LINUX_RELEASE?=1
-LINUX_VERSION-3.18 = .71
LINUX_VERSION-4.4 = .121
LINUX_VERSION-4.9 = .117
LINUX_VERSION-4.14 = .60
-LINUX_KERNEL_HASH-3.18.71 = 5abc9778ad44ce02ed6c8ab52ece8a21c6d20d21f6ed8a19287b4a38a50c1240
LINUX_KERNEL_HASH-4.4.121 = 44a88268b5088dc326b30c9b9133ac35a9a200b636b7268d08f32abeae6ca729
LINUX_KERNEL_HASH-4.9.117 = 8232ea326ac5784d71baa09c0cd7806a2674f8449c0be73e2ae341e6880279b0
LINUX_KERNEL_HASH-4.14.60 = 6ce143258fba2e1f543ff56802e047d7d3a741f746b9c947dd088d4a2873b295
endif
endif
-ifneq ($(filter 3.18 4.4 4.9,$(KERNEL_PATCHVER)),)
+ifneq ($(filter 4.4 4.9,$(KERNEL_PATCHVER)),)
DEFAULT_PACKAGES.router:=$(filter-out kmod-ipt-offload,$(DEFAULT_PACKAGES.router))
endif
+++ /dev/null
-CONFIG_ADM6996_PHY=y
-CONFIG_AR7=y
-CONFIG_AR7_TI=y
-# CONFIG_AR7_TYPE_AC49X is not set
-CONFIG_AR7_TYPE_TI=y
-CONFIG_AR7_WDT=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_BOOT_ELF32=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPMAC=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP17XX_PHY=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_KALLSYMS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIPS=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_AC49X_PARTS is not set
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MVSWITCH_PHY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_EXCEPT_FILL=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_STALL_COMMON is not set
-# CONFIG_SCSI_DMA is not set
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_VLYNQ=y
-# CONFIG_VLYNQ_DEBUG is not set
-CONFIG_ZONE_DMA_FLAG=0
+++ /dev/null
-From 443ab715a40881d6c9ba11b027ba154bac904cb0 Mon Sep 17 00:00:00 2001
-From: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
-Date: Sat, 10 May 2014 23:19:08 +0200
-Subject: [PATCH] MIPS/AR7: ensure that serial ports are properly set up
-
-without UPF_FIXED_TYPE, the data from the PORT_AR7 uart_config entry is
-never copied, resulting in a dead port.
-
-Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
----
- arch/mips/ar7/platform.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/ar7/platform.c
-+++ b/arch/mips/ar7/platform.c
-@@ -581,6 +581,7 @@ static int __init ar7_register_uarts(voi
- uart_port.type = PORT_AR7;
- uart_port.uartclk = clk_get_rate(bus_clk) / 2;
- uart_port.iotype = UPIO_MEM32;
-+ uart_port.flags = UPF_FIXED_TYPE;
- uart_port.regshift = 2;
-
- uart_port.line = 0;
+++ /dev/null
-From ee6c9d41de084b2cefd90e5e0c9f30a35f6d3967 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 29 Oct 2017 15:50:42 +0100
-Subject: [PATCH RFC 3/3] MIPS: AR7: ensure the port type's FCR value is used
-
-Since commit aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt
-trigger I/F of FIFO buffers"), the port's default FCR value isn't used
-in serial8250_do_set_termios anymore, but copied over once in
-serial8250_config_port and then modified as needed.
-
-Unfortunately, serial8250_config_port will never be called if the port
-is shared between kernel and userspace, and the port's flag doesn't have
-UPF_BOOT_AUTOCONF, which would trigger a serial8250_config_port as well.
-
-This causes garbled output from userspace:
-
-[ 5.220000] random: procd urandom read with 49 bits of entropy available
-ers
- [kee
-
-Fix this by forcing it to be configured on boot, resulting in the
-expected output:
-
-[ 5.250000] random: procd urandom read with 50 bits of entropy available
-Press the [f] key and hit [enter] to enter failsafe mode
-Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
-
-Fixes: aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers")
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
-I'm not sure if this is just AR7's issue, or if this points to a general
-issue for UARTs used as kernel console and login console with the "fixed"
-commit.
-
- arch/mips/ar7/platform.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/ar7/platform.c
-+++ b/arch/mips/ar7/platform.c
-@@ -581,7 +581,7 @@ static int __init ar7_register_uarts(voi
- uart_port.type = PORT_AR7;
- uart_port.uartclk = clk_get_rate(bus_clk) / 2;
- uart_port.iotype = UPIO_MEM32;
-- uart_port.flags = UPF_FIXED_TYPE;
-+ uart_port.flags = UPF_FIXED_TYPE | UPF_BOOT_AUTOCONF;
- uart_port.regshift = 2;
-
- uart_port.line = 0;
+++ /dev/null
---- a/arch/mips/include/asm/mach-ar7/spaces.h
-+++ b/arch/mips/include/asm/mach-ar7/spaces.h
-@@ -20,6 +20,8 @@
- #define UNCAC_BASE _AC(0xb4000000, UL) /* 0xa0000000 + PHYS_OFFSET */
- #define IO_BASE UNCAC_BASE
-
-+#define HIGHMEM_START _AC(0x20000000, UL)
-+
- #include <asm/mach-generic/spaces.h>
-
- #endif /* __ASM_AR7_SPACES_H */
+++ /dev/null
-From patchwork Tue Jul 18 10:17:26 2017
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [5/9] MIPS: AR7: allow NULL clock for clk_get_rate
-X-Patchwork-Submitter: Jonas Gorski <jonas.gorski@gmail.com>
-X-Patchwork-Id: 16775
-Message-Id: <20170718101730.2541-6-jonas.gorski@gmail.com>
-To: unlisted-recipients:; (no To-header on input)
-Cc: Ralf Baechle <ralf@linux-mips.org>,
- Paul Gortmaker <paul.gortmaker@windriver.com>,
- James Hogan <james.hogan@imgtec.com>,
- linux-mips@linux-mips.org, linux-kernel@vger.kernel.org
-Date: Tue, 18 Jul 2017 12:17:26 +0200
-From: Jonas Gorski <jonas.gorski@gmail.com>
-List-Id: linux-mips <linux-mips.eddie.linux-mips.org>
-
-Make the behaviour of clk_get_rate consistent with common clk's
-clk_get_rate by accepting NULL clocks as parameter. Some device
-drivers rely on this, and will cause an OOPS otherwise.
-
-Fixes: 780019ddf02f ("MIPS: AR7: Implement clock API")
-Cc: Ralf Baechle <ralf@linux-mips.org>
-Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
-Cc: James Hogan <james.hogan@imgtec.com>
-Cc: linux-mips@linux-mips.org
-Cc: linux-kernel@vger.kernel.org
-Reported-by: Mathias Kresin <dev@kresin.me>
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/ar7/clock.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/arch/mips/ar7/clock.c
-+++ b/arch/mips/ar7/clock.c
-@@ -430,6 +430,9 @@ EXPORT_SYMBOL(clk_disable);
-
- unsigned long clk_get_rate(struct clk *clk)
- {
-+ if (!clk)
-+ return 0;
-+
- return clk->rate;
- }
- EXPORT_SYMBOL(clk_get_rate);
+++ /dev/null
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -12,7 +12,7 @@ obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
--obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
-+obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o titanpart.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
- obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
---- a/arch/mips/ar7/platform.c
-+++ b/arch/mips/ar7/platform.c
-@@ -199,7 +199,7 @@ static struct resource physmap_flash_res
- .name = "mem",
- .flags = IORESOURCE_MEM,
- .start = 0x10000000,
-- .end = 0x107fffff,
-+ .end = 0x11ffffff,
- };
-
- static const char *ar7_probe_types[] = { "ar7part", NULL };
+++ /dev/null
---- a/drivers/vlynq/vlynq.c
-+++ b/drivers/vlynq/vlynq.c
-@@ -119,20 +119,40 @@ static int vlynq_linked(struct vlynq_dev
- return 0;
- }
-
-+static volatile int vlynq_delay_value_new = 0;
-+
-+static void vlynq_delay_wait(u32 count)
-+{
-+ /* Code adopted from original vlynq driver */
-+ int i = 0;
-+ volatile int *ptr = &vlynq_delay_value_new;
-+ *ptr = 0;
-+
-+ /* We are assuming that the each cycle takes about
-+ * 23 assembly instructions. */
-+ for(i = 0; i < (count + 23)/23; i++)
-+ *ptr = *ptr + 1;
-+}
-+
- static void vlynq_reset(struct vlynq_device *dev)
- {
-+ u32 rtm = readl(&dev->local->revision);
-+
-+ rtm = rtm < 0x00010205 || readl(&dev->local->status) & 0x800 == 0 ?
-+ 0 : 0x600000;
-+
- writel(readl(&dev->local->control) | VLYNQ_CTRL_RESET,
- &dev->local->control);
-
- /* Wait for the devices to finish resetting */
-- msleep(5);
-+ vlynq_delay_wait(0xffffff);
-
- /* Remove reset bit */
-- writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET,
-+ writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET | rtm,
- &dev->local->control);
-
- /* Give some time for the devices to settle */
-- msleep(5);
-+ vlynq_delay_wait(0xffffff);
- }
-
- static void vlynq_irq_unmask(struct irq_data *d)
-@@ -379,6 +399,61 @@ void vlynq_unregister_driver(struct vlyn
- }
- EXPORT_SYMBOL(vlynq_unregister_driver);
-
-+enum vlynq_clk_src {
-+ vlynq_clk_external,
-+ vlynq_clk_local,
-+ vlynq_clk_remote,
-+ vlynq_clk_invalid,
-+};
-+
-+static int __vlynq_set_clocks(struct vlynq_device *dev,
-+ enum vlynq_clk_src clk_dir,
-+ int lclk_div, int rclk_div)
-+{
-+ u32 reg;
-+
-+ if (clk_dir == vlynq_clk_invalid) {
-+ printk(KERN_ERR "%s: attempt to set invalid clocking\n",
-+ dev_name(&dev->dev));
-+ return -EINVAL;
-+ }
-+
-+ reg = readl(&dev->local->control);
-+ if (readl(&dev->local->revision) < 0x00010205) {
-+ if (clk_dir & vlynq_clk_local)
-+ reg |= VLYNQ_CTRL_CLOCK_INT;
-+ else
-+ reg &= ~VLYNQ_CTRL_CLOCK_INT;
-+ }
-+ reg &= ~VLYNQ_CTRL_CLOCK_MASK;
-+ reg |= VLYNQ_CTRL_CLOCK_DIV(lclk_div);
-+ writel(reg, &dev->local->control);
-+
-+ if (!vlynq_linked(dev))
-+ return -ENODEV;
-+
-+ printk(KERN_INFO "%s: local VLYNQ protocol rev. is 0x%08x\n",
-+ dev_name(&dev->dev), readl(&dev->local->revision));
-+ printk(KERN_INFO "%s: remote VLYNQ protocol rev. is 0x%08x\n",
-+ dev_name(&dev->dev), readl(&dev->remote->revision));
-+
-+ reg = readl(&dev->remote->control);
-+ if (readl(&dev->remote->revision) < 0x00010205) {
-+ if (clk_dir & vlynq_clk_remote)
-+ reg |= VLYNQ_CTRL_CLOCK_INT;
-+ else
-+ reg &= ~VLYNQ_CTRL_CLOCK_INT;
-+ }
-+ reg &= ~VLYNQ_CTRL_CLOCK_MASK;
-+ reg |= VLYNQ_CTRL_CLOCK_DIV(rclk_div);
-+ writel(reg, &dev->remote->control);
-+
-+ if (!vlynq_linked(dev))
-+ return -ENODEV;
-+
-+ return 0;
-+}
-+
- /*
- * A VLYNQ remote device can clock the VLYNQ bus master
- * using a dedicated clock line. In that case, both the
-@@ -392,29 +467,16 @@ static int __vlynq_try_remote(struct vly
- int i;
-
- vlynq_reset(dev);
-- for (i = dev->dev_id ? vlynq_rdiv2 : vlynq_rdiv8; dev->dev_id ?
-- i <= vlynq_rdiv8 : i >= vlynq_rdiv2;
-- dev->dev_id ? i++ : i--) {
-+ for (i = 0; i <= 7; i++) {
-
- if (!vlynq_linked(dev))
- break;
-
-- writel((readl(&dev->remote->control) &
-- ~VLYNQ_CTRL_CLOCK_MASK) |
-- VLYNQ_CTRL_CLOCK_INT |
-- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
-- &dev->remote->control);
-- writel((readl(&dev->local->control)
-- & ~(VLYNQ_CTRL_CLOCK_INT |
-- VLYNQ_CTRL_CLOCK_MASK)) |
-- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
-- &dev->local->control);
--
-- if (vlynq_linked(dev)) {
-- printk(KERN_DEBUG
-- "%s: using remote clock divisor %d\n",
-- dev_name(&dev->dev), i - vlynq_rdiv1 + 1);
-- dev->divisor = i;
-+ if (!__vlynq_set_clocks(dev, vlynq_clk_remote, i, i)) {
-+ printk(KERN_INFO
-+ "%s: using remote clock divisor %d\n",
-+ dev_name(&dev->dev), i + 1);
-+ dev->divisor = i + vlynq_rdiv1;
- return 0;
- } else {
- vlynq_reset(dev);
-@@ -433,25 +495,17 @@ static int __vlynq_try_remote(struct vly
- */
- static int __vlynq_try_local(struct vlynq_device *dev)
- {
-- int i;
-+ int i, dir = !dev->dev_id;
-
- vlynq_reset(dev);
-
-- for (i = dev->dev_id ? vlynq_ldiv2 : vlynq_ldiv8; dev->dev_id ?
-- i <= vlynq_ldiv8 : i >= vlynq_ldiv2;
-- dev->dev_id ? i++ : i--) {
--
-- writel((readl(&dev->local->control) &
-- ~VLYNQ_CTRL_CLOCK_MASK) |
-- VLYNQ_CTRL_CLOCK_INT |
-- VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1),
-- &dev->local->control);
--
-- if (vlynq_linked(dev)) {
-- printk(KERN_DEBUG
-- "%s: using local clock divisor %d\n",
-- dev_name(&dev->dev), i - vlynq_ldiv1 + 1);
-- dev->divisor = i;
-+ for (i = dir ? 7 : 0; dir ? i >= 0 : i <= 7; dir ? i-- : i++) {
-+
-+ if (!__vlynq_set_clocks(dev, vlynq_clk_local, i, 0)) {
-+ printk(KERN_INFO
-+ "%s: using local clock divisor %d\n",
-+ dev_name(&dev->dev), i + 1);
-+ dev->divisor = i + vlynq_ldiv1;
- return 0;
- } else {
- vlynq_reset(dev);
-@@ -473,18 +527,10 @@ static int __vlynq_try_external(struct v
- if (!vlynq_linked(dev))
- return -ENODEV;
-
-- writel((readl(&dev->remote->control) &
-- ~VLYNQ_CTRL_CLOCK_INT),
-- &dev->remote->control);
--
-- writel((readl(&dev->local->control) &
-- ~VLYNQ_CTRL_CLOCK_INT),
-- &dev->local->control);
--
-- if (vlynq_linked(dev)) {
-- printk(KERN_DEBUG "%s: using external clock\n",
-- dev_name(&dev->dev));
-- dev->divisor = vlynq_div_external;
-+ if (!__vlynq_set_clocks(dev, vlynq_clk_external, 0, 0)) {
-+ printk(KERN_INFO "%s: using external clock\n",
-+ dev_name(&dev->dev));
-+ dev->divisor = vlynq_div_external;
- return 0;
- }
-
-@@ -501,24 +547,16 @@ static int __vlynq_enable_device(struct
- return result;
-
- switch (dev->divisor) {
-- case vlynq_div_external:
- case vlynq_div_auto:
- /* When the device is brought from reset it should have clock
- * generation negotiated by hardware.
- * Check which device is generating clocks and perform setup
- * accordingly */
-- if (vlynq_linked(dev) && readl(&dev->remote->control) &
-- VLYNQ_CTRL_CLOCK_INT) {
-- if (!__vlynq_try_remote(dev) ||
-- !__vlynq_try_local(dev) ||
-- !__vlynq_try_external(dev))
-- return 0;
-- } else {
-- if (!__vlynq_try_external(dev) ||
-- !__vlynq_try_local(dev) ||
-- !__vlynq_try_remote(dev))
-- return 0;
-- }
-+ if (!__vlynq_try_remote(dev) || !__vlynq_try_local(dev))
-+ return 0;
-+ case vlynq_div_external:
-+ if (!__vlynq_try_external(dev))
-+ return 0;
- break;
- case vlynq_ldiv1:
- case vlynq_ldiv2:
-@@ -528,15 +566,12 @@ static int __vlynq_enable_device(struct
- case vlynq_ldiv6:
- case vlynq_ldiv7:
- case vlynq_ldiv8:
-- writel(VLYNQ_CTRL_CLOCK_INT |
-- VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
-- vlynq_ldiv1), &dev->local->control);
-- writel(0, &dev->remote->control);
-- if (vlynq_linked(dev)) {
-- printk(KERN_DEBUG
-- "%s: using local clock divisor %d\n",
-- dev_name(&dev->dev),
-- dev->divisor - vlynq_ldiv1 + 1);
-+ if (!__vlynq_set_clocks(dev, vlynq_clk_local, dev->divisor -
-+ vlynq_ldiv1, 0)) {
-+ printk(KERN_INFO
-+ "%s: using local clock divisor %d\n",
-+ dev_name(&dev->dev),
-+ dev->divisor - vlynq_ldiv1 + 1);
- return 0;
- }
- break;
-@@ -548,20 +583,17 @@ static int __vlynq_enable_device(struct
- case vlynq_rdiv6:
- case vlynq_rdiv7:
- case vlynq_rdiv8:
-- writel(0, &dev->local->control);
-- writel(VLYNQ_CTRL_CLOCK_INT |
-- VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
-- vlynq_rdiv1), &dev->remote->control);
-- if (vlynq_linked(dev)) {
-- printk(KERN_DEBUG
-- "%s: using remote clock divisor %d\n",
-- dev_name(&dev->dev),
-- dev->divisor - vlynq_rdiv1 + 1);
-+ if (!__vlynq_set_clocks(dev, vlynq_clk_remote, 0,
-+ dev->divisor - vlynq_rdiv1)) {
-+ printk(KERN_INFO
-+ "%s: using remote clock divisor %d\n",
-+ dev_name(&dev->dev),
-+ dev->divisor - vlynq_rdiv1 + 1);
- return 0;
- }
- break;
- }
--
-+ vlynq_reset(dev);
- ops->off(dev);
- return -ENODEV;
- }
-@@ -732,14 +764,14 @@ static int vlynq_probe(struct platform_d
- platform_set_drvdata(pdev, dev);
-
- printk(KERN_INFO "%s: regs 0x%p, irq %d, mem 0x%p\n",
-- dev_name(&dev->dev), (void *)dev->regs_start, dev->irq,
-- (void *)dev->mem_start);
-+ dev_name(&dev->dev), (void *)dev->regs_start,
-+ dev->irq, (void *)dev->mem_start);
-
- dev->dev_id = 0;
- dev->divisor = vlynq_div_auto;
-- result = __vlynq_enable_device(dev);
-- if (result == 0) {
-+ if (!__vlynq_enable_device(dev)) {
- dev->dev_id = readl(&dev->remote->chip);
-+ vlynq_reset(dev);
- ((struct plat_vlynq_ops *)(dev->dev.platform_data))->off(dev);
- }
- if (dev->dev_id)
+++ /dev/null
---- a/arch/mips/ar7/memory.c
-+++ b/arch/mips/ar7/memory.c
-@@ -66,5 +66,11 @@ void __init prom_meminit(void)
-
- void __init prom_free_prom_memory(void)
- {
-- /* Nothing to free */
-+ /* adapted from arch/mips/txx9/generic/setup.c */
-+ unsigned long saddr = PHYS_OFFSET + PAGE_SIZE;
-+ unsigned long eaddr = __pa_symbol(&_text);
-+
-+ /* free memory between prom-record and kernel _text base */
-+ if (saddr < eaddr)
-+ free_init_pages("prom memory", saddr, eaddr);
- }
+++ /dev/null
---- a/arch/mips/ar7/Platform
-+++ b/arch/mips/ar7/Platform
-@@ -3,4 +3,9 @@
- #
- platform-$(CONFIG_AR7) += ar7/
- cflags-$(CONFIG_AR7) += -I$(srctree)/arch/mips/include/asm/mach-ar7
--load-$(CONFIG_AR7) += 0xffffffff94100000
-+load-$(CONFIG_AR7_TI) += 0xffffffff94100000
-+
-+#
-+# AudioCodes AC49x
-+#
-+load-$(CONFIG_AR7_AC49X) += 0xffffffff945ca000
---- a/arch/mips/ar7/setup.c
-+++ b/arch/mips/ar7/setup.c
-@@ -69,6 +69,10 @@ const char *get_system_type(void)
- return "TI AR7 (TNETV1056)";
- case TITAN_CHIP_1060:
- return "TI AR7 (TNETV1060)";
-+ case TITAN_CHIP_AC495:
-+ return "AudioCodes AC495";
-+ case TITAN_CHIP_AC496:
-+ return "AudioCodes AC496";
- }
- default:
- return "TI AR7 (unknown)";
---- a/arch/mips/include/asm/mach-ar7/ar7.h
-+++ b/arch/mips/include/asm/mach-ar7/ar7.h
-@@ -92,6 +92,8 @@
- #define TITAN_CHIP_1055 0x0e
- #define TITAN_CHIP_1056 0x0d
- #define TITAN_CHIP_1060 0x07
-+#define TITAN_CHIP_AC495 0x00
-+#define TITAN_CHIP_AC496 0x02
-
- /* Interrupts */
- #define AR7_IRQ_UART0 15
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -94,7 +94,7 @@ config AR7
- select HAVE_CLK
- help
- Support for the Texas Instruments AR7 System-on-a-Chip
-- family: TNETD7100, 7200 and 7300.
-+ family: TI TNETD7100, 7200, 7300 and AudioCodes AC49x.
-
- config ATH79
- bool "Atheros AR71XX/AR724X/AR913X based boards"
-@@ -835,6 +835,7 @@ config MIPS_PARAVIRT
- endchoice
-
- source "arch/mips/alchemy/Kconfig"
-+source "arch/mips/ar7/Kconfig"
- source "arch/mips/ath79/Kconfig"
- source "arch/mips/bcm47xx/Kconfig"
- source "arch/mips/bcm63xx/Kconfig"
---- /dev/null
-+++ b/arch/mips/ar7/Kconfig
-@@ -0,0 +1,26 @@
-+if AR7
-+
-+config AR7_TI
-+ bool
-+
-+config AR7_AC49X
-+ bool
-+
-+choice
-+ prompt "AR7 SoC family selection"
-+ default AR7_TYPE_TI
-+ depends on AR7
-+ help
-+ Select AR7 MIPS SoC implementation.
-+
-+ config AR7_TYPE_TI
-+ bool "Texas Instruments AR7"
-+ select AR7_TI
-+
-+ config AR7_TYPE_AC49X
-+ bool "AudioCodes AC49X"
-+ select AR7_AC49X
-+
-+endchoice
-+
-+endif
+++ /dev/null
---- a/arch/mips/ar7/prom.c
-+++ b/arch/mips/ar7/prom.c
-@@ -70,6 +70,7 @@ struct psbl_rec {
- };
-
- static const char psp_env_version[] __initconst = "TIENV0.8";
-+static const char psp_env_version_ac49x[] __initconst = "MaxENV0.2";
-
- struct psp_env_chunk {
- u8 num;
-@@ -186,7 +187,8 @@ static void __init ar7_init_env(struct e
- struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x14000300));
- void *psp_env = (void *)KSEG1ADDR(psbl->env_base);
-
-- if (strcmp(psp_env, psp_env_version) == 0) {
-+ if (strcmp(psp_env, psp_env_version) == 0 ||
-+ strcmp(psp_env, psp_env_version_ac49x) == 0) {
- parse_psp_env(psp_env);
- } else {
- for (i = 0; i < MAX_ENTRY; i++, env++)
+++ /dev/null
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -164,6 +164,11 @@ config MTD_OF_PARTS
- the partition map from the children of the flash node,
- as described in Documentation/devicetree/booting-without-of.txt.
-
-+config MTD_AC49X_PARTS
-+ tristate "AudioCodes AC49X partitioning support"
-+ ---help---
-+ AudioCodes AC49X partitioning support
-+
- config MTD_AR7_PARTS
- tristate "TI AR7 partitioning support"
- ---help---
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_SPLIT) += mtdsplit/
- obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
-+obj-$(CONFIG_MTD_AC49X_PARTS) += ac49xpart.o
- obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
- obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o titanpart.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
---- a/arch/mips/ar7/platform.c
-+++ b/arch/mips/ar7/platform.c
-@@ -202,7 +202,7 @@ static struct resource physmap_flash_res
- .end = 0x11ffffff,
- };
-
--static const char *ar7_probe_types[] = { "ar7part", NULL };
-+static const char *ar7_probe_types[] = { "ac49xpart", "ar7part", NULL };
-
- static struct physmap_flash_data physmap_flash_data = {
- .width = 2,
+++ /dev/null
---- a/drivers/mtd/ar7part.c
-+++ b/drivers/mtd/ar7part.c
-@@ -30,11 +30,14 @@
-
- #include <uapi/linux/magic.h>
-
-+#include <asm/mach-ar7/prom.h>
-+
- #define AR7_PARTS 4
- #define ROOT_OFFSET 0xe0000
-
- #define LOADER_MAGIC1 le32_to_cpu(0xfeedfa42)
- #define LOADER_MAGIC2 le32_to_cpu(0xfeed1281)
-+#define LOADER_MAGIC3 le32_to_cpu(0x434d4d4c)
-
- struct ar7_bin_rec {
- unsigned int checksum;
-@@ -42,12 +45,16 @@ struct ar7_bin_rec {
- unsigned int address;
- };
-
-+int create_titan_partitions(struct mtd_info *master,
-+ struct mtd_partition **pparts,
-+ struct mtd_part_parser_data *data);
-+
- static int create_mtd_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
- {
- struct ar7_bin_rec header;
-- unsigned int offset;
-+ unsigned int offset, mtd_start, mtd_end;
- size_t len;
- unsigned int pre_size = master->erasesize, post_size = 0;
- unsigned int root_offset = ROOT_OFFSET;
-@@ -55,6 +62,16 @@ static int create_mtd_partitions(struct
- int retries = 10;
- struct mtd_partition *ar7_parts;
-
-+ const char *prom_str = prom_getenv("ProductID");
-+ char mtd_name[] = "mtd1";
-+ if(prom_str &&
-+ (strcmp(prom_str, "CYWL")==0 ||
-+ strcmp(prom_str, "CYWM")==0 ||
-+ strcmp(prom_str, "CYLM")==0 ||
-+ strcmp(prom_str, "CYLL")==0)){
-+ return create_titan_partitions(master, pparts, data);
-+ }
-+
- ar7_parts = kzalloc(sizeof(*ar7_parts) * AR7_PARTS, GFP_KERNEL);
- if (!ar7_parts)
- return -ENOMEM;
-@@ -83,34 +100,39 @@ static int create_mtd_partitions(struct
-
- pre_size = offset;
-
-- if (!ar7_parts[1].offset) {
-- ar7_parts[1].offset = master->size - master->erasesize;
-- post_size = master->erasesize;
-- }
--
- switch (header.checksum) {
-- case LOADER_MAGIC1:
-- while (header.length) {
-- offset += sizeof(header) + header.length;
-- mtd_read(master, offset, sizeof(header), &len,
-- (uint8_t *)&header);
-- }
-- root_offset = offset + sizeof(header) + 4;
-- break;
- case LOADER_MAGIC2:
-+ for (retries = 0; retries <= 9; retries++) {
-+ mtd_name[3] = '0' + retries;
-+ prom_str = prom_getenv(mtd_name);
-+ if (prom_str == NULL)
-+ continue;
-+ sscanf(prom_str, "%i,%i", &mtd_start, &mtd_end);
-+ if (pre_size == (mtd_start & 0x1ffffff)) {
-+ ar7_parts[1].offset = mtd_end &= 0x1ffffff;
-+ ar7_parts[1].size = post_size = master->size - mtd_end;
-+ break;
-+ }
-+ }
-+ case LOADER_MAGIC1:
-+ root_offset = (header.checksum == LOADER_MAGIC1) ? 4 : 0;
- while (header.length) {
- offset += sizeof(header) + header.length;
- mtd_read(master, offset, sizeof(header), &len,
- (uint8_t *)&header);
- }
-- root_offset = offset + sizeof(header) + 4 + 0xff;
-- root_offset &= ~(uint32_t)0xff;
-+ root_offset += offset + sizeof(header);
- break;
- default:
- printk(KERN_WARNING "Unknown magic: %08x\n", header.checksum);
- break;
- }
-
-+ if (!ar7_parts[1].offset) {
-+ post_size = master->erasesize;
-+ ar7_parts[1].offset = master->size - post_size;
-+ }
-+
- mtd_read(master, root_offset, sizeof(header), &len, (u8 *)&header);
- if (header.checksum != SQUASHFS_MAGIC) {
- root_offset += master->erasesize - 1;
---- a/drivers/mtd/titanpart.c
-+++ b/drivers/mtd/titanpart.c
-@@ -149,7 +149,7 @@ static void titan_add_partition(char * e
- }
- int create_titan_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
-- unsigned long origin)
-+ struct mtd_part_parser_data *data)
- {
- struct nsp_img_hdr_head hdr;
- struct nsp_img_hdr_section_info sect_info;
+++ /dev/null
---- a/arch/mips/ar7/platform.c
-+++ b/arch/mips/ar7/platform.c
-@@ -465,31 +465,22 @@ static struct gpio_led fb_fon_leds[] = {
- },
- };
-
--static struct gpio_led gt701_leds[] = {
-+static struct gpio_led actiontec_leds[] = {
- {
- .name = "inet:green",
- .gpio = 13,
-- .active_low = 1,
-- },
-- {
-- .name = "usb",
-- .gpio = 12,
-- .active_low = 1,
- },
- {
- .name = "inet:red",
- .gpio = 9,
-- .active_low = 1,
- },
- {
-- .name = "power:red",
-+ .name = "power:green",
- .gpio = 7,
-- .active_low = 1,
- },
- {
-- .name = "power:green",
-+ .name = "power:red",
- .gpio = 8,
-- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
-@@ -497,6 +488,44 @@ static struct gpio_led gt701_leds[] = {
- .gpio = 10,
- .active_low = 1,
- },
-+ {
-+ .name = "wifi",
-+ .gpio = 6,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "wifi:red",
-+ .gpio = 3,
-+ },
-+ {
-+ .name = "standby",
-+ .gpio = 4,
-+ },
-+ {
-+ .name = "wps",
-+ .gpio = 16,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usb",
-+ .gpio = 12,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "voip",
-+ .gpio = 15,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "line1",
-+ .gpio = 23,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "line2",
-+ .gpio = 25,
-+ .active_low = 1,
-+ },
- };
-
- static struct gpio_led_platform_data ar7_led_data;
-@@ -540,9 +569,9 @@ static void __init detect_leds(void)
- } else if (strstr(prid, "CYWM") || strstr(prid, "CYWL")) {
- ar7_led_data.num_leds = ARRAY_SIZE(titan_leds);
- ar7_led_data.leds = titan_leds;
-- } else if (strstr(prid, "GT701")) {
-- ar7_led_data.num_leds = ARRAY_SIZE(gt701_leds);
-- ar7_led_data.leds = gt701_leds;
-+ } else if (strstr(prid, "GT7") || strstr(prid, "PK5000")) {
-+ ar7_led_data.num_leds = ARRAY_SIZE(actiontec_leds);
-+ ar7_led_data.leds = actiontec_leds;
- }
- }
-
+++ /dev/null
---- a/drivers/net/ethernet/ti/cpmac.c
-+++ b/drivers/net/ethernet/ti/cpmac.c
-@@ -1147,6 +1147,8 @@ static int cpmac_probe(struct platform_d
- goto out;
- }
-
-+ ar7_device_reset(pdata->reset_bit);
-+
- dev->irq = platform_get_irq_byname(pdev, "irq");
-
- dev->netdev_ops = &cpmac_netdev_ops;
-@@ -1228,7 +1230,7 @@ int cpmac_init(void)
- cpmac_mii->reset = cpmac_mdio_reset;
- cpmac_mii->irq = mii_irqs;
-
-- cpmac_mii->priv = ioremap(AR7_REGS_MDIO, 256);
-+ cpmac_mii->priv = ioremap(ar7_is_titan() ? TITAN_REGS_MDIO : AR7_REGS_MDIO, 256);
-
- if (!cpmac_mii->priv) {
- pr_err("Can't ioremap mdio registers\n");
-@@ -1239,10 +1241,16 @@ int cpmac_init(void)
- /* FIXME: unhardcode gpio&reset bits */
- ar7_gpio_disable(26);
- ar7_gpio_disable(27);
-- ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
-- ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
-+
-+ if (!ar7_is_titan()) {
-+ ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
-+ ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
-+ }
- ar7_device_reset(AR7_RESET_BIT_EPHY);
-
-+ if (ar7_is_titan())
-+ ar7_device_reset(TITAN_RESET_BIT_EPHY1);
-+
- cpmac_mii->reset(cpmac_mii);
-
- for (i = 0; i < 300; i++) {
-@@ -1259,7 +1267,11 @@ int cpmac_init(void)
- mask = 0;
- }
-
-- cpmac_mii->phy_mask = ~(mask | 0x80000000);
-+ if (ar7_is_titan())
-+ cpmac_mii->phy_mask = ~(mask | 0x80000000 | 0x40000000);
-+ else
-+ cpmac_mii->phy_mask = ~(mask | 0x80000000);
-+
- snprintf(cpmac_mii->id, MII_BUS_ID_SIZE, "cpmac-1");
-
- res = mdiobus_register(cpmac_mii);
+++ /dev/null
-CONFIG_32BIT=y
-# CONFIG_6LOWPAN is not set
-# CONFIG_6PACK is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_9P_FS is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_AB8500_CORE is not set
-# CONFIG_ABX500_CORE is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_ACENIC is not set
-# CONFIG_ACERHDF is not set
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_ACPI_APEI is not set
-# CONFIG_ACPI_BUTTON is not set
-# CONFIG_ACPI_CUSTOM_METHOD is not set
-# CONFIG_ACPI_EXTLOG is not set
-# CONFIG_ACPI_HED is not set
-# CONFIG_ACPI_INT3403_THERMAL is not set
-# CONFIG_ACPI_POWER_METER is not set
-# CONFIG_ACPI_QUICKSTART is not set
-# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
-# CONFIG_AD2S1200 is not set
-# CONFIG_AD2S1210 is not set
-# CONFIG_AD2S90 is not set
-# CONFIG_AD5064 is not set
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_AD5360 is not set
-# CONFIG_AD5380 is not set
-# CONFIG_AD5421 is not set
-# CONFIG_AD5446 is not set
-# CONFIG_AD5449 is not set
-# CONFIG_AD5504 is not set
-# CONFIG_AD5624R_SPI is not set
-# CONFIG_AD5686 is not set
-# CONFIG_AD5755 is not set
-# CONFIG_AD5764 is not set
-# CONFIG_AD5791 is not set
-# CONFIG_AD5930 is not set
-# CONFIG_AD5933 is not set
-# CONFIG_AD7150 is not set
-# CONFIG_AD7152 is not set
-# CONFIG_AD7192 is not set
-# CONFIG_AD7266 is not set
-# CONFIG_AD7280 is not set
-# CONFIG_AD7291 is not set
-# CONFIG_AD7298 is not set
-# CONFIG_AD7303 is not set
-# CONFIG_AD7476 is not set
-# CONFIG_AD7606 is not set
-# CONFIG_AD7746 is not set
-# CONFIG_AD7780 is not set
-# CONFIG_AD7791 is not set
-# CONFIG_AD7793 is not set
-# CONFIG_AD7816 is not set
-# CONFIG_AD7887 is not set
-# CONFIG_AD7923 is not set
-# CONFIG_AD799X is not set
-# CONFIG_AD8366 is not set
-# CONFIG_AD9523 is not set
-# CONFIG_AD9832 is not set
-# CONFIG_AD9834 is not set
-# CONFIG_AD9850 is not set
-# CONFIG_AD9852 is not set
-# CONFIG_AD9910 is not set
-# CONFIG_AD9951 is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_ADE7753 is not set
-# CONFIG_ADE7754 is not set
-# CONFIG_ADE7758 is not set
-# CONFIG_ADE7759 is not set
-# CONFIG_ADE7854 is not set
-# CONFIG_ADF4350 is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADIS16060 is not set
-# CONFIG_ADIS16080 is not set
-# CONFIG_ADIS16130 is not set
-# CONFIG_ADIS16136 is not set
-# CONFIG_ADIS16201 is not set
-# CONFIG_ADIS16203 is not set
-# CONFIG_ADIS16204 is not set
-# CONFIG_ADIS16209 is not set
-# CONFIG_ADIS16220 is not set
-# CONFIG_ADIS16240 is not set
-# CONFIG_ADIS16255 is not set
-# CONFIG_ADIS16260 is not set
-# CONFIG_ADIS16400 is not set
-# CONFIG_ADIS16480 is not set
-# CONFIG_ADJD_S311 is not set
-# CONFIG_ADM6996_PHY is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_ADT7316 is not set
-CONFIG_ADVISE_SYSCALLS=y
-# CONFIG_ADXRS450 is not set
-CONFIG_AEABI=y
-# CONFIG_AFFS_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_AGP is not set
-# CONFIG_AHCI_MVEBU is not set
-CONFIG_AIO=y
-# CONFIG_AIRO is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_AIX_PARTITION is not set
-# CONFIG_AK09911 is not set
-# CONFIG_AK8975 is not set
-# CONFIG_AL3320A is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-# CONFIG_ALIM7101_WDT is not set
-CONFIG_ALLOW_DEV_COREDUMP=y
-# CONFIG_ALTERA_STAPL is not set
-# CONFIG_ALTERA_TSE is not set
-# CONFIG_ALX is not set
-# CONFIG_AM335X_PHY_USB is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_AMD_PHY is not set
-# CONFIG_AMD_XGBE is not set
-# CONFIG_AMD_XGBE_PHY is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_AMILO_RFKILL is not set
-# CONFIG_ANDROID is not set
-CONFIG_ANON_INODES=y
-# CONFIG_APDS9300 is not set
-# CONFIG_APDS9802ALS is not set
-# CONFIG_APM8018X is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_AR5523 is not set
-# CONFIG_AR7 is not set
-# CONFIG_AR8216_PHY is not set
-# CONFIG_AR8216_PHY_LEDS is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCM is not set
-# CONFIG_ARCH_BCM2835 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_BERLIN is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_EXYNOS is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-# CONFIG_ARCH_HI3xxx is not set
-# CONFIG_ARCH_HIGHBANK is not set
-# CONFIG_ARCH_HISI is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_KEYSTONE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_LPC32XX is not set
-# CONFIG_ARCH_MEDIATEK is not set
-# CONFIG_ARCH_MESON is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_MSM_DT is not set
-# CONFIG_ARCH_MSM_NODT is not set
-# CONFIG_ARCH_MULTIPLATFORM is not set
-# CONFIG_ARCH_MULTI_V6 is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MVEBU is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_MXS is not set
-# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_NSPIRE is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2PLUS is not set
-# CONFIG_ARCH_OMAP3 is not set
-# CONFIG_ARCH_OMAP4 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-# CONFIG_ARCH_PICOXCELL is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PRIMA2 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_QCOM is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_ROCKCHIP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_S3C24XX is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P64X0 is not set
-# CONFIG_ARCH_S5PC100 is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_SHMOBILE_LEGACY is not set
-# CONFIG_ARCH_SHMOBILE_MULTI is not set
-# CONFIG_ARCH_SIRF is not set
-# CONFIG_ARCH_SOCFPGA is not set
-# CONFIG_ARCH_STI is not set
-# CONFIG_ARCH_SUNXI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_ARCH_TCC_926 is not set
-# CONFIG_ARCH_TEGRA is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_VIRT is not set
-# CONFIG_ARCH_VT8500 is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_WM8505 is not set
-# CONFIG_ARCH_WM8850 is not set
-# CONFIG_ARCH_ZYNQ is not set
-# CONFIG_ARCNET is not set
-# CONFIG_ARC_EMAC is not set
-# CONFIG_ARM_APPENDED_DTB is not set
-# CONFIG_ARM_ARCH_TIMER is not set
-# CONFIG_ARM_AT91_ETHER is not set
-# CONFIG_ARM_CCI is not set
-# CONFIG_ARM_CCN is not set
-CONFIG_ARM_CPU_TOPOLOGY=y
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-# CONFIG_ARM_ERRATA_326103 is not set
-# CONFIG_ARM_ERRATA_364296 is not set
-# CONFIG_ARM_ERRATA_411920 is not set
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-# CONFIG_ARM_ERRATA_643719 is not set
-# CONFIG_ARM_ERRATA_720789 is not set
-# CONFIG_ARM_ERRATA_742230 is not set
-# CONFIG_ARM_ERRATA_742231 is not set
-# CONFIG_ARM_ERRATA_743622 is not set
-# CONFIG_ARM_ERRATA_751472 is not set
-# CONFIG_ARM_ERRATA_754322 is not set
-# CONFIG_ARM_ERRATA_754327 is not set
-# CONFIG_ARM_ERRATA_764369 is not set
-# CONFIG_ARM_ERRATA_773022 is not set
-# CONFIG_ARM_ERRATA_775420 is not set
-# CONFIG_ARM_ERRATA_798181 is not set
-# CONFIG_ARM_KPROBES_TEST is not set
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-# CONFIG_ARM_PSCI is not set
-# CONFIG_ARM_PTDUMP is not set
-# CONFIG_ARM_UNWIND is not set
-# CONFIG_ARM_VIRT_EXT is not set
-CONFIG_ARPD=y
-# CONFIG_ARTHUR is not set
-# CONFIG_AS3935 is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_ASYMMETRIC_KEY_TYPE is not set
-# CONFIG_ASYNC_RAID6_TEST is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_AT803X_PHY is not set
-# CONFIG_ATA is not set
-# CONFIG_ATAGS is not set
-CONFIG_ATAGS_PROC=y
-# CONFIG_ATALK is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_ATA_ACPI is not set
-CONFIG_ATA_BMDMA=y
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_ATA_PIIX is not set
-CONFIG_ATA_SFF=y
-# CONFIG_ATA_VERBOSE_ERROR is not set
-# CONFIG_ATH10K is not set
-# CONFIG_ATH5K is not set
-# CONFIG_ATH6KL is not set
-# CONFIG_ATH6K_LEGACY is not set
-# CONFIG_ATH79 is not set
-# CONFIG_ATH9K is not set
-# CONFIG_ATH9K_HTC is not set
-# CONFIG_ATH_CARDS is not set
-# CONFIG_ATH_DEBUG is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1C is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL2 is not set
-# CONFIG_ATM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_ATMEL_PIT is not set
-# CONFIG_ATMEL_PWM is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_BR2684 is not set
-CONFIG_ATM_BR2684_IPFILTER=y
-# CONFIG_ATM_CLIP is not set
-CONFIG_ATM_CLIP_NO_ICMP=y
-# CONFIG_ATM_DRIVERS is not set
-# CONFIG_ATM_DUMMY is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_FORE200E is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_LANE is not set
-# CONFIG_ATM_MPOA is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_SOLOS is not set
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_ATP is not set
-# CONFIG_AUDIT is not set
-# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
-# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_AUTO_ZRELADDR is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_AVERAGE is not set
-# CONFIG_AX25 is not set
-# CONFIG_AX25_DAMA_SLAVE is not set
-# CONFIG_AX88796 is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_B44 is not set
-# CONFIG_BACKLIGHT_BD6107 is not set
-# CONFIG_BACKLIGHT_GPIO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-# CONFIG_BACKLIGHT_LM3630 is not set
-# CONFIG_BACKLIGHT_LM3630A is not set
-# CONFIG_BACKLIGHT_LM3639 is not set
-# CONFIG_BACKLIGHT_LP855X is not set
-# CONFIG_BACKLIGHT_LV5207LP is not set
-# CONFIG_BACKLIGHT_PANDORA is not set
-# CONFIG_BACKLIGHT_SAHARA is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-CONFIG_BASE_FULL=y
-CONFIG_BASE_SMALL=0
-# CONFIG_BATMAN_ADV is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2780 is not set
-# CONFIG_BATTERY_DS2781 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_GOLDFISH is not set
-# CONFIG_BATTERY_MAX17040 is not set
-# CONFIG_BATTERY_MAX17042 is not set
-# CONFIG_BATTERY_SBS is not set
-# CONFIG_BAYCOM_EPP is not set
-# CONFIG_BAYCOM_PAR is not set
-# CONFIG_BAYCOM_SER_FDX is not set
-# CONFIG_BAYCOM_SER_HDX is not set
-# CONFIG_BCACHE is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_BCM63XX_PHY is not set
-# CONFIG_BCM7XXX_PHY is not set
-# CONFIG_BCM87XX_PHY is not set
-# CONFIG_BCMA is not set
-# CONFIG_BCMA_DRIVER_GPIO is not set
-CONFIG_BCMA_POSSIBLE=y
-# CONFIG_BCMGENET is not set
-# CONFIG_BCM_KONA_USB2_PHY is not set
-# CONFIG_BCM_WIMAX is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BE2NET is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_BGMAC is not set
-# CONFIG_BIG_KEYS is not set
-# CONFIG_BIG_LITTLE is not set
-# CONFIG_BINARY_PRINTF is not set
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_BINFMT_SCRIPT=y
-CONFIG_BITREVERSE=y
-# CONFIG_BLK_CMDLINE_PARSER is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_CPQ_DA is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_ATIIXP is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_BSGLIB is not set
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_CS5535 is not set
-# CONFIG_BLK_DEV_CS5536 is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_DELKIN is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_HD is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_IDEACPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDE_AU1XXX is not set
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_NULL_BLK is not set
-# CONFIG_BLK_DEV_NVME is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_RBD is not set
-# CONFIG_BLK_DEV_RSXX is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SKD is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_BLK_DEV_THROTTLING is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_XIP is not set
-CONFIG_BLOCK=y
-# CONFIG_BMA180 is not set
-# CONFIG_BMC150_ACCEL is not set
-# CONFIG_BMG160 is not set
-# CONFIG_BMP085 is not set
-# CONFIG_BMP085_I2C is not set
-# CONFIG_BMP085_SPI is not set
-# CONFIG_BNA is not set
-# CONFIG_BNX2 is not set
-# CONFIG_BNX2X is not set
-# CONFIG_BONDING is not set
-# CONFIG_BOOKE_WDT is not set
-CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT=3
-# CONFIG_BOOT_PRINTK_DELAY is not set
-CONFIG_BOOT_RAW=y
-# CONFIG_BPCTL is not set
-CONFIG_BPF=y
-# CONFIG_BPF_JIT is not set
-CONFIG_BPF_SYSCALL=y
-# CONFIG_BPQETHER is not set
-CONFIG_BQL=y
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_BRCMFMAC is not set
-# CONFIG_BRCMSMAC is not set
-# CONFIG_BRCMSTB_GISB_ARB is not set
-CONFIG_BRIDGE=y
-# CONFIG_BRIDGE_EBT_802_3 is not set
-# CONFIG_BRIDGE_EBT_AMONG is not set
-# CONFIG_BRIDGE_EBT_ARP is not set
-# CONFIG_BRIDGE_EBT_ARPREPLY is not set
-# CONFIG_BRIDGE_EBT_BROUTE is not set
-# CONFIG_BRIDGE_EBT_DNAT is not set
-# CONFIG_BRIDGE_EBT_IP is not set
-# CONFIG_BRIDGE_EBT_IP6 is not set
-# CONFIG_BRIDGE_EBT_LIMIT is not set
-# CONFIG_BRIDGE_EBT_LOG is not set
-# CONFIG_BRIDGE_EBT_MARK is not set
-# CONFIG_BRIDGE_EBT_MARK_T is not set
-# CONFIG_BRIDGE_EBT_NFLOG is not set
-# CONFIG_BRIDGE_EBT_PKTTYPE is not set
-# CONFIG_BRIDGE_EBT_REDIRECT is not set
-# CONFIG_BRIDGE_EBT_SNAT is not set
-# CONFIG_BRIDGE_EBT_STP is not set
-# CONFIG_BRIDGE_EBT_T_FILTER is not set
-# CONFIG_BRIDGE_EBT_T_NAT is not set
-# CONFIG_BRIDGE_EBT_ULOG is not set
-# CONFIG_BRIDGE_EBT_VLAN is not set
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_BRIDGE_NETFILTER is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_BRIDGE_VLAN_FILTERING is not set
-# CONFIG_BROADCOM_PHY is not set
-CONFIG_BROKEN_ON_SMP=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_BT is not set
-# CONFIG_BTRFS_ASSERT is not set
-# CONFIG_BTRFS_DEBUG is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_BTRFS_FS_POSIX_ACL is not set
-# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
-# CONFIG_BT_ATH3K is not set
-# CONFIG_BT_BNEP is not set
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_CMTP is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIUART_3WIRE is not set
-# CONFIG_BT_HCIUART_ATH3K is not set
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_HIDP is not set
-CONFIG_BT_L2CAP=y
-# CONFIG_BT_MRVL is not set
-# CONFIG_BT_RFCOMM is not set
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_SCO=y
-CONFIG_BUG=y
-CONFIG_BUILDTIME_EXTABLE_SORT=y
-# CONFIG_BUILD_BIN2C is not set
-# CONFIG_C2PORT is not set
-# CONFIG_CADENCE_WATCHDOG is not set
-# CONFIG_CAIF is not set
-# CONFIG_CAN is not set
-# CONFIG_CAN_GS_USB is not set
-# CONFIG_CAN_M_CAN is not set
-# CONFIG_CAN_RCAR is not set
-# CONFIG_CAPI_AVM is not set
-# CONFIG_CAPI_EICON is not set
-# CONFIG_CAPI_TRACE is not set
-CONFIG_CARDBUS=y
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_CARL9170 is not set
-# CONFIG_CARMA_FPGA is not set
-# CONFIG_CARMA_FPGA_PROGRAM is not set
-# CONFIG_CASSINI is not set
-CONFIG_CAVIUM_OCTEON_HELPER=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_SOC is not set
-# CONFIG_CB710_CORE is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_CC_STACKPROTECTOR is not set
-CONFIG_CC_STACKPROTECTOR_NONE=y
-# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
-# CONFIG_CC_STACKPROTECTOR_STRONG is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_CED1401 is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CEPH_LIB is not set
-# CONFIG_CFG80211 is not set
-# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_CFG80211_DEFAULT_PS is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-# CONFIG_CFG80211_WEXT is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_CGROUP_DEBUG is not set
-# CONFIG_CGROUP_NET_PRIO is not set
-# CONFIG_CHARGER_BQ2415X is not set
-# CONFIG_CHARGER_BQ24190 is not set
-# CONFIG_CHARGER_BQ24735 is not set
-# CONFIG_CHARGER_GPIO is not set
-# CONFIG_CHARGER_ISP1704 is not set
-# CONFIG_CHARGER_LP8727 is not set
-# CONFIG_CHARGER_MANAGER is not set
-# CONFIG_CHARGER_MAX8903 is not set
-# CONFIG_CHARGER_SMB347 is not set
-# CONFIG_CHARGER_TWL4030 is not set
-# CONFIG_CHECKPOINT_RESTORE is not set
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_CHELSIO_T4VF is not set
-# CONFIG_CHROME_PLATFORMS is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_CIFS is not set
-# CONFIG_CIFS_ACL is not set
-# CONFIG_CIFS_DEBUG is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_FSCACHE is not set
-# CONFIG_CIFS_NFSD_EXPORT is not set
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_SMB2 is not set
-CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_STATS2 is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CLEANCACHE is not set
-# CONFIG_CLKSRC_VERSATILE is not set
-CONFIG_CLS_U32_MARK=y
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CM32181 is not set
-# CONFIG_CM36651 is not set
-# CONFIG_CMA is not set
-CONFIG_CMDLINE=""
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_CMDLINE_EXTEND is not set
-# CONFIG_CMDLINE_FORCE is not set
-# CONFIG_CMDLINE_FROM_BOOTLOADER is not set
-# CONFIG_CMDLINE_PARTITION is not set
-# CONFIG_CNIC is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_COMEDI is not set
-# CONFIG_COMMON_CLK_DEBUG is not set
-# CONFIG_COMMON_CLK_PXA is not set
-# CONFIG_COMMON_CLK_QCOM is not set
-# CONFIG_COMMON_CLK_SI5351 is not set
-# CONFIG_COMMON_CLK_SI570 is not set
-# CONFIG_COMPACTION is not set
-# CONFIG_COMPAL_LAPTOP is not set
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_COMPILE_TEST is not set
-# CONFIG_CONFIGFS_FS is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_CONSTRUCTORS=y
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_COPS is not set
-# CONFIG_CORDIC is not set
-# CONFIG_COREDUMP is not set
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_CPA_DEBUG is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-# CONFIG_CPU_IDLE_GOV_MENU is not set
-# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
-# CONFIG_CRAMFS is not set
-CONFIG_CRASHLOG=y
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_CRC32_BIT is not set
-CONFIG_CRC32_SARWATE=y
-# CONFIG_CRC32_SELFTEST is not set
-# CONFIG_CRC32_SLICEBY4 is not set
-# CONFIG_CRC32_SLICEBY8 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_CRC8 is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CROSS_COMPILE=""
-# CONFIG_CROSS_MEMORY_ATTACH is not set
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_AEAD is not set
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_AES_586 is not set
-# CONFIG_CRYPTO_AES_ARM is not set
-# CONFIG_CRYPTO_AES_ARM_BS is not set
-# CONFIG_CRYPTO_AES_NI_INTEL is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CMAC is not set
-# CONFIG_CRYPTO_CRC32 is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CRC32C_INTEL is not set
-# CONFIG_CRYPTO_CRCT10DIF is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_DEV_ATMEL_AES is not set
-# CONFIG_CRYPTO_DEV_ATMEL_SHA is not set
-# CONFIG_CRYPTO_DEV_ATMEL_TDES is not set
-# CONFIG_CRYPTO_DEV_CCP is not set
-# CONFIG_CRYPTO_DEV_FSL_CAAM is not set
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_MV_CESA is not set
-# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
-# CONFIG_CRYPTO_DEV_QCE is not set
-# CONFIG_CRYPTO_DEV_SAHARA is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_CRYPTO_DRBG_CTR is not set
-# CONFIG_CRYPTO_DRBG_MENU is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
-# CONFIG_CRYPTO_HASH is not set
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_HW is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_LZ4 is not set
-# CONFIG_CRYPTO_LZ4HC is not set
-# CONFIG_CRYPTO_LZO is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
-# CONFIG_CRYPTO_MCRYPTD is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_PCOMP is not set
-# CONFIG_CRYPTO_PCOMP2 is not set
-CONFIG_CRYPTO_PCRYPT=y
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_RNG is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SALSA20_586 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SEQIV is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA1_ARM is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_TWOFISH_586 is not set
-# CONFIG_CRYPTO_TWOFISH_COMMON is not set
-# CONFIG_CRYPTO_USER is not set
-# CONFIG_CRYPTO_USER_API_HASH is not set
-# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
-# CONFIG_CRYPTO_VMAC is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYSTALHD is not set
-# CONFIG_CS5535_MFGPT is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_CUSE is not set
-# CONFIG_CW1200 is not set
-# CONFIG_CXL_BASE is not set
-# CONFIG_CXT1E1 is not set
-# CONFIG_CYPRESS_FIRMWARE is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_DCB is not set
-# CONFIG_DDR is not set
-# CONFIG_DE600 is not set
-# CONFIG_DE620 is not set
-# CONFIG_DEBUG_ATOMIC_SLEEP is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_INFO_DWARF4 is not set
-CONFIG_DEBUG_INFO_REDUCED=y
-# CONFIG_DEBUG_INFO_SPLIT is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_KOBJECT_RELEASE is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_DEBUG_LL_UART_8250 is not set
-# CONFIG_DEBUG_LL_UART_PL01X is not set
-# CONFIG_DEBUG_LOCKDEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_NX_TEST is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-# CONFIG_DEBUG_PINCTRL is not set
-# CONFIG_DEBUG_PI_LIST is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RODATA is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_DEBUG_SECTION_MISMATCH is not set
-# CONFIG_DEBUG_SEMIHOSTING is not set
-# CONFIG_DEBUG_SET_MODULE_RONX is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
-# CONFIG_DEBUG_UART_BCM63XX is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
-# CONFIG_DEBUG_ZBOOT is not set
-# CONFIG_DECNET is not set
-CONFIG_DEFAULT_CUBIC=y
-CONFIG_DEFAULT_DEADLINE=y
-CONFIG_DEFAULT_HOSTNAME="(none)"
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_DEFAULT_NOOP is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-# CONFIG_DELL_SMO8800 is not set
-# CONFIG_DEPRECATED_PARAM_STRUCT is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_DEVPORT=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-# CONFIG_DEVTMPFS is not set
-# CONFIG_DEVTMPFS_MOUNT is not set
-# CONFIG_DGAP is not set
-# CONFIG_DGNC is not set
-# CONFIG_DGRP is not set
-# CONFIG_DHT11 is not set
-CONFIG_DISABLE_DEV_COREDUMP=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_DISPLAY_CONNECTOR_ANALOG_TV is not set
-# CONFIG_DISPLAY_CONNECTOR_DVI is not set
-# CONFIG_DISPLAY_CONNECTOR_HDMI is not set
-# CONFIG_DISPLAY_ENCODER_TFP410 is not set
-# CONFIG_DISPLAY_ENCODER_TPD12S015 is not set
-# CONFIG_DISPLAY_PANEL_DPI is not set
-# CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02 is not set
-# CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1 is not set
-# CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1 is not set
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_DL2K is not set
-# CONFIG_DLM is not set
-# CONFIG_DM9000 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_DMADEVICES_DEBUG is not set
-# CONFIG_DMASCC is not set
-# CONFIG_DMATEST is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_DMA_ENGINE is not set
-# CONFIG_DMA_SHARED_BUFFER is not set
-# CONFIG_DM_CACHE is not set
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_ERA is not set
-# CONFIG_DM_FLAKEY is not set
-# CONFIG_DM_LOG_USERSPACE is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_RAID is not set
-# CONFIG_DM_SWITCH is not set
-# CONFIG_DM_THIN_PROVISIONING is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_DM_VERITY is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DNET is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_DNS_RESOLVER is not set
-CONFIG_DOUBLEFAULT=y
-CONFIG_DQL=y
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_DRM is not set
-# CONFIG_DS1682 is not set
-# CONFIG_DTLK is not set
-# CONFIG_DUMMY is not set
-CONFIG_DUMMY_CONSOLE_COLUMNS=80
-CONFIG_DUMMY_CONSOLE_ROWS=25
-# CONFIG_DUMMY_IRQ is not set
-# CONFIG_DVB_AU8522_V4L is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_DIB0090 is not set
-# CONFIG_DWC3_HOST_USB3_LPM_ENABLE is not set
-# CONFIG_DW_DMAC is not set
-# CONFIG_DW_WATCHDOG is not set
-# CONFIG_DX_SEP is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_E100 is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_E2100 is not set
-# CONFIG_EARLY_PRINTK_8250 is not set
-# CONFIG_EASYCAP is not set
-# CONFIG_ECHO is not set
-# CONFIG_ECONET is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_EDAC is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_EEPROM_93XX46 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_DIGSY_MTC_CFG is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEXPRESS is not set
-# CONFIG_EEXPRESS_PRO is not set
-CONFIG_EFI_PARTITION=y
-# CONFIG_EFS_FS is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_EMAC_ROCKCHIP is not set
-CONFIG_EMBEDDED=y
-# CONFIG_EM_TIMER_STI is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ENCRYPTED_KEYS is not set
-# CONFIG_ENIC is not set
-# CONFIG_EPAPR_PARAVIRT is not set
-# CONFIG_EPIC100 is not set
-CONFIG_EPOLL=y
-# CONFIG_EQUALIZER is not set
-# CONFIG_ET131X is not set
-# CONFIG_ETH16I is not set
-CONFIG_ETHERNET=y
-# CONFIG_ETHOC is not set
-CONFIG_EVENTFD=y
-# CONFIG_EVENT_POWER_TRACING_DEPRECATED is not set
-# CONFIG_EWRK3 is not set
-CONFIG_EXPERIMENTAL=y
-CONFIG_EXPERT=y
-# CONFIG_EXPORTFS is not set
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_DEBUG is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-CONFIG_EXT4_FS_XATTR=y
-CONFIG_EXT4_USE_FOR_EXT23=y
-# CONFIG_EXTCON is not set
-CONFIG_EXTRA_FIRMWARE=""
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_EXYNOS_ADC is not set
-# CONFIG_EXYNOS_VIDEO is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_F2FS_FS is not set
-# CONFIG_F2FS_FS_POSIX_ACL is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_FANOTIFY is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_FAT_FS is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_FB is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_ARC is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_ARMCLCD is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_AUO_K190X is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_DA8XX is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_GEODE is not set
-# CONFIG_FB_GOLDFISH is not set
-# CONFIG_FB_HGA is not set
-# CONFIG_FB_I740 is not set
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_IMX is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_LE80578 is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_MXS is not set
-# CONFIG_FB_N411 is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_OF is not set
-# CONFIG_FB_OPENCORES is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_PS3 is not set
-# CONFIG_FB_PXA is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIMPLE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_SM7XX is not set
-# CONFIG_FB_SMSCUFX is not set
-# CONFIG_FB_SSD1307 is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_UDL is not set
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_XGI is not set
-# CONFIG_FCOE is not set
-# CONFIG_FCOE_FNIC is not set
-# CONFIG_FDDI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_FENCE_TRACE is not set
-# CONFIG_FHANDLE is not set
-CONFIG_FIB_RULES=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_FIREWIRE is not set
-# CONFIG_FIREWIRE_NOSY is not set
-# CONFIG_FIREWIRE_SERIAL is not set
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_FLATMEM=y
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_FM10K is not set
-# CONFIG_FMC is not set
-# CONFIG_FORCEDETH is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_FRAME_POINTER is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_FREEZER is not set
-# CONFIG_FRONTSWAP is not set
-# CONFIG_FSCACHE is not set
-# CONFIG_FSL_EDMA is not set
-# CONFIG_FSL_XGMAC_MDIO is not set
-CONFIG_FSNOTIFY=y
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_FT1000 is not set
-# CONFIG_FTGMAC100 is not set
-# CONFIG_FTL is not set
-# CONFIG_FTMAC100 is not set
-# CONFIG_FTRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_FUJITSU_TABLET is not set
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_FUSE_FS is not set
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-# CONFIG_FUSION_SPI is not set
-CONFIG_FUTEX=y
-CONFIG_FW_LOADER=y
-CONFIG_FW_LOADER_USER_HELPER=y
-CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
-CONFIG_GACT_PROB=y
-# CONFIG_GADGET_UAC1 is not set
-# CONFIG_GAMEPORT is not set
-# CONFIG_GATEWORKS_GW16083 is not set
-# CONFIG_GCOV is not set
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_GENERIC_ADC_BATTERY is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_CPU_DEVICES is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_NET_UTILS=y
-# CONFIG_GENERIC_PHY is not set
-CONFIG_GENERIC_TIME=y
-# CONFIG_GENEVE is not set
-# CONFIG_GENWQE is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_GIGASET_CAPI is not set
-# CONFIG_GIGASET_DEBUG is not set
-# CONFIG_GLOB_SELFTEST is not set
-# CONFIG_GP2AP020A00F is not set
-# CONFIG_GPIOLIB is not set
-# CONFIG_GPIO_74X164 is not set
-# CONFIG_GPIO_ADNP is not set
-# CONFIG_GPIO_ADP5588 is not set
-# CONFIG_GPIO_AMD8111 is not set
-# CONFIG_GPIO_BCM_KONA is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_DWAPB is not set
-# CONFIG_GPIO_EM is not set
-# CONFIG_GPIO_GENERIC_PLATFORM is not set
-# CONFIG_GPIO_GRGPIO is not set
-# CONFIG_GPIO_ICH is not set
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_LANGWELL is not set
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_MC33880 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_ML_IOH is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_PCH is not set
-# CONFIG_GPIO_PL061 is not set
-# CONFIG_GPIO_RCAR is not set
-# CONFIG_GPIO_RDC321X is not set
-# CONFIG_GPIO_SCH is not set
-# CONFIG_GPIO_SCH311X is not set
-# CONFIG_GPIO_SX150X is not set
-# CONFIG_GPIO_SYSCON is not set
-# CONFIG_GPIO_SYSFS is not set
-# CONFIG_GPIO_TS5500 is not set
-# CONFIG_GPIO_VX855 is not set
-# CONFIG_GPIO_WATCHDOG is not set
-# CONFIG_GPIO_WDT is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_ZEVIO is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_GS_FPGABOOT is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_HAVE_ARM_ARCH_TIMER is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HCALL_STATS is not set
-# CONFIG_HDLC is not set
-# CONFIG_HDLC_CISCO is not set
-# CONFIG_HDLC_FR is not set
-# CONFIG_HDLC_PPP is not set
-# CONFIG_HDLC_RAW is not set
-# CONFIG_HDLC_RAW_ETH is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_HERMES is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_HFSPLUS_FS_POSIX_ACL is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFS_FS_POSIX_ACL is not set
-# CONFIG_HIBERNATION is not set
-# CONFIG_HID is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_ACRUX is not set
-# CONFIG_HID_ACRUX_FF is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_APPLEIR is not set
-# CONFIG_HID_AUREAL is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CP2112 is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_ELECOM is not set
-# CONFIG_HID_ELO is not set
-# CONFIG_HID_EMS_FF is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_GENERIC is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_GT683R is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_HOLTEK is not set
-# CONFIG_HID_HUION is not set
-# CONFIG_HID_ICADE is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_KEYTOUCH is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_LCPOWER is not set
-# CONFIG_HID_LENOVO is not set
-# CONFIG_HID_LENOVO_TPKBD is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_LOGITECH_DJ is not set
-# CONFIG_HID_LOGITECH_HIDPP is not set
-# CONFIG_HID_MAGICMOUSE is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_MULTITOUCH is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PENMOUNT is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_PICOLCD is not set
-# CONFIG_HID_PID is not set
-# CONFIG_HID_PRIMAX is not set
-# CONFIG_HID_PRODIKEYS is not set
-# CONFIG_HID_PS3REMOTE is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_RMI is not set
-# CONFIG_HID_ROCCAT is not set
-# CONFIG_HID_ROCCAT_ARVO is not set
-# CONFIG_HID_ROCCAT_KONE is not set
-# CONFIG_HID_ROCCAT_KONEPLUS is not set
-# CONFIG_HID_ROCCAT_KOVAPLUS is not set
-# CONFIG_HID_ROCCAT_PYRA is not set
-# CONFIG_HID_SAITEK is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SENSOR_HUB is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SPEEDLINK is not set
-# CONFIG_HID_STEELSERIES is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_HID_THINGM is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_TIVO is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_UCLOGIC is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_WALTOP is not set
-# CONFIG_HID_WIIMOTE is not set
-# CONFIG_HID_XINMO is not set
-# CONFIG_HID_ZEROPLUS is not set
-# CONFIG_HID_ZYDACRON is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_HIGH_RES_TIMERS=y
-# CONFIG_HIPPI is not set
-# CONFIG_HIX5HD2_GMAC is not set
-# CONFIG_HMC6352 is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_HOSTAP_CS is not set
-# CONFIG_HOSTAP_PCI is not set
-# CONFIG_HOSTAP_PLX is not set
-CONFIG_HOTPLUG=y
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HP100 is not set
-CONFIG_HPET_MMAP_DEFAULT=y
-# CONFIG_HPFS_FS is not set
-# CONFIG_HPLAN is not set
-# CONFIG_HPLAN_PLUS is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_HP_WIRELESS is not set
-# CONFIG_HSI is not set
-# CONFIG_HSR is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_HVC_DCC is not set
-# CONFIG_HVC_UDBG is not set
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWSPINLOCK_OMAP is not set
-CONFIG_HW_PERF_EVENTS=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HW_RANDOM_AMD is not set
-# CONFIG_HW_RANDOM_ATMEL is not set
-# CONFIG_HW_RANDOM_EXYNOS is not set
-# CONFIG_HW_RANDOM_GEODE is not set
-# CONFIG_HW_RANDOM_INTEL is not set
-# CONFIG_HW_RANDOM_OMAP3_ROM is not set
-# CONFIG_HW_RANDOM_PPC4XX is not set
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_HW_RANDOM_TPM is not set
-# CONFIG_HW_RANDOM_VIA is not set
-# CONFIG_HYPERV is not set
-# CONFIG_HYSDN is not set
-CONFIG_HZ=100
-CONFIG_HZ_100=y
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_200 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_500 is not set
-# CONFIG_HZ_PERIODIC is not set
-# CONFIG_I2C is not set
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCA is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
-# CONFIG_I2C_AU1550 is not set
-# CONFIG_I2C_BCM2835 is not set
-# CONFIG_I2C_CBUS_GPIO is not set
-# CONFIG_I2C_CHARDEV is not set
-# CONFIG_I2C_COMPAT is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_DESIGNWARE_PCI is not set
-# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
-# CONFIG_I2C_DIOLAN_U2C is not set
-# CONFIG_I2C_EG20T is not set
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_HELPER_AUTO is not set
-# CONFIG_I2C_HID is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_IBM_IIC is not set
-# CONFIG_I2C_INTEL_MID is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_ISMT is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_MUX is not set
-# CONFIG_I2C_MUX_PINCTRL is not set
-# CONFIG_I2C_MV64XXX is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_NOMADIK is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_OCTEON is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PXA_PCI is not set
-# CONFIG_I2C_RCAR is not set
-# CONFIG_I2C_RK3X is not set
-# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
-# CONFIG_I2C_SCMI is not set
-# CONFIG_I2C_SH_MOBILE is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_SMBUS is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VERSATILE is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_XILINX is not set
-# CONFIG_I2O is not set
-# CONFIG_I40E is not set
-# CONFIG_I40EVF is not set
-# CONFIG_I6300ESB_WDT is not set
-# CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_IBM_ASM is not set
-# CONFIG_IBM_EMAC_DEBUG is not set
-# CONFIG_IBM_EMAC_EMAC4 is not set
-# CONFIG_IBM_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_IBM_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_EMAC_RGMII is not set
-# CONFIG_IBM_EMAC_TAH is not set
-# CONFIG_IBM_EMAC_ZMII is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_IDE is not set
-# CONFIG_IDEAPAD_LAPTOP is not set
-# CONFIG_IDE_GD is not set
-# CONFIG_IDE_PHISON is not set
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_IEEE802154_FAKEHARD is not set
-# CONFIG_IFB is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_IIO is not set
-# CONFIG_IIO_BUFFER_CB is not set
-CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
-# CONFIG_IIO_GPIO_TRIGGER is not set
-# CONFIG_IIO_INTERRUPT_TRIGGER is not set
-# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set
-# CONFIG_IIO_SIMPLE_DUMMY is not set
-# CONFIG_IIO_ST_ACCEL_3AXIS is not set
-# CONFIG_IIO_ST_GYRO_3AXIS is not set
-# CONFIG_IIO_ST_MAGN_3AXIS is not set
-# CONFIG_IIO_ST_PRESS is not set
-# CONFIG_IIO_SYSFS_TRIGGER is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_IKCONFIG_PROC is not set
-# CONFIG_IMAGE_CMDLINE_HACK is not set
-# CONFIG_IMX_IPUV3_CORE is not set
-CONFIG_INET=y
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_TCP_DIAG is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_UDP_DIAG is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_INFTL is not set
-# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
-# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_APANEL is not set
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_ATLAS_BTNS is not set
-# CONFIG_INPUT_BMA150 is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_CMA3000 is not set
-# CONFIG_INPUT_DRV260X_HAPTICS is not set
-# CONFIG_INPUT_DRV2667_HAPTICS is not set
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_GP2A is not set
-# CONFIG_INPUT_GPIO_BEEPER is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_GPIO_TILT_POLLED is not set
-# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
-# CONFIG_INPUT_IMS_PCU is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_KXTJ9 is not set
-# CONFIG_INPUT_MATRIXKMAP is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_MMA8450 is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_MPU3050 is not set
-# CONFIG_INPUT_PCF8574 is not set
-# CONFIG_INPUT_PCSPKR is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_PWM_BEEPER is not set
-# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_WISTRON_BTNS is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INT340X_THERMAL is not set
-# CONFIG_INTEL_IDLE is not set
-# CONFIG_INTEL_MEI is not set
-# CONFIG_INTEL_MEI_ME is not set
-# CONFIG_INTEL_MEI_TXE is not set
-# CONFIG_INTEL_MIC_CARD is not set
-# CONFIG_INTEL_MIC_HOST is not set
-# CONFIG_INTEL_MID_PTI is not set
-# CONFIG_INTEL_OAKTRAIL is not set
-# CONFIG_INTEL_RST is not set
-# CONFIG_INTEL_SMARTCONNECT is not set
-# CONFIG_INTEL_SOC_PMIC is not set
-# CONFIG_INTERVAL_TREE_TEST is not set
-# CONFIG_INV_MPU6050_IIO is not set
-# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IP1000 is not set
-# CONFIG_IP17XX_PHY is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_RPFILTER is not set
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_NAT is not set
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_RAW is not set
-# CONFIG_IP6_NF_TARGET_HL is not set
-# CONFIG_IP6_NF_TARGET_LOG is not set
-# CONFIG_IP6_NF_TARGET_REJECT is not set
-# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
-# CONFIG_IPACK_BUS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_IPV6 is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_ROUTE_INFO is not set
-# CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_SIT_6RD is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_VTI is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2100_DEBUG is not set
-CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2200 is not set
-# CONFIG_IPW2200_DEBUG is not set
-CONFIG_IPW2200_MONITOR=y
-# CONFIG_IPW2200_PROMISCUOUS is not set
-# CONFIG_IPW2200_QOS is not set
-# CONFIG_IPW2200_RADIOTAP is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_IPX is not set
-CONFIG_IP_ADVANCED_ROUTER=y
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_FIB_TRIE_STATS is not set
-# CONFIG_IP_MROUTE is not set
-CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_MULTIPLE_TABLES=y
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
-# CONFIG_IP_NF_FILTER is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_RPFILTER is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_SECURITY is not set
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_MASQUERADE is not set
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
-# CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_SYNPROXY is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_PIMSM_V1 is not set
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_IP_PNP is not set
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_IP_SET is not set
-# CONFIG_IP_VS is not set
-# CONFIG_IRDA is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_IRQ_ALL_CPUS is not set
-# CONFIG_IRQ_DOMAIN_DEBUG is not set
-# CONFIG_IRQ_TIME_ACCOUNTING is not set
-# CONFIG_IR_GPIO_CIR is not set
-# CONFIG_IR_HIX5HD2 is not set
-# CONFIG_IR_IGUANA is not set
-# CONFIG_IR_IMG is not set
-# CONFIG_IR_IMON is not set
-# CONFIG_IR_JVC_DECODER is not set
-# CONFIG_IR_LIRC_CODEC is not set
-# CONFIG_IR_MCEUSB is not set
-# CONFIG_IR_NEC_DECODER is not set
-# CONFIG_IR_RC5_DECODER is not set
-# CONFIG_IR_RC5_SZ_DECODER is not set
-# CONFIG_IR_RC6_DECODER is not set
-# CONFIG_IR_REDRAT3 is not set
-# CONFIG_IR_SONY_DECODER is not set
-# CONFIG_IR_STREAMZAP is not set
-# CONFIG_IR_TTUSBIR is not set
-# CONFIG_ISCSI_BOOT_SYSFS is not set
-# CONFIG_ISCSI_TCP is not set
-CONFIG_ISDN=y
-# CONFIG_ISDN_AUDIO is not set
-# CONFIG_ISDN_CAPI is not set
-# CONFIG_ISDN_CAPI_CAPIDRV is not set
-# CONFIG_ISDN_DIVERSION is not set
-# CONFIG_ISDN_DRV_ACT2000 is not set
-# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
-# CONFIG_ISDN_DRV_GIGASET is not set
-# CONFIG_ISDN_DRV_HISAX is not set
-# CONFIG_ISDN_DRV_ICN is not set
-# CONFIG_ISDN_DRV_LOOP is not set
-# CONFIG_ISDN_DRV_PCBIT is not set
-# CONFIG_ISDN_DRV_SC is not set
-# CONFIG_ISDN_I4L is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_ISL29020 is not set
-# CONFIG_ISL29125 is not set
-# CONFIG_ISO9660_FS is not set
-# CONFIG_ISS4xx is not set
-# CONFIG_ITG3200 is not set
-# CONFIG_IWL3945 is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWMC3200TOP is not set
-# CONFIG_IXGB is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGBEVF is not set
-# CONFIG_JBD is not set
-# CONFIG_JBD2_DEBUG is not set
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_POSIX_ACL is not set
-# CONFIG_JFFS2_FS_SECURITY is not set
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_LZMA=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_ZLIB is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_JME is not set
-CONFIG_JOLIET=y
-# CONFIG_JUMP_LABEL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_UNCOMPRESSED is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_LZ4 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_KERNEL_MODE_NEON=y
-CONFIG_KERNEL_XZ=y
-CONFIG_KERNFS=y
-# CONFIG_KEXEC is not set
-# CONFIG_KEYBOARD_ADP5588 is not set
-# CONFIG_KEYBOARD_ADP5589 is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_CAP1106 is not set
-# CONFIG_KEYBOARD_GPIO_POLLED is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_LM8333 is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_MCS is not set
-# CONFIG_KEYBOARD_MPR121 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OMAP4 is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_QT1070 is not set
-# CONFIG_KEYBOARD_QT2160 is not set
-# CONFIG_KEYBOARD_SAMSUNG is not set
-# CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_TCA6416 is not set
-# CONFIG_KEYBOARD_TCA8418 is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYS is not set
-# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
-# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
-# CONFIG_KPROBES is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_KSM is not set
-# CONFIG_KSZ884X_PCI is not set
-CONFIG_KUSER_HELPERS=y
-# CONFIG_KVM_GUEST is not set
-# CONFIG_KXCJK1013 is not set
-# CONFIG_KXSD9 is not set
-# CONFIG_L2TP is not set
-# CONFIG_L2TP_ETH is not set
-# CONFIG_L2TP_IP is not set
-# CONFIG_L2TP_V3 is not set
-# CONFIG_LANMEDIA is not set
-# CONFIG_LANTIQ is not set
-# CONFIG_LAPB is not set
-# CONFIG_LASAT is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_LATTICE_ECP3_CONFIG is not set
-CONFIG_LBDAF=y
-# CONFIG_LCD_HX8357 is not set
-# CONFIG_LCD_ILI922X is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_LMS501KF03 is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_LEDS_ATMEL_PWM is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_BLINKM is not set
-CONFIG_LEDS_CLASS=y
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_GPIO is not set
-CONFIG_LEDS_GPIO_OF=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_INTEL_SS4200 is not set
-# CONFIG_LEDS_LM3530 is not set
-# CONFIG_LEDS_LM3556 is not set
-# CONFIG_LEDS_LM355x is not set
-# CONFIG_LEDS_LM3642 is not set
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_LP5523 is not set
-# CONFIG_LEDS_LP5562 is not set
-# CONFIG_LEDS_LP8501 is not set
-# CONFIG_LEDS_LT3593 is not set
-# CONFIG_LEDS_NET5501 is not set
-# CONFIG_LEDS_OT200 is not set
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_PCA9633 is not set
-# CONFIG_LEDS_PCA963X is not set
-# CONFIG_LEDS_PCA9685 is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_RENESAS_TPU is not set
-# CONFIG_LEDS_SYSCON is not set
-# CONFIG_LEDS_TCA6507 is not set
-CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_CAMERA is not set
-# CONFIG_LEDS_TRIGGER_CPU is not set
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-CONFIG_LEDS_TRIGGER_NETDEV=y
-# CONFIG_LEDS_TRIGGER_ONESHOT is not set
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_LIB80211_CRYPT_CCMP is not set
-# CONFIG_LIB80211_CRYPT_TKIP is not set
-# CONFIG_LIB80211_CRYPT_WEP is not set
-# CONFIG_LIB80211_DEBUG is not set
-# CONFIG_LIBCRC32C is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_LIBERTAS_USB is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_LIBIPW_DEBUG is not set
-# CONFIG_LINE6_USB is not set
-# CONFIG_LIRC_STAGING is not set
-# CONFIG_LIS3L02DQ is not set
-# CONFIG_LKDTM is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_LOCKD is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_LOCKD_V4=y
-# CONFIG_LOCKUP_DETECTOR is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_LOCK_TORTURE_TEST is not set
-# CONFIG_LOGFS is not set
-# CONFIG_LOGIG940_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIWHEELS_FF is not set
-# CONFIG_LOGO is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
-# CONFIG_LOONGSON_MC146818 is not set
-# CONFIG_LP486E is not set
-# CONFIG_LPC_ICH is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_LTE_GDM724X is not set
-# CONFIG_LTPC is not set
-# CONFIG_LTR501 is not set
-# CONFIG_LUSTRE_FS is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_LZ4HC_COMPRESS is not set
-# CONFIG_LZ4_COMPRESS is not set
-# CONFIG_LZ4_DECOMPRESS is not set
-CONFIG_LZMA_COMPRESS=y
-CONFIG_LZMA_DECOMPRESS=y
-# CONFIG_LZO_COMPRESS is not set
-# CONFIG_LZO_DECOMPRESS is not set
-# CONFIG_M25PXX_PREFER_SMALL_SECTOR_ERASE is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_MAC80211_MESSAGE_TRACING is not set
-# CONFIG_MACB is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_JZ4740 is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_LOONGSON1 is not set
-# CONFIG_MACH_NO_WESTBRIDGE is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_MACVTAP is not set
-# CONFIG_MAC_EMUMOUSEBTN is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MAG3110 is not set
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
-# CONFIG_MAILBOX is not set
-# CONFIG_MANGLE_BOOTARGS is not set
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_MAX1027 is not set
-# CONFIG_MAX1363 is not set
-# CONFIG_MAX517 is not set
-# CONFIG_MAX5821 is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
-# CONFIG_MCB is not set
-# CONFIG_MCP320X is not set
-# CONFIG_MCP3422 is not set
-# CONFIG_MCP4725 is not set
-# CONFIG_MCP4922 is not set
-# CONFIG_MCPM is not set
-# CONFIG_MD is not set
-# CONFIG_MDIO_BCM_UNIMAC is not set
-# CONFIG_MDIO_BITBANG is not set
-# CONFIG_MDIO_BUS_MUX_GPIO is not set
-# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
-# CONFIG_MD_FAULTY is not set
-# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
-# CONFIG_MEDIA_ATTACH is not set
-# CONFIG_MEDIA_CAMERA_SUPPORT is not set
-# CONFIG_MEDIA_CONTROLLER is not set
-# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
-# CONFIG_MEDIA_PARPORT_SUPPORT is not set
-# CONFIG_MEDIA_PCI_SUPPORT is not set
-# CONFIG_MEDIA_RADIO_SUPPORT is not set
-# CONFIG_MEDIA_RC_SUPPORT is not set
-# CONFIG_MEDIA_SDR_SUPPORT is not set
-# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-# CONFIG_MEDIA_SUPPORT is not set
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-# CONFIG_MEDIA_USB_SUPPORT is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_MEMORY is not set
-# CONFIG_MEMORY_FAILURE is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_MEN_A21_WDT is not set
-CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
-# CONFIG_MFD_88PM800 is not set
-# CONFIG_MFD_88PM805 is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_AAT2870_CORE is not set
-# CONFIG_MFD_ARIZONA_I2C is not set
-# CONFIG_MFD_ARIZONA_SPI is not set
-# CONFIG_MFD_AS3711 is not set
-# CONFIG_MFD_AS3722 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_MFD_AXP20X is not set
-# CONFIG_MFD_BCM590XX is not set
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_CROS_EC is not set
-# CONFIG_MFD_CS5535 is not set
-# CONFIG_MFD_DA9052_I2C is not set
-# CONFIG_MFD_DA9052_SPI is not set
-# CONFIG_MFD_DA9055 is not set
-# CONFIG_MFD_DA9063 is not set
-# CONFIG_MFD_HI6421_PMIC is not set
-# CONFIG_MFD_JANZ_CMODIO is not set
-# CONFIG_MFD_KEMPLD is not set
-# CONFIG_MFD_LM3533 is not set
-# CONFIG_MFD_LP3943 is not set
-# CONFIG_MFD_LP8788 is not set
-# CONFIG_MFD_MAX14577 is not set
-# CONFIG_MFD_MAX77686 is not set
-# CONFIG_MFD_MAX77693 is not set
-# CONFIG_MFD_MAX8907 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_MAX8997 is not set
-# CONFIG_MFD_MAX8998 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_MFD_MC13XXX is not set
-# CONFIG_MFD_MC13XXX_I2C is not set
-# CONFIG_MFD_MC13XXX_SPI is not set
-# CONFIG_MFD_MENF21BMC is not set
-# CONFIG_MFD_OMAP_USB_HOST is not set
-# CONFIG_MFD_PALMAS is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_PM8921_CORE is not set
-# CONFIG_MFD_RC5T583 is not set
-# CONFIG_MFD_RDC321X is not set
-# CONFIG_MFD_RETU is not set
-# CONFIG_MFD_RK808 is not set
-# CONFIG_MFD_RN5T618 is not set
-# CONFIG_MFD_RTSX_PCI is not set
-# CONFIG_MFD_RTSX_USB is not set
-# CONFIG_MFD_S5M_CORE is not set
-# CONFIG_MFD_SEC_CORE is not set
-# CONFIG_MFD_SI476X_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SMSC is not set
-# CONFIG_MFD_STMPE is not set
-CONFIG_MFD_SUPPORT=y
-# CONFIG_MFD_SYSCON is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC3589X is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_MFD_TI_AM335X_TSCADC is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TPS65090 is not set
-# CONFIG_MFD_TPS65217 is not set
-# CONFIG_MFD_TPS65218 is not set
-# CONFIG_MFD_TPS6586X is not set
-# CONFIG_MFD_TPS65910 is not set
-# CONFIG_MFD_TPS65912 is not set
-# CONFIG_MFD_TPS65912_I2C is not set
-# CONFIG_MFD_TPS65912_SPI is not set
-# CONFIG_MFD_TPS80031 is not set
-# CONFIG_MFD_VIPERBOARD is not set
-# CONFIG_MFD_VX855 is not set
-# CONFIG_MFD_WL1273_CORE is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM831X_I2C is not set
-# CONFIG_MFD_WM831X_SPI is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MG_DISK is not set
-# CONFIG_MICREL_KS8995MA is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_MIGRATION is not set
-CONFIG_MII=y
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_MIPS_ALCHEMY is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MIPS_FPU_EMULATOR is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_O32_FP64_SUPPORT is not set
-# CONFIG_MIPS_PARAVIRT is not set
-# CONFIG_MIPS_SEAD3 is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MISC_DEVICES=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_MISDN is not set
-# CONFIG_MISDN_AVMFRITZ is not set
-# CONFIG_MISDN_HFCPCI is not set
-# CONFIG_MISDN_HFCUSB is not set
-# CONFIG_MISDN_INFINEON is not set
-# CONFIG_MISDN_NETJET is not set
-# CONFIG_MISDN_SPEEDFAX is not set
-# CONFIG_MISDN_W6692 is not set
-# CONFIG_MKISS is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX5_CORE is not set
-# CONFIG_MLX90614 is not set
-# CONFIG_MMA8452 is not set
-# CONFIG_MMC is not set
-# CONFIG_MMC_ARMMMCI is not set
-# CONFIG_MMC_AU1X is not set
-# CONFIG_MMC_BLOCK is not set
-CONFIG_MMC_BLOCK_BOUNCE=y
-CONFIG_MMC_BLOCK_MINORS=8
-# CONFIG_MMC_CB710 is not set
-# CONFIG_MMC_CLKGATE is not set
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_DW is not set
-# CONFIG_MMC_MVSDIO is not set
-# CONFIG_MMC_S3C is not set
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SDHCI_ACPI is not set
-# CONFIG_MMC_SDHCI_BCM_KONA is not set
-# CONFIG_MMC_SDHCI_MSM is not set
-# CONFIG_MMC_SDHCI_OF_ARASAN is not set
-# CONFIG_MMC_SDHCI_OF_ESDHC is not set
-# CONFIG_MMC_SDHCI_OF_HLWD is not set
-# CONFIG_MMC_SDHCI_PXAV2 is not set
-# CONFIG_MMC_SDHCI_PXAV3 is not set
-# CONFIG_MMC_SDRICOH_CS is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MMC_TEST is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-# CONFIG_MMC_USDHI6ROL0 is not set
-# CONFIG_MMC_USHC is not set
-# CONFIG_MMC_VIA_SDMMC is not set
-# CONFIG_MMC_VUB300 is not set
-# CONFIG_MMIOTRACE is not set
-CONFIG_MMU=y
-CONFIG_MODULES=y
-# CONFIG_MODULE_COMPRESS is not set
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODULE_SIG is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_MODULE_STRIPPED=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_MOUSE_SYNAPTICS_USB is not set
-# CONFIG_MPL115 is not set
-# CONFIG_MPL3115 is not set
-# CONFIG_MSDOS_FS is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_MSI_LAPTOP is not set
-CONFIG_MTD=y
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_AR7_PARTS is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_MTD_BLOCK2MTD is not set
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_DOCG3 is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_JEDECPROBE is not set
-# CONFIG_MTD_LATCH_ADDR is not set
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_LPDDR2_NVM is not set
-# CONFIG_MTD_M25P80 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_MYLOADER_PARTS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_NAND_AMS_DELTA is not set
-# CONFIG_MTD_NAND_AR934X is not set
-# CONFIG_MTD_NAND_AR934X_HW_ECC is not set
-# CONFIG_MTD_NAND_ATMEL is not set
-# CONFIG_MTD_NAND_AU1550 is not set
-# CONFIG_MTD_NAND_AUTCPU12 is not set
-# CONFIG_MTD_NAND_BCH is not set
-# CONFIG_MTD_NAND_BCM_UMI is not set
-# CONFIG_MTD_NAND_BF5XX is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_CM_X270 is not set
-# CONFIG_MTD_NAND_CS553X is not set
-# CONFIG_MTD_NAND_DAVINCI is not set
-# CONFIG_MTD_NAND_DENALI is not set
-CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xff108018
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_DOCG4 is not set
-# CONFIG_MTD_NAND_ECC is not set
-# CONFIG_MTD_NAND_ECC_BCH is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_FSL_ELBC is not set
-# CONFIG_MTD_NAND_FSL_IFC is not set
-# CONFIG_MTD_NAND_FSL_UPM is not set
-# CONFIG_MTD_NAND_FSMC is not set
-# CONFIG_MTD_NAND_GPIO is not set
-# CONFIG_MTD_NAND_GPMI_NAND is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_JZ4740 is not set
-# CONFIG_MTD_NAND_MPC5121_NFC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_MXC is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_NDFC is not set
-# CONFIG_MTD_NAND_NOMADIK is not set
-# CONFIG_MTD_NAND_NUC900 is not set
-# CONFIG_MTD_NAND_OMAP2 is not set
-# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
-# CONFIG_MTD_NAND_ORION is not set
-# CONFIG_MTD_NAND_PASEMI is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_NAND_PPCHAMELEONEVB is not set
-# CONFIG_MTD_NAND_PXA3xx is not set
-# CONFIG_MTD_NAND_RB4XX is not set
-# CONFIG_MTD_NAND_RB750 is not set
-# CONFIG_MTD_NAND_RICOH is not set
-# CONFIG_MTD_NAND_RTC_FROM4 is not set
-# CONFIG_MTD_NAND_S3C2410 is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_SH_FLCTL is not set
-# CONFIG_MTD_NAND_SOCRATES is not set
-# CONFIG_MTD_NAND_SPIA is not set
-# CONFIG_MTD_NAND_TMIO is not set
-# CONFIG_MTD_NAND_TXX9NDFMC is not set
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_ONENAND is not set
-# CONFIG_MTD_OOPS is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PCMCIA is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_ROM is not set
-CONFIG_MTD_ROOTFS_ROOT_DEV=y
-CONFIG_MTD_ROOTFS_SPLIT=y
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_SM_COMMON is not set
-# CONFIG_MTD_SPINAND_MT29F is not set
-# CONFIG_MTD_SPI_NOR is not set
-# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-CONFIG_MTD_SPLIT=y
-# CONFIG_MTD_SPLIT_BRNIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_EVA_FW is not set
-# CONFIG_MTD_SPLIT_FIRMWARE is not set
-CONFIG_MTD_SPLIT_FIRMWARE_NAME="firmware"
-# CONFIG_MTD_SPLIT_FIT_FW is not set
-# CONFIG_MTD_SPLIT_JIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_LZMA_FW is not set
-# CONFIG_MTD_SPLIT_MINOR_FW is not set
-# CONFIG_MTD_SPLIT_SEAMA_FW is not set
-CONFIG_MTD_SPLIT_SQUASHFS_ROOT=y
-CONFIG_MTD_SPLIT_SUPPORT=y
-# CONFIG_MTD_SPLIT_TPLINK_FW is not set
-# CONFIG_MTD_SPLIT_TRX_FW is not set
-# CONFIG_MTD_SPLIT_UIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_WRGG_FW is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SWAP is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_UBI is not set
-# CONFIG_MTD_UIMAGE_SPLIT is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_MVMDIO is not set
-# CONFIG_MVSW6171_PHY is not set
-# CONFIG_MVSW61XX_PHY is not set
-# CONFIG_MVSWITCH_PHY is not set
-# CONFIG_MWAVE is not set
-# CONFIG_MWIFIEX is not set
-# CONFIG_MWL8K is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NAU7802 is not set
-# CONFIG_NBPFAXI_DMA is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NE2000 is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_NEC_MARKEINS is not set
-CONFIG_NET=y
-# CONFIG_NETCONSOLE is not set
-CONFIG_NETDEVICES=y
-CONFIG_NETDEV_1000=y
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_NETFILTER_ADVANCED is not set
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NETFILTER_NETLINK_ACCT is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_QUEUE_CT is not set
-# CONFIG_NETFILTER_TPROXY is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_NETFILTER_XT_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_BPF is not set
-# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-# CONFIG_NETFILTER_XT_MATCH_CPU is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ECN is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-# CONFIG_NETFILTER_XT_MATCH_HL is not set
-# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
-# CONFIG_NETFILTER_XT_MATCH_LAYER7 is not set
-# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
-# CONFIG_NETFILTER_XT_MATCH_STATE is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
-# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_CT is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_HL is not set
-# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
-# CONFIG_NETFILTER_XT_TARGET_LED is not set
-# CONFIG_NETFILTER_XT_TARGET_LOG is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_TARGET_TEE is not set
-# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETLINK_DIAG is not set
-# CONFIG_NETLINK_MMAP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NETROM is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NET_9P is not set
-# CONFIG_NET_ACT_CSUM is not set
-# CONFIG_NET_ACT_GACT is not set
-# CONFIG_NET_ACT_IPT is not set
-# CONFIG_NET_ACT_MIRRED is not set
-# CONFIG_NET_ACT_NAT is not set
-# CONFIG_NET_ACT_PEDIT is not set
-# CONFIG_NET_ACT_POLICE is not set
-# CONFIG_NET_ACT_SIMP is not set
-# CONFIG_NET_ACT_SKBEDIT is not set
-CONFIG_NET_CADENCE=y
-# CONFIG_NET_CALXEDA_XGMAC is not set
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_BPF is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_CLS_FW is not set
-CONFIG_NET_CLS_IND=y
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_U32 is not set
-CONFIG_NET_CORE=y
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_NET_DSA_BCM_SF2 is not set
-# CONFIG_NET_DSA_MV88E6060 is not set
-# CONFIG_NET_DSA_MV88E6123_61_65 is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
-# CONFIG_NET_DSA_MV88E6171 is not set
-# CONFIG_NET_DSA_MV88E6XXX is not set
-# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_TAG_DSA is not set
-# CONFIG_NET_DSA_TAG_EDSA is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_EMATCH_CMP is not set
-# CONFIG_NET_EMATCH_META is not set
-# CONFIG_NET_EMATCH_NBYTE is not set
-CONFIG_NET_EMATCH_STACK=32
-# CONFIG_NET_EMATCH_TEXT is not set
-# CONFIG_NET_EMATCH_U32 is not set
-CONFIG_NET_ETHERNET=y
-# CONFIG_NET_FC is not set
-# CONFIG_NET_FOU is not set
-# CONFIG_NET_IPGRE is not set
-CONFIG_NET_IPGRE_BROADCAST=y
-# CONFIG_NET_IPGRE_DEMUX is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPVTI is not set
-# CONFIG_NET_IP_TUNNEL is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_KEY is not set
-# CONFIG_NET_KEY_MIGRATE is not set
-# CONFIG_NET_MPLS_GSO is not set
-# CONFIG_NET_PACKET_ENGINE is not set
-CONFIG_NET_PCI=y
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_POCKET is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_NET_PTP_CLASSIFY is not set
-CONFIG_NET_RX_BUSY_POLL=y
-# CONFIG_NET_SB1000 is not set
-CONFIG_NET_SCHED=y
-# CONFIG_NET_SCH_ATM is not set
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_CHOKE is not set
-# CONFIG_NET_SCH_CODEL is not set
-# CONFIG_NET_SCH_DRR is not set
-# CONFIG_NET_SCH_DSMARK is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_NET_SCH_FQ is not set
-CONFIG_NET_SCH_FQ_CODEL=y
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_HHF is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_INGRESS is not set
-# CONFIG_NET_SCH_MQPRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_PIE is not set
-# CONFIG_NET_SCH_PLUG is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_QFQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFB is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCTPPROBE is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_TEAM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_NET_UDP_TUNNEL is not set
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_NET_VENDOR_8390=y
-CONFIG_NET_VENDOR_ADAPTEC=y
-CONFIG_NET_VENDOR_AGERE=y
-CONFIG_NET_VENDOR_ALTEON=y
-CONFIG_NET_VENDOR_AMD=y
-CONFIG_NET_VENDOR_ARC=y
-CONFIG_NET_VENDOR_ATHEROS=y
-CONFIG_NET_VENDOR_BROADCOM=y
-CONFIG_NET_VENDOR_BROCADE=y
-CONFIG_NET_VENDOR_CHELSIO=y
-CONFIG_NET_VENDOR_CIRRUS=y
-CONFIG_NET_VENDOR_CISCO=y
-CONFIG_NET_VENDOR_DEC=y
-CONFIG_NET_VENDOR_DLINK=y
-CONFIG_NET_VENDOR_EMULEX=y
-CONFIG_NET_VENDOR_EXAR=y
-CONFIG_NET_VENDOR_FARADAY=y
-CONFIG_NET_VENDOR_FREESCALE=y
-CONFIG_NET_VENDOR_FUJITSU=y
-CONFIG_NET_VENDOR_HISILICON=y
-CONFIG_NET_VENDOR_HP=y
-CONFIG_NET_VENDOR_I825XX=y
-CONFIG_NET_VENDOR_IBM=y
-CONFIG_NET_VENDOR_INTEL=y
-CONFIG_NET_VENDOR_MARVELL=y
-CONFIG_NET_VENDOR_MELLANOX=y
-CONFIG_NET_VENDOR_MICREL=y
-CONFIG_NET_VENDOR_MICROCHIP=y
-CONFIG_NET_VENDOR_MYRI=y
-CONFIG_NET_VENDOR_NATSEMI=y
-CONFIG_NET_VENDOR_NVIDIA=y
-CONFIG_NET_VENDOR_OKI=y
-CONFIG_NET_VENDOR_QLOGIC=y
-CONFIG_NET_VENDOR_QUALCOMM=y
-CONFIG_NET_VENDOR_RDC=y
-CONFIG_NET_VENDOR_REALTEK=y
-CONFIG_NET_VENDOR_SAMSUNG=y
-CONFIG_NET_VENDOR_SEEQ=y
-CONFIG_NET_VENDOR_SILAN=y
-CONFIG_NET_VENDOR_SILICOM=y
-CONFIG_NET_VENDOR_SIS=y
-CONFIG_NET_VENDOR_SMSC=y
-CONFIG_NET_VENDOR_STMICRO=y
-CONFIG_NET_VENDOR_SUN=y
-CONFIG_NET_VENDOR_TEHUTI=y
-CONFIG_NET_VENDOR_TI=y
-CONFIG_NET_VENDOR_TOSHIBA=y
-CONFIG_NET_VENDOR_VIA=y
-# CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_NET_VENDOR_XILINX=y
-CONFIG_NET_VENDOR_XIRCOM=y
-# CONFIG_NET_XGENE is not set
-CONFIG_NEW_LEDS=y
-# CONFIG_NFC is not set
-# CONFIG_NFC_DEVICES is not set
-# CONFIG_NFSD is not set
-# CONFIG_NFSD_DEPRECATED is not set
-# CONFIG_NFSD_V2_ACL is not set
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFS_ACL_SUPPORT is not set
-CONFIG_NFS_COMMON=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFS_FSCACHE is not set
-# CONFIG_NFS_SWAP is not set
-# CONFIG_NFS_V2 is not set
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_V4_1 is not set
-# CONFIG_NFTL is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-# CONFIG_NF_CONNTRACK_FTP is not set
-# CONFIG_NF_CONNTRACK_H323 is not set
-# CONFIG_NF_CONNTRACK_IPV4 is not set
-# CONFIG_NF_CONNTRACK_IPV6 is not set
-# CONFIG_NF_CONNTRACK_IRC is not set
-# CONFIG_NF_CONNTRACK_MARK is not set
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-CONFIG_NF_CONNTRACK_PROCFS=y
-# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
-# CONFIG_NF_CONNTRACK_RTSP is not set
-# CONFIG_NF_CONNTRACK_SANE is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
-# CONFIG_NF_CONNTRACK_SNMP is not set
-# CONFIG_NF_CONNTRACK_TFTP is not set
-# CONFIG_NF_CONNTRACK_TIMEOUT is not set
-# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
-# CONFIG_NF_CONNTRACK_ZONES is not set
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
-# CONFIG_NF_CT_PROTO_DCCP is not set
-# CONFIG_NF_CT_PROTO_GRE is not set
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_NF_LOG_ARP is not set
-# CONFIG_NF_LOG_IPV4 is not set
-# CONFIG_NF_NAT is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_FTP is not set
-# CONFIG_NF_NAT_H323 is not set
-# CONFIG_NF_NAT_IPV6 is not set
-# CONFIG_NF_NAT_IRC is not set
-# CONFIG_NF_NAT_MASQUERADE_IPV4 is not set
-# CONFIG_NF_NAT_MASQUERADE_IPV6 is not set
-# CONFIG_NF_NAT_NEEDED is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_PROTO_GRE is not set
-# CONFIG_NF_NAT_RTSP is not set
-# CONFIG_NF_NAT_SIP is not set
-# CONFIG_NF_NAT_SNMP_BASIC is not set
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_REJECT_IPV4 is not set
-# CONFIG_NF_REJECT_IPV6 is not set
-# CONFIG_NF_TABLES is not set
-# CONFIG_NI52 is not set
-# CONFIG_NI65 is not set
-# CONFIG_NILFS2_FS is not set
-# CONFIG_NIU is not set
-# CONFIG_NL80211_TESTMODE is not set
-CONFIG_NLATTR=y
-# CONFIG_NLMON is not set
-# CONFIG_NLM_XLP_BOARD is not set
-# CONFIG_NLM_XLR_BOARD is not set
-# CONFIG_NLS is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_MAC_CELTIC is not set
-# CONFIG_NLS_MAC_CENTEURO is not set
-# CONFIG_NLS_MAC_CROATIAN is not set
-# CONFIG_NLS_MAC_CYRILLIC is not set
-# CONFIG_NLS_MAC_GAELIC is not set
-# CONFIG_NLS_MAC_GREEK is not set
-# CONFIG_NLS_MAC_ICELAND is not set
-# CONFIG_NLS_MAC_INUIT is not set
-# CONFIG_NLS_MAC_ROMAN is not set
-# CONFIG_NLS_MAC_ROMANIAN is not set
-# CONFIG_NLS_MAC_TURKISH is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_NORTEL_HERMES is not set
-# CONFIG_NOTIFIER_ERROR_INJECTION is not set
-# CONFIG_NOZOMI is not set
-# CONFIG_NO_BOOTMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_NO_HZ_FULL is not set
-# CONFIG_NO_HZ_IDLE is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NS83820 is not set
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_NTP_PPS is not set
-# CONFIG_NVRAM is not set
-# CONFIG_NV_TCO is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_N_GSM is not set
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_OBS600 is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_OC_ETM is not set
-# CONFIG_OF_SELFTEST is not set
-# CONFIG_OMAP2_DSS_DEBUG is not set
-# CONFIG_OMAP2_DSS_DEBUGFS is not set
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP_CONTROL_USB is not set
-# CONFIG_OMAP_OCP2SCP is not set
-# CONFIG_OMAP_USB2 is not set
-# CONFIG_OMAP_USB3 is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_OPENVSWITCH is not set
-# CONFIG_OPROFILE is not set
-# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
-# CONFIG_ORION_WATCHDOG is not set
-# CONFIG_OSF_PARTITION is not set
-CONFIG_OVERLAY_FS=y
-# CONFIG_P54_COMMON is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_DIAG is not set
-# CONFIG_PAGE_POISONING is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PANEL is not set
-CONFIG_PANIC_ON_OOPS=y
-CONFIG_PANIC_ON_OOPS_VALUE=1
-CONFIG_PANIC_TIMEOUT=1
-# CONFIG_PANTHERLORD_FF is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PARPORT_1284 is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARASAN_CF is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CS5535 is not set
-# CONFIG_PATA_CS5536 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_ISAPNP is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OCTEON_CF is not set
-# CONFIG_PATA_OF_PLATFORM is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PCMCIA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_WINBOND_VLB is not set
-# CONFIG_PC300TOO is not set
-# CONFIG_PCCARD is not set
-# CONFIG_PCH_GBE is not set
-# CONFIG_PCH_PHUB is not set
-# CONFIG_PCI200SYN is not set
-# CONFIG_PCIEAER_INJECT is not set
-# CONFIG_PCIEASPM is not set
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCIE_ECRC is not set
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_PCI_ATMEL is not set
-# CONFIG_PCI_CNB20LE_QUIRK is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_DISABLE_COMMON_QUIRKS is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_PCI_HOST_GENERIC is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_PASID is not set
-# CONFIG_PCI_PRI is not set
-CONFIG_PCI_QUIRKS=y
-# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
-# CONFIG_PCI_STUB is not set
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCMCIA is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_ATMEL is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_HERMES is not set
-# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_SPECTRUM is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_XIRCOM is not set
-# CONFIG_PCNET32 is not set
-# CONFIG_PCSPKR_PLATFORM is not set
-# CONFIG_PD6729 is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_PERCPU_TEST is not set
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERSISTENT_KEYRINGS is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_PHONE is not set
-# CONFIG_PHONET is not set
-# CONFIG_PHYLIB is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
-# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
-# CONFIG_PHY_QCOM_DWC3 is not set
-# CONFIG_PHY_SAMSUNG_USB2 is not set
-# CONFIG_PID_IN_CONTEXTIDR is not set
-# CONFIG_PID_NS is not set
-CONFIG_PINCONF=y
-# CONFIG_PINCTRL is not set
-# CONFIG_PINCTRL_CAPRI is not set
-# CONFIG_PINCTRL_EXYNOS is not set
-# CONFIG_PINCTRL_EXYNOS5440 is not set
-# CONFIG_PINCTRL_MSM8X74 is not set
-CONFIG_PINCTRL_SINGLE=y
-CONFIG_PINMUX=y
-# CONFIG_PLAT_SPEAR is not set
-# CONFIG_PLIP is not set
-# CONFIG_PLX_HERMES is not set
-# CONFIG_PM is not set
-# CONFIG_PMBUS is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PM_AUTOSLEEP is not set
-# CONFIG_PM_DEVFREQ is not set
-# CONFIG_PM_RUNTIME is not set
-# CONFIG_PM_WAKELOCKS is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_POHMELFS is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_POWERCAP is not set
-# CONFIG_POWERTV is not set
-# CONFIG_POWER_AVS is not set
-# CONFIG_POWER_RESET is not set
-# CONFIG_POWER_RESET_RESTART is not set
-# CONFIG_POWER_RESET_VERSATILE is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PPC4xx_GPIO is not set
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
-# CONFIG_PPP is not set
-# CONFIG_PPPOATM is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_DEFLATE is not set
-CONFIG_PPP_FILTER=y
-# CONFIG_PPP_MPPE is not set
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPS is not set
-# CONFIG_PPS_CLIENT_GPIO is not set
-# CONFIG_PPS_CLIENT_KTIMER is not set
-# CONFIG_PPS_CLIENT_LDISC is not set
-# CONFIG_PPS_CLIENT_PARPORT is not set
-# CONFIG_PPS_DEBUG is not set
-# CONFIG_PPTP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_PRINTK=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_PRISM2_USB is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_PROBE_INITRD_HEADER is not set
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_PROC_STRIPPED=y
-CONFIG_PROC_SYSCTL=y
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILING is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_PROVE_RCU is not set
-# CONFIG_PROVE_RCU_DELAY is not set
-# CONFIG_PSB6970_PHY is not set
-# CONFIG_PSTORE is not set
-# CONFIG_PTP_1588_CLOCK is not set
-# CONFIG_PTP_1588_CLOCK_IXP46X is not set
-# CONFIG_PTP_1588_CLOCK_PCH is not set
-# CONFIG_PWM is not set
-# CONFIG_PWM_PCA9685 is not set
-# CONFIG_QCA7000 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX6FS_FS is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_QUOTACTL is not set
-# CONFIG_QUOTA_DEBUG is not set
-# CONFIG_R3964 is not set
-# CONFIG_R6040 is not set
-# CONFIG_R8169 is not set
-# CONFIG_R8187SE is not set
-# CONFIG_R8188EU is not set
-# CONFIG_R8712U is not set
-# CONFIG_R8723AU is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_RALINK is not set
-# CONFIG_RAMOOPS is not set
-# CONFIG_RANDOM32_SELFTEST is not set
-# CONFIG_RAPIDIO is not set
-# CONFIG_RAR_REGISTER is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_RBTREE_TEST is not set
-# CONFIG_RCU_CPU_STALL_INFO is not set
-CONFIG_RCU_CPU_STALL_TIMEOUT=60
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-CONFIG_RCU_FANOUT_LEAF=16
-# CONFIG_RCU_FAST_NO_HZ is not set
-# CONFIG_RCU_NOCB_CPU is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_TRACE is not set
-# CONFIG_RCU_USER_QS is not set
-# CONFIG_RC_ATI_REMOTE is not set
-# CONFIG_RC_CORE is not set
-# CONFIG_RC_DECODERS is not set
-# CONFIG_RC_LOOPBACK is not set
-# CONFIG_RC_MAP is not set
-# CONFIG_RDS is not set
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_GZIP is not set
-# CONFIG_RD_LZ4 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-# CONFIG_RD_XZ is not set
-# CONFIG_READABLE_ASM is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_REDWOOD is not set
-# CONFIG_REGMAP is not set
-# CONFIG_REGMAP_I2C is not set
-# CONFIG_REGMAP_MMIO is not set
-# CONFIG_REGMAP_SPI is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_ACT8865 is not set
-# CONFIG_REGULATOR_AD5398 is not set
-# CONFIG_REGULATOR_ANATOP is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_DA9210 is not set
-# CONFIG_REGULATOR_DA9211 is not set
-# CONFIG_REGULATOR_FAN53555 is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_GPIO is not set
-# CONFIG_REGULATOR_ISL6271A is not set
-# CONFIG_REGULATOR_ISL9305 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_LP3972 is not set
-# CONFIG_REGULATOR_LP872X is not set
-# CONFIG_REGULATOR_LP8755 is not set
-# CONFIG_REGULATOR_LTC3589 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
-# CONFIG_REGULATOR_MAX8952 is not set
-# CONFIG_REGULATOR_MAX8973 is not set
-# CONFIG_REGULATOR_PFUZE100 is not set
-# CONFIG_REGULATOR_TI_ABB is not set
-# CONFIG_REGULATOR_TPS51632 is not set
-# CONFIG_REGULATOR_TPS62360 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_REGULATOR_TPS6524X is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_FS_POSIX_ACL is not set
-# CONFIG_REISERFS_FS_SECURITY is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_RELAY is not set
-# CONFIG_RESET_CONTROLLER is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_RFKILL is not set
-# CONFIG_RFKILL_INPUT is not set
-# CONFIG_RFKILL_REGULATOR is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_RING_BUFFER_STARTUP_TEST is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_ROSE is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_RTC_DEBUG is not set
-# CONFIG_RTC_DRV_AU1XXX is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1343 is not set
-# CONFIG_RTC_DRV_DS1347 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_DS2404 is not set
-# CONFIG_RTC_DRV_DS3232 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_EM3027 is not set
-# CONFIG_RTC_DRV_EP93XX is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
-# CONFIG_RTC_DRV_HYM8563 is not set
-# CONFIG_RTC_DRV_ISL12022 is not set
-# CONFIG_RTC_DRV_ISL12057 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_M41T93 is not set
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_MCP795 is not set
-# CONFIG_RTC_DRV_MOXART is not set
-# CONFIG_RTC_DRV_MPC5121 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_OMAP is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-# CONFIG_RTC_DRV_PCF2127 is not set
-# CONFIG_RTC_DRV_PCF85063 is not set
-# CONFIG_RTC_DRV_PCF8523 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_RTC_DRV_PS3 is not set
-# CONFIG_RTC_DRV_PT7C4338 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_RTC7301 is not set
-# CONFIG_RTC_DRV_RV3029C2 is not set
-# CONFIG_RTC_DRV_RX4581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_SNVS is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_SUN6I is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_XGENE is not set
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_LIB=y
-CONFIG_RTC_SYSTOHC=y
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_RTL8192E is not set
-# CONFIG_RTL8192U is not set
-# CONFIG_RTL8306_PHY is not set
-# CONFIG_RTL8366RB_PHY is not set
-# CONFIG_RTL8366S_PHY is not set
-# CONFIG_RTL8366_SMI is not set
-# CONFIG_RTL8366_SMI_DEBUG_FS is not set
-# CONFIG_RTL8367B_PHY is not set
-# CONFIG_RTL8367_PHY is not set
-# CONFIG_RTLLIB is not set
-# CONFIG_RTL_CARDS is not set
-# CONFIG_RTS5139 is not set
-# CONFIG_RTS5208 is not set
-# CONFIG_RTS_PSTOR is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_RUNTIME_DEBUG is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_S2IO is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_SAMSUNG_LAPTOP is not set
-# CONFIG_SAMSUNG_USB2PHY is not set
-# CONFIG_SAMSUNG_USB3PHY is not set
-# CONFIG_SATA_ACARD_AHCI is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_AHCI_PLATFORM is not set
-# CONFIG_SATA_DWC is not set
-# CONFIG_SATA_FSL is not set
-# CONFIG_SATA_HIGHBANK is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_SATA_PMP is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_RCAR is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SBC_FITPC2_WATCHDOG is not set
-# CONFIG_SBE_2T3E3 is not set
-# CONFIG_SBYPASS is not set
-# CONFIG_SC92031 is not set
-# CONFIG_SCA3000 is not set
-# CONFIG_SCC is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_SCHED_AUTOGROUP is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHED_MC is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCHED_SMT is not set
-# CONFIG_SCHED_STACK_END_CHECK is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_BNX2X_FCOE is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CHELSIO_FCOE is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_CXGB4_ISCSI is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_ESAS2R is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_ISCI is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_LOGGING is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_LPFC is not set
-CONFIG_SCSI_MOD=y
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_MPT3SAS is not set
-# CONFIG_SCSI_MQ_DEFAULT is not set
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_MVSAS_DEBUG is not set
-# CONFIG_SCSI_MVUMI is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_PMCRAID is not set
-CONFIG_SCSI_PROC_FS=y
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_UFSHCD is not set
-# CONFIG_SCSI_ULTRASTOR is not set
-# CONFIG_SCSI_VIRTIO is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-CONFIG_SECURITY_DMESG_RESTRICT=y
-# CONFIG_SEEQ8005 is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_ACPI_POWER is not set
-# CONFIG_SENSORS_AD7314 is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADC128D818 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADS1015 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_ADS7871 is not set
-# CONFIG_SENSORS_ADT7310 is not set
-# CONFIG_SENSORS_ADT7410 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_APDS990X is not set
-# CONFIG_SENSORS_APPLESMC is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATK0110 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_BH1770 is not set
-# CONFIG_SENSORS_BH1780 is not set
-# CONFIG_SENSORS_CORETEMP is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_DS620 is not set
-# CONFIG_SENSORS_EMC1403 is not set
-# CONFIG_SENSORS_EMC2103 is not set
-# CONFIG_SENSORS_EMC6W201 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_FAM15H_POWER is not set
-# CONFIG_SENSORS_FSCHMD is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_G762 is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_GPIO_FAN is not set
-# CONFIG_SENSORS_GSC is not set
-# CONFIG_SENSORS_HDAPS is not set
-# CONFIG_SENSORS_HIH6130 is not set
-# CONFIG_SENSORS_HMC5843 is not set
-# CONFIG_SENSORS_HMC5843_I2C is not set
-# CONFIG_SENSORS_HMC5843_SPI is not set
-# CONFIG_SENSORS_HTU21 is not set
-# CONFIG_SENSORS_I5500 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_IIO_HWMON is not set
-# CONFIG_SENSORS_INA209 is not set
-# CONFIG_SENSORS_INA2XX is not set
-# CONFIG_SENSORS_ISL29018 is not set
-# CONFIG_SENSORS_ISL29028 is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_JC42 is not set
-# CONFIG_SENSORS_JZ4740 is not set
-# CONFIG_SENSORS_K10TEMP is not set
-# CONFIG_SENSORS_K8TEMP is not set
-# CONFIG_SENSORS_LINEAGE is not set
-# CONFIG_SENSORS_LIS3LV02D is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LM95234 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_LM95245 is not set
-# CONFIG_SENSORS_LTC2945 is not set
-# CONFIG_SENSORS_LTC4151 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4222 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LTC4260 is not set
-# CONFIG_SENSORS_LTC4261 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX16065 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX1668 is not set
-# CONFIG_SENSORS_MAX197 is not set
-# CONFIG_SENSORS_MAX6639 is not set
-# CONFIG_SENSORS_MAX6642 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_MAX6697 is not set
-# CONFIG_SENSORS_MCP3021 is not set
-# CONFIG_SENSORS_NCT6683 is not set
-# CONFIG_SENSORS_NCT6775 is not set
-# CONFIG_SENSORS_NTC_THERMISTOR is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_POWR1220 is not set
-# CONFIG_SENSORS_SCH5627 is not set
-# CONFIG_SENSORS_SCH5636 is not set
-# CONFIG_SENSORS_SCH56XX_COMMON is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SHT21 is not set
-# CONFIG_SENSORS_SHTC1 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMM665 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP102 is not set
-# CONFIG_SENSORS_TMP103 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_SENSORS_TSL2563 is not set
-# CONFIG_SENSORS_VEXPRESS is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VIA_CPUTEMP is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83795 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_ACCENT is not set
-# CONFIG_SERIAL_8250_BOCA is not set
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-CONFIG_SERIAL_8250_DMA=y
-# CONFIG_SERIAL_8250_DW is not set
-# CONFIG_SERIAL_8250_EM is not set
-# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-# CONFIG_SERIAL_8250_FINTEK is not set
-# CONFIG_SERIAL_8250_FOURPORT is not set
-# CONFIG_SERIAL_8250_HUB6 is not set
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_PCI is not set
-# CONFIG_SERIAL_8250_RSA is not set
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_SYSRQ is not set
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-# CONFIG_SERIAL_ARC is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_EARLYCON=y
-# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
-# CONFIG_SERIAL_FSL_LPUART is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-# CONFIG_SERIAL_IFX6X60 is not set
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_MAX3107 is not set
-# CONFIG_SERIAL_MAX310X is not set
-# CONFIG_SERIAL_MFD_HSU is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_PCH_UART is not set
-# CONFIG_SERIAL_RP2 is not set
-# CONFIG_SERIAL_SC16IS7XX is not set
-# CONFIG_SERIAL_SCCNXP is not set
-# CONFIG_SERIAL_SH_SCI is not set
-# CONFIG_SERIAL_ST_ASC is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_UARTLITE is not set
-# CONFIG_SERIAL_XILINX_PS_UART is not set
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_ARC_PS2 is not set
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_PS2MULT is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SFC is not set
-# CONFIG_SFI is not set
-# CONFIG_SGETMASK_SYSCALL is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SGI_PARTITION is not set
-CONFIG_SHMEM=y
-# CONFIG_SH_ETH is not set
-# CONFIG_SH_TIMER_CMT is not set
-# CONFIG_SH_TIMER_MTU2 is not set
-# CONFIG_SH_TIMER_TMU is not set
-# CONFIG_SI7005 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIGMA is not set
-CONFIG_SIGNALFD=y
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SKY2_DEBUG is not set
-CONFIG_SLAB=y
-CONFIG_SLABINFO=y
-# CONFIG_SLHC is not set
-# CONFIG_SLICOSS is not set
-# CONFIG_SLIP is not set
-# CONFIG_SLOB is not set
-# CONFIG_SLUB is not set
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_SMARTJOYPLUS_FF is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMC9194 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_SMP is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_SM_FTL is not set
-# CONFIG_SND is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-# CONFIG_SND_AD1816A is not set
-# CONFIG_SND_AD1848 is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ADLIB is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ALOOP is not set
-# CONFIG_SND_ALS100 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_ASIHPI is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_ATMEL_AC97C is not set
-# CONFIG_SND_ATMEL_SOC is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT2320 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BCD2000 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4231 is not set
-# CONFIG_SND_CS4236 is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_CTXFI is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_DESIGNWARE_I2S is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1688 is not set
-# CONFIG_SND_ES18XX is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FIREWIRE is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_GUSCLASSIC is not set
-# CONFIG_SND_GUSEXTREME is not set
-# CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_HDA_INPUT_JACK is not set
-# CONFIG_SND_HDA_INTEL is not set
-CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
-CONFIG_SND_HDA_PREALLOC_SIZE=64
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_HWDEP is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_INTERWAVE is not set
-# CONFIG_SND_INTERWAVE_STB is not set
-# CONFIG_SND_ISA is not set
-# CONFIG_SND_KIRKWOOD_SOC is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_LOLA is not set
-# CONFIG_SND_LX6464ES is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_MIPS is not set
-# CONFIG_SND_MIRO is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MPC52xx_SOC_EFIKA is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_MTS64 is not set
-# CONFIG_SND_MXS_SOC is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_OPL3SA2 is not set
-# CONFIG_SND_OPTI92X_AD1848 is not set
-# CONFIG_SND_OPTI92X_CS4231 is not set
-# CONFIG_SND_OPTI93X is not set
-CONFIG_SND_OSSEMUL=y
-# CONFIG_SND_OXYGEN is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_PCM is not set
-# CONFIG_SND_PCMCIA is not set
-# CONFIG_SND_PCM_OSS is not set
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_PDAUDIOCF is not set
-# CONFIG_SND_PORTMAN2X4 is not set
-# CONFIG_SND_POWERPC_SOC is not set
-# CONFIG_SND_PPC is not set
-# CONFIG_SND_RAWMIDI is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_SB16 is not set
-# CONFIG_SND_SB8 is not set
-# CONFIG_SND_SBAWE is not set
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_SIMPLE_CARD is not set
-# CONFIG_SND_SIS7019 is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SND_SOC_ADAU1701 is not set
-# CONFIG_SND_SOC_AK4104 is not set
-# CONFIG_SND_SOC_AK4554 is not set
-# CONFIG_SND_SOC_AK4642 is not set
-# CONFIG_SND_SOC_AK5386 is not set
-# CONFIG_SND_SOC_ALC5623 is not set
-# CONFIG_SND_SOC_AU1XAUDIO is not set
-# CONFIG_SND_SOC_AU1XPSC is not set
-# CONFIG_SND_SOC_CACHE_LZO is not set
-# CONFIG_SND_SOC_CS35L32 is not set
-# CONFIG_SND_SOC_CS4265 is not set
-# CONFIG_SND_SOC_CS4270 is not set
-# CONFIG_SND_SOC_CS4271 is not set
-# CONFIG_SND_SOC_CS42L52 is not set
-# CONFIG_SND_SOC_CS42L56 is not set
-# CONFIG_SND_SOC_CS42L73 is not set
-# CONFIG_SND_SOC_CS42XX8_I2C is not set
-# CONFIG_SND_SOC_ES8328 is not set
-# CONFIG_SND_SOC_EUKREA_TLV320 is not set
-# CONFIG_SND_SOC_FSL_ASOC_CARD is not set
-# CONFIG_SND_SOC_FSL_ASRC is not set
-# CONFIG_SND_SOC_FSL_ESAI is not set
-# CONFIG_SND_SOC_FSL_SAI is not set
-# CONFIG_SND_SOC_FSL_SPDIF is not set
-# CONFIG_SND_SOC_HDMI_CODEC is not set
-# CONFIG_SND_SOC_IMX_ES8328 is not set
-# CONFIG_SND_SOC_IMX_SPDIF is not set
-# CONFIG_SND_SOC_IMX_WM8962 is not set
-# CONFIG_SND_SOC_INTEL_SST is not set
-# CONFIG_SND_SOC_MPC5200_AC97 is not set
-# CONFIG_SND_SOC_MPC5200_I2S is not set
-# CONFIG_SND_SOC_PCM1681 is not set
-# CONFIG_SND_SOC_PCM1792A is not set
-# CONFIG_SND_SOC_PCM512x_I2C is not set
-# CONFIG_SND_SOC_PCM512x_SPI is not set
-# CONFIG_SND_SOC_SGTL5000 is not set
-# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
-# CONFIG_SND_SOC_SPDIF is not set
-# CONFIG_SND_SOC_SSM2602_I2C is not set
-# CONFIG_SND_SOC_SSM2602_SPI is not set
-# CONFIG_SND_SOC_SSM4567 is not set
-# CONFIG_SND_SOC_STA350 is not set
-# CONFIG_SND_SOC_TAS2552 is not set
-# CONFIG_SND_SOC_TAS5086 is not set
-# CONFIG_SND_SOC_TLV320AIC31XX is not set
-# CONFIG_SND_SOC_TLV320AIC3X is not set
-# CONFIG_SND_SOC_TPA6130A2 is not set
-# CONFIG_SND_SOC_WM8510 is not set
-# CONFIG_SND_SOC_WM8523 is not set
-# CONFIG_SND_SOC_WM8580 is not set
-# CONFIG_SND_SOC_WM8711 is not set
-# CONFIG_SND_SOC_WM8728 is not set
-# CONFIG_SND_SOC_WM8731 is not set
-# CONFIG_SND_SOC_WM8737 is not set
-# CONFIG_SND_SOC_WM8741 is not set
-# CONFIG_SND_SOC_WM8750 is not set
-# CONFIG_SND_SOC_WM8753 is not set
-# CONFIG_SND_SOC_WM8770 is not set
-# CONFIG_SND_SOC_WM8776 is not set
-# CONFIG_SND_SOC_WM8804 is not set
-# CONFIG_SND_SOC_WM8903 is not set
-# CONFIG_SND_SOC_WM8962 is not set
-# CONFIG_SND_SOC_WM8978 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_SSCAPE is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_TIMER is not set
-# CONFIG_SND_TRIDENT is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_6FIRE is not set
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_USB_HIFACE is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_US122L is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_WAVEFRONT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_SOC_AM33XX is not set
-# CONFIG_SOC_AM43XX is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_SOC_DRA7XX is not set
-# CONFIG_SOC_HAS_OMAP2_SDRC is not set
-# CONFIG_SOC_OMAP5 is not set
-# CONFIG_SOC_TI is not set
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_SOLO6X10 is not set
-# CONFIG_SONYPI is not set
-# CONFIG_SONY_LAPTOP is not set
-# CONFIG_SOUND is not set
-# CONFIG_SOUND_PRIME is not set
-# CONFIG_SP5100_TCO is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-# CONFIG_SPARSE_IRQ is not set
-# CONFIG_SPARSE_RCU_POINTER is not set
-# CONFIG_SPEAKUP is not set
-# CONFIG_SPI is not set
-# CONFIG_SPINLOCK_TEST is not set
-# CONFIG_SPI_ALTERA is not set
-# CONFIG_SPI_AU1550 is not set
-# CONFIG_SPI_BCM2835 is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_BUTTERFLY is not set
-# CONFIG_SPI_CADENCE is not set
-# CONFIG_SPI_DEBUG is not set
-# CONFIG_SPI_DESIGNWARE is not set
-# CONFIG_SPI_FSL_DSPI is not set
-# CONFIG_SPI_FSL_ESPI is not set
-# CONFIG_SPI_FSL_SPI is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_GPIO_OLD is not set
-# CONFIG_SPI_LM70_LLP is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_SPI_MPC52xx is not set
-# CONFIG_SPI_MPC52xx_PSC is not set
-# CONFIG_SPI_OCTEON is not set
-# CONFIG_SPI_OC_TINY is not set
-# CONFIG_SPI_ORION is not set
-# CONFIG_SPI_PL022 is not set
-# CONFIG_SPI_PPC4xx is not set
-# CONFIG_SPI_PXA2XX is not set
-# CONFIG_SPI_PXA2XX_PCI is not set
-# CONFIG_SPI_RAMIPS is not set
-# CONFIG_SPI_ROCKCHIP is not set
-# CONFIG_SPI_SC18IS602 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TI_QSPI is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_SPI_TOPCLIFF_PCH is not set
-# CONFIG_SPI_XCOMM is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_XWAY is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_SPMI is not set
-CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
-# CONFIG_SQUASHFS_DECOMP_MULTI is not set
-CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
-# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
-# CONFIG_SQUASHFS_EMBEDDED is not set
-# CONFIG_SQUASHFS_FILE_CACHE is not set
-CONFIG_SQUASHFS_FILE_DIRECT=y
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_SQUASHFS_LZO is not set
-# CONFIG_SQUASHFS_XATTR is not set
-CONFIG_SQUASHFS_XZ=y
-# CONFIG_SQUASHFS_ZLIB is not set
-# CONFIG_SRAM is not set
-# CONFIG_SSB is not set
-# CONFIG_SSBI is not set
-# CONFIG_SSB_DEBUG is not set
-# CONFIG_SSB_DRIVER_GPIO is not set
-# CONFIG_SSB_PCMCIAHOST is not set
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB_SDIOHOST is not set
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSFDC is not set
-# CONFIG_STACKTRACE is not set
-CONFIG_STACKTRACE_SUPPORT=y
-# CONFIG_STACK_TRACER is not set
-CONFIG_STAGING=y
-# CONFIG_STAGING_MEDIA is not set
-CONFIG_STANDALONE=y
-CONFIG_STDBINUTILS=y
-# CONFIG_STE10XP is not set
-# CONFIG_STE_MODEM_RPROC is not set
-# CONFIG_STMMAC_ETH is not set
-# CONFIG_STMMAC_PCI is not set
-# CONFIG_STMMAC_PLATFORM is not set
-CONFIG_STP=y
-# CONFIG_STRICT_DEVMEM is not set
-CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_STUB_POULSBO is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_SUNRPC is not set
-# CONFIG_SUNRPC_DEBUG is not set
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_SUSPEND is not set
-CONFIG_SWAP=y
-# CONFIG_SWCONFIG is not set
-# CONFIG_SWCONFIG_B53 is not set
-# CONFIG_SWCONFIG_B53_SPI_DRIVER is not set
-# CONFIG_SWCONFIG_LEDS is not set
-# CONFIG_SXGBE_ETH is not set
-# CONFIG_SYNCLINK_CS is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_SYSCTL=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_SYSFS=y
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_SYSFS_SYSCALL is not set
-# CONFIG_SYSTEMPORT is not set
-# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_T5403 is not set
-# CONFIG_TARGET_CORE is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_TASKS_RCU is not set
-# CONFIG_TC35815 is not set
-# CONFIG_TCG_ATMEL is not set
-# CONFIG_TCG_INFINEON is not set
-# CONFIG_TCG_ST33_I2C is not set
-# CONFIG_TCG_TIS is not set
-# CONFIG_TCG_TIS_I2C_ATMEL is not set
-# CONFIG_TCG_TIS_I2C_INFINEON is not set
-# CONFIG_TCG_TIS_I2C_NUVOTON is not set
-# CONFIG_TCG_TIS_ST33ZP24 is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_TCG_XEN is not set
-# CONFIG_TCIC is not set
-CONFIG_TCP_CONG_ADVANCED=y
-# CONFIG_TCP_CONG_BIC is not set
-CONFIG_TCP_CONG_CUBIC=y
-# CONFIG_TCP_CONG_DCTCP is not set
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_ILLINOIS is not set
-# CONFIG_TCP_CONG_LP is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_VENO is not set
-# CONFIG_TCP_CONG_WESTWOOD is not set
-# CONFIG_TCP_CONG_YEAH is not set
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_TCS3414 is not set
-# CONFIG_TCS3472 is not set
-# CONFIG_TEGRA_HOST1X is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TEST_BPF is not set
-# CONFIG_TEST_FIRMWARE is not set
-# CONFIG_TEST_KSTRTOX is not set
-# CONFIG_TEST_LIST_SORT is not set
-# CONFIG_TEST_LKM is not set
-# CONFIG_TEST_MODULE is not set
-# CONFIG_TEST_POWER is not set
-# CONFIG_TEST_RHASHTABLE is not set
-# CONFIG_TEST_STRING_HELPERS is not set
-# CONFIG_TEST_UDELAY is not set
-# CONFIG_TEST_USER_COPY is not set
-CONFIG_TEXTSEARCH=y
-# CONFIG_TEXTSEARCH_BM is not set
-# CONFIG_TEXTSEARCH_FSM is not set
-# CONFIG_TEXTSEARCH_KMP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_GOV_BANG_BANG is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_THUNDERBOLT is not set
-# CONFIG_TICK_CPU_ACCOUNTING is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_TIFM_CORE is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_TIMB_DMA is not set
-CONFIG_TIMERFD=y
-# CONFIG_TIMER_STATS is not set
-CONFIG_TINY_RCU=y
-# CONFIG_TIPC is not set
-# CONFIG_TI_ADC081C is not set
-# CONFIG_TI_ADC128S052 is not set
-# CONFIG_TI_AM335X_ADC is not set
-# CONFIG_TI_CPSW is not set
-# CONFIG_TI_CPTS is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_TI_DAVINCI_CPDMA is not set
-# CONFIG_TI_DAVINCI_MDIO is not set
-# CONFIG_TI_ST is not set
-# CONFIG_TLAN is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_TMP006 is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-CONFIG_TMPFS_XATTR=y
-# CONFIG_TORTURE_TEST is not set
-# CONFIG_TOSHIBA_HAPS is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
-# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
-# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_BU21013 is not set
-# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
-# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
-# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
-# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_EGALAX is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_ILI210X is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MAX11801 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_MMS114 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_S3C2410 is not set
-# CONFIG_TOUCHSCREEN_ST1232 is not set
-# CONFIG_TOUCHSCREEN_SUR40 is not set
-# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TPS6507X is not set
-# CONFIG_TOUCHSCREEN_TSC2005 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_ZFORCE is not set
-# CONFIG_TPS6105X is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TPS6507X is not set
-# CONFIG_TR is not set
-# CONFIG_TRACEPOINT_BENCHMARK is not set
-# CONFIG_TRACER_SNAPSHOT is not set
-# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_TRACE_SINK is not set
-CONFIG_TRACING_SUPPORT=y
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_TRANSPARENT_HUGEPAGE is not set
-# CONFIG_TRANZPORT is not set
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_TRUSTED_KEYS is not set
-# CONFIG_TSL2583 is not set
-# CONFIG_TSL2x7x is not set
-# CONFIG_TSL4531 is not set
-CONFIG_TTY=y
-# CONFIG_TTY_PRINTK is not set
-# CONFIG_TUN is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_TWL4030_MADC is not set
-# CONFIG_TWL6030_GPADC is not set
-# CONFIG_TWL6040_CORE is not set
-# CONFIG_TYPHOON is not set
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_UDF_FS is not set
-CONFIG_UDF_NLS=y
-CONFIG_UEVENT_HELPER=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_UFS_FS is not set
-# CONFIG_UHID is not set
-CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
-# CONFIG_UIO is not set
-# CONFIG_ULTRA is not set
-# CONFIG_ULTRIX_PARTITION is not set
-CONFIG_UNIX=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_UNIX_DIAG is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_UPROBES is not set
-# CONFIG_UPROBE_EVENT is not set
-# CONFIG_USB is not set
-# CONFIG_USBIP_CORE is not set
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_ADUTUX is not set
-CONFIG_USB_ALI_M5632=y
-# CONFIG_USB_AMD5536UDC is not set
-CONFIG_USB_AN2720=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_ATM is not set
-CONFIG_USB_BELKIN=y
-# CONFIG_USB_BTMTK is not set
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_CHIPIDEA is not set
-# CONFIG_USB_CONFIGFS is not set
-# CONFIG_USB_CXACRU is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_DEBUG is not set
-CONFIG_USB_DEFAULT_PERSIST=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_DUMMY_HCD is not set
-# CONFIG_USB_DWC2 is not set
-# CONFIG_USB_DWC2_DUAL_ROLE is not set
-# CONFIG_USB_DWC2_HOST is not set
-# CONFIG_USB_DWC2_PERIPHERAL is not set
-# CONFIG_USB_DWC3 is not set
-# CONFIG_USB_DWC3_EXYNOS is not set
-# CONFIG_USB_DWC3_KEYSTONE is not set
-# CONFIG_USB_DWC3_PCI is not set
-# CONFIG_USB_DWC3_QCOM is not set
-# CONFIG_USB_DWC_OTG_LPM is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_EG20T is not set
-# CONFIG_USB_EHCI_HCD_AT91 is not set
-# CONFIG_USB_EHCI_HCD_PPC_OF is not set
-# CONFIG_USB_EHCI_MSM is not set
-# CONFIG_USB_EHCI_MV is not set
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_EHSET_TEST_FIXTURE is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_ENESTORAGE is not set
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_ET61X251 is not set
-CONFIG_USB_EZUSB=y
-# CONFIG_USB_EZUSB_FX2 is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_FOTG210_HCD is not set
-# CONFIG_USB_FOTG210_UDC is not set
-# CONFIG_USB_FSL_USB2 is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_FUNCTIONFS is not set
-# CONFIG_USB_FUSB300 is not set
-# CONFIG_USB_FUSBH200_HCD is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
-CONFIG_USB_GADGET_VBUS_DRAW=2
-# CONFIG_USB_GADGET_XILINX is not set
-# CONFIG_USB_GL860 is not set
-# CONFIG_USB_GOKU is not set
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_GR_UDC is not set
-# CONFIG_USB_GSPCA is not set
-# CONFIG_USB_GSPCA_BENQ is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_CPIA1 is not set
-# CONFIG_USB_GSPCA_DTCS033 is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_JEILINJ is not set
-# CONFIG_USB_GSPCA_JL2005BCD is not set
-# CONFIG_USB_GSPCA_KINECT is not set
-# CONFIG_USB_GSPCA_KONICA is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_NW80X is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_OV534_9 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7302 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SE401 is not set
-# CONFIG_USB_GSPCA_SN9C2028 is not set
-# CONFIG_USB_GSPCA_SN9C20X is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA1528 is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_SQ930X is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_STK1135 is not set
-# CONFIG_USB_GSPCA_STV0680 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TOPRO is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_VICAM is not set
-# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
-# CONFIG_USB_G_ACM_MS is not set
-# CONFIG_USB_G_DBGP is not set
-# CONFIG_USB_G_HID is not set
-# CONFIG_USB_G_MULTI is not set
-# CONFIG_USB_G_NCM is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_G_WEBCAM is not set
-# CONFIG_USB_HCD_TEST_MODE is not set
-# CONFIG_USB_HID is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_HSIC_USB3503 is not set
-# CONFIG_USB_HSO is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_INPUT_IMS_PCU is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_USB_IP_COMMON is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1301 is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_KC2190 is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_LED_TRIG is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LIBUSUAL is not set
-# CONFIG_USB_LINK_LAYER_TEST is not set
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_M66592 is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_MAX3421_HCD is not set
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_MSM_OTG is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_MV_U3D is not set
-# CONFIG_USB_MV_UDC is not set
-# CONFIG_USB_MXS_PHY is not set
-# CONFIG_USB_NET2272 is not set
-# CONFIG_USB_NET2280 is not set
-# CONFIG_USB_NET_AX88179_178A is not set
-# CONFIG_USB_NET_AX8817X is not set
-# CONFIG_USB_NET_CDCETHER is not set
-# CONFIG_USB_NET_CDC_EEM is not set
-# CONFIG_USB_NET_CDC_MBIM is not set
-# CONFIG_USB_NET_CDC_NCM is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_CX82310_ETH is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_DRIVERS is not set
-# CONFIG_USB_NET_GL620A is not set
-# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_USB_NET_KALMIA is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_QMI_WWAN is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_USB_NET_SMSC75XX is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_SR9700 is not set
-# CONFIG_USB_NET_SR9800 is not set
-# CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_OHCI_HCD_PCI is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-# CONFIG_USB_OHCI_HCD_PPC_SOC is not set
-# CONFIG_USB_OHCI_HCD_SSB is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_OTG_FSM is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_PHY is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_PWC_INPUT_EVDEV is not set
-# CONFIG_USB_PXA27X is not set
-# CONFIG_USB_R8A66597 is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_RCAR_PHY is not set
-# CONFIG_USB_RENESAS_USBHS is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_RTL8152 is not set
-# CONFIG_USB_S2255 is not set
-# CONFIG_USB_S3C_HSOTG is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SERIAL is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_F81232 is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_METRO is not set
-# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_MXUPORT is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_QCAUX is not set
-# CONFIG_USB_SERIAL_QT2 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_QUATECH2 is not set
-# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SIMPLE is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_SSU100 is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_WISHBONE is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_XSENS_MT is not set
-# CONFIG_USB_SERIAL_ZIO is not set
-# CONFIG_USB_SERIAL_ZTE is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_SIERRA_NET is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_SPEEDTOUCH is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_ENE_UB6250 is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_REALTEK is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STV06XX is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_SWITCH_FSA9480 is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_TMC is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_UAS is not set
-# CONFIG_USB_UEAGLEATM is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_USS720 is not set
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-# CONFIG_USB_VL600 is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_WPAN_HCD is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-# CONFIG_USB_XHCI_HCD is not set
-# CONFIG_USB_XUSBATM is not set
-# CONFIG_USB_YUREX is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USELIB is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_USE_OF is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_UWB is not set
-# CONFIG_V4L_MEM2MEM_DRIVERS is not set
-# CONFIG_V4L_TEST_DRIVERS is not set
-# CONFIG_VCNL4000 is not set
-# CONFIG_VETH is not set
-# CONFIG_VEXPRESS_CONFIG is not set
-# CONFIG_VF610_ADC is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VGA_ARB is not set
-# CONFIG_VGA_SWITCHEROO is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_VIDEO_ADV7170 is not set
-# CONFIG_VIDEO_ADV7175 is not set
-# CONFIG_VIDEO_ADV7180 is not set
-# CONFIG_VIDEO_ADV7183 is not set
-# CONFIG_VIDEO_ADV7343 is not set
-# CONFIG_VIDEO_ADV7393 is not set
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_AK881X is not set
-# CONFIG_VIDEO_BT819 is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_BT856 is not set
-# CONFIG_VIDEO_BT866 is not set
-# CONFIG_VIDEO_BWQCAM is not set
-# CONFIG_VIDEO_CAFE_CCIC is not set
-# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CQCAM is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_CX231XX is not set
-# CONFIG_VIDEO_CX2341X is not set
-# CONFIG_VIDEO_CX25840 is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_DM6446_CCDC is not set
-# CONFIG_VIDEO_DT3155 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_GO7007 is not set
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_IR_I2C is not set
-# CONFIG_VIDEO_IVTV is not set
-# CONFIG_VIDEO_KS0127 is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_MEDIA is not set
-# CONFIG_VIDEO_MEM2MEM_TESTDEV is not set
-# CONFIG_VIDEO_ML86V7667 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_MT9V011 is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_NOON010PC30 is not set
-# CONFIG_VIDEO_OMAP2_VOUT is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_VIDEO_OV7640 is not set
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_SAA6588 is not set
-# CONFIG_VIDEO_SAA6752HS is not set
-# CONFIG_VIDEO_SAA7110 is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA7127 is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_SAA7185 is not set
-# CONFIG_VIDEO_SAA7191 is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-# CONFIG_VIDEO_SONY_BTF_MPX is not set
-# CONFIG_VIDEO_SR030PC30 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_THS7303 is not set
-# CONFIG_VIDEO_THS8200 is not set
-# CONFIG_VIDEO_TIMBERDALE is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_TM6000 is not set
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-# CONFIG_VIDEO_TVP7002 is not set
-# CONFIG_VIDEO_TW2804 is not set
-# CONFIG_VIDEO_TW9903 is not set
-# CONFIG_VIDEO_TW9906 is not set
-# CONFIG_VIDEO_UDA1342 is not set
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_USBTV is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_VIDEO_V4L2 is not set
-# CONFIG_VIDEO_V4L2_COMMON is not set
-# CONFIG_VIDEO_V4L2_INT_DEVICE is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-# CONFIG_VIDEO_VPX3220 is not set
-# CONFIG_VIDEO_VS6624 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_ZORAN is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_VIRTIO_BALLOON is not set
-# CONFIG_VIRTIO_MMIO is not set
-# CONFIG_VIRTIO_PCI is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
-# CONFIG_VIRT_DRIVERS is not set
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_VITESSE_PHY is not set
-CONFIG_VLAN_8021Q=y
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_VLAN_8021Q_MVRP is not set
-# CONFIG_VME_BUS is not set
-# CONFIG_VMSPLIT_1G is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_2G_OPT is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_3G_OPT is not set
-# CONFIG_VMWARE_PVSCSI is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_VORTEX is not set
-# CONFIG_VSOCKETS is not set
-# CONFIG_VT is not set
-# CONFIG_VT6655 is not set
-# CONFIG_VT6656 is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_VXGE is not set
-# CONFIG_VXLAN is not set
-# CONFIG_W1 is not set
-# CONFIG_W1_CON is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_W1_MASTER_MATROX is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_W1_SLAVE_DS2406 is not set
-# CONFIG_W1_SLAVE_DS2408 is not set
-# CONFIG_W1_SLAVE_DS2413 is not set
-# CONFIG_W1_SLAVE_DS2423 is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_DS2780 is not set
-# CONFIG_W1_SLAVE_DS2781 is not set
-# CONFIG_W1_SLAVE_DS28E04 is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W35UND is not set
-# CONFIG_W83627HF_WDT is not set
-# CONFIG_W83697HF_WDT is not set
-# CONFIG_W83877F_WDT is not set
-# CONFIG_W83977F_WDT is not set
-# CONFIG_WAN is not set
-# CONFIG_WANXL is not set
-# CONFIG_WAN_ROUTER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_CORE is not set
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-# CONFIG_WD80x3 is not set
-# CONFIG_WDTPCI is not set
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PRIV=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
-CONFIG_WILINK_PLATFORM_DATA=y
-# CONFIG_WIMAX is not set
-# CONFIG_WIMAX_GDM72XX is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_WL1251 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_WL18XX is not set
-# CONFIG_WLAGS49_H2 is not set
-# CONFIG_WLAGS49_H25 is not set
-CONFIG_WLAN=y
-# CONFIG_WLCORE is not set
-CONFIG_WL_TI=y
-CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
-# CONFIG_WR_PPMC is not set
-# CONFIG_X25 is not set
-# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
-# CONFIG_X86_PKG_TEMP_THERMAL is not set
-CONFIG_X86_SYSFB=y
-# CONFIG_XEN is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_IPCOMP is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_WARN is not set
-# CONFIG_XILINX_AXI_EMAC is not set
-# CONFIG_XILINX_EMACLITE is not set
-# CONFIG_XILINX_LL_TEMAC is not set
-# CONFIG_XILINX_WATCHDOG is not set
-# CONFIG_XILLYBUS is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_XMON is not set
-# CONFIG_XVMALLOC is not set
-CONFIG_XZ_DEC=y
-# CONFIG_XZ_DEC_ARM is not set
-# CONFIG_XZ_DEC_ARMTHUMB is not set
-# CONFIG_XZ_DEC_BCJ is not set
-# CONFIG_XZ_DEC_IA64 is not set
-# CONFIG_XZ_DEC_POWERPC is not set
-# CONFIG_XZ_DEC_SPARC is not set
-# CONFIG_XZ_DEC_TEST is not set
-# CONFIG_XZ_DEC_X86 is not set
-# CONFIG_YAM is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_YENTA is not set
-# CONFIG_YENTA_O2 is not set
-# CONFIG_YENTA_RICOH is not set
-# CONFIG_YENTA_TI is not set
-# CONFIG_YENTA_TOSHIBA is not set
-# CONFIG_ZBUD is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_ZD1211RW_DEBUG is not set
-# CONFIG_ZEROPLUS_FF is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_ZLIB_DEFLATE is not set
-# CONFIG_ZLIB_INFLATE is not set
-# CONFIG_ZNET is not set
-CONFIG_ZONE_DMA=y
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_ZPOOL is not set
-# CONFIG_ZRAM is not set
-# CONFIG_ZRAM_LZ4_COMPRESS is not set
-# CONFIG_ZSMALLOC is not set
+++ /dev/null
---- a/drivers/mtd/mtdsplit/mtdsplit_brnimage.c
-+++ b/drivers/mtd/mtdsplit/mtdsplit_brnimage.c
-@@ -27,7 +27,7 @@
- #define BRNIMAGE_MAX_OVERHEAD (BRNIMAGE_ALIGN_BYTES + BRNIMAGE_FOOTER_SIZE)
-
- static int mtdsplit_parse_brnimage(struct mtd_info *master,
-- const struct mtd_partition **pparts,
-+ struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
- {
- struct mtd_partition *parts;
---- a/drivers/mtd/mtdsplit/mtdsplit_eva.c
-+++ b/drivers/mtd/mtdsplit/mtdsplit_eva.c
-@@ -29,7 +29,7 @@ struct eva_image_header {
- };
-
- static int mtdsplit_parse_eva(struct mtd_info *master,
-- const struct mtd_partition **pparts,
-+ struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
- {
- struct mtd_partition *parts;
---- a/drivers/mtd/mtdsplit/mtdsplit_fit.c
-+++ b/drivers/mtd/mtdsplit/mtdsplit_fit.c
-@@ -45,8 +45,7 @@ struct fdt_header {
- };
-
- static int
--mtdsplit_fit_parse(struct mtd_info *mtd,
-- const struct mtd_partition **pparts,
-+mtdsplit_fit_parse(struct mtd_info *mtd, struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
- {
- struct fdt_header hdr;
---- a/drivers/mtd/mtdsplit/mtdsplit_lzma.c
-+++ b/drivers/mtd/mtdsplit/mtdsplit_lzma.c
-@@ -28,7 +28,7 @@ struct lzma_header {
- };
-
- static int mtdsplit_parse_lzma(struct mtd_info *master,
-- const struct mtd_partition **pparts,
-+ struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
- {
- struct lzma_header hdr;
---- a/drivers/mtd/mtdsplit/mtdsplit_seama.c
-+++ b/drivers/mtd/mtdsplit/mtdsplit_seama.c
-@@ -30,7 +30,7 @@ struct seama_header {
- };
-
- static int mtdsplit_parse_seama(struct mtd_info *master,
-- const struct mtd_partition **pparts,
-+ struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
- {
- struct seama_header hdr;
---- a/drivers/mtd/mtdsplit/mtdsplit_squashfs.c
-+++ b/drivers/mtd/mtdsplit/mtdsplit_squashfs.c
-@@ -23,7 +23,7 @@
-
- static int
- mtdsplit_parse_squashfs(struct mtd_info *master,
-- const struct mtd_partition **pparts,
-+ struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
- {
- struct mtd_partition *part;
---- a/drivers/mtd/mtdsplit/mtdsplit_tplink.c
-+++ b/drivers/mtd/mtdsplit/mtdsplit_tplink.c
-@@ -83,8 +83,8 @@ struct tplink_fw_header {
- };
-
- static int mtdsplit_parse_tplink(struct mtd_info *master,
-- const struct mtd_partition **pparts,
-- struct mtd_part_parser_data *data)
-+ struct mtd_partition **pparts,
-+ struct mtd_part_parser_data *data)
- {
- struct tplink_fw_header hdr;
- size_t hdr_len, retlen, kernel_size;
---- a/drivers/mtd/mtdsplit/mtdsplit_trx.c
-+++ b/drivers/mtd/mtdsplit/mtdsplit_trx.c
-@@ -56,7 +56,7 @@ read_trx_header(struct mtd_info *mtd, si
-
- static int
- mtdsplit_parse_trx(struct mtd_info *master,
-- const struct mtd_partition **pparts,
-+ struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
- {
- struct mtd_partition *parts;
---- a/drivers/mtd/mtdsplit/mtdsplit_uimage.c
-+++ b/drivers/mtd/mtdsplit/mtdsplit_uimage.c
-@@ -81,7 +81,7 @@ read_uimage_header(struct mtd_info *mtd,
- * of a valid uImage header if found
- */
- static int __mtdsplit_parse_uimage(struct mtd_info *master,
-- const struct mtd_partition **pparts,
-+ struct mtd_partition **pparts,
- struct mtd_part_parser_data *data,
- ssize_t (*find_header)(u_char *buf, size_t len))
- {
-@@ -232,7 +232,7 @@ static ssize_t uimage_verify_default(u_c
-
- static int
- mtdsplit_uimage_parse_generic(struct mtd_info *master,
-- const struct mtd_partition **pparts,
-+ struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
- {
- return __mtdsplit_parse_uimage(master, pparts, data,
-@@ -289,7 +289,7 @@ static ssize_t uimage_verify_wndr3700(u_
-
- static int
- mtdsplit_uimage_parse_netgear(struct mtd_info *master,
-- const struct mtd_partition **pparts,
-+ struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
- {
- return __mtdsplit_parse_uimage(master, pparts, data,
-@@ -331,7 +331,7 @@ static ssize_t uimage_find_edimax(u_char
-
- static int
- mtdsplit_uimage_parse_edimax(struct mtd_info *master,
-- const struct mtd_partition **pparts,
-+ struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
- {
- return __mtdsplit_parse_uimage(master, pparts, data,
---- a/drivers/mtd/mtdsplit/mtdsplit_wrgg.c
-+++ b/drivers/mtd/mtdsplit/mtdsplit_wrgg.c
-@@ -40,8 +40,8 @@ struct wrgg03_header {
-
-
- static int mtdsplit_parse_wrgg(struct mtd_info *master,
-- const struct mtd_partition **pparts,
-- struct mtd_part_parser_data *data)
-+ struct mtd_partition **pparts,
-+ struct mtd_part_parser_data *data)
- {
- struct wrgg03_header hdr;
- size_t hdr_len, retlen, kernel_ent_size;
+++ /dev/null
---- a/drivers/net/phy/adm6996.c
-+++ b/drivers/net/phy/adm6996.c
-@@ -289,7 +289,7 @@ static u16
- adm6996_read_mii_reg(struct adm6996_priv *priv, enum admreg reg)
- {
- struct phy_device *phydev = priv->priv;
-- struct mii_bus *bus = phydev->mdio.bus;
-+ struct mii_bus *bus = phydev->bus;
-
- return bus->read(bus, PHYADDR(reg));
- }
-@@ -298,7 +298,7 @@ static void
- adm6996_write_mii_reg(struct adm6996_priv *priv, enum admreg reg, u16 val)
- {
- struct phy_device *phydev = priv->priv;
-- struct mii_bus *bus = phydev->mdio.bus;
-+ struct mii_bus *bus = phydev->bus;
-
- bus->write(bus, PHYADDR(reg), val);
- }
-@@ -1050,13 +1050,13 @@ static int adm6996_config_init(struct ph
- pdev->supported = ADVERTISED_100baseT_Full;
- pdev->advertising = ADVERTISED_100baseT_Full;
-
-- if (pdev->mdio.addr != 0) {
-+ if (pdev->addr != 0) {
- pr_info ("%s: PHY overlaps ADM6996, providing fixed PHY 0x%x.\n"
-- , pdev->attached_dev->name, pdev->mdio.addr);
-+ , pdev->attached_dev->name, pdev->addr);
- return 0;
- }
-
-- priv = devm_kzalloc(&pdev->mdio.dev, sizeof(struct adm6996_priv), GFP_KERNEL);
-+ priv = devm_kzalloc(&pdev->dev, sizeof(struct adm6996_priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
-@@ -1076,7 +1076,7 @@ static int adm6996_config_init(struct ph
- }
-
- /*
-- * Warning: phydev->priv is NULL if phydev->mdio.addr != 0
-+ * Warning: phydev->priv is NULL if phydev->addr != 0
- */
- static int adm6996_read_status(struct phy_device *phydev)
- {
-@@ -1092,7 +1092,7 @@ static int adm6996_read_status(struct ph
- }
-
- /*
-- * Warning: phydev->priv is NULL if phydev->mdio.addr != 0
-+ * Warning: phydev->priv is NULL if phydev->addr != 0
- */
- static int adm6996_config_aneg(struct phy_device *phydev)
- {
-@@ -1101,11 +1101,11 @@ static int adm6996_config_aneg(struct ph
-
- static int adm6996_fixup(struct phy_device *dev)
- {
-- struct mii_bus *bus = dev->mdio.bus;
-+ struct mii_bus *bus = dev->bus;
- u16 reg;
-
- /* Our custom registers are at PHY addresses 0-10. Claim those. */
-- if (dev->mdio.addr > 10)
-+ if (dev->addr > 10)
- return 0;
-
- /* look for the switch on the bus */
-@@ -1152,6 +1152,7 @@ static struct phy_driver adm6996_phy_dri
- .config_aneg = &adm6996_config_aneg,
- .read_status = &adm6996_read_status,
- .soft_reset = adm6996_soft_reset,
-+ .driver = { .owner = THIS_MODULE,},
- };
-
- static int adm6996_gpio_probe(struct platform_device *pdev)
-@@ -1220,7 +1221,7 @@ static int __init adm6996_init(void)
- int err;
-
- phy_register_fixup_for_id(PHY_ANY_ID, adm6996_fixup);
-- err = phy_driver_register(&adm6996_phy_driver, THIS_MODULE);
-+ err = phy_driver_register(&adm6996_phy_driver);
- if (err)
- return err;
-
---- a/drivers/net/phy/ar8216.c
-+++ b/drivers/net/phy/ar8216.c
-@@ -177,7 +177,7 @@ ar8xxx_phy_check_aneg(struct phy_device
- if (ret & BMCR_ANENABLE)
- return 0;
-
-- dev_info(&phydev->mdio.dev, "ANEG disabled, re-enabling ...\n");
-+ dev_info(&phydev->dev, "ANEG disabled, re-enabling ...\n");
- ret |= BMCR_ANENABLE | BMCR_ANRESTART;
- return phy_write(phydev, MII_BMCR, ret);
- }
-@@ -2007,7 +2007,7 @@ ar8xxx_phy_config_init(struct phy_device
-
- priv->phy = phydev;
-
-- if (phydev->mdio.addr != 0) {
-+ if (phydev->addr != 0) {
- if (chip_is_ar8316(priv)) {
- /* switch device has been initialized, reinit */
- priv->dev.ports = (AR8216_NUM_PORTS - 1);
-@@ -2055,7 +2055,7 @@ ar8xxx_check_link_states(struct ar8xxx_p
- /* flush ARL entries for this port if it went down*/
- if (!link_new)
- priv->chip->atu_flush_port(priv, i);
-- dev_info(&priv->phy->mdio.dev, "Port %d is %s\n",
-+ dev_info(&priv->phy->dev, "Port %d is %s\n",
- i, link_new ? "up" : "down");
- }
-
-@@ -2074,10 +2074,10 @@ ar8xxx_phy_read_status(struct phy_device
- if (phydev->state == PHY_CHANGELINK)
- ar8xxx_check_link_states(priv);
-
-- if (phydev->mdio.addr != 0)
-+ if (phydev->addr != 0)
- return genphy_read_status(phydev);
-
-- ar8216_read_port_link(priv, phydev->mdio.addr, &link);
-+ ar8216_read_port_link(priv, phydev->addr, &link);
- phydev->link = !!link.link;
- if (!phydev->link)
- return 0;
-@@ -2107,7 +2107,7 @@ ar8xxx_phy_read_status(struct phy_device
- static int
- ar8xxx_phy_config_aneg(struct phy_device *phydev)
- {
-- if (phydev->mdio.addr == 0)
-+ if (phydev->addr == 0)
- return 0;
-
- return genphy_config_aneg(phydev);
-@@ -2162,15 +2162,15 @@ ar8xxx_phy_probe(struct phy_device *phyd
- int ret;
-
- /* skip PHYs at unused adresses */
-- if (phydev->mdio.addr != 0 && phydev->mdio.addr != 4)
-+ if (phydev->addr != 0 && phydev->addr != 4)
- return -ENODEV;
-
-- if (!ar8xxx_is_possible(phydev->mdio.bus))
-+ if (!ar8xxx_is_possible(phydev->bus))
- return -ENODEV;
-
- mutex_lock(&ar8xxx_dev_list_lock);
- list_for_each_entry(priv, &ar8xxx_dev_list, list)
-- if (priv->mii_bus == phydev->mdio.bus)
-+ if (priv->mii_bus == phydev->bus)
- goto found;
-
- priv = ar8xxx_create();
-@@ -2179,7 +2179,7 @@ ar8xxx_phy_probe(struct phy_device *phyd
- goto unlock;
- }
-
-- priv->mii_bus = phydev->mdio.bus;
-+ priv->mii_bus = phydev->bus;
-
- ret = ar8xxx_probe_switch(priv);
- if (ret)
-@@ -2200,7 +2200,7 @@ ar8xxx_phy_probe(struct phy_device *phyd
- found:
- priv->use_count++;
-
-- if (phydev->mdio.addr == 0) {
-+ if (phydev->addr == 0) {
- if (ar8xxx_has_gige(priv)) {
- phydev->supported = SUPPORTED_1000baseT_Full;
- phydev->advertising = ADVERTISED_1000baseT_Full;
-@@ -2288,21 +2288,33 @@ ar8xxx_phy_soft_reset(struct phy_device
- return 0;
- }
-
--static struct phy_driver ar8xxx_phy_driver[] = {
-- {
-- .phy_id = 0x004d0000,
-- .name = "Atheros AR8216/AR8236/AR8316",
-- .phy_id_mask = 0xffff0000,
-- .features = PHY_BASIC_FEATURES,
-- .probe = ar8xxx_phy_probe,
-- .remove = ar8xxx_phy_remove,
-- .detach = ar8xxx_phy_detach,
-- .config_init = ar8xxx_phy_config_init,
-- .config_aneg = ar8xxx_phy_config_aneg,
-- .read_status = ar8xxx_phy_read_status,
-- .soft_reset = ar8xxx_phy_soft_reset,
-- }
-+static struct phy_driver ar8xxx_phy_driver = {
-+ .phy_id = 0x004d0000,
-+ .name = "Atheros AR8216/AR8236/AR8316",
-+ .phy_id_mask = 0xffff0000,
-+ .features = PHY_BASIC_FEATURES,
-+ .probe = ar8xxx_phy_probe,
-+ .remove = ar8xxx_phy_remove,
-+ .detach = ar8xxx_phy_detach,
-+ .config_init = ar8xxx_phy_config_init,
-+ .config_aneg = ar8xxx_phy_config_aneg,
-+ .read_status = ar8xxx_phy_read_status,
-+ .soft_reset = ar8xxx_phy_soft_reset,
-+ .driver = { .owner = THIS_MODULE },
- };
-
--module_phy_driver(ar8xxx_phy_driver);
-+int __init
-+ar8xxx_init(void)
-+{
-+ return phy_driver_register(&ar8xxx_phy_driver);
-+}
-+
-+void __exit
-+ar8xxx_exit(void)
-+{
-+ phy_driver_unregister(&ar8xxx_phy_driver);
-+}
-+
-+module_init(ar8xxx_init);
-+module_exit(ar8xxx_exit);
- MODULE_LICENSE("GPL");
---- a/drivers/net/phy/ar8327.c
-+++ b/drivers/net/phy/ar8327.c
-@@ -627,11 +627,11 @@ ar8327_hw_init(struct ar8xxx_priv *priv)
- if (!priv->chip_data)
- return -ENOMEM;
-
-- if (priv->phy->mdio.dev.of_node)
-- ret = ar8327_hw_config_of(priv, priv->phy->mdio.dev.of_node);
-+ if (priv->phy->dev.of_node)
-+ ret = ar8327_hw_config_of(priv, priv->phy->dev.of_node);
- else
- ret = ar8327_hw_config_pdata(priv,
-- priv->phy->mdio.dev.platform_data);
-+ priv->phy->dev.platform_data);
-
- if (ret)
- return ret;
---- a/drivers/net/phy/ip17xx.c
-+++ b/drivers/net/phy/ip17xx.c
-@@ -1273,7 +1273,7 @@ static int ip17xx_probe(struct phy_devic
- int err;
-
- /* We only attach to PHY 0, but use all available PHYs */
-- if (pdev->mdio.addr != 0)
-+ if (pdev->addr != 0)
- return -ENODEV;
-
- state = kzalloc(sizeof(*state), GFP_KERNEL);
-@@ -1283,7 +1283,7 @@ static int ip17xx_probe(struct phy_devic
- dev = &state->dev;
-
- pdev->priv = state;
-- state->mii_bus = pdev->mdio.bus;
-+ state->mii_bus = pdev->bus;
-
- err = get_model(state);
- if (err < 0)
-@@ -1295,7 +1295,7 @@ static int ip17xx_probe(struct phy_devic
- dev->name = state->regs->NAME;
- dev->ops = &ip17xx_ops;
-
-- pr_info("IP17xx: Found %s at %s\n", dev->name, dev_name(&pdev->mdio.dev));
-+ pr_info("IP17xx: Found %s at %s\n", dev->name, dev_name(&pdev->dev));
- return 0;
-
- error:
-@@ -1353,25 +1353,58 @@ static int ip17xx_read_status(struct phy
- return 0;
- }
-
--static struct phy_driver ip17xx_driver[] = {
-- {
-- .name = "IC+ IP17xx",
-- .phy_id = 0x02430c00,
-- .phy_id_mask = 0x0ffffc00,
-- .features = PHY_BASIC_FEATURES,
-- .probe = ip17xx_probe,
-- .remove = ip17xx_remove,
-- .config_init = ip17xx_config_init,
-- .config_aneg = ip17xx_config_aneg,
-- .aneg_done = ip17xx_aneg_done,
-- .update_link = ip17xx_update_link,
-- .read_status = ip17xx_read_status,
-- }
-+static struct phy_driver ip17xx_driver = {
-+ .name = "IC+ IP17xx",
-+ .phy_id = 0x02430c00,
-+ .phy_id_mask = 0x0ffffc00,
-+ .features = PHY_BASIC_FEATURES,
-+ .probe = ip17xx_probe,
-+ .remove = ip17xx_remove,
-+ .config_init = ip17xx_config_init,
-+ .config_aneg = ip17xx_config_aneg,
-+ .aneg_done = ip17xx_aneg_done,
-+ .update_link = ip17xx_update_link,
-+ .read_status = ip17xx_read_status,
-+ .driver = { .owner = THIS_MODULE },
- };
-
--module_phy_driver(ip17xx_driver);
-+static struct phy_driver ip175a_driver = {
-+ .name = "IC+ IP175A",
-+ .phy_id = 0x02430c50,
-+ .phy_id_mask = 0x0ffffff0,
-+ .features = PHY_BASIC_FEATURES,
-+ .probe = ip17xx_probe,
-+ .remove = ip17xx_remove,
-+ .config_init = ip17xx_config_init,
-+ .config_aneg = ip17xx_config_aneg,
-+ .aneg_done = ip17xx_aneg_done,
-+ .update_link = ip17xx_update_link,
-+ .read_status = ip17xx_read_status,
-+ .driver = { .owner = THIS_MODULE },
-+};
-+
-+
-+int __init ip17xx_init(void)
-+{
-+ int ret;
-+
-+ ret = phy_driver_register(&ip175a_driver);
-+ if (ret < 0)
-+ return ret;
-+
-+ return phy_driver_register(&ip17xx_driver);
-+}
-+
-+void __exit ip17xx_exit(void)
-+{
-+ phy_driver_unregister(&ip17xx_driver);
-+ phy_driver_unregister(&ip175a_driver);
-+}
-
- MODULE_AUTHOR("Patrick Horn <patrick.horn@gmail.com>");
- MODULE_AUTHOR("Felix Fietkau <nbd@nbd.name>");
- MODULE_AUTHOR("Martin Mares <mj@ucw.cz>");
- MODULE_LICENSE("GPL");
-+
-+module_init(ip17xx_init);
-+module_exit(ip17xx_exit);
---- a/drivers/net/phy/mvswitch.c
-+++ b/drivers/net/phy/mvswitch.c
-@@ -50,17 +50,13 @@ struct mvswitch_priv {
- static inline u16
- r16(struct phy_device *phydev, int addr, int reg)
- {
-- struct mii_bus *bus = phydev->mdio.bus;
--
-- return bus->read(bus, addr, reg);
-+ return phydev->bus->read(phydev->bus, addr, reg);
- }
-
- static inline void
- w16(struct phy_device *phydev, int addr, int reg, u16 val)
- {
-- struct mii_bus *bus = phydev->mdio.bus;
--
-- bus->write(bus, addr, reg, val);
-+ phydev->bus->write(phydev->bus, addr, reg, val);
- }
-
-
-@@ -398,13 +394,12 @@ mvswitch_probe(struct phy_device *pdev)
- static int
- mvswitch_fixup(struct phy_device *dev)
- {
-- struct mii_bus *bus = dev->mdio.bus;
- u16 reg;
-
-- if (dev->mdio.addr != 0x10)
-+ if (dev->addr != 0x10)
- return 0;
-
-- reg = bus->read(bus, MV_PORTREG(IDENT, 0)) & MV_IDENT_MASK;
-+ reg = dev->bus->read(dev->bus, MV_PORTREG(IDENT, 0)) & MV_IDENT_MASK;
- if (reg != MV_IDENT_VALUE)
- return 0;
-
-@@ -425,13 +420,14 @@ static struct phy_driver mvswitch_driver
- .config_aneg = &mvswitch_config_aneg,
- .aneg_done = &mvswitch_aneg_done,
- .read_status = &mvswitch_read_status,
-+ .driver = { .owner = THIS_MODULE,},
- };
-
- static int __init
- mvswitch_init(void)
- {
- phy_register_fixup_for_id(PHY_ANY_ID, mvswitch_fixup);
-- return phy_driver_register(&mvswitch_driver, THIS_MODULE);
-+ return phy_driver_register(&mvswitch_driver);
- }
-
- static void __exit
---- a/drivers/net/phy/psb6970.c
-+++ b/drivers/net/phy/psb6970.c
-@@ -70,16 +70,12 @@ struct psb6970_priv {
-
- static u16 psb6970_mii_read(struct phy_device *phydev, int reg)
- {
-- struct mii_bus *bus = phydev->mdio.bus;
--
-- return bus->read(bus, PHYADDR(reg));
-+ return phydev->bus->read(phydev->bus, PHYADDR(reg));
- }
-
- static void psb6970_mii_write(struct phy_device *phydev, int reg, u16 val)
- {
-- struct mii_bus *bus = phydev->mdio.bus;
--
-- bus->write(bus, PHYADDR(reg), val);
-+ phydev->bus->write(phydev->bus, PHYADDR(reg), val);
- }
-
- static int
-@@ -316,11 +312,11 @@ static int psb6970_config_init(struct ph
-
- priv->phy = pdev;
-
-- if (pdev->mdio.addr == 0)
-+ if (pdev->addr == 0)
- printk(KERN_INFO "%s: psb6970 switch driver attached.\n",
- pdev->attached_dev->name);
-
-- if (pdev->mdio.addr != 0) {
-+ if (pdev->addr != 0) {
- kfree(priv);
- return 0;
- }
-@@ -388,14 +384,14 @@ static void psb6970_remove(struct phy_de
- if (!priv)
- return;
-
-- if (pdev->mdio.addr == 0)
-+ if (pdev->addr == 0)
- unregister_switch(&priv->dev);
- kfree(priv);
- }
-
- static int psb6970_fixup(struct phy_device *dev)
- {
-- struct mii_bus *bus = dev->mdio.bus;
-+ struct mii_bus *bus = dev->bus;
- u16 reg;
-
- /* look for the switch on the bus */
-@@ -419,12 +415,13 @@ static struct phy_driver psb6970_driver
- .config_init = &psb6970_config_init,
- .config_aneg = &psb6970_config_aneg,
- .read_status = &psb6970_read_status,
-+ .driver = {.owner = THIS_MODULE},
- };
-
- int __init psb6970_init(void)
- {
- phy_register_fixup_for_id(PHY_ANY_ID, psb6970_fixup);
-- return phy_driver_register(&psb6970_driver, THIS_MODULE);
-+ return phy_driver_register(&psb6970_driver);
- }
-
- module_init(psb6970_init);
---- a/drivers/net/phy/rtl8306.c
-+++ b/drivers/net/phy/rtl8306.c
-@@ -877,7 +877,7 @@ rtl8306_config_init(struct phy_device *p
- int err;
-
- /* Only init the switch for the primary PHY */
-- if (pdev->mdio.addr != 0)
-+ if (pdev->addr != 0)
- return 0;
-
- val.value.i = 1;
-@@ -887,7 +887,7 @@ rtl8306_config_init(struct phy_device *p
- priv->dev.ops = &rtl8306_ops;
- priv->do_cpu = 0;
- priv->page = -1;
-- priv->bus = pdev->mdio.bus;
-+ priv->bus = pdev->bus;
-
- chipid = rtl_get(dev, RTL_REG_CHIPID);
- chipver = rtl_get(dev, RTL_REG_CHIPVER);
-@@ -933,13 +933,13 @@ rtl8306_fixup(struct phy_device *pdev)
- u16 chipid;
-
- /* Attach to primary LAN port and WAN port */
-- if (pdev->mdio.addr != 0 && pdev->mdio.addr != 4)
-+ if (pdev->addr != 0 && pdev->addr != 4)
- return 0;
-
- memset(&priv, 0, sizeof(priv));
- priv.fixup = true;
- priv.page = -1;
-- priv.bus = pdev->mdio.bus;
-+ priv.bus = pdev->bus;
- chipid = rtl_get(&priv.dev, RTL_REG_CHIPID);
- if (chipid == 0x5988)
- pdev->phy_id = RTL8306_MAGIC;
-@@ -957,14 +957,14 @@ rtl8306_probe(struct phy_device *pdev)
- * share one rtl_priv instance between virtual phy
- * devices on the same bus
- */
-- if (priv->bus == pdev->mdio.bus)
-+ if (priv->bus == pdev->bus)
- goto found;
- }
- priv = kzalloc(sizeof(struct rtl_priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
-- priv->bus = pdev->mdio.bus;
-+ priv->bus = pdev->bus;
-
- found:
- pdev->priv = priv;
-@@ -985,7 +985,7 @@ rtl8306_config_aneg(struct phy_device *p
- struct rtl_priv *priv = pdev->priv;
-
- /* Only for WAN */
-- if (pdev->mdio.addr == 0)
-+ if (pdev->addr == 0)
- return 0;
-
- /* Restart autonegotiation */
-@@ -1001,7 +1001,7 @@ rtl8306_read_status(struct phy_device *p
- struct rtl_priv *priv = pdev->priv;
- struct switch_dev *dev = &priv->dev;
-
-- if (pdev->mdio.addr == 4) {
-+ if (pdev->addr == 4) {
- /* WAN */
- pdev->speed = rtl_get(dev, RTL_PORT_REG(4, SPEED)) ? SPEED_100 : SPEED_10;
- pdev->duplex = rtl_get(dev, RTL_PORT_REG(4, DUPLEX)) ? DUPLEX_FULL : DUPLEX_HALF;
-@@ -1044,6 +1044,7 @@ static struct phy_driver rtl8306_driver
- .config_init = &rtl8306_config_init,
- .config_aneg = &rtl8306_config_aneg,
- .read_status = &rtl8306_read_status,
-+ .driver = { .owner = THIS_MODULE,},
- };
-
-
-@@ -1051,7 +1052,7 @@ static int __init
- rtl_init(void)
- {
- phy_register_fixup_for_id(PHY_ANY_ID, rtl8306_fixup);
-- return phy_driver_register(&rtl8306_driver, THIS_MODULE);
-+ return phy_driver_register(&rtl8306_driver);
- }
-
- static void __exit
+++ /dev/null
---- a/drivers/mtd/myloader.c
-+++ b/drivers/mtd/myloader.c
-@@ -33,7 +33,7 @@ struct part_data {
- };
-
- static int myloader_parse_partitions(struct mtd_info *master,
-- const struct mtd_partition **pparts,
-+ struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
- {
- struct part_data *buf;
+++ /dev/null
---- a/drivers/ssb/pcihost_wrapper.c
-+++ b/drivers/ssb/pcihost_wrapper.c
-@@ -11,15 +11,17 @@
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-+#include <linux/pm.h>
- #include <linux/pci.h>
- #include <linux/export.h>
- #include <linux/slab.h>
- #include <linux/ssb/ssb.h>
-
-
--#ifdef CONFIG_PM
--static int ssb_pcihost_suspend(struct pci_dev *dev, pm_message_t state)
-+#ifdef CONFIG_PM_SLEEP
-+static int ssb_pcihost_suspend(struct device *d)
- {
-+ struct pci_dev *dev = to_pci_dev(d);
- struct ssb_bus *ssb = pci_get_drvdata(dev);
- int err;
-
-@@ -28,17 +30,23 @@ static int ssb_pcihost_suspend(struct pc
- return err;
- pci_save_state(dev);
- pci_disable_device(dev);
-- pci_set_power_state(dev, pci_choose_state(dev, state));
-+
-+ /* if there is a wakeup enabled child device on ssb bus,
-+ enable pci wakeup posibility. */
-+ device_set_wakeup_enable(d, d->power.wakeup_path);
-+
-+ pci_prepare_to_sleep(dev);
-
- return 0;
- }
-
--static int ssb_pcihost_resume(struct pci_dev *dev)
-+static int ssb_pcihost_resume(struct device *d)
- {
-+ struct pci_dev *dev = to_pci_dev(d);
- struct ssb_bus *ssb = pci_get_drvdata(dev);
- int err;
-
-- pci_set_power_state(dev, PCI_D0);
-+ pci_back_from_sleep(dev);
- err = pci_enable_device(dev);
- if (err)
- return err;
-@@ -49,10 +57,12 @@ static int ssb_pcihost_resume(struct pci
-
- return 0;
- }
--#else /* CONFIG_PM */
--# define ssb_pcihost_suspend NULL
--# define ssb_pcihost_resume NULL
--#endif /* CONFIG_PM */
-+
-+static const struct dev_pm_ops ssb_pcihost_pm_ops = {
-+ SET_SYSTEM_SLEEP_PM_OPS(ssb_pcihost_suspend, ssb_pcihost_resume)
-+};
-+
-+#endif /* CONFIG_PM_SLEEP */
-
- static int ssb_pcihost_probe(struct pci_dev *dev,
- const struct pci_device_id *id)
-@@ -115,8 +125,9 @@ int ssb_pcihost_register(struct pci_driv
- {
- driver->probe = ssb_pcihost_probe;
- driver->remove = ssb_pcihost_remove;
-- driver->suspend = ssb_pcihost_suspend;
-- driver->resume = ssb_pcihost_resume;
-+#ifdef CONFIG_PM_SLEEP
-+ driver->driver.pm = &ssb_pcihost_pm_ops;
-+#endif
-
- return pci_register_driver(driver);
- }
---- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -357,6 +357,16 @@ static void ssb_pcicore_init_hostmode(st
- pcicore_write32(pc, SSB_PCICORE_SBTOPCI2,
- SSB_PCICORE_SBTOPCI_MEM | SSB_PCI_DMA);
-
-+ /*
-+ * Accessing PCI config without a proper delay after devices reset (not
-+ * GPIO reset) was causing reboots on WRT300N v1.0 (BCM4704).
-+ * Tested delay 850 us lowered reboot chance to 50-80%, 1000 us fixed it
-+ * completely. Flushing all writes was also tested but with no luck.
-+ * The same problem was reported for WRT350N v1 (BCM4705), so we just
-+ * sleep here unconditionally.
-+ */
-+ usleep_range(1000, 2000);
-+
- /* Enable PCI bridge BAR0 prefetch and burst */
- val = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- ssb_extpci_write_config(pc, 0, 0, 0, PCI_COMMAND, &val, 2);
---- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -90,25 +90,6 @@ found:
- }
- #endif /* CONFIG_SSB_PCMCIAHOST */
-
--#ifdef CONFIG_SSB_SDIOHOST
--struct ssb_bus *ssb_sdio_func_to_bus(struct sdio_func *func)
--{
-- struct ssb_bus *bus;
--
-- ssb_buses_lock();
-- list_for_each_entry(bus, &buses, list) {
-- if (bus->bustype == SSB_BUSTYPE_SDIO &&
-- bus->host_sdio == func)
-- goto found;
-- }
-- bus = NULL;
--found:
-- ssb_buses_unlock();
--
-- return bus;
--}
--#endif /* CONFIG_SSB_SDIOHOST */
--
- int ssb_for_each_bus_call(unsigned long data,
- int (*func)(struct ssb_bus *bus, unsigned long data))
- {
-@@ -1154,6 +1135,8 @@ static u32 ssb_tmslow_reject_bitmask(str
- case SSB_IDLOW_SSBREV_25: /* TODO - find the proper REJECT bit */
- case SSB_IDLOW_SSBREV_27: /* same here */
- return SSB_TMSLOW_REJECT; /* this is a guess */
-+ case SSB_IDLOW_SSBREV:
-+ break;
- default:
- WARN(1, KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
- }
+++ /dev/null
---- a/include/linux/ssb/ssb.h
-+++ b/include/linux/ssb/ssb.h
-@@ -29,10 +29,13 @@ struct ssb_sprom {
- u8 il0mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11b/g */
- u8 et0mac[6] __aligned(sizeof(u16)); /* MAC address for Ethernet */
- u8 et1mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11a */
-+ u8 et2mac[6] __aligned(sizeof(u16)); /* MAC address for extra Ethernet */
- u8 et0phyaddr; /* MII address for enet0 */
- u8 et1phyaddr; /* MII address for enet1 */
-+ u8 et2phyaddr; /* MII address for enet2 */
- u8 et0mdcport; /* MDIO for enet0 */
- u8 et1mdcport; /* MDIO for enet1 */
-+ u8 et2mdcport; /* MDIO for enet2 */
- u16 dev_id; /* Device ID overriding e.g. PCI ID */
- u16 board_rev; /* Board revision number from SPROM. */
- u16 board_num; /* Board number from SPROM. */
-@@ -88,11 +91,14 @@ struct ssb_sprom {
- u32 ofdm5glpo; /* 5.2GHz OFDM power offset */
- u32 ofdm5gpo; /* 5.3GHz OFDM power offset */
- u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */
-+ u32 boardflags;
-+ u32 boardflags2;
-+ u32 boardflags3;
-+ /* TODO: Switch all drivers to new u32 fields and drop below ones */
- u16 boardflags_lo; /* Board flags (bits 0-15) */
- u16 boardflags_hi; /* Board flags (bits 16-31) */
- u16 boardflags2_lo; /* Board flags (bits 32-47) */
- u16 boardflags2_hi; /* Board flags (bits 48-63) */
-- /* TODO store board flags in a single u64 */
-
- struct ssb_sprom_core_pwr_info core_pwr_info[4];
-
+++ /dev/null
---- a/drivers/bcma/bcma_private.h
-+++ b/drivers/bcma/bcma_private.h
-@@ -22,6 +22,7 @@ struct bcma_bus;
- /* main.c */
- bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
- int timeout);
-+void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core);
- int bcma_bus_register(struct bcma_bus *bus);
- void bcma_bus_unregister(struct bcma_bus *bus);
- int __init bcma_bus_early_register(struct bcma_bus *bus,
---- a/drivers/bcma/driver_chipcommon.c
-+++ b/drivers/bcma/driver_chipcommon.c
-@@ -339,7 +339,7 @@ void bcma_chipco_serial_init(struct bcma
- return;
- }
-
-- irq = bcma_core_irq(cc->core);
-+ irq = bcma_core_irq(cc->core, 0);
-
- /* Determine the registers of the UARTs */
- cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
---- a/drivers/bcma/driver_gpio.c
-+++ b/drivers/bcma/driver_gpio.c
-@@ -152,7 +152,7 @@ static int bcma_gpio_irq_domain_init(str
- handle_simple_irq);
- }
-
-- hwirq = bcma_core_irq(cc->core);
-+ hwirq = bcma_core_irq(cc->core, 0);
- err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio",
- cc);
- if (err)
-@@ -183,7 +183,7 @@ static void bcma_gpio_irq_domain_exit(st
- return;
-
- bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO);
-- free_irq(bcma_core_irq(cc->core), cc);
-+ free_irq(bcma_core_irq(cc->core, 0), cc);
- for (gpio = 0; gpio < chip->ngpio; gpio++) {
- int irq = irq_find_mapping(cc->irq_domain, gpio);
-
---- a/drivers/bcma/driver_mips.c
-+++ b/drivers/bcma/driver_mips.c
-@@ -115,7 +115,7 @@ static u32 bcma_core_mips_irqflag(struct
- * If disabled, 5 is returned.
- * If not supported, 6 is returned.
- */
--static unsigned int bcma_core_mips_irq(struct bcma_device *dev)
-+unsigned int bcma_core_mips_irq(struct bcma_device *dev)
- {
- struct bcma_device *mdev = dev->bus->drv_mips.core;
- u32 irqflag;
-@@ -133,13 +133,6 @@ static unsigned int bcma_core_mips_irq(s
- return 5;
- }
-
--unsigned int bcma_core_irq(struct bcma_device *dev)
--{
-- unsigned int mips_irq = bcma_core_mips_irq(dev);
-- return mips_irq <= 4 ? mips_irq + 2 : 0;
--}
--EXPORT_SYMBOL(bcma_core_irq);
--
- static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
- {
- unsigned int oldirq = bcma_core_mips_irq(dev);
-@@ -423,7 +416,7 @@ void bcma_core_mips_init(struct bcma_drv
- break;
- default:
- list_for_each_entry(core, &bus->cores, list) {
-- core->irq = bcma_core_irq(core);
-+ core->irq = bcma_core_irq(core, 0);
- }
- bcma_err(bus,
- "Unknown device (0x%x) found, can not configure IRQs\n",
---- a/drivers/bcma/driver_pci_host.c
-+++ b/drivers/bcma/driver_pci_host.c
-@@ -593,7 +593,7 @@ int bcma_core_pci_plat_dev_init(struct p
- pr_info("PCI: Fixing up device %s\n", pci_name(dev));
-
- /* Fix up interrupt lines */
-- dev->irq = bcma_core_irq(pc_host->pdev->core);
-+ dev->irq = bcma_core_irq(pc_host->pdev->core, 0);
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-
- readrq = pcie_get_readrq(dev);
-@@ -617,6 +617,6 @@ int bcma_core_pci_pcibios_map_irq(const
-
- pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
- pci_ops);
-- return bcma_core_irq(pc_host->pdev->core);
-+ return bcma_core_irq(pc_host->pdev->core, 0);
- }
- EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -11,6 +11,7 @@
- #include <linux/bcma/bcma.h>
- #include <linux/slab.h>
- #include <linux/of_address.h>
-+#include <linux/of_irq.h>
-
- MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
- MODULE_LICENSE("GPL");
-@@ -153,6 +154,46 @@ static struct device_node *bcma_of_find_
- return NULL;
- }
-
-+static int bcma_of_irq_parse(struct platform_device *parent,
-+ struct bcma_device *core,
-+ struct of_phandle_args *out_irq, int num)
-+{
-+ __be32 laddr[1];
-+ int rc;
-+
-+ if (core->dev.of_node) {
-+ rc = of_irq_parse_one(core->dev.of_node, num, out_irq);
-+ if (!rc)
-+ return rc;
-+ }
-+
-+ out_irq->np = parent->dev.of_node;
-+ out_irq->args_count = 1;
-+ out_irq->args[0] = num;
-+
-+ laddr[0] = cpu_to_be32(core->addr);
-+ return of_irq_parse_raw(laddr, out_irq);
-+}
-+
-+static unsigned int bcma_of_get_irq(struct platform_device *parent,
-+ struct bcma_device *core, int num)
-+{
-+ struct of_phandle_args out_irq;
-+ int ret;
-+
-+ if (!parent || !parent->dev.of_node)
-+ return 0;
-+
-+ ret = bcma_of_irq_parse(parent, core, &out_irq, num);
-+ if (ret) {
-+ bcma_debug(core->bus, "bcma_of_get_irq() failed with rc=%d\n",
-+ ret);
-+ return 0;
-+ }
-+
-+ return irq_create_of_mapping(&out_irq);
-+}
-+
- static void bcma_of_fill_device(struct platform_device *parent,
- struct bcma_device *core)
- {
-@@ -161,18 +202,47 @@ static void bcma_of_fill_device(struct p
- node = bcma_of_find_child_device(parent, core);
- if (node)
- core->dev.of_node = node;
-+
-+ core->irq = bcma_of_get_irq(parent, core, 0);
- }
- #else
- static void bcma_of_fill_device(struct platform_device *parent,
- struct bcma_device *core)
- {
- }
-+static inline unsigned int bcma_of_get_irq(struct platform_device *parent,
-+ struct bcma_device *core, int num)
-+{
-+ return 0;
-+}
- #endif /* CONFIG_OF */
-
--static void bcma_register_core(struct bcma_bus *bus, struct bcma_device *core)
-+unsigned int bcma_core_irq(struct bcma_device *core, int num)
- {
-- int err;
-+ struct bcma_bus *bus = core->bus;
-+ unsigned int mips_irq;
-+
-+ switch (bus->hosttype) {
-+ case BCMA_HOSTTYPE_PCI:
-+ return bus->host_pci->irq;
-+ case BCMA_HOSTTYPE_SOC:
-+ if (bus->drv_mips.core && num == 0) {
-+ mips_irq = bcma_core_mips_irq(core);
-+ return mips_irq <= 4 ? mips_irq + 2 : 0;
-+ }
-+ if (bus->host_pdev)
-+ return bcma_of_get_irq(bus->host_pdev, core, num);
-+ return 0;
-+ case BCMA_HOSTTYPE_SDIO:
-+ return 0;
-+ }
-
-+ return 0;
-+}
-+EXPORT_SYMBOL(bcma_core_irq);
-+
-+void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
-+{
- core->dev.release = bcma_release_core_dev;
- core->dev.bus = &bcma_bus_type;
- dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index);
-@@ -196,6 +266,11 @@ static void bcma_register_core(struct bc
- case BCMA_HOSTTYPE_SDIO:
- break;
- }
-+}
-+
-+static void bcma_register_core(struct bcma_bus *bus, struct bcma_device *core)
-+{
-+ int err;
-
- err = device_register(&core->dev);
- if (err) {
---- a/drivers/bcma/scan.c
-+++ b/drivers/bcma/scan.c
-@@ -505,6 +505,7 @@ int bcma_bus_scan(struct bcma_bus *bus)
- bus->nr_cores++;
- other_core = bcma_find_core_reverse(bus, core->id.id);
- core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1;
-+ bcma_prepare_core(bus, core);
-
- bcma_info(bus, "Core %d found: %s (manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
- core->core_index, bcma_device_name(&core->id),
---- a/include/linux/bcma/bcma.h
-+++ b/include/linux/bcma/bcma.h
-@@ -448,4 +448,6 @@ extern u32 bcma_chipco_pll_read(struct b
- #define BCMA_DMA_TRANSLATION_DMA64_CMT 0x80000000 /* Client Mode Translation for 64-bit DMA */
- extern u32 bcma_core_dma_translation(struct bcma_device *core);
-
-+extern unsigned int bcma_core_irq(struct bcma_device *core, int num);
-+
- #endif /* LINUX_BCMA_H_ */
---- a/include/linux/bcma/bcma_driver_mips.h
-+++ b/include/linux/bcma/bcma_driver_mips.h
-@@ -43,12 +43,12 @@ struct bcma_drv_mips {
- extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
- extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
-
--extern unsigned int bcma_core_irq(struct bcma_device *core);
-+extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
- #else
- static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
- static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
-
--static inline unsigned int bcma_core_irq(struct bcma_device *core)
-+static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev)
- {
- return 0;
- }
---- a/Documentation/devicetree/bindings/bus/bcma.txt
-+++ b/Documentation/devicetree/bindings/bus/bcma.txt
-@@ -8,6 +8,11 @@ Required properties:
-
- The cores on the AXI bus are automatically detected by bcma with the
- memory ranges they are using and they get registered afterwards.
