ramips: ArcherC20v4: use common TP-Link dtsi file

and remove common part from dts file.

Signed-off-by: Henryk Heisig <hyniu@o2.pl>

diff --git a/target/linux/ramips/dts/ArcherC20v4.dts b/target/linux/ramips/dts/ArcherC20v4.dts
index be0c21a9a94bdf1de22f0a9f1afda891c395e685..77f70bd840ffca7f90a15cc30b664eec6d25ca2f 100644 (file)
--- a/target/linux/ramips/dts/ArcherC20v4.dts
+++ b/target/linux/ramips/dts/ArcherC20v4.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-#include "mt7628an.dtsi"
+#include "TPLINK-8M.dtsi"
 
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -9,10 +9,6 @@
        compatible = "tplink,c20-v4", "mediatek,mt7628an-soc";
        model = "TP-Link Archer C20 v4";
 
-       chosen {
-               bootargs = "console=ttyS0,115200";
-       };
-
        gpio-leds {
                compatible = "gpio-leds";
 
@@ -70,78 +66,13 @@
                        linux,code = <KEY_RFKILL>;
                };
        };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x4000000>;
-       };
-};
-
-&spi0 {
-       status = "okay";
-
-       m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <10000000>;
-               m25p,chunked-io = <32>;
-
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x20000>;
-                       read-only;
-               };
-
-               partition@20000 {
-                       label = "firmware";
-                       reg = <0x20000 0x7a0000>;
-               };
-
-               partition@7c0000 {
-                       label = "config";
-                       reg = <0x7c0000 0x10000>;
-                       read-only;
-               };
-
-               rom: partition@7d0000 {
-                       label = "rom";
-                       reg = <0x7d0000 0x10000>;
-                       read-only;
-               };
-
-               partition@7e0000 {
-                       label = "romfile";
-                       reg = <0x7e0000 0x10000>;
-                       read-only;
-               };
-
-               radio: partition@7f0000 {
-                       label = "radio";
-                       reg = <0x7f0000 0x10000>;
-                       read-only;
-               };
-       };
-};
-
-&ehci {
-       status = "disabled";
-};
-
-&ohci {
-       status = "disabled";
 };
 
 &wmac {
-       status = "okay";
-       mediatek,mtd-eeprom = <&radio 0x0>;
-       mtd-mac-address = <&rom 0xf100>;
        mtd-mac-address-increment = <(-2)>;
 };
 
 &ethernet {
-       mtd-mac-address = <&rom 0xf100>;
        mediatek,portmap = "wllll";
 };
 
@@ -161,9 +92,9 @@
                mt76@0,0 {
                        reg = <0x0000 0 0 0 0>;
                        device_type = "pci";
-                       mediatek,mtd-eeprom = <&radio 0x8000>;
+                       mediatek,mtd-eeprom = <&factory 0x28000>;
                        ieee80211-freq-limit = <5000000 6000000>;
-                       mtd-mac-address = <&rom 0xf100>;
+                       mtd-mac-address = <&factory 0xf100>;
                        mtd-mac-address-increment = <(-1)>;
                };
        };