_chipselect(struct
+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
+ }
+
+- if (spi->chip_select) {
+- struct ath79_spi_controller_data *cdata = spi->controller_data;
+-
+- /* SPI is normally active-low */
+- gpio_set_value(cdata->gpio, cs_high);
+- } else {
++ switch (cdata->cs_type) {
++ case ATH79_SPI_CS_TYPE_INTERNAL:
+ if (cs_high)
+- sp->ioc_base |= AR71XX_SPI_IOC_CS0;
++ sp->ioc_base |= AR71XX_SPI_IOC_CS(cdata->cs_line);
+ else
+- sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
++ sp->ioc_base &= ~AR71XX_SPI_IOC_CS(cdata->cs_line);
+
+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
+- }
++ break;
+
++ case ATH79_SPI_CS_TYPE_GPIO:
++ /* SPI is normally active-low */
++ if (gpio_cansleep(cdata->cs_line))
++ gpio_set_value_cansleep(cdata->cs_line, cs_high);
++ else
++ gpio_set_value(cdata->cs_line, cs_high);
++ break;
++ }
+ }
+
+ static void ath79_spi_enable(struct ath79_spi *sp)
+@@ -120,24 +127,30 @@ static void ath79_spi_disable(struct ath
+ static int ath79_spi_setup_cs(struct spi_device *spi)
+ {
+ struct ath79_spi_controller_data *cdata;
++ unsigned long flags;
+ int status;
+
+ cdata = spi->controller_data;
+- if (spi->chip_select && !cdata)
++ if (!cdata)
+ return -EINVAL;
+
+ status = 0;
+- if (spi->chip_select) {
+- unsigned long flags;
++ switch (cdata->cs_type) {
++ case ATH79_SPI_CS_TYPE_INTERNAL:
++ if (cdata->cs_line > ATH79_SPI_CS_LINE_MAX)
++ status = -EINVAL;
++ break;
+
++ case ATH79_SPI_CS_TYPE_GPIO:
+ flags = GPIOF_DIR_OUT;
+ if (spi->mode & SPI_CS_HIGH)
+ flags |= GPIOF_INIT_HIGH;
+ else
+ flags |= GPIOF_INIT_LOW;
+
+- status = gpio_request_one(cdata->gpio, flags,
++ status = gpio_request_one(cdata->cs_line, flags,
+ dev_name(&spi->dev));
++ break;
+ }
+
+ return status;
+@@ -145,9 +158,19 @@ static int ath79_spi_setup_cs(struct spi
+
+ static void ath79_spi_cleanup_cs(struct spi_device *spi)
+ {
+- if (spi->chip_select) {
+- struct ath79_spi_controller_data *cdata = spi->controller_data;
+- gpio_free(cdata->gpio);
++ struct ath79_spi_controller_data *cdata;
++
++ cdata = spi->controller_data;
++ if (!cdata)
++ return;
++
++ switch (cdata->cs_type) {
++ case ATH79_SPI_CS_TYPE_INTERNAL:
++ /* nothing to do */
++ break;
++ case ATH79_SPI_CS_TYPE_GPIO:
++ gpio_free(cdata->cs_line);
++ break;
+ }
+ }
+
+@@ -155,6 +178,9 @@ static int ath79_spi_setup(struct spi_de
+ {
+ int status = 0;
+
++ if (spi->controller_data == NULL)
++ return -EINVAL;
++
+ if (spi->bits_per_word > 32)
+ return -EINVAL;
+
+@@ -215,6 +241,10 @@ static __devinit int ath79_spi_probe(str
+ unsigned long rate;
+ int ret;
+
++ pdata = pdev->dev.platform_data;
++ if (!pdata)
++ return -EINVAL;
++
+ master = spi_alloc_master(&pdev->dev, sizeof(*sp));
+ if (master == NULL) {
+ dev_err(&pdev->dev, "failed to allocate spi master\n");
+@@ -224,14 +254,10 @@ static __devinit int ath79_spi_probe(str
+ sp = spi_master_get_devdata(master);
+ platform_set_drvdata(pdev, sp);
+
+- pdata = pdev->dev.platform_data;
+-
+ master->setup = ath79_spi_setup;
+ master->cleanup = ath79_spi_cleanup;
+- if (pdata) {
+- master->bus_num = pdata->bus_num;
+- master->num_chipselect = pdata->num_chipselect;
+- }
++ master->bus_num = pdata->bus_num;
++ master->num_chipselect = pdata->num_chipselect;
+
+ sp->bitbang.master = spi_master_get(master);
+ sp->bitbang.chipselect = ath79_spi_chipselect;
--- /dev/null
+--- a/arch/mips/ath79/irq.c
++++ b/arch/mips/ath79/irq.c
+@@ -35,44 +35,17 @@ static void ath79_misc_irq_handler(unsig
+ pending = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS) &
+ __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
+
+- if (pending & MISC_INT_UART)
+- generic_handle_irq(ATH79_MISC_IRQ_UART);
+-
+- else if (pending & MISC_INT_DMA)
+- generic_handle_irq(ATH79_MISC_IRQ_DMA);
+-
+- else if (pending & MISC_INT_PERFC)
+- generic_handle_irq(ATH79_MISC_IRQ_PERFC);
+-
+- else if (pending & MISC_INT_TIMER)
+- generic_handle_irq(ATH79_MISC_IRQ_TIMER);
+-
+- else if (pending & MISC_INT_TIMER2)
+- generic_handle_irq(ATH79_MISC_IRQ_TIMER2);
+-
+- else if (pending & MISC_INT_TIMER3)
+- generic_handle_irq(ATH79_MISC_IRQ_TIMER3);
+-
+- else if (pending & MISC_INT_TIMER4)
+- generic_handle_irq(ATH79_MISC_IRQ_TIMER4);
+-
+- else if (pending & MISC_INT_OHCI)
+- generic_handle_irq(ATH79_MISC_IRQ_OHCI);
+-
+- else if (pending & MISC_INT_ERROR)
+- generic_handle_irq(ATH79_MISC_IRQ_ERROR);
+-
+- else if (pending & MISC_INT_GPIO)
+- generic_handle_irq(ATH79_MISC_IRQ_GPIO);
+-
+- else if (pending & MISC_INT_WDOG)
+- generic_handle_irq(ATH79_MISC_IRQ_WDOG);
++ if (!pending) {
++ spurious_interrupt();
++ return;
++ }
+
+- else if (pending & MISC_INT_ETHSW)
+- generic_handle_irq(ATH79_MISC_IRQ_ETHSW);
++ while (pending) {
++ int bit = __ffs(pending);
+
+- else
+- spurious_interrupt();
++ generic_handle_irq(ATH79_MISC_IRQ(bit));
++ pending &= ~BIT(bit);
++ }
+ }
+
+ static void ar71xx_misc_irq_unmask(struct irq_data *d)
+--- a/arch/mips/include/asm/mach-ath79/irq.h
++++ b/arch/mips/include/asm/mach-ath79/irq.h
+@@ -14,6 +14,7 @@
+
+ #define ATH79_MISC_IRQ_BASE 8
+ #define ATH79_MISC_IRQ_COUNT 32
++#define ATH79_MISC_IRQ(_x) (ATH79_MISC_IRQ_BASE + (_x))
+
+ #define ATH79_PCI_IRQ_BASE (ATH79_MISC_IRQ_BASE + ATH79_MISC_IRQ_COUNT)
+ #define ATH79_PCI_IRQ_COUNT 6
--- /dev/null
+--- a/drivers/tty/serial/ar933x_uart.c
++++ b/drivers/tty/serial/ar933x_uart.c
+@@ -25,11 +25,19 @@
+ #include <linux/io.h>
+ #include <linux/irq.h>
+
++#include <asm/div64.h>
++
+ #include <asm/mach-ath79/ar933x_uart.h>
+ #include <asm/mach-ath79/ar933x_uart_platform.h>
+
+ #define DRIVER_NAME "ar933x-uart"
+
++#define AR933X_UART_MAX_SCALE 0xff
++#define AR933X_UART_MAX_STEP 0xffff
++
++#define AR933X_UART_MIN_BAUD 300
++#define AR933X_UART_MAX_BAUD 3000000
++
+ #define AR933X_DUMMY_STATUS_RD 0x01
+
+ static struct uart_driver ar933x_uart_driver;
+@@ -37,6 +45,8 @@ static struct uart_driver ar933x_uart_dr
+ struct ar933x_uart_port {
+ struct uart_port port;
+ unsigned int ier; /* shadow Interrupt Enable Register */
++ unsigned int min_baud;
++ unsigned int max_baud;
+ };
+
+ static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up,
+@@ -162,6 +172,57 @@ static void ar933x_uart_enable_ms(struct
+ {
+ }
+
++/*
++ * baudrate = (clk / (scale + 1)) * (step * (1 / 2^17))
++ */
++static unsigned long ar933x_uart_get_baud(unsigned int clk,
++ unsigned int scale,
++ unsigned int step)
++{
++ u64 t;
++ u32 div;
++
++ div = (2 << 16) * (scale + 1);
++ t = clk;
++ t *= step;
++ t += (div / 2);
++ do_div(t, div);
++
++ return t;
++}
++
++static void ar933x_uart_get_scale_step(unsigned int clk,
++ unsigned int baud,
++ unsigned int *scale,
++ unsigned int *step)
++{
++ unsigned int tscale;
++ long min_diff;
++
++ *scale = 0;
++ *step = 0;
++
++ min_diff = baud;
++ for (tscale = 0; tscale < AR933X_UART_MAX_SCALE; tscale++) {
++ u64 tstep;
++ int diff;
++
++ tstep = baud * (tscale + 1);
++ tstep *= (2 << 16);
++ do_div(tstep, clk);
++
++ if (tstep > AR933X_UART_MAX_STEP)
++ break;
++
++ diff = abs(ar933x_uart_get_baud(clk, tscale, tstep) - baud);
++ if (diff < min_diff) {
++ min_diff = diff;
++ *scale = tscale;
++ *step = tstep;
++ }
++ }
++}
++
+ static void ar933x_uart_set_termios(struct uart_port *port,
+ struct ktermios *new,
+ struct ktermios *old)
+@@ -169,7 +230,7 @@ static void ar933x_uart_set_termios(stru
+ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
+ unsigned int cs;
+ unsigned long flags;
+- unsigned int baud, scale;
++ unsigned int baud, scale, step;
+
+ /* Only CS8 is supported */
+ new->c_cflag &= ~CSIZE;
+@@ -191,8 +252,8 @@ static void ar933x_uart_set_termios(stru
+ /* Mark/space parity is not supported */
+ new->c_cflag &= ~CMSPAR;
+
+- baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
+- scale = (port->uartclk / (16 * baud)) - 1;
++ baud = uart_get_baud_rate(port, new, old, up->min_baud, up->max_baud);
++ ar933x_uart_get_scale_step(port->uartclk, baud, &scale, &step);
+
+ /*
+ * Ok, we're now changing the port state. Do it with
+@@ -200,6 +261,10 @@ static void ar933x_uart_set_termios(stru
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+
++ /* disable the UART */
++ ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG,
++ AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S);
++
+ /* Update the per-port timeout. */
+ uart_update_timeout(port, new->c_cflag, baud);
+
+@@ -210,7 +275,7 @@ static void ar933x_uart_set_termios(stru
+ up->port.ignore_status_mask |= AR933X_DUMMY_STATUS_RD;
+
+ ar933x_uart_write(up, AR933X_UART_CLOCK_REG,
+- scale << AR933X_UART_CLOCK_SCALE_S | 8192);
++ scale << AR933X_UART_CLOCK_SCALE_S | step);
+
+ /* setup configuration register */
+ ar933x_uart_rmw(up, AR933X_UART_CS_REG, AR933X_UART_CS_PARITY_M, cs);
+@@ -219,6 +284,11 @@ static void ar933x_uart_set_termios(stru
+ ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
+ AR933X_UART_CS_HOST_INT_EN);
+
++ /* reenable the UART */
++ ar933x_uart_rmw(up, AR933X_UART_CS_REG,
++ AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S,
++ AR933X_UART_CS_IF_MODE_DCE << AR933X_UART_CS_IF_MODE_S);
++
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ if (tty_termios_baud_rate(new))
+@@ -401,6 +471,8 @@ static void ar933x_uart_config_port(stru
+ static int ar933x_uart_verify_port(struct uart_port *port,
+ struct serial_struct *ser)
+ {
++ struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
++
+ if (ser->type != PORT_UNKNOWN &&
+ ser->type != PORT_AR933X)
+ return -EINVAL;
+@@ -408,7 +480,8 @@ static int ar933x_uart_verify_port(struc
+ if (ser->irq < 0 || ser->irq >= NR_IRQS)
+ return -EINVAL;
+
+- if (ser->baud_base < 28800)
++ if (ser->baud_base < up->min_baud ||
++ ser->baud_base > up->max_baud)
+ return -EINVAL;
+
+ return 0;
+@@ -561,6 +634,7 @@ static int __devinit ar933x_uart_probe(s
+ struct uart_port *port;
+ struct resource *mem_res;
+ struct resource *irq_res;
++ unsigned int baud;
+ int id;
+ int ret;
+
+@@ -611,6 +685,12 @@ static int __devinit ar933x_uart_probe(s
+ port->fifosize = AR933X_UART_FIFO_SIZE;
+ port->ops = &ar933x_uart_ops;
+
++ baud = ar933x_uart_get_baud(port->uartclk, AR933X_UART_MAX_SCALE, 1);
++ up->min_baud = max_t(unsigned int, baud, AR933X_UART_MIN_BAUD);
++
++ baud = ar933x_uart_get_baud(port->uartclk, 0, AR933X_UART_MAX_STEP);
++ up->max_baud = min_t(unsigned int, baud, AR933X_UART_MAX_BAUD);
++
+ ar933x_uart_add_console_port(up);
+
+ ret = uart_add_one_port(&ar933x_uart_driver, &up->port);
--- /dev/null
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -194,6 +194,9 @@ config LZMA_COMPRESS
+ config LZMA_DECOMPRESS
+ tristate
+
++config RLE_DECOMPRESS
++ tristate
++
+ #
+ # These all provide a common interface (hence the apparent duplication with
+ # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
+--- a/lib/Makefile
++++ b/lib/Makefile
+@@ -85,6 +85,7 @@ obj-$(CONFIG_XZ_DEC) += xz/
+ obj-$(CONFIG_RAID6_PQ) += raid6/
+ obj-$(CONFIG_LZMA_COMPRESS) += lzma/
+ obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/
++obj-$(CONFIG_RLE_DECOMPRESS) += rle.o
+
+ lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
+ lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
+--- /dev/null
++++ b/include/linux/rle.h
+@@ -0,0 +1,8 @@
++#ifndef _RLE_H_
++#define _RLE_H_
++
++int rle_decode(const unsigned char *src, size_t srclen,
++ unsigned char *dst, size_t dstlen,
++ size_t *src_done, size_t *dst_done);
++
++#endif /* _RLE_H_ */
+--- /dev/null
++++ b/lib/rle.c
+@@ -0,0 +1,78 @@
++/*
++ * RLE decoding routine
++ *
++ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/rle.h>
++
++int rle_decode(const unsigned char *src, size_t srclen,
++ unsigned char *dst, size_t dstlen,
++ size_t *src_done, size_t *dst_done)
++{
++ size_t srcpos, dstpos;
++ int ret;
++
++ srcpos = 0;
++ dstpos = 0;
++ ret = -EINVAL;
++
++ /* sanity checks */
++ if (!src || !srclen || !dst || !dstlen)
++ goto out;
++
++ while (1) {
++ char count;
++
++ if (srcpos >= srclen)
++ break;
++
++ count = (char) src[srcpos++];
++ if (count == 0) {
++ ret = 0;
++ break;
++ }
++
++ if (count > 0) {
++ unsigned char c;
++
++ if (srcpos >= srclen)
++ break;
++
++ c = src[srcpos++];
++
++ while (count--) {
++ if (dstpos >= dstlen)
++ break;
++
++ dst[dstpos++] = c;
++ }
++ } else {
++ count *= -1;
++
++ while (count--) {
++ if (srcpos >= srclen)
++ break;
++ if (dstpos >= dstlen)
++ break;
++ dst[dstpos++] = src[srcpos++];
++ }
++ }
++ }
++
++out:
++ if (src_done)
++ *src_done = srcpos;
++ if (dst_done)
++ *dst_done = dstpos;
++
++ return ret;
++}
++
++EXPORT_SYMBOL_GPL(rle_decode);
--- /dev/null
+--- a/drivers/mtd/maps/physmap.c
++++ b/drivers/mtd/maps/physmap.c
+@@ -31,6 +31,66 @@ struct physmap_flash_info {
+ int vpp_refcnt;
+ };
+
++static struct platform_device *physmap_map2pdev(struct map_info *map)
++{
++ return (struct platform_device *) map->map_priv_1;
++}
++
++static void physmap_lock(struct map_info *map)
++{
++ struct platform_device *pdev;
++ struct physmap_flash_data *physmap_data;
++
++ pdev = physmap_map2pdev(map);
++ physmap_data = pdev->dev.platform_data;
++ physmap_data->lock(pdev);
++}
++
++static void physmap_unlock(struct map_info *map)
++{
++ struct platform_device *pdev;
++ struct physmap_flash_data *physmap_data;
++
++ pdev = physmap_map2pdev(map);
++ physmap_data = pdev->dev.platform_data;
++ physmap_data->unlock(pdev);
++}
++
++static map_word physmap_flash_read_lock(struct map_info *map, unsigned long ofs)
++{
++ map_word ret;
++
++ physmap_lock(map);
++ ret = inline_map_read(map, ofs);
++ physmap_unlock(map);
++
++ return ret;
++}
++
++static void physmap_flash_write_lock(struct map_info *map, map_word d,
++ unsigned long ofs)
++{
++ physmap_lock(map);
++ inline_map_write(map, d, ofs);
++ physmap_unlock(map);
++}
++
++static void physmap_flash_copy_from_lock(struct map_info *map, void *to,
++ unsigned long from, ssize_t len)
++{
++ physmap_lock(map);
++ inline_map_copy_from(map, to, from, len);
++ physmap_unlock(map);
++}
++
++static void physmap_flash_copy_to_lock(struct map_info *map, unsigned long to,
++ const void *from, ssize_t len)
++{
++ physmap_lock(map);
++ inline_map_copy_to(map, to, from, len);
++ physmap_unlock(map);
++}
++
+ static int physmap_flash_remove(struct platform_device *dev)
+ {
+ struct physmap_flash_info *info;
+@@ -157,6 +217,13 @@ static int physmap_flash_probe(struct pl
+
+ simple_map_init(&info->map[i]);
+
++ if (physmap_data->lock && physmap_data->unlock) {
++ info->map[i].read = physmap_flash_read_lock;
++ info->map[i].write = physmap_flash_write_lock;
++ info->map[i].copy_from = physmap_flash_copy_from_lock;
++ info->map[i].copy_to = physmap_flash_copy_to_lock;
++ }
++
+ probe_type = rom_probe_types;
+ if (physmap_data->probe_type == NULL) {
+ for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++)
+--- a/include/linux/mtd/physmap.h
++++ b/include/linux/mtd/physmap.h
+@@ -26,6 +26,8 @@ struct physmap_flash_data {
+ unsigned int width;
+ int (*init)(struct platform_device *);
+ void (*exit)(struct platform_device *);
++ void (*lock)(struct platform_device *);
++ void (*unlock)(struct platform_device *);
+ void (*set_vpp)(struct platform_device *, int);
+ unsigned int nr_parts;
+ unsigned int pfow_base;
--- /dev/null
+--- a/drivers/mtd/chips/jedec_probe.c
++++ b/drivers/mtd/chips/jedec_probe.c
+@@ -148,6 +148,7 @@
+ #define SST39LF160 0x2782
+ #define SST39VF1601 0x234b
+ #define SST39VF3201 0x235b
++#define SST39VF6401B 0x236d
+ #define SST39WF1601 0x274b
+ #define SST39WF1602 0x274a
+ #define SST39LF512 0x00D4
+@@ -1568,6 +1569,18 @@ static const struct amd_flash_info jedec
+ ERASEINFO(0x10000,64),
+ }
+ }, {
++ .mfr_id = CFI_MFR_SST,
++ .dev_id = SST39VF6401B,
++ .name = "SST 39VF6401B",
++ .devtypes = CFI_DEVICETYPE_X16,
++ .uaddr = MTD_UADDR_0xAAAA_0x5555,
++ .dev_size = SIZE_8MiB,
++ .cmd_set = P_ID_AMD_STD,
++ .nr_regions = 1,
++ .regions = {
++ ERASEINFO(0x10000,128)
++ }
++ }, {
+ .mfr_id = CFI_MFR_ST,
+ .dev_id = M29F800AB,
+ .name = "ST M29F800AB",
--- /dev/null
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -1221,8 +1221,8 @@ static int __xipram do_write_oneword(str
+ break;
+ }
+
+- if (chip_ready(map, adr))
+- break;
++ if (chip_good(map, adr, datum))
++ goto enable_xip;
+
+ /* Latency issues. Drop the lock, wait a while and retry */
+ UDELAY(map, chip, adr, 1);
+@@ -1238,6 +1238,8 @@ static int __xipram do_write_oneword(str
+
+ ret = -EIO;
+ }
++
++ enable_xip:
+ xip_enable(map, chip, adr);
+ op_done:
+ chip->state = FL_READY;
+@@ -1796,7 +1798,6 @@ static int cfi_amdstd_panic_write(struct
+ return 0;
+ }
+
+-
+ /*
+ * Handle devices with one erase region, that only implement
+ * the chip erase command.