-+Automatic detection of the IRQ number is not working on
-+BCM47xx/BCM53xx ARM SoCs. To assign IRQ numbers to the cores, provide
-+them manually through device tree. Use an interrupt-map to specify the
-+IRQ used by the devices on the bus. The first address is just an index,
-+because we do not have any special register.
-
- The top-level axi bus may contain children representing attached cores
- (devices). This is needed since some hardware details can't be auto
-@@ -22,6 +27,22 @@ Example:
- ranges = <0x00000000 0x18000000 0x00100000>;
- #address-cells = <1>;
- #size-cells = <1>;
-+ #interrupt-cells = <1>;
-+ interrupt-map-mask = <0x000fffff 0xffff>;
-+ interrupt-map =
-+ /* Ethernet Controller 0 */
-+ <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* Ethernet Controller 1 */
-+ <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-+
-+ /* PCIe Controller 0 */
-+ <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-
- chipcommon {
- reg = <0x00000000 0x1000>;
+++ /dev/null
---- a/drivers/bcma/bcma_private.h
-+++ b/drivers/bcma/bcma_private.h
-@@ -23,22 +23,18 @@ struct bcma_bus;
- bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
- int timeout);
- void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core);
-+void bcma_init_bus(struct bcma_bus *bus);
- int bcma_bus_register(struct bcma_bus *bus);
- void bcma_bus_unregister(struct bcma_bus *bus);
--int __init bcma_bus_early_register(struct bcma_bus *bus,
-- struct bcma_device *core_cc,
-- struct bcma_device *core_mips);
-+int __init bcma_bus_early_register(struct bcma_bus *bus);
- #ifdef CONFIG_PM
- int bcma_bus_suspend(struct bcma_bus *bus);
- int bcma_bus_resume(struct bcma_bus *bus);
- #endif
-
- /* scan.c */
-+void bcma_detect_chip(struct bcma_bus *bus);
- int bcma_bus_scan(struct bcma_bus *bus);
--int __init bcma_bus_scan_early(struct bcma_bus *bus,
-- struct bcma_device_id *match,
-- struct bcma_device *core);
--void bcma_init_bus(struct bcma_bus *bus);
-
- /* sprom.c */
- int bcma_sprom_get(struct bcma_bus *bus);
-@@ -109,6 +105,14 @@ extern int bcma_chipco_watchdog_register
- #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
- bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc);
- void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
-+#else
-+static inline bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc)
-+{
-+ return false;
-+}
-+static inline void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
-+{
-+}
- #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
-
- #ifdef CONFIG_BCMA_DRIVER_GPIO
---- a/drivers/bcma/driver_chipcommon.c
-+++ b/drivers/bcma/driver_chipcommon.c
-@@ -79,7 +79,9 @@ static int bcma_chipco_watchdog_ticks_pe
-
- if (cc->capabilities & BCMA_CC_CAP_PMU) {
- if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706)
-- /* 4706 CC and PMU watchdogs are clocked at 1/4 of ALP clock */
-+ /* 4706 CC and PMU watchdogs are clocked at 1/4 of ALP
-+ * clock
-+ */
- return bcma_chipco_get_alp_clock(cc) / 4000;
- else
- /* based on 32KHz ILP clock */
-@@ -97,7 +99,8 @@ int bcma_chipco_watchdog_register(struct
- wdt.driver_data = cc;
- wdt.timer_set = bcma_chipco_watchdog_timer_set_wdt;
- wdt.timer_set_ms = bcma_chipco_watchdog_timer_set_ms_wdt;
-- wdt.max_timer_ms = bcma_chipco_watchdog_get_max_timer(cc) / cc->ticks_per_ms;
-+ wdt.max_timer_ms =
-+ bcma_chipco_watchdog_get_max_timer(cc) / cc->ticks_per_ms;
-
- pdev = platform_device_register_data(NULL, "bcm47xx-wdt",
- cc->core->bus->num, &wdt,
-@@ -175,7 +178,6 @@ void bcma_core_chipcommon_init(struct bc
- u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks)
- {
- u32 maxt;
-- enum bcma_clkmode clkmode;
-
- maxt = bcma_chipco_watchdog_get_max_timer(cc);
- if (cc->capabilities & BCMA_CC_CAP_PMU) {
-@@ -185,8 +187,13 @@ u32 bcma_chipco_watchdog_timer_set(struc
- ticks = maxt;
- bcma_cc_write32(cc, BCMA_CC_PMU_WATCHDOG, ticks);
- } else {
-- clkmode = ticks ? BCMA_CLKMODE_FAST : BCMA_CLKMODE_DYNAMIC;
-- bcma_core_set_clockmode(cc->core, clkmode);
-+ struct bcma_bus *bus = cc->core->bus;
-+
-+ if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4707 &&
-+ bus->chipinfo.id != BCMA_CHIP_ID_BCM53018)
-+ bcma_core_set_clockmode(cc->core,
-+ ticks ? BCMA_CLKMODE_FAST : BCMA_CLKMODE_DYNAMIC);
-+
- if (ticks > maxt)
- ticks = maxt;
- /* instant NMI */
-@@ -335,7 +342,8 @@ void bcma_chipco_serial_init(struct bcma
- | BCMA_CC_CORECTL_UARTCLKEN);
- }
- } else {
-- bcma_err(cc->core->bus, "serial not supported on this device ccrev: 0x%x\n", ccrev);
-+ bcma_err(cc->core->bus, "serial not supported on this device ccrev: 0x%x\n",
-+ ccrev);
- return;
- }
-
---- a/drivers/bcma/driver_pci.c
-+++ b/drivers/bcma/driver_pci.c
-@@ -145,6 +145,47 @@ static u16 bcma_pcie_mdio_writeread(stru
- }
-
- /**************************************************
-+ * Early init.
-+ **************************************************/
-+
-+static void bcma_core_pci_fixcfg(struct bcma_drv_pci *pc)
-+{
-+ struct bcma_device *core = pc->core;
-+ u16 val16, core_index;
-+ uint regoff;
-+
-+ regoff = BCMA_CORE_PCI_SPROM(BCMA_CORE_PCI_SPROM_PI_OFFSET);
-+ core_index = (u16)core->core_index;
-+
-+ val16 = pcicore_read16(pc, regoff);
-+ if (((val16 & BCMA_CORE_PCI_SPROM_PI_MASK) >> BCMA_CORE_PCI_SPROM_PI_SHIFT)
-+ != core_index) {
-+ val16 = (core_index << BCMA_CORE_PCI_SPROM_PI_SHIFT) |
-+ (val16 & ~BCMA_CORE_PCI_SPROM_PI_MASK);
-+ pcicore_write16(pc, regoff, val16);
-+ }
-+}
-+
-+/*
-+ * Apply some early fixes required before accessing SPROM.
-+ * See also si_pci_fixcfg.
-+ */
-+void bcma_core_pci_early_init(struct bcma_drv_pci *pc)
-+{
-+ if (pc->early_setup_done)
-+ return;
-+
-+ pc->hostmode = bcma_core_pci_is_in_hostmode(pc);
-+ if (pc->hostmode)
-+ goto out;
-+
-+ bcma_core_pci_fixcfg(pc);
-+
-+out:
-+ pc->early_setup_done = true;
-+}
-+
-+/**************************************************
- * Workarounds.
- **************************************************/
-
-@@ -175,24 +216,6 @@ static void bcma_pcicore_serdes_workarou
- tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN);
- }
-
--static void bcma_core_pci_fixcfg(struct bcma_drv_pci *pc)
--{
-- struct bcma_device *core = pc->core;
-- u16 val16, core_index;
-- uint regoff;
--
-- regoff = BCMA_CORE_PCI_SPROM(BCMA_CORE_PCI_SPROM_PI_OFFSET);
-- core_index = (u16)core->core_index;
--
-- val16 = pcicore_read16(pc, regoff);
-- if (((val16 & BCMA_CORE_PCI_SPROM_PI_MASK) >> BCMA_CORE_PCI_SPROM_PI_SHIFT)
-- != core_index) {
-- val16 = (core_index << BCMA_CORE_PCI_SPROM_PI_SHIFT) |
-- (val16 & ~BCMA_CORE_PCI_SPROM_PI_MASK);
-- pcicore_write16(pc, regoff, val16);
-- }
--}
--
- /* Fix MISC config to allow coming out of L2/L3-Ready state w/o PRST */
- /* Needs to happen when coming out of 'standby'/'hibernate' */
- static void bcma_core_pci_config_fixup(struct bcma_drv_pci *pc)
-@@ -216,7 +239,6 @@ static void bcma_core_pci_config_fixup(s
-
- static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc)
- {
-- bcma_core_pci_fixcfg(pc);
- bcma_pcicore_serdes_workaround(pc);
- bcma_core_pci_config_fixup(pc);
- }
-@@ -226,13 +248,11 @@ void bcma_core_pci_init(struct bcma_drv_
- if (pc->setup_done)
- return;
-
--#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
-- pc->hostmode = bcma_core_pci_is_in_hostmode(pc);
-+ bcma_core_pci_early_init(pc);
-+
- if (pc->hostmode)
- bcma_core_pci_hostmode_init(pc);
--#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
--
-- if (!pc->hostmode)
-+ else
- bcma_core_pci_clientmode_init(pc);
- }
-
---- a/drivers/bcma/host_pci.c
-+++ b/drivers/bcma/host_pci.c
-@@ -13,10 +13,12 @@
-
- static void bcma_host_pci_switch_core(struct bcma_device *core)
- {
-+ int win2 = core->bus->host_is_pcie2 ?
-+ BCMA_PCIE2_BAR0_WIN2 : BCMA_PCI_BAR0_WIN2;
-+
- pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN,
- core->addr);
-- pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN2,
-- core->wrap);
-+ pci_write_config_dword(core->bus->host_pci, win2, core->wrap);
- core->bus->mapped_core = core;
- bcma_debug(core->bus, "Switched to core: 0x%X\n", core->id.id);
- }
---- a/drivers/bcma/host_soc.c
-+++ b/drivers/bcma/host_soc.c
-@@ -193,7 +193,7 @@ int __init bcma_host_soc_init(struct bcm
- int err;
-
- /* Scan bus and initialize it */
-- err = bcma_bus_early_register(bus, &soc->core_cc, &soc->core_mips);
-+ err = bcma_bus_early_register(bus);
- if (err)
- iounmap(bus->mmio);
-
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -268,6 +268,18 @@ void bcma_prepare_core(struct bcma_bus *
- }
- }
-
-+void bcma_init_bus(struct bcma_bus *bus)
-+{
-+ mutex_lock(&bcma_buses_mutex);
-+ bus->num = bcma_bus_next_num++;
-+ mutex_unlock(&bcma_buses_mutex);
-+
-+ INIT_LIST_HEAD(&bus->cores);
-+ bus->nr_cores = 0;
-+
-+ bcma_detect_chip(bus);
-+}
-+
- static void bcma_register_core(struct bcma_bus *bus, struct bcma_device *core)
- {
- int err;
-@@ -356,12 +368,19 @@ static void bcma_unregister_cores(struct
- struct bcma_device *core, *tmp;
-
- list_for_each_entry_safe(core, tmp, &bus->cores, list) {
-+ if (!core->dev_registered)
-+ continue;
- list_del(&core->list);
-- if (core->dev_registered)
-- device_unregister(&core->dev);
-+ device_unregister(&core->dev);
- }
- if (bus->hosttype == BCMA_HOSTTYPE_SOC)
- platform_device_unregister(bus->drv_cc.watchdog);
-+
-+ /* Now noone uses internally-handled cores, we can free them */
-+ list_for_each_entry_safe(core, tmp, &bus->cores, list) {
-+ list_del(&core->list);
-+ kfree(core);
-+ }
- }
-
- int bcma_bus_register(struct bcma_bus *bus)
-@@ -369,10 +388,6 @@ int bcma_bus_register(struct bcma_bus *b
- int err;
- struct bcma_device *core;
-
-- mutex_lock(&bcma_buses_mutex);
-- bus->num = bcma_bus_next_num++;
-- mutex_unlock(&bcma_buses_mutex);
--
- /* Scan for devices (cores) */
- err = bcma_bus_scan(bus);
- if (err) {
-@@ -387,6 +402,13 @@ int bcma_bus_register(struct bcma_bus *b
- bcma_core_chipcommon_early_init(&bus->drv_cc);
- }
-
-+ /* Early init PCIE core */
-+ core = bcma_find_core(bus, BCMA_CORE_PCIE);
-+ if (core) {
-+ bus->drv_pci[0].core = core;
-+ bcma_core_pci_early_init(&bus->drv_pci[0]);
-+ }
-+
- /* Cores providing flash access go before SPROM init */
- list_for_each_entry(core, &bus->cores, list) {
- if (bcma_is_core_needed_early(core->id.id))
-@@ -459,7 +481,6 @@ int bcma_bus_register(struct bcma_bus *b
-
- void bcma_bus_unregister(struct bcma_bus *bus)
- {
-- struct bcma_device *cores[3];
- int err;
-
- err = bcma_gpio_unregister(&bus->drv_cc);
-@@ -470,46 +491,23 @@ void bcma_bus_unregister(struct bcma_bus
-
- bcma_core_chipcommon_b_free(&bus->drv_cc_b);
-
-- cores[0] = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
-- cores[1] = bcma_find_core(bus, BCMA_CORE_PCIE);
-- cores[2] = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
--
- bcma_unregister_cores(bus);
--
-- kfree(cores[2]);
-- kfree(cores[1]);
-- kfree(cores[0]);
- }
-
--int __init bcma_bus_early_register(struct bcma_bus *bus,
-- struct bcma_device *core_cc,
-- struct bcma_device *core_mips)
-+/*
-+ * This is a special version of bus registration function designed for SoCs.
-+ * It scans bus and performs basic initialization of main cores only.
-+ * Please note it requires memory allocation, however it won't try to sleep.
-+ */
-+int __init bcma_bus_early_register(struct bcma_bus *bus)
- {
- int err;
- struct bcma_device *core;
-- struct bcma_device_id match;
--
-- match.manuf = BCMA_MANUF_BCM;
-- match.id = bcma_cc_core_id(bus);
-- match.class = BCMA_CL_SIM;
-- match.rev = BCMA_ANY_REV;
-
-- /* Scan for chip common core */
-- err = bcma_bus_scan_early(bus, &match, core_cc);
-- if (err) {
-- bcma_err(bus, "Failed to scan for common core: %d\n", err);
-- return -1;
-- }
--
-- match.manuf = BCMA_MANUF_MIPS;
-- match.id = BCMA_CORE_MIPS_74K;
-- match.class = BCMA_CL_SIM;
-- match.rev = BCMA_ANY_REV;
--
-- /* Scan for mips core */
-- err = bcma_bus_scan_early(bus, &match, core_mips);
-+ /* Scan for devices (cores) */
-+ err = bcma_bus_scan(bus);
- if (err) {
-- bcma_err(bus, "Failed to scan for mips core: %d\n", err);
-+ bcma_err(bus, "Failed to scan bus: %d\n", err);
- return -1;
- }
-
---- a/drivers/bcma/scan.c
-+++ b/drivers/bcma/scan.c
-@@ -435,15 +435,12 @@ static int bcma_get_next_core(struct bcm
- return 0;
- }
-
--void bcma_init_bus(struct bcma_bus *bus)
-+void bcma_detect_chip(struct bcma_bus *bus)
- {
- s32 tmp;
- struct bcma_chipinfo *chipinfo = &(bus->chipinfo);
- char chip_id[8];
-
-- INIT_LIST_HEAD(&bus->cores);
-- bus->nr_cores = 0;
--
- bcma_scan_switch_core(bus, BCMA_ADDR_BASE);
-
- tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID);
-@@ -464,6 +461,10 @@ int bcma_bus_scan(struct bcma_bus *bus)
-
- int err, core_num = 0;
-
-+ /* Skip if bus was already scanned (e.g. during early register) */
-+ if (bus->nr_cores)
-+ return 0;
-+
- erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
- if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
- eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE);
-@@ -519,64 +520,6 @@ int bcma_bus_scan(struct bcma_bus *bus)
- out:
- if (bus->hosttype == BCMA_HOSTTYPE_SOC)
- iounmap(eromptr);
--
-- return err;
--}
--
--int __init bcma_bus_scan_early(struct bcma_bus *bus,
-- struct bcma_device_id *match,
-- struct bcma_device *core)
--{
-- u32 erombase;
-- u32 __iomem *eromptr, *eromend;
--
-- int err = -ENODEV;
-- int core_num = 0;
--
-- erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
-- if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
-- eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE);
-- if (!eromptr)
-- return -ENOMEM;
-- } else {
-- eromptr = bus->mmio;
-- }
--
-- eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
--
-- bcma_scan_switch_core(bus, erombase);
--
-- while (eromptr < eromend) {
-- memset(core, 0, sizeof(*core));
-- INIT_LIST_HEAD(&core->list);
-- core->bus = bus;
--
-- err = bcma_get_next_core(bus, &eromptr, match, core_num, core);
-- if (err == -ENODEV) {
-- core_num++;
-- continue;
-- } else if (err == -ENXIO)
-- continue;
-- else if (err == -ESPIPE)
-- break;
-- else if (err < 0)
-- goto out;
--
-- core->core_index = core_num++;
-- bus->nr_cores++;
-- bcma_info(bus, "Core %d found: %s (manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
-- core->core_index, bcma_device_name(&core->id),
-- core->id.manuf, core->id.id, core->id.rev,
-- core->id.class);
--
-- list_add_tail(&core->list, &bus->cores);
-- err = 0;
-- break;
-- }
--
--out:
-- if (bus->hosttype == BCMA_HOSTTYPE_SOC)
-- iounmap(eromptr);
-
- return err;
- }
---- a/drivers/bcma/sprom.c
-+++ b/drivers/bcma/sprom.c
-@@ -579,7 +579,8 @@ int bcma_sprom_get(struct bcma_bus *bus)
- u16 offset = BCMA_CC_SPROM;
- u16 *sprom;
- size_t sprom_sizes[] = { SSB_SPROMSIZE_WORDS_R4,
-- SSB_SPROMSIZE_WORDS_R10, };
-+ SSB_SPROMSIZE_WORDS_R10,
-+ SSB_SPROMSIZE_WORDS_R11, };
- int i, err = 0;
-
- if (!bus->drv_cc.core)
---- a/include/linux/bcma/bcma.h
-+++ b/include/linux/bcma/bcma.h
-@@ -319,6 +319,7 @@ struct bcma_bus {
- const struct bcma_host_ops *ops;
-
- enum bcma_hosttype hosttype;
-+ bool host_is_pcie2; /* Used for BCMA_HOSTTYPE_PCI only */
- union {
- /* Pointer to the PCI bus (only for BCMA_HOSTTYPE_PCI) */
- struct pci_dev *host_pci;
---- a/include/linux/bcma/bcma_driver_pci.h
-+++ b/include/linux/bcma/bcma_driver_pci.h
-@@ -223,6 +223,7 @@ struct bcma_drv_pci_host {
-
- struct bcma_drv_pci {
- struct bcma_device *core;
-+ u8 early_setup_done:1;
- u8 setup_done:1;
- u8 hostmode:1;
-
-@@ -237,6 +238,7 @@ struct bcma_drv_pci {
- #define pcicore_write16(pc, offset, val) bcma_write16((pc)->core, offset, val)
- #define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val)
-
-+extern void bcma_core_pci_early_init(struct bcma_drv_pci *pc);
- extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
- extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
- struct bcma_device *core, bool enable);
---- a/include/linux/bcma/bcma_regs.h
-+++ b/include/linux/bcma/bcma_regs.h
-@@ -64,6 +64,8 @@
- #define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */
- #define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */
-
-+#define BCMA_PCIE2_BAR0_WIN2 0x70
-+
- /* SiliconBackplane Address Map.
- * All regions may not exist on all chips.
- */
---- a/include/linux/bcma/bcma_soc.h
-+++ b/include/linux/bcma/bcma_soc.h
-@@ -5,8 +5,6 @@
-
- struct bcma_soc {
- struct bcma_bus bus;
-- struct bcma_device core_cc;
-- struct bcma_device core_mips;
- };
-
- int __init bcma_host_soc_register(struct bcma_soc *soc);
---- a/include/linux/ssb/ssb_regs.h
-+++ b/include/linux/ssb/ssb_regs.h
-@@ -173,6 +173,7 @@
- #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
- #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
- #define SSB_SPROMSIZE_WORDS_R10 230
-+#define SSB_SPROMSIZE_WORDS_R11 234
- #define SSB_SPROM_BASE1 0x1000
- #define SSB_SPROM_BASE31 0x0800
- #define SSB_SPROM_REVISION 0x007E
+++ /dev/null
---- a/drivers/bcma/bcma_private.h
-+++ b/drivers/bcma/bcma_private.h
-@@ -24,6 +24,7 @@ bool bcma_wait_value(struct bcma_device
- int timeout);
- void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core);
- void bcma_init_bus(struct bcma_bus *bus);
-+void bcma_unregister_cores(struct bcma_bus *bus);
- int bcma_bus_register(struct bcma_bus *bus);
- void bcma_bus_unregister(struct bcma_bus *bus);
- int __init bcma_bus_early_register(struct bcma_bus *bus);
-@@ -40,6 +41,9 @@ int bcma_bus_scan(struct bcma_bus *bus);
- int bcma_sprom_get(struct bcma_bus *bus);
-
- /* driver_chipcommon.c */
-+void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc);
-+void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
-+void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable);
- #ifdef CONFIG_BCMA_DRIVER_MIPS
- void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
- extern struct platform_device bcma_pflash_dev;
-@@ -50,6 +54,8 @@ int bcma_core_chipcommon_b_init(struct b
- void bcma_core_chipcommon_b_free(struct bcma_drv_cc_b *ccb);
-
- /* driver_chipcommon_pmu.c */
-+void bcma_pmu_early_init(struct bcma_drv_cc *cc);
-+void bcma_pmu_init(struct bcma_drv_cc *cc);
- u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc);
- u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc);
-
-@@ -98,7 +104,35 @@ static inline void __exit bcma_host_soc_
- #endif /* CONFIG_BCMA_HOST_SOC && CONFIG_OF */
-
- /* driver_pci.c */
-+#ifdef CONFIG_BCMA_DRIVER_PCI
- u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address);
-+void bcma_core_pci_early_init(struct bcma_drv_pci *pc);
-+void bcma_core_pci_init(struct bcma_drv_pci *pc);
-+void bcma_core_pci_up(struct bcma_drv_pci *pc);
-+void bcma_core_pci_down(struct bcma_drv_pci *pc);
-+#else
-+static inline void bcma_core_pci_early_init(struct bcma_drv_pci *pc)
-+{
-+ WARN_ON(pc->core->bus->hosttype == BCMA_HOSTTYPE_PCI);
-+}
-+static inline void bcma_core_pci_init(struct bcma_drv_pci *pc)
-+{
-+ /* Initialization is required for PCI hosted bus */
-+ WARN_ON(pc->core->bus->hosttype == BCMA_HOSTTYPE_PCI);
-+}
-+#endif
-+
-+/* driver_pcie2.c */
-+#ifdef CONFIG_BCMA_DRIVER_PCI
-+void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2);
-+void bcma_core_pcie2_up(struct bcma_drv_pcie2 *pcie2);
-+#else
-+static inline void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2)
-+{
-+ /* Initialization is required for PCI hosted bus */
-+ WARN_ON(pcie2->core->bus->hosttype == BCMA_HOSTTYPE_PCI);
-+}
-+#endif
-
- extern int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc);
-
-@@ -115,6 +149,39 @@ static inline void bcma_core_pci_hostmod
- }
- #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
-
-+/**************************************************
-+ * driver_mips.c
-+ **************************************************/
-+
-+#ifdef CONFIG_BCMA_DRIVER_MIPS
-+unsigned int bcma_core_mips_irq(struct bcma_device *dev);
-+void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
-+void bcma_core_mips_init(struct bcma_drv_mips *mcore);
-+#else
-+static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev)
-+{
-+ return 0;
-+}
-+static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
-+{
-+}
-+static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore)
-+{
-+}
-+#endif
-+
-+/**************************************************
-+ * driver_gmac_cmn.c
-+ **************************************************/
-+
-+#ifdef CONFIG_BCMA_DRIVER_GMAC_CMN
-+void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc);
-+#else
-+static inline void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc)
-+{
-+}
-+#endif
-+
- #ifdef CONFIG_BCMA_DRIVER_GPIO
- /* driver_gpio.c */
- int bcma_gpio_init(struct bcma_drv_cc *cc);
---- a/drivers/bcma/driver_gpio.c
-+++ b/drivers/bcma/driver_gpio.c
-@@ -17,6 +17,8 @@
-
- #include "bcma_private.h"
-
-+#define BCMA_GPIO_MAX_PINS 32
-+
- static inline struct bcma_drv_cc *bcma_gpio_get_cc(struct gpio_chip *chip)
- {
- return container_of(chip, struct bcma_drv_cc, gpio);
-@@ -76,7 +78,7 @@ static void bcma_gpio_free(struct gpio_c
- bcma_chipco_gpio_pullup(cc, 1 << gpio, 0);
- }
-
--#if IS_BUILTIN(CONFIG_BCM47XX)
-+#if IS_BUILTIN(CONFIG_BCM47XX) || IS_BUILTIN(CONFIG_ARCH_BCM_5301X)
- static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
- {
- struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
-@@ -204,6 +206,7 @@ static void bcma_gpio_irq_domain_exit(st
-
- int bcma_gpio_init(struct bcma_drv_cc *cc)
- {
-+ struct bcma_bus *bus = cc->core->bus;
- struct gpio_chip *chip = &cc->gpio;
- int err;
-
-@@ -215,14 +218,14 @@ int bcma_gpio_init(struct bcma_drv_cc *c
- chip->set = bcma_gpio_set_value;
- chip->direction_input = bcma_gpio_direction_input;
- chip->direction_output = bcma_gpio_direction_output;
--#if IS_BUILTIN(CONFIG_BCM47XX)
-+#if IS_BUILTIN(CONFIG_BCM47XX) || IS_BUILTIN(CONFIG_ARCH_BCM_5301X)
- chip->to_irq = bcma_gpio_to_irq;
- #endif
- #if IS_BUILTIN(CONFIG_OF)
- if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
- chip->of_node = cc->core->dev.of_node;
- #endif
-- switch (cc->core->bus->chipinfo.id) {
-+ switch (bus->chipinfo.id) {
- case BCMA_CHIP_ID_BCM5357:
- case BCMA_CHIP_ID_BCM53572:
- chip->ngpio = 32;
-@@ -231,13 +234,17 @@ int bcma_gpio_init(struct bcma_drv_cc *c
- chip->ngpio = 16;
- }
-
-- /* There is just one SoC in one device and its GPIO addresses should be
-- * deterministic to address them more easily. The other buses could get
-- * a random base number. */
-- if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
-- chip->base = 0;
-- else
-- chip->base = -1;
-+ /*
-+ * On MIPS we register GPIO devices (LEDs, buttons) using absolute GPIO
-+ * pin numbers. We don't have Device Tree there and we can't really use
-+ * relative (per chip) numbers.
-+ * So let's use predictable base for BCM47XX and "random" for all other.
-+ */
-+#if IS_BUILTIN(CONFIG_BCM47XX)
-+ chip->base = bus->num * BCMA_GPIO_MAX_PINS;
-+#else
-+ chip->base = -1;
-+#endif
-
- err = bcma_gpio_irq_domain_init(cc);
- if (err)
---- a/drivers/bcma/driver_pci.c
-+++ b/drivers/bcma/driver_pci.c
-@@ -282,39 +282,6 @@ void bcma_core_pci_power_save(struct bcm
- }
- EXPORT_SYMBOL_GPL(bcma_core_pci_power_save);
-
--int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
-- bool enable)
--{
-- struct pci_dev *pdev;
-- u32 coremask, tmp;
-- int err = 0;
--
-- if (!pc || core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
-- /* This bcma device is not on a PCI host-bus. So the IRQs are
-- * not routed through the PCI core.
-- * So we must not enable routing through the PCI core. */
-- goto out;
-- }
--
-- pdev = pc->core->bus->host_pci;
--
-- err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
-- if (err)
-- goto out;
--
-- coremask = BIT(core->core_index) << 8;
-- if (enable)
-- tmp |= coremask;
-- else
-- tmp &= ~coremask;
--
-- err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
--
--out:
-- return err;
--}
--EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl);
--
- static void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend)
- {
- u32 w;
-@@ -328,28 +295,12 @@ static void bcma_core_pci_extend_L1timer
- bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG);
- }
-
--void bcma_core_pci_up(struct bcma_bus *bus)
-+void bcma_core_pci_up(struct bcma_drv_pci *pc)
- {
-- struct bcma_drv_pci *pc;
--
-- if (bus->hosttype != BCMA_HOSTTYPE_PCI)
-- return;
--
-- pc = &bus->drv_pci[0];
--
- bcma_core_pci_extend_L1timer(pc, true);
- }
--EXPORT_SYMBOL_GPL(bcma_core_pci_up);
-
--void bcma_core_pci_down(struct bcma_bus *bus)
-+void bcma_core_pci_down(struct bcma_drv_pci *pc)
- {
-- struct bcma_drv_pci *pc;
--
-- if (bus->hosttype != BCMA_HOSTTYPE_PCI)
-- return;
--
-- pc = &bus->drv_pci[0];
--
- bcma_core_pci_extend_L1timer(pc, false);
- }
--EXPORT_SYMBOL_GPL(bcma_core_pci_down);
---- a/drivers/bcma/driver_pci_host.c
-+++ b/drivers/bcma/driver_pci_host.c
-@@ -11,6 +11,7 @@
-
- #include "bcma_private.h"
- #include <linux/pci.h>
-+#include <linux/slab.h>
- #include <linux/export.h>
- #include <linux/bcma/bcma.h>
- #include <asm/paccess.h>
---- a/drivers/bcma/driver_pcie2.c
-+++ b/drivers/bcma/driver_pcie2.c
-@@ -10,6 +10,7 @@
-
- #include "bcma_private.h"
- #include <linux/bcma/bcma.h>
-+#include <linux/pci.h>
-
- /**************************************************
- * R/W ops.
-@@ -156,14 +157,23 @@ static void pciedev_reg_pm_clk_period(st
-
- void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2)
- {
-- struct bcma_chipinfo *ci = &pcie2->core->bus->chipinfo;
-+ struct bcma_bus *bus = pcie2->core->bus;
-+ struct bcma_chipinfo *ci = &bus->chipinfo;
- u32 tmp;
-
- tmp = pcie2_read32(pcie2, BCMA_CORE_PCIE2_SPROM(54));
- if ((tmp & 0xe) >> 1 == 2)
- bcma_core_pcie2_cfg_write(pcie2, 0x4e0, 0x17);
-
-- /* TODO: Do we need pcie_reqsize? */
-+ switch (bus->chipinfo.id) {
-+ case BCMA_CHIP_ID_BCM4360:
-+ case BCMA_CHIP_ID_BCM4352:
-+ pcie2->reqsize = 1024;
-+ break;
-+ default:
-+ pcie2->reqsize = 128;
-+ break;
-+ }
-
- if (ci->id == BCMA_CHIP_ID_BCM4360 && ci->rev > 3)
- bcma_core_pcie2_war_delay_perst_enab(pcie2, true);
-@@ -173,3 +183,18 @@ void bcma_core_pcie2_init(struct bcma_dr
- pciedev_crwlpciegen2_180(pcie2);
- pciedev_crwlpciegen2_182(pcie2);
- }
-+
-+/**************************************************
-+ * Runtime ops.
-+ **************************************************/
-+
-+void bcma_core_pcie2_up(struct bcma_drv_pcie2 *pcie2)
-+{
-+ struct bcma_bus *bus = pcie2->core->bus;
-+ struct pci_dev *dev = bus->host_pci;
-+ int err;
-+
-+ err = pcie_set_readrq(dev, pcie2->reqsize);
-+ if (err)
-+ bcma_err(bus, "Error setting PCI_EXP_DEVCTL_READRQ: %d\n", err);
-+}
---- a/drivers/bcma/host_pci.c
-+++ b/drivers/bcma/host_pci.c
-@@ -213,16 +213,26 @@ static int bcma_host_pci_probe(struct pc
- /* Initialize struct, detect chip */
- bcma_init_bus(bus);
-
-+ /* Scan bus to find out generation of PCIe core */
-+ err = bcma_bus_scan(bus);
-+ if (err)
-+ goto err_pci_unmap_mmio;
-+
-+ if (bcma_find_core(bus, BCMA_CORE_PCIE2))
-+ bus->host_is_pcie2 = true;
-+
- /* Register */
- err = bcma_bus_register(bus);
- if (err)
-- goto err_pci_unmap_mmio;
-+ goto err_unregister_cores;
-
- pci_set_drvdata(dev, bus);
-
- out:
- return err;
-
-+err_unregister_cores:
-+ bcma_unregister_cores(bus);
- err_pci_unmap_mmio:
- pci_iounmap(dev, bus->mmio);
- err_pci_release_regions:
-@@ -283,9 +293,12 @@ static const struct pci_device_id bcma_p
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
-+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4360) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) },
-+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a0) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a9) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43aa) },
-+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43b1) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43227) }, /* 0xa8db, BCM43217 (sic!) */
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43228) }, /* 0xa8dc */
-@@ -310,3 +323,65 @@ void __exit bcma_host_pci_exit(void)
- {
- pci_unregister_driver(&bcma_pci_bridge_driver);
- }
-+
-+/**************************************************
-+ * Runtime ops for drivers.
-+ **************************************************/
-+
-+/* See also pcicore_up */
-+void bcma_host_pci_up(struct bcma_bus *bus)
-+{
-+ if (bus->hosttype != BCMA_HOSTTYPE_PCI)
-+ return;
-+
-+ if (bus->host_is_pcie2)
-+ bcma_core_pcie2_up(&bus->drv_pcie2);
-+ else
-+ bcma_core_pci_up(&bus->drv_pci[0]);
-+}
-+EXPORT_SYMBOL_GPL(bcma_host_pci_up);
-+
-+/* See also pcicore_down */
-+void bcma_host_pci_down(struct bcma_bus *bus)
-+{
-+ if (bus->hosttype != BCMA_HOSTTYPE_PCI)
-+ return;
-+
-+ if (!bus->host_is_pcie2)
-+ bcma_core_pci_down(&bus->drv_pci[0]);
-+}
-+EXPORT_SYMBOL_GPL(bcma_host_pci_down);
-+
-+/* See also si_pci_setup */
-+int bcma_host_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core,
-+ bool enable)
-+{
-+ struct pci_dev *pdev;
-+ u32 coremask, tmp;
-+ int err = 0;
-+
-+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) {
-+ /* This bcma device is not on a PCI host-bus. So the IRQs are
-+ * not routed through the PCI core.
-+ * So we must not enable routing through the PCI core. */
-+ goto out;
-+ }
-+
-+ pdev = bus->host_pci;
-+
-+ err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
-+ if (err)
-+ goto out;
-+
-+ coremask = BIT(core->core_index) << 8;
-+ if (enable)
-+ tmp |= coremask;
-+ else
-+ tmp &= ~coremask;
-+
-+ err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
-+
-+out:
-+ return err;
-+}
-+EXPORT_SYMBOL_GPL(bcma_host_pci_irq_ctl);
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -363,7 +363,7 @@ static int bcma_register_devices(struct
- return 0;
- }
-
--static void bcma_unregister_cores(struct bcma_bus *bus)
-+void bcma_unregister_cores(struct bcma_bus *bus)
- {
- struct bcma_device *core, *tmp;
-
---- a/drivers/net/wireless/b43/main.c
-+++ b/drivers/net/wireless/b43/main.c
-@@ -4770,7 +4770,7 @@ static void b43_wireless_core_exit(struc
- switch (dev->dev->bus_type) {
- #ifdef CONFIG_B43_BCMA
- case B43_BUS_BCMA:
-- bcma_core_pci_down(dev->dev->bdev->bus);
-+ bcma_host_pci_down(dev->dev->bdev->bus);
- break;
- #endif
- #ifdef CONFIG_B43_SSB
-@@ -4817,9 +4817,9 @@ static int b43_wireless_core_init(struct
- switch (dev->dev->bus_type) {
- #ifdef CONFIG_B43_BCMA
- case B43_BUS_BCMA:
-- bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci[0],
-+ bcma_host_pci_irq_ctl(dev->dev->bdev->bus,
- dev->dev->bdev, true);
-- bcma_core_pci_up(dev->dev->bdev->bus);
-+ bcma_host_pci_up(dev->dev->bdev->bus);
- break;
- #endif
- #ifdef CONFIG_B43_SSB
---- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
-+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
-@@ -4669,7 +4669,7 @@ static int brcms_b_attach(struct brcms_c
- brcms_c_coredisable(wlc_hw);
-
- /* Match driver "down" state */
-- bcma_core_pci_down(wlc_hw->d11core->bus);
-+ bcma_host_pci_down(wlc_hw->d11core->bus);
-
- /* turn off pll and xtal to match driver "down" state */
- brcms_b_xtal(wlc_hw, OFF);
-@@ -4960,7 +4960,7 @@ static int brcms_b_up_prep(struct brcms_
- * Configure pci/pcmcia here instead of in brcms_c_attach()
- * to allow mfg hotswap: down, hotswap (chip power cycle), up.
- */
-- bcma_core_pci_irq_ctl(&wlc_hw->d11core->bus->drv_pci[0], wlc_hw->d11core,
-+ bcma_host_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core,
- true);
-
- /*
-@@ -4970,12 +4970,12 @@ static int brcms_b_up_prep(struct brcms_
- */
- if (brcms_b_radio_read_hwdisabled(wlc_hw)) {
- /* put SB PCI in down state again */
-- bcma_core_pci_down(wlc_hw->d11core->bus);
-+ bcma_host_pci_down(wlc_hw->d11core->bus);
- brcms_b_xtal(wlc_hw, OFF);
- return -ENOMEDIUM;
- }
-
-- bcma_core_pci_up(wlc_hw->d11core->bus);
-+ bcma_host_pci_up(wlc_hw->d11core->bus);
-
- /* reset the d11 core */
- brcms_b_corereset(wlc_hw, BRCMS_USE_COREFLAGS);
-@@ -5172,7 +5172,7 @@ static int brcms_b_down_finish(struct br
-
- /* turn off primary xtal and pll */
- if (!wlc_hw->noreset) {
-- bcma_core_pci_down(wlc_hw->d11core->bus);
-+ bcma_host_pci_down(wlc_hw->d11core->bus);
- brcms_b_xtal(wlc_hw, OFF);
- }
- }
---- a/include/linux/bcma/bcma.h
-+++ b/include/linux/bcma/bcma.h
-@@ -435,6 +435,27 @@ static inline struct bcma_device *bcma_f
- return bcma_find_core_unit(bus, coreid, 0);
- }
-
-+#ifdef CONFIG_BCMA_HOST_PCI
-+extern void bcma_host_pci_up(struct bcma_bus *bus);
-+extern void bcma_host_pci_down(struct bcma_bus *bus);
-+extern int bcma_host_pci_irq_ctl(struct bcma_bus *bus,
-+ struct bcma_device *core, bool enable);
-+#else
-+static inline void bcma_host_pci_up(struct bcma_bus *bus)
-+{
-+}
-+static inline void bcma_host_pci_down(struct bcma_bus *bus)
-+{
-+}
-+static inline int bcma_host_pci_irq_ctl(struct bcma_bus *bus,
-+ struct bcma_device *core, bool enable)
-+{
-+ if (bus->hosttype == BCMA_HOSTTYPE_PCI)
-+ return -ENOTSUPP;
-+ return 0;
-+}
-+#endif
-+
- extern bool bcma_core_is_enabled(struct bcma_device *core);
- extern void bcma_core_disable(struct bcma_device *core, u32 flags);
- extern int bcma_core_enable(struct bcma_device *core, u32 flags);
---- a/include/linux/bcma/bcma_driver_pci.h
-+++ b/include/linux/bcma/bcma_driver_pci.h
-@@ -238,13 +238,13 @@ struct bcma_drv_pci {
- #define pcicore_write16(pc, offset, val) bcma_write16((pc)->core, offset, val)
- #define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val)
-
--extern void bcma_core_pci_early_init(struct bcma_drv_pci *pc);
--extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
--extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
-- struct bcma_device *core, bool enable);
--extern void bcma_core_pci_up(struct bcma_bus *bus);
--extern void bcma_core_pci_down(struct bcma_bus *bus);
-+#ifdef CONFIG_BCMA_DRIVER_PCI
- extern void bcma_core_pci_power_save(struct bcma_bus *bus, bool up);
-+#else
-+static inline void bcma_core_pci_power_save(struct bcma_bus *bus, bool up)
-+{
-+}
-+#endif
-
- extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev);
- extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev);
---- a/include/linux/bcma/bcma_driver_pcie2.h
-+++ b/include/linux/bcma/bcma_driver_pcie2.h
-@@ -143,6 +143,8 @@
-
- struct bcma_drv_pcie2 {
- struct bcma_device *core;
-+
-+ u16 reqsize;
- };
-
- #define pcie2_read16(pcie2, offset) bcma_read16((pcie2)->core, offset)
-@@ -153,6 +155,4 @@ struct bcma_drv_pcie2 {
- #define pcie2_set32(pcie2, offset, set) bcma_set32((pcie2)->core, offset, set)
- #define pcie2_mask32(pcie2, offset, mask) bcma_mask32((pcie2)->core, offset, mask)
-
--void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2);
--
- #endif /* LINUX_BCMA_DRIVER_PCIE2_H_ */
---- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -26,6 +26,7 @@ config BCMA_HOST_PCI_POSSIBLE
- config BCMA_HOST_PCI
- bool "Support for BCMA on PCI-host bus"
- depends on BCMA_HOST_PCI_POSSIBLE
-+ select BCMA_DRIVER_PCI
- default y
-
- config BCMA_DRIVER_PCI_HOSTMODE
-@@ -44,6 +45,22 @@ config BCMA_HOST_SOC
-
- If unsure, say N
-
-+config BCMA_DRIVER_PCI
-+ bool "BCMA Broadcom PCI core driver"
-+ depends on BCMA && PCI
-+ default y
-+ help
-+ BCMA bus may have many versions of PCIe core. This driver
-+ supports:
-+ 1) PCIe core working in clientmode
-+ 2) PCIe Gen 2 clientmode core
-+
-+ In general PCIe (Gen 2) clientmode core is required on PCIe
-+ hosted buses. It's responsible for initialization and basic
-+ hardware management.
-+ This driver is also prerequisite for a hostmode PCIe core
-+ support.
-+
- config BCMA_DRIVER_MIPS
- bool "BCMA Broadcom MIPS core driver"
- depends on BCMA && MIPS
---- a/drivers/bcma/Makefile
-+++ b/drivers/bcma/Makefile
-@@ -3,8 +3,8 @@ bcma-y += driver_chipcommon.o driver
- bcma-y += driver_chipcommon_b.o
- bcma-$(CONFIG_BCMA_SFLASH) += driver_chipcommon_sflash.o
- bcma-$(CONFIG_BCMA_NFLASH) += driver_chipcommon_nflash.o
--bcma-y += driver_pci.o
--bcma-y += driver_pcie2.o
-+bcma-$(CONFIG_BCMA_DRIVER_PCI) += driver_pci.o
-+bcma-$(CONFIG_BCMA_DRIVER_PCI) += driver_pcie2.o
- bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o
- bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o
- bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN) += driver_gmac_cmn.o
---- a/include/linux/bcma/bcma_driver_chipcommon.h
-+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -663,14 +663,6 @@ struct bcma_drv_cc_b {
- #define bcma_cc_maskset32(cc, offset, mask, set) \
- bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
-
--extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
--extern void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc);
--
--extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
--extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
--
--void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable);
--
- extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
-
- extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc);
-@@ -690,9 +682,6 @@ u32 bcma_chipco_gpio_pullup(struct bcma_
- u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value);
-
- /* PMU support */
--extern void bcma_pmu_init(struct bcma_drv_cc *cc);
--extern void bcma_pmu_early_init(struct bcma_drv_cc *cc);
--
- extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset,
- u32 value);
- extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset,
---- a/include/linux/bcma/bcma_driver_gmac_cmn.h
-+++ b/include/linux/bcma/bcma_driver_gmac_cmn.h
-@@ -91,10 +91,4 @@ struct bcma_drv_gmac_cmn {
- #define gmac_cmn_write16(gc, offset, val) bcma_write16((gc)->core, offset, val)
- #define gmac_cmn_write32(gc, offset, val) bcma_write32((gc)->core, offset, val)
-
--#ifdef CONFIG_BCMA_DRIVER_GMAC_CMN
--extern void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc);
--#else
--static inline void bcma_core_gmac_cmn_init(struct bcma_drv_gmac_cmn *gc) { }
--#endif
--
- #endif /* LINUX_BCMA_DRIVER_GMAC_CMN_H_ */
---- a/include/linux/bcma/bcma_driver_mips.h
-+++ b/include/linux/bcma/bcma_driver_mips.h
-@@ -39,21 +39,6 @@ struct bcma_drv_mips {
- u8 early_setup_done:1;
- };
-
--#ifdef CONFIG_BCMA_DRIVER_MIPS
--extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
--extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
--
--extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
--#else
--static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
--static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
--
--static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev)
--{
-- return 0;
--}
--#endif
--
- extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore);
-
- #endif /* LINUX_BCMA_DRIVER_MIPS_H_ */
+++ /dev/null
---- a/drivers/bcma/driver_gpio.c
-+++ b/drivers/bcma/driver_gpio.c
-@@ -226,6 +226,7 @@ int bcma_gpio_init(struct bcma_drv_cc *c
- chip->of_node = cc->core->dev.of_node;
- #endif
- switch (bus->chipinfo.id) {
-+ case BCMA_CHIP_ID_BCM4707:
- case BCMA_CHIP_ID_BCM5357:
- case BCMA_CHIP_ID_BCM53572:
- chip->ngpio = 32;
-@@ -235,16 +236,17 @@ int bcma_gpio_init(struct bcma_drv_cc *c
- }
-
- /*
-- * On MIPS we register GPIO devices (LEDs, buttons) using absolute GPIO
-- * pin numbers. We don't have Device Tree there and we can't really use
-- * relative (per chip) numbers.
-- * So let's use predictable base for BCM47XX and "random" for all other.
-+ * Register SoC GPIO devices with absolute GPIO pin base.
-+ * On MIPS, we don't have Device Tree and we can't use relative (per chip)
-+ * GPIO numbers.
-+ * On some ARM devices, user space may want to access some system GPIO
-+ * pins directly, which is easier to do with a predictable GPIO base.
- */
--#if IS_BUILTIN(CONFIG_BCM47XX)
-- chip->base = bus->num * BCMA_GPIO_MAX_PINS;
--#else
-- chip->base = -1;
--#endif
-+ if (IS_BUILTIN(CONFIG_BCM47XX) ||
-+ cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
-+ chip->base = bus->num * BCMA_GPIO_MAX_PINS;
-+ else
-+ chip->base = -1;
-
- err = bcma_gpio_irq_domain_init(cc);
- if (err)
---- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -29,12 +29,6 @@ config BCMA_HOST_PCI
- select BCMA_DRIVER_PCI
- default y
-
--config BCMA_DRIVER_PCI_HOSTMODE
-- bool "Driver for PCI core working in hostmode"
-- depends on BCMA && MIPS && BCMA_HOST_PCI
-- help
-- PCI core hostmode operation (external PCI bus).
--
- config BCMA_HOST_SOC
- bool "Support for BCMA in a SoC"
- depends on BCMA
-@@ -61,6 +55,12 @@ config BCMA_DRIVER_PCI
- This driver is also prerequisite for a hostmode PCIe core
- support.
-
-+config BCMA_DRIVER_PCI_HOSTMODE
-+ bool "Driver for PCI core working in hostmode"
-+ depends on BCMA && MIPS && BCMA_DRIVER_PCI
-+ help
-+ PCI core hostmode operation (external PCI bus).
-+
- config BCMA_DRIVER_MIPS
- bool "BCMA Broadcom MIPS core driver"
- depends on BCMA && MIPS
---- a/include/linux/bcma/bcma_driver_pci.h
-+++ b/include/linux/bcma/bcma_driver_pci.h
-@@ -246,7 +246,18 @@ static inline void bcma_core_pci_power_s
- }
- #endif
-
-+#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
- extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev);
- extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev);
-+#else
-+static inline int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev)
-+{
-+ return -ENOTSUPP;
-+}
-+static inline int bcma_core_pci_plat_dev_init(struct pci_dev *dev)
-+{
-+ return -ENOTSUPP;
-+}
-+#endif
-
- #endif /* LINUX_BCMA_DRIVER_PCI_H_ */
+++ /dev/null
-commit 55acca90da52b85299c033354e51ddaa7b73e019
-Author: Hante Meuleman <meuleman@broadcom.com>
-Date: Fri Sep 18 22:08:17 2015 +0200
-
- brcmfmac: Add support for the BCM4365 and BCM4366 PCIE devices.
-
- This patch adds support for the BCM4365 and BCM4366 11ac Wave2
- PCIE devices.
-
- Reviewed-by: Arend Van Spriel <arend@broadcom.com>
- Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
- Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
- Signed-off-by: Arend van Spriel <arend@broadcom.com>
- Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
-
---- a/include/linux/bcma/bcma.h
-+++ b/include/linux/bcma/bcma.h
-@@ -151,6 +151,8 @@ struct bcma_host_ops {
- #define BCMA_CORE_PCIE2 0x83C /* PCI Express Gen2 */
- #define BCMA_CORE_USB30_DEV 0x83D
- #define BCMA_CORE_ARM_CR4 0x83E
-+#define BCMA_CORE_ARM_CA7 0x847
-+#define BCMA_CORE_SYS_MEM 0x849
- #define BCMA_CORE_DEFAULT 0xFFF
-
- #define BCMA_MAX_NR_CORES 16
+++ /dev/null
---- /dev/null
-+++ b/include/linux/bcm47xx_nvram.h
-@@ -0,0 +1,49 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#ifndef __BCM47XX_NVRAM_H
-+#define __BCM47XX_NVRAM_H
-+
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/vmalloc.h>
-+
-+#ifdef CONFIG_BCM47XX_NVRAM
-+int bcm47xx_nvram_init_from_mem(u32 base, u32 lim);
-+int bcm47xx_nvram_getenv(const char *name, char *val, size_t val_len);
-+int bcm47xx_nvram_gpio_pin(const char *name);
-+char *bcm47xx_nvram_get_contents(size_t *val_len);
-+static inline void bcm47xx_nvram_release_contents(char *nvram)
-+{
-+ vfree(nvram);
-+};
-+#else
-+static inline int bcm47xx_nvram_init_from_mem(u32 base, u32 lim)
-+{
-+ return -ENOTSUPP;
-+};
-+static inline int bcm47xx_nvram_getenv(const char *name, char *val,
-+ size_t val_len)
-+{
-+ return -ENOTSUPP;
-+};
-+static inline int bcm47xx_nvram_gpio_pin(const char *name)
-+{
-+ return -ENOTSUPP;
-+};
-+
-+static inline char *bcm47xx_nvram_get_contents(size_t *val_len)
-+{
-+ return NULL;
-+};
-+
-+static inline void bcm47xx_nvram_release_contents(char *nvram)
-+{
-+};
-+#endif
-+
-+#endif /* __BCM47XX_NVRAM_H */
+++ /dev/null
-From: Vadim Kochan <vadim4j@gmail.com>
-Date: Mon, 12 Jan 2015 16:34:05 +0200
-Subject: [PATCH] nl80211: Allow set network namespace by fd
-
-Added new NL80211_ATTR_NETNS_FD which allows to
-set namespace via nl80211 by fd.
-
-Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/core/net_namespace.c
-+++ b/net/core/net_namespace.c
-@@ -361,6 +361,7 @@ struct net *get_net_ns_by_fd(int fd)
- return ERR_PTR(-EINVAL);
- }
- #endif
-+EXPORT_SYMBOL_GPL(get_net_ns_by_fd);
-
- struct net *get_net_ns_by_pid(pid_t pid)
- {
+++ /dev/null
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -637,11 +637,36 @@ static int bcma_device_uevent(struct dev
- core->id.rev, core->id.class);
- }
-
--static int __init bcma_modinit(void)
-+static unsigned int bcma_bus_registered;
-+
-+/*
-+ * If built-in, bus has to be registered early, before any driver calls
-+ * bcma_driver_register.
-+ * Otherwise registering driver would trigger BUG in driver_register.
-+ */
-+static int __init bcma_init_bus_register(void)
- {
- int err;
-
-+ if (bcma_bus_registered)
-+ return 0;
-+
- err = bus_register(&bcma_bus_type);
-+ if (!err)
-+ bcma_bus_registered = 1;
-+
-+ return err;
-+}
-+#ifndef MODULE
-+fs_initcall(bcma_init_bus_register);
-+#endif
-+
-+/* Main initialization has to be done with SPI/mtd/NAND/SPROM available */
-+static int __init bcma_modinit(void)
-+{
-+ int err;
-+
-+ err = bcma_init_bus_register();
- if (err)
- return err;
-
-@@ -660,7 +685,7 @@ static int __init bcma_modinit(void)
-
- return err;
- }
--fs_initcall(bcma_modinit);
-+module_init(bcma_modinit);
-
- static void __exit bcma_modexit(void)
- {
+++ /dev/null
---- a/drivers/bcma/driver_chipcommon.c
-+++ b/drivers/bcma/driver_chipcommon.c
-@@ -15,6 +15,8 @@
- #include <linux/platform_device.h>
- #include <linux/bcma/bcma.h>
-
-+static void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
-+
- static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
- u32 mask, u32 value)
- {
-@@ -113,8 +115,37 @@ int bcma_chipco_watchdog_register(struct
- return 0;
- }
-
-+static void bcma_core_chipcommon_flash_detect(struct bcma_drv_cc *cc)
-+{
-+ struct bcma_bus *bus = cc->core->bus;
-+
-+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
-+ case BCMA_CC_FLASHT_STSER:
-+ case BCMA_CC_FLASHT_ATSER:
-+ bcma_debug(bus, "Found serial flash\n");
-+ bcma_sflash_init(cc);
-+ break;
-+ case BCMA_CC_FLASHT_PARA:
-+ bcma_debug(bus, "Found parallel flash\n");
-+ bcma_pflash_init(cc);
-+ break;
-+ default:
-+ bcma_err(bus, "Flash type not supported\n");
-+ }
-+
-+ if (cc->core->id.rev == 38 ||
-+ bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) {
-+ if (cc->capabilities & BCMA_CC_CAP_NFLASH) {
-+ bcma_debug(bus, "Found NAND flash\n");
-+ bcma_nflash_init(cc);
-+ }
-+ }
-+}
-+
- void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc)
- {
-+ struct bcma_bus *bus = cc->core->bus;
-+
- if (cc->early_setup_done)
- return;
-
-@@ -129,6 +160,12 @@ void bcma_core_chipcommon_early_init(str
- if (cc->capabilities & BCMA_CC_CAP_PMU)
- bcma_pmu_early_init(cc);
-
-+ if (IS_BUILTIN(CONFIG_BCM47XX) && bus->hosttype == BCMA_HOSTTYPE_SOC)
-+ bcma_chipco_serial_init(cc);
-+
-+ if (bus->hosttype == BCMA_HOSTTYPE_SOC)
-+ bcma_core_chipcommon_flash_detect(cc);
-+
- cc->early_setup_done = true;
- }
-
-@@ -185,11 +222,12 @@ u32 bcma_chipco_watchdog_timer_set(struc
- ticks = 2;
- else if (ticks > maxt)
- ticks = maxt;
-- bcma_cc_write32(cc, BCMA_CC_PMU_WATCHDOG, ticks);
-+ bcma_pmu_write32(cc, BCMA_CC_PMU_WATCHDOG, ticks);
- } else {
- struct bcma_bus *bus = cc->core->bus;
-
- if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4707 &&
-+ bus->chipinfo.id != BCMA_CHIP_ID_BCM47094 &&
- bus->chipinfo.id != BCMA_CHIP_ID_BCM53018)
- bcma_core_set_clockmode(cc->core,
- ticks ? BCMA_CLKMODE_FAST : BCMA_CLKMODE_DYNAMIC);
-@@ -314,9 +352,9 @@ u32 bcma_chipco_gpio_pulldown(struct bcm
- return res;
- }
-
--#ifdef CONFIG_BCMA_DRIVER_MIPS
--void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
-+static void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
- {
-+#if IS_BUILTIN(CONFIG_BCM47XX)
- unsigned int irq;
- u32 baud_base;
- u32 i;
-@@ -358,5 +396,5 @@ void bcma_chipco_serial_init(struct bcma
- ports[i].baud_base = baud_base;
- ports[i].reg_shift = 0;
- }
-+#endif /* CONFIG_BCM47XX */
- }
--#endif /* CONFIG_BCMA_DRIVER_MIPS */
---- a/drivers/bcma/driver_chipcommon_pmu.c
-+++ b/drivers/bcma/driver_chipcommon_pmu.c
-@@ -15,44 +15,44 @@
-
- u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
- {
-- bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
-- bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
-- return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
-+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR, offset);
-+ bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_ADDR);
-+ return bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_DATA);
- }
- EXPORT_SYMBOL_GPL(bcma_chipco_pll_read);
-
- void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value)
- {
-- bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
-- bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
-- bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value);
-+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR, offset);
-+ bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_ADDR);
-+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_DATA, value);
- }
- EXPORT_SYMBOL_GPL(bcma_chipco_pll_write);
-
- void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask,
- u32 set)
- {
-- bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
-- bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
-- bcma_cc_maskset32(cc, BCMA_CC_PLLCTL_DATA, mask, set);
-+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR, offset);
-+ bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_ADDR);
-+ bcma_pmu_maskset32(cc, BCMA_CC_PMU_PLLCTL_DATA, mask, set);
- }
- EXPORT_SYMBOL_GPL(bcma_chipco_pll_maskset);
-
- void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
- u32 offset, u32 mask, u32 set)
- {
-- bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset);
-- bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
-- bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL_DATA, mask, set);
-+ bcma_pmu_write32(cc, BCMA_CC_PMU_CHIPCTL_ADDR, offset);
-+ bcma_pmu_read32(cc, BCMA_CC_PMU_CHIPCTL_ADDR);
-+ bcma_pmu_maskset32(cc, BCMA_CC_PMU_CHIPCTL_DATA, mask, set);
- }
- EXPORT_SYMBOL_GPL(bcma_chipco_chipctl_maskset);
-
- void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask,
- u32 set)
- {
-- bcma_cc_write32(cc, BCMA_CC_REGCTL_ADDR, offset);
-- bcma_cc_read32(cc, BCMA_CC_REGCTL_ADDR);
-- bcma_cc_maskset32(cc, BCMA_CC_REGCTL_DATA, mask, set);
-+ bcma_pmu_write32(cc, BCMA_CC_PMU_REGCTL_ADDR, offset);
-+ bcma_pmu_read32(cc, BCMA_CC_PMU_REGCTL_ADDR);
-+ bcma_pmu_maskset32(cc, BCMA_CC_PMU_REGCTL_DATA, mask, set);
- }
- EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);
-
-@@ -60,18 +60,18 @@ static u32 bcma_pmu_xtalfreq(struct bcma
- {
- u32 ilp_ctl, alp_hz;
-
-- if (!(bcma_cc_read32(cc, BCMA_CC_PMU_STAT) &
-+ if (!(bcma_pmu_read32(cc, BCMA_CC_PMU_STAT) &
- BCMA_CC_PMU_STAT_EXT_LPO_AVAIL))
- return 0;
-
-- bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ,
-- BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT));
-+ bcma_pmu_write32(cc, BCMA_CC_PMU_XTAL_FREQ,
-+ BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT));
- usleep_range(1000, 2000);
-
-- ilp_ctl = bcma_cc_read32(cc, BCMA_CC_PMU_XTAL_FREQ);
-+ ilp_ctl = bcma_pmu_read32(cc, BCMA_CC_PMU_XTAL_FREQ);
- ilp_ctl &= BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK;
-
-- bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0);
-+ bcma_pmu_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0);
-
- alp_hz = ilp_ctl * 32768 / 4;
- return (alp_hz + 50000) / 100000 * 100;
-@@ -127,8 +127,8 @@ static void bcma_pmu2_pll_init0(struct b
- mask = (u32)~(BCMA_RES_4314_HT_AVAIL |
- BCMA_RES_4314_MACPHY_CLK_AVAIL);
-
-- bcma_cc_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask);
-- bcma_cc_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask);
-+ bcma_pmu_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask);
-+ bcma_pmu_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask);
- bcma_wait_value(cc->core, BCMA_CLKCTLST,
- BCMA_CLKCTLST_HAVEHT, 0, 20000);
- break;
-@@ -140,7 +140,7 @@ static void bcma_pmu2_pll_init0(struct b
-
- /* Flush */
- if (cc->pmu.rev >= 2)
-- bcma_cc_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD);
-+ bcma_pmu_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD);
-
- /* TODO: Do we need to update OTP? */
- }
-@@ -195,9 +195,9 @@ static void bcma_pmu_resources_init(stru
-
- /* Set the resource masks. */
- if (min_msk)
-- bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk);
-+ bcma_pmu_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk);
- if (max_msk)
-- bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
-+ bcma_pmu_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
-
- /*
- * Add some delay; allow resources to come up and settle.
-@@ -269,23 +269,33 @@ static void bcma_pmu_workarounds(struct
-
- void bcma_pmu_early_init(struct bcma_drv_cc *cc)
- {
-+ struct bcma_bus *bus = cc->core->bus;
- u32 pmucap;
-
-- pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP);
-+ if (cc->core->id.rev >= 35 &&
-+ cc->capabilities_ext & BCMA_CC_CAP_EXT_AOB_PRESENT) {
-+ cc->pmu.core = bcma_find_core(bus, BCMA_CORE_PMU);
-+ if (!cc->pmu.core)
-+ bcma_warn(bus, "Couldn't find expected PMU core");
-+ }
-+ if (!cc->pmu.core)
-+ cc->pmu.core = cc->core;
-+
-+ pmucap = bcma_pmu_read32(cc, BCMA_CC_PMU_CAP);
- cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION);
-
-- bcma_debug(cc->core->bus, "Found rev %u PMU (capabilities 0x%08X)\n",
-- cc->pmu.rev, pmucap);
-+ bcma_debug(bus, "Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev,
-+ pmucap);
- }
-
- void bcma_pmu_init(struct bcma_drv_cc *cc)
- {
- if (cc->pmu.rev == 1)
-- bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
-- ~BCMA_CC_PMU_CTL_NOILPONW);
-+ bcma_pmu_mask32(cc, BCMA_CC_PMU_CTL,
-+ ~BCMA_CC_PMU_CTL_NOILPONW);
- else
-- bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
-- BCMA_CC_PMU_CTL_NOILPONW);
-+ bcma_pmu_set32(cc, BCMA_CC_PMU_CTL,
-+ BCMA_CC_PMU_CTL_NOILPONW);
-
- bcma_pmu_pll_init(cc);
- bcma_pmu_resources_init(cc);
-@@ -472,8 +482,8 @@ u32 bcma_pmu_get_cpu_clock(struct bcma_d
- static void bcma_pmu_spuravoid_pll_write(struct bcma_drv_cc *cc, u32 offset,
- u32 value)
- {
-- bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
-- bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value);
-+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR, offset);
-+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_DATA, value);
- }
-
- void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid)
-@@ -497,20 +507,20 @@ void bcma_pmu_spuravoid_pllupdate(struct
- bus->chipinfo.id == BCMA_CHIP_ID_BCM53572) ? 6 : 0;
-
- /* RMW only the P1 divider */
-- bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR,
-+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR,
- BCMA_CC_PMU_PLL_CTL0 + phypll_offset);
-- tmp = bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
-+ tmp = bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_DATA);
- tmp &= (~(BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK));
- tmp |= (bcm5357_bcm43236_p1div[spuravoid] << BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT);
-- bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
-+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_DATA, tmp);
-
- /* RMW only the int feedback divider */
-- bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR,
-+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_ADDR,
- BCMA_CC_PMU_PLL_CTL2 + phypll_offset);
-- tmp = bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
-+ tmp = bcma_pmu_read32(cc, BCMA_CC_PMU_PLLCTL_DATA);
- tmp &= ~(BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK);
- tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
-- bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
-+ bcma_pmu_write32(cc, BCMA_CC_PMU_PLLCTL_DATA, tmp);
-
- tmp = BCMA_CC_PMU_CTL_PLL_UPD;
- break;
-@@ -646,7 +656,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
- break;
- }
-
-- tmp |= bcma_cc_read32(cc, BCMA_CC_PMU_CTL);
-- bcma_cc_write32(cc, BCMA_CC_PMU_CTL, tmp);
-+ tmp |= bcma_pmu_read32(cc, BCMA_CC_PMU_CTL);
-+ bcma_pmu_write32(cc, BCMA_CC_PMU_CTL, tmp);
- }
- EXPORT_SYMBOL_GPL(bcma_pmu_spuravoid_pllupdate);
---- a/drivers/bcma/driver_chipcommon_sflash.c
-+++ b/drivers/bcma/driver_chipcommon_sflash.c
-@@ -38,6 +38,7 @@ static const struct bcma_sflash_tbl_e bc
- { "M25P32", 0x15, 0x10000, 64, },
- { "M25P64", 0x16, 0x10000, 128, },
- { "M25FL128", 0x17, 0x10000, 256, },
-+ { "MX25L25635F", 0x18, 0x10000, 512, },
- { NULL },
- };
-
---- a/drivers/bcma/scan.c
-+++ b/drivers/bcma/scan.c
-@@ -98,6 +98,9 @@ static const struct bcma_device_id_name
- { BCMA_CORE_SHIM, "SHIM" },
- { BCMA_CORE_PCIE2, "PCIe Gen2" },
- { BCMA_CORE_ARM_CR4, "ARM CR4" },
-+ { BCMA_CORE_GCI, "GCI" },
-+ { BCMA_CORE_CMEM, "CNDS DDR2/3 memory controller" },
-+ { BCMA_CORE_ARM_CA7, "ARM CA7" },
- { BCMA_CORE_DEFAULT, "Default" },
- };
-
-@@ -315,6 +318,8 @@ static int bcma_get_next_core(struct bcm
- switch (core->id.id) {
- case BCMA_CORE_4706_MAC_GBIT_COMMON:
- case BCMA_CORE_NS_CHIPCOMMON_B:
-+ case BCMA_CORE_PMU:
-+ case BCMA_CORE_GCI:
- /* Not used yet: case BCMA_CORE_OOB_ROUTER: */
- break;
- default:
---- a/drivers/net/wireless/b43/main.c
-+++ b/drivers/net/wireless/b43/main.c
-@@ -1215,10 +1215,10 @@ void b43_wireless_core_phy_pll_reset(str
- case B43_BUS_BCMA:
- bcma_cc = &dev->dev->bdev->bus->drv_cc;
-
-- bcma_cc_write32(bcma_cc, BCMA_CC_CHIPCTL_ADDR, 0);
-- bcma_cc_mask32(bcma_cc, BCMA_CC_CHIPCTL_DATA, ~0x4);
-- bcma_cc_set32(bcma_cc, BCMA_CC_CHIPCTL_DATA, 0x4);
-- bcma_cc_mask32(bcma_cc, BCMA_CC_CHIPCTL_DATA, ~0x4);
-+ bcma_cc_write32(bcma_cc, BCMA_CC_PMU_CHIPCTL_ADDR, 0);
-+ bcma_cc_mask32(bcma_cc, BCMA_CC_PMU_CHIPCTL_DATA, ~0x4);
-+ bcma_cc_set32(bcma_cc, BCMA_CC_PMU_CHIPCTL_DATA, 0x4);
-+ bcma_cc_mask32(bcma_cc, BCMA_CC_PMU_CHIPCTL_DATA, ~0x4);
- break;
- #endif
- #ifdef CONFIG_B43_SSB
---- a/include/linux/bcma/bcma.h
-+++ b/include/linux/bcma/bcma.h
-@@ -151,6 +151,8 @@ struct bcma_host_ops {
- #define BCMA_CORE_PCIE2 0x83C /* PCI Express Gen2 */
- #define BCMA_CORE_USB30_DEV 0x83D
- #define BCMA_CORE_ARM_CR4 0x83E
-+#define BCMA_CORE_GCI 0x840
-+#define BCMA_CORE_CMEM 0x846 /* CNDS DDR2/3 memory controller */
- #define BCMA_CORE_ARM_CA7 0x847
- #define BCMA_CORE_SYS_MEM 0x849
- #define BCMA_CORE_DEFAULT 0xFFF
-@@ -200,6 +202,7 @@ struct bcma_host_ops {
- #define BCMA_PKG_ID_BCM4707 1
- #define BCMA_PKG_ID_BCM4708 2
- #define BCMA_PKG_ID_BCM4709 0
-+#define BCMA_CHIP_ID_BCM47094 53030
- #define BCMA_CHIP_ID_BCM53018 53018
-
- /* Board types (on PCI usually equals to the subsystem dev id) */
---- a/include/linux/bcma/bcma_driver_chipcommon.h
-+++ b/include/linux/bcma/bcma_driver_chipcommon.h
-@@ -217,6 +217,11 @@
- #define BCMA_CC_CLKDIV_JTAG_SHIFT 8
- #define BCMA_CC_CLKDIV_UART 0x000000FF
- #define BCMA_CC_CAP_EXT 0x00AC /* Capabilities */
-+#define BCMA_CC_CAP_EXT_SECI_PRESENT 0x00000001
-+#define BCMA_CC_CAP_EXT_GSIO_PRESENT 0x00000002
-+#define BCMA_CC_CAP_EXT_GCI_PRESENT 0x00000004
-+#define BCMA_CC_CAP_EXT_SECI_PUART_PRESENT 0x00000008 /* UART present */
-+#define BCMA_CC_CAP_EXT_AOB_PRESENT 0x00000040
- #define BCMA_CC_PLLONDELAY 0x00B0 /* Rev >= 4 only */
- #define BCMA_CC_FREFSELDELAY 0x00B4 /* Rev >= 4 only */
- #define BCMA_CC_SLOWCLKCTL 0x00B8 /* 6 <= Rev <= 9 only */
-@@ -351,12 +356,12 @@
- #define BCMA_CC_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */
- #define BCMA_CC_PMU_RES_REQT 0x0644 /* PMU res req timer */
- #define BCMA_CC_PMU_RES_REQM 0x0648 /* PMU res req mask */
--#define BCMA_CC_CHIPCTL_ADDR 0x0650
--#define BCMA_CC_CHIPCTL_DATA 0x0654
--#define BCMA_CC_REGCTL_ADDR 0x0658
--#define BCMA_CC_REGCTL_DATA 0x065C
--#define BCMA_CC_PLLCTL_ADDR 0x0660
--#define BCMA_CC_PLLCTL_DATA 0x0664
-+#define BCMA_CC_PMU_CHIPCTL_ADDR 0x0650
-+#define BCMA_CC_PMU_CHIPCTL_DATA 0x0654
-+#define BCMA_CC_PMU_REGCTL_ADDR 0x0658
-+#define BCMA_CC_PMU_REGCTL_DATA 0x065C
-+#define BCMA_CC_PMU_PLLCTL_ADDR 0x0660
-+#define BCMA_CC_PMU_PLLCTL_DATA 0x0664
- #define BCMA_CC_PMU_STRAPOPT 0x0668 /* (corerev >= 28) */
- #define BCMA_CC_PMU_XTAL_FREQ 0x066C /* (pmurev >= 10) */
- #define BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK 0x00001FFF
-@@ -566,17 +571,16 @@
- * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
- */
- struct bcma_chipcommon_pmu {
-+ struct bcma_device *core; /* Can be separated core or just ChipCommon one */
- u8 rev; /* PMU revision */
- u32 crystalfreq; /* The active crystal frequency (in kHz) */
- };
-
--#ifdef CONFIG_BCMA_DRIVER_MIPS
-+#ifdef CONFIG_BCMA_PFLASH
- struct bcma_pflash {
- bool present;
-- u8 buswidth;
-- u32 window;
-- u32 window_size;
- };
-+#endif
-
- #ifdef CONFIG_BCMA_SFLASH
- struct bcma_sflash {
-@@ -602,6 +606,7 @@ struct bcma_nflash {
- };
- #endif
-
-+#ifdef CONFIG_BCMA_DRIVER_MIPS
- struct bcma_serial_port {
- void *regs;
- unsigned long clockspeed;
-@@ -621,8 +626,9 @@ struct bcma_drv_cc {
- /* Fast Powerup Delay constant */
- u16 fast_pwrup_delay;
- struct bcma_chipcommon_pmu pmu;
--#ifdef CONFIG_BCMA_DRIVER_MIPS
-+#ifdef CONFIG_BCMA_PFLASH
- struct bcma_pflash pflash;
-+#endif
- #ifdef CONFIG_BCMA_SFLASH
- struct bcma_sflash sflash;
- #endif
-@@ -630,6 +636,7 @@ struct bcma_drv_cc {
- struct bcma_nflash nflash;
- #endif
-
-+#ifdef CONFIG_BCMA_DRIVER_MIPS
- int nr_serial_ports;
- struct bcma_serial_port serial_ports[4];
- #endif /* CONFIG_BCMA_DRIVER_MIPS */
-@@ -663,6 +670,19 @@ struct bcma_drv_cc_b {
- #define bcma_cc_maskset32(cc, offset, mask, set) \
- bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
-
-+/* PMU registers access */
-+#define bcma_pmu_read32(cc, offset) \
-+ bcma_read32((cc)->pmu.core, offset)
-+#define bcma_pmu_write32(cc, offset, val) \
-+ bcma_write32((cc)->pmu.core, offset, val)
-+
-+#define bcma_pmu_mask32(cc, offset, mask) \
-+ bcma_pmu_write32(cc, offset, bcma_pmu_read32(cc, offset) & (mask))
-+#define bcma_pmu_set32(cc, offset, set) \
-+ bcma_pmu_write32(cc, offset, bcma_pmu_read32(cc, offset) | (set))
-+#define bcma_pmu_maskset32(cc, offset, mask, set) \
-+ bcma_pmu_write32(cc, offset, (bcma_pmu_read32(cc, offset) & (mask)) | (set))
-+
- extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
-
- extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc);
---- a/drivers/bcma/bcma_private.h
-+++ b/drivers/bcma/bcma_private.h
-@@ -44,10 +44,6 @@ int bcma_sprom_get(struct bcma_bus *bus)
- void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc);
- void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
- void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable);
--#ifdef CONFIG_BCMA_DRIVER_MIPS
--void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
--extern struct platform_device bcma_pflash_dev;
--#endif /* CONFIG_BCMA_DRIVER_MIPS */
-
- /* driver_chipcommon_b.c */
- int bcma_core_chipcommon_b_init(struct bcma_drv_cc_b *ccb);
-@@ -59,6 +55,21 @@ void bcma_pmu_init(struct bcma_drv_cc *c
- u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc);
- u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc);
-
-+/**************************************************
-+ * driver_chipcommon_sflash.c
-+ **************************************************/
-+
-+#ifdef CONFIG_BCMA_PFLASH
-+extern struct platform_device bcma_pflash_dev;
-+int bcma_pflash_init(struct bcma_drv_cc *cc);
-+#else
-+static inline int bcma_pflash_init(struct bcma_drv_cc *cc)
-+{
-+ bcma_err(cc->core->bus, "Parallel flash not supported\n");
-+ return 0;
-+}
-+#endif /* CONFIG_BCMA_PFLASH */
-+
- #ifdef CONFIG_BCMA_SFLASH
- /* driver_chipcommon_sflash.c */
- int bcma_sflash_init(struct bcma_drv_cc *cc);
---- a/drivers/bcma/driver_gpio.c
-+++ b/drivers/bcma/driver_gpio.c
-@@ -229,6 +229,7 @@ int bcma_gpio_init(struct bcma_drv_cc *c
- case BCMA_CHIP_ID_BCM4707:
- case BCMA_CHIP_ID_BCM5357:
- case BCMA_CHIP_ID_BCM53572:
-+ case BCMA_CHIP_ID_BCM47094:
- chip->ngpio = 32;
- break;
- default:
---- a/drivers/bcma/driver_mips.c
-+++ b/drivers/bcma/driver_mips.c
-@@ -14,8 +14,6 @@
-
- #include <linux/bcma/bcma.h>
-
--#include <linux/mtd/physmap.h>
--#include <linux/platform_device.h>
- #include <linux/serial.h>
- #include <linux/serial_core.h>
- #include <linux/serial_reg.h>
-@@ -29,26 +27,6 @@ enum bcma_boot_dev {
- BCMA_BOOT_DEV_NAND,
- };
-
--static const char * const part_probes[] = { "bcm47xxpart", NULL };
--
--static struct physmap_flash_data bcma_pflash_data = {
-- .part_probe_types = part_probes,
--};
--
--static struct resource bcma_pflash_resource = {
-- .name = "bcma_pflash",
-- .flags = IORESOURCE_MEM,
--};
--
--struct platform_device bcma_pflash_dev = {
-- .name = "physmap-flash",
-- .dev = {
-- .platform_data = &bcma_pflash_data,
-- },
-- .resource = &bcma_pflash_resource,
-- .num_resources = 1,
--};
--
- /* The 47162a0 hangs when reading MIPS DMP registers registers */
- static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev)
- {
-@@ -269,48 +247,11 @@ static enum bcma_boot_dev bcma_boot_dev(
- return BCMA_BOOT_DEV_SERIAL;
- }
-
--static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
-+static void bcma_core_mips_nvram_init(struct bcma_drv_mips *mcore)
- {
- struct bcma_bus *bus = mcore->core->bus;
-- struct bcma_drv_cc *cc = &bus->drv_cc;
-- struct bcma_pflash *pflash = &cc->pflash;
- enum bcma_boot_dev boot_dev;
-
-- switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
-- case BCMA_CC_FLASHT_STSER:
-- case BCMA_CC_FLASHT_ATSER:
-- bcma_debug(bus, "Found serial flash\n");
-- bcma_sflash_init(cc);
-- break;
-- case BCMA_CC_FLASHT_PARA:
-- bcma_debug(bus, "Found parallel flash\n");
-- pflash->present = true;
-- pflash->window = BCMA_SOC_FLASH2;
-- pflash->window_size = BCMA_SOC_FLASH2_SZ;
--
-- if ((bcma_read32(cc->core, BCMA_CC_FLASH_CFG) &
-- BCMA_CC_FLASH_CFG_DS) == 0)
-- pflash->buswidth = 1;
-- else
-- pflash->buswidth = 2;
--
-- bcma_pflash_data.width = pflash->buswidth;
-- bcma_pflash_resource.start = pflash->window;
-- bcma_pflash_resource.end = pflash->window + pflash->window_size;
--
-- break;
-- default:
-- bcma_err(bus, "Flash type not supported\n");
-- }
--
-- if (cc->core->id.rev == 38 ||
-- bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) {
-- if (cc->capabilities & BCMA_CC_CAP_NFLASH) {
-- bcma_debug(bus, "Found NAND flash\n");
-- bcma_nflash_init(cc);
-- }
-- }
--
- /* Determine flash type this SoC boots from */
- boot_dev = bcma_boot_dev(bus);
- switch (boot_dev) {
-@@ -328,13 +269,10 @@ static void bcma_core_mips_flash_detect(
-
- void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
- {
-- struct bcma_bus *bus = mcore->core->bus;
--
- if (mcore->early_setup_done)
- return;
-
-- bcma_chipco_serial_init(&bus->drv_cc);
-- bcma_core_mips_flash_detect(mcore);
-+ bcma_core_mips_nvram_init(mcore);
-
- mcore->early_setup_done = true;
- }
---- a/drivers/bcma/host_pci.c
-+++ b/drivers/bcma/host_pci.c
-@@ -294,7 +294,7 @@ static const struct pci_device_id bcma_p
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4360) },
-- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) },
-+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_BROADCOM, 0x4365, PCI_VENDOR_ID_DELL, 0x0016) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a0) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a9) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43aa) },
---- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -70,6 +70,11 @@ config BCMA_DRIVER_MIPS
-
- If unsure, say N
-
-+config BCMA_PFLASH
-+ bool
-+ depends on BCMA_DRIVER_MIPS
-+ default y
-+
- config BCMA_SFLASH
- bool
- depends on BCMA_DRIVER_MIPS
---- a/drivers/bcma/Makefile
-+++ b/drivers/bcma/Makefile
-@@ -1,6 +1,7 @@
- bcma-y += main.o scan.o core.o sprom.o
- bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o
- bcma-y += driver_chipcommon_b.o
-+bcma-$(CONFIG_BCMA_PFLASH) += driver_chipcommon_pflash.o
- bcma-$(CONFIG_BCMA_SFLASH) += driver_chipcommon_sflash.o
- bcma-$(CONFIG_BCMA_NFLASH) += driver_chipcommon_nflash.o
- bcma-$(CONFIG_BCMA_DRIVER_PCI) += driver_pci.o
---- /dev/null
-+++ b/drivers/bcma/driver_chipcommon_pflash.c
-@@ -0,0 +1,49 @@
-+/*
-+ * Broadcom specific AMBA
-+ * ChipCommon parallel flash
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include "bcma_private.h"
-+
-+#include <linux/bcma/bcma.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/platform_device.h>
-+
-+static const char * const part_probes[] = { "bcm47xxpart", NULL };
-+
-+static struct physmap_flash_data bcma_pflash_data = {
-+ .part_probe_types = part_probes,
-+};
-+
-+static struct resource bcma_pflash_resource = {
-+ .name = "bcma_pflash",
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+struct platform_device bcma_pflash_dev = {
-+ .name = "physmap-flash",
-+ .dev = {
-+ .platform_data = &bcma_pflash_data,
-+ },
-+ .resource = &bcma_pflash_resource,
-+ .num_resources = 1,
-+};
-+
-+int bcma_pflash_init(struct bcma_drv_cc *cc)
-+{
-+ struct bcma_pflash *pflash = &cc->pflash;
-+
-+ pflash->present = true;
-+
-+ if (!(bcma_read32(cc->core, BCMA_CC_FLASH_CFG) & BCMA_CC_FLASH_CFG_DS))
-+ bcma_pflash_data.width = 1;
-+ else
-+ bcma_pflash_data.width = 2;
-+
-+ bcma_pflash_resource.start = BCMA_SOC_FLASH2;
-+ bcma_pflash_resource.end = BCMA_SOC_FLASH2 + BCMA_SOC_FLASH2_SZ;
-+
-+ return 0;
-+}
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -325,7 +325,7 @@ static int bcma_register_devices(struct
- bcma_register_core(bus, core);
- }
-
--#ifdef CONFIG_BCMA_DRIVER_MIPS
-+#ifdef CONFIG_BCMA_PFLASH
- if (bus->drv_cc.pflash.present) {
- err = platform_device_register(&bcma_pflash_dev);
- if (err)
+++ /dev/null
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -15,8 +15,12 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-
--/* 10 parts were found on sflash on Netgear WNDR4500 */
--#define BCM47XXPART_MAX_PARTS 12
-+/*
-+ * NAND flash on Netgear R6250 was verified to contain 15 partitions.
-+ * This will result in allocating too big array for some old devices, but the
-+ * memory will be freed soon anyway (see mtd_device_parse_register).
-+ */
-+#define BCM47XXPART_MAX_PARTS 20
-
- /*
- * Amount of bytes we read when analyzing each block of flash memory.
-@@ -168,18 +172,26 @@ static int bcm47xxpart_parse(struct mtd_
- i++;
- }
-
-- bcm47xxpart_add_part(&parts[curr_part++], "linux",
-- offset + trx->offset[i], 0);
-- i++;
-+ if (trx->offset[i]) {
-+ bcm47xxpart_add_part(&parts[curr_part++],
-+ "linux",
-+ offset + trx->offset[i],
-+ 0);
-+ i++;
-+ }
-
- /*
- * Pure rootfs size is known and can be calculated as:
- * trx->length - trx->offset[i]. We don't fill it as
- * we want to have jffs2 (overlay) in the same mtd.
- */
-- bcm47xxpart_add_part(&parts[curr_part++], "rootfs",
-- offset + trx->offset[i], 0);
-- i++;
-+ if (trx->offset[i]) {
-+ bcm47xxpart_add_part(&parts[curr_part++],
-+ "rootfs",
-+ offset + trx->offset[i],
-+ 0);
-+ i++;
-+ }
-
- last_trx_part = curr_part - 1;
-
+++ /dev/null
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -15,6 +15,8 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-
-+#include <uapi/linux/magic.h>
-+
- /*
- * NAND flash on Netgear R6250 was verified to contain 15 partitions.
- * This will result in allocating too big array for some old devices, but the
-@@ -39,7 +41,8 @@
- #define ML_MAGIC1 0x39685a42
- #define ML_MAGIC2 0x26594131
- #define TRX_MAGIC 0x30524448
--#define SQSH_MAGIC 0x71736873 /* shsq */
-+#define SHSQ_MAGIC 0x71736873 /* shsq (weird ZTE H218N endianness) */
-+#define UBI_EC_MAGIC 0x23494255 /* UBI# */
-
- struct trx_header {
- uint32_t magic;
-@@ -50,7 +53,7 @@ struct trx_header {
- uint32_t offset[3];
- } __packed;
-
--static void bcm47xxpart_add_part(struct mtd_partition *part, char *name,
-+static void bcm47xxpart_add_part(struct mtd_partition *part, const char *name,
- u64 offset, uint32_t mask_flags)
- {
- part->name = name;
-@@ -58,6 +61,26 @@ static void bcm47xxpart_add_part(struct
- part->mask_flags = mask_flags;
- }
-
-+static const char *bcm47xxpart_trx_data_part_name(struct mtd_info *master,
-+ size_t offset)
-+{
-+ uint32_t buf;
-+ size_t bytes_read;
-+
-+ if (mtd_read(master, offset, sizeof(buf), &bytes_read,
-+ (uint8_t *)&buf) < 0) {
-+ pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
-+ offset);
-+ goto out_default;
-+ }
-+
-+ if (buf == UBI_EC_MAGIC)
-+ return "ubi";
-+
-+out_default:
-+ return "rootfs";
-+}
-+
- static int bcm47xxpart_parse(struct mtd_info *master,
- struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
-@@ -73,8 +96,12 @@ static int bcm47xxpart_parse(struct mtd_
- int last_trx_part = -1;
- int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
-
-- if (blocksize <= 0x10000)
-- blocksize = 0x10000;
-+ /*
-+ * Some really old flashes (like AT45DB*) had smaller erasesize-s, but
-+ * partitions were aligned to at least 0x1000 anyway.
-+ */
-+ if (blocksize < 0x1000)
-+ blocksize = 0x1000;
-
- /* Alloc */
- parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS,
-@@ -186,8 +213,11 @@ static int bcm47xxpart_parse(struct mtd_
- * we want to have jffs2 (overlay) in the same mtd.
- */
- if (trx->offset[i]) {
-+ const char *name;
-+
-+ name = bcm47xxpart_trx_data_part_name(master, offset + trx->offset[i]);
- bcm47xxpart_add_part(&parts[curr_part++],
-- "rootfs",
-+ name,
- offset + trx->offset[i],
- 0);
- i++;
-@@ -203,7 +233,8 @@ static int bcm47xxpart_parse(struct mtd_
- }
-
- /* Squashfs on devices not using TRX */
-- if (buf[0x000 / 4] == SQSH_MAGIC) {
-+ if (le32_to_cpu(buf[0x000 / 4]) == SQUASHFS_MAGIC ||
-+ buf[0x000 / 4] == SHSQ_MAGIC) {
- bcm47xxpart_add_part(&parts[curr_part++], "rootfs",
- offset, 0);
- continue;
+++ /dev/null
-mtd: spi-nor: support for (GigaDevice) GD25Q128B
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -510,6 +510,7 @@ static const struct spi_device_id spi_no
- /* GigaDevice */
- { "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) },
- { "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) },
-+ { "gd25q128", INFO(0xc84018, 0, 64 * 1024, 256, SECT_4K) },
-
- /* Intel/Numonyx -- xxxs33b */
- { "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) },
+++ /dev/null
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -310,11 +310,21 @@ static const struct spi_device_id m25p_i
- };
- MODULE_DEVICE_TABLE(spi, m25p_ids);
-
-+static const struct of_device_id m25p_of_table[] = {
-+ /*
-+ * Generic compatibility for SPI NOR that can be identified by the
-+ * JEDEC READ ID opcode (0x9F). Use this, if possible.
-+ */
-+ { .compatible = "jedec,spi-nor" },
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, m25p_of_table);
-
- static struct spi_driver m25p80_driver = {
- .driver = {
- .name = "m25p80",
- .owner = THIS_MODULE,
-+ .of_match_table = m25p_of_table,
- },
- .id_table = m25p_ids,
- .probe = m25p_probe,
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -934,8 +934,11 @@ int spi_nor_scan(struct spi_nor *nor, co
- if (ret)
- return ret;
-
-- id = spi_nor_match_id(name);
-+ if (name)
-+ id = spi_nor_match_id(name);
- if (!id)
-+ id = nor->read_id(nor);
-+ if (IS_ERR_OR_NULL(id))
- return -ENOENT;
-
- info = (void *)id->driver_data;
+++ /dev/null
-Subject: netfilter: conntrack: cache route for forwarded connections
-
-... to avoid per-packet FIB lookup if possible.
-
-The cached dst is re-used provided the input interface
-is the same as that of the previous packet in the same direction.
-
-If not, the cached dst is invalidated.
-
-For ipv6 we also need to store sernum, else dst_check doesn't work,
-pointed out by Eric Dumazet.
-
-This should speed up forwarding when conntrack is already in use
-anyway, especially when using reverse path filtering -- active RPF
-enforces two FIB lookups for each packet.
-
-Before the routing cache removal this didn't matter since RPF was performed
-only when route cache didn't yield a result; but without route cache it
-comes at higher price.
-
-Julian Anastasov suggested to add NETDEV_UNREGISTER handler to
-avoid holding on to dsts of 'frozen' conntracks.
-
-Signed-off-by: Florian Westphal <fw@strlen.de>
-
---- a/include/net/netfilter/nf_conntrack_extend.h
-+++ b/include/net/netfilter/nf_conntrack_extend.h
-@@ -30,6 +30,9 @@ enum nf_ct_ext_id {
- #if IS_ENABLED(CONFIG_NETFILTER_SYNPROXY)
- NF_CT_EXT_SYNPROXY,
- #endif
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_RTCACHE)
-+ NF_CT_EXT_RTCACHE,
-+#endif
- NF_CT_EXT_NUM,
- };
-
-@@ -43,6 +46,7 @@ enum nf_ct_ext_id {
- #define NF_CT_EXT_TIMEOUT_TYPE struct nf_conn_timeout
- #define NF_CT_EXT_LABELS_TYPE struct nf_conn_labels
- #define NF_CT_EXT_SYNPROXY_TYPE struct nf_conn_synproxy
-+#define NF_CT_EXT_RTCACHE_TYPE struct nf_conn_rtcache
-
- /* Extensions: optional stuff which isn't permanently in struct. */
- struct nf_ct_ext {
---- /dev/null
-+++ b/include/net/netfilter/nf_conntrack_rtcache.h
-@@ -0,0 +1,34 @@
-+#include <linux/gfp.h>
-+#include <net/netfilter/nf_conntrack.h>
-+#include <net/netfilter/nf_conntrack_extend.h>
-+
-+struct dst_entry;
-+
-+struct nf_conn_dst_cache {
-+ struct dst_entry *dst;
-+ int iif;
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
-+ u32 cookie;
-+#endif
-+
-+};
-+
-+struct nf_conn_rtcache {
-+ struct nf_conn_dst_cache cached_dst[IP_CT_DIR_MAX];
-+};
-+
-+static inline
-+struct nf_conn_rtcache *nf_ct_rtcache_find(const struct nf_conn *ct)
-+{
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_RTCACHE)
-+ return nf_ct_ext_find(ct, NF_CT_EXT_RTCACHE);
-+#else
-+ return NULL;
-+#endif
-+}
-+
-+static inline int nf_conn_rtcache_iif_get(const struct nf_conn_rtcache *rtc,
-+ enum ip_conntrack_dir dir)
-+{
-+ return rtc->cached_dst[dir].iif;
-+}
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -106,6 +106,18 @@ config NF_CONNTRACK_EVENTS
-
- If unsure, say `N'.
-
-+config NF_CONNTRACK_RTCACHE
-+ tristate "Cache route entries in conntrack objects"
-+ depends on NETFILTER_ADVANCED
-+ depends on NF_CONNTRACK
-+ help
-+ If this option is enabled, the connection tracking code will
-+ cache routing information for each connection that is being
-+ forwarded, at a cost of 32 bytes per conntrack object.
-+
-+ To compile it as a module, choose M here. If unsure, say N.
-+ The module will be called nf_conntrack_rtcache.
-+
- config NF_CONNTRACK_TIMEOUT
- bool 'Connection tracking timeout'
- depends on NETFILTER_ADVANCED
---- a/net/netfilter/Makefile
-+++ b/net/netfilter/Makefile
-@@ -18,6 +18,9 @@ obj-$(CONFIG_NETFILTER_NETLINK_LOG) += n
- # connection tracking
- obj-$(CONFIG_NF_CONNTRACK) += nf_conntrack.o
-
-+# optional conntrack route cache extension
-+obj-$(CONFIG_NF_CONNTRACK_RTCACHE) += nf_conntrack_rtcache.o
-+
- # SCTP protocol connection tracking
- obj-$(CONFIG_NF_CT_PROTO_DCCP) += nf_conntrack_proto_dccp.o
- obj-$(CONFIG_NF_CT_PROTO_GRE) += nf_conntrack_proto_gre.o
---- /dev/null
-+++ b/net/netfilter/nf_conntrack_rtcache.c
-@@ -0,0 +1,391 @@
-+/* route cache for netfilter.
-+ *
-+ * (C) 2014 Red Hat GmbH
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-+
-+#include <linux/types.h>
-+#include <linux/netfilter.h>
-+#include <linux/skbuff.h>
-+#include <linux/stddef.h>
-+#include <linux/kernel.h>
-+#include <linux/netdevice.h>
-+#include <linux/export.h>
-+#include <linux/module.h>
-+
-+#include <net/dst.h>
-+
-+#include <net/netfilter/nf_conntrack.h>
-+#include <net/netfilter/nf_conntrack_core.h>
-+#include <net/netfilter/nf_conntrack_extend.h>
-+#include <net/netfilter/nf_conntrack_rtcache.h>
-+
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
-+#include <net/ip6_fib.h>
-+#endif
-+
-+static void __nf_conn_rtcache_destroy(struct nf_conn_rtcache *rtc,
-+ enum ip_conntrack_dir dir)
-+{
-+ struct dst_entry *dst = rtc->cached_dst[dir].dst;
-+
-+ dst_release(dst);
-+}
-+
-+static void nf_conn_rtcache_destroy(struct nf_conn *ct)
-+{
-+ struct nf_conn_rtcache *rtc = nf_ct_rtcache_find(ct);
-+
-+ if (!rtc)
-+ return;
-+
-+ __nf_conn_rtcache_destroy(rtc, IP_CT_DIR_ORIGINAL);
-+ __nf_conn_rtcache_destroy(rtc, IP_CT_DIR_REPLY);
-+}
-+
-+static void nf_ct_rtcache_ext_add(struct nf_conn *ct)
-+{
-+ struct nf_conn_rtcache *rtc;
-+
-+ rtc = nf_ct_ext_add(ct, NF_CT_EXT_RTCACHE, GFP_ATOMIC);
-+ if (rtc) {
-+ rtc->cached_dst[IP_CT_DIR_ORIGINAL].iif = -1;
-+ rtc->cached_dst[IP_CT_DIR_ORIGINAL].dst = NULL;
-+ rtc->cached_dst[IP_CT_DIR_REPLY].iif = -1;
-+ rtc->cached_dst[IP_CT_DIR_REPLY].dst = NULL;
-+ }
-+}
-+
-+static struct nf_conn_rtcache *nf_ct_rtcache_find_usable(struct nf_conn *ct)
-+{
-+ if (nf_ct_is_untracked(ct))
-+ return NULL;
-+ return nf_ct_rtcache_find(ct);
-+}
-+
-+static struct dst_entry *
-+nf_conn_rtcache_dst_get(const struct nf_conn_rtcache *rtc,
-+ enum ip_conntrack_dir dir)
-+{
-+ return rtc->cached_dst[dir].dst;
-+}
-+
-+static u32 nf_rtcache_get_cookie(int pf, const struct dst_entry *dst)
-+{
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
-+ if (pf == NFPROTO_IPV6) {
-+ const struct rt6_info *rt = (const struct rt6_info *)dst;
-+
-+ if (rt->rt6i_node)
-+ return (u32)rt->rt6i_node->fn_sernum;
-+ }
-+#endif
-+ return 0;
-+}
-+
-+static void nf_conn_rtcache_dst_set(int pf,
-+ struct nf_conn_rtcache *rtc,
-+ struct dst_entry *dst,
-+ enum ip_conntrack_dir dir, int iif)
-+{
-+ if (rtc->cached_dst[dir].iif != iif)
-+ rtc->cached_dst[dir].iif = iif;
-+
-+ if (rtc->cached_dst[dir].dst != dst) {
-+ struct dst_entry *old;
-+
-+ dst_hold(dst);
-+
-+ old = xchg(&rtc->cached_dst[dir].dst, dst);
-+ dst_release(old);
-+
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
-+ if (pf == NFPROTO_IPV6)
-+ rtc->cached_dst[dir].cookie =
-+ nf_rtcache_get_cookie(pf, dst);
-+#endif
-+ }
-+}
-+
-+static void nf_conn_rtcache_dst_obsolete(struct nf_conn_rtcache *rtc,
-+ enum ip_conntrack_dir dir)
-+{
-+ struct dst_entry *old;
-+
-+ pr_debug("Invalidate iif %d for dir %d on cache %p\n",
-+ rtc->cached_dst[dir].iif, dir, rtc);
-+
-+ old = xchg(&rtc->cached_dst[dir].dst, NULL);
-+ dst_release(old);
-+ rtc->cached_dst[dir].iif = -1;
-+}
-+
-+static unsigned int nf_rtcache_in(const struct nf_hook_ops *ops,
-+ struct sk_buff *skb,
-+ const struct net_device *in,
-+ const struct net_device *out,
-+ int (*okfn)(struct sk_buff *))
-+{
-+ struct nf_conn_rtcache *rtc;
-+ enum ip_conntrack_info ctinfo;
-+ enum ip_conntrack_dir dir;
-+ struct dst_entry *dst;
-+ struct nf_conn *ct;
-+ int iif;
-+ u32 cookie;
-+
-+ if (skb_dst(skb) || skb->sk)
-+ return NF_ACCEPT;
-+
-+ ct = nf_ct_get(skb, &ctinfo);
-+ if (!ct)
-+ return NF_ACCEPT;
-+
-+ rtc = nf_ct_rtcache_find_usable(ct);
-+ if (!rtc)
-+ return NF_ACCEPT;
-+
-+ /* if iif changes, don't use cache and let ip stack
-+ * do route lookup.
-+ *
-+ * If rp_filter is enabled it might toss skb, so
-+ * we don't want to avoid these checks.
-+ */
-+ dir = CTINFO2DIR(ctinfo);
-+ iif = nf_conn_rtcache_iif_get(rtc, dir);
-+ if (in->ifindex != iif) {
-+ pr_debug("ct %p, iif %d, cached iif %d, skip cached entry\n",
-+ ct, iif, in->ifindex);
-+ return NF_ACCEPT;
-+ }
-+ dst = nf_conn_rtcache_dst_get(rtc, dir);
-+ if (dst == NULL)
-+ return NF_ACCEPT;
-+
-+ cookie = nf_rtcache_get_cookie(ops->pf, dst);
-+
-+ dst = dst_check(dst, cookie);
-+ pr_debug("obtained dst %p for skb %p, cookie %d\n", dst, skb, cookie);
-+ if (likely(dst))
-+ skb_dst_set_noref_force(skb, dst);
-+ else
-+ nf_conn_rtcache_dst_obsolete(rtc, dir);
-+
-+ return NF_ACCEPT;
-+}
-+
-+static unsigned int nf_rtcache_forward(const struct nf_hook_ops *ops,
-+ struct sk_buff *skb,
-+ const struct net_device *in,
-+ const struct net_device *out,
-+ int (*okfn)(struct sk_buff *))
-+{
-+ struct nf_conn_rtcache *rtc;
-+ enum ip_conntrack_info ctinfo;
-+ enum ip_conntrack_dir dir;
-+ struct nf_conn *ct;
-+ struct dst_entry *dst = skb_dst(skb);
-+ int iif;
-+
-+ ct = nf_ct_get(skb, &ctinfo);
-+ if (!ct)
-+ return NF_ACCEPT;
-+
-+ if (dst && dst_xfrm(dst))
-+ return NF_ACCEPT;
-+
-+ if (!nf_ct_is_confirmed(ct)) {
-+ if (WARN_ON(nf_ct_rtcache_find(ct)))
-+ return NF_ACCEPT;
-+ nf_ct_rtcache_ext_add(ct);
-+ return NF_ACCEPT;
-+ }
-+
-+ rtc = nf_ct_rtcache_find_usable(ct);
-+ if (!rtc)
-+ return NF_ACCEPT;
-+
-+ dir = CTINFO2DIR(ctinfo);
-+ iif = nf_conn_rtcache_iif_get(rtc, dir);
-+ pr_debug("ct %p, skb %p, dir %d, iif %d, cached iif %d\n",
-+ ct, skb, dir, iif, in->ifindex);
-+ if (likely(in->ifindex == iif))
-+ return NF_ACCEPT;
-+
-+ nf_conn_rtcache_dst_set(ops->pf, rtc, skb_dst(skb), dir, in->ifindex);
-+ return NF_ACCEPT;
-+}
-+
-+static int nf_rtcache_dst_remove(struct nf_conn *ct, void *data)
-+{
-+ struct nf_conn_rtcache *rtc = nf_ct_rtcache_find(ct);
-+ struct net_device *dev = data;
-+
-+ if (!rtc)
-+ return 0;
-+
-+ if (dev->ifindex == rtc->cached_dst[IP_CT_DIR_ORIGINAL].iif ||
-+ dev->ifindex == rtc->cached_dst[IP_CT_DIR_REPLY].iif) {
-+ nf_conn_rtcache_dst_obsolete(rtc, IP_CT_DIR_ORIGINAL);
-+ nf_conn_rtcache_dst_obsolete(rtc, IP_CT_DIR_REPLY);
-+ }
-+
-+ return 0;
-+}
-+
-+static int nf_rtcache_netdev_event(struct notifier_block *this,
-+ unsigned long event, void *ptr)
-+{
-+ struct net_device *dev = netdev_notifier_info_to_dev(ptr);
-+ struct net *net = dev_net(dev);
-+
-+ if (event == NETDEV_DOWN)
-+ nf_ct_iterate_cleanup(net, nf_rtcache_dst_remove, dev, 0, 0);
-+
-+ return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block nf_rtcache_notifier = {
-+ .notifier_call = nf_rtcache_netdev_event,
-+};
-+
-+static struct nf_hook_ops rtcache_ops[] = {
-+ {
-+ .hook = nf_rtcache_in,
-+ .owner = THIS_MODULE,
-+ .pf = NFPROTO_IPV4,
-+ .hooknum = NF_INET_PRE_ROUTING,
-+ .priority = NF_IP_PRI_LAST,
-+ },
-+ {
-+ .hook = nf_rtcache_forward,
-+ .owner = THIS_MODULE,
-+ .pf = NFPROTO_IPV4,
-+ .hooknum = NF_INET_FORWARD,
-+ .priority = NF_IP_PRI_LAST,
-+ },
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
-+ {
-+ .hook = nf_rtcache_in,
-+ .owner = THIS_MODULE,
-+ .pf = NFPROTO_IPV6,
-+ .hooknum = NF_INET_PRE_ROUTING,
-+ .priority = NF_IP_PRI_LAST,
-+ },
-+ {
-+ .hook = nf_rtcache_forward,
-+ .owner = THIS_MODULE,
-+ .pf = NFPROTO_IPV6,
-+ .hooknum = NF_INET_FORWARD,
-+ .priority = NF_IP_PRI_LAST,
-+ },
-+#endif
-+};
-+
-+static struct nf_ct_ext_type rtcache_extend __read_mostly = {
-+ .len = sizeof(struct nf_conn_rtcache),
-+ .align = __alignof__(struct nf_conn_rtcache),
-+ .id = NF_CT_EXT_RTCACHE,
-+ .destroy = nf_conn_rtcache_destroy,
-+};
-+
-+static int __init nf_conntrack_rtcache_init(void)
-+{
-+ int ret = nf_ct_extend_register(&rtcache_extend);
-+
-+ if (ret < 0) {
-+ pr_err("nf_conntrack_rtcache: Unable to register extension\n");
-+ return ret;
-+ }
-+
-+ ret = nf_register_hooks(rtcache_ops, ARRAY_SIZE(rtcache_ops));
-+ if (ret < 0) {
-+ nf_ct_extend_unregister(&rtcache_extend);
-+ return ret;
-+ }
-+
-+ ret = register_netdevice_notifier(&nf_rtcache_notifier);
-+ if (ret) {
-+ nf_unregister_hooks(rtcache_ops, ARRAY_SIZE(rtcache_ops));
-+ nf_ct_extend_unregister(&rtcache_extend);
-+ }
-+
-+ return ret;
-+}
-+
-+static int nf_rtcache_ext_remove(struct nf_conn *ct, void *data)
-+{
-+ struct nf_conn_rtcache *rtc = nf_ct_rtcache_find(ct);
-+
-+ return rtc != NULL;
-+}
-+
-+static bool __exit nf_conntrack_rtcache_wait_for_dying(struct net *net)
-+{
-+ bool wait = false;
-+ int cpu;
-+
-+ for_each_possible_cpu(cpu) {
-+ struct nf_conntrack_tuple_hash *h;
-+ struct hlist_nulls_node *n;
-+ struct nf_conn *ct;
-+ struct ct_pcpu *pcpu = per_cpu_ptr(net->ct.pcpu_lists, cpu);
-+
-+ rcu_read_lock();
-+ spin_lock_bh(&pcpu->lock);
-+
-+ hlist_nulls_for_each_entry(h, n, &pcpu->dying, hnnode) {
-+ ct = nf_ct_tuplehash_to_ctrack(h);
-+ if (nf_ct_rtcache_find(ct) != NULL) {
-+ wait = true;
-+ break;
-+ }
-+ }
-+ spin_unlock_bh(&pcpu->lock);
-+ rcu_read_unlock();
-+ }
-+
-+ return wait;
-+}
-+
-+static void __exit nf_conntrack_rtcache_fini(void)
-+{
-+ struct net *net;
-+ int count = 0;
-+
-+ /* remove hooks so no new connections get rtcache extension */
-+ nf_unregister_hooks(rtcache_ops, ARRAY_SIZE(rtcache_ops));
-+
-+ synchronize_net();
-+
-+ unregister_netdevice_notifier(&nf_rtcache_notifier);
-+
-+ rtnl_lock();
-+
-+ /* zap all conntracks with rtcache extension */
-+ for_each_net(net)
-+ nf_ct_iterate_cleanup(net, nf_rtcache_ext_remove, NULL, 0, 0);
-+
-+ for_each_net(net) {
-+ /* .. and make sure they're gone from dying list, too */
-+ while (nf_conntrack_rtcache_wait_for_dying(net)) {
-+ msleep(200);
-+ WARN_ONCE(++count > 25, "Waiting for all rtcache conntracks to go away\n");
-+ }
-+ }
-+
-+ rtnl_unlock();
-+ synchronize_net();
-+ nf_ct_extend_unregister(&rtcache_extend);
-+}
-+module_init(nf_conntrack_rtcache_init);
-+module_exit(nf_conntrack_rtcache_fini);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Florian Westphal <fw@strlen.de>");
-+MODULE_DESCRIPTION("Conntrack route cache extension");
+++ /dev/null
-From 6ae4ae8e512bd229f806c22f8a2cd751e4f987c2 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Linus=20L=C3=BCssing?= <linus.luessing@c0d3.blue>
-Date: Sat, 23 May 2015 03:12:34 +0200
-Subject: [PATCH] bridge: allow setting hash_max + multicast_router if
- interface is down
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Network managers like netifd (used in OpenWRT for instance) try to
-configure interface options after creation but before setting the
-interface up.
-
-Unfortunately the sysfs / bridge currently only allows to configure the
-hash_max and multicast_router options when the bridge interface is up.
-But since br_multicast_init() doesn't start any timers and only sets
-default values and initializes timers it should be save to reconfigure
-the default values after that, before things actually get active after
-the bridge is set up.
-
-Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- net/bridge/br_multicast.c | 24 +++---------------------
- 1 file changed, 3 insertions(+), 21 deletions(-)
-
---- a/net/bridge/br_multicast.c
-+++ b/net/bridge/br_multicast.c
-@@ -1948,11 +1948,9 @@ out:
-
- int br_multicast_set_router(struct net_bridge *br, unsigned long val)
- {
-- int err = -ENOENT;
-+ int err = -EINVAL;
-
- spin_lock_bh(&br->multicast_lock);
-- if (!netif_running(br->dev))
-- goto unlock;
-
- switch (val) {
- case 0:
-@@ -1963,13 +1961,8 @@ int br_multicast_set_router(struct net_b
- br->multicast_router = val;
- err = 0;
- break;
--
-- default:
-- err = -EINVAL;
-- break;
- }
-
--unlock:
- spin_unlock_bh(&br->multicast_lock);
-
- return err;
-@@ -1978,11 +1971,9 @@ unlock:
- int br_multicast_set_port_router(struct net_bridge_port *p, unsigned long val)
- {
- struct net_bridge *br = p->br;
-- int err = -ENOENT;
-+ int err = -EINVAL;
-
- spin_lock(&br->multicast_lock);
-- if (!netif_running(br->dev) || p->state == BR_STATE_DISABLED)
-- goto unlock;
-
- switch (val) {
- case 0:
-@@ -2004,13 +1995,8 @@ int br_multicast_set_port_router(struct
-
- br_multicast_add_router(br, p);
- break;
--
-- default:
-- err = -EINVAL;
-- break;
- }
-
--unlock:
- spin_unlock(&br->multicast_lock);
-
- return err;
-@@ -2115,15 +2101,11 @@ unlock:
-
- int br_multicast_set_hash_max(struct net_bridge *br, unsigned long val)
- {
-- int err = -ENOENT;
-+ int err = -EINVAL;
- u32 old;
- struct net_bridge_mdb_htable *mdb;
-
- spin_lock_bh(&br->multicast_lock);
-- if (!netif_running(br->dev))
-- goto unlock;
--
-- err = -EINVAL;
- if (!is_power_of_2(val))
- goto unlock;
-
+++ /dev/null
---- a/arch/mips/boot/compressed/string.c
-+++ b/arch/mips/boot/compressed/string.c
-@@ -26,3 +26,19 @@ void *memset(void *s, int c, size_t n)
- ss[i] = c;
- return s;
- }
-+
-+void *memmove(void *__dest, __const void *__src, size_t count)
-+{
-+ unsigned char *d = __dest;
-+ const unsigned char *s = __src;
-+
-+ if (__dest == __src)
-+ return __dest;
-+
-+ if (__dest < __src)
-+ return memcpy(__dest, __src, count);
-+
-+ while (count--)
-+ d[count] = s[count];
-+ return __dest;
-+}
+++ /dev/null
-From 6216642f200258708e47170ff14ba8ecb486f4f0 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 18 Jan 2015 19:49:58 +0100
-Subject: [PATCH] bgmac: register napi before the device
-
-napi should get registered before the netdev and not after.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bgmac.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -1521,6 +1521,8 @@ static int bgmac_probe(struct bcma_devic
- if (core->bus->sprom.boardflags_lo & BGMAC_BFL_ENETADM)
- bgmac_warn(bgmac, "Support for ADMtek ethernet switch not implemented\n");
-
-+ netif_napi_add(net_dev, &bgmac->napi, bgmac_poll, BGMAC_WEIGHT);
-+
- err = bgmac_mii_register(bgmac);
- if (err) {
- bgmac_err(bgmac, "Cannot register MDIO\n");
-@@ -1535,8 +1537,6 @@ static int bgmac_probe(struct bcma_devic
-
- netif_carrier_off(net_dev);
-
-- netif_napi_add(net_dev, &bgmac->napi, bgmac_poll, BGMAC_WEIGHT);
--
- return 0;
-
- err_mii_unregister:
-@@ -1555,9 +1555,9 @@ static void bgmac_remove(struct bcma_dev
- {
- struct bgmac *bgmac = bcma_get_drvdata(core);
-
-- netif_napi_del(&bgmac->napi);
- unregister_netdev(bgmac->net_dev);
- bgmac_mii_unregister(bgmac);
-+ netif_napi_del(&bgmac->napi);
- bgmac_dma_free(bgmac);
- bcma_set_drvdata(core, NULL);
- free_netdev(bgmac->net_dev);
+++ /dev/null
-From 43f159c60a99318b1ef7d1d7c16c4dfdd06bfd90 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 18 Jan 2015 19:49:59 +0100
-Subject: [PATCH] bgmac: activate irqs only if there is nothing to poll
-
-IRQs should only get activated when there is nothing to poll in the
-queue any more and to after every poll.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bgmac.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -1167,10 +1167,10 @@ static int bgmac_poll(struct napi_struct
- bgmac->int_status = 0;
- }
-
-- if (handled < weight)
-+ if (handled < weight) {
- napi_complete(napi);
--
-- bgmac_chip_intrs_on(bgmac);
-+ bgmac_chip_intrs_on(bgmac);
-+ }
-
- return handled;
- }
+++ /dev/null
-From 8edfe3b6fad28da191c8fa15e4e0d8f7335a0091 Mon Sep 17 00:00:00 2001
-From: Peter Senna Tschudin <peter.senna@gmail.com>
-Date: Sat, 7 Mar 2015 12:10:26 +0100
-Subject: [PATCH] bgmac: Clean warning messages
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-On my test environment the throughput of a file transfer drops
-from 4.4MBps to 116KBps due the number of repeated warning
-messages. This patch removes the warning messages as DMA works
-correctly with addresses using 0xC0000000 bits.
-
-Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
-Acked-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bgmac.c | 7 -------
- 1 file changed, 7 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -302,9 +302,6 @@ static int bgmac_dma_rx_skb_for_slot(str
- slot->skb = skb;
- slot->dma_addr = dma_addr;
-
-- if (slot->dma_addr & 0xC0000000)
-- bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n");
--
- return 0;
- }
-
-@@ -505,8 +502,6 @@ static int bgmac_dma_alloc(struct bgmac
- ring->mmio_base);
- goto err_dma_free;
- }
-- if (ring->dma_base & 0xC0000000)
-- bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n");
-
- ring->unaligned = bgmac_dma_unaligned(bgmac, ring,
- BGMAC_DMA_RING_TX);
-@@ -536,8 +531,6 @@ static int bgmac_dma_alloc(struct bgmac
- err = -ENOMEM;
- goto err_dma_free;
- }
-- if (ring->dma_base & 0xC0000000)
-- bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n");
-
- ring->unaligned = bgmac_dma_unaligned(bgmac, ring,
- BGMAC_DMA_RING_RX);
+++ /dev/null
-From c25b23b8a387e7d31f7a74af8e37b61e9e6ebb21 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Fri, 20 Mar 2015 23:14:31 +0100
-Subject: [PATCH] bgmac: register fixed PHY for ARM BCM470X / BCM5301X chipsets
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-On ARM SoCs with bgmac Ethernet hardware we don't have any normal PHY.
-There is always a switch attached but it's not even controlled over MDIO
-like in case of MIPS devices.
-We need a fixed PHY to be able to send/receive packets from the switch.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/bgmac.c | 34 ++++++++++++++++++++++++++++++++++
- 1 file changed, 34 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -14,6 +14,7 @@
- #include <linux/etherdevice.h>
- #include <linux/mii.h>
- #include <linux/phy.h>
-+#include <linux/phy_fixed.h>
- #include <linux/interrupt.h>
- #include <linux/dma-mapping.h>
- #include <bcm47xx_nvram.h>
-@@ -1330,13 +1331,46 @@ static void bgmac_adjust_link(struct net
- }
- }
-
-+static int bgmac_fixed_phy_register(struct bgmac *bgmac)
-+{
-+ struct fixed_phy_status fphy_status = {
-+ .link = 1,
-+ .speed = SPEED_1000,
-+ .duplex = DUPLEX_FULL,
-+ };
-+ struct phy_device *phy_dev;
-+ int err;
-+
-+ phy_dev = fixed_phy_register(PHY_POLL, &fphy_status, NULL);
-+ if (!phy_dev || IS_ERR(phy_dev)) {
-+ bgmac_err(bgmac, "Failed to register fixed PHY device\n");
-+ return -ENODEV;
-+ }
-+
-+ err = phy_connect_direct(bgmac->net_dev, phy_dev, bgmac_adjust_link,
-+ PHY_INTERFACE_MODE_MII);
-+ if (err) {
-+ bgmac_err(bgmac, "Connecting PHY failed\n");
-+ return err;
-+ }
-+
-+ bgmac->phy_dev = phy_dev;
-+
-+ return err;
-+}
-+
- static int bgmac_mii_register(struct bgmac *bgmac)
- {
-+ struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo;
- struct mii_bus *mii_bus;
- struct phy_device *phy_dev;
- char bus_id[MII_BUS_ID_SIZE + 3];
- int i, err = 0;
-
-+ if (ci->id == BCMA_CHIP_ID_BCM4707 ||
-+ ci->id == BCMA_CHIP_ID_BCM53018)
-+ return bgmac_fixed_phy_register(bgmac);
-+
- mii_bus = mdiobus_alloc();
- if (!mii_bus)
- return -ENOMEM;
+++ /dev/null
-From fc300dc3733fdc328e6e10c7b8379b60c26cd648 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Fri, 20 Mar 2015 23:14:32 +0100
-Subject: [PATCH] bgmac: allow enabling on ARCH_BCM_5301X
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Home routers based on ARM SoCs like BCM4708 also have bcma bus with core
-supported by bgmac.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/broadcom/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/broadcom/Kconfig
-+++ b/drivers/net/ethernet/broadcom/Kconfig
-@@ -143,7 +143,7 @@ config BNX2X_SRIOV
-
- config BGMAC
- tristate "BCMA bus GBit core support"
-- depends on BCMA_HOST_SOC && HAS_DMA && BCM47XX
-+ depends on BCMA_HOST_SOC && HAS_DMA && (BCM47XX || ARCH_BCM_5301X)
- select PHYLIB
- ---help---
- This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
+++ /dev/null
-From 37e9a6904520b525b542ecd67201164d06fdb95a Mon Sep 17 00:00:00 2001
-From: Mark Salter <msalter@redhat.com>
-Date: Thu, 11 Dec 2014 23:03:26 -0500
-Subject: [PATCH] net: phy: export fixed_phy_register()
-
-When building the bcmgenet driver as module, I get:
-
-ERROR: "fixed_phy_register" [drivers/net/ethernet/broadcom/genet/genet.ko] undefined!
-
-commit b0ba512e225d72 ("net: bcmgenet: enable driver to work without device
-tree") which added a call to fixed_phy_register. But fixed_phy_register
-needs to be exported if used from a module.
-
-Signed-off-by: Mark Salter <msalter@redhat.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/fixed.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/phy/fixed.c
-+++ b/drivers/net/phy/fixed.c
-@@ -274,6 +274,7 @@ struct phy_device *fixed_phy_register(un
-
- return phy;
- }
-+EXPORT_SYMBOL_GPL(fixed_phy_register);
-
- static int __init fixed_mdio_bus_init(void)
- {
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 23 Mar 2015 02:40:06 +0100
-Subject: [PATCH] bgmac: fix descriptor frame start/end definitions
-
-The start-of-frame and end-of-frame bits were accidentally swapped.
-In the current code it does not make any difference, since they are
-always used together.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/broadcom/bgmac.h
-+++ b/drivers/net/ethernet/broadcom/bgmac.h
-@@ -345,8 +345,8 @@
-
- #define BGMAC_DESC_CTL0_EOT 0x10000000 /* End of ring */
- #define BGMAC_DESC_CTL0_IOC 0x20000000 /* IRQ on complete */
--#define BGMAC_DESC_CTL0_SOF 0x40000000 /* Start of frame */
--#define BGMAC_DESC_CTL0_EOF 0x80000000 /* End of frame */
-+#define BGMAC_DESC_CTL0_EOF 0x40000000 /* End of frame */
-+#define BGMAC_DESC_CTL0_SOF 0x80000000 /* Start of frame */
- #define BGMAC_DESC_CTL1_LEN 0x00001FFF
-
- #define BGMAC_PHY_NOREGS 0x1E
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 23 Mar 2015 02:41:25 +0100
-Subject: [PATCH] bgmac: implement GRO and use build_skb
-
-This improves performance for routing and local rx
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -276,31 +276,31 @@ static int bgmac_dma_rx_skb_for_slot(str
- struct bgmac_slot_info *slot)
- {
- struct device *dma_dev = bgmac->core->dma_dev;
-- struct sk_buff *skb;
- dma_addr_t dma_addr;
- struct bgmac_rx_header *rx;
-+ void *buf;
-
- /* Alloc skb */
-- skb = netdev_alloc_skb(bgmac->net_dev, BGMAC_RX_BUF_SIZE);
-- if (!skb)
-+ buf = netdev_alloc_frag(BGMAC_RX_ALLOC_SIZE);
-+ if (!buf)
- return -ENOMEM;
-
- /* Poison - if everything goes fine, hardware will overwrite it */
-- rx = (struct bgmac_rx_header *)skb->data;
-+ rx = buf;
- rx->len = cpu_to_le16(0xdead);
- rx->flags = cpu_to_le16(0xbeef);
-
- /* Map skb for the DMA */
-- dma_addr = dma_map_single(dma_dev, skb->data,
-- BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
-+ dma_addr = dma_map_single(dma_dev, buf, BGMAC_RX_BUF_SIZE,
-+ DMA_FROM_DEVICE);
- if (dma_mapping_error(dma_dev, dma_addr)) {
- bgmac_err(bgmac, "DMA mapping error\n");
-- dev_kfree_skb(skb);
-+ put_page(virt_to_head_page(buf));
- return -ENOMEM;
- }
-
- /* Update the slot */
-- slot->skb = skb;
-+ slot->buf = buf;
- slot->dma_addr = dma_addr;
-
- return 0;
-@@ -343,8 +343,9 @@ static int bgmac_dma_rx_read(struct bgma
- while (ring->start != ring->end) {
- struct device *dma_dev = bgmac->core->dma_dev;
- struct bgmac_slot_info *slot = &ring->slots[ring->start];
-- struct sk_buff *skb = slot->skb;
-- struct bgmac_rx_header *rx;
-+ struct bgmac_rx_header *rx = slot->buf;
-+ struct sk_buff *skb;
-+ void *buf = slot->buf;
- u16 len, flags;
-
- /* Unmap buffer to make it accessible to the CPU */
-@@ -352,7 +353,6 @@ static int bgmac_dma_rx_read(struct bgma
- BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
-
- /* Get info from the header */
-- rx = (struct bgmac_rx_header *)skb->data;
- len = le16_to_cpu(rx->len);
- flags = le16_to_cpu(rx->flags);
-
-@@ -393,12 +393,13 @@ static int bgmac_dma_rx_read(struct bgma
- dma_unmap_single(dma_dev, old_dma_addr,
- BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
-
-+ skb = build_skb(buf, BGMAC_RX_ALLOC_SIZE);
- skb_put(skb, BGMAC_RX_FRAME_OFFSET + len);
- skb_pull(skb, BGMAC_RX_FRAME_OFFSET);
-
- skb_checksum_none_assert(skb);
- skb->protocol = eth_type_trans(skb, bgmac->net_dev);
-- netif_receive_skb(skb);
-+ napi_gro_receive(&bgmac->napi, skb);
- handled++;
- } while (0);
-
-@@ -434,12 +435,11 @@ static bool bgmac_dma_unaligned(struct b
- return false;
- }
-
--static void bgmac_dma_ring_free(struct bgmac *bgmac,
-- struct bgmac_dma_ring *ring)
-+static void bgmac_dma_tx_ring_free(struct bgmac *bgmac,
-+ struct bgmac_dma_ring *ring)
- {
- struct device *dma_dev = bgmac->core->dma_dev;
- struct bgmac_slot_info *slot;
-- int size;
- int i;
-
- for (i = 0; i < ring->num_slots; i++) {
-@@ -451,23 +451,55 @@ static void bgmac_dma_ring_free(struct b
- dev_kfree_skb(slot->skb);
- }
- }
-+}
-+
-+static void bgmac_dma_rx_ring_free(struct bgmac *bgmac,
-+ struct bgmac_dma_ring *ring)
-+{
-+ struct device *dma_dev = bgmac->core->dma_dev;
-+ struct bgmac_slot_info *slot;
-+ int i;
-+
-+ for (i = 0; i < ring->num_slots; i++) {
-+ slot = &ring->slots[i];
-+ if (!slot->buf)
-+ continue;
-
-- if (ring->cpu_base) {
-- /* Free ring of descriptors */
-- size = ring->num_slots * sizeof(struct bgmac_dma_desc);
-- dma_free_coherent(dma_dev, size, ring->cpu_base,
-- ring->dma_base);
-+ if (slot->dma_addr)
-+ dma_unmap_single(dma_dev, slot->dma_addr,
-+ BGMAC_RX_BUF_SIZE,
-+ DMA_FROM_DEVICE);
-+ put_page(virt_to_head_page(slot->buf));
- }
- }
-
-+static void bgmac_dma_ring_desc_free(struct bgmac *bgmac,
-+ struct bgmac_dma_ring *ring)
-+{
-+ struct device *dma_dev = bgmac->core->dma_dev;
-+ int size;
-+
-+ if (!ring->cpu_base)
-+ return;
-+
-+ /* Free ring of descriptors */
-+ size = ring->num_slots * sizeof(struct bgmac_dma_desc);
-+ dma_free_coherent(dma_dev, size, ring->cpu_base,
-+ ring->dma_base);
-+}
-+
- static void bgmac_dma_free(struct bgmac *bgmac)
- {
- int i;
-
-- for (i = 0; i < BGMAC_MAX_TX_RINGS; i++)
-- bgmac_dma_ring_free(bgmac, &bgmac->tx_ring[i]);
-- for (i = 0; i < BGMAC_MAX_RX_RINGS; i++)
-- bgmac_dma_ring_free(bgmac, &bgmac->rx_ring[i]);
-+ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) {
-+ bgmac_dma_tx_ring_free(bgmac, &bgmac->tx_ring[i]);
-+ bgmac_dma_ring_desc_free(bgmac, &bgmac->tx_ring[i]);
-+ }
-+ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
-+ bgmac_dma_rx_ring_free(bgmac, &bgmac->rx_ring[i]);
-+ bgmac_dma_ring_desc_free(bgmac, &bgmac->rx_ring[i]);
-+ }
- }
-
- static int bgmac_dma_alloc(struct bgmac *bgmac)
---- a/drivers/net/ethernet/broadcom/bgmac.h
-+++ b/drivers/net/ethernet/broadcom/bgmac.h
-@@ -362,6 +362,8 @@
- #define BGMAC_RX_FRAME_OFFSET 30 /* There are 2 unused bytes between header and real data */
- #define BGMAC_RX_MAX_FRAME_SIZE 1536 /* Copied from b44/tg3 */
- #define BGMAC_RX_BUF_SIZE (BGMAC_RX_FRAME_OFFSET + BGMAC_RX_MAX_FRAME_SIZE)
-+#define BGMAC_RX_ALLOC_SIZE (SKB_DATA_ALIGN(BGMAC_RX_BUF_SIZE) + \
-+ SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))
-
- #define BGMAC_BFL_ENETROBO 0x0010 /* has ephy roboswitch spi */
- #define BGMAC_BFL_ENETADM 0x0080 /* has ADMtek switch */
-@@ -383,7 +385,10 @@
- #define ETHER_MAX_LEN 1518
-
- struct bgmac_slot_info {
-- struct sk_buff *skb;
-+ union {
-+ struct sk_buff *skb;
-+ void *buf;
-+ };
- dma_addr_t dma_addr;
- };
-
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 23 Mar 2015 02:42:26 +0100
-Subject: [PATCH] bgmac: implement scatter/gather support
-
-Always use software checksumming, since the hardware does not have any
-checksum offload support.
-This significantly improves local TCP tx performance.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -115,53 +115,91 @@ static void bgmac_dma_tx_enable(struct b
- bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, ctl);
- }
-
-+static void
-+bgmac_dma_tx_add_buf(struct bgmac *bgmac, struct bgmac_dma_ring *ring,
-+ int i, int len, u32 ctl0)
-+{
-+ struct bgmac_slot_info *slot;
-+ struct bgmac_dma_desc *dma_desc;
-+ u32 ctl1;
-+
-+ if (i == ring->num_slots - 1)
-+ ctl0 |= BGMAC_DESC_CTL0_EOT;
-+
-+ ctl1 = len & BGMAC_DESC_CTL1_LEN;
-+
-+ slot = &ring->slots[i];
-+ dma_desc = &ring->cpu_base[i];
-+ dma_desc->addr_low = cpu_to_le32(lower_32_bits(slot->dma_addr));
-+ dma_desc->addr_high = cpu_to_le32(upper_32_bits(slot->dma_addr));
-+ dma_desc->ctl0 = cpu_to_le32(ctl0);
-+ dma_desc->ctl1 = cpu_to_le32(ctl1);
-+}
-+
- static netdev_tx_t bgmac_dma_tx_add(struct bgmac *bgmac,
- struct bgmac_dma_ring *ring,
- struct sk_buff *skb)
- {
- struct device *dma_dev = bgmac->core->dma_dev;
- struct net_device *net_dev = bgmac->net_dev;
-- struct bgmac_dma_desc *dma_desc;
-- struct bgmac_slot_info *slot;
-- u32 ctl0, ctl1;
-+ struct bgmac_slot_info *slot = &ring->slots[ring->end];
- int free_slots;
-+ int nr_frags;
-+ u32 flags;
-+ int index = ring->end;
-+ int i;
-
- if (skb->len > BGMAC_DESC_CTL1_LEN) {
- bgmac_err(bgmac, "Too long skb (%d)\n", skb->len);
-- goto err_stop_drop;
-+ goto err_drop;
- }
-
-+ if (skb->ip_summed == CHECKSUM_PARTIAL)
-+ skb_checksum_help(skb);
-+
-+ nr_frags = skb_shinfo(skb)->nr_frags;
-+
- if (ring->start <= ring->end)
- free_slots = ring->start - ring->end + BGMAC_TX_RING_SLOTS;
- else
- free_slots = ring->start - ring->end;
-- if (free_slots == 1) {
-+
-+ if (free_slots <= nr_frags + 1) {
- bgmac_err(bgmac, "TX ring is full, queue should be stopped!\n");
- netif_stop_queue(net_dev);
- return NETDEV_TX_BUSY;
- }
-
-- slot = &ring->slots[ring->end];
-- slot->skb = skb;
-- slot->dma_addr = dma_map_single(dma_dev, skb->data, skb->len,
-+ slot->dma_addr = dma_map_single(dma_dev, skb->data, skb_headlen(skb),
- DMA_TO_DEVICE);
-- if (dma_mapping_error(dma_dev, slot->dma_addr)) {
-- bgmac_err(bgmac, "Mapping error of skb on ring 0x%X\n",
-- ring->mmio_base);
-- goto err_stop_drop;
-- }
-+ if (unlikely(dma_mapping_error(dma_dev, slot->dma_addr)))
-+ goto err_dma_head;
-
-- ctl0 = BGMAC_DESC_CTL0_IOC | BGMAC_DESC_CTL0_SOF | BGMAC_DESC_CTL0_EOF;
-- if (ring->end == ring->num_slots - 1)
-- ctl0 |= BGMAC_DESC_CTL0_EOT;
-- ctl1 = skb->len & BGMAC_DESC_CTL1_LEN;
-+ flags = BGMAC_DESC_CTL0_SOF;
-+ if (!nr_frags)
-+ flags |= BGMAC_DESC_CTL0_EOF | BGMAC_DESC_CTL0_IOC;
-+
-+ bgmac_dma_tx_add_buf(bgmac, ring, index, skb_headlen(skb), flags);
-+ flags = 0;
-+
-+ for (i = 0; i < nr_frags; i++) {
-+ struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
-+ int len = skb_frag_size(frag);
-+
-+ index = (index + 1) % BGMAC_TX_RING_SLOTS;
-+ slot = &ring->slots[index];
-+ slot->dma_addr = skb_frag_dma_map(dma_dev, frag, 0,
-+ len, DMA_TO_DEVICE);
-+ if (unlikely(dma_mapping_error(dma_dev, slot->dma_addr)))
-+ goto err_dma;
-
-- dma_desc = ring->cpu_base;
-- dma_desc += ring->end;
-- dma_desc->addr_low = cpu_to_le32(lower_32_bits(slot->dma_addr));
-- dma_desc->addr_high = cpu_to_le32(upper_32_bits(slot->dma_addr));
-- dma_desc->ctl0 = cpu_to_le32(ctl0);
-- dma_desc->ctl1 = cpu_to_le32(ctl1);
-+ if (i == nr_frags - 1)
-+ flags |= BGMAC_DESC_CTL0_EOF | BGMAC_DESC_CTL0_IOC;
-+
-+ bgmac_dma_tx_add_buf(bgmac, ring, index, len, flags);
-+ }
-+
-+ slot->skb = skb;
-
- netdev_sent_queue(net_dev, skb->len);
-
-@@ -170,20 +208,35 @@ static netdev_tx_t bgmac_dma_tx_add(stru
- /* Increase ring->end to point empty slot. We tell hardware the first
- * slot it should *not* read.
- */
-- if (++ring->end >= BGMAC_TX_RING_SLOTS)
-- ring->end = 0;
-+ ring->end = (index + 1) % BGMAC_TX_RING_SLOTS;
- bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_INDEX,
- ring->index_base +
- ring->end * sizeof(struct bgmac_dma_desc));
-
-- /* Always keep one slot free to allow detecting bugged calls. */
-- if (--free_slots == 1)
-+ free_slots -= nr_frags + 1;
-+ if (free_slots < 8)
- netif_stop_queue(net_dev);
-
- return NETDEV_TX_OK;
-
--err_stop_drop:
-- netif_stop_queue(net_dev);
-+err_dma:
-+ dma_unmap_single(dma_dev, slot->dma_addr, skb_headlen(skb),
-+ DMA_TO_DEVICE);
-+
-+ while (i > 0) {
-+ int index = (ring->end + i) % BGMAC_TX_RING_SLOTS;
-+ struct bgmac_slot_info *slot = &ring->slots[index];
-+ u32 ctl1 = le32_to_cpu(ring->cpu_base[index].ctl1);
-+ int len = ctl1 & BGMAC_DESC_CTL1_LEN;
-+
-+ dma_unmap_page(dma_dev, slot->dma_addr, len, DMA_TO_DEVICE);
-+ }
-+
-+err_dma_head:
-+ bgmac_err(bgmac, "Mapping error of skb on ring 0x%X\n",
-+ ring->mmio_base);
-+
-+err_drop:
- dev_kfree_skb(skb);
- return NETDEV_TX_OK;
- }
-@@ -205,32 +258,45 @@ static void bgmac_dma_tx_free(struct bgm
-
- while (ring->start != empty_slot) {
- struct bgmac_slot_info *slot = &ring->slots[ring->start];
-+ u32 ctl1 = le32_to_cpu(ring->cpu_base[ring->start].ctl1);
-+ int len = ctl1 & BGMAC_DESC_CTL1_LEN;
-
-- if (slot->skb) {
-+ if (!slot->dma_addr) {
-+ bgmac_err(bgmac, "Hardware reported transmission for empty TX ring slot %d! End of ring: %d\n",
-+ ring->start, ring->end);
-+ goto next;
-+ }
-+
-+ if (ctl1 & BGMAC_DESC_CTL0_SOF)
- /* Unmap no longer used buffer */
-- dma_unmap_single(dma_dev, slot->dma_addr,
-- slot->skb->len, DMA_TO_DEVICE);
-- slot->dma_addr = 0;
-+ dma_unmap_single(dma_dev, slot->dma_addr, len,
-+ DMA_TO_DEVICE);
-+ else
-+ dma_unmap_page(dma_dev, slot->dma_addr, len,
-+ DMA_TO_DEVICE);
-
-+ if (slot->skb) {
- bytes_compl += slot->skb->len;
- pkts_compl++;
-
- /* Free memory! :) */
- dev_kfree_skb(slot->skb);
- slot->skb = NULL;
-- } else {
-- bgmac_err(bgmac, "Hardware reported transmission for empty TX ring slot %d! End of ring: %d\n",
-- ring->start, ring->end);
- }
-
-+next:
-+ slot->dma_addr = 0;
- if (++ring->start >= BGMAC_TX_RING_SLOTS)
- ring->start = 0;
- freed = true;
- }
-
-+ if (!pkts_compl)
-+ return;
-+
- netdev_completed_queue(bgmac->net_dev, pkts_compl, bytes_compl);
-
-- if (freed && netif_queue_stopped(bgmac->net_dev))
-+ if (netif_queue_stopped(bgmac->net_dev))
- netif_wake_queue(bgmac->net_dev);
- }
-
-@@ -439,17 +505,25 @@ static void bgmac_dma_tx_ring_free(struc
- struct bgmac_dma_ring *ring)
- {
- struct device *dma_dev = bgmac->core->dma_dev;
-+ struct bgmac_dma_desc *dma_desc = ring->cpu_base;
- struct bgmac_slot_info *slot;
- int i;
-
- for (i = 0; i < ring->num_slots; i++) {
-+ int len = dma_desc[i].ctl1 & BGMAC_DESC_CTL1_LEN;
-+
- slot = &ring->slots[i];
-- if (slot->skb) {
-- if (slot->dma_addr)
-- dma_unmap_single(dma_dev, slot->dma_addr,
-- slot->skb->len, DMA_TO_DEVICE);
-- dev_kfree_skb(slot->skb);
-- }
-+ dev_kfree_skb(slot->skb);
-+
-+ if (!slot->dma_addr)
-+ continue;
-+
-+ if (slot->skb)
-+ dma_unmap_single(dma_dev, slot->dma_addr,
-+ len, DMA_TO_DEVICE);
-+ else
-+ dma_unmap_page(dma_dev, slot->dma_addr,
-+ len, DMA_TO_DEVICE);
- }
- }
-
-@@ -1588,6 +1662,10 @@ static int bgmac_probe(struct bcma_devic
- goto err_dma_free;
- }
-
-+ net_dev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
-+ net_dev->hw_features = net_dev->features;
-+ net_dev->vlan_features = net_dev->features;
-+
- err = register_netdev(bgmac->net_dev);
- if (err) {
- bgmac_err(bgmac, "Cannot register net device\n");
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 12 Apr 2015 09:58:56 +0200
-Subject: [PATCH] bgmac: simplify tx ring index handling
-
-Keep incrementing ring->start and ring->end instead of pointing it to
-the actual ring slot entry. This simplifies the calculation of the
-number of free slots.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -142,11 +142,10 @@ static netdev_tx_t bgmac_dma_tx_add(stru
- {
- struct device *dma_dev = bgmac->core->dma_dev;
- struct net_device *net_dev = bgmac->net_dev;
-- struct bgmac_slot_info *slot = &ring->slots[ring->end];
-- int free_slots;
-+ int index = ring->end % BGMAC_TX_RING_SLOTS;
-+ struct bgmac_slot_info *slot = &ring->slots[index];
- int nr_frags;
- u32 flags;
-- int index = ring->end;
- int i;
-
- if (skb->len > BGMAC_DESC_CTL1_LEN) {
-@@ -159,12 +158,10 @@ static netdev_tx_t bgmac_dma_tx_add(stru
-
- nr_frags = skb_shinfo(skb)->nr_frags;
-
-- if (ring->start <= ring->end)
-- free_slots = ring->start - ring->end + BGMAC_TX_RING_SLOTS;
-- else
-- free_slots = ring->start - ring->end;
--
-- if (free_slots <= nr_frags + 1) {
-+ /* ring->end - ring->start will return the number of valid slots,
-+ * even when ring->end overflows
-+ */
-+ if (ring->end - ring->start + nr_frags + 1 >= BGMAC_TX_RING_SLOTS) {
- bgmac_err(bgmac, "TX ring is full, queue should be stopped!\n");
- netif_stop_queue(net_dev);
- return NETDEV_TX_BUSY;
-@@ -200,7 +197,7 @@ static netdev_tx_t bgmac_dma_tx_add(stru
- }
-
- slot->skb = skb;
--
-+ ring->end += nr_frags + 1;
- netdev_sent_queue(net_dev, skb->len);
-
- wmb();
-@@ -208,13 +205,12 @@ static netdev_tx_t bgmac_dma_tx_add(stru
- /* Increase ring->end to point empty slot. We tell hardware the first
- * slot it should *not* read.
- */
-- ring->end = (index + 1) % BGMAC_TX_RING_SLOTS;
- bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_INDEX,
- ring->index_base +
-- ring->end * sizeof(struct bgmac_dma_desc));
-+ (ring->end % BGMAC_TX_RING_SLOTS) *
-+ sizeof(struct bgmac_dma_desc));
-
-- free_slots -= nr_frags + 1;
-- if (free_slots < 8)
-+ if (ring->end - ring->start >= BGMAC_TX_RING_SLOTS - 8)
- netif_stop_queue(net_dev);
-
- return NETDEV_TX_OK;
-@@ -256,17 +252,17 @@ static void bgmac_dma_tx_free(struct bgm
- empty_slot &= BGMAC_DMA_TX_STATDPTR;
- empty_slot /= sizeof(struct bgmac_dma_desc);
-
-- while (ring->start != empty_slot) {
-- struct bgmac_slot_info *slot = &ring->slots[ring->start];
-- u32 ctl1 = le32_to_cpu(ring->cpu_base[ring->start].ctl1);
-- int len = ctl1 & BGMAC_DESC_CTL1_LEN;
-+ while (ring->start != ring->end) {
-+ int slot_idx = ring->start % BGMAC_TX_RING_SLOTS;
-+ struct bgmac_slot_info *slot = &ring->slots[slot_idx];
-+ u32 ctl1;
-+ int len;
-
-- if (!slot->dma_addr) {
-- bgmac_err(bgmac, "Hardware reported transmission for empty TX ring slot %d! End of ring: %d\n",
-- ring->start, ring->end);
-- goto next;
-- }
-+ if (slot_idx == empty_slot)
-+ break;
-
-+ ctl1 = le32_to_cpu(ring->cpu_base[slot_idx].ctl1);
-+ len = ctl1 & BGMAC_DESC_CTL1_LEN;
- if (ctl1 & BGMAC_DESC_CTL0_SOF)
- /* Unmap no longer used buffer */
- dma_unmap_single(dma_dev, slot->dma_addr, len,
-@@ -284,10 +280,8 @@ static void bgmac_dma_tx_free(struct bgm
- slot->skb = NULL;
- }
-
--next:
- slot->dma_addr = 0;
-- if (++ring->start >= BGMAC_TX_RING_SLOTS)
-- ring->start = 0;
-+ ring->start++;
- freed = true;
- }
-
---- a/drivers/net/ethernet/broadcom/bgmac.h
-+++ b/drivers/net/ethernet/broadcom/bgmac.h
-@@ -414,10 +414,10 @@ enum bgmac_dma_ring_type {
- * empty.
- */
- struct bgmac_dma_ring {
-- u16 num_slots;
-- u16 start;
-- u16 end;
-+ u32 start;
-+ u32 end;
-
-+ u16 num_slots;
- u16 mmio_base;
- struct bgmac_dma_desc *cpu_base;
- dma_addr_t dma_base;
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 12 Apr 2015 10:08:04 +0200
-Subject: [PATCH] bgmac: leave interrupts disabled as long as there is work
- to do
-
-Always poll rx and tx during NAPI poll instead of relying on the status
-of the first interrupt. This prevents bgmac_poll from leaving unfinished
-work around until the next IRQ.
-In my tests this makes bridging/routing throughput under heavy load more
-stable and ensures that no new IRQs arrive as long as bgmac_poll uses up
-the entire budget.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -1109,8 +1109,6 @@ static void bgmac_chip_reset(struct bgma
- bgmac_phy_init(bgmac);
-
- netdev_reset_queue(bgmac->net_dev);
--
-- bgmac->int_status = 0;
- }
-
- static void bgmac_chip_intrs_on(struct bgmac *bgmac)
-@@ -1225,14 +1223,13 @@ static irqreturn_t bgmac_interrupt(int i
- if (!int_status)
- return IRQ_NONE;
-
-- /* Ack */
-- bgmac_write(bgmac, BGMAC_INT_STATUS, int_status);
-+ int_status &= ~(BGMAC_IS_TX0 | BGMAC_IS_RX);
-+ if (int_status)
-+ bgmac_err(bgmac, "Unknown IRQs: 0x%08X\n", int_status);
-
- /* Disable new interrupts until handling existing ones */
- bgmac_chip_intrs_off(bgmac);
-
-- bgmac->int_status = int_status;
--
- napi_schedule(&bgmac->napi);
-
- return IRQ_HANDLED;
-@@ -1241,25 +1238,17 @@ static irqreturn_t bgmac_interrupt(int i
- static int bgmac_poll(struct napi_struct *napi, int weight)
- {
- struct bgmac *bgmac = container_of(napi, struct bgmac, napi);
-- struct bgmac_dma_ring *ring;
- int handled = 0;
-
-- if (bgmac->int_status & BGMAC_IS_TX0) {
-- ring = &bgmac->tx_ring[0];
-- bgmac_dma_tx_free(bgmac, ring);
-- bgmac->int_status &= ~BGMAC_IS_TX0;
-- }
-+ /* Ack */
-+ bgmac_write(bgmac, BGMAC_INT_STATUS, ~0);
-
-- if (bgmac->int_status & BGMAC_IS_RX) {
-- ring = &bgmac->rx_ring[0];
-- handled += bgmac_dma_rx_read(bgmac, ring, weight);
-- bgmac->int_status &= ~BGMAC_IS_RX;
-- }
-+ bgmac_dma_tx_free(bgmac, &bgmac->tx_ring[0]);
-+ handled += bgmac_dma_rx_read(bgmac, &bgmac->rx_ring[0], weight);
-
-- if (bgmac->int_status) {
-- bgmac_err(bgmac, "Unknown IRQs: 0x%08X\n", bgmac->int_status);
-- bgmac->int_status = 0;
-- }
-+ /* Poll again if more events arrived in the meantime */
-+ if (bgmac_read(bgmac, BGMAC_INT_STATUS) & (BGMAC_IS_TX0 | BGMAC_IS_RX))
-+ return handled;
-
- if (handled < weight) {
- napi_complete(napi);
---- a/drivers/net/ethernet/broadcom/bgmac.h
-+++ b/drivers/net/ethernet/broadcom/bgmac.h
-@@ -452,7 +452,6 @@ struct bgmac {
-
- /* Int */
- u32 int_mask;
-- u32 int_status;
-
- /* Current MAC state */
- int mac_speed;
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 12 Apr 2015 10:13:28 +0200
-Subject: [PATCH] bgmac: set received skb headroom to NET_SKB_PAD
-
-A packet buffer offset of 30 bytes is inefficient, because the first 2
-bytes end up in a different cacheline.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -346,13 +346,13 @@ static int bgmac_dma_rx_skb_for_slot(str
- return -ENOMEM;
-
- /* Poison - if everything goes fine, hardware will overwrite it */
-- rx = buf;
-+ rx = buf + BGMAC_RX_BUF_OFFSET;
- rx->len = cpu_to_le16(0xdead);
- rx->flags = cpu_to_le16(0xbeef);
-
- /* Map skb for the DMA */
-- dma_addr = dma_map_single(dma_dev, buf, BGMAC_RX_BUF_SIZE,
-- DMA_FROM_DEVICE);
-+ dma_addr = dma_map_single(dma_dev, buf + BGMAC_RX_BUF_OFFSET,
-+ BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
- if (dma_mapping_error(dma_dev, dma_addr)) {
- bgmac_err(bgmac, "DMA mapping error\n");
- put_page(virt_to_head_page(buf));
-@@ -403,7 +403,7 @@ static int bgmac_dma_rx_read(struct bgma
- while (ring->start != ring->end) {
- struct device *dma_dev = bgmac->core->dma_dev;
- struct bgmac_slot_info *slot = &ring->slots[ring->start];
-- struct bgmac_rx_header *rx = slot->buf;
-+ struct bgmac_rx_header *rx = slot->buf + BGMAC_RX_BUF_OFFSET;
- struct sk_buff *skb;
- void *buf = slot->buf;
- u16 len, flags;
-@@ -454,8 +454,10 @@ static int bgmac_dma_rx_read(struct bgma
- BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
-
- skb = build_skb(buf, BGMAC_RX_ALLOC_SIZE);
-- skb_put(skb, BGMAC_RX_FRAME_OFFSET + len);
-- skb_pull(skb, BGMAC_RX_FRAME_OFFSET);
-+ skb_put(skb, BGMAC_RX_FRAME_OFFSET +
-+ BGMAC_RX_BUF_OFFSET + len);
-+ skb_pull(skb, BGMAC_RX_FRAME_OFFSET +
-+ BGMAC_RX_BUF_OFFSET);
-
- skb_checksum_none_assert(skb);
- skb->protocol = eth_type_trans(skb, bgmac->net_dev);
---- a/drivers/net/ethernet/broadcom/bgmac.h
-+++ b/drivers/net/ethernet/broadcom/bgmac.h
-@@ -360,9 +360,11 @@
-
- #define BGMAC_RX_HEADER_LEN 28 /* Last 24 bytes are unused. Well... */
- #define BGMAC_RX_FRAME_OFFSET 30 /* There are 2 unused bytes between header and real data */
-+#define BGMAC_RX_BUF_OFFSET (NET_SKB_PAD + NET_IP_ALIGN - \
-+ BGMAC_RX_FRAME_OFFSET)
- #define BGMAC_RX_MAX_FRAME_SIZE 1536 /* Copied from b44/tg3 */
- #define BGMAC_RX_BUF_SIZE (BGMAC_RX_FRAME_OFFSET + BGMAC_RX_MAX_FRAME_SIZE)
--#define BGMAC_RX_ALLOC_SIZE (SKB_DATA_ALIGN(BGMAC_RX_BUF_SIZE) + \
-+#define BGMAC_RX_ALLOC_SIZE (SKB_DATA_ALIGN(BGMAC_RX_BUF_SIZE + BGMAC_RX_BUF_OFFSET) + \
- SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))
-
- #define BGMAC_BFL_ENETROBO 0x0010 /* has ephy roboswitch spi */
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 12 Apr 2015 22:23:07 +0200
-Subject: [PATCH] bgmac: simplify/optimize rx DMA error handling
-
-Allocate a new buffer before processing the completed one. If allocation
-fails, reuse the old buffer.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -386,6 +386,19 @@ static void bgmac_dma_rx_setup_desc(stru
- dma_desc->ctl1 = cpu_to_le32(ctl1);
- }
-
-+static void bgmac_dma_rx_poison_buf(struct device *dma_dev,
-+ struct bgmac_slot_info *slot)
-+{
-+ struct bgmac_rx_header *rx = slot->buf + BGMAC_RX_BUF_OFFSET;
-+
-+ dma_sync_single_for_cpu(dma_dev, slot->dma_addr, BGMAC_RX_BUF_SIZE,
-+ DMA_FROM_DEVICE);
-+ rx->len = cpu_to_le16(0xdead);
-+ rx->flags = cpu_to_le16(0xbeef);
-+ dma_sync_single_for_device(dma_dev, slot->dma_addr, BGMAC_RX_BUF_SIZE,
-+ DMA_FROM_DEVICE);
-+}
-+
- static int bgmac_dma_rx_read(struct bgmac *bgmac, struct bgmac_dma_ring *ring,
- int weight)
- {
-@@ -406,53 +419,35 @@ static int bgmac_dma_rx_read(struct bgma
- struct bgmac_rx_header *rx = slot->buf + BGMAC_RX_BUF_OFFSET;
- struct sk_buff *skb;
- void *buf = slot->buf;
-+ dma_addr_t dma_addr = slot->dma_addr;
- u16 len, flags;
-
-- /* Unmap buffer to make it accessible to the CPU */
-- dma_sync_single_for_cpu(dma_dev, slot->dma_addr,
-- BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
--
-- /* Get info from the header */
-- len = le16_to_cpu(rx->len);
-- flags = le16_to_cpu(rx->flags);
--
- do {
-- dma_addr_t old_dma_addr = slot->dma_addr;
-- int err;
-+ /* Prepare new skb as replacement */
-+ if (bgmac_dma_rx_skb_for_slot(bgmac, slot)) {
-+ bgmac_dma_rx_poison_buf(dma_dev, slot);
-+ break;
-+ }
-+
-+ /* Unmap buffer to make it accessible to the CPU */
-+ dma_unmap_single(dma_dev, dma_addr,
-+ BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
-+
-+ /* Get info from the header */
-+ len = le16_to_cpu(rx->len);
-+ flags = le16_to_cpu(rx->flags);
-
- /* Check for poison and drop or pass the packet */
- if (len == 0xdead && flags == 0xbeef) {
- bgmac_err(bgmac, "Found poisoned packet at slot %d, DMA issue!\n",
- ring->start);
-- dma_sync_single_for_device(dma_dev,
-- slot->dma_addr,
-- BGMAC_RX_BUF_SIZE,
-- DMA_FROM_DEVICE);
-+ put_page(virt_to_head_page(buf));
- break;
- }
-
- /* Omit CRC. */
- len -= ETH_FCS_LEN;
-
-- /* Prepare new skb as replacement */
-- err = bgmac_dma_rx_skb_for_slot(bgmac, slot);
-- if (err) {
-- /* Poison the old skb */
-- rx->len = cpu_to_le16(0xdead);
-- rx->flags = cpu_to_le16(0xbeef);
--
-- dma_sync_single_for_device(dma_dev,
-- slot->dma_addr,
-- BGMAC_RX_BUF_SIZE,
-- DMA_FROM_DEVICE);
-- break;
-- }
-- bgmac_dma_rx_setup_desc(bgmac, ring, ring->start);
--
-- /* Unmap old skb, we'll pass it to the netfif */
-- dma_unmap_single(dma_dev, old_dma_addr,
-- BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
--
- skb = build_skb(buf, BGMAC_RX_ALLOC_SIZE);
- skb_put(skb, BGMAC_RX_FRAME_OFFSET +
- BGMAC_RX_BUF_OFFSET + len);
-@@ -465,6 +460,8 @@ static int bgmac_dma_rx_read(struct bgma
- handled++;
- } while (0);
-
-+ bgmac_dma_rx_setup_desc(bgmac, ring, ring->start);
-+
- if (++ring->start >= BGMAC_RX_RING_SLOTS)
- ring->start = 0;
-
-@@ -532,14 +529,14 @@ static void bgmac_dma_rx_ring_free(struc
-
- for (i = 0; i < ring->num_slots; i++) {
- slot = &ring->slots[i];
-- if (!slot->buf)
-+ if (!slot->dma_addr)
- continue;
-
-- if (slot->dma_addr)
-- dma_unmap_single(dma_dev, slot->dma_addr,
-- BGMAC_RX_BUF_SIZE,
-- DMA_FROM_DEVICE);
-+ dma_unmap_single(dma_dev, slot->dma_addr,
-+ BGMAC_RX_BUF_SIZE,
-+ DMA_FROM_DEVICE);
- put_page(virt_to_head_page(slot->buf));
-+ slot->dma_addr = 0;
- }
- }
-
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 12 Apr 2015 22:28:20 +0200
-Subject: [PATCH] bgmac: add check for oversized packets
-
-In very rare cases, the MAC can catch an internal buffer that is bigger
-than it's supposed to be. Instead of crashing the kernel, simply pass
-the buffer back to the hardware
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -445,6 +445,13 @@ static int bgmac_dma_rx_read(struct bgma
- break;
- }
-
-+ if (len > BGMAC_RX_ALLOC_SIZE) {
-+ bgmac_err(bgmac, "Found oversized packet at slot %d, DMA issue!\n",
-+ ring->start);
-+ put_page(virt_to_head_page(buf));
-+ break;
-+ }
-+
- /* Omit CRC. */
- len -= ETH_FCS_LEN;
-
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 12 Apr 2015 22:36:16 +0200
-Subject: [PATCH] bgmac: increase rx ring size from 511 to 512
-
-Limiting it to 511 looks like a failed attempt at leaving one descriptor
-empty to allow the hardware to stop processing a buffer that has not
-been prepared yet. However, this doesn't work because this affects the
-total ring size as well
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/broadcom/bgmac.h
-+++ b/drivers/net/ethernet/broadcom/bgmac.h
-@@ -356,7 +356,7 @@
- #define BGMAC_MAX_RX_RINGS 1
-
- #define BGMAC_TX_RING_SLOTS 128
--#define BGMAC_RX_RING_SLOTS 512 - 1 /* Why -1? Well, Broadcom does that... */
-+#define BGMAC_RX_RING_SLOTS 512
-
- #define BGMAC_RX_HEADER_LEN 28 /* Last 24 bytes are unused. Well... */
- #define BGMAC_RX_FRAME_OFFSET 30 /* There are 2 unused bytes between header and real data */
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 12 Apr 2015 23:19:32 +0200
-Subject: [PATCH] bgmac: simplify dma init/cleanup
-
-Instead of allocating buffers at device init time and initializing
-descriptors at device open, do both at the same time (during open).
-Free all buffers when closing the device.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -562,18 +562,26 @@ static void bgmac_dma_ring_desc_free(str
- ring->dma_base);
- }
-
--static void bgmac_dma_free(struct bgmac *bgmac)
-+static void bgmac_dma_cleanup(struct bgmac *bgmac)
- {
- int i;
-
-- for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) {
-+ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++)
- bgmac_dma_tx_ring_free(bgmac, &bgmac->tx_ring[i]);
-- bgmac_dma_ring_desc_free(bgmac, &bgmac->tx_ring[i]);
-- }
-- for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
-+
-+ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++)
- bgmac_dma_rx_ring_free(bgmac, &bgmac->rx_ring[i]);
-+}
-+
-+static void bgmac_dma_free(struct bgmac *bgmac)
-+{
-+ int i;
-+
-+ for (i = 0; i < BGMAC_MAX_TX_RINGS; i++)
-+ bgmac_dma_ring_desc_free(bgmac, &bgmac->tx_ring[i]);
-+
-+ for (i = 0; i < BGMAC_MAX_RX_RINGS; i++)
- bgmac_dma_ring_desc_free(bgmac, &bgmac->rx_ring[i]);
-- }
- }
-
- static int bgmac_dma_alloc(struct bgmac *bgmac)
-@@ -621,8 +629,6 @@ static int bgmac_dma_alloc(struct bgmac
- }
-
- for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
-- int j;
--
- ring = &bgmac->rx_ring[i];
- ring->num_slots = BGMAC_RX_RING_SLOTS;
- ring->mmio_base = ring_base[i];
-@@ -645,15 +651,6 @@ static int bgmac_dma_alloc(struct bgmac
- ring->index_base = lower_32_bits(ring->dma_base);
- else
- ring->index_base = 0;
--
-- /* Alloc RX slots */
-- for (j = 0; j < ring->num_slots; j++) {
-- err = bgmac_dma_rx_skb_for_slot(bgmac, &ring->slots[j]);
-- if (err) {
-- bgmac_err(bgmac, "Can't allocate skb for slot in RX ring\n");
-- goto err_dma_free;
-- }
-- }
- }
-
- return 0;
-@@ -663,10 +660,10 @@ err_dma_free:
- return -ENOMEM;
- }
-
--static void bgmac_dma_init(struct bgmac *bgmac)
-+static int bgmac_dma_init(struct bgmac *bgmac)
- {
- struct bgmac_dma_ring *ring;
-- int i;
-+ int i, err;
-
- for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) {
- ring = &bgmac->tx_ring[i];
-@@ -698,8 +695,13 @@ static void bgmac_dma_init(struct bgmac
- if (ring->unaligned)
- bgmac_dma_rx_enable(bgmac, ring);
-
-- for (j = 0; j < ring->num_slots; j++)
-+ for (j = 0; j < ring->num_slots; j++) {
-+ err = bgmac_dma_rx_skb_for_slot(bgmac, &ring->slots[j]);
-+ if (err)
-+ goto error;
-+
- bgmac_dma_rx_setup_desc(bgmac, ring, j);
-+ }
-
- bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_INDEX,
- ring->index_base +
-@@ -708,6 +710,12 @@ static void bgmac_dma_init(struct bgmac
- ring->start = 0;
- ring->end = 0;
- }
-+
-+ return 0;
-+
-+error:
-+ bgmac_dma_cleanup(bgmac);
-+ return err;
- }
-
- /**************************************************
-@@ -1183,11 +1191,8 @@ static void bgmac_enable(struct bgmac *b
- }
-
- /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipinit */
--static void bgmac_chip_init(struct bgmac *bgmac, bool full_init)
-+static void bgmac_chip_init(struct bgmac *bgmac)
- {
-- struct bgmac_dma_ring *ring;
-- int i;
--
- /* 1 interrupt per received frame */
- bgmac_write(bgmac, BGMAC_INT_RECV_LAZY, 1 << BGMAC_IRL_FC_SHIFT);
-
-@@ -1205,16 +1210,7 @@ static void bgmac_chip_init(struct bgmac
-
- bgmac_write(bgmac, BGMAC_RXMAX_LENGTH, 32 + ETHER_MAX_LEN);
-
-- if (full_init) {
-- bgmac_dma_init(bgmac);
-- if (1) /* FIXME: is there any case we don't want IRQs? */
-- bgmac_chip_intrs_on(bgmac);
-- } else {
-- for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
-- ring = &bgmac->rx_ring[i];
-- bgmac_dma_rx_enable(bgmac, ring);
-- }
-- }
-+ bgmac_chip_intrs_on(bgmac);
-
- bgmac_enable(bgmac);
- }
-@@ -1274,23 +1270,27 @@ static int bgmac_open(struct net_device
- int err = 0;
-
- bgmac_chip_reset(bgmac);
-+
-+ err = bgmac_dma_init(bgmac);
-+ if (err)
-+ return err;
-+
- /* Specs say about reclaiming rings here, but we do that in DMA init */
-- bgmac_chip_init(bgmac, true);
-+ bgmac_chip_init(bgmac);
-
- err = request_irq(bgmac->core->irq, bgmac_interrupt, IRQF_SHARED,
- KBUILD_MODNAME, net_dev);
- if (err < 0) {
- bgmac_err(bgmac, "IRQ request error: %d!\n", err);
-- goto err_out;
-+ bgmac_dma_cleanup(bgmac);
-+ return err;
- }
- napi_enable(&bgmac->napi);
-
- phy_start(bgmac->phy_dev);
-
- netif_carrier_on(net_dev);
--
--err_out:
-- return err;
-+ return 0;
- }
-
- static int bgmac_stop(struct net_device *net_dev)
-@@ -1306,6 +1306,7 @@ static int bgmac_stop(struct net_device
- free_irq(bgmac->core->irq, net_dev);
-
- bgmac_chip_reset(bgmac);
-+ bgmac_dma_cleanup(bgmac);
-
- return 0;
- }
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 12 Apr 2015 11:59:47 +0200
-Subject: [PATCH] bgmac: fix DMA rx corruption
-
-The driver needs to inform the hardware about the first invalid (not yet
-filled) rx slot, by writing its DMA descriptor pointer offset to the
-BGMAC_DMA_RX_INDEX register.
-
-This register was set to a value exceeding the rx ring size, effectively
-allowing the hardware constant access to the full ring, regardless of
-which slots are initialized.
-
-To fix this issue, always mark the last filled rx slot as invalid.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -366,6 +366,16 @@ static int bgmac_dma_rx_skb_for_slot(str
- return 0;
- }
-
-+static void bgmac_dma_rx_update_index(struct bgmac *bgmac,
-+ struct bgmac_dma_ring *ring)
-+{
-+ wmb();
-+
-+ bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_INDEX,
-+ ring->index_base +
-+ ring->end * sizeof(struct bgmac_dma_desc));
-+}
-+
- static void bgmac_dma_rx_setup_desc(struct bgmac *bgmac,
- struct bgmac_dma_ring *ring, int desc_idx)
- {
-@@ -384,6 +394,8 @@ static void bgmac_dma_rx_setup_desc(stru
- dma_desc->addr_high = cpu_to_le32(upper_32_bits(ring->slots[desc_idx].dma_addr));
- dma_desc->ctl0 = cpu_to_le32(ctl0);
- dma_desc->ctl1 = cpu_to_le32(ctl1);
-+
-+ ring->end = desc_idx;
- }
-
- static void bgmac_dma_rx_poison_buf(struct device *dma_dev,
-@@ -411,9 +423,7 @@ static int bgmac_dma_rx_read(struct bgma
- end_slot &= BGMAC_DMA_RX_STATDPTR;
- end_slot /= sizeof(struct bgmac_dma_desc);
-
-- ring->end = end_slot;
--
-- while (ring->start != ring->end) {
-+ while (ring->start != end_slot) {
- struct device *dma_dev = bgmac->core->dma_dev;
- struct bgmac_slot_info *slot = &ring->slots[ring->start];
- struct bgmac_rx_header *rx = slot->buf + BGMAC_RX_BUF_OFFSET;
-@@ -476,6 +486,8 @@ static int bgmac_dma_rx_read(struct bgma
- break;
- }
-
-+ bgmac_dma_rx_update_index(bgmac, ring);
-+
- return handled;
- }
-
-@@ -695,6 +707,8 @@ static int bgmac_dma_init(struct bgmac *
- if (ring->unaligned)
- bgmac_dma_rx_enable(bgmac, ring);
-
-+ ring->start = 0;
-+ ring->end = 0;
- for (j = 0; j < ring->num_slots; j++) {
- err = bgmac_dma_rx_skb_for_slot(bgmac, &ring->slots[j]);
- if (err)
-@@ -703,12 +717,7 @@ static int bgmac_dma_init(struct bgmac *
- bgmac_dma_rx_setup_desc(bgmac, ring, j);
- }
-
-- bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_INDEX,
-- ring->index_base +
-- ring->num_slots * sizeof(struct bgmac_dma_desc));
--
-- ring->start = 0;
-- ring->end = 0;
-+ bgmac_dma_rx_update_index(bgmac, ring);
- }
-
- return 0;
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 12 Apr 2015 23:28:38 +0200
-Subject: [PATCH] bgmac: drop ring->num_slots
-
-The ring size is always known at compile time, so make the code a bit
-more efficient
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -123,7 +123,7 @@ bgmac_dma_tx_add_buf(struct bgmac *bgmac
- struct bgmac_dma_desc *dma_desc;
- u32 ctl1;
-
-- if (i == ring->num_slots - 1)
-+ if (i == BGMAC_TX_RING_SLOTS - 1)
- ctl0 |= BGMAC_DESC_CTL0_EOT;
-
- ctl1 = len & BGMAC_DESC_CTL1_LEN;
-@@ -382,7 +382,7 @@ static void bgmac_dma_rx_setup_desc(stru
- struct bgmac_dma_desc *dma_desc = ring->cpu_base + desc_idx;
- u32 ctl0 = 0, ctl1 = 0;
-
-- if (desc_idx == ring->num_slots - 1)
-+ if (desc_idx == BGMAC_RX_RING_SLOTS - 1)
- ctl0 |= BGMAC_DESC_CTL0_EOT;
- ctl1 |= BGMAC_RX_BUF_SIZE & BGMAC_DESC_CTL1_LEN;
- /* Is there any BGMAC device that requires extension? */
-@@ -521,7 +521,7 @@ static void bgmac_dma_tx_ring_free(struc
- struct bgmac_slot_info *slot;
- int i;
-
-- for (i = 0; i < ring->num_slots; i++) {
-+ for (i = 0; i < BGMAC_TX_RING_SLOTS; i++) {
- int len = dma_desc[i].ctl1 & BGMAC_DESC_CTL1_LEN;
-
- slot = &ring->slots[i];
-@@ -546,7 +546,7 @@ static void bgmac_dma_rx_ring_free(struc
- struct bgmac_slot_info *slot;
- int i;
-
-- for (i = 0; i < ring->num_slots; i++) {
-+ for (i = 0; i < BGMAC_RX_RING_SLOTS; i++) {
- slot = &ring->slots[i];
- if (!slot->dma_addr)
- continue;
-@@ -560,7 +560,8 @@ static void bgmac_dma_rx_ring_free(struc
- }
-
- static void bgmac_dma_ring_desc_free(struct bgmac *bgmac,
-- struct bgmac_dma_ring *ring)
-+ struct bgmac_dma_ring *ring,
-+ int num_slots)
- {
- struct device *dma_dev = bgmac->core->dma_dev;
- int size;
-@@ -569,7 +570,7 @@ static void bgmac_dma_ring_desc_free(str
- return;
-
- /* Free ring of descriptors */
-- size = ring->num_slots * sizeof(struct bgmac_dma_desc);
-+ size = num_slots * sizeof(struct bgmac_dma_desc);
- dma_free_coherent(dma_dev, size, ring->cpu_base,
- ring->dma_base);
- }
-@@ -590,10 +591,12 @@ static void bgmac_dma_free(struct bgmac
- int i;
-
- for (i = 0; i < BGMAC_MAX_TX_RINGS; i++)
-- bgmac_dma_ring_desc_free(bgmac, &bgmac->tx_ring[i]);
-+ bgmac_dma_ring_desc_free(bgmac, &bgmac->tx_ring[i],
-+ BGMAC_TX_RING_SLOTS);
-
- for (i = 0; i < BGMAC_MAX_RX_RINGS; i++)
-- bgmac_dma_ring_desc_free(bgmac, &bgmac->rx_ring[i]);
-+ bgmac_dma_ring_desc_free(bgmac, &bgmac->rx_ring[i],
-+ BGMAC_RX_RING_SLOTS);
- }
-
- static int bgmac_dma_alloc(struct bgmac *bgmac)
-@@ -616,11 +619,10 @@ static int bgmac_dma_alloc(struct bgmac
-
- for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) {
- ring = &bgmac->tx_ring[i];
-- ring->num_slots = BGMAC_TX_RING_SLOTS;
- ring->mmio_base = ring_base[i];
-
- /* Alloc ring of descriptors */
-- size = ring->num_slots * sizeof(struct bgmac_dma_desc);
-+ size = BGMAC_TX_RING_SLOTS * sizeof(struct bgmac_dma_desc);
- ring->cpu_base = dma_zalloc_coherent(dma_dev, size,
- &ring->dma_base,
- GFP_KERNEL);
-@@ -642,11 +644,10 @@ static int bgmac_dma_alloc(struct bgmac
-
- for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
- ring = &bgmac->rx_ring[i];
-- ring->num_slots = BGMAC_RX_RING_SLOTS;
- ring->mmio_base = ring_base[i];
-
- /* Alloc ring of descriptors */
-- size = ring->num_slots * sizeof(struct bgmac_dma_desc);
-+ size = BGMAC_RX_RING_SLOTS * sizeof(struct bgmac_dma_desc);
- ring->cpu_base = dma_zalloc_coherent(dma_dev, size,
- &ring->dma_base,
- GFP_KERNEL);
-@@ -709,7 +710,7 @@ static int bgmac_dma_init(struct bgmac *
-
- ring->start = 0;
- ring->end = 0;
-- for (j = 0; j < ring->num_slots; j++) {
-+ for (j = 0; j < BGMAC_RX_RING_SLOTS; j++) {
- err = bgmac_dma_rx_skb_for_slot(bgmac, &ring->slots[j]);
- if (err)
- goto error;
---- a/drivers/net/ethernet/broadcom/bgmac.h
-+++ b/drivers/net/ethernet/broadcom/bgmac.h
-@@ -419,11 +419,10 @@ struct bgmac_dma_ring {
- u32 start;
- u32 end;
-
-- u16 num_slots;
-- u16 mmio_base;
- struct bgmac_dma_desc *cpu_base;
- dma_addr_t dma_base;
- u32 index_base; /* Used for unaligned rings only, otherwise 0 */
-+ u16 mmio_base;
- bool unaligned;
-
- struct bgmac_slot_info slots[BGMAC_RX_RING_SLOTS];
+++ /dev/null
-From b4dfd8e92956b396d3438212bc9a0be6267b8b34 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Tue, 12 Apr 2016 13:30:45 +0200
-Subject: [PATCH] bgmac: reset & enable Ethernet core before using it
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes Ethernet on D-Link DIR-885L with BCM47094 SoC. Felix reported
-similar fix was needed for his BCM4709 device (Buffalo WXR-1900DHP?).
-I tested this for regressions on BCM4706, BCM4708A0 and BCM47081A0.
-
-Cc: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -1569,6 +1569,11 @@ static int bgmac_probe(struct bcma_devic
- */
- bcma_core_enable(core, 0);
-
-+ /* This (reset &) enable is not preset in specs or reference driver but
-+ * Broadcom does it in arch PCI code when enabling fake PCI device.
-+ */
-+ bcma_core_enable(core, 0);
-+
- /* Allocation and references */
- net_dev = alloc_etherdev(sizeof(*bgmac));
- if (!net_dev)
+++ /dev/null
-From c02bc350f9dbce7d637c394a6e1c4d29dc5b28b2 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 12 Apr 2016 18:27:29 +0200
-Subject: [PATCH] bgmac: fix MAC soft-reset bit for corerev > 4
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Only core revisions older than 4 use BGMAC_CMDCFG_SR_REV0. This mainly
-fixes support for BCM4708A0KF SoCs with Ethernet core rev 5 (it means
-only some devices as most of BCM4708A0KF-s got core rev 4).
-This was tested for regressions on BCM47094 which doesn't seem to care
-which bit gets used.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/ethernet/broadcom/bgmac.h
-+++ b/drivers/net/ethernet/broadcom/bgmac.h
-@@ -198,9 +198,9 @@
- #define BGMAC_CMDCFG_TAI 0x00000200
- #define BGMAC_CMDCFG_HD 0x00000400 /* Set if in half duplex mode */
- #define BGMAC_CMDCFG_HD_SHIFT 10
--#define BGMAC_CMDCFG_SR_REV0 0x00000800 /* Set to reset mode, for other revs */
--#define BGMAC_CMDCFG_SR_REV4 0x00002000 /* Set to reset mode, only for core rev 4 */
--#define BGMAC_CMDCFG_SR(rev) ((rev == 4) ? BGMAC_CMDCFG_SR_REV4 : BGMAC_CMDCFG_SR_REV0)
-+#define BGMAC_CMDCFG_SR_REV0 0x00000800 /* Set to reset mode, for core rev 0-3 */
-+#define BGMAC_CMDCFG_SR_REV4 0x00002000 /* Set to reset mode, for core rev >= 4 */
-+#define BGMAC_CMDCFG_SR(rev) ((rev >= 4) ? BGMAC_CMDCFG_SR_REV4 : BGMAC_CMDCFG_SR_REV0)
- #define BGMAC_CMDCFG_ML 0x00008000 /* Set to activate mac loopback mode */
- #define BGMAC_CMDCFG_AE 0x00400000
- #define BGMAC_CMDCFG_CFE 0x00800000
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Tue, 2 Dec 2014 10:58:21 -0800
-Subject: [PATCH] fib_trie: Fix /proc/net/fib_trie when
- CONFIG_IP_MULTIPLE_TABLES is not defined
-
-In recent testing I had disabled CONFIG_IP_MULTIPLE_TABLES and as a result
-when I ran "cat /proc/net/fib_trie" the main trie was displayed multiple
-times. I found that the problem line of code was in the function
-fib_trie_seq_next. Specifically the line below caused the indexes to go in
-the opposite direction of our traversal:
-
- h = tb->tb_id & (FIB_TABLE_HASHSZ - 1);
-
-This issue was that the RT tables are defined such that RT_TABLE_LOCAL is ID
-255, while it is located at TABLE_LOCAL_INDEX of 0, and RT_TABLE_MAIN is 254
-with a TABLE_MAIN_INDEX of 1. This means that the above line will return 1
-for the local table and 0 for main. The result is that fib_trie_seq_next
-will return NULL at the end of the local table, fib_trie_seq_start will
-return the start of the main table, and then fib_trie_seq_next will loop on
-main forever as h will always return 0.
-
-The fix for this is to reverse the ordering of the two tables. It has the
-advantage of making it so that the tables now print in the same order
-regardless of if multiple tables are enabled or not. In order to make the
-definition consistent with the multiple tables case I simply masked the to
-RT_TABLE_XXX values by (FIB_TABLE_HASHSZ - 1). This way the two table
-layouts should always stay consistent.
-
-Fixes: 93456b6 ("[IPV4]: Unify access to the routing tables")
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/include/net/ip_fib.h
-+++ b/include/net/ip_fib.h
-@@ -201,8 +201,8 @@ void fib_free_table(struct fib_table *tb
-
- #ifndef CONFIG_IP_MULTIPLE_TABLES
-
--#define TABLE_LOCAL_INDEX 0
--#define TABLE_MAIN_INDEX 1
-+#define TABLE_LOCAL_INDEX (RT_TABLE_LOCAL & (FIB_TABLE_HASHSZ - 1))
-+#define TABLE_MAIN_INDEX (RT_TABLE_MAIN & (FIB_TABLE_HASHSZ - 1))
-
- static inline struct fib_table *fib_get_table(struct net *net, u32 id)
- {
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Wed, 10 Dec 2014 21:49:22 -0800
-Subject: [PATCH] fib_trie: Fix trie balancing issue if new node pushes down
- existing node
-
-This patch addresses an issue with the level compression of the fib_trie.
-Specifically in the case of adding a new leaf that triggers a new node to
-be added that takes the place of the old node. The result is a trie where
-the 1 child tnode is on one side and one leaf is on the other which gives
-you a very deep trie. Below is the script I used to generate a trie on
-dummy0 with a 10.X.X.X family of addresses.
-
- ip link add type dummy
- ipval=184549374
- bit=2
- for i in `seq 1 23`
- do
- ifconfig dummy0:$bit $ipval/8
- ipval=`expr $ipval - $bit`
- bit=`expr $bit \* 2`
- done
- cat /proc/net/fib_triestat
-
-Running the script before the patch:
-
- Local:
- Aver depth: 10.82
- Max depth: 23
- Leaves: 29
- Prefixes: 30
- Internal nodes: 27
- 1: 26 2: 1
- Pointers: 56
- Null ptrs: 1
- Total size: 5 kB
-
-After applying the patch and repeating:
-
- Local:
- Aver depth: 4.72
- Max depth: 9
- Leaves: 29
- Prefixes: 30
- Internal nodes: 12
- 1: 3 2: 2 3: 7
- Pointers: 70
- Null ptrs: 30
- Total size: 4 kB
-
-What this fix does is start the rebalance at the newly created tnode
-instead of at the parent tnode. This way if there is a gap between the
-parent and the new node it doesn't prevent the new tnode from being
-coalesced with any pre-existing nodes that may have been pushed into one
-of the new nodes child branches.
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -1143,8 +1143,9 @@ static struct list_head *fib_insert_node
- put_child(tp, cindex, (struct rt_trie_node *)tn);
- } else {
- rcu_assign_pointer(t->trie, (struct rt_trie_node *)tn);
-- tp = tn;
- }
-+
-+ tp = tn;
- }
-
- if (tp && tp->pos + tp->bits > 32)
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Wed, 31 Dec 2014 10:55:29 -0800
-Subject: [PATCH] fib_trie: Update usage stats to be percpu instead of
- global variables
-
-The trie usage stats were currently being shared by all threads that were
-calling fib_table_lookup. As a result when multiple threads were
-performing lookups simultaneously the trie would begin to cache bounce
-between those threads.
-
-In order to prevent this I have updated the usage stats to use a set of
-percpu variables. By doing this we should be able to avoid the cache
-bouncing and still make use of these stats.
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/ipv4/fib_frontend.c
-+++ b/net/ipv4/fib_frontend.c
-@@ -67,7 +67,7 @@ static int __net_init fib4_rules_init(st
- return 0;
-
- fail:
-- kfree(local_table);
-+ fib_free_table(local_table);
- return -ENOMEM;
- }
- #else
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -153,7 +153,7 @@ struct trie_stat {
- struct trie {
- struct rt_trie_node __rcu *trie;
- #ifdef CONFIG_IP_FIB_TRIE_STATS
-- struct trie_use_stats stats;
-+ struct trie_use_stats __percpu *stats;
- #endif
- };
-
-@@ -631,7 +631,7 @@ static struct rt_trie_node *resize(struc
- if (IS_ERR(tn)) {
- tn = old_tn;
- #ifdef CONFIG_IP_FIB_TRIE_STATS
-- t->stats.resize_node_skipped++;
-+ this_cpu_inc(t->stats->resize_node_skipped);
- #endif
- break;
- }
-@@ -658,7 +658,7 @@ static struct rt_trie_node *resize(struc
- if (IS_ERR(tn)) {
- tn = old_tn;
- #ifdef CONFIG_IP_FIB_TRIE_STATS
-- t->stats.resize_node_skipped++;
-+ this_cpu_inc(t->stats->resize_node_skipped);
- #endif
- break;
- }
-@@ -1357,7 +1357,7 @@ static int check_leaf(struct fib_table *
- err = fib_props[fa->fa_type].error;
- if (err) {
- #ifdef CONFIG_IP_FIB_TRIE_STATS
-- t->stats.semantic_match_passed++;
-+ this_cpu_inc(t->stats->semantic_match_passed);
- #endif
- return err;
- }
-@@ -1372,7 +1372,7 @@ static int check_leaf(struct fib_table *
- continue;
-
- #ifdef CONFIG_IP_FIB_TRIE_STATS
-- t->stats.semantic_match_passed++;
-+ this_cpu_inc(t->stats->semantic_match_passed);
- #endif
- res->prefixlen = li->plen;
- res->nh_sel = nhsel;
-@@ -1388,7 +1388,7 @@ static int check_leaf(struct fib_table *
- }
-
- #ifdef CONFIG_IP_FIB_TRIE_STATS
-- t->stats.semantic_match_miss++;
-+ this_cpu_inc(t->stats->semantic_match_miss);
- #endif
- }
-
-@@ -1399,6 +1399,9 @@ int fib_table_lookup(struct fib_table *t
- struct fib_result *res, int fib_flags)
- {
- struct trie *t = (struct trie *) tb->tb_data;
-+#ifdef CONFIG_IP_FIB_TRIE_STATS
-+ struct trie_use_stats __percpu *stats = t->stats;
-+#endif
- int ret;
- struct rt_trie_node *n;
- struct tnode *pn;
-@@ -1417,7 +1420,7 @@ int fib_table_lookup(struct fib_table *t
- goto failed;
-
- #ifdef CONFIG_IP_FIB_TRIE_STATS
-- t->stats.gets++;
-+ this_cpu_inc(stats->gets);
- #endif
-
- /* Just a leaf? */
-@@ -1441,7 +1444,7 @@ int fib_table_lookup(struct fib_table *t
-
- if (n == NULL) {
- #ifdef CONFIG_IP_FIB_TRIE_STATS
-- t->stats.null_node_hit++;
-+ this_cpu_inc(stats->null_node_hit);
- #endif
- goto backtrace;
- }
-@@ -1576,7 +1579,7 @@ backtrace:
- chopped_off = 0;
-
- #ifdef CONFIG_IP_FIB_TRIE_STATS
-- t->stats.backtrack++;
-+ this_cpu_inc(stats->backtrack);
- #endif
- goto backtrace;
- }
-@@ -1830,6 +1833,11 @@ int fib_table_flush(struct fib_table *tb
-
- void fib_free_table(struct fib_table *tb)
- {
-+#ifdef CONFIG_IP_FIB_TRIE_STATS
-+ struct trie *t = (struct trie *)tb->tb_data;
-+
-+ free_percpu(t->stats);
-+#endif /* CONFIG_IP_FIB_TRIE_STATS */
- kfree(tb);
- }
-
-@@ -1973,7 +1981,14 @@ struct fib_table *fib_trie_table(u32 id)
- tb->tb_num_default = 0;
-
- t = (struct trie *) tb->tb_data;
-- memset(t, 0, sizeof(*t));
-+ RCU_INIT_POINTER(t->trie, NULL);
-+#ifdef CONFIG_IP_FIB_TRIE_STATS
-+ t->stats = alloc_percpu(struct trie_use_stats);
-+ if (!t->stats) {
-+ kfree(tb);
-+ tb = NULL;
-+ }
-+#endif
-
- return tb;
- }
-@@ -2139,18 +2154,31 @@ static void trie_show_stats(struct seq_f
-
- #ifdef CONFIG_IP_FIB_TRIE_STATS
- static void trie_show_usage(struct seq_file *seq,
-- const struct trie_use_stats *stats)
-+ const struct trie_use_stats __percpu *stats)
- {
-+ struct trie_use_stats s = { 0 };
-+ int cpu;
-+
-+ /* loop through all of the CPUs and gather up the stats */
-+ for_each_possible_cpu(cpu) {
-+ const struct trie_use_stats *pcpu = per_cpu_ptr(stats, cpu);
-+
-+ s.gets += pcpu->gets;
-+ s.backtrack += pcpu->backtrack;
-+ s.semantic_match_passed += pcpu->semantic_match_passed;
-+ s.semantic_match_miss += pcpu->semantic_match_miss;
-+ s.null_node_hit += pcpu->null_node_hit;
-+ s.resize_node_skipped += pcpu->resize_node_skipped;
-+ }
-+
- seq_printf(seq, "\nCounters:\n---------\n");
-- seq_printf(seq, "gets = %u\n", stats->gets);
-- seq_printf(seq, "backtracks = %u\n", stats->backtrack);
-+ seq_printf(seq, "gets = %u\n", s.gets);
-+ seq_printf(seq, "backtracks = %u\n", s.backtrack);
- seq_printf(seq, "semantic match passed = %u\n",
-- stats->semantic_match_passed);
-- seq_printf(seq, "semantic match miss = %u\n",
-- stats->semantic_match_miss);
-- seq_printf(seq, "null node hit= %u\n", stats->null_node_hit);
-- seq_printf(seq, "skipped node resize = %u\n\n",
-- stats->resize_node_skipped);
-+ s.semantic_match_passed);
-+ seq_printf(seq, "semantic match miss = %u\n", s.semantic_match_miss);
-+ seq_printf(seq, "null node hit= %u\n", s.null_node_hit);
-+ seq_printf(seq, "skipped node resize = %u\n\n", s.resize_node_skipped);
- }
- #endif /* CONFIG_IP_FIB_TRIE_STATS */
-
-@@ -2191,7 +2219,7 @@ static int fib_triestat_seq_show(struct
- trie_collect_stats(t, &stat);
- trie_show_stats(seq, &stat);
- #ifdef CONFIG_IP_FIB_TRIE_STATS
-- trie_show_usage(seq, &t->stats);
-+ trie_show_usage(seq, t->stats);
- #endif
- }
- }
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Wed, 31 Dec 2014 10:55:35 -0800
-Subject: [PATCH] fib_trie: Make leaf and tnode more uniform
-
-This change makes some fundamental changes to the way leaves and tnodes are
-constructed. The big differences are:
-1. Leaves now populate pos and bits indicating their full key size.
