},
[1] = {
.name = "dwc_otg_irq",
- .start = LTQ_USB_INT,
.flags = IORESOURCE_IRQ,
},
};
struct irq_data d;
d.irq = resources[1].start;
ltq_enable_irq(&d);
+ resources[1].start = ltq_is_ase() ? LTQ_USB_ASE_INT : LTQ_USB_INT;
platform_dev.dev.platform_data = (void*) pin;
return platform_device_register(&platform_dev);
}
-From 282f1ca84b35f3be68abc4fd8b52e229f3cb6bb7 Mon Sep 17 00:00:00 2001
+From 8817c547f92016b9276ffec88b708c2c16d1f0f1 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 8 Mar 2012 13:23:53 +0100
-Subject: [PATCH 01/70] GPIO: add bindings for managed devices
+Subject: [PATCH 01/73] GPIO: add bindings for managed devices
This patch adds 2 functions that allow managed devices to request GPIOs.
These GPIOs will then be managed by drivers/base/devres.c.
3 files changed, 95 insertions(+), 1 deletions(-)
create mode 100644 drivers/gpio/devres.c
+diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
+index 4e018d6..76dbd3f 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -2,7 +2,7 @@
# Device drivers. Generally keep list sorted alphabetically
obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o
+diff --git a/drivers/gpio/devres.c b/drivers/gpio/devres.c
+new file mode 100644
+index 0000000..3dd2939
--- /dev/null
+++ b/drivers/gpio/devres.c
@@ -0,0 +1,90 @@
+ gpio_free(gpio);
+}
+EXPORT_SYMBOL(devm_gpio_free);
+diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
+index 8c86210..8601a02 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
-@@ -175,6 +175,10 @@ extern int gpio_request_one(unsigned gpi
+@@ -175,6 +175,10 @@ extern int gpio_request_one(unsigned gpio, unsigned long flags, const char *labe
extern int gpio_request_array(const struct gpio *array, size_t num);
extern void gpio_free_array(const struct gpio *array, size_t num);
#ifdef CONFIG_GPIO_SYSFS
/*
+--
+1.7.9.1
+
-From b859096bdc4b029357217af98874d6feec3ff4bd Mon Sep 17 00:00:00 2001
+From 770d7934edcc0b4125cd1ef1ad102ae2c2e02bca Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Fri, 16 Mar 2012 16:27:35 +0100
-Subject: [PATCH 02/70] MIPS: remove unused prototype kgdb_config
+Subject: [PATCH 02/73] MIPS: remove unused prototype kgdb_config
---
arch/mips/include/asm/mips-boards/generic.h | 4 ----
1 files changed, 0 insertions(+), 4 deletions(-)
+diff --git a/arch/mips/include/asm/mips-boards/generic.h b/arch/mips/include/asm/mips-boards/generic.h
+index 46c0856..6e23ceb 100644
--- a/arch/mips/include/asm/mips-boards/generic.h
+++ b/arch/mips/include/asm/mips-boards/generic.h
@@ -93,8 +93,4 @@ extern void mips_pcibios_init(void);
-#endif
-
#endif /* __ASM_MIPS_BOARDS_GENERIC_H */
+--
+1.7.9.1
+
-From 63e9d017ce90dc1cd0822bace72e4e391feafdab Mon Sep 17 00:00:00 2001
+From 1427dd3518e0c950c612157a67e56069000cd29c Mon Sep 17 00:00:00 2001
From: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Date: Fri, 17 Feb 2012 22:32:18 +0100
-Subject: [PATCH 03/70] MTD: MIPS: lantiq: reintroduce support for cmdline
+Subject: [PATCH 03/73] MTD: MIPS: lantiq: reintroduce support for cmdline
partitions
Since commit ca97dec2ab5c87e9fbdf7e882e1820004a3966fa the
drivers/mtd/maps/lantiq-flash.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
+diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
+index 4f10e27..764d468 100644
--- a/drivers/mtd/maps/lantiq-flash.c
+++ b/drivers/mtd/maps/lantiq-flash.c
@@ -45,6 +45,7 @@ struct ltq_mtd {
static map_word
ltq_read16(struct map_info *map, unsigned long adr)
-@@ -168,7 +169,7 @@ ltq_mtd_probe(struct platform_device *pd
+@@ -168,7 +169,7 @@ ltq_mtd_probe(struct platform_device *pdev)
cfi->addr_unlock1 ^= 1;
cfi->addr_unlock2 ^= 1;
ltq_mtd_data->parts, ltq_mtd_data->nr_parts);
if (err) {
dev_err(&pdev->dev, "failed to add partitions\n");
+--
+1.7.9.1
+
-From e4e27fbcaf2caa2a3e3ef45c736b4bb14f91ecfe Mon Sep 17 00:00:00 2001
+From 3778c58845f39b145b80ca357ca22a3095a8dfb1 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 13 Mar 2012 18:03:33 +0100
-Subject: [PATCH 04/70] MTD: add m25p80 id for mx25l2005a
+Subject: [PATCH 04/73] MTD: add m25p80 id for mx25l2005a
---
drivers/mtd/devices/m25p80.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
+diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
+index 884904d..3f37f5f 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
-@@ -684,6 +684,7 @@ static const struct spi_device_id m25p_i
+@@ -676,6 +676,7 @@ static const struct spi_device_id m25p_ids[] = {
{ "640s33b", INFO(0x898913, 0, 64 * 1024, 128, 0) },
/* Macronix */
{ "mx25l4005a", INFO(0xc22013, 0, 64 * 1024, 8, SECT_4K) },
{ "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16, 0) },
{ "mx25l1606e", INFO(0xc22015, 0, 64 * 1024, 32, SECT_4K) },
+--
+1.7.9.1
+
-From cf7086d4c2f7caeccd019c0a57bf1566c72c13ee Mon Sep 17 00:00:00 2001
+From 222ee25fab35b3c3a4c63903b6af4eb0d0556750 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Wed, 10 Aug 2011 14:57:04 +0200
-Subject: [PATCH 05/70] MIPS: lantiq: reorganize xway code
+Subject: [PATCH 05/73] MIPS: lantiq: reorganize xway code
Inside the folder arch/mips/lantiq/xway, there were alot of small files with
lots of duplicated code. This patch adds a wrapper function for inserting and
delete mode 100644 arch/mips/lantiq/xway/setup-xway.c
create mode 100644 arch/mips/lantiq/xway/sysctrl.c
+diff --git a/arch/mips/include/asm/mach-lantiq/lantiq.h b/arch/mips/include/asm/mach-lantiq/lantiq.h
+index ce2f029..66d7300 100644
--- a/arch/mips/include/asm/mach-lantiq/lantiq.h
+++ b/arch/mips/include/asm/mach-lantiq/lantiq.h
@@ -9,6 +9,7 @@
extern unsigned int ltq_get_cpu_ver(void);
extern unsigned int ltq_get_soc_type(void);
-@@ -51,7 +43,9 @@ extern void ltq_enable_irq(struct irq_da
+@@ -51,7 +43,9 @@ extern void ltq_enable_irq(struct irq_data *data);
/* find out what caused the last cpu reset */
extern int ltq_reset_cause(void);
#define IOPORT_RESOURCE_START 0x10000000
#define IOPORT_RESOURCE_END 0xffffffff
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index 8a3c6be..9b7ee366 100644
--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
@@ -61,6 +61,8 @@
static inline int ltq_is_ar9(void)
{
+diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c
+index 77ed70f..39eef7f 100644
--- a/arch/mips/lantiq/clk.c
+++ b/arch/mips/lantiq/clk.c
@@ -22,6 +22,7 @@
- if (insert_resource(&iomem_resource, <q_cgu_resource) < 0)
- panic("Failed to insert cgu memory\n");
-+ ltq_soc_init();
-
+-
- if (request_mem_region(ltq_cgu_resource.start,
- resource_size(<q_cgu_resource), "cgu") < 0)
- panic("Failed to request cgu memory\n");
--
++ ltq_soc_init();
+
- ltq_cgu_membase = ioremap_nocache(ltq_cgu_resource.start,
- resource_size(<q_cgu_resource));
- if (!ltq_cgu_membase) {
+ pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
clk_put(clk);
}
+diff --git a/arch/mips/lantiq/devices.c b/arch/mips/lantiq/devices.c
+index de1cb2b..7193d78 100644
--- a/arch/mips/lantiq/devices.c
+++ b/arch/mips/lantiq/devices.c
@@ -27,12 +27,8 @@
static struct platform_device ltq_nor = {
.name = "ltq_nor",
-@@ -47,12 +43,8 @@ void __init ltq_register_nor(struct phys
+@@ -47,12 +43,8 @@ void __init ltq_register_nor(struct physmap_flash_data *data)
}
/* watchdog */
IRQ_RES(tx, LTQ_ASC_TIR(1)),
IRQ_RES(rx, LTQ_ASC_RIR(1)),
IRQ_RES(err, LTQ_ASC_EIR(1)),
+diff --git a/arch/mips/lantiq/devices.h b/arch/mips/lantiq/devices.h
+index 2947bb1..a03c23f 100644
--- a/arch/mips/lantiq/devices.h
+++ b/arch/mips/lantiq/devices.h
@@ -14,6 +14,10 @@
extern void ltq_register_nor(struct physmap_flash_data *data);
extern void ltq_register_wdt(void);
+diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
+index e34fcfd..e3b1e25 100644
--- a/arch/mips/lantiq/prom.c
+++ b/arch/mips/lantiq/prom.c
@@ -16,6 +16,10 @@
static struct ltq_soc_info soc_info;
unsigned int ltq_get_cpu_ver(void)
-@@ -55,16 +59,51 @@ static void __init prom_init_cmdline(voi
+@@ -55,16 +59,51 @@ static void __init prom_init_cmdline(void)
}
}
- struct clk *clk;
+ __iomem void *ret = NULL;
+ struct resource *lookup = lookup_resource(&iomem_resource, res->start);
-
++
+ if (lookup && strcmp(lookup->name, res->name)) {
+ pr_err("conflicting memory range %s\n", res->name);
+ return NULL;
+ pr_err("Failed to request %s memory\n", res->name);
+ goto err_res;
+ }
-+
+
+ ret = ioremap_nocache(res->start, resource_size(res));
+ if (!ret)
+ goto err_mem;
soc_info.sys_type[LTQ_SYS_TYPE_LEN - 1] = '\0';
pr_info("SoC: %s\n", soc_info.sys_type);
prom_init_cmdline();
+diff --git a/arch/mips/lantiq/prom.h b/arch/mips/lantiq/prom.h
+index b4229d9..51dba1b 100644
--- a/arch/mips/lantiq/prom.h
+++ b/arch/mips/lantiq/prom.h
@@ -9,17 +9,21 @@
extern void ltq_soc_setup(void);
#endif
+diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
+index c517f2e..6678402 100644
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
@@ -1,7 +1,7 @@
obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
+diff --git a/arch/mips/lantiq/xway/devices.c b/arch/mips/lantiq/xway/devices.c
+index d614aa7..f97e565 100644
--- a/arch/mips/lantiq/xway/devices.c
+++ b/arch/mips/lantiq/xway/devices.c
@@ -31,22 +31,9 @@
static struct platform_device ltq_etop = {
.name = "ltq_etop",
+diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
+index cbb6ae5..60cd11f 100644
--- a/arch/mips/lantiq/xway/dma.c
+++ b/arch/mips/lantiq/xway/dma.c
@@ -24,6 +24,8 @@
if (!ltq_dma_membase)
panic("Failed to remap dma memory\n");
+diff --git a/arch/mips/lantiq/xway/ebu.c b/arch/mips/lantiq/xway/ebu.c
+deleted file mode 100644
+index 033b318..0000000
--- a/arch/mips/lantiq/xway/ebu.c
+++ /dev/null
@@ -1,52 +0,0 @@
-}
-
-postcore_initcall(lantiq_ebu_init);
+diff --git a/arch/mips/lantiq/xway/pmu.c b/arch/mips/lantiq/xway/pmu.c
+deleted file mode 100644
+index 39f0d26..0000000
--- a/arch/mips/lantiq/xway/pmu.c
+++ /dev/null
@@ -1,69 +0,0 @@
-}
-
-core_initcall(ltq_pmu_init);
+diff --git a/arch/mips/lantiq/xway/prom-ase.c b/arch/mips/lantiq/xway/prom-ase.c
+index ae4959a..3f86a3b 100644
--- a/arch/mips/lantiq/xway/prom-ase.c
+++ b/arch/mips/lantiq/xway/prom-ase.c
@@ -13,6 +13,7 @@
#include "../prom.h"
#define SOC_AMAZON_SE "Amazon_SE"
-@@ -26,6 +27,7 @@ void __init ltq_soc_detect(struct ltq_so
+@@ -26,6 +27,7 @@ void __init ltq_soc_detect(struct ltq_soc_info *i)
{
i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
switch (i->partnum) {
case SOC_ID_AMAZON_SE:
i->name = SOC_AMAZON_SE;
-@@ -37,3 +39,10 @@ void __init ltq_soc_detect(struct ltq_so
+@@ -37,3 +39,10 @@ void __init ltq_soc_detect(struct ltq_soc_info *i)
break;
}
}
+ ltq_register_gpio();
+ ltq_register_wdt();
+}
+diff --git a/arch/mips/lantiq/xway/prom-xway.c b/arch/mips/lantiq/xway/prom-xway.c
+index 2228133..d823a92 100644
--- a/arch/mips/lantiq/xway/prom-xway.c
+++ b/arch/mips/lantiq/xway/prom-xway.c
@@ -13,6 +13,7 @@
#include "../prom.h"
#define SOC_DANUBE "Danube"
-@@ -28,6 +29,7 @@ void __init ltq_soc_detect(struct ltq_so
+@@ -28,6 +29,7 @@ void __init ltq_soc_detect(struct ltq_soc_info *i)
{
i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
switch (i->partnum) {
case SOC_ID_DANUBE1:
case SOC_ID_DANUBE2:
-@@ -52,3 +54,11 @@ void __init ltq_soc_detect(struct ltq_so
+@@ -52,3 +54,11 @@ void __init ltq_soc_detect(struct ltq_soc_info *i)
break;
}
}
+ ltq_register_gpio();
+ ltq_register_wdt();
+}
+diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
+index 3d41f0b..ca2212a 100644
--- a/arch/mips/lantiq/xway/reset.c
+++ b/arch/mips/lantiq/xway/reset.c
@@ -15,6 +15,8 @@
if (!ltq_rcu_membase)
panic("Failed to remap rcu memory\n");
+diff --git a/arch/mips/lantiq/xway/setup-ase.c b/arch/mips/lantiq/xway/setup-ase.c
+deleted file mode 100644
+index f6f3267..0000000
--- a/arch/mips/lantiq/xway/setup-ase.c
+++ /dev/null
@@ -1,19 +0,0 @@
- ltq_register_gpio();
- ltq_register_wdt();
-}
+diff --git a/arch/mips/lantiq/xway/setup-xway.c b/arch/mips/lantiq/xway/setup-xway.c
+deleted file mode 100644
+index c292f64..0000000
--- a/arch/mips/lantiq/xway/setup-xway.c
+++ /dev/null
@@ -1,20 +0,0 @@
- ltq_register_gpio();
- ltq_register_wdt();
-}
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+new file mode 100644
+index 0000000..8fd13a1
--- /dev/null
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -0,0 +1,78 @@
+ /* make sure to unprotect the memory region where flash is located */
+ ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0);
+}
+diff --git a/drivers/watchdog/lantiq_wdt.c b/drivers/watchdog/lantiq_wdt.c
+index 102aed0..179bf98 100644
--- a/drivers/watchdog/lantiq_wdt.c
+++ b/drivers/watchdog/lantiq_wdt.c
@@ -16,7 +16,7 @@
/* Section 3.4 of the datasheet
* The password sequence protects the WDT control register from unintended
+--
+1.7.9.1
+
-From 35f0a707698fc8f20e4164a704d7ac6af3342fb8 Mon Sep 17 00:00:00 2001
+From 2daf93364658fd26bf583b7a46b81c08fddaf1e4 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Fri, 11 Nov 2011 12:45:24 +0100
-Subject: [PATCH 06/70] MIPS: lantiq: change ltq_request_gpio() call signature
+Subject: [PATCH 06/73] MIPS: lantiq: change ltq_request_gpio() call signature
ltq_request_gpio() was using alt0/1 to multiplex the function of GPIO pins.
This was XWAY specific. In order to also accomodate SoCs that require more bits
arch/mips/pci/pci-lantiq.c | 36 +++++++++----------
4 files changed, 26 insertions(+), 28 deletions(-)
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index 9b7ee366..87f6d24 100644
--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
@@ -135,8 +135,8 @@ extern __iomem void *ltq_ebu_membase;
extern void ltq_pmu_enable(unsigned int module);
extern void ltq_pmu_disable(unsigned int module);
extern void ltq_cgu_enable(unsigned int clk);
+diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c
+index d2fa98f..f204f6c 100644
--- a/arch/mips/lantiq/xway/gpio.c
+++ b/arch/mips/lantiq/xway/gpio.c
@@ -48,8 +48,8 @@ int irq_to_gpio(unsigned int gpio)
{
int id = 0;
-@@ -67,13 +67,13 @@ int ltq_gpio_request(unsigned int pin, u
+@@ -67,13 +67,13 @@ int ltq_gpio_request(unsigned int pin, unsigned int alt0,
pin -= PINS_PER_PORT;
id++;
}
ltq_gpio_setbit(ltq_gpio_port[id].membase,
LTQ_GPIO_ALTSEL1, pin);
else
+diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
+index ff9991c..2c78660 100644
--- a/arch/mips/lantiq/xway/gpio_stp.c
+++ b/arch/mips/lantiq/xway/gpio_stp.c
@@ -79,9 +79,9 @@ static struct gpio_chip ltq_stp_chip = {
/* sane defaults */
ltq_stp_w32(0, LTQ_STP_AR);
+diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
+index be1e1af..c001c5a 100644
--- a/arch/mips/pci/pci-lantiq.c
+++ b/arch/mips/pci/pci-lantiq.c
@@ -70,28 +70,27 @@
ltq_pci_req_mask = (gpio >> PCI_REQ_SHIFT) & PCI_REQ_MASK;
}
+--
+1.7.9.1
+
-From 03f55cae0f5d9a4c30f935abf8d621ced64ae425 Mon Sep 17 00:00:00 2001
+From 318b9c6242418e1568430c7768371d2bd556109a Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 11 Aug 2011 12:25:55 +0200
-Subject: [PATCH 07/70] MIPS: lantiq: make irq.c support the FALC-ON
+Subject: [PATCH 07/73] MIPS: lantiq: make irq.c support the FALC-ON
There are minor differences in how irqs work on xway and falcon socs.
Xway needs 2 quirks that we need to disable for falcon to also work with
arch/mips/lantiq/irq.c | 24 +++++++++++++-----------
1 files changed, 13 insertions(+), 11 deletions(-)
+diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
+index f9737bb..17c057f 100644
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
-@@ -195,7 +195,7 @@ static void ltq_hw_irqdispatch(int modul
+@@ -195,7 +195,7 @@ static void ltq_hw_irqdispatch(int module)
do_IRQ((int)irq + INT_NUM_IM0_IRL0 + (INT_NUM_IM_OFFSET * module));
/* if this is a EBU irq, we need to ack it or get a deadlock */
+ if (LTQ_EIU_BASE_ADDR) {
+ if (insert_resource(&iomem_resource, <q_eiu_resource) < 0)
+ panic("Failed to insert eiu memory\n");
-+
-+ if (request_mem_region(ltq_eiu_resource.start,
-+ resource_size(<q_eiu_resource), "eiu") < 0)
-+ panic("Failed to request eiu memory\n");
- if (request_mem_region(ltq_eiu_resource.start,
- resource_size(<q_eiu_resource), "eiu") < 0)
- panic("Failed to request eiu memory\n");
--
++ if (request_mem_region(ltq_eiu_resource.start,
++ resource_size(<q_eiu_resource), "eiu") < 0)
++ panic("Failed to request eiu memory\n");
+
- ltq_eiu_membase = ioremap_nocache(ltq_eiu_resource.start,
+ ltq_eiu_membase = ioremap_nocache(ltq_eiu_resource.start,
resource_size(<q_eiu_resource));
irq_set_chip_and_handler(i, <q_eiu_type,
handle_level_irq);
/* EIU3-5 only exist on ar9 and vr9 */
+--
+1.7.9.1
+
-From d54a53bc8bc25bf2f9076013f89b30cb9103f99f Mon Sep 17 00:00:00 2001
+From 9124a4d02b182c47c61fc9e58234cde9a070d2d5 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 11 Aug 2011 14:33:04 +0200
-Subject: [PATCH 08/70] MIPS: lantiq: add basic support for FALC-ON
+Subject: [PATCH 08/73] MIPS: lantiq: add basic support for FALC-ON
Adds support for the FALC-ON SoC. This SoC is from the FTTH/GPON SoC family.
create mode 100644 arch/mips/lantiq/falcon/reset.c
create mode 100644 arch/mips/lantiq/falcon/sysctrl.c
+diff --git a/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h b/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h
+new file mode 100644
+index 0000000..4dc6466
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h
@@ -0,0 +1,268 @@
+#define FALCON_IRQ_VPE0_PMCIR (INT_NUM_IM4_IRL0 + 31)
+
+#endif /* _FALCON_IRQ__ */
+diff --git a/arch/mips/include/asm/mach-lantiq/falcon/irq.h b/arch/mips/include/asm/mach-lantiq/falcon/irq.h
+new file mode 100644
+index 0000000..2caccd9
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/falcon/irq.h
@@ -0,0 +1,18 @@
+#include_next <irq.h>
+
+#endif
+diff --git a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+new file mode 100644
+index 0000000..b074748
--- /dev/null
+++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
@@ -0,0 +1,143 @@
+
+#endif /* CONFIG_SOC_FALCON */
+#endif /* _LTQ_XWAY_H__ */
+diff --git a/arch/mips/include/asm/mach-lantiq/lantiq.h b/arch/mips/include/asm/mach-lantiq/lantiq.h
+index 66d7300..188de0f 100644
--- a/arch/mips/include/asm/mach-lantiq/lantiq.h
+++ b/arch/mips/include/asm/mach-lantiq/lantiq.h
-@@ -25,6 +25,7 @@ extern unsigned int ltq_get_soc_type(voi
+@@ -25,6 +25,7 @@ extern unsigned int ltq_get_soc_type(void);
/* clock speeds */
#define CLOCK_60M 60000000
#define CLOCK_83M 83333333
#define CLOCK_111M 111111111
#define CLOCK_133M 133333333
#define CLOCK_167M 166666667
+diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
+index 3fccf21..cb6b39f 100644
--- a/arch/mips/lantiq/Kconfig
+++ b/arch/mips/lantiq/Kconfig
@@ -16,8 +16,12 @@ config SOC_XWAY
+source "arch/mips/lantiq/falcon/Kconfig"
endif
+diff --git a/arch/mips/lantiq/Makefile b/arch/mips/lantiq/Makefile
+index e5dae0e..7e9c69e 100644
--- a/arch/mips/lantiq/Makefile
+++ b/arch/mips/lantiq/Makefile
-@@ -9,3 +9,4 @@ obj-y := irq.o setup.o clk.o prom.o devi
+@@ -9,3 +9,4 @@ obj-y := irq.o setup.o clk.o prom.o devices.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_SOC_TYPE_XWAY) += xway/
+obj-$(CONFIG_SOC_FALCON) += falcon/
+diff --git a/arch/mips/lantiq/Platform b/arch/mips/lantiq/Platform
+index f3dff05..b3ec498 100644
--- a/arch/mips/lantiq/Platform
+++ b/arch/mips/lantiq/Platform
@@ -6,3 +6,4 @@ platform-$(CONFIG_LANTIQ) += lantiq/
load-$(CONFIG_LANTIQ) = 0xffffffff80002000
cflags-$(CONFIG_SOC_TYPE_XWAY) += -I$(srctree)/arch/mips/include/asm/mach-lantiq/xway
+cflags-$(CONFIG_SOC_FALCON) += -I$(srctree)/arch/mips/include/asm/mach-lantiq/falcon
+diff --git a/arch/mips/lantiq/falcon/Makefile b/arch/mips/lantiq/falcon/Makefile
+new file mode 100644
+index 0000000..e9c7455
--- /dev/null
+++ b/arch/mips/lantiq/falcon/Makefile
@@ -0,0 +1 @@
+obj-y := clk.o prom.o reset.o sysctrl.o devices.o
+diff --git a/arch/mips/lantiq/falcon/clk.c b/arch/mips/lantiq/falcon/clk.c
+new file mode 100644
+index 0000000..afe1b52
--- /dev/null
+++ b/arch/mips/lantiq/falcon/clk.c
@@ -0,0 +1,44 @@
+ return CLOCK_100M;
+}
+EXPORT_SYMBOL(ltq_get_fpi_hz);
+diff --git a/arch/mips/lantiq/falcon/devices.c b/arch/mips/lantiq/falcon/devices.c
+new file mode 100644
+index 0000000..c4606f2
--- /dev/null
+++ b/arch/mips/lantiq/falcon/devices.c
@@ -0,0 +1,87 @@
+{
+ platform_device_register(<q_flash_nand);
+}
+diff --git a/arch/mips/lantiq/falcon/devices.h b/arch/mips/lantiq/falcon/devices.h
+new file mode 100644
+index 0000000..e802a7c
--- /dev/null
+++ b/arch/mips/lantiq/falcon/devices.h
@@ -0,0 +1,18 @@
+extern void falcon_register_nand(void);
+
+#endif
+diff --git a/arch/mips/lantiq/falcon/prom.c b/arch/mips/lantiq/falcon/prom.c
+new file mode 100644
+index 0000000..b50d6f9
--- /dev/null
+++ b/arch/mips/lantiq/falcon/prom.c
@@ -0,0 +1,93 @@
+ break;
+ }
+}
+diff --git a/arch/mips/lantiq/falcon/reset.c b/arch/mips/lantiq/falcon/reset.c
+new file mode 100644
+index 0000000..cbcadc5
--- /dev/null
+++ b/arch/mips/lantiq/falcon/reset.c
@@ -0,0 +1,87 @@
+}
+
+arch_initcall(mips_reboot_setup);
+diff --git a/arch/mips/lantiq/falcon/sysctrl.c b/arch/mips/lantiq/falcon/sysctrl.c
+new file mode 100644
+index 0000000..905a142
--- /dev/null
+++ b/arch/mips/lantiq/falcon/sysctrl.c
@@ -0,0 +1,183 @@
+
+ ltq_gpe_enable();
+}
+--
+1.7.9.1
+
-From 95e7c9e7b37b06462c8b3b8431dc64d60369eb38 Mon Sep 17 00:00:00 2001
+From 61cbe7fcc29f439740e004ca967da852fda58b62 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 11 Aug 2011 14:35:02 +0200
-Subject: [PATCH 09/70] MIPS: lantiq: add support for FALC-ON GPIOs
+Subject: [PATCH 09/73] MIPS: lantiq: add support for FALC-ON GPIOs
FALC-ON uses a different GPIO core than the other Lantiq SoCs. This patch adds
the new driver.
4 files changed, 443 insertions(+), 1 deletions(-)
create mode 100644 arch/mips/lantiq/falcon/gpio.c
+diff --git a/arch/mips/lantiq/falcon/Makefile b/arch/mips/lantiq/falcon/Makefile
+index e9c7455..de72209 100644
--- a/arch/mips/lantiq/falcon/Makefile
+++ b/arch/mips/lantiq/falcon/Makefile
@@ -1 +1 @@
-obj-y := clk.o prom.o reset.o sysctrl.o devices.o
+obj-y := clk.o prom.o reset.o sysctrl.o devices.o gpio.o
+diff --git a/arch/mips/lantiq/falcon/devices.c b/arch/mips/lantiq/falcon/devices.c
+index c4606f2..4f47b44 100644
--- a/arch/mips/lantiq/falcon/devices.c
+++ b/arch/mips/lantiq/falcon/devices.c
@@ -9,6 +9,7 @@
+ ltq_sysctl_activate(SYSCTL_SYS1,
+ ACTS_PADCTRL3 | ACTS_PADCTRL4 | ACTS_P3 | ACTS_P4);
+}
+diff --git a/arch/mips/lantiq/falcon/devices.h b/arch/mips/lantiq/falcon/devices.h
+index e802a7c..18be8b6 100644
--- a/arch/mips/lantiq/falcon/devices.h
+++ b/arch/mips/lantiq/falcon/devices.h
@@ -14,5 +14,7 @@
+extern void falcon_register_gpio_extra(void);
#endif
+diff --git a/arch/mips/lantiq/falcon/gpio.c b/arch/mips/lantiq/falcon/gpio.c
+new file mode 100644
+index 0000000..28f8639
--- /dev/null
+++ b/arch/mips/lantiq/falcon/gpio.c
@@ -0,0 +1,399 @@
+}
+
+postcore_initcall(falcon_gpio_init);
+--
+1.7.9.1
+
-From 9397aa9584bade07ae667ecd5135653f9c04e236 Mon Sep 17 00:00:00 2001
+From ce27aac6ea9503ae4be0f65423424d92a714d9da Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 11 Aug 2011 14:09:35 +0200
-Subject: [PATCH 10/70] MIPS: lantiq: add support for the EASY98000 evaluation
+Subject: [PATCH 10/73] MIPS: lantiq: add support for the EASY98000 evaluation
board
This patch adds the machine code for the EASY9800 evaluation board.
create mode 100644 arch/mips/lantiq/falcon/Kconfig
create mode 100644 arch/mips/lantiq/falcon/mach-easy98000.c
+diff --git a/arch/mips/lantiq/falcon/Kconfig b/arch/mips/lantiq/falcon/Kconfig
+new file mode 100644
+index 0000000..03e999d
--- /dev/null
+++ b/arch/mips/lantiq/falcon/Kconfig
@@ -0,0 +1,11 @@
+endmenu
+
+endif
+diff --git a/arch/mips/lantiq/falcon/Makefile b/arch/mips/lantiq/falcon/Makefile
+index de72209..56b22eb 100644
--- a/arch/mips/lantiq/falcon/Makefile
+++ b/arch/mips/lantiq/falcon/Makefile
@@ -1 +1,2 @@
obj-y := clk.o prom.o reset.o sysctrl.o devices.o gpio.o
+obj-$(CONFIG_LANTIQ_MACH_EASY98000) += mach-easy98000.o
+diff --git a/arch/mips/lantiq/falcon/mach-easy98000.c b/arch/mips/lantiq/falcon/mach-easy98000.c
+new file mode 100644
+index 0000000..361b8f0
--- /dev/null
+++ b/arch/mips/lantiq/falcon/mach-easy98000.c
@@ -0,0 +1,110 @@
+ "EASY98000NAND",
+ "EASY98000 Eval Board (NAND Flash)",
+ easy98000nand_init);
+diff --git a/arch/mips/lantiq/machtypes.h b/arch/mips/lantiq/machtypes.h
+index 7e01b8c..dfc6af7 100644
--- a/arch/mips/lantiq/machtypes.h
+++ b/arch/mips/lantiq/machtypes.h
@@ -15,6 +15,11 @@ enum lantiq_mach_type {
};
#endif
+--
+1.7.9.1
+
-From 68e9e86dda22c491e5e3c44271a91aefcf636434 Mon Sep 17 00:00:00 2001
+From 993160b530efe9b0d3f0bc4551954a4c3344beeb Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sat, 20 Aug 2011 18:55:13 +0200
-Subject: [PATCH 11/70] MIPS: lantiq: fix early printk
+Subject: [PATCH 11/73] MIPS: lantiq: fix early printk
The code was using a 32bit write operations in the early_printk code. This
resulted in 3 zero bytes also being written to the serial port. This patch
arch/mips/lantiq/early_printk.c | 14 ++++++++------
2 files changed, 14 insertions(+), 6 deletions(-)
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index 87f6d24..e31f52d 100644
--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
@@ -34,6 +34,12 @@
/* RCU - reset control unit */
#define LTQ_RCU_BASE_ADDR 0x1F203000
#define LTQ_RCU_SIZE 0x1000
+diff --git a/arch/mips/lantiq/early_printk.c b/arch/mips/lantiq/early_printk.c
+index 972e05f..5089075 100644
--- a/arch/mips/lantiq/early_printk.c
+++ b/arch/mips/lantiq/early_printk.c
@@ -12,11 +12,13 @@
+ ltq_w8(c, LTQ_ASC_TBUF);
local_irq_restore(flags);
}
+--
+1.7.9.1
+
-From 3be934b64f874e6cd2af7945f4fc441c7fadb34f Mon Sep 17 00:00:00 2001
+From 9c1b1cde50b09dd3679d74cde07694cee32c8b19 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Fri, 12 Aug 2011 16:27:38 +0200
-Subject: [PATCH 12/70] MIPS: lantiq: fix cmdline parsing
+Subject: [PATCH 12/73] MIPS: lantiq: fix cmdline parsing
The code tested if the KSEG1 mapped address of argv was != 0. We need to use
CPHYSADDR instead to make the conditional actually work.
arch/mips/lantiq/prom.c | 6 ++++--
1 files changed, 4 insertions(+), 2 deletions(-)
+diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
+index e3b1e25..acb8921 100644
--- a/arch/mips/lantiq/prom.c
+++ b/arch/mips/lantiq/prom.c
-@@ -49,10 +49,12 @@ static void __init prom_init_cmdline(voi
+@@ -49,10 +49,12 @@ static void __init prom_init_cmdline(void)
char **argv = (char **) KSEG1ADDR(fw_arg1);
int i;
strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
}
+--
+1.7.9.1
+
-From 556ba7f7149a0350a47ecf26185aed99c8d87176 Mon Sep 17 00:00:00 2001
+From 1314356c316e79f9887ac12b9cdf2ddba24d34a5 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 27 Oct 2011 20:06:05 +0200
-Subject: [PATCH 13/70] MIPS: lantiq: fix STP gpio groups
+Subject: [PATCH 13/73] MIPS: lantiq: fix STP gpio groups
The STP engine has 3 groups of 8 pins. Only the first was activated by default.
This patch activates the 2 missing groups.
arch/mips/lantiq/xway/gpio_stp.c | 7 +++++--
1 files changed, 5 insertions(+), 2 deletions(-)
+diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
+index 2c78660..cb6f170 100644
--- a/arch/mips/lantiq/xway/gpio_stp.c
+++ b/arch/mips/lantiq/xway/gpio_stp.c
@@ -35,6 +35,8 @@
/* stp are update periodically by the FPI bus */
ltq_stp_w32_mask(LTQ_STP_UPD_MASK, LTQ_STP_UPD_FPI, LTQ_STP_CON1);
+--
+1.7.9.1
+
-From e97f45d255f4a223d38e2f39c1ddf7a3e0766527 Mon Sep 17 00:00:00 2001
+From cf06a3358f752a7d1247498f1e9409b66b23a603 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 27 Oct 2011 20:06:30 +0200
-Subject: [PATCH 14/70] MIPS: lantiq: fix pull gpio up resistors usage
+Subject: [PATCH 14/73] MIPS: lantiq: fix pull gpio up resistors usage
The register that enables a gpios internal pullups was not used. This patch
makes sure the pullups are activated correctly.
arch/mips/lantiq/xway/gpio.c | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
+diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c
+index f204f6c..14ff7c7 100644
--- a/arch/mips/lantiq/xway/gpio.c
+++ b/arch/mips/lantiq/xway/gpio.c
@@ -21,6 +21,8 @@
#define PINS_PER_PORT 16
#define MAX_PORTS 3
-@@ -106,6 +108,8 @@ static int ltq_gpio_direction_input(stru
+@@ -106,6 +108,8 @@ static int ltq_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset);
return 0;
}
-@@ -117,6 +121,8 @@ static int ltq_gpio_direction_output(str
+@@ -117,6 +121,8 @@ static int ltq_gpio_direction_output(struct gpio_chip *chip,
ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset);
ltq_gpio_set(chip, offset, value);
return 0;
+--
+1.7.9.1
+
-From 9946990028431fc732d1244c6ccdfface1ee5640 Mon Sep 17 00:00:00 2001
+From 1b9ea6ce42ae06a5f746b6f1aaa039037b2d71a3 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Fri, 11 Nov 2011 22:02:27 +0100
-Subject: [PATCH 15/70] MIPS: lantiq: add default configs
+Subject: [PATCH 15/73] MIPS: lantiq: add default configs
This patch adds the default config for 3 Lantiq SoCs
create mode 100644 arch/mips/configs/falcon_defconfig
create mode 100644 arch/mips/configs/xway_defconfig
+diff --git a/arch/mips/configs/ase_defconfig b/arch/mips/configs/ase_defconfig
+new file mode 100644
+index 0000000..5bb1d93
--- /dev/null
+++ b/arch/mips/configs/ase_defconfig
@@ -0,0 +1,67 @@
+CONFIG_SQUASHFS_XZ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+diff --git a/arch/mips/configs/falcon_defconfig b/arch/mips/configs/falcon_defconfig
+new file mode 100644
+index 0000000..ce242a8
--- /dev/null
+++ b/arch/mips/configs/falcon_defconfig
@@ -0,0 +1,72 @@
+CONFIG_SQUASHFS_XZ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+diff --git a/arch/mips/configs/xway_defconfig b/arch/mips/configs/xway_defconfig
+new file mode 100644
+index 0000000..510a964
--- /dev/null
+++ b/arch/mips/configs/xway_defconfig
@@ -0,0 +1,66 @@
+CONFIG_SQUASHFS_XZ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+--
+1.7.9.1
+
-From c68f8bdcd4c58a0c1d92e20230a943e8089d865a Mon Sep 17 00:00:00 2001
+From ae4a7211739412c5f9ddd85d1437cab182fe428f Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 10 Nov 2011 19:32:37 +0100
-Subject: [PATCH 16/70] MAINTAINERS: add entry for Lantiq related files
+Subject: [PATCH 16/73] MAINTAINERS: add entry for Lantiq related files
Adds new entry to MAINTAINERS file for Lantiq SoC related code.
MAINTAINERS | 12 ++++++++++++
1 files changed, 12 insertions(+), 0 deletions(-)
+diff --git a/MAINTAINERS b/MAINTAINERS
+index 62f1cd3..c04defd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
-@@ -4353,6 +4353,18 @@ S: Supported
+@@ -4348,6 +4348,18 @@ S: Supported
F: Documentation/mips/
F: arch/mips/
MISCELLANEOUS MCA-SUPPORT
M: James Bottomley <James.Bottomley@HansenPartnership.com>
S: Maintained
+--
+1.7.9.1
+
--- /dev/null
+From 476a5cd7924926236c2356654da639fea90a8fea Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 24 Aug 2011 13:28:55 +0200
+Subject: [PATCH 17/73] MIPS: lantiq: enable oprofile support on lantiq
+ targets
+
+This patch sets the performance counters irq and HAVE_OPROFILE flag for Lantiq
+SoCs.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/Kconfig | 1 +
+ arch/mips/lantiq/irq.c | 5 +++++
+ 2 files changed, 6 insertions(+), 0 deletions(-)
+
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index d46f1da..c1ceadb 100644
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -226,6 +226,7 @@ config LANTIQ
+ select SWAP_IO_SPACE
+ select BOOT_RAW
+ select HAVE_CLK
++ select HAVE_OPROFILE
+ select MIPS_MACHINE
+
+ config LASAT
+diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
+index 17c057f..0b2ed87 100644
+--- a/arch/mips/lantiq/irq.c
++++ b/arch/mips/lantiq/irq.c
+@@ -40,6 +40,9 @@
+
+ #define MAX_EIU 6
+
++/* the performance counter */
++#define LTQ_PERF_IRQ (INT_NUM_IM4_IRL0 + 31)
++
+ /* irqs generated by device attached to the EBU need to be acked in
+ * a special manner
+ */
+@@ -318,6 +321,8 @@ void __init arch_init_irq(void)
+ set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ0 | IE_IRQ1 |
+ IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
+ #endif
++
++ cp0_perfcount_irq = LTQ_PERF_IRQ;
+ }
+
+ unsigned int __cpuinit get_c0_compare_int(void)
+--
+1.7.9.1
+
+++ /dev/null
-From e0bd3f1b16fbce1f0f7900a0dd624f9dc8a47f78 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 24 Aug 2011 13:28:55 +0200
-Subject: [PATCH 18/70] MIPS: lantiq: enable oprofile support on lantiq
- targets
-
-This patch sets the performance counters irq and HAVE_OPROFILE flag for Lantiq
-SoCs.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/Kconfig | 1 +
- arch/mips/lantiq/irq.c | 5 +++++
- 2 files changed, 6 insertions(+), 0 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -226,6 +226,7 @@ config LANTIQ
- select SWAP_IO_SPACE
- select BOOT_RAW
- select HAVE_CLK
-+ select HAVE_OPROFILE
- select MIPS_MACHINE
-
- config LASAT
---- a/arch/mips/lantiq/irq.c
-+++ b/arch/mips/lantiq/irq.c
-@@ -40,6 +40,9 @@
-
- #define MAX_EIU 6
-
-+/* the performance counter */
-+#define LTQ_PERF_IRQ (INT_NUM_IM4_IRL0 + 31)
-+
- /* irqs generated by device attached to the EBU need to be acked in
- * a special manner
- */
-@@ -318,6 +321,8 @@ void __init arch_init_irq(void)
- set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ0 | IE_IRQ1 |
- IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
- #endif
-+
-+ cp0_perfcount_irq = LTQ_PERF_IRQ;
- }
-
- unsigned int __cpuinit get_c0_compare_int(void)
--- /dev/null
+From a1a9dcf7554df9bbf23ca0933e645b2327abbb8b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 10 Aug 2011 15:32:16 +0200
+Subject: [PATCH 18/73] NET: MIPS: lantiq: make etop ethernet work on ase/ar9
+
+Extend the driver to handle the different DMA channel layout for AR9 and
+Amazon-SE SoCs. The patch also adds support for the integrated PHY found
+on Amazon-SE and the gigabit switch found inside the AR9.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: netdev@vger.kernel.org
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_irq.h | 22 +---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 10 ++
+ arch/mips/lantiq/xway/devices.c | 11 +-
+ drivers/net/ethernet/lantiq_etop.c | 171 ++++++++++++++++++--
+ 4 files changed, 174 insertions(+), 40 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
+index b4465a8..2a8d5ad 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
+@@ -38,26 +38,8 @@
+
+ #define MIPS_CPU_TIMER_IRQ 7
+
+-#define LTQ_DMA_CH0_INT (INT_NUM_IM2_IRL0)
+-#define LTQ_DMA_CH1_INT (INT_NUM_IM2_IRL0 + 1)
+-#define LTQ_DMA_CH2_INT (INT_NUM_IM2_IRL0 + 2)
+-#define LTQ_DMA_CH3_INT (INT_NUM_IM2_IRL0 + 3)
+-#define LTQ_DMA_CH4_INT (INT_NUM_IM2_IRL0 + 4)
+-#define LTQ_DMA_CH5_INT (INT_NUM_IM2_IRL0 + 5)
+-#define LTQ_DMA_CH6_INT (INT_NUM_IM2_IRL0 + 6)
+-#define LTQ_DMA_CH7_INT (INT_NUM_IM2_IRL0 + 7)
+-#define LTQ_DMA_CH8_INT (INT_NUM_IM2_IRL0 + 8)
+-#define LTQ_DMA_CH9_INT (INT_NUM_IM2_IRL0 + 9)
+-#define LTQ_DMA_CH10_INT (INT_NUM_IM2_IRL0 + 10)
+-#define LTQ_DMA_CH11_INT (INT_NUM_IM2_IRL0 + 11)
+-#define LTQ_DMA_CH12_INT (INT_NUM_IM2_IRL0 + 25)
+-#define LTQ_DMA_CH13_INT (INT_NUM_IM2_IRL0 + 26)
+-#define LTQ_DMA_CH14_INT (INT_NUM_IM2_IRL0 + 27)
+-#define LTQ_DMA_CH15_INT (INT_NUM_IM2_IRL0 + 28)
+-#define LTQ_DMA_CH16_INT (INT_NUM_IM2_IRL0 + 29)
+-#define LTQ_DMA_CH17_INT (INT_NUM_IM2_IRL0 + 30)
+-#define LTQ_DMA_CH18_INT (INT_NUM_IM2_IRL0 + 16)
+-#define LTQ_DMA_CH19_INT (INT_NUM_IM2_IRL0 + 21)
++#define LTQ_DMA_ETOP ((ltq_is_ase()) ? \
++ (INT_NUM_IM3_IRL0) : (INT_NUM_IM2_IRL0))
+
+ #define LTQ_PPE_MBOX_INT (INT_NUM_IM2_IRL0 + 24)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index e31f52d..6983d75 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -82,6 +82,7 @@
+ #define LTQ_PMU_SIZE 0x1000
+
+ #define PMU_DMA 0x0020
++#define PMU_EPHY 0x0080
+ #define PMU_USB 0x8041
+ #define PMU_LED 0x0800
+ #define PMU_GPT 0x1000
+@@ -93,6 +94,10 @@
+ #define LTQ_ETOP_BASE_ADDR 0x1E180000
+ #define LTQ_ETOP_SIZE 0x40000
+
++/* GBIT - gigabit switch */
++#define LTQ_GBIT_BASE_ADDR 0x1E108000
++#define LTQ_GBIT_SIZE 0x200
++
+ /* DMA */
+ #define LTQ_DMA_BASE_ADDR 0x1E104100
+ #define LTQ_DMA_SIZE 0x800
+@@ -147,6 +152,11 @@ extern void ltq_pmu_enable(unsigned int module);
+ extern void ltq_pmu_disable(unsigned int module);
+ extern void ltq_cgu_enable(unsigned int clk);
+
++static inline int ltq_is_ase(void)
++{
++ return (ltq_get_soc_type() == SOC_TYPE_AMAZON_SE);
++}
++
+ static inline int ltq_is_ar9(void)
+ {
+ return (ltq_get_soc_type() == SOC_TYPE_AR9);
+diff --git a/arch/mips/lantiq/xway/devices.c b/arch/mips/lantiq/xway/devices.c
+index f97e565..eab4644d 100644
+--- a/arch/mips/lantiq/xway/devices.c
++++ b/arch/mips/lantiq/xway/devices.c
+@@ -74,18 +74,23 @@ void __init ltq_register_ase_asc(void)
+ }
+
+ /* ethernet */
+-static struct resource ltq_etop_resources =
+- MEM_RES("etop", LTQ_ETOP_BASE_ADDR, LTQ_ETOP_SIZE);
++static struct resource ltq_etop_resources[] = {
++ MEM_RES("etop", LTQ_ETOP_BASE_ADDR, LTQ_ETOP_SIZE),
++ MEM_RES("gbit", LTQ_GBIT_BASE_ADDR, LTQ_GBIT_SIZE),
++};
+
+ static struct platform_device ltq_etop = {
+ .name = "ltq_etop",
+- .resource = <q_etop_resources,
++ .resource = ltq_etop_resources,
+ .num_resources = 1,
+ };
+
+ void __init
+ ltq_register_etop(struct ltq_eth_data *eth)
+ {
++ /* only register the gphy on socs that have one */
++ if (ltq_is_ar9() | ltq_is_vr9())
++ ltq_etop.num_resources = 2;
+ if (eth) {
+ ltq_etop.dev.platform_data = eth;
+ platform_device_register(<q_etop);
+diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
+index 0b3567a..d3d4931 100644
+--- a/drivers/net/ethernet/lantiq_etop.c
++++ b/drivers/net/ethernet/lantiq_etop.c
+@@ -71,10 +71,43 @@
+ #define ETOP_MII_REVERSE 0xe
+ #define ETOP_PLEN_UNDER 0x40
+ #define ETOP_CGEN 0x800
+-
+-/* use 2 static channels for TX/RX */
++#define ETOP_CFG_MII0 0x01
++
++#define LTQ_GBIT_MDIO_CTL 0xCC
++#define LTQ_GBIT_MDIO_DATA 0xd0
++#define LTQ_GBIT_GCTL0 0x68
++#define LTQ_GBIT_PMAC_HD_CTL 0x8c
++#define LTQ_GBIT_P0_CTL 0x4
++#define LTQ_GBIT_PMAC_RX_IPG 0xa8
++
++#define PMAC_HD_CTL_AS (1 << 19)
++#define PMAC_HD_CTL_RXSH (1 << 22)
++
++/* Switch Enable (0=disable, 1=enable) */
++#define GCTL0_SE 0x80000000
++/* Disable MDIO auto polling (0=disable, 1=enable) */
++#define PX_CTL_DMDIO 0x00400000
++
++/* register information for the gbit's MDIO bus */
++#define MDIO_XR9_REQUEST 0x00008000
++#define MDIO_XR9_READ 0x00000800
++#define MDIO_XR9_WRITE 0x00000400
++#define MDIO_XR9_REG_MASK 0x1f
++#define MDIO_XR9_ADDR_MASK 0x1f
++#define MDIO_XR9_RD_MASK 0xffff
++#define MDIO_XR9_REG_OFFSET 0
++#define MDIO_XR9_ADDR_OFFSET 5
++#define MDIO_XR9_WR_OFFSET 16
++
++/* the newer xway socks have a embedded 3/7 port gbit multiplexer */
++#define ltq_has_gbit() (ltq_is_ar9() || ltq_is_vr9())
++
++/* use 2 static channels for TX/RX
++ depending on the SoC we need to use different DMA channels for ethernet */
+ #define LTQ_ETOP_TX_CHANNEL 1
+-#define LTQ_ETOP_RX_CHANNEL 6
++#define LTQ_ETOP_RX_CHANNEL ((ltq_is_ase()) ? (5) : \
++ ((ltq_has_gbit()) ? (0) : (6)))
++
+ #define IS_TX(x) (x == LTQ_ETOP_TX_CHANNEL)
+ #define IS_RX(x) (x == LTQ_ETOP_RX_CHANNEL)
+
+@@ -83,9 +116,15 @@
+ #define ltq_etop_w32_mask(x, y, z) \
+ ltq_w32_mask(x, y, ltq_etop_membase + (z))
+
++#define ltq_gbit_r32(x) ltq_r32(ltq_gbit_membase + (x))
++#define ltq_gbit_w32(x, y) ltq_w32(x, ltq_gbit_membase + (y))
++#define ltq_gbit_w32_mask(x, y, z) \
++ ltq_w32_mask(x, y, ltq_gbit_membase + (z))
++
+ #define DRV_VERSION "1.0"
+
+ static void __iomem *ltq_etop_membase;
++static void __iomem *ltq_gbit_membase;
+
+ struct ltq_etop_chan {
+ int idx;
+@@ -110,6 +149,9 @@ struct ltq_etop_priv {
+ spinlock_t lock;
+ };
+
++static int ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr,
++ int phy_reg, u16 phy_data);
++
+ static int
+ ltq_etop_alloc_skb(struct ltq_etop_chan *ch)
+ {
+@@ -211,7 +253,7 @@ static irqreturn_t
+ ltq_etop_dma_irq(int irq, void *_priv)
+ {
+ struct ltq_etop_priv *priv = _priv;
+- int ch = irq - LTQ_DMA_CH0_INT;
++ int ch = irq - LTQ_DMA_ETOP;
+
+ napi_schedule(&priv->ch[ch].napi);
+ return IRQ_HANDLED;
+@@ -244,15 +286,43 @@ ltq_etop_hw_exit(struct net_device *dev)
+ ltq_etop_free_channel(dev, &priv->ch[i]);
+ }
+
++static void
++ltq_etop_gbit_init(void)
++{
++ ltq_pmu_enable(PMU_SWITCH);
++
++ ltq_gpio_request(42, 2, 1, "MDIO");
++ ltq_gpio_request(43, 2, 1, "MDC");
++
++ ltq_gbit_w32_mask(0, GCTL0_SE, LTQ_GBIT_GCTL0);
++ /** Disable MDIO auto polling mode */
++ ltq_gbit_w32_mask(0, PX_CTL_DMDIO, LTQ_GBIT_P0_CTL);
++ /* set 1522 packet size */
++ ltq_gbit_w32_mask(0x300, 0, LTQ_GBIT_GCTL0);
++ /* disable pmac & dmac headers */
++ ltq_gbit_w32_mask(PMAC_HD_CTL_AS | PMAC_HD_CTL_RXSH, 0,
++ LTQ_GBIT_PMAC_HD_CTL);
++ /* Due to traffic halt when burst length 8,
++ replace default IPG value with 0x3B */
++ ltq_gbit_w32(0x3B, LTQ_GBIT_PMAC_RX_IPG);
++}
++
+ static int
+ ltq_etop_hw_init(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
++ unsigned int mii_mode = priv->pldata->mii_mode;
+ int i;
+
+ ltq_pmu_enable(PMU_PPE);
+
+- switch (priv->pldata->mii_mode) {
++ if (ltq_has_gbit()) {
++ ltq_etop_gbit_init();
++ /* force the etops link to the gbit to MII */
++ mii_mode = PHY_INTERFACE_MODE_MII;
++ }
++
++ switch (mii_mode) {
+ case PHY_INTERFACE_MODE_RMII:
+ ltq_etop_w32_mask(ETOP_MII_MASK,
+ ETOP_MII_REVERSE, LTQ_ETOP_CFG);
+@@ -264,6 +334,18 @@ ltq_etop_hw_init(struct net_device *dev)
+ break;
+
+ default:
++ if (ltq_is_ase()) {
++ ltq_pmu_enable(PMU_EPHY);
++ /* disable external MII */
++ ltq_etop_w32_mask(0, ETOP_CFG_MII0, LTQ_ETOP_CFG);
++ /* enable clock for internal PHY */
++ ltq_cgu_enable(CGU_EPHY);
++ /* we need to write this magic to the internal phy to
++ make it work */
++ ltq_etop_mdio_wr(NULL, 0x8, 0x12, 0xC020);
++ pr_info("Selected EPHY mode\n");
++ break;
++ }
+ netdev_err(dev, "unknown mii mode %d\n",
+ priv->pldata->mii_mode);
+ return -ENOTSUPP;
+@@ -275,7 +357,7 @@ ltq_etop_hw_init(struct net_device *dev)
+ ltq_dma_init_port(DMA_PORT_ETOP);
+
+ for (i = 0; i < MAX_DMA_CHAN; i++) {
+- int irq = LTQ_DMA_CH0_INT + i;
++ int irq = LTQ_DMA_ETOP + i;
+ struct ltq_etop_chan *ch = &priv->ch[i];
+
+ ch->idx = ch->dma.nr = i;
+@@ -339,6 +421,39 @@ static const struct ethtool_ops ltq_etop_ethtool_ops = {
+ };
+
+ static int
++ltq_etop_mdio_wr_xr9(struct mii_bus *bus, int phy_addr,
++ int phy_reg, u16 phy_data)
++{
++ u32 val = MDIO_XR9_REQUEST | MDIO_XR9_WRITE |
++ (phy_data << MDIO_XR9_WR_OFFSET) |
++ ((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) |
++ ((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET);
++
++ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
++ ;
++ ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL);
++ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
++ ;
++ return 0;
++}
++
++static int
++ltq_etop_mdio_rd_xr9(struct mii_bus *bus, int phy_addr, int phy_reg)
++{
++ u32 val = MDIO_XR9_REQUEST | MDIO_XR9_READ |
++ ((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) |
++ ((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET);
++
++ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
++ ;
++ ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL);
++ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
++ ;
++ val = ltq_gbit_r32(LTQ_GBIT_MDIO_DATA) & MDIO_XR9_RD_MASK;
++ return val;
++}
++
++static int
+ ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data)
+ {
+ u32 val = MDIO_REQUEST |
+@@ -379,14 +494,11 @@ ltq_etop_mdio_probe(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ struct phy_device *phydev = NULL;
+- int phy_addr;
+
+- for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+- if (priv->mii_bus->phy_map[phy_addr]) {
+- phydev = priv->mii_bus->phy_map[phy_addr];
+- break;
+- }
+- }
++ if (ltq_is_ase())
++ phydev = priv->mii_bus->phy_map[8];
++ else
++ phydev = priv->mii_bus->phy_map[0];
+
+ if (!phydev) {
+ netdev_err(dev, "no PHY found\n");
+@@ -408,6 +520,9 @@ ltq_etop_mdio_probe(struct net_device *dev)
+ | SUPPORTED_Autoneg
+ | SUPPORTED_MII
+ | SUPPORTED_TP);
++ if (ltq_has_gbit())
++ phydev->supported &= SUPPORTED_1000baseT_Half
++ | SUPPORTED_1000baseT_Full;
+
+ phydev->advertising = phydev->supported;
+ priv->phydev = phydev;
+@@ -433,8 +548,13 @@ ltq_etop_mdio_init(struct net_device *dev)
+ }
+
+ priv->mii_bus->priv = dev;
+- priv->mii_bus->read = ltq_etop_mdio_rd;
+- priv->mii_bus->write = ltq_etop_mdio_wr;
++ if (ltq_has_gbit()) {
++ priv->mii_bus->read = ltq_etop_mdio_rd_xr9;
++ priv->mii_bus->write = ltq_etop_mdio_wr_xr9;
++ } else {
++ priv->mii_bus->read = ltq_etop_mdio_rd;
++ priv->mii_bus->write = ltq_etop_mdio_wr;
++ }
+ priv->mii_bus->name = "ltq_mii";
+ snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
+ priv->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+@@ -524,9 +644,9 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1];
+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+- int len;
+ unsigned long flags;
+ u32 byte_offset;
++ int len;
+
+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+
+@@ -700,7 +820,7 @@ ltq_etop_probe(struct platform_device *pdev)
+ {
+ struct net_device *dev;
+ struct ltq_etop_priv *priv;
+- struct resource *res;
++ struct resource *res, *gbit_res;
+ int err;
+ int i;
+
+@@ -728,6 +848,23 @@ ltq_etop_probe(struct platform_device *pdev)
+ goto err_out;
+ }
+
++ if (ltq_has_gbit()) {
++ gbit_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++ if (!gbit_res) {
++ dev_err(&pdev->dev, "failed to get gbit resource\n");
++ err = -ENOENT;
++ goto err_out;
++ }
++ ltq_gbit_membase = devm_ioremap_nocache(&pdev->dev,
++ gbit_res->start, resource_size(gbit_res));
++ if (!ltq_gbit_membase) {
++ dev_err(&pdev->dev, "failed to remap gigabit switch %d\n",
++ pdev->id);
++ err = -ENOMEM;
++ goto err_out;
++ }
++ }
++
+ dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
+ strcpy(dev->name, "eth%d");
+ dev->netdev_ops = <q_eth_netdev_ops;
+--
+1.7.9.1
+
+++ /dev/null
-From 4b24c79196e5777baff0f5d53b62cf2a964e26ff Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 10 Aug 2011 15:32:16 +0200
-Subject: [PATCH 19/70] NET: MIPS: lantiq: make etop ethernet work on ase/ar9
-
-Extend the driver to handle the different DMA channel layout for AR9 and
-Amazon-SE SoCs. The patch also adds support for the integrated PHY found
-on Amazon-SE and the gigabit switch found inside the AR9.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: netdev@vger.kernel.org
----
- .../mips/include/asm/mach-lantiq/xway/lantiq_irq.h | 22 +---
- .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 10 ++
- arch/mips/lantiq/xway/devices.c | 11 +-
- drivers/net/ethernet/lantiq_etop.c | 171 ++++++++++++++++++--
- 4 files changed, 174 insertions(+), 40 deletions(-)
-
---- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
-+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
-@@ -38,26 +38,8 @@
-
- #define MIPS_CPU_TIMER_IRQ 7
-
--#define LTQ_DMA_CH0_INT (INT_NUM_IM2_IRL0)
--#define LTQ_DMA_CH1_INT (INT_NUM_IM2_IRL0 + 1)
--#define LTQ_DMA_CH2_INT (INT_NUM_IM2_IRL0 + 2)
--#define LTQ_DMA_CH3_INT (INT_NUM_IM2_IRL0 + 3)
--#define LTQ_DMA_CH4_INT (INT_NUM_IM2_IRL0 + 4)
--#define LTQ_DMA_CH5_INT (INT_NUM_IM2_IRL0 + 5)
--#define LTQ_DMA_CH6_INT (INT_NUM_IM2_IRL0 + 6)
--#define LTQ_DMA_CH7_INT (INT_NUM_IM2_IRL0 + 7)
--#define LTQ_DMA_CH8_INT (INT_NUM_IM2_IRL0 + 8)
--#define LTQ_DMA_CH9_INT (INT_NUM_IM2_IRL0 + 9)
--#define LTQ_DMA_CH10_INT (INT_NUM_IM2_IRL0 + 10)
--#define LTQ_DMA_CH11_INT (INT_NUM_IM2_IRL0 + 11)
--#define LTQ_DMA_CH12_INT (INT_NUM_IM2_IRL0 + 25)
--#define LTQ_DMA_CH13_INT (INT_NUM_IM2_IRL0 + 26)
--#define LTQ_DMA_CH14_INT (INT_NUM_IM2_IRL0 + 27)
--#define LTQ_DMA_CH15_INT (INT_NUM_IM2_IRL0 + 28)
--#define LTQ_DMA_CH16_INT (INT_NUM_IM2_IRL0 + 29)
--#define LTQ_DMA_CH17_INT (INT_NUM_IM2_IRL0 + 30)
--#define LTQ_DMA_CH18_INT (INT_NUM_IM2_IRL0 + 16)
--#define LTQ_DMA_CH19_INT (INT_NUM_IM2_IRL0 + 21)
-+#define LTQ_DMA_ETOP ((ltq_is_ase()) ? \
-+ (INT_NUM_IM3_IRL0) : (INT_NUM_IM2_IRL0))
-
- #define LTQ_PPE_MBOX_INT (INT_NUM_IM2_IRL0 + 24)
-
---- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-@@ -82,6 +82,7 @@
- #define LTQ_PMU_SIZE 0x1000
-
- #define PMU_DMA 0x0020
-+#define PMU_EPHY 0x0080
- #define PMU_USB 0x8041
- #define PMU_LED 0x0800
- #define PMU_GPT 0x1000
-@@ -93,6 +94,10 @@
- #define LTQ_ETOP_BASE_ADDR 0x1E180000
- #define LTQ_ETOP_SIZE 0x40000
-
-+/* GBIT - gigabit switch */
-+#define LTQ_GBIT_BASE_ADDR 0x1E108000
-+#define LTQ_GBIT_SIZE 0x200
-+
- /* DMA */
- #define LTQ_DMA_BASE_ADDR 0x1E104100
- #define LTQ_DMA_SIZE 0x800
-@@ -147,6 +152,11 @@ extern void ltq_pmu_enable(unsigned int
- extern void ltq_pmu_disable(unsigned int module);
- extern void ltq_cgu_enable(unsigned int clk);
-
-+static inline int ltq_is_ase(void)
-+{
-+ return (ltq_get_soc_type() == SOC_TYPE_AMAZON_SE);
-+}
-+
- static inline int ltq_is_ar9(void)
- {
- return (ltq_get_soc_type() == SOC_TYPE_AR9);
---- a/arch/mips/lantiq/xway/devices.c
-+++ b/arch/mips/lantiq/xway/devices.c
-@@ -74,18 +74,23 @@ void __init ltq_register_ase_asc(void)
- }
-
- /* ethernet */
--static struct resource ltq_etop_resources =
-- MEM_RES("etop", LTQ_ETOP_BASE_ADDR, LTQ_ETOP_SIZE);
-+static struct resource ltq_etop_resources[] = {
-+ MEM_RES("etop", LTQ_ETOP_BASE_ADDR, LTQ_ETOP_SIZE),
-+ MEM_RES("gbit", LTQ_GBIT_BASE_ADDR, LTQ_GBIT_SIZE),
-+};
-
- static struct platform_device ltq_etop = {
- .name = "ltq_etop",
-- .resource = <q_etop_resources,
-+ .resource = ltq_etop_resources,
- .num_resources = 1,
- };
-
- void __init
- ltq_register_etop(struct ltq_eth_data *eth)
- {
-+ /* only register the gphy on socs that have one */
-+ if (ltq_is_ar9() | ltq_is_vr9())
-+ ltq_etop.num_resources = 2;
- if (eth) {
- ltq_etop.dev.platform_data = eth;
- platform_device_register(<q_etop);
---- a/drivers/net/ethernet/lantiq_etop.c
-+++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -71,10 +71,43 @@
- #define ETOP_MII_REVERSE 0xe
- #define ETOP_PLEN_UNDER 0x40
- #define ETOP_CGEN 0x800
-+#define ETOP_CFG_MII0 0x01
-
--/* use 2 static channels for TX/RX */
-+#define LTQ_GBIT_MDIO_CTL 0xCC
-+#define LTQ_GBIT_MDIO_DATA 0xd0
-+#define LTQ_GBIT_GCTL0 0x68
-+#define LTQ_GBIT_PMAC_HD_CTL 0x8c
-+#define LTQ_GBIT_P0_CTL 0x4
-+#define LTQ_GBIT_PMAC_RX_IPG 0xa8
-+
-+#define PMAC_HD_CTL_AS (1 << 19)
-+#define PMAC_HD_CTL_RXSH (1 << 22)
-+
-+/* Switch Enable (0=disable, 1=enable) */
-+#define GCTL0_SE 0x80000000
-+/* Disable MDIO auto polling (0=disable, 1=enable) */
-+#define PX_CTL_DMDIO 0x00400000
-+
-+/* register information for the gbit's MDIO bus */
-+#define MDIO_XR9_REQUEST 0x00008000
-+#define MDIO_XR9_READ 0x00000800
-+#define MDIO_XR9_WRITE 0x00000400
-+#define MDIO_XR9_REG_MASK 0x1f
-+#define MDIO_XR9_ADDR_MASK 0x1f
-+#define MDIO_XR9_RD_MASK 0xffff
-+#define MDIO_XR9_REG_OFFSET 0
-+#define MDIO_XR9_ADDR_OFFSET 5
-+#define MDIO_XR9_WR_OFFSET 16
-+
-+/* the newer xway socks have a embedded 3/7 port gbit multiplexer */
-+#define ltq_has_gbit() (ltq_is_ar9() || ltq_is_vr9())
-+
-+/* use 2 static channels for TX/RX
-+ depending on the SoC we need to use different DMA channels for ethernet */
- #define LTQ_ETOP_TX_CHANNEL 1
--#define LTQ_ETOP_RX_CHANNEL 6
-+#define LTQ_ETOP_RX_CHANNEL ((ltq_is_ase()) ? (5) : \
-+ ((ltq_has_gbit()) ? (0) : (6)))
-+
- #define IS_TX(x) (x == LTQ_ETOP_TX_CHANNEL)
- #define IS_RX(x) (x == LTQ_ETOP_RX_CHANNEL)
-
-@@ -83,9 +116,15 @@
- #define ltq_etop_w32_mask(x, y, z) \
- ltq_w32_mask(x, y, ltq_etop_membase + (z))
-
-+#define ltq_gbit_r32(x) ltq_r32(ltq_gbit_membase + (x))
-+#define ltq_gbit_w32(x, y) ltq_w32(x, ltq_gbit_membase + (y))
-+#define ltq_gbit_w32_mask(x, y, z) \
-+ ltq_w32_mask(x, y, ltq_gbit_membase + (z))
-+
- #define DRV_VERSION "1.0"
-
- static void __iomem *ltq_etop_membase;
-+static void __iomem *ltq_gbit_membase;
-
- struct ltq_etop_chan {
- int idx;
-@@ -110,6 +149,9 @@ struct ltq_etop_priv {
- spinlock_t lock;
- };
-
-+static int ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr,
-+ int phy_reg, u16 phy_data);
-+
- static int
- ltq_etop_alloc_skb(struct ltq_etop_chan *ch)
- {
-@@ -211,7 +253,7 @@ static irqreturn_t
- ltq_etop_dma_irq(int irq, void *_priv)
- {
- struct ltq_etop_priv *priv = _priv;
-- int ch = irq - LTQ_DMA_CH0_INT;
-+ int ch = irq - LTQ_DMA_ETOP;
-
- napi_schedule(&priv->ch[ch].napi);
- return IRQ_HANDLED;
-@@ -244,15 +286,43 @@ ltq_etop_hw_exit(struct net_device *dev)
- ltq_etop_free_channel(dev, &priv->ch[i]);
- }
-
-+static void
-+ltq_etop_gbit_init(void)
-+{
-+ ltq_pmu_enable(PMU_SWITCH);
-+
-+ ltq_gpio_request(42, 2, 1, "MDIO");
-+ ltq_gpio_request(43, 2, 1, "MDC");
-+
-+ ltq_gbit_w32_mask(0, GCTL0_SE, LTQ_GBIT_GCTL0);
-+ /** Disable MDIO auto polling mode */
-+ ltq_gbit_w32_mask(0, PX_CTL_DMDIO, LTQ_GBIT_P0_CTL);
-+ /* set 1522 packet size */
-+ ltq_gbit_w32_mask(0x300, 0, LTQ_GBIT_GCTL0);
-+ /* disable pmac & dmac headers */
-+ ltq_gbit_w32_mask(PMAC_HD_CTL_AS | PMAC_HD_CTL_RXSH, 0,
-+ LTQ_GBIT_PMAC_HD_CTL);
-+ /* Due to traffic halt when burst length 8,
-+ replace default IPG value with 0x3B */
-+ ltq_gbit_w32(0x3B, LTQ_GBIT_PMAC_RX_IPG);
-+}
-+
- static int
- ltq_etop_hw_init(struct net_device *dev)
- {
- struct ltq_etop_priv *priv = netdev_priv(dev);
-+ unsigned int mii_mode = priv->pldata->mii_mode;
- int i;
-
- ltq_pmu_enable(PMU_PPE);
-
-- switch (priv->pldata->mii_mode) {
-+ if (ltq_has_gbit()) {
-+ ltq_etop_gbit_init();
-+ /* force the etops link to the gbit to MII */
-+ mii_mode = PHY_INTERFACE_MODE_MII;
-+ }
-+
-+ switch (mii_mode) {
- case PHY_INTERFACE_MODE_RMII:
- ltq_etop_w32_mask(ETOP_MII_MASK,
- ETOP_MII_REVERSE, LTQ_ETOP_CFG);
-@@ -264,6 +334,18 @@ ltq_etop_hw_init(struct net_device *dev)
- break;
-
- default:
-+ if (ltq_is_ase()) {
-+ ltq_pmu_enable(PMU_EPHY);
-+ /* disable external MII */
-+ ltq_etop_w32_mask(0, ETOP_CFG_MII0, LTQ_ETOP_CFG);
-+ /* enable clock for internal PHY */
-+ ltq_cgu_enable(CGU_EPHY);
-+ /* we need to write this magic to the internal phy to
-+ make it work */
-+ ltq_etop_mdio_wr(NULL, 0x8, 0x12, 0xC020);
-+ pr_info("Selected EPHY mode\n");
-+ break;
-+ }
- netdev_err(dev, "unknown mii mode %d\n",
- priv->pldata->mii_mode);
- return -ENOTSUPP;
-@@ -275,7 +357,7 @@ ltq_etop_hw_init(struct net_device *dev)
- ltq_dma_init_port(DMA_PORT_ETOP);
-
- for (i = 0; i < MAX_DMA_CHAN; i++) {
-- int irq = LTQ_DMA_CH0_INT + i;
-+ int irq = LTQ_DMA_ETOP + i;
- struct ltq_etop_chan *ch = &priv->ch[i];
-
- ch->idx = ch->dma.nr = i;
-@@ -339,6 +421,39 @@ static const struct ethtool_ops ltq_etop
- };
-
- static int
-+ltq_etop_mdio_wr_xr9(struct mii_bus *bus, int phy_addr,
-+ int phy_reg, u16 phy_data)
-+{
-+ u32 val = MDIO_XR9_REQUEST | MDIO_XR9_WRITE |
-+ (phy_data << MDIO_XR9_WR_OFFSET) |
-+ ((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) |
-+ ((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET);
-+
-+ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
-+ ;
-+ ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL);
-+ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
-+ ;
-+ return 0;
-+}
-+
-+static int
-+ltq_etop_mdio_rd_xr9(struct mii_bus *bus, int phy_addr, int phy_reg)
-+{
-+ u32 val = MDIO_XR9_REQUEST | MDIO_XR9_READ |
-+ ((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) |
-+ ((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET);
-+
-+ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
-+ ;
-+ ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL);
-+ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST)
-+ ;
-+ val = ltq_gbit_r32(LTQ_GBIT_MDIO_DATA) & MDIO_XR9_RD_MASK;
-+ return val;
-+}
-+
-+static int
- ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data)
- {
- u32 val = MDIO_REQUEST |
-@@ -379,14 +494,11 @@ ltq_etop_mdio_probe(struct net_device *d
- {
- struct ltq_etop_priv *priv = netdev_priv(dev);
- struct phy_device *phydev = NULL;
-- int phy_addr;
-
-- for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
-- if (priv->mii_bus->phy_map[phy_addr]) {
-- phydev = priv->mii_bus->phy_map[phy_addr];
-- break;
-- }
-- }
-+ if (ltq_is_ase())
-+ phydev = priv->mii_bus->phy_map[8];
-+ else
-+ phydev = priv->mii_bus->phy_map[0];
-
- if (!phydev) {
- netdev_err(dev, "no PHY found\n");
-@@ -408,6 +520,9 @@ ltq_etop_mdio_probe(struct net_device *d
- | SUPPORTED_Autoneg
- | SUPPORTED_MII
- | SUPPORTED_TP);
-+ if (ltq_has_gbit())
-+ phydev->supported &= SUPPORTED_1000baseT_Half
-+ | SUPPORTED_1000baseT_Full;
-
- phydev->advertising = phydev->supported;
- priv->phydev = phydev;
-@@ -433,8 +548,13 @@ ltq_etop_mdio_init(struct net_device *de
- }
-
- priv->mii_bus->priv = dev;
-- priv->mii_bus->read = ltq_etop_mdio_rd;
-- priv->mii_bus->write = ltq_etop_mdio_wr;
-+ if (ltq_has_gbit()) {
-+ priv->mii_bus->read = ltq_etop_mdio_rd_xr9;
-+ priv->mii_bus->write = ltq_etop_mdio_wr_xr9;
-+ } else {
-+ priv->mii_bus->read = ltq_etop_mdio_rd;
-+ priv->mii_bus->write = ltq_etop_mdio_wr;
-+ }
- priv->mii_bus->name = "ltq_mii";
- snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
- priv->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
-@@ -524,9 +644,9 @@ ltq_etop_tx(struct sk_buff *skb, struct
- struct ltq_etop_priv *priv = netdev_priv(dev);
- struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1];
- struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-- int len;
- unsigned long flags;
- u32 byte_offset;
-+ int len;
-
- len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
-
-@@ -700,7 +820,7 @@ ltq_etop_probe(struct platform_device *p
- {
- struct net_device *dev;
- struct ltq_etop_priv *priv;
-- struct resource *res;
-+ struct resource *res, *gbit_res;
- int err;
- int i;
-
-@@ -728,6 +848,23 @@ ltq_etop_probe(struct platform_device *p
- goto err_out;
- }
-
-+ if (ltq_has_gbit()) {
-+ gbit_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+ if (!gbit_res) {
-+ dev_err(&pdev->dev, "failed to get gbit resource\n");
-+ err = -ENOENT;
-+ goto err_out;
-+ }
-+ ltq_gbit_membase = devm_ioremap_nocache(&pdev->dev,
-+ gbit_res->start, resource_size(gbit_res));
-+ if (!ltq_gbit_membase) {
-+ dev_err(&pdev->dev, "failed to remap gigabit switch %d\n",
-+ pdev->id);
-+ err = -ENOMEM;
-+ goto err_out;
-+ }
-+ }
-+
- dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
- strcpy(dev->name, "eth%d");
- dev->netdev_ops = <q_eth_netdev_ops;
--- /dev/null
+From 2bad6512b242b3b5f41414a830d7224d504d0825 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 15 Nov 2011 14:52:21 +0100
+Subject: [PATCH 19/73] NET: MIPS: lantiq: non existing phy was not handled
+ gracefully
+
+The code blindly assumed that that a PHY device was present causing a BadVA.
+In addition the driver should not fail to load incase no PHY was found.
+Instead we print the following line and continue with no attached PHY.
+
+ etop: mdio probe failed
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: netdev@vger.kernel.org
+---
+ drivers/net/ethernet/lantiq_etop.c | 14 ++++++++------
+ 1 files changed, 8 insertions(+), 6 deletions(-)
+
+diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
+index d3d4931..9fd6779 100644
+--- a/drivers/net/ethernet/lantiq_etop.c
++++ b/drivers/net/ethernet/lantiq_etop.c
+@@ -612,7 +612,8 @@ ltq_etop_open(struct net_device *dev)
+ ltq_dma_open(&ch->dma);
+ napi_enable(&ch->napi);
+ }
+- phy_start(priv->phydev);
++ if (priv->phydev)
++ phy_start(priv->phydev);
+ netif_tx_start_all_queues(dev);
+ return 0;
+ }
+@@ -624,7 +625,8 @@ ltq_etop_stop(struct net_device *dev)
+ int i;
+
+ netif_tx_stop_all_queues(dev);
+- phy_stop(priv->phydev);
++ if (priv->phydev)
++ phy_stop(priv->phydev);
+ for (i = 0; i < MAX_DMA_CHAN; i++) {
+ struct ltq_etop_chan *ch = &priv->ch[i];
+
+@@ -770,9 +772,10 @@ ltq_etop_init(struct net_device *dev)
+ if (err)
+ goto err_netdev;
+ ltq_etop_set_multicast_list(dev);
+- err = ltq_etop_mdio_init(dev);
+- if (err)
+- goto err_netdev;
++ if (!ltq_etop_mdio_init(dev))
++ dev->ethtool_ops = <q_etop_ethtool_ops;
++ else
++ pr_warn("etop: mdio probe failed\n");;
+ return 0;
+
+ err_netdev:
+@@ -868,7 +871,6 @@ ltq_etop_probe(struct platform_device *pdev)
+ dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
+ strcpy(dev->name, "eth%d");
+ dev->netdev_ops = <q_eth_netdev_ops;
+- dev->ethtool_ops = <q_etop_ethtool_ops;
+ priv = netdev_priv(dev);
+ priv->res = res;
+ priv->pldata = dev_get_platdata(&pdev->dev);
+--
+1.7.9.1
+
+++ /dev/null
-From d9cddd0b4062e66f350297b4b855ef4db3a1c16b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 15 Nov 2011 14:52:21 +0100
-Subject: [PATCH 20/70] NET: MIPS: lantiq: non existing phy was not handled
- gracefully
-
-The code blindly assumed that that a PHY device was present causing a BadVA.
-In addition the driver should not fail to load incase no PHY was found.
-Instead we print the following line and continue with no attached PHY.
-
- etop: mdio probe failed
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: netdev@vger.kernel.org
----
- drivers/net/ethernet/lantiq_etop.c | 14 ++++++++------
- 1 files changed, 8 insertions(+), 6 deletions(-)
-
---- a/drivers/net/ethernet/lantiq_etop.c
-+++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -612,7 +612,8 @@ ltq_etop_open(struct net_device *dev)
- ltq_dma_open(&ch->dma);
- napi_enable(&ch->napi);
- }
-- phy_start(priv->phydev);
-+ if (priv->phydev)
-+ phy_start(priv->phydev);
- netif_tx_start_all_queues(dev);
- return 0;
- }
-@@ -624,7 +625,8 @@ ltq_etop_stop(struct net_device *dev)
- int i;
-
- netif_tx_stop_all_queues(dev);
-- phy_stop(priv->phydev);
-+ if (priv->phydev)
-+ phy_stop(priv->phydev);
- for (i = 0; i < MAX_DMA_CHAN; i++) {
- struct ltq_etop_chan *ch = &priv->ch[i];
-
-@@ -770,9 +772,10 @@ ltq_etop_init(struct net_device *dev)
- if (err)
- goto err_netdev;
- ltq_etop_set_multicast_list(dev);
-- err = ltq_etop_mdio_init(dev);
-- if (err)
-- goto err_netdev;
-+ if (!ltq_etop_mdio_init(dev))
-+ dev->ethtool_ops = <q_etop_ethtool_ops;
-+ else
-+ pr_warn("etop: mdio probe failed\n");;
- return 0;
-
- err_netdev:
-@@ -868,7 +871,6 @@ ltq_etop_probe(struct platform_device *p
- dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
- strcpy(dev->name, "eth%d");
- dev->netdev_ops = <q_eth_netdev_ops;
-- dev->ethtool_ops = <q_etop_ethtool_ops;
- priv = netdev_priv(dev);
- priv->res = res;
- priv->pldata = dev_get_platdata(&pdev->dev);
--- /dev/null
+From 641dd8688489331068ff4a3f35ee0ad3ca02dbd2 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 15 Nov 2011 15:56:06 +0100
+Subject: [PATCH 20/73] NET: MIPS: lantiq: return value of request_irq was not
+ handled gracefully
+
+The return values of request_irq() were not checked leading to the following
+error message.
+
+drivers/net/ethernet/lantiq_etop.c: In function 'ltq_etop_hw_init':
+drivers/net/ethernet/lantiq_etop.c:368:15: warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result
+drivers/net/ethernet/lantiq_etop.c:377:15: warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: netdev@vger.kernel.org
+---
+ drivers/net/ethernet/lantiq_etop.c | 14 ++++++++------
+ 1 files changed, 8 insertions(+), 6 deletions(-)
+
+diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
+index 9fd6779..dddb9fe 100644
+--- a/drivers/net/ethernet/lantiq_etop.c
++++ b/drivers/net/ethernet/lantiq_etop.c
+@@ -312,6 +312,7 @@ ltq_etop_hw_init(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ unsigned int mii_mode = priv->pldata->mii_mode;
++ int err = 0;
+ int i;
+
+ ltq_pmu_enable(PMU_PPE);
+@@ -356,7 +357,7 @@ ltq_etop_hw_init(struct net_device *dev)
+
+ ltq_dma_init_port(DMA_PORT_ETOP);
+
+- for (i = 0; i < MAX_DMA_CHAN; i++) {
++ for (i = 0; i < MAX_DMA_CHAN && !err; i++) {
+ int irq = LTQ_DMA_ETOP + i;
+ struct ltq_etop_chan *ch = &priv->ch[i];
+
+@@ -364,21 +365,22 @@ ltq_etop_hw_init(struct net_device *dev)
+
+ if (IS_TX(i)) {
+ ltq_dma_alloc_tx(&ch->dma);
+- request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
++ err = request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
+ "etop_tx", priv);
+ } else if (IS_RX(i)) {
+ ltq_dma_alloc_rx(&ch->dma);
+ for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
+ ch->dma.desc++)
+ if (ltq_etop_alloc_skb(ch))
+- return -ENOMEM;
++ err = -ENOMEM;
+ ch->dma.desc = 0;
+- request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
++ err = request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
+ "etop_rx", priv);
+ }
+- ch->dma.irq = irq;
++ if (!err)
++ ch->dma.irq = irq;
+ }
+- return 0;
++ return err;
+ }
+
+ static void
+--
+1.7.9.1
+
--- /dev/null
+From 20ed991ce59030544426dc3422da7ee76667537b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 08:37:25 +0100
+Subject: [PATCH 21/73] MIPS: lantiq: use devres managed gpios
+
+3.2 introduced devm_request_gpio() to allow managed gpios.
+
+The devres api requires a struct device pointer to work. Add a parameter to ltq_gpio_request()
+so that managed gpios can work.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ .../include/asm/mach-lantiq/falcon/lantiq_soc.h | 4 +---
+ arch/mips/include/asm/mach-lantiq/lantiq.h | 4 ++++
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 3 ---
+ arch/mips/lantiq/falcon/gpio.c | 4 ++--
+ arch/mips/lantiq/falcon/prom.c | 7 -------
+ arch/mips/lantiq/xway/gpio.c | 4 ++--
+ arch/mips/lantiq/xway/gpio_stp.c | 13 ++++++++-----
+ arch/mips/pci/pci-lantiq.c | 18 ++++++++++--------
+ drivers/net/ethernet/lantiq_etop.c | 9 ++++++---
+ drivers/tty/serial/lantiq.c | 12 ++++++++++++
+ 10 files changed, 45 insertions(+), 33 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+index b074748..a5dc06a 100644
+--- a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+@@ -126,9 +126,7 @@ extern __iomem void *ltq_sys1_membase;
+ #define ltq_sys1_w32_mask(clear, set, reg) \
+ ltq_sys1_w32((ltq_sys1_r32(reg) & ~(clear)) | (set), reg)
+
+-/* gpio_request wrapper to help configure the pin */
+-extern int ltq_gpio_request(unsigned int pin, unsigned int mux,
+- unsigned int dir, const char *name);
++/* gpio wrapper to help configure the pin muxing */
+ extern int ltq_gpio_mux_set(unsigned int pin, unsigned int mux);
+
+ /* to keep the irq code generic we need to define these to 0 as falcon
+diff --git a/arch/mips/include/asm/mach-lantiq/lantiq.h b/arch/mips/include/asm/mach-lantiq/lantiq.h
+index 188de0f..924b91a 100644
+--- a/arch/mips/include/asm/mach-lantiq/lantiq.h
++++ b/arch/mips/include/asm/mach-lantiq/lantiq.h
+@@ -37,6 +37,10 @@ extern unsigned int ltq_get_soc_type(void);
+ /* spinlock all ebu i/o */
+ extern spinlock_t ebu_lock;
+
++/* request a non-gpio and set the PIO config */
++extern int ltq_gpio_request(struct device *dev, unsigned int pin,
++ unsigned int mux, unsigned int dir, const char *name);
++
+ /* some irq helpers */
+ extern void ltq_disable_irq(struct irq_data *data);
+ extern void ltq_mask_and_ack_irq(struct irq_data *data);
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index 6983d75..6c5b705 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -145,9 +145,6 @@
+ extern __iomem void *ltq_ebu_membase;
+ extern __iomem void *ltq_cgu_membase;
+
+-/* request a non-gpio and set the PIO config */
+-extern int ltq_gpio_request(unsigned int pin, unsigned int mux,
+- unsigned int dir, const char *name);
+ extern void ltq_pmu_enable(unsigned int module);
+ extern void ltq_pmu_disable(unsigned int module);
+ extern void ltq_cgu_enable(unsigned int clk);
+diff --git a/arch/mips/lantiq/falcon/gpio.c b/arch/mips/lantiq/falcon/gpio.c
+index 28f8639..a44f71b 100644
+--- a/arch/mips/lantiq/falcon/gpio.c
++++ b/arch/mips/lantiq/falcon/gpio.c
+@@ -97,7 +97,7 @@ int ltq_gpio_mux_set(unsigned int pin, unsigned int mux)
+ }
+ EXPORT_SYMBOL(ltq_gpio_mux_set);
+
+-int ltq_gpio_request(unsigned int pin, unsigned int mux,
++int ltq_gpio_request(struct device *dev, unsigned int pin, unsigned int mux,
+ unsigned int dir, const char *name)
+ {
+ int port = pin / 100;
+@@ -106,7 +106,7 @@ int ltq_gpio_request(unsigned int pin, unsigned int mux,
+ if (offset >= PINS_PER_PORT || port >= MAX_PORTS)
+ return -EINVAL;
+
+- if (gpio_request(pin, name)) {
++ if (devm_gpio_request(dev, pin, name)) {
+ pr_err("failed to setup lantiq gpio: %s\n", name);
+ return -EBUSY;
+ }
+diff --git a/arch/mips/lantiq/falcon/prom.c b/arch/mips/lantiq/falcon/prom.c
+index b50d6f9..f98b389 100644
+--- a/arch/mips/lantiq/falcon/prom.c
++++ b/arch/mips/lantiq/falcon/prom.c
+@@ -27,9 +27,6 @@
+ #define TYPE_SHIFT 26
+ #define TYPE_MASK 0x3C000000
+
+-#define MUXC_SIF_RX_PIN 112
+-#define MUXC_SIF_TX_PIN 113
+-
+ /* this parameter allows us enable/disable asc1 via commandline */
+ static int register_asc1;
+ static int __init
+@@ -48,10 +45,6 @@ ltq_soc_setup(void)
+ falcon_register_gpio();
+ if (register_asc1) {
+ ltq_register_asc(1);
+- if (ltq_gpio_request(MUXC_SIF_RX_PIN, 3, 0, "asc1-rx"))
+- pr_err("failed to request asc1-rx");
+- if (ltq_gpio_request(MUXC_SIF_TX_PIN, 3, 1, "asc1-tx"))
+- pr_err("failed to request asc1-tx");
+ ltq_sysctl_activate(SYSCTL_SYS1, ACTS_ASC1_ACT);
+ }
+ }
+diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c
+index 14ff7c7..54ec6c9 100644
+--- a/arch/mips/lantiq/xway/gpio.c
++++ b/arch/mips/lantiq/xway/gpio.c
+@@ -50,14 +50,14 @@ int irq_to_gpio(unsigned int gpio)
+ }
+ EXPORT_SYMBOL(irq_to_gpio);
+
+-int ltq_gpio_request(unsigned int pin, unsigned int mux,
++int ltq_gpio_request(struct device *dev, unsigned int pin, unsigned int mux,
+ unsigned int dir, const char *name)
+ {
+ int id = 0;
+
+ if (pin >= (MAX_PORTS * PINS_PER_PORT))
+ return -EINVAL;
+- if (gpio_request(pin, name)) {
++ if (devm_gpio_request(dev, pin, name)) {
+ pr_err("failed to setup lantiq gpio: %s\n", name);
+ return -EBUSY;
+ }
+diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
+index cb6f170..e6b4809 100644
+--- a/arch/mips/lantiq/xway/gpio_stp.c
++++ b/arch/mips/lantiq/xway/gpio_stp.c
+@@ -80,11 +80,6 @@ static struct gpio_chip ltq_stp_chip = {
+
+ static int ltq_stp_hw_init(void)
+ {
+- /* the 3 pins used to control the external stp */
+- ltq_gpio_request(4, 2, 1, "stp-st");
+- ltq_gpio_request(5, 2, 1, "stp-d");
+- ltq_gpio_request(6, 2, 1, "stp-sh");
+-
+ /* sane defaults */
+ ltq_stp_w32(0, LTQ_STP_AR);
+ ltq_stp_w32(0, LTQ_STP_CPU0);
+@@ -133,6 +128,14 @@ static int __devinit ltq_stp_probe(struct platform_device *pdev)
+ dev_err(&pdev->dev, "failed to remap STP memory\n");
+ return -ENOMEM;
+ }
++
++ /* the 3 pins used to control the external stp */
++ if (ltq_gpio_request(&pdev->dev, 4, 2, 1, "stp-st") ||
++ ltq_gpio_request(&pdev->dev, 5, 2, 1, "stp-d") ||
++ ltq_gpio_request(&pdev->dev, 6, 2, 1, "stp-sh")) {
++ dev_err(&pdev->dev, "failed to request needed gpios\n");
++ return -EBUSY;
++ }
+ ret = gpiochip_add(<q_stp_chip);
+ if (!ret)
+ ret = ltq_stp_hw_init();
+diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
+index c001c5a..47b551c 100644
+--- a/arch/mips/pci/pci-lantiq.c
++++ b/arch/mips/pci/pci-lantiq.c
+@@ -150,24 +150,26 @@ static u32 ltq_calc_bar11mask(void)
+ return bar11mask;
+ }
+
+-static void ltq_pci_setup_gpio(int gpio)
++static void ltq_pci_setup_gpio(struct device *dev)
+ {
++ struct ltq_pci_data *conf = (struct ltq_pci_data *) dev->platform_data;
+ int i;
+ for (i = 0; i < ARRAY_SIZE(ltq_pci_gpio_map); i++) {
+- if (gpio & (1 << i)) {
+- ltq_gpio_request(ltq_pci_gpio_map[i].pin,
++ if (conf->gpio & (1 << i)) {
++ ltq_gpio_request(dev, ltq_pci_gpio_map[i].pin,
+ ltq_pci_gpio_map[i].mux,
+ ltq_pci_gpio_map[i].dir,
+ ltq_pci_gpio_map[i].name);
+ }
+ }
+- ltq_gpio_request(21, 0, 1, "pci-reset");
+- ltq_pci_req_mask = (gpio >> PCI_REQ_SHIFT) & PCI_REQ_MASK;
++ ltq_gpio_request(dev, 21, 0, 1, "pci-reset");
++ ltq_pci_req_mask = (conf->gpio >> PCI_REQ_SHIFT) & PCI_REQ_MASK;
+ }
+
+-static int __devinit ltq_pci_startup(struct ltq_pci_data *conf)
++static int __devinit ltq_pci_startup(struct device *dev)
+ {
+ u32 temp_buffer;
++ struct ltq_pci_data *conf = (struct ltq_pci_data *) dev->platform_data;
+
+ /* set clock to 33Mhz */
+ if (ltq_is_ar9()) {
+@@ -190,7 +192,7 @@ static int __devinit ltq_pci_startup(struct ltq_pci_data *conf)
+ }
+
+ /* setup pci clock and gpis used by pci */
+- ltq_pci_setup_gpio(conf->gpio);
++ ltq_pci_setup_gpio(dev);
+
+ /* enable auto-switching between PCI and EBU */
+ ltq_pci_w32(0xa, PCI_CR_CLK_CTRL);
+@@ -275,7 +277,7 @@ static int __devinit ltq_pci_probe(struct platform_device *pdev)
+ ioremap_nocache(LTQ_PCI_CFG_BASE, LTQ_PCI_CFG_BASE);
+ ltq_pci_controller.io_map_base =
+ (unsigned long)ioremap(LTQ_PCI_IO_BASE, LTQ_PCI_IO_SIZE - 1);
+- ltq_pci_startup(ltq_pci_data);
++ ltq_pci_startup(&pdev->dev);
+ register_pci_controller(<q_pci_controller);
+
+ return 0;
+diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
+index dddb9fe..fcbb9c7 100644
+--- a/drivers/net/ethernet/lantiq_etop.c
++++ b/drivers/net/ethernet/lantiq_etop.c
+@@ -291,9 +291,6 @@ ltq_etop_gbit_init(void)
+ {
+ ltq_pmu_enable(PMU_SWITCH);
+
+- ltq_gpio_request(42, 2, 1, "MDIO");
+- ltq_gpio_request(43, 2, 1, "MDC");
+-
+ ltq_gbit_w32_mask(0, GCTL0_SE, LTQ_GBIT_GCTL0);
+ /** Disable MDIO auto polling mode */
+ ltq_gbit_w32_mask(0, PX_CTL_DMDIO, LTQ_GBIT_P0_CTL);
+@@ -868,6 +865,12 @@ ltq_etop_probe(struct platform_device *pdev)
+ err = -ENOMEM;
+ goto err_out;
+ }
++ if (ltq_gpio_request(&pdev->dev, 42, 2, 1, "MDIO") ||
++ ltq_gpio_request(&pdev->dev, 43, 2, 1, "MDC")) {
++ dev_err(&pdev->dev, "failed to request MDIO gpios\n");
++ err = -EBUSY;
++ goto err_out;
++ }
+ }
+
+ dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
+diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
+index 96c1cac..5d25828 100644
+--- a/drivers/tty/serial/lantiq.c
++++ b/drivers/tty/serial/lantiq.c
+@@ -107,6 +107,9 @@
+ #define ASCFSTAT_TXFREEMASK 0x3F000000
+ #define ASCFSTAT_TXFREEOFF 24
+
++#define MUXC_SIF_RX_PIN 112
++#define MUXC_SIF_TX_PIN 113
++
+ static void lqasc_tx_chars(struct uart_port *port);
+ static struct ltq_uart_port *lqasc_port[MAXPORTS];
+ static struct uart_driver lqasc_reg;
+@@ -529,6 +532,15 @@ lqasc_request_port(struct uart_port *port)
+ if (port->membase == NULL)
+ return -ENOMEM;
+ }
++ if (ltq_is_falcon() && (port->line == 1)) {
++ struct ltq_uart_port *ltq_port = lqasc_port[pdev->id];
++ if (ltq_gpio_request(&pdev->dev, MUXC_SIF_RX_PIN,
++ 3, 0, "asc1-rx"))
++ return -EBUSY;
++ if (ltq_gpio_request(&pdev->dev, MUXC_SIF_TX_PIN,
++ 3, 1, "asc1-tx"))
++ return -EBUSY;
++ }
+ return 0;
+ }
+
+--
+1.7.9.1
+
+++ /dev/null
-From 6916ef9742e45213d524b69700d937976098d1e6 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 15 Nov 2011 15:56:06 +0100
-Subject: [PATCH 21/70] NET: MIPS: lantiq: return value of request_irq was not
- handled gracefully
-
-The return values of request_irq() were not checked leading to the following
-error message.
-
-drivers/net/ethernet/lantiq_etop.c: In function 'ltq_etop_hw_init':
-drivers/net/ethernet/lantiq_etop.c:368:15: warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result
-drivers/net/ethernet/lantiq_etop.c:377:15: warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: netdev@vger.kernel.org
----
- drivers/net/ethernet/lantiq_etop.c | 14 ++++++++------
- 1 files changed, 8 insertions(+), 6 deletions(-)
-
---- a/drivers/net/ethernet/lantiq_etop.c
-+++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -312,6 +312,7 @@ ltq_etop_hw_init(struct net_device *dev)
- {
- struct ltq_etop_priv *priv = netdev_priv(dev);
- unsigned int mii_mode = priv->pldata->mii_mode;
-+ int err = 0;
- int i;
-
- ltq_pmu_enable(PMU_PPE);
-@@ -356,7 +357,7 @@ ltq_etop_hw_init(struct net_device *dev)
-
- ltq_dma_init_port(DMA_PORT_ETOP);
-
-- for (i = 0; i < MAX_DMA_CHAN; i++) {
-+ for (i = 0; i < MAX_DMA_CHAN && !err; i++) {
- int irq = LTQ_DMA_ETOP + i;
- struct ltq_etop_chan *ch = &priv->ch[i];
-
-@@ -364,21 +365,22 @@ ltq_etop_hw_init(struct net_device *dev)
-
- if (IS_TX(i)) {
- ltq_dma_alloc_tx(&ch->dma);
-- request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
-+ err = request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
- "etop_tx", priv);
- } else if (IS_RX(i)) {
- ltq_dma_alloc_rx(&ch->dma);
- for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
- ch->dma.desc++)
- if (ltq_etop_alloc_skb(ch))
-- return -ENOMEM;
-+ err = -ENOMEM;
- ch->dma.desc = 0;
-- request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
-+ err = request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
- "etop_rx", priv);
- }
-- ch->dma.irq = irq;
-+ if (!err)
-+ ch->dma.irq = irq;
- }
-- return 0;
-+ return err;
- }
-
- static void
--- /dev/null
+From 98f3072e25ba8b7552e51309b05b8c643725dec9 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 16 Feb 2012 20:23:36 +0100
+Subject: [PATCH 22/73] MIPS: add clkdev.h
+
+For clkdev to work on MIPS we need this file
+
+include/linux/clkdev.h:#include <asm/clkdev.h>
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/include/asm/clkdev.h | 25 +++++++++++++++++++++++++
+ 1 files changed, 25 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/include/asm/clkdev.h
+
+diff --git a/arch/mips/include/asm/clkdev.h b/arch/mips/include/asm/clkdev.h
+new file mode 100644
+index 0000000..2624754
+--- /dev/null
++++ b/arch/mips/include/asm/clkdev.h
+@@ -0,0 +1,25 @@
++/*
++ * based on arch/arm/include/asm/clkdev.h
++ *
++ * Copyright (C) 2008 Russell King.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Helper for the clk API to assist looking up a struct clk.
++ */
++#ifndef __ASM_CLKDEV_H
++#define __ASM_CLKDEV_H
++
++#include <linux/slab.h>
++
++#define __clk_get(clk) ({ 1; })
++#define __clk_put(clk) do { } while (0)
++
++static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size)
++{
++ return kzalloc(size, GFP_KERNEL);
++}
++
++#endif
+--
+1.7.9.1
+
+++ /dev/null
-From 9819317c005d57e1a5924af1faa43f73ed156a2d Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 8 Mar 2012 08:37:25 +0100
-Subject: [PATCH 22/70] MIPS: lantiq: use devres managed gpios
-
-3.2 introduced devm_request_gpio() to allow managed gpios.
-
-The devres api requires a struct device pointer to work. Add a parameter to ltq_gpio_request()
-so that managed gpios can work.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- .../include/asm/mach-lantiq/falcon/lantiq_soc.h | 4 +---
- arch/mips/include/asm/mach-lantiq/lantiq.h | 4 ++++
- .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 3 ---
- arch/mips/lantiq/falcon/gpio.c | 4 ++--
- arch/mips/lantiq/falcon/prom.c | 7 -------
- arch/mips/lantiq/xway/gpio.c | 4 ++--
- arch/mips/lantiq/xway/gpio_stp.c | 13 ++++++++-----
- arch/mips/pci/pci-lantiq.c | 18 ++++++++++--------
- drivers/net/ethernet/lantiq_etop.c | 9 ++++++---
- drivers/tty/serial/lantiq.c | 12 ++++++++++++
- 10 files changed, 45 insertions(+), 33 deletions(-)
-
---- a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
-+++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
-@@ -126,9 +126,7 @@ extern __iomem void *ltq_sys1_membase;
- #define ltq_sys1_w32_mask(clear, set, reg) \
- ltq_sys1_w32((ltq_sys1_r32(reg) & ~(clear)) | (set), reg)
-
--/* gpio_request wrapper to help configure the pin */
--extern int ltq_gpio_request(unsigned int pin, unsigned int mux,
-- unsigned int dir, const char *name);
-+/* gpio wrapper to help configure the pin muxing */
- extern int ltq_gpio_mux_set(unsigned int pin, unsigned int mux);
-
- /* to keep the irq code generic we need to define these to 0 as falcon
---- a/arch/mips/include/asm/mach-lantiq/lantiq.h
-+++ b/arch/mips/include/asm/mach-lantiq/lantiq.h
-@@ -37,6 +37,10 @@ extern unsigned int ltq_get_soc_type(voi
- /* spinlock all ebu i/o */
- extern spinlock_t ebu_lock;
-
-+/* request a non-gpio and set the PIO config */
-+extern int ltq_gpio_request(struct device *dev, unsigned int pin,
-+ unsigned int mux, unsigned int dir, const char *name);
-+
- /* some irq helpers */
- extern void ltq_disable_irq(struct irq_data *data);
- extern void ltq_mask_and_ack_irq(struct irq_data *data);
---- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-@@ -145,9 +145,6 @@
- extern __iomem void *ltq_ebu_membase;
- extern __iomem void *ltq_cgu_membase;
-
--/* request a non-gpio and set the PIO config */
--extern int ltq_gpio_request(unsigned int pin, unsigned int mux,
-- unsigned int dir, const char *name);
- extern void ltq_pmu_enable(unsigned int module);
- extern void ltq_pmu_disable(unsigned int module);
- extern void ltq_cgu_enable(unsigned int clk);
---- a/arch/mips/lantiq/falcon/gpio.c
-+++ b/arch/mips/lantiq/falcon/gpio.c
-@@ -97,7 +97,7 @@ int ltq_gpio_mux_set(unsigned int pin, u
- }
- EXPORT_SYMBOL(ltq_gpio_mux_set);
-
--int ltq_gpio_request(unsigned int pin, unsigned int mux,
-+int ltq_gpio_request(struct device *dev, unsigned int pin, unsigned int mux,
- unsigned int dir, const char *name)
- {
- int port = pin / 100;
-@@ -106,7 +106,7 @@ int ltq_gpio_request(unsigned int pin, u
- if (offset >= PINS_PER_PORT || port >= MAX_PORTS)
- return -EINVAL;
-
-- if (gpio_request(pin, name)) {
-+ if (devm_gpio_request(dev, pin, name)) {
- pr_err("failed to setup lantiq gpio: %s\n", name);
- return -EBUSY;
- }
---- a/arch/mips/lantiq/falcon/prom.c
-+++ b/arch/mips/lantiq/falcon/prom.c
-@@ -27,9 +27,6 @@
- #define TYPE_SHIFT 26
- #define TYPE_MASK 0x3C000000
-
--#define MUXC_SIF_RX_PIN 112
--#define MUXC_SIF_TX_PIN 113
--
- /* this parameter allows us enable/disable asc1 via commandline */
- static int register_asc1;
- static int __init
-@@ -48,10 +45,6 @@ ltq_soc_setup(void)
- falcon_register_gpio();
- if (register_asc1) {
- ltq_register_asc(1);
-- if (ltq_gpio_request(MUXC_SIF_RX_PIN, 3, 0, "asc1-rx"))
-- pr_err("failed to request asc1-rx");
-- if (ltq_gpio_request(MUXC_SIF_TX_PIN, 3, 1, "asc1-tx"))
-- pr_err("failed to request asc1-tx");
- ltq_sysctl_activate(SYSCTL_SYS1, ACTS_ASC1_ACT);
- }
- }
---- a/arch/mips/lantiq/xway/gpio.c
-+++ b/arch/mips/lantiq/xway/gpio.c
-@@ -50,14 +50,14 @@ int irq_to_gpio(unsigned int gpio)
- }
- EXPORT_SYMBOL(irq_to_gpio);
-
--int ltq_gpio_request(unsigned int pin, unsigned int mux,
-+int ltq_gpio_request(struct device *dev, unsigned int pin, unsigned int mux,
- unsigned int dir, const char *name)
- {
- int id = 0;
-
- if (pin >= (MAX_PORTS * PINS_PER_PORT))
- return -EINVAL;
-- if (gpio_request(pin, name)) {
-+ if (devm_gpio_request(dev, pin, name)) {
- pr_err("failed to setup lantiq gpio: %s\n", name);
- return -EBUSY;
- }
---- a/arch/mips/lantiq/xway/gpio_stp.c
-+++ b/arch/mips/lantiq/xway/gpio_stp.c
-@@ -80,11 +80,6 @@ static struct gpio_chip ltq_stp_chip = {
-
- static int ltq_stp_hw_init(void)
- {
-- /* the 3 pins used to control the external stp */
-- ltq_gpio_request(4, 2, 1, "stp-st");
-- ltq_gpio_request(5, 2, 1, "stp-d");
-- ltq_gpio_request(6, 2, 1, "stp-sh");
--
- /* sane defaults */
- ltq_stp_w32(0, LTQ_STP_AR);
- ltq_stp_w32(0, LTQ_STP_CPU0);
-@@ -133,6 +128,14 @@ static int __devinit ltq_stp_probe(struc
- dev_err(&pdev->dev, "failed to remap STP memory\n");
- return -ENOMEM;
- }
-+
-+ /* the 3 pins used to control the external stp */
-+ if (ltq_gpio_request(&pdev->dev, 4, 2, 1, "stp-st") ||
-+ ltq_gpio_request(&pdev->dev, 5, 2, 1, "stp-d") ||
-+ ltq_gpio_request(&pdev->dev, 6, 2, 1, "stp-sh")) {
-+ dev_err(&pdev->dev, "failed to request needed gpios\n");
-+ return -EBUSY;
-+ }
- ret = gpiochip_add(<q_stp_chip);
- if (!ret)
- ret = ltq_stp_hw_init();
---- a/arch/mips/pci/pci-lantiq.c
-+++ b/arch/mips/pci/pci-lantiq.c
-@@ -150,24 +150,26 @@ static u32 ltq_calc_bar11mask(void)
- return bar11mask;
- }
-
--static void ltq_pci_setup_gpio(int gpio)
-+static void ltq_pci_setup_gpio(struct device *dev)
- {
-+ struct ltq_pci_data *conf = (struct ltq_pci_data *) dev->platform_data;
- int i;
- for (i = 0; i < ARRAY_SIZE(ltq_pci_gpio_map); i++) {
-- if (gpio & (1 << i)) {
-- ltq_gpio_request(ltq_pci_gpio_map[i].pin,
-+ if (conf->gpio & (1 << i)) {
-+ ltq_gpio_request(dev, ltq_pci_gpio_map[i].pin,
- ltq_pci_gpio_map[i].mux,
- ltq_pci_gpio_map[i].dir,
- ltq_pci_gpio_map[i].name);
- }
- }
-- ltq_gpio_request(21, 0, 1, "pci-reset");
-- ltq_pci_req_mask = (gpio >> PCI_REQ_SHIFT) & PCI_REQ_MASK;
-+ ltq_gpio_request(dev, 21, 0, 1, "pci-reset");
-+ ltq_pci_req_mask = (conf->gpio >> PCI_REQ_SHIFT) & PCI_REQ_MASK;
- }
-
--static int __devinit ltq_pci_startup(struct ltq_pci_data *conf)
-+static int __devinit ltq_pci_startup(struct device *dev)
- {
- u32 temp_buffer;
-+ struct ltq_pci_data *conf = (struct ltq_pci_data *) dev->platform_data;
-
- /* set clock to 33Mhz */
- if (ltq_is_ar9()) {
-@@ -190,7 +192,7 @@ static int __devinit ltq_pci_startup(str
- }
-
- /* setup pci clock and gpis used by pci */
-- ltq_pci_setup_gpio(conf->gpio);
-+ ltq_pci_setup_gpio(dev);
-
- /* enable auto-switching between PCI and EBU */
- ltq_pci_w32(0xa, PCI_CR_CLK_CTRL);
-@@ -275,7 +277,7 @@ static int __devinit ltq_pci_probe(struc
- ioremap_nocache(LTQ_PCI_CFG_BASE, LTQ_PCI_CFG_BASE);
- ltq_pci_controller.io_map_base =
- (unsigned long)ioremap(LTQ_PCI_IO_BASE, LTQ_PCI_IO_SIZE - 1);
-- ltq_pci_startup(ltq_pci_data);
-+ ltq_pci_startup(&pdev->dev);
- register_pci_controller(<q_pci_controller);
-
- return 0;
---- a/drivers/net/ethernet/lantiq_etop.c
-+++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -291,9 +291,6 @@ ltq_etop_gbit_init(void)
- {
- ltq_pmu_enable(PMU_SWITCH);
-
-- ltq_gpio_request(42, 2, 1, "MDIO");
-- ltq_gpio_request(43, 2, 1, "MDC");
--
- ltq_gbit_w32_mask(0, GCTL0_SE, LTQ_GBIT_GCTL0);
- /** Disable MDIO auto polling mode */
- ltq_gbit_w32_mask(0, PX_CTL_DMDIO, LTQ_GBIT_P0_CTL);
-@@ -868,6 +865,12 @@ ltq_etop_probe(struct platform_device *p
- err = -ENOMEM;
- goto err_out;
- }
-+ if (ltq_gpio_request(&pdev->dev, 42, 2, 1, "MDIO") ||
-+ ltq_gpio_request(&pdev->dev, 43, 2, 1, "MDC")) {
-+ dev_err(&pdev->dev, "failed to request MDIO gpios\n");
-+ err = -EBUSY;
-+ goto err_out;
-+ }
- }
-
- dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4);
---- a/drivers/tty/serial/lantiq.c
-+++ b/drivers/tty/serial/lantiq.c
-@@ -107,6 +107,9 @@
- #define ASCFSTAT_TXFREEMASK 0x3F000000
- #define ASCFSTAT_TXFREEOFF 24
-
-+#define MUXC_SIF_RX_PIN 112
-+#define MUXC_SIF_TX_PIN 113
-+
- static void lqasc_tx_chars(struct uart_port *port);
- static struct ltq_uart_port *lqasc_port[MAXPORTS];
- static struct uart_driver lqasc_reg;
-@@ -529,6 +532,15 @@ lqasc_request_port(struct uart_port *por
- if (port->membase == NULL)
- return -ENOMEM;
- }
-+ if (ltq_is_falcon() && (port->line == 1)) {
-+ struct ltq_uart_port *ltq_port = lqasc_port[pdev->id];
-+ if (ltq_gpio_request(&pdev->dev, MUXC_SIF_RX_PIN,
-+ 3, 0, "asc1-rx"))
-+ return -EBUSY;
-+ if (ltq_gpio_request(&pdev->dev, MUXC_SIF_TX_PIN,
-+ 3, 1, "asc1-tx"))
-+ return -EBUSY;
-+ }
- return 0;
- }
-
+++ /dev/null
-From aeb5a729386db036163fa21a8f5e5e1f9a735ebf Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 16 Feb 2012 20:23:36 +0100
-Subject: [PATCH 23/70] MIPS: add clkdev.h
-
-For clkdev to work on MIPS we need this file
-
-include/linux/clkdev.h:#include <asm/clkdev.h>
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/include/asm/clkdev.h | 25 +++++++++++++++++++++++++
- 1 files changed, 25 insertions(+), 0 deletions(-)
- create mode 100644 arch/mips/include/asm/clkdev.h
-
---- /dev/null
-+++ b/arch/mips/include/asm/clkdev.h
-@@ -0,0 +1,25 @@
-+/*
-+ * based on arch/arm/include/asm/clkdev.h
-+ *
-+ * Copyright (C) 2008 Russell King.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * Helper for the clk API to assist looking up a struct clk.
-+ */
-+#ifndef __ASM_CLKDEV_H
-+#define __ASM_CLKDEV_H
-+
-+#include <linux/slab.h>
-+
-+#define __clk_get(clk) ({ 1; })
-+#define __clk_put(clk) do { } while (0)
-+
-+static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size)
-+{
-+ return kzalloc(size, GFP_KERNEL);
-+}
-+
-+#endif
--- /dev/null
+From ba0e580e5af68726cea08990891fc4abf1cfcde4 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 21 Feb 2012 14:25:03 +0100
+Subject: [PATCH 23/73] MIPS: lantiq: helper functions for SoC detection
+
+Add additional functions for runtime soc detection. We need these for the
+serial driver.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ .../include/asm/mach-lantiq/falcon/lantiq_soc.h | 16 ++++++++++++++--
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 5 +++++
+ 2 files changed, 19 insertions(+), 2 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+index a5dc06a..0aa1f16 100644
+--- a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+@@ -134,8 +134,20 @@ extern int ltq_gpio_mux_set(unsigned int pin, unsigned int mux);
+ #define LTQ_EIU_BASE_ADDR 0
+ #define LTQ_EBU_PCC_ISTAT 0
+
+-#define ltq_is_ar9() 0
+-#define ltq_is_vr9() 0
++static inline int ltq_is_ar9(void)
++{
++ return 0;
++}
++
++static inline int ltq_is_vr9(void)
++{
++ return 0;
++}
++
++static inline int ltq_is_falcon(void)
++{
++ return 1;
++}
+
+ #endif /* CONFIG_SOC_FALCON */
+ #endif /* _LTQ_XWAY_H__ */
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index 6c5b705..45e480c 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -164,5 +164,10 @@ static inline int ltq_is_vr9(void)
+ return (ltq_get_soc_type() == SOC_TYPE_VR9);
+ }
+
++static inline int ltq_is_falcon(void)
++{
++ return 0;
++}
++
+ #endif /* CONFIG_SOC_TYPE_XWAY */
+ #endif /* _LTQ_XWAY_H__ */
+--
+1.7.9.1
+
--- /dev/null
+From a5124da58605e1717b57953bce56301ea0b33d25 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 08:39:06 +0100
+Subject: [PATCH 24/73] MIPS: lantiq: convert to clkdev api
+
+* Change setup from HAVE_CLK -> HAVE_MACH_CLKDEV/CLKDEV_LOOKUP
+* Add clk_activate/clk_deactivate
+* Add better error paths to the clk_*() functions
+* Change the way our static clocks are referenced
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/Kconfig | 3 +-
+ arch/mips/include/asm/mach-lantiq/lantiq.h | 20 ++----
+ arch/mips/lantiq/clk.c | 96 +++++++++++++++------------
+ arch/mips/lantiq/clk.h | 52 ++++++++++++++-
+ arch/mips/lantiq/prom.c | 1 -
+ 5 files changed, 111 insertions(+), 61 deletions(-)
+
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index c1ceadb..1b78cd7 100644
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -225,7 +225,8 @@ config LANTIQ
+ select ARCH_REQUIRE_GPIOLIB
+ select SWAP_IO_SPACE
+ select BOOT_RAW
+- select HAVE_CLK
++ select HAVE_MACH_CLKDEV
++ select CLKDEV_LOOKUP
+ select HAVE_OPROFILE
+ select MIPS_MACHINE
+
+diff --git a/arch/mips/include/asm/mach-lantiq/lantiq.h b/arch/mips/include/asm/mach-lantiq/lantiq.h
+index 924b91a..622847f 100644
+--- a/arch/mips/include/asm/mach-lantiq/lantiq.h
++++ b/arch/mips/include/asm/mach-lantiq/lantiq.h
+@@ -9,6 +9,7 @@
+ #define _LANTIQ_H__
+
+ #include <linux/irq.h>
++#include <linux/clk.h>
+ #include <linux/ioport.h>
+
+ /* generic reg access functions */
+@@ -22,18 +23,6 @@
+ extern unsigned int ltq_get_cpu_ver(void);
+ extern unsigned int ltq_get_soc_type(void);
+
+-/* clock speeds */
+-#define CLOCK_60M 60000000
+-#define CLOCK_83M 83333333
+-#define CLOCK_100M 100000000
+-#define CLOCK_111M 111111111
+-#define CLOCK_133M 133333333
+-#define CLOCK_167M 166666667
+-#define CLOCK_200M 200000000
+-#define CLOCK_266M 266666666
+-#define CLOCK_333M 333333333
+-#define CLOCK_400M 400000000
+-
+ /* spinlock all ebu i/o */
+ extern spinlock_t ebu_lock;
+
+@@ -46,6 +35,13 @@ extern void ltq_disable_irq(struct irq_data *data);
+ extern void ltq_mask_and_ack_irq(struct irq_data *data);
+ extern void ltq_enable_irq(struct irq_data *data);
+
++/* clock handling */
++extern int clk_activate(struct clk *clk);
++extern void clk_deactivate(struct clk *clk);
++extern struct clk *clk_get_cpu(void);
++extern struct clk *clk_get_fpi(void);
++extern struct clk *clk_get_io(void);
++
+ /* find out what caused the last cpu reset */
+ extern int ltq_reset_cause(void);
+
+diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c
+index 39eef7f..84a201e 100644
+--- a/arch/mips/lantiq/clk.c
++++ b/arch/mips/lantiq/clk.c
+@@ -12,6 +12,7 @@
+ #include <linux/kernel.h>
+ #include <linux/types.h>
+ #include <linux/clk.h>
++#include <linux/clkdev.h>
+ #include <linux/err.h>
+ #include <linux/list.h>
+
+@@ -24,33 +25,29 @@
+ #include "clk.h"
+ #include "prom.h"
+
+-struct clk {
+- const char *name;
+- unsigned long rate;
+- unsigned long (*get_rate) (void);
+-};
++/* lantiq socs have 3 static clocks */
++static struct clk cpu_clk_generic[3];
+
+-static struct clk *cpu_clk;
+-static int cpu_clk_cnt;
++void clkdev_add_static(unsigned long cpu, unsigned long fpi, unsigned long io)
++{
++ cpu_clk_generic[0].rate = cpu;
++ cpu_clk_generic[1].rate = fpi;
++ cpu_clk_generic[2].rate = io;
++}
+
+-/* lantiq socs have 3 static clocks */
+-static struct clk cpu_clk_generic[] = {
+- {
+- .name = "cpu",
+- .get_rate = ltq_get_cpu_hz,
+- }, {
+- .name = "fpi",
+- .get_rate = ltq_get_fpi_hz,
+- }, {
+- .name = "io",
+- .get_rate = ltq_get_io_region_clock,
+- },
+-};
+-
+-void clk_init(void)
++struct clk *clk_get_cpu(void)
++{
++ return &cpu_clk_generic[0];
++}
++
++struct clk *clk_get_fpi(void)
+ {
+- cpu_clk = cpu_clk_generic;
+- cpu_clk_cnt = ARRAY_SIZE(cpu_clk_generic);
++ return &cpu_clk_generic[1];
++}
++
++struct clk *clk_get_io(void)
++{
++ return &cpu_clk_generic[2];
+ }
+
+ static inline int clk_good(struct clk *clk)
+@@ -73,36 +70,49 @@ unsigned long clk_get_rate(struct clk *clk)
+ }
+ EXPORT_SYMBOL(clk_get_rate);
+
+-struct clk *clk_get(struct device *dev, const char *id)
++int clk_enable(struct clk *clk)
+ {
+- int i;
++ if (unlikely(!clk_good(clk)))
++ return -1;
++
++ if (clk->enable)
++ return clk->enable(clk);
+
+- for (i = 0; i < cpu_clk_cnt; i++)
+- if (!strcmp(id, cpu_clk[i].name))
+- return &cpu_clk[i];
+- BUG();
+- return ERR_PTR(-ENOENT);
++ return -1;
+ }
+-EXPORT_SYMBOL(clk_get);
++EXPORT_SYMBOL(clk_enable);
+
+-void clk_put(struct clk *clk)
++void clk_disable(struct clk *clk)
+ {
+- /* not used */
++ if (unlikely(!clk_good(clk)))
++ return;
++
++ if (clk->disable)
++ clk->disable(clk);
+ }
+-EXPORT_SYMBOL(clk_put);
++EXPORT_SYMBOL(clk_disable);
+
+-int clk_enable(struct clk *clk)
++int clk_activate(struct clk *clk)
+ {
+- /* not used */
+- return 0;
++ if (unlikely(!clk_good(clk)))
++ return -1;
++
++ if (clk->activate)
++ return clk->activate(clk);
++
++ return -1;
+ }
+-EXPORT_SYMBOL(clk_enable);
++EXPORT_SYMBOL(clk_activate);
+
+-void clk_disable(struct clk *clk)
++void clk_deactivate(struct clk *clk)
+ {
+- /* not used */
++ if (unlikely(!clk_good(clk)))
++ return;
++
++ if (clk->deactivate)
++ clk->deactivate(clk);
+ }
+-EXPORT_SYMBOL(clk_disable);
++EXPORT_SYMBOL(clk_deactivate);
+
+ static inline u32 ltq_get_counter_resolution(void)
+ {
+@@ -126,7 +136,7 @@ void __init plat_time_init(void)
+
+ ltq_soc_init();
+
+- clk = clk_get(0, "cpu");
++ clk = clk_get_cpu();
+ mips_hpt_frequency = clk_get_rate(clk) / ltq_get_counter_resolution();
+ write_c0_compare(read_c0_count());
+ pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
+diff --git a/arch/mips/lantiq/clk.h b/arch/mips/lantiq/clk.h
+index 3328925..d047768 100644
+--- a/arch/mips/lantiq/clk.h
++++ b/arch/mips/lantiq/clk.h
+@@ -9,10 +9,54 @@
+ #ifndef _LTQ_CLK_H__
+ #define _LTQ_CLK_H__
+
+-extern void clk_init(void);
++#include <linux/clkdev.h>
+
+-extern unsigned long ltq_get_cpu_hz(void);
+-extern unsigned long ltq_get_fpi_hz(void);
+-extern unsigned long ltq_get_io_region_clock(void);
++/* clock speeds */
++#define CLOCK_60M 60000000
++#define CLOCK_62_5M 62500000
++#define CLOCK_83M 83333333
++#define CLOCK_83_5M 83500000
++#define CLOCK_98_304M 98304000
++#define CLOCK_100M 100000000
++#define CLOCK_111M 111111111
++#define CLOCK_125M 125000000
++#define CLOCK_133M 133333333
++#define CLOCK_150M 150000000
++#define CLOCK_166M 166666666
++#define CLOCK_167M 166666667
++#define CLOCK_196_608M 196608000
++#define CLOCK_200M 200000000
++#define CLOCK_250M 250000000
++#define CLOCK_266M 266666666
++#define CLOCK_300M 300000000
++#define CLOCK_333M 333333333
++#define CLOCK_393M 393215332
++#define CLOCK_400M 400000000
++#define CLOCK_500M 500000000
++#define CLOCK_600M 600000000
++
++struct clk {
++ struct clk_lookup cl;
++ unsigned long rate;
++ unsigned long (*get_rate) (void);
++ unsigned int module;
++ unsigned int bits;
++ int (*enable) (struct clk *clk);
++ void (*disable) (struct clk *clk);
++ int (*activate) (struct clk *clk);
++ void (*deactivate) (struct clk *clk);
++ void (*reboot) (struct clk *clk);
++};
++
++extern void clkdev_add_static(unsigned long cpu, unsigned long fpi,
++ unsigned long io);
++
++extern unsigned long ltq_danube_cpu_hz(void);
++extern unsigned long ltq_danube_fpi_hz(void);
++extern unsigned long ltq_danube_io_region_clock(void);
++
++extern unsigned long ltq_vr9_cpu_hz(void);
++extern unsigned long ltq_vr9_fpi_hz(void);
++extern unsigned long ltq_vr9_io_region_clock(void);
+
+ #endif
+diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
+index acb8921..971554b 100644
+--- a/arch/mips/lantiq/prom.c
++++ b/arch/mips/lantiq/prom.c
+@@ -103,7 +103,6 @@ EXPORT_SYMBOL(ltq_remap_resource);
+ void __init prom_init(void)
+ {
+ ltq_soc_detect(&soc_info);
+- clk_init();
+ snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN - 1, "%s rev %s",
+ soc_info.name, soc_info.rev_type);
+ soc_info.sys_type[LTQ_SYS_TYPE_LEN - 1] = '\0';
+--
+1.7.9.1
+
+++ /dev/null
-From 8b47a5997efb253459fa62acce9c52202cbec9da Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 21 Feb 2012 14:25:03 +0100
-Subject: [PATCH 24/70] MIPS: lantiq: helper functions for SoC detection
-
-Add additional functions for runtime soc detection. We need these for the
-serial driver.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- .../include/asm/mach-lantiq/falcon/lantiq_soc.h | 16 ++++++++++++++--
- .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 5 +++++
- 2 files changed, 19 insertions(+), 2 deletions(-)
-
---- a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
-+++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
-@@ -134,8 +134,20 @@ extern int ltq_gpio_mux_set(unsigned int
- #define LTQ_EIU_BASE_ADDR 0
- #define LTQ_EBU_PCC_ISTAT 0
-
--#define ltq_is_ar9() 0
--#define ltq_is_vr9() 0
-+static inline int ltq_is_ar9(void)
-+{
-+ return 0;
-+}
-+
-+static inline int ltq_is_vr9(void)
-+{
-+ return 0;
-+}
-+
-+static inline int ltq_is_falcon(void)
-+{
-+ return 1;
-+}
-
- #endif /* CONFIG_SOC_FALCON */
- #endif /* _LTQ_XWAY_H__ */
---- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-@@ -164,5 +164,10 @@ static inline int ltq_is_vr9(void)
- return (ltq_get_soc_type() == SOC_TYPE_VR9);
- }
-
-+static inline int ltq_is_falcon(void)
-+{
-+ return 0;
-+}
-+
- #endif /* CONFIG_SOC_TYPE_XWAY */
- #endif /* _LTQ_XWAY_H__ */
+++ /dev/null
-From 25db3804c7c9ed3ee5161b00b38de84b1d19f6a8 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 8 Mar 2012 08:39:06 +0100
-Subject: [PATCH 25/70] MIPS: lantiq: convert to clkdev api
-
-* Change setup from HAVE_CLK -> HAVE_MACH_CLKDEV/CLKDEV_LOOKUP
-* Add clk_activate/clk_deactivate
-* Add better error paths to the clk_*() functions
-* Change the way our static clocks are referenced
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/Kconfig | 3 +-
- arch/mips/include/asm/mach-lantiq/lantiq.h | 20 ++----
- arch/mips/lantiq/clk.c | 96 +++++++++++++++------------
- arch/mips/lantiq/clk.h | 52 ++++++++++++++-
- arch/mips/lantiq/prom.c | 1 -
- 5 files changed, 111 insertions(+), 61 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -225,7 +225,8 @@ config LANTIQ
- select ARCH_REQUIRE_GPIOLIB
- select SWAP_IO_SPACE
- select BOOT_RAW
-- select HAVE_CLK
-+ select HAVE_MACH_CLKDEV
-+ select CLKDEV_LOOKUP
- select HAVE_OPROFILE
- select MIPS_MACHINE
-
---- a/arch/mips/include/asm/mach-lantiq/lantiq.h
-+++ b/arch/mips/include/asm/mach-lantiq/lantiq.h
-@@ -9,6 +9,7 @@
- #define _LANTIQ_H__
-
- #include <linux/irq.h>
-+#include <linux/clk.h>
- #include <linux/ioport.h>
-
- /* generic reg access functions */
-@@ -22,18 +23,6 @@
- extern unsigned int ltq_get_cpu_ver(void);
- extern unsigned int ltq_get_soc_type(void);
-
--/* clock speeds */
--#define CLOCK_60M 60000000
--#define CLOCK_83M 83333333
--#define CLOCK_100M 100000000
--#define CLOCK_111M 111111111
--#define CLOCK_133M 133333333
--#define CLOCK_167M 166666667
--#define CLOCK_200M 200000000
--#define CLOCK_266M 266666666
--#define CLOCK_333M 333333333
--#define CLOCK_400M 400000000
--
- /* spinlock all ebu i/o */
- extern spinlock_t ebu_lock;
-
-@@ -46,6 +35,13 @@ extern void ltq_disable_irq(struct irq_d
- extern void ltq_mask_and_ack_irq(struct irq_data *data);
- extern void ltq_enable_irq(struct irq_data *data);
-
-+/* clock handling */
-+extern int clk_activate(struct clk *clk);
-+extern void clk_deactivate(struct clk *clk);
-+extern struct clk *clk_get_cpu(void);
-+extern struct clk *clk_get_fpi(void);
-+extern struct clk *clk_get_io(void);
-+
- /* find out what caused the last cpu reset */
- extern int ltq_reset_cause(void);
-
---- a/arch/mips/lantiq/clk.c
-+++ b/arch/mips/lantiq/clk.c
-@@ -12,6 +12,7 @@
- #include <linux/kernel.h>
- #include <linux/types.h>
- #include <linux/clk.h>
-+#include <linux/clkdev.h>
- #include <linux/err.h>
- #include <linux/list.h>
-
-@@ -24,33 +25,29 @@
- #include "clk.h"
- #include "prom.h"
-
--struct clk {
-- const char *name;
-- unsigned long rate;
-- unsigned long (*get_rate) (void);
--};
-+/* lantiq socs have 3 static clocks */
-+static struct clk cpu_clk_generic[3];
-
--static struct clk *cpu_clk;
--static int cpu_clk_cnt;
-+void clkdev_add_static(unsigned long cpu, unsigned long fpi, unsigned long io)
-+{
-+ cpu_clk_generic[0].rate = cpu;
-+ cpu_clk_generic[1].rate = fpi;
-+ cpu_clk_generic[2].rate = io;
-+}
-
--/* lantiq socs have 3 static clocks */
--static struct clk cpu_clk_generic[] = {
-- {
-- .name = "cpu",
-- .get_rate = ltq_get_cpu_hz,
-- }, {
-- .name = "fpi",
-- .get_rate = ltq_get_fpi_hz,
-- }, {
-- .name = "io",
-- .get_rate = ltq_get_io_region_clock,
-- },
--};
-+struct clk *clk_get_cpu(void)
-+{
-+ return &cpu_clk_generic[0];
-+}
-+
-+struct clk *clk_get_fpi(void)
-+{
-+ return &cpu_clk_generic[1];
-+}
-
--void clk_init(void)
-+struct clk *clk_get_io(void)
- {
-- cpu_clk = cpu_clk_generic;
-- cpu_clk_cnt = ARRAY_SIZE(cpu_clk_generic);
-+ return &cpu_clk_generic[2];
- }
-
- static inline int clk_good(struct clk *clk)
-@@ -73,36 +70,49 @@ unsigned long clk_get_rate(struct clk *c
- }
- EXPORT_SYMBOL(clk_get_rate);
-
--struct clk *clk_get(struct device *dev, const char *id)
-+int clk_enable(struct clk *clk)
- {
-- int i;
-+ if (unlikely(!clk_good(clk)))
-+ return -1;
-
-- for (i = 0; i < cpu_clk_cnt; i++)
-- if (!strcmp(id, cpu_clk[i].name))
-- return &cpu_clk[i];
-- BUG();
-- return ERR_PTR(-ENOENT);
-+ if (clk->enable)
-+ return clk->enable(clk);
-+
-+ return -1;
- }
--EXPORT_SYMBOL(clk_get);
-+EXPORT_SYMBOL(clk_enable);
-
--void clk_put(struct clk *clk)
-+void clk_disable(struct clk *clk)
- {
-- /* not used */
-+ if (unlikely(!clk_good(clk)))
-+ return;
-+
-+ if (clk->disable)
-+ clk->disable(clk);
- }
--EXPORT_SYMBOL(clk_put);
-+EXPORT_SYMBOL(clk_disable);
-
--int clk_enable(struct clk *clk)
-+int clk_activate(struct clk *clk)
- {
-- /* not used */
-- return 0;
-+ if (unlikely(!clk_good(clk)))
-+ return -1;
-+
-+ if (clk->activate)
-+ return clk->activate(clk);
-+
-+ return -1;
- }
--EXPORT_SYMBOL(clk_enable);
-+EXPORT_SYMBOL(clk_activate);
-
--void clk_disable(struct clk *clk)
-+void clk_deactivate(struct clk *clk)
- {
-- /* not used */
-+ if (unlikely(!clk_good(clk)))
-+ return;
-+
-+ if (clk->deactivate)
-+ clk->deactivate(clk);
- }
--EXPORT_SYMBOL(clk_disable);
-+EXPORT_SYMBOL(clk_deactivate);
-
- static inline u32 ltq_get_counter_resolution(void)
- {
-@@ -126,7 +136,7 @@ void __init plat_time_init(void)
-
- ltq_soc_init();
-
-- clk = clk_get(0, "cpu");
-+ clk = clk_get_cpu();
- mips_hpt_frequency = clk_get_rate(clk) / ltq_get_counter_resolution();
- write_c0_compare(read_c0_count());
- pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
---- a/arch/mips/lantiq/clk.h
-+++ b/arch/mips/lantiq/clk.h
-@@ -9,10 +9,54 @@
- #ifndef _LTQ_CLK_H__
- #define _LTQ_CLK_H__
-
--extern void clk_init(void);
-+#include <linux/clkdev.h>
-
--extern unsigned long ltq_get_cpu_hz(void);
--extern unsigned long ltq_get_fpi_hz(void);
--extern unsigned long ltq_get_io_region_clock(void);
-+/* clock speeds */
-+#define CLOCK_60M 60000000
-+#define CLOCK_62_5M 62500000
-+#define CLOCK_83M 83333333
-+#define CLOCK_83_5M 83500000
-+#define CLOCK_98_304M 98304000
-+#define CLOCK_100M 100000000
-+#define CLOCK_111M 111111111
-+#define CLOCK_125M 125000000
-+#define CLOCK_133M 133333333
-+#define CLOCK_150M 150000000
-+#define CLOCK_166M 166666666
-+#define CLOCK_167M 166666667
-+#define CLOCK_196_608M 196608000
-+#define CLOCK_200M 200000000
-+#define CLOCK_250M 250000000
-+#define CLOCK_266M 266666666
-+#define CLOCK_300M 300000000
-+#define CLOCK_333M 333333333
-+#define CLOCK_393M 393215332
-+#define CLOCK_400M 400000000
-+#define CLOCK_500M 500000000
-+#define CLOCK_600M 600000000
-+
-+struct clk {
-+ struct clk_lookup cl;
-+ unsigned long rate;
-+ unsigned long (*get_rate) (void);
-+ unsigned int module;
-+ unsigned int bits;
-+ int (*enable) (struct clk *clk);
-+ void (*disable) (struct clk *clk);
-+ int (*activate) (struct clk *clk);
-+ void (*deactivate) (struct clk *clk);
-+ void (*reboot) (struct clk *clk);
-+};
-+
-+extern void clkdev_add_static(unsigned long cpu, unsigned long fpi,
-+ unsigned long io);
-+
-+extern unsigned long ltq_danube_cpu_hz(void);
-+extern unsigned long ltq_danube_fpi_hz(void);
-+extern unsigned long ltq_danube_io_region_clock(void);
-+
-+extern unsigned long ltq_vr9_cpu_hz(void);
-+extern unsigned long ltq_vr9_fpi_hz(void);
-+extern unsigned long ltq_vr9_io_region_clock(void);
-
- #endif
---- a/arch/mips/lantiq/prom.c
-+++ b/arch/mips/lantiq/prom.c
-@@ -103,7 +103,6 @@ EXPORT_SYMBOL(ltq_remap_resource);
- void __init prom_init(void)
- {
- ltq_soc_detect(&soc_info);
-- clk_init();
- snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN - 1, "%s rev %s",
- soc_info.name, soc_info.rev_type);
- soc_info.sys_type[LTQ_SYS_TYPE_LEN - 1] = '\0';
--- /dev/null
+From b6a73eaeb10726bb30584aa8aa4620061db653ba Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 11:18:22 +0100
+Subject: [PATCH 25/73] MIPS: lantiq: convert xway to clkdev api
+
+Unify xway/ase clock code and add clkdev hooks to sysctrl.c
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 13 --
+ arch/mips/lantiq/xway/Makefile | 6 +-
+ arch/mips/lantiq/xway/clk-ase.c | 48 ----
+ arch/mips/lantiq/xway/clk-xway.c | 223 -------------------
+ arch/mips/lantiq/xway/clk.c | 227 ++++++++++++++++++++
+ arch/mips/lantiq/xway/sysctrl.c | 104 ++++++++-
+ 6 files changed, 325 insertions(+), 296 deletions(-)
+ delete mode 100644 arch/mips/lantiq/xway/clk-ase.c
+ delete mode 100644 arch/mips/lantiq/xway/clk-xway.c
+ create mode 100644 arch/mips/lantiq/xway/clk.c
+
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index 45e480c..e9d2dd4 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -81,15 +81,6 @@
+ #define LTQ_PMU_BASE_ADDR 0x1F102000
+ #define LTQ_PMU_SIZE 0x1000
+
+-#define PMU_DMA 0x0020
+-#define PMU_EPHY 0x0080
+-#define PMU_USB 0x8041
+-#define PMU_LED 0x0800
+-#define PMU_GPT 0x1000
+-#define PMU_PPE 0x2000
+-#define PMU_FPI 0x4000
+-#define PMU_SWITCH 0x10000000
+-
+ /* ETOP - ethernet */
+ #define LTQ_ETOP_BASE_ADDR 0x1E180000
+ #define LTQ_ETOP_SIZE 0x40000
+@@ -145,10 +136,6 @@
+ extern __iomem void *ltq_ebu_membase;
+ extern __iomem void *ltq_cgu_membase;
+
+-extern void ltq_pmu_enable(unsigned int module);
+-extern void ltq_pmu_disable(unsigned int module);
+-extern void ltq_cgu_enable(unsigned int clk);
+-
+ static inline int ltq_is_ase(void)
+ {
+ return (ltq_get_soc_type() == SOC_TYPE_AMAZON_SE);
+diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
+index 6678402..4dcb96f 100644
+--- a/arch/mips/lantiq/xway/Makefile
++++ b/arch/mips/lantiq/xway/Makefile
+@@ -1,7 +1,7 @@
+-obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o
++obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o
+
+-obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o
+-obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o
++obj-$(CONFIG_SOC_XWAY) += prom-xway.o
++obj-$(CONFIG_SOC_AMAZON_SE) += prom-ase.o
+
+ obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
+ obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
+diff --git a/arch/mips/lantiq/xway/clk-ase.c b/arch/mips/lantiq/xway/clk-ase.c
+deleted file mode 100644
+index 6522583..0000000
+--- a/arch/mips/lantiq/xway/clk-ase.c
++++ /dev/null
+@@ -1,48 +0,0 @@
+-/*
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- *
+- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+- */
+-
+-#include <linux/io.h>
+-#include <linux/export.h>
+-#include <linux/init.h>
+-#include <linux/clk.h>
+-
+-#include <asm/time.h>
+-#include <asm/irq.h>
+-#include <asm/div64.h>
+-
+-#include <lantiq_soc.h>
+-
+-/* cgu registers */
+-#define LTQ_CGU_SYS 0x0010
+-
+-unsigned int ltq_get_io_region_clock(void)
+-{
+- return CLOCK_133M;
+-}
+-EXPORT_SYMBOL(ltq_get_io_region_clock);
+-
+-unsigned int ltq_get_fpi_bus_clock(int fpi)
+-{
+- return CLOCK_133M;
+-}
+-EXPORT_SYMBOL(ltq_get_fpi_bus_clock);
+-
+-unsigned int ltq_get_cpu_hz(void)
+-{
+- if (ltq_cgu_r32(LTQ_CGU_SYS) & (1 << 5))
+- return CLOCK_266M;
+- else
+- return CLOCK_133M;
+-}
+-EXPORT_SYMBOL(ltq_get_cpu_hz);
+-
+-unsigned int ltq_get_fpi_hz(void)
+-{
+- return CLOCK_133M;
+-}
+-EXPORT_SYMBOL(ltq_get_fpi_hz);
+diff --git a/arch/mips/lantiq/xway/clk-xway.c b/arch/mips/lantiq/xway/clk-xway.c
+deleted file mode 100644
+index 696b1a3..0000000
+--- a/arch/mips/lantiq/xway/clk-xway.c
++++ /dev/null
+@@ -1,223 +0,0 @@
+-/*
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- *
+- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+- */
+-
+-#include <linux/io.h>
+-#include <linux/export.h>
+-#include <linux/init.h>
+-#include <linux/clk.h>
+-
+-#include <asm/time.h>
+-#include <asm/irq.h>
+-#include <asm/div64.h>
+-
+-#include <lantiq_soc.h>
+-
+-static unsigned int ltq_ram_clocks[] = {
+- CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M };
+-#define DDR_HZ ltq_ram_clocks[ltq_cgu_r32(LTQ_CGU_SYS) & 0x3]
+-
+-#define BASIC_FREQUENCY_1 35328000
+-#define BASIC_FREQUENCY_2 36000000
+-#define BASIS_REQUENCY_USB 12000000
+-
+-#define GET_BITS(x, msb, lsb) \
+- (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
+-
+-#define LTQ_CGU_PLL0_CFG 0x0004
+-#define LTQ_CGU_PLL1_CFG 0x0008
+-#define LTQ_CGU_PLL2_CFG 0x000C
+-#define LTQ_CGU_SYS 0x0010
+-#define LTQ_CGU_UPDATE 0x0014
+-#define LTQ_CGU_IF_CLK 0x0018
+-#define LTQ_CGU_OSC_CON 0x001C
+-#define LTQ_CGU_SMD 0x0020
+-#define LTQ_CGU_CT1SR 0x0028
+-#define LTQ_CGU_CT2SR 0x002C
+-#define LTQ_CGU_PCMCR 0x0030
+-#define LTQ_CGU_PCI_CR 0x0034
+-#define LTQ_CGU_PD_PC 0x0038
+-#define LTQ_CGU_FMR 0x003C
+-
+-#define CGU_PLL0_PHASE_DIVIDER_ENABLE \
+- (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 31))
+-#define CGU_PLL0_BYPASS \
+- (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 30))
+-#define CGU_PLL0_CFG_DSMSEL \
+- (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 28))
+-#define CGU_PLL0_CFG_FRAC_EN \
+- (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 27))
+-#define CGU_PLL1_SRC \
+- (ltq_cgu_r32(LTQ_CGU_PLL1_CFG) & (1 << 31))
+-#define CGU_PLL2_PHASE_DIVIDER_ENABLE \
+- (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & (1 << 20))
+-#define CGU_SYS_FPI_SEL (1 << 6)
+-#define CGU_SYS_DDR_SEL 0x3
+-#define CGU_PLL0_SRC (1 << 29)
+-
+-#define CGU_PLL0_CFG_PLLK GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 26, 17)
+-#define CGU_PLL0_CFG_PLLN GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 12, 6)
+-#define CGU_PLL0_CFG_PLLM GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 5, 2)
+-#define CGU_PLL2_SRC GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 18, 17)
+-#define CGU_PLL2_CFG_INPUT_DIV GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 16, 13)
+-
+-static unsigned int ltq_get_pll0_fdiv(void);
+-
+-static inline unsigned int get_input_clock(int pll)
+-{
+- switch (pll) {
+- case 0:
+- if (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & CGU_PLL0_SRC)
+- return BASIS_REQUENCY_USB;
+- else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
+- return BASIC_FREQUENCY_1;
+- else
+- return BASIC_FREQUENCY_2;
+- case 1:
+- if (CGU_PLL1_SRC)
+- return BASIS_REQUENCY_USB;
+- else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
+- return BASIC_FREQUENCY_1;
+- else
+- return BASIC_FREQUENCY_2;
+- case 2:
+- switch (CGU_PLL2_SRC) {
+- case 0:
+- return ltq_get_pll0_fdiv();
+- case 1:
+- return CGU_PLL2_PHASE_DIVIDER_ENABLE ?
+- BASIC_FREQUENCY_1 :
+- BASIC_FREQUENCY_2;
+- case 2:
+- return BASIS_REQUENCY_USB;
+- }
+- default:
+- return 0;
+- }
+-}
+-
+-static inline unsigned int cal_dsm(int pll, unsigned int num, unsigned int den)
+-{
+- u64 res, clock = get_input_clock(pll);
+-
+- res = num * clock;
+- do_div(res, den);
+- return res;
+-}
+-
+-static inline unsigned int mash_dsm(int pll, unsigned int M, unsigned int N,
+- unsigned int K)
+-{
+- unsigned int num = ((N + 1) << 10) + K;
+- unsigned int den = (M + 1) << 10;
+-
+- return cal_dsm(pll, num, den);
+-}
+-
+-static inline unsigned int ssff_dsm_1(int pll, unsigned int M, unsigned int N,
+- unsigned int K)
+-{
+- unsigned int num = ((N + 1) << 11) + K + 512;
+- unsigned int den = (M + 1) << 11;
+-
+- return cal_dsm(pll, num, den);
+-}
+-
+-static inline unsigned int ssff_dsm_2(int pll, unsigned int M, unsigned int N,
+- unsigned int K)
+-{
+- unsigned int num = K >= 512 ?
+- ((N + 1) << 12) + K - 512 : ((N + 1) << 12) + K + 3584;
+- unsigned int den = (M + 1) << 12;
+-
+- return cal_dsm(pll, num, den);
+-}
+-
+-static inline unsigned int dsm(int pll, unsigned int M, unsigned int N,
+- unsigned int K, unsigned int dsmsel, unsigned int phase_div_en)
+-{
+- if (!dsmsel)
+- return mash_dsm(pll, M, N, K);
+- else if (!phase_div_en)
+- return mash_dsm(pll, M, N, K);
+- else
+- return ssff_dsm_2(pll, M, N, K);
+-}
+-
+-static inline unsigned int ltq_get_pll0_fosc(void)
+-{
+- if (CGU_PLL0_BYPASS)
+- return get_input_clock(0);
+- else
+- return !CGU_PLL0_CFG_FRAC_EN
+- ? dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, 0,
+- CGU_PLL0_CFG_DSMSEL,
+- CGU_PLL0_PHASE_DIVIDER_ENABLE)
+- : dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN,
+- CGU_PLL0_CFG_PLLK, CGU_PLL0_CFG_DSMSEL,
+- CGU_PLL0_PHASE_DIVIDER_ENABLE);
+-}
+-
+-static unsigned int ltq_get_pll0_fdiv(void)
+-{
+- unsigned int div = CGU_PLL2_CFG_INPUT_DIV + 1;
+-
+- return (ltq_get_pll0_fosc() + (div >> 1)) / div;
+-}
+-
+-unsigned int ltq_get_io_region_clock(void)
+-{
+- unsigned int ret = ltq_get_pll0_fosc();
+-
+- switch (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & CGU_SYS_DDR_SEL) {
+- default:
+- case 0:
+- return (ret + 1) / 2;
+- case 1:
+- return (ret * 2 + 2) / 5;
+- case 2:
+- return (ret + 1) / 3;
+- case 3:
+- return (ret + 2) / 4;
+- }
+-}
+-EXPORT_SYMBOL(ltq_get_io_region_clock);
+-
+-unsigned int ltq_get_fpi_bus_clock(int fpi)
+-{
+- unsigned int ret = ltq_get_io_region_clock();
+-
+- if ((fpi == 2) && (ltq_cgu_r32(LTQ_CGU_SYS) & CGU_SYS_FPI_SEL))
+- ret >>= 1;
+- return ret;
+-}
+-EXPORT_SYMBOL(ltq_get_fpi_bus_clock);
+-
+-unsigned int ltq_get_cpu_hz(void)
+-{
+- switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0xc) {
+- case 0:
+- return CLOCK_333M;
+- case 4:
+- return DDR_HZ;
+- case 8:
+- return DDR_HZ << 1;
+- default:
+- return DDR_HZ >> 1;
+- }
+-}
+-EXPORT_SYMBOL(ltq_get_cpu_hz);
+-
+-unsigned int ltq_get_fpi_hz(void)
+-{
+- unsigned int ddr_clock = DDR_HZ;
+-
+- if (ltq_cgu_r32(LTQ_CGU_SYS) & 0x40)
+- return ddr_clock >> 1;
+- return ddr_clock;
+-}
+-EXPORT_SYMBOL(ltq_get_fpi_hz);
+diff --git a/arch/mips/lantiq/xway/clk.c b/arch/mips/lantiq/xway/clk.c
+new file mode 100644
+index 0000000..f3b50fc
+--- /dev/null
++++ b/arch/mips/lantiq/xway/clk.c
+@@ -0,0 +1,227 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/io.h>
++#include <linux/export.h>
++#include <linux/init.h>
++#include <linux/clk.h>
++
++#include <asm/time.h>
++#include <asm/irq.h>
++#include <asm/div64.h>
++
++#include <lantiq_soc.h>
++
++#include "../clk.h"
++
++static unsigned int ltq_ram_clocks[] = {
++ CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M };
++#define DDR_HZ ltq_ram_clocks[ltq_cgu_r32(LTQ_CGU_SYS) & 0x3]
++
++#define BASIC_FREQUENCY_1 35328000
++#define BASIC_FREQUENCY_2 36000000
++#define BASIS_REQUENCY_USB 12000000
++
++#define GET_BITS(x, msb, lsb) \
++ (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
++
++/* legacy xway clock */
++#define LTQ_CGU_PLL0_CFG 0x0004
++#define LTQ_CGU_PLL1_CFG 0x0008
++#define LTQ_CGU_PLL2_CFG 0x000C
++#define LTQ_CGU_SYS 0x0010
++#define LTQ_CGU_UPDATE 0x0014
++#define LTQ_CGU_IF_CLK 0x0018
++#define LTQ_CGU_OSC_CON 0x001C
++#define LTQ_CGU_SMD 0x0020
++#define LTQ_CGU_CT1SR 0x0028
++#define LTQ_CGU_CT2SR 0x002C
++#define LTQ_CGU_PCMCR 0x0030
++#define LTQ_CGU_PCI_CR 0x0034
++#define LTQ_CGU_PD_PC 0x0038
++#define LTQ_CGU_FMR 0x003C
++
++#define CGU_PLL0_PHASE_DIVIDER_ENABLE \
++ (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 31))
++#define CGU_PLL0_BYPASS \
++ (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 30))
++#define CGU_PLL0_CFG_DSMSEL \
++ (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 28))
++#define CGU_PLL0_CFG_FRAC_EN \
++ (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 27))
++#define CGU_PLL1_SRC \
++ (ltq_cgu_r32(LTQ_CGU_PLL1_CFG) & (1 << 31))
++#define CGU_PLL2_PHASE_DIVIDER_ENABLE \
++ (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & (1 << 20))
++#define CGU_SYS_FPI_SEL (1 << 6)
++#define CGU_SYS_DDR_SEL 0x3
++#define CGU_PLL0_SRC (1 << 29)
++
++#define CGU_PLL0_CFG_PLLK GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 26, 17)
++#define CGU_PLL0_CFG_PLLN GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 12, 6)
++#define CGU_PLL0_CFG_PLLM GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 5, 2)
++#define CGU_PLL2_SRC GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 18, 17)
++#define CGU_PLL2_CFG_INPUT_DIV GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 16, 13)
++
++/* vr9 clock */
++#define LTQ_CGU_SYS_VR9 0x0c
++#define LTQ_CGU_IF_CLK_VR9 0x24
++
++
++static unsigned int ltq_get_pll0_fdiv(void);
++
++static inline unsigned int get_input_clock(int pll)
++{
++ switch (pll) {
++ case 0:
++ if (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & CGU_PLL0_SRC)
++ return BASIS_REQUENCY_USB;
++ else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
++ return BASIC_FREQUENCY_1;
++ else
++ return BASIC_FREQUENCY_2;
++ case 1:
++ if (CGU_PLL1_SRC)
++ return BASIS_REQUENCY_USB;
++ else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
++ return BASIC_FREQUENCY_1;
++ else
++ return BASIC_FREQUENCY_2;
++ case 2:
++ switch (CGU_PLL2_SRC) {
++ case 0:
++ return ltq_get_pll0_fdiv();
++ case 1:
++ return CGU_PLL2_PHASE_DIVIDER_ENABLE ?
++ BASIC_FREQUENCY_1 :
++ BASIC_FREQUENCY_2;
++ case 2:
++ return BASIS_REQUENCY_USB;
++ }
++ default:
++ return 0;
++ }
++}
++
++static inline unsigned int cal_dsm(int pll, unsigned int num, unsigned int den)
++{
++ u64 res, clock = get_input_clock(pll);
++
++ res = num * clock;
++ do_div(res, den);
++ return res;
++}
++
++static inline unsigned int mash_dsm(int pll, unsigned int M, unsigned int N,
++ unsigned int K)
++{
++ unsigned int num = ((N + 1) << 10) + K;
++ unsigned int den = (M + 1) << 10;
++
++ return cal_dsm(pll, num, den);
++}
++
++static inline unsigned int ssff_dsm_1(int pll, unsigned int M, unsigned int N,
++ unsigned int K)
++{
++ unsigned int num = ((N + 1) << 11) + K + 512;
++ unsigned int den = (M + 1) << 11;
++
++ return cal_dsm(pll, num, den);
++}
++
++static inline unsigned int ssff_dsm_2(int pll, unsigned int M, unsigned int N,
++ unsigned int K)
++{
++ unsigned int num = K >= 512 ?
++ ((N + 1) << 12) + K - 512 : ((N + 1) << 12) + K + 3584;
++ unsigned int den = (M + 1) << 12;
++
++ return cal_dsm(pll, num, den);
++}
++
++static inline unsigned int dsm(int pll, unsigned int M, unsigned int N,
++ unsigned int K, unsigned int dsmsel, unsigned int phase_div_en)
++{
++ if (!dsmsel)
++ return mash_dsm(pll, M, N, K);
++ else if (!phase_div_en)
++ return mash_dsm(pll, M, N, K);
++ else
++ return ssff_dsm_2(pll, M, N, K);
++}
++
++static inline unsigned int ltq_get_pll0_fosc(void)
++{
++ if (CGU_PLL0_BYPASS)
++ return get_input_clock(0);
++ else
++ return !CGU_PLL0_CFG_FRAC_EN
++ ? dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, 0,
++ CGU_PLL0_CFG_DSMSEL,
++ CGU_PLL0_PHASE_DIVIDER_ENABLE)
++ : dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN,
++ CGU_PLL0_CFG_PLLK, CGU_PLL0_CFG_DSMSEL,
++ CGU_PLL0_PHASE_DIVIDER_ENABLE);
++}
++
++static unsigned int ltq_get_pll0_fdiv(void)
++{
++ unsigned int div = CGU_PLL2_CFG_INPUT_DIV + 1;
++
++ return (ltq_get_pll0_fosc() + (div >> 1)) / div;
++}
++
++unsigned long ltq_danube_io_region_clock(void)
++{
++ unsigned int ret = ltq_get_pll0_fosc();
++
++ switch (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & CGU_SYS_DDR_SEL) {
++ default:
++ case 0:
++ return (ret + 1) / 2;
++ case 1:
++ return (ret * 2 + 2) / 5;
++ case 2:
++ return (ret + 1) / 3;
++ case 3:
++ return (ret + 2) / 4;
++ }
++}
++
++unsigned long ltq_danube_fpi_bus_clock(int fpi)
++{
++ unsigned long ret = ltq_danube_io_region_clock();
++
++ if ((fpi == 2) && (ltq_cgu_r32(LTQ_CGU_SYS) & CGU_SYS_FPI_SEL))
++ ret >>= 1;
++ return ret;
++}
++
++unsigned long ltq_danube_cpu_hz(void)
++{
++ switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0xc) {
++ case 0:
++ return CLOCK_333M;
++ case 4:
++ return DDR_HZ;
++ case 8:
++ return DDR_HZ << 1;
++ default:
++ return DDR_HZ >> 1;
++ }
++}
++
++unsigned long ltq_danube_fpi_hz(void)
++{
++ unsigned long ddr_clock = DDR_HZ;
++
++ if (ltq_cgu_r32(LTQ_CGU_SYS) & 0x40)
++ return ddr_clock >> 1;
++ return ddr_clock;
++}
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+index 8fd13a1..c5782b5 100644
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -8,17 +8,48 @@
+
+ #include <linux/ioport.h>
+ #include <linux/export.h>
++#include <linux/clkdev.h>
+
+ #include <lantiq_soc.h>
+
++#include "../clk.h"
+ #include "../devices.h"
+
+ /* clock control register */
+ #define LTQ_CGU_IFCCR 0x0018
++/* system clock register */
++#define LTQ_CGU_SYS 0x0010
+
+ /* the enable / disable registers */
+ #define LTQ_PMU_PWDCR 0x1C
+ #define LTQ_PMU_PWDSR 0x20
++#define LTQ_PMU_PWDCR1 0x24
++#define LTQ_PMU_PWDSR1 0x28
++
++#define PWDCR(x) ((x) ? (LTQ_PMU_PWDCR1) : (LTQ_PMU_PWDCR))
++#define PWDSR(x) ((x) ? (LTQ_PMU_PWDSR1) : (LTQ_PMU_PWDSR))
++
++/* CGU - clock generation unit */
++#define CGU_EPHY 0x10
++
++/* PMU - power management unit */
++#define PMU_DMA 0x0020
++#define PMU_SPI 0x0100
++#define PMU_EPHY 0x0080
++#define PMU_USB 0x8041
++#define PMU_STP 0x0800
++#define PMU_GPT 0x1000
++#define PMU_PPE 0x2000
++#define PMU_FPI 0x4000
++#define PMU_SWITCH 0x10000000
++#define PMU_AHBS 0x2000
++#define PMU_AHBM 0x8000
++#define PMU_PCIE_CLK 0x80000000
++
++#define PMU1_PCIE_PHY 0x0001
++#define PMU1_PCIE_CTL 0x0002
++#define PMU1_PCIE_MSI 0x0020
++#define PMU1_PCIE_PDI 0x0010
+
+ #define ltq_pmu_w32(x, y) ltq_w32((x), ltq_pmu_membase + (y))
+ #define ltq_pmu_r32(x) ltq_r32(ltq_pmu_membase + (x))
+@@ -36,28 +67,64 @@ void __iomem *ltq_cgu_membase;
+ void __iomem *ltq_ebu_membase;
+ static void __iomem *ltq_pmu_membase;
+
+-void ltq_cgu_enable(unsigned int clk)
++static int ltq_cgu_enable(struct clk *clk)
+ {
+- ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | clk, LTQ_CGU_IFCCR);
++ ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | clk->bits, LTQ_CGU_IFCCR);
++ return 0;
+ }
+
+-void ltq_pmu_enable(unsigned int module)
++static void ltq_cgu_disable(struct clk *clk)
++{
++ ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~clk->bits, LTQ_CGU_IFCCR);
++}
++
++static int ltq_pmu_enable(struct clk *clk)
+ {
+ int err = 1000000;
+
+- ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) & ~module, LTQ_PMU_PWDCR);
+- do {} while (--err && (ltq_pmu_r32(LTQ_PMU_PWDSR) & module));
++ ltq_pmu_w32(ltq_pmu_r32(PWDCR(clk->module)) & ~clk->bits,
++ PWDCR(clk->module));
++ do {} while (--err && (ltq_pmu_r32(PWDSR(clk->module)) & clk->bits));
+
+ if (!err)
+ panic("activating PMU module failed!\n");
++
++ return 0;
+ }
+-EXPORT_SYMBOL(ltq_pmu_enable);
+
+-void ltq_pmu_disable(unsigned int module)
++static void ltq_pmu_disable(struct clk *clk)
+ {
+- ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) | module, LTQ_PMU_PWDCR);
++ ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) | clk->bits, LTQ_PMU_PWDCR);
++}
++
++static inline void clkdev_add_pmu(const char *dev, const char *con,
++ unsigned int module, unsigned int bits)
++{
++ struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
++
++ clk->cl.dev_id = dev;
++ clk->cl.con_id = con;
++ clk->cl.clk = clk;
++ clk->enable = ltq_pmu_enable;
++ clk->disable = ltq_pmu_disable;
++ clk->module = module;
++ clk->bits = bits;
++ clkdev_add(&clk->cl);
++}
++
++static inline void clkdev_add_cgu(const char *dev, const char *con,
++ unsigned int bits)
++{
++ struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
++
++ clk->cl.dev_id = dev;
++ clk->cl.con_id = con;
++ clk->cl.clk = clk;
++ clk->enable = ltq_cgu_enable;
++ clk->disable = ltq_cgu_disable;
++ clk->bits = bits;
++ clkdev_add(&clk->cl);
+ }
+-EXPORT_SYMBOL(ltq_pmu_disable);
+
+ void __init ltq_soc_init(void)
+ {
+@@ -75,4 +142,23 @@ void __init ltq_soc_init(void)
+
+ /* make sure to unprotect the memory region where flash is located */
+ ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0);
++
++ /* add our clocks */
++ clkdev_add_pmu("ltq_dma", NULL, 0, PMU_DMA);
++ clkdev_add_pmu("ltq_stp", NULL, 0, PMU_STP);
++ clkdev_add_pmu("ltq_spi", NULL, 0, PMU_SPI);
++ clkdev_add_pmu("ltq_etop", NULL, 0, PMU_PPE);
++ if (ltq_is_ase()) {
++ if (ltq_cgu_r32(LTQ_CGU_SYS) & (1 << 5))
++ clkdev_add_static(CLOCK_266M, CLOCK_133M, CLOCK_133M);
++ else
++ clkdev_add_static(CLOCK_133M, CLOCK_133M, CLOCK_133M);
++ clkdev_add_cgu("ltq_etop", "ephycgu", CGU_EPHY),
++ clkdev_add_pmu("ltq_etop", "ephy", 0, PMU_EPHY);
++ } else {
++ clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
++ ltq_danube_io_region_clock());
++ if (ltq_is_ar9())
++ clkdev_add_pmu("ltq_etop", "switch", 0, PMU_SWITCH);
++ }
+ }
+--
+1.7.9.1
+
--- /dev/null
+From 3a20e2b3471baf86765747b0e194400d3d74b6d8 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 11:19:11 +0100
+Subject: [PATCH 26/73] MIPS: lantiq: convert falcon to clkdev api
+
+Unify sysctrl/clock code and add clkdev hooks to sysctrl.c
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ .../include/asm/mach-lantiq/falcon/lantiq_soc.h | 8 +-
+ arch/mips/lantiq/falcon/Makefile | 2 +-
+ arch/mips/lantiq/falcon/sysctrl.c | 129 ++++++++++++--------
+ 3 files changed, 80 insertions(+), 59 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+index 0aa1f16..120c56c 100644
+--- a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+@@ -95,6 +95,7 @@
+
+ /* Activation Status Register */
+ #define ACTS_ASC1_ACT 0x00000800
++#define ACTS_I2C_ACT 0x00004000
+ #define ACTS_P0 0x00010000
+ #define ACTS_P1 0x00010000
+ #define ACTS_P2 0x00020000
+@@ -106,13 +107,6 @@
+ #define ACTS_PADCTRL3 0x00200000
+ #define ACTS_PADCTRL4 0x00400000
+
+-extern void ltq_sysctl_activate(int module, unsigned int mask);
+-extern void ltq_sysctl_deactivate(int module, unsigned int mask);
+-extern void ltq_sysctl_clken(int module, unsigned int mask);
+-extern void ltq_sysctl_clkdis(int module, unsigned int mask);
+-extern void ltq_sysctl_reboot(int module, unsigned int mask);
+-extern int ltq_gpe_is_activated(unsigned int mask);
+-
+ /* global register ranges */
+ extern __iomem void *ltq_ebu_membase;
+ extern __iomem void *ltq_sys1_membase;
+diff --git a/arch/mips/lantiq/falcon/Makefile b/arch/mips/lantiq/falcon/Makefile
+index 56b22eb..3634154 100644
+--- a/arch/mips/lantiq/falcon/Makefile
++++ b/arch/mips/lantiq/falcon/Makefile
+@@ -1,2 +1,2 @@
+-obj-y := clk.o prom.o reset.o sysctrl.o devices.o gpio.o
++obj-y := prom.o reset.o sysctrl.o devices.o gpio.o
+ obj-$(CONFIG_LANTIQ_MACH_EASY98000) += mach-easy98000.o
+diff --git a/arch/mips/lantiq/falcon/sysctrl.c b/arch/mips/lantiq/falcon/sysctrl.c
+index 905a142..900f0e5 100644
+--- a/arch/mips/lantiq/falcon/sysctrl.c
++++ b/arch/mips/lantiq/falcon/sysctrl.c
+@@ -9,11 +9,13 @@
+
+ #include <linux/ioport.h>
+ #include <linux/export.h>
++#include <linux/clkdev.h>
+ #include <asm/delay.h>
+
+ #include <lantiq_soc.h>
+
+ #include "devices.h"
++#include "../clk.h"
+
+ /* infrastructure control register */
+ #define SYS1_INFRAC 0x00bc
+@@ -38,6 +40,10 @@
+ #define LTQ_SYSCTL_DEACT 0x0028
+ /* reboot Register */
+ #define LTQ_SYSCTL_RBT 0x002c
++/* CPU0 Clock Control Register */
++#define LTQ_SYS1_CPU0CC 0x0040
++/* clock divider bit */
++#define LTQ_CPU0CC_CPUDIV 0x0001
+
+ static struct resource ltq_sysctl_res[] = {
+ MEM_RES("sys1", LTQ_SYS1_BASE_ADDR, LTQ_SYS1_SIZE),
+@@ -64,79 +70,67 @@ void __iomem *ltq_ebu_membase;
+ #define ltq_status_r32(x) ltq_r32(ltq_status_membase + (x))
+
+ static inline void
+-ltq_sysctl_wait(int module, unsigned int mask,
++ltq_sysctl_wait(struct clk *clk,
+ unsigned int test, unsigned int reg)
+ {
+ int err = 1000000;
+
+- do {} while (--err && ((ltq_reg_r32(module, reg)
+- & mask) != test));
++ do {} while (--err && ((ltq_reg_r32(clk->module, reg)
++ & clk->bits) != test));
+ if (!err)
+- pr_err("module de/activation failed %d %08X %08X\n",
+- module, mask, test);
++ pr_err("module de/activation failed %d %08X %08X %08X\n",
++ clk->module, clk->bits, test,
++ ltq_reg_r32(clk->module, reg) & clk->bits);
+ }
+
+-void
+-ltq_sysctl_activate(int module, unsigned int mask)
++static int
++ltq_sysctl_activate(struct clk *clk)
+ {
+- if (module > SYSCTL_SYSGPE)
+- return;
+-
+- ltq_reg_w32(module, mask, LTQ_SYSCTL_CLKEN);
+- ltq_reg_w32(module, mask, LTQ_SYSCTL_ACT);
+- ltq_sysctl_wait(module, mask, mask, LTQ_SYSCTL_ACTS);
++ ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_CLKEN);
++ ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_ACT);
++ ltq_sysctl_wait(clk, clk->bits, LTQ_SYSCTL_ACTS);
++ return 0;
+ }
+-EXPORT_SYMBOL(ltq_sysctl_activate);
+
+-void
+-ltq_sysctl_deactivate(int module, unsigned int mask)
++static void
++ltq_sysctl_deactivate(struct clk *clk)
+ {
+- if (module > SYSCTL_SYSGPE)
+- return;
+-
+- ltq_reg_w32(module, mask, LTQ_SYSCTL_CLKCLR);
+- ltq_reg_w32(module, mask, LTQ_SYSCTL_DEACT);
+- ltq_sysctl_wait(module, mask, 0, LTQ_SYSCTL_ACTS);
++ ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_CLKCLR);
++ ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_DEACT);
++ ltq_sysctl_wait(clk, 0, LTQ_SYSCTL_ACTS);
+ }
+-EXPORT_SYMBOL(ltq_sysctl_deactivate);
+
+-void
+-ltq_sysctl_clken(int module, unsigned int mask)
++static int
++ltq_sysctl_clken(struct clk *clk)
+ {
+- if (module > SYSCTL_SYSGPE)
+- return;
+-
+- ltq_reg_w32(module, mask, LTQ_SYSCTL_CLKEN);
+- ltq_sysctl_wait(module, mask, mask, LTQ_SYSCTL_CLKS);
++ ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_CLKEN);
++ ltq_sysctl_wait(clk, clk->bits, LTQ_SYSCTL_CLKS);
++ return 0;
+ }
+-EXPORT_SYMBOL(ltq_sysctl_clken);
+
+-void
+-ltq_sysctl_clkdis(int module, unsigned int mask)
++static void
++ltq_sysctl_clkdis(struct clk *clk)
+ {
+- if (module > SYSCTL_SYSGPE)
+- return;
+-
+- ltq_reg_w32(module, mask, LTQ_SYSCTL_CLKCLR);
+- ltq_sysctl_wait(module, mask, 0, LTQ_SYSCTL_CLKS);
++ ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_CLKCLR);
++ ltq_sysctl_wait(clk, 0, LTQ_SYSCTL_CLKS);
+ }
+-EXPORT_SYMBOL(ltq_sysctl_clkdis);
+
+-void
+-ltq_sysctl_reboot(int module, unsigned int mask)
++static void
++ltq_sysctl_reboot(struct clk *clk)
+ {
+ unsigned int act;
+-
+- if (module > SYSCTL_SYSGPE)
+- return;
+-
+- act = ltq_reg_r32(module, LTQ_SYSCTL_ACT);
+- if ((~act & mask) != 0)
+- ltq_sysctl_activate(module, ~act & mask);
+- ltq_reg_w32(module, act & mask, LTQ_SYSCTL_RBT);
+- ltq_sysctl_wait(module, mask, mask, LTQ_SYSCTL_ACTS);
++ unsigned int bits;
++
++ act = ltq_reg_r32(clk->module, LTQ_SYSCTL_ACT);
++ bits = ~act & clk->bits;
++ if (bits != 0) {
++ ltq_reg_w32(clk->module, bits, LTQ_SYSCTL_CLKEN);
++ ltq_reg_w32(clk->module, bits, LTQ_SYSCTL_ACT);
++ ltq_sysctl_wait(clk, bits, LTQ_SYSCTL_ACTS);
++ }
++ ltq_reg_w32(clk->module, act & clk->bits, LTQ_SYSCTL_RBT);
++ ltq_sysctl_wait(clk, clk->bits, LTQ_SYSCTL_ACTS);
+ }
+-EXPORT_SYMBOL(ltq_sysctl_reboot);
+
+ /* enable the ONU core */
+ static void
+@@ -167,6 +161,24 @@ ltq_gpe_enable(void)
+ udelay(1);
+ }
+
++static inline void
++clkdev_add_sys(const char *dev, unsigned int module,
++ unsigned int bits)
++{
++ struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
++
++ clk->cl.dev_id = dev;
++ clk->cl.con_id = NULL;
++ clk->cl.clk = clk;
++ clk->module = module;
++ clk->activate = ltq_sysctl_activate;
++ clk->deactivate = ltq_sysctl_deactivate;
++ clk->enable = ltq_sysctl_clken;
++ clk->disable = ltq_sysctl_clkdis;
++ clk->reboot = ltq_sysctl_reboot;
++ clkdev_add(&clk->cl);
++}
++
+ void __init
+ ltq_soc_init(void)
+ {
+@@ -180,4 +192,19 @@ ltq_soc_init(void)
+ ltq_ebu_membase = ltq_remap_resource(<q_ebu_res);
+
+ ltq_gpe_enable();
++
++ /* get our 3 static rates for cpu, fpi and io clocks */
++ if (ltq_sys1_r32(LTQ_SYS1_CPU0CC) & LTQ_CPU0CC_CPUDIV)
++ clkdev_add_static(CLOCK_200M, CLOCK_100M, CLOCK_200M);
++ else
++ clkdev_add_static(CLOCK_400M, CLOCK_100M, CLOCK_200M);
++
++ /* add our clock domains */
++ clkdev_add_sys("falcon_gpio.0", SYSCTL_SYSETH, ACTS_PADCTRL0 | ACTS_P0);
++ clkdev_add_sys("falcon_gpio.1", SYSCTL_SYS1, ACTS_PADCTRL1 | ACTS_P1);
++ clkdev_add_sys("falcon_gpio.2", SYSCTL_SYSETH, ACTS_PADCTRL2 | ACTS_P2);
++ clkdev_add_sys("falcon_gpio.3", SYSCTL_SYS1, ACTS_PADCTRL3 | ACTS_P3);
++ clkdev_add_sys("falcon_gpio.4", SYSCTL_SYS1, ACTS_PADCTRL4 | ACTS_P4);
++ clkdev_add_sys("ltq_asc.1", SYSCTL_SYS1, ACTS_ASC1_ACT);
++ clkdev_add_sys("falcon_i2c", SYSCTL_SYS1, ACTS_I2C_ACT);
+ }
+--
+1.7.9.1
+
+++ /dev/null
-From 418e330dc60aaabdb5cf4509ec08cce07d63f32e Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 8 Mar 2012 11:18:22 +0100
-Subject: [PATCH 26/70] MIPS: lantiq: convert xway to clkdev api
-
-Unify xway/ase clock code and add clkdev hooks to sysctrl.c
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 13 --
- arch/mips/lantiq/xway/Makefile | 6 +-
- arch/mips/lantiq/xway/clk-ase.c | 48 ----
- arch/mips/lantiq/xway/clk-xway.c | 223 -------------------
- arch/mips/lantiq/xway/clk.c | 227 ++++++++++++++++++++
- arch/mips/lantiq/xway/sysctrl.c | 104 ++++++++-
- 6 files changed, 325 insertions(+), 296 deletions(-)
- delete mode 100644 arch/mips/lantiq/xway/clk-ase.c
- delete mode 100644 arch/mips/lantiq/xway/clk-xway.c
- create mode 100644 arch/mips/lantiq/xway/clk.c
-
---- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-@@ -81,15 +81,6 @@
- #define LTQ_PMU_BASE_ADDR 0x1F102000
- #define LTQ_PMU_SIZE 0x1000
-
--#define PMU_DMA 0x0020
--#define PMU_EPHY 0x0080
--#define PMU_USB 0x8041
--#define PMU_LED 0x0800
--#define PMU_GPT 0x1000
--#define PMU_PPE 0x2000
--#define PMU_FPI 0x4000
--#define PMU_SWITCH 0x10000000
--
- /* ETOP - ethernet */
- #define LTQ_ETOP_BASE_ADDR 0x1E180000
- #define LTQ_ETOP_SIZE 0x40000
-@@ -145,10 +136,6 @@
- extern __iomem void *ltq_ebu_membase;
- extern __iomem void *ltq_cgu_membase;
-
--extern void ltq_pmu_enable(unsigned int module);
--extern void ltq_pmu_disable(unsigned int module);
--extern void ltq_cgu_enable(unsigned int clk);
--
- static inline int ltq_is_ase(void)
- {
- return (ltq_get_soc_type() == SOC_TYPE_AMAZON_SE);
---- a/arch/mips/lantiq/xway/Makefile
-+++ b/arch/mips/lantiq/xway/Makefile
-@@ -1,7 +1,7 @@
--obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o
-+obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o
-
--obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o
--obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o
-+obj-$(CONFIG_SOC_XWAY) += prom-xway.o
-+obj-$(CONFIG_SOC_AMAZON_SE) += prom-ase.o
-
- obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
- obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
---- a/arch/mips/lantiq/xway/clk-ase.c
-+++ /dev/null
-@@ -1,48 +0,0 @@
--/*
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- *
-- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
-- */
--
--#include <linux/io.h>
--#include <linux/export.h>
--#include <linux/init.h>
--#include <linux/clk.h>
--
--#include <asm/time.h>
--#include <asm/irq.h>
--#include <asm/div64.h>
--
--#include <lantiq_soc.h>
--
--/* cgu registers */
--#define LTQ_CGU_SYS 0x0010
--
--unsigned int ltq_get_io_region_clock(void)
--{
-- return CLOCK_133M;
--}
--EXPORT_SYMBOL(ltq_get_io_region_clock);
--
--unsigned int ltq_get_fpi_bus_clock(int fpi)
--{
-- return CLOCK_133M;
--}
--EXPORT_SYMBOL(ltq_get_fpi_bus_clock);
--
--unsigned int ltq_get_cpu_hz(void)
--{
-- if (ltq_cgu_r32(LTQ_CGU_SYS) & (1 << 5))
-- return CLOCK_266M;
-- else
-- return CLOCK_133M;
--}
--EXPORT_SYMBOL(ltq_get_cpu_hz);
--
--unsigned int ltq_get_fpi_hz(void)
--{
-- return CLOCK_133M;
--}
--EXPORT_SYMBOL(ltq_get_fpi_hz);
---- a/arch/mips/lantiq/xway/clk-xway.c
-+++ /dev/null
-@@ -1,223 +0,0 @@
--/*
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- *
-- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
-- */
--
--#include <linux/io.h>
--#include <linux/export.h>
--#include <linux/init.h>
--#include <linux/clk.h>
--
--#include <asm/time.h>
--#include <asm/irq.h>
--#include <asm/div64.h>
--
--#include <lantiq_soc.h>
--
--static unsigned int ltq_ram_clocks[] = {
-- CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M };
--#define DDR_HZ ltq_ram_clocks[ltq_cgu_r32(LTQ_CGU_SYS) & 0x3]
--
--#define BASIC_FREQUENCY_1 35328000
--#define BASIC_FREQUENCY_2 36000000
--#define BASIS_REQUENCY_USB 12000000
--
--#define GET_BITS(x, msb, lsb) \
-- (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
--
--#define LTQ_CGU_PLL0_CFG 0x0004
--#define LTQ_CGU_PLL1_CFG 0x0008
--#define LTQ_CGU_PLL2_CFG 0x000C
--#define LTQ_CGU_SYS 0x0010
--#define LTQ_CGU_UPDATE 0x0014
--#define LTQ_CGU_IF_CLK 0x0018
--#define LTQ_CGU_OSC_CON 0x001C
--#define LTQ_CGU_SMD 0x0020
--#define LTQ_CGU_CT1SR 0x0028
--#define LTQ_CGU_CT2SR 0x002C
--#define LTQ_CGU_PCMCR 0x0030
--#define LTQ_CGU_PCI_CR 0x0034
--#define LTQ_CGU_PD_PC 0x0038
--#define LTQ_CGU_FMR 0x003C
--
--#define CGU_PLL0_PHASE_DIVIDER_ENABLE \
-- (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 31))
--#define CGU_PLL0_BYPASS \
-- (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 30))
--#define CGU_PLL0_CFG_DSMSEL \
-- (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 28))
--#define CGU_PLL0_CFG_FRAC_EN \
-- (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 27))
--#define CGU_PLL1_SRC \
-- (ltq_cgu_r32(LTQ_CGU_PLL1_CFG) & (1 << 31))
--#define CGU_PLL2_PHASE_DIVIDER_ENABLE \
-- (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & (1 << 20))
--#define CGU_SYS_FPI_SEL (1 << 6)
--#define CGU_SYS_DDR_SEL 0x3
--#define CGU_PLL0_SRC (1 << 29)
--
--#define CGU_PLL0_CFG_PLLK GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 26, 17)
--#define CGU_PLL0_CFG_PLLN GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 12, 6)
--#define CGU_PLL0_CFG_PLLM GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 5, 2)
--#define CGU_PLL2_SRC GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 18, 17)
--#define CGU_PLL2_CFG_INPUT_DIV GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 16, 13)
--
--static unsigned int ltq_get_pll0_fdiv(void);
--
--static inline unsigned int get_input_clock(int pll)
--{
-- switch (pll) {
-- case 0:
-- if (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & CGU_PLL0_SRC)
-- return BASIS_REQUENCY_USB;
-- else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
-- return BASIC_FREQUENCY_1;
-- else
-- return BASIC_FREQUENCY_2;
-- case 1:
-- if (CGU_PLL1_SRC)
-- return BASIS_REQUENCY_USB;
-- else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
-- return BASIC_FREQUENCY_1;
-- else
-- return BASIC_FREQUENCY_2;
-- case 2:
-- switch (CGU_PLL2_SRC) {
-- case 0:
-- return ltq_get_pll0_fdiv();
-- case 1:
-- return CGU_PLL2_PHASE_DIVIDER_ENABLE ?
-- BASIC_FREQUENCY_1 :
-- BASIC_FREQUENCY_2;
-- case 2:
-- return BASIS_REQUENCY_USB;
-- }
-- default:
-- return 0;
-- }
--}
--
--static inline unsigned int cal_dsm(int pll, unsigned int num, unsigned int den)
--{
-- u64 res, clock = get_input_clock(pll);
--
-- res = num * clock;
-- do_div(res, den);
-- return res;
--}
--
--static inline unsigned int mash_dsm(int pll, unsigned int M, unsigned int N,
-- unsigned int K)
--{
-- unsigned int num = ((N + 1) << 10) + K;
-- unsigned int den = (M + 1) << 10;
--
-- return cal_dsm(pll, num, den);
--}
--
--static inline unsigned int ssff_dsm_1(int pll, unsigned int M, unsigned int N,
-- unsigned int K)
--{
-- unsigned int num = ((N + 1) << 11) + K + 512;
-- unsigned int den = (M + 1) << 11;
--
-- return cal_dsm(pll, num, den);
--}
--
--static inline unsigned int ssff_dsm_2(int pll, unsigned int M, unsigned int N,
-- unsigned int K)
--{
-- unsigned int num = K >= 512 ?
-- ((N + 1) << 12) + K - 512 : ((N + 1) << 12) + K + 3584;
-- unsigned int den = (M + 1) << 12;
--
-- return cal_dsm(pll, num, den);
--}
--
--static inline unsigned int dsm(int pll, unsigned int M, unsigned int N,
-- unsigned int K, unsigned int dsmsel, unsigned int phase_div_en)
--{
-- if (!dsmsel)
-- return mash_dsm(pll, M, N, K);
-- else if (!phase_div_en)
-- return mash_dsm(pll, M, N, K);
-- else
-- return ssff_dsm_2(pll, M, N, K);
--}
--
--static inline unsigned int ltq_get_pll0_fosc(void)
--{
-- if (CGU_PLL0_BYPASS)
-- return get_input_clock(0);
-- else
-- return !CGU_PLL0_CFG_FRAC_EN
-- ? dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, 0,
-- CGU_PLL0_CFG_DSMSEL,
-- CGU_PLL0_PHASE_DIVIDER_ENABLE)
-- : dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN,
-- CGU_PLL0_CFG_PLLK, CGU_PLL0_CFG_DSMSEL,
-- CGU_PLL0_PHASE_DIVIDER_ENABLE);
--}
--
--static unsigned int ltq_get_pll0_fdiv(void)
--{
-- unsigned int div = CGU_PLL2_CFG_INPUT_DIV + 1;
--
-- return (ltq_get_pll0_fosc() + (div >> 1)) / div;
--}
--
--unsigned int ltq_get_io_region_clock(void)
--{
-- unsigned int ret = ltq_get_pll0_fosc();
--
-- switch (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & CGU_SYS_DDR_SEL) {
-- default:
-- case 0:
-- return (ret + 1) / 2;
-- case 1:
-- return (ret * 2 + 2) / 5;
-- case 2:
-- return (ret + 1) / 3;
-- case 3:
-- return (ret + 2) / 4;
-- }
--}
--EXPORT_SYMBOL(ltq_get_io_region_clock);
--
--unsigned int ltq_get_fpi_bus_clock(int fpi)
--{
-- unsigned int ret = ltq_get_io_region_clock();
--
-- if ((fpi == 2) && (ltq_cgu_r32(LTQ_CGU_SYS) & CGU_SYS_FPI_SEL))
-- ret >>= 1;
-- return ret;
--}
--EXPORT_SYMBOL(ltq_get_fpi_bus_clock);
--
--unsigned int ltq_get_cpu_hz(void)
--{
-- switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0xc) {
-- case 0:
-- return CLOCK_333M;
-- case 4:
-- return DDR_HZ;
-- case 8:
-- return DDR_HZ << 1;
-- default:
-- return DDR_HZ >> 1;
-- }
--}
--EXPORT_SYMBOL(ltq_get_cpu_hz);
--
--unsigned int ltq_get_fpi_hz(void)
--{
-- unsigned int ddr_clock = DDR_HZ;
--
-- if (ltq_cgu_r32(LTQ_CGU_SYS) & 0x40)
-- return ddr_clock >> 1;
-- return ddr_clock;
--}
--EXPORT_SYMBOL(ltq_get_fpi_hz);
---- /dev/null
-+++ b/arch/mips/lantiq/xway/clk.c
-@@ -0,0 +1,227 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/io.h>
-+#include <linux/export.h>
-+#include <linux/init.h>
-+#include <linux/clk.h>
-+
-+#include <asm/time.h>
-+#include <asm/irq.h>
-+#include <asm/div64.h>
-+
-+#include <lantiq_soc.h>
-+
-+#include "../clk.h"
-+
-+static unsigned int ltq_ram_clocks[] = {
-+ CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M };
-+#define DDR_HZ ltq_ram_clocks[ltq_cgu_r32(LTQ_CGU_SYS) & 0x3]
-+
-+#define BASIC_FREQUENCY_1 35328000
-+#define BASIC_FREQUENCY_2 36000000
-+#define BASIS_REQUENCY_USB 12000000
-+
-+#define GET_BITS(x, msb, lsb) \
-+ (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
-+
-+/* legacy xway clock */
-+#define LTQ_CGU_PLL0_CFG 0x0004
-+#define LTQ_CGU_PLL1_CFG 0x0008
-+#define LTQ_CGU_PLL2_CFG 0x000C
-+#define LTQ_CGU_SYS 0x0010
-+#define LTQ_CGU_UPDATE 0x0014
-+#define LTQ_CGU_IF_CLK 0x0018
-+#define LTQ_CGU_OSC_CON 0x001C
-+#define LTQ_CGU_SMD 0x0020
-+#define LTQ_CGU_CT1SR 0x0028
-+#define LTQ_CGU_CT2SR 0x002C
-+#define LTQ_CGU_PCMCR 0x0030
-+#define LTQ_CGU_PCI_CR 0x0034
-+#define LTQ_CGU_PD_PC 0x0038
-+#define LTQ_CGU_FMR 0x003C
-+
-+#define CGU_PLL0_PHASE_DIVIDER_ENABLE \
-+ (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 31))
-+#define CGU_PLL0_BYPASS \
-+ (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 30))
-+#define CGU_PLL0_CFG_DSMSEL \
-+ (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 28))
-+#define CGU_PLL0_CFG_FRAC_EN \
-+ (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 27))
-+#define CGU_PLL1_SRC \
-+ (ltq_cgu_r32(LTQ_CGU_PLL1_CFG) & (1 << 31))
-+#define CGU_PLL2_PHASE_DIVIDER_ENABLE \
-+ (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & (1 << 20))
-+#define CGU_SYS_FPI_SEL (1 << 6)
-+#define CGU_SYS_DDR_SEL 0x3
-+#define CGU_PLL0_SRC (1 << 29)
-+
-+#define CGU_PLL0_CFG_PLLK GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 26, 17)
-+#define CGU_PLL0_CFG_PLLN GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 12, 6)
-+#define CGU_PLL0_CFG_PLLM GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 5, 2)
-+#define CGU_PLL2_SRC GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 18, 17)
-+#define CGU_PLL2_CFG_INPUT_DIV GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 16, 13)
-+
-+/* vr9 clock */
-+#define LTQ_CGU_SYS_VR9 0x0c
-+#define LTQ_CGU_IF_CLK_VR9 0x24
-+
-+
-+static unsigned int ltq_get_pll0_fdiv(void);
-+
-+static inline unsigned int get_input_clock(int pll)
-+{
-+ switch (pll) {
-+ case 0:
-+ if (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & CGU_PLL0_SRC)
-+ return BASIS_REQUENCY_USB;
-+ else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
-+ return BASIC_FREQUENCY_1;
-+ else
-+ return BASIC_FREQUENCY_2;
-+ case 1:
-+ if (CGU_PLL1_SRC)
-+ return BASIS_REQUENCY_USB;
-+ else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
-+ return BASIC_FREQUENCY_1;
-+ else
-+ return BASIC_FREQUENCY_2;
-+ case 2:
-+ switch (CGU_PLL2_SRC) {
-+ case 0:
-+ return ltq_get_pll0_fdiv();
-+ case 1:
-+ return CGU_PLL2_PHASE_DIVIDER_ENABLE ?
-+ BASIC_FREQUENCY_1 :
-+ BASIC_FREQUENCY_2;
-+ case 2:
-+ return BASIS_REQUENCY_USB;
-+ }
-+ default:
-+ return 0;
-+ }
-+}
-+
-+static inline unsigned int cal_dsm(int pll, unsigned int num, unsigned int den)
-+{
-+ u64 res, clock = get_input_clock(pll);
-+
-+ res = num * clock;
-+ do_div(res, den);
-+ return res;
-+}
-+
-+static inline unsigned int mash_dsm(int pll, unsigned int M, unsigned int N,
-+ unsigned int K)
-+{
-+ unsigned int num = ((N + 1) << 10) + K;
-+ unsigned int den = (M + 1) << 10;
-+
-+ return cal_dsm(pll, num, den);
-+}
-+
-+static inline unsigned int ssff_dsm_1(int pll, unsigned int M, unsigned int N,
-+ unsigned int K)
-+{
-+ unsigned int num = ((N + 1) << 11) + K + 512;
-+ unsigned int den = (M + 1) << 11;
-+
-+ return cal_dsm(pll, num, den);
-+}
-+
-+static inline unsigned int ssff_dsm_2(int pll, unsigned int M, unsigned int N,
-+ unsigned int K)
-+{
-+ unsigned int num = K >= 512 ?
-+ ((N + 1) << 12) + K - 512 : ((N + 1) << 12) + K + 3584;
-+ unsigned int den = (M + 1) << 12;
-+
-+ return cal_dsm(pll, num, den);
-+}
-+
-+static inline unsigned int dsm(int pll, unsigned int M, unsigned int N,
-+ unsigned int K, unsigned int dsmsel, unsigned int phase_div_en)
-+{
-+ if (!dsmsel)
-+ return mash_dsm(pll, M, N, K);
-+ else if (!phase_div_en)
-+ return mash_dsm(pll, M, N, K);
-+ else
-+ return ssff_dsm_2(pll, M, N, K);
-+}
-+
-+static inline unsigned int ltq_get_pll0_fosc(void)
-+{
-+ if (CGU_PLL0_BYPASS)
-+ return get_input_clock(0);
-+ else
-+ return !CGU_PLL0_CFG_FRAC_EN
-+ ? dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, 0,
-+ CGU_PLL0_CFG_DSMSEL,
-+ CGU_PLL0_PHASE_DIVIDER_ENABLE)
-+ : dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN,
-+ CGU_PLL0_CFG_PLLK, CGU_PLL0_CFG_DSMSEL,
-+ CGU_PLL0_PHASE_DIVIDER_ENABLE);
-+}
-+
-+static unsigned int ltq_get_pll0_fdiv(void)
-+{
-+ unsigned int div = CGU_PLL2_CFG_INPUT_DIV + 1;
-+
-+ return (ltq_get_pll0_fosc() + (div >> 1)) / div;
-+}
-+
-+unsigned long ltq_danube_io_region_clock(void)
-+{
-+ unsigned int ret = ltq_get_pll0_fosc();
-+
-+ switch (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & CGU_SYS_DDR_SEL) {
-+ default:
-+ case 0:
-+ return (ret + 1) / 2;
-+ case 1:
-+ return (ret * 2 + 2) / 5;
-+ case 2:
-+ return (ret + 1) / 3;
-+ case 3:
-+ return (ret + 2) / 4;
-+ }
-+}
-+
-+unsigned long ltq_danube_fpi_bus_clock(int fpi)
-+{
-+ unsigned long ret = ltq_danube_io_region_clock();
-+
-+ if ((fpi == 2) && (ltq_cgu_r32(LTQ_CGU_SYS) & CGU_SYS_FPI_SEL))
-+ ret >>= 1;
-+ return ret;
-+}
-+
-+unsigned long ltq_danube_cpu_hz(void)
-+{
-+ switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0xc) {
-+ case 0:
-+ return CLOCK_333M;
-+ case 4:
-+ return DDR_HZ;
-+ case 8:
-+ return DDR_HZ << 1;
-+ default:
-+ return DDR_HZ >> 1;
-+ }
-+}
-+
-+unsigned long ltq_danube_fpi_hz(void)
-+{
-+ unsigned long ddr_clock = DDR_HZ;
-+
-+ if (ltq_cgu_r32(LTQ_CGU_SYS) & 0x40)
-+ return ddr_clock >> 1;
-+ return ddr_clock;
-+}
---- a/arch/mips/lantiq/xway/sysctrl.c
-+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -8,17 +8,48 @@
-
- #include <linux/ioport.h>
- #include <linux/export.h>
-+#include <linux/clkdev.h>
-
- #include <lantiq_soc.h>
-
-+#include "../clk.h"
- #include "../devices.h"
-
- /* clock control register */
- #define LTQ_CGU_IFCCR 0x0018
-+/* system clock register */
-+#define LTQ_CGU_SYS 0x0010
-
- /* the enable / disable registers */
- #define LTQ_PMU_PWDCR 0x1C
- #define LTQ_PMU_PWDSR 0x20
-+#define LTQ_PMU_PWDCR1 0x24
-+#define LTQ_PMU_PWDSR1 0x28
-+
-+#define PWDCR(x) ((x) ? (LTQ_PMU_PWDCR1) : (LTQ_PMU_PWDCR))
-+#define PWDSR(x) ((x) ? (LTQ_PMU_PWDSR1) : (LTQ_PMU_PWDSR))
-+
-+/* CGU - clock generation unit */
-+#define CGU_EPHY 0x10
-+
-+/* PMU - power management unit */
-+#define PMU_DMA 0x0020
-+#define PMU_SPI 0x0100
-+#define PMU_EPHY 0x0080
-+#define PMU_USB 0x8041
-+#define PMU_STP 0x0800
-+#define PMU_GPT 0x1000
-+#define PMU_PPE 0x2000
-+#define PMU_FPI 0x4000
-+#define PMU_SWITCH 0x10000000
-+#define PMU_AHBS 0x2000
-+#define PMU_AHBM 0x8000
-+#define PMU_PCIE_CLK 0x80000000
-+
-+#define PMU1_PCIE_PHY 0x0001
-+#define PMU1_PCIE_CTL 0x0002
-+#define PMU1_PCIE_MSI 0x0020
-+#define PMU1_PCIE_PDI 0x0010
-
- #define ltq_pmu_w32(x, y) ltq_w32((x), ltq_pmu_membase + (y))
- #define ltq_pmu_r32(x) ltq_r32(ltq_pmu_membase + (x))
-@@ -36,28 +67,64 @@ void __iomem *ltq_cgu_membase;
- void __iomem *ltq_ebu_membase;
- static void __iomem *ltq_pmu_membase;
-
--void ltq_cgu_enable(unsigned int clk)
-+static int ltq_cgu_enable(struct clk *clk)
-+{
-+ ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | clk->bits, LTQ_CGU_IFCCR);
-+ return 0;
-+}
-+
-+static void ltq_cgu_disable(struct clk *clk)
- {
-- ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | clk, LTQ_CGU_IFCCR);
-+ ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~clk->bits, LTQ_CGU_IFCCR);
- }
-
--void ltq_pmu_enable(unsigned int module)
-+static int ltq_pmu_enable(struct clk *clk)
- {
- int err = 1000000;
-
-- ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) & ~module, LTQ_PMU_PWDCR);
-- do {} while (--err && (ltq_pmu_r32(LTQ_PMU_PWDSR) & module));
-+ ltq_pmu_w32(ltq_pmu_r32(PWDCR(clk->module)) & ~clk->bits,
-+ PWDCR(clk->module));
-+ do {} while (--err && (ltq_pmu_r32(PWDSR(clk->module)) & clk->bits));
-
- if (!err)
- panic("activating PMU module failed!\n");
-+
-+ return 0;
-+}
-+
-+static void ltq_pmu_disable(struct clk *clk)
-+{
-+ ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) | clk->bits, LTQ_PMU_PWDCR);
-+}
-+
-+static inline void clkdev_add_pmu(const char *dev, const char *con,
-+ unsigned int module, unsigned int bits)
-+{
-+ struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
-+
-+ clk->cl.dev_id = dev;
-+ clk->cl.con_id = con;
-+ clk->cl.clk = clk;
-+ clk->enable = ltq_pmu_enable;
-+ clk->disable = ltq_pmu_disable;
-+ clk->module = module;
-+ clk->bits = bits;
-+ clkdev_add(&clk->cl);
- }
--EXPORT_SYMBOL(ltq_pmu_enable);
-
--void ltq_pmu_disable(unsigned int module)
-+static inline void clkdev_add_cgu(const char *dev, const char *con,
-+ unsigned int bits)
- {
-- ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) | module, LTQ_PMU_PWDCR);
-+ struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
-+
-+ clk->cl.dev_id = dev;
-+ clk->cl.con_id = con;
-+ clk->cl.clk = clk;
-+ clk->enable = ltq_cgu_enable;
-+ clk->disable = ltq_cgu_disable;
-+ clk->bits = bits;
-+ clkdev_add(&clk->cl);
- }
--EXPORT_SYMBOL(ltq_pmu_disable);
-
- void __init ltq_soc_init(void)
- {
-@@ -75,4 +142,23 @@ void __init ltq_soc_init(void)
-
- /* make sure to unprotect the memory region where flash is located */
- ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0);
-+
-+ /* add our clocks */
-+ clkdev_add_pmu("ltq_dma", NULL, 0, PMU_DMA);
-+ clkdev_add_pmu("ltq_stp", NULL, 0, PMU_STP);
-+ clkdev_add_pmu("ltq_spi", NULL, 0, PMU_SPI);
-+ clkdev_add_pmu("ltq_etop", NULL, 0, PMU_PPE);
-+ if (ltq_is_ase()) {
-+ if (ltq_cgu_r32(LTQ_CGU_SYS) & (1 << 5))
-+ clkdev_add_static(CLOCK_266M, CLOCK_133M, CLOCK_133M);
-+ else
-+ clkdev_add_static(CLOCK_133M, CLOCK_133M, CLOCK_133M);
-+ clkdev_add_cgu("ltq_etop", "ephycgu", CGU_EPHY),
-+ clkdev_add_pmu("ltq_etop", "ephy", 0, PMU_EPHY);
-+ } else {
-+ clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
-+ ltq_danube_io_region_clock());
-+ if (ltq_is_ar9())
-+ clkdev_add_pmu("ltq_etop", "switch", 0, PMU_SWITCH);
-+ }
- }
--- /dev/null
+From 56b484094fed84e4e76532895c5a692f896a9492 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 11:21:08 +0100
+Subject: [PATCH 27/73] MIPS: lantiq: convert dma driver to clkdev api
+
+Update from old pmu_{dis,en}able() to ckldev api.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/lantiq/xway/Makefile.rej | 11 +++++++++++
+ arch/mips/lantiq/xway/dma.c | 6 +++++-
+ 2 files changed, 16 insertions(+), 1 deletions(-)
+ create mode 100644 arch/mips/lantiq/xway/Makefile.rej
+
+diff --git a/arch/mips/lantiq/xway/Makefile.rej b/arch/mips/lantiq/xway/Makefile.rej
+new file mode 100644
+index 0000000..c0d5b52
+--- /dev/null
++++ b/arch/mips/lantiq/xway/Makefile.rej
+@@ -0,0 +1,11 @@
++--- arch/mips/lantiq/xway/Makefile
+++++ arch/mips/lantiq/xway/Makefile
++@@ -1,7 +1,4 @@
++-obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o
++-
++-obj-$(CONFIG_SOC_XWAY) += prom-xway.o
++-obj-$(CONFIG_SOC_AMAZON_SE) += prom-ase.o
+++obj-y := prom.o sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o
++
++ obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
++ obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
+diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
+index 60cd11f..388f1aa 100644
+--- a/arch/mips/lantiq/xway/dma.c
++++ b/arch/mips/lantiq/xway/dma.c
+@@ -20,6 +20,7 @@
+ #include <linux/io.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/export.h>
++#include <linux/clk.h>
+
+ #include <lantiq_soc.h>
+ #include <xway_dma.h>
+@@ -216,6 +217,7 @@ EXPORT_SYMBOL_GPL(ltq_dma_init_port);
+ int __init
+ ltq_dma_init(void)
+ {
++ struct clk *clk;
+ int i;
+
+ /* remap dma register range */
+@@ -224,7 +226,9 @@ ltq_dma_init(void)
+ panic("Failed to remap dma memory\n");
+
+ /* power up and reset the dma engine */
+- ltq_pmu_enable(PMU_DMA);
++ clk = clk_get_sys("ltq_dma", NULL);
++ WARN_ON(!clk);
++ clk_enable(clk);
+ ltq_dma_w32_mask(0, DMA_RESET, LTQ_DMA_CTRL);
+
+ /* disable all interrupts */
+--
+1.7.9.1
+
+++ /dev/null
-From 07c4da1cf419022e5874c881511f051bb81e984e Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 8 Mar 2012 11:19:11 +0100
-Subject: [PATCH 27/70] MIPS: lantiq: convert falcon to clkdev api
-
-Unify sysctrl/clock code and add clkdev hooks to sysctrl.c
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- .../include/asm/mach-lantiq/falcon/lantiq_soc.h | 8 +-
- arch/mips/lantiq/falcon/Makefile | 2 +-
- arch/mips/lantiq/falcon/sysctrl.c | 129 ++++++++++++--------
- 3 files changed, 80 insertions(+), 59 deletions(-)
-
---- a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
-+++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
-@@ -95,6 +95,7 @@
-
- /* Activation Status Register */
- #define ACTS_ASC1_ACT 0x00000800
-+#define ACTS_I2C_ACT 0x00004000
- #define ACTS_P0 0x00010000
- #define ACTS_P1 0x00010000
- #define ACTS_P2 0x00020000
-@@ -106,13 +107,6 @@
- #define ACTS_PADCTRL3 0x00200000
- #define ACTS_PADCTRL4 0x00400000
-
--extern void ltq_sysctl_activate(int module, unsigned int mask);
--extern void ltq_sysctl_deactivate(int module, unsigned int mask);
--extern void ltq_sysctl_clken(int module, unsigned int mask);
--extern void ltq_sysctl_clkdis(int module, unsigned int mask);
--extern void ltq_sysctl_reboot(int module, unsigned int mask);
--extern int ltq_gpe_is_activated(unsigned int mask);
--
- /* global register ranges */
- extern __iomem void *ltq_ebu_membase;
- extern __iomem void *ltq_sys1_membase;
---- a/arch/mips/lantiq/falcon/Makefile
-+++ b/arch/mips/lantiq/falcon/Makefile
-@@ -1,2 +1,2 @@
--obj-y := clk.o prom.o reset.o sysctrl.o devices.o gpio.o
-+obj-y := prom.o reset.o sysctrl.o devices.o gpio.o
- obj-$(CONFIG_LANTIQ_MACH_EASY98000) += mach-easy98000.o
---- a/arch/mips/lantiq/falcon/sysctrl.c
-+++ b/arch/mips/lantiq/falcon/sysctrl.c
-@@ -9,11 +9,13 @@
-
- #include <linux/ioport.h>
- #include <linux/export.h>
-+#include <linux/clkdev.h>
- #include <asm/delay.h>
-
- #include <lantiq_soc.h>
-
- #include "devices.h"
-+#include "../clk.h"
-
- /* infrastructure control register */
- #define SYS1_INFRAC 0x00bc
-@@ -38,6 +40,10 @@
- #define LTQ_SYSCTL_DEACT 0x0028
- /* reboot Register */
- #define LTQ_SYSCTL_RBT 0x002c
-+/* CPU0 Clock Control Register */
-+#define LTQ_SYS1_CPU0CC 0x0040
-+/* clock divider bit */
-+#define LTQ_CPU0CC_CPUDIV 0x0001
-
- static struct resource ltq_sysctl_res[] = {
- MEM_RES("sys1", LTQ_SYS1_BASE_ADDR, LTQ_SYS1_SIZE),
-@@ -64,79 +70,67 @@ void __iomem *ltq_ebu_membase;
- #define ltq_status_r32(x) ltq_r32(ltq_status_membase + (x))
-
- static inline void
--ltq_sysctl_wait(int module, unsigned int mask,
-+ltq_sysctl_wait(struct clk *clk,
- unsigned int test, unsigned int reg)
- {
- int err = 1000000;
-
-- do {} while (--err && ((ltq_reg_r32(module, reg)
-- & mask) != test));
-+ do {} while (--err && ((ltq_reg_r32(clk->module, reg)
-+ & clk->bits) != test));
- if (!err)
-- pr_err("module de/activation failed %d %08X %08X\n",
-- module, mask, test);
-+ pr_err("module de/activation failed %d %08X %08X %08X\n",
-+ clk->module, clk->bits, test,
-+ ltq_reg_r32(clk->module, reg) & clk->bits);
- }
-
--void
--ltq_sysctl_activate(int module, unsigned int mask)
--{
-- if (module > SYSCTL_SYSGPE)
-- return;
--
-- ltq_reg_w32(module, mask, LTQ_SYSCTL_CLKEN);
-- ltq_reg_w32(module, mask, LTQ_SYSCTL_ACT);
-- ltq_sysctl_wait(module, mask, mask, LTQ_SYSCTL_ACTS);
-+static int
-+ltq_sysctl_activate(struct clk *clk)
-+{
-+ ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_CLKEN);
-+ ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_ACT);
-+ ltq_sysctl_wait(clk, clk->bits, LTQ_SYSCTL_ACTS);
-+ return 0;
- }
--EXPORT_SYMBOL(ltq_sysctl_activate);
-
--void
--ltq_sysctl_deactivate(int module, unsigned int mask)
-+static void
-+ltq_sysctl_deactivate(struct clk *clk)
- {
-- if (module > SYSCTL_SYSGPE)
-- return;
--
-- ltq_reg_w32(module, mask, LTQ_SYSCTL_CLKCLR);
-- ltq_reg_w32(module, mask, LTQ_SYSCTL_DEACT);
-- ltq_sysctl_wait(module, mask, 0, LTQ_SYSCTL_ACTS);
-+ ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_CLKCLR);
-+ ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_DEACT);
-+ ltq_sysctl_wait(clk, 0, LTQ_SYSCTL_ACTS);
- }
--EXPORT_SYMBOL(ltq_sysctl_deactivate);
-
--void
--ltq_sysctl_clken(int module, unsigned int mask)
-+static int
-+ltq_sysctl_clken(struct clk *clk)
- {
-- if (module > SYSCTL_SYSGPE)
-- return;
--
-- ltq_reg_w32(module, mask, LTQ_SYSCTL_CLKEN);
-- ltq_sysctl_wait(module, mask, mask, LTQ_SYSCTL_CLKS);
-+ ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_CLKEN);
-+ ltq_sysctl_wait(clk, clk->bits, LTQ_SYSCTL_CLKS);
-+ return 0;
- }
--EXPORT_SYMBOL(ltq_sysctl_clken);
-
--void
--ltq_sysctl_clkdis(int module, unsigned int mask)
-+static void
-+ltq_sysctl_clkdis(struct clk *clk)
- {
-- if (module > SYSCTL_SYSGPE)
-- return;
--
-- ltq_reg_w32(module, mask, LTQ_SYSCTL_CLKCLR);
-- ltq_sysctl_wait(module, mask, 0, LTQ_SYSCTL_CLKS);
-+ ltq_reg_w32(clk->module, clk->bits, LTQ_SYSCTL_CLKCLR);
-+ ltq_sysctl_wait(clk, 0, LTQ_SYSCTL_CLKS);
- }
--EXPORT_SYMBOL(ltq_sysctl_clkdis);
-
--void
--ltq_sysctl_reboot(int module, unsigned int mask)
-+static void
-+ltq_sysctl_reboot(struct clk *clk)
- {
- unsigned int act;
-+ unsigned int bits;
-
-- if (module > SYSCTL_SYSGPE)
-- return;
--
-- act = ltq_reg_r32(module, LTQ_SYSCTL_ACT);
-- if ((~act & mask) != 0)
-- ltq_sysctl_activate(module, ~act & mask);
-- ltq_reg_w32(module, act & mask, LTQ_SYSCTL_RBT);
-- ltq_sysctl_wait(module, mask, mask, LTQ_SYSCTL_ACTS);
-+ act = ltq_reg_r32(clk->module, LTQ_SYSCTL_ACT);
-+ bits = ~act & clk->bits;
-+ if (bits != 0) {
-+ ltq_reg_w32(clk->module, bits, LTQ_SYSCTL_CLKEN);
-+ ltq_reg_w32(clk->module, bits, LTQ_SYSCTL_ACT);
-+ ltq_sysctl_wait(clk, bits, LTQ_SYSCTL_ACTS);
-+ }
-+ ltq_reg_w32(clk->module, act & clk->bits, LTQ_SYSCTL_RBT);
-+ ltq_sysctl_wait(clk, clk->bits, LTQ_SYSCTL_ACTS);
- }
--EXPORT_SYMBOL(ltq_sysctl_reboot);
-
- /* enable the ONU core */
- static void
-@@ -167,6 +161,24 @@ ltq_gpe_enable(void)
- udelay(1);
- }
-
-+static inline void
-+clkdev_add_sys(const char *dev, unsigned int module,
-+ unsigned int bits)
-+{
-+ struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
-+
-+ clk->cl.dev_id = dev;
-+ clk->cl.con_id = NULL;
-+ clk->cl.clk = clk;
-+ clk->module = module;
-+ clk->activate = ltq_sysctl_activate;
-+ clk->deactivate = ltq_sysctl_deactivate;
-+ clk->enable = ltq_sysctl_clken;
-+ clk->disable = ltq_sysctl_clkdis;
-+ clk->reboot = ltq_sysctl_reboot;
-+ clkdev_add(&clk->cl);
-+}
-+
- void __init
- ltq_soc_init(void)
- {
-@@ -180,4 +192,19 @@ ltq_soc_init(void)
- ltq_ebu_membase = ltq_remap_resource(<q_ebu_res);
-
- ltq_gpe_enable();
-+
-+ /* get our 3 static rates for cpu, fpi and io clocks */
-+ if (ltq_sys1_r32(LTQ_SYS1_CPU0CC) & LTQ_CPU0CC_CPUDIV)
-+ clkdev_add_static(CLOCK_200M, CLOCK_100M, CLOCK_200M);
-+ else
-+ clkdev_add_static(CLOCK_400M, CLOCK_100M, CLOCK_200M);
-+
-+ /* add our clock domains */
-+ clkdev_add_sys("falcon_gpio.0", SYSCTL_SYSETH, ACTS_PADCTRL0 | ACTS_P0);
-+ clkdev_add_sys("falcon_gpio.1", SYSCTL_SYS1, ACTS_PADCTRL1 | ACTS_P1);
-+ clkdev_add_sys("falcon_gpio.2", SYSCTL_SYSETH, ACTS_PADCTRL2 | ACTS_P2);
-+ clkdev_add_sys("falcon_gpio.3", SYSCTL_SYS1, ACTS_PADCTRL3 | ACTS_P3);
-+ clkdev_add_sys("falcon_gpio.4", SYSCTL_SYS1, ACTS_PADCTRL4 | ACTS_P4);
-+ clkdev_add_sys("ltq_asc.1", SYSCTL_SYS1, ACTS_ASC1_ACT);
-+ clkdev_add_sys("falcon_i2c", SYSCTL_SYS1, ACTS_I2C_ACT);
- }
+++ /dev/null
-From e6a19ba12790d04267a9f052a3dc64fa1a8cac16 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 8 Mar 2012 11:21:08 +0100
-Subject: [PATCH 28/70] MIPS: lantiq: convert dma driver to clkdev api
-
-Update from old pmu_{dis,en}able() to ckldev api.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/lantiq/xway/Makefile.rej | 11 +++++++++++
- arch/mips/lantiq/xway/dma.c | 6 +++++-
- 2 files changed, 16 insertions(+), 1 deletions(-)
- create mode 100644 arch/mips/lantiq/xway/Makefile.rej
-
---- /dev/null
-+++ b/arch/mips/lantiq/xway/Makefile.rej
-@@ -0,0 +1,11 @@
-+--- arch/mips/lantiq/xway/Makefile
-++++ arch/mips/lantiq/xway/Makefile
-+@@ -1,7 +1,4 @@
-+-obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o
-+-
-+-obj-$(CONFIG_SOC_XWAY) += prom-xway.o
-+-obj-$(CONFIG_SOC_AMAZON_SE) += prom-ase.o
-++obj-y := prom.o sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o
-+
-+ obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
-+ obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
---- a/arch/mips/lantiq/xway/dma.c
-+++ b/arch/mips/lantiq/xway/dma.c
-@@ -20,6 +20,7 @@
- #include <linux/io.h>
- #include <linux/dma-mapping.h>
- #include <linux/export.h>
-+#include <linux/clk.h>
-
- #include <lantiq_soc.h>
- #include <xway_dma.h>
-@@ -216,6 +217,7 @@ EXPORT_SYMBOL_GPL(ltq_dma_init_port);
- int __init
- ltq_dma_init(void)
- {
-+ struct clk *clk;
- int i;
-
- /* remap dma register range */
-@@ -224,7 +226,9 @@ ltq_dma_init(void)
- panic("Failed to remap dma memory\n");
-
- /* power up and reset the dma engine */
-- ltq_pmu_enable(PMU_DMA);
-+ clk = clk_get_sys("ltq_dma", NULL);
-+ WARN_ON(!clk);
-+ clk_enable(clk);
- ltq_dma_w32_mask(0, DMA_RESET, LTQ_DMA_CTRL);
-
- /* disable all interrupts */
--- /dev/null
+From a76818770adabc7afdf3bef07f9f30d061c10082 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 11:21:33 +0100
+Subject: [PATCH 28/73] MIPS: lantiq: convert gpio_stp driver to clkdev api
+
+Update from old pmu_{dis,en}able() to ckldev api.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/lantiq/xway/gpio_stp.c | 12 +++++++++---
+ 1 files changed, 9 insertions(+), 3 deletions(-)
+
+diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
+index e6b4809..da91c5e 100644
+--- a/arch/mips/lantiq/xway/gpio_stp.c
++++ b/arch/mips/lantiq/xway/gpio_stp.c
+@@ -15,6 +15,8 @@
+ #include <linux/mutex.h>
+ #include <linux/io.h>
+ #include <linux/gpio.h>
++#include <linux/clk.h>
++#include <linux/err.h>
+
+ #include <lantiq_soc.h>
+
+@@ -78,8 +80,10 @@ static struct gpio_chip ltq_stp_chip = {
+ .owner = THIS_MODULE,
+ };
+
+-static int ltq_stp_hw_init(void)
++static int ltq_stp_hw_init(struct device *dev)
+ {
++ struct clk *clk;
++
+ /* sane defaults */
+ ltq_stp_w32(0, LTQ_STP_AR);
+ ltq_stp_w32(0, LTQ_STP_CPU0);
+@@ -105,7 +109,9 @@ static int ltq_stp_hw_init(void)
+ */
+ ltq_stp_w32_mask(0, LTQ_STP_ADSL_SRC, LTQ_STP_CON0);
+
+- ltq_pmu_enable(PMU_LED);
++ clk = clk_get(dev, NULL);
++ WARN_ON(IS_ERR(clk));
++ clk_enable(clk);
+ return 0;
+ }
+
+@@ -138,7 +144,7 @@ static int __devinit ltq_stp_probe(struct platform_device *pdev)
+ }
+ ret = gpiochip_add(<q_stp_chip);
+ if (!ret)
+- ret = ltq_stp_hw_init();
++ ret = ltq_stp_hw_init(&pdev->dev);
+
+ return ret;
+ }
+--
+1.7.9.1
+
--- /dev/null
+From 509bc67e8e365c8f1a0cb91abcac7c7772cf8335 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 11:22:03 +0100
+Subject: [PATCH 29/73] MIPS: lantiq: convert falcon gpio to clkdev api
+
+The falcon gpio clocks used to be enabled when registering the platform device.
+Move this code into the driver and use clkdev api.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/lantiq/falcon/devices.c | 5 -----
+ arch/mips/lantiq/falcon/gpio.c | 10 ++++++++++
+ 2 files changed, 10 insertions(+), 5 deletions(-)
+
+diff --git a/arch/mips/lantiq/falcon/devices.c b/arch/mips/lantiq/falcon/devices.c
+index 4f47b44..6cd7a88 100644
+--- a/arch/mips/lantiq/falcon/devices.c
++++ b/arch/mips/lantiq/falcon/devices.c
+@@ -111,9 +111,6 @@ falcon_register_gpio(void)
+ falcon_gpio1_res, ARRAY_SIZE(falcon_gpio1_res));
+ platform_device_register_simple("falcon_gpio", 2,
+ falcon_gpio2_res, ARRAY_SIZE(falcon_gpio2_res));
+- ltq_sysctl_activate(SYSCTL_SYS1, ACTS_PADCTRL1 | ACTS_P1);
+- ltq_sysctl_activate(SYSCTL_SYSETH, ACTS_PADCTRL0 |
+- ACTS_PADCTRL2 | ACTS_P0 | ACTS_P2);
+ }
+
+ void __init
+@@ -123,6 +120,4 @@ falcon_register_gpio_extra(void)
+ falcon_gpio3_res, ARRAY_SIZE(falcon_gpio3_res));
+ platform_device_register_simple("falcon_gpio", 4,
+ falcon_gpio4_res, ARRAY_SIZE(falcon_gpio4_res));
+- ltq_sysctl_activate(SYSCTL_SYS1,
+- ACTS_PADCTRL3 | ACTS_PADCTRL4 | ACTS_P3 | ACTS_P4);
+ }
+diff --git a/arch/mips/lantiq/falcon/gpio.c b/arch/mips/lantiq/falcon/gpio.c
+index a44f71b..4147d61 100644
+--- a/arch/mips/lantiq/falcon/gpio.c
++++ b/arch/mips/lantiq/falcon/gpio.c
+@@ -11,6 +11,7 @@
+ #include <linux/interrupt.h>
+ #include <linux/slab.h>
+ #include <linux/export.h>
++#include <linux/err.h>
+ #include <linux/platform_device.h>
+
+ #include <lantiq_soc.h>
+@@ -71,6 +72,7 @@ struct falcon_gpio_port {
+ void __iomem *port;
+ unsigned int irq_base;
+ unsigned int chained_irq;
++ struct clk *clk;
+ };
+
+ static struct falcon_gpio_port ltq_gpio_port[MAX_PORTS];
+@@ -332,6 +334,14 @@ falcon_gpio_probe(struct platform_device *pdev)
+ goto err;
+ }
+
++ gpio_port->clk = clk_get(&pdev->dev, NULL);
++ if (IS_ERR(gpio_port->clk)) {
++ dev_err(&pdev->dev, "Could not get clock\n");
++ ret = PTR_ERR(gpio_port->clk);;
++ goto err;
++ }
++ clk_enable(gpio_port->clk);
++
+ if (irq > 0) {
+ /* irq_chip support */
+ gpio_port->gpio_chip.to_irq = falcon_gpio_to_irq;
+--
+1.7.9.1
+
+++ /dev/null
-From 81cf50fd6cfff13e06cd587094f5094dec32d57d Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 8 Mar 2012 11:21:33 +0100
-Subject: [PATCH 29/70] MIPS: lantiq: convert gpio_stp driver to clkdev api
-
-Update from old pmu_{dis,en}able() to ckldev api.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/lantiq/xway/gpio_stp.c | 12 +++++++++---
- 1 files changed, 9 insertions(+), 3 deletions(-)
-
---- a/arch/mips/lantiq/xway/gpio_stp.c
-+++ b/arch/mips/lantiq/xway/gpio_stp.c
-@@ -15,6 +15,8 @@
- #include <linux/mutex.h>
- #include <linux/io.h>
- #include <linux/gpio.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-
- #include <lantiq_soc.h>
-
-@@ -78,8 +80,10 @@ static struct gpio_chip ltq_stp_chip = {
- .owner = THIS_MODULE,
- };
-
--static int ltq_stp_hw_init(void)
-+static int ltq_stp_hw_init(struct device *dev)
- {
-+ struct clk *clk;
-+
- /* sane defaults */
- ltq_stp_w32(0, LTQ_STP_AR);
- ltq_stp_w32(0, LTQ_STP_CPU0);
-@@ -105,7 +109,9 @@ static int ltq_stp_hw_init(void)
- */
- ltq_stp_w32_mask(0, LTQ_STP_ADSL_SRC, LTQ_STP_CON0);
-
-- ltq_pmu_enable(PMU_LED);
-+ clk = clk_get(dev, NULL);
-+ WARN_ON(IS_ERR(clk));
-+ clk_enable(clk);
- return 0;
- }
-
-@@ -138,7 +144,7 @@ static int __devinit ltq_stp_probe(struc
- }
- ret = gpiochip_add(<q_stp_chip);
- if (!ret)
-- ret = ltq_stp_hw_init();
-+ ret = ltq_stp_hw_init(&pdev->dev);
-
- return ret;
- }
+++ /dev/null
-From 3cb13f9992ae1948b6ca05c88d2bd25cf9e7cd41 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 8 Mar 2012 11:22:03 +0100
-Subject: [PATCH 30/70] MIPS: lantiq: convert falcon gpio to clkdev api
-
-The falcon gpio clocks used to be enabled when registering the platform device.
-Move this code into the driver and use clkdev api.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/lantiq/falcon/devices.c | 5 -----
- arch/mips/lantiq/falcon/gpio.c | 10 ++++++++++
- 2 files changed, 10 insertions(+), 5 deletions(-)
-
---- a/arch/mips/lantiq/falcon/devices.c
-+++ b/arch/mips/lantiq/falcon/devices.c
-@@ -111,9 +111,6 @@ falcon_register_gpio(void)
- falcon_gpio1_res, ARRAY_SIZE(falcon_gpio1_res));
- platform_device_register_simple("falcon_gpio", 2,
- falcon_gpio2_res, ARRAY_SIZE(falcon_gpio2_res));
-- ltq_sysctl_activate(SYSCTL_SYS1, ACTS_PADCTRL1 | ACTS_P1);
-- ltq_sysctl_activate(SYSCTL_SYSETH, ACTS_PADCTRL0 |
-- ACTS_PADCTRL2 | ACTS_P0 | ACTS_P2);
- }
-
- void __init
-@@ -123,6 +120,4 @@ falcon_register_gpio_extra(void)
- falcon_gpio3_res, ARRAY_SIZE(falcon_gpio3_res));
- platform_device_register_simple("falcon_gpio", 4,
- falcon_gpio4_res, ARRAY_SIZE(falcon_gpio4_res));
-- ltq_sysctl_activate(SYSCTL_SYS1,
-- ACTS_PADCTRL3 | ACTS_PADCTRL4 | ACTS_P3 | ACTS_P4);
- }
---- a/arch/mips/lantiq/falcon/gpio.c
-+++ b/arch/mips/lantiq/falcon/gpio.c
-@@ -11,6 +11,7 @@
- #include <linux/interrupt.h>
- #include <linux/slab.h>
- #include <linux/export.h>
-+#include <linux/err.h>
- #include <linux/platform_device.h>
-
- #include <lantiq_soc.h>
-@@ -71,6 +72,7 @@ struct falcon_gpio_port {
- void __iomem *port;
- unsigned int irq_base;
- unsigned int chained_irq;
-+ struct clk *clk;
- };
-
- static struct falcon_gpio_port ltq_gpio_port[MAX_PORTS];
-@@ -332,6 +334,14 @@ falcon_gpio_probe(struct platform_device
- goto err;
- }
-
-+ gpio_port->clk = clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(gpio_port->clk)) {
-+ dev_err(&pdev->dev, "Could not get clock\n");
-+ ret = PTR_ERR(gpio_port->clk);;
-+ goto err;
-+ }
-+ clk_enable(gpio_port->clk);
-+
- if (irq > 0) {
- /* irq_chip support */
- gpio_port->gpio_chip.to_irq = falcon_gpio_to_irq;
--- /dev/null
+From da5f76f9eb0563597855f6b89894443d30a62d4f Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 16 Feb 2012 20:17:16 +0100
+Subject: [PATCH 30/73] SERIAL: MIPS: lantiq: convert serial driver to clkdev
+ api
+
+Reference the FPI clock via its new access function.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: linux-serial@vger.kernel.org
+---
+ drivers/tty/serial/lantiq.c | 6 +++++-
+ 1 files changed, 5 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
+index 5d25828..1542ad6 100644
+--- a/drivers/tty/serial/lantiq.c
++++ b/drivers/tty/serial/lantiq.c
+@@ -540,6 +540,10 @@ lqasc_request_port(struct uart_port *port)
+ if (ltq_gpio_request(&pdev->dev, MUXC_SIF_TX_PIN,
+ 3, 1, "asc1-tx"))
+ return -EBUSY;
++ ltq_port->clk = clk_get(&pdev->dev, NULL);
++ if (IS_ERR(ltq_port->clk))
++ return PTR_ERR(ltq_port->clk);
++ clk_enable(ltq_port->clk);
+ }
+ return 0;
+ }
+@@ -698,7 +702,7 @@ lqasc_probe(struct platform_device *pdev)
+ if (lqasc_port[pdev->id] != NULL)
+ return -EBUSY;
+
+- clk = clk_get(&pdev->dev, "fpi");
++ clk = clk_get_fpi();
+ if (IS_ERR(clk)) {
+ pr_err("failed to get fpi clk\n");
+ return -ENOENT;
+--
+1.7.9.1
+
--- /dev/null
+From 96cc1d1baabe7bc6df02e90bcd78e6dde542d384 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 21 Feb 2012 14:25:21 +0100
+Subject: [PATCH 31/73] MIPS: lantiq: convert falcon debug uart to clkdev api
+
+On Falcon SoCs we have a secondary serial port that can be used to help
+debug the voice core. For the port to work several clocking bits need to
+be activated. We convert the code to clkdev api.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/lantiq/falcon/prom.c | 4 +---
+ drivers/tty/serial/lantiq.c | 7 ++++---
+ 2 files changed, 5 insertions(+), 6 deletions(-)
+
+diff --git a/arch/mips/lantiq/falcon/prom.c b/arch/mips/lantiq/falcon/prom.c
+index f98b389..2a4eea17 100644
+--- a/arch/mips/lantiq/falcon/prom.c
++++ b/arch/mips/lantiq/falcon/prom.c
+@@ -43,10 +43,8 @@ ltq_soc_setup(void)
+ ltq_register_asc(0);
+ ltq_register_wdt();
+ falcon_register_gpio();
+- if (register_asc1) {
++ if (register_asc1)
+ ltq_register_asc(1);
+- ltq_sysctl_activate(SYSCTL_SYS1, ACTS_ASC1_ACT);
+- }
+ }
+
+ void __init
+diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
+index 1542ad6..82956de 100644
+--- a/drivers/tty/serial/lantiq.c
++++ b/drivers/tty/serial/lantiq.c
+@@ -117,6 +117,7 @@ static DEFINE_SPINLOCK(ltq_asc_lock);
+
+ struct ltq_uart_port {
+ struct uart_port port;
++ struct clk *fpiclk;
+ struct clk *clk;
+ unsigned int tx_irq;
+ unsigned int rx_irq;
+@@ -319,7 +320,7 @@ lqasc_startup(struct uart_port *port)
+ struct ltq_uart_port *ltq_port = to_ltq_uart_port(port);
+ int retval;
+
+- port->uartclk = clk_get_rate(ltq_port->clk);
++ port->uartclk = clk_get_rate(ltq_port->fpiclk);
+
+ ltq_w32_mask(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET),
+ port->membase + LTQ_ASC_CLC);
+@@ -646,7 +647,7 @@ lqasc_console_setup(struct console *co, char *options)
+
+ port = <q_port->port;
+
+- port->uartclk = clk_get_rate(ltq_port->clk);
++ port->uartclk = clk_get_rate(ltq_port->fpiclk);
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+@@ -731,7 +732,7 @@ lqasc_probe(struct platform_device *pdev)
+ port->irq = tx_irq; /* unused, just to be backward-compatibe */
+ port->mapbase = mmres->start;
+
+- ltq_port->clk = clk;
++ ltq_port->fpiclk = clk;
+
+ ltq_port->tx_irq = tx_irq;
+ ltq_port->rx_irq = rx_irq;
+--
+1.7.9.1
+
+++ /dev/null
-From 1fdd8c04b65bd55730e6931a520cc1dabfc4d190 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 16 Feb 2012 20:17:16 +0100
-Subject: [PATCH 31/70] SERIAL: MIPS: lantiq: convert serial driver to clkdev
- api
-
-Reference the FPI clock via its new access function.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: linux-serial@vger.kernel.org
----
- drivers/tty/serial/lantiq.c | 6 +++++-
- 1 files changed, 5 insertions(+), 1 deletions(-)
-
---- a/drivers/tty/serial/lantiq.c
-+++ b/drivers/tty/serial/lantiq.c
-@@ -540,6 +540,10 @@ lqasc_request_port(struct uart_port *por
- if (ltq_gpio_request(&pdev->dev, MUXC_SIF_TX_PIN,
- 3, 1, "asc1-tx"))
- return -EBUSY;
-+ ltq_port->clk = clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(ltq_port->clk))
-+ return PTR_ERR(ltq_port->clk);
-+ clk_enable(ltq_port->clk);
- }
- return 0;
- }
-@@ -698,7 +702,7 @@ lqasc_probe(struct platform_device *pdev
- if (lqasc_port[pdev->id] != NULL)
- return -EBUSY;
-
-- clk = clk_get(&pdev->dev, "fpi");
-+ clk = clk_get_fpi();
- if (IS_ERR(clk)) {
- pr_err("failed to get fpi clk\n");
- return -ENOENT;
+++ /dev/null
-From 005044f41ed9884ee23d756a5950e38679d31cc7 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 21 Feb 2012 14:25:21 +0100
-Subject: [PATCH 32/70] MIPS: lantiq: convert falcon debug uart to clkdev api
-
-On Falcon SoCs we have a secondary serial port that can be used to help
-debug the voice core. For the port to work several clocking bits need to
-be activated. We convert the code to clkdev api.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/lantiq/falcon/prom.c | 4 +---
- drivers/tty/serial/lantiq.c | 7 ++++---
- 2 files changed, 5 insertions(+), 6 deletions(-)
-
---- a/arch/mips/lantiq/falcon/prom.c
-+++ b/arch/mips/lantiq/falcon/prom.c
-@@ -43,10 +43,8 @@ ltq_soc_setup(void)
- ltq_register_asc(0);
- ltq_register_wdt();
- falcon_register_gpio();
-- if (register_asc1) {
-+ if (register_asc1)
- ltq_register_asc(1);
-- ltq_sysctl_activate(SYSCTL_SYS1, ACTS_ASC1_ACT);
-- }
- }
-
- void __init
---- a/drivers/tty/serial/lantiq.c
-+++ b/drivers/tty/serial/lantiq.c
-@@ -117,6 +117,7 @@ static DEFINE_SPINLOCK(ltq_asc_lock);
-
- struct ltq_uart_port {
- struct uart_port port;
-+ struct clk *fpiclk;
- struct clk *clk;
- unsigned int tx_irq;
- unsigned int rx_irq;
-@@ -319,7 +320,7 @@ lqasc_startup(struct uart_port *port)
- struct ltq_uart_port *ltq_port = to_ltq_uart_port(port);
- int retval;
-
-- port->uartclk = clk_get_rate(ltq_port->clk);
-+ port->uartclk = clk_get_rate(ltq_port->fpiclk);
-
- ltq_w32_mask(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET),
- port->membase + LTQ_ASC_CLC);
-@@ -646,7 +647,7 @@ lqasc_console_setup(struct console *co,
-
- port = <q_port->port;
-
-- port->uartclk = clk_get_rate(ltq_port->clk);
-+ port->uartclk = clk_get_rate(ltq_port->fpiclk);
-
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
-@@ -731,7 +732,7 @@ lqasc_probe(struct platform_device *pdev
- port->irq = tx_irq; /* unused, just to be backward-compatibe */
- port->mapbase = mmres->start;
-
-- ltq_port->clk = clk;
-+ ltq_port->fpiclk = clk;
-
- ltq_port->tx_irq = tx_irq;
- ltq_port->rx_irq = rx_irq;
--- /dev/null
+From e3b7883bacd449a22e262cc359dc923c78eb32f6 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 11:23:00 +0100
+Subject: [PATCH 32/73] NET: MIPS: lantiq: convert etop driver to clkdev api
+
+Update from old pmu_{dis,en}able() to ckldev api.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: netdev@vger.kernel.org
+---
+ drivers/net/ethernet/lantiq_etop.c | 49 ++++++++++++++++++++++++++++++-----
+ 1 files changed, 42 insertions(+), 7 deletions(-)
+
+diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
+index fcbb9c7..a084d74 100644
+--- a/drivers/net/ethernet/lantiq_etop.c
++++ b/drivers/net/ethernet/lantiq_etop.c
+@@ -36,6 +36,7 @@
+ #include <linux/io.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/module.h>
++#include <linux/clk.h>
+
+ #include <asm/checksum.h>
+
+@@ -147,6 +148,11 @@ struct ltq_etop_priv {
+ int tx_free[MAX_DMA_CHAN >> 1];
+
+ spinlock_t lock;
++
++ struct clk *clk_ppe;
++ struct clk *clk_switch;
++ struct clk *clk_ephy;
++ struct clk *clk_ephycgu;
+ };
+
+ static int ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr,
+@@ -280,16 +286,27 @@ ltq_etop_hw_exit(struct net_device *dev)
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ int i;
+
+- ltq_pmu_disable(PMU_PPE);
++ clk_disable(priv->clk_ppe);
++
++ if (ltq_has_gbit())
++ clk_disable(priv->clk_switch);
++
++ if (ltq_is_ase()) {
++ clk_disable(priv->clk_ephy);
++ clk_disable(priv->clk_ephycgu);
++ }
++
+ for (i = 0; i < MAX_DMA_CHAN; i++)
+ if (IS_TX(i) || IS_RX(i))
+ ltq_etop_free_channel(dev, &priv->ch[i]);
+ }
+
+ static void
+-ltq_etop_gbit_init(void)
++ltq_etop_gbit_init(struct net_device *dev)
+ {
+- ltq_pmu_enable(PMU_SWITCH);
++ struct ltq_etop_priv *priv = netdev_priv(dev);
++
++ clk_enable(priv->clk_switch);
+
+ ltq_gbit_w32_mask(0, GCTL0_SE, LTQ_GBIT_GCTL0);
+ /** Disable MDIO auto polling mode */
+@@ -312,10 +329,10 @@ ltq_etop_hw_init(struct net_device *dev)
+ int err = 0;
+ int i;
+
+- ltq_pmu_enable(PMU_PPE);
++ clk_enable(priv->clk_ppe);
+
+ if (ltq_has_gbit()) {
+- ltq_etop_gbit_init();
++ ltq_etop_gbit_init(dev);
+ /* force the etops link to the gbit to MII */
+ mii_mode = PHY_INTERFACE_MODE_MII;
+ }
+@@ -333,11 +350,11 @@ ltq_etop_hw_init(struct net_device *dev)
+
+ default:
+ if (ltq_is_ase()) {
+- ltq_pmu_enable(PMU_EPHY);
++ clk_enable(priv->clk_ephy);
+ /* disable external MII */
+ ltq_etop_w32_mask(0, ETOP_CFG_MII0, LTQ_ETOP_CFG);
+ /* enable clock for internal PHY */
+- ltq_cgu_enable(CGU_EPHY);
++ clk_enable(priv->clk_ephycgu);
+ /* we need to write this magic to the internal phy to
+ make it work */
+ ltq_etop_mdio_wr(NULL, 0x8, 0x12, 0xC020);
+@@ -880,6 +897,24 @@ ltq_etop_probe(struct platform_device *pdev)
+ priv->res = res;
+ priv->pldata = dev_get_platdata(&pdev->dev);
+ priv->netdev = dev;
++
++ priv->clk_ppe = clk_get(&pdev->dev, NULL);
++ if (IS_ERR(priv->clk_ppe))
++ return PTR_ERR(priv->clk_ppe);
++ if (ltq_has_gbit()) {
++ priv->clk_switch = clk_get(&pdev->dev, "switch");
++ if (IS_ERR(priv->clk_switch))
++ return PTR_ERR(priv->clk_switch);
++ }
++ if (ltq_is_ase()) {
++ priv->clk_ephy = clk_get(&pdev->dev, "ephy");
++ if (IS_ERR(priv->clk_ephy))
++ return PTR_ERR(priv->clk_ephy);
++ priv->clk_ephycgu = clk_get(&pdev->dev, "ephycgu");
++ if (IS_ERR(priv->clk_ephycgu))
++ return PTR_ERR(priv->clk_ephycgu);
++ }
++
+ spin_lock_init(&priv->lock);
+
+ for (i = 0; i < MAX_DMA_CHAN; i++) {
+--
+1.7.9.1
+
+++ /dev/null
-From c96f5cae05788c326f63c8b769e53c6e15215e70 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 8 Mar 2012 11:23:00 +0100
-Subject: [PATCH 33/70] NET: MIPS: lantiq: convert etop driver to clkdev api
-
-Update from old pmu_{dis,en}able() to ckldev api.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: netdev@vger.kernel.org
----
- drivers/net/ethernet/lantiq_etop.c | 49 ++++++++++++++++++++++++++++++-----
- 1 files changed, 42 insertions(+), 7 deletions(-)
-
---- a/drivers/net/ethernet/lantiq_etop.c
-+++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -36,6 +36,7 @@
- #include <linux/io.h>
- #include <linux/dma-mapping.h>
- #include <linux/module.h>
-+#include <linux/clk.h>
-
- #include <asm/checksum.h>
-
-@@ -147,6 +148,11 @@ struct ltq_etop_priv {
- int tx_free[MAX_DMA_CHAN >> 1];
-
- spinlock_t lock;
-+
-+ struct clk *clk_ppe;
-+ struct clk *clk_switch;
-+ struct clk *clk_ephy;
-+ struct clk *clk_ephycgu;
- };
-
- static int ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr,
-@@ -280,16 +286,27 @@ ltq_etop_hw_exit(struct net_device *dev)
- struct ltq_etop_priv *priv = netdev_priv(dev);
- int i;
-
-- ltq_pmu_disable(PMU_PPE);
-+ clk_disable(priv->clk_ppe);
-+
-+ if (ltq_has_gbit())
-+ clk_disable(priv->clk_switch);
-+
-+ if (ltq_is_ase()) {
-+ clk_disable(priv->clk_ephy);
-+ clk_disable(priv->clk_ephycgu);
-+ }
-+
- for (i = 0; i < MAX_DMA_CHAN; i++)
- if (IS_TX(i) || IS_RX(i))
- ltq_etop_free_channel(dev, &priv->ch[i]);
- }
-
- static void
--ltq_etop_gbit_init(void)
-+ltq_etop_gbit_init(struct net_device *dev)
- {
-- ltq_pmu_enable(PMU_SWITCH);
-+ struct ltq_etop_priv *priv = netdev_priv(dev);
-+
-+ clk_enable(priv->clk_switch);
-
- ltq_gbit_w32_mask(0, GCTL0_SE, LTQ_GBIT_GCTL0);
- /** Disable MDIO auto polling mode */
-@@ -312,10 +329,10 @@ ltq_etop_hw_init(struct net_device *dev)
- int err = 0;
- int i;
-
-- ltq_pmu_enable(PMU_PPE);
-+ clk_enable(priv->clk_ppe);
-
- if (ltq_has_gbit()) {
-- ltq_etop_gbit_init();
-+ ltq_etop_gbit_init(dev);
- /* force the etops link to the gbit to MII */
- mii_mode = PHY_INTERFACE_MODE_MII;
- }
-@@ -333,11 +350,11 @@ ltq_etop_hw_init(struct net_device *dev)
-
- default:
- if (ltq_is_ase()) {
-- ltq_pmu_enable(PMU_EPHY);
-+ clk_enable(priv->clk_ephy);
- /* disable external MII */
- ltq_etop_w32_mask(0, ETOP_CFG_MII0, LTQ_ETOP_CFG);
- /* enable clock for internal PHY */
-- ltq_cgu_enable(CGU_EPHY);
-+ clk_enable(priv->clk_ephycgu);
- /* we need to write this magic to the internal phy to
- make it work */
- ltq_etop_mdio_wr(NULL, 0x8, 0x12, 0xC020);
-@@ -880,6 +897,24 @@ ltq_etop_probe(struct platform_device *p
- priv->res = res;
- priv->pldata = dev_get_platdata(&pdev->dev);
- priv->netdev = dev;
-+
-+ priv->clk_ppe = clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(priv->clk_ppe))
-+ return PTR_ERR(priv->clk_ppe);
-+ if (ltq_has_gbit()) {
-+ priv->clk_switch = clk_get(&pdev->dev, "switch");
-+ if (IS_ERR(priv->clk_switch))
-+ return PTR_ERR(priv->clk_switch);
-+ }
-+ if (ltq_is_ase()) {
-+ priv->clk_ephy = clk_get(&pdev->dev, "ephy");
-+ if (IS_ERR(priv->clk_ephy))
-+ return PTR_ERR(priv->clk_ephy);
-+ priv->clk_ephycgu = clk_get(&pdev->dev, "ephycgu");
-+ if (IS_ERR(priv->clk_ephycgu))
-+ return PTR_ERR(priv->clk_ephycgu);
-+ }
-+
- spin_lock_init(&priv->lock);
-
- for (i = 0; i < MAX_DMA_CHAN; i++) {
--- /dev/null
+From f2a29d33abb24184f84533e2c6032d4b1c3fd346 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 16 Feb 2012 20:17:50 +0100
+Subject: [PATCH 33/73] WDT: MIPS: lantiq: convert watchdog driver to clkdev
+ api
+
+Refrence the IO region clock via its new access function.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: linux-watchdog@vger.kernel.org
+---
+ drivers/watchdog/lantiq_wdt.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/watchdog/lantiq_wdt.c b/drivers/watchdog/lantiq_wdt.c
+index 179bf98..da2b09f 100644
+--- a/drivers/watchdog/lantiq_wdt.c
++++ b/drivers/watchdog/lantiq_wdt.c
+@@ -206,7 +206,7 @@ ltq_wdt_probe(struct platform_device *pdev)
+ }
+
+ /* we do not need to enable the clock as it is always running */
+- clk = clk_get(&pdev->dev, "io");
++ clk = clk_get_io();
+ WARN_ON(!clk);
+ ltq_io_region_clk_rate = clk_get_rate(clk);
+ clk_put(clk);
+--
+1.7.9.1
+
--- /dev/null
+From f2c407ca7b975f979b0d73d2e52a73991de13dd9 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 11:44:55 +0100
+Subject: [PATCH 34/73] MIPS: lantiq: unify xway prom code
+
+The xway prom-ase.c and prom-xway.c files are redundant. Unify the 2 files.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/lantiq/xway/Makefile | 5 +--
+ arch/mips/lantiq/xway/Makefile.rej | 11 -----
+ arch/mips/lantiq/xway/prom-ase.c | 48 ----------------------
+ arch/mips/lantiq/xway/prom-xway.c | 64 -----------------------------
+ arch/mips/lantiq/xway/prom.c | 79 ++++++++++++++++++++++++++++++++++++
+ 5 files changed, 80 insertions(+), 127 deletions(-)
+ delete mode 100644 arch/mips/lantiq/xway/Makefile.rej
+ delete mode 100644 arch/mips/lantiq/xway/prom-ase.c
+ delete mode 100644 arch/mips/lantiq/xway/prom-xway.c
+ create mode 100644 arch/mips/lantiq/xway/prom.c
+
+diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
+index 4dcb96f..9d1a0a2 100644
+--- a/arch/mips/lantiq/xway/Makefile
++++ b/arch/mips/lantiq/xway/Makefile
+@@ -1,7 +1,4 @@
+-obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o
+-
+-obj-$(CONFIG_SOC_XWAY) += prom-xway.o
+-obj-$(CONFIG_SOC_AMAZON_SE) += prom-ase.o
++obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o
+
+ obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
+ obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
+diff --git a/arch/mips/lantiq/xway/Makefile.rej b/arch/mips/lantiq/xway/Makefile.rej
+deleted file mode 100644
+index c0d5b52..0000000
+--- a/arch/mips/lantiq/xway/Makefile.rej
++++ /dev/null
+@@ -1,11 +0,0 @@
+---- arch/mips/lantiq/xway/Makefile
+-+++ arch/mips/lantiq/xway/Makefile
+-@@ -1,7 +1,4 @@
+--obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o
+--
+--obj-$(CONFIG_SOC_XWAY) += prom-xway.o
+--obj-$(CONFIG_SOC_AMAZON_SE) += prom-ase.o
+-+obj-y := prom.o sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o
+-
+- obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
+- obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
+diff --git a/arch/mips/lantiq/xway/prom-ase.c b/arch/mips/lantiq/xway/prom-ase.c
+deleted file mode 100644
+index 3f86a3b..0000000
+--- a/arch/mips/lantiq/xway/prom-ase.c
++++ /dev/null
+@@ -1,48 +0,0 @@
+-/*
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- *
+- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+- */
+-
+-#include <linux/export.h>
+-#include <linux/clk.h>
+-#include <asm/bootinfo.h>
+-#include <asm/time.h>
+-
+-#include <lantiq_soc.h>
+-
+-#include "devices.h"
+-#include "../prom.h"
+-
+-#define SOC_AMAZON_SE "Amazon_SE"
+-
+-#define PART_SHIFT 12
+-#define PART_MASK 0x0FFFFFFF
+-#define REV_SHIFT 28
+-#define REV_MASK 0xF0000000
+-
+-void __init ltq_soc_detect(struct ltq_soc_info *i)
+-{
+- i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
+- i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
+- sprintf(i->rev_type, "1.%d", i->rev);
+- switch (i->partnum) {
+- case SOC_ID_AMAZON_SE:
+- i->name = SOC_AMAZON_SE;
+- i->type = SOC_TYPE_AMAZON_SE;
+- break;
+-
+- default:
+- unreachable();
+- break;
+- }
+-}
+-
+-void __init ltq_soc_setup(void)
+-{
+- ltq_register_ase_asc();
+- ltq_register_gpio();
+- ltq_register_wdt();
+-}
+diff --git a/arch/mips/lantiq/xway/prom-xway.c b/arch/mips/lantiq/xway/prom-xway.c
+deleted file mode 100644
+index d823a92..0000000
+--- a/arch/mips/lantiq/xway/prom-xway.c
++++ /dev/null
+@@ -1,64 +0,0 @@
+-/*
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- *
+- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+- */
+-
+-#include <linux/export.h>
+-#include <linux/clk.h>
+-#include <asm/bootinfo.h>
+-#include <asm/time.h>
+-
+-#include <lantiq_soc.h>
+-
+-#include "devices.h"
+-#include "../prom.h"
+-
+-#define SOC_DANUBE "Danube"
+-#define SOC_TWINPASS "Twinpass"
+-#define SOC_AR9 "AR9"
+-
+-#define PART_SHIFT 12
+-#define PART_MASK 0x0FFFFFFF
+-#define REV_SHIFT 28
+-#define REV_MASK 0xF0000000
+-
+-void __init ltq_soc_detect(struct ltq_soc_info *i)
+-{
+- i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
+- i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
+- sprintf(i->rev_type, "1.%d", i->rev);
+- switch (i->partnum) {
+- case SOC_ID_DANUBE1:
+- case SOC_ID_DANUBE2:
+- i->name = SOC_DANUBE;
+- i->type = SOC_TYPE_DANUBE;
+- break;
+-
+- case SOC_ID_TWINPASS:
+- i->name = SOC_TWINPASS;
+- i->type = SOC_TYPE_DANUBE;
+- break;
+-
+- case SOC_ID_ARX188:
+- case SOC_ID_ARX168:
+- case SOC_ID_ARX182:
+- i->name = SOC_AR9;
+- i->type = SOC_TYPE_AR9;
+- break;
+-
+- default:
+- unreachable();
+- break;
+- }
+-}
+-
+-void __init ltq_soc_setup(void)
+-{
+- ltq_register_asc(0);
+- ltq_register_asc(1);
+- ltq_register_gpio();
+- ltq_register_wdt();
+-}
+diff --git a/arch/mips/lantiq/xway/prom.c b/arch/mips/lantiq/xway/prom.c
+new file mode 100644
+index 0000000..0929acb
+--- /dev/null
++++ b/arch/mips/lantiq/xway/prom.c
+@@ -0,0 +1,79 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/export.h>
++#include <linux/clk.h>
++#include <asm/bootinfo.h>
++#include <asm/time.h>
++
++#include <lantiq_soc.h>
++
++#include "../prom.h"
++#include "devices.h"
++
++#define SOC_DANUBE "Danube"
++#define SOC_TWINPASS "Twinpass"
++#define SOC_AR9 "AR9"
++#define SOC_VR9 "VR9"
++
++#define PART_SHIFT 12
++#define PART_MASK 0x0FFFFFFF
++#define REV_SHIFT 28
++#define REV_MASK 0xF0000000
++
++#define SOC_AMAZON_SE "Amazon_SE"
++
++void __init ltq_soc_detect(struct ltq_soc_info *i)
++{
++ i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
++ i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
++ sprintf(i->rev_type, "1.%d", i->rev);
++ switch (i->partnum) {
++ case SOC_ID_DANUBE1:
++ case SOC_ID_DANUBE2:
++ i->name = SOC_DANUBE;
++ i->type = SOC_TYPE_DANUBE;
++ break;
++
++ case SOC_ID_TWINPASS:
++ i->name = SOC_TWINPASS;
++ i->type = SOC_TYPE_DANUBE;
++ break;
++
++ case SOC_ID_ARX188:
++ case SOC_ID_ARX168:
++ case SOC_ID_ARX182:
++ i->name = SOC_AR9;
++ i->type = SOC_TYPE_AR9;
++ break;
++
++ case SOC_ID_AMAZON_SE:
++ i->name = SOC_AMAZON_SE;
++ i->type = SOC_TYPE_AMAZON_SE;
++#ifdef CONFIG_PCI
++ panic("ase is only supported for non pci kernels");
++#endif
++ break;
++
++ default:
++ unreachable();
++ break;
++ }
++}
++
++void __init ltq_soc_setup(void)
++{
++ if (ltq_is_ase()) {
++ ltq_register_ase_asc();
++ } else {
++ ltq_register_asc(0);
++ ltq_register_asc(1);
++ }
++ ltq_register_gpio();
++ ltq_register_wdt();
++}
+--
+1.7.9.1
+
+++ /dev/null
-From ac9ded7942720231ed139ac0660e60a3a2f82b86 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 16 Feb 2012 20:17:50 +0100
-Subject: [PATCH 34/70] WDT: MIPS: lantiq: convert watchdog driver to clkdev
- api
-
-Refrence the IO region clock via its new access function.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: linux-watchdog@vger.kernel.org
----
- drivers/watchdog/lantiq_wdt.c | 2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
---- a/drivers/watchdog/lantiq_wdt.c
-+++ b/drivers/watchdog/lantiq_wdt.c
-@@ -206,7 +206,7 @@ ltq_wdt_probe(struct platform_device *pd
- }
-
- /* we do not need to enable the clock as it is always running */
-- clk = clk_get(&pdev->dev, "io");
-+ clk = clk_get_io();
- WARN_ON(!clk);
- ltq_io_region_clk_rate = clk_get_rate(clk);
- clk_put(clk);
--- /dev/null
+From 958d1d653fe13627d13907e61ae201fe62ddd99f Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 21 Feb 2012 09:48:11 +0100
+Subject: [PATCH 35/73] MIPS: lantiq: add vr9 support
+
+VR9 is a VDSL SoC made by Lantiq. It is very similar to the AR9.
+This patch adds the clkdev init code and SoC detection for the VR9.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 3 +
+ arch/mips/lantiq/xway/clk.c | 83 ++++++++++++++++++++
+ arch/mips/lantiq/xway/prom.c | 6 ++
+ arch/mips/lantiq/xway/sysctrl.c | 12 +++-
+ 4 files changed, 103 insertions(+), 1 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index e9d2dd4..5d11eb7 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -21,6 +21,9 @@
+ #define SOC_ID_ARX188 0x16C
+ #define SOC_ID_ARX168 0x16D
+ #define SOC_ID_ARX182 0x16F
++#define SOC_ID_VRX288 0x1C0 /* VRX288 v1.1 */
++#define SOC_ID_VRX268 0x1C2 /* VRX268 v1.1 */
++#define SOC_ID_GRX288 0x1C9 /* GRX288 v1.1 */
+
+ /* SoC Types */
+ #define SOC_TYPE_DANUBE 0x01
+diff --git a/arch/mips/lantiq/xway/clk.c b/arch/mips/lantiq/xway/clk.c
+index f3b50fc..3635c9f 100644
+--- a/arch/mips/lantiq/xway/clk.c
++++ b/arch/mips/lantiq/xway/clk.c
+@@ -225,3 +225,86 @@ unsigned long ltq_danube_fpi_hz(void)
+ return ddr_clock >> 1;
+ return ddr_clock;
+ }
++
++unsigned long ltq_vr9_cpu_hz(void)
++{
++ unsigned int cpu_sel;
++ unsigned long clk;
++
++ cpu_sel = (ltq_cgu_r32(LTQ_CGU_SYS_VR9) >> 4) & 0xf;
++
++ switch (cpu_sel) {
++ case 0:
++ clk = CLOCK_600M;
++ break;
++ case 1:
++ clk = CLOCK_500M;
++ break;
++ case 2:
++ clk = CLOCK_393M;
++ break;
++ case 3:
++ clk = CLOCK_333M;
++ break;
++ case 5:
++ case 6:
++ clk = CLOCK_196_608M;
++ break;
++ case 7:
++ clk = CLOCK_167M;
++ break;
++ case 4:
++ case 8:
++ case 9:
++ clk = CLOCK_125M;
++ break;
++ default:
++ clk = 0;
++ break;
++ }
++
++ return clk;
++}
++
++unsigned long ltq_vr9_fpi_hz(void)
++{
++ unsigned int ocp_sel, cpu_clk;
++ unsigned long clk;
++
++ cpu_clk = ltq_vr9_cpu_hz();
++ ocp_sel = ltq_cgu_r32(LTQ_CGU_SYS_VR9) & 0x3;
++
++ switch (ocp_sel) {
++ case 0:
++ /* OCP ratio 1 */
++ clk = cpu_clk;
++ break;
++ case 2:
++ /* OCP ratio 2 */
++ clk = cpu_clk / 2;
++ break;
++ case 3:
++ /* OCP ratio 2.5 */
++ clk = (cpu_clk * 2) / 5;
++ break;
++ case 4:
++ /* OCP ratio 3 */
++ clk = cpu_clk / 3;
++ break;
++ default:
++ clk = 0;
++ break;
++ }
++
++ return clk;
++}
++
++unsigned long ltq_vr9_io_region_clock(void)
++{
++ return ltq_vr9_fpi_hz();
++}
++
++unsigned long ltq_vr9_fpi_bus_clock(int fpi)
++{
++ return ltq_vr9_fpi_hz();
++}
+diff --git a/arch/mips/lantiq/xway/prom.c b/arch/mips/lantiq/xway/prom.c
+index 0929acb..b6f56b7 100644
+--- a/arch/mips/lantiq/xway/prom.c
++++ b/arch/mips/lantiq/xway/prom.c
+@@ -60,6 +60,12 @@ void __init ltq_soc_detect(struct ltq_soc_info *i)
+ #endif
+ break;
+
++ case SOC_ID_VRX268:
++ case SOC_ID_VRX288:
++ i->name = SOC_VR9;
++ i->type = SOC_TYPE_VR9;
++ break;
++
+ default:
+ unreachable();
+ break;
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+index c5782b5..38f02f9 100644
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -147,7 +147,8 @@ void __init ltq_soc_init(void)
+ clkdev_add_pmu("ltq_dma", NULL, 0, PMU_DMA);
+ clkdev_add_pmu("ltq_stp", NULL, 0, PMU_STP);
+ clkdev_add_pmu("ltq_spi", NULL, 0, PMU_SPI);
+- clkdev_add_pmu("ltq_etop", NULL, 0, PMU_PPE);
++ if (!ltq_is_vr9())
++ clkdev_add_pmu("ltq_etop", NULL, 0, PMU_PPE);
+ if (ltq_is_ase()) {
+ if (ltq_cgu_r32(LTQ_CGU_SYS) & (1 << 5))
+ clkdev_add_static(CLOCK_266M, CLOCK_133M, CLOCK_133M);
+@@ -155,6 +156,15 @@ void __init ltq_soc_init(void)
+ clkdev_add_static(CLOCK_133M, CLOCK_133M, CLOCK_133M);
+ clkdev_add_cgu("ltq_etop", "ephycgu", CGU_EPHY),
+ clkdev_add_pmu("ltq_etop", "ephy", 0, PMU_EPHY);
++ } else if (ltq_is_vr9()) {
++ clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(),
++ ltq_vr9_io_region_clock());
++ clkdev_add_pmu("ltq_pcie", "phy", 1, PMU1_PCIE_PHY);
++ clkdev_add_pmu("ltq_pcie", "bus", 0, PMU_PCIE_CLK);
++ clkdev_add_pmu("ltq_pcie", "msi", 1, PMU1_PCIE_MSI);
++ clkdev_add_pmu("ltq_pcie", "pdi", 1, PMU1_PCIE_PDI);
++ clkdev_add_pmu("ltq_pcie", "ctl", 1, PMU1_PCIE_CTL);
++ clkdev_add_pmu("ltq_pcie", "ahb", 0, PMU_AHBM | PMU_AHBS);
+ } else {
+ clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
+ ltq_danube_io_region_clock());
+--
+1.7.9.1
+
+++ /dev/null
-From cab49331fac138102493dea8f1b1d8c28cae6db5 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 8 Mar 2012 11:44:55 +0100
-Subject: [PATCH 35/70] MIPS: lantiq: unify xway prom code
-
-The xway prom-ase.c and prom-xway.c files are redundant. Unify the 2 files.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/lantiq/xway/Makefile | 5 +--
- arch/mips/lantiq/xway/Makefile.rej | 11 -----
- arch/mips/lantiq/xway/prom-ase.c | 48 ----------------------
- arch/mips/lantiq/xway/prom-xway.c | 64 -----------------------------
- arch/mips/lantiq/xway/prom.c | 79 ++++++++++++++++++++++++++++++++++++
- 5 files changed, 80 insertions(+), 127 deletions(-)
- delete mode 100644 arch/mips/lantiq/xway/Makefile.rej
- delete mode 100644 arch/mips/lantiq/xway/prom-ase.c
- delete mode 100644 arch/mips/lantiq/xway/prom-xway.c
- create mode 100644 arch/mips/lantiq/xway/prom.c
-
---- a/arch/mips/lantiq/xway/Makefile
-+++ b/arch/mips/lantiq/xway/Makefile
-@@ -1,7 +1,4 @@
--obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o
--
--obj-$(CONFIG_SOC_XWAY) += prom-xway.o
--obj-$(CONFIG_SOC_AMAZON_SE) += prom-ase.o
-+obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o
-
- obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
- obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
---- a/arch/mips/lantiq/xway/Makefile.rej
-+++ /dev/null
-@@ -1,11 +0,0 @@
----- arch/mips/lantiq/xway/Makefile
--+++ arch/mips/lantiq/xway/Makefile
--@@ -1,7 +1,4 @@
---obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o
---
---obj-$(CONFIG_SOC_XWAY) += prom-xway.o
---obj-$(CONFIG_SOC_AMAZON_SE) += prom-ase.o
--+obj-y := prom.o sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o
--
-- obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
-- obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
---- a/arch/mips/lantiq/xway/prom-ase.c
-+++ /dev/null
-@@ -1,48 +0,0 @@
--/*
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- *
-- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
-- */
--
--#include <linux/export.h>
--#include <linux/clk.h>
--#include <asm/bootinfo.h>
--#include <asm/time.h>
--
--#include <lantiq_soc.h>
--
--#include "devices.h"
--#include "../prom.h"
--
--#define SOC_AMAZON_SE "Amazon_SE"
--
--#define PART_SHIFT 12
--#define PART_MASK 0x0FFFFFFF
--#define REV_SHIFT 28
--#define REV_MASK 0xF0000000
--
--void __init ltq_soc_detect(struct ltq_soc_info *i)
--{
-- i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
-- i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
-- sprintf(i->rev_type, "1.%d", i->rev);
-- switch (i->partnum) {
-- case SOC_ID_AMAZON_SE:
-- i->name = SOC_AMAZON_SE;
-- i->type = SOC_TYPE_AMAZON_SE;
-- break;
--
-- default:
-- unreachable();
-- break;
-- }
--}
--
--void __init ltq_soc_setup(void)
--{
-- ltq_register_ase_asc();
-- ltq_register_gpio();
-- ltq_register_wdt();
--}
---- a/arch/mips/lantiq/xway/prom-xway.c
-+++ /dev/null
-@@ -1,64 +0,0 @@
--/*
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- *
-- * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
-- */
--
--#include <linux/export.h>
--#include <linux/clk.h>
--#include <asm/bootinfo.h>
--#include <asm/time.h>
--
--#include <lantiq_soc.h>
--
--#include "devices.h"
--#include "../prom.h"
--
--#define SOC_DANUBE "Danube"
--#define SOC_TWINPASS "Twinpass"
--#define SOC_AR9 "AR9"
--
--#define PART_SHIFT 12
--#define PART_MASK 0x0FFFFFFF
--#define REV_SHIFT 28
--#define REV_MASK 0xF0000000
--
--void __init ltq_soc_detect(struct ltq_soc_info *i)
--{
-- i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
-- i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
-- sprintf(i->rev_type, "1.%d", i->rev);
-- switch (i->partnum) {
-- case SOC_ID_DANUBE1:
-- case SOC_ID_DANUBE2:
-- i->name = SOC_DANUBE;
-- i->type = SOC_TYPE_DANUBE;
-- break;
--
-- case SOC_ID_TWINPASS:
-- i->name = SOC_TWINPASS;
-- i->type = SOC_TYPE_DANUBE;
-- break;
--
-- case SOC_ID_ARX188:
-- case SOC_ID_ARX168:
-- case SOC_ID_ARX182:
-- i->name = SOC_AR9;
-- i->type = SOC_TYPE_AR9;
-- break;
--
-- default:
-- unreachable();
-- break;
-- }
--}
--
--void __init ltq_soc_setup(void)
--{
-- ltq_register_asc(0);
-- ltq_register_asc(1);
-- ltq_register_gpio();
-- ltq_register_wdt();
--}
---- /dev/null
-+++ b/arch/mips/lantiq/xway/prom.c
-@@ -0,0 +1,79 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/export.h>
-+#include <linux/clk.h>
-+#include <asm/bootinfo.h>
-+#include <asm/time.h>
-+
-+#include <lantiq_soc.h>
-+
-+#include "../prom.h"
-+#include "devices.h"
-+
-+#define SOC_DANUBE "Danube"
-+#define SOC_TWINPASS "Twinpass"
-+#define SOC_AR9 "AR9"
-+#define SOC_VR9 "VR9"
-+
-+#define PART_SHIFT 12
-+#define PART_MASK 0x0FFFFFFF
-+#define REV_SHIFT 28
-+#define REV_MASK 0xF0000000
-+
-+#define SOC_AMAZON_SE "Amazon_SE"
-+
-+void __init ltq_soc_detect(struct ltq_soc_info *i)
-+{
-+ i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
-+ i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
-+ sprintf(i->rev_type, "1.%d", i->rev);
-+ switch (i->partnum) {
-+ case SOC_ID_DANUBE1:
-+ case SOC_ID_DANUBE2:
-+ i->name = SOC_DANUBE;
-+ i->type = SOC_TYPE_DANUBE;
-+ break;
-+
-+ case SOC_ID_TWINPASS:
-+ i->name = SOC_TWINPASS;
-+ i->type = SOC_TYPE_DANUBE;
-+ break;
-+
-+ case SOC_ID_ARX188:
-+ case SOC_ID_ARX168:
-+ case SOC_ID_ARX182:
-+ i->name = SOC_AR9;
-+ i->type = SOC_TYPE_AR9;
-+ break;
-+
-+ case SOC_ID_AMAZON_SE:
-+ i->name = SOC_AMAZON_SE;
-+ i->type = SOC_TYPE_AMAZON_SE;
-+#ifdef CONFIG_PCI
-+ panic("ase is only supported for non pci kernels");
-+#endif
-+ break;
-+
-+ default:
-+ unreachable();
-+ break;
-+ }
-+}
-+
-+void __init ltq_soc_setup(void)
-+{
-+ if (ltq_is_ase()) {
-+ ltq_register_ase_asc();
-+ } else {
-+ ltq_register_asc(0);
-+ ltq_register_asc(1);
-+ }
-+ ltq_register_gpio();
-+ ltq_register_wdt();
-+}
--- /dev/null
+From da466512e536083352dcefd9ddbfd95a9c60b464 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 21 Feb 2012 21:09:01 +0100
+Subject: [PATCH 36/73] MIPS: lantiq: add ipi handlers to make vsmp work
+
+Add IPI handlers to the interrupt code. This patch makes MIPS_MT_SMP work
+on lantiq SoCs.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/lantiq/irq.c | 61 +++++++++++++++++++++++++++++++++++++++++++++++
+ arch/mips/lantiq/prom.c | 5 ++++
+ 2 files changed, 66 insertions(+), 0 deletions(-)
+
+diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
+index 0b2ed87..770a10c 100644
+--- a/arch/mips/lantiq/irq.c
++++ b/arch/mips/lantiq/irq.c
+@@ -9,6 +9,7 @@
+
+ #include <linux/interrupt.h>
+ #include <linux/ioport.h>
++#include <linux/sched.h>
+
+ #include <asm/bootinfo.h>
+ #include <asm/irq_cpu.h>
+@@ -54,6 +55,14 @@
+ #define ltq_eiu_w32(x, y) ltq_w32((x), ltq_eiu_membase + (y))
+ #define ltq_eiu_r32(x) ltq_r32(ltq_eiu_membase + (x))
+
++/* our 2 ipi interrupts for VSMP */
++#define MIPS_CPU_IPI_RESCHED_IRQ 0
++#define MIPS_CPU_IPI_CALL_IRQ 1
++
++#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
++int gic_present;
++#endif
++
+ static unsigned short ltq_eiu_irq[MAX_EIU] = {
+ LTQ_EIU_IR0,
+ LTQ_EIU_IR1,
+@@ -219,6 +228,47 @@ static void ltq_hw5_irqdispatch(void)
+ do_IRQ(MIPS_CPU_TIMER_IRQ);
+ }
+
++#ifdef CONFIG_MIPS_MT_SMP
++void __init arch_init_ipiirq(int irq, struct irqaction *action)
++{
++ setup_irq(irq, action);
++ irq_set_handler(irq, handle_percpu_irq);
++}
++
++static void ltq_sw0_irqdispatch(void)
++{
++ do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ);
++}
++
++static void ltq_sw1_irqdispatch(void)
++{
++ do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ);
++}
++static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
++{
++ scheduler_ipi();
++ return IRQ_HANDLED;
++}
++
++static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
++{
++ smp_call_function_interrupt();
++ return IRQ_HANDLED;
++}
++
++static struct irqaction irq_resched = {
++ .handler = ipi_resched_interrupt,
++ .flags = IRQF_PERCPU,
++ .name = "IPI_resched"
++};
++
++static struct irqaction irq_call = {
++ .handler = ipi_call_interrupt,
++ .flags = IRQF_PERCPU,
++ .name = "IPI_call"
++};
++#endif
++
+ asmlinkage void plat_irq_dispatch(void)
+ {
+ unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+@@ -314,6 +364,17 @@ void __init arch_init_irq(void)
+ irq_set_chip_and_handler(i, <q_irq_type,
+ handle_level_irq);
+
++#if defined(CONFIG_MIPS_MT_SMP)
++ if (cpu_has_vint) {
++ pr_info("Setting up IPI vectored interrupts\n");
++ set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ltq_sw0_irqdispatch);
++ set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ltq_sw1_irqdispatch);
++ }
++ arch_init_ipiirq(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ,
++ &irq_resched);
++ arch_init_ipiirq(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ, &irq_call);
++#endif
++
+ #if !defined(CONFIG_MIPS_MT_SMP) && !defined(CONFIG_MIPS_MT_SMTC)
+ set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 |
+ IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
+diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
+index 971554b..00ad59c 100644
+--- a/arch/mips/lantiq/prom.c
++++ b/arch/mips/lantiq/prom.c
+@@ -108,4 +108,9 @@ void __init prom_init(void)
+ soc_info.sys_type[LTQ_SYS_TYPE_LEN - 1] = '\0';
+ pr_info("SoC: %s\n", soc_info.sys_type);
+ prom_init_cmdline();
++
++#if defined(CONFIG_MIPS_MT_SMP)
++ if (register_vsmp_smp_ops())
++ panic("failed to register_vsmp_smp_ops()");
++#endif
+ }
+--
+1.7.9.1
+
+++ /dev/null
-From 27c4128ab1835a2aff1a0ce6413bb21cfa614d93 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 21 Feb 2012 09:48:11 +0100
-Subject: [PATCH 36/70] MIPS: lantiq: add vr9 support
-
-VR9 is a VDSL SoC made by Lantiq. It is very similar to the AR9.