+@@ -1860,8 +1861,8 @@ static int __xipram do_erase_chip(struct
+ chip->erase_suspended = 0;
+ }
+
+- if (chip_ready(map, adr))
+- break;
++ if (chip_good(map, adr, map_word_ff(map)))
++ goto op_done;
+
+ if (time_after(jiffies, timeo)) {
+ printk(KERN_WARNING "MTD %s(): software timeout\n",
+@@ -1881,6 +1882,7 @@ static int __xipram do_erase_chip(struct
+ ret = -EIO;
+ }
+
++ op_done:
+ chip->state = FL_READY;
+ xip_enable(map, chip, adr);
+ DISABLE_VPP(map);
+@@ -1949,9 +1951,9 @@ static int __xipram do_erase_oneblock(st
+ chip->erase_suspended = 0;
+ }
+
+- if (chip_ready(map, adr)) {
++ if (chip_good(map, adr, map_word_ff(map))) {
+ xip_enable(map, chip, adr);
+- break;
++ goto op_done;
+ }
+
+ if (time_after(jiffies, timeo)) {
+@@ -1973,6 +1975,7 @@ static int __xipram do_erase_oneblock(st
+ ret = -EIO;
+ }
+
++ op_done:
+ chip->state = FL_READY;
+ DISABLE_VPP(map);
+ put_chip(map, chip, adr);
--- /dev/null
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -156,6 +156,12 @@ config MTD_BCM63XX_PARTS
+ This provides partions parsing for BCM63xx devices with CFE
+ bootloaders.
+
++config MTD_WRT160NL_PARTS
++ tristate "Linksys WRT160NL partitioning support"
++ depends on MTD_PARTITIONS && ATH79_MACH_WRT160NL
++ ---help---
++ Linksys WRT160NL partitioning support
++
+ config MTD_MYLOADER_PARTS
+ tristate "MyLoader partition parsing"
+ depends on ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX || ATH79
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
+ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
+ obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
++obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
+
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_CHAR) += mtdchar.o
--- /dev/null
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -158,7 +158,7 @@ config MTD_BCM63XX_PARTS
+
+ config MTD_WRT160NL_PARTS
+ tristate "Linksys WRT160NL partitioning support"
+- depends on MTD_PARTITIONS && ATH79_MACH_WRT160NL
++ depends on ATH79_MACH_WRT160NL
+ ---help---
+ Linksys WRT160NL partitioning support
+
+@@ -178,6 +178,12 @@ config MTD_MYLOADER_PARTS
+ You will still need the parsing functions to be called by the driver
+ for your particular device. It won't happen automatically.
+
++config MTD_TPLINK_PARTS
++ tristate "TP-Link AR7XXX/AR9XXX partitioning support"
++ depends on ATH79
++ ---help---
++ TBD.
++
+ comment "User Modules And Translation Layers"
+
+ config MTD_CHAR
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
+ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
+ obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
++obj-$(CONFIG_MTD_TPLINK_PARTS) += tplinkpart.o
+ obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
+
+ # 'Users' - code which presents functionality to userspace.
--- /dev/null
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -100,6 +100,7 @@ struct m25p {
+ u16 addr_width;
+ u8 erase_opcode;
+ u8 *command;
++ size_t max_read_len;
+ };
+
+ static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
+@@ -349,6 +350,7 @@ static int m25p80_read(struct mtd_info *
+ struct m25p *flash = mtd_to_m25p(mtd);
+ struct spi_transfer t[2];
+ struct spi_message m;
++ loff_t ofs;
+
+ pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev),
+ __func__, (u32)from, len);
+@@ -364,19 +366,10 @@ static int m25p80_read(struct mtd_info *
+ t[0].len = m25p_cmdsz(flash) + FAST_READ_DUMMY_BYTE;
+ spi_message_add_tail(&t[0], &m);
+
+- t[1].rx_buf = buf;
+- t[1].len = len;
+ spi_message_add_tail(&t[1], &m);
+
+ mutex_lock(&flash->lock);
+
+- /* Wait till previous write/erase is done. */
+- if (wait_till_ready(flash)) {
+- /* REVISIT status return?? */
+- mutex_unlock(&flash->lock);
+- return 1;
+- }
+-
+ /* FIXME switch to OPCODE_FAST_READ. It's required for higher
+ * clocks; and at this writing, every chip this driver handles
+ * supports that opcode.
+@@ -384,11 +377,44 @@ static int m25p80_read(struct mtd_info *
+
+ /* Set up the write data buffer. */
+ flash->command[0] = OPCODE_READ;
+- m25p_addr2cmd(flash, from, flash->command);
+
+- spi_sync(flash->spi, &m);
++ ofs = 0;
++ while (len) {
++ size_t readlen;
++ size_t done;
++ int ret;
++
++ ret = wait_till_ready(flash);
++ if (ret) {
++ mutex_unlock(&flash->lock);
++ return 1;
++ }
++
++ if (flash->max_read_len > 0 &&
++ flash->max_read_len < len)
++ readlen = flash->max_read_len;
++ else
++ readlen = len;
++
++ t[1].rx_buf = buf + ofs;
++ t[1].len = readlen;
++
++ m25p_addr2cmd(flash, from + ofs, flash->command);
++
++ spi_sync(flash->spi, &m);
+
+- *retlen = m.actual_length - m25p_cmdsz(flash) - FAST_READ_DUMMY_BYTE;
++ done = m.actual_length - m25p_cmdsz(flash) -
++ FAST_READ_DUMMY_BYTE;
++ if (done != readlen) {
++ mutex_unlock(&flash->lock);
++ return 1;
++ }
++
++ ofs += done;
++ len -= done;
++ }
++
++ *retlen = ofs;
+
+ mutex_unlock(&flash->lock);
+
+@@ -899,6 +925,12 @@ static int __devinit m25p_probe(struct s
+ flash->mtd._erase = m25p80_erase;
+ flash->mtd._read = m25p80_read;
+
++ if (data && data->max_read_len) {
++ flash->max_read_len = data->max_read_len;
++ dev_warn(&spi->dev, "max_read_len set to %d bytes\n",
++ flash->max_read_len);
++ }
++
+ /* sst flash chips use AAI word program */
+ if (JEDEC_MFR(info->jedec_id) == CFI_MFR_SST)
+ flash->mtd._write = sst_write;
+--- a/include/linux/spi/flash.h
++++ b/include/linux/spi/flash.h
+@@ -25,6 +25,7 @@ struct flash_platform_data {
+
+ char *type;
+
++ size_t max_read_len;
+ /* we'll likely add more ... use JEDEC IDs, etc */
+ };
+
--- /dev/null
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -992,7 +992,9 @@ static int __devinit m25p_probe(struct s
+ /* partitions should match sector boundaries; and it may be good to
+ * use readonly partitions for writeprotected sectors (BP2..BP0).
+ */
+- return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
++ return mtd_device_parse_register(&flash->mtd,
++ data ? data->part_probes : NULL,
++ &ppdata,
+ data ? data->parts : NULL,
+ data ? data->nr_parts : 0);
+ }
+--- a/include/linux/spi/flash.h
++++ b/include/linux/spi/flash.h
+@@ -24,6 +24,7 @@ struct flash_platform_data {
+ unsigned int nr_parts;
+
+ char *type;
++ const char **part_probes;
+
+ size_t max_read_len;
+ /* we'll likely add more ... use JEDEC IDs, etc */
--- /dev/null
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -79,12 +79,18 @@ static int parse_redboot_partitions(stru
+ static char nullstring[] = "unallocated";
+ #endif
+
++ buf = vmalloc(master->erasesize);
++ if (!buf)
++ return -ENOMEM;
++
++ restart:
+ if ( directory < 0 ) {
+ offset = master->size + directory * master->erasesize;
+ while (mtd_block_isbad(master, offset)) {
+ if (!offset) {
+ nogood:
+ printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
++ vfree(buf);
+ return -EIO;
+ }
+ offset -= master->erasesize;
+@@ -97,10 +103,6 @@ static int parse_redboot_partitions(stru
+ goto nogood;
+ }
+ }
+- buf = vmalloc(master->erasesize);
+-
+- if (!buf)
+- return -ENOMEM;
+
+ printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
+ master->name, offset);
+@@ -173,6 +175,11 @@ static int parse_redboot_partitions(stru
+ }
+ if (i == numslots) {
+ /* Didn't find it */
++ if (offset + master->erasesize < master->size) {
++ /* not at the end of the flash yet, maybe next block :) */
++ directory++;
++ goto restart;
++ }
+ printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
+ master->name);
+ ret = 0;
--- /dev/null
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -607,4 +607,8 @@ config MTD_NAND_FSMC
+ Enables support for NAND Flash chips on the ST Microelectronics
+ Flexible Static Memory Controller (FSMC)
+
++config MTD_NAND_RB4XX
++ tristate "NAND flash driver for RouterBoard 4xx series"
++ depends on MTD_NAND && ATH79_MACH_RB4XX
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27
+ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
+ obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
++obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
+ obj-$(CONFIG_MTD_ALAUDA) += alauda.o
+ obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
--- /dev/null
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -611,4 +611,8 @@ config MTD_NAND_RB4XX
+ tristate "NAND flash driver for RouterBoard 4xx series"
+ depends on MTD_NAND && ATH79_MACH_RB4XX
+
++config MTD_NAND_RB750
++ tristate "NAND flash driver for the RouterBoard 750"
++ depends on MTD_NAND && ATH79_MACH_RB750
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -35,6 +35,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx
+ obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
+ obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
++obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o
+ obj-$(CONFIG_MTD_ALAUDA) += alauda.o
+ obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
--- /dev/null
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -39,7 +39,7 @@
+ #include <linux/mtd/xip.h>
+
+ #define AMD_BOOTLOC_BUG
+-#define FORCE_WORD_WRITE 0
++#define FORCE_WORD_WRITE 1
+
+ #define MAX_WORD_RETRIES 3
+
+@@ -50,7 +50,9 @@
+
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#if !FORCE_WORD_WRITE
+ static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#endif
+ static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
+ static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
+ static void cfi_amdstd_sync (struct mtd_info *);
+@@ -186,6 +188,7 @@ static void fixup_amd_bootblock(struct m
+ }
+ #endif
+
++#if !FORCE_WORD_WRITE
+ static void fixup_use_write_buffers(struct mtd_info *mtd)
+ {
+ struct map_info *map = mtd->priv;
+@@ -195,6 +198,7 @@ static void fixup_use_write_buffers(stru
+ mtd->_write = cfi_amdstd_write_buffers;
+ }
+ }
++#endif /* !FORCE_WORD_WRITE */
+
+ /* Atmel chips don't use the same PRI format as AMD chips */
+ static void fixup_convert_atmel_pri(struct mtd_info *mtd)
+@@ -1378,6 +1382,7 @@ static int cfi_amdstd_write_words(struct
+ /*
+ * FIXME: interleaved mode not tested, and probably not supported!
+ */
++#if !FORCE_WORD_WRITE
+ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
+ unsigned long adr, const u_char *buf,
+ int len)
+@@ -1490,7 +1495,6 @@ static int __xipram do_write_buffer(stru
+ return ret;
+ }
+
+-
+ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+ {
+@@ -1565,6 +1569,7 @@ static int cfi_amdstd_write_buffers(stru
+
+ return 0;
+ }
++#endif /* !FORCE_WORD_WRITE */
+
+ /*
+ * Wait for the flash chip to become ready to write data
--- /dev/null
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -952,6 +952,7 @@ static int __devinit m25p_probe(struct s
+ if (info->flags & M25P_NO_ERASE)
+ flash->mtd.flags |= MTD_NO_ERASE;
+
++ memset(&ppdata, '\0', sizeof(ppdata));
+ ppdata.of_node = spi->dev.of_node;
+ flash->mtd.dev.parent = &spi->dev;
+ flash->page_size = info->page_size;
--- /dev/null
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -615,4 +615,8 @@ config MTD_NAND_RB750
+ tristate "NAND flash driver for the RouterBoard 750"
+ depends on MTD_NAND && ATH79_MACH_RB750
+
++config MTD_NAND_AR934X
++ tristate "NAND flash driver for the Atheros AR934x SoCs"
++ depends on SOC_AR934X
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_SM_COMMON) += sm_comm
+ obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nand.o
+ obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
+ obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
++obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nfc.o
+ obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
+ obj-$(CONFIG_MTD_NAND_DENALI) += denali.o
+ obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
--- /dev/null
+--- a/drivers/net/ethernet/atheros/Kconfig
++++ b/drivers/net/ethernet/atheros/Kconfig
+@@ -5,7 +5,7 @@
+ config NET_VENDOR_ATHEROS
+ bool "Atheros devices"
+ default y
+- depends on PCI
++ depends on (PCI || ATH79)
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+@@ -67,4 +67,6 @@ config ATL1C
+ To compile this driver as a module, choose M here. The module
+ will be called atl1c.
+
++source drivers/net/ethernet/atheros/ag71xx/Kconfig
++
+ endif # NET_VENDOR_ATHEROS
+--- a/drivers/net/ethernet/atheros/Makefile
++++ b/drivers/net/ethernet/atheros/Makefile
+@@ -2,6 +2,7 @@
+ # Makefile for the Atheros network device drivers.
+ #
+
++obj-$(CONFIG_AG71XX) += ag71xx/
+ obj-$(CONFIG_ATL1) += atlx/
+ obj-$(CONFIG_ATL2) += atlx/
+ obj-$(CONFIG_ATL1E) += atl1e/
--- /dev/null
+--- a/net/dsa/tag_trailer.c
++++ b/net/dsa/tag_trailer.c
+@@ -87,7 +87,7 @@ static int trailer_rcv(struct sk_buff *s
+
+ trailer = skb_tail_pointer(skb) - 4;
+ if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
+- (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00)
++ (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00)
+ goto out_drop;
+
+ source_port = trailer[1] & 7;
--- /dev/null
+--- a/drivers/net/dsa/Kconfig
++++ b/drivers/net/dsa/Kconfig
+@@ -12,6 +12,13 @@ config NET_DSA_MV88E6060
+ This enables support for the Marvell 88E6060 ethernet switch
+ chip.
+
++config NET_DSA_MV88E6063
++ bool "Marvell 88E6063 ethernet switch chip support"
++ select NET_DSA_TAG_TRAILER
++ ---help---
++ This enables support for the Marvell 88E6063 ethernet switch
++ chip
++
+ config NET_DSA_MV88E6XXX_NEED_PPU
+ bool
+ default n
+--- a/drivers/net/dsa/Makefile
++++ b/drivers/net/dsa/Makefile
+@@ -1,4 +1,5 @@
+ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
++obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
+ obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx_drv.o
+ mv88e6xxx_drv-y += mv88e6xxx.o
+ ifdef CONFIG_NET_DSA_MV88E6123_61_65
--- /dev/null
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -53,8 +53,8 @@ obj-$(CONFIG_IDE) += ide/
+ obj-$(CONFIG_SCSI) += scsi/
+ obj-$(CONFIG_ATA) += ata/
+ obj-$(CONFIG_TARGET_CORE) += target/
+-obj-$(CONFIG_MTD) += mtd/
+ obj-$(CONFIG_SPI) += spi/
++obj-$(CONFIG_MTD) += mtd/
+ obj-y += hsi/
+ obj-y += net/
+ obj-$(CONFIG_ATM) += atm/
--- /dev/null
+--- a/include/linux/spi/spi.h
++++ b/include/linux/spi/spi.h
+@@ -503,6 +503,8 @@ struct spi_transfer {
+ dma_addr_t rx_dma;
+
+ unsigned cs_change:1;
++ unsigned verify:1;
++ unsigned fast_write:1;
+ u8 bits_per_word;
+ u16 delay_usecs;
+ u32 speed_hz;
+@@ -544,6 +546,7 @@ struct spi_message {
+ struct spi_device *spi;
+
+ unsigned is_dma_mapped:1;
++ unsigned fast_read:1;
+
+ /* REVISIT: we might want a flag affecting the behavior of the
+ * last transfer ... allowing things like "read 16 bit length L"
--- /dev/null
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -309,6 +309,12 @@ config SPI_RSPI
+ help
+ SPI driver for Renesas RSPI blocks.
+
++config SPI_RB4XX
++ tristate "Mikrotik RB4XX SPI master"
++ depends on SPI_MASTER && ATH79_MACH_RB4XX
++ help
++ SPI controller driver for the Mikrotik RB4xx series boards.