-2. Trie nodes now mask out their lower bits to be consistent with the leaf
-3. Both structures have been reordered so that rt_trie_node now consisists
- of a much larger region including the pos, bits, and rcu portions of
- the tnode structure.
-
-On 32b systems this will result in the leaf being 4B larger as the pos and
-bits values were added to a hole created by the key as it was only 4B in
-length.
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -87,24 +87,38 @@
-
- typedef unsigned int t_key;
-
--#define T_TNODE 0
--#define T_LEAF 1
--#define NODE_TYPE_MASK 0x1UL
--#define NODE_TYPE(node) ((node)->parent & NODE_TYPE_MASK)
-+#define IS_TNODE(n) ((n)->bits)
-+#define IS_LEAF(n) (!(n)->bits)
-
--#define IS_TNODE(n) (!(n->parent & T_LEAF))
--#define IS_LEAF(n) (n->parent & T_LEAF)
-+struct tnode {
-+ t_key key;
-+ unsigned char bits; /* 2log(KEYLENGTH) bits needed */
-+ unsigned char pos; /* 2log(KEYLENGTH) bits needed */
-+ struct tnode __rcu *parent;
-+ union {
-+ struct rcu_head rcu;
-+ struct tnode *tnode_free;
-+ };
-+ unsigned int full_children; /* KEYLENGTH bits needed */
-+ unsigned int empty_children; /* KEYLENGTH bits needed */
-+ struct rt_trie_node __rcu *child[0];
-+};
-
- struct rt_trie_node {
-- unsigned long parent;
- t_key key;
-+ unsigned char bits;
-+ unsigned char pos;
-+ struct tnode __rcu *parent;
-+ struct rcu_head rcu;
- };
-
- struct leaf {
-- unsigned long parent;
- t_key key;
-- struct hlist_head list;
-+ unsigned char bits;
-+ unsigned char pos;
-+ struct tnode __rcu *parent;
- struct rcu_head rcu;
-+ struct hlist_head list;
- };
-
- struct leaf_info {
-@@ -115,20 +129,6 @@ struct leaf_info {
- struct rcu_head rcu;
- };
-
--struct tnode {
-- unsigned long parent;
-- t_key key;
-- unsigned char pos; /* 2log(KEYLENGTH) bits needed */
-- unsigned char bits; /* 2log(KEYLENGTH) bits needed */
-- unsigned int full_children; /* KEYLENGTH bits needed */
-- unsigned int empty_children; /* KEYLENGTH bits needed */
-- union {
-- struct rcu_head rcu;
-- struct tnode *tnode_free;
-- };
-- struct rt_trie_node __rcu *child[0];
--};
--
- #ifdef CONFIG_IP_FIB_TRIE_STATS
- struct trie_use_stats {
- unsigned int gets;
-@@ -176,38 +176,27 @@ static const int sync_pages = 128;
- static struct kmem_cache *fn_alias_kmem __read_mostly;
- static struct kmem_cache *trie_leaf_kmem __read_mostly;
-
--/*
-- * caller must hold RTNL
-- */
--static inline struct tnode *node_parent(const struct rt_trie_node *node)
--{
-- unsigned long parent;
-+/* caller must hold RTNL */
-+#define node_parent(n) rtnl_dereference((n)->parent)
-
-- parent = rcu_dereference_index_check(node->parent, lockdep_rtnl_is_held());
-+/* caller must hold RCU read lock or RTNL */
-+#define node_parent_rcu(n) rcu_dereference_rtnl((n)->parent)
-
-- return (struct tnode *)(parent & ~NODE_TYPE_MASK);
--}
--
--/*
-- * caller must hold RCU read lock or RTNL
-- */
--static inline struct tnode *node_parent_rcu(const struct rt_trie_node *node)
-+/* wrapper for rcu_assign_pointer */
-+static inline void node_set_parent(struct rt_trie_node *node, struct tnode *ptr)
- {
-- unsigned long parent;
--
-- parent = rcu_dereference_index_check(node->parent, rcu_read_lock_held() ||
-- lockdep_rtnl_is_held());
--
-- return (struct tnode *)(parent & ~NODE_TYPE_MASK);
-+ if (node)
-+ rcu_assign_pointer(node->parent, ptr);
- }
-
--/* Same as rcu_assign_pointer
-- * but that macro() assumes that value is a pointer.
-+#define NODE_INIT_PARENT(n, p) RCU_INIT_POINTER((n)->parent, p)
-+
-+/* This provides us with the number of children in this node, in the case of a
-+ * leaf this will return 0 meaning none of the children are accessible.
- */
--static inline void node_set_parent(struct rt_trie_node *node, struct tnode *ptr)
-+static inline int tnode_child_length(const struct tnode *tn)
- {
-- smp_wmb();
-- node->parent = (unsigned long)ptr | NODE_TYPE(node);
-+ return (1ul << tn->bits) & ~(1ul);
- }
-
- /*
-@@ -215,7 +204,7 @@ static inline void node_set_parent(struc
- */
- static inline struct rt_trie_node *tnode_get_child(const struct tnode *tn, unsigned int i)
- {
-- BUG_ON(i >= 1U << tn->bits);
-+ BUG_ON(i >= tnode_child_length(tn));
-
- return rtnl_dereference(tn->child[i]);
- }
-@@ -225,16 +214,11 @@ static inline struct rt_trie_node *tnode
- */
- static inline struct rt_trie_node *tnode_get_child_rcu(const struct tnode *tn, unsigned int i)
- {
-- BUG_ON(i >= 1U << tn->bits);
-+ BUG_ON(i >= tnode_child_length(tn));
-
- return rcu_dereference_rtnl(tn->child[i]);
- }
-
--static inline int tnode_child_length(const struct tnode *tn)
--{
-- return 1 << tn->bits;
--}
--
- static inline t_key mask_pfx(t_key k, unsigned int l)
- {
- return (l == 0) ? 0 : k >> (KEYLENGTH-l) << (KEYLENGTH-l);
-@@ -336,11 +320,6 @@ static inline int tkey_mismatch(t_key a,
-
- */
-
--static inline void check_tnode(const struct tnode *tn)
--{
-- WARN_ON(tn && tn->pos+tn->bits > 32);
--}
--
- static const int halve_threshold = 25;
- static const int inflate_threshold = 50;
- static const int halve_threshold_root = 15;
-@@ -426,11 +405,20 @@ static void tnode_free_flush(void)
- }
- }
-
--static struct leaf *leaf_new(void)
-+static struct leaf *leaf_new(t_key key)
- {
- struct leaf *l = kmem_cache_alloc(trie_leaf_kmem, GFP_KERNEL);
- if (l) {
-- l->parent = T_LEAF;
-+ l->parent = NULL;
-+ /* set key and pos to reflect full key value
-+ * any trailing zeros in the key should be ignored
-+ * as the nodes are searched
-+ */
-+ l->key = key;
-+ l->pos = KEYLENGTH;
-+ /* set bits to 0 indicating we are not a tnode */
-+ l->bits = 0;
-+
- INIT_HLIST_HEAD(&l->list);
- }
- return l;
-@@ -451,12 +439,16 @@ static struct tnode *tnode_new(t_key key
- {
- size_t sz = sizeof(struct tnode) + (sizeof(struct rt_trie_node *) << bits);
- struct tnode *tn = tnode_alloc(sz);
-+ unsigned int shift = pos + bits;
-+
-+ /* verify bits and pos their msb bits clear and values are valid */
-+ BUG_ON(!bits || (shift > KEYLENGTH));
-
- if (tn) {
-- tn->parent = T_TNODE;
-+ tn->parent = NULL;
- tn->pos = pos;
- tn->bits = bits;
-- tn->key = key;
-+ tn->key = mask_pfx(key, pos);
- tn->full_children = 0;
- tn->empty_children = 1<<bits;
- }
-@@ -473,10 +465,7 @@ static struct tnode *tnode_new(t_key key
-
- static inline int tnode_full(const struct tnode *tn, const struct rt_trie_node *n)
- {
-- if (n == NULL || IS_LEAF(n))
-- return 0;
--
-- return ((struct tnode *) n)->pos == tn->pos + tn->bits;
-+ return n && IS_TNODE(n) && (n->pos == (tn->pos + tn->bits));
- }
-
- static inline void put_child(struct tnode *tn, int i,
-@@ -514,8 +503,7 @@ static void tnode_put_child_reorg(struct
- else if (!wasfull && isfull)
- tn->full_children++;
-
-- if (n)
-- node_set_parent(n, tn);
-+ node_set_parent(n, tn);
-
- rcu_assign_pointer(tn->child[i], n);
- }
-@@ -523,7 +511,7 @@ static void tnode_put_child_reorg(struct
- #define MAX_WORK 10
- static struct rt_trie_node *resize(struct trie *t, struct tnode *tn)
- {
-- int i;
-+ struct rt_trie_node *n = NULL;
- struct tnode *old_tn;
- int inflate_threshold_use;
- int halve_threshold_use;
-@@ -536,12 +524,11 @@ static struct rt_trie_node *resize(struc
- tn, inflate_threshold, halve_threshold);
-
- /* No children */
-- if (tn->empty_children == tnode_child_length(tn)) {
-- tnode_free_safe(tn);
-- return NULL;
-- }
-+ if (tn->empty_children > (tnode_child_length(tn) - 1))
-+ goto no_children;
-+
- /* One child */
-- if (tn->empty_children == tnode_child_length(tn) - 1)
-+ if (tn->empty_children == (tnode_child_length(tn) - 1))
- goto one_child;
- /*
- * Double as long as the resulting node has a number of
-@@ -607,11 +594,9 @@ static struct rt_trie_node *resize(struc
- *
- */
-
-- check_tnode(tn);
--
- /* Keep root node larger */
-
-- if (!node_parent((struct rt_trie_node *)tn)) {
-+ if (!node_parent(tn)) {
- inflate_threshold_use = inflate_threshold_root;
- halve_threshold_use = halve_threshold_root;
- } else {
-@@ -637,8 +622,6 @@ static struct rt_trie_node *resize(struc
- }
- }
-
-- check_tnode(tn);
--
- /* Return if at least one inflate is run */
- if (max_work != MAX_WORK)
- return (struct rt_trie_node *) tn;
-@@ -666,21 +649,16 @@ static struct rt_trie_node *resize(struc
-
-
- /* Only one child remains */
-- if (tn->empty_children == tnode_child_length(tn) - 1) {
-+ if (tn->empty_children == (tnode_child_length(tn) - 1)) {
-+ unsigned long i;
- one_child:
-- for (i = 0; i < tnode_child_length(tn); i++) {
-- struct rt_trie_node *n;
--
-- n = rtnl_dereference(tn->child[i]);
-- if (!n)
-- continue;
--
-- /* compress one level */
--
-- node_set_parent(n, NULL);
-- tnode_free_safe(tn);
-- return n;
-- }
-+ for (i = tnode_child_length(tn); !n && i;)
-+ n = tnode_get_child(tn, --i);
-+no_children:
-+ /* compress one level */
-+ node_set_parent(n, NULL);
-+ tnode_free_safe(tn);
-+ return n;
- }
- return (struct rt_trie_node *) tn;
- }
-@@ -760,8 +738,7 @@ static struct tnode *inflate(struct trie
-
- /* A leaf or an internal node with skipped bits */
-
-- if (IS_LEAF(node) || ((struct tnode *) node)->pos >
-- tn->pos + tn->bits - 1) {
-+ if (IS_LEAF(node) || (node->pos > (tn->pos + tn->bits - 1))) {
- put_child(tn,
- tkey_extract_bits(node->key, oldtnode->pos, oldtnode->bits + 1),
- node);
-@@ -958,11 +935,9 @@ fib_find_node(struct trie *t, u32 key)
- pos = 0;
- n = rcu_dereference_rtnl(t->trie);
-
-- while (n != NULL && NODE_TYPE(n) == T_TNODE) {
-+ while (n && IS_TNODE(n)) {
- tn = (struct tnode *) n;
-
-- check_tnode(tn);
--
- if (tkey_sub_equals(tn->key, pos, tn->pos-pos, key)) {
- pos = tn->pos + tn->bits;
- n = tnode_get_child_rcu(tn,
-@@ -988,7 +963,7 @@ static void trie_rebalance(struct trie *
-
- key = tn->key;
-
-- while (tn != NULL && (tp = node_parent((struct rt_trie_node *)tn)) != NULL) {
-+ while (tn != NULL && (tp = node_parent(tn)) != NULL) {
- cindex = tkey_extract_bits(key, tp->pos, tp->bits);
- wasfull = tnode_full(tp, tnode_get_child(tp, cindex));
- tn = (struct tnode *)resize(t, tn);
-@@ -996,7 +971,7 @@ static void trie_rebalance(struct trie *
- tnode_put_child_reorg(tp, cindex,
- (struct rt_trie_node *)tn, wasfull);
-
-- tp = node_parent((struct rt_trie_node *) tn);
-+ tp = node_parent(tn);
- if (!tp)
- rcu_assign_pointer(t->trie, (struct rt_trie_node *)tn);
-
-@@ -1048,11 +1023,9 @@ static struct list_head *fib_insert_node
- * If it doesn't, we need to replace it with a T_TNODE.
- */
-
-- while (n != NULL && NODE_TYPE(n) == T_TNODE) {
-+ while (n && IS_TNODE(n)) {
- tn = (struct tnode *) n;
-
-- check_tnode(tn);
--
- if (tkey_sub_equals(tn->key, pos, tn->pos-pos, key)) {
- tp = tn;
- pos = tn->pos + tn->bits;
-@@ -1087,12 +1060,11 @@ static struct list_head *fib_insert_node
- insert_leaf_info(&l->list, li);
- goto done;
- }
-- l = leaf_new();
-+ l = leaf_new(key);
-
- if (!l)
- return NULL;
-
-- l->key = key;
- li = leaf_info_new(plen);
-
- if (!li) {
-@@ -1569,7 +1541,7 @@ backtrace:
- if (chopped_off <= pn->bits) {
- cindex &= ~(1 << (chopped_off-1));
- } else {
-- struct tnode *parent = node_parent_rcu((struct rt_trie_node *) pn);
-+ struct tnode *parent = node_parent_rcu(pn);
- if (!parent)
- goto failed;
-
-@@ -1597,7 +1569,7 @@ EXPORT_SYMBOL_GPL(fib_table_lookup);
- */
- static void trie_leaf_remove(struct trie *t, struct leaf *l)
- {
-- struct tnode *tp = node_parent((struct rt_trie_node *) l);
-+ struct tnode *tp = node_parent(l);
-
- pr_debug("entering trie_leaf_remove(%p)\n", l);
-
-@@ -2374,7 +2346,7 @@ static int fib_trie_seq_show(struct seq_
-
- if (IS_TNODE(n)) {
- struct tnode *tn = (struct tnode *) n;
-- __be32 prf = htonl(mask_pfx(tn->key, tn->pos));
-+ __be32 prf = htonl(tn->key);
-
- seq_indent(seq, iter->depth-1);
- seq_printf(seq, " +-- %pI4/%d %d %d %d\n",
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Wed, 31 Dec 2014 10:55:41 -0800
-Subject: [PATCH] fib_trie: Merge tnode_free and leaf_free into node_free
-
-Both the leaf and the tnode had an rcu_head in them, but they had them in
-slightly different places. Since we now have them in the same spot and
-know that any node with bits == 0 is a leaf and the rest are either vmalloc
-or kmalloc tnodes depending on the value of bits it makes it easy to combine
-the functions and reduce overhead.
-
-In addition I have taken advantage of the rcu_head pointer to go ahead and
-put together a simple linked list instead of using the tnode pointer as
-this way we can merge either type of structure for freeing.
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -95,15 +95,17 @@ struct tnode {
- unsigned char bits; /* 2log(KEYLENGTH) bits needed */
- unsigned char pos; /* 2log(KEYLENGTH) bits needed */
- struct tnode __rcu *parent;
-- union {
-- struct rcu_head rcu;
-- struct tnode *tnode_free;
-- };
-+ struct rcu_head rcu;
-+ /* everything above this comment must be the same as rt_trie_node */
- unsigned int full_children; /* KEYLENGTH bits needed */
- unsigned int empty_children; /* KEYLENGTH bits needed */
- struct rt_trie_node __rcu *child[0];
- };
-
-+/* This struct represents the shared bits between tnode and leaf. If any
-+ * ordering is changed here is must also be updated in tnode and leaf as
-+ * well.
-+ */
- struct rt_trie_node {
- t_key key;
- unsigned char bits;
-@@ -118,6 +120,7 @@ struct leaf {
- unsigned char pos;
- struct tnode __rcu *parent;
- struct rcu_head rcu;
-+ /* everything above this comment must be the same as rt_trie_node */
- struct hlist_head list;
- };
-
-@@ -163,7 +166,7 @@ static struct rt_trie_node *resize(struc
- static struct tnode *inflate(struct trie *t, struct tnode *tn);
- static struct tnode *halve(struct trie *t, struct tnode *tn);
- /* tnodes to free after resize(); protected by RTNL */
--static struct tnode *tnode_free_head;
-+static struct callback_head *tnode_free_head;
- static size_t tnode_free_size;
-
- /*
-@@ -336,17 +339,23 @@ static inline void alias_free_mem_rcu(st
- call_rcu(&fa->rcu, __alias_free_mem);
- }
-
--static void __leaf_free_rcu(struct rcu_head *head)
--{
-- struct leaf *l = container_of(head, struct leaf, rcu);
-- kmem_cache_free(trie_leaf_kmem, l);
--}
-+#define TNODE_KMALLOC_MAX \
-+ ilog2((PAGE_SIZE - sizeof(struct tnode)) / sizeof(struct rt_trie_node *))
-
--static inline void free_leaf(struct leaf *l)
-+static void __node_free_rcu(struct rcu_head *head)
- {
-- call_rcu(&l->rcu, __leaf_free_rcu);
-+ struct rt_trie_node *n = container_of(head, struct rt_trie_node, rcu);
-+
-+ if (IS_LEAF(n))
-+ kmem_cache_free(trie_leaf_kmem, n);
-+ else if (n->bits <= TNODE_KMALLOC_MAX)
-+ kfree(n);
-+ else
-+ vfree(n);
- }
-
-+#define node_free(n) call_rcu(&n->rcu, __node_free_rcu)
-+
- static inline void free_leaf_info(struct leaf_info *leaf)
- {
- kfree_rcu(leaf, rcu);
-@@ -360,43 +369,24 @@ static struct tnode *tnode_alloc(size_t
- return vzalloc(size);
- }
-
--static void __tnode_free_rcu(struct rcu_head *head)
--{
-- struct tnode *tn = container_of(head, struct tnode, rcu);
-- size_t size = sizeof(struct tnode) +
-- (sizeof(struct rt_trie_node *) << tn->bits);
--
-- if (size <= PAGE_SIZE)
-- kfree(tn);
-- else
-- vfree(tn);
--}
--
--static inline void tnode_free(struct tnode *tn)
--{
-- if (IS_LEAF(tn))
-- free_leaf((struct leaf *) tn);
-- else
-- call_rcu(&tn->rcu, __tnode_free_rcu);
--}
--
- static void tnode_free_safe(struct tnode *tn)
- {
- BUG_ON(IS_LEAF(tn));
-- tn->tnode_free = tnode_free_head;
-- tnode_free_head = tn;
-- tnode_free_size += sizeof(struct tnode) +
-- (sizeof(struct rt_trie_node *) << tn->bits);
-+ tn->rcu.next = tnode_free_head;
-+ tnode_free_head = &tn->rcu;
- }
-
- static void tnode_free_flush(void)
- {
-- struct tnode *tn;
-+ struct callback_head *head;
-+
-+ while ((head = tnode_free_head)) {
-+ struct tnode *tn = container_of(head, struct tnode, rcu);
-+
-+ tnode_free_head = head->next;
-+ tnode_free_size += offsetof(struct tnode, child[1 << tn->bits]);
-
-- while ((tn = tnode_free_head)) {
-- tnode_free_head = tn->tnode_free;
-- tn->tnode_free = NULL;
-- tnode_free(tn);
-+ node_free(tn);
- }
-
- if (tnode_free_size >= PAGE_SIZE * sync_pages) {
-@@ -437,7 +427,7 @@ static struct leaf_info *leaf_info_new(i
-
- static struct tnode *tnode_new(t_key key, int pos, int bits)
- {
-- size_t sz = sizeof(struct tnode) + (sizeof(struct rt_trie_node *) << bits);
-+ size_t sz = offsetof(struct tnode, child[1 << bits]);
- struct tnode *tn = tnode_alloc(sz);
- unsigned int shift = pos + bits;
-
-@@ -666,15 +656,15 @@ no_children:
-
- static void tnode_clean_free(struct tnode *tn)
- {
-+ struct rt_trie_node *tofree;
- int i;
-- struct tnode *tofree;
-
- for (i = 0; i < tnode_child_length(tn); i++) {
-- tofree = (struct tnode *)rtnl_dereference(tn->child[i]);
-+ tofree = rtnl_dereference(tn->child[i]);
- if (tofree)
-- tnode_free(tofree);
-+ node_free(tofree);
- }
-- tnode_free(tn);
-+ node_free(tn);
- }
-
- static struct tnode *inflate(struct trie *t, struct tnode *tn)
-@@ -717,7 +707,7 @@ static struct tnode *inflate(struct trie
- inode->bits - 1);
-
- if (!right) {
-- tnode_free(left);
-+ node_free(left);
- goto nomem;
- }
-
-@@ -1068,7 +1058,7 @@ static struct list_head *fib_insert_node
- li = leaf_info_new(plen);
-
- if (!li) {
-- free_leaf(l);
-+ node_free(l);
- return NULL;
- }
-
-@@ -1100,7 +1090,7 @@ static struct list_head *fib_insert_node
-
- if (!tn) {
- free_leaf_info(li);
-- free_leaf(l);
-+ node_free(l);
- return NULL;
- }
-
-@@ -1580,7 +1570,7 @@ static void trie_leaf_remove(struct trie
- } else
- RCU_INIT_POINTER(t->trie, NULL);
-
-- free_leaf(l);
-+ node_free(l);
- }
-
- /*
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Wed, 31 Dec 2014 10:55:47 -0800
-Subject: [PATCH] fib_trie: Merge leaf into tnode
-
-This change makes it so that leaf and tnode are the same struct. As a
-result there is no need for rt_trie_node anymore since everyting can be
-merged into tnode.
-
-On 32b systems this results in the leaf being 4 bytes larger, however I
-don't know if that is really an issue as this and an eariler patch that
-added bits & pos have increased the size from 20 to 28. If I am not
-mistaken slub/slab allocate on power of 2 sizes so 20 was likely being
-rounded up to 32 anyway.
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -96,32 +96,16 @@ struct tnode {
- unsigned char pos; /* 2log(KEYLENGTH) bits needed */
- struct tnode __rcu *parent;
- struct rcu_head rcu;
-- /* everything above this comment must be the same as rt_trie_node */
-- unsigned int full_children; /* KEYLENGTH bits needed */
-- unsigned int empty_children; /* KEYLENGTH bits needed */
-- struct rt_trie_node __rcu *child[0];
--};
--
--/* This struct represents the shared bits between tnode and leaf. If any
-- * ordering is changed here is must also be updated in tnode and leaf as
-- * well.
-- */
--struct rt_trie_node {
-- t_key key;
-- unsigned char bits;
-- unsigned char pos;
-- struct tnode __rcu *parent;
-- struct rcu_head rcu;
--};
--
--struct leaf {
-- t_key key;
-- unsigned char bits;
-- unsigned char pos;
-- struct tnode __rcu *parent;
-- struct rcu_head rcu;
-- /* everything above this comment must be the same as rt_trie_node */
-- struct hlist_head list;
-+ union {
-+ /* The fields in this struct are valid if bits > 0 (TNODE) */
-+ struct {
-+ unsigned int full_children; /* KEYLENGTH bits needed */
-+ unsigned int empty_children; /* KEYLENGTH bits needed */
-+ struct tnode __rcu *child[0];
-+ };
-+ /* This list pointer if valid if bits == 0 (LEAF) */
-+ struct hlist_head list;
-+ };
- };
-
- struct leaf_info {
-@@ -154,15 +138,15 @@ struct trie_stat {
- };
-
- struct trie {
-- struct rt_trie_node __rcu *trie;
-+ struct tnode __rcu *trie;
- #ifdef CONFIG_IP_FIB_TRIE_STATS
- struct trie_use_stats __percpu *stats;
- #endif
- };
-
--static void tnode_put_child_reorg(struct tnode *tn, int i, struct rt_trie_node *n,
-+static void tnode_put_child_reorg(struct tnode *tn, int i, struct tnode *n,
- int wasfull);
--static struct rt_trie_node *resize(struct trie *t, struct tnode *tn);
-+static struct tnode *resize(struct trie *t, struct tnode *tn);
- static struct tnode *inflate(struct trie *t, struct tnode *tn);
- static struct tnode *halve(struct trie *t, struct tnode *tn);
- /* tnodes to free after resize(); protected by RTNL */
-@@ -186,10 +170,10 @@ static struct kmem_cache *trie_leaf_kmem
- #define node_parent_rcu(n) rcu_dereference_rtnl((n)->parent)
-
- /* wrapper for rcu_assign_pointer */
--static inline void node_set_parent(struct rt_trie_node *node, struct tnode *ptr)
-+static inline void node_set_parent(struct tnode *n, struct tnode *tp)
- {
-- if (node)
-- rcu_assign_pointer(node->parent, ptr);
-+ if (n)
-+ rcu_assign_pointer(n->parent, tp);
- }
-
- #define NODE_INIT_PARENT(n, p) RCU_INIT_POINTER((n)->parent, p)
-@@ -205,7 +189,7 @@ static inline int tnode_child_length(con
- /*
- * caller must hold RTNL
- */
--static inline struct rt_trie_node *tnode_get_child(const struct tnode *tn, unsigned int i)
-+static inline struct tnode *tnode_get_child(const struct tnode *tn, unsigned int i)
- {
- BUG_ON(i >= tnode_child_length(tn));
-
-@@ -215,7 +199,7 @@ static inline struct rt_trie_node *tnode
- /*
- * caller must hold RCU read lock or RTNL
- */
--static inline struct rt_trie_node *tnode_get_child_rcu(const struct tnode *tn, unsigned int i)
-+static inline struct tnode *tnode_get_child_rcu(const struct tnode *tn, unsigned int i)
- {
- BUG_ON(i >= tnode_child_length(tn));
-
-@@ -340,11 +324,11 @@ static inline void alias_free_mem_rcu(st
- }
-
- #define TNODE_KMALLOC_MAX \
-- ilog2((PAGE_SIZE - sizeof(struct tnode)) / sizeof(struct rt_trie_node *))
-+ ilog2((PAGE_SIZE - sizeof(struct tnode)) / sizeof(struct tnode *))
-
- static void __node_free_rcu(struct rcu_head *head)
- {
-- struct rt_trie_node *n = container_of(head, struct rt_trie_node, rcu);
-+ struct tnode *n = container_of(head, struct tnode, rcu);
-
- if (IS_LEAF(n))
- kmem_cache_free(trie_leaf_kmem, n);
-@@ -395,9 +379,9 @@ static void tnode_free_flush(void)
- }
- }
-
--static struct leaf *leaf_new(t_key key)
-+static struct tnode *leaf_new(t_key key)
- {
-- struct leaf *l = kmem_cache_alloc(trie_leaf_kmem, GFP_KERNEL);
-+ struct tnode *l = kmem_cache_alloc(trie_leaf_kmem, GFP_KERNEL);
- if (l) {
- l->parent = NULL;
- /* set key and pos to reflect full key value
-@@ -444,7 +428,7 @@ static struct tnode *tnode_new(t_key key
- }
-
- pr_debug("AT %p s=%zu %zu\n", tn, sizeof(struct tnode),
-- sizeof(struct rt_trie_node *) << bits);
-+ sizeof(struct tnode *) << bits);
- return tn;
- }
-
-@@ -453,13 +437,13 @@ static struct tnode *tnode_new(t_key key
- * and no bits are skipped. See discussion in dyntree paper p. 6
- */
-
--static inline int tnode_full(const struct tnode *tn, const struct rt_trie_node *n)
-+static inline int tnode_full(const struct tnode *tn, const struct tnode *n)
- {
- return n && IS_TNODE(n) && (n->pos == (tn->pos + tn->bits));
- }
-
- static inline void put_child(struct tnode *tn, int i,
-- struct rt_trie_node *n)
-+ struct tnode *n)
- {
- tnode_put_child_reorg(tn, i, n, -1);
- }
-@@ -469,10 +453,10 @@ static inline void put_child(struct tnod
- * Update the value of full_children and empty_children.
- */
-
--static void tnode_put_child_reorg(struct tnode *tn, int i, struct rt_trie_node *n,
-+static void tnode_put_child_reorg(struct tnode *tn, int i, struct tnode *n,
- int wasfull)
- {
-- struct rt_trie_node *chi = rtnl_dereference(tn->child[i]);
-+ struct tnode *chi = rtnl_dereference(tn->child[i]);
- int isfull;
-
- BUG_ON(i >= 1<<tn->bits);
-@@ -499,10 +483,9 @@ static void tnode_put_child_reorg(struct
- }
-
- #define MAX_WORK 10
--static struct rt_trie_node *resize(struct trie *t, struct tnode *tn)
-+static struct tnode *resize(struct trie *t, struct tnode *tn)
- {
-- struct rt_trie_node *n = NULL;
-- struct tnode *old_tn;
-+ struct tnode *old_tn, *n = NULL;
- int inflate_threshold_use;
- int halve_threshold_use;
- int max_work;
-@@ -614,7 +597,7 @@ static struct rt_trie_node *resize(struc
-
- /* Return if at least one inflate is run */
- if (max_work != MAX_WORK)
-- return (struct rt_trie_node *) tn;
-+ return tn;
-
- /*
- * Halve as long as the number of empty children in this
-@@ -650,13 +633,13 @@ no_children:
- tnode_free_safe(tn);
- return n;
- }
-- return (struct rt_trie_node *) tn;
-+ return tn;
- }
-
-
- static void tnode_clean_free(struct tnode *tn)
- {
-- struct rt_trie_node *tofree;
-+ struct tnode *tofree;
- int i;
-
- for (i = 0; i < tnode_child_length(tn); i++) {
-@@ -667,10 +650,10 @@ static void tnode_clean_free(struct tnod
- node_free(tn);
- }
-
--static struct tnode *inflate(struct trie *t, struct tnode *tn)
-+static struct tnode *inflate(struct trie *t, struct tnode *oldtnode)
- {
-- struct tnode *oldtnode = tn;
-- int olen = tnode_child_length(tn);
-+ int olen = tnode_child_length(oldtnode);
-+ struct tnode *tn;
- int i;
-
- pr_debug("In inflate\n");
-@@ -690,11 +673,8 @@ static struct tnode *inflate(struct trie
- for (i = 0; i < olen; i++) {
- struct tnode *inode;
-
-- inode = (struct tnode *) tnode_get_child(oldtnode, i);
-- if (inode &&
-- IS_TNODE(inode) &&
-- inode->pos == oldtnode->pos + oldtnode->bits &&
-- inode->bits > 1) {
-+ inode = tnode_get_child(oldtnode, i);
-+ if (tnode_full(oldtnode, inode) && inode->bits > 1) {
- struct tnode *left, *right;
- t_key m = ~0U << (KEYLENGTH - 1) >> inode->pos;
-
-@@ -711,33 +691,29 @@ static struct tnode *inflate(struct trie
- goto nomem;
- }
-
-- put_child(tn, 2*i, (struct rt_trie_node *) left);
-- put_child(tn, 2*i+1, (struct rt_trie_node *) right);
-+ put_child(tn, 2*i, left);
-+ put_child(tn, 2*i+1, right);
- }
- }
-
- for (i = 0; i < olen; i++) {
-- struct tnode *inode;
-- struct rt_trie_node *node = tnode_get_child(oldtnode, i);
-+ struct tnode *inode = tnode_get_child(oldtnode, i);
- struct tnode *left, *right;
- int size, j;
-
- /* An empty child */
-- if (node == NULL)
-+ if (inode == NULL)
- continue;
-
- /* A leaf or an internal node with skipped bits */
--
-- if (IS_LEAF(node) || (node->pos > (tn->pos + tn->bits - 1))) {
-+ if (!tnode_full(oldtnode, inode)) {
- put_child(tn,
-- tkey_extract_bits(node->key, oldtnode->pos, oldtnode->bits + 1),
-- node);
-+ tkey_extract_bits(inode->key, tn->pos, tn->bits),
-+ inode);
- continue;
- }
-
- /* An internal node with two children */
-- inode = (struct tnode *) node;
--
- if (inode->bits == 1) {
- put_child(tn, 2*i, rtnl_dereference(inode->child[0]));
- put_child(tn, 2*i+1, rtnl_dereference(inode->child[1]));
-@@ -769,12 +745,12 @@ static struct tnode *inflate(struct trie
- * bit to zero.
- */
-
-- left = (struct tnode *) tnode_get_child(tn, 2*i);
-+ left = tnode_get_child(tn, 2*i);
- put_child(tn, 2*i, NULL);
-
- BUG_ON(!left);
-
-- right = (struct tnode *) tnode_get_child(tn, 2*i+1);
-+ right = tnode_get_child(tn, 2*i+1);
- put_child(tn, 2*i+1, NULL);
-
- BUG_ON(!right);
-@@ -796,12 +772,11 @@ nomem:
- return ERR_PTR(-ENOMEM);
- }
-
--static struct tnode *halve(struct trie *t, struct tnode *tn)
-+static struct tnode *halve(struct trie *t, struct tnode *oldtnode)
- {
-- struct tnode *oldtnode = tn;
-- struct rt_trie_node *left, *right;
-+ int olen = tnode_child_length(oldtnode);
-+ struct tnode *tn, *left, *right;
- int i;
-- int olen = tnode_child_length(tn);
-
- pr_debug("In halve\n");
-
-@@ -830,7 +805,7 @@ static struct tnode *halve(struct trie *
- if (!newn)
- goto nomem;
-
-- put_child(tn, i/2, (struct rt_trie_node *)newn);
-+ put_child(tn, i/2, newn);
- }
-
- }
-@@ -855,7 +830,7 @@ static struct tnode *halve(struct trie *
- }
-
- /* Two nonempty children */
-- newBinNode = (struct tnode *) tnode_get_child(tn, i/2);
-+ newBinNode = tnode_get_child(tn, i/2);
- put_child(tn, i/2, NULL);
- put_child(newBinNode, 0, left);
- put_child(newBinNode, 1, right);
-@@ -871,7 +846,7 @@ nomem:
- /* readside must use rcu_read_lock currently dump routines
- via get_fa_head and dump */
-
--static struct leaf_info *find_leaf_info(struct leaf *l, int plen)
-+static struct leaf_info *find_leaf_info(struct tnode *l, int plen)
- {
- struct hlist_head *head = &l->list;
- struct leaf_info *li;
-@@ -883,7 +858,7 @@ static struct leaf_info *find_leaf_info(
- return NULL;
- }
-
--static inline struct list_head *get_fa_head(struct leaf *l, int plen)
-+static inline struct list_head *get_fa_head(struct tnode *l, int plen)
- {
- struct leaf_info *li = find_leaf_info(l, plen);
-
-@@ -915,32 +890,25 @@ static void insert_leaf_info(struct hlis
-
- /* rcu_read_lock needs to be hold by caller from readside */
-
--static struct leaf *
--fib_find_node(struct trie *t, u32 key)
-+static struct tnode *fib_find_node(struct trie *t, u32 key)
- {
-- int pos;
-- struct tnode *tn;
-- struct rt_trie_node *n;
--
-- pos = 0;
-- n = rcu_dereference_rtnl(t->trie);
-+ struct tnode *n = rcu_dereference_rtnl(t->trie);
-+ int pos = 0;
-
- while (n && IS_TNODE(n)) {
-- tn = (struct tnode *) n;
--
-- if (tkey_sub_equals(tn->key, pos, tn->pos-pos, key)) {
-- pos = tn->pos + tn->bits;
-- n = tnode_get_child_rcu(tn,
-+ if (tkey_sub_equals(n->key, pos, n->pos-pos, key)) {
-+ pos = n->pos + n->bits;
-+ n = tnode_get_child_rcu(n,
- tkey_extract_bits(key,
-- tn->pos,
-- tn->bits));
-+ n->pos,
-+ n->bits));
- } else
- break;
- }
- /* Case we have found a leaf. Compare prefixes */
-
- if (n != NULL && IS_LEAF(n) && tkey_equals(key, n->key))
-- return (struct leaf *)n;
-+ return n;
-
- return NULL;
- }
-@@ -956,14 +924,13 @@ static void trie_rebalance(struct trie *
- while (tn != NULL && (tp = node_parent(tn)) != NULL) {
- cindex = tkey_extract_bits(key, tp->pos, tp->bits);
- wasfull = tnode_full(tp, tnode_get_child(tp, cindex));
-- tn = (struct tnode *)resize(t, tn);
-+ tn = resize(t, tn);
-
-- tnode_put_child_reorg(tp, cindex,
-- (struct rt_trie_node *)tn, wasfull);
-+ tnode_put_child_reorg(tp, cindex, tn, wasfull);
-
- tp = node_parent(tn);
- if (!tp)
-- rcu_assign_pointer(t->trie, (struct rt_trie_node *)tn);
-+ rcu_assign_pointer(t->trie, tn);
-
- tnode_free_flush();
- if (!tp)
-@@ -973,9 +940,9 @@ static void trie_rebalance(struct trie *
-
- /* Handle last (top) tnode */
- if (IS_TNODE(tn))
-- tn = (struct tnode *)resize(t, tn);
-+ tn = resize(t, tn);
-
-- rcu_assign_pointer(t->trie, (struct rt_trie_node *)tn);
-+ rcu_assign_pointer(t->trie, tn);
- tnode_free_flush();
- }
-
-@@ -985,8 +952,8 @@ static struct list_head *fib_insert_node
- {
- int pos, newpos;
- struct tnode *tp = NULL, *tn = NULL;
-- struct rt_trie_node *n;
-- struct leaf *l;
-+ struct tnode *n;
-+ struct tnode *l;
- int missbit;
- struct list_head *fa_head = NULL;
- struct leaf_info *li;
-@@ -1014,17 +981,15 @@ static struct list_head *fib_insert_node
- */
-
- while (n && IS_TNODE(n)) {
-- tn = (struct tnode *) n;
--
-- if (tkey_sub_equals(tn->key, pos, tn->pos-pos, key)) {
-- tp = tn;
-- pos = tn->pos + tn->bits;
-- n = tnode_get_child(tn,
-+ if (tkey_sub_equals(n->key, pos, n->pos-pos, key)) {
-+ tp = n;
-+ pos = n->pos + n->bits;
-+ n = tnode_get_child(n,
- tkey_extract_bits(key,
-- tn->pos,
-- tn->bits));
-+ n->pos,
-+ n->bits));
-
-- BUG_ON(n && node_parent(n) != tn);
-+ BUG_ON(n && node_parent(n) != tp);
- } else
- break;
- }
-@@ -1040,14 +1005,13 @@ static struct list_head *fib_insert_node
- /* Case 1: n is a leaf. Compare prefixes */
-
- if (n != NULL && IS_LEAF(n) && tkey_equals(key, n->key)) {
-- l = (struct leaf *) n;
- li = leaf_info_new(plen);
-
- if (!li)
- return NULL;
-
- fa_head = &li->falh;
-- insert_leaf_info(&l->list, li);
-+ insert_leaf_info(&n->list, li);
- goto done;
- }
- l = leaf_new(key);
-@@ -1068,10 +1032,10 @@ static struct list_head *fib_insert_node
- if (t->trie && n == NULL) {
- /* Case 2: n is NULL, and will just insert a new leaf */
-
-- node_set_parent((struct rt_trie_node *)l, tp);
-+ node_set_parent(l, tp);
-
- cindex = tkey_extract_bits(key, tp->pos, tp->bits);
-- put_child(tp, cindex, (struct rt_trie_node *)l);
-+ put_child(tp, cindex, l);
- } else {
- /* Case 3: n is a LEAF or a TNODE and the key doesn't match. */
- /*
-@@ -1094,17 +1058,17 @@ static struct list_head *fib_insert_node
- return NULL;
- }
-
-- node_set_parent((struct rt_trie_node *)tn, tp);
-+ node_set_parent(tn, tp);
-
- missbit = tkey_extract_bits(key, newpos, 1);
-- put_child(tn, missbit, (struct rt_trie_node *)l);
-+ put_child(tn, missbit, l);
- put_child(tn, 1-missbit, n);
-
- if (tp) {
- cindex = tkey_extract_bits(key, tp->pos, tp->bits);
-- put_child(tp, cindex, (struct rt_trie_node *)tn);
-+ put_child(tp, cindex, tn);
- } else {
-- rcu_assign_pointer(t->trie, (struct rt_trie_node *)tn);
-+ rcu_assign_pointer(t->trie, tn);
- }
-
- tp = tn;
-@@ -1134,7 +1098,7 @@ int fib_table_insert(struct fib_table *t
- u8 tos = cfg->fc_tos;
- u32 key, mask;
- int err;
-- struct leaf *l;
-+ struct tnode *l;
-
- if (plen > 32)
- return -EINVAL;
-@@ -1292,7 +1256,7 @@ err:
- }
-
- /* should be called with rcu_read_lock */
--static int check_leaf(struct fib_table *tb, struct trie *t, struct leaf *l,
-+static int check_leaf(struct fib_table *tb, struct trie *t, struct tnode *l,
- t_key key, const struct flowi4 *flp,
- struct fib_result *res, int fib_flags)
- {
-@@ -1365,7 +1329,7 @@ int fib_table_lookup(struct fib_table *t
- struct trie_use_stats __percpu *stats = t->stats;
- #endif
- int ret;
-- struct rt_trie_node *n;
-+ struct tnode *n;
- struct tnode *pn;
- unsigned int pos, bits;
- t_key key = ntohl(flp->daddr);
-@@ -1387,11 +1351,11 @@ int fib_table_lookup(struct fib_table *t
-
- /* Just a leaf? */
- if (IS_LEAF(n)) {
-- ret = check_leaf(tb, t, (struct leaf *)n, key, flp, res, fib_flags);
-+ ret = check_leaf(tb, t, n, key, flp, res, fib_flags);
- goto found;
- }
-
-- pn = (struct tnode *) n;
-+ pn = n;
- chopped_off = 0;
-
- while (pn) {
-@@ -1412,13 +1376,13 @@ int fib_table_lookup(struct fib_table *t
- }
-
- if (IS_LEAF(n)) {
-- ret = check_leaf(tb, t, (struct leaf *)n, key, flp, res, fib_flags);
-+ ret = check_leaf(tb, t, n, key, flp, res, fib_flags);
- if (ret > 0)
- goto backtrace;
- goto found;
- }
-
-- cn = (struct tnode *)n;
-+ cn = n;
-
- /*
- * It's a tnode, and we can do some extra checks here if we
-@@ -1506,7 +1470,7 @@ int fib_table_lookup(struct fib_table *t
- current_prefix_length = mp;
- }
-
-- pn = (struct tnode *)n; /* Descend */
-+ pn = n; /* Descend */
- chopped_off = 0;
- continue;
-
-@@ -1557,7 +1521,7 @@ EXPORT_SYMBOL_GPL(fib_table_lookup);
- /*
- * Remove the leaf and return parent.
- */
--static void trie_leaf_remove(struct trie *t, struct leaf *l)
-+static void trie_leaf_remove(struct trie *t, struct tnode *l)
- {
- struct tnode *tp = node_parent(l);
-
-@@ -1584,7 +1548,7 @@ int fib_table_delete(struct fib_table *t
- u8 tos = cfg->fc_tos;
- struct fib_alias *fa, *fa_to_delete;
- struct list_head *fa_head;
-- struct leaf *l;
-+ struct tnode *l;
- struct leaf_info *li;
-
- if (plen > 32)
-@@ -1682,7 +1646,7 @@ static int trie_flush_list(struct list_h
- return found;
- }
-
--static int trie_flush_leaf(struct leaf *l)
-+static int trie_flush_leaf(struct tnode *l)
- {
- int found = 0;
- struct hlist_head *lih = &l->list;
-@@ -1704,7 +1668,7 @@ static int trie_flush_leaf(struct leaf *
- * Scan for the next right leaf starting at node p->child[idx]
- * Since we have back pointer, no recursion necessary.
- */
--static struct leaf *leaf_walk_rcu(struct tnode *p, struct rt_trie_node *c)
-+static struct tnode *leaf_walk_rcu(struct tnode *p, struct tnode *c)
- {
- do {
- t_key idx;
-@@ -1720,47 +1684,46 @@ static struct leaf *leaf_walk_rcu(struct
- continue;
-
- if (IS_LEAF(c))
-- return (struct leaf *) c;
-+ return c;
-
- /* Rescan start scanning in new node */
-- p = (struct tnode *) c;
-+ p = c;
- idx = 0;
- }
-
- /* Node empty, walk back up to parent */
-- c = (struct rt_trie_node *) p;
-+ c = p;
- } while ((p = node_parent_rcu(c)) != NULL);
-
- return NULL; /* Root of trie */
- }
-
--static struct leaf *trie_firstleaf(struct trie *t)
-+static struct tnode *trie_firstleaf(struct trie *t)
- {
-- struct tnode *n = (struct tnode *)rcu_dereference_rtnl(t->trie);
-+ struct tnode *n = rcu_dereference_rtnl(t->trie);
-
- if (!n)
- return NULL;
-
- if (IS_LEAF(n)) /* trie is just a leaf */
-- return (struct leaf *) n;
-+ return n;
-
- return leaf_walk_rcu(n, NULL);
- }
-
--static struct leaf *trie_nextleaf(struct leaf *l)
-+static struct tnode *trie_nextleaf(struct tnode *l)
- {
-- struct rt_trie_node *c = (struct rt_trie_node *) l;
-- struct tnode *p = node_parent_rcu(c);
-+ struct tnode *p = node_parent_rcu(l);
-
- if (!p)
- return NULL; /* trie with just one leaf */
-
-- return leaf_walk_rcu(p, c);
-+ return leaf_walk_rcu(p, l);
- }
-
--static struct leaf *trie_leafindex(struct trie *t, int index)
-+static struct tnode *trie_leafindex(struct trie *t, int index)
- {
-- struct leaf *l = trie_firstleaf(t);
-+ struct tnode *l = trie_firstleaf(t);
-
- while (l && index-- > 0)
- l = trie_nextleaf(l);
-@@ -1775,7 +1738,7 @@ static struct leaf *trie_leafindex(struc
- int fib_table_flush(struct fib_table *tb)
- {
- struct trie *t = (struct trie *) tb->tb_data;
-- struct leaf *l, *ll = NULL;
-+ struct tnode *l, *ll = NULL;
- int found = 0;
-
- for (l = trie_firstleaf(t); l; l = trie_nextleaf(l)) {
-@@ -1840,7 +1803,7 @@ static int fn_trie_dump_fa(t_key key, in
- return skb->len;
- }
-
--static int fn_trie_dump_leaf(struct leaf *l, struct fib_table *tb,
-+static int fn_trie_dump_leaf(struct tnode *l, struct fib_table *tb,
- struct sk_buff *skb, struct netlink_callback *cb)
- {
- struct leaf_info *li;
-@@ -1876,7 +1839,7 @@ static int fn_trie_dump_leaf(struct leaf
- int fib_table_dump(struct fib_table *tb, struct sk_buff *skb,
- struct netlink_callback *cb)
- {
-- struct leaf *l;
-+ struct tnode *l;
- struct trie *t = (struct trie *) tb->tb_data;
- t_key key = cb->args[2];
- int count = cb->args[3];
-@@ -1922,7 +1885,7 @@ void __init fib_trie_init(void)
- 0, SLAB_PANIC, NULL);
-
- trie_leaf_kmem = kmem_cache_create("ip_fib_trie",
-- max(sizeof(struct leaf),
-+ max(sizeof(struct tnode),
- sizeof(struct leaf_info)),
- 0, SLAB_PANIC, NULL);
- }
-@@ -1965,7 +1928,7 @@ struct fib_trie_iter {
- unsigned int depth;
- };
-
--static struct rt_trie_node *fib_trie_get_next(struct fib_trie_iter *iter)
-+static struct tnode *fib_trie_get_next(struct fib_trie_iter *iter)
- {
- struct tnode *tn = iter->tnode;
- unsigned int cindex = iter->index;
-@@ -1979,7 +1942,7 @@ static struct rt_trie_node *fib_trie_get
- iter->tnode, iter->index, iter->depth);
- rescan:
- while (cindex < (1<<tn->bits)) {
-- struct rt_trie_node *n = tnode_get_child_rcu(tn, cindex);
-+ struct tnode *n = tnode_get_child_rcu(tn, cindex);
-
- if (n) {
- if (IS_LEAF(n)) {
-@@ -1987,7 +1950,7 @@ rescan:
- iter->index = cindex + 1;
- } else {
- /* push down one level */
-- iter->tnode = (struct tnode *) n;
-+ iter->tnode = n;
- iter->index = 0;
- ++iter->depth;
- }
-@@ -1998,7 +1961,7 @@ rescan:
- }
-
- /* Current node exhausted, pop back up */
-- p = node_parent_rcu((struct rt_trie_node *)tn);
-+ p = node_parent_rcu(tn);
- if (p) {
- cindex = tkey_extract_bits(tn->key, p->pos, p->bits)+1;
- tn = p;
-@@ -2010,10 +1973,10 @@ rescan:
- return NULL;
- }
-
--static struct rt_trie_node *fib_trie_get_first(struct fib_trie_iter *iter,
-+static struct tnode *fib_trie_get_first(struct fib_trie_iter *iter,
- struct trie *t)
- {
-- struct rt_trie_node *n;
-+ struct tnode *n;
-
- if (!t)
- return NULL;
-@@ -2023,7 +1986,7 @@ static struct rt_trie_node *fib_trie_get
- return NULL;
-
- if (IS_TNODE(n)) {
-- iter->tnode = (struct tnode *) n;
-+ iter->tnode = n;
- iter->index = 0;
- iter->depth = 1;
- } else {
-@@ -2037,7 +2000,7 @@ static struct rt_trie_node *fib_trie_get
-
- static void trie_collect_stats(struct trie *t, struct trie_stat *s)
- {
-- struct rt_trie_node *n;
-+ struct tnode *n;
- struct fib_trie_iter iter;
-
- memset(s, 0, sizeof(*s));
-@@ -2045,7 +2008,6 @@ static void trie_collect_stats(struct tr
- rcu_read_lock();
- for (n = fib_trie_get_first(&iter, t); n; n = fib_trie_get_next(&iter)) {
- if (IS_LEAF(n)) {
-- struct leaf *l = (struct leaf *)n;
- struct leaf_info *li;
-
- s->leaves++;
-@@ -2053,18 +2015,17 @@ static void trie_collect_stats(struct tr
- if (iter.depth > s->maxdepth)
- s->maxdepth = iter.depth;
-
-- hlist_for_each_entry_rcu(li, &l->list, hlist)
-+ hlist_for_each_entry_rcu(li, &n->list, hlist)
- ++s->prefixes;
- } else {
-- const struct tnode *tn = (const struct tnode *) n;
- int i;
-
- s->tnodes++;
-- if (tn->bits < MAX_STAT_DEPTH)
-- s->nodesizes[tn->bits]++;
-+ if (n->bits < MAX_STAT_DEPTH)
-+ s->nodesizes[n->bits]++;
-
-- for (i = 0; i < (1<<tn->bits); i++)
-- if (!tn->child[i])
-+ for (i = 0; i < tnode_child_length(n); i++)
-+ if (!rcu_access_pointer(n->child[i]))
- s->nullpointers++;
- }
- }
-@@ -2088,7 +2049,7 @@ static void trie_show_stats(struct seq_f
- seq_printf(seq, "\tMax depth: %u\n", stat->maxdepth);
-
- seq_printf(seq, "\tLeaves: %u\n", stat->leaves);
-- bytes = sizeof(struct leaf) * stat->leaves;
-+ bytes = sizeof(struct tnode) * stat->leaves;
-
- seq_printf(seq, "\tPrefixes: %u\n", stat->prefixes);
- bytes += sizeof(struct leaf_info) * stat->prefixes;
-@@ -2109,7 +2070,7 @@ static void trie_show_stats(struct seq_f
- seq_putc(seq, '\n');
- seq_printf(seq, "\tPointers: %u\n", pointers);
-
-- bytes += sizeof(struct rt_trie_node *) * pointers;
-+ bytes += sizeof(struct tnode *) * pointers;
- seq_printf(seq, "Null ptrs: %u\n", stat->nullpointers);
- seq_printf(seq, "Total size: %u kB\n", (bytes + 1023) / 1024);
- }
-@@ -2163,7 +2124,7 @@ static int fib_triestat_seq_show(struct
- seq_printf(seq,
- "Basic info: size of leaf:"
- " %Zd bytes, size of tnode: %Zd bytes.\n",
-- sizeof(struct leaf), sizeof(struct tnode));
-+ sizeof(struct tnode), sizeof(struct tnode));
-
- for (h = 0; h < FIB_TABLE_HASHSZ; h++) {
- struct hlist_head *head = &net->ipv4.fib_table_hash[h];
-@@ -2202,7 +2163,7 @@ static const struct file_operations fib_
- .release = single_release_net,
- };
-
--static struct rt_trie_node *fib_trie_get_idx(struct seq_file *seq, loff_t pos)
-+static struct tnode *fib_trie_get_idx(struct seq_file *seq, loff_t pos)
- {
- struct fib_trie_iter *iter = seq->private;
- struct net *net = seq_file_net(seq);
-@@ -2214,7 +2175,7 @@ static struct rt_trie_node *fib_trie_get
- struct fib_table *tb;
-
- hlist_for_each_entry_rcu(tb, head, tb_hlist) {
-- struct rt_trie_node *n;
-+ struct tnode *n;
-
- for (n = fib_trie_get_first(iter,
- (struct trie *) tb->tb_data);
-@@ -2243,7 +2204,7 @@ static void *fib_trie_seq_next(struct se
- struct fib_table *tb = iter->tb;
- struct hlist_node *tb_node;
- unsigned int h;
-- struct rt_trie_node *n;
-+ struct tnode *n;
-
- ++*pos;
- /* next node in same table */
-@@ -2329,29 +2290,26 @@ static inline const char *rtn_type(char
- static int fib_trie_seq_show(struct seq_file *seq, void *v)
- {
- const struct fib_trie_iter *iter = seq->private;
-- struct rt_trie_node *n = v;
-+ struct tnode *n = v;
-
- if (!node_parent_rcu(n))
- fib_table_print(seq, iter->tb);
-
- if (IS_TNODE(n)) {
-- struct tnode *tn = (struct tnode *) n;
-- __be32 prf = htonl(tn->key);
-+ __be32 prf = htonl(n->key);
-
-- seq_indent(seq, iter->depth-1);
-+ seq_indent(seq, iter->depth - 1);
- seq_printf(seq, " +-- %pI4/%d %d %d %d\n",
-- &prf, tn->pos, tn->bits, tn->full_children,
-- tn->empty_children);
--
-+ &prf, n->pos, n->bits, n->full_children,
-+ n->empty_children);
- } else {
-- struct leaf *l = (struct leaf *) n;
- struct leaf_info *li;
-- __be32 val = htonl(l->key);
-+ __be32 val = htonl(n->key);
-
- seq_indent(seq, iter->depth);
- seq_printf(seq, " |-- %pI4\n", &val);
-
-- hlist_for_each_entry_rcu(li, &l->list, hlist) {
-+ hlist_for_each_entry_rcu(li, &n->list, hlist) {
- struct fib_alias *fa;
-
- list_for_each_entry_rcu(fa, &li->falh, fa_list) {
-@@ -2401,9 +2359,9 @@ struct fib_route_iter {
- t_key key;
- };
-
--static struct leaf *fib_route_get_idx(struct fib_route_iter *iter, loff_t pos)
-+static struct tnode *fib_route_get_idx(struct fib_route_iter *iter, loff_t pos)
- {
-- struct leaf *l = NULL;
-+ struct tnode *l = NULL;
- struct trie *t = iter->main_trie;
-
- /* use cache location of last found key */
-@@ -2448,7 +2406,7 @@ static void *fib_route_seq_start(struct
- static void *fib_route_seq_next(struct seq_file *seq, void *v, loff_t *pos)
- {
- struct fib_route_iter *iter = seq->private;
-- struct leaf *l = v;
-+ struct tnode *l = v;
-
- ++*pos;
- if (v == SEQ_START_TOKEN) {
-@@ -2494,7 +2452,7 @@ static unsigned int fib_flag_trans(int t
- */
- static int fib_route_seq_show(struct seq_file *seq, void *v)
- {
-- struct leaf *l = v;
-+ struct tnode *l = v;
- struct leaf_info *li;
-
- if (v == SEQ_START_TOKEN) {
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Wed, 31 Dec 2014 10:55:54 -0800
-Subject: [PATCH] fib_trie: Optimize fib_table_lookup to avoid wasting
- time on loops/variables
-
-This patch is meant to reduce the complexity of fib_table_lookup by reducing
-the number of variables to the bare minimum while still keeping the same if
-not improved functionality versus the original.
-
-Most of this change was started off by the desire to rid the function of
-chopped_off and current_prefix_length as they actually added very little to
-the function since they only applied when computing the cindex. I was able
-to replace them mostly with just a check for the prefix match. As long as
-the prefix between the key and the node being tested was the same we know
-we can search the tnode fully versus just testing cindex 0.
-
-The second portion of the change ended up being a massive reordering.
-Originally the calls to check_leaf were up near the start of the loop, and
-the backtracing and descending into lower levels of tnodes was later. This
-didn't make much sense as the structure of the tree means the leaves are
-always the last thing to be tested. As such I reordered things so that we
-instead have a loop that will delve into the tree and only exit when we
-have either found a leaf or we have exhausted the tree. The advantage of
-rearranging things like this is that we can fully inline check_leaf since
-there is now only one reference to it in the function.
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -90,6 +90,9 @@ typedef unsigned int t_key;
- #define IS_TNODE(n) ((n)->bits)
- #define IS_LEAF(n) (!(n)->bits)
-
-+#define get_shift(_kv) (KEYLENGTH - (_kv)->pos - (_kv)->bits)
-+#define get_index(_key, _kv) (((_key) ^ (_kv)->key) >> get_shift(_kv))
-+
- struct tnode {
- t_key key;
- unsigned char bits; /* 2log(KEYLENGTH) bits needed */
-@@ -1281,7 +1284,7 @@ static int check_leaf(struct fib_table *
- continue;
- fib_alias_accessed(fa);
- err = fib_props[fa->fa_type].error;
-- if (err) {
-+ if (unlikely(err < 0)) {
- #ifdef CONFIG_IP_FIB_TRIE_STATS
- this_cpu_inc(t->stats->semantic_match_passed);
- #endif
-@@ -1303,7 +1306,7 @@ static int check_leaf(struct fib_table *
- res->prefixlen = li->plen;
- res->nh_sel = nhsel;
- res->type = fa->fa_type;
-- res->scope = fa->fa_info->fib_scope;
-+ res->scope = fi->fib_scope;
- res->fi = fi;
- res->table = tb;
- res->fa_head = &li->falh;
-@@ -1321,23 +1324,24 @@ static int check_leaf(struct fib_table *
- return 1;
- }
-
-+static inline t_key prefix_mismatch(t_key key, struct tnode *n)
-+{
-+ t_key prefix = n->key;
-+
-+ return (key ^ prefix) & (prefix | -prefix);
-+}
-+
- int fib_table_lookup(struct fib_table *tb, const struct flowi4 *flp,
- struct fib_result *res, int fib_flags)
- {
-- struct trie *t = (struct trie *) tb->tb_data;
-+ struct trie *t = (struct trie *)tb->tb_data;
- #ifdef CONFIG_IP_FIB_TRIE_STATS
- struct trie_use_stats __percpu *stats = t->stats;
- #endif
-- int ret;
-- struct tnode *n;
-- struct tnode *pn;
-- unsigned int pos, bits;
-- t_key key = ntohl(flp->daddr);
-- unsigned int chopped_off;
-- t_key cindex = 0;
-- unsigned int current_prefix_length = KEYLENGTH;
-- struct tnode *cn;
-- t_key pref_mismatch;
-+ const t_key key = ntohl(flp->daddr);
-+ struct tnode *n, *pn;
-+ t_key cindex;
-+ int ret = 1;
-
- rcu_read_lock();
-
-@@ -1349,170 +1353,102 @@ int fib_table_lookup(struct fib_table *t
- this_cpu_inc(stats->gets);
- #endif
-
-- /* Just a leaf? */
-- if (IS_LEAF(n)) {
-- ret = check_leaf(tb, t, n, key, flp, res, fib_flags);
-- goto found;
-- }
--
- pn = n;
-- chopped_off = 0;
--
-- while (pn) {
-- pos = pn->pos;
-- bits = pn->bits;
-+ cindex = 0;
-
-- if (!chopped_off)
-- cindex = tkey_extract_bits(mask_pfx(key, current_prefix_length),
-- pos, bits);
--
-- n = tnode_get_child_rcu(pn, cindex);
--
-- if (n == NULL) {
--#ifdef CONFIG_IP_FIB_TRIE_STATS
-- this_cpu_inc(stats->null_node_hit);
--#endif
-- goto backtrace;
-- }
-+ /* Step 1: Travel to the longest prefix match in the trie */
-+ for (;;) {
-+ unsigned long index = get_index(key, n);
-+
-+ /* This bit of code is a bit tricky but it combines multiple
-+ * checks into a single check. The prefix consists of the
-+ * prefix plus zeros for the "bits" in the prefix. The index
-+ * is the difference between the key and this value. From
-+ * this we can actually derive several pieces of data.
-+ * if !(index >> bits)
-+ * we know the value is child index
-+ * else
-+ * we have a mismatch in skip bits and failed
-+ */
-+ if (index >> n->bits)
-+ break;
-
-- if (IS_LEAF(n)) {
-- ret = check_leaf(tb, t, n, key, flp, res, fib_flags);
-- if (ret > 0)
-- goto backtrace;
-+ /* we have found a leaf. Prefixes have already been compared */
-+ if (IS_LEAF(n))
- goto found;
-- }
--
-- cn = n;
-
-- /*
-- * It's a tnode, and we can do some extra checks here if we
-- * like, to avoid descending into a dead-end branch.
-- * This tnode is in the parent's child array at index
-- * key[p_pos..p_pos+p_bits] but potentially with some bits
-- * chopped off, so in reality the index may be just a
-- * subprefix, padded with zero at the end.
-- * We can also take a look at any skipped bits in this
-- * tnode - everything up to p_pos is supposed to be ok,
-- * and the non-chopped bits of the index (se previous
-- * paragraph) are also guaranteed ok, but the rest is
-- * considered unknown.
-- *
-- * The skipped bits are key[pos+bits..cn->pos].
-- */
--
-- /* If current_prefix_length < pos+bits, we are already doing
-- * actual prefix matching, which means everything from
-- * pos+(bits-chopped_off) onward must be zero along some
-- * branch of this subtree - otherwise there is *no* valid
-- * prefix present. Here we can only check the skipped
-- * bits. Remember, since we have already indexed into the
-- * parent's child array, we know that the bits we chopped of
-- * *are* zero.
-+ /* only record pn and cindex if we are going to be chopping
-+ * bits later. Otherwise we are just wasting cycles.
- */
--
-- /* NOTA BENE: Checking only skipped bits
-- for the new node here */
--
-- if (current_prefix_length < pos+bits) {
-- if (tkey_extract_bits(cn->key, current_prefix_length,
-- cn->pos - current_prefix_length)
-- || !(cn->child[0]))
-- goto backtrace;
-+ if (index) {
-+ pn = n;
-+ cindex = index;
- }
-
-- /*
-- * If chopped_off=0, the index is fully validated and we
-- * only need to look at the skipped bits for this, the new,
-- * tnode. What we actually want to do is to find out if
-- * these skipped bits match our key perfectly, or if we will
-- * have to count on finding a matching prefix further down,
-- * because if we do, we would like to have some way of
-- * verifying the existence of such a prefix at this point.
-- */
--
-- /* The only thing we can do at this point is to verify that
-- * any such matching prefix can indeed be a prefix to our
-- * key, and if the bits in the node we are inspecting that
-- * do not match our key are not ZERO, this cannot be true.
-- * Thus, find out where there is a mismatch (before cn->pos)
-- * and verify that all the mismatching bits are zero in the
-- * new tnode's key.
-- */
-+ n = rcu_dereference(n->child[index]);
-+ if (unlikely(!n))
-+ goto backtrace;
-+ }
-
-- /*
-- * Note: We aren't very concerned about the piece of
-- * the key that precede pn->pos+pn->bits, since these
-- * have already been checked. The bits after cn->pos
-- * aren't checked since these are by definition
-- * "unknown" at this point. Thus, what we want to see
-- * is if we are about to enter the "prefix matching"
-- * state, and in that case verify that the skipped
-- * bits that will prevail throughout this subtree are
-- * zero, as they have to be if we are to find a
-- * matching prefix.
-+ /* Step 2: Sort out leaves and begin backtracing for longest prefix */
-+ for (;;) {
-+ /* record the pointer where our next node pointer is stored */
-+ struct tnode __rcu **cptr = n->child;
-+
-+ /* This test verifies that none of the bits that differ
-+ * between the key and the prefix exist in the region of
-+ * the lsb and higher in the prefix.
- */
-+ if (unlikely(prefix_mismatch(key, n)))
-+ goto backtrace;
-
-- pref_mismatch = mask_pfx(cn->key ^ key, cn->pos);
-+ /* exit out and process leaf */
-+ if (unlikely(IS_LEAF(n)))
-+ break;
-
-- /*
-- * In short: If skipped bits in this node do not match
-- * the search key, enter the "prefix matching"
-- * state.directly.
-+ /* Don't bother recording parent info. Since we are in
-+ * prefix match mode we will have to come back to wherever
-+ * we started this traversal anyway
- */
-- if (pref_mismatch) {
-- /* fls(x) = __fls(x) + 1 */
-- int mp = KEYLENGTH - __fls(pref_mismatch) - 1;
--
-- if (tkey_extract_bits(cn->key, mp, cn->pos - mp) != 0)
-- goto backtrace;
--
-- if (current_prefix_length >= cn->pos)
-- current_prefix_length = mp;
-- }
--
-- pn = n; /* Descend */
-- chopped_off = 0;
-- continue;
-
-+ while ((n = rcu_dereference(*cptr)) == NULL) {
- backtrace:
-- chopped_off++;
--
-- /* As zero don't change the child key (cindex) */
-- while ((chopped_off <= pn->bits)
-- && !(cindex & (1<<(chopped_off-1))))
-- chopped_off++;
--
-- /* Decrease current_... with bits chopped off */
-- if (current_prefix_length > pn->pos + pn->bits - chopped_off)
-- current_prefix_length = pn->pos + pn->bits
-- - chopped_off;
--
-- /*
-- * Either we do the actual chop off according or if we have
-- * chopped off all bits in this tnode walk up to our parent.
-- */
--
-- if (chopped_off <= pn->bits) {
-- cindex &= ~(1 << (chopped_off-1));
-- } else {
-- struct tnode *parent = node_parent_rcu(pn);
-- if (!parent)
-- goto failed;
--
-- /* Get Child's index */
-- cindex = tkey_extract_bits(pn->key, parent->pos, parent->bits);
-- pn = parent;
-- chopped_off = 0;
--
- #ifdef CONFIG_IP_FIB_TRIE_STATS
-- this_cpu_inc(stats->backtrack);
-+ if (!n)
-+ this_cpu_inc(stats->null_node_hit);
- #endif
-- goto backtrace;
-+ /* If we are at cindex 0 there are no more bits for
-+ * us to strip at this level so we must ascend back
-+ * up one level to see if there are any more bits to
-+ * be stripped there.
-+ */
-+ while (!cindex) {
-+ t_key pkey = pn->key;
-+
-+ pn = node_parent_rcu(pn);
-+ if (unlikely(!pn))
-+ goto failed;
-+#ifdef CONFIG_IP_FIB_TRIE_STATS
-+ this_cpu_inc(stats->backtrack);
-+#endif
-+ /* Get Child's index */
-+ cindex = get_index(pkey, pn);
-+ }
-+
-+ /* strip the least significant bit from the cindex */
-+ cindex &= cindex - 1;
-+
-+ /* grab pointer for next child node */
-+ cptr = &pn->child[cindex];
- }
- }
--failed:
-- ret = 1;
-+
- found:
-+ /* Step 3: Process the leaf, if that fails fall back to backtracing */
-+ ret = check_leaf(tb, t, n, key, flp, res, fib_flags);
-+ if (unlikely(ret > 0))
-+ goto backtrace;
-+failed:
- rcu_read_unlock();
- return ret;
- }
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Wed, 31 Dec 2014 10:56:00 -0800
-Subject: [PATCH] fib_trie: Optimize fib_find_node
-
-This patch makes use of the same features I made use of for
-fib_table_lookup to streamline fib_find_node. The resultant code should be
-smaller and run faster than the original.
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -892,28 +892,34 @@ static void insert_leaf_info(struct hlis
- }
-
- /* rcu_read_lock needs to be hold by caller from readside */
--
- static struct tnode *fib_find_node(struct trie *t, u32 key)
- {
- struct tnode *n = rcu_dereference_rtnl(t->trie);
-- int pos = 0;
-
-- while (n && IS_TNODE(n)) {
-- if (tkey_sub_equals(n->key, pos, n->pos-pos, key)) {
-- pos = n->pos + n->bits;
-- n = tnode_get_child_rcu(n,
-- tkey_extract_bits(key,
-- n->pos,
-- n->bits));
-- } else
-+ while (n) {
-+ unsigned long index = get_index(key, n);
-+
-+ /* This bit of code is a bit tricky but it combines multiple
-+ * checks into a single check. The prefix consists of the
-+ * prefix plus zeros for the bits in the cindex. The index
-+ * is the difference between the key and this value. From
-+ * this we can actually derive several pieces of data.
-+ * if !(index >> bits)
-+ * we know the value is cindex
-+ * else
-+ * we have a mismatch in skip bits and failed
-+ */
-+ if (index >> n->bits)
-+ return NULL;
-+
-+ /* we have found a leaf. Prefixes have already been compared */
-+ if (IS_LEAF(n))
- break;
-- }
-- /* Case we have found a leaf. Compare prefixes */
-
-- if (n != NULL && IS_LEAF(n) && tkey_equals(key, n->key))
-- return n;
-+ n = rcu_dereference_rtnl(n->child[index]);
-+ }
-
-- return NULL;
-+ return n;
- }
-
- static void trie_rebalance(struct trie *t, struct tnode *tn)
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Wed, 31 Dec 2014 10:56:06 -0800
-Subject: [PATCH] fib_trie: Optimize fib_table_insert
-
-This patch updates the fib_table_insert function to take advantage of the
-changes made to improve the performance of fib_table_lookup. As a result
-the code should be smaller and run faster then the original.
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -222,31 +222,6 @@ static inline t_key tkey_extract_bits(t_
- return 0;
- }
-
--static inline int tkey_equals(t_key a, t_key b)
--{
-- return a == b;
--}
--
--static inline int tkey_sub_equals(t_key a, int offset, int bits, t_key b)
--{
-- if (bits == 0 || offset >= KEYLENGTH)
-- return 1;
-- bits = bits > KEYLENGTH ? KEYLENGTH : bits;
-- return ((a ^ b) << offset) >> (KEYLENGTH - bits) == 0;
--}
--
--static inline int tkey_mismatch(t_key a, int offset, t_key b)
--{
-- t_key diff = a ^ b;
-- int i = offset;
--
-- if (!diff)
-- return 0;
-- while ((diff << i) >> (KEYLENGTH-1) == 0)
-- i++;
-- return i;
--}
--
- /*
- To understand this stuff, an understanding of keys and all their bits is
- necessary. Every node in the trie has a key associated with it, but not
-@@ -485,6 +460,15 @@ static void tnode_put_child_reorg(struct
- rcu_assign_pointer(tn->child[i], n);
- }
-
-+static void put_child_root(struct tnode *tp, struct trie *t,
-+ t_key key, struct tnode *n)
-+{
-+ if (tp)
-+ put_child(tp, get_index(key, tp), n);
-+ else
-+ rcu_assign_pointer(t->trie, n);
-+}
-+
- #define MAX_WORK 10
- static struct tnode *resize(struct trie *t, struct tnode *tn)
- {
-@@ -959,138 +943,100 @@ static void trie_rebalance(struct trie *
-
- static struct list_head *fib_insert_node(struct trie *t, u32 key, int plen)
- {
-- int pos, newpos;
-- struct tnode *tp = NULL, *tn = NULL;
-- struct tnode *n;
-- struct tnode *l;
-- int missbit;
- struct list_head *fa_head = NULL;
-+ struct tnode *l, *n, *tp = NULL;
- struct leaf_info *li;
-- t_key cindex;
-
-- pos = 0;
-+ li = leaf_info_new(plen);
-+ if (!li)
-+ return NULL;
-+ fa_head = &li->falh;
-+
- n = rtnl_dereference(t->trie);
-
- /* If we point to NULL, stop. Either the tree is empty and we should
- * just put a new leaf in if, or we have reached an empty child slot,
- * and we should just put our new leaf in that.
-- * If we point to a T_TNODE, check if it matches our key. Note that
-- * a T_TNODE might be skipping any number of bits - its 'pos' need
-- * not be the parent's 'pos'+'bits'!
-- *
-- * If it does match the current key, get pos/bits from it, extract
-- * the index from our key, push the T_TNODE and walk the tree.
-- *
-- * If it doesn't, we have to replace it with a new T_TNODE.
- *
-- * If we point to a T_LEAF, it might or might not have the same key
-- * as we do. If it does, just change the value, update the T_LEAF's
-- * value, and return it.
-- * If it doesn't, we need to replace it with a T_TNODE.
-+ * If we hit a node with a key that does't match then we should stop
-+ * and create a new tnode to replace that node and insert ourselves
-+ * and the other node into the new tnode.
- */
-+ while (n) {
-+ unsigned long index = get_index(key, n);
-
-- while (n && IS_TNODE(n)) {
-- if (tkey_sub_equals(n->key, pos, n->pos-pos, key)) {
-- tp = n;
-- pos = n->pos + n->bits;
-- n = tnode_get_child(n,
-- tkey_extract_bits(key,
-- n->pos,
-- n->bits));
--
-- BUG_ON(n && node_parent(n) != tp);
-- } else
-+ /* This bit of code is a bit tricky but it combines multiple
-+ * checks into a single check. The prefix consists of the
-+ * prefix plus zeros for the "bits" in the prefix. The index
-+ * is the difference between the key and this value. From
-+ * this we can actually derive several pieces of data.
-+ * if !(index >> bits)
-+ * we know the value is child index
-+ * else
-+ * we have a mismatch in skip bits and failed
-+ */
-+ if (index >> n->bits)
- break;
-- }
--
-- /*
-- * n ----> NULL, LEAF or TNODE
-- *
-- * tp is n's (parent) ----> NULL or TNODE
-- */
-
-- BUG_ON(tp && IS_LEAF(tp));
--
-- /* Case 1: n is a leaf. Compare prefixes */
--
-- if (n != NULL && IS_LEAF(n) && tkey_equals(key, n->key)) {
-- li = leaf_info_new(plen);
--
-- if (!li)
-- return NULL;
-+ /* we have found a leaf. Prefixes have already been compared */
-+ if (IS_LEAF(n)) {
-+ /* Case 1: n is a leaf, and prefixes match*/
-+ insert_leaf_info(&n->list, li);
-+ return fa_head;
-+ }
-
-- fa_head = &li->falh;
-- insert_leaf_info(&n->list, li);
-- goto done;
-+ tp = n;
-+ n = rcu_dereference_rtnl(n->child[index]);
- }
-- l = leaf_new(key);
--
-- if (!l)
-- return NULL;
-
-- li = leaf_info_new(plen);
--
-- if (!li) {
-- node_free(l);
-+ l = leaf_new(key);
-+ if (!l) {
-+ free_leaf_info(li);
- return NULL;
- }
-
-- fa_head = &li->falh;
- insert_leaf_info(&l->list, li);
-
-- if (t->trie && n == NULL) {
-- /* Case 2: n is NULL, and will just insert a new leaf */
--
-- node_set_parent(l, tp);
--
-- cindex = tkey_extract_bits(key, tp->pos, tp->bits);
-- put_child(tp, cindex, l);
-- } else {
-- /* Case 3: n is a LEAF or a TNODE and the key doesn't match. */
-- /*
-- * Add a new tnode here
-- * first tnode need some special handling
-- */
-+ /* Case 2: n is a LEAF or a TNODE and the key doesn't match.
-+ *
-+ * Add a new tnode here
-+ * first tnode need some special handling
-+ * leaves us in position for handling as case 3
-+ */
-+ if (n) {
-+ struct tnode *tn;
-+ int newpos;
-
-- if (n) {
-- pos = tp ? tp->pos+tp->bits : 0;
-- newpos = tkey_mismatch(key, pos, n->key);
-- tn = tnode_new(n->key, newpos, 1);
-- } else {
-- newpos = 0;
-- tn = tnode_new(key, newpos, 1); /* First tnode */
-- }
-+ newpos = KEYLENGTH - __fls(n->key ^ key) - 1;
-
-+ tn = tnode_new(key, newpos, 1);
- if (!tn) {
- free_leaf_info(li);
- node_free(l);
- return NULL;
- }
-
-- node_set_parent(tn, tp);
--
-- missbit = tkey_extract_bits(key, newpos, 1);
-- put_child(tn, missbit, l);
-- put_child(tn, 1-missbit, n);
--
-- if (tp) {
-- cindex = tkey_extract_bits(key, tp->pos, tp->bits);
-- put_child(tp, cindex, tn);
-- } else {
-- rcu_assign_pointer(t->trie, tn);
-- }
-+ /* initialize routes out of node */
-+ NODE_INIT_PARENT(tn, tp);
-+ put_child(tn, get_index(key, tn) ^ 1, n);
-+
-+ /* start adding routes into the node */
-+ put_child_root(tp, t, key, tn);
-+ node_set_parent(n, tn);
-
-+ /* parent now has a NULL spot where the leaf can go */
- tp = tn;
- }
-
-- if (tp && tp->pos + tp->bits > 32)
-- pr_warn("fib_trie tp=%p pos=%d, bits=%d, key=%0x plen=%d\n",
-- tp, tp->pos, tp->bits, key, plen);
--
-- /* Rebalance the trie */
-+ /* Case 3: n is NULL, and will just insert a new leaf */
-+ if (tp) {
-+ NODE_INIT_PARENT(l, tp);
-+ put_child(tp, get_index(key, tp), l);
-+ trie_rebalance(t, tp);
-+ } else {
-+ rcu_assign_pointer(t->trie, l);
-+ }
-
-- trie_rebalance(t, tp);
--done:
- return fa_head;
- }
-
-@@ -1470,11 +1416,11 @@ static void trie_leaf_remove(struct trie
- pr_debug("entering trie_leaf_remove(%p)\n", l);
-
- if (tp) {
-- t_key cindex = tkey_extract_bits(l->key, tp->pos, tp->bits);
-- put_child(tp, cindex, NULL);
-+ put_child(tp, get_index(l->key, tp), NULL);
- trie_rebalance(t, tp);
-- } else
-+ } else {
- RCU_INIT_POINTER(t->trie, NULL);
-+ }
-
- node_free(l);
- }
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Wed, 31 Dec 2014 10:56:12 -0800
-Subject: [PATCH] fib_trie: Update meaning of pos to represent unchecked
- bits
-
-This change moves the pos value to the other side of the "bits" field. By
-doing this it actually simplifies a significant amount of code in the trie.
-
-For example when halving a tree we know that the bit lost exists at
-oldnode->pos, and if we inflate the tree the new bit being add is at
-tn->pos. Previously to find those bits you would have to subtract pos and
-bits from the keylength or start with a value of (1 << 31) and then shift
-that.
-
-There are a number of spots throughout the code that benefit from this. In
-the case of the hot-path searches the main advantage is that we can drop 2
-or more operations from the search path as we no longer need to compute the
-value for the index to be shifted by and can instead just use the raw pos
-value.
-
-In addition the tkey_extract_bits is now defunct and can be replaced by
-get_index since the two operations were doing the same thing, but now
-get_index does it much more quickly as it is only an xor and shift versus a
-pair of shifts and a subtraction.
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -90,8 +90,7 @@ typedef unsigned int t_key;
- #define IS_TNODE(n) ((n)->bits)
- #define IS_LEAF(n) (!(n)->bits)
-
--#define get_shift(_kv) (KEYLENGTH - (_kv)->pos - (_kv)->bits)
--#define get_index(_key, _kv) (((_key) ^ (_kv)->key) >> get_shift(_kv))
-+#define get_index(_key, _kv) (((_key) ^ (_kv)->key) >> (_kv)->pos)
-
- struct tnode {
- t_key key;
-@@ -209,81 +208,64 @@ static inline struct tnode *tnode_get_ch
- return rcu_dereference_rtnl(tn->child[i]);
- }
-
--static inline t_key mask_pfx(t_key k, unsigned int l)
--{
-- return (l == 0) ? 0 : k >> (KEYLENGTH-l) << (KEYLENGTH-l);
--}
--
--static inline t_key tkey_extract_bits(t_key a, unsigned int offset, unsigned int bits)
--{
-- if (offset < KEYLENGTH)
-- return ((t_key)(a << offset)) >> (KEYLENGTH - bits);
-- else
-- return 0;
--}
--
--/*
-- To understand this stuff, an understanding of keys and all their bits is
-- necessary. Every node in the trie has a key associated with it, but not
-- all of the bits in that key are significant.
--
-- Consider a node 'n' and its parent 'tp'.
--
-- If n is a leaf, every bit in its key is significant. Its presence is
-- necessitated by path compression, since during a tree traversal (when
-- searching for a leaf - unless we are doing an insertion) we will completely
-- ignore all skipped bits we encounter. Thus we need to verify, at the end of
-- a potentially successful search, that we have indeed been walking the
-- correct key path.
--
-- Note that we can never "miss" the correct key in the tree if present by
-- following the wrong path. Path compression ensures that segments of the key
-- that are the same for all keys with a given prefix are skipped, but the
-- skipped part *is* identical for each node in the subtrie below the skipped
-- bit! trie_insert() in this implementation takes care of that - note the
-- call to tkey_sub_equals() in trie_insert().
--
-- if n is an internal node - a 'tnode' here, the various parts of its key
-- have many different meanings.
--
-- Example:
-- _________________________________________________________________
-- | i | i | i | i | i | i | i | N | N | N | S | S | S | S | S | C |
-- -----------------------------------------------------------------
-- 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
--
-- _________________________________________________________________
-- | C | C | C | u | u | u | u | u | u | u | u | u | u | u | u | u |
-- -----------------------------------------------------------------
-- 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
--
-- tp->pos = 7
-- tp->bits = 3
-- n->pos = 15
-- n->bits = 4
--
-- First, let's just ignore the bits that come before the parent tp, that is
-- the bits from 0 to (tp->pos-1). They are *known* but at this point we do
-- not use them for anything.
--
-- The bits from (tp->pos) to (tp->pos + tp->bits - 1) - "N", above - are the
-- index into the parent's child array. That is, they will be used to find
-- 'n' among tp's children.
--
-- The bits from (tp->pos + tp->bits) to (n->pos - 1) - "S" - are skipped bits
-- for the node n.
--
-- All the bits we have seen so far are significant to the node n. The rest
-- of the bits are really not needed or indeed known in n->key.
--
-- The bits from (n->pos) to (n->pos + n->bits - 1) - "C" - are the index into
-- n's child array, and will of course be different for each child.
--
--
-- The rest of the bits, from (n->pos + n->bits) onward, are completely unknown
-- at this point.
--
--*/
-+/* To understand this stuff, an understanding of keys and all their bits is
-+ * necessary. Every node in the trie has a key associated with it, but not
-+ * all of the bits in that key are significant.
-+ *
-+ * Consider a node 'n' and its parent 'tp'.
-+ *
-+ * If n is a leaf, every bit in its key is significant. Its presence is
-+ * necessitated by path compression, since during a tree traversal (when
-+ * searching for a leaf - unless we are doing an insertion) we will completely
-+ * ignore all skipped bits we encounter. Thus we need to verify, at the end of
-+ * a potentially successful search, that we have indeed been walking the
-+ * correct key path.
-+ *
-+ * Note that we can never "miss" the correct key in the tree if present by
-+ * following the wrong path. Path compression ensures that segments of the key
-+ * that are the same for all keys with a given prefix are skipped, but the
-+ * skipped part *is* identical for each node in the subtrie below the skipped
-+ * bit! trie_insert() in this implementation takes care of that.
-+ *
-+ * if n is an internal node - a 'tnode' here, the various parts of its key
-+ * have many different meanings.
-+ *
-+ * Example:
-+ * _________________________________________________________________
-+ * | i | i | i | i | i | i | i | N | N | N | S | S | S | S | S | C |
-+ * -----------------------------------------------------------------
-+ * 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
-+ *
-+ * _________________________________________________________________
-+ * | C | C | C | u | u | u | u | u | u | u | u | u | u | u | u | u |
-+ * -----------------------------------------------------------------
-+ * 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
-+ *
-+ * tp->pos = 22
-+ * tp->bits = 3
-+ * n->pos = 13
-+ * n->bits = 4
-+ *
-+ * First, let's just ignore the bits that come before the parent tp, that is
-+ * the bits from (tp->pos + tp->bits) to 31. They are *known* but at this
-+ * point we do not use them for anything.
-+ *
-+ * The bits from (tp->pos) to (tp->pos + tp->bits - 1) - "N", above - are the
-+ * index into the parent's child array. That is, they will be used to find
-+ * 'n' among tp's children.
-+ *
-+ * The bits from (n->pos + n->bits) to (tn->pos - 1) - "S" - are skipped bits
-+ * for the node n.
-+ *
-+ * All the bits we have seen so far are significant to the node n. The rest
-+ * of the bits are really not needed or indeed known in n->key.
-+ *
-+ * The bits from (n->pos) to (n->pos + n->bits - 1) - "C" - are the index into
-+ * n's child array, and will of course be different for each child.
-+ *
-+ * The rest of the bits, from 0 to (n->pos + n->bits), are completely unknown
-+ * at this point.
-+ */
-
- static const int halve_threshold = 25;
- static const int inflate_threshold = 50;
-@@ -367,7 +349,7 @@ static struct tnode *leaf_new(t_key key)
- * as the nodes are searched
- */
- l->key = key;
-- l->pos = KEYLENGTH;
-+ l->pos = 0;
- /* set bits to 0 indicating we are not a tnode */
- l->bits = 0;
-
-@@ -400,7 +382,7 @@ static struct tnode *tnode_new(t_key key
- tn->parent = NULL;
- tn->pos = pos;
- tn->bits = bits;
-- tn->key = mask_pfx(key, pos);
-+ tn->key = (shift < KEYLENGTH) ? (key >> shift) << shift : 0;
- tn->full_children = 0;
- tn->empty_children = 1<<bits;
- }
-@@ -410,14 +392,12 @@ static struct tnode *tnode_new(t_key key
- return tn;
- }
-
--/*
-- * Check whether a tnode 'n' is "full", i.e. it is an internal node
-+/* Check whether a tnode 'n' is "full", i.e. it is an internal node
- * and no bits are skipped. See discussion in dyntree paper p. 6
- */
--
- static inline int tnode_full(const struct tnode *tn, const struct tnode *n)
- {
-- return n && IS_TNODE(n) && (n->pos == (tn->pos + tn->bits));
-+ return n && ((n->pos + n->bits) == tn->pos) && IS_TNODE(n);
- }
-
- static inline void put_child(struct tnode *tn, int i,
-@@ -641,11 +621,12 @@ static struct tnode *inflate(struct trie
- {
- int olen = tnode_child_length(oldtnode);
- struct tnode *tn;
-+ t_key m;
- int i;
-
- pr_debug("In inflate\n");
-
-- tn = tnode_new(oldtnode->key, oldtnode->pos, oldtnode->bits + 1);
-+ tn = tnode_new(oldtnode->key, oldtnode->pos - 1, oldtnode->bits + 1);
-
- if (!tn)
- return ERR_PTR(-ENOMEM);
-@@ -656,21 +637,18 @@ static struct tnode *inflate(struct trie
- * fails. In case of failure we return the oldnode and inflate
- * of tnode is ignored.
- */
-+ for (i = 0, m = 1u << tn->pos; i < olen; i++) {
-+ struct tnode *inode = tnode_get_child(oldtnode, i);
-
-- for (i = 0; i < olen; i++) {
-- struct tnode *inode;
--
-- inode = tnode_get_child(oldtnode, i);
-- if (tnode_full(oldtnode, inode) && inode->bits > 1) {
-+ if (tnode_full(oldtnode, inode) && (inode->bits > 1)) {
- struct tnode *left, *right;
-- t_key m = ~0U << (KEYLENGTH - 1) >> inode->pos;
-
-- left = tnode_new(inode->key&(~m), inode->pos + 1,
-+ left = tnode_new(inode->key & ~m, inode->pos,
- inode->bits - 1);
- if (!left)
- goto nomem;
-
-- right = tnode_new(inode->key|m, inode->pos + 1,
-+ right = tnode_new(inode->key | m, inode->pos,
- inode->bits - 1);
-
- if (!right) {
-@@ -694,9 +672,7 @@ static struct tnode *inflate(struct trie
-
- /* A leaf or an internal node with skipped bits */
- if (!tnode_full(oldtnode, inode)) {
-- put_child(tn,
-- tkey_extract_bits(inode->key, tn->pos, tn->bits),
-- inode);
-+ put_child(tn, get_index(inode->key, tn), inode);
- continue;
- }
-
-@@ -767,7 +743,7 @@ static struct tnode *halve(struct trie *
-
- pr_debug("In halve\n");
-
-- tn = tnode_new(oldtnode->key, oldtnode->pos, oldtnode->bits - 1);
-+ tn = tnode_new(oldtnode->key, oldtnode->pos + 1, oldtnode->bits - 1);
-
- if (!tn)
- return ERR_PTR(-ENOMEM);
-@@ -787,7 +763,7 @@ static struct tnode *halve(struct trie *
- if (left && right) {
- struct tnode *newn;
-
-- newn = tnode_new(left->key, tn->pos + tn->bits, 1);
-+ newn = tnode_new(left->key, oldtnode->pos, 1);
-
- if (!newn)
- goto nomem;
-@@ -915,7 +891,7 @@ static void trie_rebalance(struct trie *
- key = tn->key;
-
- while (tn != NULL && (tp = node_parent(tn)) != NULL) {
-- cindex = tkey_extract_bits(key, tp->pos, tp->bits);
-+ cindex = get_index(key, tp);
- wasfull = tnode_full(tp, tnode_get_child(tp, cindex));
- tn = resize(t, tn);
-
-@@ -1005,11 +981,8 @@ static struct list_head *fib_insert_node
- */
- if (n) {
- struct tnode *tn;
-- int newpos;
--
-- newpos = KEYLENGTH - __fls(n->key ^ key) - 1;
-
-- tn = tnode_new(key, newpos, 1);
-+ tn = tnode_new(key, __fls(key ^ n->key), 1);
- if (!tn) {
- free_leaf_info(li);
- node_free(l);
-@@ -1559,12 +1532,7 @@ static int trie_flush_leaf(struct tnode
- static struct tnode *leaf_walk_rcu(struct tnode *p, struct tnode *c)
- {
- do {
-- t_key idx;
--
-- if (c)
-- idx = tkey_extract_bits(c->key, p->pos, p->bits) + 1;
-- else
-- idx = 0;
-+ t_key idx = c ? idx = get_index(c->key, p) + 1 : 0;
-
- while (idx < 1u << p->bits) {
- c = tnode_get_child_rcu(p, idx++);
-@@ -1851,7 +1819,7 @@ rescan:
- /* Current node exhausted, pop back up */
- p = node_parent_rcu(tn);
- if (p) {
-- cindex = tkey_extract_bits(tn->key, p->pos, p->bits)+1;
-+ cindex = get_index(tn->key, p) + 1;
- tn = p;
- --iter->depth;
- goto rescan;
-@@ -2186,10 +2154,10 @@ static int fib_trie_seq_show(struct seq_
- if (IS_TNODE(n)) {
- __be32 prf = htonl(n->key);
-
-- seq_indent(seq, iter->depth - 1);
-- seq_printf(seq, " +-- %pI4/%d %d %d %d\n",
-- &prf, n->pos, n->bits, n->full_children,
-- n->empty_children);
-+ seq_indent(seq, iter->depth-1);
-+ seq_printf(seq, " +-- %pI4/%zu %u %u %u\n",
-+ &prf, KEYLENGTH - n->pos - n->bits, n->bits,
-+ n->full_children, n->empty_children);
- } else {
- struct leaf_info *li;
- __be32 val = htonl(n->key);
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Wed, 31 Dec 2014 10:56:18 -0800
-Subject: [PATCH] fib_trie: Use unsigned long for anything dealing with a
- shift by bits
-
-This change makes it so that anything that can be shifted by, or compared
-to a value shifted by bits is updated to be an unsigned long. This is
-mostly a precaution against an insanely huge address space that somehow
-starts coming close to the 2^32 root node size which would require
-something like 1.5 billion addresses.
-
-I chose unsigned long instead of unsigned long long since I do not believe
-it is possible to allocate a 32 bit tnode on a 32 bit system as the memory
-consumed would be 16GB + 28B which exceeds the addressible space for any
-one process.
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -146,8 +146,8 @@ struct trie {
- #endif
- };
-
--static void tnode_put_child_reorg(struct tnode *tn, int i, struct tnode *n,
-- int wasfull);
-+static void tnode_put_child_reorg(struct tnode *tn, unsigned long i,
-+ struct tnode *n, int wasfull);
- static struct tnode *resize(struct trie *t, struct tnode *tn);
- static struct tnode *inflate(struct trie *t, struct tnode *tn);
- static struct tnode *halve(struct trie *t, struct tnode *tn);
-@@ -183,25 +183,23 @@ static inline void node_set_parent(struc
- /* This provides us with the number of children in this node, in the case of a
- * leaf this will return 0 meaning none of the children are accessible.
- */
--static inline int tnode_child_length(const struct tnode *tn)
-+static inline unsigned long tnode_child_length(const struct tnode *tn)
- {
- return (1ul << tn->bits) & ~(1ul);
- }
-
--/*
-- * caller must hold RTNL
-- */
--static inline struct tnode *tnode_get_child(const struct tnode *tn, unsigned int i)
-+/* caller must hold RTNL */
-+static inline struct tnode *tnode_get_child(const struct tnode *tn,
-+ unsigned long i)
- {
- BUG_ON(i >= tnode_child_length(tn));
-
- return rtnl_dereference(tn->child[i]);
- }
-
--/*
-- * caller must hold RCU read lock or RTNL
-- */
--static inline struct tnode *tnode_get_child_rcu(const struct tnode *tn, unsigned int i)
-+/* caller must hold RCU read lock or RTNL */
-+static inline struct tnode *tnode_get_child_rcu(const struct tnode *tn,
-+ unsigned long i)
- {
- BUG_ON(i >= tnode_child_length(tn));
-
-@@ -400,7 +398,7 @@ static inline int tnode_full(const struc
- return n && ((n->pos + n->bits) == tn->pos) && IS_TNODE(n);
- }
-
--static inline void put_child(struct tnode *tn, int i,
-+static inline void put_child(struct tnode *tn, unsigned long i,
- struct tnode *n)
- {
- tnode_put_child_reorg(tn, i, n, -1);
-@@ -411,13 +409,13 @@ static inline void put_child(struct tnod
- * Update the value of full_children and empty_children.
- */
-
--static void tnode_put_child_reorg(struct tnode *tn, int i, struct tnode *n,
-- int wasfull)
-+static void tnode_put_child_reorg(struct tnode *tn, unsigned long i,
-+ struct tnode *n, int wasfull)
- {
- struct tnode *chi = rtnl_dereference(tn->child[i]);
- int isfull;
-
-- BUG_ON(i >= 1<<tn->bits);
-+ BUG_ON(i >= tnode_child_length(tn));
-
- /* update emptyChildren */
- if (n == NULL && chi != NULL)
-@@ -607,10 +605,10 @@ no_children:
- static void tnode_clean_free(struct tnode *tn)
- {
- struct tnode *tofree;
-- int i;
-+ unsigned long i;
-
- for (i = 0; i < tnode_child_length(tn); i++) {
-- tofree = rtnl_dereference(tn->child[i]);
-+ tofree = tnode_get_child(tn, i);
- if (tofree)
- node_free(tofree);
- }
-@@ -619,10 +617,10 @@ static void tnode_clean_free(struct tnod
-
- static struct tnode *inflate(struct trie *t, struct tnode *oldtnode)
- {
-- int olen = tnode_child_length(oldtnode);
-+ unsigned long olen = tnode_child_length(oldtnode);
- struct tnode *tn;
-+ unsigned long i;
- t_key m;
-- int i;
-
- pr_debug("In inflate\n");
-
-@@ -664,7 +662,7 @@ static struct tnode *inflate(struct trie
- for (i = 0; i < olen; i++) {
- struct tnode *inode = tnode_get_child(oldtnode, i);
- struct tnode *left, *right;
-- int size, j;
-+ unsigned long size, j;
-
- /* An empty child */
- if (inode == NULL)
-@@ -737,7 +735,7 @@ nomem:
-
- static struct tnode *halve(struct trie *t, struct tnode *oldtnode)
- {
-- int olen = tnode_child_length(oldtnode);
-+ unsigned long olen = tnode_child_length(oldtnode);
- struct tnode *tn, *left, *right;
- int i;
-
-@@ -1532,9 +1530,9 @@ static int trie_flush_leaf(struct tnode
- static struct tnode *leaf_walk_rcu(struct tnode *p, struct tnode *c)
- {
- do {
-- t_key idx = c ? idx = get_index(c->key, p) + 1 : 0;
-+ unsigned long idx = c ? idx = get_index(c->key, p) + 1 : 0;
-
-- while (idx < 1u << p->bits) {
-+ while (idx < tnode_child_length(p)) {
- c = tnode_get_child_rcu(p, idx++);
- if (!c)
- continue;
-@@ -1786,8 +1784,8 @@ struct fib_trie_iter {
-
- static struct tnode *fib_trie_get_next(struct fib_trie_iter *iter)
- {
-+ unsigned long cindex = iter->index;
- struct tnode *tn = iter->tnode;
-- unsigned int cindex = iter->index;
- struct tnode *p;
-
- /* A single entry routing table */
-@@ -1797,7 +1795,7 @@ static struct tnode *fib_trie_get_next(s
- pr_debug("get_next iter={node=%p index=%d depth=%d}\n",
- iter->tnode, iter->index, iter->depth);
- rescan:
-- while (cindex < (1<<tn->bits)) {
-+ while (cindex < tnode_child_length(tn)) {
- struct tnode *n = tnode_get_child_rcu(tn, cindex);
-
- if (n) {
-@@ -1874,15 +1872,16 @@ static void trie_collect_stats(struct tr
- hlist_for_each_entry_rcu(li, &n->list, hlist)
- ++s->prefixes;
- } else {
-- int i;
-+ unsigned long i;
-
- s->tnodes++;
- if (n->bits < MAX_STAT_DEPTH)
- s->nodesizes[n->bits]++;
-
-- for (i = 0; i < tnode_child_length(n); i++)
-+ for (i = 0; i < tnode_child_length(n); i++) {
- if (!rcu_access_pointer(n->child[i]))
- s->nullpointers++;
-+ }
- }
- }
- rcu_read_unlock();
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Wed, 31 Dec 2014 10:56:24 -0800
-Subject: [PATCH] fib_trie: Push rcu_read_lock/unlock to callers
-
-This change is to start cleaning up some of the rcu_read_lock/unlock
-handling. I realized while reviewing the code there are several spots that
-I don't believe are being handled correctly or are masking warnings by
-locally calling rcu_read_lock/unlock instead of calling them at the correct
-level.
-
-A common example is a call to fib_get_table followed by fib_table_lookup.
-The rcu_read_lock/unlock ought to wrap both but there are several spots where
-they were not wrapped.
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/include/net/ip_fib.h
-+++ b/include/net/ip_fib.h
-@@ -222,16 +222,19 @@ static inline struct fib_table *fib_new_
- static inline int fib_lookup(struct net *net, const struct flowi4 *flp,
- struct fib_result *res)
- {
-- struct fib_table *table;
-+ int err = -ENETUNREACH;
-
-- table = fib_get_table(net, RT_TABLE_LOCAL);
-- if (!fib_table_lookup(table, flp, res, FIB_LOOKUP_NOREF))
-- return 0;
--
-- table = fib_get_table(net, RT_TABLE_MAIN);
-- if (!fib_table_lookup(table, flp, res, FIB_LOOKUP_NOREF))
-- return 0;
-- return -ENETUNREACH;
-+ rcu_read_lock();
-+
-+ if (!fib_table_lookup(fib_get_table(net, RT_TABLE_LOCAL), flp, res,
-+ FIB_LOOKUP_NOREF) ||
-+ !fib_table_lookup(fib_get_table(net, RT_TABLE_MAIN), flp, res,
-+ FIB_LOOKUP_NOREF))
-+ err = 0;
-+
-+ rcu_read_unlock();
-+
-+ return err;
- }
-
- #else /* CONFIG_IP_MULTIPLE_TABLES */
-@@ -247,20 +250,25 @@ static inline int fib_lookup(struct net
- struct fib_result *res)
- {
- if (!net->ipv4.fib_has_custom_rules) {
-+ int err = -ENETUNREACH;
-+
-+ rcu_read_lock();
-+
- res->tclassid = 0;
-- if (net->ipv4.fib_local &&
-- !fib_table_lookup(net->ipv4.fib_local, flp, res,
-- FIB_LOOKUP_NOREF))
-- return 0;
-- if (net->ipv4.fib_main &&
-- !fib_table_lookup(net->ipv4.fib_main, flp, res,
-- FIB_LOOKUP_NOREF))
-- return 0;
-- if (net->ipv4.fib_default &&
-- !fib_table_lookup(net->ipv4.fib_default, flp, res,
-- FIB_LOOKUP_NOREF))
-- return 0;
-- return -ENETUNREACH;
-+ if ((net->ipv4.fib_local &&
-+ !fib_table_lookup(net->ipv4.fib_local, flp, res,
-+ FIB_LOOKUP_NOREF)) ||
-+ (net->ipv4.fib_main &&
-+ !fib_table_lookup(net->ipv4.fib_main, flp, res,
-+ FIB_LOOKUP_NOREF)) ||
-+ (net->ipv4.fib_default &&
-+ !fib_table_lookup(net->ipv4.fib_default, flp, res,
-+ FIB_LOOKUP_NOREF)))
-+ err = 0;
-+
-+ rcu_read_unlock();
-+
-+ return err;
- }
- return __fib_lookup(net, flp, res);
- }
---- a/net/ipv4/fib_frontend.c
-+++ b/net/ipv4/fib_frontend.c
-@@ -109,6 +109,7 @@ struct fib_table *fib_new_table(struct n
- return tb;
- }
-
-+/* caller must hold either rtnl or rcu read lock */
- struct fib_table *fib_get_table(struct net *net, u32 id)
- {
- struct fib_table *tb;
-@@ -119,15 +120,11 @@ struct fib_table *fib_get_table(struct n
- id = RT_TABLE_MAIN;
- h = id & (FIB_TABLE_HASHSZ - 1);
-
-- rcu_read_lock();
- head = &net->ipv4.fib_table_hash[h];
- hlist_for_each_entry_rcu(tb, head, tb_hlist) {
-- if (tb->tb_id == id) {
-- rcu_read_unlock();
-+ if (tb->tb_id == id)
- return tb;
-- }
- }
-- rcu_read_unlock();
- return NULL;
- }
- #endif /* CONFIG_IP_MULTIPLE_TABLES */
-@@ -167,16 +164,18 @@ static inline unsigned int __inet_dev_ad
- if (ipv4_is_multicast(addr))
- return RTN_MULTICAST;
-
-+ rcu_read_lock();
-+
- local_table = fib_get_table(net, RT_TABLE_LOCAL);
- if (local_table) {
- ret = RTN_UNICAST;
-- rcu_read_lock();
- if (!fib_table_lookup(local_table, &fl4, &res, FIB_LOOKUP_NOREF)) {
- if (!dev || dev == res.fi->fib_dev)
- ret = res.type;
- }
-- rcu_read_unlock();
- }
-+
-+ rcu_read_unlock();
- return ret;
- }
-
-@@ -923,7 +922,7 @@ no_promotions:
- #undef BRD1_OK
- }
-
--static void nl_fib_lookup(struct fib_result_nl *frn, struct fib_table *tb)
-+static void nl_fib_lookup(struct net *net, struct fib_result_nl *frn)
- {
-
- struct fib_result res;
-@@ -933,6 +932,11 @@ static void nl_fib_lookup(struct fib_res
- .flowi4_tos = frn->fl_tos,
- .flowi4_scope = frn->fl_scope,
- };
-+ struct fib_table *tb;
-+
-+ rcu_read_lock();
-+
-+ tb = fib_get_table(net, frn->tb_id_in);
-
- frn->err = -ENOENT;
- if (tb) {
-@@ -949,6 +953,8 @@ static void nl_fib_lookup(struct fib_res
- }
- local_bh_enable();
- }
-+
-+ rcu_read_unlock();
- }
-
- static void nl_fib_input(struct sk_buff *skb)
-@@ -956,7 +962,6 @@ static void nl_fib_input(struct sk_buff
- struct net *net;
- struct fib_result_nl *frn;
- struct nlmsghdr *nlh;
-- struct fib_table *tb;
- u32 portid;
-
- net = sock_net(skb->sk);
-@@ -972,9 +977,7 @@ static void nl_fib_input(struct sk_buff
- nlh = nlmsg_hdr(skb);
-
- frn = (struct fib_result_nl *) nlmsg_data(nlh);
-- tb = fib_get_table(net, frn->tb_id_in);
--
-- nl_fib_lookup(frn, tb);
-+ nl_fib_lookup(net, frn);
-
- portid = NETLINK_CB(skb).portid; /* netlink portid */
- NETLINK_CB(skb).portid = 0; /* from kernel */
---- a/net/ipv4/fib_rules.c
-+++ b/net/ipv4/fib_rules.c
-@@ -81,27 +81,25 @@ static int fib4_rule_action(struct fib_r
- break;
-
- case FR_ACT_UNREACHABLE:
-- err = -ENETUNREACH;
-- goto errout;
-+ return -ENETUNREACH;
-
- case FR_ACT_PROHIBIT:
-- err = -EACCES;
-- goto errout;
-+ return -EACCES;
-
- case FR_ACT_BLACKHOLE:
- default:
-- err = -EINVAL;
-- goto errout;
-+ return -EINVAL;
- }
-
-+ rcu_read_lock();
-+
- tbl = fib_get_table(rule->fr_net, rule->table);
-- if (!tbl)
-- goto errout;
-+ if (tbl)
-+ err = fib_table_lookup(tbl, &flp->u.ip4,
-+ (struct fib_result *)arg->result,
-+ arg->flags);
-
-- err = fib_table_lookup(tbl, &flp->u.ip4, (struct fib_result *) arg->result, arg->flags);
-- if (err > 0)
-- err = -EAGAIN;
--errout:
-+ rcu_read_unlock();
- return err;
- }
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -1181,72 +1181,6 @@ err:
- return err;
- }
-
--/* should be called with rcu_read_lock */
--static int check_leaf(struct fib_table *tb, struct trie *t, struct tnode *l,
-- t_key key, const struct flowi4 *flp,
-- struct fib_result *res, int fib_flags)
--{
-- struct leaf_info *li;
-- struct hlist_head *hhead = &l->list;
--
-- hlist_for_each_entry_rcu(li, hhead, hlist) {
-- struct fib_alias *fa;
--
-- if (l->key != (key & li->mask_plen))
-- continue;
--
-- list_for_each_entry_rcu(fa, &li->falh, fa_list) {
-- struct fib_info *fi = fa->fa_info;
-- int nhsel, err;
--
-- if (fa->fa_tos && fa->fa_tos != flp->flowi4_tos)
-- continue;
-- if (fi->fib_dead)
-- continue;
-- if (fa->fa_info->fib_scope < flp->flowi4_scope)
-- continue;
-- fib_alias_accessed(fa);
-- err = fib_props[fa->fa_type].error;
-- if (unlikely(err < 0)) {
--#ifdef CONFIG_IP_FIB_TRIE_STATS
-- this_cpu_inc(t->stats->semantic_match_passed);
--#endif
-- return err;
-- }
-- if (fi->fib_flags & RTNH_F_DEAD)
-- continue;
-- for (nhsel = 0; nhsel < fi->fib_nhs; nhsel++) {
-- const struct fib_nh *nh = &fi->fib_nh[nhsel];
--
-- if (nh->nh_flags & RTNH_F_DEAD)
-- continue;
-- if (flp->flowi4_oif && flp->flowi4_oif != nh->nh_oif)
-- continue;
--
--#ifdef CONFIG_IP_FIB_TRIE_STATS
-- this_cpu_inc(t->stats->semantic_match_passed);
--#endif
-- res->prefixlen = li->plen;
-- res->nh_sel = nhsel;
-- res->type = fa->fa_type;
-- res->scope = fi->fib_scope;
-- res->fi = fi;
-- res->table = tb;
-- res->fa_head = &li->falh;
-- if (!(fib_flags & FIB_LOOKUP_NOREF))
-- atomic_inc(&fi->fib_clntref);
-- return 0;
-- }
-- }
--
--#ifdef CONFIG_IP_FIB_TRIE_STATS
-- this_cpu_inc(t->stats->semantic_match_miss);
--#endif
-- }
--
-- return 1;
--}
--
- static inline t_key prefix_mismatch(t_key key, struct tnode *n)
- {
- t_key prefix = n->key;
-@@ -1254,6 +1188,7 @@ static inline t_key prefix_mismatch(t_ke
- return (key ^ prefix) & (prefix | -prefix);
- }
-
-+/* should be called with rcu_read_lock */
- int fib_table_lookup(struct fib_table *tb, const struct flowi4 *flp,
- struct fib_result *res, int fib_flags)
- {
-@@ -1263,14 +1198,12 @@ int fib_table_lookup(struct fib_table *t
- #endif
- const t_key key = ntohl(flp->daddr);
- struct tnode *n, *pn;
-+ struct leaf_info *li;
- t_key cindex;
-- int ret = 1;
--
-- rcu_read_lock();
-
- n = rcu_dereference(t->trie);
- if (!n)
-- goto failed;
-+ return -EAGAIN;
-
- #ifdef CONFIG_IP_FIB_TRIE_STATS
- this_cpu_inc(stats->gets);
-@@ -1350,7 +1283,7 @@ backtrace:
-
- pn = node_parent_rcu(pn);
- if (unlikely(!pn))
-- goto failed;
-+ return -EAGAIN;
- #ifdef CONFIG_IP_FIB_TRIE_STATS
- this_cpu_inc(stats->backtrack);
- #endif
-@@ -1368,12 +1301,62 @@ backtrace:
-
- found:
- /* Step 3: Process the leaf, if that fails fall back to backtracing */
-- ret = check_leaf(tb, t, n, key, flp, res, fib_flags);
-- if (unlikely(ret > 0))
-- goto backtrace;
--failed:
-- rcu_read_unlock();
-- return ret;
-+ hlist_for_each_entry_rcu(li, &n->list, hlist) {
-+ struct fib_alias *fa;
-+
-+ if ((key ^ n->key) & li->mask_plen)
-+ continue;
-+
-+ list_for_each_entry_rcu(fa, &li->falh, fa_list) {
-+ struct fib_info *fi = fa->fa_info;
-+ int nhsel, err;
-+
-+ if (fa->fa_tos && fa->fa_tos != flp->flowi4_tos)
-+ continue;
-+ if (fi->fib_dead)
-+ continue;
-+ if (fa->fa_info->fib_scope < flp->flowi4_scope)
-+ continue;
-+ fib_alias_accessed(fa);
-+ err = fib_props[fa->fa_type].error;
-+ if (unlikely(err < 0)) {
-+#ifdef CONFIG_IP_FIB_TRIE_STATS
-+ this_cpu_inc(stats->semantic_match_passed);
-+#endif
-+ return err;
-+ }
-+ if (fi->fib_flags & RTNH_F_DEAD)
-+ continue;
-+ for (nhsel = 0; nhsel < fi->fib_nhs; nhsel++) {
-+ const struct fib_nh *nh = &fi->fib_nh[nhsel];
-+
-+ if (nh->nh_flags & RTNH_F_DEAD)
-+ continue;
-+ if (flp->flowi4_oif && flp->flowi4_oif != nh->nh_oif)
-+ continue;
-+
-+ if (!(fib_flags & FIB_LOOKUP_NOREF))
-+ atomic_inc(&fi->fib_clntref);
-+
-+ res->prefixlen = li->plen;
-+ res->nh_sel = nhsel;
-+ res->type = fa->fa_type;
-+ res->scope = fi->fib_scope;
-+ res->fi = fi;
-+ res->table = tb;
-+ res->fa_head = &li->falh;
-+#ifdef CONFIG_IP_FIB_TRIE_STATS
-+ this_cpu_inc(stats->semantic_match_passed);
-+#endif
-+ return err;
-+ }
-+ }
-+
-+#ifdef CONFIG_IP_FIB_TRIE_STATS
-+ this_cpu_inc(stats->semantic_match_miss);
-+#endif
-+ }
-+ goto backtrace;
- }
- EXPORT_SYMBOL_GPL(fib_table_lookup);
-
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Wed, 31 Dec 2014 10:56:31 -0800
-Subject: [PATCH] fib_trie: Move resize to after inflate/halve
-
-This change consists of a cut/paste of resize to behind inflate and halve
-so that I could remove the two function prototypes.
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -149,8 +149,6 @@ struct trie {
- static void tnode_put_child_reorg(struct tnode *tn, unsigned long i,
- struct tnode *n, int wasfull);
- static struct tnode *resize(struct trie *t, struct tnode *tn);
--static struct tnode *inflate(struct trie *t, struct tnode *tn);
--static struct tnode *halve(struct trie *t, struct tnode *tn);
- /* tnodes to free after resize(); protected by RTNL */
- static struct callback_head *tnode_free_head;
- static size_t tnode_free_size;
-@@ -447,161 +445,6 @@ static void put_child_root(struct tnode
- rcu_assign_pointer(t->trie, n);
- }
-
--#define MAX_WORK 10
--static struct tnode *resize(struct trie *t, struct tnode *tn)
--{
-- struct tnode *old_tn, *n = NULL;
-- int inflate_threshold_use;
-- int halve_threshold_use;
-- int max_work;
--
-- if (!tn)
-- return NULL;
--
-- pr_debug("In tnode_resize %p inflate_threshold=%d threshold=%d\n",
-- tn, inflate_threshold, halve_threshold);
--
-- /* No children */
-- if (tn->empty_children > (tnode_child_length(tn) - 1))
-- goto no_children;
--
-- /* One child */
-- if (tn->empty_children == (tnode_child_length(tn) - 1))
-- goto one_child;
-- /*
-- * Double as long as the resulting node has a number of
-- * nonempty nodes that are above the threshold.
-- */
--
-- /*
-- * From "Implementing a dynamic compressed trie" by Stefan Nilsson of
-- * the Helsinki University of Technology and Matti Tikkanen of Nokia
-- * Telecommunications, page 6:
-- * "A node is doubled if the ratio of non-empty children to all
-- * children in the *doubled* node is at least 'high'."
-- *
-- * 'high' in this instance is the variable 'inflate_threshold'. It
-- * is expressed as a percentage, so we multiply it with
-- * tnode_child_length() and instead of multiplying by 2 (since the
-- * child array will be doubled by inflate()) and multiplying
-- * the left-hand side by 100 (to handle the percentage thing) we
-- * multiply the left-hand side by 50.
-- *
-- * The left-hand side may look a bit weird: tnode_child_length(tn)
-- * - tn->empty_children is of course the number of non-null children
-- * in the current node. tn->full_children is the number of "full"
-- * children, that is non-null tnodes with a skip value of 0.
-- * All of those will be doubled in the resulting inflated tnode, so
-- * we just count them one extra time here.
-- *
-- * A clearer way to write this would be:
-- *
-- * to_be_doubled = tn->full_children;
-- * not_to_be_doubled = tnode_child_length(tn) - tn->empty_children -
-- * tn->full_children;
-- *
-- * new_child_length = tnode_child_length(tn) * 2;
-- *
-- * new_fill_factor = 100 * (not_to_be_doubled + 2*to_be_doubled) /
-- * new_child_length;
-- * if (new_fill_factor >= inflate_threshold)
-- *
-- * ...and so on, tho it would mess up the while () loop.
-- *
-- * anyway,
-- * 100 * (not_to_be_doubled + 2*to_be_doubled) / new_child_length >=
-- * inflate_threshold
-- *
-- * avoid a division:
-- * 100 * (not_to_be_doubled + 2*to_be_doubled) >=
-- * inflate_threshold * new_child_length
-- *
-- * expand not_to_be_doubled and to_be_doubled, and shorten:
-- * 100 * (tnode_child_length(tn) - tn->empty_children +
-- * tn->full_children) >= inflate_threshold * new_child_length
-- *
-- * expand new_child_length:
-- * 100 * (tnode_child_length(tn) - tn->empty_children +
-- * tn->full_children) >=
-- * inflate_threshold * tnode_child_length(tn) * 2
-- *
-- * shorten again:
-- * 50 * (tn->full_children + tnode_child_length(tn) -
-- * tn->empty_children) >= inflate_threshold *
-- * tnode_child_length(tn)
-- *
-- */
--
-- /* Keep root node larger */
--
-- if (!node_parent(tn)) {
-- inflate_threshold_use = inflate_threshold_root;
-- halve_threshold_use = halve_threshold_root;
-- } else {
-- inflate_threshold_use = inflate_threshold;
-- halve_threshold_use = halve_threshold;
-- }
--
-- max_work = MAX_WORK;
-- while ((tn->full_children > 0 && max_work-- &&
-- 50 * (tn->full_children + tnode_child_length(tn)
-- - tn->empty_children)
-- >= inflate_threshold_use * tnode_child_length(tn))) {
--
-- old_tn = tn;
-- tn = inflate(t, tn);
--
-- if (IS_ERR(tn)) {
-- tn = old_tn;
--#ifdef CONFIG_IP_FIB_TRIE_STATS
-- this_cpu_inc(t->stats->resize_node_skipped);
--#endif
-- break;
-- }
-- }
--
-- /* Return if at least one inflate is run */
-- if (max_work != MAX_WORK)
-- return tn;
--
-- /*
-- * Halve as long as the number of empty children in this
-- * node is above threshold.
-- */
--
-- max_work = MAX_WORK;
-- while (tn->bits > 1 && max_work-- &&
-- 100 * (tnode_child_length(tn) - tn->empty_children) <
-- halve_threshold_use * tnode_child_length(tn)) {
--
-- old_tn = tn;
-- tn = halve(t, tn);
-- if (IS_ERR(tn)) {
-- tn = old_tn;
--#ifdef CONFIG_IP_FIB_TRIE_STATS
-- this_cpu_inc(t->stats->resize_node_skipped);
--#endif
-- break;
-- }
-- }
--
--
-- /* Only one child remains */
-- if (tn->empty_children == (tnode_child_length(tn) - 1)) {
-- unsigned long i;
--one_child:
-- for (i = tnode_child_length(tn); !n && i;)
-- n = tnode_get_child(tn, --i);
--no_children:
-- /* compress one level */
-- node_set_parent(n, NULL);
-- tnode_free_safe(tn);
-- return n;
-- }
-- return tn;
--}
--
--
- static void tnode_clean_free(struct tnode *tn)
- {
- struct tnode *tofree;
-@@ -804,6 +647,160 @@ nomem:
- return ERR_PTR(-ENOMEM);
- }
-
-+#define MAX_WORK 10
-+static struct tnode *resize(struct trie *t, struct tnode *tn)
-+{
-+ struct tnode *old_tn, *n = NULL;
-+ int inflate_threshold_use;
-+ int halve_threshold_use;
-+ int max_work;
-+
-+ if (!tn)
-+ return NULL;
-+
-+ pr_debug("In tnode_resize %p inflate_threshold=%d threshold=%d\n",
-+ tn, inflate_threshold, halve_threshold);
-+
-+ /* No children */
-+ if (tn->empty_children > (tnode_child_length(tn) - 1))
-+ goto no_children;
-+
-+ /* One child */
-+ if (tn->empty_children == (tnode_child_length(tn) - 1))
-+ goto one_child;
-+ /*
-+ * Double as long as the resulting node has a number of
-+ * nonempty nodes that are above the threshold.
-+ */
-+
-+ /*
-+ * From "Implementing a dynamic compressed trie" by Stefan Nilsson of
-+ * the Helsinki University of Technology and Matti Tikkanen of Nokia
-+ * Telecommunications, page 6:
-+ * "A node is doubled if the ratio of non-empty children to all
-+ * children in the *doubled* node is at least 'high'."
-+ *
-+ * 'high' in this instance is the variable 'inflate_threshold'. It
-+ * is expressed as a percentage, so we multiply it with
-+ * tnode_child_length() and instead of multiplying by 2 (since the
-+ * child array will be doubled by inflate()) and multiplying
-+ * the left-hand side by 100 (to handle the percentage thing) we
-+ * multiply the left-hand side by 50.
-+ *
-+ * The left-hand side may look a bit weird: tnode_child_length(tn)
-+ * - tn->empty_children is of course the number of non-null children
-+ * in the current node. tn->full_children is the number of "full"
-+ * children, that is non-null tnodes with a skip value of 0.
-+ * All of those will be doubled in the resulting inflated tnode, so
-+ * we just count them one extra time here.
-+ *
-+ * A clearer way to write this would be:
-+ *
-+ * to_be_doubled = tn->full_children;
-+ * not_to_be_doubled = tnode_child_length(tn) - tn->empty_children -
-+ * tn->full_children;
-+ *
-+ * new_child_length = tnode_child_length(tn) * 2;
-+ *
-+ * new_fill_factor = 100 * (not_to_be_doubled + 2*to_be_doubled) /
-+ * new_child_length;
-+ * if (new_fill_factor >= inflate_threshold)
-+ *
-+ * ...and so on, tho it would mess up the while () loop.
-+ *
-+ * anyway,
-+ * 100 * (not_to_be_doubled + 2*to_be_doubled) / new_child_length >=
-+ * inflate_threshold
-+ *
-+ * avoid a division:
-+ * 100 * (not_to_be_doubled + 2*to_be_doubled) >=
-+ * inflate_threshold * new_child_length
-+ *
-+ * expand not_to_be_doubled and to_be_doubled, and shorten:
-+ * 100 * (tnode_child_length(tn) - tn->empty_children +
-+ * tn->full_children) >= inflate_threshold * new_child_length
-+ *
-+ * expand new_child_length:
-+ * 100 * (tnode_child_length(tn) - tn->empty_children +
-+ * tn->full_children) >=
-+ * inflate_threshold * tnode_child_length(tn) * 2
-+ *
-+ * shorten again:
-+ * 50 * (tn->full_children + tnode_child_length(tn) -
-+ * tn->empty_children) >= inflate_threshold *
-+ * tnode_child_length(tn)
-+ *
-+ */
-+
-+ /* Keep root node larger */
-+
-+ if (!node_parent(tn)) {
-+ inflate_threshold_use = inflate_threshold_root;
-+ halve_threshold_use = halve_threshold_root;
-+ } else {
-+ inflate_threshold_use = inflate_threshold;
-+ halve_threshold_use = halve_threshold;
-+ }
-+
-+ max_work = MAX_WORK;
-+ while ((tn->full_children > 0 && max_work-- &&
-+ 50 * (tn->full_children + tnode_child_length(tn)
-+ - tn->empty_children)
-+ >= inflate_threshold_use * tnode_child_length(tn))) {
-+
-+ old_tn = tn;
-+ tn = inflate(t, tn);
-+
-+ if (IS_ERR(tn)) {
-+ tn = old_tn;
-+#ifdef CONFIG_IP_FIB_TRIE_STATS
-+ this_cpu_inc(t->stats->resize_node_skipped);
-+#endif
-+ break;
-+ }
-+ }
-+
-+ /* Return if at least one inflate is run */
-+ if (max_work != MAX_WORK)
-+ return tn;
-+
-+ /*
-+ * Halve as long as the number of empty children in this
-+ * node is above threshold.
-+ */
-+
-+ max_work = MAX_WORK;
-+ while (tn->bits > 1 && max_work-- &&
-+ 100 * (tnode_child_length(tn) - tn->empty_children) <
-+ halve_threshold_use * tnode_child_length(tn)) {
-+
-+ old_tn = tn;
-+ tn = halve(t, tn);
-+ if (IS_ERR(tn)) {
-+ tn = old_tn;
-+#ifdef CONFIG_IP_FIB_TRIE_STATS
-+ this_cpu_inc(t->stats->resize_node_skipped);
-+#endif
-+ break;
-+ }
-+ }
-+
-+
-+ /* Only one child remains */
-+ if (tn->empty_children == (tnode_child_length(tn) - 1)) {
-+ unsigned long i;
-+one_child:
-+ for (i = tnode_child_length(tn); !n && i;)
-+ n = tnode_get_child(tn, --i);
-+no_children:
-+ /* compress one level */
-+ node_set_parent(n, NULL);
-+ tnode_free_safe(tn);
-+ return n;
-+ }
-+ return tn;
-+}
-+
- /* readside must use rcu_read_lock currently dump routines
- via get_fa_head and dump */
-
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Wed, 31 Dec 2014 10:56:37 -0800
-Subject: [PATCH] fib_trie: Add functions should_inflate and should_halve
-
-This change pulls the logic for if we should inflate/halve the nodes out
-into separate functions. It also addresses what I believe is a bug where 1
-full node is all that is needed to keep a node from ever being halved.
-
-Simple script to reproduce the issue:
- modprobe dummy; ifconfig dummy0 up
- for i in `seq 0 255`; do ifconfig dummy0:$i 10.0.${i}.1/24 up; done
- ifconfig dummy0:256 10.0.255.33/16 up
- for i in `seq 0 254`; do ifconfig dummy0:$i down; done
-
-Results from /proc/net/fib_triestat
-Before:
- Local:
- Aver depth: 3.00
- Max depth: 4
- Leaves: 17
- Prefixes: 18
- Internal nodes: 11
- 1: 8 2: 2 10: 1
- Pointers: 1048
- Null ptrs: 1021
- Total size: 11 kB
-After:
- Local:
- Aver depth: 3.41
- Max depth: 5
- Leaves: 17
- Prefixes: 18
- Internal nodes: 12
- 1: 8 2: 3 3: 1
- Pointers: 36
- Null ptrs: 8
- Total size: 3 kB
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -647,12 +647,94 @@ nomem:
- return ERR_PTR(-ENOMEM);
- }
-
-+/* From "Implementing a dynamic compressed trie" by Stefan Nilsson of
-+ * the Helsinki University of Technology and Matti Tikkanen of Nokia
-+ * Telecommunications, page 6:
-+ * "A node is doubled if the ratio of non-empty children to all
-+ * children in the *doubled* node is at least 'high'."
-+ *
-+ * 'high' in this instance is the variable 'inflate_threshold'. It
-+ * is expressed as a percentage, so we multiply it with
-+ * tnode_child_length() and instead of multiplying by 2 (since the
-+ * child array will be doubled by inflate()) and multiplying
-+ * the left-hand side by 100 (to handle the percentage thing) we
-+ * multiply the left-hand side by 50.
-+ *
-+ * The left-hand side may look a bit weird: tnode_child_length(tn)
-+ * - tn->empty_children is of course the number of non-null children
-+ * in the current node. tn->full_children is the number of "full"
-+ * children, that is non-null tnodes with a skip value of 0.
-+ * All of those will be doubled in the resulting inflated tnode, so
-+ * we just count them one extra time here.
-+ *
-+ * A clearer way to write this would be:
-+ *
-+ * to_be_doubled = tn->full_children;
-+ * not_to_be_doubled = tnode_child_length(tn) - tn->empty_children -
-+ * tn->full_children;
-+ *
-+ * new_child_length = tnode_child_length(tn) * 2;
-+ *
-+ * new_fill_factor = 100 * (not_to_be_doubled + 2*to_be_doubled) /
-+ * new_child_length;
-+ * if (new_fill_factor >= inflate_threshold)
-+ *
-+ * ...and so on, tho it would mess up the while () loop.
-+ *
-+ * anyway,
-+ * 100 * (not_to_be_doubled + 2*to_be_doubled) / new_child_length >=
-+ * inflate_threshold
-+ *
-+ * avoid a division:
-+ * 100 * (not_to_be_doubled + 2*to_be_doubled) >=
-+ * inflate_threshold * new_child_length
-+ *
-+ * expand not_to_be_doubled and to_be_doubled, and shorten:
-+ * 100 * (tnode_child_length(tn) - tn->empty_children +
-+ * tn->full_children) >= inflate_threshold * new_child_length
-+ *
-+ * expand new_child_length:
-+ * 100 * (tnode_child_length(tn) - tn->empty_children +
-+ * tn->full_children) >=
-+ * inflate_threshold * tnode_child_length(tn) * 2
-+ *
-+ * shorten again:
-+ * 50 * (tn->full_children + tnode_child_length(tn) -
-+ * tn->empty_children) >= inflate_threshold *
-+ * tnode_child_length(tn)
-+ *
-+ */
-+static bool should_inflate(const struct tnode *tn)
-+{
-+ unsigned long used = tnode_child_length(tn);
-+ unsigned long threshold = used;
-+
-+ /* Keep root node larger */
-+ threshold *= node_parent(tn) ? inflate_threshold :
-+ inflate_threshold_root;
-+ used += tn->full_children;
-+ used -= tn->empty_children;
-+
-+ return tn->pos && ((50 * used) >= threshold);
-+}
-+
-+static bool should_halve(const struct tnode *tn)
-+{
-+ unsigned long used = tnode_child_length(tn);
-+ unsigned long threshold = used;
-+
-+ /* Keep root node larger */
-+ threshold *= node_parent(tn) ? halve_threshold :
-+ halve_threshold_root;
-+ used -= tn->empty_children;
-+
-+ return (tn->bits > 1) && ((100 * used) < threshold);
-+}
-+
- #define MAX_WORK 10
- static struct tnode *resize(struct trie *t, struct tnode *tn)
- {
- struct tnode *old_tn, *n = NULL;
-- int inflate_threshold_use;
-- int halve_threshold_use;
- int max_work;
-
- if (!tn)
-@@ -668,86 +750,12 @@ static struct tnode *resize(struct trie
- /* One child */
- if (tn->empty_children == (tnode_child_length(tn) - 1))
- goto one_child;
-- /*
-- * Double as long as the resulting node has a number of
-- * nonempty nodes that are above the threshold.
-- */
-
-- /*
-- * From "Implementing a dynamic compressed trie" by Stefan Nilsson of
-- * the Helsinki University of Technology and Matti Tikkanen of Nokia
-- * Telecommunications, page 6:
-- * "A node is doubled if the ratio of non-empty children to all
-- * children in the *doubled* node is at least 'high'."
-- *
-- * 'high' in this instance is the variable 'inflate_threshold'. It
-- * is expressed as a percentage, so we multiply it with
-- * tnode_child_length() and instead of multiplying by 2 (since the
-- * child array will be doubled by inflate()) and multiplying
-- * the left-hand side by 100 (to handle the percentage thing) we
-- * multiply the left-hand side by 50.
-- *
-- * The left-hand side may look a bit weird: tnode_child_length(tn)
-- * - tn->empty_children is of course the number of non-null children
-- * in the current node. tn->full_children is the number of "full"
-- * children, that is non-null tnodes with a skip value of 0.
-- * All of those will be doubled in the resulting inflated tnode, so
-- * we just count them one extra time here.
-- *
-- * A clearer way to write this would be:
-- *
-- * to_be_doubled = tn->full_children;
-- * not_to_be_doubled = tnode_child_length(tn) - tn->empty_children -
-- * tn->full_children;
-- *
-- * new_child_length = tnode_child_length(tn) * 2;
-- *
-- * new_fill_factor = 100 * (not_to_be_doubled + 2*to_be_doubled) /
-- * new_child_length;
-- * if (new_fill_factor >= inflate_threshold)
-- *
-- * ...and so on, tho it would mess up the while () loop.
-- *
-- * anyway,
-- * 100 * (not_to_be_doubled + 2*to_be_doubled) / new_child_length >=
-- * inflate_threshold
-- *
-- * avoid a division:
-- * 100 * (not_to_be_doubled + 2*to_be_doubled) >=
-- * inflate_threshold * new_child_length
-- *
-- * expand not_to_be_doubled and to_be_doubled, and shorten:
-- * 100 * (tnode_child_length(tn) - tn->empty_children +
-- * tn->full_children) >= inflate_threshold * new_child_length
-- *
-- * expand new_child_length:
-- * 100 * (tnode_child_length(tn) - tn->empty_children +
-- * tn->full_children) >=
-- * inflate_threshold * tnode_child_length(tn) * 2
-- *
-- * shorten again:
-- * 50 * (tn->full_children + tnode_child_length(tn) -
-- * tn->empty_children) >= inflate_threshold *
-- * tnode_child_length(tn)
-- *
-+ /* Double as long as the resulting node has a number of
-+ * nonempty nodes that are above the threshold.
- */
--
-- /* Keep root node larger */
--
-- if (!node_parent(tn)) {
-- inflate_threshold_use = inflate_threshold_root;
-- halve_threshold_use = halve_threshold_root;
-- } else {
-- inflate_threshold_use = inflate_threshold;
-- halve_threshold_use = halve_threshold;
-- }
--
- max_work = MAX_WORK;
-- while ((tn->full_children > 0 && max_work-- &&
-- 50 * (tn->full_children + tnode_child_length(tn)
-- - tn->empty_children)
-- >= inflate_threshold_use * tnode_child_length(tn))) {
--
-+ while (should_inflate(tn) && max_work--) {
- old_tn = tn;
- tn = inflate(t, tn);
-
-@@ -764,16 +772,11 @@ static struct tnode *resize(struct trie
- if (max_work != MAX_WORK)
- return tn;
-
-- /*
-- * Halve as long as the number of empty children in this
-+ /* Halve as long as the number of empty children in this
- * node is above threshold.
- */
--
- max_work = MAX_WORK;
-- while (tn->bits > 1 && max_work-- &&
-- 100 * (tnode_child_length(tn) - tn->empty_children) <
-- halve_threshold_use * tnode_child_length(tn)) {
--
-+ while (should_halve(tn) && max_work--) {
- old_tn = tn;
- tn = halve(t, tn);
- if (IS_ERR(tn)) {
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Wed, 31 Dec 2014 10:56:43 -0800
-Subject: [PATCH] fib_trie: Push assignment of child to parent down into
- inflate/halve
-
-This change makes it so that the assignment of the tnode to the parent is
-handled directly within whatever function is currently handling the node be
-it inflate, halve, or resize. By doing this we can avoid some of the need
-to set NULL pointers in the tree while we are resizing the subnodes.
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -146,9 +146,7 @@ struct trie {
- #endif
- };
-
--static void tnode_put_child_reorg(struct tnode *tn, unsigned long i,
-- struct tnode *n, int wasfull);
--static struct tnode *resize(struct trie *t, struct tnode *tn);
-+static void resize(struct trie *t, struct tnode *tn);
- /* tnodes to free after resize(); protected by RTNL */
- static struct callback_head *tnode_free_head;
- static size_t tnode_free_size;
-@@ -396,22 +394,13 @@ static inline int tnode_full(const struc
- return n && ((n->pos + n->bits) == tn->pos) && IS_TNODE(n);
- }
-
--static inline void put_child(struct tnode *tn, unsigned long i,
-- struct tnode *n)
--{
-- tnode_put_child_reorg(tn, i, n, -1);
--}
--
-- /*
-- * Add a child at position i overwriting the old value.
-- * Update the value of full_children and empty_children.
-- */
--
--static void tnode_put_child_reorg(struct tnode *tn, unsigned long i,
-- struct tnode *n, int wasfull)
-+/* Add a child at position i overwriting the old value.
-+ * Update the value of full_children and empty_children.
-+ */
-+static void put_child(struct tnode *tn, unsigned long i, struct tnode *n)
- {
- struct tnode *chi = rtnl_dereference(tn->child[i]);
-- int isfull;
-+ int isfull, wasfull;
-
- BUG_ON(i >= tnode_child_length(tn));
-
-@@ -422,10 +411,9 @@ static void tnode_put_child_reorg(struct
- tn->empty_children--;
-
- /* update fullChildren */
-- if (wasfull == -1)
-- wasfull = tnode_full(tn, chi);
--
-+ wasfull = tnode_full(tn, chi);
- isfull = tnode_full(tn, n);
-+
- if (wasfull && !isfull)
- tn->full_children--;
- else if (!wasfull && isfull)
-@@ -458,9 +446,10 @@ static void tnode_clean_free(struct tnod
- node_free(tn);
- }
-
--static struct tnode *inflate(struct trie *t, struct tnode *oldtnode)
-+static int inflate(struct trie *t, struct tnode *oldtnode)
- {
- unsigned long olen = tnode_child_length(oldtnode);
-+ struct tnode *tp = node_parent(oldtnode);
- struct tnode *tn;
- unsigned long i;
- t_key m;
-@@ -468,9 +457,8 @@ static struct tnode *inflate(struct trie
- pr_debug("In inflate\n");
-
- tn = tnode_new(oldtnode->key, oldtnode->pos - 1, oldtnode->bits + 1);
--
- if (!tn)
-- return ERR_PTR(-ENOMEM);
-+ return -ENOMEM;
-
- /*
- * Preallocate and store tnodes before the actual work so we
-@@ -564,30 +552,36 @@ static struct tnode *inflate(struct trie
- put_child(left, j, rtnl_dereference(inode->child[j]));
- put_child(right, j, rtnl_dereference(inode->child[j + size]));
- }
-- put_child(tn, 2*i, resize(t, left));
-- put_child(tn, 2*i+1, resize(t, right));
-+
-+ put_child(tn, 2 * i, left);
-+ put_child(tn, 2 * i + 1, right);
-
- tnode_free_safe(inode);
-+
-+ resize(t, left);
-+ resize(t, right);
- }
-+
-+ put_child_root(tp, t, tn->key, tn);
- tnode_free_safe(oldtnode);
-- return tn;
-+ return 0;
- nomem:
- tnode_clean_free(tn);
-- return ERR_PTR(-ENOMEM);
-+ return -ENOMEM;
- }
-
--static struct tnode *halve(struct trie *t, struct tnode *oldtnode)
-+static int halve(struct trie *t, struct tnode *oldtnode)
- {
- unsigned long olen = tnode_child_length(oldtnode);
-+ struct tnode *tp = node_parent(oldtnode);
- struct tnode *tn, *left, *right;
- int i;
-
- pr_debug("In halve\n");
-
- tn = tnode_new(oldtnode->key, oldtnode->pos + 1, oldtnode->bits - 1);
--
- if (!tn)
-- return ERR_PTR(-ENOMEM);
-+ return -ENOMEM;
-
- /*
- * Preallocate and store tnodes before the actual work so we
-@@ -606,8 +600,10 @@ static struct tnode *halve(struct trie *
-
- newn = tnode_new(left->key, oldtnode->pos, 1);
-
-- if (!newn)
-- goto nomem;
-+ if (!newn) {
-+ tnode_clean_free(tn);
-+ return -ENOMEM;
-+ }
-
- put_child(tn, i/2, newn);
- }
-@@ -635,16 +631,18 @@ static struct tnode *halve(struct trie *
-
- /* Two nonempty children */
- newBinNode = tnode_get_child(tn, i/2);
-- put_child(tn, i/2, NULL);
- put_child(newBinNode, 0, left);
- put_child(newBinNode, 1, right);
-- put_child(tn, i/2, resize(t, newBinNode));
-+
-+ put_child(tn, i / 2, newBinNode);
-+
-+ resize(t, newBinNode);
- }
-+
-+ put_child_root(tp, t, tn->key, tn);
- tnode_free_safe(oldtnode);
-- return tn;
--nomem:
-- tnode_clean_free(tn);
-- return ERR_PTR(-ENOMEM);
-+
-+ return 0;
- }
-
- /* From "Implementing a dynamic compressed trie" by Stefan Nilsson of
-@@ -704,45 +702,48 @@ nomem:
- * tnode_child_length(tn)
- *
- */
--static bool should_inflate(const struct tnode *tn)
-+static bool should_inflate(const struct tnode *tp, const struct tnode *tn)
- {
- unsigned long used = tnode_child_length(tn);
- unsigned long threshold = used;
-
- /* Keep root node larger */
-- threshold *= node_parent(tn) ? inflate_threshold :
-- inflate_threshold_root;
-+ threshold *= tp ? inflate_threshold : inflate_threshold_root;
- used += tn->full_children;
- used -= tn->empty_children;
-
- return tn->pos && ((50 * used) >= threshold);
- }
-
--static bool should_halve(const struct tnode *tn)
-+static bool should_halve(const struct tnode *tp, const struct tnode *tn)
- {
- unsigned long used = tnode_child_length(tn);
- unsigned long threshold = used;
-
- /* Keep root node larger */
-- threshold *= node_parent(tn) ? halve_threshold :
-- halve_threshold_root;
-+ threshold *= tp ? halve_threshold : halve_threshold_root;
- used -= tn->empty_children;
-
- return (tn->bits > 1) && ((100 * used) < threshold);
- }
-
- #define MAX_WORK 10
--static struct tnode *resize(struct trie *t, struct tnode *tn)
-+static void resize(struct trie *t, struct tnode *tn)
- {
-- struct tnode *old_tn, *n = NULL;
-+ struct tnode *tp = node_parent(tn), *n = NULL;
-+ struct tnode __rcu **cptr;
- int max_work;
-
-- if (!tn)
-- return NULL;
--
- pr_debug("In tnode_resize %p inflate_threshold=%d threshold=%d\n",
- tn, inflate_threshold, halve_threshold);
-
-+ /* track the tnode via the pointer from the parent instead of
-+ * doing it ourselves. This way we can let RCU fully do its
-+ * thing without us interfering
-+ */
-+ cptr = tp ? &tp->child[get_index(tn->key, tp)] : &t->trie;
-+ BUG_ON(tn != rtnl_dereference(*cptr));
-+
- /* No children */
- if (tn->empty_children > (tnode_child_length(tn) - 1))
- goto no_children;
-@@ -755,39 +756,35 @@ static struct tnode *resize(struct trie
- * nonempty nodes that are above the threshold.
- */
- max_work = MAX_WORK;
-- while (should_inflate(tn) && max_work--) {
-- old_tn = tn;
-- tn = inflate(t, tn);
--
-- if (IS_ERR(tn)) {
-- tn = old_tn;
-+ while (should_inflate(tp, tn) && max_work--) {
-+ if (inflate(t, tn)) {
- #ifdef CONFIG_IP_FIB_TRIE_STATS
- this_cpu_inc(t->stats->resize_node_skipped);
- #endif
- break;
- }
-+
-+ tn = rtnl_dereference(*cptr);
- }
-
- /* Return if at least one inflate is run */
- if (max_work != MAX_WORK)
-- return tn;
-+ return;
-
- /* Halve as long as the number of empty children in this
- * node is above threshold.
- */
- max_work = MAX_WORK;
-- while (should_halve(tn) && max_work--) {
-- old_tn = tn;
-- tn = halve(t, tn);
-- if (IS_ERR(tn)) {
-- tn = old_tn;
-+ while (should_halve(tp, tn) && max_work--) {
-+ if (halve(t, tn)) {
- #ifdef CONFIG_IP_FIB_TRIE_STATS
- this_cpu_inc(t->stats->resize_node_skipped);
- #endif
- break;
- }
-- }
-
-+ tn = rtnl_dereference(*cptr);
-+ }
-
- /* Only one child remains */
- if (tn->empty_children == (tnode_child_length(tn) - 1)) {
-@@ -797,11 +794,12 @@ one_child:
- n = tnode_get_child(tn, --i);
- no_children:
- /* compress one level */
-- node_set_parent(n, NULL);
-+ put_child_root(tp, t, tn->key, n);
-+ node_set_parent(n, tp);
-+
-+ /* drop dead node */
- tnode_free_safe(tn);
-- return n;
- }
-- return tn;
- }
-
- /* readside must use rcu_read_lock currently dump routines
-@@ -882,34 +880,19 @@ static struct tnode *fib_find_node(struc
-
- static void trie_rebalance(struct trie *t, struct tnode *tn)
- {
-- int wasfull;
-- t_key cindex, key;
- struct tnode *tp;
-
-- key = tn->key;
--
-- while (tn != NULL && (tp = node_parent(tn)) != NULL) {
-- cindex = get_index(key, tp);
-- wasfull = tnode_full(tp, tnode_get_child(tp, cindex));
-- tn = resize(t, tn);
--
-- tnode_put_child_reorg(tp, cindex, tn, wasfull);
--
-- tp = node_parent(tn);
-- if (!tp)
-- rcu_assign_pointer(t->trie, tn);
-+ while ((tp = node_parent(tn)) != NULL) {
-+ resize(t, tn);
-
- tnode_free_flush();
-- if (!tp)
-- break;
- tn = tp;
- }
-
- /* Handle last (top) tnode */
- if (IS_TNODE(tn))
-- tn = resize(t, tn);
-+ resize(t, tn);
-
-- rcu_assign_pointer(t->trie, tn);
- tnode_free_flush();
- }
-
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Wed, 31 Dec 2014 10:56:49 -0800
-Subject: [PATCH] fib_trie: Push tnode flushing down to inflate/halve
-
-This change pushes the tnode freeing down into the inflate and halve
-functions. It makes more sense here as we have a better grasp of what is
-going on and when a given cluster of nodes is ready to be freed.
-
-I believe this may address a bug in the freeing logic as well. For some
-reason if the freelist got to a certain size we would call
-synchronize_rcu(). I'm assuming that what they meant to do is call
-synchronize_rcu() after they had handed off that much memory via
-call_rcu(). As such that is what I have updated the behavior to be.
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -147,8 +147,6 @@ struct trie {
- };
-
- static void resize(struct trie *t, struct tnode *tn);
--/* tnodes to free after resize(); protected by RTNL */
--static struct callback_head *tnode_free_head;
- static size_t tnode_free_size;
-
- /*
-@@ -307,32 +305,6 @@ static struct tnode *tnode_alloc(size_t
- return vzalloc(size);
- }
-
--static void tnode_free_safe(struct tnode *tn)
--{
-- BUG_ON(IS_LEAF(tn));
-- tn->rcu.next = tnode_free_head;
-- tnode_free_head = &tn->rcu;
--}
--
--static void tnode_free_flush(void)
--{
-- struct callback_head *head;
--
-- while ((head = tnode_free_head)) {
-- struct tnode *tn = container_of(head, struct tnode, rcu);
--
-- tnode_free_head = head->next;
-- tnode_free_size += offsetof(struct tnode, child[1 << tn->bits]);
--
-- node_free(tn);
-- }
--
-- if (tnode_free_size >= PAGE_SIZE * sync_pages) {
-- tnode_free_size = 0;
-- synchronize_rcu();
-- }
--}
--
- static struct tnode *leaf_new(t_key key)
- {
- struct tnode *l = kmem_cache_alloc(trie_leaf_kmem, GFP_KERNEL);
-@@ -433,17 +405,33 @@ static void put_child_root(struct tnode
- rcu_assign_pointer(t->trie, n);
- }
-
--static void tnode_clean_free(struct tnode *tn)
-+static inline void tnode_free_init(struct tnode *tn)
- {
-- struct tnode *tofree;
-- unsigned long i;
-+ tn->rcu.next = NULL;
-+}
-+
-+static inline void tnode_free_append(struct tnode *tn, struct tnode *n)
-+{
-+ n->rcu.next = tn->rcu.next;
-+ tn->rcu.next = &n->rcu;
-+}
-
-- for (i = 0; i < tnode_child_length(tn); i++) {
-- tofree = tnode_get_child(tn, i);
-- if (tofree)
-- node_free(tofree);
-+static void tnode_free(struct tnode *tn)
-+{
-+ struct callback_head *head = &tn->rcu;
-+
-+ while (head) {
-+ head = head->next;
-+ tnode_free_size += offsetof(struct tnode, child[1 << tn->bits]);
-+ node_free(tn);
-+
-+ tn = container_of(head, struct tnode, rcu);
-+ }
-+
-+ if (tnode_free_size >= PAGE_SIZE * sync_pages) {
-+ tnode_free_size = 0;
-+ synchronize_rcu();
- }
-- node_free(tn);
- }
-
- static int inflate(struct trie *t, struct tnode *oldtnode)
-@@ -476,20 +464,23 @@ static int inflate(struct trie *t, struc
- inode->bits - 1);
- if (!left)
- goto nomem;
-+ tnode_free_append(tn, left);
-
- right = tnode_new(inode->key | m, inode->pos,
- inode->bits - 1);
-
-- if (!right) {
-- node_free(left);
-+ if (!right)
- goto nomem;
-- }
-+ tnode_free_append(tn, right);
-
- put_child(tn, 2*i, left);
- put_child(tn, 2*i+1, right);
- }
- }
-
-+ /* prepare oldtnode to be freed */
-+ tnode_free_init(oldtnode);
-+
- for (i = 0; i < olen; i++) {
- struct tnode *inode = tnode_get_child(oldtnode, i);
- struct tnode *left, *right;
-@@ -505,12 +496,13 @@ static int inflate(struct trie *t, struc
- continue;
- }
-
-+ /* drop the node in the old tnode free list */
-+ tnode_free_append(oldtnode, inode);
-+
- /* An internal node with two children */
- if (inode->bits == 1) {
- put_child(tn, 2*i, rtnl_dereference(inode->child[0]));
- put_child(tn, 2*i+1, rtnl_dereference(inode->child[1]));
--
-- tnode_free_safe(inode);
- continue;
- }
-
-@@ -556,17 +548,19 @@ static int inflate(struct trie *t, struc
- put_child(tn, 2 * i, left);
- put_child(tn, 2 * i + 1, right);
-
-- tnode_free_safe(inode);
--
-+ /* resize child nodes */
- resize(t, left);
- resize(t, right);
- }
-
- put_child_root(tp, t, tn->key, tn);
-- tnode_free_safe(oldtnode);
-+
-+ /* we completed without error, prepare to free old node */
-+ tnode_free(oldtnode);
- return 0;
- nomem:
-- tnode_clean_free(tn);
-+ /* all pointers should be clean so we are done */
-+ tnode_free(tn);
- return -ENOMEM;
- }
-
-@@ -599,17 +593,20 @@ static int halve(struct trie *t, struct
- struct tnode *newn;
-
- newn = tnode_new(left->key, oldtnode->pos, 1);
--
- if (!newn) {
-- tnode_clean_free(tn);
-+ tnode_free(tn);
- return -ENOMEM;
- }
-+ tnode_free_append(tn, newn);
-
- put_child(tn, i/2, newn);
- }
-
- }
-
-+ /* prepare oldtnode to be freed */
-+ tnode_free_init(oldtnode);
-+
- for (i = 0; i < olen; i += 2) {
- struct tnode *newBinNode;
-
-@@ -636,11 +633,14 @@ static int halve(struct trie *t, struct
-
- put_child(tn, i / 2, newBinNode);
-
-+ /* resize child node */
- resize(t, newBinNode);
- }
-
- put_child_root(tp, t, tn->key, tn);
-- tnode_free_safe(oldtnode);
-+
-+ /* all pointers should be clean so we are done */
-+ tnode_free(oldtnode);
-
- return 0;
- }
-@@ -798,7 +798,8 @@ no_children:
- node_set_parent(n, tp);
-
- /* drop dead node */
-- tnode_free_safe(tn);
-+ tnode_free_init(tn);
-+ tnode_free(tn);
- }
- }
-
-@@ -884,16 +885,12 @@ static void trie_rebalance(struct trie *
-
- while ((tp = node_parent(tn)) != NULL) {
- resize(t, tn);
--
-- tnode_free_flush();
- tn = tp;
- }
-
- /* Handle last (top) tnode */
- if (IS_TNODE(tn))
- resize(t, tn);
--
-- tnode_free_flush();
- }
-
- /* only used from updater-side */
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Wed, 31 Dec 2014 10:56:55 -0800
-Subject: [PATCH] fib_trie: inflate/halve nodes in a more RCU friendly
- way
-
-This change pulls the node_set_parent functionality out of put_child_reorg
-and instead leaves that to the function to take care of as well. By doing
-this we can fully construct the new cluster of tnodes and all of the
-pointers out of it before we start routing pointers into it.
-
-I am suspecting this will likely fix some concurency issues though I don't
-have a good test to show as such.
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -391,8 +391,6 @@ static void put_child(struct tnode *tn,
- else if (!wasfull && isfull)
- tn->full_children++;
-
-- node_set_parent(n, tn);
--
- rcu_assign_pointer(tn->child[i], n);
- }
-
-@@ -436,10 +434,8 @@ static void tnode_free(struct tnode *tn)
-
- static int inflate(struct trie *t, struct tnode *oldtnode)
- {
-- unsigned long olen = tnode_child_length(oldtnode);
-- struct tnode *tp = node_parent(oldtnode);
-- struct tnode *tn;
-- unsigned long i;
-+ struct tnode *inode, *node0, *node1, *tn, *tp;
-+ unsigned long i, j, k;
- t_key m;
-
- pr_debug("In inflate\n");
-@@ -448,43 +444,13 @@ static int inflate(struct trie *t, struc
- if (!tn)
- return -ENOMEM;
-
-- /*
-- * Preallocate and store tnodes before the actual work so we
-- * don't get into an inconsistent state if memory allocation
-- * fails. In case of failure we return the oldnode and inflate
-- * of tnode is ignored.
-+ /* Assemble all of the pointers in our cluster, in this case that
-+ * represents all of the pointers out of our allocated nodes that
-+ * point to existing tnodes and the links between our allocated
-+ * nodes.
- */
-- for (i = 0, m = 1u << tn->pos; i < olen; i++) {
-- struct tnode *inode = tnode_get_child(oldtnode, i);
--
-- if (tnode_full(oldtnode, inode) && (inode->bits > 1)) {
-- struct tnode *left, *right;
--
-- left = tnode_new(inode->key & ~m, inode->pos,
-- inode->bits - 1);
-- if (!left)
-- goto nomem;
-- tnode_free_append(tn, left);
--
-- right = tnode_new(inode->key | m, inode->pos,
-- inode->bits - 1);
--
-- if (!right)
-- goto nomem;
-- tnode_free_append(tn, right);
--
-- put_child(tn, 2*i, left);
-- put_child(tn, 2*i+1, right);
-- }
-- }
--
-- /* prepare oldtnode to be freed */
-- tnode_free_init(oldtnode);
--
-- for (i = 0; i < olen; i++) {
-- struct tnode *inode = tnode_get_child(oldtnode, i);
-- struct tnode *left, *right;
-- unsigned long size, j;
-+ for (i = tnode_child_length(oldtnode), m = 1u << tn->pos; i;) {
-+ inode = tnode_get_child(oldtnode, --i);
-
- /* An empty child */
- if (inode == NULL)
-@@ -496,65 +462,99 @@ static int inflate(struct trie *t, struc
- continue;
- }
-
-- /* drop the node in the old tnode free list */
-- tnode_free_append(oldtnode, inode);
--
- /* An internal node with two children */
- if (inode->bits == 1) {
-- put_child(tn, 2*i, rtnl_dereference(inode->child[0]));
-- put_child(tn, 2*i+1, rtnl_dereference(inode->child[1]));
-+ put_child(tn, 2 * i + 1, tnode_get_child(inode, 1));
-+ put_child(tn, 2 * i, tnode_get_child(inode, 0));
- continue;
- }
-
-- /* An internal node with more than two children */
--
- /* We will replace this node 'inode' with two new
-- * ones, 'left' and 'right', each with half of the
-+ * ones, 'node0' and 'node1', each with half of the
- * original children. The two new nodes will have
- * a position one bit further down the key and this
- * means that the "significant" part of their keys
- * (see the discussion near the top of this file)
- * will differ by one bit, which will be "0" in
-- * left's key and "1" in right's key. Since we are
-+ * node0's key and "1" in node1's key. Since we are
- * moving the key position by one step, the bit that
- * we are moving away from - the bit at position
-- * (inode->pos) - is the one that will differ between
-- * left and right. So... we synthesize that bit in the
-- * two new keys.
-- * The mask 'm' below will be a single "one" bit at
-- * the position (inode->pos)
-+ * (tn->pos) - is the one that will differ between
-+ * node0 and node1. So... we synthesize that bit in the
-+ * two new keys.
- */
-+ node1 = tnode_new(inode->key | m, inode->pos, inode->bits - 1);
-+ if (!node1)
-+ goto nomem;
-+ tnode_free_append(tn, node1);
-+
-+ node0 = tnode_new(inode->key & ~m, inode->pos, inode->bits - 1);
-+ if (!node0)
-+ goto nomem;
-+ tnode_free_append(tn, node0);
-+
-+ /* populate child pointers in new nodes */
-+ for (k = tnode_child_length(inode), j = k / 2; j;) {
-+ put_child(node1, --j, tnode_get_child(inode, --k));
-+ put_child(node0, j, tnode_get_child(inode, j));
-+ put_child(node1, --j, tnode_get_child(inode, --k));
-+ put_child(node0, j, tnode_get_child(inode, j));
-+ }
-+
-+ /* link new nodes to parent */
-+ NODE_INIT_PARENT(node1, tn);
-+ NODE_INIT_PARENT(node0, tn);
-+
-+ /* link parent to nodes */
-+ put_child(tn, 2 * i + 1, node1);
-+ put_child(tn, 2 * i, node0);
-+ }
-+
-+ /* setup the parent pointer into and out of this node */
-+ tp = node_parent(oldtnode);
-+ NODE_INIT_PARENT(tn, tp);
-+ put_child_root(tp, t, tn->key, tn);
-
-- /* Use the old key, but set the new significant
-- * bit to zero.
-- */
-+ /* prepare oldtnode to be freed */
-+ tnode_free_init(oldtnode);
-
-- left = tnode_get_child(tn, 2*i);
-- put_child(tn, 2*i, NULL);
-+ /* update all child nodes parent pointers to route to us */
-+ for (i = tnode_child_length(oldtnode); i;) {
-+ inode = tnode_get_child(oldtnode, --i);
-
-- BUG_ON(!left);
-+ /* A leaf or an internal node with skipped bits */
-+ if (!tnode_full(oldtnode, inode)) {
-+ node_set_parent(inode, tn);
-+ continue;
-+ }
-
-- right = tnode_get_child(tn, 2*i+1);
-- put_child(tn, 2*i+1, NULL);
-+ /* drop the node in the old tnode free list */
-+ tnode_free_append(oldtnode, inode);
-
-- BUG_ON(!right);
-+ /* fetch new nodes */
-+ node1 = tnode_get_child(tn, 2 * i + 1);
-+ node0 = tnode_get_child(tn, 2 * i);
-
-- size = tnode_child_length(left);
-- for (j = 0; j < size; j++) {
-- put_child(left, j, rtnl_dereference(inode->child[j]));
-- put_child(right, j, rtnl_dereference(inode->child[j + size]));
-+ /* bits == 1 then node0 and node1 represent inode's children */
-+ if (inode->bits == 1) {
-+ node_set_parent(node1, tn);
-+ node_set_parent(node0, tn);
-+ continue;
- }
-
-- put_child(tn, 2 * i, left);
-- put_child(tn, 2 * i + 1, right);
-+ /* update parent pointers in child node's children */
-+ for (k = tnode_child_length(inode), j = k / 2; j;) {
-+ node_set_parent(tnode_get_child(inode, --k), node1);
-+ node_set_parent(tnode_get_child(inode, --j), node0);
-+ node_set_parent(tnode_get_child(inode, --k), node1);
-+ node_set_parent(tnode_get_child(inode, --j), node0);
-+ }
-
- /* resize child nodes */
-- resize(t, left);
-- resize(t, right);
-+ resize(t, node1);
-+ resize(t, node0);
- }
-
-- put_child_root(tp, t, tn->key, tn);
--
- /* we completed without error, prepare to free old node */
- tnode_free(oldtnode);
- return 0;
-@@ -566,10 +566,8 @@ nomem:
-
- static int halve(struct trie *t, struct tnode *oldtnode)
- {
-- unsigned long olen = tnode_child_length(oldtnode);
-- struct tnode *tp = node_parent(oldtnode);
-- struct tnode *tn, *left, *right;
-- int i;
-+ struct tnode *tn, *tp, *inode, *node0, *node1;
-+ unsigned long i;
-
- pr_debug("In halve\n");
-
-@@ -577,68 +575,64 @@ static int halve(struct trie *t, struct
- if (!tn)
- return -ENOMEM;
-
-- /*
-- * Preallocate and store tnodes before the actual work so we
-- * don't get into an inconsistent state if memory allocation
-- * fails. In case of failure we return the oldnode and halve
-- * of tnode is ignored.
-+ /* Assemble all of the pointers in our cluster, in this case that
-+ * represents all of the pointers out of our allocated nodes that
-+ * point to existing tnodes and the links between our allocated
-+ * nodes.
- */
-+ for (i = tnode_child_length(oldtnode); i;) {
-+ node1 = tnode_get_child(oldtnode, --i);
-+ node0 = tnode_get_child(oldtnode, --i);
-
-- for (i = 0; i < olen; i += 2) {
-- left = tnode_get_child(oldtnode, i);
-- right = tnode_get_child(oldtnode, i+1);
-+ /* At least one of the children is empty */
-+ if (!node1 || !node0) {
-+ put_child(tn, i / 2, node1 ? : node0);
-+ continue;
-+ }
-
- /* Two nonempty children */
-- if (left && right) {
-- struct tnode *newn;
--
-- newn = tnode_new(left->key, oldtnode->pos, 1);
-- if (!newn) {
-- tnode_free(tn);
-- return -ENOMEM;
-- }
-- tnode_free_append(tn, newn);
--
-- put_child(tn, i/2, newn);
-+ inode = tnode_new(node0->key, oldtnode->pos, 1);
-+ if (!inode) {
-+ tnode_free(tn);
-+ return -ENOMEM;
- }
-+ tnode_free_append(tn, inode);
-
-+ /* initialize pointers out of node */
-+ put_child(inode, 1, node1);
-+ put_child(inode, 0, node0);
-+ NODE_INIT_PARENT(inode, tn);
-+
-+ /* link parent to node */
-+ put_child(tn, i / 2, inode);
- }
-
-+ /* setup the parent pointer out of and back into this node */
-+ tp = node_parent(oldtnode);
-+ NODE_INIT_PARENT(tn, tp);
-+ put_child_root(tp, t, tn->key, tn);
-+
- /* prepare oldtnode to be freed */
- tnode_free_init(oldtnode);
-
-- for (i = 0; i < olen; i += 2) {
-- struct tnode *newBinNode;
--
-- left = tnode_get_child(oldtnode, i);
-- right = tnode_get_child(oldtnode, i+1);
--
-- /* At least one of the children is empty */
-- if (left == NULL) {
-- if (right == NULL) /* Both are empty */
-- continue;
-- put_child(tn, i/2, right);
-- continue;
-- }
--
-- if (right == NULL) {
-- put_child(tn, i/2, left);
-+ /* update all of the child parent pointers */
-+ for (i = tnode_child_length(tn); i;) {
-+ inode = tnode_get_child(tn, --i);
-+
-+ /* only new tnodes will be considered "full" nodes */
-+ if (!tnode_full(tn, inode)) {
-+ node_set_parent(inode, tn);
- continue;
- }
-
- /* Two nonempty children */
-- newBinNode = tnode_get_child(tn, i/2);
-- put_child(newBinNode, 0, left);
-- put_child(newBinNode, 1, right);
--
-- put_child(tn, i / 2, newBinNode);
-+ node_set_parent(tnode_get_child(inode, 1), inode);
-+ node_set_parent(tnode_get_child(inode, 0), inode);
-
- /* resize child node */
-- resize(t, newBinNode);
-+ resize(t, inode);
- }
-
-- put_child_root(tp, t, tn->key, tn);
--
- /* all pointers should be clean so we are done */
- tnode_free(oldtnode);
-
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Wed, 31 Dec 2014 10:57:02 -0800
-Subject: [PATCH] fib_trie: Remove checks for index >= tnode_child_length
- from tnode_get_child
-
-For some reason the compiler doesn't seem to understand that when we are in
-a loop that runs from tnode_child_length - 1 to 0 we don't expect the value
-of tn->bits to change. As such every call to tnode_get_child was rerunning
-tnode_chile_length which ended up consuming quite a bit of space in the
-resultant assembly code.
-
-I have gone though and verified that in all cases where tnode_get_child
-is used we are either winding though a fixed loop from tnode_child_length -
-1 to 0, or are in a fastpath case where we are verifying the value by
-either checking for any remaining bits after shifting index by bits and
-testing for leaf, or by using tnode_child_length.
-
-size net/ipv4/fib_trie.o
-Before:
- text data bss dec hex filename
- 15506 376 8 15890 3e12 net/ipv4/fib_trie.o
-
-After:
- text data bss dec hex filename
- 14827 376 8 15211 3b6b net/ipv4/fib_trie.o
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -186,8 +186,6 @@ static inline unsigned long tnode_child_
- static inline struct tnode *tnode_get_child(const struct tnode *tn,
- unsigned long i)
- {
-- BUG_ON(i >= tnode_child_length(tn));
--
- return rtnl_dereference(tn->child[i]);
- }
-
-@@ -195,8 +193,6 @@ static inline struct tnode *tnode_get_ch
- static inline struct tnode *tnode_get_child_rcu(const struct tnode *tn,
- unsigned long i)
- {
-- BUG_ON(i >= tnode_child_length(tn));
--
- return rcu_dereference_rtnl(tn->child[i]);
- }
-
-@@ -371,7 +367,7 @@ static inline int tnode_full(const struc
- */
- static void put_child(struct tnode *tn, unsigned long i, struct tnode *n)
- {
-- struct tnode *chi = rtnl_dereference(tn->child[i]);
-+ struct tnode *chi = tnode_get_child(tn, i);
- int isfull, wasfull;
-
- BUG_ON(i >= tnode_child_length(tn));
-@@ -867,7 +863,7 @@ static struct tnode *fib_find_node(struc
- if (IS_LEAF(n))
- break;
-
-- n = rcu_dereference_rtnl(n->child[index]);
-+ n = tnode_get_child_rcu(n, index);
- }
-
- return n;
-@@ -934,7 +930,7 @@ static struct list_head *fib_insert_node
- }
-
- tp = n;
-- n = rcu_dereference_rtnl(n->child[index]);
-+ n = tnode_get_child_rcu(n, index);
- }
-
- l = leaf_new(key);
-@@ -1215,7 +1211,7 @@ int fib_table_lookup(struct fib_table *t
- cindex = index;
- }
-
-- n = rcu_dereference(n->child[index]);
-+ n = tnode_get_child_rcu(n, index);
- if (unlikely(!n))
- goto backtrace;
- }
-@@ -1835,7 +1831,7 @@ static void trie_collect_stats(struct tr
- if (n->bits < MAX_STAT_DEPTH)
- s->nodesizes[n->bits]++;
-
-- for (i = 0; i < tnode_child_length(n); i++) {
-+ for (i = tnode_child_length(n); i--;) {
- if (!rcu_access_pointer(n->child[i]))
- s->nullpointers++;
- }
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Wed, 31 Dec 2014 10:57:08 -0800
-Subject: [PATCH] fib_trie: Add tracking value for suffix length
-
-This change adds a tracking value for the maximum suffix length of all
-prefixes stored in any given tnode. With this value we can determine if we
-need to backtrace or not based on if the suffix is greater than the pos
-value.
-
-By doing this we can reduce the CPU overhead for lookups in the local table
-as many of the prefixes there are 32b long and have a suffix length of 0
-meaning we can immediately backtrace to the root node without needing to
-test any of the nodes between it and where we ended up.
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -96,6 +96,7 @@ struct tnode {
- t_key key;
- unsigned char bits; /* 2log(KEYLENGTH) bits needed */
- unsigned char pos; /* 2log(KEYLENGTH) bits needed */
-+ unsigned char slen;
- struct tnode __rcu *parent;
- struct rcu_head rcu;
- union {
-@@ -311,6 +312,7 @@ static struct tnode *leaf_new(t_key key)
- * as the nodes are searched
- */
- l->key = key;
-+ l->slen = 0;
- l->pos = 0;
- /* set bits to 0 indicating we are not a tnode */
- l->bits = 0;
-@@ -342,6 +344,7 @@ static struct tnode *tnode_new(t_key key
-
- if (tn) {
- tn->parent = NULL;
-+ tn->slen = pos;
- tn->pos = pos;
- tn->bits = bits;
- tn->key = (shift < KEYLENGTH) ? (key >> shift) << shift : 0;
-@@ -387,6 +390,9 @@ static void put_child(struct tnode *tn,
- else if (!wasfull && isfull)
- tn->full_children++;
-
-+ if (n && (tn->slen < n->slen))
-+ tn->slen = n->slen;
-+
- rcu_assign_pointer(tn->child[i], n);
- }
-
-@@ -635,6 +641,41 @@ static int halve(struct trie *t, struct
- return 0;
- }
-
-+static unsigned char update_suffix(struct tnode *tn)
-+{
-+ unsigned char slen = tn->pos;
-+ unsigned long stride, i;
-+
-+ /* search though the list of children looking for nodes that might
-+ * have a suffix greater than the one we currently have. This is
-+ * why we start with a stride of 2 since a stride of 1 would
-+ * represent the nodes with suffix length equal to tn->pos
-+ */
-+ for (i = 0, stride = 0x2ul ; i < tnode_child_length(tn); i += stride) {
-+ struct tnode *n = tnode_get_child(tn, i);
-+
-+ if (!n || (n->slen <= slen))
-+ continue;
-+
-+ /* update stride and slen based on new value */
-+ stride <<= (n->slen - slen);
-+ slen = n->slen;
-+ i &= ~(stride - 1);
-+
-+ /* if slen covers all but the last bit we can stop here
-+ * there will be nothing longer than that since only node
-+ * 0 and 1 << (bits - 1) could have that as their suffix
-+ * length.
-+ */
-+ if ((slen + 1) >= (tn->pos + tn->bits))
-+ break;
-+ }
-+
-+ tn->slen = slen;
-+
-+ return slen;
-+}
-+
- /* From "Implementing a dynamic compressed trie" by Stefan Nilsson of
- * the Helsinki University of Technology and Matti Tikkanen of Nokia
- * Telecommunications, page 6:
-@@ -790,6 +831,19 @@ no_children:
- /* drop dead node */
- tnode_free_init(tn);
- tnode_free(tn);
-+ return;
-+ }
-+
-+ /* Return if at least one deflate was run */
-+ if (max_work != MAX_WORK)
-+ return;
-+
-+ /* push the suffix length to the parent node */
-+ if (tn->slen > tn->pos) {
-+ unsigned char slen = update_suffix(tn);
-+
-+ if (tp && (slen > tp->slen))
-+ tp->slen = slen;
- }
- }
-
-@@ -818,8 +872,58 @@ static inline struct list_head *get_fa_h
- return &li->falh;
- }
-
--static void insert_leaf_info(struct hlist_head *head, struct leaf_info *new)
-+static void leaf_pull_suffix(struct tnode *l)
-+{
-+ struct tnode *tp = node_parent(l);
-+
-+ while (tp && (tp->slen > tp->pos) && (tp->slen > l->slen)) {
-+ if (update_suffix(tp) > l->slen)
-+ break;
-+ tp = node_parent(tp);
-+ }
-+}
-+
-+static void leaf_push_suffix(struct tnode *l)
-+{
-+ struct tnode *tn = node_parent(l);
-+
-+ /* if this is a new leaf then tn will be NULL and we can sort
-+ * out parent suffix lengths as a part of trie_rebalance
-+ */
-+ while (tn && (tn->slen < l->slen)) {
-+ tn->slen = l->slen;
-+ tn = node_parent(tn);
-+ }
-+}
-+
-+static void remove_leaf_info(struct tnode *l, struct leaf_info *old)
-+{
-+ struct hlist_node *prev;
-+
-+ /* record the location of the pointer to this object */
-+ prev = rtnl_dereference(hlist_pprev_rcu(&old->hlist));
-+
-+ /* remove the leaf info from the list */
-+ hlist_del_rcu(&old->hlist);
-+
-+ /* if we emptied the list this leaf will be freed and we can sort
-+ * out parent suffix lengths as a part of trie_rebalance
-+ */
-+ if (hlist_empty(&l->list))
-+ return;
-+
-+ /* if we removed the tail then we need to update slen */
-+ if (!rcu_access_pointer(hlist_next_rcu(prev))) {
-+ struct leaf_info *li = hlist_entry(prev, typeof(*li), hlist);
-+
-+ l->slen = KEYLENGTH - li->plen;
-+ leaf_pull_suffix(l);
-+ }
-+}
-+
-+static void insert_leaf_info(struct tnode *l, struct leaf_info *new)
- {
-+ struct hlist_head *head = &l->list;
- struct leaf_info *li = NULL, *last = NULL;
-
- if (hlist_empty(head)) {
-@@ -836,6 +940,12 @@ static void insert_leaf_info(struct hlis
- else
- hlist_add_before_rcu(&new->hlist, &li->hlist);
- }
-+
-+ /* if we added to the tail node then we need to update slen */
-+ if (!rcu_access_pointer(hlist_next_rcu(&new->hlist))) {
-+ l->slen = KEYLENGTH - new->plen;
-+ leaf_push_suffix(l);
-+ }
- }
-
- /* rcu_read_lock needs to be hold by caller from readside */
-@@ -925,7 +1035,7 @@ static struct list_head *fib_insert_node
- /* we have found a leaf. Prefixes have already been compared */
- if (IS_LEAF(n)) {
- /* Case 1: n is a leaf, and prefixes match*/
-- insert_leaf_info(&n->list, li);
-+ insert_leaf_info(n, li);
- return fa_head;
- }
-
-@@ -939,7 +1049,7 @@ static struct list_head *fib_insert_node
- return NULL;
- }
-
-- insert_leaf_info(&l->list, li);
-+ insert_leaf_info(l, li);
-
- /* Case 2: n is a LEAF or a TNODE and the key doesn't match.
- *
-@@ -1206,7 +1316,7 @@ int fib_table_lookup(struct fib_table *t
- /* only record pn and cindex if we are going to be chopping
- * bits later. Otherwise we are just wasting cycles.
- */
-- if (index) {
-+ if (n->slen > n->pos) {
- pn = n;
- cindex = index;
- }
-@@ -1225,7 +1335,7 @@ int fib_table_lookup(struct fib_table *t
- * between the key and the prefix exist in the region of
- * the lsb and higher in the prefix.
- */
-- if (unlikely(prefix_mismatch(key, n)))
-+ if (unlikely(prefix_mismatch(key, n)) || (n->slen == n->pos))
- goto backtrace;
-
- /* exit out and process leaf */
-@@ -1425,7 +1535,7 @@ int fib_table_delete(struct fib_table *t
- tb->tb_num_default--;
-
- if (list_empty(fa_head)) {
-- hlist_del_rcu(&li->hlist);
-+ remove_leaf_info(l, li);
- free_leaf_info(li);
- }
-
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Thu, 22 Jan 2015 15:51:08 -0800
-Subject: [PATCH] fib_trie: Use index & (~0ul << n->bits) instead of index >>
- n->bits
-
-In doing performance testing and analysis of the changes I recently found
-that by shifting the index I had created an unnecessary dependency.
-
-I have updated the code so that we instead shift a mask by bits and then
-just test against that as that should save us about 2 CPU cycles since we
-can generate the mask while the key and pos are being processed.
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -961,12 +961,12 @@ static struct tnode *fib_find_node(struc
- * prefix plus zeros for the bits in the cindex. The index
- * is the difference between the key and this value. From
- * this we can actually derive several pieces of data.
-- * if !(index >> bits)
-- * we know the value is cindex
-- * else
-+ * if (index & (~0ul << bits))
- * we have a mismatch in skip bits and failed
-+ * else
-+ * we know the value is cindex
- */
-- if (index >> n->bits)
-+ if (index & (~0ul << n->bits))
- return NULL;
-
- /* we have found a leaf. Prefixes have already been compared */
-@@ -1301,12 +1301,12 @@ int fib_table_lookup(struct fib_table *t
- * prefix plus zeros for the "bits" in the prefix. The index
- * is the difference between the key and this value. From
- * this we can actually derive several pieces of data.
-- * if !(index >> bits)
-- * we know the value is child index
-- * else
-+ * if (index & (~0ul << bits))
- * we have a mismatch in skip bits and failed
-+ * else
-+ * we know the value is cindex
- */
-- if (index >> n->bits)
-+ if (index & (~0ul << n->bits))
- break;
-
- /* we have found a leaf. Prefixes have already been compared */
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Thu, 22 Jan 2015 15:51:14 -0800
-Subject: [PATCH] fib_trie: Fix RCU bug and merge similar bits of inflate/halve
-
-This patch addresses two issues.
-
-The first issue is the fact that I believe I had the RCU freeing sequence
-slightly out of order. As a result we could get into an issue if a caller
-went into a child of a child of the new node, then backtraced into the to be
-freed parent, and then attempted to access a child of a child that may have
-been consumed in a resize of one of the new nodes children. To resolve this I
-have moved the resize after we have freed the oldtnode. The only side effect
-of this is that we will now be calling resize on more nodes in the case of
-inflate due to the fact that we don't have a good way to test to see if a
-full_tnode on the new node was there before or after the allocation. This
-should have minimal impact however since the node should already be
-correctly size so it is just the cost of calling should_inflate that we
-will be taking on the node which is only a couple of cycles.
-
-The second issue is the fact that inflate and halve were essentially doing
-the same thing after the new node was added to the trie replacing the old
-one. As such it wasn't really necessary to keep the code in both functions
-so I have split it out into two other functions, called replace and
-update_children.
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -396,8 +396,30 @@ static void put_child(struct tnode *tn,
- rcu_assign_pointer(tn->child[i], n);
- }
-
--static void put_child_root(struct tnode *tp, struct trie *t,
-- t_key key, struct tnode *n)
-+static void update_children(struct tnode *tn)
-+{
-+ unsigned long i;
-+
-+ /* update all of the child parent pointers */
-+ for (i = tnode_child_length(tn); i;) {
-+ struct tnode *inode = tnode_get_child(tn, --i);
-+
-+ if (!inode)
-+ continue;
-+
-+ /* Either update the children of a tnode that
-+ * already belongs to us or update the child
-+ * to point to ourselves.
-+ */
-+ if (node_parent(inode) == tn)
-+ update_children(inode);
-+ else
-+ node_set_parent(inode, tn);
-+ }
-+}
-+
-+static inline void put_child_root(struct tnode *tp, struct trie *t,
-+ t_key key, struct tnode *n)
- {
- if (tp)
- put_child(tp, get_index(key, tp), n);
-@@ -434,10 +456,35 @@ static void tnode_free(struct tnode *tn)
- }
- }
-
-+static void replace(struct trie *t, struct tnode *oldtnode, struct tnode *tn)
-+{
-+ struct tnode *tp = node_parent(oldtnode);
-+ unsigned long i;
-+
-+ /* setup the parent pointer out of and back into this node */
-+ NODE_INIT_PARENT(tn, tp);
-+ put_child_root(tp, t, tn->key, tn);
-+
-+ /* update all of the child parent pointers */
-+ update_children(tn);
-+
-+ /* all pointers should be clean so we are done */
-+ tnode_free(oldtnode);
-+
-+ /* resize children now that oldtnode is freed */
-+ for (i = tnode_child_length(tn); i;) {
-+ struct tnode *inode = tnode_get_child(tn, --i);
-+
-+ /* resize child node */
-+ if (tnode_full(tn, inode))
-+ resize(t, inode);
-+ }
-+}
-+
- static int inflate(struct trie *t, struct tnode *oldtnode)
- {
-- struct tnode *inode, *node0, *node1, *tn, *tp;
-- unsigned long i, j, k;
-+ struct tnode *tn;
-+ unsigned long i;
- t_key m;
-
- pr_debug("In inflate\n");
-@@ -446,13 +493,18 @@ static int inflate(struct trie *t, struc
- if (!tn)
- return -ENOMEM;
-
-+ /* prepare oldtnode to be freed */
-+ tnode_free_init(oldtnode);
-+
- /* Assemble all of the pointers in our cluster, in this case that
- * represents all of the pointers out of our allocated nodes that
- * point to existing tnodes and the links between our allocated
- * nodes.
- */
- for (i = tnode_child_length(oldtnode), m = 1u << tn->pos; i;) {
-- inode = tnode_get_child(oldtnode, --i);
-+ struct tnode *inode = tnode_get_child(oldtnode, --i);
-+ struct tnode *node0, *node1;
-+ unsigned long j, k;
-
- /* An empty child */
- if (inode == NULL)
-@@ -464,6 +516,9 @@ static int inflate(struct trie *t, struc
- continue;
- }
-
-+ /* drop the node in the old tnode free list */
-+ tnode_free_append(oldtnode, inode);
-+
- /* An internal node with two children */
- if (inode->bits == 1) {
- put_child(tn, 2 * i + 1, tnode_get_child(inode, 1));
-@@ -488,9 +543,9 @@ static int inflate(struct trie *t, struc
- node1 = tnode_new(inode->key | m, inode->pos, inode->bits - 1);
- if (!node1)
- goto nomem;
-- tnode_free_append(tn, node1);
-+ node0 = tnode_new(inode->key, inode->pos, inode->bits - 1);
-
-- node0 = tnode_new(inode->key & ~m, inode->pos, inode->bits - 1);
-+ tnode_free_append(tn, node1);
- if (!node0)
- goto nomem;
- tnode_free_append(tn, node0);
-@@ -512,53 +567,9 @@ static int inflate(struct trie *t, struc
- put_child(tn, 2 * i, node0);
- }
-
-- /* setup the parent pointer into and out of this node */
-- tp = node_parent(oldtnode);
-- NODE_INIT_PARENT(tn, tp);
-- put_child_root(tp, t, tn->key, tn);
-+ /* setup the parent pointers into and out of this node */
-+ replace(t, oldtnode, tn);
-
-- /* prepare oldtnode to be freed */
-- tnode_free_init(oldtnode);
--
-- /* update all child nodes parent pointers to route to us */
-- for (i = tnode_child_length(oldtnode); i;) {
-- inode = tnode_get_child(oldtnode, --i);
--
-- /* A leaf or an internal node with skipped bits */
-- if (!tnode_full(oldtnode, inode)) {
-- node_set_parent(inode, tn);
-- continue;
-- }
--
-- /* drop the node in the old tnode free list */
-- tnode_free_append(oldtnode, inode);
--
-- /* fetch new nodes */
-- node1 = tnode_get_child(tn, 2 * i + 1);
-- node0 = tnode_get_child(tn, 2 * i);
--
-- /* bits == 1 then node0 and node1 represent inode's children */
-- if (inode->bits == 1) {
-- node_set_parent(node1, tn);
-- node_set_parent(node0, tn);
-- continue;
-- }
--
-- /* update parent pointers in child node's children */
-- for (k = tnode_child_length(inode), j = k / 2; j;) {
-- node_set_parent(tnode_get_child(inode, --k), node1);
-- node_set_parent(tnode_get_child(inode, --j), node0);
-- node_set_parent(tnode_get_child(inode, --k), node1);
-- node_set_parent(tnode_get_child(inode, --j), node0);
-- }
--
-- /* resize child nodes */
-- resize(t, node1);
-- resize(t, node0);
-- }
--
-- /* we completed without error, prepare to free old node */
-- tnode_free(oldtnode);
- return 0;
- nomem:
- /* all pointers should be clean so we are done */
-@@ -568,7 +579,7 @@ nomem:
-
- static int halve(struct trie *t, struct tnode *oldtnode)
- {
-- struct tnode *tn, *tp, *inode, *node0, *node1;
-+ struct tnode *tn;
- unsigned long i;
-
- pr_debug("In halve\n");
-@@ -577,14 +588,18 @@ static int halve(struct trie *t, struct
- if (!tn)
- return -ENOMEM;
-
-+ /* prepare oldtnode to be freed */
-+ tnode_free_init(oldtnode);
-+
- /* Assemble all of the pointers in our cluster, in this case that
- * represents all of the pointers out of our allocated nodes that
- * point to existing tnodes and the links between our allocated
- * nodes.
- */
- for (i = tnode_child_length(oldtnode); i;) {
-- node1 = tnode_get_child(oldtnode, --i);
-- node0 = tnode_get_child(oldtnode, --i);
-+ struct tnode *node1 = tnode_get_child(oldtnode, --i);
-+ struct tnode *node0 = tnode_get_child(oldtnode, --i);
-+ struct tnode *inode;
-
- /* At least one of the children is empty */
- if (!node1 || !node0) {
-@@ -609,34 +624,8 @@ static int halve(struct trie *t, struct
- put_child(tn, i / 2, inode);
- }
-
-- /* setup the parent pointer out of and back into this node */
-- tp = node_parent(oldtnode);
-- NODE_INIT_PARENT(tn, tp);
-- put_child_root(tp, t, tn->key, tn);
--
-- /* prepare oldtnode to be freed */
-- tnode_free_init(oldtnode);
--
-- /* update all of the child parent pointers */
-- for (i = tnode_child_length(tn); i;) {
-- inode = tnode_get_child(tn, --i);
--
-- /* only new tnodes will be considered "full" nodes */
-- if (!tnode_full(tn, inode)) {
-- node_set_parent(inode, tn);
-- continue;
-- }
--
-- /* Two nonempty children */
-- node_set_parent(tnode_get_child(inode, 1), inode);
-- node_set_parent(tnode_get_child(inode, 0), inode);
--
-- /* resize child node */
-- resize(t, inode);
-- }
--
-- /* all pointers should be clean so we are done */
-- tnode_free(oldtnode);
-+ /* setup the parent pointers into and out of this node */
-+ replace(t, oldtnode, tn);
-
- return 0;
- }
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Thu, 22 Jan 2015 15:51:20 -0800
-Subject: [PATCH] fib_trie: Fall back to slen update on inflate/halve failure
-
-This change corrects an issue where if inflate or halve fails we were
-exiting the resize function without at least updating the slen for the
-node. To correct this I have moved the update of max_size into the while
-loop so that it is only decremented on a successful call to either inflate
-or halve.
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -752,7 +752,7 @@ static void resize(struct trie *t, struc
- {
- struct tnode *tp = node_parent(tn), *n = NULL;
- struct tnode __rcu **cptr;
-- int max_work;
-+ int max_work = MAX_WORK;
-
- pr_debug("In tnode_resize %p inflate_threshold=%d threshold=%d\n",
- tn, inflate_threshold, halve_threshold);
-@@ -775,8 +775,7 @@ static void resize(struct trie *t, struc
- /* Double as long as the resulting node has a number of
- * nonempty nodes that are above the threshold.
- */
-- max_work = MAX_WORK;
-- while (should_inflate(tp, tn) && max_work--) {
-+ while (should_inflate(tp, tn) && max_work) {
- if (inflate(t, tn)) {
- #ifdef CONFIG_IP_FIB_TRIE_STATS
- this_cpu_inc(t->stats->resize_node_skipped);
-@@ -784,6 +783,7 @@ static void resize(struct trie *t, struc
- break;
- }
-
-+ max_work--;
- tn = rtnl_dereference(*cptr);
- }
-
-@@ -794,8 +794,7 @@ static void resize(struct trie *t, struc
- /* Halve as long as the number of empty children in this
- * node is above threshold.
- */
-- max_work = MAX_WORK;
-- while (should_halve(tp, tn) && max_work--) {
-+ while (should_halve(tp, tn) && max_work) {
- if (halve(t, tn)) {
- #ifdef CONFIG_IP_FIB_TRIE_STATS
- this_cpu_inc(t->stats->resize_node_skipped);
-@@ -803,6 +802,7 @@ static void resize(struct trie *t, struc
- break;
- }
-
-+ max_work--;
- tn = rtnl_dereference(*cptr);
- }
-
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Thu, 22 Jan 2015 15:51:26 -0800
-Subject: [PATCH] fib_trie: Add collapse() and should_collapse() to resize
-
-This patch really does two things.
-
-First it pulls the logic for determining if we should collapse one node out
-of the tree and the actual code doing the collapse into a separate pair of
-functions. This helps to make the changes to these areas more readable.
-
-Second it encodes the upper 32b of the empty_children value onto the
-full_children value in the case of bits == KEYLENGTH. By doing this we are
-able to handle the case of a 32b node where empty_children would appear to
-be 0 when it was actually 1ul << 32.