-This patch adds the clkdev init code and SoC detection for the VR9.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
----
- .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 3 +
- arch/mips/lantiq/xway/clk.c | 83 ++++++++++++++++++++
- arch/mips/lantiq/xway/prom.c | 6 ++
- arch/mips/lantiq/xway/sysctrl.c | 12 +++-
- 4 files changed, 103 insertions(+), 1 deletions(-)
-
---- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-@@ -21,6 +21,9 @@
- #define SOC_ID_ARX188 0x16C
- #define SOC_ID_ARX168 0x16D
- #define SOC_ID_ARX182 0x16F
-+#define SOC_ID_VRX288 0x1C0 /* VRX288 v1.1 */
-+#define SOC_ID_VRX268 0x1C2 /* VRX268 v1.1 */
-+#define SOC_ID_GRX288 0x1C9 /* GRX288 v1.1 */
-
- /* SoC Types */
- #define SOC_TYPE_DANUBE 0x01
---- a/arch/mips/lantiq/xway/clk.c
-+++ b/arch/mips/lantiq/xway/clk.c
-@@ -225,3 +225,86 @@ unsigned long ltq_danube_fpi_hz(void)
- return ddr_clock >> 1;
- return ddr_clock;
- }
-+
-+unsigned long ltq_vr9_cpu_hz(void)
-+{
-+ unsigned int cpu_sel;
-+ unsigned long clk;
-+
-+ cpu_sel = (ltq_cgu_r32(LTQ_CGU_SYS_VR9) >> 4) & 0xf;
-+
-+ switch (cpu_sel) {
-+ case 0:
-+ clk = CLOCK_600M;
-+ break;
-+ case 1:
-+ clk = CLOCK_500M;
-+ break;
-+ case 2:
-+ clk = CLOCK_393M;
-+ break;
-+ case 3:
-+ clk = CLOCK_333M;
-+ break;
-+ case 5:
-+ case 6:
-+ clk = CLOCK_196_608M;
-+ break;
-+ case 7:
-+ clk = CLOCK_167M;
-+ break;
-+ case 4:
-+ case 8:
-+ case 9:
-+ clk = CLOCK_125M;
-+ break;
-+ default:
-+ clk = 0;
-+ break;
-+ }
-+
-+ return clk;
-+}
-+
-+unsigned long ltq_vr9_fpi_hz(void)
-+{
-+ unsigned int ocp_sel, cpu_clk;
-+ unsigned long clk;
-+
-+ cpu_clk = ltq_vr9_cpu_hz();
-+ ocp_sel = ltq_cgu_r32(LTQ_CGU_SYS_VR9) & 0x3;
-+
-+ switch (ocp_sel) {
-+ case 0:
-+ /* OCP ratio 1 */
-+ clk = cpu_clk;
-+ break;
-+ case 2:
-+ /* OCP ratio 2 */
-+ clk = cpu_clk / 2;
-+ break;
-+ case 3:
-+ /* OCP ratio 2.5 */
-+ clk = (cpu_clk * 2) / 5;
-+ break;
-+ case 4:
-+ /* OCP ratio 3 */
-+ clk = cpu_clk / 3;
-+ break;
-+ default:
-+ clk = 0;
-+ break;
-+ }
-+
-+ return clk;
-+}
-+
-+unsigned long ltq_vr9_io_region_clock(void)
-+{
-+ return ltq_vr9_fpi_hz();
-+}
-+
-+unsigned long ltq_vr9_fpi_bus_clock(int fpi)
-+{
-+ return ltq_vr9_fpi_hz();
-+}
---- a/arch/mips/lantiq/xway/prom.c
-+++ b/arch/mips/lantiq/xway/prom.c
-@@ -60,6 +60,12 @@ void __init ltq_soc_detect(struct ltq_so
- #endif
- break;
-
-+ case SOC_ID_VRX268:
-+ case SOC_ID_VRX288:
-+ i->name = SOC_VR9;
-+ i->type = SOC_TYPE_VR9;
-+ break;
-+
- default:
- unreachable();
- break;
---- a/arch/mips/lantiq/xway/sysctrl.c
-+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -147,7 +147,8 @@ void __init ltq_soc_init(void)
- clkdev_add_pmu("ltq_dma", NULL, 0, PMU_DMA);
- clkdev_add_pmu("ltq_stp", NULL, 0, PMU_STP);
- clkdev_add_pmu("ltq_spi", NULL, 0, PMU_SPI);
-- clkdev_add_pmu("ltq_etop", NULL, 0, PMU_PPE);
-+ if (!ltq_is_vr9())
-+ clkdev_add_pmu("ltq_etop", NULL, 0, PMU_PPE);
- if (ltq_is_ase()) {
- if (ltq_cgu_r32(LTQ_CGU_SYS) & (1 << 5))
- clkdev_add_static(CLOCK_266M, CLOCK_133M, CLOCK_133M);
-@@ -155,6 +156,15 @@ void __init ltq_soc_init(void)
- clkdev_add_static(CLOCK_133M, CLOCK_133M, CLOCK_133M);
- clkdev_add_cgu("ltq_etop", "ephycgu", CGU_EPHY),
- clkdev_add_pmu("ltq_etop", "ephy", 0, PMU_EPHY);
-+ } else if (ltq_is_vr9()) {
-+ clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(),
-+ ltq_vr9_io_region_clock());
-+ clkdev_add_pmu("ltq_pcie", "phy", 1, PMU1_PCIE_PHY);
-+ clkdev_add_pmu("ltq_pcie", "bus", 0, PMU_PCIE_CLK);
-+ clkdev_add_pmu("ltq_pcie", "msi", 1, PMU1_PCIE_MSI);
-+ clkdev_add_pmu("ltq_pcie", "pdi", 1, PMU1_PCIE_PDI);
-+ clkdev_add_pmu("ltq_pcie", "ctl", 1, PMU1_PCIE_CTL);
-+ clkdev_add_pmu("ltq_pcie", "ahb", 0, PMU_AHBM | PMU_AHBS);
- } else {
- clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
- ltq_danube_io_region_clock());
--- /dev/null
+From 5585147ea9462778decc7146667ac54413acd91f Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 12 Mar 2012 15:23:39 +0100
+Subject: [PATCH 37/73] MIPS: lantiq: add additional soc ids
+
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 38 +++++++++++++++----
+ arch/mips/lantiq/xway/prom.c | 35 ++++++++++++++++--
+ 2 files changed, 61 insertions(+), 12 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index 5d11eb7..3f22acb 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -17,20 +17,32 @@
+ #define SOC_ID_DANUBE1 0x129
+ #define SOC_ID_DANUBE2 0x12B
+ #define SOC_ID_TWINPASS 0x12D
+-#define SOC_ID_AMAZON_SE 0x152
++#define SOC_ID_AMAZON_SE_1 0x152 /* 50601 */
++#define SOC_ID_AMAZON_SE_2 0x153 /* 50600 */
+ #define SOC_ID_ARX188 0x16C
+-#define SOC_ID_ARX168 0x16D
++#define SOC_ID_ARX168_1 0x16D
++#define SOC_ID_ARX168_2 0x16E
+ #define SOC_ID_ARX182 0x16F
+-#define SOC_ID_VRX288 0x1C0 /* VRX288 v1.1 */
+-#define SOC_ID_VRX268 0x1C2 /* VRX268 v1.1 */
+-#define SOC_ID_GRX288 0x1C9 /* GRX288 v1.1 */
++#define SOC_ID_GRX188 0x170
++#define SOC_ID_GRX168 0x171
++
++#define SOC_ID_VRX288 0x1C0 /* v1.1 */
++#define SOC_ID_VRX282 0x1C1 /* v1.1 */
++#define SOC_ID_VRX268 0x1C2 /* v1.1 */
++#define SOC_ID_GRX268 0x1C8 /* v1.1 */
++#define SOC_ID_GRX288 0x1C9 /* v1.1 */
++#define SOC_ID_VRX288_2 0x00B /* v1.2 */
++#define SOC_ID_VRX268_2 0x00C /* v1.2 */
++#define SOC_ID_GRX288_2 0x00D /* v1.2 */
++#define SOC_ID_GRX282_2 0x00E /* v1.2 */
+
+ /* SoC Types */
+ #define SOC_TYPE_DANUBE 0x01
+ #define SOC_TYPE_TWINPASS 0x02
+ #define SOC_TYPE_AR9 0x03
+-#define SOC_TYPE_VR9 0x04
+-#define SOC_TYPE_AMAZON_SE 0x05
++#define SOC_TYPE_VR9_1 0x04 /* v1.1 */
++#define SOC_TYPE_VR9_2 0x05 /* v1.2 */
++#define SOC_TYPE_AMAZON_SE 0x06
+
+ /* ASC0/1 - serial port */
+ #define LTQ_ASC0_BASE_ADDR 0x1E100400
+@@ -149,9 +161,19 @@ static inline int ltq_is_ar9(void)
+ return (ltq_get_soc_type() == SOC_TYPE_AR9);
+ }
+
++static inline int ltq_is_vr9_1(void)
++{
++ return (ltq_get_soc_type() == SOC_TYPE_VR9_1);
++}
++
++static inline int ltq_is_vr9_2(void)
++{
++ return (ltq_get_soc_type() == SOC_TYPE_VR9_2);
++}
++
+ static inline int ltq_is_vr9(void)
+ {
+- return (ltq_get_soc_type() == SOC_TYPE_VR9);
++ return (ltq_is_vr9_1() || ltq_is_vr9_2());
+ }
+
+ static inline int ltq_is_falcon(void)
+diff --git a/arch/mips/lantiq/xway/prom.c b/arch/mips/lantiq/xway/prom.c
+index b6f56b7..e3dcbbd 100644
+--- a/arch/mips/lantiq/xway/prom.c
++++ b/arch/mips/lantiq/xway/prom.c
+@@ -18,7 +18,9 @@
+
+ #define SOC_DANUBE "Danube"
+ #define SOC_TWINPASS "Twinpass"
++#define SOC_AMAZON_SE "Amazon_SE"
+ #define SOC_AR9 "AR9"
++#define SOC_GR9 "GR9"
+ #define SOC_VR9 "VR9"
+
+ #define PART_SHIFT 12
+@@ -26,7 +28,6 @@
+ #define REV_SHIFT 28
+ #define REV_MASK 0xF0000000
+
+-#define SOC_AMAZON_SE "Amazon_SE"
+
+ void __init ltq_soc_detect(struct ltq_soc_info *i)
+ {
+@@ -46,13 +47,21 @@ void __init ltq_soc_detect(struct ltq_soc_info *i)
+ break;
+
+ case SOC_ID_ARX188:
+- case SOC_ID_ARX168:
++ case SOC_ID_ARX168_1:
++ case SOC_ID_ARX168_2:
+ case SOC_ID_ARX182:
+ i->name = SOC_AR9;
+ i->type = SOC_TYPE_AR9;
+ break;
+
+- case SOC_ID_AMAZON_SE:
++ case SOC_ID_GRX188:
++ case SOC_ID_GRX168:
++ i->name = SOC_GR9;
++ i->type = SOC_TYPE_AR9;
++ break;
++
++ case SOC_ID_AMAZON_SE_1:
++ case SOC_ID_AMAZON_SE_2:
+ i->name = SOC_AMAZON_SE;
+ i->type = SOC_TYPE_AMAZON_SE;
+ #ifdef CONFIG_PCI
+@@ -60,12 +69,30 @@ void __init ltq_soc_detect(struct ltq_soc_info *i)
+ #endif
+ break;
+
++ case SOC_ID_VRX282:
+ case SOC_ID_VRX268:
+ case SOC_ID_VRX288:
+ i->name = SOC_VR9;
+- i->type = SOC_TYPE_VR9;
++ i->type = SOC_TYPE_VR9_1;
+ break;
+
++ case SOC_ID_GRX268:
++ case SOC_ID_GRX288:
++ i->name = SOC_GR9;
++ i->type = SOC_TYPE_VR9_1;
++ break;
++
++ case SOC_ID_VRX268_2:
++ case SOC_ID_VRX288_2:
++ i->name = SOC_VR9;
++ i->type = SOC_TYPE_VR9_2;
++ break;
++
++ case SOC_ID_GRX282_2:
++ case SOC_ID_GRX288_2:
++ i->name = SOC_GR9;
++ i->type = SOC_TYPE_VR9_2;
++
+ default:
+ unreachable();
+ break;
+--
+1.7.9.1
+
+++ /dev/null
-From 58d1ae79d144e6725a68fab99ef6a9b20b25a765 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 21 Feb 2012 21:09:01 +0100
-Subject: [PATCH 37/70] MIPS: lantiq: add ipi handlers to make vsmp work
-
-Add IPI handlers to the interrupt code. This patch makes MIPS_MT_SMP work
-on lantiq SoCs.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/lantiq/irq.c | 61 +++++++++++++++++++++++++++++++++++++++++++++++
- arch/mips/lantiq/prom.c | 5 ++++
- 2 files changed, 66 insertions(+), 0 deletions(-)
-
---- a/arch/mips/lantiq/irq.c
-+++ b/arch/mips/lantiq/irq.c
-@@ -9,6 +9,7 @@
-
- #include <linux/interrupt.h>
- #include <linux/ioport.h>
-+#include <linux/sched.h>
-
- #include <asm/bootinfo.h>
- #include <asm/irq_cpu.h>
-@@ -54,6 +55,14 @@
- #define ltq_eiu_w32(x, y) ltq_w32((x), ltq_eiu_membase + (y))
- #define ltq_eiu_r32(x) ltq_r32(ltq_eiu_membase + (x))
-
-+/* our 2 ipi interrupts for VSMP */
-+#define MIPS_CPU_IPI_RESCHED_IRQ 0
-+#define MIPS_CPU_IPI_CALL_IRQ 1
-+
-+#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
-+int gic_present;
-+#endif
-+
- static unsigned short ltq_eiu_irq[MAX_EIU] = {
- LTQ_EIU_IR0,
- LTQ_EIU_IR1,
-@@ -219,6 +228,47 @@ static void ltq_hw5_irqdispatch(void)
- do_IRQ(MIPS_CPU_TIMER_IRQ);
- }
-
-+#ifdef CONFIG_MIPS_MT_SMP
-+void __init arch_init_ipiirq(int irq, struct irqaction *action)
-+{
-+ setup_irq(irq, action);
-+ irq_set_handler(irq, handle_percpu_irq);
-+}
-+
-+static void ltq_sw0_irqdispatch(void)
-+{
-+ do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ);
-+}
-+
-+static void ltq_sw1_irqdispatch(void)
-+{
-+ do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ);
-+}
-+static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
-+{
-+ scheduler_ipi();
-+ return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
-+{
-+ smp_call_function_interrupt();
-+ return IRQ_HANDLED;
-+}
-+
-+static struct irqaction irq_resched = {
-+ .handler = ipi_resched_interrupt,
-+ .flags = IRQF_PERCPU,
-+ .name = "IPI_resched"
-+};
-+
-+static struct irqaction irq_call = {
-+ .handler = ipi_call_interrupt,
-+ .flags = IRQF_PERCPU,
-+ .name = "IPI_call"
-+};
-+#endif
-+
- asmlinkage void plat_irq_dispatch(void)
- {
- unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
-@@ -314,6 +364,17 @@ void __init arch_init_irq(void)
- irq_set_chip_and_handler(i, <q_irq_type,
- handle_level_irq);
-
-+#if defined(CONFIG_MIPS_MT_SMP)
-+ if (cpu_has_vint) {
-+ pr_info("Setting up IPI vectored interrupts\n");
-+ set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ltq_sw0_irqdispatch);
-+ set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ltq_sw1_irqdispatch);
-+ }
-+ arch_init_ipiirq(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ,
-+ &irq_resched);
-+ arch_init_ipiirq(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ, &irq_call);
-+#endif
-+
- #if !defined(CONFIG_MIPS_MT_SMP) && !defined(CONFIG_MIPS_MT_SMTC)
- set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 |
- IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
---- a/arch/mips/lantiq/prom.c
-+++ b/arch/mips/lantiq/prom.c
-@@ -108,4 +108,9 @@ void __init prom_init(void)
- soc_info.sys_type[LTQ_SYS_TYPE_LEN - 1] = '\0';
- pr_info("SoC: %s\n", soc_info.sys_type);
- prom_init_cmdline();
-+
-+#if defined(CONFIG_MIPS_MT_SMP)
-+ if (register_vsmp_smp_ops())
-+ panic("failed to register_vsmp_smp_ops()");
-+#endif
- }
+++ /dev/null
-From 655f264da58e9e49d61bf26374f877e2175125e4 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 12 Mar 2012 15:23:39 +0100
-Subject: [PATCH 38/70] MIPS: lantiq: add additional soc ids
-
----
- .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 38 +++++++++++++++----
- arch/mips/lantiq/xway/prom.c | 35 ++++++++++++++++--
- 2 files changed, 61 insertions(+), 12 deletions(-)
-
---- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-@@ -17,20 +17,32 @@
- #define SOC_ID_DANUBE1 0x129
- #define SOC_ID_DANUBE2 0x12B
- #define SOC_ID_TWINPASS 0x12D
--#define SOC_ID_AMAZON_SE 0x152
-+#define SOC_ID_AMAZON_SE_1 0x152 /* 50601 */
-+#define SOC_ID_AMAZON_SE_2 0x153 /* 50600 */
- #define SOC_ID_ARX188 0x16C
--#define SOC_ID_ARX168 0x16D
-+#define SOC_ID_ARX168_1 0x16D
-+#define SOC_ID_ARX168_2 0x16E
- #define SOC_ID_ARX182 0x16F
--#define SOC_ID_VRX288 0x1C0 /* VRX288 v1.1 */
--#define SOC_ID_VRX268 0x1C2 /* VRX268 v1.1 */
--#define SOC_ID_GRX288 0x1C9 /* GRX288 v1.1 */
-+#define SOC_ID_GRX188 0x170
-+#define SOC_ID_GRX168 0x171
-+
-+#define SOC_ID_VRX288 0x1C0 /* v1.1 */
-+#define SOC_ID_VRX282 0x1C1 /* v1.1 */
-+#define SOC_ID_VRX268 0x1C2 /* v1.1 */
-+#define SOC_ID_GRX268 0x1C8 /* v1.1 */
-+#define SOC_ID_GRX288 0x1C9 /* v1.1 */
-+#define SOC_ID_VRX288_2 0x00B /* v1.2 */
-+#define SOC_ID_VRX268_2 0x00C /* v1.2 */
-+#define SOC_ID_GRX288_2 0x00D /* v1.2 */
-+#define SOC_ID_GRX282_2 0x00E /* v1.2 */
-
- /* SoC Types */
- #define SOC_TYPE_DANUBE 0x01
- #define SOC_TYPE_TWINPASS 0x02
- #define SOC_TYPE_AR9 0x03
--#define SOC_TYPE_VR9 0x04
--#define SOC_TYPE_AMAZON_SE 0x05
-+#define SOC_TYPE_VR9_1 0x04 /* v1.1 */
-+#define SOC_TYPE_VR9_2 0x05 /* v1.2 */
-+#define SOC_TYPE_AMAZON_SE 0x06
-
- /* ASC0/1 - serial port */
- #define LTQ_ASC0_BASE_ADDR 0x1E100400
-@@ -149,9 +161,19 @@ static inline int ltq_is_ar9(void)
- return (ltq_get_soc_type() == SOC_TYPE_AR9);
- }
-
-+static inline int ltq_is_vr9_1(void)
-+{
-+ return (ltq_get_soc_type() == SOC_TYPE_VR9_1);
-+}
-+
-+static inline int ltq_is_vr9_2(void)
-+{
-+ return (ltq_get_soc_type() == SOC_TYPE_VR9_2);
-+}
-+
- static inline int ltq_is_vr9(void)
- {
-- return (ltq_get_soc_type() == SOC_TYPE_VR9);
-+ return (ltq_is_vr9_1() || ltq_is_vr9_2());
- }
-
- static inline int ltq_is_falcon(void)
---- a/arch/mips/lantiq/xway/prom.c
-+++ b/arch/mips/lantiq/xway/prom.c
-@@ -18,7 +18,9 @@
-
- #define SOC_DANUBE "Danube"
- #define SOC_TWINPASS "Twinpass"
-+#define SOC_AMAZON_SE "Amazon_SE"
- #define SOC_AR9 "AR9"
-+#define SOC_GR9 "GR9"
- #define SOC_VR9 "VR9"
-
- #define PART_SHIFT 12
-@@ -26,7 +28,6 @@
- #define REV_SHIFT 28
- #define REV_MASK 0xF0000000
-
--#define SOC_AMAZON_SE "Amazon_SE"
-
- void __init ltq_soc_detect(struct ltq_soc_info *i)
- {
-@@ -46,13 +47,21 @@ void __init ltq_soc_detect(struct ltq_so
- break;
-
- case SOC_ID_ARX188:
-- case SOC_ID_ARX168:
-+ case SOC_ID_ARX168_1:
-+ case SOC_ID_ARX168_2:
- case SOC_ID_ARX182:
- i->name = SOC_AR9;
- i->type = SOC_TYPE_AR9;
- break;
-
-- case SOC_ID_AMAZON_SE:
-+ case SOC_ID_GRX188:
-+ case SOC_ID_GRX168:
-+ i->name = SOC_GR9;
-+ i->type = SOC_TYPE_AR9;
-+ break;
-+
-+ case SOC_ID_AMAZON_SE_1:
-+ case SOC_ID_AMAZON_SE_2:
- i->name = SOC_AMAZON_SE;
- i->type = SOC_TYPE_AMAZON_SE;
- #ifdef CONFIG_PCI
-@@ -60,12 +69,30 @@ void __init ltq_soc_detect(struct ltq_so
- #endif
- break;
-
-+ case SOC_ID_VRX282:
- case SOC_ID_VRX268:
- case SOC_ID_VRX288:
- i->name = SOC_VR9;
-- i->type = SOC_TYPE_VR9;
-+ i->type = SOC_TYPE_VR9_1;
- break;
-
-+ case SOC_ID_GRX268:
-+ case SOC_ID_GRX288:
-+ i->name = SOC_GR9;
-+ i->type = SOC_TYPE_VR9_1;
-+ break;
-+
-+ case SOC_ID_VRX268_2:
-+ case SOC_ID_VRX288_2:
-+ i->name = SOC_VR9;
-+ i->type = SOC_TYPE_VR9_2;
-+ break;
-+
-+ case SOC_ID_GRX282_2:
-+ case SOC_ID_GRX288_2:
-+ i->name = SOC_GR9;
-+ i->type = SOC_TYPE_VR9_2;
-+
- default:
- unreachable();
- break;
--- /dev/null
+From addbb26930d41b35e329d0ad6413cc8d087aa4cc Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 27 Aug 2011 18:12:26 +0200
+Subject: [PATCH 38/73] SPI: MIPS: lantiq: add FALC-ON spi driver
+
+The external bus unit (EBU) found on the FALC-ON SoC has spi emulation that is
+designed for serial flash access. This driver has only been tested with m25p80
+type chips. The hardware has no support for other types of spi peripherals.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: spi-devel-general@lists.sourceforge.net
+---
+ arch/mips/lantiq/falcon/devices.c | 13 +
+ arch/mips/lantiq/falcon/devices.h | 4 +
+ arch/mips/lantiq/falcon/mach-easy98000.c | 27 ++
+ drivers/spi/Kconfig | 4 +
+ drivers/spi/Makefile | 1 +
+ drivers/spi/spi-falcon.c | 483 ++++++++++++++++++++++++++++++
+ 6 files changed, 532 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/spi/spi-falcon.c
+
+diff --git a/arch/mips/lantiq/falcon/devices.c b/arch/mips/lantiq/falcon/devices.c
+index 6cd7a88..92ec571 100644
+--- a/arch/mips/lantiq/falcon/devices.c
++++ b/arch/mips/lantiq/falcon/devices.c
+@@ -121,3 +121,16 @@ falcon_register_gpio_extra(void)
+ platform_device_register_simple("falcon_gpio", 4,
+ falcon_gpio4_res, ARRAY_SIZE(falcon_gpio4_res));
+ }
++
++/* spi flash */
++static struct platform_device ltq_spi = {
++ .name = "falcon_spi",
++ .num_resources = 0,
++};
++
++void __init
++falcon_register_spi_flash(struct spi_board_info *data)
++{
++ spi_register_board_info(data, 1);
++ platform_device_register(<q_spi);
++}
+diff --git a/arch/mips/lantiq/falcon/devices.h b/arch/mips/lantiq/falcon/devices.h
+index 18be8b6..5e6f720 100644
+--- a/arch/mips/lantiq/falcon/devices.h
++++ b/arch/mips/lantiq/falcon/devices.h
+@@ -11,10 +11,14 @@
+ #ifndef _FALCON_DEVICES_H__
+ #define _FALCON_DEVICES_H__
+
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++
+ #include "../devices.h"
+
+ extern void falcon_register_nand(void);
+ extern void falcon_register_gpio(void);
+ extern void falcon_register_gpio_extra(void);
++extern void falcon_register_spi_flash(struct spi_board_info *data);
+
+ #endif
+diff --git a/arch/mips/lantiq/falcon/mach-easy98000.c b/arch/mips/lantiq/falcon/mach-easy98000.c
+index 361b8f0..1a7caad 100644
+--- a/arch/mips/lantiq/falcon/mach-easy98000.c
++++ b/arch/mips/lantiq/falcon/mach-easy98000.c
+@@ -40,6 +40,21 @@ struct physmap_flash_data easy98000_nor_flash_data = {
+ .parts = easy98000_nor_partitions,
+ };
+
++static struct flash_platform_data easy98000_spi_flash_platform_data = {
++ .name = "sflash",
++ .parts = easy98000_nor_partitions,
++ .nr_parts = ARRAY_SIZE(easy98000_nor_partitions)
++};
++
++static struct spi_board_info easy98000_spi_flash_data __initdata = {
++ .modalias = "m25p80",
++ .bus_num = 0,
++ .chip_select = 0,
++ .max_speed_hz = 10 * 1000 * 1000,
++ .mode = SPI_MODE_3,
++ .platform_data = &easy98000_spi_flash_platform_data
++};
++
+ /* setup gpio based spi bus/device for access to the eeprom on the board */
+ #define SPI_GPIO_MRST 102
+ #define SPI_GPIO_MTSR 103
+@@ -93,6 +108,13 @@ easy98000_init(void)
+ }
+
+ static void __init
++easy98000sf_init(void)
++{
++ easy98000_init_common();
++ falcon_register_spi_flash(&easy98000_spi_flash_data);
++}
++
++static void __init
+ easy98000nand_init(void)
+ {
+ easy98000_init_common();
+@@ -104,6 +126,11 @@ MIPS_MACHINE(LANTIQ_MACH_EASY98000,
+ "EASY98000 Eval Board",
+ easy98000_init);
+
++MIPS_MACHINE(LANTIQ_MACH_EASY98000SF,
++ "EASY98000SF",
++ "EASY98000 Eval Board (Serial Flash)",
++ easy98000sf_init);
++
+ MIPS_MACHINE(LANTIQ_MACH_EASY98000NAND,
+ "EASY98000NAND",
+ "EASY98000 Eval Board (NAND Flash)",
+diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
+index 8ba4510..b8424ba 100644
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -180,6 +180,10 @@ config SPI_MPC52xx
+ This drivers supports the MPC52xx SPI controller in master SPI
+ mode.
+
++config SPI_FALCON
++ tristate "Falcon SPI controller support"
++ depends on SOC_FALCON
++
+ config SPI_MPC52xx_PSC
+ tristate "Freescale MPC52xx PSC SPI controller"
+ depends on PPC_MPC52xx && EXPERIMENTAL
+diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
+index 61c3261..570894c 100644
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -25,6 +25,7 @@ obj-$(CONFIG_SPI_DW_MMIO) += spi-dw-mmio.o
+ obj-$(CONFIG_SPI_DW_PCI) += spi-dw-midpci.o
+ spi-dw-midpci-objs := spi-dw-pci.o spi-dw-mid.o
+ obj-$(CONFIG_SPI_EP93XX) += spi-ep93xx.o
++obj-$(CONFIG_SPI_FALCON) += spi-falcon.o
+ obj-$(CONFIG_SPI_FSL_LIB) += spi-fsl-lib.o
+ obj-$(CONFIG_SPI_FSL_ESPI) += spi-fsl-espi.o
+ obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-spi.o
+diff --git a/drivers/spi/spi-falcon.c b/drivers/spi/spi-falcon.c
+new file mode 100644
+index 0000000..447bbaa
+--- /dev/null
++++ b/drivers/spi/spi-falcon.c
+@@ -0,0 +1,483 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
++ */
++
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/delay.h>
++#include <linux/workqueue.h>
++
++#include <lantiq_soc.h>
++
++#define DRV_NAME "falcon_spi"
++
++#define FALCON_SPI_XFER_BEGIN (1 << 0)
++#define FALCON_SPI_XFER_END (1 << 1)
++
++/* Bus Read Configuration Register0 */
++#define LTQ_BUSRCON0 0x00000010
++/* Bus Write Configuration Register0 */
++#define LTQ_BUSWCON0 0x00000018
++/* Serial Flash Configuration Register */
++#define LTQ_SFCON 0x00000080
++/* Serial Flash Time Register */
++#define LTQ_SFTIME 0x00000084
++/* Serial Flash Status Register */
++#define LTQ_SFSTAT 0x00000088
++/* Serial Flash Command Register */
++#define LTQ_SFCMD 0x0000008C
++/* Serial Flash Address Register */
++#define LTQ_SFADDR 0x00000090
++/* Serial Flash Data Register */
++#define LTQ_SFDATA 0x00000094
++/* Serial Flash I/O Control Register */
++#define LTQ_SFIO 0x00000098
++/* EBU Clock Control Register */
++#define LTQ_EBUCC 0x000000C4
++
++/* Dummy Phase Length */
++#define SFCMD_DUMLEN_OFFSET 16
++#define SFCMD_DUMLEN_MASK 0x000F0000
++/* Chip Select */
++#define SFCMD_CS_OFFSET 24
++#define SFCMD_CS_MASK 0x07000000
++/* field offset */
++#define SFCMD_ALEN_OFFSET 20
++#define SFCMD_ALEN_MASK 0x00700000
++/* SCK Rise-edge Position */
++#define SFTIME_SCKR_POS_OFFSET 8
++#define SFTIME_SCKR_POS_MASK 0x00000F00
++/* SCK Period */
++#define SFTIME_SCK_PER_OFFSET 0
++#define SFTIME_SCK_PER_MASK 0x0000000F
++/* SCK Fall-edge Position */
++#define SFTIME_SCKF_POS_OFFSET 12
++#define SFTIME_SCKF_POS_MASK 0x0000F000
++/* Device Size */
++#define SFCON_DEV_SIZE_A23_0 0x03000000
++#define SFCON_DEV_SIZE_MASK 0x0F000000
++/* Read Data Position */
++#define SFTIME_RD_POS_MASK 0x000F0000
++/* Data Output */
++#define SFIO_UNUSED_WD_MASK 0x0000000F
++/* Command Opcode mask */
++#define SFCMD_OPC_MASK 0x000000FF
++/* dlen bytes of data to write */
++#define SFCMD_DIR_WRITE 0x00000100
++/* Data Length offset */
++#define SFCMD_DLEN_OFFSET 9
++/* Command Error */
++#define SFSTAT_CMD_ERR 0x20000000
++/* Access Command Pending */
++#define SFSTAT_CMD_PEND 0x00400000
++/* Frequency set to 100MHz. */
++#define EBUCC_EBUDIV_SELF100 0x00000001
++/* Serial Flash */
++#define BUSRCON0_AGEN_SERIAL_FLASH 0xF0000000
++/* 8-bit multiplexed */
++#define BUSRCON0_PORTW_8_BIT_MUX 0x00000000
++/* Serial Flash */
++#define BUSWCON0_AGEN_SERIAL_FLASH 0xF0000000
++/* Chip Select after opcode */
++#define SFCMD_KEEP_CS_KEEP_SELECTED 0x00008000
++
++struct falcon_spi {
++ u32 sfcmd; /* for caching of opcode, direction, ... */
++ struct spi_master *master;
++};
++
++int
++falcon_spi_xfer(struct spi_device *spi,
++ struct spi_transfer *t,
++ unsigned long flags)
++{
++ struct device *dev = &spi->dev;
++ struct falcon_spi *priv = spi_master_get_devdata(spi->master);
++ const u8 *txp = t->tx_buf;
++ u8 *rxp = t->rx_buf;
++ unsigned int bytelen = ((8 * t->len + 7) / 8);
++ unsigned int len, alen, dumlen;
++ u32 val;
++ enum {
++ state_init,
++ state_command_prepare,
++ state_write,
++ state_read,
++ state_disable_cs,
++ state_end
++ } state = state_init;
++
++ do {
++ switch (state) {
++ case state_init: /* detect phase of upper layer sequence */
++ {
++ /* initial write ? */
++ if (flags & FALCON_SPI_XFER_BEGIN) {
++ if (!txp) {
++ dev_err(dev,
++ "BEGIN without tx data!\n");
++ return -1;
++ }
++ /*
++ * Prepare the parts of the sfcmd register,
++ * which should not
++ * change during a sequence!
++ * Only exception are the length fields,
++ * especially alen and dumlen.
++ */
++
++ priv->sfcmd = ((spi->chip_select
++ << SFCMD_CS_OFFSET)
++ & SFCMD_CS_MASK);
++ priv->sfcmd |= SFCMD_KEEP_CS_KEEP_SELECTED;
++ priv->sfcmd |= *txp;
++ txp++;
++ bytelen--;
++ if (bytelen) {
++ /*
++ * more data:
++ * maybe address and/or dummy
++ */
++ state = state_command_prepare;
++ break;
++ } else {
++ dev_dbg(dev, "write cmd %02X\n",
++ priv->sfcmd & SFCMD_OPC_MASK);
++ }
++ }
++ /* continued write ? */
++ if (txp && bytelen) {
++ state = state_write;
++ break;
++ }
++ /* read data? */
++ if (rxp && bytelen) {
++ state = state_read;
++ break;
++ }
++ /* end of sequence? */
++ if (flags & FALCON_SPI_XFER_END)
++ state = state_disable_cs;
++ else
++ state = state_end;
++ break;
++ }
++ /* collect tx data for address and dummy phase */
++ case state_command_prepare:
++ {
++ /* txp is valid, already checked */
++ val = 0;
++ alen = 0;
++ dumlen = 0;
++ while (bytelen > 0) {
++ if (alen < 3) {
++ val = (val<<8)|(*txp++);
++ alen++;
++ } else if ((dumlen < 15) && (*txp == 0)) {
++ /*
++ * assume dummy bytes are set to 0
++ * from upper layer
++ */
++ dumlen++;
++ txp++;
++ } else
++ break;
++ bytelen--;
++ }
++ priv->sfcmd &= ~(SFCMD_ALEN_MASK | SFCMD_DUMLEN_MASK);
++ priv->sfcmd |= (alen << SFCMD_ALEN_OFFSET) |
++ (dumlen << SFCMD_DUMLEN_OFFSET);
++ if (alen > 0)
++ ltq_ebu_w32(val, LTQ_SFADDR);
++
++ dev_dbg(dev, "write cmd %02X, alen=%d "
++ "(addr=%06X) dumlen=%d\n",
++ priv->sfcmd & SFCMD_OPC_MASK,
++ alen, val, dumlen);
++
++ if (bytelen > 0) {
++ /* continue with write */
++ state = state_write;
++ } else if (flags & FALCON_SPI_XFER_END) {
++ /* end of sequence? */
++ state = state_disable_cs;
++ } else {
++ /*
++ * go to end and expect another
++ * call (read or write)
++ */
++ state = state_end;
++ }
++ break;
++ }
++ case state_write:
++ {
++ /* txp still valid */
++ priv->sfcmd |= SFCMD_DIR_WRITE;
++ len = 0;
++ val = 0;
++ do {
++ if (bytelen--)
++ val |= (*txp++) << (8 * len++);
++ if ((flags & FALCON_SPI_XFER_END)
++ && (bytelen == 0)) {
++ priv->sfcmd &=
++ ~SFCMD_KEEP_CS_KEEP_SELECTED;
++ }
++ if ((len == 4) || (bytelen == 0)) {
++ ltq_ebu_w32(val, LTQ_SFDATA);
++ ltq_ebu_w32(priv->sfcmd
++ | (len<<SFCMD_DLEN_OFFSET),
++ LTQ_SFCMD);
++ len = 0;
++ val = 0;
++ priv->sfcmd &= ~(SFCMD_ALEN_MASK
++ | SFCMD_DUMLEN_MASK);
++ }
++ } while (bytelen);
++ state = state_end;
++ break;
++ }
++ case state_read:
++ {
++ /* read data */
++ priv->sfcmd &= ~SFCMD_DIR_WRITE;
++ do {
++ if ((flags & FALCON_SPI_XFER_END)
++ && (bytelen <= 4)) {
++ priv->sfcmd &=
++ ~SFCMD_KEEP_CS_KEEP_SELECTED;
++ }
++ len = (bytelen > 4) ? 4 : bytelen;
++ bytelen -= len;
++ ltq_ebu_w32(priv->sfcmd
++ |(len<<SFCMD_DLEN_OFFSET), LTQ_SFCMD);
++ priv->sfcmd &= ~(SFCMD_ALEN_MASK
++ | SFCMD_DUMLEN_MASK);
++ do {
++ val = ltq_ebu_r32(LTQ_SFSTAT);
++ if (val & SFSTAT_CMD_ERR) {
++ /* reset error status */
++ dev_err(dev, "SFSTAT: CMD_ERR "
++ "(%x)\n", val);
++ ltq_ebu_w32(SFSTAT_CMD_ERR,
++ LTQ_SFSTAT);
++ return -1;
++ }
++ } while (val & SFSTAT_CMD_PEND);
++ val = ltq_ebu_r32(LTQ_SFDATA);
++ do {
++ *rxp = (val & 0xFF);
++ rxp++;
++ val >>= 8;
++ len--;
++ } while (len);
++ } while (bytelen);
++ state = state_end;
++ break;
++ }
++ case state_disable_cs:
++ {
++ priv->sfcmd &= ~SFCMD_KEEP_CS_KEEP_SELECTED;
++ ltq_ebu_w32(priv->sfcmd | (0 << SFCMD_DLEN_OFFSET),
++ LTQ_SFCMD);
++ val = ltq_ebu_r32(LTQ_SFSTAT);
++ if (val & SFSTAT_CMD_ERR) {
++ /* reset error status */
++ dev_err(dev, "SFSTAT: CMD_ERR (%x)\n", val);
++ ltq_ebu_w32(SFSTAT_CMD_ERR, LTQ_SFSTAT);
++ return -1;
++ }
++ state = state_end;
++ break;
++ }
++ case state_end:
++ break;
++ }
++ } while (state != state_end);
++
++ return 0;
++}
++
++static int
++falcon_spi_setup(struct spi_device *spi)
++{
++ struct device *dev = &spi->dev;
++ const u32 ebuclk = 100000000;
++ unsigned int i;
++ unsigned long flags;
++
++ dev_dbg(dev, "setup\n");
++
++ if (spi->master->bus_num > 0 || spi->chip_select > 0)
++ return -ENODEV;
++
++ spin_lock_irqsave(&ebu_lock, flags);
++
++ if (ebuclk < spi->max_speed_hz) {
++ /* set EBU clock to 100 MHz */
++ ltq_sys1_w32_mask(0, EBUCC_EBUDIV_SELF100, LTQ_EBUCC);
++ i = 1; /* divider */
++ } else {
++ /* set EBU clock to 50 MHz */
++ ltq_sys1_w32_mask(EBUCC_EBUDIV_SELF100, 0, LTQ_EBUCC);
++
++ /* search for suitable divider */
++ for (i = 1; i < 7; i++) {
++ if (ebuclk / i <= spi->max_speed_hz)
++ break;
++ }
++ }
++
++ /* setup period of serial clock */
++ ltq_ebu_w32_mask(SFTIME_SCKF_POS_MASK
++ | SFTIME_SCKR_POS_MASK
++ | SFTIME_SCK_PER_MASK,
++ (i << SFTIME_SCKR_POS_OFFSET)
++ | (i << (SFTIME_SCK_PER_OFFSET + 1)),
++ LTQ_SFTIME);
++
++ /*
++ * set some bits of unused_wd, to not trigger HOLD/WP
++ * signals on non QUAD flashes
++ */
++ ltq_ebu_w32((SFIO_UNUSED_WD_MASK & (0x8 | 0x4)), LTQ_SFIO);
++
++ ltq_ebu_w32(BUSRCON0_AGEN_SERIAL_FLASH | BUSRCON0_PORTW_8_BIT_MUX,
++ LTQ_BUSRCON0);
++ ltq_ebu_w32(BUSWCON0_AGEN_SERIAL_FLASH, LTQ_BUSWCON0);
++ /* set address wrap around to maximum for 24-bit addresses */
++ ltq_ebu_w32_mask(SFCON_DEV_SIZE_MASK, SFCON_DEV_SIZE_A23_0, LTQ_SFCON);
++
++ spin_unlock_irqrestore(&ebu_lock, flags);
++
++ return 0;
++}
++
++static int
++falcon_spi_transfer(struct spi_device *spi, struct spi_message *m)
++{
++ struct falcon_spi *priv = spi_master_get_devdata(spi->master);
++ struct spi_transfer *t;
++ unsigned long spi_flags;
++ unsigned long flags;
++ int ret = 0;
++
++ priv->sfcmd = 0;
++ m->actual_length = 0;
++
++ spi_flags = FALCON_SPI_XFER_BEGIN;
++ list_for_each_entry(t, &m->transfers, transfer_list) {
++ if (list_is_last(&t->transfer_list, &m->transfers))
++ spi_flags |= FALCON_SPI_XFER_END;
++
++ spin_lock_irqsave(&ebu_lock, flags);
++ ret = falcon_spi_xfer(spi, t, spi_flags);
++ spin_unlock_irqrestore(&ebu_lock, flags);
++
++ if (ret)
++ break;
++
++ m->actual_length += t->len;
++
++ if (t->delay_usecs || t->cs_change)
++ BUG();
++
++ spi_flags = 0;
++ }
++
++ m->status = ret;
++ m->complete(m->context);
++
++ return 0;
++}
++
++static void
++falcon_spi_cleanup(struct spi_device *spi)
++{
++ struct device *dev = &spi->dev;
++
++ dev_dbg(dev, "cleanup\n");
++}
++
++static int __devinit
++falcon_spi_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct falcon_spi *priv;
++ struct spi_master *master;
++ int ret;
++
++ dev_dbg(dev, "probing\n");
++
++ master = spi_alloc_master(&pdev->dev, sizeof(*priv));
++ if (!master) {
++ dev_err(dev, "no memory for spi_master\n");
++ return -ENOMEM;
++ }
++
++ priv = spi_master_get_devdata(master);
++ priv->master = master;
++
++ master->mode_bits = SPI_MODE_3;
++ master->num_chipselect = 1;
++ master->bus_num = 0;
++
++ master->setup = falcon_spi_setup;
++ master->transfer = falcon_spi_transfer;
++ master->cleanup = falcon_spi_cleanup;
++
++ platform_set_drvdata(pdev, priv);
++
++ ret = spi_register_master(master);
++ if (ret)
++ spi_master_put(master);
++
++ return ret;
++}
++
++static int __devexit
++falcon_spi_remove(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct falcon_spi *priv = platform_get_drvdata(pdev);
++
++ dev_dbg(dev, "removed\n");
++
++ spi_unregister_master(priv->master);
++
++ return 0;
++}
++
++static struct platform_driver falcon_spi_driver = {
++ .probe = falcon_spi_probe,
++ .remove = __devexit_p(falcon_spi_remove),
++ .driver = {
++ .name = DRV_NAME,
++ .owner = THIS_MODULE
++ }
++};
++
++static int __init
++falcon_spi_init(void)
++{
++ return platform_driver_register(&falcon_spi_driver);
++}
++
++static void __exit
++falcon_spi_exit(void)
++{
++ platform_driver_unregister(&falcon_spi_driver);
++}
++
++module_init(falcon_spi_init);
++module_exit(falcon_spi_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("Lantiq Falcon SPI controller driver");
+--
+1.7.9.1
+
--- /dev/null
+From 9732ec2d97f001961f670d12f342df9b70db27ea Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 4 Nov 2011 16:00:34 +0100
+Subject: [PATCH 39/73] I2C: MIPS: lantiq: add FALC-ON i2c bus master
+
+This patch adds the driver needed to make the I2C bus work on FALC-ON SoCs.
+
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: linux-i2c@vger.kernel.org
+---
+ .../include/asm/mach-lantiq/falcon/lantiq_soc.h | 5 +
+ arch/mips/lantiq/falcon/clk.c | 44 -
+ arch/mips/lantiq/falcon/devices.c | 16 +
+ arch/mips/lantiq/falcon/devices.h | 1 +
+ arch/mips/lantiq/falcon/mach-easy98000.c | 1 +
+ drivers/i2c/busses/Kconfig | 10 +
+ drivers/i2c/busses/Makefile | 1 +
+ drivers/i2c/busses/i2c-falcon.c | 1040 ++++++++++++++++++++
+ 8 files changed, 1074 insertions(+), 44 deletions(-)
+ delete mode 100644 arch/mips/lantiq/falcon/clk.c
+ create mode 100644 drivers/i2c/busses/i2c-falcon.c
+
+diff --git a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+index 120c56c..fff5ecd 100644
+--- a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
+@@ -72,6 +72,10 @@
+ #define LTQ_PADCTRL4_BASE_ADDR 0x1E800600
+ #define LTQ_PADCTRL4_SIZE 0x0100
+
++/* I2C */
++#define GPON_I2C_BASE 0x1E200000
++#define GPON_I2C_SIZE 0x00010000
++
+ /* CHIP ID */
+ #define LTQ_STATUS_BASE_ADDR 0x1E802000
+
+@@ -106,6 +110,7 @@
+ #define ACTS_PADCTRL2 0x00200000
+ #define ACTS_PADCTRL3 0x00200000
+ #define ACTS_PADCTRL4 0x00400000
++#define ACTS_I2C_ACT 0x00004000
+
+ /* global register ranges */
+ extern __iomem void *ltq_ebu_membase;
+diff --git a/arch/mips/lantiq/falcon/clk.c b/arch/mips/lantiq/falcon/clk.c
+deleted file mode 100644
+index afe1b52..0000000
+--- a/arch/mips/lantiq/falcon/clk.c
++++ /dev/null
+@@ -1,44 +0,0 @@
+-/*
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License version 2 as published
+- * by the Free Software Foundation.
+- *
+- * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
+- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+- */
+-
+-#include <linux/ioport.h>
+-#include <linux/export.h>
+-
+-#include <lantiq_soc.h>
+-
+-#include "devices.h"
+-
+-/* CPU0 Clock Control Register */
+-#define LTQ_SYS1_CPU0CC 0x0040
+-/* clock divider bit */
+-#define LTQ_CPU0CC_CPUDIV 0x0001
+-
+-unsigned int
+-ltq_get_io_region_clock(void)
+-{
+- return CLOCK_200M;
+-}
+-EXPORT_SYMBOL(ltq_get_io_region_clock);
+-
+-unsigned int
+-ltq_get_cpu_hz(void)
+-{
+- if (ltq_sys1_r32(LTQ_SYS1_CPU0CC) & LTQ_CPU0CC_CPUDIV)
+- return CLOCK_200M;
+- else
+- return CLOCK_400M;
+-}
+-EXPORT_SYMBOL(ltq_get_cpu_hz);
+-
+-unsigned int
+-ltq_get_fpi_hz(void)
+-{
+- return CLOCK_100M;
+-}
+-EXPORT_SYMBOL(ltq_get_fpi_hz);
+diff --git a/arch/mips/lantiq/falcon/devices.c b/arch/mips/lantiq/falcon/devices.c
+index 92ec571..e684ed4 100644
+--- a/arch/mips/lantiq/falcon/devices.c
++++ b/arch/mips/lantiq/falcon/devices.c
+@@ -134,3 +134,19 @@ falcon_register_spi_flash(struct spi_board_info *data)
+ spi_register_board_info(data, 1);
+ platform_device_register(<q_spi);
+ }
++
++/* i2c */
++static struct resource falcon_i2c_resources[] = {
++ MEM_RES("i2c", GPON_I2C_BASE, GPON_I2C_SIZE),
++ IRQ_RES(i2c_lb, FALCON_IRQ_I2C_LBREQ),
++ IRQ_RES(i2c_b, FALCON_IRQ_I2C_BREQ),
++ IRQ_RES(i2c_err, FALCON_IRQ_I2C_I2C_ERR),
++ IRQ_RES(i2c_p, FALCON_IRQ_I2C_I2C_P),
++};
++
++void __init
++falcon_register_i2c(void)
++{
++ platform_device_register_simple("i2c-falcon", 0,
++ falcon_i2c_resources, ARRAY_SIZE(falcon_i2c_resources));
++}
+diff --git a/arch/mips/lantiq/falcon/devices.h b/arch/mips/lantiq/falcon/devices.h
+index 5e6f720..d81edbe 100644
+--- a/arch/mips/lantiq/falcon/devices.h
++++ b/arch/mips/lantiq/falcon/devices.h
+@@ -20,5 +20,6 @@ extern void falcon_register_nand(void);
+ extern void falcon_register_gpio(void);
+ extern void falcon_register_gpio_extra(void);
+ extern void falcon_register_spi_flash(struct spi_board_info *data);
++extern void falcon_register_i2c(void);
+
+ #endif
+diff --git a/arch/mips/lantiq/falcon/mach-easy98000.c b/arch/mips/lantiq/falcon/mach-easy98000.c
+index 1a7caad..fc5720d 100644
+--- a/arch/mips/lantiq/falcon/mach-easy98000.c
++++ b/arch/mips/lantiq/falcon/mach-easy98000.c
+@@ -98,6 +98,7 @@ easy98000_init_common(void)
+ {
+ spi_register_board_info(&easy98000_spi_gpio_devices, 1);
+ platform_device_register(&easy98000_spi_gpio_device);
++ falcon_register_i2c();
+ }
+
+ static void __init
+diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
+index a3afac4..41be6cc 100644
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -369,6 +369,16 @@ config I2C_DESIGNWARE_PCI
+ This driver can also be built as a module. If so, the module
+ will be called i2c-designware-pci.
+
++config I2C_FALCON
++ tristate "Falcon I2C interface"
++ depends on SOC_FALCON
++ help
++ If you say yes to this option, support will be included for the
++ Lantiq FALC-ON I2C core.
++
++ This driver can also be built as a module. If so, the module
++ will be called i2c-falcon.
++
+ config I2C_GPIO
+ tristate "GPIO-based bitbanging I2C"
+ depends on GENERIC_GPIO
+diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
+index fba6da6..36239c8 100644
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -37,6 +37,7 @@ obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o
+ i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-core.o
+ obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o
+ i2c-designware-pci-objs := i2c-designware-pcidrv.o i2c-designware-core.o
++obj-$(CONFIG_I2C_FALCON) += i2c-falcon.o
+ obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
+ obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
+ obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
+diff --git a/drivers/i2c/busses/i2c-falcon.c b/drivers/i2c/busses/i2c-falcon.c
+new file mode 100644
+index 0000000..fc4f0eb
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-falcon.c
+@@ -0,0 +1,1040 @@
++/*
++ * Lantiq FALC(tm) ON - I2C bus adapter
++ *
++ * Parts based on i2c-designware.c and other i2c drivers from Linux 2.6.33
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
++ */
++
++/*
++ * CURRENT ISSUES:
++ * - no high speed support
++ * - supports only master mode
++ * - ten bit mode is not tested (no slave devices)
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/slab.h>
++#include <linux/i2c.h>
++#include <linux/clk.h>
++#include <linux/errno.h>
++#include <linux/sched.h>
++#include <linux/err.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/err.h>
++#include <linux/gpio.h>
++
++#include <lantiq_soc.h>
++
++/* I2C Identification Register */
++/* Module ID */
++#define I2C_ID_ID_MASK 0x0000FF00
++/* field offset */
++#define I2C_ID_ID_OFFSET 8
++/* Revision */
++#define I2C_ID_REV_MASK 0x000000FF
++/* field offset */
++#define I2C_ID_REV_OFFSET 0
++
++/* I2C Error Interrupt Request Source Status Register */
++/* TXF_OFL */
++#define I2C_ERR_IRQSS_TXF_OFL 0x00000008
++/* TXF_UFL */
++#define I2C_ERR_IRQSS_TXF_UFL 0x00000004
++/* RXF_OFL */
++#define I2C_ERR_IRQSS_RXF_OFL 0x00000002
++/* RXF_UFL */
++#define I2C_ERR_IRQSS_RXF_UFL 0x00000001
++
++/* I2C Bus Status Register */
++/* Bus Status */
++#define I2C_BUS_STAT_BS_MASK 0x00000003
++/* I2C Bus is free. */
++#define I2C_BUS_STAT_BS_FREE 0x00000000
++/*
++ * The device is working as master and has claimed the control
++ * on the I2C-bus (busy master).
++ */
++#define I2C_BUS_STAT_BS_BM 0x00000002
++
++/* I2C Interrupt Clear Register */
++/* Clear */
++#define I2C_ICR_BREQ_INT_CLR 0x00000008
++/* Clear */
++#define I2C_ICR_LBREQ_INT_CLR 0x00000004
++
++/* I2C RUN Control Register */
++/* Enable */
++#define I2C_RUN_CTRL_RUN_EN 0x00000001
++
++/* I2C Kernel Clock Control Register */
++/* field offset */
++#define I2C_CLC_RMC_OFFSET 8
++/* Enable */
++#define I2C_IMSC_I2C_P_INT_EN 0x00000020
++/* Enable */
++#define I2C_IMSC_I2C_ERR_INT_EN 0x00000010
++/* Enable */
++#define I2C_IMSC_BREQ_INT_EN 0x00000008
++/* Enable */
++#define I2C_IMSC_LBREQ_INT_EN 0x00000004
++
++/* I2C Fractional Divider Configuration Register */
++/* field offset */
++#define I2C_FDIV_CFG_INC_OFFSET 16
++/* field offset */
++#define I2C_FDIV_CFG_DEC_OFFSET 0
++
++/* I2C Fractional Divider (highspeed mode) Configuration Register */
++/* field offset */
++#define I2C_FDIV_HIGH_CFG_INC_OFFSET 16
++/* field offset */
++#define I2C_FDIV_HIGH_CFG_DEC_OFFSET 0
++
++/* I2C Address Register */
++/* Enable */
++#define I2C_ADDR_CFG_SOPE_EN 0x00200000
++/* Enable */
++#define I2C_ADDR_CFG_SONA_EN 0x00100000
++/* Enable */
++#define I2C_ADDR_CFG_MnS_EN 0x00080000
++
++/* I2C Protocol Interrupt Request Source Status Register */
++/* RX */
++#define I2C_P_IRQSS_RX 0x00000040
++/* TX_END */
++#define I2C_P_IRQSS_TX_END 0x00000020
++/* NACK */
++#define I2C_P_IRQSS_NACK 0x00000010
++/* AL */
++#define I2C_P_IRQSS_AL 0x00000008
++
++/* I2C Raw Interrupt Status Register */
++/* Read: Interrupt occurred. */
++#define I2C_RIS_I2C_P_INT_INTOCC 0x00000020
++/* Read: Interrupt occurred. */
++#define I2C_RIS_I2C_ERR_INT_INTOCC 0x00000010
++
++/* I2C End Data Control Register */
++/*
++ * Set End of Transmission - Note: Do not write '1' to this bit when bus is
++ * free. This will cause an abort after the first byte when a new transfer
++ * is started.
++ */
++#define I2C_ENDD_CTRL_SETEND 0x00000002
++/* TX FIFO Flow Control */
++#define I2C_FIFO_CFG_TXFC 0x00020000
++/* RX FIFO Flow Control */
++#define I2C_FIFO_CFG_RXFC 0x00010000
++/* Word aligned (character alignment of four characters) */
++#define I2C_FIFO_CFG_TXFA_TXFA2 0x00002000
++/* Word aligned (character alignment of four characters) */
++#define I2C_FIFO_CFG_RXFA_RXFA2 0x00000200
++/* 1 word */
++#define I2C_FIFO_CFG_TXBS_TXBS0 0x00000000
++/* 1 word */
++#define I2C_FIFO_CFG_RXBS_RXBS0 0x00000000
++
++
++/* I2C register structure */
++struct gpon_reg_i2c {
++ /* I2C Kernel Clock Control Register */
++ unsigned int clc; /* 0x00000000 */
++ /* Reserved */
++ unsigned int res_0; /* 0x00000004 */
++ /* I2C Identification Register */
++ unsigned int id; /* 0x00000008 */
++ /* Reserved */
++ unsigned int res_1; /* 0x0000000C */
++ /*
++ * I2C RUN Control Register - This register enables and disables the I2C
++ * peripheral. Before enabling, the I2C has to be configured properly.
++ * After enabling no configuration is possible
++ */
++ unsigned int run_ctrl; /* 0x00000010 */
++ /*
++ * I2C End Data Control Register - This register is used to either turn
++ * around the data transmission direction or to address another slave
++ * without sending a stop condition. Also the software can stop the
++ * slave-transmitter by sending a not-accolade when working as
++ * master-receiver or even stop data transmission immediately when
++ * operating as master-transmitter. The writing to the bits of this
++ * control register is only effective when in MASTER RECEIVES BYTES,
++ * MASTER TRANSMITS BYTES, MASTER RESTART or SLAVE RECEIVE BYTES state
++ */
++ unsigned int endd_ctrl; /* 0x00000014 */
++ /*
++ * I2C Fractional Divider Configuration Register - These register is
++ * used to program the fractional divider of the I2C bus. Before the
++ * peripheral is switched on by setting the RUN-bit the two (fixed)
++ * values for the two operating frequencies are programmed into these
++ * (configuration) registers. The Register FDIV_HIGH_CFG has the same
++ * layout as I2C_FDIV_CFG.
++ */
++ unsigned int fdiv_cfg; /* 0x00000018 */
++ /*
++ * I2C Fractional Divider (highspeed mode) Configuration Register
++ * These register is used to program the fractional divider of the I2C
++ * bus. Before the peripheral is switched on by setting the RUN-bit the
++ * two (fixed) values for the two operating frequencies are programmed
++ * into these (configuration) registers. The Register FDIV_CFG has the
++ * same layout as I2C_FDIV_CFG.
++ */
++ unsigned int fdiv_high_cfg; /* 0x0000001C */
++ /* I2C Address Configuration Register */
++ unsigned int addr_cfg; /* 0x00000020 */
++ /*
++ * I2C Bus Status Register - This register gives a status information
++ * of the I2C. This additional information can be used by the software
++ * to start proper actions.
++ */
++ unsigned int bus_stat; /* 0x00000024 */
++ /* I2C FIFO Configuration Register */
++ unsigned int fifo_cfg; /* 0x00000028 */
++ /* I2C Maximum Received Packet Size Register */
++ unsigned int mrps_ctrl; /* 0x0000002C */
++ /* I2C Received Packet Size Status Register */
++ unsigned int rps_stat; /* 0x00000030 */
++ /* I2C Transmit Packet Size Register */
++ unsigned int tps_ctrl; /* 0x00000034 */
++ /* I2C Filled FIFO Stages Status Register */
++ unsigned int ffs_stat; /* 0x00000038 */
++ /* Reserved */
++ unsigned int res_2; /* 0x0000003C */
++ /* I2C Timing Configuration Register */
++ unsigned int tim_cfg; /* 0x00000040 */
++ /* Reserved */
++ unsigned int res_3[7]; /* 0x00000044 */
++ /* I2C Error Interrupt Request Source Mask Register */
++ unsigned int err_irqsm; /* 0x00000060 */
++ /* I2C Error Interrupt Request Source Status Register */
++ unsigned int err_irqss; /* 0x00000064 */
++ /* I2C Error Interrupt Request Source Clear Register */
++ unsigned int err_irqsc; /* 0x00000068 */
++ /* Reserved */
++ unsigned int res_4; /* 0x0000006C */
++ /* I2C Protocol Interrupt Request Source Mask Register */
++ unsigned int p_irqsm; /* 0x00000070 */
++ /* I2C Protocol Interrupt Request Source Status Register */
++ unsigned int p_irqss; /* 0x00000074 */
++ /* I2C Protocol Interrupt Request Source Clear Register */
++ unsigned int p_irqsc; /* 0x00000078 */
++ /* Reserved */
++ unsigned int res_5; /* 0x0000007C */
++ /* I2C Raw Interrupt Status Register */
++ unsigned int ris; /* 0x00000080 */
++ /* I2C Interrupt Mask Control Register */
++ unsigned int imsc; /* 0x00000084 */
++ /* I2C Masked Interrupt Status Register */
++ unsigned int mis; /* 0x00000088 */
++ /* I2C Interrupt Clear Register */
++ unsigned int icr; /* 0x0000008C */
++ /* I2C Interrupt Set Register */
++ unsigned int isr; /* 0x00000090 */
++ /* I2C DMA Enable Register */
++ unsigned int dmae; /* 0x00000094 */
++ /* Reserved */
++ unsigned int res_6[8154]; /* 0x00000098 */
++ /* I2C Transmit Data Register */
++ unsigned int txd; /* 0x00008000 */
++ /* Reserved */
++ unsigned int res_7[4095]; /* 0x00008004 */
++ /* I2C Receive Data Register */
++ unsigned int rxd; /* 0x0000C000 */
++ /* Reserved */
++ unsigned int res_8[4095]; /* 0x0000C004 */
++};
++
++/* mapping for access macros */
++#define i2c ((struct gpon_reg_i2c *)priv->membase)
++#define reg_r32(reg) __raw_readl(reg)
++#define reg_w32(val, reg) __raw_writel(val, reg)
++#define reg_w32_mask(clear, set, reg) \
++ reg_w32((reg_r32(reg) & ~(clear)) | (set), reg)
++#define reg_r32_table(reg, idx) reg_r32(&((uint32_t *)®)[idx])
++#define reg_w32_table(val, reg, idx) reg_w32(val, &((uint32_t *)®)[idx])
++
++#define i2c_r32(reg) reg_r32(&i2c->reg)
++#define i2c_w32(val, reg) reg_w32(val, &i2c->reg)
++#define i2c_w32_mask(clear, set, reg) reg_w32_mask(clear, set, &i2c->reg)
++
++#define DRV_NAME "i2c-falcon"
++#define DRV_VERSION "1.01"
++
++#define FALCON_I2C_BUSY_TIMEOUT 20 /* ms */
++
++#ifdef DEBUG
++#define FALCON_I2C_XFER_TIMEOUT (25 * HZ)
++#else
++#define FALCON_I2C_XFER_TIMEOUT HZ
++#endif
++#if defined(DEBUG) && 0
++#define PRINTK(arg...) pr_info(arg)
++#else
++#define PRINTK(arg...) do {} while (0)
++#endif
++
++#define FALCON_I2C_IMSC_DEFAULT_MASK (I2C_IMSC_I2C_P_INT_EN | \
++ I2C_IMSC_I2C_ERR_INT_EN)
++
++#define FALCON_I2C_ARB_LOST (1 << 0)
++#define FALCON_I2C_NACK (1 << 1)
++#define FALCON_I2C_RX_UFL (1 << 2)
++#define FALCON_I2C_RX_OFL (1 << 3)
++#define FALCON_I2C_TX_UFL (1 << 4)
++#define FALCON_I2C_TX_OFL (1 << 5)
++
++struct falcon_i2c {
++ struct mutex mutex;
++
++ enum {
++ FALCON_I2C_MODE_100 = 1,
++ FALCON_I2C_MODE_400 = 2,
++ FALCON_I2C_MODE_3400 = 3
++ } mode; /* current speed mode */
++
++ struct clk *clk; /* clock input for i2c hardware block */
++ struct gpon_reg_i2c __iomem *membase; /* base of mapped registers */
++ int irq_lb, irq_b, irq_err, irq_p; /* last burst, burst, error,
++ protocol IRQs */
++
++ struct i2c_adapter adap;
++ struct device *dev;
++
++ struct completion cmd_complete;
++
++ /* message transfer data */
++ /* current message */
++ struct i2c_msg *current_msg;
++ /* number of messages to handle */
++ int msgs_num;
++ /* current buffer */
++ u8 *msg_buf;
++ /* remaining length of current buffer */
++ u32 msg_buf_len;
++ /* error status of the current transfer */
++ int msg_err;
++
++ /* master status codes */
++ enum {
++ STATUS_IDLE,
++ STATUS_ADDR, /* address phase */
++ STATUS_WRITE,
++ STATUS_READ,
++ STATUS_READ_END,
++ STATUS_STOP
++ } status;
++};
++
++static irqreturn_t falcon_i2c_isr(int irq, void *dev_id);
++
++static inline void enable_burst_irq(struct falcon_i2c *priv)
++{
++ i2c_w32_mask(0, I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, imsc);
++}
++static inline void disable_burst_irq(struct falcon_i2c *priv)
++{
++ i2c_w32_mask(I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, 0, imsc);
++}
++
++static void prepare_msg_send_addr(struct falcon_i2c *priv)
++{
++ struct i2c_msg *msg = priv->current_msg;
++ int rd = !!(msg->flags & I2C_M_RD);
++ u16 addr = msg->addr;
++
++ /* new i2c_msg */
++ priv->msg_buf = msg->buf;
++ priv->msg_buf_len = msg->len;
++ if (rd)
++ priv->status = STATUS_READ;
++ else
++ priv->status = STATUS_WRITE;
++
++ /* send slave address */
++ if (msg->flags & I2C_M_TEN) {
++ i2c_w32(0xf0 | ((addr & 0x300) >> 7) | rd, txd);
++ i2c_w32(addr & 0xff, txd);
++ } else
++ i2c_w32((addr & 0x7f) << 1 | rd, txd);
++}
++
++static void set_tx_len(struct falcon_i2c *priv)
++{
++ struct i2c_msg *msg = priv->current_msg;
++ int len = (msg->flags & I2C_M_TEN) ? 2 : 1;
++
++ PRINTK("set_tx_len %cX\n", (msg->flags & I2C_M_RD) ? ('R') : ('T'));
++
++ priv->status = STATUS_ADDR;
++
++ if (!(msg->flags & I2C_M_RD)) {
++ len += msg->len;
++ } else {
++ /* set maximum received packet size (before rx int!) */
++ i2c_w32(msg->len, mrps_ctrl);
++ }
++ i2c_w32(len, tps_ctrl);
++ enable_burst_irq(priv);
++}
++
++static int falcon_i2c_hw_init(struct i2c_adapter *adap)
++{
++ struct falcon_i2c *priv = i2c_get_adapdata(adap);
++
++ /* disable bus */
++ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
++
++#ifndef DEBUG
++ /* set normal operation clock divider */
++ i2c_w32(1 << I2C_CLC_RMC_OFFSET, clc);
++#else
++ /* for debugging a higher divider value! */
++ i2c_w32(0xF0 << I2C_CLC_RMC_OFFSET, clc);
++#endif
++
++ /* set frequency */
++ if (priv->mode == FALCON_I2C_MODE_100) {
++ dev_dbg(priv->dev, "set standard mode (100 kHz)\n");
++ i2c_w32(0, fdiv_high_cfg);
++ i2c_w32((1 << I2C_FDIV_CFG_INC_OFFSET) |
++ (499 << I2C_FDIV_CFG_DEC_OFFSET),
++ fdiv_cfg);
++ } else if (priv->mode == FALCON_I2C_MODE_400) {
++ dev_dbg(priv->dev, "set fast mode (400 kHz)\n");
++ i2c_w32(0, fdiv_high_cfg);
++ i2c_w32((1 << I2C_FDIV_CFG_INC_OFFSET) |
++ (124 << I2C_FDIV_CFG_DEC_OFFSET),
++ fdiv_cfg);
++ } else if (priv->mode == FALCON_I2C_MODE_3400) {
++ dev_dbg(priv->dev, "set high mode (3.4 MHz)\n");
++ i2c_w32(0, fdiv_cfg);
++ /* TODO recalculate value for 100MHz input */
++ i2c_w32((41 << I2C_FDIV_HIGH_CFG_INC_OFFSET) |
++ (152 << I2C_FDIV_HIGH_CFG_DEC_OFFSET),
++ fdiv_high_cfg);
++ } else {
++ dev_warn(priv->dev, "unknown mode\n");
++ return -ENODEV;
++ }
++
++ /* configure fifo */
++ i2c_w32(I2C_FIFO_CFG_TXFC | /* tx fifo as flow controller */
++ I2C_FIFO_CFG_RXFC | /* rx fifo as flow controller */
++ I2C_FIFO_CFG_TXFA_TXFA2 | /* tx fifo 4-byte aligned */
++ I2C_FIFO_CFG_RXFA_RXFA2 | /* rx fifo 4-byte aligned */
++ I2C_FIFO_CFG_TXBS_TXBS0 | /* tx fifo burst size is 1 word */
++ I2C_FIFO_CFG_RXBS_RXBS0, /* rx fifo burst size is 1 word */
++ fifo_cfg);
++
++ /* configure address */
++ i2c_w32(I2C_ADDR_CFG_SOPE_EN | /* generate stop when no more data
++ in the fifo */
++ I2C_ADDR_CFG_SONA_EN | /* generate stop when NA received */
++ I2C_ADDR_CFG_MnS_EN | /* we are master device */
++ 0, /* our slave address (not used!) */
++ addr_cfg);
++
++ /* enable bus */
++ i2c_w32_mask(0, I2C_RUN_CTRL_RUN_EN, run_ctrl);
++
++ return 0;
++}
++
++static int falcon_i2c_wait_bus_not_busy(struct falcon_i2c *priv)
++{
++ int timeout = FALCON_I2C_BUSY_TIMEOUT;
++
++ while ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK)
++ != I2C_BUS_STAT_BS_FREE) {
++ if (timeout <= 0) {
++ dev_warn(priv->dev, "timeout waiting for bus ready\n");
++ return -ETIMEDOUT;
++ }
++ timeout--;
++ mdelay(1);
++ }
++
++ return 0;
++}
++
++static void falcon_i2c_tx(struct falcon_i2c *priv, int last)
++{
++ if (priv->msg_buf_len && priv->msg_buf) {
++ i2c_w32(*priv->msg_buf, txd);
++
++ if (--priv->msg_buf_len)
++ priv->msg_buf++;
++ else
++ priv->msg_buf = NULL;
++ } else
++ last = 1;
++
++ if (last)
++ disable_burst_irq(priv);
++}
++
++static void falcon_i2c_rx(struct falcon_i2c *priv, int last)
++{
++ u32 fifo_stat, timeout;
++ if (priv->msg_buf_len && priv->msg_buf) {
++ timeout = 5000000;
++ do {
++ fifo_stat = i2c_r32(ffs_stat);
++ } while (!fifo_stat && --timeout);
++ if (!timeout) {
++ last = 1;
++ PRINTK("\nrx timeout\n");
++ goto err;
++ }
++ while (fifo_stat) {
++ *priv->msg_buf = i2c_r32(rxd);
++ if (--priv->msg_buf_len)
++ priv->msg_buf++;
++ else {
++ priv->msg_buf = NULL;
++ last = 1;
++ break;
++ }
++ #if 0
++ fifo_stat = i2c_r32(ffs_stat);
++ #else
++ /* do not read more than burst size, otherwise no "last
++ burst" is generated and the transaction is blocked! */
++ fifo_stat = 0;
++ #endif
++ }
++ } else {
++ last = 1;
++ }
++err:
++ if (last) {
++ disable_burst_irq(priv);
++
++ if (priv->status == STATUS_READ_END) {
++ /* do the STATUS_STOP and complete() here, as sometimes
++ the tx_end is already seen before this is finished */
++ priv->status = STATUS_STOP;
++ complete(&priv->cmd_complete);
++ } else {
++ i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
++ priv->status = STATUS_READ_END;
++ }
++ }
++}
++
++static void falcon_i2c_xfer_init(struct falcon_i2c *priv)
++{
++ /* enable interrupts */
++ i2c_w32(FALCON_I2C_IMSC_DEFAULT_MASK, imsc);
++
++ /* trigger transfer of first msg */
++ set_tx_len(priv);
++}
++
++static void dump_msgs(struct i2c_msg msgs[], int num, int rx)
++{
++#if defined(DEBUG)
++ int i, j;
++ pr_info("Messages %d %s\n", num, rx ? "out" : "in");
++ for (i = 0; i < num; i++) {
++ pr_info("%2d %cX Msg(%d) addr=0x%X: ", i,
++ (msgs[i].flags & I2C_M_RD) ? ('R') : ('T'),
++ msgs[i].len, msgs[i].addr);
++ if (!(msgs[i].flags & I2C_M_RD) || rx) {
++ for (j = 0; j < msgs[i].len; j++)
++ printk("%02X ", msgs[i].buf[j]);
++ }
++ printk("\n");
++ }
++#endif
++}
++
++static void falcon_i2c_release_bus(struct falcon_i2c *priv)
++{
++ if ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_BM)
++ i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
++}
++
++static int falcon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
++ int num)
++{
++ struct falcon_i2c *priv = i2c_get_adapdata(adap);
++ int ret;
++
++ dev_dbg(priv->dev, "xfer %u messages\n", num);
++ dump_msgs(msgs, num, 0);
++
++ mutex_lock(&priv->mutex);
++
++ INIT_COMPLETION(priv->cmd_complete);
++ priv->current_msg = msgs;
++ priv->msgs_num = num;
++ priv->msg_err = 0;
++ priv->status = STATUS_IDLE;
++
++ /* wait for the bus to become ready */
++ ret = falcon_i2c_wait_bus_not_busy(priv);
++ if (ret)
++ goto done;
++
++ while (priv->msgs_num) {
++ /* start the transfers */
++ falcon_i2c_xfer_init(priv);
++
++ /* wait for transfers to complete */
++ ret = wait_for_completion_interruptible_timeout(
++ &priv->cmd_complete, FALCON_I2C_XFER_TIMEOUT);
++ if (ret == 0) {
++ dev_err(priv->dev, "controller timed out\n");
++ falcon_i2c_hw_init(adap);
++ ret = -ETIMEDOUT;
++ goto done;
++ } else if (ret < 0)
++ goto done;
++
++ if (priv->msg_err) {
++ if (priv->msg_err & FALCON_I2C_NACK)
++ ret = -ENXIO;
++ else
++ ret = -EREMOTEIO;
++ goto done;
++ }
++ if (--priv->msgs_num)
++ priv->current_msg++;
++ }
++ /* no error? */
++ ret = num;
++
++done:
++ falcon_i2c_release_bus(priv);
++
++ mutex_unlock(&priv->mutex);
++
++ if (ret >= 0)
++ dump_msgs(msgs, num, 1);
++
++ PRINTK("XFER ret %d\n", ret);
++ return ret;
++}
++
++static irqreturn_t falcon_i2c_isr_burst(int irq, void *dev_id)
++{
++ struct falcon_i2c *priv = dev_id;
++ struct i2c_msg *msg = priv->current_msg;
++ int last = (irq == priv->irq_lb);
++
++ if (last)
++ PRINTK("LB ");
++ else
++ PRINTK("B ");
++
++ if (msg->flags & I2C_M_RD) {
++ switch (priv->status) {
++ case STATUS_ADDR:
++ PRINTK("X");
++ prepare_msg_send_addr(priv);
++ disable_burst_irq(priv);
++ break;
++ case STATUS_READ:
++ case STATUS_READ_END:
++ PRINTK("R");
++ falcon_i2c_rx(priv, last);
++ break;
++ default:
++ disable_burst_irq(priv);
++ PRINTK("Status R %d\n", priv->status);
++ break;
++ }
++ } else {
++ switch (priv->status) {
++ case STATUS_ADDR:
++ PRINTK("x");
++ prepare_msg_send_addr(priv);
++ break;
++ case STATUS_WRITE:
++ PRINTK("w");
++ falcon_i2c_tx(priv, last);
++ break;
++ default:
++ disable_burst_irq(priv);
++ PRINTK("Status W %d\n", priv->status);
++ break;
++ }
++ }
++
++ i2c_w32(I2C_ICR_BREQ_INT_CLR | I2C_ICR_LBREQ_INT_CLR, icr);
++ return IRQ_HANDLED;
++}
++
++static void falcon_i2c_isr_prot(struct falcon_i2c *priv)
++{
++ u32 i_pro = i2c_r32(p_irqss);
++
++ PRINTK("i2c-p");
++
++ /* not acknowledge */
++ if (i_pro & I2C_P_IRQSS_NACK) {
++ priv->msg_err |= FALCON_I2C_NACK;
++ PRINTK(" nack");
++ }
++
++ /* arbitration lost */
++ if (i_pro & I2C_P_IRQSS_AL) {
++ priv->msg_err |= FALCON_I2C_ARB_LOST;
++ PRINTK(" arb-lost");
++ }
++ /* tx -> rx switch */
++ if (i_pro & I2C_P_IRQSS_RX)
++ PRINTK(" rx");
++
++ /* tx end */
++ if (i_pro & I2C_P_IRQSS_TX_END)
++ PRINTK(" txend");
++ PRINTK("\n");
++
++ if (!priv->msg_err) {
++ /* tx -> rx switch */
++ if (i_pro & I2C_P_IRQSS_RX) {
++ priv->status = STATUS_READ;
++ enable_burst_irq(priv);
++ }
++ if (i_pro & I2C_P_IRQSS_TX_END) {
++ if (priv->status == STATUS_READ)
++ priv->status = STATUS_READ_END;
++ else {
++ disable_burst_irq(priv);
++ priv->status = STATUS_STOP;
++ }
++ }
++ }
++
++ i2c_w32(i_pro, p_irqsc);
++}
++
++static irqreturn_t falcon_i2c_isr(int irq, void *dev_id)
++{
++ u32 i_raw, i_err = 0;
++ struct falcon_i2c *priv = dev_id;
++
++ i_raw = i2c_r32(mis);
++ PRINTK("i_raw 0x%08X\n", i_raw);
++
++ /* error interrupt */
++ if (i_raw & I2C_RIS_I2C_ERR_INT_INTOCC) {
++ i_err = i2c_r32(err_irqss);
++ PRINTK("i_err 0x%08X bus_stat 0x%04X\n",
++ i_err, i2c_r32(bus_stat));
++
++ /* tx fifo overflow (8) */
++ if (i_err & I2C_ERR_IRQSS_TXF_OFL)
++ priv->msg_err |= FALCON_I2C_TX_OFL;
++
++ /* tx fifo underflow (4) */
++ if (i_err & I2C_ERR_IRQSS_TXF_UFL)
++ priv->msg_err |= FALCON_I2C_TX_UFL;
++
++ /* rx fifo overflow (2) */
++ if (i_err & I2C_ERR_IRQSS_RXF_OFL)
++ priv->msg_err |= FALCON_I2C_RX_OFL;
++
++ /* rx fifo underflow (1) */
++ if (i_err & I2C_ERR_IRQSS_RXF_UFL)
++ priv->msg_err |= FALCON_I2C_RX_UFL;
++
++ i2c_w32(i_err, err_irqsc);
++ }
++
++ /* protocol interrupt */
++ if (i_raw & I2C_RIS_I2C_P_INT_INTOCC)
++ falcon_i2c_isr_prot(priv);
++
++ if ((priv->msg_err) || (priv->status == STATUS_STOP))
++ complete(&priv->cmd_complete);
++
++ return IRQ_HANDLED;
++}
++
++static u32 falcon_i2c_functionality(struct i2c_adapter *adap)
++{
++ return I2C_FUNC_I2C |
++ I2C_FUNC_10BIT_ADDR |
++ I2C_FUNC_SMBUS_EMUL;
++}
++
++static struct i2c_algorithm falcon_i2c_algorithm = {
++ .master_xfer = falcon_i2c_xfer,
++ .functionality = falcon_i2c_functionality,
++};
++
++static int __devinit falcon_i2c_probe(struct platform_device *pdev)
++{
++ int ret = 0;
++ struct falcon_i2c *priv;
++ struct i2c_adapter *adap;
++ struct resource *mmres, *ioarea,
++ *irqres_lb, *irqres_b, *irqres_err, *irqres_p;
++ struct clk *clk;
++
++ dev_dbg(&pdev->dev, "probing\n");
++
++ mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ irqres_lb = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
++ "i2c_lb");
++ irqres_b = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "i2c_b");
++ irqres_err = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
++ "i2c_err");
++ irqres_p = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "i2c_p");
++
++ if (!mmres || !irqres_lb || !irqres_b || !irqres_err || !irqres_p) {
++ dev_err(&pdev->dev, "no resources\n");
++ return -ENODEV;
++ }
++
++ clk = clk_get_fpi();
++ if (IS_ERR(clk)) {
++ dev_err(&pdev->dev, "failed to get fpi clk\n");
++ return -ENOENT;
++ }
++
++ if (clk_get_rate(clk) != 100000000) {
++ dev_err(&pdev->dev, "input clock is not 100MHz\n");
++ return -ENOENT;
++ }
++ clk = clk_get(&pdev->dev, NULL);
++ if (IS_ERR(clk)) {
++ dev_err(&pdev->dev, "failed to get i2c clk\n");
++ return -ENOENT;
++ }
++
++ /* allocate private data */
++ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
++ if (!priv) {
++ dev_err(&pdev->dev, "can't allocate private data\n");
++ return -ENOMEM;
++ }
++
++ adap = &priv->adap;
++ i2c_set_adapdata(adap, priv);
++ adap->owner = THIS_MODULE;
++ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
++ strlcpy(adap->name, DRV_NAME "-adapter", sizeof(adap->name));
++ adap->algo = &falcon_i2c_algorithm;
++
++ priv->mode = FALCON_I2C_MODE_100;
++ priv->clk = clk;
++ priv->dev = &pdev->dev;
++
++ init_completion(&priv->cmd_complete);
++ mutex_init(&priv->mutex);
++
++ if (ltq_gpio_request(&pdev->dev, 107, 0, 0, DRV_NAME":sda") ||
++ ltq_gpio_request(&pdev->dev, 108, 0, 0, DRV_NAME":scl"))
++ {
++ dev_err(&pdev->dev, "I2C gpios not available\n");
++ ret = -ENXIO;
++ goto err_free_priv;
++ }
++
++ ioarea = request_mem_region(mmres->start, resource_size(mmres),
++ pdev->name);
++
++ if (ioarea == NULL) {
++ dev_err(&pdev->dev, "I2C region already claimed\n");
++ ret = -ENXIO;
++ goto err_free_gpio;
++ }
++
++ /* map memory */
++ priv->membase = ioremap_nocache(mmres->start & ~KSEG1,
++ resource_size(mmres));
++ if (priv->membase == NULL) {
++ ret = -ENOMEM;
++ goto err_release_region;
++ }
++
++ priv->irq_lb = irqres_lb->start;
++ ret = request_irq(priv->irq_lb, falcon_i2c_isr_burst, IRQF_DISABLED,
++ irqres_lb->name, priv);
++ if (ret) {
++ dev_err(&pdev->dev, "can't get last burst IRQ %d\n",
++ irqres_lb->start);
++ ret = -ENODEV;
++ goto err_unmap_mem;
++ }
++
++ priv->irq_b = irqres_b->start;
++ ret = request_irq(priv->irq_b, falcon_i2c_isr_burst, IRQF_DISABLED,
++ irqres_b->name, priv);
++ if (ret) {
++ dev_err(&pdev->dev, "can't get burst IRQ %d\n",
++ irqres_b->start);
++ ret = -ENODEV;
++ goto err_free_lb_irq;
++ }
++
++ priv->irq_err = irqres_err->start;
++ ret = request_irq(priv->irq_err, falcon_i2c_isr, IRQF_DISABLED,
++ irqres_err->name, priv);
++ if (ret) {
++ dev_err(&pdev->dev, "can't get error IRQ %d\n",
++ irqres_err->start);
++ ret = -ENODEV;
++ goto err_free_b_irq;
++ }
++
++ priv->irq_p = irqres_p->start;
++ ret = request_irq(priv->irq_p, falcon_i2c_isr, IRQF_DISABLED,
++ irqres_p->name, priv);
++ if (ret) {
++ dev_err(&pdev->dev, "can't get protocol IRQ %d\n",
++ irqres_p->start);
++ ret = -ENODEV;
++ goto err_free_err_irq;
++ }
++
++ dev_dbg(&pdev->dev, "mapped io-space to %p\n", priv->membase);
++ dev_dbg(&pdev->dev, "use IRQs %d, %d, %d, %d\n", irqres_lb->start,
++ irqres_b->start, irqres_err->start, irqres_p->start);
++
++ /* add our adapter to the i2c stack */
++ ret = i2c_add_numbered_adapter(adap);
++ if (ret) {
++ dev_err(&pdev->dev, "can't register I2C adapter\n");
++ goto err_free_p_irq;
++ }
++
++ platform_set_drvdata(pdev, priv);
++ i2c_set_adapdata(adap, priv);
++
++ /* print module version information */
++ dev_dbg(&pdev->dev, "module id=%u revision=%u\n",
++ (i2c_r32(id) & I2C_ID_ID_MASK) >> I2C_ID_ID_OFFSET,
++ (i2c_r32(id) & I2C_ID_REV_MASK) >> I2C_ID_REV_OFFSET);
++
++ /* initialize HW */
++ ret = falcon_i2c_hw_init(adap);
++ if (ret) {
++ dev_err(&pdev->dev, "can't configure adapter\n");
++ goto err_remove_adapter;
++ }
++
++ dev_info(&pdev->dev, "version %s\n", DRV_VERSION);
++
++ return 0;
++
++err_remove_adapter:
++ i2c_del_adapter(adap);
++ platform_set_drvdata(pdev, NULL);
++
++err_free_p_irq:
++ free_irq(priv->irq_p, priv);
++
++err_free_err_irq:
++ free_irq(priv->irq_err, priv);
++
++err_free_b_irq:
++ free_irq(priv->irq_b, priv);
++
++err_free_lb_irq:
++ free_irq(priv->irq_lb, priv);
++
++err_unmap_mem:
++ iounmap(priv->membase);
++
++err_release_region:
++ release_mem_region(mmres->start, resource_size(mmres));
++
++err_free_gpio:
++ gpio_free(108);
++ gpio_free(107);
++
++err_free_priv:
++ kfree(priv);
++
++ return ret;
++}
++
++static int __devexit falcon_i2c_remove(struct platform_device *pdev)
++{
++ struct falcon_i2c *priv = platform_get_drvdata(pdev);
++ struct resource *mmres;
++
++ /* disable bus */
++ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
++
++ /* remove driver */
++ platform_set_drvdata(pdev, NULL);
++ i2c_del_adapter(&priv->adap);
++
++ free_irq(priv->irq_lb, priv);
++ free_irq(priv->irq_b, priv);
++ free_irq(priv->irq_err, priv);
++ free_irq(priv->irq_p, priv);
++
++ iounmap(priv->membase);
++
++ gpio_free(108);
++ gpio_free(107);
++
++ kfree(priv);
++
++ mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ release_mem_region(mmres->start, resource_size(mmres));
++
++ dev_dbg(&pdev->dev, "removed\n");
++
++ return 0;
++}
++
++static struct platform_driver falcon_i2c_driver = {
++ .probe = falcon_i2c_probe,
++ .remove = __devexit_p(falcon_i2c_remove),
++ .driver = {
++ .name = DRV_NAME,
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init falcon_i2c_init(void)
++{
++ int ret;
++
++ ret = platform_driver_register(&falcon_i2c_driver);
++
++ if (ret)
++ pr_debug(DRV_NAME ": can't register platform driver\n");
++
++ return ret;
++}
++
++static void __exit falcon_i2c_exit(void)
++{
++ platform_driver_unregister(&falcon_i2c_driver);
++}
++
++module_init(falcon_i2c_init);
++module_exit(falcon_i2c_exit);
++
++MODULE_DESCRIPTION("Lantiq FALC(tm) ON - I2C bus adapter");
++MODULE_ALIAS("platform:" DRV_NAME);
++MODULE_LICENSE("GPL");
++MODULE_VERSION(DRV_VERSION);
+--
+1.7.9.1
+
+++ /dev/null
-From 0ebdb2202a06d096114aa7676f02d5f426a20366 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sat, 27 Aug 2011 18:12:26 +0200
-Subject: [PATCH 39/70] SPI: MIPS: lantiq: add FALC-ON spi driver
-
-The external bus unit (EBU) found on the FALC-ON SoC has spi emulation that is
-designed for serial flash access. This driver has only been tested with m25p80
-type chips. The hardware has no support for other types of spi peripherals.
-
-Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: spi-devel-general@lists.sourceforge.net
----
- arch/mips/lantiq/falcon/devices.c | 13 +
- arch/mips/lantiq/falcon/devices.h | 4 +
- arch/mips/lantiq/falcon/mach-easy98000.c | 27 ++
- drivers/spi/Kconfig | 4 +
- drivers/spi/Makefile | 1 +
- drivers/spi/spi-falcon.c | 483 ++++++++++++++++++++++++++++++
- 6 files changed, 532 insertions(+), 0 deletions(-)
- create mode 100644 drivers/spi/spi-falcon.c
-
---- a/arch/mips/lantiq/falcon/devices.c
-+++ b/arch/mips/lantiq/falcon/devices.c
-@@ -121,3 +121,16 @@ falcon_register_gpio_extra(void)
- platform_device_register_simple("falcon_gpio", 4,
- falcon_gpio4_res, ARRAY_SIZE(falcon_gpio4_res));
- }
-+
-+/* spi flash */
-+static struct platform_device ltq_spi = {
-+ .name = "falcon_spi",
-+ .num_resources = 0,
-+};
-+
-+void __init
-+falcon_register_spi_flash(struct spi_board_info *data)
-+{
-+ spi_register_board_info(data, 1);
-+ platform_device_register(<q_spi);
-+}
---- a/arch/mips/lantiq/falcon/devices.h
-+++ b/arch/mips/lantiq/falcon/devices.h
-@@ -11,10 +11,14 @@
- #ifndef _FALCON_DEVICES_H__
- #define _FALCON_DEVICES_H__
-
-+#include <linux/spi/spi.h>
-+#include <linux/spi/flash.h>
-+
- #include "../devices.h"
-
- extern void falcon_register_nand(void);
- extern void falcon_register_gpio(void);
- extern void falcon_register_gpio_extra(void);
-+extern void falcon_register_spi_flash(struct spi_board_info *data);
-
- #endif
---- a/arch/mips/lantiq/falcon/mach-easy98000.c
-+++ b/arch/mips/lantiq/falcon/mach-easy98000.c
-@@ -40,6 +40,21 @@ struct physmap_flash_data easy98000_nor_
- .parts = easy98000_nor_partitions,
- };
-
-+static struct flash_platform_data easy98000_spi_flash_platform_data = {
-+ .name = "sflash",
-+ .parts = easy98000_nor_partitions,
-+ .nr_parts = ARRAY_SIZE(easy98000_nor_partitions)
-+};
-+
-+static struct spi_board_info easy98000_spi_flash_data __initdata = {
-+ .modalias = "m25p80",
-+ .bus_num = 0,
-+ .chip_select = 0,
-+ .max_speed_hz = 10 * 1000 * 1000,
-+ .mode = SPI_MODE_3,
-+ .platform_data = &easy98000_spi_flash_platform_data
-+};
-+
- /* setup gpio based spi bus/device for access to the eeprom on the board */
- #define SPI_GPIO_MRST 102
- #define SPI_GPIO_MTSR 103
-@@ -93,6 +108,13 @@ easy98000_init(void)
- }
-
- static void __init
-+easy98000sf_init(void)
-+{
-+ easy98000_init_common();
-+ falcon_register_spi_flash(&easy98000_spi_flash_data);
-+}
-+
-+static void __init
- easy98000nand_init(void)
- {
- easy98000_init_common();
-@@ -104,6 +126,11 @@ MIPS_MACHINE(LANTIQ_MACH_EASY98000,
- "EASY98000 Eval Board",
- easy98000_init);
-
-+MIPS_MACHINE(LANTIQ_MACH_EASY98000SF,
-+ "EASY98000SF",
-+ "EASY98000 Eval Board (Serial Flash)",
-+ easy98000sf_init);
-+
- MIPS_MACHINE(LANTIQ_MACH_EASY98000NAND,
- "EASY98000NAND",
- "EASY98000 Eval Board (NAND Flash)",
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -189,6 +189,10 @@ config SPI_MPC52xx
- This drivers supports the MPC52xx SPI controller in master SPI
- mode.
-
-+config SPI_FALCON
-+ tristate "Falcon SPI controller support"
-+ depends on SOC_FALCON
-+
- config SPI_MPC52xx_PSC
- tristate "Freescale MPC52xx PSC SPI controller"
- depends on PPC_MPC52xx && EXPERIMENTAL
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -25,6 +25,7 @@ obj-$(CONFIG_SPI_DW_MMIO) += spi-dw-mmi
- obj-$(CONFIG_SPI_DW_PCI) += spi-dw-midpci.o
- spi-dw-midpci-objs := spi-dw-pci.o spi-dw-mid.o
- obj-$(CONFIG_SPI_EP93XX) += spi-ep93xx.o
-+obj-$(CONFIG_SPI_FALCON) += spi-falcon.o
- obj-$(CONFIG_SPI_FSL_LIB) += spi-fsl-lib.o
- obj-$(CONFIG_SPI_FSL_ESPI) += spi-fsl-espi.o
- obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-spi.o
---- /dev/null
-+++ b/drivers/spi/spi-falcon.c
-@@ -0,0 +1,483 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/delay.h>
-+#include <linux/workqueue.h>
-+
-+#include <lantiq_soc.h>
-+
-+#define DRV_NAME "falcon_spi"
-+
-+#define FALCON_SPI_XFER_BEGIN (1 << 0)
-+#define FALCON_SPI_XFER_END (1 << 1)
-+
-+/* Bus Read Configuration Register0 */
-+#define LTQ_BUSRCON0 0x00000010
-+/* Bus Write Configuration Register0 */
-+#define LTQ_BUSWCON0 0x00000018
-+/* Serial Flash Configuration Register */
-+#define LTQ_SFCON 0x00000080
-+/* Serial Flash Time Register */
-+#define LTQ_SFTIME 0x00000084
-+/* Serial Flash Status Register */
-+#define LTQ_SFSTAT 0x00000088
-+/* Serial Flash Command Register */
-+#define LTQ_SFCMD 0x0000008C
-+/* Serial Flash Address Register */
-+#define LTQ_SFADDR 0x00000090
-+/* Serial Flash Data Register */
-+#define LTQ_SFDATA 0x00000094
-+/* Serial Flash I/O Control Register */
-+#define LTQ_SFIO 0x00000098
-+/* EBU Clock Control Register */
-+#define LTQ_EBUCC 0x000000C4
-+
-+/* Dummy Phase Length */
-+#define SFCMD_DUMLEN_OFFSET 16
-+#define SFCMD_DUMLEN_MASK 0x000F0000
-+/* Chip Select */
-+#define SFCMD_CS_OFFSET 24
-+#define SFCMD_CS_MASK 0x07000000
-+/* field offset */
-+#define SFCMD_ALEN_OFFSET 20
-+#define SFCMD_ALEN_MASK 0x00700000
-+/* SCK Rise-edge Position */
-+#define SFTIME_SCKR_POS_OFFSET 8
-+#define SFTIME_SCKR_POS_MASK 0x00000F00
-+/* SCK Period */
-+#define SFTIME_SCK_PER_OFFSET 0
-+#define SFTIME_SCK_PER_MASK 0x0000000F
-+/* SCK Fall-edge Position */
-+#define SFTIME_SCKF_POS_OFFSET 12
-+#define SFTIME_SCKF_POS_MASK 0x0000F000
-+/* Device Size */
-+#define SFCON_DEV_SIZE_A23_0 0x03000000
-+#define SFCON_DEV_SIZE_MASK 0x0F000000
-+/* Read Data Position */
-+#define SFTIME_RD_POS_MASK 0x000F0000
-+/* Data Output */
-+#define SFIO_UNUSED_WD_MASK 0x0000000F
-+/* Command Opcode mask */
-+#define SFCMD_OPC_MASK 0x000000FF
-+/* dlen bytes of data to write */
-+#define SFCMD_DIR_WRITE 0x00000100
-+/* Data Length offset */
-+#define SFCMD_DLEN_OFFSET 9
-+/* Command Error */
-+#define SFSTAT_CMD_ERR 0x20000000
-+/* Access Command Pending */
-+#define SFSTAT_CMD_PEND 0x00400000
-+/* Frequency set to 100MHz. */
-+#define EBUCC_EBUDIV_SELF100 0x00000001
-+/* Serial Flash */
-+#define BUSRCON0_AGEN_SERIAL_FLASH 0xF0000000
-+/* 8-bit multiplexed */
-+#define BUSRCON0_PORTW_8_BIT_MUX 0x00000000
-+/* Serial Flash */
-+#define BUSWCON0_AGEN_SERIAL_FLASH 0xF0000000
-+/* Chip Select after opcode */
-+#define SFCMD_KEEP_CS_KEEP_SELECTED 0x00008000
-+
-+struct falcon_spi {
-+ u32 sfcmd; /* for caching of opcode, direction, ... */
-+ struct spi_master *master;
-+};
-+
-+int
-+falcon_spi_xfer(struct spi_device *spi,
-+ struct spi_transfer *t,
-+ unsigned long flags)
-+{
-+ struct device *dev = &spi->dev;
-+ struct falcon_spi *priv = spi_master_get_devdata(spi->master);
-+ const u8 *txp = t->tx_buf;
-+ u8 *rxp = t->rx_buf;
-+ unsigned int bytelen = ((8 * t->len + 7) / 8);
-+ unsigned int len, alen, dumlen;
-+ u32 val;
-+ enum {
-+ state_init,
-+ state_command_prepare,
-+ state_write,
-+ state_read,
-+ state_disable_cs,
-+ state_end
-+ } state = state_init;
-+
-+ do {
-+ switch (state) {
-+ case state_init: /* detect phase of upper layer sequence */
-+ {
-+ /* initial write ? */
-+ if (flags & FALCON_SPI_XFER_BEGIN) {
-+ if (!txp) {
-+ dev_err(dev,
-+ "BEGIN without tx data!\n");
-+ return -1;
-+ }
-+ /*
-+ * Prepare the parts of the sfcmd register,
-+ * which should not
-+ * change during a sequence!
-+ * Only exception are the length fields,
-+ * especially alen and dumlen.
-+ */
-+
-+ priv->sfcmd = ((spi->chip_select
-+ << SFCMD_CS_OFFSET)
-+ & SFCMD_CS_MASK);
-+ priv->sfcmd |= SFCMD_KEEP_CS_KEEP_SELECTED;
-+ priv->sfcmd |= *txp;
-+ txp++;
-+ bytelen--;
-+ if (bytelen) {
-+ /*
-+ * more data:
-+ * maybe address and/or dummy
-+ */
-+ state = state_command_prepare;
-+ break;
-+ } else {
-+ dev_dbg(dev, "write cmd %02X\n",
-+ priv->sfcmd & SFCMD_OPC_MASK);
-+ }
-+ }
-+ /* continued write ? */
-+ if (txp && bytelen) {
-+ state = state_write;
-+ break;
-+ }
-+ /* read data? */
-+ if (rxp && bytelen) {
-+ state = state_read;
-+ break;
-+ }
-+ /* end of sequence? */
-+ if (flags & FALCON_SPI_XFER_END)
-+ state = state_disable_cs;
-+ else
-+ state = state_end;
-+ break;
-+ }
-+ /* collect tx data for address and dummy phase */
-+ case state_command_prepare:
-+ {
-+ /* txp is valid, already checked */
-+ val = 0;
-+ alen = 0;
-+ dumlen = 0;
-+ while (bytelen > 0) {
-+ if (alen < 3) {
-+ val = (val<<8)|(*txp++);
-+ alen++;
-+ } else if ((dumlen < 15) && (*txp == 0)) {
-+ /*
-+ * assume dummy bytes are set to 0
-+ * from upper layer
-+ */
-+ dumlen++;
-+ txp++;
-+ } else
-+ break;
-+ bytelen--;
-+ }
-+ priv->sfcmd &= ~(SFCMD_ALEN_MASK | SFCMD_DUMLEN_MASK);
-+ priv->sfcmd |= (alen << SFCMD_ALEN_OFFSET) |
-+ (dumlen << SFCMD_DUMLEN_OFFSET);
-+ if (alen > 0)
-+ ltq_ebu_w32(val, LTQ_SFADDR);
-+
-+ dev_dbg(dev, "write cmd %02X, alen=%d "
-+ "(addr=%06X) dumlen=%d\n",
-+ priv->sfcmd & SFCMD_OPC_MASK,
-+ alen, val, dumlen);
-+
-+ if (bytelen > 0) {
-+ /* continue with write */
-+ state = state_write;
-+ } else if (flags & FALCON_SPI_XFER_END) {
-+ /* end of sequence? */
-+ state = state_disable_cs;
-+ } else {
-+ /*
-+ * go to end and expect another
-+ * call (read or write)
-+ */
-+ state = state_end;
-+ }
-+ break;
-+ }
-+ case state_write:
-+ {
-+ /* txp still valid */
-+ priv->sfcmd |= SFCMD_DIR_WRITE;
-+ len = 0;
-+ val = 0;
-+ do {
-+ if (bytelen--)
-+ val |= (*txp++) << (8 * len++);
-+ if ((flags & FALCON_SPI_XFER_END)
-+ && (bytelen == 0)) {
-+ priv->sfcmd &=
-+ ~SFCMD_KEEP_CS_KEEP_SELECTED;
-+ }
-+ if ((len == 4) || (bytelen == 0)) {
-+ ltq_ebu_w32(val, LTQ_SFDATA);
-+ ltq_ebu_w32(priv->sfcmd
-+ | (len<<SFCMD_DLEN_OFFSET),
-+ LTQ_SFCMD);
-+ len = 0;
-+ val = 0;
-+ priv->sfcmd &= ~(SFCMD_ALEN_MASK
-+ | SFCMD_DUMLEN_MASK);
-+ }
-+ } while (bytelen);
-+ state = state_end;
-+ break;
-+ }
-+ case state_read:
-+ {
-+ /* read data */
-+ priv->sfcmd &= ~SFCMD_DIR_WRITE;
-+ do {
-+ if ((flags & FALCON_SPI_XFER_END)
-+ && (bytelen <= 4)) {
-+ priv->sfcmd &=
-+ ~SFCMD_KEEP_CS_KEEP_SELECTED;
-+ }
-+ len = (bytelen > 4) ? 4 : bytelen;
-+ bytelen -= len;
-+ ltq_ebu_w32(priv->sfcmd
-+ |(len<<SFCMD_DLEN_OFFSET), LTQ_SFCMD);
-+ priv->sfcmd &= ~(SFCMD_ALEN_MASK
-+ | SFCMD_DUMLEN_MASK);
-+ do {
-+ val = ltq_ebu_r32(LTQ_SFSTAT);
-+ if (val & SFSTAT_CMD_ERR) {
-+ /* reset error status */
-+ dev_err(dev, "SFSTAT: CMD_ERR "
-+ "(%x)\n", val);
-+ ltq_ebu_w32(SFSTAT_CMD_ERR,
-+ LTQ_SFSTAT);
-+ return -1;
-+ }
-+ } while (val & SFSTAT_CMD_PEND);
-+ val = ltq_ebu_r32(LTQ_SFDATA);
-+ do {
-+ *rxp = (val & 0xFF);
-+ rxp++;
-+ val >>= 8;
-+ len--;
-+ } while (len);
-+ } while (bytelen);
-+ state = state_end;
-+ break;
-+ }
-+ case state_disable_cs:
-+ {
-+ priv->sfcmd &= ~SFCMD_KEEP_CS_KEEP_SELECTED;
-+ ltq_ebu_w32(priv->sfcmd | (0 << SFCMD_DLEN_OFFSET),
-+ LTQ_SFCMD);
-+ val = ltq_ebu_r32(LTQ_SFSTAT);
-+ if (val & SFSTAT_CMD_ERR) {
-+ /* reset error status */
-+ dev_err(dev, "SFSTAT: CMD_ERR (%x)\n", val);
-+ ltq_ebu_w32(SFSTAT_CMD_ERR, LTQ_SFSTAT);
-+ return -1;
-+ }
-+ state = state_end;
-+ break;
-+ }
-+ case state_end:
-+ break;
-+ }
-+ } while (state != state_end);
-+
-+ return 0;
-+}
-+
-+static int
-+falcon_spi_setup(struct spi_device *spi)
-+{
-+ struct device *dev = &spi->dev;
-+ const u32 ebuclk = 100000000;
-+ unsigned int i;
-+ unsigned long flags;
-+
-+ dev_dbg(dev, "setup\n");
-+
-+ if (spi->master->bus_num > 0 || spi->chip_select > 0)
-+ return -ENODEV;
-+
-+ spin_lock_irqsave(&ebu_lock, flags);
-+
-+ if (ebuclk < spi->max_speed_hz) {
-+ /* set EBU clock to 100 MHz */
-+ ltq_sys1_w32_mask(0, EBUCC_EBUDIV_SELF100, LTQ_EBUCC);
-+ i = 1; /* divider */
-+ } else {
-+ /* set EBU clock to 50 MHz */
-+ ltq_sys1_w32_mask(EBUCC_EBUDIV_SELF100, 0, LTQ_EBUCC);
-+
-+ /* search for suitable divider */
-+ for (i = 1; i < 7; i++) {
-+ if (ebuclk / i <= spi->max_speed_hz)
-+ break;
-+ }
-+ }
-+
-+ /* setup period of serial clock */
-+ ltq_ebu_w32_mask(SFTIME_SCKF_POS_MASK
-+ | SFTIME_SCKR_POS_MASK
-+ | SFTIME_SCK_PER_MASK,
-+ (i << SFTIME_SCKR_POS_OFFSET)
-+ | (i << (SFTIME_SCK_PER_OFFSET + 1)),
-+ LTQ_SFTIME);
-+
-+ /*
-+ * set some bits of unused_wd, to not trigger HOLD/WP
-+ * signals on non QUAD flashes
-+ */
-+ ltq_ebu_w32((SFIO_UNUSED_WD_MASK & (0x8 | 0x4)), LTQ_SFIO);
-+
-+ ltq_ebu_w32(BUSRCON0_AGEN_SERIAL_FLASH | BUSRCON0_PORTW_8_BIT_MUX,
-+ LTQ_BUSRCON0);
-+ ltq_ebu_w32(BUSWCON0_AGEN_SERIAL_FLASH, LTQ_BUSWCON0);
-+ /* set address wrap around to maximum for 24-bit addresses */
-+ ltq_ebu_w32_mask(SFCON_DEV_SIZE_MASK, SFCON_DEV_SIZE_A23_0, LTQ_SFCON);
-+
-+ spin_unlock_irqrestore(&ebu_lock, flags);
-+
-+ return 0;
-+}
-+
-+static int
-+falcon_spi_transfer(struct spi_device *spi, struct spi_message *m)
-+{
-+ struct falcon_spi *priv = spi_master_get_devdata(spi->master);
-+ struct spi_transfer *t;
-+ unsigned long spi_flags;
-+ unsigned long flags;
-+ int ret = 0;
-+
-+ priv->sfcmd = 0;
-+ m->actual_length = 0;
-+
-+ spi_flags = FALCON_SPI_XFER_BEGIN;
-+ list_for_each_entry(t, &m->transfers, transfer_list) {
-+ if (list_is_last(&t->transfer_list, &m->transfers))
-+ spi_flags |= FALCON_SPI_XFER_END;
-+
-+ spin_lock_irqsave(&ebu_lock, flags);
-+ ret = falcon_spi_xfer(spi, t, spi_flags);
-+ spin_unlock_irqrestore(&ebu_lock, flags);
-+
-+ if (ret)
-+ break;
-+
-+ m->actual_length += t->len;
-+
-+ if (t->delay_usecs || t->cs_change)
-+ BUG();
-+
-+ spi_flags = 0;
-+ }
-+
-+ m->status = ret;
-+ m->complete(m->context);
-+
-+ return 0;
-+}
-+
-+static void
-+falcon_spi_cleanup(struct spi_device *spi)
-+{
-+ struct device *dev = &spi->dev;
-+
-+ dev_dbg(dev, "cleanup\n");
-+}
-+
-+static int __devinit
-+falcon_spi_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct falcon_spi *priv;
-+ struct spi_master *master;
-+ int ret;
-+
-+ dev_dbg(dev, "probing\n");
-+
-+ master = spi_alloc_master(&pdev->dev, sizeof(*priv));
-+ if (!master) {
-+ dev_err(dev, "no memory for spi_master\n");
-+ return -ENOMEM;
-+ }
-+
-+ priv = spi_master_get_devdata(master);
-+ priv->master = master;
-+
-+ master->mode_bits = SPI_MODE_3;
-+ master->num_chipselect = 1;
-+ master->bus_num = 0;
-+
-+ master->setup = falcon_spi_setup;
-+ master->transfer = falcon_spi_transfer;
-+ master->cleanup = falcon_spi_cleanup;
-+
-+ platform_set_drvdata(pdev, priv);
-+
-+ ret = spi_register_master(master);
-+ if (ret)
-+ spi_master_put(master);
-+
-+ return ret;
-+}
-+
-+static int __devexit
-+falcon_spi_remove(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct falcon_spi *priv = platform_get_drvdata(pdev);
-+
-+ dev_dbg(dev, "removed\n");
-+
-+ spi_unregister_master(priv->master);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver falcon_spi_driver = {
-+ .probe = falcon_spi_probe,
-+ .remove = __devexit_p(falcon_spi_remove),
-+ .driver = {
-+ .name = DRV_NAME,
-+ .owner = THIS_MODULE
-+ }
-+};
-+
-+static int __init
-+falcon_spi_init(void)
-+{
-+ return platform_driver_register(&falcon_spi_driver);
-+}
-+
-+static void __exit
-+falcon_spi_exit(void)
-+{
-+ platform_driver_unregister(&falcon_spi_driver);
-+}
-+
-+module_init(falcon_spi_init);
-+module_exit(falcon_spi_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("Lantiq Falcon SPI controller driver");
+++ /dev/null
-From 97050437c6a3ce59ce2c5a8286b9bc1c9f1b3b60 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 4 Nov 2011 16:00:34 +0100
-Subject: [PATCH 40/70] I2C: MIPS: lantiq: add FALC-ON i2c bus master
-
-This patch adds the driver needed to make the I2C bus work on FALC-ON SoCs.
-
-Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: linux-i2c@vger.kernel.org
----
- .../include/asm/mach-lantiq/falcon/lantiq_soc.h | 5 +
- arch/mips/lantiq/falcon/clk.c | 44 -
- arch/mips/lantiq/falcon/devices.c | 16 +
- arch/mips/lantiq/falcon/devices.h | 1 +
- arch/mips/lantiq/falcon/mach-easy98000.c | 1 +
- drivers/i2c/busses/Kconfig | 10 +
- drivers/i2c/busses/Makefile | 1 +
- drivers/i2c/busses/i2c-falcon.c | 1040 ++++++++++++++++++++
- 8 files changed, 1074 insertions(+), 44 deletions(-)
- delete mode 100644 arch/mips/lantiq/falcon/clk.c
- create mode 100644 drivers/i2c/busses/i2c-falcon.c
-
---- a/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
-+++ b/arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h
-@@ -72,6 +72,10 @@
- #define LTQ_PADCTRL4_BASE_ADDR 0x1E800600
- #define LTQ_PADCTRL4_SIZE 0x0100
-
-+/* I2C */
-+#define GPON_I2C_BASE 0x1E200000
-+#define GPON_I2C_SIZE 0x00010000
-+
- /* CHIP ID */
- #define LTQ_STATUS_BASE_ADDR 0x1E802000
-
-@@ -106,6 +110,7 @@
- #define ACTS_PADCTRL2 0x00200000
- #define ACTS_PADCTRL3 0x00200000
- #define ACTS_PADCTRL4 0x00400000
-+#define ACTS_I2C_ACT 0x00004000
-
- /* global register ranges */
- extern __iomem void *ltq_ebu_membase;
---- a/arch/mips/lantiq/falcon/clk.c
-+++ /dev/null
-@@ -1,44 +0,0 @@
--/*
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- *
-- * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
-- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
-- */
--
--#include <linux/ioport.h>
--#include <linux/export.h>
--
--#include <lantiq_soc.h>
--
--#include "devices.h"
--
--/* CPU0 Clock Control Register */
--#define LTQ_SYS1_CPU0CC 0x0040
--/* clock divider bit */
--#define LTQ_CPU0CC_CPUDIV 0x0001
--
--unsigned int
--ltq_get_io_region_clock(void)
--{
-- return CLOCK_200M;
--}
--EXPORT_SYMBOL(ltq_get_io_region_clock);
--
--unsigned int
--ltq_get_cpu_hz(void)
--{
-- if (ltq_sys1_r32(LTQ_SYS1_CPU0CC) & LTQ_CPU0CC_CPUDIV)
-- return CLOCK_200M;
-- else
-- return CLOCK_400M;
--}
--EXPORT_SYMBOL(ltq_get_cpu_hz);
--
--unsigned int
--ltq_get_fpi_hz(void)
--{
-- return CLOCK_100M;
--}
--EXPORT_SYMBOL(ltq_get_fpi_hz);
---- a/arch/mips/lantiq/falcon/devices.c
-+++ b/arch/mips/lantiq/falcon/devices.c
-@@ -134,3 +134,19 @@ falcon_register_spi_flash(struct spi_boa
- spi_register_board_info(data, 1);
- platform_device_register(<q_spi);
- }
-+
-+/* i2c */
-+static struct resource falcon_i2c_resources[] = {
-+ MEM_RES("i2c", GPON_I2C_BASE, GPON_I2C_SIZE),
-+ IRQ_RES(i2c_lb, FALCON_IRQ_I2C_LBREQ),
-+ IRQ_RES(i2c_b, FALCON_IRQ_I2C_BREQ),
-+ IRQ_RES(i2c_err, FALCON_IRQ_I2C_I2C_ERR),
-+ IRQ_RES(i2c_p, FALCON_IRQ_I2C_I2C_P),
-+};
-+
-+void __init
-+falcon_register_i2c(void)
-+{
-+ platform_device_register_simple("i2c-falcon", 0,
-+ falcon_i2c_resources, ARRAY_SIZE(falcon_i2c_resources));
-+}
---- a/arch/mips/lantiq/falcon/devices.h
-+++ b/arch/mips/lantiq/falcon/devices.h
-@@ -20,5 +20,6 @@ extern void falcon_register_nand(void);
- extern void falcon_register_gpio(void);
- extern void falcon_register_gpio_extra(void);
- extern void falcon_register_spi_flash(struct spi_board_info *data);
-+extern void falcon_register_i2c(void);
-
- #endif
---- a/arch/mips/lantiq/falcon/mach-easy98000.c
-+++ b/arch/mips/lantiq/falcon/mach-easy98000.c
-@@ -98,6 +98,7 @@ easy98000_init_common(void)
- {
- spi_register_board_info(&easy98000_spi_gpio_devices, 1);
- platform_device_register(&easy98000_spi_gpio_device);
-+ falcon_register_i2c();
- }
-
- static void __init
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -369,6 +369,16 @@ config I2C_DESIGNWARE_PCI
- This driver can also be built as a module. If so, the module
- will be called i2c-designware-pci.
-
-+config I2C_FALCON
-+ tristate "Falcon I2C interface"
-+ depends on SOC_FALCON
-+ help
-+ If you say yes to this option, support will be included for the
-+ Lantiq FALC-ON I2C core.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called i2c-falcon.
-+
- config I2C_GPIO
- tristate "GPIO-based bitbanging I2C"
- depends on GENERIC_GPIO
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -37,6 +37,7 @@ obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) +=
- i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-core.o
- obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o
- i2c-designware-pci-objs := i2c-designware-pcidrv.o i2c-designware-core.o
-+obj-$(CONFIG_I2C_FALCON) += i2c-falcon.o
- obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
- obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
- obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-falcon.c
-@@ -0,0 +1,1040 @@
-+/*
-+ * Lantiq FALC(tm) ON - I2C bus adapter
-+ *
-+ * Parts based on i2c-designware.c and other i2c drivers from Linux 2.6.33
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
-+ */
-+
-+/*
-+ * CURRENT ISSUES:
-+ * - no high speed support
-+ * - supports only master mode
-+ * - ten bit mode is not tested (no slave devices)
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+#include <linux/slab.h>
-+#include <linux/i2c.h>
-+#include <linux/clk.h>
-+#include <linux/errno.h>
-+#include <linux/sched.h>
-+#include <linux/err.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/err.h>
-+#include <linux/gpio.h>
-+
-+#include <lantiq_soc.h>
-+
-+/* I2C Identification Register */
-+/* Module ID */
-+#define I2C_ID_ID_MASK 0x0000FF00
-+/* field offset */
-+#define I2C_ID_ID_OFFSET 8
-+/* Revision */
-+#define I2C_ID_REV_MASK 0x000000FF
-+/* field offset */
-+#define I2C_ID_REV_OFFSET 0
-+
-+/* I2C Error Interrupt Request Source Status Register */
-+/* TXF_OFL */
-+#define I2C_ERR_IRQSS_TXF_OFL 0x00000008
-+/* TXF_UFL */
-+#define I2C_ERR_IRQSS_TXF_UFL 0x00000004
-+/* RXF_OFL */
-+#define I2C_ERR_IRQSS_RXF_OFL 0x00000002
-+/* RXF_UFL */
-+#define I2C_ERR_IRQSS_RXF_UFL 0x00000001
-+
-+/* I2C Bus Status Register */
-+/* Bus Status */
-+#define I2C_BUS_STAT_BS_MASK 0x00000003
-+/* I2C Bus is free. */
-+#define I2C_BUS_STAT_BS_FREE 0x00000000
-+/*
-+ * The device is working as master and has claimed the control
-+ * on the I2C-bus (busy master).
-+ */
-+#define I2C_BUS_STAT_BS_BM 0x00000002
-+
-+/* I2C Interrupt Clear Register */
-+/* Clear */
-+#define I2C_ICR_BREQ_INT_CLR 0x00000008
-+/* Clear */
-+#define I2C_ICR_LBREQ_INT_CLR 0x00000004
-+
-+/* I2C RUN Control Register */
-+/* Enable */
-+#define I2C_RUN_CTRL_RUN_EN 0x00000001
-+
-+/* I2C Kernel Clock Control Register */
-+/* field offset */
-+#define I2C_CLC_RMC_OFFSET 8
-+/* Enable */
-+#define I2C_IMSC_I2C_P_INT_EN 0x00000020
-+/* Enable */
-+#define I2C_IMSC_I2C_ERR_INT_EN 0x00000010
-+/* Enable */
-+#define I2C_IMSC_BREQ_INT_EN 0x00000008
-+/* Enable */
-+#define I2C_IMSC_LBREQ_INT_EN 0x00000004
-+
-+/* I2C Fractional Divider Configuration Register */
-+/* field offset */
-+#define I2C_FDIV_CFG_INC_OFFSET 16
-+/* field offset */
-+#define I2C_FDIV_CFG_DEC_OFFSET 0
-+
-+/* I2C Fractional Divider (highspeed mode) Configuration Register */
-+/* field offset */
-+#define I2C_FDIV_HIGH_CFG_INC_OFFSET 16
-+/* field offset */
-+#define I2C_FDIV_HIGH_CFG_DEC_OFFSET 0
-+
-+/* I2C Address Register */
-+/* Enable */
-+#define I2C_ADDR_CFG_SOPE_EN 0x00200000
-+/* Enable */
-+#define I2C_ADDR_CFG_SONA_EN 0x00100000
-+/* Enable */
-+#define I2C_ADDR_CFG_MnS_EN 0x00080000
-+
-+/* I2C Protocol Interrupt Request Source Status Register */
-+/* RX */
-+#define I2C_P_IRQSS_RX 0x00000040
-+/* TX_END */
-+#define I2C_P_IRQSS_TX_END 0x00000020
-+/* NACK */
-+#define I2C_P_IRQSS_NACK 0x00000010
-+/* AL */
-+#define I2C_P_IRQSS_AL 0x00000008
-+
-+/* I2C Raw Interrupt Status Register */
-+/* Read: Interrupt occurred. */
-+#define I2C_RIS_I2C_P_INT_INTOCC 0x00000020
-+/* Read: Interrupt occurred. */
-+#define I2C_RIS_I2C_ERR_INT_INTOCC 0x00000010
-+
-+/* I2C End Data Control Register */
-+/*
-+ * Set End of Transmission - Note: Do not write '1' to this bit when bus is
-+ * free. This will cause an abort after the first byte when a new transfer
-+ * is started.
-+ */
-+#define I2C_ENDD_CTRL_SETEND 0x00000002
-+/* TX FIFO Flow Control */
-+#define I2C_FIFO_CFG_TXFC 0x00020000
-+/* RX FIFO Flow Control */
-+#define I2C_FIFO_CFG_RXFC 0x00010000
-+/* Word aligned (character alignment of four characters) */
-+#define I2C_FIFO_CFG_TXFA_TXFA2 0x00002000
-+/* Word aligned (character alignment of four characters) */
-+#define I2C_FIFO_CFG_RXFA_RXFA2 0x00000200
-+/* 1 word */
-+#define I2C_FIFO_CFG_TXBS_TXBS0 0x00000000
-+/* 1 word */
-+#define I2C_FIFO_CFG_RXBS_RXBS0 0x00000000
-+
-+
-+/* I2C register structure */
-+struct gpon_reg_i2c {
-+ /* I2C Kernel Clock Control Register */
-+ unsigned int clc; /* 0x00000000 */
-+ /* Reserved */
-+ unsigned int res_0; /* 0x00000004 */
-+ /* I2C Identification Register */
-+ unsigned int id; /* 0x00000008 */
-+ /* Reserved */
-+ unsigned int res_1; /* 0x0000000C */
-+ /*
-+ * I2C RUN Control Register - This register enables and disables the I2C
-+ * peripheral. Before enabling, the I2C has to be configured properly.
-+ * After enabling no configuration is possible
-+ */
-+ unsigned int run_ctrl; /* 0x00000010 */
-+ /*
-+ * I2C End Data Control Register - This register is used to either turn
-+ * around the data transmission direction or to address another slave
-+ * without sending a stop condition. Also the software can stop the
-+ * slave-transmitter by sending a not-accolade when working as
-+ * master-receiver or even stop data transmission immediately when
-+ * operating as master-transmitter. The writing to the bits of this
-+ * control register is only effective when in MASTER RECEIVES BYTES,
-+ * MASTER TRANSMITS BYTES, MASTER RESTART or SLAVE RECEIVE BYTES state
-+ */
-+ unsigned int endd_ctrl; /* 0x00000014 */
-+ /*
-+ * I2C Fractional Divider Configuration Register - These register is
-+ * used to program the fractional divider of the I2C bus. Before the
-+ * peripheral is switched on by setting the RUN-bit the two (fixed)
-+ * values for the two operating frequencies are programmed into these
-+ * (configuration) registers. The Register FDIV_HIGH_CFG has the same
-+ * layout as I2C_FDIV_CFG.
-+ */
-+ unsigned int fdiv_cfg; /* 0x00000018 */
-+ /*
-+ * I2C Fractional Divider (highspeed mode) Configuration Register
-+ * These register is used to program the fractional divider of the I2C
-+ * bus. Before the peripheral is switched on by setting the RUN-bit the
-+ * two (fixed) values for the two operating frequencies are programmed
-+ * into these (configuration) registers. The Register FDIV_CFG has the
-+ * same layout as I2C_FDIV_CFG.
-+ */
-+ unsigned int fdiv_high_cfg; /* 0x0000001C */
-+ /* I2C Address Configuration Register */
-+ unsigned int addr_cfg; /* 0x00000020 */
-+ /*
-+ * I2C Bus Status Register - This register gives a status information
-+ * of the I2C. This additional information can be used by the software
-+ * to start proper actions.
-+ */
-+ unsigned int bus_stat; /* 0x00000024 */
-+ /* I2C FIFO Configuration Register */
-+ unsigned int fifo_cfg; /* 0x00000028 */
-+ /* I2C Maximum Received Packet Size Register */
-+ unsigned int mrps_ctrl; /* 0x0000002C */
-+ /* I2C Received Packet Size Status Register */
-+ unsigned int rps_stat; /* 0x00000030 */
-+ /* I2C Transmit Packet Size Register */
-+ unsigned int tps_ctrl; /* 0x00000034 */
-+ /* I2C Filled FIFO Stages Status Register */
-+ unsigned int ffs_stat; /* 0x00000038 */
-+ /* Reserved */
-+ unsigned int res_2; /* 0x0000003C */
-+ /* I2C Timing Configuration Register */
-+ unsigned int tim_cfg; /* 0x00000040 */
-+ /* Reserved */
-+ unsigned int res_3[7]; /* 0x00000044 */
-+ /* I2C Error Interrupt Request Source Mask Register */
-+ unsigned int err_irqsm; /* 0x00000060 */
-+ /* I2C Error Interrupt Request Source Status Register */
-+ unsigned int err_irqss; /* 0x00000064 */
-+ /* I2C Error Interrupt Request Source Clear Register */
-+ unsigned int err_irqsc; /* 0x00000068 */
-+ /* Reserved */
-+ unsigned int res_4; /* 0x0000006C */
-+ /* I2C Protocol Interrupt Request Source Mask Register */
-+ unsigned int p_irqsm; /* 0x00000070 */
-+ /* I2C Protocol Interrupt Request Source Status Register */
-+ unsigned int p_irqss; /* 0x00000074 */
-+ /* I2C Protocol Interrupt Request Source Clear Register */
-+ unsigned int p_irqsc; /* 0x00000078 */
-+ /* Reserved */
-+ unsigned int res_5; /* 0x0000007C */
-+ /* I2C Raw Interrupt Status Register */
-+ unsigned int ris; /* 0x00000080 */
-+ /* I2C Interrupt Mask Control Register */
-+ unsigned int imsc; /* 0x00000084 */
-+ /* I2C Masked Interrupt Status Register */
-+ unsigned int mis; /* 0x00000088 */
-+ /* I2C Interrupt Clear Register */
-+ unsigned int icr; /* 0x0000008C */
-+ /* I2C Interrupt Set Register */
-+ unsigned int isr; /* 0x00000090 */
-+ /* I2C DMA Enable Register */
-+ unsigned int dmae; /* 0x00000094 */
-+ /* Reserved */
-+ unsigned int res_6[8154]; /* 0x00000098 */
-+ /* I2C Transmit Data Register */
-+ unsigned int txd; /* 0x00008000 */
-+ /* Reserved */
-+ unsigned int res_7[4095]; /* 0x00008004 */
-+ /* I2C Receive Data Register */
-+ unsigned int rxd; /* 0x0000C000 */
-+ /* Reserved */
-+ unsigned int res_8[4095]; /* 0x0000C004 */
-+};
-+
-+/* mapping for access macros */
-+#define i2c ((struct gpon_reg_i2c *)priv->membase)
-+#define reg_r32(reg) __raw_readl(reg)
-+#define reg_w32(val, reg) __raw_writel(val, reg)
-+#define reg_w32_mask(clear, set, reg) \
-+ reg_w32((reg_r32(reg) & ~(clear)) | (set), reg)
-+#define reg_r32_table(reg, idx) reg_r32(&((uint32_t *)®)[idx])
-+#define reg_w32_table(val, reg, idx) reg_w32(val, &((uint32_t *)®)[idx])
-+
-+#define i2c_r32(reg) reg_r32(&i2c->reg)
-+#define i2c_w32(val, reg) reg_w32(val, &i2c->reg)
-+#define i2c_w32_mask(clear, set, reg) reg_w32_mask(clear, set, &i2c->reg)
-+
-+#define DRV_NAME "i2c-falcon"
-+#define DRV_VERSION "1.01"
-+
-+#define FALCON_I2C_BUSY_TIMEOUT 20 /* ms */
-+
-+#ifdef DEBUG
-+#define FALCON_I2C_XFER_TIMEOUT (25 * HZ)
-+#else
-+#define FALCON_I2C_XFER_TIMEOUT HZ
-+#endif
-+#if defined(DEBUG) && 0
-+#define PRINTK(arg...) pr_info(arg)
-+#else
-+#define PRINTK(arg...) do {} while (0)
-+#endif
-+
-+#define FALCON_I2C_IMSC_DEFAULT_MASK (I2C_IMSC_I2C_P_INT_EN | \
-+ I2C_IMSC_I2C_ERR_INT_EN)
-+
-+#define FALCON_I2C_ARB_LOST (1 << 0)
-+#define FALCON_I2C_NACK (1 << 1)
-+#define FALCON_I2C_RX_UFL (1 << 2)
-+#define FALCON_I2C_RX_OFL (1 << 3)
-+#define FALCON_I2C_TX_UFL (1 << 4)
-+#define FALCON_I2C_TX_OFL (1 << 5)
-+
-+struct falcon_i2c {
-+ struct mutex mutex;
-+
-+ enum {
-+ FALCON_I2C_MODE_100 = 1,
-+ FALCON_I2C_MODE_400 = 2,
-+ FALCON_I2C_MODE_3400 = 3
-+ } mode; /* current speed mode */
-+
-+ struct clk *clk; /* clock input for i2c hardware block */
-+ struct gpon_reg_i2c __iomem *membase; /* base of mapped registers */
-+ int irq_lb, irq_b, irq_err, irq_p; /* last burst, burst, error,
-+ protocol IRQs */
-+
-+ struct i2c_adapter adap;
-+ struct device *dev;
-+
-+ struct completion cmd_complete;
-+
-+ /* message transfer data */
-+ /* current message */
-+ struct i2c_msg *current_msg;
-+ /* number of messages to handle */
-+ int msgs_num;
-+ /* current buffer */
-+ u8 *msg_buf;
-+ /* remaining length of current buffer */
-+ u32 msg_buf_len;
-+ /* error status of the current transfer */
-+ int msg_err;
-+
-+ /* master status codes */
-+ enum {
-+ STATUS_IDLE,
-+ STATUS_ADDR, /* address phase */
-+ STATUS_WRITE,
-+ STATUS_READ,
-+ STATUS_READ_END,
-+ STATUS_STOP
-+ } status;
-+};
-+
-+static irqreturn_t falcon_i2c_isr(int irq, void *dev_id);
-+
-+static inline void enable_burst_irq(struct falcon_i2c *priv)
-+{
-+ i2c_w32_mask(0, I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, imsc);
-+}
-+static inline void disable_burst_irq(struct falcon_i2c *priv)
-+{
-+ i2c_w32_mask(I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, 0, imsc);
-+}
-+
-+static void prepare_msg_send_addr(struct falcon_i2c *priv)
-+{
-+ struct i2c_msg *msg = priv->current_msg;
-+ int rd = !!(msg->flags & I2C_M_RD);
-+ u16 addr = msg->addr;
-+
-+ /* new i2c_msg */
-+ priv->msg_buf = msg->buf;
-+ priv->msg_buf_len = msg->len;
-+ if (rd)
-+ priv->status = STATUS_READ;
-+ else
-+ priv->status = STATUS_WRITE;
-+
-+ /* send slave address */
-+ if (msg->flags & I2C_M_TEN) {
-+ i2c_w32(0xf0 | ((addr & 0x300) >> 7) | rd, txd);
-+ i2c_w32(addr & 0xff, txd);
-+ } else
-+ i2c_w32((addr & 0x7f) << 1 | rd, txd);
-+}
-+
-+static void set_tx_len(struct falcon_i2c *priv)
-+{
-+ struct i2c_msg *msg = priv->current_msg;
-+ int len = (msg->flags & I2C_M_TEN) ? 2 : 1;
-+
-+ PRINTK("set_tx_len %cX\n", (msg->flags & I2C_M_RD) ? ('R') : ('T'));
-+
-+ priv->status = STATUS_ADDR;
-+
-+ if (!(msg->flags & I2C_M_RD)) {
-+ len += msg->len;
-+ } else {
-+ /* set maximum received packet size (before rx int!) */
-+ i2c_w32(msg->len, mrps_ctrl);
-+ }
-+ i2c_w32(len, tps_ctrl);
-+ enable_burst_irq(priv);
-+}
-+
-+static int falcon_i2c_hw_init(struct i2c_adapter *adap)
-+{
-+ struct falcon_i2c *priv = i2c_get_adapdata(adap);
-+
-+ /* disable bus */
-+ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
-+
-+#ifndef DEBUG
-+ /* set normal operation clock divider */
-+ i2c_w32(1 << I2C_CLC_RMC_OFFSET, clc);
-+#else
-+ /* for debugging a higher divider value! */
-+ i2c_w32(0xF0 << I2C_CLC_RMC_OFFSET, clc);
-+#endif
-+
-+ /* set frequency */
-+ if (priv->mode == FALCON_I2C_MODE_100) {
-+ dev_dbg(priv->dev, "set standard mode (100 kHz)\n");
-+ i2c_w32(0, fdiv_high_cfg);
-+ i2c_w32((1 << I2C_FDIV_CFG_INC_OFFSET) |
-+ (499 << I2C_FDIV_CFG_DEC_OFFSET),
-+ fdiv_cfg);
-+ } else if (priv->mode == FALCON_I2C_MODE_400) {
-+ dev_dbg(priv->dev, "set fast mode (400 kHz)\n");
-+ i2c_w32(0, fdiv_high_cfg);
-+ i2c_w32((1 << I2C_FDIV_CFG_INC_OFFSET) |
-+ (124 << I2C_FDIV_CFG_DEC_OFFSET),
-+ fdiv_cfg);
-+ } else if (priv->mode == FALCON_I2C_MODE_3400) {
-+ dev_dbg(priv->dev, "set high mode (3.4 MHz)\n");
-+ i2c_w32(0, fdiv_cfg);
-+ /* TODO recalculate value for 100MHz input */
-+ i2c_w32((41 << I2C_FDIV_HIGH_CFG_INC_OFFSET) |
-+ (152 << I2C_FDIV_HIGH_CFG_DEC_OFFSET),
-+ fdiv_high_cfg);
-+ } else {
-+ dev_warn(priv->dev, "unknown mode\n");
-+ return -ENODEV;
-+ }
-+
-+ /* configure fifo */
-+ i2c_w32(I2C_FIFO_CFG_TXFC | /* tx fifo as flow controller */
-+ I2C_FIFO_CFG_RXFC | /* rx fifo as flow controller */
-+ I2C_FIFO_CFG_TXFA_TXFA2 | /* tx fifo 4-byte aligned */
-+ I2C_FIFO_CFG_RXFA_RXFA2 | /* rx fifo 4-byte aligned */
-+ I2C_FIFO_CFG_TXBS_TXBS0 | /* tx fifo burst size is 1 word */
-+ I2C_FIFO_CFG_RXBS_RXBS0, /* rx fifo burst size is 1 word */
-+ fifo_cfg);
-+
-+ /* configure address */
-+ i2c_w32(I2C_ADDR_CFG_SOPE_EN | /* generate stop when no more data
-+ in the fifo */
-+ I2C_ADDR_CFG_SONA_EN | /* generate stop when NA received */
-+ I2C_ADDR_CFG_MnS_EN | /* we are master device */
-+ 0, /* our slave address (not used!) */
-+ addr_cfg);
-+
-+ /* enable bus */
-+ i2c_w32_mask(0, I2C_RUN_CTRL_RUN_EN, run_ctrl);
-+
-+ return 0;
-+}
-+
-+static int falcon_i2c_wait_bus_not_busy(struct falcon_i2c *priv)
-+{
-+ int timeout = FALCON_I2C_BUSY_TIMEOUT;
-+
-+ while ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK)
-+ != I2C_BUS_STAT_BS_FREE) {
-+ if (timeout <= 0) {
-+ dev_warn(priv->dev, "timeout waiting for bus ready\n");
-+ return -ETIMEDOUT;
-+ }
-+ timeout--;
-+ mdelay(1);
-+ }
-+
-+ return 0;
-+}
-+
-+static void falcon_i2c_tx(struct falcon_i2c *priv, int last)
-+{
-+ if (priv->msg_buf_len && priv->msg_buf) {
-+ i2c_w32(*priv->msg_buf, txd);
-+
-+ if (--priv->msg_buf_len)
-+ priv->msg_buf++;
-+ else
-+ priv->msg_buf = NULL;
-+ } else
-+ last = 1;
-+
-+ if (last)
-+ disable_burst_irq(priv);
-+}
-+
-+static void falcon_i2c_rx(struct falcon_i2c *priv, int last)
-+{
-+ u32 fifo_stat, timeout;
-+ if (priv->msg_buf_len && priv->msg_buf) {
-+ timeout = 5000000;
-+ do {
-+ fifo_stat = i2c_r32(ffs_stat);
-+ } while (!fifo_stat && --timeout);
-+ if (!timeout) {
-+ last = 1;
-+ PRINTK("\nrx timeout\n");
-+ goto err;
-+ }
-+ while (fifo_stat) {
-+ *priv->msg_buf = i2c_r32(rxd);
-+ if (--priv->msg_buf_len)
-+ priv->msg_buf++;
-+ else {
-+ priv->msg_buf = NULL;
-+ last = 1;
-+ break;
-+ }
-+ #if 0
-+ fifo_stat = i2c_r32(ffs_stat);
-+ #else
-+ /* do not read more than burst size, otherwise no "last
-+ burst" is generated and the transaction is blocked! */
-+ fifo_stat = 0;
-+ #endif
-+ }
-+ } else {
-+ last = 1;
-+ }
-+err:
-+ if (last) {
-+ disable_burst_irq(priv);
-+
-+ if (priv->status == STATUS_READ_END) {
-+ /* do the STATUS_STOP and complete() here, as sometimes
-+ the tx_end is already seen before this is finished */
-+ priv->status = STATUS_STOP;
-+ complete(&priv->cmd_complete);
-+ } else {
-+ i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
-+ priv->status = STATUS_READ_END;
-+ }
-+ }
-+}
-+
-+static void falcon_i2c_xfer_init(struct falcon_i2c *priv)
-+{
-+ /* enable interrupts */
-+ i2c_w32(FALCON_I2C_IMSC_DEFAULT_MASK, imsc);
-+
-+ /* trigger transfer of first msg */
-+ set_tx_len(priv);
-+}
-+
-+static void dump_msgs(struct i2c_msg msgs[], int num, int rx)
-+{
-+#if defined(DEBUG)
-+ int i, j;
-+ pr_info("Messages %d %s\n", num, rx ? "out" : "in");
-+ for (i = 0; i < num; i++) {
-+ pr_info("%2d %cX Msg(%d) addr=0x%X: ", i,
-+ (msgs[i].flags & I2C_M_RD) ? ('R') : ('T'),
-+ msgs[i].len, msgs[i].addr);
-+ if (!(msgs[i].flags & I2C_M_RD) || rx) {
-+ for (j = 0; j < msgs[i].len; j++)
-+ printk("%02X ", msgs[i].buf[j]);
-+ }
-+ printk("\n");
-+ }
-+#endif
-+}
-+
-+static void falcon_i2c_release_bus(struct falcon_i2c *priv)
-+{
-+ if ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_BM)
-+ i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl);
-+}
-+
-+static int falcon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
-+ int num)
-+{
-+ struct falcon_i2c *priv = i2c_get_adapdata(adap);
-+ int ret;
-+
-+ dev_dbg(priv->dev, "xfer %u messages\n", num);
-+ dump_msgs(msgs, num, 0);
-+
-+ mutex_lock(&priv->mutex);
-+
-+ INIT_COMPLETION(priv->cmd_complete);
-+ priv->current_msg = msgs;
-+ priv->msgs_num = num;
-+ priv->msg_err = 0;
-+ priv->status = STATUS_IDLE;
-+
-+ /* wait for the bus to become ready */
-+ ret = falcon_i2c_wait_bus_not_busy(priv);
-+ if (ret)
-+ goto done;
-+
-+ while (priv->msgs_num) {
-+ /* start the transfers */
-+ falcon_i2c_xfer_init(priv);
-+
-+ /* wait for transfers to complete */
-+ ret = wait_for_completion_interruptible_timeout(
-+ &priv->cmd_complete, FALCON_I2C_XFER_TIMEOUT);
-+ if (ret == 0) {
-+ dev_err(priv->dev, "controller timed out\n");
-+ falcon_i2c_hw_init(adap);
-+ ret = -ETIMEDOUT;
-+ goto done;
-+ } else if (ret < 0)
-+ goto done;
-+
-+ if (priv->msg_err) {
-+ if (priv->msg_err & FALCON_I2C_NACK)
-+ ret = -ENXIO;
-+ else
-+ ret = -EREMOTEIO;
-+ goto done;
-+ }
-+ if (--priv->msgs_num)
-+ priv->current_msg++;
-+ }
-+ /* no error? */
-+ ret = num;
-+
-+done:
-+ falcon_i2c_release_bus(priv);
-+
-+ mutex_unlock(&priv->mutex);
-+
-+ if (ret >= 0)
-+ dump_msgs(msgs, num, 1);
-+
-+ PRINTK("XFER ret %d\n", ret);
-+ return ret;
-+}
-+
-+static irqreturn_t falcon_i2c_isr_burst(int irq, void *dev_id)
-+{
-+ struct falcon_i2c *priv = dev_id;
-+ struct i2c_msg *msg = priv->current_msg;
-+ int last = (irq == priv->irq_lb);
-+
-+ if (last)
-+ PRINTK("LB ");
-+ else
-+ PRINTK("B ");
-+
-+ if (msg->flags & I2C_M_RD) {
-+ switch (priv->status) {
-+ case STATUS_ADDR:
-+ PRINTK("X");
-+ prepare_msg_send_addr(priv);
-+ disable_burst_irq(priv);
-+ break;
-+ case STATUS_READ:
-+ case STATUS_READ_END:
-+ PRINTK("R");
-+ falcon_i2c_rx(priv, last);
-+ break;
-+ default:
-+ disable_burst_irq(priv);
-+ PRINTK("Status R %d\n", priv->status);
-+ break;
-+ }
-+ } else {
-+ switch (priv->status) {
-+ case STATUS_ADDR:
-+ PRINTK("x");
-+ prepare_msg_send_addr(priv);
-+ break;
-+ case STATUS_WRITE:
-+ PRINTK("w");
-+ falcon_i2c_tx(priv, last);
-+ break;
-+ default:
-+ disable_burst_irq(priv);
-+ PRINTK("Status W %d\n", priv->status);
-+ break;
-+ }
-+ }
-+
-+ i2c_w32(I2C_ICR_BREQ_INT_CLR | I2C_ICR_LBREQ_INT_CLR, icr);
-+ return IRQ_HANDLED;
-+}
-+
-+static void falcon_i2c_isr_prot(struct falcon_i2c *priv)
-+{
-+ u32 i_pro = i2c_r32(p_irqss);
-+
-+ PRINTK("i2c-p");
-+
-+ /* not acknowledge */
-+ if (i_pro & I2C_P_IRQSS_NACK) {
-+ priv->msg_err |= FALCON_I2C_NACK;
-+ PRINTK(" nack");
-+ }
-+
-+ /* arbitration lost */
-+ if (i_pro & I2C_P_IRQSS_AL) {
-+ priv->msg_err |= FALCON_I2C_ARB_LOST;
-+ PRINTK(" arb-lost");
-+ }
-+ /* tx -> rx switch */
-+ if (i_pro & I2C_P_IRQSS_RX)
-+ PRINTK(" rx");
-+
-+ /* tx end */
-+ if (i_pro & I2C_P_IRQSS_TX_END)
-+ PRINTK(" txend");
-+ PRINTK("\n");
-+
-+ if (!priv->msg_err) {
-+ /* tx -> rx switch */
-+ if (i_pro & I2C_P_IRQSS_RX) {
-+ priv->status = STATUS_READ;
-+ enable_burst_irq(priv);
-+ }
-+ if (i_pro & I2C_P_IRQSS_TX_END) {
-+ if (priv->status == STATUS_READ)
-+ priv->status = STATUS_READ_END;
-+ else {
-+ disable_burst_irq(priv);
-+ priv->status = STATUS_STOP;
-+ }
-+ }
-+ }
-+
-+ i2c_w32(i_pro, p_irqsc);
-+}
-+
-+static irqreturn_t falcon_i2c_isr(int irq, void *dev_id)
-+{
-+ u32 i_raw, i_err = 0;
-+ struct falcon_i2c *priv = dev_id;
-+
-+ i_raw = i2c_r32(mis);
-+ PRINTK("i_raw 0x%08X\n", i_raw);
-+
-+ /* error interrupt */
-+ if (i_raw & I2C_RIS_I2C_ERR_INT_INTOCC) {
-+ i_err = i2c_r32(err_irqss);
-+ PRINTK("i_err 0x%08X bus_stat 0x%04X\n",
-+ i_err, i2c_r32(bus_stat));
-+
-+ /* tx fifo overflow (8) */
-+ if (i_err & I2C_ERR_IRQSS_TXF_OFL)
-+ priv->msg_err |= FALCON_I2C_TX_OFL;
-+
-+ /* tx fifo underflow (4) */
-+ if (i_err & I2C_ERR_IRQSS_TXF_UFL)
-+ priv->msg_err |= FALCON_I2C_TX_UFL;
-+
-+ /* rx fifo overflow (2) */
-+ if (i_err & I2C_ERR_IRQSS_RXF_OFL)
-+ priv->msg_err |= FALCON_I2C_RX_OFL;
-+
-+ /* rx fifo underflow (1) */
-+ if (i_err & I2C_ERR_IRQSS_RXF_UFL)
-+ priv->msg_err |= FALCON_I2C_RX_UFL;
-+
-+ i2c_w32(i_err, err_irqsc);
-+ }
-+
-+ /* protocol interrupt */
-+ if (i_raw & I2C_RIS_I2C_P_INT_INTOCC)
-+ falcon_i2c_isr_prot(priv);
-+
-+ if ((priv->msg_err) || (priv->status == STATUS_STOP))
-+ complete(&priv->cmd_complete);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static u32 falcon_i2c_functionality(struct i2c_adapter *adap)
-+{
-+ return I2C_FUNC_I2C |
-+ I2C_FUNC_10BIT_ADDR |
-+ I2C_FUNC_SMBUS_EMUL;
-+}
-+
-+static struct i2c_algorithm falcon_i2c_algorithm = {
-+ .master_xfer = falcon_i2c_xfer,
-+ .functionality = falcon_i2c_functionality,
-+};
-+
-+static int __devinit falcon_i2c_probe(struct platform_device *pdev)
-+{
-+ int ret = 0;
-+ struct falcon_i2c *priv;
-+ struct i2c_adapter *adap;
-+ struct resource *mmres, *ioarea,
-+ *irqres_lb, *irqres_b, *irqres_err, *irqres_p;
-+ struct clk *clk;
-+
-+ dev_dbg(&pdev->dev, "probing\n");
-+
-+ mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ irqres_lb = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
-+ "i2c_lb");
-+ irqres_b = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "i2c_b");
-+ irqres_err = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
-+ "i2c_err");
-+ irqres_p = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "i2c_p");
-+
-+ if (!mmres || !irqres_lb || !irqres_b || !irqres_err || !irqres_p) {
-+ dev_err(&pdev->dev, "no resources\n");
-+ return -ENODEV;
-+ }
-+
-+ clk = clk_get_fpi();
-+ if (IS_ERR(clk)) {
-+ dev_err(&pdev->dev, "failed to get fpi clk\n");
-+ return -ENOENT;
-+ }
-+
-+ if (clk_get_rate(clk) != 100000000) {
-+ dev_err(&pdev->dev, "input clock is not 100MHz\n");
-+ return -ENOENT;
-+ }
-+ clk = clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(clk)) {
-+ dev_err(&pdev->dev, "failed to get i2c clk\n");
-+ return -ENOENT;
-+ }
-+
-+ /* allocate private data */
-+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-+ if (!priv) {
-+ dev_err(&pdev->dev, "can't allocate private data\n");
-+ return -ENOMEM;
-+ }
-+
-+ adap = &priv->adap;
-+ i2c_set_adapdata(adap, priv);
-+ adap->owner = THIS_MODULE;
-+ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
-+ strlcpy(adap->name, DRV_NAME "-adapter", sizeof(adap->name));
-+ adap->algo = &falcon_i2c_algorithm;
-+
-+ priv->mode = FALCON_I2C_MODE_100;
-+ priv->clk = clk;
-+ priv->dev = &pdev->dev;
-+
-+ init_completion(&priv->cmd_complete);
-+ mutex_init(&priv->mutex);
-+
-+ if (ltq_gpio_request(&pdev->dev, 107, 0, 0, DRV_NAME":sda") ||
-+ ltq_gpio_request(&pdev->dev, 108, 0, 0, DRV_NAME":scl"))
-+ {
-+ dev_err(&pdev->dev, "I2C gpios not available\n");
-+ ret = -ENXIO;
-+ goto err_free_priv;
-+ }
-+
-+ ioarea = request_mem_region(mmres->start, resource_size(mmres),
-+ pdev->name);
-+
-+ if (ioarea == NULL) {
-+ dev_err(&pdev->dev, "I2C region already claimed\n");
-+ ret = -ENXIO;
-+ goto err_free_gpio;
-+ }
-+
-+ /* map memory */
-+ priv->membase = ioremap_nocache(mmres->start & ~KSEG1,
-+ resource_size(mmres));
-+ if (priv->membase == NULL) {
-+ ret = -ENOMEM;
-+ goto err_release_region;
-+ }
-+
-+ priv->irq_lb = irqres_lb->start;
-+ ret = request_irq(priv->irq_lb, falcon_i2c_isr_burst, IRQF_DISABLED,
-+ irqres_lb->name, priv);
-+ if (ret) {
-+ dev_err(&pdev->dev, "can't get last burst IRQ %d\n",
-+ irqres_lb->start);
-+ ret = -ENODEV;
-+ goto err_unmap_mem;
-+ }
-+
-+ priv->irq_b = irqres_b->start;
-+ ret = request_irq(priv->irq_b, falcon_i2c_isr_burst, IRQF_DISABLED,
-+ irqres_b->name, priv);
-+ if (ret) {
-+ dev_err(&pdev->dev, "can't get burst IRQ %d\n",
-+ irqres_b->start);
-+ ret = -ENODEV;
-+ goto err_free_lb_irq;
-+ }
-+
-+ priv->irq_err = irqres_err->start;
-+ ret = request_irq(priv->irq_err, falcon_i2c_isr, IRQF_DISABLED,
-+ irqres_err->name, priv);
-+ if (ret) {
-+ dev_err(&pdev->dev, "can't get error IRQ %d\n",
-+ irqres_err->start);
-+ ret = -ENODEV;
-+ goto err_free_b_irq;
-+ }
-+
-+ priv->irq_p = irqres_p->start;
-+ ret = request_irq(priv->irq_p, falcon_i2c_isr, IRQF_DISABLED,
-+ irqres_p->name, priv);
-+ if (ret) {
-+ dev_err(&pdev->dev, "can't get protocol IRQ %d\n",
-+ irqres_p->start);
-+ ret = -ENODEV;
-+ goto err_free_err_irq;
-+ }
-+
-+ dev_dbg(&pdev->dev, "mapped io-space to %p\n", priv->membase);
-+ dev_dbg(&pdev->dev, "use IRQs %d, %d, %d, %d\n", irqres_lb->start,
-+ irqres_b->start, irqres_err->start, irqres_p->start);
-+
-+ /* add our adapter to the i2c stack */
-+ ret = i2c_add_numbered_adapter(adap);
-+ if (ret) {
-+ dev_err(&pdev->dev, "can't register I2C adapter\n");
-+ goto err_free_p_irq;
-+ }
-+
-+ platform_set_drvdata(pdev, priv);
-+ i2c_set_adapdata(adap, priv);
-+
-+ /* print module version information */
-+ dev_dbg(&pdev->dev, "module id=%u revision=%u\n",
-+ (i2c_r32(id) & I2C_ID_ID_MASK) >> I2C_ID_ID_OFFSET,
-+ (i2c_r32(id) & I2C_ID_REV_MASK) >> I2C_ID_REV_OFFSET);
-+
-+ /* initialize HW */
-+ ret = falcon_i2c_hw_init(adap);
-+ if (ret) {
-+ dev_err(&pdev->dev, "can't configure adapter\n");
-+ goto err_remove_adapter;
-+ }
-+
-+ dev_info(&pdev->dev, "version %s\n", DRV_VERSION);
-+
-+ return 0;
-+
-+err_remove_adapter:
-+ i2c_del_adapter(adap);
-+ platform_set_drvdata(pdev, NULL);
-+
-+err_free_p_irq:
-+ free_irq(priv->irq_p, priv);
-+
-+err_free_err_irq:
-+ free_irq(priv->irq_err, priv);
-+
-+err_free_b_irq:
-+ free_irq(priv->irq_b, priv);
-+
-+err_free_lb_irq:
-+ free_irq(priv->irq_lb, priv);
-+
-+err_unmap_mem:
-+ iounmap(priv->membase);
-+
-+err_release_region:
-+ release_mem_region(mmres->start, resource_size(mmres));
-+
-+err_free_gpio:
-+ gpio_free(108);
-+ gpio_free(107);
-+
-+err_free_priv:
-+ kfree(priv);
-+
-+ return ret;
-+}
-+
-+static int __devexit falcon_i2c_remove(struct platform_device *pdev)
-+{
-+ struct falcon_i2c *priv = platform_get_drvdata(pdev);
-+ struct resource *mmres;
-+
-+ /* disable bus */
-+ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl);
-+
-+ /* remove driver */
-+ platform_set_drvdata(pdev, NULL);
-+ i2c_del_adapter(&priv->adap);
-+
-+ free_irq(priv->irq_lb, priv);
-+ free_irq(priv->irq_b, priv);
-+ free_irq(priv->irq_err, priv);
-+ free_irq(priv->irq_p, priv);
-+
-+ iounmap(priv->membase);
-+
-+ gpio_free(108);
-+ gpio_free(107);
-+
-+ kfree(priv);
-+
-+ mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ release_mem_region(mmres->start, resource_size(mmres));
-+
-+ dev_dbg(&pdev->dev, "removed\n");
-+
-+ return 0;
-+}
-+
-+static struct platform_driver falcon_i2c_driver = {
-+ .probe = falcon_i2c_probe,
-+ .remove = __devexit_p(falcon_i2c_remove),
-+ .driver = {
-+ .name = DRV_NAME,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init falcon_i2c_init(void)
-+{
-+ int ret;
-+
-+ ret = platform_driver_register(&falcon_i2c_driver);
-+
-+ if (ret)
-+ pr_debug(DRV_NAME ": can't register platform driver\n");
-+
-+ return ret;
-+}
-+
-+static void __exit falcon_i2c_exit(void)
-+{
-+ platform_driver_unregister(&falcon_i2c_driver);
-+}
-+
-+module_init(falcon_i2c_init);
-+module_exit(falcon_i2c_exit);
-+
-+MODULE_DESCRIPTION("Lantiq FALC(tm) ON - I2C bus adapter");
-+MODULE_ALIAS("platform:" DRV_NAME);
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_VERSION);
--- /dev/null
+From e125a83872c5b400852efbd451786c42bd395f11 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 27 Aug 2011 20:08:14 +0200
+Subject: [PATCH 40/73] MIPS: lantiq: add xway nand driver
+
+This patch adds a nand driver for XWAY SoCs. The patch makes use of the
+plat_nand driver. As with the EBU NOR driver merged in 3.0, we have the
+endianess swap problem on read. To workaround this problem we make the
+read_byte() callback available via the plat_nand driver causing the nand
+layer to do byte reads.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+
+TODO : memory ranges
+ cs lines
+ plat dev
+ ebu2 and not ebu1 ?
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 2 +
+ arch/mips/lantiq/xway/Makefile | 2 +-
+ arch/mips/lantiq/xway/devices.h | 1 +
+ arch/mips/lantiq/xway/nand.c | 216 ++++++++++++++++++++
+ drivers/mtd/nand/plat_nand.c | 1 +
+ include/linux/mtd/nand.h | 1 +
+ 6 files changed, 222 insertions(+), 1 deletions(-)
+ create mode 100644 arch/mips/lantiq/xway/nand.c
+
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index 3f22acb..ab2d236 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -145,6 +145,8 @@
+ /* register access macros for EBU and CGU */
+ #define ltq_ebu_w32(x, y) ltq_w32((x), ltq_ebu_membase + (y))
+ #define ltq_ebu_r32(x) ltq_r32(ltq_ebu_membase + (x))
++#define ltq_ebu_w32_mask(x, y, z) \
++ ltq_w32_mask(x, y, ltq_ebu_membase + (z))
+ #define ltq_cgu_w32(x, y) ltq_w32((x), ltq_cgu_membase + (y))
+ #define ltq_cgu_r32(x) ltq_r32(ltq_cgu_membase + (x))
+
+diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
+index 9d1a0a2..277aa34 100644
+--- a/arch/mips/lantiq/xway/Makefile
++++ b/arch/mips/lantiq/xway/Makefile
+@@ -1,4 +1,4 @@
+-obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o
++obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o nand.o
+
+ obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
+ obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
+diff --git a/arch/mips/lantiq/xway/devices.h b/arch/mips/lantiq/xway/devices.h
+index e904934..d825cbd 100644
+--- a/arch/mips/lantiq/xway/devices.h
++++ b/arch/mips/lantiq/xway/devices.h
+@@ -16,5 +16,6 @@ extern void ltq_register_gpio(void);
+ extern void ltq_register_gpio_stp(void);
+ extern void ltq_register_ase_asc(void);
+ extern void ltq_register_etop(struct ltq_eth_data *eth);
++extern void xway_register_nand(struct mtd_partition *parts, int count);
+
+ #endif
+diff --git a/arch/mips/lantiq/xway/nand.c b/arch/mips/lantiq/xway/nand.c
+new file mode 100644
+index 0000000..9ab91d8
+--- /dev/null
++++ b/arch/mips/lantiq/xway/nand.c
+@@ -0,0 +1,216 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/mtd/physmap.h>
++#include <linux/mtd/nand.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++
++#include <lantiq_soc.h>
++#include <lantiq_irq.h>
++#include <lantiq_platform.h>
++
++#include "devices.h"
++
++/* nand registers */
++#define LTQ_EBU_NAND_WAIT 0xB4
++#define LTQ_EBU_NAND_ECC0 0xB8
++#define LTQ_EBU_NAND_ECC_AC 0xBC
++#define LTQ_EBU_NAND_CON 0xB0
++#define LTQ_EBU_ADDSEL1 0x24
++
++/* gpio definitions */
++#define PIN_ALE 13
++#define PIN_CLE 24
++#define PIN_CS1 23
++#define PIN_RDY 48 /* NFLASH_READY */
++#define PIN_RD 49 /* NFLASH_READ_N */
++
++#define NAND_CMD_ALE (1 << 2)
++#define NAND_CMD_CLE (1 << 3)
++#define NAND_CMD_CS (1 << 4)
++#define NAND_WRITE_CMD_RESET 0xff
++#define NAND_WRITE_CMD (NAND_CMD_CS | NAND_CMD_CLE)
++#define NAND_WRITE_ADDR (NAND_CMD_CS | NAND_CMD_ALE)
++#define NAND_WRITE_DATA (NAND_CMD_CS)
++#define NAND_READ_DATA (NAND_CMD_CS)
++#define NAND_WAIT_WR_C (1 << 3)
++#define NAND_WAIT_RD (0x1)
++
++#define ADDSEL1_MASK(x) (x << 4)
++#define ADDSEL1_REGEN 1
++#define BUSCON1_SETUP (1 << 22)
++#define BUSCON1_BCGEN_RES (0x3 << 12)
++#define BUSCON1_WAITWRC2 (2 << 8)
++#define BUSCON1_WAITRDC2 (2 << 6)
++#define BUSCON1_HOLDC1 (1 << 4)
++#define BUSCON1_RECOVC1 (1 << 2)
++#define BUSCON1_CMULT4 1
++#define NAND_CON_NANDM 1
++#define NAND_CON_CSMUX (1 << 1)
++#define NAND_CON_CS_P (1 << 4)
++#define NAND_CON_SE_P (1 << 5)
++#define NAND_CON_WP_P (1 << 6)
++#define NAND_CON_PRE_P (1 << 7)
++#define NAND_CON_IN_CS0 0
++#define NAND_CON_OUT_CS0 0
++#define NAND_CON_IN_CS1 (1 << 8)
++#define NAND_CON_OUT_CS1 (1 << 10)
++#define NAND_CON_CE (1 << 20)
++
++#define NAND_BASE_ADDRESS (KSEG1 | 0x14000000)
++
++static const char *part_probes[] = { "cmdlinepart", NULL };
++
++static void xway_select_chip(struct mtd_info *mtd, int chip)
++{
++ switch (chip) {
++ case -1:
++ ltq_ebu_w32_mask(NAND_CON_CE, 0, LTQ_EBU_NAND_CON);
++ ltq_ebu_w32_mask(NAND_CON_NANDM, 0, LTQ_EBU_NAND_CON);
++ break;
++ case 0:
++ ltq_ebu_w32_mask(0, NAND_CON_NANDM, LTQ_EBU_NAND_CON);
++ ltq_ebu_w32_mask(0, NAND_CON_CE, LTQ_EBU_NAND_CON);
++ /* reset the nand chip */
++ while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
++ ;
++ ltq_w32(NAND_WRITE_CMD_RESET,
++ ((u32 *) (NAND_BASE_ADDRESS | NAND_WRITE_CMD)));
++ break;
++ default:
++ BUG();
++ }
++}
++
++static void xway_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl)
++{
++ struct nand_chip *this = mtd->priv;
++
++ if (ctrl & NAND_CTRL_CHANGE) {
++ if (ctrl & NAND_CLE)
++ this->IO_ADDR_W = (void __iomem *)
++ (NAND_BASE_ADDRESS | NAND_WRITE_CMD);
++ else if (ctrl & NAND_ALE)
++ this->IO_ADDR_W = (void __iomem *)
++ (NAND_BASE_ADDRESS | NAND_WRITE_ADDR);
++ }
++
++ if (data != NAND_CMD_NONE) {
++ *(volatile u8*) ((u32) this->IO_ADDR_W) = data;
++ while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
++ ;
++ }
++}
++
++static int xway_dev_ready(struct mtd_info *mtd)
++{
++ return ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_RD;
++}
++
++void nand_write(unsigned int addr, unsigned int val)
++{
++ ltq_w32(val, ((u32 *) (NAND_BASE_ADDRESS | addr)));
++ while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
++ ;
++}
++
++unsigned char xway_read_byte(struct mtd_info *mtd)
++{
++ return ltq_r8((void __iomem *)(NAND_BASE_ADDRESS | (NAND_READ_DATA)));
++}
++
++static void xway_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
++{
++ int i;
++
++ for (i = 0; i < len; i++)
++ {
++ unsigned char res8 = ltq_r8((void __iomem *)(NAND_BASE_ADDRESS | (NAND_READ_DATA)));
++ buf[i] = res8;
++ }
++}
++
++static void xway_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
++{
++ int i;
++
++ for (i = 0; i < len; i++)
++ {
++ ltq_w8(buf[i], ((u32*)(NAND_BASE_ADDRESS | (NAND_WRITE_DATA))));
++ while((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0);
++ }
++}
++
++int xway_probe(struct platform_device *pdev)
++{
++ /* might need this later ?
++ ltq_gpio_request(PIN_CS1, 2, 1, "NAND_CS1");
++ */
++ ltq_gpio_request(&pdev->dev, PIN_CLE, 2, 1, "NAND_CLE");
++ ltq_gpio_request(&pdev->dev, PIN_ALE, 2, 1, "NAND_ALE");
++ if (ltq_is_ar9() || ltq_is_vr9()) {
++ ltq_gpio_request(&pdev->dev, PIN_RDY, 2, 0, "NAND_BSY");
++ ltq_gpio_request(&pdev->dev, PIN_RD, 2, 1, "NAND_RD");
++ }
++
++ ltq_ebu_w32((NAND_BASE_ADDRESS & 0x1fffff00)
++ | ADDSEL1_MASK(3) | ADDSEL1_REGEN, LTQ_EBU_ADDSEL1);
++
++ ltq_ebu_w32(BUSCON1_SETUP | BUSCON1_BCGEN_RES | BUSCON1_WAITWRC2
++ | BUSCON1_WAITRDC2 | BUSCON1_HOLDC1 | BUSCON1_RECOVC1
++ | BUSCON1_CMULT4, LTQ_EBU_BUSCON1);
++
++ ltq_ebu_w32(NAND_CON_NANDM | NAND_CON_CSMUX | NAND_CON_CS_P
++ | NAND_CON_SE_P | NAND_CON_WP_P | NAND_CON_PRE_P
++ | NAND_CON_IN_CS0 | NAND_CON_OUT_CS0, LTQ_EBU_NAND_CON);
++
++ ltq_w32(NAND_WRITE_CMD_RESET,
++ ((u32 *) (NAND_BASE_ADDRESS | NAND_WRITE_CMD)));
++ while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
++ ;
++
++ return 0;
++}
++
++static struct platform_nand_data falcon_flash_nand_data = {
++ .chip = {
++ .nr_chips = 1,
++ .chip_delay = 30,
++ .part_probe_types = part_probes,
++ },
++ .ctrl = {
++ .probe = xway_probe,
++ .cmd_ctrl = xway_cmd_ctrl,
++ .dev_ready = xway_dev_ready,
++ .select_chip = xway_select_chip,
++ .read_byte = xway_read_byte,
++ .read_buf = xway_read_buf,
++ .write_buf = xway_write_buf,
++ }
++};
++
++static struct resource ltq_nand_res =
++ MEM_RES("nand", 0x14000000, 0x7ffffff);
++
++static struct platform_device ltq_flash_nand = {
++ .name = "gen_nand",
++ .id = -1,
++ .num_resources = 1,
++ .resource = <q_nand_res,
++ .dev = {
++ .platform_data = &falcon_flash_nand_data,
++ },
++};
++
++void __init xway_register_nand(struct mtd_partition *parts, int count)
++{
++ falcon_flash_nand_data.chip.partitions = parts;
++ falcon_flash_nand_data.chip.nr_partitions = count;
++ platform_device_register(<q_flash_nand);
++}
+diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
+index ea8e123..9040ba1 100644
+--- a/drivers/mtd/nand/plat_nand.c
++++ b/drivers/mtd/nand/plat_nand.c
+@@ -75,6 +75,7 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
+ data->chip.select_chip = pdata->ctrl.select_chip;
+ data->chip.write_buf = pdata->ctrl.write_buf;
+ data->chip.read_buf = pdata->ctrl.read_buf;
++ data->chip.read_byte = pdata->ctrl.read_byte;
+ data->chip.chip_delay = pdata->chip.chip_delay;
+ data->chip.options |= pdata->chip.options;
+ data->chip.bbt_options |= pdata->chip.bbt_options;
+diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
+index 904131b..80e11b9 100644
+--- a/include/linux/mtd/nand.h
++++ b/include/linux/mtd/nand.h
+@@ -650,6 +650,7 @@ struct platform_nand_ctrl {
+ void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
+ void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
+ void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
++ unsigned char (*read_byte)(struct mtd_info *mtd);
+ void *priv;
+ };
+
+--
+1.7.9.1
+
+++ /dev/null
-From 9c7a6f8804aef7559ee8edcb7466676ee7d00c09 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sat, 27 Aug 2011 20:08:14 +0200
-Subject: [PATCH 41/70] MIPS: lantiq: add xway nand driver
-
-This patch adds a nand driver for XWAY SoCs. The patch makes use of the
-plat_nand driver. As with the EBU NOR driver merged in 3.0, we have the
-endianess swap problem on read. To workaround this problem we make the
-read_byte() callback available via the plat_nand driver causing the nand
-layer to do byte reads.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-
-TODO : memory ranges
- cs lines
- plat dev
- ebu2 and not ebu1 ?
----
- .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 2 +
- arch/mips/lantiq/xway/Makefile | 2 +-
- arch/mips/lantiq/xway/devices.h | 1 +
- arch/mips/lantiq/xway/nand.c | 216 ++++++++++++++++++++
- drivers/mtd/nand/plat_nand.c | 1 +
- include/linux/mtd/nand.h | 1 +
- 6 files changed, 222 insertions(+), 1 deletions(-)
- create mode 100644 arch/mips/lantiq/xway/nand.c
-
---- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-@@ -145,6 +145,8 @@
- /* register access macros for EBU and CGU */
- #define ltq_ebu_w32(x, y) ltq_w32((x), ltq_ebu_membase + (y))
- #define ltq_ebu_r32(x) ltq_r32(ltq_ebu_membase + (x))
-+#define ltq_ebu_w32_mask(x, y, z) \
-+ ltq_w32_mask(x, y, ltq_ebu_membase + (z))
- #define ltq_cgu_w32(x, y) ltq_w32((x), ltq_cgu_membase + (y))
- #define ltq_cgu_r32(x) ltq_r32(ltq_cgu_membase + (x))
-
---- a/arch/mips/lantiq/xway/Makefile
-+++ b/arch/mips/lantiq/xway/Makefile
-@@ -1,4 +1,4 @@
--obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o
-+obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o nand.o
-
- obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
- obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
---- a/arch/mips/lantiq/xway/devices.h
-+++ b/arch/mips/lantiq/xway/devices.h
-@@ -16,5 +16,6 @@ extern void ltq_register_gpio(void);
- extern void ltq_register_gpio_stp(void);
- extern void ltq_register_ase_asc(void);
- extern void ltq_register_etop(struct ltq_eth_data *eth);
-+extern void xway_register_nand(struct mtd_partition *parts, int count);
-
- #endif
---- /dev/null
-+++ b/arch/mips/lantiq/xway/nand.c
-@@ -0,0 +1,216 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/mtd/physmap.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+
-+#include <lantiq_soc.h>
-+#include <lantiq_irq.h>
-+#include <lantiq_platform.h>
-+
-+#include "devices.h"
-+
-+/* nand registers */
-+#define LTQ_EBU_NAND_WAIT 0xB4
-+#define LTQ_EBU_NAND_ECC0 0xB8
-+#define LTQ_EBU_NAND_ECC_AC 0xBC
-+#define LTQ_EBU_NAND_CON 0xB0
-+#define LTQ_EBU_ADDSEL1 0x24
-+
-+/* gpio definitions */
-+#define PIN_ALE 13
-+#define PIN_CLE 24
-+#define PIN_CS1 23
-+#define PIN_RDY 48 /* NFLASH_READY */
-+#define PIN_RD 49 /* NFLASH_READ_N */
-+
-+#define NAND_CMD_ALE (1 << 2)
-+#define NAND_CMD_CLE (1 << 3)
-+#define NAND_CMD_CS (1 << 4)
-+#define NAND_WRITE_CMD_RESET 0xff
-+#define NAND_WRITE_CMD (NAND_CMD_CS | NAND_CMD_CLE)
-+#define NAND_WRITE_ADDR (NAND_CMD_CS | NAND_CMD_ALE)
-+#define NAND_WRITE_DATA (NAND_CMD_CS)
-+#define NAND_READ_DATA (NAND_CMD_CS)
-+#define NAND_WAIT_WR_C (1 << 3)
-+#define NAND_WAIT_RD (0x1)
-+
-+#define ADDSEL1_MASK(x) (x << 4)
-+#define ADDSEL1_REGEN 1
-+#define BUSCON1_SETUP (1 << 22)
-+#define BUSCON1_BCGEN_RES (0x3 << 12)
-+#define BUSCON1_WAITWRC2 (2 << 8)
-+#define BUSCON1_WAITRDC2 (2 << 6)
-+#define BUSCON1_HOLDC1 (1 << 4)
-+#define BUSCON1_RECOVC1 (1 << 2)
-+#define BUSCON1_CMULT4 1
-+#define NAND_CON_NANDM 1
-+#define NAND_CON_CSMUX (1 << 1)
-+#define NAND_CON_CS_P (1 << 4)
-+#define NAND_CON_SE_P (1 << 5)
-+#define NAND_CON_WP_P (1 << 6)
-+#define NAND_CON_PRE_P (1 << 7)
-+#define NAND_CON_IN_CS0 0
-+#define NAND_CON_OUT_CS0 0
-+#define NAND_CON_IN_CS1 (1 << 8)
-+#define NAND_CON_OUT_CS1 (1 << 10)
-+#define NAND_CON_CE (1 << 20)
-+
-+#define NAND_BASE_ADDRESS (KSEG1 | 0x14000000)
-+
-+static const char *part_probes[] = { "cmdlinepart", NULL };
-+
-+static void xway_select_chip(struct mtd_info *mtd, int chip)
-+{
-+ switch (chip) {
-+ case -1:
-+ ltq_ebu_w32_mask(NAND_CON_CE, 0, LTQ_EBU_NAND_CON);
-+ ltq_ebu_w32_mask(NAND_CON_NANDM, 0, LTQ_EBU_NAND_CON);
-+ break;
-+ case 0:
-+ ltq_ebu_w32_mask(0, NAND_CON_NANDM, LTQ_EBU_NAND_CON);
-+ ltq_ebu_w32_mask(0, NAND_CON_CE, LTQ_EBU_NAND_CON);
-+ /* reset the nand chip */
-+ while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
-+ ;
-+ ltq_w32(NAND_WRITE_CMD_RESET,
-+ ((u32 *) (NAND_BASE_ADDRESS | NAND_WRITE_CMD)));
-+ break;
-+ default:
-+ BUG();
-+ }
-+}
-+
-+static void xway_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl)
-+{
-+ struct nand_chip *this = mtd->priv;
-+
-+ if (ctrl & NAND_CTRL_CHANGE) {
-+ if (ctrl & NAND_CLE)
-+ this->IO_ADDR_W = (void __iomem *)
-+ (NAND_BASE_ADDRESS | NAND_WRITE_CMD);
-+ else if (ctrl & NAND_ALE)
-+ this->IO_ADDR_W = (void __iomem *)
-+ (NAND_BASE_ADDRESS | NAND_WRITE_ADDR);
-+ }
-+
-+ if (data != NAND_CMD_NONE) {
-+ *(volatile u8*) ((u32) this->IO_ADDR_W) = data;
-+ while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
-+ ;
-+ }
-+}
-+
-+static int xway_dev_ready(struct mtd_info *mtd)
-+{
-+ return ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_RD;
-+}
-+
-+void nand_write(unsigned int addr, unsigned int val)
-+{
-+ ltq_w32(val, ((u32 *) (NAND_BASE_ADDRESS | addr)));
-+ while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
-+ ;
-+}
-+
-+unsigned char xway_read_byte(struct mtd_info *mtd)
-+{
-+ return ltq_r8((void __iomem *)(NAND_BASE_ADDRESS | (NAND_READ_DATA)));
-+}
-+
-+static void xway_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
-+{
-+ int i;
-+
-+ for (i = 0; i < len; i++)
-+ {
-+ unsigned char res8 = ltq_r8((void __iomem *)(NAND_BASE_ADDRESS | (NAND_READ_DATA)));
-+ buf[i] = res8;
-+ }
-+}
-+
-+static void xway_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
-+{
-+ int i;
-+
-+ for (i = 0; i < len; i++)
-+ {
-+ ltq_w8(buf[i], ((u32*)(NAND_BASE_ADDRESS | (NAND_WRITE_DATA))));
-+ while((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0);
-+ }
-+}
-+
-+int xway_probe(struct platform_device *pdev)
-+{
-+ /* might need this later ?
-+ ltq_gpio_request(PIN_CS1, 2, 1, "NAND_CS1");
-+ */
-+ ltq_gpio_request(&pdev->dev, PIN_CLE, 2, 1, "NAND_CLE");
-+ ltq_gpio_request(&pdev->dev, PIN_ALE, 2, 1, "NAND_ALE");
-+ if (ltq_is_ar9() || ltq_is_vr9()) {
-+ ltq_gpio_request(&pdev->dev, PIN_RDY, 2, 0, "NAND_BSY");
-+ ltq_gpio_request(&pdev->dev, PIN_RD, 2, 1, "NAND_RD");
-+ }
-+
-+ ltq_ebu_w32((NAND_BASE_ADDRESS & 0x1fffff00)
-+ | ADDSEL1_MASK(3) | ADDSEL1_REGEN, LTQ_EBU_ADDSEL1);
-+
-+ ltq_ebu_w32(BUSCON1_SETUP | BUSCON1_BCGEN_RES | BUSCON1_WAITWRC2
-+ | BUSCON1_WAITRDC2 | BUSCON1_HOLDC1 | BUSCON1_RECOVC1
-+ | BUSCON1_CMULT4, LTQ_EBU_BUSCON1);
-+
-+ ltq_ebu_w32(NAND_CON_NANDM | NAND_CON_CSMUX | NAND_CON_CS_P
-+ | NAND_CON_SE_P | NAND_CON_WP_P | NAND_CON_PRE_P
-+ | NAND_CON_IN_CS0 | NAND_CON_OUT_CS0, LTQ_EBU_NAND_CON);
-+
-+ ltq_w32(NAND_WRITE_CMD_RESET,
-+ ((u32 *) (NAND_BASE_ADDRESS | NAND_WRITE_CMD)));
-+ while ((ltq_ebu_r32(LTQ_EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
-+ ;
-+
-+ return 0;
-+}
-+
-+static struct platform_nand_data falcon_flash_nand_data = {
-+ .chip = {
-+ .nr_chips = 1,
-+ .chip_delay = 30,
-+ .part_probe_types = part_probes,
-+ },
-+ .ctrl = {
-+ .probe = xway_probe,
-+ .cmd_ctrl = xway_cmd_ctrl,
-+ .dev_ready = xway_dev_ready,
-+ .select_chip = xway_select_chip,
-+ .read_byte = xway_read_byte,
-+ .read_buf = xway_read_buf,
-+ .write_buf = xway_write_buf,
-+ }
-+};
-+
-+static struct resource ltq_nand_res =
-+ MEM_RES("nand", 0x14000000, 0x7ffffff);
-+
-+static struct platform_device ltq_flash_nand = {
-+ .name = "gen_nand",
-+ .id = -1,
-+ .num_resources = 1,
-+ .resource = <q_nand_res,
-+ .dev = {
-+ .platform_data = &falcon_flash_nand_data,
-+ },
-+};
-+
-+void __init xway_register_nand(struct mtd_partition *parts, int count)
-+{
-+ falcon_flash_nand_data.chip.partitions = parts;
-+ falcon_flash_nand_data.chip.nr_partitions = count;
-+ platform_device_register(<q_flash_nand);
-+}
---- a/drivers/mtd/nand/plat_nand.c
-+++ b/drivers/mtd/nand/plat_nand.c
-@@ -75,6 +75,7 @@ static int __devinit plat_nand_probe(str
- data->chip.select_chip = pdata->ctrl.select_chip;
- data->chip.write_buf = pdata->ctrl.write_buf;
- data->chip.read_buf = pdata->ctrl.read_buf;
-+ data->chip.read_byte = pdata->ctrl.read_byte;
- data->chip.chip_delay = pdata->chip.chip_delay;
- data->chip.options |= pdata->chip.options;
- data->chip.bbt_options |= pdata->chip.bbt_options;
---- a/include/linux/mtd/nand.h
-+++ b/include/linux/mtd/nand.h
-@@ -651,6 +651,7 @@ struct platform_nand_ctrl {
- void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
- void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
- void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
-+ unsigned char (*read_byte)(struct mtd_info *mtd);
- void *priv;
- };
-
--- /dev/null
+From dfa93fd2fa8bab9965ae7359e23d15f9f69af19b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 10 Oct 2011 22:29:13 +0200
+Subject: [PATCH 41/73] SPI: MIPS: lantiq: adds spi xway
+
+---
+ .../mips/include/asm/mach-lantiq/lantiq_platform.h | 9 +
+ .../mips/include/asm/mach-lantiq/xway/lantiq_irq.h | 2 +
+ drivers/spi/Kconfig | 8 +
+ drivers/spi/Makefile | 1 +
+ drivers/spi/spi-xway.c | 1068 ++++++++++++++++++++
+ 5 files changed, 1088 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/spi/spi-xway.c
+
+diff --git a/arch/mips/include/asm/mach-lantiq/lantiq_platform.h b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
+index a305f1d..38ed938 100644
+--- a/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
++++ b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
+@@ -50,4 +50,13 @@ struct ltq_eth_data {
+ int mii_mode;
+ };
+
++
++struct ltq_spi_platform_data {
++ u16 num_chipselect;
++};
++
++struct ltq_spi_controller_data {
++ unsigned gpio;
++};
++
+ #endif
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
+index 2a8d5ad..b7f10e6 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
+@@ -27,6 +27,8 @@
+
+ #define LTQ_SSC_TIR (INT_NUM_IM0_IRL0 + 15)
+ #define LTQ_SSC_RIR (INT_NUM_IM0_IRL0 + 14)
++#define LTQ_SSC_TIR_AR9 (INT_NUM_IM0_IRL0 + 14)
++#define LTQ_SSC_RIR_AR9 (INT_NUM_IM0_IRL0 + 15)
+ #define LTQ_SSC_EIR (INT_NUM_IM0_IRL0 + 16)
+
+ #define LTQ_MEI_DYING_GASP_INT (INT_NUM_IM1_IRL0 + 21)
+diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
+index b8424ba..ca4189c 100644
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -384,6 +384,14 @@ config SPI_NUC900
+ help
+ SPI driver for Nuvoton NUC900 series ARM SoCs
+
++config SPI_XWAY
++ tristate "Lantiq XWAY SPI controller"
++ depends on LANTIQ && SOC_TYPE_XWAY
++ select SPI_BITBANG
++ help
++ This driver supports the Lantiq SoC SPI controller in master
++ mode.
++
+ #
+ # Add new SPI master controllers in alphabetical order above this line
+ #
+diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
+index 570894c..a465d9a 100644
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -59,4 +59,5 @@ obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x0.o
+ obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
+ obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
+ obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
++obj-$(CONFIG_SPI_XWAY) += spi-xway.o
+
+diff --git a/drivers/spi/spi-xway.c b/drivers/spi/spi-xway.c
+new file mode 100644
+index 0000000..016a6d0
+--- /dev/null
++++ b/drivers/spi/spi-xway.c
+@@ -0,0 +1,1068 @@
++/*
++ * Lantiq SoC SPI controller
++ *
++ * Copyright (C) 2011 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/workqueue.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/sched.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/completion.h>
++#include <linux/spinlock.h>
++#include <linux/err.h>
++#include <linux/clk.h>
++#include <linux/gpio.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++
++#include <lantiq_soc.h>
++#include <lantiq_platform.h>
++
++#define LTQ_SPI_CLC 0x00 /* Clock control */
++#define LTQ_SPI_PISEL 0x04 /* Port input select */
++#define LTQ_SPI_ID 0x08 /* Identification */
++#define LTQ_SPI_CON 0x10 /* Control */
++#define LTQ_SPI_STAT 0x14 /* Status */
++#define LTQ_SPI_WHBSTATE 0x18 /* Write HW modified state */
++#define LTQ_SPI_TB 0x20 /* Transmit buffer */
++#define LTQ_SPI_RB 0x24 /* Receive buffer */
++#define LTQ_SPI_RXFCON 0x30 /* Receive FIFO control */
++#define LTQ_SPI_TXFCON 0x34 /* Transmit FIFO control */
++#define LTQ_SPI_FSTAT 0x38 /* FIFO status */
++#define LTQ_SPI_BRT 0x40 /* Baudrate timer */
++#define LTQ_SPI_BRSTAT 0x44 /* Baudrate timer status */
++#define LTQ_SPI_SFCON 0x60 /* Serial frame control */
++#define LTQ_SPI_SFSTAT 0x64 /* Serial frame status */
++#define LTQ_SPI_GPOCON 0x70 /* General purpose output control */
++#define LTQ_SPI_GPOSTAT 0x74 /* General purpose output status */
++#define LTQ_SPI_FGPO 0x78 /* Forced general purpose output */
++#define LTQ_SPI_RXREQ 0x80 /* Receive request */
++#define LTQ_SPI_RXCNT 0x84 /* Receive count */
++#define LTQ_SPI_DMACON 0xEC /* DMA control */
++#define LTQ_SPI_IRNEN 0xF4 /* Interrupt node enable */
++#define LTQ_SPI_IRNICR 0xF8 /* Interrupt node interrupt capture */
++#define LTQ_SPI_IRNCR 0xFC /* Interrupt node control */
++
++#define LTQ_SPI_CLC_SMC_SHIFT 16 /* Clock divider for sleep mode */
++#define LTQ_SPI_CLC_SMC_MASK 0xFF
++#define LTQ_SPI_CLC_RMC_SHIFT 8 /* Clock divider for normal run mode */
++#define LTQ_SPI_CLC_RMC_MASK 0xFF
++#define LTQ_SPI_CLC_DISS BIT(1) /* Disable status bit */
++#define LTQ_SPI_CLC_DISR BIT(0) /* Disable request bit */
++
++#define LTQ_SPI_ID_TXFS_SHIFT 24 /* Implemented TX FIFO size */
++#define LTQ_SPI_ID_TXFS_MASK 0x3F
++#define LTQ_SPI_ID_RXFS_SHIFT 16 /* Implemented RX FIFO size */
++#define LTQ_SPI_ID_RXFS_MASK 0x3F
++#define LTQ_SPI_ID_REV_MASK 0x1F /* Hardware revision number */
++#define LTQ_SPI_ID_CFG BIT(5) /* DMA interface support */
++
++#define LTQ_SPI_CON_BM_SHIFT 16 /* Data width selection */
++#define LTQ_SPI_CON_BM_MASK 0x1F
++#define LTQ_SPI_CON_EM BIT(24) /* Echo mode */
++#define LTQ_SPI_CON_IDLE BIT(23) /* Idle bit value */
++#define LTQ_SPI_CON_ENBV BIT(22) /* Enable byte valid control */
++#define LTQ_SPI_CON_RUEN BIT(12) /* Receive underflow error enable */
++#define LTQ_SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */
++#define LTQ_SPI_CON_AEN BIT(10) /* Abort error enable */
++#define LTQ_SPI_CON_REN BIT(9) /* Receive overflow error enable */
++#define LTQ_SPI_CON_TEN BIT(8) /* Transmit overflow error enable */
++#define LTQ_SPI_CON_LB BIT(7) /* Loopback control */
++#define LTQ_SPI_CON_PO BIT(6) /* Clock polarity control */
++#define LTQ_SPI_CON_PH BIT(5) /* Clock phase control */
++#define LTQ_SPI_CON_HB BIT(4) /* Heading control */
++#define LTQ_SPI_CON_RXOFF BIT(1) /* Switch receiver off */
++#define LTQ_SPI_CON_TXOFF BIT(0) /* Switch transmitter off */
++
++#define LTQ_SPI_STAT_RXBV_MASK 0x7
++#define LTQ_SPI_STAT_RXBV_SHIFT 28
++#define LTQ_SPI_STAT_BSY BIT(13) /* Busy flag */
++#define LTQ_SPI_STAT_RUE BIT(12) /* Receive underflow error flag */
++#define LTQ_SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */
++#define LTQ_SPI_STAT_AE BIT(10) /* Abort error flag */
++#define LTQ_SPI_STAT_RE BIT(9) /* Receive error flag */
++#define LTQ_SPI_STAT_TE BIT(8) /* Transmit error flag */
++#define LTQ_SPI_STAT_MS BIT(1) /* Master/slave select bit */
++#define LTQ_SPI_STAT_EN BIT(0) /* Enable bit */
++
++#define LTQ_SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */
++#define LTQ_SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */
++#define LTQ_SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */
++#define LTQ_SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */
++#define LTQ_SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */
++#define LTQ_SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */
++#define LTQ_SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */
++#define LTQ_SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */
++#define LTQ_SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */
++#define LTQ_SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */
++#define LTQ_SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */
++#define LTQ_SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */
++#define LTQ_SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */
++#define LTQ_SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */
++#define LTQ_SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */
++#define LTQ_SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */
++#define LTQ_SPI_WHBSTATE_CLR_ERRORS 0x0F50
++
++#define LTQ_SPI_RXFCON_RXFITL_SHIFT 8 /* FIFO interrupt trigger level */
++#define LTQ_SPI_RXFCON_RXFITL_MASK 0x3F
++#define LTQ_SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */
++#define LTQ_SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */
++
++#define LTQ_SPI_TXFCON_TXFITL_SHIFT 8 /* FIFO interrupt trigger level */
++#define LTQ_SPI_TXFCON_TXFITL_MASK 0x3F
++#define LTQ_SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */
++#define LTQ_SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */
++
++#define LTQ_SPI_FSTAT_RXFFL_MASK 0x3f
++#define LTQ_SPI_FSTAT_RXFFL_SHIFT 0
++#define LTQ_SPI_FSTAT_TXFFL_MASK 0x3f
++#define LTQ_SPI_FSTAT_TXFFL_SHIFT 8
++
++#define LTQ_SPI_GPOCON_ISCSBN_SHIFT 8
++#define LTQ_SPI_GPOCON_INVOUTN_SHIFT 0
++
++#define LTQ_SPI_FGPO_SETOUTN_SHIFT 8
++#define LTQ_SPI_FGPO_CLROUTN_SHIFT 0
++
++#define LTQ_SPI_RXREQ_RXCNT_MASK 0xFFFF /* Receive count value */
++#define LTQ_SPI_RXCNT_TODO_MASK 0xFFFF /* Recevie to-do value */
++
++#define LTQ_SPI_IRNEN_F BIT(3) /* Frame end interrupt request */
++#define LTQ_SPI_IRNEN_E BIT(2) /* Error end interrupt request */
++#define LTQ_SPI_IRNEN_T BIT(1) /* Transmit end interrupt request */
++#define LTQ_SPI_IRNEN_R BIT(0) /* Receive end interrupt request */
++#define LTQ_SPI_IRNEN_ALL 0xF
++
++/* Hard-wired GPIOs used by SPI controller */
++#define LTQ_SPI_GPIO_DI 16
++#define LTQ_SPI_GPIO_DO 17
++#define LTQ_SPI_GPIO_CLK 18
++
++struct ltq_spi {
++ struct spi_bitbang bitbang;
++ struct completion done;
++ spinlock_t lock;
++
++ struct device *dev;
++ void __iomem *base;
++ struct clk *fpiclk;
++ struct clk *spiclk;
++
++ int status;
++ int irq[3];
++
++ const u8 *tx;
++ u8 *rx;
++ u32 tx_cnt;
++ u32 rx_cnt;
++ u32 len;
++ struct spi_transfer *curr_transfer;
++
++ u32 (*get_tx) (struct ltq_spi *);
++
++ u16 txfs;
++ u16 rxfs;
++ unsigned dma_support:1;
++ unsigned cfg_mode:1;
++
++};
++
++struct ltq_spi_controller_state {
++ void (*cs_activate) (struct spi_device *);
++ void (*cs_deactivate) (struct spi_device *);
++};
++
++struct ltq_spi_irq_map {
++ char *name;
++ irq_handler_t handler;
++};
++
++struct ltq_spi_cs_gpio_map {
++ unsigned gpio;
++ unsigned mux;
++};
++
++static inline struct ltq_spi *ltq_spi_to_hw(struct spi_device *spi)
++{
++ return spi_master_get_devdata(spi->master);
++}
++
++static inline u32 ltq_spi_reg_read(struct ltq_spi *hw, u32 reg)
++{
++ return ioread32be(hw->base + reg);
++}
++
++static inline void ltq_spi_reg_write(struct ltq_spi *hw, u32 val, u32 reg)
++{
++ iowrite32be(val, hw->base + reg);
++}
++
++static inline void ltq_spi_reg_setbit(struct ltq_spi *hw, u32 bits, u32 reg)
++{
++ u32 val;
++
++ val = ltq_spi_reg_read(hw, reg);
++ val |= bits;
++ ltq_spi_reg_write(hw, val, reg);
++}
++
++static inline void ltq_spi_reg_clearbit(struct ltq_spi *hw, u32 bits, u32 reg)
++{
++ u32 val;
++
++ val = ltq_spi_reg_read(hw, reg);
++ val &= ~bits;
++ ltq_spi_reg_write(hw, val, reg);
++}
++
++static void ltq_spi_hw_enable(struct ltq_spi *hw)
++{
++ u32 clc;
++
++ /* Power-up mdule */
++ clk_enable(hw->spiclk);
++
++ /*
++ * Set clock divider for run mode to 1 to
++ * run at same frequency as FPI bus
++ */
++ clc = (1 << LTQ_SPI_CLC_RMC_SHIFT);
++ ltq_spi_reg_write(hw, clc, LTQ_SPI_CLC);
++}
++
++static void ltq_spi_hw_disable(struct ltq_spi *hw)
++{
++ /* Set clock divider to 0 and set module disable bit */
++ ltq_spi_reg_write(hw, LTQ_SPI_CLC_DISS, LTQ_SPI_CLC);
++
++ /* Power-down mdule */
++ clk_disable(hw->spiclk);
++}
++
++static void ltq_spi_reset_fifos(struct ltq_spi *hw)
++{
++ u32 val;
++
++ /*
++ * Enable and flush FIFOs. Set interrupt trigger level to
++ * half of FIFO count implemented in hardware.
++ */
++ if (hw->txfs > 1) {
++ val = hw->txfs << (LTQ_SPI_TXFCON_TXFITL_SHIFT - 1);
++ val |= LTQ_SPI_TXFCON_TXFEN | LTQ_SPI_TXFCON_TXFLU;
++ ltq_spi_reg_write(hw, val, LTQ_SPI_TXFCON);
++ }
++
++ if (hw->rxfs > 1) {
++ val = hw->rxfs << (LTQ_SPI_RXFCON_RXFITL_SHIFT - 1);
++ val |= LTQ_SPI_RXFCON_RXFEN | LTQ_SPI_RXFCON_RXFLU;
++ ltq_spi_reg_write(hw, val, LTQ_SPI_RXFCON);
++ }
++}
++
++static inline int ltq_spi_wait_ready(struct ltq_spi *hw)
++{
++ u32 stat;
++ unsigned long timeout;
++
++ timeout = jiffies + msecs_to_jiffies(200);
++
++ do {
++ stat = ltq_spi_reg_read(hw, LTQ_SPI_STAT);
++ if (!(stat & LTQ_SPI_STAT_BSY))
++ return 0;
++
++ cond_resched();
++ } while (!time_after_eq(jiffies, timeout));
++
++ dev_err(hw->dev, "SPI wait ready timed out\n");
++
++ return -ETIMEDOUT;
++}
++
++static void ltq_spi_config_mode_set(struct ltq_spi *hw)
++{
++ if (hw->cfg_mode)
++ return;
++
++ /*
++ * Putting the SPI module in config mode is only safe if no
++ * transfer is in progress as indicated by busy flag STATE.BSY.
++ */
++ if (ltq_spi_wait_ready(hw)) {
++ ltq_spi_reset_fifos(hw);
++ hw->status = -ETIMEDOUT;
++ }
++ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLREN, LTQ_SPI_WHBSTATE);
++
++ hw->cfg_mode = 1;
++}
++
++static void ltq_spi_run_mode_set(struct ltq_spi *hw)
++{
++ if (!hw->cfg_mode)
++ return;
++
++ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETEN, LTQ_SPI_WHBSTATE);
++
++ hw->cfg_mode = 0;
++}
++
++static u32 ltq_spi_tx_word_u8(struct ltq_spi *hw)
++{
++ const u8 *tx = hw->tx;
++ u32 data = *tx++;
++
++ hw->tx_cnt++;
++ hw->tx++;
++
++ return data;
++}
++
++static u32 ltq_spi_tx_word_u16(struct ltq_spi *hw)
++{
++ const u16 *tx = (u16 *) hw->tx;
++ u32 data = *tx++;
++
++ hw->tx_cnt += 2;
++ hw->tx += 2;
++
++ return data;
++}
++
++static u32 ltq_spi_tx_word_u32(struct ltq_spi *hw)
++{
++ const u32 *tx = (u32 *) hw->tx;
++ u32 data = *tx++;
++
++ hw->tx_cnt += 4;
++ hw->tx += 4;
++
++ return data;
++}
++
++static void ltq_spi_bits_per_word_set(struct spi_device *spi)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ u32 bm;
++ u8 bits_per_word = spi->bits_per_word;
++
++ /*
++ * Use either default value of SPI device or value
++ * from current transfer.
++ */
++ if (hw->curr_transfer && hw->curr_transfer->bits_per_word)
++ bits_per_word = hw->curr_transfer->bits_per_word;
++
++ if (bits_per_word <= 8)
++ hw->get_tx = ltq_spi_tx_word_u8;
++ else if (bits_per_word <= 16)
++ hw->get_tx = ltq_spi_tx_word_u16;
++ else if (bits_per_word <= 32)
++ hw->get_tx = ltq_spi_tx_word_u32;
++
++ /* CON.BM value = bits_per_word - 1 */
++ bm = (bits_per_word - 1) << LTQ_SPI_CON_BM_SHIFT;
++
++ ltq_spi_reg_clearbit(hw, LTQ_SPI_CON_BM_MASK <<
++ LTQ_SPI_CON_BM_SHIFT, LTQ_SPI_CON);
++ ltq_spi_reg_setbit(hw, bm, LTQ_SPI_CON);
++}
++
++static void ltq_spi_speed_set(struct spi_device *spi)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ u32 br, max_speed_hz, spi_clk;
++ u32 speed_hz = spi->max_speed_hz;
++
++ /*
++ * Use either default value of SPI device or value
++ * from current transfer.
++ */
++ if (hw->curr_transfer && hw->curr_transfer->speed_hz)
++ speed_hz = hw->curr_transfer->speed_hz;
++
++ /*
++ * SPI module clock is derived from FPI bus clock dependent on
++ * divider value in CLC.RMS which is always set to 1.
++ */
++ spi_clk = clk_get_rate(hw->fpiclk);
++
++ /*
++ * Maximum SPI clock frequency in master mode is half of
++ * SPI module clock frequency. Maximum reload value of
++ * baudrate generator BR is 2^16.
++ */
++ max_speed_hz = spi_clk / 2;
++ if (speed_hz >= max_speed_hz)
++ br = 0;
++ else
++ br = (max_speed_hz / speed_hz) - 1;
++
++ if (br > 0xFFFF)
++ br = 0xFFFF;
++
++ ltq_spi_reg_write(hw, br, LTQ_SPI_BRT);
++}
++
++static void ltq_spi_clockmode_set(struct spi_device *spi)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ u32 con;
++
++ con = ltq_spi_reg_read(hw, LTQ_SPI_CON);
++
++ /*
++ * SPI mode mapping in CON register:
++ * Mode CPOL CPHA CON.PO CON.PH
++ * 0 0 0 0 1
++ * 1 0 1 0 0
++ * 2 1 0 1 1
++ * 3 1 1 1 0
++ */
++ if (spi->mode & SPI_CPHA)
++ con &= ~LTQ_SPI_CON_PH;
++ else
++ con |= LTQ_SPI_CON_PH;
++
++ if (spi->mode & SPI_CPOL)
++ con |= LTQ_SPI_CON_PO;
++ else
++ con &= ~LTQ_SPI_CON_PO;
++
++ /* Set heading control */
++ if (spi->mode & SPI_LSB_FIRST)
++ con &= ~LTQ_SPI_CON_HB;
++ else
++ con |= LTQ_SPI_CON_HB;
++
++ ltq_spi_reg_write(hw, con, LTQ_SPI_CON);
++}
++
++static void ltq_spi_xmit_set(struct ltq_spi *hw, struct spi_transfer *t)
++{
++ u32 con;
++
++ con = ltq_spi_reg_read(hw, LTQ_SPI_CON);
++
++ if (t) {
++ if (t->tx_buf && t->rx_buf) {
++ con &= ~(LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF);
++ } else if (t->rx_buf) {
++ con &= ~LTQ_SPI_CON_RXOFF;
++ con |= LTQ_SPI_CON_TXOFF;
++ } else if (t->tx_buf) {
++ con &= ~LTQ_SPI_CON_TXOFF;
++ con |= LTQ_SPI_CON_RXOFF;
++ }
++ } else
++ con |= (LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF);
++
++ ltq_spi_reg_write(hw, con, LTQ_SPI_CON);
++}
++
++static void ltq_spi_gpio_cs_activate(struct spi_device *spi)
++{
++ struct ltq_spi_controller_data *cdata = spi->controller_data;
++ int val = spi->mode & SPI_CS_HIGH ? 1 : 0;
++
++ gpio_set_value(cdata->gpio, val);
++}
++
++static void ltq_spi_gpio_cs_deactivate(struct spi_device *spi)
++{
++ struct ltq_spi_controller_data *cdata = spi->controller_data;
++ int val = spi->mode & SPI_CS_HIGH ? 0 : 1;
++
++ gpio_set_value(cdata->gpio, val);
++}
++
++static void ltq_spi_internal_cs_activate(struct spi_device *spi)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ u32 fgpo;
++
++ fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_CLROUTN_SHIFT));
++ ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
++}
++
++static void ltq_spi_internal_cs_deactivate(struct spi_device *spi)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ u32 fgpo;
++
++ fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT));
++ ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
++}
++
++static void ltq_spi_chipselect(struct spi_device *spi, int cs)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ struct ltq_spi_controller_state *cstate = spi->controller_state;
++
++ switch (cs) {
++ case BITBANG_CS_ACTIVE:
++ ltq_spi_bits_per_word_set(spi);
++ ltq_spi_speed_set(spi);
++ ltq_spi_clockmode_set(spi);
++ ltq_spi_run_mode_set(hw);
++
++ cstate->cs_activate(spi);
++ break;
++
++ case BITBANG_CS_INACTIVE:
++ cstate->cs_deactivate(spi);
++
++ ltq_spi_config_mode_set(hw);
++
++ break;
++ }
++}
++
++static int ltq_spi_setup_transfer(struct spi_device *spi,
++ struct spi_transfer *t)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ u8 bits_per_word = spi->bits_per_word;
++
++ hw->curr_transfer = t;
++
++ if (t && t->bits_per_word)
++ bits_per_word = t->bits_per_word;
++
++ if (bits_per_word > 32)
++ return -EINVAL;
++
++ ltq_spi_config_mode_set(hw);
++
++ return 0;
++}
++
++static const struct ltq_spi_cs_gpio_map ltq_spi_cs[] = {
++ { 15, 2 },
++ { 22, 2 },
++ { 13, 1 },
++ { 10, 1 },
++ { 9, 1 },
++ { 11, 3 },
++};
++
++static int ltq_spi_setup(struct spi_device *spi)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ struct ltq_spi_controller_data *cdata = spi->controller_data;
++ struct ltq_spi_controller_state *cstate;
++ u32 gpocon, fgpo;
++ int ret;
++
++ /* Set default word length to 8 if not set */
++ if (!spi->bits_per_word)
++ spi->bits_per_word = 8;
++
++ if (spi->bits_per_word > 32)
++ return -EINVAL;
++
++ if (!spi->controller_state) {
++ cstate = kzalloc(sizeof(struct ltq_spi_controller_state),
++ GFP_KERNEL);
++ if (!cstate)
++ return -ENOMEM;
++
++ spi->controller_state = cstate;
++ } else
++ return 0;
++
++ /*
++ * Up to six GPIOs can be connected to the SPI module
++ * via GPIO alternate function to control the chip select lines.
++ * For more flexibility in board layout this driver can also control
++ * the CS lines via GPIO API. If GPIOs should be used, board setup code
++ * have to register the SPI device with struct ltq_spi_controller_data
++ * attached.
++ */
++ if (cdata && cdata->gpio) {
++ ret = gpio_request(cdata->gpio, "spi-cs");
++ if (ret)
++ return -EBUSY;
++
++ ret = spi->mode & SPI_CS_HIGH ? 0 : 1;
++ gpio_direction_output(cdata->gpio, ret);
++
++ cstate->cs_activate = ltq_spi_gpio_cs_activate;
++ cstate->cs_deactivate = ltq_spi_gpio_cs_deactivate;
++ } else {
++ ret = ltq_gpio_request(&spi->dev, ltq_spi_cs[spi->chip_select].gpio,
++ ltq_spi_cs[spi->chip_select].mux,
++ 1, "spi-cs");
++ if (ret)
++ return -EBUSY;
++
++ gpocon = (1 << (spi->chip_select +
++ LTQ_SPI_GPOCON_ISCSBN_SHIFT));
++
++ if (spi->mode & SPI_CS_HIGH)
++ gpocon |= (1 << spi->chip_select);
++
++ fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT));
++
++ ltq_spi_reg_setbit(hw, gpocon, LTQ_SPI_GPOCON);
++ ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
++
++ cstate->cs_activate = ltq_spi_internal_cs_activate;
++ cstate->cs_deactivate = ltq_spi_internal_cs_deactivate;
++ }
++
++ return 0;
++}
++
++static void ltq_spi_cleanup(struct spi_device *spi)
++{
++ struct ltq_spi_controller_data *cdata = spi->controller_data;
++ struct ltq_spi_controller_state *cstate = spi->controller_state;
++ unsigned gpio;
++
++ if (cdata && cdata->gpio)
++ gpio = cdata->gpio;
++ else
++ gpio = ltq_spi_cs[spi->chip_select].gpio;
++
++ gpio_free(gpio);
++ kfree(cstate);
++}
++
++static void ltq_spi_txfifo_write(struct ltq_spi *hw)
++{
++ u32 fstat, data;
++ u16 fifo_space;
++
++ /* Determine how much FIFOs are free for TX data */
++ fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT);
++ fifo_space = hw->txfs - ((fstat >> LTQ_SPI_FSTAT_TXFFL_SHIFT) &
++ LTQ_SPI_FSTAT_TXFFL_MASK);
++
++ if (!fifo_space)
++ return;
++
++ while (hw->tx_cnt < hw->len && fifo_space) {
++ data = hw->get_tx(hw);
++ ltq_spi_reg_write(hw, data, LTQ_SPI_TB);
++ fifo_space--;
++ }
++}
++
++static void ltq_spi_rxfifo_read(struct ltq_spi *hw)
++{
++ u32 fstat, data, *rx32;
++ u16 fifo_fill;
++ u8 rxbv, shift, *rx8;
++
++ /* Determine how much FIFOs are filled with RX data */
++ fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT);
++ fifo_fill = ((fstat >> LTQ_SPI_FSTAT_RXFFL_SHIFT)
++ & LTQ_SPI_FSTAT_RXFFL_MASK);
++
++ if (!fifo_fill)
++ return;
++
++ /*
++ * The 32 bit FIFO is always used completely independent from the
++ * bits_per_word value. Thus four bytes have to be read at once
++ * per FIFO.
++ */
++ rx32 = (u32 *) hw->rx;
++ while (hw->len - hw->rx_cnt >= 4 && fifo_fill) {
++ *rx32++ = ltq_spi_reg_read(hw, LTQ_SPI_RB);
++ hw->rx_cnt += 4;
++ hw->rx += 4;
++ fifo_fill--;
++ }
++
++ /*
++ * If there are remaining bytes, read byte count from STAT.RXBV
++ * register and read the data byte-wise.
++ */
++ while (fifo_fill && hw->rx_cnt < hw->len) {
++ rxbv = (ltq_spi_reg_read(hw, LTQ_SPI_STAT) >>
++ LTQ_SPI_STAT_RXBV_SHIFT) & LTQ_SPI_STAT_RXBV_MASK;
++ data = ltq_spi_reg_read(hw, LTQ_SPI_RB);
++
++ shift = (rxbv - 1) * 8;
++ rx8 = hw->rx;
++
++ while (rxbv) {
++ *rx8++ = (data >> shift) & 0xFF;
++ rxbv--;
++ shift -= 8;
++ hw->rx_cnt++;
++ hw->rx++;
++ }
++
++ fifo_fill--;
++ }
++}
++
++static void ltq_spi_rxreq_set(struct ltq_spi *hw)
++{
++ u32 rxreq, rxreq_max, rxtodo;
++
++ rxtodo = ltq_spi_reg_read(hw, LTQ_SPI_RXCNT) & LTQ_SPI_RXCNT_TODO_MASK;
++
++ /*
++ * In RX-only mode the serial clock is activated only after writing
++ * the expected amount of RX bytes into RXREQ register.
++ * To avoid receive overflows at high clocks it is better to request
++ * only the amount of bytes that fits into all FIFOs. This value
++ * depends on the FIFO size implemented in hardware.
++ */
++ rxreq = hw->len - hw->rx_cnt;
++ rxreq_max = hw->rxfs << 2;
++ rxreq = min(rxreq_max, rxreq);
++
++ if (!rxtodo && rxreq)
++ ltq_spi_reg_write(hw, rxreq, LTQ_SPI_RXREQ);
++}
++
++static inline void ltq_spi_complete(struct ltq_spi *hw)
++{
++ complete(&hw->done);
++}
++
++irqreturn_t ltq_spi_tx_irq(int irq, void *data)
++{
++ struct ltq_spi *hw = data;
++ unsigned long flags;
++ int completed = 0;
++
++ spin_lock_irqsave(&hw->lock, flags);
++
++ if (hw->tx_cnt < hw->len)
++ ltq_spi_txfifo_write(hw);
++
++ if (hw->tx_cnt == hw->len)
++ completed = 1;
++
++ spin_unlock_irqrestore(&hw->lock, flags);
++
++ if (completed)
++ ltq_spi_complete(hw);
++
++ return IRQ_HANDLED;
++}
++
++irqreturn_t ltq_spi_rx_irq(int irq, void *data)
++{
++ struct ltq_spi *hw = data;
++ unsigned long flags;
++ int completed = 0;
++
++ spin_lock_irqsave(&hw->lock, flags);
++
++ if (hw->rx_cnt < hw->len) {
++ ltq_spi_rxfifo_read(hw);
++
++ if (hw->tx && hw->tx_cnt < hw->len)
++ ltq_spi_txfifo_write(hw);
++ }
++
++ if (hw->rx_cnt == hw->len)
++ completed = 1;
++ else if (!hw->tx)
++ ltq_spi_rxreq_set(hw);
++
++ spin_unlock_irqrestore(&hw->lock, flags);
++
++ if (completed)
++ ltq_spi_complete(hw);
++
++ return IRQ_HANDLED;
++}
++
++irqreturn_t ltq_spi_err_irq(int irq, void *data)
++{
++ struct ltq_spi *hw = data;
++ unsigned long flags;
++
++ spin_lock_irqsave(&hw->lock, flags);
++
++ /* Disable all interrupts */
++ ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN);
++
++ /* Clear all error flags */
++ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
++
++ /* Flush FIFOs */
++ ltq_spi_reg_setbit(hw, LTQ_SPI_RXFCON_RXFLU, LTQ_SPI_RXFCON);
++ ltq_spi_reg_setbit(hw, LTQ_SPI_TXFCON_TXFLU, LTQ_SPI_TXFCON);
++
++ hw->status = -EIO;
++ spin_unlock_irqrestore(&hw->lock, flags);
++
++ ltq_spi_complete(hw);
++
++ return IRQ_HANDLED;
++}
++
++static int ltq_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
++{
++ struct ltq_spi *hw = ltq_spi_to_hw(spi);
++ u32 irq_flags = 0;
++
++ hw->tx = t->tx_buf;
++ hw->rx = t->rx_buf;
++ hw->len = t->len;
++ hw->tx_cnt = 0;
++ hw->rx_cnt = 0;
++ hw->status = 0;
++ INIT_COMPLETION(hw->done);
++
++ ltq_spi_xmit_set(hw, t);
++
++ /* Enable error interrupts */
++ ltq_spi_reg_setbit(hw, LTQ_SPI_IRNEN_E, LTQ_SPI_IRNEN);
++
++ if (hw->tx) {
++ /* Initially fill TX FIFO with as much data as possible */
++ ltq_spi_txfifo_write(hw);
++ irq_flags |= LTQ_SPI_IRNEN_T;
++
++ /* Always enable RX interrupt in Full Duplex mode */
++ if (hw->rx)
++ irq_flags |= LTQ_SPI_IRNEN_R;
++ } else if (hw->rx) {
++ /* Start RX clock */
++ ltq_spi_rxreq_set(hw);
++
++ /* Enable RX interrupt to receive data from RX FIFOs */
++ irq_flags |= LTQ_SPI_IRNEN_R;
++ }
++
++ /* Enable TX or RX interrupts */
++ ltq_spi_reg_setbit(hw, irq_flags, LTQ_SPI_IRNEN);
++ wait_for_completion_interruptible(&hw->done);
++
++ /* Disable all interrupts */
++ ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN);
++
++ /*
++ * Return length of current transfer for bitbang utility code if
++ * no errors occured during transmission.
++ */
++ if (!hw->status)
++ hw->status = hw->len;
++
++ return hw->status;
++}
++
++static const struct ltq_spi_irq_map ltq_spi_irqs[] = {
++ { "spi_tx", ltq_spi_tx_irq },
++ { "spi_rx", ltq_spi_rx_irq },
++ { "spi_err", ltq_spi_err_irq },
++};
++
++static int __init ltq_spi_probe(struct platform_device *pdev)
++{
++ struct spi_master *master;
++ struct resource *r;
++ struct ltq_spi *hw;
++ struct ltq_spi_platform_data *pdata = pdev->dev.platform_data;
++ int ret, i;
++ u32 data, id;
++
++ master = spi_alloc_master(&pdev->dev, sizeof(struct ltq_spi));
++ if (!master) {
++ dev_err(&pdev->dev, "spi_alloc_master\n");
++ ret = -ENOMEM;
++ goto err;
++ }
++
++ hw = spi_master_get_devdata(master);
++
++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (r == NULL) {
++ dev_err(&pdev->dev, "platform_get_resource\n");
++ ret = -ENOENT;
++ goto err_master;
++ }
++
++ r = devm_request_mem_region(&pdev->dev, r->start, resource_size(r),
++ pdev->name);
++ if (!r) {
++ dev_err(&pdev->dev, "devm_request_mem_region\n");
++ ret = -ENXIO;
++ goto err_master;
++ }
++
++ hw->base = devm_ioremap_nocache(&pdev->dev, r->start, resource_size(r));
++ if (!hw->base) {
++ dev_err(&pdev->dev, "devm_ioremap_nocache\n");
++ ret = -ENXIO;
++ goto err_master;
++ }
++
++ hw->fpiclk = clk_get_fpi();
++ if (IS_ERR(hw->fpiclk)) {
++ dev_err(&pdev->dev, "clk_get\n");
++ ret = PTR_ERR(hw->fpiclk);
++ goto err_master;
++ }
++
++ hw->spiclk = clk_get(&pdev->dev, NULL);
++ if (IS_ERR(hw->spiclk)) {
++ dev_err(&pdev->dev, "clk_get\n");
++ ret = PTR_ERR(hw->spiclk);
++ goto err_master;
++ }
++
++ memset(hw->irq, 0, sizeof(hw->irq));
++ for (i = 0; i < ARRAY_SIZE(ltq_spi_irqs); i++) {
++ ret = platform_get_irq_byname(pdev, ltq_spi_irqs[i].name);
++ if (0 > ret) {
++ dev_err(&pdev->dev, "platform_get_irq_byname\n");
++ goto err_irq;
++ }
++
++ hw->irq[i] = ret;
++ ret = request_irq(hw->irq[i], ltq_spi_irqs[i].handler,
++ 0, ltq_spi_irqs[i].name, hw);
++ if (ret) {
++ dev_err(&pdev->dev, "request_irq\n");
++ goto err_irq;
++ }
++ }
++
++ hw->bitbang.master = spi_master_get(master);
++ hw->bitbang.chipselect = ltq_spi_chipselect;
++ hw->bitbang.setup_transfer = ltq_spi_setup_transfer;
++ hw->bitbang.txrx_bufs = ltq_spi_txrx_bufs;
++
++ master->bus_num = pdev->id;
++ master->num_chipselect = pdata->num_chipselect;
++ master->setup = ltq_spi_setup;
++ master->cleanup = ltq_spi_cleanup;
++
++ hw->dev = &pdev->dev;
++ init_completion(&hw->done);
++ spin_lock_init(&hw->lock);
++
++ /* Set GPIO alternate functions to SPI */
++ ltq_gpio_request(&pdev->dev, LTQ_SPI_GPIO_DI, 2, 0, "spi-di");
++ ltq_gpio_request(&pdev->dev, LTQ_SPI_GPIO_DO, 2, 1, "spi-do");
++ ltq_gpio_request(&pdev->dev, LTQ_SPI_GPIO_CLK, 2, 1, "spi-clk");
++
++ ltq_spi_hw_enable(hw);
++
++ /* Read module capabilities */
++ id = ltq_spi_reg_read(hw, LTQ_SPI_ID);
++ hw->txfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK;
++ hw->rxfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK;
++ hw->dma_support = (id & LTQ_SPI_ID_CFG) ? 1 : 0;
++
++ ltq_spi_config_mode_set(hw);
++
++ /* Enable error checking, disable TX/RX, set idle value high */
++ data = LTQ_SPI_CON_RUEN | LTQ_SPI_CON_AEN |
++ LTQ_SPI_CON_TEN | LTQ_SPI_CON_REN |
++ LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF | LTQ_SPI_CON_IDLE;
++ ltq_spi_reg_write(hw, data, LTQ_SPI_CON);
++
++ /* Enable master mode and clear error flags */
++ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETMS |
++ LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
++
++ /* Reset GPIO/CS registers */
++ ltq_spi_reg_write(hw, 0x0, LTQ_SPI_GPOCON);
++ ltq_spi_reg_write(hw, 0xFF00, LTQ_SPI_FGPO);
++
++ /* Enable and flush FIFOs */
++ ltq_spi_reset_fifos(hw);
++
++ ret = spi_bitbang_start(&hw->bitbang);
++ if (ret) {
++ dev_err(&pdev->dev, "spi_bitbang_start\n");
++ goto err_bitbang;
++ }
++
++ platform_set_drvdata(pdev, hw);
++
++ pr_info("Lantiq SoC SPI controller rev %u (TXFS %u, RXFS %u, DMA %u)\n",
++ id & LTQ_SPI_ID_REV_MASK, hw->txfs, hw->rxfs, hw->dma_support);
++
++ return 0;
++
++err_bitbang:
++ ltq_spi_hw_disable(hw);
++
++err_irq:
++ clk_put(hw->fpiclk);
++
++ for (; i > 0; i--)
++ free_irq(hw->irq[i], hw);
++
++err_master:
++ spi_master_put(master);
++
++err:
++ return ret;
++}
++
++static int __exit ltq_spi_remove(struct platform_device *pdev)
++{
++ struct ltq_spi *hw = platform_get_drvdata(pdev);
++ int ret, i;
++
++ ret = spi_bitbang_stop(&hw->bitbang);
++ if (ret)
++ return ret;
++
++ platform_set_drvdata(pdev, NULL);
++
++ ltq_spi_config_mode_set(hw);
++ ltq_spi_hw_disable(hw);
++
++ for (i = 0; i < ARRAY_SIZE(hw->irq); i++)
++ if (0 < hw->irq[i])
++ free_irq(hw->irq[i], hw);
++
++ gpio_free(LTQ_SPI_GPIO_DI);
++ gpio_free(LTQ_SPI_GPIO_DO);
++ gpio_free(LTQ_SPI_GPIO_CLK);
++
++ clk_put(hw->fpiclk);
++ spi_master_put(hw->bitbang.master);
++
++ return 0;
++}
++
++static struct platform_driver ltq_spi_driver = {
++ .driver = {
++ .name = "ltq_spi",
++ .owner = THIS_MODULE,
++ },
++ .remove = __exit_p(ltq_spi_remove),
++};
++
++static int __init ltq_spi_init(void)
++{
++ return platform_driver_probe(<q_spi_driver, ltq_spi_probe);
++}
++module_init(ltq_spi_init);
++
++static void __exit ltq_spi_exit(void)
++{
++ platform_driver_unregister(<q_spi_driver);
++}
++module_exit(ltq_spi_exit);
++
++MODULE_DESCRIPTION("Lantiq SoC SPI controller driver");
++MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:ltq-spi");
+--
+1.7.9.1
+
--- /dev/null
+From 29be0a0cb78942568ea4dc164a86da1bcf7b3ad6 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 9 Mar 2012 19:03:40 +0100
+Subject: [PATCH 42/73] NET: adds driver for lantiq vr9 ethernet
+
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 2 +-
+ arch/mips/lantiq/xway/devices.c | 20 +
+ arch/mips/lantiq/xway/devices.h | 1 +
+ drivers/net/ethernet/Kconfig | 6 +
+ drivers/net/ethernet/Makefile | 1 +
+ drivers/net/ethernet/lantiq_vrx200.c | 1358 ++++++++++++++++++++
+ 6 files changed, 1387 insertions(+), 1 deletions(-)
+ create mode 100644 drivers/net/ethernet/lantiq_vrx200.c
+
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index ab2d236..d1b8cc8 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -102,7 +102,7 @@
+
+ /* GBIT - gigabit switch */
+ #define LTQ_GBIT_BASE_ADDR 0x1E108000
+-#define LTQ_GBIT_SIZE 0x200
++#define LTQ_GBIT_SIZE 0x4000
+
+ /* DMA */
+ #define LTQ_DMA_BASE_ADDR 0x1E104100
+diff --git a/arch/mips/lantiq/xway/devices.c b/arch/mips/lantiq/xway/devices.c
+index eab4644d..5efa4f3 100644
+--- a/arch/mips/lantiq/xway/devices.c
++++ b/arch/mips/lantiq/xway/devices.c
+@@ -83,6 +83,7 @@ static struct platform_device ltq_etop = {
+ .name = "ltq_etop",
+ .resource = ltq_etop_resources,
+ .num_resources = 1,
++ .id = -1,
+ };
+
+ void __init
+@@ -96,3 +97,22 @@ ltq_register_etop(struct ltq_eth_data *eth)
+ platform_device_register(<q_etop);
+ }
+ }
++
++/* ethernet */
++static struct resource ltq_vrx200_resources[] = {
++ MEM_RES("gbit", LTQ_GBIT_BASE_ADDR, LTQ_GBIT_SIZE),
++};
++
++static struct platform_device ltq_vrx200 = {
++ .name = "ltq_vrx200",
++ .resource = ltq_vrx200_resources,
++ .num_resources = 1,
++ .id = -1,
++};
++
++void __init
++ltq_register_vrx200(struct ltq_eth_data *eth)
++{
++ ltq_vrx200.dev.platform_data = eth;
++ platform_device_register(<q_vrx200);
++}
+diff --git a/arch/mips/lantiq/xway/devices.h b/arch/mips/lantiq/xway/devices.h
+index d825cbd..08befd9 100644
+--- a/arch/mips/lantiq/xway/devices.h
++++ b/arch/mips/lantiq/xway/devices.h
+@@ -17,5 +17,6 @@ extern void ltq_register_gpio_stp(void);
+ extern void ltq_register_ase_asc(void);
+ extern void ltq_register_etop(struct ltq_eth_data *eth);
+ extern void xway_register_nand(struct mtd_partition *parts, int count);
++extern void ltq_register_vrx200(struct ltq_eth_data *eth);
+
+ #endif
+diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
+index 597f4d4..2035cab 100644
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -84,6 +84,12 @@ config LANTIQ_ETOP
+ ---help---
+ Support for the MII0 inside the Lantiq SoC
+
++config LANTIQ_VRX200
++ tristate "Lantiq SoC vrx200 driver"
++ depends on SOC_TYPE_XWAY
++ ---help---
++ Support for the MII0 inside the Lantiq SoC
++
+ source "drivers/net/ethernet/marvell/Kconfig"
+ source "drivers/net/ethernet/mellanox/Kconfig"
+ source "drivers/net/ethernet/micrel/Kconfig"
+diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
+index be5dde0..4fde2be 100644
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -35,6 +35,7 @@ obj-$(CONFIG_IP1000) += icplus/
+ obj-$(CONFIG_JME) += jme.o
+ obj-$(CONFIG_KORINA) += korina.o
+ obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
++obj-$(CONFIG_LANTIQ_VRX200) += lantiq_vrx200.o
+ obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
+ obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
+ obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
+diff --git a/drivers/net/ethernet/lantiq_vrx200.c b/drivers/net/ethernet/lantiq_vrx200.c
+new file mode 100644
+index 0000000..d79d380
+--- /dev/null
++++ b/drivers/net/ethernet/lantiq_vrx200.c
+@@ -0,0 +1,1358 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/errno.h>
++#include <linux/types.h>
++#include <linux/interrupt.h>
++#include <linux/uaccess.h>
++#include <linux/in.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/phy.h>
++#include <linux/ip.h>
++#include <linux/tcp.h>
++#include <linux/skbuff.h>
++#include <linux/mm.h>
++#include <linux/platform_device.h>
++#include <linux/ethtool.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/dma-mapping.h>
++#include <linux/module.h>
++#include <linux/clk.h>
++
++#include <asm/checksum.h>
++
++#include <lantiq_soc.h>
++#include <xway_dma.h>
++#include <lantiq_platform.h>
++
++#define LTQ_SWITCH_BASE 0x1E108000
++#define LTQ_SWITCH_CORE_BASE LTQ_SWITCH_BASE
++#define LTQ_SWITCH_TOP_PDI_BASE LTQ_SWITCH_CORE_BASE
++#define LTQ_SWITCH_BM_PDI_BASE (LTQ_SWITCH_CORE_BASE + 4 * 0x40)
++#define LTQ_SWITCH_MAC_PDI_0_BASE (LTQ_SWITCH_CORE_BASE + 4 * 0x900)
++#define LTQ_SWITCH_MAC_PDI_X_BASE(x) (LTQ_SWITCH_MAC_PDI_0_BASE + x * 0x30)
++#define LTQ_SWITCH_TOPLEVEL_BASE (LTQ_SWITCH_BASE + 4 * 0xC40)
++#define LTQ_SWITCH_MDIO_PDI_BASE (LTQ_SWITCH_TOPLEVEL_BASE)
++#define LTQ_SWITCH_MII_PDI_BASE (LTQ_SWITCH_TOPLEVEL_BASE + 4 * 0x36)
++#define LTQ_SWITCH_PMAC_PDI_BASE (LTQ_SWITCH_TOPLEVEL_BASE + 4 * 0x82)
++
++#define LTQ_ETHSW_MAC_CTRL0_PADEN (1 << 8)
++#define LTQ_ETHSW_MAC_CTRL0_FCS (1 << 7)
++#define LTQ_ETHSW_MAC_CTRL1_SHORTPRE (1 << 8)
++#define LTQ_ETHSW_MAC_CTRL2_MLEN (1 << 3)
++#define LTQ_ETHSW_MAC_CTRL2_LCHKL (1 << 2)
++#define LTQ_ETHSW_MAC_CTRL2_LCHKS_DIS 0
++#define LTQ_ETHSW_MAC_CTRL2_LCHKS_UNTAG 1
++#define LTQ_ETHSW_MAC_CTRL2_LCHKS_TAG 2
++#define LTQ_ETHSW_MAC_CTRL6_RBUF_DLY_WP_SHIFT 9
++#define LTQ_ETHSW_MAC_CTRL6_RXBUF_BYPASS (1 << 6)
++#define LTQ_ETHSW_GLOB_CTRL_SE (1 << 15)
++#define LTQ_ETHSW_MDC_CFG1_MCEN (1 << 8)
++#define LTQ_ETHSW_PMAC_HD_CTL_FC (1 << 10)
++#define LTQ_ETHSW_PMAC_HD_CTL_RC (1 << 4)
++#define LTQ_ETHSW_PMAC_HD_CTL_AC (1 << 2)
++#define ADVERTIZE_MPD (1 << 10)
++
++#define MDIO_DEVAD_NONE (-1)
++
++#define LTQ_ETH_RX_BUFFER_CNT PKTBUFSRX
++
++#define LTQ_MDIO_DRV_NAME "ltq-mdio"
++#define LTQ_ETH_DRV_NAME "ltq-eth"
++
++#define LTQ_ETHSW_MAX_GMAC 1
++#define LTQ_ETHSW_PMAC 1
++
++#define ltq_setbits(a, set) \
++ ltq_w32(ltq_r32(a) | (set), a)
++
++enum ltq_reset_modules {
++ LTQ_RESET_CORE,
++ LTQ_RESET_DMA,
++ LTQ_RESET_ETH,
++ LTQ_RESET_PHY,
++ LTQ_RESET_HARD,
++ LTQ_RESET_SOFT,
++};
++
++static inline void
++dbg_ltq_writel(void *a, unsigned int b)
++{
++ ltq_w32(b, a);
++}
++
++int ltq_reset_once(enum ltq_reset_modules module, ulong usec);
++
++struct ltq_ethsw_mac_pdi_x_regs {
++ u32 pstat; /* Port status */
++ u32 pisr; /* Interrupt status */
++ u32 pier; /* Interrupt enable */
++ u32 ctrl_0; /* Control 0 */
++ u32 ctrl_1; /* Control 1 */
++ u32 ctrl_2; /* Control 2 */
++ u32 ctrl_3; /* Control 3 */
++ u32 ctrl_4; /* Control 4 */
++ u32 ctrl_5; /* Control 5 */
++ u32 ctrl_6; /* Control 6 */
++ u32 bufst; /* TX/RX buffer control */
++ u32 testen; /* Test enable */
++};
++
++struct ltq_ethsw_mac_pdi_regs {
++ struct ltq_ethsw_mac_pdi_x_regs mac[12];
++};
++
++struct ltq_ethsw_mdio_pdi_regs {
++ u32 glob_ctrl; /* Global control 0 */
++ u32 rsvd0[7];
++ u32 mdio_ctrl; /* MDIO control */
++ u32 mdio_read; /* MDIO read data */
++ u32 mdio_write; /* MDIO write data */
++ u32 mdc_cfg_0; /* MDC clock configuration 0 */
++ u32 mdc_cfg_1; /* MDC clock configuration 1 */
++ u32 rsvd[3];
++ u32 phy_addr_5; /* PHY address port 5 */
++ u32 phy_addr_4; /* PHY address port 4 */
++ u32 phy_addr_3; /* PHY address port 3 */
++ u32 phy_addr_2; /* PHY address port 2 */
++ u32 phy_addr_1; /* PHY address port 1 */
++ u32 phy_addr_0; /* PHY address port 0 */
++ u32 mdio_stat_0; /* MDIO PHY polling status port 0 */
++ u32 mdio_stat_1; /* MDIO PHY polling status port 1 */
++ u32 mdio_stat_2; /* MDIO PHY polling status port 2 */
++ u32 mdio_stat_3; /* MDIO PHY polling status port 3 */
++ u32 mdio_stat_4; /* MDIO PHY polling status port 4 */
++ u32 mdio_stat_5; /* MDIO PHY polling status port 5 */
++};
++
++struct ltq_ethsw_mii_pdi_regs {
++ u32 mii_cfg0; /* xMII port 0 configuration */
++ u32 pcdu0; /* Port 0 clock delay configuration */
++ u32 mii_cfg1; /* xMII port 1 configuration */
++ u32 pcdu1; /* Port 1 clock delay configuration */
++ u32 mii_cfg2; /* xMII port 2 configuration */
++ u32 rsvd0;
++ u32 mii_cfg3; /* xMII port 3 configuration */
++ u32 rsvd1;
++ u32 mii_cfg4; /* xMII port 4 configuration */
++ u32 rsvd2;
++ u32 mii_cfg5; /* xMII port 5 configuration */
++ u32 pcdu5; /* Port 5 clock delay configuration */
++};
++
++struct ltq_ethsw_pmac_pdi_regs {
++ u32 hd_ctl; /* PMAC header control */
++ u32 tl; /* PMAC type/length */
++ u32 sa1; /* PMAC source address 1 */
++ u32 sa2; /* PMAC source address 2 */
++ u32 sa3; /* PMAC source address 3 */
++ u32 da1; /* PMAC destination address 1 */
++ u32 da2; /* PMAC destination address 2 */
++ u32 da3; /* PMAC destination address 3 */
++ u32 vlan; /* PMAC VLAN */
++ u32 rx_ipg; /* PMAC interpacket gap in RX direction */
++ u32 st_etype; /* PMAC special tag ethertype */
++ u32 ewan; /* PMAC ethernet WAN group */
++};
++
++struct ltq_mdio_phy_addr_reg {
++ union {
++ struct {
++ unsigned rsvd:1;
++ unsigned lnkst:2; /* Link status control */
++ unsigned speed:2; /* Speed control */
++ unsigned fdup:2; /* Full duplex control */
++ unsigned fcontx:2; /* Flow control mode TX */
++ unsigned fconrx:2; /* Flow control mode RX */
++ unsigned addr:5; /* PHY address */
++ } bits;
++ u16 val;
++ };
++};
++
++enum ltq_mdio_phy_addr_lnkst {
++ LTQ_MDIO_PHY_ADDR_LNKST_AUTO = 0,
++ LTQ_MDIO_PHY_ADDR_LNKST_UP = 1,
++ LTQ_MDIO_PHY_ADDR_LNKST_DOWN = 2,
++};
++
++enum ltq_mdio_phy_addr_speed {
++ LTQ_MDIO_PHY_ADDR_SPEED_M10 = 0,
++ LTQ_MDIO_PHY_ADDR_SPEED_M100 = 1,
++ LTQ_MDIO_PHY_ADDR_SPEED_G1 = 2,
++ LTQ_MDIO_PHY_ADDR_SPEED_AUTO = 3,
++};
++
++enum ltq_mdio_phy_addr_fdup {
++ LTQ_MDIO_PHY_ADDR_FDUP_AUTO = 0,
++ LTQ_MDIO_PHY_ADDR_FDUP_ENABLE = 1,
++ LTQ_MDIO_PHY_ADDR_FDUP_DISABLE = 3,
++};
++
++enum ltq_mdio_phy_addr_fcon {
++ LTQ_MDIO_PHY_ADDR_FCON_AUTO = 0,
++ LTQ_MDIO_PHY_ADDR_FCON_ENABLE = 1,
++ LTQ_MDIO_PHY_ADDR_FCON_DISABLE = 3,
++};
++
++struct ltq_mii_mii_cfg_reg {
++ union {
++ struct {
++ unsigned res:1; /* Hardware reset */
++ unsigned en:1; /* xMII interface enable */
++ unsigned isol:1; /* xMII interface isolate */
++ unsigned ldclkdis:1; /* Link down clock disable */
++ unsigned rsvd:1;
++ unsigned crs:2; /* CRS sensitivity config */
++ unsigned rgmii_ibs:1; /* RGMII In Band status */
++ unsigned rmii:1; /* RMII ref clock direction */
++ unsigned miirate:3; /* xMII interface clock rate */
++ unsigned miimode:4; /* xMII interface mode */
++ } bits;
++ u16 val;
++ };
++};
++
++enum ltq_mii_mii_cfg_miirate {
++ LTQ_MII_MII_CFG_MIIRATE_M2P5 = 0,
++ LTQ_MII_MII_CFG_MIIRATE_M25 = 1,
++ LTQ_MII_MII_CFG_MIIRATE_M125 = 2,
++ LTQ_MII_MII_CFG_MIIRATE_M50 = 3,
++ LTQ_MII_MII_CFG_MIIRATE_AUTO = 4,
++};
++
++enum ltq_mii_mii_cfg_miimode {
++ LTQ_MII_MII_CFG_MIIMODE_MIIP = 0,
++ LTQ_MII_MII_CFG_MIIMODE_MIIM = 1,
++ LTQ_MII_MII_CFG_MIIMODE_RMIIP = 2,
++ LTQ_MII_MII_CFG_MIIMODE_RMIIM = 3,
++ LTQ_MII_MII_CFG_MIIMODE_RGMII = 4,
++};
++
++struct ltq_eth_priv {
++ struct ltq_dma_device *dma_dev;
++ struct mii_dev *bus;
++ struct eth_device *dev;
++ struct phy_device *phymap[LTQ_ETHSW_MAX_GMAC];
++ int rx_num;
++};
++
++enum ltq_mdio_mbusy {
++ LTQ_MDIO_MBUSY_IDLE = 0,
++ LTQ_MDIO_MBUSY_BUSY = 1,
++};
++
++enum ltq_mdio_op {
++ LTQ_MDIO_OP_WRITE = 1,
++ LTQ_MDIO_OP_READ = 2,
++};
++
++struct ltq_mdio_access {
++ union {
++ struct {
++ unsigned rsvd:3;
++ unsigned mbusy:1;
++ unsigned op:2;
++ unsigned phyad:5;
++ unsigned regad:5;
++ } bits;
++ u16 val;
++ };
++};
++
++enum LTQ_ETH_PORT_FLAGS {
++ LTQ_ETH_PORT_NONE = 0,
++ LTQ_ETH_PORT_PHY = 1,
++ LTQ_ETH_PORT_SWITCH = (1 << 1),
++ LTQ_ETH_PORT_MAC = (1 << 2),
++};
++
++struct ltq_eth_port_config {
++ u8 num;
++ u8 phy_addr;
++ u16 flags;
++ phy_interface_t phy_if;
++};
++
++struct ltq_eth_board_config {
++ const struct ltq_eth_port_config *ports;
++ int num_ports;
++};
++
++static const struct ltq_eth_port_config eth_port_config[] = {
++ /* GMAC0: external Lantiq PEF7071 10/100/1000 PHY for LAN port 0 */
++ { 0, 0x0, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++ /* GMAC1: external Lantiq PEF7071 10/100/1000 PHY for LAN port 1 */
++ { 1, 0x1, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
++};
++
++static const struct ltq_eth_board_config board_config = {
++ .ports = eth_port_config,
++ .num_ports = ARRAY_SIZE(eth_port_config),
++};
++
++static struct ltq_ethsw_mac_pdi_regs *ltq_ethsw_mac_pdi_regs =
++ (struct ltq_ethsw_mac_pdi_regs *) CKSEG1ADDR(LTQ_SWITCH_MAC_PDI_0_BASE);
++
++static struct ltq_ethsw_mdio_pdi_regs *ltq_ethsw_mdio_pdi_regs =
++ (struct ltq_ethsw_mdio_pdi_regs *) CKSEG1ADDR(LTQ_SWITCH_MDIO_PDI_BASE);
++
++static struct ltq_ethsw_mii_pdi_regs *ltq_ethsw_mii_pdi_regs =
++ (struct ltq_ethsw_mii_pdi_regs *) CKSEG1ADDR(LTQ_SWITCH_MII_PDI_BASE);
++
++static struct ltq_ethsw_pmac_pdi_regs *ltq_ethsw_pmac_pdi_regs =
++ (struct ltq_ethsw_pmac_pdi_regs *) CKSEG1ADDR(LTQ_SWITCH_PMAC_PDI_BASE);
++
++
++#define MAX_DMA_CHAN 0x8
++#define MAX_DMA_CRC_LEN 0x4
++#define MAX_DMA_DATA_LEN 0x600
++
++/* use 2 static channels for TX/RX
++ depending on the SoC we need to use different DMA channels for ethernet */
++#define LTQ_ETOP_TX_CHANNEL 1
++#define LTQ_ETOP_RX_CHANNEL 0
++
++#define IS_TX(x) (x == LTQ_ETOP_TX_CHANNEL)
++#define IS_RX(x) (x == LTQ_ETOP_RX_CHANNEL)
++
++#define DRV_VERSION "1.0"
++
++static void __iomem *ltq_vrx200_membase;
++
++struct ltq_vrx200_chan {
++ int idx;
++ int tx_free;
++ struct net_device *netdev;
++ struct napi_struct napi;
++ struct ltq_dma_channel dma;
++ struct sk_buff *skb[LTQ_DESC_NUM];
++};
++
++struct ltq_vrx200_priv {
++ struct net_device *netdev;
++ struct ltq_eth_data *pldata;
++ struct resource *res;
++
++ struct mii_bus *mii_bus;
++ struct phy_device *phydev;
++
++ struct ltq_vrx200_chan ch[MAX_DMA_CHAN];
++ int tx_free[MAX_DMA_CHAN >> 1];
++
++ spinlock_t lock;
++
++ struct clk *clk_ppe;
++};
++
++static int ltq_vrx200_mdio_wr(struct mii_bus *bus, int phy_addr,
++ int phy_reg, u16 phy_data);
++
++static int
++ltq_vrx200_alloc_skb(struct ltq_vrx200_chan *ch)
++{
++ ch->skb[ch->dma.desc] = dev_alloc_skb(MAX_DMA_DATA_LEN);
++ if (!ch->skb[ch->dma.desc])
++ return -ENOMEM;
++ ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
++ ch->skb[ch->dma.desc]->data, MAX_DMA_DATA_LEN,
++ DMA_FROM_DEVICE);
++ ch->dma.desc_base[ch->dma.desc].addr =
++ CPHYSADDR(ch->skb[ch->dma.desc]->data);
++ ch->dma.desc_base[ch->dma.desc].ctl =
++ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
++ MAX_DMA_DATA_LEN;
++ skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN);
++ return 0;
++}
++
++static void
++ltq_vrx200_hw_receive(struct ltq_vrx200_chan *ch)
++{
++ struct ltq_vrx200_priv *priv = netdev_priv(ch->netdev);
++ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
++ struct sk_buff *skb = ch->skb[ch->dma.desc];
++ int len = (desc->ctl & LTQ_DMA_SIZE_MASK) - MAX_DMA_CRC_LEN;
++ unsigned long flags;
++
++ spin_lock_irqsave(&priv->lock, flags);
++ if (ltq_vrx200_alloc_skb(ch)) {
++ netdev_err(ch->netdev,
++ "failed to allocate new rx buffer, stopping DMA\n");
++ ltq_dma_close(&ch->dma);
++ }
++ ch->dma.desc++;
++ ch->dma.desc %= LTQ_DESC_NUM;
++ spin_unlock_irqrestore(&priv->lock, flags);
++
++ skb_put(skb, len);
++ skb->dev = ch->netdev;
++ skb->protocol = eth_type_trans(skb, ch->netdev);
++ netif_receive_skb(skb);
++}
++
++static int
++ltq_vrx200_poll_rx(struct napi_struct *napi, int budget)
++{
++ struct ltq_vrx200_chan *ch = container_of(napi,
++ struct ltq_vrx200_chan, napi);
++ struct ltq_vrx200_priv *priv = netdev_priv(ch->netdev);
++ int rx = 0;
++ int complete = 0;
++ unsigned long flags;
++
++ while ((rx < budget) && !complete) {
++ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
++
++ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
++ ltq_vrx200_hw_receive(ch);
++ rx++;
++ } else {
++ complete = 1;
++ }
++ }
++ if (complete || !rx) {
++ napi_complete(&ch->napi);
++ spin_lock_irqsave(&priv->lock, flags);
++ ltq_dma_ack_irq(&ch->dma);
++ spin_unlock_irqrestore(&priv->lock, flags);
++ }
++ return rx;
++}
++
++static int
++ltq_vrx200_poll_tx(struct napi_struct *napi, int budget)
++{
++ struct ltq_vrx200_chan *ch =
++ container_of(napi, struct ltq_vrx200_chan, napi);
++ struct ltq_vrx200_priv *priv = netdev_priv(ch->netdev);
++ struct netdev_queue *txq =
++ netdev_get_tx_queue(ch->netdev, ch->idx >> 1);
++ unsigned long flags;
++
++ spin_lock_irqsave(&priv->lock, flags);
++ while ((ch->dma.desc_base[ch->tx_free].ctl &
++ (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
++ dev_kfree_skb_any(ch->skb[ch->tx_free]);
++ ch->skb[ch->tx_free] = NULL;
++ memset(&ch->dma.desc_base[ch->tx_free], 0,
++ sizeof(struct ltq_dma_desc));
++ ch->tx_free++;
++ ch->tx_free %= LTQ_DESC_NUM;
++ }
++ spin_unlock_irqrestore(&priv->lock, flags);
++
++ if (netif_tx_queue_stopped(txq))
++ netif_tx_start_queue(txq);
++ napi_complete(&ch->napi);
++ spin_lock_irqsave(&priv->lock, flags);
++ ltq_dma_ack_irq(&ch->dma);
++ spin_unlock_irqrestore(&priv->lock, flags);
++ return 1;
++}
++
++static irqreturn_t
++ltq_vrx200_dma_irq(int irq, void *_priv)
++{
++ struct ltq_vrx200_priv *priv = _priv;
++ int ch = irq - LTQ_DMA_ETOP;
++
++ napi_schedule(&priv->ch[ch].napi);
++ return IRQ_HANDLED;
++}
++
++static void
++ltq_vrx200_free_channel(struct net_device *dev, struct ltq_vrx200_chan *ch)
++{
++ struct ltq_vrx200_priv *priv = netdev_priv(dev);
++
++ ltq_dma_free(&ch->dma);
++ if (ch->dma.irq)
++ free_irq(ch->dma.irq, priv);
++ if (IS_RX(ch->idx)) {
++ int desc;
++ for (desc = 0; desc < LTQ_DESC_NUM; desc++)
++ dev_kfree_skb_any(ch->skb[ch->dma.desc]);
++ }
++}
++
++static void
++ltq_vrx200_hw_exit(struct net_device *dev)
++{
++ struct ltq_vrx200_priv *priv = netdev_priv(dev);
++ int i;
++
++ clk_disable(priv->clk_ppe);
++
++ for (i = 0; i < MAX_DMA_CHAN; i++)
++ if (IS_TX(i) || IS_RX(i))
++ ltq_vrx200_free_channel(dev, &priv->ch[i]);
++}
++
++static void *ltq_eth_phy_addr_reg(int num)
++{
++ switch (num) {
++ case 0:
++ return <q_ethsw_mdio_pdi_regs->phy_addr_0;
++ case 1:
++ return <q_ethsw_mdio_pdi_regs->phy_addr_1;
++ case 2:
++ return <q_ethsw_mdio_pdi_regs->phy_addr_2;
++ case 3:
++ return <q_ethsw_mdio_pdi_regs->phy_addr_3;
++ case 4:
++ return <q_ethsw_mdio_pdi_regs->phy_addr_4;
++ case 5:
++ return <q_ethsw_mdio_pdi_regs->phy_addr_5;
++ }
++
++ return NULL;
++}
++
++static void *ltq_eth_mii_cfg_reg(int num)
++{
++ switch (num) {
++ case 0:
++ return <q_ethsw_mii_pdi_regs->mii_cfg0;
++ case 1:
++ return <q_ethsw_mii_pdi_regs->mii_cfg1;
++ case 2:
++ return <q_ethsw_mii_pdi_regs->mii_cfg2;
++ case 3:
++ return <q_ethsw_mii_pdi_regs->mii_cfg3;
++ case 4:
++ return <q_ethsw_mii_pdi_regs->mii_cfg4;
++ case 5:
++ return <q_ethsw_mii_pdi_regs->mii_cfg5;
++ }
++
++ return NULL;
++}
++
++static void ltq_eth_gmac_update(struct phy_device *phydev, int num)
++{
++ struct ltq_mdio_phy_addr_reg phy_addr_reg;
++ struct ltq_mii_mii_cfg_reg mii_cfg_reg;
++ void *phy_addr = ltq_eth_phy_addr_reg(num);
++ void *mii_cfg = ltq_eth_mii_cfg_reg(num);
++
++ phy_addr_reg.val = ltq_r32(phy_addr);
++ mii_cfg_reg.val = ltq_r32(mii_cfg);
++
++ phy_addr_reg.bits.addr = phydev->addr;
++
++ if (phydev->link)
++ phy_addr_reg.bits.lnkst = LTQ_MDIO_PHY_ADDR_LNKST_UP;
++ else
++ phy_addr_reg.bits.lnkst = LTQ_MDIO_PHY_ADDR_LNKST_DOWN;
++
++ switch (phydev->speed) {
++ case SPEED_1000:
++ phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_G1;
++ mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M125;
++ break;
++ case SPEED_100:
++ phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_M100;
++ switch (mii_cfg_reg.bits.miimode) {
++ case LTQ_MII_MII_CFG_MIIMODE_RMIIM:
++ case LTQ_MII_MII_CFG_MIIMODE_RMIIP:
++ mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M50;
++ break;
++ default:
++ mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M25;
++ break;
++ }
++ break;
++ default:
++ phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_M10;
++ mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M2P5;
++ break;
++ }
++
++ if (phydev->duplex == DUPLEX_FULL)
++ phy_addr_reg.bits.fdup = LTQ_MDIO_PHY_ADDR_FDUP_ENABLE;
++ else
++ phy_addr_reg.bits.fdup = LTQ_MDIO_PHY_ADDR_FDUP_DISABLE;
++
++ dbg_ltq_writel(phy_addr, phy_addr_reg.val);
++ dbg_ltq_writel(mii_cfg, mii_cfg_reg.val);
++ udelay(1);
++}
++
++
++static void ltq_eth_port_config(struct ltq_vrx200_priv *priv,
++ const struct ltq_eth_port_config *port)
++{
++ struct ltq_mii_mii_cfg_reg mii_cfg_reg;
++ void *mii_cfg = ltq_eth_mii_cfg_reg(port->num);
++ int setup_gpio = 0;
++
++ mii_cfg_reg.val = ltq_r32(mii_cfg);
++
++
++ switch (port->num) {
++ case 0: /* xMII0 */
++ case 1: /* xMII1 */
++ switch (port->phy_if) {
++ case PHY_INTERFACE_MODE_MII:
++ if (port->flags & LTQ_ETH_PORT_PHY)
++ /* MII MAC mode, connected to external PHY */
++ mii_cfg_reg.bits.miimode =
++ LTQ_MII_MII_CFG_MIIMODE_MIIM;
++ else
++ /* MII PHY mode, connected to external MAC */
++ mii_cfg_reg.bits.miimode =
++ LTQ_MII_MII_CFG_MIIMODE_MIIP;
++ setup_gpio = 1;
++ break;
++ case PHY_INTERFACE_MODE_RMII:
++ if (port->flags & LTQ_ETH_PORT_PHY)
++ /* RMII MAC mode, connected to external PHY */
++ mii_cfg_reg.bits.miimode =
++ LTQ_MII_MII_CFG_MIIMODE_RMIIM;
++ else
++ /* RMII PHY mode, connected to external MAC */
++ mii_cfg_reg.bits.miimode =
++ LTQ_MII_MII_CFG_MIIMODE_RMIIP;
++ setup_gpio = 1;
++ break;
++ case PHY_INTERFACE_MODE_RGMII:
++ /* RGMII MAC mode, connected to external PHY */
++ mii_cfg_reg.bits.miimode =
++ LTQ_MII_MII_CFG_MIIMODE_RGMII;
++ setup_gpio = 1;
++ break;
++ default:
++ break;
++ }
++ break;
++ case 2: /* internal GPHY0 */
++ case 3: /* internal GPHY0 */
++ case 4: /* internal GPHY1 */
++ switch (port->phy_if) {
++ case PHY_INTERFACE_MODE_MII:
++ case PHY_INTERFACE_MODE_GMII:
++ /* MII MAC mode, connected to internal GPHY */
++ mii_cfg_reg.bits.miimode =
++ LTQ_MII_MII_CFG_MIIMODE_MIIM;
++ setup_gpio = 1;
++ break;
++ default:
++ break;
++ }
++ break;
++ case 5: /* internal GPHY1 or xMII2 */
++ switch (port->phy_if) {
++ case PHY_INTERFACE_MODE_MII:
++ /* MII MAC mode, connected to internal GPHY */
++ mii_cfg_reg.bits.miimode =
++ LTQ_MII_MII_CFG_MIIMODE_MIIM;
++ setup_gpio = 1;
++ break;
++ case PHY_INTERFACE_MODE_RGMII:
++ /* RGMII MAC mode, connected to external PHY */
++ mii_cfg_reg.bits.miimode =
++ LTQ_MII_MII_CFG_MIIMODE_RGMII;
++ setup_gpio = 1;
++ break;
++ default:
++ break;
++ }
++ break;
++ default:
++ break;
++ }
++
++ /* Enable MII interface */
++ mii_cfg_reg.bits.en = port->flags ? 1 : 0;
++ dbg_ltq_writel(mii_cfg, mii_cfg_reg.val);
++
++}
++
++static void ltq_eth_gmac_init(int num)
++{
++ struct ltq_mdio_phy_addr_reg phy_addr_reg;
++ struct ltq_mii_mii_cfg_reg mii_cfg_reg;
++ void *phy_addr = ltq_eth_phy_addr_reg(num);
++ void *mii_cfg = ltq_eth_mii_cfg_reg(num);
++ struct ltq_ethsw_mac_pdi_x_regs *mac_pdi_regs;
++
++ mac_pdi_regs = <q_ethsw_mac_pdi_regs->mac[num];
++
++ /* Reset PHY status to link down */
++ phy_addr_reg.val = ltq_r32(phy_addr);
++ phy_addr_reg.bits.addr = num;
++ phy_addr_reg.bits.lnkst = LTQ_MDIO_PHY_ADDR_LNKST_DOWN;
++ phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_M10;
++ phy_addr_reg.bits.fdup = LTQ_MDIO_PHY_ADDR_FDUP_DISABLE;
++ dbg_ltq_writel(phy_addr, phy_addr_reg.val);
++
++ /* Reset and disable MII interface */
++ mii_cfg_reg.val = ltq_r32(mii_cfg);
++ mii_cfg_reg.bits.en = 0;
++ mii_cfg_reg.bits.res = 1;
++ mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M2P5;
++ dbg_ltq_writel(mii_cfg, mii_cfg_reg.val);
++
++ /*
++ * Enable padding of short frames, enable frame checksum generation
++ * in transmit direction
++ */
++ dbg_ltq_writel(&mac_pdi_regs->ctrl_0, LTQ_ETHSW_MAC_CTRL0_PADEN |
++ LTQ_ETHSW_MAC_CTRL0_FCS);
++
++ /* Set inter packet gap size to 12 bytes */
++ dbg_ltq_writel(&mac_pdi_regs->ctrl_1, 12);
++
++ /*
++ * Configure frame length checks:
++ * - allow jumbo frames
++ * - enable long length check
++ * - enable short length without VLAN tags
++ */
++ dbg_ltq_writel(&mac_pdi_regs->ctrl_2, LTQ_ETHSW_MAC_CTRL2_MLEN |
++ LTQ_ETHSW_MAC_CTRL2_LCHKL |
++ LTQ_ETHSW_MAC_CTRL2_LCHKS_UNTAG);
++}
++
++
++static void ltq_eth_pmac_init(void)
++{
++ struct ltq_ethsw_mac_pdi_x_regs *mac_pdi_regs;
++
++ mac_pdi_regs = <q_ethsw_mac_pdi_regs->mac[LTQ_ETHSW_PMAC];
++
++ /*
++ * Enable padding of short frames, enable frame checksum generation
++ * in transmit direction
++ */
++ dbg_ltq_writel(&mac_pdi_regs->ctrl_0, LTQ_ETHSW_MAC_CTRL0_PADEN |
++ LTQ_ETHSW_MAC_CTRL0_FCS);
++
++ /*
++ * Configure frame length checks:
++ * - allow jumbo frames
++ * - enable long length check
++ * - enable short length without VLAN tags
++ */
++ dbg_ltq_writel(&mac_pdi_regs->ctrl_2, LTQ_ETHSW_MAC_CTRL2_MLEN |
++ LTQ_ETHSW_MAC_CTRL2_LCHKL |
++ LTQ_ETHSW_MAC_CTRL2_LCHKS_UNTAG);
++
++ /*
++ * Apply workaround for buffer congestion:
++ * - shorten preambel to 1 byte
++ * - set minimum inter packet gap size to 7 bytes
++ * - enable receive buffer bypass mode
++ */
++ dbg_ltq_writel(&mac_pdi_regs->ctrl_1, LTQ_ETHSW_MAC_CTRL1_SHORTPRE | 7);
++ dbg_ltq_writel(&mac_pdi_regs->ctrl_6,
++ (6 << LTQ_ETHSW_MAC_CTRL6_RBUF_DLY_WP_SHIFT) |
++ LTQ_ETHSW_MAC_CTRL6_RXBUF_BYPASS);
++
++ /* Set request assertion threshold to 8, IPG counter to 11 */
++ dbg_ltq_writel(<q_ethsw_pmac_pdi_regs->rx_ipg, 0x8B);
++
++ /*
++ * Configure frame header control:
++ * - enable reaction on pause frames (flow control)
++ * - remove CRC for packets from PMAC to DMA
++ * - add CRC for packets from DMA to PMAC
++ */
++ dbg_ltq_writel(<q_ethsw_pmac_pdi_regs->hd_ctl, LTQ_ETHSW_PMAC_HD_CTL_FC |
++ /*LTQ_ETHSW_PMAC_HD_CTL_RC | */LTQ_ETHSW_PMAC_HD_CTL_AC);
++}
++
++static int
++ltq_vrx200_hw_init(struct net_device *dev)
++{
++ struct ltq_vrx200_priv *priv = netdev_priv(dev);
++ int err = 0;
++ int i;
++
++ netdev_info(dev, "setting up dma\n");
++ ltq_dma_init_port(DMA_PORT_ETOP);
++
++ netdev_info(dev, "setting up pmu\n");
++ clk_enable(priv->clk_ppe);
++
++ /* Reset ethernet and switch subsystems */
++ netdev_info(dev, "reset core\n");
++ ltq_reset_once(BIT(8), 10);
++
++ /* Enable switch macro */
++ ltq_setbits(<q_ethsw_mdio_pdi_regs->glob_ctrl,
++ LTQ_ETHSW_GLOB_CTRL_SE);
++
++ /* Disable MDIO auto-polling for all ports */
++ dbg_ltq_writel(<q_ethsw_mdio_pdi_regs->mdc_cfg_0, 0);
++
++ /*
++ * Enable and set MDIO management clock to 2.5 MHz. This is the
++ * maximum clock for FE PHYs.
++ * Formula for clock is:
++ *
++ * 50 MHz
++ * x = ----------- - 1
++ * 2 * f_MDC
++ */
++ dbg_ltq_writel(<q_ethsw_mdio_pdi_regs->mdc_cfg_1,
++ LTQ_ETHSW_MDC_CFG1_MCEN | 9);
++
++ /* Init MAC connected to CPU */
++ ltq_eth_pmac_init();
++
++ /* Init MACs connected to external MII interfaces */
++ for (i = 0; i < LTQ_ETHSW_MAX_GMAC; i++)
++ ltq_eth_gmac_init(i);
++
++ for (i = 0; i < MAX_DMA_CHAN && !err; i++) {
++ int irq = LTQ_DMA_ETOP + i;
++ struct ltq_vrx200_chan *ch = &priv->ch[i];
++
++ ch->idx = ch->dma.nr = i;
++
++ if (IS_TX(i)) {
++ ltq_dma_alloc_tx(&ch->dma);
++ err = request_irq(irq, ltq_vrx200_dma_irq, IRQF_DISABLED,
++ "vrx200_tx", priv);
++ } else if (IS_RX(i)) {
++ ltq_dma_alloc_rx(&ch->dma);
++ for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
++ ch->dma.desc++)
++ if (ltq_vrx200_alloc_skb(ch))
++ err = -ENOMEM;
++ ch->dma.desc = 0;
++ err = request_irq(irq, ltq_vrx200_dma_irq, IRQF_DISABLED,
++ "vrx200_rx", priv);
++ }
++ if (!err)
++ ch->dma.irq = irq;
++ }
++ for (i = 0; i < board_config.num_ports; i++)
++ ltq_eth_port_config(priv, &board_config.ports[i]);
++ return err;
++}
++
++static void
++ltq_vrx200_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
++{
++ strcpy(info->driver, "Lantiq ETOP");
++ strcpy(info->bus_info, "internal");
++ strcpy(info->version, DRV_VERSION);
++}
++
++static int
++ltq_vrx200_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
++{
++ struct ltq_vrx200_priv *priv = netdev_priv(dev);
++
++ return phy_ethtool_gset(priv->phydev, cmd);
++}
++
++static int
++ltq_vrx200_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
++{
++ struct ltq_vrx200_priv *priv = netdev_priv(dev);
++
++ return phy_ethtool_sset(priv->phydev, cmd);
++}
++
++static int
++ltq_vrx200_nway_reset(struct net_device *dev)
++{
++ struct ltq_vrx200_priv *priv = netdev_priv(dev);
++
++ return phy_start_aneg(priv->phydev);
++}
++
++static const struct ethtool_ops ltq_vrx200_ethtool_ops = {
++ .get_drvinfo = ltq_vrx200_get_drvinfo,
++ .get_settings = ltq_vrx200_get_settings,
++ .set_settings = ltq_vrx200_set_settings,
++ .nway_reset = ltq_vrx200_nway_reset,
++};
++
++static inline int ltq_mdio_poll(struct mii_bus *bus)
++{
++ struct ltq_mdio_access acc;
++ unsigned cnt = 10000;
++
++ while (likely(cnt--)) {
++ acc.val = ltq_r32(<q_ethsw_mdio_pdi_regs->mdio_ctrl);
++ if (!acc.bits.mbusy)
++ return 0;
++ }
++
++ return 1;
++}
++
++static int
++ltq_vrx200_mdio_wr(struct mii_bus *bus, int addr, int regnum, u16 val)
++{
++ struct ltq_mdio_access acc;
++ int ret;
++
++ acc.val = 0;
++ acc.bits.mbusy = LTQ_MDIO_MBUSY_BUSY;
++ acc.bits.op = LTQ_MDIO_OP_WRITE;
++ acc.bits.phyad = addr;
++ acc.bits.regad = regnum;
++
++ ret = ltq_mdio_poll(bus);
++ if (ret)
++ return ret;
++
++ dbg_ltq_writel(<q_ethsw_mdio_pdi_regs->mdio_write, val);
++ dbg_ltq_writel(<q_ethsw_mdio_pdi_regs->mdio_ctrl, acc.val);
++
++ return 0;
++}
++
++static int
++ltq_vrx200_mdio_rd(struct mii_bus *bus, int addr, int regnum)
++{
++ struct ltq_mdio_access acc;
++ int ret;
++
++ acc.val = 0;
++ acc.bits.mbusy = LTQ_MDIO_MBUSY_BUSY;
++ acc.bits.op = LTQ_MDIO_OP_READ;
++ acc.bits.phyad = addr;
++ acc.bits.regad = regnum;
++
++ ret = ltq_mdio_poll(bus);
++ if (ret)
++ goto timeout;
++
++ dbg_ltq_writel(<q_ethsw_mdio_pdi_regs->mdio_ctrl, acc.val);
++
++ ret = ltq_mdio_poll(bus);
++ if (ret)
++ goto timeout;
++
++ ret = ltq_r32(<q_ethsw_mdio_pdi_regs->mdio_read);
++
++ return ret;
++timeout:
++ return -1;
++}
++
++static void
++ltq_vrx200_mdio_link(struct net_device *dev)
++{
++ struct ltq_vrx200_priv *priv = netdev_priv(dev);
++ ltq_eth_gmac_update(priv->phydev, 0);
++}
++
++static int
++ltq_vrx200_mdio_probe(struct net_device *dev)
++{
++ struct ltq_vrx200_priv *priv = netdev_priv(dev);
++ struct phy_device *phydev = NULL;
++ int val;
++
++ phydev = priv->mii_bus->phy_map[0];
++
++ if (!phydev) {
++ netdev_err(dev, "no PHY found\n");
++ return -ENODEV;
++ }
++
++ phydev = phy_connect(dev, dev_name(&phydev->dev), <q_vrx200_mdio_link,
++ 0, 0);
++
++ if (IS_ERR(phydev)) {
++ netdev_err(dev, "Could not attach to PHY\n");
++ return PTR_ERR(phydev);
++ }
++
++ phydev->supported &= (SUPPORTED_10baseT_Half
++ | SUPPORTED_10baseT_Full
++ | SUPPORTED_100baseT_Half
++ | SUPPORTED_100baseT_Full
++ | SUPPORTED_1000baseT_Half
++ | SUPPORTED_1000baseT_Full
++ | SUPPORTED_Autoneg
++ | SUPPORTED_MII
++ | SUPPORTED_TP);
++ phydev->advertising = phydev->supported;
++ priv->phydev = phydev;
++
++ pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
++ dev->name, phydev->drv->name,
++ dev_name(&phydev->dev), phydev->irq);
++
++ val = ltq_vrx200_mdio_rd(priv->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000);
++ val |= ADVERTIZE_MPD;
++ ltq_vrx200_mdio_wr(priv->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000, val);
++ ltq_vrx200_mdio_wr(priv->mii_bus, 0, 0, 0x1040);
++
++ phy_start_aneg(phydev);
++
++ return 0;
++}
++
++static int
++ltq_vrx200_mdio_init(struct net_device *dev)
++{
++ struct ltq_vrx200_priv *priv = netdev_priv(dev);
++ int i;
++ int err;
++
++ priv->mii_bus = mdiobus_alloc();
++ if (!priv->mii_bus) {
++ netdev_err(dev, "failed to allocate mii bus\n");
++ err = -ENOMEM;
++ goto err_out;
++ }
++
++ priv->mii_bus->priv = dev;
++ priv->mii_bus->read = ltq_vrx200_mdio_rd;
++ priv->mii_bus->write = ltq_vrx200_mdio_wr;
++ priv->mii_bus->name = "ltq_mii";
++ snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
++ priv->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
++ if (!priv->mii_bus->irq) {
++ err = -ENOMEM;
++ goto err_out_free_mdiobus;
++ }
++
++ for (i = 0; i < PHY_MAX_ADDR; ++i)
++ priv->mii_bus->irq[i] = PHY_POLL;
++
++ if (mdiobus_register(priv->mii_bus)) {
++ err = -ENXIO;
++ goto err_out_free_mdio_irq;
++ }
++
++ if (ltq_vrx200_mdio_probe(dev)) {
++ err = -ENXIO;
++ goto err_out_unregister_bus;
++ }
++ return 0;
++
++err_out_unregister_bus:
++ mdiobus_unregister(priv->mii_bus);
++err_out_free_mdio_irq:
++ kfree(priv->mii_bus->irq);
++err_out_free_mdiobus:
++ mdiobus_free(priv->mii_bus);
++err_out:
++ return err;
++}
++
++static void
++ltq_vrx200_mdio_cleanup(struct net_device *dev)
++{
++ struct ltq_vrx200_priv *priv = netdev_priv(dev);
++
++ phy_disconnect(priv->phydev);
++ mdiobus_unregister(priv->mii_bus);
++ kfree(priv->mii_bus->irq);
++ mdiobus_free(priv->mii_bus);
++}
++
++void phy_dump(struct net_device *dev)
++{
++ struct ltq_vrx200_priv *priv = netdev_priv(dev);
++ int i;
++ for (i = 0; i < 0x1F; i++) {
++ unsigned int val = ltq_vrx200_mdio_rd(priv->mii_bus, 0, i);
++ printk("%d %4X\n", i, val);
++ }
++}
++
++static int
++ltq_vrx200_open(struct net_device *dev)
++{
++ struct ltq_vrx200_priv *priv = netdev_priv(dev);
++ int i;
++ unsigned long flags;
++
++ for (i = 0; i < MAX_DMA_CHAN; i++) {
++ struct ltq_vrx200_chan *ch = &priv->ch[i];
++
++ if (!IS_TX(i) && (!IS_RX(i)))
++ continue;
++ napi_enable(&ch->napi);
++ spin_lock_irqsave(&priv->lock, flags);
++ ltq_dma_open(&ch->dma);
++ spin_unlock_irqrestore(&priv->lock, flags);
++ }
++ if (priv->phydev) {
++ phy_start(priv->phydev);
++ phy_dump(dev);
++ }
++ netif_tx_start_all_queues(dev);
++ return 0;
++}
++
++static int
++ltq_vrx200_stop(struct net_device *dev)
++{
++ struct ltq_vrx200_priv *priv = netdev_priv(dev);
++ int i;
++ unsigned long flags;
++
++ netif_tx_stop_all_queues(dev);
++ if (priv->phydev)
++ phy_stop(priv->phydev);
++ for (i = 0; i < MAX_DMA_CHAN; i++) {
++ struct ltq_vrx200_chan *ch = &priv->ch[i];
++
++ if (!IS_RX(i) && !IS_TX(i))
++ continue;
++ napi_disable(&ch->napi);
++ spin_lock_irqsave(&priv->lock, flags);
++ ltq_dma_close(&ch->dma);
++ spin_unlock_irqrestore(&priv->lock, flags);
++ }
++ return 0;
++}
++
++static int
++ltq_vrx200_tx(struct sk_buff *skb, struct net_device *dev)
++{
++ int queue = skb_get_queue_mapping(skb);
++ struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
++ struct ltq_vrx200_priv *priv = netdev_priv(dev);
++ struct ltq_vrx200_chan *ch = &priv->ch[(queue << 1) | 1];
++ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
++ unsigned long flags;
++ u32 byte_offset;
++ int len;
++
++ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
++
++ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
++ netdev_err(dev, "tx ring full\n");
++ netif_tx_stop_queue(txq);
++ return NETDEV_TX_BUSY;
++ }
++
++ /* dma needs to start on a 16 byte aligned address */
++ byte_offset = CPHYSADDR(skb->data) % 16;
++ ch->skb[ch->dma.desc] = skb;
++
++ dev->trans_start = jiffies;
++
++ spin_lock_irqsave(&priv->lock, flags);
++ desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len,
++ DMA_TO_DEVICE)) - byte_offset;
++ wmb();
++ desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
++ LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
++ ch->dma.desc++;
++ ch->dma.desc %= LTQ_DESC_NUM;
++ spin_unlock_irqrestore(&priv->lock, flags);
++
++ if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
++ netif_tx_stop_queue(txq);
++
++ return NETDEV_TX_OK;
++}
++
++static int
++ltq_vrx200_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
++{
++ struct ltq_vrx200_priv *priv = netdev_priv(dev);
++
++ /* TODO: mii-toll reports "No MII transceiver present!." ?!*/
++ return phy_mii_ioctl(priv->phydev, rq, cmd);
++}
++
++static u16
++ltq_vrx200_select_queue(struct net_device *dev, struct sk_buff *skb)
++{
++ /* we are currently only using the first queue */
++ return 0;
++}
++
++static int
++ltq_vrx200_init(struct net_device *dev)
++{
++ struct ltq_vrx200_priv *priv = netdev_priv(dev);
++ struct sockaddr mac;
++ int err;
++
++ ether_setup(dev);
++ dev->watchdog_timeo = 10 * HZ;
++
++ err = ltq_vrx200_hw_init(dev);
++ if (err)
++ goto err_hw;
++
++ memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
++ if (!is_valid_ether_addr(mac.sa_data)) {
++ pr_warn("vrx200: invalid MAC, using random\n");
++ random_ether_addr(mac.sa_data);
++ }
++ eth_mac_addr(dev, &mac);
++
++ if (!ltq_vrx200_mdio_init(dev))
++ dev->ethtool_ops = <q_vrx200_ethtool_ops;
++ else
++ pr_warn("vrx200: mdio probe failed\n");;
++ return 0;
++
++err_hw:
++ ltq_vrx200_hw_exit(dev);
++ return err;
++}
++
++static void
++ltq_vrx200_tx_timeout(struct net_device *dev)
++{
++ int err;
++
++ ltq_vrx200_hw_exit(dev);
++ err = ltq_vrx200_hw_init(dev);
++ if (err)
++ goto err_hw;
++ dev->trans_start = jiffies;
++ netif_wake_queue(dev);
++ return;
++
++err_hw:
++ ltq_vrx200_hw_exit(dev);
++ netdev_err(dev, "failed to restart vrx200 after TX timeout\n");
++}
++
++static const struct net_device_ops ltq_eth_netdev_ops = {
++ .ndo_open = ltq_vrx200_open,
++ .ndo_stop = ltq_vrx200_stop,
++ .ndo_start_xmit = ltq_vrx200_tx,
++ .ndo_change_mtu = eth_change_mtu,
++ .ndo_do_ioctl = ltq_vrx200_ioctl,
++ .ndo_set_mac_address = eth_mac_addr,
++ .ndo_validate_addr = eth_validate_addr,
++ .ndo_select_queue = ltq_vrx200_select_queue,
++ .ndo_init = ltq_vrx200_init,
++ .ndo_tx_timeout = ltq_vrx200_tx_timeout,
++};
++
++static int __devinit
++ltq_vrx200_probe(struct platform_device *pdev)
++{
++ struct net_device *dev;
++ struct ltq_vrx200_priv *priv;
++ struct resource *res;
++ int err;
++ int i;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res) {
++ dev_err(&pdev->dev, "failed to get vrx200 resource\n");
++ err = -ENOENT;
++ goto err_out;
++ }
++
++ res = devm_request_mem_region(&pdev->dev, res->start,
++ resource_size(res), dev_name(&pdev->dev));
++ if (!res) {
++ dev_err(&pdev->dev, "failed to request vrx200 resource\n");
++ err = -EBUSY;
++ goto err_out;
++ }
++
++ ltq_vrx200_membase = devm_ioremap_nocache(&pdev->dev,
++ res->start, resource_size(res));
++ if (!ltq_vrx200_membase) {
++ dev_err(&pdev->dev, "failed to remap vrx200 engine %d\n",
++ pdev->id);
++ err = -ENOMEM;
++ goto err_out;
++ }
++
++ if (ltq_gpio_request(&pdev->dev, 42, 2, 1, "MDIO") ||
++ ltq_gpio_request(&pdev->dev, 43, 2, 1, "MDC")) {
++ dev_err(&pdev->dev, "failed to request MDIO gpios\n");
++ err = -EBUSY;
++ goto err_out;
++ }
++
++ dev = alloc_etherdev_mq(sizeof(struct ltq_vrx200_priv), 4);
++ strcpy(dev->name, "eth%d");
++ dev->netdev_ops = <q_eth_netdev_ops;
++ priv = netdev_priv(dev);
++ priv->res = res;
++ priv->pldata = dev_get_platdata(&pdev->dev);
++ priv->netdev = dev;
++
++ priv->clk_ppe = clk_get(&pdev->dev, NULL);
++ if (IS_ERR(priv->clk_ppe))
++ return PTR_ERR(priv->clk_ppe);
++
++ spin_lock_init(&priv->lock);
++
++ for (i = 0; i < MAX_DMA_CHAN; i++) {
++ if (IS_TX(i))
++ netif_napi_add(dev, &priv->ch[i].napi,
++ ltq_vrx200_poll_tx, 8);
++ else if (IS_RX(i))
++ netif_napi_add(dev, &priv->ch[i].napi,
++ ltq_vrx200_poll_rx, 32);
++ priv->ch[i].netdev = dev;
++ }
++
++ err = register_netdev(dev);
++ if (err)
++ goto err_free;
++
++ platform_set_drvdata(pdev, dev);
++ return 0;
++
++err_free:
++ kfree(dev);
++err_out:
++ return err;
++}
++
++static int __devexit
++ltq_vrx200_remove(struct platform_device *pdev)
++{
++ struct net_device *dev = platform_get_drvdata(pdev);
++
++ if (dev) {
++ netif_tx_stop_all_queues(dev);
++ ltq_vrx200_hw_exit(dev);
++ ltq_vrx200_mdio_cleanup(dev);
++ unregister_netdev(dev);
++ }
++ return 0;
++}
++
++static struct platform_driver ltq_mii_driver = {
++ .probe = ltq_vrx200_probe,
++ .remove = __devexit_p(ltq_vrx200_remove),
++ .driver = {
++ .name = "ltq_vrx200",
++ .owner = THIS_MODULE,
++ },
++};
++
++module_platform_driver(ltq_mii_driver);
++
++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
++MODULE_DESCRIPTION("Lantiq SoC ETOP");
++MODULE_LICENSE("GPL");
+--
+1.7.9.1
+
+++ /dev/null
-From b257baf20b44e97770a2654a07f196fcbcd46e92 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 10 Oct 2011 22:29:13 +0200
-Subject: [PATCH 42/70] SPI: MIPS: lantiq: adds spi xway
-
----
- .../mips/include/asm/mach-lantiq/lantiq_platform.h | 9 +
- .../mips/include/asm/mach-lantiq/xway/lantiq_irq.h | 2 +
- drivers/spi/Kconfig | 8 +
- drivers/spi/Makefile | 1 +
- drivers/spi/spi-xway.c | 1068 ++++++++++++++++++++
- 5 files changed, 1088 insertions(+), 0 deletions(-)
- create mode 100644 drivers/spi/spi-xway.c
-
---- a/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
-+++ b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h
-@@ -50,4 +50,13 @@ struct ltq_eth_data {
- int mii_mode;
- };
-
-+
-+struct ltq_spi_platform_data {
-+ u16 num_chipselect;
-+};
-+
-+struct ltq_spi_controller_data {
-+ unsigned gpio;
-+};
-+
- #endif
---- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
-+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
-@@ -27,6 +27,8 @@
-
- #define LTQ_SSC_TIR (INT_NUM_IM0_IRL0 + 15)
- #define LTQ_SSC_RIR (INT_NUM_IM0_IRL0 + 14)
-+#define LTQ_SSC_TIR_AR9 (INT_NUM_IM0_IRL0 + 14)
-+#define LTQ_SSC_RIR_AR9 (INT_NUM_IM0_IRL0 + 15)
- #define LTQ_SSC_EIR (INT_NUM_IM0_IRL0 + 16)
-
- #define LTQ_MEI_DYING_GASP_INT (INT_NUM_IM1_IRL0 + 21)
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -393,6 +393,14 @@ config SPI_NUC900
- help
- SPI driver for Nuvoton NUC900 series ARM SoCs
-
-+config SPI_XWAY
-+ tristate "Lantiq XWAY SPI controller"
-+ depends on LANTIQ && SOC_TYPE_XWAY
-+ select SPI_BITBANG
-+ help
-+ This driver supports the Lantiq SoC SPI controller in master
-+ mode.