++
+ config SPI_S3C24XX
+ tristate "Samsung S3C24XX series SPI"
+ depends on ARCH_S3C24XX && EXPERIMENTAL
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -47,6 +47,7 @@ obj-$(CONFIG_SPI_PL022) += spi-pl022.o
+ obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o
+ obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o
+ obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
++obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
+ obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
+ obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
+ spi-s3c24xx-hw-y := spi-s3c24xx.o
--- /dev/null
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -479,6 +479,13 @@ config SPI_TLE62X0
+ sysfs interface, with each line presented as a kind of GPIO
+ exposing both switch control and diagnostic feedback.
+
++config SPI_RB4XX_CPLD
++ tristate "MikroTik RB4XX CPLD driver"
++ depends on ATH79_MACH_RB4XX
++ help
++ SPI driver for the Xilinx CPLD chip present on the
++ MikroTik RB4xx boards.
++
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -48,6 +48,7 @@ obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.
+ obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o
+ obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
+ obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
++obj-$(CONFIG_SPI_RB4XX_CPLD) += spi-rb4xx-cpld.o
+ obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
+ obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
+ spi-s3c24xx-hw-y := spi-s3c24xx.o
--- /dev/null
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -12,6 +12,7 @@ obj-$(CONFIG_SPI_SPIDEV) += spidev.o
+ # SPI master controller drivers (bus)
+ obj-$(CONFIG_SPI_ALTERA) += spi-altera.o
+ obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o
++obj-$(CONFIG_SPI_AP83) += spi-ap83.o
+ obj-$(CONFIG_SPI_ATH79) += spi-ath79.o
+ obj-$(CONFIG_SPI_AU1550) += spi-au1550.o
+ obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -59,6 +59,14 @@ config SPI_ALTERA
+ help
+ This is the driver for the Altera SPI Controller.
+
++config SPI_AP83
++ tristate "Atheros AP83 specific SPI Controller"
++ depends on SPI_MASTER && ATH79_MACH_AP83
++ select SPI_BITBANG
++ help
++ This is a specific SPI controller driver for the Atheros AP83
++ reference board.
++
+ config SPI_ATH79
+ tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver"
+ depends on ATH79 && GENERIC_GPIO
--- /dev/null
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -494,6 +494,11 @@ config SPI_RB4XX_CPLD
+ SPI driver for the Xilinx CPLD chip present on the
+ MikroTik RB4xx boards.
+
++config SPI_VSC7385
++ tristate "Vitesse VSC7385 ethernet switch driver"
++ help
++ SPI driver for the Vitesse VSC7385 ethernet switch.
++
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -66,6 +66,7 @@ obj-$(CONFIG_SPI_TI_SSP) += spi-ti-ssp.
+ obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x0.o
+ obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
+ obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
++obj-$(CONFIG_SPI_VSC7385) += spi-vsc7385.o
+ obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o
+ obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
+
--- /dev/null
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -453,6 +453,13 @@ config LEDS_TRIGGERS
+ These triggers allow kernel events to drive the LEDs and can
+ be configured via sysfs. If unsure, say Y.
+
++config LEDS_WNDR3700_USB
++ tristate "NETGEAR WNDR3700 USB LED driver"
++ depends on LEDS_CLASS && ATH79_MACH_WNDR3700
++ help
++ This option enables support for the USB LED found on the
++ NETGEAR WNDR3700 board.
++
+ comment "LED Triggers"
+
+ config LEDS_TRIGGER_TIMER
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -37,6 +37,7 @@ obj-$(CONFIG_LEDS_DA9052) += leds-da905
+ obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
+ obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
+ obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
++obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o
+ obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o
+ obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o
+ obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o
--- /dev/null
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -460,6 +460,10 @@ config LEDS_WNDR3700_USB
+ This option enables support for the USB LED found on the
+ NETGEAR WNDR3700 board.
+
++config LEDS_RB750
++ tristate "LED driver for the Mikrotik RouterBOARD 750"
++ depends on LEDS_CLASS && ATH79_MACH_RB750
++
+ comment "LED Triggers"
+
+ config LEDS_TRIGGER_TIMER
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -44,6 +44,7 @@ obj-$(CONFIG_LEDS_LT3593) += leds-lt359
+ obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o
+ obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell-led.o
+ obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
++obj-$(CONFIG_LEDS_RB750) += leds-rb750.o
+ obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
+ obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
+ obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
--- /dev/null
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -618,4 +618,12 @@ config GPIO_MSIC
+ Enable support for GPIO on intel MSIC controllers found in
+ intel MID devices
+
++comment "Other GPIO expanders"
++
++config GPIO_NXP_74HC153
++ tristate "NXP 74HC153 Dual 4-input multiplexer"
++ help
++ Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
++ provides a GPIO interface supporting input mode only.
++
+ endif
--- /dev/null
+--- a/drivers/spi/spi-bitbang.c
++++ b/drivers/spi/spi-bitbang.c
+@@ -234,13 +234,14 @@ void spi_bitbang_cleanup(struct spi_devi
+ }
+ EXPORT_SYMBOL_GPL(spi_bitbang_cleanup);
+
+-static int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
++int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t)
+ {
+ struct spi_bitbang_cs *cs = spi->controller_state;
+ unsigned nsecs = cs->nsecs;
+
+ return cs->txrx_bufs(spi, cs->txrx_word, nsecs, t);
+ }
++EXPORT_SYMBOL_GPL(spi_bitbang_bufs);
+
+ /*----------------------------------------------------------------------*/
+
+--- a/include/linux/spi/spi_bitbang.h
++++ b/include/linux/spi/spi_bitbang.h
+@@ -44,6 +44,7 @@ extern void spi_bitbang_cleanup(struct s
+ extern int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m);
+ extern int spi_bitbang_setup_transfer(struct spi_device *spi,
+ struct spi_transfer *t);
++extern int spi_bitbang_bufs(struct spi_device *spi, struct spi_transfer *t);
+
+ /* start or stop queue processing */
+ extern int spi_bitbang_start(struct spi_bitbang *spi);
--- /dev/null
+--- a/include/linux/spi/spi.h
++++ b/include/linux/spi/spi.h
+@@ -406,6 +406,12 @@ extern struct spi_master *spi_busnum_to_
+
+ /*---------------------------------------------------------------------------*/
+
++enum spi_transfer_type {
++ SPI_TRANSFER_GENERIC = 0,
++ SPI_TRANSFER_FLASH_READ_CMD,
++ SPI_TRANSFER_FLASH_READ_DATA,
++};
++
+ /*
+ * I/O INTERFACE between SPI controller and protocol drivers
+ *
+@@ -508,6 +514,7 @@ struct spi_transfer {
+ u8 bits_per_word;
+ u16 delay_usecs;
+ u32 speed_hz;
++ enum spi_transfer_type type;
+
+ struct list_head transfer_list;
+ };
--- /dev/null
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -362,10 +362,12 @@ static int m25p80_read(struct mtd_info *
+ * OPCODE_FAST_READ (if available) is faster.
+ * Should add 1 byte DUMMY_BYTE.
+ */
++ t[0].type = SPI_TRANSFER_FLASH_READ_CMD;
+ t[0].tx_buf = flash->command;
+ t[0].len = m25p_cmdsz(flash) + FAST_READ_DUMMY_BYTE;
+ spi_message_add_tail(&t[0], &m);
+
++ t[1].type = SPI_TRANSFER_FLASH_READ_DATA;
+ spi_message_add_tail(&t[1], &m);
+
+ mutex_lock(&flash->lock);
--- /dev/null
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -37,6 +37,11 @@
+
+ #define ATH79_SPI_CS_LINE_MAX 2
+
++enum ath79_spi_state {
++ ATH79_SPI_STATE_WAIT_CMD = 0,
++ ATH79_SPI_STATE_WAIT_READ,
++};
++
+ struct ath79_spi {
+ struct spi_bitbang bitbang;
+ u32 ioc_base;
+@@ -44,6 +49,11 @@ struct ath79_spi {
+ void __iomem *base;
+ struct clk *clk;
+ unsigned rrw_delay;
++
++ enum ath79_spi_state state;
++ u32 clk_div;
++ unsigned long read_addr;
++ unsigned long ahb_rate;
+ };
+
+ static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg)
+@@ -111,9 +121,6 @@ static void ath79_spi_enable(struct ath7
+ /* save CTRL register */
+ sp->reg_ctrl = ath79_spi_rr(sp, AR71XX_SPI_REG_CTRL);
+ sp->ioc_base = ath79_spi_rr(sp, AR71XX_SPI_REG_IOC);
+-
+- /* TODO: setup speed? */
+- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
+ }
+
+ static void ath79_spi_disable(struct ath79_spi *sp)
+@@ -232,6 +239,110 @@ static u32 ath79_spi_txrx_mode0(struct s
+ return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS);
+ }
+
++static int ath79_spi_do_read_flash_data(struct spi_device *spi,
++ struct spi_transfer *t)
++{
++ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
++
++ /* disable GPIO mode */
++ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
++
++ memcpy_fromio(t->rx_buf, sp->base + sp->read_addr, t->len);
++
++ /* enable GPIO mode */
++ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
++
++ /* restore IOC register */
++ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
++
++ return t->len;
++}
++
++static int ath79_spi_do_read_flash_cmd(struct spi_device *spi,
++ struct spi_transfer *t)
++{
++ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
++ int len;
++ const u8 *p;
++
++ sp->read_addr = 0;
++
++ len = t->len - 1;
++ p = t->tx_buf;
++
++ while (len--) {
++ p++;
++ sp->read_addr <<= 8;
++ sp->read_addr |= *p;
++ }
++
++ return t->len;
++}
++
++static bool ath79_spi_is_read_cmd(struct spi_device *spi,
++ struct spi_transfer *t)
++{
++ return t->type == SPI_TRANSFER_FLASH_READ_CMD;
++}
++
++static bool ath79_spi_is_data_read(struct spi_device *spi,
++ struct spi_transfer *t)
++{
++ return t->type == SPI_TRANSFER_FLASH_READ_DATA;
++}
++
++static int ath79_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
++{
++ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
++ int ret;
++
++ switch (sp->state) {
++ case ATH79_SPI_STATE_WAIT_CMD:
++ if (ath79_spi_is_read_cmd(spi, t)) {
++ ret = ath79_spi_do_read_flash_cmd(spi, t);
++ sp->state = ATH79_SPI_STATE_WAIT_READ;
++ } else {
++ ret = spi_bitbang_bufs(spi, t);
++ }
++ break;
++
++ case ATH79_SPI_STATE_WAIT_READ:
++ if (ath79_spi_is_data_read(spi, t)) {
++ ret = ath79_spi_do_read_flash_data(spi, t);
++ } else {
++ dev_warn(&spi->dev, "flash data read expected\n");
++ ret = -EIO;
++ }
++ sp->state = ATH79_SPI_STATE_WAIT_CMD;
++ break;
++
++ default:
++ BUG();
++ }
++
++ return ret;
++}
++
++static int ath79_spi_setup_transfer(struct spi_device *spi,
++ struct spi_transfer *t)
++{
++ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
++ struct ath79_spi_controller_data *cdata;
++ int ret;
++
++ ret = spi_bitbang_setup_transfer(spi, t);
++ if (ret)
++ return ret;
++
++ cdata = spi->controller_data;
++ if (cdata->is_flash)
++ sp->bitbang.txrx_bufs = ath79_spi_txrx_bufs;
++ else
++ sp->bitbang.txrx_bufs = spi_bitbang_bufs;
++
++ return ret;
++}
++
+ static __devinit int ath79_spi_probe(struct platform_device *pdev)
+ {
+ struct spi_master *master;
+@@ -254,6 +365,8 @@ static __devinit int ath79_spi_probe(str
+ sp = spi_master_get_devdata(master);
+ platform_set_drvdata(pdev, sp);
+
++ sp->state = ATH79_SPI_STATE_WAIT_CMD;
++
+ master->setup = ath79_spi_setup;
+ master->cleanup = ath79_spi_cleanup;
+ master->bus_num = pdata->bus_num;
+@@ -262,7 +375,7 @@ static __devinit int ath79_spi_probe(str
+ sp->bitbang.master = spi_master_get(master);
+ sp->bitbang.chipselect = ath79_spi_chipselect;
+ sp->bitbang.txrx_word[SPI_MODE_0] = ath79_spi_txrx_mode0;
+- sp->bitbang.setup_transfer = spi_bitbang_setup_transfer;
++ sp->bitbang.setup_transfer = ath79_spi_setup_transfer;
+ sp->bitbang.flags = SPI_CS_HIGH;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+@@ -287,7 +400,8 @@ static __devinit int ath79_spi_probe(str
+ if (ret)
+ goto err_clk_put;
+
+- rate = DIV_ROUND_UP(clk_get_rate(sp->clk), MHZ);
++ sp->ahb_rate = clk_get_rate(sp->clk);
++ rate = DIV_ROUND_UP(sp->ahb_rate, MHZ);
+ if (!rate) {
+ ret = -EINVAL;
+ goto err_clk_disable;
+--- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
++++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
+@@ -24,6 +24,7 @@ enum ath79_spi_cs_type {
+ struct ath79_spi_controller_data {
+ enum ath79_spi_cs_type cs_type;
+ unsigned cs_line;
++ bool is_flash;
+ };
+
+ #endif /* _ATH79_SPI_PLATFORM_H */
--- /dev/null
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ath79/mangle-port.h
+@@ -0,0 +1,37 @@
++/*
++ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h
++ * Copyright (C) 2003, 2004 Ralf Baechle
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H
++#define __ASM_MACH_ATH79_MANGLE_PORT_H
++
++#ifdef CONFIG_PCI
++extern unsigned long (ath79_pci_swizzle_b)(unsigned long port);
++extern unsigned long (ath79_pci_swizzle_w)(unsigned long port);
++#else
++#define ath79_pci_swizzle_b(port) (port)
++#define ath79_pci_swizzle_w(port) (port)
++#endif
++
++#define __swizzle_addr_b(port) ath79_pci_swizzle_b(port)
++#define __swizzle_addr_w(port) ath79_pci_swizzle_w(port)
++#define __swizzle_addr_l(port) (port)
++#define __swizzle_addr_q(port) (port)
++
++# define ioswabb(a, x) (x)
++# define __mem_ioswabb(a, x) (x)
++# define ioswabw(a, x) (x)
++# define __mem_ioswabw(a, x) cpu_to_le16(x)
++# define ioswabl(a, x) (x)
++# define __mem_ioswabl(a, x) cpu_to_le32(x)
++# define ioswabq(a, x) (x)
++# define __mem_ioswabq(a, x) cpu_to_le64(x)
++
++#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -13,6 +13,7 @@
+ */
+
+ #include <linux/init.h>
++#include <linux/export.h>
+ #include <linux/pci.h>
+ #include <linux/resource.h>
+ #include <linux/platform_device.h>
+@@ -25,6 +26,9 @@ static int (*ath79_pci_plat_dev_init)(st
+ static const struct ath79_pci_irq *ath79_pci_irq_map __initdata;
+ static unsigned ath79_pci_nr_irqs __initdata;
+
++static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port);
++static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port);
++
+ static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = {
+ {
+ .slot = 17,
+@@ -202,12 +206,50 @@ ath79_register_pci_ar724x(int id,
+ return pdev;
+ }
+
++static inline bool ar71xx_is_pci_addr(unsigned long port)
++{
++ unsigned long phys = CPHYSADDR(port);
++
++ return (phys >= AR71XX_PCI_MEM_BASE &&
++ phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE);
++}
++
++static unsigned long ar71xx_pci_swizzle_b(unsigned long port)
++{
++ return ar71xx_is_pci_addr(port) ? port ^ 3 : port;
++}
++
++static unsigned long ar71xx_pci_swizzle_w(unsigned long port)
++{
++ return ar71xx_is_pci_addr(port) ? port ^ 2 : port;
++}
++
++unsigned long ath79_pci_swizzle_b(unsigned long port)
++{
++ if (__ath79_pci_swizzle_b)
++ return __ath79_pci_swizzle_b(port);
++
++ return port;
++}
++EXPORT_SYMBOL(ath79_pci_swizzle_b);
++
++unsigned long ath79_pci_swizzle_w(unsigned long port)
++{
++ if (__ath79_pci_swizzle_w)
++ return __ath79_pci_swizzle_w(port);
++
++ return port;
++}
++EXPORT_SYMBOL(ath79_pci_swizzle_w);
++
+ int __init ath79_register_pci(void)
+ {
+ struct platform_device *pdev = NULL;
+
+ if (soc_is_ar71xx()) {
+ pdev = ath79_register_pci_ar71xx();
++ __ath79_pci_swizzle_b = ar71xx_pci_swizzle_b;
++ __ath79_pci_swizzle_w = ar71xx_pci_swizzle_w;
+ } else if (soc_is_ar724x()) {
+ pdev = ath79_register_pci_ar724x(-1,
+ AR724X_PCI_CFG_BASE,
--- /dev/null
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -175,6 +175,7 @@ endif
+ #
+ libs-$(CONFIG_ARC) += arch/mips/fw/arc/
+ libs-$(CONFIG_CFE) += arch/mips/fw/cfe/
++libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/
+ libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/
+ libs-y += arch/mips/fw/lib/
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -998,6 +998,9 @@ config MIPS_NILE4
+ config MIPS_DISABLE_OBSOLETE_IDE
