ramips: add support for Cudy X6

Specifications:

SoC: MediaTek MT7621
RAM: 256 MB
Flash: 32 MB
WiFi: MediaTek MT7915E
Switch: 1 WAN, 4 LAN (Gigabit)
Ports: 1 USB 3.0
Buttons: Reset, WPS
LEDs: Power, System, Wan, Lan 1-4, WiFi 2.4G, WiFi 5G, WPS, USB
Power: DC 12V 1A tip positive
Installation:

Download and flash the manufacturer's built OpenWRT image available at
http://www.cudytech.com/openwrt_software_download
Install the new OpenWRT image via luci (System -> Backup/Flash firmware)
Be sure to NOT keep settings. The force upgrade may need to be checked
due to differences in router naming conventions.

Recovery:

Loads only signed manufacture firmware due to bootloader RSA verification
serve tftp-recovery image as /recovery.bin on 192.168.1.88/24
connect to any lan ethernet port
power on the device while holding the reset button
wait at least 8 seconds before releasing reset button for image to
download

Signed-off-by: Alessio Prescenzo <alessioprescenzo@gmail.com>
[ensure unique wireless MAC, fix GPIO pingroup]
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 4a8eaa5c7c9235212c4af022c18b2dfbadfe557f)

diff --git a/target/linux/ramips/dts/mt7621_cudy_x6.dts b/target/linux/ramips/dts/mt7621_cudy_x6.dts
new file mode 100644 (file)
index 0000000..ebb2149
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_cudy_x6.dts
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "cudy,x6", "mediatek,mt7621-soc";
+       model = "CUDY X6";
+
+       aliases {
+               led-boot = &led_internet_blue;
+               led-failsafe = &led_internet_blue;
+               led-running = &led_internet_blue;
+               led-upgrade = &led_internet_blue;
+               label-mac-device = &gmac0;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_internet_blue: internet_blue {
+                       label = "blue:internet";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+               };
+
+               internet_red {
+                       label = "red:internet";
+                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <50000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0x1f80000>;
+                       };
+
+                       partition@1fd0000 {
+                               label = "debug";
+                               reg = <0x1fd0000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@1fe0000 {
+                               label = "backup";
+                               reg = <0x1fe0000 0x10000>;
+                               read-only;
+                       };
+
+                       bdinfo: partition@1ff0000 {
+                               label = "bdinfo";
+                               reg = <0x1ff0000 0x10000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie1 {
+       wifi@0,0 {
+               compatible = "mediatek,mt76";
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x0000>;
+       };
+};
+
+&gmac0 {
+       nvmem-cells = <&macaddr_bdinfo_de00>;
+       nvmem-cell-names = "mac-address";
+};
+
+&switch0 {
+       ports {
+               port@0 {
+                       status = "okay";
+                       label = "lan1";
+               };
+
+               port@1 {
+                       status = "okay";
+                       label = "lan2";
+               };
+
+               port@2 {
+                       status = "okay";
+                       label = "lan3";
+               };
+
+               port@3 {
+                       status = "okay";
+                       label = "lan4";
+               };
+
+               port@4 {
+                       status = "okay";
+                       label = "wan";
+                       nvmem-cells = <&macaddr_bdinfo_de00>;
+                       nvmem-cell-names = "mac-address";
+                       mac-address-increment = <1>;
+               };
+       };
+};
+
+&state_default {
+       gpio {
+               groups = "uart3", "jtag";
+               function = "gpio";
+       };
+};
+
+&bdinfo {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_bdinfo_de00: macaddr@de00 {
+               reg = <0xde00 0x6>;
+       };
+};

diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index de9e78a07be064d8c18c58798f403f742e682c2c..bdaeac2cb16e3d27931c0a54d691d834bf274cbb 100644 (file)
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -314,6 +314,16 @@ define Device/cudy_wr2100
 endef
 TARGET_DEVICES += cudy_wr2100
 
+define Device/cudy_x6
+  $(Device/dsa-migration)
+  IMAGE_SIZE := 32256k
+  DEVICE_VENDOR := Cudy
+  DEVICE_MODEL := X6
+  UIMAGE_NAME := R13
+  DEVICE_PACKAGES := kmod-mt7915e
+endef
+TARGET_DEVICES += cudy_x6
+
 define Device/dlink_dir-8xx-a1
   $(Device/dsa-migration)
   IMAGE_SIZE := 16000k

diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index 504dfbc9eebdc967a9ae31c4b3928c1142eb31f6..fae181cfedc20025104f79ba1f8b6f0ce6008e86 100644 (file)
--- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -16,6 +16,10 @@ case "$board" in
                [ "$PHYNBR" = "0" ] && echo -n $hw_mac_addr_ra0 > /sys${DEVPATH}/macaddress
                [ "$PHYNBR" = "1" ] && echo -n $hw_mac_addr_rax0 > /sys${DEVPATH}/macaddress
                ;;
+       cudy,x6)
+               hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
+               macaddr_add $hw_mac_addr "$PHYNBR" > /sys${DEVPATH}/macaddress
+               ;;
        dlink,dir-853-a3)
                [ "$PHYNBR" = "0" ] && \
                        macaddr_setbit_la "$(mtd_get_mac_binary factory 0xe000)" \