-+
- #
- # Add new SPI master controllers in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -60,4 +60,5 @@ obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x
- obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
- obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
- obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
-+obj-$(CONFIG_SPI_XWAY) += spi-xway.o
-
---- /dev/null
-+++ b/drivers/spi/spi-xway.c
-@@ -0,0 +1,1068 @@
-+/*
-+ * Lantiq SoC SPI controller
-+ *
-+ * Copyright (C) 2011 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/workqueue.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/sched.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/completion.h>
-+#include <linux/spinlock.h>
-+#include <linux/err.h>
-+#include <linux/clk.h>
-+#include <linux/gpio.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/spi_bitbang.h>
-+
-+#include <lantiq_soc.h>
-+#include <lantiq_platform.h>
-+
-+#define LTQ_SPI_CLC 0x00 /* Clock control */
-+#define LTQ_SPI_PISEL 0x04 /* Port input select */
-+#define LTQ_SPI_ID 0x08 /* Identification */
-+#define LTQ_SPI_CON 0x10 /* Control */
-+#define LTQ_SPI_STAT 0x14 /* Status */
-+#define LTQ_SPI_WHBSTATE 0x18 /* Write HW modified state */
-+#define LTQ_SPI_TB 0x20 /* Transmit buffer */
-+#define LTQ_SPI_RB 0x24 /* Receive buffer */
-+#define LTQ_SPI_RXFCON 0x30 /* Receive FIFO control */
-+#define LTQ_SPI_TXFCON 0x34 /* Transmit FIFO control */
-+#define LTQ_SPI_FSTAT 0x38 /* FIFO status */
-+#define LTQ_SPI_BRT 0x40 /* Baudrate timer */
-+#define LTQ_SPI_BRSTAT 0x44 /* Baudrate timer status */
-+#define LTQ_SPI_SFCON 0x60 /* Serial frame control */
-+#define LTQ_SPI_SFSTAT 0x64 /* Serial frame status */
-+#define LTQ_SPI_GPOCON 0x70 /* General purpose output control */
-+#define LTQ_SPI_GPOSTAT 0x74 /* General purpose output status */
-+#define LTQ_SPI_FGPO 0x78 /* Forced general purpose output */
-+#define LTQ_SPI_RXREQ 0x80 /* Receive request */
-+#define LTQ_SPI_RXCNT 0x84 /* Receive count */
-+#define LTQ_SPI_DMACON 0xEC /* DMA control */
-+#define LTQ_SPI_IRNEN 0xF4 /* Interrupt node enable */
-+#define LTQ_SPI_IRNICR 0xF8 /* Interrupt node interrupt capture */
-+#define LTQ_SPI_IRNCR 0xFC /* Interrupt node control */
-+
-+#define LTQ_SPI_CLC_SMC_SHIFT 16 /* Clock divider for sleep mode */
-+#define LTQ_SPI_CLC_SMC_MASK 0xFF
-+#define LTQ_SPI_CLC_RMC_SHIFT 8 /* Clock divider for normal run mode */
-+#define LTQ_SPI_CLC_RMC_MASK 0xFF
-+#define LTQ_SPI_CLC_DISS BIT(1) /* Disable status bit */
-+#define LTQ_SPI_CLC_DISR BIT(0) /* Disable request bit */
-+
-+#define LTQ_SPI_ID_TXFS_SHIFT 24 /* Implemented TX FIFO size */
-+#define LTQ_SPI_ID_TXFS_MASK 0x3F
-+#define LTQ_SPI_ID_RXFS_SHIFT 16 /* Implemented RX FIFO size */
-+#define LTQ_SPI_ID_RXFS_MASK 0x3F
-+#define LTQ_SPI_ID_REV_MASK 0x1F /* Hardware revision number */
-+#define LTQ_SPI_ID_CFG BIT(5) /* DMA interface support */
-+
-+#define LTQ_SPI_CON_BM_SHIFT 16 /* Data width selection */
-+#define LTQ_SPI_CON_BM_MASK 0x1F
-+#define LTQ_SPI_CON_EM BIT(24) /* Echo mode */
-+#define LTQ_SPI_CON_IDLE BIT(23) /* Idle bit value */
-+#define LTQ_SPI_CON_ENBV BIT(22) /* Enable byte valid control */
-+#define LTQ_SPI_CON_RUEN BIT(12) /* Receive underflow error enable */
-+#define LTQ_SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */
-+#define LTQ_SPI_CON_AEN BIT(10) /* Abort error enable */
-+#define LTQ_SPI_CON_REN BIT(9) /* Receive overflow error enable */
-+#define LTQ_SPI_CON_TEN BIT(8) /* Transmit overflow error enable */
-+#define LTQ_SPI_CON_LB BIT(7) /* Loopback control */
-+#define LTQ_SPI_CON_PO BIT(6) /* Clock polarity control */
-+#define LTQ_SPI_CON_PH BIT(5) /* Clock phase control */
-+#define LTQ_SPI_CON_HB BIT(4) /* Heading control */
-+#define LTQ_SPI_CON_RXOFF BIT(1) /* Switch receiver off */
-+#define LTQ_SPI_CON_TXOFF BIT(0) /* Switch transmitter off */
-+
-+#define LTQ_SPI_STAT_RXBV_MASK 0x7
-+#define LTQ_SPI_STAT_RXBV_SHIFT 28
-+#define LTQ_SPI_STAT_BSY BIT(13) /* Busy flag */
-+#define LTQ_SPI_STAT_RUE BIT(12) /* Receive underflow error flag */
-+#define LTQ_SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */
-+#define LTQ_SPI_STAT_AE BIT(10) /* Abort error flag */
-+#define LTQ_SPI_STAT_RE BIT(9) /* Receive error flag */
-+#define LTQ_SPI_STAT_TE BIT(8) /* Transmit error flag */
-+#define LTQ_SPI_STAT_MS BIT(1) /* Master/slave select bit */
-+#define LTQ_SPI_STAT_EN BIT(0) /* Enable bit */
-+
-+#define LTQ_SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */
-+#define LTQ_SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */
-+#define LTQ_SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */
-+#define LTQ_SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */
-+#define LTQ_SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */
-+#define LTQ_SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */
-+#define LTQ_SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */
-+#define LTQ_SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */
-+#define LTQ_SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */
-+#define LTQ_SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */
-+#define LTQ_SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */
-+#define LTQ_SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */
-+#define LTQ_SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */
-+#define LTQ_SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */
-+#define LTQ_SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */
-+#define LTQ_SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */
-+#define LTQ_SPI_WHBSTATE_CLR_ERRORS 0x0F50
-+
-+#define LTQ_SPI_RXFCON_RXFITL_SHIFT 8 /* FIFO interrupt trigger level */
-+#define LTQ_SPI_RXFCON_RXFITL_MASK 0x3F
-+#define LTQ_SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */
-+#define LTQ_SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */
-+
-+#define LTQ_SPI_TXFCON_TXFITL_SHIFT 8 /* FIFO interrupt trigger level */
-+#define LTQ_SPI_TXFCON_TXFITL_MASK 0x3F
-+#define LTQ_SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */
-+#define LTQ_SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */
-+
-+#define LTQ_SPI_FSTAT_RXFFL_MASK 0x3f
-+#define LTQ_SPI_FSTAT_RXFFL_SHIFT 0
-+#define LTQ_SPI_FSTAT_TXFFL_MASK 0x3f
-+#define LTQ_SPI_FSTAT_TXFFL_SHIFT 8
-+
-+#define LTQ_SPI_GPOCON_ISCSBN_SHIFT 8
-+#define LTQ_SPI_GPOCON_INVOUTN_SHIFT 0
-+
-+#define LTQ_SPI_FGPO_SETOUTN_SHIFT 8
-+#define LTQ_SPI_FGPO_CLROUTN_SHIFT 0
-+
-+#define LTQ_SPI_RXREQ_RXCNT_MASK 0xFFFF /* Receive count value */
-+#define LTQ_SPI_RXCNT_TODO_MASK 0xFFFF /* Recevie to-do value */
-+
-+#define LTQ_SPI_IRNEN_F BIT(3) /* Frame end interrupt request */
-+#define LTQ_SPI_IRNEN_E BIT(2) /* Error end interrupt request */
-+#define LTQ_SPI_IRNEN_T BIT(1) /* Transmit end interrupt request */
-+#define LTQ_SPI_IRNEN_R BIT(0) /* Receive end interrupt request */
-+#define LTQ_SPI_IRNEN_ALL 0xF
-+
-+/* Hard-wired GPIOs used by SPI controller */
-+#define LTQ_SPI_GPIO_DI 16
-+#define LTQ_SPI_GPIO_DO 17
-+#define LTQ_SPI_GPIO_CLK 18
-+
-+struct ltq_spi {
-+ struct spi_bitbang bitbang;
-+ struct completion done;
-+ spinlock_t lock;
-+
-+ struct device *dev;
-+ void __iomem *base;
-+ struct clk *fpiclk;
-+ struct clk *spiclk;
-+
-+ int status;
-+ int irq[3];
-+
-+ const u8 *tx;
-+ u8 *rx;
-+ u32 tx_cnt;
-+ u32 rx_cnt;
-+ u32 len;
-+ struct spi_transfer *curr_transfer;
-+
-+ u32 (*get_tx) (struct ltq_spi *);
-+
-+ u16 txfs;
-+ u16 rxfs;
-+ unsigned dma_support:1;
-+ unsigned cfg_mode:1;
-+
-+};
-+
-+struct ltq_spi_controller_state {
-+ void (*cs_activate) (struct spi_device *);
-+ void (*cs_deactivate) (struct spi_device *);
-+};
-+
-+struct ltq_spi_irq_map {
-+ char *name;
-+ irq_handler_t handler;
-+};
-+
-+struct ltq_spi_cs_gpio_map {
-+ unsigned gpio;
-+ unsigned mux;
-+};
-+
-+static inline struct ltq_spi *ltq_spi_to_hw(struct spi_device *spi)
-+{
-+ return spi_master_get_devdata(spi->master);
-+}
-+
-+static inline u32 ltq_spi_reg_read(struct ltq_spi *hw, u32 reg)
-+{
-+ return ioread32be(hw->base + reg);
-+}
-+
-+static inline void ltq_spi_reg_write(struct ltq_spi *hw, u32 val, u32 reg)
-+{
-+ iowrite32be(val, hw->base + reg);
-+}
-+
-+static inline void ltq_spi_reg_setbit(struct ltq_spi *hw, u32 bits, u32 reg)
-+{
-+ u32 val;
-+
-+ val = ltq_spi_reg_read(hw, reg);
-+ val |= bits;
-+ ltq_spi_reg_write(hw, val, reg);
-+}
-+
-+static inline void ltq_spi_reg_clearbit(struct ltq_spi *hw, u32 bits, u32 reg)
-+{
-+ u32 val;
-+
-+ val = ltq_spi_reg_read(hw, reg);
-+ val &= ~bits;
-+ ltq_spi_reg_write(hw, val, reg);
-+}
-+
-+static void ltq_spi_hw_enable(struct ltq_spi *hw)
-+{
-+ u32 clc;
-+
-+ /* Power-up mdule */
-+ clk_enable(hw->spiclk);
-+
-+ /*
-+ * Set clock divider for run mode to 1 to
-+ * run at same frequency as FPI bus
-+ */
-+ clc = (1 << LTQ_SPI_CLC_RMC_SHIFT);
-+ ltq_spi_reg_write(hw, clc, LTQ_SPI_CLC);
-+}
-+
-+static void ltq_spi_hw_disable(struct ltq_spi *hw)
-+{
-+ /* Set clock divider to 0 and set module disable bit */
-+ ltq_spi_reg_write(hw, LTQ_SPI_CLC_DISS, LTQ_SPI_CLC);
-+
-+ /* Power-down mdule */
-+ clk_disable(hw->spiclk);
-+}
-+
-+static void ltq_spi_reset_fifos(struct ltq_spi *hw)
-+{
-+ u32 val;
-+
-+ /*
-+ * Enable and flush FIFOs. Set interrupt trigger level to
-+ * half of FIFO count implemented in hardware.
-+ */
-+ if (hw->txfs > 1) {
-+ val = hw->txfs << (LTQ_SPI_TXFCON_TXFITL_SHIFT - 1);
-+ val |= LTQ_SPI_TXFCON_TXFEN | LTQ_SPI_TXFCON_TXFLU;
-+ ltq_spi_reg_write(hw, val, LTQ_SPI_TXFCON);
-+ }
-+
-+ if (hw->rxfs > 1) {
-+ val = hw->rxfs << (LTQ_SPI_RXFCON_RXFITL_SHIFT - 1);
-+ val |= LTQ_SPI_RXFCON_RXFEN | LTQ_SPI_RXFCON_RXFLU;
-+ ltq_spi_reg_write(hw, val, LTQ_SPI_RXFCON);
-+ }
-+}
-+
-+static inline int ltq_spi_wait_ready(struct ltq_spi *hw)
-+{
-+ u32 stat;
-+ unsigned long timeout;
-+
-+ timeout = jiffies + msecs_to_jiffies(200);
-+
-+ do {
-+ stat = ltq_spi_reg_read(hw, LTQ_SPI_STAT);
-+ if (!(stat & LTQ_SPI_STAT_BSY))
-+ return 0;
-+
-+ cond_resched();
-+ } while (!time_after_eq(jiffies, timeout));
-+
-+ dev_err(hw->dev, "SPI wait ready timed out\n");
-+
-+ return -ETIMEDOUT;
-+}
-+
-+static void ltq_spi_config_mode_set(struct ltq_spi *hw)
-+{
-+ if (hw->cfg_mode)
-+ return;
-+
-+ /*
-+ * Putting the SPI module in config mode is only safe if no
-+ * transfer is in progress as indicated by busy flag STATE.BSY.
-+ */
-+ if (ltq_spi_wait_ready(hw)) {
-+ ltq_spi_reset_fifos(hw);
-+ hw->status = -ETIMEDOUT;
-+ }
-+ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLREN, LTQ_SPI_WHBSTATE);
-+
-+ hw->cfg_mode = 1;
-+}
-+
-+static void ltq_spi_run_mode_set(struct ltq_spi *hw)
-+{
-+ if (!hw->cfg_mode)
-+ return;
-+
-+ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETEN, LTQ_SPI_WHBSTATE);
-+
-+ hw->cfg_mode = 0;
-+}
-+
-+static u32 ltq_spi_tx_word_u8(struct ltq_spi *hw)
-+{
-+ const u8 *tx = hw->tx;
-+ u32 data = *tx++;
-+
-+ hw->tx_cnt++;
-+ hw->tx++;
-+
-+ return data;
-+}
-+
-+static u32 ltq_spi_tx_word_u16(struct ltq_spi *hw)
-+{
-+ const u16 *tx = (u16 *) hw->tx;
-+ u32 data = *tx++;
-+
-+ hw->tx_cnt += 2;
-+ hw->tx += 2;
-+
-+ return data;
-+}
-+
-+static u32 ltq_spi_tx_word_u32(struct ltq_spi *hw)
-+{
-+ const u32 *tx = (u32 *) hw->tx;
-+ u32 data = *tx++;
-+
-+ hw->tx_cnt += 4;
-+ hw->tx += 4;
-+
-+ return data;
-+}
-+
-+static void ltq_spi_bits_per_word_set(struct spi_device *spi)
-+{
-+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+ u32 bm;
-+ u8 bits_per_word = spi->bits_per_word;
-+
-+ /*
-+ * Use either default value of SPI device or value
-+ * from current transfer.
-+ */
-+ if (hw->curr_transfer && hw->curr_transfer->bits_per_word)
-+ bits_per_word = hw->curr_transfer->bits_per_word;
-+
-+ if (bits_per_word <= 8)
-+ hw->get_tx = ltq_spi_tx_word_u8;
-+ else if (bits_per_word <= 16)
-+ hw->get_tx = ltq_spi_tx_word_u16;
-+ else if (bits_per_word <= 32)
-+ hw->get_tx = ltq_spi_tx_word_u32;
-+
-+ /* CON.BM value = bits_per_word - 1 */
-+ bm = (bits_per_word - 1) << LTQ_SPI_CON_BM_SHIFT;
-+
-+ ltq_spi_reg_clearbit(hw, LTQ_SPI_CON_BM_MASK <<
-+ LTQ_SPI_CON_BM_SHIFT, LTQ_SPI_CON);
-+ ltq_spi_reg_setbit(hw, bm, LTQ_SPI_CON);
-+}
-+
-+static void ltq_spi_speed_set(struct spi_device *spi)
-+{
-+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+ u32 br, max_speed_hz, spi_clk;
-+ u32 speed_hz = spi->max_speed_hz;
-+
-+ /*
-+ * Use either default value of SPI device or value
-+ * from current transfer.
-+ */
-+ if (hw->curr_transfer && hw->curr_transfer->speed_hz)
-+ speed_hz = hw->curr_transfer->speed_hz;
-+
-+ /*
-+ * SPI module clock is derived from FPI bus clock dependent on
-+ * divider value in CLC.RMS which is always set to 1.
-+ */
-+ spi_clk = clk_get_rate(hw->fpiclk);
-+
-+ /*
-+ * Maximum SPI clock frequency in master mode is half of
-+ * SPI module clock frequency. Maximum reload value of
-+ * baudrate generator BR is 2^16.
-+ */
-+ max_speed_hz = spi_clk / 2;
-+ if (speed_hz >= max_speed_hz)
-+ br = 0;
-+ else
-+ br = (max_speed_hz / speed_hz) - 1;
-+
-+ if (br > 0xFFFF)
-+ br = 0xFFFF;
-+
-+ ltq_spi_reg_write(hw, br, LTQ_SPI_BRT);
-+}
-+
-+static void ltq_spi_clockmode_set(struct spi_device *spi)
-+{
-+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+ u32 con;
-+
-+ con = ltq_spi_reg_read(hw, LTQ_SPI_CON);
-+
-+ /*
-+ * SPI mode mapping in CON register:
-+ * Mode CPOL CPHA CON.PO CON.PH
-+ * 0 0 0 0 1
-+ * 1 0 1 0 0
-+ * 2 1 0 1 1
-+ * 3 1 1 1 0
-+ */
-+ if (spi->mode & SPI_CPHA)
-+ con &= ~LTQ_SPI_CON_PH;
-+ else
-+ con |= LTQ_SPI_CON_PH;
-+
-+ if (spi->mode & SPI_CPOL)
-+ con |= LTQ_SPI_CON_PO;
-+ else
-+ con &= ~LTQ_SPI_CON_PO;
-+
-+ /* Set heading control */
-+ if (spi->mode & SPI_LSB_FIRST)
-+ con &= ~LTQ_SPI_CON_HB;
-+ else
-+ con |= LTQ_SPI_CON_HB;
-+
-+ ltq_spi_reg_write(hw, con, LTQ_SPI_CON);
-+}
-+
-+static void ltq_spi_xmit_set(struct ltq_spi *hw, struct spi_transfer *t)
-+{
-+ u32 con;
-+
-+ con = ltq_spi_reg_read(hw, LTQ_SPI_CON);
-+
-+ if (t) {
-+ if (t->tx_buf && t->rx_buf) {
-+ con &= ~(LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF);
-+ } else if (t->rx_buf) {
-+ con &= ~LTQ_SPI_CON_RXOFF;
-+ con |= LTQ_SPI_CON_TXOFF;
-+ } else if (t->tx_buf) {
-+ con &= ~LTQ_SPI_CON_TXOFF;
-+ con |= LTQ_SPI_CON_RXOFF;
-+ }
-+ } else
-+ con |= (LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF);
-+
-+ ltq_spi_reg_write(hw, con, LTQ_SPI_CON);
-+}
-+
-+static void ltq_spi_gpio_cs_activate(struct spi_device *spi)
-+{
-+ struct ltq_spi_controller_data *cdata = spi->controller_data;
-+ int val = spi->mode & SPI_CS_HIGH ? 1 : 0;
-+
-+ gpio_set_value(cdata->gpio, val);
-+}
-+
-+static void ltq_spi_gpio_cs_deactivate(struct spi_device *spi)
-+{
-+ struct ltq_spi_controller_data *cdata = spi->controller_data;
-+ int val = spi->mode & SPI_CS_HIGH ? 0 : 1;
-+
-+ gpio_set_value(cdata->gpio, val);
-+}
-+
-+static void ltq_spi_internal_cs_activate(struct spi_device *spi)
-+{
-+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+ u32 fgpo;
-+
-+ fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_CLROUTN_SHIFT));
-+ ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
-+}
-+
-+static void ltq_spi_internal_cs_deactivate(struct spi_device *spi)
-+{
-+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+ u32 fgpo;
-+
-+ fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT));
-+ ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
-+}
-+
-+static void ltq_spi_chipselect(struct spi_device *spi, int cs)
-+{
-+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+ struct ltq_spi_controller_state *cstate = spi->controller_state;
-+
-+ switch (cs) {
-+ case BITBANG_CS_ACTIVE:
-+ ltq_spi_bits_per_word_set(spi);
-+ ltq_spi_speed_set(spi);
-+ ltq_spi_clockmode_set(spi);
-+ ltq_spi_run_mode_set(hw);
-+
-+ cstate->cs_activate(spi);
-+ break;
-+
-+ case BITBANG_CS_INACTIVE:
-+ cstate->cs_deactivate(spi);
-+
-+ ltq_spi_config_mode_set(hw);
-+
-+ break;
-+ }
-+}
-+
-+static int ltq_spi_setup_transfer(struct spi_device *spi,
-+ struct spi_transfer *t)
-+{
-+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+ u8 bits_per_word = spi->bits_per_word;
-+
-+ hw->curr_transfer = t;
-+
-+ if (t && t->bits_per_word)
-+ bits_per_word = t->bits_per_word;
-+
-+ if (bits_per_word > 32)
-+ return -EINVAL;
-+
-+ ltq_spi_config_mode_set(hw);
-+
-+ return 0;
-+}
-+
-+static const struct ltq_spi_cs_gpio_map ltq_spi_cs[] = {
-+ { 15, 2 },
-+ { 22, 2 },
-+ { 13, 1 },
-+ { 10, 1 },
-+ { 9, 1 },
-+ { 11, 3 },
-+};
-+
-+static int ltq_spi_setup(struct spi_device *spi)
-+{
-+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+ struct ltq_spi_controller_data *cdata = spi->controller_data;
-+ struct ltq_spi_controller_state *cstate;
-+ u32 gpocon, fgpo;
-+ int ret;
-+
-+ /* Set default word length to 8 if not set */
-+ if (!spi->bits_per_word)
-+ spi->bits_per_word = 8;
-+
-+ if (spi->bits_per_word > 32)
-+ return -EINVAL;
-+
-+ if (!spi->controller_state) {
-+ cstate = kzalloc(sizeof(struct ltq_spi_controller_state),
-+ GFP_KERNEL);
-+ if (!cstate)
-+ return -ENOMEM;
-+
-+ spi->controller_state = cstate;
-+ } else
-+ return 0;
-+
-+ /*
-+ * Up to six GPIOs can be connected to the SPI module
-+ * via GPIO alternate function to control the chip select lines.
-+ * For more flexibility in board layout this driver can also control
-+ * the CS lines via GPIO API. If GPIOs should be used, board setup code
-+ * have to register the SPI device with struct ltq_spi_controller_data
-+ * attached.
-+ */
-+ if (cdata && cdata->gpio) {
-+ ret = gpio_request(cdata->gpio, "spi-cs");
-+ if (ret)
-+ return -EBUSY;
-+
-+ ret = spi->mode & SPI_CS_HIGH ? 0 : 1;
-+ gpio_direction_output(cdata->gpio, ret);
-+
-+ cstate->cs_activate = ltq_spi_gpio_cs_activate;
-+ cstate->cs_deactivate = ltq_spi_gpio_cs_deactivate;
-+ } else {
-+ ret = ltq_gpio_request(&spi->dev, ltq_spi_cs[spi->chip_select].gpio,
-+ ltq_spi_cs[spi->chip_select].mux,
-+ 1, "spi-cs");
-+ if (ret)
-+ return -EBUSY;
-+
-+ gpocon = (1 << (spi->chip_select +
-+ LTQ_SPI_GPOCON_ISCSBN_SHIFT));
-+
-+ if (spi->mode & SPI_CS_HIGH)
-+ gpocon |= (1 << spi->chip_select);
-+
-+ fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT));
-+
-+ ltq_spi_reg_setbit(hw, gpocon, LTQ_SPI_GPOCON);
-+ ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
-+
-+ cstate->cs_activate = ltq_spi_internal_cs_activate;
-+ cstate->cs_deactivate = ltq_spi_internal_cs_deactivate;
-+ }
-+
-+ return 0;
-+}
-+
-+static void ltq_spi_cleanup(struct spi_device *spi)
-+{
-+ struct ltq_spi_controller_data *cdata = spi->controller_data;
-+ struct ltq_spi_controller_state *cstate = spi->controller_state;
-+ unsigned gpio;
-+
-+ if (cdata && cdata->gpio)
-+ gpio = cdata->gpio;
-+ else
-+ gpio = ltq_spi_cs[spi->chip_select].gpio;
-+
-+ gpio_free(gpio);
-+ kfree(cstate);
-+}
-+
-+static void ltq_spi_txfifo_write(struct ltq_spi *hw)
-+{
-+ u32 fstat, data;
-+ u16 fifo_space;
-+
-+ /* Determine how much FIFOs are free for TX data */
-+ fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT);
-+ fifo_space = hw->txfs - ((fstat >> LTQ_SPI_FSTAT_TXFFL_SHIFT) &
-+ LTQ_SPI_FSTAT_TXFFL_MASK);
-+
-+ if (!fifo_space)
-+ return;
-+
-+ while (hw->tx_cnt < hw->len && fifo_space) {
-+ data = hw->get_tx(hw);
-+ ltq_spi_reg_write(hw, data, LTQ_SPI_TB);
-+ fifo_space--;
-+ }
-+}
-+
-+static void ltq_spi_rxfifo_read(struct ltq_spi *hw)
-+{
-+ u32 fstat, data, *rx32;
-+ u16 fifo_fill;
-+ u8 rxbv, shift, *rx8;
-+
-+ /* Determine how much FIFOs are filled with RX data */
-+ fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT);
-+ fifo_fill = ((fstat >> LTQ_SPI_FSTAT_RXFFL_SHIFT)
-+ & LTQ_SPI_FSTAT_RXFFL_MASK);
-+
-+ if (!fifo_fill)
-+ return;
-+
-+ /*
-+ * The 32 bit FIFO is always used completely independent from the
-+ * bits_per_word value. Thus four bytes have to be read at once
-+ * per FIFO.
-+ */
-+ rx32 = (u32 *) hw->rx;
-+ while (hw->len - hw->rx_cnt >= 4 && fifo_fill) {
-+ *rx32++ = ltq_spi_reg_read(hw, LTQ_SPI_RB);
-+ hw->rx_cnt += 4;
-+ hw->rx += 4;
-+ fifo_fill--;
-+ }
-+
-+ /*
-+ * If there are remaining bytes, read byte count from STAT.RXBV
-+ * register and read the data byte-wise.
-+ */
-+ while (fifo_fill && hw->rx_cnt < hw->len) {
-+ rxbv = (ltq_spi_reg_read(hw, LTQ_SPI_STAT) >>
-+ LTQ_SPI_STAT_RXBV_SHIFT) & LTQ_SPI_STAT_RXBV_MASK;
-+ data = ltq_spi_reg_read(hw, LTQ_SPI_RB);
-+
-+ shift = (rxbv - 1) * 8;
-+ rx8 = hw->rx;
-+
-+ while (rxbv) {
-+ *rx8++ = (data >> shift) & 0xFF;
-+ rxbv--;
-+ shift -= 8;
-+ hw->rx_cnt++;
-+ hw->rx++;
-+ }
-+
-+ fifo_fill--;
-+ }
-+}
-+
-+static void ltq_spi_rxreq_set(struct ltq_spi *hw)
-+{
-+ u32 rxreq, rxreq_max, rxtodo;
-+
-+ rxtodo = ltq_spi_reg_read(hw, LTQ_SPI_RXCNT) & LTQ_SPI_RXCNT_TODO_MASK;
-+
-+ /*
-+ * In RX-only mode the serial clock is activated only after writing
-+ * the expected amount of RX bytes into RXREQ register.
-+ * To avoid receive overflows at high clocks it is better to request
-+ * only the amount of bytes that fits into all FIFOs. This value
-+ * depends on the FIFO size implemented in hardware.
-+ */
-+ rxreq = hw->len - hw->rx_cnt;
-+ rxreq_max = hw->rxfs << 2;
-+ rxreq = min(rxreq_max, rxreq);
-+
-+ if (!rxtodo && rxreq)
-+ ltq_spi_reg_write(hw, rxreq, LTQ_SPI_RXREQ);
-+}
-+
-+static inline void ltq_spi_complete(struct ltq_spi *hw)
-+{
-+ complete(&hw->done);
-+}
-+
-+irqreturn_t ltq_spi_tx_irq(int irq, void *data)
-+{
-+ struct ltq_spi *hw = data;
-+ unsigned long flags;
-+ int completed = 0;
-+
-+ spin_lock_irqsave(&hw->lock, flags);
-+
-+ if (hw->tx_cnt < hw->len)
-+ ltq_spi_txfifo_write(hw);
-+
-+ if (hw->tx_cnt == hw->len)
-+ completed = 1;
-+
-+ spin_unlock_irqrestore(&hw->lock, flags);
-+
-+ if (completed)
-+ ltq_spi_complete(hw);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+irqreturn_t ltq_spi_rx_irq(int irq, void *data)
-+{
-+ struct ltq_spi *hw = data;
-+ unsigned long flags;
-+ int completed = 0;
-+
-+ spin_lock_irqsave(&hw->lock, flags);
-+
-+ if (hw->rx_cnt < hw->len) {
-+ ltq_spi_rxfifo_read(hw);
-+
-+ if (hw->tx && hw->tx_cnt < hw->len)
-+ ltq_spi_txfifo_write(hw);
-+ }
-+
-+ if (hw->rx_cnt == hw->len)
-+ completed = 1;
-+ else if (!hw->tx)
-+ ltq_spi_rxreq_set(hw);
-+
-+ spin_unlock_irqrestore(&hw->lock, flags);
-+
-+ if (completed)
-+ ltq_spi_complete(hw);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+irqreturn_t ltq_spi_err_irq(int irq, void *data)
-+{
-+ struct ltq_spi *hw = data;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&hw->lock, flags);
-+
-+ /* Disable all interrupts */
-+ ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN);
-+
-+ /* Clear all error flags */
-+ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
-+
-+ /* Flush FIFOs */
-+ ltq_spi_reg_setbit(hw, LTQ_SPI_RXFCON_RXFLU, LTQ_SPI_RXFCON);
-+ ltq_spi_reg_setbit(hw, LTQ_SPI_TXFCON_TXFLU, LTQ_SPI_TXFCON);
-+
-+ hw->status = -EIO;
-+ spin_unlock_irqrestore(&hw->lock, flags);
-+
-+ ltq_spi_complete(hw);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int ltq_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
-+{
-+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
-+ u32 irq_flags = 0;
-+
-+ hw->tx = t->tx_buf;
-+ hw->rx = t->rx_buf;
-+ hw->len = t->len;
-+ hw->tx_cnt = 0;
-+ hw->rx_cnt = 0;
-+ hw->status = 0;
-+ INIT_COMPLETION(hw->done);
-+
-+ ltq_spi_xmit_set(hw, t);
-+
-+ /* Enable error interrupts */
-+ ltq_spi_reg_setbit(hw, LTQ_SPI_IRNEN_E, LTQ_SPI_IRNEN);
-+
-+ if (hw->tx) {
-+ /* Initially fill TX FIFO with as much data as possible */
-+ ltq_spi_txfifo_write(hw);
-+ irq_flags |= LTQ_SPI_IRNEN_T;
-+
-+ /* Always enable RX interrupt in Full Duplex mode */
-+ if (hw->rx)
-+ irq_flags |= LTQ_SPI_IRNEN_R;
-+ } else if (hw->rx) {
-+ /* Start RX clock */
-+ ltq_spi_rxreq_set(hw);
-+
-+ /* Enable RX interrupt to receive data from RX FIFOs */
-+ irq_flags |= LTQ_SPI_IRNEN_R;
-+ }
-+
-+ /* Enable TX or RX interrupts */
-+ ltq_spi_reg_setbit(hw, irq_flags, LTQ_SPI_IRNEN);
-+ wait_for_completion_interruptible(&hw->done);
-+
-+ /* Disable all interrupts */
-+ ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN);
-+
-+ /*
-+ * Return length of current transfer for bitbang utility code if
-+ * no errors occured during transmission.
-+ */
-+ if (!hw->status)
-+ hw->status = hw->len;
-+
-+ return hw->status;
-+}
-+
-+static const struct ltq_spi_irq_map ltq_spi_irqs[] = {
-+ { "spi_tx", ltq_spi_tx_irq },
-+ { "spi_rx", ltq_spi_rx_irq },
-+ { "spi_err", ltq_spi_err_irq },
-+};
-+
-+static int __init ltq_spi_probe(struct platform_device *pdev)
-+{
-+ struct spi_master *master;
-+ struct resource *r;
-+ struct ltq_spi *hw;
-+ struct ltq_spi_platform_data *pdata = pdev->dev.platform_data;
-+ int ret, i;
-+ u32 data, id;
-+
-+ master = spi_alloc_master(&pdev->dev, sizeof(struct ltq_spi));
-+ if (!master) {
-+ dev_err(&pdev->dev, "spi_alloc_master\n");
-+ ret = -ENOMEM;
-+ goto err;
-+ }
-+
-+ hw = spi_master_get_devdata(master);
-+
-+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (r == NULL) {
-+ dev_err(&pdev->dev, "platform_get_resource\n");
-+ ret = -ENOENT;
-+ goto err_master;
-+ }
-+
-+ r = devm_request_mem_region(&pdev->dev, r->start, resource_size(r),
-+ pdev->name);
-+ if (!r) {
-+ dev_err(&pdev->dev, "devm_request_mem_region\n");
-+ ret = -ENXIO;
-+ goto err_master;
-+ }
-+
-+ hw->base = devm_ioremap_nocache(&pdev->dev, r->start, resource_size(r));
-+ if (!hw->base) {
-+ dev_err(&pdev->dev, "devm_ioremap_nocache\n");
-+ ret = -ENXIO;
-+ goto err_master;
-+ }
-+
-+ hw->fpiclk = clk_get_fpi();
-+ if (IS_ERR(hw->fpiclk)) {
-+ dev_err(&pdev->dev, "clk_get\n");
-+ ret = PTR_ERR(hw->fpiclk);
-+ goto err_master;
-+ }
-+
-+ hw->spiclk = clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(hw->spiclk)) {
-+ dev_err(&pdev->dev, "clk_get\n");
-+ ret = PTR_ERR(hw->spiclk);
-+ goto err_master;
-+ }
-+
-+ memset(hw->irq, 0, sizeof(hw->irq));
-+ for (i = 0; i < ARRAY_SIZE(ltq_spi_irqs); i++) {
-+ ret = platform_get_irq_byname(pdev, ltq_spi_irqs[i].name);
-+ if (0 > ret) {
-+ dev_err(&pdev->dev, "platform_get_irq_byname\n");
-+ goto err_irq;
-+ }
-+
-+ hw->irq[i] = ret;
-+ ret = request_irq(hw->irq[i], ltq_spi_irqs[i].handler,
-+ 0, ltq_spi_irqs[i].name, hw);
-+ if (ret) {
-+ dev_err(&pdev->dev, "request_irq\n");
-+ goto err_irq;
-+ }
-+ }
-+
-+ hw->bitbang.master = spi_master_get(master);
-+ hw->bitbang.chipselect = ltq_spi_chipselect;
-+ hw->bitbang.setup_transfer = ltq_spi_setup_transfer;
-+ hw->bitbang.txrx_bufs = ltq_spi_txrx_bufs;
-+
-+ master->bus_num = pdev->id;
-+ master->num_chipselect = pdata->num_chipselect;
-+ master->setup = ltq_spi_setup;
-+ master->cleanup = ltq_spi_cleanup;
-+
-+ hw->dev = &pdev->dev;
-+ init_completion(&hw->done);
-+ spin_lock_init(&hw->lock);
-+
-+ /* Set GPIO alternate functions to SPI */
-+ ltq_gpio_request(&pdev->dev, LTQ_SPI_GPIO_DI, 2, 0, "spi-di");
-+ ltq_gpio_request(&pdev->dev, LTQ_SPI_GPIO_DO, 2, 1, "spi-do");
-+ ltq_gpio_request(&pdev->dev, LTQ_SPI_GPIO_CLK, 2, 1, "spi-clk");
-+
-+ ltq_spi_hw_enable(hw);
-+
-+ /* Read module capabilities */
-+ id = ltq_spi_reg_read(hw, LTQ_SPI_ID);
-+ hw->txfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK;
-+ hw->rxfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK;
-+ hw->dma_support = (id & LTQ_SPI_ID_CFG) ? 1 : 0;
-+
-+ ltq_spi_config_mode_set(hw);
-+
-+ /* Enable error checking, disable TX/RX, set idle value high */
-+ data = LTQ_SPI_CON_RUEN | LTQ_SPI_CON_AEN |
-+ LTQ_SPI_CON_TEN | LTQ_SPI_CON_REN |
-+ LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF | LTQ_SPI_CON_IDLE;
-+ ltq_spi_reg_write(hw, data, LTQ_SPI_CON);
-+
-+ /* Enable master mode and clear error flags */
-+ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETMS |
-+ LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
-+
-+ /* Reset GPIO/CS registers */
-+ ltq_spi_reg_write(hw, 0x0, LTQ_SPI_GPOCON);
-+ ltq_spi_reg_write(hw, 0xFF00, LTQ_SPI_FGPO);
-+
-+ /* Enable and flush FIFOs */
-+ ltq_spi_reset_fifos(hw);
-+
-+ ret = spi_bitbang_start(&hw->bitbang);
-+ if (ret) {
-+ dev_err(&pdev->dev, "spi_bitbang_start\n");
-+ goto err_bitbang;
-+ }
-+
-+ platform_set_drvdata(pdev, hw);
-+
-+ pr_info("Lantiq SoC SPI controller rev %u (TXFS %u, RXFS %u, DMA %u)\n",
-+ id & LTQ_SPI_ID_REV_MASK, hw->txfs, hw->rxfs, hw->dma_support);
-+
-+ return 0;
-+
-+err_bitbang:
-+ ltq_spi_hw_disable(hw);
-+
-+err_irq:
-+ clk_put(hw->fpiclk);
-+
-+ for (; i > 0; i--)
-+ free_irq(hw->irq[i], hw);
-+
-+err_master:
-+ spi_master_put(master);
-+
-+err:
-+ return ret;
-+}
-+
-+static int __exit ltq_spi_remove(struct platform_device *pdev)
-+{
-+ struct ltq_spi *hw = platform_get_drvdata(pdev);
-+ int ret, i;
-+
-+ ret = spi_bitbang_stop(&hw->bitbang);
-+ if (ret)
-+ return ret;
-+
-+ platform_set_drvdata(pdev, NULL);
-+
-+ ltq_spi_config_mode_set(hw);
-+ ltq_spi_hw_disable(hw);
-+
-+ for (i = 0; i < ARRAY_SIZE(hw->irq); i++)
-+ if (0 < hw->irq[i])
-+ free_irq(hw->irq[i], hw);
-+
-+ gpio_free(LTQ_SPI_GPIO_DI);
-+ gpio_free(LTQ_SPI_GPIO_DO);
-+ gpio_free(LTQ_SPI_GPIO_CLK);
-+
-+ clk_put(hw->fpiclk);
-+ spi_master_put(hw->bitbang.master);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver ltq_spi_driver = {
-+ .driver = {
-+ .name = "ltq_spi",
-+ .owner = THIS_MODULE,
-+ },
-+ .remove = __exit_p(ltq_spi_remove),
-+};
-+
-+static int __init ltq_spi_init(void)
-+{
-+ return platform_driver_probe(<q_spi_driver, ltq_spi_probe);
-+}
-+module_init(ltq_spi_init);
-+
-+static void __exit ltq_spi_exit(void)
-+{
-+ platform_driver_unregister(<q_spi_driver);
-+}
-+module_exit(ltq_spi_exit);
-+
-+MODULE_DESCRIPTION("Lantiq SoC SPI controller driver");
-+MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:ltq-spi");
--- /dev/null
+From 7fd67cfebce500eaeaf209c303d7c1edf1aa34db Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 21 Mar 2012 18:14:06 +0100
+Subject: [PATCH 43/73] MIPS: NET: several fixes to etop driver
+
+---
+ drivers/net/ethernet/lantiq_etop.c | 208 +++++++++++++++++++-----------------
+ 1 files changed, 108 insertions(+), 100 deletions(-)
+
+diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
+index a084d74..1a807d8 100644
+--- a/drivers/net/ethernet/lantiq_etop.c
++++ b/drivers/net/ethernet/lantiq_etop.c
+@@ -103,15 +103,6 @@
+ /* the newer xway socks have a embedded 3/7 port gbit multiplexer */
+ #define ltq_has_gbit() (ltq_is_ar9() || ltq_is_vr9())
+
+-/* use 2 static channels for TX/RX
+- depending on the SoC we need to use different DMA channels for ethernet */
+-#define LTQ_ETOP_TX_CHANNEL 1
+-#define LTQ_ETOP_RX_CHANNEL ((ltq_is_ase()) ? (5) : \
+- ((ltq_has_gbit()) ? (0) : (6)))
+-
+-#define IS_TX(x) (x == LTQ_ETOP_TX_CHANNEL)
+-#define IS_RX(x) (x == LTQ_ETOP_RX_CHANNEL)
+-
+ #define ltq_etop_r32(x) ltq_r32(ltq_etop_membase + (x))
+ #define ltq_etop_w32(x, y) ltq_w32(x, ltq_etop_membase + (y))
+ #define ltq_etop_w32_mask(x, y, z) \
+@@ -128,8 +119,8 @@ static void __iomem *ltq_etop_membase;
+ static void __iomem *ltq_gbit_membase;
+
+ struct ltq_etop_chan {
+- int idx;
+ int tx_free;
++ int irq;
+ struct net_device *netdev;
+ struct napi_struct napi;
+ struct ltq_dma_channel dma;
+@@ -144,8 +135,8 @@ struct ltq_etop_priv {
+ struct mii_bus *mii_bus;
+ struct phy_device *phydev;
+
+- struct ltq_etop_chan ch[MAX_DMA_CHAN];
+- int tx_free[MAX_DMA_CHAN >> 1];
++ struct ltq_etop_chan txch;
++ struct ltq_etop_chan rxch;
+
+ spinlock_t lock;
+
+@@ -206,8 +197,10 @@ ltq_etop_poll_rx(struct napi_struct *napi, int budget)
+ {
+ struct ltq_etop_chan *ch = container_of(napi,
+ struct ltq_etop_chan, napi);
++ struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
+ int rx = 0;
+ int complete = 0;
++ unsigned long flags;
+
+ while ((rx < budget) && !complete) {
+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+@@ -221,7 +214,9 @@ ltq_etop_poll_rx(struct napi_struct *napi, int budget)
+ }
+ if (complete || !rx) {
+ napi_complete(&ch->napi);
++ spin_lock_irqsave(&priv->lock, flags);
+ ltq_dma_ack_irq(&ch->dma);
++ spin_unlock_irqrestore(&priv->lock, flags);
+ }
+ return rx;
+ }
+@@ -233,7 +228,7 @@ ltq_etop_poll_tx(struct napi_struct *napi, int budget)
+ container_of(napi, struct ltq_etop_chan, napi);
+ struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
+ struct netdev_queue *txq =
+- netdev_get_tx_queue(ch->netdev, ch->idx >> 1);
++ netdev_get_tx_queue(ch->netdev, ch->dma.nr >> 1);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+@@ -251,7 +246,9 @@ ltq_etop_poll_tx(struct napi_struct *napi, int budget)
+ if (netif_tx_queue_stopped(txq))
+ netif_tx_start_queue(txq);
+ napi_complete(&ch->napi);
++ spin_lock_irqsave(&priv->lock, flags);
+ ltq_dma_ack_irq(&ch->dma);
++ spin_unlock_irqrestore(&priv->lock, flags);
+ return 1;
+ }
+
+@@ -259,9 +256,10 @@ static irqreturn_t
+ ltq_etop_dma_irq(int irq, void *_priv)
+ {
+ struct ltq_etop_priv *priv = _priv;
+- int ch = irq - LTQ_DMA_ETOP;
+-
+- napi_schedule(&priv->ch[ch].napi);
++ if (irq == priv->txch.dma.irq)
++ napi_schedule(&priv->txch.napi);
++ else
++ napi_schedule(&priv->rxch.napi);
+ return IRQ_HANDLED;
+ }
+
+@@ -273,7 +271,7 @@ ltq_etop_free_channel(struct net_device *dev, struct ltq_etop_chan *ch)
+ ltq_dma_free(&ch->dma);
+ if (ch->dma.irq)
+ free_irq(ch->dma.irq, priv);
+- if (IS_RX(ch->idx)) {
++ if (ch == &priv->txch) {
+ int desc;
+ for (desc = 0; desc < LTQ_DESC_NUM; desc++)
+ dev_kfree_skb_any(ch->skb[ch->dma.desc]);
+@@ -284,7 +282,6 @@ static void
+ ltq_etop_hw_exit(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+- int i;
+
+ clk_disable(priv->clk_ppe);
+
+@@ -296,9 +293,8 @@ ltq_etop_hw_exit(struct net_device *dev)
+ clk_disable(priv->clk_ephycgu);
+ }
+
+- for (i = 0; i < MAX_DMA_CHAN; i++)
+- if (IS_TX(i) || IS_RX(i))
+- ltq_etop_free_channel(dev, &priv->ch[i]);
++ ltq_etop_free_channel(dev, &priv->txch);
++ ltq_etop_free_channel(dev, &priv->rxch);
+ }
+
+ static void
+@@ -326,8 +322,6 @@ ltq_etop_hw_init(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+ unsigned int mii_mode = priv->pldata->mii_mode;
+- int err = 0;
+- int i;
+
+ clk_enable(priv->clk_ppe);
+
+@@ -369,31 +363,50 @@ ltq_etop_hw_init(struct net_device *dev)
+ /* enable crc generation */
+ ltq_etop_w32(PPE32_CGEN, LQ_PPE32_ENET_MAC_CFG);
+
++ return 0;
++}
++
++static int
++ltq_etop_dma_init(struct net_device *dev)
++{
++ struct ltq_etop_priv *priv = netdev_priv(dev);
++ int tx = 1;
++ int rx = ((ltq_is_ase()) ? (5) : \
++ ((ltq_is_ar9()) ? (0) : (6)));
++ int tx_irq = LTQ_DMA_ETOP + tx;
++ int rx_irq = LTQ_DMA_ETOP + rx;
++ int err;
++
+ ltq_dma_init_port(DMA_PORT_ETOP);
+
+- for (i = 0; i < MAX_DMA_CHAN && !err; i++) {
+- int irq = LTQ_DMA_ETOP + i;
+- struct ltq_etop_chan *ch = &priv->ch[i];
+-
+- ch->idx = ch->dma.nr = i;
+-
+- if (IS_TX(i)) {
+- ltq_dma_alloc_tx(&ch->dma);
+- err = request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
+- "etop_tx", priv);
+- } else if (IS_RX(i)) {
+- ltq_dma_alloc_rx(&ch->dma);
+- for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
+- ch->dma.desc++)
+- if (ltq_etop_alloc_skb(ch))
+- err = -ENOMEM;
+- ch->dma.desc = 0;
+- err = request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
+- "etop_rx", priv);
++ priv->txch.dma.nr = tx;
++ ltq_dma_alloc_tx(&priv->txch.dma);
++ err = request_irq(tx_irq, ltq_etop_dma_irq, IRQF_DISABLED,
++ "eth_tx", priv);
++ if (err) {
++ netdev_err(dev, "failed to allocate tx irq\n");
++ goto err_out;
++ }
++ priv->txch.dma.irq = tx_irq;
++
++ priv->rxch.dma.nr = rx;
++ ltq_dma_alloc_rx(&priv->rxch.dma);
++ for (priv->rxch.dma.desc = 0; priv->rxch.dma.desc < LTQ_DESC_NUM;
++ priv->rxch.dma.desc++) {
++ if (ltq_etop_alloc_skb(&priv->rxch)) {
++ netdev_err(dev, "failed to allocate skbs\n");
++ err = -ENOMEM;
++ goto err_out;
+ }
+- if (!err)
+- ch->dma.irq = irq;
+ }
++ priv->rxch.dma.desc = 0;
++ err = request_irq(rx_irq, ltq_etop_dma_irq, IRQF_DISABLED,
++ "eth_rx", priv);
++ if (err)
++ netdev_err(dev, "failed to allocate rx irq\n");
++ else
++ priv->rxch.dma.irq = rx_irq;
++err_out:
+ return err;
+ }
+
+@@ -410,7 +423,10 @@ ltq_etop_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+
+- return phy_ethtool_gset(priv->phydev, cmd);
++ if (priv->phydev)
++ return phy_ethtool_gset(priv->phydev, cmd);
++ else
++ return 0;
+ }
+
+ static int
+@@ -418,7 +434,10 @@ ltq_etop_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+
+- return phy_ethtool_sset(priv->phydev, cmd);
++ if (priv->phydev)
++ return phy_ethtool_sset(priv->phydev, cmd);
++ else
++ return 0;
+ }
+
+ static int
+@@ -426,7 +445,10 @@ ltq_etop_nway_reset(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+
+- return phy_start_aneg(priv->phydev);
++ if (priv->phydev)
++ return phy_start_aneg(priv->phydev);
++ else
++ return 0;
+ }
+
+ static const struct ethtool_ops ltq_etop_ethtool_ops = {
+@@ -618,18 +640,19 @@ static int
+ ltq_etop_open(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+- int i;
++ unsigned long flags;
+
+- for (i = 0; i < MAX_DMA_CHAN; i++) {
+- struct ltq_etop_chan *ch = &priv->ch[i];
++ napi_enable(&priv->txch.napi);
++ napi_enable(&priv->rxch.napi);
++
++ spin_lock_irqsave(&priv->lock, flags);
++ ltq_dma_open(&priv->txch.dma);
++ ltq_dma_open(&priv->rxch.dma);
++ spin_unlock_irqrestore(&priv->lock, flags);
+
+- if (!IS_TX(i) && (!IS_RX(i)))
+- continue;
+- ltq_dma_open(&ch->dma);
+- napi_enable(&ch->napi);
+- }
+ if (priv->phydev)
+ phy_start(priv->phydev);
++
+ netif_tx_start_all_queues(dev);
+ return 0;
+ }
+@@ -638,19 +661,19 @@ static int
+ ltq_etop_stop(struct net_device *dev)
+ {
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+- int i;
++ unsigned long flags;
+
+ netif_tx_stop_all_queues(dev);
+ if (priv->phydev)
+ phy_stop(priv->phydev);
+- for (i = 0; i < MAX_DMA_CHAN; i++) {
+- struct ltq_etop_chan *ch = &priv->ch[i];
++ napi_disable(&priv->txch.napi);
++ napi_disable(&priv->rxch.napi);
++
++ spin_lock_irqsave(&priv->lock, flags);
++ ltq_dma_close(&priv->txch.dma);
++ ltq_dma_close(&priv->rxch.dma);
++ spin_unlock_irqrestore(&priv->lock, flags);
+
+- if (!IS_RX(i) && !IS_TX(i))
+- continue;
+- napi_disable(&ch->napi);
+- ltq_dma_close(&ch->dma);
+- }
+ return 0;
+ }
+
+@@ -660,16 +683,16 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
+ int queue = skb_get_queue_mapping(skb);
+ struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
+ struct ltq_etop_priv *priv = netdev_priv(dev);
+- struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1];
+- struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
++ struct ltq_dma_desc *desc =
++ &priv->txch.dma.desc_base[priv->txch.dma.desc];
+ unsigned long flags;
+ u32 byte_offset;
+ int len;
+
+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+
+- if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
+- dev_kfree_skb_any(skb);
++ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) ||
++ priv->txch.skb[priv->txch.dma.desc]) {
+ netdev_err(dev, "tx ring full\n");
+ netif_tx_stop_queue(txq);
+ return NETDEV_TX_BUSY;
+@@ -677,7 +700,7 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
+
+ /* dma needs to start on a 16 byte aligned address */
+ byte_offset = CPHYSADDR(skb->data) % 16;
+- ch->skb[ch->dma.desc] = skb;
++ priv->txch.skb[priv->txch.dma.desc] = skb;
+
+ dev->trans_start = jiffies;
+
+@@ -687,11 +710,11 @@ ltq_etop_tx(struct sk_buff *skb, struct net_device *dev)
+ wmb();
+ desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
+ LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
+- ch->dma.desc++;
+- ch->dma.desc %= LTQ_DESC_NUM;
++ priv->txch.dma.desc++;
++ priv->txch.dma.desc %= LTQ_DESC_NUM;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+- if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
++ if (priv->txch.dma.desc_base[priv->txch.dma.desc].ctl & LTQ_DMA_OWN)
+ netif_tx_stop_queue(txq);
+
+ return NETDEV_TX_OK;
+@@ -776,6 +799,10 @@ ltq_etop_init(struct net_device *dev)
+ err = ltq_etop_hw_init(dev);
+ if (err)
+ goto err_hw;
++ err = ltq_etop_dma_init(dev);
++ if (err)
++ goto err_hw;
++
+ ltq_etop_change_mtu(dev, 1500);
+
+ memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
+@@ -811,6 +838,9 @@ ltq_etop_tx_timeout(struct net_device *dev)
+ err = ltq_etop_hw_init(dev);
+ if (err)
+ goto err_hw;
++ err = ltq_etop_dma_init(dev);
++ if (err)
++ goto err_hw;
+ dev->trans_start = jiffies;
+ netif_wake_queue(dev);
+ return;
+@@ -834,14 +864,13 @@ static const struct net_device_ops ltq_eth_netdev_ops = {
+ .ndo_tx_timeout = ltq_etop_tx_timeout,
+ };
+
+-static int __init
++static int __devinit
+ ltq_etop_probe(struct platform_device *pdev)
+ {
+ struct net_device *dev;
+ struct ltq_etop_priv *priv;
+ struct resource *res, *gbit_res;
+ int err;
+- int i;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+@@ -917,15 +946,10 @@ ltq_etop_probe(struct platform_device *pdev)
+
+ spin_lock_init(&priv->lock);
+
+- for (i = 0; i < MAX_DMA_CHAN; i++) {
+- if (IS_TX(i))
+- netif_napi_add(dev, &priv->ch[i].napi,
+- ltq_etop_poll_tx, 8);
+- else if (IS_RX(i))
+- netif_napi_add(dev, &priv->ch[i].napi,
+- ltq_etop_poll_rx, 32);
+- priv->ch[i].netdev = dev;
+- }
++ netif_napi_add(dev, &priv->txch.napi, ltq_etop_poll_tx, 8);
++ netif_napi_add(dev, &priv->rxch.napi, ltq_etop_poll_rx, 32);
++ priv->txch.netdev = dev;
++ priv->rxch.netdev = dev;
+
+ err = register_netdev(dev);
+ if (err)
+@@ -955,6 +979,7 @@ ltq_etop_remove(struct platform_device *pdev)
+ }
+
+ static struct platform_driver ltq_mii_driver = {
++ .probe = ltq_etop_probe,
+ .remove = __devexit_p(ltq_etop_remove),
+ .driver = {
+ .name = "ltq_etop",
+@@ -962,24 +987,7 @@ static struct platform_driver ltq_mii_driver = {
+ },
+ };
+
+-int __init
+-init_ltq_etop(void)
+-{
+- int ret = platform_driver_probe(<q_mii_driver, ltq_etop_probe);
+-
+- if (ret)
+- pr_err("ltq_etop: Error registering platfom driver!");
+- return ret;
+-}
+-
+-static void __exit
+-exit_ltq_etop(void)
+-{
+- platform_driver_unregister(<q_mii_driver);
+-}
+-
+-module_init(init_ltq_etop);
+-module_exit(exit_ltq_etop);
++module_platform_driver(ltq_mii_driver);
+
+ MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+ MODULE_DESCRIPTION("Lantiq SoC ETOP");
+--
+1.7.9.1
+
+++ /dev/null
-From 7591c5702cfe842f415e42f387532fe71ea3640f Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 9 Mar 2012 19:03:40 +0100
-Subject: [PATCH 43/70] NET: adds driver for lantiq vr9 ethernet
-
----
- .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 2 +-
- arch/mips/lantiq/xway/devices.c | 20 +
- arch/mips/lantiq/xway/devices.h | 1 +
- drivers/net/ethernet/Kconfig | 6 +
- drivers/net/ethernet/Makefile | 1 +
- drivers/net/ethernet/lantiq_vrx200.c | 1358 ++++++++++++++++++++
- 6 files changed, 1387 insertions(+), 1 deletions(-)
- create mode 100644 drivers/net/ethernet/lantiq_vrx200.c
-
---- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-@@ -102,7 +102,7 @@
-
- /* GBIT - gigabit switch */
- #define LTQ_GBIT_BASE_ADDR 0x1E108000
--#define LTQ_GBIT_SIZE 0x200
-+#define LTQ_GBIT_SIZE 0x4000
-
- /* DMA */
- #define LTQ_DMA_BASE_ADDR 0x1E104100
---- a/arch/mips/lantiq/xway/devices.c
-+++ b/arch/mips/lantiq/xway/devices.c
-@@ -83,6 +83,7 @@ static struct platform_device ltq_etop =
- .name = "ltq_etop",
- .resource = ltq_etop_resources,
- .num_resources = 1,
-+ .id = -1,
- };
-
- void __init
-@@ -96,3 +97,22 @@ ltq_register_etop(struct ltq_eth_data *e
- platform_device_register(<q_etop);
- }
- }
-+
-+/* ethernet */
-+static struct resource ltq_vrx200_resources[] = {
-+ MEM_RES("gbit", LTQ_GBIT_BASE_ADDR, LTQ_GBIT_SIZE),
-+};
-+
-+static struct platform_device ltq_vrx200 = {
-+ .name = "ltq_vrx200",
-+ .resource = ltq_vrx200_resources,
-+ .num_resources = 1,
-+ .id = -1,
-+};
-+
-+void __init
-+ltq_register_vrx200(struct ltq_eth_data *eth)
-+{
-+ ltq_vrx200.dev.platform_data = eth;
-+ platform_device_register(<q_vrx200);
-+}
---- a/arch/mips/lantiq/xway/devices.h
-+++ b/arch/mips/lantiq/xway/devices.h
-@@ -17,5 +17,6 @@ extern void ltq_register_gpio_stp(void);
- extern void ltq_register_ase_asc(void);
- extern void ltq_register_etop(struct ltq_eth_data *eth);
- extern void xway_register_nand(struct mtd_partition *parts, int count);
-+extern void ltq_register_vrx200(struct ltq_eth_data *eth);
-
- #endif
---- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/ethernet/Kconfig
-@@ -84,6 +84,12 @@ config LANTIQ_ETOP
- ---help---
- Support for the MII0 inside the Lantiq SoC
-
-+config LANTIQ_VRX200
-+ tristate "Lantiq SoC vrx200 driver"
-+ depends on SOC_TYPE_XWAY
-+ ---help---
-+ Support for the MII0 inside the Lantiq SoC
-+
- source "drivers/net/ethernet/marvell/Kconfig"
- source "drivers/net/ethernet/mellanox/Kconfig"
- source "drivers/net/ethernet/micrel/Kconfig"
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -35,6 +35,7 @@ obj-$(CONFIG_IP1000) += icplus/
- obj-$(CONFIG_JME) += jme.o
- obj-$(CONFIG_KORINA) += korina.o
- obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
-+obj-$(CONFIG_LANTIQ_VRX200) += lantiq_vrx200.o
- obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
- obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
- obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
---- /dev/null
-+++ b/drivers/net/ethernet/lantiq_vrx200.c
-@@ -0,0 +1,1358 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/errno.h>
-+#include <linux/types.h>
-+#include <linux/interrupt.h>
-+#include <linux/uaccess.h>
-+#include <linux/in.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/phy.h>
-+#include <linux/ip.h>
-+#include <linux/tcp.h>
-+#include <linux/skbuff.h>
-+#include <linux/mm.h>
-+#include <linux/platform_device.h>
-+#include <linux/ethtool.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/io.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/module.h>
-+#include <linux/clk.h>
-+
-+#include <asm/checksum.h>
-+
-+#include <lantiq_soc.h>
-+#include <xway_dma.h>
-+#include <lantiq_platform.h>
-+
-+#define LTQ_SWITCH_BASE 0x1E108000
-+#define LTQ_SWITCH_CORE_BASE LTQ_SWITCH_BASE
-+#define LTQ_SWITCH_TOP_PDI_BASE LTQ_SWITCH_CORE_BASE
-+#define LTQ_SWITCH_BM_PDI_BASE (LTQ_SWITCH_CORE_BASE + 4 * 0x40)
-+#define LTQ_SWITCH_MAC_PDI_0_BASE (LTQ_SWITCH_CORE_BASE + 4 * 0x900)
-+#define LTQ_SWITCH_MAC_PDI_X_BASE(x) (LTQ_SWITCH_MAC_PDI_0_BASE + x * 0x30)
-+#define LTQ_SWITCH_TOPLEVEL_BASE (LTQ_SWITCH_BASE + 4 * 0xC40)
-+#define LTQ_SWITCH_MDIO_PDI_BASE (LTQ_SWITCH_TOPLEVEL_BASE)
-+#define LTQ_SWITCH_MII_PDI_BASE (LTQ_SWITCH_TOPLEVEL_BASE + 4 * 0x36)
-+#define LTQ_SWITCH_PMAC_PDI_BASE (LTQ_SWITCH_TOPLEVEL_BASE + 4 * 0x82)
-+
-+#define LTQ_ETHSW_MAC_CTRL0_PADEN (1 << 8)
-+#define LTQ_ETHSW_MAC_CTRL0_FCS (1 << 7)
-+#define LTQ_ETHSW_MAC_CTRL1_SHORTPRE (1 << 8)
-+#define LTQ_ETHSW_MAC_CTRL2_MLEN (1 << 3)
-+#define LTQ_ETHSW_MAC_CTRL2_LCHKL (1 << 2)
-+#define LTQ_ETHSW_MAC_CTRL2_LCHKS_DIS 0
-+#define LTQ_ETHSW_MAC_CTRL2_LCHKS_UNTAG 1
-+#define LTQ_ETHSW_MAC_CTRL2_LCHKS_TAG 2
-+#define LTQ_ETHSW_MAC_CTRL6_RBUF_DLY_WP_SHIFT 9
-+#define LTQ_ETHSW_MAC_CTRL6_RXBUF_BYPASS (1 << 6)
-+#define LTQ_ETHSW_GLOB_CTRL_SE (1 << 15)
-+#define LTQ_ETHSW_MDC_CFG1_MCEN (1 << 8)
-+#define LTQ_ETHSW_PMAC_HD_CTL_FC (1 << 10)
-+#define LTQ_ETHSW_PMAC_HD_CTL_RC (1 << 4)
-+#define LTQ_ETHSW_PMAC_HD_CTL_AC (1 << 2)
-+#define ADVERTIZE_MPD (1 << 10)
-+
-+#define MDIO_DEVAD_NONE (-1)
-+
-+#define LTQ_ETH_RX_BUFFER_CNT PKTBUFSRX
-+
-+#define LTQ_MDIO_DRV_NAME "ltq-mdio"
-+#define LTQ_ETH_DRV_NAME "ltq-eth"
-+
-+#define LTQ_ETHSW_MAX_GMAC 1
-+#define LTQ_ETHSW_PMAC 1
-+
-+#define ltq_setbits(a, set) \
-+ ltq_w32(ltq_r32(a) | (set), a)
-+
-+enum ltq_reset_modules {
-+ LTQ_RESET_CORE,
-+ LTQ_RESET_DMA,
-+ LTQ_RESET_ETH,
-+ LTQ_RESET_PHY,
-+ LTQ_RESET_HARD,
-+ LTQ_RESET_SOFT,
-+};
-+
-+static inline void
-+dbg_ltq_writel(void *a, unsigned int b)
-+{
-+ ltq_w32(b, a);
-+}
-+
-+int ltq_reset_once(enum ltq_reset_modules module, ulong usec);
-+
-+struct ltq_ethsw_mac_pdi_x_regs {
-+ u32 pstat; /* Port status */
-+ u32 pisr; /* Interrupt status */
-+ u32 pier; /* Interrupt enable */
-+ u32 ctrl_0; /* Control 0 */
-+ u32 ctrl_1; /* Control 1 */
-+ u32 ctrl_2; /* Control 2 */
-+ u32 ctrl_3; /* Control 3 */
-+ u32 ctrl_4; /* Control 4 */
-+ u32 ctrl_5; /* Control 5 */
-+ u32 ctrl_6; /* Control 6 */
-+ u32 bufst; /* TX/RX buffer control */
-+ u32 testen; /* Test enable */
-+};
-+
-+struct ltq_ethsw_mac_pdi_regs {
-+ struct ltq_ethsw_mac_pdi_x_regs mac[12];
-+};
-+
-+struct ltq_ethsw_mdio_pdi_regs {
-+ u32 glob_ctrl; /* Global control 0 */
-+ u32 rsvd0[7];
-+ u32 mdio_ctrl; /* MDIO control */
-+ u32 mdio_read; /* MDIO read data */
-+ u32 mdio_write; /* MDIO write data */
-+ u32 mdc_cfg_0; /* MDC clock configuration 0 */
-+ u32 mdc_cfg_1; /* MDC clock configuration 1 */
-+ u32 rsvd[3];
-+ u32 phy_addr_5; /* PHY address port 5 */
-+ u32 phy_addr_4; /* PHY address port 4 */
-+ u32 phy_addr_3; /* PHY address port 3 */
-+ u32 phy_addr_2; /* PHY address port 2 */
-+ u32 phy_addr_1; /* PHY address port 1 */
-+ u32 phy_addr_0; /* PHY address port 0 */
-+ u32 mdio_stat_0; /* MDIO PHY polling status port 0 */
-+ u32 mdio_stat_1; /* MDIO PHY polling status port 1 */
-+ u32 mdio_stat_2; /* MDIO PHY polling status port 2 */
-+ u32 mdio_stat_3; /* MDIO PHY polling status port 3 */
-+ u32 mdio_stat_4; /* MDIO PHY polling status port 4 */
-+ u32 mdio_stat_5; /* MDIO PHY polling status port 5 */
-+};
-+
-+struct ltq_ethsw_mii_pdi_regs {
-+ u32 mii_cfg0; /* xMII port 0 configuration */
-+ u32 pcdu0; /* Port 0 clock delay configuration */
-+ u32 mii_cfg1; /* xMII port 1 configuration */
-+ u32 pcdu1; /* Port 1 clock delay configuration */
-+ u32 mii_cfg2; /* xMII port 2 configuration */
-+ u32 rsvd0;
-+ u32 mii_cfg3; /* xMII port 3 configuration */
-+ u32 rsvd1;
-+ u32 mii_cfg4; /* xMII port 4 configuration */
-+ u32 rsvd2;
-+ u32 mii_cfg5; /* xMII port 5 configuration */
-+ u32 pcdu5; /* Port 5 clock delay configuration */
-+};
-+
-+struct ltq_ethsw_pmac_pdi_regs {
-+ u32 hd_ctl; /* PMAC header control */
-+ u32 tl; /* PMAC type/length */
-+ u32 sa1; /* PMAC source address 1 */
-+ u32 sa2; /* PMAC source address 2 */
-+ u32 sa3; /* PMAC source address 3 */
-+ u32 da1; /* PMAC destination address 1 */
-+ u32 da2; /* PMAC destination address 2 */
-+ u32 da3; /* PMAC destination address 3 */
-+ u32 vlan; /* PMAC VLAN */
-+ u32 rx_ipg; /* PMAC interpacket gap in RX direction */
-+ u32 st_etype; /* PMAC special tag ethertype */
-+ u32 ewan; /* PMAC ethernet WAN group */
-+};
-+
-+struct ltq_mdio_phy_addr_reg {
-+ union {
-+ struct {
-+ unsigned rsvd:1;
-+ unsigned lnkst:2; /* Link status control */
-+ unsigned speed:2; /* Speed control */
-+ unsigned fdup:2; /* Full duplex control */
-+ unsigned fcontx:2; /* Flow control mode TX */
-+ unsigned fconrx:2; /* Flow control mode RX */
-+ unsigned addr:5; /* PHY address */
-+ } bits;
-+ u16 val;
-+ };
-+};
-+
-+enum ltq_mdio_phy_addr_lnkst {
-+ LTQ_MDIO_PHY_ADDR_LNKST_AUTO = 0,
-+ LTQ_MDIO_PHY_ADDR_LNKST_UP = 1,
-+ LTQ_MDIO_PHY_ADDR_LNKST_DOWN = 2,
-+};
-+
-+enum ltq_mdio_phy_addr_speed {
-+ LTQ_MDIO_PHY_ADDR_SPEED_M10 = 0,
-+ LTQ_MDIO_PHY_ADDR_SPEED_M100 = 1,
-+ LTQ_MDIO_PHY_ADDR_SPEED_G1 = 2,
-+ LTQ_MDIO_PHY_ADDR_SPEED_AUTO = 3,
-+};
-+
-+enum ltq_mdio_phy_addr_fdup {
-+ LTQ_MDIO_PHY_ADDR_FDUP_AUTO = 0,
-+ LTQ_MDIO_PHY_ADDR_FDUP_ENABLE = 1,
-+ LTQ_MDIO_PHY_ADDR_FDUP_DISABLE = 3,
-+};
-+
-+enum ltq_mdio_phy_addr_fcon {
-+ LTQ_MDIO_PHY_ADDR_FCON_AUTO = 0,
-+ LTQ_MDIO_PHY_ADDR_FCON_ENABLE = 1,
-+ LTQ_MDIO_PHY_ADDR_FCON_DISABLE = 3,
-+};
-+
-+struct ltq_mii_mii_cfg_reg {
-+ union {
-+ struct {
-+ unsigned res:1; /* Hardware reset */
-+ unsigned en:1; /* xMII interface enable */
-+ unsigned isol:1; /* xMII interface isolate */
-+ unsigned ldclkdis:1; /* Link down clock disable */
-+ unsigned rsvd:1;
-+ unsigned crs:2; /* CRS sensitivity config */
-+ unsigned rgmii_ibs:1; /* RGMII In Band status */
-+ unsigned rmii:1; /* RMII ref clock direction */
-+ unsigned miirate:3; /* xMII interface clock rate */
-+ unsigned miimode:4; /* xMII interface mode */
-+ } bits;
-+ u16 val;
-+ };
-+};
-+
-+enum ltq_mii_mii_cfg_miirate {
-+ LTQ_MII_MII_CFG_MIIRATE_M2P5 = 0,
-+ LTQ_MII_MII_CFG_MIIRATE_M25 = 1,
-+ LTQ_MII_MII_CFG_MIIRATE_M125 = 2,
-+ LTQ_MII_MII_CFG_MIIRATE_M50 = 3,
-+ LTQ_MII_MII_CFG_MIIRATE_AUTO = 4,
-+};
-+
-+enum ltq_mii_mii_cfg_miimode {
-+ LTQ_MII_MII_CFG_MIIMODE_MIIP = 0,
-+ LTQ_MII_MII_CFG_MIIMODE_MIIM = 1,
-+ LTQ_MII_MII_CFG_MIIMODE_RMIIP = 2,
-+ LTQ_MII_MII_CFG_MIIMODE_RMIIM = 3,
-+ LTQ_MII_MII_CFG_MIIMODE_RGMII = 4,
-+};
-+
-+struct ltq_eth_priv {
-+ struct ltq_dma_device *dma_dev;
-+ struct mii_dev *bus;
-+ struct eth_device *dev;
-+ struct phy_device *phymap[LTQ_ETHSW_MAX_GMAC];
-+ int rx_num;
-+};
-+
-+enum ltq_mdio_mbusy {
-+ LTQ_MDIO_MBUSY_IDLE = 0,
-+ LTQ_MDIO_MBUSY_BUSY = 1,
-+};
-+
-+enum ltq_mdio_op {
-+ LTQ_MDIO_OP_WRITE = 1,
-+ LTQ_MDIO_OP_READ = 2,
-+};
-+
-+struct ltq_mdio_access {
-+ union {
-+ struct {
-+ unsigned rsvd:3;
-+ unsigned mbusy:1;
-+ unsigned op:2;
-+ unsigned phyad:5;
-+ unsigned regad:5;
-+ } bits;
-+ u16 val;
-+ };
-+};
-+
-+enum LTQ_ETH_PORT_FLAGS {
-+ LTQ_ETH_PORT_NONE = 0,
-+ LTQ_ETH_PORT_PHY = 1,
-+ LTQ_ETH_PORT_SWITCH = (1 << 1),
-+ LTQ_ETH_PORT_MAC = (1 << 2),
-+};
-+
-+struct ltq_eth_port_config {
-+ u8 num;
-+ u8 phy_addr;
-+ u16 flags;
-+ phy_interface_t phy_if;
-+};
-+
-+struct ltq_eth_board_config {
-+ const struct ltq_eth_port_config *ports;
-+ int num_ports;
-+};
-+
-+static const struct ltq_eth_port_config eth_port_config[] = {
-+ /* GMAC0: external Lantiq PEF7071 10/100/1000 PHY for LAN port 0 */
-+ { 0, 0x0, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
-+ /* GMAC1: external Lantiq PEF7071 10/100/1000 PHY for LAN port 1 */
-+ { 1, 0x1, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
-+};
-+
-+static const struct ltq_eth_board_config board_config = {
-+ .ports = eth_port_config,
-+ .num_ports = ARRAY_SIZE(eth_port_config),
-+};
-+
-+static struct ltq_ethsw_mac_pdi_regs *ltq_ethsw_mac_pdi_regs =
-+ (struct ltq_ethsw_mac_pdi_regs *) CKSEG1ADDR(LTQ_SWITCH_MAC_PDI_0_BASE);
-+
-+static struct ltq_ethsw_mdio_pdi_regs *ltq_ethsw_mdio_pdi_regs =
-+ (struct ltq_ethsw_mdio_pdi_regs *) CKSEG1ADDR(LTQ_SWITCH_MDIO_PDI_BASE);
-+
-+static struct ltq_ethsw_mii_pdi_regs *ltq_ethsw_mii_pdi_regs =
-+ (struct ltq_ethsw_mii_pdi_regs *) CKSEG1ADDR(LTQ_SWITCH_MII_PDI_BASE);
-+
-+static struct ltq_ethsw_pmac_pdi_regs *ltq_ethsw_pmac_pdi_regs =
-+ (struct ltq_ethsw_pmac_pdi_regs *) CKSEG1ADDR(LTQ_SWITCH_PMAC_PDI_BASE);
-+
-+
-+#define MAX_DMA_CHAN 0x8
-+#define MAX_DMA_CRC_LEN 0x4
-+#define MAX_DMA_DATA_LEN 0x600
-+
-+/* use 2 static channels for TX/RX
-+ depending on the SoC we need to use different DMA channels for ethernet */
-+#define LTQ_ETOP_TX_CHANNEL 1
-+#define LTQ_ETOP_RX_CHANNEL 0
-+
-+#define IS_TX(x) (x == LTQ_ETOP_TX_CHANNEL)
-+#define IS_RX(x) (x == LTQ_ETOP_RX_CHANNEL)
-+
-+#define DRV_VERSION "1.0"
-+
-+static void __iomem *ltq_vrx200_membase;
-+
-+struct ltq_vrx200_chan {
-+ int idx;
-+ int tx_free;
-+ struct net_device *netdev;
-+ struct napi_struct napi;
-+ struct ltq_dma_channel dma;
-+ struct sk_buff *skb[LTQ_DESC_NUM];
-+};
-+
-+struct ltq_vrx200_priv {
-+ struct net_device *netdev;
-+ struct ltq_eth_data *pldata;
-+ struct resource *res;
-+
-+ struct mii_bus *mii_bus;
-+ struct phy_device *phydev;
-+
-+ struct ltq_vrx200_chan ch[MAX_DMA_CHAN];
-+ int tx_free[MAX_DMA_CHAN >> 1];
-+
-+ spinlock_t lock;
-+
-+ struct clk *clk_ppe;
-+};
-+
-+static int ltq_vrx200_mdio_wr(struct mii_bus *bus, int phy_addr,
-+ int phy_reg, u16 phy_data);
-+
-+static int
-+ltq_vrx200_alloc_skb(struct ltq_vrx200_chan *ch)
-+{
-+ ch->skb[ch->dma.desc] = dev_alloc_skb(MAX_DMA_DATA_LEN);
-+ if (!ch->skb[ch->dma.desc])
-+ return -ENOMEM;
-+ ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
-+ ch->skb[ch->dma.desc]->data, MAX_DMA_DATA_LEN,
-+ DMA_FROM_DEVICE);
-+ ch->dma.desc_base[ch->dma.desc].addr =
-+ CPHYSADDR(ch->skb[ch->dma.desc]->data);
-+ ch->dma.desc_base[ch->dma.desc].ctl =
-+ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
-+ MAX_DMA_DATA_LEN;
-+ skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN);
-+ return 0;
-+}
-+
-+static void
-+ltq_vrx200_hw_receive(struct ltq_vrx200_chan *ch)
-+{
-+ struct ltq_vrx200_priv *priv = netdev_priv(ch->netdev);
-+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-+ struct sk_buff *skb = ch->skb[ch->dma.desc];
-+ int len = (desc->ctl & LTQ_DMA_SIZE_MASK) - MAX_DMA_CRC_LEN;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&priv->lock, flags);
-+ if (ltq_vrx200_alloc_skb(ch)) {
-+ netdev_err(ch->netdev,
-+ "failed to allocate new rx buffer, stopping DMA\n");
-+ ltq_dma_close(&ch->dma);
-+ }
-+ ch->dma.desc++;
-+ ch->dma.desc %= LTQ_DESC_NUM;
-+ spin_unlock_irqrestore(&priv->lock, flags);
-+
-+ skb_put(skb, len);
-+ skb->dev = ch->netdev;
-+ skb->protocol = eth_type_trans(skb, ch->netdev);
-+ netif_receive_skb(skb);
-+}
-+
-+static int
-+ltq_vrx200_poll_rx(struct napi_struct *napi, int budget)
-+{
-+ struct ltq_vrx200_chan *ch = container_of(napi,
-+ struct ltq_vrx200_chan, napi);
-+ struct ltq_vrx200_priv *priv = netdev_priv(ch->netdev);
-+ int rx = 0;
-+ int complete = 0;
-+ unsigned long flags;
-+
-+ while ((rx < budget) && !complete) {
-+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-+
-+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
-+ ltq_vrx200_hw_receive(ch);
-+ rx++;
-+ } else {
-+ complete = 1;
-+ }
-+ }
-+ if (complete || !rx) {
-+ napi_complete(&ch->napi);
-+ spin_lock_irqsave(&priv->lock, flags);
-+ ltq_dma_ack_irq(&ch->dma);
-+ spin_unlock_irqrestore(&priv->lock, flags);
-+ }
-+ return rx;
-+}
-+
-+static int
-+ltq_vrx200_poll_tx(struct napi_struct *napi, int budget)
-+{
-+ struct ltq_vrx200_chan *ch =
-+ container_of(napi, struct ltq_vrx200_chan, napi);
-+ struct ltq_vrx200_priv *priv = netdev_priv(ch->netdev);
-+ struct netdev_queue *txq =
-+ netdev_get_tx_queue(ch->netdev, ch->idx >> 1);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&priv->lock, flags);
-+ while ((ch->dma.desc_base[ch->tx_free].ctl &
-+ (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
-+ dev_kfree_skb_any(ch->skb[ch->tx_free]);
-+ ch->skb[ch->tx_free] = NULL;
-+ memset(&ch->dma.desc_base[ch->tx_free], 0,
-+ sizeof(struct ltq_dma_desc));
-+ ch->tx_free++;
-+ ch->tx_free %= LTQ_DESC_NUM;
-+ }
-+ spin_unlock_irqrestore(&priv->lock, flags);
-+
-+ if (netif_tx_queue_stopped(txq))
-+ netif_tx_start_queue(txq);
-+ napi_complete(&ch->napi);
-+ spin_lock_irqsave(&priv->lock, flags);
-+ ltq_dma_ack_irq(&ch->dma);
-+ spin_unlock_irqrestore(&priv->lock, flags);
-+ return 1;
-+}
-+
-+static irqreturn_t
-+ltq_vrx200_dma_irq(int irq, void *_priv)
-+{
-+ struct ltq_vrx200_priv *priv = _priv;
-+ int ch = irq - LTQ_DMA_ETOP;
-+
-+ napi_schedule(&priv->ch[ch].napi);
-+ return IRQ_HANDLED;
-+}
-+
-+static void
-+ltq_vrx200_free_channel(struct net_device *dev, struct ltq_vrx200_chan *ch)
-+{
-+ struct ltq_vrx200_priv *priv = netdev_priv(dev);
-+
-+ ltq_dma_free(&ch->dma);
-+ if (ch->dma.irq)
-+ free_irq(ch->dma.irq, priv);
-+ if (IS_RX(ch->idx)) {
-+ int desc;
-+ for (desc = 0; desc < LTQ_DESC_NUM; desc++)
-+ dev_kfree_skb_any(ch->skb[ch->dma.desc]);
-+ }
-+}
-+
-+static void
-+ltq_vrx200_hw_exit(struct net_device *dev)
-+{
-+ struct ltq_vrx200_priv *priv = netdev_priv(dev);
-+ int i;
-+
-+ clk_disable(priv->clk_ppe);
-+
-+ for (i = 0; i < MAX_DMA_CHAN; i++)
-+ if (IS_TX(i) || IS_RX(i))
-+ ltq_vrx200_free_channel(dev, &priv->ch[i]);
-+}
-+
-+static void *ltq_eth_phy_addr_reg(int num)
-+{
-+ switch (num) {
-+ case 0:
-+ return <q_ethsw_mdio_pdi_regs->phy_addr_0;
-+ case 1:
-+ return <q_ethsw_mdio_pdi_regs->phy_addr_1;
-+ case 2:
-+ return <q_ethsw_mdio_pdi_regs->phy_addr_2;
-+ case 3:
-+ return <q_ethsw_mdio_pdi_regs->phy_addr_3;
-+ case 4:
-+ return <q_ethsw_mdio_pdi_regs->phy_addr_4;
-+ case 5:
-+ return <q_ethsw_mdio_pdi_regs->phy_addr_5;
-+ }
-+
-+ return NULL;
-+}
-+
-+static void *ltq_eth_mii_cfg_reg(int num)
-+{
-+ switch (num) {
-+ case 0:
-+ return <q_ethsw_mii_pdi_regs->mii_cfg0;
-+ case 1:
-+ return <q_ethsw_mii_pdi_regs->mii_cfg1;
-+ case 2:
-+ return <q_ethsw_mii_pdi_regs->mii_cfg2;
-+ case 3:
-+ return <q_ethsw_mii_pdi_regs->mii_cfg3;
-+ case 4:
-+ return <q_ethsw_mii_pdi_regs->mii_cfg4;
-+ case 5:
-+ return <q_ethsw_mii_pdi_regs->mii_cfg5;
-+ }
-+
-+ return NULL;
-+}
-+
-+static void ltq_eth_gmac_update(struct phy_device *phydev, int num)
-+{
-+ struct ltq_mdio_phy_addr_reg phy_addr_reg;
-+ struct ltq_mii_mii_cfg_reg mii_cfg_reg;
-+ void *phy_addr = ltq_eth_phy_addr_reg(num);
-+ void *mii_cfg = ltq_eth_mii_cfg_reg(num);
-+
-+ phy_addr_reg.val = ltq_r32(phy_addr);
-+ mii_cfg_reg.val = ltq_r32(mii_cfg);
-+
-+ phy_addr_reg.bits.addr = phydev->addr;
-+
-+ if (phydev->link)
-+ phy_addr_reg.bits.lnkst = LTQ_MDIO_PHY_ADDR_LNKST_UP;
-+ else
-+ phy_addr_reg.bits.lnkst = LTQ_MDIO_PHY_ADDR_LNKST_DOWN;
-+
-+ switch (phydev->speed) {
-+ case SPEED_1000:
-+ phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_G1;
-+ mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M125;
-+ break;
-+ case SPEED_100:
-+ phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_M100;
-+ switch (mii_cfg_reg.bits.miimode) {
-+ case LTQ_MII_MII_CFG_MIIMODE_RMIIM:
-+ case LTQ_MII_MII_CFG_MIIMODE_RMIIP:
-+ mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M50;
-+ break;
-+ default:
-+ mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M25;
-+ break;
-+ }
-+ break;
-+ default:
-+ phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_M10;
-+ mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M2P5;
-+ break;
-+ }
-+
-+ if (phydev->duplex == DUPLEX_FULL)
-+ phy_addr_reg.bits.fdup = LTQ_MDIO_PHY_ADDR_FDUP_ENABLE;
-+ else
-+ phy_addr_reg.bits.fdup = LTQ_MDIO_PHY_ADDR_FDUP_DISABLE;
-+
-+ dbg_ltq_writel(phy_addr, phy_addr_reg.val);
-+ dbg_ltq_writel(mii_cfg, mii_cfg_reg.val);
-+ udelay(1);
-+}
-+
-+
-+static void ltq_eth_port_config(struct ltq_vrx200_priv *priv,
-+ const struct ltq_eth_port_config *port)
-+{
-+ struct ltq_mii_mii_cfg_reg mii_cfg_reg;
-+ void *mii_cfg = ltq_eth_mii_cfg_reg(port->num);
-+ int setup_gpio = 0;
-+
-+ mii_cfg_reg.val = ltq_r32(mii_cfg);
-+
-+
-+ switch (port->num) {
-+ case 0: /* xMII0 */
-+ case 1: /* xMII1 */
-+ switch (port->phy_if) {
-+ case PHY_INTERFACE_MODE_MII:
-+ if (port->flags & LTQ_ETH_PORT_PHY)
-+ /* MII MAC mode, connected to external PHY */
-+ mii_cfg_reg.bits.miimode =
-+ LTQ_MII_MII_CFG_MIIMODE_MIIM;
-+ else
-+ /* MII PHY mode, connected to external MAC */
-+ mii_cfg_reg.bits.miimode =
-+ LTQ_MII_MII_CFG_MIIMODE_MIIP;
-+ setup_gpio = 1;
-+ break;
-+ case PHY_INTERFACE_MODE_RMII:
-+ if (port->flags & LTQ_ETH_PORT_PHY)
-+ /* RMII MAC mode, connected to external PHY */
-+ mii_cfg_reg.bits.miimode =
-+ LTQ_MII_MII_CFG_MIIMODE_RMIIM;
-+ else
-+ /* RMII PHY mode, connected to external MAC */
-+ mii_cfg_reg.bits.miimode =
-+ LTQ_MII_MII_CFG_MIIMODE_RMIIP;
-+ setup_gpio = 1;
-+ break;
-+ case PHY_INTERFACE_MODE_RGMII:
-+ /* RGMII MAC mode, connected to external PHY */
-+ mii_cfg_reg.bits.miimode =
-+ LTQ_MII_MII_CFG_MIIMODE_RGMII;
-+ setup_gpio = 1;
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ case 2: /* internal GPHY0 */
-+ case 3: /* internal GPHY0 */
-+ case 4: /* internal GPHY1 */
-+ switch (port->phy_if) {
-+ case PHY_INTERFACE_MODE_MII:
-+ case PHY_INTERFACE_MODE_GMII:
-+ /* MII MAC mode, connected to internal GPHY */
-+ mii_cfg_reg.bits.miimode =
-+ LTQ_MII_MII_CFG_MIIMODE_MIIM;
-+ setup_gpio = 1;
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ case 5: /* internal GPHY1 or xMII2 */
-+ switch (port->phy_if) {
-+ case PHY_INTERFACE_MODE_MII:
-+ /* MII MAC mode, connected to internal GPHY */
-+ mii_cfg_reg.bits.miimode =
-+ LTQ_MII_MII_CFG_MIIMODE_MIIM;
-+ setup_gpio = 1;
-+ break;
-+ case PHY_INTERFACE_MODE_RGMII:
-+ /* RGMII MAC mode, connected to external PHY */
-+ mii_cfg_reg.bits.miimode =
-+ LTQ_MII_MII_CFG_MIIMODE_RGMII;
-+ setup_gpio = 1;
-+ break;
-+ default:
-+ break;
-+ }
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ /* Enable MII interface */
-+ mii_cfg_reg.bits.en = port->flags ? 1 : 0;
-+ dbg_ltq_writel(mii_cfg, mii_cfg_reg.val);
-+
-+}
-+
-+static void ltq_eth_gmac_init(int num)
-+{
-+ struct ltq_mdio_phy_addr_reg phy_addr_reg;
-+ struct ltq_mii_mii_cfg_reg mii_cfg_reg;
-+ void *phy_addr = ltq_eth_phy_addr_reg(num);
-+ void *mii_cfg = ltq_eth_mii_cfg_reg(num);
-+ struct ltq_ethsw_mac_pdi_x_regs *mac_pdi_regs;
-+
-+ mac_pdi_regs = <q_ethsw_mac_pdi_regs->mac[num];
-+
-+ /* Reset PHY status to link down */
-+ phy_addr_reg.val = ltq_r32(phy_addr);
-+ phy_addr_reg.bits.addr = num;
-+ phy_addr_reg.bits.lnkst = LTQ_MDIO_PHY_ADDR_LNKST_DOWN;
-+ phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_M10;
-+ phy_addr_reg.bits.fdup = LTQ_MDIO_PHY_ADDR_FDUP_DISABLE;
-+ dbg_ltq_writel(phy_addr, phy_addr_reg.val);
-+
-+ /* Reset and disable MII interface */
-+ mii_cfg_reg.val = ltq_r32(mii_cfg);
-+ mii_cfg_reg.bits.en = 0;
-+ mii_cfg_reg.bits.res = 1;
-+ mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M2P5;
-+ dbg_ltq_writel(mii_cfg, mii_cfg_reg.val);
-+
-+ /*
-+ * Enable padding of short frames, enable frame checksum generation
-+ * in transmit direction
-+ */
-+ dbg_ltq_writel(&mac_pdi_regs->ctrl_0, LTQ_ETHSW_MAC_CTRL0_PADEN |
-+ LTQ_ETHSW_MAC_CTRL0_FCS);
-+
-+ /* Set inter packet gap size to 12 bytes */
-+ dbg_ltq_writel(&mac_pdi_regs->ctrl_1, 12);
-+
-+ /*
-+ * Configure frame length checks:
-+ * - allow jumbo frames
-+ * - enable long length check
-+ * - enable short length without VLAN tags
-+ */
-+ dbg_ltq_writel(&mac_pdi_regs->ctrl_2, LTQ_ETHSW_MAC_CTRL2_MLEN |
-+ LTQ_ETHSW_MAC_CTRL2_LCHKL |
-+ LTQ_ETHSW_MAC_CTRL2_LCHKS_UNTAG);
-+}
-+
-+
-+static void ltq_eth_pmac_init(void)
-+{
-+ struct ltq_ethsw_mac_pdi_x_regs *mac_pdi_regs;
-+
-+ mac_pdi_regs = <q_ethsw_mac_pdi_regs->mac[LTQ_ETHSW_PMAC];
-+
-+ /*
-+ * Enable padding of short frames, enable frame checksum generation
-+ * in transmit direction
-+ */
-+ dbg_ltq_writel(&mac_pdi_regs->ctrl_0, LTQ_ETHSW_MAC_CTRL0_PADEN |
-+ LTQ_ETHSW_MAC_CTRL0_FCS);
-+
-+ /*
-+ * Configure frame length checks:
-+ * - allow jumbo frames
-+ * - enable long length check
-+ * - enable short length without VLAN tags
-+ */
-+ dbg_ltq_writel(&mac_pdi_regs->ctrl_2, LTQ_ETHSW_MAC_CTRL2_MLEN |
-+ LTQ_ETHSW_MAC_CTRL2_LCHKL |
-+ LTQ_ETHSW_MAC_CTRL2_LCHKS_UNTAG);
-+
-+ /*
-+ * Apply workaround for buffer congestion:
-+ * - shorten preambel to 1 byte
-+ * - set minimum inter packet gap size to 7 bytes
-+ * - enable receive buffer bypass mode
-+ */
-+ dbg_ltq_writel(&mac_pdi_regs->ctrl_1, LTQ_ETHSW_MAC_CTRL1_SHORTPRE | 7);
-+ dbg_ltq_writel(&mac_pdi_regs->ctrl_6,
-+ (6 << LTQ_ETHSW_MAC_CTRL6_RBUF_DLY_WP_SHIFT) |
-+ LTQ_ETHSW_MAC_CTRL6_RXBUF_BYPASS);
-+
-+ /* Set request assertion threshold to 8, IPG counter to 11 */
-+ dbg_ltq_writel(<q_ethsw_pmac_pdi_regs->rx_ipg, 0x8B);
-+
-+ /*
-+ * Configure frame header control:
-+ * - enable reaction on pause frames (flow control)
-+ * - remove CRC for packets from PMAC to DMA
-+ * - add CRC for packets from DMA to PMAC
-+ */
-+ dbg_ltq_writel(<q_ethsw_pmac_pdi_regs->hd_ctl, LTQ_ETHSW_PMAC_HD_CTL_FC |
-+ /*LTQ_ETHSW_PMAC_HD_CTL_RC | */LTQ_ETHSW_PMAC_HD_CTL_AC);
-+}
-+
-+static int
-+ltq_vrx200_hw_init(struct net_device *dev)
-+{
-+ struct ltq_vrx200_priv *priv = netdev_priv(dev);
-+ int err = 0;
-+ int i;
-+
-+ netdev_info(dev, "setting up dma\n");
-+ ltq_dma_init_port(DMA_PORT_ETOP);
-+
-+ netdev_info(dev, "setting up pmu\n");
-+ clk_enable(priv->clk_ppe);
-+
-+ /* Reset ethernet and switch subsystems */
-+ netdev_info(dev, "reset core\n");
-+ ltq_reset_once(BIT(8), 10);
-+
-+ /* Enable switch macro */
-+ ltq_setbits(<q_ethsw_mdio_pdi_regs->glob_ctrl,
-+ LTQ_ETHSW_GLOB_CTRL_SE);
-+
-+ /* Disable MDIO auto-polling for all ports */
-+ dbg_ltq_writel(<q_ethsw_mdio_pdi_regs->mdc_cfg_0, 0);
-+
-+ /*
-+ * Enable and set MDIO management clock to 2.5 MHz. This is the
-+ * maximum clock for FE PHYs.
-+ * Formula for clock is:
-+ *
-+ * 50 MHz
-+ * x = ----------- - 1
-+ * 2 * f_MDC
-+ */
-+ dbg_ltq_writel(<q_ethsw_mdio_pdi_regs->mdc_cfg_1,
-+ LTQ_ETHSW_MDC_CFG1_MCEN | 9);
-+
-+ /* Init MAC connected to CPU */
-+ ltq_eth_pmac_init();
-+
-+ /* Init MACs connected to external MII interfaces */
-+ for (i = 0; i < LTQ_ETHSW_MAX_GMAC; i++)
-+ ltq_eth_gmac_init(i);
-+
-+ for (i = 0; i < MAX_DMA_CHAN && !err; i++) {
-+ int irq = LTQ_DMA_ETOP + i;
-+ struct ltq_vrx200_chan *ch = &priv->ch[i];
-+
-+ ch->idx = ch->dma.nr = i;
-+
-+ if (IS_TX(i)) {
-+ ltq_dma_alloc_tx(&ch->dma);
-+ err = request_irq(irq, ltq_vrx200_dma_irq, IRQF_DISABLED,
-+ "vrx200_tx", priv);
-+ } else if (IS_RX(i)) {
-+ ltq_dma_alloc_rx(&ch->dma);
-+ for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
-+ ch->dma.desc++)
-+ if (ltq_vrx200_alloc_skb(ch))
-+ err = -ENOMEM;
-+ ch->dma.desc = 0;
-+ err = request_irq(irq, ltq_vrx200_dma_irq, IRQF_DISABLED,
-+ "vrx200_rx", priv);
-+ }
-+ if (!err)
-+ ch->dma.irq = irq;
-+ }
-+ for (i = 0; i < board_config.num_ports; i++)
-+ ltq_eth_port_config(priv, &board_config.ports[i]);
-+ return err;
-+}
-+
-+static void
-+ltq_vrx200_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
-+{
-+ strcpy(info->driver, "Lantiq ETOP");
-+ strcpy(info->bus_info, "internal");
-+ strcpy(info->version, DRV_VERSION);
-+}
-+
-+static int
-+ltq_vrx200_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-+{
-+ struct ltq_vrx200_priv *priv = netdev_priv(dev);
-+
-+ return phy_ethtool_gset(priv->phydev, cmd);
-+}
-+
-+static int
-+ltq_vrx200_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-+{
-+ struct ltq_vrx200_priv *priv = netdev_priv(dev);
-+
-+ return phy_ethtool_sset(priv->phydev, cmd);
-+}
-+
-+static int
-+ltq_vrx200_nway_reset(struct net_device *dev)
-+{
-+ struct ltq_vrx200_priv *priv = netdev_priv(dev);
-+
-+ return phy_start_aneg(priv->phydev);
-+}
-+
-+static const struct ethtool_ops ltq_vrx200_ethtool_ops = {
-+ .get_drvinfo = ltq_vrx200_get_drvinfo,
-+ .get_settings = ltq_vrx200_get_settings,
-+ .set_settings = ltq_vrx200_set_settings,
-+ .nway_reset = ltq_vrx200_nway_reset,
-+};
-+
-+static inline int ltq_mdio_poll(struct mii_bus *bus)
-+{
-+ struct ltq_mdio_access acc;
-+ unsigned cnt = 10000;
-+
-+ while (likely(cnt--)) {
-+ acc.val = ltq_r32(<q_ethsw_mdio_pdi_regs->mdio_ctrl);
-+ if (!acc.bits.mbusy)
-+ return 0;
-+ }
-+
-+ return 1;
-+}
-+
-+static int
-+ltq_vrx200_mdio_wr(struct mii_bus *bus, int addr, int regnum, u16 val)
-+{
-+ struct ltq_mdio_access acc;
-+ int ret;
-+
-+ acc.val = 0;
-+ acc.bits.mbusy = LTQ_MDIO_MBUSY_BUSY;
-+ acc.bits.op = LTQ_MDIO_OP_WRITE;
-+ acc.bits.phyad = addr;
-+ acc.bits.regad = regnum;
-+
-+ ret = ltq_mdio_poll(bus);
-+ if (ret)
-+ return ret;
-+
-+ dbg_ltq_writel(<q_ethsw_mdio_pdi_regs->mdio_write, val);
-+ dbg_ltq_writel(<q_ethsw_mdio_pdi_regs->mdio_ctrl, acc.val);
-+
-+ return 0;
-+}
-+
-+static int
-+ltq_vrx200_mdio_rd(struct mii_bus *bus, int addr, int regnum)
-+{
-+ struct ltq_mdio_access acc;
-+ int ret;
-+
-+ acc.val = 0;
-+ acc.bits.mbusy = LTQ_MDIO_MBUSY_BUSY;
-+ acc.bits.op = LTQ_MDIO_OP_READ;
-+ acc.bits.phyad = addr;
-+ acc.bits.regad = regnum;
-+
-+ ret = ltq_mdio_poll(bus);
-+ if (ret)
-+ goto timeout;
-+
-+ dbg_ltq_writel(<q_ethsw_mdio_pdi_regs->mdio_ctrl, acc.val);
-+
-+ ret = ltq_mdio_poll(bus);
-+ if (ret)
-+ goto timeout;
-+
-+ ret = ltq_r32(<q_ethsw_mdio_pdi_regs->mdio_read);
-+
-+ return ret;
-+timeout:
-+ return -1;
-+}
-+
-+static void
-+ltq_vrx200_mdio_link(struct net_device *dev)
-+{
-+ struct ltq_vrx200_priv *priv = netdev_priv(dev);
-+ ltq_eth_gmac_update(priv->phydev, 0);
-+}
-+
-+static int
-+ltq_vrx200_mdio_probe(struct net_device *dev)
-+{
-+ struct ltq_vrx200_priv *priv = netdev_priv(dev);
-+ struct phy_device *phydev = NULL;
-+ int val;
-+
-+ phydev = priv->mii_bus->phy_map[0];
-+
-+ if (!phydev) {
-+ netdev_err(dev, "no PHY found\n");
-+ return -ENODEV;
-+ }
-+
-+ phydev = phy_connect(dev, dev_name(&phydev->dev), <q_vrx200_mdio_link,
-+ 0, 0);
-+
-+ if (IS_ERR(phydev)) {
-+ netdev_err(dev, "Could not attach to PHY\n");
-+ return PTR_ERR(phydev);
-+ }
-+
-+ phydev->supported &= (SUPPORTED_10baseT_Half
-+ | SUPPORTED_10baseT_Full
-+ | SUPPORTED_100baseT_Half
-+ | SUPPORTED_100baseT_Full
-+ | SUPPORTED_1000baseT_Half
-+ | SUPPORTED_1000baseT_Full
-+ | SUPPORTED_Autoneg
-+ | SUPPORTED_MII
-+ | SUPPORTED_TP);
-+ phydev->advertising = phydev->supported;
-+ priv->phydev = phydev;
-+
-+ pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
-+ dev->name, phydev->drv->name,
-+ dev_name(&phydev->dev), phydev->irq);
-+
-+ val = ltq_vrx200_mdio_rd(priv->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000);
-+ val |= ADVERTIZE_MPD;
-+ ltq_vrx200_mdio_wr(priv->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000, val);
-+ ltq_vrx200_mdio_wr(priv->mii_bus, 0, 0, 0x1040);
-+
-+ phy_start_aneg(phydev);
-+
-+ return 0;
-+}
-+
-+static int
-+ltq_vrx200_mdio_init(struct net_device *dev)
-+{
-+ struct ltq_vrx200_priv *priv = netdev_priv(dev);
-+ int i;
-+ int err;
-+
-+ priv->mii_bus = mdiobus_alloc();
-+ if (!priv->mii_bus) {
-+ netdev_err(dev, "failed to allocate mii bus\n");
-+ err = -ENOMEM;
-+ goto err_out;
-+ }
-+
-+ priv->mii_bus->priv = dev;
-+ priv->mii_bus->read = ltq_vrx200_mdio_rd;
-+ priv->mii_bus->write = ltq_vrx200_mdio_wr;
-+ priv->mii_bus->name = "ltq_mii";
-+ snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
-+ priv->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
-+ if (!priv->mii_bus->irq) {
-+ err = -ENOMEM;
-+ goto err_out_free_mdiobus;
-+ }
-+
-+ for (i = 0; i < PHY_MAX_ADDR; ++i)
-+ priv->mii_bus->irq[i] = PHY_POLL;
-+
-+ if (mdiobus_register(priv->mii_bus)) {
-+ err = -ENXIO;
-+ goto err_out_free_mdio_irq;
-+ }
-+
-+ if (ltq_vrx200_mdio_probe(dev)) {
-+ err = -ENXIO;
-+ goto err_out_unregister_bus;
-+ }
-+ return 0;
-+
-+err_out_unregister_bus:
-+ mdiobus_unregister(priv->mii_bus);
-+err_out_free_mdio_irq:
-+ kfree(priv->mii_bus->irq);
-+err_out_free_mdiobus:
-+ mdiobus_free(priv->mii_bus);
-+err_out:
-+ return err;
-+}
-+
-+static void
-+ltq_vrx200_mdio_cleanup(struct net_device *dev)
-+{
-+ struct ltq_vrx200_priv *priv = netdev_priv(dev);
-+
-+ phy_disconnect(priv->phydev);
-+ mdiobus_unregister(priv->mii_bus);
-+ kfree(priv->mii_bus->irq);
-+ mdiobus_free(priv->mii_bus);
-+}
-+
-+void phy_dump(struct net_device *dev)
-+{
-+ struct ltq_vrx200_priv *priv = netdev_priv(dev);
-+ int i;
-+ for (i = 0; i < 0x1F; i++) {
-+ unsigned int val = ltq_vrx200_mdio_rd(priv->mii_bus, 0, i);
-+ printk("%d %4X\n", i, val);
-+ }
-+}
-+
-+static int
-+ltq_vrx200_open(struct net_device *dev)
-+{
-+ struct ltq_vrx200_priv *priv = netdev_priv(dev);
-+ int i;
-+ unsigned long flags;
-+
-+ for (i = 0; i < MAX_DMA_CHAN; i++) {
-+ struct ltq_vrx200_chan *ch = &priv->ch[i];
-+
-+ if (!IS_TX(i) && (!IS_RX(i)))
-+ continue;
-+ napi_enable(&ch->napi);
-+ spin_lock_irqsave(&priv->lock, flags);
-+ ltq_dma_open(&ch->dma);
-+ spin_unlock_irqrestore(&priv->lock, flags);
-+ }
-+ if (priv->phydev) {
-+ phy_start(priv->phydev);
-+ phy_dump(dev);
-+ }
-+ netif_tx_start_all_queues(dev);
-+ return 0;
-+}
-+
-+static int
-+ltq_vrx200_stop(struct net_device *dev)
-+{
-+ struct ltq_vrx200_priv *priv = netdev_priv(dev);
-+ int i;
-+ unsigned long flags;
-+
-+ netif_tx_stop_all_queues(dev);
-+ if (priv->phydev)
-+ phy_stop(priv->phydev);
-+ for (i = 0; i < MAX_DMA_CHAN; i++) {
-+ struct ltq_vrx200_chan *ch = &priv->ch[i];
-+
-+ if (!IS_RX(i) && !IS_TX(i))
-+ continue;
-+ napi_disable(&ch->napi);
-+ spin_lock_irqsave(&priv->lock, flags);
-+ ltq_dma_close(&ch->dma);
-+ spin_unlock_irqrestore(&priv->lock, flags);
-+ }
-+ return 0;
-+}
-+
-+static int
-+ltq_vrx200_tx(struct sk_buff *skb, struct net_device *dev)
-+{
-+ int queue = skb_get_queue_mapping(skb);
-+ struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
-+ struct ltq_vrx200_priv *priv = netdev_priv(dev);
-+ struct ltq_vrx200_chan *ch = &priv->ch[(queue << 1) | 1];
-+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-+ unsigned long flags;
-+ u32 byte_offset;
-+ int len;
-+
-+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
-+
-+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
-+ netdev_err(dev, "tx ring full\n");
-+ netif_tx_stop_queue(txq);
-+ return NETDEV_TX_BUSY;
-+ }
-+
-+ /* dma needs to start on a 16 byte aligned address */
-+ byte_offset = CPHYSADDR(skb->data) % 16;
-+ ch->skb[ch->dma.desc] = skb;
-+
-+ dev->trans_start = jiffies;
-+
-+ spin_lock_irqsave(&priv->lock, flags);
-+ desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len,
-+ DMA_TO_DEVICE)) - byte_offset;
-+ wmb();
-+ desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
-+ LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
-+ ch->dma.desc++;
-+ ch->dma.desc %= LTQ_DESC_NUM;
-+ spin_unlock_irqrestore(&priv->lock, flags);
-+
-+ if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
-+ netif_tx_stop_queue(txq);
-+
-+ return NETDEV_TX_OK;
-+}
-+
-+static int
-+ltq_vrx200_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-+{
-+ struct ltq_vrx200_priv *priv = netdev_priv(dev);
-+
-+ /* TODO: mii-toll reports "No MII transceiver present!." ?!*/
-+ return phy_mii_ioctl(priv->phydev, rq, cmd);
-+}
-+
-+static u16
-+ltq_vrx200_select_queue(struct net_device *dev, struct sk_buff *skb)
-+{
-+ /* we are currently only using the first queue */
-+ return 0;
-+}
-+
-+static int
-+ltq_vrx200_init(struct net_device *dev)
-+{
-+ struct ltq_vrx200_priv *priv = netdev_priv(dev);
-+ struct sockaddr mac;
-+ int err;
-+
-+ ether_setup(dev);
-+ dev->watchdog_timeo = 10 * HZ;
-+
-+ err = ltq_vrx200_hw_init(dev);
-+ if (err)
-+ goto err_hw;
-+
-+ memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
-+ if (!is_valid_ether_addr(mac.sa_data)) {
-+ pr_warn("vrx200: invalid MAC, using random\n");
-+ random_ether_addr(mac.sa_data);
-+ }
-+ eth_mac_addr(dev, &mac);
-+
-+ if (!ltq_vrx200_mdio_init(dev))
-+ dev->ethtool_ops = <q_vrx200_ethtool_ops;
-+ else
-+ pr_warn("vrx200: mdio probe failed\n");;
-+ return 0;
-+
-+err_hw:
-+ ltq_vrx200_hw_exit(dev);
-+ return err;
-+}
-+
-+static void
-+ltq_vrx200_tx_timeout(struct net_device *dev)
-+{
-+ int err;
-+
-+ ltq_vrx200_hw_exit(dev);
-+ err = ltq_vrx200_hw_init(dev);
-+ if (err)
-+ goto err_hw;
-+ dev->trans_start = jiffies;
-+ netif_wake_queue(dev);
-+ return;
-+
-+err_hw:
-+ ltq_vrx200_hw_exit(dev);
-+ netdev_err(dev, "failed to restart vrx200 after TX timeout\n");
-+}
-+
-+static const struct net_device_ops ltq_eth_netdev_ops = {
-+ .ndo_open = ltq_vrx200_open,
-+ .ndo_stop = ltq_vrx200_stop,
-+ .ndo_start_xmit = ltq_vrx200_tx,
-+ .ndo_change_mtu = eth_change_mtu,
-+ .ndo_do_ioctl = ltq_vrx200_ioctl,
-+ .ndo_set_mac_address = eth_mac_addr,
-+ .ndo_validate_addr = eth_validate_addr,
-+ .ndo_select_queue = ltq_vrx200_select_queue,
-+ .ndo_init = ltq_vrx200_init,
-+ .ndo_tx_timeout = ltq_vrx200_tx_timeout,
-+};
-+
-+static int __devinit
-+ltq_vrx200_probe(struct platform_device *pdev)
-+{
-+ struct net_device *dev;
-+ struct ltq_vrx200_priv *priv;
-+ struct resource *res;
-+ int err;
-+ int i;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res) {
-+ dev_err(&pdev->dev, "failed to get vrx200 resource\n");
-+ err = -ENOENT;
-+ goto err_out;
-+ }
-+
-+ res = devm_request_mem_region(&pdev->dev, res->start,
-+ resource_size(res), dev_name(&pdev->dev));
-+ if (!res) {
-+ dev_err(&pdev->dev, "failed to request vrx200 resource\n");
-+ err = -EBUSY;
-+ goto err_out;
-+ }
-+
-+ ltq_vrx200_membase = devm_ioremap_nocache(&pdev->dev,
-+ res->start, resource_size(res));
-+ if (!ltq_vrx200_membase) {
-+ dev_err(&pdev->dev, "failed to remap vrx200 engine %d\n",
-+ pdev->id);
-+ err = -ENOMEM;
-+ goto err_out;
-+ }
-+
-+ if (ltq_gpio_request(&pdev->dev, 42, 2, 1, "MDIO") ||
-+ ltq_gpio_request(&pdev->dev, 43, 2, 1, "MDC")) {
-+ dev_err(&pdev->dev, "failed to request MDIO gpios\n");
-+ err = -EBUSY;
-+ goto err_out;
-+ }
-+
-+ dev = alloc_etherdev_mq(sizeof(struct ltq_vrx200_priv), 4);
-+ strcpy(dev->name, "eth%d");
-+ dev->netdev_ops = <q_eth_netdev_ops;
-+ priv = netdev_priv(dev);
-+ priv->res = res;
-+ priv->pldata = dev_get_platdata(&pdev->dev);
-+ priv->netdev = dev;
-+
-+ priv->clk_ppe = clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(priv->clk_ppe))
-+ return PTR_ERR(priv->clk_ppe);
-+
-+ spin_lock_init(&priv->lock);
-+
-+ for (i = 0; i < MAX_DMA_CHAN; i++) {
-+ if (IS_TX(i))
-+ netif_napi_add(dev, &priv->ch[i].napi,
-+ ltq_vrx200_poll_tx, 8);
-+ else if (IS_RX(i))
-+ netif_napi_add(dev, &priv->ch[i].napi,
-+ ltq_vrx200_poll_rx, 32);
-+ priv->ch[i].netdev = dev;
-+ }
-+
-+ err = register_netdev(dev);
-+ if (err)
-+ goto err_free;
-+
-+ platform_set_drvdata(pdev, dev);
-+ return 0;
-+
-+err_free:
-+ kfree(dev);
-+err_out:
-+ return err;
-+}
-+
-+static int __devexit
-+ltq_vrx200_remove(struct platform_device *pdev)
-+{
-+ struct net_device *dev = platform_get_drvdata(pdev);
-+
-+ if (dev) {
-+ netif_tx_stop_all_queues(dev);
-+ ltq_vrx200_hw_exit(dev);
-+ ltq_vrx200_mdio_cleanup(dev);
-+ unregister_netdev(dev);
-+ }
-+ return 0;
-+}
-+
-+static struct platform_driver ltq_mii_driver = {
-+ .probe = ltq_vrx200_probe,
-+ .remove = __devexit_p(ltq_vrx200_remove),
-+ .driver = {
-+ .name = "ltq_vrx200",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+module_platform_driver(ltq_mii_driver);
-+
-+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-+MODULE_DESCRIPTION("Lantiq SoC ETOP");
-+MODULE_LICENSE("GPL");
+++ /dev/null
-From 06663beb0230c02d1962eca8d9f6709c2e852328 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 21 Mar 2012 18:14:06 +0100
-Subject: [PATCH 44/70] MIPS: NET: several fixes to etop driver
-
----
- drivers/net/ethernet/lantiq_etop.c | 208 +++++++++++++++++++-----------------
- 1 files changed, 108 insertions(+), 100 deletions(-)
-
---- a/drivers/net/ethernet/lantiq_etop.c
-+++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -103,15 +103,6 @@
- /* the newer xway socks have a embedded 3/7 port gbit multiplexer */
- #define ltq_has_gbit() (ltq_is_ar9() || ltq_is_vr9())
-
--/* use 2 static channels for TX/RX
-- depending on the SoC we need to use different DMA channels for ethernet */
--#define LTQ_ETOP_TX_CHANNEL 1
--#define LTQ_ETOP_RX_CHANNEL ((ltq_is_ase()) ? (5) : \
-- ((ltq_has_gbit()) ? (0) : (6)))
--
--#define IS_TX(x) (x == LTQ_ETOP_TX_CHANNEL)
--#define IS_RX(x) (x == LTQ_ETOP_RX_CHANNEL)
--
- #define ltq_etop_r32(x) ltq_r32(ltq_etop_membase + (x))
- #define ltq_etop_w32(x, y) ltq_w32(x, ltq_etop_membase + (y))
- #define ltq_etop_w32_mask(x, y, z) \
-@@ -128,8 +119,8 @@ static void __iomem *ltq_etop_membase;
- static void __iomem *ltq_gbit_membase;
-
- struct ltq_etop_chan {
-- int idx;
- int tx_free;
-+ int irq;
- struct net_device *netdev;
- struct napi_struct napi;
- struct ltq_dma_channel dma;
-@@ -144,8 +135,8 @@ struct ltq_etop_priv {
- struct mii_bus *mii_bus;
- struct phy_device *phydev;
-
-- struct ltq_etop_chan ch[MAX_DMA_CHAN];
-- int tx_free[MAX_DMA_CHAN >> 1];
-+ struct ltq_etop_chan txch;
-+ struct ltq_etop_chan rxch;
-
- spinlock_t lock;
-
-@@ -206,8 +197,10 @@ ltq_etop_poll_rx(struct napi_struct *nap
- {
- struct ltq_etop_chan *ch = container_of(napi,
- struct ltq_etop_chan, napi);
-+ struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
- int rx = 0;
- int complete = 0;
-+ unsigned long flags;
-
- while ((rx < budget) && !complete) {
- struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-@@ -221,7 +214,9 @@ ltq_etop_poll_rx(struct napi_struct *nap
- }
- if (complete || !rx) {
- napi_complete(&ch->napi);
-+ spin_lock_irqsave(&priv->lock, flags);
- ltq_dma_ack_irq(&ch->dma);
-+ spin_unlock_irqrestore(&priv->lock, flags);
- }
- return rx;
- }
-@@ -233,7 +228,7 @@ ltq_etop_poll_tx(struct napi_struct *nap
- container_of(napi, struct ltq_etop_chan, napi);
- struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
- struct netdev_queue *txq =
-- netdev_get_tx_queue(ch->netdev, ch->idx >> 1);
-+ netdev_get_tx_queue(ch->netdev, ch->dma.nr >> 1);
- unsigned long flags;
-
- spin_lock_irqsave(&priv->lock, flags);
-@@ -251,7 +246,9 @@ ltq_etop_poll_tx(struct napi_struct *nap
- if (netif_tx_queue_stopped(txq))
- netif_tx_start_queue(txq);
- napi_complete(&ch->napi);
-+ spin_lock_irqsave(&priv->lock, flags);
- ltq_dma_ack_irq(&ch->dma);
-+ spin_unlock_irqrestore(&priv->lock, flags);
- return 1;
- }
-
-@@ -259,9 +256,10 @@ static irqreturn_t
- ltq_etop_dma_irq(int irq, void *_priv)
- {
- struct ltq_etop_priv *priv = _priv;
-- int ch = irq - LTQ_DMA_ETOP;
--
-- napi_schedule(&priv->ch[ch].napi);
-+ if (irq == priv->txch.dma.irq)
-+ napi_schedule(&priv->txch.napi);
-+ else
-+ napi_schedule(&priv->rxch.napi);
- return IRQ_HANDLED;
- }
-
-@@ -273,7 +271,7 @@ ltq_etop_free_channel(struct net_device
- ltq_dma_free(&ch->dma);
- if (ch->dma.irq)
- free_irq(ch->dma.irq, priv);
-- if (IS_RX(ch->idx)) {
-+ if (ch == &priv->txch) {
- int desc;
- for (desc = 0; desc < LTQ_DESC_NUM; desc++)
- dev_kfree_skb_any(ch->skb[ch->dma.desc]);
-@@ -284,7 +282,6 @@ static void
- ltq_etop_hw_exit(struct net_device *dev)
- {
- struct ltq_etop_priv *priv = netdev_priv(dev);
-- int i;
-
- clk_disable(priv->clk_ppe);
-
-@@ -296,9 +293,8 @@ ltq_etop_hw_exit(struct net_device *dev)
- clk_disable(priv->clk_ephycgu);
- }
-
-- for (i = 0; i < MAX_DMA_CHAN; i++)
-- if (IS_TX(i) || IS_RX(i))
-- ltq_etop_free_channel(dev, &priv->ch[i]);
-+ ltq_etop_free_channel(dev, &priv->txch);
-+ ltq_etop_free_channel(dev, &priv->rxch);
- }
-
- static void
-@@ -326,8 +322,6 @@ ltq_etop_hw_init(struct net_device *dev)
- {
- struct ltq_etop_priv *priv = netdev_priv(dev);
- unsigned int mii_mode = priv->pldata->mii_mode;
-- int err = 0;
-- int i;
-
- clk_enable(priv->clk_ppe);
-
-@@ -369,31 +363,50 @@ ltq_etop_hw_init(struct net_device *dev)
- /* enable crc generation */
- ltq_etop_w32(PPE32_CGEN, LQ_PPE32_ENET_MAC_CFG);
-
-+ return 0;
-+}
-+
-+static int
-+ltq_etop_dma_init(struct net_device *dev)
-+{
-+ struct ltq_etop_priv *priv = netdev_priv(dev);
-+ int tx = 1;
-+ int rx = ((ltq_is_ase()) ? (5) : \
-+ ((ltq_is_ar9()) ? (0) : (6)));
-+ int tx_irq = LTQ_DMA_ETOP + tx;
-+ int rx_irq = LTQ_DMA_ETOP + rx;
-+ int err;
-+
- ltq_dma_init_port(DMA_PORT_ETOP);
-
-- for (i = 0; i < MAX_DMA_CHAN && !err; i++) {
-- int irq = LTQ_DMA_ETOP + i;
-- struct ltq_etop_chan *ch = &priv->ch[i];
--
-- ch->idx = ch->dma.nr = i;
--
-- if (IS_TX(i)) {
-- ltq_dma_alloc_tx(&ch->dma);
-- err = request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
-- "etop_tx", priv);
-- } else if (IS_RX(i)) {
-- ltq_dma_alloc_rx(&ch->dma);
-- for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
-- ch->dma.desc++)
-- if (ltq_etop_alloc_skb(ch))
-- err = -ENOMEM;
-- ch->dma.desc = 0;
-- err = request_irq(irq, ltq_etop_dma_irq, IRQF_DISABLED,
-- "etop_rx", priv);
-+ priv->txch.dma.nr = tx;
-+ ltq_dma_alloc_tx(&priv->txch.dma);
-+ err = request_irq(tx_irq, ltq_etop_dma_irq, IRQF_DISABLED,
-+ "eth_tx", priv);
-+ if (err) {
-+ netdev_err(dev, "failed to allocate tx irq\n");
-+ goto err_out;
-+ }
-+ priv->txch.dma.irq = tx_irq;
-+
-+ priv->rxch.dma.nr = rx;
-+ ltq_dma_alloc_rx(&priv->rxch.dma);
-+ for (priv->rxch.dma.desc = 0; priv->rxch.dma.desc < LTQ_DESC_NUM;
-+ priv->rxch.dma.desc++) {
-+ if (ltq_etop_alloc_skb(&priv->rxch)) {
-+ netdev_err(dev, "failed to allocate skbs\n");
-+ err = -ENOMEM;
-+ goto err_out;
- }
-- if (!err)
-- ch->dma.irq = irq;
- }
-+ priv->rxch.dma.desc = 0;
-+ err = request_irq(rx_irq, ltq_etop_dma_irq, IRQF_DISABLED,
-+ "eth_rx", priv);
-+ if (err)
-+ netdev_err(dev, "failed to allocate rx irq\n");
-+ else
-+ priv->rxch.dma.irq = rx_irq;
-+err_out:
- return err;
- }
-
-@@ -410,7 +423,10 @@ ltq_etop_get_settings(struct net_device
- {
- struct ltq_etop_priv *priv = netdev_priv(dev);
-
-- return phy_ethtool_gset(priv->phydev, cmd);
-+ if (priv->phydev)
-+ return phy_ethtool_gset(priv->phydev, cmd);
-+ else
-+ return 0;
- }
-
- static int
-@@ -418,7 +434,10 @@ ltq_etop_set_settings(struct net_device
- {
- struct ltq_etop_priv *priv = netdev_priv(dev);
-
-- return phy_ethtool_sset(priv->phydev, cmd);
-+ if (priv->phydev)
-+ return phy_ethtool_sset(priv->phydev, cmd);
-+ else
-+ return 0;
- }
-
- static int
-@@ -426,7 +445,10 @@ ltq_etop_nway_reset(struct net_device *d
- {
- struct ltq_etop_priv *priv = netdev_priv(dev);
-
-- return phy_start_aneg(priv->phydev);
-+ if (priv->phydev)
-+ return phy_start_aneg(priv->phydev);
-+ else
-+ return 0;
- }
-
- static const struct ethtool_ops ltq_etop_ethtool_ops = {
-@@ -618,18 +640,19 @@ static int
- ltq_etop_open(struct net_device *dev)
- {
- struct ltq_etop_priv *priv = netdev_priv(dev);
-- int i;
-+ unsigned long flags;
-
-- for (i = 0; i < MAX_DMA_CHAN; i++) {
-- struct ltq_etop_chan *ch = &priv->ch[i];
-+ napi_enable(&priv->txch.napi);
-+ napi_enable(&priv->rxch.napi);
-+
-+ spin_lock_irqsave(&priv->lock, flags);
-+ ltq_dma_open(&priv->txch.dma);
-+ ltq_dma_open(&priv->rxch.dma);
-+ spin_unlock_irqrestore(&priv->lock, flags);
-
-- if (!IS_TX(i) && (!IS_RX(i)))
-- continue;
-- ltq_dma_open(&ch->dma);
-- napi_enable(&ch->napi);
-- }
- if (priv->phydev)
- phy_start(priv->phydev);
-+
- netif_tx_start_all_queues(dev);
- return 0;
- }
-@@ -638,19 +661,19 @@ static int
- ltq_etop_stop(struct net_device *dev)
- {
- struct ltq_etop_priv *priv = netdev_priv(dev);
-- int i;
-+ unsigned long flags;
-
- netif_tx_stop_all_queues(dev);
- if (priv->phydev)
- phy_stop(priv->phydev);
-- for (i = 0; i < MAX_DMA_CHAN; i++) {
-- struct ltq_etop_chan *ch = &priv->ch[i];
-+ napi_disable(&priv->txch.napi);
-+ napi_disable(&priv->rxch.napi);
-+
-+ spin_lock_irqsave(&priv->lock, flags);
-+ ltq_dma_close(&priv->txch.dma);
-+ ltq_dma_close(&priv->rxch.dma);
-+ spin_unlock_irqrestore(&priv->lock, flags);
-
-- if (!IS_RX(i) && !IS_TX(i))
-- continue;
-- napi_disable(&ch->napi);
-- ltq_dma_close(&ch->dma);
-- }
- return 0;
- }
-
-@@ -660,16 +683,16 @@ ltq_etop_tx(struct sk_buff *skb, struct
- int queue = skb_get_queue_mapping(skb);
- struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
- struct ltq_etop_priv *priv = netdev_priv(dev);
-- struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1];
-- struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-+ struct ltq_dma_desc *desc =
-+ &priv->txch.dma.desc_base[priv->txch.dma.desc];
- unsigned long flags;
- u32 byte_offset;
- int len;
-
- len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
-
-- if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
-- dev_kfree_skb_any(skb);
-+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) ||
-+ priv->txch.skb[priv->txch.dma.desc]) {
- netdev_err(dev, "tx ring full\n");
- netif_tx_stop_queue(txq);
- return NETDEV_TX_BUSY;
-@@ -677,7 +700,7 @@ ltq_etop_tx(struct sk_buff *skb, struct
-
- /* dma needs to start on a 16 byte aligned address */
- byte_offset = CPHYSADDR(skb->data) % 16;
-- ch->skb[ch->dma.desc] = skb;
-+ priv->txch.skb[priv->txch.dma.desc] = skb;
-
- dev->trans_start = jiffies;
-
-@@ -687,11 +710,11 @@ ltq_etop_tx(struct sk_buff *skb, struct
- wmb();
- desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
- LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
-- ch->dma.desc++;
-- ch->dma.desc %= LTQ_DESC_NUM;
-+ priv->txch.dma.desc++;
-+ priv->txch.dma.desc %= LTQ_DESC_NUM;
- spin_unlock_irqrestore(&priv->lock, flags);
-
-- if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
-+ if (priv->txch.dma.desc_base[priv->txch.dma.desc].ctl & LTQ_DMA_OWN)
- netif_tx_stop_queue(txq);
-
- return NETDEV_TX_OK;
-@@ -776,6 +799,10 @@ ltq_etop_init(struct net_device *dev)
- err = ltq_etop_hw_init(dev);
- if (err)
- goto err_hw;
-+ err = ltq_etop_dma_init(dev);
-+ if (err)
-+ goto err_hw;
-+
- ltq_etop_change_mtu(dev, 1500);
-
- memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
-@@ -811,6 +838,9 @@ ltq_etop_tx_timeout(struct net_device *d
- err = ltq_etop_hw_init(dev);
- if (err)
- goto err_hw;
-+ err = ltq_etop_dma_init(dev);
-+ if (err)
-+ goto err_hw;
- dev->trans_start = jiffies;
- netif_wake_queue(dev);
- return;
-@@ -834,14 +864,13 @@ static const struct net_device_ops ltq_e
- .ndo_tx_timeout = ltq_etop_tx_timeout,
- };
-
--static int __init
-+static int __devinit
- ltq_etop_probe(struct platform_device *pdev)
- {
- struct net_device *dev;
- struct ltq_etop_priv *priv;
- struct resource *res, *gbit_res;
- int err;
-- int i;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
-@@ -917,15 +946,10 @@ ltq_etop_probe(struct platform_device *p
-
- spin_lock_init(&priv->lock);
-
-- for (i = 0; i < MAX_DMA_CHAN; i++) {
-- if (IS_TX(i))
-- netif_napi_add(dev, &priv->ch[i].napi,
-- ltq_etop_poll_tx, 8);
-- else if (IS_RX(i))
-- netif_napi_add(dev, &priv->ch[i].napi,
-- ltq_etop_poll_rx, 32);
-- priv->ch[i].netdev = dev;
-- }
-+ netif_napi_add(dev, &priv->txch.napi, ltq_etop_poll_tx, 8);
-+ netif_napi_add(dev, &priv->rxch.napi, ltq_etop_poll_rx, 32);
-+ priv->txch.netdev = dev;
-+ priv->rxch.netdev = dev;
-
- err = register_netdev(dev);
- if (err)
-@@ -955,6 +979,7 @@ ltq_etop_remove(struct platform_device *
- }
-
- static struct platform_driver ltq_mii_driver = {
-+ .probe = ltq_etop_probe,
- .remove = __devexit_p(ltq_etop_remove),
- .driver = {
- .name = "ltq_etop",
-@@ -962,24 +987,7 @@ static struct platform_driver ltq_mii_dr
- },
- };
-
--int __init
--init_ltq_etop(void)
--{
-- int ret = platform_driver_probe(<q_mii_driver, ltq_etop_probe);
--
-- if (ret)
-- pr_err("ltq_etop: Error registering platfom driver!");
-- return ret;
--}
--
--static void __exit
--exit_ltq_etop(void)
--{
-- platform_driver_unregister(<q_mii_driver);
--}
--
--module_init(init_ltq_etop);
--module_exit(exit_ltq_etop);
-+module_platform_driver(ltq_mii_driver);
-
- MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
- MODULE_DESCRIPTION("Lantiq SoC ETOP");
--- /dev/null
+From 8757ae55b11c87d75078b44384b27aadc52f2f22 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 20 Feb 2012 12:15:25 +0100
+Subject: [PATCH 44/73] MTD: MIPS: lantiq: use module_platform_driver inside
+ lantiq map driver
+
+Reduce boilerplate code by converting driver to module_platform_driver.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: linux-mtd@lists.infradead.org
+---
+ drivers/mtd/maps/lantiq-flash.c | 22 +++-------------------
+ 1 files changed, 3 insertions(+), 19 deletions(-)
+
+diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
+index 764d468..b55212c 100644
+--- a/drivers/mtd/maps/lantiq-flash.c
++++ b/drivers/mtd/maps/lantiq-flash.c
+@@ -108,7 +108,7 @@ ltq_copy_to(struct map_info *map, unsigned long to,
+ spin_unlock_irqrestore(&ebu_lock, flags);
+ }
+
+-static int __init
++static int __devinit
+ ltq_mtd_probe(struct platform_device *pdev)
+ {
+ struct physmap_flash_data *ltq_mtd_data = dev_get_platdata(&pdev->dev);
+@@ -208,6 +208,7 @@ ltq_mtd_remove(struct platform_device *pdev)
+ }
+
+ static struct platform_driver ltq_mtd_driver = {
++ .probe = ltq_mtd_probe,
+ .remove = __devexit_p(ltq_mtd_remove),
+ .driver = {
+ .name = "ltq_nor",
+@@ -215,24 +216,7 @@ static struct platform_driver ltq_mtd_driver = {
+ },
+ };
+
+-static int __init
+-init_ltq_mtd(void)
+-{
+- int ret = platform_driver_probe(<q_mtd_driver, ltq_mtd_probe);
+-
+- if (ret)
+- pr_err("ltq_nor: error registering platform driver");
+- return ret;
+-}
+-
+-static void __exit
+-exit_ltq_mtd(void)
+-{
+- platform_driver_unregister(<q_mtd_driver);
+-}
+-
+-module_init(init_ltq_mtd);
+-module_exit(exit_ltq_mtd);
++module_platform_driver(ltq_mtd_driver);
+
+ MODULE_LICENSE("GPL");
+ MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+--
+1.7.9.1
+
+++ /dev/null
-From f94454615da63008ac865e6a7b03bbe79041e8c2 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 20 Feb 2012 12:15:25 +0100
-Subject: [PATCH 45/70] MTD: MIPS: lantiq: use module_platform_driver inside
- lantiq map driver
-
-Reduce boilerplate code by converting driver to module_platform_driver.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: linux-mtd@lists.infradead.org
----
- drivers/mtd/maps/lantiq-flash.c | 22 +++-------------------
- 1 files changed, 3 insertions(+), 19 deletions(-)
-
---- a/drivers/mtd/maps/lantiq-flash.c
-+++ b/drivers/mtd/maps/lantiq-flash.c
-@@ -108,7 +108,7 @@ ltq_copy_to(struct map_info *map, unsign
- spin_unlock_irqrestore(&ebu_lock, flags);
- }
-
--static int __init
-+static int __devinit
- ltq_mtd_probe(struct platform_device *pdev)
- {
- struct physmap_flash_data *ltq_mtd_data = dev_get_platdata(&pdev->dev);
-@@ -208,6 +208,7 @@ ltq_mtd_remove(struct platform_device *p
- }
-
- static struct platform_driver ltq_mtd_driver = {
-+ .probe = ltq_mtd_probe,
- .remove = __devexit_p(ltq_mtd_remove),
- .driver = {
- .name = "ltq_nor",
-@@ -215,24 +216,7 @@ static struct platform_driver ltq_mtd_dr
- },
- };
-
--static int __init
--init_ltq_mtd(void)
--{
-- int ret = platform_driver_probe(<q_mtd_driver, ltq_mtd_probe);
--
-- if (ret)
-- pr_err("ltq_nor: error registering platform driver");
-- return ret;
--}
--
--static void __exit
--exit_ltq_mtd(void)
--{
-- platform_driver_unregister(<q_mtd_driver);
--}
--
--module_init(init_ltq_mtd);
--module_exit(exit_ltq_mtd);
-+module_platform_driver(ltq_mtd_driver);
-
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
--- /dev/null
+From 3b8b06b76d01136fa4e195a10c5ee12b2352616e Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 20 Feb 2012 12:16:31 +0100
+Subject: [PATCH 45/73] WDT: MIPS: lantiq: use module_platform_driver inside
+ lantiq watchdog driver
+
+Reduce boilerplate code by converting driver to module_platform_driver.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Cc: linux-watchdog@vger.kernel.org
+---
+ drivers/watchdog/lantiq_wdt.c | 19 +++----------------
+ 1 files changed, 3 insertions(+), 16 deletions(-)
+
+diff --git a/drivers/watchdog/lantiq_wdt.c b/drivers/watchdog/lantiq_wdt.c
+index da2b09f..40c9eb7 100644
+--- a/drivers/watchdog/lantiq_wdt.c
++++ b/drivers/watchdog/lantiq_wdt.c
+@@ -182,7 +182,7 @@ static struct miscdevice ltq_wdt_miscdev = {
+ .fops = <q_wdt_fops,
+ };
+
+-static int __init
++static int __devinit
+ ltq_wdt_probe(struct platform_device *pdev)
+ {
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+@@ -230,6 +230,7 @@ ltq_wdt_remove(struct platform_device *pdev)
+
+
+ static struct platform_driver ltq_wdt_driver = {
++ .probe = ltq_wdt_probe,
+ .remove = __devexit_p(ltq_wdt_remove),
+ .driver = {
+ .name = "ltq_wdt",
+@@ -237,21 +238,7 @@ static struct platform_driver ltq_wdt_driver = {
+ },
+ };
+
+-static int __init
+-init_ltq_wdt(void)
+-{
+- return platform_driver_probe(<q_wdt_driver, ltq_wdt_probe);
+-}
+-
+-static void __exit
+-exit_ltq_wdt(void)
+-{
+- return platform_driver_unregister(<q_wdt_driver);
+-}
+-
+-module_init(init_ltq_wdt);
+-module_exit(exit_ltq_wdt);
+-
++module_platform_driver(ltq_wdt_driver);
+ module_param(nowayout, int, 0);
+ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
+
+--
+1.7.9.1
+
--- /dev/null
+From 688c075ddc08723848df01fc0426d69d0b3a464b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 29 Sep 2011 17:16:38 +0200
+Subject: [PATCH 46/73] MIPS: lantiq: adds GPTU driver
+
+---
+ arch/mips/include/asm/mach-lantiq/lantiq_timer.h | 155 ++++
+ arch/mips/lantiq/xway/Makefile | 2 +-
+ arch/mips/lantiq/xway/sysctrl.c | 1 +
+ arch/mips/lantiq/xway/timer.c | 846 ++++++++++++++++++++++
+ 4 files changed, 1003 insertions(+), 1 deletions(-)
+ create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_timer.h
+ create mode 100644 arch/mips/lantiq/xway/timer.c
+
+diff --git a/arch/mips/include/asm/mach-lantiq/lantiq_timer.h b/arch/mips/include/asm/mach-lantiq/lantiq_timer.h
+new file mode 100644
+index 0000000..ef564ab
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/lantiq_timer.h
+@@ -0,0 +1,155 @@
++#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
++#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
++
++
++/******************************************************************************
++ Copyright (c) 2002, Infineon Technologies. All rights reserved.
++
++ No Warranty
++ Because the program is licensed free of charge, there is no warranty for
++ the program, to the extent permitted by applicable law. Except when
++ otherwise stated in writing the copyright holders and/or other parties
++ provide the program "as is" without warranty of any kind, either
++ expressed or implied, including, but not limited to, the implied
++ warranties of merchantability and fitness for a particular purpose. The
++ entire risk as to the quality and performance of the program is with
++ you. should the program prove defective, you assume the cost of all
++ necessary servicing, repair or correction.
++
++ In no event unless required by applicable law or agreed to in writing
++ will any copyright holder, or any other party who may modify and/or
++ redistribute the program as permitted above, be liable to you for
++ damages, including any general, special, incidental or consequential
++ damages arising out of the use or inability to use the program
++ (including but not limited to loss of data or data being rendered
++ inaccurate or losses sustained by you or third parties or a failure of
++ the program to operate with any other programs), even if such holder or
++ other party has been advised of the possibility of such damages.
++******************************************************************************/
++
++
++/*
++ * ####################################
++ * Definition
++ * ####################################
++ */
++
++/*
++ * Available Timer/Counter Index
++ */
++#define TIMER(n, X) (n * 2 + (X ? 1 : 0))
++#define TIMER_ANY 0x00
++#define TIMER1A TIMER(1, 0)
++#define TIMER1B TIMER(1, 1)
++#define TIMER2A TIMER(2, 0)
++#define TIMER2B TIMER(2, 1)
++#define TIMER3A TIMER(3, 0)
++#define TIMER3B TIMER(3, 1)
++
++/*
++ * Flag of Timer/Counter
++ * These flags specify the way in which timer is configured.
++ */
++/* Bit size of timer/counter. */
++#define TIMER_FLAG_16BIT 0x0000
++#define TIMER_FLAG_32BIT 0x0001
++/* Switch between timer and counter. */
++#define TIMER_FLAG_TIMER 0x0000
++#define TIMER_FLAG_COUNTER 0x0002
++/* Stop or continue when overflowing/underflowing. */
++#define TIMER_FLAG_ONCE 0x0000
++#define TIMER_FLAG_CYCLIC 0x0004
++/* Count up or counter down. */
++#define TIMER_FLAG_UP 0x0000
++#define TIMER_FLAG_DOWN 0x0008
++/* Count on specific level or edge. */
++#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000
++#define TIMER_FLAG_LOW_LEVEL_SENSITIVE 0x0040
++#define TIMER_FLAG_RISE_EDGE 0x0010
++#define TIMER_FLAG_FALL_EDGE 0x0020
++#define TIMER_FLAG_ANY_EDGE 0x0030
++/* Signal is syncronous to module clock or not. */
++#define TIMER_FLAG_UNSYNC 0x0000
++#define TIMER_FLAG_SYNC 0x0080
++/* Different interrupt handle type. */
++#define TIMER_FLAG_NO_HANDLE 0x0000
++#if defined(__KERNEL__)
++ #define TIMER_FLAG_CALLBACK_IN_IRQ 0x0100
++#endif // defined(__KERNEL__)
++#define TIMER_FLAG_SIGNAL 0x0300
++/* Internal clock source or external clock source */
++#define TIMER_FLAG_INT_SRC 0x0000
++#define TIMER_FLAG_EXT_SRC 0x1000
++
++
++/*
++ * ioctl Command
++ */
++#define GPTU_REQUEST_TIMER 0x01 /* General method to setup timer/counter. */
++#define GPTU_FREE_TIMER 0x02 /* Free timer/counter. */
++#define GPTU_START_TIMER 0x03 /* Start or resume timer/counter. */
++#define GPTU_STOP_TIMER 0x04 /* Suspend timer/counter. */
++#define GPTU_GET_COUNT_VALUE 0x05 /* Get current count value. */
++#define GPTU_CALCULATE_DIVIDER 0x06 /* Calculate timer divider from given freq.*/
++#define GPTU_SET_TIMER 0x07 /* Simplified method to setup timer. */
++#define GPTU_SET_COUNTER 0x08 /* Simplified method to setup counter. */
++
++/*
++ * Data Type Used to Call ioctl
++ */
++struct gptu_ioctl_param {
++ unsigned int timer; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and *
++ * GPTU_SET_COUNTER, this field is ID of expected *
++ * timer/counter. If it's zero, a timer/counter would *
++ * be dynamically allocated and ID would be stored in *
++ * this field. *
++ * In command GPTU_GET_COUNT_VALUE, this field is *
++ * ignored. *
++ * In other command, this field is ID of timer/counter *
++ * allocated. */
++ unsigned int flag; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and *
++ * GPTU_SET_COUNTER, this field contains flags to *
++ * specify how to configure timer/counter. *
++ * In command GPTU_START_TIMER, zero indicate start *
++ * and non-zero indicate resume timer/counter. *
++ * In other command, this field is ignored. */
++ unsigned long value; /* In command GPTU_REQUEST_TIMER, this field contains *
++ * init/reload value. *
++ * In command GPTU_SET_TIMER, this field contains *
++ * frequency (0.001Hz) of timer. *
++ * In command GPTU_GET_COUNT_VALUE, current count *
++ * value would be stored in this field. *
++ * In command GPTU_CALCULATE_DIVIDER, this field *
++ * contains frequency wanted, and after calculation, *
++ * divider would be stored in this field to overwrite *
++ * the frequency. *
++ * In other command, this field is ignored. */
++ int pid; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, *
++ * if signal is required, this field contains process *
++ * ID to which signal would be sent. *
++ * In other command, this field is ignored. */
++ int sig; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, *
++ * if signal is required, this field contains signal *
++ * number which would be sent. *
++ * In other command, this field is ignored. */
++};
++
++/*
++ * ####################################
++ * Data Type
++ * ####################################
++ */
++typedef void (*timer_callback)(unsigned long arg);
++
++extern int lq_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long);
++extern int lq_free_timer(unsigned int);
++extern int lq_start_timer(unsigned int, int);
++extern int lq_stop_timer(unsigned int);
++extern int lq_reset_counter_flags(u32 timer, u32 flags);
++extern int lq_get_count_value(unsigned int, unsigned long *);
++extern u32 lq_cal_divider(unsigned long);
++extern int lq_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long);
++extern int lq_set_counter(unsigned int timer, unsigned int flag,
++ u32 reload, unsigned long arg1, unsigned long arg2);
++
++#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */
+diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
+index 277aa34..4c3106f 100644
+--- a/arch/mips/lantiq/xway/Makefile
++++ b/arch/mips/lantiq/xway/Makefile
+@@ -1,4 +1,4 @@
+-obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o nand.o
++obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o nand.o timer.o
+
+ obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
+ obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+index 38f02f9..1a2e2d4 100644
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -147,6 +147,7 @@ void __init ltq_soc_init(void)
+ clkdev_add_pmu("ltq_dma", NULL, 0, PMU_DMA);
+ clkdev_add_pmu("ltq_stp", NULL, 0, PMU_STP);
+ clkdev_add_pmu("ltq_spi", NULL, 0, PMU_SPI);
++ clkdev_add_pmu("ltq_gptu", NULL, 0, PMU_GPT);
+ if (!ltq_is_vr9())
+ clkdev_add_pmu("ltq_etop", NULL, 0, PMU_PPE);
+ if (ltq_is_ase()) {
+diff --git a/arch/mips/lantiq/xway/timer.c b/arch/mips/lantiq/xway/timer.c
+new file mode 100644
+index 0000000..9794c87
+--- /dev/null
++++ b/arch/mips/lantiq/xway/timer.c
+@@ -0,0 +1,846 @@
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/version.h>
++#include <linux/types.h>
++#include <linux/fs.h>
++#include <linux/miscdevice.h>
++#include <linux/init.h>
++#include <linux/uaccess.h>
++#include <linux/unistd.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/sched.h>
++
++#include <asm/irq.h>
++#include <asm/div64.h>
++#include "../clk.h"
++
++#include <lantiq_soc.h>
++#include <lantiq_irq.h>
++#include <lantiq_timer.h>
++
++#define MAX_NUM_OF_32BIT_TIMER_BLOCKS 6
++
++#ifdef TIMER1A
++#define FIRST_TIMER TIMER1A
++#else
++#define FIRST_TIMER 2
++#endif
++
++/*
++ * GPTC divider is set or not.
++ */
++#define GPTU_CLC_RMC_IS_SET 0
++
++/*
++ * Timer Interrupt (IRQ)
++ */
++/* Must be adjusted when ICU driver is available */
++#define TIMER_INTERRUPT (INT_NUM_IM3_IRL0 + 22)
++
++/*
++ * Bits Operation
++ */
++#define GET_BITS(x, msb, lsb) \
++ (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
++#define SET_BITS(x, msb, lsb, value) \
++ (((x) & ~(((1 << ((msb) + 1)) - 1) ^ ((1 << (lsb)) - 1))) | \
++ (((value) & ((1 << (1 + (msb) - (lsb))) - 1)) << (lsb)))
++
++/*
++ * GPTU Register Mapping
++ */
++#define LQ_GPTU (KSEG1 + 0x1E100A00)
++#define LQ_GPTU_CLC ((volatile u32 *)(LQ_GPTU + 0x0000))
++#define LQ_GPTU_ID ((volatile u32 *)(LQ_GPTU + 0x0008))
++#define LQ_GPTU_CON(n, X) ((volatile u32 *)(LQ_GPTU + 0x0010 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */
++#define LQ_GPTU_RUN(n, X) ((volatile u32 *)(LQ_GPTU + 0x0018 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */
++#define LQ_GPTU_RELOAD(n, X) ((volatile u32 *)(LQ_GPTU + 0x0020 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */
++#define LQ_GPTU_COUNT(n, X) ((volatile u32 *)(LQ_GPTU + 0x0028 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */
++#define LQ_GPTU_IRNEN ((volatile u32 *)(LQ_GPTU + 0x00F4))
++#define LQ_GPTU_IRNICR ((volatile u32 *)(LQ_GPTU + 0x00F8))
++#define LQ_GPTU_IRNCR ((volatile u32 *)(LQ_GPTU + 0x00FC))
++
++/*
++ * Clock Control Register
++ */
++#define GPTU_CLC_SMC GET_BITS(*LQ_GPTU_CLC, 23, 16)
++#define GPTU_CLC_RMC GET_BITS(*LQ_GPTU_CLC, 15, 8)
++#define GPTU_CLC_FSOE (*LQ_GPTU_CLC & (1 << 5))
++#define GPTU_CLC_EDIS (*LQ_GPTU_CLC & (1 << 3))
++#define GPTU_CLC_SPEN (*LQ_GPTU_CLC & (1 << 2))
++#define GPTU_CLC_DISS (*LQ_GPTU_CLC & (1 << 1))
++#define GPTU_CLC_DISR (*LQ_GPTU_CLC & (1 << 0))
++
++#define GPTU_CLC_SMC_SET(value) SET_BITS(0, 23, 16, (value))
++#define GPTU_CLC_RMC_SET(value) SET_BITS(0, 15, 8, (value))
++#define GPTU_CLC_FSOE_SET(value) ((value) ? (1 << 5) : 0)
++#define GPTU_CLC_SBWE_SET(value) ((value) ? (1 << 4) : 0)
++#define GPTU_CLC_EDIS_SET(value) ((value) ? (1 << 3) : 0)
++#define GPTU_CLC_SPEN_SET(value) ((value) ? (1 << 2) : 0)
++#define GPTU_CLC_DISR_SET(value) ((value) ? (1 << 0) : 0)
++
++/*
++ * ID Register
++ */
++#define GPTU_ID_ID GET_BITS(*LQ_GPTU_ID, 15, 8)
++#define GPTU_ID_CFG GET_BITS(*LQ_GPTU_ID, 7, 5)
++#define GPTU_ID_REV GET_BITS(*LQ_GPTU_ID, 4, 0)
++
++/*
++ * Control Register of Timer/Counter nX
++ * n is the index of block (1 based index)
++ * X is either A or B
++ */
++#define GPTU_CON_SRC_EG(n, X) (*LQ_GPTU_CON(n, X) & (1 << 10))
++#define GPTU_CON_SRC_EXT(n, X) (*LQ_GPTU_CON(n, X) & (1 << 9))
++#define GPTU_CON_SYNC(n, X) (*LQ_GPTU_CON(n, X) & (1 << 8))
++#define GPTU_CON_EDGE(n, X) GET_BITS(*LQ_GPTU_CON(n, X), 7, 6)
++#define GPTU_CON_INV(n, X) (*LQ_GPTU_CON(n, X) & (1 << 5))
++#define GPTU_CON_EXT(n, X) (*LQ_GPTU_CON(n, A) & (1 << 4)) /* Timer/Counter B does not have this bit */
++#define GPTU_CON_STP(n, X) (*LQ_GPTU_CON(n, X) & (1 << 3))
++#define GPTU_CON_CNT(n, X) (*LQ_GPTU_CON(n, X) & (1 << 2))
++#define GPTU_CON_DIR(n, X) (*LQ_GPTU_CON(n, X) & (1 << 1))
++#define GPTU_CON_EN(n, X) (*LQ_GPTU_CON(n, X) & (1 << 0))
++
++#define GPTU_CON_SRC_EG_SET(value) ((value) ? 0 : (1 << 10))
++#define GPTU_CON_SRC_EXT_SET(value) ((value) ? (1 << 9) : 0)
++#define GPTU_CON_SYNC_SET(value) ((value) ? (1 << 8) : 0)
++#define GPTU_CON_EDGE_SET(value) SET_BITS(0, 7, 6, (value))
++#define GPTU_CON_INV_SET(value) ((value) ? (1 << 5) : 0)
++#define GPTU_CON_EXT_SET(value) ((value) ? (1 << 4) : 0)
++#define GPTU_CON_STP_SET(value) ((value) ? (1 << 3) : 0)
++#define GPTU_CON_CNT_SET(value) ((value) ? (1 << 2) : 0)
++#define GPTU_CON_DIR_SET(value) ((value) ? (1 << 1) : 0)
++
++#define GPTU_RUN_RL_SET(value) ((value) ? (1 << 2) : 0)
++#define GPTU_RUN_CEN_SET(value) ((value) ? (1 << 1) : 0)
++#define GPTU_RUN_SEN_SET(value) ((value) ? (1 << 0) : 0)
++
++#define GPTU_IRNEN_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0)
++#define GPTU_IRNCR_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0)
++
++#define TIMER_FLAG_MASK_SIZE(x) (x & 0x0001)
++#define TIMER_FLAG_MASK_TYPE(x) (x & 0x0002)
++#define TIMER_FLAG_MASK_STOP(x) (x & 0x0004)
++#define TIMER_FLAG_MASK_DIR(x) (x & 0x0008)
++#define TIMER_FLAG_NONE_EDGE 0x0000
++#define TIMER_FLAG_MASK_EDGE(x) (x & 0x0030)
++#define TIMER_FLAG_REAL 0x0000
++#define TIMER_FLAG_INVERT 0x0040
++#define TIMER_FLAG_MASK_INVERT(x) (x & 0x0040)
++#define TIMER_FLAG_MASK_TRIGGER(x) (x & 0x0070)
++#define TIMER_FLAG_MASK_SYNC(x) (x & 0x0080)
++#define TIMER_FLAG_CALLBACK_IN_HB 0x0200
++#define TIMER_FLAG_MASK_HANDLE(x) (x & 0x0300)
++#define TIMER_FLAG_MASK_SRC(x) (x & 0x1000)
++
++struct timer_dev_timer {
++ unsigned int f_irq_on;
++ unsigned int irq;
++ unsigned int flag;
++ unsigned long arg1;
++ unsigned long arg2;
++};
++
++struct timer_dev {
++ struct mutex gptu_mutex;
++ unsigned int number_of_timers;
++ unsigned int occupation;
++ unsigned int f_gptu_on;
++ struct timer_dev_timer timer[MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2];
++};
++
++unsigned long ltq_danube_fpi_bus_clock(int fpi);
++unsigned long ltq_vr9_fpi_bus_clock(int fpi);
++
++unsigned int ltq_get_fpi_bus_clock(int fpi) {
++ if (ltq_is_ase())
++ return CLOCK_133M;
++ else if (ltq_is_vr9())
++ return ltq_vr9_fpi_bus_clock(fpi);
++
++ return ltq_danube_fpi_bus_clock(fpi);
++}
++
++
++static long gptu_ioctl(struct file *, unsigned int, unsigned long);
++static int gptu_open(struct inode *, struct file *);
++static int gptu_release(struct inode *, struct file *);
++
++static struct file_operations gptu_fops = {
++ .owner = THIS_MODULE,
++ .unlocked_ioctl = gptu_ioctl,
++ .open = gptu_open,
++ .release = gptu_release
++};
++
++static struct miscdevice gptu_miscdev = {
++ .minor = MISC_DYNAMIC_MINOR,
++ .name = "gptu",
++ .fops = &gptu_fops,
++};
++
++static struct timer_dev timer_dev;
++
++static irqreturn_t timer_irq_handler(int irq, void *p)
++{
++ unsigned int timer;
++ unsigned int flag;
++ struct timer_dev_timer *dev_timer = (struct timer_dev_timer *)p;
++
++ timer = irq - TIMER_INTERRUPT;
++ if (timer < timer_dev.number_of_timers
++ && dev_timer == &timer_dev.timer[timer]) {
++ /* Clear interrupt. */
++ ltq_w32(1 << timer, LQ_GPTU_IRNCR);
++
++ /* Call user hanler or signal. */
++ flag = dev_timer->flag;
++ if (!(timer & 0x01)
++ || TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) {
++ /* 16-bit timer or timer A of 32-bit timer */
++ switch (TIMER_FLAG_MASK_HANDLE(flag)) {
++ case TIMER_FLAG_CALLBACK_IN_IRQ:
++ case TIMER_FLAG_CALLBACK_IN_HB:
++ if (dev_timer->arg1)
++ (*(timer_callback)dev_timer->arg1)(dev_timer->arg2);
++ break;
++ case TIMER_FLAG_SIGNAL:
++ send_sig((int)dev_timer->arg2, (struct task_struct *)dev_timer->arg1, 0);
++ break;
++ }
++ }
++ }
++ return IRQ_HANDLED;
++}
++
++static inline void lq_enable_gptu(void)
++{
++ struct clk *clk = clk_get_sys("ltq_gptu", NULL);
++ clk_enable(clk);
++
++ //ltq_pmu_enable(PMU_GPT);
++
++ /* Set divider as 1, disable write protection for SPEN, enable module. */
++ *LQ_GPTU_CLC =
++ GPTU_CLC_SMC_SET(0x00) |
++ GPTU_CLC_RMC_SET(0x01) |
++ GPTU_CLC_FSOE_SET(0) |
++ GPTU_CLC_SBWE_SET(1) |
++ GPTU_CLC_EDIS_SET(0) |
++ GPTU_CLC_SPEN_SET(0) |
++ GPTU_CLC_DISR_SET(0);
++}
++
++static inline void lq_disable_gptu(void)
++{
++ struct clk *clk = clk_get_sys("ltq_gptu", NULL);
++ ltq_w32(0x00, LQ_GPTU_IRNEN);
++ ltq_w32(0xfff, LQ_GPTU_IRNCR);
++
++ /* Set divider as 0, enable write protection for SPEN, disable module. */
++ *LQ_GPTU_CLC =
++ GPTU_CLC_SMC_SET(0x00) |
++ GPTU_CLC_RMC_SET(0x00) |
++ GPTU_CLC_FSOE_SET(0) |
++ GPTU_CLC_SBWE_SET(0) |
++ GPTU_CLC_EDIS_SET(0) |
++ GPTU_CLC_SPEN_SET(0) |
++ GPTU_CLC_DISR_SET(1);
++
++ clk_enable(clk);
++}
++
++int lq_request_timer(unsigned int timer, unsigned int flag,
++ unsigned long value, unsigned long arg1, unsigned long arg2)
++{
++ int ret = 0;
++ unsigned int con_reg, irnen_reg;
++ int n, X;
++
++ if (timer >= FIRST_TIMER + timer_dev.number_of_timers)
++ return -EINVAL;
++
++ printk(KERN_INFO "request_timer(%d, 0x%08X, %lu)...",
++ timer, flag, value);
++
++ if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT)
++ value &= 0xFFFF;
++ else
++ timer &= ~0x01;
++
++ mutex_lock(&timer_dev.gptu_mutex);
++
++ /*
++ * Allocate timer.
++ */
++ if (timer < FIRST_TIMER) {
++ unsigned int mask;
++ unsigned int shift;
++ /* This takes care of TIMER1B which is the only choice for Voice TAPI system */
++ unsigned int offset = TIMER2A;
++
++ /*
++ * Pick up a free timer.
++ */
++ if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) {
++ mask = 1 << offset;
++ shift = 1;
++ } else {
++ mask = 3 << offset;
++ shift = 2;
++ }
++ for (timer = offset;
++ timer < offset + timer_dev.number_of_timers;
++ timer += shift, mask <<= shift)
++ if (!(timer_dev.occupation & mask)) {
++ timer_dev.occupation |= mask;
++ break;
++ }
++ if (timer >= offset + timer_dev.number_of_timers) {
++ printk("failed![%d]\n", __LINE__);
++ mutex_unlock(&timer_dev.gptu_mutex);
++ return -EINVAL;
++ } else
++ ret = timer;
++ } else {
++ register unsigned int mask;
++
++ /*
++ * Check if the requested timer is free.
++ */
++ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++ if ((timer_dev.occupation & mask)) {
++ printk("failed![%d] mask %#x, timer_dev.occupation %#x\n",
++ __LINE__, mask, timer_dev.occupation);
++ mutex_unlock(&timer_dev.gptu_mutex);
++ return -EBUSY;
++ } else {
++ timer_dev.occupation |= mask;
++ ret = 0;
++ }
++ }
++
++ /*
++ * Prepare control register value.
++ */
++ switch (TIMER_FLAG_MASK_EDGE(flag)) {
++ default:
++ case TIMER_FLAG_NONE_EDGE:
++ con_reg = GPTU_CON_EDGE_SET(0x00);
++ break;
++ case TIMER_FLAG_RISE_EDGE:
++ con_reg = GPTU_CON_EDGE_SET(0x01);
++ break;
++ case TIMER_FLAG_FALL_EDGE:
++ con_reg = GPTU_CON_EDGE_SET(0x02);
++ break;
++ case TIMER_FLAG_ANY_EDGE:
++ con_reg = GPTU_CON_EDGE_SET(0x03);
++ break;
++ }
++ if (TIMER_FLAG_MASK_TYPE(flag) == TIMER_FLAG_TIMER)
++ con_reg |=
++ TIMER_FLAG_MASK_SRC(flag) ==
++ TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) :
++ GPTU_CON_SRC_EXT_SET(0);
++ else
++ con_reg |=
++ TIMER_FLAG_MASK_SRC(flag) ==
++ TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) :
++ GPTU_CON_SRC_EG_SET(0);
++ con_reg |=
++ TIMER_FLAG_MASK_SYNC(flag) ==
++ TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) :
++ GPTU_CON_SYNC_SET(1);
++ con_reg |=
++ TIMER_FLAG_MASK_INVERT(flag) ==
++ TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1);
++ con_reg |=
++ TIMER_FLAG_MASK_SIZE(flag) ==
++ TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) :
++ GPTU_CON_EXT_SET(1);
++ con_reg |=
++ TIMER_FLAG_MASK_STOP(flag) ==
++ TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0);
++ con_reg |=
++ TIMER_FLAG_MASK_TYPE(flag) ==
++ TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) :
++ GPTU_CON_CNT_SET(1);
++ con_reg |=
++ TIMER_FLAG_MASK_DIR(flag) ==
++ TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0);
++
++ /*
++ * Fill up running data.
++ */
++ timer_dev.timer[timer - FIRST_TIMER].flag = flag;
++ timer_dev.timer[timer - FIRST_TIMER].arg1 = arg1;
++ timer_dev.timer[timer - FIRST_TIMER].arg2 = arg2;
++ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++ timer_dev.timer[timer - FIRST_TIMER + 1].flag = flag;
++
++ /*
++ * Enable GPTU module.
++ */
++ if (!timer_dev.f_gptu_on) {
++ lq_enable_gptu();
++ timer_dev.f_gptu_on = 1;
++ }
++
++ /*
++ * Enable IRQ.
++ */
++ if (TIMER_FLAG_MASK_HANDLE(flag) != TIMER_FLAG_NO_HANDLE) {
++ if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL)
++ timer_dev.timer[timer - FIRST_TIMER].arg1 =
++ (unsigned long) find_task_by_vpid((int) arg1);
++
++ irnen_reg = 1 << (timer - FIRST_TIMER);
++
++ if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL
++ || (TIMER_FLAG_MASK_HANDLE(flag) ==
++ TIMER_FLAG_CALLBACK_IN_IRQ
++ && timer_dev.timer[timer - FIRST_TIMER].arg1)) {
++ enable_irq(timer_dev.timer[timer - FIRST_TIMER].irq);
++ timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 1;
++ }
++ } else
++ irnen_reg = 0;
++
++ /*
++ * Write config register, reload value and enable interrupt.
++ */
++ n = timer >> 1;
++ X = timer & 0x01;
++ *LQ_GPTU_CON(n, X) = con_reg;
++ *LQ_GPTU_RELOAD(n, X) = value;
++ /* printk("reload value = %d\n", (u32)value); */
++ *LQ_GPTU_IRNEN |= irnen_reg;
++
++ mutex_unlock(&timer_dev.gptu_mutex);
++ printk("successful!\n");
++ return ret;
++}
++EXPORT_SYMBOL(lq_request_timer);
++
++int lq_free_timer(unsigned int timer)
++{
++ unsigned int flag;
++ unsigned int mask;
++ int n, X;
++
++ if (!timer_dev.f_gptu_on)
++ return -EINVAL;
++
++ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++ return -EINVAL;
++
++ mutex_lock(&timer_dev.gptu_mutex);
++
++ flag = timer_dev.timer[timer - FIRST_TIMER].flag;
++ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++ timer &= ~0x01;
++
++ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++ if (((timer_dev.occupation & mask) ^ mask)) {
++ mutex_unlock(&timer_dev.gptu_mutex);
++ return -EINVAL;
++ }
++
++ n = timer >> 1;
++ X = timer & 0x01;
++
++ if (GPTU_CON_EN(n, X))
++ *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1);
++
++ *LQ_GPTU_IRNEN &= ~GPTU_IRNEN_TC_SET(n, X, 1);
++ *LQ_GPTU_IRNCR |= GPTU_IRNCR_TC_SET(n, X, 1);
++
++ if (timer_dev.timer[timer - FIRST_TIMER].f_irq_on) {
++ disable_irq(timer_dev.timer[timer - FIRST_TIMER].irq);
++ timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 0;
++ }
++
++ timer_dev.occupation &= ~mask;
++ if (!timer_dev.occupation && timer_dev.f_gptu_on) {
++ lq_disable_gptu();
++ timer_dev.f_gptu_on = 0;
++ }
++
++ mutex_unlock(&timer_dev.gptu_mutex);
++
++ return 0;
++}
++EXPORT_SYMBOL(lq_free_timer);
++
++int lq_start_timer(unsigned int timer, int is_resume)
++{
++ unsigned int flag;
++ unsigned int mask;
++ int n, X;
++
++ if (!timer_dev.f_gptu_on)
++ return -EINVAL;
++
++ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++ return -EINVAL;
++
++ mutex_lock(&timer_dev.gptu_mutex);
++
++ flag = timer_dev.timer[timer - FIRST_TIMER].flag;
++ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++ timer &= ~0x01;
++
++ mask = (TIMER_FLAG_MASK_SIZE(flag) ==
++ TIMER_FLAG_16BIT ? 1 : 3) << timer;
++ if (((timer_dev.occupation & mask) ^ mask)) {
++ mutex_unlock(&timer_dev.gptu_mutex);
++ return -EINVAL;
++ }
++
++ n = timer >> 1;
++ X = timer & 0x01;
++
++ *LQ_GPTU_RUN(n, X) = GPTU_RUN_RL_SET(!is_resume) | GPTU_RUN_SEN_SET(1);
++
++ mutex_unlock(&timer_dev.gptu_mutex);
++
++ return 0;
++}
++EXPORT_SYMBOL(lq_start_timer);
++
++int lq_stop_timer(unsigned int timer)
++{
++ unsigned int flag;
++ unsigned int mask;
++ int n, X;
++
++ if (!timer_dev.f_gptu_on)
++ return -EINVAL;
++
++ if (timer < FIRST_TIMER
++ || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++ return -EINVAL;
++
++ mutex_lock(&timer_dev.gptu_mutex);
++
++ flag = timer_dev.timer[timer - FIRST_TIMER].flag;
++ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++ timer &= ~0x01;
++
++ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++ if (((timer_dev.occupation & mask) ^ mask)) {
++ mutex_unlock(&timer_dev.gptu_mutex);
++ return -EINVAL;
++ }
++
++ n = timer >> 1;
++ X = timer & 0x01;
++
++ *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1);
++
++ mutex_unlock(&timer_dev.gptu_mutex);
++
++ return 0;
++}
++EXPORT_SYMBOL(lq_stop_timer);
++
++int lq_reset_counter_flags(u32 timer, u32 flags)
++{
++ unsigned int oflag;
++ unsigned int mask, con_reg;
++ int n, X;
++
++ if (!timer_dev.f_gptu_on)
++ return -EINVAL;
++
++ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++ return -EINVAL;
++
++ mutex_lock(&timer_dev.gptu_mutex);
++
++ oflag = timer_dev.timer[timer - FIRST_TIMER].flag;
++ if (TIMER_FLAG_MASK_SIZE(oflag) != TIMER_FLAG_16BIT)
++ timer &= ~0x01;
++
++ mask = (TIMER_FLAG_MASK_SIZE(oflag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++ if (((timer_dev.occupation & mask) ^ mask)) {
++ mutex_unlock(&timer_dev.gptu_mutex);
++ return -EINVAL;
++ }
++
++ switch (TIMER_FLAG_MASK_EDGE(flags)) {
++ default:
++ case TIMER_FLAG_NONE_EDGE:
++ con_reg = GPTU_CON_EDGE_SET(0x00);
++ break;
++ case TIMER_FLAG_RISE_EDGE:
++ con_reg = GPTU_CON_EDGE_SET(0x01);
++ break;
++ case TIMER_FLAG_FALL_EDGE:
++ con_reg = GPTU_CON_EDGE_SET(0x02);
++ break;
++ case TIMER_FLAG_ANY_EDGE:
++ con_reg = GPTU_CON_EDGE_SET(0x03);
++ break;
++ }
++ if (TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER)
++ con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : GPTU_CON_SRC_EXT_SET(0);
++ else
++ con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : GPTU_CON_SRC_EG_SET(0);
++ con_reg |= TIMER_FLAG_MASK_SYNC(flags) == TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : GPTU_CON_SYNC_SET(1);
++ con_reg |= TIMER_FLAG_MASK_INVERT(flags) == TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1);
++ con_reg |= TIMER_FLAG_MASK_SIZE(flags) == TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : GPTU_CON_EXT_SET(1);
++ con_reg |= TIMER_FLAG_MASK_STOP(flags) == TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0);
++ con_reg |= TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : GPTU_CON_CNT_SET(1);
++ con_reg |= TIMER_FLAG_MASK_DIR(flags) == TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0);
++
++ timer_dev.timer[timer - FIRST_TIMER].flag = flags;
++ if (TIMER_FLAG_MASK_SIZE(flags) != TIMER_FLAG_16BIT)
++ timer_dev.timer[timer - FIRST_TIMER + 1].flag = flags;
++
++ n = timer >> 1;
++ X = timer & 0x01;
++
++ *LQ_GPTU_CON(n, X) = con_reg;
++ smp_wmb();
++ printk(KERN_INFO "[%s]: counter%d oflags %#x, nflags %#x, GPTU_CON %#x\n", __func__, timer, oflag, flags, *LQ_GPTU_CON(n, X));
++ mutex_unlock(&timer_dev.gptu_mutex);
++ return 0;
++}
++EXPORT_SYMBOL(lq_reset_counter_flags);
++
++int lq_get_count_value(unsigned int timer, unsigned long *value)
++{
++ unsigned int flag;
++ unsigned int mask;
++ int n, X;
++
++ if (!timer_dev.f_gptu_on)
++ return -EINVAL;
++
++ if (timer < FIRST_TIMER
++ || timer >= FIRST_TIMER + timer_dev.number_of_timers)
++ return -EINVAL;
++
++ mutex_lock(&timer_dev.gptu_mutex);
++
++ flag = timer_dev.timer[timer - FIRST_TIMER].flag;
++ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
++ timer &= ~0x01;
++
++ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
++ if (((timer_dev.occupation & mask) ^ mask)) {
++ mutex_unlock(&timer_dev.gptu_mutex);
++ return -EINVAL;
++ }
++
++ n = timer >> 1;
++ X = timer & 0x01;
++
++ *value = *LQ_GPTU_COUNT(n, X);
++
++ mutex_unlock(&timer_dev.gptu_mutex);
++
++ return 0;
++}
++EXPORT_SYMBOL(lq_get_count_value);
++
++u32 lq_cal_divider(unsigned long freq)
++{
++ u64 module_freq, fpi = ltq_get_fpi_bus_clock(2);
++ u32 clock_divider = 1;
++ module_freq = fpi * 1000;
++ do_div(module_freq, clock_divider * freq);
++ return module_freq;
++}
++EXPORT_SYMBOL(lq_cal_divider);
++
++int lq_set_timer(unsigned int timer, unsigned int freq, int is_cyclic,
++ int is_ext_src, unsigned int handle_flag, unsigned long arg1,
++ unsigned long arg2)
++{
++ unsigned long divider;
++ unsigned int flag;
++
++ divider = lq_cal_divider(freq);
++ if (divider == 0)
++ return -EINVAL;
++ flag = ((divider & ~0xFFFF) ? TIMER_FLAG_32BIT : TIMER_FLAG_16BIT)
++ | (is_cyclic ? TIMER_FLAG_CYCLIC : TIMER_FLAG_ONCE)
++ | (is_ext_src ? TIMER_FLAG_EXT_SRC : TIMER_FLAG_INT_SRC)
++ | TIMER_FLAG_TIMER | TIMER_FLAG_DOWN
++ | TIMER_FLAG_MASK_HANDLE(handle_flag);
++
++ printk(KERN_INFO "lq_set_timer(%d, %d), divider = %lu\n",
++ timer, freq, divider);
++ return lq_request_timer(timer, flag, divider, arg1, arg2);
++}
++EXPORT_SYMBOL(lq_set_timer);
++
++int lq_set_counter(unsigned int timer, unsigned int flag, u32 reload,
++ unsigned long arg1, unsigned long arg2)
++{
++ printk(KERN_INFO "lq_set_counter(%d, %#x, %d)\n", timer, flag, reload);
++ return lq_request_timer(timer, flag, reload, arg1, arg2);
++}
++EXPORT_SYMBOL(lq_set_counter);
++
++static long gptu_ioctl(struct file *file, unsigned int cmd,
++ unsigned long arg)
++{
++ int ret;
++ struct gptu_ioctl_param param;
++
++ if (!access_ok(VERIFY_READ, arg, sizeof(struct gptu_ioctl_param)))
++ return -EFAULT;
++ copy_from_user(¶m, (void *) arg, sizeof(param));
++
++ if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER
++ || GPTU_SET_COUNTER) && param.timer < 2)
++ || cmd == GPTU_GET_COUNT_VALUE || cmd == GPTU_CALCULATE_DIVIDER)
++ && !access_ok(VERIFY_WRITE, arg,
++ sizeof(struct gptu_ioctl_param)))
++ return -EFAULT;
++
++ switch (cmd) {
++ case GPTU_REQUEST_TIMER:
++ ret = lq_request_timer(param.timer, param.flag, param.value,
++ (unsigned long) param.pid,
++ (unsigned long) param.sig);
++ if (ret > 0) {
++ copy_to_user(&((struct gptu_ioctl_param *) arg)->
++ timer, &ret, sizeof(&ret));
++ ret = 0;
++ }
++ break;
++ case GPTU_FREE_TIMER:
++ ret = lq_free_timer(param.timer);
++ break;
++ case GPTU_START_TIMER:
++ ret = lq_start_timer(param.timer, param.flag);
++ break;
++ case GPTU_STOP_TIMER:
++ ret = lq_stop_timer(param.timer);
++ break;
++ case GPTU_GET_COUNT_VALUE:
++ ret = lq_get_count_value(param.timer, ¶m.value);
++ if (!ret)
++ copy_to_user(&((struct gptu_ioctl_param *) arg)->
++ value, ¶m.value,
++ sizeof(param.value));
++ break;
++ case GPTU_CALCULATE_DIVIDER:
++ param.value = lq_cal_divider(param.value);
++ if (param.value == 0)
++ ret = -EINVAL;
++ else {
++ copy_to_user(&((struct gptu_ioctl_param *) arg)->
++ value, ¶m.value,
++ sizeof(param.value));
++ ret = 0;
++ }
++ break;
++ case GPTU_SET_TIMER:
++ ret = lq_set_timer(param.timer, param.value,
++ TIMER_FLAG_MASK_STOP(param.flag) !=
++ TIMER_FLAG_ONCE ? 1 : 0,
++ TIMER_FLAG_MASK_SRC(param.flag) ==
++ TIMER_FLAG_EXT_SRC ? 1 : 0,
++ TIMER_FLAG_MASK_HANDLE(param.flag) ==
++ TIMER_FLAG_SIGNAL ? TIMER_FLAG_SIGNAL :
++ TIMER_FLAG_NO_HANDLE,
++ (unsigned long) param.pid,
++ (unsigned long) param.sig);
++ if (ret > 0) {
++ copy_to_user(&((struct gptu_ioctl_param *) arg)->
++ timer, &ret, sizeof(&ret));
++ ret = 0;
++ }
++ break;
++ case GPTU_SET_COUNTER:
++ lq_set_counter(param.timer, param.flag, param.value, 0, 0);
++ if (ret > 0) {
++ copy_to_user(&((struct gptu_ioctl_param *) arg)->
++ timer, &ret, sizeof(&ret));
++ ret = 0;
++ }
++ break;
++ default:
++ ret = -ENOTTY;
++ }
++
++ return ret;
++}
++
++static int gptu_open(struct inode *inode, struct file *file)
++{
++ return 0;
++}
++
++static int gptu_release(struct inode *inode, struct file *file)
++{
++ return 0;
++}
++
++int __init lq_gptu_init(void)
++{
++ int ret;
++ unsigned int i;
++
++ ltq_w32(0, LQ_GPTU_IRNEN);
++ ltq_w32(0xfff, LQ_GPTU_IRNCR);
++
++ memset(&timer_dev, 0, sizeof(timer_dev));
++ mutex_init(&timer_dev.gptu_mutex);
++
++ lq_enable_gptu();
++ timer_dev.number_of_timers = GPTU_ID_CFG * 2;
++ lq_disable_gptu();
++ if (timer_dev.number_of_timers > MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2)
++ timer_dev.number_of_timers = MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2;
++ printk(KERN_INFO "gptu: totally %d 16-bit timers/counters\n", timer_dev.number_of_timers);
++
++ ret = misc_register(&gptu_miscdev);
++ if (ret) {
++ printk(KERN_ERR "gptu: can't misc_register, get error %d\n", -ret);
++ return ret;
++ } else {
++ printk(KERN_INFO "gptu: misc_register on minor %d\n", gptu_miscdev.minor);
++ }
++
++ for (i = 0; i < timer_dev.number_of_timers; i++) {
++ ret = request_irq(TIMER_INTERRUPT + i, timer_irq_handler, IRQF_TIMER, gptu_miscdev.name, &timer_dev.timer[i]);
++ if (ret) {
++ for (; i >= 0; i--)
++ free_irq(TIMER_INTERRUPT + i, &timer_dev.timer[i]);
++ misc_deregister(&gptu_miscdev);
++ printk(KERN_ERR "gptu: failed in requesting irq (%d), get error %d\n", i, -ret);
++ return ret;
++ } else {
++ timer_dev.timer[i].irq = TIMER_INTERRUPT + i;
++ disable_irq(timer_dev.timer[i].irq);
++ printk(KERN_INFO "gptu: succeeded to request irq %d\n", timer_dev.timer[i].irq);
++ }
++ }
++
++ return 0;
++}
++
++void __exit lq_gptu_exit(void)
++{
++ unsigned int i;
++
++ for (i = 0; i < timer_dev.number_of_timers; i++) {
++ if (timer_dev.timer[i].f_irq_on)
++ disable_irq(timer_dev.timer[i].irq);
++ free_irq(timer_dev.timer[i].irq, &timer_dev.timer[i]);
++ }
++ lq_disable_gptu();
++ misc_deregister(&gptu_miscdev);
++}
++
++module_init(lq_gptu_init);
++module_exit(lq_gptu_exit);
+--
+1.7.9.1
+
+++ /dev/null
-From 7d332825d131e70daff66b934797c89f50c11ace Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 20 Feb 2012 12:16:31 +0100
-Subject: [PATCH 46/70] WDT: MIPS: lantiq: use module_platform_driver inside
- lantiq watchdog driver
-
-Reduce boilerplate code by converting driver to module_platform_driver.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Cc: linux-watchdog@vger.kernel.org
----
- drivers/watchdog/lantiq_wdt.c | 19 +++----------------
- 1 files changed, 3 insertions(+), 16 deletions(-)
-
---- a/drivers/watchdog/lantiq_wdt.c
-+++ b/drivers/watchdog/lantiq_wdt.c
-@@ -182,7 +182,7 @@ static struct miscdevice ltq_wdt_miscdev
- .fops = <q_wdt_fops,
- };
-
--static int __init
-+static int __devinit
- ltq_wdt_probe(struct platform_device *pdev)
- {
- struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-@@ -230,6 +230,7 @@ ltq_wdt_remove(struct platform_device *p
-
-
- static struct platform_driver ltq_wdt_driver = {
-+ .probe = ltq_wdt_probe,
- .remove = __devexit_p(ltq_wdt_remove),
- .driver = {
- .name = "ltq_wdt",
-@@ -237,21 +238,7 @@ static struct platform_driver ltq_wdt_dr
- },
- };
-
--static int __init
--init_ltq_wdt(void)
--{
-- return platform_driver_probe(<q_wdt_driver, ltq_wdt_probe);
--}
--
--static void __exit
--exit_ltq_wdt(void)
--{
-- return platform_driver_unregister(<q_wdt_driver);
--}
--
--module_init(init_ltq_wdt);
--module_exit(exit_ltq_wdt);
--
-+module_platform_driver(ltq_wdt_driver);
- module_param(nowayout, int, 0);
- MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
-
+++ /dev/null
-From b672c54f9ae4504687a80bb51cdfe102bdae96e1 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 29 Sep 2011 17:16:38 +0200
-Subject: [PATCH 47/70] MIPS: lantiq: adds GPTU driver
-
----
- arch/mips/include/asm/mach-lantiq/lantiq_timer.h | 155 ++++
- arch/mips/lantiq/xway/Makefile | 2 +-
- arch/mips/lantiq/xway/sysctrl.c | 1 +
- arch/mips/lantiq/xway/timer.c | 846 ++++++++++++++++++++++
- 4 files changed, 1003 insertions(+), 1 deletions(-)
- create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_timer.h
- create mode 100644 arch/mips/lantiq/xway/timer.c
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-lantiq/lantiq_timer.h
-@@ -0,0 +1,155 @@
-+#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
-+#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
-+
-+
-+/******************************************************************************
-+ Copyright (c) 2002, Infineon Technologies. All rights reserved.
-+
-+ No Warranty
-+ Because the program is licensed free of charge, there is no warranty for
-+ the program, to the extent permitted by applicable law. Except when
-+ otherwise stated in writing the copyright holders and/or other parties
-+ provide the program "as is" without warranty of any kind, either
-+ expressed or implied, including, but not limited to, the implied
-+ warranties of merchantability and fitness for a particular purpose. The
-+ entire risk as to the quality and performance of the program is with
-+ you. should the program prove defective, you assume the cost of all
-+ necessary servicing, repair or correction.
-+
-+ In no event unless required by applicable law or agreed to in writing
-+ will any copyright holder, or any other party who may modify and/or
-+ redistribute the program as permitted above, be liable to you for
-+ damages, including any general, special, incidental or consequential
-+ damages arising out of the use or inability to use the program
-+ (including but not limited to loss of data or data being rendered
-+ inaccurate or losses sustained by you or third parties or a failure of
-+ the program to operate with any other programs), even if such holder or
-+ other party has been advised of the possibility of such damages.
-+******************************************************************************/
-+
-+
-+/*
-+ * ####################################
-+ * Definition
-+ * ####################################
-+ */
-+
-+/*
-+ * Available Timer/Counter Index
-+ */
-+#define TIMER(n, X) (n * 2 + (X ? 1 : 0))
-+#define TIMER_ANY 0x00
-+#define TIMER1A TIMER(1, 0)
-+#define TIMER1B TIMER(1, 1)
-+#define TIMER2A TIMER(2, 0)
-+#define TIMER2B TIMER(2, 1)
-+#define TIMER3A TIMER(3, 0)
-+#define TIMER3B TIMER(3, 1)
-+
-+/*
-+ * Flag of Timer/Counter
-+ * These flags specify the way in which timer is configured.
-+ */
-+/* Bit size of timer/counter. */
-+#define TIMER_FLAG_16BIT 0x0000
-+#define TIMER_FLAG_32BIT 0x0001
-+/* Switch between timer and counter. */
-+#define TIMER_FLAG_TIMER 0x0000
-+#define TIMER_FLAG_COUNTER 0x0002
-+/* Stop or continue when overflowing/underflowing. */
-+#define TIMER_FLAG_ONCE 0x0000
-+#define TIMER_FLAG_CYCLIC 0x0004
-+/* Count up or counter down. */
-+#define TIMER_FLAG_UP 0x0000
-+#define TIMER_FLAG_DOWN 0x0008
-+/* Count on specific level or edge. */
-+#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000
-+#define TIMER_FLAG_LOW_LEVEL_SENSITIVE 0x0040
-+#define TIMER_FLAG_RISE_EDGE 0x0010
-+#define TIMER_FLAG_FALL_EDGE 0x0020
-+#define TIMER_FLAG_ANY_EDGE 0x0030
-+/* Signal is syncronous to module clock or not. */
-+#define TIMER_FLAG_UNSYNC 0x0000
-+#define TIMER_FLAG_SYNC 0x0080
-+/* Different interrupt handle type. */
-+#define TIMER_FLAG_NO_HANDLE 0x0000
-+#if defined(__KERNEL__)
-+ #define TIMER_FLAG_CALLBACK_IN_IRQ 0x0100
-+#endif // defined(__KERNEL__)
-+#define TIMER_FLAG_SIGNAL 0x0300
-+/* Internal clock source or external clock source */
-+#define TIMER_FLAG_INT_SRC 0x0000
-+#define TIMER_FLAG_EXT_SRC 0x1000
-+
-+
-+/*
-+ * ioctl Command
-+ */
-+#define GPTU_REQUEST_TIMER 0x01 /* General method to setup timer/counter. */
-+#define GPTU_FREE_TIMER 0x02 /* Free timer/counter. */
-+#define GPTU_START_TIMER 0x03 /* Start or resume timer/counter. */
-+#define GPTU_STOP_TIMER 0x04 /* Suspend timer/counter. */
-+#define GPTU_GET_COUNT_VALUE 0x05 /* Get current count value. */
-+#define GPTU_CALCULATE_DIVIDER 0x06 /* Calculate timer divider from given freq.*/
-+#define GPTU_SET_TIMER 0x07 /* Simplified method to setup timer. */
-+#define GPTU_SET_COUNTER 0x08 /* Simplified method to setup counter. */
-+
-+/*
-+ * Data Type Used to Call ioctl
-+ */
-+struct gptu_ioctl_param {
-+ unsigned int timer; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and *
-+ * GPTU_SET_COUNTER, this field is ID of expected *
-+ * timer/counter. If it's zero, a timer/counter would *
-+ * be dynamically allocated and ID would be stored in *
-+ * this field. *
-+ * In command GPTU_GET_COUNT_VALUE, this field is *
-+ * ignored. *
-+ * In other command, this field is ID of timer/counter *
-+ * allocated. */
-+ unsigned int flag; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and *
-+ * GPTU_SET_COUNTER, this field contains flags to *
-+ * specify how to configure timer/counter. *
-+ * In command GPTU_START_TIMER, zero indicate start *
-+ * and non-zero indicate resume timer/counter. *
-+ * In other command, this field is ignored. */
-+ unsigned long value; /* In command GPTU_REQUEST_TIMER, this field contains *
-+ * init/reload value. *
-+ * In command GPTU_SET_TIMER, this field contains *
-+ * frequency (0.001Hz) of timer. *
-+ * In command GPTU_GET_COUNT_VALUE, current count *
-+ * value would be stored in this field. *
-+ * In command GPTU_CALCULATE_DIVIDER, this field *
-+ * contains frequency wanted, and after calculation, *
-+ * divider would be stored in this field to overwrite *
-+ * the frequency. *
-+ * In other command, this field is ignored. */
-+ int pid; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, *
-+ * if signal is required, this field contains process *
-+ * ID to which signal would be sent. *
-+ * In other command, this field is ignored. */
-+ int sig; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, *
-+ * if signal is required, this field contains signal *
-+ * number which would be sent. *
-+ * In other command, this field is ignored. */
-+};
-+
-+/*
-+ * ####################################
-+ * Data Type
-+ * ####################################
-+ */
-+typedef void (*timer_callback)(unsigned long arg);
-+
-+extern int lq_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long);
-+extern int lq_free_timer(unsigned int);
-+extern int lq_start_timer(unsigned int, int);
-+extern int lq_stop_timer(unsigned int);
-+extern int lq_reset_counter_flags(u32 timer, u32 flags);
-+extern int lq_get_count_value(unsigned int, unsigned long *);
-+extern u32 lq_cal_divider(unsigned long);
-+extern int lq_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long);
-+extern int lq_set_counter(unsigned int timer, unsigned int flag,
-+ u32 reload, unsigned long arg1, unsigned long arg2);
-+
-+#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */
---- a/arch/mips/lantiq/xway/Makefile
-+++ b/arch/mips/lantiq/xway/Makefile
-@@ -1,4 +1,4 @@
--obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o nand.o
-+obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o nand.o timer.o
-
- obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
- obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
---- a/arch/mips/lantiq/xway/sysctrl.c
-+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -147,6 +147,7 @@ void __init ltq_soc_init(void)
- clkdev_add_pmu("ltq_dma", NULL, 0, PMU_DMA);
- clkdev_add_pmu("ltq_stp", NULL, 0, PMU_STP);
- clkdev_add_pmu("ltq_spi", NULL, 0, PMU_SPI);
-+ clkdev_add_pmu("ltq_gptu", NULL, 0, PMU_GPT);
- if (!ltq_is_vr9())
- clkdev_add_pmu("ltq_etop", NULL, 0, PMU_PPE);
- if (ltq_is_ase()) {
---- /dev/null
-+++ b/arch/mips/lantiq/xway/timer.c
-@@ -0,0 +1,846 @@
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/fs.h>
-+#include <linux/miscdevice.h>
-+#include <linux/init.h>
-+#include <linux/uaccess.h>
-+#include <linux/unistd.h>
-+#include <linux/errno.h>
-+#include <linux/interrupt.h>
-+#include <linux/sched.h>
-+
-+#include <asm/irq.h>
-+#include <asm/div64.h>
-+#include "../clk.h"
-+
-+#include <lantiq_soc.h>
-+#include <lantiq_irq.h>
-+#include <lantiq_timer.h>
-+
-+#define MAX_NUM_OF_32BIT_TIMER_BLOCKS 6
-+
-+#ifdef TIMER1A
-+#define FIRST_TIMER TIMER1A
-+#else
-+#define FIRST_TIMER 2
-+#endif
-+
-+/*
-+ * GPTC divider is set or not.
-+ */
-+#define GPTU_CLC_RMC_IS_SET 0
-+
-+/*
-+ * Timer Interrupt (IRQ)
-+ */
-+/* Must be adjusted when ICU driver is available */
-+#define TIMER_INTERRUPT (INT_NUM_IM3_IRL0 + 22)
-+
-+/*
-+ * Bits Operation
-+ */
-+#define GET_BITS(x, msb, lsb) \
-+ (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
-+#define SET_BITS(x, msb, lsb, value) \
-+ (((x) & ~(((1 << ((msb) + 1)) - 1) ^ ((1 << (lsb)) - 1))) | \
-+ (((value) & ((1 << (1 + (msb) - (lsb))) - 1)) << (lsb)))
-+
-+/*
-+ * GPTU Register Mapping
-+ */
-+#define LQ_GPTU (KSEG1 + 0x1E100A00)
-+#define LQ_GPTU_CLC ((volatile u32 *)(LQ_GPTU + 0x0000))
-+#define LQ_GPTU_ID ((volatile u32 *)(LQ_GPTU + 0x0008))
-+#define LQ_GPTU_CON(n, X) ((volatile u32 *)(LQ_GPTU + 0x0010 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */
-+#define LQ_GPTU_RUN(n, X) ((volatile u32 *)(LQ_GPTU + 0x0018 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */
-+#define LQ_GPTU_RELOAD(n, X) ((volatile u32 *)(LQ_GPTU + 0x0020 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */
-+#define LQ_GPTU_COUNT(n, X) ((volatile u32 *)(LQ_GPTU + 0x0028 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */
-+#define LQ_GPTU_IRNEN ((volatile u32 *)(LQ_GPTU + 0x00F4))
-+#define LQ_GPTU_IRNICR ((volatile u32 *)(LQ_GPTU + 0x00F8))
-+#define LQ_GPTU_IRNCR ((volatile u32 *)(LQ_GPTU + 0x00FC))
-+
-+/*
-+ * Clock Control Register
-+ */
-+#define GPTU_CLC_SMC GET_BITS(*LQ_GPTU_CLC, 23, 16)
-+#define GPTU_CLC_RMC GET_BITS(*LQ_GPTU_CLC, 15, 8)
-+#define GPTU_CLC_FSOE (*LQ_GPTU_CLC & (1 << 5))
-+#define GPTU_CLC_EDIS (*LQ_GPTU_CLC & (1 << 3))
-+#define GPTU_CLC_SPEN (*LQ_GPTU_CLC & (1 << 2))
-+#define GPTU_CLC_DISS (*LQ_GPTU_CLC & (1 << 1))
-+#define GPTU_CLC_DISR (*LQ_GPTU_CLC & (1 << 0))
-+
-+#define GPTU_CLC_SMC_SET(value) SET_BITS(0, 23, 16, (value))
-+#define GPTU_CLC_RMC_SET(value) SET_BITS(0, 15, 8, (value))
-+#define GPTU_CLC_FSOE_SET(value) ((value) ? (1 << 5) : 0)
-+#define GPTU_CLC_SBWE_SET(value) ((value) ? (1 << 4) : 0)
-+#define GPTU_CLC_EDIS_SET(value) ((value) ? (1 << 3) : 0)
-+#define GPTU_CLC_SPEN_SET(value) ((value) ? (1 << 2) : 0)
-+#define GPTU_CLC_DISR_SET(value) ((value) ? (1 << 0) : 0)
-+
-+/*
-+ * ID Register
-+ */
-+#define GPTU_ID_ID GET_BITS(*LQ_GPTU_ID, 15, 8)
-+#define GPTU_ID_CFG GET_BITS(*LQ_GPTU_ID, 7, 5)
-+#define GPTU_ID_REV GET_BITS(*LQ_GPTU_ID, 4, 0)
-+
-+/*
-+ * Control Register of Timer/Counter nX
-+ * n is the index of block (1 based index)
-+ * X is either A or B
-+ */
-+#define GPTU_CON_SRC_EG(n, X) (*LQ_GPTU_CON(n, X) & (1 << 10))
-+#define GPTU_CON_SRC_EXT(n, X) (*LQ_GPTU_CON(n, X) & (1 << 9))
-+#define GPTU_CON_SYNC(n, X) (*LQ_GPTU_CON(n, X) & (1 << 8))
-+#define GPTU_CON_EDGE(n, X) GET_BITS(*LQ_GPTU_CON(n, X), 7, 6)
-+#define GPTU_CON_INV(n, X) (*LQ_GPTU_CON(n, X) & (1 << 5))
-+#define GPTU_CON_EXT(n, X) (*LQ_GPTU_CON(n, A) & (1 << 4)) /* Timer/Counter B does not have this bit */
-+#define GPTU_CON_STP(n, X) (*LQ_GPTU_CON(n, X) & (1 << 3))
-+#define GPTU_CON_CNT(n, X) (*LQ_GPTU_CON(n, X) & (1 << 2))
-+#define GPTU_CON_DIR(n, X) (*LQ_GPTU_CON(n, X) & (1 << 1))
-+#define GPTU_CON_EN(n, X) (*LQ_GPTU_CON(n, X) & (1 << 0))
-+
-+#define GPTU_CON_SRC_EG_SET(value) ((value) ? 0 : (1 << 10))
-+#define GPTU_CON_SRC_EXT_SET(value) ((value) ? (1 << 9) : 0)
-+#define GPTU_CON_SYNC_SET(value) ((value) ? (1 << 8) : 0)
-+#define GPTU_CON_EDGE_SET(value) SET_BITS(0, 7, 6, (value))
-+#define GPTU_CON_INV_SET(value) ((value) ? (1 << 5) : 0)
-+#define GPTU_CON_EXT_SET(value) ((value) ? (1 << 4) : 0)
-+#define GPTU_CON_STP_SET(value) ((value) ? (1 << 3) : 0)
-+#define GPTU_CON_CNT_SET(value) ((value) ? (1 << 2) : 0)
-+#define GPTU_CON_DIR_SET(value) ((value) ? (1 << 1) : 0)
-+
-+#define GPTU_RUN_RL_SET(value) ((value) ? (1 << 2) : 0)
-+#define GPTU_RUN_CEN_SET(value) ((value) ? (1 << 1) : 0)
-+#define GPTU_RUN_SEN_SET(value) ((value) ? (1 << 0) : 0)
-+
-+#define GPTU_IRNEN_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0)
-+#define GPTU_IRNCR_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0)
-+
-+#define TIMER_FLAG_MASK_SIZE(x) (x & 0x0001)
-+#define TIMER_FLAG_MASK_TYPE(x) (x & 0x0002)
-+#define TIMER_FLAG_MASK_STOP(x) (x & 0x0004)
-+#define TIMER_FLAG_MASK_DIR(x) (x & 0x0008)
-+#define TIMER_FLAG_NONE_EDGE 0x0000
-+#define TIMER_FLAG_MASK_EDGE(x) (x & 0x0030)
-+#define TIMER_FLAG_REAL 0x0000
-+#define TIMER_FLAG_INVERT 0x0040
-+#define TIMER_FLAG_MASK_INVERT(x) (x & 0x0040)
-+#define TIMER_FLAG_MASK_TRIGGER(x) (x & 0x0070)
-+#define TIMER_FLAG_MASK_SYNC(x) (x & 0x0080)
-+#define TIMER_FLAG_CALLBACK_IN_HB 0x0200
-+#define TIMER_FLAG_MASK_HANDLE(x) (x & 0x0300)
-+#define TIMER_FLAG_MASK_SRC(x) (x & 0x1000)
-+
-+struct timer_dev_timer {
-+ unsigned int f_irq_on;
-+ unsigned int irq;
-+ unsigned int flag;
-+ unsigned long arg1;
-+ unsigned long arg2;
-+};
-+
-+struct timer_dev {
-+ struct mutex gptu_mutex;
-+ unsigned int number_of_timers;
-+ unsigned int occupation;
-+ unsigned int f_gptu_on;
-+ struct timer_dev_timer timer[MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2];
-+};
-+
-+unsigned long ltq_danube_fpi_bus_clock(int fpi);
-+unsigned long ltq_vr9_fpi_bus_clock(int fpi);
-+
-+unsigned int ltq_get_fpi_bus_clock(int fpi) {
-+ if (ltq_is_ase())
-+ return CLOCK_133M;
-+ else if (ltq_is_vr9())
-+ return ltq_vr9_fpi_bus_clock(fpi);
-+
-+ return ltq_danube_fpi_bus_clock(fpi);
-+}
-+
-+
-+static long gptu_ioctl(struct file *, unsigned int, unsigned long);
-+static int gptu_open(struct inode *, struct file *);
-+static int gptu_release(struct inode *, struct file *);
-+
-+static struct file_operations gptu_fops = {
-+ .owner = THIS_MODULE,
-+ .unlocked_ioctl = gptu_ioctl,
-+ .open = gptu_open,
-+ .release = gptu_release
-+};
-+
-+static struct miscdevice gptu_miscdev = {
-+ .minor = MISC_DYNAMIC_MINOR,
-+ .name = "gptu",
-+ .fops = &gptu_fops,
-+};
-+
-+static struct timer_dev timer_dev;
-+
-+static irqreturn_t timer_irq_handler(int irq, void *p)
-+{
-+ unsigned int timer;
-+ unsigned int flag;
-+ struct timer_dev_timer *dev_timer = (struct timer_dev_timer *)p;
-+
-+ timer = irq - TIMER_INTERRUPT;
-+ if (timer < timer_dev.number_of_timers
-+ && dev_timer == &timer_dev.timer[timer]) {
-+ /* Clear interrupt. */
-+ ltq_w32(1 << timer, LQ_GPTU_IRNCR);
-+
-+ /* Call user hanler or signal. */
-+ flag = dev_timer->flag;
-+ if (!(timer & 0x01)
-+ || TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) {
-+ /* 16-bit timer or timer A of 32-bit timer */
-+ switch (TIMER_FLAG_MASK_HANDLE(flag)) {
-+ case TIMER_FLAG_CALLBACK_IN_IRQ:
-+ case TIMER_FLAG_CALLBACK_IN_HB:
-+ if (dev_timer->arg1)
-+ (*(timer_callback)dev_timer->arg1)(dev_timer->arg2);
-+ break;
-+ case TIMER_FLAG_SIGNAL:
-+ send_sig((int)dev_timer->arg2, (struct task_struct *)dev_timer->arg1, 0);
-+ break;
-+ }
-+ }
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+static inline void lq_enable_gptu(void)
-+{
-+ struct clk *clk = clk_get_sys("ltq_gptu", NULL);
-+ clk_enable(clk);
-+
-+ //ltq_pmu_enable(PMU_GPT);
-+
-+ /* Set divider as 1, disable write protection for SPEN, enable module. */
-+ *LQ_GPTU_CLC =
-+ GPTU_CLC_SMC_SET(0x00) |
-+ GPTU_CLC_RMC_SET(0x01) |
-+ GPTU_CLC_FSOE_SET(0) |
-+ GPTU_CLC_SBWE_SET(1) |
-+ GPTU_CLC_EDIS_SET(0) |
-+ GPTU_CLC_SPEN_SET(0) |
-+ GPTU_CLC_DISR_SET(0);
-+}
-+
-+static inline void lq_disable_gptu(void)
-+{
-+ struct clk *clk = clk_get_sys("ltq_gptu", NULL);
-+ ltq_w32(0x00, LQ_GPTU_IRNEN);
-+ ltq_w32(0xfff, LQ_GPTU_IRNCR);
-+
-+ /* Set divider as 0, enable write protection for SPEN, disable module. */
-+ *LQ_GPTU_CLC =
-+ GPTU_CLC_SMC_SET(0x00) |
-+ GPTU_CLC_RMC_SET(0x00) |
-+ GPTU_CLC_FSOE_SET(0) |
-+ GPTU_CLC_SBWE_SET(0) |
-+ GPTU_CLC_EDIS_SET(0) |
-+ GPTU_CLC_SPEN_SET(0) |
-+ GPTU_CLC_DISR_SET(1);
-+
-+ clk_enable(clk);
-+}
-+
-+int lq_request_timer(unsigned int timer, unsigned int flag,
-+ unsigned long value, unsigned long arg1, unsigned long arg2)
-+{
-+ int ret = 0;
-+ unsigned int con_reg, irnen_reg;
-+ int n, X;
-+
-+ if (timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+ return -EINVAL;
-+
-+ printk(KERN_INFO "request_timer(%d, 0x%08X, %lu)...",
-+ timer, flag, value);
-+
-+ if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT)
-+ value &= 0xFFFF;
-+ else
-+ timer &= ~0x01;
-+
-+ mutex_lock(&timer_dev.gptu_mutex);
-+
-+ /*
-+ * Allocate timer.
-+ */
-+ if (timer < FIRST_TIMER) {
-+ unsigned int mask;
-+ unsigned int shift;
-+ /* This takes care of TIMER1B which is the only choice for Voice TAPI system */
-+ unsigned int offset = TIMER2A;
-+
-+ /*
-+ * Pick up a free timer.
-+ */
-+ if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) {
-+ mask = 1 << offset;
-+ shift = 1;
-+ } else {
-+ mask = 3 << offset;
-+ shift = 2;
-+ }
-+ for (timer = offset;
-+ timer < offset + timer_dev.number_of_timers;
-+ timer += shift, mask <<= shift)
-+ if (!(timer_dev.occupation & mask)) {
-+ timer_dev.occupation |= mask;
-+ break;
-+ }
-+ if (timer >= offset + timer_dev.number_of_timers) {
-+ printk("failed![%d]\n", __LINE__);
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+ return -EINVAL;
-+ } else
-+ ret = timer;
-+ } else {
-+ register unsigned int mask;
-+
-+ /*
-+ * Check if the requested timer is free.
-+ */
-+ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+ if ((timer_dev.occupation & mask)) {
-+ printk("failed![%d] mask %#x, timer_dev.occupation %#x\n",
-+ __LINE__, mask, timer_dev.occupation);
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+ return -EBUSY;
-+ } else {
-+ timer_dev.occupation |= mask;
-+ ret = 0;
-+ }
-+ }
-+
-+ /*
-+ * Prepare control register value.
-+ */
-+ switch (TIMER_FLAG_MASK_EDGE(flag)) {
-+ default:
-+ case TIMER_FLAG_NONE_EDGE:
-+ con_reg = GPTU_CON_EDGE_SET(0x00);
-+ break;
-+ case TIMER_FLAG_RISE_EDGE:
-+ con_reg = GPTU_CON_EDGE_SET(0x01);
-+ break;
-+ case TIMER_FLAG_FALL_EDGE:
-+ con_reg = GPTU_CON_EDGE_SET(0x02);
-+ break;
-+ case TIMER_FLAG_ANY_EDGE:
-+ con_reg = GPTU_CON_EDGE_SET(0x03);
-+ break;
-+ }
-+ if (TIMER_FLAG_MASK_TYPE(flag) == TIMER_FLAG_TIMER)
-+ con_reg |=
-+ TIMER_FLAG_MASK_SRC(flag) ==
-+ TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) :
-+ GPTU_CON_SRC_EXT_SET(0);
-+ else
-+ con_reg |=
-+ TIMER_FLAG_MASK_SRC(flag) ==
-+ TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) :
-+ GPTU_CON_SRC_EG_SET(0);
-+ con_reg |=
-+ TIMER_FLAG_MASK_SYNC(flag) ==
-+ TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) :
-+ GPTU_CON_SYNC_SET(1);
-+ con_reg |=
-+ TIMER_FLAG_MASK_INVERT(flag) ==
-+ TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1);
-+ con_reg |=
-+ TIMER_FLAG_MASK_SIZE(flag) ==
-+ TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) :
-+ GPTU_CON_EXT_SET(1);
-+ con_reg |=
-+ TIMER_FLAG_MASK_STOP(flag) ==
-+ TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0);
-+ con_reg |=
-+ TIMER_FLAG_MASK_TYPE(flag) ==
-+ TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) :
-+ GPTU_CON_CNT_SET(1);
-+ con_reg |=
-+ TIMER_FLAG_MASK_DIR(flag) ==
-+ TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0);
-+
-+ /*
-+ * Fill up running data.
-+ */
-+ timer_dev.timer[timer - FIRST_TIMER].flag = flag;
-+ timer_dev.timer[timer - FIRST_TIMER].arg1 = arg1;
-+ timer_dev.timer[timer - FIRST_TIMER].arg2 = arg2;
-+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+ timer_dev.timer[timer - FIRST_TIMER + 1].flag = flag;
-+
-+ /*
-+ * Enable GPTU module.
-+ */
-+ if (!timer_dev.f_gptu_on) {
-+ lq_enable_gptu();
-+ timer_dev.f_gptu_on = 1;
-+ }
-+
-+ /*
-+ * Enable IRQ.
-+ */
-+ if (TIMER_FLAG_MASK_HANDLE(flag) != TIMER_FLAG_NO_HANDLE) {
-+ if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL)
-+ timer_dev.timer[timer - FIRST_TIMER].arg1 =
-+ (unsigned long) find_task_by_vpid((int) arg1);
-+
-+ irnen_reg = 1 << (timer - FIRST_TIMER);
-+
-+ if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL
-+ || (TIMER_FLAG_MASK_HANDLE(flag) ==
-+ TIMER_FLAG_CALLBACK_IN_IRQ
-+ && timer_dev.timer[timer - FIRST_TIMER].arg1)) {
-+ enable_irq(timer_dev.timer[timer - FIRST_TIMER].irq);
-+ timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 1;
-+ }
-+ } else
-+ irnen_reg = 0;
-+
-+ /*
-+ * Write config register, reload value and enable interrupt.
-+ */
-+ n = timer >> 1;
-+ X = timer & 0x01;
-+ *LQ_GPTU_CON(n, X) = con_reg;
-+ *LQ_GPTU_RELOAD(n, X) = value;
-+ /* printk("reload value = %d\n", (u32)value); */
-+ *LQ_GPTU_IRNEN |= irnen_reg;
-+
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+ printk("successful!\n");
-+ return ret;
-+}
-+EXPORT_SYMBOL(lq_request_timer);
-+
-+int lq_free_timer(unsigned int timer)
-+{
-+ unsigned int flag;
-+ unsigned int mask;
-+ int n, X;
-+
-+ if (!timer_dev.f_gptu_on)
-+ return -EINVAL;
-+
-+ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+ return -EINVAL;
-+
-+ mutex_lock(&timer_dev.gptu_mutex);
-+
-+ flag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+ timer &= ~0x01;
-+
-+ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+ if (((timer_dev.occupation & mask) ^ mask)) {
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+ return -EINVAL;
-+ }
-+
-+ n = timer >> 1;
-+ X = timer & 0x01;
-+
-+ if (GPTU_CON_EN(n, X))
-+ *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1);
-+
-+ *LQ_GPTU_IRNEN &= ~GPTU_IRNEN_TC_SET(n, X, 1);
-+ *LQ_GPTU_IRNCR |= GPTU_IRNCR_TC_SET(n, X, 1);
-+
-+ if (timer_dev.timer[timer - FIRST_TIMER].f_irq_on) {
-+ disable_irq(timer_dev.timer[timer - FIRST_TIMER].irq);
-+ timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 0;
-+ }
-+
-+ timer_dev.occupation &= ~mask;
-+ if (!timer_dev.occupation && timer_dev.f_gptu_on) {
-+ lq_disable_gptu();
-+ timer_dev.f_gptu_on = 0;
-+ }
-+
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(lq_free_timer);
-+
-+int lq_start_timer(unsigned int timer, int is_resume)
-+{
-+ unsigned int flag;
-+ unsigned int mask;
-+ int n, X;
-+
-+ if (!timer_dev.f_gptu_on)
-+ return -EINVAL;
-+
-+ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+ return -EINVAL;
-+
-+ mutex_lock(&timer_dev.gptu_mutex);
-+
-+ flag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+ timer &= ~0x01;
-+
-+ mask = (TIMER_FLAG_MASK_SIZE(flag) ==
-+ TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+ if (((timer_dev.occupation & mask) ^ mask)) {
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+ return -EINVAL;
-+ }
-+
-+ n = timer >> 1;
-+ X = timer & 0x01;
-+
-+ *LQ_GPTU_RUN(n, X) = GPTU_RUN_RL_SET(!is_resume) | GPTU_RUN_SEN_SET(1);
-+
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(lq_start_timer);
-+
-+int lq_stop_timer(unsigned int timer)
-+{
-+ unsigned int flag;
-+ unsigned int mask;
-+ int n, X;
-+
-+ if (!timer_dev.f_gptu_on)
-+ return -EINVAL;
-+
-+ if (timer < FIRST_TIMER
-+ || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+ return -EINVAL;
-+
-+ mutex_lock(&timer_dev.gptu_mutex);
-+
-+ flag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+ timer &= ~0x01;
-+
-+ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+ if (((timer_dev.occupation & mask) ^ mask)) {
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+ return -EINVAL;
-+ }
-+
-+ n = timer >> 1;
-+ X = timer & 0x01;
-+
-+ *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1);
-+
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(lq_stop_timer);
-+
-+int lq_reset_counter_flags(u32 timer, u32 flags)
-+{
-+ unsigned int oflag;
-+ unsigned int mask, con_reg;
-+ int n, X;
-+
-+ if (!timer_dev.f_gptu_on)
-+ return -EINVAL;
-+
-+ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+ return -EINVAL;
-+
-+ mutex_lock(&timer_dev.gptu_mutex);
-+
-+ oflag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+ if (TIMER_FLAG_MASK_SIZE(oflag) != TIMER_FLAG_16BIT)
-+ timer &= ~0x01;
-+
-+ mask = (TIMER_FLAG_MASK_SIZE(oflag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+ if (((timer_dev.occupation & mask) ^ mask)) {
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+ return -EINVAL;
-+ }
-+
-+ switch (TIMER_FLAG_MASK_EDGE(flags)) {
-+ default:
-+ case TIMER_FLAG_NONE_EDGE:
-+ con_reg = GPTU_CON_EDGE_SET(0x00);
-+ break;
-+ case TIMER_FLAG_RISE_EDGE:
-+ con_reg = GPTU_CON_EDGE_SET(0x01);
-+ break;
-+ case TIMER_FLAG_FALL_EDGE:
-+ con_reg = GPTU_CON_EDGE_SET(0x02);
-+ break;
-+ case TIMER_FLAG_ANY_EDGE:
-+ con_reg = GPTU_CON_EDGE_SET(0x03);
-+ break;
-+ }
-+ if (TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER)
-+ con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : GPTU_CON_SRC_EXT_SET(0);
-+ else
-+ con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : GPTU_CON_SRC_EG_SET(0);
-+ con_reg |= TIMER_FLAG_MASK_SYNC(flags) == TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : GPTU_CON_SYNC_SET(1);
-+ con_reg |= TIMER_FLAG_MASK_INVERT(flags) == TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1);
-+ con_reg |= TIMER_FLAG_MASK_SIZE(flags) == TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : GPTU_CON_EXT_SET(1);
-+ con_reg |= TIMER_FLAG_MASK_STOP(flags) == TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0);
-+ con_reg |= TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : GPTU_CON_CNT_SET(1);
-+ con_reg |= TIMER_FLAG_MASK_DIR(flags) == TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0);
-+
-+ timer_dev.timer[timer - FIRST_TIMER].flag = flags;
-+ if (TIMER_FLAG_MASK_SIZE(flags) != TIMER_FLAG_16BIT)
-+ timer_dev.timer[timer - FIRST_TIMER + 1].flag = flags;
-+
-+ n = timer >> 1;
-+ X = timer & 0x01;
-+
-+ *LQ_GPTU_CON(n, X) = con_reg;
-+ smp_wmb();
-+ printk(KERN_INFO "[%s]: counter%d oflags %#x, nflags %#x, GPTU_CON %#x\n", __func__, timer, oflag, flags, *LQ_GPTU_CON(n, X));
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+ return 0;
-+}
-+EXPORT_SYMBOL(lq_reset_counter_flags);
-+
-+int lq_get_count_value(unsigned int timer, unsigned long *value)
-+{
-+ unsigned int flag;
-+ unsigned int mask;
-+ int n, X;
-+
-+ if (!timer_dev.f_gptu_on)
-+ return -EINVAL;
-+
-+ if (timer < FIRST_TIMER
-+ || timer >= FIRST_TIMER + timer_dev.number_of_timers)
-+ return -EINVAL;
-+
-+ mutex_lock(&timer_dev.gptu_mutex);
-+
-+ flag = timer_dev.timer[timer - FIRST_TIMER].flag;
-+ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT)
-+ timer &= ~0x01;
-+
-+ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer;
-+ if (((timer_dev.occupation & mask) ^ mask)) {
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+ return -EINVAL;
-+ }
-+
-+ n = timer >> 1;
-+ X = timer & 0x01;
-+
-+ *value = *LQ_GPTU_COUNT(n, X);
-+
-+ mutex_unlock(&timer_dev.gptu_mutex);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(lq_get_count_value);
-+
-+u32 lq_cal_divider(unsigned long freq)
-+{
-+ u64 module_freq, fpi = ltq_get_fpi_bus_clock(2);
-+ u32 clock_divider = 1;
-+ module_freq = fpi * 1000;
-+ do_div(module_freq, clock_divider * freq);
-+ return module_freq;
-+}
-+EXPORT_SYMBOL(lq_cal_divider);
-+
-+int lq_set_timer(unsigned int timer, unsigned int freq, int is_cyclic,
-+ int is_ext_src, unsigned int handle_flag, unsigned long arg1,
-+ unsigned long arg2)
-+{
-+ unsigned long divider;
-+ unsigned int flag;
-+
-+ divider = lq_cal_divider(freq);
-+ if (divider == 0)
-+ return -EINVAL;
-+ flag = ((divider & ~0xFFFF) ? TIMER_FLAG_32BIT : TIMER_FLAG_16BIT)
-+ | (is_cyclic ? TIMER_FLAG_CYCLIC : TIMER_FLAG_ONCE)
-+ | (is_ext_src ? TIMER_FLAG_EXT_SRC : TIMER_FLAG_INT_SRC)
-+ | TIMER_FLAG_TIMER | TIMER_FLAG_DOWN
-+ | TIMER_FLAG_MASK_HANDLE(handle_flag);
-+
-+ printk(KERN_INFO "lq_set_timer(%d, %d), divider = %lu\n",
-+ timer, freq, divider);
-+ return lq_request_timer(timer, flag, divider, arg1, arg2);
-+}
-+EXPORT_SYMBOL(lq_set_timer);
-+
-+int lq_set_counter(unsigned int timer, unsigned int flag, u32 reload,
-+ unsigned long arg1, unsigned long arg2)
-+{
-+ printk(KERN_INFO "lq_set_counter(%d, %#x, %d)\n", timer, flag, reload);
-+ return lq_request_timer(timer, flag, reload, arg1, arg2);
-+}
-+EXPORT_SYMBOL(lq_set_counter);
-+
-+static long gptu_ioctl(struct file *file, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ int ret;
-+ struct gptu_ioctl_param param;
-+
-+ if (!access_ok(VERIFY_READ, arg, sizeof(struct gptu_ioctl_param)))
-+ return -EFAULT;
-+ copy_from_user(¶m, (void *) arg, sizeof(param));
-+
-+ if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER
-+ || GPTU_SET_COUNTER) && param.timer < 2)
-+ || cmd == GPTU_GET_COUNT_VALUE || cmd == GPTU_CALCULATE_DIVIDER)
-+ && !access_ok(VERIFY_WRITE, arg,
-+ sizeof(struct gptu_ioctl_param)))
-+ return -EFAULT;
-+
-+ switch (cmd) {
-+ case GPTU_REQUEST_TIMER:
-+ ret = lq_request_timer(param.timer, param.flag, param.value,
-+ (unsigned long) param.pid,
-+ (unsigned long) param.sig);
-+ if (ret > 0) {
-+ copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+ timer, &ret, sizeof(&ret));
-+ ret = 0;
-+ }
-+ break;
-+ case GPTU_FREE_TIMER:
-+ ret = lq_free_timer(param.timer);
-+ break;
-+ case GPTU_START_TIMER:
-+ ret = lq_start_timer(param.timer, param.flag);
-+ break;
-+ case GPTU_STOP_TIMER:
-+ ret = lq_stop_timer(param.timer);
-+ break;
-+ case GPTU_GET_COUNT_VALUE:
-+ ret = lq_get_count_value(param.timer, ¶m.value);
-+ if (!ret)
-+ copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+ value, ¶m.value,
-+ sizeof(param.value));
-+ break;
-+ case GPTU_CALCULATE_DIVIDER:
-+ param.value = lq_cal_divider(param.value);
-+ if (param.value == 0)
-+ ret = -EINVAL;
-+ else {
-+ copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+ value, ¶m.value,
-+ sizeof(param.value));
-+ ret = 0;
-+ }
-+ break;
-+ case GPTU_SET_TIMER:
-+ ret = lq_set_timer(param.timer, param.value,
-+ TIMER_FLAG_MASK_STOP(param.flag) !=
-+ TIMER_FLAG_ONCE ? 1 : 0,
-+ TIMER_FLAG_MASK_SRC(param.flag) ==
-+ TIMER_FLAG_EXT_SRC ? 1 : 0,
-+ TIMER_FLAG_MASK_HANDLE(param.flag) ==
-+ TIMER_FLAG_SIGNAL ? TIMER_FLAG_SIGNAL :
-+ TIMER_FLAG_NO_HANDLE,
-+ (unsigned long) param.pid,
-+ (unsigned long) param.sig);
-+ if (ret > 0) {
-+ copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+ timer, &ret, sizeof(&ret));
-+ ret = 0;
-+ }
-+ break;
-+ case GPTU_SET_COUNTER:
-+ lq_set_counter(param.timer, param.flag, param.value, 0, 0);
-+ if (ret > 0) {
-+ copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+ timer, &ret, sizeof(&ret));
-+ ret = 0;
-+ }
-+ break;
-+ default:
-+ ret = -ENOTTY;
-+ }
-+
-+ return ret;
-+}
-+
-+static int gptu_open(struct inode *inode, struct file *file)
-+{
-+ return 0;
-+}
-+
-+static int gptu_release(struct inode *inode, struct file *file)
-+{
-+ return 0;
-+}
-+
-+int __init lq_gptu_init(void)
-+{
-+ int ret;
-+ unsigned int i;
-+
-+ ltq_w32(0, LQ_GPTU_IRNEN);
-+ ltq_w32(0xfff, LQ_GPTU_IRNCR);
-+
-+ memset(&timer_dev, 0, sizeof(timer_dev));
-+ mutex_init(&timer_dev.gptu_mutex);
-+
-+ lq_enable_gptu();
-+ timer_dev.number_of_timers = GPTU_ID_CFG * 2;
-+ lq_disable_gptu();
-+ if (timer_dev.number_of_timers > MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2)
-+ timer_dev.number_of_timers = MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2;
-+ printk(KERN_INFO "gptu: totally %d 16-bit timers/counters\n", timer_dev.number_of_timers);
-+
-+ ret = misc_register(&gptu_miscdev);
-+ if (ret) {
-+ printk(KERN_ERR "gptu: can't misc_register, get error %d\n", -ret);
-+ return ret;
-+ } else {
-+ printk(KERN_INFO "gptu: misc_register on minor %d\n", gptu_miscdev.minor);
-+ }
-+
-+ for (i = 0; i < timer_dev.number_of_timers; i++) {
-+ ret = request_irq(TIMER_INTERRUPT + i, timer_irq_handler, IRQF_TIMER, gptu_miscdev.name, &timer_dev.timer[i]);
-+ if (ret) {
-+ for (; i >= 0; i--)
-+ free_irq(TIMER_INTERRUPT + i, &timer_dev.timer[i]);
-+ misc_deregister(&gptu_miscdev);
-+ printk(KERN_ERR "gptu: failed in requesting irq (%d), get error %d\n", i, -ret);
-+ return ret;
-+ } else {
-+ timer_dev.timer[i].irq = TIMER_INTERRUPT + i;
-+ disable_irq(timer_dev.timer[i].irq);
-+ printk(KERN_INFO "gptu: succeeded to request irq %d\n", timer_dev.timer[i].irq);
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+void __exit lq_gptu_exit(void)
-+{
-+ unsigned int i;
-+
-+ for (i = 0; i < timer_dev.number_of_timers; i++) {
-+ if (timer_dev.timer[i].f_irq_on)
-+ disable_irq(timer_dev.timer[i].irq);
-+ free_irq(timer_dev.timer[i].irq, &timer_dev.timer[i]);
-+ }
-+ lq_disable_gptu();
-+ misc_deregister(&gptu_miscdev);
-+}
-+
-+module_init(lq_gptu_init);
-+module_exit(lq_gptu_exit);
--- /dev/null
+From 16e349f80eec982f301265bebd66fd08f3b0dce1 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 30 Sep 2011 14:37:36 +0200
+Subject: [PATCH 47/73] MIPS: lantiq: adds dwc_otg
+
+---
+ drivers/usb/Kconfig | 2 +
+ drivers/usb/Makefile | 2 +
+ drivers/usb/core/hub.c | 4 +-
+ drivers/usb/dwc_otg/Kconfig | 37 +
+ drivers/usb/dwc_otg/Makefile | 39 +
+ drivers/usb/dwc_otg/dwc_otg_attr.c | 802 ++++++++
+ drivers/usb/dwc_otg/dwc_otg_attr.h | 67 +
+ drivers/usb/dwc_otg/dwc_otg_cil.c | 3025 +++++++++++++++++++++++++++++++
+ drivers/usb/dwc_otg/dwc_otg_cil.h | 911 ++++++++++
+ drivers/usb/dwc_otg/dwc_otg_cil_ifx.h | 58 +
+ drivers/usb/dwc_otg/dwc_otg_cil_intr.c | 708 ++++++++
+ drivers/usb/dwc_otg/dwc_otg_driver.c | 1274 +++++++++++++
+ drivers/usb/dwc_otg/dwc_otg_driver.h | 84 +
+ drivers/usb/dwc_otg/dwc_otg_hcd.c | 2870 +++++++++++++++++++++++++++++
+ drivers/usb/dwc_otg/dwc_otg_hcd.h | 676 +++++++
+ drivers/usb/dwc_otg/dwc_otg_hcd_intr.c | 1841 +++++++++++++++++++
+ drivers/usb/dwc_otg/dwc_otg_hcd_queue.c | 794 ++++++++
+ drivers/usb/dwc_otg/dwc_otg_ifx.c | 100 +
+ drivers/usb/dwc_otg/dwc_otg_ifx.h | 85 +
+ drivers/usb/dwc_otg/dwc_otg_plat.h | 269 +++
+ drivers/usb/dwc_otg/dwc_otg_regs.h | 1797 ++++++++++++++++++
+ 21 files changed, 15443 insertions(+), 2 deletions(-)
+ create mode 100644 drivers/usb/dwc_otg/Kconfig
+ create mode 100644 drivers/usb/dwc_otg/Makefile
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_attr.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_attr.h
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_cil.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_cil.h
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_cil_ifx.h
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_cil_intr.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_driver.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_driver.h
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd.h
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd_queue.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_ifx.c
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_ifx.h
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_plat.h
+ create mode 100644 drivers/usb/dwc_otg/dwc_otg_regs.h
+
+diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
+index 791f11b..1eafa7a 100644
+--- a/drivers/usb/Kconfig
++++ b/drivers/usb/Kconfig
+@@ -129,6 +129,8 @@ source "drivers/usb/wusbcore/Kconfig"
+
+ source "drivers/usb/host/Kconfig"
+
++source "drivers/usb/dwc_otg/Kconfig"
++
+ source "drivers/usb/musb/Kconfig"
+
+ source "drivers/usb/renesas_usbhs/Kconfig"
+diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
+index 75eca76..7fe8e83 100644
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -30,6 +30,8 @@ obj-$(CONFIG_USB_C67X00_HCD) += c67x00/
+
+ obj-$(CONFIG_USB_WUSB) += wusbcore/
+
++obj-$(CONFIG_DWC_OTG) += dwc_otg/
++
+ obj-$(CONFIG_USB_ACM) += class/
+ obj-$(CONFIG_USB_PRINTER) += class/
+ obj-$(CONFIG_USB_WDM) += class/
+diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
+index 7978146..6a7df52 100644
+--- a/drivers/usb/core/hub.c
++++ b/drivers/usb/core/hub.c
+@@ -2935,11 +2935,11 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
+ udev->ttport = hdev->ttport;
+ } else if (udev->speed != USB_SPEED_HIGH
+ && hdev->speed == USB_SPEED_HIGH) {
+- if (!hub->tt.hub) {
++/* if (!hub->tt.hub) {
+ dev_err(&udev->dev, "parent hub has no TT\n");
+ retval = -EINVAL;
+ goto fail;
+- }
++ }*/
+ udev->tt = &hub->tt;
+ udev->ttport = port1;
+ }
+diff --git a/drivers/usb/dwc_otg/Kconfig b/drivers/usb/dwc_otg/Kconfig
+new file mode 100644
+index 0000000..e018490
+--- /dev/null
++++ b/drivers/usb/dwc_otg/Kconfig
+@@ -0,0 +1,37 @@
++config DWC_OTG
++ tristate "Synopsis DWC_OTG support"
++ depends on USB
++ help
++ This driver supports Synopsis DWC_OTG IP core
++ embebbed on many SOCs (ralink, infineon, etc)
++
++choice
++ prompt "USB Operation Mode"
++ depends on DWC_OTG
++ default DWC_OTG_HOST_ONLY
++
++config DWC_OTG_HOST_ONLY
++ bool "HOST ONLY MODE"
++ depends on DWC_OTG
++
++#config DWC_OTG_DEVICE_ONLY
++# bool "DEVICE ONLY MODE"
++# depends on DWC_OTG
++endchoice
++
++choice
++ prompt "Platform"
++ depends on DWC_OTG
++ default DWC_OTG_LANTIQ
++
++config DWC_OTG_LANTIQ
++ bool "Lantiq"
++ depends on LANTIQ
++ help
++ Danube USB Host Controller
++ platform support
++endchoice
++
++config DWC_OTG_DEBUG
++ bool "Enable debug mode"
++ depends on DWC_OTG
+diff --git a/drivers/usb/dwc_otg/Makefile b/drivers/usb/dwc_otg/Makefile
+new file mode 100644
+index 0000000..d4d2355
+--- /dev/null
++++ b/drivers/usb/dwc_otg/Makefile
+@@ -0,0 +1,39 @@
++#
++# Makefile for DWC_otg Highspeed USB controller driver
++#
++
++ifeq ($(CONFIG_DWC_OTG_DEBUG),y)
++EXTRA_CFLAGS += -DDEBUG
++endif
++
++# Use one of the following flags to compile the software in host-only or
++# device-only mode based on the configuration selected by the user
++ifeq ($(CONFIG_DWC_OTG_HOST_ONLY),y)
++ EXTRA_CFLAGS += -DDWC_OTG_HOST_ONLY -DDWC_HOST_ONLY
++ EXTRA_CFLAGS += -DDWC_OTG_EN_ISOC -DDWC_EN_ISOC
++else ifeq ($(CONFIG_DWC_OTG_DEVICE_ONLY),y)
++ EXTRA_CFLAGS += -DDWC_OTG_DEVICE_ONLY
++else
++ EXTRA_CFLAGS += -DDWC_OTG_MODE
++endif
++
++# EXTRA_CFLAGS += -DDWC_HS_ELECT_TST
++# EXTRA_CFLAGS += -DDWC_OTG_EXT_CHG_PUMP
++
++ifeq ($(CONFIG_DWC_OTG_LANTIQ),y)
++ EXTRA_CFLAGS += -Dlinux -D__LINUX__ -DDWC_OTG_IFX -DDWC_OTG_HOST_ONLY -DDWC_HOST_ONLY -D__KERNEL__
++endif
++ifeq ($(CONFIG_DWC_OTG_LANTIQ),m)
++ EXTRA_CFLAGS += -Dlinux -D__LINUX__ -DDWC_OTG_IFX -DDWC_HOST_ONLY -DMODULE -D__KERNEL__ -DDEBUG
++endif
++
++obj-$(CONFIG_DWC_OTG) := dwc_otg.o
++dwc_otg-objs := dwc_otg_hcd.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o
++#dwc_otg-objs += dwc_otg_pcd.o dwc_otg_pcd_intr.o
++dwc_otg-objs += dwc_otg_attr.o
++dwc_otg-objs += dwc_otg_cil.o dwc_otg_cil_intr.o
++dwc_otg-objs += dwc_otg_ifx.o
++dwc_otg-objs += dwc_otg_driver.o
++
++#obj-$(CONFIG_DWC_OTG_IFX) := dwc_otg_ifx.o
++#dwc_otg_ifx-objs := dwc_otg_ifx.o
+diff --git a/drivers/usb/dwc_otg/dwc_otg_attr.c b/drivers/usb/dwc_otg/dwc_otg_attr.c
+new file mode 100644
+index 0000000..4675a5c
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_attr.c
+@@ -0,0 +1,802 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_attr.c $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 537387 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ *
++ * The diagnostic interface will provide access to the controller for
++ * bringing up the hardware and testing. The Linux driver attributes
++ * feature will be used to provide the Linux Diagnostic
++ * Interface. These attributes are accessed through sysfs.
++ */
++
++/** @page "Linux Module Attributes"
++ *
++ * The Linux module attributes feature is used to provide the Linux
++ * Diagnostic Interface. These attributes are accessed through sysfs.
++ * The diagnostic interface will provide access to the controller for
++ * bringing up the hardware and testing.
++
++
++ The following table shows the attributes.
++ <table>
++ <tr>
++ <td><b> Name</b></td>
++ <td><b> Description</b></td>
++ <td><b> Access</b></td>
++ </tr>
++
++ <tr>
++ <td> mode </td>
++ <td> Returns the current mode: 0 for device mode, 1 for host mode</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hnpcapable </td>
++ <td> Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register.
++ Read returns the current value.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> srpcapable </td>
++ <td> Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register.
++ Read returns the current value.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> hnp </td>
++ <td> Initiates the Host Negotiation Protocol. Read returns the status.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> srp </td>
++ <td> Initiates the Session Request Protocol. Read returns the status.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> buspower </td>
++ <td> Gets or sets the Power State of the bus (0 - Off or 1 - On)</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> bussuspend </td>
++ <td> Suspends the USB bus.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> busconnected </td>
++ <td> Gets the connection status of the bus</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> gotgctl </td>
++ <td> Gets or sets the Core Control Status Register.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gusbcfg </td>
++ <td> Gets or sets the Core USB Configuration Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> grxfsiz </td>
++ <td> Gets or sets the Receive FIFO Size Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gnptxfsiz </td>
++ <td> Gets or sets the non-periodic Transmit Size Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gpvndctl </td>
++ <td> Gets or sets the PHY Vendor Control Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> ggpio </td>
++ <td> Gets the value in the lower 16-bits of the General Purpose IO Register
++ or sets the upper 16 bits.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> guid </td>
++ <td> Gets or sets the value of the User ID Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gsnpsid </td>
++ <td> Gets the value of the Synopsys ID Regester</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> devspeed </td>
++ <td> Gets or sets the device speed setting in the DCFG register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> enumspeed </td>
++ <td> Gets the device enumeration Speed.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hptxfsiz </td>
++ <td> Gets the value of the Host Periodic Transmit FIFO</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hprt0 </td>
++ <td> Gets or sets the value in the Host Port Control and Status Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> regoffset </td>
++ <td> Sets the register offset for the next Register Access</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> regvalue </td>
++ <td> Gets or sets the value of the register at the offset in the regoffset attribute.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> remote_wakeup </td>
++ <td> On read, shows the status of Remote Wakeup. On write, initiates a remote
++ wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote
++ Wakeup signalling bit in the Device Control Register is set for 1
++ milli-second.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> regdump </td>
++ <td> Dumps the contents of core registers.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hcddump </td>
++ <td> Dumps the current HCD state.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hcd_frrem </td>
++ <td> Shows the average value of the Frame Remaining
++ field in the Host Frame Number/Frame Remaining register when an SOF interrupt
++ occurs. This can be used to determine the average interrupt latency. Also
++ shows the average Frame Remaining value for start_transfer and the "a" and
++ "b" sample points. The "a" and "b" sample points may be used during debugging
++ bto determine how long it takes to execute a section of the HCD code.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> rd_reg_test </td>
++ <td> Displays the time required to read the GNPTXFSIZ register many times
++ (the output shows the number of times the register is read).
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> wr_reg_test </td>
++ <td> Displays the time required to write the GNPTXFSIZ register many times
++ (the output shows the number of times the register is written).
++ <td> Read</td>
++ </tr>
++
++ </table>
++
++ Example usage:
++ To get the current mode:
++ cat /sys/devices/lm0/mode
++
++ To power down the USB:
++ echo 0 > /sys/devices/lm0/buspower
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/types.h>
++#include <linux/stat.h> /* permission constants */
++
++#include <asm/io.h>
++
++#include "dwc_otg_plat.h"
++#include "dwc_otg_attr.h"
++#include "dwc_otg_driver.h"
++// #include "dwc_otg_pcd.h"
++#include "dwc_otg_hcd.h"
++
++// 20070316, winder added.
++#ifndef SZ_256K
++#define SZ_256K 0x00040000
++#endif
++
++/*
++ * MACROs for defining sysfs attribute
++ */
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
++ uint32_t val; \
++ val = dwc_read_reg32 (_addr_); \
++ val = (val & (_mask_)) >> _shift_; \
++ return sprintf (buf, "%s = 0x%x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, const char *buf, size_t count) \
++{ \
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
++ uint32_t set = simple_strtoul(buf, NULL, 16); \
++ uint32_t clear = set; \
++ clear = ((~clear) << _shift_) & _mask_; \
++ set = (set << _shift_) & _mask_; \
++ dev_dbg(_dev, "Storing Address=0x%08x Set=0x%08x Clear=0x%08x\n", (uint32_t)_addr_, set, clear); \
++ dwc_modify_reg32(_addr_, clear, set); \
++ return count; \
++}
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
++
++/*
++ * MACROs for defining sysfs attribute for 32-bit registers
++ */
++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
++ uint32_t val; \
++ val = dwc_read_reg32 (_addr_); \
++ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, const char *buf, size_t count) \
++{ \
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
++ uint32_t val = simple_strtoul(buf, NULL, 16); \
++ dev_dbg(_dev, "Storing Address=0x%08x Val=0x%08x\n", (uint32_t)_addr_, val); \
++ dwc_write_reg32(_addr_, val); \
++ return count; \
++}
++
++#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
++
++#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
++
++
++/** @name Functions for Show/Store of Attributes */
++/**@{*/
++
++/**
++ * Show the register offset of the Register Access.
++ */
++static ssize_t regoffset_show( struct device *_dev, struct device_attribute *attr, char *buf)
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++ return snprintf(buf, sizeof("0xFFFFFFFF\n")+1,"0x%08x\n", otg_dev->reg_offset);
++}
++
++/**
++ * Set the register offset for the next Register Access Read/Write
++ */
++static ssize_t regoffset_store( struct device *_dev, struct device_attribute *attr, const char *buf,
++ size_t count )
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++ uint32_t offset = simple_strtoul(buf, NULL, 16);
++ //dev_dbg(_dev, "Offset=0x%08x\n", offset);
++ if (offset < SZ_256K ) {
++ otg_dev->reg_offset = offset;
++ }
++ else {
++ dev_err( _dev, "invalid offset\n" );
++ }
++
++ return count;
++}
++DEVICE_ATTR(regoffset, S_IRUGO|S_IWUSR, regoffset_show, regoffset_store);
++
++/**
++ * Show the value of the register at the offset in the reg_offset
++ * attribute.
++ */
++static ssize_t regvalue_show( struct device *_dev, struct device_attribute *attr, char *buf)
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++ uint32_t val;
++ volatile uint32_t *addr;
++
++ if (otg_dev->reg_offset != 0xFFFFFFFF && 0 != otg_dev->base) {
++ /* Calculate the address */
++ addr = (uint32_t*)(otg_dev->reg_offset +
++ (uint8_t*)otg_dev->base);
++ //dev_dbg(_dev, "@0x%08x\n", (unsigned)addr);
++ val = dwc_read_reg32( addr );
++ return snprintf(buf, sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n")+1,
++ "Reg@0x%06x = 0x%08x\n",
++ otg_dev->reg_offset, val);
++ }
++ else {
++ dev_err(_dev, "Invalid offset (0x%0x)\n",
++ otg_dev->reg_offset);
++ return sprintf(buf, "invalid offset\n" );
++ }
++}
++
++/**
++ * Store the value in the register at the offset in the reg_offset
++ * attribute.
++ *
++ */
++static ssize_t regvalue_store( struct device *_dev, struct device_attribute *attr, const char *buf,
++ size_t count )
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++ volatile uint32_t * addr;
++ uint32_t val = simple_strtoul(buf, NULL, 16);
++ //dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val);
++ if (otg_dev->reg_offset != 0xFFFFFFFF && 0 != otg_dev->base) {
++ /* Calculate the address */
++ addr = (uint32_t*)(otg_dev->reg_offset +
++ (uint8_t*)otg_dev->base);
++ //dev_dbg(_dev, "@0x%08x\n", (unsigned)addr);
++ dwc_write_reg32( addr, val );
++ }
++ else {
++ dev_err(_dev, "Invalid Register Offset (0x%08x)\n",
++ otg_dev->reg_offset);
++ }
++ return count;
++}
++DEVICE_ATTR(regvalue, S_IRUGO|S_IWUSR, regvalue_show, regvalue_store);
++
++/*
++ * Attributes
++ */
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<20),20,"Mode");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<9),9,"Mode");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<8),8,"Mode");
++
++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected,otg_dev->core_if->host_if->hprt0,0x01,0,"Bus Connected");
++
++DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl,&(otg_dev->core_if->core_global_regs->gotgctl),"GOTGCTL");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg,&(otg_dev->core_if->core_global_regs->gusbcfg),"GUSBCFG");
++DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz,&(otg_dev->core_if->core_global_regs->grxfsiz),"GRXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz,&(otg_dev->core_if->core_global_regs->gnptxfsiz),"GNPTXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl,&(otg_dev->core_if->core_global_regs->gpvndctl),"GPVNDCTL");
++DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio,&(otg_dev->core_if->core_global_regs->ggpio),"GGPIO");
++DWC_OTG_DEVICE_ATTR_REG32_RW(guid,&(otg_dev->core_if->core_global_regs->guid),"GUID");
++DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid,&(otg_dev->core_if->core_global_regs->gsnpsid),"GSNPSID");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dcfg),0x3,0,"Device Speed");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dsts),0x6,1,"Device Enumeration Speed");
++
++DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz,&(otg_dev->core_if->core_global_regs->hptxfsiz),"HPTXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0,otg_dev->core_if->host_if->hprt0,"HPRT0");
++
++
++/**
++ * @todo Add code to initiate the HNP.
++ */
++/**
++ * Show the HNP status bit
++ */
++static ssize_t hnp_show( struct device *_dev, struct device_attribute *attr, char *buf)
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++ gotgctl_data_t val;
++ val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl));
++ return sprintf (buf, "HstNegScs = 0x%x\n", val.b.hstnegscs);
++}
++
++/**
++ * Set the HNP Request bit
++ */
++static ssize_t hnp_store( struct device *_dev, struct device_attribute *attr, const char *buf,
++ size_t count )
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++ uint32_t in = simple_strtoul(buf, NULL, 16);
++ uint32_t *addr = (uint32_t *)&(otg_dev->core_if->core_global_regs->gotgctl);
++ gotgctl_data_t mem;
++ mem.d32 = dwc_read_reg32(addr);
++ mem.b.hnpreq = in;
++ dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
++ dwc_write_reg32(addr, mem.d32);
++ return count;
++}
++DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store);
++
++/**
++ * @todo Add code to initiate the SRP.
++ */
++/**
++ * Show the SRP status bit
++ */
++static ssize_t srp_show( struct device *_dev, struct device_attribute *attr, char *buf)
++{
++#ifndef DWC_HOST_ONLY
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++ gotgctl_data_t val;
++ val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl));
++ return sprintf (buf, "SesReqScs = 0x%x\n", val.b.sesreqscs);
++#else
++ return sprintf(buf, "Host Only Mode!\n");
++#endif
++}
++
++/**
++ * Set the SRP Request bit
++ */
++static ssize_t srp_store( struct device *_dev, struct device_attribute *attr, const char *buf,
++ size_t count )
++{
++#ifndef DWC_HOST_ONLY
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++ dwc_otg_pcd_initiate_srp(otg_dev->pcd);
++#endif
++ return count;
++}
++DEVICE_ATTR(srp, 0644, srp_show, srp_store);
++
++/**
++ * @todo Need to do more for power on/off?
++ */
++/**
++ * Show the Bus Power status
++ */
++static ssize_t buspower_show( struct device *_dev, struct device_attribute *attr, char *buf)
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++ hprt0_data_t val;
++ val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0);
++ return sprintf (buf, "Bus Power = 0x%x\n", val.b.prtpwr);
++}
++
++
++/**
++ * Set the Bus Power status
++ */
++static ssize_t buspower_store( struct device *_dev, struct device_attribute *attr, const char *buf,
++ size_t count )
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++ uint32_t on = simple_strtoul(buf, NULL, 16);
++ uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0;
++ hprt0_data_t mem;
++
++ mem.d32 = dwc_read_reg32(addr);
++ mem.b.prtpwr = on;
++
++ //dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
++ dwc_write_reg32(addr, mem.d32);
++
++ return count;
++}
++DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store);
++
++/**
++ * @todo Need to do more for suspend?
++ */
++/**
++ * Show the Bus Suspend status
++ */
++static ssize_t bussuspend_show( struct device *_dev, struct device_attribute *attr, char *buf)
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++ hprt0_data_t val;
++ val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0);
++ return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp);
++}
++
++/**
++ * Set the Bus Suspend status
++ */
++static ssize_t bussuspend_store( struct device *_dev, struct device_attribute *attr, const char *buf,
++ size_t count )
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++ uint32_t in = simple_strtoul(buf, NULL, 16);
++ uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0;
++ hprt0_data_t mem;
++ mem.d32 = dwc_read_reg32(addr);
++ mem.b.prtsusp = in;
++ dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
++ dwc_write_reg32(addr, mem.d32);
++ return count;
++}
++DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store);
++
++/**
++ * Show the status of Remote Wakeup.
++ */
++static ssize_t remote_wakeup_show( struct device *_dev, struct device_attribute *attr, char *buf)
++{
++#ifndef DWC_HOST_ONLY
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++ dctl_data_t val;
++ val.d32 = dwc_read_reg32( &otg_dev->core_if->dev_if->dev_global_regs->dctl);
++ return sprintf( buf, "Remote Wakeup = %d Enabled = %d\n",
++ val.b.rmtwkupsig, otg_dev->pcd->remote_wakeup_enable);
++#else
++ return sprintf(buf, "Host Only Mode!\n");
++#endif
++}
++
++/**
++ * Initiate a remote wakeup of the host. The Device control register
++ * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable
++ * flag is set.
++ *
++ */
++static ssize_t remote_wakeup_store( struct device *_dev, struct device_attribute *attr, const char *buf,
++ size_t count )
++{
++#ifndef DWC_HOST_ONLY
++ uint32_t val = simple_strtoul(buf, NULL, 16);
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++ if (val&1) {
++ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1);
++ }
++ else {
++ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0);
++ }
++#endif
++ return count;
++}
++DEVICE_ATTR(remote_wakeup, S_IRUGO|S_IWUSR, remote_wakeup_show,
++ remote_wakeup_store);
++
++/**
++ * Dump global registers and either host or device registers (depending on the
++ * current mode of the core).
++ */
++static ssize_t regdump_show( struct device *_dev, struct device_attribute *attr, char *buf)
++{
++#ifdef DEBUG
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++ printk("%s otg_dev=0x%p\n", __FUNCTION__, otg_dev);
++
++ dwc_otg_dump_global_registers( otg_dev->core_if);
++ if (dwc_otg_is_host_mode(otg_dev->core_if)) {
++ dwc_otg_dump_host_registers( otg_dev->core_if);
++ } else {
++ dwc_otg_dump_dev_registers( otg_dev->core_if);
++ }
++#endif
++
++ return sprintf( buf, "Register Dump\n" );
++}
++
++DEVICE_ATTR(regdump, S_IRUGO|S_IWUSR, regdump_show, 0);
++
++/**
++ * Dump the current hcd state.
++ */
++static ssize_t hcddump_show( struct device *_dev, struct device_attribute *attr, char *buf)
++{
++#ifndef DWC_DEVICE_ONLY
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++ dwc_otg_hcd_dump_state(otg_dev->hcd);
++#endif
++ return sprintf( buf, "HCD Dump\n" );
++}
++
++DEVICE_ATTR(hcddump, S_IRUGO|S_IWUSR, hcddump_show, 0);
++
++/**
++ * Dump the average frame remaining at SOF. This can be used to
++ * determine average interrupt latency. Frame remaining is also shown for
++ * start transfer and two additional sample points.
++ */
++static ssize_t hcd_frrem_show( struct device *_dev, struct device_attribute *attr, char *buf)
++{
++#ifndef DWC_DEVICE_ONLY
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++ dwc_otg_hcd_dump_frrem(otg_dev->hcd);
++#endif
++ return sprintf( buf, "HCD Dump Frame Remaining\n" );
++}
++
++DEVICE_ATTR(hcd_frrem, S_IRUGO|S_IWUSR, hcd_frrem_show, 0);
++
++/**
++ * Displays the time required to read the GNPTXFSIZ register many times (the
++ * output shows the number of times the register is read).
++ */
++#define RW_REG_COUNT 10000000
++#define MSEC_PER_JIFFIE 1000/HZ
++static ssize_t rd_reg_test_show( struct device *_dev, struct device_attribute *attr, char *buf)
++{
++ int i;
++ int time;
++ int start_jiffies;
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
++ HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
++ start_jiffies = jiffies;
++ for (i = 0; i < RW_REG_COUNT; i++) {
++ dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz);
++ }
++ time = jiffies - start_jiffies;
++ return sprintf( buf, "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
++ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time );
++}
++
++DEVICE_ATTR(rd_reg_test, S_IRUGO|S_IWUSR, rd_reg_test_show, 0);
++
++/**
++ * Displays the time required to write the GNPTXFSIZ register many times (the
++ * output shows the number of times the register is written).
++ */
++static ssize_t wr_reg_test_show( struct device *_dev, struct device_attribute *attr, char *buf)
++{
++ int i;
++ int time;
++ int start_jiffies;
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++ uint32_t reg_val;
++
++ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
++ HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
++ reg_val = dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz);
++ start_jiffies = jiffies;
++ for (i = 0; i < RW_REG_COUNT; i++) {
++ dwc_write_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz, reg_val);
++ }
++ time = jiffies - start_jiffies;
++ return sprintf( buf, "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
++ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time);
++}
++
++DEVICE_ATTR(wr_reg_test, S_IRUGO|S_IWUSR, wr_reg_test_show, 0);
++/**@}*/
++
++/**
++ * Create the device files
++ */
++void dwc_otg_attr_create (struct device *_dev)
++{
++ int retval;
++
++ retval = device_create_file(_dev, &dev_attr_regoffset);
++ retval += device_create_file(_dev, &dev_attr_regvalue);
++ retval += device_create_file(_dev, &dev_attr_mode);
++ retval += device_create_file(_dev, &dev_attr_hnpcapable);
++ retval += device_create_file(_dev, &dev_attr_srpcapable);
++ retval += device_create_file(_dev, &dev_attr_hnp);
++ retval += device_create_file(_dev, &dev_attr_srp);
++ retval += device_create_file(_dev, &dev_attr_buspower);
++ retval += device_create_file(_dev, &dev_attr_bussuspend);
++ retval += device_create_file(_dev, &dev_attr_busconnected);
++ retval += device_create_file(_dev, &dev_attr_gotgctl);
++ retval += device_create_file(_dev, &dev_attr_gusbcfg);
++ retval += device_create_file(_dev, &dev_attr_grxfsiz);
++ retval += device_create_file(_dev, &dev_attr_gnptxfsiz);
++ retval += device_create_file(_dev, &dev_attr_gpvndctl);
++ retval += device_create_file(_dev, &dev_attr_ggpio);
++ retval += device_create_file(_dev, &dev_attr_guid);
++ retval += device_create_file(_dev, &dev_attr_gsnpsid);
++ retval += device_create_file(_dev, &dev_attr_devspeed);
++ retval += device_create_file(_dev, &dev_attr_enumspeed);
++ retval += device_create_file(_dev, &dev_attr_hptxfsiz);
++ retval += device_create_file(_dev, &dev_attr_hprt0);
++ retval += device_create_file(_dev, &dev_attr_remote_wakeup);
++ retval += device_create_file(_dev, &dev_attr_regdump);
++ retval += device_create_file(_dev, &dev_attr_hcddump);
++ retval += device_create_file(_dev, &dev_attr_hcd_frrem);
++ retval += device_create_file(_dev, &dev_attr_rd_reg_test);
++ retval += device_create_file(_dev, &dev_attr_wr_reg_test);
++
++ if(retval != 0)
++ {
++ DWC_PRINT("cannot create sysfs device files.\n");
++ // DWC_PRINT("killing own sysfs device files!\n");
++ dwc_otg_attr_remove(_dev);
++ }
++}
++
++/**
++ * Remove the device files
++ */
++void dwc_otg_attr_remove (struct device *_dev)
++{
++ device_remove_file(_dev, &dev_attr_regoffset);
++ device_remove_file(_dev, &dev_attr_regvalue);
++ device_remove_file(_dev, &dev_attr_mode);
++ device_remove_file(_dev, &dev_attr_hnpcapable);
++ device_remove_file(_dev, &dev_attr_srpcapable);
++ device_remove_file(_dev, &dev_attr_hnp);
++ device_remove_file(_dev, &dev_attr_srp);
++ device_remove_file(_dev, &dev_attr_buspower);
++ device_remove_file(_dev, &dev_attr_bussuspend);
++ device_remove_file(_dev, &dev_attr_busconnected);
++ device_remove_file(_dev, &dev_attr_gotgctl);
++ device_remove_file(_dev, &dev_attr_gusbcfg);
++ device_remove_file(_dev, &dev_attr_grxfsiz);
++ device_remove_file(_dev, &dev_attr_gnptxfsiz);
++ device_remove_file(_dev, &dev_attr_gpvndctl);
++ device_remove_file(_dev, &dev_attr_ggpio);
++ device_remove_file(_dev, &dev_attr_guid);
++ device_remove_file(_dev, &dev_attr_gsnpsid);
++ device_remove_file(_dev, &dev_attr_devspeed);
++ device_remove_file(_dev, &dev_attr_enumspeed);
++ device_remove_file(_dev, &dev_attr_hptxfsiz);
++ device_remove_file(_dev, &dev_attr_hprt0);
++ device_remove_file(_dev, &dev_attr_remote_wakeup);
++ device_remove_file(_dev, &dev_attr_regdump);
++ device_remove_file(_dev, &dev_attr_hcddump);
++ device_remove_file(_dev, &dev_attr_hcd_frrem);
++ device_remove_file(_dev, &dev_attr_rd_reg_test);
++ device_remove_file(_dev, &dev_attr_wr_reg_test);
++}
+diff --git a/drivers/usb/dwc_otg/dwc_otg_attr.h b/drivers/usb/dwc_otg/dwc_otg_attr.h
+new file mode 100644
+index 0000000..4bbf7df
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_attr.h
+@@ -0,0 +1,67 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_attr.h $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 510275 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_OTG_ATTR_H__)
++#define __DWC_OTG_ATTR_H__
++
++/** @file
++ * This file contains the interface to the Linux device attributes.
++ */
++extern struct device_attribute dev_attr_regoffset;
++extern struct device_attribute dev_attr_regvalue;
++
++extern struct device_attribute dev_attr_mode;
++extern struct device_attribute dev_attr_hnpcapable;
++extern struct device_attribute dev_attr_srpcapable;
++extern struct device_attribute dev_attr_hnp;
++extern struct device_attribute dev_attr_srp;
++extern struct device_attribute dev_attr_buspower;
++extern struct device_attribute dev_attr_bussuspend;
++extern struct device_attribute dev_attr_busconnected;
++extern struct device_attribute dev_attr_gotgctl;
++extern struct device_attribute dev_attr_gusbcfg;
++extern struct device_attribute dev_attr_grxfsiz;
++extern struct device_attribute dev_attr_gnptxfsiz;
++extern struct device_attribute dev_attr_gpvndctl;
++extern struct device_attribute dev_attr_ggpio;
++extern struct device_attribute dev_attr_guid;
++extern struct device_attribute dev_attr_gsnpsid;
++extern struct device_attribute dev_attr_devspeed;
++extern struct device_attribute dev_attr_enumspeed;
++extern struct device_attribute dev_attr_hptxfsiz;
++extern struct device_attribute dev_attr_hprt0;
++
++void dwc_otg_attr_create (struct device *_dev);
++void dwc_otg_attr_remove (struct device *_dev);
++
++#endif
+diff --git a/drivers/usb/dwc_otg/dwc_otg_cil.c b/drivers/usb/dwc_otg/dwc_otg_cil.c
+new file mode 100644
+index 0000000..42c69eb
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_cil.c
+@@ -0,0 +1,3025 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_cil.c $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 631780 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ *
++ * The Core Interface Layer provides basic services for accessing and
++ * managing the DWC_otg hardware. These services are used by both the
++ * Host Controller Driver and the Peripheral Controller Driver.
++ *
++ * The CIL manages the memory map for the core so that the HCD and PCD
++ * don't have to do this separately. It also handles basic tasks like
++ * reading/writing the registers and data FIFOs in the controller.
++ * Some of the data access functions provide encapsulation of several
++ * operations required to perform a task, such as writing multiple
++ * registers to start a transfer. Finally, the CIL performs basic
++ * services that are not specific to either the host or device modes
++ * of operation. These services include management of the OTG Host
++ * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A
++ * Diagnostic API is also provided to allow testing of the controller
++ * hardware.
++ *
++ * The Core Interface Layer has the following requirements:
++ * - Provides basic controller operations.
++ * - Minimal use of OS services.
++ * - The OS services used will be abstracted by using inline functions
++ * or macros.
++ *
++ */
++#include <asm/unaligned.h>
++
++#ifdef DEBUG
++#include <linux/jiffies.h>
++#endif
++
++#include "dwc_otg_plat.h"
++
++#include "dwc_otg_regs.h"
++#include "dwc_otg_cil.h"
++
++/**
++ * This function is called to initialize the DWC_otg CSR data
++ * structures. The register addresses in the device and host
++ * structures are initialized from the base address supplied by the
++ * caller. The calling function must make the OS calls to get the
++ * base address of the DWC_otg controller registers. The core_params
++ * argument holds the parameters that specify how the core should be
++ * configured.
++ *
++ * @param[in] _reg_base_addr Base address of DWC_otg core registers
++ * @param[in] _core_params Pointer to the core configuration parameters
++ *
++ */
++dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *_reg_base_addr,
++ dwc_otg_core_params_t *_core_params)
++{
++ dwc_otg_core_if_t *core_if = 0;
++ dwc_otg_dev_if_t *dev_if = 0;
++ dwc_otg_host_if_t *host_if = 0;
++ uint8_t *reg_base = (uint8_t *)_reg_base_addr;
++ int i = 0;
++
++ DWC_DEBUGPL(DBG_CILV, "%s(%p,%p)\n", __func__, _reg_base_addr, _core_params);
++
++ core_if = kmalloc( sizeof(dwc_otg_core_if_t), GFP_KERNEL);
++ if (core_if == 0) {
++ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_core_if_t failed\n");
++ return 0;
++ }
++ memset(core_if, 0, sizeof(dwc_otg_core_if_t));
++
++ core_if->core_params = _core_params;
++ core_if->core_global_regs = (dwc_otg_core_global_regs_t *)reg_base;
++ /*
++ * Allocate the Device Mode structures.
++ */
++ dev_if = kmalloc( sizeof(dwc_otg_dev_if_t), GFP_KERNEL);
++ if (dev_if == 0) {
++ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n");
++ kfree( core_if );
++ return 0;
++ }
++
++ dev_if->dev_global_regs =
++ (dwc_otg_device_global_regs_t *)(reg_base + DWC_DEV_GLOBAL_REG_OFFSET);
++
++ for (i=0; i<MAX_EPS_CHANNELS; i++) {
++ dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *)
++ (reg_base + DWC_DEV_IN_EP_REG_OFFSET +
++ (i * DWC_EP_REG_OFFSET));
++
++ dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *)
++ (reg_base + DWC_DEV_OUT_EP_REG_OFFSET +
++ (i * DWC_EP_REG_OFFSET));
++ DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n",
++ i, &dev_if->in_ep_regs[i]->diepctl);
++ DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n",
++ i, &dev_if->out_ep_regs[i]->doepctl);
++ }
++ dev_if->speed = 0; // unknown
++ //dev_if->num_eps = MAX_EPS_CHANNELS;
++ //dev_if->num_perio_eps = 0;
++
++ core_if->dev_if = dev_if;
++ /*
++ * Allocate the Host Mode structures.
++ */
++ host_if = kmalloc( sizeof(dwc_otg_host_if_t), GFP_KERNEL);
++ if (host_if == 0) {
++ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_host_if_t failed\n");
++ kfree( dev_if );
++ kfree( core_if );
++ return 0;
++ }
++
++ host_if->host_global_regs = (dwc_otg_host_global_regs_t *)
++ (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET);
++ host_if->hprt0 = (uint32_t*)(reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET);
++ for (i=0; i<MAX_EPS_CHANNELS; i++) {
++ host_if->hc_regs[i] = (dwc_otg_hc_regs_t *)
++ (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET +
++ (i * DWC_OTG_CHAN_REGS_OFFSET));
++ DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n",
++ i, &host_if->hc_regs[i]->hcchar);
++ }
++ host_if->num_host_channels = MAX_EPS_CHANNELS;
++ core_if->host_if = host_if;
++
++ for (i=0; i<MAX_EPS_CHANNELS; i++) {
++ core_if->data_fifo[i] =
++ (uint32_t *)(reg_base + DWC_OTG_DATA_FIFO_OFFSET +
++ (i * DWC_OTG_DATA_FIFO_SIZE));
++ DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08x\n",
++ i, (unsigned)core_if->data_fifo[i]);
++ } // for loop.
++
++ core_if->pcgcctl = (uint32_t*)(reg_base + DWC_OTG_PCGCCTL_OFFSET);
++
++ /*
++ * Store the contents of the hardware configuration registers here for
++ * easy access later.
++ */
++ core_if->hwcfg1.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg1);
++ core_if->hwcfg2.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg2);
++ core_if->hwcfg3.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg3);
++ core_if->hwcfg4.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg4);
++
++ DWC_DEBUGPL(DBG_CILV,"hwcfg1=%08x\n",core_if->hwcfg1.d32);
++ DWC_DEBUGPL(DBG_CILV,"hwcfg2=%08x\n",core_if->hwcfg2.d32);
++ DWC_DEBUGPL(DBG_CILV,"hwcfg3=%08x\n",core_if->hwcfg3.d32);
++ DWC_DEBUGPL(DBG_CILV,"hwcfg4=%08x\n",core_if->hwcfg4.d32);
++
++
++ DWC_DEBUGPL(DBG_CILV,"op_mode=%0x\n",core_if->hwcfg2.b.op_mode);
++ DWC_DEBUGPL(DBG_CILV,"arch=%0x\n",core_if->hwcfg2.b.architecture);
++ DWC_DEBUGPL(DBG_CILV,"num_dev_ep=%d\n",core_if->hwcfg2.b.num_dev_ep);
++ DWC_DEBUGPL(DBG_CILV,"num_host_chan=%d\n",core_if->hwcfg2.b.num_host_chan);
++ DWC_DEBUGPL(DBG_CILV,"nonperio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.nonperio_tx_q_depth);
++ DWC_DEBUGPL(DBG_CILV,"host_perio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.host_perio_tx_q_depth);
++ DWC_DEBUGPL(DBG_CILV,"dev_token_q_depth=0x%0x\n",core_if->hwcfg2.b.dev_token_q_depth);
++
++ DWC_DEBUGPL(DBG_CILV,"Total FIFO SZ=%d\n", core_if->hwcfg3.b.dfifo_depth);
++ DWC_DEBUGPL(DBG_CILV,"xfer_size_cntr_width=%0x\n", core_if->hwcfg3.b.xfer_size_cntr_width);
++
++ /*
++ * Set the SRP sucess bit for FS-I2c
++ */
++ core_if->srp_success = 0;
++ core_if->srp_timer_started = 0;
++
++ return core_if;
++}
++/**
++ * This function frees the structures allocated by dwc_otg_cil_init().
++ *
++ * @param[in] _core_if The core interface pointer returned from
++ * dwc_otg_cil_init().
++ *
++ */
++void dwc_otg_cil_remove( dwc_otg_core_if_t *_core_if )
++{
++ /* Disable all interrupts */
++ dwc_modify_reg32( &_core_if->core_global_regs->gahbcfg, 1, 0);
++ dwc_write_reg32( &_core_if->core_global_regs->gintmsk, 0);
++
++ if ( _core_if->dev_if ) {
++ kfree( _core_if->dev_if );
++ }
++ if ( _core_if->host_if ) {
++ kfree( _core_if->host_if );
++ }
++ kfree( _core_if );
++}
++
++/**
++ * This function enables the controller's Global Interrupt in the AHB Config
++ * register.