+ bool
+
++config MYLOADER
++ bool
++
+ config SYNC_R4K
+ bool
+
--- /dev/null
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -15,6 +15,7 @@
+ #include <linux/init.h>
+ #include <linux/delay.h>
+ #include <linux/irq.h>
++#include <linux/etherdevice.h>
+ #include <linux/platform_device.h>
+ #include <linux/ath9k_platform.h>
+
+@@ -22,6 +23,7 @@
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ #include "dev-wmac.h"
+
++static u8 ath79_wmac_mac[ETH_ALEN];
+ static struct ath9k_platform_data ath79_wmac_data;
+
+ static struct resource ath79_wmac_resources[] = {
+@@ -134,7 +136,7 @@ static void qca955x_wmac_setup(void)
+ ath79_wmac_data.is_clk_25mhz = true;
+ }
+
+-void __init ath79_register_wmac(u8 *cal_data)
++void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
+ {
+ if (soc_is_ar913x())
+ ar913x_wmac_setup();
+@@ -151,5 +153,10 @@ void __init ath79_register_wmac(u8 *cal_
+ memcpy(ath79_wmac_data.eeprom_data, cal_data,
+ sizeof(ath79_wmac_data.eeprom_data));
+
++ if (mac_addr) {
++ memcpy(ath79_wmac_mac, mac_addr, sizeof(ath79_wmac_mac));
++ ath79_wmac_data.macaddr = ath79_wmac_mac;
++ }
++
+ platform_device_register(&ath79_wmac_device);
+ }
+--- a/arch/mips/ath79/dev-wmac.h
++++ b/arch/mips/ath79/dev-wmac.h
+@@ -12,6 +12,6 @@
+ #ifndef _ATH79_DEV_WMAC_H
+ #define _ATH79_DEV_WMAC_H
+
+-void ath79_register_wmac(u8 *cal_data);
++void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
+
+ #endif /* _ATH79_DEV_WMAC_H */
+--- a/arch/mips/ath79/mach-ap81.c
++++ b/arch/mips/ath79/mach-ap81.c
+@@ -98,7 +98,7 @@ static void __init ap81_setup(void)
+ ap81_gpio_keys);
+ ath79_register_spi(&ap81_spi_data, ap81_spi_info,
+ ARRAY_SIZE(ap81_spi_info));
+- ath79_register_wmac(cal_data);
++ ath79_register_wmac(cal_data, NULL);
+ ath79_register_usb();
+ }
+
+--- a/arch/mips/ath79/mach-db120.c
++++ b/arch/mips/ath79/mach-db120.c
+@@ -134,7 +134,7 @@ static void __init db120_setup(void)
+ ath79_register_spi(&db120_spi_data, db120_spi_info,
+ ARRAY_SIZE(db120_spi_info));
+ ath79_register_usb();
+- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
++ ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
+ db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
+ }
+
+--- a/arch/mips/ath79/mach-ap121.c
++++ b/arch/mips/ath79/mach-ap121.c
+@@ -91,7 +91,7 @@ static void __init ap121_setup(void)
+ ath79_register_spi(&ap121_spi_data, ap121_spi_info,
+ ARRAY_SIZE(ap121_spi_info));
+ ath79_register_usb();
+- ath79_register_wmac(cal_data);
++ ath79_register_wmac(cal_data, NULL);
+ }
+
+ MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
--- /dev/null
+--- a/arch/mips/ath79/gpio.c
++++ b/arch/mips/ath79/gpio.c
+@@ -25,7 +25,9 @@
+ #include <asm/mach-ath79/ath79.h>
+ #include "common.h"
+
+-static void __iomem *ath79_gpio_base;
++void __iomem *ath79_gpio_base;
++EXPORT_SYMBOL_GPL(ath79_gpio_base);
++
+ static unsigned long ath79_gpio_count;
+ static DEFINE_SPINLOCK(ath79_gpio_lock);
+
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -110,6 +110,7 @@ static inline int soc_is_qca955x(void)
+ }
+
+ extern void __iomem *ath79_ddr_base;
++extern void __iomem *ath79_gpio_base;
+ extern void __iomem *ath79_pll_base;
+ extern void __iomem *ath79_reset_base;
+
--- /dev/null
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -22,6 +22,7 @@
+ #include "common.h"
+
+ static DEFINE_SPINLOCK(ath79_device_reset_lock);
++static DEFINE_MUTEX(ath79_flash_mutex);
+
+ u32 ath79_cpu_freq;
+ EXPORT_SYMBOL_GPL(ath79_cpu_freq);
+@@ -109,3 +110,16 @@ void ath79_device_reset_clear(u32 mask)
+ spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
+ }
+ EXPORT_SYMBOL_GPL(ath79_device_reset_clear);
++
++void ath79_flash_acquire(void)
++{
++ mutex_lock(&ath79_flash_mutex);
++}
++EXPORT_SYMBOL_GPL(ath79_flash_acquire);
++
++void ath79_flash_release(void)
++{
++ mutex_unlock(&ath79_flash_mutex);
++}
++EXPORT_SYMBOL_GPL(ath79_flash_release);
++
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -137,4 +137,7 @@ static inline u32 ath79_reset_rr(unsigne
+ void ath79_device_reset_set(u32 mask);
+ void ath79_device_reset_clear(u32 mask);
+
++void ath79_flash_acquire(void);
++void ath79_flash_release(void);
++
+ #endif /* __ASM_MACH_ATH79_H */
--- /dev/null
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -136,6 +136,7 @@ static inline u32 ath79_reset_rr(unsigne
+
+ void ath79_device_reset_set(u32 mask);
+ void ath79_device_reset_clear(u32 mask);
++u32 ath79_device_reset_get(u32 mask);
+
+ void ath79_flash_acquire(void);
+ void ath79_flash_release(void);
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -111,6 +111,32 @@ void ath79_device_reset_clear(u32 mask)
+ }
+ EXPORT_SYMBOL_GPL(ath79_device_reset_clear);
+
++u32 ath79_device_reset_get(u32 mask)
++{
++ unsigned long flags;
++ u32 reg;
++ u32 ret;
++
++ if (soc_is_ar71xx())
++ reg = AR71XX_RESET_REG_RESET_MODULE;
++ else if (soc_is_ar724x())
++ reg = AR724X_RESET_REG_RESET_MODULE;
++ else if (soc_is_ar913x())
++ reg = AR913X_RESET_REG_RESET_MODULE;
++ else if (soc_is_ar933x())
++ reg = AR933X_RESET_REG_RESET_MODULE;
++ else if (soc_is_ar934x())
++ reg = AR934X_RESET_REG_RESET_MODULE;
++ else
++ BUG();
++
++ spin_lock_irqsave(&ath79_device_reset_lock, flags);
++ ret = ath79_reset_rr(reg);
++ spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
++ return ret;
++}
++EXPORT_SYMBOL_GPL(ath79_device_reset_get);
++
+ void ath79_flash_acquire(void)
+ {
+ mutex_lock(&ath79_flash_mutex);
--- /dev/null
+--- a/arch/mips/ath79/common.h
++++ b/arch/mips/ath79/common.h
+@@ -26,6 +26,7 @@ void ath79_ddr_wb_flush(unsigned int reg
+ void ath79_gpio_function_enable(u32 mask);
+ void ath79_gpio_function_disable(u32 mask);
+ void ath79_gpio_function_setup(u32 set, u32 clear);
++void ath79_gpio_output_select(unsigned gpio, u8 val);
+ void ath79_gpio_init(void);
+
+ #endif /* __ATH79_COMMON_H */
+--- a/arch/mips/ath79/gpio.c
++++ b/arch/mips/ath79/gpio.c
+@@ -184,6 +184,34 @@ void ath79_gpio_function_setup(u32 set,
+ spin_unlock_irqrestore(&ath79_gpio_lock, flags);
+ }
+
++void __init ath79_gpio_output_select(unsigned gpio, u8 val)
++{
++ void __iomem *base = ath79_gpio_base;
++ unsigned long flags;
++ unsigned int reg;
++ u32 t, s;
++
++ BUG_ON(!soc_is_ar934x());
++
++ if (gpio >= AR934X_GPIO_COUNT)
++ return;
++
++ reg = AR934X_GPIO_REG_OUT_FUNC0 + 4 * (gpio / 4);
++ s = 8 * (gpio % 4);
++
++ spin_lock_irqsave(&ath79_gpio_lock, flags);
++
++ t = __raw_readl(base + reg);
++ t &= ~(0xff << s);
++ t |= val << s;
++ __raw_writel(t, base + reg);
++
++ /* flush write */
++ (void) __raw_readl(base + reg);
++
++ spin_unlock_irqrestore(&ath79_gpio_lock, flags);
++}
++
+ void __init ath79_gpio_init(void)
+ {
+ int err;
--- /dev/null
+--- a/arch/mips/ath79/prom.c
++++ b/arch/mips/ath79/prom.c
+@@ -19,6 +19,8 @@
+
+ #include "common.h"
+
++static char ath79_cmdline_buf[COMMAND_LINE_SIZE] __initdata;
++
+ static inline int is_valid_ram_addr(void *addr)
+ {
+ if (((u32) addr > KSEG0) &&
+@@ -32,6 +34,41 @@ static inline int is_valid_ram_addr(void
+ return 0;
+ }
+
++static void __init ath79_prom_append_cmdline(const char *name,
++ const char *value)
++{
++ snprintf(ath79_cmdline_buf, sizeof(ath79_cmdline_buf),
++ " %s=%s", name, value);
++ strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline));
++}
++
++static const char * __init ath79_prom_find_env(char **envp, const char *name)
++{
++ const char *ret = NULL;
++ int len;
++ char **p;
++
++ if (!is_valid_ram_addr(envp))
++ return NULL;
++
++ len = strlen(name);
++ for (p = envp; is_valid_ram_addr(*p); p++) {
++ if (strncmp(name, *p, len) == 0 && (*p)[len] == '=') {
++ ret = *p + len + 1;
++ break;
++ }
++
++ /* RedBoot env comes in pointer pairs - key, value */
++ if (strncmp(name, *p, len) == 0 && (*p)[len] == 0)
++ if (is_valid_ram_addr(*(++p))) {
++ ret = *p;
++ break;
++ }
++ }
++
++ return ret;
++}
++
+ static __init void ath79_prom_init_cmdline(int argc, char **argv)
+ {
+ int i;
+@@ -48,7 +85,32 @@ static __init void ath79_prom_init_cmdli
+
+ void __init prom_init(void)
+ {
++ const char *env;
++ char **envp;
++
+ ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1);
++
++ envp = (char **)fw_arg2;
++ if (!strstr(arcs_cmdline, "ethaddr=")) {
++ env = ath79_prom_find_env(envp, "ethaddr");
++ if (env)
++ ath79_prom_append_cmdline("ethaddr", env);
++ }
++
++ if (!strstr(arcs_cmdline, "board=")) {
++ env = ath79_prom_find_env(envp, "board");
++ if (env) {
++ /* Workaround for buggy bootloaders */
++ if (strcmp(env, "RouterStation") == 0 ||
++ strcmp(env, "Ubiquiti AR71xx-based board") == 0)
++ env = "UBNT-RS";
++
++ if (strcmp(env, "RouterStation PRO") == 0)
++ env = "UBNT-RSPRO";
++
++ ath79_prom_append_cmdline("board", env);
++ }
++ }
+ }
+
+ void __init prom_free_prom_memory(void)
--- /dev/null
+--- a/arch/mips/ath79/prom.c
++++ b/arch/mips/ath79/prom.c
+@@ -16,6 +16,7 @@
+
+ #include <asm/bootinfo.h>
+ #include <asm/addrspace.h>
++#include <asm/fw/myloader/myloader.h>
+
+ #include "common.h"
+
+@@ -69,6 +70,37 @@ static const char * __init ath79_prom_fi
+ return ret;
+ }
+
++static int __init ath79_prom_init_myloader(void)
++{
++ struct myloader_info *mylo;
++ char mac_buf[32];
++ unsigned char *mac;
++
++ mylo = myloader_get_info();
++ if (!mylo)
++ return 0;
++
++ switch (mylo->did) {
++ case DEVID_COMPEX_WP543:
++ ath79_prom_append_cmdline("board", "WP543");
++ break;
++ case DEVID_COMPEX_WPE72:
++ ath79_prom_append_cmdline("board", "WPE72");
++ break;
++ default:
++ pr_warn("prom: unknown device id: %x\n", mylo->did);
++ return 0;
++ }
++
++ mac = mylo->macs[0];
++ snprintf(mac_buf, sizeof(mac_buf), "%02x:%02x:%02x:%02x:%02x:%02x",
++ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
++
++ ath79_prom_append_cmdline("ethaddr", mac_buf);
++
++ return 1;
++}
++
+ static __init void ath79_prom_init_cmdline(int argc, char **argv)
+ {
+ int i;
+@@ -88,6 +120,9 @@ void __init prom_init(void)
+ const char *env;
+ char **envp;
+
++ if (ath79_prom_init_myloader())
++ return;
++
+ ath79_prom_init_cmdline(fw_arg0, (char **)fw_arg1);
+
+ envp = (char **)fw_arg2;
--- /dev/null
+--- a/arch/mips/ath79/prom.c
++++ b/arch/mips/ath79/prom.c
+@@ -70,6 +70,35 @@ static const char * __init ath79_prom_fi
+ return ret;
+ }
+
++#ifdef CONFIG_IMAGE_CMDLINE_HACK
++extern char __image_cmdline[];
++
++static int __init ath79_use_image_cmdline(void)
++{
++ char *p = __image_cmdline;
++ int replace = 0;
++
++ if (*p == '-') {
++ replace = 1;
++ p++;
++ }
++
++ if (*p == '\0')
++ return 0;
++
++ if (replace) {
++ strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline));
++ } else {
++ strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
++ strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
++ }
++
++ return 1;
++}
++#else
++static inline int ath79_use_image_cmdline(void) { return 0; }
++#endif
++
+ static int __init ath79_prom_init_myloader(void)
+ {
+ struct myloader_info *mylo;
+@@ -98,6 +127,8 @@ static int __init ath79_prom_init_myload
+
+ ath79_prom_append_cmdline("ethaddr", mac_buf);
+
++ ath79_use_image_cmdline();
++
+ return 1;
+ }
+
+@@ -105,6 +136,9 @@ static __init void ath79_prom_init_cmdli
+ {
+ int i;
+
++ if (ath79_use_image_cmdline())
++ return;
++
+ if (!is_valid_ram_addr(argv))
+ return;
+
--- /dev/null
+--- a/arch/mips/ath79/setup.c
++++ b/arch/mips/ath79/setup.c
+@@ -225,6 +225,8 @@ void __init plat_time_init(void)
+ mips_hpt_frequency = clk_get_rate(clk) / 2;
+ }
+
++__setup("board=", mips_machtype_setup);
++
+ static int __init ath79_setup(void)
+ {
+ ath79_gpio_init();
--- /dev/null
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -24,7 +24,10 @@
+ #include "dev-wmac.h"
+
+ static u8 ath79_wmac_mac[ETH_ALEN];
+-static struct ath9k_platform_data ath79_wmac_data;
++
++static struct ath9k_platform_data ath79_wmac_data = {
++ .led_pin = -1,
++};
+
+ static struct resource ath79_wmac_resources[] = {
+ {
--- /dev/null
+--- a/arch/mips/ath79/dev-usb.c
++++ b/arch/mips/ath79/dev-usb.c
+@@ -15,6 +15,7 @@
+ #include <linux/init.h>
+ #include <linux/delay.h>
+ #include <linux/irq.h>
++#include <linux/gpio.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/platform_device.h>
+ #include <linux/usb/ehci_pdriver.h>
+@@ -282,3 +283,26 @@ void __init ath79_register_usb(void)
+ else
+ BUG();
+ }
++
++void __init ath79_set_usb_power_gpio(unsigned int gpio, unsigned long flags,
++ const char *label)
++{
++ int err;
++
++ err = gpio_request_one(gpio, flags, label);
++ if (err) {
++ pr_err("ath79: can't setup GPIO%u (%s), err=%d\n",
++ gpio, label, err);
++ return;
++ }
++
++ err = gpio_export(gpio, false);
++ if (err) {
++ pr_err("ath79: can't export GPIO%u (%s), err=%d\n",
++ gpio, label, err);
++ }
++
++ return;
++}
++
++
+--- a/arch/mips/ath79/dev-usb.h
++++ b/arch/mips/ath79/dev-usb.h
+@@ -13,5 +13,7 @@
+ #define _ATH79_DEV_USB_H
+
+ void ath79_register_usb(void);
++void ath79_set_usb_power_gpio(unsigned int gpio, unsigned long flags,
++ const char *label);
+
+ #endif /* _ATH79_DEV_USB_H */
--- /dev/null
+--- a/arch/mips/ath79/dev-common.c
++++ b/arch/mips/ath79/dev-common.c
+@@ -87,6 +87,15 @@ void __init ath79_register_uart(void)
+ if (IS_ERR(clk))
+ panic("unable to get UART clock, err=%ld", PTR_ERR(clk));
+
++ if (soc_is_ar71xx())
++ ath79_gpio_function_enable(AR71XX_GPIO_FUNC_UART_EN);
++ else if (soc_is_ar724x())
++ ath79_gpio_function_enable(AR724X_GPIO_FUNC_UART_EN);
++ else if (soc_is_ar913x())
++ ath79_gpio_function_enable(AR913X_GPIO_FUNC_UART_EN);
++ else if (soc_is_ar933x())
++ ath79_gpio_function_enable(AR933X_GPIO_FUNC_UART_EN);
++
+ if (soc_is_ar71xx() ||
+ soc_is_ar724x() ||
+ soc_is_ar913x() ||
--- /dev/null
+--- a/arch/mips/ath79/early_printk.c
++++ b/arch/mips/ath79/early_printk.c
+@@ -56,6 +56,46 @@ static void prom_putchar_dummy(unsigned
+ /* nothing to do */
+ }
+
++static void prom_enable_uart(u32 id)
++{
++ void __iomem *gpio_base;
++ u32 uart_en;
++ u32 t;
++
++ switch (id) {
++ case REV_ID_MAJOR_AR71XX:
++ uart_en = AR71XX_GPIO_FUNC_UART_EN;
++ break;
++
++ case REV_ID_MAJOR_AR7240:
++ case REV_ID_MAJOR_AR7241:
++ case REV_ID_MAJOR_AR7242:
++ uart_en = AR724X_GPIO_FUNC_UART_EN;
++ break;
++
++ case REV_ID_MAJOR_AR913X:
++ uart_en = AR913X_GPIO_FUNC_UART_EN;
++ break;
++
++ case REV_ID_MAJOR_AR9330:
++ case REV_ID_MAJOR_AR9331:
++ uart_en = AR933X_GPIO_FUNC_UART_EN;
++ break;
++
++ case REV_ID_MAJOR_AR9341:
++ case REV_ID_MAJOR_AR9342:
++ case REV_ID_MAJOR_AR9344:
++ /* TODO */
++ default:
++ return;
++ }
++
++ gpio_base = (void __iomem *)(KSEG1ADDR(AR71XX_GPIO_BASE));
++ t = __raw_readl(gpio_base + AR71XX_GPIO_REG_FUNC);
++ t |= uart_en;
++ __raw_writel(t, gpio_base + AR71XX_GPIO_REG_FUNC);
++}
++
+ static void prom_putchar_init(void)
+ {
+ void __iomem *base;
+@@ -85,8 +125,10 @@ static void prom_putchar_init(void)
+
+ default:
+ _prom_putchar = prom_putchar_dummy;
+- break;
++ return;
+ }
++
++ prom_enable_uart(id);
+ }
+
+ void prom_putchar(unsigned char ch)
--- /dev/null
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -21,6 +21,10 @@
+ #include <linux/bitops.h>
+
+ #define AR71XX_APB_BASE 0x18000000
++#define AR71XX_GE0_BASE 0x19000000
++#define AR71XX_GE0_SIZE 0x10000
++#define AR71XX_GE1_BASE 0x1a000000
++#define AR71XX_GE1_SIZE 0x10000
+ #define AR71XX_EHCI_BASE 0x1b000000
+ #define AR71XX_EHCI_SIZE 0x1000
+ #define AR71XX_OHCI_BASE 0x1c000000
+@@ -40,6 +44,8 @@
+ #define AR71XX_PLL_SIZE 0x100
+ #define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000)
+ #define AR71XX_RESET_SIZE 0x100
++#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000)
++#define AR71XX_MII_SIZE 0x100
+
+ #define AR71XX_PCI_MEM_BASE 0x10000000
+ #define AR71XX_PCI_MEM_SIZE 0x07000000
+@@ -82,17 +88,23 @@
+
+ #define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000)
+ #define AR933X_UART_SIZE 0x14
++#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
++#define AR933X_GMAC_SIZE 0x04
+ #define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
