for (i = 0; i < ratelen; i++) {
if ((((rate[i]) & 0x7f) != 2) && (((rate[i]) & 0x7f) != 4) &&
(((rate[i]) & 0x7f) != 11) && (((rate[i]) & 0x7f) != 22))
- return false;
+ return false;
}
return true;
for (i = 0; i < (pIE->Length); i++) {
if (i != 2) {
- /* Got the endian issue here. */
+ /* Got the endian issue here. */
pmlmeinfo->HT_caps.u.HT_cap[i] &= (pIE->data[i]);
} else {
/* modify from fw by Thomas 2010/11/17 */
case _RSN_IE_2_:
if ((_rtw_memcmp((pIE->data + 8), RSN_CIPHER_SUITE_CCMP, 4)) ||
(_rtw_memcmp((pIE->data + 12), RSN_CIPHER_SUITE_CCMP, 4)))
- return false;
+ return false;
default:
break;
}
#ifdef CONFIG_88EU_P2P
struct wifidirect_info *pwdinfo = &padapter->wdinfo;
- /* Added by Albert 2011/03/22 */
- /* In the P2P mode, the driver should not support the b mode. */
- /* So, the Tx packet shouldn't use the CCK rate */
+ /* Added by Albert 2011/03/22 */
+ /* In the P2P mode, the driver should not support the b mode. */
+ /* So, the Tx packet shouldn't use the CCK rate */
if (!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
return;
#endif /* CONFIG_88EU_P2P */
_rtw_memset(supported_rates, 0, NDIS_802_11_LENGTH_RATES_EX);
- if ((wirelessmode & WIRELESS_11B) && (wirelessmode == WIRELESS_11B)) {
+ if ((wirelessmode & WIRELESS_11B) && (wirelessmode == WIRELESS_11B))
memcpy(supported_rates, rtw_basic_rate_cck, 4);
- } else if (wirelessmode & WIRELESS_11B) {
+ else if (wirelessmode & WIRELESS_11B)
memcpy(supported_rates, rtw_basic_rate_mix, 7);
- } else {
+ else
memcpy(supported_rates, rtw_basic_rate_ofdm, 3);
- }
+
if (wirelessmode & WIRELESS_11B)
update_mgnt_tx_rate(padapter, IEEE80211_CCK_RATE_1MB);
DBG_88E("link to Airgo Cap\n");
return HT_IOT_PEER_AIRGO;
} else if (_rtw_memcmp(pIE->data, EPIGRAM_OUI, 3)) {
- epigram_vendor_flag = 1;
+ epigram_vendor_flag = 1;
if (ralink_vendor_flag) {
DBG_88E("link to Tenda W311R AP\n");
return HT_IOT_PEER_TENDA;