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -83,7 +83,8 @@
-
- #define MAX_STAT_DEPTH 32
-
--#define KEYLENGTH (8*sizeof(t_key))
-+#define KEYLENGTH (8*sizeof(t_key))
-+#define KEY_MAX ((t_key)~0)
-
- typedef unsigned int t_key;
-
-@@ -102,8 +103,8 @@ struct tnode {
- union {
- /* The fields in this struct are valid if bits > 0 (TNODE) */
- struct {
-- unsigned int full_children; /* KEYLENGTH bits needed */
-- unsigned int empty_children; /* KEYLENGTH bits needed */
-+ t_key empty_children; /* KEYLENGTH bits needed */
-+ t_key full_children; /* KEYLENGTH bits needed */
- struct tnode __rcu *child[0];
- };
- /* This list pointer if valid if bits == 0 (LEAF) */
-@@ -302,6 +303,16 @@ static struct tnode *tnode_alloc(size_t
- return vzalloc(size);
- }
-
-+static inline void empty_child_inc(struct tnode *n)
-+{
-+ ++n->empty_children ? : ++n->full_children;
-+}
-+
-+static inline void empty_child_dec(struct tnode *n)
-+{
-+ n->empty_children-- ? : n->full_children--;
-+}
-+
- static struct tnode *leaf_new(t_key key)
- {
- struct tnode *l = kmem_cache_alloc(trie_leaf_kmem, GFP_KERNEL);
-@@ -335,7 +346,7 @@ static struct leaf_info *leaf_info_new(i
-
- static struct tnode *tnode_new(t_key key, int pos, int bits)
- {
-- size_t sz = offsetof(struct tnode, child[1 << bits]);
-+ size_t sz = offsetof(struct tnode, child[1ul << bits]);
- struct tnode *tn = tnode_alloc(sz);
- unsigned int shift = pos + bits;
-
-@@ -348,8 +359,10 @@ static struct tnode *tnode_new(t_key key
- tn->pos = pos;
- tn->bits = bits;
- tn->key = (shift < KEYLENGTH) ? (key >> shift) << shift : 0;
-- tn->full_children = 0;
-- tn->empty_children = 1<<bits;
-+ if (bits == KEYLENGTH)
-+ tn->full_children = 1;
-+ else
-+ tn->empty_children = 1ul << bits;
- }
-
- pr_debug("AT %p s=%zu %zu\n", tn, sizeof(struct tnode),
-@@ -375,11 +388,11 @@ static void put_child(struct tnode *tn,
-
- BUG_ON(i >= tnode_child_length(tn));
-
-- /* update emptyChildren */
-+ /* update emptyChildren, overflow into fullChildren */
- if (n == NULL && chi != NULL)
-- tn->empty_children++;
-- else if (n != NULL && chi == NULL)
-- tn->empty_children--;
-+ empty_child_inc(tn);
-+ if (n != NULL && chi == NULL)
-+ empty_child_dec(tn);
-
- /* update fullChildren */
- wasfull = tnode_full(tn, chi);
-@@ -630,6 +643,24 @@ static int halve(struct trie *t, struct
- return 0;
- }
-
-+static void collapse(struct trie *t, struct tnode *oldtnode)
-+{
-+ struct tnode *n, *tp;
-+ unsigned long i;
-+
-+ /* scan the tnode looking for that one child that might still exist */
-+ for (n = NULL, i = tnode_child_length(oldtnode); !n && i;)
-+ n = tnode_get_child(oldtnode, --i);
-+
-+ /* compress one level */
-+ tp = node_parent(oldtnode);
-+ put_child_root(tp, t, oldtnode->key, n);
-+ node_set_parent(n, tp);
-+
-+ /* drop dead node */
-+ node_free(oldtnode);
-+}
-+
- static unsigned char update_suffix(struct tnode *tn)
- {
- unsigned char slen = tn->pos;
-@@ -729,10 +760,12 @@ static bool should_inflate(const struct
-
- /* Keep root node larger */
- threshold *= tp ? inflate_threshold : inflate_threshold_root;
-- used += tn->full_children;
- used -= tn->empty_children;
-+ used += tn->full_children;
-
-- return tn->pos && ((50 * used) >= threshold);
-+ /* if bits == KEYLENGTH then pos = 0, and will fail below */
-+
-+ return (used > 1) && tn->pos && ((50 * used) >= threshold);
- }
-
- static bool should_halve(const struct tnode *tp, const struct tnode *tn)
-@@ -744,13 +777,29 @@ static bool should_halve(const struct tn
- threshold *= tp ? halve_threshold : halve_threshold_root;
- used -= tn->empty_children;
-
-- return (tn->bits > 1) && ((100 * used) < threshold);
-+ /* if bits == KEYLENGTH then used = 100% on wrap, and will fail below */
-+
-+ return (used > 1) && (tn->bits > 1) && ((100 * used) < threshold);
-+}
-+
-+static bool should_collapse(const struct tnode *tn)
-+{
-+ unsigned long used = tnode_child_length(tn);
-+
-+ used -= tn->empty_children;
-+
-+ /* account for bits == KEYLENGTH case */
-+ if ((tn->bits == KEYLENGTH) && tn->full_children)
-+ used -= KEY_MAX;
-+
-+ /* One child or none, time to drop us from the trie */
-+ return used < 2;
- }
-
- #define MAX_WORK 10
- static void resize(struct trie *t, struct tnode *tn)
- {
-- struct tnode *tp = node_parent(tn), *n = NULL;
-+ struct tnode *tp = node_parent(tn);
- struct tnode __rcu **cptr;
- int max_work = MAX_WORK;
-
-@@ -764,14 +813,6 @@ static void resize(struct trie *t, struc
- cptr = tp ? &tp->child[get_index(tn->key, tp)] : &t->trie;
- BUG_ON(tn != rtnl_dereference(*cptr));
-
-- /* No children */
-- if (tn->empty_children > (tnode_child_length(tn) - 1))
-- goto no_children;
--
-- /* One child */
-- if (tn->empty_children == (tnode_child_length(tn) - 1))
-- goto one_child;
--
- /* Double as long as the resulting node has a number of
- * nonempty nodes that are above the threshold.
- */
-@@ -807,19 +848,8 @@ static void resize(struct trie *t, struc
- }
-
- /* Only one child remains */
-- if (tn->empty_children == (tnode_child_length(tn) - 1)) {
-- unsigned long i;
--one_child:
-- for (i = tnode_child_length(tn); !n && i;)
-- n = tnode_get_child(tn, --i);
--no_children:
-- /* compress one level */
-- put_child_root(tp, t, tn->key, n);
-- node_set_parent(n, tp);
--
-- /* drop dead node */
-- tnode_free_init(tn);
-- tnode_free(tn);
-+ if (should_collapse(tn)) {
-+ collapse(t, tn);
- return;
- }
-
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Thu, 22 Jan 2015 15:51:33 -0800
-Subject: [PATCH] fib_trie: Use empty_children instead of counting empty nodes
- in stats collection
-
-It doesn't make much sense to count the pointers ourselves when
-empty_children already has a count for the number of NULL pointers stored
-in the tnode. As such save ourselves the cycles and just use
-empty_children.
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -1954,16 +1954,10 @@ static void trie_collect_stats(struct tr
- hlist_for_each_entry_rcu(li, &n->list, hlist)
- ++s->prefixes;
- } else {
-- unsigned long i;
--
- s->tnodes++;
- if (n->bits < MAX_STAT_DEPTH)
- s->nodesizes[n->bits]++;
--
-- for (i = tnode_child_length(n); i--;) {
-- if (!rcu_access_pointer(n->child[i]))
-- s->nullpointers++;
-- }
-+ s->nullpointers += n->empty_children;
- }
- }
- rcu_read_unlock();
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Thu, 22 Jan 2015 15:51:39 -0800
-Subject: [PATCH] fib_trie: Move fib_find_alias to file where it is used
-
-The function fib_find_alias is only accessed by functions in fib_trie.c as
-such it makes sense to relocate it and cast it as static so that the
-compiler can take advantage of optimizations it can do to it as a local
-function.
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/ipv4/fib_lookup.h
-+++ b/net/ipv4/fib_lookup.h
-@@ -32,7 +32,6 @@ int fib_dump_info(struct sk_buff *skb, u
- unsigned int);
- void rtmsg_fib(int event, __be32 key, struct fib_alias *fa, int dst_len,
- u32 tb_id, const struct nl_info *info, unsigned int nlm_flags);
--struct fib_alias *fib_find_alias(struct list_head *fah, u8 tos, u32 prio);
-
- static inline void fib_result_assign(struct fib_result *res,
- struct fib_info *fi)
---- a/net/ipv4/fib_semantics.c
-+++ b/net/ipv4/fib_semantics.c
-@@ -410,24 +410,6 @@ errout:
- rtnl_set_sk_err(info->nl_net, RTNLGRP_IPV4_ROUTE, err);
- }
-
--/* Return the first fib alias matching TOS with
-- * priority less than or equal to PRIO.
-- */
--struct fib_alias *fib_find_alias(struct list_head *fah, u8 tos, u32 prio)
--{
-- if (fah) {
-- struct fib_alias *fa;
-- list_for_each_entry(fa, fah, fa_list) {
-- if (fa->fa_tos > tos)
-- continue;
-- if (fa->fa_info->fib_priority >= prio ||
-- fa->fa_tos < tos)
-- return fa;
-- }
-- }
-- return NULL;
--}
--
- static int fib_detect_death(struct fib_info *fi, int order,
- struct fib_info **last_resort, int *last_idx,
- int dflt)
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -998,6 +998,26 @@ static struct tnode *fib_find_node(struc
- return n;
- }
-
-+/* Return the first fib alias matching TOS with
-+ * priority less than or equal to PRIO.
-+ */
-+static struct fib_alias *fib_find_alias(struct list_head *fah, u8 tos, u32 prio)
-+{
-+ struct fib_alias *fa;
-+
-+ if (!fah)
-+ return NULL;
-+
-+ list_for_each_entry(fa, fah, fa_list) {
-+ if (fa->fa_tos > tos)
-+ continue;
-+ if (fa->fa_info->fib_priority >= prio || fa->fa_tos < tos)
-+ return fa;
-+ }
-+
-+ return NULL;
-+}
-+
- static void trie_rebalance(struct trie *t, struct tnode *tn)
- {
- struct tnode *tp;
+++ /dev/null
-From: Alexander Duyck <alexander.h.duyck@redhat.com>
-Date: Thu, 22 Jan 2015 15:51:45 -0800
-Subject: [PATCH] fib_trie: Various clean-ups for handling slen
-
-While doing further work on the fib_trie I noted a few items.
-
-First I was using calls that were far more complicated than they needed to
-be for determining when to push/pull the suffix length. I have updated the
-code to reflect the simplier logic.
-
-The second issue is that I realised we weren't necessarily handling the
-case of a leaf_info struct surviving a flush. I have updated the logic so
-that now we will call pull_suffix in the event of having a leaf info value
-left in the leaf after flushing it.
-
-Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -917,27 +917,20 @@ static void leaf_push_suffix(struct tnod
-
- static void remove_leaf_info(struct tnode *l, struct leaf_info *old)
- {
-- struct hlist_node *prev;
--
-- /* record the location of the pointer to this object */
-- prev = rtnl_dereference(hlist_pprev_rcu(&old->hlist));
-+ /* record the location of the previous list_info entry */
-+ struct hlist_node **pprev = old->hlist.pprev;
-+ struct leaf_info *li = hlist_entry(pprev, typeof(*li), hlist.next);
-
- /* remove the leaf info from the list */
- hlist_del_rcu(&old->hlist);
-
-- /* if we emptied the list this leaf will be freed and we can sort
-- * out parent suffix lengths as a part of trie_rebalance
-- */
-- if (hlist_empty(&l->list))
-+ /* only access li if it is pointing at the last valid hlist_node */
-+ if (hlist_empty(&l->list) || (*pprev))
- return;
-
-- /* if we removed the tail then we need to update slen */
-- if (!rcu_access_pointer(hlist_next_rcu(prev))) {
-- struct leaf_info *li = hlist_entry(prev, typeof(*li), hlist);
--
-- l->slen = KEYLENGTH - li->plen;
-- leaf_pull_suffix(l);
-- }
-+ /* update the trie with the latest suffix length */
-+ l->slen = KEYLENGTH - li->plen;
-+ leaf_pull_suffix(l);
- }
-
- static void insert_leaf_info(struct tnode *l, struct leaf_info *new)
-@@ -961,7 +954,7 @@ static void insert_leaf_info(struct tnod
- }
-
- /* if we added to the tail node then we need to update slen */
-- if (!rcu_access_pointer(hlist_next_rcu(&new->hlist))) {
-+ if (l->slen < (KEYLENGTH - new->plen)) {
- l->slen = KEYLENGTH - new->plen;
- leaf_push_suffix(l);
- }
-@@ -1613,6 +1606,7 @@ static int trie_flush_leaf(struct tnode
- struct hlist_head *lih = &l->list;
- struct hlist_node *tmp;
- struct leaf_info *li = NULL;
-+ unsigned char plen = KEYLENGTH;
-
- hlist_for_each_entry_safe(li, tmp, lih, hlist) {
- found += trie_flush_list(&li->falh);
-@@ -1620,8 +1614,14 @@ static int trie_flush_leaf(struct tnode
- if (list_empty(&li->falh)) {
- hlist_del_rcu(&li->hlist);
- free_leaf_info(li);
-+ continue;
- }
-+
-+ plen = li->plen;
- }
-+
-+ l->slen = KEYLENGTH - plen;
-+
- return found;
- }
-
-@@ -1700,13 +1700,22 @@ int fib_table_flush(struct fib_table *tb
- for (l = trie_firstleaf(t); l; l = trie_nextleaf(l)) {
- found += trie_flush_leaf(l);
-
-- if (ll && hlist_empty(&ll->list))
-- trie_leaf_remove(t, ll);
-+ if (ll) {
-+ if (hlist_empty(&ll->list))
-+ trie_leaf_remove(t, ll);
-+ else
-+ leaf_pull_suffix(ll);
-+ }
-+
- ll = l;
- }
-
-- if (ll && hlist_empty(&ll->list))
-- trie_leaf_remove(t, ll);
-+ if (ll) {
-+ if (hlist_empty(&ll->list))
-+ trie_leaf_remove(t, ll);
-+ else
-+ leaf_pull_suffix(ll);
-+ }
-
- pr_debug("trie_flush found=%d\n", found);
- return found;
+++ /dev/null
-From: Simon Farnsworth <simon@farnz.org.uk>
-Date: Sun, 1 Mar 2015 10:54:39 +0000
-Subject: [PATCH] pppoe: Use workqueue to die properly when a PADT is received
-
-When a PADT frame is received, the socket may not be in a good state to
-close down the PPP interface. The current implementation handles this by
-simply blocking all further PPP traffic, and hoping that the lack of traffic
-will trigger the user to investigate.
-
-Use schedule_work to get to a process context from which we clear down the
-PPP interface, in a fashion analogous to hangup on a TTY-based PPP
-interface. This causes pppd to disconnect immediately, and allows tools to
-take immediate corrective action.
-
-Note that pppd's rp_pppoe.so plugin has code in it to disable the session
-when it disconnects; however, as a consequence of this patch, the session is
-already disabled before rp_pppoe.so is asked to disable the session. The
-result is a harmless error message:
-
-Failed to disconnect PPPoE socket: 114 Operation already in progress
-
-This message is safe to ignore, as long as the error is 114 Operation
-already in progress; in that specific case, it means that the PPPoE session
-has already been disabled before pppd tried to disable it.
-
-Signed-off-by: Simon Farnsworth <simon@farnz.org.uk>
-Tested-by: Dan Williams <dcbw@redhat.com>
-Tested-by: Christoph Schulz <develop@kristov.de>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/ppp/pppoe.c
-+++ b/drivers/net/ppp/pppoe.c
-@@ -454,6 +454,18 @@ out:
- return NET_RX_DROP;
- }
-
-+static void pppoe_unbind_sock_work(struct work_struct *work)
-+{
-+ struct pppox_sock *po = container_of(work, struct pppox_sock,
-+ proto.pppoe.padt_work);
-+ struct sock *sk = sk_pppox(po);
-+
-+ lock_sock(sk);
-+ pppox_unbind_sock(sk);
-+ release_sock(sk);
-+ sock_put(sk);
-+}
-+
- /************************************************************************
- *
- * Receive a PPPoE Discovery frame.
-@@ -499,7 +511,8 @@ static int pppoe_disc_rcv(struct sk_buff
- }
-
- bh_unlock_sock(sk);
-- sock_put(sk);
-+ if (!schedule_work(&po->proto.pppoe.padt_work))
-+ sock_put(sk);
- }
-
- abort:
-@@ -612,6 +625,8 @@ static int pppoe_connect(struct socket *
-
- lock_sock(sk);
-
-+ INIT_WORK(&po->proto.pppoe.padt_work, pppoe_unbind_sock_work);
-+
- error = -EINVAL;
- if (sp->sa_protocol != PX_PROTO_OE)
- goto end;
---- a/include/linux/if_pppox.h
-+++ b/include/linux/if_pppox.h
-@@ -19,6 +19,7 @@
- #include <linux/netdevice.h>
- #include <linux/ppp_channel.h>
- #include <linux/skbuff.h>
-+#include <linux/workqueue.h>
- #include <uapi/linux/if_pppox.h>
-
- static inline struct pppoe_hdr *pppoe_hdr(const struct sk_buff *skb)
-@@ -32,6 +33,7 @@ struct pppoe_opt {
- struct pppoe_addr pa; /* what this socket is bound to*/
- struct sockaddr_pppox relay; /* what socket data will be
- relayed to (PPPoE relaying) */
-+ struct work_struct padt_work;/* Work item for handling PADT */
- };
-
- struct pptp_opt {
+++ /dev/null
-From: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
-Date: Mon, 20 Apr 2015 21:07:48 +0200
-Subject: [PATCH] pppoe: Lacks DST MAC address check
-
-A pppoe session is identified by its session ID and MAC address.
-Currently pppoe does not check if the received pkg has the correct
-MAC address. This is a problem when the eth I/F is in promisc mode
-as then any DST MAC address is accepted.
-
-Signed-off-by: Joakim Tjernlund <joakim.tjernlund@transmode.se>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/ppp/pppoe.c
-+++ b/drivers/net/ppp/pppoe.c
-@@ -379,6 +379,9 @@ static int pppoe_rcv_core(struct sock *s
- * can't change.
- */
-
-+ if (skb->pkt_type == PACKET_OTHERHOST)
-+ goto abort_kfree;
-+
- if (sk->sk_state & PPPOX_BOUND) {
- ppp_input(&po->chan, skb);
- } else if (sk->sk_state & PPPOX_RELAY) {
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 9 May 2015 23:08:38 +0200
-Subject: [PATCH] pppoe: drop pppoe device in pppoe_unbind_sock_work
-
-After receiving a PADT and the socket is closed, user space will no
-longer drop the reference to the pppoe device.
-This leads to errors like this:
-
-[ 488.570000] unregister_netdevice: waiting for eth0.2 to become free. Usage count = 2
-
-Fixes: 287f3a943fe ("pppoe: Use workqueue to die properly when a PADT is received")
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/ppp/pppoe.c
-+++ b/drivers/net/ppp/pppoe.c
-@@ -464,6 +464,10 @@ static void pppoe_unbind_sock_work(struc
- struct sock *sk = sk_pppox(po);
-
- lock_sock(sk);
-+ if (po->pppoe_dev) {
-+ dev_put(po->pppoe_dev);
-+ po->pppoe_dev = NULL;
-+ }
- pppox_unbind_sock(sk);
- release_sock(sk);
- sock_put(sk);
+++ /dev/null
-From: Guillaume Nault <g.nault@alphalink.fr>
-Date: Thu, 19 Nov 2015 12:52:56 +0100
-Subject: [PATCH] ppp: don't set sk_state to PPPOX_ZOMBIE in pppoe_disc_rcv()
-
-Since 287f3a943fef ("pppoe: Use workqueue to die properly when a PADT
-is received"), pppoe_disc_rcv() disconnects the socket by scheduling
-pppoe_unbind_sock_work(). This is enough to stop socket transmission
-and makes the PPPOX_ZOMBIE state uncessary.
-
-Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/ppp/pppoe.c
-+++ b/drivers/net/ppp/pppoe.c
-@@ -500,27 +500,9 @@ static int pppoe_disc_rcv(struct sk_buff
-
- pn = pppoe_pernet(dev_net(dev));
- po = get_item(pn, ph->sid, eth_hdr(skb)->h_source, dev->ifindex);
-- if (po) {
-- struct sock *sk = sk_pppox(po);
--
-- bh_lock_sock(sk);
--
-- /* If the user has locked the socket, just ignore
-- * the packet. With the way two rcv protocols hook into
-- * one socket family type, we cannot (easily) distinguish
-- * what kind of SKB it is during backlog rcv.
-- */
-- if (sock_owned_by_user(sk) == 0) {
-- /* We're no longer connect at the PPPOE layer,
-- * and must wait for ppp channel to disconnect us.
-- */
-- sk->sk_state = PPPOX_ZOMBIE;
-- }
--
-- bh_unlock_sock(sk);
-+ if (po)
- if (!schedule_work(&po->proto.pppoe.padt_work))
-- sock_put(sk);
-- }
-+ sock_put(sk_pppox(po));
-
- abort:
- kfree_skb(skb);
+++ /dev/null
-From: Guillaume Nault <g.nault@alphalink.fr>
-Date: Thu, 19 Nov 2015 12:53:21 +0100
-Subject: [PATCH] ppp: remove PPPOX_ZOMBIE socket state
-
-PPPOX_ZOMBIE is never set anymore.
-
-Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/ppp/pppoe.c
-+++ b/drivers/net/ppp/pppoe.c
-@@ -311,7 +311,7 @@ static void pppoe_flush_dev(struct net_d
- lock_sock(sk);
-
- if (po->pppoe_dev == dev &&
-- sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND | PPPOX_ZOMBIE)) {
-+ sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) {
- pppox_unbind_sock(sk);
- sk->sk_state_change(sk);
- po->pppoe_dev = NULL;
-@@ -775,7 +775,7 @@ static int pppoe_ioctl(struct socket *so
- struct pppox_sock *relay_po;
-
- err = -EBUSY;
-- if (sk->sk_state & (PPPOX_BOUND | PPPOX_ZOMBIE | PPPOX_DEAD))
-+ if (sk->sk_state & (PPPOX_BOUND | PPPOX_DEAD))
- break;
-
- err = -ENOTCONN;
---- a/drivers/net/ppp/pppox.c
-+++ b/drivers/net/ppp/pppox.c
-@@ -58,7 +58,7 @@ void pppox_unbind_sock(struct sock *sk)
- {
- /* Clear connection to ppp device, if attached. */
-
-- if (sk->sk_state & (PPPOX_BOUND | PPPOX_CONNECTED | PPPOX_ZOMBIE)) {
-+ if (sk->sk_state & (PPPOX_BOUND | PPPOX_CONNECTED)) {
- ppp_unregister_channel(&pppox_sk(sk)->chan);
- sk->sk_state = PPPOX_DEAD;
- }
---- a/include/linux/if_pppox.h
-+++ b/include/linux/if_pppox.h
-@@ -91,7 +91,6 @@ enum {
- PPPOX_CONNECTED = 1, /* connection established ==TCP_ESTABLISHED */
- PPPOX_BOUND = 2, /* bound to ppp device */
- PPPOX_RELAY = 4, /* forwarding is enabled */
-- PPPOX_ZOMBIE = 8, /* dead, but still bound to ppp device */
- PPPOX_DEAD = 16 /* dead, useless, please clean me up!*/
- };
-
+++ /dev/null
-From: Guillaume Nault <g.nault@alphalink.fr>
-Date: Thu, 3 Dec 2015 16:49:32 +0100
-Subject: [PATCH] pppoe: fix memory corruption in padt work structure
-
-pppoe_connect() mustn't touch the padt_work field of pppoe sockets
-because that work could be already pending.
-
-[ 21.473147] BUG: unable to handle kernel NULL pointer dereference at 00000004
-[ 21.474523] IP: [<c1043177>] process_one_work+0x29/0x31c
-[ 21.475164] *pde = 00000000
-[ 21.475513] Oops: 0000 [#1] SMP
-[ 21.475910] Modules linked in: pppoe pppox ppp_generic slhc crc32c_intel aesni_intel virtio_net xts aes_i586 lrw gf128mul ablk_helper cryptd evdev acpi_cpufreq processor serio_raw button ext4 crc16 mbcache jbd2 virtio_blk virtio_pci virtio_ring virtio
-[ 21.476168] CPU: 2 PID: 164 Comm: kworker/2:2 Not tainted 4.4.0-rc1 #1
-[ 21.476168] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
-[ 21.476168] task: f5f83c00 ti: f5e28000 task.ti: f5e28000
-[ 21.476168] EIP: 0060:[<c1043177>] EFLAGS: 00010046 CPU: 2
-[ 21.476168] EIP is at process_one_work+0x29/0x31c
-[ 21.484082] EAX: 00000000 EBX: f678b2a0 ECX: 00000004 EDX: 00000000
-[ 21.484082] ESI: f6c69940 EDI: f5e29ef0 EBP: f5e29f0c ESP: f5e29edc
-[ 21.484082] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
-[ 21.484082] CR0: 80050033 CR2: 000000a4 CR3: 317ad000 CR4: 00040690
-[ 21.484082] Stack:
-[ 21.484082] 00000000 f6c69950 00000000 f6c69940 c0042338 f5e29f0c c1327945 00000000
-[ 21.484082] 00000008 f678b2a0 f6c69940 f678b2b8 f5e29f30 c1043984 f5f83c00 f6c69970
-[ 21.484082] f678b2a0 c10437d3 f6775e80 f678b2a0 c10437d3 f5e29fac c1047059 f5e29f74
-[ 21.484082] Call Trace:
-[ 21.484082] [<c1327945>] ? _raw_spin_lock_irq+0x28/0x30
-[ 21.484082] [<c1043984>] worker_thread+0x1b1/0x244
-[ 21.484082] [<c10437d3>] ? rescuer_thread+0x229/0x229
-[ 21.484082] [<c10437d3>] ? rescuer_thread+0x229/0x229
-[ 21.484082] [<c1047059>] kthread+0x8f/0x94
-[ 21.484082] [<c1327a32>] ? _raw_spin_unlock_irq+0x22/0x26
-[ 21.484082] [<c1327ee9>] ret_from_kernel_thread+0x21/0x38
-[ 21.484082] [<c1046fca>] ? kthread_parkme+0x19/0x19
-[ 21.496082] Code: 5d c3 55 89 e5 57 56 53 89 c3 83 ec 24 89 d0 89 55 e0 8d 7d e4 e8 6c d8 ff ff b9 04 00 00 00 89 45 d8 8b 43 24 89 45 dc 8b 45 d8 <8b> 40 04 8b 80 e0 00 00 00 c1 e8 05 24 01 88 45 d7 8b 45 e0 8d
-[ 21.496082] EIP: [<c1043177>] process_one_work+0x29/0x31c SS:ESP 0068:f5e29edc
-[ 21.496082] CR2: 0000000000000004
-[ 21.496082] ---[ end trace e362cc9cf10dae89 ]---
-
-Reported-by: Andrew <nitr0@seti.kr.ua>
-Fixes: 287f3a943fef ("pppoe: Use workqueue to die properly when a PADT is received")
-Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/ppp/pppoe.c
-+++ b/drivers/net/ppp/pppoe.c
-@@ -550,6 +550,9 @@ static int pppoe_create(struct net *net,
- sk->sk_family = PF_PPPOX;
- sk->sk_protocol = PX_PROTO_OE;
-
-+ INIT_WORK(&pppox_sk(sk)->proto.pppoe.padt_work,
-+ pppoe_unbind_sock_work);
-+
- return 0;
- }
-
-@@ -614,8 +617,6 @@ static int pppoe_connect(struct socket *
-
- lock_sock(sk);
-
-- INIT_WORK(&po->proto.pppoe.padt_work, pppoe_unbind_sock_work);
--
- error = -EINVAL;
- if (sp->sa_protocol != PX_PROTO_OE)
- goto end;
-@@ -645,8 +646,13 @@ static int pppoe_connect(struct socket *
- po->pppoe_dev = NULL;
- }
-
-- memset(sk_pppox(po) + 1, 0,
-- sizeof(struct pppox_sock) - sizeof(struct sock));
-+ po->pppoe_ifindex = 0;
-+ memset(&po->pppoe_pa, 0, sizeof(po->pppoe_pa));
-+ memset(&po->pppoe_relay, 0, sizeof(po->pppoe_relay));
-+ memset(&po->chan, 0, sizeof(po->chan));
-+ po->next = NULL;
-+ po->num = 0;
-+
- sk->sk_state = PPPOX_NONE;
- }
-
+++ /dev/null
-From: Florian Westphal <fw@strlen.de>
-Date: Thu, 17 Sep 2015 11:24:48 +0100
-Subject: [PATCH] ipv6: ip6_fragment: fix headroom tests and skb leak
-
-David Woodhouse reports skb_under_panic when we try to push ethernet
-header to fragmented ipv6 skbs:
-
- skbuff: skb_under_panic: text:c1277f1e len:1294 put:14 head:dec98000
- data:dec97ffc tail:0xdec9850a end:0xdec98f40 dev:br-lan
-[..]
-ip6_finish_output2+0x196/0x4da
-
-David further debugged this:
- [..] offending fragments were arriving here with skb_headroom(skb)==10.
- Which is reasonable, being the Solos ADSL card's header of 8 bytes
- followed by 2 bytes of PPP frame type.
-
-The problem is that if netfilter ipv6 defragmentation is used, skb_cow()
-in ip6_forward will only see reassembled skb.
-
-Therefore, headroom is overestimated by 8 bytes (we pulled fragment
-header) and we don't check the skbs in the frag_list either.
-
-We can't do these checks in netfilter defrag since outdev isn't known yet.
-
-Furthermore, existing tests in ip6_fragment did not consider the fragment
-or ipv6 header size when checking headroom of the fraglist skbs.
-
-While at it, also fix a skb leak on memory allocation -- ip6_fragment
-must consume the skb.
-
-I tested this e1000 driver hacked to not allocate additional headroom
-(we end up in slowpath, since LL_RESERVED_SPACE is 16).
-
-If 2 bytes of headroom are allocated, fastpath is taken (14 byte
-ethernet header was pulled, so 16 byte headroom available in all
-fragments).
-
-Reported-by: David Woodhouse <dwmw2@infradead.org>
-Diagnosed-by: David Woodhouse <dwmw2@infradead.org>
-Signed-off-by: Florian Westphal <fw@strlen.de>
-Closes 20532
----
-
---- a/net/ipv6/ip6_output.c
-+++ b/net/ipv6/ip6_output.c
-@@ -600,20 +600,22 @@ int ip6_fragment(struct sk_buff *skb, in
- }
- mtu -= hlen + sizeof(struct frag_hdr);
-
-+ hroom = LL_RESERVED_SPACE(rt->dst.dev);
- if (skb_has_frag_list(skb)) {
- int first_len = skb_pagelen(skb);
- struct sk_buff *frag2;
-
- if (first_len - hlen > mtu ||
- ((first_len - hlen) & 7) ||
-- skb_cloned(skb))
-+ skb_cloned(skb) ||
-+ skb_headroom(skb) < (hroom + sizeof(struct frag_hdr)))
- goto slow_path;
-
- skb_walk_frags(skb, frag) {
- /* Correct geometry. */
- if (frag->len > mtu ||
- ((frag->len & 7) && frag->next) ||
-- skb_headroom(frag) < hlen)
-+ skb_headroom(frag) < (hlen + hroom + sizeof(struct frag_hdr)))
- goto slow_path_clean;
-
- /* Partially cloned skb? */
-@@ -630,8 +632,6 @@ int ip6_fragment(struct sk_buff *skb, in
-
- err = 0;
- offset = 0;
-- frag = skb_shinfo(skb)->frag_list;
-- skb_frag_list_init(skb);
- /* BUILD HEADER */
-
- *prevhdr = NEXTHDR_FRAGMENT;
-@@ -639,8 +639,11 @@ int ip6_fragment(struct sk_buff *skb, in
- if (!tmp_hdr) {
- IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
- IPSTATS_MIB_FRAGFAILS);
-- return -ENOMEM;
-+ err = -ENOMEM;
-+ goto fail;
- }
-+ frag = skb_shinfo(skb)->frag_list;
-+ skb_frag_list_init(skb);
-
- __skb_pull(skb, hlen);
- fh = (struct frag_hdr *)__skb_push(skb, sizeof(struct frag_hdr));
-@@ -738,7 +741,6 @@ slow_path:
- */
-
- *prevhdr = NEXTHDR_FRAGMENT;
-- hroom = LL_RESERVED_SPACE(rt->dst.dev);
- troom = rt->dst.dev->needed_tailroom;
-
- /*
+++ /dev/null
-From: David Woodhouse <dwmw2@infradead.org>
-Date: Thu, 17 Sep 2015 11:19:53 +0100
-Subject: [PATCH] solos-pci: Increase headroom on received packets
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-A comment in include/linux/skbuff.h says that:
-
- * Various parts of the networking layer expect at least 32 bytes of
- * headroom, you should not reduce this.
-
-This was demonstrated by a panic when handling fragmented IPv6 packets:
-http://marc.info/?l=linux-netdev&m=144236093519172&w=2
-
-It's not entirely clear if that comment is still valid — and if it is,
-perhaps netif_rx() ought to be enforcing it with a warning.
-
-But either way, it is rather stupid from a performance point of view
-for us to be receiving packets into a buffer which doesn't have enough
-room to prepend an Ethernet header — it means that *every* incoming
-packet is going to be need to be reallocated. So let's fix that.
-
-Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
----
-
---- a/drivers/atm/solos-pci.c
-+++ b/drivers/atm/solos-pci.c
-@@ -805,7 +805,12 @@ static void solos_bh(unsigned long card_
- continue;
- }
-
-- skb = alloc_skb(size + 1, GFP_ATOMIC);
-+ /* Use netdev_alloc_skb() because it adds NET_SKB_PAD of
-+ * headroom, and ensures we can route packets back out an
-+ * Ethernet interface (for example) without having to
-+ * reallocate. Adding NET_IP_ALIGN also ensures that both
-+ * PPPoATM and PPPoEoBR2684 packets end up aligned. */
-+ skb = netdev_alloc_skb_ip_align(NULL, size + 1);
- if (!skb) {
- if (net_ratelimit())
- dev_warn(&card->dev->dev, "Failed to allocate sk_buff for RX\n");
-@@ -869,7 +874,10 @@ static void solos_bh(unsigned long card_
- /* Allocate RX skbs for any ports which need them */
- if (card->using_dma && card->atmdev[port] &&
- !card->rx_skb[port]) {
-- struct sk_buff *skb = alloc_skb(RX_DMA_SIZE, GFP_ATOMIC);
-+ /* Unlike the MMIO case (qv) we can't add NET_IP_ALIGN
-+ * here; the FPGA can only DMA to addresses which are
-+ * aligned to 4 bytes. */
-+ struct sk_buff *skb = dev_alloc_skb(RX_DMA_SIZE);
- if (skb) {
- SKB_CB(skb)->dma_addr =
- pci_map_single(card->dev, skb->data,
+++ /dev/null
-From de88e9b0354c2e3ff8eae3f97afe43a34f5ed239 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 13 May 2017 13:03:21 +0200
-Subject: [PATCH] regmap: make LZO cache optional
-
-Commit 2cbbb579bcbe3 ("regmap: Add the LZO cache support") added support
-for LZO compression in regcache, but there were never any users added
-afterwards. Since LZO support itself has its own size, it currently is
-rather a deoptimization.
-
-So make it optional by introducing a symbol that can be selected by
-drivers wanting to make use of it.
-
-Saves e.g. ~46 kB on MIPS (size of LZO support + regcache LZO code).
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
-I tried using google to find any users (even out-of-tree ones), but at
-best I found a single driver submission that was switched to RBTREE in
-subsequent resubmissions (MFD_SMSC).
-
-One could maybe also just drop the code because of no users for 5 years,
-but that would be up to the maintainer(s) to decide.
-
- drivers/base/regmap/Kconfig | 5 ++++-
- drivers/base/regmap/Makefile | 3 ++-
- drivers/base/regmap/regcache.c | 2 ++
- 3 files changed, 8 insertions(+), 2 deletions(-)
-
---- a/drivers/base/regmap/Kconfig
-+++ b/drivers/base/regmap/Kconfig
-@@ -4,9 +4,12 @@
-
- config REGMAP
- default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_MMIO || REGMAP_IRQ)
-+ select IRQ_DOMAIN if REGMAP_IRQ
-+ bool
-+
-+config REGCACHE_COMPRESSED
- select LZO_COMPRESS
- select LZO_DECOMPRESS
-- select IRQ_DOMAIN if REGMAP_IRQ
- bool
-
- config REGMAP_I2C
---- a/drivers/base/regmap/Makefile
-+++ b/drivers/base/regmap/Makefile
-@@ -1,5 +1,6 @@
- obj-$(CONFIG_REGMAP) += regmap.o regcache.o
--obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-lzo.o regcache-flat.o
-+obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-flat.o
-+obj-$(CONFIG_REGCACHE_COMPRESSED) += regcache-lzo.o
- obj-$(CONFIG_DEBUG_FS) += regmap-debugfs.o
- obj-$(CONFIG_REGMAP_I2C) += regmap-i2c.o
- obj-$(CONFIG_REGMAP_SPI) += regmap-spi.o
---- a/drivers/base/regmap/regcache.c
-+++ b/drivers/base/regmap/regcache.c
-@@ -21,7 +21,9 @@
-
- static const struct regcache_ops *cache_types[] = {
- ®cache_rbtree_ops,
-+#if IS_ENABLED(CONFIG_REGCACHE_COMPRESSED)
- ®cache_lzo_ops,
-+#endif
- ®cache_flat_ops,
- };
-
+++ /dev/null
-[linux-unionfs added to Cc]
-
-On Tue, May 19, 2015 at 09:51:20AM +0200, Bastian Bittorf wrote:
-> Hi Miklos,
->
-> sorry for writing directly to you, feel free to forward
-> this to the appropriate mailinglist.
->
-> we have a problem with mainline overlay filesystem on kernel 3.18:
-> https://dev.openwrt.org/ticket/19564
->
-> 2 things are odd:
-> when the working filesystem is full, overlays fails with:
->
-> overlayfs: failed to create directory /overlay/work/work
->
-> what is strange, that we call it with:
->
-> mount(overlay, "/mnt", "overlay", MS_NOATIME, lowerdir)
->
-> see here:
-> http://nbd.name/gitweb.cgi?p=fstools.git;a=blob;f=libfstools/mount.c;h=81176ce399b4cd8e2d347c0008c13dec92407f55;hb=e6004000ff15d7bd32cf5663e8690fc94d7ec747#l125
->
-> do you have an idea whats wrong?
-> 1) is it really needed, that we need space for creating dir "/overlay/work"?
-> 2) why does overlay need "/overlay/work/work"?
-
-The work directory is needed for atomic copy-up and similar. It is not actually
-necessary to mount a read-only overlay. Post 4.0 it is possible to mount the
-overlay without workdir (but even then it won't happen automatically in case the
-upper fs is full, so this should be fixed in the latest kernel too).
-
-Could you please try the following patch? If the workdir can't be created it
-will fall back to mounting the overlay read-only.
-
-Thanks,
-Miklos
-
----
- fs/overlayfs/copy_up.c | 3 +++
- fs/overlayfs/dir.c | 9 +++++++++
- fs/overlayfs/super.c | 12 +++++++++---
- 3 files changed, 21 insertions(+), 3 deletions(-)
-
---- a/fs/overlayfs/copy_up.c
-+++ b/fs/overlayfs/copy_up.c
-@@ -315,6 +315,9 @@ int ovl_copy_up_one(struct dentry *paren
- struct cred *override_cred;
- char *link = NULL;
-
-+ if (WARN_ON(!workdir))
-+ return -EROFS;
-+
- ovl_path_upper(parent, &parentpath);
- upperdir = parentpath.dentry;
-
---- a/fs/overlayfs/dir.c
-+++ b/fs/overlayfs/dir.c
-@@ -222,6 +222,9 @@ static struct dentry *ovl_clear_empty(st
- struct kstat stat;
- int err;
-
-+ if (WARN_ON(!workdir))
-+ return ERR_PTR(-EROFS);
-+
- err = ovl_lock_rename_workdir(workdir, upperdir);
- if (err)
- goto out;
-@@ -322,6 +325,9 @@ static int ovl_create_over_whiteout(stru
- struct dentry *newdentry;
- int err;
-
-+ if (WARN_ON(!workdir))
-+ return -EROFS;
-+
- err = ovl_lock_rename_workdir(workdir, upperdir);
- if (err)
- goto out;
-@@ -507,6 +513,9 @@ static int ovl_remove_and_whiteout(struc
- int err;
- int flags = 0;
-
-+ if (WARN_ON(!workdir))
-+ return -EROFS;
-+
- if (is_dir) {
- opaquedir = ovl_check_empty_and_clear(dentry);
- err = PTR_ERR(opaquedir);
---- a/fs/overlayfs/super.c
-+++ b/fs/overlayfs/super.c
-@@ -760,9 +760,15 @@ static int ovl_fill_super(struct super_b
- ufs->workdir = ovl_workdir_create(ufs->upper_mnt, workpath.dentry);
- err = PTR_ERR(ufs->workdir);
- if (IS_ERR(ufs->workdir)) {
-- pr_err("overlayfs: failed to create directory %s/%s\n",
-- ufs->config.workdir, OVL_WORKDIR_NAME);
-- goto out_put_lower_mnt;
-+ if (err == -ENOSPC || err == -EROFS) {
-+ pr_warning("overlayfs: failed to create work directory (%s), mounting read-only\n", err == ENOSPC ? "ENOSPC" : "EROFS");
-+ sb->s_flags |= MS_RDONLY;
-+ ufs->workdir = NULL;
-+ } else {
-+ pr_err("overlayfs: failed to create directory %s/%s\n",
-+ ufs->config.workdir, OVL_WORKDIR_NAME);
-+ goto out_put_lower_mnt;
-+ }
- }
-
- /*
+++ /dev/null
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -567,6 +567,7 @@ static const struct spi_device_id spi_no
- { "s25fl008k", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
- { "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32, SECT_4K) },
- { "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
-+ { "s25fl164k", INFO(0x014017, 0, 64 * 1024, 128, SECT_4K) },
-
- /* SST -- large erase sizes are "overlays", "sectors" are 4K */
- { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) },
+++ /dev/null
-From: Mark Brown <broonie@kernel.org>
-Date: Tue, 9 Dec 2014 19:46:56 +0000
-Subject: [PATCH] spi: Check to see if the device is processing a message
- before we idle
-
-cur_msg is updated under the queue lock and holds the message we are
-currently processing. Since currently we only ever do removals in the
-pump kthread it doesn't matter in what order we do things but we want
-to be able to push things out from the submitting thread so pull the
-check to see if we're currently handling a message before we check to
-see if the queue is idle.
-
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
-
---- a/drivers/spi/spi.c
-+++ b/drivers/spi/spi.c
-@@ -891,8 +891,16 @@ static void spi_pump_messages(struct kth
- bool was_busy = false;
- int ret;
-
-- /* Lock queue and check for queue work */
-+ /* Lock queue */
- spin_lock_irqsave(&master->queue_lock, flags);
-+
-+ /* Make sure we are not already running a message */
-+ if (master->cur_msg) {
-+ spin_unlock_irqrestore(&master->queue_lock, flags);
-+ return;
-+ }
-+
-+ /* Check if the queue is idle */
- if (list_empty(&master->queue) || !master->running) {
- if (!master->busy) {
- spin_unlock_irqrestore(&master->queue_lock, flags);
-@@ -916,11 +924,6 @@ static void spi_pump_messages(struct kth
- return;
- }
-
-- /* Make sure we are not already running a message */
-- if (master->cur_msg) {
-- spin_unlock_irqrestore(&master->queue_lock, flags);
-- return;
-- }
- /* Extract head of queue */
- master->cur_msg =
- list_first_entry(&master->queue, struct spi_message, queue);
+++ /dev/null
-From: Mark Brown <broonie@kernel.org>
-Date: Tue, 9 Dec 2014 21:38:05 +0000
-Subject: [PATCH] spi: Pump transfers inside calling context for spi_sync()
-
-If we are using the standard SPI message pump (which all drivers should be
-transitioning over to) then special case the message enqueue and instead of
-starting the worker thread to push messages to the hardware do so in the
-context of the caller if the controller is idle. This avoids a context
-switch in the common case where the controller has a single user in a
-single thread, for short PIO transfers there may be no need to context
-switch away from the calling context to complete the transfer.
-
-The code is a bit more complex than is desirable in part due to the need
-to handle drivers not using the standard queue and in part due to handling
-the various combinations of bus locking and asynchronous submission in
-interrupt context.
-
-It is still suboptimal since it will still wake the message pump for each
-transfer in order to schedule idling of the hardware and if multiple
-contexts are using the controller simultaneously a caller may end up
-pumping a message for some random other thread rather than for itself,
-and if the thread ends up deferring due to another context idling the
-hardware then it will just busy wait. It can, however, have the benefit
-of aggregating power up and down of the hardware when a caller performs
-a series of transfers back to back without any need for the use of
-spi_async().
-
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
-
---- a/drivers/spi/spi.c
-+++ b/drivers/spi/spi.c
-@@ -882,6 +882,9 @@ EXPORT_SYMBOL_GPL(spi_finalize_current_t
- * needs processing and if so call out to the driver to initialize hardware
- * and transfer each message.
- *
-+ * Note that it is called both from the kthread itself and also from
-+ * inside spi_sync(); the queue extraction handling at the top of the
-+ * function should deal with this safely.
- */
- static void spi_pump_messages(struct kthread_work *work)
- {
-@@ -900,6 +903,13 @@ static void spi_pump_messages(struct kth
- return;
- }
-
-+ /* If another context is idling the device then defer */
-+ if (master->idling) {
-+ queue_kthread_work(&master->kworker, &master->pump_messages);
-+ spin_unlock_irqrestore(&master->queue_lock, flags);
-+ return;
-+ }
-+
- /* Check if the queue is idle */
- if (list_empty(&master->queue) || !master->running) {
- if (!master->busy) {
-@@ -907,7 +917,9 @@ static void spi_pump_messages(struct kth
- return;
- }
- master->busy = false;
-+ master->idling = true;
- spin_unlock_irqrestore(&master->queue_lock, flags);
-+
- kfree(master->dummy_rx);
- master->dummy_rx = NULL;
- kfree(master->dummy_tx);
-@@ -921,6 +933,10 @@ static void spi_pump_messages(struct kth
- pm_runtime_put_autosuspend(master->dev.parent);
- }
- trace_spi_master_idle(master);
-+
-+ spin_lock_irqsave(&master->queue_lock, flags);
-+ master->idling = false;
-+ spin_unlock_irqrestore(&master->queue_lock, flags);
- return;
- }
-
-@@ -1166,12 +1182,9 @@ static int spi_destroy_queue(struct spi_
- return 0;
- }
-
--/**
-- * spi_queued_transfer - transfer function for queued transfers
-- * @spi: spi device which is requesting transfer
-- * @msg: spi message which is to handled is queued to driver queue
-- */
--static int spi_queued_transfer(struct spi_device *spi, struct spi_message *msg)
-+static int __spi_queued_transfer(struct spi_device *spi,
-+ struct spi_message *msg,
-+ bool need_pump)
- {
- struct spi_master *master = spi->master;
- unsigned long flags;
-@@ -1186,13 +1199,23 @@ static int spi_queued_transfer(struct sp
- msg->status = -EINPROGRESS;
-
- list_add_tail(&msg->queue, &master->queue);
-- if (!master->busy)
-+ if (!master->busy && need_pump)
- queue_kthread_work(&master->kworker, &master->pump_messages);
-
- spin_unlock_irqrestore(&master->queue_lock, flags);
- return 0;
- }
-
-+/**
-+ * spi_queued_transfer - transfer function for queued transfers
-+ * @spi: spi device which is requesting transfer
-+ * @msg: spi message which is to handled is queued to driver queue
-+ */
-+static int spi_queued_transfer(struct spi_device *spi, struct spi_message *msg)
-+{
-+ return __spi_queued_transfer(spi, msg, true);
-+}
-+
- static int spi_master_initialize_queue(struct spi_master *master)
- {
- int ret;
-@@ -2104,19 +2127,46 @@ static int __spi_sync(struct spi_device
- DECLARE_COMPLETION_ONSTACK(done);
- int status;
- struct spi_master *master = spi->master;
-+ unsigned long flags;
-+
-+ status = __spi_validate(spi, message);
-+ if (status != 0)
-+ return status;
-
- message->complete = spi_complete;
- message->context = &done;
-+ message->spi = spi;
-
- if (!bus_locked)
- mutex_lock(&master->bus_lock_mutex);
-
-- status = spi_async_locked(spi, message);
-+ /* If we're not using the legacy transfer method then we will
-+ * try to transfer in the calling context so special case.
-+ * This code would be less tricky if we could remove the
-+ * support for driver implemented message queues.
-+ */
-+ if (master->transfer == spi_queued_transfer) {
-+ spin_lock_irqsave(&master->bus_lock_spinlock, flags);
-+
-+ trace_spi_message_submit(message);
-+
-+ status = __spi_queued_transfer(spi, message, false);
-+
-+ spin_unlock_irqrestore(&master->bus_lock_spinlock, flags);
-+ } else {
-+ status = spi_async_locked(spi, message);
-+ }
-
- if (!bus_locked)
- mutex_unlock(&master->bus_lock_mutex);
-
- if (status == 0) {
-+ /* Push out the messages in the calling context if we
-+ * can.
-+ */
-+ if (master->transfer == spi_queued_transfer)
-+ spi_pump_messages(&master->pump_messages);
-+
- wait_for_completion(&done);
- status = message->status;
- }
---- a/include/linux/spi/spi.h
-+++ b/include/linux/spi/spi.h
-@@ -260,6 +260,7 @@ static inline void spi_unregister_driver
- * @pump_messages: work struct for scheduling work to the message pump
- * @queue_lock: spinlock to syncronise access to message queue
- * @queue: message queue
-+ * @idling: the device is entering idle state
- * @cur_msg: the currently in-flight message
- * @cur_msg_prepared: spi_prepare_message was called for the currently
- * in-flight message
-@@ -425,6 +426,7 @@ struct spi_master {
- spinlock_t queue_lock;
- struct list_head queue;
- struct spi_message *cur_msg;
-+ bool idling;
- bool busy;
- bool running;
- bool rt;
+++ /dev/null
-From: Mark Brown <broonie@kernel.org>
-Date: Wed, 10 Dec 2014 13:46:33 +0000
-Subject: [PATCH] spi: Only idle the message pump in the worker kthread
-
-In order to avoid the situation where the kthread is waiting for another
-context to make the hardware idle let the message pump know if it's being
-called from the worker thread context and if it isn't then defer to the
-worker thread instead of idling the hardware immediately. This will ensure
-that if this situation happens we block rather than busy waiting.
-
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
-
---- a/drivers/spi/spi.c
-+++ b/drivers/spi/spi.c
-@@ -875,8 +875,9 @@ void spi_finalize_current_transfer(struc
- EXPORT_SYMBOL_GPL(spi_finalize_current_transfer);
-
- /**
-- * spi_pump_messages - kthread work function which processes spi message queue
-- * @work: pointer to kthread work struct contained in the master struct
-+ * __spi_pump_messages - function which processes spi message queue
-+ * @master: master to process queue for
-+ * @in_kthread: true if we are in the context of the message pump thread
- *
- * This function checks if there is any spi message in the queue that
- * needs processing and if so call out to the driver to initialize hardware
-@@ -886,10 +887,8 @@ EXPORT_SYMBOL_GPL(spi_finalize_current_t
- * inside spi_sync(); the queue extraction handling at the top of the
- * function should deal with this safely.
- */
--static void spi_pump_messages(struct kthread_work *work)
-+static void __spi_pump_messages(struct spi_master *master, bool in_kthread)
- {
-- struct spi_master *master =
-- container_of(work, struct spi_master, pump_messages);
- unsigned long flags;
- bool was_busy = false;
- int ret;
-@@ -916,6 +915,15 @@ static void spi_pump_messages(struct kth
- spin_unlock_irqrestore(&master->queue_lock, flags);
- return;
- }
-+
-+ /* Only do teardown in the thread */
-+ if (!in_kthread) {
-+ queue_kthread_work(&master->kworker,
-+ &master->pump_messages);
-+ spin_unlock_irqrestore(&master->queue_lock, flags);
-+ return;
-+ }
-+
- master->busy = false;
- master->idling = true;
- spin_unlock_irqrestore(&master->queue_lock, flags);
-@@ -1004,6 +1012,18 @@ static void spi_pump_messages(struct kth
- }
- }
-
-+/**
-+ * spi_pump_messages - kthread work function which processes spi message queue
-+ * @work: pointer to kthread work struct contained in the master struct
-+ */
-+static void spi_pump_messages(struct kthread_work *work)
-+{
-+ struct spi_master *master =
-+ container_of(work, struct spi_master, pump_messages);
-+
-+ __spi_pump_messages(master, true);
-+}
-+
- static int spi_init_queue(struct spi_master *master)
- {
- struct sched_param param = { .sched_priority = MAX_RT_PRIO - 1 };
-@@ -2165,7 +2185,7 @@ static int __spi_sync(struct spi_device
- * can.
- */
- if (master->transfer == spi_queued_transfer)
-- spi_pump_messages(&master->pump_messages);
-+ __spi_pump_messages(master, false);
-
- wait_for_completion(&done);
- status = message->status;
+++ /dev/null
-From 279c6c7fa64f5763e6b9f05e7ab3840092e702e7 Mon Sep 17 00:00:00 2001
-From: Stephen Hemminger <stephen@networkplumber.org>
-Date: Mon, 29 Jun 2015 14:57:48 -1000
-Subject: [PATCH] api: fix compatibility of linux/in.h with netinet/in.h
-
-u
-This fixes breakage to iproute2 build with recent kernel headers
-caused by:
- commit a263653ed798216c0069922d7b5237ca49436007
- Author: Pablo Neira Ayuso <pablo@netfilter.org>
- Date: Wed Jun 17 10:28:27 2015 -0500
-
- netfilter: don't pull include/linux/netfilter.h from netns headers
-
-The issue is that definitions in linux/in.h overlap with those
-in netinet/in.h. This patch solves this by introducing the same
-mechanism as was used to solve the same problem with linux/in6.h
-
-Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- include/uapi/linux/in.h | 16 +++++++++++++---
- include/uapi/linux/libc-compat.h | 22 ++++++++++++++++++++++
- 2 files changed, 35 insertions(+), 3 deletions(-)
-
---- a/include/uapi/linux/in.h
-+++ b/include/uapi/linux/in.h
-@@ -19,8 +19,10 @@
- #define _UAPI_LINUX_IN_H
-
- #include <linux/types.h>
-+#include <linux/libc-compat.h>
- #include <linux/socket.h>
-
-+#if __UAPI_DEF_IN_IPPROTO
- /* Standard well-defined IP protocols. */
- enum {
- IPPROTO_IP = 0, /* Dummy protocol for TCP */
-@@ -73,12 +75,14 @@ enum {
- #define IPPROTO_RAW IPPROTO_RAW
- IPPROTO_MAX
- };
-+#endif
-
--
-+#if __UAPI_DEF_IN_ADDR
- /* Internet address. */
- struct in_addr {
- __be32 s_addr;
- };
-+#endif
-
- #define IP_TOS 1
- #define IP_TTL 2
-@@ -154,6 +158,7 @@ struct in_addr {
-
- /* Request struct for multicast socket ops */
-
-+#if __UAPI_DEF_IP_MREQ
- struct ip_mreq {
- struct in_addr imr_multiaddr; /* IP multicast address of group */
- struct in_addr imr_interface; /* local IP address of interface */
-@@ -205,14 +210,18 @@ struct group_filter {
- #define GROUP_FILTER_SIZE(numsrc) \
- (sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \
- + (numsrc) * sizeof(struct __kernel_sockaddr_storage))
-+#endif
-
-+#if __UAPI_DEF_IN_PKTINFO
- struct in_pktinfo {
- int ipi_ifindex;
- struct in_addr ipi_spec_dst;
- struct in_addr ipi_addr;
- };
-+#endif
-
- /* Structure describing an Internet (IP) socket address. */
-+#if __UAPI_DEF_SOCKADDR_IN
- #define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */
- struct sockaddr_in {
- __kernel_sa_family_t sin_family; /* Address family */
-@@ -224,8 +233,9 @@ struct sockaddr_in {
- sizeof(unsigned short int) - sizeof(struct in_addr)];
- };
- #define sin_zero __pad /* for BSD UNIX comp. -FvK */
-+#endif
-
--
-+#if __UAPI_DEF_IN_CLASS
- /*
- * Definitions of the bits in an Internet address integer.
- * On subnets, host and network parts are found according
-@@ -276,7 +286,7 @@ struct sockaddr_in {
- #define INADDR_ALLHOSTS_GROUP 0xe0000001U /* 224.0.0.1 */
- #define INADDR_ALLRTRS_GROUP 0xe0000002U /* 224.0.0.2 */
- #define INADDR_MAX_LOCAL_GROUP 0xe00000ffU /* 224.0.0.255 */
--
-+#endif
-
- /* <asm/byteorder.h> contains the htonl type stuff.. */
- #include <asm/byteorder.h>
---- a/include/uapi/linux/libc-compat.h
-+++ b/include/uapi/linux/libc-compat.h
-@@ -56,6 +56,13 @@
-
- /* GLIBC headers included first so don't define anything
- * that would already be defined. */
-+#define __UAPI_DEF_IN_ADDR 0
-+#define __UAPI_DEF_IN_IPPROTO 0
-+#define __UAPI_DEF_IN_PKTINFO 0
-+#define __UAPI_DEF_IP_MREQ 0
-+#define __UAPI_DEF_SOCKADDR_IN 0
-+#define __UAPI_DEF_IN_CLASS 0
-+
- #define __UAPI_DEF_IN6_ADDR 0
- /* The exception is the in6_addr macros which must be defined
- * if the glibc code didn't define them. This guard matches
-@@ -76,6 +83,13 @@
- /* Linux headers included first, and we must define everything
- * we need. The expectation is that glibc will check the
- * __UAPI_DEF_* defines and adjust appropriately. */
-+#define __UAPI_DEF_IN_ADDR 1
-+#define __UAPI_DEF_IN_IPPROTO 1
-+#define __UAPI_DEF_IN_PKTINFO 1
-+#define __UAPI_DEF_IP_MREQ 1
-+#define __UAPI_DEF_SOCKADDR_IN 1
-+#define __UAPI_DEF_IN_CLASS 1
-+
- #define __UAPI_DEF_IN6_ADDR 1
- /* We unconditionally define the in6_addr macros and glibc must
- * coordinate. */
-@@ -99,6 +113,14 @@
- * that we need. */
- #else /* !defined(__GLIBC__) */
-
-+/* Definitions for in.h */
-+#define __UAPI_DEF_IN_ADDR 1
-+#define __UAPI_DEF_IN_IPPROTO 1
-+#define __UAPI_DEF_IN_PKTINFO 1
-+#define __UAPI_DEF_IP_MREQ 1
-+#define __UAPI_DEF_SOCKADDR_IN 1
-+#define __UAPI_DEF_IN_CLASS 1
-+
- /* Definitions for in6.h */
- #define __UAPI_DEF_IN6_ADDR 1
- #define __UAPI_DEF_IN6_ADDR_ALT 1
+++ /dev/null
-From: Rusty Russell <rusty@rustcorp.com.au>
-Date: Tue, 20 Jan 2015 09:07:04 +1030
-Subject: [PATCH] module_arch_freeing_init(): new hook for archs before module->module_init freed.
-
-Archs have been abusing module_free() to clean up their arch-specific
-allocations. Since module_free() is also (ab)used by BPF and trace code,
-let's keep it to simple allocations, and provide a hook called before
-that.
-
-This means that avr32, ia64, parisc and s390 no longer need to implement
-their own module_free() at all. avr32 doesn't need module_finalize()
-either.
-
-Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
-Cc: Chris Metcalf <cmetcalf@ezchip.com>
-Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
-Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
-Cc: Tony Luck <tony.luck@intel.com>
-Cc: Fenghua Yu <fenghua.yu@intel.com>
-Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
-Cc: Helge Deller <deller@gmx.de>
-Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
-Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
-Cc: linux-kernel@vger.kernel.org
-Cc: linux-ia64@vger.kernel.org
-Cc: linux-parisc@vger.kernel.org
-Cc: linux-s390@vger.kernel.org
-
-Origin: backport, https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=d453cded05ee219b77815ea194dc36efa5398bca
----
- arch/avr32/kernel/module.c | 13 +------------
- arch/ia64/kernel/module.c | 6 ++----
- arch/parisc/kernel/module.c | 6 +-----
- arch/s390/kernel/module.c | 10 +++-------
- arch/tile/kernel/module.c | 2 +-
- include/linux/moduleloader.h | 2 ++
- kernel/module.c | 7 +++++++
- 7 files changed, 17 insertions(+), 29 deletions(-)
-
---- a/arch/avr32/kernel/module.c
-+++ b/arch/avr32/kernel/module.c
-@@ -19,12 +19,10 @@
- #include <linux/moduleloader.h>
- #include <linux/vmalloc.h>
-
--void module_free(struct module *mod, void *module_region)
-+void module_arch_freeing_init(struct module *mod)
- {
- vfree(mod->arch.syminfo);
- mod->arch.syminfo = NULL;
--
-- vfree(module_region);
- }
-
- static inline int check_rela(Elf32_Rela *rela, struct module *module,
-@@ -291,12 +289,3 @@ int apply_relocate_add(Elf32_Shdr *sechd
-
- return ret;
- }
--
--int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
-- struct module *module)
--{
-- vfree(module->arch.syminfo);
-- module->arch.syminfo = NULL;
--
-- return 0;
--}
---- a/arch/ia64/kernel/module.c
-+++ b/arch/ia64/kernel/module.c
-@@ -305,14 +305,12 @@ plt_target (struct plt_entry *plt)
- #endif /* !USE_BRL */
-
- void
--module_free (struct module *mod, void *module_region)
-+module_arch_freeing_init (struct module *mod)
- {
-- if (mod && mod->arch.init_unw_table &&
-- module_region == mod->module_init) {
-+ if (mod->arch.init_unw_table) {
- unw_remove_unwind_table(mod->arch.init_unw_table);
- mod->arch.init_unw_table = NULL;
- }
-- vfree(module_region);
- }
-
- /* Have we already seen one of these relocations? */
---- a/arch/parisc/kernel/module.c
-+++ b/arch/parisc/kernel/module.c
-@@ -298,14 +298,10 @@ static inline unsigned long count_stubs(
- }
- #endif
-
--
--/* Free memory returned from module_alloc */
--void module_free(struct module *mod, void *module_region)
-+void module_arch_freeing_init(struct module *mod)
- {
- kfree(mod->arch.section);
- mod->arch.section = NULL;
--
-- vfree(module_region);
- }
-
- /* Additional bytes needed in front of individual sections */
---- a/arch/s390/kernel/module.c
-+++ b/arch/s390/kernel/module.c
-@@ -55,14 +55,10 @@ void *module_alloc(unsigned long size)
- }
- #endif
-
--/* Free memory returned from module_alloc */
--void module_free(struct module *mod, void *module_region)
-+void module_arch_freeing_init(struct module *mod)
- {
-- if (mod) {
-- vfree(mod->arch.syminfo);
-- mod->arch.syminfo = NULL;
-- }
-- vfree(module_region);
-+ vfree(mod->arch.syminfo);
-+ mod->arch.syminfo = NULL;
- }
-
- static void check_rela(Elf_Rela *rela, struct module *me)
---- a/arch/tile/kernel/module.c
-+++ b/arch/tile/kernel/module.c
-@@ -83,7 +83,7 @@ void module_free(struct module *mod, voi
- 0, 0, 0, NULL, NULL, 0);
-
- /*
-- * FIXME: If module_region == mod->module_init, trim exception
-+ * FIXME: Add module_arch_freeing_init to trim exception
- * table entries.
- */
- }
---- a/include/linux/moduleloader.h
-+++ b/include/linux/moduleloader.h
-@@ -82,4 +82,6 @@ int module_finalize(const Elf_Ehdr *hdr,
- /* Any cleanup needed when module leaves. */
- void module_arch_cleanup(struct module *mod);
-
-+/* Any cleanup before freeing mod->module_init */
-+void module_arch_freeing_init(struct module *mod);
- #endif
---- a/kernel/module.c
-+++ b/kernel/module.c
-@@ -1840,6 +1840,10 @@ void __weak module_arch_cleanup(struct m
- {
- }
-
-+void __weak module_arch_freeing_init(struct module *mod)
-+{
-+}
-+
- /* Free a module, remove from lists, etc. */
- static void free_module(struct module *mod)
- {
-@@ -1872,6 +1876,7 @@ static void free_module(struct module *m
-
- /* This may be NULL, but that's OK */
- unset_module_init_ro_nx(mod);
-+ module_arch_freeing_init(mod);
- module_free(mod, mod->module_init);
- kfree(mod->args);
- percpu_modfree(mod);
-@@ -2983,6 +2988,7 @@ static struct module *layout_and_allocat
- static void module_deallocate(struct module *mod, struct load_info *info)
- {
- percpu_modfree(mod);
-+ module_arch_freeing_init(mod);
- module_free(mod, mod->module_init);
- module_free(mod, mod->module_core);
- }
-@@ -3105,6 +3111,7 @@ static int do_init_module(struct module
- rcu_assign_pointer(mod->kallsyms, &mod->core_kallsyms);
- #endif
- unset_module_init_ro_nx(mod);
-+ module_arch_freeing_init(mod);
- module_free(mod, mod->module_init);
- mod->module_init = NULL;
- mod->init_size = 0;
+++ /dev/null
-From 1e311820ec3055e3f08e687de6564692a7cec675 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:29 +0100
-Subject: [PATCH 11/12] USB: EHCI: add ignore_oc flag to disable overcurrent
- checking
-
-This patch adds an ignore_oc flag which can be set by EHCI controller
-not supporting or wanting to disable overcurrent checking. The EHCI
-platform data in include/linux/usb/ehci_pdriver.h is also augmented to
-take advantage of this new flag.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- drivers/usb/host/ehci-hcd.c | 2 +-
- drivers/usb/host/ehci-hub.c | 4 ++--
- drivers/usb/host/ehci-platform.c | 1 +
- drivers/usb/host/ehci.h | 1 +
- include/linux/usb/ehci_pdriver.h | 1 +
- 5 files changed, 6 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -633,7 +633,7 @@ static int ehci_run (struct usb_hcd *hcd
- "USB %x.%x started, EHCI %x.%02x%s\n",
- ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
- temp >> 8, temp & 0xff,
-- ignore_oc ? ", overcurrent ignored" : "");
-+ (ignore_oc || ehci->ignore_oc) ? ", overcurrent ignored" : "");
-
- ehci_writel(ehci, INTR_MASK,
- &ehci->regs->intr_enable); /* Turn On Interrupts */
---- a/drivers/usb/host/ehci-hub.c
-+++ b/drivers/usb/host/ehci-hub.c
-@@ -635,7 +635,7 @@ ehci_hub_status_data (struct usb_hcd *hc
- * always set, seem to clear PORT_OCC and PORT_CSC when writing to
- * PORT_POWER; that's surprising, but maybe within-spec.
- */
-- if (!ignore_oc)
-+ if (!ignore_oc && !ehci->ignore_oc)
- mask = PORT_CSC | PORT_PEC | PORT_OCC;
- else
- mask = PORT_CSC | PORT_PEC;
-@@ -995,7 +995,7 @@ int ehci_hub_control(
- if (temp & PORT_PEC)
- status |= USB_PORT_STAT_C_ENABLE << 16;
-
-- if ((temp & PORT_OCC) && !ignore_oc){
-+ if ((temp & PORT_OCC) && (!ignore_oc && !ehci->ignore_oc)){
- status |= USB_PORT_STAT_C_OVERCURRENT << 16;
-
- /*
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -226,6 +226,8 @@ static int ehci_platform_probe(struct pl
- ehci->big_endian_desc = 1;
- if (pdata->big_endian_mmio)
- ehci->big_endian_mmio = 1;
-+ if (pdata->ignore_oc)
-+ ehci->ignore_oc = 1;
-
- #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
- if (ehci->big_endian_mmio) {
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -226,6 +226,7 @@ struct ehci_hcd { /* one per controlle
- unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */
- unsigned need_oc_pp_cycle:1; /* MPC834X port power */
- unsigned imx28_write_fix:1; /* For Freescale i.MX28 */
-+ unsigned ignore_oc:1;
-
- /* required for usb32 quirk */
- #define OHCI_CTRL_HCFS (3 << 6)
---- a/include/linux/usb/ehci_pdriver.h
-+++ b/include/linux/usb/ehci_pdriver.h
-@@ -45,6 +45,7 @@ struct usb_ehci_pdata {
- unsigned big_endian_desc:1;
- unsigned big_endian_mmio:1;
- unsigned no_io_watchdog:1;
-+ unsigned ignore_oc:1;
-
- /* Turn on all power and clocks */
- int (*power_on)(struct platform_device *pdev);
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 10 Apr 2015 13:35:29 +0200
-Subject: [PATCH] jffs2: use .rename2 and add RENAME_WHITEOUT support
-
-It is required for renames on overlayfs
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/fs/jffs2/dir.c
-+++ b/fs/jffs2/dir.c
-@@ -35,7 +35,7 @@ static int jffs2_mkdir (struct inode *,s
- static int jffs2_rmdir (struct inode *,struct dentry *);
- static int jffs2_mknod (struct inode *,struct dentry *,umode_t,dev_t);
- static int jffs2_rename (struct inode *, struct dentry *,
-- struct inode *, struct dentry *);
-+ struct inode *, struct dentry *, unsigned int);
-
- const struct file_operations jffs2_dir_operations =
- {
-@@ -57,7 +57,7 @@ const struct inode_operations jffs2_dir_
- .mkdir = jffs2_mkdir,
- .rmdir = jffs2_rmdir,
- .mknod = jffs2_mknod,
-- .rename = jffs2_rename,
-+ .rename2 = jffs2_rename,
- .get_acl = jffs2_get_acl,
- .set_acl = jffs2_set_acl,
- .setattr = jffs2_setattr,
-@@ -756,8 +756,27 @@ static int jffs2_mknod (struct inode *di
- return ret;
- }
-
-+static int jffs2_whiteout(struct inode *old_dir, struct dentry *old_dentry)
-+{
-+ struct dentry *wh;
-+ int err;
-+
-+ wh = d_alloc(old_dentry->d_parent, &old_dentry->d_name);
-+ if (!wh)
-+ return -ENOMEM;
-+
-+ err = jffs2_mknod(old_dir, wh, S_IFCHR | WHITEOUT_MODE,
-+ WHITEOUT_DEV);
-+ if (err)
-+ return err;
-+
-+ d_rehash(wh);
-+ return 0;
-+}
-+
- static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry,
-- struct inode *new_dir_i, struct dentry *new_dentry)
-+ struct inode *new_dir_i, struct dentry *new_dentry,
-+ unsigned int flags)
- {
- int ret;
- struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb);
-@@ -765,6 +784,9 @@ static int jffs2_rename (struct inode *o
- uint8_t type;
- uint32_t now;
-
-+ if (flags & ~RENAME_WHITEOUT)
-+ return -EINVAL;
-+
- /* The VFS will check for us and prevent trying to rename a
- * file over a directory and vice versa, but if it's a directory,
- * the VFS can't check whether the victim is empty. The filesystem
-@@ -828,9 +850,14 @@ static int jffs2_rename (struct inode *o
- if (S_ISDIR(old_dentry->d_inode->i_mode) && !victim_f)
- inc_nlink(new_dir_i);
-
-- /* Unlink the original */
-- ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
-- old_dentry->d_name.name, old_dentry->d_name.len, NULL, now);
-+ if (flags & RENAME_WHITEOUT)
-+ /* Replace with whiteout */
-+ ret = jffs2_whiteout(old_dir_i, old_dentry);
-+ else
-+ /* Unlink the original */
-+ ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
-+ old_dentry->d_name.name,
-+ old_dentry->d_name.len, NULL, now);
-
- /* We don't touch inode->i_nlink */
-
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 25 Apr 2015 12:41:32 +0200
-Subject: [PATCH] jffs2: add RENAME_EXCHANGE support
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/fs/jffs2/dir.c
-+++ b/fs/jffs2/dir.c
-@@ -784,7 +784,7 @@ static int jffs2_rename (struct inode *o
- uint8_t type;
- uint32_t now;
-
-- if (flags & ~RENAME_WHITEOUT)
-+ if (flags & ~(RENAME_WHITEOUT | RENAME_EXCHANGE))
- return -EINVAL;
-
- /* The VFS will check for us and prevent trying to rename a
-@@ -792,7 +792,7 @@ static int jffs2_rename (struct inode *o
- * the VFS can't check whether the victim is empty. The filesystem
- * needs to do that for itself.
- */
-- if (new_dentry->d_inode) {
-+ if (new_dentry->d_inode && !(flags & RENAME_EXCHANGE)) {
- victim_f = JFFS2_INODE_INFO(new_dentry->d_inode);
- if (S_ISDIR(new_dentry->d_inode->i_mode)) {
- struct jffs2_full_dirent *fd;
-@@ -827,7 +827,7 @@ static int jffs2_rename (struct inode *o
- if (ret)
- return ret;
-
-- if (victim_f) {
-+ if (victim_f && !(flags & RENAME_EXCHANGE)) {
- /* There was a victim. Kill it off nicely */
- if (S_ISDIR(new_dentry->d_inode->i_mode))
- clear_nlink(new_dentry->d_inode);
-@@ -853,6 +853,12 @@ static int jffs2_rename (struct inode *o
- if (flags & RENAME_WHITEOUT)
- /* Replace with whiteout */
- ret = jffs2_whiteout(old_dir_i, old_dentry);
-+ else if (flags & RENAME_EXCHANGE)
-+ /* Replace the original */
-+ ret = jffs2_do_link(c, JFFS2_INODE_INFO(old_dir_i),
-+ new_dentry->d_inode->i_ino, type,
-+ old_dentry->d_name.name, old_dentry->d_name.len,
-+ now);
- else
- /* Unlink the original */
- ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
-@@ -879,7 +885,7 @@ static int jffs2_rename (struct inode *o
- return ret;
- }
-
-- if (S_ISDIR(old_dentry->d_inode->i_mode))
-+ if (S_ISDIR(old_dentry->d_inode->i_mode) && !(flags & RENAME_EXCHANGE))
- drop_nlink(old_dir_i);
-
- new_dir_i->i_mtime = new_dir_i->i_ctime = old_dir_i->i_mtime = old_dir_i->i_ctime = ITIME(now);
+++ /dev/null
-From: Stephen Hemminger <stephen@networkplumber.org>
-Subject: bridge: allow receiption on disabled port
-
-When an ethernet device is enslaved to a bridge, and the bridge STP
-detects loss of carrier (or operational state down), then normally
-packet receiption is blocked.
-
-This breaks control applications like WPA which maybe expecting to
-receive packets to negotiate to bring link up. The bridge needs to
-block forwarding packets from these disabled ports, but there is no
-hard requirement to not allow local packet delivery.
-
-Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
---- a/net/bridge/br_input.c
-+++ b/net/bridge/br_input.c
-@@ -146,11 +146,13 @@ EXPORT_SYMBOL_GPL(br_handle_frame_finish
- static int br_handle_local_finish(struct sk_buff *skb)
- {
- struct net_bridge_port *p = br_port_get_rcu(skb->dev);
-- u16 vid = 0;
-+ if (p->state != BR_STATE_DISABLED) {
-+ u16 vid = 0;
-
-- /* check if vlan is allowed, to avoid spoofing */
-- if (p->flags & BR_LEARNING && br_should_learn(p, skb, &vid))
-- br_fdb_update(p->br, p, eth_hdr(skb)->h_source, vid, false);
-+ /* check if vlan is allowed, to avoid spoofing */
-+ if (p->flags & BR_LEARNING && br_should_learn(p, skb, &vid))
-+ br_fdb_update(p->br, p, eth_hdr(skb)->h_source, vid, false);
-+ }
- return 0; /* process further */
- }
-
-@@ -224,6 +226,18 @@ rx_handler_result_t br_handle_frame(stru
-
- forward:
- switch (p->state) {
-+ case BR_STATE_DISABLED:
-+ if (ether_addr_equal(p->br->dev->dev_addr, dest))
-+ skb->pkt_type = PACKET_HOST;
-+
-+ if (NF_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING, skb, skb->dev, NULL,
-+ br_handle_local_finish))
-+ break;
-+
-+ BR_INPUT_SKB_CB(skb)->brdev = p->br->dev;
-+ br_pass_frame_up(skb);
-+ break;
-+
- case BR_STATE_FORWARDING:
- rhook = rcu_dereference(br_should_route_hook);
- if (rhook) {
+++ /dev/null
-From 2c58080407554e1bac8fd50d23cb02420524caed Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 12 Aug 2013 12:50:22 +0200
-Subject: [PATCH] MIPS: partially inline dma ops
-
-Several DMA ops are no-op on many platforms, and the indirection through
-the mips_dma_map_ops function table is causing the compiler to emit
-unnecessary code.
-
-Inlining visibly improves network performance in my tests (on a 24Kc
-based system), and also slightly reduces code size of a few drivers.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/Kconfig | 4 +
- arch/mips/include/asm/dma-mapping.h | 360 +++++++++++++++++++++++++++++++++++-
- arch/mips/mm/dma-default.c | 163 ++--------------
- 3 files changed, 373 insertions(+), 154 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1450,6 +1450,7 @@ config CPU_CAVIUM_OCTEON
- select CPU_SUPPORTS_HUGEPAGES
- select USB_EHCI_BIG_ENDIAN_MMIO
- select MIPS_L1_CACHE_SHIFT_7
-+ select SYS_HAS_DMA_OPS
- help
- The Cavium Octeon processor is a highly integrated chip containing
- many ethernet hardware widgets for networking tasks. The processor
-@@ -1705,6 +1706,9 @@ config MIPS_MALTA_PM
- bool
- default y
-
-+config SYS_HAS_DMA_OPS
-+ bool
-+
- #
- # CPU may reorder R->R, R->W, W->R, W->W
- # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
---- a/arch/mips/include/asm/dma-mapping.h
-+++ b/arch/mips/include/asm/dma-mapping.h
-@@ -1,9 +1,16 @@
- #ifndef _ASM_DMA_MAPPING_H
- #define _ASM_DMA_MAPPING_H
-
-+#include <linux/kmemcheck.h>
-+#include <linux/bug.h>
-+#include <linux/scatterlist.h>
-+#include <linux/dma-debug.h>
-+#include <linux/dma-attrs.h>
-+
- #include <asm/scatterlist.h>
- #include <asm/dma-coherence.h>
- #include <asm/cache.h>
-+#include <asm/cpu-type.h>
- #include <asm-generic/dma-coherent.h>
-
- #ifndef CONFIG_SGI_IP27 /* Kludge to fix 2.6.39 build for IP27 */
-@@ -12,12 +19,48 @@
-
- extern struct dma_map_ops *mips_dma_map_ops;
-
-+void __dma_sync(struct page *page, unsigned long offset, size_t size,
-+ enum dma_data_direction direction);
-+void *mips_dma_alloc_coherent(struct device *dev, size_t size,
-+ dma_addr_t *dma_handle, gfp_t gfp,
-+ struct dma_attrs *attrs);
-+void mips_dma_free_coherent(struct device *dev, size_t size, void *vaddr,
-+ dma_addr_t dma_handle, struct dma_attrs *attrs);
-+
- static inline struct dma_map_ops *get_dma_ops(struct device *dev)
- {
-+#ifdef CONFIG_SYS_HAS_DMA_OPS
- if (dev && dev->archdata.dma_ops)
- return dev->archdata.dma_ops;
- else
- return mips_dma_map_ops;
-+#else
-+ return NULL;
-+#endif
-+}
-+
-+/*
-+ * Warning on the terminology - Linux calls an uncached area coherent;
-+ * MIPS terminology calls memory areas with hardware maintained coherency
-+ * coherent.
-+ */
-+
-+static inline int cpu_needs_post_dma_flush(struct device *dev)
-+{
-+#ifndef CONFIG_SYS_HAS_CPU_R10000
-+ return 0;
-+#endif
-+ return !plat_device_is_coherent(dev) &&
-+ (boot_cpu_type() == CPU_R10000 ||
-+ boot_cpu_type() == CPU_R12000 ||
-+ boot_cpu_type() == CPU_BMIPS5000);
-+}
-+
-+static inline struct page *dma_addr_to_page(struct device *dev,
-+ dma_addr_t dma_addr)
-+{
-+ return pfn_to_page(
-+ plat_dma_addr_to_phys(dev, dma_addr) >> PAGE_SHIFT);
- }
-
- static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
-@@ -30,12 +73,304 @@ static inline bool dma_capable(struct de
-
- static inline void dma_mark_clean(void *addr, size_t size) {}
-
--#include <asm-generic/dma-mapping-common.h>
-+static inline dma_addr_t dma_map_single_attrs(struct device *dev, void *ptr,
-+ size_t size,
-+ enum dma_data_direction dir,
-+ struct dma_attrs *attrs)
-+{
-+ struct dma_map_ops *ops = get_dma_ops(dev);
-+ unsigned long offset = (unsigned long)ptr & ~PAGE_MASK;
-+ struct page *page = virt_to_page(ptr);
-+ dma_addr_t addr;
-+
-+ kmemcheck_mark_initialized(ptr, size);
-+ BUG_ON(!valid_dma_direction(dir));
-+ if (ops) {
-+ addr = ops->map_page(dev, page, offset, size, dir, attrs);
-+ } else {
-+ if (!plat_device_is_coherent(dev))
-+ __dma_sync(page, offset, size, dir);
-+
-+ addr = plat_map_dma_mem_page(dev, page) + offset;
-+ }
-+ debug_dma_map_page(dev, page, offset, size, dir, addr, true);
-+ return addr;
-+}
-+
-+static inline void dma_unmap_single_attrs(struct device *dev, dma_addr_t addr,
-+ size_t size,
-+ enum dma_data_direction dir,
-+ struct dma_attrs *attrs)
-+{
-+ struct dma_map_ops *ops = get_dma_ops(dev);
-+
-+ BUG_ON(!valid_dma_direction(dir));
-+ if (ops) {
-+ ops->unmap_page(dev, addr, size, dir, attrs);
-+ } else {
-+ if (cpu_needs_post_dma_flush(dev))
-+ __dma_sync(dma_addr_to_page(dev, addr),
-+ addr & ~PAGE_MASK, size, dir);
-+
-+ plat_unmap_dma_mem(dev, addr, size, dir);
-+ }
-+ debug_dma_unmap_page(dev, addr, size, dir, true);
-+}
-+
-+static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg,
-+ int nents, enum dma_data_direction dir,
-+ struct dma_attrs *attrs)
-+{
-+ struct dma_map_ops *ops = get_dma_ops(dev);
-+ int i, ents;
-+ struct scatterlist *s;
-+
-+ for_each_sg(sg, s, nents, i)
-+ kmemcheck_mark_initialized(sg_virt(s), s->length);
-+ BUG_ON(!valid_dma_direction(dir));
-+ if (ops) {
-+ ents = ops->map_sg(dev, sg, nents, dir, attrs);
-+ } else {
-+ for_each_sg(sg, s, nents, i) {
-+ struct page *page = sg_page(s);
-+
-+ if (!plat_device_is_coherent(dev))
-+ __dma_sync(page, s->offset, s->length, dir);
-+#ifdef CONFIG_NEED_SG_DMA_LENGTH
-+ s->dma_length = s->length;
-+#endif
-+ s->dma_address =
-+ plat_map_dma_mem_page(dev, page) + s->offset;
-+ }
-+ ents = nents;
-+ }
-+ debug_dma_map_sg(dev, sg, nents, ents, dir);
-+
-+ return ents;
-+}
-+
-+static inline void dma_unmap_sg_attrs(struct device *dev, struct scatterlist *sg,
-+ int nents, enum dma_data_direction dir,
-+ struct dma_attrs *attrs)
-+{
-+ struct dma_map_ops *ops = get_dma_ops(dev);
-+ struct scatterlist *s;
-+ int i;
-+
-+ BUG_ON(!valid_dma_direction(dir));
-+ debug_dma_unmap_sg(dev, sg, nents, dir);
-+ if (ops) {
-+ ops->unmap_sg(dev, sg, nents, dir, attrs);
-+ return;
-+ }
-+
-+ for_each_sg(sg, s, nents, i) {
-+ if (!plat_device_is_coherent(dev) && dir != DMA_TO_DEVICE)
-+ __dma_sync(sg_page(s), s->offset, s->length, dir);
-+ plat_unmap_dma_mem(dev, s->dma_address, s->length, dir);
-+ }
-+}
-+
-+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
-+ size_t offset, size_t size,
-+ enum dma_data_direction dir)
-+{
-+ struct dma_map_ops *ops = get_dma_ops(dev);
-+ dma_addr_t addr;
-+
-+ kmemcheck_mark_initialized(page_address(page) + offset, size);
-+ BUG_ON(!valid_dma_direction(dir));
-+ if (ops) {
-+ addr = ops->map_page(dev, page, offset, size, dir, NULL);
-+ } else {
-+ if (!plat_device_is_coherent(dev))
-+ __dma_sync(page, offset, size, dir);
-+
-+ addr = plat_map_dma_mem_page(dev, page) + offset;
-+ }
-+ debug_dma_map_page(dev, page, offset, size, dir, addr, false);
-+
-+ return addr;
-+}
-+
-+static inline void dma_unmap_page(struct device *dev, dma_addr_t addr,
-+ size_t size, enum dma_data_direction dir)
-+{
-+ struct dma_map_ops *ops = get_dma_ops(dev);
-+
-+ BUG_ON(!valid_dma_direction(dir));
-+ if (ops) {
-+ ops->unmap_page(dev, addr, size, dir, NULL);
-+ } else {
-+ if (cpu_needs_post_dma_flush(dev))
-+ __dma_sync(dma_addr_to_page(dev, addr),
-+ addr & ~PAGE_MASK, size, dir);
-+
-+ plat_unmap_dma_mem(dev, addr, size, dir);
-+ }
-+ debug_dma_unmap_page(dev, addr, size, dir, false);
-+}
-+
-+static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t addr,
-+ size_t size,
-+ enum dma_data_direction dir)
-+{
-+ struct dma_map_ops *ops = get_dma_ops(dev);
-+
-+ BUG_ON(!valid_dma_direction(dir));
-+ if (ops)
-+ ops->sync_single_for_cpu(dev, addr, size, dir);
-+ else if (cpu_needs_post_dma_flush(dev))
-+ __dma_sync(dma_addr_to_page(dev, addr),
-+ addr & ~PAGE_MASK, size, dir);
-+ debug_dma_sync_single_for_cpu(dev, addr, size, dir);
-+}
-+
-+static inline void dma_sync_single_for_device(struct device *dev,
-+ dma_addr_t addr, size_t size,
-+ enum dma_data_direction dir)
-+{
-+ struct dma_map_ops *ops = get_dma_ops(dev);
-+
-+ BUG_ON(!valid_dma_direction(dir));
-+ if (ops)
-+ ops->sync_single_for_device(dev, addr, size, dir);
-+ else if (!plat_device_is_coherent(dev))
-+ __dma_sync(dma_addr_to_page(dev, addr),
-+ addr & ~PAGE_MASK, size, dir);
-+ debug_dma_sync_single_for_device(dev, addr, size, dir);
-+}
-+
-+static inline void dma_sync_single_range_for_cpu(struct device *dev,
-+ dma_addr_t addr,
-+ unsigned long offset,
-+ size_t size,
-+ enum dma_data_direction dir)
-+{
-+ const struct dma_map_ops *ops = get_dma_ops(dev);
-+
-+ BUG_ON(!valid_dma_direction(dir));
-+ if (ops)
-+ ops->sync_single_for_cpu(dev, addr + offset, size, dir);
-+ else if (cpu_needs_post_dma_flush(dev))
-+ __dma_sync(dma_addr_to_page(dev, addr + offset),
-+ (addr + offset) & ~PAGE_MASK, size, dir);
-+ debug_dma_sync_single_range_for_cpu(dev, addr, offset, size, dir);
-+}
-+
-+static inline void dma_sync_single_range_for_device(struct device *dev,
-+ dma_addr_t addr,
-+ unsigned long offset,
-+ size_t size,
-+ enum dma_data_direction dir)
-+{
-+ const struct dma_map_ops *ops = get_dma_ops(dev);
-+
-+ BUG_ON(!valid_dma_direction(dir));
-+ if (ops)
-+ ops->sync_single_for_device(dev, addr + offset, size, dir);
-+ else if (!plat_device_is_coherent(dev))
-+ __dma_sync(dma_addr_to_page(dev, addr + offset),
-+ (addr + offset) & ~PAGE_MASK, size, dir);
-+ debug_dma_sync_single_range_for_device(dev, addr, offset, size, dir);
-+}
-+
-+static inline void
-+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
-+ int nelems, enum dma_data_direction dir)
-+{
-+ struct dma_map_ops *ops = get_dma_ops(dev);
-+ struct scatterlist *s;
-+ int i;
-+
-+ BUG_ON(!valid_dma_direction(dir));
-+ if (ops)
-+ ops->sync_sg_for_cpu(dev, sg, nelems, dir);
-+ else if (cpu_needs_post_dma_flush(dev)) {
-+ for_each_sg(sg, s, nelems, i)
-+ __dma_sync(sg_page(s), s->offset, s->length, dir);
-+ }
-+ debug_dma_sync_sg_for_cpu(dev, sg, nelems, dir);
-+}
-+
-+static inline void
-+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
-+ int nelems, enum dma_data_direction dir)
-+{
-+ struct dma_map_ops *ops = get_dma_ops(dev);
-+ struct scatterlist *s;
-+ int i;
-+
-+ BUG_ON(!valid_dma_direction(dir));
-+ if (ops)
-+ ops->sync_sg_for_device(dev, sg, nelems, dir);
-+ else if (!plat_device_is_coherent(dev)) {
-+ for_each_sg(sg, s, nelems, i)
-+ __dma_sync(sg_page(s), s->offset, s->length, dir);
-+ }
-+ debug_dma_sync_sg_for_device(dev, sg, nelems, dir);
-+
-+}
-+
-+#define dma_map_single(d, a, s, r) dma_map_single_attrs(d, a, s, r, NULL)
-+#define dma_unmap_single(d, a, s, r) dma_unmap_single_attrs(d, a, s, r, NULL)
-+#define dma_map_sg(d, s, n, r) dma_map_sg_attrs(d, s, n, r, NULL)
-+#define dma_unmap_sg(d, s, n, r) dma_unmap_sg_attrs(d, s, n, r, NULL)
-+
-+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
-+ void *cpu_addr, dma_addr_t dma_addr, size_t size);
-+
-+/**
-+ * dma_mmap_attrs - map a coherent DMA allocation into user space
-+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
-+ * @vma: vm_area_struct describing requested user mapping
-+ * @cpu_addr: kernel CPU-view address returned from dma_alloc_attrs
-+ * @handle: device-view address returned from dma_alloc_attrs
-+ * @size: size of memory originally requested in dma_alloc_attrs
-+ * @attrs: attributes of mapping properties requested in dma_alloc_attrs
-+ *
-+ * Map a coherent DMA buffer previously allocated by dma_alloc_attrs
-+ * into user space. The coherent DMA buffer must not be freed by the
-+ * driver until the user space mapping has been released.
-+ */
-+static inline int
-+dma_mmap_attrs(struct device *dev, struct vm_area_struct *vma, void *cpu_addr,
-+ dma_addr_t dma_addr, size_t size, struct dma_attrs *attrs)
-+{
-+ struct dma_map_ops *ops = get_dma_ops(dev);
-+ BUG_ON(!ops);
-+ if (ops && ops->mmap)
-+ return ops->mmap(dev, vma, cpu_addr, dma_addr, size, attrs);
-+ return dma_common_mmap(dev, vma, cpu_addr, dma_addr, size);
-+}
-+
-+#define dma_mmap_coherent(d, v, c, h, s) dma_mmap_attrs(d, v, c, h, s, NULL)
-+
-+int
-+dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
-+ void *cpu_addr, dma_addr_t dma_addr, size_t size);
-+
-+static inline int
-+dma_get_sgtable_attrs(struct device *dev, struct sg_table *sgt, void *cpu_addr,
-+ dma_addr_t dma_addr, size_t size, struct dma_attrs *attrs)
-+{
-+ struct dma_map_ops *ops = get_dma_ops(dev);
-+ BUG_ON(!ops);
-+ if (ops && ops->get_sgtable)
-+ return ops->get_sgtable(dev, sgt, cpu_addr, dma_addr, size,
-+ attrs);
-+ return dma_common_get_sgtable(dev, sgt, cpu_addr, dma_addr, size);
-+}
-+
-+#define dma_get_sgtable(d, t, v, h, s) dma_get_sgtable_attrs(d, t, v, h, s, NULL)
-+
-
- static inline int dma_supported(struct device *dev, u64 mask)
- {
- struct dma_map_ops *ops = get_dma_ops(dev);
-- return ops->dma_supported(dev, mask);
-+ if (ops)
-+ return ops->dma_supported(dev, mask);
-+ return plat_dma_supported(dev, mask);
- }
-
- static inline int dma_mapping_error(struct device *dev, u64 mask)
-@@ -43,7 +378,9 @@ static inline int dma_mapping_error(stru
- struct dma_map_ops *ops = get_dma_ops(dev);
-
- debug_dma_mapping_error(dev, mask);
-- return ops->mapping_error(dev, mask);
-+ if (ops)
-+ return ops->mapping_error(dev, mask);
-+ return 0;
- }
-
- static inline int
-@@ -54,7 +391,7 @@ dma_set_mask(struct device *dev, u64 mas
- if(!dev->dma_mask || !dma_supported(dev, mask))
- return -EIO;
-
-- if (ops->set_dma_mask)
-+ if (ops && ops->set_dma_mask)
- return ops->set_dma_mask(dev, mask);
-
- *dev->dma_mask = mask;
-@@ -74,7 +411,11 @@ static inline void *dma_alloc_attrs(stru
- void *ret;
- struct dma_map_ops *ops = get_dma_ops(dev);
-
-- ret = ops->alloc(dev, size, dma_handle, gfp, attrs);
-+ if (ops)
-+ ret = ops->alloc(dev, size, dma_handle, gfp, attrs);
-+ else
-+ ret = mips_dma_alloc_coherent(dev, size, dma_handle, gfp,
-+ attrs);
-
- debug_dma_alloc_coherent(dev, size, *dma_handle, ret);
-
-@@ -89,7 +430,10 @@ static inline void dma_free_attrs(struct
- {
- struct dma_map_ops *ops = get_dma_ops(dev);
-
-- ops->free(dev, size, vaddr, dma_handle, attrs);
-+ if (ops)
-+ ops->free(dev, size, vaddr, dma_handle, attrs);
-+ else
-+ mips_dma_free_coherent(dev, size, vaddr, dma_handle, attrs);
-
- debug_dma_free_coherent(dev, size, vaddr, dma_handle);
- }
---- a/arch/mips/mm/dma-default.c
-+++ b/arch/mips/mm/dma-default.c
-@@ -26,7 +26,7 @@
-
- #ifdef CONFIG_DMA_MAYBE_COHERENT
- int coherentio = 0; /* User defined DMA coherency from command line. */
--EXPORT_SYMBOL_GPL(coherentio);
-+EXPORT_SYMBOL(coherentio);
- int hw_coherentio = 0; /* Actual hardware supported DMA coherency setting. */
-
- static int __init setcoherentio(char *str)
-@@ -46,30 +46,6 @@ static int __init setnocoherentio(char *
- early_param("nocoherentio", setnocoherentio);
- #endif
-
--static inline struct page *dma_addr_to_page(struct device *dev,
-- dma_addr_t dma_addr)
--{
-- return pfn_to_page(
-- plat_dma_addr_to_phys(dev, dma_addr) >> PAGE_SHIFT);
--}
--
--/*
-- * The affected CPUs below in 'cpu_needs_post_dma_flush()' can
-- * speculatively fill random cachelines with stale data at any time,
-- * requiring an extra flush post-DMA.
-- *
-- * Warning on the terminology - Linux calls an uncached area coherent;
-- * MIPS terminology calls memory areas with hardware maintained coherency
-- * coherent.
-- */
--static inline int cpu_needs_post_dma_flush(struct device *dev)
--{
-- return !plat_device_is_coherent(dev) &&
-- (boot_cpu_type() == CPU_R10000 ||
-- boot_cpu_type() == CPU_R12000 ||
-- boot_cpu_type() == CPU_BMIPS5000);
--}
--
- static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp)
- {
- gfp_t dma_flag;
-@@ -125,8 +101,9 @@ void *dma_alloc_noncoherent(struct devic
- }
- EXPORT_SYMBOL(dma_alloc_noncoherent);
-
--static void *mips_dma_alloc_coherent(struct device *dev, size_t size,
-- dma_addr_t * dma_handle, gfp_t gfp, struct dma_attrs *attrs)
-+void *mips_dma_alloc_coherent(struct device *dev, size_t size,
-+ dma_addr_t *dma_handle, gfp_t gfp,
-+ struct dma_attrs *attrs)
- {
- void *ret;
- struct page *page = NULL;
-@@ -157,6 +134,7 @@ static void *mips_dma_alloc_coherent(str
-
- return ret;
- }
-+EXPORT_SYMBOL(mips_dma_alloc_coherent);
-
-
- void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr,
-@@ -167,8 +145,8 @@ void dma_free_noncoherent(struct device
- }
- EXPORT_SYMBOL(dma_free_noncoherent);
-
--static void mips_dma_free_coherent(struct device *dev, size_t size, void *vaddr,
-- dma_addr_t dma_handle, struct dma_attrs *attrs)
-+void mips_dma_free_coherent(struct device *dev, size_t size, void *vaddr,
-+ dma_addr_t dma_handle, struct dma_attrs *attrs)
- {
- unsigned long addr = (unsigned long) vaddr;
- int order = get_order(size);
-@@ -188,6 +166,7 @@ static void mips_dma_free_coherent(struc
- if (!dma_release_from_contiguous(dev, page, count))
- __free_pages(page, get_order(size));
- }
-+EXPORT_SYMBOL(mips_dma_free_coherent);
-
- static inline void __dma_sync_virtual(void *addr, size_t size,
- enum dma_data_direction direction)
-@@ -216,8 +195,8 @@ static inline void __dma_sync_virtual(vo
- * If highmem is not configured then the bulk of this loop gets
- * optimized out.
- */
--static inline void __dma_sync(struct page *page,
-- unsigned long offset, size_t size, enum dma_data_direction direction)
-+void __dma_sync(struct page *page, unsigned long offset, size_t size,
-+ enum dma_data_direction direction)
- {
- size_t left = size;
-
-@@ -246,108 +225,7 @@ static inline void __dma_sync(struct pag
- left -= len;
- } while (left);
- }
--
--static void mips_dma_unmap_page(struct device *dev, dma_addr_t dma_addr,
-- size_t size, enum dma_data_direction direction, struct dma_attrs *attrs)
--{
-- if (cpu_needs_post_dma_flush(dev))
-- __dma_sync(dma_addr_to_page(dev, dma_addr),
-- dma_addr & ~PAGE_MASK, size, direction);
--
-- plat_unmap_dma_mem(dev, dma_addr, size, direction);
--}
--
--static int mips_dma_map_sg(struct device *dev, struct scatterlist *sg,
-- int nents, enum dma_data_direction direction, struct dma_attrs *attrs)
--{
-- int i;
--
-- for (i = 0; i < nents; i++, sg++) {
-- if (!plat_device_is_coherent(dev))
-- __dma_sync(sg_page(sg), sg->offset, sg->length,
-- direction);
--#ifdef CONFIG_NEED_SG_DMA_LENGTH
-- sg->dma_length = sg->length;
--#endif
-- sg->dma_address = plat_map_dma_mem_page(dev, sg_page(sg)) +
-- sg->offset;
-- }
--
-- return nents;
--}
--
--static dma_addr_t mips_dma_map_page(struct device *dev, struct page *page,
-- unsigned long offset, size_t size, enum dma_data_direction direction,
-- struct dma_attrs *attrs)
--{
-- if (!plat_device_is_coherent(dev))
-- __dma_sync(page, offset, size, direction);
--
-- return plat_map_dma_mem_page(dev, page) + offset;
--}
--
--static void mips_dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-- int nhwentries, enum dma_data_direction direction,
-- struct dma_attrs *attrs)
--{
-- int i;
--
-- for (i = 0; i < nhwentries; i++, sg++) {
-- if (!plat_device_is_coherent(dev) &&
-- direction != DMA_TO_DEVICE)
-- __dma_sync(sg_page(sg), sg->offset, sg->length,
-- direction);
-- plat_unmap_dma_mem(dev, sg->dma_address, sg->length, direction);
-- }
--}
--
--static void mips_dma_sync_single_for_cpu(struct device *dev,
-- dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
--{
-- if (cpu_needs_post_dma_flush(dev))
-- __dma_sync(dma_addr_to_page(dev, dma_handle),
-- dma_handle & ~PAGE_MASK, size, direction);
--}
--
--static void mips_dma_sync_single_for_device(struct device *dev,
-- dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
--{
-- if (!plat_device_is_coherent(dev))
-- __dma_sync(dma_addr_to_page(dev, dma_handle),
-- dma_handle & ~PAGE_MASK, size, direction);
--}
--
--static void mips_dma_sync_sg_for_cpu(struct device *dev,
-- struct scatterlist *sg, int nelems, enum dma_data_direction direction)
--{
-- int i;
--
-- if (cpu_needs_post_dma_flush(dev))
-- for (i = 0; i < nelems; i++, sg++)
-- __dma_sync(sg_page(sg), sg->offset, sg->length,
-- direction);
--}
--
--static void mips_dma_sync_sg_for_device(struct device *dev,
-- struct scatterlist *sg, int nelems, enum dma_data_direction direction)
--{
-- int i;
--
-- if (!plat_device_is_coherent(dev))
-- for (i = 0; i < nelems; i++, sg++)
-- __dma_sync(sg_page(sg), sg->offset, sg->length,
-- direction);
--}
--
--int mips_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
--{
-- return 0;
--}
--
--int mips_dma_supported(struct device *dev, u64 mask)
--{
-- return plat_dma_supported(dev, mask);
--}
-+EXPORT_SYMBOL(__dma_sync);
-
- void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
- enum dma_data_direction direction)
-@@ -360,23 +238,10 @@ void dma_cache_sync(struct device *dev,
-
- EXPORT_SYMBOL(dma_cache_sync);
-
--static struct dma_map_ops mips_default_dma_map_ops = {
-- .alloc = mips_dma_alloc_coherent,
-- .free = mips_dma_free_coherent,
-- .map_page = mips_dma_map_page,
-- .unmap_page = mips_dma_unmap_page,
-- .map_sg = mips_dma_map_sg,
-- .unmap_sg = mips_dma_unmap_sg,
-- .sync_single_for_cpu = mips_dma_sync_single_for_cpu,
-- .sync_single_for_device = mips_dma_sync_single_for_device,
-- .sync_sg_for_cpu = mips_dma_sync_sg_for_cpu,
-- .sync_sg_for_device = mips_dma_sync_sg_for_device,
-- .mapping_error = mips_dma_mapping_error,
-- .dma_supported = mips_dma_supported
--};
--
--struct dma_map_ops *mips_dma_map_ops = &mips_default_dma_map_ops;
-+#ifdef CONFIG_SYS_HAS_DMA_OPS
-+struct dma_map_ops *mips_dma_map_ops = NULL;
- EXPORT_SYMBOL(mips_dma_map_ops);
-+#endif
-
- #define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16)
-
+++ /dev/null
-From 173b0add0cff6558f950c0cb1eacfb729d482711 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 17 May 2015 18:48:38 +0200
-Subject: [PATCH 4/8] mtd: part: add generic parsing of linux,part-probe
-
-This moves the linux,part-probe device tree parsing code from
-physmap_of.c to mtdpart.c. Now all drivers can use this feature by just
-providing a reference to their device tree node in struct
-mtd_part_parser_data.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- Documentation/devicetree/bindings/mtd/nand.txt | 16 ++++++++++
- drivers/mtd/maps/physmap_of.c | 40 +-----------------------
- drivers/mtd/mtdpart.c | 43 ++++++++++++++++++++++++++
- 3 files changed, 60 insertions(+), 39 deletions(-)
-
---- a/Documentation/devicetree/bindings/mtd/nand.txt
-+++ b/Documentation/devicetree/bindings/mtd/nand.txt
-@@ -12,6 +12,22 @@
- - nand-ecc-step-size: integer representing the number of data bytes
- that are covered by a single ECC step.
-
-+- linux,part-probe: list of name as strings of the partition parser
-+ which should be used to parse the partition table.
-+ They will be tried in the specified ordering and
-+ the next one will be used if the previous one
-+ failed.
-+
-+ Example: linux,part-probe = "cmdlinepart", "ofpart";
-+
-+ This is also the default value, which will be used
-+ if this attribute is not specified. It could be
-+ that the flash driver in use overwrote the default
-+ value and uses some other default.
-+
-+ Possible values are: bcm47xxpart, afs, ar7part,
-+ ofoldpart, ofpart, bcm63xxpart, RedBoot, cmdlinepart
-+
- The ECC strength and ECC step size properties define the correction capability
- of a controller. Together, they say a controller can correct "{strength} bit
- errors per {size} bytes".
---- a/drivers/mtd/maps/physmap_of.c
-+++ b/drivers/mtd/maps/physmap_of.c
-@@ -114,45 +114,9 @@ static struct mtd_info *obsolete_probe(s
- static const char * const part_probe_types_def[] = {
- "cmdlinepart", "RedBoot", "ofpart", "ofoldpart", NULL };
-
--static const char * const *of_get_probes(struct device_node *dp)
--{
-- const char *cp;
-- int cplen;
-- unsigned int l;
-- unsigned int count;
-- const char **res;
--
-- cp = of_get_property(dp, "linux,part-probe", &cplen);
-- if (cp == NULL)
-- return part_probe_types_def;
--
-- count = 0;
-- for (l = 0; l != cplen; l++)
-- if (cp[l] == 0)
-- count++;
--
-- res = kzalloc((count + 1)*sizeof(*res), GFP_KERNEL);
-- count = 0;
-- while (cplen > 0) {
-- res[count] = cp;
-- l = strlen(cp) + 1;
-- cp += l;
-- cplen -= l;
-- count++;
-- }
-- return res;
--}
--
--static void of_free_probes(const char * const *probes)
--{
-- if (probes != part_probe_types_def)
-- kfree(probes);
--}
--
- static struct of_device_id of_flash_match[];
- static int of_flash_probe(struct platform_device *dev)
- {
-- const char * const *part_probe_types;
- const struct of_device_id *match;
- struct device_node *dp = dev->dev.of_node;
- struct resource res;
-@@ -302,10 +266,8 @@ static int of_flash_probe(struct platfor
- goto err_out;
-
- ppdata.of_node = dp;
-- part_probe_types = of_get_probes(dp);
-- mtd_device_parse_register(info->cmtd, part_probe_types, &ppdata,
-+ mtd_device_parse_register(info->cmtd, part_probe_types_def, &ppdata,
- NULL, 0);
-- of_free_probes(part_probe_types);
-
- kfree(mtd_list);
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -29,6 +29,7 @@
- #include <linux/kmod.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/of.h>
- #include <linux/err.h>
-
- #include "mtdcore.h"
-@@ -702,6 +703,40 @@ void deregister_mtd_parser(struct mtd_pa
- EXPORT_SYMBOL_GPL(deregister_mtd_parser);
-
- /*
-+ * Parses the linux,part-probe device tree property.
-+ * When a non null value is returned it has to be freed with kfree() by
-+ * the caller.
-+ */
-+static const char * const *of_get_probes(struct device_node *dp)
-+{
-+ const char *cp;
-+ int cplen;
-+ unsigned int l;
-+ unsigned int count;
-+ const char **res;
-+
-+ cp = of_get_property(dp, "linux,part-probe", &cplen);
-+ if (cp == NULL)
-+ return NULL;
-+
-+ count = 0;
-+ for (l = 0; l != cplen; l++)
-+ if (cp[l] == 0)
-+ count++;
-+
-+ res = kzalloc((count + 1) * sizeof(*res), GFP_KERNEL);
-+ count = 0;
-+ while (cplen > 0) {
-+ res[count] = cp;
-+ l = strlen(cp) + 1;
-+ cp += l;
-+ cplen -= l;
-+ count++;
-+ }
-+ return res;
-+}
-+
-+/*
- * Do not forget to update 'parse_mtd_partitions()' kerneldoc comment if you
- * are changing this array!
- */
-@@ -737,6 +772,13 @@ int parse_mtd_partitions(struct mtd_info
- {
- struct mtd_part_parser *parser;
- int ret = 0;
-+ const char *const *types_of = NULL;
-+
-+ if (data && data->of_node) {
-+ types_of = of_get_probes(data->of_node);
-+ if (types_of != NULL)
-+ types = types_of;
-+ }
-
- if (!types)
- types = default_mtd_part_types;
-@@ -755,6 +797,7 @@ int parse_mtd_partitions(struct mtd_info
- break;
- }
- }
-+ kfree(types_of);
- return ret;
- }
-
+++ /dev/null
-From dfe4b4c732365fc1d83c2d2fd9cc18054ae850b7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sun, 6 Dec 2015 11:24:05 +0100
-Subject: [PATCH] mtd: bcm47xxpart: don't fail because of bit-flips
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Bit-flip errors may occur on NAND flashes and are harmless. Handle them
-gracefully as read content is still reliable and can be parsed.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/mtd/bcm47xxpart.c | 38 ++++++++++++++++++++++----------------
- 1 file changed, 22 insertions(+), 16 deletions(-)
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -66,11 +66,13 @@ static const char *bcm47xxpart_trx_data_
- {
- uint32_t buf;
- size_t bytes_read;
-+ int err;
-
-- if (mtd_read(master, offset, sizeof(buf), &bytes_read,
-- (uint8_t *)&buf) < 0) {
-- pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
-- offset);
-+ err = mtd_read(master, offset, sizeof(buf), &bytes_read,
-+ (uint8_t *)&buf);
-+ if (err && !mtd_is_bitflip(err)) {
-+ pr_err("mtd_read error while parsing (offset: 0x%X): %d\n",
-+ offset, err);
- goto out_default;
- }
-
-@@ -95,6 +97,7 @@ static int bcm47xxpart_parse(struct mtd_
- int trx_part = -1;
- int last_trx_part = -1;
- int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
-+ int err;
-
- /*
- * Some really old flashes (like AT45DB*) had smaller erasesize-s, but
-@@ -128,10 +131,11 @@ static int bcm47xxpart_parse(struct mtd_
- }
-
- /* Read beginning of the block */
-- if (mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ,
-- &bytes_read, (uint8_t *)buf) < 0) {
-- pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
-- offset);
-+ err = mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ,
-+ &bytes_read, (uint8_t *)buf);
-+ if (err && !mtd_is_bitflip(err)) {
-+ pr_err("mtd_read error while parsing (offset: 0x%X): %d\n",
-+ offset, err);
- continue;
- }
-
-@@ -252,10 +256,11 @@ static int bcm47xxpart_parse(struct mtd_
- }
-
- /* Read middle of the block */
-- if (mtd_read(master, offset + 0x8000, 0x4,
-- &bytes_read, (uint8_t *)buf) < 0) {
-- pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
-- offset);
-+ err = mtd_read(master, offset + 0x8000, 0x4, &bytes_read,
-+ (uint8_t *)buf);
-+ if (err && !mtd_is_bitflip(err)) {
-+ pr_err("mtd_read error while parsing (offset: 0x%X): %d\n",
-+ offset, err);
- continue;
- }
-
-@@ -275,10 +280,11 @@ static int bcm47xxpart_parse(struct mtd_
- }
-
- offset = master->size - possible_nvram_sizes[i];
-- if (mtd_read(master, offset, 0x4, &bytes_read,
-- (uint8_t *)buf) < 0) {
-- pr_err("mtd_read error while reading at offset 0x%X!\n",
-- offset);
-+ err = mtd_read(master, offset, 0x4, &bytes_read,
-+ (uint8_t *)buf);
-+ if (err && !mtd_is_bitflip(err)) {
-+ pr_err("mtd_read error while reading (offset 0x%X): %d\n",
-+ offset, err);
- continue;
- }
-
+++ /dev/null
-From 9612e686b235dc9e33c8dfb5e6d2ff2b2140fb9d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Tue, 16 Jun 2015 21:01:30 +0200
-Subject: [PATCH V2] usb: xhci: make USB_XHCI_PLATFORM selectable
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Right now xhci-plat-hcd can be built when using one of platform specific
-drivers only (mvebu/rcar). There shouldn't be such limitation as some
-platforms may not require any quirks and may want to just use a generic
-driver ("generic-xhci" / "xhci-hcd").
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-Greg/Mathias: I'm not sure if it's more like USB subsystem stuff or xHCI
-Could you decide which one of you could pick that, please?
-
-V2: Drop useless "default n", thanks Sergei :)
----
- drivers/usb/host/Kconfig | 9 ++++++++-
- 1 file changed, 8 insertions(+), 1 deletion(-)
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -32,7 +32,14 @@ config USB_XHCI_PCI
- default y
-
- config USB_XHCI_PLATFORM
-- tristate
-+ tristate "Generic xHCI driver for a platform device"
-+ ---help---
-+ Adds an xHCI host driver for a generic platform device, which
-+ provides a memory space and an irq.
-+ It is also a prerequisite for platform specific drivers that
-+ implement some extra quirks.
-+
-+ If unsure, say N.
-
- config USB_XHCI_MVEBU
- tristate "xHCI support for Marvell Armada 375/38x"
+++ /dev/null
-From 4a0e3e989d66bb7204b163d9cfaa7fa96d0f2023 Mon Sep 17 00:00:00 2001
-From: Enrico Mioso <mrkiko.rs@gmail.com>
-Date: Wed, 8 Jul 2015 13:05:57 +0200
-Subject: [PATCH] cdc_ncm: Add support for moving NDP to end of NCM frame
-
-NCM specs are not actually mandating a specific position in the frame for
-the NDP (Network Datagram Pointer). However, some Huawei devices will
-ignore our aggregates if it is not placed after the datagrams it points
-to. Add support for doing just this, in a per-device configurable way.
-While at it, update NCM subdrivers, disabling this functionality in all of
-them, except in huawei_cdc_ncm where it is enabled instead.
-We aren't making any distinction between different Huawei NCM devices,
-based on what the vendor driver does. Standard NCM devices are left
-unaffected: if they are compliant, they should be always usable, still
-stay on the safe side.
-
-This change has been tested and working with a Huawei E3131 device (which
-works regardless of NDP position), a Huawei E3531 (also working both
-ways) and an E3372 (which mandates NDP to be after indexed datagrams).
-
-V1->V2:
-- corrected wrong NDP acronym definition
-- fixed possible NULL pointer dereference
-- patch cleanup
-V2->V3:
-- Properly account for the NDP size when writing new packets to SKB
-
-Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/cdc_mbim.c | 2 +-
- drivers/net/usb/cdc_ncm.c | 61 ++++++++++++++++++++++++++++++++++++----
- drivers/net/usb/huawei_cdc_ncm.c | 7 +++--
- include/linux/usb/cdc_ncm.h | 7 ++++-
- 4 files changed, 67 insertions(+), 10 deletions(-)
-
---- a/drivers/net/usb/cdc_mbim.c
-+++ b/drivers/net/usb/cdc_mbim.c
-@@ -158,7 +158,7 @@ static int cdc_mbim_bind(struct usbnet *
- if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
- goto err;
-
-- ret = cdc_ncm_bind_common(dev, intf, data_altsetting);
-+ ret = cdc_ncm_bind_common(dev, intf, data_altsetting, 0);
- if (ret)
- goto err;
-
---- a/drivers/net/usb/cdc_ncm.c
-+++ b/drivers/net/usb/cdc_ncm.c
-@@ -684,10 +684,12 @@ static void cdc_ncm_free(struct cdc_ncm_
- ctx->tx_curr_skb = NULL;
- }
-
-+ kfree(ctx->delayed_ndp16);
-+
- kfree(ctx);
- }
-
--int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting)
-+int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting, int drvflags)
- {
- const struct usb_cdc_union_desc *union_desc = NULL;
- struct cdc_ncm_ctx *ctx;
-@@ -859,6 +861,17 @@ advance:
- /* finish setting up the device specific data */
- cdc_ncm_setup(dev);
-
-+ /* Device-specific flags */
-+ ctx->drvflags = drvflags;
-+
-+ /* Allocate the delayed NDP if needed. */
-+ if (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END) {
-+ ctx->delayed_ndp16 = kzalloc(ctx->max_ndp_size, GFP_KERNEL);
-+ if (!ctx->delayed_ndp16)
-+ goto error2;
-+ dev_info(&intf->dev, "NDP will be placed at end of frame for this device.");
-+ }
-+
- /* override ethtool_ops */
- dev->net->ethtool_ops = &cdc_ncm_ethtool_ops;
-
-@@ -956,8 +969,11 @@ static int cdc_ncm_bind(struct usbnet *d
- if (cdc_ncm_select_altsetting(intf) != CDC_NCM_COMM_ALTSETTING_NCM)
- return -ENODEV;
-
-- /* The NCM data altsetting is fixed */
-- return cdc_ncm_bind_common(dev, intf, CDC_NCM_DATA_ALTSETTING_NCM);
-+ /* The NCM data altsetting is fixed, so we hard-coded it.
-+ * Additionally, generic NCM devices are assumed to accept arbitrarily
-+ * placed NDP.
-+ */
-+ return cdc_ncm_bind_common(dev, intf, CDC_NCM_DATA_ALTSETTING_NCM, 0);
- }
-
- static void cdc_ncm_align_tail(struct sk_buff *skb, size_t modulus, size_t remainder, size_t max)
-@@ -979,6 +995,14 @@ static struct usb_cdc_ncm_ndp16 *cdc_ncm
- struct usb_cdc_ncm_nth16 *nth16 = (void *)skb->data;
- size_t ndpoffset = le16_to_cpu(nth16->wNdpIndex);
-
-+ /* If NDP should be moved to the end of the NCM package, we can't follow the
-+ * NTH16 header as we would normally do. NDP isn't written to the SKB yet, and
-+ * the wNdpIndex field in the header is actually not consistent with reality. It will be later.
-+ */
-+ if (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END)
-+ if (ctx->delayed_ndp16->dwSignature == sign)
-+ return ctx->delayed_ndp16;
-+
- /* follow the chain of NDPs, looking for a match */
- while (ndpoffset) {
- ndp16 = (struct usb_cdc_ncm_ndp16 *)(skb->data + ndpoffset);
-@@ -988,7 +1012,8 @@ static struct usb_cdc_ncm_ndp16 *cdc_ncm
- }
-
- /* align new NDP */
-- cdc_ncm_align_tail(skb, ctx->tx_ndp_modulus, 0, ctx->tx_max);
-+ if (!(ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END))
-+ cdc_ncm_align_tail(skb, ctx->tx_ndp_modulus, 0, ctx->tx_max);
-
- /* verify that there is room for the NDP and the datagram (reserve) */
- if ((ctx->tx_max - skb->len - reserve) < ctx->max_ndp_size)
-@@ -1001,7 +1026,11 @@ static struct usb_cdc_ncm_ndp16 *cdc_ncm
- nth16->wNdpIndex = cpu_to_le16(skb->len);
-
- /* push a new empty NDP */
-- ndp16 = (struct usb_cdc_ncm_ndp16 *)memset(skb_put(skb, ctx->max_ndp_size), 0, ctx->max_ndp_size);
-+ if (!(ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END))
-+ ndp16 = (struct usb_cdc_ncm_ndp16 *)memset(skb_put(skb, ctx->max_ndp_size), 0, ctx->max_ndp_size);
-+ else
-+ ndp16 = ctx->delayed_ndp16;
-+
- ndp16->dwSignature = sign;
- ndp16->wLength = cpu_to_le16(sizeof(struct usb_cdc_ncm_ndp16) + sizeof(struct usb_cdc_ncm_dpe16));
- return ndp16;
-@@ -1016,6 +1045,15 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev
- struct sk_buff *skb_out;
- u16 n = 0, index, ndplen;
- u8 ready2send = 0;
-+ u32 delayed_ndp_size;
-+
-+ /* When our NDP gets written in cdc_ncm_ndp(), then skb_out->len gets updated
-+ * accordingly. Otherwise, we should check here.
-+ */
-+ if (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END)
-+ delayed_ndp_size = ctx->max_ndp_size;
-+ else
-+ delayed_ndp_size = 0;
-
- /* if there is a remaining skb, it gets priority */
- if (skb != NULL) {
-@@ -1070,7 +1108,7 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev
- cdc_ncm_align_tail(skb_out, ctx->tx_modulus, ctx->tx_remainder, ctx->tx_max);
-
- /* check if we had enough room left for both NDP and frame */
-- if (!ndp16 || skb_out->len + skb->len > ctx->tx_max) {
-+ if (!ndp16 || skb_out->len + skb->len + delayed_ndp_size > ctx->tx_max) {
- if (n == 0) {
- /* won't fit, MTU problem? */
- dev_kfree_skb_any(skb);
-@@ -1143,6 +1181,17 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev
- /* variables will be reset at next call */
- }
-
-+ /* If requested, put NDP at end of frame. */
-+ if (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END) {
-+ nth16 = (struct usb_cdc_ncm_nth16 *)skb_out->data;
-+ cdc_ncm_align_tail(skb_out, ctx->tx_ndp_modulus, 0, ctx->tx_max);
-+ nth16->wNdpIndex = cpu_to_le16(skb_out->len);
-+ memcpy(skb_put(skb_out, ctx->max_ndp_size), ctx->delayed_ndp16, ctx->max_ndp_size);
-+
-+ /* Zero out delayed NDP - signature checking will naturally fail. */
-+ ndp16 = memset(ctx->delayed_ndp16, 0, ctx->max_ndp_size);
-+ }
-+
- /* If collected data size is less or equal ctx->min_tx_pkt
- * bytes, we send buffers as it is. If we get more data, it
- * would be more efficient for USB HS mobile device with DMA
---- a/drivers/net/usb/huawei_cdc_ncm.c
-+++ b/drivers/net/usb/huawei_cdc_ncm.c
-@@ -73,11 +73,14 @@ static int huawei_cdc_ncm_bind(struct us
- struct usb_driver *subdriver = ERR_PTR(-ENODEV);
- int ret = -ENODEV;
- struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
-+ int drvflags = 0;
-
- /* altsetting should always be 1 for NCM devices - so we hard-coded
-- * it here
-+ * it here. Some huawei devices will need the NDP part of the NCM package to
-+ * be at the end of the frame.
- */
-- ret = cdc_ncm_bind_common(usbnet_dev, intf, 1);
-+ drvflags |= CDC_NCM_FLAG_NDP_TO_END;
-+ ret = cdc_ncm_bind_common(usbnet_dev, intf, 1, drvflags);
- if (ret)
- goto err;
-
---- a/include/linux/usb/cdc_ncm.h
-+++ b/include/linux/usb/cdc_ncm.h
-@@ -80,6 +80,9 @@
- #define CDC_NCM_TIMER_INTERVAL_MIN 5UL
- #define CDC_NCM_TIMER_INTERVAL_MAX (U32_MAX / NSEC_PER_USEC)
-
-+/* Driver flags */
-+#define CDC_NCM_FLAG_NDP_TO_END 0x02 /* NDP is placed at end of frame */
-+
- #define cdc_ncm_comm_intf_is_mbim(x) ((x)->desc.bInterfaceSubClass == USB_CDC_SUBCLASS_MBIM && \
- (x)->desc.bInterfaceProtocol == USB_CDC_PROTO_NONE)
- #define cdc_ncm_data_intf_is_mbim(x) ((x)->desc.bInterfaceProtocol == USB_CDC_MBIM_PROTO_NTB)
-@@ -103,9 +106,11 @@ struct cdc_ncm_ctx {
-
- spinlock_t mtx;
- atomic_t stop;
-+ int drvflags;
-
- u32 timer_interval;
- u32 max_ndp_size;
-+ struct usb_cdc_ncm_ndp16 *delayed_ndp16;
-
- u32 tx_timer_pending;
- u32 tx_curr_frame_num;
-@@ -133,7 +138,7 @@ struct cdc_ncm_ctx {
- };
-
- u8 cdc_ncm_select_altsetting(struct usb_interface *intf);
--int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting);
-+int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting, int drvflags);
- void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf);
- struct sk_buff *cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign);
- int cdc_ncm_rx_verify_nth16(struct cdc_ncm_ctx *ctx, struct sk_buff *skb_in);
+++ /dev/null
-From 128524b9db3e4f4245226852bee771bd03db75be Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz@true.cz>
-Date: Tue, 3 Nov 2015 11:01:42 +0100
-Subject: [PATCH 1/2] USB: qcserial: Add support for Quectel EC20 Mini PCIe
- module
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It seems like this device has same vendor and product IDs as G2K
-devices, but it has different number of interfaces(4 vs 5) and also
-different interface layout which makes it currently unusable:
-
- usbcore: registered new interface driver qcserial
- usbserial: USB Serial support registered for Qualcomm USB modem
- usb 2-1.2: unknown number of interfaces: 5
-
-lsusb output:
-
- Bus 002 Device 003: ID 05c6:9215 Qualcomm, Inc. Acer Gobi 2000 Wireless
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 2.00
- bDeviceClass 0 (Defined at Interface level)
- bDeviceSubClass 0
- bDeviceProtocol 0
- bMaxPacketSize0 64
- idVendor 0x05c6 Qualcomm, Inc.
- idProduct 0x9215 Acer Gobi 2000 Wireless Modem
- bcdDevice 2.32
- iManufacturer 1 Quectel
- iProduct 2 Quectel LTE Module
- iSerial 0
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 209
- bNumInterfaces 5
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xa0
- (Bus Powered)
- Remote Wakeup
- MaxPower 500mA
-
-Signed-off-by: Petr Štetiar <ynezz@true.cz>
----
- drivers/usb/serial/qcserial.c | 39 +++++++++++++++++++++++++++++++++++++++
- 1 file changed, 39 insertions(+)
-
---- a/drivers/usb/serial/qcserial.c
-+++ b/drivers/usb/serial/qcserial.c
-@@ -22,6 +22,8 @@
- #define DRIVER_AUTHOR "Qualcomm Inc"
- #define DRIVER_DESC "Qualcomm USB Serial driver"
-
-+#define QUECTEL_EC20_IDPRODUCT 0x9215
-+
- /* standard device layouts supported by this driver */
- enum qcserial_layouts {
- QCSERIAL_G2K = 0, /* Gobi 2000 */
-@@ -176,6 +178,38 @@ static const struct usb_device_id id_tab
- };
- MODULE_DEVICE_TABLE(usb, id_table);
-
-+static int handle_quectel_ec20(struct device *dev, int ifnum)
-+{
-+ int altsetting = 0;
-+
-+ /*
-+ * Quectel EC20 Mini PCIe LTE module layout:
-+ * 0: DM/DIAG (use libqcdm from ModemManager for communication)
-+ * 1: NMEA
-+ * 2: AT-capable modem port
-+ * 3: Modem interface
-+ * 4: NDIS
-+ */
-+ switch (ifnum) {
-+ case 0:
-+ dev_dbg(dev, "Quectel EC20 DM/DIAG interface found\n");
-+ break;
-+ case 1:
-+ dev_dbg(dev, "Quectel EC20 NMEA GPS interface found\n");
-+ break;
-+ case 2:
-+ case 3:
-+ dev_dbg(dev, "Quectel EC20 Modem port found\n");
-+ break;
-+ case 4:
-+ /* Don't claim the QMI/net interface */
-+ altsetting = -1;
-+ break;
-+ }
-+
-+ return altsetting;
-+}
-+
- static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
- {
- struct usb_host_interface *intf = serial->interface->cur_altsetting;
-@@ -244,6 +278,11 @@ static int qcprobe(struct usb_serial *se
- altsetting = -1;
- break;
- case QCSERIAL_G2K:
-+ if (nintf == 5 && id->idProduct == QUECTEL_EC20_IDPRODUCT) {
-+ altsetting = handle_quectel_ec20(dev, ifnum);
-+ goto done;
-+ }
-+
- /*
- * Gobi 2K+ USB layout:
- * 0: QMI/net
+++ /dev/null
-From fe29727caa7fe434fcb3166df2a62672bc516b54 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz@true.cz>
-Date: Wed, 4 Nov 2015 16:23:37 +0100
-Subject: [PATCH 2/2] USB: qmi_wwan: Add quirk for Quectel EC20 Mini PCIe
- module
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This device has same vendor and product IDs as G2K devices, but it has
-different number of interfaces(4 vs 5) and also different interface
-layout where EC20 has QMI on interface 4 instead of 0.
-
-lsusb output:
-
- Bus 002 Device 003: ID 05c6:9215 Qualcomm, Inc. Acer Gobi 2000
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 2.00
- bDeviceClass 0 (Defined at Interface level)
- bDeviceSubClass 0
- bDeviceProtocol 0
- bMaxPacketSize0 64
- idVendor 0x05c6 Qualcomm, Inc.
- idProduct 0x9215 Acer Gobi 2000 Wireless Modem
- bcdDevice 2.32
- iManufacturer 1 Quectel
- iProduct 2 Quectel LTE Module
- iSerial 0
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 209
- bNumInterfaces 5
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xa0
- (Bus Powered)
- Remote Wakeup
- MaxPower 500mA
-
-Signed-off-by: Petr Štetiar <ynezz@true.cz>
----
- drivers/net/usb/qmi_wwan.c | 21 +++++++++++++++++++++
- 1 file changed, 21 insertions(+)
-
---- a/drivers/net/usb/qmi_wwan.c
-+++ b/drivers/net/usb/qmi_wwan.c
-@@ -825,6 +825,7 @@ static const struct usb_device_id produc
- {QMI_GOBI_DEVICE(0x05c6, 0x9245)}, /* Samsung Gobi 2000 Modem device (VL176) */
- {QMI_GOBI_DEVICE(0x03f0, 0x251d)}, /* HP Gobi 2000 Modem device (VP412) */
- {QMI_GOBI_DEVICE(0x05c6, 0x9215)}, /* Acer Gobi 2000 Modem device (VP413) */
-+ {QMI_FIXED_INTF(0x05c6, 0x9215, 4)}, /* Quectel EC20 Mini PCIe */
- {QMI_GOBI_DEVICE(0x05c6, 0x9265)}, /* Asus Gobi 2000 Modem device (VR305) */
- {QMI_GOBI_DEVICE(0x05c6, 0x9235)}, /* Top Global Gobi 2000 Modem device (VR306) */
- {QMI_GOBI_DEVICE(0x05c6, 0x9275)}, /* iRex Technologies Gobi 2000 Modem device (VR307) */
-@@ -856,10 +857,24 @@ static const struct usb_device_id produc
- };
- MODULE_DEVICE_TABLE(usb, products);
-
-+static bool quectel_ec20_detected(struct usb_interface *intf)
-+{
-+ struct usb_device *dev = interface_to_usbdev(intf);
-+
-+ if (dev->actconfig &&
-+ le16_to_cpu(dev->descriptor.idVendor) == 0x05c6 &&
-+ le16_to_cpu(dev->descriptor.idProduct) == 0x9215 &&
-+ dev->actconfig->desc.bNumInterfaces == 5)
-+ return true;
-+
-+ return false;
-+}
-+
- static int qmi_wwan_probe(struct usb_interface *intf,
- const struct usb_device_id *prod)
- {
- struct usb_device_id *id = (struct usb_device_id *)prod;
-+ struct usb_interface_descriptor *desc = &intf->cur_altsetting->desc;
-
- /* Workaround to enable dynamic IDs. This disables usbnet
- * blacklisting functionality. Which, if required, can be
-@@ -871,6 +886,12 @@ static int qmi_wwan_probe(struct usb_int
- id->driver_info = (unsigned long)&qmi_wwan_info;
- }
-
-+ /* Quectel EC20 quirk where we've QMI on interface 4 instead of 0 */
-+ if (quectel_ec20_detected(intf) && desc->bInterfaceNumber == 0) {
-+ dev_dbg(&intf->dev, "Quectel EC20 quirk, skipping interface 0\n");
-+ return -ENODEV;
-+ }
-+
- return usbnet_probe(intf, id);
- }
-
+++ /dev/null
---- a/scripts/setlocalversion
-+++ b/scripts/setlocalversion
-@@ -165,7 +165,7 @@ else
- # annotated or signed tagged state (as git describe only
- # looks at signed or annotated tags - git tag -a/-s) and
- # LOCALVERSION= is not specified
-- if test "${LOCALVERSION+set}" != "set"; then
-+ if test "${CONFIG_LOCALVERSION+set}" != "set"; then
- scm=$(scm_version --short)
- res="$res${scm:++}"
- fi
+++ /dev/null
---- a/Makefile
-+++ b/Makefile
-@@ -618,9 +618,9 @@ KBUILD_CFLAGS += $(call cc-option,-fno-P
- KBUILD_AFLAGS += $(call cc-option,-fno-PIE)
-
- ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
--KBUILD_CFLAGS += -Os $(call cc-disable-warning,maybe-uninitialized,)
-+KBUILD_CFLAGS += -Os $(EXTRA_OPTIMIZATION) $(call cc-disable-warning,maybe-uninitialized,)
- else
--KBUILD_CFLAGS += -O2
-+KBUILD_CFLAGS += -O2 -fno-reorder-blocks -fno-tree-ch $(EXTRA_OPTIMIZATION)
- endif
-
- # Tell gcc to never replace conditional load with a non-conditional one
+++ /dev/null
---- a/Makefile
-+++ b/Makefile
-@@ -409,7 +409,7 @@ KBUILD_CFLAGS_KERNEL :=
- KBUILD_AFLAGS := -D__ASSEMBLY__
- KBUILD_AFLAGS_MODULE := -DMODULE
- KBUILD_CFLAGS_MODULE := -DMODULE
--KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
-+KBUILD_LDFLAGS_MODULE = -T $(srctree)/scripts/module-common.lds $(if $(CONFIG_PROFILING),,-s)
-
- # Read KERNELRELEASE from include/config/kernel.release (if it exists)
- KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
+++ /dev/null
---- a/scripts/kallsyms.c
-+++ b/scripts/kallsyms.c
-@@ -58,6 +58,7 @@ static struct addr_range percpu_range =
- static struct sym_entry *table;
- static unsigned int table_size, table_cnt;
- static int all_symbols = 0;
-+static int uncompressed = 0;
- static int absolute_percpu = 0;
- static char symbol_prefix_char = '\0';
- static unsigned long long kernel_start_addr = 0;
-@@ -392,6 +393,9 @@ static void write_src(void)
-
- free(markers);
-
-+ if (uncompressed)
-+ return;
-+
- output_label("kallsyms_token_table");
- off = 0;
- for (i = 0; i < 256; i++) {
-@@ -450,6 +454,9 @@ static void *find_token(unsigned char *s
- {
- int i;
-
-+ if (uncompressed)
-+ return NULL;
-+
- for (i = 0; i < len - 1; i++) {
- if (str[i] == token[0] && str[i+1] == token[1])
- return &str[i];
-@@ -522,6 +529,9 @@ static void optimize_result(void)
- {
- int i, best;
-
-+ if (uncompressed)
-+ return;
-+
- /* using the '\0' symbol last allows compress_symbols to use standard
- * fast string functions */
- for (i = 255; i >= 0; i--) {
-@@ -692,7 +702,9 @@ int main(int argc, char **argv)
- } else if (strncmp(argv[i], "--page-offset=", 14) == 0) {
- const char *p = &argv[i][14];
- kernel_start_addr = strtoull(p, NULL, 16);
-- } else
-+ } else if (strcmp(argv[i], "--uncompressed") == 0)
-+ uncompressed = 1;
-+ else
- usage();
- }
- } else if (argc != 1)
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -1338,6 +1338,17 @@ config SYSCTL_ARCH_UNALIGN_ALLOW
- the unaligned access emulation.
- see arch/parisc/kernel/unaligned.c for reference
-
-+config KALLSYMS_UNCOMPRESSED
-+ bool "Keep kallsyms uncompressed"
-+ depends on KALLSYMS
-+ help
-+ Normally kallsyms contains compressed symbols (using a token table),
-+ reducing the uncompressed kernel image size. Keeping the symbol table
-+ uncompressed significantly improves the size of this part in compressed
-+ kernel images.
-+
-+ Say N unless you need compressed kernel images to be small.
-+
- config HAVE_PCSPKR_PLATFORM
- bool
-
---- a/scripts/link-vmlinux.sh
-+++ b/scripts/link-vmlinux.sh
-@@ -90,6 +90,10 @@ kallsyms()
- kallsymopt="${kallsymopt} --absolute-percpu"
- fi
-
-+ if [ -n "${CONFIG_KALLSYMS_UNCOMPRESSED}" ]; then
-+ kallsymopt="${kallsymopt} --uncompressed"
-+ fi
-+
- local aflags="${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL} \
- ${NOSTDINC_FLAGS} ${LINUXINCLUDE} ${KBUILD_CPPFLAGS}"
-
---- a/kernel/kallsyms.c
-+++ b/kernel/kallsyms.c
-@@ -109,6 +109,11 @@ static unsigned int kallsyms_expand_symb
- * For every byte on the compressed symbol data, copy the table
- * entry for that byte.
- */
-+#ifdef CONFIG_KALLSYMS_UNCOMPRESSED
-+ memcpy(result, data + 1, len - 1);
-+ result += len - 1;
-+ len = 0;
-+#endif
- while (len) {
- tptr = &kallsyms_token_table[kallsyms_token_index[*data]];
- data++;
-@@ -141,6 +146,9 @@ tail:
- */
- static char kallsyms_get_symbol_type(unsigned int off)
- {
-+#ifdef CONFIG_KALLSYMS_UNCOMPRESSED
-+ return kallsyms_names[off + 1];
-+#endif
- /*
- * Get just the first code, look it up in the token table,
- * and return the first char from this token.
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: [PATCH] build: add a hack for removing non-essential module info
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
---- a/include/linux/module.h
-+++ b/include/linux/module.h
-@@ -84,6 +84,7 @@ void trim_init_extable(struct module *m)
-
- /* Generic info of form tag = "info" */
- #define MODULE_INFO(tag, info) __MODULE_INFO(tag, tag, info)
-+#define MODULE_INFO_STRIP(tag, info) __MODULE_INFO_STRIP(tag, tag, info)
-
- /* For userspace: you can also call me... */
- #define MODULE_ALIAS(_alias) MODULE_INFO(alias, _alias)
-@@ -127,12 +128,12 @@ void trim_init_extable(struct module *m)
- * Author(s), use "Name <email>" or just "Name", for multiple
- * authors use multiple MODULE_AUTHOR() statements/lines.
- */
--#define MODULE_AUTHOR(_author) MODULE_INFO(author, _author)
-+#define MODULE_AUTHOR(_author) MODULE_INFO_STRIP(author, _author)
-
- /* What your module does. */
--#define MODULE_DESCRIPTION(_description) MODULE_INFO(description, _description)
-+#define MODULE_DESCRIPTION(_description) MODULE_INFO_STRIP(description, _description)
-
--#ifdef MODULE
-+#if defined(MODULE) && !defined(CONFIG_MODULE_STRIPPED)
- /* Creates an alias so file2alias.c can find device table. */
- #define MODULE_DEVICE_TABLE(type, name) \
- extern const typeof(name) __mod_##type##__##name##_device_table \
-@@ -159,7 +160,9 @@ extern const typeof(name) __mod_##type##
- */
-
- #if defined(MODULE) || !defined(CONFIG_SYSFS)
--#define MODULE_VERSION(_version) MODULE_INFO(version, _version)
-+#define MODULE_VERSION(_version) MODULE_INFO_STRIP(version, _version)
-+#elif defined(CONFIG_MODULE_STRIPPED)
-+#define MODULE_VERSION(_version) __MODULE_INFO_DISABLED(version)
- #else
- #define MODULE_VERSION(_version) \
- static struct module_version_attribute ___modver_attr = { \
-@@ -181,7 +184,7 @@ extern const typeof(name) __mod_##type##
- /* Optional firmware file (or files) needed by the module
- * format is simply firmware file name. Multiple firmware
- * files require multiple MODULE_FIRMWARE() specifiers */
--#define MODULE_FIRMWARE(_firmware) MODULE_INFO(firmware, _firmware)
-+#define MODULE_FIRMWARE(_firmware) MODULE_INFO_STRIP(firmware, _firmware)
-
- /* Given an address, look for it in the exception tables */
- const struct exception_table_entry *search_exception_tables(unsigned long add);
---- a/include/linux/moduleparam.h
-+++ b/include/linux/moduleparam.h
-@@ -16,6 +16,16 @@
- /* Chosen so that structs with an unsigned long line up. */
- #define MAX_PARAM_PREFIX_LEN (64 - sizeof(unsigned long))
-
-+/* This struct is here for syntactic coherency, it is not used */
-+#define __MODULE_INFO_DISABLED(name) \
-+ struct __UNIQUE_ID(name) {}
-+
-+#ifdef CONFIG_MODULE_STRIPPED
-+#define __MODULE_INFO_STRIP(tag, name, info) __MODULE_INFO_DISABLED(name)
-+#else
-+#define __MODULE_INFO_STRIP(tag, name, info) __MODULE_INFO(tag, name, info)
-+#endif
-+
- #ifdef MODULE
- #define __MODULE_INFO(tag, name, info) \
- static const char __UNIQUE_ID(name)[] \
-@@ -23,8 +33,7 @@ static const char __UNIQUE_ID(name)[]
- = __stringify(tag) "=" info
- #else /* !MODULE */
- /* This struct is here for syntactic coherency, it is not used */
--#define __MODULE_INFO(tag, name, info) \
-- struct __UNIQUE_ID(name) {}
-+#define __MODULE_INFO(tag, name, info) __MODULE_INFO_DISABLED(name)
- #endif
- #define __MODULE_PARM_TYPE(name, _type) \
- __MODULE_INFO(parmtype, name##type, #name ":" _type)
-@@ -32,7 +41,7 @@ static const char __UNIQUE_ID(name)[]
- /* One for each parameter, describing how to use it. Some files do
- multiple of these per line, so can't just use MODULE_INFO. */
- #define MODULE_PARM_DESC(_parm, desc) \
-- __MODULE_INFO(parm, _parm, #_parm ":" desc)
-+ __MODULE_INFO_STRIP(parm, _parm, #_parm ":" desc)
-
- struct kernel_param;
-
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -1987,6 +1987,13 @@ config MODULE_COMPRESS_XZ
-
- endchoice
-
-+config MODULE_STRIPPED
-+ bool "Reduce module size"
-+ depends on MODULES
-+ help
-+ Remove module parameter descriptions, author info, version, aliases,
-+ device tables, etc.
-+
- endif # MODULES
-
- config INIT_ALL_POSSIBLE
---- a/kernel/module.c
-+++ b/kernel/module.c
-@@ -2699,6 +2699,7 @@ static struct module *setup_load_info(st
-
- static int check_modinfo(struct module *mod, struct load_info *info, int flags)
- {
-+#ifndef CONFIG_MODULE_STRIPPED
- const char *modmagic = get_modinfo(info, "vermagic");
- int err;
-
-@@ -2724,6 +2725,7 @@ static int check_modinfo(struct module *
- pr_warn("%s: module is from the staging directory, the quality "
- "is unknown, you have been warned.\n", mod->name);
- }
-+#endif
-
- /* Set up license info based on the info section */
- set_license(mod, get_modinfo(info, "license"));
---- a/scripts/mod/modpost.c
-+++ b/scripts/mod/modpost.c
-@@ -1758,7 +1758,9 @@ static void read_symbols(char *modname)
- symname = remove_dot(info.strtab + sym->st_name);
-
- handle_modversions(mod, &info, sym, symname);
-+#ifndef CONFIG_MODULE_STRIPPED
- handle_moddevtable(mod, &info, sym, symname);
-+#endif
- }
- if (!is_vmlinux(modname) ||
- (is_vmlinux(modname) && vmlinux_section_warnings))
-@@ -1902,7 +1904,9 @@ static void add_header(struct buffer *b,
- buf_printf(b, "#include <linux/vermagic.h>\n");
- buf_printf(b, "#include <linux/compiler.h>\n");
- buf_printf(b, "\n");
-+#ifndef CONFIG_MODULE_STRIPPED
- buf_printf(b, "MODULE_INFO(vermagic, VERMAGIC_STRING);\n");
-+#endif
- buf_printf(b, "\n");
- buf_printf(b, "__visible struct module __this_module\n");
- buf_printf(b, "__attribute__((section(\".gnu.linkonce.this_module\"))) = {\n");
-@@ -1919,16 +1923,20 @@ static void add_header(struct buffer *b,
-
- static void add_intree_flag(struct buffer *b, int is_intree)
- {
-+#ifndef CONFIG_MODULE_STRIPPED
- if (is_intree)
- buf_printf(b, "\nMODULE_INFO(intree, \"Y\");\n");
-+#endif
- }
-
- static void add_staging_flag(struct buffer *b, const char *name)
- {
-+#ifndef CONFIG_MODULE_STRIPPED
- static const char *staging_dir = "drivers/staging";
-
- if (strncmp(staging_dir, name, strlen(staging_dir)) == 0)
- buf_printf(b, "\nMODULE_INFO(staging, \"Y\");\n");
-+#endif
- }
-
- /**
-@@ -2021,11 +2029,13 @@ static void add_depends(struct buffer *b
-
- static void add_srcversion(struct buffer *b, struct module *mod)
- {
-+#ifndef CONFIG_MODULE_STRIPPED
- if (mod->srcversion[0]) {
- buf_printf(b, "\n");
- buf_printf(b, "MODULE_INFO(srcversion, \"%s\");\n",
- mod->srcversion);
- }
-+#endif
- }
-
- static void write_if_changed(struct buffer *b, const char *fname)
-@@ -2256,7 +2266,9 @@ int main(int argc, char **argv)
- add_staging_flag(&buf, mod->name);
- err |= add_versions(&buf, mod);
- add_depends(&buf, mod, modules);
-+#ifndef CONFIG_MODULE_STRIPPED
- add_moddevtable(&buf, mod);
-+#endif
- add_srcversion(&buf, mod);
-
- sprintf(fname, "%s.mod.c", mod->name);
+++ /dev/null
---- a/lib/vsprintf.c
-+++ b/lib/vsprintf.c
-@@ -614,8 +614,10 @@ char *symbol_string(char *buf, char *end
- struct printf_spec spec, const char *fmt)
- {
- unsigned long value;
--#ifdef CONFIG_KALLSYMS
- char sym[KSYM_SYMBOL_LEN];
-+#ifndef CONFIG_KALLSYMS
-+ struct module *mod;
-+ int len;
- #endif
-
- if (fmt[1] == 'R')
-@@ -629,15 +631,15 @@ char *symbol_string(char *buf, char *end
- sprint_symbol(sym, value);
- else
- sprint_symbol_no_offset(sym, value);
--
-- return string(buf, end, sym, spec);
- #else
-- spec.field_width = 2 * sizeof(void *);
-- spec.flags |= SPECIAL | SMALL | ZEROPAD;
-- spec.base = 16;
-+ len = snprintf(sym, sizeof(sym), "0x%lx", value);
-
-- return number(buf, end, value, spec);
-+ mod = __module_address(value);
-+ if (mod)
-+ snprintf(sym + len, sizeof(sym) - len, " [%s@%p+0x%x]",
-+ mod->name, mod->module_core, mod->core_size);
- #endif
-+ return string(buf, end, sym, spec);
- }
-
- static noinline_for_stack
+++ /dev/null
---- a/scripts/kallsyms.c
-+++ b/scripts/kallsyms.c
-@@ -22,6 +22,35 @@
- #include <stdlib.h>
- #include <string.h>
- #include <ctype.h>
-+#ifdef __APPLE__
-+/* Darwin has no memmem implementation, this one is ripped of the uClibc-0.9.28 source */
-+void *memmem (const void *haystack, size_t haystack_len,
-+ const void *needle, size_t needle_len)
-+{
-+ const char *begin;
-+ const char *const last_possible
-+ = (const char *) haystack + haystack_len - needle_len;
-+
-+ if (needle_len == 0)
-+ /* The first occurrence of the empty string is deemed to occur at
-+ the beginning of the string. */
-+ return (void *) haystack;
-+
-+ /* Sanity check, otherwise the loop might search through the whole
-+ memory. */
-+ if (__builtin_expect (haystack_len < needle_len, 0))
-+ return NULL;
-+
-+ for (begin = (const char *) haystack; begin <= last_possible; ++begin)
-+ if (begin[0] == ((const char *) needle)[0] &&
-+ !memcmp ((const void *) &begin[1],
-+ (const void *) ((const char *) needle + 1),
-+ needle_len - 1))
-+ return (void *) begin;
-+
-+ return NULL;
-+}
-+#endif
-
- #ifndef ARRAY_SIZE
- #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof(arr[0]))
---- a/scripts/kconfig/Makefile
-+++ b/scripts/kconfig/Makefile
-@@ -151,6 +151,9 @@ check-lxdialog := $(srctree)/$(src)/lxd
- # we really need to do so. (Do not call gcc as part of make mrproper)
- HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \
- -DLOCALE
-+ifeq ($(shell uname -s),Darwin)
-+HOST_LOADLIBES += -lncurses
-+endif
-
- # ===========================================================================
- # Shared Makefile for the various kconfig executables:
---- a/scripts/mod/mk_elfconfig.c
-+++ b/scripts/mod/mk_elfconfig.c
-@@ -1,7 +1,11 @@
- #include <stdio.h>
- #include <stdlib.h>
- #include <string.h>
-+#ifndef __APPLE__
- #include <elf.h>
-+#else
-+#include "elf.h"
-+#endif
-
- int
- main(int argc, char **argv)
---- a/scripts/mod/modpost.h
-+++ b/scripts/mod/modpost.h
-@@ -7,7 +7,11 @@
- #include <sys/mman.h>
- #include <fcntl.h>
- #include <unistd.h>
-+#if !(defined(__APPLE__) || defined(__CYGWIN__))
- #include <elf.h>
-+#else
-+#include "elf.h"
-+#endif
-
- #include "elfconfig.h"
-
---- /dev/null
-+++ b/scripts/mod/elf.h
-@@ -0,0 +1,3007 @@
-+/* This file defines standard ELF types, structures, and macros.
-+ Copyright (C) 1995-2012 Free Software Foundation, Inc.
-+ This file is part of the GNU C Library.
-+
-+ The GNU C Library is free software; you can redistribute it and/or
-+ modify it under the terms of the GNU Lesser General Public
-+ License as published by the Free Software Foundation; either
-+ version 2.1 of the License, or (at your option) any later version.
-+
-+ The GNU C Library is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Lesser General Public License for more details.
-+
-+ You should have received a copy of the GNU Lesser General Public
-+ License along with the GNU C Library; if not, see
-+ <http://www.gnu.org/licenses/>. */
-+
-+#ifndef _ELF_H
-+#define _ELF_H 1
-+
-+/* Standard ELF types. */
-+
-+#include <stdint.h>
-+
-+/* Type for a 16-bit quantity. */
-+typedef uint16_t Elf32_Half;
-+typedef uint16_t Elf64_Half;
-+
-+/* Types for signed and unsigned 32-bit quantities. */
-+typedef uint32_t Elf32_Word;
-+typedef int32_t Elf32_Sword;
-+typedef uint32_t Elf64_Word;
-+typedef int32_t Elf64_Sword;
-+
-+/* Types for signed and unsigned 64-bit quantities. */
-+typedef uint64_t Elf32_Xword;
-+typedef int64_t Elf32_Sxword;
-+typedef uint64_t Elf64_Xword;
-+typedef int64_t Elf64_Sxword;
-+
-+/* Type of addresses. */
-+typedef uint32_t Elf32_Addr;
-+typedef uint64_t Elf64_Addr;
-+
-+/* Type of file offsets. */
-+typedef uint32_t Elf32_Off;
-+typedef uint64_t Elf64_Off;
-+
-+/* Type for section indices, which are 16-bit quantities. */
-+typedef uint16_t Elf32_Section;
-+typedef uint16_t Elf64_Section;
-+
-+/* Type for version symbol information. */
-+typedef Elf32_Half Elf32_Versym;
-+typedef Elf64_Half Elf64_Versym;
-+
-+
-+/* The ELF file header. This appears at the start of every ELF file. */
-+
-+#define EI_NIDENT (16)
-+
-+typedef struct
-+{
-+ unsigned char e_ident[EI_NIDENT]; /* Magic number and other info */
-+ Elf32_Half e_type; /* Object file type */
-+ Elf32_Half e_machine; /* Architecture */
-+ Elf32_Word e_version; /* Object file version */
-+ Elf32_Addr e_entry; /* Entry point virtual address */
-+ Elf32_Off e_phoff; /* Program header table file offset */
-+ Elf32_Off e_shoff; /* Section header table file offset */
-+ Elf32_Word e_flags; /* Processor-specific flags */
-+ Elf32_Half e_ehsize; /* ELF header size in bytes */
-+ Elf32_Half e_phentsize; /* Program header table entry size */
-+ Elf32_Half e_phnum; /* Program header table entry count */
-+ Elf32_Half e_shentsize; /* Section header table entry size */
-+ Elf32_Half e_shnum; /* Section header table entry count */
-+ Elf32_Half e_shstrndx; /* Section header string table index */
-+} Elf32_Ehdr;
-+
-+typedef struct
-+{
-+ unsigned char e_ident[EI_NIDENT]; /* Magic number and other info */
-+ Elf64_Half e_type; /* Object file type */
-+ Elf64_Half e_machine; /* Architecture */
-+ Elf64_Word e_version; /* Object file version */
-+ Elf64_Addr e_entry; /* Entry point virtual address */
-+ Elf64_Off e_phoff; /* Program header table file offset */
-+ Elf64_Off e_shoff; /* Section header table file offset */
-+ Elf64_Word e_flags; /* Processor-specific flags */
-+ Elf64_Half e_ehsize; /* ELF header size in bytes */
-+ Elf64_Half e_phentsize; /* Program header table entry size */
-+ Elf64_Half e_phnum; /* Program header table entry count */
-+ Elf64_Half e_shentsize; /* Section header table entry size */
-+ Elf64_Half e_shnum; /* Section header table entry count */
-+ Elf64_Half e_shstrndx; /* Section header string table index */
-+} Elf64_Ehdr;
-+
-+/* Fields in the e_ident array. The EI_* macros are indices into the
-+ array. The macros under each EI_* macro are the values the byte
-+ may have. */
-+
-+#define EI_MAG0 0 /* File identification byte 0 index */
-+#define ELFMAG0 0x7f /* Magic number byte 0 */
-+
-+#define EI_MAG1 1 /* File identification byte 1 index */
-+#define ELFMAG1 'E' /* Magic number byte 1 */
-+
-+#define EI_MAG2 2 /* File identification byte 2 index */
-+#define ELFMAG2 'L' /* Magic number byte 2 */
-+
-+#define EI_MAG3 3 /* File identification byte 3 index */
-+#define ELFMAG3 'F' /* Magic number byte 3 */
-+
-+/* Conglomeration of the identification bytes, for easy testing as a word. */
-+#define ELFMAG "\177ELF"
-+#define SELFMAG 4
-+
-+#define EI_CLASS 4 /* File class byte index */
-+#define ELFCLASSNONE 0 /* Invalid class */
-+#define ELFCLASS32 1 /* 32-bit objects */
-+#define ELFCLASS64 2 /* 64-bit objects */
-+#define ELFCLASSNUM 3
-+
-+#define EI_DATA 5 /* Data encoding byte index */
-+#define ELFDATANONE 0 /* Invalid data encoding */
-+#define ELFDATA2LSB 1 /* 2's complement, little endian */
-+#define ELFDATA2MSB 2 /* 2's complement, big endian */
-+#define ELFDATANUM 3
-+
-+#define EI_VERSION 6 /* File version byte index */
-+ /* Value must be EV_CURRENT */
-+
-+#define EI_OSABI 7 /* OS ABI identification */
-+#define ELFOSABI_NONE 0 /* UNIX System V ABI */
-+#define ELFOSABI_SYSV 0 /* Alias. */
-+#define ELFOSABI_HPUX 1 /* HP-UX */
-+#define ELFOSABI_NETBSD 2 /* NetBSD. */
-+#define ELFOSABI_GNU 3 /* Object uses GNU ELF extensions. */
-+#define ELFOSABI_LINUX ELFOSABI_GNU /* Compatibility alias. */
-+#define ELFOSABI_SOLARIS 6 /* Sun Solaris. */
-+#define ELFOSABI_AIX 7 /* IBM AIX. */
-+#define ELFOSABI_IRIX 8 /* SGI Irix. */
-+#define ELFOSABI_FREEBSD 9 /* FreeBSD. */
-+#define ELFOSABI_TRU64 10 /* Compaq TRU64 UNIX. */
-+#define ELFOSABI_MODESTO 11 /* Novell Modesto. */
-+#define ELFOSABI_OPENBSD 12 /* OpenBSD. */
-+#define ELFOSABI_ARM_AEABI 64 /* ARM EABI */
-+#define ELFOSABI_ARM 97 /* ARM */
-+#define ELFOSABI_STANDALONE 255 /* Standalone (embedded) application */
-+
-+#define EI_ABIVERSION 8 /* ABI version */
-+
-+#define EI_PAD 9 /* Byte index of padding bytes */
-+
-+/* Legal values for e_type (object file type). */
-+
-+#define ET_NONE 0 /* No file type */
-+#define ET_REL 1 /* Relocatable file */
-+#define ET_EXEC 2 /* Executable file */
-+#define ET_DYN 3 /* Shared object file */
-+#define ET_CORE 4 /* Core file */
-+#define ET_NUM 5 /* Number of defined types */
-+#define ET_LOOS 0xfe00 /* OS-specific range start */
-+#define ET_HIOS 0xfeff /* OS-specific range end */
-+#define ET_LOPROC 0xff00 /* Processor-specific range start */
-+#define ET_HIPROC 0xffff /* Processor-specific range end */
-+
-+/* Legal values for e_machine (architecture). */
-+
-+#define EM_NONE 0 /* No machine */
-+#define EM_M32 1 /* AT&T WE 32100 */
-+#define EM_SPARC 2 /* SUN SPARC */
-+#define EM_386 3 /* Intel 80386 */
-+#define EM_68K 4 /* Motorola m68k family */
-+#define EM_88K 5 /* Motorola m88k family */
-+#define EM_860 7 /* Intel 80860 */
-+#define EM_MIPS 8 /* MIPS R3000 big-endian */
-+#define EM_S370 9 /* IBM System/370 */
-+#define EM_MIPS_RS3_LE 10 /* MIPS R3000 little-endian */
-+
-+#define EM_PARISC 15 /* HPPA */
-+#define EM_VPP500 17 /* Fujitsu VPP500 */
-+#define EM_SPARC32PLUS 18 /* Sun's "v8plus" */
-+#define EM_960 19 /* Intel 80960 */
-+#define EM_PPC 20 /* PowerPC */
-+#define EM_PPC64 21 /* PowerPC 64-bit */
-+#define EM_S390 22 /* IBM S390 */
-+
-+#define EM_V800 36 /* NEC V800 series */
-+#define EM_FR20 37 /* Fujitsu FR20 */
-+#define EM_RH32 38 /* TRW RH-32 */
-+#define EM_RCE 39 /* Motorola RCE */
-+#define EM_ARM 40 /* ARM */
-+#define EM_FAKE_ALPHA 41 /* Digital Alpha */
-+#define EM_SH 42 /* Hitachi SH */
-+#define EM_SPARCV9 43 /* SPARC v9 64-bit */
-+#define EM_TRICORE 44 /* Siemens Tricore */
-+#define EM_ARC 45 /* Argonaut RISC Core */
-+#define EM_H8_300 46 /* Hitachi H8/300 */
-+#define EM_H8_300H 47 /* Hitachi H8/300H */
-+#define EM_H8S 48 /* Hitachi H8S */
-+#define EM_H8_500 49 /* Hitachi H8/500 */
-+#define EM_IA_64 50 /* Intel Merced */
-+#define EM_MIPS_X 51 /* Stanford MIPS-X */
-+#define EM_COLDFIRE 52 /* Motorola Coldfire */
-+#define EM_68HC12 53 /* Motorola M68HC12 */
-+#define EM_MMA 54 /* Fujitsu MMA Multimedia Accelerator*/
-+#define EM_PCP 55 /* Siemens PCP */
-+#define EM_NCPU 56 /* Sony nCPU embeeded RISC */
-+#define EM_NDR1 57 /* Denso NDR1 microprocessor */
-+#define EM_STARCORE 58 /* Motorola Start*Core processor */
-+#define EM_ME16 59 /* Toyota ME16 processor */
-+#define EM_ST100 60 /* STMicroelectronic ST100 processor */
-+#define EM_TINYJ 61 /* Advanced Logic Corp. Tinyj emb.fam*/
-+#define EM_X86_64 62 /* AMD x86-64 architecture */
-+#define EM_PDSP 63 /* Sony DSP Processor */
-+
-+#define EM_FX66 66 /* Siemens FX66 microcontroller */
-+#define EM_ST9PLUS 67 /* STMicroelectronics ST9+ 8/16 mc */
-+#define EM_ST7 68 /* STmicroelectronics ST7 8 bit mc */
-+#define EM_68HC16 69 /* Motorola MC68HC16 microcontroller */
-+#define EM_68HC11 70 /* Motorola MC68HC11 microcontroller */
-+#define EM_68HC08 71 /* Motorola MC68HC08 microcontroller */
-+#define EM_68HC05 72 /* Motorola MC68HC05 microcontroller */
-+#define EM_SVX 73 /* Silicon Graphics SVx */
-+#define EM_ST19 74 /* STMicroelectronics ST19 8 bit mc */
-+#define EM_VAX 75 /* Digital VAX */
-+#define EM_CRIS 76 /* Axis Communications 32-bit embedded processor */
-+#define EM_JAVELIN 77 /* Infineon Technologies 32-bit embedded processor */
-+#define EM_FIREPATH 78 /* Element 14 64-bit DSP Processor */
-+#define EM_ZSP 79 /* LSI Logic 16-bit DSP Processor */
-+#define EM_MMIX 80 /* Donald Knuth's educational 64-bit processor */
-+#define EM_HUANY 81 /* Harvard University machine-independent object files */
-+#define EM_PRISM 82 /* SiTera Prism */
-+#define EM_AVR 83 /* Atmel AVR 8-bit microcontroller */
-+#define EM_FR30 84 /* Fujitsu FR30 */
-+#define EM_D10V 85 /* Mitsubishi D10V */
-+#define EM_D30V 86 /* Mitsubishi D30V */
-+#define EM_V850 87 /* NEC v850 */
-+#define EM_M32R 88 /* Mitsubishi M32R */
-+#define EM_MN10300 89 /* Matsushita MN10300 */
-+#define EM_MN10200 90 /* Matsushita MN10200 */
-+#define EM_PJ 91 /* picoJava */
-+#define EM_OPENRISC 92 /* OpenRISC 32-bit embedded processor */
-+#define EM_ARC_A5 93 /* ARC Cores Tangent-A5 */
-+#define EM_XTENSA 94 /* Tensilica Xtensa Architecture */
-+#define EM_TILEPRO 188 /* Tilera TILEPro */
-+#define EM_TILEGX 191 /* Tilera TILE-Gx */
-+#define EM_NUM 192
-+
-+/* If it is necessary to assign new unofficial EM_* values, please
-+ pick large random numbers (0x8523, 0xa7f2, etc.) to minimize the
-+ chances of collision with official or non-GNU unofficial values. */
-+
-+#define EM_ALPHA 0x9026
-+
-+/* Legal values for e_version (version). */
-+
-+#define EV_NONE 0 /* Invalid ELF version */
-+#define EV_CURRENT 1 /* Current version */
-+#define EV_NUM 2
-+
-+/* Section header. */
-+
-+typedef struct
-+{
-+ Elf32_Word sh_name; /* Section name (string tbl index) */
-+ Elf32_Word sh_type; /* Section type */
-+ Elf32_Word sh_flags; /* Section flags */
-+ Elf32_Addr sh_addr; /* Section virtual addr at execution */
-+ Elf32_Off sh_offset; /* Section file offset */
-+ Elf32_Word sh_size; /* Section size in bytes */
-+ Elf32_Word sh_link; /* Link to another section */
-+ Elf32_Word sh_info; /* Additional section information */
-+ Elf32_Word sh_addralign; /* Section alignment */
-+ Elf32_Word sh_entsize; /* Entry size if section holds table */
-+} Elf32_Shdr;
-+
-+typedef struct
-+{
-+ Elf64_Word sh_name; /* Section name (string tbl index) */
-+ Elf64_Word sh_type; /* Section type */
-+ Elf64_Xword sh_flags; /* Section flags */
-+ Elf64_Addr sh_addr; /* Section virtual addr at execution */
-+ Elf64_Off sh_offset; /* Section file offset */
-+ Elf64_Xword sh_size; /* Section size in bytes */
-+ Elf64_Word sh_link; /* Link to another section */
-+ Elf64_Word sh_info; /* Additional section information */
-+ Elf64_Xword sh_addralign; /* Section alignment */
-+ Elf64_Xword sh_entsize; /* Entry size if section holds table */
-+} Elf64_Shdr;
-+
-+/* Special section indices. */
-+
-+#define SHN_UNDEF 0 /* Undefined section */
-+#define SHN_LORESERVE 0xff00 /* Start of reserved indices */
-+#define SHN_LOPROC 0xff00 /* Start of processor-specific */
-+#define SHN_BEFORE 0xff00 /* Order section before all others
-+ (Solaris). */
-+#define SHN_AFTER 0xff01 /* Order section after all others
-+ (Solaris). */
-+#define SHN_HIPROC 0xff1f /* End of processor-specific */
-+#define SHN_LOOS 0xff20 /* Start of OS-specific */
-+#define SHN_HIOS 0xff3f /* End of OS-specific */
-+#define SHN_ABS 0xfff1 /* Associated symbol is absolute */
-+#define SHN_COMMON 0xfff2 /* Associated symbol is common */
-+#define SHN_XINDEX 0xffff /* Index is in extra table. */
-+#define SHN_HIRESERVE 0xffff /* End of reserved indices */
-+
-+/* Legal values for sh_type (section type). */
-+
-+#define SHT_NULL 0 /* Section header table entry unused */
-+#define SHT_PROGBITS 1 /* Program data */
-+#define SHT_SYMTAB 2 /* Symbol table */
-+#define SHT_STRTAB 3 /* String table */
-+#define SHT_RELA 4 /* Relocation entries with addends */
-+#define SHT_HASH 5 /* Symbol hash table */
-+#define SHT_DYNAMIC 6 /* Dynamic linking information */
-+#define SHT_NOTE 7 /* Notes */
-+#define SHT_NOBITS 8 /* Program space with no data (bss) */
-+#define SHT_REL 9 /* Relocation entries, no addends */
-+#define SHT_SHLIB 10 /* Reserved */
-+#define SHT_DYNSYM 11 /* Dynamic linker symbol table */
-+#define SHT_INIT_ARRAY 14 /* Array of constructors */
-+#define SHT_FINI_ARRAY 15 /* Array of destructors */
-+#define SHT_PREINIT_ARRAY 16 /* Array of pre-constructors */
-+#define SHT_GROUP 17 /* Section group */
-+#define SHT_SYMTAB_SHNDX 18 /* Extended section indeces */
-+#define SHT_NUM 19 /* Number of defined types. */
-+#define SHT_LOOS 0x60000000 /* Start OS-specific. */
-+#define SHT_GNU_ATTRIBUTES 0x6ffffff5 /* Object attributes. */
-+#define SHT_GNU_HASH 0x6ffffff6 /* GNU-style hash table. */
-+#define SHT_GNU_LIBLIST 0x6ffffff7 /* Prelink library list */
-+#define SHT_CHECKSUM 0x6ffffff8 /* Checksum for DSO content. */
-+#define SHT_LOSUNW 0x6ffffffa /* Sun-specific low bound. */
-+#define SHT_SUNW_move 0x6ffffffa
-+#define SHT_SUNW_COMDAT 0x6ffffffb
-+#define SHT_SUNW_syminfo 0x6ffffffc
-+#define SHT_GNU_verdef 0x6ffffffd /* Version definition section. */
-+#define SHT_GNU_verneed 0x6ffffffe /* Version needs section. */
-+#define SHT_GNU_versym 0x6fffffff /* Version symbol table. */
-+#define SHT_HISUNW 0x6fffffff /* Sun-specific high bound. */
-+#define SHT_HIOS 0x6fffffff /* End OS-specific type */
-+#define SHT_LOPROC 0x70000000 /* Start of processor-specific */
-+#define SHT_HIPROC 0x7fffffff /* End of processor-specific */
-+#define SHT_LOUSER 0x80000000 /* Start of application-specific */
-+#define SHT_HIUSER 0x8fffffff /* End of application-specific */
-+
-+/* Legal values for sh_flags (section flags). */
-+
-+#define SHF_WRITE (1 << 0) /* Writable */
-+#define SHF_ALLOC (1 << 1) /* Occupies memory during execution */
-+#define SHF_EXECINSTR (1 << 2) /* Executable */
-+#define SHF_MERGE (1 << 4) /* Might be merged */
-+#define SHF_STRINGS (1 << 5) /* Contains nul-terminated strings */
-+#define SHF_INFO_LINK (1 << 6) /* `sh_info' contains SHT index */
-+#define SHF_LINK_ORDER (1 << 7) /* Preserve order after combining */
-+#define SHF_OS_NONCONFORMING (1 << 8) /* Non-standard OS specific handling
-+ required */
-+#define SHF_GROUP (1 << 9) /* Section is member of a group. */
-+#define SHF_TLS (1 << 10) /* Section hold thread-local data. */
-+#define SHF_MASKOS 0x0ff00000 /* OS-specific. */
-+#define SHF_MASKPROC 0xf0000000 /* Processor-specific */
-+#define SHF_ORDERED (1 << 30) /* Special ordering requirement
-+ (Solaris). */
-+#define SHF_EXCLUDE (1 << 31) /* Section is excluded unless
-+ referenced or allocated (Solaris).*/
-+
-+/* Section group handling. */
-+#define GRP_COMDAT 0x1 /* Mark group as COMDAT. */
-+
-+/* Symbol table entry. */
-+
-+typedef struct
-+{
-+ Elf32_Word st_name; /* Symbol name (string tbl index) */
-+ Elf32_Addr st_value; /* Symbol value */
-+ Elf32_Word st_size; /* Symbol size */
-+ unsigned char st_info; /* Symbol type and binding */
-+ unsigned char st_other; /* Symbol visibility */
-+ Elf32_Section st_shndx; /* Section index */
-+} Elf32_Sym;
-+
-+typedef struct
-+{
-+ Elf64_Word st_name; /* Symbol name (string tbl index) */
-+ unsigned char st_info; /* Symbol type and binding */
-+ unsigned char st_other; /* Symbol visibility */
-+ Elf64_Section st_shndx; /* Section index */
-+ Elf64_Addr st_value; /* Symbol value */
-+ Elf64_Xword st_size; /* Symbol size */
-+} Elf64_Sym;
-+
-+/* The syminfo section if available contains additional information about
-+ every dynamic symbol. */
-+
-+typedef struct
-+{
-+ Elf32_Half si_boundto; /* Direct bindings, symbol bound to */
-+ Elf32_Half si_flags; /* Per symbol flags */
-+} Elf32_Syminfo;
-+
-+typedef struct
-+{
-+ Elf64_Half si_boundto; /* Direct bindings, symbol bound to */
-+ Elf64_Half si_flags; /* Per symbol flags */
-+} Elf64_Syminfo;
-+
-+/* Possible values for si_boundto. */
-+#define SYMINFO_BT_SELF 0xffff /* Symbol bound to self */
-+#define SYMINFO_BT_PARENT 0xfffe /* Symbol bound to parent */
-+#define SYMINFO_BT_LOWRESERVE 0xff00 /* Beginning of reserved entries */
-+
-+/* Possible bitmasks for si_flags. */
-+#define SYMINFO_FLG_DIRECT 0x0001 /* Direct bound symbol */
-+#define SYMINFO_FLG_PASSTHRU 0x0002 /* Pass-thru symbol for translator */
-+#define SYMINFO_FLG_COPY 0x0004 /* Symbol is a copy-reloc */
-+#define SYMINFO_FLG_LAZYLOAD 0x0008 /* Symbol bound to object to be lazy
-+ loaded */
-+/* Syminfo version values. */
-+#define SYMINFO_NONE 0
-+#define SYMINFO_CURRENT 1
-+#define SYMINFO_NUM 2
-+
-+
-+/* How to extract and insert information held in the st_info field. */
-+
-+#define ELF32_ST_BIND(val) (((unsigned char) (val)) >> 4)
-+#define ELF32_ST_TYPE(val) ((val) & 0xf)
-+#define ELF32_ST_INFO(bind, type) (((bind) << 4) + ((type) & 0xf))
-+
-+/* Both Elf32_Sym and Elf64_Sym use the same one-byte st_info field. */
-+#define ELF64_ST_BIND(val) ELF32_ST_BIND (val)
-+#define ELF64_ST_TYPE(val) ELF32_ST_TYPE (val)
-+#define ELF64_ST_INFO(bind, type) ELF32_ST_INFO ((bind), (type))
-+
-+/* Legal values for ST_BIND subfield of st_info (symbol binding). */
-+
-+#define STB_LOCAL 0 /* Local symbol */
-+#define STB_GLOBAL 1 /* Global symbol */
-+#define STB_WEAK 2 /* Weak symbol */
-+#define STB_NUM 3 /* Number of defined types. */
-+#define STB_LOOS 10 /* Start of OS-specific */
-+#define STB_GNU_UNIQUE 10 /* Unique symbol. */
-+#define STB_HIOS 12 /* End of OS-specific */
-+#define STB_LOPROC 13 /* Start of processor-specific */
-+#define STB_HIPROC 15 /* End of processor-specific */
-+
-+/* Legal values for ST_TYPE subfield of st_info (symbol type). */
-+
-+#define STT_NOTYPE 0 /* Symbol type is unspecified */
-+#define STT_OBJECT 1 /* Symbol is a data object */
-+#define STT_FUNC 2 /* Symbol is a code object */
-+#define STT_SECTION 3 /* Symbol associated with a section */
-+#define STT_FILE 4 /* Symbol's name is file name */
-+#define STT_COMMON 5 /* Symbol is a common data object */
-+#define STT_TLS 6 /* Symbol is thread-local data object*/
-+#define STT_NUM 7 /* Number of defined types. */
-+#define STT_LOOS 10 /* Start of OS-specific */
-+#define STT_GNU_IFUNC 10 /* Symbol is indirect code object */
-+#define STT_HIOS 12 /* End of OS-specific */
-+#define STT_LOPROC 13 /* Start of processor-specific */
-+#define STT_HIPROC 15 /* End of processor-specific */
-+
-+
-+/* Symbol table indices are found in the hash buckets and chain table
-+ of a symbol hash table section. This special index value indicates
-+ the end of a chain, meaning no further symbols are found in that bucket. */
-+
-+#define STN_UNDEF 0 /* End of a chain. */
-+
-+
-+/* How to extract and insert information held in the st_other field. */
-+
-+#define ELF32_ST_VISIBILITY(o) ((o) & 0x03)
-+
-+/* For ELF64 the definitions are the same. */
-+#define ELF64_ST_VISIBILITY(o) ELF32_ST_VISIBILITY (o)
-+
-+/* Symbol visibility specification encoded in the st_other field. */
-+#define STV_DEFAULT 0 /* Default symbol visibility rules */
-+#define STV_INTERNAL 1 /* Processor specific hidden class */
-+#define STV_HIDDEN 2 /* Sym unavailable in other modules */
-+#define STV_PROTECTED 3 /* Not preemptible, not exported */
-+
-+
-+/* Relocation table entry without addend (in section of type SHT_REL). */
-+
-+typedef struct
-+{
-+ Elf32_Addr r_offset; /* Address */
-+ Elf32_Word r_info; /* Relocation type and symbol index */
-+} Elf32_Rel;
-+
-+/* I have seen two different definitions of the Elf64_Rel and
-+ Elf64_Rela structures, so we'll leave them out until Novell (or
-+ whoever) gets their act together. */
-+/* The following, at least, is used on Sparc v9, MIPS, and Alpha. */
-+
-+typedef struct
-+{
-+ Elf64_Addr r_offset; /* Address */
-+ Elf64_Xword r_info; /* Relocation type and symbol index */
-+} Elf64_Rel;
-+
-+/* Relocation table entry with addend (in section of type SHT_RELA). */
-+
-+typedef struct
-+{
-+ Elf32_Addr r_offset; /* Address */
-+ Elf32_Word r_info; /* Relocation type and symbol index */
-+ Elf32_Sword r_addend; /* Addend */
-+} Elf32_Rela;
-+
-+typedef struct
-+{
-+ Elf64_Addr r_offset; /* Address */
-+ Elf64_Xword r_info; /* Relocation type and symbol index */
-+ Elf64_Sxword r_addend; /* Addend */
-+} Elf64_Rela;
-+
-+/* How to extract and insert information held in the r_info field. */
-+
-+#define ELF32_R_SYM(val) ((val) >> 8)
-+#define ELF32_R_TYPE(val) ((val) & 0xff)
-+#define ELF32_R_INFO(sym, type) (((sym) << 8) + ((type) & 0xff))
-+
-+#define ELF64_R_SYM(i) ((i) >> 32)
-+#define ELF64_R_TYPE(i) ((i) & 0xffffffff)
-+#define ELF64_R_INFO(sym,type) ((((Elf64_Xword) (sym)) << 32) + (type))
-+
-+/* Program segment header. */
-+
-+typedef struct
-+{
-+ Elf32_Word p_type; /* Segment type */
-+ Elf32_Off p_offset; /* Segment file offset */
-+ Elf32_Addr p_vaddr; /* Segment virtual address */
-+ Elf32_Addr p_paddr; /* Segment physical address */
-+ Elf32_Word p_filesz; /* Segment size in file */
-+ Elf32_Word p_memsz; /* Segment size in memory */
-+ Elf32_Word p_flags; /* Segment flags */
-+ Elf32_Word p_align; /* Segment alignment */
-+} Elf32_Phdr;
-+
-+typedef struct
-+{
-+ Elf64_Word p_type; /* Segment type */
-+ Elf64_Word p_flags; /* Segment flags */
-+ Elf64_Off p_offset; /* Segment file offset */
-+ Elf64_Addr p_vaddr; /* Segment virtual address */
-+ Elf64_Addr p_paddr; /* Segment physical address */
-+ Elf64_Xword p_filesz; /* Segment size in file */
-+ Elf64_Xword p_memsz; /* Segment size in memory */
-+ Elf64_Xword p_align; /* Segment alignment */
-+} Elf64_Phdr;
-+
-+/* Special value for e_phnum. This indicates that the real number of
-+ program headers is too large to fit into e_phnum. Instead the real
-+ value is in the field sh_info of section 0. */
-+
-+#define PN_XNUM 0xffff
-+
-+/* Legal values for p_type (segment type). */
-+
-+#define PT_NULL 0 /* Program header table entry unused */
-+#define PT_LOAD 1 /* Loadable program segment */
-+#define PT_DYNAMIC 2 /* Dynamic linking information */
-+#define PT_INTERP 3 /* Program interpreter */
-+#define PT_NOTE 4 /* Auxiliary information */
-+#define PT_SHLIB 5 /* Reserved */
-+#define PT_PHDR 6 /* Entry for header table itself */
-+#define PT_TLS 7 /* Thread-local storage segment */
-+#define PT_NUM 8 /* Number of defined types */
-+#define PT_LOOS 0x60000000 /* Start of OS-specific */
-+#define PT_GNU_EH_FRAME 0x6474e550 /* GCC .eh_frame_hdr segment */
-+#define PT_GNU_STACK 0x6474e551 /* Indicates stack executability */
-+#define PT_GNU_RELRO 0x6474e552 /* Read-only after relocation */
-+#define PT_LOSUNW 0x6ffffffa
-+#define PT_SUNWBSS 0x6ffffffa /* Sun Specific segment */
-+#define PT_SUNWSTACK 0x6ffffffb /* Stack segment */
-+#define PT_HISUNW 0x6fffffff
-+#define PT_HIOS 0x6fffffff /* End of OS-specific */
-+#define PT_LOPROC 0x70000000 /* Start of processor-specific */
-+#define PT_HIPROC 0x7fffffff /* End of processor-specific */
-+
-+/* Legal values for p_flags (segment flags). */
-+
-+#define PF_X (1 << 0) /* Segment is executable */
-+#define PF_W (1 << 1) /* Segment is writable */
-+#define PF_R (1 << 2) /* Segment is readable */
-+#define PF_MASKOS 0x0ff00000 /* OS-specific */
-+#define PF_MASKPROC 0xf0000000 /* Processor-specific */
-+
-+/* Legal values for note segment descriptor types for core files. */
-+
-+#define NT_PRSTATUS 1 /* Contains copy of prstatus struct */
-+#define NT_FPREGSET 2 /* Contains copy of fpregset struct */
-+#define NT_PRPSINFO 3 /* Contains copy of prpsinfo struct */
-+#define NT_PRXREG 4 /* Contains copy of prxregset struct */
-+#define NT_TASKSTRUCT 4 /* Contains copy of task structure */
-+#define NT_PLATFORM 5 /* String from sysinfo(SI_PLATFORM) */
-+#define NT_AUXV 6 /* Contains copy of auxv array */
-+#define NT_GWINDOWS 7 /* Contains copy of gwindows struct */
-+#define NT_ASRS 8 /* Contains copy of asrset struct */
-+#define NT_PSTATUS 10 /* Contains copy of pstatus struct */
-+#define NT_PSINFO 13 /* Contains copy of psinfo struct */
-+#define NT_PRCRED 14 /* Contains copy of prcred struct */
-+#define NT_UTSNAME 15 /* Contains copy of utsname struct */
-+#define NT_LWPSTATUS 16 /* Contains copy of lwpstatus struct */
-+#define NT_LWPSINFO 17 /* Contains copy of lwpinfo struct */
-+#define NT_PRFPXREG 20 /* Contains copy of fprxregset struct */
-+#define NT_PRXFPREG 0x46e62b7f /* Contains copy of user_fxsr_struct */
-+#define NT_PPC_VMX 0x100 /* PowerPC Altivec/VMX registers */
-+#define NT_PPC_SPE 0x101 /* PowerPC SPE/EVR registers */
-+#define NT_PPC_VSX 0x102 /* PowerPC VSX registers */
-+#define NT_386_TLS 0x200 /* i386 TLS slots (struct user_desc) */
-+#define NT_386_IOPERM 0x201 /* x86 io permission bitmap (1=deny) */
-+#define NT_X86_XSTATE 0x202 /* x86 extended state using xsave */
-+
-+/* Legal values for the note segment descriptor types for object files. */
-+
-+#define NT_VERSION 1 /* Contains a version string. */
-+
-+
-+/* Dynamic section entry. */
-+
-+typedef struct
-+{
-+ Elf32_Sword d_tag; /* Dynamic entry type */
-+ union
-+ {
-+ Elf32_Word d_val; /* Integer value */
-+ Elf32_Addr d_ptr; /* Address value */
-+ } d_un;
-+} Elf32_Dyn;
-+
-+typedef struct
-+{
-+ Elf64_Sxword d_tag; /* Dynamic entry type */
-+ union
-+ {
-+ Elf64_Xword d_val; /* Integer value */
-+ Elf64_Addr d_ptr; /* Address value */
-+ } d_un;
-+} Elf64_Dyn;
-+
-+/* Legal values for d_tag (dynamic entry type). */
-+
-+#define DT_NULL 0 /* Marks end of dynamic section */
-+#define DT_NEEDED 1 /* Name of needed library */
-+#define DT_PLTRELSZ 2 /* Size in bytes of PLT relocs */
-+#define DT_PLTGOT 3 /* Processor defined value */
-+#define DT_HASH 4 /* Address of symbol hash table */
-+#define DT_STRTAB 5 /* Address of string table */
-+#define DT_SYMTAB 6 /* Address of symbol table */
-+#define DT_RELA 7 /* Address of Rela relocs */
-+#define DT_RELASZ 8 /* Total size of Rela relocs */
-+#define DT_RELAENT 9 /* Size of one Rela reloc */
-+#define DT_STRSZ 10 /* Size of string table */
-+#define DT_SYMENT 11 /* Size of one symbol table entry */
-+#define DT_INIT 12 /* Address of init function */
-+#define DT_FINI 13 /* Address of termination function */
-+#define DT_SONAME 14 /* Name of shared object */
-+#define DT_RPATH 15 /* Library search path (deprecated) */
-+#define DT_SYMBOLIC 16 /* Start symbol search here */
-+#define DT_REL 17 /* Address of Rel relocs */
-+#define DT_RELSZ 18 /* Total size of Rel relocs */
-+#define DT_RELENT 19 /* Size of one Rel reloc */
-+#define DT_PLTREL 20 /* Type of reloc in PLT */
-+#define DT_DEBUG 21 /* For debugging; unspecified */
-+#define DT_TEXTREL 22 /* Reloc might modify .text */
-+#define DT_JMPREL 23 /* Address of PLT relocs */
-+#define DT_BIND_NOW 24 /* Process relocations of object */
-+#define DT_INIT_ARRAY 25 /* Array with addresses of init fct */
-+#define DT_FINI_ARRAY 26 /* Array with addresses of fini fct */
-+#define DT_INIT_ARRAYSZ 27 /* Size in bytes of DT_INIT_ARRAY */
-+#define DT_FINI_ARRAYSZ 28 /* Size in bytes of DT_FINI_ARRAY */
-+#define DT_RUNPATH 29 /* Library search path */
-+#define DT_FLAGS 30 /* Flags for the object being loaded */
-+#define DT_ENCODING 32 /* Start of encoded range */
-+#define DT_PREINIT_ARRAY 32 /* Array with addresses of preinit fct*/
-+#define DT_PREINIT_ARRAYSZ 33 /* size in bytes of DT_PREINIT_ARRAY */
-+#define DT_NUM 34 /* Number used */
-+#define DT_LOOS 0x6000000d /* Start of OS-specific */
-+#define DT_HIOS 0x6ffff000 /* End of OS-specific */
-+#define DT_LOPROC 0x70000000 /* Start of processor-specific */
-+#define DT_HIPROC 0x7fffffff /* End of processor-specific */
-+#define DT_PROCNUM DT_MIPS_NUM /* Most used by any processor */
-+
-+/* DT_* entries which fall between DT_VALRNGHI & DT_VALRNGLO use the
-+ Dyn.d_un.d_val field of the Elf*_Dyn structure. This follows Sun's
-+ approach. */
-+#define DT_VALRNGLO 0x6ffffd00
-+#define DT_GNU_PRELINKED 0x6ffffdf5 /* Prelinking timestamp */
-+#define DT_GNU_CONFLICTSZ 0x6ffffdf6 /* Size of conflict section */
-+#define DT_GNU_LIBLISTSZ 0x6ffffdf7 /* Size of library list */
-+#define DT_CHECKSUM 0x6ffffdf8
-+#define DT_PLTPADSZ 0x6ffffdf9
-+#define DT_MOVEENT 0x6ffffdfa
-+#define DT_MOVESZ 0x6ffffdfb
-+#define DT_FEATURE_1 0x6ffffdfc /* Feature selection (DTF_*). */
-+#define DT_POSFLAG_1 0x6ffffdfd /* Flags for DT_* entries, effecting
-+ the following DT_* entry. */
-+#define DT_SYMINSZ 0x6ffffdfe /* Size of syminfo table (in bytes) */
-+#define DT_SYMINENT 0x6ffffdff /* Entry size of syminfo */
-+#define DT_VALRNGHI 0x6ffffdff
-+#define DT_VALTAGIDX(tag) (DT_VALRNGHI - (tag)) /* Reverse order! */
-+#define DT_VALNUM 12
-+
-+/* DT_* entries which fall between DT_ADDRRNGHI & DT_ADDRRNGLO use the
-+ Dyn.d_un.d_ptr field of the Elf*_Dyn structure.