+ #define AR933X_WMAC_SIZE 0x20000
+ #define AR933X_EHCI_BASE 0x1b000000
+ #define AR933X_EHCI_SIZE 0x1000
+
++#define AR934X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
++#define AR934X_GMAC_SIZE 0x14
+ #define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
+ #define AR934X_WMAC_SIZE 0x20000
+ #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
+ #define AR934X_SRIF_SIZE 0x1000
+ #define AR934X_EHCI_BASE 0x1b000000
+ #define AR934X_EHCI_SIZE 0x200
++#define AR934X_NFC_BASE 0x1b000200
++#define AR934X_NFC_SIZE 0xb8
+
+ #define QCA955X_PCI_MEM_BASE0 0x10000000
+ #define QCA955X_PCI_MEM_BASE1 0x12000000
+@@ -112,6 +124,10 @@
+ #define QCA955X_EHCI0_BASE 0x1b000000
+ #define QCA955X_EHCI1_BASE 0x1b400000
+ #define QCA955X_EHCI_SIZE 0x200
++#define QCA955X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
++#define QCA955X_GMAC_SIZE 0x40
++#define QCA955X_NFC_BASE 0x1b000200
++#define QCA955X_NFC_SIZE 0xb8
+
+ /*
+ * DDR_CTRL block
+@@ -167,6 +183,9 @@
+ #define AR71XX_AHB_DIV_SHIFT 20
+ #define AR71XX_AHB_DIV_MASK 0x7
+
++#define AR71XX_ETH0_PLL_SHIFT 17
++#define AR71XX_ETH1_PLL_SHIFT 19
++
+ #define AR724X_PLL_REG_CPU_CONFIG 0x00
+ #define AR724X_PLL_REG_PCIE_CONFIG 0x18
+
+@@ -179,6 +198,8 @@
+ #define AR724X_DDR_DIV_SHIFT 22
+ #define AR724X_DDR_DIV_MASK 0x3
+
++#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c
++
+ #define AR913X_PLL_REG_CPU_CONFIG 0x00
+ #define AR913X_PLL_REG_ETH_CONFIG 0x04
+ #define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14
+@@ -191,6 +212,9 @@
+ #define AR913X_AHB_DIV_SHIFT 19
+ #define AR913X_AHB_DIV_MASK 0x1
+
++#define AR913X_ETH0_PLL_SHIFT 20
++#define AR913X_ETH1_PLL_SHIFT 22
++
+ #define AR933X_PLL_CPU_CONFIG_REG 0x00
+ #define AR933X_PLL_CLOCK_CTRL_REG 0x08
+
+@@ -212,6 +236,8 @@
+ #define AR934X_PLL_CPU_CONFIG_REG 0x00
+ #define AR934X_PLL_DDR_CONFIG_REG 0x04
+ #define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08
++#define AR934X_PLL_SWITCH_CLOCK_CONTROL_REG 0x24
++#define AR934X_PLL_ETH_XMII_CONTROL_REG 0x2c
+
+ #define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
+ #define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
+@@ -244,6 +270,8 @@
+ #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
+ #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
+
++#define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6)
++
+ #define QCA955X_PLL_CPU_CONFIG_REG 0x00
+ #define QCA955X_PLL_DDR_CONFIG_REG 0x04
+ #define QCA955X_PLL_CLK_CTRL_REG 0x08
+@@ -370,16 +398,50 @@
+ #define AR913X_RESET_USB_HOST BIT(5)
+ #define AR913X_RESET_USB_PHY BIT(4)
+
++#define AR933X_RESET_GE1_MDIO BIT(23)
++#define AR933X_RESET_GE0_MDIO BIT(22)
++#define AR933X_RESET_GE1_MAC BIT(13)
+ #define AR933X_RESET_WMAC BIT(11)
++#define AR933X_RESET_GE0_MAC BIT(9)
+ #define AR933X_RESET_USB_HOST BIT(5)
+ #define AR933X_RESET_USB_PHY BIT(4)
+ #define AR933X_RESET_USBSUS_OVERRIDE BIT(3)
+
++#define AR934X_RESET_HOST BIT(31)
++#define AR934X_RESET_SLIC BIT(30)
++#define AR934X_RESET_HDMA BIT(29)
++#define AR934X_RESET_EXTERNAL BIT(28)
++#define AR934X_RESET_RTC BIT(27)
++#define AR934X_RESET_PCIE_EP_INT BIT(26)
++#define AR934X_RESET_CHKSUM_ACC BIT(25)
++#define AR934X_RESET_FULL_CHIP BIT(24)
++#define AR934X_RESET_GE1_MDIO BIT(23)
++#define AR934X_RESET_GE0_MDIO BIT(22)
++#define AR934X_RESET_CPU_NMI BIT(21)
++#define AR934X_RESET_CPU_COLD BIT(20)
++#define AR934X_RESET_HOST_RESET_INT BIT(19)
++#define AR934X_RESET_PCIE_EP BIT(18)
++#define AR934X_RESET_UART1 BIT(17)
++#define AR934X_RESET_DDR BIT(16)
++#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
++#define AR934X_RESET_NANDF BIT(14)
++#define AR934X_RESET_GE1_MAC BIT(13)
++#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12)
+ #define AR934X_RESET_USB_PHY_ANALOG BIT(11)
++#define AR934X_RESET_HOST_DMA_INT BIT(10)
++#define AR934X_RESET_GE0_MAC BIT(9)
++#define AR934X_RESET_ETH_SWITCH BIT(8)
++#define AR934X_RESET_PCIE_PHY BIT(7)
++#define AR934X_RESET_PCIE BIT(6)
+ #define AR934X_RESET_USB_HOST BIT(5)
+ #define AR934X_RESET_USB_PHY BIT(4)
+ #define AR934X_RESET_USBSUS_OVERRIDE BIT(3)
++#define AR934X_RESET_LUT BIT(2)
++#define AR934X_RESET_MBOX BIT(1)
++#define AR934X_RESET_I2S BIT(0)
+
++#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18)
++#define AR933X_BOOTSTRAP_EEPBUSY BIT(4)
+ #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
+
+ #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)
+@@ -520,6 +582,14 @@
+ #define AR71XX_GPIO_REG_INT_ENABLE 0x24
+ #define AR71XX_GPIO_REG_FUNC 0x28
+
++#define AR934X_GPIO_REG_OUT_FUNC0 0x2c
++#define AR934X_GPIO_REG_OUT_FUNC1 0x30
++#define AR934X_GPIO_REG_OUT_FUNC2 0x34
++#define AR934X_GPIO_REG_OUT_FUNC3 0x38
++#define AR934X_GPIO_REG_OUT_FUNC4 0x3c
++#define AR934X_GPIO_REG_OUT_FUNC5 0x40
++#define AR934X_GPIO_REG_FUNC 0x6c
++
+ #define AR71XX_GPIO_COUNT 16
+ #define AR7240_GPIO_COUNT 18
+ #define AR7241_GPIO_COUNT 20
+@@ -549,4 +619,133 @@
+ #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13
+ #define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7
+
++#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17)
++#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16)
++#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13)
++#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12)
++#define AR71XX_GPIO_FUNC_UART_EN BIT(8)
++#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4)
++#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0)
++
++#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19)
++#define AR724X_GPIO_FUNC_SPI_EN BIT(18)
++#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14)
++#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13)
++#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12)
++#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11)
++#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10)
++#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9)
++#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3)
++#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2)
++#define AR724X_GPIO_FUNC_UART_EN BIT(1)
++#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0)
++
++#define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22)
++#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21)
++#define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20)
++#define AR913X_GPIO_FUNC_I2S_MCKEN BIT(19)
++#define AR913X_GPIO_FUNC_I2S1_EN BIT(18)
++#define AR913X_GPIO_FUNC_I2S0_EN BIT(17)
++#define AR913X_GPIO_FUNC_SLIC_EN BIT(16)
++#define AR913X_GPIO_FUNC_UART_RTSCTS_EN BIT(9)
++#define AR913X_GPIO_FUNC_UART_EN BIT(8)
++#define AR913X_GPIO_FUNC_USB_CLK_EN BIT(4)
++
++#define AR933X_GPIO_FUNC_SPDIF2TCK BIT(31)
++#define AR933X_GPIO_FUNC_SPDIF_EN BIT(30)
++#define AR933X_GPIO_FUNC_I2SO_22_18_EN BIT(29)
++#define AR933X_GPIO_FUNC_I2S_MCK_EN BIT(27)
++#define AR933X_GPIO_FUNC_I2SO_EN BIT(26)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL BIT(25)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL BIT(24)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT BIT(23)
++#define AR933X_GPIO_FUNC_SPI_EN BIT(18)
++#define AR933X_GPIO_FUNC_SPI_CS_EN2 BIT(14)
++#define AR933X_GPIO_FUNC_SPI_CS_EN1 BIT(13)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3)
++#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2)
++#define AR933X_GPIO_FUNC_UART_EN BIT(1)
++#define AR933X_GPIO_FUNC_JTAG_DISABLE BIT(0)
++
++#define AR934X_GPIO_FUNC_DDR_DQOE_EN BIT(17)
++#define AR934X_GPIO_FUNC_SPI_CS_1_EN BIT(14)
++#define AR934X_GPIO_FUNC_SPI_CS_0_EN BIT(13)
++
++#define AR934X_GPIO_OUT_GPIO 0x00
++
++/*
++ * MII_CTRL block
++ */
++#define AR71XX_MII_REG_MII0_CTRL 0x00
++#define AR71XX_MII_REG_MII1_CTRL 0x04
++
++#define AR71XX_MII_CTRL_IF_MASK 3
++#define AR71XX_MII_CTRL_SPEED_SHIFT 4
++#define AR71XX_MII_CTRL_SPEED_MASK 3
++#define AR71XX_MII_CTRL_SPEED_10 0
++#define AR71XX_MII_CTRL_SPEED_100 1
++#define AR71XX_MII_CTRL_SPEED_1000 2
++
++#define AR71XX_MII0_CTRL_IF_GMII 0
++#define AR71XX_MII0_CTRL_IF_MII 1
++#define AR71XX_MII0_CTRL_IF_RGMII 2
++#define AR71XX_MII0_CTRL_IF_RMII 3
++
++#define AR71XX_MII1_CTRL_IF_RGMII 0
++#define AR71XX_MII1_CTRL_IF_RMII 1
++
++/*
++ * AR933X GMAC interface
++ */
++#define AR933X_GMAC_REG_ETH_CFG 0x00
++
++#define AR933X_ETH_CFG_RGMII_GE0 BIT(0)
++#define AR933X_ETH_CFG_MII_GE0 BIT(1)
++#define AR933X_ETH_CFG_GMII_GE0 BIT(2)
++#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3)
++#define AR933X_ETH_CFG_MII_GE0_SLAVE BIT(4)
++#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5)
++#define AR933X_ETH_CFG_SW_PHY_SWAP BIT(7)
++#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8)
++#define AR933X_ETH_CFG_RMII_GE0 BIT(9)
++#define AR933X_ETH_CFG_RMII_GE0_SPD_10 0
++#define AR933X_ETH_CFG_RMII_GE0_SPD_100 BIT(10)
++
++/*
++ * AR934X GMAC Interface
++ */
++#define AR934X_GMAC_REG_ETH_CFG 0x00
++
++#define AR934X_ETH_CFG_RGMII_GMAC0 BIT(0)
++#define AR934X_ETH_CFG_MII_GMAC0 BIT(1)
++#define AR934X_ETH_CFG_GMII_GMAC0 BIT(2)
++#define AR934X_ETH_CFG_MII_GMAC0_MASTER BIT(3)
++#define AR934X_ETH_CFG_MII_GMAC0_SLAVE BIT(4)
++#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN BIT(5)
++#define AR934X_ETH_CFG_SW_ONLY_MODE BIT(6)
++#define AR934X_ETH_CFG_SW_PHY_SWAP BIT(7)
++#define AR934X_ETH_CFG_SW_APB_ACCESS BIT(9)
++#define AR934X_ETH_CFG_RMII_GMAC0 BIT(10)
++#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11)
++#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12)
++#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13)
++
++/*
++ * QCA955X GMAC Interface
++ */
++
++#define QCA955X_GMAC_REG_ETH_CFG 0x00
++
++#define QCA955X_ETH_CFG_RGMII_GMAC0 BIT(0)
++#define QCA955X_ETH_CFG_SGMII_GMAC0 BIT(6)
++
+ #endif /* __ASM_MACH_AR71XX_REGS_H */
--- /dev/null
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -106,6 +106,20 @@ config SOC_QCA955X
+ select PCI_AR724X if PCI
+ def_bool n
+
++config ATH79_DEV_M25P80
++ select ATH79_DEV_SPI
++ def_bool n
++
++config ATH79_DEV_AP9X_PCI
++ select ATH79_PCI_ATH9K_FIXUP
++ def_bool n
++
++config ATH79_DEV_DSA
++ def_bool n
++
++config ATH79_DEV_ETH
++ def_bool n
++
+ config PCI_AR724X
+ def_bool n
+
+@@ -115,6 +129,10 @@ config ATH79_DEV_GPIO_BUTTONS
+ config ATH79_DEV_LEDS_GPIO
+ def_bool n
+
++config ATH79_DEV_NFC
++ depends on (SOC_AR934X)
++ def_bool n
++
+ config ATH79_DEV_SPI
+ def_bool n
+
+@@ -125,4 +143,13 @@ config ATH79_DEV_WMAC
+ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
+ def_bool n
+
++config ATH79_NVRAM
++ def_bool n
++
++config ATH79_PCI_ATH9K_FIXUP
++ def_bool n
++
++config ATH79_ROUTERBOOT
++ def_bool n
++
+ endif
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -17,13 +17,25 @@ obj-$(CONFIG_PCI) += pci.o
+ # Devices
+ #
+ obj-y += dev-common.o
++obj-$(CONFIG_ATH79_DEV_AP9X_PCI) += dev-ap9x-pci.o
++obj-$(CONFIG_ATH79_DEV_DSA) += dev-dsa.o
++obj-$(CONFIG_ATH79_DEV_ETH) += dev-eth.o
+ obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o
+ obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o
++obj-$(CONFIG_ATH79_DEV_M25P80) += dev-m25p80.o
++obj-$(CONFIG_ATH79_DEV_NFC) += dev-nfc.o
+ obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o
+ obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o
+ obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o
+
+ #
++# Miscellaneous objects
++#
++obj-$(CONFIG_ATH79_NVRAM) += nvram.o
++obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += pci-ath9k-fixup.o
++obj-$(CONFIG_ATH79_ROUTERBOOT) += routerboot.o
++
++#
+ # Machines
+ #
+ obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
--- /dev/null
+--- a/arch/mips/ath79/mach-ap121.c
++++ b/arch/mips/ath79/mach-ap121.c
+@@ -1,19 +1,21 @@
+ /*
+ * Atheros AP121 board support
+ *
+- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+-#include "machtypes.h"
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
+ #include "dev-wmac.h"
++#include "machtypes.h"
+
+ #define AP121_GPIO_LED_WLAN 0
+ #define AP121_GPIO_LED_USB 1
+@@ -24,7 +26,14 @@
+ #define AP121_KEYS_POLL_INTERVAL 20 /* msecs */
+ #define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL)
+
+-#define AP121_CAL_DATA_ADDR 0x1fff1000
++#define AP121_MAC0_OFFSET 0x0000
++#define AP121_MAC1_OFFSET 0x0006
++#define AP121_CALDATA_OFFSET 0x1000
++#define AP121_WMAC_MAC_OFFSET 0x1002
++
++#define AP121_MINI_GPIO_LED_WLAN 0
++#define AP121_MINI_GPIO_BTN_JUMPSTART 12
++#define AP121_MINI_GPIO_BTN_RESET 11
+
+ static struct gpio_led ap121_leds_gpio[] __initdata = {
+ {
+@@ -58,41 +67,78 @@ static struct gpio_keys_button ap121_gpi
+ }
+ };
+
+-static struct ath79_spi_controller_data ap121_spi0_data = {
+- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+- .cs_line = 0,
++static struct gpio_led ap121_mini_leds_gpio[] __initdata = {
++ {
++ .name = "ap121:green:wlan",
++ .gpio = AP121_MINI_GPIO_LED_WLAN,
++ .active_low = 0,
++ },
+ };
+
+-static struct spi_board_info ap121_spi_info[] = {
++static struct gpio_keys_button ap121_mini_gpio_keys[] __initdata = {
+ {
+- .bus_num = 0,
+- .chip_select = 0,
+- .max_speed_hz = 25000000,
+- .modalias = "mx25l1606e",
+- .controller_data = &ap121_spi0_data,
++ .desc = "jumpstart button",
++ .type = EV_KEY,
++ .code = KEY_WPS_BUTTON,
++ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
++ .gpio = AP121_MINI_GPIO_BTN_JUMPSTART,
++ .active_low = 1,
++ },
++ {
++ .desc = "reset button",
++ .type = EV_KEY,
++ .code = KEY_RESTART,
++ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
++ .gpio = AP121_MINI_GPIO_BTN_RESET,
++ .active_low = 1,
+ }
+ };
+
+-static struct ath79_spi_platform_data ap121_spi_data = {
+- .bus_num = 0,
+- .num_chipselect = 1,
+-};
++static void __init ap121_common_setup(void)
++{
++ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++ ath79_register_m25p80(NULL);
++ ath79_register_wmac(art + AP121_CALDATA_OFFSET,
++ art + AP121_WMAC_MAC_OFFSET);
++
++ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP121_MAC0_OFFSET, 0);
++ ath79_init_mac(ath79_eth1_data.mac_addr, art + AP121_MAC1_OFFSET, 0);
++
++ ath79_register_mdio(0, 0x0);
++
++ /* LAN ports */
++ ath79_register_eth(1);
++
++ /* WAN port */
++ ath79_register_eth(0);
++}
+
+ static void __init ap121_setup(void)
+ {
+- u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);
++ ap121_common_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
+ ap121_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap121_gpio_keys),
+ ap121_gpio_keys);
+-
+- ath79_register_spi(&ap121_spi_data, ap121_spi_info,
+- ARRAY_SIZE(ap121_spi_info));
+ ath79_register_usb();
+- ath79_register_wmac(cal_data, NULL);
+ }
+
+ MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
+ ap121_setup);
++
++static void __init ap121_mini_setup(void)
++{
++ ap121_common_setup();
++
++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_mini_leds_gpio),
++ ap121_mini_leds_gpio);
++ ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
++ ARRAY_SIZE(ap121_mini_gpio_keys),
++ ap121_mini_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_AP121_MINI, "AP121-MINI", "Atheros AP121-MINI",
++ ap121_mini_setup);
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -5,9 +5,10 @@ menu "Atheros AR71XX/AR724X/AR913X machi
+ config ATH79_MACH_AP121
+ bool "Atheros AP121 reference board"
+ select SOC_AR933X
++ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+- select ATH79_DEV_SPI
++ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ help
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -17,6 +17,7 @@
+ enum ath79_mach_type {
+ ATH79_MACH_GENERIC = 0,
+ ATH79_MACH_AP121, /* Atheros AP121 reference board */
++ ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
+ ATH79_MACH_AP136, /* Atheros AP136 reference board */
+ ATH79_MACH_AP81, /* Atheros AP81 reference board */
+ ATH79_MACH_DB120, /* Atheros DB120 reference board */
--- /dev/null
+--- a/arch/mips/ath79/mach-ap81.c
++++ b/arch/mips/ath79/mach-ap81.c
+@@ -9,12 +9,16 @@
+ * by the Free Software Foundation.