++ *
++ * @param[in] _core_if Programming view of DWC_otg controller.
++ */
++extern void dwc_otg_enable_global_interrupts( dwc_otg_core_if_t *_core_if )
++{
++ gahbcfg_data_t ahbcfg = { .d32 = 0};
++ ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
++ dwc_modify_reg32(&_core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32);
++}
++/**
++ * This function disables the controller's Global Interrupt in the AHB Config
++ * register.
++ *
++ * @param[in] _core_if Programming view of DWC_otg controller.
++ */
++extern void dwc_otg_disable_global_interrupts( dwc_otg_core_if_t *_core_if )
++{
++ gahbcfg_data_t ahbcfg = { .d32 = 0};
++ ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
++ dwc_modify_reg32(&_core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
++}
++
++/**
++ * This function initializes the commmon interrupts, used in both
++ * device and host modes.
++ *
++ * @param[in] _core_if Programming view of the DWC_otg controller
++ *
++ */
++static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t *_core_if)
++{
++ dwc_otg_core_global_regs_t *global_regs =
++ _core_if->core_global_regs;
++ gintmsk_data_t intr_mask = { .d32 = 0};
++ /* Clear any pending OTG Interrupts */
++ dwc_write_reg32( &global_regs->gotgint, 0xFFFFFFFF);
++ /* Clear any pending interrupts */
++ dwc_write_reg32( &global_regs->gintsts, 0xFFFFFFFF);
++ /*
++ * Enable the interrupts in the GINTMSK.
++ */
++ intr_mask.b.modemismatch = 1;
++ intr_mask.b.otgintr = 1;
++ if (!_core_if->dma_enable) {
++ intr_mask.b.rxstsqlvl = 1;
++ }
++ intr_mask.b.conidstschng = 1;
++ intr_mask.b.wkupintr = 1;
++ intr_mask.b.disconnect = 1;
++ intr_mask.b.usbsuspend = 1;
++ intr_mask.b.sessreqintr = 1;
++ dwc_write_reg32( &global_regs->gintmsk, intr_mask.d32);
++}
++
++/**
++ * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY
++ * type.
++ */
++static void init_fslspclksel(dwc_otg_core_if_t *_core_if)
++{
++ uint32_t val;
++ hcfg_data_t hcfg;
++
++ if (((_core_if->hwcfg2.b.hs_phy_type == 2) &&
++ (_core_if->hwcfg2.b.fs_phy_type == 1) &&
++ (_core_if->core_params->ulpi_fs_ls)) ||
++ (_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS))
++ {
++ /* Full speed PHY */
++ val = DWC_HCFG_48_MHZ;
++ } else {
++ /* High speed PHY running at full speed or high speed */
++ val = DWC_HCFG_30_60_MHZ;
++ }
++
++ DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val);
++ hcfg.d32 = dwc_read_reg32(&_core_if->host_if->host_global_regs->hcfg);
++ hcfg.b.fslspclksel = val;
++ dwc_write_reg32(&_core_if->host_if->host_global_regs->hcfg, hcfg.d32);
++}
++
++/**
++ * Initializes the DevSpd field of the DCFG register depending on the PHY type
++ * and the enumeration speed of the device.
++ */
++static void init_devspd(dwc_otg_core_if_t *_core_if)
++{
++ uint32_t val;
++ dcfg_data_t dcfg;
++
++ if (((_core_if->hwcfg2.b.hs_phy_type == 2) &&
++ (_core_if->hwcfg2.b.fs_phy_type == 1) &&
++ (_core_if->core_params->ulpi_fs_ls)) ||
++ (_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS))
++ {
++ /* Full speed PHY */
++ val = 0x3;
++ } else if (_core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
++ /* High speed PHY running at full speed */
++ val = 0x1;
++ } else {
++ /* High speed PHY running at high speed */
++ val = 0x0;
++ }
++
++ DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val);
++ dcfg.d32 = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->dcfg);
++ dcfg.b.devspd = val;
++ dwc_write_reg32(&_core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
++}
++
++/**
++ * This function calculates the number of IN EPS
++ * using GHWCFG1 and GHWCFG2 registers values
++ *
++ * @param _pcd the pcd structure.
++ */
++static uint32_t calc_num_in_eps(dwc_otg_core_if_t * _core_if)
++{
++ uint32_t num_in_eps = 0;
++ uint32_t num_eps = _core_if->hwcfg2.b.num_dev_ep;
++ uint32_t hwcfg1 = _core_if->hwcfg1.d32 >> 2;
++ uint32_t num_tx_fifos = _core_if->hwcfg4.b.num_in_eps;
++ int i;
++ for (i = 0; i < num_eps; ++i) {
++ if (!(hwcfg1 & 0x1))
++ num_in_eps++;
++ hwcfg1 >>= 2;
++ }
++ if (_core_if->hwcfg4.b.ded_fifo_en) {
++ num_in_eps = (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps;
++ }
++ return num_in_eps;
++}
++
++
++/**
++ * This function calculates the number of OUT EPS
++ * using GHWCFG1 and GHWCFG2 registers values
++ *
++ * @param _pcd the pcd structure.
++ */
++static uint32_t calc_num_out_eps(dwc_otg_core_if_t * _core_if)
++{
++ uint32_t num_out_eps = 0;
++ uint32_t num_eps = _core_if->hwcfg2.b.num_dev_ep;
++ uint32_t hwcfg1 = _core_if->hwcfg1.d32 >> 2;
++ int i;
++ for (i = 0; i < num_eps; ++i) {
++ if (!(hwcfg1 & 0x2))
++ num_out_eps++;
++ hwcfg1 >>= 2;
++ }
++ return num_out_eps;
++}
++/**
++ * This function initializes the DWC_otg controller registers and
++ * prepares the core for device mode or host mode operation.
++ *
++ * @param _core_if Programming view of the DWC_otg controller
++ *
++ */
++void dwc_otg_core_init(dwc_otg_core_if_t *_core_if)
++{
++ dwc_otg_core_global_regs_t * global_regs = _core_if->core_global_regs;
++ dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++ int i = 0;
++ gahbcfg_data_t ahbcfg = { .d32 = 0};
++ gusbcfg_data_t usbcfg = { .d32 = 0 };
++ gi2cctl_data_t i2cctl = {.d32 = 0};
++
++ DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p)\n",_core_if);
++
++ /* Common Initialization */
++
++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++ DWC_DEBUGPL(DBG_CIL, "USB config register: 0x%08x\n", usbcfg.d32);
++
++ /* Program the ULPI External VBUS bit if needed */
++ //usbcfg.b.ulpi_ext_vbus_drv = 1;
++ //usbcfg.b.ulpi_ext_vbus_drv = 0;
++ usbcfg.b.ulpi_ext_vbus_drv =
++ (_core_if->core_params->phy_ulpi_ext_vbus == DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0;
++
++ /* Set external TS Dline pulsing */
++ usbcfg.b.term_sel_dl_pulse = (_core_if->core_params->ts_dline == 1) ? 1 : 0;
++ dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
++
++ /* Reset the Controller */
++ dwc_otg_core_reset( _core_if );
++
++ /* Initialize parameters from Hardware configuration registers. */
++#if 0
++ dev_if->num_eps = _core_if->hwcfg2.b.num_dev_ep;
++ dev_if->num_perio_eps = _core_if->hwcfg4.b.num_dev_perio_in_ep;
++#else
++ dev_if->num_in_eps = calc_num_in_eps(_core_if);
++ dev_if->num_out_eps = calc_num_out_eps(_core_if);
++#endif
++ DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n",
++ _core_if->hwcfg4.b.num_dev_perio_in_ep);
++ DWC_DEBUGPL(DBG_CIL, "Is power optimization enabled? %s\n",
++ _core_if->hwcfg4.b.power_optimiz ? "Yes" : "No");
++ DWC_DEBUGPL(DBG_CIL, "vbus_valid filter enabled? %s\n",
++ _core_if->hwcfg4.b.vbus_valid_filt_en ? "Yes" : "No");
++ DWC_DEBUGPL(DBG_CIL, "iddig filter enabled? %s\n",
++ _core_if->hwcfg4.b.iddig_filt_en ? "Yes" : "No");
++
++ DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n",_core_if->hwcfg4.b.num_dev_perio_in_ep);
++ for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++) {
++ dev_if->perio_tx_fifo_size[i] =
++ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
++ DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n", i,
++ dev_if->perio_tx_fifo_size[i]);
++ }
++ for (i = 0; i < _core_if->hwcfg4.b.num_in_eps; i++) {
++ dev_if->tx_fifo_size[i] =
++ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
++ DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n", i,
++ dev_if->perio_tx_fifo_size[i]);
++ }
++
++ _core_if->total_fifo_size = _core_if->hwcfg3.b.dfifo_depth;
++ _core_if->rx_fifo_size = dwc_read_reg32(&global_regs->grxfsiz);
++ _core_if->nperio_tx_fifo_size = dwc_read_reg32(&global_regs->gnptxfsiz) >> 16;
++
++ DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", _core_if->total_fifo_size);
++ DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", _core_if->rx_fifo_size);
++ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n", _core_if->nperio_tx_fifo_size);
++
++ /* This programming sequence needs to happen in FS mode before any other
++ * programming occurs */
++ if ((_core_if->core_params->speed == DWC_SPEED_PARAM_FULL) &&
++ (_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
++ /* If FS mode with FS PHY */
++
++ /* core_init() is now called on every switch so only call the
++ * following for the first time through. */
++ if (!_core_if->phy_init_done) {
++ _core_if->phy_init_done = 1;
++ DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n");
++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++ usbcfg.b.physel = 1;
++ dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
++
++ /* Reset after a PHY select */
++ dwc_otg_core_reset( _core_if );
++ }
++
++ /* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also
++ * do this on HNP Dev/Host mode switches (done in dev_init and
++ * host_init). */
++ if (dwc_otg_is_host_mode(_core_if)) {
++ DWC_DEBUGPL(DBG_CIL, "host mode\n");
++ init_fslspclksel(_core_if);
++ } else {
++ DWC_DEBUGPL(DBG_CIL, "device mode\n");
++ init_devspd(_core_if);
++ }
++
++ if (_core_if->core_params->i2c_enable) {
++ DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n");
++ /* Program GUSBCFG.OtgUtmifsSel to I2C */
++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++ usbcfg.b.otgutmifssel = 1;
++ dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
++
++ /* Program GI2CCTL.I2CEn */
++ i2cctl.d32 = dwc_read_reg32(&global_regs->gi2cctl);
++ i2cctl.b.i2cdevaddr = 1;
++ i2cctl.b.i2cen = 0;
++ dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
++ i2cctl.b.i2cen = 1;
++ dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
++ }
++
++ } /* endif speed == DWC_SPEED_PARAM_FULL */
++ else {
++ /* High speed PHY. */
++ if (!_core_if->phy_init_done) {
++ _core_if->phy_init_done = 1;
++ DWC_DEBUGPL(DBG_CIL, "High spped PHY\n");
++ /* HS PHY parameters. These parameters are preserved
++ * during soft reset so only program the first time. Do
++ * a soft reset immediately after setting phyif. */
++ usbcfg.b.ulpi_utmi_sel = _core_if->core_params->phy_type;
++ if (usbcfg.b.ulpi_utmi_sel == 2) { // winder
++ DWC_DEBUGPL(DBG_CIL, "ULPI\n");
++ /* ULPI interface */
++ usbcfg.b.phyif = 0;
++ usbcfg.b.ddrsel = _core_if->core_params->phy_ulpi_ddr;
++ } else {
++ /* UTMI+ interface */
++ if (_core_if->core_params->phy_utmi_width == 16) {
++ usbcfg.b.phyif = 1;
++ DWC_DEBUGPL(DBG_CIL, "UTMI+ 16\n");
++ } else {
++ DWC_DEBUGPL(DBG_CIL, "UTMI+ 8\n");
++ usbcfg.b.phyif = 0;
++ }
++ }
++ dwc_write_reg32( &global_regs->gusbcfg, usbcfg.d32);
++
++ /* Reset after setting the PHY parameters */
++ dwc_otg_core_reset( _core_if );
++ }
++ }
++
++ if ((_core_if->hwcfg2.b.hs_phy_type == 2) &&
++ (_core_if->hwcfg2.b.fs_phy_type == 1) &&
++ (_core_if->core_params->ulpi_fs_ls))
++ {
++ DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n");
++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++ usbcfg.b.ulpi_fsls = 1;
++ usbcfg.b.ulpi_clk_sus_m = 1;
++ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++ } else {
++ DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS=0\n");
++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
++ usbcfg.b.ulpi_fsls = 0;
++ usbcfg.b.ulpi_clk_sus_m = 0;
++ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++ }
++
++ /* Program the GAHBCFG Register.*/
++ switch (_core_if->hwcfg2.b.architecture){
++
++ case DWC_SLAVE_ONLY_ARCH:
++ DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n");
++ ahbcfg.b.nptxfemplvl_txfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
++ ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
++ _core_if->dma_enable = 0;
++ break;
++
++ case DWC_EXT_DMA_ARCH:
++ DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n");
++ ahbcfg.b.hburstlen = _core_if->core_params->dma_burst_size;
++ _core_if->dma_enable = (_core_if->core_params->dma_enable != 0);
++ break;
++
++ case DWC_INT_DMA_ARCH:
++ DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n");
++ //ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR;
++ ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR4;
++ _core_if->dma_enable = (_core_if->core_params->dma_enable != 0);
++ break;
++ }
++ ahbcfg.b.dmaenable = _core_if->dma_enable;
++ dwc_write_reg32(&global_regs->gahbcfg, ahbcfg.d32);
++ _core_if->en_multiple_tx_fifo = _core_if->hwcfg4.b.ded_fifo_en;
++
++ /*
++ * Program the GUSBCFG register.
++ */
++ usbcfg.d32 = dwc_read_reg32( &global_regs->gusbcfg );
++
++ switch (_core_if->hwcfg2.b.op_mode) {
++ case DWC_MODE_HNP_SRP_CAPABLE:
++ usbcfg.b.hnpcap = (_core_if->core_params->otg_cap ==
++ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE);
++ usbcfg.b.srpcap = (_core_if->core_params->otg_cap !=
++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++ break;
++
++ case DWC_MODE_SRP_ONLY_CAPABLE:
++ usbcfg.b.hnpcap = 0;
++ usbcfg.b.srpcap = (_core_if->core_params->otg_cap !=
++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++ break;
++
++ case DWC_MODE_NO_HNP_SRP_CAPABLE:
++ usbcfg.b.hnpcap = 0;
++ usbcfg.b.srpcap = 0;
++ break;
++
++ case DWC_MODE_SRP_CAPABLE_DEVICE:
++ usbcfg.b.hnpcap = 0;
++ usbcfg.b.srpcap = (_core_if->core_params->otg_cap !=
++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++ break;
++
++ case DWC_MODE_NO_SRP_CAPABLE_DEVICE:
++ usbcfg.b.hnpcap = 0;
++ usbcfg.b.srpcap = 0;
++ break;
++
++ case DWC_MODE_SRP_CAPABLE_HOST:
++ usbcfg.b.hnpcap = 0;
++ usbcfg.b.srpcap = (_core_if->core_params->otg_cap !=
++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++ break;
++
++ case DWC_MODE_NO_SRP_CAPABLE_HOST:
++ usbcfg.b.hnpcap = 0;
++ usbcfg.b.srpcap = 0;
++ break;
++ }
++
++ dwc_write_reg32( &global_regs->gusbcfg, usbcfg.d32);
++
++ /* Enable common interrupts */
++ dwc_otg_enable_common_interrupts( _core_if );
++
++ /* Do device or host intialization based on mode during PCD
++ * and HCD initialization */
++ if (dwc_otg_is_host_mode( _core_if )) {
++ DWC_DEBUGPL(DBG_ANY, "Host Mode\n" );
++ _core_if->op_state = A_HOST;
++ } else {
++ DWC_DEBUGPL(DBG_ANY, "Device Mode\n" );
++ _core_if->op_state = B_PERIPHERAL;
++#ifdef DWC_DEVICE_ONLY
++ dwc_otg_core_dev_init( _core_if );
++#endif
++ }
++}
++
++
++/**
++ * This function enables the Device mode interrupts.
++ *
++ * @param _core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *_core_if)
++{
++ gintmsk_data_t intr_mask = { .d32 = 0};
++ dwc_otg_core_global_regs_t * global_regs = _core_if->core_global_regs;
++
++ DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
++
++ /* Disable all interrupts. */
++ dwc_write_reg32( &global_regs->gintmsk, 0);
++
++ /* Clear any pending interrupts */
++ dwc_write_reg32( &global_regs->gintsts, 0xFFFFFFFF);
++
++ /* Enable the common interrupts */
++ dwc_otg_enable_common_interrupts( _core_if );
++
++ /* Enable interrupts */
++ intr_mask.b.usbreset = 1;
++ intr_mask.b.enumdone = 1;
++ //intr_mask.b.epmismatch = 1;
++ intr_mask.b.inepintr = 1;
++ intr_mask.b.outepintr = 1;
++ intr_mask.b.erlysuspend = 1;
++ if (_core_if->en_multiple_tx_fifo == 0) {
++ intr_mask.b.epmismatch = 1;
++ }
++
++ /** @todo NGS: Should this be a module parameter? */
++ intr_mask.b.isooutdrop = 1;
++ intr_mask.b.eopframe = 1;
++ intr_mask.b.incomplisoin = 1;
++ intr_mask.b.incomplisoout = 1;
++
++ dwc_modify_reg32( &global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++
++ DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__,
++ dwc_read_reg32( &global_regs->gintmsk));
++}
++
++/**
++ * This function initializes the DWC_otg controller registers for
++ * device mode.
++ *
++ * @param _core_if Programming view of DWC_otg controller
++ *
++ */
++void dwc_otg_core_dev_init(dwc_otg_core_if_t *_core_if)
++{
++ dwc_otg_core_global_regs_t *global_regs =
++ _core_if->core_global_regs;
++ dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++ dwc_otg_core_params_t *params = _core_if->core_params;
++ dcfg_data_t dcfg = {.d32 = 0};
++ grstctl_t resetctl = { .d32=0 };
++ int i;
++ uint32_t rx_fifo_size;
++ fifosize_data_t nptxfifosize;
++ fifosize_data_t txfifosize;
++ dthrctl_data_t dthrctl;
++
++ fifosize_data_t ptxfifosize;
++
++ /* Restart the Phy Clock */
++ dwc_write_reg32(_core_if->pcgcctl, 0);
++
++ /* Device configuration register */
++ init_devspd(_core_if);
++ dcfg.d32 = dwc_read_reg32( &dev_if->dev_global_regs->dcfg);
++ dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80;
++ dwc_write_reg32( &dev_if->dev_global_regs->dcfg, dcfg.d32 );
++
++ /* Configure data FIFO sizes */
++ if ( _core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo ) {
++
++ DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", _core_if->total_fifo_size);
++ DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", params->dev_rx_fifo_size);
++ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", params->dev_nperio_tx_fifo_size);
++
++ /* Rx FIFO */
++ DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n",
++ dwc_read_reg32(&global_regs->grxfsiz));
++ rx_fifo_size = params->dev_rx_fifo_size;
++ dwc_write_reg32( &global_regs->grxfsiz, rx_fifo_size );
++ DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n",
++ dwc_read_reg32(&global_regs->grxfsiz));
++
++ /** Set Periodic Tx FIFO Mask all bits 0 */
++ _core_if->p_tx_msk = 0;
++
++ /** Set Tx FIFO Mask all bits 0 */
++ _core_if->tx_msk = 0;
++ if (_core_if->en_multiple_tx_fifo == 0) {
++ /* Non-periodic Tx FIFO */
++ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
++ dwc_read_reg32(&global_regs->gnptxfsiz));
++ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
++ nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
++ dwc_write_reg32( &global_regs->gnptxfsiz, nptxfifosize.d32 );
++ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
++ dwc_read_reg32(&global_regs->gnptxfsiz));
++
++
++ /**@todo NGS: Fix Periodic FIFO Sizing! */
++ /*
++ * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15.
++ * Indexes of the FIFO size module parameters in the
++ * dev_perio_tx_fifo_size array and the FIFO size registers in
++ * the dptxfsiz array run from 0 to 14.
++ */
++ /** @todo Finish debug of this */
++ ptxfifosize.b.startaddr =
++ nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++ for (i = 0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep;i++) {
++ ptxfifosize.b.depth = params->dev_perio_tx_fifo_size[i];
++ DWC_DEBUGPL(DBG_CIL,"initial dptxfsiz_dieptxf[%d]=%08x\n",
++ i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
++ dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i],ptxfifosize.d32);
++ DWC_DEBUGPL(DBG_CIL,"new dptxfsiz_dieptxf[%d]=%08x\n",
++ i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
++ ptxfifosize.b.startaddr += ptxfifosize.b.depth;
++ }
++ } else {
++
++ /*
++ * Tx FIFOs These FIFOs are numbered from 1 to 15.
++ * Indexes of the FIFO size module parameters in the
++ * dev_tx_fifo_size array and the FIFO size registers in
++ * the dptxfsiz_dieptxf array run from 0 to 14.
++ */
++
++ /* Non-periodic Tx FIFO */
++ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
++ dwc_read_reg32(&global_regs->gnptxfsiz));
++ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
++ nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
++ dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
++ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
++ dwc_read_reg32(&global_regs->gnptxfsiz));
++ txfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++ for (i = 1;i < _core_if->hwcfg4.b.num_dev_perio_in_ep;i++) {
++ txfifosize.b.depth = params->dev_tx_fifo_size[i];
++ DWC_DEBUGPL(DBG_CIL,"initial dptxfsiz_dieptxf[%d]=%08x\n",
++ i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
++ dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i - 1],txfifosize.d32);
++ DWC_DEBUGPL(DBG_CIL,"new dptxfsiz_dieptxf[%d]=%08x\n",
++ i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i-1]));
++ txfifosize.b.startaddr += txfifosize.b.depth;
++ }
++ }
++ }
++ /* Flush the FIFOs */
++ dwc_otg_flush_tx_fifo(_core_if, 0x10); /* all Tx FIFOs */
++ dwc_otg_flush_rx_fifo(_core_if);
++
++ /* Flush the Learning Queue. */
++ resetctl.b.intknqflsh = 1;
++ dwc_write_reg32( &_core_if->core_global_regs->grstctl, resetctl.d32);
++
++ /* Clear all pending Device Interrupts */
++ dwc_write_reg32( &dev_if->dev_global_regs->diepmsk, 0 );
++ dwc_write_reg32( &dev_if->dev_global_regs->doepmsk, 0 );
++ dwc_write_reg32( &dev_if->dev_global_regs->daint, 0xFFFFFFFF );
++ dwc_write_reg32( &dev_if->dev_global_regs->daintmsk, 0 );
++
++ for (i = 0; i <= dev_if->num_in_eps; i++) {
++ depctl_data_t depctl;
++ depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
++ if (depctl.b.epena) {
++ depctl.d32 = 0;
++ depctl.b.epdis = 1;
++ depctl.b.snak = 1;
++ } else {
++ depctl.d32 = 0;
++ }
++ dwc_write_reg32( &dev_if->in_ep_regs[i]->diepctl, depctl.d32);
++
++ dwc_write_reg32(&dev_if->in_ep_regs[i]->dieptsiz, 0);
++ dwc_write_reg32(&dev_if->in_ep_regs[i]->diepdma, 0);
++ dwc_write_reg32(&dev_if->in_ep_regs[i]->diepint, 0xFF);
++ }
++ for (i = 0; i <= dev_if->num_out_eps; i++) {
++ depctl_data_t depctl;
++ depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl);
++ if (depctl.b.epena) {
++ depctl.d32 = 0;
++ depctl.b.epdis = 1;
++ depctl.b.snak = 1;
++ } else {
++ depctl.d32 = 0;
++ }
++ dwc_write_reg32( &dev_if->out_ep_regs[i]->doepctl, depctl.d32);
++
++ //dwc_write_reg32( &dev_if->in_ep_regs[i]->dieptsiz, 0);
++ dwc_write_reg32( &dev_if->out_ep_regs[i]->doeptsiz, 0);
++ //dwc_write_reg32( &dev_if->in_ep_regs[i]->diepdma, 0);
++ dwc_write_reg32( &dev_if->out_ep_regs[i]->doepdma, 0);
++ //dwc_write_reg32( &dev_if->in_ep_regs[i]->diepint, 0xFF);
++ dwc_write_reg32( &dev_if->out_ep_regs[i]->doepint, 0xFF);
++ }
++
++ if (_core_if->en_multiple_tx_fifo && _core_if->dma_enable) {
++ dev_if->non_iso_tx_thr_en = _core_if->core_params->thr_ctl & 0x1;
++ dev_if->iso_tx_thr_en = (_core_if->core_params->thr_ctl >> 1) & 0x1;
++ dev_if->rx_thr_en = (_core_if->core_params->thr_ctl >> 2) & 0x1;
++ dev_if->rx_thr_length = _core_if->core_params->rx_thr_length;
++ dev_if->tx_thr_length = _core_if->core_params->tx_thr_length;
++ dthrctl.d32 = 0;
++ dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en;
++ dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en;
++ dthrctl.b.tx_thr_len = dev_if->tx_thr_length;
++ dthrctl.b.rx_thr_en = dev_if->rx_thr_en;
++ dthrctl.b.rx_thr_len = dev_if->rx_thr_length;
++ dwc_write_reg32(&dev_if->dev_global_regs->dtknqr3_dthrctl,dthrctl.d32);
++ DWC_DEBUGPL(DBG_CIL, "Non ISO Tx Thr - %d\nISO Tx Thr - %d\n"
++ "Rx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n",
++ dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en,
++ dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len,
++ dthrctl.b.rx_thr_len);
++ }
++ dwc_otg_enable_device_interrupts( _core_if );
++ {
++ diepmsk_data_t msk = {.d32 = 0};
++ msk.b.txfifoundrn = 1;
++ dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, msk.d32,msk.d32);
++}
++}
++
++/**
++ * This function enables the Host mode interrupts.
++ *
++ * @param _core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *_core_if)
++{
++ dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
++ gintmsk_data_t intr_mask = {.d32 = 0};
++
++ DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
++
++ /* Disable all interrupts. */
++ dwc_write_reg32(&global_regs->gintmsk, 0);
++
++ /* Clear any pending interrupts. */
++ dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
++
++ /* Enable the common interrupts */
++ dwc_otg_enable_common_interrupts(_core_if);
++
++ /*
++ * Enable host mode interrupts without disturbing common
++ * interrupts.
++ */
++ intr_mask.b.sofintr = 1;
++ intr_mask.b.portintr = 1;
++ intr_mask.b.hcintr = 1;
++
++ //dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++ //dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
++ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++}
++
++/**
++ * This function disables the Host Mode interrupts.
++ *
++ * @param _core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *_core_if)
++{
++ dwc_otg_core_global_regs_t *global_regs =
++ _core_if->core_global_regs;
++ gintmsk_data_t intr_mask = {.d32 = 0};
++
++ DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__);
++
++ /*
++ * Disable host mode interrupts without disturbing common
++ * interrupts.
++ */
++ intr_mask.b.sofintr = 1;
++ intr_mask.b.portintr = 1;
++ intr_mask.b.hcintr = 1;
++ intr_mask.b.ptxfempty = 1;
++ intr_mask.b.nptxfempty = 1;
++
++ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
++}
++
++#if 0
++/* currently not used, keep it here as if needed later */
++static int phy_read(dwc_otg_core_if_t * _core_if, int addr)
++{
++ u32 val;
++ int timeout = 10;
++
++ dwc_write_reg32(&_core_if->core_global_regs->gpvndctl,
++ 0x02000000 | (addr << 16));
++ val = dwc_read_reg32(&_core_if->core_global_regs->gpvndctl);
++ while (((val & 0x08000000) == 0) && (timeout--)) {
++ udelay(1000);
++ val = dwc_read_reg32(&_core_if->core_global_regs->gpvndctl);
++ }
++ val = dwc_read_reg32(&_core_if->core_global_regs->gpvndctl);
++ printk("%s: addr=%02x regval=%02x\n", __func__, addr, val & 0x000000ff);
++
++ return 0;
++}
++#endif
++
++/**
++ * This function initializes the DWC_otg controller registers for
++ * host mode.
++ *
++ * This function flushes the Tx and Rx FIFOs and it flushes any entries in the
++ * request queues. Host channels are reset to ensure that they are ready for
++ * performing transfers.
++ *
++ * @param _core_if Programming view of DWC_otg controller
++ *
++ */
++void dwc_otg_core_host_init(dwc_otg_core_if_t *_core_if)
++{
++ dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
++ dwc_otg_host_if_t *host_if = _core_if->host_if;
++ dwc_otg_core_params_t *params = _core_if->core_params;
++ hprt0_data_t hprt0 = {.d32 = 0};
++ fifosize_data_t nptxfifosize;
++ fifosize_data_t ptxfifosize;
++ int i;
++ hcchar_data_t hcchar;
++ hcfg_data_t hcfg;
++ dwc_otg_hc_regs_t *hc_regs;
++ int num_channels;
++ gotgctl_data_t gotgctl = {.d32 = 0};
++
++ DWC_DEBUGPL(DBG_CILV,"%s(%p)\n", __func__, _core_if);
++
++ /* Restart the Phy Clock */
++ dwc_write_reg32(_core_if->pcgcctl, 0);
++
++ /* Initialize Host Configuration Register */
++ init_fslspclksel(_core_if);
++ if (_core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
++ hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
++ hcfg.b.fslssupp = 1;
++ dwc_write_reg32(&host_if->host_global_regs->hcfg, hcfg.d32);
++ }
++
++ /* Configure data FIFO sizes */
++ if (_core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
++ DWC_DEBUGPL(DBG_CIL,"Total FIFO Size=%d\n", _core_if->total_fifo_size);
++ DWC_DEBUGPL(DBG_CIL,"Rx FIFO Size=%d\n", params->host_rx_fifo_size);
++ DWC_DEBUGPL(DBG_CIL,"NP Tx FIFO Size=%d\n", params->host_nperio_tx_fifo_size);
++ DWC_DEBUGPL(DBG_CIL,"P Tx FIFO Size=%d\n", params->host_perio_tx_fifo_size);
++
++ /* Rx FIFO */
++ DWC_DEBUGPL(DBG_CIL,"initial grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
++ dwc_write_reg32(&global_regs->grxfsiz, params->host_rx_fifo_size);
++ DWC_DEBUGPL(DBG_CIL,"new grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
++
++ /* Non-periodic Tx FIFO */
++ DWC_DEBUGPL(DBG_CIL,"initial gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
++ nptxfifosize.b.depth = params->host_nperio_tx_fifo_size;
++ nptxfifosize.b.startaddr = params->host_rx_fifo_size;
++ dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
++ DWC_DEBUGPL(DBG_CIL,"new gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
++
++ /* Periodic Tx FIFO */
++ DWC_DEBUGPL(DBG_CIL,"initial hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
++ ptxfifosize.b.depth = params->host_perio_tx_fifo_size;
++ ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++ dwc_write_reg32(&global_regs->hptxfsiz, ptxfifosize.d32);
++ DWC_DEBUGPL(DBG_CIL,"new hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
++ }
++
++ /* Clear Host Set HNP Enable in the OTG Control Register */
++ gotgctl.b.hstsethnpen = 1;
++ dwc_modify_reg32( &global_regs->gotgctl, gotgctl.d32, 0);
++
++ /* Make sure the FIFOs are flushed. */
++ dwc_otg_flush_tx_fifo(_core_if, 0x10 /* all Tx FIFOs */);
++ dwc_otg_flush_rx_fifo(_core_if);
++
++ /* Flush out any leftover queued requests. */
++ num_channels = _core_if->core_params->host_channels;
++ for (i = 0; i < num_channels; i++) {
++ hc_regs = _core_if->host_if->hc_regs[i];
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ hcchar.b.chen = 0;
++ hcchar.b.chdis = 1;
++ hcchar.b.epdir = 0;
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++ }
++
++ /* Halt all channels to put them into a known state. */
++ for (i = 0; i < num_channels; i++) {
++ int count = 0;
++ hc_regs = _core_if->host_if->hc_regs[i];
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ hcchar.b.chen = 1;
++ hcchar.b.chdis = 1;
++ hcchar.b.epdir = 0;
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++ DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d\n", __func__, i);
++ do {
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ if (++count > 200) {
++ DWC_ERROR("%s: Unable to clear halt on channel %d\n",
++ __func__, i);
++ break;
++ }
++ udelay(100);
++ } while (hcchar.b.chen);
++ }
++
++ /* Turn on the vbus power. */
++ DWC_PRINT("Init: Port Power? op_state=%d\n", _core_if->op_state);
++ if (_core_if->op_state == A_HOST){
++ hprt0.d32 = dwc_otg_read_hprt0(_core_if);
++ DWC_PRINT("Init: Power Port (%d)\n", hprt0.b.prtpwr);
++ if (hprt0.b.prtpwr == 0 ) {
++ hprt0.b.prtpwr = 1;
++ dwc_write_reg32(host_if->hprt0, hprt0.d32);
++ }
++ }
++
++ dwc_otg_enable_host_interrupts( _core_if );
++}
++
++/**
++ * Prepares a host channel for transferring packets to/from a specific
++ * endpoint. The HCCHARn register is set up with the characteristics specified
++ * in _hc. Host channel interrupts that may need to be serviced while this
++ * transfer is in progress are enabled.
++ *
++ * @param _core_if Programming view of DWC_otg controller
++ * @param _hc Information needed to initialize the host channel
++ */
++void dwc_otg_hc_init(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
++{
++ uint32_t intr_enable;
++ hcintmsk_data_t hc_intr_mask;
++ gintmsk_data_t gintmsk = {.d32 = 0};
++ hcchar_data_t hcchar;
++ hcsplt_data_t hcsplt;
++
++ uint8_t hc_num = _hc->hc_num;
++ dwc_otg_host_if_t *host_if = _core_if->host_if;
++ dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num];
++
++ /* Clear old interrupt conditions for this host channel. */
++ hc_intr_mask.d32 = 0xFFFFFFFF;
++ hc_intr_mask.b.reserved = 0;
++ dwc_write_reg32(&hc_regs->hcint, hc_intr_mask.d32);
++
++ /* Enable channel interrupts required for this transfer. */
++ hc_intr_mask.d32 = 0;
++ hc_intr_mask.b.chhltd = 1;
++ if (_core_if->dma_enable) {
++ hc_intr_mask.b.ahberr = 1;
++ if (_hc->error_state && !_hc->do_split &&
++ _hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
++ hc_intr_mask.b.ack = 1;
++ if (_hc->ep_is_in) {
++ hc_intr_mask.b.datatglerr = 1;
++ if (_hc->ep_type != DWC_OTG_EP_TYPE_INTR) {
++ hc_intr_mask.b.nak = 1;
++ }
++ }
++ }
++ } else {
++ switch (_hc->ep_type) {
++ case DWC_OTG_EP_TYPE_CONTROL:
++ case DWC_OTG_EP_TYPE_BULK:
++ hc_intr_mask.b.xfercompl = 1;
++ hc_intr_mask.b.stall = 1;
++ hc_intr_mask.b.xacterr = 1;
++ hc_intr_mask.b.datatglerr = 1;
++ if (_hc->ep_is_in) {
++ hc_intr_mask.b.bblerr = 1;
++ } else {
++ hc_intr_mask.b.nak = 1;
++ hc_intr_mask.b.nyet = 1;
++ if (_hc->do_ping) {
++ hc_intr_mask.b.ack = 1;
++ }
++ }
++
++ if (_hc->do_split) {
++ hc_intr_mask.b.nak = 1;
++ if (_hc->complete_split) {
++ hc_intr_mask.b.nyet = 1;
++ }
++ else {
++ hc_intr_mask.b.ack = 1;
++ }
++ }
++
++ if (_hc->error_state) {
++ hc_intr_mask.b.ack = 1;
++ }
++ break;
++ case DWC_OTG_EP_TYPE_INTR:
++ hc_intr_mask.b.xfercompl = 1;
++ hc_intr_mask.b.nak = 1;
++ hc_intr_mask.b.stall = 1;
++ hc_intr_mask.b.xacterr = 1;
++ hc_intr_mask.b.datatglerr = 1;
++ hc_intr_mask.b.frmovrun = 1;
++
++ if (_hc->ep_is_in) {
++ hc_intr_mask.b.bblerr = 1;
++ }
++ if (_hc->error_state) {
++ hc_intr_mask.b.ack = 1;
++ }
++ if (_hc->do_split) {
++ if (_hc->complete_split) {
++ hc_intr_mask.b.nyet = 1;
++ }
++ else {
++ hc_intr_mask.b.ack = 1;
++ }
++ }
++ break;
++ case DWC_OTG_EP_TYPE_ISOC:
++ hc_intr_mask.b.xfercompl = 1;
++ hc_intr_mask.b.frmovrun = 1;
++ hc_intr_mask.b.ack = 1;
++
++ if (_hc->ep_is_in) {
++ hc_intr_mask.b.xacterr = 1;
++ hc_intr_mask.b.bblerr = 1;
++ }
++ break;
++ }
++ }
++ dwc_write_reg32(&hc_regs->hcintmsk, hc_intr_mask.d32);
++
++ /* Enable the top level host channel interrupt. */
++ intr_enable = (1 << hc_num);
++ dwc_modify_reg32(&host_if->host_global_regs->haintmsk, 0, intr_enable);
++
++ /* Make sure host channel interrupts are enabled. */
++ gintmsk.b.hcintr = 1;
++ dwc_modify_reg32(&_core_if->core_global_regs->gintmsk, 0, gintmsk.d32);
++
++ /*
++ * Program the HCCHARn register with the endpoint characteristics for
++ * the current transfer.
++ */
++ hcchar.d32 = 0;
++ hcchar.b.devaddr = _hc->dev_addr;
++ hcchar.b.epnum = _hc->ep_num;
++ hcchar.b.epdir = _hc->ep_is_in;
++ hcchar.b.lspddev = (_hc->speed == DWC_OTG_EP_SPEED_LOW);
++ hcchar.b.eptype = _hc->ep_type;
++ hcchar.b.mps = _hc->max_packet;
++
++ dwc_write_reg32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32);
++
++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
++ DWC_DEBUGPL(DBG_HCDV, " Dev Addr: %d\n", hcchar.b.devaddr);
++ DWC_DEBUGPL(DBG_HCDV, " Ep Num: %d\n", hcchar.b.epnum);
++ DWC_DEBUGPL(DBG_HCDV, " Is In: %d\n", hcchar.b.epdir);
++ DWC_DEBUGPL(DBG_HCDV, " Is Low Speed: %d\n", hcchar.b.lspddev);
++ DWC_DEBUGPL(DBG_HCDV, " Ep Type: %d\n", hcchar.b.eptype);
++ DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps);
++ DWC_DEBUGPL(DBG_HCDV, " Multi Cnt: %d\n", hcchar.b.multicnt);
++
++ /*
++ * Program the HCSPLIT register for SPLITs
++ */
++ hcsplt.d32 = 0;
++ if (_hc->do_split) {
++ DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", _hc->hc_num,
++ _hc->complete_split ? "CSPLIT" : "SSPLIT");
++ hcsplt.b.compsplt = _hc->complete_split;
++ hcsplt.b.xactpos = _hc->xact_pos;
++ hcsplt.b.hubaddr = _hc->hub_addr;
++ hcsplt.b.prtaddr = _hc->port_addr;
++ DWC_DEBUGPL(DBG_HCDV, " comp split %d\n", _hc->complete_split);
++ DWC_DEBUGPL(DBG_HCDV, " xact pos %d\n", _hc->xact_pos);
++ DWC_DEBUGPL(DBG_HCDV, " hub addr %d\n", _hc->hub_addr);
++ DWC_DEBUGPL(DBG_HCDV, " port addr %d\n", _hc->port_addr);
++ DWC_DEBUGPL(DBG_HCDV, " is_in %d\n", _hc->ep_is_in);
++ DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps);
++ DWC_DEBUGPL(DBG_HCDV, " xferlen: %d\n", _hc->xfer_len);
++ }
++ dwc_write_reg32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32);
++
++}
++
++/**
++ * Attempts to halt a host channel. This function should only be called in
++ * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under
++ * normal circumstances in DMA mode, the controller halts the channel when the
++ * transfer is complete or a condition occurs that requires application
++ * intervention.
++ *
++ * In slave mode, checks for a free request queue entry, then sets the Channel
++ * Enable and Channel Disable bits of the Host Channel Characteristics
++ * register of the specified channel to intiate the halt. If there is no free
++ * request queue entry, sets only the Channel Disable bit of the HCCHARn
++ * register to flush requests for this channel. In the latter case, sets a
++ * flag to indicate that the host channel needs to be halted when a request
++ * queue slot is open.
++ *
++ * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
++ * HCCHARn register. The controller ensures there is space in the request
++ * queue before submitting the halt request.
++ *
++ * Some time may elapse before the core flushes any posted requests for this
++ * host channel and halts. The Channel Halted interrupt handler completes the
++ * deactivation of the host channel.
++ *
++ * @param _core_if Controller register interface.
++ * @param _hc Host channel to halt.
++ * @param _halt_status Reason for halting the channel.
++ */
++void dwc_otg_hc_halt(dwc_otg_core_if_t *_core_if,
++ dwc_hc_t *_hc,
++ dwc_otg_halt_status_e _halt_status)
++{
++ gnptxsts_data_t nptxsts;
++ hptxsts_data_t hptxsts;
++ hcchar_data_t hcchar;
++ dwc_otg_hc_regs_t *hc_regs;
++ dwc_otg_core_global_regs_t *global_regs;
++ dwc_otg_host_global_regs_t *host_global_regs;
++
++ hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
++ global_regs = _core_if->core_global_regs;
++ host_global_regs = _core_if->host_if->host_global_regs;
++
++ WARN_ON(_halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS);
++
++ if (_halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
++ _halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
++ /*
++ * Disable all channel interrupts except Ch Halted. The QTD
++ * and QH state associated with this transfer has been cleared
++ * (in the case of URB_DEQUEUE), so the channel needs to be
++ * shut down carefully to prevent crashes.
++ */
++ hcintmsk_data_t hcintmsk;
++ hcintmsk.d32 = 0;
++ hcintmsk.b.chhltd = 1;
++ dwc_write_reg32(&hc_regs->hcintmsk, hcintmsk.d32);
++
++ /*
++ * Make sure no other interrupts besides halt are currently
++ * pending. Handling another interrupt could cause a crash due
++ * to the QTD and QH state.
++ */
++ dwc_write_reg32(&hc_regs->hcint, ~hcintmsk.d32);
++
++ /*
++ * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
++ * even if the channel was already halted for some other
++ * reason.
++ */
++ _hc->halt_status = _halt_status;
++
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ if (hcchar.b.chen == 0) {
++ /*
++ * The channel is either already halted or it hasn't
++ * started yet. In DMA mode, the transfer may halt if
++ * it finishes normally or a condition occurs that
++ * requires driver intervention. Don't want to halt
++ * the channel again. In either Slave or DMA mode,
++ * it's possible that the transfer has been assigned
++ * to a channel, but not started yet when an URB is
++ * dequeued. Don't want to halt a channel that hasn't
++ * started yet.
++ */
++ return;
++ }
++ }
++
++ if (_hc->halt_pending) {
++ /*
++ * A halt has already been issued for this channel. This might
++ * happen when a transfer is aborted by a higher level in
++ * the stack.
++ */
++#ifdef DEBUG
++ DWC_PRINT("*** %s: Channel %d, _hc->halt_pending already set ***\n",
++ __func__, _hc->hc_num);
++
++/* dwc_otg_dump_global_registers(_core_if); */
++/* dwc_otg_dump_host_registers(_core_if); */
++#endif
++ return;
++ }
++
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ hcchar.b.chen = 1;
++ hcchar.b.chdis = 1;
++
++ if (!_core_if->dma_enable) {
++ /* Check for space in the request queue to issue the halt. */
++ if (_hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
++ _hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
++ nptxsts.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++ if (nptxsts.b.nptxqspcavail == 0) {
++ hcchar.b.chen = 0;
++ }
++ } else {
++ hptxsts.d32 = dwc_read_reg32(&host_global_regs->hptxsts);
++ if ((hptxsts.b.ptxqspcavail == 0) || (_core_if->queuing_high_bandwidth)) {
++ hcchar.b.chen = 0;
++ }
++ }
++ }
++
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++ _hc->halt_status = _halt_status;
++
++ if (hcchar.b.chen) {
++ _hc->halt_pending = 1;
++ _hc->halt_on_queue = 0;
++ } else {
++ _hc->halt_on_queue = 1;
++ }
++
++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
++ DWC_DEBUGPL(DBG_HCDV, " hcchar: 0x%08x\n", hcchar.d32);
++ DWC_DEBUGPL(DBG_HCDV, " halt_pending: %d\n", _hc->halt_pending);
++ DWC_DEBUGPL(DBG_HCDV, " halt_on_queue: %d\n", _hc->halt_on_queue);
++ DWC_DEBUGPL(DBG_HCDV, " halt_status: %d\n", _hc->halt_status);
++
++ return;
++}
++
++/**
++ * Clears the transfer state for a host channel. This function is normally
++ * called after a transfer is done and the host channel is being released.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _hc Identifies the host channel to clean up.
++ */
++void dwc_otg_hc_cleanup(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
++{
++ dwc_otg_hc_regs_t *hc_regs;
++
++ _hc->xfer_started = 0;
++
++ /*
++ * Clear channel interrupt enables and any unhandled channel interrupt
++ * conditions.
++ */
++ hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
++ dwc_write_reg32(&hc_regs->hcintmsk, 0);
++ dwc_write_reg32(&hc_regs->hcint, 0xFFFFFFFF);
++
++#ifdef DEBUG
++ del_timer(&_core_if->hc_xfer_timer[_hc->hc_num]);
++ {
++ hcchar_data_t hcchar;
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ if (hcchar.b.chdis) {
++ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
++ __func__, _hc->hc_num, hcchar.d32);
++ }
++ }
++#endif
++}
++
++/**
++ * Sets the channel property that indicates in which frame a periodic transfer
++ * should occur. This is always set to the _next_ frame. This function has no
++ * effect on non-periodic transfers.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _hc Identifies the host channel to set up and its properties.
++ * @param _hcchar Current value of the HCCHAR register for the specified host
++ * channel.
++ */
++static inline void hc_set_even_odd_frame(dwc_otg_core_if_t *_core_if,
++ dwc_hc_t *_hc,
++ hcchar_data_t *_hcchar)
++{
++ if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++ _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++ hfnum_data_t hfnum;
++ hfnum.d32 = dwc_read_reg32(&_core_if->host_if->host_global_regs->hfnum);
++ /* 1 if _next_ frame is odd, 0 if it's even */
++ _hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
++#ifdef DEBUG
++ if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR && _hc->do_split && !_hc->complete_split) {
++ switch (hfnum.b.frnum & 0x7) {
++ case 7:
++ _core_if->hfnum_7_samples++;
++ _core_if->hfnum_7_frrem_accum += hfnum.b.frrem;
++ break;
++ case 0:
++ _core_if->hfnum_0_samples++;
++ _core_if->hfnum_0_frrem_accum += hfnum.b.frrem;
++ break;
++ default:
++ _core_if->hfnum_other_samples++;
++ _core_if->hfnum_other_frrem_accum += hfnum.b.frrem;
++ break;
++ }
++ }
++#endif
++ }
++}
++
++#ifdef DEBUG
++static void hc_xfer_timeout(unsigned long _ptr)
++{
++ hc_xfer_info_t *xfer_info = (hc_xfer_info_t *)_ptr;
++ int hc_num = xfer_info->hc->hc_num;
++ DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num);
++ DWC_WARN(" start_hcchar_val 0x%08x\n", xfer_info->core_if->start_hcchar_val[hc_num]);
++}
++#endif
++
++/*
++ * This function does the setup for a data transfer for a host channel and
++ * starts the transfer. May be called in either Slave mode or DMA mode. In
++ * Slave mode, the caller must ensure that there is sufficient space in the
++ * request queue and Tx Data FIFO.
++ *
++ * For an OUT transfer in Slave mode, it loads a data packet into the
++ * appropriate FIFO. If necessary, additional data packets will be loaded in
++ * the Host ISR.
++ *
++ * For an IN transfer in Slave mode, a data packet is requested. The data
++ * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
++ * additional data packets are requested in the Host ISR.
++ *
++ * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
++ * register along with a packet count of 1 and the channel is enabled. This
++ * causes a single PING transaction to occur. Other fields in HCTSIZ are
++ * simply set to 0 since no data transfer occurs in this case.
++ *
++ * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
++ * all the information required to perform the subsequent data transfer. In
++ * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
++ * controller performs the entire PING protocol, then starts the data
++ * transfer.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _hc Information needed to initialize the host channel. The xfer_len
++ * value may be reduced to accommodate the max widths of the XferSize and
++ * PktCnt fields in the HCTSIZn register. The multi_count value may be changed
++ * to reflect the final xfer_len value.
++ */
++void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
++{
++ hcchar_data_t hcchar;
++ hctsiz_data_t hctsiz;
++ uint16_t num_packets;
++ uint32_t max_hc_xfer_size = _core_if->core_params->max_transfer_size;
++ uint16_t max_hc_pkt_count = _core_if->core_params->max_packet_count;
++ dwc_otg_hc_regs_t *hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
++
++ hctsiz.d32 = 0;
++
++ if (_hc->do_ping) {
++ if (!_core_if->dma_enable) {
++ dwc_otg_hc_do_ping(_core_if, _hc);
++ _hc->xfer_started = 1;
++ return;
++ } else {
++ hctsiz.b.dopng = 1;
++ }
++ }
++
++ if (_hc->do_split) {
++ num_packets = 1;
++
++ if (_hc->complete_split && !_hc->ep_is_in) {
++ /* For CSPLIT OUT Transfer, set the size to 0 so the
++ * core doesn't expect any data written to the FIFO */
++ _hc->xfer_len = 0;
++ } else if (_hc->ep_is_in || (_hc->xfer_len > _hc->max_packet)) {
++ _hc->xfer_len = _hc->max_packet;
++ } else if (!_hc->ep_is_in && (_hc->xfer_len > 188)) {
++ _hc->xfer_len = 188;
++ }
++
++ hctsiz.b.xfersize = _hc->xfer_len;
++ } else {
++ /*
++ * Ensure that the transfer length and packet count will fit
++ * in the widths allocated for them in the HCTSIZn register.
++ */
++ if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++ _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++ /*
++ * Make sure the transfer size is no larger than one
++ * (micro)frame's worth of data. (A check was done
++ * when the periodic transfer was accepted to ensure
++ * that a (micro)frame's worth of data can be
++ * programmed into a channel.)
++ */
++ uint32_t max_periodic_len = _hc->multi_count * _hc->max_packet;
++ if (_hc->xfer_len > max_periodic_len) {
++ _hc->xfer_len = max_periodic_len;
++ } else {
++ }
++ } else if (_hc->xfer_len > max_hc_xfer_size) {
++ /* Make sure that xfer_len is a multiple of max packet size. */
++ _hc->xfer_len = max_hc_xfer_size - _hc->max_packet + 1;
++ }
++
++ if (_hc->xfer_len > 0) {
++ num_packets = (_hc->xfer_len + _hc->max_packet - 1) / _hc->max_packet;
++ if (num_packets > max_hc_pkt_count) {
++ num_packets = max_hc_pkt_count;
++ _hc->xfer_len = num_packets * _hc->max_packet;
++ }
++ } else {
++ /* Need 1 packet for transfer length of 0. */
++ num_packets = 1;
++ }
++
++ if (_hc->ep_is_in) {
++ /* Always program an integral # of max packets for IN transfers. */
++ _hc->xfer_len = num_packets * _hc->max_packet;
++ }
++
++ if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++ _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++ /*
++ * Make sure that the multi_count field matches the
++ * actual transfer length.
++ */
++ _hc->multi_count = num_packets;
++
++ }
++
++ if (_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++ /* Set up the initial PID for the transfer. */
++ if (_hc->speed == DWC_OTG_EP_SPEED_HIGH) {
++ if (_hc->ep_is_in) {
++ if (_hc->multi_count == 1) {
++ _hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++ } else if (_hc->multi_count == 2) {
++ _hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
++ } else {
++ _hc->data_pid_start = DWC_OTG_HC_PID_DATA2;
++ }
++ } else {
++ if (_hc->multi_count == 1) {
++ _hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++ } else {
++ _hc->data_pid_start = DWC_OTG_HC_PID_MDATA;
++ }
++ }
++ } else {
++ _hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++ }
++ }
++
++ hctsiz.b.xfersize = _hc->xfer_len;
++ }
++
++ _hc->start_pkt_count = num_packets;
++ hctsiz.b.pktcnt = num_packets;
++ hctsiz.b.pid = _hc->data_pid_start;
++ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
++ DWC_DEBUGPL(DBG_HCDV, " Xfer Size: %d\n", hctsiz.b.xfersize);
++ DWC_DEBUGPL(DBG_HCDV, " Num Pkts: %d\n", hctsiz.b.pktcnt);
++ DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid);
++
++ if (_core_if->dma_enable) {
++#ifdef DEBUG
++if(((uint32_t)_hc->xfer_buff)%4)
++printk("dwc_otg_hc_start_transfer _hc->xfer_buff not 4 byte alignment\n");
++#endif
++ dwc_write_reg32(&hc_regs->hcdma, (uint32_t)_hc->xfer_buff);
++ }
++
++ /* Start the split */
++ if (_hc->do_split) {
++ hcsplt_data_t hcsplt;
++ hcsplt.d32 = dwc_read_reg32 (&hc_regs->hcsplt);
++ hcsplt.b.spltena = 1;
++ dwc_write_reg32(&hc_regs->hcsplt, hcsplt.d32);
++ }
++
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ hcchar.b.multicnt = _hc->multi_count;
++ hc_set_even_odd_frame(_core_if, _hc, &hcchar);
++#ifdef DEBUG
++ _core_if->start_hcchar_val[_hc->hc_num] = hcchar.d32;
++ if (hcchar.b.chdis) {
++ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
++ __func__, _hc->hc_num, hcchar.d32);
++ }
++#endif
++
++ /* Set host channel enable after all other setup is complete. */
++ hcchar.b.chen = 1;
++ hcchar.b.chdis = 0;
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++ _hc->xfer_started = 1;
++ _hc->requests++;
++
++ if (!_core_if->dma_enable && !_hc->ep_is_in && _hc->xfer_len > 0) {
++ /* Load OUT packet into the appropriate Tx FIFO. */
++ dwc_otg_hc_write_packet(_core_if, _hc);
++ }
++
++#ifdef DEBUG
++ /* Start a timer for this transfer. */
++ _core_if->hc_xfer_timer[_hc->hc_num].function = hc_xfer_timeout;
++ _core_if->hc_xfer_info[_hc->hc_num].core_if = _core_if;
++ _core_if->hc_xfer_info[_hc->hc_num].hc = _hc;
++ _core_if->hc_xfer_timer[_hc->hc_num].data = (unsigned long)(&_core_if->hc_xfer_info[_hc->hc_num]);
++ _core_if->hc_xfer_timer[_hc->hc_num].expires = jiffies + (HZ*10);
++ add_timer(&_core_if->hc_xfer_timer[_hc->hc_num]);
++#endif
++}
++
++/**
++ * This function continues a data transfer that was started by previous call
++ * to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is
++ * sufficient space in the request queue and Tx Data FIFO. This function
++ * should only be called in Slave mode. In DMA mode, the controller acts
++ * autonomously to complete transfers programmed to a host channel.
++ *
++ * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
++ * if there is any data remaining to be queued. For an IN transfer, another
++ * data packet is always requested. For the SETUP phase of a control transfer,
++ * this function does nothing.
++ *
++ * @return 1 if a new request is queued, 0 if no more requests are required
++ * for this transfer.
++ */
++int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
++{
++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
++
++ if (_hc->do_split) {
++ /* SPLITs always queue just once per channel */
++ return 0;
++ } else if (_hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
++ /* SETUPs are queued only once since they can't be NAKed. */
++ return 0;
++ } else if (_hc->ep_is_in) {
++ /*
++ * Always queue another request for other IN transfers. If
++ * back-to-back INs are issued and NAKs are received for both,
++ * the driver may still be processing the first NAK when the
++ * second NAK is received. When the interrupt handler clears
++ * the NAK interrupt for the first NAK, the second NAK will
++ * not be seen. So we can't depend on the NAK interrupt
++ * handler to requeue a NAKed request. Instead, IN requests
++ * are issued each time this function is called. When the
++ * transfer completes, the extra requests for the channel will
++ * be flushed.
++ */
++ hcchar_data_t hcchar;
++ dwc_otg_hc_regs_t *hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
++
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ hc_set_even_odd_frame(_core_if, _hc, &hcchar);
++ hcchar.b.chen = 1;
++ hcchar.b.chdis = 0;
++ DWC_DEBUGPL(DBG_HCDV, " IN xfer: hcchar = 0x%08x\n", hcchar.d32);
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++ _hc->requests++;
++ return 1;
++ } else {
++ /* OUT transfers. */
++ if (_hc->xfer_count < _hc->xfer_len) {
++ if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++ _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++ hcchar_data_t hcchar;
++ dwc_otg_hc_regs_t *hc_regs;
++ hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ hc_set_even_odd_frame(_core_if, _hc, &hcchar);
++ }
++
++ /* Load OUT packet into the appropriate Tx FIFO. */
++ dwc_otg_hc_write_packet(_core_if, _hc);
++ _hc->requests++;
++ return 1;
++ } else {
++ return 0;
++ }
++ }
++}
++
++/**
++ * Starts a PING transfer. This function should only be called in Slave mode.
++ * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled.
++ */
++void dwc_otg_hc_do_ping(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
++{
++ hcchar_data_t hcchar;
++ hctsiz_data_t hctsiz;
++ dwc_otg_hc_regs_t *hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
++
++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
++
++ hctsiz.d32 = 0;
++ hctsiz.b.dopng = 1;
++ hctsiz.b.pktcnt = 1;
++ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ hcchar.b.chen = 1;
++ hcchar.b.chdis = 0;
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++}
++
++/*
++ * This function writes a packet into the Tx FIFO associated with the Host
++ * Channel. For a channel associated with a non-periodic EP, the non-periodic
++ * Tx FIFO is written. For a channel associated with a periodic EP, the
++ * periodic Tx FIFO is written. This function should only be called in Slave
++ * mode.
++ *
++ * Upon return the xfer_buff and xfer_count fields in _hc are incremented by
++ * then number of bytes written to the Tx FIFO.
++ */
++void dwc_otg_hc_write_packet(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
++{
++ uint32_t i;
++ uint32_t remaining_count;
++ uint32_t byte_count;
++ uint32_t dword_count;
++
++ uint32_t *data_buff = (uint32_t *)(_hc->xfer_buff);
++ uint32_t *data_fifo = _core_if->data_fifo[_hc->hc_num];
++
++ remaining_count = _hc->xfer_len - _hc->xfer_count;
++ if (remaining_count > _hc->max_packet) {
++ byte_count = _hc->max_packet;
++ } else {
++ byte_count = remaining_count;
++ }
++
++ dword_count = (byte_count + 3) / 4;
++
++ if ((((unsigned long)data_buff) & 0x3) == 0) {
++ /* xfer_buff is DWORD aligned. */
++ for (i = 0; i < dword_count; i++, data_buff++) {
++ dwc_write_reg32(data_fifo, *data_buff);
++ }
++ } else {
++ /* xfer_buff is not DWORD aligned. */
++ for (i = 0; i < dword_count; i++, data_buff++) {
++ dwc_write_reg32(data_fifo, get_unaligned(data_buff));
++ }
++ }
++
++ _hc->xfer_count += byte_count;
++ _hc->xfer_buff += byte_count;
++}
++
++/**
++ * Gets the current USB frame number. This is the frame number from the last
++ * SOF packet.
++ */
++uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *_core_if)
++{
++ dsts_data_t dsts;
++ dsts.d32 = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->dsts);
++
++ /* read current frame/microfreme number from DSTS register */
++ return dsts.b.soffn;
++}
++
++/**
++ * This function reads a setup packet from the Rx FIFO into the destination
++ * buffer. This function is called from the Rx Status Queue Level (RxStsQLvl)
++ * Interrupt routine when a SETUP packet has been received in Slave mode.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _dest Destination buffer for packet data.
++ */
++void dwc_otg_read_setup_packet(dwc_otg_core_if_t *_core_if, uint32_t *_dest)
++{
++ /* Get the 8 bytes of a setup transaction data */
++
++ /* Pop 2 DWORDS off the receive data FIFO into memory */
++ _dest[0] = dwc_read_reg32(_core_if->data_fifo[0]);
++ _dest[1] = dwc_read_reg32(_core_if->data_fifo[0]);
++ //_dest[0] = dwc_read_datafifo32(_core_if->data_fifo[0]);
++ //_dest[1] = dwc_read_datafifo32(_core_if->data_fifo[0]);
++}
++
++
++/**
++ * This function enables EP0 OUT to receive SETUP packets and configures EP0
++ * IN for transmitting packets. It is normally called when the
++ * "Enumeration Done" interrupt occurs.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP0 data.
++ */
++void dwc_otg_ep0_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
++{
++ dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++ dsts_data_t dsts;
++ depctl_data_t diepctl;
++ depctl_data_t doepctl;
++ dctl_data_t dctl ={.d32=0};
++
++ /* Read the Device Status and Endpoint 0 Control registers */
++ dsts.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dsts);
++ diepctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl);
++ doepctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl);
++
++ /* Set the MPS of the IN EP based on the enumeration speed */
++ switch (dsts.b.enumspd) {
++ case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
++ case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
++ case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
++ diepctl.b.mps = DWC_DEP0CTL_MPS_64;
++ break;
++ case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
++ diepctl.b.mps = DWC_DEP0CTL_MPS_8;
++ break;
++ }
++
++ dwc_write_reg32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
++
++ /* Enable OUT EP for receive */
++ doepctl.b.epena = 1;
++ dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
++
++#ifdef VERBOSE
++ DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n",
++ dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
++ DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n",
++ dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl));
++#endif
++ dctl.b.cgnpinnak = 1;
++ dwc_modify_reg32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
++ DWC_DEBUGPL(DBG_PCDV,"dctl=%0x\n",
++ dwc_read_reg32(&dev_if->dev_global_regs->dctl));
++}
++
++/**
++ * This function activates an EP. The Device EP control register for
++ * the EP is configured as defined in the ep structure. Note: This
++ * function is not used for EP0.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP to activate.
++ */
++void dwc_otg_ep_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
++{
++ dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++ depctl_data_t depctl;
++ volatile uint32_t *addr;
++ daint_data_t daintmsk = {.d32=0};
++
++ DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, _ep->num,
++ (_ep->is_in?"IN":"OUT"));
++
++ /* Read DEPCTLn register */
++ if (_ep->is_in == 1) {
++ addr = &dev_if->in_ep_regs[_ep->num]->diepctl;
++ daintmsk.ep.in = 1<<_ep->num;
++ } else {
++ addr = &dev_if->out_ep_regs[_ep->num]->doepctl;
++ daintmsk.ep.out = 1<<_ep->num;
++ }
++
++ /* If the EP is already active don't change the EP Control
++ * register. */
++ depctl.d32 = dwc_read_reg32(addr);
++ if (!depctl.b.usbactep) {
++ depctl.b.mps = _ep->maxpacket;
++ depctl.b.eptype = _ep->type;
++ depctl.b.txfnum = _ep->tx_fifo_num;
++
++ if (_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++ depctl.b.setd0pid = 1; // ???
++ } else {
++ depctl.b.setd0pid = 1;
++ }
++ depctl.b.usbactep = 1;
++
++ dwc_write_reg32(addr, depctl.d32);
++ DWC_DEBUGPL(DBG_PCDV,"DEPCTL=%08x\n", dwc_read_reg32(addr));
++ }
++
++
++ /* Enable the Interrupt for this EP */
++ dwc_modify_reg32(&dev_if->dev_global_regs->daintmsk,
++ 0, daintmsk.d32);
++ DWC_DEBUGPL(DBG_PCDV,"DAINTMSK=%0x\n",
++ dwc_read_reg32(&dev_if->dev_global_regs->daintmsk));
++ _ep->stall_clear_flag = 0;
++ return;
++}
++
++/**
++ * This function deactivates an EP. This is done by clearing the USB Active
++ * EP bit in the Device EP control register. Note: This function is not used
++ * for EP0. EP0 cannot be deactivated.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP to deactivate.
++ */
++void dwc_otg_ep_deactivate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
++{
++ depctl_data_t depctl ={.d32 = 0};
++ volatile uint32_t *addr;
++ daint_data_t daintmsk = {.d32=0};
++
++ /* Read DEPCTLn register */
++ if (_ep->is_in == 1) {
++ addr = &_core_if->dev_if->in_ep_regs[_ep->num]->diepctl;
++ daintmsk.ep.in = 1<<_ep->num;
++ } else {
++ addr = &_core_if->dev_if->out_ep_regs[_ep->num]->doepctl;
++ daintmsk.ep.out = 1<<_ep->num;
++ }
++
++ depctl.b.usbactep = 0;
++ dwc_write_reg32(addr, depctl.d32);
++
++ /* Disable the Interrupt for this EP */
++ dwc_modify_reg32(&_core_if->dev_if->dev_global_regs->daintmsk,
++ daintmsk.d32, 0);
++
++ return;
++}
++
++/**
++ * This function does the setup for a data transfer for an EP and
++ * starts the transfer. For an IN transfer, the packets will be
++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
++ * the packets are unloaded from the Rx FIFO in the ISR. the ISR.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP to start the transfer on.
++ */
++void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
++{
++ /** @todo Refactor this funciton to check the transfer size
++ * count value does not execed the number bits in the Transfer
++ * count register. */
++ depctl_data_t depctl;
++ deptsiz_data_t deptsiz;
++ gintmsk_data_t intr_mask = { .d32 = 0};
++
++#ifdef CHECK_PACKET_COUNTER_WIDTH
++ const uint32_t MAX_XFER_SIZE =
++ _core_if->core_params->max_transfer_size;
++ const uint32_t MAX_PKT_COUNT =
++ _core_if->core_params->max_packet_count;
++ uint32_t num_packets;
++ uint32_t transfer_len;
++ dwc_otg_dev_out_ep_regs_t *out_regs =
++ _core_if->dev_if->out_ep_regs[_ep->num];
++ dwc_otg_dev_in_ep_regs_t *in_regs =
++ _core_if->dev_if->in_ep_regs[_ep->num];
++ gnptxsts_data_t txstatus;
++
++ int lvl = SET_DEBUG_LEVEL(DBG_PCD);
++
++
++ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
++ "xfer_buff=%p start_xfer_buff=%p\n",
++ _ep->num, (_ep->is_in?"IN":"OUT"), _ep->xfer_len,
++ _ep->xfer_count, _ep->xfer_buff, _ep->start_xfer_buff);
++
++ transfer_len = _ep->xfer_len - _ep->xfer_count;
++ if (transfer_len > MAX_XFER_SIZE) {
++ transfer_len = MAX_XFER_SIZE;
++ }
++ if (transfer_len == 0) {
++ num_packets = 1;
++ /* OUT EP to recieve Zero-length packet set transfer
++ * size to maxpacket size. */
++ if (!_ep->is_in) {
++ transfer_len = _ep->maxpacket;
++ }
++ } else {
++ num_packets =
++ (transfer_len + _ep->maxpacket - 1) / _ep->maxpacket;
++ if (num_packets > MAX_PKT_COUNT) {
++ num_packets = MAX_PKT_COUNT;
++ }
++ }
++ DWC_DEBUGPL(DBG_PCD, "transfer_len=%d #pckt=%d\n", transfer_len,
++ num_packets);
++
++ deptsiz.b.xfersize = transfer_len;
++ deptsiz.b.pktcnt = num_packets;
++
++ /* IN endpoint */
++ if (_ep->is_in == 1) {
++ depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
++ } else {/* OUT endpoint */
++ depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
++ }
++
++ /* EP enable, IN data in FIFO */
++ depctl.b.cnak = 1;
++ depctl.b.epena = 1;
++ /* IN endpoint */
++ if (_ep->is_in == 1) {
++ txstatus.d32 =
++ dwc_read_reg32(&_core_if->core_global_regs->gnptxsts);
++ if (txstatus.b.nptxqspcavail == 0) {
++ DWC_DEBUGPL(DBG_ANY, "TX Queue Full (0x%0x)\n",
++ txstatus.d32);
++ return;
++ }
++ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++ dwc_write_reg32(&in_regs->diepctl, depctl.d32);
++ /**
++ * Enable the Non-Periodic Tx FIFO empty interrupt, the
++ * data will be written into the fifo by the ISR.
++ */
++ if (_core_if->dma_enable) {
++ dwc_write_reg32(&in_regs->diepdma, (uint32_t) _ep->xfer_buff);
++ } else {
++ if (_core_if->en_multiple_tx_fifo == 0) {
++ intr_mask.b.nptxfempty = 1;
++ dwc_modify_reg32( &_core_if->core_global_regs->gintsts,
++ intr_mask.d32, 0);
++ dwc_modify_reg32( &_core_if->core_global_regs->gintmsk,
++ intr_mask.d32, intr_mask.d32);
++ } else {
++ /* Enable the Tx FIFO Empty Interrupt for this EP */
++ if (_ep->xfer_len > 0 &&
++ _ep->type != DWC_OTG_EP_TYPE_ISOC) {
++ uint32_t fifoemptymsk = 0;
++ fifoemptymsk = (0x1 << _ep->num);
++ dwc_modify_reg32(&_core_if->dev_if->dev_global_regs->
++ dtknqr4_fifoemptymsk,0, fifoemptymsk);
++ }
++ }
++ }
++ } else { /* OUT endpoint */
++ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++ dwc_write_reg32(&out_regs->doepctl, depctl.d32);
++ if (_core_if->dma_enable) {
++ dwc_write_reg32(&out_regs->doepdma,(uint32_t) _ep->xfer_buff);
++ }
++ }
++ DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n",
++ dwc_read_reg32(&out_regs->doepctl),
++ dwc_read_reg32(&out_regs->doeptsiz));
++ DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
++ dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk),
++ dwc_read_reg32(&_core_if->core_global_regs->gintmsk));
++
++ SET_DEBUG_LEVEL(lvl);
++#endif
++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
++
++ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
++ "xfer_buff=%p start_xfer_buff=%p\n",
++ _ep->num, (_ep->is_in?"IN":"OUT"), _ep->xfer_len,
++ _ep->xfer_count, _ep->xfer_buff, _ep->start_xfer_buff);
++
++ /* IN endpoint */
++ if (_ep->is_in == 1) {
++ dwc_otg_dev_in_ep_regs_t * in_regs = _core_if->dev_if->in_ep_regs[_ep->num];
++ gnptxsts_data_t gtxstatus;
++ gtxstatus.d32 = dwc_read_reg32(&_core_if->core_global_regs->gnptxsts);
++ if (_core_if->en_multiple_tx_fifo == 0 &&
++ gtxstatus.b.nptxqspcavail == 0) {
++#ifdef DEBUG
++ DWC_PRINT("TX Queue Full (0x%0x)\n", gtxstatus.d32);
++#endif
++ //return;
++ MDELAY(100); //james
++ }
++
++ depctl.d32 = dwc_read_reg32(&(in_regs->diepctl));
++ deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz));
++
++ /* Zero Length Packet? */
++ if (_ep->xfer_len == 0) {
++ deptsiz.b.xfersize = 0;
++ deptsiz.b.pktcnt = 1;
++ } else {
++
++ /* Program the transfer size and packet count
++ * as follows: xfersize = N * maxpacket +
++ * short_packet pktcnt = N + (short_packet
++ * exist ? 1 : 0)
++ */
++ deptsiz.b.xfersize = _ep->xfer_len;
++ deptsiz.b.pktcnt = (_ep->xfer_len - 1 + _ep->maxpacket) / _ep->maxpacket;
++ }
++
++ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++
++ /* Write the DMA register */
++ if (_core_if->dma_enable) {
++#if 1 // winder
++ dma_cache_wback_inv((unsigned long) _ep->xfer_buff, _ep->xfer_len); // winder
++ dwc_write_reg32 (&(in_regs->diepdma),
++ CPHYSADDR((uint32_t)_ep->xfer_buff)); // winder
++#else
++ dwc_write_reg32 (&(in_regs->diepdma),
++ (uint32_t)_ep->dma_addr);
++#endif
++ } else {
++ if (_ep->type != DWC_OTG_EP_TYPE_ISOC) {
++ /**
++ * Enable the Non-Periodic Tx FIFO empty interrupt,
++ * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
++ * the data will be written into the fifo by the ISR.
++ */
++ if (_core_if->en_multiple_tx_fifo == 0) {
++ intr_mask.b.nptxfempty = 1;
++ dwc_modify_reg32( &_core_if->core_global_regs->gintsts,
++ intr_mask.d32, 0);
++ dwc_modify_reg32( &_core_if->core_global_regs->gintmsk,
++ intr_mask.d32, intr_mask.d32);
++ } else {
++ /* Enable the Tx FIFO Empty Interrupt for this EP */
++ if (_ep->xfer_len > 0) {
++ uint32_t fifoemptymsk = 0;
++ fifoemptymsk = 1 << _ep->num;
++ dwc_modify_reg32(&_core_if->dev_if->dev_global_regs->
++ dtknqr4_fifoemptymsk,0,fifoemptymsk);
++ }
++ }
++ }
++ }
++
++ /* EP enable, IN data in FIFO */
++ depctl.b.cnak = 1;
++ depctl.b.epena = 1;
++ dwc_write_reg32(&in_regs->diepctl, depctl.d32);
++
++ if (_core_if->dma_enable) {
++ depctl.d32 = dwc_read_reg32 (&_core_if->dev_if->in_ep_regs[0]->diepctl);
++ depctl.b.nextep = _ep->num;
++ dwc_write_reg32 (&_core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32);
++
++ }
++ } else {
++ /* OUT endpoint */
++ dwc_otg_dev_out_ep_regs_t * out_regs = _core_if->dev_if->out_ep_regs[_ep->num];
++
++ depctl.d32 = dwc_read_reg32(&(out_regs->doepctl));
++ deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz));
++
++ /* Program the transfer size and packet count as follows:
++ *
++ * pktcnt = N
++ * xfersize = N * maxpacket
++ */
++ if (_ep->xfer_len == 0) {
++ /* Zero Length Packet */
++ deptsiz.b.xfersize = _ep->maxpacket;
++ deptsiz.b.pktcnt = 1;
++ } else {
++ deptsiz.b.pktcnt = (_ep->xfer_len + (_ep->maxpacket - 1)) / _ep->maxpacket;
++ deptsiz.b.xfersize = deptsiz.b.pktcnt * _ep->maxpacket;
++ }
++ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++
++ DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n",
++ _ep->num, deptsiz.b.xfersize, deptsiz.b.pktcnt);
++
++ if (_core_if->dma_enable) {
++#if 1 // winder
++ dwc_write_reg32 (&(out_regs->doepdma),
++ CPHYSADDR((uint32_t)_ep->xfer_buff)); // winder
++#else
++ dwc_write_reg32 (&(out_regs->doepdma),
++ (uint32_t)_ep->dma_addr);
++#endif
++ }
++
++ if (_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++ /** @todo NGS: dpid is read-only. Use setd0pid
++ * or setd1pid. */
++ if (_ep->even_odd_frame) {
++ depctl.b.setd1pid = 1;
++ } else {
++ depctl.b.setd0pid = 1;
++ }
++ }
++
++ /* EP enable */
++ depctl.b.cnak = 1;
++ depctl.b.epena = 1;
++
++ dwc_write_reg32(&out_regs->doepctl, depctl.d32);
++
++ DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n",
++ dwc_read_reg32(&out_regs->doepctl),
++ dwc_read_reg32(&out_regs->doeptsiz));
++ DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
++ dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk),
++ dwc_read_reg32(&_core_if->core_global_regs->gintmsk));
++ }
++}
++
++
++/**
++ * This function does the setup for a data transfer for EP0 and starts
++ * the transfer. For an IN transfer, the packets will be loaded into
++ * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are
++ * unloaded from the Rx FIFO in the ISR.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP0 data.
++ */
++void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
++{
++ volatile depctl_data_t depctl;
++ volatile deptsiz0_data_t deptsiz;
++ gintmsk_data_t intr_mask = { .d32 = 0};
++
++ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
++ "xfer_buff=%p start_xfer_buff=%p total_len=%d\n",
++ _ep->num, (_ep->is_in?"IN":"OUT"), _ep->xfer_len,
++ _ep->xfer_count, _ep->xfer_buff, _ep->start_xfer_buff,
++ _ep->total_len);
++ _ep->total_len = _ep->xfer_len;
++
++ /* IN endpoint */
++ if (_ep->is_in == 1) {
++ dwc_otg_dev_in_ep_regs_t * in_regs = _core_if->dev_if->in_ep_regs[0];
++ gnptxsts_data_t gtxstatus;
++ gtxstatus.d32 = dwc_read_reg32(&_core_if->core_global_regs->gnptxsts);
++ if (_core_if->en_multiple_tx_fifo == 0 &&
++ gtxstatus.b.nptxqspcavail == 0) {
++#ifdef DEBUG
++ deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
++ DWC_DEBUGPL(DBG_PCD,"DIEPCTL0=%0x\n",
++ dwc_read_reg32(&in_regs->diepctl));
++ DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n",
++ deptsiz.d32, deptsiz.b.xfersize,deptsiz.b.pktcnt);
++ DWC_PRINT("TX Queue or FIFO Full (0x%0x)\n", gtxstatus.d32);
++#endif /* */
++ printk("TX Queue or FIFO Full!!!!\n"); // test-only
++ //return;
++ MDELAY(100); //james
++ }
++
++ depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
++ deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
++
++ /* Zero Length Packet? */
++ if (_ep->xfer_len == 0) {
++ deptsiz.b.xfersize = 0;
++ deptsiz.b.pktcnt = 1;
++ } else {
++ /* Program the transfer size and packet count
++ * as follows: xfersize = N * maxpacket +
++ * short_packet pktcnt = N + (short_packet
++ * exist ? 1 : 0)
++ */
++ if (_ep->xfer_len > _ep->maxpacket) {
++ _ep->xfer_len = _ep->maxpacket;
++ deptsiz.b.xfersize = _ep->maxpacket;
++ }
++ else {
++ deptsiz.b.xfersize = _ep->xfer_len;
++ }
++ deptsiz.b.pktcnt = 1;
++
++ }
++ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++ DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n",
++ _ep->xfer_len, deptsiz.b.xfersize,deptsiz.b.pktcnt, deptsiz.d32);
++
++ /* Write the DMA register */
++ if (_core_if->dma_enable) {
++ dwc_write_reg32(&(in_regs->diepdma), (uint32_t) _ep->dma_addr);
++ }
++
++ /* EP enable, IN data in FIFO */
++ depctl.b.cnak = 1;
++ depctl.b.epena = 1;
++ dwc_write_reg32(&in_regs->diepctl, depctl.d32);
++
++ /**
++ * Enable the Non-Periodic Tx FIFO empty interrupt, the
++ * data will be written into the fifo by the ISR.
++ */
++ if (!_core_if->dma_enable) {
++ if (_core_if->en_multiple_tx_fifo == 0) {
++ intr_mask.b.nptxfempty = 1;
++ dwc_modify_reg32(&_core_if->core_global_regs->gintsts, intr_mask.d32, 0);
++ dwc_modify_reg32(&_core_if->core_global_regs->gintmsk, intr_mask.d32,
++ intr_mask.d32);
++ } else {
++ /* Enable the Tx FIFO Empty Interrupt for this EP */
++ if (_ep->xfer_len > 0) {
++ uint32_t fifoemptymsk = 0;
++ fifoemptymsk |= 1 << _ep->num;
++ dwc_modify_reg32(&_core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++ 0, fifoemptymsk);
++ }
++
++ }
++ }
++ } else {
++ /* OUT endpoint */
++ dwc_otg_dev_out_ep_regs_t * out_regs = _core_if->dev_if->out_ep_regs[_ep->num];
++
++ depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
++ deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);
++
++ /* Program the transfer size and packet count as follows:
++ * xfersize = N * (maxpacket + 4 - (maxpacket % 4))
++ * pktcnt = N */
++ if (_ep->xfer_len == 0) {
++ /* Zero Length Packet */
++ deptsiz.b.xfersize = _ep->maxpacket;
++ deptsiz.b.pktcnt = 1;
++ } else {
++ deptsiz.b.pktcnt = (_ep->xfer_len + (_ep->maxpacket - 1)) / _ep->maxpacket;
++ deptsiz.b.xfersize = deptsiz.b.pktcnt * _ep->maxpacket;
++ }
++
++ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
++ DWC_DEBUGPL(DBG_PCDV, "len=%d xfersize=%d pktcnt=%d\n",
++ _ep->xfer_len, deptsiz.b.xfersize,deptsiz.b.pktcnt);
++
++ if (_core_if->dma_enable) {
++ dwc_write_reg32(&(out_regs->doepdma), (uint32_t) _ep->dma_addr);
++ }
++
++ /* EP enable */
++ depctl.b.cnak = 1;
++ depctl.b.epena = 1;
++ dwc_write_reg32 (&(out_regs->doepctl), depctl.d32);
++ }
++}
++
++/**
++ * This function continues control IN transfers started by
++ * dwc_otg_ep0_start_transfer, when the transfer does not fit in a
++ * single packet. NOTE: The DIEPCTL0/DOEPCTL0 registers only have one
++ * bit for the packet count.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP0 data.
++ */
++void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
++{
++ depctl_data_t depctl;
++ deptsiz0_data_t deptsiz;
++ gintmsk_data_t intr_mask = { .d32 = 0};
++
++ if (_ep->is_in == 1) {
++ dwc_otg_dev_in_ep_regs_t *in_regs =
++ _core_if->dev_if->in_ep_regs[0];
++ gnptxsts_data_t tx_status = {.d32 = 0};
++
++ tx_status.d32 = dwc_read_reg32( &_core_if->core_global_regs->gnptxsts );
++ /** @todo Should there be check for room in the Tx
++ * Status Queue. If not remove the code above this comment. */
++
++ depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
++ deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
++
++ /* Program the transfer size and packet count
++ * as follows: xfersize = N * maxpacket +
++ * short_packet pktcnt = N + (short_packet
++ * exist ? 1 : 0)
++ */
++ deptsiz.b.xfersize = (_ep->total_len - _ep->xfer_count) > _ep->maxpacket ? _ep->maxpacket :
++ (_ep->total_len - _ep->xfer_count);
++ deptsiz.b.pktcnt = 1;
++ _ep->xfer_len += deptsiz.b.xfersize;
++
++ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
++ DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n",
++ _ep->xfer_len,
++ deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
++
++ /* Write the DMA register */
++ if (_core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
++ dwc_write_reg32 (&(in_regs->diepdma),
++ CPHYSADDR((uint32_t)_ep->dma_addr)); // winder
++ }
++
++ /* EP enable, IN data in FIFO */
++ depctl.b.cnak = 1;
++ depctl.b.epena = 1;
++ dwc_write_reg32(&in_regs->diepctl, depctl.d32);
++
++ /**
++ * Enable the Non-Periodic Tx FIFO empty interrupt, the
++ * data will be written into the fifo by the ISR.
++ */
++ if (!_core_if->dma_enable) {
++ /* First clear it from GINTSTS */
++ intr_mask.b.nptxfempty = 1;
++ dwc_write_reg32( &_core_if->core_global_regs->gintsts,
++ intr_mask.d32 );
++
++ dwc_modify_reg32( &_core_if->core_global_regs->gintmsk,
++ intr_mask.d32, intr_mask.d32);
++ }
++
++ }
++
++}
++
++#ifdef DEBUG
++void dump_msg(const u8 *buf, unsigned int length)
++{
++ unsigned int start, num, i;
++ char line[52], *p;
++
++ if (length >= 512)
++ return;
++ start = 0;
++ while (length > 0) {
++ num = min(length, 16u);
++ p = line;
++ for (i = 0; i < num; ++i) {
++ if (i == 8)
++ *p++ = ' ';
++ sprintf(p, " %02x", buf[i]);
++ p += 3;
++ }
++ *p = 0;
++ DWC_PRINT( "%6x: %s\n", start, line);
++ buf += num;
++ start += num;
++ length -= num;
++ }
++}
++#else
++static inline void dump_msg(const u8 *buf, unsigned int length)
++{
++}
++#endif
++
++/**
++ * This function writes a packet into the Tx FIFO associated with the
++ * EP. For non-periodic EPs the non-periodic Tx FIFO is written. For
++ * periodic EPs the periodic Tx FIFO associated with the EP is written
++ * with all packets for the next micro-frame.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP to write packet for.
++ * @param _dma Indicates if DMA is being used.
++ */
++void dwc_otg_ep_write_packet(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep, int _dma)
++{
++ /**
++ * The buffer is padded to DWORD on a per packet basis in
++ * slave/dma mode if the MPS is not DWORD aligned. The last
++ * packet, if short, is also padded to a multiple of DWORD.
++ *
++ * ep->xfer_buff always starts DWORD aligned in memory and is a
++ * multiple of DWORD in length
++ *
++ * ep->xfer_len can be any number of bytes
++ *
++ * ep->xfer_count is a multiple of ep->maxpacket until the last
++ * packet
++ *
++ * FIFO access is DWORD */
++
++ uint32_t i;
++ uint32_t byte_count;
++ uint32_t dword_count;
++ uint32_t *fifo;
++ uint32_t *data_buff = (uint32_t *)_ep->xfer_buff;
++
++ //DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, _core_if, _ep);
++ if (_ep->xfer_count >= _ep->xfer_len) {
++ DWC_WARN("%s() No data for EP%d!!!\n", __func__, _ep->num);
++ return;
++ }
++
++ /* Find the byte length of the packet either short packet or MPS */
++ if ((_ep->xfer_len - _ep->xfer_count) < _ep->maxpacket) {
++ byte_count = _ep->xfer_len - _ep->xfer_count;
++ }
++ else {
++ byte_count = _ep->maxpacket;
++ }
++
++ /* Find the DWORD length, padded by extra bytes as neccessary if MPS
++ * is not a multiple of DWORD */
++ dword_count = (byte_count + 3) / 4;
++
++#ifdef VERBOSE
++ dump_msg(_ep->xfer_buff, byte_count);
++#endif
++ if (_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++ /**@todo NGS Where are the Periodic Tx FIFO addresses
++ * intialized? What should this be? */
++ fifo = _core_if->data_fifo[_ep->tx_fifo_num];
++ } else {
++ fifo = _core_if->data_fifo[_ep->num];
++ }
++
++ DWC_DEBUGPL((DBG_PCDV|DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n",
++ fifo, data_buff, *data_buff, byte_count);
++
++
++ if (!_dma) {
++ for (i=0; i<dword_count; i++, data_buff++) {
++ dwc_write_reg32( fifo, *data_buff );
++ }
++ }
++
++ _ep->xfer_count += byte_count;
++ _ep->xfer_buff += byte_count;
++#if 1 // winder, why do we need this??
++ _ep->dma_addr += byte_count;
++#endif
++}
++
++/**
++ * Set the EP STALL.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP to set the stall on.
++ */
++void dwc_otg_ep_set_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
++{
++ depctl_data_t depctl;
++ volatile uint32_t *depctl_addr;
++
++ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, _ep->num,
++ (_ep->is_in?"IN":"OUT"));
++
++ if (_ep->is_in == 1) {
++ depctl_addr = &(_core_if->dev_if->in_ep_regs[_ep->num]->diepctl);
++ depctl.d32 = dwc_read_reg32(depctl_addr);
++
++ /* set the disable and stall bits */
++ if (depctl.b.epena) {
++ depctl.b.epdis = 1;
++ }
++ depctl.b.stall = 1;
++ dwc_write_reg32(depctl_addr, depctl.d32);
++
++ } else {
++ depctl_addr = &(_core_if->dev_if->out_ep_regs[_ep->num]->doepctl);
++ depctl.d32 = dwc_read_reg32(depctl_addr);
++
++ /* set the stall bit */
++ depctl.b.stall = 1;
++ dwc_write_reg32(depctl_addr, depctl.d32);
++ }
++ DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr));
++ return;
++}
++
++/**
++ * Clear the EP STALL.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _ep The EP to clear stall from.
++ */
++void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
++{
++ depctl_data_t depctl;
++ volatile uint32_t *depctl_addr;
++
++ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, _ep->num,
++ (_ep->is_in?"IN":"OUT"));
++
++ if (_ep->is_in == 1) {
++ depctl_addr = &(_core_if->dev_if->in_ep_regs[_ep->num]->diepctl);
++ } else {
++ depctl_addr = &(_core_if->dev_if->out_ep_regs[_ep->num]->doepctl);
++ }
++
++ depctl.d32 = dwc_read_reg32(depctl_addr);
++
++ /* clear the stall bits */
++ depctl.b.stall = 0;
++
++ /*
++ * USB Spec 9.4.5: For endpoints using data toggle, regardless
++ * of whether an endpoint has the Halt feature set, a
++ * ClearFeature(ENDPOINT_HALT) request always results in the
++ * data toggle being reinitialized to DATA0.
++ */
++ if (_ep->type == DWC_OTG_EP_TYPE_INTR ||
++ _ep->type == DWC_OTG_EP_TYPE_BULK) {
++ depctl.b.setd0pid = 1; /* DATA0 */
++ }
++
++ dwc_write_reg32(depctl_addr, depctl.d32);
++ DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr));
++ return;
++}
++
++/**
++ * This function reads a packet from the Rx FIFO into the destination
++ * buffer. To read SETUP data use dwc_otg_read_setup_packet.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _dest Destination buffer for the packet.
++ * @param _bytes Number of bytes to copy to the destination.
++ */
++void dwc_otg_read_packet(dwc_otg_core_if_t *_core_if,
++ uint8_t *_dest,
++ uint16_t _bytes)
++{
++ int i;
++ int word_count = (_bytes + 3) / 4;
++
++ volatile uint32_t *fifo = _core_if->data_fifo[0];
++ uint32_t *data_buff = (uint32_t *)_dest;
++
++ /**
++ * @todo Account for the case where _dest is not dword aligned. This
++ * requires reading data from the FIFO into a uint32_t temp buffer,
++ * then moving it into the data buffer.
++ */
++
++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__,
++ _core_if, _dest, _bytes);
++
++ for (i=0; i<word_count; i++, data_buff++) {
++ *data_buff = dwc_read_reg32(fifo);
++ }
++
++ return;
++}
++
++
++#ifdef DEBUG
++/**
++ * This functions reads the device registers and prints them
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *_core_if)
++{
++ int i;
++ volatile uint32_t *addr;
++
++ DWC_PRINT("Device Global Registers\n");
++ addr=&_core_if->dev_if->dev_global_regs->dcfg;
++ DWC_PRINT("DCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->dev_if->dev_global_regs->dctl;
++ DWC_PRINT("DCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->dev_if->dev_global_regs->dsts;
++ DWC_PRINT("DSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->dev_if->dev_global_regs->diepmsk;
++ DWC_PRINT("DIEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->dev_if->dev_global_regs->doepmsk;
++ DWC_PRINT("DOEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->dev_if->dev_global_regs->daint;
++ DWC_PRINT("DAINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->dev_if->dev_global_regs->dtknqr1;
++ DWC_PRINT("DTKNQR1 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ if (_core_if->hwcfg2.b.dev_token_q_depth > 6) {
++ addr=&_core_if->dev_if->dev_global_regs->dtknqr2;
++ DWC_PRINT("DTKNQR2 @0x%08X : 0x%08X\n",
++ (uint32_t)addr,dwc_read_reg32(addr));
++ }
++
++ addr=&_core_if->dev_if->dev_global_regs->dvbusdis;
++ DWC_PRINT("DVBUSID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++ addr=&_core_if->dev_if->dev_global_regs->dvbuspulse;
++ DWC_PRINT("DVBUSPULSE @0x%08X : 0x%08X\n",
++ (uint32_t)addr,dwc_read_reg32(addr));
++
++ if (_core_if->hwcfg2.b.dev_token_q_depth > 14) {
++ addr = &_core_if->dev_if->dev_global_regs->dtknqr3_dthrctl;
++ DWC_PRINT("DTKNQR3 @0x%08X : 0x%08X\n",
++ (uint32_t)addr, dwc_read_reg32(addr));
++ }
++
++ if (_core_if->hwcfg2.b.dev_token_q_depth > 22) {
++ addr = &_core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
++ DWC_PRINT("DTKNQR4 @0x%08X : 0x%08X\n", (uint32_t) addr,
++ dwc_read_reg32(addr));
++ }
++ for (i = 0; i <= _core_if->dev_if->num_in_eps; i++) {
++ DWC_PRINT("Device IN EP %d Registers\n", i);
++ addr=&_core_if->dev_if->in_ep_regs[i]->diepctl;
++ DWC_PRINT("DIEPCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->dev_if->in_ep_regs[i]->diepint;
++ DWC_PRINT("DIEPINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->dev_if->in_ep_regs[i]->dieptsiz;
++ DWC_PRINT("DIETSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->dev_if->in_ep_regs[i]->diepdma;
++ DWC_PRINT("DIEPDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++addr = &_core_if->dev_if->in_ep_regs[i]->dtxfsts;
++ DWC_PRINT("DTXFSTS @0x%08X : 0x%08X\n", (uint32_t) addr,
++ dwc_read_reg32(addr));
++ }
++ for (i = 0; i <= _core_if->dev_if->num_out_eps; i++) {
++ DWC_PRINT("Device OUT EP %d Registers\n", i);
++ addr=&_core_if->dev_if->out_ep_regs[i]->doepctl;
++ DWC_PRINT("DOEPCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->dev_if->out_ep_regs[i]->doepfn;
++ DWC_PRINT("DOEPFN @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->dev_if->out_ep_regs[i]->doepint;
++ DWC_PRINT("DOEPINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->dev_if->out_ep_regs[i]->doeptsiz;
++ DWC_PRINT("DOETSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->dev_if->out_ep_regs[i]->doepdma;
++ DWC_PRINT("DOEPDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ }
++ return;
++}
++
++/**
++ * This function reads the host registers and prints them
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_host_registers(dwc_otg_core_if_t *_core_if)
++{
++ int i;
++ volatile uint32_t *addr;
++
++ DWC_PRINT("Host Global Registers\n");
++ addr=&_core_if->host_if->host_global_regs->hcfg;
++ DWC_PRINT("HCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->host_if->host_global_regs->hfir;
++ DWC_PRINT("HFIR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->host_if->host_global_regs->hfnum;
++ DWC_PRINT("HFNUM @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->host_if->host_global_regs->hptxsts;
++ DWC_PRINT("HPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->host_if->host_global_regs->haint;
++ DWC_PRINT("HAINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->host_if->host_global_regs->haintmsk;
++ DWC_PRINT("HAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=_core_if->host_if->hprt0;
++ DWC_PRINT("HPRT0 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++ for (i=0; i<_core_if->core_params->host_channels; i++) {
++ DWC_PRINT("Host Channel %d Specific Registers\n", i);
++ addr=&_core_if->host_if->hc_regs[i]->hcchar;
++ DWC_PRINT("HCCHAR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->host_if->hc_regs[i]->hcsplt;
++ DWC_PRINT("HCSPLT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->host_if->hc_regs[i]->hcint;
++ DWC_PRINT("HCINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->host_if->hc_regs[i]->hcintmsk;
++ DWC_PRINT("HCINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->host_if->hc_regs[i]->hctsiz;
++ DWC_PRINT("HCTSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->host_if->hc_regs[i]->hcdma;
++ DWC_PRINT("HCDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++ }
++ return;
++}
++
++/**
++ * This function reads the core global registers and prints them
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_global_registers(dwc_otg_core_if_t *_core_if)
++{
++ int i;
++ volatile uint32_t *addr;
++
++ DWC_PRINT("Core Global Registers\n");
++ addr=&_core_if->core_global_regs->gotgctl;
++ DWC_PRINT("GOTGCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->core_global_regs->gotgint;
++ DWC_PRINT("GOTGINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->core_global_regs->gahbcfg;
++ DWC_PRINT("GAHBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->core_global_regs->gusbcfg;
++ DWC_PRINT("GUSBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->core_global_regs->grstctl;
++ DWC_PRINT("GRSTCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->core_global_regs->gintsts;
++ DWC_PRINT("GINTSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->core_global_regs->gintmsk;
++ DWC_PRINT("GINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->core_global_regs->grxstsr;
++ DWC_PRINT("GRXSTSR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ //addr=&_core_if->core_global_regs->grxstsp;
++ //DWC_PRINT("GRXSTSP @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->core_global_regs->grxfsiz;
++ DWC_PRINT("GRXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->core_global_regs->gnptxfsiz;
++ DWC_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->core_global_regs->gnptxsts;
++ DWC_PRINT("GNPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->core_global_regs->gi2cctl;
++ DWC_PRINT("GI2CCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->core_global_regs->gpvndctl;
++ DWC_PRINT("GPVNDCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->core_global_regs->ggpio;
++ DWC_PRINT("GGPIO @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->core_global_regs->guid;
++ DWC_PRINT("GUID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->core_global_regs->gsnpsid;
++ DWC_PRINT("GSNPSID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->core_global_regs->ghwcfg1;
++ DWC_PRINT("GHWCFG1 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->core_global_regs->ghwcfg2;
++ DWC_PRINT("GHWCFG2 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->core_global_regs->ghwcfg3;
++ DWC_PRINT("GHWCFG3 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->core_global_regs->ghwcfg4;
++ DWC_PRINT("GHWCFG4 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++ addr=&_core_if->core_global_regs->hptxfsiz;
++ DWC_PRINT("HPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
++
++ for (i=0; i<_core_if->hwcfg4.b.num_dev_perio_in_ep; i++) {
++ addr=&_core_if->core_global_regs->dptxfsiz_dieptxf[i];
++ DWC_PRINT("DPTXFSIZ[%d] @0x%08X : 0x%08X\n",i,(uint32_t)addr,dwc_read_reg32(addr));
++ }
++
++}
++#endif
++
++/**
++ * Flush a Tx FIFO.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _num Tx FIFO to flush.
++ */
++extern void dwc_otg_flush_tx_fifo( dwc_otg_core_if_t *_core_if,
++ const int _num )
++{
++ dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
++ volatile grstctl_t greset = { .d32 = 0};
++ int count = 0;
++
++ DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "Flush Tx FIFO %d\n", _num);
++
++ greset.b.txfflsh = 1;
++ greset.b.txfnum = _num;
++ dwc_write_reg32( &global_regs->grstctl, greset.d32 );
++
++ do {
++ greset.d32 = dwc_read_reg32( &global_regs->grstctl);
++ if (++count > 10000){
++ DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
++ __func__, greset.d32,
++ dwc_read_reg32( &global_regs->gnptxsts));
++ break;
++ }
++
++ udelay(1);
++ } while (greset.b.txfflsh == 1);
++ /* Wait for 3 PHY Clocks*/
++ UDELAY(1);
++}
++
++/**
++ * Flush Rx FIFO.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++extern void dwc_otg_flush_rx_fifo( dwc_otg_core_if_t *_core_if )
++{
++ dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
++ volatile grstctl_t greset = { .d32 = 0};
++ int count = 0;
++
++ DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__);
++ /*
++ *
++ */
++ greset.b.rxfflsh = 1;
++ dwc_write_reg32( &global_regs->grstctl, greset.d32 );
++
++ do {
++ greset.d32 = dwc_read_reg32( &global_regs->grstctl);
++ if (++count > 10000){
++ DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__,
++ greset.d32);
++ break;
++ }
++ } while (greset.b.rxfflsh == 1);
++ /* Wait for 3 PHY Clocks*/
++ UDELAY(1);
++}
++
++/**
++ * Do core a soft reset of the core. Be careful with this because it
++ * resets all the internal state machines of the core.
++ */
++
++void dwc_otg_core_reset(dwc_otg_core_if_t *_core_if)
++{
++ dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
++ volatile grstctl_t greset = { .d32 = 0};
++ int count = 0;
++
++ DWC_DEBUGPL(DBG_CILV, "%s\n", __func__);
++ /* Wait for AHB master IDLE state. */
++ do {
++ UDELAY(10);
++ greset.d32 = dwc_read_reg32( &global_regs->grstctl);
++ if (++count > 100000){
++ DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x %x\n", __func__,
++ greset.d32, greset.b.ahbidle);
++ return;
++ }
++ } while (greset.b.ahbidle == 0);
++
++// winder add.
++#if 1
++ /* Note: Actually, I don't exactly why we need to put delay here. */
++ MDELAY(100);
++#endif
++ /* Core Soft Reset */
++ count = 0;
++ greset.b.csftrst = 1;
++ dwc_write_reg32( &global_regs->grstctl, greset.d32 );
++// winder add.
++#if 1
++ /* Note: Actually, I don't exactly why we need to put delay here. */
++ MDELAY(100);
++#endif
++ do {
++ greset.d32 = dwc_read_reg32( &global_regs->grstctl);
++ if (++count > 10000){
++ DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", __func__,
++ greset.d32);
++ break;
++ }
++ udelay(1);
++ } while (greset.b.csftrst == 1);
++ /* Wait for 3 PHY Clocks*/
++ //DWC_PRINT("100ms\n");
++ MDELAY(100);
++}
++
++
++
++/**
++ * Register HCD callbacks. The callbacks are used to start and stop
++ * the HCD for interrupt processing.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _cb the HCD callback structure.
++ * @param _p pointer to be passed to callback function (usb_hcd*).
++ */
++extern void dwc_otg_cil_register_hcd_callbacks( dwc_otg_core_if_t *_core_if,
++ dwc_otg_cil_callbacks_t *_cb,
++ void *_p)
++{
++ _core_if->hcd_cb = _cb;
++ _cb->p = _p;
++}
++
++/**
++ * Register PCD callbacks. The callbacks are used to start and stop
++ * the PCD for interrupt processing.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ * @param _cb the PCD callback structure.
++ * @param _p pointer to be passed to callback function (pcd*).
++ */
++extern void dwc_otg_cil_register_pcd_callbacks( dwc_otg_core_if_t *_core_if,
++ dwc_otg_cil_callbacks_t *_cb,
++ void *_p)
++{
++ _core_if->pcd_cb = _cb;
++ _cb->p = _p;
++}
++
+diff --git a/drivers/usb/dwc_otg/dwc_otg_cil.h b/drivers/usb/dwc_otg/dwc_otg_cil.h
+new file mode 100644
+index 0000000..bbb9516
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_cil.h
+@@ -0,0 +1,911 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_cil.h $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 631780 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_CIL_H__)
++#define __DWC_CIL_H__
++
++#include "dwc_otg_plat.h"
++
++#include "dwc_otg_regs.h"
++#ifdef DEBUG
++#include "linux/timer.h"
++#endif
++
++/* the OTG capabilities. */
++#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0
++#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1
++#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
++/* the maximum speed of operation in host and device mode. */
++#define DWC_SPEED_PARAM_HIGH 0
++#define DWC_SPEED_PARAM_FULL 1
++/* the PHY clock rate in low power mode when connected to a
++ * Low Speed device in host mode. */
++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0
++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1
++/* the type of PHY interface to use. */
++#define DWC_PHY_TYPE_PARAM_FS 0
++#define DWC_PHY_TYPE_PARAM_UTMI 1
++#define DWC_PHY_TYPE_PARAM_ULPI 2
++/* whether to use the internal or external supply to
++ * drive the vbus with a ULPI phy. */
++#define DWC_PHY_ULPI_INTERNAL_VBUS 0
++#define DWC_PHY_ULPI_EXTERNAL_VBUS 1
++/* EP type. */
++
++/**
++ * @file
++ * This file contains the interface to the Core Interface Layer.
++ */
++
++/**
++ * The <code>dwc_ep</code> structure represents the state of a single
++ * endpoint when acting in device mode. It contains the data items
++ * needed for an endpoint to be activated and transfer packets.
++ */
++typedef struct dwc_ep {
++ /** EP number used for register address lookup */
++ uint8_t num;
++ /** EP direction 0 = OUT */
++ unsigned is_in : 1;
++ /** EP active. */
++ unsigned active : 1;
++
++ /** Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic Tx FIFO
++ If dedicated Tx FIFOs are enabled for all IN Eps - Tx FIFO # FOR IN EPs*/
++ unsigned tx_fifo_num : 4;
++ /** EP type: 0 - Control, 1 - ISOC, 2 - BULK, 3 - INTR */
++ unsigned type : 2;
++#define DWC_OTG_EP_TYPE_CONTROL 0
++#define DWC_OTG_EP_TYPE_ISOC 1
++#define DWC_OTG_EP_TYPE_BULK 2
++#define DWC_OTG_EP_TYPE_INTR 3
++
++ /** DATA start PID for INTR and BULK EP */
++ unsigned data_pid_start : 1;
++ /** Frame (even/odd) for ISOC EP */
++ unsigned even_odd_frame : 1;
++ /** Max Packet bytes */
++ unsigned maxpacket : 11;
++
++ /** @name Transfer state */
++ /** @{ */
++
++ /**
++ * Pointer to the beginning of the transfer buffer -- do not modify
++ * during transfer.
++ */
++
++ uint32_t dma_addr;
++
++ uint8_t *start_xfer_buff;
++ /** pointer to the transfer buffer */
++ uint8_t *xfer_buff;
++ /** Number of bytes to transfer */
++ unsigned xfer_len : 19;
++ /** Number of bytes transferred. */
++ unsigned xfer_count : 19;
++ /** Sent ZLP */
++ unsigned sent_zlp : 1;
++ /** Total len for control transfer */
++ unsigned total_len : 19;
++
++ /** stall clear flag */
++ unsigned stall_clear_flag : 1;
++
++ /** @} */
++} dwc_ep_t;
++
++/*
++ * Reasons for halting a host channel.
++ */
++typedef enum dwc_otg_halt_status {
++ DWC_OTG_HC_XFER_NO_HALT_STATUS,
++ DWC_OTG_HC_XFER_COMPLETE,
++ DWC_OTG_HC_XFER_URB_COMPLETE,
++ DWC_OTG_HC_XFER_ACK,
++ DWC_OTG_HC_XFER_NAK,
++ DWC_OTG_HC_XFER_NYET,
++ DWC_OTG_HC_XFER_STALL,
++ DWC_OTG_HC_XFER_XACT_ERR,
++ DWC_OTG_HC_XFER_FRAME_OVERRUN,
++ DWC_OTG_HC_XFER_BABBLE_ERR,
++ DWC_OTG_HC_XFER_DATA_TOGGLE_ERR,
++ DWC_OTG_HC_XFER_AHB_ERR,
++ DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE,
++ DWC_OTG_HC_XFER_URB_DEQUEUE
++} dwc_otg_halt_status_e;
++
++/**
++ * Host channel descriptor. This structure represents the state of a single
++ * host channel when acting in host mode. It contains the data items needed to
++ * transfer packets to an endpoint via a host channel.
++ */
++typedef struct dwc_hc {
++ /** Host channel number used for register address lookup */
++ uint8_t hc_num;
++
++ /** Device to access */
++ unsigned dev_addr : 7;
++
++ /** EP to access */
++ unsigned ep_num : 4;
++
++ /** EP direction. 0: OUT, 1: IN */
++ unsigned ep_is_in : 1;
++
++ /**
++ * EP speed.
++ * One of the following values:
++ * - DWC_OTG_EP_SPEED_LOW
++ * - DWC_OTG_EP_SPEED_FULL
++ * - DWC_OTG_EP_SPEED_HIGH
++ */
++ unsigned speed : 2;
++#define DWC_OTG_EP_SPEED_LOW 0
++#define DWC_OTG_EP_SPEED_FULL 1
++#define DWC_OTG_EP_SPEED_HIGH 2
++
++ /**
++ * Endpoint type.
++ * One of the following values:
++ * - DWC_OTG_EP_TYPE_CONTROL: 0
++ * - DWC_OTG_EP_TYPE_ISOC: 1
++ * - DWC_OTG_EP_TYPE_BULK: 2
++ * - DWC_OTG_EP_TYPE_INTR: 3
++ */
++ unsigned ep_type : 2;
++
++ /** Max packet size in bytes */
++ unsigned max_packet : 11;
++
++ /**
++ * PID for initial transaction.
++ * 0: DATA0,<br>
++ * 1: DATA2,<br>
++ * 2: DATA1,<br>
++ * 3: MDATA (non-Control EP),
++ * SETUP (Control EP)
++ */
++ unsigned data_pid_start : 2;
++#define DWC_OTG_HC_PID_DATA0 0
++#define DWC_OTG_HC_PID_DATA2 1
++#define DWC_OTG_HC_PID_DATA1 2
++#define DWC_OTG_HC_PID_MDATA 3
++#define DWC_OTG_HC_PID_SETUP 3
++
++ /** Number of periodic transactions per (micro)frame */
++ unsigned multi_count: 2;
++
++ /** @name Transfer State */
++ /** @{ */
++
++ /** Pointer to the current transfer buffer position. */
++ uint8_t *xfer_buff;
++ /** Total number of bytes to transfer. */
++ uint32_t xfer_len;
++ /** Number of bytes transferred so far. */
++ uint32_t xfer_count;
++ /** Packet count at start of transfer.*/
++ uint16_t start_pkt_count;
++
++ /**
++ * Flag to indicate whether the transfer has been started. Set to 1 if
++ * it has been started, 0 otherwise.
++ */
++ uint8_t xfer_started;
++
++ /**
++ * Set to 1 to indicate that a PING request should be issued on this
++ * channel. If 0, process normally.
++ */
++ uint8_t do_ping;
++
++ /**
++ * Set to 1 to indicate that the error count for this transaction is
++ * non-zero. Set to 0 if the error count is 0.
++ */
++ uint8_t error_state;
++
++ /**
++ * Set to 1 to indicate that this channel should be halted the next
++ * time a request is queued for the channel. This is necessary in
++ * slave mode if no request queue space is available when an attempt
++ * is made to halt the channel.
++ */
++ uint8_t halt_on_queue;
++
++ /**
++ * Set to 1 if the host channel has been halted, but the core is not
++ * finished flushing queued requests. Otherwise 0.
++ */
++ uint8_t halt_pending;
++
++ /**
++ * Reason for halting the host channel.
++ */
++ dwc_otg_halt_status_e halt_status;
++
++ /*
++ * Split settings for the host channel
++ */
++ uint8_t do_split; /**< Enable split for the channel */
++ uint8_t complete_split; /**< Enable complete split */
++ uint8_t hub_addr; /**< Address of high speed hub */
++
++ uint8_t port_addr; /**< Port of the low/full speed device */
++ /** Split transaction position
++ * One of the following values:
++ * - DWC_HCSPLIT_XACTPOS_MID
++ * - DWC_HCSPLIT_XACTPOS_BEGIN
++ * - DWC_HCSPLIT_XACTPOS_END
++ * - DWC_HCSPLIT_XACTPOS_ALL */
++ uint8_t xact_pos;
++
++ /** Set when the host channel does a short read. */
++ uint8_t short_read;
++
++ /**
++ * Number of requests issued for this channel since it was assigned to
++ * the current transfer (not counting PINGs).
++ */
++ uint8_t requests;
++
++ /**
++ * Queue Head for the transfer being processed by this channel.
++ */
++ struct dwc_otg_qh *qh;
++
++ /** @} */
++
++ /** Entry in list of host channels. */
++ struct list_head hc_list_entry;
++} dwc_hc_t;
++
++/**
++ * The following parameters may be specified when starting the module. These
++ * parameters define how the DWC_otg controller should be configured.
++ * Parameter values are passed to the CIL initialization function
++ * dwc_otg_cil_init.
++ */
++
++typedef struct dwc_otg_core_params
++{
++ int32_t opt;
++//#define dwc_param_opt_default 1
++ /**
++ * Specifies the OTG capabilities. The driver will automatically
++ * detect the value for this parameter if none is specified.
++ * 0 - HNP and SRP capable (default)
++ * 1 - SRP Only capable
++ * 2 - No HNP/SRP capable
++ */
++ int32_t otg_cap;
++#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0
++#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1
++#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
++//#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE
++ /**
++ * Specifies whether to use slave or DMA mode for accessing the data
++ * FIFOs. The driver will automatically detect the value for this
++ * parameter if none is specified.
++ * 0 - Slave
++ * 1 - DMA (default, if available)
++ */
++ int32_t dma_enable;
++//#define dwc_param_dma_enable_default 1
++ /** The DMA Burst size (applicable only for External DMA
++ * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32)
++ */
++ int32_t dma_burst_size; /* Translate this to GAHBCFG values */
++//#define dwc_param_dma_burst_size_default 32
++ /**
++ * Specifies the maximum speed of operation in host and device mode.
++ * The actual speed depends on the speed of the attached device and
++ * the value of phy_type. The actual speed depends on the speed of the
++ * attached device.
++ * 0 - High Speed (default)
++ * 1 - Full Speed
++ */
++ int32_t speed;
++//#define dwc_param_speed_default 0
++#define DWC_SPEED_PARAM_HIGH 0
++#define DWC_SPEED_PARAM_FULL 1
++
++ /** Specifies whether low power mode is supported when attached
++ * to a Full Speed or Low Speed device in host mode.
++ * 0 - Don't support low power mode (default)
++ * 1 - Support low power mode
++ */
++ int32_t host_support_fs_ls_low_power;
++//#define dwc_param_host_support_fs_ls_low_power_default 0
++ /** Specifies the PHY clock rate in low power mode when connected to a
++ * Low Speed device in host mode. This parameter is applicable only if
++ * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS
++ * then defaults to 6 MHZ otherwise 48 MHZ.
++ *
++ * 0 - 48 MHz
++ * 1 - 6 MHz
++ */
++ int32_t host_ls_low_power_phy_clk;
++//#define dwc_param_host_ls_low_power_phy_clk_default 0
++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0
++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1
++ /**
++ * 0 - Use cC FIFO size parameters
++ * 1 - Allow dynamic FIFO sizing (default)
++ */
++ int32_t enable_dynamic_fifo;
++//#define dwc_param_enable_dynamic_fifo_default 1
++ /** Total number of 4-byte words in the data FIFO memory. This
++ * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic
++ * Tx FIFOs.
++ * 32 to 32768 (default 8192)
++ * Note: The total FIFO memory depth in the FPGA configuration is 8192.
++ */
++ int32_t data_fifo_size;
++//#define dwc_param_data_fifo_size_default 8192
++ /** Number of 4-byte words in the Rx FIFO in device mode when dynamic
++ * FIFO sizing is enabled.
++ * 16 to 32768 (default 1064)
++ */
++ int32_t dev_rx_fifo_size;
++//#define dwc_param_dev_rx_fifo_size_default 1064
++ /** Number of 4-byte words in the non-periodic Tx FIFO in device mode
++ * when dynamic FIFO sizing is enabled.
++ * 16 to 32768 (default 1024)
++ */
++ int32_t dev_nperio_tx_fifo_size;
++//#define dwc_param_dev_nperio_tx_fifo_size_default 1024
++ /** Number of 4-byte words in each of the periodic Tx FIFOs in device
++ * mode when dynamic FIFO sizing is enabled.
++ * 4 to 768 (default 256)
++ */
++ uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS];
++//#define dwc_param_dev_perio_tx_fifo_size_default 256
++ /** Number of 4-byte words in the Rx FIFO in host mode when dynamic
++ * FIFO sizing is enabled.
++ * 16 to 32768 (default 1024)
++ */
++ int32_t host_rx_fifo_size;
++//#define dwc_param_host_rx_fifo_size_default 1024
++ /** Number of 4-byte words in the non-periodic Tx FIFO in host mode
++ * when Dynamic FIFO sizing is enabled in the core.
++ * 16 to 32768 (default 1024)
++ */
++ int32_t host_nperio_tx_fifo_size;
++//#define dwc_param_host_nperio_tx_fifo_size_default 1024
++ /** Number of 4-byte words in the host periodic Tx FIFO when dynamic
++ * FIFO sizing is enabled.
++ * 16 to 32768 (default 1024)
++ */
++ int32_t host_perio_tx_fifo_size;
++//#define dwc_param_host_perio_tx_fifo_size_default 1024
++ /** The maximum transfer size supported in bytes.
++ * 2047 to 65,535 (default 65,535)
++ */
++ int32_t max_transfer_size;
++//#define dwc_param_max_transfer_size_default 65535
++ /** The maximum number of packets in a transfer.
++ * 15 to 511 (default 511)
++ */
++ int32_t max_packet_count;
++//#define dwc_param_max_packet_count_default 511
++ /** The number of host channel registers to use.
++ * 1 to 16 (default 12)
++ * Note: The FPGA configuration supports a maximum of 12 host channels.
++ */
++ int32_t host_channels;
++//#define dwc_param_host_channels_default 12
++ /** The number of endpoints in addition to EP0 available for device
++ * mode operations.
++ * 1 to 15 (default 6 IN and OUT)
++ * Note: The FPGA configuration supports a maximum of 6 IN and OUT
++ * endpoints in addition to EP0.
++ */
++ int32_t dev_endpoints;
++//#define dwc_param_dev_endpoints_default 6
++ /**
++ * Specifies the type of PHY interface to use. By default, the driver
++ * will automatically detect the phy_type.
++ *
++ * 0 - Full Speed PHY
++ * 1 - UTMI+ (default)
++ * 2 - ULPI
++ */
++ int32_t phy_type;
++#define DWC_PHY_TYPE_PARAM_FS 0
++#define DWC_PHY_TYPE_PARAM_UTMI 1
++#define DWC_PHY_TYPE_PARAM_ULPI 2
++//#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI
++ /**
++ * Specifies the UTMI+ Data Width. This parameter is
++ * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI
++ * PHY_TYPE, this parameter indicates the data width between
++ * the MAC and the ULPI Wrapper.) Also, this parameter is
++ * applicable only if the OTG_HSPHY_WIDTH cC parameter was set
++ * to "8 and 16 bits", meaning that the core has been
++ * configured to work at either data path width.
++ *
++ * 8 or 16 bits (default 16)
++ */
++ int32_t phy_utmi_width;
++//#define dwc_param_phy_utmi_width_default 16
++ /**
++ * Specifies whether the ULPI operates at double or single
++ * data rate. This parameter is only applicable if PHY_TYPE is
++ * ULPI.
++ *
++ * 0 - single data rate ULPI interface with 8 bit wide data
++ * bus (default)
++ * 1 - double data rate ULPI interface with 4 bit wide data
++ * bus
++ */
++ int32_t phy_ulpi_ddr;
++//#define dwc_param_phy_ulpi_ddr_default 0
++ /**
++ * Specifies whether to use the internal or external supply to
++ * drive the vbus with a ULPI phy.
++ */
++ int32_t phy_ulpi_ext_vbus;
++#define DWC_PHY_ULPI_INTERNAL_VBUS 0
++#define DWC_PHY_ULPI_EXTERNAL_VBUS 1
++//#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS
++ /**
++ * Specifies whether to use the I2Cinterface for full speed PHY. This
++ * parameter is only applicable if PHY_TYPE is FS.
++ * 0 - No (default)
++ * 1 - Yes
++ */
++ int32_t i2c_enable;
++//#define dwc_param_i2c_enable_default 0
++
++ int32_t ulpi_fs_ls;
++//#define dwc_param_ulpi_fs_ls_default 0
++
++ int32_t ts_dline;
++//#define dwc_param_ts_dline_default 0
++
++ /**
++ * Specifies whether dedicated transmit FIFOs are
++ * enabled for non periodic IN endpoints in device mode
++ * 0 - No
++ * 1 - Yes
++ */
++ int32_t en_multiple_tx_fifo;
++#define dwc_param_en_multiple_tx_fifo_default 1
++
++ /** Number of 4-byte words in each of the Tx FIFOs in device
++ * mode when dynamic FIFO sizing is enabled.
++ * 4 to 768 (default 256)
++ */
++ uint32_t dev_tx_fifo_size[MAX_TX_FIFOS];
++#define dwc_param_dev_tx_fifo_size_default 256
++
++ /** Thresholding enable flag-
++ * bit 0 - enable non-ISO Tx thresholding
++ * bit 1 - enable ISO Tx thresholding
++ * bit 2 - enable Rx thresholding
++ */
++ uint32_t thr_ctl;
++#define dwc_param_thr_ctl_default 0
++
++ /** Thresholding length for Tx
++ * FIFOs in 32 bit DWORDs
++ */
++ uint32_t tx_thr_length;
++#define dwc_param_tx_thr_length_default 64
++
++ /** Thresholding length for Rx
++ * FIFOs in 32 bit DWORDs
++ */
++ uint32_t rx_thr_length;
++#define dwc_param_rx_thr_length_default 64
++} dwc_otg_core_params_t;
++
++#ifdef DEBUG
++struct dwc_otg_core_if;
++typedef struct hc_xfer_info
++{
++ struct dwc_otg_core_if *core_if;
++ dwc_hc_t *hc;
++} hc_xfer_info_t;
++#endif
++
++/**
++ * The <code>dwc_otg_core_if</code> structure contains information needed to manage
++ * the DWC_otg controller acting in either host or device mode. It
++ * represents the programming view of the controller as a whole.
++ */
++typedef struct dwc_otg_core_if
++{
++ /** Parameters that define how the core should be configured.*/
++ dwc_otg_core_params_t *core_params;
++
++ /** Core Global registers starting at offset 000h. */
++ dwc_otg_core_global_regs_t *core_global_regs;
++
++ /** Device-specific information */
++ dwc_otg_dev_if_t *dev_if;
++ /** Host-specific information */
++ dwc_otg_host_if_t *host_if;
++
++ /*
++ * Set to 1 if the core PHY interface bits in USBCFG have been
++ * initialized.
++ */
++ uint8_t phy_init_done;
++
++ /*
++ * SRP Success flag, set by srp success interrupt in FS I2C mode
++ */
++ uint8_t srp_success;
++ uint8_t srp_timer_started;
++
++ /* Common configuration information */
++ /** Power and Clock Gating Control Register */
++ volatile uint32_t *pcgcctl;
++#define DWC_OTG_PCGCCTL_OFFSET 0xE00
++
++ /** Push/pop addresses for endpoints or host channels.*/
++ uint32_t *data_fifo[MAX_EPS_CHANNELS];
++#define DWC_OTG_DATA_FIFO_OFFSET 0x1000
++#define DWC_OTG_DATA_FIFO_SIZE 0x1000
++
++ /** Total RAM for FIFOs (Bytes) */
++ uint16_t total_fifo_size;
++ /** Size of Rx FIFO (Bytes) */
++ uint16_t rx_fifo_size;
++ /** Size of Non-periodic Tx FIFO (Bytes) */
++ uint16_t nperio_tx_fifo_size;
++
++ /** 1 if DMA is enabled, 0 otherwise. */
++ uint8_t dma_enable;
++
++ /** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */
++ uint8_t en_multiple_tx_fifo;
++
++ /** Set to 1 if multiple packets of a high-bandwidth transfer is in
++ * process of being queued */
++ uint8_t queuing_high_bandwidth;
++
++ /** Hardware Configuration -- stored here for convenience.*/
++ hwcfg1_data_t hwcfg1;
++ hwcfg2_data_t hwcfg2;
++ hwcfg3_data_t hwcfg3;
++ hwcfg4_data_t hwcfg4;
++
++ /** The operational State, during transations
++ * (a_host>>a_peripherial and b_device=>b_host) this may not
++ * match the core but allows the software to determine
++ * transitions.
++ */
++ uint8_t op_state;
++
++ /**
++ * Set to 1 if the HCD needs to be restarted on a session request
++ * interrupt. This is required if no connector ID status change has
++ * occurred since the HCD was last disconnected.
++ */
++ uint8_t restart_hcd_on_session_req;
++
++ /** HCD callbacks */
++ /** A-Device is a_host */
++#define A_HOST (1)
++ /** A-Device is a_suspend */
++#define A_SUSPEND (2)
++ /** A-Device is a_peripherial */
++#define A_PERIPHERAL (3)
++ /** B-Device is operating as a Peripheral. */
++#define B_PERIPHERAL (4)
++ /** B-Device is operating as a Host. */
++#define B_HOST (5)
++
++ /** HCD callbacks */
++ struct dwc_otg_cil_callbacks *hcd_cb;
++ /** PCD callbacks */
++ struct dwc_otg_cil_callbacks *pcd_cb;
++
++ /** Device mode Periodic Tx FIFO Mask */
++ uint32_t p_tx_msk;
++ /** Device mode Periodic Tx FIFO Mask */
++ uint32_t tx_msk;
++
++#ifdef DEBUG
++ uint32_t start_hcchar_val[MAX_EPS_CHANNELS];
++
++ hc_xfer_info_t hc_xfer_info[MAX_EPS_CHANNELS];
++ struct timer_list hc_xfer_timer[MAX_EPS_CHANNELS];
++
++#if 1 // winder
++ uint32_t hfnum_7_samples;
++ uint32_t hfnum_7_frrem_accum;
++ uint32_t hfnum_0_samples;
++ uint32_t hfnum_0_frrem_accum;
++ uint32_t hfnum_other_samples;
++ uint32_t hfnum_other_frrem_accum;
++#else
++ uint32_t hfnum_7_samples;
++ uint64_t hfnum_7_frrem_accum;
++ uint32_t hfnum_0_samples;
++ uint64_t hfnum_0_frrem_accum;
++ uint32_t hfnum_other_samples;
++ uint64_t hfnum_other_frrem_accum;
++#endif
++ resource_size_t phys_addr; /* Added to support PLB DMA : phys-virt mapping */
++#endif
++
++} dwc_otg_core_if_t;
++
++/*
++ * The following functions support initialization of the CIL driver component
++ * and the DWC_otg controller.
++ */
++extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *_reg_base_addr,
++ dwc_otg_core_params_t *_core_params);
++extern void dwc_otg_cil_remove(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_core_init(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_core_host_init(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_core_dev_init(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_enable_global_interrupts( dwc_otg_core_if_t *_core_if );
++extern void dwc_otg_disable_global_interrupts( dwc_otg_core_if_t *_core_if );
++
++/** @name Device CIL Functions
++ * The following functions support managing the DWC_otg controller in device
++ * mode.
++ */
++/**@{*/
++extern void dwc_otg_wakeup(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_read_setup_packet (dwc_otg_core_if_t *_core_if, uint32_t *_dest);
++extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_ep0_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep, int _dma);
++extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
++extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *_core_if);
++/**@}*/
++
++/** @name Host CIL Functions
++ * The following functions support managing the DWC_otg controller in host
++ * mode.
++ */
++/**@{*/
++extern void dwc_otg_hc_init(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_hc_halt(dwc_otg_core_if_t *_core_if,
++ dwc_hc_t *_hc,
++ dwc_otg_halt_status_e _halt_status);
++extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
++extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *_core_if);
++extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *_core_if);
++
++/**
++ * This function Reads HPRT0 in preparation to modify. It keeps the
++ * WC bits 0 so that if they are read as 1, they won't clear when you
++ * write it back
++ */
++static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t *_core_if)
++{
++ hprt0_data_t hprt0;
++ hprt0.d32 = dwc_read_reg32(_core_if->host_if->hprt0);
++ hprt0.b.prtena = 0;
++ hprt0.b.prtconndet = 0;
++ hprt0.b.prtenchng = 0;
++ hprt0.b.prtovrcurrchng = 0;
++ return hprt0.d32;
++}
++
++extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t *_core_if);
++/**@}*/
++
++/** @name Common CIL Functions
++ * The following functions support managing the DWC_otg controller in either
++ * device or host mode.
++ */
++/**@{*/
++
++extern void dwc_otg_read_packet(dwc_otg_core_if_t *core_if,
++ uint8_t *dest,
++ uint16_t bytes);
++
++extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t *_core_if);
++
++extern void dwc_otg_flush_tx_fifo( dwc_otg_core_if_t *_core_if,
++ const int _num );
++extern void dwc_otg_flush_rx_fifo( dwc_otg_core_if_t *_core_if );
++extern void dwc_otg_core_reset( dwc_otg_core_if_t *_core_if );
++
++#define NP_TXFIFO_EMPTY -1
++#define MAX_NP_TXREQUEST_Q_SLOTS 8
++/**
++ * This function returns the endpoint number of the request at
++ * the top of non-periodic TX FIFO, or -1 if the request FIFO is
++ * empty.
++ */
++static inline int dwc_otg_top_nptxfifo_epnum(dwc_otg_core_if_t *_core_if) {
++ gnptxsts_data_t txstatus = {.d32 = 0};
++
++ txstatus.d32 = dwc_read_reg32(&_core_if->core_global_regs->gnptxsts);
++ return (txstatus.b.nptxqspcavail == MAX_NP_TXREQUEST_Q_SLOTS ?
++ -1 : txstatus.b.nptxqtop_chnep);
++}
++/**
++ * This function returns the Core Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t *_core_if) {
++ return (dwc_read_reg32(&_core_if->core_global_regs->gintsts) &
++ dwc_read_reg32(&_core_if->core_global_regs->gintmsk));
++}
++
++/**
++ * This function returns the OTG Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_otg_intr (dwc_otg_core_if_t *_core_if) {
++ return (dwc_read_reg32 (&_core_if->core_global_regs->gotgint));
++}
++
++/**
++ * This function reads the Device All Endpoints Interrupt register and
++ * returns the IN endpoint interrupt bits.
++ */
++static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t *_core_if) {
++ uint32_t v;
++ v = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daint) &
++ dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk);
++ return (v & 0xffff);
++
++}
++
++/**
++ * This function reads the Device All Endpoints Interrupt register and
++ * returns the OUT endpoint interrupt bits.
++ */
++static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t *_core_if) {
++ uint32_t v;
++ v = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daint) &
++ dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk);
++ return ((v & 0xffff0000) >> 16);
++}
++
++/**
++ * This function returns the Device IN EP Interrupt register
++ */
++static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t *_core_if,
++ dwc_ep_t *_ep)
++{
++ dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++ uint32_t v, msk, emp;
++ msk = dwc_read_reg32(&dev_if->dev_global_regs->diepmsk);
++ emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
++ msk |= ((emp >> _ep->num) & 0x1) << 7;
++ v = dwc_read_reg32(&dev_if->in_ep_regs[_ep->num]->diepint) & msk;
++/*
++ dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++ uint32_t v;
++ v = dwc_read_reg32(&dev_if->in_ep_regs[_ep->num]->diepint) &
++ dwc_read_reg32(&dev_if->dev_global_regs->diepmsk);
++*/
++ return v;
++}
++/**
++ * This function returns the Device OUT EP Interrupt register
++ */
++static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t *_core_if,
++ dwc_ep_t *_ep)
++{
++ dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++ uint32_t v;
++ v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) &
++ dwc_read_reg32(&dev_if->dev_global_regs->doepmsk);
++ return v;
++}
++
++/**
++ * This function returns the Host All Channel Interrupt register
++ */
++static inline uint32_t dwc_otg_read_host_all_channels_intr (dwc_otg_core_if_t *_core_if)
++{
++ return (dwc_read_reg32 (&_core_if->host_if->host_global_regs->haint));
++}
++
++static inline uint32_t dwc_otg_read_host_channel_intr (dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
++{
++ return (dwc_read_reg32 (&_core_if->host_if->hc_regs[_hc->hc_num]->hcint));
++}
++
++
++/**
++ * This function returns the mode of the operation, host or device.
++ *
++ * @return 0 - Device Mode, 1 - Host Mode
++ */
++static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t *_core_if) {
++ return (dwc_read_reg32( &_core_if->core_global_regs->gintsts ) & 0x1);
++}
++
++static inline uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t *_core_if)
++{
++ return (dwc_otg_mode(_core_if) != DWC_HOST_MODE);
++}
++static inline uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t *_core_if)
++{
++ return (dwc_otg_mode(_core_if) == DWC_HOST_MODE);
++}
++
++extern int32_t dwc_otg_handle_common_intr( dwc_otg_core_if_t *_core_if );
++
++
++/**@}*/
++
++/**
++ * DWC_otg CIL callback structure. This structure allows the HCD and
++ * PCD to register functions used for starting and stopping the PCD
++ * and HCD for role change on for a DRD.
++ */
++typedef struct dwc_otg_cil_callbacks
++{
++ /** Start function for role change */
++ int (*start) (void *_p);
++ /** Stop Function for role change */
++ int (*stop) (void *_p);
++ /** Disconnect Function for role change */
++ int (*disconnect) (void *_p);
++ /** Resume/Remote wakeup Function */
++ int (*resume_wakeup) (void *_p);
++ /** Suspend function */
++ int (*suspend) (void *_p);
++ /** Session Start (SRP) */
++ int (*session_start) (void *_p);
++ /** Pointer passed to start() and stop() */
++ void *p;
++} dwc_otg_cil_callbacks_t;
++
++
++
++extern void dwc_otg_cil_register_pcd_callbacks( dwc_otg_core_if_t *_core_if,
++ dwc_otg_cil_callbacks_t *_cb,
++ void *_p);
++extern void dwc_otg_cil_register_hcd_callbacks( dwc_otg_core_if_t *_core_if,
++ dwc_otg_cil_callbacks_t *_cb,
++ void *_p);
++
++
++#endif
+diff --git a/drivers/usb/dwc_otg/dwc_otg_cil_ifx.h b/drivers/usb/dwc_otg/dwc_otg_cil_ifx.h
+new file mode 100644
+index 0000000..b0298ec
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_cil_ifx.h
+@@ -0,0 +1,58 @@
++/******************************************************************************
++**
++** FILE NAME : dwc_otg_cil_ifx.h
++** PROJECT : Twinpass/Danube
++** MODULES : DWC OTG USB
++**
++** DATE : 07 Sep. 2007
++** AUTHOR : Sung Winder
++** DESCRIPTION : Default param value.
++** COPYRIGHT : Copyright (c) 2007
++** Infineon Technologies AG
++** 2F, No.2, Li-Hsin Rd., Hsinchu Science Park,
++** Hsin-chu City, 300 Taiwan.
++**
++** This program is free software; you can redistribute it and/or modify
++** it under the terms of the GNU General Public License as published by
++** the Free Software Foundation; either version 2 of the License, or
++** (at your option) any later version.
++**
++** HISTORY
++** $Date $Author $Comment
++** 12 April 2007 Sung Winder Initiate Version
++*******************************************************************************/
++#if !defined(__DWC_OTG_CIL_IFX_H__)
++#define __DWC_OTG_CIL_IFX_H__
++
++/* ================ Default param value ================== */
++#define dwc_param_opt_default 1
++#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE
++#define dwc_param_dma_enable_default 1
++#define dwc_param_dma_burst_size_default 32
++#define dwc_param_speed_default DWC_SPEED_PARAM_HIGH
++#define dwc_param_host_support_fs_ls_low_power_default 0
++#define dwc_param_host_ls_low_power_phy_clk_default DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ
++#define dwc_param_enable_dynamic_fifo_default 1
++#define dwc_param_data_fifo_size_default 2048
++#define dwc_param_dev_rx_fifo_size_default 1024
++#define dwc_param_dev_nperio_tx_fifo_size_default 1024
++#define dwc_param_dev_perio_tx_fifo_size_default 768
++#define dwc_param_host_rx_fifo_size_default 640
++#define dwc_param_host_nperio_tx_fifo_size_default 640
++#define dwc_param_host_perio_tx_fifo_size_default 768
++#define dwc_param_max_transfer_size_default 65535
++#define dwc_param_max_packet_count_default 511
++#define dwc_param_host_channels_default 16
++#define dwc_param_dev_endpoints_default 6
++#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI
++#define dwc_param_phy_utmi_width_default 16
++#define dwc_param_phy_ulpi_ddr_default 0
++#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS
++#define dwc_param_i2c_enable_default 0
++#define dwc_param_ulpi_fs_ls_default 0
++#define dwc_param_ts_dline_default 0
++
++/* ======================================================= */
++
++#endif // __DWC_OTG_CIL_IFX_H__
++
+diff --git a/drivers/usb/dwc_otg/dwc_otg_cil_intr.c b/drivers/usb/dwc_otg/dwc_otg_cil_intr.c
+new file mode 100644
+index 0000000..d469ab4
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_cil_intr.c
+@@ -0,0 +1,708 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_cil_intr.c $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 553126 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ *
++ * The Core Interface Layer provides basic services for accessing and
++ * managing the DWC_otg hardware. These services are used by both the
++ * Host Controller Driver and the Peripheral Controller Driver.
++ *
++ * This file contains the Common Interrupt handlers.
++ */
++#include "dwc_otg_plat.h"
++#include "dwc_otg_regs.h"
++#include "dwc_otg_cil.h"
++
++#ifdef DEBUG
++inline const char *op_state_str( dwc_otg_core_if_t *_core_if )
++{
++ return (_core_if->op_state==A_HOST?"a_host":
++ (_core_if->op_state==A_SUSPEND?"a_suspend":
++ (_core_if->op_state==A_PERIPHERAL?"a_peripheral":
++ (_core_if->op_state==B_PERIPHERAL?"b_peripheral":
++ (_core_if->op_state==B_HOST?"b_host":
++ "unknown")))));
++}
++#endif
++
++/** This function will log a debug message
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_mode_mismatch_intr (dwc_otg_core_if_t *_core_if)
++{
++ gintsts_data_t gintsts;
++ DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n",
++ dwc_otg_mode(_core_if) ? "Host" : "Device");
++
++ /* Clear interrupt */
++ gintsts.d32 = 0;
++ gintsts.b.modemismatch = 1;
++ dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
++ return 1;
++}
++
++/** Start the HCD. Helper function for using the HCD callbacks.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++static inline void hcd_start( dwc_otg_core_if_t *_core_if )
++{
++ if (_core_if->hcd_cb && _core_if->hcd_cb->start) {
++ _core_if->hcd_cb->start( _core_if->hcd_cb->p );
++ }
++}
++/** Stop the HCD. Helper function for using the HCD callbacks.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++static inline void hcd_stop( dwc_otg_core_if_t *_core_if )
++{
++ if (_core_if->hcd_cb && _core_if->hcd_cb->stop) {
++ _core_if->hcd_cb->stop( _core_if->hcd_cb->p );
++ }
++}
++/** Disconnect the HCD. Helper function for using the HCD callbacks.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++static inline void hcd_disconnect( dwc_otg_core_if_t *_core_if )
++{
++ if (_core_if->hcd_cb && _core_if->hcd_cb->disconnect) {
++ _core_if->hcd_cb->disconnect( _core_if->hcd_cb->p );
++ }
++}
++/** Inform the HCD the a New Session has begun. Helper function for
++ * using the HCD callbacks.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++static inline void hcd_session_start( dwc_otg_core_if_t *_core_if )
++{
++ if (_core_if->hcd_cb && _core_if->hcd_cb->session_start) {
++ _core_if->hcd_cb->session_start( _core_if->hcd_cb->p );
++ }
++}
++
++/** Start the PCD. Helper function for using the PCD callbacks.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++static inline void pcd_start( dwc_otg_core_if_t *_core_if )
++{
++ if (_core_if->pcd_cb && _core_if->pcd_cb->start ) {
++ _core_if->pcd_cb->start( _core_if->pcd_cb->p );
++ }
++}
++/** Stop the PCD. Helper function for using the PCD callbacks.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++static inline void pcd_stop( dwc_otg_core_if_t *_core_if )
++{
++ if (_core_if->pcd_cb && _core_if->pcd_cb->stop ) {
++ _core_if->pcd_cb->stop( _core_if->pcd_cb->p );
++ }
++}
++/** Suspend the PCD. Helper function for using the PCD callbacks.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++static inline void pcd_suspend( dwc_otg_core_if_t *_core_if )
++{
++ if (_core_if->pcd_cb && _core_if->pcd_cb->suspend ) {
++ _core_if->pcd_cb->suspend( _core_if->pcd_cb->p );
++ }
++}
++/** Resume the PCD. Helper function for using the PCD callbacks.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++static inline void pcd_resume( dwc_otg_core_if_t *_core_if )
++{
++ if (_core_if->pcd_cb && _core_if->pcd_cb->resume_wakeup ) {
++ _core_if->pcd_cb->resume_wakeup( _core_if->pcd_cb->p );
++ }
++}
++
++/**
++ * This function handles the OTG Interrupts. It reads the OTG
++ * Interrupt Register (GOTGINT) to determine what interrupt has
++ * occurred.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t *_core_if)
++{
++ dwc_otg_core_global_regs_t *global_regs =
++ _core_if->core_global_regs;
++ gotgint_data_t gotgint;
++ gotgctl_data_t gotgctl;
++ gintmsk_data_t gintmsk;
++
++ gotgint.d32 = dwc_read_reg32( &global_regs->gotgint);
++ gotgctl.d32 = dwc_read_reg32( &global_regs->gotgctl);
++ DWC_DEBUGPL(DBG_CIL, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint.d32,
++ op_state_str(_core_if));
++ //DWC_DEBUGPL(DBG_CIL, "gotgctl=%08x\n", gotgctl.d32 );
++
++ if (gotgint.b.sesenddet) {
++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++ "Session End Detected++ (%s)\n",
++ op_state_str(_core_if));
++ gotgctl.d32 = dwc_read_reg32( &global_regs->gotgctl);
++
++ if (_core_if->op_state == B_HOST) {
++ pcd_start( _core_if );
++ _core_if->op_state = B_PERIPHERAL;
++ } else {
++ /* If not B_HOST and Device HNP still set. HNP
++ * Did not succeed!*/
++ if (gotgctl.b.devhnpen) {
++ DWC_DEBUGPL(DBG_ANY, "Session End Detected\n");
++ DWC_ERROR( "Device Not Connected/Responding!\n" );
++ }
++
++ /* If Session End Detected the B-Cable has
++ * been disconnected. */
++ /* Reset PCD and Gadget driver to a
++ * clean state. */
++ pcd_stop(_core_if);
++ }
++ gotgctl.d32 = 0;
++ gotgctl.b.devhnpen = 1;
++ dwc_modify_reg32( &global_regs->gotgctl,
++ gotgctl.d32, 0);
++ }
++ if (gotgint.b.sesreqsucstschng) {
++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++ "Session Reqeust Success Status Change++\n");
++ gotgctl.d32 = dwc_read_reg32( &global_regs->gotgctl);
++ if (gotgctl.b.sesreqscs) {
++ if ((_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) &&
++ (_core_if->core_params->i2c_enable)) {
++ _core_if->srp_success = 1;
++ }
++ else {
++ pcd_resume( _core_if );
++ /* Clear Session Request */
++ gotgctl.d32 = 0;
++ gotgctl.b.sesreq = 1;
++ dwc_modify_reg32( &global_regs->gotgctl,
++ gotgctl.d32, 0);
++ }
++ }
++ }
++ if (gotgint.b.hstnegsucstschng) {
++ /* Print statements during the HNP interrupt handling
++ * can cause it to fail.*/
++ gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
++ if (gotgctl.b.hstnegscs) {
++ if (dwc_otg_is_host_mode(_core_if) ) {
++ _core_if->op_state = B_HOST;
++ /*
++ * Need to disable SOF interrupt immediately.
++ * When switching from device to host, the PCD
++ * interrupt handler won't handle the
++ * interrupt if host mode is already set. The
++ * HCD interrupt handler won't get called if
++ * the HCD state is HALT. This means that the
++ * interrupt does not get handled and Linux
++ * complains loudly.
++ */
++ gintmsk.d32 = 0;
++ gintmsk.b.sofintr = 1;
++ dwc_modify_reg32(&global_regs->gintmsk,
++ gintmsk.d32, 0);
++ pcd_stop(_core_if);
++ /*
++ * Initialize the Core for Host mode.
++ */
++ hcd_start( _core_if );
++ _core_if->op_state = B_HOST;
++ }
++ } else {
++ gotgctl.d32 = 0;
++ gotgctl.b.hnpreq = 1;
++ gotgctl.b.devhnpen = 1;
++ dwc_modify_reg32( &global_regs->gotgctl,
++ gotgctl.d32, 0);
++ DWC_DEBUGPL( DBG_ANY, "HNP Failed\n");
++ DWC_ERROR( "Device Not Connected/Responding\n" );
++ }
++ }
++ if (gotgint.b.hstnegdet) {
++ /* The disconnect interrupt is set at the same time as
++ * Host Negotiation Detected. During the mode
++ * switch all interrupts are cleared so the disconnect
++ * interrupt handler will not get executed.
++ */
++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++ "Host Negotiation Detected++ (%s)\n",
++ (dwc_otg_is_host_mode(_core_if)?"Host":"Device"));
++ if (dwc_otg_is_device_mode(_core_if)){
++ DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n",_core_if->op_state);
++ hcd_disconnect( _core_if );
++ pcd_start( _core_if );
++ _core_if->op_state = A_PERIPHERAL;
++ } else {
++ /*
++ * Need to disable SOF interrupt immediately. When
++ * switching from device to host, the PCD interrupt
++ * handler won't handle the interrupt if host mode is
++ * already set. The HCD interrupt handler won't get
++ * called if the HCD state is HALT. This means that
++ * the interrupt does not get handled and Linux
++ * complains loudly.
++ */
++ gintmsk.d32 = 0;
++ gintmsk.b.sofintr = 1;
++ dwc_modify_reg32(&global_regs->gintmsk,
++ gintmsk.d32, 0);
++ pcd_stop( _core_if );
++ hcd_start( _core_if );
++ _core_if->op_state = A_HOST;
++ }
++ }
++ if (gotgint.b.adevtoutchng) {
++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++ "A-Device Timeout Change++\n");
++ }
++ if (gotgint.b.debdone) {
++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++ "Debounce Done++\n");
++ }
++
++ /* Clear GOTGINT */
++ dwc_write_reg32 (&_core_if->core_global_regs->gotgint, gotgint.d32);
++
++ return 1;
++}
++
++/**
++ * This function handles the Connector ID Status Change Interrupt. It
++ * reads the OTG Interrupt Register (GOTCTL) to determine whether this
++ * is a Device to Host Mode transition or a Host Mode to Device
++ * Transition.
++ *
++ * This only occurs when the cable is connected/removed from the PHY
++ * connector.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t *_core_if)
++{
++ uint32_t count = 0;
++
++ gintsts_data_t gintsts = { .d32 = 0 };
++ gintmsk_data_t gintmsk = { .d32 = 0 };
++ gotgctl_data_t gotgctl = { .d32 = 0 };
++
++ /*
++ * Need to disable SOF interrupt immediately. If switching from device
++ * to host, the PCD interrupt handler won't handle the interrupt if
++ * host mode is already set. The HCD interrupt handler won't get
++ * called if the HCD state is HALT. This means that the interrupt does
++ * not get handled and Linux complains loudly.
++ */
++ gintmsk.b.sofintr = 1;
++ dwc_modify_reg32(&_core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
++
++ DWC_DEBUGPL(DBG_CIL, " ++Connector ID Status Change Interrupt++ (%s)\n",
++ (dwc_otg_is_host_mode(_core_if)?"Host":"Device"));
++ gotgctl.d32 = dwc_read_reg32(&_core_if->core_global_regs->gotgctl);
++ DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32);
++ DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts);
++
++ /* B-Device connector (Device Mode) */
++ if (gotgctl.b.conidsts) {
++ /* Wait for switch to device mode. */
++ while (!dwc_otg_is_device_mode(_core_if) ){
++ DWC_PRINT("Waiting for Peripheral Mode, Mode=%s\n",
++ (dwc_otg_is_host_mode(_core_if)?"Host":"Peripheral"));
++ MDELAY(100);
++ if (++count > 10000) *(uint32_t*)NULL=0;
++ }
++ _core_if->op_state = B_PERIPHERAL;
++ dwc_otg_core_init(_core_if);
++ dwc_otg_enable_global_interrupts(_core_if);
++ pcd_start( _core_if );
++ } else {
++ /* A-Device connector (Host Mode) */
++ while (!dwc_otg_is_host_mode(_core_if) ) {
++ DWC_PRINT("Waiting for Host Mode, Mode=%s\n",
++ (dwc_otg_is_host_mode(_core_if)?"Host":"Peripheral"));
++ MDELAY(100);
++ if (++count > 10000) *(uint32_t*)NULL=0;
++ }
++ _core_if->op_state = A_HOST;
++ /*
++ * Initialize the Core for Host mode.
++ */
++ dwc_otg_core_init(_core_if);
++ dwc_otg_enable_global_interrupts(_core_if);
++ hcd_start( _core_if );
++ }
++
++ /* Set flag and clear interrupt */
++ gintsts.b.conidstschng = 1;
++ dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
++
++ return 1;
++}
++
++/**
++ * This interrupt indicates that a device is initiating the Session
++ * Request Protocol to request the host to turn on bus power so a new
++ * session can begin. The handler responds by turning on bus power. If
++ * the DWC_otg controller is in low power mode, the handler brings the
++ * controller out of low power mode before turning on bus power.
++ *
++ * @param _core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_session_req_intr( dwc_otg_core_if_t *_core_if )
++{
++#ifndef DWC_HOST_ONLY // winder
++ hprt0_data_t hprt0;
++#endif
++ gintsts_data_t gintsts;
++
++#ifndef DWC_HOST_ONLY
++ DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n");
++
++ if (dwc_otg_is_device_mode(_core_if) ) {
++ DWC_PRINT("SRP: Device mode\n");
++ } else {
++ DWC_PRINT("SRP: Host mode\n");
++
++ /* Turn on the port power bit. */
++ hprt0.d32 = dwc_otg_read_hprt0( _core_if );
++ hprt0.b.prtpwr = 1;
++ dwc_write_reg32(_core_if->host_if->hprt0, hprt0.d32);
++
++ /* Start the Connection timer. So a message can be displayed
++ * if connect does not occur within 10 seconds. */
++ hcd_session_start( _core_if );
++ }
++#endif
++
++ /* Clear interrupt */
++ gintsts.d32 = 0;
++ gintsts.b.sessreqintr = 1;
++ dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
++
++ return 1;
++}
++
++/**
++ * This interrupt indicates that the DWC_otg controller has detected a
++ * resume or remote wakeup sequence. If the DWC_otg controller is in
++ * low power mode, the handler must brings the controller out of low
++ * power mode. The controller automatically begins resume
++ * signaling. The handler schedules a time to stop resume signaling.
++ */
++int32_t dwc_otg_handle_wakeup_detected_intr( dwc_otg_core_if_t *_core_if )
++{
++ gintsts_data_t gintsts;
++
++ DWC_DEBUGPL(DBG_ANY, "++Resume and Remote Wakeup Detected Interrupt++\n");
++
++ if (dwc_otg_is_device_mode(_core_if) ) {
++ dctl_data_t dctl = {.d32=0};
++ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n",
++ dwc_read_reg32( &_core_if->dev_if->dev_global_regs->dsts));
++#ifdef PARTIAL_POWER_DOWN
++ if (_core_if->hwcfg4.b.power_optimiz) {
++ pcgcctl_data_t power = {.d32=0};
++
++ power.d32 = dwc_read_reg32( _core_if->pcgcctl );
++ DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n", power.d32);
++
++ power.b.stoppclk = 0;
++ dwc_write_reg32( _core_if->pcgcctl, power.d32);
++
++ power.b.pwrclmp = 0;
++ dwc_write_reg32( _core_if->pcgcctl, power.d32);
++
++ power.b.rstpdwnmodule = 0;
++ dwc_write_reg32( _core_if->pcgcctl, power.d32);
++ }
++#endif
++ /* Clear the Remote Wakeup Signalling */
++ dctl.b.rmtwkupsig = 1;
++ dwc_modify_reg32( &_core_if->dev_if->dev_global_regs->dctl,
++ dctl.d32, 0 );
++
++ if (_core_if->pcd_cb && _core_if->pcd_cb->resume_wakeup) {
++ _core_if->pcd_cb->resume_wakeup( _core_if->pcd_cb->p );
++ }
++
++ } else {
++ /*
++ * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
++ * so that OPT tests pass with all PHYs).
++ */
++ hprt0_data_t hprt0 = {.d32=0};
++ pcgcctl_data_t pcgcctl = {.d32=0};
++ /* Restart the Phy Clock */
++ pcgcctl.b.stoppclk = 1;
++ dwc_modify_reg32(_core_if->pcgcctl, pcgcctl.d32, 0);
++ UDELAY(10);
++
++ /* Now wait for 70 ms. */
++ hprt0.d32 = dwc_otg_read_hprt0( _core_if );
++ DWC_DEBUGPL(DBG_ANY,"Resume: HPRT0=%0x\n", hprt0.d32);
++ MDELAY(70);
++ hprt0.b.prtres = 0; /* Resume */
++ dwc_write_reg32(_core_if->host_if->hprt0, hprt0.d32);
++ DWC_DEBUGPL(DBG_ANY,"Clear Resume: HPRT0=%0x\n", dwc_read_reg32(_core_if->host_if->hprt0));
++ }
++
++ /* Clear interrupt */
++ gintsts.d32 = 0;
++ gintsts.b.wkupintr = 1;
++ dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
++
++ return 1;
++}
++
++/**
++ * This interrupt indicates that a device has been disconnected from
++ * the root port.
++ */
++int32_t dwc_otg_handle_disconnect_intr( dwc_otg_core_if_t *_core_if)
++{
++ gintsts_data_t gintsts;
++
++ DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n",
++ (dwc_otg_is_host_mode(_core_if)?"Host":"Device"),
++ op_state_str(_core_if));
++
++/** @todo Consolidate this if statement. */
++#ifndef DWC_HOST_ONLY
++ if (_core_if->op_state == B_HOST) {
++ /* If in device mode Disconnect and stop the HCD, then
++ * start the PCD. */
++ hcd_disconnect( _core_if );
++ pcd_start( _core_if );
++ _core_if->op_state = B_PERIPHERAL;
++ } else if (dwc_otg_is_device_mode(_core_if)) {
++ gotgctl_data_t gotgctl = { .d32 = 0 };
++ gotgctl.d32 = dwc_read_reg32(&_core_if->core_global_regs->gotgctl);
++ if (gotgctl.b.hstsethnpen==1) {
++ /* Do nothing, if HNP in process the OTG
++ * interrupt "Host Negotiation Detected"
++ * interrupt will do the mode switch.
++ */
++ } else if (gotgctl.b.devhnpen == 0) {
++ /* If in device mode Disconnect and stop the HCD, then
++ * start the PCD. */
++ hcd_disconnect( _core_if );
++ pcd_start( _core_if );
++ _core_if->op_state = B_PERIPHERAL;
++ } else {
++ DWC_DEBUGPL(DBG_ANY,"!a_peripheral && !devhnpen\n");
++ }
++ } else {
++ if (_core_if->op_state == A_HOST) {
++ /* A-Cable still connected but device disconnected. */
++ hcd_disconnect( _core_if );
++ }
++ }
++#endif
++/* Without OTG, we should use the disconnect function!? winder added.*/
++#if 1 // NO OTG, so host only!!
++ hcd_disconnect( _core_if );
++#endif
++
++ gintsts.d32 = 0;
++ gintsts.b.disconnect = 1;
++ dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
++ return 1;
++}
++/**
++ * This interrupt indicates that SUSPEND state has been detected on
++ * the USB.
++ *
++ * For HNP the USB Suspend interrupt signals the change from
++ * "a_peripheral" to "a_host".
++ *
++ * When power management is enabled the core will be put in low power
++ * mode.
++ */
++int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t *_core_if )
++{
++ dsts_data_t dsts;
++ gintsts_data_t gintsts;
++
++ //805141:<IFTW-fchang>.removed DWC_DEBUGPL(DBG_ANY,"USB SUSPEND\n");
++
++ if (dwc_otg_is_device_mode( _core_if ) ) {
++ /* Check the Device status register to determine if the Suspend
++ * state is active. */
++ dsts.d32 = dwc_read_reg32( &_core_if->dev_if->dev_global_regs->dsts);
++ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32);
++ DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d "
++ "HWCFG4.power Optimize=%d\n",
++ dsts.b.suspsts, _core_if->hwcfg4.b.power_optimiz);
++
++
++#ifdef PARTIAL_POWER_DOWN
++/** @todo Add a module parameter for power management. */
++
++ if (dsts.b.suspsts && _core_if->hwcfg4.b.power_optimiz) {
++ pcgcctl_data_t power = {.d32=0};
++ DWC_DEBUGPL(DBG_CIL, "suspend\n");
++
++ power.b.pwrclmp = 1;
++ dwc_write_reg32( _core_if->pcgcctl, power.d32);
++
++ power.b.rstpdwnmodule = 1;
++ dwc_modify_reg32( _core_if->pcgcctl, 0, power.d32);
++
++ power.b.stoppclk = 1;
++ dwc_modify_reg32( _core_if->pcgcctl, 0, power.d32);
++
++ } else {
++ DWC_DEBUGPL(DBG_ANY,"disconnect?\n");
++ }
++#endif
++ /* PCD callback for suspend. */
++ pcd_suspend(_core_if);
++ } else {
++ if (_core_if->op_state == A_PERIPHERAL) {
++ DWC_DEBUGPL(DBG_ANY,"a_peripheral->a_host\n");
++ /* Clear the a_peripheral flag, back to a_host. */
++ pcd_stop( _core_if );
++ hcd_start( _core_if );
++ _core_if->op_state = A_HOST;
++ }
++ }
++
++ /* Clear interrupt */
++ gintsts.d32 = 0;
++ gintsts.b.usbsuspend = 1;
++ dwc_write_reg32( &_core_if->core_global_regs->gintsts, gintsts.d32);
++
++ return 1;
++}
++
++
++/**
++ * This function returns the Core Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t *_core_if)
++{
++ gintsts_data_t gintsts;
++ gintmsk_data_t gintmsk;
++ gintmsk_data_t gintmsk_common = {.d32=0};
++ gintmsk_common.b.wkupintr = 1;
++ gintmsk_common.b.sessreqintr = 1;
++ gintmsk_common.b.conidstschng = 1;
++ gintmsk_common.b.otgintr = 1;
++ gintmsk_common.b.modemismatch = 1;
++ gintmsk_common.b.disconnect = 1;
++ gintmsk_common.b.usbsuspend = 1;
++ /** @todo: The port interrupt occurs while in device
++ * mode. Added code to CIL to clear the interrupt for now!
++ */
++ gintmsk_common.b.portintr = 1;
++
++ gintsts.d32 = dwc_read_reg32(&_core_if->core_global_regs->gintsts);
++ gintmsk.d32 = dwc_read_reg32(&_core_if->core_global_regs->gintmsk);
++#ifdef DEBUG
++ /* if any common interrupts set */
++ if (gintsts.d32 & gintmsk_common.d32) {
++ DWC_DEBUGPL(DBG_ANY, "gintsts=%08x gintmsk=%08x\n",
++ gintsts.d32, gintmsk.d32);
++ }
++#endif
++
++ return ((gintsts.d32 & gintmsk.d32 ) & gintmsk_common.d32);
++
++}
++
++/**
++ * Common interrupt handler.
++ *
++ * The common interrupts are those that occur in both Host and Device mode.
++ * This handler handles the following interrupts:
++ * - Mode Mismatch Interrupt
++ * - Disconnect Interrupt
++ * - OTG Interrupt
++ * - Connector ID Status Change Interrupt
++ * - Session Request Interrupt.
++ * - Resume / Remote Wakeup Detected Interrupt.
++ *
++ */
++extern int32_t dwc_otg_handle_common_intr( dwc_otg_core_if_t *_core_if )
++{
++ int retval = 0;
++ gintsts_data_t gintsts;
++
++ gintsts.d32 = dwc_otg_read_common_intr(_core_if);
++
++ if (gintsts.b.modemismatch) {
++ retval |= dwc_otg_handle_mode_mismatch_intr( _core_if );
++ }
++ if (gintsts.b.otgintr) {
++ retval |= dwc_otg_handle_otg_intr( _core_if );
++ }
++ if (gintsts.b.conidstschng) {
++ retval |= dwc_otg_handle_conn_id_status_change_intr( _core_if );
++ }
++ if (gintsts.b.disconnect) {
++ retval |= dwc_otg_handle_disconnect_intr( _core_if );
++ }
++ if (gintsts.b.sessreqintr) {
++ retval |= dwc_otg_handle_session_req_intr( _core_if );
++ }
++ if (gintsts.b.wkupintr) {
++ retval |= dwc_otg_handle_wakeup_detected_intr( _core_if );
++ }
++ if (gintsts.b.usbsuspend) {
++ retval |= dwc_otg_handle_usb_suspend_intr( _core_if );
++ }
++ if (gintsts.b.portintr && dwc_otg_is_device_mode(_core_if)) {
++ /* The port interrupt occurs while in device mode with HPRT0
++ * Port Enable/Disable.
++ */
++ gintsts.d32 = 0;
++ gintsts.b.portintr = 1;
++ dwc_write_reg32(&_core_if->core_global_regs->gintsts,
++ gintsts.d32);
++ retval |= 1;
++
++ }
++ return retval;
++}
+diff --git a/drivers/usb/dwc_otg/dwc_otg_driver.c b/drivers/usb/dwc_otg/dwc_otg_driver.c
+new file mode 100644
+index 0000000..1b0daab
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_driver.c
+@@ -0,0 +1,1274 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_driver.c $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 631780 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ * The dwc_otg_driver module provides the initialization and cleanup entry
++ * points for the DWC_otg driver. This module will be dynamically installed
++ * after Linux is booted using the insmod command. When the module is
++ * installed, the dwc_otg_init function is called. When the module is
++ * removed (using rmmod), the dwc_otg_cleanup function is called.
++ *
++ * This module also defines a data structure for the dwc_otg_driver, which is
++ * used in conjunction with the standard ARM lm_device structure. These
++ * structures allow the OTG driver to comply with the standard Linux driver
++ * model in which devices and drivers are registered with a bus driver. This
++ * has the benefit that Linux can expose attributes of the driver and device
++ * in its special sysfs file system. Users can then read or write files in
++ * this file system to perform diagnostics on the driver components or the
++ * device.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/gpio.h>
++
++#include <linux/device.h>
++#include <linux/platform_device.h>
++
++#include <linux/errno.h>
++#include <linux/types.h>
++#include <linux/stat.h> /* permission constants */
++#include <linux/irq.h>
++#include <asm/io.h>
++
++#include "dwc_otg_plat.h"
++#include "dwc_otg_attr.h"
++#include "dwc_otg_driver.h"
++#include "dwc_otg_cil.h"
++#include "dwc_otg_cil_ifx.h"
++
++// #include "dwc_otg_pcd.h" // device
++#include "dwc_otg_hcd.h" // host
++
++#include "dwc_otg_ifx.h" // for Infineon platform specific.
++
++#define DWC_DRIVER_VERSION "2.60a 22-NOV-2006"
++#define DWC_DRIVER_DESC "HS OTG USB Controller driver"
++
++const char dwc_driver_name[] = "dwc_otg";
++
++static unsigned long dwc_iomem_base = IFX_USB_IOMEM_BASE;
++int dwc_irq = LTQ_USB_INT;
++//int dwc_irq = 54;
++//int dwc_irq = IFXMIPS_USB_OC_INT;
++
++extern int ifx_usb_hc_init(unsigned long base_addr, int irq);
++extern void ifx_usb_hc_remove(void);
++
++/*-------------------------------------------------------------------------*/
++/* Encapsulate the module parameter settings */
++
++static dwc_otg_core_params_t dwc_otg_module_params = {
++ .opt = -1,
++ .otg_cap = -1,
++ .dma_enable = -1,
++ .dma_burst_size = -1,
++ .speed = -1,
++ .host_support_fs_ls_low_power = -1,
++ .host_ls_low_power_phy_clk = -1,
++ .enable_dynamic_fifo = -1,
++ .data_fifo_size = -1,
++ .dev_rx_fifo_size = -1,
++ .dev_nperio_tx_fifo_size = -1,
++ .dev_perio_tx_fifo_size = /* dev_perio_tx_fifo_size_1 */ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 15 */
++ .host_rx_fifo_size = -1,
++ .host_nperio_tx_fifo_size = -1,
++ .host_perio_tx_fifo_size = -1,
++ .max_transfer_size = -1,
++ .max_packet_count = -1,
++ .host_channels = -1,
++ .dev_endpoints = -1,
++ .phy_type = -1,
++ .phy_utmi_width = -1,
++ .phy_ulpi_ddr = -1,
++ .phy_ulpi_ext_vbus = -1,
++ .i2c_enable = -1,
++ .ulpi_fs_ls = -1,
++ .ts_dline = -1,
++ .en_multiple_tx_fifo = -1,
++ .dev_tx_fifo_size = { /* dev_tx_fifo_size */
++ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
++ }, /* 15 */
++ .thr_ctl = -1,
++ .tx_thr_length = -1,
++ .rx_thr_length = -1,
++};
++
++/**
++ * This function shows the Driver Version.
++ */
++static ssize_t version_show(struct device_driver *dev, char *buf)
++{
++ return snprintf(buf, sizeof(DWC_DRIVER_VERSION)+2,"%s\n",
++ DWC_DRIVER_VERSION);
++}
++static DRIVER_ATTR(version, S_IRUGO, version_show, NULL);
++
++/**
++ * Global Debug Level Mask.
++ */
++uint32_t g_dbg_lvl = 0xff; /* OFF */
++
++/**
++ * This function shows the driver Debug Level.
++ */
++static ssize_t dbg_level_show(struct device_driver *_drv, char *_buf)
++{
++ return sprintf(_buf, "0x%0x\n", g_dbg_lvl);
++}
++/**
++ * This function stores the driver Debug Level.
++ */
++static ssize_t dbg_level_store(struct device_driver *_drv, const char *_buf,
++ size_t _count)
++{
++ g_dbg_lvl = simple_strtoul(_buf, NULL, 16);
++ return _count;
++}
++static DRIVER_ATTR(debuglevel, S_IRUGO|S_IWUSR, dbg_level_show, dbg_level_store);
++
++/**
++ * This function is called during module intialization to verify that
++ * the module parameters are in a valid state.
++ */
++static int check_parameters(dwc_otg_core_if_t *core_if)
++{
++ int i;
++ int retval = 0;
++
++/* Checks if the parameter is outside of its valid range of values */
++#define DWC_OTG_PARAM_TEST(_param_,_low_,_high_) \
++ ((dwc_otg_module_params._param_ < (_low_)) || \
++ (dwc_otg_module_params._param_ > (_high_)))
++
++/* If the parameter has been set by the user, check that the parameter value is
++ * within the value range of values. If not, report a module error. */
++#define DWC_OTG_PARAM_ERR(_param_,_low_,_high_,_string_) \
++ do { \
++ if (dwc_otg_module_params._param_ != -1) { \
++ if (DWC_OTG_PARAM_TEST(_param_,(_low_),(_high_))) { \
++ DWC_ERROR("`%d' invalid for parameter `%s'\n", \
++ dwc_otg_module_params._param_, _string_); \
++ dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \
++ retval ++; \
++ } \
++ } \
++ } while (0)
++
++ DWC_OTG_PARAM_ERR(opt,0,1,"opt");
++ DWC_OTG_PARAM_ERR(otg_cap,0,2,"otg_cap");
++ DWC_OTG_PARAM_ERR(dma_enable,0,1,"dma_enable");
++ DWC_OTG_PARAM_ERR(speed,0,1,"speed");
++ DWC_OTG_PARAM_ERR(host_support_fs_ls_low_power,0,1,"host_support_fs_ls_low_power");
++ DWC_OTG_PARAM_ERR(host_ls_low_power_phy_clk,0,1,"host_ls_low_power_phy_clk");
++ DWC_OTG_PARAM_ERR(enable_dynamic_fifo,0,1,"enable_dynamic_fifo");
++ DWC_OTG_PARAM_ERR(data_fifo_size,32,32768,"data_fifo_size");
++ DWC_OTG_PARAM_ERR(dev_rx_fifo_size,16,32768,"dev_rx_fifo_size");
++ DWC_OTG_PARAM_ERR(dev_nperio_tx_fifo_size,16,32768,"dev_nperio_tx_fifo_size");
++ DWC_OTG_PARAM_ERR(host_rx_fifo_size,16,32768,"host_rx_fifo_size");
++ DWC_OTG_PARAM_ERR(host_nperio_tx_fifo_size,16,32768,"host_nperio_tx_fifo_size");
++ DWC_OTG_PARAM_ERR(host_perio_tx_fifo_size,16,32768,"host_perio_tx_fifo_size");
++ DWC_OTG_PARAM_ERR(max_transfer_size,2047,524288,"max_transfer_size");
++ DWC_OTG_PARAM_ERR(max_packet_count,15,511,"max_packet_count");
++ DWC_OTG_PARAM_ERR(host_channels,1,16,"host_channels");
++ DWC_OTG_PARAM_ERR(dev_endpoints,1,15,"dev_endpoints");
++ DWC_OTG_PARAM_ERR(phy_type,0,2,"phy_type");
++ DWC_OTG_PARAM_ERR(phy_ulpi_ddr,0,1,"phy_ulpi_ddr");
++ DWC_OTG_PARAM_ERR(phy_ulpi_ext_vbus,0,1,"phy_ulpi_ext_vbus");
++ DWC_OTG_PARAM_ERR(i2c_enable,0,1,"i2c_enable");
++ DWC_OTG_PARAM_ERR(ulpi_fs_ls,0,1,"ulpi_fs_ls");
++ DWC_OTG_PARAM_ERR(ts_dline,0,1,"ts_dline");
++
++ if (dwc_otg_module_params.dma_burst_size != -1) {
++ if (DWC_OTG_PARAM_TEST(dma_burst_size,1,1) &&
++ DWC_OTG_PARAM_TEST(dma_burst_size,4,4) &&
++ DWC_OTG_PARAM_TEST(dma_burst_size,8,8) &&
++ DWC_OTG_PARAM_TEST(dma_burst_size,16,16) &&
++ DWC_OTG_PARAM_TEST(dma_burst_size,32,32) &&
++ DWC_OTG_PARAM_TEST(dma_burst_size,64,64) &&
++ DWC_OTG_PARAM_TEST(dma_burst_size,128,128) &&
++ DWC_OTG_PARAM_TEST(dma_burst_size,256,256))
++ {
++ DWC_ERROR("`%d' invalid for parameter `dma_burst_size'\n",
++ dwc_otg_module_params.dma_burst_size);
++ dwc_otg_module_params.dma_burst_size = 32;
++ retval ++;
++ }
++ }
++
++ if (dwc_otg_module_params.phy_utmi_width != -1) {
++ if (DWC_OTG_PARAM_TEST(phy_utmi_width,8,8) &&
++ DWC_OTG_PARAM_TEST(phy_utmi_width,16,16))
++ {
++ DWC_ERROR("`%d' invalid for parameter `phy_utmi_width'\n",
++ dwc_otg_module_params.phy_utmi_width);
++ //dwc_otg_module_params.phy_utmi_width = 16;
++ dwc_otg_module_params.phy_utmi_width = 8;
++ retval ++;
++ }
++ }
++
++ for (i=0; i<15; i++) {
++ /** @todo should be like above */
++ //DWC_OTG_PARAM_ERR(dev_perio_tx_fifo_size[i],4,768,"dev_perio_tx_fifo_size");
++ if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) {
++ if (DWC_OTG_PARAM_TEST(dev_perio_tx_fifo_size[i],4,768)) {
++ DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
++ dwc_otg_module_params.dev_perio_tx_fifo_size[i], "dev_perio_tx_fifo_size", i);
++ dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default;
++ retval ++;
++ }
++ }
++ }
++
++ DWC_OTG_PARAM_ERR(en_multiple_tx_fifo, 0, 1, "en_multiple_tx_fifo");
++ for (i = 0; i < 15; i++) {
++ /** @todo should be like above */
++ //DWC_OTG_PARAM_ERR(dev_tx_fifo_size[i],4,768,"dev_tx_fifo_size");
++ if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) {
++ if (DWC_OTG_PARAM_TEST(dev_tx_fifo_size[i], 4, 768)) {
++ DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
++ dwc_otg_module_params.dev_tx_fifo_size[i],
++ "dev_tx_fifo_size", i);
++ dwc_otg_module_params.dev_tx_fifo_size[i] =
++ dwc_param_dev_tx_fifo_size_default;
++ retval++;
++ }
++ }
++ }
++ DWC_OTG_PARAM_ERR(thr_ctl, 0, 7, "thr_ctl");
++ DWC_OTG_PARAM_ERR(tx_thr_length, 8, 128, "tx_thr_length");
++ DWC_OTG_PARAM_ERR(rx_thr_length, 8, 128, "rx_thr_length");
++
++ /* At this point, all module parameters that have been set by the user
++ * are valid, and those that have not are left unset. Now set their
++ * default values and/or check the parameters against the hardware
++ * configurations of the OTG core. */
++
++
++
++/* This sets the parameter to the default value if it has not been set by the
++ * user */
++#define DWC_OTG_PARAM_SET_DEFAULT(_param_) \
++ ({ \
++ int changed = 1; \
++ if (dwc_otg_module_params._param_ == -1) { \
++ changed = 0; \
++ dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \
++ } \
++ changed; \
++ })
++
++/* This checks the macro agains the hardware configuration to see if it is
++ * valid. It is possible that the default value could be invalid. In this
++ * case, it will report a module error if the user touched the parameter.
++ * Otherwise it will adjust the value without any error. */
++#define DWC_OTG_PARAM_CHECK_VALID(_param_,_str_,_is_valid_,_set_valid_) \
++ ({ \
++ int changed = DWC_OTG_PARAM_SET_DEFAULT(_param_); \
++ int error = 0; \
++ if (!(_is_valid_)) { \
++ if (changed) { \
++ DWC_ERROR("`%d' invalid for parameter `%s'. Check HW configuration.\n", dwc_otg_module_params._param_,_str_); \
++ error = 1; \
++ } \
++ dwc_otg_module_params._param_ = (_set_valid_); \
++ } \
++ error; \
++ })
++
++ /* OTG Cap */
++ retval += DWC_OTG_PARAM_CHECK_VALID(otg_cap,"otg_cap",
++ ({
++ int valid;
++ valid = 1;
++ switch (dwc_otg_module_params.otg_cap) {
++ case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE:
++ if (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) valid = 0;
++ break;
++ case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE:
++ if ((core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) &&
++ (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) &&
++ (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) &&
++ (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST))
++ {
++ valid = 0;
++ }
++ break;
++ case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE:
++ /* always valid */
++ break;
++ }
++ valid;
++ }),
++ (((core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ||
++ (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) ||
++ (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
++ (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ?
++ DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE :
++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE));
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(dma_enable,"dma_enable",
++ ((dwc_otg_module_params.dma_enable == 1) && (core_if->hwcfg2.b.architecture == 0)) ? 0 : 1,
++ 0);
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(opt,"opt",
++ 1,
++ 0);
++
++ DWC_OTG_PARAM_SET_DEFAULT(dma_burst_size);
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(host_support_fs_ls_low_power,
++ "host_support_fs_ls_low_power",
++ 1, 0);
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(enable_dynamic_fifo,
++ "enable_dynamic_fifo",
++ ((dwc_otg_module_params.enable_dynamic_fifo == 0) ||
++ (core_if->hwcfg2.b.dynamic_fifo == 1)), 0);
++
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(data_fifo_size,
++ "data_fifo_size",
++ (dwc_otg_module_params.data_fifo_size <= core_if->hwcfg3.b.dfifo_depth),
++ core_if->hwcfg3.b.dfifo_depth);
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(dev_rx_fifo_size,
++ "dev_rx_fifo_size",
++ (dwc_otg_module_params.dev_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)),
++ dwc_read_reg32(&core_if->core_global_regs->grxfsiz));
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(dev_nperio_tx_fifo_size,
++ "dev_nperio_tx_fifo_size",
++ (dwc_otg_module_params.dev_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)),
++ (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16));
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(host_rx_fifo_size,
++ "host_rx_fifo_size",
++ (dwc_otg_module_params.host_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)),
++ dwc_read_reg32(&core_if->core_global_regs->grxfsiz));
++
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(host_nperio_tx_fifo_size,
++ "host_nperio_tx_fifo_size",
++ (dwc_otg_module_params.host_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)),
++ (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16));
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(host_perio_tx_fifo_size,
++ "host_perio_tx_fifo_size",
++ (dwc_otg_module_params.host_perio_tx_fifo_size <= ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16))),
++ ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16)));
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(max_transfer_size,
++ "max_transfer_size",
++ (dwc_otg_module_params.max_transfer_size < (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))),
++ ((1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1));
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(max_packet_count,
++ "max_packet_count",
++ (dwc_otg_module_params.max_packet_count < (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))),
++ ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1));
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(host_channels,
++ "host_channels",
++ (dwc_otg_module_params.host_channels <= (core_if->hwcfg2.b.num_host_chan + 1)),
++ (core_if->hwcfg2.b.num_host_chan + 1));
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(dev_endpoints,
++ "dev_endpoints",
++ (dwc_otg_module_params.dev_endpoints <= (core_if->hwcfg2.b.num_dev_ep)),
++ core_if->hwcfg2.b.num_dev_ep);
++
++/*
++ * Define the following to disable the FS PHY Hardware checking. This is for
++ * internal testing only.
++ *
++ * #define NO_FS_PHY_HW_CHECKS
++ */
++
++#ifdef NO_FS_PHY_HW_CHECKS
++ retval += DWC_OTG_PARAM_CHECK_VALID(phy_type,
++ "phy_type", 1, 0);
++#else
++ retval += DWC_OTG_PARAM_CHECK_VALID(phy_type,
++ "phy_type",
++ ({
++ int valid = 0;
++ if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_UTMI) &&
++ ((core_if->hwcfg2.b.hs_phy_type == 1) ||
++ (core_if->hwcfg2.b.hs_phy_type == 3)))
++ {
++ valid = 1;
++ }
++ else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_ULPI) &&
++ ((core_if->hwcfg2.b.hs_phy_type == 2) ||
++ (core_if->hwcfg2.b.hs_phy_type == 3)))
++ {
++ valid = 1;
++ }
++ else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) &&
++ (core_if->hwcfg2.b.fs_phy_type == 1))
++ {
++ valid = 1;
++ }
++ valid;
++ }),
++ ({
++ int set = DWC_PHY_TYPE_PARAM_FS;
++ if (core_if->hwcfg2.b.hs_phy_type) {
++ if ((core_if->hwcfg2.b.hs_phy_type == 3) ||
++ (core_if->hwcfg2.b.hs_phy_type == 1)) {
++ set = DWC_PHY_TYPE_PARAM_UTMI;
++ }
++ else {
++ set = DWC_PHY_TYPE_PARAM_ULPI;
++ }
++ }
++ set;
++ }));
++#endif
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(speed,"speed",
++ (dwc_otg_module_params.speed == 0) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1,
++ dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS ? 1 : 0);
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(host_ls_low_power_phy_clk,
++ "host_ls_low_power_phy_clk",
++ ((dwc_otg_module_params.host_ls_low_power_phy_clk == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1),
++ ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ : DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ));
++
++ DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ddr);
++ DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ext_vbus);
++ DWC_OTG_PARAM_SET_DEFAULT(phy_utmi_width);
++ DWC_OTG_PARAM_SET_DEFAULT(ulpi_fs_ls);
++ DWC_OTG_PARAM_SET_DEFAULT(ts_dline);
++
++#ifdef NO_FS_PHY_HW_CHECKS
++ retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable,
++ "i2c_enable", 1, 0);
++#else
++ retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable,
++ "i2c_enable",
++ (dwc_otg_module_params.i2c_enable == 1) && (core_if->hwcfg3.b.i2c == 0) ? 0 : 1,
++ 0);
++#endif
++
++ for (i=0; i<16; i++) {
++
++ int changed = 1;
++ int error = 0;
++
++ if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] == -1) {
++ changed = 0;
++ dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default;
++ }
++ if (!(dwc_otg_module_params.dev_perio_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) {
++ if (changed) {
++ DWC_ERROR("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_perio_tx_fifo_size[i],i);
++ error = 1;
++ }
++ dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]);
++ }
++ retval += error;
++ }
++
++ retval += DWC_OTG_PARAM_CHECK_VALID(en_multiple_tx_fifo,
++ "en_multiple_tx_fifo",
++ ((dwc_otg_module_params.en_multiple_tx_fifo == 1) &&
++ (core_if->hwcfg4.b.ded_fifo_en == 0)) ? 0 : 1, 0);
++
++ for (i = 0; i < 16; i++) {
++ int changed = 1;
++ int error = 0;
++ if (dwc_otg_module_params.dev_tx_fifo_size[i] == -1) {
++ changed = 0;
++ dwc_otg_module_params.dev_tx_fifo_size[i] =
++ dwc_param_dev_tx_fifo_size_default;
++ }
++ if (!(dwc_otg_module_params.dev_tx_fifo_size[i] <=
++ (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) {
++ if (changed) {
++ DWC_ERROR("%d' invalid for parameter `dev_perio_fifo_size_%d'."
++ "Check HW configuration.\n",dwc_otg_module_params.dev_tx_fifo_size[i],i);
++ error = 1;
++ }
++ dwc_otg_module_params.dev_tx_fifo_size[i] =
++ dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]);
++ }
++ retval += error;
++ }
++ DWC_OTG_PARAM_SET_DEFAULT(thr_ctl);
++ DWC_OTG_PARAM_SET_DEFAULT(tx_thr_length);
++ DWC_OTG_PARAM_SET_DEFAULT(rx_thr_length);
++ return retval;
++} // check_parameters
++
++
++/**
++ * This function is the top level interrupt handler for the Common
++ * (Device and host modes) interrupts.
++ */
++static irqreturn_t dwc_otg_common_irq(int _irq, void *_dev)
++{
++ dwc_otg_device_t *otg_dev = _dev;
++ int32_t retval = IRQ_NONE;
++
++ retval = dwc_otg_handle_common_intr( otg_dev->core_if );
++
++ mask_and_ack_ifx_irq (_irq);
++
++ return IRQ_RETVAL(retval);
++}
++
++
++/**
++ * This function is called when a DWC_OTG device is unregistered with the
++ * dwc_otg_driver. This happens, for example, when the rmmod command is
++ * executed. The device may or may not be electrically present. If it is
++ * present, the driver stops device processing. Any resources used on behalf
++ * of this device are freed.
++ *
++ * @return
++ */
++static int
++dwc_otg_driver_remove(struct platform_device *_dev)
++{
++ //dwc_otg_device_t *otg_dev = dev_get_drvdata(&_dev->dev);
++ dwc_otg_device_t *otg_dev = platform_get_drvdata(_dev);
++
++ DWC_DEBUGPL(DBG_ANY, "%s(%p)\n", __func__, _dev);
++
++ if (otg_dev == NULL) {
++ /* Memory allocation for the dwc_otg_device failed. */
++ return 0;
++ }
++
++ /*
++ * Free the IRQ
++ */
++ if (otg_dev->common_irq_installed) {
++ free_irq( otg_dev->irq, otg_dev );
++ }
++
++#ifndef DWC_DEVICE_ONLY
++ if (otg_dev->hcd != NULL) {
++ dwc_otg_hcd_remove(&_dev->dev);
++ }
++#endif
++ printk("after removehcd\n");
++
++// Note: Integrate HOST and DEVICE(Gadget) is not planned yet.
++#ifndef DWC_HOST_ONLY
++ if (otg_dev->pcd != NULL) {
++ dwc_otg_pcd_remove(otg_dev);
++ }
++#endif
++ if (otg_dev->core_if != NULL) {
++ dwc_otg_cil_remove( otg_dev->core_if );
++ }
++ printk("after removecil\n");
++
++ /*
++ * Remove the device attributes
++ */
++ dwc_otg_attr_remove(&_dev->dev);
++ printk("after removeattr\n");
++
++ /*
++ * Return the memory.
++ */
++ if (otg_dev->base != NULL) {
++ iounmap(otg_dev->base);
++ }
++ if (otg_dev->phys_addr != 0) {
++ release_mem_region(otg_dev->phys_addr, otg_dev->base_len);
++ }
++ kfree(otg_dev);
++
++ /*
++ * Clear the drvdata pointer.
++ */
++ //dev_set_drvdata(&_dev->dev, 0);
++ platform_set_drvdata(_dev, 0);
++ return 0;
++}
++
++/**
++ * This function is called when an DWC_OTG device is bound to a
++ * dwc_otg_driver. It creates the driver components required to
++ * control the device (CIL, HCD, and PCD) and it initializes the
++ * device. The driver components are stored in a dwc_otg_device
++ * structure. A reference to the dwc_otg_device is saved in the
++ * lm_device. This allows the driver to access the dwc_otg_device
++ * structure on subsequent calls to driver methods for this device.
++ *
++ * @return
++ */
++static int __devinit
++dwc_otg_driver_probe(struct platform_device *_dev)
++{
++ int retval = 0;
++ dwc_otg_device_t *dwc_otg_device;
++ int pin = (int)_dev->dev.platform_data;
++ int32_t snpsid;
++ struct resource *res;
++ gusbcfg_data_t usbcfg = {.d32 = 0};
++
++ // GPIOs
++ if(pin >= 0)
++ {
++ gpio_request(pin, "usb_power");
++ gpio_direction_output(pin, 1);
++ gpio_set_value(pin, 1);
++ gpio_export(pin, 0);
++ }
++ dev_dbg(&_dev->dev, "dwc_otg_driver_probe (%p)\n", _dev);
++
++ dwc_otg_device = kmalloc(sizeof(dwc_otg_device_t), GFP_KERNEL);
++ if (dwc_otg_device == 0) {
++ dev_err(&_dev->dev, "kmalloc of dwc_otg_device failed\n");
++ retval = -ENOMEM;
++ goto fail;
++ }
++ memset(dwc_otg_device, 0, sizeof(*dwc_otg_device));
++ dwc_otg_device->reg_offset = 0xFFFFFFFF;
++
++ /*
++ * Retrieve the memory and IRQ resources.
++ */
++ dwc_otg_device->irq = platform_get_irq(_dev, 0);
++ if (dwc_otg_device->irq == 0) {
++ dev_err(&_dev->dev, "no device irq\n");
++ retval = -ENODEV;
++ goto fail;
++ }
++ dev_dbg(&_dev->dev, "OTG - device irq: %d\n", dwc_otg_device->irq);
++ res = platform_get_resource(_dev, IORESOURCE_MEM, 0);
++ if (res == NULL) {
++ dev_err(&_dev->dev, "no CSR address\n");
++ retval = -ENODEV;
++ goto fail;
++ }
++ dev_dbg(&_dev->dev, "OTG - ioresource_mem start0x%08x: end:0x%08x\n",
++ (unsigned)res->start, (unsigned)res->end);
++ dwc_otg_device->phys_addr = res->start;
++ dwc_otg_device->base_len = res->end - res->start + 1;
++ if (request_mem_region(dwc_otg_device->phys_addr, dwc_otg_device->base_len,
++ dwc_driver_name) == NULL) {
++ dev_err(&_dev->dev, "request_mem_region failed\n");
++ retval = -EBUSY;
++ goto fail;
++ }
++
++ /*
++ * Map the DWC_otg Core memory into virtual address space.
++ */
++ dwc_otg_device->base = ioremap_nocache(dwc_otg_device->phys_addr, dwc_otg_device->base_len);
++ if (dwc_otg_device->base == NULL) {
++ dev_err(&_dev->dev, "ioremap() failed\n");
++ retval = -ENOMEM;
++ goto fail;
++ }
++ dev_dbg(&_dev->dev, "mapped base=0x%08x\n", (unsigned)dwc_otg_device->base);
++
++ /*
++ * Attempt to ensure this device is really a DWC_otg Controller.
++ * Read and verify the SNPSID register contents. The value should be
++ * 0x45F42XXX, which corresponds to "OT2", as in "OTG version 2.XX".
++ */
++ snpsid = dwc_read_reg32((uint32_t *)((uint8_t *)dwc_otg_device->base + 0x40));
++ if ((snpsid & 0xFFFFF000) != 0x4F542000) {
++ dev_err(&_dev->dev, "Bad value for SNPSID: 0x%08x\n", snpsid);
++ retval = -EINVAL;
++ goto fail;
++ }
++
++ /*
++ * Initialize driver data to point to the global DWC_otg
++ * Device structure.
++ */
++ platform_set_drvdata(_dev, dwc_otg_device);
++ dev_dbg(&_dev->dev, "dwc_otg_device=0x%p\n", dwc_otg_device);
++ dwc_otg_device->core_if = dwc_otg_cil_init( dwc_otg_device->base, &dwc_otg_module_params);
++ if (dwc_otg_device->core_if == 0) {
++ dev_err(&_dev->dev, "CIL initialization failed!\n");
++ retval = -ENOMEM;
++ goto fail;
++ }
++
++ /*
++ * Validate parameter values.
++ */
++ if (check_parameters(dwc_otg_device->core_if) != 0) {
++ retval = -EINVAL;
++ goto fail;
++ }
++
++ /* Added for PLB DMA phys virt mapping */
++ //dwc_otg_device->core_if->phys_addr = dwc_otg_device->phys_addr;
++ /*
++ * Create Device Attributes in sysfs
++ */
++ dwc_otg_attr_create (&_dev->dev);
++
++ /*
++ * Disable the global interrupt until all the interrupt
++ * handlers are installed.
++ */
++ dwc_otg_disable_global_interrupts( dwc_otg_device->core_if );
++ /*
++ * Install the interrupt handler for the common interrupts before
++ * enabling common interrupts in core_init below.
++ */
++ DWC_DEBUGPL( DBG_CIL, "registering (common) handler for irq%d\n", dwc_otg_device->irq);
++
++ retval = request_irq((unsigned int)dwc_otg_device->irq, dwc_otg_common_irq,
++ //SA_INTERRUPT|SA_SHIRQ, "dwc_otg", (void *)dwc_otg_device );
++ IRQF_SHARED, "dwc_otg", (void *)dwc_otg_device );
++ //IRQF_DISABLED, "dwc_otg", (void *)dwc_otg_device );
++ if (retval != 0) {
++ DWC_ERROR("request of irq%d failed retval: %d\n", dwc_otg_device->irq, retval);
++ retval = -EBUSY;
++ goto fail;
++ } else {
++ dwc_otg_device->common_irq_installed = 1;
++ }
++
++ /*
++ * Initialize the DWC_otg core.
++ */
++ dwc_otg_core_init( dwc_otg_device->core_if );
++
++
++#ifndef DWC_HOST_ONLY // otg device mode. (gadget.)
++ /*
++ * Initialize the PCD
++ */
++ retval = dwc_otg_pcd_init(dwc_otg_device);
++ if (retval != 0) {
++ DWC_ERROR("dwc_otg_pcd_init failed\n");
++ dwc_otg_device->pcd = NULL;
++ goto fail;
++ }
++#endif // DWC_HOST_ONLY
++
++#ifndef DWC_DEVICE_ONLY // otg host mode. (HCD)
++ /*
++ * Initialize the HCD
++ */
++#if 1 /*fscz*/
++ /* force_host_mode */
++ usbcfg.d32 = dwc_read_reg32(&dwc_otg_device->core_if->core_global_regs ->gusbcfg);
++ usbcfg.b.force_host_mode = 1;
++ dwc_write_reg32(&dwc_otg_device->core_if->core_global_regs ->gusbcfg, usbcfg.d32);
++#endif
++ retval = dwc_otg_hcd_init(&_dev->dev, dwc_otg_device);
++ if (retval != 0) {
++ DWC_ERROR("dwc_otg_hcd_init failed\n");
++ dwc_otg_device->hcd = NULL;
++ goto fail;
++ }
++#endif // DWC_DEVICE_ONLY
++
++ /*
++ * Enable the global interrupt after all the interrupt
++ * handlers are installed.
++ */
++ dwc_otg_enable_global_interrupts( dwc_otg_device->core_if );
++#if 0 /*fscz*/
++ usbcfg.d32 = dwc_read_reg32(&dwc_otg_device->core_if->core_global_regs ->gusbcfg);
++ usbcfg.b.force_host_mode = 0;
++ dwc_write_reg32(&dwc_otg_device->core_if->core_global_regs ->gusbcfg, usbcfg.d32);
++#endif
++
++
++ return 0;
++
++fail:
++ dwc_otg_driver_remove(_dev);
++ return retval;
++}
++
++/**
++ * This structure defines the methods to be called by a bus driver
++ * during the lifecycle of a device on that bus. Both drivers and
++ * devices are registered with a bus driver. The bus driver matches
++ * devices to drivers based on information in the device and driver
++ * structures.
++ *
++ * The probe function is called when the bus driver matches a device
++ * to this driver. The remove function is called when a device is
++ * unregistered with the bus driver.
++ */
++struct platform_driver dwc_otg_driver = {
++ .probe = dwc_otg_driver_probe,
++ .remove = dwc_otg_driver_remove,
++// .suspend = dwc_otg_driver_suspend,
++// .resume = dwc_otg_driver_resume,
++ .driver = {
++ .name = dwc_driver_name,
++ .owner = THIS_MODULE,
++ },
++};
++EXPORT_SYMBOL(dwc_otg_driver);
++
++/**
++ * This function is called when the dwc_otg_driver is installed with the
++ * insmod command. It registers the dwc_otg_driver structure with the
++ * appropriate bus driver. This will cause the dwc_otg_driver_probe function
++ * to be called. In addition, the bus driver will automatically expose
++ * attributes defined for the device and driver in the special sysfs file
++ * system.
++ *
++ * @return
++ */
++static int __init dwc_otg_init(void)
++{
++ int retval = 0;
++
++ printk(KERN_INFO "%s: version %s\n", dwc_driver_name, DWC_DRIVER_VERSION);
++
++ // ifxmips setup
++ retval = ifx_usb_hc_init(dwc_iomem_base, dwc_irq);
++ if (retval < 0)
++ {
++ printk(KERN_ERR "%s retval=%d\n", __func__, retval);
++ return retval;
++ }
++ dwc_otg_power_on(); // ifx only!!
++
++
++ retval = platform_driver_register(&dwc_otg_driver);
++
++ if (retval < 0) {
++ printk(KERN_ERR "%s retval=%d\n", __func__, retval);
++ goto error1;
++ }
++
++ retval = driver_create_file(&dwc_otg_driver.driver, &driver_attr_version);
++ if (retval < 0)
++ {
++ printk(KERN_ERR "%s retval=%d\n", __func__, retval);
++ goto error2;
++ }
++ retval = driver_create_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
++ if (retval < 0)
++ {
++ printk(KERN_ERR "%s retval=%d\n", __func__, retval);
++ goto error3;
++ }
++ return retval;
++
++
++error3:
++ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version);
++error2:
++ driver_unregister(&dwc_otg_driver.driver);
++error1:
++ ifx_usb_hc_remove();
++ return retval;
++}
++module_init(dwc_otg_init);
++
++/**
++ * This function is called when the driver is removed from the kernel
++ * with the rmmod command. The driver unregisters itself with its bus
++ * driver.
++ *
++ */
++static void __exit dwc_otg_cleanup(void)
++{
++ printk(KERN_DEBUG "dwc_otg_cleanup()\n");
++
++ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
++ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version);
++
++ platform_driver_unregister(&dwc_otg_driver);
++ ifx_usb_hc_remove();
++
++ printk(KERN_INFO "%s module removed\n", dwc_driver_name);
++}
++module_exit(dwc_otg_cleanup);
++
++MODULE_DESCRIPTION(DWC_DRIVER_DESC);
++MODULE_AUTHOR("Synopsys Inc.");
++MODULE_LICENSE("GPL");
++
++module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444);
++MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None");
++module_param_named(opt, dwc_otg_module_params.opt, int, 0444);
++MODULE_PARM_DESC(opt, "OPT Mode");
++module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444);
++MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled");
++module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int, 0444);
++MODULE_PARM_DESC(dma_burst_size, "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256");
++module_param_named(speed, dwc_otg_module_params.speed, int, 0444);
++MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed");
++module_param_named(host_support_fs_ls_low_power, dwc_otg_module_params.host_support_fs_ls_low_power, int, 0444);
++MODULE_PARM_DESC(host_support_fs_ls_low_power, "Support Low Power w/FS or LS 0=Support 1=Don't Support");
++module_param_named(host_ls_low_power_phy_clk, dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444);
++MODULE_PARM_DESC(host_ls_low_power_phy_clk, "Low Speed Low Power Clock 0=48Mhz 1=6Mhz");
++module_param_named(enable_dynamic_fifo, dwc_otg_module_params.enable_dynamic_fifo, int, 0444);
++MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing");
++module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int, 0444);
++MODULE_PARM_DESC(data_fifo_size, "Total number of words in the data FIFO memory 32-32768");
++module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size, int, 0444);
++MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
++module_param_named(dev_nperio_tx_fifo_size, dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(dev_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
++module_param_named(dev_perio_tx_fifo_size_1, dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_1, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_2, dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_2, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_3, dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_3, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_4, dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_4, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_5, dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_5, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_6, dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_6, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_7, dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_7, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_8, dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_8, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_9, dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_9, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_10, dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_10, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_11, dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_11, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_12, dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_12, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_13, dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_13, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_14, dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_14, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_15, dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_15, "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size, int, 0444);
++MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
++module_param_named(host_nperio_tx_fifo_size, dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(host_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
++module_param_named(host_perio_tx_fifo_size, dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(host_perio_tx_fifo_size, "Number of words in the host periodic Tx FIFO 16-32768");
++module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size, int, 0444);
++/** @todo Set the max to 512K, modify checks */
++MODULE_PARM_DESC(max_transfer_size, "The maximum transfer size supported in bytes 2047-65535");
++module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count, int, 0444);
++MODULE_PARM_DESC(max_packet_count, "The maximum number of packets in a transfer 15-511");
++module_param_named(host_channels, dwc_otg_module_params.host_channels, int, 0444);
++MODULE_PARM_DESC(host_channels, "The number of host channel registers to use 1-16");
++module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int, 0444);
++MODULE_PARM_DESC(dev_endpoints, "The number of endpoints in addition to EP0 available for device mode 1-15");
++module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444);
++MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI");
++module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int, 0444);
++MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits");
++module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444);
++MODULE_PARM_DESC(phy_ulpi_ddr, "ULPI at double or single data rate 0=Single 1=Double");
++module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus, int, 0444);
++MODULE_PARM_DESC(phy_ulpi_ext_vbus, "ULPI PHY using internal or external vbus 0=Internal");
++module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444);
++MODULE_PARM_DESC(i2c_enable, "FS PHY Interface");
++module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444);
++MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only");
++module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444);
++MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs");
++module_param_named(debug, g_dbg_lvl, int, 0444);
++MODULE_PARM_DESC(debug, "0");
++module_param_named(en_multiple_tx_fifo,
++ dwc_otg_module_params.en_multiple_tx_fifo, int, 0444);
++MODULE_PARM_DESC(en_multiple_tx_fifo,
++ "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled");
++module_param_named(dev_tx_fifo_size_1,
++ dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_2,
++ dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_3,
++ dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_4,
++ dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_5,
++ dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_6,
++ dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_7,
++ dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_8,
++ dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_9,
++ dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_10,
++ dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_11,
++ dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_12,
++ dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_13,
++ dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_14,
++ dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_15,
++ dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768");
++module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444);
++MODULE_PARM_DESC(thr_ctl, "Thresholding enable flag bit"
++ "0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled");
++module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int, 0444);
++MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs");
++module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int, 0444);
++MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs");
++module_param_named (iomem_base, dwc_iomem_base, ulong, 0444);
++MODULE_PARM_DESC (dwc_iomem_base, "The base address of the DWC_OTG register.");
++module_param_named (irq, dwc_irq, int, 0444);
++MODULE_PARM_DESC (dwc_irq, "The interrupt number");
++
++/** @page "Module Parameters"
++ *
++ * The following parameters may be specified when starting the module.
++ * These parameters define how the DWC_otg controller should be
++ * configured. Parameter values are passed to the CIL initialization
++ * function dwc_otg_cil_init
++ *
++ * Example: <code>modprobe dwc_otg speed=1 otg_cap=1</code>
++ *
++
++ <table>
++ <tr><td>Parameter Name</td><td>Meaning</td></tr>
++
++ <tr>
++ <td>otg_cap</td>
++ <td>Specifies the OTG capabilities. The driver will automatically detect the
++ value for this parameter if none is specified.
++ - 0: HNP and SRP capable (default, if available)
++ - 1: SRP Only capable
++ - 2: No HNP/SRP capable
++ </td></tr>
++
++ <tr>
++ <td>dma_enable</td>
++ <td>Specifies whether to use slave or DMA mode for accessing the data FIFOs.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: Slave
++ - 1: DMA (default, if available)
++ </td></tr>
++
++ <tr>
++ <td>dma_burst_size</td>
++ <td>The DMA Burst size (applicable only for External DMA Mode).
++ - Values: 1, 4, 8 16, 32, 64, 128, 256 (default 32)
++ </td></tr>
++
++ <tr>
++ <td>speed</td>
++ <td>Specifies the maximum speed of operation in host and device mode. The
++ actual speed depends on the speed of the attached device and the value of
++ phy_type.
++ - 0: High Speed (default)
++ - 1: Full Speed
++ </td></tr>
++
++ <tr>
++ <td>host_support_fs_ls_low_power</td>
++ <td>Specifies whether low power mode is supported when attached to a Full
++ Speed or Low Speed device in host mode.
++ - 0: Don't support low power mode (default)
++ - 1: Support low power mode
++ </td></tr>
++
++ <tr>
++ <td>host_ls_low_power_phy_clk</td>
++ <td>Specifies the PHY clock rate in low power mode when connected to a Low
++ Speed device in host mode. This parameter is applicable only if
++ HOST_SUPPORT_FS_LS_LOW_POWER is enabled.
++ - 0: 48 MHz (default)
++ - 1: 6 MHz
++ </td></tr>
++
++ <tr>
++ <td>enable_dynamic_fifo</td>
++ <td> Specifies whether FIFOs may be resized by the driver software.
++ - 0: Use cC FIFO size parameters
++ - 1: Allow dynamic FIFO sizing (default)
++ </td></tr>
++
++ <tr>
++ <td>data_fifo_size</td>
++ <td>Total number of 4-byte words in the data FIFO memory. This memory
++ includes the Rx FIFO, non-periodic Tx FIFO, and periodic Tx FIFOs.
++ - Values: 32 to 32768 (default 8192)
++
++ Note: The total FIFO memory depth in the FPGA configuration is 8192.
++ </td></tr>
++
++ <tr>
++ <td>dev_rx_fifo_size</td>
++ <td>Number of 4-byte words in the Rx FIFO in device mode when dynamic
++ FIFO sizing is enabled.
++ - Values: 16 to 32768 (default 1064)
++ </td></tr>
++
++ <tr>
++ <td>dev_nperio_tx_fifo_size</td>
++ <td>Number of 4-byte words in the non-periodic Tx FIFO in device mode when
++ dynamic FIFO sizing is enabled.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++
++ <tr>
++ <td>dev_perio_tx_fifo_size_n (n = 1 to 15)</td>
++ <td>Number of 4-byte words in each of the periodic Tx FIFOs in device mode
++ when dynamic FIFO sizing is enabled.
++ - Values: 4 to 768 (default 256)
++ </td></tr>
++
++ <tr>
++ <td>host_rx_fifo_size</td>
++ <td>Number of 4-byte words in the Rx FIFO in host mode when dynamic FIFO
++ sizing is enabled.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++
++ <tr>
++ <td>host_nperio_tx_fifo_size</td>
++ <td>Number of 4-byte words in the non-periodic Tx FIFO in host mode when
++ dynamic FIFO sizing is enabled in the core.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++
++ <tr>
++ <td>host_perio_tx_fifo_size</td>
++ <td>Number of 4-byte words in the host periodic Tx FIFO when dynamic FIFO
++ sizing is enabled.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++
++ <tr>
++ <td>max_transfer_size</td>
++ <td>The maximum transfer size supported in bytes.
++ - Values: 2047 to 65,535 (default 65,535)
++ </td></tr>
++
++ <tr>
++ <td>max_packet_count</td>
++ <td>The maximum number of packets in a transfer.
++ - Values: 15 to 511 (default 511)
++ </td></tr>
++
++ <tr>
++ <td>host_channels</td>
++ <td>The number of host channel registers to use.
++ - Values: 1 to 16 (default 12)
++
++ Note: The FPGA configuration supports a maximum of 12 host channels.
++ </td></tr>
++
++ <tr>
++ <td>dev_endpoints</td>
++ <td>The number of endpoints in addition to EP0 available for device mode
++ operations.
++ - Values: 1 to 15 (default 6 IN and OUT)
++
++ Note: The FPGA configuration supports a maximum of 6 IN and OUT endpoints in
++ addition to EP0.
++ </td></tr>
++
++ <tr>
++ <td>phy_type</td>
++ <td>Specifies the type of PHY interface to use. By default, the driver will
++ automatically detect the phy_type.
++ - 0: Full Speed
++ - 1: UTMI+ (default, if available)
++ - 2: ULPI
++ </td></tr>
++
++ <tr>
++ <td>phy_utmi_width</td>
++ <td>Specifies the UTMI+ Data Width. This parameter is applicable for a
++ phy_type of UTMI+. Also, this parameter is applicable only if the
++ OTG_HSPHY_WIDTH cC parameter was set to "8 and 16 bits", meaning that the
++ core has been configured to work at either data path width.
++ - Values: 8 or 16 bits (default 16)
++ </td></tr>
++
++ <tr>
++ <td>phy_ulpi_ddr</td>
++ <td>Specifies whether the ULPI operates at double or single data rate. This
++ parameter is only applicable if phy_type is ULPI.
++ - 0: single data rate ULPI interface with 8 bit wide data bus (default)
++ - 1: double data rate ULPI interface with 4 bit wide data bus
++ </td></tr>
++
++ <tr>
++ <td>i2c_enable</td>
++ <td>Specifies whether to use the I2C interface for full speed PHY. This
++ parameter is only applicable if PHY_TYPE is FS.
++ - 0: Disabled (default)
++ - 1: Enabled
++ </td></tr>
++
++ <tr>
++ <td>otg_en_multiple_tx_fifo</td>
++ <td>Specifies whether dedicatedto tx fifos are enabled for non periodic IN EPs.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: Disabled
++ - 1: Enabled (default, if available)
++ </td></tr>
++
++ <tr>
++ <td>dev_tx_fifo_size_n (n = 1 to 15)</td>
++ <td>Number of 4-byte words in each of the Tx FIFOs in device mode
++ when dynamic FIFO sizing is enabled.
++ - Values: 4 to 768 (default 256)
++ </td></tr>
++
++*/
+diff --git a/drivers/usb/dwc_otg/dwc_otg_driver.h b/drivers/usb/dwc_otg/dwc_otg_driver.h
+new file mode 100644
+index 0000000..7e6940d
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_driver.h
+@@ -0,0 +1,84 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_driver.h $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 510275 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_OTG_DRIVER_H__)
++#define __DWC_OTG_DRIVER_H__
++
++/** @file
++ * This file contains the interface to the Linux driver.
++ */
++#include "dwc_otg_cil.h"
++
++/* Type declarations */
++struct dwc_otg_pcd;
++struct dwc_otg_hcd;
++
++/**
++ * This structure is a wrapper that encapsulates the driver components used to
++ * manage a single DWC_otg controller.
++ */
++typedef struct dwc_otg_device
++{
++ /** Base address returned from ioremap() */
++ void *base;
++
++ /** Pointer to the core interface structure. */
++ dwc_otg_core_if_t *core_if;
++
++ /** Register offset for Diagnostic API.*/
++ uint32_t reg_offset;
++
++ /** Pointer to the PCD structure. */
++ struct dwc_otg_pcd *pcd;
++
++ /** Pointer to the HCD structure. */
++ struct dwc_otg_hcd *hcd;
++
++ /** Flag to indicate whether the common IRQ handler is installed. */
++ uint8_t common_irq_installed;
++
++ /** Interrupt request number. */
++ unsigned int irq;
++
++ /** Physical address of Control and Status registers, used by
++ * release_mem_region().
++ */
++ resource_size_t phys_addr;
++
++ /** Length of memory region, used by release_mem_region(). */
++ unsigned long base_len;
++} dwc_otg_device_t;
++
++//#define dev_dbg(fake, format, arg...) printk(KERN_CRIT __FILE__ ":%d: " format "\n" , __LINE__, ## arg)
++
++#endif
+diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd.c b/drivers/usb/dwc_otg/dwc_otg_hcd.c
+new file mode 100644
+index 0000000..ad6bc72
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_hcd.c
+@@ -0,0 +1,2870 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd.c $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 631780 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++/**
++ * @file
++ *
++ * This file contains the implementation of the HCD. In Linux, the HCD
++ * implements the hc_driver API.
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++
++#include <linux/device.h>
++
++#include <linux/errno.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/string.h>
++
++#include <linux/dma-mapping.h>
++
++#include "dwc_otg_driver.h"
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++
++#include <asm/irq.h>
++#include "dwc_otg_ifx.h" // for Infineon platform specific.
++extern atomic_t release_later;
++
++static u64 dma_mask = DMA_BIT_MASK(32);
++
++static const char dwc_otg_hcd_name [] = "dwc_otg_hcd";
++static const struct hc_driver dwc_otg_hc_driver =
++{
++ .description = dwc_otg_hcd_name,
++ .product_desc = "DWC OTG Controller",
++ .hcd_priv_size = sizeof(dwc_otg_hcd_t),
++ .irq = dwc_otg_hcd_irq,
++ .flags = HCD_MEMORY | HCD_USB2,
++ //.reset =
++ .start = dwc_otg_hcd_start,
++ //.suspend =
++ //.resume =
++ .stop = dwc_otg_hcd_stop,
++ .urb_enqueue = dwc_otg_hcd_urb_enqueue,
++ .urb_dequeue = dwc_otg_hcd_urb_dequeue,
++ .endpoint_disable = dwc_otg_hcd_endpoint_disable,
++ .get_frame_number = dwc_otg_hcd_get_frame_number,
++ .hub_status_data = dwc_otg_hcd_hub_status_data,
++ .hub_control = dwc_otg_hcd_hub_control,
++ //.hub_suspend =
++ //.hub_resume =
++};
++
++
++/**
++ * Work queue function for starting the HCD when A-Cable is connected.
++ * The dwc_otg_hcd_start() must be called in a process context.
++ */
++static void hcd_start_func(struct work_struct *work)
++{
++ struct dwc_otg_hcd *priv =
++ container_of(work, struct dwc_otg_hcd, start_work);
++ struct usb_hcd *usb_hcd = (struct usb_hcd *)priv->_p;
++ DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, usb_hcd);
++ if (usb_hcd) {
++ dwc_otg_hcd_start(usb_hcd);
++ }
++}
++
++
++/**
++ * HCD Callback function for starting the HCD when A-Cable is
++ * connected.
++ *
++ * @param _p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_start_cb(void *_p)
++{
++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_p);
++ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++ hprt0_data_t hprt0;
++ if (core_if->op_state == B_HOST) {
++ /*
++ * Reset the port. During a HNP mode switch the reset
++ * needs to occur within 1ms and have a duration of at
++ * least 50ms.
++ */
++ hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++ hprt0.b.prtrst = 1;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ ((struct usb_hcd *)_p)->self.is_b_host = 1;
++ } else {
++ ((struct usb_hcd *)_p)->self.is_b_host = 0;
++ }
++ /* Need to start the HCD in a non-interrupt context. */
++ INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func);
++ dwc_otg_hcd->_p = _p;
++ schedule_work(&dwc_otg_hcd->start_work);
++ return 1;
++}
++
++
++/**
++ * HCD Callback function for stopping the HCD.
++ *
++ * @param _p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_stop_cb( void *_p )
++{
++ struct usb_hcd *usb_hcd = (struct usb_hcd *)_p;
++ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p);
++ dwc_otg_hcd_stop( usb_hcd );
++ return 1;
++}
++static void del_xfer_timers(dwc_otg_hcd_t *_hcd)
++{
++#ifdef DEBUG
++ int i;
++ int num_channels = _hcd->core_if->core_params->host_channels;
++ for (i = 0; i < num_channels; i++) {
++ del_timer(&_hcd->core_if->hc_xfer_timer[i]);
++ }
++#endif /* */
++}
++
++static void del_timers(dwc_otg_hcd_t *_hcd)
++{
++ del_xfer_timers(_hcd);
++ del_timer(&_hcd->conn_timer);
++}
++
++/**
++ * Processes all the URBs in a single list of QHs. Completes them with
++ * -ETIMEDOUT and frees the QTD.
++ */
++static void kill_urbs_in_qh_list(dwc_otg_hcd_t * _hcd,
++ struct list_head *_qh_list)
++{
++ struct list_head *qh_item;
++ dwc_otg_qh_t *qh;
++ struct list_head *qtd_item;
++ dwc_otg_qtd_t *qtd;
++
++ list_for_each(qh_item, _qh_list) {
++ qh = list_entry(qh_item, dwc_otg_qh_t, qh_list_entry);
++ for (qtd_item = qh->qtd_list.next; qtd_item != &qh->qtd_list;
++ qtd_item = qh->qtd_list.next) {
++ qtd = list_entry(qtd_item, dwc_otg_qtd_t, qtd_list_entry);
++ if (qtd->urb != NULL) {
++ dwc_otg_hcd_complete_urb(_hcd, qtd->urb,-ETIMEDOUT);
++ }
++ dwc_otg_hcd_qtd_remove_and_free(qtd);
++ }
++ }
++}
++
++/**
++ * Responds with an error status of ETIMEDOUT to all URBs in the non-periodic
++ * and periodic schedules. The QTD associated with each URB is removed from
++ * the schedule and freed. This function may be called when a disconnect is
++ * detected or when the HCD is being stopped.
++ */
++static void kill_all_urbs(dwc_otg_hcd_t *_hcd)
++{
++ kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_deferred);
++ kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_inactive);
++ kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_active);
++ kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_inactive);
++ kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_ready);
++ kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_assigned);
++ kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_queued);
++}
++
++/**
++ * HCD Callback function for disconnect of the HCD.
++ *
++ * @param _p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_disconnect_cb( void *_p )
++{
++ gintsts_data_t intr;
++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_p);
++
++ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p);
++
++ /*
++ * Set status flags for the hub driver.
++ */
++ dwc_otg_hcd->flags.b.port_connect_status_change = 1;
++ dwc_otg_hcd->flags.b.port_connect_status = 0;
++
++ /*
++ * Shutdown any transfers in process by clearing the Tx FIFO Empty
++ * interrupt mask and status bits and disabling subsequent host
++ * channel interrupts.
++ */
++ intr.d32 = 0;
++ intr.b.nptxfempty = 1;
++ intr.b.ptxfempty = 1;
++ intr.b.hcintr = 1;
++ dwc_modify_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gintmsk, intr.d32, 0);
++ dwc_modify_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gintsts, intr.d32, 0);
++
++ del_timers(dwc_otg_hcd);
++
++ /*
++ * Turn off the vbus power only if the core has transitioned to device
++ * mode. If still in host mode, need to keep power on to detect a
++ * reconnection.
++ */
++ if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) {
++ if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) {
++ hprt0_data_t hprt0 = { .d32=0 };
++ DWC_PRINT("Disconnect: PortPower off\n");
++ hprt0.b.prtpwr = 0;
++ dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32);
++ }
++
++ dwc_otg_disable_host_interrupts( dwc_otg_hcd->core_if );
++ }
++
++ /* Respond with an error status to all URBs in the schedule. */
++ kill_all_urbs(dwc_otg_hcd);
++
++ if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) {
++ /* Clean up any host channels that were in use. */
++ int num_channels;
++ int i;
++ dwc_hc_t *channel;
++ dwc_otg_hc_regs_t *hc_regs;
++ hcchar_data_t hcchar;
++
++ num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
++
++ if (!dwc_otg_hcd->core_if->dma_enable) {
++ /* Flush out any channel requests in slave mode. */
++ for (i = 0; i < num_channels; i++) {
++ channel = dwc_otg_hcd->hc_ptr_array[i];
++ if (list_empty(&channel->hc_list_entry)) {
++ hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i];
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ if (hcchar.b.chen) {
++ hcchar.b.chen = 0;
++ hcchar.b.chdis = 1;
++ hcchar.b.epdir = 0;
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++ }
++ }
++ }
++ }
++
++ for (i = 0; i < num_channels; i++) {
++ channel = dwc_otg_hcd->hc_ptr_array[i];
++ if (list_empty(&channel->hc_list_entry)) {
++ hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i];
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ if (hcchar.b.chen) {
++ /* Halt the channel. */
++ hcchar.b.chdis = 1;
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++ }
++
++ dwc_otg_hc_cleanup(dwc_otg_hcd->core_if, channel);
++ list_add_tail(&channel->hc_list_entry,
++ &dwc_otg_hcd->free_hc_list);
++ }
++ }
++ }
++
++ /* A disconnect will end the session so the B-Device is no
++ * longer a B-host. */
++ ((struct usb_hcd *)_p)->self.is_b_host = 0;
++
++ return 1;
++}
++
++/**
++ * Connection timeout function. An OTG host is required to display a
++ * message if the device does not connect within 10 seconds.
++ */
++void dwc_otg_hcd_connect_timeout( unsigned long _ptr )
++{
++ DWC_DEBUGPL(DBG_HCDV, "%s(%x)\n", __func__, (int)_ptr);
++ DWC_PRINT( "Connect Timeout\n");
++ DWC_ERROR( "Device Not Connected/Responding\n" );
++}
++
++/**
++ * Start the connection timer. An OTG host is required to display a
++ * message if the device does not connect within 10 seconds. The
++ * timer is deleted if a port connect interrupt occurs before the
++ * timer expires.
++ */
++static void dwc_otg_hcd_start_connect_timer( dwc_otg_hcd_t *_hcd)
++{
++ init_timer( &_hcd->conn_timer );
++ _hcd->conn_timer.function = dwc_otg_hcd_connect_timeout;
++ _hcd->conn_timer.data = (unsigned long)0;
++ _hcd->conn_timer.expires = jiffies + (HZ*10);
++ add_timer( &_hcd->conn_timer );
++}
++
++/**
++ * HCD Callback function for disconnect of the HCD.
++ *
++ * @param _p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_session_start_cb( void *_p )
++{
++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_p);
++ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p);
++ dwc_otg_hcd_start_connect_timer( dwc_otg_hcd );
++ return 1;
++}
++
++/**
++ * HCD Callback structure for handling mode switching.
++ */
++static dwc_otg_cil_callbacks_t hcd_cil_callbacks = {
++ .start = dwc_otg_hcd_start_cb,
++ .stop = dwc_otg_hcd_stop_cb,
++ .disconnect = dwc_otg_hcd_disconnect_cb,
++ .session_start = dwc_otg_hcd_session_start_cb,
++ .p = 0,
++};
++
++
++/**
++ * Reset tasklet function
++ */
++static void reset_tasklet_func (unsigned long data)
++{
++ dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t*)data;
++ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++ hprt0_data_t hprt0;
++
++ DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n");
++
++ hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++ hprt0.b.prtrst = 1;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ mdelay (60);
++
++ hprt0.b.prtrst = 0;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ dwc_otg_hcd->flags.b.port_reset_change = 1;
++
++ return;
++}
++
++static struct tasklet_struct reset_tasklet = {
++ .next = NULL,
++ .state = 0,
++ .count = ATOMIC_INIT(0),
++ .func = reset_tasklet_func,
++ .data = 0,
++};
++
++/**
++ * Initializes the HCD. This function allocates memory for and initializes the
++ * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the
++ * USB bus with the core and calls the hc_driver->start() function. It returns
++ * a negative error on failure.
++ */
++int init_hcd_usecs(dwc_otg_hcd_t *_hcd);
++
++int __devinit dwc_otg_hcd_init(struct device *_dev, dwc_otg_device_t * dwc_otg_device)
++{
++ struct usb_hcd *hcd = NULL;
++ dwc_otg_hcd_t *dwc_otg_hcd = NULL;
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++
++ int num_channels;
++ int i;
++ dwc_hc_t *channel;
++
++ int retval = 0;
++
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT\n");
++
++ /*
++ * Allocate memory for the base HCD plus the DWC OTG HCD.
++ * Initialize the base HCD.
++ */
++ hcd = usb_create_hcd(&dwc_otg_hc_driver, _dev, dev_name(_dev));
++ if (hcd == NULL) {
++ retval = -ENOMEM;
++ goto error1;
++ }
++ dev_set_drvdata(_dev, dwc_otg_device); /* fscz restore */
++ hcd->regs = otg_dev->base;
++ hcd->rsrc_start = (int)otg_dev->base;
++
++ hcd->self.otg_port = 1;
++
++ /* Initialize the DWC OTG HCD. */
++ dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++ dwc_otg_hcd->core_if = otg_dev->core_if;
++ otg_dev->hcd = dwc_otg_hcd;
++
++ /* Register the HCD CIL Callbacks */
++ dwc_otg_cil_register_hcd_callbacks(otg_dev->core_if,
++ &hcd_cil_callbacks, hcd);
++
++ /* Initialize the non-periodic schedule. */
++ INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_inactive);
++ INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_active);
++ INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_deferred);
++
++ /* Initialize the periodic schedule. */
++ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_inactive);
++ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_ready);
++ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_assigned);
++ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_queued);
++
++ /*
++ * Create a host channel descriptor for each host channel implemented
++ * in the controller. Initialize the channel descriptor array.
++ */
++ INIT_LIST_HEAD(&dwc_otg_hcd->free_hc_list);
++ num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
++ for (i = 0; i < num_channels; i++) {
++ channel = kmalloc(sizeof(dwc_hc_t), GFP_KERNEL);
++ if (channel == NULL) {
++ retval = -ENOMEM;
++ DWC_ERROR("%s: host channel allocation failed\n", __func__);
++ goto error2;
++ }
++ memset(channel, 0, sizeof(dwc_hc_t));
++ channel->hc_num = i;
++ dwc_otg_hcd->hc_ptr_array[i] = channel;
++#ifdef DEBUG
++ init_timer(&dwc_otg_hcd->core_if->hc_xfer_timer[i]);
++#endif
++
++ DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i, channel);
++ }
++
++ /* Initialize the Connection timeout timer. */
++ init_timer( &dwc_otg_hcd->conn_timer );
++
++ /* Initialize reset tasklet. */
++ reset_tasklet.data = (unsigned long) dwc_otg_hcd;
++ dwc_otg_hcd->reset_tasklet = &reset_tasklet;
++
++ /* Set device flags indicating whether the HCD supports DMA. */
++ if (otg_dev->core_if->dma_enable) {
++ DWC_PRINT("Using DMA mode\n");
++ //_dev->dma_mask = (void *)~0;
++ //_dev->coherent_dma_mask = ~0;
++ _dev->dma_mask = &dma_mask;
++ _dev->coherent_dma_mask = DMA_BIT_MASK(32);
++ } else {
++ DWC_PRINT("Using Slave mode\n");
++ _dev->dma_mask = (void *)0;
++ _dev->coherent_dma_mask = 0;
++ }
++
++ init_hcd_usecs(dwc_otg_hcd);
++ /*
++ * Finish generic HCD initialization and start the HCD. This function
++ * allocates the DMA buffer pool, registers the USB bus, requests the
++ * IRQ line, and calls dwc_otg_hcd_start method.
++ */
++ retval = usb_add_hcd(hcd, otg_dev->irq, IRQF_SHARED);
++ if (retval < 0) {
++ goto error2;
++ }
++
++ /*
++ * Allocate space for storing data on status transactions. Normally no
++ * data is sent, but this space acts as a bit bucket. This must be
++ * done after usb_add_hcd since that function allocates the DMA buffer
++ * pool.
++ */
++ if (otg_dev->core_if->dma_enable) {
++ dwc_otg_hcd->status_buf =
++ dma_alloc_coherent(_dev,
++ DWC_OTG_HCD_STATUS_BUF_SIZE,
++ &dwc_otg_hcd->status_buf_dma,
++ GFP_KERNEL | GFP_DMA);
++ } else {
++ dwc_otg_hcd->status_buf = kmalloc(DWC_OTG_HCD_STATUS_BUF_SIZE,
++ GFP_KERNEL);
++ }
++ if (dwc_otg_hcd->status_buf == NULL) {
++ retval = -ENOMEM;
++ DWC_ERROR("%s: status_buf allocation failed\n", __func__);
++ goto error3;
++ }
++
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Initialized HCD, bus=%s, usbbus=%d\n",
++ dev_name(_dev), hcd->self.busnum);
++
++ return 0;
++
++ /* Error conditions */
++error3:
++ usb_remove_hcd(hcd);
++error2:
++ dwc_otg_hcd_free(hcd);
++ usb_put_hcd(hcd);
++error1:
++ return retval;
++}
++
++/**
++ * Removes the HCD.
++ * Frees memory and resources associated with the HCD and deregisters the bus.
++ */
++void dwc_otg_hcd_remove(struct device *_dev)
++{
++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
++ dwc_otg_hcd_t *dwc_otg_hcd = otg_dev->hcd;
++ struct usb_hcd *hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd);
++
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE\n");
++
++ /* Turn off all interrupts */
++ dwc_write_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0);
++ dwc_modify_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gahbcfg, 1, 0);
++
++ usb_remove_hcd(hcd);
++
++ dwc_otg_hcd_free(hcd);
++
++ usb_put_hcd(hcd);
++
++ return;
++}
++
++
++/* =========================================================================
++ * Linux HC Driver Functions
++ * ========================================================================= */
++
++/**
++ * Initializes dynamic portions of the DWC_otg HCD state.
++ */
++static void hcd_reinit(dwc_otg_hcd_t *_hcd)
++{
++ struct list_head *item;
++ int num_channels;
++ int i;
++ dwc_hc_t *channel;
++
++ _hcd->flags.d32 = 0;
++
++ _hcd->non_periodic_qh_ptr = &_hcd->non_periodic_sched_active;
++ _hcd->available_host_channels = _hcd->core_if->core_params->host_channels;
++
++ /*
++ * Put all channels in the free channel list and clean up channel
++ * states.
++ */
++ item = _hcd->free_hc_list.next;
++ while (item != &_hcd->free_hc_list) {
++ list_del(item);
++ item = _hcd->free_hc_list.next;
++ }
++ num_channels = _hcd->core_if->core_params->host_channels;
++ for (i = 0; i < num_channels; i++) {
++ channel = _hcd->hc_ptr_array[i];
++ list_add_tail(&channel->hc_list_entry, &_hcd->free_hc_list);
++ dwc_otg_hc_cleanup(_hcd->core_if, channel);
++ }
++
++ /* Initialize the DWC core for host mode operation. */
++ dwc_otg_core_host_init(_hcd->core_if);
++}
++
++/** Initializes the DWC_otg controller and its root hub and prepares it for host
++ * mode operation. Activates the root port. Returns 0 on success and a negative
++ * error code on failure. */
++int dwc_otg_hcd_start(struct usb_hcd *_hcd)
++{
++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
++ dwc_otg_core_if_t * core_if = dwc_otg_hcd->core_if;
++ struct usb_bus *bus;
++
++ // int retval;
++
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n");
++
++ bus = hcd_to_bus(_hcd);
++
++ /* Initialize the bus state. If the core is in Device Mode
++ * HALT the USB bus and return. */
++ if (dwc_otg_is_device_mode (core_if)) {
++ _hcd->state = HC_STATE_HALT;
++ return 0;
++ }
++ _hcd->state = HC_STATE_RUNNING;
++
++ /* Initialize and connect root hub if one is not already attached */
++ if (bus->root_hub) {
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n");
++ /* Inform the HUB driver to resume. */
++ usb_hcd_resume_root_hub(_hcd);
++ }
++ else {
++#if 0
++ struct usb_device *udev;
++ udev = usb_alloc_dev(NULL, bus, 0);
++ if (!udev) {
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error udev alloc\n");
++ return -ENODEV;
++ }
++ udev->speed = USB_SPEED_HIGH;
++ /* Not needed - VJ
++ if ((retval = usb_hcd_register_root_hub(udev, _hcd)) != 0) {
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error registering %d\n", retval);
++ return -ENODEV;
++ }
++ */
++#else
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error udev alloc\n");
++#endif
++ }
++
++ hcd_reinit(dwc_otg_hcd);
++
++ return 0;
++}
++
++static void qh_list_free(dwc_otg_hcd_t *_hcd, struct list_head *_qh_list)
++{
++ struct list_head *item;
++ dwc_otg_qh_t *qh;
++
++ if (_qh_list->next == NULL) {
++ /* The list hasn't been initialized yet. */
++ return;
++ }
++
++ /* Ensure there are no QTDs or URBs left. */
++ kill_urbs_in_qh_list(_hcd, _qh_list);
++
++ for (item = _qh_list->next; item != _qh_list; item = _qh_list->next) {
++ qh = list_entry(item, dwc_otg_qh_t, qh_list_entry);
++ dwc_otg_hcd_qh_remove_and_free(_hcd, qh);
++ }
++}
++
++/**
++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
++ * stopped.
++ */
++void dwc_otg_hcd_stop(struct usb_hcd *_hcd)
++{
++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
++ hprt0_data_t hprt0 = { .d32=0 };
++
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n");
++
++ /* Turn off all host-specific interrupts. */
++ dwc_otg_disable_host_interrupts( dwc_otg_hcd->core_if );
++
++ /*
++ * The root hub should be disconnected before this function is called.
++ * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue)
++ * and the QH lists (via ..._hcd_endpoint_disable).
++ */
++
++ /* Turn off the vbus power */
++ DWC_PRINT("PortPower off\n");
++ hprt0.b.prtpwr = 0;
++ dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32);
++
++ return;
++}
++
++
++/** Returns the current frame number. */
++int dwc_otg_hcd_get_frame_number(struct usb_hcd *_hcd)
++{
++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd);
++ hfnum_data_t hfnum;
++
++ hfnum.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if->
++ host_if->host_global_regs->hfnum);
++
++#ifdef DEBUG_SOF
++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n", hfnum.b.frnum);
++#endif
++ return hfnum.b.frnum;
++}
++
++/**
++ * Frees secondary storage associated with the dwc_otg_hcd structure contained
++ * in the struct usb_hcd field.
++ */
++void dwc_otg_hcd_free(struct usb_hcd *_hcd)
++{
++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd);
++ int i;
++
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n");
++
++ del_timers(dwc_otg_hcd);
++
++ /* Free memory for QH/QTD lists */
++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive);
++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_deferred);
++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active);
++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive);
++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready);
++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned);
++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued);
++
++ /* Free memory for the host channels. */
++ for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++ dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i];
++ if (hc != NULL) {
++ DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n", i, hc);
++ kfree(hc);
++ }
++ }
++
++ if (dwc_otg_hcd->core_if->dma_enable) {
++ if (dwc_otg_hcd->status_buf_dma) {
++ dma_free_coherent(_hcd->self.controller,
++ DWC_OTG_HCD_STATUS_BUF_SIZE,
++ dwc_otg_hcd->status_buf,
++ dwc_otg_hcd->status_buf_dma);
++ }
++ } else if (dwc_otg_hcd->status_buf != NULL) {
++ kfree(dwc_otg_hcd->status_buf);
++ }
++
++ return;
++}
++
++
++#ifdef DEBUG
++static void dump_urb_info(struct urb *_urb, char* _fn_name)
++{
++ DWC_PRINT("%s, urb %p\n", _fn_name, _urb);
++ DWC_PRINT(" Device address: %d\n", usb_pipedevice(_urb->pipe));
++ DWC_PRINT(" Endpoint: %d, %s\n", usb_pipeendpoint(_urb->pipe),
++ (usb_pipein(_urb->pipe) ? "IN" : "OUT"));
++ DWC_PRINT(" Endpoint type: %s\n",
++ ({char *pipetype;
++ switch (usb_pipetype(_urb->pipe)) {
++ case PIPE_CONTROL: pipetype = "CONTROL"; break;
++ case PIPE_BULK: pipetype = "BULK"; break;
++ case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
++ case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
++ default: pipetype = "UNKNOWN"; break;
++ }; pipetype;}));
++ DWC_PRINT(" Speed: %s\n",
++ ({char *speed;
++ switch (_urb->dev->speed) {
++ case USB_SPEED_HIGH: speed = "HIGH"; break;
++ case USB_SPEED_FULL: speed = "FULL"; break;
++ case USB_SPEED_LOW: speed = "LOW"; break;
++ default: speed = "UNKNOWN"; break;
++ }; speed;}));
++ DWC_PRINT(" Max packet size: %d\n",
++ usb_maxpacket(_urb->dev, _urb->pipe, usb_pipeout(_urb->pipe)));
++ DWC_PRINT(" Data buffer length: %d\n", _urb->transfer_buffer_length);
++ DWC_PRINT(" Transfer buffer: %p, Transfer DMA: %p\n",
++ _urb->transfer_buffer, (void *)_urb->transfer_dma);
++ DWC_PRINT(" Setup buffer: %p, Setup DMA: %p\n",
++ _urb->setup_packet, (void *)_urb->setup_dma);
++ DWC_PRINT(" Interval: %d\n", _urb->interval);
++ if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS) {
++ int i;
++ for (i = 0; i < _urb->number_of_packets; i++) {
++ DWC_PRINT(" ISO Desc %d:\n", i);
++ DWC_PRINT(" offset: %d, length %d\n",
++ _urb->iso_frame_desc[i].offset,
++ _urb->iso_frame_desc[i].length);
++ }
++ }
++}
++
++static void dump_channel_info(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *qh)
++{
++ if (qh->channel != NULL) {
++ dwc_hc_t *hc = qh->channel;
++ struct list_head *item;
++ dwc_otg_qh_t *qh_item;
++ int num_channels = _hcd->core_if->core_params->host_channels;
++ int i;
++
++ dwc_otg_hc_regs_t *hc_regs;
++ hcchar_data_t hcchar;
++ hcsplt_data_t hcsplt;
++ hctsiz_data_t hctsiz;
++ uint32_t hcdma;
++
++ hc_regs = _hcd->core_if->host_if->hc_regs[hc->hc_num];
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
++ hcdma = dwc_read_reg32(&hc_regs->hcdma);
++
++ DWC_PRINT(" Assigned to channel %p:\n", hc);
++ DWC_PRINT(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
++ DWC_PRINT(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
++ DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
++ hc->dev_addr, hc->ep_num, hc->ep_is_in);
++ DWC_PRINT(" ep_type: %d\n", hc->ep_type);
++ DWC_PRINT(" max_packet: %d\n", hc->max_packet);
++ DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start);
++ DWC_PRINT(" xfer_started: %d\n", hc->xfer_started);
++ DWC_PRINT(" halt_status: %d\n", hc->halt_status);
++ DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff);
++ DWC_PRINT(" xfer_len: %d\n", hc->xfer_len);
++ DWC_PRINT(" qh: %p\n", hc->qh);
++ DWC_PRINT(" NP inactive sched:\n");
++ list_for_each(item, &_hcd->non_periodic_sched_inactive) {
++ qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
++ DWC_PRINT(" %p\n", qh_item);
++ } DWC_PRINT(" NP active sched:\n");
++ list_for_each(item, &_hcd->non_periodic_sched_deferred) {
++ qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
++ DWC_PRINT(" %p\n", qh_item);
++ } DWC_PRINT(" NP deferred sched:\n");
++ list_for_each(item, &_hcd->non_periodic_sched_active) {
++ qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
++ DWC_PRINT(" %p\n", qh_item);
++ } DWC_PRINT(" Channels: \n");
++ for (i = 0; i < num_channels; i++) {
++ dwc_hc_t *hc = _hcd->hc_ptr_array[i];
++ DWC_PRINT(" %2d: %p\n", i, hc);
++ }
++ }
++}
++#endif // DEBUG
++
++/** Starts processing a USB transfer request specified by a USB Request Block
++ * (URB). mem_flags indicates the type of memory allocation to use while
++ * processing this URB. */
++int dwc_otg_hcd_urb_enqueue(struct usb_hcd *_hcd,
++ struct urb *_urb,
++ gfp_t _mem_flags)
++{
++ unsigned long flags;
++ int retval;
++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
++ dwc_otg_qtd_t *qtd;
++
++ local_irq_save(flags);
++ retval = usb_hcd_link_urb_to_ep(_hcd, _urb);
++ if (retval) {
++ local_irq_restore(flags);
++ return retval;
++ }
++#ifdef DEBUG
++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++ dump_urb_info(_urb, "dwc_otg_hcd_urb_enqueue");
++ }
++#endif // DEBUG
++ if (!dwc_otg_hcd->flags.b.port_connect_status) {
++ /* No longer connected. */
++ local_irq_restore(flags);
++ return -ENODEV;
++ }
++
++ qtd = dwc_otg_hcd_qtd_create (_urb);
++ if (qtd == NULL) {
++ local_irq_restore(flags);
++ DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n");
++ return -ENOMEM;
++ }
++
++ retval = dwc_otg_hcd_qtd_add (qtd, dwc_otg_hcd);
++ if (retval < 0) {
++ DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. "
++ "Error status %d\n", retval);
++ dwc_otg_hcd_qtd_free(qtd);
++ }
++
++ local_irq_restore (flags);
++ return retval;
++}
++
++/** Aborts/cancels a USB transfer request. Always returns 0 to indicate
++ * success. */
++int dwc_otg_hcd_urb_dequeue(struct usb_hcd *_hcd, struct urb *_urb, int _status)
++{
++ unsigned long flags;
++ dwc_otg_hcd_t *dwc_otg_hcd;
++ dwc_otg_qtd_t *urb_qtd;
++ dwc_otg_qh_t *qh;
++ int retval;
++ //struct usb_host_endpoint *_ep = NULL;
++
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n");
++
++ local_irq_save(flags);
++
++ retval = usb_hcd_check_unlink_urb(_hcd, _urb, _status);
++ if (retval) {
++ local_irq_restore(flags);
++ return retval;
++ }
++
++ dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd);
++ urb_qtd = (dwc_otg_qtd_t *)_urb->hcpriv;
++ if (urb_qtd == NULL) {
++ printk("urb_qtd is NULL for _urb %08x\n",(unsigned)_urb);
++ goto done;
++ }
++ qh = (dwc_otg_qh_t *) urb_qtd->qtd_qh_ptr;
++ if (qh == NULL) {
++ goto done;
++ }
++
++#ifdef DEBUG
++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++ dump_urb_info(_urb, "dwc_otg_hcd_urb_dequeue");
++ if (urb_qtd == qh->qtd_in_process) {
++ dump_channel_info(dwc_otg_hcd, qh);
++ }
++ }
++#endif // DEBUG
++
++ if (urb_qtd == qh->qtd_in_process) {
++ /* The QTD is in process (it has been assigned to a channel). */
++
++ if (dwc_otg_hcd->flags.b.port_connect_status) {
++ /*
++ * If still connected (i.e. in host mode), halt the
++ * channel so it can be used for other transfers. If
++ * no longer connected, the host registers can't be
++ * written to halt the channel since the core is in
++ * device mode.
++ */
++ dwc_otg_hc_halt(dwc_otg_hcd->core_if, qh->channel,
++ DWC_OTG_HC_XFER_URB_DEQUEUE);
++ }
++ }
++
++ /*
++ * Free the QTD and clean up the associated QH. Leave the QH in the
++ * schedule if it has any remaining QTDs.
++ */
++ dwc_otg_hcd_qtd_remove_and_free(urb_qtd);
++ if (urb_qtd == qh->qtd_in_process) {
++ dwc_otg_hcd_qh_deactivate(dwc_otg_hcd, qh, 0);
++ qh->channel = NULL;
++ qh->qtd_in_process = NULL;
++ } else if (list_empty(&qh->qtd_list)) {
++ dwc_otg_hcd_qh_remove(dwc_otg_hcd, qh);
++ }
++
++done:
++ local_irq_restore(flags);
++ _urb->hcpriv = NULL;
++
++ /* Higher layer software sets URB status. */
++ usb_hcd_unlink_urb_from_ep(_hcd, _urb);
++ usb_hcd_giveback_urb(_hcd, _urb, _status);
++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++ DWC_PRINT("Called usb_hcd_giveback_urb()\n");
++ DWC_PRINT(" urb->status = %d\n", _urb->status);
++ }
++
++ return 0;
++}
++
++
++/** Frees resources in the DWC_otg controller related to a given endpoint. Also
++ * clears state in the HCD related to the endpoint. Any URBs for the endpoint
++ * must already be dequeued. */
++void dwc_otg_hcd_endpoint_disable(struct usb_hcd *_hcd,
++ struct usb_host_endpoint *_ep)
++
++{
++ dwc_otg_qh_t *qh;
++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd);
++
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, "
++ "endpoint=%d\n", _ep->desc.bEndpointAddress,
++ dwc_ep_addr_to_endpoint(_ep->desc.bEndpointAddress));
++
++ qh = (dwc_otg_qh_t *)(_ep->hcpriv);
++ if (qh != NULL) {
++#ifdef DEBUG
++ /** Check that the QTD list is really empty */
++ if (!list_empty(&qh->qtd_list)) {
++ DWC_WARN("DWC OTG HCD EP DISABLE:"
++ " QTD List for this endpoint is not empty\n");
++ }
++#endif // DEBUG
++
++ dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh);
++ _ep->hcpriv = NULL;
++ }
++
++ return;
++}
++extern int dwc_irq;
++/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if
++ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
++ * interrupt.
++ *
++ * This function is called by the USB core when an interrupt occurs */
++irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *_hcd)
++{
++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
++
++ mask_and_ack_ifx_irq (dwc_irq);
++ return IRQ_RETVAL(dwc_otg_hcd_handle_intr(dwc_otg_hcd));
++}
++
++/** Creates Status Change bitmap for the root hub and root port. The bitmap is
++ * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
++ * is the status change indicator for the single root port. Returns 1 if either
++ * change indicator is 1, otherwise returns 0. */
++int dwc_otg_hcd_hub_status_data(struct usb_hcd *_hcd, char *_buf)
++{
++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
++
++ _buf[0] = 0;
++ _buf[0] |= (dwc_otg_hcd->flags.b.port_connect_status_change ||
++ dwc_otg_hcd->flags.b.port_reset_change ||
++ dwc_otg_hcd->flags.b.port_enable_change ||
++ dwc_otg_hcd->flags.b.port_suspend_change ||
++ dwc_otg_hcd->flags.b.port_over_current_change) << 1;
++
++#ifdef DEBUG
++ if (_buf[0]) {
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:"
++ " Root port status changed\n");
++ DWC_DEBUGPL(DBG_HCDV, " port_connect_status_change: %d\n",
++ dwc_otg_hcd->flags.b.port_connect_status_change);
++ DWC_DEBUGPL(DBG_HCDV, " port_reset_change: %d\n",
++ dwc_otg_hcd->flags.b.port_reset_change);
++ DWC_DEBUGPL(DBG_HCDV, " port_enable_change: %d\n",
++ dwc_otg_hcd->flags.b.port_enable_change);
++ DWC_DEBUGPL(DBG_HCDV, " port_suspend_change: %d\n",
++ dwc_otg_hcd->flags.b.port_suspend_change);
++ DWC_DEBUGPL(DBG_HCDV, " port_over_current_change: %d\n",
++ dwc_otg_hcd->flags.b.port_over_current_change);
++ }
++#endif // DEBUG
++ return (_buf[0] != 0);
++}
++
++#ifdef DWC_HS_ELECT_TST
++/*
++ * Quick and dirty hack to implement the HS Electrical Test
++ * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature.
++ *
++ * This code was copied from our userspace app "hset". It sends a
++ * Get Device Descriptor control sequence in two parts, first the
++ * Setup packet by itself, followed some time later by the In and
++ * Ack packets. Rather than trying to figure out how to add this
++ * functionality to the normal driver code, we just hijack the
++ * hardware, using these two function to drive the hardware
++ * directly.
++ */
++
++dwc_otg_core_global_regs_t *global_regs;
++dwc_otg_host_global_regs_t *hc_global_regs;
++dwc_otg_hc_regs_t *hc_regs;
++uint32_t *data_fifo;
++
++static void do_setup(void)
++{
++ gintsts_data_t gintsts;
++ hctsiz_data_t hctsiz;
++ hcchar_data_t hcchar;
++ haint_data_t haint;
++ hcint_data_t hcint;
++
++ /* Enable HAINTs */
++ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001);
++
++ /* Enable HCINTs */
++ dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3);
++
++ /* Read GINTSTS */
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ /* Read HAINT */
++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++ /* Read GINTSTS */
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ /*
++ * Send Setup packet (Get Device Descriptor)
++ */
++
++ /* Make sure channel is disabled */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ if (hcchar.b.chen) {
++ //fprintf(stderr, "Channel already enabled 1, HCCHAR = %08x\n", hcchar.d32);
++ hcchar.b.chdis = 1;
++ // hcchar.b.chen = 1;
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++ //sleep(1);
++ MDELAY(1000);
++
++ /* Read GINTSTS */
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ /* Read HAINT */
++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ //if (hcchar.b.chen) {
++ // fprintf(stderr, "** Channel _still_ enabled 1, HCCHAR = %08x **\n", hcchar.d32);
++ //}
++ }
++
++ /* Set HCTSIZ */
++ hctsiz.d32 = 0;
++ hctsiz.b.xfersize = 8;
++ hctsiz.b.pktcnt = 1;
++ hctsiz.b.pid = DWC_OTG_HC_PID_SETUP;
++ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++ /* Set HCCHAR */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++ hcchar.b.epdir = 0;
++ hcchar.b.epnum = 0;
++ hcchar.b.mps = 8;
++ hcchar.b.chen = 1;
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++ /* Fill FIFO with Setup data for Get Device Descriptor */
++ data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
++ dwc_write_reg32(data_fifo++, 0x01000680);
++ dwc_write_reg32(data_fifo++, 0x00080000);
++
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Wait for host channel interrupt */
++ do {
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ } while (gintsts.b.hcintr == 0);
++
++ //fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Disable HCINTs */
++ dwc_write_reg32(&hc_regs->hcintmsk, 0x0000);
++
++ /* Disable HAINTs */
++ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000);
++
++ /* Read HAINT */
++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++ /* Read GINTSTS */
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++}
++
++static void do_in_ack(void)
++{
++ gintsts_data_t gintsts;
++ hctsiz_data_t hctsiz;
++ hcchar_data_t hcchar;
++ haint_data_t haint;
++ hcint_data_t hcint;
++ host_grxsts_data_t grxsts;
++
++ /* Enable HAINTs */
++ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001);
++
++ /* Enable HCINTs */
++ dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3);
++
++ /* Read GINTSTS */
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ /* Read HAINT */
++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++ /* Read GINTSTS */
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ /*
++ * Receive Control In packet
++ */
++
++ /* Make sure channel is disabled */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ if (hcchar.b.chen) {
++ //fprintf(stderr, "Channel already enabled 2, HCCHAR = %08x\n", hcchar.d32);
++ hcchar.b.chdis = 1;
++ hcchar.b.chen = 1;
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++ //sleep(1);
++ MDELAY(1000);
++
++ /* Read GINTSTS */
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ /* Read HAINT */
++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ //if (hcchar.b.chen) {
++ // fprintf(stderr, "** Channel _still_ enabled 2, HCCHAR = %08x **\n", hcchar.d32);
++ //}
++ }
++
++ /* Set HCTSIZ */
++ hctsiz.d32 = 0;
++ hctsiz.b.xfersize = 8;
++ hctsiz.b.pktcnt = 1;
++ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
++ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++ /* Set HCCHAR */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++ hcchar.b.epdir = 1;
++ hcchar.b.epnum = 0;
++ hcchar.b.mps = 8;
++ hcchar.b.chen = 1;
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Wait for receive status queue interrupt */
++ do {
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ } while (gintsts.b.rxstsqlvl == 0);
++
++ //fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Read RXSTS */
++ grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp);
++ //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
++
++ /* Clear RXSTSQLVL in GINTSTS */
++ gintsts.d32 = 0;
++ gintsts.b.rxstsqlvl = 1;
++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++ switch (grxsts.b.pktsts) {
++ case DWC_GRXSTS_PKTSTS_IN:
++ /* Read the data into the host buffer */
++ if (grxsts.b.bcnt > 0) {
++ int i;
++ int word_count = (grxsts.b.bcnt + 3) / 4;
++
++ data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
++
++ for (i = 0; i < word_count; i++) {
++ (void)dwc_read_reg32(data_fifo++);
++ }
++ }
++
++ //fprintf(stderr, "Received %u bytes\n", (unsigned)grxsts.b.bcnt);
++ break;
++
++ default:
++ //fprintf(stderr, "** Unexpected GRXSTS packet status 1 **\n");
++ break;
++ }
++
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Wait for receive status queue interrupt */
++ do {
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ } while (gintsts.b.rxstsqlvl == 0);
++
++ //fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Read RXSTS */
++ grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp);
++ //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
++
++ /* Clear RXSTSQLVL in GINTSTS */
++ gintsts.d32 = 0;
++ gintsts.b.rxstsqlvl = 1;
++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++ switch (grxsts.b.pktsts) {
++ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
++ break;
++
++ default:
++ //fprintf(stderr, "** Unexpected GRXSTS packet status 2 **\n");
++ break;
++ }
++
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Wait for host channel interrupt */
++ do {
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ } while (gintsts.b.hcintr == 0);
++
++ //fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Read HAINT */
++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++ /* Read GINTSTS */
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ // usleep(100000);
++ // mdelay(100);
++ MDELAY(1);
++
++ /*
++ * Send handshake packet
++ */
++
++ /* Read HAINT */
++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++ /* Read GINTSTS */
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ /* Make sure channel is disabled */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ if (hcchar.b.chen) {
++ //fprintf(stderr, "Channel already enabled 3, HCCHAR = %08x\n", hcchar.d32);
++ hcchar.b.chdis = 1;
++ hcchar.b.chen = 1;
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++ //sleep(1);
++ MDELAY(1000);
++
++ /* Read GINTSTS */
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ /* Read HAINT */
++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ //if (hcchar.b.chen) {
++ // fprintf(stderr, "** Channel _still_ enabled 3, HCCHAR = %08x **\n", hcchar.d32);
++ //}
++ }
++
++ /* Set HCTSIZ */
++ hctsiz.d32 = 0;
++ hctsiz.b.xfersize = 0;
++ hctsiz.b.pktcnt = 1;
++ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
++ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
++
++ /* Set HCCHAR */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++ hcchar.b.epdir = 0;
++ hcchar.b.epnum = 0;
++ hcchar.b.mps = 8;
++ hcchar.b.chen = 1;
++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
++
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Wait for host channel interrupt */
++ do {
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ } while (gintsts.b.hcintr == 0);
++
++ //fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Disable HCINTs */
++ dwc_write_reg32(&hc_regs->hcintmsk, 0x0000);
++
++ /* Disable HAINTs */
++ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000);
++
++ /* Read HAINT */
++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
++
++ /* Read GINTSTS */
++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++}
++#endif /* DWC_HS_ELECT_TST */
++
++/** Handles hub class-specific requests.*/
++int dwc_otg_hcd_hub_control(struct usb_hcd *_hcd,
++ u16 _typeReq,
++ u16 _wValue,
++ u16 _wIndex,
++ char *_buf,
++ u16 _wLength)
++{
++ int retval = 0;
++
++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
++ dwc_otg_core_if_t *core_if = hcd_to_dwc_otg_hcd (_hcd)->core_if;
++ struct usb_hub_descriptor *desc;
++ hprt0_data_t hprt0 = {.d32 = 0};
++
++ uint32_t port_status;
++
++ switch (_typeReq) {
++ case ClearHubFeature:
++ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "ClearHubFeature 0x%x\n", _wValue);
++ switch (_wValue) {
++ case C_HUB_LOCAL_POWER:
++ case C_HUB_OVER_CURRENT:
++ /* Nothing required here */
++ break;
++ default:
++ retval = -EINVAL;
++ DWC_ERROR ("DWC OTG HCD - "
++ "ClearHubFeature request %xh unknown\n", _wValue);
++ }
++ break;
++ case ClearPortFeature:
++ if (!_wIndex || _wIndex > 1)
++ goto error;
++
++ switch (_wValue) {
++ case USB_PORT_FEAT_ENABLE:
++ DWC_DEBUGPL (DBG_ANY, "DWC OTG HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_ENABLE\n");
++ hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++ hprt0.b.prtena = 1;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ break;
++ case USB_PORT_FEAT_SUSPEND:
++ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
++ hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++ hprt0.b.prtres = 1;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ /* Clear Resume bit */
++ mdelay (100);
++ hprt0.b.prtres = 0;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ break;
++ case USB_PORT_FEAT_POWER:
++ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_POWER\n");
++ hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++ hprt0.b.prtpwr = 0;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ break;
++ case USB_PORT_FEAT_INDICATOR:
++ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
++ /* Port inidicator not supported */
++ break;
++ case USB_PORT_FEAT_C_CONNECTION:
++ /* Clears drivers internal connect status change
++ * flag */
++ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
++ dwc_otg_hcd->flags.b.port_connect_status_change = 0;
++ break;
++ case USB_PORT_FEAT_C_RESET:
++ /* Clears the driver's internal Port Reset Change
++ * flag */
++ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_C_RESET\n");
++ dwc_otg_hcd->flags.b.port_reset_change = 0;
++ break;
++ case USB_PORT_FEAT_C_ENABLE:
++ /* Clears the driver's internal Port
++ * Enable/Disable Change flag */
++ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
++ dwc_otg_hcd->flags.b.port_enable_change = 0;
++ break;
++ case USB_PORT_FEAT_C_SUSPEND:
++ /* Clears the driver's internal Port Suspend
++ * Change flag, which is set when resume signaling on
++ * the host port is complete */
++ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
++ dwc_otg_hcd->flags.b.port_suspend_change = 0;
++ break;
++ case USB_PORT_FEAT_C_OVER_CURRENT:
++ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
++ dwc_otg_hcd->flags.b.port_over_current_change = 0;
++ break;
++ default:
++ retval = -EINVAL;
++ DWC_ERROR ("DWC OTG HCD - "
++ "ClearPortFeature request %xh "
++ "unknown or unsupported\n", _wValue);
++ }
++ break;
++ case GetHubDescriptor:
++ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "GetHubDescriptor\n");
++ desc = (struct usb_hub_descriptor *)_buf;
++ desc->bDescLength = 9;
++ desc->bDescriptorType = 0x29;
++ desc->bNbrPorts = 1;
++ desc->wHubCharacteristics = 0x08;
++ desc->bPwrOn2PwrGood = 1;
++ desc->bHubContrCurrent = 0;
++ desc->u.hs.DeviceRemovable[0] = 0;
++ desc->u.hs.DeviceRemovable[1] = 0xff;
++ break;
++ case GetHubStatus:
++ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "GetHubStatus\n");
++ memset (_buf, 0, 4);
++ break;
++ case GetPortStatus:
++ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "GetPortStatus\n");
++
++ if (!_wIndex || _wIndex > 1)
++ goto error;
++
++ port_status = 0;
++
++ if (dwc_otg_hcd->flags.b.port_connect_status_change)
++ port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
++
++ if (dwc_otg_hcd->flags.b.port_enable_change)
++ port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
++
++ if (dwc_otg_hcd->flags.b.port_suspend_change)
++ port_status |= (1 << USB_PORT_FEAT_C_SUSPEND);
++
++ if (dwc_otg_hcd->flags.b.port_reset_change)
++ port_status |= (1 << USB_PORT_FEAT_C_RESET);
++
++ if (dwc_otg_hcd->flags.b.port_over_current_change) {
++ DWC_ERROR("Device Not Supported\n");
++ port_status |= (1 << USB_PORT_FEAT_C_OVER_CURRENT);
++ }
++
++ if (!dwc_otg_hcd->flags.b.port_connect_status) {
++ printk("DISCONNECTED PORT\n");
++ /*
++ * The port is disconnected, which means the core is
++ * either in device mode or it soon will be. Just
++ * return 0's for the remainder of the port status
++ * since the port register can't be read if the core
++ * is in device mode.
++ */
++#if 1 // winder.
++ *((u32 *) _buf) = cpu_to_le32(port_status);
++#else
++ *((__le32 *) _buf) = cpu_to_le32(port_status);
++#endif
++ break;
++ }
++
++ hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0);
++ DWC_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hprt0.d32);
++
++ if (hprt0.b.prtconnsts)
++ port_status |= (1 << USB_PORT_FEAT_CONNECTION);
++
++ if (hprt0.b.prtena)
++ port_status |= (1 << USB_PORT_FEAT_ENABLE);
++
++ if (hprt0.b.prtsusp)
++ port_status |= (1 << USB_PORT_FEAT_SUSPEND);
++
++ if (hprt0.b.prtovrcurract)
++ port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
++
++ if (hprt0.b.prtrst)
++ port_status |= (1 << USB_PORT_FEAT_RESET);
++
++ if (hprt0.b.prtpwr)
++ port_status |= (1 << USB_PORT_FEAT_POWER);
++
++ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED)
++ port_status |= USB_PORT_STAT_HIGH_SPEED;
++
++ else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED)
++ port_status |= (1 << USB_PORT_FEAT_LOWSPEED);
++
++ if (hprt0.b.prttstctl)
++ port_status |= (1 << USB_PORT_FEAT_TEST);
++
++ /* USB_PORT_FEAT_INDICATOR unsupported always 0 */
++#if 1 // winder.
++ *((u32 *) _buf) = cpu_to_le32(port_status);
++#else
++ *((__le32 *) _buf) = cpu_to_le32(port_status);
++#endif
++
++ break;
++ case SetHubFeature:
++ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "SetHubFeature\n");
++ /* No HUB features supported */
++ break;
++ case SetPortFeature:
++ if (_wValue != USB_PORT_FEAT_TEST && (!_wIndex || _wIndex > 1))
++ goto error;
++
++ if (!dwc_otg_hcd->flags.b.port_connect_status) {
++ /*
++ * The port is disconnected, which means the core is
++ * either in device mode or it soon will be. Just
++ * return without doing anything since the port
++ * register can't be written if the core is in device
++ * mode.
++ */
++ break;
++ }
++
++ switch (_wValue) {
++ case USB_PORT_FEAT_SUSPEND:
++ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
++ if (_hcd->self.otg_port == _wIndex
++ && _hcd->self.b_hnp_enable) {
++ gotgctl_data_t gotgctl = {.d32=0};
++ gotgctl.b.hstsethnpen = 1;
++ dwc_modify_reg32(&core_if->core_global_regs->
++ gotgctl, 0, gotgctl.d32);
++ core_if->op_state = A_SUSPEND;
++ }
++ hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++ hprt0.b.prtsusp = 1;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ //DWC_PRINT( "SUSPEND: HPRT0=%0x\n", hprt0.d32);
++ /* Suspend the Phy Clock */
++ {
++ pcgcctl_data_t pcgcctl = {.d32=0};
++ pcgcctl.b.stoppclk = 1;
++ dwc_write_reg32(core_if->pcgcctl, pcgcctl.d32);
++ }
++
++ /* For HNP the bus must be suspended for at least 200ms.*/
++ if (_hcd->self.b_hnp_enable) {
++ mdelay(200);
++ //DWC_PRINT( "SUSPEND: wait complete! (%d)\n", _hcd->state);
++ }
++ break;
++ case USB_PORT_FEAT_POWER:
++ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "SetPortFeature - USB_PORT_FEAT_POWER\n");
++ hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++ hprt0.b.prtpwr = 1;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ break;
++ case USB_PORT_FEAT_RESET:
++ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "SetPortFeature - USB_PORT_FEAT_RESET\n");
++ hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++ /* TODO: Is this for OTG protocol??
++ * We shoudl remove OTG totally for Danube system.
++ * But, in the future, maybe we need this.
++ */
++#if 1 // winder
++ hprt0.b.prtrst = 1;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++#else
++ /* When B-Host the Port reset bit is set in
++ * the Start HCD Callback function, so that
++ * the reset is started within 1ms of the HNP
++ * success interrupt. */
++ if (!_hcd->self.is_b_host) {
++ hprt0.b.prtrst = 1;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ }
++#endif
++ /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
++ MDELAY (60);
++ hprt0.b.prtrst = 0;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ break;
++
++#ifdef DWC_HS_ELECT_TST
++ case USB_PORT_FEAT_TEST:
++ {
++ uint32_t t;
++ gintmsk_data_t gintmsk;
++
++ t = (_wIndex >> 8); /* MSB wIndex USB */
++ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "SetPortFeature - USB_PORT_FEAT_TEST %d\n", t);
++ printk("USB_PORT_FEAT_TEST %d\n", t);
++ if (t < 6) {
++ hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++ hprt0.b.prttstctl = t;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ } else {
++ /* Setup global vars with reg addresses (quick and
++ * dirty hack, should be cleaned up)
++ */
++ global_regs = core_if->core_global_regs;
++ hc_global_regs = core_if->host_if->host_global_regs;
++ hc_regs = (dwc_otg_hc_regs_t *)((char *)global_regs + 0x500);
++ data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
++
++ if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */
++ /* Save current interrupt mask */
++ gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
++
++ /* Disable all interrupts while we muck with
++ * the hardware directly
++ */
++ dwc_write_reg32(&global_regs->gintmsk, 0);
++
++ /* 15 second delay per the test spec */
++ mdelay(15000);
++
++ /* Drive suspend on the root port */
++ hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++ hprt0.b.prtsusp = 1;
++ hprt0.b.prtres = 0;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++
++ /* 15 second delay per the test spec */
++ mdelay(15000);
++
++ /* Drive resume on the root port */
++ hprt0.d32 = dwc_otg_read_hprt0 (core_if);
++ hprt0.b.prtsusp = 0;
++ hprt0.b.prtres = 1;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++ mdelay(100);
++
++ /* Clear the resume bit */
++ hprt0.b.prtres = 0;
++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
++
++ /* Restore interrupts */
++ dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
++ } else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */
++ /* Save current interrupt mask */
++ gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
++
++ /* Disable all interrupts while we muck with
++ * the hardware directly
++ */
++ dwc_write_reg32(&global_regs->gintmsk, 0);
++
++ /* 15 second delay per the test spec */
++ mdelay(15000);
++
++ /* Send the Setup packet */
++ do_setup();
++
++ /* 15 second delay so nothing else happens for awhile */
++ mdelay(15000);
++
++ /* Restore interrupts */
++ dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
++ } else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */
++ /* Save current interrupt mask */
++ gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
++
++ /* Disable all interrupts while we muck with
++ * the hardware directly
++ */
++ dwc_write_reg32(&global_regs->gintmsk, 0);
++
++ /* Send the Setup packet */
++ do_setup();
++
++ /* 15 second delay so nothing else happens for awhile */
++ mdelay(15000);
++
++ /* Send the In and Ack packets */
++ do_in_ack();
++
++ /* 15 second delay so nothing else happens for awhile */
++ mdelay(15000);
++
++ /* Restore interrupts */
++ dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
++ }
++ }
++ break;
++ }
++#endif /* DWC_HS_ELECT_TST */
++
++ case USB_PORT_FEAT_INDICATOR:
++ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++ "SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
++ /* Not supported */
++ break;
++ default:
++ retval = -EINVAL;
++ DWC_ERROR ("DWC OTG HCD - "
++ "SetPortFeature request %xh "
++ "unknown or unsupported\n", _wValue);
++ break;
++ }
++ break;
++ default:
++error:
++ retval = -EINVAL;
++ DWC_WARN ("DWC OTG HCD - "
++ "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n",
++ _typeReq, _wIndex, _wValue);
++ break;
++ }
++
++ return retval;
++}
++
++
++/**
++ * Assigns transactions from a QTD to a free host channel and initializes the
++ * host channel to perform the transactions. The host channel is removed from
++ * the free list.
++ *
++ * @param _hcd The HCD state structure.
++ * @param _qh Transactions from the first QTD for this QH are selected and
++ * assigned to a free host channel.
++ */
++static void assign_and_init_hc(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
++{
++ dwc_hc_t *hc;
++ dwc_otg_qtd_t *qtd;
++ struct urb *urb;
++
++ DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p)\n", __func__, _hcd, _qh);
++
++ hc = list_entry(_hcd->free_hc_list.next, dwc_hc_t, hc_list_entry);
++
++ /* Remove the host channel from the free list. */
++ list_del_init(&hc->hc_list_entry);
++
++ qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
++ urb = qtd->urb;
++ _qh->channel = hc;
++ _qh->qtd_in_process = qtd;
++
++ /*
++ * Use usb_pipedevice to determine device address. This address is
++ * 0 before the SET_ADDRESS command and the correct address afterward.
++ */
++ hc->dev_addr = usb_pipedevice(urb->pipe);
++ hc->ep_num = usb_pipeendpoint(urb->pipe);
++
++ if (urb->dev->speed == USB_SPEED_LOW) {
++ hc->speed = DWC_OTG_EP_SPEED_LOW;
++ } else if (urb->dev->speed == USB_SPEED_FULL) {
++ hc->speed = DWC_OTG_EP_SPEED_FULL;
++ } else {
++ hc->speed = DWC_OTG_EP_SPEED_HIGH;
++ }
++ hc->max_packet = dwc_max_packet(_qh->maxp);
++
++ hc->xfer_started = 0;
++ hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS;
++ hc->error_state = (qtd->error_count > 0);
++ hc->halt_on_queue = 0;
++ hc->halt_pending = 0;
++ hc->requests = 0;
++
++ /*
++ * The following values may be modified in the transfer type section
++ * below. The xfer_len value may be reduced when the transfer is
++ * started to accommodate the max widths of the XferSize and PktCnt
++ * fields in the HCTSIZn register.
++ */
++ hc->do_ping = _qh->ping_state;
++ hc->ep_is_in = (usb_pipein(urb->pipe) != 0);
++ hc->data_pid_start = _qh->data_toggle;
++ hc->multi_count = 1;
++
++ if (_hcd->core_if->dma_enable) {
++ hc->xfer_buff = (uint8_t *)(u32)urb->transfer_dma + urb->actual_length;
++ } else {
++ hc->xfer_buff = (uint8_t *)urb->transfer_buffer + urb->actual_length;
++ }
++ hc->xfer_len = urb->transfer_buffer_length - urb->actual_length;
++ hc->xfer_count = 0;
++
++ /*
++ * Set the split attributes
++ */
++ hc->do_split = 0;
++ if (_qh->do_split) {
++ hc->do_split = 1;
++ hc->xact_pos = qtd->isoc_split_pos;
++ hc->complete_split = qtd->complete_split;
++ hc->hub_addr = urb->dev->tt->hub->devnum;
++ hc->port_addr = urb->dev->ttport;
++ }
++
++ switch (usb_pipetype(urb->pipe)) {
++ case PIPE_CONTROL:
++ hc->ep_type = DWC_OTG_EP_TYPE_CONTROL;
++ switch (qtd->control_phase) {
++ case DWC_OTG_CONTROL_SETUP:
++ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction\n");
++ hc->do_ping = 0;
++ hc->ep_is_in = 0;
++ hc->data_pid_start = DWC_OTG_HC_PID_SETUP;
++ if (_hcd->core_if->dma_enable) {
++ hc->xfer_buff = (uint8_t *)(u32)urb->setup_dma;
++ } else {
++ hc->xfer_buff = (uint8_t *)urb->setup_packet;
++ }
++ hc->xfer_len = 8;
++ break;
++ case DWC_OTG_CONTROL_DATA:
++ DWC_DEBUGPL(DBG_HCDV, " Control data transaction\n");
++ hc->data_pid_start = qtd->data_toggle;
++ break;
++ case DWC_OTG_CONTROL_STATUS:
++ /*
++ * Direction is opposite of data direction or IN if no
++ * data.
++ */
++ DWC_DEBUGPL(DBG_HCDV, " Control status transaction\n");
++ if (urb->transfer_buffer_length == 0) {
++ hc->ep_is_in = 1;
++ } else {
++ hc->ep_is_in = (usb_pipein(urb->pipe) != USB_DIR_IN);
++ }
++ if (hc->ep_is_in) {
++ hc->do_ping = 0;
++ }
++ hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
++ hc->xfer_len = 0;
++ if (_hcd->core_if->dma_enable) {
++ hc->xfer_buff = (uint8_t *)_hcd->status_buf_dma;
++ } else {
++ hc->xfer_buff = (uint8_t *)_hcd->status_buf;
++ }
++ break;
++ }
++ break;
++ case PIPE_BULK:
++ hc->ep_type = DWC_OTG_EP_TYPE_BULK;
++ break;
++ case PIPE_INTERRUPT:
++ hc->ep_type = DWC_OTG_EP_TYPE_INTR;
++ break;
++ case PIPE_ISOCHRONOUS:
++ {
++ struct usb_iso_packet_descriptor *frame_desc;
++ frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index];
++ hc->ep_type = DWC_OTG_EP_TYPE_ISOC;
++ if (_hcd->core_if->dma_enable) {
++ hc->xfer_buff = (uint8_t *)(u32)urb->transfer_dma;
++ } else {
++ hc->xfer_buff = (uint8_t *)urb->transfer_buffer;
++ }
++ hc->xfer_buff += frame_desc->offset + qtd->isoc_split_offset;
++ hc->xfer_len = frame_desc->length - qtd->isoc_split_offset;
++
++ if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) {
++ if (hc->xfer_len <= 188) {
++ hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL;
++ }
++ else {
++ hc->xact_pos = DWC_HCSPLIT_XACTPOS_BEGIN;
++ }
++ }
++ }
++ break;
++ }
++
++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++ /*
++ * This value may be modified when the transfer is started to
++ * reflect the actual transfer length.
++ */
++ hc->multi_count = dwc_hb_mult(_qh->maxp);
++ }
++
++ dwc_otg_hc_init(_hcd->core_if, hc);
++ hc->qh = _qh;
++}
++#define DEBUG_HOST_CHANNELS
++#ifdef DEBUG_HOST_CHANNELS
++static int last_sel_trans_num_per_scheduled = 0;
++module_param(last_sel_trans_num_per_scheduled, int, 0444);
++
++static int last_sel_trans_num_nonper_scheduled = 0;
++module_param(last_sel_trans_num_nonper_scheduled, int, 0444);
++
++static int last_sel_trans_num_avail_hc_at_start = 0;
++module_param(last_sel_trans_num_avail_hc_at_start, int, 0444);
++
++static int last_sel_trans_num_avail_hc_at_end = 0;
++module_param(last_sel_trans_num_avail_hc_at_end, int, 0444);
++#endif /* DEBUG_HOST_CHANNELS */
++
++/**
++ * This function selects transactions from the HCD transfer schedule and
++ * assigns them to available host channels. It is called from HCD interrupt
++ * handler functions.
