ath79: ubnt-bullet-m-xw: fix Ethernet PHY traffic

Since commit 6f2e1b7485f0 ("ath79: disable delays on AT803X config init")
Ubiquiti XW boards equipped with AR8035 PHY suffered from lack of
outbound traffic on the Ethernet port. This was caused by the fact, the
U-boot has set this during boot and it wasn't reset by the PHY driver,
and the corresponding setting in device tree was wrong.

Set the 'phy-mode = "rgmii-txid"' at the &eth0, and drop this property
from PHY node, as it is not parsed there. This causes the device to
connect using Ethernet once again.

Fixes: db4b6535f837 ("ath79: Add support for Ubiquity Bullet M (XW)")
Fixes: 6f2e1b7485f0 ("ath79: disable delays on AT803X config init")
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>

diff --git a/target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts b/target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts
index 16d27dc0167ec2d11976e1eb6dc0ce5e12115e5e..ee73428625280ff48b97e55c035cdcc79d976590 100644 (file)
--- a/target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts
+++ b/target/linux/ath79/dts/ar9342_ubnt_bullet-m-xw.dts
@@ -11,7 +11,6 @@
        status = "okay";
 
        phy4: ethernet-phy@4 {
-               phy-mode = "rgmii";
                reg = <4>;
                max-speed = <100>;
        };
@@ -20,7 +19,7 @@
 &eth0 {
        status = "okay";
 
-       phy-mode = "rgmii";
+       phy-mode = "rgmii-txid";
        phy-handle = <&phy4>;
 
        gmac-config {