+ */
+
+-#include "machtypes.h"
+-#include "dev-wmac.h"
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+-#include "dev-spi.h"
++#include "dev-m25p80.h"
+ #include "dev-usb.h"
++#include "dev-wmac.h"
++#include "machtypes.h"
+
+ #define AP81_GPIO_LED_STATUS 1
+ #define AP81_GPIO_LED_AOSS 3
+@@ -29,6 +33,37 @@
+
+ #define AP81_CAL_DATA_ADDR 0x1fff1000
+
++static struct mtd_partition ap81_partitions[] = {
++ {
++ .name = "u-boot",
++ .offset = 0,
++ .size = 0x040000,
++ .mask_flags = MTD_WRITEABLE,
++ }, {
++ .name = "u-boot-env",
++ .offset = 0x040000,
++ .size = 0x010000,
++ }, {
++ .name = "rootfs",
++ .offset = 0x050000,
++ .size = 0x500000,
++ }, {
++ .name = "uImage",
++ .offset = 0x550000,
++ .size = 0x100000,
++ }, {
++ .name = "ART",
++ .offset = 0x650000,
++ .size = 0x1b0000,
++ .mask_flags = MTD_WRITEABLE,
++ }
++};
++
++static struct flash_platform_data ap81_flash_data = {
++ .parts = ap81_partitions,
++ .nr_parts = ARRAY_SIZE(ap81_partitions),
++};
++
+ static struct gpio_led ap81_leds_gpio[] __initdata = {
+ {
+ .name = "ap81:green:status",
+@@ -67,26 +102,6 @@ static struct gpio_keys_button ap81_gpio
+ }
+ };
+
+-static struct ath79_spi_controller_data ap81_spi0_data = {
+- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+- .cs_line = 0,
+-};
+-
+-static struct spi_board_info ap81_spi_info[] = {
+- {
+- .bus_num = 0,
+- .chip_select = 0,
+- .max_speed_hz = 25000000,
+- .modalias = "m25p64",
+- .controller_data = &ap81_spi0_data,
+- }
+-};
+-
+-static struct ath79_spi_platform_data ap81_spi_data = {
+- .bus_num = 0,
+- .num_chipselect = 1,
+-};
+-
+ static void __init ap81_setup(void)
+ {
+ u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR);
+@@ -96,10 +111,24 @@ static void __init ap81_setup(void)
+ ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap81_gpio_keys),
+ ap81_gpio_keys);
+- ath79_register_spi(&ap81_spi_data, ap81_spi_info,
+- ARRAY_SIZE(ap81_spi_info));
++ ath79_register_m25p80(&ap81_flash_data);
+ ath79_register_wmac(cal_data, NULL);
+ ath79_register_usb();
++
++ ath79_register_mdio(0, 0x0);
++
++ ath79_init_mac(ath79_eth0_data.mac_addr, cal_data, 0);
++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++ ath79_eth0_data.speed = SPEED_100;
++ ath79_eth0_data.duplex = DUPLEX_FULL;
++ ath79_eth0_data.has_ar8216 = 1;
++
++ ath79_init_mac(ath79_eth1_data.mac_addr, cal_data, 1);
++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++ ath79_eth1_data.phy_mask = 0x10;
++
++ ath79_register_eth(0);
++ ath79_register_eth(1);
+ }
+
+ MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -30,9 +30,10 @@ config ATH79_MACH_AP136
+ config ATH79_MACH_AP81
+ bool "Atheros AP81 reference board"
+ select SOC_AR913X
++ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+- select ATH79_DEV_SPI
++ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ help
--- /dev/null
+--- a/arch/mips/ath79/mach-db120.c
++++ b/arch/mips/ath79/mach-db120.c
+@@ -2,7 +2,7 @@
+ * Atheros DB120 reference board support
+ *
+ * Copyright (c) 2011 Qualcomm Atheros
+- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+@@ -19,16 +19,26 @@
+ */
+
+ #include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/platform_device.h>
+ #include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
+
+-#include "machtypes.h"
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-nfc.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
+ #include "dev-wmac.h"
+-#include "pci.h"
++#include "machtypes.h"
+
++#define DB120_GPIO_LED_USB 11
+ #define DB120_GPIO_LED_WLAN_5G 12
+ #define DB120_GPIO_LED_WLAN_2G 13
+ #define DB120_GPIO_LED_STATUS 14
+@@ -39,8 +49,10 @@
+ #define DB120_KEYS_POLL_INTERVAL 20 /* msecs */
+ #define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL)
+
+-#define DB120_WMAC_CALDATA_OFFSET 0x1000
+-#define DB120_PCIE_CALDATA_OFFSET 0x5000
++#define DB120_MAC0_OFFSET 0
++#define DB120_MAC1_OFFSET 6
++#define DB120_WMAC_CALDATA_OFFSET 0x1000
++#define DB120_PCIE_CALDATA_OFFSET 0x5000
+
+ static struct gpio_led db120_leds_gpio[] __initdata = {
+ {
+@@ -63,6 +75,11 @@ static struct gpio_led db120_leds_gpio[]
+ .gpio = DB120_GPIO_LED_WLAN_2G,
+ .active_low = 1,
+ },
++ {
++ .name = "db120:green:usb",
++ .gpio = DB120_GPIO_LED_USB,
++ .active_low = 1,
++ }
+ };
+
+ static struct gpio_keys_button db120_gpio_keys[] __initdata = {
+@@ -76,66 +93,85 @@ static struct gpio_keys_button db120_gpi
+ },
+ };
+
+-static struct ath79_spi_controller_data db120_spi0_data = {
+- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+- .cs_line = 0,
++static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = {
++ .mode = AR8327_PAD_MAC_RGMII,
++ .txclk_delay_en = true,
++ .rxclk_delay_en = true,
++ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+ };
+
+-static struct spi_board_info db120_spi_info[] = {
+- {
+- .bus_num = 0,
+- .chip_select = 0,
+- .max_speed_hz = 25000000,
+- .modalias = "s25sl064a",
+- .controller_data = &db120_spi0_data,
+- }
++static struct ar8327_led_cfg db120_ar8327_led_cfg = {
++ .led_ctrl0 = 0x00000000,
++ .led_ctrl1 = 0xc737c737,
++ .led_ctrl2 = 0x00000000,
++ .led_ctrl3 = 0x00c30c00,
++ .open_drain = true,
+ };
+
+-static struct ath79_spi_platform_data db120_spi_data = {
+- .bus_num = 0,
+- .num_chipselect = 1,
++static struct ar8327_platform_data db120_ar8327_data = {
++ .pad0_cfg = &db120_ar8327_pad0_cfg,
++ .cpuport_cfg = {
++ .force_link = 1,
++ .speed = AR8327_PORT_SPEED_1000,
++ .duplex = 1,
++ .txpause = 1,
++ .rxpause = 1,
++ },
++ .led_cfg = &db120_ar8327_led_cfg,
+ };
+
+-#ifdef CONFIG_PCI
+-static struct ath9k_platform_data db120_ath9k_data;
+-
+-static int db120_pci_plat_dev_init(struct pci_dev *dev)
+-{
+- switch (PCI_SLOT(dev->devfn)) {
+- case 0:
+- dev->dev.platform_data = &db120_ath9k_data;
+- break;
+- }
+-
+- return 0;
+-}
+-
+-static void __init db120_pci_init(u8 *eeprom)
+-{
+- memcpy(db120_ath9k_data.eeprom_data, eeprom,
+- sizeof(db120_ath9k_data.eeprom_data));
+-
+- ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
+- ath79_register_pci();
+-}
+-#else
+-static inline void db120_pci_init(void) {}
+-#endif /* CONFIG_PCI */
++static struct mdio_board_info db120_mdio0_info[] = {
++ {
++ .bus_id = "ag71xx-mdio.0",
++ .phy_addr = 0,
++ .platform_data = &db120_ar8327_data,
++ },
++};
+
+ static void __init db120_setup(void)
+ {
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
++ ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO);
++ ath79_register_m25p80(NULL);
++
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
+ db120_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(db120_gpio_keys),
+ db120_gpio_keys);
+- ath79_register_spi(&db120_spi_data, db120_spi_info,
+- ARRAY_SIZE(db120_spi_info));
+ ath79_register_usb();
+ ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
+- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
++ ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL);
++
++ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
++ AR934X_ETH_CFG_SW_ONLY_MODE);
++
++ ath79_register_mdio(1, 0x0);
++ ath79_register_mdio(0, 0x0);
++
++ ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0);
++
++ mdiobus_register_board_info(db120_mdio0_info,
++ ARRAY_SIZE(db120_mdio0_info));
++
++ /* GMAC0 is connected to an AR8327 switch */
++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++ ath79_eth0_data.phy_mask = BIT(0);
++ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++ ath79_eth0_pll_data.pll_1000 = 0x06000000;
++ ath79_register_eth(0);
++
++ /* GMAC1 is connected to the internal switch */
++ ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0);
++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++ ath79_eth1_data.speed = SPEED_1000;
++ ath79_eth1_data.duplex = DUPLEX_FULL;
++
++ ath79_register_eth(1);
++
++ ath79_register_nfc();
+ }
+
+ MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -43,9 +43,12 @@ config ATH79_MACH_AP81
+ config ATH79_MACH_DB120
+ bool "Atheros DB120 reference board"
+ select SOC_AR934X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+- select ATH79_DEV_SPI
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_NFC
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ help
--- /dev/null
+--- a/arch/mips/ath79/mach-pb44.c
++++ b/arch/mips/ath79/mach-pb44.c
+@@ -8,23 +8,48 @@
+ * by the Free Software Foundation.
+ */
+
++#include <linux/delay.h>
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/i2c.h>
+ #include <linux/i2c-gpio.h>
+ #include <linux/i2c/pcf857x.h>
++#include <linux/i2c/pcf857x.h>
++#include <linux/spi/flash.h>
++#include <linux/spi/vsc7385.h>
+
+-#include "machtypes.h"
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
++#include "machtypes.h"
+ #include "pci.h"
+
+ #define PB44_GPIO_I2C_SCL 0
+ #define PB44_GPIO_I2C_SDA 1
+
++#define PB44_PCF8757_VSC7395_CS 0
++#define PB44_PCF8757_STEREO_CS 1
++#define PB44_PCF8757_SLIC_CS0 2
++#define PB44_PCF8757_SLIC_TEST 3
++#define PB44_PCF8757_SLIC_INT0 4
++#define PB44_PCF8757_SLIC_INT1 5
++#define PB44_PCF8757_SW_RESET 6
++#define PB44_PCF8757_SW_JUMP 8
++#define PB44_PCF8757_LED_JUMP1 9
++#define PB44_PCF8757_LED_JUMP2 10
++#define PB44_PCF8757_TP24 11
++#define PB44_PCF8757_TP25 12
++#define PB44_PCF8757_TP26 13
++#define PB44_PCF8757_TP27 14
++#define PB44_PCF8757_TP28 15
++
+ #define PB44_GPIO_EXP_BASE 16
++#define PB44_GPIO_VSC7395_CS (PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS)
+ #define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + 6)
+ #define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + 8)
+ #define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + 9)
+@@ -92,21 +117,66 @@ static struct ath79_spi_controller_data
+ .cs_line = 0,
+ };
+
++static struct ath79_spi_controller_data pb44_spi1_data = {
++ .cs_type = ATH79_SPI_CS_TYPE_GPIO,
++ .cs_line = PB44_GPIO_VSC7395_CS,
++};
++
++static void pb44_vsc7395_reset(void)
++{
++ ath79_device_reset_set(AR71XX_RESET_GE1_PHY);
++ udelay(10);
++ ath79_device_reset_clear(AR71XX_RESET_GE1_PHY);
++ mdelay(50);
++}
++
++static struct vsc7385_platform_data pb44_vsc7395_data = {
++ .reset = pb44_vsc7395_reset,
++ .ucode_name = "vsc7395_ucode_pb44.bin",
++ .mac_cfg = {
++ .tx_ipg = 6,
++ .bit2 = 1,
++ .clk_sel = 0,
++ },
++};
++
++static const char *pb44_part_probes[] = {
++ "RedBoot",
++ NULL,
++};
++
++static struct flash_platform_data pb44_flash_data = {
++ .part_probes = pb44_part_probes,
++};
++
+ static struct spi_board_info pb44_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p64",
++ .platform_data = &pb44_flash_data,
+ .controller_data = &pb44_spi0_data,
+ },
++ {
++ .bus_num = 0,
++ .chip_select = 1,
++ .max_speed_hz = 25000000,
++ .modalias = "spi-vsc7385",
++ .platform_data = &pb44_vsc7395_data,
++ .controller_data = &pb44_spi1_data,
++ }
+ };
+
+ static struct ath79_spi_platform_data pb44_spi_data = {
+ .bus_num = 0,
+- .num_chipselect = 1,
++ .num_chipselect = 2,
+ };
+
++#define PB44_WAN_PHYMASK BIT(0)
++#define PB44_LAN_PHYMASK 0
++#define PB44_MDIO_PHYMASK (PB44_LAN_PHYMASK | PB44_WAN_PHYMASK)
++
+ static void __init pb44_init(void)
+ {
+ i2c_register_board_info(0, pb44_i2c_board_info,
+@@ -122,6 +192,22 @@ static void __init pb44_init(void)
+ ARRAY_SIZE(pb44_spi_info));
+ ath79_register_usb();
+ ath79_register_pci();
++
++ ath79_register_mdio(0, ~PB44_MDIO_PHYMASK);
++
++ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++ ath79_eth0_data.phy_mask = PB44_WAN_PHYMASK;
++
++ ath79_register_eth(0);
++
++ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++ ath79_eth1_data.speed = SPEED_1000;
++ ath79_eth1_data.duplex = DUPLEX_FULL;
++ ath79_eth1_pll_data.pll_1000 = 0x110000;
++
++ ath79_register_eth(1);
+ }
+
+ MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -58,6 +58,7 @@ config ATH79_MACH_DB120
+ config ATH79_MACH_PB44
+ bool "Atheros PB44 reference board"
+ select SOC_AR71XX
++ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_SPI
--- /dev/null
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -70,9 +70,10 @@ config ATH79_MACH_PB44
+ config ATH79_MACH_UBNT_XM
+ bool "Ubiquiti Networks XM (rev 1.0) board"
+ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+- select ATH79_DEV_SPI
++ select ATH79_DEV_M25P80
+ help
+ Say 'Y' here if you want your kernel to support the
+ Ubiquiti Networks XM (rev 1.0) board.
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -16,10 +16,11 @@
+
+ #include <asm/mach-ath79/irq.h>
+
+-#include "machtypes.h"
++#include "dev-ap9x-pci.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+-#include "dev-spi.h"
++#include "dev-m25p80.h"
++#include "machtypes.h"
+ #include "pci.h"
+
+ #define UBNT_XM_GPIO_LED_L1 0
+@@ -32,7 +33,7 @@
+ #define UBNT_XM_KEYS_POLL_INTERVAL 20
+ #define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL)
+
+-#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000)
++#define UBNT_XM_EEPROM_ADDR 0x1fff1000
+
+ static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
+ {
+@@ -65,54 +66,10 @@ static struct gpio_keys_button ubnt_xm_g
+ }
+ };
+
+-static struct ath79_spi_controller_data ubnt_xm_spi0_data = {
+- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+- .cs_line = 0,
+-};
+-
+-static struct spi_board_info ubnt_xm_spi_info[] = {
+- {
+- .bus_num = 0,
+- .chip_select = 0,
+- .max_speed_hz = 25000000,
+- .modalias = "mx25l6405d",
+- .controller_data = &ubnt_xm_spi0_data,
+- }
+-};
+-
+-static struct ath79_spi_platform_data ubnt_xm_spi_data = {
+- .bus_num = 0,
+- .num_chipselect = 1,
+-};
+-
+-#ifdef CONFIG_PCI
+-static struct ath9k_platform_data ubnt_xm_eeprom_data;
+-
+-static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
+-{
+- switch (PCI_SLOT(dev->devfn)) {
+- case 0:
+- dev->dev.platform_data = &ubnt_xm_eeprom_data;
+- break;
+- }
+-
+- return 0;
+-}
+-
+-static void __init ubnt_xm_pci_init(void)
+-{
+- memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
+- sizeof(ubnt_xm_eeprom_data.eeprom_data));
+-
+- ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
+- ath79_register_pci();
+-}
+-#else
+-static inline void ubnt_xm_pci_init(void) {}
+-#endif /* CONFIG_PCI */
+-
+ static void __init ubnt_xm_init(void)
+ {
++ u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR);
++
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
+ ubnt_xm_leds_gpio);
+
+@@ -120,10 +77,8 @@ static void __init ubnt_xm_init(void)
+ ARRAY_SIZE(ubnt_xm_gpio_keys),
+ ubnt_xm_gpio_keys);
+
+- ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
+- ARRAY_SIZE(ubnt_xm_spi_info));
+-
+- ubnt_xm_pci_init();
++ ath79_register_m25p80(NULL);
++ ap91_pci_init(eeprom, NULL);
+ }
+
+ MIPS_MACHINE(ATH79_MACH_UBNT_XM,
--- /dev/null
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -13,15 +13,17 @@
+ #include <linux/init.h>
+ #include <linux/pci.h>
+ #include <linux/ath9k_platform.h>
++#include <linux/etherdevice.h>
+
+ #include <asm/mach-ath79/irq.h>
+
+ #include "dev-ap9x-pci.h"
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+ #include "dev-m25p80.h"
++#include "dev-usb.h"
+ #include "machtypes.h"
+-#include "pci.h"
+
+ #define UBNT_XM_GPIO_LED_L1 0
+ #define UBNT_XM_GPIO_LED_L2 1
+@@ -37,19 +39,19 @@
+
+ static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
+ {
+- .name = "ubnt-xm:red:link1",
++ .name = "ubnt:red:link1",
+ .gpio = UBNT_XM_GPIO_LED_L1,
+ .active_low = 0,
+ }, {
+- .name = "ubnt-xm:orange:link2",
++ .name = "ubnt:orange:link2",
+ .gpio = UBNT_XM_GPIO_LED_L2,
+ .active_low = 0,
+ }, {
+- .name = "ubnt-xm:green:link3",
++ .name = "ubnt:green:link3",
+ .gpio = UBNT_XM_GPIO_LED_L3,
+ .active_low = 0,
+ }, {
+- .name = "ubnt-xm:green:link4",
++ .name = "ubnt:green:link4",
+ .gpio = UBNT_XM_GPIO_LED_L4,
+ .active_low = 0,
+ },
+@@ -66,9 +68,13 @@ static struct gpio_keys_button ubnt_xm_g
+ }
+ };
+
++#define UBNT_M_WAN_PHYMASK BIT(4)
++
+ static void __init ubnt_xm_init(void)
+ {
+ u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR);
++ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
+ ubnt_xm_leds_gpio);
+@@ -79,9 +85,112 @@ static void __init ubnt_xm_init(void)
+
+ ath79_register_m25p80(NULL);
+ ap91_pci_init(eeprom, NULL);
++
++ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
++ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
++ ath79_register_eth(0);
+ }
+
+ MIPS_MACHINE(ATH79_MACH_UBNT_XM,
+ "UBNT-XM",
+ "Ubiquiti Networks XM (rev 1.0) board",
+ ubnt_xm_init);
++
++MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M",
++ ubnt_xm_init);
++
++static void __init ubnt_rocket_m_setup(void)
++{
++ ubnt_xm_init();
++ ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M",
++ ubnt_rocket_m_setup);
++
++static void __init ubnt_nano_m_setup(void)
++{
++ ubnt_xm_init();
++ ath79_register_eth(1);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M",
++ ubnt_nano_m_setup);
++
++static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = {
++ {
++ .name = "ubnt:green:globe",
++ .gpio = 0,
++ .active_low = 1,
++ }, {
++ .name = "ubnt:green:power",
++ .gpio = 11,
++ .active_low = 1,
++ .default_state = LEDS_GPIO_DEFSTATE_ON,
++ }
++};
++
++static void __init ubnt_airrouter_setup(void)
++{
++ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++ ath79_register_m25p80(NULL);
++ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
++
++ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++ ath79_init_local_mac(ath79_eth1_data.mac_addr, mac1);
++
++ ath79_register_eth(1);
++ ath79_register_eth(0);
++ ath79_register_usb();
++
++ ap91_pci_init(ee, NULL);
++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio),
++ ubnt_airrouter_leds_gpio);
++
++ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++ ARRAY_SIZE(ubnt_xm_gpio_keys),
++ ubnt_xm_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter",
++ ubnt_airrouter_setup);
++
++static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = {
++ {
++ .name = "ubnt:orange:dome",
++ .gpio = 1,
++ .active_low = 0,
++ }, {
++ .name = "ubnt:green:dome",
++ .gpio = 0,
++ .active_low = 0,
++ }
++};
++
++static void __init ubnt_unifi_setup(void)
++{
++ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
++ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++ ath79_register_m25p80(NULL);
++
++ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
++
++ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++ ath79_register_eth(0);
++
++ ap91_pci_init(ee, NULL);
++
++ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio),
++ ubnt_unifi_leds_gpio);
++
++ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++ ARRAY_SIZE(ubnt_xm_gpio_keys),
++ ubnt_xm_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi",
++ ubnt_unifi_setup);
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -71,9 +71,11 @@ config ATH79_MACH_UBNT_XM
+ bool "Ubiquiti Networks XM (rev 1.0) board"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
+ help
+ Say 'Y' here if you want your kernel to support the
+ Ubiquiti Networks XM (rev 1.0) board.