++ *
++ * @param _hcd The HCD state structure.
++ *
++ * @return The types of new transactions that were assigned to host channels.
++ */
++dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *_hcd)
++{
++ struct list_head *qh_ptr;
++ dwc_otg_qh_t *qh;
++ int num_channels;
++ unsigned long flags;
++ dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE;
++
++#ifdef DEBUG_SOF
++ DWC_DEBUGPL(DBG_HCD, " Select Transactions\n");
++#endif /* */
++
++#ifdef DEBUG_HOST_CHANNELS
++ last_sel_trans_num_per_scheduled = 0;
++ last_sel_trans_num_nonper_scheduled = 0;
++ last_sel_trans_num_avail_hc_at_start = _hcd->available_host_channels;
++#endif /* DEBUG_HOST_CHANNELS */
++
++ /* Process entries in the periodic ready list. */
++ num_channels = _hcd->core_if->core_params->host_channels;
++ qh_ptr = _hcd->periodic_sched_ready.next;
++ while (qh_ptr != &_hcd->periodic_sched_ready
++ && !list_empty(&_hcd->free_hc_list)) {
++
++ // Make sure we leave one channel for non periodic transactions.
++ local_irq_save(flags);
++ if (_hcd->available_host_channels <= 1) {
++ local_irq_restore(flags);
++ break;
++ }
++ _hcd->available_host_channels--;
++ local_irq_restore(flags);
++#ifdef DEBUG_HOST_CHANNELS
++ last_sel_trans_num_per_scheduled++;
++#endif /* DEBUG_HOST_CHANNELS */
++
++ qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++ assign_and_init_hc(_hcd, qh);
++
++ /*
++ * Move the QH from the periodic ready schedule to the
++ * periodic assigned schedule.
++ */
++ qh_ptr = qh_ptr->next;
++ local_irq_save(flags);
++ list_move(&qh->qh_list_entry, &_hcd->periodic_sched_assigned);
++ local_irq_restore(flags);
++ ret_val = DWC_OTG_TRANSACTION_PERIODIC;
++ }
++
++ /*
++ * Process entries in the deferred portion of the non-periodic list.
++ * A NAK put them here and, at the right time, they need to be
++ * placed on the sched_inactive list.
++ */
++ qh_ptr = _hcd->non_periodic_sched_deferred.next;
++ while (qh_ptr != &_hcd->non_periodic_sched_deferred) {
++ uint16_t frame_number =
++ dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(_hcd));
++ qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++ qh_ptr = qh_ptr->next;
++
++ if (dwc_frame_num_le(qh->sched_frame, frame_number)) {
++ // NAK did this
++ /*
++ * Move the QH from the non periodic deferred schedule to
++ * the non periodic inactive schedule.
++ */
++ local_irq_save(flags);
++ list_move(&qh->qh_list_entry,
++ &_hcd->non_periodic_sched_inactive);
++ local_irq_restore(flags);
++ }
++ }
++
++ /*
++ * Process entries in the inactive portion of the non-periodic
++ * schedule. Some free host channels may not be used if they are
++ * reserved for periodic transfers.
++ */
++ qh_ptr = _hcd->non_periodic_sched_inactive.next;
++ num_channels = _hcd->core_if->core_params->host_channels;
++ while (qh_ptr != &_hcd->non_periodic_sched_inactive
++ && !list_empty(&_hcd->free_hc_list)) {
++
++ local_irq_save(flags);
++ if (_hcd->available_host_channels < 1) {
++ local_irq_restore(flags);
++ break;
++ }
++ _hcd->available_host_channels--;
++ local_irq_restore(flags);
++#ifdef DEBUG_HOST_CHANNELS
++ last_sel_trans_num_nonper_scheduled++;
++#endif /* DEBUG_HOST_CHANNELS */
++
++ qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++ assign_and_init_hc(_hcd, qh);
++
++ /*
++ * Move the QH from the non-periodic inactive schedule to the
++ * non-periodic active schedule.
++ */
++ qh_ptr = qh_ptr->next;
++ local_irq_save(flags);
++ list_move(&qh->qh_list_entry, &_hcd->non_periodic_sched_active);
++ local_irq_restore(flags);
++
++ if (ret_val == DWC_OTG_TRANSACTION_NONE) {
++ ret_val = DWC_OTG_TRANSACTION_NON_PERIODIC;
++ } else {
++ ret_val = DWC_OTG_TRANSACTION_ALL;
++ }
++
++ }
++#ifdef DEBUG_HOST_CHANNELS
++ last_sel_trans_num_avail_hc_at_end = _hcd->available_host_channels;
++#endif /* DEBUG_HOST_CHANNELS */
++
++ return ret_val;
++}
++
++/**
++ * Attempts to queue a single transaction request for a host channel
++ * associated with either a periodic or non-periodic transfer. This function
++ * assumes that there is space available in the appropriate request queue. For
++ * an OUT transfer or SETUP transaction in Slave mode, it checks whether space
++ * is available in the appropriate Tx FIFO.
++ *
++ * @param _hcd The HCD state structure.
++ * @param _hc Host channel descriptor associated with either a periodic or
++ * non-periodic transfer.
++ * @param _fifo_dwords_avail Number of DWORDs available in the periodic Tx
++ * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic
++ * transfers.
++ *
++ * @return 1 if a request is queued and more requests may be needed to
++ * complete the transfer, 0 if no more requests are required for this
++ * transfer, -1 if there is insufficient space in the Tx FIFO.
++ */
++static int queue_transaction(dwc_otg_hcd_t *_hcd,
++ dwc_hc_t *_hc,
++ uint16_t _fifo_dwords_avail)
++{
++ int retval;
++
++ if (_hcd->core_if->dma_enable) {
++ if (!_hc->xfer_started) {
++ dwc_otg_hc_start_transfer(_hcd->core_if, _hc);
++ _hc->qh->ping_state = 0;
++ }
++ retval = 0;
++ } else if (_hc->halt_pending) {
++ /* Don't queue a request if the channel has been halted. */
++ retval = 0;
++ } else if (_hc->halt_on_queue) {
++ dwc_otg_hc_halt(_hcd->core_if, _hc, _hc->halt_status);
++ retval = 0;
++ } else if (_hc->do_ping) {
++ if (!_hc->xfer_started) {
++ dwc_otg_hc_start_transfer(_hcd->core_if, _hc);
++ }
++ retval = 0;
++ } else if (!_hc->ep_is_in ||
++ _hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
++ if ((_fifo_dwords_avail * 4) >= _hc->max_packet) {
++ if (!_hc->xfer_started) {
++ dwc_otg_hc_start_transfer(_hcd->core_if, _hc);
++ retval = 1;
++ } else {
++ retval = dwc_otg_hc_continue_transfer(_hcd->core_if, _hc);
++ }
++ } else {
++ retval = -1;
++ }
++ } else {
++ if (!_hc->xfer_started) {
++ dwc_otg_hc_start_transfer(_hcd->core_if, _hc);
++ retval = 1;
++ } else {
++ retval = dwc_otg_hc_continue_transfer(_hcd->core_if, _hc);
++ }
++ }
++
++ return retval;
++}
++
++/**
++ * Processes active non-periodic channels and queues transactions for these
++ * channels to the DWC_otg controller. After queueing transactions, the NP Tx
++ * FIFO Empty interrupt is enabled if there are more transactions to queue as
++ * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx
++ * FIFO Empty interrupt is disabled.
++ */
++static void process_non_periodic_channels(dwc_otg_hcd_t *_hcd)
++{
++ gnptxsts_data_t tx_status;
++ struct list_head *orig_qh_ptr;
++ dwc_otg_qh_t *qh;
++ int status;
++ int no_queue_space = 0;
++ int no_fifo_space = 0;
++ int more_to_do = 0;
++
++ dwc_otg_core_global_regs_t *global_regs = _hcd->core_if->core_global_regs;
++
++ DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n");
++#ifdef DEBUG
++ tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++ DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (before queue): %d\n",
++ tx_status.b.nptxqspcavail);
++ DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (before queue): %d\n",
++ tx_status.b.nptxfspcavail);
++#endif
++ /*
++ * Keep track of the starting point. Skip over the start-of-list
++ * entry.
++ */
++ if (_hcd->non_periodic_qh_ptr == &_hcd->non_periodic_sched_active) {
++ _hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next;
++ }
++ orig_qh_ptr = _hcd->non_periodic_qh_ptr;
++
++ /*
++ * Process once through the active list or until no more space is
++ * available in the request queue or the Tx FIFO.
++ */
++ do {
++ tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++ if (!_hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) {
++ no_queue_space = 1;
++ break;
++ }
++
++ qh = list_entry(_hcd->non_periodic_qh_ptr, dwc_otg_qh_t, qh_list_entry);
++ status = queue_transaction(_hcd, qh->channel, tx_status.b.nptxfspcavail);
++
++ if (status > 0) {
++ more_to_do = 1;
++ } else if (status < 0) {
++ no_fifo_space = 1;
++ break;
++ }
++
++ /* Advance to next QH, skipping start-of-list entry. */
++ _hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next;
++ if (_hcd->non_periodic_qh_ptr == &_hcd->non_periodic_sched_active) {
++ _hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next;
++ }
++
++ } while (_hcd->non_periodic_qh_ptr != orig_qh_ptr);
++
++ if (!_hcd->core_if->dma_enable) {
++ gintmsk_data_t intr_mask = {.d32 = 0};
++ intr_mask.b.nptxfempty = 1;
++
++#ifdef DEBUG
++ tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
++ DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (after queue): %d\n",
++ tx_status.b.nptxqspcavail);
++ DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (after queue): %d\n",
++ tx_status.b.nptxfspcavail);
++#endif
++ if (more_to_do || no_queue_space || no_fifo_space) {
++ /*
++ * May need to queue more transactions as the request
++ * queue or Tx FIFO empties. Enable the non-periodic
++ * Tx FIFO empty interrupt. (Always use the half-empty
++ * level to ensure that new requests are loaded as
++ * soon as possible.)
++ */
++ dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
++ } else {
++ /*
++ * Disable the Tx FIFO empty interrupt since there are
++ * no more transactions that need to be queued right
++ * now. This function is called from interrupt
++ * handlers to queue more transactions as transfer
++ * states change.
++ */
++ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
++ }
++ }
++}
++
++/**
++ * Processes periodic channels for the next frame and queues transactions for
++ * these channels to the DWC_otg controller. After queueing transactions, the
++ * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions
++ * to queue as Periodic Tx FIFO or request queue space becomes available.
++ * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled.
++ */
++static void process_periodic_channels(dwc_otg_hcd_t *_hcd)
++{
++ hptxsts_data_t tx_status;
++ struct list_head *qh_ptr;
++ dwc_otg_qh_t *qh;
++ int status;
++ int no_queue_space = 0;
++ int no_fifo_space = 0;
++
++ dwc_otg_host_global_regs_t *host_regs;
++ host_regs = _hcd->core_if->host_if->host_global_regs;
++
++ DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n");
++#ifdef DEBUG
++ tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
++ DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (before queue): %d\n",
++ tx_status.b.ptxqspcavail);
++ DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (before queue): %d\n",
++ tx_status.b.ptxfspcavail);
++#endif
++
++ qh_ptr = _hcd->periodic_sched_assigned.next;
++ while (qh_ptr != &_hcd->periodic_sched_assigned) {
++ tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
++ if (tx_status.b.ptxqspcavail == 0) {
++ no_queue_space = 1;
++ break;
++ }
++
++ qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++
++ /*
++ * Set a flag if we're queuing high-bandwidth in slave mode.
++ * The flag prevents any halts to get into the request queue in
++ * the middle of multiple high-bandwidth packets getting queued.
++ */
++ if ((!_hcd->core_if->dma_enable) &&
++ (qh->channel->multi_count > 1))
++ {
++ _hcd->core_if->queuing_high_bandwidth = 1;
++ }
++
++ status = queue_transaction(_hcd, qh->channel, tx_status.b.ptxfspcavail);
++ if (status < 0) {
++ no_fifo_space = 1;
++ break;
++ }
++
++ /*
++ * In Slave mode, stay on the current transfer until there is
++ * nothing more to do or the high-bandwidth request count is
++ * reached. In DMA mode, only need to queue one request. The
++ * controller automatically handles multiple packets for
++ * high-bandwidth transfers.
++ */
++ if (_hcd->core_if->dma_enable ||
++ (status == 0 ||
++ qh->channel->requests == qh->channel->multi_count)) {
++ qh_ptr = qh_ptr->next;
++ /*
++ * Move the QH from the periodic assigned schedule to
++ * the periodic queued schedule.
++ */
++ list_move(&qh->qh_list_entry, &_hcd->periodic_sched_queued);
++
++ /* done queuing high bandwidth */
++ _hcd->core_if->queuing_high_bandwidth = 0;
++ }
++ }
++
++ if (!_hcd->core_if->dma_enable) {
++ dwc_otg_core_global_regs_t *global_regs;
++ gintmsk_data_t intr_mask = {.d32 = 0};
++
++ global_regs = _hcd->core_if->core_global_regs;
++ intr_mask.b.ptxfempty = 1;
++#ifdef DEBUG
++ tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
++ DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (after queue): %d\n",
++ tx_status.b.ptxqspcavail);
++ DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (after queue): %d\n",
++ tx_status.b.ptxfspcavail);
++#endif
++ if (!(list_empty(&_hcd->periodic_sched_assigned)) ||
++ no_queue_space || no_fifo_space) {
++ /*
++ * May need to queue more transactions as the request
++ * queue or Tx FIFO empties. Enable the periodic Tx
++ * FIFO empty interrupt. (Always use the half-empty
++ * level to ensure that new requests are loaded as
++ * soon as possible.)
++ */
++ dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
++ } else {
++ /*
++ * Disable the Tx FIFO empty interrupt since there are
++ * no more transactions that need to be queued right
++ * now. This function is called from interrupt
++ * handlers to queue more transactions as transfer
++ * states change.
++ */
++ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
++ }
++ }
++}
++
++/**
++ * This function processes the currently active host channels and queues
++ * transactions for these channels to the DWC_otg controller. It is called
++ * from HCD interrupt handler functions.
++ *
++ * @param _hcd The HCD state structure.
++ * @param _tr_type The type(s) of transactions to queue (non-periodic,
++ * periodic, or both).
++ */
++void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *_hcd,
++ dwc_otg_transaction_type_e _tr_type)
++{
++#ifdef DEBUG_SOF
++ DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n");
++#endif
++ /* Process host channels associated with periodic transfers. */
++ if ((_tr_type == DWC_OTG_TRANSACTION_PERIODIC ||
++ _tr_type == DWC_OTG_TRANSACTION_ALL) &&
++ !list_empty(&_hcd->periodic_sched_assigned)) {
++
++ process_periodic_channels(_hcd);
++ }
++
++ /* Process host channels associated with non-periodic transfers. */
++ if ((_tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC ||
++ _tr_type == DWC_OTG_TRANSACTION_ALL)) {
++ if (!list_empty(&_hcd->non_periodic_sched_active)) {
++ process_non_periodic_channels(_hcd);
++ } else {
++ /*
++ * Ensure NP Tx FIFO empty interrupt is disabled when
++ * there are no non-periodic transfers to process.
++ */
++ gintmsk_data_t gintmsk = {.d32 = 0};
++ gintmsk.b.nptxfempty = 1;
++ dwc_modify_reg32(&_hcd->core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
++ }
++ }
++}
++
++/**
++ * Sets the final status of an URB and returns it to the device driver. Any
++ * required cleanup of the URB is performed.
++ */
++void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t * _hcd, struct urb *_urb,
++ int _status)
++ __releases(_hcd->lock)
++__acquires(_hcd->lock)
++{
++#ifdef DEBUG
++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++ DWC_PRINT("%s: urb %p, device %d, ep %d %s, status=%d\n",
++ __func__, _urb, usb_pipedevice(_urb->pipe),
++ usb_pipeendpoint(_urb->pipe),
++ usb_pipein(_urb->pipe) ? "IN" : "OUT", _status);
++ if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS) {
++ int i;
++ for (i = 0; i < _urb->number_of_packets; i++) {
++ DWC_PRINT(" ISO Desc %d status: %d\n",
++ i, _urb->iso_frame_desc[i].status);
++ }
++ }
++ }
++#endif
++
++ _urb->status = _status;
++ _urb->hcpriv = NULL;
++ usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(_hcd), _urb);
++ spin_unlock(&_hcd->lock);
++ usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(_hcd), _urb, _status);
++ spin_lock(&_hcd->lock);
++}
++
++/*
++ * Returns the Queue Head for an URB.
++ */
++dwc_otg_qh_t *dwc_urb_to_qh(struct urb *_urb)
++{
++ struct usb_host_endpoint *ep = dwc_urb_to_endpoint(_urb);
++ return (dwc_otg_qh_t *)ep->hcpriv;
++}
++
++#ifdef DEBUG
++void dwc_print_setup_data (uint8_t *setup)
++{
++ int i;
++ if (CHK_DEBUG_LEVEL(DBG_HCD)){
++ DWC_PRINT("Setup Data = MSB ");
++ for (i=7; i>=0; i--) DWC_PRINT ("%02x ", setup[i]);
++ DWC_PRINT("\n");
++ DWC_PRINT(" bmRequestType Tranfer = %s\n", (setup[0]&0x80) ? "Device-to-Host" : "Host-to-Device");
++ DWC_PRINT(" bmRequestType Type = ");
++ switch ((setup[0]&0x60) >> 5) {
++ case 0: DWC_PRINT("Standard\n"); break;
++ case 1: DWC_PRINT("Class\n"); break;
++ case 2: DWC_PRINT("Vendor\n"); break;
++ case 3: DWC_PRINT("Reserved\n"); break;
++ }
++ DWC_PRINT(" bmRequestType Recipient = ");
++ switch (setup[0]&0x1f) {
++ case 0: DWC_PRINT("Device\n"); break;
++ case 1: DWC_PRINT("Interface\n"); break;
++ case 2: DWC_PRINT("Endpoint\n"); break;
++ case 3: DWC_PRINT("Other\n"); break;
++ default: DWC_PRINT("Reserved\n"); break;
++ }
++ DWC_PRINT(" bRequest = 0x%0x\n", setup[1]);
++ DWC_PRINT(" wValue = 0x%0x\n", *((uint16_t *)&setup[2]));
++ DWC_PRINT(" wIndex = 0x%0x\n", *((uint16_t *)&setup[4]));
++ DWC_PRINT(" wLength = 0x%0x\n\n", *((uint16_t *)&setup[6]));
++ }
++}
++#endif
++
++void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *_hcd) {
++#ifdef DEBUG
++#if 0
++ DWC_PRINT("Frame remaining at SOF:\n");
++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
++ _hcd->frrem_samples, _hcd->frrem_accum,
++ (_hcd->frrem_samples > 0) ?
++ _hcd->frrem_accum/_hcd->frrem_samples : 0);
++
++ DWC_PRINT("\n");
++ DWC_PRINT("Frame remaining at start_transfer (uframe 7):\n");
++ DWC_PRINT(" samples %u, accum %u, avg %u\n",
++ _hcd->core_if->hfnum_7_samples, _hcd->core_if->hfnum_7_frrem_accum,
++ (_hcd->core_if->hfnum_7_samples > 0) ?
++ _hcd->core_if->hfnum_7_frrem_accum/_hcd->core_if->hfnum_7_samples : 0);
++ DWC_PRINT("Frame remaining at start_transfer (uframe 0):\n");
++ DWC_PRINT(" samples %u, accum %u, avg %u\n",
++ _hcd->core_if->hfnum_0_samples, _hcd->core_if->hfnum_0_frrem_accum,
++ (_hcd->core_if->hfnum_0_samples > 0) ?
++ _hcd->core_if->hfnum_0_frrem_accum/_hcd->core_if->hfnum_0_samples : 0);
++ DWC_PRINT("Frame remaining at start_transfer (uframe 1-6):\n");
++ DWC_PRINT(" samples %u, accum %u, avg %u\n",
++ _hcd->core_if->hfnum_other_samples, _hcd->core_if->hfnum_other_frrem_accum,
++ (_hcd->core_if->hfnum_other_samples > 0) ?
++ _hcd->core_if->hfnum_other_frrem_accum/_hcd->core_if->hfnum_other_samples : 0);
++
++ DWC_PRINT("\n");
++ DWC_PRINT("Frame remaining at sample point A (uframe 7):\n");
++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
++ _hcd->hfnum_7_samples_a, _hcd->hfnum_7_frrem_accum_a,
++ (_hcd->hfnum_7_samples_a > 0) ?
++ _hcd->hfnum_7_frrem_accum_a/_hcd->hfnum_7_samples_a : 0);
++ DWC_PRINT("Frame remaining at sample point A (uframe 0):\n");
++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
++ _hcd->hfnum_0_samples_a, _hcd->hfnum_0_frrem_accum_a,
++ (_hcd->hfnum_0_samples_a > 0) ?
++ _hcd->hfnum_0_frrem_accum_a/_hcd->hfnum_0_samples_a : 0);
++ DWC_PRINT("Frame remaining at sample point A (uframe 1-6):\n");
++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
++ _hcd->hfnum_other_samples_a, _hcd->hfnum_other_frrem_accum_a,
++ (_hcd->hfnum_other_samples_a > 0) ?
++ _hcd->hfnum_other_frrem_accum_a/_hcd->hfnum_other_samples_a : 0);
++
++ DWC_PRINT("\n");
++ DWC_PRINT("Frame remaining at sample point B (uframe 7):\n");
++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
++ _hcd->hfnum_7_samples_b, _hcd->hfnum_7_frrem_accum_b,
++ (_hcd->hfnum_7_samples_b > 0) ?
++ _hcd->hfnum_7_frrem_accum_b/_hcd->hfnum_7_samples_b : 0);
++ DWC_PRINT("Frame remaining at sample point B (uframe 0):\n");
++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
++ _hcd->hfnum_0_samples_b, _hcd->hfnum_0_frrem_accum_b,
++ (_hcd->hfnum_0_samples_b > 0) ?
++ _hcd->hfnum_0_frrem_accum_b/_hcd->hfnum_0_samples_b : 0);
++ DWC_PRINT("Frame remaining at sample point B (uframe 1-6):\n");
++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
++ _hcd->hfnum_other_samples_b, _hcd->hfnum_other_frrem_accum_b,
++ (_hcd->hfnum_other_samples_b > 0) ?
++ _hcd->hfnum_other_frrem_accum_b/_hcd->hfnum_other_samples_b : 0);
++#endif
++#endif
++}
++
++void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *_hcd)
++{
++#ifdef DEBUG
++ int num_channels;
++ int i;
++ gnptxsts_data_t np_tx_status;
++ hptxsts_data_t p_tx_status;
++
++ num_channels = _hcd->core_if->core_params->host_channels;
++ DWC_PRINT("\n");
++ DWC_PRINT("************************************************************\n");
++ DWC_PRINT("HCD State:\n");
++ DWC_PRINT(" Num channels: %d\n", num_channels);
++ for (i = 0; i < num_channels; i++) {
++ dwc_hc_t *hc = _hcd->hc_ptr_array[i];
++ DWC_PRINT(" Channel %d:\n", i);
++ DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
++ hc->dev_addr, hc->ep_num, hc->ep_is_in);
++ DWC_PRINT(" speed: %d\n", hc->speed);
++ DWC_PRINT(" ep_type: %d\n", hc->ep_type);
++ DWC_PRINT(" max_packet: %d\n", hc->max_packet);
++ DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start);
++ DWC_PRINT(" multi_count: %d\n", hc->multi_count);
++ DWC_PRINT(" xfer_started: %d\n", hc->xfer_started);
++ DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff);
++ DWC_PRINT(" xfer_len: %d\n", hc->xfer_len);
++ DWC_PRINT(" xfer_count: %d\n", hc->xfer_count);
++ DWC_PRINT(" halt_on_queue: %d\n", hc->halt_on_queue);
++ DWC_PRINT(" halt_pending: %d\n", hc->halt_pending);
++ DWC_PRINT(" halt_status: %d\n", hc->halt_status);
++ DWC_PRINT(" do_split: %d\n", hc->do_split);
++ DWC_PRINT(" complete_split: %d\n", hc->complete_split);
++ DWC_PRINT(" hub_addr: %d\n", hc->hub_addr);
++ DWC_PRINT(" port_addr: %d\n", hc->port_addr);
++ DWC_PRINT(" xact_pos: %d\n", hc->xact_pos);
++ DWC_PRINT(" requests: %d\n", hc->requests);
++ DWC_PRINT(" qh: %p\n", hc->qh);
++ if (hc->xfer_started) {
++ hfnum_data_t hfnum;
++ hcchar_data_t hcchar;
++ hctsiz_data_t hctsiz;
++ hcint_data_t hcint;
++ hcintmsk_data_t hcintmsk;
++ hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum);
++ hcchar.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hcchar);
++ hctsiz.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hctsiz);
++ hcint.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hcint);
++ hcintmsk.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hcintmsk);
++ DWC_PRINT(" hfnum: 0x%08x\n", hfnum.d32);
++ DWC_PRINT(" hcchar: 0x%08x\n", hcchar.d32);
++ DWC_PRINT(" hctsiz: 0x%08x\n", hctsiz.d32);
++ DWC_PRINT(" hcint: 0x%08x\n", hcint.d32);
++ DWC_PRINT(" hcintmsk: 0x%08x\n", hcintmsk.d32);
++ }
++ if (hc->xfer_started && (hc->qh != NULL) && (hc->qh->qtd_in_process != NULL)) {
++ dwc_otg_qtd_t *qtd;
++ struct urb *urb;
++ qtd = hc->qh->qtd_in_process;
++ urb = qtd->urb;
++ DWC_PRINT(" URB Info:\n");
++ DWC_PRINT(" qtd: %p, urb: %p\n", qtd, urb);
++ if (urb != NULL) {
++ DWC_PRINT(" Dev: %d, EP: %d %s\n",
++ usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe),
++ usb_pipein(urb->pipe) ? "IN" : "OUT");
++ DWC_PRINT(" Max packet size: %d\n",
++ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
++ DWC_PRINT(" transfer_buffer: %p\n", urb->transfer_buffer);
++ DWC_PRINT(" transfer_dma: %p\n", (void *)urb->transfer_dma);
++ DWC_PRINT(" transfer_buffer_length: %d\n", urb->transfer_buffer_length);
++ DWC_PRINT(" actual_length: %d\n", urb->actual_length);
++ }
++ }
++ }
++ //DWC_PRINT(" non_periodic_channels: %d\n", _hcd->non_periodic_channels);
++ //DWC_PRINT(" periodic_channels: %d\n", _hcd->periodic_channels);
++ DWC_PRINT(" available_channels: %d\n", _hcd->available_host_channels);
++ DWC_PRINT(" periodic_usecs: %d\n", _hcd->periodic_usecs);
++ np_tx_status.d32 = dwc_read_reg32(&_hcd->core_if->core_global_regs->gnptxsts);
++ DWC_PRINT(" NP Tx Req Queue Space Avail: %d\n", np_tx_status.b.nptxqspcavail);
++ DWC_PRINT(" NP Tx FIFO Space Avail: %d\n", np_tx_status.b.nptxfspcavail);
++ p_tx_status.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hptxsts);
++ DWC_PRINT(" P Tx Req Queue Space Avail: %d\n", p_tx_status.b.ptxqspcavail);
++ DWC_PRINT(" P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail);
++ dwc_otg_hcd_dump_frrem(_hcd);
++ dwc_otg_dump_global_registers(_hcd->core_if);
++ dwc_otg_dump_host_registers(_hcd->core_if);
++ DWC_PRINT("************************************************************\n");
++ DWC_PRINT("\n");
++#endif
++}
++#endif /* DWC_DEVICE_ONLY */
+diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd.h b/drivers/usb/dwc_otg/dwc_otg_hcd.h
+new file mode 100644
+index 0000000..8a20dff
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_hcd.h
+@@ -0,0 +1,676 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd.h $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 537387 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++#if !defined(__DWC_HCD_H__)
++#define __DWC_HCD_H__
++
++#include <linux/list.h>
++#include <linux/usb.h>
++#include <linux/usb/hcd.h>
++
++struct lm_device;
++struct dwc_otg_device;
++
++#include "dwc_otg_cil.h"
++//#include "dwc_otg_ifx.h" // winder
++
++
++/**
++ * @file
++ *
++ * This file contains the structures, constants, and interfaces for
++ * the Host Contoller Driver (HCD).
++ *
++ * The Host Controller Driver (HCD) is responsible for translating requests
++ * from the USB Driver into the appropriate actions on the DWC_otg controller.
++ * It isolates the USBD from the specifics of the controller by providing an
++ * API to the USBD.
++ */
++
++/**
++ * Phases for control transfers.
++ */
++typedef enum dwc_otg_control_phase {
++ DWC_OTG_CONTROL_SETUP,
++ DWC_OTG_CONTROL_DATA,
++ DWC_OTG_CONTROL_STATUS
++} dwc_otg_control_phase_e;
++
++/** Transaction types. */
++typedef enum dwc_otg_transaction_type {
++ DWC_OTG_TRANSACTION_NONE,
++ DWC_OTG_TRANSACTION_PERIODIC,
++ DWC_OTG_TRANSACTION_NON_PERIODIC,
++ DWC_OTG_TRANSACTION_ALL
++} dwc_otg_transaction_type_e;
++
++/**
++ * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control,
++ * interrupt, or isochronous transfer. A single QTD is created for each URB
++ * (of one of these types) submitted to the HCD. The transfer associated with
++ * a QTD may require one or multiple transactions.
++ *
++ * A QTD is linked to a Queue Head, which is entered in either the
++ * non-periodic or periodic schedule for execution. When a QTD is chosen for
++ * execution, some or all of its transactions may be executed. After
++ * execution, the state of the QTD is updated. The QTD may be retired if all
++ * its transactions are complete or if an error occurred. Otherwise, it
++ * remains in the schedule so more transactions can be executed later.
++ */
++struct dwc_otg_qh;
++typedef struct dwc_otg_qtd {
++ /**
++ * Determines the PID of the next data packet for the data phase of
++ * control transfers. Ignored for other transfer types.<br>
++ * One of the following values:
++ * - DWC_OTG_HC_PID_DATA0
++ * - DWC_OTG_HC_PID_DATA1
++ */
++ uint8_t data_toggle;
++
++ /** Current phase for control transfers (Setup, Data, or Status). */
++ dwc_otg_control_phase_e control_phase;
++
++ /** Keep track of the current split type
++ * for FS/LS endpoints on a HS Hub */
++ uint8_t complete_split;
++
++ /** How many bytes transferred during SSPLIT OUT */
++ uint32_t ssplit_out_xfer_count;
++
++ /**
++ * Holds the number of bus errors that have occurred for a transaction
++ * within this transfer.
++ */
++ uint8_t error_count;
++
++ /**
++ * Index of the next frame descriptor for an isochronous transfer. A
++ * frame descriptor describes the buffer position and length of the
++ * data to be transferred in the next scheduled (micro)frame of an
++ * isochronous transfer. It also holds status for that transaction.
++ * The frame index starts at 0.
++ */
++ int isoc_frame_index;
++
++ /** Position of the ISOC split on full/low speed */
++ uint8_t isoc_split_pos;
++
++ /** Position of the ISOC split in the buffer for the current frame */
++ uint16_t isoc_split_offset;
++
++ /** URB for this transfer */
++ struct urb *urb;
++
++ /** This list of QTDs */
++ struct list_head qtd_list_entry;
++
++ /* Field to track the qh pointer */
++ struct dwc_otg_qh *qtd_qh_ptr;
++} dwc_otg_qtd_t;
++
++/**
++ * A Queue Head (QH) holds the static characteristics of an endpoint and
++ * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
++ * be entered in either the non-periodic or periodic schedule.
++ */
++typedef struct dwc_otg_qh {
++ /**
++ * Endpoint type.
++ * One of the following values:
++ * - USB_ENDPOINT_XFER_CONTROL
++ * - USB_ENDPOINT_XFER_ISOC
++ * - USB_ENDPOINT_XFER_BULK
++ * - USB_ENDPOINT_XFER_INT
++ */
++ uint8_t ep_type;
++ uint8_t ep_is_in;
++
++ /** wMaxPacketSize Field of Endpoint Descriptor. */
++ uint16_t maxp;
++
++ /**
++ * Determines the PID of the next data packet for non-control
++ * transfers. Ignored for control transfers.<br>
++ * One of the following values:
++ * - DWC_OTG_HC_PID_DATA0
++ * - DWC_OTG_HC_PID_DATA1
++ */
++ uint8_t data_toggle;
++
++ /** Ping state if 1. */
++ uint8_t ping_state;
++
++ /**
++ * List of QTDs for this QH.
++ */
++ struct list_head qtd_list;
++
++ /** Host channel currently processing transfers for this QH. */
++ dwc_hc_t *channel;
++
++ /** QTD currently assigned to a host channel for this QH. */
++ dwc_otg_qtd_t *qtd_in_process;
++
++ /** Full/low speed endpoint on high-speed hub requires split. */
++ uint8_t do_split;
++
++ /** @name Periodic schedule information */
++ /** @{ */
++
++ /** Bandwidth in microseconds per (micro)frame. */
++ uint8_t usecs;
++
++ /** Interval between transfers in (micro)frames. */
++ uint16_t interval;
++
++ /**
++ * (micro)frame to initialize a periodic transfer. The transfer
++ * executes in the following (micro)frame.
++ */
++ uint16_t sched_frame;
++
++ /** (micro)frame at which last start split was initialized. */
++ uint16_t start_split_frame;
++
++ /** @} */
++
++ uint16_t speed;
++ uint16_t frame_usecs[8];
++ /** Entry for QH in either the periodic or non-periodic schedule. */
++ struct list_head qh_list_entry;
++} dwc_otg_qh_t;
++
++/**
++ * This structure holds the state of the HCD, including the non-periodic and
++ * periodic schedules.
++ */
++typedef struct dwc_otg_hcd {
++ spinlock_t lock;
++
++ /** DWC OTG Core Interface Layer */
++ dwc_otg_core_if_t *core_if;
++
++ /** Internal DWC HCD Flags */
++ volatile union dwc_otg_hcd_internal_flags {
++ uint32_t d32;
++ struct {
++ unsigned port_connect_status_change : 1;
++ unsigned port_connect_status : 1;
++ unsigned port_reset_change : 1;
++ unsigned port_enable_change : 1;
++ unsigned port_suspend_change : 1;
++ unsigned port_over_current_change : 1;
++ unsigned reserved : 27;
++ } b;
++ } flags;
++
++ /**
++ * Inactive items in the non-periodic schedule. This is a list of
++ * Queue Heads. Transfers associated with these Queue Heads are not
++ * currently assigned to a host channel.
++ */
++ struct list_head non_periodic_sched_inactive;
++
++ /**
++ * Deferred items in the non-periodic schedule. This is a list of
++ * Queue Heads. Transfers associated with these Queue Heads are not
++ * currently assigned to a host channel.
++ * When we get an NAK, the QH goes here.
++ */
++ struct list_head non_periodic_sched_deferred;
++
++ /**
++ * Active items in the non-periodic schedule. This is a list of
++ * Queue Heads. Transfers associated with these Queue Heads are
++ * currently assigned to a host channel.
++ */
++ struct list_head non_periodic_sched_active;
++
++ /**
++ * Pointer to the next Queue Head to process in the active
++ * non-periodic schedule.
++ */
++ struct list_head *non_periodic_qh_ptr;
++
++ /**
++ * Inactive items in the periodic schedule. This is a list of QHs for
++ * periodic transfers that are _not_ scheduled for the next frame.
++ * Each QH in the list has an interval counter that determines when it
++ * needs to be scheduled for execution. This scheduling mechanism
++ * allows only a simple calculation for periodic bandwidth used (i.e.
++ * must assume that all periodic transfers may need to execute in the
++ * same frame). However, it greatly simplifies scheduling and should
++ * be sufficient for the vast majority of OTG hosts, which need to
++ * connect to a small number of peripherals at one time.
++ *
++ * Items move from this list to periodic_sched_ready when the QH
++ * interval counter is 0 at SOF.
++ */
++ struct list_head periodic_sched_inactive;
++
++ /**
++ * List of periodic QHs that are ready for execution in the next
++ * frame, but have not yet been assigned to host channels.
++ *
++ * Items move from this list to periodic_sched_assigned as host
++ * channels become available during the current frame.
++ */
++ struct list_head periodic_sched_ready;
++
++ /**
++ * List of periodic QHs to be executed in the next frame that are
++ * assigned to host channels.
++ *
++ * Items move from this list to periodic_sched_queued as the
++ * transactions for the QH are queued to the DWC_otg controller.
++ */
++ struct list_head periodic_sched_assigned;
++
++ /**
++ * List of periodic QHs that have been queued for execution.
++ *
++ * Items move from this list to either periodic_sched_inactive or
++ * periodic_sched_ready when the channel associated with the transfer
++ * is released. If the interval for the QH is 1, the item moves to
++ * periodic_sched_ready because it must be rescheduled for the next
++ * frame. Otherwise, the item moves to periodic_sched_inactive.
++ */
++ struct list_head periodic_sched_queued;
++
++ /**
++ * Total bandwidth claimed so far for periodic transfers. This value
++ * is in microseconds per (micro)frame. The assumption is that all
++ * periodic transfers may occur in the same (micro)frame.
++ */
++ uint16_t periodic_usecs;
++
++ /**
++ * Total bandwidth claimed so far for all periodic transfers
++ * in a frame.
++ * This will include a mixture of HS and FS transfers.
++ * Units are microseconds per (micro)frame.
++ * We have a budget per frame and have to schedule
++ * transactions accordingly.
++ * Watch out for the fact that things are actually scheduled for the
++ * "next frame".
++ */
++ uint16_t frame_usecs[8];
++
++ /**
++ * Frame number read from the core at SOF. The value ranges from 0 to
++ * DWC_HFNUM_MAX_FRNUM.
++ */
++ uint16_t frame_number;
++
++ /**
++ * Free host channels in the controller. This is a list of
++ * dwc_hc_t items.
++ */
++ struct list_head free_hc_list;
++
++ /**
++ * Number of available host channels.
++ */
++ int available_host_channels;
++
++ /**
++ * Array of pointers to the host channel descriptors. Allows accessing
++ * a host channel descriptor given the host channel number. This is
++ * useful in interrupt handlers.
++ */
++ dwc_hc_t *hc_ptr_array[MAX_EPS_CHANNELS];
++
++ /**
++ * Buffer to use for any data received during the status phase of a
++ * control transfer. Normally no data is transferred during the status
++ * phase. This buffer is used as a bit bucket.
++ */
++ uint8_t *status_buf;
++
++ /**
++ * DMA address for status_buf.
++ */
++ dma_addr_t status_buf_dma;
++#define DWC_OTG_HCD_STATUS_BUF_SIZE 64
++
++ /**
++ * Structure to allow starting the HCD in a non-interrupt context
++ * during an OTG role change.
++ */
++ struct work_struct start_work;
++ struct usb_hcd *_p;
++
++ /**
++ * Connection timer. An OTG host must display a message if the device
++ * does not connect. Started when the VBus power is turned on via
++ * sysfs attribute "buspower".
++ */
++ struct timer_list conn_timer;
++
++ /* Tasket to do a reset */
++ struct tasklet_struct *reset_tasklet;
++
++#ifdef DEBUG
++ uint32_t frrem_samples;
++ uint64_t frrem_accum;
++
++ uint32_t hfnum_7_samples_a;
++ uint64_t hfnum_7_frrem_accum_a;
++ uint32_t hfnum_0_samples_a;
++ uint64_t hfnum_0_frrem_accum_a;
++ uint32_t hfnum_other_samples_a;
++ uint64_t hfnum_other_frrem_accum_a;
++
++ uint32_t hfnum_7_samples_b;
++ uint64_t hfnum_7_frrem_accum_b;
++ uint32_t hfnum_0_samples_b;
++ uint64_t hfnum_0_frrem_accum_b;
++ uint32_t hfnum_other_samples_b;
++ uint64_t hfnum_other_frrem_accum_b;
++#endif
++
++} dwc_otg_hcd_t;
++
++/** Gets the dwc_otg_hcd from a struct usb_hcd */
++static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd)
++{
++ return (dwc_otg_hcd_t *)(hcd->hcd_priv);
++}
++
++/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */
++static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t *dwc_otg_hcd)
++{
++ return container_of((void *)dwc_otg_hcd, struct usb_hcd, hcd_priv);
++}
++
++/** @name HCD Create/Destroy Functions */
++/** @{ */
++extern int __devinit dwc_otg_hcd_init(struct device *_dev, dwc_otg_device_t * dwc_otg_device);
++extern void dwc_otg_hcd_remove(struct device *_dev);
++/** @} */
++
++/** @name Linux HC Driver API Functions */
++/** @{ */
++
++extern int dwc_otg_hcd_start(struct usb_hcd *hcd);
++extern void dwc_otg_hcd_stop(struct usb_hcd *hcd);
++extern int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd);
++extern void dwc_otg_hcd_free(struct usb_hcd *hcd);
++
++extern int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd,
++ struct urb *urb,
++ gfp_t mem_flags);
++extern int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd,
++ struct urb *urb,
++ int status);
++extern irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd);
++
++extern void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd,
++ struct usb_host_endpoint *ep);
++
++extern int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd,
++ char *buf);
++extern int dwc_otg_hcd_hub_control(struct usb_hcd *hcd,
++ u16 typeReq,
++ u16 wValue,
++ u16 wIndex,
++ char *buf,
++ u16 wLength);
++
++/** @} */
++
++/** @name Transaction Execution Functions */
++/** @{ */
++extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *_hcd);
++extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *_hcd,
++ dwc_otg_transaction_type_e _tr_type);
++extern void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *_hcd, struct urb *_urb,
++ int _status);
++/** @} */
++
++/** @name Interrupt Handler Functions */
++/** @{ */
++extern int32_t dwc_otg_hcd_handle_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_sof_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_port_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_disconnect_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_hc_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_hc_n_intr (dwc_otg_hcd_t *_dwc_otg_hcd, uint32_t _num);
++extern int32_t dwc_otg_hcd_handle_session_req_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
++/** @} */
++
++
++/** @name Schedule Queue Functions */
++/** @{ */
++
++/* Implemented in dwc_otg_hcd_queue.c */
++extern dwc_otg_qh_t *dwc_otg_hcd_qh_create (dwc_otg_hcd_t *_hcd, struct urb *_urb);
++extern void dwc_otg_hcd_qh_init (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, struct urb *_urb);
++extern void dwc_otg_hcd_qh_free (dwc_otg_qh_t *_qh);
++extern int dwc_otg_hcd_qh_add (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh);
++extern void dwc_otg_hcd_qh_remove (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh);
++extern void dwc_otg_hcd_qh_deactivate (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, int sched_csplit);
++extern int dwc_otg_hcd_qh_deferr (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, int delay);
++
++/** Remove and free a QH */
++static inline void dwc_otg_hcd_qh_remove_and_free (dwc_otg_hcd_t *_hcd,
++ dwc_otg_qh_t *_qh)
++{
++ dwc_otg_hcd_qh_remove (_hcd, _qh);
++ dwc_otg_hcd_qh_free (_qh);
++}
++
++/** Allocates memory for a QH structure.
++ * @return Returns the memory allocate or NULL on error. */
++static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc (void)
++{
++#ifdef _SC_BUILD_
++ return (dwc_otg_qh_t *) kmalloc (sizeof(dwc_otg_qh_t), GFP_ATOMIC);
++#else
++ return (dwc_otg_qh_t *) kmalloc (sizeof(dwc_otg_qh_t), GFP_KERNEL);
++#endif
++}
++
++extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create (struct urb *urb);
++extern void dwc_otg_hcd_qtd_init (dwc_otg_qtd_t *qtd, struct urb *urb);
++extern int dwc_otg_hcd_qtd_add (dwc_otg_qtd_t *qtd, dwc_otg_hcd_t *dwc_otg_hcd);
++
++/** Allocates memory for a QTD structure.
++ * @return Returns the memory allocate or NULL on error. */
++static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc (void)
++{
++#ifdef _SC_BUILD_
++ return (dwc_otg_qtd_t *) kmalloc (sizeof(dwc_otg_qtd_t), GFP_ATOMIC);
++#else
++ return (dwc_otg_qtd_t *) kmalloc (sizeof(dwc_otg_qtd_t), GFP_KERNEL);
++#endif
++}
++
++/** Frees the memory for a QTD structure. QTD should already be removed from
++ * list.
++ * @param[in] _qtd QTD to free.*/
++static inline void dwc_otg_hcd_qtd_free (dwc_otg_qtd_t *_qtd)
++{
++ kfree (_qtd);
++}
++
++/** Removes a QTD from list.
++ * @param[in] _qtd QTD to remove from list. */
++static inline void dwc_otg_hcd_qtd_remove (dwc_otg_qtd_t *_qtd)
++{
++ unsigned long flags;
++ local_irq_save (flags);
++ list_del (&_qtd->qtd_list_entry);
++ local_irq_restore (flags);
++}
++
++/** Remove and free a QTD */
++static inline void dwc_otg_hcd_qtd_remove_and_free (dwc_otg_qtd_t *_qtd)
++{
++ dwc_otg_hcd_qtd_remove (_qtd);
++ dwc_otg_hcd_qtd_free (_qtd);
++}
++
++/** @} */
++
++
++/** @name Internal Functions */
++/** @{ */
++dwc_otg_qh_t *dwc_urb_to_qh(struct urb *_urb);
++void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *_hcd);
++void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *_hcd);
++/** @} */
++
++
++/** Gets the usb_host_endpoint associated with an URB. */
++static inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *_urb)
++{
++ struct usb_device *dev = _urb->dev;
++ int ep_num = usb_pipeendpoint(_urb->pipe);
++ if (usb_pipein(_urb->pipe))
++ return dev->ep_in[ep_num];
++ else
++ return dev->ep_out[ep_num];
++}
++
++/**
++ * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is
++ * qualified with its direction (possible 32 endpoints per device).
++ */
++#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) \
++ ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \
++ ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4)
++
++/** Gets the QH that contains the list_head */
++#define dwc_list_to_qh(_list_head_ptr_) (container_of(_list_head_ptr_,dwc_otg_qh_t,qh_list_entry))
++
++/** Gets the QTD that contains the list_head */
++#define dwc_list_to_qtd(_list_head_ptr_) (container_of(_list_head_ptr_,dwc_otg_qtd_t,qtd_list_entry))
++
++/** Check if QH is non-periodic */
++#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == USB_ENDPOINT_XFER_BULK) || \
++ (_qh_ptr_->ep_type == USB_ENDPOINT_XFER_CONTROL))
++
++/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */
++#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
++
++/** Packet size for any kind of endpoint descriptor */
++#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
++
++/**
++ * Returns true if _frame1 is less than or equal to _frame2. The comparison is
++ * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the
++ * frame number when the max frame number is reached.
++ */
++static inline int dwc_frame_num_le(uint16_t _frame1, uint16_t _frame2)
++{
++ return ((_frame2 - _frame1) & DWC_HFNUM_MAX_FRNUM) <=
++ (DWC_HFNUM_MAX_FRNUM >> 1);
++}
++
++/**
++ * Returns true if _frame1 is greater than _frame2. The comparison is done
++ * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame
++ * number when the max frame number is reached.
++ */
++static inline int dwc_frame_num_gt(uint16_t _frame1, uint16_t _frame2)
++{
++ return (_frame1 != _frame2) &&
++ (((_frame1 - _frame2) & DWC_HFNUM_MAX_FRNUM) <
++ (DWC_HFNUM_MAX_FRNUM >> 1));
++}
++
++/**
++ * Increments _frame by the amount specified by _inc. The addition is done
++ * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value.
++ */
++static inline uint16_t dwc_frame_num_inc(uint16_t _frame, uint16_t _inc)
++{
++ return (_frame + _inc) & DWC_HFNUM_MAX_FRNUM;
++}
++
++static inline uint16_t dwc_full_frame_num (uint16_t _frame)
++{
++ return ((_frame) & DWC_HFNUM_MAX_FRNUM) >> 3;
++}
++
++static inline uint16_t dwc_micro_frame_num (uint16_t _frame)
++{
++ return (_frame) & 0x7;
++}
++
++#ifdef DEBUG
++/**
++ * Macro to sample the remaining PHY clocks left in the current frame. This
++ * may be used during debugging to determine the average time it takes to
++ * execute sections of code. There are two possible sample points, "a" and
++ * "b", so the _letter argument must be one of these values.
++ *
++ * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For
++ * example, "cat /sys/devices/lm0/hcd_frrem".
++ */
++#define dwc_sample_frrem(_hcd, _qh, _letter) \
++{ \
++ hfnum_data_t hfnum; \
++ dwc_otg_qtd_t *qtd; \
++ qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \
++ if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \
++ hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum); \
++ switch (hfnum.b.frnum & 0x7) { \
++ case 7: \
++ _hcd->hfnum_7_samples_##_letter++; \
++ _hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \
++ break; \
++ case 0: \
++ _hcd->hfnum_0_samples_##_letter++; \
++ _hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \
++ break; \
++ default: \
++ _hcd->hfnum_other_samples_##_letter++; \
++ _hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \
++ break; \
++ } \
++ } \
++}
++#else // DEBUG
++#define dwc_sample_frrem(_hcd, _qh, _letter)
++#endif // DEBUG
++#endif // __DWC_HCD_H__
++#endif /* DWC_DEVICE_ONLY */
+diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c b/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
+new file mode 100644
+index 0000000..834b5e0
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
+@@ -0,0 +1,1841 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd_intr.c $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 553126 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++#include "dwc_otg_driver.h"
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++
++const int erratum_usb09_patched = 0;
++const int deferral_on = 1;
++const int nak_deferral_delay = 8;
++const int nyet_deferral_delay = 1;
++/** @file
++ * This file contains the implementation of the HCD Interrupt handlers.
++ */
++
++/** This function handles interrupts for the HCD. */
++int32_t dwc_otg_hcd_handle_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
++{
++ int retval = 0;
++
++ dwc_otg_core_if_t *core_if = _dwc_otg_hcd->core_if;
++ gintsts_data_t gintsts;
++#ifdef DEBUG
++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++#endif
++
++ /* Check if HOST Mode */
++ if (dwc_otg_is_host_mode(core_if)) {
++ gintsts.d32 = dwc_otg_read_core_intr(core_if);
++ if (!gintsts.d32) {
++ return 0;
++ }
++
++#ifdef DEBUG
++ /* Don't print debug message in the interrupt handler on SOF */
++# ifndef DEBUG_SOF
++ if (gintsts.d32 != DWC_SOF_INTR_MASK)
++# endif
++ DWC_DEBUGPL (DBG_HCD, "\n");
++#endif
++
++#ifdef DEBUG
++# ifndef DEBUG_SOF
++ if (gintsts.d32 != DWC_SOF_INTR_MASK)
++# endif
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x\n", gintsts.d32);
++#endif
++
++ if (gintsts.b.sofintr) {
++ retval |= dwc_otg_hcd_handle_sof_intr (_dwc_otg_hcd);
++ }
++ if (gintsts.b.rxstsqlvl) {
++ retval |= dwc_otg_hcd_handle_rx_status_q_level_intr (_dwc_otg_hcd);
++ }
++ if (gintsts.b.nptxfempty) {
++ retval |= dwc_otg_hcd_handle_np_tx_fifo_empty_intr (_dwc_otg_hcd);
++ }
++ if (gintsts.b.i2cintr) {
++ /** @todo Implement i2cintr handler. */
++ }
++ if (gintsts.b.portintr) {
++ retval |= dwc_otg_hcd_handle_port_intr (_dwc_otg_hcd);
++ }
++ if (gintsts.b.hcintr) {
++ retval |= dwc_otg_hcd_handle_hc_intr (_dwc_otg_hcd);
++ }
++ if (gintsts.b.ptxfempty) {
++ retval |= dwc_otg_hcd_handle_perio_tx_fifo_empty_intr (_dwc_otg_hcd);
++ }
++#ifdef DEBUG
++# ifndef DEBUG_SOF
++ if (gintsts.d32 != DWC_SOF_INTR_MASK)
++# endif
++ {
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Finished Servicing Interrupts\n");
++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n",
++ dwc_read_reg32(&global_regs->gintsts));
++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n",
++ dwc_read_reg32(&global_regs->gintmsk));
++ }
++#endif
++
++#ifdef DEBUG
++# ifndef DEBUG_SOF
++ if (gintsts.d32 != DWC_SOF_INTR_MASK)
++# endif
++ DWC_DEBUGPL (DBG_HCD, "\n");
++#endif
++
++ }
++
++ return retval;
++}
++
++#ifdef DWC_TRACK_MISSED_SOFS
++#warning Compiling code to track missed SOFs
++#define FRAME_NUM_ARRAY_SIZE 1000
++/**
++ * This function is for debug only.
++ */
++static inline void track_missed_sofs(uint16_t _curr_frame_number) {
++ static uint16_t frame_num_array[FRAME_NUM_ARRAY_SIZE];
++ static uint16_t last_frame_num_array[FRAME_NUM_ARRAY_SIZE];
++ static int frame_num_idx = 0;
++ static uint16_t last_frame_num = DWC_HFNUM_MAX_FRNUM;
++ static int dumped_frame_num_array = 0;
++
++ if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) {
++ if ((((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) != _curr_frame_number)) {
++ frame_num_array[frame_num_idx] = _curr_frame_number;
++ last_frame_num_array[frame_num_idx++] = last_frame_num;
++ }
++ } else if (!dumped_frame_num_array) {
++ int i;
++ printk(KERN_EMERG USB_DWC "Frame Last Frame\n");
++ printk(KERN_EMERG USB_DWC "----- ----------\n");
++ for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) {
++ printk(KERN_EMERG USB_DWC "0x%04x 0x%04x\n",
++ frame_num_array[i], last_frame_num_array[i]);
++ }
++ dumped_frame_num_array = 1;
++ }
++ last_frame_num = _curr_frame_number;
++}
++#endif
++
++/**
++ * Handles the start-of-frame interrupt in host mode. Non-periodic
++ * transactions may be queued to the DWC_otg controller for the current
++ * (micro)frame. Periodic transactions may be queued to the controller for the
++ * next (micro)frame.
++ */
++int32_t dwc_otg_hcd_handle_sof_intr (dwc_otg_hcd_t *_hcd)
++{
++ hfnum_data_t hfnum;
++ struct list_head *qh_entry;
++ dwc_otg_qh_t *qh;
++ dwc_otg_transaction_type_e tr_type;
++ gintsts_data_t gintsts = {.d32 = 0};
++
++ hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum);
++
++#ifdef DEBUG_SOF
++ DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n");
++#endif
++
++ _hcd->frame_number = hfnum.b.frnum;
++
++#ifdef DEBUG
++ _hcd->frrem_accum += hfnum.b.frrem;
++ _hcd->frrem_samples++;
++#endif
++
++#ifdef DWC_TRACK_MISSED_SOFS
++ track_missed_sofs(_hcd->frame_number);
++#endif
++
++ /* Determine whether any periodic QHs should be executed. */
++ qh_entry = _hcd->periodic_sched_inactive.next;
++ while (qh_entry != &_hcd->periodic_sched_inactive) {
++ qh = list_entry(qh_entry, dwc_otg_qh_t, qh_list_entry);
++ qh_entry = qh_entry->next;
++ if (dwc_frame_num_le(qh->sched_frame, _hcd->frame_number)) {
++ /*
++ * Move QH to the ready list to be executed next
++ * (micro)frame.
++ */
++ list_move(&qh->qh_list_entry, &_hcd->periodic_sched_ready);
++ }
++ }
++
++ tr_type = dwc_otg_hcd_select_transactions(_hcd);
++ if (tr_type != DWC_OTG_TRANSACTION_NONE) {
++ dwc_otg_hcd_queue_transactions(_hcd, tr_type);
++ }
++
++ /* Clear interrupt */
++ gintsts.b.sofintr = 1;
++ dwc_write_reg32(&_hcd->core_if->core_global_regs->gintsts, gintsts.d32);
++
++ return 1;
++}
++
++/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at
++ * least one packet in the Rx FIFO. The packets are moved from the FIFO to
++ * memory if the DWC_otg controller is operating in Slave mode. */
++int32_t dwc_otg_hcd_handle_rx_status_q_level_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
++{
++ host_grxsts_data_t grxsts;
++ dwc_hc_t *hc = NULL;
++
++ DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n");
++
++ grxsts.d32 = dwc_read_reg32(&_dwc_otg_hcd->core_if->core_global_regs->grxstsp);
++
++ hc = _dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum];
++
++ /* Packet Status */
++ DWC_DEBUGPL(DBG_HCDV, " Ch num = %d\n", grxsts.b.chnum);
++ DWC_DEBUGPL(DBG_HCDV, " Count = %d\n", grxsts.b.bcnt);
++ DWC_DEBUGPL(DBG_HCDV, " DPID = %d, hc.dpid = %d\n", grxsts.b.dpid, hc->data_pid_start);
++ DWC_DEBUGPL(DBG_HCDV, " PStatus = %d\n", grxsts.b.pktsts);
++
++ switch (grxsts.b.pktsts) {
++ case DWC_GRXSTS_PKTSTS_IN:
++ /* Read the data into the host buffer. */
++ if (grxsts.b.bcnt > 0) {
++ dwc_otg_read_packet(_dwc_otg_hcd->core_if,
++ hc->xfer_buff,
++ grxsts.b.bcnt);
++
++ /* Update the HC fields for the next packet received. */
++ hc->xfer_count += grxsts.b.bcnt;
++ hc->xfer_buff += grxsts.b.bcnt;
++ }
++
++ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
++ case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR:
++ case DWC_GRXSTS_PKTSTS_CH_HALTED:
++ /* Handled in interrupt, just ignore data */
++ break;
++ default:
++ DWC_ERROR ("RX_STS_Q Interrupt: Unknown status %d\n", grxsts.b.pktsts);
++ break;
++ }
++
++ return 1;
++}
++
++/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More
++ * data packets may be written to the FIFO for OUT transfers. More requests
++ * may be written to the non-periodic request queue for IN transfers. This
++ * interrupt is enabled only in Slave mode. */
++int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
++{
++ DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n");
++ dwc_otg_hcd_queue_transactions(_dwc_otg_hcd,
++ DWC_OTG_TRANSACTION_NON_PERIODIC);
++ return 1;
++}
++
++/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data
++ * packets may be written to the FIFO for OUT transfers. More requests may be
++ * written to the periodic request queue for IN transfers. This interrupt is
++ * enabled only in Slave mode. */
++int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
++{
++ DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n");
++ dwc_otg_hcd_queue_transactions(_dwc_otg_hcd,
++ DWC_OTG_TRANSACTION_PERIODIC);
++ return 1;
++}
++
++/** There are multiple conditions that can cause a port interrupt. This function
++ * determines which interrupt conditions have occurred and handles them
++ * appropriately. */
++int32_t dwc_otg_hcd_handle_port_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
++{
++ int retval = 0;
++ hprt0_data_t hprt0;
++ hprt0_data_t hprt0_modify;
++
++ hprt0.d32 = dwc_read_reg32(_dwc_otg_hcd->core_if->host_if->hprt0);
++ hprt0_modify.d32 = dwc_read_reg32(_dwc_otg_hcd->core_if->host_if->hprt0);
++
++ /* Clear appropriate bits in HPRT0 to clear the interrupt bit in
++ * GINTSTS */
++
++ hprt0_modify.b.prtena = 0;
++ hprt0_modify.b.prtconndet = 0;
++ hprt0_modify.b.prtenchng = 0;
++ hprt0_modify.b.prtovrcurrchng = 0;
++
++ /* Port Connect Detected
++ * Set flag and clear if detected */
++ if (hprt0.b.prtconndet) {
++ DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x "
++ "Port Connect Detected--\n", hprt0.d32);
++ _dwc_otg_hcd->flags.b.port_connect_status_change = 1;
++ _dwc_otg_hcd->flags.b.port_connect_status = 1;
++ hprt0_modify.b.prtconndet = 1;
++
++ /* B-Device has connected, Delete the connection timer. */
++ del_timer( &_dwc_otg_hcd->conn_timer );
++
++ /* The Hub driver asserts a reset when it sees port connect
++ * status change flag */
++ retval |= 1;
++ }
++
++ /* Port Enable Changed
++ * Clear if detected - Set internal flag if disabled */
++ if (hprt0.b.prtenchng) {
++ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x "
++ "Port Enable Changed--\n", hprt0.d32);
++ hprt0_modify.b.prtenchng = 1;
++ if (hprt0.b.prtena == 1) {
++ int do_reset = 0;
++ dwc_otg_core_params_t *params = _dwc_otg_hcd->core_if->core_params;
++ dwc_otg_core_global_regs_t *global_regs = _dwc_otg_hcd->core_if->core_global_regs;
++ dwc_otg_host_if_t *host_if = _dwc_otg_hcd->core_if->host_if;
++
++ /* Check if we need to adjust the PHY clock speed for
++ * low power and adjust it */
++ if (params->host_support_fs_ls_low_power)
++ {
++ gusbcfg_data_t usbcfg;
++
++ usbcfg.d32 = dwc_read_reg32 (&global_regs->gusbcfg);
++
++ if ((hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) ||
++ (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_FULL_SPEED))
++ {
++ /*
++ * Low power
++ */
++ hcfg_data_t hcfg;
++ if (usbcfg.b.phylpwrclksel == 0) {
++ /* Set PHY low power clock select for FS/LS devices */
++ usbcfg.b.phylpwrclksel = 1;
++ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++ do_reset = 1;
++ }
++
++ hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
++
++ if ((hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) &&
++ (params->host_ls_low_power_phy_clk ==
++ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ))
++ {
++ /* 6 MHZ */
++ DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 6 MHz (Low Power)\n");
++ if (hcfg.b.fslspclksel != DWC_HCFG_6_MHZ) {
++ hcfg.b.fslspclksel = DWC_HCFG_6_MHZ;
++ dwc_write_reg32(&host_if->host_global_regs->hcfg,
++ hcfg.d32);
++ do_reset = 1;
++ }
++ }
++ else {
++ /* 48 MHZ */
++ DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 48 MHz ()\n");
++ if (hcfg.b.fslspclksel != DWC_HCFG_48_MHZ) {
++ hcfg.b.fslspclksel = DWC_HCFG_48_MHZ;
++ dwc_write_reg32(&host_if->host_global_regs->hcfg,
++ hcfg.d32);
++ do_reset = 1;
++ }
++ }
++ }
++ else {
++ /*
++ * Not low power
++ */
++ if (usbcfg.b.phylpwrclksel == 1) {
++ usbcfg.b.phylpwrclksel = 0;
++ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
++ do_reset = 1;
++ }
++ }
++
++ if (do_reset) {
++ tasklet_schedule(_dwc_otg_hcd->reset_tasklet);
++ }
++ }
++
++ if (!do_reset) {
++ /* Port has been enabled set the reset change flag */
++ _dwc_otg_hcd->flags.b.port_reset_change = 1;
++ }
++
++ } else {
++ _dwc_otg_hcd->flags.b.port_enable_change = 1;
++ }
++ retval |= 1;
++ }
++
++ /** Overcurrent Change Interrupt */
++ if (hprt0.b.prtovrcurrchng) {
++ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x "
++ "Port Overcurrent Changed--\n", hprt0.d32);
++ _dwc_otg_hcd->flags.b.port_over_current_change = 1;
++ hprt0_modify.b.prtovrcurrchng = 1;
++ retval |= 1;
++ }
++
++ /* Clear Port Interrupts */
++ dwc_write_reg32(_dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32);
++
++ return retval;
++}
++
++
++/** This interrupt indicates that one or more host channels has a pending
++ * interrupt. There are multiple conditions that can cause each host channel
++ * interrupt. This function determines which conditions have occurred for each
++ * host channel interrupt and handles them appropriately. */
++int32_t dwc_otg_hcd_handle_hc_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
++{
++ int i;
++ int retval = 0;
++ haint_data_t haint;
++
++ /* Clear appropriate bits in HCINTn to clear the interrupt bit in
++ * GINTSTS */
++
++ haint.d32 = dwc_otg_read_host_all_channels_intr(_dwc_otg_hcd->core_if);
++
++ for (i=0; i<_dwc_otg_hcd->core_if->core_params->host_channels; i++) {
++ if (haint.b2.chint & (1 << i)) {
++ retval |= dwc_otg_hcd_handle_hc_n_intr (_dwc_otg_hcd, i);
++ }
++ }
++
++ return retval;
++}
++
++/* Macro used to clear one channel interrupt */
++#define clear_hc_int(_hc_regs_,_intr_) \
++do { \
++ hcint_data_t hcint_clear = {.d32 = 0}; \
++ hcint_clear.b._intr_ = 1; \
++ dwc_write_reg32(&((_hc_regs_)->hcint), hcint_clear.d32); \
++} while (0)
++
++/*
++ * Macro used to disable one channel interrupt. Channel interrupts are
++ * disabled when the channel is halted or released by the interrupt handler.
++ * There is no need to handle further interrupts of that type until the
++ * channel is re-assigned. In fact, subsequent handling may cause crashes
++ * because the channel structures are cleaned up when the channel is released.
++ */
++#define disable_hc_int(_hc_regs_,_intr_) \
++do { \
++ hcintmsk_data_t hcintmsk = {.d32 = 0}; \
++ hcintmsk.b._intr_ = 1; \
++ dwc_modify_reg32(&((_hc_regs_)->hcintmsk), hcintmsk.d32, 0); \
++} while (0)
++
++/**
++ * Gets the actual length of a transfer after the transfer halts. _halt_status
++ * holds the reason for the halt.
++ *
++ * For IN transfers where _halt_status is DWC_OTG_HC_XFER_COMPLETE,
++ * *_short_read is set to 1 upon return if less than the requested
++ * number of bytes were transferred. Otherwise, *_short_read is set to 0 upon
++ * return. _short_read may also be NULL on entry, in which case it remains
++ * unchanged.
++ */
++static uint32_t get_actual_xfer_length(dwc_hc_t *_hc,
++ dwc_otg_hc_regs_t *_hc_regs,
++ dwc_otg_qtd_t *_qtd,
++ dwc_otg_halt_status_e _halt_status,
++ int *_short_read)
++{
++ hctsiz_data_t hctsiz;
++ uint32_t length;
++
++ if (_short_read != NULL) {
++ *_short_read = 0;
++ }
++ hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
++
++ if (_halt_status == DWC_OTG_HC_XFER_COMPLETE) {
++ if (_hc->ep_is_in) {
++ length = _hc->xfer_len - hctsiz.b.xfersize;
++ if (_short_read != NULL) {
++ *_short_read = (hctsiz.b.xfersize != 0);
++ }
++ } else if (_hc->qh->do_split) {
++ length = _qtd->ssplit_out_xfer_count;
++ } else {
++ length = _hc->xfer_len;
++ }
++ } else {
++ /*
++ * Must use the hctsiz.pktcnt field to determine how much data
++ * has been transferred. This field reflects the number of
++ * packets that have been transferred via the USB. This is
++ * always an integral number of packets if the transfer was
++ * halted before its normal completion. (Can't use the
++ * hctsiz.xfersize field because that reflects the number of
++ * bytes transferred via the AHB, not the USB).
++ */
++ length = (_hc->start_pkt_count - hctsiz.b.pktcnt) * _hc->max_packet;
++ }
++
++ return length;
++}
++
++/**
++ * Updates the state of the URB after a Transfer Complete interrupt on the
++ * host channel. Updates the actual_length field of the URB based on the
++ * number of bytes transferred via the host channel. Sets the URB status
++ * if the data transfer is finished.
++ *
++ * @return 1 if the data transfer specified by the URB is completely finished,
++ * 0 otherwise.
++ */
++static int update_urb_state_xfer_comp(dwc_hc_t *_hc,
++ dwc_otg_hc_regs_t * _hc_regs, struct urb *_urb,
++ dwc_otg_qtd_t * _qtd, int *status)
++{
++ int xfer_done = 0;
++ int short_read = 0;
++
++ _urb->actual_length += get_actual_xfer_length(_hc, _hc_regs, _qtd,
++ DWC_OTG_HC_XFER_COMPLETE,
++ &short_read);
++
++ if (short_read || (_urb->actual_length == _urb->transfer_buffer_length)) {
++ xfer_done = 1;
++ if (short_read && (_urb->transfer_flags & URB_SHORT_NOT_OK)) {
++ *status = -EREMOTEIO;
++ } else {
++ *status = 0;
++ }
++ }
++
++#ifdef DEBUG
++ {
++ hctsiz_data_t hctsiz;
++ hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
++ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
++ __func__, (_hc->ep_is_in ? "IN" : "OUT"), _hc->hc_num);
++ DWC_DEBUGPL(DBG_HCDV, " hc->xfer_len %d\n", _hc->xfer_len);
++ DWC_DEBUGPL(DBG_HCDV, " hctsiz.xfersize %d\n", hctsiz.b.xfersize);
++ DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n",
++ _urb->transfer_buffer_length);
++ DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", _urb->actual_length);
++ DWC_DEBUGPL(DBG_HCDV, " short_read %d, xfer_done %d\n",
++ short_read, xfer_done);
++ }
++#endif
++
++ return xfer_done;
++}
++
++/*
++ * Save the starting data toggle for the next transfer. The data toggle is
++ * saved in the QH for non-control transfers and it's saved in the QTD for
++ * control transfers.
++ */
++static void save_data_toggle(dwc_hc_t *_hc,
++ dwc_otg_hc_regs_t *_hc_regs,
++ dwc_otg_qtd_t *_qtd)
++{
++ hctsiz_data_t hctsiz;
++ hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
++
++ if (_hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) {
++ dwc_otg_qh_t *qh = _hc->qh;
++ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
++ qh->data_toggle = DWC_OTG_HC_PID_DATA0;
++ } else {
++ qh->data_toggle = DWC_OTG_HC_PID_DATA1;
++ }
++ } else {
++ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
++ _qtd->data_toggle = DWC_OTG_HC_PID_DATA0;
++ } else {
++ _qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
++ }
++ }
++}
++
++/**
++ * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic
++ * QHs, removes the QH from the active non-periodic schedule. If any QTDs are
++ * still linked to the QH, the QH is added to the end of the inactive
++ * non-periodic schedule. For periodic QHs, removes the QH from the periodic
++ * schedule if no more QTDs are linked to the QH.
++ */
++static void deactivate_qh(dwc_otg_hcd_t *_hcd,
++ dwc_otg_qh_t *_qh,
++ int free_qtd)
++{
++ int continue_split = 0;
++ dwc_otg_qtd_t *qtd;
++
++ DWC_DEBUGPL(DBG_HCDV, " %s(%p,%p,%d)\n", __func__, _hcd, _qh, free_qtd);
++
++ qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
++
++ if (qtd->complete_split) {
++ continue_split = 1;
++ }
++ else if ((qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID) ||
++ (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END))
++ {
++ continue_split = 1;
++ }
++
++ if (free_qtd) {
++ /*
++ * Note that this was previously a call to
++ * dwc_otg_hcd_qtd_remove_and_free(qtd), which frees the qtd.
++ * However, that call frees the qtd memory, and we continue in the
++ * interrupt logic to access it many more times, including writing
++ * to it. With slub debugging on, it is clear that we were writing
++ * to memory we had freed.
++ * Call this instead, and now I have moved the freeing of the memory to
++ * the end of processing this interrupt.
++ */
++ //dwc_otg_hcd_qtd_remove_and_free(qtd);
++ dwc_otg_hcd_qtd_remove(qtd);
++
++ continue_split = 0;
++ }
++
++ _qh->channel = NULL;
++ _qh->qtd_in_process = NULL;
++ dwc_otg_hcd_qh_deactivate(_hcd, _qh, continue_split);
++}
++
++/**
++ * Updates the state of an Isochronous URB when the transfer is stopped for
++ * any reason. The fields of the current entry in the frame descriptor array
++ * are set based on the transfer state and the input _halt_status. Completes
++ * the Isochronous URB if all the URB frames have been completed.
++ *
++ * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be
++ * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE.
++ */
++static dwc_otg_halt_status_e
++update_isoc_urb_state(dwc_otg_hcd_t *_hcd,
++ dwc_hc_t *_hc,
++ dwc_otg_hc_regs_t *_hc_regs,
++ dwc_otg_qtd_t *_qtd,
++ dwc_otg_halt_status_e _halt_status)
++{
++ struct urb *urb = _qtd->urb;
++ dwc_otg_halt_status_e ret_val = _halt_status;
++ struct usb_iso_packet_descriptor *frame_desc;
++
++ frame_desc = &urb->iso_frame_desc[_qtd->isoc_frame_index];
++ switch (_halt_status) {
++ case DWC_OTG_HC_XFER_COMPLETE:
++ frame_desc->status = 0;
++ frame_desc->actual_length =
++ get_actual_xfer_length(_hc, _hc_regs, _qtd,
++ _halt_status, NULL);
++ break;
++ case DWC_OTG_HC_XFER_FRAME_OVERRUN:
++ urb->error_count++;
++ if (_hc->ep_is_in) {
++ frame_desc->status = -ENOSR;
++ } else {
++ frame_desc->status = -ECOMM;
++ }
++ frame_desc->actual_length = 0;
++ break;
++ case DWC_OTG_HC_XFER_BABBLE_ERR:
++ urb->error_count++;
++ frame_desc->status = -EOVERFLOW;
++ /* Don't need to update actual_length in this case. */
++ break;
++ case DWC_OTG_HC_XFER_XACT_ERR:
++ urb->error_count++;
++ frame_desc->status = -EPROTO;
++ frame_desc->actual_length =
++ get_actual_xfer_length(_hc, _hc_regs, _qtd,
++ _halt_status, NULL);
++ default:
++ DWC_ERROR("%s: Unhandled _halt_status (%d)\n", __func__,
++ _halt_status);
++ BUG();
++ break;
++ }
++
++ if (++_qtd->isoc_frame_index == urb->number_of_packets) {
++ /*
++ * urb->status is not used for isoc transfers.
++ * The individual frame_desc statuses are used instead.
++ */
++ dwc_otg_hcd_complete_urb(_hcd, urb, 0);
++ ret_val = DWC_OTG_HC_XFER_URB_COMPLETE;
++ } else {
++ ret_val = DWC_OTG_HC_XFER_COMPLETE;
++ }
++
++ return ret_val;
++}
++
++/**
++ * Releases a host channel for use by other transfers. Attempts to select and
++ * queue more transactions since at least one host channel is available.
++ *
++ * @param _hcd The HCD state structure.
++ * @param _hc The host channel to release.
++ * @param _qtd The QTD associated with the host channel. This QTD may be freed
++ * if the transfer is complete or an error has occurred.
++ * @param _halt_status Reason the channel is being released. This status
++ * determines the actions taken by this function.
++ */
++static void release_channel(dwc_otg_hcd_t *_hcd,
++ dwc_hc_t *_hc,
++ dwc_otg_qtd_t *_qtd,
++ dwc_otg_halt_status_e _halt_status,
++ int *must_free)
++{
++ dwc_otg_transaction_type_e tr_type;
++ int free_qtd;
++ dwc_otg_qh_t * _qh;
++ int deact = 1;
++ int retry_delay = 1;
++ unsigned long flags;
++
++ DWC_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status %d\n", __func__,
++ _hc->hc_num, _halt_status);
++
++ switch (_halt_status) {
++ case DWC_OTG_HC_XFER_NYET:
++ case DWC_OTG_HC_XFER_NAK:
++ if (_halt_status == DWC_OTG_HC_XFER_NYET) {
++ retry_delay = nyet_deferral_delay;
++ } else {
++ retry_delay = nak_deferral_delay;
++ }
++ free_qtd = 0;
++ if (deferral_on && _hc->do_split) {
++ _qh = _hc->qh;
++ if (_qh) {
++ deact = dwc_otg_hcd_qh_deferr(_hcd, _qh , retry_delay);
++ }
++ }
++ break;
++ case DWC_OTG_HC_XFER_URB_COMPLETE:
++ free_qtd = 1;
++ break;
++ case DWC_OTG_HC_XFER_AHB_ERR:
++ case DWC_OTG_HC_XFER_STALL:
++ case DWC_OTG_HC_XFER_BABBLE_ERR:
++ free_qtd = 1;
++ break;
++ case DWC_OTG_HC_XFER_XACT_ERR:
++ if (_qtd->error_count >= 3) {
++ DWC_DEBUGPL(DBG_HCDV, " Complete URB with transaction error\n");
++ free_qtd = 1;
++ //_qtd->urb->status = -EPROTO;
++ dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EPROTO);
++ } else {
++ free_qtd = 0;
++ }
++ break;
++ case DWC_OTG_HC_XFER_URB_DEQUEUE:
++ /*
++ * The QTD has already been removed and the QH has been
++ * deactivated. Don't want to do anything except release the
++ * host channel and try to queue more transfers.
++ */
++ goto cleanup;
++ case DWC_OTG_HC_XFER_NO_HALT_STATUS:
++ DWC_ERROR("%s: No halt_status, channel %d\n", __func__, _hc->hc_num);
++ free_qtd = 0;
++ break;
++ default:
++ free_qtd = 0;
++ break;
++ }
++ if (free_qtd) {
++ /* Only change must_free to true (do not set to zero here -- it is
++ * pre-initialized to zero).
++ */
++ *must_free = 1;
++ }
++ if (deact) {
++ deactivate_qh(_hcd, _hc->qh, free_qtd);
++ }
++ cleanup:
++ /*
++ * Release the host channel for use by other transfers. The cleanup
++ * function clears the channel interrupt enables and conditions, so
++ * there's no need to clear the Channel Halted interrupt separately.
++ */
++ dwc_otg_hc_cleanup(_hcd->core_if, _hc);
++ list_add_tail(&_hc->hc_list_entry, &_hcd->free_hc_list);
++
++ local_irq_save(flags);
++ _hcd->available_host_channels++;
++ local_irq_restore(flags);
++ /* Try to queue more transfers now that there's a free channel, */
++ /* unless erratum_usb09_patched is set */
++ if (!erratum_usb09_patched) {
++ tr_type = dwc_otg_hcd_select_transactions(_hcd);
++ if (tr_type != DWC_OTG_TRANSACTION_NONE) {
++ dwc_otg_hcd_queue_transactions(_hcd, tr_type);
++ }
++ }
++}
++
++/**
++ * Halts a host channel. If the channel cannot be halted immediately because
++ * the request queue is full, this function ensures that the FIFO empty
++ * interrupt for the appropriate queue is enabled so that the halt request can
++ * be queued when there is space in the request queue.
++ *
++ * This function may also be called in DMA mode. In that case, the channel is
++ * simply released since the core always halts the channel automatically in
++ * DMA mode.
++ */
++static void halt_channel(dwc_otg_hcd_t *_hcd,
++ dwc_hc_t *_hc,
++ dwc_otg_qtd_t *_qtd,
++ dwc_otg_halt_status_e _halt_status, int *must_free)
++{
++ if (_hcd->core_if->dma_enable) {
++ release_channel(_hcd, _hc, _qtd, _halt_status, must_free);
++ return;
++ }
++
++ /* Slave mode processing... */
++ dwc_otg_hc_halt(_hcd->core_if, _hc, _halt_status);
++
++ if (_hc->halt_on_queue) {
++ gintmsk_data_t gintmsk = {.d32 = 0};
++ dwc_otg_core_global_regs_t *global_regs;
++ global_regs = _hcd->core_if->core_global_regs;
++
++ if (_hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
++ _hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
++ /*
++ * Make sure the Non-periodic Tx FIFO empty interrupt
++ * is enabled so that the non-periodic schedule will
++ * be processed.
++ */
++ gintmsk.b.nptxfempty = 1;
++ dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32);
++ } else {
++ /*
++ * Move the QH from the periodic queued schedule to
++ * the periodic assigned schedule. This allows the
++ * halt to be queued when the periodic schedule is
++ * processed.
++ */
++ list_move(&_hc->qh->qh_list_entry,
++ &_hcd->periodic_sched_assigned);
++
++ /*
++ * Make sure the Periodic Tx FIFO Empty interrupt is
++ * enabled so that the periodic schedule will be
++ * processed.
++ */
++ gintmsk.b.ptxfempty = 1;
++ dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32);
++ }
++ }
++}
++
++/**
++ * Performs common cleanup for non-periodic transfers after a Transfer
++ * Complete interrupt. This function should be called after any endpoint type
++ * specific handling is finished to release the host channel.
++ */
++static void complete_non_periodic_xfer(dwc_otg_hcd_t *_hcd,
++ dwc_hc_t *_hc,
++ dwc_otg_hc_regs_t *_hc_regs,
++ dwc_otg_qtd_t *_qtd,
++ dwc_otg_halt_status_e _halt_status, int *must_free)
++{
++ hcint_data_t hcint;
++
++ _qtd->error_count = 0;
++
++ hcint.d32 = dwc_read_reg32(&_hc_regs->hcint);
++ if (hcint.b.nyet) {
++ /*
++ * Got a NYET on the last transaction of the transfer. This
++ * means that the endpoint should be in the PING state at the
++ * beginning of the next transfer.
++ */
++ _hc->qh->ping_state = 1;
++ clear_hc_int(_hc_regs,nyet);
++ }
++
++ /*
++ * Always halt and release the host channel to make it available for
++ * more transfers. There may still be more phases for a control
++ * transfer or more data packets for a bulk transfer at this point,
++ * but the host channel is still halted. A channel will be reassigned
++ * to the transfer when the non-periodic schedule is processed after
++ * the channel is released. This allows transactions to be queued
++ * properly via dwc_otg_hcd_queue_transactions, which also enables the
++ * Tx FIFO Empty interrupt if necessary.
++ */
++ if (_hc->ep_is_in) {
++ /*
++ * IN transfers in Slave mode require an explicit disable to
++ * halt the channel. (In DMA mode, this call simply releases
++ * the channel.)
++ */
++ halt_channel(_hcd, _hc, _qtd, _halt_status, must_free);
++ } else {
++ /*
++ * The channel is automatically disabled by the core for OUT
++ * transfers in Slave mode.
++ */
++ release_channel(_hcd, _hc, _qtd, _halt_status, must_free);
++ }
++}
++
++/**
++ * Performs common cleanup for periodic transfers after a Transfer Complete
++ * interrupt. This function should be called after any endpoint type specific
++ * handling is finished to release the host channel.
++ */
++static void complete_periodic_xfer(dwc_otg_hcd_t *_hcd,
++ dwc_hc_t *_hc,
++ dwc_otg_hc_regs_t *_hc_regs,
++ dwc_otg_qtd_t *_qtd,
++ dwc_otg_halt_status_e _halt_status, int *must_free)
++{
++ hctsiz_data_t hctsiz;
++ _qtd->error_count = 0;
++
++ hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
++ if (!_hc->ep_is_in || hctsiz.b.pktcnt == 0) {
++ /* Core halts channel in these cases. */
++ release_channel(_hcd, _hc, _qtd, _halt_status, must_free);
++ } else {
++ /* Flush any outstanding requests from the Tx queue. */
++ halt_channel(_hcd, _hc, _qtd, _halt_status, must_free);
++ }
++}
++
++/**
++ * Handles a host channel Transfer Complete interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t *_hcd,
++ dwc_hc_t *_hc,
++ dwc_otg_hc_regs_t *_hc_regs,
++ dwc_otg_qtd_t *_qtd, int *must_free)
++{
++ int urb_xfer_done;
++ dwc_otg_halt_status_e halt_status = DWC_OTG_HC_XFER_COMPLETE;
++ struct urb *urb = _qtd->urb;
++ int pipe_type = usb_pipetype(urb->pipe);
++ int status = -EINPROGRESS;
++
++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++ "Transfer Complete--\n", _hc->hc_num);
++
++ /*
++ * Handle xfer complete on CSPLIT.
++ */
++ if (_hc->qh->do_split) {
++ _qtd->complete_split = 0;
++ }
++
++ /* Update the QTD and URB states. */
++ switch (pipe_type) {
++ case PIPE_CONTROL:
++ switch (_qtd->control_phase) {
++ case DWC_OTG_CONTROL_SETUP:
++ if (urb->transfer_buffer_length > 0) {
++ _qtd->control_phase = DWC_OTG_CONTROL_DATA;
++ } else {
++ _qtd->control_phase = DWC_OTG_CONTROL_STATUS;
++ }
++ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction done\n");
++ halt_status = DWC_OTG_HC_XFER_COMPLETE;
++ break;
++ case DWC_OTG_CONTROL_DATA: {
++ urb_xfer_done = update_urb_state_xfer_comp(_hc, _hc_regs,urb, _qtd, &status);
++ if (urb_xfer_done) {
++ _qtd->control_phase = DWC_OTG_CONTROL_STATUS;
++ DWC_DEBUGPL(DBG_HCDV, " Control data transfer done\n");
++ } else {
++ save_data_toggle(_hc, _hc_regs, _qtd);
++ }
++ halt_status = DWC_OTG_HC_XFER_COMPLETE;
++ break;
++ }
++ case DWC_OTG_CONTROL_STATUS:
++ DWC_DEBUGPL(DBG_HCDV, " Control transfer complete\n");
++ if (status == -EINPROGRESS) {
++ status = 0;
++ }
++ dwc_otg_hcd_complete_urb(_hcd, urb, status);
++ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
++ break;
++ }
++
++ complete_non_periodic_xfer(_hcd, _hc, _hc_regs, _qtd,
++ halt_status, must_free);
++ break;
++ case PIPE_BULK:
++ DWC_DEBUGPL(DBG_HCDV, " Bulk transfer complete\n");
++ urb_xfer_done = update_urb_state_xfer_comp(_hc, _hc_regs, urb, _qtd, &status);
++ if (urb_xfer_done) {
++ dwc_otg_hcd_complete_urb(_hcd, urb, status);
++ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
++ } else {
++ halt_status = DWC_OTG_HC_XFER_COMPLETE;
++ }
++
++ save_data_toggle(_hc, _hc_regs, _qtd);
++ complete_non_periodic_xfer(_hcd, _hc, _hc_regs, _qtd,halt_status, must_free);
++ break;
++ case PIPE_INTERRUPT:
++ DWC_DEBUGPL(DBG_HCDV, " Interrupt transfer complete\n");
++ update_urb_state_xfer_comp(_hc, _hc_regs, urb, _qtd, &status);
++
++ /*
++ * Interrupt URB is done on the first transfer complete
++ * interrupt.
++ */
++ dwc_otg_hcd_complete_urb(_hcd, urb, status);
++ save_data_toggle(_hc, _hc_regs, _qtd);
++ complete_periodic_xfer(_hcd, _hc, _hc_regs, _qtd,
++ DWC_OTG_HC_XFER_URB_COMPLETE, must_free);
++ break;
++ case PIPE_ISOCHRONOUS:
++ DWC_DEBUGPL(DBG_HCDV, " Isochronous transfer complete\n");
++ if (_qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL)
++ {
++ halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd,
++ DWC_OTG_HC_XFER_COMPLETE);
++ }
++ complete_periodic_xfer(_hcd, _hc, _hc_regs, _qtd, halt_status, must_free);
++ break;
++ }
++
++ disable_hc_int(_hc_regs,xfercompl);
++
++ return 1;
++}
++
++/**
++ * Handles a host channel STALL interrupt. This handler may be called in
++ * either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_stall_intr(dwc_otg_hcd_t *_hcd,
++ dwc_hc_t *_hc,
++ dwc_otg_hc_regs_t *_hc_regs,
++ dwc_otg_qtd_t *_qtd, int *must_free)
++{
++ struct urb *urb = _qtd->urb;
++ int pipe_type = usb_pipetype(urb->pipe);
++
++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++ "STALL Received--\n", _hc->hc_num);
++
++ if (pipe_type == PIPE_CONTROL) {
++ dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EPIPE);
++ }
++
++ if (pipe_type == PIPE_BULK || pipe_type == PIPE_INTERRUPT) {
++ dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EPIPE);
++ /*
++ * USB protocol requires resetting the data toggle for bulk
++ * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT)
++ * setup command is issued to the endpoint. Anticipate the
++ * CLEAR_FEATURE command since a STALL has occurred and reset
++ * the data toggle now.
++ */
++ _hc->qh->data_toggle = 0;
++ }
++
++ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_STALL, must_free);
++ disable_hc_int(_hc_regs,stall);
++
++ return 1;
++}
++
++/*
++ * Updates the state of the URB when a transfer has been stopped due to an
++ * abnormal condition before the transfer completes. Modifies the
++ * actual_length field of the URB to reflect the number of bytes that have
++ * actually been transferred via the host channel.
++ */
++static void update_urb_state_xfer_intr(dwc_hc_t *_hc,
++ dwc_otg_hc_regs_t *_hc_regs,
++ struct urb *_urb,
++ dwc_otg_qtd_t *_qtd,
++ dwc_otg_halt_status_e _halt_status)
++{
++ uint32_t bytes_transferred = get_actual_xfer_length(_hc, _hc_regs, _qtd,
++ _halt_status, NULL);
++ _urb->actual_length += bytes_transferred;
++
++#ifdef DEBUG
++ {
++ hctsiz_data_t hctsiz;
++ hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
++ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
++ __func__, (_hc->ep_is_in ? "IN" : "OUT"), _hc->hc_num);
++ DWC_DEBUGPL(DBG_HCDV, " _hc->start_pkt_count %d\n", _hc->start_pkt_count);
++ DWC_DEBUGPL(DBG_HCDV, " hctsiz.pktcnt %d\n", hctsiz.b.pktcnt);
++ DWC_DEBUGPL(DBG_HCDV, " _hc->max_packet %d\n", _hc->max_packet);
++ DWC_DEBUGPL(DBG_HCDV, " bytes_transferred %d\n", bytes_transferred);
++ DWC_DEBUGPL(DBG_HCDV, " _urb->actual_length %d\n", _urb->actual_length);
++ DWC_DEBUGPL(DBG_HCDV, " _urb->transfer_buffer_length %d\n",
++ _urb->transfer_buffer_length);
++ }
++#endif
++}
++
++/**
++ * Handles a host channel NAK interrupt. This handler may be called in either
++ * DMA mode or Slave mode.
++ */
++static int32_t handle_hc_nak_intr(dwc_otg_hcd_t *_hcd,
++ dwc_hc_t *_hc,
++ dwc_otg_hc_regs_t *_hc_regs,
++ dwc_otg_qtd_t *_qtd, int *must_free)
++{
++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++ "NAK Received--\n", _hc->hc_num);
++
++ /*
++ * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and
++ * interrupt. Re-start the SSPLIT transfer.
++ */
++ if (_hc->do_split) {
++ if (_hc->complete_split) {
++ _qtd->error_count = 0;
++ }
++ _qtd->complete_split = 0;
++ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NAK, must_free);
++ goto handle_nak_done;
++ }
++
++ switch (usb_pipetype(_qtd->urb->pipe)) {
++ case PIPE_CONTROL:
++ case PIPE_BULK:
++ if (_hcd->core_if->dma_enable && _hc->ep_is_in) {
++ /*
++ * NAK interrupts are enabled on bulk/control IN
++ * transfers in DMA mode for the sole purpose of
++ * resetting the error count after a transaction error
++ * occurs. The core will continue transferring data.
++ */
++ _qtd->error_count = 0;
++ goto handle_nak_done;
++ }
++
++ /*
++ * NAK interrupts normally occur during OUT transfers in DMA
++ * or Slave mode. For IN transfers, more requests will be
++ * queued as request queue space is available.
++ */
++ _qtd->error_count = 0;
++
++ if (!_hc->qh->ping_state) {
++ update_urb_state_xfer_intr(_hc, _hc_regs, _qtd->urb,
++ _qtd, DWC_OTG_HC_XFER_NAK);
++ save_data_toggle(_hc, _hc_regs, _qtd);
++ if (_qtd->urb->dev->speed == USB_SPEED_HIGH) {
++ _hc->qh->ping_state = 1;
++ }
++ }
++
++ /*
++ * Halt the channel so the transfer can be re-started from
++ * the appropriate point or the PING protocol will
++ * start/continue.
++ */
++ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NAK, must_free);
++ break;
++ case PIPE_INTERRUPT:
++ _qtd->error_count = 0;
++ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NAK, must_free);
++ break;
++ case PIPE_ISOCHRONOUS:
++ /* Should never get called for isochronous transfers. */
++ BUG();
++ break;
++ }
++
++ handle_nak_done:
++ disable_hc_int(_hc_regs,nak);
++
++ return 1;
++}
++
++/**
++ * Handles a host channel ACK interrupt. This interrupt is enabled when
++ * performing the PING protocol in Slave mode, when errors occur during
++ * either Slave mode or DMA mode, and during Start Split transactions.
++ */
++static int32_t handle_hc_ack_intr(dwc_otg_hcd_t *_hcd,
++ dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
++{
++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++ "ACK Received--\n", _hc->hc_num);
++
++ if (_hc->do_split) {
++ /*
++ * Handle ACK on SSPLIT.
++ * ACK should not occur in CSPLIT.
++ */
++ if ((!_hc->ep_is_in) && (_hc->data_pid_start != DWC_OTG_HC_PID_SETUP)) {
++ _qtd->ssplit_out_xfer_count = _hc->xfer_len;
++ }
++ if (!(_hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !_hc->ep_is_in)) {
++ /* Don't need complete for isochronous out transfers. */
++ _qtd->complete_split = 1;
++ }
++
++ /* ISOC OUT */
++ if ((_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && !_hc->ep_is_in) {
++ switch (_hc->xact_pos) {
++ case DWC_HCSPLIT_XACTPOS_ALL:
++ break;
++ case DWC_HCSPLIT_XACTPOS_END:
++ _qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
++ _qtd->isoc_split_offset = 0;
++ break;
++ case DWC_HCSPLIT_XACTPOS_BEGIN:
++ case DWC_HCSPLIT_XACTPOS_MID:
++ /*
++ * For BEGIN or MID, calculate the length for
++ * the next microframe to determine the correct
++ * SSPLIT token, either MID or END.
++ */
++ do {
++ struct usb_iso_packet_descriptor *frame_desc;
++
++ frame_desc = &_qtd->urb->iso_frame_desc[_qtd->isoc_frame_index];
++ _qtd->isoc_split_offset += 188;
++
++ if ((frame_desc->length - _qtd->isoc_split_offset) <= 188) {
++ _qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_END;
++ }
++ else {
++ _qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_MID;
++ }
++
++ } while(0);
++ break;
++ }
++ } else {
++ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_ACK, must_free);
++ }
++ } else {
++ _qtd->error_count = 0;
++
++ if (_hc->qh->ping_state) {
++ _hc->qh->ping_state = 0;
++ /*
++ * Halt the channel so the transfer can be re-started
++ * from the appropriate point. This only happens in
++ * Slave mode. In DMA mode, the ping_state is cleared
++ * when the transfer is started because the core
++ * automatically executes the PING, then the transfer.
++ */
++ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_ACK, must_free);
++ } else {
++ halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
++ }
++ }
++
++ /*
++ * If the ACK occurred when _not_ in the PING state, let the channel
++ * continue transferring data after clearing the error count.
++ */
++
++ disable_hc_int(_hc_regs,ack);
++
++ return 1;
++}
++
++/**
++ * Handles a host channel NYET interrupt. This interrupt should only occur on
++ * Bulk and Control OUT endpoints and for complete split transactions. If a
++ * NYET occurs at the same time as a Transfer Complete interrupt, it is
++ * handled in the xfercomp interrupt handler, not here. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t *_hcd,
++ dwc_hc_t *_hc,
++ dwc_otg_hc_regs_t *_hc_regs,
++ dwc_otg_qtd_t *_qtd, int *must_free)
++{
++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++ "NYET Received--\n", _hc->hc_num);
++
++ /*
++ * NYET on CSPLIT
++ * re-do the CSPLIT immediately on non-periodic
++ */
++ if ((_hc->do_split) && (_hc->complete_split)) {
++ if ((_hc->ep_type == DWC_OTG_EP_TYPE_INTR) ||
++ (_hc->ep_type == DWC_OTG_EP_TYPE_ISOC)) {
++ int frnum = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(_hcd));
++
++ if (dwc_full_frame_num(frnum) !=
++ dwc_full_frame_num(_hc->qh->sched_frame)) {
++ /*
++ * No longer in the same full speed frame.
++ * Treat this as a transaction error.
++ */
++#if 0
++ /** @todo Fix system performance so this can
++ * be treated as an error. Right now complete
++ * splits cannot be scheduled precisely enough
++ * due to other system activity, so this error
++ * occurs regularly in Slave mode.
++ */
++ _qtd->error_count++;
++#endif
++ _qtd->complete_split = 0;
++ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_XACT_ERR, must_free);
++ /** @todo add support for isoc release */
++ goto handle_nyet_done;
++ }
++ }
++
++ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NYET, must_free);
++ goto handle_nyet_done;
++ }
++
++ _hc->qh->ping_state = 1;
++ _qtd->error_count = 0;
++
++ update_urb_state_xfer_intr(_hc, _hc_regs, _qtd->urb, _qtd,
++ DWC_OTG_HC_XFER_NYET);
++ save_data_toggle(_hc, _hc_regs, _qtd);
++
++ /*
++ * Halt the channel and re-start the transfer so the PING
++ * protocol will start.
++ */
++ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NYET, must_free);
++
++handle_nyet_done:
++ disable_hc_int(_hc_regs,nyet);
++ clear_hc_int(_hc_regs, nyet);
++ return 1;
++}
++
++/**
++ * Handles a host channel babble interrupt. This handler may be called in
++ * either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_babble_intr(dwc_otg_hcd_t *_hcd,
++ dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
++{
++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++ "Babble Error--\n", _hc->hc_num);
++ if (_hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
++ dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EOVERFLOW);
++ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_BABBLE_ERR, must_free);
++ } else {
++ dwc_otg_halt_status_e halt_status;
++ halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd,
++ DWC_OTG_HC_XFER_BABBLE_ERR);
++ halt_channel(_hcd, _hc, _qtd, halt_status, must_free);
++ }
++ disable_hc_int(_hc_regs,bblerr);
++ return 1;
++}
++
++/**
++ * Handles a host channel AHB error interrupt. This handler is only called in
++ * DMA mode.
++ */
++static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t *_hcd,
++ dwc_hc_t *_hc,
++ dwc_otg_hc_regs_t *_hc_regs,
++ dwc_otg_qtd_t *_qtd)
++{
++ hcchar_data_t hcchar;
++ hcsplt_data_t hcsplt;
++ hctsiz_data_t hctsiz;
++ uint32_t hcdma;
++ struct urb *urb = _qtd->urb;
++
++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++ "AHB Error--\n", _hc->hc_num);
++
++ hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar);
++ hcsplt.d32 = dwc_read_reg32(&_hc_regs->hcsplt);
++ hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
++ hcdma = dwc_read_reg32(&_hc_regs->hcdma);
++
++ DWC_ERROR("AHB ERROR, Channel %d\n", _hc->hc_num);
++ DWC_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
++ DWC_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n");
++ DWC_ERROR(" Device address: %d\n", usb_pipedevice(urb->pipe));
++ DWC_ERROR(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
++ (usb_pipein(urb->pipe) ? "IN" : "OUT"));
++ DWC_ERROR(" Endpoint type: %s\n",
++ ({char *pipetype;
++ switch (usb_pipetype(urb->pipe)) {
++ case PIPE_CONTROL: pipetype = "CONTROL"; break;
++ case PIPE_BULK: pipetype = "BULK"; break;
++ case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
++ case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
++ default: pipetype = "UNKNOWN"; break;
++ }; pipetype;}));
++ DWC_ERROR(" Speed: %s\n",
++ ({char *speed;
++ switch (urb->dev->speed) {
++ case USB_SPEED_HIGH: speed = "HIGH"; break;
++ case USB_SPEED_FULL: speed = "FULL"; break;
++ case USB_SPEED_LOW: speed = "LOW"; break;
++ default: speed = "UNKNOWN"; break;
++ }; speed;}));
++ DWC_ERROR(" Max packet size: %d\n",
++ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
++ DWC_ERROR(" Data buffer length: %d\n", urb->transfer_buffer_length);
++ DWC_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n",
++ urb->transfer_buffer, (void *)(u32)urb->transfer_dma);
++ DWC_ERROR(" Setup buffer: %p, Setup DMA: %p\n",
++ urb->setup_packet, (void *)(u32)urb->setup_dma);
++ DWC_ERROR(" Interval: %d\n", urb->interval);
++
++ dwc_otg_hcd_complete_urb(_hcd, urb, -EIO);
++
++ /*
++ * Force a channel halt. Don't call halt_channel because that won't
++ * write to the HCCHARn register in DMA mode to force the halt.
++ */
++ dwc_otg_hc_halt(_hcd->core_if, _hc, DWC_OTG_HC_XFER_AHB_ERR);
++
++ disable_hc_int(_hc_regs,ahberr);
++ return 1;
++}
++
++/**
++ * Handles a host channel transaction error interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t *_hcd,
++ dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
++{
++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++ "Transaction Error--\n", _hc->hc_num);
++
++ switch (usb_pipetype(_qtd->urb->pipe)) {
++ case PIPE_CONTROL:
++ case PIPE_BULK:
++ _qtd->error_count++;
++ if (!_hc->qh->ping_state) {
++ update_urb_state_xfer_intr(_hc, _hc_regs, _qtd->urb,
++ _qtd, DWC_OTG_HC_XFER_XACT_ERR);
++ save_data_toggle(_hc, _hc_regs, _qtd);
++ if (!_hc->ep_is_in && _qtd->urb->dev->speed == USB_SPEED_HIGH) {
++ _hc->qh->ping_state = 1;
++ }
++ }
++
++ /*
++ * Halt the channel so the transfer can be re-started from
++ * the appropriate point or the PING protocol will start.
++ */
++ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_XACT_ERR, must_free);
++ break;
++ case PIPE_INTERRUPT:
++ _qtd->error_count++;
++ if ((_hc->do_split) && (_hc->complete_split)) {
++ _qtd->complete_split = 0;
++ }
++ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_XACT_ERR, must_free);
++ break;
++ case PIPE_ISOCHRONOUS:
++ {
++ dwc_otg_halt_status_e halt_status;
++ halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd,
++ DWC_OTG_HC_XFER_XACT_ERR);
++
++ halt_channel(_hcd, _hc, _qtd, halt_status, must_free);
++ }
++ break;
++ }
++
++
++ disable_hc_int(_hc_regs,xacterr);
++
++ return 1;
++}
++
++/**
++ * Handles a host channel frame overrun interrupt. This handler may be called
++ * in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t *_hcd,
++ dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
++{
++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++ "Frame Overrun--\n", _hc->hc_num);
++
++ switch (usb_pipetype(_qtd->urb->pipe)) {
++ case PIPE_CONTROL:
++ case PIPE_BULK:
++ break;
++ case PIPE_INTERRUPT:
++ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN, must_free);
++ break;
++ case PIPE_ISOCHRONOUS:
++ {
++ dwc_otg_halt_status_e halt_status;
++ halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd,
++ DWC_OTG_HC_XFER_FRAME_OVERRUN);
++
++ halt_channel(_hcd, _hc, _qtd, halt_status, must_free);
++ }
++ break;
++ }
++
++ disable_hc_int(_hc_regs,frmovrun);
++
++ return 1;
++}
++
++/**
++ * Handles a host channel data toggle error interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t *_hcd,
++ dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
++{
++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++ "Data Toggle Error--\n", _hc->hc_num);
++
++ if (_hc->ep_is_in) {
++ _qtd->error_count = 0;
++ } else {
++ DWC_ERROR("Data Toggle Error on OUT transfer,"
++ "channel %d\n", _hc->hc_num);
++ }
++
++ disable_hc_int(_hc_regs,datatglerr);
++
++ return 1;
++}
++
++#ifdef DEBUG
++/**
++ * This function is for debug only. It checks that a valid halt status is set
++ * and that HCCHARn.chdis is clear. If there's a problem, corrective action is
++ * taken and a warning is issued.
++ * @return 1 if halt status is ok, 0 otherwise.
++ */
++static inline int halt_status_ok(dwc_otg_hcd_t *_hcd,
++ dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
++{
++ hcchar_data_t hcchar;
++ hctsiz_data_t hctsiz;
++ hcint_data_t hcint;
++ hcintmsk_data_t hcintmsk;
++ hcsplt_data_t hcsplt;
++
++ if (_hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) {
++ /*
++ * This code is here only as a check. This condition should
++ * never happen. Ignore the halt if it does occur.
++ */
++ hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar);
++ hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
++ hcint.d32 = dwc_read_reg32(&_hc_regs->hcint);
++ hcintmsk.d32 = dwc_read_reg32(&_hc_regs->hcintmsk);
++ hcsplt.d32 = dwc_read_reg32(&_hc_regs->hcsplt);
++ DWC_WARN("%s: _hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS, "
++ "channel %d, hcchar 0x%08x, hctsiz 0x%08x, "
++ "hcint 0x%08x, hcintmsk 0x%08x, "
++ "hcsplt 0x%08x, qtd->complete_split %d\n",
++ __func__, _hc->hc_num, hcchar.d32, hctsiz.d32,
++ hcint.d32, hcintmsk.d32,
++ hcsplt.d32, _qtd->complete_split);
++
++ DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n",
++ __func__, _hc->hc_num);
++ DWC_WARN("\n");
++ clear_hc_int(_hc_regs,chhltd);
++ return 0;
++ }
++
++ /*
++ * This code is here only as a check. hcchar.chdis should
++ * never be set when the halt interrupt occurs. Halt the
++ * channel again if it does occur.
++ */
++ hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar);
++ if (hcchar.b.chdis) {
++ DWC_WARN("%s: hcchar.chdis set unexpectedly, "
++ "hcchar 0x%08x, trying to halt again\n",
++ __func__, hcchar.d32);
++ clear_hc_int(_hc_regs,chhltd);
++ _hc->halt_pending = 0;
++ halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
++ return 0;
++ }
++
++ return 1;
++}
++#endif
++
++/**
++ * Handles a host Channel Halted interrupt in DMA mode. This handler
++ * determines the reason the channel halted and proceeds accordingly.
++ */
++static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t *_hcd,
++ dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
++{
++ hcint_data_t hcint;
++ hcintmsk_data_t hcintmsk;
++
++ if (_hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
++ _hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
++ /*
++ * Just release the channel. A dequeue can happen on a
++ * transfer timeout. In the case of an AHB Error, the channel
++ * was forced to halt because there's no way to gracefully
++ * recover.
++ */
++ release_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
++ return;
++ }
++
++ /* Read the HCINTn register to determine the cause for the halt. */
++ hcint.d32 = dwc_read_reg32(&_hc_regs->hcint);
++ hcintmsk.d32 = dwc_read_reg32(&_hc_regs->hcintmsk);
++
++ if (hcint.b.xfercomp) {
++ /** @todo This is here because of a possible hardware bug. Spec
++ * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT
++ * interrupt w/ACK bit set should occur, but I only see the
++ * XFERCOMP bit, even with it masked out. This is a workaround
++ * for that behavior. Should fix this when hardware is fixed.
++ */
++ if ((_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && (!_hc->ep_is_in)) {
++ handle_hc_ack_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++ }
++ handle_hc_xfercomp_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++ } else if (hcint.b.stall) {
++ handle_hc_stall_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++ } else if (hcint.b.xacterr) {
++ /*
++ * Must handle xacterr before nak or ack. Could get a xacterr
++ * at the same time as either of these on a BULK/CONTROL OUT
++ * that started with a PING. The xacterr takes precedence.
++ */
++ handle_hc_xacterr_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++ } else if (hcint.b.nyet) {
++ /*
++ * Must handle nyet before nak or ack. Could get a nyet at the
++ * same time as either of those on a BULK/CONTROL OUT that
++ * started with a PING. The nyet takes precedence.
++ */
++ handle_hc_nyet_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++ } else if (hcint.b.bblerr) {
++ handle_hc_babble_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++ } else if (hcint.b.frmovrun) {
++ handle_hc_frmovrun_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++ } else if (hcint.b.datatglerr) {
++ handle_hc_datatglerr_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++ _hc->qh->data_toggle = 0;
++ halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
++ } else if (hcint.b.nak && !hcintmsk.b.nak) {
++ /*
++ * If nak is not masked, it's because a non-split IN transfer
++ * is in an error state. In that case, the nak is handled by
++ * the nak interrupt handler, not here. Handle nak here for
++ * BULK/CONTROL OUT transfers, which halt on a NAK to allow
++ * rewinding the buffer pointer.
++ */
++ handle_hc_nak_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++ } else if (hcint.b.ack && !hcintmsk.b.ack) {
++ /*
++ * If ack is not masked, it's because a non-split IN transfer
++ * is in an error state. In that case, the ack is handled by
++ * the ack interrupt handler, not here. Handle ack here for
++ * split transfers. Start splits halt on ACK.
++ */
++ handle_hc_ack_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
++ } else {
++ if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++ _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++ /*
++ * A periodic transfer halted with no other channel
++ * interrupts set. Assume it was halted by the core
++ * because it could not be completed in its scheduled
++ * (micro)frame.
++ */
++#ifdef DEBUG
++ DWC_PRINT("%s: Halt channel %d (assume incomplete periodic transfer)\n",
++ __func__, _hc->hc_num);
++#endif /* */
++ halt_channel(_hcd, _hc, _qtd,
++ DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE, must_free);
++ } else {
++#ifdef DEBUG
++ DWC_ERROR("%s: Channel %d, DMA Mode -- ChHltd set, but reason "
++ "for halting is unknown, nyet %d, hcint 0x%08x, intsts 0x%08x\n",
++ __func__, _hc->hc_num, hcint.b.nyet, hcint.d32,
++ dwc_read_reg32(&_hcd->core_if->core_global_regs->gintsts));
++#endif
++ halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
++ }
++ }
++}
++
++/**
++ * Handles a host channel Channel Halted interrupt.
++ *
++ * In slave mode, this handler is called only when the driver specifically
++ * requests a halt. This occurs during handling other host channel interrupts
++ * (e.g. nak, xacterr, stall, nyet, etc.).
++ *
++ * In DMA mode, this is the interrupt that occurs when the core has finished
++ * processing a transfer on a channel. Other host channel interrupts (except
++ * ahberr) are disabled in DMA mode.
++ */
++static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t *_hcd,
++ dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
++{
++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++ "Channel Halted--\n", _hc->hc_num);
++
++ if (_hcd->core_if->dma_enable) {
++ handle_hc_chhltd_intr_dma(_hcd, _hc, _hc_regs, _qtd, must_free);
++ } else {
++#ifdef DEBUG
++ if (!halt_status_ok(_hcd, _hc, _hc_regs, _qtd, must_free)) {
++ return 1;
++ }
++#endif /* */
++ release_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
++ }
++
++ return 1;
++}
++
++/** Handles interrupt for a specific Host Channel */
++int32_t dwc_otg_hcd_handle_hc_n_intr (dwc_otg_hcd_t *_dwc_otg_hcd, uint32_t _num)
++{
++ int must_free = 0;
++ int retval = 0;
++ hcint_data_t hcint;
++ hcintmsk_data_t hcintmsk;
++ dwc_hc_t *hc;
++ dwc_otg_hc_regs_t *hc_regs;
++ dwc_otg_qtd_t *qtd;
++
++ DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", _num);
++
++ hc = _dwc_otg_hcd->hc_ptr_array[_num];
++ hc_regs = _dwc_otg_hcd->core_if->host_if->hc_regs[_num];
++ qtd = list_entry(hc->qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
++
++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
++ hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
++ DWC_DEBUGPL(DBG_HCDV, " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
++ hcint.d32, hcintmsk.d32, (hcint.d32 & hcintmsk.d32));
++ hcint.d32 = hcint.d32 & hcintmsk.d32;
++
++ if (!_dwc_otg_hcd->core_if->dma_enable) {
++ if ((hcint.b.chhltd) && (hcint.d32 != 0x2)) {
++ hcint.b.chhltd = 0;
++ }
++ }
++
++ if (hcint.b.xfercomp) {
++ retval |= handle_hc_xfercomp_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++ /*
++ * If NYET occurred at same time as Xfer Complete, the NYET is
++ * handled by the Xfer Complete interrupt handler. Don't want
++ * to call the NYET interrupt handler in this case.
++ */
++ hcint.b.nyet = 0;
++ }
++ if (hcint.b.chhltd) {
++ retval |= handle_hc_chhltd_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++ }
++ if (hcint.b.ahberr) {
++ retval |= handle_hc_ahberr_intr(_dwc_otg_hcd, hc, hc_regs, qtd);
++ }
++ if (hcint.b.stall) {
++ retval |= handle_hc_stall_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++ }
++ if (hcint.b.nak) {
++ retval |= handle_hc_nak_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++ }
++ if (hcint.b.ack) {
++ retval |= handle_hc_ack_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++ }
++ if (hcint.b.nyet) {
++ retval |= handle_hc_nyet_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++ }
++ if (hcint.b.xacterr) {
++ retval |= handle_hc_xacterr_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++ }
++ if (hcint.b.bblerr) {
++ retval |= handle_hc_babble_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++ }
++ if (hcint.b.frmovrun) {
++ retval |= handle_hc_frmovrun_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++ }
++ if (hcint.b.datatglerr) {
++ retval |= handle_hc_datatglerr_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
++ }
++
++ /*
++ * Logic to free the qtd here, at the end of the hc intr
++ * processing, if the handling of this interrupt determined
++ * that it needs to be freed.
++ */
++ if (must_free) {
++ /* Free the qtd here now that we are done using it. */
++ dwc_otg_hcd_qtd_free(qtd);
++ }
++ return retval;
++}
++
++#endif /* DWC_DEVICE_ONLY */
+diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c b/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c
+new file mode 100644
+index 0000000..fcb5ce6
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c
+@@ -0,0 +1,794 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd_queue.c $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 537387 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++/**
++ * @file
++ *
++ * This file contains the functions to manage Queue Heads and Queue
++ * Transfer Descriptors.
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/string.h>
++
++#include "dwc_otg_driver.h"
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++
++/**
++ * This function allocates and initializes a QH.
++ *
++ * @param _hcd The HCD state structure for the DWC OTG controller.
++ * @param[in] _urb Holds the information about the device/endpoint that we need
++ * to initialize the QH.
++ *
++ * @return Returns pointer to the newly allocated QH, or NULL on error. */
++dwc_otg_qh_t *dwc_otg_hcd_qh_create (dwc_otg_hcd_t *_hcd, struct urb *_urb)
++{
++ dwc_otg_qh_t *qh;
++
++ /* Allocate memory */
++ /** @todo add memflags argument */
++ qh = dwc_otg_hcd_qh_alloc ();
++ if (qh == NULL) {
++ return NULL;
++ }
++
++ dwc_otg_hcd_qh_init (_hcd, qh, _urb);
++ return qh;
++}
++
++/** Free each QTD in the QH's QTD-list then free the QH. QH should already be
++ * removed from a list. QTD list should already be empty if called from URB
++ * Dequeue.
++ *
++ * @param[in] _qh The QH to free.
++ */
++void dwc_otg_hcd_qh_free (dwc_otg_qh_t *_qh)
++{
++ dwc_otg_qtd_t *qtd;
++ struct list_head *pos;
++ unsigned long flags;
++
++ /* Free each QTD in the QTD list */
++ local_irq_save (flags);
++ for (pos = _qh->qtd_list.next;
++ pos != &_qh->qtd_list;
++ pos = _qh->qtd_list.next)
++ {
++ list_del (pos);
++ qtd = dwc_list_to_qtd (pos);
++ dwc_otg_hcd_qtd_free (qtd);
++ }
++ local_irq_restore (flags);
++
++ kfree (_qh);
++ return;
++}
++
++/** Initializes a QH structure.
++ *
++ * @param[in] _hcd The HCD state structure for the DWC OTG controller.
++ * @param[in] _qh The QH to init.
++ * @param[in] _urb Holds the information about the device/endpoint that we need
++ * to initialize the QH. */
++#define SCHEDULE_SLOP 10
++void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, struct urb *_urb)
++{
++ memset (_qh, 0, sizeof (dwc_otg_qh_t));
++
++ /* Initialize QH */
++ switch (usb_pipetype(_urb->pipe)) {
++ case PIPE_CONTROL:
++ _qh->ep_type = USB_ENDPOINT_XFER_CONTROL;
++ break;
++ case PIPE_BULK:
++ _qh->ep_type = USB_ENDPOINT_XFER_BULK;
++ break;
++ case PIPE_ISOCHRONOUS:
++ _qh->ep_type = USB_ENDPOINT_XFER_ISOC;
++ break;
++ case PIPE_INTERRUPT:
++ _qh->ep_type = USB_ENDPOINT_XFER_INT;
++ break;
++ }
++
++ _qh->ep_is_in = usb_pipein(_urb->pipe) ? 1 : 0;
++
++ _qh->data_toggle = DWC_OTG_HC_PID_DATA0;
++ _qh->maxp = usb_maxpacket(_urb->dev, _urb->pipe, !(usb_pipein(_urb->pipe)));
++ INIT_LIST_HEAD(&_qh->qtd_list);
++ INIT_LIST_HEAD(&_qh->qh_list_entry);
++ _qh->channel = NULL;
++
++ /* FS/LS Enpoint on HS Hub
++ * NOT virtual root hub */
++ _qh->do_split = 0;
++ _qh->speed = _urb->dev->speed;
++ if (((_urb->dev->speed == USB_SPEED_LOW) ||
++ (_urb->dev->speed == USB_SPEED_FULL)) &&
++ (_urb->dev->tt) && (_urb->dev->tt->hub) && (_urb->dev->tt->hub->devnum != 1)) {
++ DWC_DEBUGPL(DBG_HCD, "QH init: EP %d: TT found at hub addr %d, for port %d\n",
++ usb_pipeendpoint(_urb->pipe), _urb->dev->tt->hub->devnum,
++ _urb->dev->ttport);
++ _qh->do_split = 1;
++ }
++
++ if (_qh->ep_type == USB_ENDPOINT_XFER_INT ||
++ _qh->ep_type == USB_ENDPOINT_XFER_ISOC) {
++ /* Compute scheduling parameters once and save them. */
++ hprt0_data_t hprt;
++
++ /** @todo Account for split transfers in the bus time. */
++ int bytecount = dwc_hb_mult(_qh->maxp) * dwc_max_packet(_qh->maxp);
++ _qh->usecs = NS_TO_US(usb_calc_bus_time(_urb->dev->speed,
++ usb_pipein(_urb->pipe),
++ (_qh->ep_type == USB_ENDPOINT_XFER_ISOC),bytecount));
++
++ /* Start in a slightly future (micro)frame. */
++ _qh->sched_frame = dwc_frame_num_inc(_hcd->frame_number, SCHEDULE_SLOP);
++ _qh->interval = _urb->interval;
++#if 0
++ /* Increase interrupt polling rate for debugging. */
++ if (_qh->ep_type == USB_ENDPOINT_XFER_INT) {
++ _qh->interval = 8;
++ }
++#endif
++ hprt.d32 = dwc_read_reg32(_hcd->core_if->host_if->hprt0);
++ if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) &&
++ ((_urb->dev->speed == USB_SPEED_LOW) ||
++ (_urb->dev->speed == USB_SPEED_FULL)))
++ {
++ _qh->interval *= 8;
++ _qh->sched_frame |= 0x7;
++ _qh->start_split_frame = _qh->sched_frame;
++ }
++ }
++
++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n");
++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - qh = %p\n", _qh);
++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Device Address = %d\n",
++ _urb->dev->devnum);
++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Endpoint %d, %s\n",
++ usb_pipeendpoint(_urb->pipe),
++ usb_pipein(_urb->pipe) == USB_DIR_IN ? "IN" : "OUT");
++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Speed = %s\n",
++ ({ char *speed; switch (_urb->dev->speed) {
++ case USB_SPEED_LOW: speed = "low"; break;
++ case USB_SPEED_FULL: speed = "full"; break;
++ case USB_SPEED_HIGH: speed = "high"; break;
++ default: speed = "?"; break;
++ }; speed;}));
++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Type = %s\n",
++ ({ char *type; switch (_qh->ep_type) {
++ case USB_ENDPOINT_XFER_ISOC: type = "isochronous"; break;
++ case USB_ENDPOINT_XFER_INT: type = "interrupt"; break;
++ case USB_ENDPOINT_XFER_CONTROL: type = "control"; break;
++ case USB_ENDPOINT_XFER_BULK: type = "bulk"; break;
++ default: type = "?"; break;
++ }; type;}));
++#ifdef DEBUG
++ if (_qh->ep_type == USB_ENDPOINT_XFER_INT) {
++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n",
++ _qh->usecs);
++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n",
++ _qh->interval);
++ }
++#endif
++
++ return;
++}
++
++/**
++ * Microframe scheduler
++ * track the total use in hcd->frame_usecs
++ * keep each qh use in qh->frame_usecs
++ * when surrendering the qh then donate the time back
++ */
++const unsigned short max_uframe_usecs[]={ 100, 100, 100, 100, 100, 100, 30, 0 };
++
++/*
++ * called from dwc_otg_hcd.c:dwc_otg_hcd_init
++ */
++int init_hcd_usecs(dwc_otg_hcd_t *_hcd)
++{
++ int i;
++ for (i=0; i<8; i++) {
++ _hcd->frame_usecs[i] = max_uframe_usecs[i];
++ }
++ return 0;
++}
++
++static int find_single_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
++{
++ int i;
++ unsigned short utime;
++ int t_left;
++ int ret;
++ int done;
++
++ ret = -1;
++ utime = _qh->usecs;
++ t_left = utime;
++ i = 0;
++ done = 0;
++ while (done == 0) {
++ /* At the start _hcd->frame_usecs[i] = max_uframe_usecs[i]; */
++ if (utime <= _hcd->frame_usecs[i]) {
++ _hcd->frame_usecs[i] -= utime;
++ _qh->frame_usecs[i] += utime;
++ t_left -= utime;
++ ret = i;
++ done = 1;
++ return ret;
++ } else {
++ i++;
++ if (i == 8) {
++ done = 1;
++ ret = -1;
++ }
++ }
++ }
++ return ret;
++}
++
++/*
++ * use this for FS apps that can span multiple uframes
++ */
++static int find_multi_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
++{
++ int i;
++ int j;
++ unsigned short utime;
++ int t_left;
++ int ret;
++ int done;
++ unsigned short xtime;
++
++ ret = -1;
++ utime = _qh->usecs;
++ t_left = utime;
++ i = 0;
++ done = 0;
++loop:
++ while (done == 0) {
++ if(_hcd->frame_usecs[i] <= 0) {
++ i++;
++ if (i == 8) {
++ done = 1;
++ ret = -1;
++ }
++ goto loop;
++ }
++
++ /*
++ * we need n consequtive slots
++ * so use j as a start slot j plus j+1 must be enough time (for now)
++ */
++ xtime= _hcd->frame_usecs[i];
++ for (j = i+1 ; j < 8 ; j++ ) {
++ /*
++ * if we add this frame remaining time to xtime we may
++ * be OK, if not we need to test j for a complete frame
++ */
++ if ((xtime+_hcd->frame_usecs[j]) < utime) {
++ if (_hcd->frame_usecs[j] < max_uframe_usecs[j]) {
++ j = 8;
++ ret = -1;
++ continue;
++ }
++ }
++ if (xtime >= utime) {
++ ret = i;
++ j = 8; /* stop loop with a good value ret */
++ continue;
++ }
++ /* add the frame time to x time */
++ xtime += _hcd->frame_usecs[j];
++ /* we must have a fully available next frame or break */
++ if ((xtime < utime)
++ && (_hcd->frame_usecs[j] == max_uframe_usecs[j])) {
++ ret = -1;
++ j = 8; /* stop loop with a bad value ret */
++ continue;
++ }
++ }
++ if (ret >= 0) {
++ t_left = utime;
++ for (j = i; (t_left>0) && (j < 8); j++ ) {
++ t_left -= _hcd->frame_usecs[j];
++ if ( t_left <= 0 ) {
++ _qh->frame_usecs[j] += _hcd->frame_usecs[j] + t_left;
++ _hcd->frame_usecs[j]= -t_left;
++ ret = i;
++ done = 1;
++ } else {
++ _qh->frame_usecs[j] += _hcd->frame_usecs[j];
++ _hcd->frame_usecs[j] = 0;
++ }
++ }
++ } else {
++ i++;
++ if (i == 8) {
++ done = 1;
++ ret = -1;
++ }
++ }
++ }
++ return ret;
++}
++
++static int find_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
++{
++ int ret;
++ ret = -1;
++
++ if (_qh->speed == USB_SPEED_HIGH) {
++ /* if this is a hs transaction we need a full frame */
++ ret = find_single_uframe(_hcd, _qh);
++ } else {
++ /* if this is a fs transaction we may need a sequence of frames */
++ ret = find_multi_uframe(_hcd, _qh);
++ }
++ return ret;
++}
++
++/**
++ * Checks that the max transfer size allowed in a host channel is large enough
++ * to handle the maximum data transfer in a single (micro)frame for a periodic
++ * transfer.
++ *
++ * @param _hcd The HCD state structure for the DWC OTG controller.
++ * @param _qh QH for a periodic endpoint.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++static int check_max_xfer_size(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
++{
++ int status;
++ uint32_t max_xfer_size;
++ uint32_t max_channel_xfer_size;
++
++ status = 0;
++
++ max_xfer_size = dwc_max_packet(_qh->maxp) * dwc_hb_mult(_qh->maxp);
++ max_channel_xfer_size = _hcd->core_if->core_params->max_transfer_size;
++
++ if (max_xfer_size > max_channel_xfer_size) {
++ DWC_NOTICE("%s: Periodic xfer length %d > "
++ "max xfer length for channel %d\n",
++ __func__, max_xfer_size, max_channel_xfer_size);
++ status = -ENOSPC;
++ }
++
++ return status;
++}
++
++/**
++ * Schedules an interrupt or isochronous transfer in the periodic schedule.
++ *
++ * @param _hcd The HCD state structure for the DWC OTG controller.
++ * @param _qh QH for the periodic transfer. The QH should already contain the
++ * scheduling information.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++static int schedule_periodic(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
++{
++ int status = 0;
++
++ int frame;
++ status = find_uframe(_hcd, _qh);
++ frame = -1;
++ if (status == 0) {
++ frame = 7;
++ } else {
++ if (status > 0 )
++ frame = status-1;
++ }
++
++ /* Set the new frame up */
++ if (frame > -1) {
++ _qh->sched_frame &= ~0x7;
++ _qh->sched_frame |= (frame & 7);
++ }
++
++ if (status != -1 )
++ status = 0;
++ if (status) {
++ DWC_NOTICE("%s: Insufficient periodic bandwidth for "
++ "periodic transfer.\n", __func__);
++ return status;
++ }
++
++ status = check_max_xfer_size(_hcd, _qh);
++ if (status) {
++ DWC_NOTICE("%s: Channel max transfer size too small "
++ "for periodic transfer.\n", __func__);
++ return status;
++ }
++
++ /* Always start in the inactive schedule. */
++ list_add_tail(&_qh->qh_list_entry, &_hcd->periodic_sched_inactive);
++
++
++ /* Update claimed usecs per (micro)frame. */
++ _hcd->periodic_usecs += _qh->usecs;
++
++ /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */
++ hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_allocated += _qh->usecs / _qh->interval;
++ if (_qh->ep_type == USB_ENDPOINT_XFER_INT) {
++ hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_int_reqs++;
++ DWC_DEBUGPL(DBG_HCD, "Scheduled intr: qh %p, usecs %d, period %d\n",
++ _qh, _qh->usecs, _qh->interval);
++ } else {
++ hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_isoc_reqs++;
++ DWC_DEBUGPL(DBG_HCD, "Scheduled isoc: qh %p, usecs %d, period %d\n",
++ _qh, _qh->usecs, _qh->interval);
++ }
++
++ return status;
++}
++
++/**
++ * This function adds a QH to either the non periodic or periodic schedule if
++ * it is not already in the schedule. If the QH is already in the schedule, no
++ * action is taken.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++int dwc_otg_hcd_qh_add (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
++{
++ unsigned long flags;
++ int status = 0;
++
++ local_irq_save(flags);
++
++ if (!list_empty(&_qh->qh_list_entry)) {
++ /* QH already in a schedule. */
++ goto done;
++ }
++
++ /* Add the new QH to the appropriate schedule */
++ if (dwc_qh_is_non_per(_qh)) {
++ /* Always start in the inactive schedule. */
++ list_add_tail(&_qh->qh_list_entry, &_hcd->non_periodic_sched_inactive);
++ } else {
++ status = schedule_periodic(_hcd, _qh);
++ }
++
++ done:
++ local_irq_restore(flags);
++
++ return status;
++}
++
++/**
++ * This function adds a QH to the non periodic deferred schedule.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++int dwc_otg_hcd_qh_add_deferred(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
++{
++ unsigned long flags;
++ local_irq_save(flags);
++ if (!list_empty(&_qh->qh_list_entry)) {
++ /* QH already in a schedule. */
++ goto done;
++ }
++
++ /* Add the new QH to the non periodic deferred schedule */
++ if (dwc_qh_is_non_per(_qh)) {
++ list_add_tail(&_qh->qh_list_entry,
++ &_hcd->non_periodic_sched_deferred);
++ }
++done:
++ local_irq_restore(flags);
++ return 0;
++}
++
++/**
++ * Removes an interrupt or isochronous transfer from the periodic schedule.
++ *
++ * @param _hcd The HCD state structure for the DWC OTG controller.
++ * @param _qh QH for the periodic transfer.
++ */
++static void deschedule_periodic(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
++{
++ int i;
++ list_del_init(&_qh->qh_list_entry);
++
++
++ /* Update claimed usecs per (micro)frame. */
++ _hcd->periodic_usecs -= _qh->usecs;
++
++ for (i = 0; i < 8; i++) {
++ _hcd->frame_usecs[i] += _qh->frame_usecs[i];
++ _qh->frame_usecs[i] = 0;
++ }
++ /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */
++ hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_allocated -= _qh->usecs / _qh->interval;
++
++ if (_qh->ep_type == USB_ENDPOINT_XFER_INT) {
++ hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_int_reqs--;
++ DWC_DEBUGPL(DBG_HCD, "Descheduled intr: qh %p, usecs %d, period %d\n",
++ _qh, _qh->usecs, _qh->interval);
++ } else {
++ hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_isoc_reqs--;
++ DWC_DEBUGPL(DBG_HCD, "Descheduled isoc: qh %p, usecs %d, period %d\n",
++ _qh, _qh->usecs, _qh->interval);
++ }
++}
++
++/**
++ * Removes a QH from either the non-periodic or periodic schedule. Memory is
++ * not freed.
++ *
++ * @param[in] _hcd The HCD state structure.
++ * @param[in] _qh QH to remove from schedule. */
++void dwc_otg_hcd_qh_remove (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
++{
++ unsigned long flags;
++
++ local_irq_save(flags);
++
++ if (list_empty(&_qh->qh_list_entry)) {
++ /* QH is not in a schedule. */
++ goto done;
++ }
++
++ if (dwc_qh_is_non_per(_qh)) {
++ if (_hcd->non_periodic_qh_ptr == &_qh->qh_list_entry) {
++ _hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next;
++ }
++ list_del_init(&_qh->qh_list_entry);
++ } else {
++ deschedule_periodic(_hcd, _qh);
++ }
++
++ done:
++ local_irq_restore(flags);
++}
++
++/**
++ * Defers a QH. For non-periodic QHs, removes the QH from the active
++ * non-periodic schedule. The QH is added to the deferred non-periodic
++ * schedule if any QTDs are still attached to the QH.
++ */
++int dwc_otg_hcd_qh_deferr(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh, int delay)
++{
++ int deact = 1;
++ unsigned long flags;
++ local_irq_save(flags);
++ if (dwc_qh_is_non_per(_qh)) {
++ _qh->sched_frame =
++ dwc_frame_num_inc(_hcd->frame_number,
++ delay);
++ _qh->channel = NULL;
++ _qh->qtd_in_process = NULL;
++ deact = 0;
++ dwc_otg_hcd_qh_remove(_hcd, _qh);
++ if (!list_empty(&_qh->qtd_list)) {
++ /* Add back to deferred non-periodic schedule. */
++ dwc_otg_hcd_qh_add_deferred(_hcd, _qh);
++ }
++ }
++ local_irq_restore(flags);
++ return deact;
++}
++
++/**
++ * Deactivates a QH. For non-periodic QHs, removes the QH from the active
++ * non-periodic schedule. The QH is added to the inactive non-periodic
++ * schedule if any QTDs are still attached to the QH.
++ *
++ * For periodic QHs, the QH is removed from the periodic queued schedule. If
++ * there are any QTDs still attached to the QH, the QH is added to either the
++ * periodic inactive schedule or the periodic ready schedule and its next
++ * scheduled frame is calculated. The QH is placed in the ready schedule if
++ * the scheduled frame has been reached already. Otherwise it's placed in the
++ * inactive schedule. If there are no QTDs attached to the QH, the QH is
++ * completely removed from the periodic schedule.
++ */
++void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, int sched_next_periodic_split)
++{
++ unsigned long flags;
++ local_irq_save(flags);
++
++ if (dwc_qh_is_non_per(_qh)) {
++ dwc_otg_hcd_qh_remove(_hcd, _qh);
++ if (!list_empty(&_qh->qtd_list)) {
++ /* Add back to inactive non-periodic schedule. */
++ dwc_otg_hcd_qh_add(_hcd, _qh);
++ }
++ } else {
++ uint16_t frame_number = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(_hcd));
++
++ if (_qh->do_split) {
++ /* Schedule the next continuing periodic split transfer */
++ if (sched_next_periodic_split) {
++
++ _qh->sched_frame = frame_number;
++ if (dwc_frame_num_le(frame_number,
++ dwc_frame_num_inc(_qh->start_split_frame, 1))) {
++ /*
++ * Allow one frame to elapse after start
++ * split microframe before scheduling
++ * complete split, but DONT if we are
++ * doing the next start split in the
++ * same frame for an ISOC out.
++ */
++ if ((_qh->ep_type != USB_ENDPOINT_XFER_ISOC) || (_qh->ep_is_in != 0)) {
++ _qh->sched_frame = dwc_frame_num_inc(_qh->sched_frame, 1);
++ }
++ }
++ } else {
++ _qh->sched_frame = dwc_frame_num_inc(_qh->start_split_frame,
++ _qh->interval);
++ if (dwc_frame_num_le(_qh->sched_frame, frame_number)) {
++ _qh->sched_frame = frame_number;
++ }
++ _qh->sched_frame |= 0x7;
++ _qh->start_split_frame = _qh->sched_frame;
++ }
++ } else {
++ _qh->sched_frame = dwc_frame_num_inc(_qh->sched_frame, _qh->interval);
++ if (dwc_frame_num_le(_qh->sched_frame, frame_number)) {
++ _qh->sched_frame = frame_number;
++ }
++ }
++
++ if (list_empty(&_qh->qtd_list)) {
++ dwc_otg_hcd_qh_remove(_hcd, _qh);
++ } else {
++ /*
++ * Remove from periodic_sched_queued and move to
++ * appropriate queue.
++ */
++ if (dwc_frame_num_le(_qh->sched_frame, frame_number)) {
++ list_move(&_qh->qh_list_entry,
++ &_hcd->periodic_sched_ready);
++ } else {
++ list_move(&_qh->qh_list_entry,
++ &_hcd->periodic_sched_inactive);
++ }
++ }
++ }
++
++ local_irq_restore(flags);
++}
++
++/**
++ * This function allocates and initializes a QTD.
++ *
++ * @param[in] _urb The URB to create a QTD from. Each URB-QTD pair will end up
++ * pointing to each other so each pair should have a unique correlation.
++ *
++ * @return Returns pointer to the newly allocated QTD, or NULL on error. */
++dwc_otg_qtd_t *dwc_otg_hcd_qtd_create (struct urb *_urb)
++{
++ dwc_otg_qtd_t *qtd;
++
++ qtd = dwc_otg_hcd_qtd_alloc ();
++ if (qtd == NULL) {
++ return NULL;
++ }
++
++ dwc_otg_hcd_qtd_init (qtd, _urb);
++ return qtd;
++}
++
++/**
++ * Initializes a QTD structure.
++ *
++ * @param[in] _qtd The QTD to initialize.
++ * @param[in] _urb The URB to use for initialization. */
++void dwc_otg_hcd_qtd_init (dwc_otg_qtd_t *_qtd, struct urb *_urb)
++{
++ memset (_qtd, 0, sizeof (dwc_otg_qtd_t));
++ _qtd->urb = _urb;
++ if (usb_pipecontrol(_urb->pipe)) {
++ /*
++ * The only time the QTD data toggle is used is on the data
++ * phase of control transfers. This phase always starts with
++ * DATA1.
++ */
++ _qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
++ _qtd->control_phase = DWC_OTG_CONTROL_SETUP;
++ }
++
++ /* start split */
++ _qtd->complete_split = 0;
++ _qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
++ _qtd->isoc_split_offset = 0;
++
++ /* Store the qtd ptr in the urb to reference what QTD. */
++ _urb->hcpriv = _qtd;
++ return;
++}
++
++/**
++ * This function adds a QTD to the QTD-list of a QH. It will find the correct
++ * QH to place the QTD into. If it does not find a QH, then it will create a
++ * new QH. If the QH to which the QTD is added is not currently scheduled, it
++ * is placed into the proper schedule based on its EP type.
++ *
++ * @param[in] _qtd The QTD to add
++ * @param[in] _dwc_otg_hcd The DWC HCD structure
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * _qtd, dwc_otg_hcd_t * _dwc_otg_hcd)
++{
++ struct usb_host_endpoint *ep;
++ dwc_otg_qh_t *qh;
++ unsigned long flags;
++ int retval = 0;
++ struct urb *urb = _qtd->urb;
++
++ local_irq_save(flags);
++
++ /*
++ * Get the QH which holds the QTD-list to insert to. Create QH if it
++ * doesn't exist.
++ */
++ ep = dwc_urb_to_endpoint(urb);
++ qh = (dwc_otg_qh_t *)ep->hcpriv;
++ if (qh == NULL) {
++ qh = dwc_otg_hcd_qh_create (_dwc_otg_hcd, urb);
++ if (qh == NULL) {
++ retval = -1;
++ goto done;
++ }
++ ep->hcpriv = qh;
++ }
++
++ _qtd->qtd_qh_ptr = qh;
++ retval = dwc_otg_hcd_qh_add(_dwc_otg_hcd, qh);
++ if (retval == 0) {
++ list_add_tail(&_qtd->qtd_list_entry, &qh->qtd_list);
++ }
++
++ done:
++ local_irq_restore(flags);
++ return retval;
++}
++
++#endif /* DWC_DEVICE_ONLY */
+diff --git a/drivers/usb/dwc_otg/dwc_otg_ifx.c b/drivers/usb/dwc_otg/dwc_otg_ifx.c
+new file mode 100644
+index 0000000..0a4c209
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_ifx.c
+@@ -0,0 +1,100 @@
++/******************************************************************************
++**
++** FILE NAME : dwc_otg_ifx.c
++** PROJECT : Twinpass/Danube
++** MODULES : DWC OTG USB
++**
++** DATE : 12 Auguest 2007
++** AUTHOR : Sung Winder
++** DESCRIPTION : Platform specific initialization.
++** COPYRIGHT : Copyright (c) 2007
++** Infineon Technologies AG
++** 2F, No.2, Li-Hsin Rd., Hsinchu Science Park,
++** Hsin-chu City, 300 Taiwan.
++**
++** This program is free software; you can redistribute it and/or modify
++** it under the terms of the GNU General Public License as published by
++** the Free Software Foundation; either version 2 of the License, or
++** (at your option) any later version.
++**
++** HISTORY
++** $Date $Author $Comment
++** 12 Auguest 2007 Sung Winder Initiate Version
++*******************************************************************************/
++#include "dwc_otg_ifx.h"
++
++#include <linux/platform_device.h>
++#include <linux/kernel.h>
++#include <linux/ioport.h>
++#include <linux/gpio.h>
++
++#include <asm/io.h>
++//#include <asm/mach-ifxmips/ifxmips.h>
++#include <lantiq_soc.h>
++
++#define IFXMIPS_GPIO_BASE_ADDR (0xBE100B00)
++
++#define IFXMIPS_GPIO_P0_OUT ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0010))
++#define IFXMIPS_GPIO_P1_OUT ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0040))
++#define IFXMIPS_GPIO_P0_IN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0014))
++#define IFXMIPS_GPIO_P1_IN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0044))
++#define IFXMIPS_GPIO_P0_DIR ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0018))
++#define IFXMIPS_GPIO_P1_DIR ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0048))
++#define IFXMIPS_GPIO_P0_ALTSEL0 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x001C))
++#define IFXMIPS_GPIO_P1_ALTSEL0 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x004C))
++#define IFXMIPS_GPIO_P0_ALTSEL1 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0020))
++#define IFXMIPS_GPIO_P1_ALTSEL1 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0050))
++#define IFXMIPS_GPIO_P0_OD ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0024))
++#define IFXMIPS_GPIO_P1_OD ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0054))
++#define IFXMIPS_GPIO_P0_STOFF ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0028))
++#define IFXMIPS_GPIO_P1_STOFF ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0058))
++#define IFXMIPS_GPIO_P0_PUDSEL ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x002C))
++#define IFXMIPS_GPIO_P1_PUDSEL ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x005C))
++#define IFXMIPS_GPIO_P0_PUDEN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0030))
++#define IFXMIPS_GPIO_P1_PUDEN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0060))
++
++
++#define writel ltq_w32
++#define readl ltq_r32
++void dwc_otg_power_on (void)
++{
++ // clear power
++ writel(readl(DANUBE_PMU_PWDCR) | 0x41, DANUBE_PMU_PWDCR);
++ // set clock gating
++ writel(readl(DANUBE_CGU_IFCCR) | 0x30, DANUBE_CGU_IFCCR);
++ // set power
++ writel(readl(DANUBE_PMU_PWDCR) & ~0x1, DANUBE_PMU_PWDCR);
++ writel(readl(DANUBE_PMU_PWDCR) & ~0x40, DANUBE_PMU_PWDCR);
++ writel(readl(DANUBE_PMU_PWDCR) & ~0x8000, DANUBE_PMU_PWDCR);
++
++#if 1//defined (DWC_HOST_ONLY)
++ // make the hardware be a host controller (default)
++ //clear_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_UBSCFG);
++ writel(readl(DANUBE_RCU_UBSCFG) & ~(1<<DANUBE_USBCFG_HDSEL_BIT), DANUBE_RCU_UBSCFG);
++
++ //#elif defined (DWC_DEVICE_ONLY)
++ /* set the controller to the device mode */
++ // set_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_UBSCFG);
++#else
++#error "For Danube/Twinpass, it should be HOST or Device Only."
++#endif
++
++ // set the HC's byte-order to big-endian
++ //set_bit (DANUBE_USBCFG_HOST_END_BIT, (volatile unsigned long *)DANUBE_RCU_UBSCFG);
++ writel(readl(DANUBE_RCU_UBSCFG) | (1<<DANUBE_USBCFG_HOST_END_BIT), DANUBE_RCU_UBSCFG);
++ //clear_bit (DANUBE_USBCFG_SLV_END_BIT, (volatile unsigned long *)DANUBE_RCU_UBSCFG);
++ writel(readl(DANUBE_RCU_UBSCFG) & ~(1<<DANUBE_USBCFG_SLV_END_BIT), DANUBE_RCU_UBSCFG);
++ //writel(0x400, DANUBE_RCU_UBSCFG);
++
++ // PHY configurations.
++ writel (0x14014, (volatile unsigned long *)0xbe10103c);
++}
++
++int ifx_usb_hc_init(unsigned long base_addr, int irq)
++{
++ return 0;
++}
++
++void ifx_usb_hc_remove(void)
++{
++}
+diff --git a/drivers/usb/dwc_otg/dwc_otg_ifx.h b/drivers/usb/dwc_otg/dwc_otg_ifx.h
+new file mode 100644
+index 0000000..402d7a6
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_ifx.h
+@@ -0,0 +1,85 @@
++/******************************************************************************
++**
++** FILE NAME : dwc_otg_ifx.h
++** PROJECT : Twinpass/Danube
++** MODULES : DWC OTG USB
++**
++** DATE : 12 April 2007
++** AUTHOR : Sung Winder
++** DESCRIPTION : Platform specific initialization.
++** COPYRIGHT : Copyright (c) 2007
++** Infineon Technologies AG
++** 2F, No.2, Li-Hsin Rd., Hsinchu Science Park,
++** Hsin-chu City, 300 Taiwan.
++**
++** This program is free software; you can redistribute it and/or modify
++** it under the terms of the GNU General Public License as published by
++** the Free Software Foundation; either version 2 of the License, or
++** (at your option) any later version.
++**
++** HISTORY
++** $Date $Author $Comment
++** 12 April 2007 Sung Winder Initiate Version
++*******************************************************************************/
++#if !defined(__DWC_OTG_IFX_H__)
++#define __DWC_OTG_IFX_H__
++
++#include <linux/irq.h>
++#include <irq.h>
++
++// 20070316, winder added.
++#ifndef SZ_256K
++#define SZ_256K 0x00040000
++#endif
++
++extern void dwc_otg_power_on (void);
++
++/* FIXME: The current Linux-2.6 do not have these header files, but anyway, we need these. */
++// #include <asm/danube/danube.h>
++// #include <asm/ifx/irq.h>
++
++/* winder, I used the Danube parameter as default. *
++ * We could change this through module param. */
++#define IFX_USB_IOMEM_BASE 0x1e101000
++#define IFX_USB_IOMEM_SIZE SZ_256K
++#define IFX_USB_IRQ LTQ_USB_INT
++
++/**
++ * This function is called to set correct clock gating and power.
++ * For Twinpass/Danube board.
++ */
++#ifndef DANUBE_RCU_BASE_ADDR
++#define DANUBE_RCU_BASE_ADDR (0xBF203000)
++#endif
++
++#ifndef DANUBE_CGU
++#define DANUBE_CGU (0xBF103000)
++#endif
++#ifndef DANUBE_CGU_IFCCR
++/***CGU Interface Clock Control Register***/
++#define DANUBE_CGU_IFCCR ((volatile u32*)(DANUBE_CGU+ 0x0018))
++#endif
++
++#ifndef DANUBE_PMU
++#define DANUBE_PMU (KSEG1+0x1F102000)
++#endif
++#ifndef DANUBE_PMU_PWDCR
++/* PMU Power down Control Register */
++#define DANUBE_PMU_PWDCR ((volatile u32*)(DANUBE_PMU+0x001C))
++#endif
++
++
++#define DANUBE_RCU_UBSCFG ((volatile u32*)(DANUBE_RCU_BASE_ADDR + 0x18))
++#define DANUBE_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
++#define DANUBE_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
++#define DANUBE_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end
++
++extern void ltq_mask_and_ack_irq(struct irq_data *d);
++
++static void inline mask_and_ack_ifx_irq(int x)
++{
++ struct irq_data d;
++ d.irq = x;
++ ltq_mask_and_ack_irq(&d);
++}
++#endif //__DWC_OTG_IFX_H__
+diff --git a/drivers/usb/dwc_otg/dwc_otg_plat.h b/drivers/usb/dwc_otg/dwc_otg_plat.h
+new file mode 100644
+index 0000000..727d0c4
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_plat.h
+@@ -0,0 +1,269 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/platform/dwc_otg_plat.h $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 510301 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_OTG_PLAT_H__)
++#define __DWC_OTG_PLAT_H__
++
++#include <linux/types.h>
++#include <linux/slab.h>
++#include <linux/list.h>
++#include <linux/delay.h>
++#include <asm/io.h>
++
++/**
++ * @file
++ *
++ * This file contains the Platform Specific constants, interfaces
++ * (functions and macros) for Linux.
++ *
++ */
++/*#if !defined(__LINUX__)
++#error "The contents of this file is Linux specific!!!"
++#endif
++*/
++#include <lantiq_soc.h>
++#define writel ltq_w32
++#define readl ltq_r32
++
++/**
++ * Reads the content of a register.
++ *
++ * @param _reg address of register to read.
++ * @return contents of the register.
++ *
++
++ * Usage:<br>
++ * <code>uint32_t dev_ctl = dwc_read_reg32(&dev_regs->dctl);</code>
++ */
++static __inline__ uint32_t dwc_read_reg32( volatile uint32_t *_reg)
++{
++ return readl(_reg);
++};
++
++/**
++ * Writes a register with a 32 bit value.
++ *
++ * @param _reg address of register to read.
++ * @param _value to write to _reg.
++ *
++ * Usage:<br>
++ * <code>dwc_write_reg32(&dev_regs->dctl, 0); </code>
++ */
++static __inline__ void dwc_write_reg32( volatile uint32_t *_reg, const uint32_t _value)
++{
++ writel( _value, _reg );
++};
++
++/**
++ * This function modifies bit values in a register. Using the
++ * algorithm: (reg_contents & ~clear_mask) | set_mask.
++ *
++ * @param _reg address of register to read.
++ * @param _clear_mask bit mask to be cleared.
++ * @param _set_mask bit mask to be set.
++ *
++ * Usage:<br>
++ * <code> // Clear the SOF Interrupt Mask bit and <br>
++ * // set the OTG Interrupt mask bit, leaving all others as they were.
++ * dwc_modify_reg32(&dev_regs->gintmsk, DWC_SOF_INT, DWC_OTG_INT);</code>
++ */
++static __inline__
++ void dwc_modify_reg32( volatile uint32_t *_reg, const uint32_t _clear_mask, const uint32_t _set_mask)
++{
++ writel( (readl(_reg) & ~_clear_mask) | _set_mask, _reg );
++};
++
++
++/**
++ * Wrapper for the OS micro-second delay function.
++ * @param[in] _usecs Microseconds of delay
++ */
++static __inline__ void UDELAY( const uint32_t _usecs )
++{
++ udelay( _usecs );
++}
++
++/**
++ * Wrapper for the OS milli-second delay function.
++ * @param[in] _msecs milliseconds of delay
++ */
++static __inline__ void MDELAY( const uint32_t _msecs )
++{
++ mdelay( _msecs );
++}
++
++/**
++ * Wrapper for the Linux spin_lock. On the ARM (Integrator)
++ * spin_lock() is a nop.
++ *
++ * @param _lock Pointer to the spinlock.
++ */
++static __inline__ void SPIN_LOCK( spinlock_t *_lock )
++{
++ spin_lock(_lock);
++}
++
++/**
++ * Wrapper for the Linux spin_unlock. On the ARM (Integrator)
++ * spin_lock() is a nop.
++ *
++ * @param _lock Pointer to the spinlock.
++ */
++static __inline__ void SPIN_UNLOCK( spinlock_t *_lock )
++{
++ spin_unlock(_lock);
++}
++
++/**
++ * Wrapper (macro) for the Linux spin_lock_irqsave. On the ARM
++ * (Integrator) spin_lock() is a nop.
++ *
++ * @param _l Pointer to the spinlock.
++ * @param _f unsigned long for irq flags storage.
++ */
++#define SPIN_LOCK_IRQSAVE( _l, _f ) { \
++ spin_lock_irqsave(_l,_f); \
++ }
++
++/**
++ * Wrapper (macro) for the Linux spin_unlock_irqrestore. On the ARM
++ * (Integrator) spin_lock() is a nop.
++ *
++ * @param _l Pointer to the spinlock.
++ * @param _f unsigned long for irq flags storage.
++ */
++#define SPIN_UNLOCK_IRQRESTORE( _l,_f ) {\
++ spin_unlock_irqrestore(_l,_f); \
++ }
++
++
++/*
++ * Debugging support vanishes in non-debug builds.
++ */
++
++
++/**
++ * The Debug Level bit-mask variable.
++ */
++extern uint32_t g_dbg_lvl;
++/**
++ * Set the Debug Level variable.
++ */
++static inline uint32_t SET_DEBUG_LEVEL( const uint32_t _new )
++{
++ uint32_t old = g_dbg_lvl;
++ g_dbg_lvl = _new;
++ return old;
++}
++
++/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */
++#define DBG_CIL (0x2)
++/** When debug level has the DBG_CILV bit set, display CIL Verbose debug
++ * messages */
++#define DBG_CILV (0x20)
++/** When debug level has the DBG_PCD bit set, display PCD (Device) debug
++ * messages */
++#define DBG_PCD (0x4)
++/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug
++ * messages */
++#define DBG_PCDV (0x40)
++/** When debug level has the DBG_HCD bit set, display Host debug messages */
++#define DBG_HCD (0x8)
++/** When debug level has the DBG_HCDV bit set, display Verbose Host debug
++ * messages */
++#define DBG_HCDV (0x80)
++/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host
++ * mode. */
++#define DBG_HCD_URB (0x800)
++
++/** When debug level has any bit set, display debug messages */
++#define DBG_ANY (0xFF)
++
++/** All debug messages off */
++#define DBG_OFF 0
++
++/** Prefix string for DWC_DEBUG print macros. */
++#define USB_DWC "DWC_otg: "
++
++/**
++ * Print a debug message when the Global debug level variable contains
++ * the bit defined in <code>lvl</code>.
++ *
++ * @param[in] lvl - Debug level, use one of the DBG_ constants above.
++ * @param[in] x - like printf
++ *
++ * Example:<p>
++ * <code>
++ * DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr);
++ * </code>
++ * <br>
++ * results in:<br>
++ * <code>
++ * usb-DWC_otg: dwc_otg_cil_init(ca867000)
++ * </code>
++ */
++#ifdef DEBUG
++
++# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)printk( KERN_DEBUG USB_DWC x ); }while(0)
++# define DWC_DEBUGP(x...) DWC_DEBUGPL(DBG_ANY, x )
++
++# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl)
++
++#else
++
++# define DWC_DEBUGPL(lvl, x...) do{}while(0)
++# define DWC_DEBUGP(x...)
++
++# define CHK_DEBUG_LEVEL(level) (0)
++
++#endif /*DEBUG*/
++
++/**
++ * Print an Error message.
++ */
++#define DWC_ERROR(x...) printk( KERN_ERR USB_DWC x )
++/**
++ * Print a Warning message.
++ */
++#define DWC_WARN(x...) printk( KERN_WARNING USB_DWC x )
++/**
++ * Print a notice (normal but significant message).
++ */
++#define DWC_NOTICE(x...) printk( KERN_NOTICE USB_DWC x )
++/**
++ * Basic message printing.
++ */
++#define DWC_PRINT(x...) printk( KERN_INFO USB_DWC x )
++
++#endif
++
+diff --git a/drivers/usb/dwc_otg/dwc_otg_regs.h b/drivers/usb/dwc_otg/dwc_otg_regs.h
+new file mode 100644
+index 0000000..397a954
+--- /dev/null
++++ b/drivers/usb/dwc_otg/dwc_otg_regs.h
+@@ -0,0 +1,1797 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_regs.h $
++ * $Revision: 1.1.1.1 $
++ * $Date: 2009-04-17 06:15:34 $
++ * $Change: 631780 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#ifndef __DWC_OTG_REGS_H__
++#define __DWC_OTG_REGS_H__
++
++/**
++ * @file
++ *
++ * This file contains the data structures for accessing the DWC_otg core registers.
++ *
++ * The application interfaces with the HS OTG core by reading from and
++ * writing to the Control and Status Register (CSR) space through the
++ * AHB Slave interface. These registers are 32 bits wide, and the
++ * addresses are 32-bit-block aligned.
++ * CSRs are classified as follows:
++ * - Core Global Registers
++ * - Device Mode Registers
++ * - Device Global Registers
++ * - Device Endpoint Specific Registers
++ * - Host Mode Registers
++ * - Host Global Registers
++ * - Host Port CSRs
++ * - Host Channel Specific Registers
++ *
++ * Only the Core Global registers can be accessed in both Device and
++ * Host modes. When the HS OTG core is operating in one mode, either
++ * Device or Host, the application must not access registers from the
++ * other mode. When the core switches from one mode to another, the
++ * registers in the new mode of operation must be reprogrammed as they
++ * would be after a power-on reset.
++ */
++
++/****************************************************************************/
++/** DWC_otg Core registers .
++ * The dwc_otg_core_global_regs structure defines the size
++ * and relative field offsets for the Core Global registers.
++ */
++typedef struct dwc_otg_core_global_regs
++{
++ /** OTG Control and Status Register. <i>Offset: 000h</i> */
++ volatile uint32_t gotgctl;
++ /** OTG Interrupt Register. <i>Offset: 004h</i> */
++ volatile uint32_t gotgint;
++ /**Core AHB Configuration Register. <i>Offset: 008h</i> */
++ volatile uint32_t gahbcfg;
++#define DWC_GLBINTRMASK 0x0001
++#define DWC_DMAENABLE 0x0020
++#define DWC_NPTXEMPTYLVL_EMPTY 0x0080
++#define DWC_NPTXEMPTYLVL_HALFEMPTY 0x0000
++#define DWC_PTXEMPTYLVL_EMPTY 0x0100
++#define DWC_PTXEMPTYLVL_HALFEMPTY 0x0000
++
++
++ /**Core USB Configuration Register. <i>Offset: 00Ch</i> */
++ volatile uint32_t gusbcfg;
++ /**Core Reset Register. <i>Offset: 010h</i> */
++ volatile uint32_t grstctl;
++ /**Core Interrupt Register. <i>Offset: 014h</i> */
++ volatile uint32_t gintsts;
++ /**Core Interrupt Mask Register. <i>Offset: 018h</i> */
++ volatile uint32_t gintmsk;
++ /**Receive Status Queue Read Register (Read Only). <i>Offset: 01Ch</i> */
++ volatile uint32_t grxstsr;
++ /**Receive Status Queue Read & POP Register (Read Only). <i>Offset: 020h</i>*/
++ volatile uint32_t grxstsp;
++ /**Receive FIFO Size Register. <i>Offset: 024h</i> */
++ volatile uint32_t grxfsiz;
++ /**Non Periodic Transmit FIFO Size Register. <i>Offset: 028h</i> */
++ volatile uint32_t gnptxfsiz;
++ /**Non Periodic Transmit FIFO/Queue Status Register (Read
++ * Only). <i>Offset: 02Ch</i> */
++ volatile uint32_t gnptxsts;
++ /**I2C Access Register. <i>Offset: 030h</i> */
++ volatile uint32_t gi2cctl;
++ /**PHY Vendor Control Register. <i>Offset: 034h</i> */
++ volatile uint32_t gpvndctl;
++ /**General Purpose Input/Output Register. <i>Offset: 038h</i> */
++ volatile uint32_t ggpio;
++ /**User ID Register. <i>Offset: 03Ch</i> */
++ volatile uint32_t guid;
++ /**Synopsys ID Register (Read Only). <i>Offset: 040h</i> */
++ volatile uint32_t gsnpsid;
++ /**User HW Config1 Register (Read Only). <i>Offset: 044h</i> */
++ volatile uint32_t ghwcfg1;
++ /**User HW Config2 Register (Read Only). <i>Offset: 048h</i> */
++ volatile uint32_t ghwcfg2;
++#define DWC_SLAVE_ONLY_ARCH 0
++#define DWC_EXT_DMA_ARCH 1
++#define DWC_INT_DMA_ARCH 2
++
++#define DWC_MODE_HNP_SRP_CAPABLE 0
++#define DWC_MODE_SRP_ONLY_CAPABLE 1
++#define DWC_MODE_NO_HNP_SRP_CAPABLE 2
++#define DWC_MODE_SRP_CAPABLE_DEVICE 3
++#define DWC_MODE_NO_SRP_CAPABLE_DEVICE 4
++#define DWC_MODE_SRP_CAPABLE_HOST 5
++#define DWC_MODE_NO_SRP_CAPABLE_HOST 6
++
++ /**User HW Config3 Register (Read Only). <i>Offset: 04Ch</i> */
++ volatile uint32_t ghwcfg3;
++ /**User HW Config4 Register (Read Only). <i>Offset: 050h</i>*/
++ volatile uint32_t ghwcfg4;
++ /** Reserved <i>Offset: 054h-0FFh</i> */
++ uint32_t reserved[43];
++ /** Host Periodic Transmit FIFO Size Register. <i>Offset: 100h</i> */
++ volatile uint32_t hptxfsiz;
++ /** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled,
++ otherwise Device Transmit FIFO#n Register.
++ * <i>Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15).</i> */
++ //volatile uint32_t dptxfsiz[15];
++ volatile uint32_t dptxfsiz_dieptxf[15];
++} dwc_otg_core_global_regs_t;
++
++/**
++ * This union represents the bit fields of the Core OTG Control
++ * and Status Register (GOTGCTL). Set the bits using the bit
++ * fields then write the <i>d32</i> value to the register.
++ */
++typedef union gotgctl_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ unsigned reserved31_21 : 11;
++ unsigned currmod : 1;
++ unsigned bsesvld : 1;
++ unsigned asesvld : 1;
++ unsigned reserved17 : 1;
++ unsigned conidsts : 1;
++ unsigned reserved15_12 : 4;
++ unsigned devhnpen : 1;
++ unsigned hstsethnpen : 1;
++ unsigned hnpreq : 1;
++ unsigned hstnegscs : 1;
++ unsigned reserved7_2 : 6;
++ unsigned sesreq : 1;
++ unsigned sesreqscs : 1;
++ } b;
++} gotgctl_data_t;
++
++/**
++ * This union represents the bit fields of the Core OTG Interrupt Register
++ * (GOTGINT). Set/clear the bits using the bit fields then write the <i>d32</i>
++ * value to the register.
++ */
++typedef union gotgint_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ /** Current Mode */
++ unsigned reserved31_20 : 12;
++ /** Debounce Done */
++ unsigned debdone : 1;
++ /** A-Device Timeout Change */
++ unsigned adevtoutchng : 1;
++ /** Host Negotiation Detected */
++ unsigned hstnegdet : 1;
++ unsigned reserver16_10 : 7;
++ /** Host Negotiation Success Status Change */
++ unsigned hstnegsucstschng : 1;
++ /** Session Request Success Status Change */
++ unsigned sesreqsucstschng : 1;
++ unsigned reserved3_7 : 5;
++ /** Session End Detected */
++ unsigned sesenddet : 1;
++ /** Current Mode */
++ unsigned reserved1_0 : 2;
++ } b;
++} gotgint_data_t;
++
++
++/**
++ * This union represents the bit fields of the Core AHB Configuration
++ * Register (GAHBCFG). Set/clear the bits using the bit fields then
++ * write the <i>d32</i> value to the register.
++ */
++typedef union gahbcfg_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY 1
++#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0
++ unsigned reserved9_31 : 23;
++ unsigned ptxfemplvl : 1;
++ unsigned nptxfemplvl_txfemplvl : 1;
++#define DWC_GAHBCFG_DMAENABLE 1
++ unsigned reserved : 1;
++ unsigned dmaenable : 1;
++#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE 0
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR 1
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR4 3
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR8 5
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR16 7
++ unsigned hburstlen : 4;
++ unsigned glblintrmsk : 1;
++#define DWC_GAHBCFG_GLBINT_ENABLE 1
++
++ } b;
++} gahbcfg_data_t;
++
++/**
++ * This union represents the bit fields of the Core USB Configuration
++ * Register (GUSBCFG). Set the bits using the bit fields then write
++ * the <i>d32</i> value to the register.
++ */
++typedef union gusbcfg_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ unsigned corrupt_tx_packet: 1; /*fscz*/
++ unsigned force_device_mode: 1;
++ unsigned force_host_mode: 1;
++ unsigned reserved23_28 : 6;
++ unsigned term_sel_dl_pulse : 1;
++ unsigned ulpi_int_vbus_indicator : 1;
++ unsigned ulpi_ext_vbus_drv : 1;
++ unsigned ulpi_clk_sus_m : 1;
++ unsigned ulpi_auto_res : 1;
++ unsigned ulpi_fsls : 1;
++ unsigned otgutmifssel : 1;
++ unsigned phylpwrclksel : 1;
++ unsigned nptxfrwnden : 1;
++ unsigned usbtrdtim : 4;
++ unsigned hnpcap : 1;
++ unsigned srpcap : 1;
++ unsigned ddrsel : 1;
++ unsigned physel : 1;
++ unsigned fsintf : 1;
++ unsigned ulpi_utmi_sel : 1;
++ unsigned phyif : 1;
++ unsigned toutcal : 3;
++ } b;
++} gusbcfg_data_t;
++
++/**
++ * This union represents the bit fields of the Core Reset Register
++ * (GRSTCTL). Set/clear the bits using the bit fields then write the
++ * <i>d32</i> value to the register.
++ */
++typedef union grstctl_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ /** AHB Master Idle. Indicates the AHB Master State
++ * Machine is in IDLE condition. */
++ unsigned ahbidle : 1;
++ /** DMA Request Signal. Indicated DMA request is in
++ * probress. Used for debug purpose. */
++ unsigned dmareq : 1;
++ /** Reserved */
++ unsigned reserved29_11 : 19;
++ /** TxFIFO Number (TxFNum) (Device and Host).
++ *
++ * This is the FIFO number which needs to be flushed,
++ * using the TxFIFO Flush bit. This field should not
++ * be changed until the TxFIFO Flush bit is cleared by
++ * the core.
++ * - 0x0 : Non Periodic TxFIFO Flush
++ * - 0x1 : Periodic TxFIFO #1 Flush in device mode
++ * or Periodic TxFIFO in host mode
++ * - 0x2 : Periodic TxFIFO #2 Flush in device mode.
++ * - ...
++ * - 0xF : Periodic TxFIFO #15 Flush in device mode
++ * - 0x10: Flush all the Transmit NonPeriodic and
++ * Transmit Periodic FIFOs in the core
++ */
++ unsigned txfnum : 5;
++ /** TxFIFO Flush (TxFFlsh) (Device and Host).
++ *
++ * This bit is used to selectively flush a single or
++ * all transmit FIFOs. The application must first
++ * ensure that the core is not in the middle of a
++ * transaction. <p>The application should write into
++ * this bit, only after making sure that neither the
++ * DMA engine is writing into the TxFIFO nor the MAC
++ * is reading the data out of the FIFO. <p>The
++ * application should wait until the core clears this
++ * bit, before performing any operations. This bit
++ * will takes 8 clocks (slowest of PHY or AHB clock)
++ * to clear.
++ */
++ unsigned txfflsh : 1;
++ /** RxFIFO Flush (RxFFlsh) (Device and Host)
++ *
++ * The application can flush the entire Receive FIFO
++ * using this bit. <p>The application must first
++ * ensure that the core is not in the middle of a
++ * transaction. <p>The application should write into
++ * this bit, only after making sure that neither the
++ * DMA engine is reading from the RxFIFO nor the MAC
++ * is writing the data in to the FIFO. <p>The
++ * application should wait until the bit is cleared
++ * before performing any other operations. This bit
++ * will takes 8 clocks (slowest of PHY or AHB clock)
++ * to clear.
++ */
++ unsigned rxfflsh : 1;
++ /** In Token Sequence Learning Queue Flush
++ * (INTknQFlsh) (Device Only)
++ */
++ unsigned intknqflsh : 1;
++ /** Host Frame Counter Reset (Host Only)<br>
++ *
++ * The application can reset the (micro)frame number
++ * counter inside the core, using this bit. When the
++ * (micro)frame counter is reset, the subsequent SOF
++ * sent out by the core, will have a (micro)frame
++ * number of 0.
++ */
++ unsigned hstfrm : 1;
++ /** Hclk Soft Reset
++ *
++ * The application uses this bit to reset the control logic in
++ * the AHB clock domain. Only AHB clock domain pipelines are
++ * reset.
++ */
++ unsigned hsftrst : 1;
++ /** Core Soft Reset (CSftRst) (Device and Host)
++ *
++ * The application can flush the control logic in the
++ * entire core using this bit. This bit resets the
++ * pipelines in the AHB Clock domain as well as the
++ * PHY Clock domain.
++ *
++ * The state machines are reset to an IDLE state, the
++ * control bits in the CSRs are cleared, all the
++ * transmit FIFOs and the receive FIFO are flushed.
++ *
++ * The status mask bits that control the generation of
++ * the interrupt, are cleared, to clear the
++ * interrupt. The interrupt status bits are not
++ * cleared, so the application can get the status of
++ * any events that occurred in the core after it has
++ * set this bit.
++ *
++ * Any transactions on the AHB are terminated as soon
++ * as possible following the protocol. Any
++ * transactions on the USB are terminated immediately.
++ *
++ * The configuration settings in the CSRs are
++ * unchanged, so the software doesn't have to
++ * reprogram these registers (Device
++ * Configuration/Host Configuration/Core System
++ * Configuration/Core PHY Configuration).
++ *
++ * The application can write to this bit, any time it
++ * wants to reset the core. This is a self clearing
++ * bit and the core clears this bit after all the
++ * necessary logic is reset in the core, which may
++ * take several clocks, depending on the current state
++ * of the core.
++ */
++ unsigned csftrst : 1;
++ } b;
++} grstctl_t;
++
++
++/**
++ * This union represents the bit fields of the Core Interrupt Mask
++ * Register (GINTMSK). Set/clear the bits using the bit fields then
++ * write the <i>d32</i> value to the register.
++ */
++typedef union gintmsk_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct
++ {
++ unsigned wkupintr : 1;
++ unsigned sessreqintr : 1;
++ unsigned disconnect : 1;
++ unsigned conidstschng : 1;
++ unsigned reserved27 : 1;
++ unsigned ptxfempty : 1;
++ unsigned hcintr : 1;
++ unsigned portintr : 1;
++ unsigned reserved22_23 : 2;
++ unsigned incomplisoout : 1;
++ unsigned incomplisoin : 1;
++ unsigned outepintr : 1;
++ unsigned inepintr : 1;
++ unsigned epmismatch : 1;
++ unsigned reserved16 : 1;
++ unsigned eopframe : 1;
++ unsigned isooutdrop : 1;
++ unsigned enumdone : 1;
++ unsigned usbreset : 1;
++ unsigned usbsuspend : 1;
++ unsigned erlysuspend : 1;
++ unsigned i2cintr : 1;
++ unsigned reserved8 : 1;
++ unsigned goutnakeff : 1;
++ unsigned ginnakeff : 1;
++ unsigned nptxfempty : 1;
++ unsigned rxstsqlvl : 1;
++ unsigned sofintr : 1;
++ unsigned otgintr : 1;
++ unsigned modemismatch : 1;
++ unsigned reserved0 : 1;
++ } b;
++} gintmsk_data_t;
++/**
++ * This union represents the bit fields of the Core Interrupt Register
++ * (GINTSTS). Set/clear the bits using the bit fields then write the
++ * <i>d32</i> value to the register.
++ */
++typedef union gintsts_data
++{
++ /** raw register data */
++ uint32_t d32;
++#define DWC_SOF_INTR_MASK 0x0008
++ /** register bits */
++ struct
++ {
++#define DWC_HOST_MODE 1
++ unsigned wkupintr : 1;
++ unsigned sessreqintr : 1;
++ unsigned disconnect : 1;
++ unsigned conidstschng : 1;
++ unsigned reserved27 : 1;
++ unsigned ptxfempty : 1;
++ unsigned hcintr : 1;
++ unsigned portintr : 1;
++ unsigned reserved22_23 : 2;
++ unsigned incomplisoout : 1;
++ unsigned incomplisoin : 1;
++ unsigned outepintr : 1;
++ unsigned inepint: 1;
++ unsigned epmismatch : 1;
++ unsigned intokenrx : 1;
++ unsigned eopframe : 1;
++ unsigned isooutdrop : 1;
++ unsigned enumdone : 1;
++ unsigned usbreset : 1;
++ unsigned usbsuspend : 1;
++ unsigned erlysuspend : 1;
++ unsigned i2cintr : 1;
++ unsigned reserved8 : 1;
++ unsigned goutnakeff : 1;
++ unsigned ginnakeff : 1;
++ unsigned nptxfempty : 1;
++ unsigned rxstsqlvl : 1;
++ unsigned sofintr : 1;
++ unsigned otgintr : 1;
++ unsigned modemismatch : 1;
++ unsigned curmode : 1;
++ } b;
++} gintsts_data_t;
++
++
++/**
++ * This union represents the bit fields in the Device Receive Status Read and
++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
++ * element then read out the bits using the <i>b</i>it elements.
++ */
++typedef union device_grxsts_data {
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ unsigned reserved : 7;
++ unsigned fn : 4;
++#define DWC_STS_DATA_UPDT 0x2 // OUT Data Packet
++#define DWC_STS_XFER_COMP 0x3 // OUT Data Transfer Complete
++
++#define DWC_DSTS_GOUT_NAK 0x1 // Global OUT NAK
++#define DWC_DSTS_SETUP_COMP 0x4 // Setup Phase Complete
++#define DWC_DSTS_SETUP_UPDT 0x6 // SETUP Packet
++ unsigned pktsts : 4;
++ unsigned dpid : 2;
++ unsigned bcnt : 11;
++ unsigned epnum : 4;
++ } b;
++} device_grxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Host Receive Status Read and
++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
++ * element then read out the bits using the <i>b</i>it elements.
++ */
++typedef union host_grxsts_data {
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ unsigned reserved31_21 : 11;
++#define DWC_GRXSTS_PKTSTS_IN 0x2
++#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP 0x3
++#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5
++#define DWC_GRXSTS_PKTSTS_CH_HALTED 0x7
++ unsigned pktsts : 4;
++ unsigned dpid : 2;
++ unsigned bcnt : 11;
++ unsigned chnum : 4;
++ } b;
++} host_grxsts_data_t;
++
++/**
++ * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ,
++ * GNPTXFSIZ, DPTXFSIZn). Read the register into the <i>d32</i> element then
++ * read out the bits using the <i>b</i>it elements.
++ */
++typedef union fifosize_data {
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ unsigned depth : 16;
++ unsigned startaddr : 16;
++ } b;
++} fifosize_data_t;
++
++/**
++ * This union represents the bit fields in the Non-Periodic Transmit
++ * FIFO/Queue Status Register (GNPTXSTS). Read the register into the
++ * <i>d32</i> element then read out the bits using the <i>b</i>it
++ * elements.
++ */
++typedef union gnptxsts_data {
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ unsigned reserved : 1;
++ /** Top of the Non-Periodic Transmit Request Queue
++ * - bits 30:27 - Channel/EP Number
++ * - bits 26:25 - Token Type
++ * - bit 24 - Terminate (Last entry for the selected
++ * channel/EP)
++ * - 2'b00 - IN/OUT
++ * - 2'b01 - Zero Length OUT
++ * - 2'b10 - PING/Complete Split
++ * - 2'b11 - Channel Halt
++
++ */
++ unsigned nptxqtop_chnep : 4;
++ unsigned nptxqtop_token : 2;
++ unsigned nptxqtop_terminate : 1;
++ unsigned nptxqspcavail : 8;
++ unsigned nptxfspcavail : 16;
++ } b;
++} gnptxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Transmit
++ * FIFO Status Register (DTXFSTS). Read the register into the
++ * <i>d32</i> element then read out the bits using the <i>b</i>it
++ * elements.
++ */
++typedef union dtxfsts_data /* fscz */ //*
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ unsigned reserved : 16;
++ unsigned txfspcavail : 16;
++ } b;
++} dtxfsts_data_t;
++
++/**
++ * This union represents the bit fields in the I2C Control Register
++ * (I2CCTL). Read the register into the <i>d32</i> element then read out the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union gi2cctl_data {
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ unsigned bsydne : 1;
++ unsigned rw : 1;
++ unsigned reserved : 2;
++ unsigned i2cdevaddr : 2;
++ unsigned i2csuspctl : 1;
++ unsigned ack : 1;
++ unsigned i2cen : 1;
++ unsigned addr : 7;
++ unsigned regaddr : 8;
++ unsigned rwdata : 8;
++ } b;
++} gi2cctl_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config1
++ * Register. Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg1_data {
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ unsigned ep_dir15 : 2;
++ unsigned ep_dir14 : 2;
++ unsigned ep_dir13 : 2;
++ unsigned ep_dir12 : 2;
++ unsigned ep_dir11 : 2;
++ unsigned ep_dir10 : 2;
++ unsigned ep_dir9 : 2;
++ unsigned ep_dir8 : 2;
++ unsigned ep_dir7 : 2;
++ unsigned ep_dir6 : 2;
++ unsigned ep_dir5 : 2;
++ unsigned ep_dir4 : 2;
++ unsigned ep_dir3 : 2;
++ unsigned ep_dir2 : 2;
++ unsigned ep_dir1 : 2;
++ unsigned ep_dir0 : 2;
++ } b;
++} hwcfg1_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config2
++ * Register. Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg2_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ /* GHWCFG2 */
++ unsigned reserved31 : 1;
++ unsigned dev_token_q_depth : 5;
++ unsigned host_perio_tx_q_depth : 2;
++ unsigned nonperio_tx_q_depth : 2;
++ unsigned rx_status_q_depth : 2;
++ unsigned dynamic_fifo : 1;
++ unsigned perio_ep_supported : 1;
++ unsigned num_host_chan : 4;
++ unsigned num_dev_ep : 4;
++ unsigned fs_phy_type : 2;
++#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0
++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1
++#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2
++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3
++ unsigned hs_phy_type : 2;
++ unsigned point2point : 1;
++ unsigned architecture : 2;
++#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0
++#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1
++#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2
++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3
++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4
++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5
++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6
++ unsigned op_mode : 3;
++ } b;
++} hwcfg2_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config3
++ * Register. Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg3_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ /* GHWCFG3 */
++ unsigned dfifo_depth : 16;
++ unsigned reserved15_13 : 3;
++ unsigned ahb_phy_clock_synch : 1;
++ unsigned synch_reset_type : 1;
++ unsigned optional_features : 1;
++ unsigned vendor_ctrl_if : 1;
++ unsigned i2c : 1;
++ unsigned otg_func : 1;
++ unsigned packet_size_cntr_width : 3;
++ unsigned xfer_size_cntr_width : 4;
++ } b;
++} hwcfg3_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config4
++ * Register. Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg4_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++unsigned reserved31_30 : 2; /* fscz */
++ unsigned num_in_eps : 4;
++ unsigned ded_fifo_en : 1;
++
++ unsigned session_end_filt_en : 1;
++ unsigned b_valid_filt_en : 1;
++ unsigned a_valid_filt_en : 1;
++ unsigned vbus_valid_filt_en : 1;
++ unsigned iddig_filt_en : 1;
++ unsigned num_dev_mode_ctrl_ep : 4;
++ unsigned utmi_phy_data_width : 2;
++ unsigned min_ahb_freq : 9;
++ unsigned power_optimiz : 1;
++ unsigned num_dev_perio_in_ep : 4;
++ } b;
++} hwcfg4_data_t;
++
++////////////////////////////////////////////
++// Device Registers
++/**
++ * Device Global Registers. <i>Offsets 800h-BFFh</i>
++ *
++ * The following structures define the size and relative field offsets
++ * for the Device Mode Registers.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_global_regs
++{
++ /** Device Configuration Register. <i>Offset 800h</i> */
++ volatile uint32_t dcfg;
++ /** Device Control Register. <i>Offset: 804h</i> */
++ volatile uint32_t dctl;
++ /** Device Status Register (Read Only). <i>Offset: 808h</i> */
++ volatile uint32_t dsts;
++ /** Reserved. <i>Offset: 80Ch</i> */
++ uint32_t unused;
++ /** Device IN Endpoint Common Interrupt Mask
++ * Register. <i>Offset: 810h</i> */
++ volatile uint32_t diepmsk;
++ /** Device OUT Endpoint Common Interrupt Mask
++ * Register. <i>Offset: 814h</i> */
++ volatile uint32_t doepmsk;
++ /** Device All Endpoints Interrupt Register. <i>Offset: 818h</i> */
++ volatile uint32_t daint;
++ /** Device All Endpoints Interrupt Mask Register. <i>Offset:
++ * 81Ch</i> */
++ volatile uint32_t daintmsk;
++ /** Device IN Token Queue Read Register-1 (Read Only).
++ * <i>Offset: 820h</i> */
++ volatile uint32_t dtknqr1;
++ /** Device IN Token Queue Read Register-2 (Read Only).
++ * <i>Offset: 824h</i> */
++ volatile uint32_t dtknqr2;
++ /** Device VBUS discharge Register. <i>Offset: 828h</i> */
++ volatile uint32_t dvbusdis;
++ /** Device VBUS Pulse Register. <i>Offset: 82Ch</i> */
++ volatile uint32_t dvbuspulse;
++ /** Device IN Token Queue Read Register-3 (Read Only).
++ * Device Thresholding control register (Read/Write)
++ * <i>Offset: 830h</i> */
++ volatile uint32_t dtknqr3_dthrctl;
++ /** Device IN Token Queue Read Register-4 (Read Only). /
++ * Device IN EPs empty Inr. Mask Register (Read/Write)
++ * <i>Offset: 834h</i> */
++ volatile uint32_t dtknqr4_fifoemptymsk;
++} dwc_otg_device_global_regs_t;
++
++/**
++ * This union represents the bit fields in the Device Configuration
++ * Register. Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements. Write the
++ * <i>d32</i> member to the dcfg register.
++ */
++typedef union dcfg_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ unsigned reserved31_23 : 9;
++ /** In Endpoint Mis-match count */
++ unsigned epmscnt : 5;
++ unsigned reserved13_17 : 5;
++ /** Periodic Frame Interval */
++#define DWC_DCFG_FRAME_INTERVAL_80 0
++#define DWC_DCFG_FRAME_INTERVAL_85 1
++#define DWC_DCFG_FRAME_INTERVAL_90 2
++#define DWC_DCFG_FRAME_INTERVAL_95 3
++ unsigned perfrint : 2;
++ /** Device Addresses */
++ unsigned devaddr : 7;
++ unsigned reserved3 : 1;
++ /** Non Zero Length Status OUT Handshake */
++#define DWC_DCFG_SEND_STALL 1
++ unsigned nzstsouthshk : 1;
++ /** Device Speed */
++ unsigned devspd : 2;
++ } b;
++} dcfg_data_t;
++
++/**
++ * This union represents the bit fields in the Device Control
++ * Register. Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union dctl_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ unsigned reserved : 20;
++ /** Power-On Programming Done */
++ unsigned pwronprgdone : 1;
++ /** Clear Global OUT NAK */
++ unsigned cgoutnak : 1;
++ /** Set Global OUT NAK */
++ unsigned sgoutnak : 1;
++ /** Clear Global Non-Periodic IN NAK */
++ unsigned cgnpinnak : 1;
++ /** Set Global Non-Periodic IN NAK */
++ unsigned sgnpinnak : 1;
++ /** Test Control */
++ unsigned tstctl : 3;
++ /** Global OUT NAK Status */
++ unsigned goutnaksts : 1;
++ /** Global Non-Periodic IN NAK Status */
++ unsigned gnpinnaksts : 1;
++ /** Soft Disconnect */
++ unsigned sftdiscon : 1;
++ /** Remote Wakeup */
++ unsigned rmtwkupsig : 1;
++ } b;
++} dctl_data_t;
++
++/**
++ * This union represents the bit fields in the Device Status
++ * Register. Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union dsts_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ unsigned reserved22_31 : 10;
++ /** Frame or Microframe Number of the received SOF */
++ unsigned soffn : 14;
++ unsigned reserved4_7: 4;
++ /** Erratic Error */
++ unsigned errticerr : 1;
++ /** Enumerated Speed */
++#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0
++#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1
++#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ 2
++#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ 3
++ unsigned enumspd : 2;
++ /** Suspend Status */
++ unsigned suspsts : 1;
++ } b;
++} dsts_data_t;
++
++
++/**
++ * This union represents the bit fields in the Device IN EP Interrupt
++ * Register and the Device IN EP Common Mask Register.
++ *
++ * - Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union diepint_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ unsigned reserved07_31 : 23;
++ unsigned txfifoundrn : 1;
++ /** IN Endpoint HAK Effective mask */
++ unsigned emptyintr : 1;
++ /** IN Endpoint NAK Effective mask */
++ unsigned inepnakeff : 1;
++ /** IN Token Received with EP mismatch mask */
++ unsigned intknepmis : 1;
++ /** IN Token received with TxF Empty mask */
++ unsigned intktxfemp : 1;
++ /** TimeOUT Handshake mask (non-ISOC EPs) */
++ unsigned timeout : 1;
++ /** AHB Error mask */
++ unsigned ahberr : 1;
++ /** Endpoint disable mask */
++ unsigned epdisabled : 1;
++ /** Transfer complete mask */
++ unsigned xfercompl : 1;
++ } b;
++} diepint_data_t;
++/**
++ * This union represents the bit fields in the Device IN EP Common
++ * Interrupt Mask Register.
++ */
++typedef union diepint_data diepmsk_data_t;
++
++/**
++ * This union represents the bit fields in the Device OUT EP Interrupt
++ * Registerand Device OUT EP Common Interrupt Mask Register.
++ *
++ * - Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union doepint_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ unsigned reserved04_31 : 27;
++ /** OUT Token Received when Endpoint Disabled */
++ unsigned outtknepdis : 1;
++ /** Setup Phase Done (contorl EPs) */
++ unsigned setup : 1;
++ /** AHB Error */
++ unsigned ahberr : 1;
++ /** Endpoint disable */
++ unsigned epdisabled : 1;
++ /** Transfer complete */
++ unsigned xfercompl : 1;
++ } b;
++} doepint_data_t;
++/**
++ * This union represents the bit fields in the Device OUT EP Common
++ * Interrupt Mask Register.
++ */
++typedef union doepint_data doepmsk_data_t;
++
++
++/**
++ * This union represents the bit fields in the Device All EP Interrupt
++ * and Mask Registers.
++ * - Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union daint_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ /** OUT Endpoint bits */
++ unsigned out : 16;
++ /** IN Endpoint bits */
++ unsigned in : 16;
++ } ep;
++ struct {
++ /** OUT Endpoint bits */
++ unsigned outep15 : 1;
++ unsigned outep14 : 1;
++ unsigned outep13 : 1;
++ unsigned outep12 : 1;
++ unsigned outep11 : 1;
++ unsigned outep10 : 1;
++ unsigned outep9 : 1;
++ unsigned outep8 : 1;
++ unsigned outep7 : 1;
++ unsigned outep6 : 1;
++ unsigned outep5 : 1;
++ unsigned outep4 : 1;
++ unsigned outep3 : 1;
++ unsigned outep2 : 1;
++ unsigned outep1 : 1;
++ unsigned outep0 : 1;
++ /** IN Endpoint bits */
++ unsigned inep15 : 1;
++ unsigned inep14 : 1;
++ unsigned inep13 : 1;
++ unsigned inep12 : 1;
++ unsigned inep11 : 1;
++ unsigned inep10 : 1;
++ unsigned inep9 : 1;
++ unsigned inep8 : 1;
++ unsigned inep7 : 1;
++ unsigned inep6 : 1;
++ unsigned inep5 : 1;
++ unsigned inep4 : 1;
++ unsigned inep3 : 1;
++ unsigned inep2 : 1;
++ unsigned inep1 : 1;
++ unsigned inep0 : 1;
++ } b;
++} daint_data_t;
++
++/**
++ * This union represents the bit fields in the Device IN Token Queue
++ * Read Registers.
++ * - Read the register into the <i>d32</i> member.
++ * - READ-ONLY Register
++ */
++typedef union dtknq1_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ /** EP Numbers of IN Tokens 0 ... 4 */
++ unsigned epnums0_5 : 24;
++ /** write pointer has wrapped. */
++ unsigned wrap_bit : 1;
++ /** Reserved */
++ unsigned reserved05_06 : 2;
++ /** In Token Queue Write Pointer */
++ unsigned intknwptr : 5;
++ }b;
++} dtknq1_data_t;
++
++/**
++ * This union represents Threshold control Register
++ * - Read and write the register into the <i>d32</i> member.
++ * - READ-WRITABLE Register
++ */
++typedef union dthrctl_data //* /*fscz */
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ /** Reserved */
++ unsigned reserved26_31 : 6;
++ /** Rx Thr. Length */
++ unsigned rx_thr_len : 9;
++ /** Rx Thr. Enable */
++ unsigned rx_thr_en : 1;
++ /** Reserved */
++ unsigned reserved11_15 : 5;
++ /** Tx Thr. Length */
++ unsigned tx_thr_len : 9;
++ /** ISO Tx Thr. Enable */
++ unsigned iso_thr_en : 1;
++ /** non ISO Tx Thr. Enable */
++ unsigned non_iso_thr_en : 1;
++
++ }b;
++} dthrctl_data_t;
++
++/**
++ * Device Logical IN Endpoint-Specific Registers. <i>Offsets
++ * 900h-AFCh</i>
++ *
++ * There will be one set of endpoint registers per logical endpoint
++ * implemented.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_in_ep_regs
++{
++ /** Device IN Endpoint Control Register. <i>Offset:900h +
++ * (ep_num * 20h) + 00h</i> */
++ volatile uint32_t diepctl;
++ /** Reserved. <i>Offset:900h + (ep_num * 20h) + 04h</i> */
++ uint32_t reserved04;
++ /** Device IN Endpoint Interrupt Register. <i>Offset:900h +
++ * (ep_num * 20h) + 08h</i> */
++ volatile uint32_t diepint;
++ /** Reserved. <i>Offset:900h + (ep_num * 20h) + 0Ch</i> */
++ uint32_t reserved0C;
++ /** Device IN Endpoint Transfer Size
++ * Register. <i>Offset:900h + (ep_num * 20h) + 10h</i> */
++ volatile uint32_t dieptsiz;
++ /** Device IN Endpoint DMA Address Register. <i>Offset:900h +
++ * (ep_num * 20h) + 14h</i> */
++ volatile uint32_t diepdma;
++ /** Reserved. <i>Offset:900h + (ep_num * 20h) + 18h - 900h +
++ * (ep_num * 20h) + 1Ch</i>*/
++ volatile uint32_t dtxfsts;
++ /** Reserved. <i>Offset:900h + (ep_num * 20h) + 1Ch - 900h +
++ * (ep_num * 20h) + 1Ch</i>*/
++ uint32_t reserved18;
++} dwc_otg_dev_in_ep_regs_t;
++
++/**
++ * Device Logical OUT Endpoint-Specific Registers. <i>Offsets:
++ * B00h-CFCh</i>
++ *
++ * There will be one set of endpoint registers per logical endpoint
++ * implemented.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_out_ep_regs
++{
++ /** Device OUT Endpoint Control Register. <i>Offset:B00h +
++ * (ep_num * 20h) + 00h</i> */
++ volatile uint32_t doepctl;
++ /** Device OUT Endpoint Frame number Register. <i>Offset:
++ * B00h + (ep_num * 20h) + 04h</i> */
++ volatile uint32_t doepfn;
++ /** Device OUT Endpoint Interrupt Register. <i>Offset:B00h +
++ * (ep_num * 20h) + 08h</i> */
++ volatile uint32_t doepint;
++ /** Reserved. <i>Offset:B00h + (ep_num * 20h) + 0Ch</i> */
++ uint32_t reserved0C;
++ /** Device OUT Endpoint Transfer Size Register. <i>Offset:
++ * B00h + (ep_num * 20h) + 10h</i> */
++ volatile uint32_t doeptsiz;
++ /** Device OUT Endpoint DMA Address Register. <i>Offset:B00h
++ * + (ep_num * 20h) + 14h</i> */
++ volatile uint32_t doepdma;
++ /** Reserved. <i>Offset:B00h + (ep_num * 20h) + 18h - B00h +
++ * (ep_num * 20h) + 1Ch</i> */
++ uint32_t unused[2];
++} dwc_otg_dev_out_ep_regs_t;
++
++/**
++ * This union represents the bit fields in the Device EP Control
++ * Register. Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union depctl_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ /** Endpoint Enable */
++ unsigned epena : 1;
++ /** Endpoint Disable */
++ unsigned epdis : 1;
++ /** Set DATA1 PID (INTR/Bulk IN and OUT endpoints)
++ * Writing to this field sets the Endpoint DPID (DPID)
++ * field in this register to DATA1 Set Odd
++ * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints)
++ * Writing to this field sets the Even/Odd
++ * (micro)frame (EO_FrNum) field to odd (micro) frame.
++ */
++ unsigned setd1pid : 1;
++ /** Set DATA0 PID (INTR/Bulk IN and OUT endpoints)
++ * Writing to this field sets the Endpoint DPID (DPID)
++ * field in this register to DATA0. Set Even
++ * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints)
++ * Writing to this field sets the Even/Odd
++ * (micro)frame (EO_FrNum) field to even (micro)
++ * frame.
++ */
++ unsigned setd0pid : 1;
++ /** Set NAK */
++ unsigned snak : 1;
++ /** Clear NAK */
++ unsigned cnak : 1;
++ /** Tx Fifo Number
++ * IN EPn/IN EP0
++ * OUT EPn/OUT EP0 - reserved */
++ unsigned txfnum : 4;
++ /** Stall Handshake */
++ unsigned stall : 1;
++ /** Snoop Mode
++ * OUT EPn/OUT EP0
++ * IN EPn/IN EP0 - reserved */
++ unsigned snp : 1;
++ /** Endpoint Type
++ * 2'b00: Control
++ * 2'b01: Isochronous
++ * 2'b10: Bulk
++ * 2'b11: Interrupt */
++ unsigned eptype : 2;
++ /** NAK Status */
++ unsigned naksts : 1;
++ /** Endpoint DPID (INTR/Bulk IN and OUT endpoints)
++ * This field contains the PID of the packet going to
++ * be received or transmitted on this endpoint. The
++ * application should program the PID of the first
++ * packet going to be received or transmitted on this
++ * endpoint , after the endpoint is
++ * activated. Application use the SetD1PID and
++ * SetD0PID fields of this register to program either
++ * D0 or D1 PID.
++ *
++ * The encoding for this field is
++ * - 0: D0
++ * - 1: D1
++ */
++ unsigned dpid : 1;
++ /** USB Active Endpoint */
++ unsigned usbactep : 1;
++ /** Next Endpoint
++ * IN EPn/IN EP0
++ * OUT EPn/OUT EP0 - reserved */
++ unsigned nextep : 4;
++ /** Maximum Packet Size
++ * IN/OUT EPn
++ * IN/OUT EP0 - 2 bits
++ * 2'b00: 64 Bytes
++ * 2'b01: 32
++ * 2'b10: 16
++ * 2'b11: 8 */
++#define DWC_DEP0CTL_MPS_64 0
++#define DWC_DEP0CTL_MPS_32 1
++#define DWC_DEP0CTL_MPS_16 2
++#define DWC_DEP0CTL_MPS_8 3
++ unsigned mps : 11;
++ } b;
++} depctl_data_t;
++
++/**
++ * This union represents the bit fields in the Device EP Transfer
++ * Size Register. Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union deptsiz_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ unsigned reserved : 1;
++ /** Multi Count - Periodic IN endpoints */
++ unsigned mc : 2;
++ /** Packet Count */
++ unsigned pktcnt : 10;
++ /** Transfer size */
++ unsigned xfersize : 19;
++ } b;
++} deptsiz_data_t;
++
++/**
++ * This union represents the bit fields in the Device EP 0 Transfer
++ * Size Register. Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union deptsiz0_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ unsigned reserved31 : 1;
++ /**Setup Packet Count (DOEPTSIZ0 Only) */
++ unsigned supcnt : 2;
++ /** Reserved */
++ unsigned reserved28_20 : 9;
++ /** Packet Count */
++ unsigned pktcnt : 1;
++ /** Reserved */
++ unsigned reserved18_7 : 12;
++ /** Transfer size */
++ unsigned xfersize : 7;
++ } b;
++} deptsiz0_data_t;
++
++
++/** Maximum number of Periodic FIFOs */
++#define MAX_PERIO_FIFOS 15
++/** Maximum number of TX FIFOs */
++#define MAX_TX_FIFOS 15
++/** Maximum number of Endpoints/HostChannels */
++#define MAX_EPS_CHANNELS 16
++//#define MAX_EPS_CHANNELS 4
++
++/**
++ * The dwc_otg_dev_if structure contains information needed to manage
++ * the DWC_otg controller acting in device mode. It represents the
++ * programming view of the device-specific aspects of the controller.
++ */
++typedef struct dwc_otg_dev_if {
++ /** Pointer to device Global registers.
++ * Device Global Registers starting at offset 800h
++ */
++ dwc_otg_device_global_regs_t *dev_global_regs;
++#define DWC_DEV_GLOBAL_REG_OFFSET 0x800
++
++ /**
++ * Device Logical IN Endpoint-Specific Registers 900h-AFCh
++ */
++ dwc_otg_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS];
++#define DWC_DEV_IN_EP_REG_OFFSET 0x900
++#define DWC_EP_REG_OFFSET 0x20
++
++ /** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */
++ dwc_otg_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS];
++#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00
++
++ /* Device configuration information*/
++ uint8_t speed; /**< Device Speed 0: Unknown, 1: LS, 2:FS, 3: HS */
++ //uint8_t num_eps; /**< Number of EPs range: 0-16 (includes EP0) */
++ //uint8_t num_perio_eps; /**< # of Periodic EP range: 0-15 */
++ /*fscz */
++ uint8_t num_in_eps; /**< Number # of Tx EP range: 0-15 exept ep0 */
++ uint8_t num_out_eps; /**< Number # of Rx EP range: 0-15 exept ep 0*/
++
++ /** Size of periodic FIFOs (Bytes) */
++ uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS];
++
++ /** Size of Tx FIFOs (Bytes) */
++ uint16_t tx_fifo_size[MAX_TX_FIFOS];
++
++ /** Thresholding enable flags and length varaiables **/
++ uint16_t rx_thr_en;
++ uint16_t iso_tx_thr_en;
++ uint16_t non_iso_tx_thr_en;
++
++ uint16_t rx_thr_length;
++ uint16_t tx_thr_length;
++} dwc_otg_dev_if_t;
++
++/**
++ * This union represents the bit fields in the Power and Clock Gating Control
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union pcgcctl_data
++{
++ /** raw register data */
++ uint32_t d32;
++
++ /** register bits */
++ struct {
++ unsigned reserved31_05 : 27;
++ /** PHY Suspended */
++ unsigned physuspended : 1;
++ /** Reset Power Down Modules */
++ unsigned rstpdwnmodule : 1;
++ /** Power Clamp */
++ unsigned pwrclmp : 1;
++ /** Gate Hclk */
++ unsigned gatehclk : 1;
++ /** Stop Pclk */
++ unsigned stoppclk : 1;
++ } b;
++} pcgcctl_data_t;
++
++/////////////////////////////////////////////////
++// Host Mode Register Structures
++//
++/**
++ * The Host Global Registers structure defines the size and relative
++ * field offsets for the Host Mode Global Registers. Host Global
++ * Registers offsets 400h-7FFh.
++*/
++typedef struct dwc_otg_host_global_regs
++{
++ /** Host Configuration Register. <i>Offset: 400h</i> */
++ volatile uint32_t hcfg;
++ /** Host Frame Interval Register. <i>Offset: 404h</i> */
++ volatile uint32_t hfir;
++ /** Host Frame Number / Frame Remaining Register. <i>Offset: 408h</i> */
++ volatile uint32_t hfnum;
++ /** Reserved. <i>Offset: 40Ch</i> */
++ uint32_t reserved40C;
++ /** Host Periodic Transmit FIFO/ Queue Status Register. <i>Offset: 410h</i> */
++ volatile uint32_t hptxsts;
++ /** Host All Channels Interrupt Register. <i>Offset: 414h</i> */
++ volatile uint32_t haint;
++ /** Host All Channels Interrupt Mask Register. <i>Offset: 418h</i> */
++ volatile uint32_t haintmsk;
++} dwc_otg_host_global_regs_t;
++
++/**
++ * This union represents the bit fields in the Host Configuration Register.
++ * Read the register into the <i>d32</i> member then set/clear the bits using
++ * the <i>b</i>it elements. Write the <i>d32</i> member to the hcfg register.
++ */
++typedef union hcfg_data
++{
++ /** raw register data */
++ uint32_t d32;
++
++ /** register bits */
++ struct {
++ /** Reserved */
++ //unsigned reserved31_03 : 29;
++ /** FS/LS Only Support */
++ unsigned fslssupp : 1;
++ /** FS/LS Phy Clock Select */
++#define DWC_HCFG_30_60_MHZ 0
++#define DWC_HCFG_48_MHZ 1
++#define DWC_HCFG_6_MHZ 2
++ unsigned fslspclksel : 2;
++ } b;
++} hcfg_data_t;
++
++/**
++ * This union represents the bit fields in the Host Frame Remaing/Number
++ * Register.
++ */
++typedef union hfir_data
++{
++ /** raw register data */
++ uint32_t d32;
++
++ /** register bits */
++ struct {
++ unsigned reserved : 16;
++ unsigned frint : 16;
++ } b;
++} hfir_data_t;
++
++/**
++ * This union represents the bit fields in the Host Frame Remaing/Number
++ * Register.
++ */
++typedef union hfnum_data
++{
++ /** raw register data */
++ uint32_t d32;
++
++ /** register bits */
++ struct {
++ unsigned frrem : 16;
++#define DWC_HFNUM_MAX_FRNUM 0x3FFF
++ unsigned frnum : 16;
++ } b;
++} hfnum_data_t;
++
++typedef union hptxsts_data
++{
++ /** raw register data */
++ uint32_t d32;
++
++ /** register bits */
++ struct {
++ /** Top of the Periodic Transmit Request Queue
++ * - bit 24 - Terminate (last entry for the selected channel)
++ * - bits 26:25 - Token Type
++ * - 2'b00 - Zero length
++ * - 2'b01 - Ping
++ * - 2'b10 - Disable
++ * - bits 30:27 - Channel Number
++ * - bit 31 - Odd/even microframe
++ */
++ unsigned ptxqtop_odd : 1;
++ unsigned ptxqtop_chnum : 4;
++ unsigned ptxqtop_token : 2;
++ unsigned ptxqtop_terminate : 1;
++ unsigned ptxqspcavail : 8;
++ unsigned ptxfspcavail : 16;
++ } b;
++} hptxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Host Port Control and Status
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hprt0 register.
++ */
++typedef union hprt0_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ unsigned reserved19_31 : 13;
++#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0
++#define DWC_HPRT0_PRTSPD_FULL_SPEED 1
++#define DWC_HPRT0_PRTSPD_LOW_SPEED 2
++ unsigned prtspd : 2;
++ unsigned prttstctl : 4;
++ unsigned prtpwr : 1;
++ unsigned prtlnsts : 2;
++ unsigned reserved9 : 1;
++ unsigned prtrst : 1;
++ unsigned prtsusp : 1;
++ unsigned prtres : 1;
++ unsigned prtovrcurrchng : 1;
++ unsigned prtovrcurract : 1;
++ unsigned prtenchng : 1;
++ unsigned prtena : 1;
++ unsigned prtconndet : 1;
++ unsigned prtconnsts : 1;
++ } b;
++} hprt0_data_t;
++
++/**
++ * This union represents the bit fields in the Host All Interrupt
++ * Register.
++ */
++typedef union haint_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ unsigned reserved : 16;
++ unsigned ch15 : 1;
++ unsigned ch14 : 1;
++ unsigned ch13 : 1;
++ unsigned ch12 : 1;
++ unsigned ch11 : 1;
++ unsigned ch10 : 1;
++ unsigned ch9 : 1;
++ unsigned ch8 : 1;
++ unsigned ch7 : 1;
++ unsigned ch6 : 1;
++ unsigned ch5 : 1;
++ unsigned ch4 : 1;
++ unsigned ch3 : 1;
++ unsigned ch2 : 1;
++ unsigned ch1 : 1;
++ unsigned ch0 : 1;
++ } b;
++ struct {
++ unsigned reserved : 16;
++ unsigned chint : 16;
++ } b2;
++} haint_data_t;
++
++/**
++ * This union represents the bit fields in the Host All Interrupt
++ * Register.
++ */
++typedef union haintmsk_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ unsigned reserved : 16;
++ unsigned ch15 : 1;
++ unsigned ch14 : 1;
++ unsigned ch13 : 1;
++ unsigned ch12 : 1;
++ unsigned ch11 : 1;
++ unsigned ch10 : 1;
++ unsigned ch9 : 1;
++ unsigned ch8 : 1;
++ unsigned ch7 : 1;
++ unsigned ch6 : 1;
++ unsigned ch5 : 1;
++ unsigned ch4 : 1;
++ unsigned ch3 : 1;
++ unsigned ch2 : 1;
++ unsigned ch1 : 1;
++ unsigned ch0 : 1;
++ } b;
++ struct {
++ unsigned reserved : 16;
++ unsigned chint : 16;
++ } b2;
++} haintmsk_data_t;
++
++/**
++ * Host Channel Specific Registers. <i>500h-5FCh</i>
++ */
++typedef struct dwc_otg_hc_regs
++{
++ /** Host Channel 0 Characteristic Register. <i>Offset: 500h + (chan_num * 20h) + 00h</i> */
++ volatile uint32_t hcchar;
++ /** Host Channel 0 Split Control Register. <i>Offset: 500h + (chan_num * 20h) + 04h</i> */
++ volatile uint32_t hcsplt;
++ /** Host Channel 0 Interrupt Register. <i>Offset: 500h + (chan_num * 20h) + 08h</i> */
++ volatile uint32_t hcint;
++ /** Host Channel 0 Interrupt Mask Register. <i>Offset: 500h + (chan_num * 20h) + 0Ch</i> */
++ volatile uint32_t hcintmsk;
++ /** Host Channel 0 Transfer Size Register. <i>Offset: 500h + (chan_num * 20h) + 10h</i> */
++ volatile uint32_t hctsiz;
++ /** Host Channel 0 DMA Address Register. <i>Offset: 500h + (chan_num * 20h) + 14h</i> */
++ volatile uint32_t hcdma;
++ /** Reserved. <i>Offset: 500h + (chan_num * 20h) + 18h - 500h + (chan_num * 20h) + 1Ch</i> */
++ uint32_t reserved[2];
++} dwc_otg_hc_regs_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Characteristics
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcchar register.
++ */
++typedef union hcchar_data
++{
++ /** raw register data */
++ uint32_t d32;
++
++ /** register bits */
++ struct {
++ /** Channel enable */
++ unsigned chen : 1;
++ /** Channel disable */
++ unsigned chdis : 1;
++ /**
++ * Frame to transmit periodic transaction.
++ * 0: even, 1: odd
++ */
++ unsigned oddfrm : 1;
++ /** Device address */
++ unsigned devaddr : 7;
++ /** Packets per frame for periodic transfers. 0 is reserved. */
++ unsigned multicnt : 2;
++ /** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */
++ unsigned eptype : 2;
++ /** 0: Full/high speed device, 1: Low speed device */
++ unsigned lspddev : 1;
++ unsigned reserved : 1;
++ /** 0: OUT, 1: IN */
++ unsigned epdir : 1;
++ /** Endpoint number */
++ unsigned epnum : 4;
++ /** Maximum packet size in bytes */
++ unsigned mps : 11;
++ } b;
++} hcchar_data_t;
++
++typedef union hcsplt_data
++{
++ /** raw register data */
++ uint32_t d32;
++
++ /** register bits */
++ struct {
++ /** Split Enble */
++ unsigned spltena : 1;
++ /** Reserved */
++ unsigned reserved : 14;
++ /** Do Complete Split */
++ unsigned compsplt : 1;
++ /** Transaction Position */
++#define DWC_HCSPLIT_XACTPOS_MID 0
++#define DWC_HCSPLIT_XACTPOS_END 1
++#define DWC_HCSPLIT_XACTPOS_BEGIN 2
++#define DWC_HCSPLIT_XACTPOS_ALL 3
++ unsigned xactpos : 2;
++ /** Hub Address */
++ unsigned hubaddr : 7;
++ /** Port Address */
++ unsigned prtaddr : 7;
++ } b;
++} hcsplt_data_t;
++
++
++/**
++ * This union represents the bit fields in the Host All Interrupt
++ * Register.
++ */
++typedef union hcint_data
++{
++ /** raw register data */
++ uint32_t d32;
++ /** register bits */
++ struct {
++ /** Reserved */
++ unsigned reserved : 21;
++ /** Data Toggle Error */
++ unsigned datatglerr : 1;
++ /** Frame Overrun */
++ unsigned frmovrun : 1;
++ /** Babble Error */
++ unsigned bblerr : 1;
++ /** Transaction Err */
++ unsigned xacterr : 1;
++ /** NYET Response Received */
++ unsigned nyet : 1;
++ /** ACK Response Received */
++ unsigned ack : 1;
++ /** NAK Response Received */
++ unsigned nak : 1;
++ /** STALL Response Received */
++ unsigned stall : 1;
++ /** AHB Error */
++ unsigned ahberr : 1;
++ /** Channel Halted */
++ unsigned chhltd : 1;
++ /** Transfer Complete */
++ unsigned xfercomp : 1;
++ } b;
++} hcint_data_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Transfer Size
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcchar register.
++ */
++typedef union hctsiz_data
++{
++ /** raw register data */
++ uint32_t d32;
++
++ /** register bits */
++ struct {
++ /** Do PING protocol when 1 */
++ unsigned dopng : 1;
++ /**
++ * Packet ID for next data packet
++ * 0: DATA0
++ * 1: DATA2
++ * 2: DATA1
++ * 3: MDATA (non-Control), SETUP (Control)
++ */
++#define DWC_HCTSIZ_DATA0 0
++#define DWC_HCTSIZ_DATA1 2
++#define DWC_HCTSIZ_DATA2 1
++#define DWC_HCTSIZ_MDATA 3
++#define DWC_HCTSIZ_SETUP 3
++ unsigned pid : 2;
++ /** Data packets to transfer */
++ unsigned pktcnt : 10;
++ /** Total transfer size in bytes */
++ unsigned xfersize : 19;
++ } b;
++} hctsiz_data_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Interrupt Mask
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcintmsk register.
++ */
++typedef union hcintmsk_data
++{
++ /** raw register data */
++ uint32_t d32;
++
++ /** register bits */
++ struct {
++ unsigned reserved : 21;
++ unsigned datatglerr : 1;
++ unsigned frmovrun : 1;
++ unsigned bblerr : 1;
++ unsigned xacterr : 1;
++ unsigned nyet : 1;
++ unsigned ack : 1;
++ unsigned nak : 1;
++ unsigned stall : 1;
++ unsigned ahberr : 1;
++ unsigned chhltd : 1;
++ unsigned xfercompl : 1;
++ } b;
++} hcintmsk_data_t;
++
++/** OTG Host Interface Structure.
++ *
++ * The OTG Host Interface Structure structure contains information
++ * needed to manage the DWC_otg controller acting in host mode. It
++ * represents the programming view of the host-specific aspects of the
++ * controller.
++ */
++typedef struct dwc_otg_host_if {
++ /** Host Global Registers starting at offset 400h.*/
++ dwc_otg_host_global_regs_t *host_global_regs;
++#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400
++
++ /** Host Port 0 Control and Status Register */
++ volatile uint32_t *hprt0;
++#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440
++
++
++ /** Host Channel Specific Registers at offsets 500h-5FCh. */
++ dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS];
++#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500
++#define DWC_OTG_CHAN_REGS_OFFSET 0x20
++
++
++ /* Host configuration information */
++ /** Number of Host Channels (range: 1-16) */
++ uint8_t num_host_channels;
++ /** Periodic EPs supported (0: no, 1: yes) */
++ uint8_t perio_eps_supported;
++ /** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */
++ uint16_t perio_tx_fifo_size;
++
++} dwc_otg_host_if_t;
++
++#endif
+--
+1.7.9.1
+
+++ /dev/null
-From 668e5f88aa80ef8c4c8cb935c7c222146de79825 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 30 Sep 2011 14:37:36 +0200
-Subject: [PATCH 48/70] MIPS: lantiq: adds dwc_otg
-
----
- drivers/usb/Kconfig | 2 +
- drivers/usb/Makefile | 2 +
- drivers/usb/core/hub.c | 4 +-
- drivers/usb/dwc_otg/Kconfig | 37 +
- drivers/usb/dwc_otg/Makefile | 39 +
- drivers/usb/dwc_otg/dwc_otg_attr.c | 802 ++++++++
- drivers/usb/dwc_otg/dwc_otg_attr.h | 67 +
- drivers/usb/dwc_otg/dwc_otg_cil.c | 3025 +++++++++++++++++++++++++++++++
- drivers/usb/dwc_otg/dwc_otg_cil.h | 911 ++++++++++
- drivers/usb/dwc_otg/dwc_otg_cil_ifx.h | 58 +
- drivers/usb/dwc_otg/dwc_otg_cil_intr.c | 708 ++++++++
- drivers/usb/dwc_otg/dwc_otg_driver.c | 1274 +++++++++++++
- drivers/usb/dwc_otg/dwc_otg_driver.h | 84 +
- drivers/usb/dwc_otg/dwc_otg_hcd.c | 2870 +++++++++++++++++++++++++++++
- drivers/usb/dwc_otg/dwc_otg_hcd.h | 676 +++++++
- drivers/usb/dwc_otg/dwc_otg_hcd_intr.c | 1841 +++++++++++++++++++
- drivers/usb/dwc_otg/dwc_otg_hcd_queue.c | 794 ++++++++
- drivers/usb/dwc_otg/dwc_otg_ifx.c | 100 +
- drivers/usb/dwc_otg/dwc_otg_ifx.h | 85 +
- drivers/usb/dwc_otg/dwc_otg_plat.h | 269 +++
- drivers/usb/dwc_otg/dwc_otg_regs.h | 1797 ++++++++++++++++++
- 21 files changed, 15443 insertions(+), 2 deletions(-)
- create mode 100644 drivers/usb/dwc_otg/Kconfig
- create mode 100644 drivers/usb/dwc_otg/Makefile
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_attr.c
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_attr.h
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_cil.c
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_cil.h
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_cil_ifx.h
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_cil_intr.c
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_driver.c
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_driver.h
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd.c
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd.h
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd_queue.c
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_ifx.c
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_ifx.h
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_plat.h
- create mode 100644 drivers/usb/dwc_otg/dwc_otg_regs.h
-
---- a/drivers/usb/Kconfig
-+++ b/drivers/usb/Kconfig
-@@ -129,6 +129,8 @@ source "drivers/usb/wusbcore/Kconfig"
-
- source "drivers/usb/host/Kconfig"
-
-+source "drivers/usb/dwc_otg/Kconfig"
-+
- source "drivers/usb/musb/Kconfig"
-
- source "drivers/usb/renesas_usbhs/Kconfig"
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -30,6 +30,8 @@ obj-$(CONFIG_USB_C67X00_HCD) += c67x00/
-
- obj-$(CONFIG_USB_WUSB) += wusbcore/
-
-+obj-$(CONFIG_DWC_OTG) += dwc_otg/
-+
- obj-$(CONFIG_USB_ACM) += class/
- obj-$(CONFIG_USB_PRINTER) += class/
- obj-$(CONFIG_USB_WDM) += class/
---- a/drivers/usb/core/hub.c
-+++ b/drivers/usb/core/hub.c
-@@ -2939,11 +2939,11 @@ hub_port_init (struct usb_hub *hub, stru
- udev->ttport = hdev->ttport;
- } else if (udev->speed != USB_SPEED_HIGH
- && hdev->speed == USB_SPEED_HIGH) {
-- if (!hub->tt.hub) {
-+/* if (!hub->tt.hub) {
- dev_err(&udev->dev, "parent hub has no TT\n");
- retval = -EINVAL;
- goto fail;
-- }
-+ }*/
- udev->tt = &hub->tt;
- udev->ttport = port1;
- }
---- /dev/null
-+++ b/drivers/usb/dwc_otg/Kconfig
-@@ -0,0 +1,37 @@
-+config DWC_OTG
-+ tristate "Synopsis DWC_OTG support"
-+ depends on USB
-+ help
-+ This driver supports Synopsis DWC_OTG IP core
-+ embebbed on many SOCs (ralink, infineon, etc)
-+
-+choice
-+ prompt "USB Operation Mode"
-+ depends on DWC_OTG
-+ default DWC_OTG_HOST_ONLY
-+
-+config DWC_OTG_HOST_ONLY
-+ bool "HOST ONLY MODE"
-+ depends on DWC_OTG
-+
-+#config DWC_OTG_DEVICE_ONLY
-+# bool "DEVICE ONLY MODE"
-+# depends on DWC_OTG
-+endchoice
-+
-+choice
-+ prompt "Platform"
-+ depends on DWC_OTG
-+ default DWC_OTG_LANTIQ
-+
-+config DWC_OTG_LANTIQ
-+ bool "Lantiq"
-+ depends on LANTIQ
-+ help
-+ Danube USB Host Controller
-+ platform support
-+endchoice
-+
-+config DWC_OTG_DEBUG
-+ bool "Enable debug mode"
-+ depends on DWC_OTG
---- /dev/null
-+++ b/drivers/usb/dwc_otg/Makefile
-@@ -0,0 +1,39 @@
-+#
-+# Makefile for DWC_otg Highspeed USB controller driver
-+#
-+
-+ifeq ($(CONFIG_DWC_OTG_DEBUG),y)
-+EXTRA_CFLAGS += -DDEBUG
-+endif
-+
-+# Use one of the following flags to compile the software in host-only or
-+# device-only mode based on the configuration selected by the user
-+ifeq ($(CONFIG_DWC_OTG_HOST_ONLY),y)
-+ EXTRA_CFLAGS += -DDWC_OTG_HOST_ONLY -DDWC_HOST_ONLY
-+ EXTRA_CFLAGS += -DDWC_OTG_EN_ISOC -DDWC_EN_ISOC
-+else ifeq ($(CONFIG_DWC_OTG_DEVICE_ONLY),y)
-+ EXTRA_CFLAGS += -DDWC_OTG_DEVICE_ONLY
-+else
-+ EXTRA_CFLAGS += -DDWC_OTG_MODE
-+endif
-+
-+# EXTRA_CFLAGS += -DDWC_HS_ELECT_TST
-+# EXTRA_CFLAGS += -DDWC_OTG_EXT_CHG_PUMP
-+
-+ifeq ($(CONFIG_DWC_OTG_LANTIQ),y)
-+ EXTRA_CFLAGS += -Dlinux -D__LINUX__ -DDWC_OTG_IFX -DDWC_OTG_HOST_ONLY -DDWC_HOST_ONLY -D__KERNEL__
-+endif
-+ifeq ($(CONFIG_DWC_OTG_LANTIQ),m)
-+ EXTRA_CFLAGS += -Dlinux -D__LINUX__ -DDWC_OTG_IFX -DDWC_HOST_ONLY -DMODULE -D__KERNEL__ -DDEBUG
-+endif
-+
-+obj-$(CONFIG_DWC_OTG) := dwc_otg.o
-+dwc_otg-objs := dwc_otg_hcd.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o
-+#dwc_otg-objs += dwc_otg_pcd.o dwc_otg_pcd_intr.o
-+dwc_otg-objs += dwc_otg_attr.o
-+dwc_otg-objs += dwc_otg_cil.o dwc_otg_cil_intr.o
-+dwc_otg-objs += dwc_otg_ifx.o
-+dwc_otg-objs += dwc_otg_driver.o
-+
-+#obj-$(CONFIG_DWC_OTG_IFX) := dwc_otg_ifx.o
-+#dwc_otg_ifx-objs := dwc_otg_ifx.o
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_attr.c
-@@ -0,0 +1,802 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_attr.c $
-+ * $Revision: 1.1.1.1 $
-+ * $Date: 2009-04-17 06:15:34 $
-+ * $Change: 537387 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+/** @file
-+ *
-+ * The diagnostic interface will provide access to the controller for
-+ * bringing up the hardware and testing. The Linux driver attributes
-+ * feature will be used to provide the Linux Diagnostic
-+ * Interface. These attributes are accessed through sysfs.
-+ */
-+
-+/** @page "Linux Module Attributes"
-+ *
-+ * The Linux module attributes feature is used to provide the Linux
-+ * Diagnostic Interface. These attributes are accessed through sysfs.
-+ * The diagnostic interface will provide access to the controller for
-+ * bringing up the hardware and testing.
-+
-+
-+ The following table shows the attributes.
-+ <table>
-+ <tr>
-+ <td><b> Name</b></td>
-+ <td><b> Description</b></td>
-+ <td><b> Access</b></td>
-+ </tr>
-+
-+ <tr>
-+ <td> mode </td>
-+ <td> Returns the current mode: 0 for device mode, 1 for host mode</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hnpcapable </td>
-+ <td> Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register.
-+ Read returns the current value.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> srpcapable </td>
-+ <td> Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register.
-+ Read returns the current value.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hnp </td>
-+ <td> Initiates the Host Negotiation Protocol. Read returns the status.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> srp </td>
-+ <td> Initiates the Session Request Protocol. Read returns the status.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> buspower </td>
-+ <td> Gets or sets the Power State of the bus (0 - Off or 1 - On)</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> bussuspend </td>
-+ <td> Suspends the USB bus.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> busconnected </td>
-+ <td> Gets the connection status of the bus</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> gotgctl </td>
-+ <td> Gets or sets the Core Control Status Register.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> gusbcfg </td>
-+ <td> Gets or sets the Core USB Configuration Register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> grxfsiz </td>
-+ <td> Gets or sets the Receive FIFO Size Register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> gnptxfsiz </td>
-+ <td> Gets or sets the non-periodic Transmit Size Register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> gpvndctl </td>
-+ <td> Gets or sets the PHY Vendor Control Register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> ggpio </td>
-+ <td> Gets the value in the lower 16-bits of the General Purpose IO Register
-+ or sets the upper 16 bits.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> guid </td>
-+ <td> Gets or sets the value of the User ID Register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> gsnpsid </td>
-+ <td> Gets the value of the Synopsys ID Regester</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> devspeed </td>
-+ <td> Gets or sets the device speed setting in the DCFG register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> enumspeed </td>
-+ <td> Gets the device enumeration Speed.</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hptxfsiz </td>
-+ <td> Gets the value of the Host Periodic Transmit FIFO</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hprt0 </td>
-+ <td> Gets or sets the value in the Host Port Control and Status Register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> regoffset </td>
-+ <td> Sets the register offset for the next Register Access</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> regvalue </td>
-+ <td> Gets or sets the value of the register at the offset in the regoffset attribute.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> remote_wakeup </td>
-+ <td> On read, shows the status of Remote Wakeup. On write, initiates a remote
-+ wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote
-+ Wakeup signalling bit in the Device Control Register is set for 1
-+ milli-second.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> regdump </td>
-+ <td> Dumps the contents of core registers.</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hcddump </td>
-+ <td> Dumps the current HCD state.</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hcd_frrem </td>
-+ <td> Shows the average value of the Frame Remaining
-+ field in the Host Frame Number/Frame Remaining register when an SOF interrupt
-+ occurs. This can be used to determine the average interrupt latency. Also
-+ shows the average Frame Remaining value for start_transfer and the "a" and
-+ "b" sample points. The "a" and "b" sample points may be used during debugging
-+ bto determine how long it takes to execute a section of the HCD code.</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> rd_reg_test </td>
-+ <td> Displays the time required to read the GNPTXFSIZ register many times
-+ (the output shows the number of times the register is read).
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> wr_reg_test </td>
-+ <td> Displays the time required to write the GNPTXFSIZ register many times
-+ (the output shows the number of times the register is written).
-+ <td> Read</td>
-+ </tr>
-+
-+ </table>
-+
-+ Example usage:
-+ To get the current mode:
-+ cat /sys/devices/lm0/mode
-+
-+ To power down the USB:
-+ echo 0 > /sys/devices/lm0/buspower
-+ */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/errno.h>
-+#include <linux/types.h>
-+#include <linux/stat.h> /* permission constants */
-+
-+#include <asm/io.h>
-+
-+#include "dwc_otg_plat.h"
-+#include "dwc_otg_attr.h"
-+#include "dwc_otg_driver.h"
-+// #include "dwc_otg_pcd.h"
-+#include "dwc_otg_hcd.h"
-+
-+// 20070316, winder added.
-+#ifndef SZ_256K
-+#define SZ_256K 0x00040000
-+#endif
-+
-+/*
-+ * MACROs for defining sysfs attribute
-+ */
-+#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
-+{ \
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
-+ uint32_t val; \
-+ val = dwc_read_reg32 (_addr_); \
-+ val = (val & (_mask_)) >> _shift_; \
-+ return sprintf (buf, "%s = 0x%x\n", _string_, val); \
-+}
-+#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, const char *buf, size_t count) \
-+{ \
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
-+ uint32_t set = simple_strtoul(buf, NULL, 16); \
-+ uint32_t clear = set; \
-+ clear = ((~clear) << _shift_) & _mask_; \
-+ set = (set << _shift_) & _mask_; \
-+ dev_dbg(_dev, "Storing Address=0x%08x Set=0x%08x Clear=0x%08x\n", (uint32_t)_addr_, set, clear); \
-+ dwc_modify_reg32(_addr_, clear, set); \
-+ return count; \
-+}
-+
-+#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
-+
-+#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \
-+DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
-+
-+/*
-+ * MACROs for defining sysfs attribute for 32-bit registers
-+ */
-+#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
-+static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
-+{ \
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
-+ uint32_t val; \
-+ val = dwc_read_reg32 (_addr_); \
-+ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
-+}
-+#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
-+static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, const char *buf, size_t count) \
-+{ \
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\
-+ uint32_t val = simple_strtoul(buf, NULL, 16); \
-+ dev_dbg(_dev, "Storing Address=0x%08x Val=0x%08x\n", (uint32_t)_addr_, val); \
-+ dwc_write_reg32(_addr_, val); \
-+ return count; \
-+}
-+
-+#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \
-+DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
-+DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \
-+DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
-+
-+#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \
-+DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \
-+DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
-+
-+
-+/** @name Functions for Show/Store of Attributes */
-+/**@{*/
-+
-+/**
-+ * Show the register offset of the Register Access.
-+ */
-+static ssize_t regoffset_show( struct device *_dev, struct device_attribute *attr, char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+ return snprintf(buf, sizeof("0xFFFFFFFF\n")+1,"0x%08x\n", otg_dev->reg_offset);
-+}
-+
-+/**
-+ * Set the register offset for the next Register Access Read/Write
-+ */
-+static ssize_t regoffset_store( struct device *_dev, struct device_attribute *attr, const char *buf,
-+ size_t count )
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+ uint32_t offset = simple_strtoul(buf, NULL, 16);
-+ //dev_dbg(_dev, "Offset=0x%08x\n", offset);
-+ if (offset < SZ_256K ) {
-+ otg_dev->reg_offset = offset;
-+ }
-+ else {
-+ dev_err( _dev, "invalid offset\n" );
-+ }
-+
-+ return count;
-+}
-+DEVICE_ATTR(regoffset, S_IRUGO|S_IWUSR, regoffset_show, regoffset_store);
-+
-+/**
-+ * Show the value of the register at the offset in the reg_offset
-+ * attribute.
-+ */
-+static ssize_t regvalue_show( struct device *_dev, struct device_attribute *attr, char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+ uint32_t val;
-+ volatile uint32_t *addr;
-+
-+ if (otg_dev->reg_offset != 0xFFFFFFFF && 0 != otg_dev->base) {
-+ /* Calculate the address */
-+ addr = (uint32_t*)(otg_dev->reg_offset +
-+ (uint8_t*)otg_dev->base);
-+ //dev_dbg(_dev, "@0x%08x\n", (unsigned)addr);
-+ val = dwc_read_reg32( addr );
-+ return snprintf(buf, sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n")+1,
-+ "Reg@0x%06x = 0x%08x\n",
-+ otg_dev->reg_offset, val);
-+ }
-+ else {
-+ dev_err(_dev, "Invalid offset (0x%0x)\n",
-+ otg_dev->reg_offset);
-+ return sprintf(buf, "invalid offset\n" );
-+ }
-+}
-+
-+/**
-+ * Store the value in the register at the offset in the reg_offset
-+ * attribute.
-+ *
-+ */
-+static ssize_t regvalue_store( struct device *_dev, struct device_attribute *attr, const char *buf,
-+ size_t count )
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+ volatile uint32_t * addr;
-+ uint32_t val = simple_strtoul(buf, NULL, 16);
-+ //dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val);
-+ if (otg_dev->reg_offset != 0xFFFFFFFF && 0 != otg_dev->base) {
-+ /* Calculate the address */
-+ addr = (uint32_t*)(otg_dev->reg_offset +
-+ (uint8_t*)otg_dev->base);
-+ //dev_dbg(_dev, "@0x%08x\n", (unsigned)addr);
-+ dwc_write_reg32( addr, val );
-+ }
-+ else {
-+ dev_err(_dev, "Invalid Register Offset (0x%08x)\n",
-+ otg_dev->reg_offset);
-+ }
-+ return count;
-+}
-+DEVICE_ATTR(regvalue, S_IRUGO|S_IWUSR, regvalue_show, regvalue_store);
-+
-+/*
-+ * Attributes
-+ */
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<20),20,"Mode");
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<9),9,"Mode");
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<8),8,"Mode");
-+
-+//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
-+//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected,otg_dev->core_if->host_if->hprt0,0x01,0,"Bus Connected");
-+
-+DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl,&(otg_dev->core_if->core_global_regs->gotgctl),"GOTGCTL");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg,&(otg_dev->core_if->core_global_regs->gusbcfg),"GUSBCFG");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz,&(otg_dev->core_if->core_global_regs->grxfsiz),"GRXFSIZ");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz,&(otg_dev->core_if->core_global_regs->gnptxfsiz),"GNPTXFSIZ");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl,&(otg_dev->core_if->core_global_regs->gpvndctl),"GPVNDCTL");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio,&(otg_dev->core_if->core_global_regs->ggpio),"GGPIO");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(guid,&(otg_dev->core_if->core_global_regs->guid),"GUID");
-+DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid,&(otg_dev->core_if->core_global_regs->gsnpsid),"GSNPSID");
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dcfg),0x3,0,"Device Speed");
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dsts),0x6,1,"Device Enumeration Speed");
-+
-+DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz,&(otg_dev->core_if->core_global_regs->hptxfsiz),"HPTXFSIZ");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0,otg_dev->core_if->host_if->hprt0,"HPRT0");
-+
-+
-+/**
-+ * @todo Add code to initiate the HNP.
-+ */
-+/**
-+ * Show the HNP status bit
-+ */
-+static ssize_t hnp_show( struct device *_dev, struct device_attribute *attr, char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+ gotgctl_data_t val;
-+ val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl));
-+ return sprintf (buf, "HstNegScs = 0x%x\n", val.b.hstnegscs);
-+}
-+
-+/**
-+ * Set the HNP Request bit
-+ */
-+static ssize_t hnp_store( struct device *_dev, struct device_attribute *attr, const char *buf,
-+ size_t count )
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+ uint32_t in = simple_strtoul(buf, NULL, 16);
-+ uint32_t *addr = (uint32_t *)&(otg_dev->core_if->core_global_regs->gotgctl);
-+ gotgctl_data_t mem;
-+ mem.d32 = dwc_read_reg32(addr);
-+ mem.b.hnpreq = in;
-+ dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
-+ dwc_write_reg32(addr, mem.d32);
-+ return count;
-+}
-+DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store);
-+
-+/**
-+ * @todo Add code to initiate the SRP.
-+ */
-+/**
-+ * Show the SRP status bit
-+ */
-+static ssize_t srp_show( struct device *_dev, struct device_attribute *attr, char *buf)
-+{
-+#ifndef DWC_HOST_ONLY
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+ gotgctl_data_t val;
-+ val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl));
-+ return sprintf (buf, "SesReqScs = 0x%x\n", val.b.sesreqscs);
-+#else
-+ return sprintf(buf, "Host Only Mode!\n");
-+#endif
-+}
-+
-+/**
-+ * Set the SRP Request bit
-+ */
-+static ssize_t srp_store( struct device *_dev, struct device_attribute *attr, const char *buf,
-+ size_t count )
-+{
-+#ifndef DWC_HOST_ONLY
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+ dwc_otg_pcd_initiate_srp(otg_dev->pcd);
-+#endif
-+ return count;
-+}
-+DEVICE_ATTR(srp, 0644, srp_show, srp_store);
-+
-+/**
-+ * @todo Need to do more for power on/off?
-+ */
-+/**
-+ * Show the Bus Power status
-+ */
-+static ssize_t buspower_show( struct device *_dev, struct device_attribute *attr, char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+ hprt0_data_t val;
-+ val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0);
-+ return sprintf (buf, "Bus Power = 0x%x\n", val.b.prtpwr);
-+}
-+
-+
-+/**
-+ * Set the Bus Power status
-+ */
-+static ssize_t buspower_store( struct device *_dev, struct device_attribute *attr, const char *buf,
-+ size_t count )
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+ uint32_t on = simple_strtoul(buf, NULL, 16);
-+ uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0;
-+ hprt0_data_t mem;
-+
-+ mem.d32 = dwc_read_reg32(addr);
-+ mem.b.prtpwr = on;
-+
-+ //dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
-+ dwc_write_reg32(addr, mem.d32);
-+
-+ return count;
-+}
-+DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store);
-+
-+/**
-+ * @todo Need to do more for suspend?
-+ */
-+/**
-+ * Show the Bus Suspend status
-+ */
-+static ssize_t bussuspend_show( struct device *_dev, struct device_attribute *attr, char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+ hprt0_data_t val;
-+ val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0);
-+ return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp);
-+}
-+
-+/**
-+ * Set the Bus Suspend status
-+ */
-+static ssize_t bussuspend_store( struct device *_dev, struct device_attribute *attr, const char *buf,
-+ size_t count )
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+ uint32_t in = simple_strtoul(buf, NULL, 16);
-+ uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0;
-+ hprt0_data_t mem;
-+ mem.d32 = dwc_read_reg32(addr);
-+ mem.b.prtsusp = in;
-+ dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32);
-+ dwc_write_reg32(addr, mem.d32);
-+ return count;
-+}
-+DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store);
-+
-+/**
-+ * Show the status of Remote Wakeup.
-+ */
-+static ssize_t remote_wakeup_show( struct device *_dev, struct device_attribute *attr, char *buf)
-+{
-+#ifndef DWC_HOST_ONLY
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+ dctl_data_t val;
-+ val.d32 = dwc_read_reg32( &otg_dev->core_if->dev_if->dev_global_regs->dctl);
-+ return sprintf( buf, "Remote Wakeup = %d Enabled = %d\n",
-+ val.b.rmtwkupsig, otg_dev->pcd->remote_wakeup_enable);
-+#else
-+ return sprintf(buf, "Host Only Mode!\n");
-+#endif
-+}
-+
-+/**
-+ * Initiate a remote wakeup of the host. The Device control register
-+ * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable
-+ * flag is set.
-+ *
-+ */
-+static ssize_t remote_wakeup_store( struct device *_dev, struct device_attribute *attr, const char *buf,
-+ size_t count )
-+{
-+#ifndef DWC_HOST_ONLY
-+ uint32_t val = simple_strtoul(buf, NULL, 16);
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+ if (val&1) {
-+ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1);
-+ }
-+ else {
-+ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0);
-+ }
-+#endif
-+ return count;
-+}
-+DEVICE_ATTR(remote_wakeup, S_IRUGO|S_IWUSR, remote_wakeup_show,
-+ remote_wakeup_store);
-+
-+/**
-+ * Dump global registers and either host or device registers (depending on the
-+ * current mode of the core).
-+ */
-+static ssize_t regdump_show( struct device *_dev, struct device_attribute *attr, char *buf)
-+{
-+#ifdef DEBUG
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+ printk("%s otg_dev=0x%p\n", __FUNCTION__, otg_dev);
-+
-+ dwc_otg_dump_global_registers( otg_dev->core_if);
-+ if (dwc_otg_is_host_mode(otg_dev->core_if)) {
-+ dwc_otg_dump_host_registers( otg_dev->core_if);
-+ } else {
-+ dwc_otg_dump_dev_registers( otg_dev->core_if);
-+ }
-+#endif
-+
-+ return sprintf( buf, "Register Dump\n" );
-+}
-+
-+DEVICE_ATTR(regdump, S_IRUGO|S_IWUSR, regdump_show, 0);
-+
-+/**
-+ * Dump the current hcd state.
-+ */
-+static ssize_t hcddump_show( struct device *_dev, struct device_attribute *attr, char *buf)
-+{
-+#ifndef DWC_DEVICE_ONLY
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+ dwc_otg_hcd_dump_state(otg_dev->hcd);
-+#endif
-+ return sprintf( buf, "HCD Dump\n" );
-+}
-+
-+DEVICE_ATTR(hcddump, S_IRUGO|S_IWUSR, hcddump_show, 0);
-+
-+/**
-+ * Dump the average frame remaining at SOF. This can be used to
-+ * determine average interrupt latency. Frame remaining is also shown for
-+ * start transfer and two additional sample points.
-+ */
-+static ssize_t hcd_frrem_show( struct device *_dev, struct device_attribute *attr, char *buf)
-+{
-+#ifndef DWC_DEVICE_ONLY
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+ dwc_otg_hcd_dump_frrem(otg_dev->hcd);
-+#endif
-+ return sprintf( buf, "HCD Dump Frame Remaining\n" );
-+}
-+
-+DEVICE_ATTR(hcd_frrem, S_IRUGO|S_IWUSR, hcd_frrem_show, 0);
-+
-+/**
-+ * Displays the time required to read the GNPTXFSIZ register many times (the
-+ * output shows the number of times the register is read).
-+ */
-+#define RW_REG_COUNT 10000000
-+#define MSEC_PER_JIFFIE 1000/HZ
-+static ssize_t rd_reg_test_show( struct device *_dev, struct device_attribute *attr, char *buf)
-+{
-+ int i;
-+ int time;
-+ int start_jiffies;
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+
-+ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
-+ HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
-+ start_jiffies = jiffies;
-+ for (i = 0; i < RW_REG_COUNT; i++) {
-+ dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz);
-+ }
-+ time = jiffies - start_jiffies;
-+ return sprintf( buf, "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
-+ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time );
-+}
-+
-+DEVICE_ATTR(rd_reg_test, S_IRUGO|S_IWUSR, rd_reg_test_show, 0);
-+
-+/**
-+ * Displays the time required to write the GNPTXFSIZ register many times (the
-+ * output shows the number of times the register is written).
-+ */
-+static ssize_t wr_reg_test_show( struct device *_dev, struct device_attribute *attr, char *buf)
-+{
-+ int i;
-+ int time;
-+ int start_jiffies;
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+ uint32_t reg_val;
-+
-+ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
-+ HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
-+ reg_val = dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz);
-+ start_jiffies = jiffies;
-+ for (i = 0; i < RW_REG_COUNT; i++) {
-+ dwc_write_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz, reg_val);
-+ }
-+ time = jiffies - start_jiffies;
-+ return sprintf( buf, "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
-+ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time);
-+}
-+
-+DEVICE_ATTR(wr_reg_test, S_IRUGO|S_IWUSR, wr_reg_test_show, 0);
-+/**@}*/
-+
-+/**
-+ * Create the device files
-+ */
-+void dwc_otg_attr_create (struct device *_dev)
-+{
-+ int retval;
-+
-+ retval = device_create_file(_dev, &dev_attr_regoffset);
-+ retval += device_create_file(_dev, &dev_attr_regvalue);
-+ retval += device_create_file(_dev, &dev_attr_mode);
-+ retval += device_create_file(_dev, &dev_attr_hnpcapable);
-+ retval += device_create_file(_dev, &dev_attr_srpcapable);
-+ retval += device_create_file(_dev, &dev_attr_hnp);
-+ retval += device_create_file(_dev, &dev_attr_srp);
-+ retval += device_create_file(_dev, &dev_attr_buspower);
-+ retval += device_create_file(_dev, &dev_attr_bussuspend);
-+ retval += device_create_file(_dev, &dev_attr_busconnected);
-+ retval += device_create_file(_dev, &dev_attr_gotgctl);
-+ retval += device_create_file(_dev, &dev_attr_gusbcfg);
-+ retval += device_create_file(_dev, &dev_attr_grxfsiz);
-+ retval += device_create_file(_dev, &dev_attr_gnptxfsiz);
-+ retval += device_create_file(_dev, &dev_attr_gpvndctl);
-+ retval += device_create_file(_dev, &dev_attr_ggpio);
-+ retval += device_create_file(_dev, &dev_attr_guid);
-+ retval += device_create_file(_dev, &dev_attr_gsnpsid);
-+ retval += device_create_file(_dev, &dev_attr_devspeed);
-+ retval += device_create_file(_dev, &dev_attr_enumspeed);
-+ retval += device_create_file(_dev, &dev_attr_hptxfsiz);
-+ retval += device_create_file(_dev, &dev_attr_hprt0);
-+ retval += device_create_file(_dev, &dev_attr_remote_wakeup);
-+ retval += device_create_file(_dev, &dev_attr_regdump);
-+ retval += device_create_file(_dev, &dev_attr_hcddump);
-+ retval += device_create_file(_dev, &dev_attr_hcd_frrem);
-+ retval += device_create_file(_dev, &dev_attr_rd_reg_test);
-+ retval += device_create_file(_dev, &dev_attr_wr_reg_test);
-+
-+ if(retval != 0)
-+ {
-+ DWC_PRINT("cannot create sysfs device files.\n");
-+ // DWC_PRINT("killing own sysfs device files!\n");
-+ dwc_otg_attr_remove(_dev);
-+ }
-+}
-+
-+/**
-+ * Remove the device files
-+ */
-+void dwc_otg_attr_remove (struct device *_dev)
-+{
-+ device_remove_file(_dev, &dev_attr_regoffset);
-+ device_remove_file(_dev, &dev_attr_regvalue);
-+ device_remove_file(_dev, &dev_attr_mode);
-+ device_remove_file(_dev, &dev_attr_hnpcapable);
-+ device_remove_file(_dev, &dev_attr_srpcapable);
-+ device_remove_file(_dev, &dev_attr_hnp);
-+ device_remove_file(_dev, &dev_attr_srp);
-+ device_remove_file(_dev, &dev_attr_buspower);
-+ device_remove_file(_dev, &dev_attr_bussuspend);
-+ device_remove_file(_dev, &dev_attr_busconnected);
-+ device_remove_file(_dev, &dev_attr_gotgctl);
-+ device_remove_file(_dev, &dev_attr_gusbcfg);
-+ device_remove_file(_dev, &dev_attr_grxfsiz);
-+ device_remove_file(_dev, &dev_attr_gnptxfsiz);
-+ device_remove_file(_dev, &dev_attr_gpvndctl);
-+ device_remove_file(_dev, &dev_attr_ggpio);
-+ device_remove_file(_dev, &dev_attr_guid);
-+ device_remove_file(_dev, &dev_attr_gsnpsid);
-+ device_remove_file(_dev, &dev_attr_devspeed);
-+ device_remove_file(_dev, &dev_attr_enumspeed);
-+ device_remove_file(_dev, &dev_attr_hptxfsiz);
-+ device_remove_file(_dev, &dev_attr_hprt0);
-+ device_remove_file(_dev, &dev_attr_remote_wakeup);
-+ device_remove_file(_dev, &dev_attr_regdump);
-+ device_remove_file(_dev, &dev_attr_hcddump);
-+ device_remove_file(_dev, &dev_attr_hcd_frrem);
-+ device_remove_file(_dev, &dev_attr_rd_reg_test);
-+ device_remove_file(_dev, &dev_attr_wr_reg_test);
-+}
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_attr.h
-@@ -0,0 +1,67 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_attr.h $
-+ * $Revision: 1.1.1.1 $
-+ * $Date: 2009-04-17 06:15:34 $
-+ * $Change: 510275 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+#if !defined(__DWC_OTG_ATTR_H__)
-+#define __DWC_OTG_ATTR_H__
-+
-+/** @file
-+ * This file contains the interface to the Linux device attributes.
-+ */
-+extern struct device_attribute dev_attr_regoffset;
-+extern struct device_attribute dev_attr_regvalue;
-+
-+extern struct device_attribute dev_attr_mode;
-+extern struct device_attribute dev_attr_hnpcapable;
-+extern struct device_attribute dev_attr_srpcapable;
-+extern struct device_attribute dev_attr_hnp;
-+extern struct device_attribute dev_attr_srp;
-+extern struct device_attribute dev_attr_buspower;
-+extern struct device_attribute dev_attr_bussuspend;
-+extern struct device_attribute dev_attr_busconnected;
-+extern struct device_attribute dev_attr_gotgctl;
-+extern struct device_attribute dev_attr_gusbcfg;
-+extern struct device_attribute dev_attr_grxfsiz;
-+extern struct device_attribute dev_attr_gnptxfsiz;
-+extern struct device_attribute dev_attr_gpvndctl;
-+extern struct device_attribute dev_attr_ggpio;
-+extern struct device_attribute dev_attr_guid;
-+extern struct device_attribute dev_attr_gsnpsid;
-+extern struct device_attribute dev_attr_devspeed;
-+extern struct device_attribute dev_attr_enumspeed;
-+extern struct device_attribute dev_attr_hptxfsiz;
-+extern struct device_attribute dev_attr_hprt0;
-+
-+void dwc_otg_attr_create (struct device *_dev);
-+void dwc_otg_attr_remove (struct device *_dev);
-+
-+#endif
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_cil.c
-@@ -0,0 +1,3025 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_cil.c $
-+ * $Revision: 1.1.1.1 $
-+ * $Date: 2009-04-17 06:15:34 $
-+ * $Change: 631780 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+/** @file
-+ *
-+ * The Core Interface Layer provides basic services for accessing and
-+ * managing the DWC_otg hardware. These services are used by both the
-+ * Host Controller Driver and the Peripheral Controller Driver.
-+ *
-+ * The CIL manages the memory map for the core so that the HCD and PCD
-+ * don't have to do this separately. It also handles basic tasks like
-+ * reading/writing the registers and data FIFOs in the controller.
-+ * Some of the data access functions provide encapsulation of several
-+ * operations required to perform a task, such as writing multiple
-+ * registers to start a transfer. Finally, the CIL performs basic
-+ * services that are not specific to either the host or device modes
-+ * of operation. These services include management of the OTG Host
-+ * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A
-+ * Diagnostic API is also provided to allow testing of the controller
-+ * hardware.
-+ *
-+ * The Core Interface Layer has the following requirements:
-+ * - Provides basic controller operations.
-+ * - Minimal use of OS services.
-+ * - The OS services used will be abstracted by using inline functions
-+ * or macros.
-+ *
-+ */
-+#include <asm/unaligned.h>
-+
-+#ifdef DEBUG
-+#include <linux/jiffies.h>
-+#endif
-+
-+#include "dwc_otg_plat.h"
-+
-+#include "dwc_otg_regs.h"
-+#include "dwc_otg_cil.h"
-+
-+/**
-+ * This function is called to initialize the DWC_otg CSR data
-+ * structures. The register addresses in the device and host
-+ * structures are initialized from the base address supplied by the
-+ * caller. The calling function must make the OS calls to get the
-+ * base address of the DWC_otg controller registers. The core_params
-+ * argument holds the parameters that specify how the core should be
-+ * configured.
-+ *
-+ * @param[in] _reg_base_addr Base address of DWC_otg core registers
-+ * @param[in] _core_params Pointer to the core configuration parameters
-+ *
-+ */
-+dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *_reg_base_addr,
-+ dwc_otg_core_params_t *_core_params)
-+{
-+ dwc_otg_core_if_t *core_if = 0;
-+ dwc_otg_dev_if_t *dev_if = 0;
-+ dwc_otg_host_if_t *host_if = 0;
-+ uint8_t *reg_base = (uint8_t *)_reg_base_addr;
-+ int i = 0;
-+
-+ DWC_DEBUGPL(DBG_CILV, "%s(%p,%p)\n", __func__, _reg_base_addr, _core_params);
-+
-+ core_if = kmalloc( sizeof(dwc_otg_core_if_t), GFP_KERNEL);
-+ if (core_if == 0) {
-+ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_core_if_t failed\n");
-+ return 0;
-+ }
-+ memset(core_if, 0, sizeof(dwc_otg_core_if_t));
-+
-+ core_if->core_params = _core_params;
-+ core_if->core_global_regs = (dwc_otg_core_global_regs_t *)reg_base;
-+ /*
-+ * Allocate the Device Mode structures.
-+ */
-+ dev_if = kmalloc( sizeof(dwc_otg_dev_if_t), GFP_KERNEL);
-+ if (dev_if == 0) {
-+ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n");
-+ kfree( core_if );
-+ return 0;
-+ }
-+
-+ dev_if->dev_global_regs =
-+ (dwc_otg_device_global_regs_t *)(reg_base + DWC_DEV_GLOBAL_REG_OFFSET);
-+
-+ for (i=0; i<MAX_EPS_CHANNELS; i++) {
-+ dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *)
-+ (reg_base + DWC_DEV_IN_EP_REG_OFFSET +
-+ (i * DWC_EP_REG_OFFSET));
-+
-+ dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *)
-+ (reg_base + DWC_DEV_OUT_EP_REG_OFFSET +
-+ (i * DWC_EP_REG_OFFSET));
-+ DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n",
-+ i, &dev_if->in_ep_regs[i]->diepctl);
-+ DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n",
-+ i, &dev_if->out_ep_regs[i]->doepctl);
-+ }
-+ dev_if->speed = 0; // unknown
-+ //dev_if->num_eps = MAX_EPS_CHANNELS;
-+ //dev_if->num_perio_eps = 0;
-+
-+ core_if->dev_if = dev_if;
-+ /*
-+ * Allocate the Host Mode structures.
-+ */
-+ host_if = kmalloc( sizeof(dwc_otg_host_if_t), GFP_KERNEL);
-+ if (host_if == 0) {
-+ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_host_if_t failed\n");
-+ kfree( dev_if );
-+ kfree( core_if );
-+ return 0;
-+ }
-+
-+ host_if->host_global_regs = (dwc_otg_host_global_regs_t *)
-+ (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET);
-+ host_if->hprt0 = (uint32_t*)(reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET);
-+ for (i=0; i<MAX_EPS_CHANNELS; i++) {
-+ host_if->hc_regs[i] = (dwc_otg_hc_regs_t *)
-+ (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET +
-+ (i * DWC_OTG_CHAN_REGS_OFFSET));
-+ DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n",
-+ i, &host_if->hc_regs[i]->hcchar);
-+ }
-+ host_if->num_host_channels = MAX_EPS_CHANNELS;
-+ core_if->host_if = host_if;
-+
-+ for (i=0; i<MAX_EPS_CHANNELS; i++) {
-+ core_if->data_fifo[i] =
-+ (uint32_t *)(reg_base + DWC_OTG_DATA_FIFO_OFFSET +
-+ (i * DWC_OTG_DATA_FIFO_SIZE));
-+ DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08x\n",
-+ i, (unsigned)core_if->data_fifo[i]);
-+ } // for loop.
-+
-+ core_if->pcgcctl = (uint32_t*)(reg_base + DWC_OTG_PCGCCTL_OFFSET);
-+
-+ /*
-+ * Store the contents of the hardware configuration registers here for
-+ * easy access later.
-+ */
-+ core_if->hwcfg1.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg1);
-+ core_if->hwcfg2.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg2);
-+ core_if->hwcfg3.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg3);
-+ core_if->hwcfg4.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg4);
-+
-+ DWC_DEBUGPL(DBG_CILV,"hwcfg1=%08x\n",core_if->hwcfg1.d32);
-+ DWC_DEBUGPL(DBG_CILV,"hwcfg2=%08x\n",core_if->hwcfg2.d32);
-+ DWC_DEBUGPL(DBG_CILV,"hwcfg3=%08x\n",core_if->hwcfg3.d32);
-+ DWC_DEBUGPL(DBG_CILV,"hwcfg4=%08x\n",core_if->hwcfg4.d32);
-+
-+
-+ DWC_DEBUGPL(DBG_CILV,"op_mode=%0x\n",core_if->hwcfg2.b.op_mode);
-+ DWC_DEBUGPL(DBG_CILV,"arch=%0x\n",core_if->hwcfg2.b.architecture);
-+ DWC_DEBUGPL(DBG_CILV,"num_dev_ep=%d\n",core_if->hwcfg2.b.num_dev_ep);
-+ DWC_DEBUGPL(DBG_CILV,"num_host_chan=%d\n",core_if->hwcfg2.b.num_host_chan);
-+ DWC_DEBUGPL(DBG_CILV,"nonperio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.nonperio_tx_q_depth);
-+ DWC_DEBUGPL(DBG_CILV,"host_perio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.host_perio_tx_q_depth);
-+ DWC_DEBUGPL(DBG_CILV,"dev_token_q_depth=0x%0x\n",core_if->hwcfg2.b.dev_token_q_depth);
-+
-+ DWC_DEBUGPL(DBG_CILV,"Total FIFO SZ=%d\n", core_if->hwcfg3.b.dfifo_depth);
-+ DWC_DEBUGPL(DBG_CILV,"xfer_size_cntr_width=%0x\n", core_if->hwcfg3.b.xfer_size_cntr_width);
-+
-+ /*
-+ * Set the SRP sucess bit for FS-I2c
-+ */
-+ core_if->srp_success = 0;
-+ core_if->srp_timer_started = 0;
-+
-+ return core_if;
-+}
-+/**
-+ * This function frees the structures allocated by dwc_otg_cil_init().
-+ *
-+ * @param[in] _core_if The core interface pointer returned from
-+ * dwc_otg_cil_init().
-+ *
-+ */
-+void dwc_otg_cil_remove( dwc_otg_core_if_t *_core_if )
-+{
-+ /* Disable all interrupts */
-+ dwc_modify_reg32( &_core_if->core_global_regs->gahbcfg, 1, 0);
-+ dwc_write_reg32( &_core_if->core_global_regs->gintmsk, 0);
-+
-+ if ( _core_if->dev_if ) {
-+ kfree( _core_if->dev_if );
-+ }
-+ if ( _core_if->host_if ) {
-+ kfree( _core_if->host_if );
-+ }
-+ kfree( _core_if );
-+}
-+
-+/**
-+ * This function enables the controller's Global Interrupt in the AHB Config
-+ * register.
-+ *
-+ * @param[in] _core_if Programming view of DWC_otg controller.
-+ */
-+extern void dwc_otg_enable_global_interrupts( dwc_otg_core_if_t *_core_if )
-+{
-+ gahbcfg_data_t ahbcfg = { .d32 = 0};
-+ ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
-+ dwc_modify_reg32(&_core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32);
-+}
-+/**
-+ * This function disables the controller's Global Interrupt in the AHB Config
-+ * register.
-+ *
-+ * @param[in] _core_if Programming view of DWC_otg controller.
-+ */
-+extern void dwc_otg_disable_global_interrupts( dwc_otg_core_if_t *_core_if )
-+{
-+ gahbcfg_data_t ahbcfg = { .d32 = 0};
-+ ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
-+ dwc_modify_reg32(&_core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
-+}
-+
-+/**
-+ * This function initializes the commmon interrupts, used in both
-+ * device and host modes.
-+ *
-+ * @param[in] _core_if Programming view of the DWC_otg controller
-+ *
-+ */
-+static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t *_core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs =
-+ _core_if->core_global_regs;
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+ /* Clear any pending OTG Interrupts */
-+ dwc_write_reg32( &global_regs->gotgint, 0xFFFFFFFF);
-+ /* Clear any pending interrupts */
-+ dwc_write_reg32( &global_regs->gintsts, 0xFFFFFFFF);
-+ /*
-+ * Enable the interrupts in the GINTMSK.
-+ */
-+ intr_mask.b.modemismatch = 1;
-+ intr_mask.b.otgintr = 1;
-+ if (!_core_if->dma_enable) {
-+ intr_mask.b.rxstsqlvl = 1;
-+ }
-+ intr_mask.b.conidstschng = 1;
-+ intr_mask.b.wkupintr = 1;
-+ intr_mask.b.disconnect = 1;
-+ intr_mask.b.usbsuspend = 1;
-+ intr_mask.b.sessreqintr = 1;
-+ dwc_write_reg32( &global_regs->gintmsk, intr_mask.d32);
-+}
-+
-+/**
-+ * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY
-+ * type.
-+ */
-+static void init_fslspclksel(dwc_otg_core_if_t *_core_if)
-+{
-+ uint32_t val;
-+ hcfg_data_t hcfg;
-+
-+ if (((_core_if->hwcfg2.b.hs_phy_type == 2) &&
-+ (_core_if->hwcfg2.b.fs_phy_type == 1) &&
-+ (_core_if->core_params->ulpi_fs_ls)) ||
-+ (_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS))
-+ {
-+ /* Full speed PHY */
-+ val = DWC_HCFG_48_MHZ;
-+ } else {
-+ /* High speed PHY running at full speed or high speed */
-+ val = DWC_HCFG_30_60_MHZ;
-+ }
-+
-+ DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val);
-+ hcfg.d32 = dwc_read_reg32(&_core_if->host_if->host_global_regs->hcfg);
-+ hcfg.b.fslspclksel = val;
-+ dwc_write_reg32(&_core_if->host_if->host_global_regs->hcfg, hcfg.d32);
-+}
-+
-+/**
-+ * Initializes the DevSpd field of the DCFG register depending on the PHY type
-+ * and the enumeration speed of the device.
-+ */
-+static void init_devspd(dwc_otg_core_if_t *_core_if)
-+{
-+ uint32_t val;
-+ dcfg_data_t dcfg;
-+
-+ if (((_core_if->hwcfg2.b.hs_phy_type == 2) &&
-+ (_core_if->hwcfg2.b.fs_phy_type == 1) &&
-+ (_core_if->core_params->ulpi_fs_ls)) ||
-+ (_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS))
-+ {
-+ /* Full speed PHY */
-+ val = 0x3;
-+ } else if (_core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
-+ /* High speed PHY running at full speed */
-+ val = 0x1;
-+ } else {
-+ /* High speed PHY running at high speed */
-+ val = 0x0;
-+ }
-+
-+ DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val);
-+ dcfg.d32 = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->dcfg);
-+ dcfg.b.devspd = val;
-+ dwc_write_reg32(&_core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
-+}
-+
-+/**
-+ * This function calculates the number of IN EPS
-+ * using GHWCFG1 and GHWCFG2 registers values
-+ *
-+ * @param _pcd the pcd structure.
-+ */
-+static uint32_t calc_num_in_eps(dwc_otg_core_if_t * _core_if)
-+{
-+ uint32_t num_in_eps = 0;
-+ uint32_t num_eps = _core_if->hwcfg2.b.num_dev_ep;
-+ uint32_t hwcfg1 = _core_if->hwcfg1.d32 >> 2;
-+ uint32_t num_tx_fifos = _core_if->hwcfg4.b.num_in_eps;
-+ int i;
-+ for (i = 0; i < num_eps; ++i) {
-+ if (!(hwcfg1 & 0x1))
-+ num_in_eps++;
-+ hwcfg1 >>= 2;
-+ }
-+ if (_core_if->hwcfg4.b.ded_fifo_en) {
-+ num_in_eps = (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps;
-+ }
-+ return num_in_eps;
-+}
-+
-+
-+/**
-+ * This function calculates the number of OUT EPS
-+ * using GHWCFG1 and GHWCFG2 registers values
-+ *
-+ * @param _pcd the pcd structure.
-+ */
-+static uint32_t calc_num_out_eps(dwc_otg_core_if_t * _core_if)
-+{
-+ uint32_t num_out_eps = 0;
-+ uint32_t num_eps = _core_if->hwcfg2.b.num_dev_ep;
-+ uint32_t hwcfg1 = _core_if->hwcfg1.d32 >> 2;
-+ int i;
-+ for (i = 0; i < num_eps; ++i) {
-+ if (!(hwcfg1 & 0x2))
-+ num_out_eps++;
-+ hwcfg1 >>= 2;
-+ }
-+ return num_out_eps;
-+}
-+/**
-+ * This function initializes the DWC_otg controller registers and
-+ * prepares the core for device mode or host mode operation.
-+ *
-+ * @param _core_if Programming view of the DWC_otg controller
-+ *
-+ */
-+void dwc_otg_core_init(dwc_otg_core_if_t *_core_if)
-+{
-+ dwc_otg_core_global_regs_t * global_regs = _core_if->core_global_regs;
-+ dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
-+ int i = 0;
-+ gahbcfg_data_t ahbcfg = { .d32 = 0};
-+ gusbcfg_data_t usbcfg = { .d32 = 0 };
-+ gi2cctl_data_t i2cctl = {.d32 = 0};
-+
-+ DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p)\n",_core_if);
-+
-+ /* Common Initialization */
-+
-+ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-+ DWC_DEBUGPL(DBG_CIL, "USB config register: 0x%08x\n", usbcfg.d32);
-+
-+ /* Program the ULPI External VBUS bit if needed */
-+ //usbcfg.b.ulpi_ext_vbus_drv = 1;
-+ //usbcfg.b.ulpi_ext_vbus_drv = 0;
-+ usbcfg.b.ulpi_ext_vbus_drv =
-+ (_core_if->core_params->phy_ulpi_ext_vbus == DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0;
-+
-+ /* Set external TS Dline pulsing */
-+ usbcfg.b.term_sel_dl_pulse = (_core_if->core_params->ts_dline == 1) ? 1 : 0;
-+ dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
-+
-+ /* Reset the Controller */
-+ dwc_otg_core_reset( _core_if );
-+
-+ /* Initialize parameters from Hardware configuration registers. */
-+#if 0
-+ dev_if->num_eps = _core_if->hwcfg2.b.num_dev_ep;
-+ dev_if->num_perio_eps = _core_if->hwcfg4.b.num_dev_perio_in_ep;
-+#else
-+ dev_if->num_in_eps = calc_num_in_eps(_core_if);
-+ dev_if->num_out_eps = calc_num_out_eps(_core_if);
-+#endif
-+ DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n",
-+ _core_if->hwcfg4.b.num_dev_perio_in_ep);
-+ DWC_DEBUGPL(DBG_CIL, "Is power optimization enabled? %s\n",
-+ _core_if->hwcfg4.b.power_optimiz ? "Yes" : "No");
-+ DWC_DEBUGPL(DBG_CIL, "vbus_valid filter enabled? %s\n",
-+ _core_if->hwcfg4.b.vbus_valid_filt_en ? "Yes" : "No");
-+ DWC_DEBUGPL(DBG_CIL, "iddig filter enabled? %s\n",
-+ _core_if->hwcfg4.b.iddig_filt_en ? "Yes" : "No");
-+
-+ DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n",_core_if->hwcfg4.b.num_dev_perio_in_ep);
-+ for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++) {
-+ dev_if->perio_tx_fifo_size[i] =
-+ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
-+ DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n", i,
-+ dev_if->perio_tx_fifo_size[i]);
-+ }
-+ for (i = 0; i < _core_if->hwcfg4.b.num_in_eps; i++) {
-+ dev_if->tx_fifo_size[i] =
-+ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
-+ DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n", i,
-+ dev_if->perio_tx_fifo_size[i]);
-+ }
-+
-+ _core_if->total_fifo_size = _core_if->hwcfg3.b.dfifo_depth;
-+ _core_if->rx_fifo_size = dwc_read_reg32(&global_regs->grxfsiz);
-+ _core_if->nperio_tx_fifo_size = dwc_read_reg32(&global_regs->gnptxfsiz) >> 16;
-+
-+ DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", _core_if->total_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", _core_if->rx_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n", _core_if->nperio_tx_fifo_size);
-+
-+ /* This programming sequence needs to happen in FS mode before any other
-+ * programming occurs */
-+ if ((_core_if->core_params->speed == DWC_SPEED_PARAM_FULL) &&
-+ (_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
-+ /* If FS mode with FS PHY */
-+
-+ /* core_init() is now called on every switch so only call the
-+ * following for the first time through. */
-+ if (!_core_if->phy_init_done) {
-+ _core_if->phy_init_done = 1;
-+ DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n");
-+ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-+ usbcfg.b.physel = 1;
-+ dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
-+
-+ /* Reset after a PHY select */
-+ dwc_otg_core_reset( _core_if );
-+ }
-+
-+ /* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also
-+ * do this on HNP Dev/Host mode switches (done in dev_init and
-+ * host_init). */
-+ if (dwc_otg_is_host_mode(_core_if)) {
-+ DWC_DEBUGPL(DBG_CIL, "host mode\n");
-+ init_fslspclksel(_core_if);
-+ } else {
-+ DWC_DEBUGPL(DBG_CIL, "device mode\n");
-+ init_devspd(_core_if);
-+ }
-+
-+ if (_core_if->core_params->i2c_enable) {
-+ DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n");
-+ /* Program GUSBCFG.OtgUtmifsSel to I2C */
-+ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-+ usbcfg.b.otgutmifssel = 1;
-+ dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
-+
-+ /* Program GI2CCTL.I2CEn */
-+ i2cctl.d32 = dwc_read_reg32(&global_regs->gi2cctl);
-+ i2cctl.b.i2cdevaddr = 1;
-+ i2cctl.b.i2cen = 0;
-+ dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
-+ i2cctl.b.i2cen = 1;
-+ dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
-+ }
-+
-+ } /* endif speed == DWC_SPEED_PARAM_FULL */
-+ else {
-+ /* High speed PHY. */
-+ if (!_core_if->phy_init_done) {
-+ _core_if->phy_init_done = 1;
-+ DWC_DEBUGPL(DBG_CIL, "High spped PHY\n");
-+ /* HS PHY parameters. These parameters are preserved
-+ * during soft reset so only program the first time. Do
-+ * a soft reset immediately after setting phyif. */
-+ usbcfg.b.ulpi_utmi_sel = _core_if->core_params->phy_type;
-+ if (usbcfg.b.ulpi_utmi_sel == 2) { // winder
-+ DWC_DEBUGPL(DBG_CIL, "ULPI\n");
-+ /* ULPI interface */
-+ usbcfg.b.phyif = 0;
-+ usbcfg.b.ddrsel = _core_if->core_params->phy_ulpi_ddr;
-+ } else {
-+ /* UTMI+ interface */
-+ if (_core_if->core_params->phy_utmi_width == 16) {
-+ usbcfg.b.phyif = 1;
-+ DWC_DEBUGPL(DBG_CIL, "UTMI+ 16\n");
-+ } else {
-+ DWC_DEBUGPL(DBG_CIL, "UTMI+ 8\n");
-+ usbcfg.b.phyif = 0;
-+ }
-+ }
-+ dwc_write_reg32( &global_regs->gusbcfg, usbcfg.d32);
-+
-+ /* Reset after setting the PHY parameters */
-+ dwc_otg_core_reset( _core_if );
-+ }
-+ }
-+
-+ if ((_core_if->hwcfg2.b.hs_phy_type == 2) &&
-+ (_core_if->hwcfg2.b.fs_phy_type == 1) &&
-+ (_core_if->core_params->ulpi_fs_ls))
-+ {
-+ DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n");
-+ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-+ usbcfg.b.ulpi_fsls = 1;
-+ usbcfg.b.ulpi_clk_sus_m = 1;
-+ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
-+ } else {
-+ DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS=0\n");
-+ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
-+ usbcfg.b.ulpi_fsls = 0;
-+ usbcfg.b.ulpi_clk_sus_m = 0;
-+ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
-+ }
-+
-+ /* Program the GAHBCFG Register.*/
-+ switch (_core_if->hwcfg2.b.architecture){
-+
-+ case DWC_SLAVE_ONLY_ARCH:
-+ DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n");
-+ ahbcfg.b.nptxfemplvl_txfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
-+ ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
-+ _core_if->dma_enable = 0;
-+ break;
-+
-+ case DWC_EXT_DMA_ARCH:
-+ DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n");
-+ ahbcfg.b.hburstlen = _core_if->core_params->dma_burst_size;
-+ _core_if->dma_enable = (_core_if->core_params->dma_enable != 0);
-+ break;
-+
-+ case DWC_INT_DMA_ARCH:
-+ DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n");
-+ //ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR;
-+ ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR4;
-+ _core_if->dma_enable = (_core_if->core_params->dma_enable != 0);
-+ break;
-+ }
-+ ahbcfg.b.dmaenable = _core_if->dma_enable;
-+ dwc_write_reg32(&global_regs->gahbcfg, ahbcfg.d32);
-+ _core_if->en_multiple_tx_fifo = _core_if->hwcfg4.b.ded_fifo_en;
-+
-+ /*
-+ * Program the GUSBCFG register.