-+
-+ If any adjustment is made to the ELF object after it has been
-+ built these entries will need to be adjusted. */
-+#define DT_ADDRRNGLO 0x6ffffe00
-+#define DT_GNU_HASH 0x6ffffef5 /* GNU-style hash table. */
-+#define DT_TLSDESC_PLT 0x6ffffef6
-+#define DT_TLSDESC_GOT 0x6ffffef7
-+#define DT_GNU_CONFLICT 0x6ffffef8 /* Start of conflict section */
-+#define DT_GNU_LIBLIST 0x6ffffef9 /* Library list */
-+#define DT_CONFIG 0x6ffffefa /* Configuration information. */
-+#define DT_DEPAUDIT 0x6ffffefb /* Dependency auditing. */
-+#define DT_AUDIT 0x6ffffefc /* Object auditing. */
-+#define DT_PLTPAD 0x6ffffefd /* PLT padding. */
-+#define DT_MOVETAB 0x6ffffefe /* Move table. */
-+#define DT_SYMINFO 0x6ffffeff /* Syminfo table. */
-+#define DT_ADDRRNGHI 0x6ffffeff
-+#define DT_ADDRTAGIDX(tag) (DT_ADDRRNGHI - (tag)) /* Reverse order! */
-+#define DT_ADDRNUM 11
-+
-+/* The versioning entry types. The next are defined as part of the
-+ GNU extension. */
-+#define DT_VERSYM 0x6ffffff0
-+
-+#define DT_RELACOUNT 0x6ffffff9
-+#define DT_RELCOUNT 0x6ffffffa
-+
-+/* These were chosen by Sun. */
-+#define DT_FLAGS_1 0x6ffffffb /* State flags, see DF_1_* below. */
-+#define DT_VERDEF 0x6ffffffc /* Address of version definition
-+ table */
-+#define DT_VERDEFNUM 0x6ffffffd /* Number of version definitions */
-+#define DT_VERNEED 0x6ffffffe /* Address of table with needed
-+ versions */
-+#define DT_VERNEEDNUM 0x6fffffff /* Number of needed versions */
-+#define DT_VERSIONTAGIDX(tag) (DT_VERNEEDNUM - (tag)) /* Reverse order! */
-+#define DT_VERSIONTAGNUM 16
-+
-+/* Sun added these machine-independent extensions in the "processor-specific"
-+ range. Be compatible. */
-+#define DT_AUXILIARY 0x7ffffffd /* Shared object to load before self */
-+#define DT_FILTER 0x7fffffff /* Shared object to get values from */
-+#define DT_EXTRATAGIDX(tag) ((Elf32_Word)-((Elf32_Sword) (tag) <<1>>1)-1)
-+#define DT_EXTRANUM 3
-+
-+/* Values of `d_un.d_val' in the DT_FLAGS entry. */
-+#define DF_ORIGIN 0x00000001 /* Object may use DF_ORIGIN */
-+#define DF_SYMBOLIC 0x00000002 /* Symbol resolutions starts here */
-+#define DF_TEXTREL 0x00000004 /* Object contains text relocations */
-+#define DF_BIND_NOW 0x00000008 /* No lazy binding for this object */
-+#define DF_STATIC_TLS 0x00000010 /* Module uses the static TLS model */
-+
-+/* State flags selectable in the `d_un.d_val' element of the DT_FLAGS_1
-+ entry in the dynamic section. */
-+#define DF_1_NOW 0x00000001 /* Set RTLD_NOW for this object. */
-+#define DF_1_GLOBAL 0x00000002 /* Set RTLD_GLOBAL for this object. */
-+#define DF_1_GROUP 0x00000004 /* Set RTLD_GROUP for this object. */
-+#define DF_1_NODELETE 0x00000008 /* Set RTLD_NODELETE for this object.*/
-+#define DF_1_LOADFLTR 0x00000010 /* Trigger filtee loading at runtime.*/
-+#define DF_1_INITFIRST 0x00000020 /* Set RTLD_INITFIRST for this object*/
-+#define DF_1_NOOPEN 0x00000040 /* Set RTLD_NOOPEN for this object. */
-+#define DF_1_ORIGIN 0x00000080 /* $ORIGIN must be handled. */
-+#define DF_1_DIRECT 0x00000100 /* Direct binding enabled. */
-+#define DF_1_TRANS 0x00000200
-+#define DF_1_INTERPOSE 0x00000400 /* Object is used to interpose. */
-+#define DF_1_NODEFLIB 0x00000800 /* Ignore default lib search path. */
-+#define DF_1_NODUMP 0x00001000 /* Object can't be dldump'ed. */
-+#define DF_1_CONFALT 0x00002000 /* Configuration alternative created.*/
-+#define DF_1_ENDFILTEE 0x00004000 /* Filtee terminates filters search. */
-+#define DF_1_DISPRELDNE 0x00008000 /* Disp reloc applied at build time. */
-+#define DF_1_DISPRELPND 0x00010000 /* Disp reloc applied at run-time. */
-+
-+/* Flags for the feature selection in DT_FEATURE_1. */
-+#define DTF_1_PARINIT 0x00000001
-+#define DTF_1_CONFEXP 0x00000002
-+
-+/* Flags in the DT_POSFLAG_1 entry effecting only the next DT_* entry. */
-+#define DF_P1_LAZYLOAD 0x00000001 /* Lazyload following object. */
-+#define DF_P1_GROUPPERM 0x00000002 /* Symbols from next object are not
-+ generally available. */
-+
-+/* Version definition sections. */
-+
-+typedef struct
-+{
-+ Elf32_Half vd_version; /* Version revision */
-+ Elf32_Half vd_flags; /* Version information */
-+ Elf32_Half vd_ndx; /* Version Index */
-+ Elf32_Half vd_cnt; /* Number of associated aux entries */
-+ Elf32_Word vd_hash; /* Version name hash value */
-+ Elf32_Word vd_aux; /* Offset in bytes to verdaux array */
-+ Elf32_Word vd_next; /* Offset in bytes to next verdef
-+ entry */
-+} Elf32_Verdef;
-+
-+typedef struct
-+{
-+ Elf64_Half vd_version; /* Version revision */
-+ Elf64_Half vd_flags; /* Version information */
-+ Elf64_Half vd_ndx; /* Version Index */
-+ Elf64_Half vd_cnt; /* Number of associated aux entries */
-+ Elf64_Word vd_hash; /* Version name hash value */
-+ Elf64_Word vd_aux; /* Offset in bytes to verdaux array */
-+ Elf64_Word vd_next; /* Offset in bytes to next verdef
-+ entry */
-+} Elf64_Verdef;
-+
-+
-+/* Legal values for vd_version (version revision). */
-+#define VER_DEF_NONE 0 /* No version */
-+#define VER_DEF_CURRENT 1 /* Current version */
-+#define VER_DEF_NUM 2 /* Given version number */
-+
-+/* Legal values for vd_flags (version information flags). */
-+#define VER_FLG_BASE 0x1 /* Version definition of file itself */
-+#define VER_FLG_WEAK 0x2 /* Weak version identifier */
-+
-+/* Versym symbol index values. */
-+#define VER_NDX_LOCAL 0 /* Symbol is local. */
-+#define VER_NDX_GLOBAL 1 /* Symbol is global. */
-+#define VER_NDX_LORESERVE 0xff00 /* Beginning of reserved entries. */
-+#define VER_NDX_ELIMINATE 0xff01 /* Symbol is to be eliminated. */
-+
-+/* Auxialiary version information. */
-+
-+typedef struct
-+{
-+ Elf32_Word vda_name; /* Version or dependency names */
-+ Elf32_Word vda_next; /* Offset in bytes to next verdaux
-+ entry */
-+} Elf32_Verdaux;
-+
-+typedef struct
-+{
-+ Elf64_Word vda_name; /* Version or dependency names */
-+ Elf64_Word vda_next; /* Offset in bytes to next verdaux
-+ entry */
-+} Elf64_Verdaux;
-+
-+
-+/* Version dependency section. */
-+
-+typedef struct
-+{
-+ Elf32_Half vn_version; /* Version of structure */
-+ Elf32_Half vn_cnt; /* Number of associated aux entries */
-+ Elf32_Word vn_file; /* Offset of filename for this
-+ dependency */
-+ Elf32_Word vn_aux; /* Offset in bytes to vernaux array */
-+ Elf32_Word vn_next; /* Offset in bytes to next verneed
-+ entry */
-+} Elf32_Verneed;
-+
-+typedef struct
-+{
-+ Elf64_Half vn_version; /* Version of structure */
-+ Elf64_Half vn_cnt; /* Number of associated aux entries */
-+ Elf64_Word vn_file; /* Offset of filename for this
-+ dependency */
-+ Elf64_Word vn_aux; /* Offset in bytes to vernaux array */
-+ Elf64_Word vn_next; /* Offset in bytes to next verneed
-+ entry */
-+} Elf64_Verneed;
-+
-+
-+/* Legal values for vn_version (version revision). */
-+#define VER_NEED_NONE 0 /* No version */
-+#define VER_NEED_CURRENT 1 /* Current version */
-+#define VER_NEED_NUM 2 /* Given version number */
-+
-+/* Auxiliary needed version information. */
-+
-+typedef struct
-+{
-+ Elf32_Word vna_hash; /* Hash value of dependency name */
-+ Elf32_Half vna_flags; /* Dependency specific information */
-+ Elf32_Half vna_other; /* Unused */
-+ Elf32_Word vna_name; /* Dependency name string offset */
-+ Elf32_Word vna_next; /* Offset in bytes to next vernaux
-+ entry */
-+} Elf32_Vernaux;
-+
-+typedef struct
-+{
-+ Elf64_Word vna_hash; /* Hash value of dependency name */
-+ Elf64_Half vna_flags; /* Dependency specific information */
-+ Elf64_Half vna_other; /* Unused */
-+ Elf64_Word vna_name; /* Dependency name string offset */
-+ Elf64_Word vna_next; /* Offset in bytes to next vernaux
-+ entry */
-+} Elf64_Vernaux;
-+
-+
-+/* Legal values for vna_flags. */
-+#define VER_FLG_WEAK 0x2 /* Weak version identifier */
-+
-+
-+/* Auxiliary vector. */
-+
-+/* This vector is normally only used by the program interpreter. The
-+ usual definition in an ABI supplement uses the name auxv_t. The
-+ vector is not usually defined in a standard <elf.h> file, but it
-+ can't hurt. We rename it to avoid conflicts. The sizes of these
-+ types are an arrangement between the exec server and the program
-+ interpreter, so we don't fully specify them here. */
-+
-+typedef struct
-+{
-+ uint32_t a_type; /* Entry type */
-+ union
-+ {
-+ uint32_t a_val; /* Integer value */
-+ /* We use to have pointer elements added here. We cannot do that,
-+ though, since it does not work when using 32-bit definitions
-+ on 64-bit platforms and vice versa. */
-+ } a_un;
-+} Elf32_auxv_t;
-+
-+typedef struct
-+{
-+ uint64_t a_type; /* Entry type */
-+ union
-+ {
-+ uint64_t a_val; /* Integer value */
-+ /* We use to have pointer elements added here. We cannot do that,
-+ though, since it does not work when using 32-bit definitions
-+ on 64-bit platforms and vice versa. */
-+ } a_un;
-+} Elf64_auxv_t;
-+
-+/* Legal values for a_type (entry type). */
-+
-+#define AT_NULL 0 /* End of vector */
-+#define AT_IGNORE 1 /* Entry should be ignored */
-+#define AT_EXECFD 2 /* File descriptor of program */
-+#define AT_PHDR 3 /* Program headers for program */
-+#define AT_PHENT 4 /* Size of program header entry */
-+#define AT_PHNUM 5 /* Number of program headers */
-+#define AT_PAGESZ 6 /* System page size */
-+#define AT_BASE 7 /* Base address of interpreter */
-+#define AT_FLAGS 8 /* Flags */
-+#define AT_ENTRY 9 /* Entry point of program */
-+#define AT_NOTELF 10 /* Program is not ELF */
-+#define AT_UID 11 /* Real uid */
-+#define AT_EUID 12 /* Effective uid */
-+#define AT_GID 13 /* Real gid */
-+#define AT_EGID 14 /* Effective gid */
-+#define AT_CLKTCK 17 /* Frequency of times() */
-+
-+/* Some more special a_type values describing the hardware. */
-+#define AT_PLATFORM 15 /* String identifying platform. */
-+#define AT_HWCAP 16 /* Machine dependent hints about
-+ processor capabilities. */
-+
-+/* This entry gives some information about the FPU initialization
-+ performed by the kernel. */
-+#define AT_FPUCW 18 /* Used FPU control word. */
-+
-+/* Cache block sizes. */
-+#define AT_DCACHEBSIZE 19 /* Data cache block size. */
-+#define AT_ICACHEBSIZE 20 /* Instruction cache block size. */
-+#define AT_UCACHEBSIZE 21 /* Unified cache block size. */
-+
-+/* A special ignored value for PPC, used by the kernel to control the
-+ interpretation of the AUXV. Must be > 16. */
-+#define AT_IGNOREPPC 22 /* Entry should be ignored. */
-+
-+#define AT_SECURE 23 /* Boolean, was exec setuid-like? */
-+
-+#define AT_BASE_PLATFORM 24 /* String identifying real platforms.*/
-+
-+#define AT_RANDOM 25 /* Address of 16 random bytes. */
-+
-+#define AT_EXECFN 31 /* Filename of executable. */
-+
-+/* Pointer to the global system page used for system calls and other
-+ nice things. */
-+#define AT_SYSINFO 32
-+#define AT_SYSINFO_EHDR 33
-+
-+/* Shapes of the caches. Bits 0-3 contains associativity; bits 4-7 contains
-+ log2 of line size; mask those to get cache size. */
-+#define AT_L1I_CACHESHAPE 34
-+#define AT_L1D_CACHESHAPE 35
-+#define AT_L2_CACHESHAPE 36
-+#define AT_L3_CACHESHAPE 37
-+
-+/* Note section contents. Each entry in the note section begins with
-+ a header of a fixed form. */
-+
-+typedef struct
-+{
-+ Elf32_Word n_namesz; /* Length of the note's name. */
-+ Elf32_Word n_descsz; /* Length of the note's descriptor. */
-+ Elf32_Word n_type; /* Type of the note. */
-+} Elf32_Nhdr;
-+
-+typedef struct
-+{
-+ Elf64_Word n_namesz; /* Length of the note's name. */
-+ Elf64_Word n_descsz; /* Length of the note's descriptor. */
-+ Elf64_Word n_type; /* Type of the note. */
-+} Elf64_Nhdr;
-+
-+/* Known names of notes. */
-+
-+/* Solaris entries in the note section have this name. */
-+#define ELF_NOTE_SOLARIS "SUNW Solaris"
-+
-+/* Note entries for GNU systems have this name. */
-+#define ELF_NOTE_GNU "GNU"
-+
-+
-+/* Defined types of notes for Solaris. */
-+
-+/* Value of descriptor (one word) is desired pagesize for the binary. */
-+#define ELF_NOTE_PAGESIZE_HINT 1
-+
-+
-+/* Defined note types for GNU systems. */
-+
-+/* ABI information. The descriptor consists of words:
-+ word 0: OS descriptor
-+ word 1: major version of the ABI
-+ word 2: minor version of the ABI
-+ word 3: subminor version of the ABI
-+*/
-+#define NT_GNU_ABI_TAG 1
-+#define ELF_NOTE_ABI NT_GNU_ABI_TAG /* Old name. */
-+
-+/* Known OSes. These values can appear in word 0 of an
-+ NT_GNU_ABI_TAG note section entry. */
-+#define ELF_NOTE_OS_LINUX 0
-+#define ELF_NOTE_OS_GNU 1
-+#define ELF_NOTE_OS_SOLARIS2 2
-+#define ELF_NOTE_OS_FREEBSD 3
-+
-+/* Synthetic hwcap information. The descriptor begins with two words:
-+ word 0: number of entries
-+ word 1: bitmask of enabled entries
-+ Then follow variable-length entries, one byte followed by a
-+ '\0'-terminated hwcap name string. The byte gives the bit
-+ number to test if enabled, (1U << bit) & bitmask. */
-+#define NT_GNU_HWCAP 2
-+
-+/* Build ID bits as generated by ld --build-id.
-+ The descriptor consists of any nonzero number of bytes. */
-+#define NT_GNU_BUILD_ID 3
-+
-+/* Version note generated by GNU gold containing a version string. */
-+#define NT_GNU_GOLD_VERSION 4
-+
-+
-+/* Move records. */
-+typedef struct
-+{
-+ Elf32_Xword m_value; /* Symbol value. */
-+ Elf32_Word m_info; /* Size and index. */
-+ Elf32_Word m_poffset; /* Symbol offset. */
-+ Elf32_Half m_repeat; /* Repeat count. */
-+ Elf32_Half m_stride; /* Stride info. */
-+} Elf32_Move;
-+
-+typedef struct
-+{
-+ Elf64_Xword m_value; /* Symbol value. */
-+ Elf64_Xword m_info; /* Size and index. */
-+ Elf64_Xword m_poffset; /* Symbol offset. */
-+ Elf64_Half m_repeat; /* Repeat count. */
-+ Elf64_Half m_stride; /* Stride info. */
-+} Elf64_Move;
-+
-+/* Macro to construct move records. */
-+#define ELF32_M_SYM(info) ((info) >> 8)
-+#define ELF32_M_SIZE(info) ((unsigned char) (info))
-+#define ELF32_M_INFO(sym, size) (((sym) << 8) + (unsigned char) (size))
-+
-+#define ELF64_M_SYM(info) ELF32_M_SYM (info)
-+#define ELF64_M_SIZE(info) ELF32_M_SIZE (info)
-+#define ELF64_M_INFO(sym, size) ELF32_M_INFO (sym, size)
-+
-+
-+/* Motorola 68k specific definitions. */
-+
-+/* Values for Elf32_Ehdr.e_flags. */
-+#define EF_CPU32 0x00810000
-+
-+/* m68k relocs. */
-+
-+#define R_68K_NONE 0 /* No reloc */
-+#define R_68K_32 1 /* Direct 32 bit */
-+#define R_68K_16 2 /* Direct 16 bit */
-+#define R_68K_8 3 /* Direct 8 bit */
-+#define R_68K_PC32 4 /* PC relative 32 bit */
-+#define R_68K_PC16 5 /* PC relative 16 bit */
-+#define R_68K_PC8 6 /* PC relative 8 bit */
-+#define R_68K_GOT32 7 /* 32 bit PC relative GOT entry */
-+#define R_68K_GOT16 8 /* 16 bit PC relative GOT entry */
-+#define R_68K_GOT8 9 /* 8 bit PC relative GOT entry */
-+#define R_68K_GOT32O 10 /* 32 bit GOT offset */
-+#define R_68K_GOT16O 11 /* 16 bit GOT offset */
-+#define R_68K_GOT8O 12 /* 8 bit GOT offset */
-+#define R_68K_PLT32 13 /* 32 bit PC relative PLT address */
-+#define R_68K_PLT16 14 /* 16 bit PC relative PLT address */
-+#define R_68K_PLT8 15 /* 8 bit PC relative PLT address */
-+#define R_68K_PLT32O 16 /* 32 bit PLT offset */
-+#define R_68K_PLT16O 17 /* 16 bit PLT offset */
-+#define R_68K_PLT8O 18 /* 8 bit PLT offset */
-+#define R_68K_COPY 19 /* Copy symbol at runtime */
-+#define R_68K_GLOB_DAT 20 /* Create GOT entry */
-+#define R_68K_JMP_SLOT 21 /* Create PLT entry */
-+#define R_68K_RELATIVE 22 /* Adjust by program base */
-+#define R_68K_TLS_GD32 25 /* 32 bit GOT offset for GD */
-+#define R_68K_TLS_GD16 26 /* 16 bit GOT offset for GD */
-+#define R_68K_TLS_GD8 27 /* 8 bit GOT offset for GD */
-+#define R_68K_TLS_LDM32 28 /* 32 bit GOT offset for LDM */
-+#define R_68K_TLS_LDM16 29 /* 16 bit GOT offset for LDM */
-+#define R_68K_TLS_LDM8 30 /* 8 bit GOT offset for LDM */
-+#define R_68K_TLS_LDO32 31 /* 32 bit module-relative offset */
-+#define R_68K_TLS_LDO16 32 /* 16 bit module-relative offset */
-+#define R_68K_TLS_LDO8 33 /* 8 bit module-relative offset */
-+#define R_68K_TLS_IE32 34 /* 32 bit GOT offset for IE */
-+#define R_68K_TLS_IE16 35 /* 16 bit GOT offset for IE */
-+#define R_68K_TLS_IE8 36 /* 8 bit GOT offset for IE */
-+#define R_68K_TLS_LE32 37 /* 32 bit offset relative to
-+ static TLS block */
-+#define R_68K_TLS_LE16 38 /* 16 bit offset relative to
-+ static TLS block */
-+#define R_68K_TLS_LE8 39 /* 8 bit offset relative to
-+ static TLS block */
-+#define R_68K_TLS_DTPMOD32 40 /* 32 bit module number */
-+#define R_68K_TLS_DTPREL32 41 /* 32 bit module-relative offset */
-+#define R_68K_TLS_TPREL32 42 /* 32 bit TP-relative offset */
-+/* Keep this the last entry. */
-+#define R_68K_NUM 43
-+
-+/* Intel 80386 specific definitions. */
-+
-+/* i386 relocs. */
-+
-+#define R_386_NONE 0 /* No reloc */
-+#define R_386_32 1 /* Direct 32 bit */
-+#define R_386_PC32 2 /* PC relative 32 bit */
-+#define R_386_GOT32 3 /* 32 bit GOT entry */
-+#define R_386_PLT32 4 /* 32 bit PLT address */
-+#define R_386_COPY 5 /* Copy symbol at runtime */
-+#define R_386_GLOB_DAT 6 /* Create GOT entry */
-+#define R_386_JMP_SLOT 7 /* Create PLT entry */
-+#define R_386_RELATIVE 8 /* Adjust by program base */
-+#define R_386_GOTOFF 9 /* 32 bit offset to GOT */
-+#define R_386_GOTPC 10 /* 32 bit PC relative offset to GOT */
-+#define R_386_32PLT 11
-+#define R_386_TLS_TPOFF 14 /* Offset in static TLS block */
-+#define R_386_TLS_IE 15 /* Address of GOT entry for static TLS
-+ block offset */
-+#define R_386_TLS_GOTIE 16 /* GOT entry for static TLS block
-+ offset */
-+#define R_386_TLS_LE 17 /* Offset relative to static TLS
-+ block */
-+#define R_386_TLS_GD 18 /* Direct 32 bit for GNU version of
-+ general dynamic thread local data */
-+#define R_386_TLS_LDM 19 /* Direct 32 bit for GNU version of
-+ local dynamic thread local data
-+ in LE code */
-+#define R_386_16 20
-+#define R_386_PC16 21
-+#define R_386_8 22
-+#define R_386_PC8 23
-+#define R_386_TLS_GD_32 24 /* Direct 32 bit for general dynamic
-+ thread local data */
-+#define R_386_TLS_GD_PUSH 25 /* Tag for pushl in GD TLS code */
-+#define R_386_TLS_GD_CALL 26 /* Relocation for call to
-+ __tls_get_addr() */
-+#define R_386_TLS_GD_POP 27 /* Tag for popl in GD TLS code */
-+#define R_386_TLS_LDM_32 28 /* Direct 32 bit for local dynamic
-+ thread local data in LE code */
-+#define R_386_TLS_LDM_PUSH 29 /* Tag for pushl in LDM TLS code */
-+#define R_386_TLS_LDM_CALL 30 /* Relocation for call to
-+ __tls_get_addr() in LDM code */
-+#define R_386_TLS_LDM_POP 31 /* Tag for popl in LDM TLS code */
-+#define R_386_TLS_LDO_32 32 /* Offset relative to TLS block */
-+#define R_386_TLS_IE_32 33 /* GOT entry for negated static TLS
-+ block offset */
-+#define R_386_TLS_LE_32 34 /* Negated offset relative to static
-+ TLS block */
-+#define R_386_TLS_DTPMOD32 35 /* ID of module containing symbol */
-+#define R_386_TLS_DTPOFF32 36 /* Offset in TLS block */
-+#define R_386_TLS_TPOFF32 37 /* Negated offset in static TLS block */
-+/* 38? */
-+#define R_386_TLS_GOTDESC 39 /* GOT offset for TLS descriptor. */
-+#define R_386_TLS_DESC_CALL 40 /* Marker of call through TLS
-+ descriptor for
-+ relaxation. */
-+#define R_386_TLS_DESC 41 /* TLS descriptor containing
-+ pointer to code and to
-+ argument, returning the TLS
-+ offset for the symbol. */
-+#define R_386_IRELATIVE 42 /* Adjust indirectly by program base */
-+/* Keep this the last entry. */
-+#define R_386_NUM 43
-+
-+/* SUN SPARC specific definitions. */
-+
-+/* Legal values for ST_TYPE subfield of st_info (symbol type). */
-+
-+#define STT_SPARC_REGISTER 13 /* Global register reserved to app. */
-+
-+/* Values for Elf64_Ehdr.e_flags. */
-+
-+#define EF_SPARCV9_MM 3
-+#define EF_SPARCV9_TSO 0
-+#define EF_SPARCV9_PSO 1
-+#define EF_SPARCV9_RMO 2
-+#define EF_SPARC_LEDATA 0x800000 /* little endian data */
-+#define EF_SPARC_EXT_MASK 0xFFFF00
-+#define EF_SPARC_32PLUS 0x000100 /* generic V8+ features */
-+#define EF_SPARC_SUN_US1 0x000200 /* Sun UltraSPARC1 extensions */
-+#define EF_SPARC_HAL_R1 0x000400 /* HAL R1 extensions */
-+#define EF_SPARC_SUN_US3 0x000800 /* Sun UltraSPARCIII extensions */
-+
-+/* SPARC relocs. */
-+
-+#define R_SPARC_NONE 0 /* No reloc */
-+#define R_SPARC_8 1 /* Direct 8 bit */
-+#define R_SPARC_16 2 /* Direct 16 bit */
-+#define R_SPARC_32 3 /* Direct 32 bit */
-+#define R_SPARC_DISP8 4 /* PC relative 8 bit */
-+#define R_SPARC_DISP16 5 /* PC relative 16 bit */
-+#define R_SPARC_DISP32 6 /* PC relative 32 bit */
-+#define R_SPARC_WDISP30 7 /* PC relative 30 bit shifted */
-+#define R_SPARC_WDISP22 8 /* PC relative 22 bit shifted */
-+#define R_SPARC_HI22 9 /* High 22 bit */
-+#define R_SPARC_22 10 /* Direct 22 bit */
-+#define R_SPARC_13 11 /* Direct 13 bit */
-+#define R_SPARC_LO10 12 /* Truncated 10 bit */
-+#define R_SPARC_GOT10 13 /* Truncated 10 bit GOT entry */
-+#define R_SPARC_GOT13 14 /* 13 bit GOT entry */
-+#define R_SPARC_GOT22 15 /* 22 bit GOT entry shifted */
-+#define R_SPARC_PC10 16 /* PC relative 10 bit truncated */
-+#define R_SPARC_PC22 17 /* PC relative 22 bit shifted */
-+#define R_SPARC_WPLT30 18 /* 30 bit PC relative PLT address */
-+#define R_SPARC_COPY 19 /* Copy symbol at runtime */
-+#define R_SPARC_GLOB_DAT 20 /* Create GOT entry */
-+#define R_SPARC_JMP_SLOT 21 /* Create PLT entry */
-+#define R_SPARC_RELATIVE 22 /* Adjust by program base */
-+#define R_SPARC_UA32 23 /* Direct 32 bit unaligned */
-+
-+/* Additional Sparc64 relocs. */
-+
-+#define R_SPARC_PLT32 24 /* Direct 32 bit ref to PLT entry */
-+#define R_SPARC_HIPLT22 25 /* High 22 bit PLT entry */
-+#define R_SPARC_LOPLT10 26 /* Truncated 10 bit PLT entry */
-+#define R_SPARC_PCPLT32 27 /* PC rel 32 bit ref to PLT entry */
-+#define R_SPARC_PCPLT22 28 /* PC rel high 22 bit PLT entry */
-+#define R_SPARC_PCPLT10 29 /* PC rel trunc 10 bit PLT entry */
-+#define R_SPARC_10 30 /* Direct 10 bit */
-+#define R_SPARC_11 31 /* Direct 11 bit */
-+#define R_SPARC_64 32 /* Direct 64 bit */
-+#define R_SPARC_OLO10 33 /* 10bit with secondary 13bit addend */
-+#define R_SPARC_HH22 34 /* Top 22 bits of direct 64 bit */
-+#define R_SPARC_HM10 35 /* High middle 10 bits of ... */
-+#define R_SPARC_LM22 36 /* Low middle 22 bits of ... */
-+#define R_SPARC_PC_HH22 37 /* Top 22 bits of pc rel 64 bit */
-+#define R_SPARC_PC_HM10 38 /* High middle 10 bit of ... */
-+#define R_SPARC_PC_LM22 39 /* Low miggle 22 bits of ... */
-+#define R_SPARC_WDISP16 40 /* PC relative 16 bit shifted */
-+#define R_SPARC_WDISP19 41 /* PC relative 19 bit shifted */
-+#define R_SPARC_GLOB_JMP 42 /* was part of v9 ABI but was removed */
-+#define R_SPARC_7 43 /* Direct 7 bit */
-+#define R_SPARC_5 44 /* Direct 5 bit */
-+#define R_SPARC_6 45 /* Direct 6 bit */
-+#define R_SPARC_DISP64 46 /* PC relative 64 bit */
-+#define R_SPARC_PLT64 47 /* Direct 64 bit ref to PLT entry */
-+#define R_SPARC_HIX22 48 /* High 22 bit complemented */
-+#define R_SPARC_LOX10 49 /* Truncated 11 bit complemented */
-+#define R_SPARC_H44 50 /* Direct high 12 of 44 bit */
-+#define R_SPARC_M44 51 /* Direct mid 22 of 44 bit */
-+#define R_SPARC_L44 52 /* Direct low 10 of 44 bit */
-+#define R_SPARC_REGISTER 53 /* Global register usage */
-+#define R_SPARC_UA64 54 /* Direct 64 bit unaligned */
-+#define R_SPARC_UA16 55 /* Direct 16 bit unaligned */
-+#define R_SPARC_TLS_GD_HI22 56
-+#define R_SPARC_TLS_GD_LO10 57
-+#define R_SPARC_TLS_GD_ADD 58
-+#define R_SPARC_TLS_GD_CALL 59
-+#define R_SPARC_TLS_LDM_HI22 60
-+#define R_SPARC_TLS_LDM_LO10 61
-+#define R_SPARC_TLS_LDM_ADD 62
-+#define R_SPARC_TLS_LDM_CALL 63
-+#define R_SPARC_TLS_LDO_HIX22 64
-+#define R_SPARC_TLS_LDO_LOX10 65
-+#define R_SPARC_TLS_LDO_ADD 66
-+#define R_SPARC_TLS_IE_HI22 67
-+#define R_SPARC_TLS_IE_LO10 68
-+#define R_SPARC_TLS_IE_LD 69
-+#define R_SPARC_TLS_IE_LDX 70
-+#define R_SPARC_TLS_IE_ADD 71
-+#define R_SPARC_TLS_LE_HIX22 72
-+#define R_SPARC_TLS_LE_LOX10 73
-+#define R_SPARC_TLS_DTPMOD32 74
-+#define R_SPARC_TLS_DTPMOD64 75
-+#define R_SPARC_TLS_DTPOFF32 76
-+#define R_SPARC_TLS_DTPOFF64 77
-+#define R_SPARC_TLS_TPOFF32 78
-+#define R_SPARC_TLS_TPOFF64 79
-+#define R_SPARC_GOTDATA_HIX22 80
-+#define R_SPARC_GOTDATA_LOX10 81
-+#define R_SPARC_GOTDATA_OP_HIX22 82
-+#define R_SPARC_GOTDATA_OP_LOX10 83
-+#define R_SPARC_GOTDATA_OP 84
-+#define R_SPARC_H34 85
-+#define R_SPARC_SIZE32 86
-+#define R_SPARC_SIZE64 87
-+#define R_SPARC_WDISP10 88
-+#define R_SPARC_JMP_IREL 248
-+#define R_SPARC_IRELATIVE 249
-+#define R_SPARC_GNU_VTINHERIT 250
-+#define R_SPARC_GNU_VTENTRY 251
-+#define R_SPARC_REV32 252
-+/* Keep this the last entry. */
-+#define R_SPARC_NUM 253
-+
-+/* For Sparc64, legal values for d_tag of Elf64_Dyn. */
-+
-+#define DT_SPARC_REGISTER 0x70000001
-+#define DT_SPARC_NUM 2
-+
-+/* MIPS R3000 specific definitions. */
-+
-+/* Legal values for e_flags field of Elf32_Ehdr. */
-+
-+#define EF_MIPS_NOREORDER 1 /* A .noreorder directive was used */
-+#define EF_MIPS_PIC 2 /* Contains PIC code */
-+#define EF_MIPS_CPIC 4 /* Uses PIC calling sequence */
-+#define EF_MIPS_XGOT 8
-+#define EF_MIPS_64BIT_WHIRL 16
-+#define EF_MIPS_ABI2 32
-+#define EF_MIPS_ABI_ON32 64
-+#define EF_MIPS_ARCH 0xf0000000 /* MIPS architecture level */
-+
-+/* Legal values for MIPS architecture level. */
-+
-+#define EF_MIPS_ARCH_1 0x00000000 /* -mips1 code. */
-+#define EF_MIPS_ARCH_2 0x10000000 /* -mips2 code. */
-+#define EF_MIPS_ARCH_3 0x20000000 /* -mips3 code. */
-+#define EF_MIPS_ARCH_4 0x30000000 /* -mips4 code. */
-+#define EF_MIPS_ARCH_5 0x40000000 /* -mips5 code. */
-+#define EF_MIPS_ARCH_32 0x60000000 /* MIPS32 code. */
-+#define EF_MIPS_ARCH_64 0x70000000 /* MIPS64 code. */
-+
-+/* The following are non-official names and should not be used. */
-+
-+#define E_MIPS_ARCH_1 0x00000000 /* -mips1 code. */
-+#define E_MIPS_ARCH_2 0x10000000 /* -mips2 code. */
-+#define E_MIPS_ARCH_3 0x20000000 /* -mips3 code. */
-+#define E_MIPS_ARCH_4 0x30000000 /* -mips4 code. */
-+#define E_MIPS_ARCH_5 0x40000000 /* -mips5 code. */
-+#define E_MIPS_ARCH_32 0x60000000 /* MIPS32 code. */
-+#define E_MIPS_ARCH_64 0x70000000 /* MIPS64 code. */
-+
-+/* Special section indices. */
-+
-+#define SHN_MIPS_ACOMMON 0xff00 /* Allocated common symbols */
-+#define SHN_MIPS_TEXT 0xff01 /* Allocated test symbols. */
-+#define SHN_MIPS_DATA 0xff02 /* Allocated data symbols. */
-+#define SHN_MIPS_SCOMMON 0xff03 /* Small common symbols */
-+#define SHN_MIPS_SUNDEFINED 0xff04 /* Small undefined symbols */
-+
-+/* Legal values for sh_type field of Elf32_Shdr. */
-+
-+#define SHT_MIPS_LIBLIST 0x70000000 /* Shared objects used in link */
-+#define SHT_MIPS_MSYM 0x70000001
-+#define SHT_MIPS_CONFLICT 0x70000002 /* Conflicting symbols */
-+#define SHT_MIPS_GPTAB 0x70000003 /* Global data area sizes */
-+#define SHT_MIPS_UCODE 0x70000004 /* Reserved for SGI/MIPS compilers */
-+#define SHT_MIPS_DEBUG 0x70000005 /* MIPS ECOFF debugging information*/
-+#define SHT_MIPS_REGINFO 0x70000006 /* Register usage information */
-+#define SHT_MIPS_PACKAGE 0x70000007
-+#define SHT_MIPS_PACKSYM 0x70000008
-+#define SHT_MIPS_RELD 0x70000009
-+#define SHT_MIPS_IFACE 0x7000000b
-+#define SHT_MIPS_CONTENT 0x7000000c
-+#define SHT_MIPS_OPTIONS 0x7000000d /* Miscellaneous options. */
-+#define SHT_MIPS_SHDR 0x70000010
-+#define SHT_MIPS_FDESC 0x70000011
-+#define SHT_MIPS_EXTSYM 0x70000012
-+#define SHT_MIPS_DENSE 0x70000013
-+#define SHT_MIPS_PDESC 0x70000014
-+#define SHT_MIPS_LOCSYM 0x70000015
-+#define SHT_MIPS_AUXSYM 0x70000016
-+#define SHT_MIPS_OPTSYM 0x70000017
-+#define SHT_MIPS_LOCSTR 0x70000018
-+#define SHT_MIPS_LINE 0x70000019
-+#define SHT_MIPS_RFDESC 0x7000001a
-+#define SHT_MIPS_DELTASYM 0x7000001b
-+#define SHT_MIPS_DELTAINST 0x7000001c
-+#define SHT_MIPS_DELTACLASS 0x7000001d
-+#define SHT_MIPS_DWARF 0x7000001e /* DWARF debugging information. */
-+#define SHT_MIPS_DELTADECL 0x7000001f
-+#define SHT_MIPS_SYMBOL_LIB 0x70000020
-+#define SHT_MIPS_EVENTS 0x70000021 /* Event section. */
-+#define SHT_MIPS_TRANSLATE 0x70000022
-+#define SHT_MIPS_PIXIE 0x70000023
-+#define SHT_MIPS_XLATE 0x70000024
-+#define SHT_MIPS_XLATE_DEBUG 0x70000025
-+#define SHT_MIPS_WHIRL 0x70000026
-+#define SHT_MIPS_EH_REGION 0x70000027
-+#define SHT_MIPS_XLATE_OLD 0x70000028
-+#define SHT_MIPS_PDR_EXCEPTION 0x70000029
-+
-+/* Legal values for sh_flags field of Elf32_Shdr. */
-+
-+#define SHF_MIPS_GPREL 0x10000000 /* Must be part of global data area */
-+#define SHF_MIPS_MERGE 0x20000000
-+#define SHF_MIPS_ADDR 0x40000000
-+#define SHF_MIPS_STRINGS 0x80000000
-+#define SHF_MIPS_NOSTRIP 0x08000000
-+#define SHF_MIPS_LOCAL 0x04000000
-+#define SHF_MIPS_NAMES 0x02000000
-+#define SHF_MIPS_NODUPE 0x01000000
-+
-+
-+/* Symbol tables. */
-+
-+/* MIPS specific values for `st_other'. */
-+#define STO_MIPS_DEFAULT 0x0
-+#define STO_MIPS_INTERNAL 0x1
-+#define STO_MIPS_HIDDEN 0x2
-+#define STO_MIPS_PROTECTED 0x3
-+#define STO_MIPS_PLT 0x8
-+#define STO_MIPS_SC_ALIGN_UNUSED 0xff
-+
-+/* MIPS specific values for `st_info'. */
-+#define STB_MIPS_SPLIT_COMMON 13
-+
-+/* Entries found in sections of type SHT_MIPS_GPTAB. */
-+
-+typedef union
-+{
-+ struct
-+ {
-+ Elf32_Word gt_current_g_value; /* -G value used for compilation */
-+ Elf32_Word gt_unused; /* Not used */
-+ } gt_header; /* First entry in section */
-+ struct
-+ {
-+ Elf32_Word gt_g_value; /* If this value were used for -G */
-+ Elf32_Word gt_bytes; /* This many bytes would be used */
-+ } gt_entry; /* Subsequent entries in section */
-+} Elf32_gptab;
-+
-+/* Entry found in sections of type SHT_MIPS_REGINFO. */
-+
-+typedef struct
-+{
-+ Elf32_Word ri_gprmask; /* General registers used */
-+ Elf32_Word ri_cprmask[4]; /* Coprocessor registers used */
-+ Elf32_Sword ri_gp_value; /* $gp register value */
-+} Elf32_RegInfo;
-+
-+/* Entries found in sections of type SHT_MIPS_OPTIONS. */
-+
-+typedef struct
-+{
-+ unsigned char kind; /* Determines interpretation of the
-+ variable part of descriptor. */
-+ unsigned char size; /* Size of descriptor, including header. */
-+ Elf32_Section section; /* Section header index of section affected,
-+ 0 for global options. */
-+ Elf32_Word info; /* Kind-specific information. */
-+} Elf_Options;
-+
-+/* Values for `kind' field in Elf_Options. */
-+
-+#define ODK_NULL 0 /* Undefined. */
-+#define ODK_REGINFO 1 /* Register usage information. */
-+#define ODK_EXCEPTIONS 2 /* Exception processing options. */
-+#define ODK_PAD 3 /* Section padding options. */
-+#define ODK_HWPATCH 4 /* Hardware workarounds performed */
-+#define ODK_FILL 5 /* record the fill value used by the linker. */
-+#define ODK_TAGS 6 /* reserve space for desktop tools to write. */
-+#define ODK_HWAND 7 /* HW workarounds. 'AND' bits when merging. */
-+#define ODK_HWOR 8 /* HW workarounds. 'OR' bits when merging. */
-+
-+/* Values for `info' in Elf_Options for ODK_EXCEPTIONS entries. */
-+
-+#define OEX_FPU_MIN 0x1f /* FPE's which MUST be enabled. */
-+#define OEX_FPU_MAX 0x1f00 /* FPE's which MAY be enabled. */
-+#define OEX_PAGE0 0x10000 /* page zero must be mapped. */
-+#define OEX_SMM 0x20000 /* Force sequential memory mode? */
-+#define OEX_FPDBUG 0x40000 /* Force floating point debug mode? */
-+#define OEX_PRECISEFP OEX_FPDBUG
-+#define OEX_DISMISS 0x80000 /* Dismiss invalid address faults? */
-+
-+#define OEX_FPU_INVAL 0x10
-+#define OEX_FPU_DIV0 0x08
-+#define OEX_FPU_OFLO 0x04
-+#define OEX_FPU_UFLO 0x02
-+#define OEX_FPU_INEX 0x01
-+
-+/* Masks for `info' in Elf_Options for an ODK_HWPATCH entry. */
-+
-+#define OHW_R4KEOP 0x1 /* R4000 end-of-page patch. */
-+#define OHW_R8KPFETCH 0x2 /* may need R8000 prefetch patch. */
-+#define OHW_R5KEOP 0x4 /* R5000 end-of-page patch. */
-+#define OHW_R5KCVTL 0x8 /* R5000 cvt.[ds].l bug. clean=1. */
-+
-+#define OPAD_PREFIX 0x1
-+#define OPAD_POSTFIX 0x2
-+#define OPAD_SYMBOL 0x4
-+
-+/* Entry found in `.options' section. */
-+
-+typedef struct
-+{
-+ Elf32_Word hwp_flags1; /* Extra flags. */
-+ Elf32_Word hwp_flags2; /* Extra flags. */
-+} Elf_Options_Hw;
-+
-+/* Masks for `info' in ElfOptions for ODK_HWAND and ODK_HWOR entries. */
-+
-+#define OHWA0_R4KEOP_CHECKED 0x00000001
-+#define OHWA1_R4KEOP_CLEAN 0x00000002
-+
-+/* MIPS relocs. */
-+
-+#define R_MIPS_NONE 0 /* No reloc */
-+#define R_MIPS_16 1 /* Direct 16 bit */
-+#define R_MIPS_32 2 /* Direct 32 bit */
-+#define R_MIPS_REL32 3 /* PC relative 32 bit */
-+#define R_MIPS_26 4 /* Direct 26 bit shifted */
-+#define R_MIPS_HI16 5 /* High 16 bit */
-+#define R_MIPS_LO16 6 /* Low 16 bit */
-+#define R_MIPS_GPREL16 7 /* GP relative 16 bit */
-+#define R_MIPS_LITERAL 8 /* 16 bit literal entry */
-+#define R_MIPS_GOT16 9 /* 16 bit GOT entry */
-+#define R_MIPS_PC16 10 /* PC relative 16 bit */
-+#define R_MIPS_CALL16 11 /* 16 bit GOT entry for function */
-+#define R_MIPS_GPREL32 12 /* GP relative 32 bit */
-+
-+#define R_MIPS_SHIFT5 16
-+#define R_MIPS_SHIFT6 17
-+#define R_MIPS_64 18
-+#define R_MIPS_GOT_DISP 19
-+#define R_MIPS_GOT_PAGE 20
-+#define R_MIPS_GOT_OFST 21
-+#define R_MIPS_GOT_HI16 22
-+#define R_MIPS_GOT_LO16 23
-+#define R_MIPS_SUB 24
-+#define R_MIPS_INSERT_A 25
-+#define R_MIPS_INSERT_B 26
-+#define R_MIPS_DELETE 27
-+#define R_MIPS_HIGHER 28
-+#define R_MIPS_HIGHEST 29
-+#define R_MIPS_CALL_HI16 30
-+#define R_MIPS_CALL_LO16 31
-+#define R_MIPS_SCN_DISP 32
-+#define R_MIPS_REL16 33
-+#define R_MIPS_ADD_IMMEDIATE 34
-+#define R_MIPS_PJUMP 35
-+#define R_MIPS_RELGOT 36
-+#define R_MIPS_JALR 37
-+#define R_MIPS_TLS_DTPMOD32 38 /* Module number 32 bit */
-+#define R_MIPS_TLS_DTPREL32 39 /* Module-relative offset 32 bit */
-+#define R_MIPS_TLS_DTPMOD64 40 /* Module number 64 bit */
-+#define R_MIPS_TLS_DTPREL64 41 /* Module-relative offset 64 bit */
-+#define R_MIPS_TLS_GD 42 /* 16 bit GOT offset for GD */
-+#define R_MIPS_TLS_LDM 43 /* 16 bit GOT offset for LDM */
-+#define R_MIPS_TLS_DTPREL_HI16 44 /* Module-relative offset, high 16 bits */
-+#define R_MIPS_TLS_DTPREL_LO16 45 /* Module-relative offset, low 16 bits */
-+#define R_MIPS_TLS_GOTTPREL 46 /* 16 bit GOT offset for IE */
-+#define R_MIPS_TLS_TPREL32 47 /* TP-relative offset, 32 bit */
-+#define R_MIPS_TLS_TPREL64 48 /* TP-relative offset, 64 bit */
-+#define R_MIPS_TLS_TPREL_HI16 49 /* TP-relative offset, high 16 bits */
-+#define R_MIPS_TLS_TPREL_LO16 50 /* TP-relative offset, low 16 bits */
-+#define R_MIPS_GLOB_DAT 51
-+#define R_MIPS_COPY 126
-+#define R_MIPS_JUMP_SLOT 127
-+/* Keep this the last entry. */
-+#define R_MIPS_NUM 128
-+
-+/* Legal values for p_type field of Elf32_Phdr. */
-+
-+#define PT_MIPS_REGINFO 0x70000000 /* Register usage information */
-+#define PT_MIPS_RTPROC 0x70000001 /* Runtime procedure table. */
-+#define PT_MIPS_OPTIONS 0x70000002
-+
-+/* Special program header types. */
-+
-+#define PF_MIPS_LOCAL 0x10000000
-+
-+/* Legal values for d_tag field of Elf32_Dyn. */
-+
-+#define DT_MIPS_RLD_VERSION 0x70000001 /* Runtime linker interface version */
-+#define DT_MIPS_TIME_STAMP 0x70000002 /* Timestamp */
-+#define DT_MIPS_ICHECKSUM 0x70000003 /* Checksum */
-+#define DT_MIPS_IVERSION 0x70000004 /* Version string (string tbl index) */
-+#define DT_MIPS_FLAGS 0x70000005 /* Flags */
-+#define DT_MIPS_BASE_ADDRESS 0x70000006 /* Base address */
-+#define DT_MIPS_MSYM 0x70000007
-+#define DT_MIPS_CONFLICT 0x70000008 /* Address of CONFLICT section */
-+#define DT_MIPS_LIBLIST 0x70000009 /* Address of LIBLIST section */
-+#define DT_MIPS_LOCAL_GOTNO 0x7000000a /* Number of local GOT entries */
-+#define DT_MIPS_CONFLICTNO 0x7000000b /* Number of CONFLICT entries */
-+#define DT_MIPS_LIBLISTNO 0x70000010 /* Number of LIBLIST entries */
-+#define DT_MIPS_SYMTABNO 0x70000011 /* Number of DYNSYM entries */
-+#define DT_MIPS_UNREFEXTNO 0x70000012 /* First external DYNSYM */
-+#define DT_MIPS_GOTSYM 0x70000013 /* First GOT entry in DYNSYM */
-+#define DT_MIPS_HIPAGENO 0x70000014 /* Number of GOT page table entries */
-+#define DT_MIPS_RLD_MAP 0x70000016 /* Address of run time loader map. */
-+#define DT_MIPS_DELTA_CLASS 0x70000017 /* Delta C++ class definition. */
-+#define DT_MIPS_DELTA_CLASS_NO 0x70000018 /* Number of entries in
-+ DT_MIPS_DELTA_CLASS. */
-+#define DT_MIPS_DELTA_INSTANCE 0x70000019 /* Delta C++ class instances. */
-+#define DT_MIPS_DELTA_INSTANCE_NO 0x7000001a /* Number of entries in
-+ DT_MIPS_DELTA_INSTANCE. */
-+#define DT_MIPS_DELTA_RELOC 0x7000001b /* Delta relocations. */
-+#define DT_MIPS_DELTA_RELOC_NO 0x7000001c /* Number of entries in
-+ DT_MIPS_DELTA_RELOC. */
-+#define DT_MIPS_DELTA_SYM 0x7000001d /* Delta symbols that Delta
-+ relocations refer to. */
-+#define DT_MIPS_DELTA_SYM_NO 0x7000001e /* Number of entries in
-+ DT_MIPS_DELTA_SYM. */
-+#define DT_MIPS_DELTA_CLASSSYM 0x70000020 /* Delta symbols that hold the
-+ class declaration. */
-+#define DT_MIPS_DELTA_CLASSSYM_NO 0x70000021 /* Number of entries in
-+ DT_MIPS_DELTA_CLASSSYM. */
-+#define DT_MIPS_CXX_FLAGS 0x70000022 /* Flags indicating for C++ flavor. */
-+#define DT_MIPS_PIXIE_INIT 0x70000023
-+#define DT_MIPS_SYMBOL_LIB 0x70000024
-+#define DT_MIPS_LOCALPAGE_GOTIDX 0x70000025
-+#define DT_MIPS_LOCAL_GOTIDX 0x70000026
-+#define DT_MIPS_HIDDEN_GOTIDX 0x70000027
-+#define DT_MIPS_PROTECTED_GOTIDX 0x70000028
-+#define DT_MIPS_OPTIONS 0x70000029 /* Address of .options. */
-+#define DT_MIPS_INTERFACE 0x7000002a /* Address of .interface. */
-+#define DT_MIPS_DYNSTR_ALIGN 0x7000002b
-+#define DT_MIPS_INTERFACE_SIZE 0x7000002c /* Size of the .interface section. */
-+#define DT_MIPS_RLD_TEXT_RESOLVE_ADDR 0x7000002d /* Address of rld_text_rsolve
-+ function stored in GOT. */
-+#define DT_MIPS_PERF_SUFFIX 0x7000002e /* Default suffix of dso to be added
-+ by rld on dlopen() calls. */
-+#define DT_MIPS_COMPACT_SIZE 0x7000002f /* (O32)Size of compact rel section. */
-+#define DT_MIPS_GP_VALUE 0x70000030 /* GP value for aux GOTs. */
-+#define DT_MIPS_AUX_DYNAMIC 0x70000031 /* Address of aux .dynamic. */
-+/* The address of .got.plt in an executable using the new non-PIC ABI. */
-+#define DT_MIPS_PLTGOT 0x70000032
-+/* The base of the PLT in an executable using the new non-PIC ABI if that
-+ PLT is writable. For a non-writable PLT, this is omitted or has a zero
-+ value. */
-+#define DT_MIPS_RWPLT 0x70000034
-+#define DT_MIPS_NUM 0x35
-+
-+/* Legal values for DT_MIPS_FLAGS Elf32_Dyn entry. */
-+
-+#define RHF_NONE 0 /* No flags */
-+#define RHF_QUICKSTART (1 << 0) /* Use quickstart */
-+#define RHF_NOTPOT (1 << 1) /* Hash size not power of 2 */
-+#define RHF_NO_LIBRARY_REPLACEMENT (1 << 2) /* Ignore LD_LIBRARY_PATH */
-+#define RHF_NO_MOVE (1 << 3)
-+#define RHF_SGI_ONLY (1 << 4)
-+#define RHF_GUARANTEE_INIT (1 << 5)
-+#define RHF_DELTA_C_PLUS_PLUS (1 << 6)
-+#define RHF_GUARANTEE_START_INIT (1 << 7)
-+#define RHF_PIXIE (1 << 8)
-+#define RHF_DEFAULT_DELAY_LOAD (1 << 9)
-+#define RHF_REQUICKSTART (1 << 10)
-+#define RHF_REQUICKSTARTED (1 << 11)
-+#define RHF_CORD (1 << 12)
-+#define RHF_NO_UNRES_UNDEF (1 << 13)
-+#define RHF_RLD_ORDER_SAFE (1 << 14)
-+
-+/* Entries found in sections of type SHT_MIPS_LIBLIST. */
-+
-+typedef struct
-+{
-+ Elf32_Word l_name; /* Name (string table index) */
-+ Elf32_Word l_time_stamp; /* Timestamp */
-+ Elf32_Word l_checksum; /* Checksum */
-+ Elf32_Word l_version; /* Interface version */
-+ Elf32_Word l_flags; /* Flags */
-+} Elf32_Lib;
-+
-+typedef struct
-+{
-+ Elf64_Word l_name; /* Name (string table index) */
-+ Elf64_Word l_time_stamp; /* Timestamp */
-+ Elf64_Word l_checksum; /* Checksum */
-+ Elf64_Word l_version; /* Interface version */
-+ Elf64_Word l_flags; /* Flags */
-+} Elf64_Lib;
-+
-+
-+/* Legal values for l_flags. */
-+
-+#define LL_NONE 0
-+#define LL_EXACT_MATCH (1 << 0) /* Require exact match */
-+#define LL_IGNORE_INT_VER (1 << 1) /* Ignore interface version */
-+#define LL_REQUIRE_MINOR (1 << 2)
-+#define LL_EXPORTS (1 << 3)
-+#define LL_DELAY_LOAD (1 << 4)
-+#define LL_DELTA (1 << 5)
-+
-+/* Entries found in sections of type SHT_MIPS_CONFLICT. */
-+
-+typedef Elf32_Addr Elf32_Conflict;
-+
-+
-+/* HPPA specific definitions. */
-+
-+/* Legal values for e_flags field of Elf32_Ehdr. */
-+
-+#define EF_PARISC_TRAPNIL 0x00010000 /* Trap nil pointer dereference. */
-+#define EF_PARISC_EXT 0x00020000 /* Program uses arch. extensions. */
-+#define EF_PARISC_LSB 0x00040000 /* Program expects little endian. */
-+#define EF_PARISC_WIDE 0x00080000 /* Program expects wide mode. */
-+#define EF_PARISC_NO_KABP 0x00100000 /* No kernel assisted branch
-+ prediction. */
-+#define EF_PARISC_LAZYSWAP 0x00400000 /* Allow lazy swapping. */
-+#define EF_PARISC_ARCH 0x0000ffff /* Architecture version. */
-+
-+/* Defined values for `e_flags & EF_PARISC_ARCH' are: */
-+
-+#define EFA_PARISC_1_0 0x020b /* PA-RISC 1.0 big-endian. */
-+#define EFA_PARISC_1_1 0x0210 /* PA-RISC 1.1 big-endian. */
-+#define EFA_PARISC_2_0 0x0214 /* PA-RISC 2.0 big-endian. */
-+
-+/* Additional section indeces. */
-+
-+#define SHN_PARISC_ANSI_COMMON 0xff00 /* Section for tenatively declared
-+ symbols in ANSI C. */
-+#define SHN_PARISC_HUGE_COMMON 0xff01 /* Common blocks in huge model. */
-+
-+/* Legal values for sh_type field of Elf32_Shdr. */
-+
-+#define SHT_PARISC_EXT 0x70000000 /* Contains product specific ext. */
-+#define SHT_PARISC_UNWIND 0x70000001 /* Unwind information. */
-+#define SHT_PARISC_DOC 0x70000002 /* Debug info for optimized code. */
-+
-+/* Legal values for sh_flags field of Elf32_Shdr. */
-+
-+#define SHF_PARISC_SHORT 0x20000000 /* Section with short addressing. */
-+#define SHF_PARISC_HUGE 0x40000000 /* Section far from gp. */
-+#define SHF_PARISC_SBP 0x80000000 /* Static branch prediction code. */
-+
-+/* Legal values for ST_TYPE subfield of st_info (symbol type). */
-+
-+#define STT_PARISC_MILLICODE 13 /* Millicode function entry point. */
-+
-+#define STT_HP_OPAQUE (STT_LOOS + 0x1)
-+#define STT_HP_STUB (STT_LOOS + 0x2)
-+
-+/* HPPA relocs. */
-+
-+#define R_PARISC_NONE 0 /* No reloc. */
-+#define R_PARISC_DIR32 1 /* Direct 32-bit reference. */
-+#define R_PARISC_DIR21L 2 /* Left 21 bits of eff. address. */
-+#define R_PARISC_DIR17R 3 /* Right 17 bits of eff. address. */
-+#define R_PARISC_DIR17F 4 /* 17 bits of eff. address. */
-+#define R_PARISC_DIR14R 6 /* Right 14 bits of eff. address. */
-+#define R_PARISC_PCREL32 9 /* 32-bit rel. address. */
-+#define R_PARISC_PCREL21L 10 /* Left 21 bits of rel. address. */
-+#define R_PARISC_PCREL17R 11 /* Right 17 bits of rel. address. */
-+#define R_PARISC_PCREL17F 12 /* 17 bits of rel. address. */
-+#define R_PARISC_PCREL14R 14 /* Right 14 bits of rel. address. */
-+#define R_PARISC_DPREL21L 18 /* Left 21 bits of rel. address. */
-+#define R_PARISC_DPREL14R 22 /* Right 14 bits of rel. address. */
-+#define R_PARISC_GPREL21L 26 /* GP-relative, left 21 bits. */
-+#define R_PARISC_GPREL14R 30 /* GP-relative, right 14 bits. */
-+#define R_PARISC_LTOFF21L 34 /* LT-relative, left 21 bits. */
-+#define R_PARISC_LTOFF14R 38 /* LT-relative, right 14 bits. */
-+#define R_PARISC_SECREL32 41 /* 32 bits section rel. address. */
-+#define R_PARISC_SEGBASE 48 /* No relocation, set segment base. */
-+#define R_PARISC_SEGREL32 49 /* 32 bits segment rel. address. */
-+#define R_PARISC_PLTOFF21L 50 /* PLT rel. address, left 21 bits. */
-+#define R_PARISC_PLTOFF14R 54 /* PLT rel. address, right 14 bits. */
-+#define R_PARISC_LTOFF_FPTR32 57 /* 32 bits LT-rel. function pointer. */
-+#define R_PARISC_LTOFF_FPTR21L 58 /* LT-rel. fct ptr, left 21 bits. */
-+#define R_PARISC_LTOFF_FPTR14R 62 /* LT-rel. fct ptr, right 14 bits. */
-+#define R_PARISC_FPTR64 64 /* 64 bits function address. */
-+#define R_PARISC_PLABEL32 65 /* 32 bits function address. */
-+#define R_PARISC_PLABEL21L 66 /* Left 21 bits of fdesc address. */
-+#define R_PARISC_PLABEL14R 70 /* Right 14 bits of fdesc address. */
-+#define R_PARISC_PCREL64 72 /* 64 bits PC-rel. address. */
-+#define R_PARISC_PCREL22F 74 /* 22 bits PC-rel. address. */
-+#define R_PARISC_PCREL14WR 75 /* PC-rel. address, right 14 bits. */
-+#define R_PARISC_PCREL14DR 76 /* PC rel. address, right 14 bits. */
-+#define R_PARISC_PCREL16F 77 /* 16 bits PC-rel. address. */
-+#define R_PARISC_PCREL16WF 78 /* 16 bits PC-rel. address. */
-+#define R_PARISC_PCREL16DF 79 /* 16 bits PC-rel. address. */
-+#define R_PARISC_DIR64 80 /* 64 bits of eff. address. */
-+#define R_PARISC_DIR14WR 83 /* 14 bits of eff. address. */
-+#define R_PARISC_DIR14DR 84 /* 14 bits of eff. address. */
-+#define R_PARISC_DIR16F 85 /* 16 bits of eff. address. */
-+#define R_PARISC_DIR16WF 86 /* 16 bits of eff. address. */
-+#define R_PARISC_DIR16DF 87 /* 16 bits of eff. address. */
-+#define R_PARISC_GPREL64 88 /* 64 bits of GP-rel. address. */
-+#define R_PARISC_GPREL14WR 91 /* GP-rel. address, right 14 bits. */
-+#define R_PARISC_GPREL14DR 92 /* GP-rel. address, right 14 bits. */
-+#define R_PARISC_GPREL16F 93 /* 16 bits GP-rel. address. */
-+#define R_PARISC_GPREL16WF 94 /* 16 bits GP-rel. address. */
-+#define R_PARISC_GPREL16DF 95 /* 16 bits GP-rel. address. */
-+#define R_PARISC_LTOFF64 96 /* 64 bits LT-rel. address. */
-+#define R_PARISC_LTOFF14WR 99 /* LT-rel. address, right 14 bits. */
-+#define R_PARISC_LTOFF14DR 100 /* LT-rel. address, right 14 bits. */
-+#define R_PARISC_LTOFF16F 101 /* 16 bits LT-rel. address. */
-+#define R_PARISC_LTOFF16WF 102 /* 16 bits LT-rel. address. */
-+#define R_PARISC_LTOFF16DF 103 /* 16 bits LT-rel. address. */
-+#define R_PARISC_SECREL64 104 /* 64 bits section rel. address. */
-+#define R_PARISC_SEGREL64 112 /* 64 bits segment rel. address. */
-+#define R_PARISC_PLTOFF14WR 115 /* PLT-rel. address, right 14 bits. */
-+#define R_PARISC_PLTOFF14DR 116 /* PLT-rel. address, right 14 bits. */
-+#define R_PARISC_PLTOFF16F 117 /* 16 bits LT-rel. address. */
-+#define R_PARISC_PLTOFF16WF 118 /* 16 bits PLT-rel. address. */
-+#define R_PARISC_PLTOFF16DF 119 /* 16 bits PLT-rel. address. */
-+#define R_PARISC_LTOFF_FPTR64 120 /* 64 bits LT-rel. function ptr. */
-+#define R_PARISC_LTOFF_FPTR14WR 123 /* LT-rel. fct. ptr., right 14 bits. */
-+#define R_PARISC_LTOFF_FPTR14DR 124 /* LT-rel. fct. ptr., right 14 bits. */
-+#define R_PARISC_LTOFF_FPTR16F 125 /* 16 bits LT-rel. function ptr. */
-+#define R_PARISC_LTOFF_FPTR16WF 126 /* 16 bits LT-rel. function ptr. */
-+#define R_PARISC_LTOFF_FPTR16DF 127 /* 16 bits LT-rel. function ptr. */
-+#define R_PARISC_LORESERVE 128
-+#define R_PARISC_COPY 128 /* Copy relocation. */
-+#define R_PARISC_IPLT 129 /* Dynamic reloc, imported PLT */
-+#define R_PARISC_EPLT 130 /* Dynamic reloc, exported PLT */
-+#define R_PARISC_TPREL32 153 /* 32 bits TP-rel. address. */
-+#define R_PARISC_TPREL21L 154 /* TP-rel. address, left 21 bits. */
-+#define R_PARISC_TPREL14R 158 /* TP-rel. address, right 14 bits. */
-+#define R_PARISC_LTOFF_TP21L 162 /* LT-TP-rel. address, left 21 bits. */
-+#define R_PARISC_LTOFF_TP14R 166 /* LT-TP-rel. address, right 14 bits.*/
-+#define R_PARISC_LTOFF_TP14F 167 /* 14 bits LT-TP-rel. address. */
-+#define R_PARISC_TPREL64 216 /* 64 bits TP-rel. address. */
-+#define R_PARISC_TPREL14WR 219 /* TP-rel. address, right 14 bits. */
-+#define R_PARISC_TPREL14DR 220 /* TP-rel. address, right 14 bits. */
-+#define R_PARISC_TPREL16F 221 /* 16 bits TP-rel. address. */
-+#define R_PARISC_TPREL16WF 222 /* 16 bits TP-rel. address. */
-+#define R_PARISC_TPREL16DF 223 /* 16 bits TP-rel. address. */
-+#define R_PARISC_LTOFF_TP64 224 /* 64 bits LT-TP-rel. address. */
-+#define R_PARISC_LTOFF_TP14WR 227 /* LT-TP-rel. address, right 14 bits.*/
-+#define R_PARISC_LTOFF_TP14DR 228 /* LT-TP-rel. address, right 14 bits.*/
-+#define R_PARISC_LTOFF_TP16F 229 /* 16 bits LT-TP-rel. address. */
-+#define R_PARISC_LTOFF_TP16WF 230 /* 16 bits LT-TP-rel. address. */
-+#define R_PARISC_LTOFF_TP16DF 231 /* 16 bits LT-TP-rel. address. */
-+#define R_PARISC_GNU_VTENTRY 232
-+#define R_PARISC_GNU_VTINHERIT 233
-+#define R_PARISC_TLS_GD21L 234 /* GD 21-bit left. */
-+#define R_PARISC_TLS_GD14R 235 /* GD 14-bit right. */
-+#define R_PARISC_TLS_GDCALL 236 /* GD call to __t_g_a. */
-+#define R_PARISC_TLS_LDM21L 237 /* LD module 21-bit left. */
-+#define R_PARISC_TLS_LDM14R 238 /* LD module 14-bit right. */
-+#define R_PARISC_TLS_LDMCALL 239 /* LD module call to __t_g_a. */
-+#define R_PARISC_TLS_LDO21L 240 /* LD offset 21-bit left. */
-+#define R_PARISC_TLS_LDO14R 241 /* LD offset 14-bit right. */
-+#define R_PARISC_TLS_DTPMOD32 242 /* DTP module 32-bit. */
-+#define R_PARISC_TLS_DTPMOD64 243 /* DTP module 64-bit. */
-+#define R_PARISC_TLS_DTPOFF32 244 /* DTP offset 32-bit. */
-+#define R_PARISC_TLS_DTPOFF64 245 /* DTP offset 32-bit. */
-+#define R_PARISC_TLS_LE21L R_PARISC_TPREL21L
-+#define R_PARISC_TLS_LE14R R_PARISC_TPREL14R
-+#define R_PARISC_TLS_IE21L R_PARISC_LTOFF_TP21L
-+#define R_PARISC_TLS_IE14R R_PARISC_LTOFF_TP14R
-+#define R_PARISC_TLS_TPREL32 R_PARISC_TPREL32
-+#define R_PARISC_TLS_TPREL64 R_PARISC_TPREL64
-+#define R_PARISC_HIRESERVE 255
-+
-+/* Legal values for p_type field of Elf32_Phdr/Elf64_Phdr. */
-+
-+#define PT_HP_TLS (PT_LOOS + 0x0)
-+#define PT_HP_CORE_NONE (PT_LOOS + 0x1)
-+#define PT_HP_CORE_VERSION (PT_LOOS + 0x2)
-+#define PT_HP_CORE_KERNEL (PT_LOOS + 0x3)
-+#define PT_HP_CORE_COMM (PT_LOOS + 0x4)
-+#define PT_HP_CORE_PROC (PT_LOOS + 0x5)
-+#define PT_HP_CORE_LOADABLE (PT_LOOS + 0x6)
-+#define PT_HP_CORE_STACK (PT_LOOS + 0x7)
-+#define PT_HP_CORE_SHM (PT_LOOS + 0x8)
-+#define PT_HP_CORE_MMF (PT_LOOS + 0x9)
-+#define PT_HP_PARALLEL (PT_LOOS + 0x10)
-+#define PT_HP_FASTBIND (PT_LOOS + 0x11)
-+#define PT_HP_OPT_ANNOT (PT_LOOS + 0x12)
-+#define PT_HP_HSL_ANNOT (PT_LOOS + 0x13)
-+#define PT_HP_STACK (PT_LOOS + 0x14)
-+
-+#define PT_PARISC_ARCHEXT 0x70000000
-+#define PT_PARISC_UNWIND 0x70000001
-+
-+/* Legal values for p_flags field of Elf32_Phdr/Elf64_Phdr. */
-+
-+#define PF_PARISC_SBP 0x08000000
-+
-+#define PF_HP_PAGE_SIZE 0x00100000
-+#define PF_HP_FAR_SHARED 0x00200000
-+#define PF_HP_NEAR_SHARED 0x00400000
-+#define PF_HP_CODE 0x01000000
-+#define PF_HP_MODIFY 0x02000000
-+#define PF_HP_LAZYSWAP 0x04000000
-+#define PF_HP_SBP 0x08000000
-+
-+
-+/* Alpha specific definitions. */
-+
-+/* Legal values for e_flags field of Elf64_Ehdr. */
-+
-+#define EF_ALPHA_32BIT 1 /* All addresses must be < 2GB. */
-+#define EF_ALPHA_CANRELAX 2 /* Relocations for relaxing exist. */
-+
-+/* Legal values for sh_type field of Elf64_Shdr. */
-+
-+/* These two are primerily concerned with ECOFF debugging info. */
-+#define SHT_ALPHA_DEBUG 0x70000001
-+#define SHT_ALPHA_REGINFO 0x70000002
-+
-+/* Legal values for sh_flags field of Elf64_Shdr. */
-+
-+#define SHF_ALPHA_GPREL 0x10000000
-+
-+/* Legal values for st_other field of Elf64_Sym. */
-+#define STO_ALPHA_NOPV 0x80 /* No PV required. */
-+#define STO_ALPHA_STD_GPLOAD 0x88 /* PV only used for initial ldgp. */
-+
-+/* Alpha relocs. */
-+
-+#define R_ALPHA_NONE 0 /* No reloc */
-+#define R_ALPHA_REFLONG 1 /* Direct 32 bit */
-+#define R_ALPHA_REFQUAD 2 /* Direct 64 bit */
-+#define R_ALPHA_GPREL32 3 /* GP relative 32 bit */
-+#define R_ALPHA_LITERAL 4 /* GP relative 16 bit w/optimization */
-+#define R_ALPHA_LITUSE 5 /* Optimization hint for LITERAL */
-+#define R_ALPHA_GPDISP 6 /* Add displacement to GP */
-+#define R_ALPHA_BRADDR 7 /* PC+4 relative 23 bit shifted */
-+#define R_ALPHA_HINT 8 /* PC+4 relative 16 bit shifted */
-+#define R_ALPHA_SREL16 9 /* PC relative 16 bit */
-+#define R_ALPHA_SREL32 10 /* PC relative 32 bit */
-+#define R_ALPHA_SREL64 11 /* PC relative 64 bit */
-+#define R_ALPHA_GPRELHIGH 17 /* GP relative 32 bit, high 16 bits */
-+#define R_ALPHA_GPRELLOW 18 /* GP relative 32 bit, low 16 bits */
-+#define R_ALPHA_GPREL16 19 /* GP relative 16 bit */
-+#define R_ALPHA_COPY 24 /* Copy symbol at runtime */
-+#define R_ALPHA_GLOB_DAT 25 /* Create GOT entry */
-+#define R_ALPHA_JMP_SLOT 26 /* Create PLT entry */
-+#define R_ALPHA_RELATIVE 27 /* Adjust by program base */
-+#define R_ALPHA_TLS_GD_HI 28
-+#define R_ALPHA_TLSGD 29
-+#define R_ALPHA_TLS_LDM 30
-+#define R_ALPHA_DTPMOD64 31
-+#define R_ALPHA_GOTDTPREL 32
-+#define R_ALPHA_DTPREL64 33
-+#define R_ALPHA_DTPRELHI 34
-+#define R_ALPHA_DTPRELLO 35
-+#define R_ALPHA_DTPREL16 36
-+#define R_ALPHA_GOTTPREL 37
-+#define R_ALPHA_TPREL64 38
-+#define R_ALPHA_TPRELHI 39
-+#define R_ALPHA_TPRELLO 40
-+#define R_ALPHA_TPREL16 41
-+/* Keep this the last entry. */
-+#define R_ALPHA_NUM 46
-+
-+/* Magic values of the LITUSE relocation addend. */
-+#define LITUSE_ALPHA_ADDR 0
-+#define LITUSE_ALPHA_BASE 1
-+#define LITUSE_ALPHA_BYTOFF 2
-+#define LITUSE_ALPHA_JSR 3
-+#define LITUSE_ALPHA_TLS_GD 4
-+#define LITUSE_ALPHA_TLS_LDM 5
-+
-+/* Legal values for d_tag of Elf64_Dyn. */
-+#define DT_ALPHA_PLTRO (DT_LOPROC + 0)
-+#define DT_ALPHA_NUM 1
-+
-+/* PowerPC specific declarations */
-+
-+/* Values for Elf32/64_Ehdr.e_flags. */
-+#define EF_PPC_EMB 0x80000000 /* PowerPC embedded flag */
-+
-+/* Cygnus local bits below */
-+#define EF_PPC_RELOCATABLE 0x00010000 /* PowerPC -mrelocatable flag*/
-+#define EF_PPC_RELOCATABLE_LIB 0x00008000 /* PowerPC -mrelocatable-lib
-+ flag */
-+
-+/* PowerPC relocations defined by the ABIs */
-+#define R_PPC_NONE 0
-+#define R_PPC_ADDR32 1 /* 32bit absolute address */
-+#define R_PPC_ADDR24 2 /* 26bit address, 2 bits ignored. */
-+#define R_PPC_ADDR16 3 /* 16bit absolute address */
-+#define R_PPC_ADDR16_LO 4 /* lower 16bit of absolute address */
-+#define R_PPC_ADDR16_HI 5 /* high 16bit of absolute address */
-+#define R_PPC_ADDR16_HA 6 /* adjusted high 16bit */
-+#define R_PPC_ADDR14 7 /* 16bit address, 2 bits ignored */
-+#define R_PPC_ADDR14_BRTAKEN 8
-+#define R_PPC_ADDR14_BRNTAKEN 9
-+#define R_PPC_REL24 10 /* PC relative 26 bit */
-+#define R_PPC_REL14 11 /* PC relative 16 bit */
-+#define R_PPC_REL14_BRTAKEN 12
-+#define R_PPC_REL14_BRNTAKEN 13
-+#define R_PPC_GOT16 14
-+#define R_PPC_GOT16_LO 15
-+#define R_PPC_GOT16_HI 16
-+#define R_PPC_GOT16_HA 17
-+#define R_PPC_PLTREL24 18
-+#define R_PPC_COPY 19
-+#define R_PPC_GLOB_DAT 20
-+#define R_PPC_JMP_SLOT 21
-+#define R_PPC_RELATIVE 22
-+#define R_PPC_LOCAL24PC 23
-+#define R_PPC_UADDR32 24
-+#define R_PPC_UADDR16 25
-+#define R_PPC_REL32 26
-+#define R_PPC_PLT32 27
-+#define R_PPC_PLTREL32 28
-+#define R_PPC_PLT16_LO 29
-+#define R_PPC_PLT16_HI 30
-+#define R_PPC_PLT16_HA 31
-+#define R_PPC_SDAREL16 32
-+#define R_PPC_SECTOFF 33
-+#define R_PPC_SECTOFF_LO 34
-+#define R_PPC_SECTOFF_HI 35
-+#define R_PPC_SECTOFF_HA 36
-+
-+/* PowerPC relocations defined for the TLS access ABI. */
-+#define R_PPC_TLS 67 /* none (sym+add)@tls */
-+#define R_PPC_DTPMOD32 68 /* word32 (sym+add)@dtpmod */
-+#define R_PPC_TPREL16 69 /* half16* (sym+add)@tprel */
-+#define R_PPC_TPREL16_LO 70 /* half16 (sym+add)@tprel@l */
-+#define R_PPC_TPREL16_HI 71 /* half16 (sym+add)@tprel@h */
-+#define R_PPC_TPREL16_HA 72 /* half16 (sym+add)@tprel@ha */
-+#define R_PPC_TPREL32 73 /* word32 (sym+add)@tprel */
-+#define R_PPC_DTPREL16 74 /* half16* (sym+add)@dtprel */
-+#define R_PPC_DTPREL16_LO 75 /* half16 (sym+add)@dtprel@l */
-+#define R_PPC_DTPREL16_HI 76 /* half16 (sym+add)@dtprel@h */
-+#define R_PPC_DTPREL16_HA 77 /* half16 (sym+add)@dtprel@ha */
-+#define R_PPC_DTPREL32 78 /* word32 (sym+add)@dtprel */
-+#define R_PPC_GOT_TLSGD16 79 /* half16* (sym+add)@got@tlsgd */
-+#define R_PPC_GOT_TLSGD16_LO 80 /* half16 (sym+add)@got@tlsgd@l */
-+#define R_PPC_GOT_TLSGD16_HI 81 /* half16 (sym+add)@got@tlsgd@h */
-+#define R_PPC_GOT_TLSGD16_HA 82 /* half16 (sym+add)@got@tlsgd@ha */
-+#define R_PPC_GOT_TLSLD16 83 /* half16* (sym+add)@got@tlsld */
-+#define R_PPC_GOT_TLSLD16_LO 84 /* half16 (sym+add)@got@tlsld@l */
-+#define R_PPC_GOT_TLSLD16_HI 85 /* half16 (sym+add)@got@tlsld@h */
-+#define R_PPC_GOT_TLSLD16_HA 86 /* half16 (sym+add)@got@tlsld@ha */
-+#define R_PPC_GOT_TPREL16 87 /* half16* (sym+add)@got@tprel */
-+#define R_PPC_GOT_TPREL16_LO 88 /* half16 (sym+add)@got@tprel@l */
-+#define R_PPC_GOT_TPREL16_HI 89 /* half16 (sym+add)@got@tprel@h */
-+#define R_PPC_GOT_TPREL16_HA 90 /* half16 (sym+add)@got@tprel@ha */
-+#define R_PPC_GOT_DTPREL16 91 /* half16* (sym+add)@got@dtprel */
-+#define R_PPC_GOT_DTPREL16_LO 92 /* half16* (sym+add)@got@dtprel@l */
-+#define R_PPC_GOT_DTPREL16_HI 93 /* half16* (sym+add)@got@dtprel@h */
-+#define R_PPC_GOT_DTPREL16_HA 94 /* half16* (sym+add)@got@dtprel@ha */
-+
-+/* The remaining relocs are from the Embedded ELF ABI, and are not
-+ in the SVR4 ELF ABI. */
-+#define R_PPC_EMB_NADDR32 101
-+#define R_PPC_EMB_NADDR16 102
-+#define R_PPC_EMB_NADDR16_LO 103
-+#define R_PPC_EMB_NADDR16_HI 104
-+#define R_PPC_EMB_NADDR16_HA 105
-+#define R_PPC_EMB_SDAI16 106
-+#define R_PPC_EMB_SDA2I16 107
-+#define R_PPC_EMB_SDA2REL 108
-+#define R_PPC_EMB_SDA21 109 /* 16 bit offset in SDA */
-+#define R_PPC_EMB_MRKREF 110
-+#define R_PPC_EMB_RELSEC16 111
-+#define R_PPC_EMB_RELST_LO 112
-+#define R_PPC_EMB_RELST_HI 113
-+#define R_PPC_EMB_RELST_HA 114
-+#define R_PPC_EMB_BIT_FLD 115
-+#define R_PPC_EMB_RELSDA 116 /* 16 bit relative offset in SDA */
-+
-+/* Diab tool relocations. */
-+#define R_PPC_DIAB_SDA21_LO 180 /* like EMB_SDA21, but lower 16 bit */
-+#define R_PPC_DIAB_SDA21_HI 181 /* like EMB_SDA21, but high 16 bit */
-+#define R_PPC_DIAB_SDA21_HA 182 /* like EMB_SDA21, adjusted high 16 */
-+#define R_PPC_DIAB_RELSDA_LO 183 /* like EMB_RELSDA, but lower 16 bit */
-+#define R_PPC_DIAB_RELSDA_HI 184 /* like EMB_RELSDA, but high 16 bit */
-+#define R_PPC_DIAB_RELSDA_HA 185 /* like EMB_RELSDA, adjusted high 16 */
-+
-+/* GNU extension to support local ifunc. */
-+#define R_PPC_IRELATIVE 248
-+
-+/* GNU relocs used in PIC code sequences. */
-+#define R_PPC_REL16 249 /* half16 (sym+add-.) */
-+#define R_PPC_REL16_LO 250 /* half16 (sym+add-.)@l */
-+#define R_PPC_REL16_HI 251 /* half16 (sym+add-.)@h */
-+#define R_PPC_REL16_HA 252 /* half16 (sym+add-.)@ha */
-+
-+/* This is a phony reloc to handle any old fashioned TOC16 references
-+ that may still be in object files. */
-+#define R_PPC_TOC16 255
-+
-+/* PowerPC specific values for the Dyn d_tag field. */
-+#define DT_PPC_GOT (DT_LOPROC + 0)
-+#define DT_PPC_NUM 1
-+
-+/* PowerPC64 relocations defined by the ABIs */
-+#define R_PPC64_NONE R_PPC_NONE
-+#define R_PPC64_ADDR32 R_PPC_ADDR32 /* 32bit absolute address */
-+#define R_PPC64_ADDR24 R_PPC_ADDR24 /* 26bit address, word aligned */
-+#define R_PPC64_ADDR16 R_PPC_ADDR16 /* 16bit absolute address */
-+#define R_PPC64_ADDR16_LO R_PPC_ADDR16_LO /* lower 16bits of address */
-+#define R_PPC64_ADDR16_HI R_PPC_ADDR16_HI /* high 16bits of address. */
-+#define R_PPC64_ADDR16_HA R_PPC_ADDR16_HA /* adjusted high 16bits. */
-+#define R_PPC64_ADDR14 R_PPC_ADDR14 /* 16bit address, word aligned */
-+#define R_PPC64_ADDR14_BRTAKEN R_PPC_ADDR14_BRTAKEN
-+#define R_PPC64_ADDR14_BRNTAKEN R_PPC_ADDR14_BRNTAKEN
-+#define R_PPC64_REL24 R_PPC_REL24 /* PC-rel. 26 bit, word aligned */
-+#define R_PPC64_REL14 R_PPC_REL14 /* PC relative 16 bit */
-+#define R_PPC64_REL14_BRTAKEN R_PPC_REL14_BRTAKEN
-+#define R_PPC64_REL14_BRNTAKEN R_PPC_REL14_BRNTAKEN
-+#define R_PPC64_GOT16 R_PPC_GOT16
-+#define R_PPC64_GOT16_LO R_PPC_GOT16_LO
-+#define R_PPC64_GOT16_HI R_PPC_GOT16_HI
-+#define R_PPC64_GOT16_HA R_PPC_GOT16_HA
-+
-+#define R_PPC64_COPY R_PPC_COPY
-+#define R_PPC64_GLOB_DAT R_PPC_GLOB_DAT
-+#define R_PPC64_JMP_SLOT R_PPC_JMP_SLOT
-+#define R_PPC64_RELATIVE R_PPC_RELATIVE
-+
-+#define R_PPC64_UADDR32 R_PPC_UADDR32
-+#define R_PPC64_UADDR16 R_PPC_UADDR16
-+#define R_PPC64_REL32 R_PPC_REL32
-+#define R_PPC64_PLT32 R_PPC_PLT32
-+#define R_PPC64_PLTREL32 R_PPC_PLTREL32
-+#define R_PPC64_PLT16_LO R_PPC_PLT16_LO
-+#define R_PPC64_PLT16_HI R_PPC_PLT16_HI
-+#define R_PPC64_PLT16_HA R_PPC_PLT16_HA
-+
-+#define R_PPC64_SECTOFF R_PPC_SECTOFF
-+#define R_PPC64_SECTOFF_LO R_PPC_SECTOFF_LO
-+#define R_PPC64_SECTOFF_HI R_PPC_SECTOFF_HI
-+#define R_PPC64_SECTOFF_HA R_PPC_SECTOFF_HA
-+#define R_PPC64_ADDR30 37 /* word30 (S + A - P) >> 2 */
-+#define R_PPC64_ADDR64 38 /* doubleword64 S + A */
-+#define R_PPC64_ADDR16_HIGHER 39 /* half16 #higher(S + A) */
-+#define R_PPC64_ADDR16_HIGHERA 40 /* half16 #highera(S + A) */
-+#define R_PPC64_ADDR16_HIGHEST 41 /* half16 #highest(S + A) */
-+#define R_PPC64_ADDR16_HIGHESTA 42 /* half16 #highesta(S + A) */
-+#define R_PPC64_UADDR64 43 /* doubleword64 S + A */
-+#define R_PPC64_REL64 44 /* doubleword64 S + A - P */
-+#define R_PPC64_PLT64 45 /* doubleword64 L + A */
-+#define R_PPC64_PLTREL64 46 /* doubleword64 L + A - P */
-+#define R_PPC64_TOC16 47 /* half16* S + A - .TOC */
-+#define R_PPC64_TOC16_LO 48 /* half16 #lo(S + A - .TOC.) */
-+#define R_PPC64_TOC16_HI 49 /* half16 #hi(S + A - .TOC.) */
-+#define R_PPC64_TOC16_HA 50 /* half16 #ha(S + A - .TOC.) */
-+#define R_PPC64_TOC 51 /* doubleword64 .TOC */
-+#define R_PPC64_PLTGOT16 52 /* half16* M + A */
-+#define R_PPC64_PLTGOT16_LO 53 /* half16 #lo(M + A) */
-+#define R_PPC64_PLTGOT16_HI 54 /* half16 #hi(M + A) */
-+#define R_PPC64_PLTGOT16_HA 55 /* half16 #ha(M + A) */
-+
-+#define R_PPC64_ADDR16_DS 56 /* half16ds* (S + A) >> 2 */
-+#define R_PPC64_ADDR16_LO_DS 57 /* half16ds #lo(S + A) >> 2 */
-+#define R_PPC64_GOT16_DS 58 /* half16ds* (G + A) >> 2 */
-+#define R_PPC64_GOT16_LO_DS 59 /* half16ds #lo(G + A) >> 2 */
-+#define R_PPC64_PLT16_LO_DS 60 /* half16ds #lo(L + A) >> 2 */
-+#define R_PPC64_SECTOFF_DS 61 /* half16ds* (R + A) >> 2 */
-+#define R_PPC64_SECTOFF_LO_DS 62 /* half16ds #lo(R + A) >> 2 */
-+#define R_PPC64_TOC16_DS 63 /* half16ds* (S + A - .TOC.) >> 2 */
-+#define R_PPC64_TOC16_LO_DS 64 /* half16ds #lo(S + A - .TOC.) >> 2 */
-+#define R_PPC64_PLTGOT16_DS 65 /* half16ds* (M + A) >> 2 */
-+#define R_PPC64_PLTGOT16_LO_DS 66 /* half16ds #lo(M + A) >> 2 */
-+
-+/* PowerPC64 relocations defined for the TLS access ABI. */
-+#define R_PPC64_TLS 67 /* none (sym+add)@tls */
-+#define R_PPC64_DTPMOD64 68 /* doubleword64 (sym+add)@dtpmod */
-+#define R_PPC64_TPREL16 69 /* half16* (sym+add)@tprel */
-+#define R_PPC64_TPREL16_LO 70 /* half16 (sym+add)@tprel@l */
-+#define R_PPC64_TPREL16_HI 71 /* half16 (sym+add)@tprel@h */
-+#define R_PPC64_TPREL16_HA 72 /* half16 (sym+add)@tprel@ha */
-+#define R_PPC64_TPREL64 73 /* doubleword64 (sym+add)@tprel */
-+#define R_PPC64_DTPREL16 74 /* half16* (sym+add)@dtprel */
-+#define R_PPC64_DTPREL16_LO 75 /* half16 (sym+add)@dtprel@l */
-+#define R_PPC64_DTPREL16_HI 76 /* half16 (sym+add)@dtprel@h */
-+#define R_PPC64_DTPREL16_HA 77 /* half16 (sym+add)@dtprel@ha */
-+#define R_PPC64_DTPREL64 78 /* doubleword64 (sym+add)@dtprel */
-+#define R_PPC64_GOT_TLSGD16 79 /* half16* (sym+add)@got@tlsgd */
-+#define R_PPC64_GOT_TLSGD16_LO 80 /* half16 (sym+add)@got@tlsgd@l */
-+#define R_PPC64_GOT_TLSGD16_HI 81 /* half16 (sym+add)@got@tlsgd@h */
-+#define R_PPC64_GOT_TLSGD16_HA 82 /* half16 (sym+add)@got@tlsgd@ha */
-+#define R_PPC64_GOT_TLSLD16 83 /* half16* (sym+add)@got@tlsld */
-+#define R_PPC64_GOT_TLSLD16_LO 84 /* half16 (sym+add)@got@tlsld@l */
-+#define R_PPC64_GOT_TLSLD16_HI 85 /* half16 (sym+add)@got@tlsld@h */
-+#define R_PPC64_GOT_TLSLD16_HA 86 /* half16 (sym+add)@got@tlsld@ha */
-+#define R_PPC64_GOT_TPREL16_DS 87 /* half16ds* (sym+add)@got@tprel */
-+#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */
-+#define R_PPC64_GOT_TPREL16_HI 89 /* half16 (sym+add)@got@tprel@h */
-+#define R_PPC64_GOT_TPREL16_HA 90 /* half16 (sym+add)@got@tprel@ha */
-+#define R_PPC64_GOT_DTPREL16_DS 91 /* half16ds* (sym+add)@got@dtprel */
-+#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */
-+#define R_PPC64_GOT_DTPREL16_HI 93 /* half16 (sym+add)@got@dtprel@h */
-+#define R_PPC64_GOT_DTPREL16_HA 94 /* half16 (sym+add)@got@dtprel@ha */
-+#define R_PPC64_TPREL16_DS 95 /* half16ds* (sym+add)@tprel */
-+#define R_PPC64_TPREL16_LO_DS 96 /* half16ds (sym+add)@tprel@l */
-+#define R_PPC64_TPREL16_HIGHER 97 /* half16 (sym+add)@tprel@higher */
-+#define R_PPC64_TPREL16_HIGHERA 98 /* half16 (sym+add)@tprel@highera */
-+#define R_PPC64_TPREL16_HIGHEST 99 /* half16 (sym+add)@tprel@highest */
-+#define R_PPC64_TPREL16_HIGHESTA 100 /* half16 (sym+add)@tprel@highesta */
-+#define R_PPC64_DTPREL16_DS 101 /* half16ds* (sym+add)@dtprel */
-+#define R_PPC64_DTPREL16_LO_DS 102 /* half16ds (sym+add)@dtprel@l */
-+#define R_PPC64_DTPREL16_HIGHER 103 /* half16 (sym+add)@dtprel@higher */
-+#define R_PPC64_DTPREL16_HIGHERA 104 /* half16 (sym+add)@dtprel@highera */
-+#define R_PPC64_DTPREL16_HIGHEST 105 /* half16 (sym+add)@dtprel@highest */
-+#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16 (sym+add)@dtprel@highesta */
-+
-+/* GNU extension to support local ifunc. */
-+#define R_PPC64_JMP_IREL 247
-+#define R_PPC64_IRELATIVE 248
-+#define R_PPC64_REL16 249 /* half16 (sym+add-.) */
-+#define R_PPC64_REL16_LO 250 /* half16 (sym+add-.)@l */
-+#define R_PPC64_REL16_HI 251 /* half16 (sym+add-.)@h */
-+#define R_PPC64_REL16_HA 252 /* half16 (sym+add-.)@ha */
-+
-+/* PowerPC64 specific values for the Dyn d_tag field. */
-+#define DT_PPC64_GLINK (DT_LOPROC + 0)
-+#define DT_PPC64_OPD (DT_LOPROC + 1)
-+#define DT_PPC64_OPDSZ (DT_LOPROC + 2)
-+#define DT_PPC64_NUM 3
-+
-+
-+/* ARM specific declarations */
-+
-+/* Processor specific flags for the ELF header e_flags field. */
-+#define EF_ARM_RELEXEC 0x01
-+#define EF_ARM_HASENTRY 0x02
-+#define EF_ARM_INTERWORK 0x04
-+#define EF_ARM_APCS_26 0x08
-+#define EF_ARM_APCS_FLOAT 0x10
-+#define EF_ARM_PIC 0x20
-+#define EF_ARM_ALIGN8 0x40 /* 8-bit structure alignment is in use */
-+#define EF_ARM_NEW_ABI 0x80
-+#define EF_ARM_OLD_ABI 0x100
-+#define EF_ARM_SOFT_FLOAT 0x200
-+#define EF_ARM_VFP_FLOAT 0x400
-+#define EF_ARM_MAVERICK_FLOAT 0x800
-+
-+
-+/* Other constants defined in the ARM ELF spec. version B-01. */
-+/* NB. These conflict with values defined above. */
-+#define EF_ARM_SYMSARESORTED 0x04
-+#define EF_ARM_DYNSYMSUSESEGIDX 0x08
-+#define EF_ARM_MAPSYMSFIRST 0x10
-+#define EF_ARM_EABIMASK 0XFF000000
-+
-+/* Constants defined in AAELF. */
-+#define EF_ARM_BE8 0x00800000
-+#define EF_ARM_LE8 0x00400000
-+
-+#define EF_ARM_EABI_VERSION(flags) ((flags) & EF_ARM_EABIMASK)
-+#define EF_ARM_EABI_UNKNOWN 0x00000000
-+#define EF_ARM_EABI_VER1 0x01000000
-+#define EF_ARM_EABI_VER2 0x02000000
-+#define EF_ARM_EABI_VER3 0x03000000
-+#define EF_ARM_EABI_VER4 0x04000000
-+#define EF_ARM_EABI_VER5 0x05000000
-+
-+/* Additional symbol types for Thumb. */
-+#define STT_ARM_TFUNC STT_LOPROC /* A Thumb function. */
-+#define STT_ARM_16BIT STT_HIPROC /* A Thumb label. */
-+
-+/* ARM-specific values for sh_flags */
-+#define SHF_ARM_ENTRYSECT 0x10000000 /* Section contains an entry point */
-+#define SHF_ARM_COMDEF 0x80000000 /* Section may be multiply defined
-+ in the input to a link step. */
-+
-+/* ARM-specific program header flags */
-+#define PF_ARM_SB 0x10000000 /* Segment contains the location
-+ addressed by the static base. */
-+#define PF_ARM_PI 0x20000000 /* Position-independent segment. */
-+#define PF_ARM_ABS 0x40000000 /* Absolute segment. */
-+
-+/* Processor specific values for the Phdr p_type field. */
-+#define PT_ARM_EXIDX (PT_LOPROC + 1) /* ARM unwind segment. */
-+
-+/* Processor specific values for the Shdr sh_type field. */
-+#define SHT_ARM_EXIDX (SHT_LOPROC + 1) /* ARM unwind section. */
-+#define SHT_ARM_PREEMPTMAP (SHT_LOPROC + 2) /* Preemption details. */
-+#define SHT_ARM_ATTRIBUTES (SHT_LOPROC + 3) /* ARM attributes section. */
-+
-+
-+/* ARM relocs. */
-+
-+#define R_ARM_NONE 0 /* No reloc */
-+#define R_ARM_PC24 1 /* PC relative 26 bit branch */
-+#define R_ARM_ABS32 2 /* Direct 32 bit */
-+#define R_ARM_REL32 3 /* PC relative 32 bit */
-+#define R_ARM_PC13 4
-+#define R_ARM_ABS16 5 /* Direct 16 bit */
-+#define R_ARM_ABS12 6 /* Direct 12 bit */
-+#define R_ARM_THM_ABS5 7
-+#define R_ARM_ABS8 8 /* Direct 8 bit */
-+#define R_ARM_SBREL32 9
-+#define R_ARM_THM_PC22 10
-+#define R_ARM_THM_PC8 11
-+#define R_ARM_AMP_VCALL9 12
-+#define R_ARM_SWI24 13 /* Obsolete static relocation. */
-+#define R_ARM_TLS_DESC 13 /* Dynamic relocation. */
-+#define R_ARM_THM_SWI8 14
-+#define R_ARM_XPC25 15
-+#define R_ARM_THM_XPC22 16
-+#define R_ARM_TLS_DTPMOD32 17 /* ID of module containing symbol */
-+#define R_ARM_TLS_DTPOFF32 18 /* Offset in TLS block */
-+#define R_ARM_TLS_TPOFF32 19 /* Offset in static TLS block */
-+#define R_ARM_COPY 20 /* Copy symbol at runtime */
-+#define R_ARM_GLOB_DAT 21 /* Create GOT entry */
-+#define R_ARM_JUMP_SLOT 22 /* Create PLT entry */
-+#define R_ARM_RELATIVE 23 /* Adjust by program base */
-+#define R_ARM_GOTOFF 24 /* 32 bit offset to GOT */
-+#define R_ARM_GOTPC 25 /* 32 bit PC relative offset to GOT */
-+#define R_ARM_GOT32 26 /* 32 bit GOT entry */
-+#define R_ARM_PLT32 27 /* 32 bit PLT address */
-+#define R_ARM_ALU_PCREL_7_0 32
-+#define R_ARM_ALU_PCREL_15_8 33
-+#define R_ARM_ALU_PCREL_23_15 34
-+#define R_ARM_LDR_SBREL_11_0 35
-+#define R_ARM_ALU_SBREL_19_12 36
-+#define R_ARM_ALU_SBREL_27_20 37
-+#define R_ARM_TLS_GOTDESC 90
-+#define R_ARM_TLS_CALL 91
-+#define R_ARM_TLS_DESCSEQ 92
-+#define R_ARM_THM_TLS_CALL 93
-+#define R_ARM_GNU_VTENTRY 100
-+#define R_ARM_GNU_VTINHERIT 101
-+#define R_ARM_THM_PC11 102 /* thumb unconditional branch */
-+#define R_ARM_THM_PC9 103 /* thumb conditional branch */
-+#define R_ARM_TLS_GD32 104 /* PC-rel 32 bit for global dynamic
-+ thread local data */
-+#define R_ARM_TLS_LDM32 105 /* PC-rel 32 bit for local dynamic
-+ thread local data */
-+#define R_ARM_TLS_LDO32 106 /* 32 bit offset relative to TLS
-+ block */
-+#define R_ARM_TLS_IE32 107 /* PC-rel 32 bit for GOT entry of
-+ static TLS block offset */
-+#define R_ARM_TLS_LE32 108 /* 32 bit offset relative to static
-+ TLS block */
-+#define R_ARM_THM_TLS_DESCSEQ 129
-+#define R_ARM_IRELATIVE 160
-+#define R_ARM_RXPC25 249
-+#define R_ARM_RSBREL32 250
-+#define R_ARM_THM_RPC22 251
-+#define R_ARM_RREL32 252
-+#define R_ARM_RABS22 253
-+#define R_ARM_RPC24 254
-+#define R_ARM_RBASE 255
-+/* Keep this the last entry. */
-+#define R_ARM_NUM 256
-+
-+/* IA-64 specific declarations. */
-+
-+/* Processor specific flags for the Ehdr e_flags field. */
-+#define EF_IA_64_MASKOS 0x0000000f /* os-specific flags */
-+#define EF_IA_64_ABI64 0x00000010 /* 64-bit ABI */
-+#define EF_IA_64_ARCH 0xff000000 /* arch. version mask */
-+
-+/* Processor specific values for the Phdr p_type field. */
-+#define PT_IA_64_ARCHEXT (PT_LOPROC + 0) /* arch extension bits */
-+#define PT_IA_64_UNWIND (PT_LOPROC + 1) /* ia64 unwind bits */
-+#define PT_IA_64_HP_OPT_ANOT (PT_LOOS + 0x12)
-+#define PT_IA_64_HP_HSL_ANOT (PT_LOOS + 0x13)
-+#define PT_IA_64_HP_STACK (PT_LOOS + 0x14)
-+
-+/* Processor specific flags for the Phdr p_flags field. */
-+#define PF_IA_64_NORECOV 0x80000000 /* spec insns w/o recovery */
-+
-+/* Processor specific values for the Shdr sh_type field. */
-+#define SHT_IA_64_EXT (SHT_LOPROC + 0) /* extension bits */
-+#define SHT_IA_64_UNWIND (SHT_LOPROC + 1) /* unwind bits */
-+
-+/* Processor specific flags for the Shdr sh_flags field. */
-+#define SHF_IA_64_SHORT 0x10000000 /* section near gp */
-+#define SHF_IA_64_NORECOV 0x20000000 /* spec insns w/o recovery */
-+
-+/* Processor specific values for the Dyn d_tag field. */
-+#define DT_IA_64_PLT_RESERVE (DT_LOPROC + 0)
-+#define DT_IA_64_NUM 1
-+
-+/* IA-64 relocations. */
-+#define R_IA64_NONE 0x00 /* none */
-+#define R_IA64_IMM14 0x21 /* symbol + addend, add imm14 */
-+#define R_IA64_IMM22 0x22 /* symbol + addend, add imm22 */
-+#define R_IA64_IMM64 0x23 /* symbol + addend, mov imm64 */
-+#define R_IA64_DIR32MSB 0x24 /* symbol + addend, data4 MSB */
-+#define R_IA64_DIR32LSB 0x25 /* symbol + addend, data4 LSB */
-+#define R_IA64_DIR64MSB 0x26 /* symbol + addend, data8 MSB */
-+#define R_IA64_DIR64LSB 0x27 /* symbol + addend, data8 LSB */
-+#define R_IA64_GPREL22 0x2a /* @gprel(sym + add), add imm22 */
-+#define R_IA64_GPREL64I 0x2b /* @gprel(sym + add), mov imm64 */
-+#define R_IA64_GPREL32MSB 0x2c /* @gprel(sym + add), data4 MSB */
-+#define R_IA64_GPREL32LSB 0x2d /* @gprel(sym + add), data4 LSB */
-+#define R_IA64_GPREL64MSB 0x2e /* @gprel(sym + add), data8 MSB */
-+#define R_IA64_GPREL64LSB 0x2f /* @gprel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF22 0x32 /* @ltoff(sym + add), add imm22 */
-+#define R_IA64_LTOFF64I 0x33 /* @ltoff(sym + add), mov imm64 */
-+#define R_IA64_PLTOFF22 0x3a /* @pltoff(sym + add), add imm22 */
-+#define R_IA64_PLTOFF64I 0x3b /* @pltoff(sym + add), mov imm64 */
-+#define R_IA64_PLTOFF64MSB 0x3e /* @pltoff(sym + add), data8 MSB */
-+#define R_IA64_PLTOFF64LSB 0x3f /* @pltoff(sym + add), data8 LSB */
-+#define R_IA64_FPTR64I 0x43 /* @fptr(sym + add), mov imm64 */
-+#define R_IA64_FPTR32MSB 0x44 /* @fptr(sym + add), data4 MSB */
-+#define R_IA64_FPTR32LSB 0x45 /* @fptr(sym + add), data4 LSB */
-+#define R_IA64_FPTR64MSB 0x46 /* @fptr(sym + add), data8 MSB */
-+#define R_IA64_FPTR64LSB 0x47 /* @fptr(sym + add), data8 LSB */
-+#define R_IA64_PCREL60B 0x48 /* @pcrel(sym + add), brl */
-+#define R_IA64_PCREL21B 0x49 /* @pcrel(sym + add), ptb, call */
-+#define R_IA64_PCREL21M 0x4a /* @pcrel(sym + add), chk.s */
-+#define R_IA64_PCREL21F 0x4b /* @pcrel(sym + add), fchkf */
-+#define R_IA64_PCREL32MSB 0x4c /* @pcrel(sym + add), data4 MSB */
-+#define R_IA64_PCREL32LSB 0x4d /* @pcrel(sym + add), data4 LSB */
-+#define R_IA64_PCREL64MSB 0x4e /* @pcrel(sym + add), data8 MSB */
-+#define R_IA64_PCREL64LSB 0x4f /* @pcrel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_FPTR22 0x52 /* @ltoff(@fptr(s+a)), imm22 */
-+#define R_IA64_LTOFF_FPTR64I 0x53 /* @ltoff(@fptr(s+a)), imm64 */
-+#define R_IA64_LTOFF_FPTR32MSB 0x54 /* @ltoff(@fptr(s+a)), data4 MSB */
-+#define R_IA64_LTOFF_FPTR32LSB 0x55 /* @ltoff(@fptr(s+a)), data4 LSB */
-+#define R_IA64_LTOFF_FPTR64MSB 0x56 /* @ltoff(@fptr(s+a)), data8 MSB */
-+#define R_IA64_LTOFF_FPTR64LSB 0x57 /* @ltoff(@fptr(s+a)), data8 LSB */
-+#define R_IA64_SEGREL32MSB 0x5c /* @segrel(sym + add), data4 MSB */
-+#define R_IA64_SEGREL32LSB 0x5d /* @segrel(sym + add), data4 LSB */
-+#define R_IA64_SEGREL64MSB 0x5e /* @segrel(sym + add), data8 MSB */
-+#define R_IA64_SEGREL64LSB 0x5f /* @segrel(sym + add), data8 LSB */
-+#define R_IA64_SECREL32MSB 0x64 /* @secrel(sym + add), data4 MSB */
-+#define R_IA64_SECREL32LSB 0x65 /* @secrel(sym + add), data4 LSB */
-+#define R_IA64_SECREL64MSB 0x66 /* @secrel(sym + add), data8 MSB */
-+#define R_IA64_SECREL64LSB 0x67 /* @secrel(sym + add), data8 LSB */
-+#define R_IA64_REL32MSB 0x6c /* data 4 + REL */
-+#define R_IA64_REL32LSB 0x6d /* data 4 + REL */
-+#define R_IA64_REL64MSB 0x6e /* data 8 + REL */
-+#define R_IA64_REL64LSB 0x6f /* data 8 + REL */
-+#define R_IA64_LTV32MSB 0x74 /* symbol + addend, data4 MSB */
-+#define R_IA64_LTV32LSB 0x75 /* symbol + addend, data4 LSB */
-+#define R_IA64_LTV64MSB 0x76 /* symbol + addend, data8 MSB */
-+#define R_IA64_LTV64LSB 0x77 /* symbol + addend, data8 LSB */
-+#define R_IA64_PCREL21BI 0x79 /* @pcrel(sym + add), 21bit inst */
-+#define R_IA64_PCREL22 0x7a /* @pcrel(sym + add), 22bit inst */
-+#define R_IA64_PCREL64I 0x7b /* @pcrel(sym + add), 64bit inst */
-+#define R_IA64_IPLTMSB 0x80 /* dynamic reloc, imported PLT, MSB */
-+#define R_IA64_IPLTLSB 0x81 /* dynamic reloc, imported PLT, LSB */
-+#define R_IA64_COPY 0x84 /* copy relocation */
-+#define R_IA64_SUB 0x85 /* Addend and symbol difference */
-+#define R_IA64_LTOFF22X 0x86 /* LTOFF22, relaxable. */
-+#define R_IA64_LDXMOV 0x87 /* Use of LTOFF22X. */
-+#define R_IA64_TPREL14 0x91 /* @tprel(sym + add), imm14 */
-+#define R_IA64_TPREL22 0x92 /* @tprel(sym + add), imm22 */
-+#define R_IA64_TPREL64I 0x93 /* @tprel(sym + add), imm64 */
-+#define R_IA64_TPREL64MSB 0x96 /* @tprel(sym + add), data8 MSB */
-+#define R_IA64_TPREL64LSB 0x97 /* @tprel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_TPREL22 0x9a /* @ltoff(@tprel(s+a)), imm2 */
-+#define R_IA64_DTPMOD64MSB 0xa6 /* @dtpmod(sym + add), data8 MSB */
-+#define R_IA64_DTPMOD64LSB 0xa7 /* @dtpmod(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_DTPMOD22 0xaa /* @ltoff(@dtpmod(sym + add)), imm22 */
-+#define R_IA64_DTPREL14 0xb1 /* @dtprel(sym + add), imm14 */
-+#define R_IA64_DTPREL22 0xb2 /* @dtprel(sym + add), imm22 */
-+#define R_IA64_DTPREL64I 0xb3 /* @dtprel(sym + add), imm64 */
-+#define R_IA64_DTPREL32MSB 0xb4 /* @dtprel(sym + add), data4 MSB */
-+#define R_IA64_DTPREL32LSB 0xb5 /* @dtprel(sym + add), data4 LSB */
-+#define R_IA64_DTPREL64MSB 0xb6 /* @dtprel(sym + add), data8 MSB */
-+#define R_IA64_DTPREL64LSB 0xb7 /* @dtprel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_DTPREL22 0xba /* @ltoff(@dtprel(s+a)), imm22 */
-+
-+/* SH specific declarations */
-+
-+/* Processor specific flags for the ELF header e_flags field. */
-+#define EF_SH_MACH_MASK 0x1f
-+#define EF_SH_UNKNOWN 0x0
-+#define EF_SH1 0x1
-+#define EF_SH2 0x2
-+#define EF_SH3 0x3
-+#define EF_SH_DSP 0x4
-+#define EF_SH3_DSP 0x5
-+#define EF_SH4AL_DSP 0x6
-+#define EF_SH3E 0x8
-+#define EF_SH4 0x9
-+#define EF_SH2E 0xb
-+#define EF_SH4A 0xc
-+#define EF_SH2A 0xd
-+#define EF_SH4_NOFPU 0x10
-+#define EF_SH4A_NOFPU 0x11
-+#define EF_SH4_NOMMU_NOFPU 0x12
-+#define EF_SH2A_NOFPU 0x13
-+#define EF_SH3_NOMMU 0x14
-+#define EF_SH2A_SH4_NOFPU 0x15
-+#define EF_SH2A_SH3_NOFPU 0x16
-+#define EF_SH2A_SH4 0x17
-+#define EF_SH2A_SH3E 0x18
-+
-+/* SH relocs. */
-+#define R_SH_NONE 0
-+#define R_SH_DIR32 1
-+#define R_SH_REL32 2
-+#define R_SH_DIR8WPN 3
-+#define R_SH_IND12W 4
-+#define R_SH_DIR8WPL 5
-+#define R_SH_DIR8WPZ 6
-+#define R_SH_DIR8BP 7
-+#define R_SH_DIR8W 8
-+#define R_SH_DIR8L 9
-+#define R_SH_SWITCH16 25
-+#define R_SH_SWITCH32 26
-+#define R_SH_USES 27
-+#define R_SH_COUNT 28
-+#define R_SH_ALIGN 29
-+#define R_SH_CODE 30
-+#define R_SH_DATA 31
-+#define R_SH_LABEL 32
-+#define R_SH_SWITCH8 33
-+#define R_SH_GNU_VTINHERIT 34
-+#define R_SH_GNU_VTENTRY 35
-+#define R_SH_TLS_GD_32 144
-+#define R_SH_TLS_LD_32 145
-+#define R_SH_TLS_LDO_32 146
-+#define R_SH_TLS_IE_32 147
-+#define R_SH_TLS_LE_32 148
-+#define R_SH_TLS_DTPMOD32 149
-+#define R_SH_TLS_DTPOFF32 150
-+#define R_SH_TLS_TPOFF32 151
-+#define R_SH_GOT32 160
-+#define R_SH_PLT32 161
-+#define R_SH_COPY 162
-+#define R_SH_GLOB_DAT 163
-+#define R_SH_JMP_SLOT 164
-+#define R_SH_RELATIVE 165
-+#define R_SH_GOTOFF 166
-+#define R_SH_GOTPC 167
-+/* Keep this the last entry. */
-+#define R_SH_NUM 256
-+
-+/* S/390 specific definitions. */
-+
-+/* Valid values for the e_flags field. */
-+
-+#define EF_S390_HIGH_GPRS 0x00000001 /* High GPRs kernel facility needed. */
-+
-+/* Additional s390 relocs */
-+
-+#define R_390_NONE 0 /* No reloc. */
-+#define R_390_8 1 /* Direct 8 bit. */
-+#define R_390_12 2 /* Direct 12 bit. */
-+#define R_390_16 3 /* Direct 16 bit. */
-+#define R_390_32 4 /* Direct 32 bit. */
-+#define R_390_PC32 5 /* PC relative 32 bit. */
-+#define R_390_GOT12 6 /* 12 bit GOT offset. */
-+#define R_390_GOT32 7 /* 32 bit GOT offset. */
-+#define R_390_PLT32 8 /* 32 bit PC relative PLT address. */
-+#define R_390_COPY 9 /* Copy symbol at runtime. */
-+#define R_390_GLOB_DAT 10 /* Create GOT entry. */
-+#define R_390_JMP_SLOT 11 /* Create PLT entry. */
-+#define R_390_RELATIVE 12 /* Adjust by program base. */
-+#define R_390_GOTOFF32 13 /* 32 bit offset to GOT. */
-+#define R_390_GOTPC 14 /* 32 bit PC relative offset to GOT. */
-+#define R_390_GOT16 15 /* 16 bit GOT offset. */
-+#define R_390_PC16 16 /* PC relative 16 bit. */
-+#define R_390_PC16DBL 17 /* PC relative 16 bit shifted by 1. */
-+#define R_390_PLT16DBL 18 /* 16 bit PC rel. PLT shifted by 1. */
-+#define R_390_PC32DBL 19 /* PC relative 32 bit shifted by 1. */
-+#define R_390_PLT32DBL 20 /* 32 bit PC rel. PLT shifted by 1. */
-+#define R_390_GOTPCDBL 21 /* 32 bit PC rel. GOT shifted by 1. */
-+#define R_390_64 22 /* Direct 64 bit. */
-+#define R_390_PC64 23 /* PC relative 64 bit. */
-+#define R_390_GOT64 24 /* 64 bit GOT offset. */
-+#define R_390_PLT64 25 /* 64 bit PC relative PLT address. */
-+#define R_390_GOTENT 26 /* 32 bit PC rel. to GOT entry >> 1. */
-+#define R_390_GOTOFF16 27 /* 16 bit offset to GOT. */
-+#define R_390_GOTOFF64 28 /* 64 bit offset to GOT. */
-+#define R_390_GOTPLT12 29 /* 12 bit offset to jump slot. */
-+#define R_390_GOTPLT16 30 /* 16 bit offset to jump slot. */
-+#define R_390_GOTPLT32 31 /* 32 bit offset to jump slot. */
-+#define R_390_GOTPLT64 32 /* 64 bit offset to jump slot. */
-+#define R_390_GOTPLTENT 33 /* 32 bit rel. offset to jump slot. */
-+#define R_390_PLTOFF16 34 /* 16 bit offset from GOT to PLT. */
-+#define R_390_PLTOFF32 35 /* 32 bit offset from GOT to PLT. */
-+#define R_390_PLTOFF64 36 /* 16 bit offset from GOT to PLT. */
-+#define R_390_TLS_LOAD 37 /* Tag for load insn in TLS code. */
-+#define R_390_TLS_GDCALL 38 /* Tag for function call in general
-+ dynamic TLS code. */
-+#define R_390_TLS_LDCALL 39 /* Tag for function call in local
-+ dynamic TLS code. */
-+#define R_390_TLS_GD32 40 /* Direct 32 bit for general dynamic
-+ thread local data. */
-+#define R_390_TLS_GD64 41 /* Direct 64 bit for general dynamic
-+ thread local data. */
-+#define R_390_TLS_GOTIE12 42 /* 12 bit GOT offset for static TLS
-+ block offset. */
-+#define R_390_TLS_GOTIE32 43 /* 32 bit GOT offset for static TLS
-+ block offset. */
-+#define R_390_TLS_GOTIE64 44 /* 64 bit GOT offset for static TLS
-+ block offset. */
-+#define R_390_TLS_LDM32 45 /* Direct 32 bit for local dynamic
-+ thread local data in LE code. */
-+#define R_390_TLS_LDM64 46 /* Direct 64 bit for local dynamic
-+ thread local data in LE code. */
-+#define R_390_TLS_IE32 47 /* 32 bit address of GOT entry for
-+ negated static TLS block offset. */
-+#define R_390_TLS_IE64 48 /* 64 bit address of GOT entry for
-+ negated static TLS block offset. */
-+#define R_390_TLS_IEENT 49 /* 32 bit rel. offset to GOT entry for
-+ negated static TLS block offset. */
-+#define R_390_TLS_LE32 50 /* 32 bit negated offset relative to
-+ static TLS block. */
-+#define R_390_TLS_LE64 51 /* 64 bit negated offset relative to
-+ static TLS block. */
-+#define R_390_TLS_LDO32 52 /* 32 bit offset relative to TLS
-+ block. */
-+#define R_390_TLS_LDO64 53 /* 64 bit offset relative to TLS
-+ block. */
-+#define R_390_TLS_DTPMOD 54 /* ID of module containing symbol. */
-+#define R_390_TLS_DTPOFF 55 /* Offset in TLS block. */
-+#define R_390_TLS_TPOFF 56 /* Negated offset in static TLS
-+ block. */
-+#define R_390_20 57 /* Direct 20 bit. */
-+#define R_390_GOT20 58 /* 20 bit GOT offset. */
-+#define R_390_GOTPLT20 59 /* 20 bit offset to jump slot. */
-+#define R_390_TLS_GOTIE20 60 /* 20 bit GOT offset for static TLS
-+ block offset. */
-+#define R_390_IRELATIVE 61 /* STT_GNU_IFUNC relocation. */
-+/* Keep this the last entry. */
-+#define R_390_NUM 62
-+
-+
-+/* CRIS relocations. */
-+#define R_CRIS_NONE 0
-+#define R_CRIS_8 1
-+#define R_CRIS_16 2
-+#define R_CRIS_32 3
-+#define R_CRIS_8_PCREL 4
-+#define R_CRIS_16_PCREL 5
-+#define R_CRIS_32_PCREL 6
-+#define R_CRIS_GNU_VTINHERIT 7
-+#define R_CRIS_GNU_VTENTRY 8
-+#define R_CRIS_COPY 9
-+#define R_CRIS_GLOB_DAT 10
-+#define R_CRIS_JUMP_SLOT 11
-+#define R_CRIS_RELATIVE 12
-+#define R_CRIS_16_GOT 13
-+#define R_CRIS_32_GOT 14
-+#define R_CRIS_16_GOTPLT 15
-+#define R_CRIS_32_GOTPLT 16
-+#define R_CRIS_32_GOTREL 17
-+#define R_CRIS_32_PLT_GOTREL 18
-+#define R_CRIS_32_PLT_PCREL 19
-+
-+#define R_CRIS_NUM 20
-+
-+
-+/* AMD x86-64 relocations. */
-+#define R_X86_64_NONE 0 /* No reloc */
-+#define R_X86_64_64 1 /* Direct 64 bit */
-+#define R_X86_64_PC32 2 /* PC relative 32 bit signed */
-+#define R_X86_64_GOT32 3 /* 32 bit GOT entry */
-+#define R_X86_64_PLT32 4 /* 32 bit PLT address */
-+#define R_X86_64_COPY 5 /* Copy symbol at runtime */
-+#define R_X86_64_GLOB_DAT 6 /* Create GOT entry */
-+#define R_X86_64_JUMP_SLOT 7 /* Create PLT entry */
-+#define R_X86_64_RELATIVE 8 /* Adjust by program base */
-+#define R_X86_64_GOTPCREL 9 /* 32 bit signed PC relative
-+ offset to GOT */
-+#define R_X86_64_32 10 /* Direct 32 bit zero extended */
-+#define R_X86_64_32S 11 /* Direct 32 bit sign extended */
-+#define R_X86_64_16 12 /* Direct 16 bit zero extended */
-+#define R_X86_64_PC16 13 /* 16 bit sign extended pc relative */
-+#define R_X86_64_8 14 /* Direct 8 bit sign extended */
-+#define R_X86_64_PC8 15 /* 8 bit sign extended pc relative */
-+#define R_X86_64_DTPMOD64 16 /* ID of module containing symbol */
-+#define R_X86_64_DTPOFF64 17 /* Offset in module's TLS block */
-+#define R_X86_64_TPOFF64 18 /* Offset in initial TLS block */
-+#define R_X86_64_TLSGD 19 /* 32 bit signed PC relative offset
-+ to two GOT entries for GD symbol */
-+#define R_X86_64_TLSLD 20 /* 32 bit signed PC relative offset
-+ to two GOT entries for LD symbol */
-+#define R_X86_64_DTPOFF32 21 /* Offset in TLS block */
-+#define R_X86_64_GOTTPOFF 22 /* 32 bit signed PC relative offset
-+ to GOT entry for IE symbol */
-+#define R_X86_64_TPOFF32 23 /* Offset in initial TLS block */
-+#define R_X86_64_PC64 24 /* PC relative 64 bit */
-+#define R_X86_64_GOTOFF64 25 /* 64 bit offset to GOT */
-+#define R_X86_64_GOTPC32 26 /* 32 bit signed pc relative
-+ offset to GOT */
-+#define R_X86_64_GOT64 27 /* 64-bit GOT entry offset */
-+#define R_X86_64_GOTPCREL64 28 /* 64-bit PC relative offset
-+ to GOT entry */
-+#define R_X86_64_GOTPC64 29 /* 64-bit PC relative offset to GOT */
-+#define R_X86_64_GOTPLT64 30 /* like GOT64, says PLT entry needed */
-+#define R_X86_64_PLTOFF64 31 /* 64-bit GOT relative offset
-+ to PLT entry */
-+#define R_X86_64_SIZE32 32 /* Size of symbol plus 32-bit addend */
-+#define R_X86_64_SIZE64 33 /* Size of symbol plus 64-bit addend */
-+#define R_X86_64_GOTPC32_TLSDESC 34 /* GOT offset for TLS descriptor. */
-+#define R_X86_64_TLSDESC_CALL 35 /* Marker for call through TLS
-+ descriptor. */
-+#define R_X86_64_TLSDESC 36 /* TLS descriptor. */
-+#define R_X86_64_IRELATIVE 37 /* Adjust indirectly by program base */
-+#define R_X86_64_RELATIVE64 38 /* 64-bit adjust by program base */
-+
-+#define R_X86_64_NUM 39
-+
-+
-+/* AM33 relocations. */
-+#define R_MN10300_NONE 0 /* No reloc. */
-+#define R_MN10300_32 1 /* Direct 32 bit. */
-+#define R_MN10300_16 2 /* Direct 16 bit. */
-+#define R_MN10300_8 3 /* Direct 8 bit. */
-+#define R_MN10300_PCREL32 4 /* PC-relative 32-bit. */
-+#define R_MN10300_PCREL16 5 /* PC-relative 16-bit signed. */
-+#define R_MN10300_PCREL8 6 /* PC-relative 8-bit signed. */
-+#define R_MN10300_GNU_VTINHERIT 7 /* Ancient C++ vtable garbage... */
-+#define R_MN10300_GNU_VTENTRY 8 /* ... collection annotation. */
-+#define R_MN10300_24 9 /* Direct 24 bit. */
-+#define R_MN10300_GOTPC32 10 /* 32-bit PCrel offset to GOT. */
-+#define R_MN10300_GOTPC16 11 /* 16-bit PCrel offset to GOT. */
-+#define R_MN10300_GOTOFF32 12 /* 32-bit offset from GOT. */
-+#define R_MN10300_GOTOFF24 13 /* 24-bit offset from GOT. */
-+#define R_MN10300_GOTOFF16 14 /* 16-bit offset from GOT. */
-+#define R_MN10300_PLT32 15 /* 32-bit PCrel to PLT entry. */
-+#define R_MN10300_PLT16 16 /* 16-bit PCrel to PLT entry. */
-+#define R_MN10300_GOT32 17 /* 32-bit offset to GOT entry. */
-+#define R_MN10300_GOT24 18 /* 24-bit offset to GOT entry. */
-+#define R_MN10300_GOT16 19 /* 16-bit offset to GOT entry. */
-+#define R_MN10300_COPY 20 /* Copy symbol at runtime. */
-+#define R_MN10300_GLOB_DAT 21 /* Create GOT entry. */
-+#define R_MN10300_JMP_SLOT 22 /* Create PLT entry. */
-+#define R_MN10300_RELATIVE 23 /* Adjust by program base. */
-+
-+#define R_MN10300_NUM 24
-+
-+
-+/* M32R relocs. */
-+#define R_M32R_NONE 0 /* No reloc. */
-+#define R_M32R_16 1 /* Direct 16 bit. */
-+#define R_M32R_32 2 /* Direct 32 bit. */
-+#define R_M32R_24 3 /* Direct 24 bit. */
-+#define R_M32R_10_PCREL 4 /* PC relative 10 bit shifted. */
-+#define R_M32R_18_PCREL 5 /* PC relative 18 bit shifted. */
-+#define R_M32R_26_PCREL 6 /* PC relative 26 bit shifted. */
-+#define R_M32R_HI16_ULO 7 /* High 16 bit with unsigned low. */
-+#define R_M32R_HI16_SLO 8 /* High 16 bit with signed low. */
-+#define R_M32R_LO16 9 /* Low 16 bit. */
-+#define R_M32R_SDA16 10 /* 16 bit offset in SDA. */
-+#define R_M32R_GNU_VTINHERIT 11
-+#define R_M32R_GNU_VTENTRY 12
-+/* M32R relocs use SHT_RELA. */
-+#define R_M32R_16_RELA 33 /* Direct 16 bit. */
-+#define R_M32R_32_RELA 34 /* Direct 32 bit. */
-+#define R_M32R_24_RELA 35 /* Direct 24 bit. */
-+#define R_M32R_10_PCREL_RELA 36 /* PC relative 10 bit shifted. */
-+#define R_M32R_18_PCREL_RELA 37 /* PC relative 18 bit shifted. */
-+#define R_M32R_26_PCREL_RELA 38 /* PC relative 26 bit shifted. */
-+#define R_M32R_HI16_ULO_RELA 39 /* High 16 bit with unsigned low */
-+#define R_M32R_HI16_SLO_RELA 40 /* High 16 bit with signed low */
-+#define R_M32R_LO16_RELA 41 /* Low 16 bit */
-+#define R_M32R_SDA16_RELA 42 /* 16 bit offset in SDA */
-+#define R_M32R_RELA_GNU_VTINHERIT 43
-+#define R_M32R_RELA_GNU_VTENTRY 44
-+#define R_M32R_REL32 45 /* PC relative 32 bit. */
-+
-+#define R_M32R_GOT24 48 /* 24 bit GOT entry */
-+#define R_M32R_26_PLTREL 49 /* 26 bit PC relative to PLT shifted */
-+#define R_M32R_COPY 50 /* Copy symbol at runtime */
-+#define R_M32R_GLOB_DAT 51 /* Create GOT entry */
-+#define R_M32R_JMP_SLOT 52 /* Create PLT entry */
-+#define R_M32R_RELATIVE 53 /* Adjust by program base */
-+#define R_M32R_GOTOFF 54 /* 24 bit offset to GOT */
-+#define R_M32R_GOTPC24 55 /* 24 bit PC relative offset to GOT */
-+#define R_M32R_GOT16_HI_ULO 56 /* High 16 bit GOT entry with unsigned
-+ low */
-+#define R_M32R_GOT16_HI_SLO 57 /* High 16 bit GOT entry with signed
-+ low */
-+#define R_M32R_GOT16_LO 58 /* Low 16 bit GOT entry */
-+#define R_M32R_GOTPC_HI_ULO 59 /* High 16 bit PC relative offset to
-+ GOT with unsigned low */
-+#define R_M32R_GOTPC_HI_SLO 60 /* High 16 bit PC relative offset to
-+ GOT with signed low */
-+#define R_M32R_GOTPC_LO 61 /* Low 16 bit PC relative offset to
-+ GOT */
-+#define R_M32R_GOTOFF_HI_ULO 62 /* High 16 bit offset to GOT
-+ with unsigned low */
-+#define R_M32R_GOTOFF_HI_SLO 63 /* High 16 bit offset to GOT
-+ with signed low */
-+#define R_M32R_GOTOFF_LO 64 /* Low 16 bit offset to GOT */
-+#define R_M32R_NUM 256 /* Keep this the last entry. */
-+
-+
-+/* TILEPro relocations. */
-+#define R_TILEPRO_NONE 0 /* No reloc */
-+#define R_TILEPRO_32 1 /* Direct 32 bit */
-+#define R_TILEPRO_16 2 /* Direct 16 bit */
-+#define R_TILEPRO_8 3 /* Direct 8 bit */
-+#define R_TILEPRO_32_PCREL 4 /* PC relative 32 bit */
-+#define R_TILEPRO_16_PCREL 5 /* PC relative 16 bit */
-+#define R_TILEPRO_8_PCREL 6 /* PC relative 8 bit */
-+#define R_TILEPRO_LO16 7 /* Low 16 bit */
-+#define R_TILEPRO_HI16 8 /* High 16 bit */
-+#define R_TILEPRO_HA16 9 /* High 16 bit, adjusted */
-+#define R_TILEPRO_COPY 10 /* Copy relocation */
-+#define R_TILEPRO_GLOB_DAT 11 /* Create GOT entry */
-+#define R_TILEPRO_JMP_SLOT 12 /* Create PLT entry */
-+#define R_TILEPRO_RELATIVE 13 /* Adjust by program base */
-+#define R_TILEPRO_BROFF_X1 14 /* X1 pipe branch offset */
-+#define R_TILEPRO_JOFFLONG_X1 15 /* X1 pipe jump offset */
-+#define R_TILEPRO_JOFFLONG_X1_PLT 16 /* X1 pipe jump offset to PLT */
-+#define R_TILEPRO_IMM8_X0 17 /* X0 pipe 8-bit */
-+#define R_TILEPRO_IMM8_Y0 18 /* Y0 pipe 8-bit */
-+#define R_TILEPRO_IMM8_X1 19 /* X1 pipe 8-bit */
-+#define R_TILEPRO_IMM8_Y1 20 /* Y1 pipe 8-bit */
-+#define R_TILEPRO_MT_IMM15_X1 21 /* X1 pipe mtspr */
-+#define R_TILEPRO_MF_IMM15_X1 22 /* X1 pipe mfspr */
-+#define R_TILEPRO_IMM16_X0 23 /* X0 pipe 16-bit */
-+#define R_TILEPRO_IMM16_X1 24 /* X1 pipe 16-bit */
-+#define R_TILEPRO_IMM16_X0_LO 25 /* X0 pipe low 16-bit */
-+#define R_TILEPRO_IMM16_X1_LO 26 /* X1 pipe low 16-bit */
-+#define R_TILEPRO_IMM16_X0_HI 27 /* X0 pipe high 16-bit */
-+#define R_TILEPRO_IMM16_X1_HI 28 /* X1 pipe high 16-bit */
-+#define R_TILEPRO_IMM16_X0_HA 29 /* X0 pipe high 16-bit, adjusted */
-+#define R_TILEPRO_IMM16_X1_HA 30 /* X1 pipe high 16-bit, adjusted */
-+#define R_TILEPRO_IMM16_X0_PCREL 31 /* X0 pipe PC relative 16 bit */
-+#define R_TILEPRO_IMM16_X1_PCREL 32 /* X1 pipe PC relative 16 bit */
-+#define R_TILEPRO_IMM16_X0_LO_PCREL 33 /* X0 pipe PC relative low 16 bit */
-+#define R_TILEPRO_IMM16_X1_LO_PCREL 34 /* X1 pipe PC relative low 16 bit */
-+#define R_TILEPRO_IMM16_X0_HI_PCREL 35 /* X0 pipe PC relative high 16 bit */
-+#define R_TILEPRO_IMM16_X1_HI_PCREL 36 /* X1 pipe PC relative high 16 bit */
-+#define R_TILEPRO_IMM16_X0_HA_PCREL 37 /* X0 pipe PC relative ha() 16 bit */
-+#define R_TILEPRO_IMM16_X1_HA_PCREL 38 /* X1 pipe PC relative ha() 16 bit */
-+#define R_TILEPRO_IMM16_X0_GOT 39 /* X0 pipe 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT 40 /* X1 pipe 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X0_GOT_LO 41 /* X0 pipe low 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT_LO 42 /* X1 pipe low 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X0_GOT_HI 43 /* X0 pipe high 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT_HI 44 /* X1 pipe high 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X0_GOT_HA 45 /* X0 pipe ha() 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT_HA 46 /* X1 pipe ha() 16-bit GOT offset */
-+#define R_TILEPRO_MMSTART_X0 47 /* X0 pipe mm "start" */
-+#define R_TILEPRO_MMEND_X0 48 /* X0 pipe mm "end" */
-+#define R_TILEPRO_MMSTART_X1 49 /* X1 pipe mm "start" */
-+#define R_TILEPRO_MMEND_X1 50 /* X1 pipe mm "end" */
-+#define R_TILEPRO_SHAMT_X0 51 /* X0 pipe shift amount */
-+#define R_TILEPRO_SHAMT_X1 52 /* X1 pipe shift amount */
-+#define R_TILEPRO_SHAMT_Y0 53 /* Y0 pipe shift amount */
-+#define R_TILEPRO_SHAMT_Y1 54 /* Y1 pipe shift amount */
-+#define R_TILEPRO_DEST_IMM8_X1 55 /* X1 pipe destination 8-bit */
-+/* Relocs 56-59 are currently not defined. */
-+#define R_TILEPRO_TLS_GD_CALL 60 /* "jal" for TLS GD */
-+#define R_TILEPRO_IMM8_X0_TLS_GD_ADD 61 /* X0 pipe "addi" for TLS GD */
-+#define R_TILEPRO_IMM8_X1_TLS_GD_ADD 62 /* X1 pipe "addi" for TLS GD */
-+#define R_TILEPRO_IMM8_Y0_TLS_GD_ADD 63 /* Y0 pipe "addi" for TLS GD */
-+#define R_TILEPRO_IMM8_Y1_TLS_GD_ADD 64 /* Y1 pipe "addi" for TLS GD */
-+#define R_TILEPRO_TLS_IE_LOAD 65 /* "lw_tls" for TLS IE */
-+#define R_TILEPRO_IMM16_X0_TLS_GD 66 /* X0 pipe 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD 67 /* X1 pipe 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_GD_LO 68 /* X0 pipe low 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD_LO 69 /* X1 pipe low 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_GD_HI 70 /* X0 pipe high 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD_HI 71 /* X1 pipe high 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_GD_HA 72 /* X0 pipe ha() 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD_HA 73 /* X1 pipe ha() 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE 74 /* X0 pipe 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE 75 /* X1 pipe 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE_LO 76 /* X0 pipe low 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE_LO 77 /* X1 pipe low 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE_HI 78 /* X0 pipe high 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE_HI 79 /* X1 pipe high 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE_HA 80 /* X0 pipe ha() 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE_HA 81 /* X1 pipe ha() 16-bit TLS IE offset */
-+#define R_TILEPRO_TLS_DTPMOD32 82 /* ID of module containing symbol */
-+#define R_TILEPRO_TLS_DTPOFF32 83 /* Offset in TLS block */
-+#define R_TILEPRO_TLS_TPOFF32 84 /* Offset in static TLS block */
-+#define R_TILEPRO_IMM16_X0_TLS_LE 85 /* X0 pipe 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE 86 /* X1 pipe 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_LE_LO 87 /* X0 pipe low 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE_LO 88 /* X1 pipe low 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_LE_HI 89 /* X0 pipe high 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE_HI 90 /* X1 pipe high 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_LE_HA 91 /* X0 pipe ha() 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE_HA 92 /* X1 pipe ha() 16-bit TLS LE offset */
-+
-+#define R_TILEPRO_GNU_VTINHERIT 128 /* GNU C++ vtable hierarchy */
-+#define R_TILEPRO_GNU_VTENTRY 129 /* GNU C++ vtable member usage */
-+
-+#define R_TILEPRO_NUM 130
-+
-+
-+/* TILE-Gx relocations. */
-+#define R_TILEGX_NONE 0 /* No reloc */
-+#define R_TILEGX_64 1 /* Direct 64 bit */
-+#define R_TILEGX_32 2 /* Direct 32 bit */
-+#define R_TILEGX_16 3 /* Direct 16 bit */
-+#define R_TILEGX_8 4 /* Direct 8 bit */
-+#define R_TILEGX_64_PCREL 5 /* PC relative 64 bit */
-+#define R_TILEGX_32_PCREL 6 /* PC relative 32 bit */
-+#define R_TILEGX_16_PCREL 7 /* PC relative 16 bit */
-+#define R_TILEGX_8_PCREL 8 /* PC relative 8 bit */
-+#define R_TILEGX_HW0 9 /* hword 0 16-bit */
-+#define R_TILEGX_HW1 10 /* hword 1 16-bit */
-+#define R_TILEGX_HW2 11 /* hword 2 16-bit */
-+#define R_TILEGX_HW3 12 /* hword 3 16-bit */
-+#define R_TILEGX_HW0_LAST 13 /* last hword 0 16-bit */
-+#define R_TILEGX_HW1_LAST 14 /* last hword 1 16-bit */
-+#define R_TILEGX_HW2_LAST 15 /* last hword 2 16-bit */
-+#define R_TILEGX_COPY 16 /* Copy relocation */
-+#define R_TILEGX_GLOB_DAT 17 /* Create GOT entry */
-+#define R_TILEGX_JMP_SLOT 18 /* Create PLT entry */
-+#define R_TILEGX_RELATIVE 19 /* Adjust by program base */
-+#define R_TILEGX_BROFF_X1 20 /* X1 pipe branch offset */
-+#define R_TILEGX_JUMPOFF_X1 21 /* X1 pipe jump offset */
-+#define R_TILEGX_JUMPOFF_X1_PLT 22 /* X1 pipe jump offset to PLT */
-+#define R_TILEGX_IMM8_X0 23 /* X0 pipe 8-bit */
-+#define R_TILEGX_IMM8_Y0 24 /* Y0 pipe 8-bit */
-+#define R_TILEGX_IMM8_X1 25 /* X1 pipe 8-bit */
-+#define R_TILEGX_IMM8_Y1 26 /* Y1 pipe 8-bit */
-+#define R_TILEGX_DEST_IMM8_X1 27 /* X1 pipe destination 8-bit */
-+#define R_TILEGX_MT_IMM14_X1 28 /* X1 pipe mtspr */
-+#define R_TILEGX_MF_IMM14_X1 29 /* X1 pipe mfspr */
-+#define R_TILEGX_MMSTART_X0 30 /* X0 pipe mm "start" */
-+#define R_TILEGX_MMEND_X0 31 /* X0 pipe mm "end" */
-+#define R_TILEGX_SHAMT_X0 32 /* X0 pipe shift amount */
-+#define R_TILEGX_SHAMT_X1 33 /* X1 pipe shift amount */
-+#define R_TILEGX_SHAMT_Y0 34 /* Y0 pipe shift amount */
-+#define R_TILEGX_SHAMT_Y1 35 /* Y1 pipe shift amount */
-+#define R_TILEGX_IMM16_X0_HW0 36 /* X0 pipe hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0 37 /* X1 pipe hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1 38 /* X0 pipe hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1 39 /* X1 pipe hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2 40 /* X0 pipe hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2 41 /* X1 pipe hword 2 */
-+#define R_TILEGX_IMM16_X0_HW3 42 /* X0 pipe hword 3 */
-+#define R_TILEGX_IMM16_X1_HW3 43 /* X1 pipe hword 3 */
-+#define R_TILEGX_IMM16_X0_HW0_LAST 44 /* X0 pipe last hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0_LAST 45 /* X1 pipe last hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1_LAST 46 /* X0 pipe last hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1_LAST 47 /* X1 pipe last hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2_LAST 48 /* X0 pipe last hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2_LAST 49 /* X1 pipe last hword 2 */
-+#define R_TILEGX_IMM16_X0_HW0_PCREL 50 /* X0 pipe PC relative hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0_PCREL 51 /* X1 pipe PC relative hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1_PCREL 52 /* X0 pipe PC relative hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1_PCREL 53 /* X1 pipe PC relative hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2_PCREL 54 /* X0 pipe PC relative hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2_PCREL 55 /* X1 pipe PC relative hword 2 */
-+#define R_TILEGX_IMM16_X0_HW3_PCREL 56 /* X0 pipe PC relative hword 3 */
-+#define R_TILEGX_IMM16_X1_HW3_PCREL 57 /* X1 pipe PC relative hword 3 */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_PCREL 58 /* X0 pipe PC-rel last hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_PCREL 59 /* X1 pipe PC-rel last hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_PCREL 60 /* X0 pipe PC-rel last hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_PCREL 61 /* X1 pipe PC-rel last hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2_LAST_PCREL 62 /* X0 pipe PC-rel last hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2_LAST_PCREL 63 /* X1 pipe PC-rel last hword 2 */
-+#define R_TILEGX_IMM16_X0_HW0_GOT 64 /* X0 pipe hword 0 GOT offset */
-+#define R_TILEGX_IMM16_X1_HW0_GOT 65 /* X1 pipe hword 0 GOT offset */
-+/* Relocs 66-71 are currently not defined. */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_GOT 72 /* X0 pipe last hword 0 GOT offset */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_GOT 73 /* X1 pipe last hword 0 GOT offset */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_GOT 74 /* X0 pipe last hword 1 GOT offset */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_GOT 75 /* X1 pipe last hword 1 GOT offset */
-+/* Relocs 76-77 are currently not defined. */
-+#define R_TILEGX_IMM16_X0_HW0_TLS_GD 78 /* X0 pipe hword 0 TLS GD offset */
-+#define R_TILEGX_IMM16_X1_HW0_TLS_GD 79 /* X1 pipe hword 0 TLS GD offset */
-+#define R_TILEGX_IMM16_X0_HW0_TLS_LE 80 /* X0 pipe hword 0 TLS LE offset */
-+#define R_TILEGX_IMM16_X1_HW0_TLS_LE 81 /* X1 pipe hword 0 TLS LE offset */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_LE 82 /* X0 pipe last hword 0 LE off */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_LE 83 /* X1 pipe last hword 0 LE off */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_LE 84 /* X0 pipe last hword 1 LE off */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_LE 85 /* X1 pipe last hword 1 LE off */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_GD 86 /* X0 pipe last hword 0 GD off */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_GD 87 /* X1 pipe last hword 0 GD off */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_GD 88 /* X0 pipe last hword 1 GD off */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_GD 89 /* X1 pipe last hword 1 GD off */
-+/* Relocs 90-91 are currently not defined. */
-+#define R_TILEGX_IMM16_X0_HW0_TLS_IE 92 /* X0 pipe hword 0 TLS IE offset */
-+#define R_TILEGX_IMM16_X1_HW0_TLS_IE 93 /* X1 pipe hword 0 TLS IE offset */
-+/* Relocs 94-99 are currently not defined. */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_IE 100 /* X0 pipe last hword 0 IE off */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_IE 101 /* X1 pipe last hword 0 IE off */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_IE 102 /* X0 pipe last hword 1 IE off */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_IE 103 /* X1 pipe last hword 1 IE off */
-+/* Relocs 104-105 are currently not defined. */
-+#define R_TILEGX_TLS_DTPMOD64 106 /* 64-bit ID of symbol's module */
-+#define R_TILEGX_TLS_DTPOFF64 107 /* 64-bit offset in TLS block */
-+#define R_TILEGX_TLS_TPOFF64 108 /* 64-bit offset in static TLS block */
-+#define R_TILEGX_TLS_DTPMOD32 109 /* 32-bit ID of symbol's module */
-+#define R_TILEGX_TLS_DTPOFF32 110 /* 32-bit offset in TLS block */
-+#define R_TILEGX_TLS_TPOFF32 111 /* 32-bit offset in static TLS block */
-+#define R_TILEGX_TLS_GD_CALL 112 /* "jal" for TLS GD */
-+#define R_TILEGX_IMM8_X0_TLS_GD_ADD 113 /* X0 pipe "addi" for TLS GD */
-+#define R_TILEGX_IMM8_X1_TLS_GD_ADD 114 /* X1 pipe "addi" for TLS GD */
-+#define R_TILEGX_IMM8_Y0_TLS_GD_ADD 115 /* Y0 pipe "addi" for TLS GD */
-+#define R_TILEGX_IMM8_Y1_TLS_GD_ADD 116 /* Y1 pipe "addi" for TLS GD */
-+#define R_TILEGX_TLS_IE_LOAD 117 /* "ld_tls" for TLS IE */
-+#define R_TILEGX_IMM8_X0_TLS_ADD 118 /* X0 pipe "addi" for TLS GD/IE */
-+#define R_TILEGX_IMM8_X1_TLS_ADD 119 /* X1 pipe "addi" for TLS GD/IE */
-+#define R_TILEGX_IMM8_Y0_TLS_ADD 120 /* Y0 pipe "addi" for TLS GD/IE */
-+#define R_TILEGX_IMM8_Y1_TLS_ADD 121 /* Y1 pipe "addi" for TLS GD/IE */
-+
-+#define R_TILEGX_GNU_VTINHERIT 128 /* GNU C++ vtable hierarchy */
-+#define R_TILEGX_GNU_VTENTRY 129 /* GNU C++ vtable member usage */
-+
-+#define R_TILEGX_NUM 130
-+
-+#endif /* elf.h */
+++ /dev/null
---- a/tools/include/tools/be_byteshift.h
-+++ b/tools/include/tools/be_byteshift.h
-@@ -1,6 +1,10 @@
- #ifndef _TOOLS_BE_BYTESHIFT_H
- #define _TOOLS_BE_BYTESHIFT_H
-
-+#ifndef __linux__
-+#include "linux_types.h"
-+#endif
-+
- #include <stdint.h>
-
- static inline uint16_t __get_unaligned_be16(const uint8_t *p)
---- a/tools/include/tools/le_byteshift.h
-+++ b/tools/include/tools/le_byteshift.h
-@@ -1,6 +1,10 @@
- #ifndef _TOOLS_LE_BYTESHIFT_H
- #define _TOOLS_LE_BYTESHIFT_H
-
-+#ifndef __linux__
-+#include "linux_types.h"
-+#endif
-+
- #include <stdint.h>
-
- static inline uint16_t __get_unaligned_le16(const uint8_t *p)
---- /dev/null
-+++ b/tools/include/tools/linux_types.h
-@@ -0,0 +1,22 @@
-+#ifndef __LINUX_TYPES_H
-+#define __LINUX_TYPES_H
-+
-+#include <stdint.h>
-+
-+typedef uint8_t __u8;
-+typedef uint8_t __be8;
-+typedef uint8_t __le8;
-+
-+typedef uint16_t __u16;
-+typedef uint16_t __be16;
-+typedef uint16_t __le16;
-+
-+typedef uint32_t __u32;
-+typedef uint32_t __be32;
-+typedef uint32_t __le32;
-+
-+typedef uint64_t __u64;
-+typedef uint64_t __be64;
-+typedef uint64_t __le64;
-+
-+#endif
+++ /dev/null
---- a/arch/x86/vdso/vdso2c.c
-+++ b/arch/x86/vdso/vdso2c.c
-@@ -63,8 +63,8 @@
-
- #include <tools/le_byteshift.h>
-
--#include <linux/elf.h>
--#include <linux/types.h>
-+#include <elf.h>
-+#include <stdbool.h>
-
- const char *outfilename;
-
+++ /dev/null
---- a/include/uapi/linux/spi/spidev.h
-+++ b/include/uapi/linux/spi/spidev.h
-@@ -111,7 +111,7 @@ struct spi_ioc_transfer {
-
- /* not all platforms use <asm-generic/ioctl.h> or _IOC_TYPECHECK() ... */
- #define SPI_MSGSIZE(N) \
-- ((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << _IOC_SIZEBITS)) \
-+ ((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << 13)) \
- ? ((N)*(sizeof (struct spi_ioc_transfer))) : 0)
- #define SPI_IOC_MESSAGE(N) _IOW(SPI_IOC_MAGIC, 0, char[SPI_MSGSIZE(N)])
-
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-
-use -ffunction-sections, -fdata-sections and --gc-sections
-
-In combination with kernel symbol export stripping this significantly reduces
-the kernel image size. Used on both ARM and MIPS architectures.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
-
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -89,10 +89,14 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
- #
- cflags-y += -G 0 -mno-abicalls -fno-pic -pipe
- cflags-y += -msoft-float
--LDFLAGS_vmlinux += -G 0 -static -n -nostdlib
-+LDFLAGS_vmlinux += -G 0 -static -n -nostdlib --gc-sections
- KBUILD_AFLAGS_MODULE += -mlong-calls
- KBUILD_CFLAGS_MODULE += -mlong-calls
-
-+ifndef CONFIG_FUNCTION_TRACER
-+KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections
-+endif
-+
- #
- # pass -msoft-float to GAS if it supports it. However on newer binutils
- # (specifically newer than 2.24.51.20140728) we then also need to explicitly
---- a/arch/mips/kernel/vmlinux.lds.S
-+++ b/arch/mips/kernel/vmlinux.lds.S
-@@ -67,7 +67,7 @@ SECTIONS
- /* Exception table for data bus errors */
- __dbe_table : {
- __start___dbe_table = .;
-- *(__dbe_table)
-+ KEEP(*(__dbe_table))
- __stop___dbe_table = .;
- }
-
-@@ -112,7 +112,7 @@ SECTIONS
- . = ALIGN(4);
- .mips.machines.init : AT(ADDR(.mips.machines.init) - LOAD_OFFSET) {
- __mips_machines_start = .;
-- *(.mips.machines.init)
-+ KEEP(*(.mips.machines.init))
- __mips_machines_end = .;
- }
-
---- a/include/asm-generic/vmlinux.lds.h
-+++ b/include/asm-generic/vmlinux.lds.h
-@@ -89,7 +89,7 @@
- #ifdef CONFIG_FTRACE_MCOUNT_RECORD
- #define MCOUNT_REC() . = ALIGN(8); \
- VMLINUX_SYMBOL(__start_mcount_loc) = .; \
-- *(__mcount_loc) \
-+ KEEP(*(__mcount_loc)) \
- VMLINUX_SYMBOL(__stop_mcount_loc) = .;
- #else
- #define MCOUNT_REC()
-@@ -97,7 +97,7 @@
-
- #ifdef CONFIG_TRACE_BRANCH_PROFILING
- #define LIKELY_PROFILE() VMLINUX_SYMBOL(__start_annotated_branch_profile) = .; \
-- *(_ftrace_annotated_branch) \
-+ KEEP(*(_ftrace_annotated_branch)) \
- VMLINUX_SYMBOL(__stop_annotated_branch_profile) = .;
- #else
- #define LIKELY_PROFILE()
-@@ -105,7 +105,7 @@
-
- #ifdef CONFIG_PROFILE_ALL_BRANCHES
- #define BRANCH_PROFILE() VMLINUX_SYMBOL(__start_branch_profile) = .; \
-- *(_ftrace_branch) \
-+ KEEP(*(_ftrace_branch)) \
- VMLINUX_SYMBOL(__stop_branch_profile) = .;
- #else
- #define BRANCH_PROFILE()
-@@ -114,7 +114,7 @@
- #ifdef CONFIG_KPROBES
- #define KPROBE_BLACKLIST() . = ALIGN(8); \
- VMLINUX_SYMBOL(__start_kprobe_blacklist) = .; \
-- *(_kprobe_blacklist) \
-+ KEEP(*(_kprobe_blacklist)) \
- VMLINUX_SYMBOL(__stop_kprobe_blacklist) = .;
- #else
- #define KPROBE_BLACKLIST()
-@@ -123,7 +123,7 @@
- #ifdef CONFIG_EVENT_TRACING
- #define FTRACE_EVENTS() . = ALIGN(8); \
- VMLINUX_SYMBOL(__start_ftrace_events) = .; \
-- *(_ftrace_events) \
-+ KEEP(*(_ftrace_events)) \
- VMLINUX_SYMBOL(__stop_ftrace_events) = .;
- #else
- #define FTRACE_EVENTS()
-@@ -131,7 +131,7 @@
-
- #ifdef CONFIG_TRACING
- #define TRACE_PRINTKS() VMLINUX_SYMBOL(__start___trace_bprintk_fmt) = .; \
-- *(__trace_printk_fmt) /* Trace_printk fmt' pointer */ \
-+ KEEP(*(__trace_printk_fmt)) /* Trace_printk fmt' pointer */ \
- VMLINUX_SYMBOL(__stop___trace_bprintk_fmt) = .;
- #define TRACEPOINT_STR() VMLINUX_SYMBOL(__start___tracepoint_str) = .; \
- *(__tracepoint_str) /* Trace_printk fmt' pointer */ \
-@@ -144,7 +144,7 @@
- #ifdef CONFIG_FTRACE_SYSCALLS
- #define TRACE_SYSCALLS() . = ALIGN(8); \
- VMLINUX_SYMBOL(__start_syscalls_metadata) = .; \
-- *(__syscalls_metadata) \
-+ KEEP(*(__syscalls_metadata)) \
- VMLINUX_SYMBOL(__stop_syscalls_metadata) = .;
- #else
- #define TRACE_SYSCALLS()
-@@ -158,8 +158,8 @@
- #define _OF_TABLE_1(name) \
- . = ALIGN(8); \
- VMLINUX_SYMBOL(__##name##_of_table) = .; \
-- *(__##name##_of_table) \
-- *(__##name##_of_table_end)
-+ KEEP(*(__##name##_of_table)) \
-+ KEEP(*(__##name##_of_table_end))
-
- #define CLKSRC_OF_TABLES() OF_TABLE(CONFIG_CLKSRC_OF, clksrc)
- #define IRQCHIP_OF_MATCH_TABLE() OF_TABLE(CONFIG_IRQCHIP, irqchip)
-@@ -171,7 +171,7 @@
- #define KERNEL_DTB() \
- STRUCT_ALIGN(); \
- VMLINUX_SYMBOL(__dtb_start) = .; \
-- *(.dtb.init.rodata) \
-+ KEEP(*(.dtb.init.rodata)) \
- VMLINUX_SYMBOL(__dtb_end) = .;
-
- /* .data section */
-@@ -187,16 +187,17 @@
- /* implement dynamic printk debug */ \
- . = ALIGN(8); \
- VMLINUX_SYMBOL(__start___jump_table) = .; \
-- *(__jump_table) \
-+ KEEP(*(__jump_table)) \
- VMLINUX_SYMBOL(__stop___jump_table) = .; \
- . = ALIGN(8); \
- VMLINUX_SYMBOL(__start___verbose) = .; \
-- *(__verbose) \
-+ KEEP(*(__verbose)) \
- VMLINUX_SYMBOL(__stop___verbose) = .; \
- LIKELY_PROFILE() \
- BRANCH_PROFILE() \
- TRACE_PRINTKS() \
-- TRACEPOINT_STR()
-+ TRACEPOINT_STR() \
-+ *(.data.[a-zA-Z_]*)
-
- /*
- * Data section helpers
-@@ -250,35 +251,35 @@
- /* PCI quirks */ \
- .pci_fixup : AT(ADDR(.pci_fixup) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__start_pci_fixups_early) = .; \
-- *(.pci_fixup_early) \
-+ KEEP(*(.pci_fixup_early)) \
- VMLINUX_SYMBOL(__end_pci_fixups_early) = .; \
- VMLINUX_SYMBOL(__start_pci_fixups_header) = .; \
-- *(.pci_fixup_header) \
-+ KEEP(*(.pci_fixup_header)) \
- VMLINUX_SYMBOL(__end_pci_fixups_header) = .; \
- VMLINUX_SYMBOL(__start_pci_fixups_final) = .; \
-- *(.pci_fixup_final) \
-+ KEEP(*(.pci_fixup_final)) \
- VMLINUX_SYMBOL(__end_pci_fixups_final) = .; \
- VMLINUX_SYMBOL(__start_pci_fixups_enable) = .; \
-- *(.pci_fixup_enable) \
-+ KEEP(*(.pci_fixup_enable)) \
- VMLINUX_SYMBOL(__end_pci_fixups_enable) = .; \
- VMLINUX_SYMBOL(__start_pci_fixups_resume) = .; \
-- *(.pci_fixup_resume) \
-+ KEEP(*(.pci_fixup_resume)) \
- VMLINUX_SYMBOL(__end_pci_fixups_resume) = .; \
- VMLINUX_SYMBOL(__start_pci_fixups_resume_early) = .; \
-- *(.pci_fixup_resume_early) \
-+ KEEP(*(.pci_fixup_resume_early)) \
- VMLINUX_SYMBOL(__end_pci_fixups_resume_early) = .; \
- VMLINUX_SYMBOL(__start_pci_fixups_suspend) = .; \
-- *(.pci_fixup_suspend) \
-+ KEEP(*(.pci_fixup_suspend)) \
- VMLINUX_SYMBOL(__end_pci_fixups_suspend) = .; \
- VMLINUX_SYMBOL(__start_pci_fixups_suspend_late) = .; \
-- *(.pci_fixup_suspend_late) \
-+ KEEP(*(.pci_fixup_suspend_late)) \
- VMLINUX_SYMBOL(__end_pci_fixups_suspend_late) = .; \
- } \
- \
- /* Built-in firmware blobs */ \
- .builtin_fw : AT(ADDR(.builtin_fw) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__start_builtin_fw) = .; \
-- *(.builtin_fw) \
-+ KEEP(*(.builtin_fw)) \
- VMLINUX_SYMBOL(__end_builtin_fw) = .; \
- } \
- \
-@@ -287,49 +288,49 @@
- /* Kernel symbol table: Normal symbols */ \
- __ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__start___ksymtab) = .; \
-- *(SORT(___ksymtab+*)) \
-+ KEEP(*(SORT(___ksymtab+*))) \
- VMLINUX_SYMBOL(__stop___ksymtab) = .; \
- } \
- \
- /* Kernel symbol table: GPL-only symbols */ \
- __ksymtab_gpl : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__start___ksymtab_gpl) = .; \
-- *(SORT(___ksymtab_gpl+*)) \
-+ KEEP(*(SORT(___ksymtab_gpl+*))) \
- VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .; \
- } \
- \
- /* Kernel symbol table: Normal unused symbols */ \
- __ksymtab_unused : AT(ADDR(__ksymtab_unused) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__start___ksymtab_unused) = .; \
-- *(SORT(___ksymtab_unused+*)) \
-+ KEEP(*(SORT(___ksymtab_unused+*))) \
- VMLINUX_SYMBOL(__stop___ksymtab_unused) = .; \
- } \
- \
- /* Kernel symbol table: GPL-only unused symbols */ \
- __ksymtab_unused_gpl : AT(ADDR(__ksymtab_unused_gpl) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__start___ksymtab_unused_gpl) = .; \
-- *(SORT(___ksymtab_unused_gpl+*)) \
-+ KEEP(*(SORT(___ksymtab_unused_gpl+*))) \
- VMLINUX_SYMBOL(__stop___ksymtab_unused_gpl) = .; \
- } \
- \
- /* Kernel symbol table: GPL-future-only symbols */ \
- __ksymtab_gpl_future : AT(ADDR(__ksymtab_gpl_future) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__start___ksymtab_gpl_future) = .; \
-- *(SORT(___ksymtab_gpl_future+*)) \
-+ KEEP(*(SORT(___ksymtab_gpl_future+*))) \
- VMLINUX_SYMBOL(__stop___ksymtab_gpl_future) = .; \
- } \
- \
- /* Kernel symbol table: Normal symbols */ \
- __kcrctab : AT(ADDR(__kcrctab) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__start___kcrctab) = .; \
-- *(SORT(___kcrctab+*)) \
-+ KEEP(*(SORT(___kcrctab+*))) \
- VMLINUX_SYMBOL(__stop___kcrctab) = .; \
- } \
- \
- /* Kernel symbol table: GPL-only symbols */ \
- __kcrctab_gpl : AT(ADDR(__kcrctab_gpl) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__start___kcrctab_gpl) = .; \
-- *(SORT(___kcrctab_gpl+*)) \
-+ KEEP(*(SORT(___kcrctab_gpl+*))) \
- VMLINUX_SYMBOL(__stop___kcrctab_gpl) = .; \
- } \
- \
-@@ -343,14 +344,14 @@
- /* Kernel symbol table: GPL-only unused symbols */ \
- __kcrctab_unused_gpl : AT(ADDR(__kcrctab_unused_gpl) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__start___kcrctab_unused_gpl) = .; \
-- *(SORT(___kcrctab_unused_gpl+*)) \
-+ KEEP(*(SORT(___kcrctab_unused_gpl+*))) \
- VMLINUX_SYMBOL(__stop___kcrctab_unused_gpl) = .; \
- } \
- \
- /* Kernel symbol table: GPL-future-only symbols */ \
- __kcrctab_gpl_future : AT(ADDR(__kcrctab_gpl_future) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__start___kcrctab_gpl_future) = .; \
-- *(SORT(___kcrctab_gpl_future+*)) \
-+ KEEP(*(SORT(___kcrctab_gpl_future+*))) \
- VMLINUX_SYMBOL(__stop___kcrctab_gpl_future) = .; \
- } \
- \
-@@ -369,14 +370,14 @@
- /* Built-in module parameters. */ \
- __param : AT(ADDR(__param) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__start___param) = .; \
-- *(__param) \
-+ KEEP(*(__param)) \
- VMLINUX_SYMBOL(__stop___param) = .; \
- } \
- \
- /* Built-in module versions. */ \
- __modver : AT(ADDR(__modver) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__start___modver) = .; \
-- *(__modver) \
-+ KEEP(*(__modver)) \
- VMLINUX_SYMBOL(__stop___modver) = .; \
- . = ALIGN((align)); \
- VMLINUX_SYMBOL(__end_rodata) = .; \
-@@ -432,7 +433,7 @@
- #define ENTRY_TEXT \
- ALIGN_FUNCTION(); \
- VMLINUX_SYMBOL(__entry_text_start) = .; \
-- *(.entry.text) \
-+ KEEP(*(.entry.text)) \
- VMLINUX_SYMBOL(__entry_text_end) = .;
-
- #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-@@ -460,7 +461,7 @@
- . = ALIGN(align); \
- __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__start___ex_table) = .; \
-- *(__ex_table) \
-+ KEEP(*(__ex_table)) \
- VMLINUX_SYMBOL(__stop___ex_table) = .; \
- }
-
-@@ -476,8 +477,8 @@
- #ifdef CONFIG_CONSTRUCTORS
- #define KERNEL_CTORS() . = ALIGN(8); \
- VMLINUX_SYMBOL(__ctors_start) = .; \
-- *(.ctors) \
-- *(.init_array) \
-+ KEEP(*(.ctors)) \
-+ KEEP(*(.init_array)) \
- VMLINUX_SYMBOL(__ctors_end) = .;
- #else
- #define KERNEL_CTORS()
-@@ -525,7 +526,7 @@
- #define SBSS(sbss_align) \
- . = ALIGN(sbss_align); \
- .sbss : AT(ADDR(.sbss) - LOAD_OFFSET) { \
-- *(.sbss) \
-+ *(.sbss .sbss.*) \
- *(.scommon) \
- }
-
-@@ -543,7 +544,7 @@
- BSS_FIRST_SECTIONS \
- *(.bss..page_aligned) \
- *(.dynbss) \
-- *(.bss) \
-+ *(.bss .bss.*) \
- *(COMMON) \
- }
-
-@@ -592,7 +593,7 @@
- . = ALIGN(8); \
- __bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__start___bug_table) = .; \
-- *(__bug_table) \
-+ KEEP(*(__bug_table)) \
- VMLINUX_SYMBOL(__stop___bug_table) = .; \
- }
- #else
-@@ -604,7 +605,7 @@
- . = ALIGN(4); \
- .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__tracedata_start) = .; \
-- *(.tracedata) \
-+ KEEP(*(.tracedata)) \
- VMLINUX_SYMBOL(__tracedata_end) = .; \
- }
- #else
-@@ -621,17 +622,17 @@
- #define INIT_SETUP(initsetup_align) \
- . = ALIGN(initsetup_align); \
- VMLINUX_SYMBOL(__setup_start) = .; \
-- *(.init.setup) \
-+ KEEP(*(.init.setup)) \
- VMLINUX_SYMBOL(__setup_end) = .;
-
- #define INIT_CALLS_LEVEL(level) \
- VMLINUX_SYMBOL(__initcall##level##_start) = .; \
-- *(.initcall##level##.init) \
-- *(.initcall##level##s.init) \
-+ KEEP(*(.initcall##level##.init)) \
-+ KEEP(*(.initcall##level##s.init)) \
-
- #define INIT_CALLS \
- VMLINUX_SYMBOL(__initcall_start) = .; \
-- *(.initcallearly.init) \
-+ KEEP(*(.initcallearly.init)) \
- INIT_CALLS_LEVEL(0) \
- INIT_CALLS_LEVEL(1) \
- INIT_CALLS_LEVEL(2) \
-@@ -645,21 +646,21 @@
-
- #define CON_INITCALL \
- VMLINUX_SYMBOL(__con_initcall_start) = .; \
-- *(.con_initcall.init) \
-+ KEEP(*(.con_initcall.init)) \
- VMLINUX_SYMBOL(__con_initcall_end) = .;
-
- #define SECURITY_INITCALL \
- VMLINUX_SYMBOL(__security_initcall_start) = .; \
-- *(.security_initcall.init) \
-+ KEEP(*(.security_initcall.init)) \
- VMLINUX_SYMBOL(__security_initcall_end) = .;
-
- #ifdef CONFIG_BLK_DEV_INITRD
- #define INIT_RAM_FS \
- . = ALIGN(4); \
- VMLINUX_SYMBOL(__initramfs_start) = .; \
-- *(.init.ramfs) \
-+ KEEP(*(.init.ramfs)) \
- . = ALIGN(8); \
-- *(.init.ramfs.info)
-+ KEEP(*(.init.ramfs.info))
- #else
- #define INIT_RAM_FS
- #endif
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -18,11 +18,16 @@ ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
- LDFLAGS_vmlinux += --be8
- LDFLAGS_MODULE += --be8
- endif
-+LDFLAGS_vmlinux += --gc-sections
-
- OBJCOPYFLAGS :=-O binary -R .comment -S
- GZFLAGS :=-9
- #KBUILD_CFLAGS +=-pipe
-
-+ifndef CONFIG_FUNCTION_TRACER
-+KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections
-+endif
-+
- # Never generate .eh_frame
- KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm)
-
---- a/arch/arm/kernel/vmlinux.lds.S
-+++ b/arch/arm/kernel/vmlinux.lds.S
-@@ -12,13 +12,13 @@
- #define PROC_INFO \
- . = ALIGN(4); \
- VMLINUX_SYMBOL(__proc_info_begin) = .; \
-- *(.proc.info.init) \
-+ KEEP(*(.proc.info.init)) \
- VMLINUX_SYMBOL(__proc_info_end) = .;
-
- #define IDMAP_TEXT \
- ALIGN_FUNCTION(); \
- VMLINUX_SYMBOL(__idmap_text_start) = .; \
-- *(.idmap.text) \
-+ KEEP(*(.idmap.text)) \
- VMLINUX_SYMBOL(__idmap_text_end) = .; \
- . = ALIGN(32); \
- VMLINUX_SYMBOL(__hyp_idmap_text_start) = .; \
-@@ -93,7 +93,7 @@ SECTIONS
- .text : { /* Real text segment */
- _stext = .; /* Text and read-only data */
- __exception_text_start = .;
-- *(.exception.text)
-+ KEEP(*(.exception.text))
- __exception_text_end = .;
- IRQENTRY_TEXT
- TEXT_TEXT
-@@ -118,7 +118,7 @@ SECTIONS
- __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
- __start___ex_table = .;
- #ifdef CONFIG_MMU
-- *(__ex_table)
-+ KEEP(*(__ex_table))
- #endif
- __stop___ex_table = .;
- }
-@@ -130,12 +130,12 @@ SECTIONS
- . = ALIGN(8);
- .ARM.unwind_idx : {
- __start_unwind_idx = .;
-- *(.ARM.exidx*)
-+ KEEP(*(.ARM.exidx*))
- __stop_unwind_idx = .;
- }
- .ARM.unwind_tab : {
- __start_unwind_tab = .;
-- *(.ARM.extab*)
-+ KEEP(*(.ARM.extab*))
- __stop_unwind_tab = .;
- }
- #endif
-@@ -154,14 +154,14 @@ SECTIONS
- */
- __vectors_start = .;
- .vectors 0 : AT(__vectors_start) {
-- *(.vectors)
-+ KEEP(*(.vectors))
- }
- . = __vectors_start + SIZEOF(.vectors);
- __vectors_end = .;
-
- __stubs_start = .;
- .stubs 0x1000 : AT(__stubs_start) {
-- *(.stubs)
-+ KEEP(*(.stubs))
- }
- . = __stubs_start + SIZEOF(.stubs);
- __stubs_end = .;
-@@ -175,24 +175,24 @@ SECTIONS
- }
- .init.arch.info : {
- __arch_info_begin = .;
-- *(.arch.info.init)
-+ KEEP(*(.arch.info.init))
- __arch_info_end = .;
- }
- .init.tagtable : {
- __tagtable_begin = .;
-- *(.taglist.init)
-+ KEEP(*(.taglist.init))
- __tagtable_end = .;
- }
- #ifdef CONFIG_SMP_ON_UP
- .init.smpalt : {
- __smpalt_begin = .;
-- *(.alt.smp.init)
-+ KEEP(*(.alt.smp.init))
- __smpalt_end = .;
- }
- #endif
- .init.pv_table : {
- __pv_table_begin = .;
-- *(.pv_table)
-+ KEEP(*(.pv_table))
- __pv_table_end = .;
- }
- .init.data : {
---- a/arch/arm/boot/compressed/Makefile
-+++ b/arch/arm/boot/compressed/Makefile
-@@ -122,6 +122,7 @@ ifeq ($(CONFIG_FUNCTION_TRACER),y)
- ORIG_CFLAGS := $(KBUILD_CFLAGS)
- KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
- endif
-+KBUILD_CFLAGS_KERNEL := $(patsubst -f%-sections,,$(KBUILD_CFLAGS_KERNEL))
-
- ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
- asflags-y := -DZIMAGE
+++ /dev/null
---- a/include/asm-generic/vmlinux.lds.h
-+++ b/include/asm-generic/vmlinux.lds.h
-@@ -54,6 +54,16 @@
- #define LOAD_OFFSET 0
- #endif
-
-+#ifndef SYMTAB_KEEP
-+#define SYMTAB_KEEP KEEP(*(SORT(___ksymtab+*)))
-+#define SYMTAB_KEEP_GPL KEEP(*(SORT(___ksymtab_gpl+*)))
-+#endif
-+
-+#ifndef SYMTAB_DISCARD
-+#define SYMTAB_DISCARD
-+#define SYMTAB_DISCARD_GPL
-+#endif
-+
- #include <linux/export.h>
-
- /* Align . to a 8 byte boundary equals to maximum function alignment. */
-@@ -288,14 +298,14 @@
- /* Kernel symbol table: Normal symbols */ \
- __ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__start___ksymtab) = .; \
-- KEEP(*(SORT(___ksymtab+*))) \
-+ SYMTAB_KEEP \
- VMLINUX_SYMBOL(__stop___ksymtab) = .; \
- } \
- \
- /* Kernel symbol table: GPL-only symbols */ \
- __ksymtab_gpl : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) { \
- VMLINUX_SYMBOL(__start___ksymtab_gpl) = .; \
-- KEEP(*(SORT(___ksymtab_gpl+*))) \
-+ SYMTAB_KEEP_GPL \
- VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .; \
- } \
- \
-@@ -357,7 +367,7 @@
- \
- /* Kernel symbol table: strings */ \
- __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) { \
-- *(__ksymtab_strings) \
-+ *(__ksymtab_strings+*) \
- } \
- \
- /* __*init sections */ \
-@@ -679,6 +689,8 @@
- EXIT_TEXT \
- EXIT_DATA \
- EXIT_CALL \
-+ SYMTAB_DISCARD \
-+ SYMTAB_DISCARD_GPL \
- *(.discard) \
- *(.discard.*) \
- }
---- a/scripts/Makefile.build
-+++ b/scripts/Makefile.build
-@@ -298,7 +298,7 @@ targets += $(extra-y) $(MAKECMDGOALS) $(
- # Linker scripts preprocessor (.lds.S -> .lds)
- # ---------------------------------------------------------------------------
- quiet_cmd_cpp_lds_S = LDS $@
-- cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -C -U$(ARCH) \
-+ cmd_cpp_lds_S = $(CPP) $(EXTRA_LDSFLAGS) $(cpp_flags) -P -C -U$(ARCH) \
- -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
-
- $(obj)/%.lds: $(src)/%.lds.S FORCE
---- a/include/linux/export.h
-+++ b/include/linux/export.h
-@@ -52,12 +52,19 @@ extern struct module __this_module;
- #define __CRC_SYMBOL(sym, sec)
- #endif
-
-+#ifdef MODULE
-+#define __EXPORT_SUFFIX(sym)
-+#else
-+#define __EXPORT_SUFFIX(sym) "+" #sym
-+#endif
-+
- /* For every exported symbol, place a struct in the __ksymtab section */
- #define __EXPORT_SYMBOL(sym, sec) \
- extern typeof(sym) sym; \
- __CRC_SYMBOL(sym, sec) \
- static const char __kstrtab_##sym[] \
-- __attribute__((section("__ksymtab_strings"), aligned(1))) \
-+ __attribute__((section("__ksymtab_strings" \
-+ __EXPORT_SUFFIX(sym)), aligned(1))) \
- = VMLINUX_SYMBOL_STR(sym); \
- extern const struct kernel_symbol __ksymtab_##sym; \
- __visible const struct kernel_symbol __ksymtab_##sym \
+++ /dev/null
---- a/scripts/Makefile.lib
-+++ b/scripts/Makefile.lib
-@@ -325,7 +325,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^)
-
- quiet_cmd_lzma = LZMA $@
- cmd_lzma = (cat $(filter-out FORCE,$^) | \
-- lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
-+ lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
- (rm -f $@ ; false)
-
- quiet_cmd_lzo = LZO $@
---- a/scripts/gen_initramfs_list.sh
-+++ b/scripts/gen_initramfs_list.sh
-@@ -226,7 +226,7 @@ cpio_list=
- output="/dev/stdout"
- output_file=""
- is_cpio_compressed=
--compr="gzip -n -9 -f"
-+compr="gzip -n -9 -f -"
-
- arg="$1"
- case "$arg" in
-@@ -242,13 +242,13 @@ case "$arg" in
- output=${cpio_list}
- echo "$output_file" | grep -q "\.gz$" \
- && [ -x "`which gzip 2> /dev/null`" ] \
-- && compr="gzip -n -9 -f"
-+ && compr="gzip -n -9 -f -"
- echo "$output_file" | grep -q "\.bz2$" \
- && [ -x "`which bzip2 2> /dev/null`" ] \
-- && compr="bzip2 -9 -f"
-+ && compr="bzip2 -9 -f -"
- echo "$output_file" | grep -q "\.lzma$" \
- && [ -x "`which lzma 2> /dev/null`" ] \
-- && compr="lzma -9 -f"
-+ && compr="lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so"
- echo "$output_file" | grep -q "\.xz$" \
- && [ -x "`which xz 2> /dev/null`" ] \
- && compr="xz --check=crc32 --lzma2=dict=1MiB"
-@@ -315,7 +315,7 @@ if [ ! -z ${output_file} ]; then
- if [ "${is_cpio_compressed}" = "compressed" ]; then
- cat ${cpio_tfile} > ${output_file}
- else
-- (cat ${cpio_tfile} | ${compr} - > ${output_file}) \
-+ (cat ${cpio_tfile} | ${compr} > ${output_file}) \
- || (rm -f ${output_file} ; false)
- fi
- [ -z ${cpio_file} ] && rm ${cpio_tfile}
---- a/lib/decompress.c
-+++ b/lib/decompress.c
-@@ -48,6 +48,7 @@ static const struct compress_format comp
- { {037, 0236}, "gzip", gunzip },
- { {0x42, 0x5a}, "bzip2", bunzip2 },
- { {0x5d, 0x00}, "lzma", unlzma },
-+ { {0x6d, 0x00}, "lzma-openwrt", unlzma },
- { {0xfd, 0x37}, "xz", unxz },
- { {0x89, 0x4c}, "lzo", unlzo },
- { {0x02, 0x21}, "lz4", unlz4 },
+++ /dev/null
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -210,7 +210,6 @@ config NF_CONNTRACK_FTP
-
- config NF_CONNTRACK_H323
- tristate "H.323 protocol support"
-- depends on (IPV6 || IPV6=n)
- depends on NETFILTER_ADVANCED
- help
- H.323 is a VoIP signalling protocol from ITU-T. As one of the most
-@@ -907,7 +906,6 @@ config NETFILTER_XT_TARGET_SECMARK
-
- config NETFILTER_XT_TARGET_TCPMSS
- tristate '"TCPMSS" target support'
-- depends on (IPV6 || IPV6=n)
- default m if NETFILTER_ADVANCED=n
- ---help---
- This option adds a `TCPMSS' target, which allows you to alter the
+++ /dev/null
---- a/sound/core/Kconfig
-+++ b/sound/core/Kconfig
-@@ -10,13 +10,13 @@ config SND_DMAENGINE_PCM
- tristate
-
- config SND_HWDEP
-- tristate
-+ tristate "Sound hardware support"
-
- config SND_RAWMIDI
- tristate
-
- config SND_COMPRESS_OFFLOAD
-- tristate
-+ tristate "Compression offloading support"
-
- # To be effective this also requires INPUT - users should say:
- # select SND_JACK if INPUT=y || INPUT=SND
+++ /dev/null
---- a/drivers/crypto/Kconfig
-+++ b/drivers/crypto/Kconfig
-@@ -164,6 +164,7 @@ config CRYPTO_DEV_MV_CESA
- depends on PLAT_ORION
- select CRYPTO_ALGAPI
- select CRYPTO_AES
-+ select CRYPTO_HASH2
- select CRYPTO_BLKCIPHER2
- select CRYPTO_HASH
- help
+++ /dev/null
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -29,6 +29,7 @@ config SSB_SPROM
- config SSB_BLOCKIO
- bool
- depends on SSB
-+ default y
-
- config SSB_PCIHOST_POSSIBLE
- bool
-@@ -49,7 +50,7 @@ config SSB_PCIHOST
- config SSB_B43_PCI_BRIDGE
- bool
- depends on SSB_PCIHOST
-- default n
-+ default y
-
- config SSB_PCMCIAHOST_POSSIBLE
- bool
---- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -17,6 +17,7 @@ config BCMA
- config BCMA_BLOCKIO
- bool
- depends on BCMA
-+ default y
-
- config BCMA_HOST_PCI_POSSIBLE
- bool
+++ /dev/null
---- a/lib/Kconfig
-+++ b/lib/Kconfig
-@@ -320,16 +320,16 @@ config BCH_CONST_T
- # Textsearch support is select'ed if needed
- #
- config TEXTSEARCH
-- boolean
-+ boolean "Textsearch support"
-
- config TEXTSEARCH_KMP
-- tristate
-+ tristate "Textsearch KMP"
-
- config TEXTSEARCH_BM
-- tristate
-+ tristate "Textsearch BM"
-
- config TEXTSEARCH_FSM
-- tristate
-+ tristate "Textsearch FSM"
-
- config BTREE
- boolean
+++ /dev/null
---- a/net/wireless/Kconfig
-+++ b/net/wireless/Kconfig
-@@ -183,7 +183,7 @@ config CFG80211_WEXT
- extensions with cfg80211-based drivers.
-
- config LIB80211
-- tristate
-+ tristate "LIB80211"
- default n
- help
- This options enables a library of common routines used
-@@ -192,13 +192,16 @@ config LIB80211
- Drivers should select this themselves if needed.
-
- config LIB80211_CRYPT_WEP
-- tristate
-+ tristate "LIB80211_CRYPT_WEP"
-+ select LIB80211
-
- config LIB80211_CRYPT_CCMP
-- tristate
-+ tristate "LIB80211_CRYPT_CCMP"
-+ select LIB80211
-
- config LIB80211_CRYPT_TKIP
-- tristate
-+ tristate "LIB80211_CRYPT_TKIP"
-+ select LIB80211
-
- config LIB80211_DEBUG
- bool "lib80211 debugging messages"
+++ /dev/null
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -32,7 +32,7 @@ config CRYPTO_FIPS
- this is.
-
- config CRYPTO_ALGAPI
-- tristate
-+ tristate "ALGAPI"
- select CRYPTO_ALGAPI2
- help
- This option provides the API for cryptographic algorithms.
-@@ -41,7 +41,7 @@ config CRYPTO_ALGAPI2
- tristate
-
- config CRYPTO_AEAD
-- tristate
-+ tristate "AEAD"
- select CRYPTO_AEAD2
- select CRYPTO_ALGAPI
-
-@@ -50,7 +50,7 @@ config CRYPTO_AEAD2
- select CRYPTO_ALGAPI2
-
- config CRYPTO_BLKCIPHER
-- tristate
-+ tristate "BLKCIPHER"
- select CRYPTO_BLKCIPHER2
- select CRYPTO_ALGAPI
-
-@@ -61,7 +61,7 @@ config CRYPTO_BLKCIPHER2
- select CRYPTO_WORKQUEUE
-
- config CRYPTO_HASH
-- tristate
-+ tristate "HASH"
- select CRYPTO_HASH2
- select CRYPTO_ALGAPI
-
-@@ -70,7 +70,7 @@ config CRYPTO_HASH2
- select CRYPTO_ALGAPI2
-
- config CRYPTO_RNG
-- tristate
-+ tristate "RNG"
- select CRYPTO_RNG2
- select CRYPTO_ALGAPI
-
+++ /dev/null
---- a/net/wireless/Kconfig
-+++ b/net/wireless/Kconfig
-@@ -1,5 +1,5 @@
- config WIRELESS_EXT
-- bool
-+ bool "Wireless extensions"
-
- config WEXT_CORE
- def_bool y
-@@ -11,10 +11,10 @@ config WEXT_PROC
- depends on WEXT_CORE
-
- config WEXT_SPY
-- bool
-+ bool "WEXT_SPY"
-
- config WEXT_PRIV
-- bool
-+ bool "WEXT_PRIV"
-
- config CFG80211
- tristate "cfg80211 - wireless configuration API"
+++ /dev/null
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -2,7 +2,7 @@ menu "Core Netfilter Configuration"
- depends on NET && INET && NETFILTER
-
- config NETFILTER_NETLINK
-- tristate
-+ tristate "Netfilter NFNETLINK interface"
-
- config NETFILTER_NETLINK_ACCT
- tristate "Netfilter NFACCT over NFNETLINK interface"
+++ /dev/null
---- a/drivers/base/regmap/Kconfig
-+++ b/drivers/base/regmap/Kconfig
-@@ -3,9 +3,8 @@
- # subsystems should select the appropriate symbols.
-
- config REGMAP
-- default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_MMIO || REGMAP_IRQ)
- select IRQ_DOMAIN if REGMAP_IRQ
-- bool
-+ tristate "Regmap"
-
- config REGCACHE_COMPRESSED
- select LZO_COMPRESS
-@@ -13,19 +12,25 @@ config REGCACHE_COMPRESSED
- bool
-
- config REGMAP_I2C
-- tristate
-+ tristate "Regmap I2C"
-+ select REGMAP
- depends on I2C
-
- config REGMAP_SPI
-- tristate
-+ tristate "Regmap SPI"
-+ select REGMAP
-+ depends on SPI_MASTER
- depends on SPI
-
- config REGMAP_SPMI
-+ select REGMAP
- tristate
- depends on SPMI
-
- config REGMAP_MMIO
-- tristate
-+ tristate "Regmap MMIO"
-+ select REGMAP
-
- config REGMAP_IRQ
-+ select REGMAP
- bool
---- a/include/linux/regmap.h
-+++ b/include/linux/regmap.h
-@@ -49,7 +49,7 @@ struct reg_default {
- unsigned int def;
- };
-
--#ifdef CONFIG_REGMAP
-+#if IS_ENABLED(CONFIG_REGMAP)
-
- enum regmap_endian {
- /* Unspecified -> 0 -> Backwards compatible default */
---- a/drivers/base/regmap/Makefile
-+++ b/drivers/base/regmap/Makefile
-@@ -1,7 +1,11 @@
--obj-$(CONFIG_REGMAP) += regmap.o regcache.o
--obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-flat.o
--obj-$(CONFIG_REGCACHE_COMPRESSED) += regcache-lzo.o
--obj-$(CONFIG_DEBUG_FS) += regmap-debugfs.o
-+regmap-core-objs = regmap.o regcache.o regcache-rbtree.o regcache-flat.o
-+ifdef CONFIG_DEBUG_FS
-+regmap-core-objs += regmap-debugfs.o
-+endif
-+ifdef CONFIG_REGCACHE_COMPRESSED
-+regmap-core-objs += regcache-lzo.o
-+endif
-+obj-$(CONFIG_REGMAP) += regmap-core.o
- obj-$(CONFIG_REGMAP_I2C) += regmap-i2c.o
- obj-$(CONFIG_REGMAP_SPI) += regmap-spi.o
- obj-$(CONFIG_REGMAP_SPMI) += regmap-spmi.o
---- a/drivers/base/regmap/regmap.c
-+++ b/drivers/base/regmap/regmap.c
-@@ -13,6 +13,7 @@
- #include <linux/device.h>
- #include <linux/slab.h>
- #include <linux/export.h>
-+#include <linux/module.h>
- #include <linux/mutex.h>
- #include <linux/err.h>
- #include <linux/of.h>
-@@ -2630,3 +2631,5 @@ static int __init regmap_initcall(void)
- return 0;
- }
- postcore_initcall(regmap_initcall);
-+
-+MODULE_LICENSE("GPL");
+++ /dev/null
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -96,10 +96,10 @@ config CRYPTO_MANAGER
-
- config CRYPTO_MANAGER2
- def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y)
-- select CRYPTO_AEAD2
-- select CRYPTO_HASH2
-- select CRYPTO_BLKCIPHER2
-- select CRYPTO_PCOMP2
-+ select CRYPTO_AEAD2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+ select CRYPTO_HASH2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+ select CRYPTO_BLKCIPHER2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+ select CRYPTO_PCOMP2 if !CRYPTO_MANAGER_DISABLE_TESTS
-
- config CRYPTO_USER
- tristate "Userspace cryptographic algorithm configuration"
---- a/crypto/algboss.c
-+++ b/crypto/algboss.c
-@@ -248,6 +248,9 @@ static int cryptomgr_schedule_test(struc
- type = alg->cra_flags;
-
- /* This piece of crap needs to disappear into per-type test hooks. */
-+#ifdef CONFIG_CRYPTO_MANAGER_DISABLE_TESTS
-+ type |= CRYPTO_ALG_TESTED;
-+#else
- if ((!((type ^ CRYPTO_ALG_TYPE_BLKCIPHER) &
- CRYPTO_ALG_TYPE_BLKCIPHER_MASK) && !(type & CRYPTO_ALG_GENIV) &&
- ((alg->cra_flags & CRYPTO_ALG_TYPE_MASK) ==
-@@ -256,6 +259,7 @@ static int cryptomgr_schedule_test(struc
- (!((type ^ CRYPTO_ALG_TYPE_AEAD) & CRYPTO_ALG_TYPE_MASK) &&
- alg->cra_type == &crypto_nivaead_type && alg->cra_aead.ivsize))
- type |= CRYPTO_ALG_TESTED;
-+#endif
-
- param->type = type;
-
+++ /dev/null
-From c6bdd0d302119819de72439972d0462c26ef9eda Mon Sep 17 00:00:00 2001
-From: Felix Janda <felix.janda@posteo.de>
-Date: Sun, 12 Nov 2017 13:30:17 -0500
-Subject: uapi libc compat: add fallback for unsupported libcs
-
-libc-compat.h aims to prevent symbol collisions between uapi and libc
-headers for each supported libc. This requires continuous coordination
-between them.
-
-The goal of this commit is to improve the situation for libcs (such as
-musl) which are not yet supported and/or do not wish to be explicitly
-supported, while not affecting supported libcs. More precisely, with
-this commit, unsupported libcs can request the suppression of any
-specific uapi definition by defining the correspondings _UAPI_DEF_*
-macro as 0. This can fix symbol collisions for them, as long as the
-libc headers are included before the uapi headers. Inclusion in the
-other order is outside the scope of this commit.
-
-All infrastructure in order to enable this fallback for unsupported
-libcs is already in place, except that libc-compat.h unconditionally
-defines all _UAPI_DEF_* macros to 1 for all unsupported libcs so that
-any previous definitions are ignored. In order to fix this, this commit
-merely makes these definitions conditional.
-
-This commit together with the musl libc commit
-
-http://git.musl-libc.org/cgit/musl/commit/?id=04983f2272382af92eb8f8838964ff944fbb8258
-
-fixes for example the following compiler errors when <linux/in6.h> is
-included after musl's <netinet/in.h>:
-
-./linux/in6.h:32:8: error: redefinition of 'struct in6_addr'
-./linux/in6.h:49:8: error: redefinition of 'struct sockaddr_in6'
-./linux/in6.h:59:8: error: redefinition of 'struct ipv6_mreq'
-
-The comments referencing glibc are still correct, but this file is not
-only used for glibc any more.
-
-Signed-off-by: Felix Janda <felix.janda@posteo.de>
-Reviewed-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- include/uapi/linux/libc-compat.h | 55 +++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 54 insertions(+), 1 deletion(-)
-
---- a/include/uapi/linux/libc-compat.h
-+++ b/include/uapi/linux/libc-compat.h
-@@ -110,27 +110,54 @@
-
- /* If we did not see any headers from any supported C libraries,
- * or we are being included in the kernel, then define everything
-- * that we need. */
-+ * that we need. Check for previous __UAPI_* definitions to give
-+ * unsupported C libraries a way to opt out of any kernel definition. */
- #else /* !defined(__GLIBC__) */
-
- /* Definitions for in.h */
-+#ifndef __UAPI_DEF_IN_ADDR
- #define __UAPI_DEF_IN_ADDR 1
-+#endif
-+#ifndef __UAPI_DEF_IN_IPPROTO
- #define __UAPI_DEF_IN_IPPROTO 1
-+#endif
-+#ifndef __UAPI_DEF_IN_PKTINFO
- #define __UAPI_DEF_IN_PKTINFO 1
-+#endif
-+#ifndef __UAPI_DEF_IP_MREQ
- #define __UAPI_DEF_IP_MREQ 1
-+#endif
-+#ifndef __UAPI_DEF_SOCKADDR_IN
- #define __UAPI_DEF_SOCKADDR_IN 1
-+#endif
-+#ifndef __UAPI_DEF_IN_CLASS
- #define __UAPI_DEF_IN_CLASS 1
-+#endif
-
- /* Definitions for in6.h */
-+#ifndef __UAPI_DEF_IN6_ADDR
- #define __UAPI_DEF_IN6_ADDR 1
-+#endif
-+#ifndef __UAPI_DEF_IN6_ADDR_ALT
- #define __UAPI_DEF_IN6_ADDR_ALT 1
-+#endif
-+#ifndef __UAPI_DEF_SOCKADDR_IN6
- #define __UAPI_DEF_SOCKADDR_IN6 1
-+#endif
-+#ifndef __UAPI_DEF_IPV6_MREQ
- #define __UAPI_DEF_IPV6_MREQ 1
-+#endif
-+#ifndef __UAPI_DEF_IPPROTO_V6
- #define __UAPI_DEF_IPPROTO_V6 1
-+#endif
-+#ifndef __UAPI_DEF_IPV6_OPTIONS
- #define __UAPI_DEF_IPV6_OPTIONS 1
-+#endif
-
- /* Definitions for xattr.h */
-+#ifndef __UAPI_DEF_XATTR
- #define __UAPI_DEF_XATTR 1
-+#endif
-
- #endif /* __GLIBC__ */
-
+++ /dev/null
-From 649affd04813c43e0a72886517fcfccd63230981 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Mon, 29 Jun 2015 16:53:03 +0200
-Subject: uapi/if_ether.h: prevent redefinition of struct ethhdr
-
-Musl provides its own ethhdr struct definition. Add a guard to prevent
-its definition of the appropriate musl header has already been included.
-
-glibc does not implement this header, but when glibc will implement this
-they can just define __UAPI_DEF_ETHHDR 0 to make it work with the
-kernel.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- include/uapi/linux/if_ether.h | 3 +++
- include/uapi/linux/libc-compat.h | 6 ++++++
- 2 files changed, 9 insertions(+)
-
---- a/include/uapi/linux/if_ether.h
-+++ b/include/uapi/linux/if_ether.h
-@@ -22,6 +22,7 @@
- #define _UAPI_LINUX_IF_ETHER_H
-
- #include <linux/types.h>
-+#include <linux/libc-compat.h>
-
- /*
- * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble
-@@ -134,11 +135,13 @@
- * This is an Ethernet frame header.
