LINUX_VERSION-3.18 = .71
LINUX_VERSION-4.9 = .119
-LINUX_VERSION-4.14 = .62
+LINUX_VERSION-4.14 = .63
LINUX_KERNEL_HASH-3.18.71 = 5abc9778ad44ce02ed6c8ab52ece8a21c6d20d21f6ed8a19287b4a38a50c1240
LINUX_KERNEL_HASH-4.9.119 = 49e17f01a1a607b4b1ab28dc7177e103943151866c3956fd83edc8a4aae60b35
-LINUX_KERNEL_HASH-4.14.62 = 51ca4d7e8ee156dc0f19bc7768915cfae41dbb0b4f251e4fa8b178c5674c22ab
+LINUX_KERNEL_HASH-4.14.63 = cd2e52f0e7ba861afa91cf487b2f45e5174115870f256a1d65996647b7bcc6d3
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))
+++ /dev/null
-From 069f05346d01e7298939f16533953cdf52370be3 Mon Sep 17 00:00:00 2001
-From: Fabio Estevam <fabio.estevam@nxp.com>
-Date: Fri, 5 Jan 2018 18:02:55 -0200
-Subject: [PATCH 6/7] mtd: nand: qcom: Add a NULL check for devm_kasprintf()
-
-devm_kasprintf() may fail, so we should better add a NULL check
-and propagate an error on failure.
-
-Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
-Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
----
- drivers/mtd/nand/qcom_nandc.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/mtd/nand/qcom_nandc.c
-+++ b/drivers/mtd/nand/qcom_nandc.c
-@@ -2639,6 +2639,9 @@ static int qcom_nand_host_init(struct qc
-
- nand_set_flash_node(chip, dn);
- mtd->name = devm_kasprintf(dev, GFP_KERNEL, "qcom_nand.%d", host->cs);
-+ if (!mtd->name)
-+ return -ENOMEM;
-+
- mtd->owner = THIS_MODULE;
- mtd->dev.parent = dev;
-
#define U3P_U3_CHIP_GPIO_CTLD 0x0c
#define P3C_REG_IP_SW_RST BIT(31)
-@@ -585,6 +587,31 @@ static void u2_phy_instance_exit(struct
+@@ -580,6 +582,31 @@ static void u2_phy_instance_exit(struct
}
}
static void pcie_phy_instance_init(struct mtk_tphy *tphy,
struct mtk_phy_instance *instance)
{
-@@ -881,6 +908,17 @@ static int mtk_phy_exit(struct phy *phy)
+@@ -876,6 +903,17 @@ static int mtk_phy_exit(struct phy *phy)
return 0;
}
static struct phy *mtk_phy_xlate(struct device *dev,
struct of_phandle_args *args)
{
-@@ -931,6 +969,7 @@ static const struct phy_ops mtk_tphy_ops
+@@ -926,6 +964,7 @@ static const struct phy_ops mtk_tphy_ops
.exit = mtk_phy_exit,
.power_on = mtk_phy_power_on,
.power_off = mtk_phy_power_off,
+++ /dev/null
-From dacdae142ffd909ed6718adb05af74ff800da668 Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Thu, 7 Dec 2017 19:53:34 +0800
-Subject: [PATCH 177/224] phy: phy-mtk-tphy: use auto instead of force to
- bypass utmi signals
-
-When system is running, if usb2 phy is forced to bypass utmi signals,
-all PLL will be turned off, and it can't detect device connection
-anymore, so replace force mode with auto mode which can bypass utmi
-signals automatically if no device attached for normal flow.
-But keep the force mode to fix RX sensitivity degradation issue.
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- drivers/phy/mediatek/phy-mtk-tphy.c | 19 +++++++------------
- 1 file changed, 7 insertions(+), 12 deletions(-)
-
---- a/drivers/phy/mediatek/phy-mtk-tphy.c
-+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
-@@ -440,9 +440,9 @@ static void u2_phy_instance_init(struct
- u32 index = instance->index;
- u32 tmp;
-
-- /* switch to USB function. (system register, force ip into usb mode) */
-+ /* switch to USB function, and enable usb pll */
- tmp = readl(com + U3P_U2PHYDTM0);
-- tmp &= ~P2C_FORCE_UART_EN;
-+ tmp &= ~(P2C_FORCE_UART_EN | P2C_FORCE_SUSPENDM);
- tmp |= P2C_RG_XCVRSEL_VAL(1) | P2C_RG_DATAIN_VAL(0);
- writel(tmp, com + U3P_U2PHYDTM0);
-
-@@ -502,10 +502,8 @@ static void u2_phy_instance_power_on(str
- u32 index = instance->index;
- u32 tmp;
-
-- /* (force_suspendm=0) (let suspendm=1, enable usb 480MHz pll) */
- tmp = readl(com + U3P_U2PHYDTM0);
-- tmp &= ~(P2C_FORCE_SUSPENDM | P2C_RG_XCVRSEL);
-- tmp &= ~(P2C_RG_DATAIN | P2C_DTM0_PART_MASK);
-+ tmp &= ~(P2C_RG_XCVRSEL | P2C_RG_DATAIN | P2C_DTM0_PART_MASK);
- writel(tmp, com + U3P_U2PHYDTM0);
-
- /* OTG Enable */
-@@ -540,7 +538,6 @@ static void u2_phy_instance_power_off(st
-
- tmp = readl(com + U3P_U2PHYDTM0);
- tmp &= ~(P2C_RG_XCVRSEL | P2C_RG_DATAIN);
-- tmp |= P2C_FORCE_SUSPENDM;
- writel(tmp, com + U3P_U2PHYDTM0);
-
- /* OTG Disable */
-@@ -548,18 +545,16 @@ static void u2_phy_instance_power_off(st
- tmp &= ~PA6_RG_U2_OTG_VBUSCMP_EN;
- writel(tmp, com + U3P_USBPHYACR6);
-
-- /* let suspendm=0, set utmi into analog power down */
-- tmp = readl(com + U3P_U2PHYDTM0);
-- tmp &= ~P2C_RG_SUSPENDM;
-- writel(tmp, com + U3P_U2PHYDTM0);
-- udelay(1);
--
- tmp = readl(com + U3P_U2PHYDTM1);
- tmp &= ~(P2C_RG_VBUSVALID | P2C_RG_AVALID);
- tmp |= P2C_RG_SESSEND;
- writel(tmp, com + U3P_U2PHYDTM1);
-
- if (tphy->pdata->avoid_rx_sen_degradation && index) {
-+ tmp = readl(com + U3P_U2PHYDTM0);
-+ tmp &= ~(P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM);
-+ writel(tmp, com + U3P_U2PHYDTM0);
-+
- tmp = readl(com + U3D_U2PHYDCR0);
- tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
- writel(tmp, com + U3D_U2PHYDCR0);