-+ */
-+ usbcfg.d32 = dwc_read_reg32( &global_regs->gusbcfg );
-+
-+ switch (_core_if->hwcfg2.b.op_mode) {
-+ case DWC_MODE_HNP_SRP_CAPABLE:
-+ usbcfg.b.hnpcap = (_core_if->core_params->otg_cap ==
-+ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE);
-+ usbcfg.b.srpcap = (_core_if->core_params->otg_cap !=
-+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
-+ break;
-+
-+ case DWC_MODE_SRP_ONLY_CAPABLE:
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = (_core_if->core_params->otg_cap !=
-+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
-+ break;
-+
-+ case DWC_MODE_NO_HNP_SRP_CAPABLE:
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = 0;
-+ break;
-+
-+ case DWC_MODE_SRP_CAPABLE_DEVICE:
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = (_core_if->core_params->otg_cap !=
-+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
-+ break;
-+
-+ case DWC_MODE_NO_SRP_CAPABLE_DEVICE:
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = 0;
-+ break;
-+
-+ case DWC_MODE_SRP_CAPABLE_HOST:
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = (_core_if->core_params->otg_cap !=
-+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
-+ break;
-+
-+ case DWC_MODE_NO_SRP_CAPABLE_HOST:
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = 0;
-+ break;
-+ }
-+
-+ dwc_write_reg32( &global_regs->gusbcfg, usbcfg.d32);
-+
-+ /* Enable common interrupts */
-+ dwc_otg_enable_common_interrupts( _core_if );
-+
-+ /* Do device or host intialization based on mode during PCD
-+ * and HCD initialization */
-+ if (dwc_otg_is_host_mode( _core_if )) {
-+ DWC_DEBUGPL(DBG_ANY, "Host Mode\n" );
-+ _core_if->op_state = A_HOST;
-+ } else {
-+ DWC_DEBUGPL(DBG_ANY, "Device Mode\n" );
-+ _core_if->op_state = B_PERIPHERAL;
-+#ifdef DWC_DEVICE_ONLY
-+ dwc_otg_core_dev_init( _core_if );
-+#endif
-+ }
-+}
-+
-+
-+/**
-+ * This function enables the Device mode interrupts.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller
-+ */
-+void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *_core_if)
-+{
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+ dwc_otg_core_global_regs_t * global_regs = _core_if->core_global_regs;
-+
-+ DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
-+
-+ /* Disable all interrupts. */
-+ dwc_write_reg32( &global_regs->gintmsk, 0);
-+
-+ /* Clear any pending interrupts */
-+ dwc_write_reg32( &global_regs->gintsts, 0xFFFFFFFF);
-+
-+ /* Enable the common interrupts */
-+ dwc_otg_enable_common_interrupts( _core_if );
-+
-+ /* Enable interrupts */
-+ intr_mask.b.usbreset = 1;
-+ intr_mask.b.enumdone = 1;
-+ //intr_mask.b.epmismatch = 1;
-+ intr_mask.b.inepintr = 1;
-+ intr_mask.b.outepintr = 1;
-+ intr_mask.b.erlysuspend = 1;
-+ if (_core_if->en_multiple_tx_fifo == 0) {
-+ intr_mask.b.epmismatch = 1;
-+ }
-+
-+ /** @todo NGS: Should this be a module parameter? */
-+ intr_mask.b.isooutdrop = 1;
-+ intr_mask.b.eopframe = 1;
-+ intr_mask.b.incomplisoin = 1;
-+ intr_mask.b.incomplisoout = 1;
-+
-+ dwc_modify_reg32( &global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
-+
-+ DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__,
-+ dwc_read_reg32( &global_regs->gintmsk));
-+}
-+
-+/**
-+ * This function initializes the DWC_otg controller registers for
-+ * device mode.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller
-+ *
-+ */
-+void dwc_otg_core_dev_init(dwc_otg_core_if_t *_core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs =
-+ _core_if->core_global_regs;
-+ dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
-+ dwc_otg_core_params_t *params = _core_if->core_params;
-+ dcfg_data_t dcfg = {.d32 = 0};
-+ grstctl_t resetctl = { .d32=0 };
-+ int i;
-+ uint32_t rx_fifo_size;
-+ fifosize_data_t nptxfifosize;
-+ fifosize_data_t txfifosize;
-+ dthrctl_data_t dthrctl;
-+
-+ fifosize_data_t ptxfifosize;
-+
-+ /* Restart the Phy Clock */
-+ dwc_write_reg32(_core_if->pcgcctl, 0);
-+
-+ /* Device configuration register */
-+ init_devspd(_core_if);
-+ dcfg.d32 = dwc_read_reg32( &dev_if->dev_global_regs->dcfg);
-+ dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80;
-+ dwc_write_reg32( &dev_if->dev_global_regs->dcfg, dcfg.d32 );
-+
-+ /* Configure data FIFO sizes */
-+ if ( _core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo ) {
-+
-+ DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", _core_if->total_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", params->dev_rx_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", params->dev_nperio_tx_fifo_size);
-+
-+ /* Rx FIFO */
-+ DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n",
-+ dwc_read_reg32(&global_regs->grxfsiz));
-+ rx_fifo_size = params->dev_rx_fifo_size;
-+ dwc_write_reg32( &global_regs->grxfsiz, rx_fifo_size );
-+ DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n",
-+ dwc_read_reg32(&global_regs->grxfsiz));
-+
-+ /** Set Periodic Tx FIFO Mask all bits 0 */
-+ _core_if->p_tx_msk = 0;
-+
-+ /** Set Tx FIFO Mask all bits 0 */
-+ _core_if->tx_msk = 0;
-+ if (_core_if->en_multiple_tx_fifo == 0) {
-+ /* Non-periodic Tx FIFO */
-+ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
-+ dwc_read_reg32(&global_regs->gnptxfsiz));
-+ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
-+ nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
-+ dwc_write_reg32( &global_regs->gnptxfsiz, nptxfifosize.d32 );
-+ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
-+ dwc_read_reg32(&global_regs->gnptxfsiz));
-+
-+
-+ /**@todo NGS: Fix Periodic FIFO Sizing! */
-+ /*
-+ * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15.
-+ * Indexes of the FIFO size module parameters in the
-+ * dev_perio_tx_fifo_size array and the FIFO size registers in
-+ * the dptxfsiz array run from 0 to 14.
-+ */
-+ /** @todo Finish debug of this */
-+ ptxfifosize.b.startaddr =
-+ nptxfifosize.b.startaddr + nptxfifosize.b.depth;
-+ for (i = 0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep;i++) {
-+ ptxfifosize.b.depth = params->dev_perio_tx_fifo_size[i];
-+ DWC_DEBUGPL(DBG_CIL,"initial dptxfsiz_dieptxf[%d]=%08x\n",
-+ i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
-+ dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i],ptxfifosize.d32);
-+ DWC_DEBUGPL(DBG_CIL,"new dptxfsiz_dieptxf[%d]=%08x\n",
-+ i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
-+ ptxfifosize.b.startaddr += ptxfifosize.b.depth;
-+ }
-+ } else {
-+
-+ /*
-+ * Tx FIFOs These FIFOs are numbered from 1 to 15.
-+ * Indexes of the FIFO size module parameters in the
-+ * dev_tx_fifo_size array and the FIFO size registers in
-+ * the dptxfsiz_dieptxf array run from 0 to 14.
-+ */
-+
-+ /* Non-periodic Tx FIFO */
-+ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
-+ dwc_read_reg32(&global_regs->gnptxfsiz));
-+ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
-+ nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
-+ dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
-+ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
-+ dwc_read_reg32(&global_regs->gnptxfsiz));
-+ txfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
-+ for (i = 1;i < _core_if->hwcfg4.b.num_dev_perio_in_ep;i++) {
-+ txfifosize.b.depth = params->dev_tx_fifo_size[i];
-+ DWC_DEBUGPL(DBG_CIL,"initial dptxfsiz_dieptxf[%d]=%08x\n",
-+ i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
-+ dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i - 1],txfifosize.d32);
-+ DWC_DEBUGPL(DBG_CIL,"new dptxfsiz_dieptxf[%d]=%08x\n",
-+ i,dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i-1]));
-+ txfifosize.b.startaddr += txfifosize.b.depth;
-+ }
-+ }
-+ }
-+ /* Flush the FIFOs */
-+ dwc_otg_flush_tx_fifo(_core_if, 0x10); /* all Tx FIFOs */
-+ dwc_otg_flush_rx_fifo(_core_if);
-+
-+ /* Flush the Learning Queue. */
-+ resetctl.b.intknqflsh = 1;
-+ dwc_write_reg32( &_core_if->core_global_regs->grstctl, resetctl.d32);
-+
-+ /* Clear all pending Device Interrupts */
-+ dwc_write_reg32( &dev_if->dev_global_regs->diepmsk, 0 );
-+ dwc_write_reg32( &dev_if->dev_global_regs->doepmsk, 0 );
-+ dwc_write_reg32( &dev_if->dev_global_regs->daint, 0xFFFFFFFF );
-+ dwc_write_reg32( &dev_if->dev_global_regs->daintmsk, 0 );
-+
-+ for (i = 0; i <= dev_if->num_in_eps; i++) {
-+ depctl_data_t depctl;
-+ depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
-+ if (depctl.b.epena) {
-+ depctl.d32 = 0;
-+ depctl.b.epdis = 1;
-+ depctl.b.snak = 1;
-+ } else {
-+ depctl.d32 = 0;
-+ }
-+ dwc_write_reg32( &dev_if->in_ep_regs[i]->diepctl, depctl.d32);
-+
-+ dwc_write_reg32(&dev_if->in_ep_regs[i]->dieptsiz, 0);
-+ dwc_write_reg32(&dev_if->in_ep_regs[i]->diepdma, 0);
-+ dwc_write_reg32(&dev_if->in_ep_regs[i]->diepint, 0xFF);
-+ }
-+ for (i = 0; i <= dev_if->num_out_eps; i++) {
-+ depctl_data_t depctl;
-+ depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl);
-+ if (depctl.b.epena) {
-+ depctl.d32 = 0;
-+ depctl.b.epdis = 1;
-+ depctl.b.snak = 1;
-+ } else {
-+ depctl.d32 = 0;
-+ }
-+ dwc_write_reg32( &dev_if->out_ep_regs[i]->doepctl, depctl.d32);
-+
-+ //dwc_write_reg32( &dev_if->in_ep_regs[i]->dieptsiz, 0);
-+ dwc_write_reg32( &dev_if->out_ep_regs[i]->doeptsiz, 0);
-+ //dwc_write_reg32( &dev_if->in_ep_regs[i]->diepdma, 0);
-+ dwc_write_reg32( &dev_if->out_ep_regs[i]->doepdma, 0);
-+ //dwc_write_reg32( &dev_if->in_ep_regs[i]->diepint, 0xFF);
-+ dwc_write_reg32( &dev_if->out_ep_regs[i]->doepint, 0xFF);
-+ }
-+
-+ if (_core_if->en_multiple_tx_fifo && _core_if->dma_enable) {
-+ dev_if->non_iso_tx_thr_en = _core_if->core_params->thr_ctl & 0x1;
-+ dev_if->iso_tx_thr_en = (_core_if->core_params->thr_ctl >> 1) & 0x1;
-+ dev_if->rx_thr_en = (_core_if->core_params->thr_ctl >> 2) & 0x1;
-+ dev_if->rx_thr_length = _core_if->core_params->rx_thr_length;
-+ dev_if->tx_thr_length = _core_if->core_params->tx_thr_length;
-+ dthrctl.d32 = 0;
-+ dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en;
-+ dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en;
-+ dthrctl.b.tx_thr_len = dev_if->tx_thr_length;
-+ dthrctl.b.rx_thr_en = dev_if->rx_thr_en;
-+ dthrctl.b.rx_thr_len = dev_if->rx_thr_length;
-+ dwc_write_reg32(&dev_if->dev_global_regs->dtknqr3_dthrctl,dthrctl.d32);
-+ DWC_DEBUGPL(DBG_CIL, "Non ISO Tx Thr - %d\nISO Tx Thr - %d\n"
-+ "Rx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n",
-+ dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en,
-+ dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len,
-+ dthrctl.b.rx_thr_len);
-+ }
-+ dwc_otg_enable_device_interrupts( _core_if );
-+ {
-+ diepmsk_data_t msk = {.d32 = 0};
-+ msk.b.txfifoundrn = 1;
-+ dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, msk.d32,msk.d32);
-+}
-+}
-+
-+/**
-+ * This function enables the Host mode interrupts.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller
-+ */
-+void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *_core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
-+ gintmsk_data_t intr_mask = {.d32 = 0};
-+
-+ DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
-+
-+ /* Disable all interrupts. */
-+ dwc_write_reg32(&global_regs->gintmsk, 0);
-+
-+ /* Clear any pending interrupts. */
-+ dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
-+
-+ /* Enable the common interrupts */
-+ dwc_otg_enable_common_interrupts(_core_if);
-+
-+ /*
-+ * Enable host mode interrupts without disturbing common
-+ * interrupts.
-+ */
-+ intr_mask.b.sofintr = 1;
-+ intr_mask.b.portintr = 1;
-+ intr_mask.b.hcintr = 1;
-+
-+ //dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
-+ //dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
-+ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
-+}
-+
-+/**
-+ * This function disables the Host Mode interrupts.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller
-+ */
-+void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *_core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs =
-+ _core_if->core_global_regs;
-+ gintmsk_data_t intr_mask = {.d32 = 0};
-+
-+ DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__);
-+
-+ /*
-+ * Disable host mode interrupts without disturbing common
-+ * interrupts.
-+ */
-+ intr_mask.b.sofintr = 1;
-+ intr_mask.b.portintr = 1;
-+ intr_mask.b.hcintr = 1;
-+ intr_mask.b.ptxfempty = 1;
-+ intr_mask.b.nptxfempty = 1;
-+
-+ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
-+}
-+
-+#if 0
-+/* currently not used, keep it here as if needed later */
-+static int phy_read(dwc_otg_core_if_t * _core_if, int addr)
-+{
-+ u32 val;
-+ int timeout = 10;
-+
-+ dwc_write_reg32(&_core_if->core_global_regs->gpvndctl,
-+ 0x02000000 | (addr << 16));
-+ val = dwc_read_reg32(&_core_if->core_global_regs->gpvndctl);
-+ while (((val & 0x08000000) == 0) && (timeout--)) {
-+ udelay(1000);
-+ val = dwc_read_reg32(&_core_if->core_global_regs->gpvndctl);
-+ }
-+ val = dwc_read_reg32(&_core_if->core_global_regs->gpvndctl);
-+ printk("%s: addr=%02x regval=%02x\n", __func__, addr, val & 0x000000ff);
-+
-+ return 0;
-+}
-+#endif
-+
-+/**
-+ * This function initializes the DWC_otg controller registers for
-+ * host mode.
-+ *
-+ * This function flushes the Tx and Rx FIFOs and it flushes any entries in the
-+ * request queues. Host channels are reset to ensure that they are ready for
-+ * performing transfers.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller
-+ *
-+ */
-+void dwc_otg_core_host_init(dwc_otg_core_if_t *_core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
-+ dwc_otg_host_if_t *host_if = _core_if->host_if;
-+ dwc_otg_core_params_t *params = _core_if->core_params;
-+ hprt0_data_t hprt0 = {.d32 = 0};
-+ fifosize_data_t nptxfifosize;
-+ fifosize_data_t ptxfifosize;
-+ int i;
-+ hcchar_data_t hcchar;
-+ hcfg_data_t hcfg;
-+ dwc_otg_hc_regs_t *hc_regs;
-+ int num_channels;
-+ gotgctl_data_t gotgctl = {.d32 = 0};
-+
-+ DWC_DEBUGPL(DBG_CILV,"%s(%p)\n", __func__, _core_if);
-+
-+ /* Restart the Phy Clock */
-+ dwc_write_reg32(_core_if->pcgcctl, 0);
-+
-+ /* Initialize Host Configuration Register */
-+ init_fslspclksel(_core_if);
-+ if (_core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
-+ hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
-+ hcfg.b.fslssupp = 1;
-+ dwc_write_reg32(&host_if->host_global_regs->hcfg, hcfg.d32);
-+ }
-+
-+ /* Configure data FIFO sizes */
-+ if (_core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
-+ DWC_DEBUGPL(DBG_CIL,"Total FIFO Size=%d\n", _core_if->total_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL,"Rx FIFO Size=%d\n", params->host_rx_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL,"NP Tx FIFO Size=%d\n", params->host_nperio_tx_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL,"P Tx FIFO Size=%d\n", params->host_perio_tx_fifo_size);
-+
-+ /* Rx FIFO */
-+ DWC_DEBUGPL(DBG_CIL,"initial grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
-+ dwc_write_reg32(&global_regs->grxfsiz, params->host_rx_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL,"new grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
-+
-+ /* Non-periodic Tx FIFO */
-+ DWC_DEBUGPL(DBG_CIL,"initial gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
-+ nptxfifosize.b.depth = params->host_nperio_tx_fifo_size;
-+ nptxfifosize.b.startaddr = params->host_rx_fifo_size;
-+ dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
-+ DWC_DEBUGPL(DBG_CIL,"new gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
-+
-+ /* Periodic Tx FIFO */
-+ DWC_DEBUGPL(DBG_CIL,"initial hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
-+ ptxfifosize.b.depth = params->host_perio_tx_fifo_size;
-+ ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
-+ dwc_write_reg32(&global_regs->hptxfsiz, ptxfifosize.d32);
-+ DWC_DEBUGPL(DBG_CIL,"new hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
-+ }
-+
-+ /* Clear Host Set HNP Enable in the OTG Control Register */
-+ gotgctl.b.hstsethnpen = 1;
-+ dwc_modify_reg32( &global_regs->gotgctl, gotgctl.d32, 0);
-+
-+ /* Make sure the FIFOs are flushed. */
-+ dwc_otg_flush_tx_fifo(_core_if, 0x10 /* all Tx FIFOs */);
-+ dwc_otg_flush_rx_fifo(_core_if);
-+
-+ /* Flush out any leftover queued requests. */
-+ num_channels = _core_if->core_params->host_channels;
-+ for (i = 0; i < num_channels; i++) {
-+ hc_regs = _core_if->host_if->hc_regs[i];
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcchar.b.chen = 0;
-+ hcchar.b.chdis = 1;
-+ hcchar.b.epdir = 0;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+ }
-+
-+ /* Halt all channels to put them into a known state. */
-+ for (i = 0; i < num_channels; i++) {
-+ int count = 0;
-+ hc_regs = _core_if->host_if->hc_regs[i];
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcchar.b.chen = 1;
-+ hcchar.b.chdis = 1;
-+ hcchar.b.epdir = 0;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d\n", __func__, i);
-+ do {
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (++count > 200) {
-+ DWC_ERROR("%s: Unable to clear halt on channel %d\n",
-+ __func__, i);
-+ break;
-+ }
-+ udelay(100);
-+ } while (hcchar.b.chen);
-+ }
-+
-+ /* Turn on the vbus power. */
-+ DWC_PRINT("Init: Port Power? op_state=%d\n", _core_if->op_state);
-+ if (_core_if->op_state == A_HOST){
-+ hprt0.d32 = dwc_otg_read_hprt0(_core_if);
-+ DWC_PRINT("Init: Power Port (%d)\n", hprt0.b.prtpwr);
-+ if (hprt0.b.prtpwr == 0 ) {
-+ hprt0.b.prtpwr = 1;
-+ dwc_write_reg32(host_if->hprt0, hprt0.d32);
-+ }
-+ }
-+
-+ dwc_otg_enable_host_interrupts( _core_if );
-+}
-+
-+/**
-+ * Prepares a host channel for transferring packets to/from a specific
-+ * endpoint. The HCCHARn register is set up with the characteristics specified
-+ * in _hc. Host channel interrupts that may need to be serviced while this
-+ * transfer is in progress are enabled.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller
-+ * @param _hc Information needed to initialize the host channel
-+ */
-+void dwc_otg_hc_init(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
-+{
-+ uint32_t intr_enable;
-+ hcintmsk_data_t hc_intr_mask;
-+ gintmsk_data_t gintmsk = {.d32 = 0};
-+ hcchar_data_t hcchar;
-+ hcsplt_data_t hcsplt;
-+
-+ uint8_t hc_num = _hc->hc_num;
-+ dwc_otg_host_if_t *host_if = _core_if->host_if;
-+ dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num];
-+
-+ /* Clear old interrupt conditions for this host channel. */
-+ hc_intr_mask.d32 = 0xFFFFFFFF;
-+ hc_intr_mask.b.reserved = 0;
-+ dwc_write_reg32(&hc_regs->hcint, hc_intr_mask.d32);
-+
-+ /* Enable channel interrupts required for this transfer. */
-+ hc_intr_mask.d32 = 0;
-+ hc_intr_mask.b.chhltd = 1;
-+ if (_core_if->dma_enable) {
-+ hc_intr_mask.b.ahberr = 1;
-+ if (_hc->error_state && !_hc->do_split &&
-+ _hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
-+ hc_intr_mask.b.ack = 1;
-+ if (_hc->ep_is_in) {
-+ hc_intr_mask.b.datatglerr = 1;
-+ if (_hc->ep_type != DWC_OTG_EP_TYPE_INTR) {
-+ hc_intr_mask.b.nak = 1;
-+ }
-+ }
-+ }
-+ } else {
-+ switch (_hc->ep_type) {
-+ case DWC_OTG_EP_TYPE_CONTROL:
-+ case DWC_OTG_EP_TYPE_BULK:
-+ hc_intr_mask.b.xfercompl = 1;
-+ hc_intr_mask.b.stall = 1;
-+ hc_intr_mask.b.xacterr = 1;
-+ hc_intr_mask.b.datatglerr = 1;
-+ if (_hc->ep_is_in) {
-+ hc_intr_mask.b.bblerr = 1;
-+ } else {
-+ hc_intr_mask.b.nak = 1;
-+ hc_intr_mask.b.nyet = 1;
-+ if (_hc->do_ping) {
-+ hc_intr_mask.b.ack = 1;
-+ }
-+ }
-+
-+ if (_hc->do_split) {
-+ hc_intr_mask.b.nak = 1;
-+ if (_hc->complete_split) {
-+ hc_intr_mask.b.nyet = 1;
-+ }
-+ else {
-+ hc_intr_mask.b.ack = 1;
-+ }
-+ }
-+
-+ if (_hc->error_state) {
-+ hc_intr_mask.b.ack = 1;
-+ }
-+ break;
-+ case DWC_OTG_EP_TYPE_INTR:
-+ hc_intr_mask.b.xfercompl = 1;
-+ hc_intr_mask.b.nak = 1;
-+ hc_intr_mask.b.stall = 1;
-+ hc_intr_mask.b.xacterr = 1;
-+ hc_intr_mask.b.datatglerr = 1;
-+ hc_intr_mask.b.frmovrun = 1;
-+
-+ if (_hc->ep_is_in) {
-+ hc_intr_mask.b.bblerr = 1;
-+ }
-+ if (_hc->error_state) {
-+ hc_intr_mask.b.ack = 1;
-+ }
-+ if (_hc->do_split) {
-+ if (_hc->complete_split) {
-+ hc_intr_mask.b.nyet = 1;
-+ }
-+ else {
-+ hc_intr_mask.b.ack = 1;
-+ }
-+ }
-+ break;
-+ case DWC_OTG_EP_TYPE_ISOC:
-+ hc_intr_mask.b.xfercompl = 1;
-+ hc_intr_mask.b.frmovrun = 1;
-+ hc_intr_mask.b.ack = 1;
-+
-+ if (_hc->ep_is_in) {
-+ hc_intr_mask.b.xacterr = 1;
-+ hc_intr_mask.b.bblerr = 1;
-+ }
-+ break;
-+ }
-+ }
-+ dwc_write_reg32(&hc_regs->hcintmsk, hc_intr_mask.d32);
-+
-+ /* Enable the top level host channel interrupt. */
-+ intr_enable = (1 << hc_num);
-+ dwc_modify_reg32(&host_if->host_global_regs->haintmsk, 0, intr_enable);
-+
-+ /* Make sure host channel interrupts are enabled. */
-+ gintmsk.b.hcintr = 1;
-+ dwc_modify_reg32(&_core_if->core_global_regs->gintmsk, 0, gintmsk.d32);
-+
-+ /*
-+ * Program the HCCHARn register with the endpoint characteristics for
-+ * the current transfer.
-+ */
-+ hcchar.d32 = 0;
-+ hcchar.b.devaddr = _hc->dev_addr;
-+ hcchar.b.epnum = _hc->ep_num;
-+ hcchar.b.epdir = _hc->ep_is_in;
-+ hcchar.b.lspddev = (_hc->speed == DWC_OTG_EP_SPEED_LOW);
-+ hcchar.b.eptype = _hc->ep_type;
-+ hcchar.b.mps = _hc->max_packet;
-+
-+ dwc_write_reg32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32);
-+
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
-+ DWC_DEBUGPL(DBG_HCDV, " Dev Addr: %d\n", hcchar.b.devaddr);
-+ DWC_DEBUGPL(DBG_HCDV, " Ep Num: %d\n", hcchar.b.epnum);
-+ DWC_DEBUGPL(DBG_HCDV, " Is In: %d\n", hcchar.b.epdir);
-+ DWC_DEBUGPL(DBG_HCDV, " Is Low Speed: %d\n", hcchar.b.lspddev);
-+ DWC_DEBUGPL(DBG_HCDV, " Ep Type: %d\n", hcchar.b.eptype);
-+ DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps);
-+ DWC_DEBUGPL(DBG_HCDV, " Multi Cnt: %d\n", hcchar.b.multicnt);
-+
-+ /*
-+ * Program the HCSPLIT register for SPLITs
-+ */
-+ hcsplt.d32 = 0;
-+ if (_hc->do_split) {
-+ DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", _hc->hc_num,
-+ _hc->complete_split ? "CSPLIT" : "SSPLIT");
-+ hcsplt.b.compsplt = _hc->complete_split;
-+ hcsplt.b.xactpos = _hc->xact_pos;
-+ hcsplt.b.hubaddr = _hc->hub_addr;
-+ hcsplt.b.prtaddr = _hc->port_addr;
-+ DWC_DEBUGPL(DBG_HCDV, " comp split %d\n", _hc->complete_split);
-+ DWC_DEBUGPL(DBG_HCDV, " xact pos %d\n", _hc->xact_pos);
-+ DWC_DEBUGPL(DBG_HCDV, " hub addr %d\n", _hc->hub_addr);
-+ DWC_DEBUGPL(DBG_HCDV, " port addr %d\n", _hc->port_addr);
-+ DWC_DEBUGPL(DBG_HCDV, " is_in %d\n", _hc->ep_is_in);
-+ DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps);
-+ DWC_DEBUGPL(DBG_HCDV, " xferlen: %d\n", _hc->xfer_len);
-+ }
-+ dwc_write_reg32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32);
-+
-+}
-+
-+/**
-+ * Attempts to halt a host channel. This function should only be called in
-+ * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under
-+ * normal circumstances in DMA mode, the controller halts the channel when the
-+ * transfer is complete or a condition occurs that requires application
-+ * intervention.
-+ *
-+ * In slave mode, checks for a free request queue entry, then sets the Channel
-+ * Enable and Channel Disable bits of the Host Channel Characteristics
-+ * register of the specified channel to intiate the halt. If there is no free
-+ * request queue entry, sets only the Channel Disable bit of the HCCHARn
-+ * register to flush requests for this channel. In the latter case, sets a
-+ * flag to indicate that the host channel needs to be halted when a request
-+ * queue slot is open.
-+ *
-+ * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
-+ * HCCHARn register. The controller ensures there is space in the request
-+ * queue before submitting the halt request.
-+ *
-+ * Some time may elapse before the core flushes any posted requests for this
-+ * host channel and halts. The Channel Halted interrupt handler completes the
-+ * deactivation of the host channel.
-+ *
-+ * @param _core_if Controller register interface.
-+ * @param _hc Host channel to halt.
-+ * @param _halt_status Reason for halting the channel.
-+ */
-+void dwc_otg_hc_halt(dwc_otg_core_if_t *_core_if,
-+ dwc_hc_t *_hc,
-+ dwc_otg_halt_status_e _halt_status)
-+{
-+ gnptxsts_data_t nptxsts;
-+ hptxsts_data_t hptxsts;
-+ hcchar_data_t hcchar;
-+ dwc_otg_hc_regs_t *hc_regs;
-+ dwc_otg_core_global_regs_t *global_regs;
-+ dwc_otg_host_global_regs_t *host_global_regs;
-+
-+ hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
-+ global_regs = _core_if->core_global_regs;
-+ host_global_regs = _core_if->host_if->host_global_regs;
-+
-+ WARN_ON(_halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS);
-+
-+ if (_halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
-+ _halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
-+ /*
-+ * Disable all channel interrupts except Ch Halted. The QTD
-+ * and QH state associated with this transfer has been cleared
-+ * (in the case of URB_DEQUEUE), so the channel needs to be
-+ * shut down carefully to prevent crashes.
-+ */
-+ hcintmsk_data_t hcintmsk;
-+ hcintmsk.d32 = 0;
-+ hcintmsk.b.chhltd = 1;
-+ dwc_write_reg32(&hc_regs->hcintmsk, hcintmsk.d32);
-+
-+ /*
-+ * Make sure no other interrupts besides halt are currently
-+ * pending. Handling another interrupt could cause a crash due
-+ * to the QTD and QH state.
-+ */
-+ dwc_write_reg32(&hc_regs->hcint, ~hcintmsk.d32);
-+
-+ /*
-+ * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
-+ * even if the channel was already halted for some other
-+ * reason.
-+ */
-+ _hc->halt_status = _halt_status;
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (hcchar.b.chen == 0) {
-+ /*
-+ * The channel is either already halted or it hasn't
-+ * started yet. In DMA mode, the transfer may halt if
-+ * it finishes normally or a condition occurs that
-+ * requires driver intervention. Don't want to halt
-+ * the channel again. In either Slave or DMA mode,
-+ * it's possible that the transfer has been assigned
-+ * to a channel, but not started yet when an URB is
-+ * dequeued. Don't want to halt a channel that hasn't
-+ * started yet.
-+ */
-+ return;
-+ }
-+ }
-+
-+ if (_hc->halt_pending) {
-+ /*
-+ * A halt has already been issued for this channel. This might
-+ * happen when a transfer is aborted by a higher level in
-+ * the stack.
-+ */
-+#ifdef DEBUG
-+ DWC_PRINT("*** %s: Channel %d, _hc->halt_pending already set ***\n",
-+ __func__, _hc->hc_num);
-+
-+/* dwc_otg_dump_global_registers(_core_if); */
-+/* dwc_otg_dump_host_registers(_core_if); */
-+#endif
-+ return;
-+ }
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcchar.b.chen = 1;
-+ hcchar.b.chdis = 1;
-+
-+ if (!_core_if->dma_enable) {
-+ /* Check for space in the request queue to issue the halt. */
-+ if (_hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
-+ _hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
-+ nptxsts.d32 = dwc_read_reg32(&global_regs->gnptxsts);
-+ if (nptxsts.b.nptxqspcavail == 0) {
-+ hcchar.b.chen = 0;
-+ }
-+ } else {
-+ hptxsts.d32 = dwc_read_reg32(&host_global_regs->hptxsts);
-+ if ((hptxsts.b.ptxqspcavail == 0) || (_core_if->queuing_high_bandwidth)) {
-+ hcchar.b.chen = 0;
-+ }
-+ }
-+ }
-+
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+
-+ _hc->halt_status = _halt_status;
-+
-+ if (hcchar.b.chen) {
-+ _hc->halt_pending = 1;
-+ _hc->halt_on_queue = 0;
-+ } else {
-+ _hc->halt_on_queue = 1;
-+ }
-+
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
-+ DWC_DEBUGPL(DBG_HCDV, " hcchar: 0x%08x\n", hcchar.d32);
-+ DWC_DEBUGPL(DBG_HCDV, " halt_pending: %d\n", _hc->halt_pending);
-+ DWC_DEBUGPL(DBG_HCDV, " halt_on_queue: %d\n", _hc->halt_on_queue);
-+ DWC_DEBUGPL(DBG_HCDV, " halt_status: %d\n", _hc->halt_status);
-+
-+ return;
-+}
-+
-+/**
-+ * Clears the transfer state for a host channel. This function is normally
-+ * called after a transfer is done and the host channel is being released.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ * @param _hc Identifies the host channel to clean up.
-+ */
-+void dwc_otg_hc_cleanup(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
-+{
-+ dwc_otg_hc_regs_t *hc_regs;
-+
-+ _hc->xfer_started = 0;
-+
-+ /*
-+ * Clear channel interrupt enables and any unhandled channel interrupt
-+ * conditions.
-+ */
-+ hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
-+ dwc_write_reg32(&hc_regs->hcintmsk, 0);
-+ dwc_write_reg32(&hc_regs->hcint, 0xFFFFFFFF);
-+
-+#ifdef DEBUG
-+ del_timer(&_core_if->hc_xfer_timer[_hc->hc_num]);
-+ {
-+ hcchar_data_t hcchar;
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (hcchar.b.chdis) {
-+ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
-+ __func__, _hc->hc_num, hcchar.d32);
-+ }
-+ }
-+#endif
-+}
-+
-+/**
-+ * Sets the channel property that indicates in which frame a periodic transfer
-+ * should occur. This is always set to the _next_ frame. This function has no
-+ * effect on non-periodic transfers.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ * @param _hc Identifies the host channel to set up and its properties.
-+ * @param _hcchar Current value of the HCCHAR register for the specified host
-+ * channel.
-+ */
-+static inline void hc_set_even_odd_frame(dwc_otg_core_if_t *_core_if,
-+ dwc_hc_t *_hc,
-+ hcchar_data_t *_hcchar)
-+{
-+ if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ hfnum_data_t hfnum;
-+ hfnum.d32 = dwc_read_reg32(&_core_if->host_if->host_global_regs->hfnum);
-+ /* 1 if _next_ frame is odd, 0 if it's even */
-+ _hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
-+#ifdef DEBUG
-+ if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR && _hc->do_split && !_hc->complete_split) {
-+ switch (hfnum.b.frnum & 0x7) {
-+ case 7:
-+ _core_if->hfnum_7_samples++;
-+ _core_if->hfnum_7_frrem_accum += hfnum.b.frrem;
-+ break;
-+ case 0:
-+ _core_if->hfnum_0_samples++;
-+ _core_if->hfnum_0_frrem_accum += hfnum.b.frrem;
-+ break;
-+ default:
-+ _core_if->hfnum_other_samples++;
-+ _core_if->hfnum_other_frrem_accum += hfnum.b.frrem;
-+ break;
-+ }
-+ }
-+#endif
-+ }
-+}
-+
-+#ifdef DEBUG
-+static void hc_xfer_timeout(unsigned long _ptr)
-+{
-+ hc_xfer_info_t *xfer_info = (hc_xfer_info_t *)_ptr;
-+ int hc_num = xfer_info->hc->hc_num;
-+ DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num);
-+ DWC_WARN(" start_hcchar_val 0x%08x\n", xfer_info->core_if->start_hcchar_val[hc_num]);
-+}
-+#endif
-+
-+/*
-+ * This function does the setup for a data transfer for a host channel and
-+ * starts the transfer. May be called in either Slave mode or DMA mode. In
-+ * Slave mode, the caller must ensure that there is sufficient space in the
-+ * request queue and Tx Data FIFO.
-+ *
-+ * For an OUT transfer in Slave mode, it loads a data packet into the
-+ * appropriate FIFO. If necessary, additional data packets will be loaded in
-+ * the Host ISR.
-+ *
-+ * For an IN transfer in Slave mode, a data packet is requested. The data
-+ * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
-+ * additional data packets are requested in the Host ISR.
-+ *
-+ * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
-+ * register along with a packet count of 1 and the channel is enabled. This
-+ * causes a single PING transaction to occur. Other fields in HCTSIZ are
-+ * simply set to 0 since no data transfer occurs in this case.
-+ *
-+ * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
-+ * all the information required to perform the subsequent data transfer. In
-+ * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
-+ * controller performs the entire PING protocol, then starts the data
-+ * transfer.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ * @param _hc Information needed to initialize the host channel. The xfer_len
-+ * value may be reduced to accommodate the max widths of the XferSize and
-+ * PktCnt fields in the HCTSIZn register. The multi_count value may be changed
-+ * to reflect the final xfer_len value.
-+ */
-+void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
-+{
-+ hcchar_data_t hcchar;
-+ hctsiz_data_t hctsiz;
-+ uint16_t num_packets;
-+ uint32_t max_hc_xfer_size = _core_if->core_params->max_transfer_size;
-+ uint16_t max_hc_pkt_count = _core_if->core_params->max_packet_count;
-+ dwc_otg_hc_regs_t *hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
-+
-+ hctsiz.d32 = 0;
-+
-+ if (_hc->do_ping) {
-+ if (!_core_if->dma_enable) {
-+ dwc_otg_hc_do_ping(_core_if, _hc);
-+ _hc->xfer_started = 1;
-+ return;
-+ } else {
-+ hctsiz.b.dopng = 1;
-+ }
-+ }
-+
-+ if (_hc->do_split) {
-+ num_packets = 1;
-+
-+ if (_hc->complete_split && !_hc->ep_is_in) {
-+ /* For CSPLIT OUT Transfer, set the size to 0 so the
-+ * core doesn't expect any data written to the FIFO */
-+ _hc->xfer_len = 0;
-+ } else if (_hc->ep_is_in || (_hc->xfer_len > _hc->max_packet)) {
-+ _hc->xfer_len = _hc->max_packet;
-+ } else if (!_hc->ep_is_in && (_hc->xfer_len > 188)) {
-+ _hc->xfer_len = 188;
-+ }
-+
-+ hctsiz.b.xfersize = _hc->xfer_len;
-+ } else {
-+ /*
-+ * Ensure that the transfer length and packet count will fit
-+ * in the widths allocated for them in the HCTSIZn register.
-+ */
-+ if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ /*
-+ * Make sure the transfer size is no larger than one
-+ * (micro)frame's worth of data. (A check was done
-+ * when the periodic transfer was accepted to ensure
-+ * that a (micro)frame's worth of data can be
-+ * programmed into a channel.)
-+ */
-+ uint32_t max_periodic_len = _hc->multi_count * _hc->max_packet;
-+ if (_hc->xfer_len > max_periodic_len) {
-+ _hc->xfer_len = max_periodic_len;
-+ } else {
-+ }
-+ } else if (_hc->xfer_len > max_hc_xfer_size) {
-+ /* Make sure that xfer_len is a multiple of max packet size. */
-+ _hc->xfer_len = max_hc_xfer_size - _hc->max_packet + 1;
-+ }
-+
-+ if (_hc->xfer_len > 0) {
-+ num_packets = (_hc->xfer_len + _hc->max_packet - 1) / _hc->max_packet;
-+ if (num_packets > max_hc_pkt_count) {
-+ num_packets = max_hc_pkt_count;
-+ _hc->xfer_len = num_packets * _hc->max_packet;
-+ }
-+ } else {
-+ /* Need 1 packet for transfer length of 0. */
-+ num_packets = 1;
-+ }
-+
-+ if (_hc->ep_is_in) {
-+ /* Always program an integral # of max packets for IN transfers. */
-+ _hc->xfer_len = num_packets * _hc->max_packet;
-+ }
-+
-+ if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ /*
-+ * Make sure that the multi_count field matches the
-+ * actual transfer length.
-+ */
-+ _hc->multi_count = num_packets;
-+
-+ }
-+
-+ if (_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ /* Set up the initial PID for the transfer. */
-+ if (_hc->speed == DWC_OTG_EP_SPEED_HIGH) {
-+ if (_hc->ep_is_in) {
-+ if (_hc->multi_count == 1) {
-+ _hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
-+ } else if (_hc->multi_count == 2) {
-+ _hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
-+ } else {
-+ _hc->data_pid_start = DWC_OTG_HC_PID_DATA2;
-+ }
-+ } else {
-+ if (_hc->multi_count == 1) {
-+ _hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
-+ } else {
-+ _hc->data_pid_start = DWC_OTG_HC_PID_MDATA;
-+ }
-+ }
-+ } else {
-+ _hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
-+ }
-+ }
-+
-+ hctsiz.b.xfersize = _hc->xfer_len;
-+ }
-+
-+ _hc->start_pkt_count = num_packets;
-+ hctsiz.b.pktcnt = num_packets;
-+ hctsiz.b.pid = _hc->data_pid_start;
-+ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
-+ DWC_DEBUGPL(DBG_HCDV, " Xfer Size: %d\n", hctsiz.b.xfersize);
-+ DWC_DEBUGPL(DBG_HCDV, " Num Pkts: %d\n", hctsiz.b.pktcnt);
-+ DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid);
-+
-+ if (_core_if->dma_enable) {
-+#ifdef DEBUG
-+if(((uint32_t)_hc->xfer_buff)%4)
-+printk("dwc_otg_hc_start_transfer _hc->xfer_buff not 4 byte alignment\n");
-+#endif
-+ dwc_write_reg32(&hc_regs->hcdma, (uint32_t)_hc->xfer_buff);
-+ }
-+
-+ /* Start the split */
-+ if (_hc->do_split) {
-+ hcsplt_data_t hcsplt;
-+ hcsplt.d32 = dwc_read_reg32 (&hc_regs->hcsplt);
-+ hcsplt.b.spltena = 1;
-+ dwc_write_reg32(&hc_regs->hcsplt, hcsplt.d32);
-+ }
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcchar.b.multicnt = _hc->multi_count;
-+ hc_set_even_odd_frame(_core_if, _hc, &hcchar);
-+#ifdef DEBUG
-+ _core_if->start_hcchar_val[_hc->hc_num] = hcchar.d32;
-+ if (hcchar.b.chdis) {
-+ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
-+ __func__, _hc->hc_num, hcchar.d32);
-+ }
-+#endif
-+
-+ /* Set host channel enable after all other setup is complete. */
-+ hcchar.b.chen = 1;
-+ hcchar.b.chdis = 0;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+
-+ _hc->xfer_started = 1;
-+ _hc->requests++;
-+
-+ if (!_core_if->dma_enable && !_hc->ep_is_in && _hc->xfer_len > 0) {
-+ /* Load OUT packet into the appropriate Tx FIFO. */
-+ dwc_otg_hc_write_packet(_core_if, _hc);
-+ }
-+
-+#ifdef DEBUG
-+ /* Start a timer for this transfer. */
-+ _core_if->hc_xfer_timer[_hc->hc_num].function = hc_xfer_timeout;
-+ _core_if->hc_xfer_info[_hc->hc_num].core_if = _core_if;
-+ _core_if->hc_xfer_info[_hc->hc_num].hc = _hc;
-+ _core_if->hc_xfer_timer[_hc->hc_num].data = (unsigned long)(&_core_if->hc_xfer_info[_hc->hc_num]);
-+ _core_if->hc_xfer_timer[_hc->hc_num].expires = jiffies + (HZ*10);
-+ add_timer(&_core_if->hc_xfer_timer[_hc->hc_num]);
-+#endif
-+}
-+
-+/**
-+ * This function continues a data transfer that was started by previous call
-+ * to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is
-+ * sufficient space in the request queue and Tx Data FIFO. This function
-+ * should only be called in Slave mode. In DMA mode, the controller acts
-+ * autonomously to complete transfers programmed to a host channel.
-+ *
-+ * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
-+ * if there is any data remaining to be queued. For an IN transfer, another
-+ * data packet is always requested. For the SETUP phase of a control transfer,
-+ * this function does nothing.
-+ *
-+ * @return 1 if a new request is queued, 0 if no more requests are required
-+ * for this transfer.
-+ */
-+int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
-+{
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
-+
-+ if (_hc->do_split) {
-+ /* SPLITs always queue just once per channel */
-+ return 0;
-+ } else if (_hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
-+ /* SETUPs are queued only once since they can't be NAKed. */
-+ return 0;
-+ } else if (_hc->ep_is_in) {
-+ /*
-+ * Always queue another request for other IN transfers. If
-+ * back-to-back INs are issued and NAKs are received for both,
-+ * the driver may still be processing the first NAK when the
-+ * second NAK is received. When the interrupt handler clears
-+ * the NAK interrupt for the first NAK, the second NAK will
-+ * not be seen. So we can't depend on the NAK interrupt
-+ * handler to requeue a NAKed request. Instead, IN requests
-+ * are issued each time this function is called. When the
-+ * transfer completes, the extra requests for the channel will
-+ * be flushed.
-+ */
-+ hcchar_data_t hcchar;
-+ dwc_otg_hc_regs_t *hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hc_set_even_odd_frame(_core_if, _hc, &hcchar);
-+ hcchar.b.chen = 1;
-+ hcchar.b.chdis = 0;
-+ DWC_DEBUGPL(DBG_HCDV, " IN xfer: hcchar = 0x%08x\n", hcchar.d32);
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+ _hc->requests++;
-+ return 1;
-+ } else {
-+ /* OUT transfers. */
-+ if (_hc->xfer_count < _hc->xfer_len) {
-+ if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ hcchar_data_t hcchar;
-+ dwc_otg_hc_regs_t *hc_regs;
-+ hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hc_set_even_odd_frame(_core_if, _hc, &hcchar);
-+ }
-+
-+ /* Load OUT packet into the appropriate Tx FIFO. */
-+ dwc_otg_hc_write_packet(_core_if, _hc);
-+ _hc->requests++;
-+ return 1;
-+ } else {
-+ return 0;
-+ }
-+ }
-+}
-+
-+/**
-+ * Starts a PING transfer. This function should only be called in Slave mode.
-+ * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled.
-+ */
-+void dwc_otg_hc_do_ping(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
-+{
-+ hcchar_data_t hcchar;
-+ hctsiz_data_t hctsiz;
-+ dwc_otg_hc_regs_t *hc_regs = _core_if->host_if->hc_regs[_hc->hc_num];
-+
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _hc->hc_num);
-+
-+ hctsiz.d32 = 0;
-+ hctsiz.b.dopng = 1;
-+ hctsiz.b.pktcnt = 1;
-+ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcchar.b.chen = 1;
-+ hcchar.b.chdis = 0;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+}
-+
-+/*
-+ * This function writes a packet into the Tx FIFO associated with the Host
-+ * Channel. For a channel associated with a non-periodic EP, the non-periodic
-+ * Tx FIFO is written. For a channel associated with a periodic EP, the
-+ * periodic Tx FIFO is written. This function should only be called in Slave
-+ * mode.
-+ *
-+ * Upon return the xfer_buff and xfer_count fields in _hc are incremented by
-+ * then number of bytes written to the Tx FIFO.
-+ */
-+void dwc_otg_hc_write_packet(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
-+{
-+ uint32_t i;
-+ uint32_t remaining_count;
-+ uint32_t byte_count;
-+ uint32_t dword_count;
-+
-+ uint32_t *data_buff = (uint32_t *)(_hc->xfer_buff);
-+ uint32_t *data_fifo = _core_if->data_fifo[_hc->hc_num];
-+
-+ remaining_count = _hc->xfer_len - _hc->xfer_count;
-+ if (remaining_count > _hc->max_packet) {
-+ byte_count = _hc->max_packet;
-+ } else {
-+ byte_count = remaining_count;
-+ }
-+
-+ dword_count = (byte_count + 3) / 4;
-+
-+ if ((((unsigned long)data_buff) & 0x3) == 0) {
-+ /* xfer_buff is DWORD aligned. */
-+ for (i = 0; i < dword_count; i++, data_buff++) {
-+ dwc_write_reg32(data_fifo, *data_buff);
-+ }
-+ } else {
-+ /* xfer_buff is not DWORD aligned. */
-+ for (i = 0; i < dword_count; i++, data_buff++) {
-+ dwc_write_reg32(data_fifo, get_unaligned(data_buff));
-+ }
-+ }
-+
-+ _hc->xfer_count += byte_count;
-+ _hc->xfer_buff += byte_count;
-+}
-+
-+/**
-+ * Gets the current USB frame number. This is the frame number from the last
-+ * SOF packet.
-+ */
-+uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *_core_if)
-+{
-+ dsts_data_t dsts;
-+ dsts.d32 = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->dsts);
-+
-+ /* read current frame/microfreme number from DSTS register */
-+ return dsts.b.soffn;
-+}
-+
-+/**
-+ * This function reads a setup packet from the Rx FIFO into the destination
-+ * buffer. This function is called from the Rx Status Queue Level (RxStsQLvl)
-+ * Interrupt routine when a SETUP packet has been received in Slave mode.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ * @param _dest Destination buffer for packet data.
-+ */
-+void dwc_otg_read_setup_packet(dwc_otg_core_if_t *_core_if, uint32_t *_dest)
-+{
-+ /* Get the 8 bytes of a setup transaction data */
-+
-+ /* Pop 2 DWORDS off the receive data FIFO into memory */
-+ _dest[0] = dwc_read_reg32(_core_if->data_fifo[0]);
-+ _dest[1] = dwc_read_reg32(_core_if->data_fifo[0]);
-+ //_dest[0] = dwc_read_datafifo32(_core_if->data_fifo[0]);
-+ //_dest[1] = dwc_read_datafifo32(_core_if->data_fifo[0]);
-+}
-+
-+
-+/**
-+ * This function enables EP0 OUT to receive SETUP packets and configures EP0
-+ * IN for transmitting packets. It is normally called when the
-+ * "Enumeration Done" interrupt occurs.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ * @param _ep The EP0 data.
-+ */
-+void dwc_otg_ep0_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
-+{
-+ dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
-+ dsts_data_t dsts;
-+ depctl_data_t diepctl;
-+ depctl_data_t doepctl;
-+ dctl_data_t dctl ={.d32=0};
-+
-+ /* Read the Device Status and Endpoint 0 Control registers */
-+ dsts.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dsts);
-+ diepctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl);
-+ doepctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl);
-+
-+ /* Set the MPS of the IN EP based on the enumeration speed */
-+ switch (dsts.b.enumspd) {
-+ case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
-+ case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
-+ case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
-+ diepctl.b.mps = DWC_DEP0CTL_MPS_64;
-+ break;
-+ case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
-+ diepctl.b.mps = DWC_DEP0CTL_MPS_8;
-+ break;
-+ }
-+
-+ dwc_write_reg32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
-+
-+ /* Enable OUT EP for receive */
-+ doepctl.b.epena = 1;
-+ dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
-+
-+#ifdef VERBOSE
-+ DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n",
-+ dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
-+ DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n",
-+ dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl));
-+#endif
-+ dctl.b.cgnpinnak = 1;
-+ dwc_modify_reg32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
-+ DWC_DEBUGPL(DBG_PCDV,"dctl=%0x\n",
-+ dwc_read_reg32(&dev_if->dev_global_regs->dctl));
-+}
-+
-+/**
-+ * This function activates an EP. The Device EP control register for
-+ * the EP is configured as defined in the ep structure. Note: This
-+ * function is not used for EP0.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ * @param _ep The EP to activate.
-+ */
-+void dwc_otg_ep_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
-+{
-+ dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
-+ depctl_data_t depctl;
-+ volatile uint32_t *addr;
-+ daint_data_t daintmsk = {.d32=0};
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, _ep->num,
-+ (_ep->is_in?"IN":"OUT"));
-+
-+ /* Read DEPCTLn register */
-+ if (_ep->is_in == 1) {
-+ addr = &dev_if->in_ep_regs[_ep->num]->diepctl;
-+ daintmsk.ep.in = 1<<_ep->num;
-+ } else {
-+ addr = &dev_if->out_ep_regs[_ep->num]->doepctl;
-+ daintmsk.ep.out = 1<<_ep->num;
-+ }
-+
-+ /* If the EP is already active don't change the EP Control
-+ * register. */
-+ depctl.d32 = dwc_read_reg32(addr);
-+ if (!depctl.b.usbactep) {
-+ depctl.b.mps = _ep->maxpacket;
-+ depctl.b.eptype = _ep->type;
-+ depctl.b.txfnum = _ep->tx_fifo_num;
-+
-+ if (_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ depctl.b.setd0pid = 1; // ???
-+ } else {
-+ depctl.b.setd0pid = 1;
-+ }
-+ depctl.b.usbactep = 1;
-+
-+ dwc_write_reg32(addr, depctl.d32);
-+ DWC_DEBUGPL(DBG_PCDV,"DEPCTL=%08x\n", dwc_read_reg32(addr));
-+ }
-+
-+
-+ /* Enable the Interrupt for this EP */
-+ dwc_modify_reg32(&dev_if->dev_global_regs->daintmsk,
-+ 0, daintmsk.d32);
-+ DWC_DEBUGPL(DBG_PCDV,"DAINTMSK=%0x\n",
-+ dwc_read_reg32(&dev_if->dev_global_regs->daintmsk));
-+ _ep->stall_clear_flag = 0;
-+ return;
-+}
-+
-+/**
-+ * This function deactivates an EP. This is done by clearing the USB Active
-+ * EP bit in the Device EP control register. Note: This function is not used
-+ * for EP0. EP0 cannot be deactivated.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ * @param _ep The EP to deactivate.
-+ */
-+void dwc_otg_ep_deactivate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
-+{
-+ depctl_data_t depctl ={.d32 = 0};
-+ volatile uint32_t *addr;
-+ daint_data_t daintmsk = {.d32=0};
-+
-+ /* Read DEPCTLn register */
-+ if (_ep->is_in == 1) {
-+ addr = &_core_if->dev_if->in_ep_regs[_ep->num]->diepctl;
-+ daintmsk.ep.in = 1<<_ep->num;
-+ } else {
-+ addr = &_core_if->dev_if->out_ep_regs[_ep->num]->doepctl;
-+ daintmsk.ep.out = 1<<_ep->num;
-+ }
-+
-+ depctl.b.usbactep = 0;
-+ dwc_write_reg32(addr, depctl.d32);
-+
-+ /* Disable the Interrupt for this EP */
-+ dwc_modify_reg32(&_core_if->dev_if->dev_global_regs->daintmsk,
-+ daintmsk.d32, 0);
-+
-+ return;
-+}
-+
-+/**
-+ * This function does the setup for a data transfer for an EP and
-+ * starts the transfer. For an IN transfer, the packets will be
-+ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
-+ * the packets are unloaded from the Rx FIFO in the ISR. the ISR.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ * @param _ep The EP to start the transfer on.
-+ */
-+void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
-+{
-+ /** @todo Refactor this funciton to check the transfer size
-+ * count value does not execed the number bits in the Transfer
-+ * count register. */
-+ depctl_data_t depctl;
-+ deptsiz_data_t deptsiz;
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+
-+#ifdef CHECK_PACKET_COUNTER_WIDTH
-+ const uint32_t MAX_XFER_SIZE =
-+ _core_if->core_params->max_transfer_size;
-+ const uint32_t MAX_PKT_COUNT =
-+ _core_if->core_params->max_packet_count;
-+ uint32_t num_packets;
-+ uint32_t transfer_len;
-+ dwc_otg_dev_out_ep_regs_t *out_regs =
-+ _core_if->dev_if->out_ep_regs[_ep->num];
-+ dwc_otg_dev_in_ep_regs_t *in_regs =
-+ _core_if->dev_if->in_ep_regs[_ep->num];
-+ gnptxsts_data_t txstatus;
-+
-+ int lvl = SET_DEBUG_LEVEL(DBG_PCD);
-+
-+
-+ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
-+ "xfer_buff=%p start_xfer_buff=%p\n",
-+ _ep->num, (_ep->is_in?"IN":"OUT"), _ep->xfer_len,
-+ _ep->xfer_count, _ep->xfer_buff, _ep->start_xfer_buff);
-+
-+ transfer_len = _ep->xfer_len - _ep->xfer_count;
-+ if (transfer_len > MAX_XFER_SIZE) {
-+ transfer_len = MAX_XFER_SIZE;
-+ }
-+ if (transfer_len == 0) {
-+ num_packets = 1;
-+ /* OUT EP to recieve Zero-length packet set transfer
-+ * size to maxpacket size. */
-+ if (!_ep->is_in) {
-+ transfer_len = _ep->maxpacket;
-+ }
-+ } else {
-+ num_packets =
-+ (transfer_len + _ep->maxpacket - 1) / _ep->maxpacket;
-+ if (num_packets > MAX_PKT_COUNT) {
-+ num_packets = MAX_PKT_COUNT;
-+ }
-+ }
-+ DWC_DEBUGPL(DBG_PCD, "transfer_len=%d #pckt=%d\n", transfer_len,
-+ num_packets);
-+
-+ deptsiz.b.xfersize = transfer_len;
-+ deptsiz.b.pktcnt = num_packets;
-+
-+ /* IN endpoint */
-+ if (_ep->is_in == 1) {
-+ depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
-+ } else {/* OUT endpoint */
-+ depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
-+ }
-+
-+ /* EP enable, IN data in FIFO */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+ /* IN endpoint */
-+ if (_ep->is_in == 1) {
-+ txstatus.d32 =
-+ dwc_read_reg32(&_core_if->core_global_regs->gnptxsts);
-+ if (txstatus.b.nptxqspcavail == 0) {
-+ DWC_DEBUGPL(DBG_ANY, "TX Queue Full (0x%0x)\n",
-+ txstatus.d32);
-+ return;
-+ }
-+ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-+ dwc_write_reg32(&in_regs->diepctl, depctl.d32);
-+ /**
-+ * Enable the Non-Periodic Tx FIFO empty interrupt, the
-+ * data will be written into the fifo by the ISR.
-+ */
-+ if (_core_if->dma_enable) {
-+ dwc_write_reg32(&in_regs->diepdma, (uint32_t) _ep->xfer_buff);
-+ } else {
-+ if (_core_if->en_multiple_tx_fifo == 0) {
-+ intr_mask.b.nptxfempty = 1;
-+ dwc_modify_reg32( &_core_if->core_global_regs->gintsts,
-+ intr_mask.d32, 0);
-+ dwc_modify_reg32( &_core_if->core_global_regs->gintmsk,
-+ intr_mask.d32, intr_mask.d32);
-+ } else {
-+ /* Enable the Tx FIFO Empty Interrupt for this EP */
-+ if (_ep->xfer_len > 0 &&
-+ _ep->type != DWC_OTG_EP_TYPE_ISOC) {
-+ uint32_t fifoemptymsk = 0;
-+ fifoemptymsk = (0x1 << _ep->num);
-+ dwc_modify_reg32(&_core_if->dev_if->dev_global_regs->
-+ dtknqr4_fifoemptymsk,0, fifoemptymsk);
-+ }
-+ }
-+ }
-+ } else { /* OUT endpoint */
-+ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-+ dwc_write_reg32(&out_regs->doepctl, depctl.d32);
-+ if (_core_if->dma_enable) {
-+ dwc_write_reg32(&out_regs->doepdma,(uint32_t) _ep->xfer_buff);
-+ }
-+ }
-+ DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n",
-+ dwc_read_reg32(&out_regs->doepctl),
-+ dwc_read_reg32(&out_regs->doeptsiz));
-+ DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
-+ dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk),
-+ dwc_read_reg32(&_core_if->core_global_regs->gintmsk));
-+
-+ SET_DEBUG_LEVEL(lvl);
-+#endif
-+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
-+
-+ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
-+ "xfer_buff=%p start_xfer_buff=%p\n",
-+ _ep->num, (_ep->is_in?"IN":"OUT"), _ep->xfer_len,
-+ _ep->xfer_count, _ep->xfer_buff, _ep->start_xfer_buff);
-+
-+ /* IN endpoint */
-+ if (_ep->is_in == 1) {
-+ dwc_otg_dev_in_ep_regs_t * in_regs = _core_if->dev_if->in_ep_regs[_ep->num];
-+ gnptxsts_data_t gtxstatus;
-+ gtxstatus.d32 = dwc_read_reg32(&_core_if->core_global_regs->gnptxsts);
-+ if (_core_if->en_multiple_tx_fifo == 0 &&
-+ gtxstatus.b.nptxqspcavail == 0) {
-+#ifdef DEBUG
-+ DWC_PRINT("TX Queue Full (0x%0x)\n", gtxstatus.d32);
-+#endif
-+ //return;
-+ MDELAY(100); //james
-+ }
-+
-+ depctl.d32 = dwc_read_reg32(&(in_regs->diepctl));
-+ deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz));
-+
-+ /* Zero Length Packet? */
-+ if (_ep->xfer_len == 0) {
-+ deptsiz.b.xfersize = 0;
-+ deptsiz.b.pktcnt = 1;
-+ } else {
-+
-+ /* Program the transfer size and packet count
-+ * as follows: xfersize = N * maxpacket +
-+ * short_packet pktcnt = N + (short_packet
-+ * exist ? 1 : 0)
-+ */
-+ deptsiz.b.xfersize = _ep->xfer_len;
-+ deptsiz.b.pktcnt = (_ep->xfer_len - 1 + _ep->maxpacket) / _ep->maxpacket;
-+ }
-+
-+ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-+
-+ /* Write the DMA register */
-+ if (_core_if->dma_enable) {
-+#if 1 // winder
-+ dma_cache_wback_inv((unsigned long) _ep->xfer_buff, _ep->xfer_len); // winder
-+ dwc_write_reg32 (&(in_regs->diepdma),
-+ CPHYSADDR((uint32_t)_ep->xfer_buff)); // winder
-+#else
-+ dwc_write_reg32 (&(in_regs->diepdma),
-+ (uint32_t)_ep->dma_addr);
-+#endif
-+ } else {
-+ if (_ep->type != DWC_OTG_EP_TYPE_ISOC) {
-+ /**
-+ * Enable the Non-Periodic Tx FIFO empty interrupt,
-+ * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
-+ * the data will be written into the fifo by the ISR.
-+ */
-+ if (_core_if->en_multiple_tx_fifo == 0) {
-+ intr_mask.b.nptxfempty = 1;
-+ dwc_modify_reg32( &_core_if->core_global_regs->gintsts,
-+ intr_mask.d32, 0);
-+ dwc_modify_reg32( &_core_if->core_global_regs->gintmsk,
-+ intr_mask.d32, intr_mask.d32);
-+ } else {
-+ /* Enable the Tx FIFO Empty Interrupt for this EP */
-+ if (_ep->xfer_len > 0) {
-+ uint32_t fifoemptymsk = 0;
-+ fifoemptymsk = 1 << _ep->num;
-+ dwc_modify_reg32(&_core_if->dev_if->dev_global_regs->
-+ dtknqr4_fifoemptymsk,0,fifoemptymsk);
-+ }
-+ }
-+ }
-+ }
-+
-+ /* EP enable, IN data in FIFO */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+ dwc_write_reg32(&in_regs->diepctl, depctl.d32);
-+
-+ if (_core_if->dma_enable) {
-+ depctl.d32 = dwc_read_reg32 (&_core_if->dev_if->in_ep_regs[0]->diepctl);
-+ depctl.b.nextep = _ep->num;
-+ dwc_write_reg32 (&_core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32);
-+
-+ }
-+ } else {
-+ /* OUT endpoint */
-+ dwc_otg_dev_out_ep_regs_t * out_regs = _core_if->dev_if->out_ep_regs[_ep->num];
-+
-+ depctl.d32 = dwc_read_reg32(&(out_regs->doepctl));
-+ deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz));
-+
-+ /* Program the transfer size and packet count as follows:
-+ *
-+ * pktcnt = N
-+ * xfersize = N * maxpacket
-+ */
-+ if (_ep->xfer_len == 0) {
-+ /* Zero Length Packet */
-+ deptsiz.b.xfersize = _ep->maxpacket;
-+ deptsiz.b.pktcnt = 1;
-+ } else {
-+ deptsiz.b.pktcnt = (_ep->xfer_len + (_ep->maxpacket - 1)) / _ep->maxpacket;
-+ deptsiz.b.xfersize = deptsiz.b.pktcnt * _ep->maxpacket;
-+ }
-+ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-+
-+ DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n",
-+ _ep->num, deptsiz.b.xfersize, deptsiz.b.pktcnt);
-+
-+ if (_core_if->dma_enable) {
-+#if 1 // winder
-+ dwc_write_reg32 (&(out_regs->doepdma),
-+ CPHYSADDR((uint32_t)_ep->xfer_buff)); // winder
-+#else
-+ dwc_write_reg32 (&(out_regs->doepdma),
-+ (uint32_t)_ep->dma_addr);
-+#endif
-+ }
-+
-+ if (_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ /** @todo NGS: dpid is read-only. Use setd0pid
-+ * or setd1pid. */
-+ if (_ep->even_odd_frame) {
-+ depctl.b.setd1pid = 1;
-+ } else {
-+ depctl.b.setd0pid = 1;
-+ }
-+ }
-+
-+ /* EP enable */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+
-+ dwc_write_reg32(&out_regs->doepctl, depctl.d32);
-+
-+ DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n",
-+ dwc_read_reg32(&out_regs->doepctl),
-+ dwc_read_reg32(&out_regs->doeptsiz));
-+ DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
-+ dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk),
-+ dwc_read_reg32(&_core_if->core_global_regs->gintmsk));
-+ }
-+}
-+
-+
-+/**
-+ * This function does the setup for a data transfer for EP0 and starts
-+ * the transfer. For an IN transfer, the packets will be loaded into
-+ * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are
-+ * unloaded from the Rx FIFO in the ISR.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ * @param _ep The EP0 data.
-+ */
-+void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
-+{
-+ volatile depctl_data_t depctl;
-+ volatile deptsiz0_data_t deptsiz;
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+
-+ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
-+ "xfer_buff=%p start_xfer_buff=%p total_len=%d\n",
-+ _ep->num, (_ep->is_in?"IN":"OUT"), _ep->xfer_len,
-+ _ep->xfer_count, _ep->xfer_buff, _ep->start_xfer_buff,
-+ _ep->total_len);
-+ _ep->total_len = _ep->xfer_len;
-+
-+ /* IN endpoint */
-+ if (_ep->is_in == 1) {
-+ dwc_otg_dev_in_ep_regs_t * in_regs = _core_if->dev_if->in_ep_regs[0];
-+ gnptxsts_data_t gtxstatus;
-+ gtxstatus.d32 = dwc_read_reg32(&_core_if->core_global_regs->gnptxsts);
-+ if (_core_if->en_multiple_tx_fifo == 0 &&
-+ gtxstatus.b.nptxqspcavail == 0) {
-+#ifdef DEBUG
-+ deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
-+ DWC_DEBUGPL(DBG_PCD,"DIEPCTL0=%0x\n",
-+ dwc_read_reg32(&in_regs->diepctl));
-+ DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n",
-+ deptsiz.d32, deptsiz.b.xfersize,deptsiz.b.pktcnt);
-+ DWC_PRINT("TX Queue or FIFO Full (0x%0x)\n", gtxstatus.d32);
-+#endif /* */
-+ printk("TX Queue or FIFO Full!!!!\n"); // test-only
-+ //return;
-+ MDELAY(100); //james
-+ }
-+
-+ depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
-+ deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
-+
-+ /* Zero Length Packet? */
-+ if (_ep->xfer_len == 0) {
-+ deptsiz.b.xfersize = 0;
-+ deptsiz.b.pktcnt = 1;
-+ } else {
-+ /* Program the transfer size and packet count
-+ * as follows: xfersize = N * maxpacket +
-+ * short_packet pktcnt = N + (short_packet
-+ * exist ? 1 : 0)
-+ */
-+ if (_ep->xfer_len > _ep->maxpacket) {
-+ _ep->xfer_len = _ep->maxpacket;
-+ deptsiz.b.xfersize = _ep->maxpacket;
-+ }
-+ else {
-+ deptsiz.b.xfersize = _ep->xfer_len;
-+ }
-+ deptsiz.b.pktcnt = 1;
-+
-+ }
-+ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-+ DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n",
-+ _ep->xfer_len, deptsiz.b.xfersize,deptsiz.b.pktcnt, deptsiz.d32);
-+
-+ /* Write the DMA register */
-+ if (_core_if->dma_enable) {
-+ dwc_write_reg32(&(in_regs->diepdma), (uint32_t) _ep->dma_addr);
-+ }
-+
-+ /* EP enable, IN data in FIFO */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+ dwc_write_reg32(&in_regs->diepctl, depctl.d32);
-+
-+ /**
-+ * Enable the Non-Periodic Tx FIFO empty interrupt, the
-+ * data will be written into the fifo by the ISR.
-+ */
-+ if (!_core_if->dma_enable) {
-+ if (_core_if->en_multiple_tx_fifo == 0) {
-+ intr_mask.b.nptxfempty = 1;
-+ dwc_modify_reg32(&_core_if->core_global_regs->gintsts, intr_mask.d32, 0);
-+ dwc_modify_reg32(&_core_if->core_global_regs->gintmsk, intr_mask.d32,
-+ intr_mask.d32);
-+ } else {
-+ /* Enable the Tx FIFO Empty Interrupt for this EP */
-+ if (_ep->xfer_len > 0) {
-+ uint32_t fifoemptymsk = 0;
-+ fifoemptymsk |= 1 << _ep->num;
-+ dwc_modify_reg32(&_core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
-+ 0, fifoemptymsk);
-+ }
-+
-+ }
-+ }
-+ } else {
-+ /* OUT endpoint */
-+ dwc_otg_dev_out_ep_regs_t * out_regs = _core_if->dev_if->out_ep_regs[_ep->num];
-+
-+ depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
-+ deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);
-+
-+ /* Program the transfer size and packet count as follows:
-+ * xfersize = N * (maxpacket + 4 - (maxpacket % 4))
-+ * pktcnt = N */
-+ if (_ep->xfer_len == 0) {
-+ /* Zero Length Packet */
-+ deptsiz.b.xfersize = _ep->maxpacket;
-+ deptsiz.b.pktcnt = 1;
-+ } else {
-+ deptsiz.b.pktcnt = (_ep->xfer_len + (_ep->maxpacket - 1)) / _ep->maxpacket;
-+ deptsiz.b.xfersize = deptsiz.b.pktcnt * _ep->maxpacket;
-+ }
-+
-+ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
-+ DWC_DEBUGPL(DBG_PCDV, "len=%d xfersize=%d pktcnt=%d\n",
-+ _ep->xfer_len, deptsiz.b.xfersize,deptsiz.b.pktcnt);
-+
-+ if (_core_if->dma_enable) {
-+ dwc_write_reg32(&(out_regs->doepdma), (uint32_t) _ep->dma_addr);
-+ }
-+
-+ /* EP enable */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+ dwc_write_reg32 (&(out_regs->doepctl), depctl.d32);
-+ }
-+}
-+
-+/**
-+ * This function continues control IN transfers started by
-+ * dwc_otg_ep0_start_transfer, when the transfer does not fit in a
-+ * single packet. NOTE: The DIEPCTL0/DOEPCTL0 registers only have one
-+ * bit for the packet count.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ * @param _ep The EP0 data.
-+ */
-+void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
-+{
-+ depctl_data_t depctl;
-+ deptsiz0_data_t deptsiz;
-+ gintmsk_data_t intr_mask = { .d32 = 0};
-+
-+ if (_ep->is_in == 1) {
-+ dwc_otg_dev_in_ep_regs_t *in_regs =
-+ _core_if->dev_if->in_ep_regs[0];
-+ gnptxsts_data_t tx_status = {.d32 = 0};
-+
-+ tx_status.d32 = dwc_read_reg32( &_core_if->core_global_regs->gnptxsts );
-+ /** @todo Should there be check for room in the Tx
-+ * Status Queue. If not remove the code above this comment. */
-+
-+ depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
-+ deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
-+
-+ /* Program the transfer size and packet count
-+ * as follows: xfersize = N * maxpacket +
-+ * short_packet pktcnt = N + (short_packet
-+ * exist ? 1 : 0)
-+ */
-+ deptsiz.b.xfersize = (_ep->total_len - _ep->xfer_count) > _ep->maxpacket ? _ep->maxpacket :
-+ (_ep->total_len - _ep->xfer_count);
-+ deptsiz.b.pktcnt = 1;
-+ _ep->xfer_len += deptsiz.b.xfersize;
-+
-+ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
-+ DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n",
-+ _ep->xfer_len,
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
-+
-+ /* Write the DMA register */
-+ if (_core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
-+ dwc_write_reg32 (&(in_regs->diepdma),
-+ CPHYSADDR((uint32_t)_ep->dma_addr)); // winder
-+ }
-+
-+ /* EP enable, IN data in FIFO */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+ dwc_write_reg32(&in_regs->diepctl, depctl.d32);
-+
-+ /**
-+ * Enable the Non-Periodic Tx FIFO empty interrupt, the
-+ * data will be written into the fifo by the ISR.
-+ */
-+ if (!_core_if->dma_enable) {
-+ /* First clear it from GINTSTS */
-+ intr_mask.b.nptxfempty = 1;
-+ dwc_write_reg32( &_core_if->core_global_regs->gintsts,
-+ intr_mask.d32 );
-+
-+ dwc_modify_reg32( &_core_if->core_global_regs->gintmsk,
-+ intr_mask.d32, intr_mask.d32);
-+ }
-+
-+ }
-+
-+}
-+
-+#ifdef DEBUG
-+void dump_msg(const u8 *buf, unsigned int length)
-+{
-+ unsigned int start, num, i;
-+ char line[52], *p;
-+
-+ if (length >= 512)
-+ return;
-+ start = 0;
-+ while (length > 0) {
-+ num = min(length, 16u);
-+ p = line;
-+ for (i = 0; i < num; ++i) {
-+ if (i == 8)
-+ *p++ = ' ';
-+ sprintf(p, " %02x", buf[i]);
-+ p += 3;
-+ }
-+ *p = 0;
-+ DWC_PRINT( "%6x: %s\n", start, line);
-+ buf += num;
-+ start += num;
-+ length -= num;
-+ }
-+}
-+#else
-+static inline void dump_msg(const u8 *buf, unsigned int length)
-+{
-+}
-+#endif
-+
-+/**
-+ * This function writes a packet into the Tx FIFO associated with the
-+ * EP. For non-periodic EPs the non-periodic Tx FIFO is written. For
-+ * periodic EPs the periodic Tx FIFO associated with the EP is written
-+ * with all packets for the next micro-frame.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ * @param _ep The EP to write packet for.
-+ * @param _dma Indicates if DMA is being used.
-+ */
-+void dwc_otg_ep_write_packet(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep, int _dma)
-+{
-+ /**
-+ * The buffer is padded to DWORD on a per packet basis in
-+ * slave/dma mode if the MPS is not DWORD aligned. The last
-+ * packet, if short, is also padded to a multiple of DWORD.
-+ *
-+ * ep->xfer_buff always starts DWORD aligned in memory and is a
-+ * multiple of DWORD in length
-+ *
-+ * ep->xfer_len can be any number of bytes
-+ *
-+ * ep->xfer_count is a multiple of ep->maxpacket until the last
-+ * packet
-+ *
-+ * FIFO access is DWORD */
-+
-+ uint32_t i;
-+ uint32_t byte_count;
-+ uint32_t dword_count;
-+ uint32_t *fifo;
-+ uint32_t *data_buff = (uint32_t *)_ep->xfer_buff;
-+
-+ //DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, _core_if, _ep);
-+ if (_ep->xfer_count >= _ep->xfer_len) {
-+ DWC_WARN("%s() No data for EP%d!!!\n", __func__, _ep->num);
-+ return;
-+ }
-+
-+ /* Find the byte length of the packet either short packet or MPS */
-+ if ((_ep->xfer_len - _ep->xfer_count) < _ep->maxpacket) {
-+ byte_count = _ep->xfer_len - _ep->xfer_count;
-+ }
-+ else {
-+ byte_count = _ep->maxpacket;
-+ }
-+
-+ /* Find the DWORD length, padded by extra bytes as neccessary if MPS
-+ * is not a multiple of DWORD */
-+ dword_count = (byte_count + 3) / 4;
-+
-+#ifdef VERBOSE
-+ dump_msg(_ep->xfer_buff, byte_count);
-+#endif
-+ if (_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ /**@todo NGS Where are the Periodic Tx FIFO addresses
-+ * intialized? What should this be? */
-+ fifo = _core_if->data_fifo[_ep->tx_fifo_num];
-+ } else {
-+ fifo = _core_if->data_fifo[_ep->num];
-+ }
-+
-+ DWC_DEBUGPL((DBG_PCDV|DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n",
-+ fifo, data_buff, *data_buff, byte_count);
-+
-+
-+ if (!_dma) {
-+ for (i=0; i<dword_count; i++, data_buff++) {
-+ dwc_write_reg32( fifo, *data_buff );
-+ }
-+ }
-+
-+ _ep->xfer_count += byte_count;
-+ _ep->xfer_buff += byte_count;
-+#if 1 // winder, why do we need this??
-+ _ep->dma_addr += byte_count;
-+#endif
-+}
-+
-+/**
-+ * Set the EP STALL.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ * @param _ep The EP to set the stall on.
-+ */
-+void dwc_otg_ep_set_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
-+{
-+ depctl_data_t depctl;
-+ volatile uint32_t *depctl_addr;
-+
-+ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, _ep->num,
-+ (_ep->is_in?"IN":"OUT"));
-+
-+ if (_ep->is_in == 1) {
-+ depctl_addr = &(_core_if->dev_if->in_ep_regs[_ep->num]->diepctl);
-+ depctl.d32 = dwc_read_reg32(depctl_addr);
-+
-+ /* set the disable and stall bits */
-+ if (depctl.b.epena) {
-+ depctl.b.epdis = 1;
-+ }
-+ depctl.b.stall = 1;
-+ dwc_write_reg32(depctl_addr, depctl.d32);
-+
-+ } else {
-+ depctl_addr = &(_core_if->dev_if->out_ep_regs[_ep->num]->doepctl);
-+ depctl.d32 = dwc_read_reg32(depctl_addr);
-+
-+ /* set the stall bit */
-+ depctl.b.stall = 1;
-+ dwc_write_reg32(depctl_addr, depctl.d32);
-+ }
-+ DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr));
-+ return;
-+}
-+
-+/**
-+ * Clear the EP STALL.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ * @param _ep The EP to clear stall from.
-+ */
-+void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep)
-+{
-+ depctl_data_t depctl;
-+ volatile uint32_t *depctl_addr;
-+
-+ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, _ep->num,
-+ (_ep->is_in?"IN":"OUT"));
-+
-+ if (_ep->is_in == 1) {
-+ depctl_addr = &(_core_if->dev_if->in_ep_regs[_ep->num]->diepctl);
-+ } else {
-+ depctl_addr = &(_core_if->dev_if->out_ep_regs[_ep->num]->doepctl);
-+ }
-+
-+ depctl.d32 = dwc_read_reg32(depctl_addr);
-+
-+ /* clear the stall bits */
-+ depctl.b.stall = 0;
-+
-+ /*
-+ * USB Spec 9.4.5: For endpoints using data toggle, regardless
-+ * of whether an endpoint has the Halt feature set, a
-+ * ClearFeature(ENDPOINT_HALT) request always results in the
-+ * data toggle being reinitialized to DATA0.
-+ */
-+ if (_ep->type == DWC_OTG_EP_TYPE_INTR ||
-+ _ep->type == DWC_OTG_EP_TYPE_BULK) {
-+ depctl.b.setd0pid = 1; /* DATA0 */
-+ }
-+
-+ dwc_write_reg32(depctl_addr, depctl.d32);
-+ DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr));
-+ return;
-+}
-+
-+/**
-+ * This function reads a packet from the Rx FIFO into the destination
-+ * buffer. To read SETUP data use dwc_otg_read_setup_packet.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ * @param _dest Destination buffer for the packet.
-+ * @param _bytes Number of bytes to copy to the destination.
-+ */
-+void dwc_otg_read_packet(dwc_otg_core_if_t *_core_if,
-+ uint8_t *_dest,
-+ uint16_t _bytes)
-+{
-+ int i;
-+ int word_count = (_bytes + 3) / 4;
-+
-+ volatile uint32_t *fifo = _core_if->data_fifo[0];
-+ uint32_t *data_buff = (uint32_t *)_dest;
-+
-+ /**
-+ * @todo Account for the case where _dest is not dword aligned. This
-+ * requires reading data from the FIFO into a uint32_t temp buffer,
-+ * then moving it into the data buffer.
-+ */
-+
-+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__,
-+ _core_if, _dest, _bytes);
-+
-+ for (i=0; i<word_count; i++, data_buff++) {
-+ *data_buff = dwc_read_reg32(fifo);
-+ }
-+
-+ return;
-+}
-+
-+
-+#ifdef DEBUG
-+/**
-+ * This functions reads the device registers and prints them
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ */
-+void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *_core_if)
-+{
-+ int i;
-+ volatile uint32_t *addr;
-+
-+ DWC_PRINT("Device Global Registers\n");
-+ addr=&_core_if->dev_if->dev_global_regs->dcfg;
-+ DWC_PRINT("DCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->dev_if->dev_global_regs->dctl;
-+ DWC_PRINT("DCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->dev_if->dev_global_regs->dsts;
-+ DWC_PRINT("DSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->dev_if->dev_global_regs->diepmsk;
-+ DWC_PRINT("DIEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->dev_if->dev_global_regs->doepmsk;
-+ DWC_PRINT("DOEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->dev_if->dev_global_regs->daint;
-+ DWC_PRINT("DAINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->dev_if->dev_global_regs->dtknqr1;
-+ DWC_PRINT("DTKNQR1 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ if (_core_if->hwcfg2.b.dev_token_q_depth > 6) {
-+ addr=&_core_if->dev_if->dev_global_regs->dtknqr2;
-+ DWC_PRINT("DTKNQR2 @0x%08X : 0x%08X\n",
-+ (uint32_t)addr,dwc_read_reg32(addr));
-+ }
-+
-+ addr=&_core_if->dev_if->dev_global_regs->dvbusdis;
-+ DWC_PRINT("DVBUSID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+
-+ addr=&_core_if->dev_if->dev_global_regs->dvbuspulse;
-+ DWC_PRINT("DVBUSPULSE @0x%08X : 0x%08X\n",
-+ (uint32_t)addr,dwc_read_reg32(addr));
-+
-+ if (_core_if->hwcfg2.b.dev_token_q_depth > 14) {
-+ addr = &_core_if->dev_if->dev_global_regs->dtknqr3_dthrctl;
-+ DWC_PRINT("DTKNQR3 @0x%08X : 0x%08X\n",
-+ (uint32_t)addr, dwc_read_reg32(addr));
-+ }
-+
-+ if (_core_if->hwcfg2.b.dev_token_q_depth > 22) {
-+ addr = &_core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
-+ DWC_PRINT("DTKNQR4 @0x%08X : 0x%08X\n", (uint32_t) addr,
-+ dwc_read_reg32(addr));
-+ }
-+ for (i = 0; i <= _core_if->dev_if->num_in_eps; i++) {
-+ DWC_PRINT("Device IN EP %d Registers\n", i);
-+ addr=&_core_if->dev_if->in_ep_regs[i]->diepctl;
-+ DWC_PRINT("DIEPCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->dev_if->in_ep_regs[i]->diepint;
-+ DWC_PRINT("DIEPINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->dev_if->in_ep_regs[i]->dieptsiz;
-+ DWC_PRINT("DIETSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->dev_if->in_ep_regs[i]->diepdma;
-+ DWC_PRINT("DIEPDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+
-+addr = &_core_if->dev_if->in_ep_regs[i]->dtxfsts;
-+ DWC_PRINT("DTXFSTS @0x%08X : 0x%08X\n", (uint32_t) addr,
-+ dwc_read_reg32(addr));
-+ }
-+ for (i = 0; i <= _core_if->dev_if->num_out_eps; i++) {
-+ DWC_PRINT("Device OUT EP %d Registers\n", i);
-+ addr=&_core_if->dev_if->out_ep_regs[i]->doepctl;
-+ DWC_PRINT("DOEPCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->dev_if->out_ep_regs[i]->doepfn;
-+ DWC_PRINT("DOEPFN @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->dev_if->out_ep_regs[i]->doepint;
-+ DWC_PRINT("DOEPINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->dev_if->out_ep_regs[i]->doeptsiz;
-+ DWC_PRINT("DOETSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->dev_if->out_ep_regs[i]->doepdma;
-+ DWC_PRINT("DOEPDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ }
-+ return;
-+}
-+
-+/**
-+ * This function reads the host registers and prints them
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ */
-+void dwc_otg_dump_host_registers(dwc_otg_core_if_t *_core_if)
-+{
-+ int i;
-+ volatile uint32_t *addr;
-+
-+ DWC_PRINT("Host Global Registers\n");
-+ addr=&_core_if->host_if->host_global_regs->hcfg;
-+ DWC_PRINT("HCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->host_if->host_global_regs->hfir;
-+ DWC_PRINT("HFIR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->host_if->host_global_regs->hfnum;
-+ DWC_PRINT("HFNUM @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->host_if->host_global_regs->hptxsts;
-+ DWC_PRINT("HPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->host_if->host_global_regs->haint;
-+ DWC_PRINT("HAINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->host_if->host_global_regs->haintmsk;
-+ DWC_PRINT("HAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=_core_if->host_if->hprt0;
-+ DWC_PRINT("HPRT0 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+
-+ for (i=0; i<_core_if->core_params->host_channels; i++) {
-+ DWC_PRINT("Host Channel %d Specific Registers\n", i);
-+ addr=&_core_if->host_if->hc_regs[i]->hcchar;
-+ DWC_PRINT("HCCHAR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->host_if->hc_regs[i]->hcsplt;
-+ DWC_PRINT("HCSPLT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->host_if->hc_regs[i]->hcint;
-+ DWC_PRINT("HCINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->host_if->hc_regs[i]->hcintmsk;
-+ DWC_PRINT("HCINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->host_if->hc_regs[i]->hctsiz;
-+ DWC_PRINT("HCTSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->host_if->hc_regs[i]->hcdma;
-+ DWC_PRINT("HCDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+
-+ }
-+ return;
-+}
-+
-+/**
-+ * This function reads the core global registers and prints them
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ */
-+void dwc_otg_dump_global_registers(dwc_otg_core_if_t *_core_if)
-+{
-+ int i;
-+ volatile uint32_t *addr;
-+
-+ DWC_PRINT("Core Global Registers\n");
-+ addr=&_core_if->core_global_regs->gotgctl;
-+ DWC_PRINT("GOTGCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->core_global_regs->gotgint;
-+ DWC_PRINT("GOTGINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->core_global_regs->gahbcfg;
-+ DWC_PRINT("GAHBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->core_global_regs->gusbcfg;
-+ DWC_PRINT("GUSBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->core_global_regs->grstctl;
-+ DWC_PRINT("GRSTCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->core_global_regs->gintsts;
-+ DWC_PRINT("GINTSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->core_global_regs->gintmsk;
-+ DWC_PRINT("GINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->core_global_regs->grxstsr;
-+ DWC_PRINT("GRXSTSR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ //addr=&_core_if->core_global_regs->grxstsp;
-+ //DWC_PRINT("GRXSTSP @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->core_global_regs->grxfsiz;
-+ DWC_PRINT("GRXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->core_global_regs->gnptxfsiz;
-+ DWC_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->core_global_regs->gnptxsts;
-+ DWC_PRINT("GNPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->core_global_regs->gi2cctl;
-+ DWC_PRINT("GI2CCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->core_global_regs->gpvndctl;
-+ DWC_PRINT("GPVNDCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->core_global_regs->ggpio;
-+ DWC_PRINT("GGPIO @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->core_global_regs->guid;
-+ DWC_PRINT("GUID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->core_global_regs->gsnpsid;
-+ DWC_PRINT("GSNPSID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->core_global_regs->ghwcfg1;
-+ DWC_PRINT("GHWCFG1 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->core_global_regs->ghwcfg2;
-+ DWC_PRINT("GHWCFG2 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->core_global_regs->ghwcfg3;
-+ DWC_PRINT("GHWCFG3 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->core_global_regs->ghwcfg4;
-+ DWC_PRINT("GHWCFG4 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+ addr=&_core_if->core_global_regs->hptxfsiz;
-+ DWC_PRINT("HPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
-+
-+ for (i=0; i<_core_if->hwcfg4.b.num_dev_perio_in_ep; i++) {
-+ addr=&_core_if->core_global_regs->dptxfsiz_dieptxf[i];
-+ DWC_PRINT("DPTXFSIZ[%d] @0x%08X : 0x%08X\n",i,(uint32_t)addr,dwc_read_reg32(addr));
-+ }
-+
-+}
-+#endif
-+
-+/**
-+ * Flush a Tx FIFO.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ * @param _num Tx FIFO to flush.
-+ */
-+extern void dwc_otg_flush_tx_fifo( dwc_otg_core_if_t *_core_if,
-+ const int _num )
-+{
-+ dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
-+ volatile grstctl_t greset = { .d32 = 0};
-+ int count = 0;
-+
-+ DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "Flush Tx FIFO %d\n", _num);
-+
-+ greset.b.txfflsh = 1;
-+ greset.b.txfnum = _num;
-+ dwc_write_reg32( &global_regs->grstctl, greset.d32 );
-+
-+ do {
-+ greset.d32 = dwc_read_reg32( &global_regs->grstctl);
-+ if (++count > 10000){
-+ DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
-+ __func__, greset.d32,
-+ dwc_read_reg32( &global_regs->gnptxsts));
-+ break;
-+ }
-+
-+ udelay(1);
-+ } while (greset.b.txfflsh == 1);
-+ /* Wait for 3 PHY Clocks*/
-+ UDELAY(1);
-+}
-+
-+/**
-+ * Flush Rx FIFO.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ */
-+extern void dwc_otg_flush_rx_fifo( dwc_otg_core_if_t *_core_if )
-+{
-+ dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
-+ volatile grstctl_t greset = { .d32 = 0};
-+ int count = 0;
-+
-+ DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__);
-+ /*
-+ *
-+ */
-+ greset.b.rxfflsh = 1;
-+ dwc_write_reg32( &global_regs->grstctl, greset.d32 );
-+
-+ do {
-+ greset.d32 = dwc_read_reg32( &global_regs->grstctl);
-+ if (++count > 10000){
-+ DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__,
-+ greset.d32);
-+ break;
-+ }
-+ } while (greset.b.rxfflsh == 1);
-+ /* Wait for 3 PHY Clocks*/
-+ UDELAY(1);
-+}
-+
-+/**
-+ * Do core a soft reset of the core. Be careful with this because it
-+ * resets all the internal state machines of the core.
-+ */
-+
-+void dwc_otg_core_reset(dwc_otg_core_if_t *_core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs = _core_if->core_global_regs;
-+ volatile grstctl_t greset = { .d32 = 0};
-+ int count = 0;
-+
-+ DWC_DEBUGPL(DBG_CILV, "%s\n", __func__);
-+ /* Wait for AHB master IDLE state. */
-+ do {
-+ UDELAY(10);
-+ greset.d32 = dwc_read_reg32( &global_regs->grstctl);
-+ if (++count > 100000){
-+ DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x %x\n", __func__,
-+ greset.d32, greset.b.ahbidle);
-+ return;
-+ }
-+ } while (greset.b.ahbidle == 0);
-+
-+// winder add.
-+#if 1
-+ /* Note: Actually, I don't exactly why we need to put delay here. */
-+ MDELAY(100);
-+#endif
-+ /* Core Soft Reset */
-+ count = 0;
-+ greset.b.csftrst = 1;
-+ dwc_write_reg32( &global_regs->grstctl, greset.d32 );
-+// winder add.
-+#if 1
-+ /* Note: Actually, I don't exactly why we need to put delay here. */
-+ MDELAY(100);
-+#endif
-+ do {
-+ greset.d32 = dwc_read_reg32( &global_regs->grstctl);
-+ if (++count > 10000){
-+ DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", __func__,
-+ greset.d32);
-+ break;
-+ }
-+ udelay(1);
-+ } while (greset.b.csftrst == 1);
-+ /* Wait for 3 PHY Clocks*/
-+ //DWC_PRINT("100ms\n");
-+ MDELAY(100);
-+}
-+
-+
-+
-+/**
-+ * Register HCD callbacks. The callbacks are used to start and stop
-+ * the HCD for interrupt processing.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ * @param _cb the HCD callback structure.
-+ * @param _p pointer to be passed to callback function (usb_hcd*).
-+ */
-+extern void dwc_otg_cil_register_hcd_callbacks( dwc_otg_core_if_t *_core_if,
-+ dwc_otg_cil_callbacks_t *_cb,
-+ void *_p)
-+{
-+ _core_if->hcd_cb = _cb;
-+ _cb->p = _p;
-+}
-+
-+/**
-+ * Register PCD callbacks. The callbacks are used to start and stop
-+ * the PCD for interrupt processing.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ * @param _cb the PCD callback structure.
-+ * @param _p pointer to be passed to callback function (pcd*).
-+ */
-+extern void dwc_otg_cil_register_pcd_callbacks( dwc_otg_core_if_t *_core_if,
-+ dwc_otg_cil_callbacks_t *_cb,
-+ void *_p)
-+{
-+ _core_if->pcd_cb = _cb;
-+ _cb->p = _p;
-+}
-+
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_cil.h
-@@ -0,0 +1,911 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_cil.h $
-+ * $Revision: 1.1.1.1 $
-+ * $Date: 2009-04-17 06:15:34 $
-+ * $Change: 631780 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+#if !defined(__DWC_CIL_H__)
-+#define __DWC_CIL_H__
-+
-+#include "dwc_otg_plat.h"
-+
-+#include "dwc_otg_regs.h"
-+#ifdef DEBUG
-+#include "linux/timer.h"
-+#endif
-+
-+/* the OTG capabilities. */
-+#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0
-+#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1
-+#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
-+/* the maximum speed of operation in host and device mode. */
-+#define DWC_SPEED_PARAM_HIGH 0
-+#define DWC_SPEED_PARAM_FULL 1
-+/* the PHY clock rate in low power mode when connected to a
-+ * Low Speed device in host mode. */
-+#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0
-+#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1
-+/* the type of PHY interface to use. */
-+#define DWC_PHY_TYPE_PARAM_FS 0
-+#define DWC_PHY_TYPE_PARAM_UTMI 1
-+#define DWC_PHY_TYPE_PARAM_ULPI 2
-+/* whether to use the internal or external supply to
-+ * drive the vbus with a ULPI phy. */
-+#define DWC_PHY_ULPI_INTERNAL_VBUS 0
-+#define DWC_PHY_ULPI_EXTERNAL_VBUS 1
-+/* EP type. */
-+
-+/**
-+ * @file
-+ * This file contains the interface to the Core Interface Layer.
-+ */
-+
-+/**
-+ * The <code>dwc_ep</code> structure represents the state of a single
-+ * endpoint when acting in device mode. It contains the data items
-+ * needed for an endpoint to be activated and transfer packets.
-+ */
-+typedef struct dwc_ep {
-+ /** EP number used for register address lookup */
-+ uint8_t num;
-+ /** EP direction 0 = OUT */
-+ unsigned is_in : 1;
-+ /** EP active. */
-+ unsigned active : 1;
-+
-+ /** Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic Tx FIFO
-+ If dedicated Tx FIFOs are enabled for all IN Eps - Tx FIFO # FOR IN EPs*/
-+ unsigned tx_fifo_num : 4;
-+ /** EP type: 0 - Control, 1 - ISOC, 2 - BULK, 3 - INTR */
-+ unsigned type : 2;
-+#define DWC_OTG_EP_TYPE_CONTROL 0
-+#define DWC_OTG_EP_TYPE_ISOC 1
-+#define DWC_OTG_EP_TYPE_BULK 2
-+#define DWC_OTG_EP_TYPE_INTR 3
-+
-+ /** DATA start PID for INTR and BULK EP */
-+ unsigned data_pid_start : 1;
-+ /** Frame (even/odd) for ISOC EP */
-+ unsigned even_odd_frame : 1;
-+ /** Max Packet bytes */
-+ unsigned maxpacket : 11;
-+
-+ /** @name Transfer state */
-+ /** @{ */
-+
-+ /**
-+ * Pointer to the beginning of the transfer buffer -- do not modify
-+ * during transfer.
-+ */
-+
-+ uint32_t dma_addr;
-+
-+ uint8_t *start_xfer_buff;
-+ /** pointer to the transfer buffer */
-+ uint8_t *xfer_buff;
-+ /** Number of bytes to transfer */
-+ unsigned xfer_len : 19;
-+ /** Number of bytes transferred. */
-+ unsigned xfer_count : 19;
-+ /** Sent ZLP */
-+ unsigned sent_zlp : 1;
-+ /** Total len for control transfer */
-+ unsigned total_len : 19;
-+
-+ /** stall clear flag */
-+ unsigned stall_clear_flag : 1;
-+
-+ /** @} */
-+} dwc_ep_t;
-+
-+/*
-+ * Reasons for halting a host channel.
-+ */
-+typedef enum dwc_otg_halt_status {
-+ DWC_OTG_HC_XFER_NO_HALT_STATUS,
-+ DWC_OTG_HC_XFER_COMPLETE,
-+ DWC_OTG_HC_XFER_URB_COMPLETE,
-+ DWC_OTG_HC_XFER_ACK,
-+ DWC_OTG_HC_XFER_NAK,
-+ DWC_OTG_HC_XFER_NYET,
-+ DWC_OTG_HC_XFER_STALL,
-+ DWC_OTG_HC_XFER_XACT_ERR,
-+ DWC_OTG_HC_XFER_FRAME_OVERRUN,
-+ DWC_OTG_HC_XFER_BABBLE_ERR,
-+ DWC_OTG_HC_XFER_DATA_TOGGLE_ERR,
-+ DWC_OTG_HC_XFER_AHB_ERR,
-+ DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE,
-+ DWC_OTG_HC_XFER_URB_DEQUEUE
-+} dwc_otg_halt_status_e;
-+
-+/**
-+ * Host channel descriptor. This structure represents the state of a single
-+ * host channel when acting in host mode. It contains the data items needed to
-+ * transfer packets to an endpoint via a host channel.
-+ */
-+typedef struct dwc_hc {
-+ /** Host channel number used for register address lookup */
-+ uint8_t hc_num;
-+
-+ /** Device to access */
-+ unsigned dev_addr : 7;
-+
-+ /** EP to access */
-+ unsigned ep_num : 4;
-+
-+ /** EP direction. 0: OUT, 1: IN */
-+ unsigned ep_is_in : 1;
-+
-+ /**
-+ * EP speed.
-+ * One of the following values:
-+ * - DWC_OTG_EP_SPEED_LOW
-+ * - DWC_OTG_EP_SPEED_FULL
-+ * - DWC_OTG_EP_SPEED_HIGH
-+ */
-+ unsigned speed : 2;
-+#define DWC_OTG_EP_SPEED_LOW 0
-+#define DWC_OTG_EP_SPEED_FULL 1
-+#define DWC_OTG_EP_SPEED_HIGH 2
-+
-+ /**
-+ * Endpoint type.
-+ * One of the following values:
-+ * - DWC_OTG_EP_TYPE_CONTROL: 0
-+ * - DWC_OTG_EP_TYPE_ISOC: 1
-+ * - DWC_OTG_EP_TYPE_BULK: 2
-+ * - DWC_OTG_EP_TYPE_INTR: 3
-+ */
-+ unsigned ep_type : 2;
-+
-+ /** Max packet size in bytes */
-+ unsigned max_packet : 11;
-+
-+ /**
-+ * PID for initial transaction.
-+ * 0: DATA0,<br>
-+ * 1: DATA2,<br>
-+ * 2: DATA1,<br>
-+ * 3: MDATA (non-Control EP),
-+ * SETUP (Control EP)
-+ */
-+ unsigned data_pid_start : 2;
-+#define DWC_OTG_HC_PID_DATA0 0
-+#define DWC_OTG_HC_PID_DATA2 1
-+#define DWC_OTG_HC_PID_DATA1 2
-+#define DWC_OTG_HC_PID_MDATA 3
-+#define DWC_OTG_HC_PID_SETUP 3
-+
-+ /** Number of periodic transactions per (micro)frame */
-+ unsigned multi_count: 2;
-+
-+ /** @name Transfer State */
-+ /** @{ */
-+
-+ /** Pointer to the current transfer buffer position. */
-+ uint8_t *xfer_buff;
-+ /** Total number of bytes to transfer. */
-+ uint32_t xfer_len;
-+ /** Number of bytes transferred so far. */
-+ uint32_t xfer_count;
-+ /** Packet count at start of transfer.*/
-+ uint16_t start_pkt_count;
-+
-+ /**
-+ * Flag to indicate whether the transfer has been started. Set to 1 if
-+ * it has been started, 0 otherwise.
-+ */
-+ uint8_t xfer_started;
-+
-+ /**
-+ * Set to 1 to indicate that a PING request should be issued on this
-+ * channel. If 0, process normally.
-+ */
-+ uint8_t do_ping;
-+
-+ /**
-+ * Set to 1 to indicate that the error count for this transaction is
-+ * non-zero. Set to 0 if the error count is 0.
-+ */
-+ uint8_t error_state;
-+
-+ /**
-+ * Set to 1 to indicate that this channel should be halted the next
-+ * time a request is queued for the channel. This is necessary in
-+ * slave mode if no request queue space is available when an attempt
-+ * is made to halt the channel.
-+ */
-+ uint8_t halt_on_queue;
-+
-+ /**
-+ * Set to 1 if the host channel has been halted, but the core is not
-+ * finished flushing queued requests. Otherwise 0.
-+ */
-+ uint8_t halt_pending;
-+
-+ /**
-+ * Reason for halting the host channel.
-+ */
-+ dwc_otg_halt_status_e halt_status;
-+
-+ /*
-+ * Split settings for the host channel
-+ */
-+ uint8_t do_split; /**< Enable split for the channel */
-+ uint8_t complete_split; /**< Enable complete split */
-+ uint8_t hub_addr; /**< Address of high speed hub */
-+
-+ uint8_t port_addr; /**< Port of the low/full speed device */
-+ /** Split transaction position
-+ * One of the following values:
-+ * - DWC_HCSPLIT_XACTPOS_MID
-+ * - DWC_HCSPLIT_XACTPOS_BEGIN
-+ * - DWC_HCSPLIT_XACTPOS_END
-+ * - DWC_HCSPLIT_XACTPOS_ALL */
-+ uint8_t xact_pos;
-+
-+ /** Set when the host channel does a short read. */
-+ uint8_t short_read;
-+
-+ /**
-+ * Number of requests issued for this channel since it was assigned to
-+ * the current transfer (not counting PINGs).
-+ */
-+ uint8_t requests;
-+
-+ /**
-+ * Queue Head for the transfer being processed by this channel.
-+ */
-+ struct dwc_otg_qh *qh;
-+
-+ /** @} */
-+
-+ /** Entry in list of host channels. */
-+ struct list_head hc_list_entry;
-+} dwc_hc_t;
-+
-+/**
-+ * The following parameters may be specified when starting the module. These
-+ * parameters define how the DWC_otg controller should be configured.
-+ * Parameter values are passed to the CIL initialization function
-+ * dwc_otg_cil_init.
-+ */
-+
-+typedef struct dwc_otg_core_params
-+{
-+ int32_t opt;
-+//#define dwc_param_opt_default 1
-+ /**
-+ * Specifies the OTG capabilities. The driver will automatically
-+ * detect the value for this parameter if none is specified.
-+ * 0 - HNP and SRP capable (default)
-+ * 1 - SRP Only capable
-+ * 2 - No HNP/SRP capable
-+ */
-+ int32_t otg_cap;
-+#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0
-+#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1
-+#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
-+//#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE
-+ /**
-+ * Specifies whether to use slave or DMA mode for accessing the data
-+ * FIFOs. The driver will automatically detect the value for this
-+ * parameter if none is specified.
-+ * 0 - Slave
-+ * 1 - DMA (default, if available)
-+ */
-+ int32_t dma_enable;
-+//#define dwc_param_dma_enable_default 1
-+ /** The DMA Burst size (applicable only for External DMA
-+ * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32)
-+ */
-+ int32_t dma_burst_size; /* Translate this to GAHBCFG values */
-+//#define dwc_param_dma_burst_size_default 32
-+ /**
-+ * Specifies the maximum speed of operation in host and device mode.
-+ * The actual speed depends on the speed of the attached device and
-+ * the value of phy_type. The actual speed depends on the speed of the
-+ * attached device.
-+ * 0 - High Speed (default)
-+ * 1 - Full Speed
-+ */
-+ int32_t speed;
-+//#define dwc_param_speed_default 0
-+#define DWC_SPEED_PARAM_HIGH 0
-+#define DWC_SPEED_PARAM_FULL 1
-+
-+ /** Specifies whether low power mode is supported when attached
-+ * to a Full Speed or Low Speed device in host mode.
-+ * 0 - Don't support low power mode (default)
-+ * 1 - Support low power mode
-+ */
-+ int32_t host_support_fs_ls_low_power;
-+//#define dwc_param_host_support_fs_ls_low_power_default 0
-+ /** Specifies the PHY clock rate in low power mode when connected to a
-+ * Low Speed device in host mode. This parameter is applicable only if
-+ * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS
-+ * then defaults to 6 MHZ otherwise 48 MHZ.
-+ *
-+ * 0 - 48 MHz
-+ * 1 - 6 MHz
-+ */
-+ int32_t host_ls_low_power_phy_clk;
-+//#define dwc_param_host_ls_low_power_phy_clk_default 0
-+#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0
-+#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1
-+ /**
-+ * 0 - Use cC FIFO size parameters
-+ * 1 - Allow dynamic FIFO sizing (default)
-+ */
-+ int32_t enable_dynamic_fifo;
-+//#define dwc_param_enable_dynamic_fifo_default 1
-+ /** Total number of 4-byte words in the data FIFO memory. This
-+ * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic
-+ * Tx FIFOs.
-+ * 32 to 32768 (default 8192)
-+ * Note: The total FIFO memory depth in the FPGA configuration is 8192.
-+ */
-+ int32_t data_fifo_size;
-+//#define dwc_param_data_fifo_size_default 8192
-+ /** Number of 4-byte words in the Rx FIFO in device mode when dynamic
-+ * FIFO sizing is enabled.
-+ * 16 to 32768 (default 1064)
-+ */
-+ int32_t dev_rx_fifo_size;
-+//#define dwc_param_dev_rx_fifo_size_default 1064
-+ /** Number of 4-byte words in the non-periodic Tx FIFO in device mode
-+ * when dynamic FIFO sizing is enabled.
-+ * 16 to 32768 (default 1024)
-+ */
-+ int32_t dev_nperio_tx_fifo_size;
-+//#define dwc_param_dev_nperio_tx_fifo_size_default 1024
-+ /** Number of 4-byte words in each of the periodic Tx FIFOs in device
-+ * mode when dynamic FIFO sizing is enabled.
-+ * 4 to 768 (default 256)
-+ */
-+ uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS];
-+//#define dwc_param_dev_perio_tx_fifo_size_default 256
-+ /** Number of 4-byte words in the Rx FIFO in host mode when dynamic
-+ * FIFO sizing is enabled.
-+ * 16 to 32768 (default 1024)
-+ */
-+ int32_t host_rx_fifo_size;
-+//#define dwc_param_host_rx_fifo_size_default 1024
-+ /** Number of 4-byte words in the non-periodic Tx FIFO in host mode
-+ * when Dynamic FIFO sizing is enabled in the core.
-+ * 16 to 32768 (default 1024)
-+ */
-+ int32_t host_nperio_tx_fifo_size;
-+//#define dwc_param_host_nperio_tx_fifo_size_default 1024
-+ /** Number of 4-byte words in the host periodic Tx FIFO when dynamic
-+ * FIFO sizing is enabled.
-+ * 16 to 32768 (default 1024)
-+ */
-+ int32_t host_perio_tx_fifo_size;
-+//#define dwc_param_host_perio_tx_fifo_size_default 1024
-+ /** The maximum transfer size supported in bytes.
-+ * 2047 to 65,535 (default 65,535)
-+ */
-+ int32_t max_transfer_size;
-+//#define dwc_param_max_transfer_size_default 65535
-+ /** The maximum number of packets in a transfer.
-+ * 15 to 511 (default 511)
-+ */
-+ int32_t max_packet_count;
-+//#define dwc_param_max_packet_count_default 511
-+ /** The number of host channel registers to use.
-+ * 1 to 16 (default 12)
-+ * Note: The FPGA configuration supports a maximum of 12 host channels.
-+ */
-+ int32_t host_channels;
-+//#define dwc_param_host_channels_default 12
-+ /** The number of endpoints in addition to EP0 available for device
-+ * mode operations.
-+ * 1 to 15 (default 6 IN and OUT)
-+ * Note: The FPGA configuration supports a maximum of 6 IN and OUT
-+ * endpoints in addition to EP0.
-+ */
-+ int32_t dev_endpoints;
-+//#define dwc_param_dev_endpoints_default 6
-+ /**
-+ * Specifies the type of PHY interface to use. By default, the driver
-+ * will automatically detect the phy_type.
-+ *
-+ * 0 - Full Speed PHY
-+ * 1 - UTMI+ (default)
-+ * 2 - ULPI
-+ */
-+ int32_t phy_type;
-+#define DWC_PHY_TYPE_PARAM_FS 0
-+#define DWC_PHY_TYPE_PARAM_UTMI 1
-+#define DWC_PHY_TYPE_PARAM_ULPI 2
-+//#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI
-+ /**
-+ * Specifies the UTMI+ Data Width. This parameter is
-+ * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI
-+ * PHY_TYPE, this parameter indicates the data width between
-+ * the MAC and the ULPI Wrapper.) Also, this parameter is
-+ * applicable only if the OTG_HSPHY_WIDTH cC parameter was set
-+ * to "8 and 16 bits", meaning that the core has been
-+ * configured to work at either data path width.
-+ *
-+ * 8 or 16 bits (default 16)
-+ */
-+ int32_t phy_utmi_width;
-+//#define dwc_param_phy_utmi_width_default 16
-+ /**
-+ * Specifies whether the ULPI operates at double or single
-+ * data rate. This parameter is only applicable if PHY_TYPE is
-+ * ULPI.
-+ *
-+ * 0 - single data rate ULPI interface with 8 bit wide data
-+ * bus (default)
-+ * 1 - double data rate ULPI interface with 4 bit wide data
-+ * bus
-+ */
-+ int32_t phy_ulpi_ddr;
-+//#define dwc_param_phy_ulpi_ddr_default 0
-+ /**
-+ * Specifies whether to use the internal or external supply to
-+ * drive the vbus with a ULPI phy.
-+ */
-+ int32_t phy_ulpi_ext_vbus;
-+#define DWC_PHY_ULPI_INTERNAL_VBUS 0
-+#define DWC_PHY_ULPI_EXTERNAL_VBUS 1
-+//#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS
-+ /**
-+ * Specifies whether to use the I2Cinterface for full speed PHY. This
-+ * parameter is only applicable if PHY_TYPE is FS.
-+ * 0 - No (default)
-+ * 1 - Yes
-+ */
-+ int32_t i2c_enable;
-+//#define dwc_param_i2c_enable_default 0
-+
-+ int32_t ulpi_fs_ls;
-+//#define dwc_param_ulpi_fs_ls_default 0
-+
-+ int32_t ts_dline;
-+//#define dwc_param_ts_dline_default 0
-+
-+ /**
-+ * Specifies whether dedicated transmit FIFOs are
-+ * enabled for non periodic IN endpoints in device mode
-+ * 0 - No
-+ * 1 - Yes
-+ */
-+ int32_t en_multiple_tx_fifo;
-+#define dwc_param_en_multiple_tx_fifo_default 1
-+
-+ /** Number of 4-byte words in each of the Tx FIFOs in device
-+ * mode when dynamic FIFO sizing is enabled.
-+ * 4 to 768 (default 256)
-+ */
-+ uint32_t dev_tx_fifo_size[MAX_TX_FIFOS];
-+#define dwc_param_dev_tx_fifo_size_default 256
-+
-+ /** Thresholding enable flag-
-+ * bit 0 - enable non-ISO Tx thresholding
-+ * bit 1 - enable ISO Tx thresholding
-+ * bit 2 - enable Rx thresholding
-+ */
-+ uint32_t thr_ctl;
-+#define dwc_param_thr_ctl_default 0
-+
-+ /** Thresholding length for Tx
-+ * FIFOs in 32 bit DWORDs
-+ */
-+ uint32_t tx_thr_length;
-+#define dwc_param_tx_thr_length_default 64
-+
-+ /** Thresholding length for Rx
-+ * FIFOs in 32 bit DWORDs
-+ */
-+ uint32_t rx_thr_length;
-+#define dwc_param_rx_thr_length_default 64
-+} dwc_otg_core_params_t;
-+
-+#ifdef DEBUG
-+struct dwc_otg_core_if;
-+typedef struct hc_xfer_info
-+{
-+ struct dwc_otg_core_if *core_if;
-+ dwc_hc_t *hc;
-+} hc_xfer_info_t;
-+#endif
-+
-+/**
-+ * The <code>dwc_otg_core_if</code> structure contains information needed to manage
-+ * the DWC_otg controller acting in either host or device mode. It
-+ * represents the programming view of the controller as a whole.
-+ */
-+typedef struct dwc_otg_core_if
-+{
-+ /** Parameters that define how the core should be configured.*/
-+ dwc_otg_core_params_t *core_params;
-+
-+ /** Core Global registers starting at offset 000h. */
-+ dwc_otg_core_global_regs_t *core_global_regs;
-+
-+ /** Device-specific information */
-+ dwc_otg_dev_if_t *dev_if;
-+ /** Host-specific information */
-+ dwc_otg_host_if_t *host_if;
-+
-+ /*
-+ * Set to 1 if the core PHY interface bits in USBCFG have been
-+ * initialized.
-+ */
-+ uint8_t phy_init_done;
-+
-+ /*
-+ * SRP Success flag, set by srp success interrupt in FS I2C mode
-+ */
-+ uint8_t srp_success;
-+ uint8_t srp_timer_started;
-+
-+ /* Common configuration information */
-+ /** Power and Clock Gating Control Register */
-+ volatile uint32_t *pcgcctl;
-+#define DWC_OTG_PCGCCTL_OFFSET 0xE00
-+
-+ /** Push/pop addresses for endpoints or host channels.*/
-+ uint32_t *data_fifo[MAX_EPS_CHANNELS];
-+#define DWC_OTG_DATA_FIFO_OFFSET 0x1000
-+#define DWC_OTG_DATA_FIFO_SIZE 0x1000
-+
-+ /** Total RAM for FIFOs (Bytes) */
-+ uint16_t total_fifo_size;
-+ /** Size of Rx FIFO (Bytes) */
-+ uint16_t rx_fifo_size;
-+ /** Size of Non-periodic Tx FIFO (Bytes) */
-+ uint16_t nperio_tx_fifo_size;
-+
-+ /** 1 if DMA is enabled, 0 otherwise. */
-+ uint8_t dma_enable;
-+
-+ /** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */
-+ uint8_t en_multiple_tx_fifo;
-+
-+ /** Set to 1 if multiple packets of a high-bandwidth transfer is in
-+ * process of being queued */
-+ uint8_t queuing_high_bandwidth;
-+
-+ /** Hardware Configuration -- stored here for convenience.*/
-+ hwcfg1_data_t hwcfg1;
-+ hwcfg2_data_t hwcfg2;
-+ hwcfg3_data_t hwcfg3;
-+ hwcfg4_data_t hwcfg4;
-+
-+ /** The operational State, during transations
-+ * (a_host>>a_peripherial and b_device=>b_host) this may not
-+ * match the core but allows the software to determine
-+ * transitions.
-+ */
-+ uint8_t op_state;
-+
-+ /**
-+ * Set to 1 if the HCD needs to be restarted on a session request
-+ * interrupt. This is required if no connector ID status change has
-+ * occurred since the HCD was last disconnected.
-+ */
-+ uint8_t restart_hcd_on_session_req;
-+
-+ /** HCD callbacks */
-+ /** A-Device is a_host */
-+#define A_HOST (1)
-+ /** A-Device is a_suspend */
-+#define A_SUSPEND (2)
-+ /** A-Device is a_peripherial */
-+#define A_PERIPHERAL (3)
-+ /** B-Device is operating as a Peripheral. */
-+#define B_PERIPHERAL (4)
-+ /** B-Device is operating as a Host. */
-+#define B_HOST (5)
-+
-+ /** HCD callbacks */
-+ struct dwc_otg_cil_callbacks *hcd_cb;
-+ /** PCD callbacks */
-+ struct dwc_otg_cil_callbacks *pcd_cb;
-+
-+ /** Device mode Periodic Tx FIFO Mask */
-+ uint32_t p_tx_msk;
-+ /** Device mode Periodic Tx FIFO Mask */
-+ uint32_t tx_msk;
-+
-+#ifdef DEBUG
-+ uint32_t start_hcchar_val[MAX_EPS_CHANNELS];
-+
-+ hc_xfer_info_t hc_xfer_info[MAX_EPS_CHANNELS];
-+ struct timer_list hc_xfer_timer[MAX_EPS_CHANNELS];
-+
-+#if 1 // winder
-+ uint32_t hfnum_7_samples;
-+ uint32_t hfnum_7_frrem_accum;
-+ uint32_t hfnum_0_samples;
-+ uint32_t hfnum_0_frrem_accum;
-+ uint32_t hfnum_other_samples;
-+ uint32_t hfnum_other_frrem_accum;
-+#else
-+ uint32_t hfnum_7_samples;
-+ uint64_t hfnum_7_frrem_accum;
-+ uint32_t hfnum_0_samples;
-+ uint64_t hfnum_0_frrem_accum;
-+ uint32_t hfnum_other_samples;
-+ uint64_t hfnum_other_frrem_accum;
-+#endif
-+ resource_size_t phys_addr; /* Added to support PLB DMA : phys-virt mapping */
-+#endif
-+
-+} dwc_otg_core_if_t;
-+
-+/*
-+ * The following functions support initialization of the CIL driver component
-+ * and the DWC_otg controller.
-+ */
-+extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *_reg_base_addr,
-+ dwc_otg_core_params_t *_core_params);
-+extern void dwc_otg_cil_remove(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_core_init(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_core_host_init(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_core_dev_init(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_enable_global_interrupts( dwc_otg_core_if_t *_core_if );
-+extern void dwc_otg_disable_global_interrupts( dwc_otg_core_if_t *_core_if );
-+
-+/** @name Device CIL Functions
-+ * The following functions support managing the DWC_otg controller in device
-+ * mode.
-+ */
-+/**@{*/
-+extern void dwc_otg_wakeup(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_read_setup_packet (dwc_otg_core_if_t *_core_if, uint32_t *_dest);
-+extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_ep0_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_ep_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep, int _dma);
-+extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep);
-+extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *_core_if);
-+/**@}*/
-+
-+/** @name Host CIL Functions
-+ * The following functions support managing the DWC_otg controller in host
-+ * mode.
-+ */
-+/**@{*/
-+extern void dwc_otg_hc_init(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-+extern void dwc_otg_hc_halt(dwc_otg_core_if_t *_core_if,
-+ dwc_hc_t *_hc,
-+ dwc_otg_halt_status_e _halt_status);
-+extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-+extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-+extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-+extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-+extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc);
-+extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *_core_if);
-+extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *_core_if);
-+
-+/**
-+ * This function Reads HPRT0 in preparation to modify. It keeps the
-+ * WC bits 0 so that if they are read as 1, they won't clear when you
-+ * write it back
-+ */
-+static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t *_core_if)
-+{
-+ hprt0_data_t hprt0;
-+ hprt0.d32 = dwc_read_reg32(_core_if->host_if->hprt0);
-+ hprt0.b.prtena = 0;
-+ hprt0.b.prtconndet = 0;
-+ hprt0.b.prtenchng = 0;
-+ hprt0.b.prtovrcurrchng = 0;
-+ return hprt0.d32;
-+}
-+
-+extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t *_core_if);
-+/**@}*/
-+
-+/** @name Common CIL Functions
-+ * The following functions support managing the DWC_otg controller in either
-+ * device or host mode.
-+ */
-+/**@{*/
-+
-+extern void dwc_otg_read_packet(dwc_otg_core_if_t *core_if,
-+ uint8_t *dest,
-+ uint16_t bytes);
-+
-+extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t *_core_if);
-+
-+extern void dwc_otg_flush_tx_fifo( dwc_otg_core_if_t *_core_if,
-+ const int _num );
-+extern void dwc_otg_flush_rx_fifo( dwc_otg_core_if_t *_core_if );
-+extern void dwc_otg_core_reset( dwc_otg_core_if_t *_core_if );
-+
-+#define NP_TXFIFO_EMPTY -1
-+#define MAX_NP_TXREQUEST_Q_SLOTS 8
-+/**
-+ * This function returns the endpoint number of the request at
-+ * the top of non-periodic TX FIFO, or -1 if the request FIFO is
-+ * empty.
-+ */
-+static inline int dwc_otg_top_nptxfifo_epnum(dwc_otg_core_if_t *_core_if) {
-+ gnptxsts_data_t txstatus = {.d32 = 0};
-+
-+ txstatus.d32 = dwc_read_reg32(&_core_if->core_global_regs->gnptxsts);
-+ return (txstatus.b.nptxqspcavail == MAX_NP_TXREQUEST_Q_SLOTS ?
-+ -1 : txstatus.b.nptxqtop_chnep);
-+}
-+/**
-+ * This function returns the Core Interrupt register.
-+ */
-+static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t *_core_if) {
-+ return (dwc_read_reg32(&_core_if->core_global_regs->gintsts) &
-+ dwc_read_reg32(&_core_if->core_global_regs->gintmsk));
-+}
-+
-+/**
-+ * This function returns the OTG Interrupt register.
-+ */
-+static inline uint32_t dwc_otg_read_otg_intr (dwc_otg_core_if_t *_core_if) {
-+ return (dwc_read_reg32 (&_core_if->core_global_regs->gotgint));
-+}
-+
-+/**
-+ * This function reads the Device All Endpoints Interrupt register and
-+ * returns the IN endpoint interrupt bits.
-+ */
-+static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t *_core_if) {
-+ uint32_t v;
-+ v = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daint) &
-+ dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk);
-+ return (v & 0xffff);
-+
-+}
-+
-+/**
-+ * This function reads the Device All Endpoints Interrupt register and
-+ * returns the OUT endpoint interrupt bits.
-+ */
-+static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t *_core_if) {
-+ uint32_t v;
-+ v = dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daint) &
-+ dwc_read_reg32(&_core_if->dev_if->dev_global_regs->daintmsk);
-+ return ((v & 0xffff0000) >> 16);
-+}
-+
-+/**
-+ * This function returns the Device IN EP Interrupt register
-+ */
-+static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t *_core_if,
-+ dwc_ep_t *_ep)
-+{
-+ dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
-+ uint32_t v, msk, emp;
-+ msk = dwc_read_reg32(&dev_if->dev_global_regs->diepmsk);
-+ emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk);
-+ msk |= ((emp >> _ep->num) & 0x1) << 7;
-+ v = dwc_read_reg32(&dev_if->in_ep_regs[_ep->num]->diepint) & msk;
-+/*
-+ dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
-+ uint32_t v;
-+ v = dwc_read_reg32(&dev_if->in_ep_regs[_ep->num]->diepint) &
-+ dwc_read_reg32(&dev_if->dev_global_regs->diepmsk);
-+*/
-+ return v;
-+}
-+/**
-+ * This function returns the Device OUT EP Interrupt register
-+ */
-+static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t *_core_if,
-+ dwc_ep_t *_ep)
-+{
-+ dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
-+ uint32_t v;
-+ v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) &
-+ dwc_read_reg32(&dev_if->dev_global_regs->doepmsk);
-+ return v;
-+}
-+
-+/**
-+ * This function returns the Host All Channel Interrupt register
-+ */
-+static inline uint32_t dwc_otg_read_host_all_channels_intr (dwc_otg_core_if_t *_core_if)
-+{
-+ return (dwc_read_reg32 (&_core_if->host_if->host_global_regs->haint));
-+}
-+
-+static inline uint32_t dwc_otg_read_host_channel_intr (dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc)
-+{
-+ return (dwc_read_reg32 (&_core_if->host_if->hc_regs[_hc->hc_num]->hcint));
-+}
-+
-+
-+/**
-+ * This function returns the mode of the operation, host or device.
-+ *
-+ * @return 0 - Device Mode, 1 - Host Mode
-+ */
-+static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t *_core_if) {
-+ return (dwc_read_reg32( &_core_if->core_global_regs->gintsts ) & 0x1);
-+}
-+
-+static inline uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t *_core_if)
-+{
-+ return (dwc_otg_mode(_core_if) != DWC_HOST_MODE);
-+}
-+static inline uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t *_core_if)
-+{
-+ return (dwc_otg_mode(_core_if) == DWC_HOST_MODE);
-+}
-+
-+extern int32_t dwc_otg_handle_common_intr( dwc_otg_core_if_t *_core_if );
-+
-+
-+/**@}*/
-+
-+/**
-+ * DWC_otg CIL callback structure. This structure allows the HCD and
-+ * PCD to register functions used for starting and stopping the PCD
-+ * and HCD for role change on for a DRD.
-+ */
-+typedef struct dwc_otg_cil_callbacks
-+{
-+ /** Start function for role change */
-+ int (*start) (void *_p);
-+ /** Stop Function for role change */
-+ int (*stop) (void *_p);
-+ /** Disconnect Function for role change */
-+ int (*disconnect) (void *_p);
-+ /** Resume/Remote wakeup Function */
-+ int (*resume_wakeup) (void *_p);
-+ /** Suspend function */
-+ int (*suspend) (void *_p);
-+ /** Session Start (SRP) */
-+ int (*session_start) (void *_p);
-+ /** Pointer passed to start() and stop() */
-+ void *p;
-+} dwc_otg_cil_callbacks_t;
-+
-+
-+
-+extern void dwc_otg_cil_register_pcd_callbacks( dwc_otg_core_if_t *_core_if,
-+ dwc_otg_cil_callbacks_t *_cb,
-+ void *_p);
-+extern void dwc_otg_cil_register_hcd_callbacks( dwc_otg_core_if_t *_core_if,
-+ dwc_otg_cil_callbacks_t *_cb,
-+ void *_p);
-+
-+
-+#endif
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_cil_ifx.h
-@@ -0,0 +1,58 @@
-+/******************************************************************************
-+**
-+** FILE NAME : dwc_otg_cil_ifx.h
-+** PROJECT : Twinpass/Danube
-+** MODULES : DWC OTG USB
-+**
-+** DATE : 07 Sep. 2007
-+** AUTHOR : Sung Winder
-+** DESCRIPTION : Default param value.
-+** COPYRIGHT : Copyright (c) 2007
-+** Infineon Technologies AG
-+** 2F, No.2, Li-Hsin Rd., Hsinchu Science Park,
-+** Hsin-chu City, 300 Taiwan.
-+**
-+** This program is free software; you can redistribute it and/or modify
-+** it under the terms of the GNU General Public License as published by
-+** the Free Software Foundation; either version 2 of the License, or
-+** (at your option) any later version.
-+**
-+** HISTORY
-+** $Date $Author $Comment
-+** 12 April 2007 Sung Winder Initiate Version
-+*******************************************************************************/
-+#if !defined(__DWC_OTG_CIL_IFX_H__)
-+#define __DWC_OTG_CIL_IFX_H__
-+
-+/* ================ Default param value ================== */
-+#define dwc_param_opt_default 1
-+#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE
-+#define dwc_param_dma_enable_default 1
-+#define dwc_param_dma_burst_size_default 32
-+#define dwc_param_speed_default DWC_SPEED_PARAM_HIGH
-+#define dwc_param_host_support_fs_ls_low_power_default 0
-+#define dwc_param_host_ls_low_power_phy_clk_default DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ
-+#define dwc_param_enable_dynamic_fifo_default 1
-+#define dwc_param_data_fifo_size_default 2048
-+#define dwc_param_dev_rx_fifo_size_default 1024
-+#define dwc_param_dev_nperio_tx_fifo_size_default 1024
-+#define dwc_param_dev_perio_tx_fifo_size_default 768
-+#define dwc_param_host_rx_fifo_size_default 640
-+#define dwc_param_host_nperio_tx_fifo_size_default 640
-+#define dwc_param_host_perio_tx_fifo_size_default 768
-+#define dwc_param_max_transfer_size_default 65535
-+#define dwc_param_max_packet_count_default 511
-+#define dwc_param_host_channels_default 16
-+#define dwc_param_dev_endpoints_default 6
-+#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI
-+#define dwc_param_phy_utmi_width_default 16
-+#define dwc_param_phy_ulpi_ddr_default 0
-+#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS
-+#define dwc_param_i2c_enable_default 0
-+#define dwc_param_ulpi_fs_ls_default 0
-+#define dwc_param_ts_dline_default 0
-+
-+/* ======================================================= */
-+
-+#endif // __DWC_OTG_CIL_IFX_H__
-+
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_cil_intr.c
-@@ -0,0 +1,708 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_cil_intr.c $
-+ * $Revision: 1.1.1.1 $
-+ * $Date: 2009-04-17 06:15:34 $
-+ * $Change: 553126 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+/** @file
-+ *
-+ * The Core Interface Layer provides basic services for accessing and
-+ * managing the DWC_otg hardware. These services are used by both the
-+ * Host Controller Driver and the Peripheral Controller Driver.
-+ *
-+ * This file contains the Common Interrupt handlers.
-+ */
-+#include "dwc_otg_plat.h"
-+#include "dwc_otg_regs.h"
-+#include "dwc_otg_cil.h"
-+
-+#ifdef DEBUG
-+inline const char *op_state_str( dwc_otg_core_if_t *_core_if )
-+{
-+ return (_core_if->op_state==A_HOST?"a_host":
-+ (_core_if->op_state==A_SUSPEND?"a_suspend":
-+ (_core_if->op_state==A_PERIPHERAL?"a_peripheral":
-+ (_core_if->op_state==B_PERIPHERAL?"b_peripheral":
-+ (_core_if->op_state==B_HOST?"b_host":
-+ "unknown")))));
-+}
-+#endif
-+
-+/** This function will log a debug message
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ */
-+int32_t dwc_otg_handle_mode_mismatch_intr (dwc_otg_core_if_t *_core_if)
-+{
-+ gintsts_data_t gintsts;
-+ DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n",
-+ dwc_otg_mode(_core_if) ? "Host" : "Device");
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.modemismatch = 1;
-+ dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
-+ return 1;
-+}
-+
-+/** Start the HCD. Helper function for using the HCD callbacks.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ */
-+static inline void hcd_start( dwc_otg_core_if_t *_core_if )
-+{
-+ if (_core_if->hcd_cb && _core_if->hcd_cb->start) {
-+ _core_if->hcd_cb->start( _core_if->hcd_cb->p );
-+ }
-+}
-+/** Stop the HCD. Helper function for using the HCD callbacks.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ */
-+static inline void hcd_stop( dwc_otg_core_if_t *_core_if )
-+{
-+ if (_core_if->hcd_cb && _core_if->hcd_cb->stop) {
-+ _core_if->hcd_cb->stop( _core_if->hcd_cb->p );
-+ }
-+}
-+/** Disconnect the HCD. Helper function for using the HCD callbacks.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ */
-+static inline void hcd_disconnect( dwc_otg_core_if_t *_core_if )
-+{
-+ if (_core_if->hcd_cb && _core_if->hcd_cb->disconnect) {
-+ _core_if->hcd_cb->disconnect( _core_if->hcd_cb->p );
-+ }
-+}
-+/** Inform the HCD the a New Session has begun. Helper function for
-+ * using the HCD callbacks.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ */
-+static inline void hcd_session_start( dwc_otg_core_if_t *_core_if )
-+{
-+ if (_core_if->hcd_cb && _core_if->hcd_cb->session_start) {
-+ _core_if->hcd_cb->session_start( _core_if->hcd_cb->p );
-+ }
-+}
-+
-+/** Start the PCD. Helper function for using the PCD callbacks.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ */
-+static inline void pcd_start( dwc_otg_core_if_t *_core_if )
-+{
-+ if (_core_if->pcd_cb && _core_if->pcd_cb->start ) {
-+ _core_if->pcd_cb->start( _core_if->pcd_cb->p );
-+ }
-+}
-+/** Stop the PCD. Helper function for using the PCD callbacks.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ */
-+static inline void pcd_stop( dwc_otg_core_if_t *_core_if )
-+{
-+ if (_core_if->pcd_cb && _core_if->pcd_cb->stop ) {
-+ _core_if->pcd_cb->stop( _core_if->pcd_cb->p );
-+ }
-+}
-+/** Suspend the PCD. Helper function for using the PCD callbacks.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ */
-+static inline void pcd_suspend( dwc_otg_core_if_t *_core_if )
-+{
-+ if (_core_if->pcd_cb && _core_if->pcd_cb->suspend ) {
-+ _core_if->pcd_cb->suspend( _core_if->pcd_cb->p );
-+ }
-+}
-+/** Resume the PCD. Helper function for using the PCD callbacks.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ */
-+static inline void pcd_resume( dwc_otg_core_if_t *_core_if )
-+{
-+ if (_core_if->pcd_cb && _core_if->pcd_cb->resume_wakeup ) {
-+ _core_if->pcd_cb->resume_wakeup( _core_if->pcd_cb->p );
-+ }
-+}
-+
-+/**
-+ * This function handles the OTG Interrupts. It reads the OTG
-+ * Interrupt Register (GOTGINT) to determine what interrupt has
-+ * occurred.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ */
-+int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t *_core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs =
-+ _core_if->core_global_regs;
-+ gotgint_data_t gotgint;
-+ gotgctl_data_t gotgctl;
-+ gintmsk_data_t gintmsk;
-+
-+ gotgint.d32 = dwc_read_reg32( &global_regs->gotgint);
-+ gotgctl.d32 = dwc_read_reg32( &global_regs->gotgctl);
-+ DWC_DEBUGPL(DBG_CIL, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint.d32,
-+ op_state_str(_core_if));
-+ //DWC_DEBUGPL(DBG_CIL, "gotgctl=%08x\n", gotgctl.d32 );
-+
-+ if (gotgint.b.sesenddet) {
-+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
-+ "Session End Detected++ (%s)\n",
-+ op_state_str(_core_if));
-+ gotgctl.d32 = dwc_read_reg32( &global_regs->gotgctl);
-+
-+ if (_core_if->op_state == B_HOST) {
-+ pcd_start( _core_if );
-+ _core_if->op_state = B_PERIPHERAL;
-+ } else {
-+ /* If not B_HOST and Device HNP still set. HNP
-+ * Did not succeed!*/
-+ if (gotgctl.b.devhnpen) {
-+ DWC_DEBUGPL(DBG_ANY, "Session End Detected\n");
-+ DWC_ERROR( "Device Not Connected/Responding!\n" );
-+ }
-+
-+ /* If Session End Detected the B-Cable has
-+ * been disconnected. */
-+ /* Reset PCD and Gadget driver to a
-+ * clean state. */
-+ pcd_stop(_core_if);
-+ }
-+ gotgctl.d32 = 0;
-+ gotgctl.b.devhnpen = 1;
-+ dwc_modify_reg32( &global_regs->gotgctl,
-+ gotgctl.d32, 0);
-+ }
-+ if (gotgint.b.sesreqsucstschng) {
-+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
-+ "Session Reqeust Success Status Change++\n");
-+ gotgctl.d32 = dwc_read_reg32( &global_regs->gotgctl);
-+ if (gotgctl.b.sesreqscs) {
-+ if ((_core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) &&
-+ (_core_if->core_params->i2c_enable)) {
-+ _core_if->srp_success = 1;
-+ }
-+ else {
-+ pcd_resume( _core_if );
-+ /* Clear Session Request */
-+ gotgctl.d32 = 0;
-+ gotgctl.b.sesreq = 1;
-+ dwc_modify_reg32( &global_regs->gotgctl,
-+ gotgctl.d32, 0);
-+ }
-+ }
-+ }
-+ if (gotgint.b.hstnegsucstschng) {
-+ /* Print statements during the HNP interrupt handling
-+ * can cause it to fail.*/
-+ gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl);
-+ if (gotgctl.b.hstnegscs) {
-+ if (dwc_otg_is_host_mode(_core_if) ) {
-+ _core_if->op_state = B_HOST;
-+ /*
-+ * Need to disable SOF interrupt immediately.
-+ * When switching from device to host, the PCD
-+ * interrupt handler won't handle the
-+ * interrupt if host mode is already set. The
-+ * HCD interrupt handler won't get called if
-+ * the HCD state is HALT. This means that the
-+ * interrupt does not get handled and Linux
-+ * complains loudly.
-+ */
-+ gintmsk.d32 = 0;
-+ gintmsk.b.sofintr = 1;
-+ dwc_modify_reg32(&global_regs->gintmsk,
-+ gintmsk.d32, 0);
-+ pcd_stop(_core_if);
-+ /*
-+ * Initialize the Core for Host mode.
-+ */
-+ hcd_start( _core_if );
-+ _core_if->op_state = B_HOST;
-+ }
-+ } else {
-+ gotgctl.d32 = 0;
-+ gotgctl.b.hnpreq = 1;
-+ gotgctl.b.devhnpen = 1;
-+ dwc_modify_reg32( &global_regs->gotgctl,
-+ gotgctl.d32, 0);
-+ DWC_DEBUGPL( DBG_ANY, "HNP Failed\n");
-+ DWC_ERROR( "Device Not Connected/Responding\n" );
-+ }
-+ }
-+ if (gotgint.b.hstnegdet) {
-+ /* The disconnect interrupt is set at the same time as
-+ * Host Negotiation Detected. During the mode
-+ * switch all interrupts are cleared so the disconnect
-+ * interrupt handler will not get executed.
-+ */
-+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
-+ "Host Negotiation Detected++ (%s)\n",
-+ (dwc_otg_is_host_mode(_core_if)?"Host":"Device"));
-+ if (dwc_otg_is_device_mode(_core_if)){
-+ DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n",_core_if->op_state);
-+ hcd_disconnect( _core_if );
-+ pcd_start( _core_if );
-+ _core_if->op_state = A_PERIPHERAL;
-+ } else {
-+ /*
-+ * Need to disable SOF interrupt immediately. When
-+ * switching from device to host, the PCD interrupt
-+ * handler won't handle the interrupt if host mode is
-+ * already set. The HCD interrupt handler won't get
-+ * called if the HCD state is HALT. This means that
-+ * the interrupt does not get handled and Linux
-+ * complains loudly.
-+ */
-+ gintmsk.d32 = 0;
-+ gintmsk.b.sofintr = 1;
-+ dwc_modify_reg32(&global_regs->gintmsk,
-+ gintmsk.d32, 0);
-+ pcd_stop( _core_if );
-+ hcd_start( _core_if );
-+ _core_if->op_state = A_HOST;
-+ }
-+ }
-+ if (gotgint.b.adevtoutchng) {
-+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
-+ "A-Device Timeout Change++\n");
-+ }
-+ if (gotgint.b.debdone) {
-+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
-+ "Debounce Done++\n");
-+ }
-+
-+ /* Clear GOTGINT */
-+ dwc_write_reg32 (&_core_if->core_global_regs->gotgint, gotgint.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This function handles the Connector ID Status Change Interrupt. It
-+ * reads the OTG Interrupt Register (GOTCTL) to determine whether this
-+ * is a Device to Host Mode transition or a Host Mode to Device
-+ * Transition.
-+ *
-+ * This only occurs when the cable is connected/removed from the PHY
-+ * connector.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ */
-+int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t *_core_if)
-+{
-+ uint32_t count = 0;
-+
-+ gintsts_data_t gintsts = { .d32 = 0 };
-+ gintmsk_data_t gintmsk = { .d32 = 0 };
-+ gotgctl_data_t gotgctl = { .d32 = 0 };
-+
-+ /*
-+ * Need to disable SOF interrupt immediately. If switching from device
-+ * to host, the PCD interrupt handler won't handle the interrupt if
-+ * host mode is already set. The HCD interrupt handler won't get
-+ * called if the HCD state is HALT. This means that the interrupt does
-+ * not get handled and Linux complains loudly.
-+ */
-+ gintmsk.b.sofintr = 1;
-+ dwc_modify_reg32(&_core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
-+
-+ DWC_DEBUGPL(DBG_CIL, " ++Connector ID Status Change Interrupt++ (%s)\n",
-+ (dwc_otg_is_host_mode(_core_if)?"Host":"Device"));
-+ gotgctl.d32 = dwc_read_reg32(&_core_if->core_global_regs->gotgctl);
-+ DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32);
-+ DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts);
-+
-+ /* B-Device connector (Device Mode) */
-+ if (gotgctl.b.conidsts) {
-+ /* Wait for switch to device mode. */
-+ while (!dwc_otg_is_device_mode(_core_if) ){
-+ DWC_PRINT("Waiting for Peripheral Mode, Mode=%s\n",
-+ (dwc_otg_is_host_mode(_core_if)?"Host":"Peripheral"));
-+ MDELAY(100);
-+ if (++count > 10000) *(uint32_t*)NULL=0;
-+ }
-+ _core_if->op_state = B_PERIPHERAL;
-+ dwc_otg_core_init(_core_if);
-+ dwc_otg_enable_global_interrupts(_core_if);
-+ pcd_start( _core_if );
-+ } else {
-+ /* A-Device connector (Host Mode) */
-+ while (!dwc_otg_is_host_mode(_core_if) ) {
-+ DWC_PRINT("Waiting for Host Mode, Mode=%s\n",
-+ (dwc_otg_is_host_mode(_core_if)?"Host":"Peripheral"));
-+ MDELAY(100);
-+ if (++count > 10000) *(uint32_t*)NULL=0;
-+ }
-+ _core_if->op_state = A_HOST;
-+ /*
-+ * Initialize the Core for Host mode.
-+ */
-+ dwc_otg_core_init(_core_if);
-+ dwc_otg_enable_global_interrupts(_core_if);
-+ hcd_start( _core_if );
-+ }
-+
-+ /* Set flag and clear interrupt */
-+ gintsts.b.conidstschng = 1;
-+ dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates that a device is initiating the Session
-+ * Request Protocol to request the host to turn on bus power so a new
-+ * session can begin. The handler responds by turning on bus power. If
-+ * the DWC_otg controller is in low power mode, the handler brings the
-+ * controller out of low power mode before turning on bus power.
-+ *
-+ * @param _core_if Programming view of DWC_otg controller.
-+ */
-+int32_t dwc_otg_handle_session_req_intr( dwc_otg_core_if_t *_core_if )
-+{
-+#ifndef DWC_HOST_ONLY // winder
-+ hprt0_data_t hprt0;
-+#endif
-+ gintsts_data_t gintsts;
-+
-+#ifndef DWC_HOST_ONLY
-+ DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n");
-+
-+ if (dwc_otg_is_device_mode(_core_if) ) {
-+ DWC_PRINT("SRP: Device mode\n");
-+ } else {
-+ DWC_PRINT("SRP: Host mode\n");
-+
-+ /* Turn on the port power bit. */
-+ hprt0.d32 = dwc_otg_read_hprt0( _core_if );
-+ hprt0.b.prtpwr = 1;
-+ dwc_write_reg32(_core_if->host_if->hprt0, hprt0.d32);
-+
-+ /* Start the Connection timer. So a message can be displayed
-+ * if connect does not occur within 10 seconds. */
-+ hcd_session_start( _core_if );
-+ }
-+#endif
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.sessreqintr = 1;
-+ dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates that the DWC_otg controller has detected a
-+ * resume or remote wakeup sequence. If the DWC_otg controller is in
-+ * low power mode, the handler must brings the controller out of low
-+ * power mode. The controller automatically begins resume
-+ * signaling. The handler schedules a time to stop resume signaling.
-+ */
-+int32_t dwc_otg_handle_wakeup_detected_intr( dwc_otg_core_if_t *_core_if )
-+{
-+ gintsts_data_t gintsts;
-+
-+ DWC_DEBUGPL(DBG_ANY, "++Resume and Remote Wakeup Detected Interrupt++\n");
-+
-+ if (dwc_otg_is_device_mode(_core_if) ) {
-+ dctl_data_t dctl = {.d32=0};
-+ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n",
-+ dwc_read_reg32( &_core_if->dev_if->dev_global_regs->dsts));
-+#ifdef PARTIAL_POWER_DOWN
-+ if (_core_if->hwcfg4.b.power_optimiz) {
-+ pcgcctl_data_t power = {.d32=0};
-+
-+ power.d32 = dwc_read_reg32( _core_if->pcgcctl );
-+ DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n", power.d32);
-+
-+ power.b.stoppclk = 0;
-+ dwc_write_reg32( _core_if->pcgcctl, power.d32);
-+
-+ power.b.pwrclmp = 0;
-+ dwc_write_reg32( _core_if->pcgcctl, power.d32);
-+
-+ power.b.rstpdwnmodule = 0;
-+ dwc_write_reg32( _core_if->pcgcctl, power.d32);
-+ }
-+#endif
-+ /* Clear the Remote Wakeup Signalling */
-+ dctl.b.rmtwkupsig = 1;
-+ dwc_modify_reg32( &_core_if->dev_if->dev_global_regs->dctl,
-+ dctl.d32, 0 );
-+
-+ if (_core_if->pcd_cb && _core_if->pcd_cb->resume_wakeup) {
-+ _core_if->pcd_cb->resume_wakeup( _core_if->pcd_cb->p );
-+ }
-+
-+ } else {
-+ /*
-+ * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
-+ * so that OPT tests pass with all PHYs).
-+ */
-+ hprt0_data_t hprt0 = {.d32=0};
-+ pcgcctl_data_t pcgcctl = {.d32=0};
-+ /* Restart the Phy Clock */
-+ pcgcctl.b.stoppclk = 1;
-+ dwc_modify_reg32(_core_if->pcgcctl, pcgcctl.d32, 0);
-+ UDELAY(10);
-+
-+ /* Now wait for 70 ms. */
-+ hprt0.d32 = dwc_otg_read_hprt0( _core_if );
-+ DWC_DEBUGPL(DBG_ANY,"Resume: HPRT0=%0x\n", hprt0.d32);
-+ MDELAY(70);
-+ hprt0.b.prtres = 0; /* Resume */
-+ dwc_write_reg32(_core_if->host_if->hprt0, hprt0.d32);
-+ DWC_DEBUGPL(DBG_ANY,"Clear Resume: HPRT0=%0x\n", dwc_read_reg32(_core_if->host_if->hprt0));
-+ }
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.wkupintr = 1;
-+ dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates that a device has been disconnected from
-+ * the root port.
-+ */
-+int32_t dwc_otg_handle_disconnect_intr( dwc_otg_core_if_t *_core_if)
-+{
-+ gintsts_data_t gintsts;
-+
-+ DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n",
-+ (dwc_otg_is_host_mode(_core_if)?"Host":"Device"),
-+ op_state_str(_core_if));
-+
-+/** @todo Consolidate this if statement. */
-+#ifndef DWC_HOST_ONLY
-+ if (_core_if->op_state == B_HOST) {
-+ /* If in device mode Disconnect and stop the HCD, then
-+ * start the PCD. */
-+ hcd_disconnect( _core_if );
-+ pcd_start( _core_if );
-+ _core_if->op_state = B_PERIPHERAL;
-+ } else if (dwc_otg_is_device_mode(_core_if)) {
-+ gotgctl_data_t gotgctl = { .d32 = 0 };
-+ gotgctl.d32 = dwc_read_reg32(&_core_if->core_global_regs->gotgctl);
-+ if (gotgctl.b.hstsethnpen==1) {
-+ /* Do nothing, if HNP in process the OTG
-+ * interrupt "Host Negotiation Detected"
-+ * interrupt will do the mode switch.
-+ */
-+ } else if (gotgctl.b.devhnpen == 0) {
-+ /* If in device mode Disconnect and stop the HCD, then
-+ * start the PCD. */
-+ hcd_disconnect( _core_if );
-+ pcd_start( _core_if );
-+ _core_if->op_state = B_PERIPHERAL;
-+ } else {
-+ DWC_DEBUGPL(DBG_ANY,"!a_peripheral && !devhnpen\n");
-+ }
-+ } else {
-+ if (_core_if->op_state == A_HOST) {
-+ /* A-Cable still connected but device disconnected. */
-+ hcd_disconnect( _core_if );
-+ }
-+ }
-+#endif
-+/* Without OTG, we should use the disconnect function!? winder added.*/
-+#if 1 // NO OTG, so host only!!
-+ hcd_disconnect( _core_if );
-+#endif
-+
-+ gintsts.d32 = 0;
-+ gintsts.b.disconnect = 1;
-+ dwc_write_reg32 (&_core_if->core_global_regs->gintsts, gintsts.d32);
-+ return 1;
-+}
-+/**
-+ * This interrupt indicates that SUSPEND state has been detected on
-+ * the USB.
-+ *
-+ * For HNP the USB Suspend interrupt signals the change from
-+ * "a_peripheral" to "a_host".
-+ *
-+ * When power management is enabled the core will be put in low power
-+ * mode.
-+ */
-+int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t *_core_if )
-+{
-+ dsts_data_t dsts;
-+ gintsts_data_t gintsts;
-+
-+ //805141:<IFTW-fchang>.removed DWC_DEBUGPL(DBG_ANY,"USB SUSPEND\n");
-+
-+ if (dwc_otg_is_device_mode( _core_if ) ) {
-+ /* Check the Device status register to determine if the Suspend
-+ * state is active. */
-+ dsts.d32 = dwc_read_reg32( &_core_if->dev_if->dev_global_regs->dsts);
-+ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32);
-+ DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d "
-+ "HWCFG4.power Optimize=%d\n",
-+ dsts.b.suspsts, _core_if->hwcfg4.b.power_optimiz);
-+
-+
-+#ifdef PARTIAL_POWER_DOWN
-+/** @todo Add a module parameter for power management. */
-+
-+ if (dsts.b.suspsts && _core_if->hwcfg4.b.power_optimiz) {
-+ pcgcctl_data_t power = {.d32=0};
-+ DWC_DEBUGPL(DBG_CIL, "suspend\n");
-+
-+ power.b.pwrclmp = 1;
-+ dwc_write_reg32( _core_if->pcgcctl, power.d32);
-+
-+ power.b.rstpdwnmodule = 1;
-+ dwc_modify_reg32( _core_if->pcgcctl, 0, power.d32);
-+
-+ power.b.stoppclk = 1;
-+ dwc_modify_reg32( _core_if->pcgcctl, 0, power.d32);
-+
-+ } else {
-+ DWC_DEBUGPL(DBG_ANY,"disconnect?\n");
-+ }
-+#endif
-+ /* PCD callback for suspend. */
-+ pcd_suspend(_core_if);
-+ } else {
-+ if (_core_if->op_state == A_PERIPHERAL) {
-+ DWC_DEBUGPL(DBG_ANY,"a_peripheral->a_host\n");
-+ /* Clear the a_peripheral flag, back to a_host. */
-+ pcd_stop( _core_if );
-+ hcd_start( _core_if );
-+ _core_if->op_state = A_HOST;
-+ }
-+ }
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.usbsuspend = 1;
-+ dwc_write_reg32( &_core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+
-+/**
-+ * This function returns the Core Interrupt register.
-+ */
-+static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t *_core_if)
-+{
-+ gintsts_data_t gintsts;
-+ gintmsk_data_t gintmsk;
-+ gintmsk_data_t gintmsk_common = {.d32=0};
-+ gintmsk_common.b.wkupintr = 1;
-+ gintmsk_common.b.sessreqintr = 1;
-+ gintmsk_common.b.conidstschng = 1;
-+ gintmsk_common.b.otgintr = 1;
-+ gintmsk_common.b.modemismatch = 1;
-+ gintmsk_common.b.disconnect = 1;
-+ gintmsk_common.b.usbsuspend = 1;
-+ /** @todo: The port interrupt occurs while in device
-+ * mode. Added code to CIL to clear the interrupt for now!
-+ */
-+ gintmsk_common.b.portintr = 1;
-+
-+ gintsts.d32 = dwc_read_reg32(&_core_if->core_global_regs->gintsts);
-+ gintmsk.d32 = dwc_read_reg32(&_core_if->core_global_regs->gintmsk);
-+#ifdef DEBUG
-+ /* if any common interrupts set */
-+ if (gintsts.d32 & gintmsk_common.d32) {
-+ DWC_DEBUGPL(DBG_ANY, "gintsts=%08x gintmsk=%08x\n",
-+ gintsts.d32, gintmsk.d32);
-+ }
-+#endif
-+
-+ return ((gintsts.d32 & gintmsk.d32 ) & gintmsk_common.d32);
-+
-+}
-+
-+/**
-+ * Common interrupt handler.
-+ *
-+ * The common interrupts are those that occur in both Host and Device mode.
-+ * This handler handles the following interrupts:
-+ * - Mode Mismatch Interrupt
-+ * - Disconnect Interrupt
-+ * - OTG Interrupt
-+ * - Connector ID Status Change Interrupt
-+ * - Session Request Interrupt.
-+ * - Resume / Remote Wakeup Detected Interrupt.
-+ *
-+ */
-+extern int32_t dwc_otg_handle_common_intr( dwc_otg_core_if_t *_core_if )
-+{
-+ int retval = 0;
-+ gintsts_data_t gintsts;
-+
-+ gintsts.d32 = dwc_otg_read_common_intr(_core_if);
-+
-+ if (gintsts.b.modemismatch) {
-+ retval |= dwc_otg_handle_mode_mismatch_intr( _core_if );
-+ }
-+ if (gintsts.b.otgintr) {
-+ retval |= dwc_otg_handle_otg_intr( _core_if );
-+ }
-+ if (gintsts.b.conidstschng) {
-+ retval |= dwc_otg_handle_conn_id_status_change_intr( _core_if );
-+ }
-+ if (gintsts.b.disconnect) {
-+ retval |= dwc_otg_handle_disconnect_intr( _core_if );
-+ }
-+ if (gintsts.b.sessreqintr) {
-+ retval |= dwc_otg_handle_session_req_intr( _core_if );
-+ }
-+ if (gintsts.b.wkupintr) {
-+ retval |= dwc_otg_handle_wakeup_detected_intr( _core_if );
-+ }
-+ if (gintsts.b.usbsuspend) {
-+ retval |= dwc_otg_handle_usb_suspend_intr( _core_if );
-+ }
-+ if (gintsts.b.portintr && dwc_otg_is_device_mode(_core_if)) {
-+ /* The port interrupt occurs while in device mode with HPRT0
-+ * Port Enable/Disable.
-+ */
-+ gintsts.d32 = 0;
-+ gintsts.b.portintr = 1;
-+ dwc_write_reg32(&_core_if->core_global_regs->gintsts,
-+ gintsts.d32);
-+ retval |= 1;
-+
-+ }
-+ return retval;
-+}
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_driver.c
-@@ -0,0 +1,1274 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_driver.c $
-+ * $Revision: 1.1.1.1 $
-+ * $Date: 2009-04-17 06:15:34 $
-+ * $Change: 631780 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+/** @file
-+ * The dwc_otg_driver module provides the initialization and cleanup entry
-+ * points for the DWC_otg driver. This module will be dynamically installed
-+ * after Linux is booted using the insmod command. When the module is
-+ * installed, the dwc_otg_init function is called. When the module is
-+ * removed (using rmmod), the dwc_otg_cleanup function is called.
-+ *
-+ * This module also defines a data structure for the dwc_otg_driver, which is
-+ * used in conjunction with the standard ARM lm_device structure. These
-+ * structures allow the OTG driver to comply with the standard Linux driver
-+ * model in which devices and drivers are registered with a bus driver. This
-+ * has the benefit that Linux can expose attributes of the driver and device
-+ * in its special sysfs file system. Users can then read or write files in
-+ * this file system to perform diagnostics on the driver components or the
-+ * device.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/gpio.h>
-+
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/errno.h>
-+#include <linux/types.h>
-+#include <linux/stat.h> /* permission constants */
-+#include <linux/irq.h>
-+#include <asm/io.h>
-+
-+#include "dwc_otg_plat.h"
-+#include "dwc_otg_attr.h"
-+#include "dwc_otg_driver.h"
-+#include "dwc_otg_cil.h"
-+#include "dwc_otg_cil_ifx.h"
-+
-+// #include "dwc_otg_pcd.h" // device
-+#include "dwc_otg_hcd.h" // host
-+
-+#include "dwc_otg_ifx.h" // for Infineon platform specific.
-+
-+#define DWC_DRIVER_VERSION "2.60a 22-NOV-2006"
-+#define DWC_DRIVER_DESC "HS OTG USB Controller driver"
-+
-+const char dwc_driver_name[] = "dwc_otg";
-+
-+static unsigned long dwc_iomem_base = IFX_USB_IOMEM_BASE;
-+int dwc_irq = LTQ_USB_INT;
-+//int dwc_irq = 54;
-+//int dwc_irq = IFXMIPS_USB_OC_INT;
-+
-+extern int ifx_usb_hc_init(unsigned long base_addr, int irq);
-+extern void ifx_usb_hc_remove(void);
-+
-+/*-------------------------------------------------------------------------*/
-+/* Encapsulate the module parameter settings */
-+
-+static dwc_otg_core_params_t dwc_otg_module_params = {
-+ .opt = -1,
-+ .otg_cap = -1,
-+ .dma_enable = -1,
-+ .dma_burst_size = -1,
-+ .speed = -1,
-+ .host_support_fs_ls_low_power = -1,
-+ .host_ls_low_power_phy_clk = -1,
-+ .enable_dynamic_fifo = -1,
-+ .data_fifo_size = -1,
-+ .dev_rx_fifo_size = -1,
-+ .dev_nperio_tx_fifo_size = -1,
-+ .dev_perio_tx_fifo_size = /* dev_perio_tx_fifo_size_1 */ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 15 */
-+ .host_rx_fifo_size = -1,
-+ .host_nperio_tx_fifo_size = -1,
-+ .host_perio_tx_fifo_size = -1,
-+ .max_transfer_size = -1,
-+ .max_packet_count = -1,
-+ .host_channels = -1,
-+ .dev_endpoints = -1,
-+ .phy_type = -1,
-+ .phy_utmi_width = -1,
-+ .phy_ulpi_ddr = -1,
-+ .phy_ulpi_ext_vbus = -1,
-+ .i2c_enable = -1,
-+ .ulpi_fs_ls = -1,
-+ .ts_dline = -1,
-+ .en_multiple_tx_fifo = -1,
-+ .dev_tx_fifo_size = { /* dev_tx_fifo_size */
-+ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
-+ }, /* 15 */
-+ .thr_ctl = -1,
-+ .tx_thr_length = -1,
-+ .rx_thr_length = -1,
-+};
-+
-+/**
-+ * This function shows the Driver Version.
-+ */
-+static ssize_t version_show(struct device_driver *dev, char *buf)
-+{
-+ return snprintf(buf, sizeof(DWC_DRIVER_VERSION)+2,"%s\n",
-+ DWC_DRIVER_VERSION);
-+}
-+static DRIVER_ATTR(version, S_IRUGO, version_show, NULL);
-+
-+/**
-+ * Global Debug Level Mask.
-+ */
-+uint32_t g_dbg_lvl = 0xff; /* OFF */
-+
-+/**
-+ * This function shows the driver Debug Level.
-+ */
-+static ssize_t dbg_level_show(struct device_driver *_drv, char *_buf)
-+{
-+ return sprintf(_buf, "0x%0x\n", g_dbg_lvl);
-+}
-+/**
-+ * This function stores the driver Debug Level.
-+ */
-+static ssize_t dbg_level_store(struct device_driver *_drv, const char *_buf,
-+ size_t _count)
-+{
-+ g_dbg_lvl = simple_strtoul(_buf, NULL, 16);
-+ return _count;
-+}
-+static DRIVER_ATTR(debuglevel, S_IRUGO|S_IWUSR, dbg_level_show, dbg_level_store);
-+
-+/**
-+ * This function is called during module intialization to verify that
-+ * the module parameters are in a valid state.
-+ */
-+static int check_parameters(dwc_otg_core_if_t *core_if)
-+{
-+ int i;
-+ int retval = 0;
-+
-+/* Checks if the parameter is outside of its valid range of values */
-+#define DWC_OTG_PARAM_TEST(_param_,_low_,_high_) \
-+ ((dwc_otg_module_params._param_ < (_low_)) || \
-+ (dwc_otg_module_params._param_ > (_high_)))
-+
-+/* If the parameter has been set by the user, check that the parameter value is
-+ * within the value range of values. If not, report a module error. */
-+#define DWC_OTG_PARAM_ERR(_param_,_low_,_high_,_string_) \
-+ do { \
-+ if (dwc_otg_module_params._param_ != -1) { \
-+ if (DWC_OTG_PARAM_TEST(_param_,(_low_),(_high_))) { \
-+ DWC_ERROR("`%d' invalid for parameter `%s'\n", \
-+ dwc_otg_module_params._param_, _string_); \
-+ dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \
-+ retval ++; \
-+ } \
-+ } \
-+ } while (0)
-+
-+ DWC_OTG_PARAM_ERR(opt,0,1,"opt");
-+ DWC_OTG_PARAM_ERR(otg_cap,0,2,"otg_cap");
-+ DWC_OTG_PARAM_ERR(dma_enable,0,1,"dma_enable");
-+ DWC_OTG_PARAM_ERR(speed,0,1,"speed");
-+ DWC_OTG_PARAM_ERR(host_support_fs_ls_low_power,0,1,"host_support_fs_ls_low_power");
-+ DWC_OTG_PARAM_ERR(host_ls_low_power_phy_clk,0,1,"host_ls_low_power_phy_clk");
-+ DWC_OTG_PARAM_ERR(enable_dynamic_fifo,0,1,"enable_dynamic_fifo");
-+ DWC_OTG_PARAM_ERR(data_fifo_size,32,32768,"data_fifo_size");
-+ DWC_OTG_PARAM_ERR(dev_rx_fifo_size,16,32768,"dev_rx_fifo_size");
-+ DWC_OTG_PARAM_ERR(dev_nperio_tx_fifo_size,16,32768,"dev_nperio_tx_fifo_size");
-+ DWC_OTG_PARAM_ERR(host_rx_fifo_size,16,32768,"host_rx_fifo_size");
-+ DWC_OTG_PARAM_ERR(host_nperio_tx_fifo_size,16,32768,"host_nperio_tx_fifo_size");
-+ DWC_OTG_PARAM_ERR(host_perio_tx_fifo_size,16,32768,"host_perio_tx_fifo_size");
-+ DWC_OTG_PARAM_ERR(max_transfer_size,2047,524288,"max_transfer_size");
-+ DWC_OTG_PARAM_ERR(max_packet_count,15,511,"max_packet_count");
-+ DWC_OTG_PARAM_ERR(host_channels,1,16,"host_channels");
-+ DWC_OTG_PARAM_ERR(dev_endpoints,1,15,"dev_endpoints");
-+ DWC_OTG_PARAM_ERR(phy_type,0,2,"phy_type");
-+ DWC_OTG_PARAM_ERR(phy_ulpi_ddr,0,1,"phy_ulpi_ddr");
-+ DWC_OTG_PARAM_ERR(phy_ulpi_ext_vbus,0,1,"phy_ulpi_ext_vbus");
-+ DWC_OTG_PARAM_ERR(i2c_enable,0,1,"i2c_enable");
-+ DWC_OTG_PARAM_ERR(ulpi_fs_ls,0,1,"ulpi_fs_ls");
-+ DWC_OTG_PARAM_ERR(ts_dline,0,1,"ts_dline");
-+
-+ if (dwc_otg_module_params.dma_burst_size != -1) {
-+ if (DWC_OTG_PARAM_TEST(dma_burst_size,1,1) &&
-+ DWC_OTG_PARAM_TEST(dma_burst_size,4,4) &&
-+ DWC_OTG_PARAM_TEST(dma_burst_size,8,8) &&
-+ DWC_OTG_PARAM_TEST(dma_burst_size,16,16) &&
-+ DWC_OTG_PARAM_TEST(dma_burst_size,32,32) &&
-+ DWC_OTG_PARAM_TEST(dma_burst_size,64,64) &&
-+ DWC_OTG_PARAM_TEST(dma_burst_size,128,128) &&
-+ DWC_OTG_PARAM_TEST(dma_burst_size,256,256))
-+ {
-+ DWC_ERROR("`%d' invalid for parameter `dma_burst_size'\n",
-+ dwc_otg_module_params.dma_burst_size);
-+ dwc_otg_module_params.dma_burst_size = 32;
-+ retval ++;
-+ }
-+ }
-+
-+ if (dwc_otg_module_params.phy_utmi_width != -1) {
-+ if (DWC_OTG_PARAM_TEST(phy_utmi_width,8,8) &&
-+ DWC_OTG_PARAM_TEST(phy_utmi_width,16,16))
-+ {
-+ DWC_ERROR("`%d' invalid for parameter `phy_utmi_width'\n",
-+ dwc_otg_module_params.phy_utmi_width);
-+ //dwc_otg_module_params.phy_utmi_width = 16;
-+ dwc_otg_module_params.phy_utmi_width = 8;
-+ retval ++;
-+ }
-+ }
-+
-+ for (i=0; i<15; i++) {
-+ /** @todo should be like above */
-+ //DWC_OTG_PARAM_ERR(dev_perio_tx_fifo_size[i],4,768,"dev_perio_tx_fifo_size");
-+ if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) {
-+ if (DWC_OTG_PARAM_TEST(dev_perio_tx_fifo_size[i],4,768)) {
-+ DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[i], "dev_perio_tx_fifo_size", i);
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default;
-+ retval ++;
-+ }
-+ }
-+ }
-+
-+ DWC_OTG_PARAM_ERR(en_multiple_tx_fifo, 0, 1, "en_multiple_tx_fifo");
-+ for (i = 0; i < 15; i++) {
-+ /** @todo should be like above */
-+ //DWC_OTG_PARAM_ERR(dev_tx_fifo_size[i],4,768,"dev_tx_fifo_size");
-+ if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) {
-+ if (DWC_OTG_PARAM_TEST(dev_tx_fifo_size[i], 4, 768)) {
-+ DWC_ERROR("`%d' invalid for parameter `%s_%d'\n",
-+ dwc_otg_module_params.dev_tx_fifo_size[i],
-+ "dev_tx_fifo_size", i);
-+ dwc_otg_module_params.dev_tx_fifo_size[i] =
-+ dwc_param_dev_tx_fifo_size_default;
-+ retval++;
-+ }
-+ }
-+ }
-+ DWC_OTG_PARAM_ERR(thr_ctl, 0, 7, "thr_ctl");
-+ DWC_OTG_PARAM_ERR(tx_thr_length, 8, 128, "tx_thr_length");
-+ DWC_OTG_PARAM_ERR(rx_thr_length, 8, 128, "rx_thr_length");
-+
-+ /* At this point, all module parameters that have been set by the user
-+ * are valid, and those that have not are left unset. Now set their
-+ * default values and/or check the parameters against the hardware
-+ * configurations of the OTG core. */
-+
-+
-+
-+/* This sets the parameter to the default value if it has not been set by the
-+ * user */
-+#define DWC_OTG_PARAM_SET_DEFAULT(_param_) \
-+ ({ \
-+ int changed = 1; \
-+ if (dwc_otg_module_params._param_ == -1) { \
-+ changed = 0; \
-+ dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \
-+ } \
-+ changed; \
-+ })
-+
-+/* This checks the macro agains the hardware configuration to see if it is
-+ * valid. It is possible that the default value could be invalid. In this
-+ * case, it will report a module error if the user touched the parameter.
-+ * Otherwise it will adjust the value without any error. */
-+#define DWC_OTG_PARAM_CHECK_VALID(_param_,_str_,_is_valid_,_set_valid_) \
-+ ({ \
-+ int changed = DWC_OTG_PARAM_SET_DEFAULT(_param_); \
-+ int error = 0; \
-+ if (!(_is_valid_)) { \
-+ if (changed) { \
-+ DWC_ERROR("`%d' invalid for parameter `%s'. Check HW configuration.\n", dwc_otg_module_params._param_,_str_); \
-+ error = 1; \
-+ } \
-+ dwc_otg_module_params._param_ = (_set_valid_); \
-+ } \
-+ error; \
-+ })
-+
-+ /* OTG Cap */
-+ retval += DWC_OTG_PARAM_CHECK_VALID(otg_cap,"otg_cap",
-+ ({
-+ int valid;
-+ valid = 1;
-+ switch (dwc_otg_module_params.otg_cap) {
-+ case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE:
-+ if (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) valid = 0;
-+ break;
-+ case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE:
-+ if ((core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) &&
-+ (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) &&
-+ (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) &&
-+ (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST))
-+ {
-+ valid = 0;
-+ }
-+ break;
-+ case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE:
-+ /* always valid */
-+ break;
-+ }
-+ valid;
-+ }),
-+ (((core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ||
-+ (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) ||
-+ (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
-+ (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ?
-+ DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE :
-+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(dma_enable,"dma_enable",
-+ ((dwc_otg_module_params.dma_enable == 1) && (core_if->hwcfg2.b.architecture == 0)) ? 0 : 1,
-+ 0);
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(opt,"opt",
-+ 1,
-+ 0);
-+
-+ DWC_OTG_PARAM_SET_DEFAULT(dma_burst_size);
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(host_support_fs_ls_low_power,
-+ "host_support_fs_ls_low_power",
-+ 1, 0);
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(enable_dynamic_fifo,
-+ "enable_dynamic_fifo",
-+ ((dwc_otg_module_params.enable_dynamic_fifo == 0) ||
-+ (core_if->hwcfg2.b.dynamic_fifo == 1)), 0);
-+
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(data_fifo_size,
-+ "data_fifo_size",
-+ (dwc_otg_module_params.data_fifo_size <= core_if->hwcfg3.b.dfifo_depth),
-+ core_if->hwcfg3.b.dfifo_depth);
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(dev_rx_fifo_size,
-+ "dev_rx_fifo_size",
-+ (dwc_otg_module_params.dev_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)),
-+ dwc_read_reg32(&core_if->core_global_regs->grxfsiz));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(dev_nperio_tx_fifo_size,
-+ "dev_nperio_tx_fifo_size",
-+ (dwc_otg_module_params.dev_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)),
-+ (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(host_rx_fifo_size,
-+ "host_rx_fifo_size",
-+ (dwc_otg_module_params.host_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)),
-+ dwc_read_reg32(&core_if->core_global_regs->grxfsiz));
-+
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(host_nperio_tx_fifo_size,
-+ "host_nperio_tx_fifo_size",
-+ (dwc_otg_module_params.host_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)),
-+ (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(host_perio_tx_fifo_size,
-+ "host_perio_tx_fifo_size",
-+ (dwc_otg_module_params.host_perio_tx_fifo_size <= ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16))),
-+ ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16)));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(max_transfer_size,
-+ "max_transfer_size",
-+ (dwc_otg_module_params.max_transfer_size < (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))),
-+ ((1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(max_packet_count,
-+ "max_packet_count",
-+ (dwc_otg_module_params.max_packet_count < (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))),
-+ ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(host_channels,
-+ "host_channels",
-+ (dwc_otg_module_params.host_channels <= (core_if->hwcfg2.b.num_host_chan + 1)),
-+ (core_if->hwcfg2.b.num_host_chan + 1));
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(dev_endpoints,
-+ "dev_endpoints",
-+ (dwc_otg_module_params.dev_endpoints <= (core_if->hwcfg2.b.num_dev_ep)),
-+ core_if->hwcfg2.b.num_dev_ep);
-+
-+/*
-+ * Define the following to disable the FS PHY Hardware checking. This is for
-+ * internal testing only.
-+ *
-+ * #define NO_FS_PHY_HW_CHECKS
-+ */
-+
-+#ifdef NO_FS_PHY_HW_CHECKS
-+ retval += DWC_OTG_PARAM_CHECK_VALID(phy_type,
-+ "phy_type", 1, 0);
-+#else
-+ retval += DWC_OTG_PARAM_CHECK_VALID(phy_type,
-+ "phy_type",
-+ ({
-+ int valid = 0;
-+ if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_UTMI) &&
-+ ((core_if->hwcfg2.b.hs_phy_type == 1) ||
-+ (core_if->hwcfg2.b.hs_phy_type == 3)))
-+ {
-+ valid = 1;
-+ }
-+ else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_ULPI) &&
-+ ((core_if->hwcfg2.b.hs_phy_type == 2) ||
-+ (core_if->hwcfg2.b.hs_phy_type == 3)))
-+ {
-+ valid = 1;
-+ }
-+ else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) &&
-+ (core_if->hwcfg2.b.fs_phy_type == 1))
-+ {
-+ valid = 1;
-+ }
-+ valid;
-+ }),
-+ ({
-+ int set = DWC_PHY_TYPE_PARAM_FS;
-+ if (core_if->hwcfg2.b.hs_phy_type) {
-+ if ((core_if->hwcfg2.b.hs_phy_type == 3) ||
-+ (core_if->hwcfg2.b.hs_phy_type == 1)) {
-+ set = DWC_PHY_TYPE_PARAM_UTMI;
-+ }
-+ else {
-+ set = DWC_PHY_TYPE_PARAM_ULPI;
-+ }
-+ }
-+ set;
-+ }));
-+#endif
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(speed,"speed",
-+ (dwc_otg_module_params.speed == 0) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1,
-+ dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS ? 1 : 0);
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(host_ls_low_power_phy_clk,
-+ "host_ls_low_power_phy_clk",
-+ ((dwc_otg_module_params.host_ls_low_power_phy_clk == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1),
-+ ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ : DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ));
-+
-+ DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ddr);
-+ DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ext_vbus);
-+ DWC_OTG_PARAM_SET_DEFAULT(phy_utmi_width);
-+ DWC_OTG_PARAM_SET_DEFAULT(ulpi_fs_ls);
-+ DWC_OTG_PARAM_SET_DEFAULT(ts_dline);
-+
-+#ifdef NO_FS_PHY_HW_CHECKS
-+ retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable,
-+ "i2c_enable", 1, 0);
-+#else
-+ retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable,
-+ "i2c_enable",
-+ (dwc_otg_module_params.i2c_enable == 1) && (core_if->hwcfg3.b.i2c == 0) ? 0 : 1,
-+ 0);
-+#endif
-+
-+ for (i=0; i<16; i++) {
-+
-+ int changed = 1;
-+ int error = 0;
-+
-+ if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] == -1) {
-+ changed = 0;
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default;
-+ }
-+ if (!(dwc_otg_module_params.dev_perio_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) {
-+ if (changed) {
-+ DWC_ERROR("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_perio_tx_fifo_size[i],i);
-+ error = 1;
-+ }
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]);
-+ }
-+ retval += error;
-+ }
-+
-+ retval += DWC_OTG_PARAM_CHECK_VALID(en_multiple_tx_fifo,
-+ "en_multiple_tx_fifo",
-+ ((dwc_otg_module_params.en_multiple_tx_fifo == 1) &&
-+ (core_if->hwcfg4.b.ded_fifo_en == 0)) ? 0 : 1, 0);
-+
-+ for (i = 0; i < 16; i++) {
-+ int changed = 1;
-+ int error = 0;
-+ if (dwc_otg_module_params.dev_tx_fifo_size[i] == -1) {
-+ changed = 0;
-+ dwc_otg_module_params.dev_tx_fifo_size[i] =
-+ dwc_param_dev_tx_fifo_size_default;
-+ }
-+ if (!(dwc_otg_module_params.dev_tx_fifo_size[i] <=
-+ (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) {
-+ if (changed) {
-+ DWC_ERROR("%d' invalid for parameter `dev_perio_fifo_size_%d'."
-+ "Check HW configuration.\n",dwc_otg_module_params.dev_tx_fifo_size[i],i);
-+ error = 1;
-+ }
-+ dwc_otg_module_params.dev_tx_fifo_size[i] =
-+ dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]);
-+ }
-+ retval += error;
-+ }
-+ DWC_OTG_PARAM_SET_DEFAULT(thr_ctl);
-+ DWC_OTG_PARAM_SET_DEFAULT(tx_thr_length);
-+ DWC_OTG_PARAM_SET_DEFAULT(rx_thr_length);
-+ return retval;
-+} // check_parameters
-+
-+
-+/**
-+ * This function is the top level interrupt handler for the Common
-+ * (Device and host modes) interrupts.
-+ */
-+static irqreturn_t dwc_otg_common_irq(int _irq, void *_dev)
-+{
-+ dwc_otg_device_t *otg_dev = _dev;
-+ int32_t retval = IRQ_NONE;
-+
-+ retval = dwc_otg_handle_common_intr( otg_dev->core_if );
-+
-+ mask_and_ack_ifx_irq (_irq);
-+
-+ return IRQ_RETVAL(retval);
-+}
-+
-+
-+/**
-+ * This function is called when a DWC_OTG device is unregistered with the
-+ * dwc_otg_driver. This happens, for example, when the rmmod command is
-+ * executed. The device may or may not be electrically present. If it is
-+ * present, the driver stops device processing. Any resources used on behalf
-+ * of this device are freed.
-+ *
-+ * @return
-+ */
-+static int
-+dwc_otg_driver_remove(struct platform_device *_dev)
-+{
-+ //dwc_otg_device_t *otg_dev = dev_get_drvdata(&_dev->dev);
-+ dwc_otg_device_t *otg_dev = platform_get_drvdata(_dev);
-+
-+ DWC_DEBUGPL(DBG_ANY, "%s(%p)\n", __func__, _dev);
-+
-+ if (otg_dev == NULL) {
-+ /* Memory allocation for the dwc_otg_device failed. */
-+ return 0;
-+ }
-+
-+ /*
-+ * Free the IRQ
-+ */
-+ if (otg_dev->common_irq_installed) {
-+ free_irq( otg_dev->irq, otg_dev );
-+ }
-+
-+#ifndef DWC_DEVICE_ONLY
-+ if (otg_dev->hcd != NULL) {
-+ dwc_otg_hcd_remove(&_dev->dev);
-+ }
-+#endif
-+ printk("after removehcd\n");
-+
-+// Note: Integrate HOST and DEVICE(Gadget) is not planned yet.
-+#ifndef DWC_HOST_ONLY
-+ if (otg_dev->pcd != NULL) {
-+ dwc_otg_pcd_remove(otg_dev);
-+ }
-+#endif
-+ if (otg_dev->core_if != NULL) {
-+ dwc_otg_cil_remove( otg_dev->core_if );
-+ }
-+ printk("after removecil\n");
-+
-+ /*
-+ * Remove the device attributes
-+ */
-+ dwc_otg_attr_remove(&_dev->dev);
-+ printk("after removeattr\n");
-+
-+ /*
-+ * Return the memory.
-+ */
-+ if (otg_dev->base != NULL) {
-+ iounmap(otg_dev->base);
-+ }
-+ if (otg_dev->phys_addr != 0) {
-+ release_mem_region(otg_dev->phys_addr, otg_dev->base_len);
-+ }
-+ kfree(otg_dev);
-+
-+ /*
-+ * Clear the drvdata pointer.
-+ */
-+ //dev_set_drvdata(&_dev->dev, 0);
-+ platform_set_drvdata(_dev, 0);
-+ return 0;
-+}
-+
-+/**
-+ * This function is called when an DWC_OTG device is bound to a
-+ * dwc_otg_driver. It creates the driver components required to
-+ * control the device (CIL, HCD, and PCD) and it initializes the
-+ * device. The driver components are stored in a dwc_otg_device
-+ * structure. A reference to the dwc_otg_device is saved in the
-+ * lm_device. This allows the driver to access the dwc_otg_device
-+ * structure on subsequent calls to driver methods for this device.
-+ *
-+ * @return
-+ */
-+static int __devinit
-+dwc_otg_driver_probe(struct platform_device *_dev)
-+{
-+ int retval = 0;
-+ dwc_otg_device_t *dwc_otg_device;
-+ int pin = (int)_dev->dev.platform_data;
-+ int32_t snpsid;
-+ struct resource *res;
-+ gusbcfg_data_t usbcfg = {.d32 = 0};
-+
-+ // GPIOs
-+ if(pin >= 0)
-+ {
-+ gpio_request(pin, "usb_power");
-+ gpio_direction_output(pin, 1);
-+ gpio_set_value(pin, 1);
-+ gpio_export(pin, 0);
-+ }
-+ dev_dbg(&_dev->dev, "dwc_otg_driver_probe (%p)\n", _dev);
-+
-+ dwc_otg_device = kmalloc(sizeof(dwc_otg_device_t), GFP_KERNEL);
-+ if (dwc_otg_device == 0) {
-+ dev_err(&_dev->dev, "kmalloc of dwc_otg_device failed\n");
-+ retval = -ENOMEM;
-+ goto fail;
-+ }
-+ memset(dwc_otg_device, 0, sizeof(*dwc_otg_device));
-+ dwc_otg_device->reg_offset = 0xFFFFFFFF;
-+
-+ /*
-+ * Retrieve the memory and IRQ resources.
-+ */
-+ dwc_otg_device->irq = platform_get_irq(_dev, 0);
-+ if (dwc_otg_device->irq == 0) {
-+ dev_err(&_dev->dev, "no device irq\n");
-+ retval = -ENODEV;
-+ goto fail;
-+ }
-+ dev_dbg(&_dev->dev, "OTG - device irq: %d\n", dwc_otg_device->irq);
-+ res = platform_get_resource(_dev, IORESOURCE_MEM, 0);
-+ if (res == NULL) {
-+ dev_err(&_dev->dev, "no CSR address\n");
-+ retval = -ENODEV;
-+ goto fail;
-+ }
-+ dev_dbg(&_dev->dev, "OTG - ioresource_mem start0x%08x: end:0x%08x\n",
-+ (unsigned)res->start, (unsigned)res->end);
-+ dwc_otg_device->phys_addr = res->start;
-+ dwc_otg_device->base_len = res->end - res->start + 1;
-+ if (request_mem_region(dwc_otg_device->phys_addr, dwc_otg_device->base_len,
-+ dwc_driver_name) == NULL) {
-+ dev_err(&_dev->dev, "request_mem_region failed\n");
-+ retval = -EBUSY;
-+ goto fail;
-+ }
-+
-+ /*
-+ * Map the DWC_otg Core memory into virtual address space.
-+ */
-+ dwc_otg_device->base = ioremap_nocache(dwc_otg_device->phys_addr, dwc_otg_device->base_len);
-+ if (dwc_otg_device->base == NULL) {
-+ dev_err(&_dev->dev, "ioremap() failed\n");
-+ retval = -ENOMEM;
-+ goto fail;
-+ }
-+ dev_dbg(&_dev->dev, "mapped base=0x%08x\n", (unsigned)dwc_otg_device->base);
-+
-+ /*
-+ * Attempt to ensure this device is really a DWC_otg Controller.
-+ * Read and verify the SNPSID register contents. The value should be
-+ * 0x45F42XXX, which corresponds to "OT2", as in "OTG version 2.XX".
-+ */
-+ snpsid = dwc_read_reg32((uint32_t *)((uint8_t *)dwc_otg_device->base + 0x40));
-+ if ((snpsid & 0xFFFFF000) != 0x4F542000) {
-+ dev_err(&_dev->dev, "Bad value for SNPSID: 0x%08x\n", snpsid);
-+ retval = -EINVAL;
-+ goto fail;
-+ }
-+
-+ /*
-+ * Initialize driver data to point to the global DWC_otg
-+ * Device structure.
-+ */
-+ platform_set_drvdata(_dev, dwc_otg_device);
-+ dev_dbg(&_dev->dev, "dwc_otg_device=0x%p\n", dwc_otg_device);
-+ dwc_otg_device->core_if = dwc_otg_cil_init( dwc_otg_device->base, &dwc_otg_module_params);
-+ if (dwc_otg_device->core_if == 0) {
-+ dev_err(&_dev->dev, "CIL initialization failed!\n");
-+ retval = -ENOMEM;
-+ goto fail;
-+ }
-+
-+ /*
-+ * Validate parameter values.
-+ */
-+ if (check_parameters(dwc_otg_device->core_if) != 0) {
-+ retval = -EINVAL;
-+ goto fail;
-+ }
-+
-+ /* Added for PLB DMA phys virt mapping */
-+ //dwc_otg_device->core_if->phys_addr = dwc_otg_device->phys_addr;
-+ /*
-+ * Create Device Attributes in sysfs
-+ */
-+ dwc_otg_attr_create (&_dev->dev);
-+
-+ /*
-+ * Disable the global interrupt until all the interrupt
-+ * handlers are installed.
-+ */
-+ dwc_otg_disable_global_interrupts( dwc_otg_device->core_if );
-+ /*
-+ * Install the interrupt handler for the common interrupts before
-+ * enabling common interrupts in core_init below.
-+ */
-+ DWC_DEBUGPL( DBG_CIL, "registering (common) handler for irq%d\n", dwc_otg_device->irq);
-+
-+ retval = request_irq((unsigned int)dwc_otg_device->irq, dwc_otg_common_irq,
-+ //SA_INTERRUPT|SA_SHIRQ, "dwc_otg", (void *)dwc_otg_device );
-+ IRQF_SHARED, "dwc_otg", (void *)dwc_otg_device );
-+ //IRQF_DISABLED, "dwc_otg", (void *)dwc_otg_device );
-+ if (retval != 0) {
-+ DWC_ERROR("request of irq%d failed retval: %d\n", dwc_otg_device->irq, retval);
-+ retval = -EBUSY;
-+ goto fail;
-+ } else {
-+ dwc_otg_device->common_irq_installed = 1;
-+ }
-+
-+ /*
-+ * Initialize the DWC_otg core.
-+ */
-+ dwc_otg_core_init( dwc_otg_device->core_if );
-+
-+
-+#ifndef DWC_HOST_ONLY // otg device mode. (gadget.)
-+ /*
-+ * Initialize the PCD
-+ */
-+ retval = dwc_otg_pcd_init(dwc_otg_device);
-+ if (retval != 0) {
-+ DWC_ERROR("dwc_otg_pcd_init failed\n");
-+ dwc_otg_device->pcd = NULL;
-+ goto fail;
-+ }
-+#endif // DWC_HOST_ONLY
-+
-+#ifndef DWC_DEVICE_ONLY // otg host mode. (HCD)
-+ /*
-+ * Initialize the HCD
-+ */
-+#if 1 /*fscz*/
-+ /* force_host_mode */
-+ usbcfg.d32 = dwc_read_reg32(&dwc_otg_device->core_if->core_global_regs ->gusbcfg);
-+ usbcfg.b.force_host_mode = 1;
-+ dwc_write_reg32(&dwc_otg_device->core_if->core_global_regs ->gusbcfg, usbcfg.d32);
-+#endif
-+ retval = dwc_otg_hcd_init(&_dev->dev, dwc_otg_device);
-+ if (retval != 0) {
-+ DWC_ERROR("dwc_otg_hcd_init failed\n");
-+ dwc_otg_device->hcd = NULL;
-+ goto fail;
-+ }
-+#endif // DWC_DEVICE_ONLY
-+
-+ /*
-+ * Enable the global interrupt after all the interrupt
-+ * handlers are installed.
-+ */
-+ dwc_otg_enable_global_interrupts( dwc_otg_device->core_if );
-+#if 0 /*fscz*/
-+ usbcfg.d32 = dwc_read_reg32(&dwc_otg_device->core_if->core_global_regs ->gusbcfg);
-+ usbcfg.b.force_host_mode = 0;
-+ dwc_write_reg32(&dwc_otg_device->core_if->core_global_regs ->gusbcfg, usbcfg.d32);
-+#endif
-+
-+
-+ return 0;
-+
-+fail:
-+ dwc_otg_driver_remove(_dev);
-+ return retval;
-+}
-+
-+/**
-+ * This structure defines the methods to be called by a bus driver
-+ * during the lifecycle of a device on that bus. Both drivers and
-+ * devices are registered with a bus driver. The bus driver matches
-+ * devices to drivers based on information in the device and driver
-+ * structures.
-+ *
-+ * The probe function is called when the bus driver matches a device
-+ * to this driver. The remove function is called when a device is
-+ * unregistered with the bus driver.
-+ */
-+struct platform_driver dwc_otg_driver = {
-+ .probe = dwc_otg_driver_probe,
-+ .remove = dwc_otg_driver_remove,
-+// .suspend = dwc_otg_driver_suspend,
-+// .resume = dwc_otg_driver_resume,
-+ .driver = {
-+ .name = dwc_driver_name,
-+ .owner = THIS_MODULE,
-+ },
-+};
-+EXPORT_SYMBOL(dwc_otg_driver);
-+
-+/**
-+ * This function is called when the dwc_otg_driver is installed with the
-+ * insmod command. It registers the dwc_otg_driver structure with the
-+ * appropriate bus driver. This will cause the dwc_otg_driver_probe function
-+ * to be called. In addition, the bus driver will automatically expose
-+ * attributes defined for the device and driver in the special sysfs file
-+ * system.
-+ *
-+ * @return
-+ */
-+static int __init dwc_otg_init(void)
-+{
-+ int retval = 0;
-+
-+ printk(KERN_INFO "%s: version %s\n", dwc_driver_name, DWC_DRIVER_VERSION);
-+
-+ // ifxmips setup
-+ retval = ifx_usb_hc_init(dwc_iomem_base, dwc_irq);
-+ if (retval < 0)
-+ {
-+ printk(KERN_ERR "%s retval=%d\n", __func__, retval);
-+ return retval;
-+ }
-+ dwc_otg_power_on(); // ifx only!!
-+
-+
-+ retval = platform_driver_register(&dwc_otg_driver);
-+
-+ if (retval < 0) {
-+ printk(KERN_ERR "%s retval=%d\n", __func__, retval);
-+ goto error1;
-+ }
-+
-+ retval = driver_create_file(&dwc_otg_driver.driver, &driver_attr_version);
-+ if (retval < 0)
-+ {
-+ printk(KERN_ERR "%s retval=%d\n", __func__, retval);
-+ goto error2;
-+ }
-+ retval = driver_create_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
-+ if (retval < 0)
-+ {
-+ printk(KERN_ERR "%s retval=%d\n", __func__, retval);
-+ goto error3;
-+ }
-+ return retval;
-+
-+
-+error3:
-+ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version);
-+error2:
-+ driver_unregister(&dwc_otg_driver.driver);
-+error1:
-+ ifx_usb_hc_remove();
-+ return retval;
-+}
-+module_init(dwc_otg_init);
-+
-+/**
-+ * This function is called when the driver is removed from the kernel
-+ * with the rmmod command. The driver unregisters itself with its bus
-+ * driver.
-+ *
-+ */
-+static void __exit dwc_otg_cleanup(void)
-+{
-+ printk(KERN_DEBUG "dwc_otg_cleanup()\n");
-+
-+ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
-+ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version);
-+
-+ platform_driver_unregister(&dwc_otg_driver);
-+ ifx_usb_hc_remove();
-+
-+ printk(KERN_INFO "%s module removed\n", dwc_driver_name);
-+}
-+module_exit(dwc_otg_cleanup);
-+
-+MODULE_DESCRIPTION(DWC_DRIVER_DESC);
-+MODULE_AUTHOR("Synopsys Inc.");
-+MODULE_LICENSE("GPL");
-+
-+module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444);
-+MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None");
-+module_param_named(opt, dwc_otg_module_params.opt, int, 0444);
-+MODULE_PARM_DESC(opt, "OPT Mode");
-+module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444);
-+MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled");
-+module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int, 0444);
-+MODULE_PARM_DESC(dma_burst_size, "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256");
-+module_param_named(speed, dwc_otg_module_params.speed, int, 0444);
-+MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed");
-+module_param_named(host_support_fs_ls_low_power, dwc_otg_module_params.host_support_fs_ls_low_power, int, 0444);
-+MODULE_PARM_DESC(host_support_fs_ls_low_power, "Support Low Power w/FS or LS 0=Support 1=Don't Support");
-+module_param_named(host_ls_low_power_phy_clk, dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444);
-+MODULE_PARM_DESC(host_ls_low_power_phy_clk, "Low Speed Low Power Clock 0=48Mhz 1=6Mhz");
-+module_param_named(enable_dynamic_fifo, dwc_otg_module_params.enable_dynamic_fifo, int, 0444);
-+MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing");
-+module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int, 0444);
-+MODULE_PARM_DESC(data_fifo_size, "Total number of words in the data FIFO memory 32-32768");
-+module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size, int, 0444);
-+MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
-+module_param_named(dev_nperio_tx_fifo_size, dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444);
-+MODULE_PARM_DESC(dev_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
-+module_param_named(dev_perio_tx_fifo_size_1, dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_1, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_2, dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_2, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_3, dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_3, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_4, dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_4, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_5, dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_5, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_6, dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_6, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_7, dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_7, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_8, dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_8, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_9, dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_9, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_10, dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_10, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_11, dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_11, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_12, dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_12, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_13, dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_13, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_14, dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_14, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_15, dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_15, "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size, int, 0444);
-+MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
-+module_param_named(host_nperio_tx_fifo_size, dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444);
-+MODULE_PARM_DESC(host_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
-+module_param_named(host_perio_tx_fifo_size, dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444);
-+MODULE_PARM_DESC(host_perio_tx_fifo_size, "Number of words in the host periodic Tx FIFO 16-32768");
-+module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size, int, 0444);
-+/** @todo Set the max to 512K, modify checks */
-+MODULE_PARM_DESC(max_transfer_size, "The maximum transfer size supported in bytes 2047-65535");
-+module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count, int, 0444);
-+MODULE_PARM_DESC(max_packet_count, "The maximum number of packets in a transfer 15-511");
-+module_param_named(host_channels, dwc_otg_module_params.host_channels, int, 0444);
-+MODULE_PARM_DESC(host_channels, "The number of host channel registers to use 1-16");
-+module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int, 0444);
-+MODULE_PARM_DESC(dev_endpoints, "The number of endpoints in addition to EP0 available for device mode 1-15");
-+module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444);
-+MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI");
-+module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int, 0444);
-+MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits");
-+module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444);
-+MODULE_PARM_DESC(phy_ulpi_ddr, "ULPI at double or single data rate 0=Single 1=Double");
-+module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus, int, 0444);
-+MODULE_PARM_DESC(phy_ulpi_ext_vbus, "ULPI PHY using internal or external vbus 0=Internal");
-+module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444);
-+MODULE_PARM_DESC(i2c_enable, "FS PHY Interface");
-+module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444);
-+MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only");
-+module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444);
-+MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs");
-+module_param_named(debug, g_dbg_lvl, int, 0444);
-+MODULE_PARM_DESC(debug, "0");
-+module_param_named(en_multiple_tx_fifo,
-+ dwc_otg_module_params.en_multiple_tx_fifo, int, 0444);
-+MODULE_PARM_DESC(en_multiple_tx_fifo,
-+ "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled");
-+module_param_named(dev_tx_fifo_size_1,
-+ dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_2,
-+ dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_3,
-+ dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_4,
-+ dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_5,
-+ dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_6,
-+ dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_7,
-+ dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_8,
-+ dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_9,
-+ dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_10,
-+ dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_11,
-+ dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_12,
-+ dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_13,
-+ dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_14,
-+ dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_15,
-+ dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768");
-+module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444);
-+MODULE_PARM_DESC(thr_ctl, "Thresholding enable flag bit"
-+ "0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled");
-+module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int, 0444);
-+MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs");
-+module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int, 0444);
-+MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs");
-+module_param_named (iomem_base, dwc_iomem_base, ulong, 0444);
-+MODULE_PARM_DESC (dwc_iomem_base, "The base address of the DWC_OTG register.");
-+module_param_named (irq, dwc_irq, int, 0444);
-+MODULE_PARM_DESC (dwc_irq, "The interrupt number");
-+
-+/** @page "Module Parameters"
-+ *
-+ * The following parameters may be specified when starting the module.
-+ * These parameters define how the DWC_otg controller should be
-+ * configured. Parameter values are passed to the CIL initialization
-+ * function dwc_otg_cil_init
-+ *
-+ * Example: <code>modprobe dwc_otg speed=1 otg_cap=1</code>
-+ *
-+
-+ <table>
-+ <tr><td>Parameter Name</td><td>Meaning</td></tr>
-+
-+ <tr>
-+ <td>otg_cap</td>
-+ <td>Specifies the OTG capabilities. The driver will automatically detect the
-+ value for this parameter if none is specified.
-+ - 0: HNP and SRP capable (default, if available)
-+ - 1: SRP Only capable
-+ - 2: No HNP/SRP capable
-+ </td></tr>
-+
-+ <tr>
-+ <td>dma_enable</td>
-+ <td>Specifies whether to use slave or DMA mode for accessing the data FIFOs.
-+ The driver will automatically detect the value for this parameter if none is
-+ specified.
-+ - 0: Slave
-+ - 1: DMA (default, if available)
-+ </td></tr>
-+
-+ <tr>
-+ <td>dma_burst_size</td>
-+ <td>The DMA Burst size (applicable only for External DMA Mode).
-+ - Values: 1, 4, 8 16, 32, 64, 128, 256 (default 32)
-+ </td></tr>
-+
-+ <tr>
-+ <td>speed</td>
-+ <td>Specifies the maximum speed of operation in host and device mode. The
-+ actual speed depends on the speed of the attached device and the value of
-+ phy_type.
-+ - 0: High Speed (default)
-+ - 1: Full Speed
-+ </td></tr>
-+
-+ <tr>
-+ <td>host_support_fs_ls_low_power</td>
-+ <td>Specifies whether low power mode is supported when attached to a Full
-+ Speed or Low Speed device in host mode.
-+ - 0: Don't support low power mode (default)
-+ - 1: Support low power mode
-+ </td></tr>
-+
-+ <tr>
-+ <td>host_ls_low_power_phy_clk</td>
-+ <td>Specifies the PHY clock rate in low power mode when connected to a Low
-+ Speed device in host mode. This parameter is applicable only if
-+ HOST_SUPPORT_FS_LS_LOW_POWER is enabled.
-+ - 0: 48 MHz (default)
-+ - 1: 6 MHz
-+ </td></tr>
-+
-+ <tr>
-+ <td>enable_dynamic_fifo</td>
-+ <td> Specifies whether FIFOs may be resized by the driver software.
-+ - 0: Use cC FIFO size parameters
-+ - 1: Allow dynamic FIFO sizing (default)
-+ </td></tr>
-+
-+ <tr>
-+ <td>data_fifo_size</td>
-+ <td>Total number of 4-byte words in the data FIFO memory. This memory
-+ includes the Rx FIFO, non-periodic Tx FIFO, and periodic Tx FIFOs.
-+ - Values: 32 to 32768 (default 8192)
-+
-+ Note: The total FIFO memory depth in the FPGA configuration is 8192.
-+ </td></tr>
-+
-+ <tr>
-+ <td>dev_rx_fifo_size</td>
-+ <td>Number of 4-byte words in the Rx FIFO in device mode when dynamic
-+ FIFO sizing is enabled.
-+ - Values: 16 to 32768 (default 1064)
-+ </td></tr>
-+
-+ <tr>
-+ <td>dev_nperio_tx_fifo_size</td>
-+ <td>Number of 4-byte words in the non-periodic Tx FIFO in device mode when
-+ dynamic FIFO sizing is enabled.
-+ - Values: 16 to 32768 (default 1024)
-+ </td></tr>
-+
-+ <tr>
-+ <td>dev_perio_tx_fifo_size_n (n = 1 to 15)</td>
-+ <td>Number of 4-byte words in each of the periodic Tx FIFOs in device mode
-+ when dynamic FIFO sizing is enabled.
-+ - Values: 4 to 768 (default 256)
-+ </td></tr>
-+
-+ <tr>
-+ <td>host_rx_fifo_size</td>
-+ <td>Number of 4-byte words in the Rx FIFO in host mode when dynamic FIFO
-+ sizing is enabled.
-+ - Values: 16 to 32768 (default 1024)
-+ </td></tr>
-+
-+ <tr>
-+ <td>host_nperio_tx_fifo_size</td>
-+ <td>Number of 4-byte words in the non-periodic Tx FIFO in host mode when
-+ dynamic FIFO sizing is enabled in the core.
-+ - Values: 16 to 32768 (default 1024)
-+ </td></tr>
-+
-+ <tr>
-+ <td>host_perio_tx_fifo_size</td>
-+ <td>Number of 4-byte words in the host periodic Tx FIFO when dynamic FIFO
-+ sizing is enabled.
-+ - Values: 16 to 32768 (default 1024)
-+ </td></tr>
-+
-+ <tr>
-+ <td>max_transfer_size</td>
-+ <td>The maximum transfer size supported in bytes.
-+ - Values: 2047 to 65,535 (default 65,535)
-+ </td></tr>
-+
-+ <tr>
-+ <td>max_packet_count</td>
-+ <td>The maximum number of packets in a transfer.
-+ - Values: 15 to 511 (default 511)
-+ </td></tr>
-+
-+ <tr>
-+ <td>host_channels</td>
-+ <td>The number of host channel registers to use.
-+ - Values: 1 to 16 (default 12)
-+
-+ Note: The FPGA configuration supports a maximum of 12 host channels.
-+ </td></tr>
-+
-+ <tr>
-+ <td>dev_endpoints</td>
-+ <td>The number of endpoints in addition to EP0 available for device mode
-+ operations.
-+ - Values: 1 to 15 (default 6 IN and OUT)
-+
-+ Note: The FPGA configuration supports a maximum of 6 IN and OUT endpoints in
-+ addition to EP0.
-+ </td></tr>
-+
-+ <tr>
-+ <td>phy_type</td>
-+ <td>Specifies the type of PHY interface to use. By default, the driver will
-+ automatically detect the phy_type.
-+ - 0: Full Speed
-+ - 1: UTMI+ (default, if available)
-+ - 2: ULPI
-+ </td></tr>
-+
-+ <tr>
-+ <td>phy_utmi_width</td>
-+ <td>Specifies the UTMI+ Data Width. This parameter is applicable for a
-+ phy_type of UTMI+. Also, this parameter is applicable only if the
-+ OTG_HSPHY_WIDTH cC parameter was set to "8 and 16 bits", meaning that the
-+ core has been configured to work at either data path width.
-+ - Values: 8 or 16 bits (default 16)
-+ </td></tr>
-+
-+ <tr>
-+ <td>phy_ulpi_ddr</td>
-+ <td>Specifies whether the ULPI operates at double or single data rate. This
-+ parameter is only applicable if phy_type is ULPI.
-+ - 0: single data rate ULPI interface with 8 bit wide data bus (default)
-+ - 1: double data rate ULPI interface with 4 bit wide data bus
-+ </td></tr>
-+
-+ <tr>
-+ <td>i2c_enable</td>
-+ <td>Specifies whether to use the I2C interface for full speed PHY. This
-+ parameter is only applicable if PHY_TYPE is FS.
-+ - 0: Disabled (default)
-+ - 1: Enabled
-+ </td></tr>
-+
-+ <tr>
-+ <td>otg_en_multiple_tx_fifo</td>
-+ <td>Specifies whether dedicatedto tx fifos are enabled for non periodic IN EPs.
-+ The driver will automatically detect the value for this parameter if none is
-+ specified.
-+ - 0: Disabled
-+ - 1: Enabled (default, if available)
-+ </td></tr>
-+
-+ <tr>
-+ <td>dev_tx_fifo_size_n (n = 1 to 15)</td>
-+ <td>Number of 4-byte words in each of the Tx FIFOs in device mode
-+ when dynamic FIFO sizing is enabled.
-+ - Values: 4 to 768 (default 256)
-+ </td></tr>
-+
-+*/
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_driver.h
-@@ -0,0 +1,84 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_driver.h $
-+ * $Revision: 1.1.1.1 $
-+ * $Date: 2009-04-17 06:15:34 $
-+ * $Change: 510275 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+#if !defined(__DWC_OTG_DRIVER_H__)
-+#define __DWC_OTG_DRIVER_H__
-+
-+/** @file
-+ * This file contains the interface to the Linux driver.
-+ */
-+#include "dwc_otg_cil.h"
-+
-+/* Type declarations */
-+struct dwc_otg_pcd;
-+struct dwc_otg_hcd;
-+
-+/**
-+ * This structure is a wrapper that encapsulates the driver components used to
-+ * manage a single DWC_otg controller.
-+ */
-+typedef struct dwc_otg_device
-+{
-+ /** Base address returned from ioremap() */
-+ void *base;
-+
-+ /** Pointer to the core interface structure. */
-+ dwc_otg_core_if_t *core_if;
-+
-+ /** Register offset for Diagnostic API.*/
-+ uint32_t reg_offset;
-+
-+ /** Pointer to the PCD structure. */
-+ struct dwc_otg_pcd *pcd;
-+
-+ /** Pointer to the HCD structure. */
-+ struct dwc_otg_hcd *hcd;
-+
-+ /** Flag to indicate whether the common IRQ handler is installed. */
-+ uint8_t common_irq_installed;
-+
-+ /** Interrupt request number. */
-+ unsigned int irq;
-+
-+ /** Physical address of Control and Status registers, used by
-+ * release_mem_region().
-+ */
-+ resource_size_t phys_addr;
-+
-+ /** Length of memory region, used by release_mem_region(). */
-+ unsigned long base_len;
-+} dwc_otg_device_t;
-+
-+//#define dev_dbg(fake, format, arg...) printk(KERN_CRIT __FILE__ ":%d: " format "\n" , __LINE__, ## arg)
-+
-+#endif
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_hcd.c
-@@ -0,0 +1,2870 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd.c $
-+ * $Revision: 1.1.1.1 $
-+ * $Date: 2009-04-17 06:15:34 $
-+ * $Change: 631780 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_DEVICE_ONLY
-+
-+/**
-+ * @file
-+ *
-+ * This file contains the implementation of the HCD. In Linux, the HCD
-+ * implements the hc_driver API.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+
-+#include <linux/device.h>
-+
-+#include <linux/errno.h>
-+#include <linux/list.h>
-+#include <linux/interrupt.h>
-+#include <linux/string.h>
-+
-+#include <linux/dma-mapping.h>
-+
-+#include "dwc_otg_driver.h"
-+#include "dwc_otg_hcd.h"
-+#include "dwc_otg_regs.h"
-+
-+#include <asm/irq.h>
-+#include "dwc_otg_ifx.h" // for Infineon platform specific.
-+extern atomic_t release_later;
-+
-+static u64 dma_mask = DMA_BIT_MASK(32);
-+
-+static const char dwc_otg_hcd_name [] = "dwc_otg_hcd";
-+static const struct hc_driver dwc_otg_hc_driver =
-+{
-+ .description = dwc_otg_hcd_name,
-+ .product_desc = "DWC OTG Controller",
-+ .hcd_priv_size = sizeof(dwc_otg_hcd_t),
-+ .irq = dwc_otg_hcd_irq,
-+ .flags = HCD_MEMORY | HCD_USB2,
-+ //.reset =
-+ .start = dwc_otg_hcd_start,
-+ //.suspend =
-+ //.resume =
-+ .stop = dwc_otg_hcd_stop,
-+ .urb_enqueue = dwc_otg_hcd_urb_enqueue,
-+ .urb_dequeue = dwc_otg_hcd_urb_dequeue,
-+ .endpoint_disable = dwc_otg_hcd_endpoint_disable,
-+ .get_frame_number = dwc_otg_hcd_get_frame_number,
-+ .hub_status_data = dwc_otg_hcd_hub_status_data,
-+ .hub_control = dwc_otg_hcd_hub_control,
-+ //.hub_suspend =
-+ //.hub_resume =
-+};
-+
-+
-+/**
-+ * Work queue function for starting the HCD when A-Cable is connected.
-+ * The dwc_otg_hcd_start() must be called in a process context.
-+ */
-+static void hcd_start_func(struct work_struct *work)
-+{
-+ struct dwc_otg_hcd *priv =
-+ container_of(work, struct dwc_otg_hcd, start_work);
-+ struct usb_hcd *usb_hcd = (struct usb_hcd *)priv->_p;
-+ DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, usb_hcd);
-+ if (usb_hcd) {
-+ dwc_otg_hcd_start(usb_hcd);
-+ }
-+}
-+
-+
-+/**
-+ * HCD Callback function for starting the HCD when A-Cable is
-+ * connected.
-+ *
-+ * @param _p void pointer to the <code>struct usb_hcd</code>
-+ */
-+static int32_t dwc_otg_hcd_start_cb(void *_p)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_p);
-+ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
-+ hprt0_data_t hprt0;
-+ if (core_if->op_state == B_HOST) {
-+ /*
-+ * Reset the port. During a HNP mode switch the reset
-+ * needs to occur within 1ms and have a duration of at
-+ * least 50ms.
-+ */
-+ hprt0.d32 = dwc_otg_read_hprt0 (core_if);
-+ hprt0.b.prtrst = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ ((struct usb_hcd *)_p)->self.is_b_host = 1;
-+ } else {
-+ ((struct usb_hcd *)_p)->self.is_b_host = 0;
-+ }
-+ /* Need to start the HCD in a non-interrupt context. */
-+ INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func);
-+ dwc_otg_hcd->_p = _p;
-+ schedule_work(&dwc_otg_hcd->start_work);
-+ return 1;
-+}
-+
-+
-+/**
-+ * HCD Callback function for stopping the HCD.
-+ *
-+ * @param _p void pointer to the <code>struct usb_hcd</code>
-+ */
-+static int32_t dwc_otg_hcd_stop_cb( void *_p )
-+{
-+ struct usb_hcd *usb_hcd = (struct usb_hcd *)_p;
-+ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p);
-+ dwc_otg_hcd_stop( usb_hcd );
-+ return 1;
-+}
-+static void del_xfer_timers(dwc_otg_hcd_t *_hcd)
-+{
-+#ifdef DEBUG
-+ int i;
-+ int num_channels = _hcd->core_if->core_params->host_channels;
-+ for (i = 0; i < num_channels; i++) {
-+ del_timer(&_hcd->core_if->hc_xfer_timer[i]);
-+ }
-+#endif /* */
-+}
-+
-+static void del_timers(dwc_otg_hcd_t *_hcd)
-+{
-+ del_xfer_timers(_hcd);
-+ del_timer(&_hcd->conn_timer);
-+}
-+
-+/**
-+ * Processes all the URBs in a single list of QHs. Completes them with
-+ * -ETIMEDOUT and frees the QTD.
-+ */
-+static void kill_urbs_in_qh_list(dwc_otg_hcd_t * _hcd,
-+ struct list_head *_qh_list)
-+{
-+ struct list_head *qh_item;
-+ dwc_otg_qh_t *qh;
-+ struct list_head *qtd_item;
-+ dwc_otg_qtd_t *qtd;
-+
-+ list_for_each(qh_item, _qh_list) {
-+ qh = list_entry(qh_item, dwc_otg_qh_t, qh_list_entry);
-+ for (qtd_item = qh->qtd_list.next; qtd_item != &qh->qtd_list;
-+ qtd_item = qh->qtd_list.next) {
-+ qtd = list_entry(qtd_item, dwc_otg_qtd_t, qtd_list_entry);
-+ if (qtd->urb != NULL) {
-+ dwc_otg_hcd_complete_urb(_hcd, qtd->urb,-ETIMEDOUT);
-+ }
-+ dwc_otg_hcd_qtd_remove_and_free(qtd);
-+ }
-+ }
-+}
-+
-+/**
-+ * Responds with an error status of ETIMEDOUT to all URBs in the non-periodic
-+ * and periodic schedules. The QTD associated with each URB is removed from
-+ * the schedule and freed. This function may be called when a disconnect is
-+ * detected or when the HCD is being stopped.
-+ */
-+static void kill_all_urbs(dwc_otg_hcd_t *_hcd)
-+{
-+ kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_deferred);
-+ kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_inactive);
-+ kill_urbs_in_qh_list(_hcd, &_hcd->non_periodic_sched_active);
-+ kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_inactive);
-+ kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_ready);
-+ kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_assigned);
-+ kill_urbs_in_qh_list(_hcd, &_hcd->periodic_sched_queued);
-+}
-+
-+/**
-+ * HCD Callback function for disconnect of the HCD.
-+ *
-+ * @param _p void pointer to the <code>struct usb_hcd</code>
-+ */
-+static int32_t dwc_otg_hcd_disconnect_cb( void *_p )
-+{
-+ gintsts_data_t intr;
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_p);
-+
-+ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p);
-+
-+ /*
-+ * Set status flags for the hub driver.
-+ */
-+ dwc_otg_hcd->flags.b.port_connect_status_change = 1;
-+ dwc_otg_hcd->flags.b.port_connect_status = 0;
-+
-+ /*
-+ * Shutdown any transfers in process by clearing the Tx FIFO Empty
-+ * interrupt mask and status bits and disabling subsequent host
-+ * channel interrupts.
-+ */
-+ intr.d32 = 0;
-+ intr.b.nptxfempty = 1;
-+ intr.b.ptxfempty = 1;
-+ intr.b.hcintr = 1;
-+ dwc_modify_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gintmsk, intr.d32, 0);
-+ dwc_modify_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gintsts, intr.d32, 0);
-+
-+ del_timers(dwc_otg_hcd);
-+
-+ /*
-+ * Turn off the vbus power only if the core has transitioned to device
-+ * mode. If still in host mode, need to keep power on to detect a
-+ * reconnection.
-+ */
-+ if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) {
-+ if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) {
-+ hprt0_data_t hprt0 = { .d32=0 };
-+ DWC_PRINT("Disconnect: PortPower off\n");
-+ hprt0.b.prtpwr = 0;
-+ dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32);
-+ }
-+
-+ dwc_otg_disable_host_interrupts( dwc_otg_hcd->core_if );
-+ }
-+
-+ /* Respond with an error status to all URBs in the schedule. */
-+ kill_all_urbs(dwc_otg_hcd);
-+
-+ if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) {
-+ /* Clean up any host channels that were in use. */
-+ int num_channels;
-+ int i;
-+ dwc_hc_t *channel;
-+ dwc_otg_hc_regs_t *hc_regs;
-+ hcchar_data_t hcchar;
-+
-+ num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
-+
-+ if (!dwc_otg_hcd->core_if->dma_enable) {
-+ /* Flush out any channel requests in slave mode. */
-+ for (i = 0; i < num_channels; i++) {
-+ channel = dwc_otg_hcd->hc_ptr_array[i];
-+ if (list_empty(&channel->hc_list_entry)) {
-+ hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i];
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (hcchar.b.chen) {
-+ hcchar.b.chen = 0;
-+ hcchar.b.chdis = 1;
-+ hcchar.b.epdir = 0;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+ }
-+ }
-+ }
-+ }
-+
-+ for (i = 0; i < num_channels; i++) {
-+ channel = dwc_otg_hcd->hc_ptr_array[i];
-+ if (list_empty(&channel->hc_list_entry)) {
-+ hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i];
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (hcchar.b.chen) {
-+ /* Halt the channel. */
-+ hcchar.b.chdis = 1;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+ }
-+
-+ dwc_otg_hc_cleanup(dwc_otg_hcd->core_if, channel);
-+ list_add_tail(&channel->hc_list_entry,
-+ &dwc_otg_hcd->free_hc_list);
-+ }
-+ }
-+ }
-+
-+ /* A disconnect will end the session so the B-Device is no
-+ * longer a B-host. */
-+ ((struct usb_hcd *)_p)->self.is_b_host = 0;
-+
-+ return 1;
-+}
-+
-+/**
-+ * Connection timeout function. An OTG host is required to display a
-+ * message if the device does not connect within 10 seconds.
-+ */
-+void dwc_otg_hcd_connect_timeout( unsigned long _ptr )
-+{
-+ DWC_DEBUGPL(DBG_HCDV, "%s(%x)\n", __func__, (int)_ptr);
-+ DWC_PRINT( "Connect Timeout\n");
-+ DWC_ERROR( "Device Not Connected/Responding\n" );
-+}
-+
-+/**
-+ * Start the connection timer. An OTG host is required to display a
-+ * message if the device does not connect within 10 seconds. The
-+ * timer is deleted if a port connect interrupt occurs before the
-+ * timer expires.
-+ */
-+static void dwc_otg_hcd_start_connect_timer( dwc_otg_hcd_t *_hcd)
-+{
-+ init_timer( &_hcd->conn_timer );
-+ _hcd->conn_timer.function = dwc_otg_hcd_connect_timeout;
-+ _hcd->conn_timer.data = (unsigned long)0;
-+ _hcd->conn_timer.expires = jiffies + (HZ*10);
-+ add_timer( &_hcd->conn_timer );
-+}
-+
-+/**
-+ * HCD Callback function for disconnect of the HCD.
-+ *
-+ * @param _p void pointer to the <code>struct usb_hcd</code>
-+ */
-+static int32_t dwc_otg_hcd_session_start_cb( void *_p )
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_p);
-+ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _p);
-+ dwc_otg_hcd_start_connect_timer( dwc_otg_hcd );
-+ return 1;
-+}
-+
-+/**
-+ * HCD Callback structure for handling mode switching.
-+ */
-+static dwc_otg_cil_callbacks_t hcd_cil_callbacks = {
-+ .start = dwc_otg_hcd_start_cb,
-+ .stop = dwc_otg_hcd_stop_cb,
-+ .disconnect = dwc_otg_hcd_disconnect_cb,
-+ .session_start = dwc_otg_hcd_session_start_cb,
-+ .p = 0,
-+};
-+
-+
-+/**
-+ * Reset tasklet function
-+ */
-+static void reset_tasklet_func (unsigned long data)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t*)data;
-+ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
-+ hprt0_data_t hprt0;
-+
-+ DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n");
-+
-+ hprt0.d32 = dwc_otg_read_hprt0 (core_if);
-+ hprt0.b.prtrst = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ mdelay (60);
-+
-+ hprt0.b.prtrst = 0;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ dwc_otg_hcd->flags.b.port_reset_change = 1;
-+
-+ return;
-+}
-+
-+static struct tasklet_struct reset_tasklet = {
-+ .next = NULL,
-+ .state = 0,
-+ .count = ATOMIC_INIT(0),
-+ .func = reset_tasklet_func,
-+ .data = 0,
-+};
-+
-+/**
-+ * Initializes the HCD. This function allocates memory for and initializes the
-+ * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the
-+ * USB bus with the core and calls the hc_driver->start() function. It returns
-+ * a negative error on failure.
-+ */
-+int init_hcd_usecs(dwc_otg_hcd_t *_hcd);
-+
-+int __devinit dwc_otg_hcd_init(struct device *_dev, dwc_otg_device_t * dwc_otg_device)
-+{
-+ struct usb_hcd *hcd = NULL;
-+ dwc_otg_hcd_t *dwc_otg_hcd = NULL;
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+
-+ int num_channels;
-+ int i;
-+ dwc_hc_t *channel;
-+
-+ int retval = 0;
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT\n");
-+
-+ /*
-+ * Allocate memory for the base HCD plus the DWC OTG HCD.
-+ * Initialize the base HCD.
-+ */
-+ hcd = usb_create_hcd(&dwc_otg_hc_driver, _dev, dev_name(_dev));
-+ if (hcd == NULL) {
-+ retval = -ENOMEM;
-+ goto error1;
-+ }
-+ dev_set_drvdata(_dev, dwc_otg_device); /* fscz restore */
-+ hcd->regs = otg_dev->base;
-+ hcd->rsrc_start = (int)otg_dev->base;
-+
-+ hcd->self.otg_port = 1;
-+
-+ /* Initialize the DWC OTG HCD. */
-+ dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+ dwc_otg_hcd->core_if = otg_dev->core_if;
-+ otg_dev->hcd = dwc_otg_hcd;
-+
-+ /* Register the HCD CIL Callbacks */
-+ dwc_otg_cil_register_hcd_callbacks(otg_dev->core_if,
-+ &hcd_cil_callbacks, hcd);
-+
-+ /* Initialize the non-periodic schedule. */
-+ INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_inactive);
-+ INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_active);
-+ INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_deferred);
-+
-+ /* Initialize the periodic schedule. */
-+ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_inactive);
-+ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_ready);
-+ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_assigned);
-+ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_queued);
-+
-+ /*
-+ * Create a host channel descriptor for each host channel implemented
-+ * in the controller. Initialize the channel descriptor array.
-+ */
-+ INIT_LIST_HEAD(&dwc_otg_hcd->free_hc_list);
-+ num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
-+ for (i = 0; i < num_channels; i++) {
-+ channel = kmalloc(sizeof(dwc_hc_t), GFP_KERNEL);
-+ if (channel == NULL) {
-+ retval = -ENOMEM;
-+ DWC_ERROR("%s: host channel allocation failed\n", __func__);
-+ goto error2;
-+ }
-+ memset(channel, 0, sizeof(dwc_hc_t));
-+ channel->hc_num = i;
-+ dwc_otg_hcd->hc_ptr_array[i] = channel;
-+#ifdef DEBUG
-+ init_timer(&dwc_otg_hcd->core_if->hc_xfer_timer[i]);
-+#endif
-+
-+ DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i, channel);
-+ }
-+
-+ /* Initialize the Connection timeout timer. */
-+ init_timer( &dwc_otg_hcd->conn_timer );
-+
-+ /* Initialize reset tasklet. */
-+ reset_tasklet.data = (unsigned long) dwc_otg_hcd;
-+ dwc_otg_hcd->reset_tasklet = &reset_tasklet;
-+
-+ /* Set device flags indicating whether the HCD supports DMA. */
-+ if (otg_dev->core_if->dma_enable) {
-+ DWC_PRINT("Using DMA mode\n");
-+ //_dev->dma_mask = (void *)~0;
-+ //_dev->coherent_dma_mask = ~0;
-+ _dev->dma_mask = &dma_mask;
-+ _dev->coherent_dma_mask = DMA_BIT_MASK(32);
-+ } else {
-+ DWC_PRINT("Using Slave mode\n");
-+ _dev->dma_mask = (void *)0;
-+ _dev->coherent_dma_mask = 0;
-+ }
-+
-+ init_hcd_usecs(dwc_otg_hcd);
-+ /*
-+ * Finish generic HCD initialization and start the HCD. This function
-+ * allocates the DMA buffer pool, registers the USB bus, requests the
-+ * IRQ line, and calls dwc_otg_hcd_start method.
-+ */
-+ retval = usb_add_hcd(hcd, otg_dev->irq, IRQF_SHARED);
-+ if (retval < 0) {
-+ goto error2;
-+ }
-+
-+ /*
-+ * Allocate space for storing data on status transactions. Normally no
-+ * data is sent, but this space acts as a bit bucket. This must be
-+ * done after usb_add_hcd since that function allocates the DMA buffer
-+ * pool.
-+ */
-+ if (otg_dev->core_if->dma_enable) {
-+ dwc_otg_hcd->status_buf =
-+ dma_alloc_coherent(_dev,
-+ DWC_OTG_HCD_STATUS_BUF_SIZE,
-+ &dwc_otg_hcd->status_buf_dma,
-+ GFP_KERNEL | GFP_DMA);
-+ } else {
-+ dwc_otg_hcd->status_buf = kmalloc(DWC_OTG_HCD_STATUS_BUF_SIZE,
-+ GFP_KERNEL);
-+ }
-+ if (dwc_otg_hcd->status_buf == NULL) {
-+ retval = -ENOMEM;
-+ DWC_ERROR("%s: status_buf allocation failed\n", __func__);
-+ goto error3;
-+ }
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Initialized HCD, bus=%s, usbbus=%d\n",
-+ dev_name(_dev), hcd->self.busnum);
-+
-+ return 0;
-+
-+ /* Error conditions */
-+error3:
-+ usb_remove_hcd(hcd);
-+error2:
-+ dwc_otg_hcd_free(hcd);
-+ usb_put_hcd(hcd);
-+error1:
-+ return retval;
-+}
-+
-+/**
-+ * Removes the HCD.
-+ * Frees memory and resources associated with the HCD and deregisters the bus.
-+ */
-+void dwc_otg_hcd_remove(struct device *_dev)
-+{
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);
-+ dwc_otg_hcd_t *dwc_otg_hcd = otg_dev->hcd;
-+ struct usb_hcd *hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd);
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE\n");
-+
-+ /* Turn off all interrupts */
-+ dwc_write_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0);
-+ dwc_modify_reg32 (&dwc_otg_hcd->core_if->core_global_regs->gahbcfg, 1, 0);
-+
-+ usb_remove_hcd(hcd);
-+
-+ dwc_otg_hcd_free(hcd);
-+
-+ usb_put_hcd(hcd);
-+
-+ return;
-+}
-+
-+
-+/* =========================================================================
-+ * Linux HC Driver Functions
-+ * ========================================================================= */
-+
-+/**
-+ * Initializes dynamic portions of the DWC_otg HCD state.
-+ */
-+static void hcd_reinit(dwc_otg_hcd_t *_hcd)
-+{
-+ struct list_head *item;
-+ int num_channels;
-+ int i;
-+ dwc_hc_t *channel;
-+
-+ _hcd->flags.d32 = 0;
-+
-+ _hcd->non_periodic_qh_ptr = &_hcd->non_periodic_sched_active;
-+ _hcd->available_host_channels = _hcd->core_if->core_params->host_channels;
-+
-+ /*
-+ * Put all channels in the free channel list and clean up channel
-+ * states.
-+ */
-+ item = _hcd->free_hc_list.next;
-+ while (item != &_hcd->free_hc_list) {
-+ list_del(item);
-+ item = _hcd->free_hc_list.next;
-+ }
-+ num_channels = _hcd->core_if->core_params->host_channels;
-+ for (i = 0; i < num_channels; i++) {
-+ channel = _hcd->hc_ptr_array[i];
-+ list_add_tail(&channel->hc_list_entry, &_hcd->free_hc_list);
-+ dwc_otg_hc_cleanup(_hcd->core_if, channel);
-+ }
-+
-+ /* Initialize the DWC core for host mode operation. */
-+ dwc_otg_core_host_init(_hcd->core_if);
-+}
-+
-+/** Initializes the DWC_otg controller and its root hub and prepares it for host
-+ * mode operation. Activates the root port. Returns 0 on success and a negative
-+ * error code on failure. */
-+int dwc_otg_hcd_start(struct usb_hcd *_hcd)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
-+ dwc_otg_core_if_t * core_if = dwc_otg_hcd->core_if;
-+ struct usb_bus *bus;
-+
-+ // int retval;
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n");
-+
-+ bus = hcd_to_bus(_hcd);
-+
-+ /* Initialize the bus state. If the core is in Device Mode
-+ * HALT the USB bus and return. */
-+ if (dwc_otg_is_device_mode (core_if)) {
-+ _hcd->state = HC_STATE_HALT;
-+ return 0;
-+ }
-+ _hcd->state = HC_STATE_RUNNING;
-+
-+ /* Initialize and connect root hub if one is not already attached */
-+ if (bus->root_hub) {
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n");
-+ /* Inform the HUB driver to resume. */
-+ usb_hcd_resume_root_hub(_hcd);
-+ }
-+ else {
-+#if 0
-+ struct usb_device *udev;
-+ udev = usb_alloc_dev(NULL, bus, 0);
-+ if (!udev) {
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error udev alloc\n");
-+ return -ENODEV;
-+ }
-+ udev->speed = USB_SPEED_HIGH;
-+ /* Not needed - VJ
-+ if ((retval = usb_hcd_register_root_hub(udev, _hcd)) != 0) {
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error registering %d\n", retval);
-+ return -ENODEV;
-+ }
-+ */
-+#else
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error udev alloc\n");
-+#endif
-+ }
-+
-+ hcd_reinit(dwc_otg_hcd);
-+
-+ return 0;
-+}
-+
-+static void qh_list_free(dwc_otg_hcd_t *_hcd, struct list_head *_qh_list)
-+{
-+ struct list_head *item;
-+ dwc_otg_qh_t *qh;
-+
-+ if (_qh_list->next == NULL) {
-+ /* The list hasn't been initialized yet. */
-+ return;
-+ }
-+
-+ /* Ensure there are no QTDs or URBs left. */
-+ kill_urbs_in_qh_list(_hcd, _qh_list);
-+
-+ for (item = _qh_list->next; item != _qh_list; item = _qh_list->next) {
-+ qh = list_entry(item, dwc_otg_qh_t, qh_list_entry);
-+ dwc_otg_hcd_qh_remove_and_free(_hcd, qh);
-+ }
-+}
-+
-+/**
-+ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
-+ * stopped.
-+ */
-+void dwc_otg_hcd_stop(struct usb_hcd *_hcd)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
-+ hprt0_data_t hprt0 = { .d32=0 };
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n");
-+
-+ /* Turn off all host-specific interrupts. */
-+ dwc_otg_disable_host_interrupts( dwc_otg_hcd->core_if );
-+
-+ /*
-+ * The root hub should be disconnected before this function is called.
-+ * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue)
-+ * and the QH lists (via ..._hcd_endpoint_disable).
-+ */
-+
-+ /* Turn off the vbus power */
-+ DWC_PRINT("PortPower off\n");
-+ hprt0.b.prtpwr = 0;
-+ dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32);
-+
-+ return;
-+}
-+
-+
-+/** Returns the current frame number. */
-+int dwc_otg_hcd_get_frame_number(struct usb_hcd *_hcd)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd);
-+ hfnum_data_t hfnum;
-+
-+ hfnum.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if->
-+ host_if->host_global_regs->hfnum);
-+
-+#ifdef DEBUG_SOF
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n", hfnum.b.frnum);
-+#endif
-+ return hfnum.b.frnum;
-+}
-+
-+/**
-+ * Frees secondary storage associated with the dwc_otg_hcd structure contained
-+ * in the struct usb_hcd field.
-+ */
-+void dwc_otg_hcd_free(struct usb_hcd *_hcd)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd);
-+ int i;
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n");
-+
-+ del_timers(dwc_otg_hcd);
-+
-+ /* Free memory for QH/QTD lists */
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive);
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_deferred);
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active);
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive);
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready);
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned);
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued);
-+
-+ /* Free memory for the host channels. */
-+ for (i = 0; i < MAX_EPS_CHANNELS; i++) {
-+ dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i];
-+ if (hc != NULL) {
-+ DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n", i, hc);
-+ kfree(hc);
-+ }
-+ }
-+
-+ if (dwc_otg_hcd->core_if->dma_enable) {
-+ if (dwc_otg_hcd->status_buf_dma) {
-+ dma_free_coherent(_hcd->self.controller,
-+ DWC_OTG_HCD_STATUS_BUF_SIZE,
-+ dwc_otg_hcd->status_buf,
-+ dwc_otg_hcd->status_buf_dma);
-+ }
-+ } else if (dwc_otg_hcd->status_buf != NULL) {
-+ kfree(dwc_otg_hcd->status_buf);
-+ }
-+
-+ return;
-+}
-+
-+
-+#ifdef DEBUG
-+static void dump_urb_info(struct urb *_urb, char* _fn_name)
-+{
-+ DWC_PRINT("%s, urb %p\n", _fn_name, _urb);
-+ DWC_PRINT(" Device address: %d\n", usb_pipedevice(_urb->pipe));
-+ DWC_PRINT(" Endpoint: %d, %s\n", usb_pipeendpoint(_urb->pipe),
-+ (usb_pipein(_urb->pipe) ? "IN" : "OUT"));
-+ DWC_PRINT(" Endpoint type: %s\n",
-+ ({char *pipetype;
-+ switch (usb_pipetype(_urb->pipe)) {
-+ case PIPE_CONTROL: pipetype = "CONTROL"; break;
-+ case PIPE_BULK: pipetype = "BULK"; break;
-+ case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
-+ case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
-+ default: pipetype = "UNKNOWN"; break;
-+ }; pipetype;}));
-+ DWC_PRINT(" Speed: %s\n",
-+ ({char *speed;
-+ switch (_urb->dev->speed) {
-+ case USB_SPEED_HIGH: speed = "HIGH"; break;
-+ case USB_SPEED_FULL: speed = "FULL"; break;
-+ case USB_SPEED_LOW: speed = "LOW"; break;
-+ default: speed = "UNKNOWN"; break;
-+ }; speed;}));
-+ DWC_PRINT(" Max packet size: %d\n",
-+ usb_maxpacket(_urb->dev, _urb->pipe, usb_pipeout(_urb->pipe)));
-+ DWC_PRINT(" Data buffer length: %d\n", _urb->transfer_buffer_length);
-+ DWC_PRINT(" Transfer buffer: %p, Transfer DMA: %p\n",
-+ _urb->transfer_buffer, (void *)_urb->transfer_dma);
-+ DWC_PRINT(" Setup buffer: %p, Setup DMA: %p\n",
-+ _urb->setup_packet, (void *)_urb->setup_dma);
-+ DWC_PRINT(" Interval: %d\n", _urb->interval);
-+ if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS) {
-+ int i;
-+ for (i = 0; i < _urb->number_of_packets; i++) {
-+ DWC_PRINT(" ISO Desc %d:\n", i);
-+ DWC_PRINT(" offset: %d, length %d\n",
-+ _urb->iso_frame_desc[i].offset,
-+ _urb->iso_frame_desc[i].length);
-+ }
-+ }
-+}
-+
-+static void dump_channel_info(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *qh)
-+{
-+ if (qh->channel != NULL) {
-+ dwc_hc_t *hc = qh->channel;
-+ struct list_head *item;
-+ dwc_otg_qh_t *qh_item;
-+ int num_channels = _hcd->core_if->core_params->host_channels;
-+ int i;
-+
-+ dwc_otg_hc_regs_t *hc_regs;
-+ hcchar_data_t hcchar;
-+ hcsplt_data_t hcsplt;
-+ hctsiz_data_t hctsiz;
-+ uint32_t hcdma;
-+
-+ hc_regs = _hcd->core_if->host_if->hc_regs[hc->hc_num];
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt);
-+ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz);
-+ hcdma = dwc_read_reg32(&hc_regs->hcdma);
-+
-+ DWC_PRINT(" Assigned to channel %p:\n", hc);
-+ DWC_PRINT(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
-+ DWC_PRINT(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
-+ DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
-+ hc->dev_addr, hc->ep_num, hc->ep_is_in);
-+ DWC_PRINT(" ep_type: %d\n", hc->ep_type);
-+ DWC_PRINT(" max_packet: %d\n", hc->max_packet);
-+ DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start);
-+ DWC_PRINT(" xfer_started: %d\n", hc->xfer_started);
-+ DWC_PRINT(" halt_status: %d\n", hc->halt_status);
-+ DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff);
-+ DWC_PRINT(" xfer_len: %d\n", hc->xfer_len);
-+ DWC_PRINT(" qh: %p\n", hc->qh);
-+ DWC_PRINT(" NP inactive sched:\n");
-+ list_for_each(item, &_hcd->non_periodic_sched_inactive) {
-+ qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
-+ DWC_PRINT(" %p\n", qh_item);
-+ } DWC_PRINT(" NP active sched:\n");
-+ list_for_each(item, &_hcd->non_periodic_sched_deferred) {
-+ qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
-+ DWC_PRINT(" %p\n", qh_item);
-+ } DWC_PRINT(" NP deferred sched:\n");
-+ list_for_each(item, &_hcd->non_periodic_sched_active) {
-+ qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry);
-+ DWC_PRINT(" %p\n", qh_item);
-+ } DWC_PRINT(" Channels: \n");
-+ for (i = 0; i < num_channels; i++) {
-+ dwc_hc_t *hc = _hcd->hc_ptr_array[i];
-+ DWC_PRINT(" %2d: %p\n", i, hc);
-+ }
-+ }
-+}
-+#endif // DEBUG
-+
-+/** Starts processing a USB transfer request specified by a USB Request Block
-+ * (URB). mem_flags indicates the type of memory allocation to use while
-+ * processing this URB. */
-+int dwc_otg_hcd_urb_enqueue(struct usb_hcd *_hcd,
-+ struct urb *_urb,
-+ gfp_t _mem_flags)
-+{
-+ unsigned long flags;
-+ int retval;
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
-+ dwc_otg_qtd_t *qtd;
-+
-+ local_irq_save(flags);
-+ retval = usb_hcd_link_urb_to_ep(_hcd, _urb);
-+ if (retval) {
-+ local_irq_restore(flags);
-+ return retval;
-+ }
-+#ifdef DEBUG
-+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
-+ dump_urb_info(_urb, "dwc_otg_hcd_urb_enqueue");
-+ }
-+#endif // DEBUG
-+ if (!dwc_otg_hcd->flags.b.port_connect_status) {
-+ /* No longer connected. */
-+ local_irq_restore(flags);
-+ return -ENODEV;
-+ }
-+
-+ qtd = dwc_otg_hcd_qtd_create (_urb);
-+ if (qtd == NULL) {
-+ local_irq_restore(flags);
-+ DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n");
-+ return -ENOMEM;
-+ }
-+
-+ retval = dwc_otg_hcd_qtd_add (qtd, dwc_otg_hcd);
-+ if (retval < 0) {
-+ DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. "
-+ "Error status %d\n", retval);
-+ dwc_otg_hcd_qtd_free(qtd);
-+ }
-+
-+ local_irq_restore (flags);
-+ return retval;
-+}
-+
-+/** Aborts/cancels a USB transfer request. Always returns 0 to indicate
-+ * success. */
-+int dwc_otg_hcd_urb_dequeue(struct usb_hcd *_hcd, struct urb *_urb, int _status)
-+{
-+ unsigned long flags;
-+ dwc_otg_hcd_t *dwc_otg_hcd;
-+ dwc_otg_qtd_t *urb_qtd;
-+ dwc_otg_qh_t *qh;
-+ int retval;
-+ //struct usb_host_endpoint *_ep = NULL;
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n");
-+
-+ local_irq_save(flags);
-+
-+ retval = usb_hcd_check_unlink_urb(_hcd, _urb, _status);
-+ if (retval) {
-+ local_irq_restore(flags);
-+ return retval;
-+ }
-+
-+ dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd);
-+ urb_qtd = (dwc_otg_qtd_t *)_urb->hcpriv;
-+ if (urb_qtd == NULL) {
-+ printk("urb_qtd is NULL for _urb %08x\n",(unsigned)_urb);
-+ goto done;
-+ }
-+ qh = (dwc_otg_qh_t *) urb_qtd->qtd_qh_ptr;
-+ if (qh == NULL) {
-+ goto done;
-+ }
-+
-+#ifdef DEBUG
-+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
-+ dump_urb_info(_urb, "dwc_otg_hcd_urb_dequeue");
-+ if (urb_qtd == qh->qtd_in_process) {
-+ dump_channel_info(dwc_otg_hcd, qh);
-+ }
-+ }
-+#endif // DEBUG
-+
-+ if (urb_qtd == qh->qtd_in_process) {
-+ /* The QTD is in process (it has been assigned to a channel). */
-+
-+ if (dwc_otg_hcd->flags.b.port_connect_status) {
-+ /*
-+ * If still connected (i.e. in host mode), halt the
-+ * channel so it can be used for other transfers. If
-+ * no longer connected, the host registers can't be
-+ * written to halt the channel since the core is in
-+ * device mode.
-+ */
-+ dwc_otg_hc_halt(dwc_otg_hcd->core_if, qh->channel,
-+ DWC_OTG_HC_XFER_URB_DEQUEUE);
-+ }
-+ }
-+
-+ /*
-+ * Free the QTD and clean up the associated QH. Leave the QH in the
-+ * schedule if it has any remaining QTDs.
-+ */
-+ dwc_otg_hcd_qtd_remove_and_free(urb_qtd);
-+ if (urb_qtd == qh->qtd_in_process) {
-+ dwc_otg_hcd_qh_deactivate(dwc_otg_hcd, qh, 0);
-+ qh->channel = NULL;
-+ qh->qtd_in_process = NULL;
-+ } else if (list_empty(&qh->qtd_list)) {
-+ dwc_otg_hcd_qh_remove(dwc_otg_hcd, qh);
-+ }
-+
-+done:
-+ local_irq_restore(flags);
-+ _urb->hcpriv = NULL;
-+
-+ /* Higher layer software sets URB status. */
-+ usb_hcd_unlink_urb_from_ep(_hcd, _urb);
-+ usb_hcd_giveback_urb(_hcd, _urb, _status);
-+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
-+ DWC_PRINT("Called usb_hcd_giveback_urb()\n");
-+ DWC_PRINT(" urb->status = %d\n", _urb->status);
-+ }
-+
-+ return 0;
-+}
-+
-+
-+/** Frees resources in the DWC_otg controller related to a given endpoint. Also
-+ * clears state in the HCD related to the endpoint. Any URBs for the endpoint
-+ * must already be dequeued. */
-+void dwc_otg_hcd_endpoint_disable(struct usb_hcd *_hcd,
-+ struct usb_host_endpoint *_ep)
-+
-+{
-+ dwc_otg_qh_t *qh;
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(_hcd);
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, "
-+ "endpoint=%d\n", _ep->desc.bEndpointAddress,
-+ dwc_ep_addr_to_endpoint(_ep->desc.bEndpointAddress));
-+
-+ qh = (dwc_otg_qh_t *)(_ep->hcpriv);
-+ if (qh != NULL) {
-+#ifdef DEBUG
-+ /** Check that the QTD list is really empty */
-+ if (!list_empty(&qh->qtd_list)) {
-+ DWC_WARN("DWC OTG HCD EP DISABLE:"
-+ " QTD List for this endpoint is not empty\n");
-+ }
-+#endif // DEBUG
-+
-+ dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh);
-+ _ep->hcpriv = NULL;
-+ }
-+
-+ return;
-+}
-+extern int dwc_irq;
-+/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if
-+ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
-+ * interrupt.
-+ *
-+ * This function is called by the USB core when an interrupt occurs */
-+irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *_hcd)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
-+
-+ mask_and_ack_ifx_irq (dwc_irq);
-+ return IRQ_RETVAL(dwc_otg_hcd_handle_intr(dwc_otg_hcd));
-+}
-+
-+/** Creates Status Change bitmap for the root hub and root port. The bitmap is
-+ * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
-+ * is the status change indicator for the single root port. Returns 1 if either
-+ * change indicator is 1, otherwise returns 0. */
-+int dwc_otg_hcd_hub_status_data(struct usb_hcd *_hcd, char *_buf)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
-+
-+ _buf[0] = 0;
-+ _buf[0] |= (dwc_otg_hcd->flags.b.port_connect_status_change ||
-+ dwc_otg_hcd->flags.b.port_reset_change ||
-+ dwc_otg_hcd->flags.b.port_enable_change ||
-+ dwc_otg_hcd->flags.b.port_suspend_change ||
-+ dwc_otg_hcd->flags.b.port_over_current_change) << 1;
-+
-+#ifdef DEBUG
-+ if (_buf[0]) {
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:"
-+ " Root port status changed\n");
-+ DWC_DEBUGPL(DBG_HCDV, " port_connect_status_change: %d\n",
-+ dwc_otg_hcd->flags.b.port_connect_status_change);
-+ DWC_DEBUGPL(DBG_HCDV, " port_reset_change: %d\n",
-+ dwc_otg_hcd->flags.b.port_reset_change);
-+ DWC_DEBUGPL(DBG_HCDV, " port_enable_change: %d\n",
-+ dwc_otg_hcd->flags.b.port_enable_change);
-+ DWC_DEBUGPL(DBG_HCDV, " port_suspend_change: %d\n",
-+ dwc_otg_hcd->flags.b.port_suspend_change);
-+ DWC_DEBUGPL(DBG_HCDV, " port_over_current_change: %d\n",
-+ dwc_otg_hcd->flags.b.port_over_current_change);
-+ }
-+#endif // DEBUG
-+ return (_buf[0] != 0);
-+}
-+
-+#ifdef DWC_HS_ELECT_TST
-+/*
-+ * Quick and dirty hack to implement the HS Electrical Test
-+ * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature.
-+ *
-+ * This code was copied from our userspace app "hset". It sends a
-+ * Get Device Descriptor control sequence in two parts, first the
-+ * Setup packet by itself, followed some time later by the In and
-+ * Ack packets. Rather than trying to figure out how to add this
-+ * functionality to the normal driver code, we just hijack the
-+ * hardware, using these two function to drive the hardware
-+ * directly.
-+ */
-+
-+dwc_otg_core_global_regs_t *global_regs;
-+dwc_otg_host_global_regs_t *hc_global_regs;
-+dwc_otg_hc_regs_t *hc_regs;
-+uint32_t *data_fifo;
-+
-+static void do_setup(void)
-+{
-+ gintsts_data_t gintsts;
-+ hctsiz_data_t hctsiz;
-+ hcchar_data_t hcchar;
-+ haint_data_t haint;
-+ hcint_data_t hcint;
-+
-+ /* Enable HAINTs */
-+ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001);
-+
-+ /* Enable HCINTs */
-+ dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /*
-+ * Send Setup packet (Get Device Descriptor)
-+ */
-+
-+ /* Make sure channel is disabled */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (hcchar.b.chen) {
-+ //fprintf(stderr, "Channel already enabled 1, HCCHAR = %08x\n", hcchar.d32);
-+ hcchar.b.chdis = 1;
-+ // hcchar.b.chen = 1;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+ //sleep(1);
-+ MDELAY(1000);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //if (hcchar.b.chen) {
-+ // fprintf(stderr, "** Channel _still_ enabled 1, HCCHAR = %08x **\n", hcchar.d32);
-+ //}
-+ }
-+
-+ /* Set HCTSIZ */
-+ hctsiz.d32 = 0;
-+ hctsiz.b.xfersize = 8;
-+ hctsiz.b.pktcnt = 1;
-+ hctsiz.b.pid = DWC_OTG_HC_PID_SETUP;
-+ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ /* Set HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
-+ hcchar.b.epdir = 0;
-+ hcchar.b.epnum = 0;
-+ hcchar.b.mps = 8;
-+ hcchar.b.chen = 1;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+
-+ /* Fill FIFO with Setup data for Get Device Descriptor */
-+ data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
-+ dwc_write_reg32(data_fifo++, 0x01000680);
-+ dwc_write_reg32(data_fifo++, 0x00080000);
-+
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Wait for host channel interrupt */
-+ do {
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ } while (gintsts.b.hcintr == 0);
-+
-+ //fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Disable HCINTs */
-+ dwc_write_reg32(&hc_regs->hcintmsk, 0x0000);
-+
-+ /* Disable HAINTs */
-+ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000);
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+}
-+
-+static void do_in_ack(void)
-+{
-+ gintsts_data_t gintsts;
-+ hctsiz_data_t hctsiz;
-+ hcchar_data_t hcchar;
-+ haint_data_t haint;
-+ hcint_data_t hcint;
-+ host_grxsts_data_t grxsts;
-+
-+ /* Enable HAINTs */
-+ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001);
-+
-+ /* Enable HCINTs */
-+ dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /*
-+ * Receive Control In packet
-+ */
-+
-+ /* Make sure channel is disabled */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (hcchar.b.chen) {
-+ //fprintf(stderr, "Channel already enabled 2, HCCHAR = %08x\n", hcchar.d32);
-+ hcchar.b.chdis = 1;
-+ hcchar.b.chen = 1;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+ //sleep(1);
-+ MDELAY(1000);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //if (hcchar.b.chen) {
-+ // fprintf(stderr, "** Channel _still_ enabled 2, HCCHAR = %08x **\n", hcchar.d32);
-+ //}
-+ }
-+
-+ /* Set HCTSIZ */
-+ hctsiz.d32 = 0;
-+ hctsiz.b.xfersize = 8;
-+ hctsiz.b.pktcnt = 1;
-+ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
-+ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ /* Set HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
-+ hcchar.b.epdir = 1;
-+ hcchar.b.epnum = 0;
-+ hcchar.b.mps = 8;
-+ hcchar.b.chen = 1;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Wait for receive status queue interrupt */
-+ do {
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ } while (gintsts.b.rxstsqlvl == 0);
-+
-+ //fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Read RXSTS */
-+ grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp);
-+ //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
-+
-+ /* Clear RXSTSQLVL in GINTSTS */
-+ gintsts.d32 = 0;
-+ gintsts.b.rxstsqlvl = 1;
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ switch (grxsts.b.pktsts) {
-+ case DWC_GRXSTS_PKTSTS_IN:
-+ /* Read the data into the host buffer */
-+ if (grxsts.b.bcnt > 0) {
-+ int i;
-+ int word_count = (grxsts.b.bcnt + 3) / 4;
-+
-+ data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
-+
-+ for (i = 0; i < word_count; i++) {
-+ (void)dwc_read_reg32(data_fifo++);
-+ }
-+ }
-+
-+ //fprintf(stderr, "Received %u bytes\n", (unsigned)grxsts.b.bcnt);
-+ break;
-+
-+ default:
-+ //fprintf(stderr, "** Unexpected GRXSTS packet status 1 **\n");
-+ break;
-+ }
-+
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Wait for receive status queue interrupt */
-+ do {
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ } while (gintsts.b.rxstsqlvl == 0);
-+
-+ //fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Read RXSTS */
-+ grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp);
-+ //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
-+
-+ /* Clear RXSTSQLVL in GINTSTS */
-+ gintsts.d32 = 0;
-+ gintsts.b.rxstsqlvl = 1;
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ switch (grxsts.b.pktsts) {
-+ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
-+ break;
-+
-+ default:
-+ //fprintf(stderr, "** Unexpected GRXSTS packet status 2 **\n");
-+ break;
-+ }
-+
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Wait for host channel interrupt */
-+ do {
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ } while (gintsts.b.hcintr == 0);
-+
-+ //fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ // usleep(100000);
-+ // mdelay(100);
-+ MDELAY(1);
-+
-+ /*
-+ * Send handshake packet
-+ */
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /* Make sure channel is disabled */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ if (hcchar.b.chen) {
-+ //fprintf(stderr, "Channel already enabled 3, HCCHAR = %08x\n", hcchar.d32);
-+ hcchar.b.chdis = 1;
-+ hcchar.b.chen = 1;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+ //sleep(1);
-+ MDELAY(1000);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //if (hcchar.b.chen) {
-+ // fprintf(stderr, "** Channel _still_ enabled 3, HCCHAR = %08x **\n", hcchar.d32);
-+ //}
-+ }
-+
-+ /* Set HCTSIZ */
-+ hctsiz.d32 = 0;
-+ hctsiz.b.xfersize = 0;
-+ hctsiz.b.pktcnt = 1;
-+ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
-+ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ /* Set HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
-+ hcchar.b.epdir = 0;
-+ hcchar.b.epnum = 0;
-+ hcchar.b.mps = 8;
-+ hcchar.b.chen = 1;
-+ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
-+
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Wait for host channel interrupt */
-+ do {
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ } while (gintsts.b.hcintr == 0);
-+
-+ //fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Disable HCINTs */
-+ dwc_write_reg32(&hc_regs->hcintmsk, 0x0000);
-+
-+ /* Disable HAINTs */
-+ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000);
-+
-+ /* Read HAINT */
-+ haint.d32 = dwc_read_reg32(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ dwc_write_reg32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ dwc_write_reg32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ dwc_write_reg32(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+}
-+#endif /* DWC_HS_ELECT_TST */
-+
-+/** Handles hub class-specific requests.*/
-+int dwc_otg_hcd_hub_control(struct usb_hcd *_hcd,
-+ u16 _typeReq,
-+ u16 _wValue,
-+ u16 _wIndex,
-+ char *_buf,
-+ u16 _wLength)
-+{
-+ int retval = 0;
-+
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd (_hcd);
-+ dwc_otg_core_if_t *core_if = hcd_to_dwc_otg_hcd (_hcd)->core_if;
-+ struct usb_hub_descriptor *desc;
-+ hprt0_data_t hprt0 = {.d32 = 0};
-+
-+ uint32_t port_status;
-+
-+ switch (_typeReq) {
-+ case ClearHubFeature:
-+ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearHubFeature 0x%x\n", _wValue);
-+ switch (_wValue) {
-+ case C_HUB_LOCAL_POWER:
-+ case C_HUB_OVER_CURRENT:
-+ /* Nothing required here */
-+ break;
-+ default:
-+ retval = -EINVAL;
-+ DWC_ERROR ("DWC OTG HCD - "
-+ "ClearHubFeature request %xh unknown\n", _wValue);
-+ }
-+ break;
-+ case ClearPortFeature:
-+ if (!_wIndex || _wIndex > 1)
-+ goto error;
-+
-+ switch (_wValue) {
-+ case USB_PORT_FEAT_ENABLE:
-+ DWC_DEBUGPL (DBG_ANY, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_ENABLE\n");
-+ hprt0.d32 = dwc_otg_read_hprt0 (core_if);
-+ hprt0.b.prtena = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ break;
-+ case USB_PORT_FEAT_SUSPEND:
-+ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
-+ hprt0.d32 = dwc_otg_read_hprt0 (core_if);
-+ hprt0.b.prtres = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ /* Clear Resume bit */
-+ mdelay (100);
-+ hprt0.b.prtres = 0;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ break;
-+ case USB_PORT_FEAT_POWER:
-+ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_POWER\n");
-+ hprt0.d32 = dwc_otg_read_hprt0 (core_if);
-+ hprt0.b.prtpwr = 0;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ break;
-+ case USB_PORT_FEAT_INDICATOR:
-+ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
-+ /* Port inidicator not supported */
-+ break;
-+ case USB_PORT_FEAT_C_CONNECTION:
-+ /* Clears drivers internal connect status change
-+ * flag */
-+ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
-+ dwc_otg_hcd->flags.b.port_connect_status_change = 0;
-+ break;
-+ case USB_PORT_FEAT_C_RESET:
-+ /* Clears the driver's internal Port Reset Change
-+ * flag */
-+ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_RESET\n");
-+ dwc_otg_hcd->flags.b.port_reset_change = 0;
-+ break;
-+ case USB_PORT_FEAT_C_ENABLE:
-+ /* Clears the driver's internal Port
-+ * Enable/Disable Change flag */
-+ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
-+ dwc_otg_hcd->flags.b.port_enable_change = 0;
-+ break;
-+ case USB_PORT_FEAT_C_SUSPEND:
-+ /* Clears the driver's internal Port Suspend
-+ * Change flag, which is set when resume signaling on
-+ * the host port is complete */
-+ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
-+ dwc_otg_hcd->flags.b.port_suspend_change = 0;
-+ break;
-+ case USB_PORT_FEAT_C_OVER_CURRENT:
-+ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
-+ dwc_otg_hcd->flags.b.port_over_current_change = 0;
-+ break;
-+ default:
-+ retval = -EINVAL;
-+ DWC_ERROR ("DWC OTG HCD - "
-+ "ClearPortFeature request %xh "
-+ "unknown or unsupported\n", _wValue);
-+ }
-+ break;
-+ case GetHubDescriptor:
-+ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "GetHubDescriptor\n");
-+ desc = (struct usb_hub_descriptor *)_buf;
-+ desc->bDescLength = 9;
-+ desc->bDescriptorType = 0x29;
-+ desc->bNbrPorts = 1;
-+ desc->wHubCharacteristics = 0x08;
-+ desc->bPwrOn2PwrGood = 1;
-+ desc->bHubContrCurrent = 0;
-+ desc->u.hs.DeviceRemovable[0] = 0;
-+ desc->u.hs.DeviceRemovable[1] = 0xff;
-+ break;
-+ case GetHubStatus:
-+ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "GetHubStatus\n");
-+ memset (_buf, 0, 4);
-+ break;
-+ case GetPortStatus:
-+ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "GetPortStatus\n");
-+
-+ if (!_wIndex || _wIndex > 1)
-+ goto error;
-+
-+ port_status = 0;
-+
-+ if (dwc_otg_hcd->flags.b.port_connect_status_change)
-+ port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
-+
-+ if (dwc_otg_hcd->flags.b.port_enable_change)
-+ port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
-+
-+ if (dwc_otg_hcd->flags.b.port_suspend_change)
-+ port_status |= (1 << USB_PORT_FEAT_C_SUSPEND);
-+
-+ if (dwc_otg_hcd->flags.b.port_reset_change)
-+ port_status |= (1 << USB_PORT_FEAT_C_RESET);
-+
-+ if (dwc_otg_hcd->flags.b.port_over_current_change) {
-+ DWC_ERROR("Device Not Supported\n");
-+ port_status |= (1 << USB_PORT_FEAT_C_OVER_CURRENT);
-+ }
-+
-+ if (!dwc_otg_hcd->flags.b.port_connect_status) {
-+ printk("DISCONNECTED PORT\n");
-+ /*
-+ * The port is disconnected, which means the core is
-+ * either in device mode or it soon will be. Just
-+ * return 0's for the remainder of the port status
-+ * since the port register can't be read if the core
-+ * is in device mode.
-+ */
-+#if 1 // winder.
-+ *((u32 *) _buf) = cpu_to_le32(port_status);
-+#else
-+ *((__le32 *) _buf) = cpu_to_le32(port_status);
-+#endif
-+ break;
-+ }
-+
-+ hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0);
-+ DWC_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hprt0.d32);
-+
-+ if (hprt0.b.prtconnsts)
-+ port_status |= (1 << USB_PORT_FEAT_CONNECTION);
-+
-+ if (hprt0.b.prtena)
-+ port_status |= (1 << USB_PORT_FEAT_ENABLE);
-+
-+ if (hprt0.b.prtsusp)
-+ port_status |= (1 << USB_PORT_FEAT_SUSPEND);
-+
-+ if (hprt0.b.prtovrcurract)
-+ port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
-+
-+ if (hprt0.b.prtrst)
-+ port_status |= (1 << USB_PORT_FEAT_RESET);
-+
-+ if (hprt0.b.prtpwr)
-+ port_status |= (1 << USB_PORT_FEAT_POWER);
-+
-+ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED)
-+ port_status |= USB_PORT_STAT_HIGH_SPEED;
-+
-+ else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED)
-+ port_status |= (1 << USB_PORT_FEAT_LOWSPEED);
-+
-+ if (hprt0.b.prttstctl)
-+ port_status |= (1 << USB_PORT_FEAT_TEST);
-+
-+ /* USB_PORT_FEAT_INDICATOR unsupported always 0 */
-+#if 1 // winder.
-+ *((u32 *) _buf) = cpu_to_le32(port_status);
-+#else
-+ *((__le32 *) _buf) = cpu_to_le32(port_status);
-+#endif
-+
-+ break;
-+ case SetHubFeature:
-+ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "SetHubFeature\n");
-+ /* No HUB features supported */
-+ break;
-+ case SetPortFeature:
-+ if (_wValue != USB_PORT_FEAT_TEST && (!_wIndex || _wIndex > 1))
-+ goto error;
-+
-+ if (!dwc_otg_hcd->flags.b.port_connect_status) {
-+ /*
-+ * The port is disconnected, which means the core is
-+ * either in device mode or it soon will be. Just
-+ * return without doing anything since the port
-+ * register can't be written if the core is in device
-+ * mode.
-+ */
-+ break;
-+ }
-+
-+ switch (_wValue) {
-+ case USB_PORT_FEAT_SUSPEND:
-+ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
-+ if (_hcd->self.otg_port == _wIndex
-+ && _hcd->self.b_hnp_enable) {
-+ gotgctl_data_t gotgctl = {.d32=0};
-+ gotgctl.b.hstsethnpen = 1;
-+ dwc_modify_reg32(&core_if->core_global_regs->
-+ gotgctl, 0, gotgctl.d32);
-+ core_if->op_state = A_SUSPEND;
-+ }
-+ hprt0.d32 = dwc_otg_read_hprt0 (core_if);
-+ hprt0.b.prtsusp = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ //DWC_PRINT( "SUSPEND: HPRT0=%0x\n", hprt0.d32);
-+ /* Suspend the Phy Clock */
-+ {
-+ pcgcctl_data_t pcgcctl = {.d32=0};
-+ pcgcctl.b.stoppclk = 1;
-+ dwc_write_reg32(core_if->pcgcctl, pcgcctl.d32);
-+ }
-+
-+ /* For HNP the bus must be suspended for at least 200ms.*/
-+ if (_hcd->self.b_hnp_enable) {
-+ mdelay(200);
-+ //DWC_PRINT( "SUSPEND: wait complete! (%d)\n", _hcd->state);
-+ }
-+ break;
-+ case USB_PORT_FEAT_POWER:
-+ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_POWER\n");
-+ hprt0.d32 = dwc_otg_read_hprt0 (core_if);
-+ hprt0.b.prtpwr = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ break;
-+ case USB_PORT_FEAT_RESET:
-+ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_RESET\n");
-+ hprt0.d32 = dwc_otg_read_hprt0 (core_if);
-+ /* TODO: Is this for OTG protocol??
-+ * We shoudl remove OTG totally for Danube system.
-+ * But, in the future, maybe we need this.
-+ */
-+#if 1 // winder
-+ hprt0.b.prtrst = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+#else
-+ /* When B-Host the Port reset bit is set in
-+ * the Start HCD Callback function, so that
-+ * the reset is started within 1ms of the HNP
-+ * success interrupt. */
-+ if (!_hcd->self.is_b_host) {
-+ hprt0.b.prtrst = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ }
-+#endif
-+ /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
-+ MDELAY (60);
-+ hprt0.b.prtrst = 0;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ break;
-+
-+#ifdef DWC_HS_ELECT_TST
-+ case USB_PORT_FEAT_TEST:
-+ {
-+ uint32_t t;
-+ gintmsk_data_t gintmsk;
-+
-+ t = (_wIndex >> 8); /* MSB wIndex USB */
-+ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_TEST %d\n", t);
-+ printk("USB_PORT_FEAT_TEST %d\n", t);
-+ if (t < 6) {
-+ hprt0.d32 = dwc_otg_read_hprt0 (core_if);
-+ hprt0.b.prttstctl = t;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ } else {
-+ /* Setup global vars with reg addresses (quick and
-+ * dirty hack, should be cleaned up)
-+ */
-+ global_regs = core_if->core_global_regs;
-+ hc_global_regs = core_if->host_if->host_global_regs;
-+ hc_regs = (dwc_otg_hc_regs_t *)((char *)global_regs + 0x500);
-+ data_fifo = (uint32_t *)((char *)global_regs + 0x1000);
-+
-+ if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */
-+ /* Save current interrupt mask */
-+ gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
-+
-+ /* Disable all interrupts while we muck with
-+ * the hardware directly
-+ */
-+ dwc_write_reg32(&global_regs->gintmsk, 0);
-+
-+ /* 15 second delay per the test spec */
-+ mdelay(15000);
-+
-+ /* Drive suspend on the root port */
-+ hprt0.d32 = dwc_otg_read_hprt0 (core_if);
-+ hprt0.b.prtsusp = 1;
-+ hprt0.b.prtres = 0;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+
-+ /* 15 second delay per the test spec */
-+ mdelay(15000);
-+
-+ /* Drive resume on the root port */
-+ hprt0.d32 = dwc_otg_read_hprt0 (core_if);
-+ hprt0.b.prtsusp = 0;
-+ hprt0.b.prtres = 1;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+ mdelay(100);
-+
-+ /* Clear the resume bit */
-+ hprt0.b.prtres = 0;
-+ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32);
-+
-+ /* Restore interrupts */
-+ dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
-+ } else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */
-+ /* Save current interrupt mask */
-+ gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
-+
-+ /* Disable all interrupts while we muck with
-+ * the hardware directly
-+ */
-+ dwc_write_reg32(&global_regs->gintmsk, 0);
-+
-+ /* 15 second delay per the test spec */
-+ mdelay(15000);
-+
-+ /* Send the Setup packet */
-+ do_setup();
-+
-+ /* 15 second delay so nothing else happens for awhile */
-+ mdelay(15000);
-+
-+ /* Restore interrupts */
-+ dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
-+ } else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */
-+ /* Save current interrupt mask */
-+ gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk);
-+
-+ /* Disable all interrupts while we muck with
-+ * the hardware directly
-+ */
-+ dwc_write_reg32(&global_regs->gintmsk, 0);
-+
-+ /* Send the Setup packet */
-+ do_setup();
-+
-+ /* 15 second delay so nothing else happens for awhile */
-+ mdelay(15000);
-+
-+ /* Send the In and Ack packets */
-+ do_in_ack();
-+
-+ /* 15 second delay so nothing else happens for awhile */
-+ mdelay(15000);
-+
-+ /* Restore interrupts */
-+ dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32);
-+ }
-+ }
-+ break;
-+ }
-+#endif /* DWC_HS_ELECT_TST */
-+
-+ case USB_PORT_FEAT_INDICATOR:
-+ DWC_DEBUGPL (DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
-+ /* Not supported */
-+ break;
-+ default:
-+ retval = -EINVAL;
-+ DWC_ERROR ("DWC OTG HCD - "
-+ "SetPortFeature request %xh "
-+ "unknown or unsupported\n", _wValue);
-+ break;
-+ }
-+ break;
-+ default:
-+error:
-+ retval = -EINVAL;
-+ DWC_WARN ("DWC OTG HCD - "
-+ "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n",
-+ _typeReq, _wIndex, _wValue);
-+ break;
-+ }
-+
-+ return retval;
-+}
-+
-+
-+/**
-+ * Assigns transactions from a QTD to a free host channel and initializes the
-+ * host channel to perform the transactions. The host channel is removed from
-+ * the free list.
-+ *
-+ * @param _hcd The HCD state structure.
-+ * @param _qh Transactions from the first QTD for this QH are selected and
-+ * assigned to a free host channel.
-+ */
-+static void assign_and_init_hc(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
-+{
-+ dwc_hc_t *hc;
-+ dwc_otg_qtd_t *qtd;
-+ struct urb *urb;
-+
-+ DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p)\n", __func__, _hcd, _qh);
-+
-+ hc = list_entry(_hcd->free_hc_list.next, dwc_hc_t, hc_list_entry);
-+
-+ /* Remove the host channel from the free list. */
-+ list_del_init(&hc->hc_list_entry);
-+
-+ qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
-+ urb = qtd->urb;
-+ _qh->channel = hc;
-+ _qh->qtd_in_process = qtd;
-+
-+ /*
-+ * Use usb_pipedevice to determine device address. This address is
-+ * 0 before the SET_ADDRESS command and the correct address afterward.
-+ */
-+ hc->dev_addr = usb_pipedevice(urb->pipe);
-+ hc->ep_num = usb_pipeendpoint(urb->pipe);
-+
-+ if (urb->dev->speed == USB_SPEED_LOW) {
-+ hc->speed = DWC_OTG_EP_SPEED_LOW;
-+ } else if (urb->dev->speed == USB_SPEED_FULL) {
-+ hc->speed = DWC_OTG_EP_SPEED_FULL;
-+ } else {
-+ hc->speed = DWC_OTG_EP_SPEED_HIGH;
-+ }
-+ hc->max_packet = dwc_max_packet(_qh->maxp);
-+
-+ hc->xfer_started = 0;
-+ hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS;
-+ hc->error_state = (qtd->error_count > 0);
-+ hc->halt_on_queue = 0;
-+ hc->halt_pending = 0;
-+ hc->requests = 0;
-+
-+ /*
-+ * The following values may be modified in the transfer type section
-+ * below. The xfer_len value may be reduced when the transfer is
-+ * started to accommodate the max widths of the XferSize and PktCnt
-+ * fields in the HCTSIZn register.
-+ */
-+ hc->do_ping = _qh->ping_state;
-+ hc->ep_is_in = (usb_pipein(urb->pipe) != 0);
-+ hc->data_pid_start = _qh->data_toggle;
-+ hc->multi_count = 1;
-+
-+ if (_hcd->core_if->dma_enable) {
-+ hc->xfer_buff = (uint8_t *)(u32)urb->transfer_dma + urb->actual_length;
-+ } else {
-+ hc->xfer_buff = (uint8_t *)urb->transfer_buffer + urb->actual_length;
-+ }
-+ hc->xfer_len = urb->transfer_buffer_length - urb->actual_length;
-+ hc->xfer_count = 0;
-+
-+ /*
-+ * Set the split attributes
-+ */
-+ hc->do_split = 0;
-+ if (_qh->do_split) {
-+ hc->do_split = 1;
-+ hc->xact_pos = qtd->isoc_split_pos;
-+ hc->complete_split = qtd->complete_split;
-+ hc->hub_addr = urb->dev->tt->hub->devnum;
-+ hc->port_addr = urb->dev->ttport;
-+ }
-+
-+ switch (usb_pipetype(urb->pipe)) {
-+ case PIPE_CONTROL:
-+ hc->ep_type = DWC_OTG_EP_TYPE_CONTROL;
-+ switch (qtd->control_phase) {
-+ case DWC_OTG_CONTROL_SETUP:
-+ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction\n");
-+ hc->do_ping = 0;
-+ hc->ep_is_in = 0;
-+ hc->data_pid_start = DWC_OTG_HC_PID_SETUP;
-+ if (_hcd->core_if->dma_enable) {
-+ hc->xfer_buff = (uint8_t *)(u32)urb->setup_dma;
-+ } else {
-+ hc->xfer_buff = (uint8_t *)urb->setup_packet;
-+ }
-+ hc->xfer_len = 8;
-+ break;
-+ case DWC_OTG_CONTROL_DATA:
-+ DWC_DEBUGPL(DBG_HCDV, " Control data transaction\n");
-+ hc->data_pid_start = qtd->data_toggle;
-+ break;
-+ case DWC_OTG_CONTROL_STATUS:
-+ /*
-+ * Direction is opposite of data direction or IN if no
-+ * data.
-+ */
-+ DWC_DEBUGPL(DBG_HCDV, " Control status transaction\n");
-+ if (urb->transfer_buffer_length == 0) {
-+ hc->ep_is_in = 1;
-+ } else {
-+ hc->ep_is_in = (usb_pipein(urb->pipe) != USB_DIR_IN);
-+ }
-+ if (hc->ep_is_in) {
-+ hc->do_ping = 0;
-+ }
-+ hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
-+ hc->xfer_len = 0;
-+ if (_hcd->core_if->dma_enable) {
-+ hc->xfer_buff = (uint8_t *)_hcd->status_buf_dma;
-+ } else {
-+ hc->xfer_buff = (uint8_t *)_hcd->status_buf;
-+ }
-+ break;
-+ }
-+ break;
-+ case PIPE_BULK:
-+ hc->ep_type = DWC_OTG_EP_TYPE_BULK;
-+ break;
-+ case PIPE_INTERRUPT:
-+ hc->ep_type = DWC_OTG_EP_TYPE_INTR;
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ {
-+ struct usb_iso_packet_descriptor *frame_desc;
-+ frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index];
-+ hc->ep_type = DWC_OTG_EP_TYPE_ISOC;
-+ if (_hcd->core_if->dma_enable) {
-+ hc->xfer_buff = (uint8_t *)(u32)urb->transfer_dma;
-+ } else {
-+ hc->xfer_buff = (uint8_t *)urb->transfer_buffer;
-+ }
-+ hc->xfer_buff += frame_desc->offset + qtd->isoc_split_offset;
-+ hc->xfer_len = frame_desc->length - qtd->isoc_split_offset;
-+
-+ if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) {
-+ if (hc->xfer_len <= 188) {
-+ hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL;
-+ }
-+ else {
-+ hc->xact_pos = DWC_HCSPLIT_XACTPOS_BEGIN;
-+ }
-+ }
-+ }
-+ break;
-+ }
-+
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ /*
-+ * This value may be modified when the transfer is started to
-+ * reflect the actual transfer length.
-+ */
-+ hc->multi_count = dwc_hb_mult(_qh->maxp);
-+ }
-+
-+ dwc_otg_hc_init(_hcd->core_if, hc);
-+ hc->qh = _qh;
-+}
-+#define DEBUG_HOST_CHANNELS
-+#ifdef DEBUG_HOST_CHANNELS
-+static int last_sel_trans_num_per_scheduled = 0;
-+module_param(last_sel_trans_num_per_scheduled, int, 0444);
-+
-+static int last_sel_trans_num_nonper_scheduled = 0;
-+module_param(last_sel_trans_num_nonper_scheduled, int, 0444);
-+
-+static int last_sel_trans_num_avail_hc_at_start = 0;
-+module_param(last_sel_trans_num_avail_hc_at_start, int, 0444);
-+
-+static int last_sel_trans_num_avail_hc_at_end = 0;
-+module_param(last_sel_trans_num_avail_hc_at_end, int, 0444);
-+#endif /* DEBUG_HOST_CHANNELS */
-+
-+/**
-+ * This function selects transactions from the HCD transfer schedule and
-+ * assigns them to available host channels. It is called from HCD interrupt
-+ * handler functions.
-+ *
-+ * @param _hcd The HCD state structure.
-+ *
-+ * @return The types of new transactions that were assigned to host channels.