- */
-
-+#if __UAPI_DEF_ETHHDR
- struct ethhdr {
- unsigned char h_dest[ETH_ALEN]; /* destination eth addr */
- unsigned char h_source[ETH_ALEN]; /* source ether addr */
- __be16 h_proto; /* packet type ID field */
- } __attribute__((packed));
-+#endif
-
-
- #endif /* _UAPI_LINUX_IF_ETHER_H */
---- a/include/uapi/linux/libc-compat.h
-+++ b/include/uapi/linux/libc-compat.h
-@@ -161,4 +161,10 @@
-
- #endif /* __GLIBC__ */
-
-+/* Definitions for if_ether.h */
-+/* allow libcs like musl to deactivate this, glibc does not implement this. */
-+#ifndef __UAPI_DEF_ETHHDR
-+#define __UAPI_DEF_ETHHDR 1
-+#endif
-+
- #endif /* _UAPI_LIBC_COMPAT_H */
+++ /dev/null
-From: Mark Miller <mark@mirell.org>
-
-This exposes the CONFIG_BOOT_RAW symbol in Kconfig. This is needed on
-certain Broadcom chipsets running CFE in order to load the kernel.
-
-Signed-off-by: Mark Miller <mark@mirell.org>
-Acked-by: Rob Landley <rob@landley.net>
----
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -892,9 +892,6 @@ config FW_ARC
- config ARCH_MAY_HAVE_PC_FDC
- bool
-
--config BOOT_RAW
-- bool
--
- config CEVT_BCM1480
- bool
-
-@@ -2503,6 +2500,18 @@ config USE_OF
- config BUILTIN_DTB
- bool
-
-+config BOOT_RAW
-+ bool "Enable the kernel to be executed from the load address"
-+ default n
-+ help
-+ Allow the kernel to be executed from the load address for
-+ bootloaders which cannot read the ELF format. This places
-+ a jump to start_kernel at the load address.
-+
-+ If unsure, say N.
-+
-+
-+
- endmenu
-
- config LOCKDEP_SUPPORT
+++ /dev/null
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -988,6 +988,10 @@ config SYNC_R4K
- config MIPS_MACHINE
- def_bool n
-
-+config IMAGE_CMDLINE_HACK
-+ bool "OpenWrt specific image command line hack"
-+ default n
-+
- config NO_IOPORT_MAP
- def_bool n
-
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -80,6 +80,12 @@ FEXPORT(__kernel_entry)
- j kernel_entry
- #endif
-
-+#ifdef CONFIG_IMAGE_CMDLINE_HACK
-+ .ascii "CMDLINE:"
-+EXPORT(__image_cmdline)
-+ .fill 0x400
-+#endif /* CONFIG_IMAGE_CMDLINE_HACK */
-+
- __REF
-
- NESTED(kernel_entry, 16, sp) # kernel entry point
+++ /dev/null
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -87,7 +87,7 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
- # machines may also. Since BFD is incredibly buggy with respect to
- # crossformat linking we rely on the elf2ecoff tool for format conversion.
- #
--cflags-y += -G 0 -mno-abicalls -fno-pic -pipe
-+cflags-y += -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely
- cflags-y += -msoft-float
- LDFLAGS_vmlinux += -G 0 -static -n -nostdlib --gc-sections
- KBUILD_AFLAGS_MODULE += -mlong-calls
+++ /dev/null
-From: Manuel Lauss <manuel.lauss@gmail.com>
-Subject: [RFC PATCH v4 2/2] MIPS: make FPU emulator optional
-Date: Mon, 7 Apr 2014 12:57:04 +0200
-Message-Id: <1396868224-252888-2-git-send-email-manuel.lauss@gmail.com>
-
-This small patch makes the MIPS FPU emulator optional. The kernel
-kills float-users on systems without a hardware FPU by sending a SIGILL.
-
-Disabling the emulator shrinks vmlinux by about 54kBytes (32bit,
-optimizing for size).
-
-Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
----
-v4: rediffed because of patch 1/2, should now work with micromips as well
-v3: updated patch description with size savings.
-v2: incorporated changes suggested by Jonas Gorski
- force the fpu emulator on for micromips: relocating the parts
- of the mmips code in the emulator to other areas would be a
- much larger change; I went the cheap route instead with this.
-
- arch/mips/Kbuild | 2 +-
- arch/mips/Kconfig | 14 ++++++++++++++
- arch/mips/include/asm/fpu.h | 5 +++--
- arch/mips/include/asm/fpu_emulator.h | 15 +++++++++++++++
- 4 files changed, 33 insertions(+), 3 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -2495,6 +2495,20 @@ config MIPS_O32_FP64_SUPPORT
-
- If unsure, say N.
-
-+config MIPS_FPU_EMULATOR
-+ bool "MIPS FPU Emulator"
-+ default y
-+ help
-+ This option lets you disable the built-in MIPS FPU (Coprocessor 1)
-+ emulator, which handles floating-point instructions on processors
-+ without a hardware FPU. It is generally a good idea to keep the
-+ emulator built-in, unless you are perfectly sure you have a
-+ complete soft-float environment. With the emulator disabled, all
-+ users of float operations will be killed with an illegal instr-
-+ uction exception.
-+
-+ Say Y, please.
-+
- config USE_OF
- bool
- select OF
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -275,7 +275,7 @@ OBJCOPYFLAGS += --remove-section=.regin
- head-y := arch/mips/kernel/head.o
-
- libs-y += arch/mips/lib/
--libs-y += arch/mips/math-emu/
-+libs-$(CONFIG_MIPS_FPU_EMULATOR) += arch/mips/math-emu/
-
- # See arch/mips/Kbuild for content of core part of the kernel
- core-y += arch/mips/
---- a/arch/mips/include/asm/fpu.h
-+++ b/arch/mips/include/asm/fpu.h
-@@ -169,8 +169,10 @@ static inline int init_fpu(void)
- ret = __own_fpu();
- if (!ret)
- _init_fpu();
-- } else
-+ } else if (IS_ENABLED(CONFIG_MIPS_FPU_EMULATOR))
- fpu_emulator_init_fpu();
-+ else
-+ ret = SIGILL;
-
- return ret;
- }
---- a/arch/mips/include/asm/fpu_emulator.h
-+++ b/arch/mips/include/asm/fpu_emulator.h
-@@ -30,6 +30,7 @@
- #include <asm/local.h>
- #include <asm/processor.h>
-
-+#ifdef CONFIG_MIPS_FPU_EMULATOR
- #ifdef CONFIG_DEBUG_FS
-
- struct mips_fpu_emulator_stats {
-@@ -65,6 +66,20 @@ extern int do_dsemulret(struct pt_regs *
- extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
- struct mips_fpu_struct *ctx, int has_fpu,
- void *__user *fault_addr);
-+#else /* no CONFIG_MIPS_FPU_EMULATOR */
-+static inline int do_dsemulret(struct pt_regs *xcp)
-+{
-+ return 0; /* 0 means error, should never get here anyway */
-+}
-+
-+static inline int fpu_emulator_cop1Handler(struct pt_regs *xcp,
-+ struct mips_fpu_struct *ctx, int has_fpu,
-+ void *__user *fault_addr)
-+{
-+ return SIGILL; /* we don't speak MIPS FPU */
-+}
-+#endif /* CONFIG_MIPS_FPU_EMULATOR */
-+
- int process_fpemu_return(int sig, void __user *fault_addr);
- int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
- unsigned long *contpc);
+++ /dev/null
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -90,8 +90,13 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
- cflags-y += -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely
- cflags-y += -msoft-float
- LDFLAGS_vmlinux += -G 0 -static -n -nostdlib --gc-sections
-+ifdef CONFIG_64BIT
- KBUILD_AFLAGS_MODULE += -mlong-calls
- KBUILD_CFLAGS_MODULE += -mlong-calls
-+else
-+KBUILD_AFLAGS_MODULE += -mno-long-calls
-+KBUILD_CFLAGS_MODULE += -mno-long-calls
-+endif
-
- ifndef CONFIG_FUNCTION_TRACER
- KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections
---- a/arch/mips/include/asm/module.h
-+++ b/arch/mips/include/asm/module.h
-@@ -11,6 +11,11 @@ struct mod_arch_specific {
- const struct exception_table_entry *dbe_start;
- const struct exception_table_entry *dbe_end;
- struct mips_hi16 *r_mips_hi16_list;
-+
-+ void *phys_plt_tbl;
-+ void *virt_plt_tbl;
-+ unsigned int phys_plt_offset;
-+ unsigned int virt_plt_offset;
- };
-
- typedef uint8_t Elf64_Byte; /* Type for a 8-bit quantity. */
---- a/arch/mips/kernel/module.c
-+++ b/arch/mips/kernel/module.c
-@@ -43,14 +43,222 @@ struct mips_hi16 {
- static LIST_HEAD(dbe_list);
- static DEFINE_SPINLOCK(dbe_lock);
-
--#ifdef MODULE_START
-+/*
-+ * Get the potential max trampolines size required of the init and
-+ * non-init sections. Only used if we cannot find enough contiguous
-+ * physically mapped memory to put the module into.
-+ */
-+static unsigned int
-+get_plt_size(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
-+ const char *secstrings, unsigned int symindex, bool is_init)
-+{
-+ unsigned long ret = 0;
-+ unsigned int i, j;
-+ Elf_Sym *syms;
-+
-+ /* Everything marked ALLOC (this includes the exported symbols) */
-+ for (i = 1; i < hdr->e_shnum; ++i) {
-+ unsigned int info = sechdrs[i].sh_info;
-+
-+ if (sechdrs[i].sh_type != SHT_REL
-+ && sechdrs[i].sh_type != SHT_RELA)
-+ continue;
-+
-+ /* Not a valid relocation section? */
-+ if (info >= hdr->e_shnum)
-+ continue;
-+
-+ /* Don't bother with non-allocated sections */
-+ if (!(sechdrs[info].sh_flags & SHF_ALLOC))
-+ continue;
-+
-+ /* If it's called *.init*, and we're not init, we're
-+ not interested */
-+ if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
-+ != is_init)
-+ continue;
-+
-+ syms = (Elf_Sym *) sechdrs[symindex].sh_addr;
-+ if (sechdrs[i].sh_type == SHT_REL) {
-+ Elf_Mips_Rel *rel = (void *) sechdrs[i].sh_addr;
-+ unsigned int size = sechdrs[i].sh_size / sizeof(*rel);
-+
-+ for (j = 0; j < size; ++j) {
-+ Elf_Sym *sym;
-+
-+ if (ELF_MIPS_R_TYPE(rel[j]) != R_MIPS_26)
-+ continue;
-+
-+ sym = syms + ELF_MIPS_R_SYM(rel[j]);
-+ if (!is_init && sym->st_shndx != SHN_UNDEF)
-+ continue;
-+
-+ ret += 4 * sizeof(int);
-+ }
-+ } else {
-+ Elf_Mips_Rela *rela = (void *) sechdrs[i].sh_addr;
-+ unsigned int size = sechdrs[i].sh_size / sizeof(*rela);
-+
-+ for (j = 0; j < size; ++j) {
-+ Elf_Sym *sym;
-+
-+ if (ELF_MIPS_R_TYPE(rela[j]) != R_MIPS_26)
-+ continue;
-+
-+ sym = syms + ELF_MIPS_R_SYM(rela[j]);
-+ if (!is_init && sym->st_shndx != SHN_UNDEF)
-+ continue;
-+
-+ ret += 4 * sizeof(int);
-+ }
-+ }
-+ }
-+
-+ return ret;
-+}
-+
-+#ifndef MODULE_START
-+static void *alloc_phys(unsigned long size)
-+{
-+ unsigned order;
-+ struct page *page;
-+ struct page *p;
-+
-+ size = PAGE_ALIGN(size);
-+ order = get_order(size);
-+
-+ page = alloc_pages(GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN |
-+ __GFP_THISNODE, order);
-+ if (!page)
-+ return NULL;
-+
-+ split_page(page, order);
-+
-+ for (p = page + (size >> PAGE_SHIFT); p < page + (1 << order); ++p)
-+ __free_page(p);
-+
-+ return page_address(page);
-+}
-+#endif
-+
-+static void free_phys(void *ptr, unsigned long size)
-+{
-+ struct page *page;
-+ struct page *end;
-+
-+ page = virt_to_page(ptr);
-+ end = page + (PAGE_ALIGN(size) >> PAGE_SHIFT);
-+
-+ for (; page < end; ++page)
-+ __free_page(page);
-+}
-+
-+
- void *module_alloc(unsigned long size)
- {
-+#ifdef MODULE_START
- return __vmalloc_node_range(size, 1, MODULE_START, MODULE_END,
- GFP_KERNEL, PAGE_KERNEL, NUMA_NO_NODE,
- __builtin_return_address(0));
-+#else
-+ void *ptr;
-+
-+ if (size == 0)
-+ return NULL;
-+
-+ ptr = alloc_phys(size);
-+
-+ /* If we failed to allocate physically contiguous memory,
-+ * fall back to regular vmalloc. The module loader code will
-+ * create jump tables to handle long jumps */
-+ if (!ptr)
-+ return vmalloc(size);
-+
-+ return ptr;
-+#endif
- }
-+
-+static inline bool is_phys_addr(void *ptr)
-+{
-+#ifdef CONFIG_64BIT
-+ return (KSEGX((unsigned long)ptr) == CKSEG0);
-+#else
-+ return (KSEGX(ptr) == KSEG0);
- #endif
-+}
-+
-+/* Free memory returned from module_alloc */
-+void module_free(struct module *mod, void *module_region)
-+{
-+ if (is_phys_addr(module_region)) {
-+ if (mod->module_init == module_region)
-+ free_phys(module_region, mod->init_size);
-+ else if (mod->module_core == module_region)
-+ free_phys(module_region, mod->core_size);
-+ else
-+ BUG();
-+ } else {
-+ vfree(module_region);
-+ }
-+}
-+
-+static void *__module_alloc(int size, bool phys)
-+{
-+ void *ptr;
-+
-+ if (phys)
-+ ptr = kmalloc(size, GFP_KERNEL);
-+ else
-+ ptr = vmalloc(size);
-+ return ptr;
-+}
-+
-+static void __module_free(void *ptr)
-+{
-+ if (is_phys_addr(ptr))
-+ kfree(ptr);
-+ else
-+ vfree(ptr);
-+}
-+
-+int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
-+ char *secstrings, struct module *mod)
-+{
-+ unsigned int symindex = 0;
-+ unsigned int core_size, init_size;
-+ int i;
-+
-+ mod->arch.phys_plt_offset = 0;
-+ mod->arch.virt_plt_offset = 0;
-+ mod->arch.phys_plt_tbl = NULL;
-+ mod->arch.virt_plt_tbl = NULL;
-+
-+ if (IS_ENABLED(CONFIG_64BIT))
-+ return 0;
-+
-+ for (i = 1; i < hdr->e_shnum; i++)
-+ if (sechdrs[i].sh_type == SHT_SYMTAB)
-+ symindex = i;
-+
-+ core_size = get_plt_size(hdr, sechdrs, secstrings, symindex, false);
-+ init_size = get_plt_size(hdr, sechdrs, secstrings, symindex, true);
-+
-+ if ((core_size + init_size) == 0)
-+ return 0;
-+
-+ mod->arch.phys_plt_tbl = __module_alloc(core_size + init_size, 1);
-+ if (!mod->arch.phys_plt_tbl)
-+ return -ENOMEM;
-+
-+ mod->arch.virt_plt_tbl = __module_alloc(core_size + init_size, 0);
-+ if (!mod->arch.virt_plt_tbl) {
-+ __module_free(mod->arch.phys_plt_tbl);
-+ mod->arch.phys_plt_tbl = NULL;
-+ return -ENOMEM;
-+ }
-+
-+ return 0;
-+}
-
- int apply_r_mips_none(struct module *me, u32 *location, Elf_Addr v)
- {
-@@ -64,8 +272,39 @@ static int apply_r_mips_32_rel(struct mo
- return 0;
- }
-
-+static Elf_Addr add_plt_entry_to(unsigned *plt_offset,
-+ void *start, Elf_Addr v)
-+{
-+ unsigned *tramp = start + *plt_offset;
-+ *plt_offset += 4 * sizeof(int);
-+
-+ /* adjust carry for addiu */
-+ if (v & 0x00008000)
-+ v += 0x10000;
-+
-+ tramp[0] = 0x3c190000 | (v >> 16); /* lui t9, hi16 */
-+ tramp[1] = 0x27390000 | (v & 0xffff); /* addiu t9, t9, lo16 */
-+ tramp[2] = 0x03200008; /* jr t9 */
-+ tramp[3] = 0x00000000; /* nop */
-+
-+ return (Elf_Addr) tramp;
-+}
-+
-+static Elf_Addr add_plt_entry(struct module *me, void *location, Elf_Addr v)
-+{
-+ if (is_phys_addr(location))
-+ return add_plt_entry_to(&me->arch.phys_plt_offset,
-+ me->arch.phys_plt_tbl, v);
-+ else
-+ return add_plt_entry_to(&me->arch.virt_plt_offset,
-+ me->arch.virt_plt_tbl, v);
-+
-+}
-+
- static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
- {
-+ u32 ofs = *location & 0x03ffffff;
-+
- if (v % 4) {
- pr_err("module %s: dangerous R_MIPS_26 REL relocation\n",
- me->name);
-@@ -73,14 +312,17 @@ static int apply_r_mips_26_rel(struct mo
- }
-
- if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
-- printk(KERN_ERR
-- "module %s: relocation overflow\n",
-- me->name);
-- return -ENOEXEC;
-+ v = add_plt_entry(me, location, v + (ofs << 2));
-+ if (!v) {
-+ printk(KERN_ERR
-+ "module %s: relocation overflow\n", me->name);
-+ return -ENOEXEC;
-+ }
-+ ofs = 0;
- }
-
- *location = (*location & ~0x03ffffff) |
-- ((*location + (v >> 2)) & 0x03ffffff);
-+ ((ofs + (v >> 2)) & 0x03ffffff);
-
- return 0;
- }
-@@ -287,9 +529,36 @@ int module_finalize(const Elf_Ehdr *hdr,
- list_add(&me->arch.dbe_list, &dbe_list);
- spin_unlock_irq(&dbe_lock);
- }
-+
-+ /* Get rid of the fixup trampoline if we're running the module
-+ * from physically mapped address space */
-+ if (me->arch.phys_plt_offset == 0) {
-+ __module_free(me->arch.phys_plt_tbl);
-+ me->arch.phys_plt_tbl = NULL;
-+ }
-+ if (me->arch.virt_plt_offset == 0) {
-+ __module_free(me->arch.virt_plt_tbl);
-+ me->arch.virt_plt_tbl = NULL;
-+ }
-+
- return 0;
- }
-
-+void module_arch_freeing_init(struct module *mod)
-+{
-+ if (mod->state == MODULE_STATE_LIVE)
-+ return;
-+
-+ if (mod->arch.phys_plt_tbl) {
-+ __module_free(mod->arch.phys_plt_tbl);
-+ mod->arch.phys_plt_tbl = NULL;
-+ }
-+ if (mod->arch.virt_plt_tbl) {
-+ __module_free(mod->arch.virt_plt_tbl);
-+ mod->arch.virt_plt_tbl = NULL;
-+ }
-+}
-+
- void module_arch_cleanup(struct module *mod)
- {
- spin_lock_irq(&dbe_lock);
+++ /dev/null
---- a/arch/mips/include/asm/string.h
-+++ b/arch/mips/include/asm/string.h
-@@ -133,11 +133,44 @@ strncmp(__const__ char *__cs, __const__
-
- #define __HAVE_ARCH_MEMSET
- extern void *memset(void *__s, int __c, size_t __count);
-+#define memset(__s, __c, len) \
-+({ \
-+ size_t __len = (len); \
-+ void *__ret; \
-+ if (__builtin_constant_p(len) && __len >= 64) \
-+ __ret = memset((__s), (__c), __len); \
-+ else \
-+ __ret = __builtin_memset((__s), (__c), __len); \
-+ __ret; \
-+})
-
- #define __HAVE_ARCH_MEMCPY
- extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
-+#define memcpy(dst, src, len) \
-+({ \
-+ size_t __len = (len); \
-+ void *__ret; \
-+ if (__builtin_constant_p(len) && __len >= 64) \
-+ __ret = memcpy((dst), (src), __len); \
-+ else \
-+ __ret = __builtin_memcpy((dst), (src), __len); \
-+ __ret; \
-+})
-
- #define __HAVE_ARCH_MEMMOVE
- extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
-+#define memmove(dst, src, len) \
-+({ \
-+ size_t __len = (len); \
-+ void *__ret; \
-+ if (__builtin_constant_p(len) && __len >= 64) \
-+ __ret = memmove((dst), (src), __len); \
-+ else \
-+ __ret = __builtin_memmove((dst), (src), __len); \
-+ __ret; \
-+})
-+
-+#define __HAVE_ARCH_MEMCMP
-+#define memcmp(src1, src2, len) __builtin_memcmp((src1), (src2), (len))
-
- #endif /* _ASM_STRING_H */
---- a/arch/mips/lib/Makefile
-+++ b/arch/mips/lib/Makefile
-@@ -4,7 +4,7 @@
-
- lib-y += bitops.o csum_partial.o delay.o memcpy.o memset.o \
- mips-atomic.o strlen_user.o strncpy_user.o \
-- strnlen_user.o uncached.o
-+ strnlen_user.o uncached.o memcmp.o
-
- obj-y += iomap.o
- obj-$(CONFIG_PCI) += iomap-pci.o
---- /dev/null
-+++ b/arch/mips/lib/memcmp.c
-@@ -0,0 +1,22 @@
-+/*
-+ * copied from linux/lib/string.c
-+ *
-+ * Copyright (C) 1991, 1992 Linus Torvalds
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/string.h>
-+
-+#undef memcmp
-+int memcmp(const void *cs, const void *ct, size_t count)
-+{
-+ const unsigned char *su1, *su2;
-+ int res = 0;
-+
-+ for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--)
-+ if ((res = *su1 - *su2) != 0)
-+ break;
-+ return res;
-+}
-+EXPORT_SYMBOL(memcmp);
-+
+++ /dev/null
-Adjust highmem offset to 0x10000000 to ensure that all kmalloc allocations
-stay within the same 256M boundary. This ensures that -mlong-calls is not
-needed on systems with more than 256M RAM.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
---- a/arch/mips/include/asm/mach-generic/spaces.h
-+++ b/arch/mips/include/asm/mach-generic/spaces.h
-@@ -44,7 +44,7 @@
- * Memory above this physical address will be considered highmem.
- */
- #ifndef HIGHMEM_START
--#define HIGHMEM_START _AC(0x20000000, UL)
-+#define HIGHMEM_START _AC(0x10000000, UL)
- #endif
-
- #endif /* CONFIG_32BIT */
+++ /dev/null
---- a/arch/arm/kernel/module.c
-+++ b/arch/arm/kernel/module.c
-@@ -83,6 +83,10 @@ apply_relocate(Elf32_Shdr *sechdrs, cons
- return -ENOEXEC;
- }
-
-+ if ((IS_ERR_VALUE(sym->st_value) || !sym->st_value) &&
-+ ELF_ST_BIND(sym->st_info) == STB_WEAK)
-+ continue;
-+
- loc = dstsec->sh_addr + rel->r_offset;
-
- switch (ELF32_R_TYPE(rel->r_info)) {
+++ /dev/null
-Upstream doesn't optimize the kernel and bootwrappers for ppc44x because
-they still want to support gcc 3.3 -- well, we don't.
-
---- a/arch/powerpc/Makefile
-+++ b/arch/powerpc/Makefile
-@@ -203,7 +203,8 @@ ifeq ($(CONFIG_FUNCTION_TRACER),y)
- KBUILD_CFLAGS += -mno-sched-epilog
- endif
-
--cpu-as-$(CONFIG_4xx) += -Wa,-m405
-+cpu-as-$(CONFIG_40x) += -Wa,-m405
-+cpu-as-$(CONFIG_44x) += -Wa,-m440
- cpu-as-$(CONFIG_ALTIVEC) += -Wa,-maltivec
- cpu-as-$(CONFIG_E200) += -Wa,-me200
-
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -45,10 +45,10 @@ BOOTCFLAGS += -I$(obj) -I$(srctree)/$(ob
- DTC_FLAGS ?= -p 1024
-
- $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
--$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
-+$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440
- $(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405
--$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
--$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
-+$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440
-+$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440
- $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
- $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
- $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
+++ /dev/null
---- a/arch/powerpc/Makefile
-+++ b/arch/powerpc/Makefile
-@@ -165,7 +165,6 @@ CPP = $(CC) -E $(KBUILD_CFLAGS)
-
- CHECKFLAGS += -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__
-
--KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
-
- ifeq ($(CONFIG_476FPE_ERR46),y)
- KBUILD_LDFLAGS_MODULE += --ppc476-workaround \
+++ /dev/null
-From d8582dcf1ed66eee88a11e4760f42c0d6c8822be Mon Sep 17 00:00:00 2001
-From: Yousong Zhou <yszhou4tech@gmail.com>
-Date: Sat, 31 Jan 2015 22:26:03 +0800
-Subject: [PATCH 331/331] MIPS: kexec: Accept command line parameters from
- userspace.
-
-Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
----
- arch/mips/kernel/machine_kexec.c | 153 +++++++++++++++++++++++++++++++-----
- arch/mips/kernel/machine_kexec.h | 20 +++++
- arch/mips/kernel/relocate_kernel.S | 21 +++--
- 3 files changed, 167 insertions(+), 27 deletions(-)
- create mode 100644 arch/mips/kernel/machine_kexec.h
-
---- a/arch/mips/kernel/machine_kexec.c
-+++ b/arch/mips/kernel/machine_kexec.c
-@@ -10,45 +10,145 @@
- #include <linux/mm.h>
- #include <linux/delay.h>
-
-+#include <asm/bootinfo.h>
- #include <asm/cacheflush.h>
- #include <asm/page.h>
--
--extern const unsigned char relocate_new_kernel[];
--extern const size_t relocate_new_kernel_size;
--
--extern unsigned long kexec_start_address;
--extern unsigned long kexec_indirection_page;
-+#include <asm/uaccess.h>
-+#include "machine_kexec.h"
-
- int (*_machine_kexec_prepare)(struct kimage *) = NULL;
- void (*_machine_kexec_shutdown)(void) = NULL;
- void (*_machine_crash_shutdown)(struct pt_regs *regs) = NULL;
-+
- #ifdef CONFIG_SMP
- void (*relocated_kexec_smp_wait) (void *);
- atomic_t kexec_ready_to_reboot = ATOMIC_INIT(0);
- #endif
-
--int
--machine_kexec_prepare(struct kimage *kimage)
-+static void machine_kexec_print_args(void)
- {
-+ unsigned long argc = (int)kexec_args[0];
-+ int i;
-+
-+ pr_info("kexec_args[0] (argc): %lu\n", argc);
-+ pr_info("kexec_args[1] (argv): %p\n", (void *)kexec_args[1]);
-+ pr_info("kexec_args[2] (env ): %p\n", (void *)kexec_args[2]);
-+ pr_info("kexec_args[3] (desc): %p\n", (void *)kexec_args[3]);
-+
-+ for (i = 0; i < argc; i++) {
-+ pr_info("kexec_argv[%d] = %p, %s\n",
-+ i, kexec_argv[i], kexec_argv[i]);
-+ }
-+}
-+
-+static void machine_kexec_init_argv(struct kimage *image)
-+{
-+ void __user *buf = NULL;
-+ size_t bufsz;
-+ size_t size;
-+ int i;
-+
-+ bufsz = 0;
-+ for (i = 0; i < image->nr_segments; i++) {
-+ struct kexec_segment *seg;
-+
-+ seg = &image->segment[i];
-+ if (seg->bufsz < 6)
-+ continue;
-+
-+ if (strncmp((char *) seg->buf, "kexec ", 6))
-+ continue;
-+
-+ buf = seg->buf;
-+ bufsz = seg->bufsz;
-+ break;
-+ }
-+
-+ if (!buf)
-+ return;
-+
-+ size = KEXEC_COMMAND_LINE_SIZE;
-+ size = min(size, bufsz);
-+ if (size < bufsz)
-+ pr_warn("kexec command line truncated to %zd bytes\n", size);
-+
-+ /* Copy to kernel space */
-+ copy_from_user(kexec_argv_buf, buf, size);
-+ kexec_argv_buf[size - 1] = 0;
-+}
-+
-+static void machine_kexec_parse_argv(struct kimage *image)
-+{
-+ char *reboot_code_buffer;
-+ int reloc_delta;
-+ char *ptr;
-+ int argc;
-+ int i;
-+
-+ ptr = kexec_argv_buf;
-+ argc = 0;
-+
-+ /*
-+ * convert command line string to array of parameters
-+ * (as bootloader does).
-+ */
-+ while (ptr && *ptr && (KEXEC_MAX_ARGC > argc)) {
-+ if (*ptr == ' ') {
-+ *ptr++ = '\0';
-+ continue;
-+ }
-+
-+ kexec_argv[argc++] = ptr;
-+ ptr = strchr(ptr, ' ');
-+ }
-+
-+ if (!argc)
-+ return;
-+
-+ kexec_args[0] = argc;
-+ kexec_args[1] = (unsigned long)kexec_argv;
-+ kexec_args[2] = 0;
-+ kexec_args[3] = 0;
-+
-+ reboot_code_buffer = page_address(image->control_code_page);
-+ reloc_delta = reboot_code_buffer - (char *)kexec_relocate_new_kernel;
-+
-+ kexec_args[1] += reloc_delta;
-+ for (i = 0; i < argc; i++)
-+ kexec_argv[i] += reloc_delta;
-+}
-+
-+int machine_kexec_prepare(struct kimage *kimage)
-+{
-+ /*
-+ * Whenever arguments passed from kexec-tools, Init the arguments as
-+ * the original ones to try avoiding booting failure.
-+ */
-+
-+ kexec_args[0] = fw_arg0;
-+ kexec_args[1] = fw_arg1;
-+ kexec_args[2] = fw_arg2;
-+ kexec_args[3] = fw_arg3;
-+
-+ machine_kexec_init_argv(kimage);
-+ machine_kexec_parse_argv(kimage);
-+
- if (_machine_kexec_prepare)
- return _machine_kexec_prepare(kimage);
- return 0;
- }
-
--void
--machine_kexec_cleanup(struct kimage *kimage)
-+void machine_kexec_cleanup(struct kimage *kimage)
- {
- }
-
--void
--machine_shutdown(void)
-+void machine_shutdown(void)
- {
- if (_machine_kexec_shutdown)
- _machine_kexec_shutdown();
- }
-
--void
--machine_crash_shutdown(struct pt_regs *regs)
-+void machine_crash_shutdown(struct pt_regs *regs)
- {
- if (_machine_crash_shutdown)
- _machine_crash_shutdown(regs);
-@@ -66,10 +166,12 @@ machine_kexec(struct kimage *image)
- unsigned long *ptr;
-
- reboot_code_buffer =
-- (unsigned long)page_address(image->control_code_page);
-+ (unsigned long)page_address(image->control_code_page);
-+ pr_info("reboot_code_buffer = %p\n", (void *)reboot_code_buffer);
-
- kexec_start_address =
- (unsigned long) phys_to_virt(image->start);
-+ pr_info("kexec_start_address = %p\n", (void *)kexec_start_address);
-
- if (image->type == KEXEC_TYPE_DEFAULT) {
- kexec_indirection_page =
-@@ -77,9 +179,19 @@ machine_kexec(struct kimage *image)
- } else {
- kexec_indirection_page = (unsigned long)&image->head;
- }
-+ pr_info("kexec_indirection_page = %p\n", (void *)kexec_indirection_page);
-
-- memcpy((void*)reboot_code_buffer, relocate_new_kernel,
-- relocate_new_kernel_size);
-+ pr_info("Where is memcpy: %p\n", memcpy);
-+ pr_info("kexec_relocate_new_kernel = %p, kexec_relocate_new_kernel_end = %p\n",
-+ (void *)kexec_relocate_new_kernel, &kexec_relocate_new_kernel_end);
-+ pr_info("Copy %lu bytes from %p to %p\n", KEXEC_RELOCATE_NEW_KERNEL_SIZE,
-+ (void *)kexec_relocate_new_kernel, (void *)reboot_code_buffer);
-+ memcpy((void*)reboot_code_buffer, kexec_relocate_new_kernel,
-+ KEXEC_RELOCATE_NEW_KERNEL_SIZE);
-+
-+ pr_info("Before _print_args().\n");
-+ machine_kexec_print_args();
-+ pr_info("Before eval loop.\n");
-
- /*
- * The generic kexec code builds a page list with physical
-@@ -98,15 +210,16 @@ machine_kexec(struct kimage *image)
- /*
- * we do not want to be bothered.
- */
-+ pr_info("Before irq_disable.\n");
- local_irq_disable();
-
-- printk("Will call new kernel at %08lx\n", image->start);
-- printk("Bye ...\n");
-+ pr_info("Will call new kernel at %08lx\n", image->start);
-+ pr_info("Bye ...\n");
- __flush_cache_all();
- #ifdef CONFIG_SMP
- /* All secondary cpus now may jump to kexec_wait cycle */
- relocated_kexec_smp_wait = reboot_code_buffer +
-- (void *)(kexec_smp_wait - relocate_new_kernel);
-+ (void *)(kexec_smp_wait - kexec_relocate_new_kernel);
- smp_wmb();
- atomic_set(&kexec_ready_to_reboot, 1);
- #endif
---- /dev/null
-+++ b/arch/mips/kernel/machine_kexec.h
-@@ -0,0 +1,20 @@
-+#ifndef _MACHINE_KEXEC_H
-+#define _MACHINE_KEXEC_H
-+
-+#ifndef __ASSEMBLY__
-+extern const unsigned char kexec_relocate_new_kernel[];
-+extern unsigned long kexec_relocate_new_kernel_end;
-+extern unsigned long kexec_start_address;
-+extern unsigned long kexec_indirection_page;
-+
-+extern char kexec_argv_buf[];
-+extern char *kexec_argv[];
-+
-+#define KEXEC_RELOCATE_NEW_KERNEL_SIZE ((unsigned long)&kexec_relocate_new_kernel_end - (unsigned long)kexec_relocate_new_kernel)
-+#endif /* !__ASSEMBLY__ */
-+
-+#define KEXEC_COMMAND_LINE_SIZE 256
-+#define KEXEC_ARGV_SIZE (KEXEC_COMMAND_LINE_SIZE / 16)
-+#define KEXEC_MAX_ARGC (KEXEC_ARGV_SIZE / sizeof(long))
-+
-+#endif
---- a/arch/mips/kernel/relocate_kernel.S
-+++ b/arch/mips/kernel/relocate_kernel.S
-@@ -12,8 +12,9 @@
- #include <asm/mipsregs.h>
- #include <asm/stackframe.h>
- #include <asm/addrspace.h>
-+#include "machine_kexec.h"
-
--LEAF(relocate_new_kernel)
-+LEAF(kexec_relocate_new_kernel)
- PTR_L a0, arg0
- PTR_L a1, arg1
- PTR_L a2, arg2
-@@ -98,7 +99,7 @@ done:
- #endif
- /* jump to kexec_start_address */
- j s1
-- END(relocate_new_kernel)
-+ END(kexec_relocate_new_kernel)
-
- #ifdef CONFIG_SMP
- /*
-@@ -184,9 +185,15 @@ kexec_indirection_page:
- PTR 0
- .size kexec_indirection_page, PTRSIZE
-
--relocate_new_kernel_end:
-+kexec_argv_buf:
-+ EXPORT(kexec_argv_buf)
-+ .skip KEXEC_COMMAND_LINE_SIZE
-+ .size kexec_argv_buf, KEXEC_COMMAND_LINE_SIZE
-+
-+kexec_argv:
-+ EXPORT(kexec_argv)
-+ .skip KEXEC_ARGV_SIZE
-+ .size kexec_argv, KEXEC_ARGV_SIZE
-
--relocate_new_kernel_size:
-- EXPORT(relocate_new_kernel_size)
-- PTR relocate_new_kernel_end - relocate_new_kernel
-- .size relocate_new_kernel_size, PTRSIZE
-+kexec_relocate_new_kernel_end:
-+ EXPORT(kexec_relocate_new_kernel_end)
+++ /dev/null
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -12,6 +12,23 @@ menuconfig MTD
-
- if MTD
-
-+menu "OpenWrt specific MTD options"
-+
-+config MTD_ROOTFS_ROOT_DEV
-+ bool "Automatically set 'rootfs' partition to be root filesystem"
-+ default y
-+
-+config MTD_SPLIT_FIRMWARE
-+ bool "Automatically split firmware partition for kernel+rootfs"
-+ default y
-+
-+config MTD_SPLIT_FIRMWARE_NAME
-+ string "Firmware partition name"
-+ depends on MTD_SPLIT_FIRMWARE
-+ default "firmware"
-+
-+endmenu
-+
- config MTD_TESTS
- tristate "MTD tests support (DANGEROUS)"
- depends on m
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -30,9 +30,11 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
- #include <linux/of.h>
-+#include <linux/magic.h>
- #include <linux/err.h>
-
- #include "mtdcore.h"
-+#include "mtdsplit/mtdsplit.h"
-
- /* Our partition linked list */
- static LIST_HEAD(mtd_partitions);
-@@ -46,13 +48,14 @@ struct mtd_part {
- struct list_head list;
- };
-
-+static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part);
-+
- /*
- * Given a pointer to the MTD object in the mtd_part structure, we can retrieve
- * the pointer to that structure with this macro.
- */
- #define PART(x) ((struct mtd_part *)(x))
-
--
- /*
- * MTD methods which simply translate the effective address and pass through
- * to the _real_ device.
-@@ -548,8 +551,10 @@ out_register:
- return slave;
- }
-
--int mtd_add_partition(struct mtd_info *master, const char *name,
-- long long offset, long long length)
-+
-+static int
-+__mtd_add_partition(struct mtd_info *master, const char *name,
-+ long long offset, long long length, bool dup_check)
- {
- struct mtd_partition part;
- struct mtd_part *p, *new;
-@@ -581,21 +586,24 @@ int mtd_add_partition(struct mtd_info *m
- end = offset + length;
-
- mutex_lock(&mtd_partitions_mutex);
-- list_for_each_entry(p, &mtd_partitions, list)
-- if (p->master == master) {
-- if ((start >= p->offset) &&
-- (start < (p->offset + p->mtd.size)))
-- goto err_inv;
--
-- if ((end >= p->offset) &&
-- (end < (p->offset + p->mtd.size)))
-- goto err_inv;
-- }
-+ if (dup_check) {
-+ list_for_each_entry(p, &mtd_partitions, list)
-+ if (p->master == master) {
-+ if ((start >= p->offset) &&
-+ (start < (p->offset + p->mtd.size)))
-+ goto err_inv;
-+
-+ if ((end >= p->offset) &&
-+ (end < (p->offset + p->mtd.size)))
-+ goto err_inv;
-+ }
-+ }
-
- list_add(&new->list, &mtd_partitions);
- mutex_unlock(&mtd_partitions_mutex);
-
- add_mtd_device(&new->mtd);
-+ mtd_partition_split(master, new);
-
- return ret;
- err_inv:
-@@ -605,6 +613,12 @@ err_inv:
- }
- EXPORT_SYMBOL_GPL(mtd_add_partition);
-
-+int mtd_add_partition(struct mtd_info *master, const char *name,
-+ long long offset, long long length)
-+{
-+ return __mtd_add_partition(master, name, offset, length, true);
-+}
-+
- int mtd_del_partition(struct mtd_info *master, int partno)
- {
- struct mtd_part *slave, *next;
-@@ -628,6 +642,35 @@ int mtd_del_partition(struct mtd_info *m
- }
- EXPORT_SYMBOL_GPL(mtd_del_partition);
-
-+#ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
-+#define SPLIT_FIRMWARE_NAME CONFIG_MTD_SPLIT_FIRMWARE_NAME
-+#else
-+#define SPLIT_FIRMWARE_NAME "unused"
-+#endif
-+
-+static void split_firmware(struct mtd_info *master, struct mtd_part *part)
-+{
-+}
-+
-+void __weak arch_split_mtd_part(struct mtd_info *master, const char *name,
-+ int offset, int size)
-+{
-+}
-+
-+static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part)
-+{
-+ static int rootfs_found = 0;
-+
-+ if (rootfs_found)
-+ return;
-+
-+ if (!strcmp(part->mtd.name, SPLIT_FIRMWARE_NAME) &&
-+ config_enabled(CONFIG_MTD_SPLIT_FIRMWARE))
-+ split_firmware(master, part);
-+
-+ arch_split_mtd_part(master, part->mtd.name, part->offset,
-+ part->mtd.size);
-+}
- /*
- * This function, given a master MTD object and a partition table, creates
- * and registers slave MTD objects which are bound to the master according to
-@@ -657,6 +700,7 @@ int add_mtd_partitions(struct mtd_info *
- mutex_unlock(&mtd_partitions_mutex);
-
- add_mtd_device(&slave->mtd);
-+ mtd_partition_split(master, slave);
-
- cur_offset = slave->offset + slave->mtd.size;
- }
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -84,5 +84,7 @@ int mtd_add_partition(struct mtd_info *m
- long long offset, long long length);
- int mtd_del_partition(struct mtd_info *master, int partno);
- uint64_t mtd_get_device_size(const struct mtd_info *mtd);
-+extern void __weak arch_split_mtd_part(struct mtd_info *master,
-+ const char *name, int offset, int size);
-
- #endif
+++ /dev/null
-From 02cff0ccaa6d364f5c1eeea83f47ac80ccc967d4 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Tue, 3 Sep 2013 18:11:50 +0200
-Subject: [PATCH] mtd: add support for different partition parser types
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/mtdpart.c | 56 ++++++++++++++++++++++++++++++++++++++++
- include/linux/mtd/partitions.h | 11 ++++++++
- 2 files changed, 67 insertions(+)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -730,6 +730,30 @@ static struct mtd_part_parser *get_parti
-
- #define put_partition_parser(p) do { module_put((p)->owner); } while (0)
-
-+static struct mtd_part_parser *
-+get_partition_parser_by_type(enum mtd_parser_type type,
-+ struct mtd_part_parser *start)
-+{
-+ struct mtd_part_parser *p, *ret = NULL;
-+
-+ spin_lock(&part_parser_lock);
-+
-+ p = list_prepare_entry(start, &part_parsers, list);
-+ if (start)
-+ put_partition_parser(start);
-+
-+ list_for_each_entry_continue(p, &part_parsers, list) {
-+ if (p->type == type && try_module_get(p->owner)) {
-+ ret = p;
-+ break;
-+ }
-+ }
-+
-+ spin_unlock(&part_parser_lock);
-+
-+ return ret;
-+}
-+
- void register_mtd_parser(struct mtd_part_parser *p)
- {
- spin_lock(&part_parser_lock);
-@@ -845,6 +869,38 @@ int parse_mtd_partitions(struct mtd_info
- return ret;
- }
-
-+int parse_mtd_partitions_by_type(struct mtd_info *master,
-+ enum mtd_parser_type type,
-+ struct mtd_partition **pparts,
-+ struct mtd_part_parser_data *data)
-+{
-+ struct mtd_part_parser *prev = NULL;
-+ int ret = 0;
-+
-+ while (1) {
-+ struct mtd_part_parser *parser;
-+
-+ parser = get_partition_parser_by_type(type, prev);
-+ if (!parser)
-+ break;
-+
-+ ret = (*parser->parse_fn)(master, pparts, data);
-+
-+ if (ret > 0) {
-+ put_partition_parser(parser);
-+ printk(KERN_NOTICE
-+ "%d %s partitions found on MTD device %s\n",
-+ ret, parser->name, master->name);
-+ break;
-+ }
-+
-+ prev = parser;
-+ }
-+
-+ return ret;
-+}
-+EXPORT_SYMBOL_GPL(parse_mtd_partitions_by_type);
-+
- int mtd_is_partition(const struct mtd_info *mtd)
- {
- struct mtd_part *part;
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -68,12 +68,17 @@ struct mtd_part_parser_data {
- * Functions dealing with the various ways of partitioning the space
- */
-
-+enum mtd_parser_type {
-+ MTD_PARSER_TYPE_DEVICE = 0,
-+};
-+
- struct mtd_part_parser {
- struct list_head list;
- struct module *owner;
- const char *name;
- int (*parse_fn)(struct mtd_info *, struct mtd_partition **,
- struct mtd_part_parser_data *);
-+ enum mtd_parser_type type;
- };
-
- extern void register_mtd_parser(struct mtd_part_parser *parser);
-@@ -87,4 +92,9 @@ uint64_t mtd_get_device_size(const struc
- extern void __weak arch_split_mtd_part(struct mtd_info *master,
- const char *name, int offset, int size);
-
-+int parse_mtd_partitions_by_type(struct mtd_info *master,
-+ enum mtd_parser_type type,
-+ struct mtd_partition **pparts,
-+ struct mtd_part_parser_data *data);
-+
- #endif
+++ /dev/null
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -642,6 +642,37 @@ int mtd_del_partition(struct mtd_info *m
- }
- EXPORT_SYMBOL_GPL(mtd_del_partition);
-
-+static int
-+run_parsers_by_type(struct mtd_part *slave, enum mtd_parser_type type)
-+{
-+ struct mtd_partition *parts;
-+ int nr_parts;
-+ int i;
-+
-+ nr_parts = parse_mtd_partitions_by_type(&slave->mtd, type, &parts,
-+ NULL);
-+ if (nr_parts <= 0)
-+ return nr_parts;
-+
-+ if (WARN_ON(!parts))
-+ return 0;
-+
-+ for (i = 0; i < nr_parts; i++) {
-+ /* adjust partition offsets */
-+ parts[i].offset += slave->offset;
-+
-+ __mtd_add_partition(slave->master,
-+ parts[i].name,
-+ parts[i].offset,
-+ parts[i].size,
-+ false);
-+ }
-+
-+ kfree(parts);
-+
-+ return nr_parts;
-+}
-+
- #ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
- #define SPLIT_FIRMWARE_NAME CONFIG_MTD_SPLIT_FIRMWARE_NAME
- #else
-@@ -650,6 +681,7 @@ EXPORT_SYMBOL_GPL(mtd_del_partition);
-
- static void split_firmware(struct mtd_info *master, struct mtd_part *part)
- {
-+ run_parsers_by_type(part, MTD_PARSER_TYPE_FIRMWARE);
- }
-
- void __weak arch_split_mtd_part(struct mtd_info *master, const char *name,
-@@ -664,6 +696,12 @@ static void mtd_partition_split(struct m
- if (rootfs_found)
- return;
-
-+ if (!strcmp(part->mtd.name, "rootfs")) {
-+ run_parsers_by_type(part, MTD_PARSER_TYPE_ROOTFS);
-+
-+ rootfs_found = 1;
-+ }
-+
- if (!strcmp(part->mtd.name, SPLIT_FIRMWARE_NAME) &&
- config_enabled(CONFIG_MTD_SPLIT_FIRMWARE))
- split_firmware(master, part);
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -70,6 +70,8 @@ struct mtd_part_parser_data {
-
- enum mtd_parser_type {
- MTD_PARSER_TYPE_DEVICE = 0,
-+ MTD_PARSER_TYPE_ROOTFS,
-+ MTD_PARSER_TYPE_FIRMWARE,
- };
-
- struct mtd_part_parser {
+++ /dev/null
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -27,6 +27,8 @@ config MTD_SPLIT_FIRMWARE_NAME
- depends on MTD_SPLIT_FIRMWARE
- default "firmware"
-
-+source "drivers/mtd/mtdsplit/Kconfig"
-+
- endmenu
-
- config MTD_TESTS
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -6,6 +6,8 @@
- obj-$(CONFIG_MTD) += mtd.o
- mtd-y := mtdcore.o mtdsuper.o mtdconcat.o mtdpart.o mtdchar.o
-
-+obj-$(CONFIG_MTD_SPLIT) += mtdsplit/
-+
- obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
+++ /dev/null
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -446,14 +446,12 @@ static struct mtd_part *allocate_partiti
- if (slave->offset == MTDPART_OFS_APPEND)
- slave->offset = cur_offset;
- if (slave->offset == MTDPART_OFS_NXTBLK) {
-- slave->offset = cur_offset;
-- if (mtd_mod_by_eb(cur_offset, master) != 0) {
-- /* Round up to next erasesize */
-- slave->offset = (mtd_div_by_eb(cur_offset, master) + 1) * master->erasesize;
-+ /* Round up to next erasesize */
-+ slave->offset = mtd_roundup_to_eb(cur_offset, master);
-+ if (slave->offset != cur_offset)
- printk(KERN_NOTICE "Moving partition %d: "
- "0x%012llx -> 0x%012llx\n", partno,
- (unsigned long long)cur_offset, (unsigned long long)slave->offset);
-- }
- }
- if (slave->offset == MTDPART_OFS_RETAIN) {
- slave->offset = cur_offset;
-@@ -673,6 +671,17 @@ run_parsers_by_type(struct mtd_part *sla
- return nr_parts;
- }
-
-+static inline unsigned long
-+mtd_pad_erasesize(struct mtd_info *mtd, int offset, int len)
-+{
-+ unsigned long mask = mtd->erasesize - 1;
-+
-+ len += offset & mask;
-+ len = (len + mask) & ~mask;
-+ len -= offset & mask;
-+ return len;
-+}
-+
- #ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
- #define SPLIT_FIRMWARE_NAME CONFIG_MTD_SPLIT_FIRMWARE_NAME
- #else
-@@ -956,6 +965,24 @@ int mtd_is_partition(const struct mtd_in
- }
- EXPORT_SYMBOL_GPL(mtd_is_partition);
-
-+struct mtd_info *mtdpart_get_master(const struct mtd_info *mtd)
-+{
-+ if (!mtd_is_partition(mtd))
-+ return (struct mtd_info *)mtd;
-+
-+ return PART(mtd)->master;
-+}
-+EXPORT_SYMBOL_GPL(mtdpart_get_master);
-+
-+uint64_t mtdpart_get_offset(const struct mtd_info *mtd)
-+{
-+ if (!mtd_is_partition(mtd))
-+ return 0;
-+
-+ return PART(mtd)->offset;
-+}
-+EXPORT_SYMBOL_GPL(mtdpart_get_offset);
-+
- /* Returns the size of the entire flash chip */
- uint64_t mtd_get_device_size(const struct mtd_info *mtd)
- {
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -90,6 +90,8 @@ int mtd_is_partition(const struct mtd_in
- int mtd_add_partition(struct mtd_info *master, const char *name,
- long long offset, long long length);
- int mtd_del_partition(struct mtd_info *master, int partno);
-+struct mtd_info *mtdpart_get_master(const struct mtd_info *mtd);
-+uint64_t mtdpart_get_offset(const struct mtd_info *mtd);
- uint64_t mtd_get_device_size(const struct mtd_info *mtd);
- extern void __weak arch_split_mtd_part(struct mtd_info *master,
- const char *name, int offset, int size);
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -333,6 +333,24 @@ static inline uint32_t mtd_mod_by_eb(uin
- return do_div(sz, mtd->erasesize);
- }
-
-+static inline uint64_t mtd_roundup_to_eb(uint64_t sz, struct mtd_info *mtd)
-+{
-+ if (mtd_mod_by_eb(sz, mtd) == 0)
-+ return sz;
-+
-+ /* Round up to next erase block */
-+ return (mtd_div_by_eb(sz, mtd) + 1) * mtd->erasesize;
-+}
-+
-+static inline uint64_t mtd_rounddown_to_eb(uint64_t sz, struct mtd_info *mtd)
-+{
-+ if (mtd_mod_by_eb(sz, mtd) == 0)
-+ return sz;
-+
-+ /* Round down to the start of the current erase block */
-+ return (mtd_div_by_eb(sz, mtd)) * mtd->erasesize;
-+}
-+
- static inline uint32_t mtd_div_by_ws(uint64_t sz, struct mtd_info *mtd)
- {
- if (mtd->writesize_shift)
+++ /dev/null
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -27,6 +27,11 @@ config MTD_SPLIT_FIRMWARE_NAME
- depends on MTD_SPLIT_FIRMWARE
- default "firmware"
-
-+config MTD_UIMAGE_SPLIT
-+ bool "Enable split support for firmware partitions containing a uImage"
-+ depends on MTD_SPLIT_FIRMWARE
-+ default y
-+
- source "drivers/mtd/mtdsplit/Kconfig"
-
- endmenu
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -682,6 +682,37 @@ mtd_pad_erasesize(struct mtd_info *mtd,
- return len;
- }
-
-+#define UBOOT_MAGIC 0x27051956
-+
-+static void split_uimage(struct mtd_info *master, struct mtd_part *part)
-+{
-+ struct {
-+ __be32 magic;
-+ __be32 pad[2];
-+ __be32 size;
-+ } hdr;
-+ size_t len;
-+
-+ if (mtd_read(master, part->offset, sizeof(hdr), &len, (void *) &hdr))
-+ return;
-+
-+ if (len != sizeof(hdr) || hdr.magic != cpu_to_be32(UBOOT_MAGIC))
-+ return;
-+
-+ len = be32_to_cpu(hdr.size) + 0x40;
-+ len = mtd_pad_erasesize(master, part->offset, len);
-+ if (len + master->erasesize > part->mtd.size)
-+ return;
-+
-+ if (config_enabled(CONFIG_MTD_SPLIT_UIMAGE_FW))
-+ pr_err("Dedicated partitioner didn't split firmware partition, please fill a bug report!\n");
-+ else
-+ pr_warn("Support for built-in firmware splitter will be removed, please use CONFIG_MTD_SPLIT_UIMAGE_FW\n");
-+
-+ __mtd_add_partition(master, "rootfs", part->offset + len,
-+ part->mtd.size - len, false);
-+}
-+
- #ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
- #define SPLIT_FIRMWARE_NAME CONFIG_MTD_SPLIT_FIRMWARE_NAME
- #else
-@@ -690,7 +721,14 @@ mtd_pad_erasesize(struct mtd_info *mtd,
-
- static void split_firmware(struct mtd_info *master, struct mtd_part *part)
- {
-- run_parsers_by_type(part, MTD_PARSER_TYPE_FIRMWARE);
-+ int ret;
-+
-+ ret = run_parsers_by_type(part, MTD_PARSER_TYPE_FIRMWARE);
-+ if (ret > 0)
-+ return;
-+
-+ if (config_enabled(CONFIG_MTD_UIMAGE_SPLIT))
-+ split_uimage(master, part);
- }
-
- void __weak arch_split_mtd_part(struct mtd_info *master, const char *name,
+++ /dev/null
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -18,6 +18,11 @@ config MTD_ROOTFS_ROOT_DEV
- bool "Automatically set 'rootfs' partition to be root filesystem"
- default y
-
-+config MTD_ROOTFS_SPLIT
-+ bool "Automatically split 'rootfs' partition for squashfs"
-+ select MTD_SPLIT
-+ default y
-+
- config MTD_SPLIT_FIRMWARE
- bool "Automatically split firmware partition for kernel+rootfs"
- default y
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -682,6 +682,47 @@ mtd_pad_erasesize(struct mtd_info *mtd,
- return len;
- }
-
-+static int split_squashfs(struct mtd_info *master, int offset, int *split_offset)
-+{
-+ size_t squashfs_len;
-+ int len, ret;
-+
-+ ret = mtd_get_squashfs_len(master, offset, &squashfs_len);
-+ if (ret)
-+ return ret;
-+
-+ len = mtd_pad_erasesize(master, offset, squashfs_len);
-+ *split_offset = offset + len;
-+
-+ return 0;
-+}
-+
-+static void split_rootfs_data(struct mtd_info *master, struct mtd_part *part)
-+{
-+ unsigned int split_offset = 0;
-+ unsigned int split_size;
-+ int ret;
-+
-+ ret = split_squashfs(master, part->offset, &split_offset);
-+ if (ret)
-+ return;
-+
-+ if (split_offset <= 0)
-+ return;
-+
-+ if (config_enabled(CONFIG_MTD_SPLIT_SQUASHFS_ROOT))
-+ pr_err("Dedicated partitioner didn't create \"rootfs_data\" partition, please fill a bug report!\n");
-+ else
-+ pr_warn("Support for built-in \"rootfs_data\" splitter will be removed, please use CONFIG_MTD_SPLIT_SQUASHFS_ROOT\n");
-+
-+ split_size = part->mtd.size - (split_offset - part->offset);
-+ printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=0x%x, len=0x%x\n",
-+ ROOTFS_SPLIT_NAME, split_offset, split_size);
-+
-+ __mtd_add_partition(master, ROOTFS_SPLIT_NAME, split_offset,
-+ split_size, false);
-+}
-+
- #define UBOOT_MAGIC 0x27051956
-
- static void split_uimage(struct mtd_info *master, struct mtd_part *part)
-@@ -744,7 +785,10 @@ static void mtd_partition_split(struct m
- return;
-
- if (!strcmp(part->mtd.name, "rootfs")) {
-- run_parsers_by_type(part, MTD_PARSER_TYPE_ROOTFS);
-+ int num = run_parsers_by_type(part, MTD_PARSER_TYPE_ROOTFS);
-+
-+ if (num <= 0 && config_enabled(CONFIG_MTD_ROOTFS_SPLIT))
-+ split_rootfs_data(master, part);
-
- rootfs_found = 1;
- }
+++ /dev/null
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -35,6 +35,7 @@
- * Note: writeable partitions require their size and offset be
- * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
- */
-+struct mtd_info;
-
- struct mtd_partition {
- const char *name; /* identifier string */
-@@ -50,7 +51,6 @@ struct mtd_partition {
- #define MTDPART_SIZ_FULL (0)
-
-
--struct mtd_info;
- struct device_node;
-
- /**
+++ /dev/null
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -36,6 +36,8 @@
- #include "mtdcore.h"
- #include "mtdsplit/mtdsplit.h"
-
-+#define MTD_ERASE_PARTIAL 0x8000 /* partition only covers parts of an erase block */
-+
- /* Our partition linked list */
- static LIST_HEAD(mtd_partitions);
- static DEFINE_MUTEX(mtd_partitions_mutex);
-@@ -234,13 +236,61 @@ static int part_erase(struct mtd_info *m
- struct mtd_part *part = PART(mtd);
- int ret;
-
-+
-+ instr->partial_start = false;
-+ if (mtd->flags & MTD_ERASE_PARTIAL) {
-+ size_t readlen = 0;
-+ u64 mtd_ofs;
-+
-+ instr->erase_buf = kmalloc(part->master->erasesize, GFP_ATOMIC);
-+ if (!instr->erase_buf)
-+ return -ENOMEM;
-+
-+ mtd_ofs = part->offset + instr->addr;
-+ instr->erase_buf_ofs = do_div(mtd_ofs, part->master->erasesize);
-+
-+ if (instr->erase_buf_ofs > 0) {
-+ instr->addr -= instr->erase_buf_ofs;
-+ ret = mtd_read(part->master,
-+ instr->addr + part->offset,
-+ part->master->erasesize,
-+ &readlen, instr->erase_buf);
-+
-+ instr->len += instr->erase_buf_ofs;
-+ instr->partial_start = true;
-+ } else {
-+ mtd_ofs = part->offset + part->mtd.size;
-+ instr->erase_buf_ofs = part->master->erasesize -
-+ do_div(mtd_ofs, part->master->erasesize);
-+
-+ if (instr->erase_buf_ofs > 0) {
-+ instr->len += instr->erase_buf_ofs;
-+ ret = mtd_read(part->master,
-+ part->offset + instr->addr +
-+ instr->len - part->master->erasesize,
-+ part->master->erasesize, &readlen,
-+ instr->erase_buf);
-+ } else {
-+ ret = 0;
-+ }
-+ }
-+ if (ret < 0) {
-+ kfree(instr->erase_buf);
-+ return ret;
-+ }
-+
-+ }
-+
- instr->addr += part->offset;
- ret = part->master->_erase(part->master, instr);
- if (ret) {
- if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
- instr->fail_addr -= part->offset;
- instr->addr -= part->offset;
-+ if (mtd->flags & MTD_ERASE_PARTIAL)
-+ kfree(instr->erase_buf);
- }
-+
- return ret;
- }
-
-@@ -248,7 +298,25 @@ void mtd_erase_callback(struct erase_inf
- {
- if (instr->mtd->_erase == part_erase) {
- struct mtd_part *part = PART(instr->mtd);
-+ size_t wrlen = 0;
-
-+ if (instr->mtd->flags & MTD_ERASE_PARTIAL) {
-+ if (instr->partial_start) {
-+ part->master->_write(part->master,
-+ instr->addr, instr->erase_buf_ofs,
-+ &wrlen, instr->erase_buf);
-+ instr->addr += instr->erase_buf_ofs;
-+ } else {
-+ instr->len -= instr->erase_buf_ofs;
-+ part->master->_write(part->master,
-+ instr->addr + instr->len,
-+ instr->erase_buf_ofs, &wrlen,
-+ instr->erase_buf +
-+ part->master->erasesize -
-+ instr->erase_buf_ofs);
-+ }
-+ kfree(instr->erase_buf);
-+ }
- if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
- instr->fail_addr -= part->offset;
- instr->addr -= part->offset;
-@@ -515,17 +583,20 @@ static struct mtd_part *allocate_partiti
- if ((slave->mtd.flags & MTD_WRITEABLE) &&
- mtd_mod_by_eb(slave->offset, &slave->mtd)) {
- /* Doesn't start on a boundary of major erase size */
-- /* FIXME: Let it be writable if it is on a boundary of
-- * _minor_ erase size though */
-- slave->mtd.flags &= ~MTD_WRITEABLE;
-- printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
-- part->name);
-+ slave->mtd.flags |= MTD_ERASE_PARTIAL;
-+ if (((u32) slave->mtd.size) > master->erasesize)
-+ slave->mtd.flags &= ~MTD_WRITEABLE;
-+ else
-+ slave->mtd.erasesize = slave->mtd.size;
- }
- if ((slave->mtd.flags & MTD_WRITEABLE) &&
-- mtd_mod_by_eb(slave->mtd.size, &slave->mtd)) {
-- slave->mtd.flags &= ~MTD_WRITEABLE;
-- printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
-- part->name);
-+ mtd_mod_by_eb(slave->offset + slave->mtd.size, &slave->mtd)) {
-+ slave->mtd.flags |= MTD_ERASE_PARTIAL;
-+
-+ if ((u32) slave->mtd.size > master->erasesize)
-+ slave->mtd.flags &= ~MTD_WRITEABLE;
-+ else
-+ slave->mtd.erasesize = slave->mtd.size;
- }
-
- slave->mtd.ecclayout = master->ecclayout;
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -55,6 +55,10 @@ struct erase_info {
- u_long priv;
- u_char state;
- struct erase_info *next;
-+
-+ u8 *erase_buf;
-+ u32 erase_buf_ofs;
-+ bool partial_start;
- };
-
- struct mtd_erase_region_info {
+++ /dev/null
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -335,7 +335,14 @@ static int part_lock(struct mtd_info *mt
- static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
- {
- struct mtd_part *part = PART(mtd);
-- return part->master->_unlock(part->master, ofs + part->offset, len);
-+
-+ ofs += part->offset;
-+ if (mtd->flags & MTD_ERASE_PARTIAL) {
-+ /* round up len to next erasesize and round down offset to prev block */
-+ len = (mtd_div_by_eb(len, part->master) + 1) * part->master->erasesize;
-+ ofs &= ~(part->master->erasesize - 1);
-+ }
-+ return part->master->_unlock(part->master, ofs, len);
- }
-
- static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+++ /dev/null
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -265,14 +265,21 @@ static int parse_redboot_partitions(stru
- #endif
- names += strlen(names)+1;
-
--#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
-- i++;
-- parts[i].offset = parts[i-1].size + parts[i-1].offset;
-- parts[i].size = fl->next->img->flash_base - parts[i].offset;
-- parts[i].name = nullname;
-- }
-+ if (!strcmp(parts[i].name, "rootfs")) {
-+ parts[i].size = fl->next->img->flash_base;
-+ parts[i].size &= ~(master->erasesize - 1);
-+ parts[i].size -= parts[i].offset;
-+#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
-+ nrparts--;
-+ } else {
-+ i++;
-+ parts[i].offset = parts[i-1].size + parts[i-1].offset;
-+ parts[i].size = fl->next->img->flash_base - parts[i].offset;
-+ parts[i].name = nullname;
- #endif
-+ }
-+ }
- tmp_fl = fl;
- fl = fl->next;
- kfree(tmp_fl);
+++ /dev/null
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -184,6 +184,22 @@ config MTD_BCM47XX_PARTS
- This provides partitions parser for devices based on BCM47xx
- boards.
-
-+config MTD_MYLOADER_PARTS
-+ tristate "MyLoader partition parsing"
-+ depends on ADM5120 || ATH25 || ATH79
-+ ---help---
-+ MyLoader is a bootloader which allows the user to define partitions
-+ in flash devices, by putting a table in the second erase block
-+ on the device, similar to a partition table. This table gives the
-+ offsets and lengths of the user defined partitions.
-+
-+ If you need code which can detect and parse these tables, and
-+ register MTD 'partitions' corresponding to each image detected,
-+ enable this option.
-+
-+ You will still need the parsing functions to be called by the driver
-+ for your particular device. It won't happen automatically.
-+
- comment "User Modules And Translation Layers"
-
- #
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -15,6 +15,7 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
- obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
- obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
-+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
-
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sat, 2 Jan 2016 01:04:52 +0100
-Subject: [PATCH] mtd: bcm47xxpart: check for bad blocks when calculating
- offsets
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/mtd/bcm47xxpart.c | 50 +++++++++++++++++++++++++++++++++++++----------
- 1 file changed, 40 insertions(+), 10 deletions(-)
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -61,6 +61,34 @@ static void bcm47xxpart_add_part(struct
- part->mask_flags = mask_flags;
- }
-
-+/*
-+ * Calculate real end offset (address) for a given amount of data. It checks
-+ * all blocks skipping bad ones.
-+ */
-+static size_t bcm47xxpart_real_offset(struct mtd_info *master, size_t offset,
-+ size_t bytes)
-+{
-+ size_t real_offset = offset;
-+
-+ if (mtd_block_isbad(master, real_offset))
-+ pr_warn("Base offset shouldn't be at bad block");
-+
-+ while (bytes >= master->erasesize) {
-+ bytes -= master->erasesize;
-+ real_offset += master->erasesize;
-+ while (mtd_block_isbad(master, real_offset)) {
-+ real_offset += master->erasesize;
-+
-+ if (real_offset >= master->size)
-+ return real_offset - master->erasesize;
-+ }
-+ }
-+
-+ real_offset += bytes;
-+
-+ return real_offset;
-+}
-+
- static const char *bcm47xxpart_trx_data_part_name(struct mtd_info *master,
- size_t offset)
- {
-@@ -182,6 +210,8 @@ static int bcm47xxpart_parse(struct mtd_
-
- /* TRX */
- if (buf[0x000 / 4] == TRX_MAGIC) {
-+ uint32_t tmp;
-+
- if (BCM47XXPART_MAX_PARTS - curr_part < 4) {
- pr_warn("Not enough partitions left to register trx, scanning stopped!\n");
- break;
-@@ -196,18 +226,18 @@ static int bcm47xxpart_parse(struct mtd_
- i = 0;
- /* We have LZMA loader if offset[2] points to sth */
- if (trx->offset[2]) {
-+ tmp = bcm47xxpart_real_offset(master, offset,
-+ trx->offset[i]);
- bcm47xxpart_add_part(&parts[curr_part++],
-- "loader",
-- offset + trx->offset[i],
-- 0);
-+ "loader", tmp, 0);
- i++;
- }
-
- if (trx->offset[i]) {
-+ tmp = bcm47xxpart_real_offset(master, offset,
-+ trx->offset[i]);
- bcm47xxpart_add_part(&parts[curr_part++],
-- "linux",
-- offset + trx->offset[i],
-- 0);
-+ "linux", tmp, 0);
- i++;
- }
-
-@@ -219,11 +249,11 @@ static int bcm47xxpart_parse(struct mtd_
- if (trx->offset[i]) {
- const char *name;
-
-- name = bcm47xxpart_trx_data_part_name(master, offset + trx->offset[i]);
-+ tmp = bcm47xxpart_real_offset(master, offset,
-+ trx->offset[i]);
-+ name = bcm47xxpart_trx_data_part_name(master, tmp);
- bcm47xxpart_add_part(&parts[curr_part++],
-- name,
-- offset + trx->offset[i],
-- 0);
-+ name, tmp, 0);
- i++;
- }
-
+++ /dev/null
-From fd54aa583296f9adfb1f519affbc10ba521eb809 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 28 Jan 2015 22:14:41 +0100
-Subject: [PATCH] mtd: bcm47xxpart: detect T_Meter partition
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It can be found on many Netgear devices. It consists of many 0x30 blocks
-starting with 4D 54.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/mtd/bcm47xxpart.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -38,6 +38,7 @@
- #define NVRAM_HEADER 0x48534C46 /* FLSH */
- #define POT_MAGIC1 0x54544f50 /* POTT */
- #define POT_MAGIC2 0x504f /* OP */
-+#define T_METER_MAGIC 0x4D540000 /* MT */
- #define ML_MAGIC1 0x39685a42
- #define ML_MAGIC2 0x26594131
- #define TRX_MAGIC 0x30524448
-@@ -207,6 +208,15 @@ static int bcm47xxpart_parse(struct mtd_
- MTD_WRITEABLE);
- continue;
- }
-+
-+ /* T_Meter */
-+ if ((le32_to_cpu(buf[0x000 / 4]) & 0xFFFF0000) == T_METER_MAGIC &&
-+ (le32_to_cpu(buf[0x030 / 4]) & 0xFFFF0000) == T_METER_MAGIC &&
-+ (le32_to_cpu(buf[0x060 / 4]) & 0xFFFF0000) == T_METER_MAGIC) {
-+ bcm47xxpart_add_part(&parts[curr_part++], "T_Meter", offset,
-+ MTD_WRITEABLE);
-+ continue;
-+ }
-
- /* TRX */
- if (buf[0x000 / 4] == TRX_MAGIC) {
+++ /dev/null
---- a/drivers/mtd/devices/block2mtd.c
-+++ b/drivers/mtd/devices/block2mtd.c
-@@ -17,6 +17,7 @@
- #include <linux/list.h>
- #include <linux/init.h>
- #include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
- #include <linux/mutex.h>
- #include <linux/mount.h>
- #include <linux/slab.h>
-@@ -209,11 +210,12 @@ static void block2mtd_free_device(struct
- }
-
-
--static struct block2mtd_dev *add_device(char *devname, int erase_size)
-+static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
- {
- const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
- struct block_device *bdev;
- struct block2mtd_dev *dev;
-+ struct mtd_partition *part;
- char *name;
-
- if (!devname)
-@@ -257,13 +259,16 @@ static struct block2mtd_dev *add_device(
-
- /* Setup the MTD structure */
- /* make the name contain the block device in */
-- name = kasprintf(GFP_KERNEL, "block2mtd: %s", devname);
-+ if (!mtdname)
-+ mtdname = devname;
-+ name = kmalloc(strlen(mtdname) + 1, GFP_KERNEL);
- if (!name)
- goto err_destroy_mutex;
-
-+ strcpy(name, mtdname);
- dev->mtd.name = name;
-
-- dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
-+ dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK & ~(erase_size - 1);
- dev->mtd.erasesize = erase_size;
- dev->mtd.writesize = 1;
- dev->mtd.writebufsize = PAGE_SIZE;
-@@ -276,15 +281,18 @@ static struct block2mtd_dev *add_device(
- dev->mtd.priv = dev;
- dev->mtd.owner = THIS_MODULE;
-
-- if (mtd_device_register(&dev->mtd, NULL, 0)) {
-+ part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
-+ part->name = name;
-+ part->offset = 0;
-+ part->size = dev->mtd.size;
-+ if (mtd_device_register(&dev->mtd, part, 1)) {
- /* Device didn't get added, so free the entry */
- goto err_destroy_mutex;
- }
- list_add(&dev->list, &blkmtd_device_list);
- pr_info("mtd%d: [%s] erase_size = %dKiB [%d]\n",
- dev->mtd.index,
-- dev->mtd.name + strlen("block2mtd: "),
-- dev->mtd.erasesize >> 10, dev->mtd.erasesize);
-+ mtdname, dev->mtd.erasesize >> 10, dev->mtd.erasesize);
- return dev;
-
- err_destroy_mutex:
-@@ -353,9 +361,9 @@ static char block2mtd_paramline[80 + 12]
-
- static int block2mtd_setup2(const char *val)
- {
-- char buf[80 + 12]; /* 80 for device, 12 for erase size */
-+ char buf[80 + 12 + 80]; /* 80 for device, 12 for erase size, 80 for name */
- char *str = buf;
-- char *token[2];
-+ char *token[3];
- char *name;
- size_t erase_size = PAGE_SIZE;
- int i, ret;
-@@ -368,7 +376,7 @@ static int block2mtd_setup2(const char *
- strcpy(str, val);
- kill_final_newline(str);
-
-- for (i = 0; i < 2; i++)
-+ for (i = 0; i < 3; i++)
- token[i] = strsep(&str, ",");
-
- if (str) {
-@@ -394,8 +402,10 @@ static int block2mtd_setup2(const char *
- return 0;
- }
- }
-+ if (token[2] && (strlen(token[2]) + 1 > 80))
-+ pr_err("mtd device name too long\n");
-
-- add_device(name, erase_size);
-+ add_device(name, erase_size, token[2]);
-
- return 0;
- }
-@@ -429,7 +439,7 @@ static int block2mtd_setup(const char *v
-
-
- module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
--MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
-+MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
-
- static int __init block2mtd_init(void)
- {
+++ /dev/null
---- a/drivers/mtd/devices/block2mtd.c
-+++ b/drivers/mtd/devices/block2mtd.c
-@@ -10,6 +10,7 @@
- #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
- #include <linux/module.h>
-+#include <linux/delay.h>
- #include <linux/fs.h>
- #include <linux/blkdev.h>
- #include <linux/bio.h>
-@@ -210,13 +211,16 @@ static void block2mtd_free_device(struct
- }
-
-
--static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
-+static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname, int timeout)
- {
- const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
-- struct block_device *bdev;
-+ struct block_device *bdev = ERR_PTR(-ENODEV);
- struct block2mtd_dev *dev;
- struct mtd_partition *part;
- char *name;
-+#ifndef MODULE
-+ int i;
-+#endif
-
- if (!devname)
- return NULL;
-@@ -227,15 +231,20 @@ static struct block2mtd_dev *add_device(
-
- /* Get a handle on the device */
- bdev = blkdev_get_by_path(devname, mode, dev);
-+
- #ifndef MODULE
-- if (IS_ERR(bdev)) {
-+ for (i = 0; IS_ERR(bdev) && i <= timeout; i++) {
-+ dev_t devt;
-
-- /* We might not have rootfs mounted at this point. Try
-- to resolve the device name by other means. */
-+ if (i)
-+ msleep(1000);
-+ wait_for_device_probe();
-+
-+ devt = name_to_dev_t(devname);
-+ if (!devt)
-+ continue;
-
-- dev_t devt = name_to_dev_t(devname);
-- if (devt)
-- bdev = blkdev_get_by_dev(devt, mode, dev);
-+ bdev = blkdev_get_by_dev(devt, mode, dev);
- }
- #endif
-
-@@ -361,11 +370,12 @@ static char block2mtd_paramline[80 + 12]
-
- static int block2mtd_setup2(const char *val)
- {
-- char buf[80 + 12 + 80]; /* 80 for device, 12 for erase size, 80 for name */
-+ char buf[80 + 12 + 80 + 8]; /* 80 for device, 12 for erase size, 80 for name, 8 for timeout */
- char *str = buf;
-- char *token[3];
-+ char *token[4];
- char *name;
- size_t erase_size = PAGE_SIZE;
-+ unsigned long timeout = 0;
- int i, ret;
-
- if (strnlen(val, sizeof(buf)) >= sizeof(buf)) {
-@@ -376,7 +386,7 @@ static int block2mtd_setup2(const char *
- strcpy(str, val);
- kill_final_newline(str);
-
-- for (i = 0; i < 3; i++)
-+ for (i = 0; i < 4; i++)
- token[i] = strsep(&str, ",");
-
- if (str) {
-@@ -405,7 +415,10 @@ static int block2mtd_setup2(const char *
- if (token[2] && (strlen(token[2]) + 1 > 80))
- pr_err("mtd device name too long\n");
-
-- add_device(name, erase_size, token[2]);
-+ if (token[3] && kstrtoul(token[3], 0, &timeout))
-+ pr_err("invalid timeout\n");
-+
-+ add_device(name, erase_size, token[2], timeout);
-
- return 0;
- }
-@@ -439,7 +452,7 @@ static int block2mtd_setup(const char *v
-
-
- module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
--MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
-+MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>[,<timeout>]]]\"");
-
- static int __init block2mtd_init(void)
- {
-@@ -474,7 +487,7 @@ static void block2mtd_exit(void)
- }
-
-
--module_init(block2mtd_init);
-+late_initcall(block2mtd_init);
- module_exit(block2mtd_exit);
-
- MODULE_LICENSE("GPL");
+++ /dev/null
----
- drivers/mtd/nand/plat_nand.c | 13 ++++++++++++-
- include/linux/mtd/nand.h | 1 +
- 2 files changed, 13 insertions(+), 1 deletion(-)
-
---- a/include/linux/mtd/nand.h
-+++ b/include/linux/mtd/nand.h
-@@ -851,6 +851,7 @@ struct platform_nand_chip {
- unsigned int options;
- unsigned int bbt_options;
- const char **part_probe_types;
-+ int (*chip_fixup)(struct mtd_info *mtd);
- };
-
- /* Keep gcc happy */
---- a/drivers/mtd/nand/plat_nand.c
-+++ b/drivers/mtd/nand/plat_nand.c
-@@ -90,7 +90,18 @@ static int plat_nand_probe(struct platfo
- }
-
- /* Scan to find existence of the device */
-- if (nand_scan(&data->mtd, pdata->chip.nr_chips)) {
-+ if (nand_scan_ident(&data->mtd, pdata->chip.nr_chips, NULL)) {
-+ err = -ENXIO;
-+ goto out;
-+ }
-+
-+ if (pdata->chip.chip_fixup) {
-+ err = pdata->chip.chip_fixup(&data->mtd);
-+ if (err)
-+ goto out;
-+ }
-+
-+ if (nand_scan_tail(&data->mtd)) {
- err = -ENXIO;
- goto out;
- }
+++ /dev/null
---- a/drivers/mtd/nand/nand_ecc.c
-+++ b/drivers/mtd/nand/nand_ecc.c
-@@ -507,7 +507,7 @@ int __nand_correct_data(unsigned char *b
- return 1; /* error in ECC data; no action needed */
-
- pr_err("%s: uncorrectable ECC error\n", __func__);
-- return -1;
-+ return -EBADMSG;
- }
- EXPORT_SYMBOL(__nand_correct_data);
-
+++ /dev/null
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -809,7 +809,7 @@ static int get_chip(struct map_info *map
- return 0;
-
- case FL_ERASING:
-- if (!cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
-+ if (1 /* no suspend */ || !cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
- !(mode == FL_READY || mode == FL_POINT ||
- (mode == FL_WRITING && (cfip->EraseSuspend & 0x2))))
- goto sleep;
+++ /dev/null
-From: George Kashperko <george@znau.edu.ua>
-
-Issue map read after Write Buffer Load command to ensure chip is ready
-to receive data.
-Signed-off-by: George Kashperko <george@znau.edu.ua>
----
- drivers/mtd/chips/cfi_cmdset_0002.c | 1 +
- 1 file changed, 1 insertion(+)
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1830,6 +1830,7 @@ static int __xipram do_write_buffer(stru
-
- /* Write Buffer Load */
- map_write(map, CMD(0x25), cmd_adr);
-+ (void) map_read(map, cmd_adr);
-
- chip->state = FL_WRITING_TO_BUFFER;
-
+++ /dev/null
-From eef9dfc4e821408af1af13aa0cc707fc496fb7c6 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 11 Dec 2013 19:05:59 +0100
-Subject: [PATCH] m25p80: add support for the Winbond W25X05 flash
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/devices/m25p80.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -618,6 +618,7 @@ static const struct spi_device_id spi_no
- { "m25px80", INFO(0x207114, 0, 64 * 1024, 16, 0) },
-
- /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
-+ { "w25x05", INFO(0xef3010, 0, 64 * 1024, 1, SECT_4K) },
- { "w25x10", INFO(0xef3011, 0, 64 * 1024, 2, SECT_4K) },
- { "w25x20", INFO(0xef3012, 0, 64 * 1024, 4, SECT_4K) },
- { "w25x40", INFO(0xef3013, 0, 64 * 1024, 8, SECT_4K) },
+++ /dev/null
-From 0d7388de0911c1a4fc4a8a3898ef9d0ab818ca08 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Tue, 7 Apr 2015 18:35:15 +0200
-Subject: [PATCH] mtd: spi-nor: add support for the Macronix MX25L512E SPI
- flash chip
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/spi-nor/spi-nor.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -518,6 +518,7 @@ static const struct spi_device_id spi_no
- { "640s33b", INFO(0x898913, 0, 64 * 1024, 128, 0) },
-
- /* Macronix */
-+ { "mx25l512e", INFO(0xc22010, 0, 64 * 1024, 1, SECT_4K) },
- { "mx25l2005a", INFO(0xc22012, 0, 64 * 1024, 4, SECT_4K) },
- { "mx25l4005a", INFO(0xc22013, 0, 64 * 1024, 8, SECT_4K) },
- { "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16, 0) },
+++ /dev/null
-From 34e2b403040a2f9d3ba071d95a7f42457e2950f9 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Tue, 7 Apr 2015 18:35:15 +0200
-Subject: [PATCH] mtd: spi-nor: add support for the ISSI SI25CD512 SPI flash
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/spi-nor/spi-nor.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -517,6 +517,9 @@ static const struct spi_device_id spi_no
- { "320s33b", INFO(0x898912, 0, 64 * 1024, 64, 0) },
- { "640s33b", INFO(0x898913, 0, 64 * 1024, 128, 0) },
-
-+ /* ISSI */
-+ { "is25cd512", INFO(0x7f9d20, 0, 32 * 1024, 2, SECT_4K) },
-+
- /* Macronix */
- { "mx25l512e", INFO(0xc22010, 0, 64 * 1024, 1, SECT_4K) },
- { "mx25l2005a", INFO(0xc22012, 0, 64 * 1024, 4, SECT_4K) },
+++ /dev/null
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -532,6 +532,7 @@ static const struct spi_device_id spi_no
- { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
- { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
- { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) },
-+ { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, 0) },
- { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
- { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_QUAD_READ) },
- { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
+++ /dev/null
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -37,6 +37,7 @@
- #include <linux/backing-dev.h>
- #include <linux/gfp.h>
- #include <linux/slab.h>
-+#include <linux/root_dev.h>
-
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-@@ -456,6 +457,15 @@ int add_mtd_device(struct mtd_info *mtd)
- of this try_ nonsense, and no bitching about it
- either. :) */
- __module_get(THIS_MODULE);
-+
-+ if (!strcmp(mtd->name, "rootfs") &&
-+ config_enabled(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
-+ ROOT_DEV == 0) {
-+ pr_notice("mtd: device %d (%s) set to be root filesystem\n",
-+ mtd->index, mtd->name);
-+ ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, mtd->index);
-+ }
-+
- return 0;
-
- fail_added:
+++ /dev/null
-From 8a52e4100d7c3a4a1dfddfa02b8864a9b0068c13 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sat, 17 May 2014 03:36:18 +0200
-Subject: [PATCH 1/5] ubi: auto-attach mtd device named "ubi" or "data" on boot
-To: openwrt-devel@lists.openwrt.org
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/build.c | 36 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 36 insertions(+)
-
---- a/drivers/mtd/ubi/build.c
-+++ b/drivers/mtd/ubi/build.c
-@@ -1212,6 +1212,49 @@ static struct mtd_info * __init open_mtd
- return mtd;
- }
-
-+/*
-+ * This function tries attaching mtd partitions named either "ubi" or "data"
-+ * during boot.
-+ */
-+static void __init ubi_auto_attach(void)
-+{
-+ int err;
-+ struct mtd_info *mtd;
-+
-+ /* try attaching mtd device named "ubi" or "data" */
-+ mtd = open_mtd_device("ubi");
-+ if (IS_ERR(mtd))
-+ mtd = open_mtd_device("data");
-+
-+ if (!IS_ERR(mtd)) {
-+ size_t len;
-+ char magic[4];
-+
-+ /* check for a valid ubi magic */
-+ err = mtd_read(mtd, 0, 4, &len, (void *) magic);
-+ if (!err && len == 4 && strncmp(magic, "UBI#", 4)) {
-+ ubi_err("no valid UBI magic found inside mtd%d", mtd->index);
-+ put_mtd_device(mtd);
-+ return;
-+ }
-+
-+ /* auto-add only media types where UBI makes sense */
-+ if (mtd->type == MTD_NANDFLASH ||
-+ mtd->type == MTD_NORFLASH ||
-+ mtd->type == MTD_DATAFLASH ||
-+ mtd->type == MTD_MLCNANDFLASH) {
-+ mutex_lock(&ubi_devices_mutex);
-+ ubi_msg("auto-attach mtd%d", mtd->index);
-+ err = ubi_attach_mtd_dev(mtd, UBI_DEV_NUM_AUTO, 0, 0);
-+ mutex_unlock(&ubi_devices_mutex);
-+ if (err < 0) {
-+ ubi_err("cannot attach mtd%d", mtd->index);
-+ put_mtd_device(mtd);
-+ }
-+ }
-+ }
-+}
-+
- static int __init ubi_init(void)
- {
- int err, i, k;
-@@ -1301,6 +1344,12 @@ static int __init ubi_init(void)
- }
- }
-
-+ /* auto-attach mtd devices only if built-in to the kernel and no ubi.mtd
-+ * parameter was given */
-+ if (config_enabled(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
-+ !ubi_is_module() && !mtd_devs)
-+ ubi_auto_attach();
-+
- err = ubiblock_init();
- if (err) {
- ubi_err("block: cannot initialize, error %d", err);
+++ /dev/null
-From 0f3966579815f889bb2fcb4846152c35f65e79c4 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 15 May 2014 21:06:33 +0200
-Subject: [PATCH 2/5] ubi: auto-create ubiblock device for rootfs
-To: openwrt-devel@lists.openwrt.org
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/block.c | 42 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 42 insertions(+)
-
---- a/drivers/mtd/ubi/block.c
-+++ b/drivers/mtd/ubi/block.c
-@@ -615,6 +615,44 @@ static int __init ubiblock_create_from_p
- return ret;
- }
-
-+#define UBIFS_NODE_MAGIC 0x06101831
-+static inline int ubi_vol_is_ubifs(struct ubi_volume_desc *desc)
-+{
-+ int ret;
-+ uint32_t magic_of, magic;
-+ ret = ubi_read(desc, 0, (char *)&magic_of, 0, 4);
-+ if (ret)
-+ return 0;
-+ magic = le32_to_cpu(magic_of);
-+ return magic == UBIFS_NODE_MAGIC;
-+}
-+
-+static void __init ubiblock_create_auto_rootfs(void)
-+{
-+ int ubi_num, ret, is_ubifs;
-+ struct ubi_volume_desc *desc;
-+ struct ubi_volume_info vi;
-+
-+ for (ubi_num = 0; ubi_num < UBI_MAX_DEVICES; ubi_num++) {
-+ desc = ubi_open_volume_nm(ubi_num, "rootfs", UBI_READONLY);
-+ if (IS_ERR(desc))
-+ continue;
-+
-+ ubi_get_volume_info(desc, &vi);
-+ is_ubifs = ubi_vol_is_ubifs(desc);
-+ ubi_close_volume(desc);
-+ if (is_ubifs)
-+ break;
-+
-+ ret = ubiblock_create(&vi);
-+ if (ret)
-+ ubi_err("block: can't add '%s' volume, err=%d\n",
-+ vi.name, ret);
-+ /* always break if we get here */
-+ break;
-+ }
-+}
-+
- static void ubiblock_remove_all(void)
- {
- struct ubiblock *next;
-@@ -645,6 +683,10 @@ int __init ubiblock_init(void)
- if (ret)
- goto err_remove;
-
-+ /* auto-attach "rootfs" volume if existing and non-ubifs */
-+ if (config_enabled(CONFIG_MTD_ROOTFS_ROOT_DEV))
-+ ubiblock_create_auto_rootfs();
-+
- /*
- * Block devices are only created upon user requests, so we ignore
- * existing volumes.
+++ /dev/null
-From eea9e1785e4c05c2a3444506aabafa0ae958538f Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sat, 17 May 2014 03:35:02 +0200
-Subject: [PATCH 4/5] try auto-mounting ubi0:rootfs in init/do_mounts.c
-To: openwrt-devel@lists.openwrt.org
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- init/do_mounts.c | 26 +++++++++++++++++++++++++-
- 1 file changed, 25 insertions(+), 1 deletion(-)
-
---- a/init/do_mounts.c
-+++ b/init/do_mounts.c
-@@ -433,7 +433,28 @@ retry:
- out:
- put_page(page);
- }
--
-+
-+static int __init mount_ubi_rootfs(void)
-+{
-+ int flags = MS_SILENT;
-+ int err, tried = 0;
-+
-+ while (tried < 2) {
-+ err = do_mount_root("ubi0:rootfs", "ubifs", flags, \
-+ root_mount_data);
-+ switch (err) {
-+ case -EACCES:
-+ flags |= MS_RDONLY;
-+ tried++;
-+ break;
-+ default:
-+ return err;
-+ }
-+ }
-+
-+ return -EINVAL;
-+}
-+
- #ifdef CONFIG_ROOT_NFS
-
- #define NFSROOT_TIMEOUT_MIN 5
-@@ -527,6 +548,10 @@ void __init mount_root(void)
- change_floppy("root floppy");
- }
- #endif
-+#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
-+ if (!mount_ubi_rootfs())
-+ return;
-+#endif
- #ifdef CONFIG_BLOCK
- create_dev("/dev/root", ROOT_DEV);
- mount_block_root("/dev/root", root_mountflags);
+++ /dev/null
-From cd68d1b12b5ea4c01a664c064179ada42bf55d3d Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 15 May 2014 20:55:42 +0200
-Subject: [PATCH 5/5] ubi: set ROOT_DEV to ubiblock "rootfs" if unset
-To: openwrt-devel@lists.openwrt.org
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/block.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/mtd/ubi/block.c
-+++ b/drivers/mtd/ubi/block.c
-@@ -48,6 +48,7 @@
- #include <linux/blkdev.h>
- #include <linux/hdreg.h>
- #include <asm/div64.h>
-+#include <linux/root_dev.h>
-
- #include "ubi-media.h"
- #include "ubi.h"
-@@ -448,6 +449,15 @@ int ubiblock_create(struct ubi_volume_in
- add_disk(dev->gd);
- ubi_msg("%s created from ubi%d:%d(%s)",
- dev->gd->disk_name, dev->ubi_num, dev->vol_id, vi->name);
-+
-+ if (!strcmp(vi->name, "rootfs") &&
-+ config_enabled(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
-+ ROOT_DEV == 0) {
-+ pr_notice("ubiblock: device ubiblock%d_%d (%s) set to be root filesystem\n",
-+ dev->ubi_num, dev->vol_id, vi->name);
-+ ROOT_DEV = MKDEV(gd->major, gd->first_minor);
-+ }
-+
- return 0;
-
- out_free_queue:
+++ /dev/null
---- a/drivers/mtd/ubi/attach.c
-+++ b/drivers/mtd/ubi/attach.c
-@@ -800,6 +800,13 @@ out_unlock:
- return err;
- }
-
-+static bool ec_hdr_has_eof(struct ubi_ec_hdr *ech)
-+{
-+ return ech->padding1[0] == 'E' &&
-+ ech->padding1[1] == 'O' &&
-+ ech->padding1[2] == 'F';
-+}
-+
- /**
- * scan_peb - scan and process UBI headers of a PEB.
- * @ubi: UBI device description object
-@@ -830,9 +837,21 @@ static int scan_peb(struct ubi_device *u
- return 0;
- }
-
-- err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
-- if (err < 0)
-- return err;
-+ if (!ai->eof_found) {
-+ err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
-+ if (err < 0)
-+ return err;
-+
-+ if (ec_hdr_has_eof(ech)) {
-+ ubi_msg("EOF marker found, PEBs from %d will be erased",
-+ pnum);
-+ ai->eof_found = true;
-+ }
-+ }
-+
-+ if (ai->eof_found)
-+ err = UBI_IO_FF_BITFLIPS;
-+
- switch (err) {
- case 0:
- break;
---- a/drivers/mtd/ubi/ubi.h
-+++ b/drivers/mtd/ubi/ubi.h
-@@ -705,6 +705,7 @@ struct ubi_attach_info {
- int mean_ec;
- uint64_t ec_sum;
- int ec_count;
-+ bool eof_found;
- struct kmem_cache *aeb_slab_cache;
- };
-
+++ /dev/null
---- a/fs/jffs2/Kconfig
-+++ b/fs/jffs2/Kconfig
-@@ -139,6 +139,15 @@ config JFFS2_LZO
- This feature was added in July, 2007. Say 'N' if you need
- compatibility with older bootloaders or kernels.
-
-+config JFFS2_LZMA
-+ bool "JFFS2 LZMA compression support" if JFFS2_COMPRESSION_OPTIONS
-+ select LZMA_COMPRESS
-+ select LZMA_DECOMPRESS
-+ depends on JFFS2_FS
-+ default n
-+ help
-+ JFFS2 wrapper to the LZMA C SDK
-+
- config JFFS2_RTIME
- bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
- depends on JFFS2_FS
---- a/fs/jffs2/Makefile
-+++ b/fs/jffs2/Makefile
-@@ -18,4 +18,7 @@ jffs2-$(CONFIG_JFFS2_RUBIN) += compr_rub
- jffs2-$(CONFIG_JFFS2_RTIME) += compr_rtime.o
- jffs2-$(CONFIG_JFFS2_ZLIB) += compr_zlib.o
- jffs2-$(CONFIG_JFFS2_LZO) += compr_lzo.o
-+jffs2-$(CONFIG_JFFS2_LZMA) += compr_lzma.o
- jffs2-$(CONFIG_JFFS2_SUMMARY) += summary.o
-+
-+CFLAGS_compr_lzma.o += -Iinclude/linux -Ilib/lzma
---- a/fs/jffs2/compr.c
-+++ b/fs/jffs2/compr.c
-@@ -378,6 +378,9 @@ int __init jffs2_compressors_init(void)
- #ifdef CONFIG_JFFS2_LZO
- jffs2_lzo_init();
- #endif
-+#ifdef CONFIG_JFFS2_LZMA
-+ jffs2_lzma_init();
-+#endif
- /* Setting default compression mode */
- #ifdef CONFIG_JFFS2_CMODE_NONE
- jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
-@@ -401,6 +404,9 @@ int __init jffs2_compressors_init(void)
- int jffs2_compressors_exit(void)
- {
- /* Unregistering compressors */
-+#ifdef CONFIG_JFFS2_LZMA
-+ jffs2_lzma_exit();
-+#endif
- #ifdef CONFIG_JFFS2_LZO
- jffs2_lzo_exit();
- #endif
---- a/fs/jffs2/compr.h
-+++ b/fs/jffs2/compr.h
-@@ -29,9 +29,9 @@
- #define JFFS2_DYNRUBIN_PRIORITY 20
- #define JFFS2_LZARI_PRIORITY 30
- #define JFFS2_RTIME_PRIORITY 50
--#define JFFS2_ZLIB_PRIORITY 60
--#define JFFS2_LZO_PRIORITY 80
--
-+#define JFFS2_LZMA_PRIORITY 70
-+#define JFFS2_ZLIB_PRIORITY 80
-+#define JFFS2_LZO_PRIORITY 90
-
- #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */
- #define JFFS2_DYNRUBIN_DISABLED /* for decompression */
-@@ -101,5 +101,9 @@ void jffs2_zlib_exit(void);
- int jffs2_lzo_init(void);
- void jffs2_lzo_exit(void);
- #endif
-+#ifdef CONFIG_JFFS2_LZMA
-+int jffs2_lzma_init(void);
-+void jffs2_lzma_exit(void);
-+#endif
-
- #endif /* __JFFS2_COMPR_H__ */
---- /dev/null
-+++ b/fs/jffs2/compr_lzma.c
-@@ -0,0 +1,128 @@
-+/*
-+ * JFFS2 -- Journalling Flash File System, Version 2.
-+ *
-+ * For licensing information, see the file 'LICENCE' in this directory.
-+ *
-+ * JFFS2 wrapper to the LZMA C SDK
-+ *
-+ */
-+
-+#include <linux/lzma.h>
-+#include "compr.h"
-+
-+#ifdef __KERNEL__
-+ static DEFINE_MUTEX(deflate_mutex);
-+#endif
-+
-+CLzmaEncHandle *p;
-+Byte propsEncoded[LZMA_PROPS_SIZE];
-+SizeT propsSize = sizeof(propsEncoded);
-+
-+STATIC void lzma_free_workspace(void)
-+{
-+ LzmaEnc_Destroy(p, &lzma_alloc, &lzma_alloc);
-+}
-+
-+STATIC int INIT lzma_alloc_workspace(CLzmaEncProps *props)
-+{
-+ if ((p = (CLzmaEncHandle *)LzmaEnc_Create(&lzma_alloc)) == NULL)
-+ {
-+ PRINT_ERROR("Failed to allocate lzma deflate workspace\n");
-+ return -ENOMEM;
-+ }
-+
-+ if (LzmaEnc_SetProps(p, props) != SZ_OK)
-+ {
-+ lzma_free_workspace();
-+ return -1;
-+ }
-+
-+ if (LzmaEnc_WriteProperties(p, propsEncoded, &propsSize) != SZ_OK)
-+ {
-+ lzma_free_workspace();
-+ return -1;
-+ }
-+
-+ return 0;
-+}
-+
-+STATIC int jffs2_lzma_compress(unsigned char *data_in, unsigned char *cpage_out,
-+ uint32_t *sourcelen, uint32_t *dstlen)
-+{
-+ SizeT compress_size = (SizeT)(*dstlen);
-+ int ret;
-+
-+ #ifdef __KERNEL__
-+ mutex_lock(&deflate_mutex);
-+ #endif
-+
-+ ret = LzmaEnc_MemEncode(p, cpage_out, &compress_size, data_in, *sourcelen,
-+ 0, NULL, &lzma_alloc, &lzma_alloc);
-+
-+ #ifdef __KERNEL__
-+ mutex_unlock(&deflate_mutex);
-+ #endif
-+
-+ if (ret != SZ_OK)
-+ return -1;
-+
-+ *dstlen = (uint32_t)compress_size;
-+
-+ return 0;
-+}
-+
-+STATIC int jffs2_lzma_decompress(unsigned char *data_in, unsigned char *cpage_out,
-+ uint32_t srclen, uint32_t destlen)
-+{
-+ int ret;
-+ SizeT dl = (SizeT)destlen;
-+ SizeT sl = (SizeT)srclen;
-+ ELzmaStatus status;
-+
-+ ret = LzmaDecode(cpage_out, &dl, data_in, &sl, propsEncoded,
-+ propsSize, LZMA_FINISH_ANY, &status, &lzma_alloc);
-+
-+ if (ret != SZ_OK || status == LZMA_STATUS_NOT_FINISHED || dl != (SizeT)destlen)
-+ return -1;
-+
-+ return 0;
-+}
-+
-+static struct jffs2_compressor jffs2_lzma_comp = {
-+ .priority = JFFS2_LZMA_PRIORITY,
-+ .name = "lzma",
-+ .compr = JFFS2_COMPR_LZMA,
-+ .compress = &jffs2_lzma_compress,
-+ .decompress = &jffs2_lzma_decompress,
-+ .disabled = 0,
-+};
-+
-+int INIT jffs2_lzma_init(void)
-+{
-+ int ret;
-+ CLzmaEncProps props;
-+ LzmaEncProps_Init(&props);
-+
-+ props.dictSize = LZMA_BEST_DICT(0x2000);
-+ props.level = LZMA_BEST_LEVEL;
-+ props.lc = LZMA_BEST_LC;
-+ props.lp = LZMA_BEST_LP;
-+ props.pb = LZMA_BEST_PB;
-+ props.fb = LZMA_BEST_FB;
-+
-+ ret = lzma_alloc_workspace(&props);
-+ if (ret < 0)
-+ return ret;
-+
-+ ret = jffs2_register_compressor(&jffs2_lzma_comp);
-+ if (ret)
-+ lzma_free_workspace();
-+
-+ return ret;
-+}
-+
-+void jffs2_lzma_exit(void)
-+{
-+ jffs2_unregister_compressor(&jffs2_lzma_comp);
-+ lzma_free_workspace();
-+}
---- a/fs/jffs2/super.c
-+++ b/fs/jffs2/super.c
-@@ -375,14 +375,41 @@ static int __init init_jffs2_fs(void)
- BUILD_BUG_ON(sizeof(struct jffs2_raw_inode) != 68);
- BUILD_BUG_ON(sizeof(struct jffs2_raw_summary) != 32);
-
-- pr_info("version 2.2."
-+ pr_info("version 2.2"
- #ifdef CONFIG_JFFS2_FS_WRITEBUFFER
- " (NAND)"
- #endif
- #ifdef CONFIG_JFFS2_SUMMARY
-- " (SUMMARY) "
-+ " (SUMMARY)"
- #endif
-- " © 2001-2006 Red Hat, Inc.\n");
-+#ifdef CONFIG_JFFS2_ZLIB
-+ " (ZLIB)"
-+#endif
-+#ifdef CONFIG_JFFS2_LZO
-+ " (LZO)"
-+#endif
-+#ifdef CONFIG_JFFS2_LZMA
-+ " (LZMA)"
-+#endif
-+#ifdef CONFIG_JFFS2_RTIME
-+ " (RTIME)"
-+#endif
-+#ifdef CONFIG_JFFS2_RUBIN
-+ " (RUBIN)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_NONE
-+ " (CMODE_NONE)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_PRIORITY
-+ " (CMODE_PRIORITY)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_SIZE
-+ " (CMODE_SIZE)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_FAVOURLZO
-+ " (CMODE_FAVOURLZO)"
-+#endif
-+ " (c) 2001-2006 Red Hat, Inc.\n");
-
- jffs2_inode_cachep = kmem_cache_create("jffs2_i",
- sizeof(struct jffs2_inode_info),
---- a/include/uapi/linux/jffs2.h
-+++ b/include/uapi/linux/jffs2.h
-@@ -46,6 +46,7 @@
- #define JFFS2_COMPR_DYNRUBIN 0x05
- #define JFFS2_COMPR_ZLIB 0x06
- #define JFFS2_COMPR_LZO 0x07
-+#define JFFS2_COMPR_LZMA 0x08
- /* Compatibility flags. */
- #define JFFS2_COMPAT_MASK 0xc000 /* What do to if an unknown nodetype is found */
- #define JFFS2_NODE_ACCURATE 0x2000
---- /dev/null
-+++ b/include/linux/lzma.h
-@@ -0,0 +1,62 @@
-+#ifndef __LZMA_H__
-+#define __LZMA_H__
-+
-+#ifdef __KERNEL__
-+ #include <linux/kernel.h>
-+ #include <linux/sched.h>
-+ #include <linux/slab.h>
-+ #include <linux/vmalloc.h>
-+ #include <linux/init.h>
-+ #define LZMA_MALLOC vmalloc
-+ #define LZMA_FREE vfree
-+ #define PRINT_ERROR(msg) printk(KERN_WARNING #msg)
-+ #define INIT __init
-+ #define STATIC static
-+#else
-+ #include <stdint.h>
-+ #include <stdlib.h>
-+ #include <stdio.h>
-+ #include <unistd.h>
-+ #include <string.h>
-+ #include <asm/types.h>
-+ #include <errno.h>
-+ #include <linux/jffs2.h>
-+ #ifndef PAGE_SIZE
-+ extern int page_size;
-+ #define PAGE_SIZE page_size
-+ #endif
-+ #define LZMA_MALLOC malloc
-+ #define LZMA_FREE free
-+ #define PRINT_ERROR(msg) fprintf(stderr, msg)
-+ #define INIT
-+ #define STATIC
-+#endif
-+
-+#include "lzma/LzmaDec.h"
-+#include "lzma/LzmaEnc.h"
-+
-+#define LZMA_BEST_LEVEL (9)
-+#define LZMA_BEST_LC (0)
-+#define LZMA_BEST_LP (0)
-+#define LZMA_BEST_PB (0)
-+#define LZMA_BEST_FB (273)
-+
-+#define LZMA_BEST_DICT(n) (((int)((n) / 2)) * 2)
-+
-+static void *p_lzma_malloc(void *p, size_t size)
-+{
-+ if (size == 0)
-+ return NULL;
-+
-+ return LZMA_MALLOC(size);
-+}
-+
-+static void p_lzma_free(void *p, void *address)
-+{
-+ if (address != NULL)
-+ LZMA_FREE(address);
-+}
-+
-+static ISzAlloc lzma_alloc = {p_lzma_malloc, p_lzma_free};
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzFind.h
-@@ -0,0 +1,115 @@
-+/* LzFind.h -- Match finder for LZ algorithms
-+2009-04-22 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZ_FIND_H
-+#define __LZ_FIND_H
-+
-+#include "Types.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+typedef UInt32 CLzRef;
-+
-+typedef struct _CMatchFinder
-+{
-+ Byte *buffer;
-+ UInt32 pos;
-+ UInt32 posLimit;
-+ UInt32 streamPos;
-+ UInt32 lenLimit;
-+
-+ UInt32 cyclicBufferPos;
-+ UInt32 cyclicBufferSize; /* it must be = (historySize + 1) */
-+
-+ UInt32 matchMaxLen;
-+ CLzRef *hash;
-+ CLzRef *son;
-+ UInt32 hashMask;
-+ UInt32 cutValue;
-+
-+ Byte *bufferBase;
-+ ISeqInStream *stream;
-+ int streamEndWasReached;
-+
-+ UInt32 blockSize;
-+ UInt32 keepSizeBefore;
-+ UInt32 keepSizeAfter;
-+
-+ UInt32 numHashBytes;
-+ int directInput;
-+ size_t directInputRem;
-+ int btMode;
-+ int bigHash;
-+ UInt32 historySize;
-+ UInt32 fixedHashSize;
-+ UInt32 hashSizeSum;
-+ UInt32 numSons;
-+ SRes result;
-+ UInt32 crc[256];
-+} CMatchFinder;
-+
-+#define Inline_MatchFinder_GetPointerToCurrentPos(p) ((p)->buffer)
-+#define Inline_MatchFinder_GetIndexByte(p, index) ((p)->buffer[(Int32)(index)])
-+
-+#define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos)
-+
-+int MatchFinder_NeedMove(CMatchFinder *p);
-+Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p);
-+void MatchFinder_MoveBlock(CMatchFinder *p);
-+void MatchFinder_ReadIfRequired(CMatchFinder *p);
-+
-+void MatchFinder_Construct(CMatchFinder *p);
-+
-+/* Conditions:
-+ historySize <= 3 GB
-+ keepAddBufferBefore + matchMaxLen + keepAddBufferAfter < 511MB
-+*/
-+int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
-+ UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
-+ ISzAlloc *alloc);
-+void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
-+void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems);
-+void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue);
-+
-+UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son,
-+ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue,
-+ UInt32 *distances, UInt32 maxLen);
-+
-+/*
-+Conditions:
-+ Mf_GetNumAvailableBytes_Func must be called before each Mf_GetMatchLen_Func.
-+ Mf_GetPointerToCurrentPos_Func's result must be used only before any other function
-+*/
-+
-+typedef void (*Mf_Init_Func)(void *object);
-+typedef Byte (*Mf_GetIndexByte_Func)(void *object, Int32 index);
-+typedef UInt32 (*Mf_GetNumAvailableBytes_Func)(void *object);
-+typedef const Byte * (*Mf_GetPointerToCurrentPos_Func)(void *object);
-+typedef UInt32 (*Mf_GetMatches_Func)(void *object, UInt32 *distances);
-+typedef void (*Mf_Skip_Func)(void *object, UInt32);
-+
-+typedef struct _IMatchFinder
-+{
-+ Mf_Init_Func Init;
-+ Mf_GetIndexByte_Func GetIndexByte;
-+ Mf_GetNumAvailableBytes_Func GetNumAvailableBytes;
-+ Mf_GetPointerToCurrentPos_Func GetPointerToCurrentPos;
-+ Mf_GetMatches_Func GetMatches;
-+ Mf_Skip_Func Skip;
-+} IMatchFinder;
-+
-+void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable);
-+
-+void MatchFinder_Init(CMatchFinder *p);
-+UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
-+UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
-+void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
-+void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzHash.h
-@@ -0,0 +1,54 @@
-+/* LzHash.h -- HASH functions for LZ algorithms
-+2009-02-07 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZ_HASH_H
-+#define __LZ_HASH_H
-+
-+#define kHash2Size (1 << 10)
-+#define kHash3Size (1 << 16)
-+#define kHash4Size (1 << 20)
-+
-+#define kFix3HashSize (kHash2Size)
-+#define kFix4HashSize (kHash2Size + kHash3Size)
-+#define kFix5HashSize (kHash2Size + kHash3Size + kHash4Size)
-+
-+#define HASH2_CALC hashValue = cur[0] | ((UInt32)cur[1] << 8);
-+
-+#define HASH3_CALC { \
-+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+ hash2Value = temp & (kHash2Size - 1); \
-+ hashValue = (temp ^ ((UInt32)cur[2] << 8)) & p->hashMask; }
-+
-+#define HASH4_CALC { \
-+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+ hash2Value = temp & (kHash2Size - 1); \
-+ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
-+ hashValue = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & p->hashMask; }
-+
-+#define HASH5_CALC { \
-+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+ hash2Value = temp & (kHash2Size - 1); \
-+ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
-+ hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)); \
-+ hashValue = (hash4Value ^ (p->crc[cur[4]] << 3)) & p->hashMask; \
-+ hash4Value &= (kHash4Size - 1); }
-+
-+/* #define HASH_ZIP_CALC hashValue = ((cur[0] | ((UInt32)cur[1] << 8)) ^ p->crc[cur[2]]) & 0xFFFF; */
-+#define HASH_ZIP_CALC hashValue = ((cur[2] | ((UInt32)cur[0] << 8)) ^ p->crc[cur[1]]) & 0xFFFF;
-+
-+
-+#define MT_HASH2_CALC \
-+ hash2Value = (p->crc[cur[0]] ^ cur[1]) & (kHash2Size - 1);
-+
-+#define MT_HASH3_CALC { \
-+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+ hash2Value = temp & (kHash2Size - 1); \
-+ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); }
-+
-+#define MT_HASH4_CALC { \
-+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+ hash2Value = temp & (kHash2Size - 1); \
-+ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
-+ hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & (kHash4Size - 1); }
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzmaDec.h
-@@ -0,0 +1,231 @@
-+/* LzmaDec.h -- LZMA Decoder
-+2009-02-07 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZMA_DEC_H
-+#define __LZMA_DEC_H
-+
-+#include "Types.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+/* #define _LZMA_PROB32 */
-+/* _LZMA_PROB32 can increase the speed on some CPUs,
-+ but memory usage for CLzmaDec::probs will be doubled in that case */
-+
-+#ifdef _LZMA_PROB32
-+#define CLzmaProb UInt32
-+#else
-+#define CLzmaProb UInt16
-+#endif
-+
-+
-+/* ---------- LZMA Properties ---------- */
-+
-+#define LZMA_PROPS_SIZE 5
-+
-+typedef struct _CLzmaProps
-+{
-+ unsigned lc, lp, pb;
-+ UInt32 dicSize;
-+} CLzmaProps;
-+
-+/* LzmaProps_Decode - decodes properties
-+Returns:
-+ SZ_OK
-+ SZ_ERROR_UNSUPPORTED - Unsupported properties
-+*/
-+
-+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
-+
-+
-+/* ---------- LZMA Decoder state ---------- */
-+
-+/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case.
-+ Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */
-+
-+#define LZMA_REQUIRED_INPUT_MAX 20
-+
-+typedef struct
-+{
-+ CLzmaProps prop;
-+ CLzmaProb *probs;
-+ Byte *dic;
-+ const Byte *buf;
-+ UInt32 range, code;
-+ SizeT dicPos;
-+ SizeT dicBufSize;
-+ UInt32 processedPos;
-+ UInt32 checkDicSize;
-+ unsigned state;
-+ UInt32 reps[4];
-+ unsigned remainLen;
-+ int needFlush;
-+ int needInitState;
-+ UInt32 numProbs;
-+ unsigned tempBufSize;
-+ Byte tempBuf[LZMA_REQUIRED_INPUT_MAX];
-+} CLzmaDec;
-+
-+#define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
-+
-+void LzmaDec_Init(CLzmaDec *p);
-+
-+/* There are two types of LZMA streams:
-+ 0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
-+ 1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
-+
-+typedef enum
-+{
-+ LZMA_FINISH_ANY, /* finish at any point */
-+ LZMA_FINISH_END /* block must be finished at the end */
-+} ELzmaFinishMode;
-+
-+/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!!
-+
-+ You must use LZMA_FINISH_END, when you know that current output buffer
-+ covers last bytes of block. In other cases you must use LZMA_FINISH_ANY.
-+
-+ If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK,
-+ and output value of destLen will be less than output buffer size limit.
-+ You can check status result also.
-+
-+ You can use multiple checks to test data integrity after full decompression:
-+ 1) Check Result and "status" variable.
-+ 2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
-+ 3) Check that output(srcLen) = compressedSize, if you know real compressedSize.
-+ You must use correct finish mode in that case. */
-+
-+typedef enum
-+{
-+ LZMA_STATUS_NOT_SPECIFIED, /* use main error code instead */
-+ LZMA_STATUS_FINISHED_WITH_MARK, /* stream was finished with end mark. */
-+ LZMA_STATUS_NOT_FINISHED, /* stream was not finished */
-+ LZMA_STATUS_NEEDS_MORE_INPUT, /* you must provide more input bytes */
-+ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK /* there is probability that stream was finished without end mark */
-+} ELzmaStatus;
-+
-+/* ELzmaStatus is used only as output value for function call */
-+
-+
-+/* ---------- Interfaces ---------- */
-+
-+/* There are 3 levels of interfaces:
-+ 1) Dictionary Interface
-+ 2) Buffer Interface
-+ 3) One Call Interface
-+ You can select any of these interfaces, but don't mix functions from different
-+ groups for same object. */
-+
-+
-+/* There are two variants to allocate state for Dictionary Interface:
-+ 1) LzmaDec_Allocate / LzmaDec_Free
-+ 2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
-+ You can use variant 2, if you set dictionary buffer manually.
-+ For Buffer Interface you must always use variant 1.
-+
-+LzmaDec_Allocate* can return:
-+ SZ_OK
-+ SZ_ERROR_MEM - Memory allocation error
-+ SZ_ERROR_UNSUPPORTED - Unsupported properties
-+*/
-+
-+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
-+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
-+
-+SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
-+void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
-+
-+/* ---------- Dictionary Interface ---------- */
-+
-+/* You can use it, if you want to eliminate the overhead for data copying from
-+ dictionary to some other external buffer.
-+ You must work with CLzmaDec variables directly in this interface.
-+
-+ STEPS:
-+ LzmaDec_Constr()
-+ LzmaDec_Allocate()
-+ for (each new stream)
-+ {
-+ LzmaDec_Init()
-+ while (it needs more decompression)
-+ {
-+ LzmaDec_DecodeToDic()
-+ use data from CLzmaDec::dic and update CLzmaDec::dicPos
-+ }
-+ }
-+ LzmaDec_Free()
-+*/
-+
-+/* LzmaDec_DecodeToDic
-+
-+ The decoding to internal dictionary buffer (CLzmaDec::dic).
-+ You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
-+
-+finishMode:
-+ It has meaning only if the decoding reaches output limit (dicLimit).
-+ LZMA_FINISH_ANY - Decode just dicLimit bytes.
-+ LZMA_FINISH_END - Stream must be finished after dicLimit.
-+
-+Returns:
-+ SZ_OK
-+ status:
-+ LZMA_STATUS_FINISHED_WITH_MARK
-+ LZMA_STATUS_NOT_FINISHED
-+ LZMA_STATUS_NEEDS_MORE_INPUT
-+ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
-+ SZ_ERROR_DATA - Data error
-+*/
-+
-+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
-+ const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
-+
-+
-+/* ---------- Buffer Interface ---------- */
-+
-+/* It's zlib-like interface.
-+ See LzmaDec_DecodeToDic description for information about STEPS and return results,
-+ but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
-+ to work with CLzmaDec variables manually.
-+
-+finishMode:
-+ It has meaning only if the decoding reaches output limit (*destLen).
-+ LZMA_FINISH_ANY - Decode just destLen bytes.
-+ LZMA_FINISH_END - Stream must be finished after (*destLen).
-+*/
-+
-+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
-+ const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
-+
-+
-+/* ---------- One Call Interface ---------- */
-+
-+/* LzmaDecode
-+
-+finishMode:
-+ It has meaning only if the decoding reaches output limit (*destLen).
-+ LZMA_FINISH_ANY - Decode just destLen bytes.
-+ LZMA_FINISH_END - Stream must be finished after (*destLen).
-+
-+Returns:
-+ SZ_OK
-+ status:
-+ LZMA_STATUS_FINISHED_WITH_MARK
-+ LZMA_STATUS_NOT_FINISHED
-+ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
-+ SZ_ERROR_DATA - Data error
-+ SZ_ERROR_MEM - Memory allocation error
-+ SZ_ERROR_UNSUPPORTED - Unsupported properties
-+ SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src).
-+*/
-+
-+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
-+ const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
-+ ELzmaStatus *status, ISzAlloc *alloc);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzmaEnc.h
-@@ -0,0 +1,80 @@
-+/* LzmaEnc.h -- LZMA Encoder
-+2009-02-07 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZMA_ENC_H
-+#define __LZMA_ENC_H
-+
-+#include "Types.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+#define LZMA_PROPS_SIZE 5
-+
-+typedef struct _CLzmaEncProps
-+{
-+ int level; /* 0 <= level <= 9 */
-+ UInt32 dictSize; /* (1 << 12) <= dictSize <= (1 << 27) for 32-bit version
-+ (1 << 12) <= dictSize <= (1 << 30) for 64-bit version
-+ default = (1 << 24) */
-+ int lc; /* 0 <= lc <= 8, default = 3 */
-+ int lp; /* 0 <= lp <= 4, default = 0 */
-+ int pb; /* 0 <= pb <= 4, default = 2 */
-+ int algo; /* 0 - fast, 1 - normal, default = 1 */
-+ int fb; /* 5 <= fb <= 273, default = 32 */
-+ int btMode; /* 0 - hashChain Mode, 1 - binTree mode - normal, default = 1 */
-+ int numHashBytes; /* 2, 3 or 4, default = 4 */
-+ UInt32 mc; /* 1 <= mc <= (1 << 30), default = 32 */
-+ unsigned writeEndMark; /* 0 - do not write EOPM, 1 - write EOPM, default = 0 */
-+ int numThreads; /* 1 or 2, default = 2 */
-+} CLzmaEncProps;
-+
-+void LzmaEncProps_Init(CLzmaEncProps *p);
-+void LzmaEncProps_Normalize(CLzmaEncProps *p);
-+UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2);
-+
-+
-+/* ---------- CLzmaEncHandle Interface ---------- */
-+
-+/* LzmaEnc_* functions can return the following exit codes:
-+Returns:
-+ SZ_OK - OK
-+ SZ_ERROR_MEM - Memory allocation error
-+ SZ_ERROR_PARAM - Incorrect paramater in props
-+ SZ_ERROR_WRITE - Write callback error.
-+ SZ_ERROR_PROGRESS - some break from progress callback
-+ SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version)
-+*/
-+
-+typedef void * CLzmaEncHandle;
-+
-+CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc);
-+void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig);
-+SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props);
-+SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size);
-+SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream,
-+ ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-+SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+ int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-+
-+/* ---------- One Call Interface ---------- */
-+
-+/* LzmaEncode
-+Return code:
-+ SZ_OK - OK
-+ SZ_ERROR_MEM - Memory allocation error
-+ SZ_ERROR_PARAM - Incorrect paramater
-+ SZ_ERROR_OUTPUT_EOF - output buffer overflow
-+ SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version)
-+*/
-+
-+SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+ const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
-+ ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/Types.h
-@@ -0,0 +1,226 @@
-+/* Types.h -- Basic types
-+2009-11-23 : Igor Pavlov : Public domain */
-+
-+#ifndef __7Z_TYPES_H
-+#define __7Z_TYPES_H
-+
-+#include <stddef.h>
-+
-+#ifdef _WIN32
-+#include <windows.h>
-+#endif
-+
-+#ifndef EXTERN_C_BEGIN
-+#ifdef __cplusplus
-+#define EXTERN_C_BEGIN extern "C" {
-+#define EXTERN_C_END }
-+#else
-+#define EXTERN_C_BEGIN
-+#define EXTERN_C_END
-+#endif
-+#endif
-+
-+EXTERN_C_BEGIN
-+
-+#define SZ_OK 0
-+
-+#define SZ_ERROR_DATA 1
-+#define SZ_ERROR_MEM 2
-+#define SZ_ERROR_CRC 3
-+#define SZ_ERROR_UNSUPPORTED 4
-+#define SZ_ERROR_PARAM 5
-+#define SZ_ERROR_INPUT_EOF 6
-+#define SZ_ERROR_OUTPUT_EOF 7
-+#define SZ_ERROR_READ 8
-+#define SZ_ERROR_WRITE 9
-+#define SZ_ERROR_PROGRESS 10
-+#define SZ_ERROR_FAIL 11
-+#define SZ_ERROR_THREAD 12
-+
-+#define SZ_ERROR_ARCHIVE 16
-+#define SZ_ERROR_NO_ARCHIVE 17
-+
-+typedef int SRes;
-+
-+#ifdef _WIN32
-+typedef DWORD WRes;
-+#else
-+typedef int WRes;
-+#endif
-+
-+#ifndef RINOK
-+#define RINOK(x) { int __result__ = (x); if (__result__ != 0) return __result__; }
-+#endif
-+
-+typedef unsigned char Byte;
-+typedef short Int16;
-+typedef unsigned short UInt16;
-+
-+#ifdef _LZMA_UINT32_IS_ULONG
-+typedef long Int32;
-+typedef unsigned long UInt32;
-+#else
-+typedef int Int32;
-+typedef unsigned int UInt32;
-+#endif
-+
-+#ifdef _SZ_NO_INT_64
-+
-+/* define _SZ_NO_INT_64, if your compiler doesn't support 64-bit integers.
-+ NOTES: Some code will work incorrectly in that case! */
-+
-+typedef long Int64;
-+typedef unsigned long UInt64;
-+
-+#else
-+
-+#if defined(_MSC_VER) || defined(__BORLANDC__)
-+typedef __int64 Int64;
-+typedef unsigned __int64 UInt64;
-+#else
-+typedef long long int Int64;
-+typedef unsigned long long int UInt64;
-+#endif
-+
-+#endif
-+
-+#ifdef _LZMA_NO_SYSTEM_SIZE_T
-+typedef UInt32 SizeT;
-+#else
-+typedef size_t SizeT;
-+#endif
-+
-+typedef int Bool;
-+#define True 1
-+#define False 0
-+
-+
-+#ifdef _WIN32
-+#define MY_STD_CALL __stdcall
-+#else
-+#define MY_STD_CALL
-+#endif
-+
-+#ifdef _MSC_VER
-+
-+#if _MSC_VER >= 1300
-+#define MY_NO_INLINE __declspec(noinline)
-+#else
-+#define MY_NO_INLINE
-+#endif
-+
-+#define MY_CDECL __cdecl
-+#define MY_FAST_CALL __fastcall
-+
-+#else
-+
-+#define MY_CDECL
-+#define MY_FAST_CALL
-+
-+#endif
-+
-+
-+/* The following interfaces use first parameter as pointer to structure */
-+
-+typedef struct
-+{
-+ SRes (*Read)(void *p, void *buf, size_t *size);
-+ /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
-+ (output(*size) < input(*size)) is allowed */
-+} ISeqInStream;
-+
-+/* it can return SZ_ERROR_INPUT_EOF */
-+SRes SeqInStream_Read(ISeqInStream *stream, void *buf, size_t size);
-+SRes SeqInStream_Read2(ISeqInStream *stream, void *buf, size_t size, SRes errorType);
-+SRes SeqInStream_ReadByte(ISeqInStream *stream, Byte *buf);
-+
-+typedef struct
-+{
-+ size_t (*Write)(void *p, const void *buf, size_t size);
-+ /* Returns: result - the number of actually written bytes.
-+ (result < size) means error */
-+} ISeqOutStream;
-+
-+typedef enum
-+{
-+ SZ_SEEK_SET = 0,
-+ SZ_SEEK_CUR = 1,
-+ SZ_SEEK_END = 2
-+} ESzSeek;
-+
-+typedef struct
-+{
-+ SRes (*Read)(void *p, void *buf, size_t *size); /* same as ISeqInStream::Read */
-+ SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
-+} ISeekInStream;
-+
-+typedef struct
-+{
-+ SRes (*Look)(void *p, void **buf, size_t *size);
-+ /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
-+ (output(*size) > input(*size)) is not allowed
-+ (output(*size) < input(*size)) is allowed */
-+ SRes (*Skip)(void *p, size_t offset);
-+ /* offset must be <= output(*size) of Look */
-+
-+ SRes (*Read)(void *p, void *buf, size_t *size);
-+ /* reads directly (without buffer). It's same as ISeqInStream::Read */
-+ SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
-+} ILookInStream;
-+
-+SRes LookInStream_LookRead(ILookInStream *stream, void *buf, size_t *size);
-+SRes LookInStream_SeekTo(ILookInStream *stream, UInt64 offset);
-+
-+/* reads via ILookInStream::Read */
-+SRes LookInStream_Read2(ILookInStream *stream, void *buf, size_t size, SRes errorType);
-+SRes LookInStream_Read(ILookInStream *stream, void *buf, size_t size);
-+
-+#define LookToRead_BUF_SIZE (1 << 14)
-+
-+typedef struct
-+{
-+ ILookInStream s;
-+ ISeekInStream *realStream;
-+ size_t pos;
-+ size_t size;
-+ Byte buf[LookToRead_BUF_SIZE];
-+} CLookToRead;
-+
-+void LookToRead_CreateVTable(CLookToRead *p, int lookahead);
-+void LookToRead_Init(CLookToRead *p);
-+
-+typedef struct
-+{
-+ ISeqInStream s;
-+ ILookInStream *realStream;
-+} CSecToLook;
-+
-+void SecToLook_CreateVTable(CSecToLook *p);
-+
-+typedef struct
-+{
-+ ISeqInStream s;
-+ ILookInStream *realStream;
-+} CSecToRead;
-+
-+void SecToRead_CreateVTable(CSecToRead *p);
-+
-+typedef struct
-+{
-+ SRes (*Progress)(void *p, UInt64 inSize, UInt64 outSize);
-+ /* Returns: result. (result != SZ_OK) means break.
-+ Value (UInt64)(Int64)-1 for size means unknown value. */
-+} ICompressProgress;
-+
-+typedef struct
-+{
-+ void *(*Alloc)(void *p, size_t size);
-+ void (*Free)(void *p, void *address); /* address can be 0 */
-+} ISzAlloc;
-+
-+#define IAlloc_Alloc(p, size) (p)->Alloc((p), size)
-+#define IAlloc_Free(p, a) (p)->Free((p), a)
-+
-+EXTERN_C_END
-+
-+#endif
---- a/lib/Kconfig
-+++ b/lib/Kconfig
-@@ -227,6 +227,12 @@ config LZ4_DECOMPRESS
-
- source "lib/xz/Kconfig"
-
-+config LZMA_COMPRESS
-+ tristate
-+
-+config LZMA_DECOMPRESS
-+ tristate
-+
- #
- # These all provide a common interface (hence the apparent duplication with
- # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
---- a/lib/Makefile
-+++ b/lib/Makefile
-@@ -2,6 +2,16 @@
- # Makefile for some libs needed in the kernel.
- #
-
-+ifdef CONFIG_JFFS2_ZLIB
-+ CONFIG_ZLIB_INFLATE:=y
-+ CONFIG_ZLIB_DEFLATE:=y
-+endif
-+
-+ifdef CONFIG_JFFS2_LZMA
-+ CONFIG_LZMA_DECOMPRESS:=y
-+ CONFIG_LZMA_COMPRESS:=y
-+endif
-+
- ifdef CONFIG_FUNCTION_TRACER
- ORIG_CFLAGS := $(KBUILD_CFLAGS)
- KBUILD_CFLAGS = $(subst -pg,,$(ORIG_CFLAGS))
-@@ -85,6 +95,8 @@ obj-$(CONFIG_LZ4HC_COMPRESS) += lz4/
- obj-$(CONFIG_LZ4_DECOMPRESS) += lz4/
- obj-$(CONFIG_XZ_DEC) += xz/
- obj-$(CONFIG_RAID6_PQ) += raid6/
-+obj-$(CONFIG_LZMA_COMPRESS) += lzma/
-+obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/
-
- lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
- lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
---- /dev/null
-+++ b/lib/lzma/LzFind.c
-@@ -0,0 +1,761 @@
-+/* LzFind.c -- Match finder for LZ algorithms
-+2009-04-22 : Igor Pavlov : Public domain */
-+
-+#include <string.h>
-+
-+#include "LzFind.h"
-+#include "LzHash.h"
-+
-+#define kEmptyHashValue 0
-+#define kMaxValForNormalize ((UInt32)0xFFFFFFFF)
-+#define kNormalizeStepMin (1 << 10) /* it must be power of 2 */
-+#define kNormalizeMask (~(kNormalizeStepMin - 1))
-+#define kMaxHistorySize ((UInt32)3 << 30)
-+
-+#define kStartMaxLen 3
-+
-+static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc)
-+{
-+ if (!p->directInput)
-+ {
-+ alloc->Free(alloc, p->bufferBase);
-+ p->bufferBase = 0;
-+ }
-+}
-+
-+/* keepSizeBefore + keepSizeAfter + keepSizeReserv must be < 4G) */
-+
-+static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc)
-+{
-+ UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv;
-+ if (p->directInput)
-+ {
-+ p->blockSize = blockSize;
-+ return 1;
-+ }
-+ if (p->bufferBase == 0 || p->blockSize != blockSize)
-+ {
-+ LzInWindow_Free(p, alloc);
-+ p->blockSize = blockSize;
-+ p->bufferBase = (Byte *)alloc->Alloc(alloc, (size_t)blockSize);
-+ }
-+ return (p->bufferBase != 0);
-+}
-+
-+Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
-+Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
-+
-+UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
-+
-+void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
-+{
-+ p->posLimit -= subValue;
-+ p->pos -= subValue;
-+ p->streamPos -= subValue;
-+}
-+
-+static void MatchFinder_ReadBlock(CMatchFinder *p)
-+{
-+ if (p->streamEndWasReached || p->result != SZ_OK)
-+ return;
-+ if (p->directInput)
-+ {
-+ UInt32 curSize = 0xFFFFFFFF - p->streamPos;
-+ if (curSize > p->directInputRem)
-+ curSize = (UInt32)p->directInputRem;
-+ p->directInputRem -= curSize;
-+ p->streamPos += curSize;
-+ if (p->directInputRem == 0)
-+ p->streamEndWasReached = 1;
-+ return;
-+ }
-+ for (;;)
-+ {
-+ Byte *dest = p->buffer + (p->streamPos - p->pos);
-+ size_t size = (p->bufferBase + p->blockSize - dest);
-+ if (size == 0)
-+ return;
-+ p->result = p->stream->Read(p->stream, dest, &size);
-+ if (p->result != SZ_OK)
-+ return;
-+ if (size == 0)
-+ {
-+ p->streamEndWasReached = 1;
-+ return;
-+ }
-+ p->streamPos += (UInt32)size;
-+ if (p->streamPos - p->pos > p->keepSizeAfter)
-+ return;
-+ }
-+}
-+
-+void MatchFinder_MoveBlock(CMatchFinder *p)
-+{
-+ memmove(p->bufferBase,
-+ p->buffer - p->keepSizeBefore,
-+ (size_t)(p->streamPos - p->pos + p->keepSizeBefore));
-+ p->buffer = p->bufferBase + p->keepSizeBefore;
-+}
-+
-+int MatchFinder_NeedMove(CMatchFinder *p)
-+{
-+ if (p->directInput)
-+ return 0;
-+ /* if (p->streamEndWasReached) return 0; */
-+ return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter);
-+}
-+
-+void MatchFinder_ReadIfRequired(CMatchFinder *p)
-+{
-+ if (p->streamEndWasReached)
-+ return;
-+ if (p->keepSizeAfter >= p->streamPos - p->pos)
-+ MatchFinder_ReadBlock(p);
-+}
-+
-+static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p)
-+{
-+ if (MatchFinder_NeedMove(p))
-+ MatchFinder_MoveBlock(p);
-+ MatchFinder_ReadBlock(p);
-+}
-+
-+static void MatchFinder_SetDefaultSettings(CMatchFinder *p)
-+{
-+ p->cutValue = 32;
-+ p->btMode = 1;
-+ p->numHashBytes = 4;
-+ p->bigHash = 0;
-+}
-+
-+#define kCrcPoly 0xEDB88320
-+
-+void MatchFinder_Construct(CMatchFinder *p)
-+{
-+ UInt32 i;
-+ p->bufferBase = 0;
-+ p->directInput = 0;
-+ p->hash = 0;
-+ MatchFinder_SetDefaultSettings(p);
-+
-+ for (i = 0; i < 256; i++)
-+ {
-+ UInt32 r = i;
-+ int j;
-+ for (j = 0; j < 8; j++)
-+ r = (r >> 1) ^ (kCrcPoly & ~((r & 1) - 1));
-+ p->crc[i] = r;
-+ }
-+}
-+
-+static void MatchFinder_FreeThisClassMemory(CMatchFinder *p, ISzAlloc *alloc)
-+{
-+ alloc->Free(alloc, p->hash);
-+ p->hash = 0;
-+}
-+
-+void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc)
-+{
-+ MatchFinder_FreeThisClassMemory(p, alloc);
-+ LzInWindow_Free(p, alloc);
-+}
-+
-+static CLzRef* AllocRefs(UInt32 num, ISzAlloc *alloc)
-+{
-+ size_t sizeInBytes = (size_t)num * sizeof(CLzRef);
-+ if (sizeInBytes / sizeof(CLzRef) != num)
-+ return 0;
-+ return (CLzRef *)alloc->Alloc(alloc, sizeInBytes);
-+}
-+
-+int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
-+ UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
-+ ISzAlloc *alloc)
-+{
-+ UInt32 sizeReserv;
-+ if (historySize > kMaxHistorySize)
-+ {
-+ MatchFinder_Free(p, alloc);
-+ return 0;
-+ }
-+ sizeReserv = historySize >> 1;
-+ if (historySize > ((UInt32)2 << 30))
-+ sizeReserv = historySize >> 2;
-+ sizeReserv += (keepAddBufferBefore + matchMaxLen + keepAddBufferAfter) / 2 + (1 << 19);
-+
-+ p->keepSizeBefore = historySize + keepAddBufferBefore + 1;
-+ p->keepSizeAfter = matchMaxLen + keepAddBufferAfter;
-+ /* we need one additional byte, since we use MoveBlock after pos++ and before dictionary using */
-+ if (LzInWindow_Create(p, sizeReserv, alloc))
-+ {
-+ UInt32 newCyclicBufferSize = historySize + 1;
-+ UInt32 hs;
-+ p->matchMaxLen = matchMaxLen;
-+ {
-+ p->fixedHashSize = 0;
-+ if (p->numHashBytes == 2)
-+ hs = (1 << 16) - 1;
-+ else
-+ {
-+ hs = historySize - 1;
-+ hs |= (hs >> 1);
-+ hs |= (hs >> 2);
-+ hs |= (hs >> 4);
-+ hs |= (hs >> 8);
-+ hs >>= 1;
-+ hs |= 0xFFFF; /* don't change it! It's required for Deflate */
-+ if (hs > (1 << 24))
-+ {
-+ if (p->numHashBytes == 3)
-+ hs = (1 << 24) - 1;
-+ else
-+ hs >>= 1;
-+ }
-+ }
-+ p->hashMask = hs;
-+ hs++;
-+ if (p->numHashBytes > 2) p->fixedHashSize += kHash2Size;
-+ if (p->numHashBytes > 3) p->fixedHashSize += kHash3Size;
-+ if (p->numHashBytes > 4) p->fixedHashSize += kHash4Size;
-+ hs += p->fixedHashSize;
-+ }
-+
-+ {
-+ UInt32 prevSize = p->hashSizeSum + p->numSons;
-+ UInt32 newSize;
-+ p->historySize = historySize;
-+ p->hashSizeSum = hs;
-+ p->cyclicBufferSize = newCyclicBufferSize;
-+ p->numSons = (p->btMode ? newCyclicBufferSize * 2 : newCyclicBufferSize);
-+ newSize = p->hashSizeSum + p->numSons;
-+ if (p->hash != 0 && prevSize == newSize)
-+ return 1;
-+ MatchFinder_FreeThisClassMemory(p, alloc);
-+ p->hash = AllocRefs(newSize, alloc);
-+ if (p->hash != 0)
-+ {
-+ p->son = p->hash + p->hashSizeSum;
-+ return 1;
-+ }
-+ }
-+ }
-+ MatchFinder_Free(p, alloc);
-+ return 0;
-+}
-+
-+static void MatchFinder_SetLimits(CMatchFinder *p)
-+{
-+ UInt32 limit = kMaxValForNormalize - p->pos;
-+ UInt32 limit2 = p->cyclicBufferSize - p->cyclicBufferPos;
-+ if (limit2 < limit)
-+ limit = limit2;
-+ limit2 = p->streamPos - p->pos;
-+ if (limit2 <= p->keepSizeAfter)
-+ {
-+ if (limit2 > 0)
-+ limit2 = 1;
-+ }
-+ else
-+ limit2 -= p->keepSizeAfter;
-+ if (limit2 < limit)
-+ limit = limit2;
-+ {
-+ UInt32 lenLimit = p->streamPos - p->pos;
-+ if (lenLimit > p->matchMaxLen)
-+ lenLimit = p->matchMaxLen;
-+ p->lenLimit = lenLimit;
-+ }
-+ p->posLimit = p->pos + limit;
-+}
-+
-+void MatchFinder_Init(CMatchFinder *p)
-+{
-+ UInt32 i;
-+ for (i = 0; i < p->hashSizeSum; i++)
-+ p->hash[i] = kEmptyHashValue;
-+ p->cyclicBufferPos = 0;
-+ p->buffer = p->bufferBase;
-+ p->pos = p->streamPos = p->cyclicBufferSize;
-+ p->result = SZ_OK;
-+ p->streamEndWasReached = 0;
-+ MatchFinder_ReadBlock(p);
-+ MatchFinder_SetLimits(p);
-+}
-+
-+static UInt32 MatchFinder_GetSubValue(CMatchFinder *p)
-+{
-+ return (p->pos - p->historySize - 1) & kNormalizeMask;
-+}
-+
-+void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
-+{
-+ UInt32 i;
-+ for (i = 0; i < numItems; i++)
-+ {
-+ UInt32 value = items[i];
-+ if (value <= subValue)
-+ value = kEmptyHashValue;
-+ else
-+ value -= subValue;
-+ items[i] = value;
-+ }
-+}
-+
-+static void MatchFinder_Normalize(CMatchFinder *p)
-+{
-+ UInt32 subValue = MatchFinder_GetSubValue(p);
-+ MatchFinder_Normalize3(subValue, p->hash, p->hashSizeSum + p->numSons);
-+ MatchFinder_ReduceOffsets(p, subValue);
-+}
-+
-+static void MatchFinder_CheckLimits(CMatchFinder *p)
-+{
-+ if (p->pos == kMaxValForNormalize)
-+ MatchFinder_Normalize(p);
-+ if (!p->streamEndWasReached && p->keepSizeAfter == p->streamPos - p->pos)
-+ MatchFinder_CheckAndMoveAndRead(p);
-+ if (p->cyclicBufferPos == p->cyclicBufferSize)
-+ p->cyclicBufferPos = 0;
-+ MatchFinder_SetLimits(p);
-+}
-+
-+static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
-+ UInt32 *distances, UInt32 maxLen)
-+{
-+ son[_cyclicBufferPos] = curMatch;
-+ for (;;)
-+ {
-+ UInt32 delta = pos - curMatch;
-+ if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-+ return distances;
-+ {
-+ const Byte *pb = cur - delta;
-+ curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)];
-+ if (pb[maxLen] == cur[maxLen] && *pb == *cur)
-+ {
-+ UInt32 len = 0;
-+ while (++len != lenLimit)
-+ if (pb[len] != cur[len])
-+ break;
-+ if (maxLen < len)
-+ {
-+ *distances++ = maxLen = len;
-+ *distances++ = delta - 1;
-+ if (len == lenLimit)
-+ return distances;
-+ }
-+ }
-+ }
-+ }
-+}
-+
-+UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
-+ UInt32 *distances, UInt32 maxLen)
-+{
-+ CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
-+ CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
-+ UInt32 len0 = 0, len1 = 0;
-+ for (;;)
-+ {
-+ UInt32 delta = pos - curMatch;
-+ if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-+ {
-+ *ptr0 = *ptr1 = kEmptyHashValue;
-+ return distances;
-+ }
-+ {
-+ CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
-+ const Byte *pb = cur - delta;
-+ UInt32 len = (len0 < len1 ? len0 : len1);
-+ if (pb[len] == cur[len])
-+ {
-+ if (++len != lenLimit && pb[len] == cur[len])
-+ while (++len != lenLimit)
-+ if (pb[len] != cur[len])
-+ break;
-+ if (maxLen < len)
-+ {
-+ *distances++ = maxLen = len;
-+ *distances++ = delta - 1;
-+ if (len == lenLimit)
-+ {
-+ *ptr1 = pair[0];
-+ *ptr0 = pair[1];
-+ return distances;
-+ }
-+ }
-+ }
-+ if (pb[len] < cur[len])
-+ {
-+ *ptr1 = curMatch;
-+ ptr1 = pair + 1;
-+ curMatch = *ptr1;
-+ len1 = len;
-+ }
-+ else
-+ {
-+ *ptr0 = curMatch;
-+ ptr0 = pair;
-+ curMatch = *ptr0;
-+ len0 = len;
-+ }
-+ }
-+ }
-+}
-+
-+static void SkipMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue)
-+{
-+ CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
-+ CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
-+ UInt32 len0 = 0, len1 = 0;
-+ for (;;)
-+ {
-+ UInt32 delta = pos - curMatch;
-+ if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-+ {
-+ *ptr0 = *ptr1 = kEmptyHashValue;
-+ return;
-+ }
-+ {
-+ CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
-+ const Byte *pb = cur - delta;
-+ UInt32 len = (len0 < len1 ? len0 : len1);
-+ if (pb[len] == cur[len])
-+ {
-+ while (++len != lenLimit)
-+ if (pb[len] != cur[len])
-+ break;
-+ {
-+ if (len == lenLimit)
-+ {
-+ *ptr1 = pair[0];
-+ *ptr0 = pair[1];
-+ return;
-+ }
-+ }
-+ }
-+ if (pb[len] < cur[len])
-+ {
-+ *ptr1 = curMatch;
-+ ptr1 = pair + 1;
-+ curMatch = *ptr1;
-+ len1 = len;
-+ }
-+ else
-+ {
-+ *ptr0 = curMatch;
-+ ptr0 = pair;
-+ curMatch = *ptr0;
-+ len0 = len;
-+ }
-+ }
-+ }
-+}
-+
-+#define MOVE_POS \
-+ ++p->cyclicBufferPos; \
-+ p->buffer++; \
-+ if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p);
-+
-+#define MOVE_POS_RET MOVE_POS return offset;
-+
-+static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; }
-+
-+#define GET_MATCHES_HEADER2(minLen, ret_op) \
-+ UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \
-+ lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \
-+ cur = p->buffer;
-+
-+#define GET_MATCHES_HEADER(minLen) GET_MATCHES_HEADER2(minLen, return 0)
-+#define SKIP_HEADER(minLen) GET_MATCHES_HEADER2(minLen, continue)
-+
-+#define MF_PARAMS(p) p->pos, p->buffer, p->son, p->cyclicBufferPos, p->cyclicBufferSize, p->cutValue
-+
-+#define GET_MATCHES_FOOTER(offset, maxLen) \
-+ offset = (UInt32)(GetMatchesSpec1(lenLimit, curMatch, MF_PARAMS(p), \
-+ distances + offset, maxLen) - distances); MOVE_POS_RET;
-+
-+#define SKIP_FOOTER \
-+ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS;
-+
-+static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+ UInt32 offset;
-+ GET_MATCHES_HEADER(2)
-+ HASH2_CALC;
-+ curMatch = p->hash[hashValue];
-+ p->hash[hashValue] = p->pos;
-+ offset = 0;
-+ GET_MATCHES_FOOTER(offset, 1)
-+}
-+
-+UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+ UInt32 offset;
-+ GET_MATCHES_HEADER(3)
-+ HASH_ZIP_CALC;
-+ curMatch = p->hash[hashValue];
-+ p->hash[hashValue] = p->pos;
-+ offset = 0;
-+ GET_MATCHES_FOOTER(offset, 2)
-+}
-+
-+static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+ UInt32 hash2Value, delta2, maxLen, offset;
-+ GET_MATCHES_HEADER(3)
-+
-+ HASH3_CALC;
-+
-+ delta2 = p->pos - p->hash[hash2Value];
-+ curMatch = p->hash[kFix3HashSize + hashValue];
-+
-+ p->hash[hash2Value] =
-+ p->hash[kFix3HashSize + hashValue] = p->pos;
-+
-+
-+ maxLen = 2;
-+ offset = 0;
-+ if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-+ {
-+ for (; maxLen != lenLimit; maxLen++)
-+ if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-+ break;
-+ distances[0] = maxLen;
-+ distances[1] = delta2 - 1;
-+ offset = 2;
-+ if (maxLen == lenLimit)
-+ {
-+ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
-+ MOVE_POS_RET;
-+ }
-+ }
-+ GET_MATCHES_FOOTER(offset, maxLen)
-+}
-+
-+static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+ UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
-+ GET_MATCHES_HEADER(4)
-+
-+ HASH4_CALC;
-+
-+ delta2 = p->pos - p->hash[ hash2Value];
-+ delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
-+ curMatch = p->hash[kFix4HashSize + hashValue];
-+
-+ p->hash[ hash2Value] =
-+ p->hash[kFix3HashSize + hash3Value] =
-+ p->hash[kFix4HashSize + hashValue] = p->pos;
-+
-+ maxLen = 1;
-+ offset = 0;
-+ if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-+ {
-+ distances[0] = maxLen = 2;
-+ distances[1] = delta2 - 1;
-+ offset = 2;
-+ }
-+ if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
-+ {
-+ maxLen = 3;
-+ distances[offset + 1] = delta3 - 1;
-+ offset += 2;
-+ delta2 = delta3;
-+ }
-+ if (offset != 0)
-+ {
-+ for (; maxLen != lenLimit; maxLen++)
-+ if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-+ break;
-+ distances[offset - 2] = maxLen;
-+ if (maxLen == lenLimit)
-+ {
-+ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
-+ MOVE_POS_RET;
-+ }
-+ }
-+ if (maxLen < 3)
-+ maxLen = 3;
-+ GET_MATCHES_FOOTER(offset, maxLen)
-+}
-+
-+static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+ UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
-+ GET_MATCHES_HEADER(4)
-+
-+ HASH4_CALC;
-+
-+ delta2 = p->pos - p->hash[ hash2Value];
-+ delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
-+ curMatch = p->hash[kFix4HashSize + hashValue];
-+
-+ p->hash[ hash2Value] =
-+ p->hash[kFix3HashSize + hash3Value] =
-+ p->hash[kFix4HashSize + hashValue] = p->pos;
-+
-+ maxLen = 1;
-+ offset = 0;
-+ if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-+ {
-+ distances[0] = maxLen = 2;
-+ distances[1] = delta2 - 1;
-+ offset = 2;
-+ }
-+ if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
-+ {
-+ maxLen = 3;
-+ distances[offset + 1] = delta3 - 1;
-+ offset += 2;
-+ delta2 = delta3;
-+ }
-+ if (offset != 0)
-+ {
-+ for (; maxLen != lenLimit; maxLen++)
-+ if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-+ break;
-+ distances[offset - 2] = maxLen;
-+ if (maxLen == lenLimit)
-+ {
-+ p->son[p->cyclicBufferPos] = curMatch;
-+ MOVE_POS_RET;
-+ }
-+ }
-+ if (maxLen < 3)
-+ maxLen = 3;
-+ offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
-+ distances + offset, maxLen) - (distances));
-+ MOVE_POS_RET
-+}
-+
-+UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+ UInt32 offset;
-+ GET_MATCHES_HEADER(3)
-+ HASH_ZIP_CALC;
-+ curMatch = p->hash[hashValue];
-+ p->hash[hashValue] = p->pos;
-+ offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
-+ distances, 2) - (distances));
-+ MOVE_POS_RET
-+}
-+
-+static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+ do
-+ {
-+ SKIP_HEADER(2)
-+ HASH2_CALC;
-+ curMatch = p->hash[hashValue];
-+ p->hash[hashValue] = p->pos;
-+ SKIP_FOOTER
-+ }
-+ while (--num != 0);
-+}
-+
-+void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+ do
-+ {
-+ SKIP_HEADER(3)
-+ HASH_ZIP_CALC;
-+ curMatch = p->hash[hashValue];
-+ p->hash[hashValue] = p->pos;
-+ SKIP_FOOTER
-+ }
-+ while (--num != 0);
-+}
-+
-+static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+ do
-+ {
-+ UInt32 hash2Value;
-+ SKIP_HEADER(3)
-+ HASH3_CALC;
-+ curMatch = p->hash[kFix3HashSize + hashValue];
-+ p->hash[hash2Value] =
-+ p->hash[kFix3HashSize + hashValue] = p->pos;
-+ SKIP_FOOTER
-+ }
-+ while (--num != 0);
-+}
-+
-+static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+ do
-+ {
-+ UInt32 hash2Value, hash3Value;
-+ SKIP_HEADER(4)
-+ HASH4_CALC;
-+ curMatch = p->hash[kFix4HashSize + hashValue];
-+ p->hash[ hash2Value] =
-+ p->hash[kFix3HashSize + hash3Value] = p->pos;
-+ p->hash[kFix4HashSize + hashValue] = p->pos;
-+ SKIP_FOOTER
-+ }
-+ while (--num != 0);
-+}
-+
-+static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+ do
-+ {
-+ UInt32 hash2Value, hash3Value;
-+ SKIP_HEADER(4)
-+ HASH4_CALC;
-+ curMatch = p->hash[kFix4HashSize + hashValue];
-+ p->hash[ hash2Value] =
-+ p->hash[kFix3HashSize + hash3Value] =
-+ p->hash[kFix4HashSize + hashValue] = p->pos;
-+ p->son[p->cyclicBufferPos] = curMatch;
-+ MOVE_POS
-+ }
-+ while (--num != 0);
-+}
-+
-+void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+ do
-+ {
-+ SKIP_HEADER(3)
-+ HASH_ZIP_CALC;
-+ curMatch = p->hash[hashValue];
-+ p->hash[hashValue] = p->pos;
-+ p->son[p->cyclicBufferPos] = curMatch;
-+ MOVE_POS
-+ }
-+ while (--num != 0);
-+}
-+
-+void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable)
-+{
-+ vTable->Init = (Mf_Init_Func)MatchFinder_Init;
-+ vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte;
-+ vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes;
-+ vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos;
-+ if (!p->btMode)
-+ {
-+ vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches;
-+ vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip;
-+ }
-+ else if (p->numHashBytes == 2)
-+ {
-+ vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches;
-+ vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip;
-+ }
-+ else if (p->numHashBytes == 3)
-+ {
-+ vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches;
-+ vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip;
-+ }
-+ else
-+ {
-+ vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
-+ vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
-+ }
-+}
---- /dev/null
-+++ b/lib/lzma/LzmaDec.c
-@@ -0,0 +1,999 @@
-+/* LzmaDec.c -- LZMA Decoder
-+2009-09-20 : Igor Pavlov : Public domain */
-+
-+#include "LzmaDec.h"
-+
-+#include <string.h>
-+
-+#define kNumTopBits 24
-+#define kTopValue ((UInt32)1 << kNumTopBits)
-+
-+#define kNumBitModelTotalBits 11
-+#define kBitModelTotal (1 << kNumBitModelTotalBits)
-+#define kNumMoveBits 5
-+
-+#define RC_INIT_SIZE 5
-+
-+#define NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | (*buf++); }
-+
-+#define IF_BIT_0(p) ttt = *(p); NORMALIZE; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
-+#define UPDATE_0(p) range = bound; *(p) = (CLzmaProb)(ttt + ((kBitModelTotal - ttt) >> kNumMoveBits));
-+#define UPDATE_1(p) range -= bound; code -= bound; *(p) = (CLzmaProb)(ttt - (ttt >> kNumMoveBits));
-+#define GET_BIT2(p, i, A0, A1) IF_BIT_0(p) \
-+ { UPDATE_0(p); i = (i + i); A0; } else \
-+ { UPDATE_1(p); i = (i + i) + 1; A1; }
-+#define GET_BIT(p, i) GET_BIT2(p, i, ; , ;)
-+
-+#define TREE_GET_BIT(probs, i) { GET_BIT((probs + i), i); }
-+#define TREE_DECODE(probs, limit, i) \
-+ { i = 1; do { TREE_GET_BIT(probs, i); } while (i < limit); i -= limit; }
-+
-+/* #define _LZMA_SIZE_OPT */
-+
-+#ifdef _LZMA_SIZE_OPT
-+#define TREE_6_DECODE(probs, i) TREE_DECODE(probs, (1 << 6), i)
-+#else
-+#define TREE_6_DECODE(probs, i) \
-+ { i = 1; \
-+ TREE_GET_BIT(probs, i); \
-+ TREE_GET_BIT(probs, i); \
-+ TREE_GET_BIT(probs, i); \
-+ TREE_GET_BIT(probs, i); \
-+ TREE_GET_BIT(probs, i); \
-+ TREE_GET_BIT(probs, i); \
-+ i -= 0x40; }
-+#endif
-+
-+#define NORMALIZE_CHECK if (range < kTopValue) { if (buf >= bufLimit) return DUMMY_ERROR; range <<= 8; code = (code << 8) | (*buf++); }
-+
-+#define IF_BIT_0_CHECK(p) ttt = *(p); NORMALIZE_CHECK; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
-+#define UPDATE_0_CHECK range = bound;
-+#define UPDATE_1_CHECK range -= bound; code -= bound;
-+#define GET_BIT2_CHECK(p, i, A0, A1) IF_BIT_0_CHECK(p) \
-+ { UPDATE_0_CHECK; i = (i + i); A0; } else \
-+ { UPDATE_1_CHECK; i = (i + i) + 1; A1; }
-+#define GET_BIT_CHECK(p, i) GET_BIT2_CHECK(p, i, ; , ;)
-+#define TREE_DECODE_CHECK(probs, limit, i) \
-+ { i = 1; do { GET_BIT_CHECK(probs + i, i) } while (i < limit); i -= limit; }
-+
-+
-+#define kNumPosBitsMax 4
-+#define kNumPosStatesMax (1 << kNumPosBitsMax)
-+
-+#define kLenNumLowBits 3
-+#define kLenNumLowSymbols (1 << kLenNumLowBits)
-+#define kLenNumMidBits 3
-+#define kLenNumMidSymbols (1 << kLenNumMidBits)
-+#define kLenNumHighBits 8
-+#define kLenNumHighSymbols (1 << kLenNumHighBits)
-+
-+#define LenChoice 0
-+#define LenChoice2 (LenChoice + 1)
-+#define LenLow (LenChoice2 + 1)
-+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
-+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
-+#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
-+
-+
-+#define kNumStates 12
-+#define kNumLitStates 7
-+
-+#define kStartPosModelIndex 4
-+#define kEndPosModelIndex 14
-+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-+
-+#define kNumPosSlotBits 6
-+#define kNumLenToPosStates 4
-+
-+#define kNumAlignBits 4
-+#define kAlignTableSize (1 << kNumAlignBits)
-+
-+#define kMatchMinLen 2
-+#define kMatchSpecLenStart (kMatchMinLen + kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
-+
-+#define IsMatch 0
-+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
-+#define IsRepG0 (IsRep + kNumStates)
-+#define IsRepG1 (IsRepG0 + kNumStates)
-+#define IsRepG2 (IsRepG1 + kNumStates)
-+#define IsRep0Long (IsRepG2 + kNumStates)
-+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
-+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
-+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
-+#define LenCoder (Align + kAlignTableSize)
-+#define RepLenCoder (LenCoder + kNumLenProbs)
-+#define Literal (RepLenCoder + kNumLenProbs)
-+
-+#define LZMA_BASE_SIZE 1846
-+#define LZMA_LIT_SIZE 768
-+
-+#define LzmaProps_GetNumProbs(p) ((UInt32)LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((p)->lc + (p)->lp)))
-+
-+#if Literal != LZMA_BASE_SIZE
-+StopCompilingDueBUG
-+#endif
-+
-+#define LZMA_DIC_MIN (1 << 12)
-+
-+/* First LZMA-symbol is always decoded.