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -22,6 +22,11 @@ enum ath79_mach_type {
+ ATH79_MACH_AP81, /* Atheros AP81 reference board */
+ ATH79_MACH_DB120, /* Atheros DB120 reference board */
+ ATH79_MACH_PB44, /* Atheros PB44 reference board */
++ ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
++ ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
++ ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
++ ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
++ ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */
+ ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
+ };
+
--- /dev/null
+--- a/arch/mips/ath79/mach-ap136.c
++++ b/arch/mips/ath79/mach-ap136.c
+@@ -1,5 +1,5 @@
+ /*
+- * Qualcomm Atheros AP136 reference board support
++ * Atheros AP136 reference board support
+ *
+ * Copyright (c) 2012 Qualcomm Atheros
+ * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
+@@ -18,23 +18,27 @@
+ *
+ */
+
+-#include <linux/pci.h>
+-#include <linux/ath9k_platform.h>
++#include <linux/platform_device.h>
++#include <linux/ar8216_platform.h>
+
+-#include "machtypes.h"
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
+ #include "dev-gpio-buttons.h"
++#include "dev-eth.h"
+ #include "dev-leds-gpio.h"
+-#include "dev-spi.h"
++#include "dev-m25p80.h"
+ #include "dev-usb.h"
+ #include "dev-wmac.h"
+-#include "pci.h"
++#include "machtypes.h"
+
+-#define AP136_GPIO_LED_STATUS_RED 14
+-#define AP136_GPIO_LED_STATUS_GREEN 19
+ #define AP136_GPIO_LED_USB 4
+-#define AP136_GPIO_LED_WLAN_2G 13
+ #define AP136_GPIO_LED_WLAN_5G 12
++#define AP136_GPIO_LED_WLAN_2G 13
++#define AP136_GPIO_LED_STATUS_RED 14
+ #define AP136_GPIO_LED_WPS_RED 15
++#define AP136_GPIO_LED_STATUS_GREEN 19
+ #define AP136_GPIO_LED_WPS_GREEN 20
+
+ #define AP136_GPIO_BTN_WPS 16
+@@ -43,8 +47,10 @@
+ #define AP136_KEYS_POLL_INTERVAL 20 /* msecs */
+ #define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL)
+
+-#define AP136_WMAC_CALDATA_OFFSET 0x1000
+-#define AP136_PCIE_CALDATA_OFFSET 0x5000
++#define AP136_MAC0_OFFSET 0
++#define AP136_MAC1_OFFSET 6
++#define AP136_WMAC_CALDATA_OFFSET 0x1000
++#define AP136_PCIE_CALDATA_OFFSET 0x5000
+
+ static struct gpio_led ap136_leds_gpio[] __initdata = {
+ {
+@@ -98,63 +104,82 @@ static struct gpio_keys_button ap136_gpi
+ },
+ };
+
+-static struct ath79_spi_controller_data ap136_spi0_data = {
+- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+- .cs_line = 0,
++static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg = {
++ .mode = AR8327_PAD_MAC_RGMII,
++ .txclk_delay_en = true,
++ .rxclk_delay_en = true,
++ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+ };
+
+-static struct spi_board_info ap136_spi_info[] = {
+- {
+- .bus_num = 0,
+- .chip_select = 0,
+- .max_speed_hz = 25000000,
+- .modalias = "mx25l6405d",
+- .controller_data = &ap136_spi0_data,
++static struct ar8327_platform_data ap136_ar8327_data = {
++ .pad0_cfg = &ap136_ar8327_pad0_cfg,
++ .cpuport_cfg = {
++ .force_link = 1,
++ .speed = AR8327_PORT_SPEED_1000,
++ .duplex = 1,
++ .txpause = 1,
++ .rxpause = 1,
+ }
+ };
+
+-static struct ath79_spi_platform_data ap136_spi_data = {
+- .bus_num = 0,
+- .num_chipselect = 1,
++static struct mdio_board_info ap136_mdio0_info[] = {
++ {
++ .bus_id = "ag71xx-mdio.0",
++ .phy_addr = 0,
++ .platform_data = &ap136_ar8327_data,
++ },
+ };
+
+-#ifdef CONFIG_PCI
+-static struct ath9k_platform_data ap136_ath9k_data;
+-
+-static int ap136_pci_plat_dev_init(struct pci_dev *dev)
++static void __init ap136_gmac_setup(void)
+ {
+- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
+- dev->dev.platform_data = &ap136_ath9k_data;
++ void __iomem *base;
++ u32 t;
+
+- return 0;
+-}
++ base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
+
+-static void __init ap136_pci_init(u8 *eeprom)
+-{
+- memcpy(ap136_ath9k_data.eeprom_data, eeprom,
+- sizeof(ap136_ath9k_data.eeprom_data));
++ t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG);
++
++ t &= ~(QCA955X_ETH_CFG_RGMII_GMAC0 | QCA955X_ETH_CFG_SGMII_GMAC0);
++ t |= QCA955X_ETH_CFG_RGMII_GMAC0;
+
+- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
+- ath79_register_pci();
++ __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
++
++ iounmap(base);
+ }
+-#else
+-static inline void ap136_pci_init(void) {}
+-#endif /* CONFIG_PCI */
+
+ static void __init ap136_setup(void)
+ {
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
++ ath79_register_m25p80(NULL);
++
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
+ ap136_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap136_gpio_keys),
+ ap136_gpio_keys);
+- ath79_register_spi(&ap136_spi_data, ap136_spi_info,
+- ARRAY_SIZE(ap136_spi_info));
++
+ ath79_register_usb();
+- ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
+- ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
++ ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL);
++ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
++
++ ap136_gmac_setup();
++
++ ath79_register_mdio(0, 0x0);
++
++ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0);
++
++ mdiobus_register_board_info(ap136_mdio0_info,
++ ARRAY_SIZE(ap136_mdio0_info));
++
++ /* GMAC0 is connected to an AR8327 switch */
++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++ ath79_eth0_data.phy_mask = BIT(0);
++ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++ ath79_eth0_pll_data.pll_1000 = 0x06000000;
++
++ ath79_register_eth(0);
+ }
+
+ MIPS_MACHINE(ATH79_MACH_AP136, "AP136", "Atheros AP136 reference board",
--- /dev/null
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -16,18 +16,101 @@
+
+ enum ath79_mach_type {
+ ATH79_MACH_GENERIC = 0,
++ ATH79_MACH_ALFA_AP96, /* ALFA Network AP96 board */
++ ATH79_MACH_ALFA_NX, /* ALFA Network N2/N5 board */
++ ATH79_MACH_ALL0258N, /* Allnet ALL0258N */
++ ATH79_MACH_ALL0305, /* Allnet ALL0305 */
++ ATH79_MACH_ALL0315N, /* Allnet ALL0315N */
++ ATH79_MACH_AP113, /* Atheros AP113 reference board */
+ ATH79_MACH_AP121, /* Atheros AP121 reference board */
+ ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
+ ATH79_MACH_AP136, /* Atheros AP136 reference board */
+ ATH79_MACH_AP81, /* Atheros AP81 reference board */
++ ATH79_MACH_AP83, /* Atheros AP83 */
++ ATH79_MACH_AP96, /* Atheros AP96 */
++ ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
+ ATH79_MACH_DB120, /* Atheros DB120 reference board */
+ ATH79_MACH_PB44, /* Atheros PB44 reference board */
++ ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
++ ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
++ ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */
++ ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */
++ ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */
++ ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */
++ ATH79_MACH_EAP7660D, /* Senao EAP7660D */
++ ATH79_MACH_JA76PF, /* jjPlus JA76PF */
++ ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */
++ ATH79_MACH_JWAP003, /* jjPlus JWAP003 */
++ ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */
++ ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */
++ ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */
++ ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */
++ ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */
++ ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */
++ ATH79_MACH_OM2P, /* OpenMesh OM2P */
++ ATH79_MACH_PB42, /* Atheros PB42 */
++ ATH79_MACH_PB92, /* Atheros PB92 */
++ ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */
++ ATH79_MACH_RB_411U, /* MikroTik RouterBOARD 411U */
++ ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */
++ ATH79_MACH_RB_433U, /* MikroTik RouterBOARD 433UAH */
++ ATH79_MACH_RB_450G, /* MikroTik RouterBOARD 450G */
++ ATH79_MACH_RB_450, /* MikroTik RouterBOARD 450 */
++ ATH79_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */
++ ATH79_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */
++ ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */
++ ATH79_MACH_RB_750G_R3, /* MikroTik RouterBOARD 750GL */
++ ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */
++ ATH79_MACH_RB_751G, /* Mikrotik RouterBOARD 751G */
++ ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */
++ ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */
++ ATH79_MACH_RW2458N, /* Redwave RW2458N */
++ ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
++ ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */
++ ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */
++ ATH79_MACH_TL_MR11U, /* TP-LINK TL-MR11U */
++ ATH79_MACH_TL_MR3020, /* TP-LINK TL-MR3020 */
++ ATH79_MACH_TL_MR3040, /* TP-LINK TL-MR3040 */
++ ATH79_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */
++ ATH79_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */
++ ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */
++ ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */
++ ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */
++ ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */
++ ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */
++ ATH79_MACH_TL_WR2543N, /* TP-LINK TL-WR2543N/ND */
++ ATH79_MACH_TL_WR703N, /* TP-LINK TL-WR703N */
++ ATH79_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */
++ ATH79_MACH_TL_WR741ND_V4, /* TP-LINK TL-WR741ND v4*/
++ ATH79_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */
++ ATH79_MACH_TL_WR841N_V7, /* TP-LINK TL-WR841N/ND v7 */
++ ATH79_MACH_TL_WR841N_V8, /* TP-LINK TL-WR841N/ND v8 */
++ ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
+ ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
+ ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
++ ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */
++ ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */
+ ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
+ ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
++ ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */
++ ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */
+ ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */
+ ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
++ ATH79_MACH_WHR_G301N, /* Buffalo WHR-G301N */
++ ATH79_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */
++ ATH79_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */
++ ATH79_MACH_WLAE_AG300N, /* Buffalo WLAE-AG300N */
++ ATH79_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */
++ ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */
++ ATH79_MACH_WP543, /* Compex WP543 */
++ ATH79_MACH_WPE72, /* Compex WPE72 */
++ ATH79_MACH_WRT160NL, /* Linksys WRT160NL */
++ ATH79_MACH_WRT400N, /* Linksys WRT400N */
++ ATH79_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */
++ ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */
++ ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */
++ ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */
++ ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */
+ };
+
+ #endif /* _ATH79_MACHTYPE_H */
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -2,6 +2,61 @@ if ATH79
+
+ menu "Atheros AR71XX/AR724X/AR913X machine selection"
+
++config ATH79_MACH_ALFA_AP96
++ bool "ALFA Network AP96 board support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_SPI
++ select ATH79_DEV_USB
++
++config ATH79_MACH_HORNET_UB
++ bool "ALFA Network Hornet-UB board support"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_ALFA_NX
++ bool "ALFA Network N2/N5 board support"
++ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++
++config ATH79_MACH_ALL0258N
++ bool "Allnet ALL0258N support"
++ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++
++config ATH79_MACH_ALL0315N
++ bool "Allnet ALL0315N support"
++ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++
++config ATH79_MACH_AP113
++ bool "Atheros AP113 board support"
++ select SOC_AR724X
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_PB9X_PCI if PCI
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_USB
++ select ATH79_DEV_ETH
++
+ config ATH79_MACH_AP121
+ bool "Atheros AP121 reference board"
+ select SOC_AR933X
+@@ -40,6 +95,24 @@ config ATH79_MACH_AP81
+ Say 'Y' here if you want your kernel to support the
+ Atheros AP81 reference board.
+
++config ATH79_MACH_AP83
++ bool "Atheros AP83 board support"
++ select SOC_AR913X
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_AP96
++ bool "Atheros AP96 board support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++
+ config ATH79_MACH_DB120
+ bool "Atheros DB120 reference board"
+ select SOC_AR934X
+@@ -55,6 +128,13 @@ config ATH79_MACH_DB120
+ Say 'Y' here if you want your kernel to support the
+ Atheros DB120 reference board.
+
++config ATH79_MACH_PB42
++ bool "Atheros PB42 board support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_M25P80
++
+ config ATH79_MACH_PB44
+ bool "Atheros PB44 reference board"
+ select SOC_AR71XX
+@@ -67,6 +147,456 @@ config ATH79_MACH_PB44
+ Say 'Y' here if you want your kernel to support the
+ Atheros PB44 reference board.
+
++config ATH79_MACH_PB92
++ bool "Atheros PB92 board support"
++ select SOC_AR724X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_PB9X_PCI if PCI
++ select ATH79_DEV_USB
++
++config ATH79_MACH_AW_NR580
++ bool "AzureWave AW-NR580 board support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++
++config ATH79_MACH_WHR_HP_G300N
++ bool "Buffalo WHR-HP-G300N board support"
++ select SOC_AR724X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++
++config ATH79_MACH_WLAE_AG300N
++ bool "Buffalo WLAE-AG300N board support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++
++config ATH79_MACH_WZR_HP_AG300H
++ bool "Buffalo WZR-HP-AG300H board support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++
++config ATH79_MACH_WZR_HP_G300NH
++ bool "Buffalo WZR-HP-G300NH board support"
++ select SOC_AR913X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++ select RTL8366_SMI
++
++config ATH79_MACH_WZR_HP_G300NH2
++ bool "Buffalo WZR-HP-G300NH2 board support"
++ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++
++config ATH79_MACH_WZR_HP_G450H
++ bool "Buffalo WZR-HP-G450H board support"
++ select SOC_AR724X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++
++config ATH79_MACH_WP543
++ bool "Compex WP543/WPJ543 board support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select MYLOADER
++
++config ATH79_MACH_WPE72
++ bool "Compex WPE72/WPE72NX board support"
++ select SOC_AR724X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select MYLOADER
++
++config ATH79_MACH_DIR_600_A1
++ bool "D-Link DIR-600 A1/DIR-615 E4 support"
++ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_NVRAM
++
++config ATH79_MACH_DIR_615_C1
++ bool "D-Link DIR-615 rev. C1 support"
++ select SOC_AR913X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++ select ATH79_NVRAM
++
++config ATH79_MACH_DIR_825_B1
++ bool "D-Link DIR-825 rev. B1 board support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++
++config ATH79_MACH_EW_DORIN
++ bool "embedded wireless Dorin Platform support"
++ select SOC_AR933X
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_WMAC
++ select ATH79_DEV_ETH
++ help
++ Say 'Y' here if you want your kernel to support the
++ Dorin Platform from www.80211.de .
