smsc911x: replace manual phy lookup.

Use phy_find_first() function instead of manual lookup.

Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Reviewed-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index 3c1f9aa84cf5e4d2f97649b6798efa828c87b3ac..13c0b76dec419ddc4a1ae71ad90232d1f6853f1a 100644 (file)
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -770,29 +770,25 @@ static int smsc911x_mii_probe(struct net_device *dev)
 {
        struct smsc911x_data *pdata = netdev_priv(dev);
        struct phy_device *phydev = NULL;
-       int phy_addr;
+       int ret;
 
        /* find the first phy */
-       for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
-               if (pdata->mii_bus->phy_map[phy_addr]) {
-                       phydev = pdata->mii_bus->phy_map[phy_addr];
-                       SMSC_TRACE(PROBE, "PHY %d: addr %d, phy_id 0x%08X",
-                               phy_addr, phydev->addr, phydev->phy_id);
-                       break;
-               }
-       }
-
+       phydev = phy_find_first(pdata->mii_bus);
        if (!phydev) {
                pr_err("%s: no PHY found\n", dev->name);
                return -ENODEV;
        }
 
-       phydev = phy_connect(dev, dev_name(&phydev->dev),
-               &smsc911x_phy_adjust_link, 0, pdata->config.phy_interface);
+       SMSC_TRACE(PROBE, "PHY %d: addr %d, phy_id 0x%08X",
+                       phy_addr, phydev->addr, phydev->phy_id);
+
+       ret = phy_connect_direct(dev, phydev,
+                       &smsc911x_phy_adjust_link, 0,
+                       pdata->config.phy_interface);
 
-       if (IS_ERR(phydev)) {
+       if (ret) {
                pr_err("%s: Could not attach to PHY\n", dev->name);
-               return PTR_ERR(phydev);
+               return ret;
        }
 
        pr_info("%s: attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",