-+ */
-+dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *_hcd)
-+{
-+ struct list_head *qh_ptr;
-+ dwc_otg_qh_t *qh;
-+ int num_channels;
-+ unsigned long flags;
-+ dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE;
-+
-+#ifdef DEBUG_SOF
-+ DWC_DEBUGPL(DBG_HCD, " Select Transactions\n");
-+#endif /* */
-+
-+#ifdef DEBUG_HOST_CHANNELS
-+ last_sel_trans_num_per_scheduled = 0;
-+ last_sel_trans_num_nonper_scheduled = 0;
-+ last_sel_trans_num_avail_hc_at_start = _hcd->available_host_channels;
-+#endif /* DEBUG_HOST_CHANNELS */
-+
-+ /* Process entries in the periodic ready list. */
-+ num_channels = _hcd->core_if->core_params->host_channels;
-+ qh_ptr = _hcd->periodic_sched_ready.next;
-+ while (qh_ptr != &_hcd->periodic_sched_ready
-+ && !list_empty(&_hcd->free_hc_list)) {
-+
-+ // Make sure we leave one channel for non periodic transactions.
-+ local_irq_save(flags);
-+ if (_hcd->available_host_channels <= 1) {
-+ local_irq_restore(flags);
-+ break;
-+ }
-+ _hcd->available_host_channels--;
-+ local_irq_restore(flags);
-+#ifdef DEBUG_HOST_CHANNELS
-+ last_sel_trans_num_per_scheduled++;
-+#endif /* DEBUG_HOST_CHANNELS */
-+
-+ qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
-+ assign_and_init_hc(_hcd, qh);
-+
-+ /*
-+ * Move the QH from the periodic ready schedule to the
-+ * periodic assigned schedule.
-+ */
-+ qh_ptr = qh_ptr->next;
-+ local_irq_save(flags);
-+ list_move(&qh->qh_list_entry, &_hcd->periodic_sched_assigned);
-+ local_irq_restore(flags);
-+ ret_val = DWC_OTG_TRANSACTION_PERIODIC;
-+ }
-+
-+ /*
-+ * Process entries in the deferred portion of the non-periodic list.
-+ * A NAK put them here and, at the right time, they need to be
-+ * placed on the sched_inactive list.
-+ */
-+ qh_ptr = _hcd->non_periodic_sched_deferred.next;
-+ while (qh_ptr != &_hcd->non_periodic_sched_deferred) {
-+ uint16_t frame_number =
-+ dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(_hcd));
-+ qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
-+ qh_ptr = qh_ptr->next;
-+
-+ if (dwc_frame_num_le(qh->sched_frame, frame_number)) {
-+ // NAK did this
-+ /*
-+ * Move the QH from the non periodic deferred schedule to
-+ * the non periodic inactive schedule.
-+ */
-+ local_irq_save(flags);
-+ list_move(&qh->qh_list_entry,
-+ &_hcd->non_periodic_sched_inactive);
-+ local_irq_restore(flags);
-+ }
-+ }
-+
-+ /*
-+ * Process entries in the inactive portion of the non-periodic
-+ * schedule. Some free host channels may not be used if they are
-+ * reserved for periodic transfers.
-+ */
-+ qh_ptr = _hcd->non_periodic_sched_inactive.next;
-+ num_channels = _hcd->core_if->core_params->host_channels;
-+ while (qh_ptr != &_hcd->non_periodic_sched_inactive
-+ && !list_empty(&_hcd->free_hc_list)) {
-+
-+ local_irq_save(flags);
-+ if (_hcd->available_host_channels < 1) {
-+ local_irq_restore(flags);
-+ break;
-+ }
-+ _hcd->available_host_channels--;
-+ local_irq_restore(flags);
-+#ifdef DEBUG_HOST_CHANNELS
-+ last_sel_trans_num_nonper_scheduled++;
-+#endif /* DEBUG_HOST_CHANNELS */
-+
-+ qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
-+ assign_and_init_hc(_hcd, qh);
-+
-+ /*
-+ * Move the QH from the non-periodic inactive schedule to the
-+ * non-periodic active schedule.
-+ */
-+ qh_ptr = qh_ptr->next;
-+ local_irq_save(flags);
-+ list_move(&qh->qh_list_entry, &_hcd->non_periodic_sched_active);
-+ local_irq_restore(flags);
-+
-+ if (ret_val == DWC_OTG_TRANSACTION_NONE) {
-+ ret_val = DWC_OTG_TRANSACTION_NON_PERIODIC;
-+ } else {
-+ ret_val = DWC_OTG_TRANSACTION_ALL;
-+ }
-+
-+ }
-+#ifdef DEBUG_HOST_CHANNELS
-+ last_sel_trans_num_avail_hc_at_end = _hcd->available_host_channels;
-+#endif /* DEBUG_HOST_CHANNELS */
-+
-+ return ret_val;
-+}
-+
-+/**
-+ * Attempts to queue a single transaction request for a host channel
-+ * associated with either a periodic or non-periodic transfer. This function
-+ * assumes that there is space available in the appropriate request queue. For
-+ * an OUT transfer or SETUP transaction in Slave mode, it checks whether space
-+ * is available in the appropriate Tx FIFO.
-+ *
-+ * @param _hcd The HCD state structure.
-+ * @param _hc Host channel descriptor associated with either a periodic or
-+ * non-periodic transfer.
-+ * @param _fifo_dwords_avail Number of DWORDs available in the periodic Tx
-+ * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic
-+ * transfers.
-+ *
-+ * @return 1 if a request is queued and more requests may be needed to
-+ * complete the transfer, 0 if no more requests are required for this
-+ * transfer, -1 if there is insufficient space in the Tx FIFO.
-+ */
-+static int queue_transaction(dwc_otg_hcd_t *_hcd,
-+ dwc_hc_t *_hc,
-+ uint16_t _fifo_dwords_avail)
-+{
-+ int retval;
-+
-+ if (_hcd->core_if->dma_enable) {
-+ if (!_hc->xfer_started) {
-+ dwc_otg_hc_start_transfer(_hcd->core_if, _hc);
-+ _hc->qh->ping_state = 0;
-+ }
-+ retval = 0;
-+ } else if (_hc->halt_pending) {
-+ /* Don't queue a request if the channel has been halted. */
-+ retval = 0;
-+ } else if (_hc->halt_on_queue) {
-+ dwc_otg_hc_halt(_hcd->core_if, _hc, _hc->halt_status);
-+ retval = 0;
-+ } else if (_hc->do_ping) {
-+ if (!_hc->xfer_started) {
-+ dwc_otg_hc_start_transfer(_hcd->core_if, _hc);
-+ }
-+ retval = 0;
-+ } else if (!_hc->ep_is_in ||
-+ _hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
-+ if ((_fifo_dwords_avail * 4) >= _hc->max_packet) {
-+ if (!_hc->xfer_started) {
-+ dwc_otg_hc_start_transfer(_hcd->core_if, _hc);
-+ retval = 1;
-+ } else {
-+ retval = dwc_otg_hc_continue_transfer(_hcd->core_if, _hc);
-+ }
-+ } else {
-+ retval = -1;
-+ }
-+ } else {
-+ if (!_hc->xfer_started) {
-+ dwc_otg_hc_start_transfer(_hcd->core_if, _hc);
-+ retval = 1;
-+ } else {
-+ retval = dwc_otg_hc_continue_transfer(_hcd->core_if, _hc);
-+ }
-+ }
-+
-+ return retval;
-+}
-+
-+/**
-+ * Processes active non-periodic channels and queues transactions for these
-+ * channels to the DWC_otg controller. After queueing transactions, the NP Tx
-+ * FIFO Empty interrupt is enabled if there are more transactions to queue as
-+ * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx
-+ * FIFO Empty interrupt is disabled.
-+ */
-+static void process_non_periodic_channels(dwc_otg_hcd_t *_hcd)
-+{
-+ gnptxsts_data_t tx_status;
-+ struct list_head *orig_qh_ptr;
-+ dwc_otg_qh_t *qh;
-+ int status;
-+ int no_queue_space = 0;
-+ int no_fifo_space = 0;
-+ int more_to_do = 0;
-+
-+ dwc_otg_core_global_regs_t *global_regs = _hcd->core_if->core_global_regs;
-+
-+ DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n");
-+#ifdef DEBUG
-+ tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
-+ DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (before queue): %d\n",
-+ tx_status.b.nptxqspcavail);
-+ DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (before queue): %d\n",
-+ tx_status.b.nptxfspcavail);
-+#endif
-+ /*
-+ * Keep track of the starting point. Skip over the start-of-list
-+ * entry.
-+ */
-+ if (_hcd->non_periodic_qh_ptr == &_hcd->non_periodic_sched_active) {
-+ _hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next;
-+ }
-+ orig_qh_ptr = _hcd->non_periodic_qh_ptr;
-+
-+ /*
-+ * Process once through the active list or until no more space is
-+ * available in the request queue or the Tx FIFO.
-+ */
-+ do {
-+ tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
-+ if (!_hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) {
-+ no_queue_space = 1;
-+ break;
-+ }
-+
-+ qh = list_entry(_hcd->non_periodic_qh_ptr, dwc_otg_qh_t, qh_list_entry);
-+ status = queue_transaction(_hcd, qh->channel, tx_status.b.nptxfspcavail);
-+
-+ if (status > 0) {
-+ more_to_do = 1;
-+ } else if (status < 0) {
-+ no_fifo_space = 1;
-+ break;
-+ }
-+
-+ /* Advance to next QH, skipping start-of-list entry. */
-+ _hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next;
-+ if (_hcd->non_periodic_qh_ptr == &_hcd->non_periodic_sched_active) {
-+ _hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next;
-+ }
-+
-+ } while (_hcd->non_periodic_qh_ptr != orig_qh_ptr);
-+
-+ if (!_hcd->core_if->dma_enable) {
-+ gintmsk_data_t intr_mask = {.d32 = 0};
-+ intr_mask.b.nptxfempty = 1;
-+
-+#ifdef DEBUG
-+ tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts);
-+ DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (after queue): %d\n",
-+ tx_status.b.nptxqspcavail);
-+ DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (after queue): %d\n",
-+ tx_status.b.nptxfspcavail);
-+#endif
-+ if (more_to_do || no_queue_space || no_fifo_space) {
-+ /*
-+ * May need to queue more transactions as the request
-+ * queue or Tx FIFO empties. Enable the non-periodic
-+ * Tx FIFO empty interrupt. (Always use the half-empty
-+ * level to ensure that new requests are loaded as
-+ * soon as possible.)
-+ */
-+ dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
-+ } else {
-+ /*
-+ * Disable the Tx FIFO empty interrupt since there are
-+ * no more transactions that need to be queued right
-+ * now. This function is called from interrupt
-+ * handlers to queue more transactions as transfer
-+ * states change.
-+ */
-+ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
-+ }
-+ }
-+}
-+
-+/**
-+ * Processes periodic channels for the next frame and queues transactions for
-+ * these channels to the DWC_otg controller. After queueing transactions, the
-+ * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions
-+ * to queue as Periodic Tx FIFO or request queue space becomes available.
-+ * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled.
-+ */
-+static void process_periodic_channels(dwc_otg_hcd_t *_hcd)
-+{
-+ hptxsts_data_t tx_status;
-+ struct list_head *qh_ptr;
-+ dwc_otg_qh_t *qh;
-+ int status;
-+ int no_queue_space = 0;
-+ int no_fifo_space = 0;
-+
-+ dwc_otg_host_global_regs_t *host_regs;
-+ host_regs = _hcd->core_if->host_if->host_global_regs;
-+
-+ DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n");
-+#ifdef DEBUG
-+ tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
-+ DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (before queue): %d\n",
-+ tx_status.b.ptxqspcavail);
-+ DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (before queue): %d\n",
-+ tx_status.b.ptxfspcavail);
-+#endif
-+
-+ qh_ptr = _hcd->periodic_sched_assigned.next;
-+ while (qh_ptr != &_hcd->periodic_sched_assigned) {
-+ tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
-+ if (tx_status.b.ptxqspcavail == 0) {
-+ no_queue_space = 1;
-+ break;
-+ }
-+
-+ qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry);
-+
-+ /*
-+ * Set a flag if we're queuing high-bandwidth in slave mode.
-+ * The flag prevents any halts to get into the request queue in
-+ * the middle of multiple high-bandwidth packets getting queued.
-+ */
-+ if ((!_hcd->core_if->dma_enable) &&
-+ (qh->channel->multi_count > 1))
-+ {
-+ _hcd->core_if->queuing_high_bandwidth = 1;
-+ }
-+
-+ status = queue_transaction(_hcd, qh->channel, tx_status.b.ptxfspcavail);
-+ if (status < 0) {
-+ no_fifo_space = 1;
-+ break;
-+ }
-+
-+ /*
-+ * In Slave mode, stay on the current transfer until there is
-+ * nothing more to do or the high-bandwidth request count is
-+ * reached. In DMA mode, only need to queue one request. The
-+ * controller automatically handles multiple packets for
-+ * high-bandwidth transfers.
-+ */
-+ if (_hcd->core_if->dma_enable ||
-+ (status == 0 ||
-+ qh->channel->requests == qh->channel->multi_count)) {
-+ qh_ptr = qh_ptr->next;
-+ /*
-+ * Move the QH from the periodic assigned schedule to
-+ * the periodic queued schedule.
-+ */
-+ list_move(&qh->qh_list_entry, &_hcd->periodic_sched_queued);
-+
-+ /* done queuing high bandwidth */
-+ _hcd->core_if->queuing_high_bandwidth = 0;
-+ }
-+ }
-+
-+ if (!_hcd->core_if->dma_enable) {
-+ dwc_otg_core_global_regs_t *global_regs;
-+ gintmsk_data_t intr_mask = {.d32 = 0};
-+
-+ global_regs = _hcd->core_if->core_global_regs;
-+ intr_mask.b.ptxfempty = 1;
-+#ifdef DEBUG
-+ tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts);
-+ DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (after queue): %d\n",
-+ tx_status.b.ptxqspcavail);
-+ DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (after queue): %d\n",
-+ tx_status.b.ptxfspcavail);
-+#endif
-+ if (!(list_empty(&_hcd->periodic_sched_assigned)) ||
-+ no_queue_space || no_fifo_space) {
-+ /*
-+ * May need to queue more transactions as the request
-+ * queue or Tx FIFO empties. Enable the periodic Tx
-+ * FIFO empty interrupt. (Always use the half-empty
-+ * level to ensure that new requests are loaded as
-+ * soon as possible.)
-+ */
-+ dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32);
-+ } else {
-+ /*
-+ * Disable the Tx FIFO empty interrupt since there are
-+ * no more transactions that need to be queued right
-+ * now. This function is called from interrupt
-+ * handlers to queue more transactions as transfer
-+ * states change.
-+ */
-+ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
-+ }
-+ }
-+}
-+
-+/**
-+ * This function processes the currently active host channels and queues
-+ * transactions for these channels to the DWC_otg controller. It is called
-+ * from HCD interrupt handler functions.
-+ *
-+ * @param _hcd The HCD state structure.
-+ * @param _tr_type The type(s) of transactions to queue (non-periodic,
-+ * periodic, or both).
-+ */
-+void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *_hcd,
-+ dwc_otg_transaction_type_e _tr_type)
-+{
-+#ifdef DEBUG_SOF
-+ DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n");
-+#endif
-+ /* Process host channels associated with periodic transfers. */
-+ if ((_tr_type == DWC_OTG_TRANSACTION_PERIODIC ||
-+ _tr_type == DWC_OTG_TRANSACTION_ALL) &&
-+ !list_empty(&_hcd->periodic_sched_assigned)) {
-+
-+ process_periodic_channels(_hcd);
-+ }
-+
-+ /* Process host channels associated with non-periodic transfers. */
-+ if ((_tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC ||
-+ _tr_type == DWC_OTG_TRANSACTION_ALL)) {
-+ if (!list_empty(&_hcd->non_periodic_sched_active)) {
-+ process_non_periodic_channels(_hcd);
-+ } else {
-+ /*
-+ * Ensure NP Tx FIFO empty interrupt is disabled when
-+ * there are no non-periodic transfers to process.
-+ */
-+ gintmsk_data_t gintmsk = {.d32 = 0};
-+ gintmsk.b.nptxfempty = 1;
-+ dwc_modify_reg32(&_hcd->core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
-+ }
-+ }
-+}
-+
-+/**
-+ * Sets the final status of an URB and returns it to the device driver. Any
-+ * required cleanup of the URB is performed.
-+ */
-+void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t * _hcd, struct urb *_urb,
-+ int _status)
-+ __releases(_hcd->lock)
-+__acquires(_hcd->lock)
-+{
-+#ifdef DEBUG
-+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
-+ DWC_PRINT("%s: urb %p, device %d, ep %d %s, status=%d\n",
-+ __func__, _urb, usb_pipedevice(_urb->pipe),
-+ usb_pipeendpoint(_urb->pipe),
-+ usb_pipein(_urb->pipe) ? "IN" : "OUT", _status);
-+ if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS) {
-+ int i;
-+ for (i = 0; i < _urb->number_of_packets; i++) {
-+ DWC_PRINT(" ISO Desc %d status: %d\n",
-+ i, _urb->iso_frame_desc[i].status);
-+ }
-+ }
-+ }
-+#endif
-+
-+ _urb->status = _status;
-+ _urb->hcpriv = NULL;
-+ usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(_hcd), _urb);
-+ spin_unlock(&_hcd->lock);
-+ usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(_hcd), _urb, _status);
-+ spin_lock(&_hcd->lock);
-+}
-+
-+/*
-+ * Returns the Queue Head for an URB.
-+ */
-+dwc_otg_qh_t *dwc_urb_to_qh(struct urb *_urb)
-+{
-+ struct usb_host_endpoint *ep = dwc_urb_to_endpoint(_urb);
-+ return (dwc_otg_qh_t *)ep->hcpriv;
-+}
-+
-+#ifdef DEBUG
-+void dwc_print_setup_data (uint8_t *setup)
-+{
-+ int i;
-+ if (CHK_DEBUG_LEVEL(DBG_HCD)){
-+ DWC_PRINT("Setup Data = MSB ");
-+ for (i=7; i>=0; i--) DWC_PRINT ("%02x ", setup[i]);
-+ DWC_PRINT("\n");
-+ DWC_PRINT(" bmRequestType Tranfer = %s\n", (setup[0]&0x80) ? "Device-to-Host" : "Host-to-Device");
-+ DWC_PRINT(" bmRequestType Type = ");
-+ switch ((setup[0]&0x60) >> 5) {
-+ case 0: DWC_PRINT("Standard\n"); break;
-+ case 1: DWC_PRINT("Class\n"); break;
-+ case 2: DWC_PRINT("Vendor\n"); break;
-+ case 3: DWC_PRINT("Reserved\n"); break;
-+ }
-+ DWC_PRINT(" bmRequestType Recipient = ");
-+ switch (setup[0]&0x1f) {
-+ case 0: DWC_PRINT("Device\n"); break;
-+ case 1: DWC_PRINT("Interface\n"); break;
-+ case 2: DWC_PRINT("Endpoint\n"); break;
-+ case 3: DWC_PRINT("Other\n"); break;
-+ default: DWC_PRINT("Reserved\n"); break;
-+ }
-+ DWC_PRINT(" bRequest = 0x%0x\n", setup[1]);
-+ DWC_PRINT(" wValue = 0x%0x\n", *((uint16_t *)&setup[2]));
-+ DWC_PRINT(" wIndex = 0x%0x\n", *((uint16_t *)&setup[4]));
-+ DWC_PRINT(" wLength = 0x%0x\n\n", *((uint16_t *)&setup[6]));
-+ }
-+}
-+#endif
-+
-+void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *_hcd) {
-+#ifdef DEBUG
-+#if 0
-+ DWC_PRINT("Frame remaining at SOF:\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ _hcd->frrem_samples, _hcd->frrem_accum,
-+ (_hcd->frrem_samples > 0) ?
-+ _hcd->frrem_accum/_hcd->frrem_samples : 0);
-+
-+ DWC_PRINT("\n");
-+ DWC_PRINT("Frame remaining at start_transfer (uframe 7):\n");
-+ DWC_PRINT(" samples %u, accum %u, avg %u\n",
-+ _hcd->core_if->hfnum_7_samples, _hcd->core_if->hfnum_7_frrem_accum,
-+ (_hcd->core_if->hfnum_7_samples > 0) ?
-+ _hcd->core_if->hfnum_7_frrem_accum/_hcd->core_if->hfnum_7_samples : 0);
-+ DWC_PRINT("Frame remaining at start_transfer (uframe 0):\n");
-+ DWC_PRINT(" samples %u, accum %u, avg %u\n",
-+ _hcd->core_if->hfnum_0_samples, _hcd->core_if->hfnum_0_frrem_accum,
-+ (_hcd->core_if->hfnum_0_samples > 0) ?
-+ _hcd->core_if->hfnum_0_frrem_accum/_hcd->core_if->hfnum_0_samples : 0);
-+ DWC_PRINT("Frame remaining at start_transfer (uframe 1-6):\n");
-+ DWC_PRINT(" samples %u, accum %u, avg %u\n",
-+ _hcd->core_if->hfnum_other_samples, _hcd->core_if->hfnum_other_frrem_accum,
-+ (_hcd->core_if->hfnum_other_samples > 0) ?
-+ _hcd->core_if->hfnum_other_frrem_accum/_hcd->core_if->hfnum_other_samples : 0);
-+
-+ DWC_PRINT("\n");
-+ DWC_PRINT("Frame remaining at sample point A (uframe 7):\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ _hcd->hfnum_7_samples_a, _hcd->hfnum_7_frrem_accum_a,
-+ (_hcd->hfnum_7_samples_a > 0) ?
-+ _hcd->hfnum_7_frrem_accum_a/_hcd->hfnum_7_samples_a : 0);
-+ DWC_PRINT("Frame remaining at sample point A (uframe 0):\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ _hcd->hfnum_0_samples_a, _hcd->hfnum_0_frrem_accum_a,
-+ (_hcd->hfnum_0_samples_a > 0) ?
-+ _hcd->hfnum_0_frrem_accum_a/_hcd->hfnum_0_samples_a : 0);
-+ DWC_PRINT("Frame remaining at sample point A (uframe 1-6):\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ _hcd->hfnum_other_samples_a, _hcd->hfnum_other_frrem_accum_a,
-+ (_hcd->hfnum_other_samples_a > 0) ?
-+ _hcd->hfnum_other_frrem_accum_a/_hcd->hfnum_other_samples_a : 0);
-+
-+ DWC_PRINT("\n");
-+ DWC_PRINT("Frame remaining at sample point B (uframe 7):\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ _hcd->hfnum_7_samples_b, _hcd->hfnum_7_frrem_accum_b,
-+ (_hcd->hfnum_7_samples_b > 0) ?
-+ _hcd->hfnum_7_frrem_accum_b/_hcd->hfnum_7_samples_b : 0);
-+ DWC_PRINT("Frame remaining at sample point B (uframe 0):\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ _hcd->hfnum_0_samples_b, _hcd->hfnum_0_frrem_accum_b,
-+ (_hcd->hfnum_0_samples_b > 0) ?
-+ _hcd->hfnum_0_frrem_accum_b/_hcd->hfnum_0_samples_b : 0);
-+ DWC_PRINT("Frame remaining at sample point B (uframe 1-6):\n");
-+ DWC_PRINT(" samples %u, accum %llu, avg %llu\n",
-+ _hcd->hfnum_other_samples_b, _hcd->hfnum_other_frrem_accum_b,
-+ (_hcd->hfnum_other_samples_b > 0) ?
-+ _hcd->hfnum_other_frrem_accum_b/_hcd->hfnum_other_samples_b : 0);
-+#endif
-+#endif
-+}
-+
-+void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *_hcd)
-+{
-+#ifdef DEBUG
-+ int num_channels;
-+ int i;
-+ gnptxsts_data_t np_tx_status;
-+ hptxsts_data_t p_tx_status;
-+
-+ num_channels = _hcd->core_if->core_params->host_channels;
-+ DWC_PRINT("\n");
-+ DWC_PRINT("************************************************************\n");
-+ DWC_PRINT("HCD State:\n");
-+ DWC_PRINT(" Num channels: %d\n", num_channels);
-+ for (i = 0; i < num_channels; i++) {
-+ dwc_hc_t *hc = _hcd->hc_ptr_array[i];
-+ DWC_PRINT(" Channel %d:\n", i);
-+ DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
-+ hc->dev_addr, hc->ep_num, hc->ep_is_in);
-+ DWC_PRINT(" speed: %d\n", hc->speed);
-+ DWC_PRINT(" ep_type: %d\n", hc->ep_type);
-+ DWC_PRINT(" max_packet: %d\n", hc->max_packet);
-+ DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start);
-+ DWC_PRINT(" multi_count: %d\n", hc->multi_count);
-+ DWC_PRINT(" xfer_started: %d\n", hc->xfer_started);
-+ DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff);
-+ DWC_PRINT(" xfer_len: %d\n", hc->xfer_len);
-+ DWC_PRINT(" xfer_count: %d\n", hc->xfer_count);
-+ DWC_PRINT(" halt_on_queue: %d\n", hc->halt_on_queue);
-+ DWC_PRINT(" halt_pending: %d\n", hc->halt_pending);
-+ DWC_PRINT(" halt_status: %d\n", hc->halt_status);
-+ DWC_PRINT(" do_split: %d\n", hc->do_split);
-+ DWC_PRINT(" complete_split: %d\n", hc->complete_split);
-+ DWC_PRINT(" hub_addr: %d\n", hc->hub_addr);
-+ DWC_PRINT(" port_addr: %d\n", hc->port_addr);
-+ DWC_PRINT(" xact_pos: %d\n", hc->xact_pos);
-+ DWC_PRINT(" requests: %d\n", hc->requests);
-+ DWC_PRINT(" qh: %p\n", hc->qh);
-+ if (hc->xfer_started) {
-+ hfnum_data_t hfnum;
-+ hcchar_data_t hcchar;
-+ hctsiz_data_t hctsiz;
-+ hcint_data_t hcint;
-+ hcintmsk_data_t hcintmsk;
-+ hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum);
-+ hcchar.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hcchar);
-+ hctsiz.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hctsiz);
-+ hcint.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hcint);
-+ hcintmsk.d32 = dwc_read_reg32(&_hcd->core_if->host_if->hc_regs[i]->hcintmsk);
-+ DWC_PRINT(" hfnum: 0x%08x\n", hfnum.d32);
-+ DWC_PRINT(" hcchar: 0x%08x\n", hcchar.d32);
-+ DWC_PRINT(" hctsiz: 0x%08x\n", hctsiz.d32);
-+ DWC_PRINT(" hcint: 0x%08x\n", hcint.d32);
-+ DWC_PRINT(" hcintmsk: 0x%08x\n", hcintmsk.d32);
-+ }
-+ if (hc->xfer_started && (hc->qh != NULL) && (hc->qh->qtd_in_process != NULL)) {
-+ dwc_otg_qtd_t *qtd;
-+ struct urb *urb;
-+ qtd = hc->qh->qtd_in_process;
-+ urb = qtd->urb;
-+ DWC_PRINT(" URB Info:\n");
-+ DWC_PRINT(" qtd: %p, urb: %p\n", qtd, urb);
-+ if (urb != NULL) {
-+ DWC_PRINT(" Dev: %d, EP: %d %s\n",
-+ usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe),
-+ usb_pipein(urb->pipe) ? "IN" : "OUT");
-+ DWC_PRINT(" Max packet size: %d\n",
-+ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
-+ DWC_PRINT(" transfer_buffer: %p\n", urb->transfer_buffer);
-+ DWC_PRINT(" transfer_dma: %p\n", (void *)urb->transfer_dma);
-+ DWC_PRINT(" transfer_buffer_length: %d\n", urb->transfer_buffer_length);
-+ DWC_PRINT(" actual_length: %d\n", urb->actual_length);
-+ }
-+ }
-+ }
-+ //DWC_PRINT(" non_periodic_channels: %d\n", _hcd->non_periodic_channels);
-+ //DWC_PRINT(" periodic_channels: %d\n", _hcd->periodic_channels);
-+ DWC_PRINT(" available_channels: %d\n", _hcd->available_host_channels);
-+ DWC_PRINT(" periodic_usecs: %d\n", _hcd->periodic_usecs);
-+ np_tx_status.d32 = dwc_read_reg32(&_hcd->core_if->core_global_regs->gnptxsts);
-+ DWC_PRINT(" NP Tx Req Queue Space Avail: %d\n", np_tx_status.b.nptxqspcavail);
-+ DWC_PRINT(" NP Tx FIFO Space Avail: %d\n", np_tx_status.b.nptxfspcavail);
-+ p_tx_status.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hptxsts);
-+ DWC_PRINT(" P Tx Req Queue Space Avail: %d\n", p_tx_status.b.ptxqspcavail);
-+ DWC_PRINT(" P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail);
-+ dwc_otg_hcd_dump_frrem(_hcd);
-+ dwc_otg_dump_global_registers(_hcd->core_if);
-+ dwc_otg_dump_host_registers(_hcd->core_if);
-+ DWC_PRINT("************************************************************\n");
-+ DWC_PRINT("\n");
-+#endif
-+}
-+#endif /* DWC_DEVICE_ONLY */
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_hcd.h
-@@ -0,0 +1,676 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd.h $
-+ * $Revision: 1.1.1.1 $
-+ * $Date: 2009-04-17 06:15:34 $
-+ * $Change: 537387 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_DEVICE_ONLY
-+#if !defined(__DWC_HCD_H__)
-+#define __DWC_HCD_H__
-+
-+#include <linux/list.h>
-+#include <linux/usb.h>
-+#include <linux/usb/hcd.h>
-+
-+struct lm_device;
-+struct dwc_otg_device;
-+
-+#include "dwc_otg_cil.h"
-+//#include "dwc_otg_ifx.h" // winder
-+
-+
-+/**
-+ * @file
-+ *
-+ * This file contains the structures, constants, and interfaces for
-+ * the Host Contoller Driver (HCD).
-+ *
-+ * The Host Controller Driver (HCD) is responsible for translating requests
-+ * from the USB Driver into the appropriate actions on the DWC_otg controller.
-+ * It isolates the USBD from the specifics of the controller by providing an
-+ * API to the USBD.
-+ */
-+
-+/**
-+ * Phases for control transfers.
-+ */
-+typedef enum dwc_otg_control_phase {
-+ DWC_OTG_CONTROL_SETUP,
-+ DWC_OTG_CONTROL_DATA,
-+ DWC_OTG_CONTROL_STATUS
-+} dwc_otg_control_phase_e;
-+
-+/** Transaction types. */
-+typedef enum dwc_otg_transaction_type {
-+ DWC_OTG_TRANSACTION_NONE,
-+ DWC_OTG_TRANSACTION_PERIODIC,
-+ DWC_OTG_TRANSACTION_NON_PERIODIC,
-+ DWC_OTG_TRANSACTION_ALL
-+} dwc_otg_transaction_type_e;
-+
-+/**
-+ * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control,
-+ * interrupt, or isochronous transfer. A single QTD is created for each URB
-+ * (of one of these types) submitted to the HCD. The transfer associated with
-+ * a QTD may require one or multiple transactions.
-+ *
-+ * A QTD is linked to a Queue Head, which is entered in either the
-+ * non-periodic or periodic schedule for execution. When a QTD is chosen for
-+ * execution, some or all of its transactions may be executed. After
-+ * execution, the state of the QTD is updated. The QTD may be retired if all
-+ * its transactions are complete or if an error occurred. Otherwise, it
-+ * remains in the schedule so more transactions can be executed later.
-+ */
-+struct dwc_otg_qh;
-+typedef struct dwc_otg_qtd {
-+ /**
-+ * Determines the PID of the next data packet for the data phase of
-+ * control transfers. Ignored for other transfer types.<br>
-+ * One of the following values:
-+ * - DWC_OTG_HC_PID_DATA0
-+ * - DWC_OTG_HC_PID_DATA1
-+ */
-+ uint8_t data_toggle;
-+
-+ /** Current phase for control transfers (Setup, Data, or Status). */
-+ dwc_otg_control_phase_e control_phase;
-+
-+ /** Keep track of the current split type
-+ * for FS/LS endpoints on a HS Hub */
-+ uint8_t complete_split;
-+
-+ /** How many bytes transferred during SSPLIT OUT */
-+ uint32_t ssplit_out_xfer_count;
-+
-+ /**
-+ * Holds the number of bus errors that have occurred for a transaction
-+ * within this transfer.
-+ */
-+ uint8_t error_count;
-+
-+ /**
-+ * Index of the next frame descriptor for an isochronous transfer. A
-+ * frame descriptor describes the buffer position and length of the
-+ * data to be transferred in the next scheduled (micro)frame of an
-+ * isochronous transfer. It also holds status for that transaction.
-+ * The frame index starts at 0.
-+ */
-+ int isoc_frame_index;
-+
-+ /** Position of the ISOC split on full/low speed */
-+ uint8_t isoc_split_pos;
-+
-+ /** Position of the ISOC split in the buffer for the current frame */
-+ uint16_t isoc_split_offset;
-+
-+ /** URB for this transfer */
-+ struct urb *urb;
-+
-+ /** This list of QTDs */
-+ struct list_head qtd_list_entry;
-+
-+ /* Field to track the qh pointer */
-+ struct dwc_otg_qh *qtd_qh_ptr;
-+} dwc_otg_qtd_t;
-+
-+/**
-+ * A Queue Head (QH) holds the static characteristics of an endpoint and
-+ * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
-+ * be entered in either the non-periodic or periodic schedule.
-+ */
-+typedef struct dwc_otg_qh {
-+ /**
-+ * Endpoint type.
-+ * One of the following values:
-+ * - USB_ENDPOINT_XFER_CONTROL
-+ * - USB_ENDPOINT_XFER_ISOC
-+ * - USB_ENDPOINT_XFER_BULK
-+ * - USB_ENDPOINT_XFER_INT
-+ */
-+ uint8_t ep_type;
-+ uint8_t ep_is_in;
-+
-+ /** wMaxPacketSize Field of Endpoint Descriptor. */
-+ uint16_t maxp;
-+
-+ /**
-+ * Determines the PID of the next data packet for non-control
-+ * transfers. Ignored for control transfers.<br>
-+ * One of the following values:
-+ * - DWC_OTG_HC_PID_DATA0
-+ * - DWC_OTG_HC_PID_DATA1
-+ */
-+ uint8_t data_toggle;
-+
-+ /** Ping state if 1. */
-+ uint8_t ping_state;
-+
-+ /**
-+ * List of QTDs for this QH.
-+ */
-+ struct list_head qtd_list;
-+
-+ /** Host channel currently processing transfers for this QH. */
-+ dwc_hc_t *channel;
-+
-+ /** QTD currently assigned to a host channel for this QH. */
-+ dwc_otg_qtd_t *qtd_in_process;
-+
-+ /** Full/low speed endpoint on high-speed hub requires split. */
-+ uint8_t do_split;
-+
-+ /** @name Periodic schedule information */
-+ /** @{ */
-+
-+ /** Bandwidth in microseconds per (micro)frame. */
-+ uint8_t usecs;
-+
-+ /** Interval between transfers in (micro)frames. */
-+ uint16_t interval;
-+
-+ /**
-+ * (micro)frame to initialize a periodic transfer. The transfer
-+ * executes in the following (micro)frame.
-+ */
-+ uint16_t sched_frame;
-+
-+ /** (micro)frame at which last start split was initialized. */
-+ uint16_t start_split_frame;
-+
-+ /** @} */
-+
-+ uint16_t speed;
-+ uint16_t frame_usecs[8];
-+ /** Entry for QH in either the periodic or non-periodic schedule. */
-+ struct list_head qh_list_entry;
-+} dwc_otg_qh_t;
-+
-+/**
-+ * This structure holds the state of the HCD, including the non-periodic and
-+ * periodic schedules.
-+ */
-+typedef struct dwc_otg_hcd {
-+ spinlock_t lock;
-+
-+ /** DWC OTG Core Interface Layer */
-+ dwc_otg_core_if_t *core_if;
-+
-+ /** Internal DWC HCD Flags */
-+ volatile union dwc_otg_hcd_internal_flags {
-+ uint32_t d32;
-+ struct {
-+ unsigned port_connect_status_change : 1;
-+ unsigned port_connect_status : 1;
-+ unsigned port_reset_change : 1;
-+ unsigned port_enable_change : 1;
-+ unsigned port_suspend_change : 1;
-+ unsigned port_over_current_change : 1;
-+ unsigned reserved : 27;
-+ } b;
-+ } flags;
-+
-+ /**
-+ * Inactive items in the non-periodic schedule. This is a list of
-+ * Queue Heads. Transfers associated with these Queue Heads are not
-+ * currently assigned to a host channel.
-+ */
-+ struct list_head non_periodic_sched_inactive;
-+
-+ /**
-+ * Deferred items in the non-periodic schedule. This is a list of
-+ * Queue Heads. Transfers associated with these Queue Heads are not
-+ * currently assigned to a host channel.
-+ * When we get an NAK, the QH goes here.
-+ */
-+ struct list_head non_periodic_sched_deferred;
-+
-+ /**
-+ * Active items in the non-periodic schedule. This is a list of
-+ * Queue Heads. Transfers associated with these Queue Heads are
-+ * currently assigned to a host channel.
-+ */
-+ struct list_head non_periodic_sched_active;
-+
-+ /**
-+ * Pointer to the next Queue Head to process in the active
-+ * non-periodic schedule.
-+ */
-+ struct list_head *non_periodic_qh_ptr;
-+
-+ /**
-+ * Inactive items in the periodic schedule. This is a list of QHs for
-+ * periodic transfers that are _not_ scheduled for the next frame.
-+ * Each QH in the list has an interval counter that determines when it
-+ * needs to be scheduled for execution. This scheduling mechanism
-+ * allows only a simple calculation for periodic bandwidth used (i.e.
-+ * must assume that all periodic transfers may need to execute in the
-+ * same frame). However, it greatly simplifies scheduling and should
-+ * be sufficient for the vast majority of OTG hosts, which need to
-+ * connect to a small number of peripherals at one time.
-+ *
-+ * Items move from this list to periodic_sched_ready when the QH
-+ * interval counter is 0 at SOF.
-+ */
-+ struct list_head periodic_sched_inactive;
-+
-+ /**
-+ * List of periodic QHs that are ready for execution in the next
-+ * frame, but have not yet been assigned to host channels.
-+ *
-+ * Items move from this list to periodic_sched_assigned as host
-+ * channels become available during the current frame.
-+ */
-+ struct list_head periodic_sched_ready;
-+
-+ /**
-+ * List of periodic QHs to be executed in the next frame that are
-+ * assigned to host channels.
-+ *
-+ * Items move from this list to periodic_sched_queued as the
-+ * transactions for the QH are queued to the DWC_otg controller.
-+ */
-+ struct list_head periodic_sched_assigned;
-+
-+ /**
-+ * List of periodic QHs that have been queued for execution.
-+ *
-+ * Items move from this list to either periodic_sched_inactive or
-+ * periodic_sched_ready when the channel associated with the transfer
-+ * is released. If the interval for the QH is 1, the item moves to
-+ * periodic_sched_ready because it must be rescheduled for the next
-+ * frame. Otherwise, the item moves to periodic_sched_inactive.
-+ */
-+ struct list_head periodic_sched_queued;
-+
-+ /**
-+ * Total bandwidth claimed so far for periodic transfers. This value
-+ * is in microseconds per (micro)frame. The assumption is that all
-+ * periodic transfers may occur in the same (micro)frame.
-+ */
-+ uint16_t periodic_usecs;
-+
-+ /**
-+ * Total bandwidth claimed so far for all periodic transfers
-+ * in a frame.
-+ * This will include a mixture of HS and FS transfers.
-+ * Units are microseconds per (micro)frame.
-+ * We have a budget per frame and have to schedule
-+ * transactions accordingly.
-+ * Watch out for the fact that things are actually scheduled for the
-+ * "next frame".
-+ */
-+ uint16_t frame_usecs[8];
-+
-+ /**
-+ * Frame number read from the core at SOF. The value ranges from 0 to
-+ * DWC_HFNUM_MAX_FRNUM.
-+ */
-+ uint16_t frame_number;
-+
-+ /**
-+ * Free host channels in the controller. This is a list of
-+ * dwc_hc_t items.
-+ */
-+ struct list_head free_hc_list;
-+
-+ /**
-+ * Number of available host channels.
-+ */
-+ int available_host_channels;
-+
-+ /**
-+ * Array of pointers to the host channel descriptors. Allows accessing
-+ * a host channel descriptor given the host channel number. This is
-+ * useful in interrupt handlers.
-+ */
-+ dwc_hc_t *hc_ptr_array[MAX_EPS_CHANNELS];
-+
-+ /**
-+ * Buffer to use for any data received during the status phase of a
-+ * control transfer. Normally no data is transferred during the status
-+ * phase. This buffer is used as a bit bucket.
-+ */
-+ uint8_t *status_buf;
-+
-+ /**
-+ * DMA address for status_buf.
-+ */
-+ dma_addr_t status_buf_dma;
-+#define DWC_OTG_HCD_STATUS_BUF_SIZE 64
-+
-+ /**
-+ * Structure to allow starting the HCD in a non-interrupt context
-+ * during an OTG role change.
-+ */
-+ struct work_struct start_work;
-+ struct usb_hcd *_p;
-+
-+ /**
-+ * Connection timer. An OTG host must display a message if the device
-+ * does not connect. Started when the VBus power is turned on via
-+ * sysfs attribute "buspower".
-+ */
-+ struct timer_list conn_timer;
-+
-+ /* Tasket to do a reset */
-+ struct tasklet_struct *reset_tasklet;
-+
-+#ifdef DEBUG
-+ uint32_t frrem_samples;
-+ uint64_t frrem_accum;
-+
-+ uint32_t hfnum_7_samples_a;
-+ uint64_t hfnum_7_frrem_accum_a;
-+ uint32_t hfnum_0_samples_a;
-+ uint64_t hfnum_0_frrem_accum_a;
-+ uint32_t hfnum_other_samples_a;
-+ uint64_t hfnum_other_frrem_accum_a;
-+
-+ uint32_t hfnum_7_samples_b;
-+ uint64_t hfnum_7_frrem_accum_b;
-+ uint32_t hfnum_0_samples_b;
-+ uint64_t hfnum_0_frrem_accum_b;
-+ uint32_t hfnum_other_samples_b;
-+ uint64_t hfnum_other_frrem_accum_b;
-+#endif
-+
-+} dwc_otg_hcd_t;
-+
-+/** Gets the dwc_otg_hcd from a struct usb_hcd */
-+static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd)
-+{
-+ return (dwc_otg_hcd_t *)(hcd->hcd_priv);
-+}
-+
-+/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */
-+static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t *dwc_otg_hcd)
-+{
-+ return container_of((void *)dwc_otg_hcd, struct usb_hcd, hcd_priv);
-+}
-+
-+/** @name HCD Create/Destroy Functions */
-+/** @{ */
-+extern int __devinit dwc_otg_hcd_init(struct device *_dev, dwc_otg_device_t * dwc_otg_device);
-+extern void dwc_otg_hcd_remove(struct device *_dev);
-+/** @} */
-+
-+/** @name Linux HC Driver API Functions */
-+/** @{ */
-+
-+extern int dwc_otg_hcd_start(struct usb_hcd *hcd);
-+extern void dwc_otg_hcd_stop(struct usb_hcd *hcd);
-+extern int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd);
-+extern void dwc_otg_hcd_free(struct usb_hcd *hcd);
-+
-+extern int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd,
-+ struct urb *urb,
-+ gfp_t mem_flags);
-+extern int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd,
-+ struct urb *urb,
-+ int status);
-+extern irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd);
-+
-+extern void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd,
-+ struct usb_host_endpoint *ep);
-+
-+extern int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd,
-+ char *buf);
-+extern int dwc_otg_hcd_hub_control(struct usb_hcd *hcd,
-+ u16 typeReq,
-+ u16 wValue,
-+ u16 wIndex,
-+ char *buf,
-+ u16 wLength);
-+
-+/** @} */
-+
-+/** @name Transaction Execution Functions */
-+/** @{ */
-+extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *_hcd);
-+extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *_hcd,
-+ dwc_otg_transaction_type_e _tr_type);
-+extern void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *_hcd, struct urb *_urb,
-+ int _status);
-+/** @} */
-+
-+/** @name Interrupt Handler Functions */
-+/** @{ */
-+extern int32_t dwc_otg_hcd_handle_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_sof_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t *_dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_port_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_disconnect_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_hc_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_hc_n_intr (dwc_otg_hcd_t *_dwc_otg_hcd, uint32_t _num);
-+extern int32_t dwc_otg_hcd_handle_session_req_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr (dwc_otg_hcd_t *_dwc_otg_hcd);
-+/** @} */
-+
-+
-+/** @name Schedule Queue Functions */
-+/** @{ */
-+
-+/* Implemented in dwc_otg_hcd_queue.c */
-+extern dwc_otg_qh_t *dwc_otg_hcd_qh_create (dwc_otg_hcd_t *_hcd, struct urb *_urb);
-+extern void dwc_otg_hcd_qh_init (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, struct urb *_urb);
-+extern void dwc_otg_hcd_qh_free (dwc_otg_qh_t *_qh);
-+extern int dwc_otg_hcd_qh_add (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh);
-+extern void dwc_otg_hcd_qh_remove (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh);
-+extern void dwc_otg_hcd_qh_deactivate (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, int sched_csplit);
-+extern int dwc_otg_hcd_qh_deferr (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, int delay);
-+
-+/** Remove and free a QH */
-+static inline void dwc_otg_hcd_qh_remove_and_free (dwc_otg_hcd_t *_hcd,
-+ dwc_otg_qh_t *_qh)
-+{
-+ dwc_otg_hcd_qh_remove (_hcd, _qh);
-+ dwc_otg_hcd_qh_free (_qh);
-+}
-+
-+/** Allocates memory for a QH structure.
-+ * @return Returns the memory allocate or NULL on error. */
-+static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc (void)
-+{
-+#ifdef _SC_BUILD_
-+ return (dwc_otg_qh_t *) kmalloc (sizeof(dwc_otg_qh_t), GFP_ATOMIC);
-+#else
-+ return (dwc_otg_qh_t *) kmalloc (sizeof(dwc_otg_qh_t), GFP_KERNEL);
-+#endif
-+}
-+
-+extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create (struct urb *urb);
-+extern void dwc_otg_hcd_qtd_init (dwc_otg_qtd_t *qtd, struct urb *urb);
-+extern int dwc_otg_hcd_qtd_add (dwc_otg_qtd_t *qtd, dwc_otg_hcd_t *dwc_otg_hcd);
-+
-+/** Allocates memory for a QTD structure.
-+ * @return Returns the memory allocate or NULL on error. */
-+static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc (void)
-+{
-+#ifdef _SC_BUILD_
-+ return (dwc_otg_qtd_t *) kmalloc (sizeof(dwc_otg_qtd_t), GFP_ATOMIC);
-+#else
-+ return (dwc_otg_qtd_t *) kmalloc (sizeof(dwc_otg_qtd_t), GFP_KERNEL);
-+#endif
-+}
-+
-+/** Frees the memory for a QTD structure. QTD should already be removed from
-+ * list.
-+ * @param[in] _qtd QTD to free.*/
-+static inline void dwc_otg_hcd_qtd_free (dwc_otg_qtd_t *_qtd)
-+{
-+ kfree (_qtd);
-+}
-+
-+/** Removes a QTD from list.
-+ * @param[in] _qtd QTD to remove from list. */
-+static inline void dwc_otg_hcd_qtd_remove (dwc_otg_qtd_t *_qtd)
-+{
-+ unsigned long flags;
-+ local_irq_save (flags);
-+ list_del (&_qtd->qtd_list_entry);
-+ local_irq_restore (flags);
-+}
-+
-+/** Remove and free a QTD */
-+static inline void dwc_otg_hcd_qtd_remove_and_free (dwc_otg_qtd_t *_qtd)
-+{
-+ dwc_otg_hcd_qtd_remove (_qtd);
-+ dwc_otg_hcd_qtd_free (_qtd);
-+}
-+
-+/** @} */
-+
-+
-+/** @name Internal Functions */
-+/** @{ */
-+dwc_otg_qh_t *dwc_urb_to_qh(struct urb *_urb);
-+void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *_hcd);
-+void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *_hcd);
-+/** @} */
-+
-+
-+/** Gets the usb_host_endpoint associated with an URB. */
-+static inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *_urb)
-+{
-+ struct usb_device *dev = _urb->dev;
-+ int ep_num = usb_pipeendpoint(_urb->pipe);
-+ if (usb_pipein(_urb->pipe))
-+ return dev->ep_in[ep_num];
-+ else
-+ return dev->ep_out[ep_num];
-+}
-+
-+/**
-+ * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is
-+ * qualified with its direction (possible 32 endpoints per device).
-+ */
-+#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) \
-+ ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \
-+ ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4)
-+
-+/** Gets the QH that contains the list_head */
-+#define dwc_list_to_qh(_list_head_ptr_) (container_of(_list_head_ptr_,dwc_otg_qh_t,qh_list_entry))
-+
-+/** Gets the QTD that contains the list_head */
-+#define dwc_list_to_qtd(_list_head_ptr_) (container_of(_list_head_ptr_,dwc_otg_qtd_t,qtd_list_entry))
-+
-+/** Check if QH is non-periodic */
-+#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == USB_ENDPOINT_XFER_BULK) || \
-+ (_qh_ptr_->ep_type == USB_ENDPOINT_XFER_CONTROL))
-+
-+/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */
-+#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
-+
-+/** Packet size for any kind of endpoint descriptor */
-+#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
-+
-+/**
-+ * Returns true if _frame1 is less than or equal to _frame2. The comparison is
-+ * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the
-+ * frame number when the max frame number is reached.
-+ */
-+static inline int dwc_frame_num_le(uint16_t _frame1, uint16_t _frame2)
-+{
-+ return ((_frame2 - _frame1) & DWC_HFNUM_MAX_FRNUM) <=
-+ (DWC_HFNUM_MAX_FRNUM >> 1);
-+}
-+
-+/**
-+ * Returns true if _frame1 is greater than _frame2. The comparison is done
-+ * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame
-+ * number when the max frame number is reached.
-+ */
-+static inline int dwc_frame_num_gt(uint16_t _frame1, uint16_t _frame2)
-+{
-+ return (_frame1 != _frame2) &&
-+ (((_frame1 - _frame2) & DWC_HFNUM_MAX_FRNUM) <
-+ (DWC_HFNUM_MAX_FRNUM >> 1));
-+}
-+
-+/**
-+ * Increments _frame by the amount specified by _inc. The addition is done
-+ * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value.
-+ */
-+static inline uint16_t dwc_frame_num_inc(uint16_t _frame, uint16_t _inc)
-+{
-+ return (_frame + _inc) & DWC_HFNUM_MAX_FRNUM;
-+}
-+
-+static inline uint16_t dwc_full_frame_num (uint16_t _frame)
-+{
-+ return ((_frame) & DWC_HFNUM_MAX_FRNUM) >> 3;
-+}
-+
-+static inline uint16_t dwc_micro_frame_num (uint16_t _frame)
-+{
-+ return (_frame) & 0x7;
-+}
-+
-+#ifdef DEBUG
-+/**
-+ * Macro to sample the remaining PHY clocks left in the current frame. This
-+ * may be used during debugging to determine the average time it takes to
-+ * execute sections of code. There are two possible sample points, "a" and
-+ * "b", so the _letter argument must be one of these values.
-+ *
-+ * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For
-+ * example, "cat /sys/devices/lm0/hcd_frrem".
-+ */
-+#define dwc_sample_frrem(_hcd, _qh, _letter) \
-+{ \
-+ hfnum_data_t hfnum; \
-+ dwc_otg_qtd_t *qtd; \
-+ qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \
-+ if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \
-+ hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum); \
-+ switch (hfnum.b.frnum & 0x7) { \
-+ case 7: \
-+ _hcd->hfnum_7_samples_##_letter++; \
-+ _hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \
-+ break; \
-+ case 0: \
-+ _hcd->hfnum_0_samples_##_letter++; \
-+ _hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \
-+ break; \
-+ default: \
-+ _hcd->hfnum_other_samples_##_letter++; \
-+ _hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \
-+ break; \
-+ } \
-+ } \
-+}
-+#else // DEBUG
-+#define dwc_sample_frrem(_hcd, _qh, _letter)
-+#endif // DEBUG
-+#endif // __DWC_HCD_H__
-+#endif /* DWC_DEVICE_ONLY */
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
-@@ -0,0 +1,1841 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd_intr.c $
-+ * $Revision: 1.1.1.1 $
-+ * $Date: 2009-04-17 06:15:34 $
-+ * $Change: 553126 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_DEVICE_ONLY
-+
-+#include "dwc_otg_driver.h"
-+#include "dwc_otg_hcd.h"
-+#include "dwc_otg_regs.h"
-+
-+const int erratum_usb09_patched = 0;
-+const int deferral_on = 1;
-+const int nak_deferral_delay = 8;
-+const int nyet_deferral_delay = 1;
-+/** @file
-+ * This file contains the implementation of the HCD Interrupt handlers.
-+ */
-+
-+/** This function handles interrupts for the HCD. */
-+int32_t dwc_otg_hcd_handle_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
-+{
-+ int retval = 0;
-+
-+ dwc_otg_core_if_t *core_if = _dwc_otg_hcd->core_if;
-+ gintsts_data_t gintsts;
-+#ifdef DEBUG
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+#endif
-+
-+ /* Check if HOST Mode */
-+ if (dwc_otg_is_host_mode(core_if)) {
-+ gintsts.d32 = dwc_otg_read_core_intr(core_if);
-+ if (!gintsts.d32) {
-+ return 0;
-+ }
-+
-+#ifdef DEBUG
-+ /* Don't print debug message in the interrupt handler on SOF */
-+# ifndef DEBUG_SOF
-+ if (gintsts.d32 != DWC_SOF_INTR_MASK)
-+# endif
-+ DWC_DEBUGPL (DBG_HCD, "\n");
-+#endif
-+
-+#ifdef DEBUG
-+# ifndef DEBUG_SOF
-+ if (gintsts.d32 != DWC_SOF_INTR_MASK)
-+# endif
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x\n", gintsts.d32);
-+#endif
-+
-+ if (gintsts.b.sofintr) {
-+ retval |= dwc_otg_hcd_handle_sof_intr (_dwc_otg_hcd);
-+ }
-+ if (gintsts.b.rxstsqlvl) {
-+ retval |= dwc_otg_hcd_handle_rx_status_q_level_intr (_dwc_otg_hcd);
-+ }
-+ if (gintsts.b.nptxfempty) {
-+ retval |= dwc_otg_hcd_handle_np_tx_fifo_empty_intr (_dwc_otg_hcd);
-+ }
-+ if (gintsts.b.i2cintr) {
-+ /** @todo Implement i2cintr handler. */
-+ }
-+ if (gintsts.b.portintr) {
-+ retval |= dwc_otg_hcd_handle_port_intr (_dwc_otg_hcd);
-+ }
-+ if (gintsts.b.hcintr) {
-+ retval |= dwc_otg_hcd_handle_hc_intr (_dwc_otg_hcd);
-+ }
-+ if (gintsts.b.ptxfempty) {
-+ retval |= dwc_otg_hcd_handle_perio_tx_fifo_empty_intr (_dwc_otg_hcd);
-+ }
-+#ifdef DEBUG
-+# ifndef DEBUG_SOF
-+ if (gintsts.d32 != DWC_SOF_INTR_MASK)
-+# endif
-+ {
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Finished Servicing Interrupts\n");
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n",
-+ dwc_read_reg32(&global_regs->gintsts));
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n",
-+ dwc_read_reg32(&global_regs->gintmsk));
-+ }
-+#endif
-+
-+#ifdef DEBUG
-+# ifndef DEBUG_SOF
-+ if (gintsts.d32 != DWC_SOF_INTR_MASK)
-+# endif
-+ DWC_DEBUGPL (DBG_HCD, "\n");
-+#endif
-+
-+ }
-+
-+ return retval;
-+}
-+
-+#ifdef DWC_TRACK_MISSED_SOFS
-+#warning Compiling code to track missed SOFs
-+#define FRAME_NUM_ARRAY_SIZE 1000
-+/**
-+ * This function is for debug only.
-+ */
-+static inline void track_missed_sofs(uint16_t _curr_frame_number) {
-+ static uint16_t frame_num_array[FRAME_NUM_ARRAY_SIZE];
-+ static uint16_t last_frame_num_array[FRAME_NUM_ARRAY_SIZE];
-+ static int frame_num_idx = 0;
-+ static uint16_t last_frame_num = DWC_HFNUM_MAX_FRNUM;
-+ static int dumped_frame_num_array = 0;
-+
-+ if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) {
-+ if ((((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) != _curr_frame_number)) {
-+ frame_num_array[frame_num_idx] = _curr_frame_number;
-+ last_frame_num_array[frame_num_idx++] = last_frame_num;
-+ }
-+ } else if (!dumped_frame_num_array) {
-+ int i;
-+ printk(KERN_EMERG USB_DWC "Frame Last Frame\n");
-+ printk(KERN_EMERG USB_DWC "----- ----------\n");
-+ for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) {
-+ printk(KERN_EMERG USB_DWC "0x%04x 0x%04x\n",
-+ frame_num_array[i], last_frame_num_array[i]);
-+ }
-+ dumped_frame_num_array = 1;
-+ }
-+ last_frame_num = _curr_frame_number;
-+}
-+#endif
-+
-+/**
-+ * Handles the start-of-frame interrupt in host mode. Non-periodic
-+ * transactions may be queued to the DWC_otg controller for the current
-+ * (micro)frame. Periodic transactions may be queued to the controller for the
-+ * next (micro)frame.
-+ */
-+int32_t dwc_otg_hcd_handle_sof_intr (dwc_otg_hcd_t *_hcd)
-+{
-+ hfnum_data_t hfnum;
-+ struct list_head *qh_entry;
-+ dwc_otg_qh_t *qh;
-+ dwc_otg_transaction_type_e tr_type;
-+ gintsts_data_t gintsts = {.d32 = 0};
-+
-+ hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum);
-+
-+#ifdef DEBUG_SOF
-+ DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n");
-+#endif
-+
-+ _hcd->frame_number = hfnum.b.frnum;
-+
-+#ifdef DEBUG
-+ _hcd->frrem_accum += hfnum.b.frrem;
-+ _hcd->frrem_samples++;
-+#endif
-+
-+#ifdef DWC_TRACK_MISSED_SOFS
-+ track_missed_sofs(_hcd->frame_number);
-+#endif
-+
-+ /* Determine whether any periodic QHs should be executed. */
-+ qh_entry = _hcd->periodic_sched_inactive.next;
-+ while (qh_entry != &_hcd->periodic_sched_inactive) {
-+ qh = list_entry(qh_entry, dwc_otg_qh_t, qh_list_entry);
-+ qh_entry = qh_entry->next;
-+ if (dwc_frame_num_le(qh->sched_frame, _hcd->frame_number)) {
-+ /*
-+ * Move QH to the ready list to be executed next
-+ * (micro)frame.
-+ */
-+ list_move(&qh->qh_list_entry, &_hcd->periodic_sched_ready);
-+ }
-+ }
-+
-+ tr_type = dwc_otg_hcd_select_transactions(_hcd);
-+ if (tr_type != DWC_OTG_TRANSACTION_NONE) {
-+ dwc_otg_hcd_queue_transactions(_hcd, tr_type);
-+ }
-+
-+ /* Clear interrupt */
-+ gintsts.b.sofintr = 1;
-+ dwc_write_reg32(&_hcd->core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at
-+ * least one packet in the Rx FIFO. The packets are moved from the FIFO to
-+ * memory if the DWC_otg controller is operating in Slave mode. */
-+int32_t dwc_otg_hcd_handle_rx_status_q_level_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
-+{
-+ host_grxsts_data_t grxsts;
-+ dwc_hc_t *hc = NULL;
-+
-+ DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n");
-+
-+ grxsts.d32 = dwc_read_reg32(&_dwc_otg_hcd->core_if->core_global_regs->grxstsp);
-+
-+ hc = _dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum];
-+
-+ /* Packet Status */
-+ DWC_DEBUGPL(DBG_HCDV, " Ch num = %d\n", grxsts.b.chnum);
-+ DWC_DEBUGPL(DBG_HCDV, " Count = %d\n", grxsts.b.bcnt);
-+ DWC_DEBUGPL(DBG_HCDV, " DPID = %d, hc.dpid = %d\n", grxsts.b.dpid, hc->data_pid_start);
-+ DWC_DEBUGPL(DBG_HCDV, " PStatus = %d\n", grxsts.b.pktsts);
-+
-+ switch (grxsts.b.pktsts) {
-+ case DWC_GRXSTS_PKTSTS_IN:
-+ /* Read the data into the host buffer. */
-+ if (grxsts.b.bcnt > 0) {
-+ dwc_otg_read_packet(_dwc_otg_hcd->core_if,
-+ hc->xfer_buff,
-+ grxsts.b.bcnt);
-+
-+ /* Update the HC fields for the next packet received. */
-+ hc->xfer_count += grxsts.b.bcnt;
-+ hc->xfer_buff += grxsts.b.bcnt;
-+ }
-+
-+ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
-+ case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR:
-+ case DWC_GRXSTS_PKTSTS_CH_HALTED:
-+ /* Handled in interrupt, just ignore data */
-+ break;
-+ default:
-+ DWC_ERROR ("RX_STS_Q Interrupt: Unknown status %d\n", grxsts.b.pktsts);
-+ break;
-+ }
-+
-+ return 1;
-+}
-+
-+/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More
-+ * data packets may be written to the FIFO for OUT transfers. More requests
-+ * may be written to the non-periodic request queue for IN transfers. This
-+ * interrupt is enabled only in Slave mode. */
-+int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n");
-+ dwc_otg_hcd_queue_transactions(_dwc_otg_hcd,
-+ DWC_OTG_TRANSACTION_NON_PERIODIC);
-+ return 1;
-+}
-+
-+/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data
-+ * packets may be written to the FIFO for OUT transfers. More requests may be
-+ * written to the periodic request queue for IN transfers. This interrupt is
-+ * enabled only in Slave mode. */
-+int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n");
-+ dwc_otg_hcd_queue_transactions(_dwc_otg_hcd,
-+ DWC_OTG_TRANSACTION_PERIODIC);
-+ return 1;
-+}
-+
-+/** There are multiple conditions that can cause a port interrupt. This function
-+ * determines which interrupt conditions have occurred and handles them
-+ * appropriately. */
-+int32_t dwc_otg_hcd_handle_port_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
-+{
-+ int retval = 0;
-+ hprt0_data_t hprt0;
-+ hprt0_data_t hprt0_modify;
-+
-+ hprt0.d32 = dwc_read_reg32(_dwc_otg_hcd->core_if->host_if->hprt0);
-+ hprt0_modify.d32 = dwc_read_reg32(_dwc_otg_hcd->core_if->host_if->hprt0);
-+
-+ /* Clear appropriate bits in HPRT0 to clear the interrupt bit in
-+ * GINTSTS */
-+
-+ hprt0_modify.b.prtena = 0;
-+ hprt0_modify.b.prtconndet = 0;
-+ hprt0_modify.b.prtenchng = 0;
-+ hprt0_modify.b.prtovrcurrchng = 0;
-+
-+ /* Port Connect Detected
-+ * Set flag and clear if detected */
-+ if (hprt0.b.prtconndet) {
-+ DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x "
-+ "Port Connect Detected--\n", hprt0.d32);
-+ _dwc_otg_hcd->flags.b.port_connect_status_change = 1;
-+ _dwc_otg_hcd->flags.b.port_connect_status = 1;
-+ hprt0_modify.b.prtconndet = 1;
-+
-+ /* B-Device has connected, Delete the connection timer. */
-+ del_timer( &_dwc_otg_hcd->conn_timer );
-+
-+ /* The Hub driver asserts a reset when it sees port connect
-+ * status change flag */
-+ retval |= 1;
-+ }
-+
-+ /* Port Enable Changed
-+ * Clear if detected - Set internal flag if disabled */
-+ if (hprt0.b.prtenchng) {
-+ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x "
-+ "Port Enable Changed--\n", hprt0.d32);
-+ hprt0_modify.b.prtenchng = 1;
-+ if (hprt0.b.prtena == 1) {
-+ int do_reset = 0;
-+ dwc_otg_core_params_t *params = _dwc_otg_hcd->core_if->core_params;
-+ dwc_otg_core_global_regs_t *global_regs = _dwc_otg_hcd->core_if->core_global_regs;
-+ dwc_otg_host_if_t *host_if = _dwc_otg_hcd->core_if->host_if;
-+
-+ /* Check if we need to adjust the PHY clock speed for
-+ * low power and adjust it */
-+ if (params->host_support_fs_ls_low_power)
-+ {
-+ gusbcfg_data_t usbcfg;
-+
-+ usbcfg.d32 = dwc_read_reg32 (&global_regs->gusbcfg);
-+
-+ if ((hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) ||
-+ (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_FULL_SPEED))
-+ {
-+ /*
-+ * Low power
-+ */
-+ hcfg_data_t hcfg;
-+ if (usbcfg.b.phylpwrclksel == 0) {
-+ /* Set PHY low power clock select for FS/LS devices */
-+ usbcfg.b.phylpwrclksel = 1;
-+ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
-+ do_reset = 1;
-+ }
-+
-+ hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
-+
-+ if ((hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) &&
-+ (params->host_ls_low_power_phy_clk ==
-+ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ))
-+ {
-+ /* 6 MHZ */
-+ DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 6 MHz (Low Power)\n");
-+ if (hcfg.b.fslspclksel != DWC_HCFG_6_MHZ) {
-+ hcfg.b.fslspclksel = DWC_HCFG_6_MHZ;
-+ dwc_write_reg32(&host_if->host_global_regs->hcfg,
-+ hcfg.d32);
-+ do_reset = 1;
-+ }
-+ }
-+ else {
-+ /* 48 MHZ */
-+ DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 48 MHz ()\n");
-+ if (hcfg.b.fslspclksel != DWC_HCFG_48_MHZ) {
-+ hcfg.b.fslspclksel = DWC_HCFG_48_MHZ;
-+ dwc_write_reg32(&host_if->host_global_regs->hcfg,
-+ hcfg.d32);
-+ do_reset = 1;
-+ }
-+ }
-+ }
-+ else {
-+ /*
-+ * Not low power
-+ */
-+ if (usbcfg.b.phylpwrclksel == 1) {
-+ usbcfg.b.phylpwrclksel = 0;
-+ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
-+ do_reset = 1;
-+ }
-+ }
-+
-+ if (do_reset) {
-+ tasklet_schedule(_dwc_otg_hcd->reset_tasklet);
-+ }
-+ }
-+
-+ if (!do_reset) {
-+ /* Port has been enabled set the reset change flag */
-+ _dwc_otg_hcd->flags.b.port_reset_change = 1;
-+ }
-+
-+ } else {
-+ _dwc_otg_hcd->flags.b.port_enable_change = 1;
-+ }
-+ retval |= 1;
-+ }
-+
-+ /** Overcurrent Change Interrupt */
-+ if (hprt0.b.prtovrcurrchng) {
-+ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x "
-+ "Port Overcurrent Changed--\n", hprt0.d32);
-+ _dwc_otg_hcd->flags.b.port_over_current_change = 1;
-+ hprt0_modify.b.prtovrcurrchng = 1;
-+ retval |= 1;
-+ }
-+
-+ /* Clear Port Interrupts */
-+ dwc_write_reg32(_dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32);
-+
-+ return retval;
-+}
-+
-+
-+/** This interrupt indicates that one or more host channels has a pending
-+ * interrupt. There are multiple conditions that can cause each host channel
-+ * interrupt. This function determines which conditions have occurred for each
-+ * host channel interrupt and handles them appropriately. */
-+int32_t dwc_otg_hcd_handle_hc_intr (dwc_otg_hcd_t *_dwc_otg_hcd)
-+{
-+ int i;
-+ int retval = 0;
-+ haint_data_t haint;
-+
-+ /* Clear appropriate bits in HCINTn to clear the interrupt bit in
-+ * GINTSTS */
-+
-+ haint.d32 = dwc_otg_read_host_all_channels_intr(_dwc_otg_hcd->core_if);
-+
-+ for (i=0; i<_dwc_otg_hcd->core_if->core_params->host_channels; i++) {
-+ if (haint.b2.chint & (1 << i)) {
-+ retval |= dwc_otg_hcd_handle_hc_n_intr (_dwc_otg_hcd, i);
-+ }
-+ }
-+
-+ return retval;
-+}
-+
-+/* Macro used to clear one channel interrupt */
-+#define clear_hc_int(_hc_regs_,_intr_) \
-+do { \
-+ hcint_data_t hcint_clear = {.d32 = 0}; \
-+ hcint_clear.b._intr_ = 1; \
-+ dwc_write_reg32(&((_hc_regs_)->hcint), hcint_clear.d32); \
-+} while (0)
-+
-+/*
-+ * Macro used to disable one channel interrupt. Channel interrupts are
-+ * disabled when the channel is halted or released by the interrupt handler.
-+ * There is no need to handle further interrupts of that type until the
-+ * channel is re-assigned. In fact, subsequent handling may cause crashes
-+ * because the channel structures are cleaned up when the channel is released.
-+ */
-+#define disable_hc_int(_hc_regs_,_intr_) \
-+do { \
-+ hcintmsk_data_t hcintmsk = {.d32 = 0}; \
-+ hcintmsk.b._intr_ = 1; \
-+ dwc_modify_reg32(&((_hc_regs_)->hcintmsk), hcintmsk.d32, 0); \
-+} while (0)
-+
-+/**
-+ * Gets the actual length of a transfer after the transfer halts. _halt_status
-+ * holds the reason for the halt.
-+ *
-+ * For IN transfers where _halt_status is DWC_OTG_HC_XFER_COMPLETE,
-+ * *_short_read is set to 1 upon return if less than the requested
-+ * number of bytes were transferred. Otherwise, *_short_read is set to 0 upon
-+ * return. _short_read may also be NULL on entry, in which case it remains
-+ * unchanged.
-+ */
-+static uint32_t get_actual_xfer_length(dwc_hc_t *_hc,
-+ dwc_otg_hc_regs_t *_hc_regs,
-+ dwc_otg_qtd_t *_qtd,
-+ dwc_otg_halt_status_e _halt_status,
-+ int *_short_read)
-+{
-+ hctsiz_data_t hctsiz;
-+ uint32_t length;
-+
-+ if (_short_read != NULL) {
-+ *_short_read = 0;
-+ }
-+ hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
-+
-+ if (_halt_status == DWC_OTG_HC_XFER_COMPLETE) {
-+ if (_hc->ep_is_in) {
-+ length = _hc->xfer_len - hctsiz.b.xfersize;
-+ if (_short_read != NULL) {
-+ *_short_read = (hctsiz.b.xfersize != 0);
-+ }
-+ } else if (_hc->qh->do_split) {
-+ length = _qtd->ssplit_out_xfer_count;
-+ } else {
-+ length = _hc->xfer_len;
-+ }
-+ } else {
-+ /*
-+ * Must use the hctsiz.pktcnt field to determine how much data
-+ * has been transferred. This field reflects the number of
-+ * packets that have been transferred via the USB. This is
-+ * always an integral number of packets if the transfer was
-+ * halted before its normal completion. (Can't use the
-+ * hctsiz.xfersize field because that reflects the number of
-+ * bytes transferred via the AHB, not the USB).
-+ */
-+ length = (_hc->start_pkt_count - hctsiz.b.pktcnt) * _hc->max_packet;
-+ }
-+
-+ return length;
-+}
-+
-+/**
-+ * Updates the state of the URB after a Transfer Complete interrupt on the
-+ * host channel. Updates the actual_length field of the URB based on the
-+ * number of bytes transferred via the host channel. Sets the URB status
-+ * if the data transfer is finished.
-+ *
-+ * @return 1 if the data transfer specified by the URB is completely finished,
-+ * 0 otherwise.
-+ */
-+static int update_urb_state_xfer_comp(dwc_hc_t *_hc,
-+ dwc_otg_hc_regs_t * _hc_regs, struct urb *_urb,
-+ dwc_otg_qtd_t * _qtd, int *status)
-+{
-+ int xfer_done = 0;
-+ int short_read = 0;
-+
-+ _urb->actual_length += get_actual_xfer_length(_hc, _hc_regs, _qtd,
-+ DWC_OTG_HC_XFER_COMPLETE,
-+ &short_read);
-+
-+ if (short_read || (_urb->actual_length == _urb->transfer_buffer_length)) {
-+ xfer_done = 1;
-+ if (short_read && (_urb->transfer_flags & URB_SHORT_NOT_OK)) {
-+ *status = -EREMOTEIO;
-+ } else {
-+ *status = 0;
-+ }
-+ }
-+
-+#ifdef DEBUG
-+ {
-+ hctsiz_data_t hctsiz;
-+ hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
-+ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
-+ __func__, (_hc->ep_is_in ? "IN" : "OUT"), _hc->hc_num);
-+ DWC_DEBUGPL(DBG_HCDV, " hc->xfer_len %d\n", _hc->xfer_len);
-+ DWC_DEBUGPL(DBG_HCDV, " hctsiz.xfersize %d\n", hctsiz.b.xfersize);
-+ DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n",
-+ _urb->transfer_buffer_length);
-+ DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", _urb->actual_length);
-+ DWC_DEBUGPL(DBG_HCDV, " short_read %d, xfer_done %d\n",
-+ short_read, xfer_done);
-+ }
-+#endif
-+
-+ return xfer_done;
-+}
-+
-+/*
-+ * Save the starting data toggle for the next transfer. The data toggle is
-+ * saved in the QH for non-control transfers and it's saved in the QTD for
-+ * control transfers.
-+ */
-+static void save_data_toggle(dwc_hc_t *_hc,
-+ dwc_otg_hc_regs_t *_hc_regs,
-+ dwc_otg_qtd_t *_qtd)
-+{
-+ hctsiz_data_t hctsiz;
-+ hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
-+
-+ if (_hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) {
-+ dwc_otg_qh_t *qh = _hc->qh;
-+ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
-+ qh->data_toggle = DWC_OTG_HC_PID_DATA0;
-+ } else {
-+ qh->data_toggle = DWC_OTG_HC_PID_DATA1;
-+ }
-+ } else {
-+ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
-+ _qtd->data_toggle = DWC_OTG_HC_PID_DATA0;
-+ } else {
-+ _qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
-+ }
-+ }
-+}
-+
-+/**
-+ * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic
-+ * QHs, removes the QH from the active non-periodic schedule. If any QTDs are
-+ * still linked to the QH, the QH is added to the end of the inactive
-+ * non-periodic schedule. For periodic QHs, removes the QH from the periodic
-+ * schedule if no more QTDs are linked to the QH.
-+ */
-+static void deactivate_qh(dwc_otg_hcd_t *_hcd,
-+ dwc_otg_qh_t *_qh,
-+ int free_qtd)
-+{
-+ int continue_split = 0;
-+ dwc_otg_qtd_t *qtd;
-+
-+ DWC_DEBUGPL(DBG_HCDV, " %s(%p,%p,%d)\n", __func__, _hcd, _qh, free_qtd);
-+
-+ qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
-+
-+ if (qtd->complete_split) {
-+ continue_split = 1;
-+ }
-+ else if ((qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID) ||
-+ (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END))
-+ {
-+ continue_split = 1;
-+ }
-+
-+ if (free_qtd) {
-+ /*
-+ * Note that this was previously a call to
-+ * dwc_otg_hcd_qtd_remove_and_free(qtd), which frees the qtd.
-+ * However, that call frees the qtd memory, and we continue in the
-+ * interrupt logic to access it many more times, including writing
-+ * to it. With slub debugging on, it is clear that we were writing
-+ * to memory we had freed.
-+ * Call this instead, and now I have moved the freeing of the memory to
-+ * the end of processing this interrupt.
-+ */
-+ //dwc_otg_hcd_qtd_remove_and_free(qtd);
-+ dwc_otg_hcd_qtd_remove(qtd);
-+
-+ continue_split = 0;
-+ }
-+
-+ _qh->channel = NULL;
-+ _qh->qtd_in_process = NULL;
-+ dwc_otg_hcd_qh_deactivate(_hcd, _qh, continue_split);
-+}
-+
-+/**
-+ * Updates the state of an Isochronous URB when the transfer is stopped for
-+ * any reason. The fields of the current entry in the frame descriptor array
-+ * are set based on the transfer state and the input _halt_status. Completes
-+ * the Isochronous URB if all the URB frames have been completed.
-+ *
-+ * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be
-+ * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE.
-+ */
-+static dwc_otg_halt_status_e
-+update_isoc_urb_state(dwc_otg_hcd_t *_hcd,
-+ dwc_hc_t *_hc,
-+ dwc_otg_hc_regs_t *_hc_regs,
-+ dwc_otg_qtd_t *_qtd,
-+ dwc_otg_halt_status_e _halt_status)
-+{
-+ struct urb *urb = _qtd->urb;
-+ dwc_otg_halt_status_e ret_val = _halt_status;
-+ struct usb_iso_packet_descriptor *frame_desc;
-+
-+ frame_desc = &urb->iso_frame_desc[_qtd->isoc_frame_index];
-+ switch (_halt_status) {
-+ case DWC_OTG_HC_XFER_COMPLETE:
-+ frame_desc->status = 0;
-+ frame_desc->actual_length =
-+ get_actual_xfer_length(_hc, _hc_regs, _qtd,
-+ _halt_status, NULL);
-+ break;
-+ case DWC_OTG_HC_XFER_FRAME_OVERRUN:
-+ urb->error_count++;
-+ if (_hc->ep_is_in) {
-+ frame_desc->status = -ENOSR;
-+ } else {
-+ frame_desc->status = -ECOMM;
-+ }
-+ frame_desc->actual_length = 0;
-+ break;
-+ case DWC_OTG_HC_XFER_BABBLE_ERR:
-+ urb->error_count++;
-+ frame_desc->status = -EOVERFLOW;
-+ /* Don't need to update actual_length in this case. */
-+ break;
-+ case DWC_OTG_HC_XFER_XACT_ERR:
-+ urb->error_count++;
-+ frame_desc->status = -EPROTO;
-+ frame_desc->actual_length =
-+ get_actual_xfer_length(_hc, _hc_regs, _qtd,
-+ _halt_status, NULL);
-+ default:
-+ DWC_ERROR("%s: Unhandled _halt_status (%d)\n", __func__,
-+ _halt_status);
-+ BUG();
-+ break;
-+ }
-+
-+ if (++_qtd->isoc_frame_index == urb->number_of_packets) {
-+ /*
-+ * urb->status is not used for isoc transfers.
-+ * The individual frame_desc statuses are used instead.
-+ */
-+ dwc_otg_hcd_complete_urb(_hcd, urb, 0);
-+ ret_val = DWC_OTG_HC_XFER_URB_COMPLETE;
-+ } else {
-+ ret_val = DWC_OTG_HC_XFER_COMPLETE;
-+ }
-+
-+ return ret_val;
-+}
-+
-+/**
-+ * Releases a host channel for use by other transfers. Attempts to select and
-+ * queue more transactions since at least one host channel is available.
-+ *
-+ * @param _hcd The HCD state structure.
-+ * @param _hc The host channel to release.
-+ * @param _qtd The QTD associated with the host channel. This QTD may be freed
-+ * if the transfer is complete or an error has occurred.
-+ * @param _halt_status Reason the channel is being released. This status
-+ * determines the actions taken by this function.
-+ */
-+static void release_channel(dwc_otg_hcd_t *_hcd,
-+ dwc_hc_t *_hc,
-+ dwc_otg_qtd_t *_qtd,
-+ dwc_otg_halt_status_e _halt_status,
-+ int *must_free)
-+{
-+ dwc_otg_transaction_type_e tr_type;
-+ int free_qtd;
-+ dwc_otg_qh_t * _qh;
-+ int deact = 1;
-+ int retry_delay = 1;
-+ unsigned long flags;
-+
-+ DWC_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status %d\n", __func__,
-+ _hc->hc_num, _halt_status);
-+
-+ switch (_halt_status) {
-+ case DWC_OTG_HC_XFER_NYET:
-+ case DWC_OTG_HC_XFER_NAK:
-+ if (_halt_status == DWC_OTG_HC_XFER_NYET) {
-+ retry_delay = nyet_deferral_delay;
-+ } else {
-+ retry_delay = nak_deferral_delay;
-+ }
-+ free_qtd = 0;
-+ if (deferral_on && _hc->do_split) {
-+ _qh = _hc->qh;
-+ if (_qh) {
-+ deact = dwc_otg_hcd_qh_deferr(_hcd, _qh , retry_delay);
-+ }
-+ }
-+ break;
-+ case DWC_OTG_HC_XFER_URB_COMPLETE:
-+ free_qtd = 1;
-+ break;
-+ case DWC_OTG_HC_XFER_AHB_ERR:
-+ case DWC_OTG_HC_XFER_STALL:
-+ case DWC_OTG_HC_XFER_BABBLE_ERR:
-+ free_qtd = 1;
-+ break;
-+ case DWC_OTG_HC_XFER_XACT_ERR:
-+ if (_qtd->error_count >= 3) {
-+ DWC_DEBUGPL(DBG_HCDV, " Complete URB with transaction error\n");
-+ free_qtd = 1;
-+ //_qtd->urb->status = -EPROTO;
-+ dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EPROTO);
-+ } else {
-+ free_qtd = 0;
-+ }
-+ break;
-+ case DWC_OTG_HC_XFER_URB_DEQUEUE:
-+ /*
-+ * The QTD has already been removed and the QH has been
-+ * deactivated. Don't want to do anything except release the
-+ * host channel and try to queue more transfers.
-+ */
-+ goto cleanup;
-+ case DWC_OTG_HC_XFER_NO_HALT_STATUS:
-+ DWC_ERROR("%s: No halt_status, channel %d\n", __func__, _hc->hc_num);
-+ free_qtd = 0;
-+ break;
-+ default:
-+ free_qtd = 0;
-+ break;
-+ }
-+ if (free_qtd) {
-+ /* Only change must_free to true (do not set to zero here -- it is
-+ * pre-initialized to zero).
-+ */
-+ *must_free = 1;
-+ }
-+ if (deact) {
-+ deactivate_qh(_hcd, _hc->qh, free_qtd);
-+ }
-+ cleanup:
-+ /*
-+ * Release the host channel for use by other transfers. The cleanup
-+ * function clears the channel interrupt enables and conditions, so
-+ * there's no need to clear the Channel Halted interrupt separately.
-+ */
-+ dwc_otg_hc_cleanup(_hcd->core_if, _hc);
-+ list_add_tail(&_hc->hc_list_entry, &_hcd->free_hc_list);
-+
-+ local_irq_save(flags);
-+ _hcd->available_host_channels++;
-+ local_irq_restore(flags);
-+ /* Try to queue more transfers now that there's a free channel, */
-+ /* unless erratum_usb09_patched is set */
-+ if (!erratum_usb09_patched) {
-+ tr_type = dwc_otg_hcd_select_transactions(_hcd);
-+ if (tr_type != DWC_OTG_TRANSACTION_NONE) {
-+ dwc_otg_hcd_queue_transactions(_hcd, tr_type);
-+ }
-+ }
-+}
-+
-+/**
-+ * Halts a host channel. If the channel cannot be halted immediately because
-+ * the request queue is full, this function ensures that the FIFO empty
-+ * interrupt for the appropriate queue is enabled so that the halt request can
-+ * be queued when there is space in the request queue.
-+ *
-+ * This function may also be called in DMA mode. In that case, the channel is
-+ * simply released since the core always halts the channel automatically in
-+ * DMA mode.
-+ */
-+static void halt_channel(dwc_otg_hcd_t *_hcd,
-+ dwc_hc_t *_hc,
-+ dwc_otg_qtd_t *_qtd,
-+ dwc_otg_halt_status_e _halt_status, int *must_free)
-+{
-+ if (_hcd->core_if->dma_enable) {
-+ release_channel(_hcd, _hc, _qtd, _halt_status, must_free);
-+ return;
-+ }
-+
-+ /* Slave mode processing... */
-+ dwc_otg_hc_halt(_hcd->core_if, _hc, _halt_status);
-+
-+ if (_hc->halt_on_queue) {
-+ gintmsk_data_t gintmsk = {.d32 = 0};
-+ dwc_otg_core_global_regs_t *global_regs;
-+ global_regs = _hcd->core_if->core_global_regs;
-+
-+ if (_hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
-+ _hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
-+ /*
-+ * Make sure the Non-periodic Tx FIFO empty interrupt
-+ * is enabled so that the non-periodic schedule will
-+ * be processed.
-+ */
-+ gintmsk.b.nptxfempty = 1;
-+ dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32);
-+ } else {
-+ /*
-+ * Move the QH from the periodic queued schedule to
-+ * the periodic assigned schedule. This allows the
-+ * halt to be queued when the periodic schedule is
-+ * processed.
-+ */
-+ list_move(&_hc->qh->qh_list_entry,
-+ &_hcd->periodic_sched_assigned);
-+
-+ /*
-+ * Make sure the Periodic Tx FIFO Empty interrupt is
-+ * enabled so that the periodic schedule will be
-+ * processed.
-+ */
-+ gintmsk.b.ptxfempty = 1;
-+ dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32);
-+ }
-+ }
-+}
-+
-+/**
-+ * Performs common cleanup for non-periodic transfers after a Transfer
-+ * Complete interrupt. This function should be called after any endpoint type
-+ * specific handling is finished to release the host channel.
-+ */
-+static void complete_non_periodic_xfer(dwc_otg_hcd_t *_hcd,
-+ dwc_hc_t *_hc,
-+ dwc_otg_hc_regs_t *_hc_regs,
-+ dwc_otg_qtd_t *_qtd,
-+ dwc_otg_halt_status_e _halt_status, int *must_free)
-+{
-+ hcint_data_t hcint;
-+
-+ _qtd->error_count = 0;
-+
-+ hcint.d32 = dwc_read_reg32(&_hc_regs->hcint);
-+ if (hcint.b.nyet) {
-+ /*
-+ * Got a NYET on the last transaction of the transfer. This
-+ * means that the endpoint should be in the PING state at the
-+ * beginning of the next transfer.
-+ */
-+ _hc->qh->ping_state = 1;
-+ clear_hc_int(_hc_regs,nyet);
-+ }
-+
-+ /*
-+ * Always halt and release the host channel to make it available for
-+ * more transfers. There may still be more phases for a control
-+ * transfer or more data packets for a bulk transfer at this point,
-+ * but the host channel is still halted. A channel will be reassigned
-+ * to the transfer when the non-periodic schedule is processed after
-+ * the channel is released. This allows transactions to be queued
-+ * properly via dwc_otg_hcd_queue_transactions, which also enables the
-+ * Tx FIFO Empty interrupt if necessary.
-+ */
-+ if (_hc->ep_is_in) {
-+ /*
-+ * IN transfers in Slave mode require an explicit disable to
-+ * halt the channel. (In DMA mode, this call simply releases
-+ * the channel.)
-+ */
-+ halt_channel(_hcd, _hc, _qtd, _halt_status, must_free);
-+ } else {
-+ /*
-+ * The channel is automatically disabled by the core for OUT
-+ * transfers in Slave mode.
-+ */
-+ release_channel(_hcd, _hc, _qtd, _halt_status, must_free);
-+ }
-+}
-+
-+/**
-+ * Performs common cleanup for periodic transfers after a Transfer Complete
-+ * interrupt. This function should be called after any endpoint type specific
-+ * handling is finished to release the host channel.
-+ */
-+static void complete_periodic_xfer(dwc_otg_hcd_t *_hcd,
-+ dwc_hc_t *_hc,
-+ dwc_otg_hc_regs_t *_hc_regs,
-+ dwc_otg_qtd_t *_qtd,
-+ dwc_otg_halt_status_e _halt_status, int *must_free)
-+{
-+ hctsiz_data_t hctsiz;
-+ _qtd->error_count = 0;
-+
-+ hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
-+ if (!_hc->ep_is_in || hctsiz.b.pktcnt == 0) {
-+ /* Core halts channel in these cases. */
-+ release_channel(_hcd, _hc, _qtd, _halt_status, must_free);
-+ } else {
-+ /* Flush any outstanding requests from the Tx queue. */
-+ halt_channel(_hcd, _hc, _qtd, _halt_status, must_free);
-+ }
-+}
-+
-+/**
-+ * Handles a host channel Transfer Complete interrupt. This handler may be
-+ * called in either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t *_hcd,
-+ dwc_hc_t *_hc,
-+ dwc_otg_hc_regs_t *_hc_regs,
-+ dwc_otg_qtd_t *_qtd, int *must_free)
-+{
-+ int urb_xfer_done;
-+ dwc_otg_halt_status_e halt_status = DWC_OTG_HC_XFER_COMPLETE;
-+ struct urb *urb = _qtd->urb;
-+ int pipe_type = usb_pipetype(urb->pipe);
-+ int status = -EINPROGRESS;
-+
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "Transfer Complete--\n", _hc->hc_num);
-+
-+ /*
-+ * Handle xfer complete on CSPLIT.
-+ */
-+ if (_hc->qh->do_split) {
-+ _qtd->complete_split = 0;
-+ }
-+
-+ /* Update the QTD and URB states. */
-+ switch (pipe_type) {
-+ case PIPE_CONTROL:
-+ switch (_qtd->control_phase) {
-+ case DWC_OTG_CONTROL_SETUP:
-+ if (urb->transfer_buffer_length > 0) {
-+ _qtd->control_phase = DWC_OTG_CONTROL_DATA;
-+ } else {
-+ _qtd->control_phase = DWC_OTG_CONTROL_STATUS;
-+ }
-+ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction done\n");
-+ halt_status = DWC_OTG_HC_XFER_COMPLETE;
-+ break;
-+ case DWC_OTG_CONTROL_DATA: {
-+ urb_xfer_done = update_urb_state_xfer_comp(_hc, _hc_regs,urb, _qtd, &status);
-+ if (urb_xfer_done) {
-+ _qtd->control_phase = DWC_OTG_CONTROL_STATUS;
-+ DWC_DEBUGPL(DBG_HCDV, " Control data transfer done\n");
-+ } else {
-+ save_data_toggle(_hc, _hc_regs, _qtd);
-+ }
-+ halt_status = DWC_OTG_HC_XFER_COMPLETE;
-+ break;
-+ }
-+ case DWC_OTG_CONTROL_STATUS:
-+ DWC_DEBUGPL(DBG_HCDV, " Control transfer complete\n");
-+ if (status == -EINPROGRESS) {
-+ status = 0;
-+ }
-+ dwc_otg_hcd_complete_urb(_hcd, urb, status);
-+ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
-+ break;
-+ }
-+
-+ complete_non_periodic_xfer(_hcd, _hc, _hc_regs, _qtd,
-+ halt_status, must_free);
-+ break;
-+ case PIPE_BULK:
-+ DWC_DEBUGPL(DBG_HCDV, " Bulk transfer complete\n");
-+ urb_xfer_done = update_urb_state_xfer_comp(_hc, _hc_regs, urb, _qtd, &status);
-+ if (urb_xfer_done) {
-+ dwc_otg_hcd_complete_urb(_hcd, urb, status);
-+ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
-+ } else {
-+ halt_status = DWC_OTG_HC_XFER_COMPLETE;
-+ }
-+
-+ save_data_toggle(_hc, _hc_regs, _qtd);
-+ complete_non_periodic_xfer(_hcd, _hc, _hc_regs, _qtd,halt_status, must_free);
-+ break;
-+ case PIPE_INTERRUPT:
-+ DWC_DEBUGPL(DBG_HCDV, " Interrupt transfer complete\n");
-+ update_urb_state_xfer_comp(_hc, _hc_regs, urb, _qtd, &status);
-+
-+ /*
-+ * Interrupt URB is done on the first transfer complete
-+ * interrupt.
-+ */
-+ dwc_otg_hcd_complete_urb(_hcd, urb, status);
-+ save_data_toggle(_hc, _hc_regs, _qtd);
-+ complete_periodic_xfer(_hcd, _hc, _hc_regs, _qtd,
-+ DWC_OTG_HC_XFER_URB_COMPLETE, must_free);
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ DWC_DEBUGPL(DBG_HCDV, " Isochronous transfer complete\n");
-+ if (_qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL)
-+ {
-+ halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd,
-+ DWC_OTG_HC_XFER_COMPLETE);
-+ }
-+ complete_periodic_xfer(_hcd, _hc, _hc_regs, _qtd, halt_status, must_free);
-+ break;
-+ }
-+
-+ disable_hc_int(_hc_regs,xfercompl);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel STALL interrupt. This handler may be called in
-+ * either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_stall_intr(dwc_otg_hcd_t *_hcd,
-+ dwc_hc_t *_hc,
-+ dwc_otg_hc_regs_t *_hc_regs,
-+ dwc_otg_qtd_t *_qtd, int *must_free)
-+{
-+ struct urb *urb = _qtd->urb;
-+ int pipe_type = usb_pipetype(urb->pipe);
-+
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "STALL Received--\n", _hc->hc_num);
-+
-+ if (pipe_type == PIPE_CONTROL) {
-+ dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EPIPE);
-+ }
-+
-+ if (pipe_type == PIPE_BULK || pipe_type == PIPE_INTERRUPT) {
-+ dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EPIPE);
-+ /*
-+ * USB protocol requires resetting the data toggle for bulk
-+ * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT)
-+ * setup command is issued to the endpoint. Anticipate the
-+ * CLEAR_FEATURE command since a STALL has occurred and reset
-+ * the data toggle now.
-+ */
-+ _hc->qh->data_toggle = 0;
-+ }
-+
-+ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_STALL, must_free);
-+ disable_hc_int(_hc_regs,stall);
-+
-+ return 1;
-+}
-+
-+/*
-+ * Updates the state of the URB when a transfer has been stopped due to an
-+ * abnormal condition before the transfer completes. Modifies the
-+ * actual_length field of the URB to reflect the number of bytes that have
-+ * actually been transferred via the host channel.
-+ */
-+static void update_urb_state_xfer_intr(dwc_hc_t *_hc,
-+ dwc_otg_hc_regs_t *_hc_regs,
-+ struct urb *_urb,
-+ dwc_otg_qtd_t *_qtd,
-+ dwc_otg_halt_status_e _halt_status)
-+{
-+ uint32_t bytes_transferred = get_actual_xfer_length(_hc, _hc_regs, _qtd,
-+ _halt_status, NULL);
-+ _urb->actual_length += bytes_transferred;
-+
-+#ifdef DEBUG
-+ {
-+ hctsiz_data_t hctsiz;
-+ hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
-+ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
-+ __func__, (_hc->ep_is_in ? "IN" : "OUT"), _hc->hc_num);
-+ DWC_DEBUGPL(DBG_HCDV, " _hc->start_pkt_count %d\n", _hc->start_pkt_count);
-+ DWC_DEBUGPL(DBG_HCDV, " hctsiz.pktcnt %d\n", hctsiz.b.pktcnt);
-+ DWC_DEBUGPL(DBG_HCDV, " _hc->max_packet %d\n", _hc->max_packet);
-+ DWC_DEBUGPL(DBG_HCDV, " bytes_transferred %d\n", bytes_transferred);
-+ DWC_DEBUGPL(DBG_HCDV, " _urb->actual_length %d\n", _urb->actual_length);
-+ DWC_DEBUGPL(DBG_HCDV, " _urb->transfer_buffer_length %d\n",
-+ _urb->transfer_buffer_length);
-+ }
-+#endif
-+}
-+
-+/**
-+ * Handles a host channel NAK interrupt. This handler may be called in either
-+ * DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_nak_intr(dwc_otg_hcd_t *_hcd,
-+ dwc_hc_t *_hc,
-+ dwc_otg_hc_regs_t *_hc_regs,
-+ dwc_otg_qtd_t *_qtd, int *must_free)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "NAK Received--\n", _hc->hc_num);
-+
-+ /*
-+ * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and
-+ * interrupt. Re-start the SSPLIT transfer.
-+ */
-+ if (_hc->do_split) {
-+ if (_hc->complete_split) {
-+ _qtd->error_count = 0;
-+ }
-+ _qtd->complete_split = 0;
-+ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NAK, must_free);
-+ goto handle_nak_done;
-+ }
-+
-+ switch (usb_pipetype(_qtd->urb->pipe)) {
-+ case PIPE_CONTROL:
-+ case PIPE_BULK:
-+ if (_hcd->core_if->dma_enable && _hc->ep_is_in) {
-+ /*
-+ * NAK interrupts are enabled on bulk/control IN
-+ * transfers in DMA mode for the sole purpose of
-+ * resetting the error count after a transaction error
-+ * occurs. The core will continue transferring data.
-+ */
-+ _qtd->error_count = 0;
-+ goto handle_nak_done;
-+ }
-+
-+ /*
-+ * NAK interrupts normally occur during OUT transfers in DMA
-+ * or Slave mode. For IN transfers, more requests will be
-+ * queued as request queue space is available.
-+ */
-+ _qtd->error_count = 0;
-+
-+ if (!_hc->qh->ping_state) {
-+ update_urb_state_xfer_intr(_hc, _hc_regs, _qtd->urb,
-+ _qtd, DWC_OTG_HC_XFER_NAK);
-+ save_data_toggle(_hc, _hc_regs, _qtd);
-+ if (_qtd->urb->dev->speed == USB_SPEED_HIGH) {
-+ _hc->qh->ping_state = 1;
-+ }
-+ }
-+
-+ /*
-+ * Halt the channel so the transfer can be re-started from
-+ * the appropriate point or the PING protocol will
-+ * start/continue.
-+ */
-+ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NAK, must_free);
-+ break;
-+ case PIPE_INTERRUPT:
-+ _qtd->error_count = 0;
-+ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NAK, must_free);
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ /* Should never get called for isochronous transfers. */
-+ BUG();
-+ break;
-+ }
-+
-+ handle_nak_done:
-+ disable_hc_int(_hc_regs,nak);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel ACK interrupt. This interrupt is enabled when
-+ * performing the PING protocol in Slave mode, when errors occur during
-+ * either Slave mode or DMA mode, and during Start Split transactions.
-+ */
-+static int32_t handle_hc_ack_intr(dwc_otg_hcd_t *_hcd,
-+ dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "ACK Received--\n", _hc->hc_num);
-+
-+ if (_hc->do_split) {
-+ /*
-+ * Handle ACK on SSPLIT.
-+ * ACK should not occur in CSPLIT.
-+ */
-+ if ((!_hc->ep_is_in) && (_hc->data_pid_start != DWC_OTG_HC_PID_SETUP)) {
-+ _qtd->ssplit_out_xfer_count = _hc->xfer_len;
-+ }
-+ if (!(_hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !_hc->ep_is_in)) {
-+ /* Don't need complete for isochronous out transfers. */
-+ _qtd->complete_split = 1;
-+ }
-+
-+ /* ISOC OUT */
-+ if ((_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && !_hc->ep_is_in) {
-+ switch (_hc->xact_pos) {
-+ case DWC_HCSPLIT_XACTPOS_ALL:
-+ break;
-+ case DWC_HCSPLIT_XACTPOS_END:
-+ _qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
-+ _qtd->isoc_split_offset = 0;
-+ break;
-+ case DWC_HCSPLIT_XACTPOS_BEGIN:
-+ case DWC_HCSPLIT_XACTPOS_MID:
-+ /*
-+ * For BEGIN or MID, calculate the length for
-+ * the next microframe to determine the correct
-+ * SSPLIT token, either MID or END.
-+ */
-+ do {
-+ struct usb_iso_packet_descriptor *frame_desc;
-+
-+ frame_desc = &_qtd->urb->iso_frame_desc[_qtd->isoc_frame_index];
-+ _qtd->isoc_split_offset += 188;
-+
-+ if ((frame_desc->length - _qtd->isoc_split_offset) <= 188) {
-+ _qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_END;
-+ }
-+ else {
-+ _qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_MID;
-+ }
-+
-+ } while(0);
-+ break;
-+ }
-+ } else {
-+ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_ACK, must_free);
-+ }
-+ } else {
-+ _qtd->error_count = 0;
-+
-+ if (_hc->qh->ping_state) {
-+ _hc->qh->ping_state = 0;
-+ /*
-+ * Halt the channel so the transfer can be re-started
-+ * from the appropriate point. This only happens in
-+ * Slave mode. In DMA mode, the ping_state is cleared
-+ * when the transfer is started because the core
-+ * automatically executes the PING, then the transfer.
-+ */
-+ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_ACK, must_free);
-+ } else {
-+ halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
-+ }
-+ }
-+
-+ /*
-+ * If the ACK occurred when _not_ in the PING state, let the channel
-+ * continue transferring data after clearing the error count.
-+ */
-+
-+ disable_hc_int(_hc_regs,ack);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel NYET interrupt. This interrupt should only occur on
-+ * Bulk and Control OUT endpoints and for complete split transactions. If a
-+ * NYET occurs at the same time as a Transfer Complete interrupt, it is
-+ * handled in the xfercomp interrupt handler, not here. This handler may be
-+ * called in either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t *_hcd,
-+ dwc_hc_t *_hc,
-+ dwc_otg_hc_regs_t *_hc_regs,
-+ dwc_otg_qtd_t *_qtd, int *must_free)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "NYET Received--\n", _hc->hc_num);
-+
-+ /*
-+ * NYET on CSPLIT
-+ * re-do the CSPLIT immediately on non-periodic
-+ */
-+ if ((_hc->do_split) && (_hc->complete_split)) {
-+ if ((_hc->ep_type == DWC_OTG_EP_TYPE_INTR) ||
-+ (_hc->ep_type == DWC_OTG_EP_TYPE_ISOC)) {
-+ int frnum = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(_hcd));
-+
-+ if (dwc_full_frame_num(frnum) !=
-+ dwc_full_frame_num(_hc->qh->sched_frame)) {
-+ /*
-+ * No longer in the same full speed frame.
-+ * Treat this as a transaction error.
-+ */
-+#if 0
-+ /** @todo Fix system performance so this can
-+ * be treated as an error. Right now complete
-+ * splits cannot be scheduled precisely enough
-+ * due to other system activity, so this error
-+ * occurs regularly in Slave mode.
-+ */
-+ _qtd->error_count++;
-+#endif
-+ _qtd->complete_split = 0;
-+ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_XACT_ERR, must_free);
-+ /** @todo add support for isoc release */
-+ goto handle_nyet_done;
-+ }
-+ }
-+
-+ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NYET, must_free);
-+ goto handle_nyet_done;
-+ }
-+
-+ _hc->qh->ping_state = 1;
-+ _qtd->error_count = 0;
-+
-+ update_urb_state_xfer_intr(_hc, _hc_regs, _qtd->urb, _qtd,
-+ DWC_OTG_HC_XFER_NYET);
-+ save_data_toggle(_hc, _hc_regs, _qtd);
-+
-+ /*
-+ * Halt the channel and re-start the transfer so the PING
-+ * protocol will start.
-+ */
-+ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_NYET, must_free);
-+
-+handle_nyet_done:
-+ disable_hc_int(_hc_regs,nyet);
-+ clear_hc_int(_hc_regs, nyet);
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel babble interrupt. This handler may be called in
-+ * either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_babble_intr(dwc_otg_hcd_t *_hcd,
-+ dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "Babble Error--\n", _hc->hc_num);
-+ if (_hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
-+ dwc_otg_hcd_complete_urb(_hcd, _qtd->urb, -EOVERFLOW);
-+ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_BABBLE_ERR, must_free);
-+ } else {
-+ dwc_otg_halt_status_e halt_status;
-+ halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd,
-+ DWC_OTG_HC_XFER_BABBLE_ERR);
-+ halt_channel(_hcd, _hc, _qtd, halt_status, must_free);
-+ }
-+ disable_hc_int(_hc_regs,bblerr);
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel AHB error interrupt. This handler is only called in
-+ * DMA mode.
-+ */
-+static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t *_hcd,
-+ dwc_hc_t *_hc,
-+ dwc_otg_hc_regs_t *_hc_regs,
-+ dwc_otg_qtd_t *_qtd)
-+{
-+ hcchar_data_t hcchar;
-+ hcsplt_data_t hcsplt;
-+ hctsiz_data_t hctsiz;
-+ uint32_t hcdma;
-+ struct urb *urb = _qtd->urb;
-+
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "AHB Error--\n", _hc->hc_num);
-+
-+ hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar);
-+ hcsplt.d32 = dwc_read_reg32(&_hc_regs->hcsplt);
-+ hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
-+ hcdma = dwc_read_reg32(&_hc_regs->hcdma);
-+
-+ DWC_ERROR("AHB ERROR, Channel %d\n", _hc->hc_num);
-+ DWC_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
-+ DWC_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n");
-+ DWC_ERROR(" Device address: %d\n", usb_pipedevice(urb->pipe));
-+ DWC_ERROR(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
-+ (usb_pipein(urb->pipe) ? "IN" : "OUT"));
-+ DWC_ERROR(" Endpoint type: %s\n",
-+ ({char *pipetype;
-+ switch (usb_pipetype(urb->pipe)) {
-+ case PIPE_CONTROL: pipetype = "CONTROL"; break;
-+ case PIPE_BULK: pipetype = "BULK"; break;
-+ case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
-+ case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
-+ default: pipetype = "UNKNOWN"; break;
-+ }; pipetype;}));
-+ DWC_ERROR(" Speed: %s\n",
-+ ({char *speed;
-+ switch (urb->dev->speed) {
-+ case USB_SPEED_HIGH: speed = "HIGH"; break;
-+ case USB_SPEED_FULL: speed = "FULL"; break;
-+ case USB_SPEED_LOW: speed = "LOW"; break;
-+ default: speed = "UNKNOWN"; break;
-+ }; speed;}));
-+ DWC_ERROR(" Max packet size: %d\n",
-+ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
-+ DWC_ERROR(" Data buffer length: %d\n", urb->transfer_buffer_length);
-+ DWC_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n",
-+ urb->transfer_buffer, (void *)(u32)urb->transfer_dma);
-+ DWC_ERROR(" Setup buffer: %p, Setup DMA: %p\n",
-+ urb->setup_packet, (void *)(u32)urb->setup_dma);
-+ DWC_ERROR(" Interval: %d\n", urb->interval);
-+
-+ dwc_otg_hcd_complete_urb(_hcd, urb, -EIO);
-+
-+ /*
-+ * Force a channel halt. Don't call halt_channel because that won't
-+ * write to the HCCHARn register in DMA mode to force the halt.
-+ */
-+ dwc_otg_hc_halt(_hcd->core_if, _hc, DWC_OTG_HC_XFER_AHB_ERR);
-+
-+ disable_hc_int(_hc_regs,ahberr);
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel transaction error interrupt. This handler may be
-+ * called in either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t *_hcd,
-+ dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "Transaction Error--\n", _hc->hc_num);
-+
-+ switch (usb_pipetype(_qtd->urb->pipe)) {
-+ case PIPE_CONTROL:
-+ case PIPE_BULK:
-+ _qtd->error_count++;
-+ if (!_hc->qh->ping_state) {
-+ update_urb_state_xfer_intr(_hc, _hc_regs, _qtd->urb,
-+ _qtd, DWC_OTG_HC_XFER_XACT_ERR);
-+ save_data_toggle(_hc, _hc_regs, _qtd);
-+ if (!_hc->ep_is_in && _qtd->urb->dev->speed == USB_SPEED_HIGH) {
-+ _hc->qh->ping_state = 1;
-+ }
-+ }
-+
-+ /*
-+ * Halt the channel so the transfer can be re-started from
-+ * the appropriate point or the PING protocol will start.
-+ */
-+ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_XACT_ERR, must_free);
-+ break;
-+ case PIPE_INTERRUPT:
-+ _qtd->error_count++;
-+ if ((_hc->do_split) && (_hc->complete_split)) {
-+ _qtd->complete_split = 0;
-+ }
-+ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_XACT_ERR, must_free);
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ {
-+ dwc_otg_halt_status_e halt_status;
-+ halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd,
-+ DWC_OTG_HC_XFER_XACT_ERR);
-+
-+ halt_channel(_hcd, _hc, _qtd, halt_status, must_free);
-+ }
-+ break;
-+ }
-+
-+
-+ disable_hc_int(_hc_regs,xacterr);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel frame overrun interrupt. This handler may be called
-+ * in either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t *_hcd,
-+ dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "Frame Overrun--\n", _hc->hc_num);
-+
-+ switch (usb_pipetype(_qtd->urb->pipe)) {
-+ case PIPE_CONTROL:
-+ case PIPE_BULK:
-+ break;
-+ case PIPE_INTERRUPT:
-+ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN, must_free);
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ {
-+ dwc_otg_halt_status_e halt_status;
-+ halt_status = update_isoc_urb_state(_hcd, _hc, _hc_regs, _qtd,
-+ DWC_OTG_HC_XFER_FRAME_OVERRUN);
-+
-+ halt_channel(_hcd, _hc, _qtd, halt_status, must_free);
-+ }
-+ break;
-+ }
-+
-+ disable_hc_int(_hc_regs,frmovrun);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel data toggle error interrupt. This handler may be
-+ * called in either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t *_hcd,
-+ dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "Data Toggle Error--\n", _hc->hc_num);
-+
-+ if (_hc->ep_is_in) {
-+ _qtd->error_count = 0;
-+ } else {
-+ DWC_ERROR("Data Toggle Error on OUT transfer,"
-+ "channel %d\n", _hc->hc_num);
-+ }
-+
-+ disable_hc_int(_hc_regs,datatglerr);
-+
-+ return 1;
-+}
-+
-+#ifdef DEBUG
-+/**
-+ * This function is for debug only. It checks that a valid halt status is set
-+ * and that HCCHARn.chdis is clear. If there's a problem, corrective action is
-+ * taken and a warning is issued.
-+ * @return 1 if halt status is ok, 0 otherwise.
-+ */
-+static inline int halt_status_ok(dwc_otg_hcd_t *_hcd,
-+ dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
-+{
-+ hcchar_data_t hcchar;
-+ hctsiz_data_t hctsiz;
-+ hcint_data_t hcint;
-+ hcintmsk_data_t hcintmsk;
-+ hcsplt_data_t hcsplt;
-+
-+ if (_hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) {
-+ /*
-+ * This code is here only as a check. This condition should
-+ * never happen. Ignore the halt if it does occur.
-+ */
-+ hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar);
-+ hctsiz.d32 = dwc_read_reg32(&_hc_regs->hctsiz);
-+ hcint.d32 = dwc_read_reg32(&_hc_regs->hcint);
-+ hcintmsk.d32 = dwc_read_reg32(&_hc_regs->hcintmsk);
-+ hcsplt.d32 = dwc_read_reg32(&_hc_regs->hcsplt);
-+ DWC_WARN("%s: _hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS, "
-+ "channel %d, hcchar 0x%08x, hctsiz 0x%08x, "
-+ "hcint 0x%08x, hcintmsk 0x%08x, "
-+ "hcsplt 0x%08x, qtd->complete_split %d\n",
-+ __func__, _hc->hc_num, hcchar.d32, hctsiz.d32,
-+ hcint.d32, hcintmsk.d32,
-+ hcsplt.d32, _qtd->complete_split);
-+
-+ DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n",
-+ __func__, _hc->hc_num);
-+ DWC_WARN("\n");
-+ clear_hc_int(_hc_regs,chhltd);
-+ return 0;
-+ }
-+
-+ /*
-+ * This code is here only as a check. hcchar.chdis should
-+ * never be set when the halt interrupt occurs. Halt the
-+ * channel again if it does occur.
-+ */
-+ hcchar.d32 = dwc_read_reg32(&_hc_regs->hcchar);
-+ if (hcchar.b.chdis) {
-+ DWC_WARN("%s: hcchar.chdis set unexpectedly, "
-+ "hcchar 0x%08x, trying to halt again\n",
-+ __func__, hcchar.d32);
-+ clear_hc_int(_hc_regs,chhltd);
-+ _hc->halt_pending = 0;
-+ halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
-+ return 0;
-+ }
-+
-+ return 1;
-+}
-+#endif
-+
-+/**
-+ * Handles a host Channel Halted interrupt in DMA mode. This handler
-+ * determines the reason the channel halted and proceeds accordingly.
-+ */
-+static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t *_hcd,
-+ dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
-+{
-+ hcint_data_t hcint;
-+ hcintmsk_data_t hcintmsk;
-+
-+ if (_hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
-+ _hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
-+ /*
-+ * Just release the channel. A dequeue can happen on a
-+ * transfer timeout. In the case of an AHB Error, the channel
-+ * was forced to halt because there's no way to gracefully
-+ * recover.
-+ */
-+ release_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
-+ return;
-+ }
-+
-+ /* Read the HCINTn register to determine the cause for the halt. */
-+ hcint.d32 = dwc_read_reg32(&_hc_regs->hcint);
-+ hcintmsk.d32 = dwc_read_reg32(&_hc_regs->hcintmsk);
-+
-+ if (hcint.b.xfercomp) {
-+ /** @todo This is here because of a possible hardware bug. Spec
-+ * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT
-+ * interrupt w/ACK bit set should occur, but I only see the
-+ * XFERCOMP bit, even with it masked out. This is a workaround
-+ * for that behavior. Should fix this when hardware is fixed.
-+ */
-+ if ((_hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && (!_hc->ep_is_in)) {
-+ handle_hc_ack_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
-+ }
-+ handle_hc_xfercomp_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
-+ } else if (hcint.b.stall) {
-+ handle_hc_stall_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
-+ } else if (hcint.b.xacterr) {
-+ /*
-+ * Must handle xacterr before nak or ack. Could get a xacterr
-+ * at the same time as either of these on a BULK/CONTROL OUT
-+ * that started with a PING. The xacterr takes precedence.
-+ */
-+ handle_hc_xacterr_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
-+ } else if (hcint.b.nyet) {
-+ /*
-+ * Must handle nyet before nak or ack. Could get a nyet at the
-+ * same time as either of those on a BULK/CONTROL OUT that
-+ * started with a PING. The nyet takes precedence.
-+ */
-+ handle_hc_nyet_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
-+ } else if (hcint.b.bblerr) {
-+ handle_hc_babble_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
-+ } else if (hcint.b.frmovrun) {
-+ handle_hc_frmovrun_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
-+ } else if (hcint.b.datatglerr) {
-+ handle_hc_datatglerr_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
-+ _hc->qh->data_toggle = 0;
-+ halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
-+ } else if (hcint.b.nak && !hcintmsk.b.nak) {
-+ /*
-+ * If nak is not masked, it's because a non-split IN transfer
-+ * is in an error state. In that case, the nak is handled by
-+ * the nak interrupt handler, not here. Handle nak here for
-+ * BULK/CONTROL OUT transfers, which halt on a NAK to allow
-+ * rewinding the buffer pointer.
-+ */
-+ handle_hc_nak_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
-+ } else if (hcint.b.ack && !hcintmsk.b.ack) {
-+ /*
-+ * If ack is not masked, it's because a non-split IN transfer
-+ * is in an error state. In that case, the ack is handled by
-+ * the ack interrupt handler, not here. Handle ack here for
-+ * split transfers. Start splits halt on ACK.
-+ */
-+ handle_hc_ack_intr(_hcd, _hc, _hc_regs, _qtd, must_free);
-+ } else {
-+ if (_hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ _hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ /*
-+ * A periodic transfer halted with no other channel
-+ * interrupts set. Assume it was halted by the core
-+ * because it could not be completed in its scheduled
-+ * (micro)frame.
-+ */
-+#ifdef DEBUG
-+ DWC_PRINT("%s: Halt channel %d (assume incomplete periodic transfer)\n",
-+ __func__, _hc->hc_num);
-+#endif /* */
-+ halt_channel(_hcd, _hc, _qtd,
-+ DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE, must_free);
-+ } else {
-+#ifdef DEBUG
-+ DWC_ERROR("%s: Channel %d, DMA Mode -- ChHltd set, but reason "
-+ "for halting is unknown, nyet %d, hcint 0x%08x, intsts 0x%08x\n",
-+ __func__, _hc->hc_num, hcint.b.nyet, hcint.d32,
-+ dwc_read_reg32(&_hcd->core_if->core_global_regs->gintsts));
-+#endif
-+ halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
-+ }
-+ }
-+}
-+
-+/**
-+ * Handles a host channel Channel Halted interrupt.
-+ *
-+ * In slave mode, this handler is called only when the driver specifically
-+ * requests a halt. This occurs during handling other host channel interrupts
-+ * (e.g. nak, xacterr, stall, nyet, etc.).
-+ *
-+ * In DMA mode, this is the interrupt that occurs when the core has finished
-+ * processing a transfer on a channel. Other host channel interrupts (except
-+ * ahberr) are disabled in DMA mode.
-+ */
-+static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t *_hcd,
-+ dwc_hc_t * _hc, dwc_otg_hc_regs_t * _hc_regs, dwc_otg_qtd_t * _qtd, int *must_free)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "Channel Halted--\n", _hc->hc_num);
-+
-+ if (_hcd->core_if->dma_enable) {
-+ handle_hc_chhltd_intr_dma(_hcd, _hc, _hc_regs, _qtd, must_free);
-+ } else {
-+#ifdef DEBUG
-+ if (!halt_status_ok(_hcd, _hc, _hc_regs, _qtd, must_free)) {
-+ return 1;
-+ }
-+#endif /* */
-+ release_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
-+ }
-+
-+ return 1;
-+}
-+
-+/** Handles interrupt for a specific Host Channel */
-+int32_t dwc_otg_hcd_handle_hc_n_intr (dwc_otg_hcd_t *_dwc_otg_hcd, uint32_t _num)
-+{
-+ int must_free = 0;
-+ int retval = 0;
-+ hcint_data_t hcint;
-+ hcintmsk_data_t hcintmsk;
-+ dwc_hc_t *hc;
-+ dwc_otg_hc_regs_t *hc_regs;
-+ dwc_otg_qtd_t *qtd;
-+
-+ DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", _num);
-+
-+ hc = _dwc_otg_hcd->hc_ptr_array[_num];
-+ hc_regs = _dwc_otg_hcd->core_if->host_if->hc_regs[_num];
-+ qtd = list_entry(hc->qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry);
-+
-+ hcint.d32 = dwc_read_reg32(&hc_regs->hcint);
-+ hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk);
-+ DWC_DEBUGPL(DBG_HCDV, " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
-+ hcint.d32, hcintmsk.d32, (hcint.d32 & hcintmsk.d32));
-+ hcint.d32 = hcint.d32 & hcintmsk.d32;
-+
-+ if (!_dwc_otg_hcd->core_if->dma_enable) {
-+ if ((hcint.b.chhltd) && (hcint.d32 != 0x2)) {
-+ hcint.b.chhltd = 0;
-+ }
-+ }
-+
-+ if (hcint.b.xfercomp) {
-+ retval |= handle_hc_xfercomp_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
-+ /*
-+ * If NYET occurred at same time as Xfer Complete, the NYET is
-+ * handled by the Xfer Complete interrupt handler. Don't want
-+ * to call the NYET interrupt handler in this case.
-+ */
-+ hcint.b.nyet = 0;
-+ }
-+ if (hcint.b.chhltd) {
-+ retval |= handle_hc_chhltd_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
-+ }
-+ if (hcint.b.ahberr) {
-+ retval |= handle_hc_ahberr_intr(_dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.stall) {
-+ retval |= handle_hc_stall_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
-+ }
-+ if (hcint.b.nak) {
-+ retval |= handle_hc_nak_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
-+ }
-+ if (hcint.b.ack) {
-+ retval |= handle_hc_ack_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
-+ }
-+ if (hcint.b.nyet) {
-+ retval |= handle_hc_nyet_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
-+ }
-+ if (hcint.b.xacterr) {
-+ retval |= handle_hc_xacterr_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
-+ }
-+ if (hcint.b.bblerr) {
-+ retval |= handle_hc_babble_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
-+ }
-+ if (hcint.b.frmovrun) {
-+ retval |= handle_hc_frmovrun_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
-+ }
-+ if (hcint.b.datatglerr) {
-+ retval |= handle_hc_datatglerr_intr(_dwc_otg_hcd, hc, hc_regs, qtd, &must_free);
-+ }
-+
-+ /*
-+ * Logic to free the qtd here, at the end of the hc intr
-+ * processing, if the handling of this interrupt determined
-+ * that it needs to be freed.
-+ */
-+ if (must_free) {
-+ /* Free the qtd here now that we are done using it. */
-+ dwc_otg_hcd_qtd_free(qtd);
-+ }
-+ return retval;
-+}
-+
-+#endif /* DWC_DEVICE_ONLY */
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c
-@@ -0,0 +1,794 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd_queue.c $
-+ * $Revision: 1.1.1.1 $
-+ * $Date: 2009-04-17 06:15:34 $
-+ * $Change: 537387 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_DEVICE_ONLY
-+
-+/**
-+ * @file
-+ *
-+ * This file contains the functions to manage Queue Heads and Queue
-+ * Transfer Descriptors.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/errno.h>
-+#include <linux/list.h>
-+#include <linux/interrupt.h>
-+#include <linux/string.h>
-+
-+#include "dwc_otg_driver.h"
-+#include "dwc_otg_hcd.h"
-+#include "dwc_otg_regs.h"
-+
-+/**
-+ * This function allocates and initializes a QH.
-+ *
-+ * @param _hcd The HCD state structure for the DWC OTG controller.
-+ * @param[in] _urb Holds the information about the device/endpoint that we need
-+ * to initialize the QH.
-+ *
-+ * @return Returns pointer to the newly allocated QH, or NULL on error. */
-+dwc_otg_qh_t *dwc_otg_hcd_qh_create (dwc_otg_hcd_t *_hcd, struct urb *_urb)
-+{
-+ dwc_otg_qh_t *qh;
-+
-+ /* Allocate memory */
-+ /** @todo add memflags argument */
-+ qh = dwc_otg_hcd_qh_alloc ();
-+ if (qh == NULL) {
-+ return NULL;
-+ }
-+
-+ dwc_otg_hcd_qh_init (_hcd, qh, _urb);
-+ return qh;
-+}
-+
-+/** Free each QTD in the QH's QTD-list then free the QH. QH should already be
-+ * removed from a list. QTD list should already be empty if called from URB
-+ * Dequeue.
-+ *
-+ * @param[in] _qh The QH to free.
-+ */
-+void dwc_otg_hcd_qh_free (dwc_otg_qh_t *_qh)
-+{
-+ dwc_otg_qtd_t *qtd;
-+ struct list_head *pos;
-+ unsigned long flags;
-+
-+ /* Free each QTD in the QTD list */
-+ local_irq_save (flags);
-+ for (pos = _qh->qtd_list.next;
-+ pos != &_qh->qtd_list;
-+ pos = _qh->qtd_list.next)
-+ {
-+ list_del (pos);
-+ qtd = dwc_list_to_qtd (pos);
-+ dwc_otg_hcd_qtd_free (qtd);
-+ }
-+ local_irq_restore (flags);
-+
-+ kfree (_qh);
-+ return;
-+}
-+
-+/** Initializes a QH structure.
-+ *
-+ * @param[in] _hcd The HCD state structure for the DWC OTG controller.
-+ * @param[in] _qh The QH to init.
-+ * @param[in] _urb Holds the information about the device/endpoint that we need
-+ * to initialize the QH. */
-+#define SCHEDULE_SLOP 10
-+void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, struct urb *_urb)
-+{
-+ memset (_qh, 0, sizeof (dwc_otg_qh_t));
-+
-+ /* Initialize QH */
-+ switch (usb_pipetype(_urb->pipe)) {
-+ case PIPE_CONTROL:
-+ _qh->ep_type = USB_ENDPOINT_XFER_CONTROL;
-+ break;
-+ case PIPE_BULK:
-+ _qh->ep_type = USB_ENDPOINT_XFER_BULK;
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ _qh->ep_type = USB_ENDPOINT_XFER_ISOC;
-+ break;
-+ case PIPE_INTERRUPT:
-+ _qh->ep_type = USB_ENDPOINT_XFER_INT;
-+ break;
-+ }
-+
-+ _qh->ep_is_in = usb_pipein(_urb->pipe) ? 1 : 0;
-+
-+ _qh->data_toggle = DWC_OTG_HC_PID_DATA0;
-+ _qh->maxp = usb_maxpacket(_urb->dev, _urb->pipe, !(usb_pipein(_urb->pipe)));
-+ INIT_LIST_HEAD(&_qh->qtd_list);
-+ INIT_LIST_HEAD(&_qh->qh_list_entry);
-+ _qh->channel = NULL;
-+
-+ /* FS/LS Enpoint on HS Hub
-+ * NOT virtual root hub */
-+ _qh->do_split = 0;
-+ _qh->speed = _urb->dev->speed;
-+ if (((_urb->dev->speed == USB_SPEED_LOW) ||
-+ (_urb->dev->speed == USB_SPEED_FULL)) &&
-+ (_urb->dev->tt) && (_urb->dev->tt->hub) && (_urb->dev->tt->hub->devnum != 1)) {
-+ DWC_DEBUGPL(DBG_HCD, "QH init: EP %d: TT found at hub addr %d, for port %d\n",
-+ usb_pipeendpoint(_urb->pipe), _urb->dev->tt->hub->devnum,
-+ _urb->dev->ttport);
-+ _qh->do_split = 1;
-+ }
-+
-+ if (_qh->ep_type == USB_ENDPOINT_XFER_INT ||
-+ _qh->ep_type == USB_ENDPOINT_XFER_ISOC) {
-+ /* Compute scheduling parameters once and save them. */
-+ hprt0_data_t hprt;
-+
-+ /** @todo Account for split transfers in the bus time. */
-+ int bytecount = dwc_hb_mult(_qh->maxp) * dwc_max_packet(_qh->maxp);
-+ _qh->usecs = NS_TO_US(usb_calc_bus_time(_urb->dev->speed,
-+ usb_pipein(_urb->pipe),
-+ (_qh->ep_type == USB_ENDPOINT_XFER_ISOC),bytecount));
-+
-+ /* Start in a slightly future (micro)frame. */
-+ _qh->sched_frame = dwc_frame_num_inc(_hcd->frame_number, SCHEDULE_SLOP);
-+ _qh->interval = _urb->interval;
-+#if 0
-+ /* Increase interrupt polling rate for debugging. */
-+ if (_qh->ep_type == USB_ENDPOINT_XFER_INT) {
-+ _qh->interval = 8;
-+ }
-+#endif
-+ hprt.d32 = dwc_read_reg32(_hcd->core_if->host_if->hprt0);
-+ if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) &&
-+ ((_urb->dev->speed == USB_SPEED_LOW) ||
-+ (_urb->dev->speed == USB_SPEED_FULL)))
-+ {
-+ _qh->interval *= 8;
-+ _qh->sched_frame |= 0x7;
-+ _qh->start_split_frame = _qh->sched_frame;
-+ }
-+ }
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n");
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - qh = %p\n", _qh);
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Device Address = %d\n",
-+ _urb->dev->devnum);
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Endpoint %d, %s\n",
-+ usb_pipeendpoint(_urb->pipe),
-+ usb_pipein(_urb->pipe) == USB_DIR_IN ? "IN" : "OUT");
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Speed = %s\n",
-+ ({ char *speed; switch (_urb->dev->speed) {
-+ case USB_SPEED_LOW: speed = "low"; break;
-+ case USB_SPEED_FULL: speed = "full"; break;
-+ case USB_SPEED_HIGH: speed = "high"; break;
-+ default: speed = "?"; break;
-+ }; speed;}));
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Type = %s\n",
-+ ({ char *type; switch (_qh->ep_type) {
-+ case USB_ENDPOINT_XFER_ISOC: type = "isochronous"; break;
-+ case USB_ENDPOINT_XFER_INT: type = "interrupt"; break;
-+ case USB_ENDPOINT_XFER_CONTROL: type = "control"; break;
-+ case USB_ENDPOINT_XFER_BULK: type = "bulk"; break;
-+ default: type = "?"; break;
-+ }; type;}));
-+#ifdef DEBUG
-+ if (_qh->ep_type == USB_ENDPOINT_XFER_INT) {
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n",
-+ _qh->usecs);
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n",
-+ _qh->interval);
-+ }
-+#endif
-+
-+ return;
-+}
-+
-+/**
-+ * Microframe scheduler
-+ * track the total use in hcd->frame_usecs
-+ * keep each qh use in qh->frame_usecs
-+ * when surrendering the qh then donate the time back
-+ */
-+const unsigned short max_uframe_usecs[]={ 100, 100, 100, 100, 100, 100, 30, 0 };
-+
-+/*
-+ * called from dwc_otg_hcd.c:dwc_otg_hcd_init
-+ */
-+int init_hcd_usecs(dwc_otg_hcd_t *_hcd)
-+{
-+ int i;
-+ for (i=0; i<8; i++) {
-+ _hcd->frame_usecs[i] = max_uframe_usecs[i];
-+ }
-+ return 0;
-+}
-+
-+static int find_single_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
-+{
-+ int i;
-+ unsigned short utime;
-+ int t_left;
-+ int ret;
-+ int done;
-+
-+ ret = -1;
-+ utime = _qh->usecs;
-+ t_left = utime;
-+ i = 0;
-+ done = 0;
-+ while (done == 0) {
-+ /* At the start _hcd->frame_usecs[i] = max_uframe_usecs[i]; */
-+ if (utime <= _hcd->frame_usecs[i]) {
-+ _hcd->frame_usecs[i] -= utime;
-+ _qh->frame_usecs[i] += utime;
-+ t_left -= utime;
-+ ret = i;
-+ done = 1;
-+ return ret;
-+ } else {
-+ i++;
-+ if (i == 8) {
-+ done = 1;
-+ ret = -1;
-+ }
-+ }
-+ }
-+ return ret;
-+}
-+
-+/*
-+ * use this for FS apps that can span multiple uframes
-+ */
-+static int find_multi_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
-+{
-+ int i;
-+ int j;
-+ unsigned short utime;
-+ int t_left;
-+ int ret;
-+ int done;
-+ unsigned short xtime;
-+
-+ ret = -1;
-+ utime = _qh->usecs;
-+ t_left = utime;
-+ i = 0;
-+ done = 0;
-+loop:
-+ while (done == 0) {
-+ if(_hcd->frame_usecs[i] <= 0) {
-+ i++;
-+ if (i == 8) {
-+ done = 1;
-+ ret = -1;
-+ }
-+ goto loop;
-+ }
-+
-+ /*
-+ * we need n consequtive slots
-+ * so use j as a start slot j plus j+1 must be enough time (for now)
-+ */
-+ xtime= _hcd->frame_usecs[i];
-+ for (j = i+1 ; j < 8 ; j++ ) {
-+ /*
-+ * if we add this frame remaining time to xtime we may
-+ * be OK, if not we need to test j for a complete frame
-+ */
-+ if ((xtime+_hcd->frame_usecs[j]) < utime) {
-+ if (_hcd->frame_usecs[j] < max_uframe_usecs[j]) {
-+ j = 8;
-+ ret = -1;
-+ continue;
-+ }
-+ }
-+ if (xtime >= utime) {
-+ ret = i;
-+ j = 8; /* stop loop with a good value ret */
-+ continue;
-+ }
-+ /* add the frame time to x time */
-+ xtime += _hcd->frame_usecs[j];
-+ /* we must have a fully available next frame or break */
-+ if ((xtime < utime)
-+ && (_hcd->frame_usecs[j] == max_uframe_usecs[j])) {
-+ ret = -1;
-+ j = 8; /* stop loop with a bad value ret */
-+ continue;
-+ }
-+ }
-+ if (ret >= 0) {
-+ t_left = utime;
-+ for (j = i; (t_left>0) && (j < 8); j++ ) {
-+ t_left -= _hcd->frame_usecs[j];
-+ if ( t_left <= 0 ) {
-+ _qh->frame_usecs[j] += _hcd->frame_usecs[j] + t_left;
-+ _hcd->frame_usecs[j]= -t_left;
-+ ret = i;
-+ done = 1;
-+ } else {
-+ _qh->frame_usecs[j] += _hcd->frame_usecs[j];
-+ _hcd->frame_usecs[j] = 0;
-+ }
-+ }
-+ } else {
-+ i++;
-+ if (i == 8) {
-+ done = 1;
-+ ret = -1;
-+ }
-+ }
-+ }
-+ return ret;
-+}
-+
-+static int find_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
-+{
-+ int ret;
-+ ret = -1;
-+
-+ if (_qh->speed == USB_SPEED_HIGH) {
-+ /* if this is a hs transaction we need a full frame */
-+ ret = find_single_uframe(_hcd, _qh);
-+ } else {
-+ /* if this is a fs transaction we may need a sequence of frames */
-+ ret = find_multi_uframe(_hcd, _qh);
-+ }
-+ return ret;
-+}
-+
-+/**
-+ * Checks that the max transfer size allowed in a host channel is large enough
-+ * to handle the maximum data transfer in a single (micro)frame for a periodic
-+ * transfer.
-+ *
-+ * @param _hcd The HCD state structure for the DWC OTG controller.
-+ * @param _qh QH for a periodic endpoint.
-+ *
-+ * @return 0 if successful, negative error code otherwise.
-+ */
-+static int check_max_xfer_size(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
-+{
-+ int status;
-+ uint32_t max_xfer_size;
-+ uint32_t max_channel_xfer_size;
-+
-+ status = 0;
-+
-+ max_xfer_size = dwc_max_packet(_qh->maxp) * dwc_hb_mult(_qh->maxp);
-+ max_channel_xfer_size = _hcd->core_if->core_params->max_transfer_size;
-+
-+ if (max_xfer_size > max_channel_xfer_size) {
-+ DWC_NOTICE("%s: Periodic xfer length %d > "
-+ "max xfer length for channel %d\n",
-+ __func__, max_xfer_size, max_channel_xfer_size);
-+ status = -ENOSPC;
-+ }
-+
-+ return status;
-+}
-+
-+/**
-+ * Schedules an interrupt or isochronous transfer in the periodic schedule.
-+ *
-+ * @param _hcd The HCD state structure for the DWC OTG controller.
-+ * @param _qh QH for the periodic transfer. The QH should already contain the
-+ * scheduling information.
-+ *
-+ * @return 0 if successful, negative error code otherwise.
-+ */
-+static int schedule_periodic(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
-+{
-+ int status = 0;
-+
-+ int frame;
-+ status = find_uframe(_hcd, _qh);
-+ frame = -1;
-+ if (status == 0) {
-+ frame = 7;
-+ } else {
-+ if (status > 0 )
-+ frame = status-1;
-+ }
-+
-+ /* Set the new frame up */
-+ if (frame > -1) {
-+ _qh->sched_frame &= ~0x7;
-+ _qh->sched_frame |= (frame & 7);
-+ }
-+
-+ if (status != -1 )
-+ status = 0;
-+ if (status) {
-+ DWC_NOTICE("%s: Insufficient periodic bandwidth for "
-+ "periodic transfer.\n", __func__);
-+ return status;
-+ }
-+
-+ status = check_max_xfer_size(_hcd, _qh);
-+ if (status) {
-+ DWC_NOTICE("%s: Channel max transfer size too small "
-+ "for periodic transfer.\n", __func__);
-+ return status;
-+ }
-+
-+ /* Always start in the inactive schedule. */
-+ list_add_tail(&_qh->qh_list_entry, &_hcd->periodic_sched_inactive);
-+
-+
-+ /* Update claimed usecs per (micro)frame. */
-+ _hcd->periodic_usecs += _qh->usecs;
-+
-+ /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */
-+ hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_allocated += _qh->usecs / _qh->interval;
-+ if (_qh->ep_type == USB_ENDPOINT_XFER_INT) {
-+ hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_int_reqs++;
-+ DWC_DEBUGPL(DBG_HCD, "Scheduled intr: qh %p, usecs %d, period %d\n",
-+ _qh, _qh->usecs, _qh->interval);
-+ } else {
-+ hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_isoc_reqs++;
-+ DWC_DEBUGPL(DBG_HCD, "Scheduled isoc: qh %p, usecs %d, period %d\n",
-+ _qh, _qh->usecs, _qh->interval);
-+ }
-+
-+ return status;
-+}
-+
-+/**
-+ * This function adds a QH to either the non periodic or periodic schedule if
-+ * it is not already in the schedule. If the QH is already in the schedule, no
-+ * action is taken.
-+ *
-+ * @return 0 if successful, negative error code otherwise.
-+ */
-+int dwc_otg_hcd_qh_add (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
-+{
-+ unsigned long flags;
-+ int status = 0;
-+
-+ local_irq_save(flags);
-+
-+ if (!list_empty(&_qh->qh_list_entry)) {
-+ /* QH already in a schedule. */
-+ goto done;
-+ }
-+
-+ /* Add the new QH to the appropriate schedule */
-+ if (dwc_qh_is_non_per(_qh)) {
-+ /* Always start in the inactive schedule. */
-+ list_add_tail(&_qh->qh_list_entry, &_hcd->non_periodic_sched_inactive);
-+ } else {
-+ status = schedule_periodic(_hcd, _qh);
-+ }
-+
-+ done:
-+ local_irq_restore(flags);
-+
-+ return status;
-+}
-+
-+/**
-+ * This function adds a QH to the non periodic deferred schedule.
-+ *
-+ * @return 0 if successful, negative error code otherwise.
-+ */
-+int dwc_otg_hcd_qh_add_deferred(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
-+{
-+ unsigned long flags;
-+ local_irq_save(flags);
-+ if (!list_empty(&_qh->qh_list_entry)) {
-+ /* QH already in a schedule. */
-+ goto done;
-+ }
-+
-+ /* Add the new QH to the non periodic deferred schedule */
-+ if (dwc_qh_is_non_per(_qh)) {
-+ list_add_tail(&_qh->qh_list_entry,
-+ &_hcd->non_periodic_sched_deferred);
-+ }
-+done:
-+ local_irq_restore(flags);
-+ return 0;
-+}
-+
-+/**
-+ * Removes an interrupt or isochronous transfer from the periodic schedule.
-+ *
-+ * @param _hcd The HCD state structure for the DWC OTG controller.
-+ * @param _qh QH for the periodic transfer.
-+ */
-+static void deschedule_periodic(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
-+{
-+ int i;
-+ list_del_init(&_qh->qh_list_entry);
-+
-+
-+ /* Update claimed usecs per (micro)frame. */
-+ _hcd->periodic_usecs -= _qh->usecs;
-+
-+ for (i = 0; i < 8; i++) {
-+ _hcd->frame_usecs[i] += _qh->frame_usecs[i];
-+ _qh->frame_usecs[i] = 0;
-+ }
-+ /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */
-+ hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_allocated -= _qh->usecs / _qh->interval;
-+
-+ if (_qh->ep_type == USB_ENDPOINT_XFER_INT) {
-+ hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_int_reqs--;
-+ DWC_DEBUGPL(DBG_HCD, "Descheduled intr: qh %p, usecs %d, period %d\n",
-+ _qh, _qh->usecs, _qh->interval);
-+ } else {
-+ hcd_to_bus(dwc_otg_hcd_to_hcd(_hcd))->bandwidth_isoc_reqs--;
-+ DWC_DEBUGPL(DBG_HCD, "Descheduled isoc: qh %p, usecs %d, period %d\n",
-+ _qh, _qh->usecs, _qh->interval);
-+ }
-+}
-+
-+/**
-+ * Removes a QH from either the non-periodic or periodic schedule. Memory is
-+ * not freed.
-+ *
-+ * @param[in] _hcd The HCD state structure.
-+ * @param[in] _qh QH to remove from schedule. */
-+void dwc_otg_hcd_qh_remove (dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh)
-+{
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+
-+ if (list_empty(&_qh->qh_list_entry)) {
-+ /* QH is not in a schedule. */
-+ goto done;
-+ }
-+
-+ if (dwc_qh_is_non_per(_qh)) {
-+ if (_hcd->non_periodic_qh_ptr == &_qh->qh_list_entry) {
-+ _hcd->non_periodic_qh_ptr = _hcd->non_periodic_qh_ptr->next;
-+ }
-+ list_del_init(&_qh->qh_list_entry);
-+ } else {
-+ deschedule_periodic(_hcd, _qh);
-+ }
-+
-+ done:
-+ local_irq_restore(flags);
-+}
-+
-+/**
-+ * Defers a QH. For non-periodic QHs, removes the QH from the active
-+ * non-periodic schedule. The QH is added to the deferred non-periodic
-+ * schedule if any QTDs are still attached to the QH.
-+ */
-+int dwc_otg_hcd_qh_deferr(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh, int delay)
-+{
-+ int deact = 1;
-+ unsigned long flags;
-+ local_irq_save(flags);
-+ if (dwc_qh_is_non_per(_qh)) {
-+ _qh->sched_frame =
-+ dwc_frame_num_inc(_hcd->frame_number,
-+ delay);
-+ _qh->channel = NULL;
-+ _qh->qtd_in_process = NULL;
-+ deact = 0;
-+ dwc_otg_hcd_qh_remove(_hcd, _qh);
-+ if (!list_empty(&_qh->qtd_list)) {
-+ /* Add back to deferred non-periodic schedule. */
-+ dwc_otg_hcd_qh_add_deferred(_hcd, _qh);
-+ }
-+ }
-+ local_irq_restore(flags);
-+ return deact;
-+}
-+
-+/**
-+ * Deactivates a QH. For non-periodic QHs, removes the QH from the active
-+ * non-periodic schedule. The QH is added to the inactive non-periodic
-+ * schedule if any QTDs are still attached to the QH.
-+ *
-+ * For periodic QHs, the QH is removed from the periodic queued schedule. If
-+ * there are any QTDs still attached to the QH, the QH is added to either the
-+ * periodic inactive schedule or the periodic ready schedule and its next
-+ * scheduled frame is calculated. The QH is placed in the ready schedule if
-+ * the scheduled frame has been reached already. Otherwise it's placed in the
-+ * inactive schedule. If there are no QTDs attached to the QH, the QH is
-+ * completely removed from the periodic schedule.
-+ */
-+void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t *_hcd, dwc_otg_qh_t *_qh, int sched_next_periodic_split)
-+{
-+ unsigned long flags;
-+ local_irq_save(flags);
-+
-+ if (dwc_qh_is_non_per(_qh)) {
-+ dwc_otg_hcd_qh_remove(_hcd, _qh);
-+ if (!list_empty(&_qh->qtd_list)) {
-+ /* Add back to inactive non-periodic schedule. */
-+ dwc_otg_hcd_qh_add(_hcd, _qh);
-+ }
-+ } else {
-+ uint16_t frame_number = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(_hcd));
-+
-+ if (_qh->do_split) {
-+ /* Schedule the next continuing periodic split transfer */
-+ if (sched_next_periodic_split) {
-+
-+ _qh->sched_frame = frame_number;
-+ if (dwc_frame_num_le(frame_number,
-+ dwc_frame_num_inc(_qh->start_split_frame, 1))) {
-+ /*
-+ * Allow one frame to elapse after start
-+ * split microframe before scheduling
-+ * complete split, but DONT if we are
-+ * doing the next start split in the
-+ * same frame for an ISOC out.
-+ */
-+ if ((_qh->ep_type != USB_ENDPOINT_XFER_ISOC) || (_qh->ep_is_in != 0)) {
-+ _qh->sched_frame = dwc_frame_num_inc(_qh->sched_frame, 1);
-+ }
-+ }
-+ } else {
-+ _qh->sched_frame = dwc_frame_num_inc(_qh->start_split_frame,
-+ _qh->interval);
-+ if (dwc_frame_num_le(_qh->sched_frame, frame_number)) {
-+ _qh->sched_frame = frame_number;
-+ }
-+ _qh->sched_frame |= 0x7;
-+ _qh->start_split_frame = _qh->sched_frame;
-+ }
-+ } else {
-+ _qh->sched_frame = dwc_frame_num_inc(_qh->sched_frame, _qh->interval);
-+ if (dwc_frame_num_le(_qh->sched_frame, frame_number)) {
-+ _qh->sched_frame = frame_number;
-+ }
-+ }
-+
-+ if (list_empty(&_qh->qtd_list)) {
-+ dwc_otg_hcd_qh_remove(_hcd, _qh);
-+ } else {
-+ /*
-+ * Remove from periodic_sched_queued and move to
-+ * appropriate queue.
-+ */
-+ if (dwc_frame_num_le(_qh->sched_frame, frame_number)) {
-+ list_move(&_qh->qh_list_entry,
-+ &_hcd->periodic_sched_ready);
-+ } else {
-+ list_move(&_qh->qh_list_entry,
-+ &_hcd->periodic_sched_inactive);
-+ }
-+ }
-+ }
-+
-+ local_irq_restore(flags);
-+}
-+
-+/**
-+ * This function allocates and initializes a QTD.
-+ *
-+ * @param[in] _urb The URB to create a QTD from. Each URB-QTD pair will end up
-+ * pointing to each other so each pair should have a unique correlation.
-+ *
-+ * @return Returns pointer to the newly allocated QTD, or NULL on error. */
-+dwc_otg_qtd_t *dwc_otg_hcd_qtd_create (struct urb *_urb)
-+{
-+ dwc_otg_qtd_t *qtd;
-+
-+ qtd = dwc_otg_hcd_qtd_alloc ();
-+ if (qtd == NULL) {
-+ return NULL;
-+ }
-+
-+ dwc_otg_hcd_qtd_init (qtd, _urb);
-+ return qtd;
-+}
-+
-+/**
-+ * Initializes a QTD structure.
-+ *
-+ * @param[in] _qtd The QTD to initialize.
-+ * @param[in] _urb The URB to use for initialization. */
-+void dwc_otg_hcd_qtd_init (dwc_otg_qtd_t *_qtd, struct urb *_urb)
-+{
-+ memset (_qtd, 0, sizeof (dwc_otg_qtd_t));
-+ _qtd->urb = _urb;
-+ if (usb_pipecontrol(_urb->pipe)) {
-+ /*
-+ * The only time the QTD data toggle is used is on the data
-+ * phase of control transfers. This phase always starts with
-+ * DATA1.
-+ */
-+ _qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
-+ _qtd->control_phase = DWC_OTG_CONTROL_SETUP;
-+ }
-+
-+ /* start split */
-+ _qtd->complete_split = 0;
-+ _qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
-+ _qtd->isoc_split_offset = 0;
-+
-+ /* Store the qtd ptr in the urb to reference what QTD. */
-+ _urb->hcpriv = _qtd;
-+ return;
-+}
-+
-+/**
-+ * This function adds a QTD to the QTD-list of a QH. It will find the correct
-+ * QH to place the QTD into. If it does not find a QH, then it will create a
-+ * new QH. If the QH to which the QTD is added is not currently scheduled, it
-+ * is placed into the proper schedule based on its EP type.
-+ *
-+ * @param[in] _qtd The QTD to add
-+ * @param[in] _dwc_otg_hcd The DWC HCD structure
-+ *
-+ * @return 0 if successful, negative error code otherwise.
-+ */
-+int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * _qtd, dwc_otg_hcd_t * _dwc_otg_hcd)
-+{
-+ struct usb_host_endpoint *ep;
-+ dwc_otg_qh_t *qh;
-+ unsigned long flags;
-+ int retval = 0;
-+ struct urb *urb = _qtd->urb;
-+
-+ local_irq_save(flags);
-+
-+ /*
-+ * Get the QH which holds the QTD-list to insert to. Create QH if it
-+ * doesn't exist.
-+ */
-+ ep = dwc_urb_to_endpoint(urb);
-+ qh = (dwc_otg_qh_t *)ep->hcpriv;
-+ if (qh == NULL) {
-+ qh = dwc_otg_hcd_qh_create (_dwc_otg_hcd, urb);
-+ if (qh == NULL) {
-+ retval = -1;
-+ goto done;
-+ }
-+ ep->hcpriv = qh;
-+ }
-+
-+ _qtd->qtd_qh_ptr = qh;
-+ retval = dwc_otg_hcd_qh_add(_dwc_otg_hcd, qh);
-+ if (retval == 0) {
-+ list_add_tail(&_qtd->qtd_list_entry, &qh->qtd_list);
-+ }
-+
-+ done:
-+ local_irq_restore(flags);
-+ return retval;
-+}
-+
-+#endif /* DWC_DEVICE_ONLY */
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_ifx.c
-@@ -0,0 +1,100 @@
-+/******************************************************************************
-+**
-+** FILE NAME : dwc_otg_ifx.c
-+** PROJECT : Twinpass/Danube
-+** MODULES : DWC OTG USB
-+**
-+** DATE : 12 Auguest 2007
-+** AUTHOR : Sung Winder
-+** DESCRIPTION : Platform specific initialization.
-+** COPYRIGHT : Copyright (c) 2007
-+** Infineon Technologies AG
-+** 2F, No.2, Li-Hsin Rd., Hsinchu Science Park,
-+** Hsin-chu City, 300 Taiwan.
-+**
-+** This program is free software; you can redistribute it and/or modify
-+** it under the terms of the GNU General Public License as published by
-+** the Free Software Foundation; either version 2 of the License, or
-+** (at your option) any later version.
-+**
-+** HISTORY
-+** $Date $Author $Comment
-+** 12 Auguest 2007 Sung Winder Initiate Version
-+*******************************************************************************/
-+#include "dwc_otg_ifx.h"
-+
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+#include <linux/ioport.h>
-+#include <linux/gpio.h>
-+
-+#include <asm/io.h>
-+//#include <asm/mach-ifxmips/ifxmips.h>
-+#include <lantiq_soc.h>
-+
-+#define IFXMIPS_GPIO_BASE_ADDR (0xBE100B00)
-+
-+#define IFXMIPS_GPIO_P0_OUT ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0010))
-+#define IFXMIPS_GPIO_P1_OUT ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0040))
-+#define IFXMIPS_GPIO_P0_IN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0014))
-+#define IFXMIPS_GPIO_P1_IN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0044))
-+#define IFXMIPS_GPIO_P0_DIR ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0018))
-+#define IFXMIPS_GPIO_P1_DIR ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0048))
-+#define IFXMIPS_GPIO_P0_ALTSEL0 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x001C))
-+#define IFXMIPS_GPIO_P1_ALTSEL0 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x004C))
-+#define IFXMIPS_GPIO_P0_ALTSEL1 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0020))
-+#define IFXMIPS_GPIO_P1_ALTSEL1 ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0050))
-+#define IFXMIPS_GPIO_P0_OD ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0024))
-+#define IFXMIPS_GPIO_P1_OD ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0054))
-+#define IFXMIPS_GPIO_P0_STOFF ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0028))
-+#define IFXMIPS_GPIO_P1_STOFF ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0058))
-+#define IFXMIPS_GPIO_P0_PUDSEL ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x002C))
-+#define IFXMIPS_GPIO_P1_PUDSEL ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x005C))
-+#define IFXMIPS_GPIO_P0_PUDEN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0030))
-+#define IFXMIPS_GPIO_P1_PUDEN ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0060))
-+
-+
-+#define writel ltq_w32
-+#define readl ltq_r32
-+void dwc_otg_power_on (void)
-+{
-+ // clear power
-+ writel(readl(DANUBE_PMU_PWDCR) | 0x41, DANUBE_PMU_PWDCR);
-+ // set clock gating
-+ writel(readl(DANUBE_CGU_IFCCR) | 0x30, DANUBE_CGU_IFCCR);
-+ // set power
-+ writel(readl(DANUBE_PMU_PWDCR) & ~0x1, DANUBE_PMU_PWDCR);
-+ writel(readl(DANUBE_PMU_PWDCR) & ~0x40, DANUBE_PMU_PWDCR);
-+ writel(readl(DANUBE_PMU_PWDCR) & ~0x8000, DANUBE_PMU_PWDCR);
-+
-+#if 1//defined (DWC_HOST_ONLY)
-+ // make the hardware be a host controller (default)
-+ //clear_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_UBSCFG);
-+ writel(readl(DANUBE_RCU_UBSCFG) & ~(1<<DANUBE_USBCFG_HDSEL_BIT), DANUBE_RCU_UBSCFG);
-+
-+ //#elif defined (DWC_DEVICE_ONLY)
-+ /* set the controller to the device mode */
-+ // set_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_UBSCFG);
-+#else
-+#error "For Danube/Twinpass, it should be HOST or Device Only."
-+#endif
-+
-+ // set the HC's byte-order to big-endian
-+ //set_bit (DANUBE_USBCFG_HOST_END_BIT, (volatile unsigned long *)DANUBE_RCU_UBSCFG);
-+ writel(readl(DANUBE_RCU_UBSCFG) | (1<<DANUBE_USBCFG_HOST_END_BIT), DANUBE_RCU_UBSCFG);
-+ //clear_bit (DANUBE_USBCFG_SLV_END_BIT, (volatile unsigned long *)DANUBE_RCU_UBSCFG);
-+ writel(readl(DANUBE_RCU_UBSCFG) & ~(1<<DANUBE_USBCFG_SLV_END_BIT), DANUBE_RCU_UBSCFG);
-+ //writel(0x400, DANUBE_RCU_UBSCFG);
-+
-+ // PHY configurations.
-+ writel (0x14014, (volatile unsigned long *)0xbe10103c);
-+}
-+
-+int ifx_usb_hc_init(unsigned long base_addr, int irq)
-+{
-+ return 0;
-+}
-+
-+void ifx_usb_hc_remove(void)
-+{
-+}
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_ifx.h
-@@ -0,0 +1,85 @@
-+/******************************************************************************
-+**
-+** FILE NAME : dwc_otg_ifx.h
-+** PROJECT : Twinpass/Danube
-+** MODULES : DWC OTG USB
-+**
-+** DATE : 12 April 2007
-+** AUTHOR : Sung Winder
-+** DESCRIPTION : Platform specific initialization.
-+** COPYRIGHT : Copyright (c) 2007
-+** Infineon Technologies AG
-+** 2F, No.2, Li-Hsin Rd., Hsinchu Science Park,
-+** Hsin-chu City, 300 Taiwan.
-+**
-+** This program is free software; you can redistribute it and/or modify
-+** it under the terms of the GNU General Public License as published by
-+** the Free Software Foundation; either version 2 of the License, or
-+** (at your option) any later version.
-+**
-+** HISTORY
-+** $Date $Author $Comment
-+** 12 April 2007 Sung Winder Initiate Version
-+*******************************************************************************/
-+#if !defined(__DWC_OTG_IFX_H__)
-+#define __DWC_OTG_IFX_H__
-+
-+#include <linux/irq.h>
-+#include <irq.h>
-+
-+// 20070316, winder added.
-+#ifndef SZ_256K
-+#define SZ_256K 0x00040000
-+#endif
-+
-+extern void dwc_otg_power_on (void);
-+
-+/* FIXME: The current Linux-2.6 do not have these header files, but anyway, we need these. */
-+// #include <asm/danube/danube.h>
-+// #include <asm/ifx/irq.h>
-+
-+/* winder, I used the Danube parameter as default. *
-+ * We could change this through module param. */
-+#define IFX_USB_IOMEM_BASE 0x1e101000
-+#define IFX_USB_IOMEM_SIZE SZ_256K
-+#define IFX_USB_IRQ LTQ_USB_INT
-+
-+/**
-+ * This function is called to set correct clock gating and power.
-+ * For Twinpass/Danube board.
-+ */
-+#ifndef DANUBE_RCU_BASE_ADDR
-+#define DANUBE_RCU_BASE_ADDR (0xBF203000)
-+#endif
-+
-+#ifndef DANUBE_CGU
-+#define DANUBE_CGU (0xBF103000)
-+#endif
-+#ifndef DANUBE_CGU_IFCCR
-+/***CGU Interface Clock Control Register***/
-+#define DANUBE_CGU_IFCCR ((volatile u32*)(DANUBE_CGU+ 0x0018))
-+#endif
-+
-+#ifndef DANUBE_PMU
-+#define DANUBE_PMU (KSEG1+0x1F102000)
-+#endif
-+#ifndef DANUBE_PMU_PWDCR
-+/* PMU Power down Control Register */
-+#define DANUBE_PMU_PWDCR ((volatile u32*)(DANUBE_PMU+0x001C))
-+#endif
-+
-+
-+#define DANUBE_RCU_UBSCFG ((volatile u32*)(DANUBE_RCU_BASE_ADDR + 0x18))
-+#define DANUBE_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
-+#define DANUBE_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
-+#define DANUBE_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end
-+
-+extern void ltq_mask_and_ack_irq(struct irq_data *d);
-+
-+static void inline mask_and_ack_ifx_irq(int x)
-+{
-+ struct irq_data d;
-+ d.irq = x;
-+ ltq_mask_and_ack_irq(&d);
-+}
-+#endif //__DWC_OTG_IFX_H__
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_plat.h
-@@ -0,0 +1,269 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/platform/dwc_otg_plat.h $
-+ * $Revision: 1.1.1.1 $
-+ * $Date: 2009-04-17 06:15:34 $
-+ * $Change: 510301 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+#if !defined(__DWC_OTG_PLAT_H__)
-+#define __DWC_OTG_PLAT_H__
-+
-+#include <linux/types.h>
-+#include <linux/slab.h>
-+#include <linux/list.h>
-+#include <linux/delay.h>
-+#include <asm/io.h>
-+
-+/**
-+ * @file
-+ *
-+ * This file contains the Platform Specific constants, interfaces
-+ * (functions and macros) for Linux.
-+ *
-+ */
-+/*#if !defined(__LINUX__)
-+#error "The contents of this file is Linux specific!!!"
-+#endif
-+*/
-+#include <lantiq_soc.h>
-+#define writel ltq_w32
-+#define readl ltq_r32
-+
-+/**
-+ * Reads the content of a register.
-+ *
-+ * @param _reg address of register to read.
-+ * @return contents of the register.
-+ *
-+
-+ * Usage:<br>
-+ * <code>uint32_t dev_ctl = dwc_read_reg32(&dev_regs->dctl);</code>
-+ */
-+static __inline__ uint32_t dwc_read_reg32( volatile uint32_t *_reg)
-+{
-+ return readl(_reg);
-+};
-+
-+/**
-+ * Writes a register with a 32 bit value.
-+ *
-+ * @param _reg address of register to read.
-+ * @param _value to write to _reg.
-+ *
-+ * Usage:<br>
-+ * <code>dwc_write_reg32(&dev_regs->dctl, 0); </code>
-+ */
-+static __inline__ void dwc_write_reg32( volatile uint32_t *_reg, const uint32_t _value)
-+{
-+ writel( _value, _reg );
-+};
-+
-+/**
-+ * This function modifies bit values in a register. Using the
-+ * algorithm: (reg_contents & ~clear_mask) | set_mask.
-+ *
-+ * @param _reg address of register to read.
-+ * @param _clear_mask bit mask to be cleared.
-+ * @param _set_mask bit mask to be set.
-+ *
-+ * Usage:<br>
-+ * <code> // Clear the SOF Interrupt Mask bit and <br>
-+ * // set the OTG Interrupt mask bit, leaving all others as they were.
-+ * dwc_modify_reg32(&dev_regs->gintmsk, DWC_SOF_INT, DWC_OTG_INT);</code>
-+ */
-+static __inline__
-+ void dwc_modify_reg32( volatile uint32_t *_reg, const uint32_t _clear_mask, const uint32_t _set_mask)
-+{
-+ writel( (readl(_reg) & ~_clear_mask) | _set_mask, _reg );
-+};
-+
-+
-+/**
-+ * Wrapper for the OS micro-second delay function.
-+ * @param[in] _usecs Microseconds of delay
-+ */
-+static __inline__ void UDELAY( const uint32_t _usecs )
-+{
-+ udelay( _usecs );
-+}
-+
-+/**
-+ * Wrapper for the OS milli-second delay function.
-+ * @param[in] _msecs milliseconds of delay
-+ */
-+static __inline__ void MDELAY( const uint32_t _msecs )
-+{
-+ mdelay( _msecs );
-+}
-+
-+/**
-+ * Wrapper for the Linux spin_lock. On the ARM (Integrator)
-+ * spin_lock() is a nop.
-+ *
-+ * @param _lock Pointer to the spinlock.
-+ */
-+static __inline__ void SPIN_LOCK( spinlock_t *_lock )
-+{
-+ spin_lock(_lock);
-+}
-+
-+/**
-+ * Wrapper for the Linux spin_unlock. On the ARM (Integrator)
-+ * spin_lock() is a nop.
-+ *
-+ * @param _lock Pointer to the spinlock.
-+ */
-+static __inline__ void SPIN_UNLOCK( spinlock_t *_lock )
-+{
-+ spin_unlock(_lock);
-+}
-+
-+/**
-+ * Wrapper (macro) for the Linux spin_lock_irqsave. On the ARM
-+ * (Integrator) spin_lock() is a nop.
-+ *
-+ * @param _l Pointer to the spinlock.
-+ * @param _f unsigned long for irq flags storage.
-+ */
-+#define SPIN_LOCK_IRQSAVE( _l, _f ) { \
-+ spin_lock_irqsave(_l,_f); \
-+ }
-+
-+/**
-+ * Wrapper (macro) for the Linux spin_unlock_irqrestore. On the ARM
-+ * (Integrator) spin_lock() is a nop.
-+ *
-+ * @param _l Pointer to the spinlock.
-+ * @param _f unsigned long for irq flags storage.
-+ */
-+#define SPIN_UNLOCK_IRQRESTORE( _l,_f ) {\
-+ spin_unlock_irqrestore(_l,_f); \
-+ }
-+
-+
-+/*
-+ * Debugging support vanishes in non-debug builds.
-+ */
-+
-+
-+/**
-+ * The Debug Level bit-mask variable.
-+ */
-+extern uint32_t g_dbg_lvl;
-+/**
-+ * Set the Debug Level variable.
-+ */
-+static inline uint32_t SET_DEBUG_LEVEL( const uint32_t _new )
-+{
-+ uint32_t old = g_dbg_lvl;
-+ g_dbg_lvl = _new;
-+ return old;
-+}
-+
-+/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */
-+#define DBG_CIL (0x2)
-+/** When debug level has the DBG_CILV bit set, display CIL Verbose debug
-+ * messages */
-+#define DBG_CILV (0x20)
-+/** When debug level has the DBG_PCD bit set, display PCD (Device) debug
-+ * messages */
-+#define DBG_PCD (0x4)
-+/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug
-+ * messages */
-+#define DBG_PCDV (0x40)
-+/** When debug level has the DBG_HCD bit set, display Host debug messages */
-+#define DBG_HCD (0x8)
-+/** When debug level has the DBG_HCDV bit set, display Verbose Host debug
-+ * messages */
-+#define DBG_HCDV (0x80)
-+/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host
-+ * mode. */
-+#define DBG_HCD_URB (0x800)
-+
-+/** When debug level has any bit set, display debug messages */
-+#define DBG_ANY (0xFF)
-+
-+/** All debug messages off */
-+#define DBG_OFF 0
-+
-+/** Prefix string for DWC_DEBUG print macros. */
-+#define USB_DWC "DWC_otg: "
-+
-+/**
-+ * Print a debug message when the Global debug level variable contains
-+ * the bit defined in <code>lvl</code>.
-+ *
-+ * @param[in] lvl - Debug level, use one of the DBG_ constants above.
-+ * @param[in] x - like printf
-+ *
-+ * Example:<p>
-+ * <code>
-+ * DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr);
-+ * </code>
-+ * <br>
-+ * results in:<br>
-+ * <code>
-+ * usb-DWC_otg: dwc_otg_cil_init(ca867000)
-+ * </code>
-+ */
-+#ifdef DEBUG
-+
-+# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)printk( KERN_DEBUG USB_DWC x ); }while(0)
-+# define DWC_DEBUGP(x...) DWC_DEBUGPL(DBG_ANY, x )
-+
-+# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl)
-+
-+#else
-+
-+# define DWC_DEBUGPL(lvl, x...) do{}while(0)
-+# define DWC_DEBUGP(x...)
-+
-+# define CHK_DEBUG_LEVEL(level) (0)
-+
-+#endif /*DEBUG*/
-+
-+/**
-+ * Print an Error message.
-+ */
-+#define DWC_ERROR(x...) printk( KERN_ERR USB_DWC x )
-+/**
-+ * Print a Warning message.
-+ */
-+#define DWC_WARN(x...) printk( KERN_WARNING USB_DWC x )
-+/**
-+ * Print a notice (normal but significant message).
-+ */
-+#define DWC_NOTICE(x...) printk( KERN_NOTICE USB_DWC x )
-+/**
-+ * Basic message printing.
-+ */
-+#define DWC_PRINT(x...) printk( KERN_INFO USB_DWC x )
-+
-+#endif
-+
---- /dev/null
-+++ b/drivers/usb/dwc_otg/dwc_otg_regs.h
-@@ -0,0 +1,1797 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_regs.h $
-+ * $Revision: 1.1.1.1 $
-+ * $Date: 2009-04-17 06:15:34 $
-+ * $Change: 631780 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+#ifndef __DWC_OTG_REGS_H__
-+#define __DWC_OTG_REGS_H__
-+
-+/**
-+ * @file
-+ *
-+ * This file contains the data structures for accessing the DWC_otg core registers.
-+ *
-+ * The application interfaces with the HS OTG core by reading from and
-+ * writing to the Control and Status Register (CSR) space through the
-+ * AHB Slave interface. These registers are 32 bits wide, and the
-+ * addresses are 32-bit-block aligned.
-+ * CSRs are classified as follows:
-+ * - Core Global Registers
-+ * - Device Mode Registers
-+ * - Device Global Registers
-+ * - Device Endpoint Specific Registers
-+ * - Host Mode Registers
-+ * - Host Global Registers
-+ * - Host Port CSRs
-+ * - Host Channel Specific Registers
-+ *
-+ * Only the Core Global registers can be accessed in both Device and
-+ * Host modes. When the HS OTG core is operating in one mode, either
-+ * Device or Host, the application must not access registers from the
-+ * other mode. When the core switches from one mode to another, the
-+ * registers in the new mode of operation must be reprogrammed as they
-+ * would be after a power-on reset.
-+ */
-+
-+/****************************************************************************/
-+/** DWC_otg Core registers .
-+ * The dwc_otg_core_global_regs structure defines the size
-+ * and relative field offsets for the Core Global registers.
-+ */
-+typedef struct dwc_otg_core_global_regs
-+{
-+ /** OTG Control and Status Register. <i>Offset: 000h</i> */
-+ volatile uint32_t gotgctl;
-+ /** OTG Interrupt Register. <i>Offset: 004h</i> */
-+ volatile uint32_t gotgint;
-+ /**Core AHB Configuration Register. <i>Offset: 008h</i> */
-+ volatile uint32_t gahbcfg;
-+#define DWC_GLBINTRMASK 0x0001
-+#define DWC_DMAENABLE 0x0020
-+#define DWC_NPTXEMPTYLVL_EMPTY 0x0080
-+#define DWC_NPTXEMPTYLVL_HALFEMPTY 0x0000
-+#define DWC_PTXEMPTYLVL_EMPTY 0x0100
-+#define DWC_PTXEMPTYLVL_HALFEMPTY 0x0000
-+
-+
-+ /**Core USB Configuration Register. <i>Offset: 00Ch</i> */
-+ volatile uint32_t gusbcfg;
-+ /**Core Reset Register. <i>Offset: 010h</i> */
-+ volatile uint32_t grstctl;
-+ /**Core Interrupt Register. <i>Offset: 014h</i> */
-+ volatile uint32_t gintsts;
-+ /**Core Interrupt Mask Register. <i>Offset: 018h</i> */
-+ volatile uint32_t gintmsk;
-+ /**Receive Status Queue Read Register (Read Only). <i>Offset: 01Ch</i> */
-+ volatile uint32_t grxstsr;
-+ /**Receive Status Queue Read & POP Register (Read Only). <i>Offset: 020h</i>*/
-+ volatile uint32_t grxstsp;
-+ /**Receive FIFO Size Register. <i>Offset: 024h</i> */
-+ volatile uint32_t grxfsiz;
-+ /**Non Periodic Transmit FIFO Size Register. <i>Offset: 028h</i> */
-+ volatile uint32_t gnptxfsiz;
-+ /**Non Periodic Transmit FIFO/Queue Status Register (Read
-+ * Only). <i>Offset: 02Ch</i> */
-+ volatile uint32_t gnptxsts;
-+ /**I2C Access Register. <i>Offset: 030h</i> */
-+ volatile uint32_t gi2cctl;
-+ /**PHY Vendor Control Register. <i>Offset: 034h</i> */
-+ volatile uint32_t gpvndctl;
-+ /**General Purpose Input/Output Register. <i>Offset: 038h</i> */
-+ volatile uint32_t ggpio;
-+ /**User ID Register. <i>Offset: 03Ch</i> */
-+ volatile uint32_t guid;
-+ /**Synopsys ID Register (Read Only). <i>Offset: 040h</i> */
-+ volatile uint32_t gsnpsid;
-+ /**User HW Config1 Register (Read Only). <i>Offset: 044h</i> */
-+ volatile uint32_t ghwcfg1;
-+ /**User HW Config2 Register (Read Only). <i>Offset: 048h</i> */
-+ volatile uint32_t ghwcfg2;
-+#define DWC_SLAVE_ONLY_ARCH 0
-+#define DWC_EXT_DMA_ARCH 1
-+#define DWC_INT_DMA_ARCH 2
-+
-+#define DWC_MODE_HNP_SRP_CAPABLE 0
-+#define DWC_MODE_SRP_ONLY_CAPABLE 1
-+#define DWC_MODE_NO_HNP_SRP_CAPABLE 2
-+#define DWC_MODE_SRP_CAPABLE_DEVICE 3
-+#define DWC_MODE_NO_SRP_CAPABLE_DEVICE 4
-+#define DWC_MODE_SRP_CAPABLE_HOST 5
-+#define DWC_MODE_NO_SRP_CAPABLE_HOST 6
-+
-+ /**User HW Config3 Register (Read Only). <i>Offset: 04Ch</i> */
-+ volatile uint32_t ghwcfg3;
-+ /**User HW Config4 Register (Read Only). <i>Offset: 050h</i>*/
-+ volatile uint32_t ghwcfg4;
-+ /** Reserved <i>Offset: 054h-0FFh</i> */
-+ uint32_t reserved[43];
-+ /** Host Periodic Transmit FIFO Size Register. <i>Offset: 100h</i> */
-+ volatile uint32_t hptxfsiz;
-+ /** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled,
-+ otherwise Device Transmit FIFO#n Register.
-+ * <i>Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15).</i> */
-+ //volatile uint32_t dptxfsiz[15];
-+ volatile uint32_t dptxfsiz_dieptxf[15];
-+} dwc_otg_core_global_regs_t;
-+
-+/**
-+ * This union represents the bit fields of the Core OTG Control
-+ * and Status Register (GOTGCTL). Set the bits using the bit
-+ * fields then write the <i>d32</i> value to the register.
-+ */
-+typedef union gotgctl_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned reserved31_21 : 11;
-+ unsigned currmod : 1;
-+ unsigned bsesvld : 1;
-+ unsigned asesvld : 1;
-+ unsigned reserved17 : 1;
-+ unsigned conidsts : 1;
-+ unsigned reserved15_12 : 4;
-+ unsigned devhnpen : 1;
-+ unsigned hstsethnpen : 1;
-+ unsigned hnpreq : 1;
-+ unsigned hstnegscs : 1;
-+ unsigned reserved7_2 : 6;
-+ unsigned sesreq : 1;
-+ unsigned sesreqscs : 1;
-+ } b;
-+} gotgctl_data_t;
-+
-+/**
-+ * This union represents the bit fields of the Core OTG Interrupt Register
-+ * (GOTGINT). Set/clear the bits using the bit fields then write the <i>d32</i>
-+ * value to the register.
-+ */
-+typedef union gotgint_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** Current Mode */
-+ unsigned reserved31_20 : 12;
-+ /** Debounce Done */
-+ unsigned debdone : 1;
-+ /** A-Device Timeout Change */
-+ unsigned adevtoutchng : 1;
-+ /** Host Negotiation Detected */
-+ unsigned hstnegdet : 1;
-+ unsigned reserver16_10 : 7;
-+ /** Host Negotiation Success Status Change */
-+ unsigned hstnegsucstschng : 1;
-+ /** Session Request Success Status Change */
-+ unsigned sesreqsucstschng : 1;
-+ unsigned reserved3_7 : 5;
-+ /** Session End Detected */
-+ unsigned sesenddet : 1;
-+ /** Current Mode */
-+ unsigned reserved1_0 : 2;
-+ } b;
-+} gotgint_data_t;
-+
-+
-+/**
-+ * This union represents the bit fields of the Core AHB Configuration
-+ * Register (GAHBCFG). Set/clear the bits using the bit fields then
-+ * write the <i>d32</i> value to the register.
-+ */
-+typedef union gahbcfg_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY 1
-+#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0
-+ unsigned reserved9_31 : 23;
-+ unsigned ptxfemplvl : 1;
-+ unsigned nptxfemplvl_txfemplvl : 1;
-+#define DWC_GAHBCFG_DMAENABLE 1
-+ unsigned reserved : 1;
-+ unsigned dmaenable : 1;
-+#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE 0
-+#define DWC_GAHBCFG_INT_DMA_BURST_INCR 1
-+#define DWC_GAHBCFG_INT_DMA_BURST_INCR4 3
-+#define DWC_GAHBCFG_INT_DMA_BURST_INCR8 5
-+#define DWC_GAHBCFG_INT_DMA_BURST_INCR16 7
-+ unsigned hburstlen : 4;
-+ unsigned glblintrmsk : 1;
-+#define DWC_GAHBCFG_GLBINT_ENABLE 1
-+
-+ } b;
-+} gahbcfg_data_t;
-+
-+/**
-+ * This union represents the bit fields of the Core USB Configuration
-+ * Register (GUSBCFG). Set the bits using the bit fields then write
-+ * the <i>d32</i> value to the register.
-+ */
-+typedef union gusbcfg_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned corrupt_tx_packet: 1; /*fscz*/
-+ unsigned force_device_mode: 1;
-+ unsigned force_host_mode: 1;
-+ unsigned reserved23_28 : 6;
-+ unsigned term_sel_dl_pulse : 1;
-+ unsigned ulpi_int_vbus_indicator : 1;
-+ unsigned ulpi_ext_vbus_drv : 1;
-+ unsigned ulpi_clk_sus_m : 1;
-+ unsigned ulpi_auto_res : 1;
-+ unsigned ulpi_fsls : 1;
-+ unsigned otgutmifssel : 1;
-+ unsigned phylpwrclksel : 1;
-+ unsigned nptxfrwnden : 1;
-+ unsigned usbtrdtim : 4;
-+ unsigned hnpcap : 1;
-+ unsigned srpcap : 1;
-+ unsigned ddrsel : 1;
-+ unsigned physel : 1;
-+ unsigned fsintf : 1;
-+ unsigned ulpi_utmi_sel : 1;
-+ unsigned phyif : 1;
-+ unsigned toutcal : 3;
-+ } b;
-+} gusbcfg_data_t;
-+
-+/**
-+ * This union represents the bit fields of the Core Reset Register
-+ * (GRSTCTL). Set/clear the bits using the bit fields then write the
-+ * <i>d32</i> value to the register.
-+ */
-+typedef union grstctl_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ /** AHB Master Idle. Indicates the AHB Master State
-+ * Machine is in IDLE condition. */
-+ unsigned ahbidle : 1;
-+ /** DMA Request Signal. Indicated DMA request is in
-+ * probress. Used for debug purpose. */
-+ unsigned dmareq : 1;
-+ /** Reserved */
-+ unsigned reserved29_11 : 19;
-+ /** TxFIFO Number (TxFNum) (Device and Host).
-+ *
-+ * This is the FIFO number which needs to be flushed,
-+ * using the TxFIFO Flush bit. This field should not
-+ * be changed until the TxFIFO Flush bit is cleared by
-+ * the core.
-+ * - 0x0 : Non Periodic TxFIFO Flush
-+ * - 0x1 : Periodic TxFIFO #1 Flush in device mode
-+ * or Periodic TxFIFO in host mode
-+ * - 0x2 : Periodic TxFIFO #2 Flush in device mode.
-+ * - ...
-+ * - 0xF : Periodic TxFIFO #15 Flush in device mode
-+ * - 0x10: Flush all the Transmit NonPeriodic and
-+ * Transmit Periodic FIFOs in the core
-+ */
-+ unsigned txfnum : 5;
-+ /** TxFIFO Flush (TxFFlsh) (Device and Host).
-+ *
-+ * This bit is used to selectively flush a single or
-+ * all transmit FIFOs. The application must first
-+ * ensure that the core is not in the middle of a
-+ * transaction. <p>The application should write into
-+ * this bit, only after making sure that neither the
-+ * DMA engine is writing into the TxFIFO nor the MAC
-+ * is reading the data out of the FIFO. <p>The
-+ * application should wait until the core clears this
-+ * bit, before performing any operations. This bit
-+ * will takes 8 clocks (slowest of PHY or AHB clock)
-+ * to clear.
-+ */
-+ unsigned txfflsh : 1;
-+ /** RxFIFO Flush (RxFFlsh) (Device and Host)
-+ *
-+ * The application can flush the entire Receive FIFO
-+ * using this bit. <p>The application must first
-+ * ensure that the core is not in the middle of a
-+ * transaction. <p>The application should write into
-+ * this bit, only after making sure that neither the
-+ * DMA engine is reading from the RxFIFO nor the MAC
-+ * is writing the data in to the FIFO. <p>The
-+ * application should wait until the bit is cleared
-+ * before performing any other operations. This bit
-+ * will takes 8 clocks (slowest of PHY or AHB clock)
-+ * to clear.
-+ */
-+ unsigned rxfflsh : 1;
-+ /** In Token Sequence Learning Queue Flush
-+ * (INTknQFlsh) (Device Only)
-+ */
-+ unsigned intknqflsh : 1;
-+ /** Host Frame Counter Reset (Host Only)<br>
-+ *
-+ * The application can reset the (micro)frame number
-+ * counter inside the core, using this bit. When the
-+ * (micro)frame counter is reset, the subsequent SOF
-+ * sent out by the core, will have a (micro)frame
-+ * number of 0.
-+ */
-+ unsigned hstfrm : 1;
-+ /** Hclk Soft Reset
-+ *
-+ * The application uses this bit to reset the control logic in
-+ * the AHB clock domain. Only AHB clock domain pipelines are
-+ * reset.
-+ */
-+ unsigned hsftrst : 1;
-+ /** Core Soft Reset (CSftRst) (Device and Host)
-+ *
-+ * The application can flush the control logic in the
-+ * entire core using this bit. This bit resets the
-+ * pipelines in the AHB Clock domain as well as the
-+ * PHY Clock domain.
-+ *
-+ * The state machines are reset to an IDLE state, the
-+ * control bits in the CSRs are cleared, all the
-+ * transmit FIFOs and the receive FIFO are flushed.
-+ *
-+ * The status mask bits that control the generation of
-+ * the interrupt, are cleared, to clear the
-+ * interrupt. The interrupt status bits are not
-+ * cleared, so the application can get the status of
-+ * any events that occurred in the core after it has
-+ * set this bit.
-+ *
-+ * Any transactions on the AHB are terminated as soon
-+ * as possible following the protocol. Any
-+ * transactions on the USB are terminated immediately.
-+ *
-+ * The configuration settings in the CSRs are
-+ * unchanged, so the software doesn't have to
-+ * reprogram these registers (Device
-+ * Configuration/Host Configuration/Core System
-+ * Configuration/Core PHY Configuration).
-+ *
-+ * The application can write to this bit, any time it
-+ * wants to reset the core. This is a self clearing
-+ * bit and the core clears this bit after all the
-+ * necessary logic is reset in the core, which may
-+ * take several clocks, depending on the current state
-+ * of the core.
-+ */
-+ unsigned csftrst : 1;
-+ } b;
-+} grstctl_t;
-+
-+
-+/**
-+ * This union represents the bit fields of the Core Interrupt Mask
-+ * Register (GINTMSK). Set/clear the bits using the bit fields then
-+ * write the <i>d32</i> value to the register.
-+ */
-+typedef union gintmsk_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct
-+ {
-+ unsigned wkupintr : 1;
-+ unsigned sessreqintr : 1;
-+ unsigned disconnect : 1;
-+ unsigned conidstschng : 1;
-+ unsigned reserved27 : 1;
-+ unsigned ptxfempty : 1;
-+ unsigned hcintr : 1;
-+ unsigned portintr : 1;
-+ unsigned reserved22_23 : 2;
-+ unsigned incomplisoout : 1;
-+ unsigned incomplisoin : 1;
-+ unsigned outepintr : 1;
-+ unsigned inepintr : 1;
-+ unsigned epmismatch : 1;
-+ unsigned reserved16 : 1;
-+ unsigned eopframe : 1;
-+ unsigned isooutdrop : 1;
-+ unsigned enumdone : 1;
-+ unsigned usbreset : 1;
-+ unsigned usbsuspend : 1;
-+ unsigned erlysuspend : 1;
-+ unsigned i2cintr : 1;
-+ unsigned reserved8 : 1;
-+ unsigned goutnakeff : 1;
-+ unsigned ginnakeff : 1;
-+ unsigned nptxfempty : 1;
-+ unsigned rxstsqlvl : 1;
-+ unsigned sofintr : 1;
-+ unsigned otgintr : 1;
-+ unsigned modemismatch : 1;
-+ unsigned reserved0 : 1;
-+ } b;
-+} gintmsk_data_t;
-+/**
-+ * This union represents the bit fields of the Core Interrupt Register
-+ * (GINTSTS). Set/clear the bits using the bit fields then write the
-+ * <i>d32</i> value to the register.
-+ */
-+typedef union gintsts_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+#define DWC_SOF_INTR_MASK 0x0008
-+ /** register bits */
-+ struct
-+ {
-+#define DWC_HOST_MODE 1
-+ unsigned wkupintr : 1;
-+ unsigned sessreqintr : 1;
-+ unsigned disconnect : 1;
-+ unsigned conidstschng : 1;
-+ unsigned reserved27 : 1;
-+ unsigned ptxfempty : 1;
-+ unsigned hcintr : 1;
-+ unsigned portintr : 1;
-+ unsigned reserved22_23 : 2;
-+ unsigned incomplisoout : 1;
-+ unsigned incomplisoin : 1;
-+ unsigned outepintr : 1;
-+ unsigned inepint: 1;
-+ unsigned epmismatch : 1;
-+ unsigned intokenrx : 1;
-+ unsigned eopframe : 1;
-+ unsigned isooutdrop : 1;
-+ unsigned enumdone : 1;
-+ unsigned usbreset : 1;
-+ unsigned usbsuspend : 1;
-+ unsigned erlysuspend : 1;
-+ unsigned i2cintr : 1;
-+ unsigned reserved8 : 1;
-+ unsigned goutnakeff : 1;
-+ unsigned ginnakeff : 1;
-+ unsigned nptxfempty : 1;
-+ unsigned rxstsqlvl : 1;
-+ unsigned sofintr : 1;
-+ unsigned otgintr : 1;
-+ unsigned modemismatch : 1;
-+ unsigned curmode : 1;
-+ } b;
-+} gintsts_data_t;
-+
-+
-+/**
-+ * This union represents the bit fields in the Device Receive Status Read and
-+ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
-+ * element then read out the bits using the <i>b</i>it elements.
-+ */
-+typedef union device_grxsts_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned reserved : 7;
-+ unsigned fn : 4;
-+#define DWC_STS_DATA_UPDT 0x2 // OUT Data Packet
-+#define DWC_STS_XFER_COMP 0x3 // OUT Data Transfer Complete
-+
-+#define DWC_DSTS_GOUT_NAK 0x1 // Global OUT NAK
-+#define DWC_DSTS_SETUP_COMP 0x4 // Setup Phase Complete
-+#define DWC_DSTS_SETUP_UPDT 0x6 // SETUP Packet
-+ unsigned pktsts : 4;
-+ unsigned dpid : 2;
-+ unsigned bcnt : 11;
-+ unsigned epnum : 4;
-+ } b;
-+} device_grxsts_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Receive Status Read and
-+ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
-+ * element then read out the bits using the <i>b</i>it elements.
-+ */
-+typedef union host_grxsts_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned reserved31_21 : 11;
-+#define DWC_GRXSTS_PKTSTS_IN 0x2
-+#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP 0x3
-+#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5
-+#define DWC_GRXSTS_PKTSTS_CH_HALTED 0x7
-+ unsigned pktsts : 4;
-+ unsigned dpid : 2;
-+ unsigned bcnt : 11;
-+ unsigned chnum : 4;
-+ } b;
-+} host_grxsts_data_t;
-+
-+/**
-+ * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ,
-+ * GNPTXFSIZ, DPTXFSIZn). Read the register into the <i>d32</i> element then
-+ * read out the bits using the <i>b</i>it elements.
-+ */
-+typedef union fifosize_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned depth : 16;
-+ unsigned startaddr : 16;
-+ } b;
-+} fifosize_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Non-Periodic Transmit
-+ * FIFO/Queue Status Register (GNPTXSTS). Read the register into the
-+ * <i>d32</i> element then read out the bits using the <i>b</i>it
-+ * elements.
-+ */
-+typedef union gnptxsts_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned reserved : 1;
-+ /** Top of the Non-Periodic Transmit Request Queue
-+ * - bits 30:27 - Channel/EP Number
-+ * - bits 26:25 - Token Type
-+ * - bit 24 - Terminate (Last entry for the selected
-+ * channel/EP)
-+ * - 2'b00 - IN/OUT
-+ * - 2'b01 - Zero Length OUT
-+ * - 2'b10 - PING/Complete Split
-+ * - 2'b11 - Channel Halt
-+
-+ */
-+ unsigned nptxqtop_chnep : 4;
-+ unsigned nptxqtop_token : 2;
-+ unsigned nptxqtop_terminate : 1;
-+ unsigned nptxqspcavail : 8;
-+ unsigned nptxfspcavail : 16;
-+ } b;
-+} gnptxsts_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Transmit
-+ * FIFO Status Register (DTXFSTS). Read the register into the
-+ * <i>d32</i> element then read out the bits using the <i>b</i>it
-+ * elements.
-+ */
-+typedef union dtxfsts_data /* fscz */ //*
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned reserved : 16;
-+ unsigned txfspcavail : 16;
-+ } b;
-+} dtxfsts_data_t;
-+
-+/**
-+ * This union represents the bit fields in the I2C Control Register
-+ * (I2CCTL). Read the register into the <i>d32</i> element then read out the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union gi2cctl_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned bsydne : 1;
-+ unsigned rw : 1;
-+ unsigned reserved : 2;
-+ unsigned i2cdevaddr : 2;
-+ unsigned i2csuspctl : 1;
-+ unsigned ack : 1;
-+ unsigned i2cen : 1;
-+ unsigned addr : 7;
-+ unsigned regaddr : 8;
-+ unsigned rwdata : 8;
-+ } b;
-+} gi2cctl_data_t;
-+
-+/**
-+ * This union represents the bit fields in the User HW Config1
-+ * Register. Read the register into the <i>d32</i> element then read
-+ * out the bits using the <i>b</i>it elements.
-+ */
-+typedef union hwcfg1_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned ep_dir15 : 2;
-+ unsigned ep_dir14 : 2;
-+ unsigned ep_dir13 : 2;
-+ unsigned ep_dir12 : 2;
-+ unsigned ep_dir11 : 2;
-+ unsigned ep_dir10 : 2;
-+ unsigned ep_dir9 : 2;
-+ unsigned ep_dir8 : 2;
-+ unsigned ep_dir7 : 2;
-+ unsigned ep_dir6 : 2;
-+ unsigned ep_dir5 : 2;
-+ unsigned ep_dir4 : 2;
-+ unsigned ep_dir3 : 2;
-+ unsigned ep_dir2 : 2;
-+ unsigned ep_dir1 : 2;
-+ unsigned ep_dir0 : 2;
-+ } b;
-+} hwcfg1_data_t;
-+
-+/**
-+ * This union represents the bit fields in the User HW Config2
-+ * Register. Read the register into the <i>d32</i> element then read
-+ * out the bits using the <i>b</i>it elements.
-+ */
-+typedef union hwcfg2_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /* GHWCFG2 */
-+ unsigned reserved31 : 1;
-+ unsigned dev_token_q_depth : 5;
-+ unsigned host_perio_tx_q_depth : 2;
-+ unsigned nonperio_tx_q_depth : 2;
-+ unsigned rx_status_q_depth : 2;
-+ unsigned dynamic_fifo : 1;
-+ unsigned perio_ep_supported : 1;
-+ unsigned num_host_chan : 4;
-+ unsigned num_dev_ep : 4;
-+ unsigned fs_phy_type : 2;
-+#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0
-+#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1
-+#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2
-+#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3
-+ unsigned hs_phy_type : 2;
-+ unsigned point2point : 1;
-+ unsigned architecture : 2;
-+#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0
-+#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1
-+#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2
-+#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3
-+#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4
-+#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5
-+#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6
-+ unsigned op_mode : 3;
-+ } b;
-+} hwcfg2_data_t;
-+
-+/**
-+ * This union represents the bit fields in the User HW Config3
-+ * Register. Read the register into the <i>d32</i> element then read
-+ * out the bits using the <i>b</i>it elements.
-+ */
-+typedef union hwcfg3_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /* GHWCFG3 */
-+ unsigned dfifo_depth : 16;
-+ unsigned reserved15_13 : 3;
-+ unsigned ahb_phy_clock_synch : 1;
-+ unsigned synch_reset_type : 1;
-+ unsigned optional_features : 1;
-+ unsigned vendor_ctrl_if : 1;
-+ unsigned i2c : 1;
-+ unsigned otg_func : 1;
-+ unsigned packet_size_cntr_width : 3;
-+ unsigned xfer_size_cntr_width : 4;
-+ } b;
-+} hwcfg3_data_t;
-+
-+/**
-+ * This union represents the bit fields in the User HW Config4
-+ * Register. Read the register into the <i>d32</i> element then read
-+ * out the bits using the <i>b</i>it elements.
-+ */
-+typedef union hwcfg4_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+unsigned reserved31_30 : 2; /* fscz */
-+ unsigned num_in_eps : 4;
-+ unsigned ded_fifo_en : 1;
-+
-+ unsigned session_end_filt_en : 1;
-+ unsigned b_valid_filt_en : 1;
-+ unsigned a_valid_filt_en : 1;
-+ unsigned vbus_valid_filt_en : 1;
-+ unsigned iddig_filt_en : 1;
-+ unsigned num_dev_mode_ctrl_ep : 4;
-+ unsigned utmi_phy_data_width : 2;
-+ unsigned min_ahb_freq : 9;
-+ unsigned power_optimiz : 1;
-+ unsigned num_dev_perio_in_ep : 4;
-+ } b;
-+} hwcfg4_data_t;
-+
-+////////////////////////////////////////////
-+// Device Registers
-+/**
-+ * Device Global Registers. <i>Offsets 800h-BFFh</i>
-+ *
-+ * The following structures define the size and relative field offsets
-+ * for the Device Mode Registers.
-+ *
-+ * <i>These registers are visible only in Device mode and must not be
-+ * accessed in Host mode, as the results are unknown.</i>
-+ */
-+typedef struct dwc_otg_dev_global_regs
-+{
-+ /** Device Configuration Register. <i>Offset 800h</i> */
-+ volatile uint32_t dcfg;
-+ /** Device Control Register. <i>Offset: 804h</i> */
-+ volatile uint32_t dctl;
-+ /** Device Status Register (Read Only). <i>Offset: 808h</i> */
-+ volatile uint32_t dsts;
-+ /** Reserved. <i>Offset: 80Ch</i> */
-+ uint32_t unused;
-+ /** Device IN Endpoint Common Interrupt Mask
-+ * Register. <i>Offset: 810h</i> */
-+ volatile uint32_t diepmsk;
-+ /** Device OUT Endpoint Common Interrupt Mask
-+ * Register. <i>Offset: 814h</i> */
-+ volatile uint32_t doepmsk;
-+ /** Device All Endpoints Interrupt Register. <i>Offset: 818h</i> */
-+ volatile uint32_t daint;
-+ /** Device All Endpoints Interrupt Mask Register. <i>Offset:
-+ * 81Ch</i> */
-+ volatile uint32_t daintmsk;
-+ /** Device IN Token Queue Read Register-1 (Read Only).
-+ * <i>Offset: 820h</i> */
-+ volatile uint32_t dtknqr1;
-+ /** Device IN Token Queue Read Register-2 (Read Only).
-+ * <i>Offset: 824h</i> */
-+ volatile uint32_t dtknqr2;
-+ /** Device VBUS discharge Register. <i>Offset: 828h</i> */
-+ volatile uint32_t dvbusdis;
-+ /** Device VBUS Pulse Register. <i>Offset: 82Ch</i> */
-+ volatile uint32_t dvbuspulse;
-+ /** Device IN Token Queue Read Register-3 (Read Only).
-+ * Device Thresholding control register (Read/Write)
-+ * <i>Offset: 830h</i> */
-+ volatile uint32_t dtknqr3_dthrctl;
-+ /** Device IN Token Queue Read Register-4 (Read Only). /
-+ * Device IN EPs empty Inr. Mask Register (Read/Write)
-+ * <i>Offset: 834h</i> */
-+ volatile uint32_t dtknqr4_fifoemptymsk;
-+} dwc_otg_device_global_regs_t;
-+
-+/**
-+ * This union represents the bit fields in the Device Configuration
-+ * Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements. Write the
-+ * <i>d32</i> member to the dcfg register.
-+ */
-+typedef union dcfg_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned reserved31_23 : 9;
-+ /** In Endpoint Mis-match count */
-+ unsigned epmscnt : 5;
-+ unsigned reserved13_17 : 5;
-+ /** Periodic Frame Interval */
-+#define DWC_DCFG_FRAME_INTERVAL_80 0
-+#define DWC_DCFG_FRAME_INTERVAL_85 1
-+#define DWC_DCFG_FRAME_INTERVAL_90 2
-+#define DWC_DCFG_FRAME_INTERVAL_95 3
-+ unsigned perfrint : 2;
-+ /** Device Addresses */
-+ unsigned devaddr : 7;
-+ unsigned reserved3 : 1;
-+ /** Non Zero Length Status OUT Handshake */
-+#define DWC_DCFG_SEND_STALL 1
-+ unsigned nzstsouthshk : 1;
-+ /** Device Speed */
-+ unsigned devspd : 2;
-+ } b;
-+} dcfg_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device Control
-+ * Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements.
-+ */
-+typedef union dctl_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned reserved : 20;
-+ /** Power-On Programming Done */
-+ unsigned pwronprgdone : 1;
-+ /** Clear Global OUT NAK */
-+ unsigned cgoutnak : 1;
-+ /** Set Global OUT NAK */
-+ unsigned sgoutnak : 1;
-+ /** Clear Global Non-Periodic IN NAK */
-+ unsigned cgnpinnak : 1;
-+ /** Set Global Non-Periodic IN NAK */
-+ unsigned sgnpinnak : 1;
-+ /** Test Control */
-+ unsigned tstctl : 3;
-+ /** Global OUT NAK Status */
-+ unsigned goutnaksts : 1;
-+ /** Global Non-Periodic IN NAK Status */
-+ unsigned gnpinnaksts : 1;
-+ /** Soft Disconnect */
-+ unsigned sftdiscon : 1;
-+ /** Remote Wakeup */
-+ unsigned rmtwkupsig : 1;
-+ } b;
-+} dctl_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device Status
-+ * Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements.
-+ */
-+typedef union dsts_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned reserved22_31 : 10;
-+ /** Frame or Microframe Number of the received SOF */
-+ unsigned soffn : 14;
-+ unsigned reserved4_7: 4;
-+ /** Erratic Error */
-+ unsigned errticerr : 1;
-+ /** Enumerated Speed */
-+#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0
-+#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1
-+#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ 2
-+#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ 3
-+ unsigned enumspd : 2;
-+ /** Suspend Status */
-+ unsigned suspsts : 1;
-+ } b;
-+} dsts_data_t;
-+
-+
-+/**
-+ * This union represents the bit fields in the Device IN EP Interrupt
-+ * Register and the Device IN EP Common Mask Register.
-+ *
-+ * - Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union diepint_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned reserved07_31 : 23;
-+ unsigned txfifoundrn : 1;
-+ /** IN Endpoint HAK Effective mask */
-+ unsigned emptyintr : 1;
-+ /** IN Endpoint NAK Effective mask */
-+ unsigned inepnakeff : 1;
-+ /** IN Token Received with EP mismatch mask */
-+ unsigned intknepmis : 1;
-+ /** IN Token received with TxF Empty mask */
-+ unsigned intktxfemp : 1;
-+ /** TimeOUT Handshake mask (non-ISOC EPs) */
-+ unsigned timeout : 1;
-+ /** AHB Error mask */
-+ unsigned ahberr : 1;
-+ /** Endpoint disable mask */
-+ unsigned epdisabled : 1;
-+ /** Transfer complete mask */
-+ unsigned xfercompl : 1;
-+ } b;
-+} diepint_data_t;
-+/**
-+ * This union represents the bit fields in the Device IN EP Common
-+ * Interrupt Mask Register.
-+ */
-+typedef union diepint_data diepmsk_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device OUT EP Interrupt
-+ * Registerand Device OUT EP Common Interrupt Mask Register.
-+ *
-+ * - Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union doepint_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned reserved04_31 : 27;
-+ /** OUT Token Received when Endpoint Disabled */
-+ unsigned outtknepdis : 1;
-+ /** Setup Phase Done (contorl EPs) */
-+ unsigned setup : 1;
-+ /** AHB Error */
-+ unsigned ahberr : 1;
-+ /** Endpoint disable */
-+ unsigned epdisabled : 1;
-+ /** Transfer complete */
-+ unsigned xfercompl : 1;
-+ } b;
-+} doepint_data_t;
-+/**
-+ * This union represents the bit fields in the Device OUT EP Common
-+ * Interrupt Mask Register.
-+ */
-+typedef union doepint_data doepmsk_data_t;
-+
-+
-+/**
-+ * This union represents the bit fields in the Device All EP Interrupt
-+ * and Mask Registers.
-+ * - Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union daint_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** OUT Endpoint bits */
-+ unsigned out : 16;
-+ /** IN Endpoint bits */
-+ unsigned in : 16;
-+ } ep;
-+ struct {
-+ /** OUT Endpoint bits */
-+ unsigned outep15 : 1;
-+ unsigned outep14 : 1;
-+ unsigned outep13 : 1;
-+ unsigned outep12 : 1;
-+ unsigned outep11 : 1;
-+ unsigned outep10 : 1;
-+ unsigned outep9 : 1;
-+ unsigned outep8 : 1;
-+ unsigned outep7 : 1;
-+ unsigned outep6 : 1;
-+ unsigned outep5 : 1;
-+ unsigned outep4 : 1;
-+ unsigned outep3 : 1;
-+ unsigned outep2 : 1;
-+ unsigned outep1 : 1;
-+ unsigned outep0 : 1;
-+ /** IN Endpoint bits */
-+ unsigned inep15 : 1;
-+ unsigned inep14 : 1;
-+ unsigned inep13 : 1;
-+ unsigned inep12 : 1;
-+ unsigned inep11 : 1;
-+ unsigned inep10 : 1;
-+ unsigned inep9 : 1;
-+ unsigned inep8 : 1;
-+ unsigned inep7 : 1;
-+ unsigned inep6 : 1;
-+ unsigned inep5 : 1;
-+ unsigned inep4 : 1;
-+ unsigned inep3 : 1;
-+ unsigned inep2 : 1;
-+ unsigned inep1 : 1;
-+ unsigned inep0 : 1;
-+ } b;
-+} daint_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device IN Token Queue
-+ * Read Registers.
-+ * - Read the register into the <i>d32</i> member.
-+ * - READ-ONLY Register
-+ */
-+typedef union dtknq1_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** EP Numbers of IN Tokens 0 ... 4 */
-+ unsigned epnums0_5 : 24;
-+ /** write pointer has wrapped. */
-+ unsigned wrap_bit : 1;
-+ /** Reserved */
-+ unsigned reserved05_06 : 2;
-+ /** In Token Queue Write Pointer */
-+ unsigned intknwptr : 5;
-+ }b;
-+} dtknq1_data_t;
-+
-+/**
-+ * This union represents Threshold control Register
-+ * - Read and write the register into the <i>d32</i> member.
-+ * - READ-WRITABLE Register
-+ */
-+typedef union dthrctl_data //* /*fscz */
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** Reserved */
-+ unsigned reserved26_31 : 6;
-+ /** Rx Thr. Length */
-+ unsigned rx_thr_len : 9;
-+ /** Rx Thr. Enable */
-+ unsigned rx_thr_en : 1;
-+ /** Reserved */
-+ unsigned reserved11_15 : 5;
-+ /** Tx Thr. Length */
-+ unsigned tx_thr_len : 9;
-+ /** ISO Tx Thr. Enable */
-+ unsigned iso_thr_en : 1;
-+ /** non ISO Tx Thr. Enable */
-+ unsigned non_iso_thr_en : 1;
-+
-+ }b;
-+} dthrctl_data_t;
-+
-+/**
-+ * Device Logical IN Endpoint-Specific Registers. <i>Offsets
-+ * 900h-AFCh</i>
-+ *
-+ * There will be one set of endpoint registers per logical endpoint
-+ * implemented.
-+ *
-+ * <i>These registers are visible only in Device mode and must not be
-+ * accessed in Host mode, as the results are unknown.</i>
-+ */
-+typedef struct dwc_otg_dev_in_ep_regs
-+{
-+ /** Device IN Endpoint Control Register. <i>Offset:900h +
-+ * (ep_num * 20h) + 00h</i> */
-+ volatile uint32_t diepctl;
-+ /** Reserved. <i>Offset:900h + (ep_num * 20h) + 04h</i> */
-+ uint32_t reserved04;
-+ /** Device IN Endpoint Interrupt Register. <i>Offset:900h +
-+ * (ep_num * 20h) + 08h</i> */
-+ volatile uint32_t diepint;
-+ /** Reserved. <i>Offset:900h + (ep_num * 20h) + 0Ch</i> */
-+ uint32_t reserved0C;
-+ /** Device IN Endpoint Transfer Size
-+ * Register. <i>Offset:900h + (ep_num * 20h) + 10h</i> */
-+ volatile uint32_t dieptsiz;
-+ /** Device IN Endpoint DMA Address Register. <i>Offset:900h +
-+ * (ep_num * 20h) + 14h</i> */
-+ volatile uint32_t diepdma;
-+ /** Reserved. <i>Offset:900h + (ep_num * 20h) + 18h - 900h +
-+ * (ep_num * 20h) + 1Ch</i>*/
-+ volatile uint32_t dtxfsts;
-+ /** Reserved. <i>Offset:900h + (ep_num * 20h) + 1Ch - 900h +
-+ * (ep_num * 20h) + 1Ch</i>*/
-+ uint32_t reserved18;
-+} dwc_otg_dev_in_ep_regs_t;
-+
-+/**
-+ * Device Logical OUT Endpoint-Specific Registers. <i>Offsets:
-+ * B00h-CFCh</i>
-+ *
-+ * There will be one set of endpoint registers per logical endpoint
-+ * implemented.
-+ *
-+ * <i>These registers are visible only in Device mode and must not be
-+ * accessed in Host mode, as the results are unknown.</i>
-+ */
-+typedef struct dwc_otg_dev_out_ep_regs
-+{
-+ /** Device OUT Endpoint Control Register. <i>Offset:B00h +
-+ * (ep_num * 20h) + 00h</i> */
-+ volatile uint32_t doepctl;
-+ /** Device OUT Endpoint Frame number Register. <i>Offset:
-+ * B00h + (ep_num * 20h) + 04h</i> */
-+ volatile uint32_t doepfn;
-+ /** Device OUT Endpoint Interrupt Register. <i>Offset:B00h +
-+ * (ep_num * 20h) + 08h</i> */
-+ volatile uint32_t doepint;
-+ /** Reserved. <i>Offset:B00h + (ep_num * 20h) + 0Ch</i> */
-+ uint32_t reserved0C;
-+ /** Device OUT Endpoint Transfer Size Register. <i>Offset:
-+ * B00h + (ep_num * 20h) + 10h</i> */
-+ volatile uint32_t doeptsiz;
-+ /** Device OUT Endpoint DMA Address Register. <i>Offset:B00h
-+ * + (ep_num * 20h) + 14h</i> */
-+ volatile uint32_t doepdma;
-+ /** Reserved. <i>Offset:B00h + (ep_num * 20h) + 18h - B00h +
-+ * (ep_num * 20h) + 1Ch</i> */
-+ uint32_t unused[2];
-+} dwc_otg_dev_out_ep_regs_t;
-+
-+/**
-+ * This union represents the bit fields in the Device EP Control
-+ * Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements.
-+ */
-+typedef union depctl_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** Endpoint Enable */
-+ unsigned epena : 1;
-+ /** Endpoint Disable */
-+ unsigned epdis : 1;
-+ /** Set DATA1 PID (INTR/Bulk IN and OUT endpoints)
-+ * Writing to this field sets the Endpoint DPID (DPID)
-+ * field in this register to DATA1 Set Odd
-+ * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints)
-+ * Writing to this field sets the Even/Odd
-+ * (micro)frame (EO_FrNum) field to odd (micro) frame.
-+ */
-+ unsigned setd1pid : 1;
-+ /** Set DATA0 PID (INTR/Bulk IN and OUT endpoints)
-+ * Writing to this field sets the Endpoint DPID (DPID)
-+ * field in this register to DATA0. Set Even
-+ * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints)
-+ * Writing to this field sets the Even/Odd
-+ * (micro)frame (EO_FrNum) field to even (micro)
-+ * frame.
-+ */
-+ unsigned setd0pid : 1;
-+ /** Set NAK */
-+ unsigned snak : 1;
-+ /** Clear NAK */
-+ unsigned cnak : 1;
-+ /** Tx Fifo Number
-+ * IN EPn/IN EP0
-+ * OUT EPn/OUT EP0 - reserved */
-+ unsigned txfnum : 4;
-+ /** Stall Handshake */
-+ unsigned stall : 1;
-+ /** Snoop Mode
-+ * OUT EPn/OUT EP0
-+ * IN EPn/IN EP0 - reserved */
-+ unsigned snp : 1;
-+ /** Endpoint Type
-+ * 2'b00: Control
-+ * 2'b01: Isochronous
-+ * 2'b10: Bulk
-+ * 2'b11: Interrupt */
-+ unsigned eptype : 2;
-+ /** NAK Status */
-+ unsigned naksts : 1;
-+ /** Endpoint DPID (INTR/Bulk IN and OUT endpoints)
-+ * This field contains the PID of the packet going to
-+ * be received or transmitted on this endpoint. The
-+ * application should program the PID of the first
-+ * packet going to be received or transmitted on this
-+ * endpoint , after the endpoint is
-+ * activated. Application use the SetD1PID and
-+ * SetD0PID fields of this register to program either
-+ * D0 or D1 PID.
-+ *
-+ * The encoding for this field is
-+ * - 0: D0
-+ * - 1: D1
-+ */
-+ unsigned dpid : 1;
-+ /** USB Active Endpoint */
-+ unsigned usbactep : 1;
-+ /** Next Endpoint
-+ * IN EPn/IN EP0
-+ * OUT EPn/OUT EP0 - reserved */
-+ unsigned nextep : 4;
-+ /** Maximum Packet Size
-+ * IN/OUT EPn
-+ * IN/OUT EP0 - 2 bits
-+ * 2'b00: 64 Bytes
-+ * 2'b01: 32
-+ * 2'b10: 16
-+ * 2'b11: 8 */
-+#define DWC_DEP0CTL_MPS_64 0
-+#define DWC_DEP0CTL_MPS_32 1
-+#define DWC_DEP0CTL_MPS_16 2
-+#define DWC_DEP0CTL_MPS_8 3
-+ unsigned mps : 11;
-+ } b;
-+} depctl_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device EP Transfer
-+ * Size Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements.
-+ */
-+typedef union deptsiz_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned reserved : 1;
-+ /** Multi Count - Periodic IN endpoints */
-+ unsigned mc : 2;
-+ /** Packet Count */
-+ unsigned pktcnt : 10;
-+ /** Transfer size */
-+ unsigned xfersize : 19;
-+ } b;
-+} deptsiz_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device EP 0 Transfer
-+ * Size Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements.
-+ */
-+typedef union deptsiz0_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned reserved31 : 1;
-+ /**Setup Packet Count (DOEPTSIZ0 Only) */
-+ unsigned supcnt : 2;
-+ /** Reserved */
-+ unsigned reserved28_20 : 9;
-+ /** Packet Count */
-+ unsigned pktcnt : 1;
-+ /** Reserved */
-+ unsigned reserved18_7 : 12;
-+ /** Transfer size */
-+ unsigned xfersize : 7;
-+ } b;
-+} deptsiz0_data_t;
-+
-+
-+/** Maximum number of Periodic FIFOs */
-+#define MAX_PERIO_FIFOS 15
-+/** Maximum number of TX FIFOs */
-+#define MAX_TX_FIFOS 15
-+/** Maximum number of Endpoints/HostChannels */
-+#define MAX_EPS_CHANNELS 16
-+//#define MAX_EPS_CHANNELS 4
-+
-+/**
-+ * The dwc_otg_dev_if structure contains information needed to manage
-+ * the DWC_otg controller acting in device mode. It represents the
-+ * programming view of the device-specific aspects of the controller.
-+ */
-+typedef struct dwc_otg_dev_if {
-+ /** Pointer to device Global registers.
-+ * Device Global Registers starting at offset 800h
-+ */
-+ dwc_otg_device_global_regs_t *dev_global_regs;
-+#define DWC_DEV_GLOBAL_REG_OFFSET 0x800
-+
-+ /**
-+ * Device Logical IN Endpoint-Specific Registers 900h-AFCh
-+ */
-+ dwc_otg_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS];
-+#define DWC_DEV_IN_EP_REG_OFFSET 0x900
-+#define DWC_EP_REG_OFFSET 0x20
-+
-+ /** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */
-+ dwc_otg_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS];
-+#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00
-+
-+ /* Device configuration information*/
-+ uint8_t speed; /**< Device Speed 0: Unknown, 1: LS, 2:FS, 3: HS */
-+ //uint8_t num_eps; /**< Number of EPs range: 0-16 (includes EP0) */
-+ //uint8_t num_perio_eps; /**< # of Periodic EP range: 0-15 */
-+ /*fscz */
-+ uint8_t num_in_eps; /**< Number # of Tx EP range: 0-15 exept ep0 */
-+ uint8_t num_out_eps; /**< Number # of Rx EP range: 0-15 exept ep 0*/
-+
-+ /** Size of periodic FIFOs (Bytes) */
-+ uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS];
-+
-+ /** Size of Tx FIFOs (Bytes) */
-+ uint16_t tx_fifo_size[MAX_TX_FIFOS];
-+
-+ /** Thresholding enable flags and length varaiables **/
-+ uint16_t rx_thr_en;
-+ uint16_t iso_tx_thr_en;
-+ uint16_t non_iso_tx_thr_en;
-+
-+ uint16_t rx_thr_length;
-+ uint16_t tx_thr_length;
-+} dwc_otg_dev_if_t;
-+
-+/**
-+ * This union represents the bit fields in the Power and Clock Gating Control
-+ * Register. Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union pcgcctl_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct {
-+ unsigned reserved31_05 : 27;
-+ /** PHY Suspended */
-+ unsigned physuspended : 1;
-+ /** Reset Power Down Modules */
-+ unsigned rstpdwnmodule : 1;
-+ /** Power Clamp */
-+ unsigned pwrclmp : 1;
-+ /** Gate Hclk */
-+ unsigned gatehclk : 1;
-+ /** Stop Pclk */
-+ unsigned stoppclk : 1;
-+ } b;
-+} pcgcctl_data_t;
-+
-+/////////////////////////////////////////////////
-+// Host Mode Register Structures
-+//
-+/**
-+ * The Host Global Registers structure defines the size and relative
-+ * field offsets for the Host Mode Global Registers. Host Global
-+ * Registers offsets 400h-7FFh.
-+*/
-+typedef struct dwc_otg_host_global_regs
-+{
-+ /** Host Configuration Register. <i>Offset: 400h</i> */
-+ volatile uint32_t hcfg;
-+ /** Host Frame Interval Register. <i>Offset: 404h</i> */
-+ volatile uint32_t hfir;
-+ /** Host Frame Number / Frame Remaining Register. <i>Offset: 408h</i> */
-+ volatile uint32_t hfnum;
-+ /** Reserved. <i>Offset: 40Ch</i> */
-+ uint32_t reserved40C;
-+ /** Host Periodic Transmit FIFO/ Queue Status Register. <i>Offset: 410h</i> */
-+ volatile uint32_t hptxsts;
-+ /** Host All Channels Interrupt Register. <i>Offset: 414h</i> */
-+ volatile uint32_t haint;
-+ /** Host All Channels Interrupt Mask Register. <i>Offset: 418h</i> */
-+ volatile uint32_t haintmsk;
-+} dwc_otg_host_global_regs_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Configuration Register.
-+ * Read the register into the <i>d32</i> member then set/clear the bits using
-+ * the <i>b</i>it elements. Write the <i>d32</i> member to the hcfg register.
-+ */
-+typedef union hcfg_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct {
-+ /** Reserved */
-+ //unsigned reserved31_03 : 29;
-+ /** FS/LS Only Support */
-+ unsigned fslssupp : 1;
-+ /** FS/LS Phy Clock Select */
-+#define DWC_HCFG_30_60_MHZ 0
-+#define DWC_HCFG_48_MHZ 1
-+#define DWC_HCFG_6_MHZ 2
-+ unsigned fslspclksel : 2;
-+ } b;
-+} hcfg_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Frame Remaing/Number
-+ * Register.
-+ */
-+typedef union hfir_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct {
-+ unsigned reserved : 16;
-+ unsigned frint : 16;
-+ } b;
-+} hfir_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Frame Remaing/Number
-+ * Register.
-+ */
-+typedef union hfnum_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct {
-+ unsigned frrem : 16;
-+#define DWC_HFNUM_MAX_FRNUM 0x3FFF
-+ unsigned frnum : 16;
-+ } b;
-+} hfnum_data_t;
-+
-+typedef union hptxsts_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct {
-+ /** Top of the Periodic Transmit Request Queue
-+ * - bit 24 - Terminate (last entry for the selected channel)
-+ * - bits 26:25 - Token Type
-+ * - 2'b00 - Zero length
-+ * - 2'b01 - Ping
-+ * - 2'b10 - Disable
-+ * - bits 30:27 - Channel Number
-+ * - bit 31 - Odd/even microframe
-+ */
-+ unsigned ptxqtop_odd : 1;
-+ unsigned ptxqtop_chnum : 4;
-+ unsigned ptxqtop_token : 2;
-+ unsigned ptxqtop_terminate : 1;
-+ unsigned ptxqspcavail : 8;
-+ unsigned ptxfspcavail : 16;
-+ } b;
-+} hptxsts_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Port Control and Status
-+ * Register. Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
-+ * hprt0 register.
-+ */
-+typedef union hprt0_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned reserved19_31 : 13;
-+#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0
-+#define DWC_HPRT0_PRTSPD_FULL_SPEED 1
-+#define DWC_HPRT0_PRTSPD_LOW_SPEED 2
-+ unsigned prtspd : 2;
-+ unsigned prttstctl : 4;
-+ unsigned prtpwr : 1;
-+ unsigned prtlnsts : 2;
-+ unsigned reserved9 : 1;
-+ unsigned prtrst : 1;
-+ unsigned prtsusp : 1;
-+ unsigned prtres : 1;
-+ unsigned prtovrcurrchng : 1;
-+ unsigned prtovrcurract : 1;
-+ unsigned prtenchng : 1;
-+ unsigned prtena : 1;
-+ unsigned prtconndet : 1;
-+ unsigned prtconnsts : 1;
-+ } b;
-+} hprt0_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host All Interrupt
-+ * Register.
-+ */
-+typedef union haint_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned reserved : 16;
-+ unsigned ch15 : 1;
-+ unsigned ch14 : 1;
-+ unsigned ch13 : 1;
-+ unsigned ch12 : 1;
-+ unsigned ch11 : 1;
-+ unsigned ch10 : 1;
-+ unsigned ch9 : 1;
-+ unsigned ch8 : 1;
-+ unsigned ch7 : 1;
-+ unsigned ch6 : 1;
-+ unsigned ch5 : 1;
-+ unsigned ch4 : 1;
-+ unsigned ch3 : 1;
-+ unsigned ch2 : 1;
-+ unsigned ch1 : 1;
-+ unsigned ch0 : 1;
-+ } b;
-+ struct {
-+ unsigned reserved : 16;
-+ unsigned chint : 16;
-+ } b2;
-+} haint_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host All Interrupt
-+ * Register.
-+ */
-+typedef union haintmsk_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned reserved : 16;
-+ unsigned ch15 : 1;
-+ unsigned ch14 : 1;
-+ unsigned ch13 : 1;
-+ unsigned ch12 : 1;
-+ unsigned ch11 : 1;
-+ unsigned ch10 : 1;
-+ unsigned ch9 : 1;
-+ unsigned ch8 : 1;
-+ unsigned ch7 : 1;
-+ unsigned ch6 : 1;
-+ unsigned ch5 : 1;
-+ unsigned ch4 : 1;
-+ unsigned ch3 : 1;
-+ unsigned ch2 : 1;
-+ unsigned ch1 : 1;
-+ unsigned ch0 : 1;
-+ } b;
-+ struct {
-+ unsigned reserved : 16;
-+ unsigned chint : 16;
-+ } b2;
-+} haintmsk_data_t;
-+
-+/**
-+ * Host Channel Specific Registers. <i>500h-5FCh</i>
-+ */
-+typedef struct dwc_otg_hc_regs
-+{
-+ /** Host Channel 0 Characteristic Register. <i>Offset: 500h + (chan_num * 20h) + 00h</i> */
-+ volatile uint32_t hcchar;
-+ /** Host Channel 0 Split Control Register. <i>Offset: 500h + (chan_num * 20h) + 04h</i> */
-+ volatile uint32_t hcsplt;
-+ /** Host Channel 0 Interrupt Register. <i>Offset: 500h + (chan_num * 20h) + 08h</i> */
-+ volatile uint32_t hcint;
-+ /** Host Channel 0 Interrupt Mask Register. <i>Offset: 500h + (chan_num * 20h) + 0Ch</i> */
-+ volatile uint32_t hcintmsk;
-+ /** Host Channel 0 Transfer Size Register. <i>Offset: 500h + (chan_num * 20h) + 10h</i> */
-+ volatile uint32_t hctsiz;
-+ /** Host Channel 0 DMA Address Register. <i>Offset: 500h + (chan_num * 20h) + 14h</i> */
-+ volatile uint32_t hcdma;
-+ /** Reserved. <i>Offset: 500h + (chan_num * 20h) + 18h - 500h + (chan_num * 20h) + 1Ch</i> */
-+ uint32_t reserved[2];
-+} dwc_otg_hc_regs_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Channel Characteristics
-+ * Register. Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
-+ * hcchar register.
-+ */
-+typedef union hcchar_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct {
-+ /** Channel enable */
-+ unsigned chen : 1;
-+ /** Channel disable */
-+ unsigned chdis : 1;
-+ /**
-+ * Frame to transmit periodic transaction.
-+ * 0: even, 1: odd
-+ */
-+ unsigned oddfrm : 1;
-+ /** Device address */
-+ unsigned devaddr : 7;
-+ /** Packets per frame for periodic transfers. 0 is reserved. */
-+ unsigned multicnt : 2;
-+ /** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */
-+ unsigned eptype : 2;
-+ /** 0: Full/high speed device, 1: Low speed device */
-+ unsigned lspddev : 1;
-+ unsigned reserved : 1;
-+ /** 0: OUT, 1: IN */
-+ unsigned epdir : 1;
-+ /** Endpoint number */
-+ unsigned epnum : 4;
-+ /** Maximum packet size in bytes */
-+ unsigned mps : 11;
-+ } b;
-+} hcchar_data_t;
-+
-+typedef union hcsplt_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct {
-+ /** Split Enble */
-+ unsigned spltena : 1;
-+ /** Reserved */
-+ unsigned reserved : 14;
-+ /** Do Complete Split */
-+ unsigned compsplt : 1;
-+ /** Transaction Position */
-+#define DWC_HCSPLIT_XACTPOS_MID 0
-+#define DWC_HCSPLIT_XACTPOS_END 1
-+#define DWC_HCSPLIT_XACTPOS_BEGIN 2
-+#define DWC_HCSPLIT_XACTPOS_ALL 3
-+ unsigned xactpos : 2;
-+ /** Hub Address */
-+ unsigned hubaddr : 7;
-+ /** Port Address */
-+ unsigned prtaddr : 7;
-+ } b;
-+} hcsplt_data_t;
-+
-+
-+/**
-+ * This union represents the bit fields in the Host All Interrupt
-+ * Register.
-+ */
-+typedef union hcint_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** Reserved */
-+ unsigned reserved : 21;
-+ /** Data Toggle Error */
-+ unsigned datatglerr : 1;
-+ /** Frame Overrun */
-+ unsigned frmovrun : 1;
-+ /** Babble Error */
-+ unsigned bblerr : 1;
-+ /** Transaction Err */
-+ unsigned xacterr : 1;
-+ /** NYET Response Received */
-+ unsigned nyet : 1;
-+ /** ACK Response Received */
-+ unsigned ack : 1;
-+ /** NAK Response Received */
-+ unsigned nak : 1;
-+ /** STALL Response Received */
-+ unsigned stall : 1;
-+ /** AHB Error */
-+ unsigned ahberr : 1;
-+ /** Channel Halted */
-+ unsigned chhltd : 1;
-+ /** Transfer Complete */
-+ unsigned xfercomp : 1;
-+ } b;
-+} hcint_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Channel Transfer Size
-+ * Register. Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
-+ * hcchar register.
-+ */
-+typedef union hctsiz_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct {
-+ /** Do PING protocol when 1 */
-+ unsigned dopng : 1;
-+ /**
-+ * Packet ID for next data packet
-+ * 0: DATA0
-+ * 1: DATA2
-+ * 2: DATA1
-+ * 3: MDATA (non-Control), SETUP (Control)
-+ */
-+#define DWC_HCTSIZ_DATA0 0
-+#define DWC_HCTSIZ_DATA1 2
-+#define DWC_HCTSIZ_DATA2 1
-+#define DWC_HCTSIZ_MDATA 3
-+#define DWC_HCTSIZ_SETUP 3
-+ unsigned pid : 2;
-+ /** Data packets to transfer */
-+ unsigned pktcnt : 10;
-+ /** Total transfer size in bytes */
-+ unsigned xfersize : 19;
-+ } b;
-+} hctsiz_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Channel Interrupt Mask
-+ * Register. Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
-+ * hcintmsk register.
-+ */
-+typedef union hcintmsk_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct {
-+ unsigned reserved : 21;
-+ unsigned datatglerr : 1;
-+ unsigned frmovrun : 1;
-+ unsigned bblerr : 1;
-+ unsigned xacterr : 1;
-+ unsigned nyet : 1;
-+ unsigned ack : 1;
-+ unsigned nak : 1;
-+ unsigned stall : 1;
-+ unsigned ahberr : 1;
-+ unsigned chhltd : 1;
-+ unsigned xfercompl : 1;
-+ } b;
-+} hcintmsk_data_t;
-+
-+/** OTG Host Interface Structure.
-+ *
-+ * The OTG Host Interface Structure structure contains information
-+ * needed to manage the DWC_otg controller acting in host mode. It
-+ * represents the programming view of the host-specific aspects of the
-+ * controller.
-+ */
-+typedef struct dwc_otg_host_if {
-+ /** Host Global Registers starting at offset 400h.*/
-+ dwc_otg_host_global_regs_t *host_global_regs;
-+#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400
-+
-+ /** Host Port 0 Control and Status Register */
-+ volatile uint32_t *hprt0;
-+#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440
-+
-+
-+ /** Host Channel Specific Registers at offsets 500h-5FCh. */
-+ dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS];
-+#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500
-+#define DWC_OTG_CHAN_REGS_OFFSET 0x20
-+
-+
-+ /* Host configuration information */
-+ /** Number of Host Channels (range: 1-16) */
-+ uint8_t num_host_channels;
-+ /** Periodic EPs supported (0: no, 1: yes) */
-+ uint8_t perio_eps_supported;
-+ /** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */
-+ uint16_t perio_tx_fifo_size;
-+
-+} dwc_otg_host_if_t;
-+
-+#endif
--- /dev/null
+From 604835c84e9854d347a43b736b047d9789f19a00 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 23 Mar 2012 16:14:33 +0100
+Subject: [PATCH 48/73] dwc_otg: remove bogus halt_channel
+
+https://lists.openwrt.org/pipermail/openwrt-devel/2012-March/014524.html
+---
+ drivers/usb/dwc_otg/dwc_otg_hcd_intr.c | 2 --
+ 1 files changed, 0 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c b/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
+index 834b5e0..f6f3f3d 100644
+--- a/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
++++ b/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
+@@ -1278,8 +1278,6 @@ static int32_t handle_hc_ack_intr(dwc_otg_hcd_t *_hcd,
+ * automatically executes the PING, then the transfer.
+ */
+ halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_ACK, must_free);
+- } else {
+- halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
+ }
+ }
+
+--
+1.7.9.1
+
--- /dev/null
+From ad4f618fdcbeb60ce82094c51ba8ea26ab8a6af2 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 11 Mar 2012 15:59:39 +0100
+Subject: [PATCH 49/73] MIPS: adds ifxhcd
+
+---
+ arch/mips/lantiq/xway/Makefile | 2 +-
+ arch/mips/lantiq/xway/dev-ifxhcd.c | 45 +
+ arch/mips/lantiq/xway/dev-ifxhcd.h | 17 +
+ arch/mips/lantiq/xway/sysctrl.c | 2 +
+ drivers/usb/Kconfig | 2 +
+ drivers/usb/Makefile | 2 +
+ drivers/usb/ifxhcd/Kconfig | 58 +
+ drivers/usb/ifxhcd/Makefile | 85 +
+ drivers/usb/ifxhcd/TagHistory | 171 ++
+ drivers/usb/ifxhcd/ifxhcd.c | 2523 +++++++++++++++++++++++
+ drivers/usb/ifxhcd/ifxhcd.h | 628 ++++++
+ drivers/usb/ifxhcd/ifxhcd_es.c | 549 +++++
+ drivers/usb/ifxhcd/ifxhcd_intr.c | 3742 +++++++++++++++++++++++++++++++++++
+ drivers/usb/ifxhcd/ifxhcd_queue.c | 418 ++++
+ drivers/usb/ifxhcd/ifxusb_cif.c | 1458 ++++++++++++++
+ drivers/usb/ifxhcd/ifxusb_cif.h | 665 +++++++
+ drivers/usb/ifxhcd/ifxusb_cif_d.c | 458 +++++
+ drivers/usb/ifxhcd/ifxusb_cif_h.c | 846 ++++++++
+ drivers/usb/ifxhcd/ifxusb_ctl.c | 1385 +++++++++++++
+ drivers/usb/ifxhcd/ifxusb_driver.c | 970 +++++++++
+ drivers/usb/ifxhcd/ifxusb_plat.h | 1018 ++++++++++
+ drivers/usb/ifxhcd/ifxusb_regs.h | 1420 +++++++++++++
+ drivers/usb/ifxhcd/ifxusb_version.h | 5 +
+ 23 files changed, 16468 insertions(+), 1 deletions(-)
+ create mode 100644 arch/mips/lantiq/xway/dev-ifxhcd.c
+ create mode 100644 arch/mips/lantiq/xway/dev-ifxhcd.h
+ create mode 100644 drivers/usb/ifxhcd/Kconfig
+ create mode 100644 drivers/usb/ifxhcd/Makefile
+ create mode 100644 drivers/usb/ifxhcd/TagHistory
+ create mode 100644 drivers/usb/ifxhcd/ifxhcd.c
+ create mode 100644 drivers/usb/ifxhcd/ifxhcd.h
+ create mode 100644 drivers/usb/ifxhcd/ifxhcd_es.c
+ create mode 100644 drivers/usb/ifxhcd/ifxhcd_intr.c
+ create mode 100644 drivers/usb/ifxhcd/ifxhcd_queue.c
+ create mode 100644 drivers/usb/ifxhcd/ifxusb_cif.c
+ create mode 100644 drivers/usb/ifxhcd/ifxusb_cif.h
+ create mode 100644 drivers/usb/ifxhcd/ifxusb_cif_d.c
+ create mode 100644 drivers/usb/ifxhcd/ifxusb_cif_h.c
+ create mode 100644 drivers/usb/ifxhcd/ifxusb_ctl.c
+ create mode 100644 drivers/usb/ifxhcd/ifxusb_driver.c
+ create mode 100644 drivers/usb/ifxhcd/ifxusb_plat.h
+ create mode 100644 drivers/usb/ifxhcd/ifxusb_regs.h
+ create mode 100644 drivers/usb/ifxhcd/ifxusb_version.h
+
+diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
+index 4c3106f..c9baf91 100644
+--- a/arch/mips/lantiq/xway/Makefile
++++ b/arch/mips/lantiq/xway/Makefile
+@@ -1,4 +1,4 @@
+-obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o nand.o timer.o
++obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o nand.o timer.o dev-ifxhcd.o
+
+ obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
+ obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
+diff --git a/arch/mips/lantiq/xway/dev-ifxhcd.c b/arch/mips/lantiq/xway/dev-ifxhcd.c
+new file mode 100644
+index 0000000..ea08a35
+--- /dev/null
++++ b/arch/mips/lantiq/xway/dev-ifxhcd.c
+@@ -0,0 +1,45 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/string.h>
++#include <linux/mtd/physmap.h>
++#include <linux/kernel.h>
++#include <linux/reboot.h>
++#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <linux/etherdevice.h>
++#include <linux/reboot.h>
++#include <linux/time.h>
++#include <linux/io.h>
++#include <linux/gpio.h>
++#include <linux/leds.h>
++
++#include <asm/bootinfo.h>
++#include <asm/irq.h>
++
++#include <lantiq_soc.h>
++#include <lantiq_irq.h>
++#include <lantiq_platform.h>
++
++static u64 dmamask = (u32)0x1fffffff;
++
++static struct platform_device platform_dev = {
++ .name = "ifxusb_hcd",
++ .dev.dma_mask = &dmamask,
++};
++
++int __init
++xway_register_hcd(int *pins)
++{
++ platform_dev.dev.platform_data = pins;
++ return platform_device_register(&platform_dev);
++}
+diff --git a/arch/mips/lantiq/xway/dev-ifxhcd.h b/arch/mips/lantiq/xway/dev-ifxhcd.h
+new file mode 100644
+index 0000000..18b3d2d
+--- /dev/null
++++ b/arch/mips/lantiq/xway/dev-ifxhcd.h
+@@ -0,0 +1,17 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
++ */
++
++#ifndef _LTQ_DEV_HCD_H__
++#define _LTQ_DEV_HCD_H__
++
++#include <lantiq_platform.h>
++
++extern void __init xway_register_hcd(int *pin);
++
++#endif
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+index 1a2e2d4..ac7383f 100644
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -166,6 +166,8 @@ void __init ltq_soc_init(void)
+ clkdev_add_pmu("ltq_pcie", "pdi", 1, PMU1_PCIE_PDI);
+ clkdev_add_pmu("ltq_pcie", "ctl", 1, PMU1_PCIE_CTL);
+ clkdev_add_pmu("ltq_pcie", "ahb", 0, PMU_AHBM | PMU_AHBS);
++ clkdev_add_pmu("usb0", NULL, 0, (1<<6) | 1);
++ clkdev_add_pmu("usb1", NULL, 0, (1<<26) | (1<<27));
+ } else {
+ clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
+ ltq_danube_io_region_clock());
+diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
+index 1eafa7a..0f7926e 100644
+--- a/drivers/usb/Kconfig
++++ b/drivers/usb/Kconfig
+@@ -183,4 +183,6 @@ source "drivers/usb/gadget/Kconfig"
+
+ source "drivers/usb/otg/Kconfig"
+
++source "drivers/usb/ifxhcd/Kconfig"
++
+ endif # USB_SUPPORT
+diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
+index 7fe8e83..61b4c88 100644
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -57,3 +57,5 @@ obj-$(CONFIG_USB_OTG_UTILS) += otg/
+ obj-$(CONFIG_USB_GADGET) += gadget/
+
+ obj-$(CONFIG_USB_COMMON) += usb-common.o
++
++obj-$(CONFIG_USB_HOST_IFX) += ifxhcd/
+diff --git a/drivers/usb/ifxhcd/Kconfig b/drivers/usb/ifxhcd/Kconfig
+new file mode 100644
+index 0000000..7eb8ceb
+--- /dev/null
++++ b/drivers/usb/ifxhcd/Kconfig
+@@ -0,0 +1,58 @@
++
++config USB_HOST_IFX
++ tristate "Infineon USB Host Controller Driver"
++ depends on USB
++ default n
++ help
++ Infineon USB Host Controller
++
++config USB_HOST_IFX_B
++ bool "USB host mode on core 1 and 2"
++ depends on USB_HOST_IFX
++ help
++ Both cores run as host
++
++#config USB_HOST_IFX_1
++#config USB_HOST_IFX_2
++
++#config IFX_DANUBE
++#config IFX_AMAZON_SE
++config IFX_AR9
++ depends on USB_HOST_IFX
++ bool "AR9"
++
++config IFX_VR9
++ depends on USB_HOST_IFX
++ bool "VR9"
++
++#config USB_HOST_IFX_FORCE_USB11
++# bool "Forced USB1.1"
++# depends on USB_HOST_IFX
++# default n
++# help
++# force to be USB 1.1
++
++#config USB_HOST_IFX_WITH_HS_ELECT_TST
++# bool "With HS_Electrical Test"
++# depends on USB_HOST_IFX
++# default n
++# help
++# With USBIF HSET routines
++
++#config USB_HOST_IFX_WITH_ISO
++# bool "With ISO transfer"
++# depends on USB_HOST_IFX
++# default n
++# help
++# With USBIF ISO transfer
++
++config USB_HOST_IFX_UNALIGNED_ADJ
++ bool "Adjust"
++ depends on USB_HOST_IFX
++ help
++ USB_HOST_IFX_UNALIGNED_ADJ
++
++#config USB_HOST_IFX_UNALIGNED_CHK
++#config USB_HOST_IFX_UNALIGNED_NONE
++
++
+diff --git a/drivers/usb/ifxhcd/Makefile b/drivers/usb/ifxhcd/Makefile
+new file mode 100644
+index 0000000..0a2ac99
+--- /dev/null
++++ b/drivers/usb/ifxhcd/Makefile
+@@ -0,0 +1,85 @@
++
++#
++# Makefile for USB Core files and filesystem
++#
++ ifxusb_host-objs := ifxusb_driver.o
++ ifxusb_host-objs += ifxusb_ctl.o
++ ifxusb_host-objs += ifxusb_cif.o
++ ifxusb_host-objs += ifxusb_cif_h.o
++ ifxusb_host-objs += ifxhcd.o
++ ifxusb_host-objs += ifxhcd_es.o
++ ifxusb_host-objs += ifxhcd_intr.o
++ ifxusb_host-objs += ifxhcd_queue.o
++
++ifeq ($(CONFIG_IFX_TWINPASS),y)
++ EXTRA_CFLAGS += -D__IS_TWINPASS__
++endif
++ifeq ($(CONFIG_IFX_DANUBE),y)
++ EXTRA_CFLAGS += -D__IS_DANUBE__
++endif
++ifeq ($(CONFIG_IFX_AMAZON_SE),y)
++ EXTRA_CFLAGS += -D__IS_AMAZON_SE__
++endif
++ifeq ($(CONFIG_IFX_AR9),y)
++ EXTRA_CFLAGS += -D__IS_AR9__
++endif
++ifeq ($(CONFIG_IFX_AMAZON_S),y)
++ EXTRA_CFLAGS += -D__IS_AR9__
++endif
++ifeq ($(CONFIG_IFX_VR9),y)
++ EXTRA_CFLAGS += -D__IS_VR9__
++endif
++
++ifeq ($(CONFIG_USB_HOST_IFX),y)
++ EXTRA_CFLAGS += -Dlinux -D__LINUX__
++ EXTRA_CFLAGS += -D__IS_HOST__
++ EXTRA_CFLAGS += -D__KERNEL__
++endif
++
++ifeq ($(CONFIG_USB_HOST_IFX),m)
++ EXTRA_CFLAGS += -Dlinux -D__LINUX__
++ EXTRA_CFLAGS += -D__IS_HOST__
++ EXTRA_CFLAGS += -D__KERNEL__
++endif
++
++ifeq ($(CONFIG_USB_DEBUG),y)
++ EXTRA_CFLAGS += -D__DEBUG__
++ EXTRA_CFLAGS += -D__ENABLE_DUMP__
++endif
++
++ifeq ($(CONFIG_USB_HOST_IFX_B),y)
++ EXTRA_CFLAGS += -D__IS_DUAL__
++endif
++ifeq ($(CONFIG_USB_HOST_IFX_1),y)
++ EXTRA_CFLAGS += -D__IS_FIRST__
++endif
++ifeq ($(CONFIG_USB_HOST_IFX_2),y)
++ EXTRA_CFLAGS += -D__IS_SECOND__
++endif
++
++ifeq ($(CONFIG_USB_HOST_IFX_FORCE_USB11),y)
++ EXTRA_CFLAGS += -D__FORCE_USB11__
++endif
++ifeq ($(CONFIG_USB_HOST_IFX_WITH_HS_ELECT_TST),y)
++ EXTRA_CFLAGS += -D__WITH_HS_ELECT_TST__
++endif
++ifeq ($(CONFIG_USB_HOST_IFX_WITH_ISO),y)
++ EXTRA_CFLAGS += -D__EN_ISOC__
++endif
++ifeq ($(CONFIG_USB_HOST_IFX_UNALIGNED_ADJ),y)
++ EXTRA_CFLAGS += -D__UNALIGNED_BUFFER_ADJ__
++endif
++ifeq ($(CONFIG_USB_HOST_IFX_UNALIGNED_CHK),y)
++ EXTRA_CFLAGS += -D__UNALIGNED_BUFFER_CHK__
++endif
++
++# EXTRA_CFLAGS += -D__DYN_SOF_INTR__
++ EXTRA_CFLAGS += -D__UEIP__
++# EXTRA_CFLAGS += -D__EN_ISOC__
++# EXTRA_CFLAGS += -D__EN_ISOC_SPLIT__
++
++## 20110628 AVM/WK New flag for less SOF IRQs
++ EXTRA_CFLAGS += -D__USE_TIMER_4_SOF__
++
++obj-$(CONFIG_USB_HOST_IFX) += ifxusb_host.o
++
+diff --git a/drivers/usb/ifxhcd/TagHistory b/drivers/usb/ifxhcd/TagHistory
+new file mode 100644
+index 0000000..3820d70
+--- /dev/null
++++ b/drivers/usb/ifxhcd/TagHistory
+@@ -0,0 +1,171 @@
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://embeddedvm/home/SVN/drivers/usb_host20/tags/5.18-r240-non_musb_ar9_vr9-SOF_Timer_Fixed
++| Erzeugt mit SVN-Tagger Version 3.74.
+++----------------------------------------------------------------------+
++FIX - Korrektur bei der SOF-Timer/IRQ Steuerung. (Bug in Tag 5.17)
++FIX - Fehlerbehandlung an mehreren Stellen korrigiert bzw. eingebaut.
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://embeddedvm/home/SVN/drivers/usb_host20/tags/5.17-r237-non_musb_ar9_vr9-2_6_32_41_Kompatibel
++| Erzeugt mit SVN-Tagger Version 3.73.
+++----------------------------------------------------------------------+
++FIX - Kompatiblität zum Update auf Kernel 2.6.32-41. Weiterhin für 28er geeignet.
++ENH - Reduktion der Interrruptlast durch Nutzung eines hrtimers anstatt SOF-IRQ.
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.16-r208-non_musb_ar9_vr9-20110421_Zero_Paket_Optimiert
++| Erzeugt mit SVN-Tagger Version 3.66.
+++----------------------------------------------------------------------+
++
++FIX - VR9 / AR9 - Zero Packet. Optimierung korrigiert.
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.15-r205-non_musb_ar9_vr9-20110421_Zero_Paket_WA_funktioniert
++| Erzeugt mit SVN-Tagger Version 3.66.
+++----------------------------------------------------------------------+
++
++FIX - VR9 / AR9 - "Zero Packet" funktioniert nun wirklich. Letzter Tag hatte einen Bug.
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.14-r202-non_musb_ar9_vr9-20110420_Zero_Paket_WA
++| Erzeugt mit SVN-Tagger Version 3.66.
+++----------------------------------------------------------------------+
++
++FIX - VR9 / AR9 - Zero Packet Workaround: ZLP wird nun geschickt wenn URB_ZERO_PACKET aktiv ist.
++ Wird von LTE Altair Firmware benoetig.
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.13-r199-non_musb_ar9_vr9-20110310_Init_Fix
++| Erzeugt mit SVN-Tagger Version 3.64.
+++----------------------------------------------------------------------+
++
++FIX - VR9 / AR9 - Timing der Initialisierungsphase angepasst zum Kernel 2.6.28 mit UGW-4.3.1.
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.12-r184-non_musb_ar9_vr9-20110118_Full_Speed_Fix
++| Erzeugt mit SVN-Tagger Version 3.58.
+++----------------------------------------------------------------------+
++AR9/VR9 (3370,6840,7320):
++Makefile - FIX - (Workaround) Debug Modus hilft gegen Enumerationsfehler bei Full Speed Drucker.
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.11-r175-non_musb_ar9_vr9-20101220_VR9_2_Ports_DMA_Fix
++| Erzeugt mit SVN-Tagger Version 3.58.
+++----------------------------------------------------------------------+
++
++FIX - VR9 - Workaround DMA Burst Size. Wenn beiden USB Ports benutzt werden, geht der USB Host nicht mehr.
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.10-r169-non_musb_ar9_vr9-Fix_Spontan_Reboot
++| Erzeugt mit SVN-Tagger Version 3.58.
+++----------------------------------------------------------------------+
++
++FIX - Endlosschleife führte zu einem spontanen Reboot.
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.9-r166-non_musb_ar9_vr9-20101112_deferred_completion
++| Erzeugt mit SVN-Tagger Version 3.58.
+++----------------------------------------------------------------------+
++
++ENH - Deferred URB Completion Mechanismus eingebaut. Nun ca. 10% schneller bei usb-storage.
++
++FIX - PING Flow Control gefixt.
++FIX - Channel Halt wird nun immer angerufen. (Split Transaction wurde nicht erfolgreich gestoppt).
++FIX - Spinlock Benutzung verbessert. Mehr Stabilitaet.
++
++CHG - Ubersetztungsoption __DEBUG__ ist nun abhaengig von CONFIG_USB_DEBUG
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.8-r149-non_musb_ar9_vr9-20100827_LTE_Interrupt_EP_Fix
++| Erzeugt mit SVN-Tagger Version 3.57.
+++----------------------------------------------------------------------+
++AR9/VR9 - FIX - Interrupt Packets gingen verloren, wegen falschem Timing beim OddFrame Bit.
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.7-r142-non_musb_ar9_vr9-20100728_Unaligned_Buf_Fix
++| Erzeugt mit SVN-Tagger Version 3.57.
+++----------------------------------------------------------------------+
++FIX - "Unaligned Data" Flag wieder nach Transfer geloescht.
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.6-r133-non_musb_ar9_vr9-20100714_Toggle_Datenverlust_Fix
++| Erzeugt mit SVN-Tagger Version 3.57.
+++----------------------------------------------------------------------+
++TL5508 - Einige UMTS Modems funktionierten nicht korrekt an der 7320 (AR9).
++FIX - USB Data Toggle des usbcore benutzen. Datenverlust nach EP-Halt.
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.5-r130-non_musb_ar9_vr9-20100712_USB_Ports_abschaltbar
++| Erzeugt mit SVN-Tagger Version 3.57.
+++----------------------------------------------------------------------+
++Power - Fix - Beide USB Port abschaltbar bei rmmod.
++rmmod - FIX - URB_Dequeue funktionierte beim Entladen des Treibers nicht (mehrere Ursachen).
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.4-r126-non_musb_ar9_vr9-20100701_Lost_Interrupt_Workaround
++| Erzeugt mit SVN-Tagger Version 3.57.
+++----------------------------------------------------------------------+
++FIX - Workaround wegen verpasstem Interrupt, bei Full-Speed Interrupt EP.
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.3-r123-non_musb_ar9_vr9-20100630_UMTS_Fixes
++| Erzeugt mit SVN-Tagger Version 3.57.
+++----------------------------------------------------------------------+
++FIX - Full-Speed Interrupt Endpoint hinter Hi-Speed Hub funktioniert nun (UMTS Modems)
++FIX - usb_hcd_link_urb_from_ep API von USBCore muss benutzt werden.
++FIX - Interrupt URBs nicht bei NAK completen.
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.2-r114-non_musb_ar9_vr9-20100520_StickAndSurf_funktioniert
++| Erzeugt mit SVN-Tagger Version 3.56.
+++----------------------------------------------------------------------+
++- Merge mit neuen LANTIQ Sourcen "3.0alpha B100312"
++- Fix - Spin_lock eingebaut, Stick&Surf funktioniert nun
++
++- DEP - CONFIG_USB_HOST_IFX_WITH_ISO wird nicht unterstuetzt: In der Kernel Config deaktivieren.
++
++
++
+++----------------------------------------------------------------------+
++| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.1-r107-non_musb_ar9_vr9-20100505_IFXUSB_Host_mit_Energiemonitor
++| Erzeugt mit SVN-Tagger Version 3.56.
+++----------------------------------------------------------------------+
++USB Host Treiber für AR9 und VR9
++--------------------------------
++FIX - Toggle Error nach STALL - Einfacher Workaround - Nun werden Massenspeicherpartitionen erkannt!
++AVM_POWERMETER - USB Energiemonitor Support.
++
++Bekanntes Problem: Stick and Surf funktioniert nur sporadisch, weil CONTROL_IRQ manchmal ausbleibt.
++
+diff --git a/drivers/usb/ifxhcd/ifxhcd.c b/drivers/usb/ifxhcd/ifxhcd.c
+new file mode 100644
+index 0000000..d2ae125
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxhcd.c
+@@ -0,0 +1,2523 @@
++/*****************************************************************************
++ ** FILE NAME : ifxhcd.c
++ ** PROJECT : IFX USB sub-system V3
++ ** MODULES : IFX USB sub-system Host and Device driver
++ ** SRC VERSION : 1.0
++ ** DATE : 1/Jan/2009
++ ** AUTHOR : Chen, Howard
++ ** DESCRIPTION : This file contains the structures, constants, and interfaces for
++ ** the Host Contoller Driver (HCD).
++ **
++ ** The Host Controller Driver (HCD) is responsible for translating requests
++ ** from the USB Driver into the appropriate actions on the IFXUSB controller.
++ ** It isolates the USBD from the specifics of the controller by providing an
++ ** API to the USBD.
++ *****************************************************************************/
++
++/*!
++ \file ifxhcd.c
++ \ingroup IFXUSB_DRIVER_V3
++ \brief This file contains the implementation of the HCD. In Linux,
++ the HCD implements the hc_driver API.
++*/
++
++#include <linux/version.h>
++#include "ifxusb_version.h"
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++
++#include <linux/device.h>
++
++#include <linux/errno.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/string.h>
++
++#include <linux/dma-mapping.h>
++
++
++#include "ifxusb_plat.h"
++#include "ifxusb_regs.h"
++#include "ifxusb_cif.h"
++#include "ifxhcd.h"
++
++#include <asm/irq.h>
++
++#ifdef CONFIG_AVM_POWERMETER
++#include <linux/avm_power.h>
++#endif /*--- #ifdef CONFIG_AVM_POWERMETER ---*/
++
++#ifdef __DEBUG__
++ static void dump_urb_info(struct urb *_urb, char* _fn_name);
++ static void dump_channel_info(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh);
++#endif
++
++
++/*!
++ \brief Sets the final status of an URB and returns it to the device driver. Any
++ required cleanup of the URB is performed.
++ */
++void ifxhcd_complete_urb(ifxhcd_hcd_t *_ifxhcd, ifxhcd_urbd_t *_urbd, int _status)
++{
++ struct urb *urb=NULL;
++ unsigned long flags = 0;
++
++ /*== AVM/BC 20101111 Function called with Lock ==*/
++ //SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
++
++ if (!list_empty(&_urbd->urbd_list_entry))
++ list_del_init (&_urbd->urbd_list_entry);
++
++ if(!_urbd->urb)
++ {
++ IFX_ERROR("%s: invalid urb\n",__func__);
++ /*== AVM/BC 20101111 Function called with Lock ==*/
++ //SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
++ return;
++ }
++
++ urb=_urbd->urb;
++
++ #ifdef __DEBUG__
++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB))
++ {
++ IFX_PRINT("%s: _urbd %p, urb %p, device %d, ep %d %s/%s, status=%d\n",
++ __func__, _urbd,_urbd->urb, usb_pipedevice(_urbd->urb->pipe),
++ usb_pipeendpoint(_urbd->urb->pipe),
++ usb_pipein(_urbd->urb->pipe) ? "IN" : "OUT",
++ (_urbd->is_in) ? "IN" : "OUT",
++ _status);
++ if (_urbd->epqh->ep_type == IFXUSB_EP_TYPE_ISOC)
++ {
++ int i;
++ for (i = 0; i < _urbd->urb->number_of_packets; i++)
++ IFX_PRINT(" ISO Desc %d status: %d\n", i, _urbd->urb->iso_frame_desc[i].status);
++ }
++ }
++ #endif
++
++ if (!_urbd->epqh)
++ IFX_ERROR("%s: invalid epqd\n",__func__);
++
++ #if defined(__UNALIGNED_BUFFER_ADJ__)
++ else if(_urbd->is_active)
++ {
++ if( _urbd->epqh->aligned_checked &&
++ _urbd->epqh->using_aligned_buf &&
++ _urbd->xfer_buff &&
++ _urbd->is_in )
++ memcpy(_urbd->xfer_buff,_urbd->epqh->aligned_buf,_urbd->xfer_len);
++ _urbd->epqh->using_aligned_buf=0;
++ _urbd->epqh->using_aligned_setup=0;
++ _urbd->epqh->aligned_checked=0;
++ }
++ #endif
++
++ urb->status = _status;
++ urb->hcpriv=NULL;
++ kfree(_urbd);
++
++ usb_hcd_unlink_urb_from_ep(ifxhcd_to_syshcd(_ifxhcd), urb);
++ SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
++
++// usb_hcd_giveback_urb(ifxhcd_to_syshcd(_ifxhcd), urb);
++ usb_hcd_giveback_urb(ifxhcd_to_syshcd(_ifxhcd), urb, _status);
++
++ /*== AVM/BC 20100630 - 2.6.28 needs HCD link/unlink URBs ==*/
++ SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
++}
++
++/*== AVM/BC 20101111 URB Complete deferred
++ * Must be called with Spinlock
++ */
++
++/*!
++ \brief Inserts an urbd structur in the completion list. The urbd will be
++ later completed by select_eps_sub
++ */
++void defer_ifxhcd_complete_urb(ifxhcd_hcd_t *_ifxhcd, ifxhcd_urbd_t *_urbd, int _status)
++{
++
++ _urbd->status = _status;
++
++ //Unlink Urbd from epqh / Insert it into the complete list
++ list_move_tail(&_urbd->urbd_list_entry, &_ifxhcd->urbd_complete_list);
++
++}
++
++/*!
++ \brief Processes all the URBs in a single EPQHs. Completes them with
++ status and frees the URBD.
++ */
++//static
++void kill_all_urbs_in_epqh(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh, int _status)
++{
++ struct list_head *urbd_item;
++ ifxhcd_urbd_t *urbd;
++
++ if(!_epqh)
++ return;
++
++ for (urbd_item = _epqh->urbd_list.next;
++ urbd_item != &_epqh->urbd_list;
++ urbd_item = _epqh->urbd_list.next)
++ {
++ urbd = list_entry(urbd_item, ifxhcd_urbd_t, urbd_list_entry);
++ ifxhcd_complete_urb(_ifxhcd, urbd, _status);
++ }
++}
++
++
++/*!
++ \brief Free all EPS in one Processes all the URBs in a single list of EPQHs. Completes them with
++ -ETIMEDOUT and frees the URBD.
++ */
++//static
++void epqh_list_free(ifxhcd_hcd_t *_ifxhcd, struct list_head *_epqh_list)
++{
++ struct list_head *item;
++ ifxhcd_epqh_t *epqh;
++
++ if (!_epqh_list)
++ return;
++ if (_epqh_list->next == NULL) /* The list hasn't been initialized yet. */
++ return;
++
++ /* Ensure there are no URBDs or URBs left. */
++ for (item = _epqh_list->next; item != _epqh_list; item = _epqh_list->next)
++ {
++ epqh = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
++ kill_all_urbs_in_epqh(_ifxhcd, epqh, -ETIMEDOUT);
++ ifxhcd_epqh_free(epqh);
++ }
++}
++
++
++
++//static
++void epqh_list_free_all(ifxhcd_hcd_t *_ifxhcd)
++{
++ unsigned long flags;
++
++ /*== AVM/BC 20101111 - 2.6.28 Needs Spinlock ==*/
++ SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
++
++ epqh_list_free(_ifxhcd, &_ifxhcd->epqh_np_active );
++ epqh_list_free(_ifxhcd, &_ifxhcd->epqh_np_ready );
++ epqh_list_free(_ifxhcd, &_ifxhcd->epqh_intr_active );
++ epqh_list_free(_ifxhcd, &_ifxhcd->epqh_intr_ready );
++ #ifdef __EN_ISOC__
++ epqh_list_free(_ifxhcd, &_ifxhcd->epqh_isoc_active );
++ epqh_list_free(_ifxhcd, &_ifxhcd->epqh_isoc_ready );
++ #endif
++ epqh_list_free(_ifxhcd, &_ifxhcd->epqh_stdby );
++
++ SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
++
++}
++
++
++/*!
++ \brief This function is called to handle the disconnection of host port.
++ */
++int32_t ifxhcd_disconnect(ifxhcd_hcd_t *_ifxhcd)
++{
++ IFX_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _ifxhcd);
++
++ /* Set status flags for the hub driver. */
++ _ifxhcd->flags.b.port_connect_status_change = 1;
++ _ifxhcd->flags.b.port_connect_status = 0;
++
++ /*
++ * Shutdown any transfers in process by clearing the Tx FIFO Empty
++ * interrupt mask and status bits and disabling subsequent host
++ * channel interrupts.
++ */
++ {
++ gint_data_t intr = { .d32 = 0 };
++ intr.b.nptxfempty = 1;
++ intr.b.ptxfempty = 1;
++ intr.b.hcintr = 1;
++ ifxusb_mreg (&_ifxhcd->core_if.core_global_regs->gintmsk, intr.d32, 0);
++ ifxusb_mreg (&_ifxhcd->core_if.core_global_regs->gintsts, intr.d32, 0);
++ }
++
++ /* Respond with an error status to all URBs in the schedule. */
++ epqh_list_free_all(_ifxhcd);
++
++ /* Clean up any host channels that were in use. */
++ {
++ int num_channels;
++ ifxhcd_hc_t *channel;
++ ifxusb_hc_regs_t *hc_regs;
++ hcchar_data_t hcchar;
++ int i;
++
++ num_channels = _ifxhcd->core_if.params.host_channels;
++
++ for (i = 0; i < num_channels; i++)
++ {
++ channel = &_ifxhcd->ifxhc[i];
++ if (list_empty(&channel->hc_list_entry))
++ {
++ hc_regs = _ifxhcd->core_if.hc_regs[i];
++ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++ if (hcchar.b.chen)
++ {
++ /* Halt the channel. */
++ hcchar.b.chdis = 1;
++ ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
++ }
++ list_add_tail(&channel->hc_list_entry, &_ifxhcd->free_hc_list);
++ ifxhcd_hc_cleanup(&_ifxhcd->core_if, channel);
++ }
++ }
++ }
++ return 1;
++}
++
++
++/*!
++ \brief Frees secondary storage associated with the ifxhcd_hcd structure contained
++ in the struct usb_hcd field.
++ */
++static void ifxhcd_freeextra(struct usb_hcd *_syshcd)
++{
++ ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd(_syshcd);
++
++ IFX_DEBUGPL(DBG_HCD, "IFXUSB HCD FREE\n");
++
++ /* Free memory for EPQH/URBD lists */
++ epqh_list_free_all(ifxhcd);
++
++ /* Free memory for the host channels. */
++ ifxusb_free_buf(ifxhcd->status_buf);
++ return;
++}
++#ifdef __USE_TIMER_4_SOF__
++static enum hrtimer_restart ifxhcd_timer_func(struct hrtimer *timer) {
++ ifxhcd_hcd_t *ifxhcd = container_of(timer, ifxhcd_hcd_t, hr_timer);
++
++ ifxhcd_handle_intr(ifxhcd);
++
++ return HRTIMER_NORESTART;
++}
++#endif
++
++/*!
++ \brief Initializes the HCD. This function allocates memory for and initializes the
++ static parts of the usb_hcd and ifxhcd_hcd structures. It also registers the
++ USB bus with the core and calls the hc_driver->start() function. It returns
++ a negative error on failure.
++ */
++int ifxhcd_init(ifxhcd_hcd_t *_ifxhcd)
++{
++ int retval = 0;
++ struct usb_hcd *syshcd = NULL;
++
++ IFX_DEBUGPL(DBG_HCD, "IFX USB HCD INIT\n");
++
++ spin_lock_init(&_ifxhcd->lock);
++#ifdef __USE_TIMER_4_SOF__
++ hrtimer_init(&_ifxhcd->hr_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
++ _ifxhcd->hr_timer.function = ifxhcd_timer_func;
++#endif
++ _ifxhcd->hc_driver.description = _ifxhcd->core_if.core_name;
++ _ifxhcd->hc_driver.product_desc = "IFX USB Controller";
++ //_ifxhcd->hc_driver.hcd_priv_size = sizeof(ifxhcd_hcd_t);
++ _ifxhcd->hc_driver.hcd_priv_size = sizeof(unsigned long);
++ _ifxhcd->hc_driver.irq = ifxhcd_irq;
++ _ifxhcd->hc_driver.flags = HCD_MEMORY | HCD_USB2;
++ _ifxhcd->hc_driver.start = ifxhcd_start;
++ _ifxhcd->hc_driver.stop = ifxhcd_stop;
++ //_ifxhcd->hc_driver.reset =
++ //_ifxhcd->hc_driver.suspend =
++ //_ifxhcd->hc_driver.resume =
++ _ifxhcd->hc_driver.urb_enqueue = ifxhcd_urb_enqueue;
++ _ifxhcd->hc_driver.urb_dequeue = ifxhcd_urb_dequeue;
++ _ifxhcd->hc_driver.endpoint_disable = ifxhcd_endpoint_disable;
++ _ifxhcd->hc_driver.get_frame_number = ifxhcd_get_frame_number;
++ _ifxhcd->hc_driver.hub_status_data = ifxhcd_hub_status_data;
++ _ifxhcd->hc_driver.hub_control = ifxhcd_hub_control;
++ //_ifxhcd->hc_driver.hub_suspend =
++ //_ifxhcd->hc_driver.hub_resume =
++
++ /* Allocate memory for and initialize the base HCD and */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
++ syshcd = usb_create_hcd(&_ifxhcd->hc_driver, _ifxhcd->dev, _ifxhcd->core_if.core_name);
++#else
++ syshcd = usb_create_hcd(&_ifxhcd->hc_driver, _ifxhcd->dev, _ifxhcd->dev->bus_id);
++#endif
++
++ if (syshcd == NULL)
++ {
++ retval = -ENOMEM;
++ goto error1;
++ }
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
++ syshcd->has_tt = 1;
++#endif
++
++ syshcd->rsrc_start = (unsigned long)_ifxhcd->core_if.core_global_regs;
++ syshcd->regs = (void *)_ifxhcd->core_if.core_global_regs;
++ syshcd->self.otg_port = 0;
++
++ //*((unsigned long *)(&(syshcd->hcd_priv)))=(unsigned long)_ifxhcd;
++ //*((unsigned long *)(&(syshcd->hcd_priv[0])))=(unsigned long)_ifxhcd;
++ syshcd->hcd_priv[0]=(unsigned long)_ifxhcd;
++ _ifxhcd->syshcd=syshcd;
++
++ INIT_LIST_HEAD(&_ifxhcd->epqh_np_active );
++ INIT_LIST_HEAD(&_ifxhcd->epqh_np_ready );
++ INIT_LIST_HEAD(&_ifxhcd->epqh_intr_active );
++ INIT_LIST_HEAD(&_ifxhcd->epqh_intr_ready );
++ #ifdef __EN_ISOC__
++ INIT_LIST_HEAD(&_ifxhcd->epqh_isoc_active );
++ INIT_LIST_HEAD(&_ifxhcd->epqh_isoc_ready );
++ #endif
++ INIT_LIST_HEAD(&_ifxhcd->epqh_stdby );
++ INIT_LIST_HEAD(&_ifxhcd->urbd_complete_list);
++
++ /*
++ * Create a host channel descriptor for each host channel implemented
++ * in the controller. Initialize the channel descriptor array.
++ */
++ INIT_LIST_HEAD(&_ifxhcd->free_hc_list);
++ {
++ int num_channels = _ifxhcd->core_if.params.host_channels;
++ int i;
++ for (i = 0; i < num_channels; i++)
++ {
++ _ifxhcd->ifxhc[i].hc_num = i;
++ IFX_DEBUGPL(DBG_HCDV, "HCD Added channel #%d\n", i);
++ }
++ }
++
++ /* Set device flags indicating whether the HCD supports DMA. */
++ if(_ifxhcd->dev->dma_mask)
++ *(_ifxhcd->dev->dma_mask) = ~0;
++ _ifxhcd->dev->coherent_dma_mask = ~0;
++
++ /*
++ * Finish generic HCD initialization and start the HCD. This function
++ * allocates the DMA buffer pool, registers the USB bus, requests the
++ * IRQ line, and calls ifxusb_hcd_start method.
++ */
++// retval = usb_add_hcd(syshcd, _ifxhcd->core_if.irq, SA_INTERRUPT|SA_SHIRQ);
++ retval = usb_add_hcd(syshcd, _ifxhcd->core_if.irq, IRQF_DISABLED | IRQF_SHARED );
++ if (retval < 0)
++ goto error2;
++
++ /*
++ * Allocate space for storing data on status transactions. Normally no
++ * data is sent, but this space acts as a bit bucket. This must be
++ * done after usb_add_hcd since that function allocates the DMA buffer
++ * pool.
++ */
++ _ifxhcd->status_buf = ifxusb_alloc_buf(IFXHCD_STATUS_BUF_SIZE, 1);
++
++ if (_ifxhcd->status_buf)
++ {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
++ IFX_DEBUGPL(DBG_HCD, "IFX USB HCD Initialized, bus=%s, usbbus=%d\n", _ifxhcd->core_if.core_name, syshcd->self.busnum);
++#else
++ IFX_DEBUGPL(DBG_HCD, "IFX USB HCD Initialized, bus=%s, usbbus=%d\n", _ifxhcd->dev->bus_id, syshcd->self.busnum);
++#endif
++ return 0;
++ }
++ IFX_ERROR("%s: status_buf allocation failed\n", __func__);
++
++ /* Error conditions */
++ usb_remove_hcd(syshcd);
++error2:
++ ifxhcd_freeextra(syshcd);
++ usb_put_hcd(syshcd);
++error1:
++ return retval;
++}
++
++/*!
++ \brief Removes the HCD.
++ Frees memory and resources associated with the HCD and deregisters the bus.
++ */
++void ifxhcd_remove(ifxhcd_hcd_t *_ifxhcd)
++{
++ struct usb_hcd *syshcd = ifxhcd_to_syshcd(_ifxhcd);
++
++ IFX_DEBUGPL(DBG_HCD, "IFX USB HCD REMOVE\n");
++
++/* == AVM/WK 20100709 - Fix: Order changed, disable IRQs not before remove_hcd == */
++
++ usb_remove_hcd(syshcd);
++
++ /* Turn off all interrupts */
++ ifxusb_wreg (&_ifxhcd->core_if.core_global_regs->gintmsk, 0);
++ ifxusb_mreg (&_ifxhcd->core_if.core_global_regs->gahbcfg, 1, 0);
++
++ ifxhcd_freeextra(syshcd);
++
++ usb_put_hcd(syshcd);
++
++ return;
++}
++
++
++/* =========================================================================
++ * Linux HC Driver Functions
++ * ========================================================================= */
++
++/*!
++ \brief Initializes the IFXUSB controller and its root hub and prepares it for host
++ mode operation. Activates the root port. Returns 0 on success and a negative
++ error code on failure.
++ Called by USB stack.
++ */
++int ifxhcd_start(struct usb_hcd *_syshcd)
++{
++ ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd (_syshcd);
++ ifxusb_core_if_t *core_if = &ifxhcd->core_if;
++ struct usb_bus *bus;
++
++ IFX_DEBUGPL(DBG_HCD, "IFX USB HCD START\n");
++
++ bus = hcd_to_bus(_syshcd);
++
++ /* Initialize the bus state. */
++ _syshcd->state = HC_STATE_RUNNING;
++
++ /* Initialize and connect root hub if one is not already attached */
++ if (bus->root_hub)
++ {
++ IFX_DEBUGPL(DBG_HCD, "IFX USB HCD Has Root Hub\n");
++ /* Inform the HUB driver to resume. */
++ usb_hcd_resume_root_hub(_syshcd);
++ }
++
++ ifxhcd->flags.d32 = 0;
++
++ /* Put all channels in the free channel list and clean up channel states.*/
++ {
++ struct list_head *item;
++ item = ifxhcd->free_hc_list.next;
++ while (item != &ifxhcd->free_hc_list)
++ {
++ list_del(item);
++ item = ifxhcd->free_hc_list.next;
++ }
++ }
++ {
++ int num_channels = ifxhcd->core_if.params.host_channels;
++ int i;
++ for (i = 0; i < num_channels; i++)
++ {
++ ifxhcd_hc_t *channel;
++ channel = &ifxhcd->ifxhc[i];
++ list_add_tail(&channel->hc_list_entry, &ifxhcd->free_hc_list);
++ ifxhcd_hc_cleanup(&ifxhcd->core_if, channel);
++ }
++ }
++ /* Initialize the USB core for host mode operation. */
++
++ ifxusb_host_enable_interrupts(core_if);
++ ifxusb_enable_global_interrupts(core_if);
++ ifxusb_phy_power_on (core_if);
++
++ ifxusb_vbus_init(core_if);
++
++ /* Turn on the vbus power. */
++ {
++ hprt0_data_t hprt0;
++ hprt0.d32 = ifxusb_read_hprt0(core_if);
++
++ IFX_PRINT("Init: Power Port (%d)\n", hprt0.b.prtpwr);
++ if (hprt0.b.prtpwr == 0 )
++ {
++ hprt0.b.prtpwr = 1;
++ ifxusb_wreg(core_if->hprt0, hprt0.d32);
++ ifxusb_vbus_on(core_if);
++ }
++ }
++ return 0;
++}
++
++
++/*!
++ \brief Halts the IFXUSB host mode operations in a clean manner. USB transfers are
++ stopped.
++ */
++void ifxhcd_stop(struct usb_hcd *_syshcd)
++{
++ ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd(_syshcd);
++ hprt0_data_t hprt0 = { .d32=0 };
++
++ IFX_DEBUGPL(DBG_HCD, "IFX USB HCD STOP\n");
++
++ /* Turn off all interrupts. */
++ ifxusb_disable_global_interrupts(&ifxhcd->core_if );
++ ifxusb_host_disable_interrupts(&ifxhcd->core_if );
++#ifdef __USE_TIMER_4_SOF__
++ hrtimer_cancel(&ifxhcd->hr_timer);
++#endif
++ /*
++ * The root hub should be disconnected before this function is called.
++ * The disconnect will clear the URBD lists (via ..._hcd_urb_dequeue)
++ * and the EPQH lists (via ..._hcd_endpoint_disable).
++ */
++
++ /* Turn off the vbus power */
++ IFX_PRINT("PortPower off\n");
++
++ ifxusb_vbus_off(&ifxhcd->core_if );
++
++ ifxusb_vbus_free(&ifxhcd->core_if );
++
++ hprt0.b.prtpwr = 0;
++ ifxusb_wreg(ifxhcd->core_if.hprt0, hprt0.d32);
++ return;
++}
++
++/*!
++ \brief Returns the current frame number
++ */
++int ifxhcd_get_frame_number(struct usb_hcd *_syshcd)
++{
++ ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd(_syshcd);
++ hfnum_data_t hfnum;
++
++ hfnum.d32 = ifxusb_rreg(&ifxhcd->core_if.host_global_regs->hfnum);
++
++ return hfnum.b.frnum;
++}
++
++/*!
++ \brief Starts processing a USB transfer request specified by a USB Request Block
++ (URB). mem_flags indicates the type of memory allocation to use while
++ processing this URB.
++ */
++int ifxhcd_urb_enqueue( struct usb_hcd *_syshcd,
++ /*--- struct usb_host_endpoint *_sysep, Parameter im 2.6.28 entfallen ---*/
++ struct urb *_urb,
++ gfp_t _mem_flags)
++{
++ int retval = 0;
++ ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd (_syshcd);
++ struct usb_host_endpoint *_sysep = ifxhcd_urb_to_endpoint(_urb);
++ ifxhcd_epqh_t *epqh;
++
++ #ifdef __DEBUG__
++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB))
++ dump_urb_info(_urb, "ifxusb_hcd_urb_enqueue");
++ #endif //__DEBUG__
++
++ if (!ifxhcd->flags.b.port_connect_status) /* No longer connected. */
++ return -ENODEV;
++
++ #ifndef __EN_ISOC__
++ if(usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS)
++ {
++ IFX_ERROR("ISOC transfer not supported!!!\n");
++ return -ENODEV;
++ }
++ #endif
++
++ retval=ifxhcd_urbd_create (ifxhcd,_urb);
++
++ if (retval)
++ {
++ IFX_ERROR("IFXUSB HCD URB Enqueue failed creating URBD\n");
++ return retval;
++ }
++ epqh = (ifxhcd_epqh_t *) _sysep->hcpriv;
++ ifxhcd_epqh_ready(ifxhcd, epqh);
++
++ select_eps(ifxhcd);
++ //enable_sof(ifxhcd);
++ {
++ gint_data_t gintsts;
++ gintsts.d32=0;
++ gintsts.b.sofintr = 1;
++ ifxusb_mreg(&ifxhcd->core_if.core_global_regs->gintmsk, 0,gintsts.d32);
++ }
++
++ return retval;
++}
++
++/*!