-+And it decodes new LZMA-symbols while (buf < bufLimit), but "buf" is without last normalization
-+Out:
-+ Result:
-+ SZ_OK - OK
-+ SZ_ERROR_DATA - Error
-+ p->remainLen:
-+ < kMatchSpecLenStart : normal remain
-+ = kMatchSpecLenStart : finished
-+ = kMatchSpecLenStart + 1 : Flush marker
-+ = kMatchSpecLenStart + 2 : State Init Marker
-+*/
-+
-+static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
-+{
-+ CLzmaProb *probs = p->probs;
-+
-+ unsigned state = p->state;
-+ UInt32 rep0 = p->reps[0], rep1 = p->reps[1], rep2 = p->reps[2], rep3 = p->reps[3];
-+ unsigned pbMask = ((unsigned)1 << (p->prop.pb)) - 1;
-+ unsigned lpMask = ((unsigned)1 << (p->prop.lp)) - 1;
-+ unsigned lc = p->prop.lc;
-+
-+ Byte *dic = p->dic;
-+ SizeT dicBufSize = p->dicBufSize;
-+ SizeT dicPos = p->dicPos;
-+
-+ UInt32 processedPos = p->processedPos;
-+ UInt32 checkDicSize = p->checkDicSize;
-+ unsigned len = 0;
-+
-+ const Byte *buf = p->buf;
-+ UInt32 range = p->range;
-+ UInt32 code = p->code;
-+
-+ do
-+ {
-+ CLzmaProb *prob;
-+ UInt32 bound;
-+ unsigned ttt;
-+ unsigned posState = processedPos & pbMask;
-+
-+ prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
-+ IF_BIT_0(prob)
-+ {
-+ unsigned symbol;
-+ UPDATE_0(prob);
-+ prob = probs + Literal;
-+ if (checkDicSize != 0 || processedPos != 0)
-+ prob += (LZMA_LIT_SIZE * (((processedPos & lpMask) << lc) +
-+ (dic[(dicPos == 0 ? dicBufSize : dicPos) - 1] >> (8 - lc))));
-+
-+ if (state < kNumLitStates)
-+ {
-+ state -= (state < 4) ? state : 3;
-+ symbol = 1;
-+ do { GET_BIT(prob + symbol, symbol) } while (symbol < 0x100);
-+ }
-+ else
-+ {
-+ unsigned matchByte = p->dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
-+ unsigned offs = 0x100;
-+ state -= (state < 10) ? 3 : 6;
-+ symbol = 1;
-+ do
-+ {
-+ unsigned bit;
-+ CLzmaProb *probLit;
-+ matchByte <<= 1;
-+ bit = (matchByte & offs);
-+ probLit = prob + offs + bit + symbol;
-+ GET_BIT2(probLit, symbol, offs &= ~bit, offs &= bit)
-+ }
-+ while (symbol < 0x100);
-+ }
-+ dic[dicPos++] = (Byte)symbol;
-+ processedPos++;
-+ continue;
-+ }
-+ else
-+ {
-+ UPDATE_1(prob);
-+ prob = probs + IsRep + state;
-+ IF_BIT_0(prob)
-+ {
-+ UPDATE_0(prob);
-+ state += kNumStates;
-+ prob = probs + LenCoder;
-+ }
-+ else
-+ {
-+ UPDATE_1(prob);
-+ if (checkDicSize == 0 && processedPos == 0)
-+ return SZ_ERROR_DATA;
-+ prob = probs + IsRepG0 + state;
-+ IF_BIT_0(prob)
-+ {
-+ UPDATE_0(prob);
-+ prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
-+ IF_BIT_0(prob)
-+ {
-+ UPDATE_0(prob);
-+ dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
-+ dicPos++;
-+ processedPos++;
-+ state = state < kNumLitStates ? 9 : 11;
-+ continue;
-+ }
-+ UPDATE_1(prob);
-+ }
-+ else
-+ {
-+ UInt32 distance;
-+ UPDATE_1(prob);
-+ prob = probs + IsRepG1 + state;
-+ IF_BIT_0(prob)
-+ {
-+ UPDATE_0(prob);
-+ distance = rep1;
-+ }
-+ else
-+ {
-+ UPDATE_1(prob);
-+ prob = probs + IsRepG2 + state;
-+ IF_BIT_0(prob)
-+ {
-+ UPDATE_0(prob);
-+ distance = rep2;
-+ }
-+ else
-+ {
-+ UPDATE_1(prob);
-+ distance = rep3;
-+ rep3 = rep2;
-+ }
-+ rep2 = rep1;
-+ }
-+ rep1 = rep0;
-+ rep0 = distance;
-+ }
-+ state = state < kNumLitStates ? 8 : 11;
-+ prob = probs + RepLenCoder;
-+ }
-+ {
-+ unsigned limit, offset;
-+ CLzmaProb *probLen = prob + LenChoice;
-+ IF_BIT_0(probLen)
-+ {
-+ UPDATE_0(probLen);
-+ probLen = prob + LenLow + (posState << kLenNumLowBits);
-+ offset = 0;
-+ limit = (1 << kLenNumLowBits);
-+ }
-+ else
-+ {
-+ UPDATE_1(probLen);
-+ probLen = prob + LenChoice2;
-+ IF_BIT_0(probLen)
-+ {
-+ UPDATE_0(probLen);
-+ probLen = prob + LenMid + (posState << kLenNumMidBits);
-+ offset = kLenNumLowSymbols;
-+ limit = (1 << kLenNumMidBits);
-+ }
-+ else
-+ {
-+ UPDATE_1(probLen);
-+ probLen = prob + LenHigh;
-+ offset = kLenNumLowSymbols + kLenNumMidSymbols;
-+ limit = (1 << kLenNumHighBits);
-+ }
-+ }
-+ TREE_DECODE(probLen, limit, len);
-+ len += offset;
-+ }
-+
-+ if (state >= kNumStates)
-+ {
-+ UInt32 distance;
-+ prob = probs + PosSlot +
-+ ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << kNumPosSlotBits);
-+ TREE_6_DECODE(prob, distance);
-+ if (distance >= kStartPosModelIndex)
-+ {
-+ unsigned posSlot = (unsigned)distance;
-+ int numDirectBits = (int)(((distance >> 1) - 1));
-+ distance = (2 | (distance & 1));
-+ if (posSlot < kEndPosModelIndex)
-+ {
-+ distance <<= numDirectBits;
-+ prob = probs + SpecPos + distance - posSlot - 1;
-+ {
-+ UInt32 mask = 1;
-+ unsigned i = 1;
-+ do
-+ {
-+ GET_BIT2(prob + i, i, ; , distance |= mask);
-+ mask <<= 1;
-+ }
-+ while (--numDirectBits != 0);
-+ }
-+ }
-+ else
-+ {
-+ numDirectBits -= kNumAlignBits;
-+ do
-+ {
-+ NORMALIZE
-+ range >>= 1;
-+
-+ {
-+ UInt32 t;
-+ code -= range;
-+ t = (0 - ((UInt32)code >> 31)); /* (UInt32)((Int32)code >> 31) */
-+ distance = (distance << 1) + (t + 1);
-+ code += range & t;
-+ }
-+ /*
-+ distance <<= 1;
-+ if (code >= range)
-+ {
-+ code -= range;
-+ distance |= 1;
-+ }
-+ */
-+ }
-+ while (--numDirectBits != 0);
-+ prob = probs + Align;
-+ distance <<= kNumAlignBits;
-+ {
-+ unsigned i = 1;
-+ GET_BIT2(prob + i, i, ; , distance |= 1);
-+ GET_BIT2(prob + i, i, ; , distance |= 2);
-+ GET_BIT2(prob + i, i, ; , distance |= 4);
-+ GET_BIT2(prob + i, i, ; , distance |= 8);
-+ }
-+ if (distance == (UInt32)0xFFFFFFFF)
-+ {
-+ len += kMatchSpecLenStart;
-+ state -= kNumStates;
-+ break;
-+ }
-+ }
-+ }
-+ rep3 = rep2;
-+ rep2 = rep1;
-+ rep1 = rep0;
-+ rep0 = distance + 1;
-+ if (checkDicSize == 0)
-+ {
-+ if (distance >= processedPos)
-+ return SZ_ERROR_DATA;
-+ }
-+ else if (distance >= checkDicSize)
-+ return SZ_ERROR_DATA;
-+ state = (state < kNumStates + kNumLitStates) ? kNumLitStates : kNumLitStates + 3;
-+ }
-+
-+ len += kMatchMinLen;
-+
-+ if (limit == dicPos)
-+ return SZ_ERROR_DATA;
-+ {
-+ SizeT rem = limit - dicPos;
-+ unsigned curLen = ((rem < len) ? (unsigned)rem : len);
-+ SizeT pos = (dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0);
-+
-+ processedPos += curLen;
-+
-+ len -= curLen;
-+ if (pos + curLen <= dicBufSize)
-+ {
-+ Byte *dest = dic + dicPos;
-+ ptrdiff_t src = (ptrdiff_t)pos - (ptrdiff_t)dicPos;
-+ const Byte *lim = dest + curLen;
-+ dicPos += curLen;
-+ do
-+ *(dest) = (Byte)*(dest + src);
-+ while (++dest != lim);
-+ }
-+ else
-+ {
-+ do
-+ {
-+ dic[dicPos++] = dic[pos];
-+ if (++pos == dicBufSize)
-+ pos = 0;
-+ }
-+ while (--curLen != 0);
-+ }
-+ }
-+ }
-+ }
-+ while (dicPos < limit && buf < bufLimit);
-+ NORMALIZE;
-+ p->buf = buf;
-+ p->range = range;
-+ p->code = code;
-+ p->remainLen = len;
-+ p->dicPos = dicPos;
-+ p->processedPos = processedPos;
-+ p->reps[0] = rep0;
-+ p->reps[1] = rep1;
-+ p->reps[2] = rep2;
-+ p->reps[3] = rep3;
-+ p->state = state;
-+
-+ return SZ_OK;
-+}
-+
-+static void MY_FAST_CALL LzmaDec_WriteRem(CLzmaDec *p, SizeT limit)
-+{
-+ if (p->remainLen != 0 && p->remainLen < kMatchSpecLenStart)
-+ {
-+ Byte *dic = p->dic;
-+ SizeT dicPos = p->dicPos;
-+ SizeT dicBufSize = p->dicBufSize;
-+ unsigned len = p->remainLen;
-+ UInt32 rep0 = p->reps[0];
-+ if (limit - dicPos < len)
-+ len = (unsigned)(limit - dicPos);
-+
-+ if (p->checkDicSize == 0 && p->prop.dicSize - p->processedPos <= len)
-+ p->checkDicSize = p->prop.dicSize;
-+
-+ p->processedPos += len;
-+ p->remainLen -= len;
-+ while (len-- != 0)
-+ {
-+ dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
-+ dicPos++;
-+ }
-+ p->dicPos = dicPos;
-+ }
-+}
-+
-+static int MY_FAST_CALL LzmaDec_DecodeReal2(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
-+{
-+ do
-+ {
-+ SizeT limit2 = limit;
-+ if (p->checkDicSize == 0)
-+ {
-+ UInt32 rem = p->prop.dicSize - p->processedPos;
-+ if (limit - p->dicPos > rem)
-+ limit2 = p->dicPos + rem;
-+ }
-+ RINOK(LzmaDec_DecodeReal(p, limit2, bufLimit));
-+ if (p->processedPos >= p->prop.dicSize)
-+ p->checkDicSize = p->prop.dicSize;
-+ LzmaDec_WriteRem(p, limit);
-+ }
-+ while (p->dicPos < limit && p->buf < bufLimit && p->remainLen < kMatchSpecLenStart);
-+
-+ if (p->remainLen > kMatchSpecLenStart)
-+ {
-+ p->remainLen = kMatchSpecLenStart;
-+ }
-+ return 0;
-+}
-+
-+typedef enum
-+{
-+ DUMMY_ERROR, /* unexpected end of input stream */
-+ DUMMY_LIT,
-+ DUMMY_MATCH,
-+ DUMMY_REP
-+} ELzmaDummy;
-+
-+static ELzmaDummy LzmaDec_TryDummy(const CLzmaDec *p, const Byte *buf, SizeT inSize)
-+{
-+ UInt32 range = p->range;
-+ UInt32 code = p->code;
-+ const Byte *bufLimit = buf + inSize;
-+ CLzmaProb *probs = p->probs;
-+ unsigned state = p->state;
-+ ELzmaDummy res;
-+
-+ {
-+ CLzmaProb *prob;
-+ UInt32 bound;
-+ unsigned ttt;
-+ unsigned posState = (p->processedPos) & ((1 << p->prop.pb) - 1);
-+
-+ prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
-+ IF_BIT_0_CHECK(prob)
-+ {
-+ UPDATE_0_CHECK
-+
-+ /* if (bufLimit - buf >= 7) return DUMMY_LIT; */
-+
-+ prob = probs + Literal;
-+ if (p->checkDicSize != 0 || p->processedPos != 0)
-+ prob += (LZMA_LIT_SIZE *
-+ ((((p->processedPos) & ((1 << (p->prop.lp)) - 1)) << p->prop.lc) +
-+ (p->dic[(p->dicPos == 0 ? p->dicBufSize : p->dicPos) - 1] >> (8 - p->prop.lc))));
-+
-+ if (state < kNumLitStates)
-+ {
-+ unsigned symbol = 1;
-+ do { GET_BIT_CHECK(prob + symbol, symbol) } while (symbol < 0x100);
-+ }
-+ else
-+ {
-+ unsigned matchByte = p->dic[p->dicPos - p->reps[0] +
-+ ((p->dicPos < p->reps[0]) ? p->dicBufSize : 0)];
-+ unsigned offs = 0x100;
-+ unsigned symbol = 1;
-+ do
-+ {
-+ unsigned bit;
-+ CLzmaProb *probLit;
-+ matchByte <<= 1;
-+ bit = (matchByte & offs);
-+ probLit = prob + offs + bit + symbol;
-+ GET_BIT2_CHECK(probLit, symbol, offs &= ~bit, offs &= bit)
-+ }
-+ while (symbol < 0x100);
-+ }
-+ res = DUMMY_LIT;
-+ }
-+ else
-+ {
-+ unsigned len;
-+ UPDATE_1_CHECK;
-+
-+ prob = probs + IsRep + state;
-+ IF_BIT_0_CHECK(prob)
-+ {
-+ UPDATE_0_CHECK;
-+ state = 0;
-+ prob = probs + LenCoder;
-+ res = DUMMY_MATCH;
-+ }
-+ else
-+ {
-+ UPDATE_1_CHECK;
-+ res = DUMMY_REP;
-+ prob = probs + IsRepG0 + state;
-+ IF_BIT_0_CHECK(prob)
-+ {
-+ UPDATE_0_CHECK;
-+ prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
-+ IF_BIT_0_CHECK(prob)
-+ {
-+ UPDATE_0_CHECK;
-+ NORMALIZE_CHECK;
-+ return DUMMY_REP;
-+ }
-+ else
-+ {
-+ UPDATE_1_CHECK;
-+ }
-+ }
-+ else
-+ {
-+ UPDATE_1_CHECK;
-+ prob = probs + IsRepG1 + state;
-+ IF_BIT_0_CHECK(prob)
-+ {
-+ UPDATE_0_CHECK;
-+ }
-+ else
-+ {
-+ UPDATE_1_CHECK;
-+ prob = probs + IsRepG2 + state;
-+ IF_BIT_0_CHECK(prob)
-+ {
-+ UPDATE_0_CHECK;
-+ }
-+ else
-+ {
-+ UPDATE_1_CHECK;
-+ }
-+ }
-+ }
-+ state = kNumStates;
-+ prob = probs + RepLenCoder;
-+ }
-+ {
-+ unsigned limit, offset;
-+ CLzmaProb *probLen = prob + LenChoice;
-+ IF_BIT_0_CHECK(probLen)
-+ {
-+ UPDATE_0_CHECK;
-+ probLen = prob + LenLow + (posState << kLenNumLowBits);
-+ offset = 0;
-+ limit = 1 << kLenNumLowBits;
-+ }
-+ else
-+ {
-+ UPDATE_1_CHECK;
-+ probLen = prob + LenChoice2;
-+ IF_BIT_0_CHECK(probLen)
-+ {
-+ UPDATE_0_CHECK;
-+ probLen = prob + LenMid + (posState << kLenNumMidBits);
-+ offset = kLenNumLowSymbols;
-+ limit = 1 << kLenNumMidBits;
-+ }
-+ else
-+ {
-+ UPDATE_1_CHECK;
-+ probLen = prob + LenHigh;
-+ offset = kLenNumLowSymbols + kLenNumMidSymbols;
-+ limit = 1 << kLenNumHighBits;
-+ }
-+ }
-+ TREE_DECODE_CHECK(probLen, limit, len);
-+ len += offset;
-+ }
-+
-+ if (state < 4)
-+ {
-+ unsigned posSlot;
-+ prob = probs + PosSlot +
-+ ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
-+ kNumPosSlotBits);
-+ TREE_DECODE_CHECK(prob, 1 << kNumPosSlotBits, posSlot);
-+ if (posSlot >= kStartPosModelIndex)
-+ {
-+ int numDirectBits = ((posSlot >> 1) - 1);
-+
-+ /* if (bufLimit - buf >= 8) return DUMMY_MATCH; */
-+
-+ if (posSlot < kEndPosModelIndex)
-+ {
-+ prob = probs + SpecPos + ((2 | (posSlot & 1)) << numDirectBits) - posSlot - 1;
-+ }
-+ else
-+ {
-+ numDirectBits -= kNumAlignBits;
-+ do
-+ {
-+ NORMALIZE_CHECK
-+ range >>= 1;
-+ code -= range & (((code - range) >> 31) - 1);
-+ /* if (code >= range) code -= range; */
-+ }
-+ while (--numDirectBits != 0);
-+ prob = probs + Align;
-+ numDirectBits = kNumAlignBits;
-+ }
-+ {
-+ unsigned i = 1;
-+ do
-+ {
-+ GET_BIT_CHECK(prob + i, i);
-+ }
-+ while (--numDirectBits != 0);
-+ }
-+ }
-+ }
-+ }
-+ }
-+ NORMALIZE_CHECK;
-+ return res;
-+}
-+
-+
-+static void LzmaDec_InitRc(CLzmaDec *p, const Byte *data)
-+{
-+ p->code = ((UInt32)data[1] << 24) | ((UInt32)data[2] << 16) | ((UInt32)data[3] << 8) | ((UInt32)data[4]);
-+ p->range = 0xFFFFFFFF;
-+ p->needFlush = 0;
-+}
-+
-+void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
-+{
-+ p->needFlush = 1;
-+ p->remainLen = 0;
-+ p->tempBufSize = 0;
-+
-+ if (initDic)
-+ {
-+ p->processedPos = 0;
-+ p->checkDicSize = 0;
-+ p->needInitState = 1;
-+ }
-+ if (initState)
-+ p->needInitState = 1;
-+}
-+
-+void LzmaDec_Init(CLzmaDec *p)
-+{
-+ p->dicPos = 0;
-+ LzmaDec_InitDicAndState(p, True, True);
-+}
-+
-+static void LzmaDec_InitStateReal(CLzmaDec *p)
-+{
-+ UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (p->prop.lc + p->prop.lp));
-+ UInt32 i;
-+ CLzmaProb *probs = p->probs;
-+ for (i = 0; i < numProbs; i++)
-+ probs[i] = kBitModelTotal >> 1;
-+ p->reps[0] = p->reps[1] = p->reps[2] = p->reps[3] = 1;
-+ p->state = 0;
-+ p->needInitState = 0;
-+}
-+
-+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
-+ ELzmaFinishMode finishMode, ELzmaStatus *status)
-+{
-+ SizeT inSize = *srcLen;
-+ (*srcLen) = 0;
-+ LzmaDec_WriteRem(p, dicLimit);
-+
-+ *status = LZMA_STATUS_NOT_SPECIFIED;
-+
-+ while (p->remainLen != kMatchSpecLenStart)
-+ {
-+ int checkEndMarkNow;
-+
-+ if (p->needFlush != 0)
-+ {
-+ for (; inSize > 0 && p->tempBufSize < RC_INIT_SIZE; (*srcLen)++, inSize--)
-+ p->tempBuf[p->tempBufSize++] = *src++;
-+ if (p->tempBufSize < RC_INIT_SIZE)
-+ {
-+ *status = LZMA_STATUS_NEEDS_MORE_INPUT;
-+ return SZ_OK;
-+ }
-+ if (p->tempBuf[0] != 0)
-+ return SZ_ERROR_DATA;
-+
-+ LzmaDec_InitRc(p, p->tempBuf);
-+ p->tempBufSize = 0;
-+ }
-+
-+ checkEndMarkNow = 0;
-+ if (p->dicPos >= dicLimit)
-+ {
-+ if (p->remainLen == 0 && p->code == 0)
-+ {
-+ *status = LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK;
-+ return SZ_OK;
-+ }
-+ if (finishMode == LZMA_FINISH_ANY)
-+ {
-+ *status = LZMA_STATUS_NOT_FINISHED;
-+ return SZ_OK;
-+ }
-+ if (p->remainLen != 0)
-+ {
-+ *status = LZMA_STATUS_NOT_FINISHED;
-+ return SZ_ERROR_DATA;
-+ }
-+ checkEndMarkNow = 1;
-+ }
-+
-+ if (p->needInitState)
-+ LzmaDec_InitStateReal(p);
-+
-+ if (p->tempBufSize == 0)
-+ {
-+ SizeT processed;
-+ const Byte *bufLimit;
-+ if (inSize < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
-+ {
-+ int dummyRes = LzmaDec_TryDummy(p, src, inSize);
-+ if (dummyRes == DUMMY_ERROR)
-+ {
-+ memcpy(p->tempBuf, src, inSize);
-+ p->tempBufSize = (unsigned)inSize;
-+ (*srcLen) += inSize;
-+ *status = LZMA_STATUS_NEEDS_MORE_INPUT;
-+ return SZ_OK;
-+ }
-+ if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
-+ {
-+ *status = LZMA_STATUS_NOT_FINISHED;
-+ return SZ_ERROR_DATA;
-+ }
-+ bufLimit = src;
-+ }
-+ else
-+ bufLimit = src + inSize - LZMA_REQUIRED_INPUT_MAX;
-+ p->buf = src;
-+ if (LzmaDec_DecodeReal2(p, dicLimit, bufLimit) != 0)
-+ return SZ_ERROR_DATA;
-+ processed = (SizeT)(p->buf - src);
-+ (*srcLen) += processed;
-+ src += processed;
-+ inSize -= processed;
-+ }
-+ else
-+ {
-+ unsigned rem = p->tempBufSize, lookAhead = 0;
-+ while (rem < LZMA_REQUIRED_INPUT_MAX && lookAhead < inSize)
-+ p->tempBuf[rem++] = src[lookAhead++];
-+ p->tempBufSize = rem;
-+ if (rem < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
-+ {
-+ int dummyRes = LzmaDec_TryDummy(p, p->tempBuf, rem);
-+ if (dummyRes == DUMMY_ERROR)
-+ {
-+ (*srcLen) += lookAhead;
-+ *status = LZMA_STATUS_NEEDS_MORE_INPUT;
-+ return SZ_OK;
-+ }
-+ if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
-+ {
-+ *status = LZMA_STATUS_NOT_FINISHED;
-+ return SZ_ERROR_DATA;
-+ }
-+ }
-+ p->buf = p->tempBuf;
-+ if (LzmaDec_DecodeReal2(p, dicLimit, p->buf) != 0)
-+ return SZ_ERROR_DATA;
-+ lookAhead -= (rem - (unsigned)(p->buf - p->tempBuf));
-+ (*srcLen) += lookAhead;
-+ src += lookAhead;
-+ inSize -= lookAhead;
-+ p->tempBufSize = 0;
-+ }
-+ }
-+ if (p->code == 0)
-+ *status = LZMA_STATUS_FINISHED_WITH_MARK;
-+ return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
-+}
-+
-+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
-+{
-+ SizeT outSize = *destLen;
-+ SizeT inSize = *srcLen;
-+ *srcLen = *destLen = 0;
-+ for (;;)
-+ {
-+ SizeT inSizeCur = inSize, outSizeCur, dicPos;
-+ ELzmaFinishMode curFinishMode;
-+ SRes res;
-+ if (p->dicPos == p->dicBufSize)
-+ p->dicPos = 0;
-+ dicPos = p->dicPos;
-+ if (outSize > p->dicBufSize - dicPos)
-+ {
-+ outSizeCur = p->dicBufSize;
-+ curFinishMode = LZMA_FINISH_ANY;
-+ }
-+ else
-+ {
-+ outSizeCur = dicPos + outSize;
-+ curFinishMode = finishMode;
-+ }
-+
-+ res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status);
-+ src += inSizeCur;
-+ inSize -= inSizeCur;
-+ *srcLen += inSizeCur;
-+ outSizeCur = p->dicPos - dicPos;
-+ memcpy(dest, p->dic + dicPos, outSizeCur);
-+ dest += outSizeCur;
-+ outSize -= outSizeCur;
-+ *destLen += outSizeCur;
-+ if (res != 0)
-+ return res;
-+ if (outSizeCur == 0 || outSize == 0)
-+ return SZ_OK;
-+ }
-+}
-+
-+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
-+{
-+ alloc->Free(alloc, p->probs);
-+ p->probs = 0;
-+}
-+
-+static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc)
-+{
-+ alloc->Free(alloc, p->dic);
-+ p->dic = 0;
-+}
-+
-+void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
-+{
-+ LzmaDec_FreeProbs(p, alloc);
-+ LzmaDec_FreeDict(p, alloc);
-+}
-+
-+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
-+{
-+ UInt32 dicSize;
-+ Byte d;
-+
-+ if (size < LZMA_PROPS_SIZE)
-+ return SZ_ERROR_UNSUPPORTED;
-+ else
-+ dicSize = data[1] | ((UInt32)data[2] << 8) | ((UInt32)data[3] << 16) | ((UInt32)data[4] << 24);
-+
-+ if (dicSize < LZMA_DIC_MIN)
-+ dicSize = LZMA_DIC_MIN;
-+ p->dicSize = dicSize;
-+
-+ d = data[0];
-+ if (d >= (9 * 5 * 5))
-+ return SZ_ERROR_UNSUPPORTED;
-+
-+ p->lc = d % 9;
-+ d /= 9;
-+ p->pb = d / 5;
-+ p->lp = d % 5;
-+
-+ return SZ_OK;
-+}
-+
-+static SRes LzmaDec_AllocateProbs2(CLzmaDec *p, const CLzmaProps *propNew, ISzAlloc *alloc)
-+{
-+ UInt32 numProbs = LzmaProps_GetNumProbs(propNew);
-+ if (p->probs == 0 || numProbs != p->numProbs)
-+ {
-+ LzmaDec_FreeProbs(p, alloc);
-+ p->probs = (CLzmaProb *)alloc->Alloc(alloc, numProbs * sizeof(CLzmaProb));
-+ p->numProbs = numProbs;
-+ if (p->probs == 0)
-+ return SZ_ERROR_MEM;
-+ }
-+ return SZ_OK;
-+}
-+
-+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
-+{
-+ CLzmaProps propNew;
-+ RINOK(LzmaProps_Decode(&propNew, props, propsSize));
-+ RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
-+ p->prop = propNew;
-+ return SZ_OK;
-+}
-+
-+SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
-+{
-+ CLzmaProps propNew;
-+ SizeT dicBufSize;
-+ RINOK(LzmaProps_Decode(&propNew, props, propsSize));
-+ RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
-+ dicBufSize = propNew.dicSize;
-+ if (p->dic == 0 || dicBufSize != p->dicBufSize)
-+ {
-+ LzmaDec_FreeDict(p, alloc);
-+ p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize);
-+ if (p->dic == 0)
-+ {
-+ LzmaDec_FreeProbs(p, alloc);
-+ return SZ_ERROR_MEM;
-+ }
-+ }
-+ p->dicBufSize = dicBufSize;
-+ p->prop = propNew;
-+ return SZ_OK;
-+}
-+
-+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
-+ const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
-+ ELzmaStatus *status, ISzAlloc *alloc)
-+{
-+ CLzmaDec p;
-+ SRes res;
-+ SizeT inSize = *srcLen;
-+ SizeT outSize = *destLen;
-+ *srcLen = *destLen = 0;
-+ if (inSize < RC_INIT_SIZE)
-+ return SZ_ERROR_INPUT_EOF;
-+
-+ LzmaDec_Construct(&p);
-+ res = LzmaDec_AllocateProbs(&p, propData, propSize, alloc);
-+ if (res != 0)
-+ return res;
-+ p.dic = dest;
-+ p.dicBufSize = outSize;
-+
-+ LzmaDec_Init(&p);
-+
-+ *srcLen = inSize;
-+ res = LzmaDec_DecodeToDic(&p, outSize, src, srcLen, finishMode, status);
-+
-+ if (res == SZ_OK && *status == LZMA_STATUS_NEEDS_MORE_INPUT)
-+ res = SZ_ERROR_INPUT_EOF;
-+
-+ (*destLen) = p.dicPos;
-+ LzmaDec_FreeProbs(&p, alloc);
-+ return res;
-+}
---- /dev/null
-+++ b/lib/lzma/LzmaEnc.c
-@@ -0,0 +1,2271 @@
-+/* LzmaEnc.c -- LZMA Encoder
-+2009-11-24 : Igor Pavlov : Public domain */
-+
-+#include <string.h>
-+
-+/* #define SHOW_STAT */
-+/* #define SHOW_STAT2 */
-+
-+#if defined(SHOW_STAT) || defined(SHOW_STAT2)
-+#include <stdio.h>
-+#endif
-+
-+#include "LzmaEnc.h"
-+
-+/* disable MT */
-+#define _7ZIP_ST
-+
-+#include "LzFind.h"
-+#ifndef _7ZIP_ST
-+#include "LzFindMt.h"
-+#endif
-+
-+#ifdef SHOW_STAT
-+static int ttt = 0;
-+#endif
-+
-+#define kBlockSizeMax ((1 << LZMA_NUM_BLOCK_SIZE_BITS) - 1)
-+
-+#define kBlockSize (9 << 10)
-+#define kUnpackBlockSize (1 << 18)
-+#define kMatchArraySize (1 << 21)
-+#define kMatchRecordMaxSize ((LZMA_MATCH_LEN_MAX * 2 + 3) * LZMA_MATCH_LEN_MAX)
-+
-+#define kNumMaxDirectBits (31)
-+
-+#define kNumTopBits 24
-+#define kTopValue ((UInt32)1 << kNumTopBits)
-+
-+#define kNumBitModelTotalBits 11
-+#define kBitModelTotal (1 << kNumBitModelTotalBits)
-+#define kNumMoveBits 5
-+#define kProbInitValue (kBitModelTotal >> 1)
-+
-+#define kNumMoveReducingBits 4
-+#define kNumBitPriceShiftBits 4
-+#define kBitPrice (1 << kNumBitPriceShiftBits)
-+
-+void LzmaEncProps_Init(CLzmaEncProps *p)
-+{
-+ p->level = 5;
-+ p->dictSize = p->mc = 0;
-+ p->lc = p->lp = p->pb = p->algo = p->fb = p->btMode = p->numHashBytes = p->numThreads = -1;
-+ p->writeEndMark = 0;
-+}
-+
-+void LzmaEncProps_Normalize(CLzmaEncProps *p)
-+{
-+ int level = p->level;
-+ if (level < 0) level = 5;
-+ p->level = level;
-+ if (p->dictSize == 0) p->dictSize = (level <= 5 ? (1 << (level * 2 + 14)) : (level == 6 ? (1 << 25) : (1 << 26)));
-+ if (p->lc < 0) p->lc = 3;
-+ if (p->lp < 0) p->lp = 0;
-+ if (p->pb < 0) p->pb = 2;
-+ if (p->algo < 0) p->algo = (level < 5 ? 0 : 1);
-+ if (p->fb < 0) p->fb = (level < 7 ? 32 : 64);
-+ if (p->btMode < 0) p->btMode = (p->algo == 0 ? 0 : 1);
-+ if (p->numHashBytes < 0) p->numHashBytes = 4;
-+ if (p->mc == 0) p->mc = (16 + (p->fb >> 1)) >> (p->btMode ? 0 : 1);
-+ if (p->numThreads < 0)
-+ p->numThreads =
-+ #ifndef _7ZIP_ST
-+ ((p->btMode && p->algo) ? 2 : 1);
-+ #else
-+ 1;
-+ #endif
-+}
-+
-+UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
-+{
-+ CLzmaEncProps props = *props2;
-+ LzmaEncProps_Normalize(&props);
-+ return props.dictSize;
-+}
-+
-+/* #define LZMA_LOG_BSR */
-+/* Define it for Intel's CPU */
-+
-+
-+#ifdef LZMA_LOG_BSR
-+
-+#define kDicLogSizeMaxCompress 30
-+
-+#define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); }
-+
-+UInt32 GetPosSlot1(UInt32 pos)
-+{
-+ UInt32 res;
-+ BSR2_RET(pos, res);
-+ return res;
-+}
-+#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
-+#define GetPosSlot(pos, res) { if (pos < 2) res = pos; else BSR2_RET(pos, res); }
-+
-+#else
-+
-+#define kNumLogBits (9 + (int)sizeof(size_t) / 2)
-+#define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7)
-+
-+void LzmaEnc_FastPosInit(Byte *g_FastPos)
-+{
-+ int c = 2, slotFast;
-+ g_FastPos[0] = 0;
-+ g_FastPos[1] = 1;
-+
-+ for (slotFast = 2; slotFast < kNumLogBits * 2; slotFast++)
-+ {
-+ UInt32 k = (1 << ((slotFast >> 1) - 1));
-+ UInt32 j;
-+ for (j = 0; j < k; j++, c++)
-+ g_FastPos[c] = (Byte)slotFast;
-+ }
-+}
-+
-+#define BSR2_RET(pos, res) { UInt32 i = 6 + ((kNumLogBits - 1) & \
-+ (0 - (((((UInt32)1 << (kNumLogBits + 6)) - 1) - pos) >> 31))); \
-+ res = p->g_FastPos[pos >> i] + (i * 2); }
-+/*
-+#define BSR2_RET(pos, res) { res = (pos < (1 << (kNumLogBits + 6))) ? \
-+ p->g_FastPos[pos >> 6] + 12 : \
-+ p->g_FastPos[pos >> (6 + kNumLogBits - 1)] + (6 + (kNumLogBits - 1)) * 2; }
-+*/
-+
-+#define GetPosSlot1(pos) p->g_FastPos[pos]
-+#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
-+#define GetPosSlot(pos, res) { if (pos < kNumFullDistances) res = p->g_FastPos[pos]; else BSR2_RET(pos, res); }
-+
-+#endif
-+
-+
-+#define LZMA_NUM_REPS 4
-+
-+typedef unsigned CState;
-+
-+typedef struct
-+{
-+ UInt32 price;
-+
-+ CState state;
-+ int prev1IsChar;
-+ int prev2;
-+
-+ UInt32 posPrev2;
-+ UInt32 backPrev2;
-+
-+ UInt32 posPrev;
-+ UInt32 backPrev;
-+ UInt32 backs[LZMA_NUM_REPS];
-+} COptimal;
-+
-+#define kNumOpts (1 << 12)
-+
-+#define kNumLenToPosStates 4
-+#define kNumPosSlotBits 6
-+#define kDicLogSizeMin 0
-+#define kDicLogSizeMax 32
-+#define kDistTableSizeMax (kDicLogSizeMax * 2)
-+
-+
-+#define kNumAlignBits 4
-+#define kAlignTableSize (1 << kNumAlignBits)
-+#define kAlignMask (kAlignTableSize - 1)
-+
-+#define kStartPosModelIndex 4
-+#define kEndPosModelIndex 14
-+#define kNumPosModels (kEndPosModelIndex - kStartPosModelIndex)
-+
-+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-+
-+#ifdef _LZMA_PROB32
-+#define CLzmaProb UInt32
-+#else
-+#define CLzmaProb UInt16
-+#endif
-+
-+#define LZMA_PB_MAX 4
-+#define LZMA_LC_MAX 8
-+#define LZMA_LP_MAX 4
-+
-+#define LZMA_NUM_PB_STATES_MAX (1 << LZMA_PB_MAX)
-+
-+
-+#define kLenNumLowBits 3
-+#define kLenNumLowSymbols (1 << kLenNumLowBits)
-+#define kLenNumMidBits 3
-+#define kLenNumMidSymbols (1 << kLenNumMidBits)
-+#define kLenNumHighBits 8
-+#define kLenNumHighSymbols (1 << kLenNumHighBits)
-+
-+#define kLenNumSymbolsTotal (kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
-+
-+#define LZMA_MATCH_LEN_MIN 2
-+#define LZMA_MATCH_LEN_MAX (LZMA_MATCH_LEN_MIN + kLenNumSymbolsTotal - 1)
-+
-+#define kNumStates 12
-+
-+typedef struct
-+{
-+ CLzmaProb choice;
-+ CLzmaProb choice2;
-+ CLzmaProb low[LZMA_NUM_PB_STATES_MAX << kLenNumLowBits];
-+ CLzmaProb mid[LZMA_NUM_PB_STATES_MAX << kLenNumMidBits];
-+ CLzmaProb high[kLenNumHighSymbols];
-+} CLenEnc;
-+
-+typedef struct
-+{
-+ CLenEnc p;
-+ UInt32 prices[LZMA_NUM_PB_STATES_MAX][kLenNumSymbolsTotal];
-+ UInt32 tableSize;
-+ UInt32 counters[LZMA_NUM_PB_STATES_MAX];
-+} CLenPriceEnc;
-+
-+typedef struct
-+{
-+ UInt32 range;
-+ Byte cache;
-+ UInt64 low;
-+ UInt64 cacheSize;
-+ Byte *buf;
-+ Byte *bufLim;
-+ Byte *bufBase;
-+ ISeqOutStream *outStream;
-+ UInt64 processed;
-+ SRes res;
-+} CRangeEnc;
-+
-+typedef struct
-+{
-+ CLzmaProb *litProbs;
-+
-+ CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+ CLzmaProb isRep[kNumStates];
-+ CLzmaProb isRepG0[kNumStates];
-+ CLzmaProb isRepG1[kNumStates];
-+ CLzmaProb isRepG2[kNumStates];
-+ CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+
-+ CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
-+ CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
-+ CLzmaProb posAlignEncoder[1 << kNumAlignBits];
-+
-+ CLenPriceEnc lenEnc;
-+ CLenPriceEnc repLenEnc;
-+
-+ UInt32 reps[LZMA_NUM_REPS];
-+ UInt32 state;
-+} CSaveState;
-+
-+typedef struct
-+{
-+ IMatchFinder matchFinder;
-+ void *matchFinderObj;
-+
-+ #ifndef _7ZIP_ST
-+ Bool mtMode;
-+ CMatchFinderMt matchFinderMt;
-+ #endif
-+
-+ CMatchFinder matchFinderBase;
-+
-+ #ifndef _7ZIP_ST
-+ Byte pad[128];
-+ #endif
-+
-+ UInt32 optimumEndIndex;
-+ UInt32 optimumCurrentIndex;
-+
-+ UInt32 longestMatchLength;
-+ UInt32 numPairs;
-+ UInt32 numAvail;
-+ COptimal opt[kNumOpts];
-+
-+ #ifndef LZMA_LOG_BSR
-+ Byte g_FastPos[1 << kNumLogBits];
-+ #endif
-+
-+ UInt32 ProbPrices[kBitModelTotal >> kNumMoveReducingBits];
-+ UInt32 matches[LZMA_MATCH_LEN_MAX * 2 + 2 + 1];
-+ UInt32 numFastBytes;
-+ UInt32 additionalOffset;
-+ UInt32 reps[LZMA_NUM_REPS];
-+ UInt32 state;
-+
-+ UInt32 posSlotPrices[kNumLenToPosStates][kDistTableSizeMax];
-+ UInt32 distancesPrices[kNumLenToPosStates][kNumFullDistances];
-+ UInt32 alignPrices[kAlignTableSize];
-+ UInt32 alignPriceCount;
-+
-+ UInt32 distTableSize;
-+
-+ unsigned lc, lp, pb;
-+ unsigned lpMask, pbMask;
-+
-+ CLzmaProb *litProbs;
-+
-+ CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+ CLzmaProb isRep[kNumStates];
-+ CLzmaProb isRepG0[kNumStates];
-+ CLzmaProb isRepG1[kNumStates];
-+ CLzmaProb isRepG2[kNumStates];
-+ CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+
-+ CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
-+ CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
-+ CLzmaProb posAlignEncoder[1 << kNumAlignBits];
-+
-+ CLenPriceEnc lenEnc;
-+ CLenPriceEnc repLenEnc;
-+
-+ unsigned lclp;
-+
-+ Bool fastMode;
-+
-+ CRangeEnc rc;
-+
-+ Bool writeEndMark;
-+ UInt64 nowPos64;
-+ UInt32 matchPriceCount;
-+ Bool finished;
-+ Bool multiThread;
-+
-+ SRes result;
-+ UInt32 dictSize;
-+ UInt32 matchFinderCycles;
-+
-+ int needInit;
-+
-+ CSaveState saveState;
-+} CLzmaEnc;
-+
-+void LzmaEnc_SaveState(CLzmaEncHandle pp)
-+{
-+ CLzmaEnc *p = (CLzmaEnc *)pp;
-+ CSaveState *dest = &p->saveState;
-+ int i;
-+ dest->lenEnc = p->lenEnc;
-+ dest->repLenEnc = p->repLenEnc;
-+ dest->state = p->state;
-+
-+ for (i = 0; i < kNumStates; i++)
-+ {
-+ memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
-+ memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
-+ }
-+ for (i = 0; i < kNumLenToPosStates; i++)
-+ memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
-+ memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
-+ memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
-+ memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
-+ memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
-+ memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
-+ memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
-+ memcpy(dest->reps, p->reps, sizeof(p->reps));
-+ memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb));
-+}
-+
-+void LzmaEnc_RestoreState(CLzmaEncHandle pp)
-+{
-+ CLzmaEnc *dest = (CLzmaEnc *)pp;
-+ const CSaveState *p = &dest->saveState;
-+ int i;
-+ dest->lenEnc = p->lenEnc;
-+ dest->repLenEnc = p->repLenEnc;
-+ dest->state = p->state;
-+
-+ for (i = 0; i < kNumStates; i++)
-+ {
-+ memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
-+ memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
-+ }
-+ for (i = 0; i < kNumLenToPosStates; i++)
-+ memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
-+ memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
-+ memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
-+ memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
-+ memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
-+ memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
-+ memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
-+ memcpy(dest->reps, p->reps, sizeof(p->reps));
-+ memcpy(dest->litProbs, p->litProbs, (0x300 << dest->lclp) * sizeof(CLzmaProb));
-+}
-+
-+SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2)
-+{
-+ CLzmaEnc *p = (CLzmaEnc *)pp;
-+ CLzmaEncProps props = *props2;
-+ LzmaEncProps_Normalize(&props);
-+
-+ if (props.lc > LZMA_LC_MAX || props.lp > LZMA_LP_MAX || props.pb > LZMA_PB_MAX ||
-+ props.dictSize > (1 << kDicLogSizeMaxCompress) || props.dictSize > (1 << 30))
-+ return SZ_ERROR_PARAM;
-+ p->dictSize = props.dictSize;
-+ p->matchFinderCycles = props.mc;
-+ {
-+ unsigned fb = props.fb;
-+ if (fb < 5)
-+ fb = 5;
-+ if (fb > LZMA_MATCH_LEN_MAX)
-+ fb = LZMA_MATCH_LEN_MAX;
-+ p->numFastBytes = fb;
-+ }
-+ p->lc = props.lc;
-+ p->lp = props.lp;
-+ p->pb = props.pb;
-+ p->fastMode = (props.algo == 0);
-+ p->matchFinderBase.btMode = props.btMode;
-+ {
-+ UInt32 numHashBytes = 4;
-+ if (props.btMode)
-+ {
-+ if (props.numHashBytes < 2)
-+ numHashBytes = 2;
-+ else if (props.numHashBytes < 4)
-+ numHashBytes = props.numHashBytes;
-+ }
-+ p->matchFinderBase.numHashBytes = numHashBytes;
-+ }
-+
-+ p->matchFinderBase.cutValue = props.mc;
-+
-+ p->writeEndMark = props.writeEndMark;
-+
-+ #ifndef _7ZIP_ST
-+ /*
-+ if (newMultiThread != _multiThread)
-+ {
-+ ReleaseMatchFinder();
-+ _multiThread = newMultiThread;
-+ }
-+ */
-+ p->multiThread = (props.numThreads > 1);
-+ #endif
-+
-+ return SZ_OK;
-+}
-+
-+static const int kLiteralNextStates[kNumStates] = {0, 0, 0, 0, 1, 2, 3, 4, 5, 6, 4, 5};
-+static const int kMatchNextStates[kNumStates] = {7, 7, 7, 7, 7, 7, 7, 10, 10, 10, 10, 10};
-+static const int kRepNextStates[kNumStates] = {8, 8, 8, 8, 8, 8, 8, 11, 11, 11, 11, 11};
-+static const int kShortRepNextStates[kNumStates]= {9, 9, 9, 9, 9, 9, 9, 11, 11, 11, 11, 11};
-+
-+#define IsCharState(s) ((s) < 7)
-+
-+#define GetLenToPosState(len) (((len) < kNumLenToPosStates + 1) ? (len) - 2 : kNumLenToPosStates - 1)
-+
-+#define kInfinityPrice (1 << 30)
-+
-+static void RangeEnc_Construct(CRangeEnc *p)
-+{
-+ p->outStream = 0;
-+ p->bufBase = 0;
-+}
-+
-+#define RangeEnc_GetProcessed(p) ((p)->processed + ((p)->buf - (p)->bufBase) + (p)->cacheSize)
-+
-+#define RC_BUF_SIZE (1 << 16)
-+static int RangeEnc_Alloc(CRangeEnc *p, ISzAlloc *alloc)
-+{
-+ if (p->bufBase == 0)
-+ {
-+ p->bufBase = (Byte *)alloc->Alloc(alloc, RC_BUF_SIZE);
-+ if (p->bufBase == 0)
-+ return 0;
-+ p->bufLim = p->bufBase + RC_BUF_SIZE;
-+ }
-+ return 1;
-+}
-+
-+static void RangeEnc_Free(CRangeEnc *p, ISzAlloc *alloc)
-+{
-+ alloc->Free(alloc, p->bufBase);
-+ p->bufBase = 0;
-+}
-+
-+static void RangeEnc_Init(CRangeEnc *p)
-+{
-+ /* Stream.Init(); */
-+ p->low = 0;
-+ p->range = 0xFFFFFFFF;
-+ p->cacheSize = 1;
-+ p->cache = 0;
-+
-+ p->buf = p->bufBase;
-+
-+ p->processed = 0;
-+ p->res = SZ_OK;
-+}
-+
-+static void RangeEnc_FlushStream(CRangeEnc *p)
-+{
-+ size_t num;
-+ if (p->res != SZ_OK)
-+ return;
-+ num = p->buf - p->bufBase;
-+ if (num != p->outStream->Write(p->outStream, p->bufBase, num))
-+ p->res = SZ_ERROR_WRITE;
-+ p->processed += num;
-+ p->buf = p->bufBase;
-+}
-+
-+static void MY_FAST_CALL RangeEnc_ShiftLow(CRangeEnc *p)
-+{
-+ if ((UInt32)p->low < (UInt32)0xFF000000 || (int)(p->low >> 32) != 0)
-+ {
-+ Byte temp = p->cache;
-+ do
-+ {
-+ Byte *buf = p->buf;
-+ *buf++ = (Byte)(temp + (Byte)(p->low >> 32));
-+ p->buf = buf;
-+ if (buf == p->bufLim)
-+ RangeEnc_FlushStream(p);
-+ temp = 0xFF;
-+ }
-+ while (--p->cacheSize != 0);
-+ p->cache = (Byte)((UInt32)p->low >> 24);
-+ }
-+ p->cacheSize++;
-+ p->low = (UInt32)p->low << 8;
-+}
-+
-+static void RangeEnc_FlushData(CRangeEnc *p)
-+{
-+ int i;
-+ for (i = 0; i < 5; i++)
-+ RangeEnc_ShiftLow(p);
-+}
-+
-+static void RangeEnc_EncodeDirectBits(CRangeEnc *p, UInt32 value, int numBits)
-+{
-+ do
-+ {
-+ p->range >>= 1;
-+ p->low += p->range & (0 - ((value >> --numBits) & 1));
-+ if (p->range < kTopValue)
-+ {
-+ p->range <<= 8;
-+ RangeEnc_ShiftLow(p);
-+ }
-+ }
-+ while (numBits != 0);
-+}
-+
-+static void RangeEnc_EncodeBit(CRangeEnc *p, CLzmaProb *prob, UInt32 symbol)
-+{
-+ UInt32 ttt = *prob;
-+ UInt32 newBound = (p->range >> kNumBitModelTotalBits) * ttt;
-+ if (symbol == 0)
-+ {
-+ p->range = newBound;
-+ ttt += (kBitModelTotal - ttt) >> kNumMoveBits;
-+ }
-+ else
-+ {
-+ p->low += newBound;
-+ p->range -= newBound;
-+ ttt -= ttt >> kNumMoveBits;
-+ }
-+ *prob = (CLzmaProb)ttt;
-+ if (p->range < kTopValue)
-+ {
-+ p->range <<= 8;
-+ RangeEnc_ShiftLow(p);
-+ }
-+}
-+
-+static void LitEnc_Encode(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol)
-+{
-+ symbol |= 0x100;
-+ do
-+ {
-+ RangeEnc_EncodeBit(p, probs + (symbol >> 8), (symbol >> 7) & 1);
-+ symbol <<= 1;
-+ }
-+ while (symbol < 0x10000);
-+}
-+
-+static void LitEnc_EncodeMatched(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol, UInt32 matchByte)
-+{
-+ UInt32 offs = 0x100;
-+ symbol |= 0x100;
-+ do
-+ {
-+ matchByte <<= 1;
-+ RangeEnc_EncodeBit(p, probs + (offs + (matchByte & offs) + (symbol >> 8)), (symbol >> 7) & 1);
-+ symbol <<= 1;
-+ offs &= ~(matchByte ^ symbol);
-+ }
-+ while (symbol < 0x10000);
-+}
-+
-+void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
-+{
-+ UInt32 i;
-+ for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits))
-+ {
-+ const int kCyclesBits = kNumBitPriceShiftBits;
-+ UInt32 w = i;
-+ UInt32 bitCount = 0;
-+ int j;
-+ for (j = 0; j < kCyclesBits; j++)
-+ {
-+ w = w * w;
-+ bitCount <<= 1;
-+ while (w >= ((UInt32)1 << 16))
-+ {
-+ w >>= 1;
-+ bitCount++;
-+ }
-+ }
-+ ProbPrices[i >> kNumMoveReducingBits] = ((kNumBitModelTotalBits << kCyclesBits) - 15 - bitCount);
-+ }
-+}
-+
-+
-+#define GET_PRICE(prob, symbol) \
-+ p->ProbPrices[((prob) ^ (((-(int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
-+
-+#define GET_PRICEa(prob, symbol) \
-+ ProbPrices[((prob) ^ ((-((int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
-+
-+#define GET_PRICE_0(prob) p->ProbPrices[(prob) >> kNumMoveReducingBits]
-+#define GET_PRICE_1(prob) p->ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
-+
-+#define GET_PRICE_0a(prob) ProbPrices[(prob) >> kNumMoveReducingBits]
-+#define GET_PRICE_1a(prob) ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
-+
-+static UInt32 LitEnc_GetPrice(const CLzmaProb *probs, UInt32 symbol, UInt32 *ProbPrices)
-+{
-+ UInt32 price = 0;
-+ symbol |= 0x100;
-+ do
-+ {
-+ price += GET_PRICEa(probs[symbol >> 8], (symbol >> 7) & 1);
-+ symbol <<= 1;
-+ }
-+ while (symbol < 0x10000);
-+ return price;
-+}
-+
-+static UInt32 LitEnc_GetPriceMatched(const CLzmaProb *probs, UInt32 symbol, UInt32 matchByte, UInt32 *ProbPrices)
-+{
-+ UInt32 price = 0;
-+ UInt32 offs = 0x100;
-+ symbol |= 0x100;
-+ do
-+ {
-+ matchByte <<= 1;
-+ price += GET_PRICEa(probs[offs + (matchByte & offs) + (symbol >> 8)], (symbol >> 7) & 1);
-+ symbol <<= 1;
-+ offs &= ~(matchByte ^ symbol);
-+ }
-+ while (symbol < 0x10000);
-+ return price;
-+}
-+
-+
-+static void RcTree_Encode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
-+{
-+ UInt32 m = 1;
-+ int i;
-+ for (i = numBitLevels; i != 0;)
-+ {
-+ UInt32 bit;
-+ i--;
-+ bit = (symbol >> i) & 1;
-+ RangeEnc_EncodeBit(rc, probs + m, bit);
-+ m = (m << 1) | bit;
-+ }
-+}
-+
-+static void RcTree_ReverseEncode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
-+{
-+ UInt32 m = 1;
-+ int i;
-+ for (i = 0; i < numBitLevels; i++)
-+ {
-+ UInt32 bit = symbol & 1;
-+ RangeEnc_EncodeBit(rc, probs + m, bit);
-+ m = (m << 1) | bit;
-+ symbol >>= 1;
-+ }
-+}
-+
-+static UInt32 RcTree_GetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
-+{
-+ UInt32 price = 0;
-+ symbol |= (1 << numBitLevels);
-+ while (symbol != 1)
-+ {
-+ price += GET_PRICEa(probs[symbol >> 1], symbol & 1);
-+ symbol >>= 1;
-+ }
-+ return price;
-+}
-+
-+static UInt32 RcTree_ReverseGetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
-+{
-+ UInt32 price = 0;
-+ UInt32 m = 1;
-+ int i;
-+ for (i = numBitLevels; i != 0; i--)
-+ {
-+ UInt32 bit = symbol & 1;
-+ symbol >>= 1;
-+ price += GET_PRICEa(probs[m], bit);
-+ m = (m << 1) | bit;
-+ }
-+ return price;
-+}
-+
-+
-+static void LenEnc_Init(CLenEnc *p)
-+{
-+ unsigned i;
-+ p->choice = p->choice2 = kProbInitValue;
-+ for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumLowBits); i++)
-+ p->low[i] = kProbInitValue;
-+ for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumMidBits); i++)
-+ p->mid[i] = kProbInitValue;
-+ for (i = 0; i < kLenNumHighSymbols; i++)
-+ p->high[i] = kProbInitValue;
-+}
-+
-+static void LenEnc_Encode(CLenEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState)
-+{
-+ if (symbol < kLenNumLowSymbols)
-+ {
-+ RangeEnc_EncodeBit(rc, &p->choice, 0);
-+ RcTree_Encode(rc, p->low + (posState << kLenNumLowBits), kLenNumLowBits, symbol);
-+ }
-+ else
-+ {
-+ RangeEnc_EncodeBit(rc, &p->choice, 1);
-+ if (symbol < kLenNumLowSymbols + kLenNumMidSymbols)
-+ {
-+ RangeEnc_EncodeBit(rc, &p->choice2, 0);
-+ RcTree_Encode(rc, p->mid + (posState << kLenNumMidBits), kLenNumMidBits, symbol - kLenNumLowSymbols);
-+ }
-+ else
-+ {
-+ RangeEnc_EncodeBit(rc, &p->choice2, 1);
-+ RcTree_Encode(rc, p->high, kLenNumHighBits, symbol - kLenNumLowSymbols - kLenNumMidSymbols);
-+ }
-+ }
-+}
-+
-+static void LenEnc_SetPrices(CLenEnc *p, UInt32 posState, UInt32 numSymbols, UInt32 *prices, UInt32 *ProbPrices)
-+{
-+ UInt32 a0 = GET_PRICE_0a(p->choice);
-+ UInt32 a1 = GET_PRICE_1a(p->choice);
-+ UInt32 b0 = a1 + GET_PRICE_0a(p->choice2);
-+ UInt32 b1 = a1 + GET_PRICE_1a(p->choice2);
-+ UInt32 i = 0;
-+ for (i = 0; i < kLenNumLowSymbols; i++)
-+ {
-+ if (i >= numSymbols)
-+ return;
-+ prices[i] = a0 + RcTree_GetPrice(p->low + (posState << kLenNumLowBits), kLenNumLowBits, i, ProbPrices);
-+ }
-+ for (; i < kLenNumLowSymbols + kLenNumMidSymbols; i++)
-+ {
-+ if (i >= numSymbols)
-+ return;
-+ prices[i] = b0 + RcTree_GetPrice(p->mid + (posState << kLenNumMidBits), kLenNumMidBits, i - kLenNumLowSymbols, ProbPrices);
-+ }
-+ for (; i < numSymbols; i++)
-+ prices[i] = b1 + RcTree_GetPrice(p->high, kLenNumHighBits, i - kLenNumLowSymbols - kLenNumMidSymbols, ProbPrices);
-+}
-+
-+static void MY_FAST_CALL LenPriceEnc_UpdateTable(CLenPriceEnc *p, UInt32 posState, UInt32 *ProbPrices)
-+{
-+ LenEnc_SetPrices(&p->p, posState, p->tableSize, p->prices[posState], ProbPrices);
-+ p->counters[posState] = p->tableSize;
-+}
-+
-+static void LenPriceEnc_UpdateTables(CLenPriceEnc *p, UInt32 numPosStates, UInt32 *ProbPrices)
-+{
-+ UInt32 posState;
-+ for (posState = 0; posState < numPosStates; posState++)
-+ LenPriceEnc_UpdateTable(p, posState, ProbPrices);
-+}
-+
-+static void LenEnc_Encode2(CLenPriceEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState, Bool updatePrice, UInt32 *ProbPrices)
-+{
-+ LenEnc_Encode(&p->p, rc, symbol, posState);
-+ if (updatePrice)
-+ if (--p->counters[posState] == 0)
-+ LenPriceEnc_UpdateTable(p, posState, ProbPrices);
-+}
-+
-+
-+
-+
-+static void MovePos(CLzmaEnc *p, UInt32 num)
-+{
-+ #ifdef SHOW_STAT
-+ ttt += num;
-+ printf("\n MovePos %d", num);
-+ #endif
-+ if (num != 0)
-+ {
-+ p->additionalOffset += num;
-+ p->matchFinder.Skip(p->matchFinderObj, num);
-+ }
-+}
-+
-+static UInt32 ReadMatchDistances(CLzmaEnc *p, UInt32 *numDistancePairsRes)
-+{
-+ UInt32 lenRes = 0, numPairs;
-+ p->numAvail = p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
-+ numPairs = p->matchFinder.GetMatches(p->matchFinderObj, p->matches);
-+ #ifdef SHOW_STAT
-+ printf("\n i = %d numPairs = %d ", ttt, numPairs / 2);
-+ ttt++;
-+ {
-+ UInt32 i;
-+ for (i = 0; i < numPairs; i += 2)
-+ printf("%2d %6d | ", p->matches[i], p->matches[i + 1]);
-+ }
-+ #endif
-+ if (numPairs > 0)
-+ {
-+ lenRes = p->matches[numPairs - 2];
-+ if (lenRes == p->numFastBytes)
-+ {
-+ const Byte *pby = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+ UInt32 distance = p->matches[numPairs - 1] + 1;
-+ UInt32 numAvail = p->numAvail;
-+ if (numAvail > LZMA_MATCH_LEN_MAX)
-+ numAvail = LZMA_MATCH_LEN_MAX;
-+ {
-+ const Byte *pby2 = pby - distance;
-+ for (; lenRes < numAvail && pby[lenRes] == pby2[lenRes]; lenRes++);
-+ }
-+ }
-+ }
-+ p->additionalOffset++;
-+ *numDistancePairsRes = numPairs;
-+ return lenRes;
-+}
-+
-+
-+#define MakeAsChar(p) (p)->backPrev = (UInt32)(-1); (p)->prev1IsChar = False;
-+#define MakeAsShortRep(p) (p)->backPrev = 0; (p)->prev1IsChar = False;
-+#define IsShortRep(p) ((p)->backPrev == 0)
-+
-+static UInt32 GetRepLen1Price(CLzmaEnc *p, UInt32 state, UInt32 posState)
-+{
-+ return
-+ GET_PRICE_0(p->isRepG0[state]) +
-+ GET_PRICE_0(p->isRep0Long[state][posState]);
-+}
-+
-+static UInt32 GetPureRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 state, UInt32 posState)
-+{
-+ UInt32 price;
-+ if (repIndex == 0)
-+ {
-+ price = GET_PRICE_0(p->isRepG0[state]);
-+ price += GET_PRICE_1(p->isRep0Long[state][posState]);
-+ }
-+ else
-+ {
-+ price = GET_PRICE_1(p->isRepG0[state]);
-+ if (repIndex == 1)
-+ price += GET_PRICE_0(p->isRepG1[state]);
-+ else
-+ {
-+ price += GET_PRICE_1(p->isRepG1[state]);
-+ price += GET_PRICE(p->isRepG2[state], repIndex - 2);
-+ }
-+ }
-+ return price;
-+}
-+
-+static UInt32 GetRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 len, UInt32 state, UInt32 posState)
-+{
-+ return p->repLenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN] +
-+ GetPureRepPrice(p, repIndex, state, posState);
-+}
-+
-+static UInt32 Backward(CLzmaEnc *p, UInt32 *backRes, UInt32 cur)
-+{
-+ UInt32 posMem = p->opt[cur].posPrev;
-+ UInt32 backMem = p->opt[cur].backPrev;
-+ p->optimumEndIndex = cur;
-+ do
-+ {
-+ if (p->opt[cur].prev1IsChar)
-+ {
-+ MakeAsChar(&p->opt[posMem])
-+ p->opt[posMem].posPrev = posMem - 1;
-+ if (p->opt[cur].prev2)
-+ {
-+ p->opt[posMem - 1].prev1IsChar = False;
-+ p->opt[posMem - 1].posPrev = p->opt[cur].posPrev2;
-+ p->opt[posMem - 1].backPrev = p->opt[cur].backPrev2;
-+ }
-+ }
-+ {
-+ UInt32 posPrev = posMem;
-+ UInt32 backCur = backMem;
-+
-+ backMem = p->opt[posPrev].backPrev;
-+ posMem = p->opt[posPrev].posPrev;
-+
-+ p->opt[posPrev].backPrev = backCur;
-+ p->opt[posPrev].posPrev = cur;
-+ cur = posPrev;
-+ }
-+ }
-+ while (cur != 0);
-+ *backRes = p->opt[0].backPrev;
-+ p->optimumCurrentIndex = p->opt[0].posPrev;
-+ return p->optimumCurrentIndex;
-+}
-+
-+#define LIT_PROBS(pos, prevByte) (p->litProbs + ((((pos) & p->lpMask) << p->lc) + ((prevByte) >> (8 - p->lc))) * 0x300)
-+
-+static UInt32 GetOptimum(CLzmaEnc *p, UInt32 position, UInt32 *backRes)
-+{
-+ UInt32 numAvail, mainLen, numPairs, repMaxIndex, i, posState, lenEnd, len, cur;
-+ UInt32 matchPrice, repMatchPrice, normalMatchPrice;
-+ UInt32 reps[LZMA_NUM_REPS], repLens[LZMA_NUM_REPS];
-+ UInt32 *matches;
-+ const Byte *data;
-+ Byte curByte, matchByte;
-+ if (p->optimumEndIndex != p->optimumCurrentIndex)
-+ {
-+ const COptimal *opt = &p->opt[p->optimumCurrentIndex];
-+ UInt32 lenRes = opt->posPrev - p->optimumCurrentIndex;
-+ *backRes = opt->backPrev;
-+ p->optimumCurrentIndex = opt->posPrev;
-+ return lenRes;
-+ }
-+ p->optimumCurrentIndex = p->optimumEndIndex = 0;
-+
-+ if (p->additionalOffset == 0)
-+ mainLen = ReadMatchDistances(p, &numPairs);
-+ else
-+ {
-+ mainLen = p->longestMatchLength;
-+ numPairs = p->numPairs;
-+ }
-+
-+ numAvail = p->numAvail;
-+ if (numAvail < 2)
-+ {
-+ *backRes = (UInt32)(-1);
-+ return 1;
-+ }
-+ if (numAvail > LZMA_MATCH_LEN_MAX)
-+ numAvail = LZMA_MATCH_LEN_MAX;
-+
-+ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+ repMaxIndex = 0;
-+ for (i = 0; i < LZMA_NUM_REPS; i++)
-+ {
-+ UInt32 lenTest;
-+ const Byte *data2;
-+ reps[i] = p->reps[i];
-+ data2 = data - (reps[i] + 1);
-+ if (data[0] != data2[0] || data[1] != data2[1])
-+ {
-+ repLens[i] = 0;
-+ continue;
-+ }
-+ for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
-+ repLens[i] = lenTest;
-+ if (lenTest > repLens[repMaxIndex])
-+ repMaxIndex = i;
-+ }
-+ if (repLens[repMaxIndex] >= p->numFastBytes)
-+ {
-+ UInt32 lenRes;
-+ *backRes = repMaxIndex;
-+ lenRes = repLens[repMaxIndex];
-+ MovePos(p, lenRes - 1);
-+ return lenRes;
-+ }
-+
-+ matches = p->matches;
-+ if (mainLen >= p->numFastBytes)
-+ {
-+ *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
-+ MovePos(p, mainLen - 1);
-+ return mainLen;
-+ }
-+ curByte = *data;
-+ matchByte = *(data - (reps[0] + 1));
-+
-+ if (mainLen < 2 && curByte != matchByte && repLens[repMaxIndex] < 2)
-+ {
-+ *backRes = (UInt32)-1;
-+ return 1;
-+ }
-+
-+ p->opt[0].state = (CState)p->state;
-+
-+ posState = (position & p->pbMask);
-+
-+ {
-+ const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
-+ p->opt[1].price = GET_PRICE_0(p->isMatch[p->state][posState]) +
-+ (!IsCharState(p->state) ?
-+ LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
-+ LitEnc_GetPrice(probs, curByte, p->ProbPrices));
-+ }
-+
-+ MakeAsChar(&p->opt[1]);
-+
-+ matchPrice = GET_PRICE_1(p->isMatch[p->state][posState]);
-+ repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[p->state]);
-+
-+ if (matchByte == curByte)
-+ {
-+ UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, p->state, posState);
-+ if (shortRepPrice < p->opt[1].price)
-+ {
-+ p->opt[1].price = shortRepPrice;
-+ MakeAsShortRep(&p->opt[1]);
-+ }
-+ }
-+ lenEnd = ((mainLen >= repLens[repMaxIndex]) ? mainLen : repLens[repMaxIndex]);
-+
-+ if (lenEnd < 2)
-+ {
-+ *backRes = p->opt[1].backPrev;
-+ return 1;
-+ }
-+
-+ p->opt[1].posPrev = 0;
-+ for (i = 0; i < LZMA_NUM_REPS; i++)
-+ p->opt[0].backs[i] = reps[i];
-+
-+ len = lenEnd;
-+ do
-+ p->opt[len--].price = kInfinityPrice;
-+ while (len >= 2);
-+
-+ for (i = 0; i < LZMA_NUM_REPS; i++)
-+ {
-+ UInt32 repLen = repLens[i];
-+ UInt32 price;
-+ if (repLen < 2)
-+ continue;
-+ price = repMatchPrice + GetPureRepPrice(p, i, p->state, posState);
-+ do
-+ {
-+ UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][repLen - 2];
-+ COptimal *opt = &p->opt[repLen];
-+ if (curAndLenPrice < opt->price)
-+ {
-+ opt->price = curAndLenPrice;
-+ opt->posPrev = 0;
-+ opt->backPrev = i;
-+ opt->prev1IsChar = False;
-+ }
-+ }
-+ while (--repLen >= 2);
-+ }
-+
-+ normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[p->state]);
-+
-+ len = ((repLens[0] >= 2) ? repLens[0] + 1 : 2);
-+ if (len <= mainLen)
-+ {
-+ UInt32 offs = 0;
-+ while (len > matches[offs])
-+ offs += 2;
-+ for (; ; len++)
-+ {
-+ COptimal *opt;
-+ UInt32 distance = matches[offs + 1];
-+
-+ UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN];
-+ UInt32 lenToPosState = GetLenToPosState(len);
-+ if (distance < kNumFullDistances)
-+ curAndLenPrice += p->distancesPrices[lenToPosState][distance];
-+ else
-+ {
-+ UInt32 slot;
-+ GetPosSlot2(distance, slot);
-+ curAndLenPrice += p->alignPrices[distance & kAlignMask] + p->posSlotPrices[lenToPosState][slot];
-+ }
-+ opt = &p->opt[len];
-+ if (curAndLenPrice < opt->price)
-+ {
-+ opt->price = curAndLenPrice;
-+ opt->posPrev = 0;
-+ opt->backPrev = distance + LZMA_NUM_REPS;
-+ opt->prev1IsChar = False;
-+ }
-+ if (len == matches[offs])
-+ {
-+ offs += 2;
-+ if (offs == numPairs)
-+ break;
-+ }
-+ }
-+ }
-+
-+ cur = 0;
-+
-+ #ifdef SHOW_STAT2
-+ if (position >= 0)
-+ {
-+ unsigned i;
-+ printf("\n pos = %4X", position);
-+ for (i = cur; i <= lenEnd; i++)
-+ printf("\nprice[%4X] = %d", position - cur + i, p->opt[i].price);
-+ }
-+ #endif
-+
-+ for (;;)
-+ {
-+ UInt32 numAvailFull, newLen, numPairs, posPrev, state, posState, startLen;
-+ UInt32 curPrice, curAnd1Price, matchPrice, repMatchPrice;
-+ Bool nextIsChar;
-+ Byte curByte, matchByte;
-+ const Byte *data;
-+ COptimal *curOpt;
-+ COptimal *nextOpt;
-+
-+ cur++;
-+ if (cur == lenEnd)
-+ return Backward(p, backRes, cur);
-+
-+ newLen = ReadMatchDistances(p, &numPairs);
-+ if (newLen >= p->numFastBytes)
-+ {
-+ p->numPairs = numPairs;
-+ p->longestMatchLength = newLen;
-+ return Backward(p, backRes, cur);
-+ }
-+ position++;
-+ curOpt = &p->opt[cur];
-+ posPrev = curOpt->posPrev;
-+ if (curOpt->prev1IsChar)
-+ {
-+ posPrev--;
-+ if (curOpt->prev2)
-+ {
-+ state = p->opt[curOpt->posPrev2].state;
-+ if (curOpt->backPrev2 < LZMA_NUM_REPS)
-+ state = kRepNextStates[state];
-+ else
-+ state = kMatchNextStates[state];
-+ }
-+ else
-+ state = p->opt[posPrev].state;
-+ state = kLiteralNextStates[state];
-+ }
-+ else
-+ state = p->opt[posPrev].state;
-+ if (posPrev == cur - 1)
-+ {
-+ if (IsShortRep(curOpt))
-+ state = kShortRepNextStates[state];
-+ else
-+ state = kLiteralNextStates[state];
-+ }
-+ else
-+ {
-+ UInt32 pos;
-+ const COptimal *prevOpt;
-+ if (curOpt->prev1IsChar && curOpt->prev2)
-+ {
-+ posPrev = curOpt->posPrev2;
-+ pos = curOpt->backPrev2;
-+ state = kRepNextStates[state];
-+ }
-+ else
-+ {
-+ pos = curOpt->backPrev;
-+ if (pos < LZMA_NUM_REPS)
-+ state = kRepNextStates[state];
-+ else
-+ state = kMatchNextStates[state];
-+ }
-+ prevOpt = &p->opt[posPrev];
-+ if (pos < LZMA_NUM_REPS)
-+ {
-+ UInt32 i;
-+ reps[0] = prevOpt->backs[pos];
-+ for (i = 1; i <= pos; i++)
-+ reps[i] = prevOpt->backs[i - 1];
-+ for (; i < LZMA_NUM_REPS; i++)
-+ reps[i] = prevOpt->backs[i];
-+ }
-+ else
-+ {
-+ UInt32 i;
-+ reps[0] = (pos - LZMA_NUM_REPS);
-+ for (i = 1; i < LZMA_NUM_REPS; i++)
-+ reps[i] = prevOpt->backs[i - 1];
-+ }
-+ }
-+ curOpt->state = (CState)state;
-+
-+ curOpt->backs[0] = reps[0];
-+ curOpt->backs[1] = reps[1];
-+ curOpt->backs[2] = reps[2];
-+ curOpt->backs[3] = reps[3];
-+
-+ curPrice = curOpt->price;
-+ nextIsChar = False;
-+ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+ curByte = *data;
-+ matchByte = *(data - (reps[0] + 1));
-+
-+ posState = (position & p->pbMask);
-+
-+ curAnd1Price = curPrice + GET_PRICE_0(p->isMatch[state][posState]);
-+ {
-+ const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
-+ curAnd1Price +=
-+ (!IsCharState(state) ?
-+ LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
-+ LitEnc_GetPrice(probs, curByte, p->ProbPrices));
-+ }
-+
-+ nextOpt = &p->opt[cur + 1];
-+
-+ if (curAnd1Price < nextOpt->price)
-+ {
-+ nextOpt->price = curAnd1Price;
-+ nextOpt->posPrev = cur;
-+ MakeAsChar(nextOpt);
-+ nextIsChar = True;
-+ }
-+
-+ matchPrice = curPrice + GET_PRICE_1(p->isMatch[state][posState]);
-+ repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[state]);
-+
-+ if (matchByte == curByte && !(nextOpt->posPrev < cur && nextOpt->backPrev == 0))
-+ {
-+ UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, state, posState);
-+ if (shortRepPrice <= nextOpt->price)
-+ {
-+ nextOpt->price = shortRepPrice;
-+ nextOpt->posPrev = cur;
-+ MakeAsShortRep(nextOpt);
-+ nextIsChar = True;
-+ }
-+ }
-+ numAvailFull = p->numAvail;
-+ {
-+ UInt32 temp = kNumOpts - 1 - cur;
-+ if (temp < numAvailFull)
-+ numAvailFull = temp;
-+ }
-+
-+ if (numAvailFull < 2)
-+ continue;
-+ numAvail = (numAvailFull <= p->numFastBytes ? numAvailFull : p->numFastBytes);
-+
-+ if (!nextIsChar && matchByte != curByte) /* speed optimization */
-+ {
-+ /* try Literal + rep0 */
-+ UInt32 temp;
-+ UInt32 lenTest2;
-+ const Byte *data2 = data - (reps[0] + 1);
-+ UInt32 limit = p->numFastBytes + 1;
-+ if (limit > numAvailFull)
-+ limit = numAvailFull;
-+
-+ for (temp = 1; temp < limit && data[temp] == data2[temp]; temp++);
-+ lenTest2 = temp - 1;
-+ if (lenTest2 >= 2)
-+ {
-+ UInt32 state2 = kLiteralNextStates[state];
-+ UInt32 posStateNext = (position + 1) & p->pbMask;
-+ UInt32 nextRepMatchPrice = curAnd1Price +
-+ GET_PRICE_1(p->isMatch[state2][posStateNext]) +
-+ GET_PRICE_1(p->isRep[state2]);
-+ /* for (; lenTest2 >= 2; lenTest2--) */
-+ {
-+ UInt32 curAndLenPrice;
-+ COptimal *opt;
-+ UInt32 offset = cur + 1 + lenTest2;
-+ while (lenEnd < offset)
-+ p->opt[++lenEnd].price = kInfinityPrice;
-+ curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
-+ opt = &p->opt[offset];
-+ if (curAndLenPrice < opt->price)
-+ {
-+ opt->price = curAndLenPrice;
-+ opt->posPrev = cur + 1;
-+ opt->backPrev = 0;
-+ opt->prev1IsChar = True;
-+ opt->prev2 = False;
-+ }
-+ }
-+ }
-+ }
-+
-+ startLen = 2; /* speed optimization */
-+ {
-+ UInt32 repIndex;
-+ for (repIndex = 0; repIndex < LZMA_NUM_REPS; repIndex++)
-+ {
-+ UInt32 lenTest;
-+ UInt32 lenTestTemp;
-+ UInt32 price;
-+ const Byte *data2 = data - (reps[repIndex] + 1);
-+ if (data[0] != data2[0] || data[1] != data2[1])
-+ continue;
-+ for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
-+ while (lenEnd < cur + lenTest)
-+ p->opt[++lenEnd].price = kInfinityPrice;
-+ lenTestTemp = lenTest;
-+ price = repMatchPrice + GetPureRepPrice(p, repIndex, state, posState);
-+ do
-+ {
-+ UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][lenTest - 2];
-+ COptimal *opt = &p->opt[cur + lenTest];
-+ if (curAndLenPrice < opt->price)
-+ {
-+ opt->price = curAndLenPrice;
-+ opt->posPrev = cur;
-+ opt->backPrev = repIndex;
-+ opt->prev1IsChar = False;
-+ }
-+ }
-+ while (--lenTest >= 2);
-+ lenTest = lenTestTemp;
-+
-+ if (repIndex == 0)
-+ startLen = lenTest + 1;
-+
-+ /* if (_maxMode) */
-+ {
-+ UInt32 lenTest2 = lenTest + 1;
-+ UInt32 limit = lenTest2 + p->numFastBytes;
-+ UInt32 nextRepMatchPrice;
-+ if (limit > numAvailFull)
-+ limit = numAvailFull;
-+ for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
-+ lenTest2 -= lenTest + 1;
-+ if (lenTest2 >= 2)
-+ {
-+ UInt32 state2 = kRepNextStates[state];
-+ UInt32 posStateNext = (position + lenTest) & p->pbMask;
-+ UInt32 curAndLenCharPrice =
-+ price + p->repLenEnc.prices[posState][lenTest - 2] +
-+ GET_PRICE_0(p->isMatch[state2][posStateNext]) +
-+ LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
-+ data[lenTest], data2[lenTest], p->ProbPrices);
-+ state2 = kLiteralNextStates[state2];
-+ posStateNext = (position + lenTest + 1) & p->pbMask;
-+ nextRepMatchPrice = curAndLenCharPrice +
-+ GET_PRICE_1(p->isMatch[state2][posStateNext]) +
-+ GET_PRICE_1(p->isRep[state2]);
-+
-+ /* for (; lenTest2 >= 2; lenTest2--) */
-+ {
-+ UInt32 curAndLenPrice;
-+ COptimal *opt;
-+ UInt32 offset = cur + lenTest + 1 + lenTest2;
-+ while (lenEnd < offset)
-+ p->opt[++lenEnd].price = kInfinityPrice;
-+ curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
-+ opt = &p->opt[offset];
-+ if (curAndLenPrice < opt->price)
-+ {
-+ opt->price = curAndLenPrice;
-+ opt->posPrev = cur + lenTest + 1;
-+ opt->backPrev = 0;
-+ opt->prev1IsChar = True;
-+ opt->prev2 = True;
-+ opt->posPrev2 = cur;
-+ opt->backPrev2 = repIndex;
-+ }
-+ }
-+ }
-+ }
-+ }
-+ }
-+ /* for (UInt32 lenTest = 2; lenTest <= newLen; lenTest++) */
-+ if (newLen > numAvail)
-+ {
-+ newLen = numAvail;
-+ for (numPairs = 0; newLen > matches[numPairs]; numPairs += 2);
-+ matches[numPairs] = newLen;
-+ numPairs += 2;
-+ }
-+ if (newLen >= startLen)
-+ {
-+ UInt32 normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[state]);
-+ UInt32 offs, curBack, posSlot;
-+ UInt32 lenTest;
-+ while (lenEnd < cur + newLen)
-+ p->opt[++lenEnd].price = kInfinityPrice;
-+
-+ offs = 0;
-+ while (startLen > matches[offs])
-+ offs += 2;
-+ curBack = matches[offs + 1];
-+ GetPosSlot2(curBack, posSlot);
-+ for (lenTest = /*2*/ startLen; ; lenTest++)
-+ {
-+ UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][lenTest - LZMA_MATCH_LEN_MIN];
-+ UInt32 lenToPosState = GetLenToPosState(lenTest);
-+ COptimal *opt;
-+ if (curBack < kNumFullDistances)
-+ curAndLenPrice += p->distancesPrices[lenToPosState][curBack];
-+ else
-+ curAndLenPrice += p->posSlotPrices[lenToPosState][posSlot] + p->alignPrices[curBack & kAlignMask];
-+
-+ opt = &p->opt[cur + lenTest];
-+ if (curAndLenPrice < opt->price)
-+ {
-+ opt->price = curAndLenPrice;
-+ opt->posPrev = cur;
-+ opt->backPrev = curBack + LZMA_NUM_REPS;
-+ opt->prev1IsChar = False;
-+ }
-+
-+ if (/*_maxMode && */lenTest == matches[offs])
-+ {
-+ /* Try Match + Literal + Rep0 */
-+ const Byte *data2 = data - (curBack + 1);
-+ UInt32 lenTest2 = lenTest + 1;
-+ UInt32 limit = lenTest2 + p->numFastBytes;
-+ UInt32 nextRepMatchPrice;
-+ if (limit > numAvailFull)
-+ limit = numAvailFull;
-+ for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
-+ lenTest2 -= lenTest + 1;
-+ if (lenTest2 >= 2)
-+ {
-+ UInt32 state2 = kMatchNextStates[state];
-+ UInt32 posStateNext = (position + lenTest) & p->pbMask;
-+ UInt32 curAndLenCharPrice = curAndLenPrice +
-+ GET_PRICE_0(p->isMatch[state2][posStateNext]) +
-+ LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
-+ data[lenTest], data2[lenTest], p->ProbPrices);
-+ state2 = kLiteralNextStates[state2];
-+ posStateNext = (posStateNext + 1) & p->pbMask;
-+ nextRepMatchPrice = curAndLenCharPrice +
-+ GET_PRICE_1(p->isMatch[state2][posStateNext]) +
-+ GET_PRICE_1(p->isRep[state2]);
-+
-+ /* for (; lenTest2 >= 2; lenTest2--) */
-+ {
-+ UInt32 offset = cur + lenTest + 1 + lenTest2;
-+ UInt32 curAndLenPrice;
-+ COptimal *opt;
-+ while (lenEnd < offset)
-+ p->opt[++lenEnd].price = kInfinityPrice;
-+ curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
-+ opt = &p->opt[offset];
-+ if (curAndLenPrice < opt->price)
-+ {
-+ opt->price = curAndLenPrice;
-+ opt->posPrev = cur + lenTest + 1;
-+ opt->backPrev = 0;
-+ opt->prev1IsChar = True;
-+ opt->prev2 = True;
-+ opt->posPrev2 = cur;
-+ opt->backPrev2 = curBack + LZMA_NUM_REPS;
-+ }
-+ }
-+ }
-+ offs += 2;
-+ if (offs == numPairs)
-+ break;
-+ curBack = matches[offs + 1];
-+ if (curBack >= kNumFullDistances)
-+ GetPosSlot2(curBack, posSlot);
-+ }
-+ }
-+ }
-+ }
-+}
-+
-+#define ChangePair(smallDist, bigDist) (((bigDist) >> 7) > (smallDist))
-+
-+static UInt32 GetOptimumFast(CLzmaEnc *p, UInt32 *backRes)
-+{
-+ UInt32 numAvail, mainLen, mainDist, numPairs, repIndex, repLen, i;
-+ const Byte *data;
-+ const UInt32 *matches;
-+
-+ if (p->additionalOffset == 0)
-+ mainLen = ReadMatchDistances(p, &numPairs);
-+ else
-+ {
-+ mainLen = p->longestMatchLength;
-+ numPairs = p->numPairs;
-+ }
-+
-+ numAvail = p->numAvail;
-+ *backRes = (UInt32)-1;
-+ if (numAvail < 2)
-+ return 1;
-+ if (numAvail > LZMA_MATCH_LEN_MAX)
-+ numAvail = LZMA_MATCH_LEN_MAX;
-+ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+
-+ repLen = repIndex = 0;
-+ for (i = 0; i < LZMA_NUM_REPS; i++)
-+ {
-+ UInt32 len;
-+ const Byte *data2 = data - (p->reps[i] + 1);
-+ if (data[0] != data2[0] || data[1] != data2[1])
-+ continue;
-+ for (len = 2; len < numAvail && data[len] == data2[len]; len++);
-+ if (len >= p->numFastBytes)
-+ {
-+ *backRes = i;
-+ MovePos(p, len - 1);
-+ return len;
-+ }
-+ if (len > repLen)
-+ {
-+ repIndex = i;
-+ repLen = len;
-+ }
-+ }
-+
-+ matches = p->matches;
-+ if (mainLen >= p->numFastBytes)
-+ {
-+ *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
-+ MovePos(p, mainLen - 1);
-+ return mainLen;
-+ }
-+
-+ mainDist = 0; /* for GCC */
-+ if (mainLen >= 2)
-+ {
-+ mainDist = matches[numPairs - 1];
-+ while (numPairs > 2 && mainLen == matches[numPairs - 4] + 1)
-+ {
-+ if (!ChangePair(matches[numPairs - 3], mainDist))
-+ break;
-+ numPairs -= 2;
-+ mainLen = matches[numPairs - 2];
-+ mainDist = matches[numPairs - 1];
-+ }
-+ if (mainLen == 2 && mainDist >= 0x80)
-+ mainLen = 1;
-+ }
-+
-+ if (repLen >= 2 && (
-+ (repLen + 1 >= mainLen) ||
-+ (repLen + 2 >= mainLen && mainDist >= (1 << 9)) ||
-+ (repLen + 3 >= mainLen && mainDist >= (1 << 15))))
-+ {
-+ *backRes = repIndex;
-+ MovePos(p, repLen - 1);
-+ return repLen;
-+ }
-+
-+ if (mainLen < 2 || numAvail <= 2)
-+ return 1;
-+
-+ p->longestMatchLength = ReadMatchDistances(p, &p->numPairs);
-+ if (p->longestMatchLength >= 2)
-+ {
-+ UInt32 newDistance = matches[p->numPairs - 1];
-+ if ((p->longestMatchLength >= mainLen && newDistance < mainDist) ||
-+ (p->longestMatchLength == mainLen + 1 && !ChangePair(mainDist, newDistance)) ||
-+ (p->longestMatchLength > mainLen + 1) ||
-+ (p->longestMatchLength + 1 >= mainLen && mainLen >= 3 && ChangePair(newDistance, mainDist)))
-+ return 1;
-+ }
-+
-+ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+ for (i = 0; i < LZMA_NUM_REPS; i++)
-+ {
-+ UInt32 len, limit;
-+ const Byte *data2 = data - (p->reps[i] + 1);
-+ if (data[0] != data2[0] || data[1] != data2[1])
-+ continue;
-+ limit = mainLen - 1;
-+ for (len = 2; len < limit && data[len] == data2[len]; len++);
-+ if (len >= limit)
-+ return 1;
-+ }
-+ *backRes = mainDist + LZMA_NUM_REPS;
-+ MovePos(p, mainLen - 2);
-+ return mainLen;
-+}
-+
-+static void WriteEndMarker(CLzmaEnc *p, UInt32 posState)
-+{
-+ UInt32 len;
-+ RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
-+ RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
-+ p->state = kMatchNextStates[p->state];
-+ len = LZMA_MATCH_LEN_MIN;
-+ LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
-+ RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, (1 << kNumPosSlotBits) - 1);
-+ RangeEnc_EncodeDirectBits(&p->rc, (((UInt32)1 << 30) - 1) >> kNumAlignBits, 30 - kNumAlignBits);
-+ RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, kAlignMask);
-+}
-+
-+static SRes CheckErrors(CLzmaEnc *p)
-+{
-+ if (p->result != SZ_OK)
-+ return p->result;
-+ if (p->rc.res != SZ_OK)
-+ p->result = SZ_ERROR_WRITE;
-+ if (p->matchFinderBase.result != SZ_OK)
-+ p->result = SZ_ERROR_READ;
-+ if (p->result != SZ_OK)
-+ p->finished = True;
-+ return p->result;
-+}
-+
-+static SRes Flush(CLzmaEnc *p, UInt32 nowPos)
-+{
-+ /* ReleaseMFStream(); */
-+ p->finished = True;
-+ if (p->writeEndMark)
-+ WriteEndMarker(p, nowPos & p->pbMask);
-+ RangeEnc_FlushData(&p->rc);
-+ RangeEnc_FlushStream(&p->rc);
-+ return CheckErrors(p);
-+}
-+
-+static void FillAlignPrices(CLzmaEnc *p)
-+{
-+ UInt32 i;
-+ for (i = 0; i < kAlignTableSize; i++)
-+ p->alignPrices[i] = RcTree_ReverseGetPrice(p->posAlignEncoder, kNumAlignBits, i, p->ProbPrices);
-+ p->alignPriceCount = 0;
-+}
-+
-+static void FillDistancesPrices(CLzmaEnc *p)
-+{
-+ UInt32 tempPrices[kNumFullDistances];
-+ UInt32 i, lenToPosState;
-+ for (i = kStartPosModelIndex; i < kNumFullDistances; i++)
-+ {
-+ UInt32 posSlot = GetPosSlot1(i);
-+ UInt32 footerBits = ((posSlot >> 1) - 1);
-+ UInt32 base = ((2 | (posSlot & 1)) << footerBits);
-+ tempPrices[i] = RcTree_ReverseGetPrice(p->posEncoders + base - posSlot - 1, footerBits, i - base, p->ProbPrices);
-+ }
-+
-+ for (lenToPosState = 0; lenToPosState < kNumLenToPosStates; lenToPosState++)
-+ {
-+ UInt32 posSlot;
-+ const CLzmaProb *encoder = p->posSlotEncoder[lenToPosState];
-+ UInt32 *posSlotPrices = p->posSlotPrices[lenToPosState];
-+ for (posSlot = 0; posSlot < p->distTableSize; posSlot++)
-+ posSlotPrices[posSlot] = RcTree_GetPrice(encoder, kNumPosSlotBits, posSlot, p->ProbPrices);
-+ for (posSlot = kEndPosModelIndex; posSlot < p->distTableSize; posSlot++)
-+ posSlotPrices[posSlot] += ((((posSlot >> 1) - 1) - kNumAlignBits) << kNumBitPriceShiftBits);
-+
-+ {
-+ UInt32 *distancesPrices = p->distancesPrices[lenToPosState];
-+ UInt32 i;
-+ for (i = 0; i < kStartPosModelIndex; i++)
-+ distancesPrices[i] = posSlotPrices[i];
-+ for (; i < kNumFullDistances; i++)
-+ distancesPrices[i] = posSlotPrices[GetPosSlot1(i)] + tempPrices[i];
-+ }
-+ }
-+ p->matchPriceCount = 0;
-+}
-+
-+void LzmaEnc_Construct(CLzmaEnc *p)
-+{
-+ RangeEnc_Construct(&p->rc);
-+ MatchFinder_Construct(&p->matchFinderBase);
-+ #ifndef _7ZIP_ST
-+ MatchFinderMt_Construct(&p->matchFinderMt);
-+ p->matchFinderMt.MatchFinder = &p->matchFinderBase;
-+ #endif
-+
-+ {
-+ CLzmaEncProps props;
-+ LzmaEncProps_Init(&props);
-+ LzmaEnc_SetProps(p, &props);
-+ }
-+
-+ #ifndef LZMA_LOG_BSR
-+ LzmaEnc_FastPosInit(p->g_FastPos);
-+ #endif
-+
-+ LzmaEnc_InitPriceTables(p->ProbPrices);
-+ p->litProbs = 0;
-+ p->saveState.litProbs = 0;
-+}
-+
-+CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc)
-+{
-+ void *p;
-+ p = alloc->Alloc(alloc, sizeof(CLzmaEnc));
-+ if (p != 0)
-+ LzmaEnc_Construct((CLzmaEnc *)p);
-+ return p;
-+}
-+
-+void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
-+{
-+ alloc->Free(alloc, p->litProbs);
-+ alloc->Free(alloc, p->saveState.litProbs);
-+ p->litProbs = 0;
-+ p->saveState.litProbs = 0;
-+}
-+
-+void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+ #ifndef _7ZIP_ST
-+ MatchFinderMt_Destruct(&p->matchFinderMt, allocBig);
-+ #endif
-+ MatchFinder_Free(&p->matchFinderBase, allocBig);
-+ LzmaEnc_FreeLits(p, alloc);
-+ RangeEnc_Free(&p->rc, alloc);
-+}
-+
-+void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+ LzmaEnc_Destruct((CLzmaEnc *)p, alloc, allocBig);
-+ alloc->Free(alloc, p);
-+}
-+
-+static SRes LzmaEnc_CodeOneBlock(CLzmaEnc *p, Bool useLimits, UInt32 maxPackSize, UInt32 maxUnpackSize)
-+{
-+ UInt32 nowPos32, startPos32;
-+ if (p->needInit)
-+ {
-+ p->matchFinder.Init(p->matchFinderObj);
-+ p->needInit = 0;
-+ }
-+
-+ if (p->finished)
-+ return p->result;
-+ RINOK(CheckErrors(p));
-+
-+ nowPos32 = (UInt32)p->nowPos64;
-+ startPos32 = nowPos32;
-+
-+ if (p->nowPos64 == 0)
-+ {
-+ UInt32 numPairs;
-+ Byte curByte;
-+ if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
-+ return Flush(p, nowPos32);
-+ ReadMatchDistances(p, &numPairs);
-+ RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][0], 0);
-+ p->state = kLiteralNextStates[p->state];
-+ curByte = p->matchFinder.GetIndexByte(p->matchFinderObj, 0 - p->additionalOffset);
-+ LitEnc_Encode(&p->rc, p->litProbs, curByte);
-+ p->additionalOffset--;
-+ nowPos32++;
-+ }
-+
-+ if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) != 0)
-+ for (;;)
-+ {
-+ UInt32 pos, len, posState;
-+
-+ if (p->fastMode)
-+ len = GetOptimumFast(p, &pos);
-+ else
-+ len = GetOptimum(p, nowPos32, &pos);
-+
-+ #ifdef SHOW_STAT2
-+ printf("\n pos = %4X, len = %d pos = %d", nowPos32, len, pos);
-+ #endif
-+
-+ posState = nowPos32 & p->pbMask;
-+ if (len == 1 && pos == (UInt32)-1)
-+ {
-+ Byte curByte;
-+ CLzmaProb *probs;
-+ const Byte *data;
-+
-+ RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 0);
-+ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
-+ curByte = *data;
-+ probs = LIT_PROBS(nowPos32, *(data - 1));
-+ if (IsCharState(p->state))
-+ LitEnc_Encode(&p->rc, probs, curByte);
-+ else
-+ LitEnc_EncodeMatched(&p->rc, probs, curByte, *(data - p->reps[0] - 1));
-+ p->state = kLiteralNextStates[p->state];
-+ }
-+ else
-+ {
-+ RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
-+ if (pos < LZMA_NUM_REPS)
-+ {
-+ RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 1);
-+ if (pos == 0)
-+ {
-+ RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 0);
-+ RangeEnc_EncodeBit(&p->rc, &p->isRep0Long[p->state][posState], ((len == 1) ? 0 : 1));
-+ }
-+ else
-+ {
-+ UInt32 distance = p->reps[pos];
-+ RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 1);
-+ if (pos == 1)
-+ RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 0);
-+ else
-+ {
-+ RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 1);
-+ RangeEnc_EncodeBit(&p->rc, &p->isRepG2[p->state], pos - 2);
-+ if (pos == 3)
-+ p->reps[3] = p->reps[2];
-+ p->reps[2] = p->reps[1];
-+ }
-+ p->reps[1] = p->reps[0];
-+ p->reps[0] = distance;
-+ }
-+ if (len == 1)
-+ p->state = kShortRepNextStates[p->state];
-+ else
-+ {
-+ LenEnc_Encode2(&p->repLenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
-+ p->state = kRepNextStates[p->state];
-+ }
-+ }
-+ else
-+ {
-+ UInt32 posSlot;
-+ RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
-+ p->state = kMatchNextStates[p->state];
-+ LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
-+ pos -= LZMA_NUM_REPS;
-+ GetPosSlot(pos, posSlot);
-+ RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, posSlot);
-+
-+ if (posSlot >= kStartPosModelIndex)
-+ {
-+ UInt32 footerBits = ((posSlot >> 1) - 1);
-+ UInt32 base = ((2 | (posSlot & 1)) << footerBits);
-+ UInt32 posReduced = pos - base;
-+
-+ if (posSlot < kEndPosModelIndex)
-+ RcTree_ReverseEncode(&p->rc, p->posEncoders + base - posSlot - 1, footerBits, posReduced);
-+ else
-+ {
-+ RangeEnc_EncodeDirectBits(&p->rc, posReduced >> kNumAlignBits, footerBits - kNumAlignBits);
-+ RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, posReduced & kAlignMask);
-+ p->alignPriceCount++;
-+ }
-+ }
-+ p->reps[3] = p->reps[2];
-+ p->reps[2] = p->reps[1];
-+ p->reps[1] = p->reps[0];
-+ p->reps[0] = pos;
-+ p->matchPriceCount++;
-+ }
-+ }
-+ p->additionalOffset -= len;
-+ nowPos32 += len;
-+ if (p->additionalOffset == 0)
-+ {
-+ UInt32 processed;
-+ if (!p->fastMode)
-+ {
-+ if (p->matchPriceCount >= (1 << 7))
-+ FillDistancesPrices(p);
-+ if (p->alignPriceCount >= kAlignTableSize)
-+ FillAlignPrices(p);
-+ }
-+ if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
-+ break;
-+ processed = nowPos32 - startPos32;
-+ if (useLimits)
-+ {
-+ if (processed + kNumOpts + 300 >= maxUnpackSize ||
-+ RangeEnc_GetProcessed(&p->rc) + kNumOpts * 2 >= maxPackSize)
-+ break;
-+ }
-+ else if (processed >= (1 << 15))
-+ {
-+ p->nowPos64 += nowPos32 - startPos32;
-+ return CheckErrors(p);
-+ }
-+ }
-+ }
-+ p->nowPos64 += nowPos32 - startPos32;
-+ return Flush(p, nowPos32);
-+}
-+
-+#define kBigHashDicLimit ((UInt32)1 << 24)
-+
-+static SRes LzmaEnc_Alloc(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+ UInt32 beforeSize = kNumOpts;
-+ Bool btMode;
-+ if (!RangeEnc_Alloc(&p->rc, alloc))
-+ return SZ_ERROR_MEM;
-+ btMode = (p->matchFinderBase.btMode != 0);
-+ #ifndef _7ZIP_ST
-+ p->mtMode = (p->multiThread && !p->fastMode && btMode);
-+ #endif
-+
-+ {
-+ unsigned lclp = p->lc + p->lp;
-+ if (p->litProbs == 0 || p->saveState.litProbs == 0 || p->lclp != lclp)
-+ {
-+ LzmaEnc_FreeLits(p, alloc);
-+ p->litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
-+ p->saveState.litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
-+ if (p->litProbs == 0 || p->saveState.litProbs == 0)
-+ {
-+ LzmaEnc_FreeLits(p, alloc);
-+ return SZ_ERROR_MEM;
-+ }
-+ p->lclp = lclp;
-+ }
-+ }
-+
-+ p->matchFinderBase.bigHash = (p->dictSize > kBigHashDicLimit);
-+
-+ if (beforeSize + p->dictSize < keepWindowSize)
-+ beforeSize = keepWindowSize - p->dictSize;
-+
-+ #ifndef _7ZIP_ST
-+ if (p->mtMode)
-+ {
-+ RINOK(MatchFinderMt_Create(&p->matchFinderMt, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig));
-+ p->matchFinderObj = &p->matchFinderMt;
-+ MatchFinderMt_CreateVTable(&p->matchFinderMt, &p->matchFinder);
-+ }
-+ else
-+ #endif
-+ {
-+ if (!MatchFinder_Create(&p->matchFinderBase, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig))
-+ return SZ_ERROR_MEM;
-+ p->matchFinderObj = &p->matchFinderBase;
-+ MatchFinder_CreateVTable(&p->matchFinderBase, &p->matchFinder);
-+ }
-+ return SZ_OK;
-+}
-+
-+void LzmaEnc_Init(CLzmaEnc *p)
-+{
-+ UInt32 i;
-+ p->state = 0;
-+ for (i = 0 ; i < LZMA_NUM_REPS; i++)
-+ p->reps[i] = 0;
-+
-+ RangeEnc_Init(&p->rc);
-+
-+
-+ for (i = 0; i < kNumStates; i++)
-+ {
-+ UInt32 j;
-+ for (j = 0; j < LZMA_NUM_PB_STATES_MAX; j++)
-+ {
-+ p->isMatch[i][j] = kProbInitValue;
-+ p->isRep0Long[i][j] = kProbInitValue;
-+ }
-+ p->isRep[i] = kProbInitValue;
-+ p->isRepG0[i] = kProbInitValue;
-+ p->isRepG1[i] = kProbInitValue;
-+ p->isRepG2[i] = kProbInitValue;
-+ }
-+
-+ {
-+ UInt32 num = 0x300 << (p->lp + p->lc);
-+ for (i = 0; i < num; i++)
-+ p->litProbs[i] = kProbInitValue;
-+ }
-+
-+ {
-+ for (i = 0; i < kNumLenToPosStates; i++)
-+ {
-+ CLzmaProb *probs = p->posSlotEncoder[i];
-+ UInt32 j;
-+ for (j = 0; j < (1 << kNumPosSlotBits); j++)
-+ probs[j] = kProbInitValue;
-+ }
-+ }
-+ {
-+ for (i = 0; i < kNumFullDistances - kEndPosModelIndex; i++)
-+ p->posEncoders[i] = kProbInitValue;
-+ }
-+
-+ LenEnc_Init(&p->lenEnc.p);
-+ LenEnc_Init(&p->repLenEnc.p);
-+
-+ for (i = 0; i < (1 << kNumAlignBits); i++)
-+ p->posAlignEncoder[i] = kProbInitValue;
-+
-+ p->optimumEndIndex = 0;
-+ p->optimumCurrentIndex = 0;
-+ p->additionalOffset = 0;
-+
-+ p->pbMask = (1 << p->pb) - 1;
-+ p->lpMask = (1 << p->lp) - 1;
-+}
-+
-+void LzmaEnc_InitPrices(CLzmaEnc *p)
-+{
-+ if (!p->fastMode)
-+ {
-+ FillDistancesPrices(p);
-+ FillAlignPrices(p);
-+ }
-+
-+ p->lenEnc.tableSize =
-+ p->repLenEnc.tableSize =
-+ p->numFastBytes + 1 - LZMA_MATCH_LEN_MIN;
-+ LenPriceEnc_UpdateTables(&p->lenEnc, 1 << p->pb, p->ProbPrices);
-+ LenPriceEnc_UpdateTables(&p->repLenEnc, 1 << p->pb, p->ProbPrices);
-+}
-+
-+static SRes LzmaEnc_AllocAndInit(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+ UInt32 i;
-+ for (i = 0; i < (UInt32)kDicLogSizeMaxCompress; i++)
-+ if (p->dictSize <= ((UInt32)1 << i))
-+ break;
-+ p->distTableSize = i * 2;
-+
-+ p->finished = False;
-+ p->result = SZ_OK;
-+ RINOK(LzmaEnc_Alloc(p, keepWindowSize, alloc, allocBig));
-+ LzmaEnc_Init(p);
-+ LzmaEnc_InitPrices(p);
-+ p->nowPos64 = 0;
-+ return SZ_OK;
-+}
-+
-+static SRes LzmaEnc_Prepare(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream,
-+ ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+ CLzmaEnc *p = (CLzmaEnc *)pp;
-+ p->matchFinderBase.stream = inStream;
-+ p->needInit = 1;
-+ p->rc.outStream = outStream;
-+ return LzmaEnc_AllocAndInit(p, 0, alloc, allocBig);
-+}
-+
-+SRes LzmaEnc_PrepareForLzma2(CLzmaEncHandle pp,
-+ ISeqInStream *inStream, UInt32 keepWindowSize,
-+ ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+ CLzmaEnc *p = (CLzmaEnc *)pp;
-+ p->matchFinderBase.stream = inStream;
-+ p->needInit = 1;
-+ return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
-+}
-+
-+static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen)
-+{
-+ p->matchFinderBase.directInput = 1;
-+ p->matchFinderBase.bufferBase = (Byte *)src;
-+ p->matchFinderBase.directInputRem = srcLen;
-+}
-+
-+SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
-+ UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+ CLzmaEnc *p = (CLzmaEnc *)pp;
-+ LzmaEnc_SetInputBuf(p, src, srcLen);
-+ p->needInit = 1;
-+
-+ return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
-+}
-+
-+void LzmaEnc_Finish(CLzmaEncHandle pp)
-+{
-+ #ifndef _7ZIP_ST
-+ CLzmaEnc *p = (CLzmaEnc *)pp;
-+ if (p->mtMode)
-+ MatchFinderMt_ReleaseStream(&p->matchFinderMt);
-+ #else
-+ pp = pp;
-+ #endif
-+}
-+
-+typedef struct
-+{
-+ ISeqOutStream funcTable;
-+ Byte *data;
-+ SizeT rem;
-+ Bool overflow;
-+} CSeqOutStreamBuf;
-+
-+static size_t MyWrite(void *pp, const void *data, size_t size)
-+{
-+ CSeqOutStreamBuf *p = (CSeqOutStreamBuf *)pp;
-+ if (p->rem < size)
-+ {
-+ size = p->rem;
-+ p->overflow = True;
-+ }
-+ memcpy(p->data, data, size);
-+ p->rem -= size;
-+ p->data += size;
-+ return size;
-+}
-+
-+
-+UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
-+{
-+ const CLzmaEnc *p = (CLzmaEnc *)pp;
-+ return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
-+}
-+
-+const Byte *LzmaEnc_GetCurBuf(CLzmaEncHandle pp)
-+{
-+ const CLzmaEnc *p = (CLzmaEnc *)pp;
-+ return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
-+}
-+
-+SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
-+ Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize)
-+{
-+ CLzmaEnc *p = (CLzmaEnc *)pp;
-+ UInt64 nowPos64;
-+ SRes res;
-+ CSeqOutStreamBuf outStream;
-+
-+ outStream.funcTable.Write = MyWrite;
-+ outStream.data = dest;
-+ outStream.rem = *destLen;
-+ outStream.overflow = False;
-+
-+ p->writeEndMark = False;
-+ p->finished = False;
-+ p->result = SZ_OK;
-+
-+ if (reInit)
-+ LzmaEnc_Init(p);
-+ LzmaEnc_InitPrices(p);
-+ nowPos64 = p->nowPos64;
-+ RangeEnc_Init(&p->rc);
-+ p->rc.outStream = &outStream.funcTable;
-+
-+ res = LzmaEnc_CodeOneBlock(p, True, desiredPackSize, *unpackSize);
-+
-+ *unpackSize = (UInt32)(p->nowPos64 - nowPos64);
-+ *destLen -= outStream.rem;
-+ if (outStream.overflow)
-+ return SZ_ERROR_OUTPUT_EOF;
-+
-+ return res;
-+}
-+
-+static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress)
-+{
-+ SRes res = SZ_OK;
-+
-+ #ifndef _7ZIP_ST
-+ Byte allocaDummy[0x300];
-+ int i = 0;
-+ for (i = 0; i < 16; i++)
-+ allocaDummy[i] = (Byte)i;
-+ #endif
-+
-+ for (;;)
-+ {
-+ res = LzmaEnc_CodeOneBlock(p, False, 0, 0);
-+ if (res != SZ_OK || p->finished != 0)
-+ break;
-+ if (progress != 0)
-+ {
-+ res = progress->Progress(progress, p->nowPos64, RangeEnc_GetProcessed(&p->rc));
-+ if (res != SZ_OK)
-+ {
-+ res = SZ_ERROR_PROGRESS;
-+ break;
-+ }
-+ }
-+ }
-+ LzmaEnc_Finish(p);
-+ return res;
-+}
-+
-+SRes LzmaEnc_Encode(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ICompressProgress *progress,
-+ ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+ RINOK(LzmaEnc_Prepare(pp, outStream, inStream, alloc, allocBig));
-+ return LzmaEnc_Encode2((CLzmaEnc *)pp, progress);
-+}
-+
-+SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size)
-+{
-+ CLzmaEnc *p = (CLzmaEnc *)pp;
-+ int i;
-+ UInt32 dictSize = p->dictSize;
-+ if (*size < LZMA_PROPS_SIZE)
-+ return SZ_ERROR_PARAM;
-+ *size = LZMA_PROPS_SIZE;
-+ props[0] = (Byte)((p->pb * 5 + p->lp) * 9 + p->lc);
-+
-+ for (i = 11; i <= 30; i++)
-+ {
-+ if (dictSize <= ((UInt32)2 << i))
-+ {
-+ dictSize = (2 << i);
-+ break;
-+ }
-+ if (dictSize <= ((UInt32)3 << i))
-+ {
-+ dictSize = (3 << i);
-+ break;
-+ }
-+ }
-+
-+ for (i = 0; i < 4; i++)
-+ props[1 + i] = (Byte)(dictSize >> (8 * i));
-+ return SZ_OK;
-+}
-+
-+SRes LzmaEnc_MemEncode(CLzmaEncHandle pp, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+ int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+ SRes res;
-+ CLzmaEnc *p = (CLzmaEnc *)pp;
-+
-+ CSeqOutStreamBuf outStream;
-+
-+ LzmaEnc_SetInputBuf(p, src, srcLen);
-+
-+ outStream.funcTable.Write = MyWrite;
-+ outStream.data = dest;
-+ outStream.rem = *destLen;
-+ outStream.overflow = False;
-+
-+ p->writeEndMark = writeEndMark;
-+
-+ p->rc.outStream = &outStream.funcTable;
-+ res = LzmaEnc_MemPrepare(pp, src, srcLen, 0, alloc, allocBig);
-+ if (res == SZ_OK)
-+ res = LzmaEnc_Encode2(p, progress);
-+
-+ *destLen -= outStream.rem;
-+ if (outStream.overflow)
-+ return SZ_ERROR_OUTPUT_EOF;
-+ return res;
-+}
-+
-+SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+ const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
-+ ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+ CLzmaEnc *p = (CLzmaEnc *)LzmaEnc_Create(alloc);
-+ SRes res;
-+ if (p == 0)
-+ return SZ_ERROR_MEM;
-+
-+ res = LzmaEnc_SetProps(p, props);
-+ if (res == SZ_OK)
-+ {
-+ res = LzmaEnc_WriteProperties(p, propsEncoded, propsSize);
-+ if (res == SZ_OK)
-+ res = LzmaEnc_MemEncode(p, dest, destLen, src, srcLen,
-+ writeEndMark, progress, alloc, allocBig);
-+ }
-+
-+ LzmaEnc_Destroy(p, alloc, allocBig);
-+ return res;
-+}
---- /dev/null
-+++ b/lib/lzma/Makefile
-@@ -0,0 +1,7 @@
-+lzma_compress-objs := LzFind.o LzmaEnc.o
-+lzma_decompress-objs := LzmaDec.o
-+
-+obj-$(CONFIG_LZMA_COMPRESS) += lzma_compress.o
-+obj-$(CONFIG_LZMA_DECOMPRESS) += lzma_decompress.o
-+
-+EXTRA_CFLAGS += -Iinclude/linux -Iinclude/linux/lzma -include types.h
+++ /dev/null
---- a/include/linux/lzma/LzmaDec.h
-+++ b/include/linux/lzma/LzmaDec.h
-@@ -31,14 +31,6 @@ typedef struct _CLzmaProps
- UInt32 dicSize;
- } CLzmaProps;
-
--/* LzmaProps_Decode - decodes properties
--Returns:
-- SZ_OK
-- SZ_ERROR_UNSUPPORTED - Unsupported properties
--*/
--
--SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
--
-
- /* ---------- LZMA Decoder state ---------- */
-
-@@ -70,8 +62,6 @@ typedef struct
-
- #define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
-
--void LzmaDec_Init(CLzmaDec *p);
--
- /* There are two types of LZMA streams:
- 0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
- 1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
-@@ -108,97 +98,6 @@ typedef enum
-
- /* ELzmaStatus is used only as output value for function call */
-
--
--/* ---------- Interfaces ---------- */
--
--/* There are 3 levels of interfaces:
-- 1) Dictionary Interface
-- 2) Buffer Interface
-- 3) One Call Interface
-- You can select any of these interfaces, but don't mix functions from different
-- groups for same object. */
--
--
--/* There are two variants to allocate state for Dictionary Interface:
-- 1) LzmaDec_Allocate / LzmaDec_Free
-- 2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
-- You can use variant 2, if you set dictionary buffer manually.
-- For Buffer Interface you must always use variant 1.
--
--LzmaDec_Allocate* can return:
-- SZ_OK
-- SZ_ERROR_MEM - Memory allocation error
-- SZ_ERROR_UNSUPPORTED - Unsupported properties
--*/
--
--SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
--void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
--
--SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
--void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
--
--/* ---------- Dictionary Interface ---------- */
--
--/* You can use it, if you want to eliminate the overhead for data copying from
-- dictionary to some other external buffer.
-- You must work with CLzmaDec variables directly in this interface.
--
-- STEPS:
-- LzmaDec_Constr()
-- LzmaDec_Allocate()
-- for (each new stream)
-- {
-- LzmaDec_Init()
-- while (it needs more decompression)
-- {
-- LzmaDec_DecodeToDic()
-- use data from CLzmaDec::dic and update CLzmaDec::dicPos
-- }
-- }
-- LzmaDec_Free()
--*/
--
--/* LzmaDec_DecodeToDic
--
-- The decoding to internal dictionary buffer (CLzmaDec::dic).
-- You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
--
--finishMode:
-- It has meaning only if the decoding reaches output limit (dicLimit).
-- LZMA_FINISH_ANY - Decode just dicLimit bytes.
-- LZMA_FINISH_END - Stream must be finished after dicLimit.
--
--Returns:
-- SZ_OK
-- status:
-- LZMA_STATUS_FINISHED_WITH_MARK
-- LZMA_STATUS_NOT_FINISHED
-- LZMA_STATUS_NEEDS_MORE_INPUT
-- LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
-- SZ_ERROR_DATA - Data error
--*/
--
--SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
-- const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
--
--
--/* ---------- Buffer Interface ---------- */
--
--/* It's zlib-like interface.
-- See LzmaDec_DecodeToDic description for information about STEPS and return results,
-- but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
-- to work with CLzmaDec variables manually.
--
--finishMode:
-- It has meaning only if the decoding reaches output limit (*destLen).
-- LZMA_FINISH_ANY - Decode just destLen bytes.
-- LZMA_FINISH_END - Stream must be finished after (*destLen).
--*/
--
--SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
-- const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
--
--
- /* ---------- One Call Interface ---------- */
-
- /* LzmaDecode
---- a/lib/lzma/LzmaDec.c
-+++ b/lib/lzma/LzmaDec.c
-@@ -682,7 +682,7 @@ static void LzmaDec_InitRc(CLzmaDec *p,
- p->needFlush = 0;
- }
-
--void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
-+static void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
- {
- p->needFlush = 1;
- p->remainLen = 0;
-@@ -698,7 +698,7 @@ void LzmaDec_InitDicAndState(CLzmaDec *p
- p->needInitState = 1;
- }
-
--void LzmaDec_Init(CLzmaDec *p)
-+static void LzmaDec_Init(CLzmaDec *p)
- {
- p->dicPos = 0;
- LzmaDec_InitDicAndState(p, True, True);
-@@ -716,7 +716,7 @@ static void LzmaDec_InitStateReal(CLzmaD
- p->needInitState = 0;
- }
-
--SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
-+static SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
- ELzmaFinishMode finishMode, ELzmaStatus *status)
- {
- SizeT inSize = *srcLen;
-@@ -837,65 +837,13 @@ SRes LzmaDec_DecodeToDic(CLzmaDec *p, Si
- return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
- }
-
--SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
--{
-- SizeT outSize = *destLen;
-- SizeT inSize = *srcLen;
-- *srcLen = *destLen = 0;
-- for (;;)
-- {
-- SizeT inSizeCur = inSize, outSizeCur, dicPos;
-- ELzmaFinishMode curFinishMode;
-- SRes res;
-- if (p->dicPos == p->dicBufSize)
-- p->dicPos = 0;
-- dicPos = p->dicPos;
-- if (outSize > p->dicBufSize - dicPos)
-- {
-- outSizeCur = p->dicBufSize;
-- curFinishMode = LZMA_FINISH_ANY;
-- }
-- else
-- {
-- outSizeCur = dicPos + outSize;
-- curFinishMode = finishMode;
-- }
--
-- res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status);
-- src += inSizeCur;
-- inSize -= inSizeCur;
-- *srcLen += inSizeCur;
-- outSizeCur = p->dicPos - dicPos;
-- memcpy(dest, p->dic + dicPos, outSizeCur);
-- dest += outSizeCur;
-- outSize -= outSizeCur;
-- *destLen += outSizeCur;
-- if (res != 0)
-- return res;
-- if (outSizeCur == 0 || outSize == 0)
-- return SZ_OK;
-- }
--}
--
--void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
-+static void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
- {
- alloc->Free(alloc, p->probs);
- p->probs = 0;
- }
-
--static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc)
--{
-- alloc->Free(alloc, p->dic);
-- p->dic = 0;
--}
--
--void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
--{
-- LzmaDec_FreeProbs(p, alloc);
-- LzmaDec_FreeDict(p, alloc);
--}
--
--SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
-+static SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
- {
- UInt32 dicSize;
- Byte d;
-@@ -935,7 +883,7 @@ static SRes LzmaDec_AllocateProbs2(CLzma
- return SZ_OK;
- }
-
--SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
-+static SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
- {
- CLzmaProps propNew;
- RINOK(LzmaProps_Decode(&propNew, props, propsSize));
-@@ -943,28 +891,6 @@ SRes LzmaDec_AllocateProbs(CLzmaDec *p,
- p->prop = propNew;
- return SZ_OK;
- }
--
--SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
--{
-- CLzmaProps propNew;
-- SizeT dicBufSize;
-- RINOK(LzmaProps_Decode(&propNew, props, propsSize));
-- RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
-- dicBufSize = propNew.dicSize;
-- if (p->dic == 0 || dicBufSize != p->dicBufSize)
-- {
-- LzmaDec_FreeDict(p, alloc);
-- p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize);
-- if (p->dic == 0)
-- {
-- LzmaDec_FreeProbs(p, alloc);
-- return SZ_ERROR_MEM;
-- }
-- }
-- p->dicBufSize = dicBufSize;
-- p->prop = propNew;
-- return SZ_OK;
--}
-
- SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
- const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
---- a/include/linux/lzma/LzmaEnc.h
-+++ b/include/linux/lzma/LzmaEnc.h
-@@ -31,9 +31,6 @@ typedef struct _CLzmaEncProps
- } CLzmaEncProps;
-
- void LzmaEncProps_Init(CLzmaEncProps *p);
--void LzmaEncProps_Normalize(CLzmaEncProps *p);
--UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2);
--
-
- /* ---------- CLzmaEncHandle Interface ---------- */
-
-@@ -53,26 +50,9 @@ CLzmaEncHandle LzmaEnc_Create(ISzAlloc *
- void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig);
- SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props);
- SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size);
--SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream,
-- ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
- SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
- int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-
--/* ---------- One Call Interface ---------- */
--
--/* LzmaEncode
--Return code:
-- SZ_OK - OK
-- SZ_ERROR_MEM - Memory allocation error
-- SZ_ERROR_PARAM - Incorrect paramater
-- SZ_ERROR_OUTPUT_EOF - output buffer overflow
-- SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version)
--*/
--
--SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-- const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
-- ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
--
- #ifdef __cplusplus
- }
- #endif
---- a/lib/lzma/LzmaEnc.c
-+++ b/lib/lzma/LzmaEnc.c
-@@ -53,7 +53,7 @@ void LzmaEncProps_Init(CLzmaEncProps *p)
- p->writeEndMark = 0;
- }
-
--void LzmaEncProps_Normalize(CLzmaEncProps *p)
-+static void LzmaEncProps_Normalize(CLzmaEncProps *p)
- {
- int level = p->level;
- if (level < 0) level = 5;
-@@ -76,7 +76,7 @@ void LzmaEncProps_Normalize(CLzmaEncProp
- #endif
- }
-
--UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
-+static UInt32 __maybe_unused LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
- {
- CLzmaEncProps props = *props2;
- LzmaEncProps_Normalize(&props);
-@@ -93,7 +93,7 @@ UInt32 LzmaEncProps_GetDictSize(const CL
-
- #define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); }
-
--UInt32 GetPosSlot1(UInt32 pos)
-+static UInt32 GetPosSlot1(UInt32 pos)
- {
- UInt32 res;
- BSR2_RET(pos, res);
-@@ -107,7 +107,7 @@ UInt32 GetPosSlot1(UInt32 pos)
- #define kNumLogBits (9 + (int)sizeof(size_t) / 2)
- #define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7)
-
--void LzmaEnc_FastPosInit(Byte *g_FastPos)
-+static void LzmaEnc_FastPosInit(Byte *g_FastPos)
- {
- int c = 2, slotFast;
- g_FastPos[0] = 0;
-@@ -339,58 +339,6 @@ typedef struct
- CSaveState saveState;
- } CLzmaEnc;
-
--void LzmaEnc_SaveState(CLzmaEncHandle pp)
--{
-- CLzmaEnc *p = (CLzmaEnc *)pp;
-- CSaveState *dest = &p->saveState;
-- int i;
-- dest->lenEnc = p->lenEnc;
-- dest->repLenEnc = p->repLenEnc;
-- dest->state = p->state;
--
-- for (i = 0; i < kNumStates; i++)
-- {
-- memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
-- memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
-- }
-- for (i = 0; i < kNumLenToPosStates; i++)
-- memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
-- memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
-- memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
-- memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
-- memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
-- memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
-- memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
-- memcpy(dest->reps, p->reps, sizeof(p->reps));
-- memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb));
--}
--
--void LzmaEnc_RestoreState(CLzmaEncHandle pp)
--{
-- CLzmaEnc *dest = (CLzmaEnc *)pp;
-- const CSaveState *p = &dest->saveState;
-- int i;
-- dest->lenEnc = p->lenEnc;
-- dest->repLenEnc = p->repLenEnc;
-- dest->state = p->state;
--
-- for (i = 0; i < kNumStates; i++)
-- {
-- memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
-- memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
-- }
-- for (i = 0; i < kNumLenToPosStates; i++)
-- memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
-- memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
-- memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
-- memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
-- memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
-- memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
-- memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
-- memcpy(dest->reps, p->reps, sizeof(p->reps));
-- memcpy(dest->litProbs, p->litProbs, (0x300 << dest->lclp) * sizeof(CLzmaProb));
--}
--
- SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2)
- {
- CLzmaEnc *p = (CLzmaEnc *)pp;
-@@ -600,7 +548,7 @@ static void LitEnc_EncodeMatched(CRangeE
- while (symbol < 0x10000);
- }
-
--void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
-+static void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
- {
- UInt32 i;
- for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits))
-@@ -1676,7 +1624,7 @@ static void FillDistancesPrices(CLzmaEnc
- p->matchPriceCount = 0;
- }
-
--void LzmaEnc_Construct(CLzmaEnc *p)
-+static void LzmaEnc_Construct(CLzmaEnc *p)
- {
- RangeEnc_Construct(&p->rc);
- MatchFinder_Construct(&p->matchFinderBase);
-@@ -1709,7 +1657,7 @@ CLzmaEncHandle LzmaEnc_Create(ISzAlloc *
- return p;
- }
-
--void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
-+static void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
- {
- alloc->Free(alloc, p->litProbs);
- alloc->Free(alloc, p->saveState.litProbs);
-@@ -1717,7 +1665,7 @@ void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAl
- p->saveState.litProbs = 0;
- }
-
--void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
-+static void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
- {
- #ifndef _7ZIP_ST
- MatchFinderMt_Destruct(&p->matchFinderMt, allocBig);
-@@ -1947,7 +1895,7 @@ static SRes LzmaEnc_Alloc(CLzmaEnc *p, U
- return SZ_OK;
- }
-
--void LzmaEnc_Init(CLzmaEnc *p)
-+static void LzmaEnc_Init(CLzmaEnc *p)
- {
- UInt32 i;
- p->state = 0;
-@@ -2005,7 +1953,7 @@ void LzmaEnc_Init(CLzmaEnc *p)
- p->lpMask = (1 << p->lp) - 1;
- }
-
--void LzmaEnc_InitPrices(CLzmaEnc *p)
-+static void LzmaEnc_InitPrices(CLzmaEnc *p)
- {
- if (!p->fastMode)
- {
-@@ -2037,26 +1985,6 @@ static SRes LzmaEnc_AllocAndInit(CLzmaEn
- return SZ_OK;
- }
-
--static SRes LzmaEnc_Prepare(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream,
-- ISzAlloc *alloc, ISzAlloc *allocBig)
--{
-- CLzmaEnc *p = (CLzmaEnc *)pp;
-- p->matchFinderBase.stream = inStream;
-- p->needInit = 1;
-- p->rc.outStream = outStream;
-- return LzmaEnc_AllocAndInit(p, 0, alloc, allocBig);
--}
--
--SRes LzmaEnc_PrepareForLzma2(CLzmaEncHandle pp,
-- ISeqInStream *inStream, UInt32 keepWindowSize,
-- ISzAlloc *alloc, ISzAlloc *allocBig)
--{
-- CLzmaEnc *p = (CLzmaEnc *)pp;
-- p->matchFinderBase.stream = inStream;
-- p->needInit = 1;
-- return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
--}
--
- static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen)
- {
- p->matchFinderBase.directInput = 1;
-@@ -2064,7 +1992,7 @@ static void LzmaEnc_SetInputBuf(CLzmaEnc
- p->matchFinderBase.directInputRem = srcLen;
- }
-
--SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
-+static SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
- UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
- {
- CLzmaEnc *p = (CLzmaEnc *)pp;
-@@ -2074,7 +2002,7 @@ SRes LzmaEnc_MemPrepare(CLzmaEncHandle p
- return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
- }
-
--void LzmaEnc_Finish(CLzmaEncHandle pp)
-+static void LzmaEnc_Finish(CLzmaEncHandle pp)
- {
- #ifndef _7ZIP_ST
- CLzmaEnc *p = (CLzmaEnc *)pp;
-@@ -2107,53 +2035,6 @@ static size_t MyWrite(void *pp, const vo
- return size;
- }
-
--
--UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
--{
-- const CLzmaEnc *p = (CLzmaEnc *)pp;
-- return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
--}
--
--const Byte *LzmaEnc_GetCurBuf(CLzmaEncHandle pp)
--{
-- const CLzmaEnc *p = (CLzmaEnc *)pp;
-- return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
--}
--
--SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
-- Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize)
--{
-- CLzmaEnc *p = (CLzmaEnc *)pp;
-- UInt64 nowPos64;
-- SRes res;
-- CSeqOutStreamBuf outStream;
--
-- outStream.funcTable.Write = MyWrite;
-- outStream.data = dest;
-- outStream.rem = *destLen;
-- outStream.overflow = False;
--
-- p->writeEndMark = False;
-- p->finished = False;
-- p->result = SZ_OK;
--
-- if (reInit)
-- LzmaEnc_Init(p);
-- LzmaEnc_InitPrices(p);
-- nowPos64 = p->nowPos64;
-- RangeEnc_Init(&p->rc);
-- p->rc.outStream = &outStream.funcTable;
--
-- res = LzmaEnc_CodeOneBlock(p, True, desiredPackSize, *unpackSize);
--
-- *unpackSize = (UInt32)(p->nowPos64 - nowPos64);
-- *destLen -= outStream.rem;
-- if (outStream.overflow)
-- return SZ_ERROR_OUTPUT_EOF;
--
-- return res;
--}
--
- static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress)
- {
- SRes res = SZ_OK;
-@@ -2184,13 +2065,6 @@ static SRes LzmaEnc_Encode2(CLzmaEnc *p,
- return res;
- }
-
--SRes LzmaEnc_Encode(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ICompressProgress *progress,
-- ISzAlloc *alloc, ISzAlloc *allocBig)
--{
-- RINOK(LzmaEnc_Prepare(pp, outStream, inStream, alloc, allocBig));
-- return LzmaEnc_Encode2((CLzmaEnc *)pp, progress);
--}
--
- SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size)
- {
- CLzmaEnc *p = (CLzmaEnc *)pp;
-@@ -2247,25 +2121,3 @@ SRes LzmaEnc_MemEncode(CLzmaEncHandle pp
- return SZ_ERROR_OUTPUT_EOF;
- return res;
- }
--
--SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-- const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
-- ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
--{
-- CLzmaEnc *p = (CLzmaEnc *)LzmaEnc_Create(alloc);
-- SRes res;
-- if (p == 0)
-- return SZ_ERROR_MEM;
--
-- res = LzmaEnc_SetProps(p, props);
-- if (res == SZ_OK)
-- {
-- res = LzmaEnc_WriteProperties(p, propsEncoded, propsSize);
-- if (res == SZ_OK)
-- res = LzmaEnc_MemEncode(p, dest, destLen, src, srcLen,
-- writeEndMark, progress, alloc, allocBig);
-- }
--
-- LzmaEnc_Destroy(p, alloc, allocBig);
-- return res;
--}
---- a/include/linux/lzma/LzFind.h
-+++ b/include/linux/lzma/LzFind.h
-@@ -55,11 +55,6 @@ typedef struct _CMatchFinder
-
- #define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos)
-
--int MatchFinder_NeedMove(CMatchFinder *p);
--Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p);
--void MatchFinder_MoveBlock(CMatchFinder *p);
--void MatchFinder_ReadIfRequired(CMatchFinder *p);
--
- void MatchFinder_Construct(CMatchFinder *p);
-
- /* Conditions:
-@@ -70,12 +65,6 @@ int MatchFinder_Create(CMatchFinder *p,
- UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
- ISzAlloc *alloc);
- void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
--void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems);
--void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue);
--
--UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son,
-- UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue,
-- UInt32 *distances, UInt32 maxLen);
-
- /*
- Conditions:
-@@ -102,12 +91,6 @@ typedef struct _IMatchFinder
-
- void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable);
-
--void MatchFinder_Init(CMatchFinder *p);
--UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
--UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
--void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
--void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
--
- #ifdef __cplusplus
- }
- #endif
---- a/lib/lzma/LzFind.c
-+++ b/lib/lzma/LzFind.c
-@@ -14,9 +14,15 @@
-
- #define kStartMaxLen 3
-
-+#if 0
-+#define DIRECT_INPUT p->directInput
-+#else
-+#define DIRECT_INPUT 1
-+#endif
-+
- static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc)
- {
-- if (!p->directInput)
-+ if (!DIRECT_INPUT)
- {
- alloc->Free(alloc, p->bufferBase);
- p->bufferBase = 0;
-@@ -28,7 +34,7 @@ static void LzInWindow_Free(CMatchFinder
- static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc)
- {
- UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv;
-- if (p->directInput)
-+ if (DIRECT_INPUT)
- {
- p->blockSize = blockSize;
- return 1;
-@@ -42,12 +48,12 @@ static int LzInWindow_Create(CMatchFinde
- return (p->bufferBase != 0);
- }
-
--Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
--Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
-+static Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
-+static Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
-
--UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
-+static UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
-
--void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
-+static void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
- {
- p->posLimit -= subValue;
- p->pos -= subValue;
-@@ -58,7 +64,7 @@ static void MatchFinder_ReadBlock(CMatch
- {
- if (p->streamEndWasReached || p->result != SZ_OK)
- return;
-- if (p->directInput)
-+ if (DIRECT_INPUT)
- {
- UInt32 curSize = 0xFFFFFFFF - p->streamPos;
- if (curSize > p->directInputRem)
-@@ -89,7 +95,7 @@ static void MatchFinder_ReadBlock(CMatch
- }
- }
-
--void MatchFinder_MoveBlock(CMatchFinder *p)
-+static void MatchFinder_MoveBlock(CMatchFinder *p)
- {
- memmove(p->bufferBase,
- p->buffer - p->keepSizeBefore,
-@@ -97,22 +103,14 @@ void MatchFinder_MoveBlock(CMatchFinder
- p->buffer = p->bufferBase + p->keepSizeBefore;
- }
-
--int MatchFinder_NeedMove(CMatchFinder *p)
-+static int MatchFinder_NeedMove(CMatchFinder *p)
- {
-- if (p->directInput)
-+ if (DIRECT_INPUT)
- return 0;
- /* if (p->streamEndWasReached) return 0; */
- return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter);
- }
-
--void MatchFinder_ReadIfRequired(CMatchFinder *p)
--{
-- if (p->streamEndWasReached)
-- return;
-- if (p->keepSizeAfter >= p->streamPos - p->pos)
-- MatchFinder_ReadBlock(p);
--}
--
- static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p)
- {
- if (MatchFinder_NeedMove(p))
-@@ -268,7 +266,7 @@ static void MatchFinder_SetLimits(CMatch
- p->posLimit = p->pos + limit;
- }
-
--void MatchFinder_Init(CMatchFinder *p)
-+static void MatchFinder_Init(CMatchFinder *p)
- {
- UInt32 i;
- for (i = 0; i < p->hashSizeSum; i++)
-@@ -287,7 +285,7 @@ static UInt32 MatchFinder_GetSubValue(CM
- return (p->pos - p->historySize - 1) & kNormalizeMask;
- }
-
--void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
-+static void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
- {
- UInt32 i;
- for (i = 0; i < numItems; i++)
-@@ -319,38 +317,7 @@ static void MatchFinder_CheckLimits(CMat
- MatchFinder_SetLimits(p);
- }
-
--static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-- UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
-- UInt32 *distances, UInt32 maxLen)
--{
-- son[_cyclicBufferPos] = curMatch;
-- for (;;)
-- {
-- UInt32 delta = pos - curMatch;
-- if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-- return distances;
-- {
-- const Byte *pb = cur - delta;
-- curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)];
-- if (pb[maxLen] == cur[maxLen] && *pb == *cur)
-- {
-- UInt32 len = 0;
-- while (++len != lenLimit)
-- if (pb[len] != cur[len])
-- break;
-- if (maxLen < len)
-- {
-- *distances++ = maxLen = len;
-- *distances++ = delta - 1;
-- if (len == lenLimit)
-- return distances;
-- }
-- }
-- }
-- }
--}
--
--UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+static UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
- UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
- UInt32 *distances, UInt32 maxLen)
- {
-@@ -460,10 +427,10 @@ static void SkipMatchesSpec(UInt32 lenLi
- p->buffer++; \
- if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p);
-
--#define MOVE_POS_RET MOVE_POS return offset;
--
- static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; }
-
-+#define MOVE_POS_RET MatchFinder_MovePos(p); return offset;
-+
- #define GET_MATCHES_HEADER2(minLen, ret_op) \
- UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \
- lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \
-@@ -479,62 +446,7 @@ static void MatchFinder_MovePos(CMatchFi
- distances + offset, maxLen) - distances); MOVE_POS_RET;
-
- #define SKIP_FOOTER \
-- SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS;
--
--static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
-- UInt32 offset;
-- GET_MATCHES_HEADER(2)
-- HASH2_CALC;
-- curMatch = p->hash[hashValue];
-- p->hash[hashValue] = p->pos;
-- offset = 0;
-- GET_MATCHES_FOOTER(offset, 1)
--}
--
--UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
-- UInt32 offset;
-- GET_MATCHES_HEADER(3)
-- HASH_ZIP_CALC;
-- curMatch = p->hash[hashValue];
-- p->hash[hashValue] = p->pos;
-- offset = 0;
-- GET_MATCHES_FOOTER(offset, 2)
--}
--
--static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
-- UInt32 hash2Value, delta2, maxLen, offset;
-- GET_MATCHES_HEADER(3)
--
-- HASH3_CALC;
--
-- delta2 = p->pos - p->hash[hash2Value];
-- curMatch = p->hash[kFix3HashSize + hashValue];
--
-- p->hash[hash2Value] =
-- p->hash[kFix3HashSize + hashValue] = p->pos;
--
--
-- maxLen = 2;
-- offset = 0;
-- if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-- {
-- for (; maxLen != lenLimit; maxLen++)
-- if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-- break;
-- distances[0] = maxLen;
-- distances[1] = delta2 - 1;
-- offset = 2;
-- if (maxLen == lenLimit)
-- {
-- SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
-- MOVE_POS_RET;
-- }
-- }
-- GET_MATCHES_FOOTER(offset, maxLen)
--}
-+ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MatchFinder_MovePos(p);
-
- static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
- {
-@@ -583,108 +495,6 @@ static UInt32 Bt4_MatchFinder_GetMatches
- GET_MATCHES_FOOTER(offset, maxLen)
- }
-
--static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
-- UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
-- GET_MATCHES_HEADER(4)
--
-- HASH4_CALC;
--
-- delta2 = p->pos - p->hash[ hash2Value];
-- delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
-- curMatch = p->hash[kFix4HashSize + hashValue];
--
-- p->hash[ hash2Value] =
-- p->hash[kFix3HashSize + hash3Value] =
-- p->hash[kFix4HashSize + hashValue] = p->pos;
--
-- maxLen = 1;
-- offset = 0;
-- if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-- {
-- distances[0] = maxLen = 2;
-- distances[1] = delta2 - 1;
-- offset = 2;
-- }
-- if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
-- {
-- maxLen = 3;
-- distances[offset + 1] = delta3 - 1;
-- offset += 2;
-- delta2 = delta3;
-- }
-- if (offset != 0)
-- {
-- for (; maxLen != lenLimit; maxLen++)
-- if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-- break;
-- distances[offset - 2] = maxLen;
-- if (maxLen == lenLimit)
-- {
-- p->son[p->cyclicBufferPos] = curMatch;
-- MOVE_POS_RET;
-- }
-- }
-- if (maxLen < 3)
-- maxLen = 3;
-- offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
-- distances + offset, maxLen) - (distances));
-- MOVE_POS_RET
--}
--
--UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
-- UInt32 offset;
-- GET_MATCHES_HEADER(3)
-- HASH_ZIP_CALC;
-- curMatch = p->hash[hashValue];
-- p->hash[hashValue] = p->pos;
-- offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
-- distances, 2) - (distances));
-- MOVE_POS_RET
--}
--
--static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
-- do
-- {
-- SKIP_HEADER(2)
-- HASH2_CALC;
-- curMatch = p->hash[hashValue];
-- p->hash[hashValue] = p->pos;
-- SKIP_FOOTER
-- }
-- while (--num != 0);
--}
--
--void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
-- do
-- {
-- SKIP_HEADER(3)
-- HASH_ZIP_CALC;
-- curMatch = p->hash[hashValue];
-- p->hash[hashValue] = p->pos;
-- SKIP_FOOTER
-- }
-- while (--num != 0);
--}
--
--static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
-- do
-- {
-- UInt32 hash2Value;
-- SKIP_HEADER(3)
-- HASH3_CALC;
-- curMatch = p->hash[kFix3HashSize + hashValue];
-- p->hash[hash2Value] =
-- p->hash[kFix3HashSize + hashValue] = p->pos;
-- SKIP_FOOTER
-- }
-- while (--num != 0);
--}
--
- static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
- {
- do
-@@ -701,61 +511,12 @@ static void Bt4_MatchFinder_Skip(CMatchF
- while (--num != 0);
- }
-
--static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
-- do
-- {
-- UInt32 hash2Value, hash3Value;
-- SKIP_HEADER(4)
-- HASH4_CALC;
-- curMatch = p->hash[kFix4HashSize + hashValue];
-- p->hash[ hash2Value] =
-- p->hash[kFix3HashSize + hash3Value] =
-- p->hash[kFix4HashSize + hashValue] = p->pos;
-- p->son[p->cyclicBufferPos] = curMatch;
-- MOVE_POS
-- }
-- while (--num != 0);
--}
--
--void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
-- do
-- {
-- SKIP_HEADER(3)
-- HASH_ZIP_CALC;
-- curMatch = p->hash[hashValue];
-- p->hash[hashValue] = p->pos;
-- p->son[p->cyclicBufferPos] = curMatch;
-- MOVE_POS
-- }
-- while (--num != 0);
--}
--
- void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable)
- {
- vTable->Init = (Mf_Init_Func)MatchFinder_Init;
- vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte;
- vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes;
- vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos;
-- if (!p->btMode)
-- {
-- vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches;
-- vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip;
-- }
-- else if (p->numHashBytes == 2)
-- {
-- vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches;
-- vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip;
-- }
-- else if (p->numHashBytes == 3)
-- {
-- vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches;
-- vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip;
-- }
-- else
-- {
-- vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
-- vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
-- }
-+ vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
-+ vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
- }
+++ /dev/null
---- a/fs/jffs2/build.c
-+++ b/fs/jffs2/build.c
-@@ -116,6 +116,16 @@ static int jffs2_build_filesystem(struct
- dbg_fsbuild("scanned flash completely\n");
- jffs2_dbg_dump_block_lists_nolock(c);
-
-+ if (c->flags & (1 << 7)) {
-+ printk("%s(): unlocking the mtd device... ", __func__);
-+ mtd_unlock(c->mtd, 0, c->mtd->size);
-+ printk("done.\n");
-+
-+ printk("%s(): erasing all blocks after the end marker... ", __func__);
-+ jffs2_erase_pending_blocks(c, -1);
-+ printk("done.\n");
-+ }
-+
- dbg_fsbuild("pass 1 starting\n");
- c->flags |= JFFS2_SB_FLAG_BUILDING;
- /* Now scan the directory tree, increasing nlink according to every dirent found. */
---- a/fs/jffs2/scan.c
-+++ b/fs/jffs2/scan.c
-@@ -148,8 +148,14 @@ int jffs2_scan_medium(struct jffs2_sb_in
- /* reset summary info for next eraseblock scan */
- jffs2_sum_reset_collected(s);
-
-- ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
-- buf_size, s);
-+ if (c->flags & (1 << 7)) {
-+ if (mtd_block_isbad(c->mtd, jeb->offset))
-+ ret = BLK_STATE_BADBLOCK;
-+ else
-+ ret = BLK_STATE_ALLFF;
-+ } else
-+ ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
-+ buf_size, s);
-
- if (ret < 0)
- goto out;
-@@ -561,6 +567,17 @@ full_scan:
- return err;
- }
-
-+ if ((buf[0] == 0xde) &&
-+ (buf[1] == 0xad) &&
-+ (buf[2] == 0xc0) &&
-+ (buf[3] == 0xde)) {
-+ /* end of filesystem. erase everything after this point */
-+ printk("%s(): End of filesystem marker found at 0x%x\n", __func__, jeb->offset);
-+ c->flags |= (1 << 7);
-+
-+ return BLK_STATE_ALLFF;
-+ }
-+
- /* We temporarily use 'ofs' as a pointer into the buffer/jeb */
- ofs = 0;
- max_ofs = EMPTY_SCAN_SIZE(c->sector_size);
+++ /dev/null
---- a/fs/ubifs/file.c
-+++ b/fs/ubifs/file.c
-@@ -1597,6 +1597,10 @@ const struct inode_operations ubifs_syml
- .follow_link = ubifs_follow_link,
- .setattr = ubifs_setattr,
- .getattr = ubifs_getattr,
-+ .setxattr = ubifs_setxattr,
-+ .getxattr = ubifs_getxattr,
-+ .listxattr = ubifs_listxattr,
-+ .removexattr = ubifs_removexattr,
- };
-
- const struct file_operations ubifs_file_operations = {
---- a/fs/ubifs/journal.c
-+++ b/fs/ubifs/journal.c
-@@ -572,6 +572,13 @@ int ubifs_jnl_update(struct ubifs_info *
- aligned_dlen = ALIGN(dlen, 8);
- aligned_ilen = ALIGN(ilen, 8);
- len = aligned_dlen + aligned_ilen + UBIFS_INO_NODE_SZ;
-+ if (xent) {
-+ /*
-+ * Make sure to account for host_ui->data_len in
-+ * length calculation in case there is extended attribute.
-+ */
-+ len += host_ui->data_len;
-+ }
- dent = kmalloc(len, GFP_NOFS);
- if (!dent)
- return -ENOMEM;
-@@ -648,7 +655,8 @@ int ubifs_jnl_update(struct ubifs_info *
-
- ino_key_init(c, &ino_key, dir->i_ino);
- ino_offs += aligned_ilen;
-- err = ubifs_tnc_add(c, &ino_key, lnum, ino_offs, UBIFS_INO_NODE_SZ);
-+ err = ubifs_tnc_add(c, &ino_key, lnum, ino_offs,
-+ UBIFS_INO_NODE_SZ + host_ui->data_len);
- if (err)
- goto out_ro;
-
---- a/fs/ubifs/xattr.c
-+++ b/fs/ubifs/xattr.c
-@@ -210,12 +210,12 @@ static int change_xattr(struct ubifs_inf
- goto out_free;
- }
- inode->i_size = ui->ui_size = size;
-- ui->data_len = size;
-
- mutex_lock(&host_ui->ui_mutex);
- host->i_ctime = ubifs_current_time(host);
- host_ui->xattr_size -= CALC_XATTR_BYTES(ui->data_len);
- host_ui->xattr_size += CALC_XATTR_BYTES(size);
-+ ui->data_len = size;
-
- /*
- * It is important to write the host inode after the xattr inode
+++ /dev/null
---- a/fs/ubifs/sb.c
-+++ b/fs/ubifs/sb.c
-@@ -63,6 +63,17 @@
- /* Default time granularity in nanoseconds */
- #define DEFAULT_TIME_GRAN 1000000000
-
-+static int get_default_compressor(void)
-+{
-+ if (ubifs_compr_present(UBIFS_COMPR_LZO))
-+ return UBIFS_COMPR_LZO;
-+
-+ if (ubifs_compr_present(UBIFS_COMPR_ZLIB))
-+ return UBIFS_COMPR_ZLIB;
-+
-+ return UBIFS_COMPR_NONE;
-+}
-+
- /**
- * create_default_filesystem - format empty UBI volume.
- * @c: UBIFS file-system description object
-@@ -183,7 +194,7 @@ static int create_default_filesystem(str
- if (c->mount_opts.override_compr)
- sup->default_compr = cpu_to_le16(c->mount_opts.compr_type);
- else
-- sup->default_compr = cpu_to_le16(UBIFS_COMPR_LZO);
-+ sup->default_compr = cpu_to_le16(get_default_compressor());
-
- generate_random_uuid(sup->uuid);
-
+++ /dev/null
---- a/net/netfilter/nf_conntrack_standalone.c
-+++ b/net/netfilter/nf_conntrack_standalone.c
-@@ -17,6 +17,7 @@
- #include <linux/percpu.h>
- #include <linux/netdevice.h>
- #include <linux/security.h>
-+#include <linux/inet.h>
- #include <net/net_namespace.h>
- #ifdef CONFIG_SYSCTL
- #include <linux/sysctl.h>
-@@ -262,10 +263,66 @@ static int ct_open(struct inode *inode,
- sizeof(struct ct_iter_state));
- }
-
-+struct kill_request {
-+ u16 family;
-+ union nf_inet_addr addr;
-+};
-+
-+static int kill_matching(struct nf_conn *i, void *data)
-+{
-+ struct kill_request *kr = data;
-+ struct nf_conntrack_tuple *t1 = &i->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
-+ struct nf_conntrack_tuple *t2 = &i->tuplehash[IP_CT_DIR_REPLY].tuple;
-+
-+ if (!kr->family)
-+ return 1;
-+
-+ if (t1->src.l3num != kr->family)
-+ return 0;
-+
-+ return (nf_inet_addr_cmp(&kr->addr, &t1->src.u3) ||
-+ nf_inet_addr_cmp(&kr->addr, &t1->dst.u3) ||
-+ nf_inet_addr_cmp(&kr->addr, &t2->src.u3) ||
-+ nf_inet_addr_cmp(&kr->addr, &t2->dst.u3));
-+}
-+
-+static ssize_t ct_file_write(struct file *file, const char __user *buf,
-+ size_t count, loff_t *ppos)
-+{
-+ struct seq_file *seq = file->private_data;
-+ struct net *net = seq_file_net(seq);
-+ struct kill_request kr = { };
-+ char req[INET6_ADDRSTRLEN] = { };
-+
-+ if (count == 0)
-+ return 0;
-+
-+ if (count >= INET6_ADDRSTRLEN)
-+ count = INET6_ADDRSTRLEN - 1;
-+
-+ if (copy_from_user(req, buf, count))
-+ return -EFAULT;
-+
-+ if (strnchr(req, count, ':')) {
-+ kr.family = AF_INET6;
-+ if (!in6_pton(req, count, (void *)&kr.addr, '\n', NULL))
-+ return -EINVAL;
-+ } else if (strnchr(req, count, '.')) {
-+ kr.family = AF_INET;
-+ if (!in4_pton(req, count, (void *)&kr.addr, '\n', NULL))
-+ return -EINVAL;
-+ }
-+
-+ nf_ct_iterate_cleanup(net, kill_matching, &kr, 0, 0);
-+
-+ return count;
-+}
-+
- static const struct file_operations ct_file_ops = {
- .owner = THIS_MODULE,
- .open = ct_open,
- .read = seq_read,
-+ .write = ct_file_write,
- .llseek = seq_lseek,
- .release = seq_release_net,
- };
-@@ -367,7 +424,7 @@ static int nf_conntrack_standalone_init_
- {
- struct proc_dir_entry *pde;
-
-- pde = proc_create("nf_conntrack", 0440, net->proc_net, &ct_file_ops);
-+ pde = proc_create("nf_conntrack", 0660, net->proc_net, &ct_file_ops);
- if (!pde)
- goto out_nf_conntrack;
-
+++ /dev/null
---- a/include/uapi/linux/netfilter_ipv4/ip_tables.h
-+++ b/include/uapi/linux/netfilter_ipv4/ip_tables.h
-@@ -87,6 +87,7 @@ struct ipt_ip {
- #define IPT_F_FRAG 0x01 /* Set if rule is a fragment rule */
- #define IPT_F_GOTO 0x02 /* Set if jump is a goto */
- #define IPT_F_MASK 0x03 /* All possible flag bits mask. */
-+#define IPT_F_NO_DEF_MATCH 0x80 /* Internal: no default match rules present */
-
- /* Values for "inv" field in struct ipt_ip. */
- #define IPT_INV_VIA_IN 0x01 /* Invert the sense of IN IFACE. */
---- a/net/ipv4/netfilter/ip_tables.c
-+++ b/net/ipv4/netfilter/ip_tables.c
-@@ -82,6 +82,9 @@ ip_packet_match(const struct iphdr *ip,
-
- #define FWINV(bool, invflg) ((bool) ^ !!(ipinfo->invflags & (invflg)))
-
-+ if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
-+ return true;
-+
- if (FWINV((ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr,
- IPT_INV_SRCIP) ||
- FWINV((ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr,
-@@ -135,6 +138,29 @@ ip_packet_match(const struct iphdr *ip,
- return true;
- }
-
-+static void
-+ip_checkdefault(struct ipt_ip *ip)
-+{
-+ static const char iface_mask[IFNAMSIZ] = {};
-+
-+ if (ip->invflags || ip->flags & IPT_F_FRAG)
-+ return;
-+
-+ if (memcmp(ip->iniface_mask, iface_mask, IFNAMSIZ) != 0)
-+ return;
-+
-+ if (memcmp(ip->outiface_mask, iface_mask, IFNAMSIZ) != 0)
-+ return;
-+
-+ if (ip->smsk.s_addr || ip->dmsk.s_addr)
-+ return;
-+
-+ if (ip->proto)
-+ return;
-+
-+ ip->flags |= IPT_F_NO_DEF_MATCH;
-+}
-+
- static bool
- ip_checkentry(const struct ipt_ip *ip)
- {
-@@ -650,6 +676,8 @@ find_check_entry(struct ipt_entry *e, st
- struct xt_mtchk_param mtpar;
- struct xt_entry_match *ematch;
-
-+ ip_checkdefault(&e->ip);
-+
- j = 0;
- mtpar.net = net;
- mtpar.table = name;
-@@ -942,6 +970,7 @@ copy_entries_to_user(unsigned int total_
- const struct xt_table_info *private = table->private;
- int ret = 0;
- const void *loc_cpu_entry;
-+ u8 flags;
-
- counters = alloc_counters(table);
- if (IS_ERR(counters))
-@@ -973,6 +1002,14 @@ copy_entries_to_user(unsigned int total_
- goto free_counters;
- }
-
-+ flags = e->ip.flags & IPT_F_MASK;
-+ if (copy_to_user(userptr + off
-+ + offsetof(struct ipt_entry, ip.flags),
-+ &flags, sizeof(flags)) != 0) {
-+ ret = -EFAULT;
-+ goto free_counters;
-+ }
-+
- for (i = sizeof(struct ipt_entry);
- i < e->target_offset;
- i += m->u.match_size) {
-@@ -1379,12 +1416,15 @@ compat_copy_entry_to_user(struct ipt_ent
- compat_uint_t origsize;
- const struct xt_entry_match *ematch;
- int ret = 0;
-+ u8 flags = e->ip.flags & IPT_F_MASK;
-
- origsize = *size;
- ce = (struct compat_ipt_entry __user *)*dstptr;
- if (copy_to_user(ce, e, sizeof(struct ipt_entry)) != 0 ||
- copy_to_user(&ce->counters, &counters[i],
-- sizeof(counters[i])) != 0)
-+ sizeof(counters[i])) != 0 ||
-+ copy_to_user(&ce->ip.flags, &flags,
-+ sizeof(flags)) != 0)
- return -EFAULT;
-
- *dstptr += sizeof(struct compat_ipt_entry);
+++ /dev/null
---- a/net/ipv4/netfilter/ip_tables.c
-+++ b/net/ipv4/netfilter/ip_tables.c
-@@ -310,6 +310,33 @@ struct ipt_entry *ipt_next_entry(const s
- return (void *)entry + entry->next_offset;
- }
-
-+static bool
-+ipt_handle_default_rule(struct ipt_entry *e, unsigned int *verdict)
-+{
-+ struct xt_entry_target *t;
-+ struct xt_standard_target *st;
-+
-+ if (e->target_offset != sizeof(struct ipt_entry))
-+ return false;
-+
-+ if (!(e->ip.flags & IPT_F_NO_DEF_MATCH))
-+ return false;
-+
-+ t = ipt_get_target(e);
-+ if (t->u.kernel.target->target)
-+ return false;
-+
-+ st = (struct xt_standard_target *) t;
-+ if (st->verdict == XT_RETURN)
-+ return false;
-+
-+ if (st->verdict >= 0)
-+ return false;
-+
-+ *verdict = (unsigned)(-st->verdict) - 1;
-+ return true;
-+}
-+
- /* Returns one of the generic firewall policies, like NF_ACCEPT. */
- unsigned int
- ipt_do_table(struct sk_buff *skb,
-@@ -331,9 +358,33 @@ ipt_do_table(struct sk_buff *skb,
- unsigned int addend;
-
- /* Initialization */
-+ IP_NF_ASSERT(table->valid_hooks & (1 << hook));
-+ local_bh_disable();
-+ private = table->private;
-+ cpu = smp_processor_id();
-+ /*
-+ * Ensure we load private-> members after we've fetched the base
-+ * pointer.
-+ */
-+ smp_read_barrier_depends();
-+ table_base = private->entries[cpu];
-+
-+ e = get_entry(table_base, private->hook_entry[hook]);
-+ if (ipt_handle_default_rule(e, &verdict)) {
-+ ADD_COUNTER(e->counters, skb->len, 1);
-+ local_bh_enable();
-+ return verdict;
-+ }
-+
- ip = ip_hdr(skb);
- indev = in ? in->name : nulldevname;
- outdev = out ? out->name : nulldevname;
-+
-+ addend = xt_write_recseq_begin();
-+ jumpstack = (struct ipt_entry **)private->jumpstack[cpu];
-+ stackptr = per_cpu_ptr(private->stackptr, cpu);
-+ origptr = *stackptr;
-+
- /* We handle fragments by dealing with the first fragment as
- * if it was a normal packet. All other fragments are treated
- * normally, except that they will NEVER match rules that ask
-@@ -348,23 +399,6 @@ ipt_do_table(struct sk_buff *skb,
- acpar.family = NFPROTO_IPV4;
- acpar.hooknum = hook;
-
-- IP_NF_ASSERT(table->valid_hooks & (1 << hook));
-- local_bh_disable();
-- addend = xt_write_recseq_begin();
-- private = table->private;
-- cpu = smp_processor_id();
-- /*
-- * Ensure we load private-> members after we've fetched the base
-- * pointer.
-- */
-- smp_read_barrier_depends();
-- table_base = private->entries[cpu];
-- jumpstack = (struct ipt_entry **)private->jumpstack[cpu];
-- stackptr = per_cpu_ptr(private->stackptr, cpu);
-- origptr = *stackptr;
--
-- e = get_entry(table_base, private->hook_entry[hook]);
--
- pr_debug("Entering %s(hook %u); sp at %u (UF %p)\n",
- table->name, hook, origptr,
- get_entry(table_base, private->underflow[hook]));
+++ /dev/null
---- a/net/ipv4/netfilter/ip_tables.c
-+++ b/net/ipv4/netfilter/ip_tables.c
-@@ -85,9 +85,11 @@ ip_packet_match(const struct iphdr *ip,
- if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
- return true;
-
-- if (FWINV((ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr,
-+ if (FWINV(ipinfo->smsk.s_addr &&
-+ (ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr,
- IPT_INV_SRCIP) ||
-- FWINV((ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr,
-+ FWINV(ipinfo->dmsk.s_addr &&
-+ (ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr,
- IPT_INV_DSTIP)) {
- dprintf("Source or dest mismatch.\n");
-
+++ /dev/null
---- a/net/netfilter/nf_conntrack_proto_tcp.c
-+++ b/net/netfilter/nf_conntrack_proto_tcp.c
-@@ -33,6 +33,9 @@
- #include <net/netfilter/ipv4/nf_conntrack_ipv4.h>
- #include <net/netfilter/ipv6/nf_conntrack_ipv6.h>
-
-+/* Do not check the TCP window for incoming packets */
-+static int nf_ct_tcp_no_window_check __read_mostly = 1;
-+
- /* "Be conservative in what you do,
- be liberal in what you accept from others."
- If it's non-zero, we mark only out of window RST segments as INVALID. */
-@@ -515,6 +518,9 @@ static bool tcp_in_window(const struct n
- s32 receiver_offset;
- bool res, in_recv_win;
-
-+ if (nf_ct_tcp_no_window_check)
-+ return true;
-+
- /*
- * Get the required data from the packet.
- */
-@@ -1452,6 +1458,13 @@ static struct ctl_table tcp_sysctl_table
- .mode = 0644,
- .proc_handler = proc_dointvec,
- },
-+ {
-+ .procname = "nf_conntrack_tcp_no_window_check",
-+ .data = &nf_ct_tcp_no_window_check,
-+ .maxlen = sizeof(unsigned int),
-+ .mode = 0644,
-+ .proc_handler = proc_dointvec,
-+ },
- { }
- };
-
+++ /dev/null
---- a/net/netfilter/nf_nat_core.c
-+++ b/net/netfilter/nf_nat_core.c
-@@ -90,6 +90,9 @@ int nf_xfrm_me_harder(struct sk_buff *sk
- struct dst_entry *dst;
- int err;
-
-+ if (skb->dev && !dev_net(skb->dev)->xfrm.policy_count[XFRM_POLICY_OUT])
-+ return 0;
-+
- err = xfrm_decode_session(skb, &fl, family);
- if (err < 0)
- return err;
+++ /dev/null
---- /dev/null
-+++ b/net/sched/act_connmark.c
-@@ -0,0 +1,126 @@
-+/*
-+ * Copyright (c) 2011 Felix Fietkau <nbd@nbd.name>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms and conditions of the GNU General Public License,
-+ * version 2, as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-+ * more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along with
-+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-+ * Place - Suite 330, Boston, MA 02111-1307 USA.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/skbuff.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/pkt_cls.h>
-+#include <linux/ip.h>
-+#include <linux/ipv6.h>
-+#include <net/netlink.h>
-+#include <net/pkt_sched.h>
-+#include <net/act_api.h>
-+
-+#include <net/netfilter/nf_conntrack.h>
-+#include <net/netfilter/nf_conntrack_core.h>
-+
-+#define TCA_ACT_CONNMARK 20
-+
-+#define CONNMARK_TAB_MASK 3
-+
-+static int tcf_connmark(struct sk_buff *skb, const struct tc_action *a,
-+ struct tcf_result *res)
-+{
-+ struct nf_conn *c;
-+ enum ip_conntrack_info ctinfo;
-+ int proto;
-+ int r;
-+
-+ if (skb->protocol == htons(ETH_P_IP)) {
-+ if (skb->len < sizeof(struct iphdr))
-+ goto out;
-+ proto = PF_INET;
-+ } else if (skb->protocol == htons(ETH_P_IPV6)) {
-+ if (skb->len < sizeof(struct ipv6hdr))
-+ goto out;
-+ proto = PF_INET6;
-+ } else
-+ goto out;
-+
-+ r = nf_conntrack_in(dev_net(skb->dev), proto, NF_INET_PRE_ROUTING, skb);
-+ if (r != NF_ACCEPT)
-+ goto out;
-+
-+ c = nf_ct_get(skb, &ctinfo);
-+ if (!c)
-+ goto out;
-+
-+ skb->mark = c->mark;
-+ nf_conntrack_put(skb->nfct);
-+ skb->nfct = NULL;
-+
-+out:
-+ return TC_ACT_PIPE;
-+}
-+
-+static int tcf_connmark_init(struct net *net, struct nlattr *nla,
-+ struct nlattr *est, struct tc_action *a,
-+ int ovr, int bind)
-+{
-+ int ret = 0;
-+
-+ if (!tcf_hash_check(0, a, bind)) {
-+ ret = tcf_hash_create(0, est, a, sizeof(struct tcf_common), bind);
-+ if (ret)
-+ return ret;
-+
-+ tcf_hash_insert(a);
-+ ret = ACT_P_CREATED;
-+ } else {
-+ if (!ovr) {
-+ tcf_hash_release(a, bind);
-+ return -EEXIST;
-+ }
-+ }
-+
-+ return ret;
-+}
-+
-+static inline int tcf_connmark_dump(struct sk_buff *skb, struct tc_action *a,
-+ int bind, int ref)
-+{
-+ return skb->len;
-+}
-+
-+static struct tc_action_ops act_connmark_ops = {
-+ .kind = "connmark",
-+ .type = TCA_ACT_CONNMARK,
-+ .owner = THIS_MODULE,
-+ .act = tcf_connmark,
-+ .dump = tcf_connmark_dump,
-+ .init = tcf_connmark_init,
-+};
-+
-+MODULE_AUTHOR("Felix Fietkau <nbd@nbd.name>");
-+MODULE_DESCRIPTION("Connection tracking mark restoring");
-+MODULE_LICENSE("GPL");
-+
-+static int __init connmark_init_module(void)
-+{
-+
-+ return tcf_register_action(&act_connmark_ops, CONNMARK_TAB_MASK);
-+}
-+
-+static void __exit connmark_cleanup_module(void)
-+{
-+ tcf_unregister_action(&act_connmark_ops);
-+}
-+
-+module_init(connmark_init_module);
-+module_exit(connmark_cleanup_module);
---- a/net/sched/Kconfig
-+++ b/net/sched/Kconfig
-@@ -686,6 +686,19 @@ config NET_ACT_CSUM
- To compile this code as a module, choose M here: the
- module will be called act_csum.
-
-+config NET_ACT_CONNMARK
-+ tristate "Connection Tracking Marking"
-+ depends on NET_CLS_ACT
-+ depends on NF_CONNTRACK
-+ depends on NF_CONNTRACK_MARK
-+ ---help---
-+ Say Y here to restore the connmark from a scheduler action
-+
-+ If unsure, say N.
-+
-+ To compile this code as a module, choose M here: the
-+ module will be called act_connmark.
-+
- config NET_CLS_IND
- bool "Incoming device classification"
- depends on NET_CLS_U32 || NET_CLS_FW
---- a/net/sched/Makefile
-+++ b/net/sched/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_NET_ACT_PEDIT) += act_pedit
- obj-$(CONFIG_NET_ACT_SIMP) += act_simple.o
- obj-$(CONFIG_NET_ACT_SKBEDIT) += act_skbedit.o
- obj-$(CONFIG_NET_ACT_CSUM) += act_csum.o
-+obj-$(CONFIG_NET_ACT_CONNMARK) += act_connmark.o
- obj-$(CONFIG_NET_SCH_FIFO) += sch_fifo.o
- obj-$(CONFIG_NET_SCH_CBQ) += sch_cbq.o
- obj-$(CONFIG_NET_SCH_HTB) += sch_htb.o
+++ /dev/null
-This patch allows the user to specify desired packet types (outgoing,
-broadcast, unicast, etc.) on packet sockets via setsockopt.
-This can reduce the load in situations where only a limited number
-of packet types are necessary
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
---- a/include/uapi/linux/if_packet.h
-+++ b/include/uapi/linux/if_packet.h
-@@ -31,6 +31,8 @@ struct sockaddr_ll {
- #define PACKET_KERNEL 7 /* To kernel space */
- /* Unused, PACKET_FASTROUTE and PACKET_LOOPBACK are invisible to user space */
- #define PACKET_FASTROUTE 6 /* Fastrouted frame */
-+#define PACKET_MASK_ANY 0xffffffff /* mask for packet type bits */
-+
-
- /* Packet socket options */
-
-@@ -54,6 +56,7 @@ struct sockaddr_ll {
- #define PACKET_FANOUT 18
- #define PACKET_TX_HAS_OFF 19
- #define PACKET_QDISC_BYPASS 20
-+#define PACKET_RECV_TYPE 21
-
- #define PACKET_FANOUT_HASH 0
- #define PACKET_FANOUT_LB 1
---- a/net/packet/af_packet.c
-+++ b/net/packet/af_packet.c
-@@ -1529,6 +1529,7 @@ static int packet_rcv_spkt(struct sk_buf
- {
- struct sock *sk;
- struct sockaddr_pkt *spkt;
-+ struct packet_sock *po;
-
- /*
- * When we registered the protocol we saved the socket in the data
-@@ -1536,6 +1537,7 @@ static int packet_rcv_spkt(struct sk_buf
- */
-
- sk = pt->af_packet_priv;
-+ po = pkt_sk(sk);
-
- /*
- * Yank back the headers [hope the device set this
-@@ -1548,7 +1550,7 @@ static int packet_rcv_spkt(struct sk_buf
- * so that this procedure is noop.
- */
-
-- if (skb->pkt_type == PACKET_LOOPBACK)
-+ if (!(po->pkt_type & (1 << skb->pkt_type)))
- goto out;
-
- if (!net_eq(dev_net(dev), sock_net(sk)))
-@@ -1747,12 +1749,12 @@ static int packet_rcv(struct sk_buff *sk
- int skb_len = skb->len;
- unsigned int snaplen, res;
-
-- if (skb->pkt_type == PACKET_LOOPBACK)
-- goto drop;
--
- sk = pt->af_packet_priv;
- po = pkt_sk(sk);
-
-+ if (!(po->pkt_type & (1 << skb->pkt_type)))
-+ goto drop;
-+
- if (!net_eq(dev_net(dev), sock_net(sk)))
- goto drop;
-
-@@ -1872,12 +1874,12 @@ static int tpacket_rcv(struct sk_buff *s
- BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h2)) != 32);
- BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h3)) != 48);
-
-- if (skb->pkt_type == PACKET_LOOPBACK)
-- goto drop;
--
- sk = pt->af_packet_priv;
- po = pkt_sk(sk);
-
-+ if (!(po->pkt_type & (1 << skb->pkt_type)))
-+ goto drop;
-+
- if (!net_eq(dev_net(dev), sock_net(sk)))
- goto drop;
-
-@@ -2831,6 +2833,7 @@ static int packet_create(struct net *net
- spin_lock_init(&po->bind_lock);
- mutex_init(&po->pg_vec_lock);
- po->prot_hook.func = packet_rcv;
-+ po->pkt_type = PACKET_MASK_ANY & ~(1 << PACKET_LOOPBACK);
-
- if (sock->type == SOCK_PACKET)
- po->prot_hook.func = packet_rcv_spkt;
-@@ -3425,6 +3428,16 @@ packet_setsockopt(struct socket *sock, i
- po->xmit = val ? packet_direct_xmit : dev_queue_xmit;
- return 0;
- }
-+ case PACKET_RECV_TYPE:
-+ {
-+ unsigned int val;
-+ if (optlen != sizeof(val))
-+ return -EINVAL;
-+ if (copy_from_user(&val, optval, sizeof(val)))
-+ return -EFAULT;
-+ po->pkt_type = val & ~BIT(PACKET_LOOPBACK);
-+ return 0;
-+ }
- default:
- return -ENOPROTOOPT;
- }
-@@ -3476,6 +3489,13 @@ static int packet_getsockopt(struct sock
- case PACKET_VNET_HDR:
- val = po->has_vnet_hdr;
- break;
-+ case PACKET_RECV_TYPE:
-+ if (len > sizeof(unsigned int))
-+ len = sizeof(unsigned int);
-+ val = po->pkt_type;
-+
-+ data = &val;
-+ break;
- case PACKET_VERSION:
- val = po->tp_version;
- break;
---- a/net/packet/internal.h
-+++ b/net/packet/internal.h
-@@ -117,6 +117,7 @@ struct packet_sock {
- struct net_device __rcu *cached_dev;
- int (*xmit)(struct sk_buff *skb);
- struct packet_type prot_hook ____cacheline_aligned_in_smp;
-+ unsigned int pkt_type;
- };
-
- static struct packet_sock *pkt_sk(struct sock *sk)
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: [PATCH] bridge: no EAP forward
-
-When bridging, do not forward EAP frames to other ports, only deliver
-them locally.
-Fixes WPA authentication issues with multiples APs that are connected to
-each other via bridges.
----
---- a/net/bridge/br_input.c
-+++ b/net/bridge/br_input.c
-@@ -97,7 +97,11 @@ int br_handle_frame_finish(struct sk_buf
-
- dst = NULL;
-
-- if (is_broadcast_ether_addr(dest)) {
-+ if (skb->protocol == htons(ETH_P_PAE)) {
-+ skb2 = skb;
-+ /* Do not forward 802.1x/EAP frames */
-+ skb = NULL;
-+ } else if (is_broadcast_ether_addr(dest)) {
- skb2 = skb;
- unicast = false;
- } else if (is_multicast_ether_addr(dest)) {
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: [PATCH] bridge: always accept EAP
-
-Allow EAP frames to pass through bridges even in learning state. Fixes
-issues with WDS.
----
---- a/net/bridge/br_input.c
-+++ b/net/bridge/br_input.c
-@@ -84,7 +84,7 @@ int br_handle_frame_finish(struct sk_buf
- br_multicast_rcv(br, p, skb, vid))
- goto drop;
-
-- if (p->state == BR_STATE_LEARNING)
-+ if ((p->state == BR_STATE_LEARNING) && skb->protocol != htons(ETH_P_PAE))
- goto drop;
-
- BR_INPUT_SKB_CB(skb)->brdev = br->dev;
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: [PATCH] bridge: port isolate
-
-Isolating individual bridge ports
----
---- a/net/bridge/br_private.h
-+++ b/net/bridge/br_private.h
-@@ -172,6 +172,7 @@ struct net_bridge_port
- #define BR_FLOOD 0x00000040
- #define BR_AUTO_MASK (BR_FLOOD | BR_LEARNING)
- #define BR_PROMISC 0x00000080
-+#define BR_ISOLATE_MODE 0x00000100
-
- #ifdef CONFIG_BRIDGE_IGMP_SNOOPING
- struct bridge_mcast_own_query ip4_own_query;
---- a/net/bridge/br_sysfs_if.c
-+++ b/net/bridge/br_sysfs_if.c
-@@ -171,6 +171,22 @@ BRPORT_ATTR_FLAG(root_block, BR_ROOT_BLO
- BRPORT_ATTR_FLAG(learning, BR_LEARNING);
- BRPORT_ATTR_FLAG(unicast_flood, BR_FLOOD);
-
-+static ssize_t show_isolate_mode(struct net_bridge_port *p, char *buf)
-+{
-+ int isolate_mode = (p->flags & BR_ISOLATE_MODE) ? 1 : 0;
-+ return sprintf(buf, "%d\n", isolate_mode);
-+}
-+static ssize_t store_isolate_mode(struct net_bridge_port *p, unsigned long v)
-+{
-+ if (v)
-+ p->flags |= BR_ISOLATE_MODE;
-+ else
-+ p->flags &= ~BR_ISOLATE_MODE;
-+ return 0;
-+}
-+static BRPORT_ATTR(isolate_mode, S_IRUGO | S_IWUSR,
-+ show_isolate_mode, store_isolate_mode);
-+
- #ifdef CONFIG_BRIDGE_IGMP_SNOOPING
- static ssize_t show_multicast_router(struct net_bridge_port *p, char *buf)
- {
-@@ -213,6 +229,7 @@ static const struct brport_attribute *br
- &brport_attr_multicast_router,
- &brport_attr_multicast_fast_leave,
- #endif
-+ &brport_attr_isolate_mode,
- NULL
- };
-
---- a/net/bridge/br_input.c
-+++ b/net/bridge/br_input.c
-@@ -120,8 +120,8 @@ int br_handle_frame_finish(struct sk_buf
-
- unicast = false;
- br->dev->stats.multicast++;
-- } else if ((dst = __br_fdb_get(br, dest, vid)) &&
-- dst->is_local) {
-+ } else if ((p->flags & BR_ISOLATE_MODE) ||
-+ ((dst = __br_fdb_get(br, dest, vid)) && dst->is_local)) {
- skb2 = skb;
- /* Do not forward the packet since it's local. */
- skb = NULL;
---- a/net/bridge/br_forward.c
-+++ b/net/bridge/br_forward.c
-@@ -117,7 +117,7 @@ EXPORT_SYMBOL_GPL(br_deliver);
- /* called with rcu_read_lock */
- void br_forward(const struct net_bridge_port *to, struct sk_buff *skb, struct sk_buff *skb0)
- {
-- if (should_deliver(to, skb)) {
-+ if (should_deliver(to, skb) && !(to->flags & BR_ISOLATE_MODE)) {
- if (skb0)
- deliver_clone(to, skb, __br_forward);
- else
-@@ -173,7 +173,7 @@ static void br_flood(struct net_bridge *
- struct sk_buff *skb0,
- void (*__packet_hook)(const struct net_bridge_port *p,
- struct sk_buff *skb),
-- bool unicast)
-+ bool unicast, bool forward)
- {
- struct net_bridge_port *p;
- struct net_bridge_port *prev;
-@@ -181,6 +181,8 @@ static void br_flood(struct net_bridge *
- prev = NULL;
-
- list_for_each_entry_rcu(p, &br->port_list, list) {
-+ if (forward && (p->flags & BR_ISOLATE_MODE))
-+ continue;
- /* Do not flood unicast traffic to ports that turn it off */
- if (unicast && !(p->flags & BR_FLOOD))
- continue;
-@@ -207,14 +209,14 @@ out:
- /* called with rcu_read_lock */
- void br_flood_deliver(struct net_bridge *br, struct sk_buff *skb, bool unicast)
- {
-- br_flood(br, skb, NULL, __br_deliver, unicast);
-+ br_flood(br, skb, NULL, __br_deliver, unicast, false);
- }
-
- /* called under bridge lock */
- void br_flood_forward(struct net_bridge *br, struct sk_buff *skb,
- struct sk_buff *skb2, bool unicast)
- {
-- br_flood(br, skb, skb2, __br_forward, unicast);
-+ br_flood(br, skb, skb2, __br_forward, unicast, true);
- }
-
- #ifdef CONFIG_BRIDGE_IGMP_SNOOPING
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: [PATCH] bridge: multicast to unicast
-
-Implement optinal multicast->unicast conversion for igmp snooping
----
---- a/net/bridge/br_multicast.c
-+++ b/net/bridge/br_multicast.c
-@@ -635,7 +635,8 @@ struct net_bridge_port_group *br_multica
- struct net_bridge_port *port,
- struct br_ip *group,
- struct net_bridge_port_group __rcu *next,
-- unsigned char state)
-+ unsigned char state,
-+ const unsigned char *src)
- {
- struct net_bridge_port_group *p;
-
-@@ -650,12 +651,33 @@ struct net_bridge_port_group *br_multica
- hlist_add_head(&p->mglist, &port->mglist);
- setup_timer(&p->timer, br_multicast_port_group_expired,
- (unsigned long)p);
-+ if ((port->flags & BR_MULTICAST_TO_UCAST) && src) {
-+ memcpy(p->eth_addr, src, ETH_ALEN);
-+ p->unicast = true;
-+ }
- return p;
- }
-
-+static bool br_port_group_equal(struct net_bridge_port_group *p,
-+ struct net_bridge_port *port,
-+ const unsigned char *src)
-+{
-+ if (p->port != port)
-+ return false;
-+
-+ if (!p->unicast)
-+ return true;
-+
-+ if (!src)
-+ return false;
-+
-+ return ether_addr_equal(src, p->eth_addr);
-+}
-+
- static int br_multicast_add_group(struct net_bridge *br,
- struct net_bridge_port *port,
-- struct br_ip *group)
-+ struct br_ip *group,
-+ const unsigned char *src)
- {
- struct net_bridge_mdb_entry *mp;
- struct net_bridge_port_group *p;
-@@ -682,13 +704,13 @@ static int br_multicast_add_group(struct
- for (pp = &mp->ports;
- (p = mlock_dereference(*pp, br)) != NULL;
- pp = &p->next) {
-- if (p->port == port)
-+ if (br_port_group_equal(p, port, src))
- goto found;
- if ((unsigned long)p->port < (unsigned long)port)
- break;
- }
-
-- p = br_multicast_new_port_group(port, group, *pp, MDB_TEMPORARY);
-+ p = br_multicast_new_port_group(port, group, *pp, MDB_TEMPORARY, src);
- if (unlikely(!p))
- goto err;
- rcu_assign_pointer(*pp, p);
-@@ -707,7 +729,7 @@ err:
- static int br_ip4_multicast_add_group(struct net_bridge *br,
- struct net_bridge_port *port,
- __be32 group,
-- __u16 vid)
-+ __u16 vid, const unsigned char *src)
- {
- struct br_ip br_group;
-
-@@ -718,14 +740,14 @@ static int br_ip4_multicast_add_group(st
- br_group.proto = htons(ETH_P_IP);
- br_group.vid = vid;
-
-- return br_multicast_add_group(br, port, &br_group);
-+ return br_multicast_add_group(br, port, &br_group, src);
- }
-
- #if IS_ENABLED(CONFIG_IPV6)
- static int br_ip6_multicast_add_group(struct net_bridge *br,
- struct net_bridge_port *port,
- const struct in6_addr *group,
-- __u16 vid)
-+ __u16 vid, const unsigned char *src)
- {
- struct br_ip br_group;
-
-@@ -736,7 +758,7 @@ static int br_ip6_multicast_add_group(st
- br_group.proto = htons(ETH_P_IPV6);
- br_group.vid = vid;
-
-- return br_multicast_add_group(br, port, &br_group);
-+ return br_multicast_add_group(br, port, &br_group, src);
- }
- #endif
-
-@@ -965,6 +987,7 @@ static int br_ip4_multicast_igmp3_report
- struct sk_buff *skb,
- u16 vid)
- {
-+ const unsigned char *src;
- struct igmpv3_report *ih;
- struct igmpv3_grec *grec;
- int i;
-@@ -1008,7 +1031,8 @@ static int br_ip4_multicast_igmp3_report
- continue;
- }
-
-- err = br_ip4_multicast_add_group(br, port, group, vid);
-+ src = eth_hdr(skb)->h_source;
-+ err = br_ip4_multicast_add_group(br, port, group, vid, src);
- if (err)
- break;
- }
-@@ -1022,6 +1046,7 @@ static int br_ip6_multicast_mld2_report(
- struct sk_buff *skb,
- u16 vid)
- {
-+ const unsigned char *src;
- struct icmp6hdr *icmp6h;
- struct mld2_grec *grec;
- int i;
-@@ -1069,8 +1094,9 @@ static int br_ip6_multicast_mld2_report(
- continue;
- }
-
-+ src = eth_hdr(skb)->h_source;
- err = br_ip6_multicast_add_group(br, port, &grec->grec_mca,
-- vid);
-+ vid, src);
- if (err)
- break;
- }
-@@ -1406,7 +1432,8 @@ br_multicast_leave_group(struct net_brid
- struct net_bridge_port *port,
- struct br_ip *group,
- struct bridge_mcast_other_query *other_query,
-- struct bridge_mcast_own_query *own_query)
-+ struct bridge_mcast_own_query *own_query,
-+ const unsigned char *src)
- {
- struct net_bridge_mdb_htable *mdb;
- struct net_bridge_mdb_entry *mp;
-@@ -1456,7 +1483,7 @@ br_multicast_leave_group(struct net_brid
- for (pp = &mp->ports;
- (p = mlock_dereference(*pp, br)) != NULL;
- pp = &p->next) {
-- if (p->port != port)
-+ if (!br_port_group_equal(p, port, src))
- continue;
-
- rcu_assign_pointer(*pp, p->next);
-@@ -1490,7 +1517,7 @@ br_multicast_leave_group(struct net_brid
- for (p = mlock_dereference(mp->ports, br);
- p != NULL;
- p = mlock_dereference(p->next, br)) {
-- if (p->port != port)
-+ if (!br_port_group_equal(p, port, src))
- continue;
-
- if (!hlist_unhashed(&p->mglist) &&
-@@ -1508,8 +1535,8 @@ out:
-
- static void br_ip4_multicast_leave_group(struct net_bridge *br,
- struct net_bridge_port *port,
-- __be32 group,
-- __u16 vid)
-+ __be32 group, __u16 vid,
-+ const unsigned char *src)
- {
- struct br_ip br_group;
- struct bridge_mcast_own_query *own_query;
-@@ -1524,14 +1551,14 @@ static void br_ip4_multicast_leave_group
- br_group.vid = vid;
-
- br_multicast_leave_group(br, port, &br_group, &br->ip4_other_query,
-- own_query);
-+ own_query, src);
- }
-
- #if IS_ENABLED(CONFIG_IPV6)
- static void br_ip6_multicast_leave_group(struct net_bridge *br,
- struct net_bridge_port *port,
- const struct in6_addr *group,
-- __u16 vid)
-+ __u16 vid, const unsigned char *src)
- {
- struct br_ip br_group;
- struct bridge_mcast_own_query *own_query;
-@@ -1546,7 +1573,7 @@ static void br_ip6_multicast_leave_group
- br_group.vid = vid;
-
- br_multicast_leave_group(br, port, &br_group, &br->ip6_other_query,
-- own_query);
-+ own_query, src);
- }
- #endif
-
-@@ -1555,6 +1582,7 @@ static int br_multicast_ipv4_rcv(struct
- struct sk_buff *skb,
- u16 vid)
- {
-+ const unsigned char *src;
- struct sk_buff *skb2 = skb;
- const struct iphdr *iph;
- struct igmphdr *ih;
-@@ -1628,7 +1656,8 @@ static int br_multicast_ipv4_rcv(struct
- case IGMP_HOST_MEMBERSHIP_REPORT:
- case IGMPV2_HOST_MEMBERSHIP_REPORT:
- BR_INPUT_SKB_CB(skb)->mrouters_only = 1;
-- err = br_ip4_multicast_add_group(br, port, ih->group, vid);
-+ src = eth_hdr(skb)->h_source;
-+ err = br_ip4_multicast_add_group(br, port, ih->group, vid, src);
- break;
- case IGMPV3_HOST_MEMBERSHIP_REPORT:
- err = br_ip4_multicast_igmp3_report(br, port, skb2, vid);
-@@ -1637,7 +1666,8 @@ static int br_multicast_ipv4_rcv(struct
- err = br_ip4_multicast_query(br, port, skb2, vid);
- break;
- case IGMP_HOST_LEAVE_MESSAGE:
-- br_ip4_multicast_leave_group(br, port, ih->group, vid);
-+ src = eth_hdr(skb)->h_source;
-+ br_ip4_multicast_leave_group(br, port, ih->group, vid, src);
- break;
- }
-
-@@ -1655,6 +1685,7 @@ static int br_multicast_ipv6_rcv(struct
- struct sk_buff *skb,
- u16 vid)
- {
-+ const unsigned char *src;
- struct sk_buff *skb2;
- const struct ipv6hdr *ip6h;
- u8 icmp6_type;
-@@ -1764,7 +1795,9 @@ static int br_multicast_ipv6_rcv(struct
- }
- mld = (struct mld_msg *)skb_transport_header(skb2);
- BR_INPUT_SKB_CB(skb)->mrouters_only = 1;
-- err = br_ip6_multicast_add_group(br, port, &mld->mld_mca, vid);
-+ src = eth_hdr(skb)->h_source;
-+ err = br_ip6_multicast_add_group(br, port, &mld->mld_mca, vid,
-+ src);
- break;
- }
- case ICMPV6_MLD2_REPORT:
-@@ -1781,7 +1814,8 @@ static int br_multicast_ipv6_rcv(struct
- goto out;
- }
- mld = (struct mld_msg *)skb_transport_header(skb2);
-- br_ip6_multicast_leave_group(br, port, &mld->mld_mca, vid);
-+ src = eth_hdr(skb)->h_source;
-+ br_ip6_multicast_leave_group(br, port, &mld->mld_mca, vid, src);
- }
- }
-
---- a/net/bridge/br_private.h
-+++ b/net/bridge/br_private.h
-@@ -112,6 +112,9 @@ struct net_bridge_port_group {
- struct timer_list timer;
- struct br_ip addr;
- unsigned char state;
-+
-+ unsigned char eth_addr[ETH_ALEN];
-+ bool unicast;
- };
-
- struct net_bridge_mdb_entry
-@@ -173,6 +176,7 @@ struct net_bridge_port
- #define BR_AUTO_MASK (BR_FLOOD | BR_LEARNING)
- #define BR_PROMISC 0x00000080
- #define BR_ISOLATE_MODE 0x00000100
-+#define BR_MULTICAST_TO_UCAST 0x00000200
-
- #ifdef CONFIG_BRIDGE_IGMP_SNOOPING
- struct bridge_mcast_own_query ip4_own_query;
-@@ -485,7 +489,8 @@ void br_multicast_free_pg(struct rcu_hea
- struct net_bridge_port_group *
- br_multicast_new_port_group(struct net_bridge_port *port, struct br_ip *group,
- struct net_bridge_port_group __rcu *next,
-- unsigned char state);
-+ unsigned char state,
-+ const unsigned char *src);
- void br_mdb_init(void);
- void br_mdb_uninit(void);
- void br_mdb_notify(struct net_device *dev, struct net_bridge_port *port,
---- a/net/bridge/br_mdb.c
-+++ b/net/bridge/br_mdb.c
-@@ -342,7 +342,7 @@ static int br_mdb_add_group(struct net_b
- break;
- }
-
-- p = br_multicast_new_port_group(port, group, *pp, state);
-+ p = br_multicast_new_port_group(port, group, *pp, state, NULL);
- if (unlikely(!p))
- return -ENOMEM;
- rcu_assign_pointer(*pp, p);
---- a/net/bridge/br_forward.c
-+++ b/net/bridge/br_forward.c
-@@ -168,6 +168,34 @@ out:
- return p;
- }
-
-+static struct net_bridge_port *maybe_deliver_addr(
-+ struct net_bridge_port *prev, struct net_bridge_port *p,
-+ struct sk_buff *skb, const unsigned char *addr,
-+ void (*__packet_hook)(const struct net_bridge_port *p,
-+ struct sk_buff *skb))
-+{
-+ struct net_device *dev = BR_INPUT_SKB_CB(skb)->brdev;
-+ const unsigned char *src = eth_hdr(skb)->h_source;
-+
-+ if (!should_deliver(p, skb))
-+ return prev;
-+
-+ /* Even with hairpin, no soliloquies - prevent breaking IPv6 DAD */
-+ if (skb->dev == p->dev && ether_addr_equal(src, addr))
-+ return prev;
-+
-+ skb = skb_copy(skb, GFP_ATOMIC);
-+ if (!skb) {
-+ dev->stats.tx_dropped++;
-+ return prev;
-+ }
-+
-+ memcpy(eth_hdr(skb)->h_dest, addr, ETH_ALEN);
-+ __packet_hook(p, skb);
-+
-+ return prev;
-+}
-+
- /* called under bridge lock */
- static void br_flood(struct net_bridge *br, struct sk_buff *skb,
- struct sk_buff *skb0,
-@@ -232,6 +260,7 @@ static void br_multicast_flood(struct ne
- struct net_bridge_port *prev = NULL;
- struct net_bridge_port_group *p;
- struct hlist_node *rp;
-+ const unsigned char *addr;
-
- rp = rcu_dereference(hlist_first_rcu(&br->router_list));
- p = mdst ? rcu_dereference(mdst->ports) : NULL;
-@@ -242,10 +271,19 @@ static void br_multicast_flood(struct ne
- rport = rp ? hlist_entry(rp, struct net_bridge_port, rlist) :
- NULL;
-
-- port = (unsigned long)lport > (unsigned long)rport ?
-- lport : rport;
--
-- prev = maybe_deliver(prev, port, skb, __packet_hook);
-+ if ((unsigned long)lport > (unsigned long)rport) {
-+ port = lport;
-+ addr = p->unicast ? p->eth_addr : NULL;
-+ } else {
-+ port = rport;
-+ addr = NULL;
-+ }
-+
-+ if (addr)
-+ prev = maybe_deliver_addr(prev, port, skb, addr,
-+ __packet_hook);
-+ else
-+ prev = maybe_deliver(prev, port, skb, __packet_hook);
- if (IS_ERR(prev))
- goto out;
-
---- a/net/bridge/br_sysfs_if.c
-+++ b/net/bridge/br_sysfs_if.c
-@@ -202,6 +202,7 @@ static BRPORT_ATTR(multicast_router, S_I
- store_multicast_router);
-
- BRPORT_ATTR_FLAG(multicast_fast_leave, BR_MULTICAST_FAST_LEAVE);
-+BRPORT_ATTR_FLAG(multicast_to_unicast, BR_MULTICAST_TO_UCAST);
- #endif
-
- static const struct brport_attribute *brport_attrs[] = {
-@@ -228,6 +229,7 @@ static const struct brport_attribute *br
- #ifdef CONFIG_BRIDGE_IGMP_SNOOPING
- &brport_attr_multicast_router,
- &brport_attr_multicast_fast_leave,
-+ &brport_attr_multicast_to_unicast,
- #endif
- &brport_attr_isolate_mode,
- NULL
+++ /dev/null
---- a/drivers/net/ppp/pppoe.c
-+++ b/drivers/net/ppp/pppoe.c
-@@ -859,7 +859,7 @@ static int pppoe_sendmsg(struct kiocb *i
- goto end;
-
-
-- skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32,
-+ skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32 + NET_SKB_PAD,
- 0, GFP_KERNEL);
- if (!skb) {
- error = -ENOMEM;
-@@ -867,7 +867,7 @@ static int pppoe_sendmsg(struct kiocb *i
- }
-
- /* Reserve space for headers. */
-- skb_reserve(skb, dev->hard_header_len);
-+ skb_reserve(skb, dev->hard_header_len + NET_SKB_PAD);
- skb_reset_network_header(skb);
-
- skb->dev = dev;
+++ /dev/null
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -130,7 +130,7 @@ static inline bool dev_xmit_complete(int
- */
-
- #if defined(CONFIG_WLAN) || IS_ENABLED(CONFIG_AX25)
--# if defined(CONFIG_MAC80211_MESH)
-+# if 1 || defined(CONFIG_MAC80211_MESH)
- # define LL_MAX_HEADER 128
- # else
- # define LL_MAX_HEADER 96
+++ /dev/null
---- a/net/netlink/af_netlink.c
-+++ b/net/netlink/af_netlink.c
-@@ -1107,23 +1107,7 @@ void netlink_detachskb(struct sock *sk,
-
- static struct sk_buff *netlink_trim(struct sk_buff *skb, gfp_t allocation)
- {
-- int delta;
--
- WARN_ON(skb->sk != NULL);
-- delta = skb->end - skb->tail;
-- if (is_vmalloc_addr(skb->head) || delta * 2 < skb->truesize)
-- return skb;
--
-- if (skb_shared(skb)) {
-- struct sk_buff *nskb = skb_clone(skb, allocation);
-- if (!nskb)
-- return skb;
-- consume_skb(skb);
-- skb = nskb;
-- }
--
-- if (!pskb_expand_head(skb, 0, -delta, allocation))
-- skb->truesize -= delta;
-
- return skb;
- }
+++ /dev/null
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -2024,7 +2024,7 @@ static inline int pskb_network_may_pull(
- * NET_IP_ALIGN(2) + ethernet_header(14) + IP_header(20/40) + ports(8)
- */
- #ifndef NET_SKB_PAD
--#define NET_SKB_PAD max(32, L1_CACHE_BYTES)
-+#define NET_SKB_PAD max(64, L1_CACHE_BYTES)
- #endif
-
- int ___pskb_trim(struct sk_buff *skb, unsigned int len);
+++ /dev/null
-From 4593a806e31119c5bd3faa00c7210ad862d515af Mon Sep 17 00:00:00 2001
-From: Dave Taht <dave.taht@bufferbloat.net>
-Date: Mon, 31 Dec 2012 10:02:21 -0800
-Subject: [PATCH 3/7] skb_reduce_truesize: helper function for shrinking skbs
- whenever needed
-
-On embedded devices in particular, large queues of small packets from the rx
-path with a large truesize can exist. Reducing their size can reduce
-memory pressure. skb_reduce_truesize is a helper function for doing this,
-when needed.
----
- include/linux/skbuff.h | 18 ++++++++++++++++++
- 1 file changed, 18 insertions(+)
-
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -2069,6 +2069,24 @@ static inline void pskb_trim_unique(stru
- BUG_ON(err);
- }
-
-+/*
-+ * Caller wants to reduce memory needs before queueing skb
-+ * The (expensive) copy should not be be done in fast path.
-+ */
-+static inline struct sk_buff *skb_reduce_truesize(struct sk_buff *skb)
-+{
-+ if (skb->truesize > 2 * SKB_TRUESIZE(skb->len)) {
-+ struct sk_buff *nskb;
-+ nskb = skb_copy_expand(skb, skb_headroom(skb), 0,
-+ GFP_ATOMIC | __GFP_NOWARN);
-+ if (nskb) {
-+ __kfree_skb(skb);
-+ skb = nskb;
-+ }
-+ }
-+ return skb;
-+}
-+
- /**
- * skb_orphan - orphan a buffer
- * @skb: buffer to orphan
+++ /dev/null
-From bc9fec2f87d57bdbff30d296605e24504513f65c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Dave=20T=C3=A4ht?= <dave.taht@bufferbloat.net>
-Date: Mon, 17 Sep 2012 19:20:22 -0700
-Subject: [PATCH 4/7] net: add skb_reduce_truesize support to common qdiscs
-
-Reduce skb size under load when queues begin to fill on the
-commont qdiscs.
----
- net/sched/sch_codel.c | 2 ++
- net/sched/sch_fifo.c | 12 ++++++++----
- net/sched/sch_fq_codel.c | 2 ++
- 3 files changed, 12 insertions(+), 4 deletions(-)
-
---- a/net/sched/sch_codel.c
-+++ b/net/sched/sch_codel.c
-@@ -97,6 +97,8 @@ static int codel_qdisc_enqueue(struct sk
- struct codel_sched_data *q;
-
- if (likely(qdisc_qlen(sch) < sch->limit)) {
-+ if(qdisc_qlen(sch) > 128)
-+ skb = skb_reduce_truesize(skb);
- codel_set_enqueue_time(skb);
- return qdisc_enqueue_tail(skb, sch);
- }
---- a/net/sched/sch_fifo.c
-+++ b/net/sched/sch_fifo.c
-@@ -29,17 +29,21 @@ static int bfifo_enqueue(struct sk_buff
-
- static int pfifo_enqueue(struct sk_buff *skb, struct Qdisc *sch)
- {
-- if (likely(skb_queue_len(&sch->q) < sch->limit))
-+ if (likely(skb_queue_len(&sch->q) < sch->limit)) {
-+ if (skb_queue_len(&sch->q) > 128)
-+ skb = skb_reduce_truesize(skb);
- return qdisc_enqueue_tail(skb, sch);
--
-+ }
- return qdisc_reshape_fail(skb, sch);
- }
-
- static int pfifo_tail_enqueue(struct sk_buff *skb, struct Qdisc *sch)
- {
-- if (likely(skb_queue_len(&sch->q) < sch->limit))
-+ if (likely(skb_queue_len(&sch->q) < sch->limit)) {
-+ if (skb_queue_len(&sch->q) > 128)
-+ skb = skb_reduce_truesize(skb);
- return qdisc_enqueue_tail(skb, sch);
--
-+ }
- /* queue full, remove one skb to fulfill the limit */
- __qdisc_queue_drop_head(sch, &sch->q);
- qdisc_qstats_drop(sch);
---- a/net/sched/sch_fq_codel.c
-+++ b/net/sched/sch_fq_codel.c
-@@ -185,6 +185,8 @@ static int fq_codel_enqueue(struct sk_bu
- return ret;
- }
- idx--;
-+ if (sch->q.qlen > 128)
-+ skb = skb_reduce_truesize(skb);
-
- codel_set_enqueue_time(skb);
- flow = &q->flows[idx];
+++ /dev/null
---- a/net/sched/sch_fq_codel.c
-+++ b/net/sched/sch_fq_codel.c
-@@ -394,8 +394,8 @@ static int fq_codel_init(struct Qdisc *s
- struct fq_codel_sched_data *q = qdisc_priv(sch);
- int i;
-
-- sch->limit = 10*1024;
-- q->flows_cnt = 1024;
-+ sch->limit = 1024;
-+ q->flows_cnt = 128;
- q->quantum = psched_mtu(qdisc_dev(sch));
- q->perturbation = prandom_u32();
- INIT_LIST_HEAD(&q->new_flows);
+++ /dev/null
---- a/net/sched/sch_fq_codel.c
-+++ b/net/sched/sch_fq_codel.c
-@@ -198,7 +198,6 @@ static int fq_codel_enqueue(struct sk_bu
- list_add_tail(&flow->flowchain, &q->new_flows);
- q->new_flow_count++;
- flow->deficit = q->quantum;
-- flow->dropped = 0;
- }
- if (++sch->q.qlen <= sch->limit)
- return NET_XMIT_SUCCESS;
+++ /dev/null
---- a/net/sched/Kconfig
-+++ b/net/sched/Kconfig
-@@ -3,8 +3,9 @@
- #
-
- menuconfig NET_SCHED
-- bool "QoS and/or fair queueing"
-+ def_bool y
- select NET_SCH_FIFO
-+ select NET_SCH_FQ_CODEL
- ---help---
- When the kernel has several packets to send out over a network
- device, it has to decide which ones to send first, which ones to
---- a/net/sched/sch_fq_codel.c
-+++ b/net/sched/sch_fq_codel.c
-@@ -599,7 +599,7 @@ static const struct Qdisc_class_ops fq_c
- .walk = fq_codel_walk,
- };
-
--static struct Qdisc_ops fq_codel_qdisc_ops __read_mostly = {
-+struct Qdisc_ops fq_codel_qdisc_ops __read_mostly = {
- .cl_ops = &fq_codel_class_ops,
- .id = "fq_codel",
- .priv_size = sizeof(struct fq_codel_sched_data),
-@@ -615,6 +615,7 @@ static struct Qdisc_ops fq_codel_qdisc_o
- .dump_stats = fq_codel_dump_stats,
- .owner = THIS_MODULE,
- };
-+EXPORT_SYMBOL(fq_codel_qdisc_ops);
-
- static int __init fq_codel_module_init(void)
- {
---- a/include/net/sch_generic.h
-+++ b/include/net/sch_generic.h
-@@ -341,6 +341,7 @@ extern struct Qdisc noop_qdisc;
- extern struct Qdisc_ops noop_qdisc_ops;
- extern struct Qdisc_ops pfifo_fast_ops;
- extern struct Qdisc_ops mq_qdisc_ops;
-+extern struct Qdisc_ops fq_codel_qdisc_ops;
- extern const struct Qdisc_ops *default_qdisc_ops;
-
- struct Qdisc_class_common {
---- a/net/sched/sch_generic.c
-+++ b/net/sched/sch_generic.c
-@@ -31,7 +31,7 @@
- #include <net/dst.h>
-
- /* Qdisc to use by default */
--const struct Qdisc_ops *default_qdisc_ops = &pfifo_fast_ops;
-+const struct Qdisc_ops *default_qdisc_ops = &fq_codel_qdisc_ops;
- EXPORT_SYMBOL(default_qdisc_ops);
-
- /* Main transmission queue. */
-@@ -742,7 +742,7 @@ static void attach_one_default_qdisc(str
-
- if (dev->tx_queue_len) {
- qdisc = qdisc_create_dflt(dev_queue,
-- default_qdisc_ops, TC_H_ROOT);
-+ &fq_codel_qdisc_ops, TC_H_ROOT);
- if (!qdisc) {
- netdev_info(dev, "activation failed\n");
- return;
---- a/net/sched/sch_mq.c
-+++ b/net/sched/sch_mq.c
-@@ -57,7 +57,7 @@ static int mq_init(struct Qdisc *sch, st
-
- for (ntx = 0; ntx < dev->num_tx_queues; ntx++) {
- dev_queue = netdev_get_tx_queue(dev, ntx);
-- qdisc = qdisc_create_dflt(dev_queue, default_qdisc_ops,
-+ qdisc = qdisc_create_dflt(dev_queue, &fq_codel_qdisc_ops,
- TC_H_MAKE(TC_H_MAJ(sch->handle),
- TC_H_MIN(ntx + 1)));
- if (qdisc == NULL)
---- a/net/sched/sch_mqprio.c
-+++ b/net/sched/sch_mqprio.c
-@@ -124,7 +124,7 @@ static int mqprio_init(struct Qdisc *sch
-
- for (i = 0; i < dev->num_tx_queues; i++) {
- dev_queue = netdev_get_tx_queue(dev, i);
-- qdisc = qdisc_create_dflt(dev_queue, default_qdisc_ops,
-+ qdisc = qdisc_create_dflt(dev_queue, &fq_codel_qdisc_ops,
- TC_H_MAKE(TC_H_MAJ(sch->handle),
- TC_H_MIN(i + 1)));
- if (qdisc == NULL) {
---- a/net/sched/sch_api.c
-+++ b/net/sched/sch_api.c
-@@ -1949,7 +1949,7 @@ static int __init pktsched_init(void)
- return err;
- }
-
-- register_qdisc(&pfifo_fast_ops);
-+ register_qdisc(&fq_codel_qdisc_ops);
- register_qdisc(&pfifo_qdisc_ops);
- register_qdisc(&bfifo_qdisc_ops);
- register_qdisc(&pfifo_head_drop_qdisc_ops);
+++ /dev/null
---- a/net/sched/sch_generic.c
-+++ b/net/sched/sch_generic.c
-@@ -445,140 +445,6 @@ static struct Qdisc noqueue_qdisc = {
- .busylock = __SPIN_LOCK_UNLOCKED(noqueue_qdisc.busylock),
- };
-
--
--static const u8 prio2band[TC_PRIO_MAX + 1] = {
-- 1, 2, 2, 2, 1, 2, 0, 0 , 1, 1, 1, 1, 1, 1, 1, 1
--};
--
--/* 3-band FIFO queue: old style, but should be a bit faster than
-- generic prio+fifo combination.
-- */
--
--#define PFIFO_FAST_BANDS 3
--
--/*
-- * Private data for a pfifo_fast scheduler containing:
-- * - queues for the three band
-- * - bitmap indicating which of the bands contain skbs
-- */
--struct pfifo_fast_priv {
-- u32 bitmap;
-- struct sk_buff_head q[PFIFO_FAST_BANDS];
--};
--
--/*
-- * Convert a bitmap to the first band number where an skb is queued, where:
-- * bitmap=0 means there are no skbs on any band.
-- * bitmap=1 means there is an skb on band 0.
-- * bitmap=7 means there are skbs on all 3 bands, etc.
-- */
--static const int bitmap2band[] = {-1, 0, 1, 0, 2, 0, 1, 0};
--
--static inline struct sk_buff_head *band2list(struct pfifo_fast_priv *priv,
-- int band)
--{
-- return priv->q + band;
--}
--
--static int pfifo_fast_enqueue(struct sk_buff *skb, struct Qdisc *qdisc)
--{
-- if (skb_queue_len(&qdisc->q) < qdisc_dev(qdisc)->tx_queue_len) {
-- int band = prio2band[skb->priority & TC_PRIO_MAX];
-- struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
-- struct sk_buff_head *list = band2list(priv, band);
--
-- priv->bitmap |= (1 << band);
-- qdisc->q.qlen++;
-- return __qdisc_enqueue_tail(skb, qdisc, list);
-- }
--
-- return qdisc_drop(skb, qdisc);
--}
--
--static struct sk_buff *pfifo_fast_dequeue(struct Qdisc *qdisc)
--{
-- struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
-- int band = bitmap2band[priv->bitmap];
--
-- if (likely(band >= 0)) {
-- struct sk_buff_head *list = band2list(priv, band);
-- struct sk_buff *skb = __qdisc_dequeue_head(qdisc, list);
--
-- qdisc->q.qlen--;
-- if (skb_queue_empty(list))
-- priv->bitmap &= ~(1 << band);
--
-- return skb;
-- }
--
-- return NULL;
--}
--
--static struct sk_buff *pfifo_fast_peek(struct Qdisc *qdisc)
--{
-- struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
-- int band = bitmap2band[priv->bitmap];
--
-- if (band >= 0) {
-- struct sk_buff_head *list = band2list(priv, band);
--
-- return skb_peek(list);
-- }
--
-- return NULL;
--}
--
--static void pfifo_fast_reset(struct Qdisc *qdisc)
--{
-- int prio;
-- struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
--
-- for (prio = 0; prio < PFIFO_FAST_BANDS; prio++)
-- __qdisc_reset_queue(qdisc, band2list(priv, prio));
--
-- priv->bitmap = 0;
-- qdisc->qstats.backlog = 0;
-- qdisc->q.qlen = 0;
--}
--
--static int pfifo_fast_dump(struct Qdisc *qdisc, struct sk_buff *skb)
--{
-- struct tc_prio_qopt opt = { .bands = PFIFO_FAST_BANDS };
--
-- memcpy(&opt.priomap, prio2band, TC_PRIO_MAX + 1);
-- if (nla_put(skb, TCA_OPTIONS, sizeof(opt), &opt))
-- goto nla_put_failure;
-- return skb->len;
--
--nla_put_failure:
-- return -1;
--}
--
--static int pfifo_fast_init(struct Qdisc *qdisc, struct nlattr *opt)
--{
-- int prio;
-- struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
--
-- for (prio = 0; prio < PFIFO_FAST_BANDS; prio++)
-- __skb_queue_head_init(band2list(priv, prio));
--
-- /* Can by-pass the queue discipline */
-- qdisc->flags |= TCQ_F_CAN_BYPASS;
-- return 0;
--}
--
--struct Qdisc_ops pfifo_fast_ops __read_mostly = {
-- .id = "pfifo_fast",
-- .priv_size = sizeof(struct pfifo_fast_priv),
-- .enqueue = pfifo_fast_enqueue,
-- .dequeue = pfifo_fast_dequeue,
-- .peek = pfifo_fast_peek,
-- .init = pfifo_fast_init,
-- .reset = pfifo_fast_reset,
-- .dump = pfifo_fast_dump,
-- .owner = THIS_MODULE,
--};
--
- static struct lock_class_key qdisc_tx_busylock;
-
- struct Qdisc *qdisc_alloc(struct netdev_queue *dev_queue,
+++ /dev/null
-From 775d6fe74d1eaec2ba387535b068dde2dc89de9e Mon Sep 17 00:00:00 2001
-From: Steven Barth <steven@midlink.org>
-Date: Thu, 22 May 2014 09:49:05 +0200
-Subject: [PATCH] Add support for MAP-E FMRs (mesh mode)
-
-MAP-E FMRs (draft-ietf-softwire-map-10) are rules for IPv4-communication
-between MAP CEs (mesh mode) without the need to forward such data to a
-border relay. This is similar to how 6rd works but for IPv4 over IPv6.
-
-Signed-off-by: Steven Barth <cyrus@openwrt.org>
----
- include/net/ip6_tunnel.h | 13 ++
- include/uapi/linux/if_tunnel.h | 13 ++
- net/ipv6/ip6_tunnel.c | 276 +++++++++++++++++++++++++++++++++++++++--
- 3 files changed, 291 insertions(+), 11 deletions(-)
-
---- a/include/net/ip6_tunnel.h
-+++ b/include/net/ip6_tunnel.h
-@@ -15,6 +15,18 @@
- /* determine capability on a per-packet basis */
- #define IP6_TNL_F_CAP_PER_PACKET 0x40000
-
-+/* IPv6 tunnel FMR */
-+struct __ip6_tnl_fmr {
-+ struct __ip6_tnl_fmr *next; /* next fmr in list */
-+ struct in6_addr ip6_prefix;
-+ struct in_addr ip4_prefix;
-+
-+ __u8 ip6_prefix_len;
-+ __u8 ip4_prefix_len;
-+ __u8 ea_len;
-+ __u8 offset;
-+};
-+
- struct __ip6_tnl_parm {
- char name[IFNAMSIZ]; /* name of tunnel device */
- int link; /* ifindex of underlying L2 interface */
-@@ -25,6 +37,7 @@ struct __ip6_tnl_parm {
- __u32 flags; /* tunnel flags */
- struct in6_addr laddr; /* local tunnel end-point address */
- struct in6_addr raddr; /* remote tunnel end-point address */
-+ struct __ip6_tnl_fmr *fmrs; /* FMRs */
-
- __be16 i_flags;
- __be16 o_flags;
---- a/include/uapi/linux/if_tunnel.h
-+++ b/include/uapi/linux/if_tunnel.h
-@@ -57,10 +57,23 @@ enum {
- IFLA_IPTUN_ENCAP_FLAGS,
- IFLA_IPTUN_ENCAP_SPORT,
- IFLA_IPTUN_ENCAP_DPORT,
-+ IFLA_IPTUN_FMRS,
- __IFLA_IPTUN_MAX,
- };
- #define IFLA_IPTUN_MAX (__IFLA_IPTUN_MAX - 1)
-
-+enum {
-+ IFLA_IPTUN_FMR_UNSPEC,
-+ IFLA_IPTUN_FMR_IP6_PREFIX,
-+ IFLA_IPTUN_FMR_IP4_PREFIX,
-+ IFLA_IPTUN_FMR_IP6_PREFIX_LEN,
-+ IFLA_IPTUN_FMR_IP4_PREFIX_LEN,
-+ IFLA_IPTUN_FMR_EA_LEN,
-+ IFLA_IPTUN_FMR_OFFSET,
-+ __IFLA_IPTUN_FMR_MAX,
-+};
-+#define IFLA_IPTUN_FMR_MAX (__IFLA_IPTUN_FMR_MAX - 1)
-+
- enum tunnel_encap_types {
- TUNNEL_ENCAP_NONE,
- TUNNEL_ENCAP_FOU,
---- a/net/ipv6/ip6_tunnel.c
-+++ b/net/ipv6/ip6_tunnel.c
-@@ -16,6 +16,8 @@
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
-+ * Changes:
-+ * Steven Barth <cyrus@openwrt.org>: MAP-E FMR support
- */
-
- #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-@@ -77,11 +79,9 @@ static bool log_ecn_error = true;
- module_param(log_ecn_error, bool, 0644);
- MODULE_PARM_DESC(log_ecn_error, "Log packets received with corrupted ECN");
-
--static u32 HASH(const struct in6_addr *addr1, const struct in6_addr *addr2)
-+static u32 HASH(const struct in6_addr *addr)
- {
-- u32 hash = ipv6_addr_hash(addr1) ^ ipv6_addr_hash(addr2);
--
-- return hash_32(hash, HASH_SIZE_SHIFT);
-+ return hash_32(ipv6_addr_hash(addr), HASH_SIZE_SHIFT);
- }
-
- static int ip6_tnl_dev_init(struct net_device *dev);
-@@ -180,15 +180,24 @@ EXPORT_SYMBOL_GPL(ip6_tnl_dst_store);
- static struct ip6_tnl *
- ip6_tnl_lookup(struct net *net, const struct in6_addr *remote, const struct in6_addr *local)
- {
-- unsigned int hash = HASH(remote, local);
-+ unsigned int hash = HASH(local);
- struct ip6_tnl *t;
- struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
-+ struct __ip6_tnl_fmr *fmr;
-
- for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
-- if (ipv6_addr_equal(local, &t->parms.laddr) &&
-- ipv6_addr_equal(remote, &t->parms.raddr) &&
-- (t->dev->flags & IFF_UP))
-+ if (!ipv6_addr_equal(local, &t->parms.laddr) ||
-+ !(t->dev->flags & IFF_UP))
-+ continue;
-+
-+ if (ipv6_addr_equal(remote, &t->parms.raddr))
- return t;
-+
-+ for (fmr = t->parms.fmrs; fmr; fmr = fmr->next) {
-+ if (ipv6_prefix_equal(remote, &fmr->ip6_prefix,
-+ fmr->ip6_prefix_len))
-+ return t;
-+ }
- }
- t = rcu_dereference(ip6n->tnls_wc[0]);
- if (t && (t->dev->flags & IFF_UP))
-@@ -218,7 +227,7 @@ ip6_tnl_bucket(struct ip6_tnl_net *ip6n,
-
- if (!ipv6_addr_any(remote) || !ipv6_addr_any(local)) {
- prio = 1;
-- h = HASH(remote, local);
-+ h = HASH(local);
- }
- return &ip6n->tnls[prio][h];
- }
-@@ -388,6 +397,12 @@ ip6_tnl_dev_uninit(struct net_device *de
- struct net *net = t->net;
- struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
-
-+ while (t->parms.fmrs) {
-+ struct __ip6_tnl_fmr *next = t->parms.fmrs->next;
-+ kfree(t->parms.fmrs);
-+ t->parms.fmrs = next;
-+ }
-+
- if (dev == ip6n->fb_tnl_dev)
- RCU_INIT_POINTER(ip6n->tnls_wc[0], NULL);
- else
-@@ -781,6 +796,108 @@ int ip6_tnl_rcv_ctl(struct ip6_tnl *t,
- }
- EXPORT_SYMBOL_GPL(ip6_tnl_rcv_ctl);
-
-+
-+/**
-+ * ip4ip6_fmr_calc - calculate target / source IPv6-address based on FMR
-+ * @dest: destination IPv6 address buffer
-+ * @skb: received socket buffer
-+ * @fmr: MAP FMR
-+ * @xmit: Calculate for xmit or rcv
-+ **/
-+static void ip4ip6_fmr_calc(struct in6_addr *dest,
-+ const struct iphdr *iph, const uint8_t *end,
-+ const struct __ip6_tnl_fmr *fmr, bool xmit)
-+{
-+ int psidlen = fmr->ea_len - (32 - fmr->ip4_prefix_len);
-+ u8 *portp = NULL;
-+ bool use_dest_addr;
-+ const struct iphdr *dsth = iph;
-+
-+ if ((u8*)dsth >= end)
-+ return;
-+
-+ /* find significant IP header */
-+ if (iph->protocol == IPPROTO_ICMP) {
-+ struct icmphdr *ih = (struct icmphdr*)(((u8*)dsth) + dsth->ihl * 4);
-+ if (ih && ((u8*)&ih[1]) <= end && (
-+ ih->type == ICMP_DEST_UNREACH ||
-+ ih->type == ICMP_SOURCE_QUENCH ||
-+ ih->type == ICMP_TIME_EXCEEDED ||
-+ ih->type == ICMP_PARAMETERPROB ||
-+ ih->type == ICMP_REDIRECT))
-+ dsth = (const struct iphdr*)&ih[1];
-+ }
-+
-+ /* in xmit-path use dest port by default and source port only if
-+ this is an ICMP reply to something else; vice versa in rcv-path */
-+ use_dest_addr = (xmit && dsth == iph) || (!xmit && dsth != iph);
-+
-+ /* get dst port */
-+ if (((u8*)&dsth[1]) <= end && (
-+ dsth->protocol == IPPROTO_UDP ||
-+ dsth->protocol == IPPROTO_TCP ||
-+ dsth->protocol == IPPROTO_SCTP ||
-+ dsth->protocol == IPPROTO_DCCP)) {
-+ /* for UDP, TCP, SCTP and DCCP source and dest port
-+ follow IPv4 header directly */
-+ portp = ((u8*)dsth) + dsth->ihl * 4;
-+
-+ if (use_dest_addr)
-+ portp += sizeof(u16);
-+ } else if (iph->protocol == IPPROTO_ICMP) {
-+ struct icmphdr *ih = (struct icmphdr*)(((u8*)dsth) + dsth->ihl * 4);
-+
-+ /* use icmp identifier as port */
-+ if (((u8*)&ih) <= end && (
-+ (use_dest_addr && (
-+ ih->type == ICMP_ECHOREPLY ||
-+ ih->type == ICMP_TIMESTAMPREPLY ||
-+ ih->type == ICMP_INFO_REPLY ||
-+ ih->type == ICMP_ADDRESSREPLY)) ||
-+ (!use_dest_addr && (
-+ ih->type == ICMP_ECHO ||
-+ ih->type == ICMP_TIMESTAMP ||
-+ ih->type == ICMP_INFO_REQUEST ||
-+ ih->type == ICMP_ADDRESS)
-+ )))
-+ portp = (u8*)&ih->un.echo.id;
-+ }
-+
-+ if ((portp && &portp[2] <= end) || psidlen == 0) {
-+ int frombyte = fmr->ip6_prefix_len / 8;
-+ int fromrem = fmr->ip6_prefix_len % 8;
-+ int bytes = sizeof(struct in6_addr) - frombyte;
-+ const u32 *addr = (use_dest_addr) ? &iph->daddr : &iph->saddr;
-+ u64 eabits = ((u64)ntohl(*addr)) << (32 + fmr->ip4_prefix_len);
-+ u64 t = 0;
-+
-+ /* extract PSID from port and add it to eabits */
-+ u16 psidbits = 0;
-+ if (psidlen > 0) {
-+ psidbits = ((u16)portp[0]) << 8 | ((u16)portp[1]);
-+ psidbits >>= 16 - psidlen - fmr->offset;
-+ psidbits = (u16)(psidbits << (16 - psidlen));
-+ eabits |= ((u64)psidbits) << (48 - (fmr->ea_len - psidlen));
-+ }
-+
-+ /* rewrite destination address */
-+ *dest = fmr->ip6_prefix;
-+ memcpy(&dest->s6_addr[10], addr, sizeof(*addr));
-+ dest->s6_addr16[7] = htons(psidbits >> (16 - psidlen));
-+
-+ if (bytes > sizeof(u64))
-+ bytes = sizeof(u64);
-+
-+ /* insert eabits */
-+ memcpy(&t, &dest->s6_addr[frombyte], bytes);
-+ t = be64_to_cpu(t) & ~(((((u64)1) << fmr->ea_len) - 1)
-+ << (64 - fmr->ea_len - fromrem));
-+ t = cpu_to_be64(t | (eabits >> fromrem));
-+ memcpy(&dest->s6_addr[frombyte], &t, bytes);
-+ }
-+}
-+
-+
- /**
- * ip6_tnl_rcv - decapsulate IPv6 packet and retransmit it locally
- * @skb: received socket buffer
-@@ -825,6 +942,26 @@ static int ip6_tnl_rcv(struct sk_buff *s
- skb_reset_network_header(skb);
- skb->protocol = htons(protocol);
- memset(skb->cb, 0, sizeof(struct inet6_skb_parm));
-+ if (protocol == ETH_P_IP && t->parms.fmrs &&
-+ !ipv6_addr_equal(&ipv6h->saddr, &t->parms.raddr)) {
-+ /* Packet didn't come from BR, so lookup FMR */
-+ struct __ip6_tnl_fmr *fmr;
-+ struct in6_addr expected = t->parms.raddr;
-+ for (fmr = t->parms.fmrs; fmr; fmr = fmr->next)
-+ if (ipv6_prefix_equal(&ipv6h->saddr,
-+ &fmr->ip6_prefix, fmr->ip6_prefix_len))
-+ break;
-+
-+ /* Check that IPv6 matches IPv4 source to prevent spoofing */
-+ if (fmr)
-+ ip4ip6_fmr_calc(&expected, ip_hdr(skb),
-+ skb_tail_pointer(skb), fmr, false);
-+
-+ if (!ipv6_addr_equal(&ipv6h->saddr, &expected)) {
-+ rcu_read_unlock();
-+ goto discard;
-+ }
-+ }
-
- __skb_tunnel_rx(skb, t->dev, t->net);
-
-@@ -1086,6 +1223,7 @@ ip4ip6_tnl_xmit(struct sk_buff *skb, str
- __u8 dsfield;
- __u32 mtu;
- int err;
-+ struct __ip6_tnl_fmr *fmr;
-
- if ((t->parms.proto != IPPROTO_IPIP && t->parms.proto != 0) ||
- !ip6_tnl_xmit_ctl(t))
-@@ -1105,6 +1243,18 @@ ip4ip6_tnl_xmit(struct sk_buff *skb, str
- if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK)
- fl6.flowi6_mark = skb->mark;
-
-+ /* try to find matching FMR */
-+ for (fmr = t->parms.fmrs; fmr; fmr = fmr->next) {
-+ unsigned mshift = 32 - fmr->ip4_prefix_len;
-+ if (ntohl(fmr->ip4_prefix.s_addr) >> mshift ==
-+ ntohl(iph->daddr) >> mshift)
-+ break;
-+ }
-+
-+ /* change dstaddr according to FMR */
-+ if (fmr)
-+ ip4ip6_fmr_calc(&fl6.daddr, iph, skb_tail_pointer(skb), fmr, true);
-+
- err = ip6_tnl_xmit2(skb, dev, dsfield, &fl6, encap_limit, &mtu);
- if (err != 0) {
- /* XXX: send ICMP error even if DF is not set. */
-@@ -1273,6 +1423,14 @@ ip6_tnl_change(struct ip6_tnl *t, const
- t->parms.flowinfo = p->flowinfo;
- t->parms.link = p->link;
- t->parms.proto = p->proto;
-+
-+ while (t->parms.fmrs) {
-+ struct __ip6_tnl_fmr *next = t->parms.fmrs->next;
-+ kfree(t->parms.fmrs);
-+ t->parms.fmrs = next;
-+ }
-+ t->parms.fmrs = p->fmrs;
-+
- ip6_tnl_dst_reset(t);
- ip6_tnl_link_config(t);
- return 0;
-@@ -1303,6 +1461,7 @@ ip6_tnl_parm_from_user(struct __ip6_tnl_
- p->flowinfo = u->flowinfo;
- p->link = u->link;
- p->proto = u->proto;
-+ p->fmrs = NULL;
- memcpy(p->name, u->name, sizeof(u->name));
- }
-
-@@ -1578,6 +1737,15 @@ static int ip6_tnl_validate(struct nlatt
- return 0;
- }
-
-+static const struct nla_policy ip6_tnl_fmr_policy[IFLA_IPTUN_FMR_MAX + 1] = {
-+ [IFLA_IPTUN_FMR_IP6_PREFIX] = { .len = sizeof(struct in6_addr) },
-+ [IFLA_IPTUN_FMR_IP4_PREFIX] = { .len = sizeof(struct in_addr) },
-+ [IFLA_IPTUN_FMR_IP6_PREFIX_LEN] = { .type = NLA_U8 },
-+ [IFLA_IPTUN_FMR_IP4_PREFIX_LEN] = { .type = NLA_U8 },
-+ [IFLA_IPTUN_FMR_EA_LEN] = { .type = NLA_U8 },
-+ [IFLA_IPTUN_FMR_OFFSET] = { .type = NLA_U8 }
-+};
-+
- static void ip6_tnl_netlink_parms(struct nlattr *data[],
- struct __ip6_tnl_parm *parms)
- {
-@@ -1611,6 +1779,46 @@ static void ip6_tnl_netlink_parms(struct
-
- if (data[IFLA_IPTUN_PROTO])
- parms->proto = nla_get_u8(data[IFLA_IPTUN_PROTO]);
-+
-+ if (data[IFLA_IPTUN_FMRS]) {
-+ unsigned rem;
-+ struct nlattr *fmr;
-+ nla_for_each_nested(fmr, data[IFLA_IPTUN_FMRS], rem) {
-+ struct nlattr *fmrd[IFLA_IPTUN_FMR_MAX + 1], *c;
-+ struct __ip6_tnl_fmr *nfmr;
-+
-+ nla_parse_nested(fmrd, IFLA_IPTUN_FMR_MAX,
-+ fmr, ip6_tnl_fmr_policy);
-+
-+ if (!(nfmr = kzalloc(sizeof(*nfmr), GFP_KERNEL)))
-+ continue;
-+
-+ nfmr->offset = 6;
-+
-+ if ((c = fmrd[IFLA_IPTUN_FMR_IP6_PREFIX]))
-+ nla_memcpy(&nfmr->ip6_prefix, fmrd[IFLA_IPTUN_FMR_IP6_PREFIX],
-+ sizeof(nfmr->ip6_prefix));
-+
-+ if ((c = fmrd[IFLA_IPTUN_FMR_IP4_PREFIX]))
-+ nla_memcpy(&nfmr->ip4_prefix, fmrd[IFLA_IPTUN_FMR_IP4_PREFIX],
-+ sizeof(nfmr->ip4_prefix));
-+
-+ if ((c = fmrd[IFLA_IPTUN_FMR_IP6_PREFIX_LEN]))
-+ nfmr->ip6_prefix_len = nla_get_u8(c);
-+
-+ if ((c = fmrd[IFLA_IPTUN_FMR_IP4_PREFIX_LEN]))
-+ nfmr->ip4_prefix_len = nla_get_u8(c);
-+
-+ if ((c = fmrd[IFLA_IPTUN_FMR_EA_LEN]))
-+ nfmr->ea_len = nla_get_u8(c);
-+
-+ if ((c = fmrd[IFLA_IPTUN_FMR_OFFSET]))
-+ nfmr->offset = nla_get_u8(c);
-+
-+ nfmr->next = parms->fmrs;
-+ parms->fmrs = nfmr;
-+ }
-+ }
- }
-
- static int ip6_tnl_newlink(struct net *src_net, struct net_device *dev,
-@@ -1663,6 +1871,12 @@ static void ip6_tnl_dellink(struct net_d
-
- static size_t ip6_tnl_get_size(const struct net_device *dev)
- {
-+ const struct ip6_tnl *t = netdev_priv(dev);
-+ struct __ip6_tnl_fmr *c;
-+ int fmrs = 0;
-+ for (c = t->parms.fmrs; c; c = c->next)
-+ ++fmrs;
-+
- return
- /* IFLA_IPTUN_LINK */
- nla_total_size(4) +
-@@ -1680,6 +1894,24 @@ static size_t ip6_tnl_get_size(const str
- nla_total_size(4) +
- /* IFLA_IPTUN_PROTO */
- nla_total_size(1) +
-+ /* IFLA_IPTUN_FMRS */
-+ nla_total_size(0) +
-+ (
-+ /* nest */
-+ nla_total_size(0) +
-+ /* IFLA_IPTUN_FMR_IP6_PREFIX */
-+ nla_total_size(sizeof(struct in6_addr)) +
-+ /* IFLA_IPTUN_FMR_IP4_PREFIX */
-+ nla_total_size(sizeof(struct in_addr)) +
-+ /* IFLA_IPTUN_FMR_EA_LEN */
-+ nla_total_size(1) +
-+ /* IFLA_IPTUN_FMR_IP6_PREFIX_LEN */
-+ nla_total_size(1) +
-+ /* IFLA_IPTUN_FMR_IP4_PREFIX_LEN */
-+ nla_total_size(1) +
-+ /* IFLA_IPTUN_FMR_OFFSET */
-+ nla_total_size(1)
-+ ) * fmrs +
- 0;
- }
-
-@@ -1687,6 +1919,9 @@ static int ip6_tnl_fill_info(struct sk_b
- {
- struct ip6_tnl *tunnel = netdev_priv(dev);
- struct __ip6_tnl_parm *parm = &tunnel->parms;
-+ struct __ip6_tnl_fmr *c;
-+ int fmrcnt = 0;
-+ struct nlattr *fmrs;
-
- if (nla_put_u32(skb, IFLA_IPTUN_LINK, parm->link) ||
- nla_put(skb, IFLA_IPTUN_LOCAL, sizeof(struct in6_addr),
-@@ -1697,8 +1932,27 @@ static int ip6_tnl_fill_info(struct sk_b
- nla_put_u8(skb, IFLA_IPTUN_ENCAP_LIMIT, parm->encap_limit) ||
- nla_put_be32(skb, IFLA_IPTUN_FLOWINFO, parm->flowinfo) ||
- nla_put_u32(skb, IFLA_IPTUN_FLAGS, parm->flags) ||
-- nla_put_u8(skb, IFLA_IPTUN_PROTO, parm->proto))
-+ nla_put_u8(skb, IFLA_IPTUN_PROTO, parm->proto) ||
-+ !(fmrs = nla_nest_start(skb, IFLA_IPTUN_FMRS)))
- goto nla_put_failure;
-+
-+ for (c = parm->fmrs; c; c = c->next) {
-+ struct nlattr *fmr = nla_nest_start(skb, ++fmrcnt);
-+ if (!fmr ||
-+ nla_put(skb, IFLA_IPTUN_FMR_IP6_PREFIX,
-+ sizeof(c->ip6_prefix), &c->ip6_prefix) ||
-+ nla_put(skb, IFLA_IPTUN_FMR_IP4_PREFIX,
-+ sizeof(c->ip4_prefix), &c->ip4_prefix) ||
-+ nla_put_u8(skb, IFLA_IPTUN_FMR_IP6_PREFIX_LEN, c->ip6_prefix_len) ||
-+ nla_put_u8(skb, IFLA_IPTUN_FMR_IP4_PREFIX_LEN, c->ip4_prefix_len) ||
-+ nla_put_u8(skb, IFLA_IPTUN_FMR_EA_LEN, c->ea_len) ||
-+ nla_put_u8(skb, IFLA_IPTUN_FMR_OFFSET, c->offset))
-+ goto nla_put_failure;
-+
-+ nla_nest_end(skb, fmr);
-+ }
-+ nla_nest_end(skb, fmrs);
-+
- return 0;
-
- nla_put_failure:
-@@ -1714,6 +1968,7 @@ static const struct nla_policy ip6_tnl_p
- [IFLA_IPTUN_FLOWINFO] = { .type = NLA_U32 },
- [IFLA_IPTUN_FLAGS] = { .type = NLA_U32 },
- [IFLA_IPTUN_PROTO] = { .type = NLA_U8 },
-+ [IFLA_IPTUN_FMRS] = { .type = NLA_NESTED },
- };
-
- static struct rtnl_link_ops ip6_link_ops __read_mostly = {
+++ /dev/null
-From e16e888b525503be05b3aea64190e8b3bdef44d0 Mon Sep 17 00:00:00 2001
-From: Markus Stenberg <markus.stenberg@iki.fi>
-Date: Tue, 5 May 2015 13:36:59 +0300
-Subject: [PATCH] ipv6: Fixed source specific default route handling.