++
++config ATH79_MACH_JA76PF
++ bool "jjPlus JA76PF board support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++
++config ATH79_MACH_JWAP003
++ bool "jjPlus JWAP003 board support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++
++config ATH79_MACH_WRT160NL
++ bool "Linksys WRT160NL board support"
++ select SOC_AR913X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++ select ATH79_NVRAM
++
++config ATH79_MACH_WRT400N
++ bool "Linksys WRT400N board support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++
++config ATH79_MACH_RB4XX
++ bool "MikroTik RouterBOARD 4xx series support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_USB
++
++config ATH79_MACH_RB750
++ bool "MikroTik RouterBOARD 750 support"
++ select SOC_AR724X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_USB
++ select ATH79_ROUTERBOOT
++ select RLE_DECOMPRESS
++
++config ATH79_MACH_RB2011
++ bool "MikroTik RouterBOARD 2011 support"
++ select SOC_AR934x
++ select ATH79_DEV_ETH
++ select ATH79_DEV_NFC
++ select ATH79_DEV_WMAC
++ select ATH79_ROUTERBOOT
++
++config ATH79_MACH_WNDR3700
++ bool "NETGEAR WNDR3700 board support"
++ select SOC_AR71XX
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++
++config ATH79_MACH_WNR2000
++ bool "NETGEAR WNR2000 board support"
++ select SOC_AR913X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_OM2P
++ bool "OpenMesh OM2P board support"
++ select SOC_AR724X
++ select SOC_AR933X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_MZK_W04NU
++ bool "Planex MZK-W04NU board support"
++ select SOC_AR913X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_MZK_W300NH
++ bool "Planex MZK-W300NH board support"
++ select SOC_AR913X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_RW2458N
++ bool "Redwave RW2458N board support"
++ select SOC_AR724X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++
++config ATH79_MACH_EAP7660D
++ bool "Senao EAP7660D support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++
++config ATH79_MACH_TL_MR11U
++ bool "TP-LINK TL-MR11U/TL-MR3040 support"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_MR3020
++ bool "TP-LINK TL-MR3020 support"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_MR3X20
++ bool "TP-LINK TL-MR3220/3420 support"
++ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++
++config ATH79_MACH_TL_WA901ND
++ bool "TP-LINK TL-WA901ND support"
++ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++
++config ATH79_MACH_TL_WA901ND_V2
++ bool "TP-LINK TL-WA901ND v2 support"
++ select SOC_AR913X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WDR4300
++ bool "TP-LINK TL-WDR3600/4300/4310 board support"
++ select SOC_AR934X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR703N
++ bool "TP-LINK TL-WR703N support"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR741ND
++ bool "TP-LINK TL-WR741ND support"
++ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++
++config ATH79_MACH_TL_WR741ND_V4
++ bool "TP-LINK TL-WR741ND v4 support"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR841N_V1
++ bool "TP-LINK TL-WR841N v1 support"
++ select SOC_AR71XX
++ select ATH79_DEV_DSA
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++
++config ATH79_MACH_TL_WR841N_V8
++ bool "TP-LINK TL-WR841N/ND v8 support"
++ select SOC_AR934X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR941ND
++ bool "TP-LINK TL-WR941ND support"
++ select SOC_AR913X
++ select ATH79_DEV_DSA
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR1041N_V2
++ bool "TP-LINK TL-WR1041N v2 support"
++ select SOC_AR934X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR1043ND
++ bool "TP-LINK TL-WR1043ND support"
++ select SOC_AR913X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_TL_WR2543N
++ bool "TP-LINK TL-WR2543N/ND support"
++ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++
++config ATH79_MACH_TEW_632BRP
++ bool "TRENDnet TEW-632BRP support"
++ select SOC_AR913X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++ select ATH79_NVRAM
++
++config ATH79_MACH_TEW_673GRU
++ bool "TRENDnet TEW-673GRU support"
++ select SOC_AR71XX
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_NVRAM
++
++config ATH79_MACH_TEW_712BR
++ bool "TRENDnet TEW-712BR support"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++ select ATH79_NVRAM
++
++config ATH79_MACH_UBNT
++ bool "Ubiquiti AR71xx based boards support"
++ select SOC_AR71XX
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++
+ config ATH79_MACH_UBNT_XM
+ bool "Ubiquiti Networks XM (rev 1.0) board"
+ select SOC_AR724X
+@@ -80,6 +610,24 @@ config ATH79_MACH_UBNT_XM
+ Say 'Y' here if you want your kernel to support the
+ Ubiquiti Networks XM (rev 1.0) board.
+
++config ATH79_MACH_ZCN_1523H
++ bool "Zcomax ZCN-1523H support"
++ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++
++config ATH79_MACH_NBG460N
++ bool "Zyxel NBG460N/550N/550NH board support"
++ select SOC_AR913X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
+ endmenu
+
+ config SOC_AR71XX
+@@ -115,10 +663,6 @@ config SOC_QCA955X
+ select PCI_AR724X if PCI
+ def_bool n
+
+-config ATH79_DEV_M25P80
+- select ATH79_DEV_SPI
+- def_bool n
+-
+ config ATH79_DEV_AP9X_PCI
+ select ATH79_PCI_ATH9K_FIXUP
+ def_bool n
+@@ -129,7 +673,14 @@ config ATH79_DEV_DSA
+ config ATH79_DEV_ETH
+ def_bool n
+
+-config PCI_AR724X
++config ATH79_DEV_M25P80
++ select ATH79_DEV_SPI
++ def_bool n
++
++config ATH79_DEV_DSA
++ def_bool n
++
++config ATH79_DEV_ETH
+ def_bool n
+
+ config ATH79_DEV_GPIO_BUTTONS
+@@ -161,4 +712,7 @@ config ATH79_PCI_ATH9K_FIXUP
+ config ATH79_ROUTERBOOT
+ def_bool n
+
++config PCI_AR724X
++ def_bool n
++
+ endif
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -38,9 +38,66 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
+ #
+ # Machines
+ #
++obj-$(CONFIG_ATH79_MACH_ALFA_AP96) += mach-alfa-ap96.o
++obj-$(CONFIG_ATH79_MACH_ALFA_NX) += mach-alfa-nx.o
++obj-$(CONFIG_ATH79_MACH_ALL0258N) += mach-all0258n.o
++obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o
++obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o
+ obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
+ obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o
+ obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
++obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o
++obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
++obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
+ obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
++obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
++obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o
++obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o
++obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o
++obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
++obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
++obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
++obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
++obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o
++obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o
++obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o
++obj-$(CONFIG_ATH79_MACH_OM2P) += mach-om2p.o
++obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o
+ obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
++obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o
++obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o
++obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o
++obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o
++obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
++obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o
++obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o
++obj-$(CONFIG_ATH79_MACH_TEW_712BR) += mach-tew-712br.o
++obj-$(CONFIG_ATH79_MACH_TL_MR11U) += mach-tl-mr11u.o
++obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o
++obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o
++obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o
++obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o
++obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += mach-tl-wr741nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o
++obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o
++obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o
++obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o
++obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WR2543N) += mach-tl-wr2543n.o
++obj-$(CONFIG_ATH79_MACH_TL_WR703N) += mach-tl-wr703n.o
++obj-$(CONFIG_ATH79_MACH_UBNT) += mach-ubnt.o
+ obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
++obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o
++obj-$(CONFIG_ATH79_MACH_WLAE_AG300N) += mach-wlae-ag300n.o
++obj-$(CONFIG_ATH79_MACH_WNDR3700) += mach-wndr3700.o
++obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o
++obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
++obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
++obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o
++obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o
++obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o
++obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o
++obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o
++obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o
+--- a/arch/mips/ath79/prom.c
++++ b/arch/mips/ath79/prom.c
+@@ -180,6 +180,10 @@ void __init prom_init(void)
+ ath79_prom_append_cmdline("board", env);
+ }
+ }
++
++ if (strstr(arcs_cmdline, "board=750Gr3") ||
++ strstr(arcs_cmdline, "board=2011L"))
++ ath79_prom_append_cmdline("console", "ttyS0,115200");
+ }
+
+ void __init prom_free_prom_memory(void)
--- /dev/null
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -403,6 +403,16 @@ config ATH79_MACH_RW2458N
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
++config ATH79_MACH_CAP4200AG
++ bool "Senao CAP4200AG support"
++ select SOC_AR934X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
+ config ATH79_MACH_EAP7660D
+ bool "Senao EAP7660D support"
+ select SOC_AR71XX
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -29,6 +29,7 @@ enum ath79_mach_type {
+ ATH79_MACH_AP83, /* Atheros AP83 */
+ ATH79_MACH_AP96, /* Atheros AP96 */
+ ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
++ ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
+ ATH79_MACH_DB120, /* Atheros DB120 reference board */
+ ATH79_MACH_PB44, /* Atheros PB44 reference board */
+ ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -49,6 +49,7 @@ obj-$(CONFIG_ATH79_MACH_AP81) += mach-a
+ obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o
+ obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
+ obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
++obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
+ obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
+ obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
+ obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o
--- /dev/null
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -139,6 +139,137 @@ static void qca955x_wmac_setup(void)
+ ath79_wmac_data.is_clk_25mhz = true;
+ }
+
++static bool __init
++ar93xx_wmac_otp_read_word(void __iomem *base, int addr, u32 *data)
++{
++ int timeout = 1000;
++ u32 val;
++
++ __raw_readl(base + AR9300_OTP_BASE + (4 * addr));
++ while (timeout--) {
++ val = __raw_readl(base + AR9300_OTP_STATUS);
++ if ((val & AR9300_OTP_STATUS_TYPE) == AR9300_OTP_STATUS_VALID)
++ break;
++
++ udelay(10);
++ }
++
++ if (!timeout)
++ return false;
++
++ *data = __raw_readl(base + AR9300_OTP_READ_DATA);
++ return true;
++}
++
++static bool __init
++ar93xx_wmac_otp_read(void __iomem *base, int addr, u8 *dest, int len)
++{
++ u32 data;
++ int i;
++
++ for (i = 0; i < len; i++) {
++ int offset = 8 * ((addr - i) % 4);
++
++ if (!ar93xx_wmac_otp_read_word(base, (addr - i) / 4, &data))
++ return false;
++
++ dest[i] = (data >> offset) & 0xff;
++ }
++
++ return true;
++}
++
++static bool __init
++ar93xx_wmac_otp_uncompress(void __iomem *base, int addr, int len, u8 *dest,
++ int dest_start, int dest_len)
++{
++ int dest_bytes = 0;
++ int offset = 0;
++ int end = addr - len;
++ u8 hdr[2];
++
++ while (addr > end) {
++ if (!ar93xx_wmac_otp_read(base, addr, hdr, 2))
++ return false;
++
++ addr -= 2;
++ offset += hdr[0];
++
++ if (offset <= dest_start + dest_len &&
++ offset + len >= dest_start) {
++ int data_offset = 0;
++ int dest_offset = 0;
++ int copy_len;
++
++ if (offset < dest_start)
++ data_offset = dest_start - offset;
++ else
++ dest_offset = offset - dest_start;
++
++ copy_len = len - data_offset;
++ if (copy_len > dest_len - dest_offset)
++ copy_len = dest_len - dest_offset;
++
++ ar93xx_wmac_otp_read(base, addr - data_offset,
++ dest + dest_offset,
++ copy_len);
++
++ dest_bytes += copy_len;
++ }
++ addr -= hdr[1];
++ }
++ return !!dest_bytes;
++}
++
++bool __init ar93xx_wmac_read_mac_address(u8 *dest)
++{
++ void __iomem *base;
++ bool ret = false;
++ int addr = 0x1ff;
++ unsigned int len;
++ u32 hdr_u32;
++ u8 *hdr = (u8 *) &hdr_u32;
++ u8 mac[6] = { 0x00, 0x02, 0x03, 0x04, 0x05, 0x06 };
++ int mac_start = 2, mac_end = 8;
++
++ BUG_ON(!soc_is_ar933x() && !soc_is_ar934x());
++ base = ioremap_nocache(AR933X_WMAC_BASE, AR933X_WMAC_SIZE);
++ while (addr > sizeof(hdr)) {
++ if (!ar93xx_wmac_otp_read(base, addr, hdr, sizeof(hdr)))
++ break;
++
++ if (hdr_u32 == 0 || hdr_u32 == ~0)
++ break;
++
++ len = (hdr[1] << 4) | (hdr[2] >> 4);
++ addr -= 4;
++
++ switch (hdr[0] >> 5) {
++ case 0:
++ if (len < mac_end)
++ break;
++
++ ar93xx_wmac_otp_read(base, addr - mac_start, mac, 6);
++ ret = true;
++ break;
++ case 3:
++ ret |= ar93xx_wmac_otp_uncompress(base, addr, len, mac,
++ mac_start, 6);
++ break;
++ default:
++ break;
++ }
++
++ addr -= len + 2;
++ }
++
++ iounmap(base);
++ if (ret)
++ memcpy(dest, mac, 6);
++
++ return ret;
++}
++
+ void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
+ {
+ if (soc_is_ar913x())
+--- a/arch/mips/ath79/dev-wmac.h
++++ b/arch/mips/ath79/dev-wmac.h
+@@ -13,5 +13,6 @@
+ #define _ATH79_DEV_WMAC_H
+
+ void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
++bool ar93xx_wmac_read_mac_address(u8 *dest);
+
+ #endif /* _ATH79_DEV_WMAC_H */
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -129,6 +129,14 @@
+ #define QCA955X_NFC_BASE 0x1b000200
+ #define QCA955X_NFC_SIZE 0xb8
+
++#define AR9300_OTP_BASE 0x14000
++#define AR9300_OTP_STATUS 0x15f18
++#define AR9300_OTP_STATUS_TYPE 0x7
++#define AR9300_OTP_STATUS_VALID 0x4
++#define AR9300_OTP_STATUS_ACCESS_BUSY 0x2
++#define AR9300_OTP_STATUS_SM_BUSY 0x1
++#define AR9300_OTP_READ_DATA 0x15f1c
++
+ /*
+ * DDR_CTRL block
+ */
--- /dev/null
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -270,6 +270,16 @@ bool __init ar93xx_wmac_read_mac_address
+ return ret;
+ }
+
++void __init ath79_wmac_disable_2ghz(void)
++{
++ ath79_wmac_data.disable_2ghz = true;
++}
++
++void __init ath79_wmac_disable_5ghz(void)
++{
++ ath79_wmac_data.disable_5ghz = true;
++}
++
+ void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
+ {
+ if (soc_is_ar913x())
+--- a/arch/mips/ath79/dev-wmac.h
++++ b/arch/mips/ath79/dev-wmac.h
+@@ -13,6 +13,9 @@
+ #define _ATH79_DEV_WMAC_H
+
+ void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
++void ath79_wmac_disable_2ghz(void);
++void ath79_wmac_disable_5ghz(void);
++
+ bool ar93xx_wmac_read_mac_address(u8 *dest);
+
+ #endif /* _ATH79_DEV_WMAC_H */
--- /dev/null
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -67,10 +67,27 @@ static void __init ar913x_wmac_setup(voi
+
+ static int ar933x_wmac_reset(void)
+ {
++ int retries = 20;
++
+ ath79_device_reset_set(AR933X_RESET_WMAC);
+ ath79_device_reset_clear(AR933X_RESET_WMAC);
+
+- return 0;
++ while (1) {
++ u32 bootstrap;
++
++ bootstrap = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
++ if ((bootstrap & AR933X_BOOTSTRAP_EEPBUSY) == 0)
++ return 0;
++
++ if (retries-- == 0)
++ break;
++
++ udelay(10000);
++ retries++;
++ }
++
++ pr_err("ar933x: WMAC reset timed out");
++ return -ETIMEDOUT;
+ }
+
+ static int ar933x_r1_get_wmac_revision(void)
--- /dev/null
+--- a/drivers/net/phy/mdio-bitbang.c
++++ b/drivers/net/phy/mdio-bitbang.c
+@@ -165,16 +165,7 @@ static int mdiobb_read(struct mii_bus *b
+
+ ctrl->ops->set_mdio_dir(ctrl, 0);
+
+- /* check the turnaround bit: the PHY should be driving it to zero */
+- if (mdiobb_get_bit(ctrl) != 0) {
+- /* PHY didn't drive TA low -- flush any bits it
+- * may be trying to send.
+- */
+- for (i = 0; i < 32; i++)
+- mdiobb_get_bit(ctrl);
+-
+- return 0xffff;
+- }
++ mdiobb_get_bit(ctrl);
+
+ ret = mdiobb_get_num(ctrl, 16);
+ mdiobb_get_bit(ctrl);
--- /dev/null
+--- a/arch/mips/include/asm/checksum.h
++++ b/arch/mips/include/asm/checksum.h
+@@ -12,6 +12,7 @@
+ #define _ASM_CHECKSUM_H
+
+ #include <linux/in6.h>
++#include <linux/unaligned/packed_struct.h>
+
+ #include <asm/uaccess.h>
+
+@@ -104,26 +105,30 @@ static inline __sum16 ip_fast_csum(const
+ const unsigned int *stop = word + ihl;
+ unsigned int csum;
+ int carry;
++ unsigned int w;
+
+- csum = word[0];
+- csum += word[1];
+- carry = (csum < word[1]);
++ csum = __get_unaligned_cpu32(word++);
++
++ w = __get_unaligned_cpu32(word++);
++ csum += w;
++ carry = (csum < w);
+ csum += carry;
+
+- csum += word[2];
+- carry = (csum < word[2]);
++ w = __get_unaligned_cpu32(word++);
++ csum += w;
++ carry = (csum < w);
+ csum += carry;
+
+- csum += word[3];
+- carry = (csum < word[3]);
++ w = __get_unaligned_cpu32(word++);
++ csum += w;
++ carry = (csum < w);
+ csum += carry;
+
+- word += 4;
+ do {
+- csum += *word;
+- carry = (csum < *word);
++ w = __get_unaligned_cpu32(word++);
++ csum += w;
++ carry = (csum < w);
+ csum += carry;
+- word++;
+ } while (word != stop);
+
+ return csum_fold(csum);
+--- a/include/linux/ip.h
++++ b/include/linux/ip.h
+@@ -102,7 +102,7 @@ struct iphdr {
+ __be32 saddr;
+ __be32 daddr;
+ /*The options start here. */
+-};
++} __packed;
+
+ #ifdef __KERNEL__
+ #include <linux/skbuff.h>
+--- a/include/linux/ipv6.h
++++ b/include/linux/ipv6.h
+@@ -126,7 +126,7 @@ struct ipv6hdr {
+
+ struct in6_addr saddr;
+ struct in6_addr daddr;
+-};
++} __packed;
+
+ #ifdef __KERNEL__
+ /*
+--- a/include/linux/tcp.h
++++ b/include/linux/tcp.h
+@@ -54,7 +54,7 @@ struct tcphdr {
+ __be16 window;
+ __sum16 check;
+ __be16 urg_ptr;
+-};
++} __packed;
+
+ /*
+ * The union cast uses a gcc extension to avoid aliasing problems
+--- a/include/linux/udp.h
++++ b/include/linux/udp.h
+@@ -24,7 +24,7 @@ struct udphdr {
+ __be16 dest;
+ __be16 len;
+ __sum16 check;
+-};
++} __packed;
+
+ /* UDP socket options */
+ #define UDP_CORK 1 /* Never send partially complete segments */
+--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
++++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
+@@ -14,6 +14,7 @@
+ #include <linux/skbuff.h>
+ #include <linux/icmp.h>
+ #include <linux/sysctl.h>
++#include <linux/unaligned/packed_struct.h>
+ #include <net/route.h>
+ #include <net/ip.h>
+
+@@ -44,8 +45,8 @@ static bool ipv4_pkt_to_tuple(const stru
+ if (ap == NULL)
+ return false;
+
+- tuple->src.u3.ip = ap[0];
+- tuple->dst.u3.ip = ap[1];
++ tuple->src.u3.ip = __get_unaligned_cpu32(ap++);
++ tuple->dst.u3.ip = __get_unaligned_cpu32(ap);
+
+ return true;
+ }
projects / openwrt / staging / luka.git / commitdiff