-
-If there are only IPv6 source specific default routes present, the
-host gets -ENETUNREACH on e.g. connect() because ip6_dst_lookup_tail
-calls ip6_route_output first, and given source address any, it fails,
-and ip6_route_get_saddr is never called.
-
-The change is to use the ip6_route_get_saddr, even if the initial
-ip6_route_output fails, and then doing ip6_route_output _again_ after
-we have appropriate source address available.
-
-Note that this is '99% fix' to the problem; a correct fix would be to
-do route lookups only within addrconf.c when picking a source address,
-and never call ip6_route_output before source address has been
-populated.
-
-Signed-off-by: Markus Stenberg <markus.stenberg@iki.fi>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- net/ipv6/ip6_output.c | 39 +++++++++++++++++++++++++++++++--------
- net/ipv6/route.c | 5 +++--
- 2 files changed, 34 insertions(+), 10 deletions(-)
-
---- a/net/ipv6/ip6_output.c
-+++ b/net/ipv6/ip6_output.c
-@@ -906,21 +906,45 @@ static int ip6_dst_lookup_tail(struct so
- #endif
- int err;
-
-- if (*dst == NULL)
-- *dst = ip6_route_output(net, sk, fl6);
--
-- if ((err = (*dst)->error))
-- goto out_err_release;
-+ /* The correct way to handle this would be to do
-+ * ip6_route_get_saddr, and then ip6_route_output; however,
-+ * the route-specific preferred source forces the
-+ * ip6_route_output call _before_ ip6_route_get_saddr.
-+ *
-+ * In source specific routing (no src=any default route),
-+ * ip6_route_output will fail given src=any saddr, though, so
-+ * that's why we try it again later.
-+ */
-+ if (ipv6_addr_any(&fl6->saddr) && (!*dst || !(*dst)->error)) {
-+ struct rt6_info *rt;
-+ bool had_dst = *dst != NULL;
-
-- if (ipv6_addr_any(&fl6->saddr)) {
-- struct rt6_info *rt = (struct rt6_info *) *dst;
-+ if (!had_dst)
-+ *dst = ip6_route_output(net, sk, fl6);
-+ rt = (*dst)->error ? NULL : (struct rt6_info *)*dst;
- err = ip6_route_get_saddr(net, rt, &fl6->daddr,
- sk ? inet6_sk(sk)->srcprefs : 0,
- &fl6->saddr);
- if (err)
- goto out_err_release;
-+
-+ /* If we had an erroneous initial result, pretend it
-+ * never existed and let the SA-enabled version take
-+ * over.
-+ */
-+ if (!had_dst && (*dst)->error) {
-+ dst_release(*dst);
-+ *dst = NULL;
-+ }
- }
-
-+ if (!*dst)
-+ *dst = ip6_route_output(net, sk, fl6);
-+
-+ err = (*dst)->error;
-+ if (err)
-+ goto out_err_release;
-+
- #ifdef CONFIG_IPV6_OPTIMISTIC_DAD
- /*
- * Here if the dst entry we've looked up
---- a/net/ipv6/route.c
-+++ b/net/ipv6/route.c
-@@ -2184,9 +2184,10 @@ int ip6_route_get_saddr(struct net *net,
- unsigned int prefs,
- struct in6_addr *saddr)
- {
-- struct inet6_dev *idev = ip6_dst_idev((struct dst_entry *)rt);
-+ struct inet6_dev *idev =
-+ rt ? ip6_dst_idev((struct dst_entry *)rt) : NULL;
- int err = 0;
-- if (rt->rt6i_prefsrc.plen)
-+ if (rt && rt->rt6i_prefsrc.plen)
- *saddr = rt->rt6i_prefsrc.addr;
- else
- err = ipv6_dev_get_saddr(net, idev ? idev->dev : NULL,
+++ /dev/null
-From 1b5aaa4b16f6e6471ab1c07b38068197a1b4c395 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 24 May 2013 14:40:54 +0200
-Subject: [PATCH 1/2] ipv6: allow rejecting with "source address failed policy"
-
-RFC6204 L-14 requires rejecting traffic from invalid addresses with
-ICMPv6 Destination Unreachable, Code 5 (Source address failed ingress/
-egress policy) on the LAN side, so add an appropriate rule for that.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- include/net/netns/ipv6.h | 1 +
- include/uapi/linux/fib_rules.h | 4 +++
- include/uapi/linux/rtnetlink.h | 1 +
- net/ipv4/fib_semantics.c | 4 +++
- net/ipv4/fib_trie.c | 1 +
- net/ipv4/ipmr.c | 1 +
- net/ipv6/fib6_rules.c | 4 +++
- net/ipv6/ip6mr.c | 2 ++
- net/ipv6/route.c | 58 +++++++++++++++++++++++++++++++++++++++++-
- 9 files changed, 75 insertions(+), 1 deletion(-)
-
---- a/include/net/netns/ipv6.h
-+++ b/include/net/netns/ipv6.h
-@@ -59,6 +59,7 @@ struct netns_ipv6 {
- unsigned long ip6_rt_last_gc;
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- struct rt6_info *ip6_prohibit_entry;
-+ struct rt6_info *ip6_policy_failed_entry;
- struct rt6_info *ip6_blk_hole_entry;
- struct fib6_table *fib6_local_tbl;
- struct fib_rules_ops *fib6_rules_ops;
---- a/include/uapi/linux/fib_rules.h
-+++ b/include/uapi/linux/fib_rules.h
-@@ -64,6 +64,10 @@ enum {
- FR_ACT_BLACKHOLE, /* Drop without notification */
- FR_ACT_UNREACHABLE, /* Drop with ENETUNREACH */
- FR_ACT_PROHIBIT, /* Drop with EACCES */
-+ FR_ACT_RES9,
-+ FR_ACT_RES10,
-+ FR_ACT_RES11,
-+ FR_ACT_POLICY_FAILED, /* Drop with EACCES */
- __FR_ACT_MAX,
- };
-
---- a/include/uapi/linux/rtnetlink.h
-+++ b/include/uapi/linux/rtnetlink.h
-@@ -203,6 +203,7 @@ enum {
- RTN_THROW, /* Not in this table */
- RTN_NAT, /* Translate this address */
- RTN_XRESOLVE, /* Use external resolver */
-+ RTN_POLICY_FAILED, /* Failed ingress/egress policy */
- __RTN_MAX
- };
-
---- a/net/ipv4/fib_semantics.c
-+++ b/net/ipv4/fib_semantics.c
-@@ -138,6 +138,10 @@ const struct fib_prop fib_props[RTN_MAX
- .error = -EINVAL,
- .scope = RT_SCOPE_NOWHERE,
- },
-+ [RTN_POLICY_FAILED] = {
-+ .error = -EACCES,
-+ .scope = RT_SCOPE_UNIVERSE,
-+ },
- };
-
- static void rt_fibinfo_free(struct rtable __rcu **rtp)
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -2236,6 +2236,7 @@ static const char *const rtn_type_names[
- [RTN_THROW] = "THROW",
- [RTN_NAT] = "NAT",
- [RTN_XRESOLVE] = "XRESOLVE",
-+ [RTN_POLICY_FAILED] = "POLICY_FAILED",
- };
-
- static inline const char *rtn_type(char *buf, size_t len, unsigned int t)
---- a/net/ipv4/ipmr.c
-+++ b/net/ipv4/ipmr.c
-@@ -184,6 +184,7 @@ static int ipmr_rule_action(struct fib_r
- case FR_ACT_UNREACHABLE:
- return -ENETUNREACH;
- case FR_ACT_PROHIBIT:
-+ case FR_ACT_POLICY_FAILED:
- return -EACCES;
- case FR_ACT_BLACKHOLE:
- default:
---- a/net/ipv6/fib6_rules.c
-+++ b/net/ipv6/fib6_rules.c
-@@ -73,6 +73,10 @@ static int fib6_rule_action(struct fib_r
- err = -EACCES;
- rt = net->ipv6.ip6_prohibit_entry;
- goto discard_pkt;
-+ case FR_ACT_POLICY_FAILED:
-+ err = -EACCES;
-+ rt = net->ipv6.ip6_policy_failed_entry;
-+ goto discard_pkt;
- }
-
- table = fib6_get_table(net, rule->table);
---- a/net/ipv6/ip6mr.c
-+++ b/net/ipv6/ip6mr.c
-@@ -169,6 +169,8 @@ static int ip6mr_rule_action(struct fib_
- return -ENETUNREACH;
- case FR_ACT_PROHIBIT:
- return -EACCES;
-+ case FR_ACT_POLICY_FAILED:
-+ return -EACCES;
- case FR_ACT_BLACKHOLE:
- default:
- return -EINVAL;
---- a/net/ipv6/route.c
-+++ b/net/ipv6/route.c
-@@ -87,6 +87,8 @@ static int ip6_pkt_discard(struct sk_bu
- static int ip6_pkt_discard_out(struct sock *sk, struct sk_buff *skb);
- static int ip6_pkt_prohibit(struct sk_buff *skb);
- static int ip6_pkt_prohibit_out(struct sock *sk, struct sk_buff *skb);
-+static int ip6_pkt_policy_failed(struct sk_buff *skb);
-+static int ip6_pkt_policy_failed_out(struct sock *sk, struct sk_buff *skb);
- static void ip6_link_failure(struct sk_buff *skb);
- static void ip6_rt_update_pmtu(struct dst_entry *dst, struct sock *sk,
- struct sk_buff *skb, u32 mtu);
-@@ -283,6 +285,21 @@ static const struct rt6_info ip6_prohibi
- .rt6i_ref = ATOMIC_INIT(1),
- };
-
-+static const struct rt6_info ip6_policy_failed_entry_template = {
-+ .dst = {
-+ .__refcnt = ATOMIC_INIT(1),
-+ .__use = 1,
-+ .obsolete = DST_OBSOLETE_FORCE_CHK,
-+ .error = -EACCES,
-+ .input = ip6_pkt_policy_failed,
-+ .output = ip6_pkt_policy_failed_out,
-+ },
-+ .rt6i_flags = (RTF_REJECT | RTF_NONEXTHOP),
-+ .rt6i_protocol = RTPROT_KERNEL,
-+ .rt6i_metric = ~(u32) 0,
-+ .rt6i_ref = ATOMIC_INIT(1),
-+};
-+
- static const struct rt6_info ip6_blk_hole_entry_template = {
- .dst = {
- .__refcnt = ATOMIC_INIT(1),
-@@ -1578,6 +1595,11 @@ int ip6_route_add(struct fib6_config *cf
- rt->dst.output = ip6_pkt_prohibit_out;
- rt->dst.input = ip6_pkt_prohibit;
- break;
-+ case RTN_POLICY_FAILED:
-+ rt->dst.error = -EACCES;
-+ rt->dst.output = ip6_pkt_policy_failed_out;
-+ rt->dst.input = ip6_pkt_policy_failed;
-+ break;
- case RTN_THROW:
- default:
- rt->dst.error = (cfg->fc_type == RTN_THROW) ? -EAGAIN
-@@ -2141,6 +2163,17 @@ static int ip6_pkt_prohibit_out(struct s
- return ip6_pkt_drop(skb, ICMPV6_ADM_PROHIBITED, IPSTATS_MIB_OUTNOROUTES);
- }
-
-+static int ip6_pkt_policy_failed(struct sk_buff *skb)
-+{
-+ return ip6_pkt_drop(skb, ICMPV6_POLICY_FAIL, IPSTATS_MIB_INNOROUTES);
-+}
-+
-+static int ip6_pkt_policy_failed_out(struct sock *sk, struct sk_buff *skb)
-+{
-+ skb->dev = skb_dst(skb)->dev;
-+ return ip6_pkt_drop(skb, ICMPV6_POLICY_FAIL, IPSTATS_MIB_OUTNOROUTES);
-+}
-+
- /*
- * Allocate a dst for local (unicast / anycast) address.
- */
-@@ -2365,7 +2398,8 @@ static int rtm_to_fib6_config(struct sk_
- if (rtm->rtm_type == RTN_UNREACHABLE ||
- rtm->rtm_type == RTN_BLACKHOLE ||
- rtm->rtm_type == RTN_PROHIBIT ||
-- rtm->rtm_type == RTN_THROW)
-+ rtm->rtm_type == RTN_THROW ||
-+ rtm->rtm_type == RTN_POLICY_FAILED)
- cfg->fc_flags |= RTF_REJECT;
-
- if (rtm->rtm_type == RTN_LOCAL)
-@@ -2567,6 +2601,9 @@ static int rt6_fill_node(struct net *net
- case -EACCES:
- rtm->rtm_type = RTN_PROHIBIT;
- break;
-+ case -EPERM:
-+ rtm->rtm_type = RTN_POLICY_FAILED;
-+ break;
- case -EAGAIN:
- rtm->rtm_type = RTN_THROW;
- break;
-@@ -2825,6 +2862,8 @@ static int ip6_route_dev_notify(struct n
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- net->ipv6.ip6_prohibit_entry->dst.dev = dev;
- net->ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(dev);
-+ net->ipv6.ip6_policy_failed_entry->dst.dev = dev;
-+ net->ipv6.ip6_policy_failed_entry->rt6i_idev = in6_dev_get(dev);
- net->ipv6.ip6_blk_hole_entry->dst.dev = dev;
- net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev);
- #endif
-@@ -3047,6 +3086,17 @@ static int __net_init ip6_route_net_init
- net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops;
- dst_init_metrics(&net->ipv6.ip6_blk_hole_entry->dst,
- ip6_template_metrics, true);
-+
-+ net->ipv6.ip6_policy_failed_entry =
-+ kmemdup(&ip6_policy_failed_entry_template,
-+ sizeof(*net->ipv6.ip6_policy_failed_entry), GFP_KERNEL);
-+ if (!net->ipv6.ip6_policy_failed_entry)
-+ goto out_ip6_blk_hole_entry;
-+ net->ipv6.ip6_policy_failed_entry->dst.path =
-+ (struct dst_entry *)net->ipv6.ip6_policy_failed_entry;
-+ net->ipv6.ip6_policy_failed_entry->dst.ops = &net->ipv6.ip6_dst_ops;
-+ dst_init_metrics(&net->ipv6.ip6_policy_failed_entry->dst,
-+ ip6_template_metrics, true);
- #endif
-
- net->ipv6.sysctl.flush_delay = 0;
-@@ -3065,6 +3115,8 @@ out:
- return ret;
-
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
-+out_ip6_blk_hole_entry:
-+ kfree(net->ipv6.ip6_blk_hole_entry);
- out_ip6_prohibit_entry:
- kfree(net->ipv6.ip6_prohibit_entry);
- out_ip6_null_entry:
-@@ -3082,6 +3134,7 @@ static void __net_exit ip6_route_net_exi
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- kfree(net->ipv6.ip6_prohibit_entry);
- kfree(net->ipv6.ip6_blk_hole_entry);
-+ kfree(net->ipv6.ip6_policy_failed_entry);
- #endif
- dst_entries_destroy(&net->ipv6.ip6_dst_ops);
- }
-@@ -3155,6 +3208,9 @@ void __init ip6_route_init_special_entri
- init_net.ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
- init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev;
- init_net.ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
-+ init_net.ipv6.ip6_policy_failed_entry->dst.dev = init_net.loopback_dev;
-+ init_net.ipv6.ip6_policy_failed_entry->rt6i_idev =
-+ in6_dev_get(init_net.loopback_dev);
- #endif
- }
-
+++ /dev/null
-From 7749b481ce5d7e232b1f7da5e6b2c44816f51681 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 19 Jan 2014 20:45:51 +0100
-Subject: [PATCH 2/2] net: provide defines for _POLICY_FAILED until all code is
- updated
-
-Upstream introduced ICMPV6_POLICY_FAIL for code 5 of destination
-unreachable, conflicting with our name.
-
-Add appropriate defines to allow our code to build with the new
-name until we have updated our local patches for older kernels
-and userspace packages.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- include/uapi/linux/fib_rules.h | 2 ++
- include/uapi/linux/icmpv6.h | 2 ++
- include/uapi/linux/rtnetlink.h | 2 ++
- 3 files changed, 6 insertions(+)
-
---- a/include/uapi/linux/fib_rules.h
-+++ b/include/uapi/linux/fib_rules.h
-@@ -71,6 +71,8 @@ enum {
- __FR_ACT_MAX,
- };
-
-+#define FR_ACT_FAILED_POLICY FR_ACT_POLICY_FAILED
-+
- #define FR_ACT_MAX (__FR_ACT_MAX - 1)
-
- #endif
---- a/include/uapi/linux/icmpv6.h
-+++ b/include/uapi/linux/icmpv6.h
-@@ -118,6 +118,8 @@ struct icmp6hdr {
- #define ICMPV6_POLICY_FAIL 5
- #define ICMPV6_REJECT_ROUTE 6
-
-+#define ICMPV6_FAILED_POLICY ICMPV6_POLICY_FAIL
-+
- /*
- * Codes for Time Exceeded
- */
---- a/include/uapi/linux/rtnetlink.h
-+++ b/include/uapi/linux/rtnetlink.h
-@@ -207,6 +207,8 @@ enum {
- __RTN_MAX
- };
-
-+#define RTN_FAILED_POLICY RTN_POLICY_FAILED
-+
- #define RTN_MAX (__RTN_MAX - 1)
-
-
+++ /dev/null
-Subject: NET: skip GRO for foreign MAC addresses
-
-For network drivers using napi_gro_receive, packets are run through GRO,
-even when the destination MAC address does not match, and they're supposed
-to be delivered to another host behind a different bridge port.
-
-This can be very expensive, because for drivers without TSO or scatter-
-gather, this can only be undone by copying the skb and checksumming it
-again.
-
-To be able to track foreign MAC addresses in an inexpensive way, create
-a mask of changed bits in MAC addresses of upper devices. This allows
-handling VLANs and bridge devices with different addresses (as long as
-they are not too different).
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -4006,6 +4006,9 @@ static enum gro_result dev_gro_receive(s
- enum gro_result ret;
- int grow;
-
-+ if (skb->gro_skip)
-+ goto normal;
-+
- if (!(skb->dev->features & NETIF_F_GRO))
- goto normal;
-
-@@ -5077,6 +5080,48 @@ static void __netdev_adjacent_dev_unlink
- &upper_dev->adj_list.lower);
- }
-
-+static void __netdev_addr_mask(unsigned char *mask, const unsigned char *addr,
-+ struct net_device *dev)
-+{
-+ int i;
-+
-+ for (i = 0; i < dev->addr_len; i++)
-+ mask[i] |= addr[i] ^ dev->dev_addr[i];
-+}
-+
-+static void __netdev_upper_mask(unsigned char *mask, struct net_device *dev,
-+ struct net_device *lower)
-+{
-+ struct net_device *cur;
-+ struct list_head *iter;
-+
-+ netdev_for_each_upper_dev_rcu(dev, cur, iter) {
-+ __netdev_addr_mask(mask, cur->dev_addr, lower);
-+ __netdev_upper_mask(mask, cur, lower);
-+ }
-+}
-+
-+static void __netdev_update_addr_mask(struct net_device *dev)
-+{
-+ unsigned char mask[MAX_ADDR_LEN];
-+ struct net_device *cur;
-+ struct list_head *iter;
-+
-+ memset(mask, 0, sizeof(mask));
-+ __netdev_upper_mask(mask, dev, dev);
-+ memcpy(dev->local_addr_mask, mask, dev->addr_len);
-+
-+ netdev_for_each_lower_dev(dev, cur, iter)
-+ __netdev_update_addr_mask(cur);
-+}
-+
-+static void netdev_update_addr_mask(struct net_device *dev)
-+{
-+ rcu_read_lock();
-+ __netdev_update_addr_mask(dev);
-+ rcu_read_unlock();
-+}
-+
- static int __netdev_upper_dev_link(struct net_device *dev,
- struct net_device *upper_dev, bool master,
- void *private)
-@@ -5137,6 +5182,7 @@ static int __netdev_upper_dev_link(struc
- goto rollback_lower_mesh;
- }
-
-+ netdev_update_addr_mask(dev);
- call_netdevice_notifiers(NETDEV_CHANGEUPPER, dev);
- return 0;
-
-@@ -5254,6 +5300,7 @@ void netdev_upper_dev_unlink(struct net_
- list_for_each_entry(i, &upper_dev->all_adj_list.upper, list)
- __netdev_adjacent_dev_unlink(dev, i->dev, i->ref_nr);
-
-+ netdev_update_addr_mask(dev);
- call_netdevice_notifiers(NETDEV_CHANGEUPPER, dev);
- }
- EXPORT_SYMBOL(netdev_upper_dev_unlink);
-@@ -5773,6 +5820,7 @@ int dev_set_mac_address(struct net_devic
- if (err)
- return err;
- dev->addr_assign_type = NET_ADDR_SET;
-+ netdev_update_addr_mask(dev);
- call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
- add_device_randomness(dev->dev_addr, dev->addr_len);
- return 0;
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -1556,6 +1556,8 @@ struct net_device {
- struct netdev_hw_addr_list mc;
- struct netdev_hw_addr_list dev_addrs;
-
-+ unsigned char local_addr_mask[MAX_ADDR_LEN];
-+
- #ifdef CONFIG_SYSFS
- struct kset *queues_kset;
- #endif
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -598,7 +598,8 @@ struct sk_buff {
- #endif
- __u8 ipvs_property:1;
- __u8 inner_protocol_type:1;
-- /* 4 or 6 bit hole */
-+ __u8 gro_skip:1;
-+ /* 3 or 5 bit hole */
-
- #ifdef CONFIG_NET_SCHED
- __u16 tc_index; /* traffic control index */
---- a/net/ethernet/eth.c
-+++ b/net/ethernet/eth.c
-@@ -172,6 +172,18 @@ u32 eth_get_headlen(void *data, unsigned
- }
- EXPORT_SYMBOL(eth_get_headlen);
-
-+static inline bool
-+eth_check_local_mask(const void *addr1, const void *addr2, const void *mask)
-+{
-+ const u16 *a1 = addr1;
-+ const u16 *a2 = addr2;
-+ const u16 *m = mask;
-+
-+ return (((a1[0] ^ a2[0]) & ~m[0]) |
-+ ((a1[1] ^ a2[1]) & ~m[1]) |
-+ ((a1[2] ^ a2[2]) & ~m[2]));
-+}
-+
- /**
- * eth_type_trans - determine the packet's protocol ID.
- * @skb: received socket data
-@@ -199,8 +211,12 @@ __be16 eth_type_trans(struct sk_buff *sk
- skb->pkt_type = PACKET_MULTICAST;
- }
- else if (unlikely(!ether_addr_equal_64bits(eth->h_dest,
-- dev->dev_addr)))
-+ dev->dev_addr))) {
- skb->pkt_type = PACKET_OTHERHOST;
-+ if (eth_check_local_mask(eth->h_dest, dev->dev_addr,
-+ dev->local_addr_mask))
-+ skb->gro_skip = 1;
-+ }
-
- /*
- * Some variants of DSA tagging don't have an ethertype field
+++ /dev/null
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:40:01 +0100
-Subject: NET: add of_get_mac_address_mtd()
-
-Many embedded devices have information such as mac addresses stored inside mtd
-devices. This patch allows us to add a property inside a node describing a
-network interface. The new property points at a mtd partition with an offset
-where the mac address can be found.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/of/of_net.c | 37 +++++++++++++++++++++++++++++++++++++
- include/linux/of_net.h | 1 +
- 2 files changed, 38 insertions(+)
-
---- a/drivers/of/of_net.c
-+++ b/drivers/of/of_net.c
-@@ -10,6 +10,7 @@
- #include <linux/of_net.h>
- #include <linux/phy.h>
- #include <linux/export.h>
-+#include <linux/mtd/mtd.h>
-
- /**
- * of_get_phy_mode - Get phy mode for given device_node
-@@ -75,3 +76,45 @@ const void *of_get_mac_address(struct de
- return NULL;
- }
- EXPORT_SYMBOL(of_get_mac_address);
-+
-+#ifdef CONFIG_MTD
-+int of_get_mac_address_mtd(struct device_node *np, unsigned char *mac)
-+{
-+ struct device_node *mtd_np = NULL;
-+ size_t retlen;
-+ int size, ret;
-+ struct mtd_info *mtd;
-+ const char *part;
-+ const __be32 *list;
-+ phandle phandle;
-+ u32 mac_inc = 0;
-+
-+ list = of_get_property(np, "mtd-mac-address", &size);
-+ if (!list || (size != (2 * sizeof(*list))))
-+ return -ENOENT;
-+
-+ phandle = be32_to_cpup(list++);
-+ if (phandle)
-+ mtd_np = of_find_node_by_phandle(phandle);
-+
-+ if (!mtd_np)
-+ return -ENOENT;
-+
-+ part = of_get_property(mtd_np, "label", NULL);
-+ if (!part)
-+ part = mtd_np->name;
-+
-+ mtd = get_mtd_device_nm(part);
-+ if (IS_ERR(mtd))
-+ return PTR_ERR(mtd);
-+
-+ ret = mtd_read(mtd, be32_to_cpup(list), 6, &retlen, mac);
-+ put_mtd_device(mtd);
-+
-+ if (!of_property_read_u32(np, "mtd-mac-address-increment", &mac_inc))
-+ mac[5] += mac_inc;
-+
-+ return ret;
-+}
-+EXPORT_SYMBOL_GPL(of_get_mac_address_mtd);
-+#endif
---- a/include/linux/of_net.h
-+++ b/include/linux/of_net.h
-@@ -11,6 +11,14 @@
- #include <linux/of.h>
- extern int of_get_phy_mode(struct device_node *np);
- extern const void *of_get_mac_address(struct device_node *np);
-+#ifdef CONFIG_MTD
-+extern int of_get_mac_address_mtd(struct device_node *np, unsigned char *mac);
-+#else
-+static inline int of_get_mac_address_mtd(struct device_node *np, unsigned char *mac)
-+{
-+ return -ENOENT;
-+}
-+#endif
- #else
- static inline int of_get_phy_mode(struct device_node *np)
- {
+++ /dev/null
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -12,6 +12,16 @@ menuconfig PHYLIB
-
- if PHYLIB
-
-+config SWCONFIG
-+ tristate "Switch configuration API"
-+ ---help---
-+ Switch configuration API using netlink. This allows
-+ you to configure the VLAN features of certain switches.
-+
-+config SWCONFIG_LEDS
-+ bool "Switch LED trigger support"
-+ depends on (SWCONFIG && LEDS_TRIGGERS)
-+
- comment "MII PHY device drivers"
-
- config AT803X_PHY
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -3,6 +3,7 @@
- libphy-objs := phy.o phy_device.o mdio_bus.o
-
- obj-$(CONFIG_PHYLIB) += libphy.o
-+obj-$(CONFIG_SWCONFIG) += swconfig.o
- obj-$(CONFIG_MARVELL_PHY) += marvell.o
- obj-$(CONFIG_DAVICOM_PHY) += davicom.o
- obj-$(CONFIG_CICADA_PHY) += cicada.o
---- a/include/uapi/linux/Kbuild
-+++ b/include/uapi/linux/Kbuild
-@@ -374,6 +374,7 @@ header-y += stddef.h
- header-y += string.h
- header-y += suspend_ioctls.h
- header-y += swab.h
-+header-y += switch.h
- header-y += synclink.h
- header-y += sysctl.h
- header-y += sysinfo.h
+++ /dev/null
---- a/drivers/net/phy/phy.c
-+++ b/drivers/net/phy/phy.c
-@@ -357,6 +357,50 @@ int phy_ethtool_gset(struct phy_device *
- }
- EXPORT_SYMBOL(phy_ethtool_gset);
-
-+int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr)
-+{
-+ u32 cmd;
-+ int tmp;
-+ struct ethtool_cmd ecmd = { ETHTOOL_GSET };
-+ struct ethtool_value edata = { ETHTOOL_GLINK };
-+
-+ if (get_user(cmd, (u32 *) useraddr))
-+ return -EFAULT;
-+
-+ switch (cmd) {
-+ case ETHTOOL_GSET:
-+ phy_ethtool_gset(phydev, &ecmd);
-+ if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
-+ return -EFAULT;
-+ return 0;
-+
-+ case ETHTOOL_SSET:
-+ if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
-+ return -EFAULT;
-+ return phy_ethtool_sset(phydev, &ecmd);
-+
-+ case ETHTOOL_NWAY_RST:
-+ /* if autoneg is off, it's an error */
-+ tmp = phy_read(phydev, MII_BMCR);
-+ if (tmp & BMCR_ANENABLE) {
-+ tmp |= (BMCR_ANRESTART);
-+ phy_write(phydev, MII_BMCR, tmp);
-+ return 0;
-+ }
-+ return -EINVAL;
-+
-+ case ETHTOOL_GLINK:
-+ edata.data = (phy_read(phydev,
-+ MII_BMSR) & BMSR_LSTATUS) ? 1 : 0;
-+ if (copy_to_user(useraddr, &edata, sizeof(edata)))
-+ return -EFAULT;
-+ return 0;
-+ }
-+
-+ return -EOPNOTSUPP;
-+}
-+EXPORT_SYMBOL(phy_ethtool_ioctl);
-+
- /**
- * phy_mii_ioctl - generic PHY MII ioctl interface
- * @phydev: the phy_device struct
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -752,6 +752,7 @@ void phy_start_machine(struct phy_device
- void phy_stop_machine(struct phy_device *phydev);
- int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
- int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
-+int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr);
- int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd);
- int phy_start_interrupts(struct phy_device *phydev);
- void phy_print_status(struct phy_device *phydev);
+++ /dev/null
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -484,6 +484,12 @@ struct phy_driver {
- /* Determines the negotiated speed and duplex */
- int (*read_status)(struct phy_device *phydev);
-
-+ /*
-+ * Update the value in phydev->link to reflect the
-+ * current link value
-+ */
-+ int (*update_link)(struct phy_device *phydev);
-+
- /* Clears any pending interrupts */
- int (*ack_interrupt)(struct phy_device *phydev);
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -915,6 +915,9 @@ int genphy_update_link(struct phy_device
- {
- int status;
-
-+ if (phydev->drv && phydev->drv->update_link)
-+ return phydev->drv->update_link(phydev);
-+
- /* Do a fake read */
- status = phy_read(phydev, MII_BMSR);
- if (status < 0)
+++ /dev/null
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -674,6 +674,9 @@ void phy_detach(struct phy_device *phyde
- {
- int i;
-
-+ if (phydev->drv && phydev->drv->detach)
-+ phydev->drv->detach(phydev);
-+
- if (phydev->bus->dev.driver)
- module_put(phydev->bus->dev.driver->owner);
-
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -502,6 +502,12 @@ struct phy_driver {
- */
- int (*did_interrupt)(struct phy_device *phydev);
-
-+ /*
-+ * Called before an ethernet device is detached
-+ * from the PHY.
-+ */
-+ void (*detach)(struct phy_device *phydev);
-+
- /* Clears up any memory if needed */
- void (*remove)(struct phy_device *phydev);
-
+++ /dev/null
---- a/drivers/net/phy/mdio_bus.c
-+++ b/drivers/net/phy/mdio_bus.c
-@@ -38,6 +38,8 @@
-
- #include <asm/irq.h>
-
-+#include "mdio-boardinfo.h"
-+
- /**
- * mdiobus_alloc_size - allocate a mii_bus structure
- * @size: extra amount of memory to allocate for private storage.
-@@ -335,9 +337,21 @@ void mdiobus_free(struct mii_bus *bus)
- }
- EXPORT_SYMBOL(mdiobus_free);
-
-+static void mdiobus_setup_phydev_from_boardinfo(struct mii_bus *bus,
-+ struct phy_device *phydev,
-+ struct mdio_board_info *bi)
-+{
-+ if (strcmp(bus->id, bi->bus_id) ||
-+ bi->phy_addr != phydev->addr)
-+ return;
-+
-+ phydev->dev.platform_data = (void *) bi->platform_data;
-+}
-+
- struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr)
- {
- struct phy_device *phydev;
-+ struct mdio_board_entry *be;
- int err;
-
- phydev = get_phy_device(bus, addr, false);
-@@ -350,6 +364,12 @@ struct phy_device *mdiobus_scan(struct m
- */
- of_mdiobus_link_phydev(bus, phydev);
-
-+ mutex_lock(&__mdio_board_lock);
-+ list_for_each_entry(be, &__mdio_board_list, list)
-+ mdiobus_setup_phydev_from_boardinfo(bus, phydev,
-+ &be->board_info);
-+ mutex_unlock(&__mdio_board_lock);
-+
- err = phy_device_register(phydev);
- if (err) {
- phy_device_free(phydev);
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -789,4 +789,22 @@ int __init mdio_bus_init(void);
- void mdio_bus_exit(void);
-
- extern struct bus_type mdio_bus_type;
-+
-+struct mdio_board_info {
-+ const char *bus_id;
-+ int phy_addr;
-+
-+ const void *platform_data;
-+};
-+
-+#ifdef CONFIG_MDIO_BOARDINFO
-+int mdiobus_register_board_info(const struct mdio_board_info *info, unsigned n);
-+#else
-+static inline int
-+mdiobus_register_board_info(const struct mdio_board_info *info, unsigned n)
-+{
-+ return 0;
-+}
-+#endif
-+
- #endif /* __PHY_H */
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -12,6 +12,10 @@ menuconfig PHYLIB
-
- if PHYLIB
-
-+config MDIO_BOARDINFO
-+ bool
-+ default y
-+
- config SWCONFIG
- tristate "Switch configuration API"
- ---help---
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -2,6 +2,8 @@
-
- libphy-objs := phy.o phy_device.o mdio_bus.o
-
-+obj-$(CONFIG_MDIO_BOARDINFO) += mdio-boardinfo.o
-+
- obj-$(CONFIG_PHYLIB) += libphy.o
- obj-$(CONFIG_SWCONFIG) += swconfig.o
- obj-$(CONFIG_MARVELL_PHY) += marvell.o
---- /dev/null
-+++ b/drivers/net/phy/mdio-boardinfo.c
-@@ -0,0 +1,58 @@
-+/*
-+ * mdio-boardinfo.c - collect pre-declarations of PHY devices
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/phy.h>
-+#include <linux/slab.h>
-+#include <linux/export.h>
-+#include <linux/mutex.h>
-+#include <linux/phy.h>
-+
-+#include "mdio-boardinfo.h"
-+
-+/*
-+ * These symbols are exported ONLY FOR the mdio_bus component.
-+ * No other users will be supported.
-+ */
-+
-+LIST_HEAD(__mdio_board_list);
-+EXPORT_SYMBOL_GPL(__mdio_board_list);
-+
-+DEFINE_MUTEX(__mdio_board_lock);
-+EXPORT_SYMBOL_GPL(__mdio_board_lock);
-+
-+/**
-+ * mdio_register_board_info - register PHY devices for a given board
-+ * @info: array of chip descriptors
-+ * @n: how many descriptors are provided
-+ * Context: can sleep
-+ *
-+ * The board info passed can safely be __initdata ... but be careful of
-+ * any embedded pointers (platform_data, etc), they're copied as-is.
-+ */
-+int __init
-+mdiobus_register_board_info(struct mdio_board_info const *info, unsigned n)
-+{
-+ struct mdio_board_entry *be;
-+ int i;
-+
-+ be = kzalloc(n * sizeof(*be), GFP_KERNEL);
-+ if (!be)
-+ return -ENOMEM;
-+
-+ for (i = 0; i < n; i++, be++, info++) {
-+ memcpy(&be->board_info, info, sizeof(*info));
-+ mutex_lock(&__mdio_board_lock);
-+ list_add_tail(&be->list, &__mdio_board_list);
-+ mutex_unlock(&__mdio_board_lock);
-+ }
-+
-+ return 0;
-+}
---- /dev/null
-+++ b/drivers/net/phy/mdio-boardinfo.h
-@@ -0,0 +1,22 @@
-+/*
-+ * mdio-boardinfo.h - boardinfo interface internal to the mdio_bus component
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ */
-+
-+#include <linux/mutex.h>
-+
-+struct mdio_board_entry {
-+ struct list_head list;
-+ struct mdio_board_info board_info;
-+};
-+
-+/* __mdio_board_lock protects __mdio_board_list
-+ * only mdio_bus components are allowed to use these symbols.
-+ */
-+extern struct mutex __mdio_board_lock;
-+extern struct list_head __mdio_board_list;
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -15,7 +15,7 @@ obj-$(CONFIG_MII) += mii.o
- obj-$(CONFIG_MDIO) += mdio.o
- obj-$(CONFIG_NET) += Space.o loopback.o
- obj-$(CONFIG_NETCONSOLE) += netconsole.o
--obj-$(CONFIG_PHYLIB) += phy/
-+obj-y += phy/
- obj-$(CONFIG_RIONET) += rionet.o
- obj-$(CONFIG_NET_TEAM) += team/
- obj-$(CONFIG_TUN) += tun.o
+++ /dev/null
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -132,6 +132,13 @@ config MICREL_PHY
- ---help---
- Supports the KSZ9021, VSC8201, KS8001 PHYs.
-
-+config ADM6996_PHY
-+ tristate "Driver for ADM6996 switches"
-+ select SWCONFIG
-+ ---help---
-+ Currently supports the ADM6996FC and ADM6996M switches.
-+ Support for FC is very limited.
-+
- config FIXED_PHY
- bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
- depends on PHYLIB=y
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
- obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o
- obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o
- obj-$(CONFIG_ICPLUS_PHY) += icplus.o
-+obj-$(CONFIG_ADM6996_PHY) += adm6996.o
- obj-$(CONFIG_REALTEK_PHY) += realtek.o
- obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
- obj-$(CONFIG_FIXED_PHY) += fixed.o
+++ /dev/null
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -1228,6 +1228,7 @@ enum netdev_priv_flags {
- IFF_LIVE_ADDR_CHANGE = 1<<20,
- IFF_MACVLAN = 1<<21,
- IFF_XMIT_DST_RELEASE_PERM = 1<<22,
-+ IFF_NO_IP_ALIGN = 1<<23,
- };
-
- #define IFF_802_1Q_VLAN IFF_802_1Q_VLAN
-@@ -1253,6 +1254,7 @@ enum netdev_priv_flags {
- #define IFF_LIVE_ADDR_CHANGE IFF_LIVE_ADDR_CHANGE
- #define IFF_MACVLAN IFF_MACVLAN
- #define IFF_XMIT_DST_RELEASE_PERM IFF_XMIT_DST_RELEASE_PERM
-+#define IFF_NO_IP_ALIGN IFF_NO_IP_ALIGN
-
- /**
- * struct net_device - The DEVICE structure.
-@@ -1523,6 +1525,11 @@ struct net_device {
- const struct ethtool_ops *ethtool_ops;
- const struct forwarding_accel_ops *fwd_ops;
-
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+ void (*eth_mangle_rx)(struct net_device *dev, struct sk_buff *skb);
-+ struct sk_buff *(*eth_mangle_tx)(struct net_device *dev, struct sk_buff *skb);
-+#endif
-+
- const struct header_ops *header_ops;
-
- unsigned int flags;
-@@ -1587,6 +1594,10 @@ struct net_device {
- void *ax25_ptr;
- struct wireless_dev *ieee80211_ptr;
-
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+ void *phy_ptr; /* PHY device specific data */
-+#endif
-+
- /*
- * Cache lines mostly used on receive path (including eth_type_trans())
- */
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -2055,6 +2055,10 @@ static inline int pskb_trim(struct sk_bu
- return (len < skb->len) ? __pskb_trim(skb, len) : 0;
- }
-
-+extern struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
-+ unsigned int length, gfp_t gfp);
-+
-+
- /**
- * pskb_trim_unique - remove end from a paged unique (not cloned) buffer
- * @skb: buffer to alter
-@@ -2181,16 +2185,6 @@ static inline struct sk_buff *dev_alloc_
- }
-
-
--static inline struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
-- unsigned int length, gfp_t gfp)
--{
-- struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp);
--
-- if (NET_IP_ALIGN && skb)
-- skb_reserve(skb, NET_IP_ALIGN);
-- return skb;
--}
--
- static inline struct sk_buff *netdev_alloc_skb_ip_align(struct net_device *dev,
- unsigned int length)
- {
---- a/net/Kconfig
-+++ b/net/Kconfig
-@@ -25,6 +25,12 @@ menuconfig NET
-
- if NET
-
-+config ETHERNET_PACKET_MANGLE
-+ bool
-+ help
-+ This option can be selected by phy drivers that need to mangle
-+ packets going in or out of an ethernet device.
-+
- config WANT_COMPAT_NETLINK_MESSAGES
- bool
- help
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -2626,10 +2626,20 @@ static int xmit_one(struct sk_buff *skb,
- if (!list_empty(&ptype_all))
- dev_queue_xmit_nit(skb, dev);
-
-- len = skb->len;
-- trace_net_dev_start_xmit(skb, dev);
-- rc = netdev_start_xmit(skb, dev, txq, more);
-- trace_net_dev_xmit(skb, rc, dev, len);
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+ if (!dev->eth_mangle_tx ||
-+ (skb = dev->eth_mangle_tx(dev, skb)) != NULL)
-+#else
-+ if (1)
-+#endif
-+ {
-+ len = skb->len;
-+ trace_net_dev_start_xmit(skb, dev);
-+ rc = netdev_start_xmit(skb, dev, txq, more);
-+ trace_net_dev_xmit(skb, rc, dev, len);
-+ } else {
-+ rc = NETDEV_TX_OK;
-+ }
-
- return rc;
- }
---- a/net/core/skbuff.c
-+++ b/net/core/skbuff.c
-@@ -63,6 +63,7 @@
- #include <linux/errqueue.h>
- #include <linux/prefetch.h>
- #include <linux/if_vlan.h>
-+#include <linux/if.h>
-
- #include <net/protocol.h>
- #include <net/dst.h>
-@@ -471,6 +472,22 @@ struct sk_buff *__netdev_alloc_skb(struc
- }
- EXPORT_SYMBOL(__netdev_alloc_skb);
-
-+struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
-+ unsigned int length, gfp_t gfp)
-+{
-+ struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp);
-+
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+ if (dev && (dev->priv_flags & IFF_NO_IP_ALIGN))
-+ return skb;
-+#endif
-+
-+ if (NET_IP_ALIGN && skb)
-+ skb_reserve(skb, NET_IP_ALIGN);
-+ return skb;
-+}
-+EXPORT_SYMBOL(__netdev_alloc_skb_ip_align);
-+
- void skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page, int off,
- int size, unsigned int truesize)
- {
---- a/net/ethernet/eth.c
-+++ b/net/ethernet/eth.c
-@@ -200,6 +200,12 @@ __be16 eth_type_trans(struct sk_buff *sk
- const struct ethhdr *eth;
-
- skb->dev = dev;
-+
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+ if (dev->eth_mangle_rx)
-+ dev->eth_mangle_rx(dev, skb);
-+#endif
-+
- skb_reset_mac_header(skb);
- skb_pull_inline(skb, ETH_HLEN);
- eth = eth_hdr(skb);
+++ /dev/null
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -139,6 +139,10 @@ config ADM6996_PHY
- Currently supports the ADM6996FC and ADM6996M switches.
- Support for FC is very limited.
-
-+config MVSWITCH_PHY
-+ tristate "Driver for Marvell 88E6060 switches"
-+ select ETHERNET_PACKET_MANGLE
-+
- config FIXED_PHY
- bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
- depends on PHYLIB=y
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -19,6 +19,7 @@ obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o
- obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o
- obj-$(CONFIG_ICPLUS_PHY) += icplus.o
- obj-$(CONFIG_ADM6996_PHY) += adm6996.o
-+obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
- obj-$(CONFIG_REALTEK_PHY) += realtek.o
- obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
- obj-$(CONFIG_FIXED_PHY) += fixed.o
+++ /dev/null
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -143,6 +143,10 @@ config MVSWITCH_PHY
- tristate "Driver for Marvell 88E6060 switches"
- select ETHERNET_PACKET_MANGLE
-
-+config IP17XX_PHY
-+ tristate "Driver for IC+ IP17xx switches"
-+ select SWCONFIG
-+
- config FIXED_PHY
- bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
- depends on PHYLIB=y
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -20,6 +20,7 @@ obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o
- obj-$(CONFIG_ICPLUS_PHY) += icplus.o
- obj-$(CONFIG_ADM6996_PHY) += adm6996.o
- obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
-+obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
- obj-$(CONFIG_REALTEK_PHY) += realtek.o
- obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
- obj-$(CONFIG_FIXED_PHY) += fixed.o
+++ /dev/null
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -147,6 +147,11 @@ config IP17XX_PHY
- tristate "Driver for IC+ IP17xx switches"
- select SWCONFIG
-
-+config AR8216_PHY
-+ tristate "Driver for Atheros AR8216 switches"
-+ select ETHERNET_PACKET_MANGLE
-+ select SWCONFIG
-+
- config FIXED_PHY
- bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
- depends on PHYLIB=y
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -22,6 +22,7 @@ obj-$(CONFIG_ADM6996_PHY) += adm6996.o
- obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
- obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
- obj-$(CONFIG_REALTEK_PHY) += realtek.o
-+obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
- obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
- obj-$(CONFIG_FIXED_PHY) += fixed.o
- obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
+++ /dev/null
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -152,6 +152,10 @@ config AR8216_PHY
- select ETHERNET_PACKET_MANGLE
- select SWCONFIG
-
-+config RTL8306_PHY
-+ tristate "Driver for Realtek RTL8306S switches"
-+ select SWCONFIG
-+
- config FIXED_PHY
- bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
- depends on PHYLIB=y
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -23,6 +23,7 @@ obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
- obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
- obj-$(CONFIG_REALTEK_PHY) += realtek.o
- obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
-+obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
- obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
- obj-$(CONFIG_FIXED_PHY) += fixed.o
- obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
+++ /dev/null
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -250,6 +250,30 @@ config MDIO_BCM_UNIMAC
- controllers as well as some Broadcom Ethernet switches such as the
- Starfighter 2 switches.
-
-+config RTL8366_SMI
-+ tristate "Driver for the RTL8366 SMI interface"
-+ depends on GPIOLIB
-+ ---help---
-+ This module implements the SMI interface protocol which is used
-+ by some RTL8366 ethernet switch devices via the generic GPIO API.
-+
-+if RTL8366_SMI
-+
-+config RTL8366_SMI_DEBUG_FS
-+ bool "RTL8366 SMI interface debugfs support"
-+ depends on DEBUG_FS
-+ default n
-+
-+config RTL8366S_PHY
-+ tristate "Driver for the Realtek RTL8366S switch"
-+ select SWCONFIG
-+
-+config RTL8366RB_PHY
-+ tristate "Driver for the Realtek RTL8366RB switch"
-+ select SWCONFIG
-+
-+endif # RTL8366_SMI
-+
- endif # PHYLIB
-
- config MICREL_KS8995MA
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -24,6 +24,9 @@ obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
- obj-$(CONFIG_REALTEK_PHY) += realtek.o
- obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
- obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
-+obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o
-+obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o
-+obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o
- obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
- obj-$(CONFIG_FIXED_PHY) += fixed.o
- obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
+++ /dev/null
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -272,6 +272,10 @@ config RTL8366RB_PHY
- tristate "Driver for the Realtek RTL8366RB switch"
- select SWCONFIG
-
-+config RTL8367_PHY
-+ tristate "Driver for the Realtek RTL8367R/M switches"
-+ select SWCONFIG
-+
- endif # RTL8366_SMI
-
- endif # PHYLIB
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -27,6 +27,7 @@ obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
- obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o
- obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o
- obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o
-+obj-$(CONFIG_RTL8367_PHY) += rtl8367.o
- obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
- obj-$(CONFIG_FIXED_PHY) += fixed.o
- obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
+++ /dev/null
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -276,6 +276,10 @@ config RTL8367_PHY
- tristate "Driver for the Realtek RTL8367R/M switches"
- select SWCONFIG
-
-+config RTL8367B_PHY
-+ tristate "Driver fot the Realtek RTL8367R-VB switch"
-+ select SWCONFIG
-+
- endif # RTL8366_SMI
-
- endif # PHYLIB
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -28,6 +28,7 @@ obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi
- obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o
- obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o
- obj-$(CONFIG_RTL8367_PHY) += rtl8367.o
-+obj-$(CONFIG_RTL8367B_PHY) += rtl8367b.o
- obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
- obj-$(CONFIG_FIXED_PHY) += fixed.o
- obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
+++ /dev/null
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -287,3 +287,8 @@ endif # PHYLIB
- config MICREL_KS8995MA
- tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
- depends on SPI
-+
-+config PSB6970_PHY
-+ tristate "Lantiq XWAY Tantos (PSB6970) Ethernet switch"
-+ select SWCONFIG
-+ select ETHERNET_PACKET_MANGLE
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -30,6 +30,7 @@ obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb
- obj-$(CONFIG_RTL8367_PHY) += rtl8367.o
- obj-$(CONFIG_RTL8367B_PHY) += rtl8367b.o
- obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
-+obj-$(CONFIG_PSB6970_PHY) += psb6970.o
- obj-$(CONFIG_FIXED_PHY) += fixed.o
- obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
- obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
+++ /dev/null
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -282,6 +282,8 @@ config RTL8367B_PHY
-
- endif # RTL8366_SMI
-
-+source "drivers/net/phy/b53/Kconfig"
-+
- endif # PHYLIB
-
- config MICREL_KS8995MA
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -31,6 +31,7 @@ obj-$(CONFIG_RTL8367_PHY) += rtl8367.o
- obj-$(CONFIG_RTL8367B_PHY) += rtl8367b.o
- obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
- obj-$(CONFIG_PSB6970_PHY) += psb6970.o
-+obj-$(CONFIG_SWCONFIG_B53) += b53/
- obj-$(CONFIG_FIXED_PHY) += fixed.o
- obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
- obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
+++ /dev/null
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -152,6 +152,10 @@ config AR8216_PHY
- select ETHERNET_PACKET_MANGLE
- select SWCONFIG
-
-+config AR8216_PHY_LEDS
-+ bool "Atheros AR8216 switch LED support"
-+ depends on (AR8216_PHY && LEDS_CLASS)
-+
- config RTL8306_PHY
- tristate "Driver for Realtek RTL8306S switches"
- select SWCONFIG
+++ /dev/null
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -143,6 +143,10 @@ config MVSWITCH_PHY
- tristate "Driver for Marvell 88E6060 switches"
- select ETHERNET_PACKET_MANGLE
-
-+config MVSW61XX_PHY
-+ tristate "Driver for Marvell 88E6171/6172 switches"
-+ select SWCONFIG
-+
- config IP17XX_PHY
- tristate "Driver for IC+ IP17xx switches"
- select SWCONFIG
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -20,6 +20,7 @@ obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o
- obj-$(CONFIG_ICPLUS_PHY) += icplus.o
- obj-$(CONFIG_ADM6996_PHY) += adm6996.o
- obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
-+obj-$(CONFIG_MVSW61XX_PHY) += mvsw61xx.o
- obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
- obj-$(CONFIG_REALTEK_PHY) += realtek.o
- obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
+++ /dev/null
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -12,12 +12,14 @@
- */
-
- #include <linux/phy.h>
-+#include <linux/mdio.h>
- #include <linux/module.h>
- #include <linux/string.h>
- #include <linux/netdevice.h>
- #include <linux/etherdevice.h>
- #include <linux/of_gpio.h>
- #include <linux/gpio/consumer.h>
-+#include <linux/platform_data/phy-at803x.h>
-
- #define AT803X_INTR_ENABLE 0x12
- #define AT803X_INTR_STATUS 0x13
-@@ -34,8 +36,16 @@
- #define AT803X_INER 0x0012
- #define AT803X_INER_INIT 0xec00
- #define AT803X_INSR 0x0013
-+
-+#define AT803X_PCS_SMART_EEE_CTRL3 0x805D
-+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK 0x3
-+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT 12
-+#define AT803X_SMART_EEE_CTRL3_LPI_EN BIT(8)
-+
- #define AT803X_DEBUG_ADDR 0x1D
- #define AT803X_DEBUG_DATA 0x1E
-+#define AT803X_DBG0_REG 0x00
-+#define AT803X_DEBUG_RGMII_RX_CLK_DLY BIT(8)
- #define AT803X_DEBUG_SYSTEM_MODE_CTRL 0x05
- #define AT803X_DEBUG_RGMII_TX_CLK_DLY BIT(8)
-
-@@ -50,6 +60,7 @@ MODULE_LICENSE("GPL");
- struct at803x_priv {
- bool phy_reset:1;
- struct gpio_desc *gpiod_reset;
-+ int prev_speed;
- };
-
- struct at803x_context {
-@@ -61,6 +72,43 @@ struct at803x_context {
- u16 led_control;
- };
-
-+static u16
-+at803x_dbg_reg_rmw(struct phy_device *phydev, u16 reg, u16 clear, u16 set)
-+{
-+ struct mii_bus *bus = phydev->bus;
-+ int val;
-+
-+ mutex_lock(&bus->mdio_lock);
-+
-+ bus->write(bus, phydev->addr, AT803X_DEBUG_ADDR, reg);
-+ val = bus->read(bus, phydev->addr, AT803X_DEBUG_DATA);
-+ if (val < 0) {
-+ val = 0xffff;
-+ goto out;
-+ }
-+
-+ val &= ~clear;
-+ val |= set;
-+ bus->write(bus, phydev->addr, AT803X_DEBUG_DATA, val);
-+
-+out:
-+ mutex_unlock(&bus->mdio_lock);
-+ return val;
-+}
-+
-+static inline void
-+at803x_dbg_reg_set(struct phy_device *phydev, u16 reg, u16 set)
-+{
-+ at803x_dbg_reg_rmw(phydev, reg, 0, set);
-+}
-+
-+static inline void
-+at803x_dbg_reg_clr(struct phy_device *phydev, u16 reg, u16 clear)
-+{
-+ at803x_dbg_reg_rmw(phydev, reg, clear, 0);
-+}
-+
-+
- /* save relevant PHY registers to private copy */
- static void at803x_context_save(struct phy_device *phydev,
- struct at803x_context *context)
-@@ -208,8 +256,16 @@ static int at803x_probe(struct phy_devic
- return 0;
- }
-
-+static void at803x_disable_smarteee(struct phy_device *phydev)
-+{
-+ phy_write_mmd(phydev, MDIO_MMD_PCS, AT803X_PCS_SMART_EEE_CTRL3,
-+ 1 << AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT);
-+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
-+}
-+
- static int at803x_config_init(struct phy_device *phydev)
- {
-+ struct at803x_platform_data *pdata;
- int ret;
-
- ret = genphy_config_init(phydev);
-@@ -227,6 +283,26 @@ static int at803x_config_init(struct phy
- return ret;
- }
-
-+ pdata = dev_get_platdata(&phydev->dev);
-+ if (pdata) {
-+ if (pdata->disable_smarteee)
-+ at803x_disable_smarteee(phydev);
-+
-+ if (pdata->enable_rgmii_rx_delay)
-+ at803x_dbg_reg_set(phydev, AT803X_DBG0_REG,
-+ AT803X_DEBUG_RGMII_RX_CLK_DLY);
-+ else
-+ at803x_dbg_reg_clr(phydev, AT803X_DBG0_REG,
-+ AT803X_DEBUG_RGMII_RX_CLK_DLY);
-+
-+ if (pdata->enable_rgmii_tx_delay)
-+ at803x_dbg_reg_set(phydev, AT803X_DEBUG_SYSTEM_MODE_CTRL,
-+ AT803X_DEBUG_RGMII_TX_CLK_DLY);
-+ else
-+ at803x_dbg_reg_clr(phydev, AT803X_DEBUG_SYSTEM_MODE_CTRL,
-+ AT803X_DEBUG_RGMII_TX_CLK_DLY);
-+ }
-+
- return 0;
- }
-
-@@ -258,6 +334,8 @@ static int at803x_config_intr(struct phy
- static void at803x_link_change_notify(struct phy_device *phydev)
- {
- struct at803x_priv *priv = phydev->priv;
-+ struct at803x_platform_data *pdata;
-+ pdata = dev_get_platdata(&phydev->dev);
-
- /*
- * Conduct a hardware reset for AT8030 every time a link loss is
-@@ -288,6 +366,26 @@ static void at803x_link_change_notify(st
- priv->phy_reset = false;
- }
- }
-+ if (pdata && pdata->fixup_rgmii_tx_delay &&
-+ phydev->speed != priv->prev_speed) {
-+ switch (phydev->speed) {
-+ case SPEED_10:
-+ case SPEED_100:
-+ at803x_dbg_reg_set(phydev,
-+ AT803X_DEBUG_SYSTEM_MODE_CTRL,
-+ AT803X_DEBUG_RGMII_TX_CLK_DLY);
-+ break;
-+ case SPEED_1000:
-+ at803x_dbg_reg_clr(phydev,
-+ AT803X_DEBUG_SYSTEM_MODE_CTRL,
-+ AT803X_DEBUG_RGMII_TX_CLK_DLY);
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ priv->prev_speed = phydev->speed;
-+ }
- }
-
- static struct phy_driver at803x_driver[] = {
---- /dev/null
-+++ b/include/linux/platform_data/phy-at803x.h
-@@ -0,0 +1,11 @@
-+#ifndef _PHY_AT803X_PDATA_H
-+#define _PHY_AT803X_PDATA_H
-+
-+struct at803x_platform_data {
-+ int disable_smarteee:1;
-+ int enable_rgmii_tx_delay:1;
-+ int enable_rgmii_rx_delay:1;
-+ int fixup_rgmii_tx_delay:1;
-+};
-+
-+#endif /* _PHY_AT803X_PDATA_H */
+++ /dev/null
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -36,6 +36,9 @@
- #define AT803X_INER 0x0012
- #define AT803X_INER_INIT 0xec00
- #define AT803X_INSR 0x0013
-+#define AT803X_REG_CHIP_CONFIG 0x1f
-+#define AT803X_BT_BX_REG_SEL 0x8000
-+#define AT803X_SGMII_ANEG_EN 0x1000
-
- #define AT803X_PCS_SMART_EEE_CTRL3 0x805D
- #define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK 0x3
-@@ -49,9 +52,10 @@
- #define AT803X_DEBUG_SYSTEM_MODE_CTRL 0x05
- #define AT803X_DEBUG_RGMII_TX_CLK_DLY BIT(8)
-
--#define ATH8030_PHY_ID 0x004dd076
--#define ATH8031_PHY_ID 0x004dd074
--#define ATH8035_PHY_ID 0x004dd072
-+#define AT803X_PHY_ID_MASK 0xffffffef
-+#define ATH8030_PHY_ID 0x004dd076
-+#define ATH8031_PHY_ID 0x004dd074
-+#define ATH8035_PHY_ID 0x004dd072
-
- MODULE_DESCRIPTION("Atheros 803x PHY driver");
- MODULE_AUTHOR("Matus Ujhelyi");
-@@ -267,6 +271,27 @@ static int at803x_config_init(struct phy
- {
- struct at803x_platform_data *pdata;
- int ret;
-+ u32 v;
-+
-+ if (phydev->drv->phy_id == ATH8031_PHY_ID &&
-+ phydev->interface == PHY_INTERFACE_MODE_SGMII)
-+ {
-+ v = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
-+ /* select SGMII/fiber page */
-+ ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
-+ v & ~AT803X_BT_BX_REG_SEL);
-+ if (ret)
-+ return ret;
-+ /* enable SGMII autonegotiation */
-+ ret = phy_write(phydev, MII_BMCR, AT803X_SGMII_ANEG_EN);
-+ if (ret)
-+ return ret;
-+ /* select copper page */
-+ ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
-+ v | AT803X_BT_BX_REG_SEL);
-+ if (ret)
-+ return ret;
-+ }
-
- ret = genphy_config_init(phydev);
- if (ret < 0)
-@@ -393,7 +418,7 @@ static struct phy_driver at803x_driver[]
- /* ATHEROS 8035 */
- .phy_id = ATH8035_PHY_ID,
- .name = "Atheros 8035 ethernet",
-- .phy_id_mask = 0xffffffef,
-+ .phy_id_mask = AT803X_PHY_ID_MASK,
- .probe = at803x_probe,
- .config_init = at803x_config_init,
- .link_change_notify = at803x_link_change_notify,
-@@ -412,7 +437,7 @@ static struct phy_driver at803x_driver[]
- /* ATHEROS 8030 */
- .phy_id = ATH8030_PHY_ID,
- .name = "Atheros 8030 ethernet",
-- .phy_id_mask = 0xffffffef,
-+ .phy_id_mask = AT803X_PHY_ID_MASK,
- .probe = at803x_probe,
- .config_init = at803x_config_init,
- .link_change_notify = at803x_link_change_notify,
-@@ -430,8 +455,8 @@ static struct phy_driver at803x_driver[]
- }, {
- /* ATHEROS 8031 */
- .phy_id = ATH8031_PHY_ID,
-- .name = "Atheros 8031 ethernet",
-- .phy_id_mask = 0xffffffef,
-+ .name = "Atheros 8031/8033 ethernet",
-+ .phy_id_mask = AT803X_PHY_ID_MASK,
- .probe = at803x_probe,
- .config_init = at803x_config_init,
- .link_change_notify = at803x_link_change_notify,
-@@ -465,9 +490,9 @@ module_init(atheros_init);
- module_exit(atheros_exit);
-
- static struct mdio_device_id __maybe_unused atheros_tbl[] = {
-- { ATH8030_PHY_ID, 0xffffffef },
-- { ATH8031_PHY_ID, 0xffffffef },
-- { ATH8035_PHY_ID, 0xffffffef },
-+ { ATH8030_PHY_ID, AT803X_PHY_ID_MASK },
-+ { ATH8031_PHY_ID, AT803X_PHY_ID_MASK },
-+ { ATH8035_PHY_ID, AT803X_PHY_ID_MASK },
- { }
- };
-
+++ /dev/null
-commit 41b976414c88016e2c9d9b2f6667ee67a998d388
-Author: David Woodhouse <David.Woodhouse@intel.com>
-Date: Wed Sep 23 09:45:31 2015 +0100
-
- 8139cp: Dump contents of descriptor ring on TX timeout
-
- We are seeing unexplained TX timeouts under heavy load. Let's try to get
- a better idea of what's going on.
-
- Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
- Signed-off-by: David S. Miller <davem@davemloft.net>
-
-commit 7f4c685633e2df9ba10d49a31dda13715745db37
-Author: David Woodhouse <David.Woodhouse@intel.com>
-Date: Wed Sep 23 09:45:16 2015 +0100
-
- 8139cp: Fix DMA unmapping of transmitted buffers
-
- The low 16 bits of the 'opts1' field in the TX descriptor are supposed
- to still contain the buffer length when the descriptor is handed back to
- us. In practice, at least on my hardware, they don't. So stash the
- original value of the opts1 field and get the length to unmap from
- there.
-
- There are other ways we could have worked out the length, but I actually
- want a stash of the opts1 field anyway so that I can dump it alongside
- the contents of the descriptor ring when we suffer a TX timeout.
-
- Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
- Signed-off-by: David S. Miller <davem@davemloft.net>
-
-commit 0a5aeee0b79fa99d8e04c98dd4e87d4f52aa497b
-Author: David Woodhouse <David.Woodhouse@intel.com>
-Date: Wed Sep 23 09:44:57 2015 +0100
-
- 8139cp: Reduce duplicate csum/tso code in cp_start_xmit()
-
- We calculate the value of the opts1 descriptor field in three different
- places. With two different behaviours when given an invalid packet to
- be checksummed — none of them correct. Sort that out.
-
- Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
- Signed-off-by: David S. Miller <davem@davemloft.net>
-
-commit a3b804043f490aeec57d8ca5baccdd35e6250857
-Author: David Woodhouse <David.Woodhouse@intel.com>
-Date: Wed Sep 23 09:44:38 2015 +0100
-
- 8139cp: Fix TSO/scatter-gather descriptor setup
-
- When sending a TSO frame in multiple buffers, we were neglecting to set
- the first descriptor up in TSO mode.
-
- Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
- Signed-off-by: David S. Miller <davem@davemloft.net>
-
-commit 26b0bad6ac3a0167792dc4ffb276c29bc597d239
-Author: David Woodhouse <David.Woodhouse@intel.com>
-Date: Wed Sep 23 09:44:06 2015 +0100
-
- 8139cp: Fix tx_queued debug message to print correct slot numbers
-
- After a certain amount of staring at the debug output of this driver, I
- realised it was lying to me.
-
- Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
- Signed-off-by: David S. Miller <davem@davemloft.net>
-
-commit aaa0062ecf4877a26dea66bee1039c6eaf906c94
-Author: David Woodhouse <David.Woodhouse@intel.com>
-Date: Wed Sep 23 09:43:41 2015 +0100
-
- 8139cp: Do not re-enable RX interrupts in cp_tx_timeout()
-
- If an RX interrupt was already received but NAPI has not yet run when
- the RX timeout happens, we end up in cp_tx_timeout() with RX interrupts
- already disabled. Blindly re-enabling them will cause an IRQ storm.
-
- (This is made particularly horrid by the fact that cp_interrupt() always
- returns that it's handled the interrupt, even when it hasn't actually
- done anything. If it didn't do that, the core IRQ code would have
- detected the storm and handled it, I'd have had a clear smoking gun
- backtrace instead of just a spontaneously resetting router, and I'd have
- at *least* two days of my life back. Changing the return value of
- cp_interrupt() will be argued about under separate cover.)
-
- Unconditionally leave RX interrupts disabled after the reset, and
- schedule NAPI to check the receive ring and re-enable them.
-
- Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
- Signed-off-by: David S. Miller <davem@davemloft.net>
-
-commit 7a8a8e75d505147358b225173e890ada43a267e2
-Author: David Woodhouse <dwmw2@infradead.org>
-Date: Fri Sep 18 00:21:54 2015 +0100
-
- 8139cp: Call __cp_set_rx_mode() from cp_tx_timeout()
-
- Unless we reset the RX config, on real hardware I don't seem to receive
- any packets after a TX timeout.
-
- Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
- Signed-off-by: David S. Miller <davem@davemloft.net>
-
-commit fc27bd115b334e3ebdc682a42a47c3aea2566dcc
-Author: David Woodhouse <dwmw2@infradead.org>
-Date: Fri Sep 18 00:19:08 2015 +0100
-
- 8139cp: Use dev_kfree_skb_any() instead of dev_kfree_skb() in cp_clean_rings()
-
- This can be called from cp_tx_timeout() with interrupts disabled.
- Spotted by Francois Romieu <romieu@fr.zoreil.com>
-
- Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
- Signed-off-by: David S. Miller <davem@davemloft.net>
---- a/drivers/net/ethernet/realtek/8139cp.c
-+++ b/drivers/net/ethernet/realtek/8139cp.c
-@@ -157,6 +157,7 @@ enum {
- NWayAdvert = 0x66, /* MII ADVERTISE */
- NWayLPAR = 0x68, /* MII LPA */
- NWayExpansion = 0x6A, /* MII Expansion */
-+ TxDmaOkLowDesc = 0x82, /* Low 16 bit address of a Tx descriptor. */
- Config5 = 0xD8, /* Config5 */
- TxPoll = 0xD9, /* Tell chip to check Tx descriptors for work */
- RxMaxSize = 0xDA, /* Max size of an Rx packet (8169 only) */
-@@ -341,6 +342,7 @@ struct cp_private {
- unsigned tx_tail;
- struct cp_desc *tx_ring;
- struct sk_buff *tx_skb[CP_TX_RING_SIZE];
-+ u32 tx_opts[CP_TX_RING_SIZE];
-
- unsigned rx_buf_sz;
- unsigned wol_enabled : 1; /* Is Wake-on-LAN enabled? */
-@@ -665,7 +667,7 @@ static void cp_tx (struct cp_private *cp
- BUG_ON(!skb);
-
- dma_unmap_single(&cp->pdev->dev, le64_to_cpu(txd->addr),
-- le32_to_cpu(txd->opts1) & 0xffff,
-+ cp->tx_opts[tx_tail] & 0xffff,
- PCI_DMA_TODEVICE);
-
- if (status & LastFrag) {
-@@ -733,7 +735,7 @@ static netdev_tx_t cp_start_xmit (struct
- {
- struct cp_private *cp = netdev_priv(dev);
- unsigned entry;
-- u32 eor, flags;
-+ u32 eor, opts1;
- unsigned long intr_flags;
- __le32 opts2;
- int mss = 0;
-@@ -753,6 +755,21 @@ static netdev_tx_t cp_start_xmit (struct
- mss = skb_shinfo(skb)->gso_size;
-
- opts2 = cpu_to_le32(cp_tx_vlan_tag(skb));
-+ opts1 = DescOwn;
-+ if (mss)
-+ opts1 |= LargeSend | ((mss & MSSMask) << MSSShift);
-+ else if (skb->ip_summed == CHECKSUM_PARTIAL) {
-+ const struct iphdr *ip = ip_hdr(skb);
-+ if (ip->protocol == IPPROTO_TCP)
-+ opts1 |= IPCS | TCPCS;
-+ else if (ip->protocol == IPPROTO_UDP)
-+ opts1 |= IPCS | UDPCS;
-+ else {
-+ WARN_ONCE(1,
-+ "Net bug: asked to checksum invalid Legacy IP packet\n");
-+ goto out_dma_error;
-+ }
-+ }
-
- if (skb_shinfo(skb)->nr_frags == 0) {
- struct cp_desc *txd = &cp->tx_ring[entry];
-@@ -768,31 +785,20 @@ static netdev_tx_t cp_start_xmit (struct
- txd->addr = cpu_to_le64(mapping);
- wmb();
-
-- flags = eor | len | DescOwn | FirstFrag | LastFrag;
--
-- if (mss)
-- flags |= LargeSend | ((mss & MSSMask) << MSSShift);
-- else if (skb->ip_summed == CHECKSUM_PARTIAL) {
-- const struct iphdr *ip = ip_hdr(skb);
-- if (ip->protocol == IPPROTO_TCP)
-- flags |= IPCS | TCPCS;
-- else if (ip->protocol == IPPROTO_UDP)
-- flags |= IPCS | UDPCS;
-- else
-- WARN_ON(1); /* we need a WARN() */
-- }
-+ opts1 |= eor | len | FirstFrag | LastFrag;
-
-- txd->opts1 = cpu_to_le32(flags);
-+ txd->opts1 = cpu_to_le32(opts1);
- wmb();
-
- cp->tx_skb[entry] = skb;
-- entry = NEXT_TX(entry);
-+ cp->tx_opts[entry] = opts1;
-+ netif_dbg(cp, tx_queued, cp->dev, "tx queued, slot %d, skblen %d\n",
-+ entry, skb->len);
- } else {
- struct cp_desc *txd;
-- u32 first_len, first_eor;
-+ u32 first_len, first_eor, ctrl;
- dma_addr_t first_mapping;
- int frag, first_entry = entry;
-- const struct iphdr *ip = ip_hdr(skb);
-
- /* We must give this initial chunk to the device last.
- * Otherwise we could race with the device.
-@@ -805,14 +811,14 @@ static netdev_tx_t cp_start_xmit (struct
- goto out_dma_error;
-
- cp->tx_skb[entry] = skb;
-- entry = NEXT_TX(entry);
-
- for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) {
- const skb_frag_t *this_frag = &skb_shinfo(skb)->frags[frag];
- u32 len;
-- u32 ctrl;
- dma_addr_t mapping;
-
-+ entry = NEXT_TX(entry);
-+
- len = skb_frag_size(this_frag);
- mapping = dma_map_single(&cp->pdev->dev,
- skb_frag_address(this_frag),
-@@ -824,19 +830,7 @@ static netdev_tx_t cp_start_xmit (struct
-
- eor = (entry == (CP_TX_RING_SIZE - 1)) ? RingEnd : 0;
-
-- ctrl = eor | len | DescOwn;
--
-- if (mss)
-- ctrl |= LargeSend |
-- ((mss & MSSMask) << MSSShift);
-- else if (skb->ip_summed == CHECKSUM_PARTIAL) {
-- if (ip->protocol == IPPROTO_TCP)
-- ctrl |= IPCS | TCPCS;
-- else if (ip->protocol == IPPROTO_UDP)
-- ctrl |= IPCS | UDPCS;
-- else
-- BUG();
-- }
-+ ctrl = opts1 | eor | len;
-
- if (frag == skb_shinfo(skb)->nr_frags - 1)
- ctrl |= LastFrag;
-@@ -849,8 +843,8 @@ static netdev_tx_t cp_start_xmit (struct
- txd->opts1 = cpu_to_le32(ctrl);
- wmb();
-
-+ cp->tx_opts[entry] = ctrl;
- cp->tx_skb[entry] = skb;
-- entry = NEXT_TX(entry);
- }
-
- txd = &cp->tx_ring[first_entry];
-@@ -858,27 +852,17 @@ static netdev_tx_t cp_start_xmit (struct
- txd->addr = cpu_to_le64(first_mapping);
- wmb();
-
-- if (skb->ip_summed == CHECKSUM_PARTIAL) {
-- if (ip->protocol == IPPROTO_TCP)
-- txd->opts1 = cpu_to_le32(first_eor | first_len |
-- FirstFrag | DescOwn |
-- IPCS | TCPCS);
-- else if (ip->protocol == IPPROTO_UDP)
-- txd->opts1 = cpu_to_le32(first_eor | first_len |
-- FirstFrag | DescOwn |
-- IPCS | UDPCS);
-- else
-- BUG();
-- } else
-- txd->opts1 = cpu_to_le32(first_eor | first_len |
-- FirstFrag | DescOwn);
-+ ctrl = opts1 | first_eor | first_len | FirstFrag;
-+ txd->opts1 = cpu_to_le32(ctrl);
- wmb();
-+
-+ cp->tx_opts[first_entry] = ctrl;
-+ netif_dbg(cp, tx_queued, cp->dev, "tx queued, slots %d-%d, skblen %d\n",
-+ first_entry, entry, skb->len);
- }
-- cp->tx_head = entry;
-+ cp->tx_head = NEXT_TX(entry);
-
- netdev_sent_queue(dev, skb->len);
-- netif_dbg(cp, tx_queued, cp->dev, "tx queued, slot %d, skblen %d\n",
-- entry, skb->len);
- if (TX_BUFFS_AVAIL(cp) <= (MAX_SKB_FRAGS + 1))
- netif_stop_queue(dev);
-
-@@ -1115,6 +1099,7 @@ static int cp_init_rings (struct cp_priv
- {
- memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE);
- cp->tx_ring[CP_TX_RING_SIZE - 1].opts1 = cpu_to_le32(RingEnd);
-+ memset(cp->tx_opts, 0, sizeof(cp->tx_opts));
-
- cp_init_rings_index(cp);
-
-@@ -1151,7 +1136,7 @@ static void cp_clean_rings (struct cp_pr
- desc = cp->rx_ring + i;
- dma_unmap_single(&cp->pdev->dev,le64_to_cpu(desc->addr),
- cp->rx_buf_sz, PCI_DMA_FROMDEVICE);
-- dev_kfree_skb(cp->rx_skb[i]);
-+ dev_kfree_skb_any(cp->rx_skb[i]);
- }
- }
-
-@@ -1164,7 +1149,7 @@ static void cp_clean_rings (struct cp_pr
- le32_to_cpu(desc->opts1) & 0xffff,
- PCI_DMA_TODEVICE);
- if (le32_to_cpu(desc->opts1) & LastFrag)
-- dev_kfree_skb(skb);
-+ dev_kfree_skb_any(skb);
- cp->dev->stats.tx_dropped++;
- }
- }
-@@ -1172,6 +1157,7 @@ static void cp_clean_rings (struct cp_pr
-
- memset(cp->rx_ring, 0, sizeof(struct cp_desc) * CP_RX_RING_SIZE);
- memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE);
-+ memset(cp->tx_opts, 0, sizeof(cp->tx_opts));
-
- memset(cp->rx_skb, 0, sizeof(struct sk_buff *) * CP_RX_RING_SIZE);
- memset(cp->tx_skb, 0, sizeof(struct sk_buff *) * CP_TX_RING_SIZE);
-@@ -1249,7 +1235,7 @@ static void cp_tx_timeout(struct net_dev
- {
- struct cp_private *cp = netdev_priv(dev);
- unsigned long flags;
-- int rc;
-+ int rc, i;
-
- netdev_warn(dev, "Transmit timeout, status %2x %4x %4x %4x\n",
- cpr8(Cmd), cpr16(CpCmd),
-@@ -1257,13 +1243,26 @@ static void cp_tx_timeout(struct net_dev
-
- spin_lock_irqsave(&cp->lock, flags);
-
-+ netif_dbg(cp, tx_err, cp->dev, "TX ring head %d tail %d desc %x\n",
-+ cp->tx_head, cp->tx_tail, cpr16(TxDmaOkLowDesc));
-+ for (i = 0; i < CP_TX_RING_SIZE; i++) {
-+ netif_dbg(cp, tx_err, cp->dev,
-+ "TX slot %d @%p: %08x (%08x) %08x %llx %p\n",
-+ i, &cp->tx_ring[i], le32_to_cpu(cp->tx_ring[i].opts1),
-+ cp->tx_opts[i], le32_to_cpu(cp->tx_ring[i].opts2),
-+ le64_to_cpu(cp->tx_ring[i].addr),
-+ cp->tx_skb[i]);
-+ }
-+
- cp_stop_hw(cp);
- cp_clean_rings(cp);
- rc = cp_init_rings(cp);
- cp_start_hw(cp);
-- cp_enable_irq(cp);
-+ __cp_set_rx_mode(dev);
-+ cpw16_f(IntrMask, cp_norx_intr_mask);
-
- netif_wake_queue(dev);
-+ napi_schedule(&cp->napi);
-
- spin_unlock_irqrestore(&cp->lock, flags);
- }
+++ /dev/null
-Register switch connected to srab
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -17,6 +17,7 @@
- #include <linux/phy_fixed.h>
- #include <linux/interrupt.h>
- #include <linux/dma-mapping.h>
-+#include <linux/platform_data/b53.h>
- #include <bcm47xx_nvram.h>
-
- static const struct bcma_device_id bgmac_bcma_tbl[] = {
-@@ -1538,6 +1539,17 @@ static void bgmac_mii_unregister(struct
- mdiobus_free(mii_bus);
- }
-
-+static struct b53_platform_data bgmac_b53_pdata = {
-+};
-+
-+static struct platform_device bgmac_b53_dev = {
-+ .name = "b53-srab-switch",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &bgmac_b53_pdata,
-+ },
-+};
-+
- /**************************************************
- * BCMA bus ops
- **************************************************/
-@@ -1671,6 +1683,16 @@ static int bgmac_probe(struct bcma_devic
- net_dev->hw_features = net_dev->features;
- net_dev->vlan_features = net_dev->features;
-
-+ if ((ci->id == BCMA_CHIP_ID_BCM4707 ||
-+ ci->id == BCMA_CHIP_ID_BCM53018) &&
-+ !bgmac_b53_pdata.regs) {
-+ bgmac_b53_pdata.regs = ioremap_nocache(0x18007000, 0x1000);
-+
-+ err = platform_device_register(&bgmac_b53_dev);
-+ if (!err)
-+ bgmac->b53_device = &bgmac_b53_dev;
-+ }
-+
- err = register_netdev(bgmac->net_dev);
- if (err) {
- bgmac_err(bgmac, "Cannot register net device\n");
-@@ -1697,6 +1719,10 @@ static void bgmac_remove(struct bcma_dev
- {
- struct bgmac *bgmac = bcma_get_drvdata(core);
-
-+ if (bgmac->b53_device)
-+ platform_device_unregister(&bgmac_b53_dev);
-+ bgmac->b53_device = NULL;
-+
- unregister_netdev(bgmac->net_dev);
- bgmac_mii_unregister(bgmac);
- netif_napi_del(&bgmac->napi);
---- a/drivers/net/ethernet/broadcom/bgmac.h
-+++ b/drivers/net/ethernet/broadcom/bgmac.h
-@@ -462,6 +462,9 @@ struct bgmac {
- bool has_robosw;
-
- bool loopback;
-+
-+ /* platform device for associated switch */
-+ struct platform_device *b53_device;
- };
-
- static inline u32 bgmac_read(struct bgmac *bgmac, u16 offset)
+++ /dev/null
---- a/drivers/net/usb/hso.c
-+++ b/drivers/net/usb/hso.c
-@@ -468,6 +468,7 @@ static const struct usb_device_id hso_id
- {USB_DEVICE(0x0af0, 0x8900)},
- {USB_DEVICE(0x0af0, 0x9000)},
- {USB_DEVICE(0x0af0, 0x9200)}, /* Option GTM671WFS */
-+ {USB_DEVICE(0x0af0, 0x9300)}, /* GTM 66xxWFS */
- {USB_DEVICE(0x0af0, 0xd035)},
- {USB_DEVICE(0x0af0, 0xd055)},
- {USB_DEVICE(0x0af0, 0xd155)},
---- a/drivers/usb/storage/unusual_devs.h
-+++ b/drivers/usb/storage/unusual_devs.h
-@@ -1330,6 +1330,12 @@ UNUSUAL_DEV( 0x0af0, 0x8304, 0x0000, 0x0
- USB_SC_DEVICE, USB_PR_DEVICE, NULL,
- 0 ),
-
-+UNUSUAL_DEV( 0x0af0, 0x9300, 0x0000, 0x0000,
-+ "Option",
-+ "Globetrotter 66xxWFS SD-Card",
-+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
-+ 0 ),
-+
- UNUSUAL_DEV( 0x0af0, 0xc100, 0x0000, 0x0000,
- "Option",
- "GI 070x SD-Card",
+++ /dev/null
---- a/drivers/pci/Kconfig
-+++ b/drivers/pci/Kconfig
-@@ -58,6 +58,12 @@ config XEN_PCIDEV_FRONTEND
- The PCI device frontend driver allows the kernel to import arbitrary
- PCI devices from a PCI backend to support PCI driver domains.
-
-+config PCI_DISABLE_COMMON_QUIRKS
-+ bool "PCI disable common quirks"
-+ depends on PCI
-+ help
-+ If you don't know what to do here, say N.
-+
- config HT_IRQ
- bool "Interrupts on hypertransport devices"
- default y
---- a/drivers/pci/quirks.c
-+++ b/drivers/pci/quirks.c
-@@ -41,6 +41,7 @@ static void quirk_mmio_always_on(struct
- DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on);
-
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
- /* The Mellanox Tavor device gives false positive parity errors
- * Mark this device with a broken_parity_status, to allow
- * PCI scanning code to "skip" this now blacklisted device.
-@@ -2929,6 +2930,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
-
-+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
-
- /*
- * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum. To
-@@ -2985,6 +2987,8 @@ static void fixup_debug_report(struct pc
- }
- }
-
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
-+
- /*
- * Some BIOS implementations leave the Intel GPU interrupts enabled,
- * even though no one is handling them (f.e. i915 driver is never loaded).
-@@ -3019,6 +3023,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
-
-+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
-+
- /*
- * PCI devices which are on Intel chips can skip the 10ms delay
- * before entering D3 mode.
+++ /dev/null
-
---- a/drivers/usb/host/pci-quirks.c
-+++ b/drivers/usb/host/pci-quirks.c
-@@ -98,6 +98,8 @@ struct amd_chipset_type {
- u8 rev;
- };
-
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
-+
- static struct amd_chipset_info {
- struct pci_dev *nb_dev;
- struct pci_dev *smbus_dev;
-@@ -462,6 +464,10 @@ void usb_amd_dev_put(void)
- }
- EXPORT_SYMBOL_GPL(usb_amd_dev_put);
-
-+#endif /* CONFIG_PCI_DISABLE_COMMON_QUIRKS */
-+
-+#if IS_ENABLED(CONFIG_USB_UHCI_HCD)
-+
- /*
- * Make sure the controller is completely inactive, unable to
- * generate interrupts or do DMA.
-@@ -541,8 +547,17 @@ reset_needed:
- uhci_reset_hc(pdev, base);
- return 1;
- }
-+#else
-+int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
-+{
-+ return 0;
-+}
-+
-+#endif
- EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
-
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
-+
- static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
- {
- u16 cmd;
-@@ -1103,3 +1118,4 @@ static void quirk_usb_early_handoff(stru
- }
- DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff);
-+#endif
---- a/drivers/usb/host/pci-quirks.h
-+++ b/drivers/usb/host/pci-quirks.h
-@@ -4,6 +4,9 @@
- #ifdef CONFIG_PCI
- void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
- int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
-+#endif /* CONFIG_PCI */
-+
-+#if defined(CONFIG_PCI) && !defined(CONFIG_PCI_DISABLE_COMMON_QUIRKS)
- int usb_amd_find_chipset_info(void);
- int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
- bool usb_amd_hang_symptom_quirk(void);
-@@ -16,11 +19,24 @@ void usb_disable_xhci_ports(struct pci_d
- void sb800_prefetch(struct device *dev, int on);
- #else
- struct pci_dev;
-+static inline int usb_amd_find_chipset_info(void)
-+{
-+ return 0;
-+}
-+static inline bool usb_amd_hang_symptom_quirk(void)
-+{
-+ return false;
-+}
-+static inline bool usb_amd_prefetch_quirk(void)
-+{
-+ return false;
-+}
- static inline void usb_amd_quirk_pll_disable(void) {}
- static inline void usb_amd_quirk_pll_enable(void) {}
- static inline void usb_amd_dev_put(void) {}
- static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
- static inline void sb800_prefetch(struct device *dev, int on) {}
--#endif /* CONFIG_PCI */
-+static inline void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev) {}
-+#endif
-
- #endif /* __LINUX_USB_PCI_QUIRKS_H */
---- a/include/linux/usb/hcd.h
-+++ b/include/linux/usb/hcd.h
-@@ -445,7 +445,14 @@ extern int usb_hcd_pci_probe(struct pci_
- extern void usb_hcd_pci_remove(struct pci_dev *dev);
- extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
-
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
- extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
-+#else
-+static inline int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev)
-+{
-+ return 0;
-+}
-+#endif
-
- #ifdef CONFIG_PM
- extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
+++ /dev/null
---- a/drivers/usb/dwc2/Kconfig
-+++ b/drivers/usb/dwc2/Kconfig
-@@ -1,6 +1,6 @@
- config USB_DWC2
-- bool "DesignWare USB2 DRD Core Support"
-- depends on USB
-+ tristate "DesignWare USB2 DRD Core Support"
-+ depends on USB || USB_GADGET
- help
- Say Y here if your system has a Dual Role Hi-Speed USB
- controller based on the DesignWare HSOTG IP Core.
-@@ -10,49 +10,61 @@ config USB_DWC2
- bus interface module (if you have a PCI bus system) will be
- called dwc2_pci.ko, and the platform interface module (for
- controllers directly connected to the CPU) will be called
-- dwc2_platform.ko. For gadget mode, there will be a single
-- module called dwc2_gadget.ko.
--
-- NOTE: The s3c-hsotg driver is now renamed to dwc2_gadget. The
-- host and gadget drivers are still currently separate drivers.
-- There are plans to merge the dwc2_gadget driver with the dwc2
-- host driver in the near future to create a dual-role driver.
-+ dwc2_platform.ko. For all modes(host, gadget and dual-role), there
-+ will be an additional module named dwc2.ko.
-
- if USB_DWC2
-
-+choice
-+ bool "DWC2 Mode Selection"
-+ default USB_DWC2_DUAL_ROLE if (USB && USB_GADGET)
-+ default USB_DWC2_HOST if (USB && !USB_GADGET)
-+ default USB_DWC2_PERIPHERAL if (!USB && USB_GADGET)
-+
- config USB_DWC2_HOST
-- tristate "Host only mode"
-+ bool "Host only mode"
- depends on USB
- help
- The Designware USB2.0 high-speed host controller
-- integrated into many SoCs.
-+ integrated into many SoCs. Select this option if you want the
-+ driver to operate in Host-only mode.
-
--config USB_DWC2_PLATFORM
-- bool "DWC2 Platform"
-- depends on USB_DWC2_HOST
-- default USB_DWC2_HOST
-+comment "Gadget/Dual-role mode requires USB Gadget support to be enabled"
-+
-+config USB_DWC2_PERIPHERAL
-+ bool "Gadget only mode"
-+ depends on USB_GADGET=y || USB_GADGET=USB_DWC2
-+ help
-+ The Designware USB2.0 high-speed gadget controller
-+ integrated into many SoCs. Select this option if you want the
-+ driver to operate in Peripheral-only mode. This option requires
-+ USB_GADGET to be enabled.
-+
-+config USB_DWC2_DUAL_ROLE
-+ bool "Dual Role mode"
-+ depends on (USB=y || USB=USB_DWC2) && (USB_GADGET=y || USB_GADGET=USB_DWC2)
- help
-- The Designware USB2.0 platform interface module for
-- controllers directly connected to the CPU. This is only
-- used for host mode.
-+ Select this option if you want the driver to work in a dual-role
-+ mode. In this mode both host and gadget features are enabled, and
-+ the role will be determined by the cable that gets plugged-in. This
-+ option requires USB_GADGET to be enabled.
-+endchoice
-+
-+config USB_DWC2_PLATFORM
-+ tristate "DWC2 Platform"
-+ default USB_DWC2_HOST || USB_DWC2_PERIPHERAL
-+ help
-+ The Designware USB2.0 platform interface module for
-+ controllers directly connected to the CPU.
-
- config USB_DWC2_PCI
-- bool "DWC2 PCI"
-+ tristate "DWC2 PCI"
- depends on USB_DWC2_HOST && PCI
- default USB_DWC2_HOST
- help
- The Designware USB2.0 PCI interface module for controllers
- connected to a PCI bus. This is only used for host mode.
-
--comment "Gadget mode requires USB Gadget support to be enabled"
--
--config USB_DWC2_PERIPHERAL
-- tristate "Gadget only mode"
-- depends on USB_GADGET
-- help
-- The Designware USB2.0 high-speed gadget controller
-- integrated into many SoCs.
--
- config USB_DWC2_DEBUG
- bool "Enable Debugging Messages"
- help
---- a/drivers/usb/dwc2/Makefile
-+++ b/drivers/usb/dwc2/Makefile
-@@ -1,28 +1,28 @@
- ccflags-$(CONFIG_USB_DWC2_DEBUG) += -DDEBUG
- ccflags-$(CONFIG_USB_DWC2_VERBOSE) += -DVERBOSE_DEBUG
-
--obj-$(CONFIG_USB_DWC2_HOST) += dwc2.o
-+obj-$(CONFIG_USB_DWC2) += dwc2.o
- dwc2-y := core.o core_intr.o
--dwc2-y += hcd.o hcd_intr.o
--dwc2-y += hcd_queue.o hcd_ddma.o
-+
-+ifneq ($(filter y,$(CONFIG_USB_DWC2_HOST) $(CONFIG_USB_DWC2_DUAL_ROLE)),)
-+ dwc2-y += hcd.o hcd_intr.o
-+ dwc2-y += hcd_queue.o hcd_ddma.o
-+endif
-+
-+ifneq ($(filter y,$(CONFIG_USB_DWC2_PERIPHERAL) $(CONFIG_USB_DWC2_DUAL_ROLE)),)
-+ dwc2-y += gadget.o
-+endif
-
- # NOTE: The previous s3c-hsotg peripheral mode only driver has been moved to
- # this location and renamed gadget.c. When building for dynamically linked
--# modules, dwc2_gadget.ko will get built for peripheral mode. For host mode,
--# the core module will be dwc2.ko, the PCI bus interface module will called
--# dwc2_pci.ko and the platform interface module will be called dwc2_platform.ko.
--# At present the host and gadget driver will be separate drivers, but there
--# are plans in the near future to create a dual-role driver.
-+# modules, dwc2.ko will get built for host mode, peripheral mode, and dual-role
-+# mode. The PCI bus interface module will called dwc2_pci.ko and the platform
-+# interface module will be called dwc2_platform.ko.
-
- ifneq ($(CONFIG_USB_DWC2_PCI),)
-- obj-$(CONFIG_USB_DWC2_HOST) += dwc2_pci.o
-+ obj-$(CONFIG_USB_DWC2) += dwc2_pci.o
- dwc2_pci-y := pci.o
- endif
-
--ifneq ($(CONFIG_USB_DWC2_PLATFORM),)
-- obj-$(CONFIG_USB_DWC2_HOST) += dwc2_platform.o
-- dwc2_platform-y := platform.o
--endif
--
--obj-$(CONFIG_USB_DWC2_PERIPHERAL) += dwc2_gadget.o
--dwc2_gadget-y := gadget.o
-+obj-$(CONFIG_USB_DWC2_PLATFORM) += dwc2_platform.o
-+dwc2_platform-y := platform.o
+++ /dev/null
---- a/drivers/leds/trigger/Kconfig
-+++ b/drivers/leds/trigger/Kconfig
-@@ -108,4 +108,11 @@ config LEDS_TRIGGER_CAMERA
- This enables direct flash/torch on/off by the driver, kernel space.
- If unsure, say Y.
-
-+config LEDS_TRIGGER_NETDEV
-+ tristate "LED Netdev Trigger"
-+ depends on NET && LEDS_TRIGGERS
-+ help
-+ This allows LEDs to be controlled by network device activity.
-+ If unsure, say Y.
-+
- endif # LEDS_TRIGGERS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -62,3 +62,4 @@ obj-$(CONFIG_LEDS_DAC124S085) += leds-d
-
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGERS) += trigger/
-+obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o
+++ /dev/null
-From 52cfd51cdf6a6e14d4fb270c6343abac3bac00f4 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Fri, 12 Dec 2014 13:38:33 +0100
-Subject: [PATCH] libata: add ledtrig support
-To: linux-ide@vger.kernel.org,
- Tejun Heo <tj@kernel.org>
-
-This adds a LED trigger for each ATA port indicating disk activity.
-
-As this is needed only on specific platforms (NAS SoCs and such),
-these platforms should define ARCH_WANTS_LIBATA_LEDS if there
-are boards with LED(s) intended to indicate ATA disk activity and
-need the OS to take care of that.
-In that way, if not selected, LED trigger support not will be
-included in libata-core and both, codepaths and structures remain
-untouched.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/ata/Kconfig | 16 ++++++++++++++++
- drivers/ata/libata-core.c | 41 +++++++++++++++++++++++++++++++++++++++++
- include/linux/libata.h | 9 +++++++++
- 3 files changed, 66 insertions(+)
-
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -46,6 +46,22 @@ config ATA_VERBOSE_ERROR
-
- If unsure, say Y.
-
-+config ARCH_WANT_LIBATA_LEDS
-+ bool
-+
-+config ATA_LEDS
-+ bool "support ATA port LED triggers"
-+ depends on ARCH_WANT_LIBATA_LEDS
-+ select NEW_LEDS
-+ select LEDS_CLASS
-+ select LEDS_TRIGGERS
-+ default y
-+ help
-+ This option adds a LED trigger for each registered ATA port.
-+ It is used to drive disk activity leds connected via GPIO.
-+
-+ If unsure, say N.
-+
- config ATA_ACPI
- bool "ATA ACPI Support"
- depends on ACPI && PCI
---- a/drivers/ata/libata-core.c
-+++ b/drivers/ata/libata-core.c
-@@ -725,6 +725,19 @@ u64 ata_tf_read_block(struct ata_taskfil
- return block;
- }
-
-+#ifdef CONFIG_ATA_LEDS
-+#define LIBATA_BLINK_DELAY 20 /* ms */
-+static inline void ata_led_act(struct ata_port *ap)
-+{
-+ unsigned long led_delay = LIBATA_BLINK_DELAY;
-+
-+ if (unlikely(!ap->ledtrig))
-+ return;
-+
-+ led_trigger_blink_oneshot(ap->ledtrig, &led_delay, &led_delay, 0);
-+}
-+#endif
-+
- /**
- * ata_build_rw_tf - Build ATA taskfile for given read/write request
- * @tf: Target ATA taskfile
-@@ -4800,6 +4813,9 @@ static struct ata_queued_cmd *ata_qc_new
- break;
- }
- }
-+#ifdef CONFIG_ATA_LEDS
-+ ata_led_act(ap);
-+#endif
-
- return qc;
- }
-@@ -5710,6 +5726,9 @@ struct ata_port *ata_port_alloc(struct a
- ap->stats.unhandled_irq = 1;
- ap->stats.idle_irq = 1;
- #endif
-+#ifdef CONFIG_ATA_LEDS
-+ ap->ledtrig = kzalloc(sizeof(struct led_trigger), GFP_KERNEL);
-+#endif
- ata_sff_port_init(ap);
-
- return ap;
-@@ -5731,6 +5750,12 @@ static void ata_host_release(struct devi
-
- kfree(ap->pmp_link);
- kfree(ap->slave_link);
-+#ifdef CONFIG_ATA_LEDS
-+ if (ap->ledtrig) {
-+ led_trigger_unregister(ap->ledtrig);
-+ kfree(ap->ledtrig);
-+ };
-+#endif
- kfree(ap);
- host->ports[i] = NULL;
- }
-@@ -6177,7 +6202,23 @@ int ata_host_register(struct ata_host *h
- host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
- host->ports[i]->local_port_no = i + 1;
- }
-+#ifdef CONFIG_ATA_LEDS
-+ for (i = 0; i < host->n_ports; i++) {
-+ if (unlikely(!host->ports[i]->ledtrig))
-+ continue;
-
-+ snprintf(host->ports[i]->ledtrig_name,
-+ sizeof(host->ports[i]->ledtrig_name), "ata%u",
-+ host->ports[i]->print_id);
-+
-+ host->ports[i]->ledtrig->name = host->ports[i]->ledtrig_name;
-+
-+ if (led_trigger_register(host->ports[i]->ledtrig)) {
-+ kfree(host->ports[i]->ledtrig);
-+ host->ports[i]->ledtrig = NULL;
-+ }
-+ }
-+#endif
- /* Create associated sysfs transport objects */
- for (i = 0; i < host->n_ports; i++) {
- rc = ata_tport_add(host->dev,host->ports[i]);
---- a/include/linux/libata.h
-+++ b/include/linux/libata.h
-@@ -38,6 +38,9 @@
- #include <linux/acpi.h>
- #include <linux/cdrom.h>
- #include <linux/sched.h>
-+#ifdef CONFIG_ATA_LEDS
-+#include <linux/leds.h>
-+#endif
-
- /*
- * Define if arch has non-standard setup. This is a _PCI_ standard
-@@ -874,6 +877,12 @@ struct ata_port {
- #ifdef CONFIG_ATA_ACPI
- struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */
- #endif
-+
-+#ifdef CONFIG_ATA_LEDS
-+ struct led_trigger *ledtrig;
-+ char ledtrig_name[8];
-+#endif
-+
- /* owned by EH */
- u8 sector_buf[ATA_SECT_SIZE] ____cacheline_aligned;
- };
+++ /dev/null
---- a/drivers/rtc/Kconfig
-+++ b/drivers/rtc/Kconfig
-@@ -979,6 +979,15 @@ config RTC_DRV_NUC900
- If you say yes here you get support for the RTC subsystem of the
- NUC910/NUC920 used in embedded systems.
-
-+config RTC_DRV_RTC7301
-+ tristate "Epson RTC-7301 SF/DG"
-+ help
-+ If you say Y here you will get support for the
-+ Epson RTC-7301 SF/DG RTC chips.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-7301.
-+
- comment "on-CPU RTC drivers"
-
- config RTC_DRV_DAVINCI
---- a/drivers/rtc/Makefile
-+++ b/drivers/rtc/Makefile
-@@ -115,6 +115,7 @@ obj-$(CONFIG_RTC_DRV_RP5C01) += rtc-rp5c
- obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o
- obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o
- obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o
-+obj-$(CONFIG_RTC_DRV_RTC7301) += rtc-rtc7301.o
- obj-$(CONFIG_RTC_DRV_RV3029C2) += rtc-rv3029c2.o
- obj-$(CONFIG_RTC_DRV_RX4581) += rtc-rx4581.o
- obj-$(CONFIG_RTC_DRV_RX8025) += rtc-rx8025.o
---- /dev/null
-+++ b/drivers/rtc/rtc-rtc7301.c
-@@ -0,0 +1,219 @@
-+/*
-+ * Driver for Epson RTC-7301SF/DG
-+ *
-+ * Copyright (C) 2009 Jose Vasconcellos
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/rtc.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/delay.h>
-+#include <linux/bcd.h>
-+
-+#define RTC_NAME "rtc7301"
-+#define RTC_VERSION "0.1"
-+
-+/* Epson RTC-7301 register addresses */
-+#define RTC7301_SEC 0x00
-+#define RTC7301_SEC10 0x01
-+#define RTC7301_MIN 0x02
-+#define RTC7301_MIN10 0x03
-+#define RTC7301_HOUR 0x04
-+#define RTC7301_HOUR10 0x05
-+#define RTC7301_WEEKDAY 0x06
-+#define RTC7301_DAY 0x07
-+#define RTC7301_DAY10 0x08
-+#define RTC7301_MON 0x09
-+#define RTC7301_MON10 0x0A
-+#define RTC7301_YEAR 0x0B
-+#define RTC7301_YEAR10 0x0C
-+#define RTC7301_YEAR100 0x0D
-+#define RTC7301_YEAR1000 0x0E
-+#define RTC7301_CTRLREG 0x0F
-+
-+static uint8_t __iomem *rtc7301_base;
-+
-+#define read_reg(offset) (readb(rtc7301_base + offset) & 0xf)
-+#define write_reg(offset, data) writeb(data, rtc7301_base + (offset))
-+
-+#define rtc7301_isbusy() (read_reg(RTC7301_CTRLREG) & 1)
-+
-+static void rtc7301_init_settings(void)
-+{
-+ int i;
-+
-+ write_reg(RTC7301_CTRLREG, 2);
-+ write_reg(RTC7301_YEAR1000, 2);
-+ udelay(122);
-+
-+ /* bank 1 */
-+ write_reg(RTC7301_CTRLREG, 6);
-+ for (i=0; i<15; i++)
-+ write_reg(i, 0);
-+
-+ /* bank 2 */
-+ write_reg(RTC7301_CTRLREG, 14);
-+ for (i=0; i<15; i++)
-+ write_reg(i, 0);
-+ write_reg(RTC7301_CTRLREG, 0);
-+}
-+
-+static int rtc7301_get_datetime(struct device *dev, struct rtc_time *dt)
-+{
-+ int cnt;
-+ uint8_t buf[16];
-+
-+ cnt = 0;
-+ while (rtc7301_isbusy()) {
-+ udelay(244);
-+ if (cnt++ > 100) {
-+ dev_err(dev, "%s: timeout error %x\n", __func__, rtc7301_base[RTC7301_CTRLREG]);
-+ return -EIO;
-+ }
-+ }
-+
-+ for (cnt=0; cnt<16; cnt++)
-+ buf[cnt] = read_reg(cnt);
-+
-+ if (buf[RTC7301_SEC10] & 8) {
-+ dev_err(dev, "%s: RTC not set\n", __func__);
-+ return -EINVAL;
-+ }
-+
-+ memset(dt, 0, sizeof(*dt));
-+
-+ dt->tm_sec = buf[RTC7301_SEC] + buf[RTC7301_SEC10]*10;
-+ dt->tm_min = buf[RTC7301_MIN] + buf[RTC7301_MIN10]*10;
-+ dt->tm_hour = buf[RTC7301_HOUR] + buf[RTC7301_HOUR10]*10;
-+
-+ dt->tm_mday = buf[RTC7301_DAY] + buf[RTC7301_DAY10]*10;
-+ dt->tm_mon = buf[RTC7301_MON] + buf[RTC7301_MON10]*10 - 1;
-+ dt->tm_year = buf[RTC7301_YEAR] + buf[RTC7301_YEAR10]*10 +
-+ buf[RTC7301_YEAR100]*100 +
-+ ((buf[RTC7301_YEAR1000] & 3)*1000) - 1900;
-+
-+ /* the rtc device may contain illegal values on power up
-+ * according to the data sheet. make sure they are valid.
-+ */
-+
-+ return rtc_valid_tm(dt);
-+}
-+
-+static int rtc7301_set_datetime(struct device *dev, struct rtc_time *dt)
-+{
-+ int data;
-+
-+ data = dt->tm_year + 1900;
-+ if (data >= 2100 || data < 1900)
-+ return -EINVAL;
-+
-+ write_reg(RTC7301_CTRLREG, 2);
-+ udelay(122);
-+
-+ data = bin2bcd(dt->tm_sec);
-+ write_reg(RTC7301_SEC, data);
-+ write_reg(RTC7301_SEC10, (data >> 4));
-+
-+ data = bin2bcd(dt->tm_min);
-+ write_reg(RTC7301_MIN, data );
-+ write_reg(RTC7301_MIN10, (data >> 4));
-+
-+ data = bin2bcd(dt->tm_hour);
-+ write_reg(RTC7301_HOUR, data);
-+ write_reg(RTC7301_HOUR10, (data >> 4));
-+
-+ data = bin2bcd(dt->tm_mday);
-+ write_reg(RTC7301_DAY, data);
-+ write_reg(RTC7301_DAY10, (data>> 4));
-+
-+ data = bin2bcd(dt->tm_mon + 1);
-+ write_reg(RTC7301_MON, data);
-+ write_reg(RTC7301_MON10, (data >> 4));
-+
-+ data = bin2bcd(dt->tm_year % 100);
-+ write_reg(RTC7301_YEAR, data);
-+ write_reg(RTC7301_YEAR10, (data >> 4));
-+ data = bin2bcd((1900 + dt->tm_year) / 100);
-+ write_reg(RTC7301_YEAR100, data);
-+
-+ data = bin2bcd(dt->tm_wday);
-+ write_reg(RTC7301_WEEKDAY, data);
-+
-+ write_reg(RTC7301_CTRLREG, 0);
-+
-+ return 0;
-+}
-+
-+static const struct rtc_class_ops rtc7301_rtc_ops = {
-+ .read_time = rtc7301_get_datetime,
-+ .set_time = rtc7301_set_datetime,
-+};
-+
-+static int rtc7301_probe(struct platform_device *pdev)
-+{
-+ struct rtc_device *rtc;
-+ struct resource *res;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res)
-+ return -ENOENT;
-+
-+ rtc7301_base = ioremap_nocache(res->start, 0x1000 /*res->end - res->start + 1*/);
-+ if (!rtc7301_base)
-+ return -EINVAL;
-+
-+ rtc = rtc_device_register(RTC_NAME, &pdev->dev,
-+ &rtc7301_rtc_ops, THIS_MODULE);
-+ if (IS_ERR(rtc)) {
-+ iounmap(rtc7301_base);
-+ return PTR_ERR(rtc);
-+ }
-+
-+ platform_set_drvdata(pdev, rtc);
-+
-+ rtc7301_init_settings();
-+ return 0;
-+}
-+
-+static int rtc7301_remove(struct platform_device *pdev)
-+{
-+ struct rtc_device *rtc = platform_get_drvdata(pdev);
-+
-+ if (rtc)
-+ rtc_device_unregister(rtc);
-+ if (rtc7301_base)
-+ iounmap(rtc7301_base);
-+ return 0;
-+}
-+
-+static struct platform_driver rtc7301_driver = {
-+ .driver = {
-+ .name = RTC_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = rtc7301_probe,
-+ .remove = rtc7301_remove,
-+};
-+
-+static __init int rtc7301_init(void)
-+{
-+ return platform_driver_register(&rtc7301_driver);
-+}
-+module_init(rtc7301_init);
-+
-+static __exit void rtc7301_exit(void)
-+{
-+ platform_driver_unregister(&rtc7301_driver);
-+}
-+module_exit(rtc7301_exit);
-+
-+MODULE_DESCRIPTION("Epson 7301 RTC driver");
-+MODULE_AUTHOR("Jose Vasconcellos <jvasco@verizon.net>");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:" RTC_NAME);
-+MODULE_VERSION(RTC_VERSION);
+++ /dev/null
---- a/drivers/rtc/Kconfig
-+++ b/drivers/rtc/Kconfig
-@@ -567,6 +567,15 @@ config RTC_DRV_S5M
- This driver can also be built as a module. If so, the module
- will be called rtc-s5m.
-
-+config RTC_DRV_PT7C4338
-+ tristate "Pericom Technology Inc. PT7C4338 RTC"
-+ help
-+ If you say yes here you get support for the Pericom Technology
-+ Inc. PT7C4338 RTC chip.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called rtc-pt7c4338.
-+
- endif # I2C
-
- comment "SPI RTC drivers"
---- a/drivers/rtc/Makefile
-+++ b/drivers/rtc/Makefile
-@@ -106,6 +106,7 @@ obj-$(CONFIG_RTC_DRV_PL030) += rtc-pl030
- obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o
- obj-$(CONFIG_RTC_DRV_PM8XXX) += rtc-pm8xxx.o
- obj-$(CONFIG_RTC_DRV_PS3) += rtc-ps3.o
-+obj-$(CONFIG_RTC_DRV_PT7C4338) += rtc-pt7c4338.o
- obj-$(CONFIG_RTC_DRV_PUV3) += rtc-puv3.o
- obj-$(CONFIG_RTC_DRV_PXA) += rtc-pxa.o
- obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o
---- /dev/null
-+++ b/drivers/rtc/rtc-pt7c4338.c
-@@ -0,0 +1,216 @@
-+/*
-+ * Copyright 2010 Freescale Semiconductor, Inc.
-+ *
-+ * Author: Priyanka Jain <Priyanka.Jain@freescale.com>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+/*
-+ * This file provides Date & Time support (no alarms) for PT7C4338 chip.
-+ *
-+ * This file is based on drivers/rtc/rtc-ds1307.c
-+ *
-+ * PT7C4338 chip is manufactured by Pericom Technology Inc.
-+ * It is a serial real-time clock which provides
-+ * 1)Low-power clock/calendar.
-+ * 2)Programmable square-wave output.
-+ * It has 56 bytes of nonvolatile RAM.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/i2c.h>
-+#include <linux/rtc.h>
-+#include <linux/bcd.h>
-+
-+/* RTC register addresses */
-+#define PT7C4338_REG_SECONDS 0x00
-+#define PT7C4338_REG_MINUTES 0x01
-+#define PT7C4338_REG_HOURS 0x02
-+#define PT7C4338_REG_AMPM 0x02
-+#define PT7C4338_REG_DAY 0x03
-+#define PT7C4338_REG_DATE 0x04
-+#define PT7C4338_REG_MONTH 0x05
-+#define PT7C4338_REG_YEAR 0x06
-+#define PT7C4338_REG_CTRL_STAT 0x07
-+
-+/* RTC second register address bit */
-+#define PT7C4338_SEC_BIT_CH 0x80 /*Clock Halt (in Register 0)*/
-+
-+/* RTC control and status register bits */
-+#define PT7C4338_CTRL_STAT_BIT_RS0 0x1 /*Rate select 0*/
-+#define PT7C4338_CTRL_STAT_BIT_RS1 0x2 /*Rate select 1*/
-+#define PT7C4338_CTRL_STAT_BIT_SQWE 0x10 /*Square Wave Enable*/
-+#define PT7C4338_CTRL_STAT_BIT_OSF 0x20 /*Oscillator Stop Flag*/
-+#define PT7C4338_CTRL_STAT_BIT_OUT 0x80 /*Output Level Control*/
-+
-+static const struct i2c_device_id pt7c4338_id[] = {
-+ { "pt7c4338", 0 },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(i2c, pt7c4338_id);
-+
-+struct pt7c4338{
-+ struct i2c_client *client;
-+ struct rtc_device *rtc;
-+};
-+
-+static int pt7c4338_read_time(struct device *dev, struct rtc_time *time)
-+{
-+ struct i2c_client *client = to_i2c_client(dev);
-+ int ret;
-+ u8 buf[7];
-+ u8 year, month, day, hour, minute, second;
-+ u8 week, twelve_hr, am_pm;
-+
-+ ret = i2c_smbus_read_i2c_block_data(client,
-+ PT7C4338_REG_SECONDS, 7, buf);
-+ if (ret < 0)
-+ return ret;
-+ if (ret < 7)
-+ return -EIO;
-+
-+ second = buf[0];
-+ minute = buf[1];
-+ hour = buf[2];
-+ week = buf[3];
-+ day = buf[4];
-+ month = buf[5];
-+ year = buf[6];
-+
-+ /* Extract additional information for AM/PM */
-+ twelve_hr = hour & 0x40;
-+ am_pm = hour & 0x20;
-+
-+ /* Write to rtc_time structure */
-+ time->tm_sec = bcd2bin(second & 0x7f);
-+ time->tm_min = bcd2bin(minute & 0x7f);
-+ if (twelve_hr) {
-+ /* Convert to 24 hr */
-+ if (am_pm)
-+ time->tm_hour = bcd2bin(hour & 0x10) + 12;
-+ else
-+ time->tm_hour = bcd2bin(hour & 0xBF);
-+ } else {
-+ time->tm_hour = bcd2bin(hour);
-+ }
-+
-+ time->tm_wday = bcd2bin(week & 0x07) - 1;
-+ time->tm_mday = bcd2bin(day & 0x3f);
-+ time->tm_mon = bcd2bin(month & 0x1F) - 1;
-+ /* assume 20YY not 19YY */
-+ time->tm_year = bcd2bin(year) + 100;
-+
-+ return 0;
-+}
-+
-+static int pt7c4338_set_time(struct device *dev, struct rtc_time *time)
-+{
-+ struct i2c_client *client = to_i2c_client(dev);
-+ u8 buf[7];
-+
-+ /* Extract time from rtc_time and load into pt7c4338*/
-+ buf[0] = bin2bcd(time->tm_sec);
-+ buf[1] = bin2bcd(time->tm_min);
-+ buf[2] = bin2bcd(time->tm_hour);
-+ buf[3] = bin2bcd(time->tm_wday + 1); /* Day of the week */
-+ buf[4] = bin2bcd(time->tm_mday); /* Date */
-+ buf[5] = bin2bcd(time->tm_mon + 1);
-+
-+ /* assume 20YY not 19YY */
-+ if (time->tm_year >= 100)
-+ buf[6] = bin2bcd(time->tm_year - 100);
-+ else
-+ buf[6] = bin2bcd(time->tm_year);
-+
-+ return i2c_smbus_write_i2c_block_data(client,
-+ PT7C4338_REG_SECONDS, 7, buf);
-+}
-+
-+static const struct rtc_class_ops pt7c4338_rtc_ops = {
-+ .read_time = pt7c4338_read_time,
-+ .set_time = pt7c4338_set_time,
-+};
-+
-+static int pt7c4338_probe(struct i2c_client *client,
-+ const struct i2c_device_id *id)
-+{
-+ struct pt7c4338 *pt7c4338;
-+ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
-+ int ret;
-+
-+ pt7c4338 = kzalloc(sizeof(struct pt7c4338), GFP_KERNEL);
-+ if (!pt7c4338)
-+ return -ENOMEM;
-+
-+ pt7c4338->client = client;
-+ i2c_set_clientdata(client, pt7c4338);
-+ pt7c4338->rtc = rtc_device_register(client->name, &client->dev,
-+ &pt7c4338_rtc_ops, THIS_MODULE);
-+ if (IS_ERR(pt7c4338->rtc)) {
-+ ret = PTR_ERR(pt7c4338->rtc);
-+ dev_err(&client->dev, "unable to register the class device\n");
-+ goto out_free;
-+ }
-+
-+ return 0;
-+out_free:
-+ i2c_set_clientdata(client, NULL);
-+ kfree(pt7c4338);
-+ return ret;
-+}
-+
-+static int pt7c4338_remove(struct i2c_client *client)
-+{
-+ struct pt7c4338 *pt7c4338 = i2c_get_clientdata(client);
-+
-+ rtc_device_unregister(pt7c4338->rtc);
-+ i2c_set_clientdata(client, NULL);
-+ kfree(pt7c4338);
-+ return 0;
-+}
-+
-+static struct i2c_driver pt7c4338_driver = {
-+ .driver = {
-+ .name = "rtc-pt7c4338",
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = pt7c4338_probe,
-+ .remove = pt7c4338_remove,
-+ .id_table = pt7c4338_id,
-+};
-+
-+static int __init pt7c4338_init(void)
-+{
-+ return i2c_add_driver(&pt7c4338_driver);
-+}
-+
-+static void __exit pt7c4338_exit(void)
-+{
-+ i2c_del_driver(&pt7c4338_driver);
-+}
-+
-+module_init(pt7c4338_init);
-+module_exit(pt7c4338_exit);
-+
-+MODULE_AUTHOR("Priyanka Jain <Priyanka.Jain@freescale.com>");
-+MODULE_DESCRIPTION("pericom Technology Inc. PT7C4338 RTC Driver");
-+MODULE_LICENSE("GPL");
+++ /dev/null
-Implement the SPI-GPIO delay function for busses that need speed limitation.
-
---mb
-
-
-
---- a/drivers/spi/spi-gpio.c
-+++ b/drivers/spi/spi-gpio.c
-@@ -21,6 +21,7 @@
- #include <linux/module.h>
- #include <linux/platform_device.h>
- #include <linux/gpio.h>
-+#include <linux/delay.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
- #include <linux/of_gpio.h>
-@@ -73,6 +74,7 @@ struct spi_gpio {
- * #define SPI_MOSI_GPIO 120
- * #define SPI_SCK_GPIO 121
- * #define SPI_N_CHIPSEL 4
-+ * #undef NEED_SPIDELAY
- * #include "spi-gpio.c"
- */
-
-@@ -80,6 +82,7 @@ struct spi_gpio {
- #define DRIVER_NAME "spi_gpio"
-
- #define GENERIC_BITBANG /* vs tight inlines */
-+#define NEED_SPIDELAY 1
-
- /* all functions referencing these symbols must define pdata */
- #define SPI_MISO_GPIO ((pdata)->miso)
-@@ -130,12 +133,20 @@ static inline int getmiso(const struct s
- #undef pdata
-
- /*
-- * NOTE: this clocks "as fast as we can". It "should" be a function of the
-- * requested device clock. Software overhead means we usually have trouble
-- * reaching even one Mbit/sec (except when we can inline bitops), so for now
-- * we'll just assume we never need additional per-bit slowdowns.
-+ * NOTE: to clock "as fast as we can", set spi_device.max_speed_hz
-+ * and spi_transfer.speed_hz to 0.
-+ * Otherwise this is a function of the requested device clock.
-+ * Software overhead means we usually have trouble
-+ * reaching even one Mbit/sec (except when we can inline bitops). So on small
-+ * embedded devices with fast SPI slaves you usually don't need a delay.
- */
--#define spidelay(nsecs) do {} while (0)
-+static inline void spidelay(unsigned nsecs)
-+{
-+#ifdef NEED_SPIDELAY
-+ if (unlikely(nsecs))
-+ ndelay(nsecs);
-+#endif /* NEED_SPIDELAY */
-+}
-
- #include "spi-bitbang-txrx.h"
-
+++ /dev/null
-THIS CODE IS DEPRECATED.
-
-Please use the new mainline SPI-GPIO driver, as of 2.6.29.
-
---mb
-
-
-
----
- drivers/spi/Kconfig | 9 +
- drivers/spi/Makefile | 1
- drivers/spi/spi_gpio_old.c | 251 +++++++++++++++++++++++++++++++++++++++
- include/linux/spi/spi_gpio_old.h | 73 +++++++++++
- 4 files changed, 334 insertions(+)
-
---- /dev/null
-+++ b/include/linux/spi/spi_gpio_old.h
-@@ -0,0 +1,73 @@
-+/*
-+ * spi_gpio interface to platform code
-+ *
-+ * Copyright (c) 2008 Piotr Skamruk
-+ * Copyright (c) 2008 Michael Buesch
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef _LINUX_SPI_SPI_GPIO
-+#define _LINUX_SPI_SPI_GPIO
-+
-+#include <linux/types.h>
-+#include <linux/spi/spi.h>
-+
-+
-+/**
-+ * struct spi_gpio_platform_data - Data definitions for a SPI-GPIO device.
-+ *
-+ * This structure holds information about a GPIO-based SPI device.
-+ *
-+ * @pin_clk: The GPIO pin number of the CLOCK pin.
-+ *
-+ * @pin_miso: The GPIO pin number of the MISO pin.
-+ *
-+ * @pin_mosi: The GPIO pin number of the MOSI pin.
-+ *
-+ * @pin_cs: The GPIO pin number of the CHIPSELECT pin.
-+ *
-+ * @cs_activelow: If true, the chip is selected when the CS line is low.
-+ *
-+ * @no_spi_delay: If true, no delay is done in the lowlevel bitbanging.
-+ * Note that doing no delay is not standards compliant,
-+ * but it might be needed to speed up transfers on some
-+ * slow embedded machines.
-+ *
-+ * @boardinfo_setup: This callback is called after the
-+ * SPI master device was registered, but before the
-+ * device is registered.
-+ * @boardinfo_setup_data: Data argument passed to boardinfo_setup().
-+ */
-+struct spi_gpio_platform_data {
-+ unsigned int pin_clk;
-+ unsigned int pin_miso;
-+ unsigned int pin_mosi;
-+ unsigned int pin_cs;
-+ bool cs_activelow;
-+ bool no_spi_delay;
-+ int (*boardinfo_setup)(struct spi_board_info *bi,
-+ struct spi_master *master,
-+ void *data);
-+ void *boardinfo_setup_data;
-+};
-+
-+/**
-+ * SPI_GPIO_PLATDEV_NAME - The platform device name string.
-+ *
-+ * The name string that has to be used for platform_device_alloc
-+ * when allocating a spi-gpio device.
-+ */
-+#define SPI_GPIO_PLATDEV_NAME "spi-gpio"
-+
-+/**
-+ * spi_gpio_next_id - Get another platform device ID number.
-+ *
-+ * This returns the next platform device ID number that has to be used
-+ * for platform_device_alloc. The ID is opaque and should not be used for
-+ * anything else.
-+ */
-+int spi_gpio_next_id(void);
-+
-+#endif /* _LINUX_SPI_SPI_GPIO */
---- /dev/null
-+++ b/drivers/spi/spi_gpio_old.c
-@@ -0,0 +1,251 @@
-+/*
-+ * Bitbanging SPI bus driver using GPIO API
-+ *
-+ * Copyright (c) 2008 Piotr Skamruk
-+ * Copyright (c) 2008 Michael Buesch
-+ *
-+ * based on spi_s3c2410_gpio.c
-+ * Copyright (c) 2006 Ben Dooks
-+ * Copyright (c) 2006 Simtec Electronics
-+ * and on i2c-gpio.c
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/spinlock.h>
-+#include <linux/workqueue.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/spi_bitbang.h>
-+#include <linux/spi/spi_gpio_old.h>
-+#include <linux/gpio.h>
-+#include <asm/atomic.h>
-+
-+
-+struct spi_gpio {
-+ struct spi_bitbang bitbang;
-+ struct spi_gpio_platform_data *info;
-+ struct platform_device *pdev;
-+ struct spi_board_info bi;
-+};
-+
-+
-+static inline struct spi_gpio *spidev_to_sg(struct spi_device *dev)
-+{
-+ return dev->controller_data;
-+}
-+
-+static inline void setsck(struct spi_device *dev, int val)
-+{
-+ struct spi_gpio *sp = spidev_to_sg(dev);
-+ gpio_set_value(sp->info->pin_clk, val ? 1 : 0);
-+}
-+
-+static inline void setmosi(struct spi_device *dev, int val)
-+{
-+ struct spi_gpio *sp = spidev_to_sg(dev);
-+ gpio_set_value(sp->info->pin_mosi, val ? 1 : 0);
-+}
-+
-+static inline u32 getmiso(struct spi_device *dev)
-+{
-+ struct spi_gpio *sp = spidev_to_sg(dev);
-+ return gpio_get_value(sp->info->pin_miso) ? 1 : 0;
-+}
-+
-+static inline void do_spidelay(struct spi_device *dev, unsigned nsecs)
-+{
-+ struct spi_gpio *sp = spidev_to_sg(dev);
-+
-+ if (!sp->info->no_spi_delay)
-+ ndelay(nsecs);
-+}
-+
-+#define spidelay(nsecs) do { \
-+ /* Steal the spi_device pointer from our caller. \
-+ * The bitbang-API should probably get fixed here... */ \
-+ do_spidelay(spi, nsecs); \
-+ } while (0)
-+
-+#define EXPAND_BITBANG_TXRX
-+#include "spi-bitbang-txrx.h"
-+
-+static u32 spi_gpio_txrx_mode0(struct spi_device *spi,
-+ unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
-+}
-+
-+static u32 spi_gpio_txrx_mode1(struct spi_device *spi,
-+ unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits);
-+}
-+
-+static u32 spi_gpio_txrx_mode2(struct spi_device *spi,
-+ unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits);
-+}
-+
-+static u32 spi_gpio_txrx_mode3(struct spi_device *spi,
-+ unsigned nsecs, u32 word, u8 bits)
-+{
-+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits);
-+}
-+
-+static void spi_gpio_chipselect(struct spi_device *dev, int on)
-+{
-+ struct spi_gpio *sp = spidev_to_sg(dev);
-+
-+ if (sp->info->cs_activelow)
-+ on = !on;
-+ gpio_set_value(sp->info->pin_cs, on ? 1 : 0);
-+}
-+
-+static int spi_gpio_probe(struct platform_device *pdev)
-+{
-+ struct spi_master *master;
-+ struct spi_gpio_platform_data *pdata;
-+ struct spi_gpio *sp;
-+ struct spi_device *spidev;
-+ int err;
-+
-+ pdata = pdev->dev.platform_data;
-+ if (!pdata)
-+ return -ENXIO;
-+
-+ err = -ENOMEM;
-+ master = spi_alloc_master(&pdev->dev, sizeof(struct spi_gpio));
-+ if (!master)
-+ goto err_alloc_master;
-+
-+ sp = spi_master_get_devdata(master);
-+ platform_set_drvdata(pdev, sp);
-+ sp->info = pdata;
-+
-+ err = gpio_request(pdata->pin_clk, "spi_clock");
-+ if (err)
-+ goto err_request_clk;
-+ err = gpio_request(pdata->pin_mosi, "spi_mosi");
-+ if (err)
-+ goto err_request_mosi;
-+ err = gpio_request(pdata->pin_miso, "spi_miso");
-+ if (err)
-+ goto err_request_miso;
-+ err = gpio_request(pdata->pin_cs, "spi_cs");
-+ if (err)
-+ goto err_request_cs;
-+
-+ sp->bitbang.master = spi_master_get(master);
-+ sp->bitbang.master->bus_num = -1;
-+ sp->bitbang.master->num_chipselect = 1;
-+ sp->bitbang.chipselect = spi_gpio_chipselect;
-+ sp->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_mode0;
-+ sp->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_mode1;
-+ sp->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_mode2;
-+ sp->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_mode3;
-+
-+ gpio_direction_output(pdata->pin_clk, 0);
-+ gpio_direction_output(pdata->pin_mosi, 0);
-+ gpio_direction_output(pdata->pin_cs,
-+ pdata->cs_activelow ? 1 : 0);
-+ gpio_direction_input(pdata->pin_miso);
-+
-+ err = spi_bitbang_start(&sp->bitbang);
-+ if (err)
-+ goto err_no_bitbang;
-+ err = pdata->boardinfo_setup(&sp->bi, master,
-+ pdata->boardinfo_setup_data);
-+ if (err)
-+ goto err_bi_setup;
-+ sp->bi.controller_data = sp;
-+ spidev = spi_new_device(master, &sp->bi);
-+ if (!spidev)
-+ goto err_new_dev;
-+
-+ return 0;
-+
-+err_new_dev:
-+err_bi_setup:
-+ spi_bitbang_stop(&sp->bitbang);
-+err_no_bitbang:
-+ spi_master_put(sp->bitbang.master);
-+ gpio_free(pdata->pin_cs);
-+err_request_cs:
-+ gpio_free(pdata->pin_miso);
-+err_request_miso:
-+ gpio_free(pdata->pin_mosi);
-+err_request_mosi:
-+ gpio_free(pdata->pin_clk);
-+err_request_clk:
-+ kfree(master);
-+
-+err_alloc_master:
-+ return err;
-+}
-+
-+static int spi_gpio_remove(struct platform_device *pdev)
-+{
-+ struct spi_gpio *sp;
-+ struct spi_gpio_platform_data *pdata;
-+
-+ pdata = pdev->dev.platform_data;
-+ sp = platform_get_drvdata(pdev);
-+
-+ gpio_free(pdata->pin_clk);
-+ gpio_free(pdata->pin_mosi);
-+ gpio_free(pdata->pin_miso);
-+ gpio_free(pdata->pin_cs);
-+ spi_bitbang_stop(&sp->bitbang);
-+ spi_master_put(sp->bitbang.master);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver spi_gpio_driver = {
-+ .driver = {
-+ .name = SPI_GPIO_PLATDEV_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = spi_gpio_probe,
-+ .remove = spi_gpio_remove,
-+};
-+
-+int spi_gpio_next_id(void)
-+{
-+ static atomic_t counter = ATOMIC_INIT(-1);
-+
-+ return atomic_inc_return(&counter);
-+}
-+EXPORT_SYMBOL(spi_gpio_next_id);
-+
-+static int __init spi_gpio_init(void)
-+{
-+ int err;
-+
-+ err = platform_driver_register(&spi_gpio_driver);
-+ if (err)
-+ printk(KERN_ERR "spi-gpio: register failed: %d\n", err);
-+
-+ return err;
-+}
-+module_init(spi_gpio_init);
-+
-+static void __exit spi_gpio_exit(void)
-+{
-+ platform_driver_unregister(&spi_gpio_driver);
-+}
-+module_exit(spi_gpio_exit);
-+
-+MODULE_AUTHOR("Piot Skamruk <piotr.skamruk at gmail.com>");
-+MODULE_AUTHOR("Michael Buesch");
-+MODULE_DESCRIPTION("Platform independent GPIO bitbanging SPI driver");
-+MODULE_LICENSE("GPL v2");
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -225,6 +225,15 @@ config SPI_GPIO
- GPIO operations, you should be able to leverage that for better
- speed with a custom version of this driver; see the source code.
-
-+config SPI_GPIO_OLD
-+ tristate "Old GPIO API based bitbanging SPI controller (DEPRECATED)"
-+ depends on SPI_MASTER && GPIOLIB
-+ select SPI_BITBANG
-+ help
-+ This code is deprecated. Please use the new mainline SPI-GPIO driver.
-+
-+ If unsure, say N.
-+
- config SPI_IMX
- tristate "Freescale i.MX SPI controllers"
- depends on ARCH_MXC || COMPILE_TEST
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -40,6 +40,7 @@ obj-$(CONFIG_SPI_FSL_LIB) += spi-fsl-li
- obj-$(CONFIG_SPI_FSL_ESPI) += spi-fsl-espi.o
- obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-spi.o
- obj-$(CONFIG_SPI_GPIO) += spi-gpio.o
-+obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o
- obj-$(CONFIG_SPI_IMX) += spi-imx.o
- obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o
- obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o
+++ /dev/null
---- a/drivers/crypto/hifn_795x.c
-+++ b/drivers/crypto/hifn_795x.c
-@@ -682,12 +682,12 @@ static inline u32 hifn_read_1(struct hif
-
- static inline void hifn_write_0(struct hifn_device *dev, u32 reg, u32 val)
- {
-- writel((__force u32)cpu_to_le32(val), dev->bar[0] + reg);
-+ writel(val, dev->bar[0] + reg);
- }
-
- static inline void hifn_write_1(struct hifn_device *dev, u32 reg, u32 val)
- {
-- writel((__force u32)cpu_to_le32(val), dev->bar[1] + reg);
-+ writel(val, dev->bar[1] + reg);
- }
-
- static void hifn_wait_puc(struct hifn_device *dev)
+++ /dev/null
---- a/drivers/tty/serial/8250/8250_core.c
-+++ b/drivers/tty/serial/8250/8250_core.c
-@@ -16,7 +16,7 @@
- * membase is an 'ioremapped' cookie.
- */
-
--#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-+#if defined(CONFIG_SERIAL_8250_SYSRQ) && defined(CONFIG_MAGIC_SYSRQ)
- #define SUPPORT_SYSRQ
- #endif
-
---- a/drivers/tty/serial/8250/Kconfig
-+++ b/drivers/tty/serial/8250/Kconfig
-@@ -91,6 +91,10 @@ config SERIAL_8250_CONSOLE
-
- If unsure, say N.
-
-+config SERIAL_8250_SYSRQ
-+ bool "Magic sysrq support on 8250/16550 devices"
-+ depends on SERIAL_8250_CONSOLE
-+
- config SERIAL_8250_GSC
- tristate
- depends on SERIAL_8250 && GSC
+++ /dev/null
---- a/net/Kconfig
-+++ b/net/Kconfig
-@@ -89,6 +89,9 @@ source "net/netlabel/Kconfig"
-
- endif # if INET
-
-+config SOCK_DIAG
-+ bool
-+
- config NETWORK_SECMARK
- bool "Security Marking"
- help
---- a/net/core/Makefile
-+++ b/net/core/Makefile
-@@ -9,8 +9,9 @@ obj-$(CONFIG_SYSCTL) += sysctl_net_core.
-
- obj-y += dev.o ethtool.o dev_addr_lists.o dst.o netevent.o \
- neighbour.o rtnetlink.o utils.o link_watch.o filter.o \
-- sock_diag.o dev_ioctl.o tso.o
-+ dev_ioctl.o tso.o
-
-+obj-$(CONFIG_SOCK_DIAG) += sock_diag.o
- obj-$(CONFIG_XFRM) += flow.o
- obj-y += net-sysfs.o
- obj-$(CONFIG_PROC_FS) += net-procfs.o
---- a/net/ipv4/Kconfig
-+++ b/net/ipv4/Kconfig
-@@ -419,6 +419,7 @@ config INET_LRO
-
- config INET_DIAG
- tristate "INET: socket monitoring interface"
-+ select SOCK_DIAG
- default y
- ---help---
- Support for INET (TCP, DCCP, etc) socket monitoring interface used by
---- a/net/unix/Kconfig
-+++ b/net/unix/Kconfig
-@@ -22,6 +22,7 @@ config UNIX
- config UNIX_DIAG
- tristate "UNIX: socket monitoring interface"
- depends on UNIX
-+ select SOCK_DIAG
- default n
- ---help---
- Support for UNIX socket monitoring interface used by the ss tool.
---- a/net/netlink/Kconfig
-+++ b/net/netlink/Kconfig
-@@ -4,6 +4,7 @@
-
- config NETLINK_DIAG
- tristate "NETLINK: socket monitoring interface"
-+ select SOCK_DIAG
- default n
- ---help---
- Support for NETLINK socket monitoring interface used by the ss tool.
---- a/net/packet/Kconfig
-+++ b/net/packet/Kconfig
-@@ -18,6 +18,7 @@ config PACKET
- config PACKET_DIAG
- tristate "Packet: sockets monitoring interface"
- depends on PACKET
-+ select SOCK_DIAG
- default n
- ---help---
- Support for PF_PACKET sockets monitoring interface used by the ss tool.
+++ /dev/null
---- a/fs/locks.c
-+++ b/fs/locks.c
-@@ -2620,6 +2620,8 @@ static const struct file_operations proc
-
- static int __init proc_locks_init(void)
- {
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return 0;
- proc_create("locks", 0, NULL, &proc_locks_operations);
- return 0;
- }
---- a/fs/proc/Kconfig
-+++ b/fs/proc/Kconfig
-@@ -71,3 +71,8 @@ config PROC_PAGE_MONITOR
- /proc/pid/smaps, /proc/pid/clear_refs, /proc/pid/pagemap,
- /proc/kpagecount, and /proc/kpageflags. Disabling these
- interfaces will reduce the size of the kernel by approximately 4kb.
-+
-+config PROC_STRIPPED
-+ default n
-+ depends on EXPERT
-+ bool "Strip non-essential /proc functionality to reduce code size"
---- a/fs/proc/consoles.c
-+++ b/fs/proc/consoles.c
-@@ -106,6 +106,9 @@ static const struct file_operations proc
-
- static int __init proc_consoles_init(void)
- {
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return 0;
-+
- proc_create("consoles", 0, NULL, &proc_consoles_operations);
- return 0;
- }
---- a/fs/proc/proc_tty.c
-+++ b/fs/proc/proc_tty.c
-@@ -143,7 +143,10 @@ static const struct file_operations proc
- void proc_tty_register_driver(struct tty_driver *driver)
- {
- struct proc_dir_entry *ent;
--
-+
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return;
-+
- if (!driver->driver_name || driver->proc_entry ||
- !driver->ops->proc_fops)
- return;
-@@ -160,6 +163,9 @@ void proc_tty_unregister_driver(struct t
- {
- struct proc_dir_entry *ent;
-
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return;
-+
- ent = driver->proc_entry;
- if (!ent)
- return;
-@@ -174,6 +180,9 @@ void proc_tty_unregister_driver(struct t
- */
- void __init proc_tty_init(void)
- {
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return;
-+
- if (!proc_mkdir("tty", NULL))
- return;
- proc_mkdir("tty/ldisc", NULL); /* Preserved: it's userspace visible */
---- a/kernel/exec_domain.c
-+++ b/kernel/exec_domain.c
-@@ -176,6 +176,8 @@ static const struct file_operations exec
-
- static int __init proc_execdomains_init(void)
- {
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return 0;
- proc_create("execdomains", 0, NULL, &execdomains_proc_fops);
- return 0;
- }
---- a/kernel/irq/proc.c
-+++ b/kernel/irq/proc.c
-@@ -330,6 +330,9 @@ void register_irq_proc(unsigned int irq,
- static DEFINE_MUTEX(register_lock);
- char name [MAX_NAMELEN];
-
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
-+ return;
-+
- if (!root_irq_dir || (desc->irq_data.chip == &no_irq_chip))
- return;
-
-@@ -379,6 +382,9 @@ void unregister_irq_proc(unsigned int ir
- {
- char name [MAX_NAMELEN];
-
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
-+ return;
-+
- if (!root_irq_dir || !desc->dir)
- return;
- #ifdef CONFIG_SMP
-@@ -414,6 +420,9 @@ void init_irq_proc(void)
- unsigned int irq;
- struct irq_desc *desc;
-
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
-+ return;
-+
- /* create /proc/irq */
- root_irq_dir = proc_mkdir("irq", NULL);
- if (!root_irq_dir)
---- a/kernel/time/timer_list.c
-+++ b/kernel/time/timer_list.c
-@@ -362,6 +362,8 @@ static int __init init_timer_list_procfs
- {
- struct proc_dir_entry *pe;
-
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return 0;
- pe = proc_create("timer_list", 0444, NULL, &timer_list_fops);
- if (!pe)
- return -ENOMEM;
---- a/mm/vmalloc.c
-+++ b/mm/vmalloc.c
-@@ -2662,6 +2662,8 @@ static const struct file_operations proc
-
- static int __init proc_vmalloc_init(void)
- {
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return 0;
- proc_create("vmallocinfo", S_IRUSR, NULL, &proc_vmalloc_operations);
- return 0;
- }
---- a/mm/vmstat.c
-+++ b/mm/vmstat.c
-@@ -1424,10 +1424,12 @@ static int __init setup_vmstat(void)
- cpu_notifier_register_done();
- #endif
- #ifdef CONFIG_PROC_FS
-- proc_create("buddyinfo", S_IRUGO, NULL, &fragmentation_file_operations);
-- proc_create("pagetypeinfo", S_IRUGO, NULL, &pagetypeinfo_file_ops);
-+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) {
-+ proc_create("buddyinfo", S_IRUGO, NULL, &fragmentation_file_operations);
-+ proc_create("pagetypeinfo", S_IRUGO, NULL, &pagetypeinfo_file_ops);
-+ proc_create("zoneinfo", S_IRUGO, NULL, &proc_zoneinfo_file_operations);
-+ }
- proc_create("vmstat", S_IRUGO, NULL, &proc_vmstat_file_operations);
-- proc_create("zoneinfo", S_IRUGO, NULL, &proc_zoneinfo_file_operations);
- #endif
- return 0;
- }
---- a/net/8021q/vlanproc.c
-+++ b/net/8021q/vlanproc.c
-@@ -127,6 +127,9 @@ void vlan_proc_cleanup(struct net *net)
- {
- struct vlan_net *vn = net_generic(net, vlan_net_id);
-
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return;
-+
- if (vn->proc_vlan_conf)
- remove_proc_entry(name_conf, vn->proc_vlan_dir);
-
-@@ -146,6 +149,9 @@ int __net_init vlan_proc_init(struct net
- {
- struct vlan_net *vn = net_generic(net, vlan_net_id);
-
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return 0;
-+
- vn->proc_vlan_dir = proc_net_mkdir(net, name_root, net->proc_net);
- if (!vn->proc_vlan_dir)
- goto err;
---- a/net/core/sock.c
-+++ b/net/core/sock.c
-@@ -2939,6 +2939,8 @@ static __net_initdata struct pernet_oper
-
- static int __init proto_init(void)
- {
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return 0;
- return register_pernet_subsys(&proto_net_ops);
- }
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -2490,10 +2490,12 @@ static const struct file_operations fib_
-
- int __net_init fib_proc_init(struct net *net)
- {
-- if (!proc_create("fib_trie", S_IRUGO, net->proc_net, &fib_trie_fops))
-+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+ !proc_create("fib_trie", S_IRUGO, net->proc_net, &fib_trie_fops))
- goto out1;
-
-- if (!proc_create("fib_triestat", S_IRUGO, net->proc_net,
-+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+ !proc_create("fib_triestat", S_IRUGO, net->proc_net,
- &fib_triestat_fops))
- goto out2;
-
-@@ -2503,17 +2505,21 @@ int __net_init fib_proc_init(struct net
- return 0;
-
- out3:
-- remove_proc_entry("fib_triestat", net->proc_net);
-+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ remove_proc_entry("fib_triestat", net->proc_net);
- out2:
-- remove_proc_entry("fib_trie", net->proc_net);
-+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ remove_proc_entry("fib_trie", net->proc_net);
- out1:
- return -ENOMEM;
- }
-
- void __net_exit fib_proc_exit(struct net *net)
- {
-- remove_proc_entry("fib_trie", net->proc_net);
-- remove_proc_entry("fib_triestat", net->proc_net);
-+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) {
-+ remove_proc_entry("fib_trie", net->proc_net);
-+ remove_proc_entry("fib_triestat", net->proc_net);
-+ }
- remove_proc_entry("route", net->proc_net);
- }
-
---- a/net/ipv4/proc.c
-+++ b/net/ipv4/proc.c
-@@ -524,6 +524,9 @@ static __net_initdata struct pernet_oper
-
- int __init ip_misc_proc_init(void)
- {
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return 0;
-+
- return register_pernet_subsys(&ip_proc_ops);
- }
-
---- a/net/ipv4/route.c
-+++ b/net/ipv4/route.c
-@@ -416,6 +416,9 @@ static struct pernet_operations ip_rt_pr
-
- static int __init ip_rt_proc_init(void)
- {
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return 0;
-+
- return register_pernet_subsys(&ip_rt_proc_ops);
- }
-
---- a/ipc/msg.c
-+++ b/ipc/msg.c
-@@ -1072,6 +1072,9 @@ void __init msg_init(void)
- printk(KERN_INFO "msgmni has been set to %d\n",
- init_ipc_ns.msg_ctlmni);
-
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return;
-+
- ipc_init_proc_interface("sysvipc/msg",
- " key msqid perms cbytes qnum lspid lrpid uid gid cuid cgid stime rtime ctime\n",
- IPC_MSG_IDS, sysvipc_msg_proc_show);
---- a/ipc/sem.c
-+++ b/ipc/sem.c
-@@ -191,6 +191,8 @@ void sem_exit_ns(struct ipc_namespace *n
- void __init sem_init(void)
- {
- sem_init_ns(&init_ipc_ns);
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return;
- ipc_init_proc_interface("sysvipc/sem",
- " key semid perms nsems uid gid cuid cgid otime ctime\n",
- IPC_SEM_IDS, sysvipc_sem_proc_show);
---- a/ipc/shm.c
-+++ b/ipc/shm.c
-@@ -118,6 +118,8 @@ pure_initcall(ipc_ns_init);
-
- void __init shm_init(void)
- {
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return;
- ipc_init_proc_interface("sysvipc/shm",
- #if BITS_PER_LONG <= 32
- " key shmid perms size cpid lpid nattch uid gid cuid cgid atime dtime ctime rss swap\n",
---- a/ipc/util.c
-+++ b/ipc/util.c
-@@ -161,6 +161,9 @@ void __init ipc_init_proc_interface(cons
- struct proc_dir_entry *pde;
- struct ipc_proc_iface *iface;
-
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return;
-+
- iface = kmalloc(sizeof(*iface), GFP_KERNEL);
- if (!iface)
- return;
---- a/net/core/net-procfs.c
-+++ b/net/core/net-procfs.c
-@@ -318,10 +318,12 @@ static int __net_init dev_proc_net_init(
-
- if (!proc_create("dev", S_IRUGO, net->proc_net, &dev_seq_fops))
- goto out;
-- if (!proc_create("softnet_stat", S_IRUGO, net->proc_net,
-+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+ !proc_create("softnet_stat", S_IRUGO, net->proc_net,
- &softnet_seq_fops))
- goto out_dev;
-- if (!proc_create("ptype", S_IRUGO, net->proc_net, &ptype_seq_fops))
-+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+ !proc_create("ptype", S_IRUGO, net->proc_net, &ptype_seq_fops))
- goto out_softnet;
-
- if (wext_proc_init(net))
-@@ -330,9 +332,11 @@ static int __net_init dev_proc_net_init(
- out:
- return rc;
- out_ptype:
-- remove_proc_entry("ptype", net->proc_net);
-+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ remove_proc_entry("ptype", net->proc_net);
- out_softnet:
-- remove_proc_entry("softnet_stat", net->proc_net);
-+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ remove_proc_entry("softnet_stat", net->proc_net);
- out_dev:
- remove_proc_entry("dev", net->proc_net);
- goto out;
-@@ -342,8 +346,10 @@ static void __net_exit dev_proc_net_exit
- {
- wext_proc_exit(net);
-
-- remove_proc_entry("ptype", net->proc_net);
-- remove_proc_entry("softnet_stat", net->proc_net);
-+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) {
-+ remove_proc_entry("ptype", net->proc_net);
-+ remove_proc_entry("softnet_stat", net->proc_net);
-+ }
- remove_proc_entry("dev", net->proc_net);
- }
-
+++ /dev/null
---- a/drivers/base/Kconfig
-+++ b/drivers/base/Kconfig
-@@ -229,7 +229,7 @@ config SOC_BUS
- source "drivers/base/regmap/Kconfig"
-
- config DMA_SHARED_BUFFER
-- bool
-+ tristate
- default n
- select ANON_INODES
- help
---- a/drivers/dma-buf/Makefile
-+++ b/drivers/dma-buf/Makefile
-@@ -1 +1,2 @@
--obj-y := dma-buf.o fence.o reservation.o seqno-fence.o
-+obj-$(CONFIG_DMA_SHARED_BUFFER) := dma-shared-buffer.o
-+dma-shared-buffer-objs := dma-buf.o fence.o reservation.o seqno-fence.o
---- a/drivers/dma-buf/dma-buf.c
-+++ b/drivers/dma-buf/dma-buf.c
-@@ -32,6 +32,7 @@
- #include <linux/seq_file.h>
- #include <linux/poll.h>
- #include <linux/reservation.h>
-+#include <linux/module.h>
-
- static inline int is_dma_buf_file(struct file *);
-
-@@ -904,4 +905,5 @@ static void __exit dma_buf_deinit(void)
- {
- dma_buf_uninit_debugfs();
- }
--__exitcall(dma_buf_deinit);
-+module_exit(dma_buf_deinit);
-+MODULE_LICENSE("GPL");
---- a/kernel/sched/core.c
-+++ b/kernel/sched/core.c
-@@ -1823,6 +1823,7 @@ int wake_up_state(struct task_struct *p,
- {
- return try_to_wake_up(p, state, 0);
- }
-+EXPORT_SYMBOL_GPL(wake_up_state);
-
- /*
- * This function clears the sched_dl_entity static params.
+++ /dev/null
---- a/lib/kobject_uevent.c
-+++ b/lib/kobject_uevent.c
-@@ -53,6 +53,18 @@ static const char *kobject_actions[] = {
- [KOBJ_OFFLINE] = "offline",
- };
-
-+u64 uevent_next_seqnum(void)
-+{
-+ u64 seq;
-+
-+ mutex_lock(&uevent_sock_mutex);
-+ seq = ++uevent_seqnum;
-+ mutex_unlock(&uevent_sock_mutex);
-+
-+ return seq;
-+}
-+EXPORT_SYMBOL_GPL(uevent_next_seqnum);
-+
- /**
- * kobject_action_type - translate action string to numeric type
- *
+++ /dev/null
---- a/include/linux/kobject.h
-+++ b/include/linux/kobject.h
-@@ -32,6 +32,8 @@
- #define UEVENT_NUM_ENVP 32 /* number of env pointers */
- #define UEVENT_BUFFER_SIZE 2048 /* buffer for the variables */
-
-+struct sk_buff;
-+
- #ifdef CONFIG_UEVENT_HELPER
- /* path to the userspace helper executed on an event */
- extern char uevent_helper[];
-@@ -221,4 +223,7 @@ int add_uevent_var(struct kobj_uevent_en
- int kobject_action_type(const char *buf, size_t count,
- enum kobject_action *type);
-
-+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
-+ gfp_t allocation);
-+
- #endif /* _KOBJECT_H_ */
---- a/lib/kobject_uevent.c
-+++ b/lib/kobject_uevent.c
-@@ -424,6 +424,43 @@ int add_uevent_var(struct kobj_uevent_en
- EXPORT_SYMBOL_GPL(add_uevent_var);
-
- #if defined(CONFIG_NET)
-+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
-+ gfp_t allocation)
-+{
-+ struct uevent_sock *ue_sk;
-+ int err = 0;
-+
-+ /* send netlink message */
-+ mutex_lock(&uevent_sock_mutex);
-+ list_for_each_entry(ue_sk, &uevent_sock_list, list) {
-+ struct sock *uevent_sock = ue_sk->sk;
-+ struct sk_buff *skb2;
-+
-+ skb2 = skb_clone(skb, allocation);
-+ if (!skb2)
-+ break;
-+
-+ err = netlink_broadcast(uevent_sock, skb2, pid, group,
-+ allocation);
-+ if (err)
-+ break;
-+ }
-+ mutex_unlock(&uevent_sock_mutex);
-+
-+ kfree_skb(skb);
-+ return err;
-+}
-+#else
-+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
-+ gfp_t allocation)
-+{
-+ kfree_skb(skb);
-+ return 0;
-+}
-+#endif
-+EXPORT_SYMBOL_GPL(broadcast_uevent);
-+
-+#if defined(CONFIG_NET)
- static int uevent_net_init(struct net *net)
- {
- struct uevent_sock *ue_sk;
+++ /dev/null
---- a/init/main.c
-+++ b/init/main.c
-@@ -963,7 +963,8 @@ static int __ref kernel_init(void *unuse
- pr_err("Failed to execute %s (error %d). Attempting defaults...\n",
- execute_command, ret);
- }
-- if (!try_to_run_init_process("/sbin/init") ||
-+ if (!try_to_run_init_process("/etc/preinit") ||
-+ !try_to_run_init_process("/sbin/init") ||
- !try_to_run_init_process("/etc/init") ||
- !try_to_run_init_process("/bin/init") ||
- !try_to_run_init_process("/bin/sh"))
+++ /dev/null
---- a/scripts/gen_initramfs_list.sh
-+++ b/scripts/gen_initramfs_list.sh
-@@ -59,6 +59,18 @@ default_initramfs() {
- EOF
- }
-
-+list_openwrt_initramfs() {
-+ :
-+}
-+
-+openwrt_initramfs() {
-+ # make sure that /dev/console exists
-+ cat <<-EOF >> ${output}
-+ dir /dev 0755 0 0
-+ nod /dev/console 0600 0 0 c 5 1
-+ EOF
-+}
-+
- filetype() {
- local argv1="$1"
-
-@@ -177,6 +189,8 @@ dir_filelist() {
- if [ "$(echo "${dirlist}" | wc -l)" -gt 1 ]; then
- ${dep_list}print_mtime "$1"
-
-+ ${dep_list}openwrt_initramfs
-+
- echo "${dirlist}" | \
- while read x; do
- ${dep_list}parse ${x}
+++ /dev/null
---- /dev/null
-+++ b/include/linux/crashlog.h
-@@ -0,0 +1,17 @@
-+#ifndef __CRASHLOG_H
-+#define __CRASHLOG_H
-+
-+#ifdef CONFIG_CRASHLOG
-+void crashlog_init_bootmem(struct bootmem_data *bdata);
-+void crashlog_init_memblock(phys_addr_t addr, phys_addr_t size);
-+#else
-+static inline void crashlog_init_bootmem(struct bootmem_data *bdata)
-+{
-+}
-+
-+static inline void crashlog_init_memblock(phys_addr_t addr, phys_addr_t size)
-+{
-+}
-+#endif
-+
-+#endif
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -1279,6 +1279,10 @@ config RELAY
-
- If unsure, say N.
-
-+config CRASHLOG
-+ bool "Crash logging"
-+ depends on (!NO_BOOTMEM || HAVE_MEMBLOCK) && !(ARM || SPARC || PPC)
-+
- config BLK_DEV_INITRD
- bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
- depends on BROKEN || !FRV
---- a/kernel/Makefile
-+++ b/kernel/Makefile
-@@ -96,6 +96,7 @@ obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
- obj-$(CONFIG_JUMP_LABEL) += jump_label.o
- obj-$(CONFIG_CONTEXT_TRACKING) += context_tracking.o
- obj-$(CONFIG_TORTURE_TEST) += torture.o
-+obj-$(CONFIG_CRASHLOG) += crashlog.o
-
- $(obj)/configs.o: $(obj)/config_data.h
-
---- /dev/null
-+++ b/kernel/crashlog.c
-@@ -0,0 +1,181 @@
-+/*
-+ * Crash information logger
-+ * Copyright (C) 2010 Felix Fietkau <nbd@nbd.name>
-+ *
-+ * Based on ramoops.c
-+ * Copyright (C) 2010 Marco Stornelli <marco.stornelli@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-+ * 02110-1301 USA
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/bootmem.h>
-+#include <linux/memblock.h>
-+#include <linux/debugfs.h>
-+#include <linux/crashlog.h>
-+#include <linux/kmsg_dump.h>
-+#include <linux/module.h>
-+#include <linux/pfn.h>
-+#include <asm/io.h>
-+
-+#define CRASHLOG_PAGES 4
-+#define CRASHLOG_SIZE (CRASHLOG_PAGES * PAGE_SIZE)
-+#define CRASHLOG_MAGIC 0xa1eedead
-+
-+/*
-+ * Start the log at 1M before the end of RAM, as some boot loaders like
-+ * to use the end of the RAM for stack usage and other things
-+ * If this fails, fall back to using the last part.
-+ */
-+#define CRASHLOG_OFFSET (1024 * 1024)
-+
-+struct crashlog_data {
-+ u32 magic;
-+ u32 len;
-+ u8 data[];
-+};
-+
-+static struct debugfs_blob_wrapper crashlog_blob;
-+static unsigned long crashlog_addr = 0;
-+static struct crashlog_data *crashlog_buf;
-+static struct kmsg_dumper dump;
-+static bool first = true;
-+
-+extern struct list_head *crashlog_modules;
-+
-+#ifndef CONFIG_NO_BOOTMEM
-+void __init crashlog_init_bootmem(bootmem_data_t *bdata)
-+{
-+ unsigned long addr;
-+
-+ if (crashlog_addr)
-+ return;
-+
-+ addr = PFN_PHYS(bdata->node_low_pfn) - CRASHLOG_OFFSET;
-+ if (reserve_bootmem(addr, CRASHLOG_SIZE, BOOTMEM_EXCLUSIVE) < 0) {
-+ printk("Crashlog failed to allocate RAM at address 0x%lx\n", addr);
-+ bdata->node_low_pfn -= CRASHLOG_PAGES;
-+ addr = PFN_PHYS(bdata->node_low_pfn);
-+ }
-+ crashlog_addr = addr;
-+}
-+#endif
-+
-+#ifdef CONFIG_HAVE_MEMBLOCK
-+void __init_memblock crashlog_init_memblock(phys_addr_t addr, phys_addr_t size)
-+{
-+ if (crashlog_addr)
-+ return;
-+
-+ addr += size - CRASHLOG_OFFSET;
-+ if (memblock_reserve(addr, CRASHLOG_SIZE)) {
-+ printk("Crashlog failed to allocate RAM at address 0x%lx\n", (unsigned long) addr);
-+ return;
-+ }
-+
-+ crashlog_addr = addr;
-+}
-+#endif
-+
-+static void __init crashlog_copy(void)
-+{
-+ if (crashlog_buf->magic != CRASHLOG_MAGIC)
-+ return;
-+
-+ if (!crashlog_buf->len || crashlog_buf->len >
-+ CRASHLOG_SIZE - sizeof(*crashlog_buf))
-+ return;
-+
-+ crashlog_blob.size = crashlog_buf->len;
-+ crashlog_blob.data = kmemdup(crashlog_buf->data,
-+ crashlog_buf->len, GFP_KERNEL);
-+
-+ debugfs_create_blob("crashlog", 0700, NULL, &crashlog_blob);
-+}
-+
-+static int get_maxlen(void)
-+{
-+ return CRASHLOG_SIZE - sizeof(*crashlog_buf) - crashlog_buf->len;
-+}
-+
-+static void crashlog_printf(const char *fmt, ...)
-+{
-+ va_list args;
-+ int len = get_maxlen();
-+
-+ if (!len)
-+ return;
-+
-+ va_start(args, fmt);
-+ crashlog_buf->len += vscnprintf(
-+ &crashlog_buf->data[crashlog_buf->len],
-+ len, fmt, args);
-+ va_end(args);
-+}
-+
-+static void crashlog_do_dump(struct kmsg_dumper *dumper,
-+ enum kmsg_dump_reason reason)
-+{
-+ struct timeval tv;
-+ struct module *m;
-+ char *buf;
-+ size_t len;
-+
-+ if (!first)
-+ crashlog_printf("\n===================================\n");
-+
-+ do_gettimeofday(&tv);
-+ crashlog_printf("Time: %lu.%lu\n",
-+ (long)tv.tv_sec, (long)tv.tv_usec);
-+
-+ if (first) {
-+ crashlog_printf("Modules:");
-+ list_for_each_entry(m, crashlog_modules, list) {
-+ crashlog_printf("\t%s@%p+%x", m->name,
-+ m->module_core, m->core_size,
-+ m->module_init, m->init_size);
-+ }
-+ crashlog_printf("\n");
-+ first = false;
-+ }
-+
-+ buf = (char *)&crashlog_buf->data[crashlog_buf->len];
-+
-+ kmsg_dump_get_buffer(dumper, true, buf, get_maxlen(), &len);
-+
-+ crashlog_buf->len += len;
-+}
-+
-+
-+int __init crashlog_init_fs(void)
-+{
-+ if (!crashlog_addr)
-+ return -ENOMEM;
-+
-+ crashlog_buf = ioremap(crashlog_addr, CRASHLOG_SIZE);
-+
-+ crashlog_copy();
-+
-+ crashlog_buf->magic = CRASHLOG_MAGIC;
-+ crashlog_buf->len = 0;
-+
-+ dump.max_reason = KMSG_DUMP_OOPS;
-+ dump.dump = crashlog_do_dump;
-+ kmsg_dump_register(&dump);
-+
-+ return 0;
-+}
-+module_init(crashlog_init_fs);
---- a/mm/bootmem.c
-+++ b/mm/bootmem.c
-@@ -15,6 +15,7 @@
- #include <linux/export.h>
- #include <linux/kmemleak.h>
- #include <linux/range.h>
-+#include <linux/crashlog.h>
- #include <linux/memblock.h>
- #include <linux/bug.h>
- #include <linux/io.h>
-@@ -177,6 +178,7 @@ static unsigned long __init free_all_boo
- if (!bdata->node_bootmem_map)
- return 0;
-
-+ crashlog_init_bootmem(bdata);
- map = bdata->node_bootmem_map;
- start = bdata->node_min_pfn;
- end = bdata->node_low_pfn;
---- a/kernel/module.c
-+++ b/kernel/module.c
-@@ -105,6 +105,9 @@ static LIST_HEAD(modules);
- #ifdef CONFIG_KGDB_KDB
- struct list_head *kdb_modules = &modules; /* kdb needs the list of modules */
- #endif /* CONFIG_KGDB_KDB */
-+#ifdef CONFIG_CRASHLOG
-+struct list_head *crashlog_modules = &modules;
-+#endif
-
- #ifdef CONFIG_MODULE_SIG
- #ifdef CONFIG_MODULE_SIG_FORCE
---- a/mm/memblock.c
-+++ b/mm/memblock.c
-@@ -19,6 +19,7 @@
- #include <linux/debugfs.h>
- #include <linux/seq_file.h>
- #include <linux/memblock.h>
-+#include <linux/crashlog.h>
-
- #include <asm-generic/sections.h>
- #include <linux/io.h>
-@@ -477,6 +478,8 @@ static void __init_memblock memblock_ins
- memblock_set_region_node(rgn, nid);
- type->cnt++;
- type->total_size += size;
-+ if (type == &memblock.memory && idx == 0)
-+ crashlog_init_memblock(base, size);
- }
-
- /**
+++ /dev/null
---- a/usr/Makefile
-+++ b/usr/Makefile
-@@ -53,6 +53,8 @@ ifneq ($(wildcard $(obj)/.initramfs_data
- include $(obj)/.initramfs_data.cpio.d
- endif
-
-+deps_initramfs_sane := $(foreach v,$(deps_initramfs),$(if $(findstring :,$(v)),,$(v)))
-+
- quiet_cmd_initfs = GEN $@
- cmd_initfs = $(initramfs) -o $@ $(ramfs-args) $(ramfs-input)
-
-@@ -61,14 +63,14 @@ targets := initramfs_data.cpio.gz initra
- initramfs_data.cpio.lzo initramfs_data.cpio.lz4 \
- initramfs_data.cpio
- # do not try to update files included in initramfs
--$(deps_initramfs): ;
-+$(deps_initramfs_sane): ;
-
--$(deps_initramfs): klibcdirs
-+$(deps_initramfs_sane): klibcdirs
- # We rebuild initramfs_data.cpio if:
- # 1) Any included file is newer then initramfs_data.cpio
- # 2) There are changes in which files are included (added or deleted)
- # 3) If gen_init_cpio are newer than initramfs_data.cpio
- # 4) arguments to gen_initramfs.sh changes
--$(obj)/initramfs_data.cpio$(suffix_y): $(obj)/gen_init_cpio $(deps_initramfs) klibcdirs
-+$(obj)/initramfs_data.cpio$(suffix_y): $(obj)/gen_init_cpio $(deps_initramfs_sane) klibcdirs
- $(Q)$(initramfs) -l $(ramfs-input) > $(obj)/.initramfs_data.cpio.d
- $(call if_changed,initfs)
+++ /dev/null
---- a/arch/arm/tools/mach-types
-+++ b/arch/arm/tools/mach-types
-@@ -1007,3 +1007,29 @@ eco5_bx2 MACH_ECO5_BX2 ECO5_BX2 4572
- eukrea_cpuimx28sd MACH_EUKREA_CPUIMX28SD EUKREA_CPUIMX28SD 4573
- domotab MACH_DOMOTAB DOMOTAB 4574
- pfla03 MACH_PFLA03 PFLA03 4575
-+#
-+# Additional mach-types supported by OpenWrt
-+#
-+wg302v1 MACH_WG302V1 WG302V1 889
-+pronghorn MACH_PRONGHORN PRONGHORN 928
-+pronghorn_metro MACH_PRONGHORNMETRO PRONGHORNMETRO 1040
-+sidewinder MACH_SIDEWINDER SIDEWINDER 1041
-+wrt300nv2 MACH_WRT300NV2 WRT300NV2 1077
-+compex42x MACH_COMPEXWP18 COMPEXWP18 1273
-+goldfish MACH_GOLDFISH GOLDFISH 1441
-+cambria MACH_CAMBRIA CAMBRIA 1468
-+dt2 MACH_DT2 DT2 1514
-+ap1000 MACH_AP1000 AP1000 1543
-+tw2662 MACH_TW2662 TW2662 1658
-+tw5334 MACH_TW5334 TW5334 1664
-+usr8200 MACH_USR8200 USR8200 1762
-+mi424wr MACH_MI424WR MI424WR 1778
-+gw2388 MACH_GW2388 GW2388 2635
-+iconnect MACH_ICONNECT ICONNECT 2870
-+nsb3ast MACH_NSB3AST NSB3AST 2917
-+goflexnet MACH_GOFLEXNET GOFLEXNET 3089
-+nas6210 MACH_NAS6210 NAS6210 3104
-+ns_k330 MACH_NS_K330 NS_K330 3108
-+bcm2708 MACH_BCM2708 BCM2708 3138
-+wn802t MACH_WN802T WN802T 3306
-+nsa310 MACH_NSA310 NSA310 4022
+++ /dev/null
-This generic GPIO watchdog is used on Huawei E970 (brcm47xx)
-
-Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
-
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -1139,6 +1139,15 @@ config WDT_MTX1
- Hardware driver for the MTX-1 boards. This is a watchdog timer that
- will reboot the machine after a 100 seconds timer expired.
-
-+config GPIO_WDT
-+ tristate "GPIO Hardware Watchdog"
-+ help
-+ Hardware driver for GPIO-controlled watchdogs. GPIO pin and
-+ toggle interval settings are platform-specific. The driver
-+ will stop toggling the GPIO (i.e. machine reboots) after a
-+ 100 second timer expired and no process has written to
-+ /dev/watchdog during that time.
-+
- config PNX833X_WDT
- tristate "PNX833x Hardware Watchdog"
- depends on SOC_PNX8335
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -134,6 +134,7 @@ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt
- obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o
- obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
-+obj-$(CONFIG_GPIO_WDT) += old_gpio_wdt.o
- obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
---- /dev/null
-+++ b/drivers/watchdog/old_gpio_wdt.c
-@@ -0,0 +1,301 @@
-+/*
-+ * Driver for GPIO-controlled Hardware Watchdogs.
-+ *
-+ * Copyright (C) 2013 Mathias Adam <m.adam--linux@adamis.de>
-+ *
-+ * Replaces mtx1_wdt (driver for the MTX-1 Watchdog):
-+ *
-+ * (C) Copyright 2005 4G Systems <info@4g-systems.biz>,
-+ * All Rights Reserved.
-+ * http://www.4g-systems.biz
-+ *
-+ * (C) Copyright 2007 OpenWrt.org, Florian Fainelli <florian@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ *
-+ * Neither Michael Stickel nor 4G Systems admit liability nor provide
-+ * warranty for any of this software. This material is provided
-+ * "AS-IS" and at no charge.
-+ *
-+ * (c) Copyright 2005 4G Systems <info@4g-systems.biz>
-+ *
-+ * Release 0.01.
-+ * Author: Michael Stickel michael.stickel@4g-systems.biz
-+ *
-+ * Release 0.02.
-+ * Author: Florian Fainelli florian@openwrt.org
-+ * use the Linux watchdog/timer APIs
-+ *
-+ * Release 0.03.
-+ * Author: Mathias Adam <m.adam--linux@adamis.de>
-+ * make it a generic gpio watchdog driver
-+ *
-+ * The Watchdog is configured to reset the MTX-1
-+ * if it is not triggered for 100 seconds.
-+ * It should not be triggered more often than 1.6 seconds.
-+ *
-+ * A timer triggers the watchdog every 5 seconds, until
-+ * it is opened for the first time. After the first open
-+ * it MUST be triggered every 2..95 seconds.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/miscdevice.h>
-+#include <linux/fs.h>
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <linux/timer.h>
-+#include <linux/completion.h>
-+#include <linux/jiffies.h>
-+#include <linux/watchdog.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/uaccess.h>
-+#include <linux/gpio.h>
-+#include <linux/old_gpio_wdt.h>
-+
-+static int ticks = 100 * HZ;
-+
-+static struct {
-+ struct completion stop;
-+ spinlock_t lock;
-+ int running;
-+ struct timer_list timer;
-+ int queue;
-+ int default_ticks;
-+ unsigned long inuse;
-+ unsigned gpio;
-+ unsigned int gstate;
-+ int interval;
-+ int first_interval;
-+} gpio_wdt_device;
-+
-+static void gpio_wdt_trigger(unsigned long unused)
-+{
-+ spin_lock(&gpio_wdt_device.lock);
-+ if (gpio_wdt_device.running && ticks > 0)
-+ ticks -= gpio_wdt_device.interval;
-+
-+ /* toggle wdt gpio */
-+ gpio_wdt_device.gstate = !gpio_wdt_device.gstate;
-+ gpio_set_value(gpio_wdt_device.gpio, gpio_wdt_device.gstate);
-+
-+ if (gpio_wdt_device.queue && ticks > 0)
-+ mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.interval);
-+ else
-+ complete(&gpio_wdt_device.stop);
-+ spin_unlock(&gpio_wdt_device.lock);
-+}
-+
-+static void gpio_wdt_reset(void)
-+{
-+ ticks = gpio_wdt_device.default_ticks;
-+}
-+
-+
-+static void gpio_wdt_start(void)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&gpio_wdt_device.lock, flags);
-+ if (!gpio_wdt_device.queue) {
-+ gpio_wdt_device.queue = 1;
-+ gpio_wdt_device.gstate = 1;
-+ gpio_set_value(gpio_wdt_device.gpio, 1);
-+ mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.first_interval);
-+ }
-+ gpio_wdt_device.running++;
-+ spin_unlock_irqrestore(&gpio_wdt_device.lock, flags);
-+}
-+
-+static int gpio_wdt_stop(void)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&gpio_wdt_device.lock, flags);
-+ if (gpio_wdt_device.queue) {
-+ gpio_wdt_device.queue = 0;
-+ gpio_wdt_device.gstate = 0;
-+ gpio_set_value(gpio_wdt_device.gpio, 0);
-+ }
-+ ticks = gpio_wdt_device.default_ticks;
-+ spin_unlock_irqrestore(&gpio_wdt_device.lock, flags);
-+ return 0;
-+}
-+
-+/* Filesystem functions */
-+
-+static int gpio_wdt_open(struct inode *inode, struct file *file)
-+{
-+ if (test_and_set_bit(0, &gpio_wdt_device.inuse))
-+ return -EBUSY;
-+ return nonseekable_open(inode, file);
-+}
-+
-+
-+static int gpio_wdt_release(struct inode *inode, struct file *file)
-+{
-+ clear_bit(0, &gpio_wdt_device.inuse);
-+ return 0;
-+}
-+
-+static long gpio_wdt_ioctl(struct file *file, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ void __user *argp = (void __user *)arg;
-+ int __user *p = (int __user *)argp;
-+ unsigned int value;
-+ static const struct watchdog_info ident = {
-+ .options = WDIOF_CARDRESET,
-+ .identity = "GPIO WDT",
-+ };
-+
-+ switch (cmd) {
-+ case WDIOC_GETSUPPORT:
-+ if (copy_to_user(argp, &ident, sizeof(ident)))
-+ return -EFAULT;
-+ break;
-+ case WDIOC_GETSTATUS:
-+ case WDIOC_GETBOOTSTATUS:
-+ put_user(0, p);
-+ break;
-+ case WDIOC_SETOPTIONS:
-+ if (get_user(value, p))
-+ return -EFAULT;
-+ if (value & WDIOS_ENABLECARD)
-+ gpio_wdt_start();
-+ else if (value & WDIOS_DISABLECARD)
-+ gpio_wdt_stop();
-+ else
-+ return -EINVAL;
-+ return 0;
-+ case WDIOC_KEEPALIVE:
-+ gpio_wdt_reset();
-+ break;
-+ default:
-+ return -ENOTTY;
-+ }
-+ return 0;
-+}
-+
-+
-+static ssize_t gpio_wdt_write(struct file *file, const char *buf,
-+ size_t count, loff_t *ppos)
-+{
-+ if (!count)
-+ return -EIO;
-+ gpio_wdt_reset();
-+ return count;
-+}
-+
-+static const struct file_operations gpio_wdt_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .unlocked_ioctl = gpio_wdt_ioctl,
-+ .open = gpio_wdt_open,
-+ .write = gpio_wdt_write,
-+ .release = gpio_wdt_release,
-+};
-+
-+
-+static struct miscdevice gpio_wdt_misc = {
-+ .minor = WATCHDOG_MINOR,
-+ .name = "watchdog",
-+ .fops = &gpio_wdt_fops,
-+};
-+
-+
-+static int gpio_wdt_probe(struct platform_device *pdev)
-+{
-+ int ret;
-+ struct gpio_wdt_platform_data *gpio_wdt_data = pdev->dev.platform_data;
-+
-+ gpio_wdt_device.gpio = gpio_wdt_data->gpio;
-+ gpio_wdt_device.interval = gpio_wdt_data->interval;
-+ gpio_wdt_device.first_interval = gpio_wdt_data->first_interval;
-+ if (gpio_wdt_device.first_interval <= 0) {
-+ gpio_wdt_device.first_interval = gpio_wdt_device.interval;
-+ }
-+
-+ ret = gpio_request(gpio_wdt_device.gpio, "gpio-wdt");
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "failed to request gpio");
-+ return ret;
-+ }
-+
-+ spin_lock_init(&gpio_wdt_device.lock);
-+ init_completion(&gpio_wdt_device.stop);
-+ gpio_wdt_device.queue = 0;
-+ clear_bit(0, &gpio_wdt_device.inuse);
-+ setup_timer(&gpio_wdt_device.timer, gpio_wdt_trigger, 0L);
-+ gpio_wdt_device.default_ticks = ticks;
-+
-+ gpio_wdt_start();
-+ dev_info(&pdev->dev, "GPIO Hardware Watchdog driver (gpio=%i interval=%i/%i)\n",
-+ gpio_wdt_data->gpio, gpio_wdt_data->first_interval, gpio_wdt_data->interval);
-+ return 0;
-+}
-+
-+static int gpio_wdt_remove(struct platform_device *pdev)
-+{
-+ /* FIXME: do we need to lock this test ? */
-+ if (gpio_wdt_device.queue) {
-+ gpio_wdt_device.queue = 0;
-+ wait_for_completion(&gpio_wdt_device.stop);
-+ }
-+
-+ gpio_free(gpio_wdt_device.gpio);
-+ misc_deregister(&gpio_wdt_misc);
-+ return 0;
-+}
-+
-+static struct platform_driver gpio_wdt_driver = {
-+ .probe = gpio_wdt_probe,
-+ .remove = gpio_wdt_remove,
-+ .driver.name = "gpio-wdt",
-+ .driver.owner = THIS_MODULE,
-+};
-+
-+static int __init gpio_wdt_init(void)
-+{
-+ return platform_driver_register(&gpio_wdt_driver);
-+}
-+arch_initcall(gpio_wdt_init);
-+
-+/*
-+ * We do wdt initialization in two steps: arch_initcall probes the wdt
-+ * very early to start pinging the watchdog (misc devices are not yet
-+ * available), and later module_init() just registers the misc device.
-+ */
-+static int gpio_wdt_init_late(void)
-+{
-+ int ret;
-+
-+ ret = misc_register(&gpio_wdt_misc);
-+ if (ret < 0) {
-+ pr_err("GPIO_WDT: failed to register misc device\n");
-+ return ret;
-+ }
-+ return 0;
-+}
-+#ifndef MODULE
-+module_init(gpio_wdt_init_late);
-+#endif
-+
-+static void __exit gpio_wdt_exit(void)
-+{
-+ platform_driver_unregister(&gpio_wdt_driver);
-+}
-+module_exit(gpio_wdt_exit);
-+
-+MODULE_AUTHOR("Michael Stickel, Florian Fainelli, Mathias Adam");
-+MODULE_DESCRIPTION("Driver for GPIO hardware watchdogs");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-+MODULE_ALIAS("platform:gpio-wdt");
---- /dev/null
-+++ b/include/linux/old_gpio_wdt.h
-@@ -0,0 +1,21 @@
-+/*
-+ * Definitions for the GPIO watchdog driver
-+ *
-+ * Copyright (C) 2013 Mathias Adam <m.adam--linux@adamis.de>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#ifndef _GPIO_WDT_H_
-+#define _GPIO_WDT_H_
-+
-+struct gpio_wdt_platform_data {
-+ int gpio; /* GPIO line number */
-+ int interval; /* watchdog reset interval in system ticks */
-+ int first_interval; /* first wd reset interval in system ticks */
-+};
-+
-+#endif /* _GPIO_WDT_H_ */
+++ /dev/null
---- a/init/main.c
-+++ b/init/main.c
-@@ -362,6 +362,29 @@ static inline void setup_nr_cpu_ids(void
- static inline void smp_prepare_cpus(unsigned int maxcpus) { }
- #endif
-
-+#ifdef CONFIG_MANGLE_BOOTARGS
-+static void __init mangle_bootargs(char *command_line)
-+{
-+ char *rootdev;
-+ char *rootfs;
-+
-+ rootdev = strstr(command_line, "root=/dev/mtdblock");
-+
-+ if (rootdev)
-+ strncpy(rootdev, "mangled_rootblock=", 18);
-+
-+ rootfs = strstr(command_line, "rootfstype");
-+
-+ if (rootfs)
-+ strncpy(rootfs, "mangled_fs", 10);
-+
-+}
-+#else
-+static void __init mangle_bootargs(char *command_line)
-+{
-+}
-+#endif
-+
- /*
- * We need to store the untouched command line for future reference.
- * We also need to store the touched command line since the parameter
-@@ -530,6 +553,7 @@ asmlinkage __visible void __init start_k
- pr_notice("%s", linux_banner);
- setup_arch(&command_line);
- mm_init_cpumask(&init_mm);
-+ mangle_bootargs(command_line);
- setup_command_line(command_line);
- setup_nr_cpu_ids();
- setup_per_cpu_areas();
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -1597,6 +1597,15 @@ config EMBEDDED
- an embedded system so certain expert options are available
- for configuration.
-
-+config MANGLE_BOOTARGS
-+ bool "Rename offending bootargs"
-+ depends on EXPERT
-+ help
-+ Sometimes the bootloader passed bogus root= and rootfstype=
-+ parameters to the kernel, and while you want to ignore them,
-+ you need to know the values f.e. to support dual firmware
-+ layouts on the flash.
-+
- config HAVE_PERF_EVENTS
- bool
- help
+++ /dev/null
---- a/drivers/of/fdt.c
-+++ b/drivers/of/fdt.c
-@@ -909,6 +909,9 @@ int __init early_init_dt_scan_chosen(uns
- p = of_get_flat_dt_prop(node, "bootargs", &l);
- if (p != NULL && l > 0)
- strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
-+ p = of_get_flat_dt_prop(node, "bootargs-append", &l);
-+ if (p != NULL && l > 0)
-+ strlcat(data, p, min_t(int, strlen(data) + (int)l, COMMAND_LINE_SIZE));
-
- /*
- * CONFIG_CMDLINE is meant to be a default in case nothing else
---- a/arch/mips/kernel/prom.c
-+++ b/arch/mips/kernel/prom.c
-@@ -49,6 +49,9 @@ void * __init early_init_dt_alloc_memory
-
- void __init __dt_setup_arch(void *bph)
- {
-+ if (boot_command_line[0] == '\0')
-+ strcpy(boot_command_line, arcs_cmdline);
-+
- if (!early_init_dt_scan(bph))
- return;
-
+++ /dev/null
-We use backports for driver updates - make sure we can compile in the glue code regardless
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
-
---- a/drivers/net/wireless/ti/Kconfig
-+++ b/drivers/net/wireless/ti/Kconfig
-@@ -15,7 +15,7 @@ source "drivers/net/wireless/ti/wlcore/K
-
- config WILINK_PLATFORM_DATA
- bool "TI WiLink platform data"
-- depends on WLCORE_SDIO || WL1251_SDIO
-+ depends on WLCORE_SDIO || WL1251_SDIO || ARCH_OMAP2PLUS
- default y
- ---help---
- Small platform data bit needed to pass data to the sdio modules.
+++ /dev/null
---- a/kernel/seccomp.c
-+++ b/kernel/seccomp.c
-@@ -614,6 +614,7 @@ int __secure_computing(void)
- #ifdef CONFIG_SECCOMP_FILTER
- static u32 __seccomp_phase1_filter(int this_syscall, struct seccomp_data *sd)
- {
-+ char name[sizeof(current->comm)];
- u32 filter_ret, action;
- int data;
-
-@@ -644,6 +645,13 @@ static u32 __seccomp_phase1_filter(int t
- case SECCOMP_RET_TRACE:
- return filter_ret; /* Save the rest for phase 2. */
-
-+ case SECCOMP_RET_LOG:
-+ get_task_comm(name, current);
-+ pr_err_ratelimited("seccomp: %s [%u] tried to call non-whitelisted syscall: %d\n", name, current->pid, this_syscall);
-+ syscall_set_return_value(current, task_pt_regs(current),
-+ -data, 0);
-+ goto skip;
-+
- case SECCOMP_RET_ALLOW:
- return SECCOMP_PHASE1_OK;
-
---- a/include/uapi/linux/seccomp.h
-+++ b/include/uapi/linux/seccomp.h
-@@ -28,6 +28,7 @@
- #define SECCOMP_RET_KILL 0x00000000U /* kill the task immediately */
- #define SECCOMP_RET_TRAP 0x00030000U /* disallow and force a SIGSYS */
- #define SECCOMP_RET_ERRNO 0x00050000U /* returns an errno */
-+#define SECCOMP_RET_LOG 0x00070000U /* allow + logline */
- #define SECCOMP_RET_TRACE 0x7ff00000U /* pass to a tracer or disallow */
- #define SECCOMP_RET_ALLOW 0x7fff0000U /* allow */
-
projects / openwrt / staging / xback.git / commitdiff