++ \brief Aborts/cancels a USB transfer request. Always returns 0 to indicate
++ success.
++ */
++int ifxhcd_urb_dequeue( struct usb_hcd *_syshcd,
++ struct urb *_urb, int status /* Parameter neu in 2.6.28 */)
++{
++ unsigned long flags;
++ ifxhcd_hcd_t *ifxhcd;
++ ifxhcd_urbd_t *urbd;
++ ifxhcd_epqh_t *epqh;
++ int is_active=0;
++ int rc;
++
++ struct usb_host_endpoint *_sysep;
++
++ IFX_DEBUGPL(DBG_HCD, "IFXUSB HCD URB Dequeue\n");
++
++ #ifndef __EN_ISOC__
++ if(usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS)
++ return 0;
++ #endif
++
++ _sysep = ifxhcd_urb_to_endpoint(_urb);
++
++ ifxhcd = syshcd_to_ifxhcd(_syshcd);
++
++ SPIN_LOCK_IRQSAVE(&ifxhcd->lock, flags);
++
++ /*== AVM/BC 20100630 - 2.6.28 needs HCD link/unlink URBs ==*/
++ rc = usb_hcd_check_unlink_urb(_syshcd, _urb, status);
++ if (rc) {
++ SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
++ return rc;
++ }
++
++ urbd = (ifxhcd_urbd_t *) _urb->hcpriv;
++
++ if(_sysep)
++ epqh = (ifxhcd_epqh_t *) _sysep->hcpriv;
++ else
++ epqh = (ifxhcd_epqh_t *) urbd->epqh;
++
++ if(epqh!=urbd->epqh)
++ IFX_ERROR("%s inconsistant epqh %p %p\n",__func__,epqh,urbd->epqh);
++
++ #ifdef __DEBUG__
++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB))
++ {
++ dump_urb_info(_urb, "ifxhcd_urb_dequeue");
++ if (epqh->is_active)
++ dump_channel_info(ifxhcd, epqh);
++ }
++ #endif //__DEBUG__
++
++ if(!epqh->hc)
++ epqh->is_active=0;
++ else if (!ifxhcd->flags.b.port_connect_status)
++ epqh->is_active=0;
++ else if (epqh->is_active && urbd->is_active)
++ {
++ /*== AVM/WK 20100709 - halt channel only if really started ==*/
++ //if (epqh->hc->xfer_started && !epqh->hc->wait_for_sof) {
++ /*== AVM/WK 20101112 - halt channel if started ==*/
++ if (epqh->hc->xfer_started) {
++ /*
++ * If still connected (i.e. in host mode), halt the
++ * channel so it can be used for other transfers. If
++ * no longer connected, the host registers can't be
++ * written to halt the channel since the core is in
++ * device mode.
++ */
++ /* == 20110803 AVM/WK FIX propagate status == */
++ if (_urb->status == -EINPROGRESS) {
++ _urb->status = status;
++ }
++ ifxhcd_hc_halt(&ifxhcd->core_if, epqh->hc, HC_XFER_URB_DEQUEUE);
++ epqh->hc = NULL;
++ is_active=1;
++ }
++ }
++
++ if(is_active)
++ {
++ SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
++ }
++ else
++ {
++ list_del_init(&urbd->urbd_list_entry);
++ kfree (urbd);
++
++ /*== AVM/BC 20100630 - 2.6.28 needs HCD link/unlink URBs ==*/
++ usb_hcd_unlink_urb_from_ep(_syshcd, _urb);
++
++ SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
++ _urb->hcpriv = NULL;
++// usb_hcd_giveback_urb(_syshcd, _urb);
++ usb_hcd_giveback_urb(_syshcd, _urb, status /* neu in 2.6.28 */);
++ select_eps(ifxhcd);
++ }
++
++ return 0;
++}
++
++
++
++/*!
++ \brief Frees resources in the IFXUSB controller related to a given endpoint. Also
++ clears state in the HCD related to the endpoint. Any URBs for the endpoint
++ must already be dequeued.
++ */
++void ifxhcd_endpoint_disable( struct usb_hcd *_syshcd,
++ struct usb_host_endpoint *_sysep)
++{
++ ifxhcd_epqh_t *epqh;
++ ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd(_syshcd);
++ unsigned long flags;
++
++ int retry = 0;
++
++ IFX_DEBUGPL(DBG_HCD, "IFXUSB HCD EP DISABLE: _bEndpointAddress=0x%02x, "
++ "endpoint=%d\n", _sysep->desc.bEndpointAddress,
++ ifxhcd_ep_addr_to_endpoint(_sysep->desc.bEndpointAddress));
++
++ SPIN_LOCK_IRQSAVE(&ifxhcd->lock, flags);
++ if((uint32_t)_sysep>=0x80000000 && (uint32_t)_sysep->hcpriv>=(uint32_t)0x80000000)
++ {
++ epqh = (ifxhcd_epqh_t *)(_sysep->hcpriv);
++ if (epqh && epqh->sysep==_sysep)
++ {
++
++#if 1 /*== AVM/BC 20101111 CHG Option active: Kill URBs when disabling EP ==*/
++ while (!list_empty(&epqh->urbd_list))
++ {
++ if (retry++ > 250)
++ {
++ IFX_WARN("IFXUSB HCD EP DISABLE:"
++ " URBD List for this endpoint is not empty\n");
++ break;
++ }
++ kill_all_urbs_in_epqh(ifxhcd, epqh, -ETIMEDOUT);
++ }
++#else
++ while (!list_empty(&epqh->urbd_list))
++ {
++ /** Check that the QTD list is really empty */
++ if (retry++ > 250)
++ {
++ IFX_WARN("IFXUSB HCD EP DISABLE:"
++ " URBD List for this endpoint is not empty\n");
++ break;
++ }
++ SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
++ schedule_timeout_uninterruptible(1);
++ SPIN_LOCK_IRQSAVE(&ifxhcd->lock, flags);
++ }
++#endif
++
++ ifxhcd_epqh_free(epqh);
++ _sysep->hcpriv = NULL;
++ }
++ }
++ SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
++}
++
++
++/*!
++ \brief Handles host mode interrupts for the IFXUSB controller. Returns IRQ_NONE if
++ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
++ * interrupt.
++ *
++ * This function is called by the USB core when an interrupt occurs
++ */
++irqreturn_t ifxhcd_irq(struct usb_hcd *_syshcd)
++{
++ ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd (_syshcd);
++ int32_t retval=0;
++
++ //mask_and_ack_ifx_irq (ifxhcd->core_if.irq);
++ retval = ifxhcd_handle_intr(ifxhcd);
++ return IRQ_RETVAL(retval);
++}
++
++
++/*!
++ \brief Handles host mode Over Current Interrupt
++ */
++irqreturn_t ifxhcd_oc_irq(int _irq , void *_dev)
++{
++ ifxhcd_hcd_t *ifxhcd = _dev;
++ int32_t retval=1;
++
++ ifxhcd->flags.b.port_over_current_change = 1;
++ ifxusb_vbus_off(&ifxhcd->core_if);
++ IFX_DEBUGP("OC INTERRUPT # %d\n",ifxhcd->core_if.core_no);
++
++ //mask_and_ack_ifx_irq (_irq);
++ return IRQ_RETVAL(retval);
++}
++
++/*!
++ \brief Creates Status Change bitmap for the root hub and root port. The bitmap is
++ returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
++ is the status change indicator for the single root port. Returns 1 if either
++ change indicator is 1, otherwise returns 0.
++ */
++int ifxhcd_hub_status_data(struct usb_hcd *_syshcd, char *_buf)
++{
++ ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd (_syshcd);
++
++ _buf[0] = 0;
++ _buf[0] |= (ifxhcd->flags.b.port_connect_status_change ||
++ ifxhcd->flags.b.port_reset_change ||
++ ifxhcd->flags.b.port_enable_change ||
++ ifxhcd->flags.b.port_suspend_change ||
++ ifxhcd->flags.b.port_over_current_change) << 1;
++
++ #ifdef __DEBUG__
++ if (_buf[0])
++ {
++ IFX_DEBUGPL(DBG_HCD, "IFXUSB HCD HUB STATUS DATA:"
++ " Root port status changed\n");
++ IFX_DEBUGPL(DBG_HCDV, " port_connect_status_change: %d\n",
++ ifxhcd->flags.b.port_connect_status_change);
++ IFX_DEBUGPL(DBG_HCDV, " port_reset_change: %d\n",
++ ifxhcd->flags.b.port_reset_change);
++ IFX_DEBUGPL(DBG_HCDV, " port_enable_change: %d\n",
++ ifxhcd->flags.b.port_enable_change);
++ IFX_DEBUGPL(DBG_HCDV, " port_suspend_change: %d\n",
++ ifxhcd->flags.b.port_suspend_change);
++ IFX_DEBUGPL(DBG_HCDV, " port_over_current_change: %d\n",
++ ifxhcd->flags.b.port_over_current_change);
++ }
++ #endif //__DEBUG__
++ return (_buf[0] != 0);
++}
++
++#ifdef __WITH_HS_ELECT_TST__
++ extern void do_setup(ifxusb_core_if_t *_core_if) ;
++ extern void do_in_ack(ifxusb_core_if_t *_core_if);
++#endif //__WITH_HS_ELECT_TST__
++
++/*!
++ \brief Handles hub class-specific requests.
++ */
++int ifxhcd_hub_control( struct usb_hcd *_syshcd,
++ u16 _typeReq,
++ u16 _wValue,
++ u16 _wIndex,
++ char *_buf,
++ u16 _wLength)
++{
++ int retval = 0;
++
++ ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd (_syshcd);
++ ifxusb_core_if_t *core_if = &ifxhcd->core_if;
++ struct usb_hub_descriptor *desc;
++ hprt0_data_t hprt0 = {.d32 = 0};
++
++ uint32_t port_status;
++
++ switch (_typeReq)
++ {
++ case ClearHubFeature:
++ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++ "ClearHubFeature 0x%x\n", _wValue);
++ switch (_wValue)
++ {
++ case C_HUB_LOCAL_POWER:
++ case C_HUB_OVER_CURRENT:
++ /* Nothing required here */
++ break;
++ default:
++ retval = -EINVAL;
++ IFX_ERROR ("IFXUSB HCD - "
++ "ClearHubFeature request %xh unknown\n", _wValue);
++ }
++ break;
++ case ClearPortFeature:
++ if (!_wIndex || _wIndex > 1)
++ goto error;
++
++ switch (_wValue)
++ {
++ case USB_PORT_FEAT_ENABLE:
++ IFX_DEBUGPL (DBG_ANY, "IFXUSB HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_ENABLE\n");
++ hprt0.d32 = ifxusb_read_hprt0 (core_if);
++ hprt0.b.prtena = 1;
++ ifxusb_wreg(core_if->hprt0, hprt0.d32);
++ break;
++ case USB_PORT_FEAT_SUSPEND:
++ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
++ hprt0.d32 = ifxusb_read_hprt0 (core_if);
++ hprt0.b.prtres = 1;
++ ifxusb_wreg(core_if->hprt0, hprt0.d32);
++ /* Clear Resume bit */
++ mdelay (100);
++ hprt0.b.prtres = 0;
++ ifxusb_wreg(core_if->hprt0, hprt0.d32);
++ break;
++ case USB_PORT_FEAT_POWER:
++ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_POWER\n");
++ #ifdef __IS_DUAL__
++ ifxusb_vbus_off(core_if);
++ #else
++ ifxusb_vbus_off(core_if);
++ #endif
++ hprt0.d32 = ifxusb_read_hprt0 (core_if);
++ hprt0.b.prtpwr = 0;
++ ifxusb_wreg(core_if->hprt0, hprt0.d32);
++ break;
++ case USB_PORT_FEAT_INDICATOR:
++ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
++ /* Port inidicator not supported */
++ break;
++ case USB_PORT_FEAT_C_CONNECTION:
++ /* Clears drivers internal connect status change
++ * flag */
++ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
++ ifxhcd->flags.b.port_connect_status_change = 0;
++ break;
++ case USB_PORT_FEAT_C_RESET:
++ /* Clears the driver's internal Port Reset Change
++ * flag */
++ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_C_RESET\n");
++ ifxhcd->flags.b.port_reset_change = 0;
++ break;
++ case USB_PORT_FEAT_C_ENABLE:
++ /* Clears the driver's internal Port
++ * Enable/Disable Change flag */
++ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
++ ifxhcd->flags.b.port_enable_change = 0;
++ break;
++ case USB_PORT_FEAT_C_SUSPEND:
++ /* Clears the driver's internal Port Suspend
++ * Change flag, which is set when resume signaling on
++ * the host port is complete */
++ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
++ ifxhcd->flags.b.port_suspend_change = 0;
++ break;
++ case USB_PORT_FEAT_C_OVER_CURRENT:
++ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++ "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
++ ifxhcd->flags.b.port_over_current_change = 0;
++ break;
++ default:
++ retval = -EINVAL;
++ IFX_ERROR ("IFXUSB HCD - "
++ "ClearPortFeature request %xh "
++ "unknown or unsupported\n", _wValue);
++ }
++ break;
++ case GetHubDescriptor:
++ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++ "GetHubDescriptor\n");
++ desc = (struct usb_hub_descriptor *)_buf;
++ desc->bDescLength = 9;
++ desc->bDescriptorType = 0x29;
++ desc->bNbrPorts = 1;
++ desc->wHubCharacteristics = 0x08;
++ desc->bPwrOn2PwrGood = 1;
++ desc->bHubContrCurrent = 0;
++// desc->bitmap[0] = 0;
++// desc->bitmap[1] = 0xff;
++ break;
++ case GetHubStatus:
++ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++ "GetHubStatus\n");
++ memset (_buf, 0, 4);
++ break;
++ case GetPortStatus:
++ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++ "GetPortStatus\n");
++ if (!_wIndex || _wIndex > 1)
++ goto error;
++
++# ifdef CONFIG_AVM_POWERMETER
++ {
++ /* first port only, but 2 Hosts */
++ static unsigned char ucOldPower1 = 255;
++ static unsigned char ucOldPower2 = 255;
++
++ unsigned char ucNewPower = 0;
++ struct usb_device *childdev = _syshcd->self.root_hub->children[0];
++
++ if (childdev != NULL) {
++ ucNewPower = (childdev->actconfig != NULL)
++ ? childdev->actconfig->desc.bMaxPower
++ : 50;/* default: 50 means 100 mA*/
++ }
++ if (_syshcd->self.busnum == 1) {
++ if (ucOldPower1 != ucNewPower) {
++ ucOldPower1 = ucNewPower;
++ printk (KERN_INFO "IFXHCD#1: AVM Powermeter changed to %u mA\n", ucNewPower*2);
++ PowerManagmentRessourceInfo(powerdevice_usb_host, ucNewPower*2);
++ }
++ } else {
++ if (ucOldPower2 != ucNewPower) {
++ ucOldPower2 = ucNewPower;
++ printk (KERN_INFO "IFXHCD#2: AVM Powermeter changed to %u mA\n", ucNewPower*2);
++ PowerManagmentRessourceInfo(powerdevice_usb_host2, ucNewPower*2);
++ }
++ }
++ }
++# endif /*--- #ifdef CONFIG_AVM_POWERMETER ---*/
++
++ port_status = 0;
++ if (ifxhcd->flags.b.port_connect_status_change)
++ port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
++ if (ifxhcd->flags.b.port_enable_change)
++ port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
++ if (ifxhcd->flags.b.port_suspend_change)
++ port_status |= (1 << USB_PORT_FEAT_C_SUSPEND);
++ if (ifxhcd->flags.b.port_reset_change)
++ port_status |= (1 << USB_PORT_FEAT_C_RESET);
++ if (ifxhcd->flags.b.port_over_current_change)
++ {
++ IFX_ERROR("Device Not Supported\n");
++ port_status |= (1 << USB_PORT_FEAT_C_OVER_CURRENT);
++ }
++ if (!ifxhcd->flags.b.port_connect_status)
++ {
++ /*
++ * The port is disconnected, which means the core is
++ * either in device mode or it soon will be. Just
++ * return 0's for the remainder of the port status
++ * since the port register can't be read if the core
++ * is in device mode.
++ */
++ *((u32 *) _buf) = cpu_to_le32(port_status);
++ break;
++ }
++
++ hprt0.d32 = ifxusb_rreg(core_if->hprt0);
++ IFX_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hprt0.d32);
++ if (hprt0.b.prtconnsts)
++ port_status |= (1 << USB_PORT_FEAT_CONNECTION);
++ if (hprt0.b.prtena)
++ port_status |= (1 << USB_PORT_FEAT_ENABLE);
++ if (hprt0.b.prtsusp)
++ port_status |= (1 << USB_PORT_FEAT_SUSPEND);
++ if (hprt0.b.prtovrcurract)
++ port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
++ if (hprt0.b.prtrst)
++ port_status |= (1 << USB_PORT_FEAT_RESET);
++ if (hprt0.b.prtpwr)
++ port_status |= (1 << USB_PORT_FEAT_POWER);
++/* if (hprt0.b.prtspd == IFXUSB_HPRT0_PRTSPD_HIGH_SPEED)
++ port_status |= (1 << USB_PORT_FEAT_HIGHSPEED);
++ else if (hprt0.b.prtspd == IFXUSB_HPRT0_PRTSPD_LOW_SPEED)
++ port_status |= (1 << USB_PORT_FEAT_LOWSPEED);*/
++ if (hprt0.b.prttstctl)
++ port_status |= (1 << USB_PORT_FEAT_TEST);
++ /* USB_PORT_FEAT_INDICATOR unsupported always 0 */
++ *((u32 *) _buf) = cpu_to_le32(port_status);
++ break;
++ case SetHubFeature:
++ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++ "SetHubFeature\n");
++ /* No HUB features supported */
++ break;
++ case SetPortFeature:
++ if (_wValue != USB_PORT_FEAT_TEST && (!_wIndex || _wIndex > 1))
++ goto error;
++ /*
++ * The port is disconnected, which means the core is
++ * either in device mode or it soon will be. Just
++ * return without doing anything since the port
++ * register can't be written if the core is in device
++ * mode.
++ */
++ if (!ifxhcd->flags.b.port_connect_status)
++ break;
++ switch (_wValue)
++ {
++ case USB_PORT_FEAT_SUSPEND:
++ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++ "SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
++ hprt0.d32 = ifxusb_read_hprt0 (core_if);
++ hprt0.b.prtsusp = 1;
++ ifxusb_wreg(core_if->hprt0, hprt0.d32);
++ //IFX_PRINT( "SUSPEND: HPRT0=%0x\n", hprt0.d32);
++ /* Suspend the Phy Clock */
++ {
++ pcgcctl_data_t pcgcctl = {.d32=0};
++ pcgcctl.b.stoppclk = 1;
++ ifxusb_wreg(core_if->pcgcctl, pcgcctl.d32);
++ }
++ break;
++ case USB_PORT_FEAT_POWER:
++ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++ "SetPortFeature - USB_PORT_FEAT_POWER\n");
++ ifxusb_vbus_on (core_if);
++ hprt0.d32 = ifxusb_read_hprt0 (core_if);
++ hprt0.b.prtpwr = 1;
++ ifxusb_wreg(core_if->hprt0, hprt0.d32);
++ break;
++ case USB_PORT_FEAT_RESET:
++ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++ "SetPortFeature - USB_PORT_FEAT_RESET\n");
++ hprt0.d32 = ifxusb_read_hprt0 (core_if);
++ hprt0.b.prtrst = 1;
++ ifxusb_wreg(core_if->hprt0, hprt0.d32);
++ /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
++ MDELAY (60);
++ hprt0.b.prtrst = 0;
++ ifxusb_wreg(core_if->hprt0, hprt0.d32);
++ break;
++ #ifdef __WITH_HS_ELECT_TST__
++ case USB_PORT_FEAT_TEST:
++ {
++ uint32_t t;
++ gint_data_t gintmsk;
++ t = (_wIndex >> 8); /* MSB wIndex USB */
++ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++ "SetPortFeature - USB_PORT_FEAT_TEST %d\n", t);
++ warn("USB_PORT_FEAT_TEST %d\n", t);
++ if (t < 6)
++ {
++ hprt0.d32 = ifxusb_read_hprt0 (core_if);
++ hprt0.b.prttstctl = t;
++ ifxusb_wreg(core_if->hprt0, hprt0.d32);
++ }
++ else if (t == 6) /* HS_HOST_PORT_SUSPEND_RESUME */
++ {
++ /* Save current interrupt mask */
++ gintmsk.d32 = ifxusb_rreg(&core_if->core_global_regs->gintmsk);
++
++ /* Disable all interrupts while we muck with
++ * the hardware directly
++ */
++ ifxusb_wreg(&core_if->core_global_regs->gintmsk, 0);
++
++ /* 15 second delay per the test spec */
++ mdelay(15000);
++
++ /* Drive suspend on the root port */
++ hprt0.d32 = ifxusb_read_hprt0 (core_if);
++ hprt0.b.prtsusp = 1;
++ hprt0.b.prtres = 0;
++ ifxusb_wreg(core_if->hprt0, hprt0.d32);
++
++ /* 15 second delay per the test spec */
++ mdelay(15000);
++
++ /* Drive resume on the root port */
++ hprt0.d32 = ifxusb_read_hprt0 (core_if);
++ hprt0.b.prtsusp = 0;
++ hprt0.b.prtres = 1;
++ ifxusb_wreg(core_if->hprt0, hprt0.d32);
++ mdelay(100);
++
++ /* Clear the resume bit */
++ hprt0.b.prtres = 0;
++ ifxusb_wreg(core_if->hprt0, hprt0.d32);
++
++ /* Restore interrupts */
++ ifxusb_wreg(&core_if->core_global_regs->gintmsk, gintmsk.d32);
++ }
++ else if (t == 7) /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */
++ {
++ /* Save current interrupt mask */
++ gintmsk.d32 = ifxusb_rreg(&core_if->core_global_regs->gintmsk);
++
++ /* Disable all interrupts while we muck with
++ * the hardware directly
++ */
++ ifxusb_wreg(&core_if->core_global_regs->gintmsk, 0);
++
++ /* 15 second delay per the test spec */
++ mdelay(15000);
++
++ /* Send the Setup packet */
++ do_setup(core_if);
++
++ /* 15 second delay so nothing else happens for awhile */
++ mdelay(15000);
++
++ /* Restore interrupts */
++ ifxusb_wreg(&core_if->core_global_regs->gintmsk, gintmsk.d32);
++ }
++
++ else if (t == 8) /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */
++ {
++ /* Save current interrupt mask */
++ gintmsk.d32 = ifxusb_rreg(&core_if->core_global_regs->gintmsk);
++
++ /* Disable all interrupts while we muck with
++ * the hardware directly
++ */
++ ifxusb_wreg(&core_if->core_global_regs->gintmsk, 0);
++
++ /* Send the Setup packet */
++ do_setup(core_if);
++
++ /* 15 second delay so nothing else happens for awhile */
++ mdelay(15000);
++
++ /* Send the In and Ack packets */
++ do_in_ack(core_if);
++
++ /* 15 second delay so nothing else happens for awhile */
++ mdelay(15000);
++
++ /* Restore interrupts */
++ ifxusb_wreg(&core_if->core_global_regs->gintmsk, gintmsk.d32);
++ }
++ }
++ break;
++ #endif //__WITH_HS_ELECT_TST__
++ case USB_PORT_FEAT_INDICATOR:
++ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
++ "SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
++ /* Not supported */
++ break;
++ default:
++ retval = -EINVAL;
++ IFX_ERROR ("IFXUSB HCD - "
++ "SetPortFeature request %xh "
++ "unknown or unsupported\n", _wValue);
++ }
++ break;
++ default:
++ error:
++ retval = -EINVAL;
++ IFX_WARN ("IFXUSB HCD - "
++ "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n",
++ _typeReq, _wIndex, _wValue);
++ }
++ return retval;
++}
++
++
++/*!
++ \brief Assigns transactions from a URBD to a free host channel and initializes the
++ host channel to perform the transactions. The host channel is removed from
++ the free list.
++ \param _ifxhcd The HCD state structure.
++ \param _epqh Transactions from the first URBD for this EPQH are selected and assigned to a free host channel.
++ */
++static int assign_and_init_hc(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh)
++{
++ ifxhcd_hc_t *ifxhc;
++ ifxhcd_urbd_t *urbd;
++ struct urb *urb;
++
++ IFX_DEBUGPL(DBG_HCDV, "%s(%p,%p)\n", __func__, _ifxhcd, _epqh);
++
++ if(list_empty(&_epqh->urbd_list))
++ return 0;
++
++ ifxhc = list_entry(_ifxhcd->free_hc_list.next, ifxhcd_hc_t, hc_list_entry);
++ /* Remove the host channel from the free list. */
++ list_del_init(&ifxhc->hc_list_entry);
++
++ urbd = list_entry(_epqh->urbd_list.next, ifxhcd_urbd_t, urbd_list_entry);
++ urb = urbd->urb;
++
++ _epqh->hc = ifxhc;
++ _epqh->urbd = urbd;
++ ifxhc->epqh = _epqh;
++
++ urbd->is_active=1;
++
++ /*
++ * Use usb_pipedevice to determine device address. This address is
++ * 0 before the SET_ADDRESS command and the correct address afterward.
++ */
++ ifxhc->dev_addr = usb_pipedevice(urb->pipe);
++ ifxhc->ep_num = usb_pipeendpoint(urb->pipe);
++
++ ifxhc->xfer_started = 0;
++
++ if (urb->dev->speed == USB_SPEED_LOW) ifxhc->speed = IFXUSB_EP_SPEED_LOW;
++ else if (urb->dev->speed == USB_SPEED_FULL) ifxhc->speed = IFXUSB_EP_SPEED_FULL;
++ else ifxhc->speed = IFXUSB_EP_SPEED_HIGH;
++
++ ifxhc->mps = _epqh->mps;
++ ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
++
++ ifxhc->ep_type = _epqh->ep_type;
++
++ if(_epqh->ep_type==IFXUSB_EP_TYPE_CTRL)
++ {
++ ifxhc->control_phase=IFXHCD_CONTROL_SETUP;
++ ifxhc->is_in = 0;
++ ifxhc->data_pid_start = IFXUSB_HC_PID_SETUP;
++ ifxhc->xfer_buff = urbd->setup_buff;
++ ifxhc->xfer_len = 8;
++ ifxhc->xfer_count = 0;
++ ifxhc->short_rw =(urb->transfer_flags & URB_ZERO_PACKET)?1:0;
++ }
++ else
++ {
++ ifxhc->is_in = urbd->is_in;
++ ifxhc->xfer_buff = urbd->xfer_buff;
++ ifxhc->xfer_len = urbd->xfer_len;
++ ifxhc->xfer_count = 0;
++ /* == AVM/WK 20100710 Fix - Use toggle of usbcore ==*/
++ //ifxhc->data_pid_start = _epqh->data_toggle;
++ ifxhc->data_pid_start = usb_gettoggle (urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout (urb->pipe))
++ ? IFXUSB_HC_PID_DATA1
++ : IFXUSB_HC_PID_DATA0;
++ if(ifxhc->is_in)
++ ifxhc->short_rw =0;
++ else
++ ifxhc->short_rw =(urb->transfer_flags & URB_ZERO_PACKET)?1:0;
++
++ #ifdef __EN_ISOC__
++ if(_epqh->ep_type==IFXUSB_EP_TYPE_ISOC)
++ {
++ struct usb_iso_packet_descriptor *frame_desc;
++ frame_desc = &urb->iso_frame_desc[urbd->isoc_frame_index];
++ ifxhc->xfer_buff += frame_desc->offset + urbd->isoc_split_offset;
++ ifxhc->xfer_len = frame_desc->length - urbd->isoc_split_offset;
++ if (ifxhc->isoc_xact_pos == IFXUSB_HCSPLIT_XACTPOS_ALL)
++ {
++ if (ifxhc->xfer_len <= 188)
++ ifxhc->isoc_xact_pos = IFXUSB_HCSPLIT_XACTPOS_ALL;
++ else
++ ifxhc->isoc_xact_pos = IFXUSB_HCSPLIT_XACTPOS_BEGIN;
++ }
++ }
++ #endif
++ }
++
++ ifxhc->do_ping=0;
++ if (_ifxhcd->core_if.snpsid < 0x4f54271a && ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
++ ifxhc->do_ping=1;
++
++
++ /* Set the split attributes */
++ ifxhc->split = 0;
++ if (_epqh->need_split) {
++ ifxhc->split = 1;
++ ifxhc->hub_addr = urb->dev->tt->hub->devnum;
++ ifxhc->port_addr = urb->dev->ttport;
++ }
++
++ //ifxhc->uint16_t pkt_count_limit
++
++ {
++ hcint_data_t hc_intr_mask;
++ uint8_t hc_num = ifxhc->hc_num;
++ ifxusb_hc_regs_t *hc_regs = _ifxhcd->core_if.hc_regs[hc_num];
++
++ /* Clear old interrupt conditions for this host channel. */
++ hc_intr_mask.d32 = 0xFFFFFFFF;
++ hc_intr_mask.b.reserved = 0;
++ ifxusb_wreg(&hc_regs->hcint, hc_intr_mask.d32);
++
++ /* Enable channel interrupts required for this transfer. */
++ hc_intr_mask.d32 = 0;
++ hc_intr_mask.b.chhltd = 1;
++ hc_intr_mask.b.ahberr = 1;
++
++ ifxusb_wreg(&hc_regs->hcintmsk, hc_intr_mask.d32);
++
++ /* Enable the top level host channel interrupt. */
++ {
++ uint32_t intr_enable;
++ intr_enable = (1 << hc_num);
++ ifxusb_mreg(&_ifxhcd->core_if.host_global_regs->haintmsk, 0, intr_enable);
++ }
++
++ /* Make sure host channel interrupts are enabled. */
++ {
++ gint_data_t gintmsk ={.d32 = 0};
++ gintmsk.b.hcintr = 1;
++ ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk, 0, gintmsk.d32);
++ }
++
++ /*
++ * Program the HCCHARn register with the endpoint characteristics for
++ * the current transfer.
++ */
++ {
++ hcchar_data_t hcchar;
++
++ hcchar.d32 = 0;
++ hcchar.b.devaddr = ifxhc->dev_addr;
++ hcchar.b.epnum = ifxhc->ep_num;
++ hcchar.b.lspddev = (ifxhc->speed == IFXUSB_EP_SPEED_LOW);
++ hcchar.b.eptype = ifxhc->ep_type;
++ hcchar.b.mps = ifxhc->mps;
++ ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
++
++ IFX_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, ifxhc->hc_num);
++ IFX_DEBUGPL(DBG_HCDV, " Dev Addr: %d\n" , hcchar.b.devaddr);
++ IFX_DEBUGPL(DBG_HCDV, " Ep Num: %d\n" , hcchar.b.epnum);
++ IFX_DEBUGPL(DBG_HCDV, " Is Low Speed: %d\n", hcchar.b.lspddev);
++ IFX_DEBUGPL(DBG_HCDV, " Ep Type: %d\n" , hcchar.b.eptype);
++ IFX_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n" , hcchar.b.mps);
++ IFX_DEBUGPL(DBG_HCDV, " Multi Cnt: %d\n" , hcchar.b.multicnt);
++ }
++ /* Program the HCSPLIT register for SPLITs */
++ {
++ hcsplt_data_t hcsplt;
++
++ hcsplt.d32 = 0;
++ if (ifxhc->split)
++ {
++ IFX_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", ifxhc->hc_num,
++ (ifxhc->split==2) ? "CSPLIT" : "SSPLIT");
++ hcsplt.b.spltena = 1;
++ hcsplt.b.compsplt = (ifxhc->split==2);
++ #ifdef __EN_ISOC__
++ if(_epqh->ep_type==IFXUSB_EP_TYPE_ISOC)
++ hcsplt.b.xactpos = ifxhc->isoc_xact_pos;
++ else
++ #endif
++ hcsplt.b.xactpos = IFXUSB_HCSPLIT_XACTPOS_ALL;
++ hcsplt.b.hubaddr = ifxhc->hub_addr;
++ hcsplt.b.prtaddr = ifxhc->port_addr;
++ IFX_DEBUGPL(DBG_HCDV, " comp split %d\n" , hcsplt.b.compsplt);
++ IFX_DEBUGPL(DBG_HCDV, " xact pos %d\n" , hcsplt.b.xactpos);
++ IFX_DEBUGPL(DBG_HCDV, " hub addr %d\n" , hcsplt.b.hubaddr);
++ IFX_DEBUGPL(DBG_HCDV, " port addr %d\n" , hcsplt.b.prtaddr);
++ IFX_DEBUGPL(DBG_HCDV, " is_in %d\n" , ifxhc->is_in);
++ IFX_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n" , ifxhc->mps);
++ IFX_DEBUGPL(DBG_HCDV, " xferlen: %d\n" , ifxhc->xfer_len);
++ }
++ ifxusb_wreg(&hc_regs->hcsplt, hcsplt.d32);
++ }
++ }
++
++ ifxhc->nak_retry_r=ifxhc->nak_retry=0;
++ ifxhc->nak_countdown_r=ifxhc->nak_countdown=0;
++
++ if (ifxhc->split)
++ {
++ if(ifxhc->is_in)
++ {
++ }
++ else
++ {
++ }
++ }
++ else if(_epqh->ep_type==IFXUSB_EP_TYPE_CTRL)
++ {
++ if(ifxhc->is_in)
++ {
++ }
++ else
++ {
++ }
++ }
++ else if(_epqh->ep_type==IFXUSB_EP_TYPE_BULK)
++ {
++ if(ifxhc->is_in)
++ {
++// ifxhc->nak_retry_r=ifxhc->nak_retry=nak_retry_max;
++// ifxhc->nak_countdown_r=ifxhc->nak_countdown=nak_countdown_max;
++ }
++ else
++ {
++ }
++ }
++ else if(_epqh->ep_type==IFXUSB_EP_TYPE_INTR)
++ {
++ if(ifxhc->is_in)
++ {
++ }
++ else
++ {
++ }
++ }
++ else if(_epqh->ep_type==IFXUSB_EP_TYPE_ISOC)
++ {
++ if(ifxhc->is_in)
++ {
++ }
++ else
++ {
++ }
++ }
++
++ return 1;
++}
++
++/*!
++ \brief This function selects transactions from the HCD transfer schedule and
++ assigns them to available host channels. It is called from HCD interrupt
++ handler functions.
++ */
++static void select_eps_sub(ifxhcd_hcd_t *_ifxhcd)
++{
++ struct list_head *epqh_ptr;
++ struct list_head *urbd_ptr;
++ ifxhcd_epqh_t *epqh;
++ ifxhcd_urbd_t *urbd;
++ int ret_val=0;
++
++ /*== AVM/BC 20101111 Function called with Lock ==*/
++
++// #ifdef __DEBUG__
++// IFX_DEBUGPL(DBG_HCD, " ifxhcd_select_ep\n");
++// #endif
++
++ /* Process entries in the periodic ready list. */
++ #ifdef __EN_ISOC__
++ epqh_ptr = _ifxhcd->epqh_isoc_ready.next;
++ while (epqh_ptr != &_ifxhcd->epqh_isoc_ready && !list_empty(&_ifxhcd->free_hc_list))
++ {
++ epqh = list_entry(epqh_ptr, ifxhcd_epqh_t, epqh_list_entry);
++ epqh_ptr = epqh_ptr->next;
++ if(epqh->period_do)
++ {
++ if(assign_and_init_hc(_ifxhcd, epqh))
++ {
++ IFX_DEBUGPL(DBG_HCD, " select_eps ISOC\n");
++ list_move_tail(&epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_active);
++ epqh->is_active=1;
++ ret_val=1;
++ epqh->period_do=0;
++ }
++ }
++ }
++ #endif
++
++ epqh_ptr = _ifxhcd->epqh_intr_ready.next;
++ while (epqh_ptr != &_ifxhcd->epqh_intr_ready && !list_empty(&_ifxhcd->free_hc_list))
++ {
++ epqh = list_entry(epqh_ptr, ifxhcd_epqh_t, epqh_list_entry);
++ epqh_ptr = epqh_ptr->next;
++ if(epqh->period_do)
++ {
++ if(assign_and_init_hc(_ifxhcd, epqh))
++ {
++ IFX_DEBUGPL(DBG_HCD, " select_eps INTR\n");
++ list_move_tail(&epqh->epqh_list_entry, &_ifxhcd->epqh_intr_active);
++ epqh->is_active=1;
++ ret_val=1;
++ epqh->period_do=0;
++ }
++ }
++ }
++
++ epqh_ptr = _ifxhcd->epqh_np_ready.next;
++ while (epqh_ptr != &_ifxhcd->epqh_np_ready && !list_empty(&_ifxhcd->free_hc_list)) // may need to preserve at lease one for period
++ {
++ epqh = list_entry(epqh_ptr, ifxhcd_epqh_t, epqh_list_entry);
++ epqh_ptr = epqh_ptr->next;
++ if(assign_and_init_hc(_ifxhcd, epqh))
++ {
++ IFX_DEBUGPL(DBG_HCD, " select_eps CTRL/BULK\n");
++ list_move_tail(&epqh->epqh_list_entry, &_ifxhcd->epqh_np_active);
++ epqh->is_active=1;
++ ret_val=1;
++ }
++ }
++ if(ret_val)
++ /*== AVM/BC 20101111 Function called with Lock ==*/
++ process_channels_sub(_ifxhcd);
++
++ /* AVM/BC 20101111 Urbds completion loop */
++ while (!list_empty(&_ifxhcd->urbd_complete_list))
++ {
++ urbd_ptr = _ifxhcd->urbd_complete_list.next;
++ list_del_init(urbd_ptr);
++
++ urbd = list_entry(urbd_ptr, ifxhcd_urbd_t, urbd_list_entry);
++
++ ifxhcd_complete_urb(_ifxhcd, urbd, urbd->status);
++
++ }
++
++}
++
++static void select_eps_func(unsigned long data)
++{
++ unsigned long flags;
++
++ ifxhcd_hcd_t *ifxhcd;
++ ifxhcd=((ifxhcd_hcd_t *)data);
++
++ /* AVM/BC 20101111 select_eps_in_use flag removed */
++
++ SPIN_LOCK_IRQSAVE(&ifxhcd->lock, flags);
++
++ /*if(ifxhcd->select_eps_in_use){
++ SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
++ return;
++ }
++ ifxhcd->select_eps_in_use=1;
++ */
++
++ select_eps_sub(ifxhcd);
++
++ //ifxhcd->select_eps_in_use=0;
++
++ SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
++}
++
++void select_eps(ifxhcd_hcd_t *_ifxhcd)
++{
++ if(in_irq())
++ {
++ if(!_ifxhcd->select_eps.func)
++ {
++ _ifxhcd->select_eps.next = NULL;
++ _ifxhcd->select_eps.state = 0;
++ atomic_set( &_ifxhcd->select_eps.count, 0);
++ _ifxhcd->select_eps.func = select_eps_func;
++ _ifxhcd->select_eps.data = (unsigned long)_ifxhcd;
++ }
++ tasklet_schedule(&_ifxhcd->select_eps);
++ }
++ else
++ {
++ unsigned long flags;
++
++ /* AVM/BC 20101111 select_eps_in_use flag removed */
++
++ SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
++
++ /*if(_ifxhcd->select_eps_in_use){
++ printk ("select_eps non_irq: busy\n");
++ SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
++ return;
++ }
++ _ifxhcd->select_eps_in_use=1;
++ */
++
++ select_eps_sub(_ifxhcd);
++
++ //_ifxhcd->select_eps_in_use=0;
++
++ SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
++ }
++}
++
++/*!
++ \brief
++ */
++static void process_unaligned( ifxhcd_epqh_t *_epqh)
++{
++ #if defined(__UNALIGNED_BUFFER_ADJ__)
++ if(!_epqh->aligned_checked)
++ {
++ uint32_t xfer_len;
++ xfer_len=_epqh->urbd->xfer_len;
++ if(_epqh->urbd->is_in && xfer_len<_epqh->mps)
++ xfer_len = _epqh->mps;
++ _epqh->using_aligned_buf=0;
++
++ if(xfer_len > 0 && ((unsigned long)_epqh->urbd->xfer_buff) & 3)
++ {
++ if( _epqh->aligned_buf
++ && _epqh->aligned_buf_len > 0
++ && _epqh->aligned_buf_len < xfer_len
++ )
++ {
++ ifxusb_free_buf(_epqh->aligned_buf);
++ _epqh->aligned_buf=NULL;
++ _epqh->aligned_buf_len=0;
++ }
++ if(! _epqh->aligned_buf || ! _epqh->aligned_buf_len)
++ {
++ _epqh->aligned_buf = ifxusb_alloc_buf(xfer_len, _epqh->urbd->is_in);
++ if(_epqh->aligned_buf)
++ _epqh->aligned_buf_len = xfer_len;
++ }
++ if(_epqh->aligned_buf)
++ {
++ if(!_epqh->urbd->is_in)
++ memcpy(_epqh->aligned_buf, _epqh->urbd->xfer_buff, xfer_len);
++ _epqh->using_aligned_buf=1;
++ _epqh->hc->xfer_buff = _epqh->aligned_buf;
++ }
++ else
++ IFX_WARN("%s():%d\n",__func__,__LINE__);
++ }
++ if(_epqh->ep_type==IFXUSB_EP_TYPE_CTRL)
++ {
++ _epqh->using_aligned_setup=0;
++ if(((unsigned long)_epqh->urbd->setup_buff) & 3)
++ {
++ if(! _epqh->aligned_setup)
++ _epqh->aligned_setup = ifxusb_alloc_buf(8,0);
++ if(_epqh->aligned_setup)
++ {
++ memcpy(_epqh->aligned_setup, _epqh->urbd->setup_buff, 8);
++ _epqh->using_aligned_setup=1;
++ }
++ else
++ IFX_WARN("%s():%d\n",__func__,__LINE__);
++ _epqh->hc->xfer_buff = _epqh->aligned_setup;
++ }
++ }
++ }
++ #elif defined(__UNALIGNED_BUFFER_CHK__)
++ if(!_epqh->aligned_checked)
++ {
++ if(_epqh->urbd->is_in)
++ {
++ if(_epqh->urbd->xfer_len==0)
++ IFX_WARN("%s():%d IN xfer while length is zero \n",__func__,__LINE__);
++ else{
++ if(_epqh->urbd->xfer_len < _epqh->mps)
++ IFX_WARN("%s():%d IN xfer while length < mps \n",__func__,__LINE__);
++
++ if(((unsigned long)_epqh->urbd->xfer_buff) & 3)
++ IFX_WARN("%s():%d IN xfer Buffer UNALIGNED\n",__func__,__LINE__);
++ }
++ }
++ else
++ {
++ if(_epqh->urbd->xfer_len > 0 && (((unsigned long)_epqh->urbd->xfer_buff) & 3) )
++ IFX_WARN("%s():%d OUT xfer Buffer UNALIGNED\n",__func__,__LINE__);
++ }
++
++ if(_epqh->ep_type==IFXUSB_EP_TYPE_CTRL)
++ {
++ if(((unsigned long)_epqh->urbd->setup_buff) & 3)
++ IFX_WARN("%s():%d SETUP xfer Buffer UNALIGNED\n",__func__,__LINE__);
++ }
++ }
++ #endif
++ _epqh->aligned_checked=1;
++}
++
++
++/*!
++ \brief
++ */
++void process_channels_sub(ifxhcd_hcd_t *_ifxhcd)
++{
++ ifxhcd_epqh_t *epqh;
++ struct list_head *epqh_item;
++ struct ifxhcd_hc *hc;
++
++ #ifdef __EN_ISOC__
++ if (!list_empty(&_ifxhcd->epqh_isoc_active))
++ {
++ for (epqh_item = _ifxhcd->epqh_isoc_active.next;
++ epqh_item != &_ifxhcd->epqh_isoc_active;
++ )
++ {
++ epqh = list_entry(epqh_item, ifxhcd_epqh_t, epqh_list_entry);
++ epqh_item = epqh_item->next;
++ hc=epqh->hc;
++ if(hc && !hc->xfer_started && epqh->period_do)
++ {
++ if(hc->split==0
++ || hc->split==1
++ )
++ {
++ //epqh->ping_state = 0;
++ process_unaligned(epqh);
++ hc->wait_for_sof=epqh->wait_for_sof;
++ epqh->wait_for_sof=0;
++ ifxhcd_hc_start(&_ifxhcd->core_if, hc);
++ epqh->period_do=0;
++ {
++ gint_data_t gintsts = {.d32 = 0};
++ gintsts.b.sofintr = 1;
++ ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk,0, gintsts.d32);
++ }
++ }
++ }
++ }
++ }
++ #endif
++
++ if (!list_empty(&_ifxhcd->epqh_intr_active))
++ {
++ for (epqh_item = _ifxhcd->epqh_intr_active.next;
++ epqh_item != &_ifxhcd->epqh_intr_active;
++ )
++ {
++ epqh = list_entry(epqh_item, ifxhcd_epqh_t, epqh_list_entry);
++ epqh_item = epqh_item->next;
++ hc=epqh->hc;
++ if(hc && !hc->xfer_started && epqh->period_do)
++ {
++ if(hc->split==0
++ || hc->split==1
++ )
++ {
++ //epqh->ping_state = 0;
++ process_unaligned(epqh);
++ hc->wait_for_sof=epqh->wait_for_sof;
++ epqh->wait_for_sof=0;
++ ifxhcd_hc_start(&_ifxhcd->core_if, hc);
++ epqh->period_do=0;
++#ifdef __USE_TIMER_4_SOF__
++ /* AVM/WK change: let hc_start decide, if irq is needed */
++#else
++ {
++ gint_data_t gintsts = {.d32 = 0};
++ gintsts.b.sofintr = 1;
++ ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk,0, gintsts.d32);
++ }
++#endif
++ }
++ }
++
++ }
++ }
++
++ if (!list_empty(&_ifxhcd->epqh_np_active))
++ {
++ for (epqh_item = _ifxhcd->epqh_np_active.next;
++ epqh_item != &_ifxhcd->epqh_np_active;
++ )
++ {
++ epqh = list_entry(epqh_item, ifxhcd_epqh_t, epqh_list_entry);
++ epqh_item = epqh_item->next;
++ hc=epqh->hc;
++ if(hc)
++ {
++ if(!hc->xfer_started)
++ {
++ if(hc->split==0
++ || hc->split==1
++ //|| hc->split_counter == 0
++ )
++ {
++ //epqh->ping_state = 0;
++ process_unaligned(epqh);
++ hc->wait_for_sof=epqh->wait_for_sof;
++ epqh->wait_for_sof=0;
++ ifxhcd_hc_start(&_ifxhcd->core_if, hc);
++ }
++ }
++ }
++ }
++ }
++}
++
++void process_channels(ifxhcd_hcd_t *_ifxhcd)
++{
++ unsigned long flags;
++
++ /* AVM/WK Fix: use spin_lock instead busy flag
++ **/
++ SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
++
++ //if(_ifxhcd->process_channels_in_use)
++ // return;
++ //_ifxhcd->process_channels_in_use=1;
++
++ process_channels_sub(_ifxhcd);
++ //_ifxhcd->process_channels_in_use=0;
++ SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
++}
++
++
++#ifdef __HC_XFER_TIMEOUT__
++ static void hc_xfer_timeout(unsigned long _ptr)
++ {
++ hc_xfer_info_t *xfer_info = (hc_xfer_info_t *)_ptr;
++ int hc_num = xfer_info->hc->hc_num;
++ IFX_WARN("%s: timeout on channel %d\n", __func__, hc_num);
++ IFX_WARN(" start_hcchar_val 0x%08x\n", xfer_info->hc->start_hcchar_val);
++ }
++#endif
++
++void ifxhcd_hc_dumb_rx(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc,uint8_t *dump_buf)
++{
++ ifxusb_hc_regs_t *hc_regs = _core_if->hc_regs[_ifxhc->hc_num];
++ hctsiz_data_t hctsiz= { .d32=0 };
++ hcchar_data_t hcchar;
++
++
++ _ifxhc->xfer_len = _ifxhc->mps;
++ hctsiz.b.xfersize = _ifxhc->mps;
++ hctsiz.b.pktcnt = 0;
++ hctsiz.b.pid = _ifxhc->data_pid_start;
++ ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32);
++
++ ifxusb_wreg(&hc_regs->hcdma, (uint32_t)(CPHYSADDR( ((uint32_t)(dump_buf)))));
++
++ {
++ hcint_data_t hcint= { .d32=0 };
++// hcint.b.nak =1;
++// hcint.b.nyet=1;
++// hcint.b.ack =1;
++ hcint.d32 =0xFFFFFFFF;
++ ifxusb_wreg(&hc_regs->hcint, hcint.d32);
++ }
++
++ /* Set host channel enable after all other setup is complete. */
++ hcchar.b.chen = 1;
++ hcchar.b.chdis = 0;
++ hcchar.b.epdir = 1;
++ IFX_DEBUGPL(DBG_HCDV, " HCCHART: 0x%08x\n", hcchar.d32);
++ ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
++}
++
++/*!
++ \brief This function trigger a data transfer for a host channel and
++ starts the transfer.
++
++ For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
++ register along with a packet count of 1 and the channel is enabled. This
++ causes a single PING transaction to occur. Other fields in HCTSIZ are
++ simply set to 0 since no data transfer occurs in this case.
++
++ For a PING transfer in DMA mode, the HCTSIZ register is initialized with
++ all the information required to perform the subsequent data transfer. In
++ addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
++ controller performs the entire PING protocol, then starts the data
++ transfer.
++ \param _core_if Pointer of core_if structure
++ \param _ifxhc Information needed to initialize the host channel. The xfer_len
++ value may be reduced to accommodate the max widths of the XferSize and
++ PktCnt fields in the HCTSIZn register. The multi_count value may be changed
++ to reflect the final xfer_len value.
++ */
++void ifxhcd_hc_start(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc)
++{
++ hctsiz_data_t hctsiz= { .d32=0 };
++ hcchar_data_t hcchar;
++ uint32_t max_hc_xfer_size = _core_if->params.max_transfer_size;
++ uint16_t max_hc_pkt_count = _core_if->params.max_packet_count;
++ ifxusb_hc_regs_t *hc_regs = _core_if->hc_regs[_ifxhc->hc_num];
++ hfnum_data_t hfnum;
++
++ hctsiz.b.dopng = 0;
++// if(_ifxhc->do_ping && !_ifxhc->is_in) hctsiz.b.dopng = 1;
++
++ _ifxhc->nak_countdown=_ifxhc->nak_countdown_r;
++
++ /* AVM/BC 20101111 Workaround: Always PING if HI-Speed Out and xfer_len > 0 */
++ if(/*_ifxhc->do_ping &&*/
++ (!_ifxhc->is_in) &&
++ (_ifxhc->speed == IFXUSB_EP_SPEED_HIGH) &&
++ ((_ifxhc->ep_type == IFXUSB_EP_TYPE_BULK) || ((_ifxhc->ep_type == IFXUSB_EP_TYPE_CTRL) && (_ifxhc->control_phase != IFXHCD_CONTROL_SETUP))) &&
++ _ifxhc->xfer_len
++ )
++ hctsiz.b.dopng = 1;
++
++ _ifxhc->xfer_started = 1;
++
++ if(_ifxhc->epqh->pkt_count_limit > 0 && _ifxhc->epqh->pkt_count_limit < max_hc_pkt_count )
++ {
++ max_hc_pkt_count=_ifxhc->epqh->pkt_count_limit;
++ if(max_hc_pkt_count * _ifxhc->mps < max_hc_xfer_size)
++ max_hc_xfer_size = max_hc_pkt_count * _ifxhc->mps;
++ }
++ if (_ifxhc->split > 0)
++ {
++ {
++ gint_data_t gintsts = {.d32 = 0};
++ gintsts.b.sofintr = 1;
++ ifxusb_mreg(&_core_if->core_global_regs->gintmsk,0, gintsts.d32);
++ }
++
++ _ifxhc->start_pkt_count = 1;
++ if(!_ifxhc->is_in && _ifxhc->split>1) // OUT CSPLIT
++ _ifxhc->xfer_len = 0;
++ if (_ifxhc->xfer_len > _ifxhc->mps)
++ _ifxhc->xfer_len = _ifxhc->mps;
++ if (_ifxhc->xfer_len > 188)
++ _ifxhc->xfer_len = 188;
++ }
++ else if(_ifxhc->is_in)
++ {
++ _ifxhc->short_rw = 0;
++ if (_ifxhc->xfer_len > 0)
++ {
++ if (_ifxhc->xfer_len > max_hc_xfer_size)
++ _ifxhc->xfer_len = max_hc_xfer_size - _ifxhc->mps + 1;
++ _ifxhc->start_pkt_count = (_ifxhc->xfer_len + _ifxhc->mps - 1) / _ifxhc->mps;
++ if (_ifxhc->start_pkt_count > max_hc_pkt_count)
++ _ifxhc->start_pkt_count = max_hc_pkt_count;
++ }
++ else /* Need 1 packet for transfer length of 0. */
++ _ifxhc->start_pkt_count = 1;
++ _ifxhc->xfer_len = _ifxhc->start_pkt_count * _ifxhc->mps;
++ }
++ else //non-split out
++ {
++ if (_ifxhc->xfer_len == 0)
++ {
++ /*== AVM/BC WK 20110421 ZERO PACKET Workaround: Is not an error ==*/
++ //if(_ifxhc->short_rw==0)
++ // printk(KERN_INFO "%s() line %d: ZLP write without short_rw set!\n",__func__,__LINE__);
++ _ifxhc->start_pkt_count = 1;
++ }
++ else
++ {
++ if (_ifxhc->xfer_len > max_hc_xfer_size)
++ {
++ _ifxhc->start_pkt_count = (max_hc_xfer_size / _ifxhc->mps);
++ _ifxhc->xfer_len = _ifxhc->start_pkt_count * _ifxhc->mps;
++ }
++ else
++ {
++ _ifxhc->start_pkt_count = (_ifxhc->xfer_len+_ifxhc->mps-1) / _ifxhc->mps;
++// if(_ifxhc->start_pkt_count * _ifxhc->mps == _ifxhc->xfer_len )
++// _ifxhc->start_pkt_count += _ifxhc->short_rw;
++ /*== AVM/BC WK 20110421 ZERO PACKET Workaround / check if short_rw is needed ==*/
++ if(_ifxhc->start_pkt_count * _ifxhc->mps != _ifxhc->xfer_len )
++ _ifxhc->short_rw = 0;
++ }
++ }
++ }
++
++ #ifdef __EN_ISOC__
++ if (_ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC)
++ {
++ /* Set up the initial PID for the transfer. */
++ #if 1
++ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
++ #else
++ if (_ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
++ {
++ if (_ifxhc->is_in)
++ {
++ if (_ifxhc->multi_count == 1)
++ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
++ else if (_ifxhc->multi_count == 2)
++ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
++ else
++ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA2;
++ }
++ else
++ {
++ if (_ifxhc->multi_count == 1)
++ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
++ else
++ _ifxhc->data_pid_start = IFXUSB_HC_PID_MDATA;
++ }
++ }
++ else
++ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
++ #endif
++ }
++ #endif
++
++ hctsiz.b.xfersize = _ifxhc->xfer_len;
++ hctsiz.b.pktcnt = _ifxhc->start_pkt_count;
++ hctsiz.b.pid = _ifxhc->data_pid_start;
++
++ ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32);
++
++
++ IFX_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _ifxhc->hc_num);
++ IFX_DEBUGPL(DBG_HCDV, " Xfer Size: %d\n", hctsiz.b.xfersize);
++ IFX_DEBUGPL(DBG_HCDV, " Num Pkts: %d\n" , hctsiz.b.pktcnt);
++ IFX_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid);
++ IFX_DEBUGPL(DBG_HCDV, " DMA: 0x%08x\n", (uint32_t)(CPHYSADDR( ((uint32_t)(_ifxhc->xfer_buff))+ _ifxhc->xfer_count )));
++ ifxusb_wreg(&hc_regs->hcdma, (uint32_t)(CPHYSADDR( ((uint32_t)(_ifxhc->xfer_buff))+ _ifxhc->xfer_count )));
++
++ /* Start the split */
++ if (_ifxhc->split>0)
++ {
++ hcsplt_data_t hcsplt;
++ hcsplt.d32 = ifxusb_rreg (&hc_regs->hcsplt);
++ hcsplt.b.spltena = 1;
++ if (_ifxhc->split>1)
++ hcsplt.b.compsplt = 1;
++ else
++ hcsplt.b.compsplt = 0;
++
++ #ifdef __EN_ISOC__
++ if (_ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC)
++ hcsplt.b.xactpos = _ifxhc->isoc_xact_pos;
++ else
++ #endif
++ hcsplt.b.xactpos = IFXUSB_HCSPLIT_XACTPOS_ALL;// if not ISO
++ ifxusb_wreg(&hc_regs->hcsplt, hcsplt.d32);
++ IFX_DEBUGPL(DBG_HCDV, " SPLIT: XACT_POS:0x%08x\n", hcsplt.d32);
++ }
++
++ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++// hcchar.b.multicnt = _ifxhc->multi_count;
++ hcchar.b.multicnt = 1;
++
++ #ifdef __DEBUG__
++ _ifxhc->start_hcchar_val = hcchar.d32;
++ if (hcchar.b.chdis)
++ IFX_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
++ __func__, _ifxhc->hc_num, hcchar.d32);
++ #endif
++
++ /* Set host channel enable after all other setup is complete. */
++ hcchar.b.chen = 1;
++ hcchar.b.chdis = 0;
++ hcchar.b.epdir = _ifxhc->is_in;
++ _ifxhc->hcchar=hcchar.d32;
++
++ IFX_DEBUGPL(DBG_HCDV, " HCCHART: 0x%08x\n", _ifxhc->hcchar);
++
++ /* == 20110901 AVM/WK Fix: Clear IRQ flags in any case ==*/
++ {
++ hcint_data_t hcint= { .d32=0 };
++ hcint.d32 =0xFFFFFFFF;
++ ifxusb_wreg(&hc_regs->hcint, hcint.d32);
++ }
++
++ if(_ifxhc->wait_for_sof==0)
++ {
++ hcint_data_t hcint;
++
++ hcint.d32=ifxusb_rreg(&hc_regs->hcintmsk);
++
++ hcint.b.nak =0;
++ hcint.b.ack =0;
++ /* == 20110901 AVM/WK Fix: We don't need NOT YET IRQ ==*/
++ hcint.b.nyet=0;
++ if(_ifxhc->nak_countdown_r)
++ hcint.b.nak =1;
++ ifxusb_wreg(&hc_regs->hcintmsk, hcint.d32);
++
++ /* AVM WK / BC 20100827
++ * MOVED. Oddframe updated inmediatly before write HCChar Register.
++ */
++ if (_ifxhc->ep_type == IFXUSB_EP_TYPE_INTR || _ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC)
++ {
++ hfnum.d32 = ifxusb_rreg(&_core_if->host_global_regs->hfnum);
++ /* 1 if _next_ frame is odd, 0 if it's even */
++ hcchar.b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
++ _ifxhc->hcchar=hcchar.d32;
++ }
++
++ ifxusb_wreg(&hc_regs->hcchar, _ifxhc->hcchar);
++#ifdef __USE_TIMER_4_SOF__
++ } else {
++ //activate SOF IRQ
++ gint_data_t gintsts = {.d32 = 0};
++ gintsts.b.sofintr = 1;
++ ifxusb_mreg(&_core_if->core_global_regs->gintmsk,0, gintsts.d32);
++#endif
++ }
++
++ #ifdef __HC_XFER_TIMEOUT__
++ /* Start a timer for this transfer. */
++ init_timer(&_ifxhc->hc_xfer_timer);
++ _ifxhc->hc_xfer_timer.function = hc_xfer_timeout;
++ _ifxhc->hc_xfer_timer.core_if = _core_if;
++ _ifxhc->hc_xfer_timer.hc = _ifxhc;
++ _ifxhc->hc_xfer_timer.data = (unsigned long)(&_ifxhc->hc_xfer_info);
++ _ifxhc->hc_xfer_timer.expires = jiffies + (HZ*10);
++ add_timer(&_ifxhc->hc_xfer_timer);
++ #endif
++}
++
++/*!
++ \brief Attempts to halt a host channel. This function should only be called
++ to abort a transfer in DMA mode. Under normal circumstances in DMA mode, the
++ controller halts the channel when the transfer is complete or a condition
++ occurs that requires application intervention.
++
++ In DMA mode, always sets the Channel Enable and Channel Disable bits of the
++ HCCHARn register. The controller ensures there is space in the request
++ queue before submitting the halt request.
++
++ Some time may elapse before the core flushes any posted requests for this
++ host channel and halts. The Channel Halted interrupt handler completes the
++ deactivation of the host channel.
++ */
++void ifxhcd_hc_halt(ifxusb_core_if_t *_core_if,
++ ifxhcd_hc_t *_ifxhc,
++ ifxhcd_halt_status_e _halt_status)
++{
++ hcchar_data_t hcchar;
++ ifxusb_hc_regs_t *hc_regs;
++
++ hc_regs = _core_if->hc_regs[_ifxhc->hc_num];
++
++ WARN_ON(_halt_status == HC_XFER_NO_HALT_STATUS);
++
++ if (_halt_status == HC_XFER_URB_DEQUEUE ||
++ _halt_status == HC_XFER_AHB_ERR)
++ {
++ /*
++ * Disable all channel interrupts except Ch Halted. The URBD
++ * and EPQH state associated with this transfer has been cleared
++ * (in the case of URB_DEQUEUE), so the channel needs to be
++ * shut down carefully to prevent crashes.
++ */
++ hcint_data_t hcintmsk;
++ hcintmsk.d32 = 0;
++ hcintmsk.b.chhltd = 1;
++ ifxusb_wreg(&hc_regs->hcintmsk, hcintmsk.d32);
++
++ /*
++ * Make sure no other interrupts besides halt are currently
++ * pending. Handling another interrupt could cause a crash due
++ * to the URBD and EPQH state.
++ */
++ ifxusb_wreg(&hc_regs->hcint, ~hcintmsk.d32);
++
++ /*
++ * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
++ * even if the channel was already halted for some other
++ * reason.
++ */
++ _ifxhc->halt_status = _halt_status;
++
++ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++ if (hcchar.b.chen == 0)
++ {
++ /*
++ * The channel is either already halted or it hasn't
++ * started yet. In DMA mode, the transfer may halt if
++ * it finishes normally or a condition occurs that
++ * requires driver intervention. Don't want to halt
++ * the channel again. In either Slave or DMA mode,
++ * it's possible that the transfer has been assigned
++ * to a channel, but not started yet when an URB is
++ * dequeued. Don't want to halt a channel that hasn't
++ * started yet.
++ */
++ return;
++ }
++ }
++
++ if (_ifxhc->halting)
++ {
++ /*
++ * A halt has already been issued for this channel. This might
++ * happen when a transfer is aborted by a higher level in
++ * the stack.
++ */
++ #ifdef __DEBUG__
++ IFX_PRINT("*** %s: Channel %d, _hc->halting already set ***\n",
++ __func__, _ifxhc->hc_num);
++ #endif
++ //ifxusb_dump_global_registers(_core_if); */
++ //ifxusb_dump_host_registers(_core_if); */
++ return;
++ }
++ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++ /* == AVM/WK 20100709 halt channel only if enabled ==*/
++ if (hcchar.b.chen) {
++ _ifxhc->halting = 1;
++ hcchar.b.chdis = 1;
++
++ ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
++ _ifxhc->halt_status = _halt_status;
++ }
++
++ IFX_DEBUGPL(DBG_HCDV, "%s: Channel %d\n" , __func__, _ifxhc->hc_num);
++ IFX_DEBUGPL(DBG_HCDV, " hcchar: 0x%08x\n" , hcchar.d32);
++ IFX_DEBUGPL(DBG_HCDV, " halting: %d\n" , _ifxhc->halting);
++ IFX_DEBUGPL(DBG_HCDV, " halt_status: %d\n" , _ifxhc->halt_status);
++
++ return;
++}
++
++/*!
++ \brief Clears a host channel.
++ */
++void ifxhcd_hc_cleanup(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc)
++{
++ ifxusb_hc_regs_t *hc_regs;
++
++ _ifxhc->xfer_started = 0;
++ /*
++ * Clear channel interrupt enables and any unhandled channel interrupt
++ * conditions.
++ */
++ hc_regs = _core_if->hc_regs[_ifxhc->hc_num];
++ ifxusb_wreg(&hc_regs->hcintmsk, 0);
++ ifxusb_wreg(&hc_regs->hcint, 0xFFFFFFFF);
++
++ #ifdef __HC_XFER_TIMEOUT__
++ del_timer(&_ifxhc->hc_xfer_timer);
++ #endif
++ #ifdef __DEBUG__
++ {
++ hcchar_data_t hcchar;
++ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++ if (hcchar.b.chdis)
++ IFX_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", __func__, _ifxhc->hc_num, hcchar.d32);
++ }
++ #endif
++}
++
++
++
++
++
++
++
++
++#ifdef __DEBUG__
++ static void dump_urb_info(struct urb *_urb, char* _fn_name)
++ {
++ IFX_PRINT("%s, urb %p\n" , _fn_name, _urb);
++ IFX_PRINT(" Device address: %d\n", usb_pipedevice(_urb->pipe));
++ IFX_PRINT(" Endpoint: %d, %s\n" , usb_pipeendpoint(_urb->pipe),
++ (usb_pipein(_urb->pipe) ? "IN" : "OUT"));
++ IFX_PRINT(" Endpoint type: %s\n",
++ ({ char *pipetype;
++ switch (usb_pipetype(_urb->pipe)) {
++ case PIPE_CONTROL: pipetype = "CONTROL"; break;
++ case PIPE_BULK: pipetype = "BULK"; break;
++ case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
++ case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
++ default: pipetype = "UNKNOWN"; break;
++ };
++ pipetype;
++ }));
++ IFX_PRINT(" Speed: %s\n",
++ ({ char *speed;
++ switch (_urb->dev->speed) {
++ case USB_SPEED_HIGH: speed = "HIGH"; break;
++ case USB_SPEED_FULL: speed = "FULL"; break;
++ case USB_SPEED_LOW: speed = "LOW"; break;
++ default: speed = "UNKNOWN"; break;
++ };
++ speed;
++ }));
++ IFX_PRINT(" Max packet size: %d\n",
++ usb_maxpacket(_urb->dev, _urb->pipe, usb_pipeout(_urb->pipe)));
++ IFX_PRINT(" Data buffer length: %d\n", _urb->transfer_buffer_length);
++ IFX_PRINT(" Transfer buffer: %p, Transfer DMA: %p\n",
++ _urb->transfer_buffer, (void *)_urb->transfer_dma);
++ IFX_PRINT(" Setup buffer: %p, Setup DMA: %p\n",
++ _urb->setup_packet, (void *)_urb->setup_dma);
++ IFX_PRINT(" Interval: %d\n", _urb->interval);
++ if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS)
++ {
++ int i;
++ for (i = 0; i < _urb->number_of_packets; i++)
++ {
++ IFX_PRINT(" ISO Desc %d:\n", i);
++ IFX_PRINT(" offset: %d, length %d\n",
++ _urb->iso_frame_desc[i].offset,
++ _urb->iso_frame_desc[i].length);
++ }
++ }
++ }
++
++ static void dump_channel_info(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh)
++ {
++ if (_epqh->hc != NULL)
++ {
++ ifxhcd_hc_t *hc = _epqh->hc;
++ struct list_head *item;
++ ifxhcd_epqh_t *epqh_item;
++
++ ifxusb_hc_regs_t *hc_regs;
++
++ hcchar_data_t hcchar;
++ hcsplt_data_t hcsplt;
++ hctsiz_data_t hctsiz;
++ uint32_t hcdma;
++
++ hc_regs = _ifxhcd->core_if.hc_regs[hc->hc_num];
++ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++ hcsplt.d32 = ifxusb_rreg(&hc_regs->hcsplt);
++ hctsiz.d32 = ifxusb_rreg(&hc_regs->hctsiz);
++ hcdma = ifxusb_rreg(&hc_regs->hcdma);
++
++ IFX_PRINT(" Assigned to channel %d:\n" , hc->hc_num);
++ IFX_PRINT(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
++ IFX_PRINT(" hctsiz 0x%08x, hcdma 0x%08x\n" , hctsiz.d32, hcdma);
++ IFX_PRINT(" dev_addr: %d, ep_num: %d, is_in: %d\n",
++ hc->dev_addr, hc->ep_num, hc->is_in);
++ IFX_PRINT(" ep_type: %d\n" , hc->ep_type);
++ IFX_PRINT(" max_packet_size: %d\n", hc->mps);
++ IFX_PRINT(" data_pid_start: %d\n" , hc->data_pid_start);
++ IFX_PRINT(" xfer_started: %d\n" , hc->xfer_started);
++ IFX_PRINT(" halt_status: %d\n" , hc->halt_status);
++ IFX_PRINT(" xfer_buff: %p\n" , hc->xfer_buff);
++ IFX_PRINT(" xfer_len: %d\n" , hc->xfer_len);
++ IFX_PRINT(" epqh: %p\n" , hc->epqh);
++ IFX_PRINT(" NP Active:\n");
++ list_for_each(item, &_ifxhcd->epqh_np_active)
++ {
++ epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
++ IFX_PRINT(" %p\n", epqh_item);
++ }
++ IFX_PRINT(" NP Ready:\n");
++ list_for_each(item, &_ifxhcd->epqh_np_ready)
++ {
++ epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
++ IFX_PRINT(" %p\n", epqh_item);
++ }
++ IFX_PRINT(" INTR Active:\n");
++ list_for_each(item, &_ifxhcd->epqh_intr_active)
++ {
++ epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
++ IFX_PRINT(" %p\n", epqh_item);
++ }
++ IFX_PRINT(" INTR Ready:\n");
++ list_for_each(item, &_ifxhcd->epqh_intr_ready)
++ {
++ epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
++ IFX_PRINT(" %p\n", epqh_item);
++ }
++ #ifdef __EN_ISOC__
++ IFX_PRINT(" ISOC Active:\n");
++ list_for_each(item, &_ifxhcd->epqh_isoc_active)
++ {
++ epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
++ IFX_PRINT(" %p\n", epqh_item);
++ }
++ IFX_PRINT(" ISOC Ready:\n");
++ list_for_each(item, &_ifxhcd->epqh_isoc_ready)
++ {
++ epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
++ IFX_PRINT(" %p\n", epqh_item);
++ }
++ #endif
++ IFX_PRINT(" Standby:\n");
++ list_for_each(item, &_ifxhcd->epqh_stdby)
++ {
++ epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
++ IFX_PRINT(" %p\n", epqh_item);
++ }
++ }
++ }
++#endif //__DEBUG__
++
++
++/*!
++ \brief This function writes a packet into the Tx FIFO associated with the Host
++ Channel. For a channel associated with a non-periodic EP, the non-periodic
++ Tx FIFO is written. For a channel associated with a periodic EP, the
++ periodic Tx FIFO is written. This function should only be called in Slave
++ mode.
++
++ Upon return the xfer_buff and xfer_count fields in _hc are incremented by
++ then number of bytes written to the Tx FIFO.
++ */
++
++#ifdef __ENABLE_DUMP__
++ void ifxhcd_dump_state(ifxhcd_hcd_t *_ifxhcd)
++ {
++ int num_channels;
++ int i;
++ num_channels = _ifxhcd->core_if.params.host_channels;
++ IFX_PRINT("\n");
++ IFX_PRINT("************************************************************\n");
++ IFX_PRINT("HCD State:\n");
++ IFX_PRINT(" Num channels: %d\n", num_channels);
++ for (i = 0; i < num_channels; i++) {
++ ifxhcd_hc_t *hc = &_ifxhcd->ifxhc[i];
++ IFX_PRINT(" Channel %d:\n", hc->hc_num);
++ IFX_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
++ hc->dev_addr, hc->ep_num, hc->is_in);
++ IFX_PRINT(" speed: %d\n" , hc->speed);
++ IFX_PRINT(" ep_type: %d\n" , hc->ep_type);
++ IFX_PRINT(" mps: %d\n", hc->mps);
++ IFX_PRINT(" data_pid_start: %d\n" , hc->data_pid_start);
++ IFX_PRINT(" xfer_started: %d\n" , hc->xfer_started);
++ IFX_PRINT(" xfer_buff: %p\n" , hc->xfer_buff);
++ IFX_PRINT(" xfer_len: %d\n" , hc->xfer_len);
++ IFX_PRINT(" xfer_count: %d\n" , hc->xfer_count);
++ IFX_PRINT(" halting: %d\n" , hc->halting);
++ IFX_PRINT(" halt_status: %d\n" , hc->halt_status);
++ IFX_PRINT(" split: %d\n" , hc->split);
++ IFX_PRINT(" hub_addr: %d\n" , hc->hub_addr);
++ IFX_PRINT(" port_addr: %d\n" , hc->port_addr);
++ #ifdef __EN_ISOC__
++ IFX_PRINT(" isoc_xact_pos: %d\n" , hc->isoc_xact_pos);
++ #endif
++ IFX_PRINT(" epqh: %p\n" , hc->epqh);
++ IFX_PRINT(" short_rw: %d\n" , hc->short_rw);
++ IFX_PRINT(" do_ping: %d\n" , hc->do_ping);
++ IFX_PRINT(" control_phase: %d\n" , hc->control_phase);
++ IFX_PRINT(" pkt_count_limit: %d\n", hc->epqh->pkt_count_limit);
++ IFX_PRINT(" start_pkt_count: %d\n" , hc->start_pkt_count);
++ }
++ IFX_PRINT("************************************************************\n");
++ IFX_PRINT("\n");
++ }
++#endif //__ENABLE_DUMP__
++
+diff --git a/drivers/usb/ifxhcd/ifxhcd.h b/drivers/usb/ifxhcd/ifxhcd.h
+new file mode 100644
+index 0000000..3a40851
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxhcd.h
+@@ -0,0 +1,628 @@
++/*****************************************************************************
++ ** FILE NAME : ifxhcd.h
++ ** PROJECT : IFX USB sub-system V3
++ ** MODULES : IFX USB sub-system Host and Device driver
++ ** SRC VERSION : 1.0
++ ** DATE : 1/Jan/2009
++ ** AUTHOR : Chen, Howard
++ ** DESCRIPTION : This file contains the structures, constants, and interfaces for
++ ** the Host Contoller Driver (HCD).
++ **
++ ** The Host Controller Driver (HCD) is responsible for translating requests
++ ** from the USB Driver into the appropriate actions on the IFXUSB controller.
++ ** It isolates the USBD from the specifics of the controller by providing an
++ ** API to the USBD.
++ ** FUNCTIONS :
++ ** COMPILER : gcc
++ ** REFERENCE : Synopsys DWC-OTG Driver 2.7
++ ** COPYRIGHT :
++ ** Version Control Section **
++ ** $Author$
++ ** $Date$
++ ** $Revisions$
++ ** $Log$ Revision history
++*****************************************************************************/
++
++/*!
++ \defgroup IFXUSB_HCD HCD Interface
++ \ingroup IFXUSB_DRIVER_V3
++ \brief The Host Controller Driver (HCD) is responsible for translating requests
++ from the USB Driver into the appropriate actions on the IFXUSB controller.
++ It isolates the USBD from the specifics of the controller by providing an
++ API to the USBD.
++ */
++
++
++/*!
++ \file ifxhcd.h
++ \ingroup IFXUSB_DRIVER_V3
++ \brief This file contains the structures, constants, and interfaces for
++ the Host Contoller Driver (HCD).
++ */
++
++#if !defined(__IFXHCD_H__)
++#define __IFXHCD_H__
++
++#include <linux/list.h>
++#include <linux/usb.h>
++
++#ifdef __USE_TIMER_4_SOF__
++#include <linux/hrtimer.h>
++#endif
++#include <linux/usb/hcd.h>
++
++#include "ifxusb_cif.h"
++#include "ifxusb_plat.h"
++
++
++
++/*!
++ \addtogroup IFXUSB_HCD
++ */
++/*@{*/
++
++/* Phases for control transfers.*/
++typedef enum ifxhcd_control_phase {
++ IFXHCD_CONTROL_SETUP,
++ IFXHCD_CONTROL_DATA,
++ IFXHCD_CONTROL_STATUS
++} ifxhcd_control_phase_e;
++
++/* Reasons for halting a host channel. */
++typedef enum ifxhcd_halt_status
++{
++ HC_XFER_NO_HALT_STATUS, // Initial
++ HC_XFER_COMPLETE, // Xact complete without error, upward
++ HC_XFER_URB_COMPLETE, // Xfer complete without error, short upward
++ HC_XFER_STALL, // HC stopped abnormally, upward/downward
++ HC_XFER_XACT_ERR, // HC stopped abnormally, upward
++ HC_XFER_FRAME_OVERRUN, // HC stopped abnormally, upward
++ HC_XFER_BABBLE_ERR, // HC stopped abnormally, upward
++ HC_XFER_AHB_ERR, // HC stopped abnormally, upward
++ HC_XFER_DATA_TOGGLE_ERR,
++ HC_XFER_URB_DEQUEUE, // HC stopper manually, downward
++ HC_XFER_NAK // HC stopped by nak monitor, downward
++} ifxhcd_halt_status_e;
++
++struct ifxhcd_urbd;
++struct ifxhcd_hc ;
++struct ifxhcd_epqh ;
++struct ifxhcd_hcd;
++
++/*!
++ \brief A URB Descriptor (URBD) holds the state of a bulk, control,
++ interrupt, or isochronous transfer. A single URBD is created for each URB
++ (of one of these types) submitted to the HCD. The transfer associated with
++ a URBD may require one or multiple transactions.
++
++ A URBD is linked to a EP Queue Head, which is entered in either the
++ isoc, intr or non-periodic schedule for execution. When a URBD is chosen for
++ execution, some or all of its transactions may be executed. After
++ execution, the state of the URBD is updated. The URBD may be retired if all
++ its transactions are complete or if an error occurred. Otherwise, it
++ remains in the schedule so more transactions can be executed later.
++ */
++typedef struct ifxhcd_urbd {
++ struct list_head urbd_list_entry; // Hook for EPQH->urbd_list and ifxhcd->urbd_complete_list
++ struct urb *urb; /*!< URB for this transfer */
++ //struct urb {
++ // struct list_head urb_list;
++ // struct list_head anchor_list;
++ // struct usb_anchor * anchor;
++ // struct usb_device * dev;
++ // struct usb_host_endpoint * ep;
++ // unsigned int pipe;
++ // int status;
++ // unsigned int transfer_flags;
++ // void * transfer_buffer;
++ // dma_addr_t transfer_dma;
++ // u32 transfer_buffer_length;
++ // u32 actual_length;
++ // unsigned char * setup_packet;
++ // dma_addr_t setup_dma;
++ // int start_frame;
++ // int number_of_packets;
++ // int interval;
++ // int error_count;
++ // void * context;
++ // usb_complete_t complete;
++ // struct usb_iso_packet_descriptor iso_frame_desc[0];
++ //};
++ //urb_list For use by current owner of the URB.
++ //anchor_list membership in the list of an anchor
++ //anchor to anchor URBs to a common mooring
++ //dev Identifies the USB device to perform the request.
++ //ep Points to the endpoint's data structure. Will
++ // eventually replace pipe.
++ //pipe Holds endpoint number, direction, type, and more.
++ // Create these values with the eight macros available; u
++ // sb_{snd,rcv}TYPEpipe(dev,endpoint), where the TYPE is
++ // "ctrl", "bulk", "int" or "iso". For example
++ // usb_sndbulkpipe or usb_rcvintpipe. Endpoint numbers
++ // range from zero to fifteen. Note that "in" endpoint two
++ // is a different endpoint (and pipe) from "out" endpoint
++ // two. The current configuration controls the existence,
++ // type, and maximum packet size of any given endpoint.
++ //status This is read in non-iso completion functions to get
++ // the status of the particular request. ISO requests
++ // only use it to tell whether the URB was unlinked;
++ // detailed status for each frame is in the fields of
++ // the iso_frame-desc.
++ //transfer_flags A variety of flags may be used to affect how URB
++ // submission, unlinking, or operation are handled.
++ // Different kinds of URB can use different flags.
++ // URB_SHORT_NOT_OK
++ // URB_ISO_ASAP
++ // URB_NO_TRANSFER_DMA_MAP
++ // URB_NO_SETUP_DMA_MAP
++ // URB_NO_FSBR
++ // URB_ZERO_PACKET
++ // URB_NO_INTERRUPT
++ //transfer_buffer This identifies the buffer to (or from) which the I/O
++ // request will be performed (unless URB_NO_TRANSFER_DMA_MAP
++ // is set). This buffer must be suitable for DMA; allocate it
++ // with kmalloc or equivalent. For transfers to "in"
++ // endpoints, contents of this buffer will be modified. This
++ // buffer is used for the data stage of control transfers.
++ //transfer_dma When transfer_flags includes URB_NO_TRANSFER_DMA_MAP, the
++ // device driver is saying that it provided this DMA address,
++ // which the host controller driver should use in preference
++ // to the transfer_buffer.
++ //transfer_buffer_length How big is transfer_buffer. The transfer may be broken
++ // up into chunks according to the current maximum packet size
++ // for the endpoint, which is a function of the configuration
++ // and is encoded in the pipe. When the length is zero, neither
++ // transfer_buffer nor transfer_dma is used.
++ //actual_length This is read in non-iso completion functions, and it tells
++ // how many bytes (out of transfer_buffer_length) were transferred.
++ // It will normally be the same as requested, unless either an error
++ // was reported or a short read was performed. The URB_SHORT_NOT_OK
++ // transfer flag may be used to make such short reads be reported
++ // as errors.
++ //setup_packet Only used for control transfers, this points to eight bytes of
++ // setup data. Control transfers always start by sending this data
++ // to the device. Then transfer_buffer is read or written, if needed.
++ //setup_dma For control transfers with URB_NO_SETUP_DMA_MAP set, the device
++ // driver has provided this DMA address for the setup packet. The
++ // host controller driver should use this in preference to setup_packet.
++ //start_frame Returns the initial frame for isochronous transfers.
++ //number_of_packets Lists the number of ISO transfer buffers.
++ //interval Specifies the polling interval for interrupt or isochronous transfers.
++ // The units are frames (milliseconds) for for full and low speed devices,
++ // and microframes (1/8 millisecond) for highspeed ones.
++ //error_count Returns the number of ISO transfers that reported errors.
++ //context For use in completion functions. This normally points to request-specific
++ // driver context.
++ //complete Completion handler. This URB is passed as the parameter to the completion
++ // function. The completion function may then do what it likes with the URB,
++ // including resubmitting or freeing it.
++ //iso_frame_desc[0] Used to provide arrays of ISO transfer buffers and to collect the transfer
++ // status for each buffer.
++
++ struct ifxhcd_epqh *epqh;
++ // Actual data portion, not SETUP or STATUS in case of CTRL XFER
++ // DMA adjusted
++ uint8_t *setup_buff; /*!< Pointer to the entire transfer buffer. (CPU accessable)*/
++ uint8_t *xfer_buff; /*!< Pointer to the entire transfer buffer. (CPU accessable)*/
++ uint32_t xfer_len; /*!< Total number of bytes to transfer in this xfer. */
++ unsigned is_in :1;
++ unsigned is_active:1;
++
++ // For ALL XFER
++ uint8_t error_count; /*!< Holds the number of bus errors that have occurred for a transaction
++ within this transfer.
++ */
++ /*== AVM/BC 20101111 Needed for URB Complete List ==*/
++ int status;
++ // For ISOC XFER only
++ #ifdef __EN_ISOC__
++ int isoc_frame_index; /*!< Index of the next frame descriptor for an isochronous transfer. A
++ frame descriptor describes the buffer position and length of the
++ data to be transferred in the next scheduled (micro)frame of an
++ isochronous transfer. It also holds status for that transaction.
++ The frame index starts at 0.
++ */
++ // For SPLITed ISOC XFER only
++ uint8_t isoc_split_pos; /*!< Position of the ISOC split on full/low speed */
++ uint16_t isoc_split_offset;/*!< Position of the ISOC split in the buffer for the current frame */
++ #endif
++} ifxhcd_urbd_t;
++
++/*!
++ \brief A EP Queue Head (EPQH) holds the static characteristics of an endpoint and
++ maintains a list of transfers (URBDs) for that endpoint. A EPQH structure may
++ be entered in either the isoc, intr or non-periodic schedule.
++ */
++
++typedef struct ifxhcd_epqh {
++ struct list_head epqh_list_entry; // Hook for EP Queues
++ struct list_head urbd_list; /*!< List of URBDs for this EPQH. */
++ struct ifxhcd_hc *hc; /*!< Host channel currently processing transfers for this EPQH. */
++ struct ifxhcd_urbd *urbd; /*!< URBD currently assigned to a host channel for this EPQH. */
++ struct usb_host_endpoint *sysep;
++ uint8_t ep_type; /*!< Endpoint type. One of the following values:
++ - IFXUSB_EP_TYPE_CTRL
++ - IFXUSB_EP_TYPE_ISOC
++ - IFXUSB_EP_TYPE_BULK
++ - IFXUSB_EP_TYPE_INTR
++ */
++ uint16_t mps; /*!< wMaxPacketSize Field of Endpoint Descriptor. */
++
++ /* == AVM/WK 20100710 Fix - Use toggle of usbcore ==*/
++ /*uint8_t data_toggle;*/ /*!< Determines the PID of the next data packet
++ One of the following values:
++ - IFXHCD_HC_PID_DATA0
++ - IFXHCD_HC_PID_DATA1
++ */
++ uint8_t is_active;
++
++ uint8_t pkt_count_limit;
++ #ifdef __EPQD_DESTROY_TIMEOUT__
++ struct timer_list destroy_timer;
++ #endif
++
++ uint16_t wait_for_sof;
++ uint8_t need_split; /*!< Full/low speed endpoint on high-speed hub requires split. */
++ uint16_t interval; /*!< Interval between transfers in (micro)frames. (for INTR)*/
++
++ uint16_t period_counter; /*!< Interval between transfers in (micro)frames. */
++ uint8_t period_do;
++
++ uint8_t aligned_checked;
++
++ #if defined(__UNALIGNED_BUFFER_ADJ__)
++ uint8_t using_aligned_setup;
++ uint8_t *aligned_setup;
++ uint8_t using_aligned_buf;
++ uint8_t *aligned_buf;
++ unsigned aligned_buf_len : 19;
++ #endif
++
++ uint8_t *dump_buf;
++} ifxhcd_epqh_t;
++
++
++#if defined(__HC_XFER_TIMEOUT__)
++ struct ifxusb_core_if;
++ struct ifxhcd_hc;
++ typedef struct hc_xfer_info
++ {
++ struct ifxusb_core_if *core_if;
++ struct ifxhcd_hc *hc;
++ } hc_xfer_info_t;
++#endif //defined(__HC_XFER_TIMEOUT__)
++
++
++/*!
++ \brief Host channel descriptor. This structure represents the state of a single
++ host channel when acting in host mode. It contains the data items needed to
++ transfer packets to an endpoint via a host channel.
++ */
++typedef struct ifxhcd_hc
++{
++ struct list_head hc_list_entry ; // Hook to free hc
++ struct ifxhcd_epqh *epqh ; /*!< EP Queue Head for the transfer being processed by this channel. */
++
++ uint8_t hc_num ; /*!< Host channel number used for register address lookup */
++ uint8_t *xfer_buff ; /*!< Pointer to the entire transfer buffer. */
++ uint32_t xfer_count ; /*!< Number of bytes transferred so far. The offset of the begin of the buf */
++ uint32_t xfer_len ; /*!< Total number of bytes to transfer in this xfer. */
++ uint16_t start_pkt_count ; /*!< Packet count at start of transfer. Used to calculate the actual xfer size*/
++ ifxhcd_halt_status_e halt_status; /*!< Reason for halting the host channel. */
++
++ unsigned dev_addr : 7; /*!< Device to access */
++ unsigned ep_num : 4; /*!< EP to access */
++ unsigned is_in : 1; /*!< EP direction. 0: OUT, 1: IN */
++ unsigned speed : 2; /*!< EP speed. */
++ unsigned ep_type : 2; /*!< Endpoint type. */
++ unsigned mps :11; /*!< Max packet size in bytes */
++ unsigned data_pid_start : 2; /*!< PID for initial transaction. */
++ unsigned do_ping : 1; /*!< Set to 1 to indicate that a PING request should be issued on this
++ channel. If 0, process normally.
++ */
++
++ unsigned xfer_started : 1; /*!< Flag to indicate whether the transfer has been started. Set to 1 if
++ it has been started, 0 otherwise.
++ */
++ unsigned halting : 1; /*!< Set to 1 if the host channel has been halted, but the core is not
++ finished flushing queued requests. Otherwise 0.
++ */
++ unsigned short_rw : 1; /*!< When Tx, means termination needed.
++ When Rx, indicate Short Read */
++ /* Split settings for the host channel */
++ unsigned split : 2; /*!< Split: 0-Non Split, 1-SSPLIT, 2&3 CSPLIT */
++
++ /*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/
++ unsigned nyet_count;
++
++ /* nak monitor */
++ unsigned nak_retry_r : 16;
++ unsigned nak_retry : 16;
++ #define nak_retry_max 40000
++ unsigned nak_countdown : 8;
++ unsigned nak_countdown_r: 8;
++ #define nak_countdown_max 1
++
++ uint16_t wait_for_sof;
++ ifxhcd_control_phase_e control_phase; /*!< Current phase for control transfers (Setup, Data, or Status). */
++ uint32_t ssplit_out_xfer_count; /*!< How many bytes transferred during SSPLIT OUT */
++ #ifdef __DEBUG__
++ uint32_t start_hcchar_val;
++ #endif
++ #ifdef __HC_XFER_TIMEOUT__
++ hc_xfer_info_t hc_xfer_info;
++ struct timer_list hc_xfer_timer;
++ #endif
++ uint32_t hcchar;
++
++ /* Split settings for the host channel */
++ uint8_t hub_addr; /*!< Address of high speed hub */
++ uint8_t port_addr; /*!< Port of the low/full speed device */
++ #ifdef __EN_ISOC__
++ uint8_t isoc_xact_pos; /*!< Split transaction position */
++ #endif
++} ifxhcd_hc_t;
++
++
++/*!
++ \brief This structure holds the state of the HCD, including the non-periodic and
++ periodic schedules.
++ */
++typedef struct ifxhcd_hcd
++{
++ struct device *dev;
++ struct hc_driver hc_driver;
++ ifxusb_core_if_t core_if; /*!< Pointer to the core interface structure. */
++ struct usb_hcd *syshcd;
++
++ volatile union ifxhcd_internal_flags
++ {
++ uint32_t d32;
++ struct
++ {
++ unsigned port_connect_status_change : 1;
++ unsigned port_connect_status : 1;
++ unsigned port_reset_change : 1;
++ unsigned port_enable_change : 1;
++ unsigned port_suspend_change : 1;
++ unsigned port_over_current_change : 1;
++ unsigned reserved : 27;
++ } b;
++ } flags; /*!< Internal HCD Flags */
++
++ struct ifxhcd_hc ifxhc[MAX_EPS_CHANNELS]; /*!< Array of pointers to the host channel descriptors. Allows accessing
++ a host channel descriptor given the host channel number. This is
++ useful in interrupt handlers.
++ */
++ struct list_head free_hc_list; /*!< Free host channels in the controller. This is a list of ifxhcd_hc_t items. */
++ uint8_t *status_buf; /*!< Buffer to use for any data received during the status phase of a
++ control transfer. Normally no data is transferred during the status
++ phase. This buffer is used as a bit bucket.
++ */
++ #define IFXHCD_STATUS_BUF_SIZE 64
++
++ struct list_head epqh_np_active; // with URBD, with HC
++ struct list_head epqh_np_ready; // with URBD, No HC
++
++ struct list_head epqh_intr_active; // with URBD, with HC
++ struct list_head epqh_intr_ready; // with URBD, no pass, No HC
++
++ #ifdef __EN_ISOC__
++ struct list_head epqh_isoc_active; // with URBD, with HC
++ struct list_head epqh_isoc_ready; // with URBD, no pass, No HC
++ #endif
++
++ /*== AVM/BC 20101111 URB Complete List ==*/
++ struct list_head urbd_complete_list;
++
++ struct list_head epqh_stdby;
++
++ /* AVM/BC 20101111 flags removed */
++ //unsigned process_channels_in_use : 1;
++ //unsigned select_eps_in_use : 1;
++
++ struct tasklet_struct select_eps; /*!< Tasket to do a reset */
++ uint32_t lastframe;
++ spinlock_t lock;
++#ifdef __USE_TIMER_4_SOF__
++ struct hrtimer hr_timer;
++#endif
++} ifxhcd_hcd_t;
++
++/* Gets the ifxhcd_hcd from a struct usb_hcd */
++static inline ifxhcd_hcd_t *syshcd_to_ifxhcd(struct usb_hcd *syshcd)
++{
++ return (ifxhcd_hcd_t *)(syshcd->hcd_priv[0]);
++}
++
++/* Gets the struct usb_hcd that contains a ifxhcd_hcd_t. */
++static inline struct usb_hcd *ifxhcd_to_syshcd(ifxhcd_hcd_t *ifxhcd)
++{
++ return (struct usb_hcd *)(ifxhcd->syshcd);
++}
++
++/*! \brief HCD Create/Destroy Functions */
++/*@{*/
++ extern int ifxhcd_init (ifxhcd_hcd_t *_ifxhcd);
++ extern void ifxhcd_remove(ifxhcd_hcd_t *_ifxhcd);
++/*@}*/
++
++/*! \brief Linux HC Driver API Functions */
++/*@{*/
++extern int ifxhcd_start(struct usb_hcd *hcd);
++extern void ifxhcd_stop (struct usb_hcd *hcd);
++extern int ifxhcd_get_frame_number(struct usb_hcd *hcd);
++
++
++/*!
++ \brief This function does the setup for a data transfer for a host channel and
++ starts the transfer. May be called in either Slave mode or DMA mode. In
++ Slave mode, the caller must ensure that there is sufficient space in the
++ request queue and Tx Data FIFO.
++
++ For an OUT transfer in Slave mode, it loads a data packet into the
++ appropriate FIFO. If necessary, additional data packets will be loaded in
++ the Host ISR.
++
++ For an IN transfer in Slave mode, a data packet is requested. The data
++ packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
++ additional data packets are requested in the Host ISR.
++
++ For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
++ register along with a packet count of 1 and the channel is enabled. This
++ causes a single PING transaction to occur. Other fields in HCTSIZ are
++ simply set to 0 since no data transfer occurs in this case.
++
++ For a PING transfer in DMA mode, the HCTSIZ register is initialized with
++ all the information required to perform the subsequent data transfer. In
++ addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
++ controller performs the entire PING protocol, then starts the data
++ transfer.
++
++ @param _ifxhc Information needed to initialize the host channel. The xfer_len
++ value may be reduced to accommodate the max widths of the XferSize and
++ PktCnt fields in the HCTSIZn register. The multi_count value may be changed
++ to reflect the final xfer_len value.
++ */
++extern void ifxhcd_hc_start(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc);
++
++//extern int ifxhcd_urb_enqueue(struct usb_hcd *_syshcd, struct usb_host_endpoint *_sysep, struct urb *_urb, gfp_t mem_flags);
++//extern int ifxhcd_urb_dequeue(struct usb_hcd *_syshcd, struct urb *_urb);
++extern irqreturn_t ifxhcd_irq(struct usb_hcd *_syshcd);
++int ifxhcd_urb_enqueue( struct usb_hcd *_syshcd,
++ /*--- struct usb_host_endpoint *_sysep, Parameter im 2.6.28 entfallen ---*/
++ struct urb *_urb,
++ gfp_t _mem_flags);
++int ifxhcd_urb_dequeue( struct usb_hcd *_syshcd,
++ struct urb *_urb, int status /* Parameter neu in 2.6.28 */);
++
++extern void ifxhcd_endpoint_disable(struct usb_hcd *_syshcd, struct usb_host_endpoint *_sysep);
++
++extern int ifxhcd_hub_status_data(struct usb_hcd *_syshcd, char *_buf);
++extern int ifxhcd_hub_control( struct usb_hcd *_syshcd,
++ u16 _typeReq,
++ u16 _wValue,
++ u16 _wIndex,
++ char *_buf,
++ u16 _wLength);
++
++/*@}*/
++
++/*! \brief Transaction Execution Functions */
++/*@{*/
++extern void ifxhcd_complete_urb (ifxhcd_hcd_t *_ifxhcd, ifxhcd_urbd_t *_urbd, int _status);
++
++/*@}*/
++
++/*! \brief Deferred Transaction Execution Functions */
++/*@{*/
++
++/*== AVM/BC 20101111 URB Complete List ==*/
++extern void defer_ifxhcd_complete_urb (ifxhcd_hcd_t *_ifxhcd, ifxhcd_urbd_t *_urbd, int _status);
++
++/*!
++ \brief Clears the transfer state for a host channel. This function is normally
++ called after a transfer is done and the host channel is being released.
++ */
++extern void ifxhcd_hc_cleanup(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc);
++
++/*!
++ \brief Attempts to halt a host channel. This function should only be called in
++ Slave mode or to abort a transfer in either Slave mode or DMA mode. Under
++ normal circumstances in DMA mode, the controller halts the channel when the
++ transfer is complete or a condition occurs that requires application
++ intervention.
++
++ In slave mode, checks for a free request queue entry, then sets the Channel
++ Enable and Channel Disable bits of the Host Channel Characteristics
++ register of the specified channel to intiate the halt. If there is no free
++ request queue entry, sets only the Channel Disable bit of the HCCHARn
++ register to flush requests for this channel. In the latter case, sets a
++ flag to indicate that the host channel needs to be halted when a request
++ queue slot is open.
++
++ In DMA mode, always sets the Channel Enable and Channel Disable bits of the
++ HCCHARn register. The controller ensures there is space in the request
++ queue before submitting the halt request.
++
++ Some time may elapse before the core flushes any posted requests for this
++ host channel and halts. The Channel Halted interrupt handler completes the
++ deactivation of the host channel.
++ */
++extern void ifxhcd_hc_halt(ifxusb_core_if_t *_core_if,
++ ifxhcd_hc_t *_ifxhc,
++ ifxhcd_halt_status_e _halt_status);
++
++/*!
++ \brief Prepares a host channel for transferring packets to/from a specific
++ endpoint. The HCCHARn register is set up with the characteristics specified
++ in _ifxhc. Host channel interrupts that may need to be serviced while this
++ transfer is in progress are enabled.
++ */
++extern void ifxhcd_hc_init(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc);
++
++/*!
++ \brief This function is called to handle the disconnection of host port.
++ */
++int32_t ifxhcd_disconnect(ifxhcd_hcd_t *_ifxhcd);
++/*@}*/
++
++/*! \brief Interrupt Handler Functions */
++/*@{*/
++extern irqreturn_t ifxhcd_oc_irq(int _irq, void *_dev);
++
++extern int32_t ifxhcd_handle_oc_intr(ifxhcd_hcd_t *_ifxhcd);
++extern int32_t ifxhcd_handle_intr (ifxhcd_hcd_t *_ifxhcd);
++/*@}*/
++
++
++/*! \brief Schedule Queue Functions */
++/*@{*/
++extern ifxhcd_epqh_t *ifxhcd_epqh_create (ifxhcd_hcd_t *_ifxhcd, struct urb *_urb);
++extern void ifxhcd_epqh_free ( ifxhcd_epqh_t *_epqh);
++extern void select_eps (ifxhcd_hcd_t *_ifxhcd);
++extern void process_channels(ifxhcd_hcd_t *_ifxhcd);
++extern void process_channels_sub(ifxhcd_hcd_t *_ifxhcd);
++extern void complete_channel(ifxhcd_hcd_t *_ifxhcd, ifxhcd_hc_t *_ifxhc, ifxhcd_urbd_t *_urbd);
++extern void ifxhcd_epqh_ready(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh);
++extern void ifxhcd_epqh_active(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh);
++extern void ifxhcd_epqh_idle(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh);
++extern void ifxhcd_epqh_idle_periodic(ifxhcd_epqh_t *_epqh);
++extern int ifxhcd_urbd_create (ifxhcd_hcd_t *_ifxhcd,struct urb *_urb);
++/*@}*/
++
++/*! \brief Gets the usb_host_endpoint associated with an URB. */
++static inline struct usb_host_endpoint *ifxhcd_urb_to_endpoint(struct urb *_urb)
++{
++ struct usb_device *dev = _urb->dev;
++ int ep_num = usb_pipeendpoint(_urb->pipe);
++
++ return (usb_pipein(_urb->pipe))?(dev->ep_in[ep_num]):(dev->ep_out[ep_num]);
++}
++
++/*!
++ * \brief Gets the endpoint number from a _bEndpointAddress argument. The endpoint is
++ * qualified with its direction (possible 32 endpoints per device).
++ */
++#define ifxhcd_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \
++ ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4)
++
++
++/* AVM/WK: not needed?
++
++extern struct usb_device *usb_alloc_dev (struct usb_device *parent, struct usb_bus *, unsigned port);
++extern int usb_add_hcd (struct usb_hcd *syshcd, unsigned int irqnum, unsigned long irqflags);
++extern void usb_remove_hcd (struct usb_hcd *syshcd);
++extern struct usb_hcd *usb_create_hcd (const struct hc_driver *driver, struct device *dev, char *bus_name);
++extern void usb_hcd_giveback_urb (struct usb_hcd *syshcd, struct urb *urb);
++extern void usb_put_hcd (struct usb_hcd *syshcd);
++extern long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount);
++
++*/
++/** Internal Functions */
++void ifxhcd_dump_state(ifxhcd_hcd_t *_ifxhcd);
++extern char *syserr(int errno);
++
++/*@}*//*IFXUSB_HCD*/
++
++#endif // __IFXHCD_H__
+diff --git a/drivers/usb/ifxhcd/ifxhcd_es.c b/drivers/usb/ifxhcd/ifxhcd_es.c
+new file mode 100644
+index 0000000..ef9e8c0
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxhcd_es.c
+@@ -0,0 +1,549 @@
++/*****************************************************************************
++ ** FILE NAME : ifxhcd_es.c
++ ** PROJECT : IFX USB sub-system V3
++ ** MODULES : IFX USB sub-system Host and Device driver
++ ** SRC VERSION : 1.0
++ ** DATE : 1/Jan/2009
++ ** AUTHOR : Chen, Howard
++ ** DESCRIPTION : The file contain function to enable host mode USB-IF Electrical Test function.
++ *****************************************************************************/
++
++/*!
++ \file ifxhcd_es.c
++ \ingroup IFXUSB_DRIVER_V3
++ \brief The file contain function to enable host mode USB-IF Electrical Test function.
++*/
++
++#include <linux/version.h>
++#include "ifxusb_version.h"
++
++#include <linux/kernel.h>
++
++#include <linux/errno.h>
++
++#include <linux/dma-mapping.h>
++
++#include "ifxusb_plat.h"
++#include "ifxusb_regs.h"
++#include "ifxusb_cif.h"
++#include "ifxhcd.h"
++
++
++#ifdef __WITH_HS_ELECT_TST__
++ /*
++ * Quick and dirty hack to implement the HS Electrical Test
++ * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature.
++ *
++ * This code was copied from our userspace app "hset". It sends a
++ * Get Device Descriptor control sequence in two parts, first the
++ * Setup packet by itself, followed some time later by the In and
++ * Ack packets. Rather than trying to figure out how to add this
++ * functionality to the normal driver code, we just hijack the
++ * hardware, using these two function to drive the hardware
++ * directly.
++ */
++
++
++ void do_setup(ifxusb_core_if_t *_core_if)
++ {
++
++ ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
++ ifxusb_host_global_regs_t *hc_global_regs = _core_if->host_global_regs;
++ ifxusb_hc_regs_t *hc_regs = _core_if->hc_regs[0];
++ uint32_t *data_fifo = _core_if->data_fifo[0];
++
++ gint_data_t gintsts;
++ hctsiz_data_t hctsiz;
++ hcchar_data_t hcchar;
++ haint_data_t haint;
++ hcint_data_t hcint;
++
++
++ /* Enable HAINTs */
++ ifxusb_wreg(&hc_global_regs->haintmsk, 0x0001);
++
++ /* Enable HCINTs */
++ ifxusb_wreg(&hc_regs->hcintmsk, 0x04a3);
++
++ /* Read GINTSTS */
++ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ /* Read HAINT */
++ haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ ifxusb_wreg(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ ifxusb_wreg(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
++
++ /* Read GINTSTS */
++ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ /*
++ * Send Setup packet (Get Device Descriptor)
++ */
++
++ /* Make sure channel is disabled */
++ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++ if (hcchar.b.chen) {
++ //fprintf(stderr, "Channel already enabled 1, HCCHAR = %08x\n", hcchar.d32);
++ hcchar.b.chdis = 1;
++ // hcchar.b.chen = 1;
++ ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
++ //sleep(1);
++ mdelay(1000);
++
++ /* Read GINTSTS */
++ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ /* Read HAINT */
++ haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ ifxusb_wreg(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ ifxusb_wreg(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
++
++ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++ //if (hcchar.b.chen) {
++ // fprintf(stderr, "** Channel _still_ enabled 1, HCCHAR = %08x **\n", hcchar.d32);
++ //}
++ }
++
++ /* Set HCTSIZ */
++ hctsiz.d32 = 0;
++ hctsiz.b.xfersize = 8;
++ hctsiz.b.pktcnt = 1;
++ hctsiz.b.pid = IFXUSB_HC_PID_SETUP;
++ ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32);
++
++ /* Set HCCHAR */
++ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++ hcchar.b.eptype = IFXUSB_EP_TYPE_CTRL;
++ hcchar.b.epdir = 0;
++ hcchar.b.epnum = 0;
++ hcchar.b.mps = 8;
++ hcchar.b.chen = 1;
++ ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
++
++ /* Fill FIFO with Setup data for Get Device Descriptor */
++ ifxusb_wreg(data_fifo++, 0x01000680);
++ ifxusb_wreg(data_fifo++, 0x00080000);
++
++ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++ //fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Wait for host channel interrupt */
++ do {
++ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++ } while (gintsts.b.hcintr == 0);
++
++ //fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Disable HCINTs */
++ ifxusb_wreg(&hc_regs->hcintmsk, 0x0000);
++
++ /* Disable HAINTs */
++ ifxusb_wreg(&hc_global_regs->haintmsk, 0x0000);
++
++ /* Read HAINT */
++ haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ ifxusb_wreg(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ ifxusb_wreg(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
++
++ /* Read GINTSTS */
++ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++ }
++
++ void do_in_ack(ifxusb_core_if_t *_core_if)
++ {
++
++ ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
++ ifxusb_host_global_regs_t *hc_global_regs = _core_if->host_global_regs;
++ ifxusb_hc_regs_t *hc_regs = _core_if->hc_regs[0];
++ uint32_t *data_fifo = _core_if->data_fifo[0];
++
++ gint_data_t gintsts;
++ hctsiz_data_t hctsiz;
++ hcchar_data_t hcchar;
++ haint_data_t haint;
++ hcint_data_t hcint;
++ grxsts_data_t grxsts;
++
++ /* Enable HAINTs */
++ ifxusb_wreg(&hc_global_regs->haintmsk, 0x0001);
++
++ /* Enable HCINTs */
++ ifxusb_wreg(&hc_regs->hcintmsk, 0x04a3);
++
++ /* Read GINTSTS */
++ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ /* Read HAINT */
++ haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ ifxusb_wreg(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ ifxusb_wreg(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
++
++ /* Read GINTSTS */
++ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ /*
++ * Receive Control In packet
++ */
++
++ /* Make sure channel is disabled */
++ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++ if (hcchar.b.chen) {
++ //fprintf(stderr, "Channel already enabled 2, HCCHAR = %08x\n", hcchar.d32);
++ hcchar.b.chdis = 1;
++ hcchar.b.chen = 1;
++ ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
++ //sleep(1);
++ mdelay(1000);
++
++ /* Read GINTSTS */
++ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ /* Read HAINT */
++ haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ ifxusb_wreg(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ ifxusb_wreg(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
++
++ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++ //if (hcchar.b.chen) {
++ // fprintf(stderr, "** Channel _still_ enabled 2, HCCHAR = %08x **\n", hcchar.d32);
++ //}
++ }
++
++ /* Set HCTSIZ */
++ hctsiz.d32 = 0;
++ hctsiz.b.xfersize = 8;
++ hctsiz.b.pktcnt = 1;
++ hctsiz.b.pid = IFXUSB_HC_PID_DATA1;
++ ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32);
++
++ /* Set HCCHAR */
++ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++ hcchar.b.eptype = IFXUSB_EP_TYPE_CTRL;
++ hcchar.b.epdir = 1;
++ hcchar.b.epnum = 0;
++ hcchar.b.mps = 8;
++ hcchar.b.chen = 1;
++ ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
++
++ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++ //fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Wait for receive status queue interrupt */
++ do {
++ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++ } while (gintsts.b.rxstsqlvl == 0);
++
++ //fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Read RXSTS */
++ grxsts.d32 = ifxusb_rreg(&global_regs->grxstsp);
++ //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
++
++ /* Clear RXSTSQLVL in GINTSTS */
++ gintsts.d32 = 0;
++ gintsts.b.rxstsqlvl = 1;
++ ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
++
++ switch (grxsts.hb.pktsts) {
++ case IFXUSB_HSTS_DATA_UPDT:
++ /* Read the data into the host buffer */
++ if (grxsts.hb.bcnt > 0) {
++ int i;
++ int word_count = (grxsts.hb.bcnt + 3) / 4;
++
++ for (i = 0; i < word_count; i++) {
++ (void)ifxusb_rreg(data_fifo++);
++ }
++ }
++
++ //fprintf(stderr, "Received %u bytes\n", (unsigned)grxsts.hb.bcnt);
++ break;
++
++ default:
++ //fprintf(stderr, "** Unexpected GRXSTS packet status 1 **\n");
++ break;
++ }
++
++ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++ //fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Wait for receive status queue interrupt */
++ do {
++ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++ } while (gintsts.b.rxstsqlvl == 0);
++
++ //fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Read RXSTS */
++ grxsts.d32 = ifxusb_rreg(&global_regs->grxstsp);
++ //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
++
++ /* Clear RXSTSQLVL in GINTSTS */
++ gintsts.d32 = 0;
++ gintsts.b.rxstsqlvl = 1;
++ ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
++
++ switch (grxsts.hb.pktsts) {
++ case IFXUSB_HSTS_XFER_COMP:
++ break;
++
++ default:
++ //fprintf(stderr, "** Unexpected GRXSTS packet status 2 **\n");
++ break;
++ }
++
++ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++ //fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Wait for host channel interrupt */
++ do {
++ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++ } while (gintsts.b.hcintr == 0);
++
++ //fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Read HAINT */
++ haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ ifxusb_wreg(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ ifxusb_wreg(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
++
++ /* Read GINTSTS */
++ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ // usleep(100000);
++ // mdelay(100);
++ mdelay(1);
++
++ /*
++ * Send handshake packet
++ */
++
++ /* Read HAINT */
++ haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ ifxusb_wreg(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ ifxusb_wreg(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
++
++ /* Read GINTSTS */
++ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ /* Make sure channel is disabled */
++ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++ if (hcchar.b.chen) {
++ //fprintf(stderr, "Channel already enabled 3, HCCHAR = %08x\n", hcchar.d32);
++ hcchar.b.chdis = 1;
++ hcchar.b.chen = 1;
++ ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
++ //sleep(1);
++ mdelay(1000);
++
++ /* Read GINTSTS */
++ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++
++ /* Read HAINT */
++ haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ ifxusb_wreg(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ ifxusb_wreg(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
++
++ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++ //if (hcchar.b.chen) {
++ // fprintf(stderr, "** Channel _still_ enabled 3, HCCHAR = %08x **\n", hcchar.d32);
++ //}
++ }
++
++ /* Set HCTSIZ */
++ hctsiz.d32 = 0;
++ hctsiz.b.xfersize = 0;
++ hctsiz.b.pktcnt = 1;
++ hctsiz.b.pid = IFXUSB_HC_PID_DATA1;
++ ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32);
++
++ /* Set HCCHAR */
++ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++ hcchar.b.eptype = IFXUSB_EP_TYPE_CTRL;
++ hcchar.b.epdir = 0;
++ hcchar.b.epnum = 0;
++ hcchar.b.mps = 8;
++ hcchar.b.chen = 1;
++ ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
++
++ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++ //fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Wait for host channel interrupt */
++ do {
++ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++ } while (gintsts.b.hcintr == 0);
++
++ //fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
++
++ /* Disable HCINTs */
++ ifxusb_wreg(&hc_regs->hcintmsk, 0x0000);
++
++ /* Disable HAINTs */
++ ifxusb_wreg(&hc_global_regs->haintmsk, 0x0000);
++
++ /* Read HAINT */
++ haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
++ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
++
++ /* Read HCINT */
++ hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
++
++ /* Read HCCHAR */
++ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
++
++ /* Clear HCINT */
++ ifxusb_wreg(&hc_regs->hcint, hcint.d32);
++
++ /* Clear HAINT */
++ ifxusb_wreg(&hc_global_regs->haint, haint.d32);
++
++ /* Clear GINTSTS */
++ ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
++
++ /* Read GINTSTS */
++ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
++ }
++#endif //__WITH_HS_ELECT_TST__
++
+diff --git a/drivers/usb/ifxhcd/ifxhcd_intr.c b/drivers/usb/ifxhcd/ifxhcd_intr.c
+new file mode 100644
+index 0000000..76fe602
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxhcd_intr.c
+@@ -0,0 +1,3742 @@
++/*****************************************************************************
++ ** FILE NAME : ifxhcd_intr.c
++ ** PROJECT : IFX USB sub-system V3
++ ** MODULES : IFX USB sub-system Host and Device driver
++ ** SRC VERSION : 1.0
++ ** DATE : 1/Jan/2009
++ ** AUTHOR : Chen, Howard
++ ** DESCRIPTION : This file contains the implementation of the HCD Interrupt handlers.
++ *****************************************************************************/
++
++/*!
++ \file ifxhcd_intr.c
++ \ingroup IFXUSB_DRIVER_V3
++ \brief This file contains the implementation of the HCD Interrupt handlers.
++*/
++
++
++#include <linux/version.h>
++#include "ifxusb_version.h"
++
++#include "ifxusb_plat.h"
++#include "ifxusb_regs.h"
++#include "ifxusb_cif.h"
++
++#include "ifxhcd.h"
++
++/* AVM/WK 20100520*/
++#ifdef __EN_ISOC__
++#error AVM/WK: CONFIG_USB_HOST_IFX_WITH_ISO currently not supported!
++#endif
++
++/* Macro used to clear one channel interrupt */
++#define clear_hc_int(_hc_regs_,_intr_) \
++ do { \
++ hcint_data_t hcint_clear = {.d32 = 0}; \
++ hcint_clear.b._intr_ = 1; \
++ ifxusb_wreg(&((_hc_regs_)->hcint), hcint_clear.d32); \
++ } while (0)
++
++/*
++ * Macro used to disable one channel interrupt. Channel interrupts are
++ * disabled when the channel is halted or released by the interrupt handler.
++ * There is no need to handle further interrupts of that type until the
++ * channel is re-assigned. In fact, subsequent handling may cause crashes
++ * because the channel structures are cleaned up when the channel is released.
++ */
++#define disable_hc_int(_hc_regs_,_intr_) \
++ do { \
++ hcint_data_t hcintmsk = {.d32 = 0}; \
++ hcintmsk.b._intr_ = 1; \
++ ifxusb_mreg(&((_hc_regs_)->hcintmsk), hcintmsk.d32, 0); \
++ } while (0)
++
++#define enable_hc_int(_hc_regs_,_intr_) \
++ do { \
++ hcint_data_t hcintmsk = {.d32 = 0}; \
++ hcintmsk.b._intr_ = 1; \
++ ifxusb_mreg(&((_hc_regs_)->hcintmsk),0, hcintmsk.d32); \
++ } while (0)
++
++/*
++ * Save the starting data toggle for the next transfer. The data toggle is
++ * saved in the QH for non-control transfers and it's saved in the QTD for
++ * control transfers.
++ */
++uint8_t read_data_toggle(ifxusb_hc_regs_t *_hc_regs)
++{
++ hctsiz_data_t hctsiz;
++ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++ return(hctsiz.b.pid);
++}
++
++
++static void release_channel_dump(ifxhcd_hc_t *ifxhc,
++ struct urb *urb,
++ ifxhcd_epqh_t *epqh,
++ ifxhcd_urbd_t *urbd,
++ ifxhcd_halt_status_e halt_status)
++{
++ #ifdef __DEBUG__
++ printk(KERN_INFO);
++ switch (halt_status)
++ {
++ case HC_XFER_NO_HALT_STATUS:
++ printk("HC_XFER_NO_HALT_STATUS");break;
++ case HC_XFER_URB_COMPLETE:
++ printk("HC_XFER_URB_COMPLETE");break;
++ case HC_XFER_AHB_ERR:
++ printk("HC_XFER_AHB_ERR");break;
++ case HC_XFER_STALL:
++ printk("HC_XFER_STALL");break;
++ case HC_XFER_BABBLE_ERR:
++ printk("HC_XFER_BABBLE_ERR");break;
++ case HC_XFER_XACT_ERR:
++ printk("HC_XFER_XACT_ERR");break;
++ case HC_XFER_URB_DEQUEUE:
++ printk("HC_XFER_URB_DEQUEUE");break;
++ case HC_XFER_FRAME_OVERRUN:
++ printk("HC_XFER_FRAME_OVERRUN");break;
++ case HC_XFER_DATA_TOGGLE_ERR:
++ printk("HC_XFER_DATA_TOGGLE_ERR");break;
++ case HC_XFER_NAK:
++ printk("HC_XFER_NAK");break;
++ case HC_XFER_COMPLETE:
++ printk("HC_XFER_COMPLETE");break;
++ default:
++ printk("KNOWN");break;
++ }
++ if(ifxhc)
++ printk("Ch %d %s%s S%d " , ifxhc->hc_num
++ ,(ifxhc->ep_type == IFXUSB_EP_TYPE_CTRL)?"CTRL-":
++ ((ifxhc->ep_type == IFXUSB_EP_TYPE_BULK)?"BULK-":
++ ((ifxhc->ep_type == IFXUSB_EP_TYPE_INTR)?"INTR-":
++ ((ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC)?"ISOC-":"????"
++ )
++ )
++ )
++ ,(ifxhc->is_in)?"IN":"OUT"
++ ,(ifxhc->split)
++ );
++ else
++ printk(" [NULL HC] ");
++ printk("urb=%p epqh=%p urbd=%p\n",urb,epqh,urbd);
++
++ if(urb)
++ {
++ printk(KERN_INFO " Device address: %d\n", usb_pipedevice(urb->pipe));
++ printk(KERN_INFO " Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
++ (usb_pipein(urb->pipe) ? "IN" : "OUT"));
++ printk(KERN_INFO " Endpoint type: %s\n",
++ ({char *pipetype;
++ switch (usb_pipetype(urb->pipe)) {
++ case PIPE_CONTROL: pipetype = "CTRL"; break;
++ case PIPE_BULK: pipetype = "BULK"; break;
++ case PIPE_INTERRUPT: pipetype = "INTR"; break;
++ case PIPE_ISOCHRONOUS: pipetype = "ISOC"; break;
++ default: pipetype = "????"; break;
++ }; pipetype;}));
++ printk(KERN_INFO " Speed: %s\n",
++ ({char *speed;
++ switch (urb->dev->speed) {
++ case USB_SPEED_HIGH: speed = "HS"; break;
++ case USB_SPEED_FULL: speed = "FS"; break;
++ case USB_SPEED_LOW: speed = "LS"; break;
++ default: speed = "????"; break;
++ }; speed;}));
++ printk(KERN_INFO " Max packet size: %d\n",
++ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
++ printk(KERN_INFO " Data buffer length: %d\n", urb->transfer_buffer_length);
++ printk(KERN_INFO " Transfer buffer: %p, Transfer DMA: %p\n",
++ urb->transfer_buffer, (void *)urb->transfer_dma);
++ printk(KERN_INFO " Setup buffer: %p, Setup DMA: %p\n",
++ urb->setup_packet, (void *)urb->setup_dma);
++ printk(KERN_INFO " Interval: %d\n", urb->interval);
++ switch (urb->status)
++ {
++ case HC_XFER_NO_HALT_STATUS:
++ printk(KERN_INFO " STATUS:HC_XFER_NO_HALT_STATUS\n");break;
++ case HC_XFER_URB_COMPLETE:
++ printk(KERN_INFO " STATUS:HC_XFER_URB_COMPLETE\n");break;
++ case HC_XFER_AHB_ERR:
++ printk(KERN_INFO " STATUS:HC_XFER_AHB_ERR\n");break;
++ case HC_XFER_STALL:
++ printk(KERN_INFO " STATUS:HC_XFER_STALL\n");break;
++ case HC_XFER_BABBLE_ERR:
++ printk(KERN_INFO " STATUS:HC_XFER_BABBLE_ERR\n");break;
++ case HC_XFER_XACT_ERR:
++ printk(KERN_INFO " STATUS:HC_XFER_XACT_ERR\n");break;
++ case HC_XFER_URB_DEQUEUE:
++ printk(KERN_INFO " STATUS:HC_XFER_URB_DEQUEUE\n");break;
++ case HC_XFER_FRAME_OVERRUN:
++ printk(KERN_INFO " STATUS:HC_XFER_FRAME_OVERRUN\n");break;
++ case HC_XFER_DATA_TOGGLE_ERR:
++ printk(KERN_INFO " STATUS:HC_XFER_DATA_TOGGLE_ERR\n");break;
++ case HC_XFER_COMPLETE:
++ printk(KERN_INFO " STATUS:HC_XFER_COMPLETE\n");break;
++ default:
++ printk(KERN_INFO " STATUS:KNOWN\n");break;
++ }
++ }
++ #endif
++}
++
++
++static void release_channel(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxhcd_halt_status_e _halt_status)
++{
++ ifxusb_hc_regs_t *hc_regs = _ifxhcd->core_if.hc_regs[_ifxhc->hc_num];
++ struct urb *urb = NULL;
++ ifxhcd_epqh_t *epqh = NULL;
++ ifxhcd_urbd_t *urbd = NULL;
++
++ IFX_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status %d\n",
++ __func__, _ifxhc->hc_num, _halt_status);
++
++ epqh=_ifxhc->epqh;
++
++ if(!epqh)
++ IFX_ERROR("%s epqh=null\n",__func__);
++ else
++ {
++ urbd=epqh->urbd;
++ if(!urbd)
++ IFX_ERROR("%s urbd=null\n",__func__);
++ else
++ {
++ urb=urbd->urb;
++ if(!urb)
++ IFX_ERROR("%s urb =null\n",__func__);
++ else {
++ /* == AVM/WK 20100710 Fix - Use toggle of usbcore ==*/
++ unsigned toggle = (read_data_toggle(hc_regs) == IFXUSB_HC_PID_DATA0)? 0: 1;
++ usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), usb_pipeout(urb->pipe), toggle);
++ }
++ }
++ //epqh->data_toggle = read_data_toggle(hc_regs);
++
++ }
++
++ switch (_halt_status)
++ {
++ case HC_XFER_NO_HALT_STATUS:
++ IFX_ERROR("%s: No halt_status, channel %d\n", __func__, _ifxhc->hc_num);
++ break;
++ case HC_XFER_COMPLETE:
++ IFX_ERROR("%s: Inavalid halt_status HC_XFER_COMPLETE, channel %d\n", __func__, _ifxhc->hc_num);
++ break;
++ case HC_XFER_URB_COMPLETE:
++ case HC_XFER_URB_DEQUEUE:
++ case HC_XFER_AHB_ERR:
++ case HC_XFER_XACT_ERR:
++ case HC_XFER_FRAME_OVERRUN:
++ if(urbd && urb) {
++ /* == 20110803 AVM/WK FIX set status, if still in progress == */
++ if (urb->status == -EINPROGRESS) {
++ switch (_halt_status) {
++ case HC_XFER_URB_COMPLETE:
++ urb->status = 0;
++ break;
++ case HC_XFER_URB_DEQUEUE:
++ urb->status = -ECONNRESET;
++ break;
++ case HC_XFER_AHB_ERR:
++ case HC_XFER_XACT_ERR:
++ case HC_XFER_FRAME_OVERRUN:
++ urb->status = -EPROTO;
++ break;
++ default:
++ break;
++ }
++ }
++ /*== AVM/BC 20101111 Deferred Complete ==*/
++ defer_ifxhcd_complete_urb(_ifxhcd, urbd, urb->status);
++ }
++ else
++ {
++ IFX_WARN("WARNING %s():%d urbd=%p urb=%p\n",__func__,__LINE__,urbd,urb);
++ release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status);
++ }
++ if(epqh)
++ ifxhcd_epqh_idle(_ifxhcd, epqh);
++ else
++ {
++ IFX_WARN("WARNING %s():%d epqh=%p\n",__func__,__LINE__,epqh);
++ release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status);
++ }
++
++ list_add_tail(&_ifxhc->hc_list_entry, &_ifxhcd->free_hc_list);
++ ifxhcd_hc_cleanup(&_ifxhcd->core_if, _ifxhc);
++ break;
++ case HC_XFER_STALL:
++ release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status);
++ if(urbd)
++ /*== AVM/BC 20101111 Deferred Complete ==*/
++ defer_ifxhcd_complete_urb(_ifxhcd, urbd, -EPIPE);
++ else
++ IFX_WARN("WARNING %s():%d urbd=%p urb=%p\n",__func__,__LINE__,urbd,urb);
++ if(epqh)
++ {
++// epqh->data_toggle = 0;
++ ifxhcd_epqh_idle(_ifxhcd, epqh);
++ }
++ else
++ IFX_WARN("WARNING %s():%d epqh=%p\n",__func__,__LINE__,epqh);
++ list_add_tail(&_ifxhc->hc_list_entry, &_ifxhcd->free_hc_list);
++ ifxhcd_hc_cleanup(&_ifxhcd->core_if, _ifxhc);
++ break;
++ case HC_XFER_NAK:
++ release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status);
++ if(urbd)
++ {
++ //ifxhcd_complete_urb(_ifxhcd, urbd, -ETIMEDOUT);
++ urb->status = 0;
++ /*== AVM/BC 20101111 Deferred Complete ==*/
++ defer_ifxhcd_complete_urb(_ifxhcd, urbd, urb->status);
++ }
++ else
++ IFX_WARN("WARNING %s():%d urbd=%p urb=%p\n",__func__,__LINE__,urbd,urb);
++ if(epqh)
++ ifxhcd_epqh_idle(_ifxhcd, epqh);
++ else
++ IFX_WARN("WARNING %s():%d epqh=%p\n",__func__,__LINE__,epqh);
++ list_add_tail(&_ifxhc->hc_list_entry, &_ifxhcd->free_hc_list);
++ ifxhcd_hc_cleanup(&_ifxhcd->core_if, _ifxhc);
++ break;
++ case HC_XFER_BABBLE_ERR:
++ case HC_XFER_DATA_TOGGLE_ERR:
++ release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status);
++ if(urbd)
++ /*== AVM/BC 20101111 Deferred Complete ==*/
++ defer_ifxhcd_complete_urb(_ifxhcd, urbd, -EOVERFLOW);
++ else
++ IFX_WARN("WARNING %s():%d urbd=%p urb=%p\n",__func__,__LINE__,urbd,urb);
++ if(epqh)
++ ifxhcd_epqh_idle(_ifxhcd, epqh);
++ else
++ IFX_WARN("WARNING %s():%d epqh=%p\n",__func__,__LINE__,epqh);
++ list_add_tail(&_ifxhc->hc_list_entry, &_ifxhcd->free_hc_list);
++ ifxhcd_hc_cleanup(&_ifxhcd->core_if, _ifxhc);
++ break;
++ }
++ select_eps(_ifxhcd);
++}
++
++/*
++ * Updates the state of the URB after a Transfer Complete interrupt on the
++ * host channel. Updates the actual_length field of the URB based on the
++ * number of bytes transferred via the host channel. Sets the URB status
++ * if the data transfer is finished.
++ *
++ * @return 1 if the data transfer specified by the URB is completely finished,
++ * 0 otherwise.
++ */
++static int update_urb_state_xfer_comp(ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ struct urb *_urb,
++ ifxhcd_urbd_t *_urbd)
++{
++ int xfer_done = 0;
++
++ if (_ifxhc->is_in)
++ {
++ hctsiz_data_t hctsiz;
++ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++ _urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
++ if ((hctsiz.b.xfersize != 0) || (_urb->actual_length >= _urb->transfer_buffer_length))
++ {
++ xfer_done = 1;
++ _urb->status = 0;
++ /* 20110805 AVM/WK Workaround: catch overflow error here, hardware does not */
++ if (_urb->actual_length > _urb->transfer_buffer_length) {
++ _urb->status = -EOVERFLOW;
++ }
++ #if 0
++ if (_urb->actual_length < _urb->transfer_buffer_length && _urb->transfer_flags & URB_SHORT_NOT_OK)
++ _urb->status = -EREMOTEIO;
++ #endif
++ }
++
++ }
++ else
++ {
++ if (_ifxhc->split)
++ _urb->actual_length += _ifxhc->ssplit_out_xfer_count;
++ else
++ _urb->actual_length += _ifxhc->xfer_len;
++
++ if (_urb->actual_length >= _urb->transfer_buffer_length)
++ {
++ /*== AVM/BC WK 20110421 ZERO PACKET Workaround ==*/
++ if ((_ifxhc->short_rw == 1) && ( _ifxhc->xfer_len > 0) && ( _ifxhc->xfer_len % _ifxhc->mps == 0 ))
++ {
++ _ifxhc->short_rw = 0;
++ //Transfer not finished. Another iteration for ZLP.
++ }
++ else
++ {
++ xfer_done = 1;
++ }
++ _urb->status = 0;
++ }
++ }
++
++ #ifdef __DEBUG__
++ {
++ hctsiz_data_t hctsiz;
++ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++ IFX_DEBUGPL(DBG_HCDV, "IFXUSB: %s: %s, channel %d\n",
++ __func__, (_ifxhc->is_in ? "IN" : "OUT"), _ifxhc->hc_num);
++ IFX_DEBUGPL(DBG_HCDV, " hc->xfer_len %d\n", _ifxhc->xfer_len);
++ IFX_DEBUGPL(DBG_HCDV, " hctsiz.xfersize %d\n", hctsiz.b.xfersize);
++ IFX_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n",
++ _urb->transfer_buffer_length);
++ IFX_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", _urb->actual_length);
++ }
++ #endif
++ return xfer_done;
++}
++
++/*== AVM/BC 20101111 Function called with Lock ==*/
++
++void complete_channel(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxhcd_urbd_t *_urbd)
++{
++ ifxusb_hc_regs_t *hc_regs = _ifxhcd->core_if.hc_regs[_ifxhc->hc_num];
++ struct urb *urb = NULL;
++ ifxhcd_epqh_t *epqh = NULL;
++ int urb_xfer_done;
++
++ IFX_DEBUGPL(DBG_HCD, "--Complete Channel %d : \n", _ifxhc->hc_num);
++
++ if(!_urbd)
++ {
++ IFX_ERROR("ERROR %s():%d urbd=%p\n",__func__,__LINE__,_urbd);
++ return;
++ }
++
++ urb = _urbd->urb;
++ epqh = _urbd->epqh;
++
++ if(!urb || !epqh)
++ {
++ IFX_ERROR("ERROR %s():%d urb=%p epqh=%p\n",__func__,__LINE__,urb,epqh);
++ return;
++ }
++
++ _ifxhc->do_ping=0;
++
++ if (_ifxhc->split)
++ _ifxhc->split = 1;
++
++ switch (epqh->ep_type)
++ {
++ case IFXUSB_EP_TYPE_CTRL:
++ switch (_ifxhc->control_phase)
++ {
++ case IFXHCD_CONTROL_SETUP:
++ IFX_DEBUGPL(DBG_HCDV, " Control setup transaction done\n");
++ if (_urbd->xfer_len > 0)
++ {
++ _ifxhc->control_phase = IFXHCD_CONTROL_DATA;
++ _ifxhc->is_in = _urbd->is_in;
++ _ifxhc->xfer_len = _urbd->xfer_len;
++ #if defined(__UNALIGNED_BUFFER_ADJ__)
++ if(epqh->using_aligned_buf)
++ _ifxhc->xfer_buff = epqh->aligned_buf;
++ else
++ #endif
++ _ifxhc->xfer_buff = _urbd->xfer_buff;
++ }
++ else
++ {
++ _ifxhc->control_phase = IFXHCD_CONTROL_STATUS;
++ _ifxhc->is_in = 1;
++ _ifxhc->xfer_len = 0;
++ _ifxhc->xfer_buff = _ifxhcd->status_buf;
++ }
++ if(_ifxhc->is_in)
++ _ifxhc->short_rw =0;
++ else
++ _ifxhc->short_rw =(urb->transfer_flags & URB_ZERO_PACKET)?1:0;
++ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
++ _ifxhc->xfer_count = 0;
++ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
++ /*== AVM/BC 20101111 Lock not needed ==*/
++ process_channels_sub(_ifxhcd);
++ break;
++ case IFXHCD_CONTROL_DATA:
++ urb_xfer_done = update_urb_state_xfer_comp(_ifxhc, hc_regs, urb, _urbd);
++ if (urb_xfer_done)
++ {
++ _ifxhc->control_phase = IFXHCD_CONTROL_STATUS;
++ _ifxhc->is_in = (_urbd->is_in)?0:1;
++ _ifxhc->xfer_len = 0;
++ _ifxhc->xfer_count = 0;
++ _ifxhc->xfer_buff = _ifxhcd->status_buf;
++ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
++ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
++ if(_ifxhc->is_in)
++ _ifxhc->short_rw =0;
++ else
++ _ifxhc->short_rw =1;
++ }
++ else // continue
++ {
++ _ifxhc->xfer_len = _urbd->xfer_len - urb->actual_length;
++ _ifxhc->xfer_count = urb->actual_length;
++ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
++ _ifxhc->data_pid_start = read_data_toggle(hc_regs);
++ }
++ /*== AVM/BC 20101111 Lock not needed ==*/
++ process_channels_sub(_ifxhcd);
++ break;
++ case IFXHCD_CONTROL_STATUS:
++ if (urb->status == -EINPROGRESS)
++ urb->status = 0;
++ release_channel(_ifxhcd,_ifxhc,HC_XFER_URB_COMPLETE);
++ break;
++ }
++ break;
++ case IFXUSB_EP_TYPE_BULK:
++ IFX_DEBUGPL(DBG_HCDV, " Bulk transfer complete\n");
++ urb_xfer_done = update_urb_state_xfer_comp(_ifxhc, hc_regs, urb, _urbd);
++ if (urb_xfer_done)
++ release_channel(_ifxhcd,_ifxhc,HC_XFER_URB_COMPLETE);
++ else
++ {
++ _ifxhc->xfer_len = _urbd->xfer_len - urb->actual_length;
++ _ifxhc->xfer_count = urb->actual_length;
++ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
++ _ifxhc->data_pid_start = read_data_toggle(hc_regs);
++ /*== AVM/BC 20101111 Lock not needed ==*/
++ process_channels_sub(_ifxhcd);
++ }
++ break;
++ case IFXUSB_EP_TYPE_INTR:
++ urb_xfer_done = update_urb_state_xfer_comp(_ifxhc, hc_regs, urb, _urbd);
++ release_channel(_ifxhcd,_ifxhc,HC_XFER_URB_COMPLETE);
++ break;
++ case IFXUSB_EP_TYPE_ISOC:
++// if (_urbd->isoc_split_pos == IFXUSB_HCSPLIT_XACTPOS_ALL)
++// halt_status = update_isoc_urb_state(_ifxhcd, _ifxhc, hc_regs, _urbd, HC_XFER_COMPLETE);
++// complete_periodic_xfer(_ifxhcd, _ifxhc, hc_regs, _urbd, halt_status);
++ urb_xfer_done = update_urb_state_xfer_comp(_ifxhc, hc_regs, urb, _urbd);
++ release_channel(_ifxhcd,_ifxhc,HC_XFER_URB_COMPLETE);
++ break;
++ }
++}
++
++
++
++void showint(uint32_t val_hcint
++ ,uint32_t val_hcintmsk
++ ,uint32_t val_hctsiz)
++{
++#ifdef __DEBUG__
++ hcint_data_t hcint = {.d32 = val_hcint};
++ hcint_data_t hcintmsk = {.d32 = val_hcintmsk};
++
++ printk(KERN_INFO " WITH FLAG: Sz:%08x I:%08X/M:%08X %s%s%s%s%s%s%s%s%s%s\n"
++ ,val_hctsiz,hcint.d32 ,hcintmsk.d32
++ ,(hcint.b.datatglerr || hcintmsk.b.datatglerr)?
++ (
++ (hcint.b.datatglerr && hcintmsk.b.datatglerr)?"datatglerr[*/*] ":
++ (
++ (hcint.b.datatglerr)?"datatglerr[*/] ":"datatglerr[/*] "
++ )
++ )
++ :""
++ ,(hcint.b.frmovrun || hcintmsk.b.frmovrun)?
++ (
++ (hcint.b.frmovrun && hcintmsk.b.frmovrun)?"frmovrun[*/*] ":
++ (
++ (hcint.b.frmovrun)?"frmovrun[*/] ":"frmovrun[/*] "
++ )
++ )
++ :""
++ ,(hcint.b.bblerr || hcintmsk.b.bblerr)?
++ (
++ (hcint.b.bblerr && hcintmsk.b.bblerr)?"bblerr[*/*] ":
++ (
++ (hcint.b.bblerr)?"bblerr[*/] ":"bblerr[/*] "
++ )
++ )
++ :""
++ ,(hcint.b.xacterr || hcintmsk.b.xacterr)?
++ (
++ (hcint.b.xacterr && hcintmsk.b.xacterr)?"xacterr[*/*] ":
++ (
++ (hcint.b.xacterr)?"xacterr[*/] ":"xacterr[/*] "
++ )
++ )
++ :""
++ ,(hcint.b.nyet || hcintmsk.b.nyet)?
++ (
++ (hcint.b.nyet && hcintmsk.b.nyet)?"nyet[*/*] ":
++ (
++ (hcint.b.nyet)?"nyet[*/] ":"nyet[/*] "
++ )
++ )
++ :""
++ ,(hcint.b.nak || hcintmsk.b.nak)?
++ (
++ (hcint.b.nak && hcintmsk.b.nak)?"nak[*/*] ":
++ (
++ (hcint.b.nak)?"nak[*/] ":"nak[/*] "
++ )
++ )
++ :""
++ ,(hcint.b.ack || hcintmsk.b.ack)?
++ (
++ (hcint.b.ack && hcintmsk.b.ack)?"ack[*/*] ":
++ (
++ (hcint.b.ack)?"ack[*/] ":"ack[/*] "
++ )
++ )
++ :""
++ ,(hcint.b.stall || hcintmsk.b.stall)?
++ (
++ (hcint.b.stall && hcintmsk.b.stall)?"stall[*/*] ":
++ (
++ (hcint.b.stall)?"stall[*/] ":"stall[/*] "
++ )
++ )
++ :""
++ ,(hcint.b.ahberr || hcintmsk.b.ahberr)?
++ (
++ (hcint.b.ahberr && hcintmsk.b.ahberr)?"ahberr[*/*] ":
++ (
++ (hcint.b.ahberr)?"ahberr[*/] ":"ahberr[/*] "
++ )
++ )
++ :""
++ ,(hcint.b.xfercomp || hcintmsk.b.xfercomp)?
++ (
++ (hcint.b.xfercomp && hcintmsk.b.xfercomp)?"xfercomp[*/*] ":
++ (
++ (hcint.b.xfercomp)?"xfercomp[*/] ":"xfercomp[/*] "
++ )
++ )
++ :""
++ );
++#endif
++}
++
++
++extern void ifxhcd_hc_dumb_rx(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc,uint8_t *dump_buf);
++
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_ctrlbulk_rx_nonsplit(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ hcint_data_t hcint;
++ hcint_data_t hcintmsk;
++ hctsiz_data_t hctsiz;
++
++ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
++ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++
++ disable_hc_int(_hc_regs,ack);
++ disable_hc_int(_hc_regs,nak);
++ disable_hc_int(_hc_regs,nyet);
++ _ifxhc->do_ping = 0;
++
++ if(_ifxhc->halt_status == HC_XFER_NAK)
++ {
++ if(_ifxhc->nak_retry_r)
++ {
++ _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
++ _ifxhc->nak_retry--;
++ if(_ifxhc->nak_retry)
++ {
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++ _ifxhc->wait_for_sof = 1;
++ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ else
++ {
++ _ifxhc->wait_for_sof = 0;
++ release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status);
++ }
++ }
++ else
++ {
++ _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++ _ifxhc->wait_for_sof = 1;
++ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ return 1;
++ }
++
++ if (hcint.b.xfercomp)
++ {
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ return 1;
++ }
++ else if (hcint.b.stall)
++ {
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ // ZLP shortcut
++ #if 0
++ if(hctsiz.b.pktcnt==0)
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ else
++ #endif
++ {
++ // Stall FIFO compensation.
++ #if 0
++ int sz1,sz2;
++ sz2=_ifxhc->start_pkt_count - hctsiz.b.pktcnt;
++ sz2*=_ifxhc->mps;
++ sz1=_ifxhc->xfer_len - hctsiz.b.xfersize;
++ sz2-=sz1;
++ if(sz2)
++ ifxhcd_hc_dumb_rx(&_ifxhcd->core_if, _ifxhc,_ifxhc->epqh->dump_buf);
++ #endif
++ _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++ }
++ return 1;
++ }
++ else if (hcint.b.bblerr)
++ {
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++
++ // ZLP shortcut
++ #if 0
++ if(hctsiz.b.pktcnt==0)
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ else
++ #endif
++ _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++ return 1;
++ }
++ else if (hcint.b.xacterr)
++ {
++ // ZLP shortcut
++ #if 1
++ if(hctsiz.b.pktcnt==0)
++ {
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ }
++ else
++ #endif
++ {
++ _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++
++ /* 20110803 AVM/WK FIX: Reset error count on any handshake */
++ if (hcint.b.nak || hcint.b.nyet || hcint.b.ack) {
++ _urbd->error_count = 1;
++ } else {
++ _urbd->error_count++;
++ }
++
++ if (_urbd->error_count >= 3)
++ {
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++ }
++ else
++ {
++ _ifxhc->wait_for_sof = 1;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ }
++ return 1;
++ }
++ else if(hcint.b.datatglerr )
++ {
++ _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
++ #if 1
++ if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0)
++ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
++ else
++ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
++ _ifxhc->wait_for_sof = 1;
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ #else
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
++ #endif
++ return 1;
++ }
++ else if(hcint.b.frmovrun )
++ {
++IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT0 FRMOVRUN [should be Period only]\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
++ return 1;
++ }
++ else if(hcint.b.nyet )
++ {
++IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT0 NYET [should be Out only]\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++ }
++ return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_ctrlbulk_tx_nonsplit(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ hcint_data_t hcint;
++ hcint_data_t hcintmsk;
++ hctsiz_data_t hctsiz;
++ int out_nak_enh = 0;
++
++#ifdef __DEBUG__
++static int first=0;
++#endif
++
++ if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
++ out_nak_enh = 1;
++
++ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
++ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++
++#ifdef __DEBUG__
++if(!first&& _ifxhc->ep_type == IFXUSB_EP_TYPE_BULK
++ &&(hcint.b.stall || hcint.b.datatglerr || hcint.b.frmovrun || hcint.b.bblerr || hcint.b.xacterr) && !hcint.b.ack)
++{
++ showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++ first=1;
++ printk(KERN_INFO " [%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X] \n"
++ ,*(_ifxhc->xfer_buff+ 0),*(_ifxhc->xfer_buff+ 1),*(_ifxhc->xfer_buff+ 2),*(_ifxhc->xfer_buff+ 3)
++ ,*(_ifxhc->xfer_buff+ 4),*(_ifxhc->xfer_buff+ 5),*(_ifxhc->xfer_buff+ 6),*(_ifxhc->xfer_buff+ 7)
++ ,*(_ifxhc->xfer_buff+ 8),*(_ifxhc->xfer_buff+ 9),*(_ifxhc->xfer_buff+10),*(_ifxhc->xfer_buff+11)
++ ,*(_ifxhc->xfer_buff+12),*(_ifxhc->xfer_buff+13),*(_ifxhc->xfer_buff+14),*(_ifxhc->xfer_buff+15));
++
++ printk(KERN_INFO " [_urbd->urb->actual_length:%08X _ifxhc->start_pkt_count:%08X hctsiz.b.pktcnt:%08X ,_urbd->xfer_len:%08x] \n"
++ ,_urbd->urb->actual_length
++ ,_ifxhc->start_pkt_count
++ ,hctsiz.b.pktcnt
++ ,_urbd->xfer_len);
++}
++#endif
++
++ if(_ifxhc->halt_status == HC_XFER_NAK)
++ {
++ if(_ifxhc->nak_retry_r)
++ {
++ _ifxhc->nak_retry--;
++ if(_ifxhc->nak_retry)
++ {
++ if(_ifxhc->xfer_len!=0)
++ _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++ _ifxhc->wait_for_sof = 1;
++ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ else
++ {
++ _ifxhc->wait_for_sof = 0;
++ release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status);
++ }
++ }
++ else
++ {
++ if(_ifxhc->xfer_len!=0)
++ _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++ _ifxhc->wait_for_sof = 1;
++ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ return 1;
++ }
++
++ if (hcint.b.xfercomp)
++ {
++ disable_hc_int(_hc_regs,ack);
++ disable_hc_int(_hc_regs,nak);
++ disable_hc_int(_hc_regs,nyet);
++ _urbd->error_count =0;
++ if(_ifxhc->xfer_len==0 && !hcint.b.ack && hcint.b.nak)
++ {
++ // Walkaround: When sending ZLP and receive NAK but also issue CMPT intr
++ // Solution: NoSplit: Resend at next SOF
++ // Split : Resend at next SOF with SSPLIT
++ if(hcint.b.nyet && !out_nak_enh)
++ _ifxhc->do_ping = 1;
++ else
++ _ifxhc->do_ping = 0;
++ _ifxhc->xfer_len = 0;
++ _ifxhc->xfer_count = 0;
++ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
++ _ifxhc->wait_for_sof = 1;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ else
++ {
++ _ifxhc->wait_for_sof = 0;
++ _ifxhc->do_ping = 0;
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ }
++ return 1;
++ }
++ else if (hcint.b.stall)
++ {
++ disable_hc_int(_hc_regs,ack);
++ disable_hc_int(_hc_regs,nak);
++ disable_hc_int(_hc_regs,nyet);
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ _ifxhc->do_ping =0;
++
++ // ZLP shortcut
++ #if 1
++ if(hctsiz.b.pktcnt==0)
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ else
++ #endif
++ {
++ if(_ifxhc->xfer_len!=0)
++ _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++ }
++ return 1;
++ }
++ else if (hcint.b.xacterr)
++ {
++ // ZLP shortcut
++ #if 1
++ if(hctsiz.b.pktcnt==0)
++ {
++ disable_hc_int(_hc_regs,ack);
++ disable_hc_int(_hc_regs,nak);
++ disable_hc_int(_hc_regs,nyet);
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ _ifxhc->do_ping =0;
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ }
++ else
++ #endif
++ {
++ if(_ifxhc->xfer_len!=0)
++ _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++
++ if (hcint.b.nak || hcint.b.nyet || hcint.b.ack)
++ {
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =1;
++ enable_hc_int(_hc_regs,ack);
++ enable_hc_int(_hc_regs,nak);
++ enable_hc_int(_hc_regs,nyet);
++ if(!out_nak_enh)
++ _ifxhc->do_ping =1;
++ else
++ _ifxhc->do_ping =0;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ else
++ {
++ _urbd->error_count ++ ;
++ if (_urbd->error_count == 3)
++ {
++ disable_hc_int(_hc_regs,ack);
++ disable_hc_int(_hc_regs,nak);
++ disable_hc_int(_hc_regs,nyet);
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ _ifxhc->do_ping =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++ }
++ else
++ {
++ enable_hc_int(_hc_regs,ack);
++ enable_hc_int(_hc_regs,nak);
++ enable_hc_int(_hc_regs,nyet);
++ _ifxhc->wait_for_sof =1;
++ if(!out_nak_enh)
++ _ifxhc->do_ping =1;
++ else
++ _ifxhc->do_ping =0;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ }
++ }
++ return 1;
++ }
++ else if(hcint.b.bblerr )
++ {
++IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT0 BABBLE [should be IN only]\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++ _ifxhc->do_ping = 0;
++ if(_ifxhc->xfer_len!=0)
++ _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++ return 1;
++ }
++ else if(hcint.b.nak || hcint.b.nyet)
++ {
++ if(!out_nak_enh)
++ {
++ // ZLP shortcut
++ #if 1
++ if(hctsiz.b.pktcnt==0)
++ {
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ _ifxhc->do_ping =0;
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ }
++ else
++ #endif
++ {
++ if(!out_nak_enh)
++ _ifxhc->do_ping =1;
++ else
++ _ifxhc->do_ping =0;
++ if(_ifxhc->xfer_len!=0)
++ {
++ _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ }
++ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++ _ifxhc->wait_for_sof = 1;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ return 1;
++ }
++ }
++ else if(hcint.b.datatglerr )
++ {
++IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT0 DATATGLERR [should be IN only]\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ _ifxhc->do_ping =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
++ return 1;
++ }
++ else if(hcint.b.frmovrun )
++ {
++IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT0 FRMOVRUN [should be PERIODIC only]\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ _ifxhc->do_ping =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
++ return 1;
++ }
++ return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_intr_rx_nonsplit(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ hcint_data_t hcint;
++ hcint_data_t hcintmsk;
++ hctsiz_data_t hctsiz;
++
++ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
++ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++ disable_hc_int(_hc_regs,ack);
++ disable_hc_int(_hc_regs,nak);
++ disable_hc_int(_hc_regs,nyet);
++ _ifxhc->do_ping =0;
++
++ if(_ifxhc->halt_status == HC_XFER_NAK)
++ {
++ if(_ifxhc->nak_retry_r)
++ {
++ _ifxhc->nak_retry--;
++ if(_ifxhc->nak_retry)
++ {
++ if(_ifxhc->xfer_len!=0)
++ _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++ _ifxhc->wait_for_sof = 1;
++ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ else
++ {
++ _ifxhc->wait_for_sof = 0;
++ release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status);
++ }
++ }
++ else
++ {
++ if(_ifxhc->xfer_len!=0)
++ _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++ _ifxhc->wait_for_sof = 1;
++ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ return 1;
++ }
++
++ if(hcint.b.xfercomp )
++ {
++ _urbd->error_count =0;
++ //restart INTR immediately
++ #if 1
++ if(hctsiz.b.pktcnt>0)
++ {
++ // TODO Re-initialize Channel (in next b_interval - 1 uF/F)
++ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
++ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ else
++ #endif
++ {
++ _ifxhc->wait_for_sof =0;
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ }
++ return 1;
++ }
++ else if (hcint.b.stall)
++ {
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++
++ // Don't care shortcut
++ #if 0
++ if(hctsiz.b.pktcnt==0)
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ else
++ #endif
++ {
++ // Stall FIFO compensation.
++ #if 0
++ int sz1,sz2;
++ sz2=_ifxhc->start_pkt_count - hctsiz.b.pktcnt;
++ sz2*=_ifxhc->mps;
++ sz1=_ifxhc->xfer_len - hctsiz.b.xfersize;
++ sz2-=sz1;
++ if(sz2)
++ ifxhcd_hc_dumb_rx(&_ifxhcd->core_if, _ifxhc,_ifxhc->epqh->dump_buf);
++ #endif
++ _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++ }
++ return 1;
++ }
++
++
++ else if (hcint.b.bblerr)
++ {
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++
++ // Don't care shortcut
++ #if 0
++ if(hctsiz.b.pktcnt==0)
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ else
++ #endif
++ {
++ _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++ }
++ return 1;
++ }
++ else if (hcint.b.nak || hcint.b.datatglerr || hcint.b.frmovrun)
++ {
++ _urbd->error_count =0;
++ //restart INTR immediately
++ #if 1
++ if(hctsiz.b.pktcnt>0)
++ {
++ // TODO Re-initialize Channel (in next b_interval - 1 uF/F)
++ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
++ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ else
++ #endif
++ {
++ _ifxhc->wait_for_sof =0;
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ }
++ return 1;
++ }
++ else if (hcint.b.xacterr)
++ {
++ // ZLP shortcut
++ #if 1
++ if(hctsiz.b.pktcnt==0)
++ {
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ }
++ else
++ #endif
++ {
++ /* 20110803 AVM/WK FIX: Reset error count on any handshake */
++ if (hcint.b.nak || hcint.b.nyet || hcint.b.ack) {
++ _urbd->error_count = 1;
++ } else {
++ _urbd->error_count++;
++ }
++
++ if(_urbd->error_count>=3)
++ {
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++ }
++ else
++ {
++ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ }
++ return 1;
++ }
++ else if(hcint.b.nyet )
++ {
++IFX_WARN("%s() %d Warning INTR IN SPLIT0 NYET [should be OUT only]\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++ return 1;
++ }
++ return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_intr_tx_nonsplit(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ hcint_data_t hcint;
++ hcint_data_t hcintmsk;
++ hctsiz_data_t hctsiz;
++ int out_nak_enh = 0;
++
++ if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
++ out_nak_enh = 1;
++
++ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
++ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++
++ if(_ifxhc->halt_status == HC_XFER_NAK)
++ {
++ if(_ifxhc->nak_retry_r)
++ {
++ _ifxhc->nak_retry--;
++ if(_ifxhc->nak_retry)
++ {
++ if(_ifxhc->xfer_len!=0)
++ _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++ _ifxhc->wait_for_sof = 1;
++ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ else
++ {
++ _ifxhc->wait_for_sof = 0;
++ release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status);
++ }
++ }
++ else
++ {
++ if(_ifxhc->xfer_len!=0)
++ _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++ _ifxhc->wait_for_sof = 1;
++ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ return 1;
++ }
++
++ if(hcint.b.xfercomp )
++ {
++ disable_hc_int(_hc_regs,ack);
++ disable_hc_int(_hc_regs,nak);
++ disable_hc_int(_hc_regs,nyet);
++ _urbd->error_count =0;
++ //restart INTR immediately
++ #if 0
++ if(hctsiz.b.pktcnt>0)
++ {
++ // TODO Re-initialize Channel (in next b_interval - 1 uF/F)
++ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
++ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++ if(hcint.b.nyet && !out_nak_enh )
++ _ifxhc->do_ping =1;
++ else
++ _ifxhc->do_ping =0;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ else
++ #endif
++ {
++ _ifxhc->wait_for_sof =0;
++ _ifxhc->do_ping =0;
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ }
++ return 1;
++ }
++ else if (hcint.b.stall)
++ {
++ disable_hc_int(_hc_regs,ack);
++ disable_hc_int(_hc_regs,nyet);
++ disable_hc_int(_hc_regs,nak);
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ _ifxhc->do_ping =0;
++
++ // Don't care shortcut
++ #if 0
++ if(hctsiz.b.pktcnt==0)
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ else
++ #endif
++ {
++ if(_ifxhc->xfer_len!=0)// !_ifxhc->is_in
++ _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++ }
++ return 1;
++ }
++ else if(hcint.b.nak || hcint.b.frmovrun )
++ {
++ disable_hc_int(_hc_regs,ack);
++ disable_hc_int(_hc_regs,nyet);
++ disable_hc_int(_hc_regs,nak);
++ _urbd->error_count =0;
++ //restart INTR immediately
++ #if 0
++ if(hctsiz.b.pktcnt>0)
++ {
++ // TODO Re-initialize Channel (in next b_interval - 1 uF/F)
++ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
++ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++ if(!out_nak_enh )
++ _ifxhc->do_ping =1;
++ else
++ _ifxhc->do_ping =0;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ else
++ #endif
++ {
++ _ifxhc->wait_for_sof =0;
++ _ifxhc->do_ping =0;
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ }
++ return 1;
++ }
++ else if(hcint.b.xacterr )
++ {
++ // ZLP shortcut
++ #if 1
++ if(hctsiz.b.pktcnt==0)
++ {
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ _ifxhc->do_ping =0;
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ }
++ else
++ #endif
++ {
++ /* 20110803 AVM/WK FIX: Reset error count on any handshake */
++ if (hcint.b.nak || hcint.b.nyet || hcint.b.ack) {
++ _urbd->error_count = 1;
++ } else {
++ _urbd->error_count++;
++ }
++
++ if(_urbd->error_count>=3)
++ {
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ _ifxhc->do_ping =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++ }
++ else
++ {
++ //_ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
++ //if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++ _ifxhc->wait_for_sof=1;
++ if(!out_nak_enh )
++ _ifxhc->do_ping =1;
++ else
++ _ifxhc->do_ping =0;
++
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ }
++ return 1;
++ }
++ else if(hcint.b.bblerr )
++ {
++IFX_WARN("%s() %d Warning INTR OUT SPLIT0 BABBLEERR [should be IN only]\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ _ifxhc->do_ping =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++ return 1;
++ }
++ else if(hcint.b.datatglerr )
++ {
++IFX_WARN("%s() %d Warning INTR OUT SPLIT0 DATATGLERR\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ _ifxhc->do_ping =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
++ return 1;
++ }
++ return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_isoc_rx_nonsplit(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ #if defined(__EN_ISOC__)
++ hcint_data_t hcint;
++ hcint_data_t hcintmsk;
++ hctsiz_data_t hctsiz;
++
++ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
++ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++
++ if (hcint.b.xfercomp || hcint.b.frmovrun)
++ {
++ _urbd->error_count=0;
++ disable_hc_int(_hc_regs,ack);
++ disable_hc_int(_hc_regs,nak);
++ disable_hc_int(_hc_regs,nyet);
++ _ifxhc->wait_for_sof = 0;
++ if (hcint.b.xfercomp)
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ else
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
++ }
++ else if (hcint.b.xacterr || hcint.b.bblerr)
++ {
++ #ifndef VR9Skip
++ if(hctsiz.b.pktcnt==0)
++ {
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ }
++ else
++ {
++ int sz1,sz2;
++ sz2=_ifxhc->start_pkt_count - hctsiz.b.pktcnt;
++ sz2*=_ifxhc->mps;
++ sz1=_ifxhc->xfer_len - hctsiz.b.xfersize;
++ sz2-=sz1;
++ if(sz2)
++ ifxhcd_hc_dumb_rx(&_ifxhcd->core_if, _ifxhc,_ifxhc->epqh->dump_buf);
++ _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++ _urbd->error_count++;
++ if(_urbd->error_count>=3)
++ {
++ _urbd->error_count=0;
++ _ifxhc->wait_for_sof = 0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++ }
++ else
++ {
++ _ifxhc->wait_for_sof = 1;
++ enable_hc_int(_hc_regs,ack);
++ enable_hc_int(_hc_regs,nak);
++ enable_hc_int(_hc_regs,nyet);
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ }
++ #endif
++ }
++ else if(hcint.b.datatglerr )
++ {
++ warning
++ }
++ else if(hcint.b.stall )
++ {
++ warning
++ }
++ #else
++ #endif
++ return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_isoc_tx_nonsplit(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ #if defined(__EN_ISOC__)
++ hcint_data_t hcint;
++ hcint_data_t hcintmsk;
++ hctsiz_data_t hctsiz;
++ int out_nak_enh = 0;
++
++ if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
++ out_nak_enh = 1;
++
++ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
++ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++
++ if (hcint.b.xfercomp)
++ {
++ _urbd->error_count=0;
++ disable_hc_int(_hc_regs,ack);
++ disable_hc_int(_hc_regs,nak);
++ disable_hc_int(_hc_regs,nyet);
++ _ifxhc->wait_for_sof = 0;
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ return 1;
++ }
++ else if (hcint.b.frmovrun)
++ {
++ #ifndef VR9Skip
++ _urbd->error_count=0;
++ disable_hc_int(_hc_regs,ack);
++ disable_hc_int(_hc_regs,nak);
++ disable_hc_int(_hc_regs,nyet);
++ _ifxhc->wait_for_sof = 0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
++ #endif
++ }
++ else if(hcint.b.datatglerr )
++ {
++ warning
++ }
++ else if(hcint.b.bblerr )
++ {
++ #ifndef VR9Skip
++ if(hctsiz.b.pktcnt==0)
++ {
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ }
++ else
++ {
++ int sz1,sz2;
++ sz2=_ifxhc->start_pkt_count - hctsiz.b.pktcnt;
++ sz2*=_ifxhc->mps;
++ sz1=_ifxhc->xfer_len - hctsiz.b.xfersize;
++ sz2-=sz1;
++ if(sz2)
++ ifxhcd_hc_dumb_rx(&_ifxhcd->core_if, _ifxhc,_ifxhc->epqh->dump_buf);
++ _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++ _urbd->error_count++;
++ if(_urbd->error_count>=3)
++ {
++ _urbd->error_count=0;
++ _ifxhc->wait_for_sof = 0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++ }
++ else
++ {
++ _ifxhc->wait_for_sof = 1;
++ enable_hc_int(_hc_regs,ack);
++ enable_hc_int(_hc_regs,nak);
++ enable_hc_int(_hc_regs,nyet);
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ }
++ #endif
++ }
++ else if(hcint.b.xacterr )
++ {
++ if(hctsiz.b.pktcnt==0)
++ {
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ return 1;
++ }
++ _urbd->error_count++;
++ if(_urbd->error_count>=3)
++ {
++ _urbd->error_count=0;
++ _ifxhc->wait_for_sof = 0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++ }
++ else
++ {
++ _ifxhc->wait_for_sof = 1;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ return 1;
++ }
++ else if(hcint.b.stall )
++ {
++ warning
++ }
++ #else
++ #endif
++ return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_ctrlbulk_rx_ssplit(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ hcint_data_t hcint;
++ hcint_data_t hcintmsk;
++ hctsiz_data_t hctsiz;
++
++ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
++ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++
++ disable_hc_int(_hc_regs,ack);
++ disable_hc_int(_hc_regs,nak);
++ disable_hc_int(_hc_regs,nyet);
++
++ _ifxhc->do_ping =0;
++
++ if (hcint.b.ack)
++ {
++ _urbd->error_count=0;
++ _ifxhc->split=2;
++ _ifxhc->wait_for_sof = 8;
++ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ else if (hcint.b.nak)
++ {
++ _ifxhc->wait_for_sof = 1;
++ _urbd->error_count = 0;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ else if (hcint.b.xacterr)
++ {
++ _urbd->error_count++;
++ if(_urbd->error_count>=3)
++ {
++ _urbd->error_count=0;
++ _ifxhc->wait_for_sof =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++ }
++ else
++ {
++ _ifxhc->wait_for_sof =1;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ return 1;
++ }
++ else if(hcint.b.bblerr )
++ {
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++ return 1;
++ }
++ else if(hcint.b.stall )
++ {
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++ return 1;
++ }
++ else if(hcint.b.datatglerr )
++ {
++IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT1 HC_XFER_DATA_TOGGLE_ERR\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
++ return 1;
++ }
++ else if(hcint.b.frmovrun )
++ {
++IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT1 HC_XFER_FRAME_OVERRUN\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
++ return 1;
++ }
++ else if(hcint.b.nyet )
++ {
++IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT1 NYET\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++ }
++ else if(hcint.b.xfercomp )
++ {
++IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT1 COMPLETE\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++ }
++ return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_ctrlbulk_tx_ssplit(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ hcint_data_t hcint;
++ hcint_data_t hcintmsk;
++ hctsiz_data_t hctsiz;
++ int out_nak_enh = 0;
++
++#ifdef __DEBUG__
++static int first=0;
++#endif
++
++ if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
++ out_nak_enh = 1;
++
++ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
++ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++ disable_hc_int(_hc_regs,ack);
++ disable_hc_int(_hc_regs,nak);
++ disable_hc_int(_hc_regs,nyet);
++
++#ifdef __DEBUG__
++ if(!first&& _ifxhc->ep_type == IFXUSB_EP_TYPE_BULK
++ &&(hcint.b.stall || hcint.b.datatglerr || hcint.b.frmovrun || hcint.b.bblerr || hcint.b.xacterr) && !hcint.b.ack)
++ {
++ showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++ first=1;
++ printk(KERN_INFO " [%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X] \n"
++ ,*(_ifxhc->xfer_buff+ 0),*(_ifxhc->xfer_buff+ 1),*(_ifxhc->xfer_buff+ 2),*(_ifxhc->xfer_buff+ 3)
++ ,*(_ifxhc->xfer_buff+ 4),*(_ifxhc->xfer_buff+ 5),*(_ifxhc->xfer_buff+ 6),*(_ifxhc->xfer_buff+ 7)
++ ,*(_ifxhc->xfer_buff+ 8),*(_ifxhc->xfer_buff+ 9),*(_ifxhc->xfer_buff+10),*(_ifxhc->xfer_buff+11)
++ ,*(_ifxhc->xfer_buff+12),*(_ifxhc->xfer_buff+13),*(_ifxhc->xfer_buff+14),*(_ifxhc->xfer_buff+15));
++
++ printk(KERN_INFO " [_urbd->urb->actual_length:%08X _ifxhc->start_pkt_count:%08X hctsiz.b.pktcnt:%08X ,_urbd->xfer_len:%08x] \n"
++ ,_urbd->urb->actual_length
++ ,_ifxhc->start_pkt_count
++ ,hctsiz.b.pktcnt
++ ,_urbd->xfer_len);
++ }
++#endif
++
++ if (hcint.b.ack )
++ {
++ _urbd->error_count=0;
++ if (_ifxhc->ep_type == IFXUSB_EP_TYPE_BULK || _ifxhc->control_phase != IFXHCD_CONTROL_SETUP)
++ _ifxhc->ssplit_out_xfer_count = _ifxhc->xfer_len;
++ _ifxhc->split=2;
++ _ifxhc->wait_for_sof =8;
++ _ifxhc->data_pid_start =read_data_toggle(_hc_regs);
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ else if(hcint.b.nyet)
++ {
++IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT1 NYET\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++ _urbd->error_count=0;
++ if (_ifxhc->ep_type == IFXUSB_EP_TYPE_BULK || _ifxhc->control_phase != IFXHCD_CONTROL_SETUP)
++ _ifxhc->ssplit_out_xfer_count = _ifxhc->xfer_len;
++ _ifxhc->split=2;
++ _ifxhc->wait_for_sof =1;
++ _ifxhc->data_pid_start =read_data_toggle(_hc_regs);
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ else if(hcint.b.nak )
++ {
++ _ifxhc->wait_for_sof =1;
++ if(!out_nak_enh )
++ _ifxhc->do_ping =1;
++ else
++ _ifxhc->do_ping =0;
++ _urbd->error_count =0;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ else if(hcint.b.xacterr )
++ {
++ _urbd->error_count++;
++ if(_urbd->error_count>=3)
++ {
++ _urbd->error_count=0;
++ _ifxhc->wait_for_sof =0;
++ _ifxhc->do_ping =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++ }
++ else
++ {
++ _ifxhc->wait_for_sof =1;
++ _ifxhc->do_ping =1;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ return 1;
++ }
++ else if(hcint.b.datatglerr )
++ {
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ _ifxhc->do_ping =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
++ return 1;
++ }
++ else if(hcint.b.bblerr )
++ {
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ _ifxhc->do_ping =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++ return 1;
++ }
++ else if(hcint.b.stall )
++ {
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ _ifxhc->do_ping =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++ return 1;
++ }
++ else if(hcint.b.frmovrun )
++ {
++IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT1 HC_XFER_FRAME_OVERRUN\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ _ifxhc->do_ping =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
++ return 1;
++ }
++ else if(hcint.b.xfercomp )
++ {
++ printk(KERN_INFO "%s() %d Warning CTRLBULK OUT SPLIT1 COMPLETE\n",__func__,__LINE__);
++ }
++ return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_intr_rx_ssplit(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ hcint_data_t hcint;
++ hcint_data_t hcintmsk;
++ hctsiz_data_t hctsiz;
++
++ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
++ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++
++ disable_hc_int(_hc_regs,ack);
++ disable_hc_int(_hc_regs,nak);
++ disable_hc_int(_hc_regs,nyet);
++
++ _ifxhc->do_ping =0;
++
++ if (hcint.b.ack )
++ {
++ /*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/
++ _ifxhc->nyet_count=0;
++
++ _urbd->error_count=0;
++ _ifxhc->split=2;
++ _ifxhc->wait_for_sof = 0;
++ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ else if(hcint.b.nak )
++ {
++ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
++ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++ _urbd->error_count=0;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ else if(hcint.b.xacterr )
++ {
++ hcchar_data_t hcchar;
++ hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar);
++ _urbd->error_count=hcchar.b.multicnt;
++ if(_urbd->error_count>=3)
++ {
++ _urbd->error_count=0;
++ _ifxhc->wait_for_sof = 0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++ }
++ else
++ {
++ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
++ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ return 1;
++ }
++ else if(hcint.b.stall )
++ {
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++ return 1;
++ }
++ else if(hcint.b.bblerr )
++ {
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++ return 1;
++ }
++ else if(hcint.b.frmovrun )
++ {
++ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
++ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ else if(hcint.b.datatglerr )
++ {
++IFX_WARN( "%s() %d Warning INTR IN SPLIT1 DATATGLERR\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
++ return 1;
++ }
++ else if(hcint.b.xfercomp )
++ {
++IFX_WARN("%s() %d Warning INTR IN SPLIT1 COMPLETE\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++ }
++ return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_intr_tx_ssplit(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ hcint_data_t hcint;
++ hcint_data_t hcintmsk;
++ hctsiz_data_t hctsiz;
++ int out_nak_enh = 0;
++
++ if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
++ out_nak_enh = 1;
++
++ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
++ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++
++ disable_hc_int(_hc_regs,ack);
++ disable_hc_int(_hc_regs,nak);
++ disable_hc_int(_hc_regs,nyet);
++
++ if (hcint.b.ack )
++ {
++ /*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/
++ _ifxhc->nyet_count=0;
++
++ _urbd->error_count=0;
++ _ifxhc->ssplit_out_xfer_count = _ifxhc->xfer_len;
++ _ifxhc->split=2;
++ _ifxhc->wait_for_sof = 0;
++ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ else if(hcint.b.nyet)
++ {
++IFX_WARN("%s() %d Warning INTR OUT SPLIT1 NYET\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++ _urbd->error_count=0;
++ _ifxhc->ssplit_out_xfer_count = _ifxhc->xfer_len;
++ _ifxhc->split=2;
++ _ifxhc->wait_for_sof = 0;
++ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ else if(hcint.b.nak )
++ {
++ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
++ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++ _urbd->error_count =0;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ else if(hcint.b.frmovrun )
++ {
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
++ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ else if(hcint.b.xacterr )
++ {
++ hcchar_data_t hcchar;
++ hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar);
++ _urbd->error_count=hcchar.b.multicnt;
++ if(_urbd->error_count>=3)
++ {
++ _urbd->error_count=0;
++ _ifxhc->wait_for_sof =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++ }
++ else
++ {
++ enable_hc_int(_hc_regs,ack);
++ enable_hc_int(_hc_regs,nak);
++ enable_hc_int(_hc_regs,nyet);
++ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
++ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ return 1;
++ }
++ else if(hcint.b.datatglerr )
++ {
++IFX_WARN("%s() %d Warning INTR IN SPLIT1 DATATGLERR\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
++ return 1;
++ }
++ else if(hcint.b.bblerr )
++ {
++IFX_WARN("%s() %d Warning INTR IN SPLIT1 BABBLEERR\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++ return 1;
++ }
++ else if(hcint.b.stall )
++ {
++IFX_WARN("%s() %d Warning INTR IN SPLIT1 STALL\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof =0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++ return 1;
++ }
++ else if(hcint.b.xfercomp )
++ {
++IFX_WARN("%s() %d Warning INTR IN SPLIT1 COMPLETE\n",__func__,__LINE__);
++showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++ }
++ return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_isoc_rx_ssplit(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ #if defined(__EN_ISOC__) && defined(__EN_ISOC_SPLIT__)
++ hcint_data_t hcint;
++ hcint_data_t hcintmsk;
++ hctsiz_data_t hctsiz;
++
++ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
++ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++ if (hcint.b.ack )
++ {
++ Do Complete Split
++ }
++ else if(hcint.b.frmovrun )
++ {
++ Rewind Buffer Pointers
++ Retry Start Split (in next b_interval ¡V 1 uF)
++ }
++ else if(hcint.b.datatglerr )
++ {
++ warning
++ }
++ else if(hcint.b.bblerr )
++ {
++ warning
++ }
++ else if(hcint.b.xacterr )
++ {
++ warning
++ }
++ else if(hcint.b.stall )
++ {
++ warning
++ }
++ else if(hcint.b.nak )
++ {
++ warning
++ }
++ else if(hcint.b.xfercomp )
++ {
++ warning
++ }
++ else if(hcint.b.nyet)
++ {
++ warning
++ }
++ #endif
++ return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_isoc_tx_ssplit(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ #if defined(__EN_ISOC__) && defined(__EN_ISOC_SPLIT__)
++ hcint_data_t hcint;
++ hcint_data_t hcintmsk;
++ hctsiz_data_t hctsiz;
++ int out_nak_enh = 0;
++
++ if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
++ out_nak_enh = 1;
++
++ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
++ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++ if (hcint.b.ack )
++ {
++ Do Next Start Split (in next b_interval ¡V 1 uF)
++ }
++ else if(hcint.b.frmovrun )
++ {
++ Do Next Transaction in next frame.
++ }
++ else if(hcint.b.datatglerr )
++ {
++ warning
++ }
++ else if(hcint.b.bblerr )
++ {
++ warning
++ }
++ else if(hcint.b.xacterr )
++ {
++ warning
++ }
++ else if(hcint.b.stall )
++ {
++ warning
++ }
++ else if(hcint.b.nak )
++ {
++ warning
++ }
++ else if(hcint.b.xfercomp )
++ {
++ warning
++ }
++ else if(hcint.b.nyet)
++ {
++ warning
++ }
++ #endif
++ return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_ctrlbulk_rx_csplit(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ hcint_data_t hcint;
++ hcint_data_t hcintmsk;
++ hctsiz_data_t hctsiz;
++
++ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
++ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++ disable_hc_int(_hc_regs,ack);
++ disable_hc_int(_hc_regs,nak);
++ disable_hc_int(_hc_regs,nyet);
++
++ _ifxhc->do_ping = 0;
++
++ if (hcint.b.xfercomp)
++ {
++ _urbd->error_count =0;
++ _ifxhc->wait_for_sof = 0;
++ _ifxhc->split=1;
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ return 1;
++ }
++ else if (hcint.b.nak)
++ {
++ _urbd->error_count=0;
++
++ _ifxhc->split = 1;
++ _ifxhc->wait_for_sof = 1;
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ else if(hcint.b.nyet)
++ {
++ _urbd->error_count=0;
++ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
++ _ifxhc->wait_for_sof = 1;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ else if(hcint.b.stall || hcint.b.bblerr )
++ {
++ _urbd->error_count=0;
++ _ifxhc->wait_for_sof = 0;
++ if (hcint.b.stall)
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++ else if(hcint.b.bblerr )
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++ return 1;
++ }
++ else if(hcint.b.xacterr )
++ {
++ _urbd->error_count++;
++ if(_urbd->error_count>=3)
++ {
++ _urbd->error_count=0;
++ _ifxhc->wait_for_sof = 0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++ }
++ else
++ {
++ _ifxhc->split=1;
++ _ifxhc->wait_for_sof = 1;
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ return 1;
++ }
++ else if(hcint.b.datatglerr )
++ {
++ if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0)
++ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
++ else
++ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
++ _ifxhc->split=1;
++ _ifxhc->wait_for_sof = 1;
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ else if(hcint.b.frmovrun )
++ {
++ _urbd->error_count=0;
++ _ifxhc->wait_for_sof = 0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
++ return 1;
++ }
++ return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_ctrlbulk_tx_csplit(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ hcint_data_t hcint;
++ hcint_data_t hcintmsk;
++ hctsiz_data_t hctsiz;
++ int out_nak_enh = 0;
++
++#if 1
++static int first=0;
++#endif
++
++ if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
++ out_nak_enh = 1;
++
++ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
++ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++ disable_hc_int(_hc_regs,ack);
++ disable_hc_int(_hc_regs,nak);
++ disable_hc_int(_hc_regs,nyet);
++
++#if 1
++ if(!first&& _ifxhc->ep_type == IFXUSB_EP_TYPE_BULK
++ &&(hcint.b.stall || hcint.b.datatglerr || hcint.b.frmovrun || hcint.b.bblerr || hcint.b.xacterr) && !hcint.b.ack)
++ {
++ showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
++ first=1;
++ printk(KERN_INFO " [%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X] \n"
++ ,*(_ifxhc->xfer_buff+ 0),*(_ifxhc->xfer_buff+ 1),*(_ifxhc->xfer_buff+ 2),*(_ifxhc->xfer_buff+ 3)
++ ,*(_ifxhc->xfer_buff+ 4),*(_ifxhc->xfer_buff+ 5),*(_ifxhc->xfer_buff+ 6),*(_ifxhc->xfer_buff+ 7)
++ ,*(_ifxhc->xfer_buff+ 8),*(_ifxhc->xfer_buff+ 9),*(_ifxhc->xfer_buff+10),*(_ifxhc->xfer_buff+11)
++ ,*(_ifxhc->xfer_buff+12),*(_ifxhc->xfer_buff+13),*(_ifxhc->xfer_buff+14),*(_ifxhc->xfer_buff+15));
++
++ printk(KERN_INFO " [_urbd->urb->actual_length:%08X _ifxhc->start_pkt_count:%08X hctsiz.b.pktcnt:%08X ,_urbd->xfer_len:%08x] \n"
++ ,_urbd->urb->actual_length
++ ,_ifxhc->start_pkt_count
++ ,hctsiz.b.pktcnt
++ ,_urbd->xfer_len);
++ }
++#endif
++
++ if(hcint.b.xfercomp )
++ {
++ _urbd->error_count=0;
++ _ifxhc->split=1;
++ _ifxhc->do_ping= 0;
++ #if 0
++ if(_ifxhc->xfer_len==0 && !hcint.b.ack && (hcint.b.nak || hcint.b.nyet))
++ {
++ // Walkaround: When sending ZLP and receive NYEY or NAK but also issue CMPT intr
++ // Solution: NoSplit: Resend at next SOF
++ // Split : Resend at next SOF with SSPLIT
++ _ifxhc->xfer_len = 0;
++ _ifxhc->xfer_count = 0;
++ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
++ _ifxhc->wait_for_sof = 1;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ else
++ #endif
++ {
++ _ifxhc->wait_for_sof = 0;
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ }
++ return 1;
++ }
++ else if(hcint.b.nak )
++ {
++ _urbd->error_count=0;
++
++ _ifxhc->split = 1;
++ _ifxhc->wait_for_sof = 1;
++ if(!out_nak_enh )
++ _ifxhc->do_ping =1;
++ else
++ _ifxhc->do_ping =0;
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ else if(hcint.b.nyet)
++ {
++ //Retry Complete Split
++ // Issue Retry instantly on next SOF, without gothrough process_channels
++ _urbd->error_count=0;
++ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
++ _ifxhc->wait_for_sof = 1;
++ _ifxhc->do_ping = 0;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ else if(hcint.b.stall )
++ {
++ _urbd->error_count=0;
++ _ifxhc->wait_for_sof = 0;
++ _ifxhc->do_ping = 0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++ return 1;
++ }
++ else if(hcint.b.xacterr )
++ {
++ _urbd->error_count++;
++ if(_urbd->error_count>=3)
++ {
++ _urbd->error_count=0;
++ _ifxhc->wait_for_sof = 0;
++ _ifxhc->do_ping = 0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++ }
++ else
++ {
++ _ifxhc->split=1;
++ _ifxhc->wait_for_sof = 1;
++ if(!out_nak_enh )
++ _ifxhc->do_ping =1;
++ else
++ _ifxhc->do_ping =0;
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ return 1;
++ }
++ else if(hcint.b.datatglerr )
++ {
++ if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0)
++ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
++ else
++ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
++ _ifxhc->split=1;
++ _ifxhc->wait_for_sof = 1;
++ if(!out_nak_enh )
++ _ifxhc->do_ping =1;
++ else
++ _ifxhc->do_ping =0;
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ else if(hcint.b.frmovrun )
++ {
++ _urbd->error_count=0;
++ _ifxhc->wait_for_sof = 0;
++ _ifxhc->do_ping = 0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
++ return 1;
++ }
++ else if(hcint.b.bblerr )
++ {
++ _urbd->error_count=0;
++ _ifxhc->wait_for_sof = 0;
++ _ifxhc->do_ping = 0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++ return 1;
++ }
++ return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_intr_rx_csplit(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ hcint_data_t hcint;
++ hcint_data_t hcintmsk;
++ hctsiz_data_t hctsiz;
++
++ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
++ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++ disable_hc_int(_hc_regs,ack);
++ disable_hc_int(_hc_regs,nak);
++ disable_hc_int(_hc_regs,nyet);
++ _ifxhc->do_ping = 0;
++
++ if (hcint.b.xfercomp )
++ {
++ _urbd->error_count=0;
++ _ifxhc->wait_for_sof = 0;
++ _ifxhc->split=1;
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ return 1;
++ }
++ else if(hcint.b.nak )
++ {
++ _urbd->error_count=0;
++ _ifxhc->split = 1;
++ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
++ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ else if(hcint.b.nyet)
++ {
++ _urbd->error_count=0;
++ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
++ _ifxhc->wait_for_sof = 0;
++
++ /*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/
++ _ifxhc->nyet_count++;
++ if(_ifxhc->nyet_count > 2) {
++ _ifxhc->split = 1;
++ _ifxhc->nyet_count = 0;
++ _ifxhc->wait_for_sof = 5;
++ }
++
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ else if(hcint.b.frmovrun || hcint.b.bblerr || hcint.b.stall )
++ {
++ _urbd->error_count=0;
++ _ifxhc->wait_for_sof = 0;
++ if (hcint.b.stall)
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++ else if(hcint.b.bblerr )
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++ else if(hcint.b.frmovrun )
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
++ return 1;
++ }
++ else if(hcint.b.xacterr )
++ {
++ hcchar_data_t hcchar;
++ hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar);
++ _urbd->error_count=hcchar.b.multicnt;
++ if(_urbd->error_count>=3)
++ {
++ _urbd->error_count=0;
++ _ifxhc->wait_for_sof = 0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++ }
++ else
++ {
++ _ifxhc->split=1;
++ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
++ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ return 1;
++ }
++ else if(hcint.b.datatglerr )
++ {
++ if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0)
++ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
++ else
++ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
++ _ifxhc->split=1;
++ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
++ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_intr_tx_csplit(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ hcint_data_t hcint;
++ hcint_data_t hcintmsk;
++ hctsiz_data_t hctsiz;
++ int out_nak_enh = 0;
++
++ if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
++ out_nak_enh = 1;
++
++ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
++ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++ disable_hc_int(_hc_regs,ack);
++ disable_hc_int(_hc_regs,nak);
++ disable_hc_int(_hc_regs,nyet);
++
++ if(hcint.b.xfercomp )
++ {
++ _urbd->error_count=0;
++ _ifxhc->wait_for_sof = 0;
++ _ifxhc->split=1;
++ _ifxhc->do_ping = 0;
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ return 1;
++ }
++ else if(hcint.b.nak )
++ {
++ _urbd->error_count=0;
++ _ifxhc->split = 1;
++ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
++ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++ if(!out_nak_enh )
++ _ifxhc->do_ping =1;
++ else
++ _ifxhc->do_ping =0;
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ else if(hcint.b.nyet)
++ {
++ _urbd->error_count=0;
++ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
++ _ifxhc->wait_for_sof = 0;
++ _ifxhc->do_ping = 0;
++
++ /*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/
++ _ifxhc->nyet_count++;
++ if(_ifxhc->nyet_count > 2) {
++ _ifxhc->split = 1;
++ _ifxhc->nyet_count = 0;
++ _ifxhc->wait_for_sof = 5;
++ }
++
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ else if(hcint.b.stall || hcint.b.frmovrun)
++ {
++ _urbd->error_count=0;
++ _ifxhc->wait_for_sof = 0;
++ _ifxhc->do_ping = 0;
++ if (hcint.b.stall)
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++ else if(hcint.b.frmovrun )
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
++ return 1;
++ }
++ else if(hcint.b.xacterr )
++ {
++ hcchar_data_t hcchar;
++ hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar);
++ _urbd->error_count=hcchar.b.multicnt;
++ if(_urbd->error_count>=3)
++ {
++ _urbd->error_count=0;
++ _ifxhc->wait_for_sof = 0;
++ _ifxhc->do_ping = 0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
++ }
++ else
++ {
++ _ifxhc->split=1;
++ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
++ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
++ if(!out_nak_enh )
++ _ifxhc->do_ping =1;
++ else
++ _ifxhc->do_ping =0;
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ }
++ return 1;
++ }
++ else if(hcint.b.datatglerr )
++ {
++ if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0)
++ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
++ else
++ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
++ _ifxhc->split=1;
++ if(!out_nak_enh )
++ _ifxhc->do_ping =1;
++ else
++ _ifxhc->do_ping =0;
++ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
++ _ifxhc->xfer_count = _urbd->urb->actual_length;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ else if(hcint.b.bblerr )
++ {
++ _urbd->error_count=0;
++ _ifxhc->wait_for_sof = 0;
++ _ifxhc->do_ping = 0;
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
++ return 1;
++ }
++ return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_isoc_rx_csplit(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ #if defined(__EN_ISOC__) && defined(__EN_ISOC_SPLIT__)
++ hcint_data_t hcint;
++ hcint_data_t hcintmsk;
++ hctsiz_data_t hctsiz;
++
++ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
++ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++ if(hcint.b.xfercomp )
++ {
++ disable_hc_int(_hc_regs,ack);
++ disable_hc_int(_hc_regs,nak);
++ disable_hc_int(_hc_regs,nyet);
++ _urbd->error_count=0;
++ _ifxhc->wait_for_sof = 0;
++ _ifxhc->split=1;
++ complete_channel(_ifxhcd, _ifxhc, _urbd);
++ return 1;
++ }
++ else if(hcint.b.nak )
++ {
++ Retry Start Split (in next b_interval ¡V 1 uF)
++ }
++ else if(hcint.b.nyet)
++ {
++ //Do Next Complete Split
++ // Issue Retry instantly on next SOF, without gothrough process_channels
++ _urbd->error_count=0;
++ //disable_hc_int(_hc_regs,ack);
++ //disable_hc_int(_hc_regs,nak);
++ //disable_hc_int(_hc_regs,datatglerr);
++ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
++ _ifxhc->wait_for_sof = 1;
++ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
++ return 1;
++ }
++ else if(hcint.b.frmovrun || hcint.b.stall || hcint.b.bblerr)
++ {
++ _urbd->error_count=0;
++ disable_hc_int(_hc_regs,ack);
++ disable_hc_int(_hc_regs,nyet);
++ disable_hc_int(_hc_regs,nak);
++ _ifxhc->wait_for_sof = 0;
++
++ //if(hctsiz.b.pktcnt==0)
++ //{
++ // complete_channel(_ifxhcd, _ifxhc, _urbd);
++ // return 1;
++ //}
++ //else
++ // _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
++ if (hcint.b.stall)
++ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
++ else if(hcint.b.frmovrun )
++ else if(hcint.b.bblerr )
++ return 1;
++ }
++ else if(hcint.b.xacterr )
++ {
++ Rewind Buffer Pointers
++ if (HCCHARn.EC = = 3) // ERR response received
++ {
++ Record ERR error
++ Do Next Start Split (in next frame)
++ }
++ else
++ {
++ De-allocate Channel
++ }
++ }
++ else if(hcint.b.datatglerr )
++ {
++ warning
++ }
++ else if(hcint.b.ack )
++ {
++ warning
++ }
++ #endif
++ return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++static int32_t chhltd_isoc_tx_csplit(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ #if defined(__EN_ISOC__) && defined(__EN_ISOC_SPLIT__)
++ hcint_data_t hcint;
++ hcint_data_t hcintmsk;
++ hctsiz_data_t hctsiz;
++ int out_nak_enh = 0;
++
++ if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
++ out_nak_enh = 1;
++
++ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
++ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
++ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++ warning
++ #endif
++ return 0;
++}
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++
++static int32_t handle_hc_chhltd_intr(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ IFX_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: Channel Halted--\n", _ifxhc->hc_num);
++
++ _ifxhc->halting = 0;
++ _ifxhc->xfer_started = 0;
++
++ if (_ifxhc->halt_status == HC_XFER_URB_DEQUEUE ||
++ _ifxhc->halt_status == HC_XFER_AHB_ERR) {
++ /*
++ * Just release the channel. A dequeue can happen on a
++ * transfer timeout. In the case of an AHB Error, the channel
++ * was forced to halt because there's no way to gracefully
++ * recover.
++ */
++ release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status);
++ return 1;
++ }
++
++ if (_ifxhc->ep_type == IFXUSB_EP_TYPE_CTRL || _ifxhc->ep_type == IFXUSB_EP_TYPE_BULK)
++ {
++ if (_ifxhc->split==0)
++ {
++ if(_ifxhc->is_in)
++ return (chhltd_ctrlbulk_rx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++ else
++ return (chhltd_ctrlbulk_tx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++ }
++ else if(_ifxhc->split==1)
++ {
++ if(_ifxhc->is_in)
++ return (chhltd_ctrlbulk_rx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++ else
++ return (chhltd_ctrlbulk_tx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++ }
++ else if(_ifxhc->split==2)
++ {
++ if(_ifxhc->is_in)
++ return (chhltd_ctrlbulk_rx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++ else
++ return (chhltd_ctrlbulk_tx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++ }
++ }
++ else if(_ifxhc->ep_type == IFXUSB_EP_TYPE_INTR)
++ {
++ if (_ifxhc->split==0)
++ {
++ if(_ifxhc->is_in)
++ return (chhltd_intr_rx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++ else
++ return (chhltd_intr_tx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++ }
++ else if(_ifxhc->split==1)
++ {
++ if(_ifxhc->is_in)
++ return (chhltd_intr_rx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++ else
++ return (chhltd_intr_tx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++ }
++ else if(_ifxhc->split==2)
++ {
++ if(_ifxhc->is_in)
++ return (chhltd_intr_rx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++ else
++ return (chhltd_intr_tx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++ }
++ }
++ else if(_ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC)
++ {
++ if (_ifxhc->split==0)
++ {
++ if(_ifxhc->is_in)
++ return (chhltd_isoc_rx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++ else
++ return (chhltd_isoc_tx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++ }
++ else if(_ifxhc->split==1)
++ {
++ if(_ifxhc->is_in)
++ return (chhltd_isoc_rx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++ else
++ return (chhltd_isoc_tx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++ }
++ else if(_ifxhc->split==2)
++ {
++ if(_ifxhc->is_in)
++ return (chhltd_isoc_rx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++ else
++ return (chhltd_isoc_tx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
++ }
++ }
++ return 0;
++}
++
++/*
++ * Handles a host channel AHB error interrupt. This handler is only called in
++ * DMA mode.
++ */
++static void hc_other_intr_dump(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ #ifdef __DEBUG__
++ hcchar_data_t hcchar;
++ hcsplt_data_t hcsplt;
++ hctsiz_data_t hctsiz;
++ uint32_t hcdma;
++ struct urb *urb = _urbd->urb;
++ hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar);
++ hcsplt.d32 = ifxusb_rreg(&_hc_regs->hcsplt);
++ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
++ hcdma = ifxusb_rreg(&_hc_regs->hcdma);
++
++ IFX_ERROR("Channel %d\n", _ifxhc->hc_num);
++ IFX_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
++ IFX_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
++ IFX_ERROR(" Device address: %d\n", usb_pipedevice(urb->pipe));
++ IFX_ERROR(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
++ (usb_pipein(urb->pipe) ? "IN" : "OUT"));
++ IFX_ERROR(" Endpoint type: %s\n",
++ ({char *pipetype;
++ switch (usb_pipetype(urb->pipe)) {
++ case PIPE_CONTROL: pipetype = "CTRL"; break;
++ case PIPE_BULK: pipetype = "BULK"; break;
++ case PIPE_INTERRUPT: pipetype = "INTR"; break;
++ case PIPE_ISOCHRONOUS: pipetype = "ISOC"; break;
++ default: pipetype = "????"; break;
++ }; pipetype;}));
++ IFX_ERROR(" Speed: %s\n",
++ ({char *speed;
++ switch (urb->dev->speed) {
++ case USB_SPEED_HIGH: speed = "HS"; break;
++ case USB_SPEED_FULL: speed = "FS"; break;
++ case USB_SPEED_LOW: speed = "LS"; break;
++ default: speed = "????"; break;
++ }; speed;}));
++ IFX_ERROR(" Max packet size: %d\n",
++ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
++ IFX_ERROR(" Data buffer length: %d\n", urb->transfer_buffer_length);
++ IFX_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n",
++ urb->transfer_buffer, (void *)urb->transfer_dma);
++ IFX_ERROR(" Setup buffer: %p, Setup DMA: %p\n",
++ urb->setup_packet, (void *)urb->setup_dma);
++ IFX_ERROR(" Interval: %d\n", urb->interval);
++ #endif //__DEBUG__
++}
++
++/*
++ * Handles a host channel ACK interrupt. This interrupt is enabled when
++ * errors occur, and during Start Split transactions.
++ */
++static int32_t handle_hc_ack_intr(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ _urbd->error_count=0;
++ if(_ifxhc->nak_countdown_r)
++ {
++ _ifxhc->nak_retry=_ifxhc->nak_retry_r;
++ _ifxhc->nak_countdown=_ifxhc->nak_countdown_r;
++ }
++ else
++ disable_hc_int(_hc_regs,nak);
++ disable_hc_int(_hc_regs,ack);
++ return 1;
++}
++
++/*
++ * Handles a host channel ACK interrupt. This interrupt is enabled when
++ * errors occur, and during Start Split transactions.
++ */
++static int32_t handle_hc_nak_intr(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++
++ _urbd->error_count=0;
++
++ if(_ifxhc->nak_countdown_r)
++ {
++ _ifxhc->nak_countdown--;
++ if(!_ifxhc->nak_countdown)
++ {
++ _ifxhc->nak_countdown=_ifxhc->nak_countdown_r;
++ disable_hc_int(_hc_regs,ack);
++ disable_hc_int(_hc_regs,nak);
++ ifxhcd_hc_halt(&_ifxhcd->core_if, _ifxhc, HC_XFER_NAK);
++ }
++ else
++ enable_hc_int(_hc_regs,ack);
++ }
++ else
++ {
++ disable_hc_int(_hc_regs,ack);
++ disable_hc_int(_hc_regs,nak);
++ }
++ return 1;
++}
++
++/*
++ * Handles a host channel AHB error interrupt. This handler is only called in
++ * DMA mode.
++ */
++static int32_t handle_hc_ahberr_intr(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ IFX_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++ "AHB Error--\n", _ifxhc->hc_num);
++ hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
++
++ ifxhcd_hc_halt(&_ifxhcd->core_if, _ifxhc, HC_XFER_AHB_ERR);
++ return 1;
++}
++
++/*
++ * Datatoggle
++ */
++static int32_t handle_hc_datatglerr_intr(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ IFX_ERROR( "--Host Channel %d Interrupt: "
++ "DATATOGGLE Error--\n", _ifxhc->hc_num);
++ hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
++ disable_hc_int(_hc_regs,datatglerr);
++ return 1;
++}
++
++
++
++/*
++ * Interrupts which should not been triggered
++ */
++static int32_t handle_hc_frmovrun_intr(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ IFX_ERROR( "--Host Channel %d Interrupt: "
++ "FrameOverRun Error--\n", _ifxhc->hc_num);
++ hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
++ disable_hc_int(_hc_regs,frmovrun);
++ return 1;
++}
++
++static int32_t handle_hc_bblerr_intr(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ IFX_ERROR( "--Host Channel %d Interrupt: "
++ "BBL Error--\n", _ifxhc->hc_num);
++ hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
++ disable_hc_int(_hc_regs,bblerr);
++ return 1;
++}
++
++static int32_t handle_hc_xacterr_intr(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ IFX_ERROR( "--Host Channel %d Interrupt: "
++ "XACT Error--\n", _ifxhc->hc_num);
++ hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
++ disable_hc_int(_hc_regs,xacterr);
++ return 1;
++}
++
++static int32_t handle_hc_nyet_intr(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ IFX_ERROR( "--Host Channel %d Interrupt: "
++ "NYET--\n", _ifxhc->hc_num);
++ hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
++ _urbd->error_count=0;
++ disable_hc_int(_hc_regs,nyet);
++ return 1;
++}
++
++static int32_t handle_hc_stall_intr(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ IFX_ERROR( "--Host Channel %d Interrupt: "
++ "STALL--\n", _ifxhc->hc_num);
++ hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
++ disable_hc_int(_hc_regs,stall);
++ return 1;
++}
++
++static int32_t handle_hc_xfercomp_intr(ifxhcd_hcd_t *_ifxhcd,
++ ifxhcd_hc_t *_ifxhc,
++ ifxusb_hc_regs_t *_hc_regs,
++ ifxhcd_urbd_t *_urbd)
++{
++ IFX_ERROR( "--Host Channel %d Interrupt: "
++ "XFERCOMP--\n", _ifxhc->hc_num);
++ hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
++ disable_hc_int(_hc_regs,xfercomp);
++ return 1;
++}
++
++
++
++/* This interrupt indicates that the specified host channels has a pending
++ * interrupt. There are multiple conditions that can cause each host channel
++ * interrupt. This function determines which conditions have occurred for this
++ * host channel interrupt and handles them appropriately. */
++static int32_t handle_hc_n_intr (ifxhcd_hcd_t *_ifxhcd, uint32_t _num)
++{
++ uint32_t hcintval,hcintmsk;
++ hcint_data_t hcint;
++ ifxhcd_hc_t *ifxhc;
++ ifxusb_hc_regs_t *hc_regs;
++ ifxhcd_urbd_t *urbd;
++ unsigned long flags;
++
++ int retval = 0;
++
++ IFX_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", _num);
++
++ /*== AVM/BC 20101111 Lock needed ==*/
++ SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
++
++ ifxhc = &_ifxhcd->ifxhc[_num];
++ hc_regs = _ifxhcd->core_if.hc_regs[_num];
++
++ hcintval = ifxusb_rreg(&hc_regs->hcint);
++ hcintmsk = ifxusb_rreg(&hc_regs->hcintmsk);
++ hcint.d32 = hcintval & hcintmsk;
++ IFX_DEBUGPL(DBG_HCDV, " 0x%08x & 0x%08x = 0x%08x\n",
++ hcintval, hcintmsk, hcint.d32);
++
++ urbd = list_entry(ifxhc->epqh->urbd_list.next, ifxhcd_urbd_t, urbd_list_entry);
++
++ if (hcint.b.datatglerr)
++ retval |= handle_hc_datatglerr_intr(_ifxhcd, ifxhc, hc_regs, urbd);
++ if (hcint.b.frmovrun)
++ retval |= handle_hc_frmovrun_intr(_ifxhcd, ifxhc, hc_regs, urbd);
++ if (hcint.b.bblerr)
++ retval |= handle_hc_bblerr_intr(_ifxhcd, ifxhc, hc_regs, urbd);
++ if (hcint.b.xacterr)
++ retval |= handle_hc_xacterr_intr(_ifxhcd, ifxhc, hc_regs, urbd);
++ if (hcint.b.nyet)
++ retval |= handle_hc_nyet_intr(_ifxhcd, ifxhc, hc_regs, urbd);
++ if (hcint.b.ack)
++ retval |= handle_hc_ack_intr(_ifxhcd, ifxhc, hc_regs, urbd);
++ if (hcint.b.nak)
++ retval |= handle_hc_nak_intr(_ifxhcd, ifxhc, hc_regs, urbd);
++ if (hcint.b.stall)
++ retval |= handle_hc_stall_intr(_ifxhcd, ifxhc, hc_regs, urbd);
++ if (hcint.b.ahberr) {
++ clear_hc_int(hc_regs, ahberr);
++ retval |= handle_hc_ahberr_intr(_ifxhcd, ifxhc, hc_regs, urbd);
++ }
++ if (hcint.b.chhltd) {
++ /* == 20110901 AVM/WK Fix: Flag must not be cleared after restart of channel ==*/
++ clear_hc_int(hc_regs, chhltd);
++ retval |= handle_hc_chhltd_intr(_ifxhcd, ifxhc, hc_regs, urbd);
++ }
++ if (hcint.b.xfercomp)
++ retval |= handle_hc_xfercomp_intr(_ifxhcd, ifxhc, hc_regs, urbd);
++
++ /* == 20110901 AVM/WK Fix: Never clear possibly new intvals ==*/
++ //ifxusb_wreg(&hc_regs->hcint,hcintval);
++
++ SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
++
++ return retval;
++}
++
++
++
++
++
++
++static uint8_t update_interval_counter(ifxhcd_epqh_t *_epqh,uint32_t _diff)
++{
++ if(_diff>=_epqh->period_counter)
++ {
++ _epqh->period_do=1;
++ if(_diff>_epqh->interval)
++ _epqh->period_counter=1;
++ else
++ _epqh->period_counter=_epqh->period_counter+_epqh->interval-_diff;
++ return 1;
++ }
++ _epqh->period_counter=_epqh->period_counter-_diff;
++ return 0;
++}
++
++
++
++
++/*
++ * Handles the start-of-frame interrupt in host mode. Non-periodic
++ * transactions may be queued to the DWC_otg controller for the current
++ * (micro)frame. Periodic transactions may be queued to the controller for the
++ * next (micro)frame.
++ */
++static int32_t handle_sof_intr (ifxhcd_hcd_t *_ifxhcd)
++{
++ #ifdef __DYN_SOF_INTR__
++ uint8_t with_count_down=0;
++ #endif
++ uint8_t active_on=0;
++ uint8_t ready_on=0;
++ struct list_head *epqh_entry;
++ ifxhcd_epqh_t *epqh;
++ hfnum_data_t hfnum;
++ uint32_t fndiff;
++
++ unsigned long flags;
++#ifdef __USE_TIMER_4_SOF__
++ uint32_t wait_for_sof = 0x10000;
++#endif
++
++ SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
++
++ {
++ int num_channels;
++ ifxusb_hc_regs_t *hc_regs;
++ int i;
++ num_channels = _ifxhcd->core_if.params.host_channels;
++
++// AVM/WK moved block here due to use of SOF timer
++ hfnum.d32 = ifxusb_rreg(&_ifxhcd->core_if.host_global_regs->hfnum);
++ fndiff = hfnum.b.frnum;
++ fndiff+= 0x00004000;
++ fndiff-= _ifxhcd->lastframe ;
++ fndiff&= 0x00003FFF;
++ if(!fndiff) fndiff =1;
++
++ for (i = 0; i < num_channels; i++)
++ {
++ if(_ifxhcd->ifxhc[i].wait_for_sof && _ifxhcd->ifxhc[i].xfer_started)
++ {
++#ifdef __USE_TIMER_4_SOF__
++ if (_ifxhcd->ifxhc[i].wait_for_sof > fndiff) {
++ _ifxhcd->ifxhc[i].wait_for_sof -= fndiff;
++ } else {
++ _ifxhcd->ifxhc[i].wait_for_sof = 0;
++ }
++#else
++ _ifxhcd->ifxhc[i].wait_for_sof--;
++#endif
++ if(_ifxhcd->ifxhc[i].wait_for_sof==0)
++ {
++ hcint_data_t hcint= { .d32=0 };
++ hc_regs = _ifxhcd->core_if.hc_regs[i];
++
++ hcint.d32 =0xFFFFFFFF;
++ ifxusb_wreg(&hc_regs->hcint, hcint.d32);
++
++ hcint.d32=ifxusb_rreg(&hc_regs->hcintmsk);
++ hcint.b.nak =0;
++ hcint.b.ack =0;
++ /* == 20110901 AVM/WK Fix: We don't need NOT YET IRQ ==*/
++ hcint.b.nyet=0;
++ _ifxhcd->ifxhc[i].nak_countdown=_ifxhcd->ifxhc[i].nak_countdown_r;
++ if(_ifxhcd->ifxhc[i].nak_countdown_r)
++ hcint.b.nak =1;
++ ifxusb_wreg(&hc_regs->hcintmsk, hcint.d32);
++
++ /* AVM WK / BC 20100827
++ * FIX: Packet was ignored because of wrong Oddframe bit
++ */
++ if (_ifxhcd->ifxhc[i].ep_type == IFXUSB_EP_TYPE_INTR || _ifxhcd->ifxhc[i].ep_type == IFXUSB_EP_TYPE_ISOC)
++ {
++ hcchar_data_t hcchar;
++ hcchar.d32 = _ifxhcd->ifxhc[i].hcchar;
++ hfnum.d32 = ifxusb_rreg(&_ifxhcd->core_if.host_global_regs->hfnum);
++ /* 1 if _next_ frame is odd, 0 if it's even */
++ hcchar.b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
++ _ifxhcd->ifxhc[i].hcchar = hcchar.d32;
++ }
++
++ ifxusb_wreg(&hc_regs->hcchar, _ifxhcd->ifxhc[i].hcchar);
++
++ }
++ }
++ else
++ _ifxhcd->ifxhc[i].wait_for_sof=0;
++
++#ifdef __USE_TIMER_4_SOF__
++ if (_ifxhcd->ifxhc[i].wait_for_sof && (wait_for_sof > _ifxhcd->ifxhc[i].wait_for_sof)) {
++ wait_for_sof = _ifxhcd->ifxhc[i].wait_for_sof;
++ }
++#endif
++ }
++ }
++
++ // ISOC Active
++ #ifdef __EN_ISOC__
++ #error ISOC not supported: missing SOF code
++ epqh_entry = _ifxhcd->epqh_isoc_active.next;
++ while (epqh_entry != &_ifxhcd->epqh_isoc_active)
++ {
++ epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry);
++ epqh_entry = epqh_entry->next;
++ #ifdef __DYN_SOF_INTR__
++ with_count_down=1;
++ #endif
++ active_on+=update_interval_counter(epqh,fndiff);
++ }
++
++ // ISOC Ready
++ epqh_entry = _ifxhcd->epqh_isoc_ready.next;
++ while (epqh_entry != &_ifxhcd->epqh_isoc_ready)
++ {
++ epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry);
++ epqh_entry = epqh_entry->next;
++ #ifdef __DYN_SOF_INTR__
++ with_count_down=1;
++ #endif
++ ready_on+=update_interval_counter(epqh,fndiff);
++ }
++ #endif
++
++ // INTR Active
++ epqh_entry = _ifxhcd->epqh_intr_active.next;
++ while (epqh_entry != &_ifxhcd->epqh_intr_active)
++ {
++ epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry);
++ epqh_entry = epqh_entry->next;
++ #ifdef __DYN_SOF_INTR__
++ with_count_down=1;
++ #endif
++#ifdef __USE_TIMER_4_SOF__
++ if (update_interval_counter(epqh,fndiff)) {
++ active_on ++;
++ wait_for_sof = 1;
++ } else {
++ if (epqh->period_counter && (wait_for_sof > epqh->period_counter)) {
++ wait_for_sof = epqh->period_counter;
++ }
++ }
++#else
++ active_on+=update_interval_counter(epqh,fndiff);
++#endif
++ }
++
++ // INTR Ready
++ epqh_entry = _ifxhcd->epqh_intr_ready.next;
++ while (epqh_entry != &_ifxhcd->epqh_intr_ready)
++ {
++ epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry);
++ epqh_entry = epqh_entry->next;
++ #ifdef __DYN_SOF_INTR__
++ with_count_down=1;
++ #endif
++#ifdef __USE_TIMER_4_SOF__
++ if (update_interval_counter(epqh,fndiff)) {
++ ready_on ++;
++ wait_for_sof = 1;
++ } else {
++ if (epqh->period_counter && (wait_for_sof > epqh->period_counter)) {
++ wait_for_sof = epqh->period_counter;
++ }
++ }
++#else
++ ready_on+=update_interval_counter(epqh,fndiff);
++#endif
++ }
++
++ // Stdby
++ epqh_entry = _ifxhcd->epqh_stdby.next;
++ while (epqh_entry != &_ifxhcd->epqh_stdby)
++ {
++ epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry);
++ epqh_entry = epqh_entry->next;
++ if(epqh->period_counter > 0 ) {
++#ifdef __USE_TIMER_4_SOF__
++ if (epqh->period_counter > fndiff) {
++ epqh->period_counter -= fndiff;
++ } else {
++ epqh->period_counter = 0;
++ }
++#else
++ epqh->period_counter --;
++#endif
++ #ifdef __DYN_SOF_INTR__
++ with_count_down=1;
++ #endif
++ }
++ if(epqh->period_counter == 0) {
++ ifxhcd_epqh_idle_periodic(epqh);
++ }
++#ifdef __USE_TIMER_4_SOF__
++ else {
++ if (wait_for_sof > epqh->period_counter) {
++ wait_for_sof = epqh->period_counter;
++ }
++ }
++#endif
++ }
++ SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
++
++ if(ready_on)
++ select_eps(_ifxhcd);
++ else if(active_on)
++ process_channels(_ifxhcd);
++
++ /* Clear interrupt */
++ {
++ gint_data_t gintsts;
++ gintsts.d32=0;
++ gintsts.b.sofintr = 1;
++ ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32);
++
++ #ifdef __DYN_SOF_INTR__
++ if(!with_count_down)
++ ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk, gintsts.d32,0);
++ #endif
++#ifdef __USE_TIMER_4_SOF__
++ wait_for_sof &= 0xFFFF; // reduce to 16 Bits.
++
++ if(wait_for_sof == 1) {
++ // enable SOF
++ gint_data_t gintsts;
++ gintsts.d32=0;
++ gintsts.b.sofintr = 1;
++ ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk, 0,gintsts.d32);
++ } else {
++ // disable SOF
++ ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk, gintsts.d32,0);
++ if (wait_for_sof > 1) {
++ // use timer, not SOF IRQ
++ hprt0_data_t hprt0;
++ ktime_t ktime;
++ hprt0.d32 = ifxusb_read_hprt0 (&_ifxhcd->core_if);
++ if (hprt0.b.prtspd == IFXUSB_HPRT0_PRTSPD_HIGH_SPEED) {
++ ktime = ktime_set(0, wait_for_sof * 125 * 1000); /*--- wakeup in n*125usec ---*/
++ } else {
++ ktime = ktime_set(0, wait_for_sof * (1000*1000)); /*--- wakeup in n*1000usec ---*/
++ }
++ hrtimer_start(&_ifxhcd->hr_timer, ktime, HRTIMER_MODE_REL);
++ }
++ }
++#endif
++ }
++ _ifxhcd->lastframe=hfnum.b.frnum;
++ return 1;
++}
++
++
++
++/* There are multiple conditions that can cause a port interrupt. This function
++ * determines which interrupt conditions have occurred and handles them
++ * appropriately. */
++static int32_t handle_port_intr (ifxhcd_hcd_t *_ifxhcd)
++{
++ int retval = 0;
++ hprt0_data_t hprt0;
++ hprt0_data_t hprt0_modify;
++
++ hprt0.d32 =
++ hprt0_modify.d32 = ifxusb_rreg(_ifxhcd->core_if.hprt0);
++
++ /* Clear appropriate bits in HPRT0 to clear the interrupt bit in
++ * GINTSTS */
++
++ hprt0_modify.b.prtena = 0;
++ hprt0_modify.b.prtconndet = 0;
++ hprt0_modify.b.prtenchng = 0;
++ hprt0_modify.b.prtovrcurrchng = 0;
++
++ /* Port Connect Detected
++ * Set flag and clear if detected */
++ if (hprt0.b.prtconndet) {
++ IFX_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x "
++ "Port Connect Detected--\n", hprt0.d32);
++ _ifxhcd->flags.b.port_connect_status_change = 1;
++ _ifxhcd->flags.b.port_connect_status = 1;
++ hprt0_modify.b.prtconndet = 1;
++
++ /* The Hub driver asserts a reset when it sees port connect
++ * status change flag */
++ retval |= 1;
++ }
++
++ /* Port Enable Changed
++ * Clear if detected - Set internal flag if disabled */
++ if (hprt0.b.prtenchng) {
++
++ IFX_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x "
++ "Port Enable Changed--\n", hprt0.d32);
++ hprt0_modify.b.prtenchng = 1;
++ if (hprt0.b.prtena == 1)
++ /* Port has been enabled set the reset change flag */
++ _ifxhcd->flags.b.port_reset_change = 1;
++ else
++ _ifxhcd->flags.b.port_enable_change = 1;
++ retval |= 1;
++ }
++
++ /* Overcurrent Change Interrupt */
++
++ if (hprt0.b.prtovrcurrchng) {
++ IFX_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x "
++ "Port Overcurrent Changed--\n", hprt0.d32);
++ _ifxhcd->flags.b.port_over_current_change = 1;
++ hprt0_modify.b.prtovrcurrchng = 1;
++ retval |= 1;
++ }
++
++ /* Clear Port Interrupts */
++ ifxusb_wreg(_ifxhcd->core_if.hprt0, hprt0_modify.d32);
++ return retval;
++}
++
++/*
++ * This interrupt indicates that SUSPEND state has been detected on
++ * the USB.
++ * No Functioning in Host Mode
++ */
++static int32_t handle_usb_suspend_intr(ifxhcd_hcd_t *_ifxhcd)
++{
++ gint_data_t gintsts;
++ IFX_DEBUGP("USB SUSPEND RECEIVED!\n");
++ /* Clear interrupt */
++ gintsts.d32 = 0;
++ gintsts.b.usbsuspend = 1;
++ ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32);
++ return 1;
++}
++
++/*
++ * This interrupt indicates that the IFXUSB controller has detected a
++ * resume or remote wakeup sequence. If the IFXUSB controller is in
++ * low power mode, the handler must brings the controller out of low
++ * power mode. The controller automatically begins resume
++ * signaling. The handler schedules a time to stop resume signaling.
++ */
++static int32_t handle_wakeup_detected_intr(ifxhcd_hcd_t *_ifxhcd)
++{
++ gint_data_t gintsts;
++ hprt0_data_t hprt0 = {.d32=0};
++ pcgcctl_data_t pcgcctl = {.d32=0};
++ ifxusb_core_if_t *core_if = &_ifxhcd->core_if;
++
++ IFX_DEBUGPL(DBG_ANY, "++Resume and Remote Wakeup Detected Interrupt++\n");
++
++ /*
++ * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
++ * so that OPT tests pass with all PHYs).
++ */
++ /* Restart the Phy Clock */
++ pcgcctl.b.stoppclk = 1;
++ ifxusb_mreg(core_if->pcgcctl, pcgcctl.d32, 0);
++ UDELAY(10);
++
++ /* Now wait for 70 ms. */
++ hprt0.d32 = ifxusb_read_hprt0( core_if );
++ IFX_DEBUGPL(DBG_ANY,"Resume: HPRT0=%0x\n", hprt0.d32);
++ MDELAY(70);
++ hprt0.b.prtres = 0; /* Resume */
++ ifxusb_wreg(core_if->hprt0, hprt0.d32);
++ IFX_DEBUGPL(DBG_ANY,"Clear Resume: HPRT0=%0x\n", ifxusb_rreg(core_if->hprt0));
++
++ /* Clear interrupt */
++ gintsts.d32 = 0;
++ gintsts.b.wkupintr = 1;
++ ifxusb_wreg(&core_if->core_global_regs->gintsts, gintsts.d32);
++ return 1;
++}
++
++/*
++ * This interrupt indicates that a device is initiating the Session
++ * Request Protocol to request the host to turn on bus power so a new
++ * session can begin. The handler responds by turning on bus power. If
++ * the DWC_otg controller is in low power mode, the handler brings the
++ * controller out of low power mode before turning on bus power.
++ */
++static int32_t handle_session_req_intr(ifxhcd_hcd_t *_ifxhcd)
++{
++ /* Clear interrupt */
++ gint_data_t gintsts = { .d32 = 0 };
++ gintsts.b.sessreqintr = 1;
++ ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32);
++ return 1;
++}
++
++/*
++ * This interrupt indicates that a device has been disconnected from
++ * the root port.
++ */
++static int32_t handle_disconnect_intr(ifxhcd_hcd_t *_ifxhcd)
++{
++ gint_data_t gintsts;
++
++ ifxhcd_disconnect(_ifxhcd);
++
++ gintsts.d32 = 0;
++ gintsts.b.disconnect = 1;
++ ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32);
++ return 1;
++}
++
++/*
++ * This function handles the Connector ID Status Change Interrupt. It
++ * reads the OTG Interrupt Register (GOTCTL) to determine whether this
++ * is a Device to Host Mode transition or a Host Mode to Device
++ * Transition.
++ * This only occurs when the cable is connected/removed from the PHY
++ * connector.
++ */
++static int32_t handle_conn_id_status_change_intr(ifxhcd_hcd_t *_ifxhcd)
++{
++ gint_data_t gintsts;
++
++ IFX_WARN("ID Status Change Interrupt: currently in %s mode\n",
++ ifxusb_mode(&_ifxhcd->core_if) ? "Host" : "Device");
++
++ gintsts.d32 = 0;
++ gintsts.b.conidstschng = 1;
++ ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32);
++ return 1;
++}
++
++static int32_t handle_otg_intr(ifxhcd_hcd_t *_ifxhcd)
++{
++ ifxusb_core_global_regs_t *global_regs = _ifxhcd->core_if.core_global_regs;
++ gotgint_data_t gotgint;
++ gotgint.d32 = ifxusb_rreg( &global_regs->gotgint);
++ /* Clear GOTGINT */
++ ifxusb_wreg (&global_regs->gotgint, gotgint.d32);
++ return 1;
++}
++
++/** This function will log a debug message */
++static int32_t handle_mode_mismatch_intr(ifxhcd_hcd_t *_ifxhcd)
++{
++ gint_data_t gintsts;
++
++ IFX_WARN("Mode Mismatch Interrupt: currently in %s mode\n",
++ ifxusb_mode(&_ifxhcd->core_if) ? "Host" : "Device");
++ gintsts.d32 = 0;
++ gintsts.b.modemismatch = 1;
++ ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32);
++ return 1;
++}
++
++/** This function handles interrupts for the HCD. */
++int32_t ifxhcd_handle_intr (ifxhcd_hcd_t *_ifxhcd)
++{
++ int retval = 0;
++
++ ifxusb_core_if_t *core_if = &_ifxhcd->core_if;
++ /* AVM/BC 20101111 Unnecesary variable removed*/
++ //gint_data_t gintsts,gintsts2;
++ gint_data_t gintsts;
++
++ /* Check if HOST Mode */
++ if (ifxusb_is_device_mode(core_if))
++ {
++ IFX_ERROR("%s() CRITICAL! IN DEVICE MODE\n", __func__);
++ return 0;
++ }
++
++ gintsts.d32 = ifxusb_read_core_intr(core_if);
++
++ if (!gintsts.d32)
++ return 0;
++
++ //Common INT
++ if (gintsts.b.modemismatch)
++ {
++ retval |= handle_mode_mismatch_intr(_ifxhcd);
++ gintsts.b.modemismatch=0;
++ }
++ if (gintsts.b.otgintr)
++ {
++ retval |= handle_otg_intr(_ifxhcd);
++ gintsts.b.otgintr=0;
++ }
++ if (gintsts.b.conidstschng)
++ {
++ retval |= handle_conn_id_status_change_intr(_ifxhcd);
++ gintsts.b.conidstschng=0;
++ }
++ if (gintsts.b.disconnect)
++ {
++ retval |= handle_disconnect_intr(_ifxhcd);
++ gintsts.b.disconnect=0;
++ }
++ if (gintsts.b.sessreqintr)
++ {
++ retval |= handle_session_req_intr(_ifxhcd);
++ gintsts.b.sessreqintr=0;
++ }
++ if (gintsts.b.wkupintr)
++ {
++ retval |= handle_wakeup_detected_intr(_ifxhcd);
++ gintsts.b.wkupintr=0;
++ }
++ if (gintsts.b.usbsuspend)
++ {
++ retval |= handle_usb_suspend_intr(_ifxhcd);
++ gintsts.b.usbsuspend=0;
++ }
++
++ //Host Int
++ if (gintsts.b.sofintr)
++ {
++ retval |= handle_sof_intr (_ifxhcd);
++ gintsts.b.sofintr=0;
++ }
++ if (gintsts.b.portintr)
++ {
++ retval |= handle_port_intr (_ifxhcd);
++ gintsts.b.portintr=0;
++ }
++ if (gintsts.b.hcintr)
++ {
++ int i;
++ haint_data_t haint;
++ haint.d32 = ifxusb_read_host_all_channels_intr(core_if);
++ for (i=0; i< core_if->params.host_channels; i++)
++ if (haint.b2.chint & (1 << i))
++ retval |= handle_hc_n_intr (_ifxhcd, i);
++ gintsts.b.hcintr=0;
++ }
++ return retval;
++}
+diff --git a/drivers/usb/ifxhcd/ifxhcd_queue.c b/drivers/usb/ifxhcd/ifxhcd_queue.c
+new file mode 100644
+index 0000000..8f9dd25
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxhcd_queue.c
+@@ -0,0 +1,418 @@
++/*****************************************************************************
++ ** FILE NAME : ifxhcd_queue.c
++ ** PROJECT : IFX USB sub-system V3
++ ** MODULES : IFX USB sub-system Host and Device driver
++ ** SRC VERSION : 1.0
++ ** DATE : 1/Jan/2009
++ ** AUTHOR : Chen, Howard
++ ** DESCRIPTION : This file contains the functions to manage Queue Heads and Queue
++ ** Transfer Descriptors.
++ *****************************************************************************/
++
++/*!
++ \file ifxhcd_queue.c
++ \ingroup IFXUSB_DRIVER_V3
++ \brief This file contains the functions to manage Queue Heads and Queue
++ Transfer Descriptors.
++*/
++#include <linux/version.h>
++#include "ifxusb_version.h"
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/string.h>
++
++#include "ifxusb_plat.h"
++#include "ifxusb_regs.h"
++#include "ifxusb_cif.h"
++#include "ifxhcd.h"
++
++#ifdef __EPQD_DESTROY_TIMEOUT__
++ #define epqh_self_destroy_timeout 5
++ static void eqph_destroy_func(unsigned long _ptr)
++ {
++ ifxhcd_epqh_t *epqh=(ifxhcd_epqh_t *)_ptr;
++ if(epqh)
++ {
++ ifxhcd_epqh_free (epqh);
++ }
++ }
++#endif
++
++#define SCHEDULE_SLOP 10
++
++/*!
++ \brief This function allocates and initializes a EPQH.
++
++ \param _ifxhcd The HCD state structure for the USB Host controller.
++ \param[in] _urb Holds the information about the device/endpoint that we need
++ to initialize the EPQH.
++
++ \return Returns pointer to the newly allocated EPQH, or NULL on error.
++ */
++ifxhcd_epqh_t *ifxhcd_epqh_create (ifxhcd_hcd_t *_ifxhcd, struct urb *_urb)
++{
++ ifxhcd_epqh_t *epqh;
++
++ hprt0_data_t hprt0;
++ struct usb_host_endpoint *sysep = ifxhcd_urb_to_endpoint(_urb);
++
++ /* Allocate memory */
++// epqh=(ifxhcd_epqh_t *) kmalloc (sizeof(ifxhcd_epqh_t), GFP_KERNEL);
++ epqh=(ifxhcd_epqh_t *) kmalloc (sizeof(ifxhcd_epqh_t), GFP_ATOMIC);
++
++ if(epqh == NULL)
++ return NULL;
++
++ memset (epqh, 0, sizeof (ifxhcd_epqh_t));
++
++ epqh->sysep=sysep;
++
++ /* Initialize EPQH */
++ switch (usb_pipetype(_urb->pipe))
++ {
++ case PIPE_CONTROL : epqh->ep_type = IFXUSB_EP_TYPE_CTRL; break;
++ case PIPE_BULK : epqh->ep_type = IFXUSB_EP_TYPE_BULK; break;
++ case PIPE_ISOCHRONOUS: epqh->ep_type = IFXUSB_EP_TYPE_ISOC; break;
++ case PIPE_INTERRUPT : epqh->ep_type = IFXUSB_EP_TYPE_INTR; break;
++ }
++
++ //epqh->data_toggle = IFXUSB_HC_PID_DATA0;
++
++ epqh->mps = usb_maxpacket(_urb->dev, _urb->pipe, !(usb_pipein(_urb->pipe)));
++
++ hprt0.d32 = ifxusb_read_hprt0 (&_ifxhcd->core_if);
++
++ INIT_LIST_HEAD(&epqh->urbd_list);
++ INIT_LIST_HEAD(&epqh->epqh_list_entry);
++ epqh->hc = NULL;
++
++ epqh->dump_buf = ifxusb_alloc_buf(epqh->mps, 0);
++
++ /* FS/LS Enpoint on HS Hub
++ * NOT virtual root hub */
++ epqh->need_split = 0;
++ epqh->pkt_count_limit=0;
++ if(epqh->ep_type == IFXUSB_EP_TYPE_BULK && !(usb_pipein(_urb->pipe)) )
++ epqh->pkt_count_limit=4;
++ if (hprt0.b.prtspd == IFXUSB_HPRT0_PRTSPD_HIGH_SPEED &&
++ ((_urb->dev->speed == USB_SPEED_LOW) ||
++ (_urb->dev->speed == USB_SPEED_FULL)) &&
++ (_urb->dev->tt) && (_urb->dev->tt->hub->devnum != 1))
++ {
++ IFX_DEBUGPL(DBG_HCD, "QH init: EP %d: TT found at hub addr %d, for port %d\n",
++ usb_pipeendpoint(_urb->pipe), _urb->dev->tt->hub->devnum,
++ _urb->dev->ttport);
++ epqh->need_split = 1;
++ epqh->pkt_count_limit=1;
++ }
++
++ if (epqh->ep_type == IFXUSB_EP_TYPE_INTR ||
++ epqh->ep_type == IFXUSB_EP_TYPE_ISOC)
++ {
++ /* Compute scheduling parameters once and save them. */
++ epqh->interval = _urb->interval;
++ if(epqh->need_split)
++ epqh->interval *= 8;
++ }
++
++ epqh->period_counter=0;
++ epqh->is_active=0;
++
++ #ifdef __EPQD_DESTROY_TIMEOUT__
++ /* Start a timer for this transfer. */
++ init_timer(&epqh->destroy_timer);
++ epqh->destroy_timer.function = eqph_destroy_func;
++ epqh->destroy_timer.data = (unsigned long)(epqh);
++ #endif
++
++ #ifdef __DEBUG__
++ IFX_DEBUGPL(DBG_HCD , "IFXUSB HCD EPQH Initialized\n");
++ IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH - epqh = %p\n", epqh);
++ IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH - Device Address = %d EP %d, %s\n",
++ _urb->dev->devnum,
++ usb_pipeendpoint(_urb->pipe),
++ usb_pipein(_urb->pipe) == USB_DIR_IN ? "IN" : "OUT");
++ IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH - Speed = %s\n",
++ ({ char *speed; switch (_urb->dev->speed) {
++ case USB_SPEED_LOW: speed = "low" ; break;
++ case USB_SPEED_FULL: speed = "full"; break;
++ case USB_SPEED_HIGH: speed = "high"; break;
++ default: speed = "?"; break;
++ }; speed;}));
++ IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH - Type = %s\n",
++ ({
++ char *type; switch (epqh->ep_type)
++ {
++ case IFXUSB_EP_TYPE_ISOC: type = "isochronous"; break;
++ case IFXUSB_EP_TYPE_INTR: type = "interrupt" ; break;
++ case IFXUSB_EP_TYPE_CTRL: type = "control" ; break;
++ case IFXUSB_EP_TYPE_BULK: type = "bulk" ; break;
++ default: type = "?"; break;
++ };
++ type;
++ }));
++ if (epqh->ep_type == IFXUSB_EP_TYPE_INTR)
++ IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH - interval = %d\n", epqh->interval);
++ #endif
++
++ return epqh;
++}
++
++
++
++
++
++
++/*!
++ \brief Free the EPQH. EPQH should already be removed from a list.
++ URBD list should already be empty if called from URB Dequeue.
++
++ \param[in] _epqh The EPQH to free.
++ */
++void ifxhcd_epqh_free (ifxhcd_epqh_t *_epqh)
++{
++ unsigned long flags;
++
++ if(_epqh->sysep) _epqh->sysep->hcpriv=NULL;
++ _epqh->sysep=NULL;
++
++ if(!_epqh)
++ return;
++
++ /* Free each QTD in the QTD list */
++ local_irq_save (flags);
++ if (!list_empty(&_epqh->urbd_list))
++ IFX_WARN("%s() invalid epqh state\n",__func__);
++
++ #if defined(__UNALIGNED_BUFFER_ADJ__)
++ if(_epqh->aligned_buf)
++ ifxusb_free_buf(_epqh->aligned_buf);
++ if(_epqh->aligned_setup)
++ ifxusb_free_buf(_epqh->aligned_setup);
++ #endif
++
++ if (!list_empty(&_epqh->epqh_list_entry))
++ list_del_init(&_epqh->epqh_list_entry);
++
++ #ifdef __EPQD_DESTROY_TIMEOUT__
++ del_timer(&_epqh->destroy_timer);
++ #endif
++ if(_epqh->dump_buf)
++ ifxusb_free_buf(_epqh->dump_buf);
++ _epqh->dump_buf=0;
++
++
++ kfree (_epqh);
++ local_irq_restore (flags);
++}
++
++/*!
++ \brief This function adds a EPQH to
++
++ \return 0 if successful, negative error code otherwise.
++ */
++void ifxhcd_epqh_ready(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh)
++{
++ unsigned long flags;
++ local_irq_save(flags);
++ if (list_empty(&_epqh->epqh_list_entry))
++ {
++ #ifdef __EN_ISOC__
++ if (_epqh->ep_type == IFXUSB_EP_TYPE_ISOC)
++ list_add_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_ready);
++ else
++ #endif
++ if(_epqh->ep_type == IFXUSB_EP_TYPE_INTR)
++ list_add_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_intr_ready);
++ else
++ list_add_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_np_ready);
++ _epqh->is_active=0;
++ }
++ else if(!_epqh->is_active)
++ {
++ #ifdef __EN_ISOC__
++ if (_epqh->ep_type == IFXUSB_EP_TYPE_ISOC)
++ list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_ready);
++ else
++ #endif
++ if(_epqh->ep_type == IFXUSB_EP_TYPE_INTR)
++ list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_intr_ready);
++ else
++ list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_np_ready);
++ }
++ #ifdef __EPQD_DESTROY_TIMEOUT__
++ del_timer(&_epqh->destroy_timer);
++ #endif
++ local_irq_restore(flags);
++}
++
++void ifxhcd_epqh_active(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh)
++{
++ unsigned long flags;
++ local_irq_save(flags);
++ if (list_empty(&_epqh->epqh_list_entry))
++ IFX_WARN("%s() invalid epqh state\n",__func__);
++ #ifdef __EN_ISOC__
++ if (_epqh->ep_type == IFXUSB_EP_TYPE_ISOC)
++ list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_active);
++ else
++ #endif
++ if(_epqh->ep_type == IFXUSB_EP_TYPE_INTR)
++ list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_intr_active);
++ else
++ list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_np_active);
++ _epqh->is_active=1;
++ #ifdef __EPQD_DESTROY_TIMEOUT__
++ del_timer(&_epqh->destroy_timer);
++ #endif
++ local_irq_restore(flags);
++}
++
++void ifxhcd_epqh_idle(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh)
++{
++ unsigned long flags;
++ local_irq_save(flags);
++
++ if (list_empty(&_epqh->urbd_list))
++ {
++ if(_epqh->ep_type == IFXUSB_EP_TYPE_ISOC || _epqh->ep_type == IFXUSB_EP_TYPE_INTR)
++ {
++ list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_stdby);
++ }
++ else
++ {
++ list_del_init(&_epqh->epqh_list_entry);
++ #ifdef __EPQD_DESTROY_TIMEOUT__
++ del_timer(&_epqh->destroy_timer);
++ _epqh->destroy_timer.expires = jiffies + (HZ*epqh_self_destroy_timeout);
++ add_timer(&_epqh->destroy_timer );
++ #endif
++ }
++ }
++ else
++ {
++ #ifdef __EN_ISOC__
++ if (_epqh->ep_type == IFXUSB_EP_TYPE_ISOC)
++ list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_ready);
++ else
++ #endif
++ if(_epqh->ep_type == IFXUSB_EP_TYPE_INTR)
++ list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_intr_ready);
++ else
++ list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_np_ready);
++ }
++ _epqh->is_active=0;
++ local_irq_restore(flags);
++}
++
++
++void ifxhcd_epqh_idle_periodic(ifxhcd_epqh_t *_epqh)
++{
++ unsigned long flags;
++ if(_epqh->ep_type != IFXUSB_EP_TYPE_ISOC && _epqh->ep_type != IFXUSB_EP_TYPE_INTR)
++ return;
++
++ local_irq_save(flags);
++
++ if (list_empty(&_epqh->epqh_list_entry))
++ IFX_WARN("%s() invalid epqh state\n",__func__);
++ if (!list_empty(&_epqh->urbd_list))
++ IFX_WARN("%s() invalid epqh state(not empty)\n",__func__);
++
++ _epqh->is_active=0;
++ list_del_init(&_epqh->epqh_list_entry);
++ #ifdef __EPQD_DESTROY_TIMEOUT__
++ del_timer(&_epqh->destroy_timer);
++ _epqh->destroy_timer.expires = jiffies + (HZ*epqh_self_destroy_timeout);
++ add_timer(&_epqh->destroy_timer );
++ #endif
++
++ local_irq_restore(flags);
++}
++
++
++int ifxhcd_urbd_create (ifxhcd_hcd_t *_ifxhcd,struct urb *_urb)
++{
++ ifxhcd_urbd_t *urbd;
++ struct usb_host_endpoint *sysep;
++ ifxhcd_epqh_t *epqh;
++ unsigned long flags;
++ /* == AVM/WK 20100714 retval correctly initialized ==*/
++ int retval = -ENOMEM;
++
++ /*== AVM/BC 20100630 - Spinlock ==*/
++ //local_irq_save(flags);
++ SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
++
++// urbd = (ifxhcd_urbd_t *) kmalloc (sizeof(ifxhcd_urbd_t), GFP_KERNEL);
++ urbd = (ifxhcd_urbd_t *) kmalloc (sizeof(ifxhcd_urbd_t), GFP_ATOMIC);
++ if (urbd != NULL) /* Initializes a QTD structure.*/
++ {
++ retval = 0;
++ memset (urbd, 0, sizeof (ifxhcd_urbd_t));
++
++ sysep = ifxhcd_urb_to_endpoint(_urb);
++ epqh = (ifxhcd_epqh_t *)sysep->hcpriv;
++ if (epqh == NULL)
++ {
++ epqh = ifxhcd_epqh_create (_ifxhcd, _urb);
++ if (epqh == NULL)
++ {
++ retval = -ENOSPC;
++ kfree(urbd);
++ //local_irq_restore (flags);
++ SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
++ return retval;
++ }
++ sysep->hcpriv = epqh;
++ }
++
++ INIT_LIST_HEAD(&urbd->urbd_list_entry);
++
++ /*== AVM/BC 20100630 - 2.6.28 needs HCD link/unlink URBs ==*/
++ retval = usb_hcd_link_urb_to_ep(ifxhcd_to_syshcd(_ifxhcd), _urb);
++
++ if (unlikely(retval)){
++ kfree(urbd);
++ kfree(epqh);
++ SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
++ return retval;
++ }
++
++ list_add_tail(&urbd->urbd_list_entry, &epqh->urbd_list);
++ urbd->urb = _urb;
++ _urb->hcpriv = urbd;
++
++ urbd->epqh=epqh;
++ urbd->is_in=usb_pipein(_urb->pipe) ? 1 : 0;;
++
++ urbd->xfer_len=_urb->transfer_buffer_length;
++#define URB_NO_SETUP_DMA_MAP 0
++
++ if(urbd->xfer_len>0)
++ {
++ if(_urb->transfer_flags && URB_NO_TRANSFER_DMA_MAP)
++ urbd->xfer_buff = (uint8_t *) (KSEG1ADDR((uint32_t *)_urb->transfer_dma));
++ else
++ urbd->xfer_buff = (uint8_t *) _urb->transfer_buffer;
++ }
++ if(epqh->ep_type == IFXUSB_EP_TYPE_CTRL)
++ {
++ if(_urb->transfer_flags && URB_NO_SETUP_DMA_MAP)
++ urbd->setup_buff = (uint8_t *) (KSEG1ADDR((uint32_t *)_urb->setup_dma));
++ else
++ urbd->setup_buff = (uint8_t *) _urb->setup_packet;
++ }
++ }
++ //local_irq_restore (flags);
++ SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
++ return retval;
++}
++
+diff --git a/drivers/usb/ifxhcd/ifxusb_cif.c b/drivers/usb/ifxhcd/ifxusb_cif.c
+new file mode 100644
+index 0000000..10b1292
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxusb_cif.c
+@@ -0,0 +1,1458 @@
++/*****************************************************************************
++ ** FILE NAME : ifxusb_cif.c
++ ** PROJECT : IFX USB sub-system V3
++ ** MODULES : IFX USB sub-system Host and Device driver
++ ** SRC VERSION : 1.0
++ ** DATE : 1/Jan/2009
++ ** AUTHOR : Chen, Howard
++ ** DESCRIPTION : The Core Interface provides basic services for accessing and
++ ** managing the IFX USB hardware. These services are used by both the
++ ** Host Controller Driver and the Peripheral Controller Driver.
++ *****************************************************************************/
++
++/*!
++ \file ifxusb_cif.c
++ \ingroup IFXUSB_DRIVER_V3
++ \brief This file contains the interface to the IFX USB Core.
++*/
++
++#include <linux/clk.h>
++#include <linux/version.h>
++#include "ifxusb_version.h"
++
++#include <asm/byteorder.h>
++#include <asm/unaligned.h>
++
++
++#include <linux/jiffies.h>
++#include <linux/platform_device.h>
++#include <linux/kernel.h>
++#include <linux/ioport.h>
++
++#if defined(__UEIP__)
++// #include <asm/ifx/ifx_pmu.h>
++// #include <ifx_pmu.h>
++#endif
++
++
++#include "ifxusb_plat.h"
++#include "ifxusb_regs.h"
++#include "ifxusb_cif.h"
++
++
++#ifdef __IS_DEVICE__
++ #include "ifxpcd.h"
++#endif
++
++#ifdef __IS_HOST__
++ #include "ifxhcd.h"
++#endif
++
++#include <linux/mm.h>
++
++#include <linux/gfp.h>
++
++#if defined(__UEIP__)
++// #include <asm/ifx/ifx_board.h>
++ //#include <ifx_board.h>
++#endif
++
++//#include <asm/ifx/ifx_gpio.h>
++//#include <ifx_gpio.h>
++#if defined(__UEIP__)
++// #include <asm/ifx/ifx_led.h>
++ //#include <ifx_led.h>
++#endif
++
++
++
++#if defined(__UEIP__)
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
++ #ifndef USB_CTRL_PMU_SETUP
++ #define USB_CTRL_PMU_SETUP(__x) USB0_CTRL_PMU_SETUP(__x)
++ #endif
++ #ifndef USB_PHY_PMU_SETUP
++ #define USB_PHY_PMU_SETUP(__x) USB0_PHY_PMU_SETUP(__x)
++ #endif
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
++#endif // defined(__UEIP__)
++
++/*!
++ \brief This function is called to allocate buffer of specified size.
++ The allocated buffer is mapped into DMA accessable address.
++ \param size Size in BYTE to be allocated
++ \param clear 0: don't do clear after buffer allocated, other: do clear to zero
++ \return 0/NULL: Fail; uncached pointer of allocated buffer
++ */
++void *ifxusb_alloc_buf(size_t size, int clear)
++{
++ uint32_t *cached,*uncached;
++ uint32_t totalsize,page;
++
++ if(!size)
++ return 0;
++
++ size=(size+3)&0xFFFFFFFC;
++ totalsize=size + 12;
++ page=get_order(totalsize);
++
++ cached = (void *) __get_free_pages(( GFP_ATOMIC | GFP_DMA), page);
++
++ if(!cached)
++ {
++ IFX_PRINT("%s Allocation Failed size:%d\n",__func__,size);
++ return NULL;
++ }
++
++ uncached = (uint32_t *)(KSEG1ADDR(cached));
++ if(clear)
++ memset(uncached, 0, totalsize);
++
++ *(uncached+0)=totalsize;
++ *(uncached+1)=page;
++ *(uncached+2)=(uint32_t)cached;
++ return (void *)(uncached+3);
++}
++
++
++/*!
++ \brief This function is called to free allocated buffer.
++ \param vaddr the uncached pointer of the buffer
++ */
++void ifxusb_free_buf(void *vaddr)
++{
++ uint32_t totalsize,page;
++ uint32_t *cached,*uncached;
++
++ if(vaddr != NULL)
++ {
++ uncached=vaddr;
++ uncached-=3;
++ totalsize=*(uncached+0);
++ page=*(uncached+1);
++ cached=(uint32_t *)(*(uncached+2));
++ if(totalsize && page==get_order(totalsize) && cached==(uint32_t *)(KSEG0ADDR(uncached)))
++ {
++ free_pages((unsigned long)cached, page);
++ return;
++ }
++ // the memory is not allocated by ifxusb_alloc_buf. Allowed but must be careful.
++ return;
++ }
++}
++
++
++
++/*!
++ \brief This function is called to initialize the IFXUSB CSR data
++ structures. The register addresses in the device and host
++ structures are initialized from the base address supplied by the
++ caller. The calling function must make the OS calls to get the
++ base address of the IFXUSB controller registers.
++
++ \param _core_if Pointer of core_if structure
++ \param _irq irq number
++ \param _reg_base_addr Base address of IFXUSB core registers
++ \param _fifo_base_addr Fifo base address
++ \param _fifo_dbg_addr Fifo debug address
++ \return 0: success;
++ */
++int ifxusb_core_if_init(ifxusb_core_if_t *_core_if,
++ int _irq,
++ uint32_t _reg_base_addr,
++ uint32_t _fifo_base_addr,
++ uint32_t _fifo_dbg_addr)
++{
++ int retval = 0;
++ uint32_t *reg_base =NULL;
++ uint32_t *fifo_base =NULL;
++ uint32_t *fifo_dbg =NULL;
++
++ int i;
++
++ IFX_DEBUGPL(DBG_CILV, "%s(%p,%d,0x%08X,0x%08X,0x%08X)\n", __func__,
++ _core_if,
++ _irq,
++ _reg_base_addr,
++ _fifo_base_addr,
++ _fifo_dbg_addr);
++
++ if( _core_if == NULL)
++ {
++ IFX_ERROR("%s() invalid _core_if\n", __func__);
++ retval = -ENOMEM;
++ goto fail;
++ }
++
++ //memset(_core_if, 0, sizeof(ifxusb_core_if_t));
++
++ _core_if->irq=_irq;
++
++ reg_base =ioremap_nocache(_reg_base_addr , IFXUSB_IOMEM_SIZE );
++ fifo_base =ioremap_nocache(_fifo_base_addr, IFXUSB_FIFOMEM_SIZE);
++ fifo_dbg =ioremap_nocache(_fifo_dbg_addr , IFXUSB_FIFODBG_SIZE);
++ if( reg_base == NULL || fifo_base == NULL || fifo_dbg == NULL)
++ {
++ IFX_ERROR("%s() usb ioremap() failed\n", __func__);
++ retval = -ENOMEM;
++ goto fail;
++ }
++
++ _core_if->core_global_regs = (ifxusb_core_global_regs_t *)reg_base;
++
++ /*
++ * Attempt to ensure this device is really a IFXUSB Controller.
++ * Read and verify the SNPSID register contents. The value should be
++ * 0x45F42XXX
++ */
++ {
++ int32_t snpsid;
++ snpsid = ifxusb_rreg(&_core_if->core_global_regs->gsnpsid);
++ if ((snpsid & 0xFFFFF000) != 0x4F542000)
++ {
++ IFX_ERROR("%s() snpsid error(0x%08x) failed\n", __func__,snpsid);
++ retval = -EINVAL;
++ goto fail;
++ }
++ _core_if->snpsid=snpsid;
++ }
++
++ #ifdef __IS_HOST__
++ _core_if->host_global_regs = (ifxusb_host_global_regs_t *)
++ ((uint32_t)reg_base + IFXUSB_HOST_GLOBAL_REG_OFFSET);
++ _core_if->hprt0 = (uint32_t*)((uint32_t)reg_base + IFXUSB_HOST_PORT_REGS_OFFSET);
++
++ for (i=0; i<MAX_EPS_CHANNELS; i++)
++ {
++ _core_if->hc_regs[i] = (ifxusb_hc_regs_t *)
++ ((uint32_t)reg_base + IFXUSB_HOST_CHAN_REGS_OFFSET +
++ (i * IFXUSB_CHAN_REGS_OFFSET));
++ IFX_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n",
++ i, &_core_if->hc_regs[i]->hcchar);
++ }
++ #endif //__IS_HOST__
++
++ #ifdef __IS_DEVICE__
++ _core_if->dev_global_regs =
++ (ifxusb_device_global_regs_t *)((uint32_t)reg_base + IFXUSB_DEV_GLOBAL_REG_OFFSET);
++
++ for (i=0; i<MAX_EPS_CHANNELS; i++)
++ {
++ _core_if->in_ep_regs[i] = (ifxusb_dev_in_ep_regs_t *)
++ ((uint32_t)reg_base + IFXUSB_DEV_IN_EP_REG_OFFSET +
++ (i * IFXUSB_EP_REG_OFFSET));
++ _core_if->out_ep_regs[i] = (ifxusb_dev_out_ep_regs_t *)
++ ((uint32_t)reg_base + IFXUSB_DEV_OUT_EP_REG_OFFSET +
++ (i * IFXUSB_EP_REG_OFFSET));
++ IFX_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p/%p %p/0x%08X/0x%08X\n",
++ i, &_core_if->in_ep_regs[i]->diepctl, _core_if->in_ep_regs[i],
++ reg_base,IFXUSB_DEV_IN_EP_REG_OFFSET,(i * IFXUSB_EP_REG_OFFSET)
++ );
++ IFX_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p/%p %p/0x%08X/0x%08X\n",
++ i, &_core_if->out_ep_regs[i]->doepctl, _core_if->out_ep_regs[i],
++ reg_base,IFXUSB_DEV_OUT_EP_REG_OFFSET,(i * IFXUSB_EP_REG_OFFSET)
++ );
++ }
++ #endif //__IS_DEVICE__
++
++ /* Setting the FIFO and other Address. */
++ for (i=0; i<MAX_EPS_CHANNELS; i++)
++ {
++ _core_if->data_fifo[i] = fifo_base + (i * IFXUSB_DATA_FIFO_SIZE);
++ IFX_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08x\n",
++ i, (unsigned)_core_if->data_fifo[i]);
++ }
++
++ _core_if->data_fifo_dbg = fifo_dbg;
++ _core_if->pcgcctl = (uint32_t*)(((uint32_t)reg_base) + IFXUSB_PCGCCTL_OFFSET);
++
++ /*
++ * Store the contents of the hardware configuration registers here for
++ * easy access later.
++ */
++ _core_if->hwcfg1.d32 = ifxusb_rreg(&_core_if->core_global_regs->ghwcfg1);
++ _core_if->hwcfg2.d32 = ifxusb_rreg(&_core_if->core_global_regs->ghwcfg2);
++ _core_if->hwcfg3.d32 = ifxusb_rreg(&_core_if->core_global_regs->ghwcfg3);
++ _core_if->hwcfg4.d32 = ifxusb_rreg(&_core_if->core_global_regs->ghwcfg4);
++
++ IFX_DEBUGPL(DBG_CILV,"hwcfg1=%08x\n",_core_if->hwcfg1.d32);
++ IFX_DEBUGPL(DBG_CILV,"hwcfg2=%08x\n",_core_if->hwcfg2.d32);
++ IFX_DEBUGPL(DBG_CILV,"hwcfg3=%08x\n",_core_if->hwcfg3.d32);
++ IFX_DEBUGPL(DBG_CILV,"hwcfg4=%08x\n",_core_if->hwcfg4.d32);
++
++
++ #ifdef __DED_FIFO__
++ IFX_PRINT("Waiting for PHY Clock Lock!\n");
++ while(!( ifxusb_rreg(&_core_if->core_global_regs->grxfsiz) & (1<<9)))
++ {
++ }
++ IFX_PRINT("PHY Clock Locked!\n");
++ //ifxusb_clean_spram(_core_if,128*1024/4);
++ #endif
++
++ /* Create new workqueue and init works */
++#if 0
++ _core_if->wq_usb = create_singlethread_workqueue(_core_if->core_name);
++
++ if(_core_if->wq_usb == 0)
++ {
++ IFX_DEBUGPL(DBG_CIL, "Creation of wq_usb failed\n");
++ retval = -EINVAL;
++ goto fail;
++ }
++
++ #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++ INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change, core_if);
++ INIT_WORK(&core_if->w_wkp, w_wakeup_detected, core_if);
++ #else
++ INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change);
++ INIT_DELAYED_WORK(&core_if->w_wkp, w_wakeup_detected);
++ #endif
++#endif
++ return 0;
++
++fail:
++ if( reg_base != NULL) iounmap(reg_base );
++ if( fifo_base != NULL) iounmap(fifo_base);
++ if( fifo_dbg != NULL) iounmap(fifo_dbg );
++ return retval;
++}
++
++/*!
++ \brief This function free the mapped address in the IFXUSB CSR data structures.
++ \param _core_if Pointer of core_if structure
++ */
++void ifxusb_core_if_remove(ifxusb_core_if_t *_core_if)
++{
++ /* Disable all interrupts */
++ if( _core_if->core_global_regs != NULL)
++ {
++ ifxusb_mreg( &_core_if->core_global_regs->gahbcfg, 1, 0);
++ ifxusb_wreg( &_core_if->core_global_regs->gintmsk, 0);
++ }
++
++ if( _core_if->core_global_regs != NULL) iounmap(_core_if->core_global_regs );
++ if( _core_if->data_fifo[0] != NULL) iounmap(_core_if->data_fifo[0] );
++ if( _core_if->data_fifo_dbg != NULL) iounmap(_core_if->data_fifo_dbg );
++
++#if 0
++ if (_core_if->wq_usb)
++ destroy_workqueue(_core_if->wq_usb);
++#endif
++ memset(_core_if, 0, sizeof(ifxusb_core_if_t));
++}
++
++
++
++
++/*!
++ \brief This function enbles the controller's Global Interrupt in the AHB Config register.
++ \param _core_if Pointer of core_if structure
++ */
++void ifxusb_enable_global_interrupts( ifxusb_core_if_t *_core_if )
++{
++ gahbcfg_data_t ahbcfg ={ .d32 = 0};
++ ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
++ ifxusb_mreg(&_core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32);
++}
++
++/*!
++ \brief This function disables the controller's Global Interrupt in the AHB Config register.
++ \param _core_if Pointer of core_if structure
++ */
++void ifxusb_disable_global_interrupts( ifxusb_core_if_t *_core_if )
++{
++ gahbcfg_data_t ahbcfg ={ .d32 = 0};
++ ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
++ ifxusb_mreg(&_core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
++}
++
++
++
++
++/*!
++ \brief Flush Tx and Rx FIFO.
++ \param _core_if Pointer of core_if structure
++ */
++void ifxusb_flush_both_fifo( ifxusb_core_if_t *_core_if )
++{
++ ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
++ volatile grstctl_t greset ={ .d32 = 0};
++ int count = 0;
++
++ IFX_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__);
++ greset.b.rxfflsh = 1;
++ greset.b.txfflsh = 1;
++ greset.b.txfnum = 0x10;
++ greset.b.intknqflsh=1;
++ greset.b.hstfrm=1;
++ ifxusb_wreg( &global_regs->grstctl, greset.d32 );
++
++ do
++ {
++ greset.d32 = ifxusb_rreg( &global_regs->grstctl);
++ if (++count > 10000)
++ {
++ IFX_WARN("%s() HANG! GRSTCTL=%0x\n", __func__, greset.d32);
++ break;
++ }
++ } while (greset.b.rxfflsh == 1 || greset.b.txfflsh == 1);
++ /* Wait for 3 PHY Clocks*/
++ UDELAY(1);
++}
++
++/*!
++ \brief Flush a Tx FIFO.
++ \param _core_if Pointer of core_if structure
++ \param _num Tx FIFO to flush. ( 0x10 for ALL TX FIFO )
++ */
++void ifxusb_flush_tx_fifo( ifxusb_core_if_t *_core_if, const int _num )
++{
++ ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
++ volatile grstctl_t greset ={ .d32 = 0};
++ int count = 0;
++
++ IFX_DEBUGPL((DBG_CIL|DBG_PCDV), "Flush Tx FIFO %d\n", _num);
++
++ greset.b.intknqflsh=1;
++ greset.b.txfflsh = 1;
++ greset.b.txfnum = _num;
++ ifxusb_wreg( &global_regs->grstctl, greset.d32 );
++
++ do
++ {
++ greset.d32 = ifxusb_rreg( &global_regs->grstctl);
++ if (++count > 10000&&(_num==0 ||_num==0x10))
++ {
++ IFX_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
++ __func__, greset.d32,
++ ifxusb_rreg( &global_regs->gnptxsts));
++ break;
++ }
++ } while (greset.b.txfflsh == 1);
++ /* Wait for 3 PHY Clocks*/
++ UDELAY(1);
++}
++
++
++/*!
++ \brief Flush Rx FIFO.
++ \param _core_if Pointer of core_if structure
++ */
++void ifxusb_flush_rx_fifo( ifxusb_core_if_t *_core_if )
++{
++ ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
++ volatile grstctl_t greset ={ .d32 = 0};
++ int count = 0;
++
++ IFX_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__);
++ greset.b.rxfflsh = 1;
++ ifxusb_wreg( &global_regs->grstctl, greset.d32 );
++
++ do
++ {
++ greset.d32 = ifxusb_rreg( &global_regs->grstctl);
++ if (++count > 10000)
++ {
++ IFX_WARN("%s() HANG! GRSTCTL=%0x\n", __func__, greset.d32);
++ break;
++ }
++ } while (greset.b.rxfflsh == 1);
++ /* Wait for 3 PHY Clocks*/
++ UDELAY(1);
++}
++
++
++#define SOFT_RESET_DELAY 100
++
++/*!
++ \brief Do a soft reset of the core. Be careful with this because it
++ resets all the internal state machines of the core.
++ \param _core_if Pointer of core_if structure
++ */
++int ifxusb_core_soft_reset(ifxusb_core_if_t *_core_if)
++{
++ ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
++ volatile grstctl_t greset ={ .d32 = 0};
++ int count = 0;
++
++ IFX_DEBUGPL(DBG_CILV, "%s\n", __func__);
++ /* Wait for AHB master IDLE state. */
++ do
++ {
++ UDELAY(10);
++ greset.d32 = ifxusb_rreg( &global_regs->grstctl);
++ if (++count > 100000)
++ {
++ IFX_WARN("%s() HANG! AHB Idle GRSTCTL=%0x %x\n", __func__,
++ greset.d32, greset.b.ahbidle);
++ break;
++ }
++ } while (greset.b.ahbidle == 0);
++
++ UDELAY(1);
++
++ /* Core Soft Reset */
++ count = 0;
++ greset.b.csftrst = 1;
++ ifxusb_wreg( &global_regs->grstctl, greset.d32 );
++
++ #ifdef SOFT_RESET_DELAY
++ MDELAY(SOFT_RESET_DELAY);
++ #endif
++
++ do
++ {
++ UDELAY(10);
++ greset.d32 = ifxusb_rreg( &global_regs->grstctl);
++ if (++count > 100000)
++ {
++ IFX_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", __func__, greset.d32);
++ return -1;
++ }
++ } while (greset.b.csftrst == 1);
++
++ #ifdef SOFT_RESET_DELAY
++ MDELAY(SOFT_RESET_DELAY);
++ #endif
++
++
++ #if defined(__IS_VR9__)
++ if(_core_if->core_no==0)
++ {
++ set_bit (4, VR9_RCU_USBRESET2);
++ MDELAY(50);
++ clear_bit (4, VR9_RCU_USBRESET2);
++ }
++ else
++ {
++ set_bit (5, VR9_RCU_USBRESET2);
++ MDELAY(50);
++ clear_bit (5, VR9_RCU_USBRESET2);
++ }
++ MDELAY(50);
++ #endif //defined(__IS_VR9__)
++
++ IFX_PRINT("USB core #%d soft-reset\n",_core_if->core_no);
++
++ return 0;
++}
++
++/*!
++ \brief Turn on the USB Core Power
++ \param _core_if Pointer of core_if structure
++*/
++void ifxusb_power_on (ifxusb_core_if_t *_core_if)
++{
++ struct clk *clk0 = clk_get_sys("usb0", NULL);
++ struct clk *clk1 = clk_get_sys("usb1", NULL);
++ // set clock gating
++ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++ #if defined(__UEIP__)
++
++ #if defined(__IS_TWINPASS) || defined(__IS_DANUBE__)
++ set_bit (4, (volatile unsigned long *)DANUBE_CGU_IFCCR);
++ set_bit (5, (volatile unsigned long *)DANUBE_CGU_IFCCR);
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ #if defined(__IS_AMAZON_SE__)
++ // clear_bit (4, (volatile unsigned long *)AMAZON_SE_CGU_IFCCR);
++ clear_bit (5, (volatile unsigned long *)AMAZON_SE_CGU_IFCCR);
++ #endif //defined(__IS_AMAZON_SE__)
++ #if defined(__IS_AR9__)
++ set_bit (0, (volatile unsigned long *)AR9_CGU_IFCCR);
++ set_bit (1, (volatile unsigned long *)AR9_CGU_IFCCR);
++ #endif //defined(__IS_AR9__)
++ #if defined(__IS_VR9__)
++// set_bit (0, (volatile unsigned long *)VR9_CGU_IFCCR);
++// set_bit (1, (volatile unsigned long *)VR9_CGU_IFCCR);
++ #endif //defined(__IS_VR9__)
++
++ MDELAY(50);
++
++ // set power
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
++ USB_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
++ //#if defined(__IS_TWINPASS__)
++ // ifxusb_enable_afe_oc();
++ //#endif
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
++ #if defined(__IS_AR9__) || defined(__IS_VR9__)
++ if(_core_if->core_no==0)
++ clk_enable(clk0);
++// USB0_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
++ else
++ clk_enable(clk1);
++// USB1_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
++ #endif //defined(__IS_AR9__) || defined(__IS_VR9__)
++
++ if(_core_if->core_global_regs)
++ {
++ // PHY configurations.
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ #if defined(__IS_AMAZON_SE__)
++ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_AMAZON_SE__)
++ #if defined(__IS_AR9__)
++ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_AR9__)
++ #if defined(__IS_VR9__)
++ //ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_VR9__)
++ }
++ #else //defined(__UEIP__)
++ #if defined(__IS_TWINPASS) || defined(__IS_DANUBE__)
++ set_bit (4, (volatile unsigned long *)DANUBE_CGU_IFCCR);
++ set_bit (5, (volatile unsigned long *)DANUBE_CGU_IFCCR);
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ #if defined(__IS_AMAZON_SE__)
++ // clear_bit (4, (volatile unsigned long *)AMAZON_SE_CGU_IFCCR);
++ clear_bit (5, (volatile unsigned long *)AMAZON_SE_CGU_IFCCR);
++ #endif //defined(__IS_AMAZON_SE__)
++ #if defined(__IS_AR9__)
++ set_bit (0, (volatile unsigned long *)AMAZON_S_CGU_IFCCR);
++ set_bit (1, (volatile unsigned long *)AMAZON_S_CGU_IFCCR);
++ #endif //defined(__IS_AR9__)
++
++ MDELAY(50);
++
++ // set power
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ clear_bit (6, (volatile unsigned long *)DANUBE_PMU_PWDCR);//USB
++ clear_bit (9, (volatile unsigned long *)DANUBE_PMU_PWDCR);//DSL
++ clear_bit (15, (volatile unsigned long *)DANUBE_PMU_PWDCR);//AHB
++ #if defined(__IS_TWINPASS__)
++ ifxusb_enable_afe_oc();
++ #endif
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ #if defined(__IS_AMAZON_SE__)
++ clear_bit (6, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);
++ clear_bit (9, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);
++ clear_bit (15, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);
++ #endif //defined(__IS_AMAZON_SE__)
++ #if defined(__IS_AR9__)
++ if(_core_if->core_no==0)
++ clear_bit (6, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//USB
++ else
++ clear_bit (27, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//USB
++ clear_bit (9, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//DSL
++ clear_bit (15, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//AHB
++ #endif //defined(__IS_AR9__)
++
++ if(_core_if->core_global_regs)
++ {
++ // PHY configurations.
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ #if defined(__IS_AMAZON_SE__)
++ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_AMAZON_SE__)
++ #if defined(__IS_AR9__)
++ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_AR9__)
++ }
++
++ #endif //defined(__UEIP__)
++}
++
++/*!
++ \brief Turn off the USB Core Power
++ \param _core_if Pointer of core_if structure
++*/
++void ifxusb_power_off (ifxusb_core_if_t *_core_if)
++{
++ struct clk *clk0 = clk_get_sys("usb0", NULL);
++ struct clk *clk1 = clk_get_sys("usb1", NULL);
++ ifxusb_phy_power_off (_core_if);
++
++ // set power
++ #if defined(__UEIP__)
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
++ USB_CTRL_PMU_SETUP(IFX_PMU_DISABLE);
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
++ #if defined(__IS_AR9__) || defined(__IS_VR9__)
++ if(_core_if->core_no==0)
++ clk_disable(clk0);
++ //USB0_CTRL_PMU_SETUP(IFX_PMU_DISABLE);
++ else
++ clk_disable(clk1);
++ //USB1_CTRL_PMU_SETUP(IFX_PMU_DISABLE);
++ #endif //defined(__IS_AR9__) || defined(__IS_VR9__)
++ #else //defined(__UEIP__)
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ set_bit (6, (volatile unsigned long *)DANUBE_PMU_PWDCR);//USB
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ #if defined(__IS_AMAZON_SE__)
++ set_bit (6, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);//USB
++ #endif //defined(__IS_AMAZON_SE__)
++ #if defined(__IS_AR9__)
++ if(_core_if->core_no==0)
++ set_bit (6, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//USB
++ else
++ set_bit (27, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//USB
++ #endif //defined(__IS_AR9__)
++ #endif //defined(__UEIP__)
++}
++
++/*!
++ \brief Turn on the USB PHY Power
++ \param _core_if Pointer of core_if structure
++*/
++void ifxusb_phy_power_on (ifxusb_core_if_t *_core_if)
++{
++ struct clk *clk0 = clk_get_sys("usb0", NULL);
++ struct clk *clk1 = clk_get_sys("usb1", NULL);
++ #if defined(__UEIP__)
++ if(_core_if->core_global_regs)
++ {
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ #if defined(__IS_AMAZON_SE__)
++ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_AMAZON_SE__)
++ #if defined(__IS_AR9__)
++ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_AR9__)
++ #if defined(__IS_VR9_S__)
++ if(_core_if->core_no==0)
++ set_bit (0, VR9_RCU_USB_ANA_CFG1A);
++ else
++ set_bit (0, VR9_RCU_USB_ANA_CFG1B);
++ #endif //defined(__IS_VR9__)
++ }
++
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
++ USB_PHY_PMU_SETUP(IFX_PMU_ENABLE);
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
++ #if defined(__IS_AR9__) || defined(__IS_VR9__)
++ if(_core_if->core_no==0)
++ clk_enable(clk0);
++ //USB0_PHY_PMU_SETUP(IFX_PMU_ENABLE);
++ else
++ clk_enable(clk1);
++ //USB1_PHY_PMU_SETUP(IFX_PMU_ENABLE);
++ #endif //defined(__IS_AR9__) || defined(__IS_VR9__)
++
++ // PHY configurations.
++ if(_core_if->core_global_regs)
++ {
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ #if defined(__IS_AMAZON_SE__)
++ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_AMAZON_SE__)
++ #if defined(__IS_AR9__)
++ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_AR9__)
++ #if defined(__IS_VR9_S__)
++ if(_core_if->core_no==0)
++ set_bit (0, VR9_RCU_USB_ANA_CFG1A);
++ else
++ set_bit (0, VR9_RCU_USB_ANA_CFG1B);
++ #endif //defined(__IS_VR9__)
++ }
++ #else //defined(__UEIP__)
++ // PHY configurations.
++ if(_core_if->core_global_regs)
++ {
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ #if defined(__IS_AMAZON_SE__)
++ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_AMAZON_SE__)
++ #if defined(__IS_AR9__)
++ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_AR9__)
++ }
++
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ clear_bit (0, (volatile unsigned long *)DANUBE_PMU_PWDCR);//PHY
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ #if defined(__IS_AMAZON_SE__)
++ clear_bit (0, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);
++ #endif //defined(__IS_AMAZON_SE__)
++ #if defined(__IS_AR9__)
++ if(_core_if->core_no==0)
++ clear_bit (0, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//PHY
++ else
++ clear_bit (26, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//PHY
++ #endif //defined(__IS_AR9__)
++
++ // PHY configurations.
++ if(_core_if->core_global_regs)
++ {
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ #if defined(__IS_AMAZON_SE__)
++ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_AMAZON_SE__)
++ #if defined(__IS_AR9__)
++ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_AR9__)
++ }
++ #endif //defined(__UEIP__)
++}
++
++
++/*!
++ \brief Turn off the USB PHY Power
++ \param _core_if Pointer of core_if structure
++*/
++void ifxusb_phy_power_off (ifxusb_core_if_t *_core_if)
++{
++ struct clk *clk0 = clk_get_sys("usb0", NULL);
++ struct clk *clk1 = clk_get_sys("usb1", NULL);
++ #if defined(__UEIP__)
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
++ USB_PHY_PMU_SETUP(IFX_PMU_DISABLE);
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
++ #if defined(__IS_AR9__) || defined(__IS_VR9__)
++ if(_core_if->core_no==0)
++ clk_disable(clk0);
++ //USB0_PHY_PMU_SETUP(IFX_PMU_DISABLE);
++ else
++ clk_disable(clk1);
++ //USB1_PHY_PMU_SETUP(IFX_PMU_DISABLE);
++ #endif // defined(__IS_AR9__) || defined(__IS_VR9__)
++ #else //defined(__UEIP__)
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ set_bit (0, (volatile unsigned long *)DANUBE_PMU_PWDCR);//PHY
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ #if defined(__IS_AMAZON_SE__)
++ set_bit (0, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);//PHY
++ #endif //defined(__IS_AMAZON_SE__)
++ #if defined(__IS_AR9__)
++ if(_core_if->core_no==0)
++ set_bit (0, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//PHY
++ else
++ set_bit (26, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//PHY
++ #endif //defined(__IS_AR9__)
++ #endif //defined(__UEIP__)
++}
++
++
++/*!
++ \brief Reset on the USB Core RCU
++ \param _core_if Pointer of core_if structure
++ */
++#if defined(__IS_VR9__)
++ int already_hard_reset=0;
++#endif
++void ifxusb_hard_reset(ifxusb_core_if_t *_core_if)
++{
++ #if defined(__UEIP__)
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ #if defined (__IS_HOST__)
++ clear_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
++ #elif defined (__IS_DEVICE__)
++ set_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
++ #endif
++ #endif //defined(__IS_AMAZON_SE__)
++
++ #if defined(__IS_AMAZON_SE__)
++ #if defined (__IS_HOST__)
++ clear_bit (AMAZON_SE_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
++ #elif defined (__IS_DEVICE__)
++ set_bit (AMAZON_SE_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
++ #endif
++ #endif //defined(__IS_AMAZON_SE__)
++
++ #if defined(__IS_AR9__)
++ if(_core_if->core_no==0)
++ {
++ #if defined (__IS_HOST__)
++ clear_bit (AR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)AR9_RCU_USB1CFG);
++ #elif defined (__IS_DEVICE__)
++ set_bit (AR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)AR9_RCU_USB1CFG);
++ #endif
++ }
++ else
++ {
++ #if defined (__IS_HOST__)
++ clear_bit (AR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)AR9_RCU_USB2CFG);
++ #elif defined (__IS_DEVICE__)
++ set_bit (AR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)AR9_RCU_USB2CFG);
++ #endif
++ }
++ #endif //defined(__IS_AR9__)
++
++ #if defined(__IS_VR9__)
++ if(_core_if->core_no==0)
++ {
++ #if defined (__IS_HOST__)
++ clear_bit (VR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)VR9_RCU_USB1CFG);
++ #elif defined (__IS_DEVICE__)
++ set_bit (VR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)VR9_RCU_USB1CFG);
++ #endif
++ }
++ else
++ {
++ #if defined (__IS_HOST__)
++ clear_bit (VR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)VR9_RCU_USB2CFG);
++ #elif defined (__IS_DEVICE__)
++ set_bit (VR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)VR9_RCU_USB2CFG);
++ #endif
++ }
++ #endif //defined(__IS_VR9__)
++
++
++ // set the HC's byte-order to big-endian
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ set_bit (DANUBE_USBCFG_HOST_END_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
++ clear_bit (DANUBE_USBCFG_SLV_END_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ #if defined(__IS_AMAZON_SE__)
++ set_bit (AMAZON_SE_USBCFG_HOST_END_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
++ clear_bit (AMAZON_SE_USBCFG_SLV_END_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
++ #endif //defined(__IS_AMAZON_SE__)
++ #if defined(__IS_AR9__)
++ if(_core_if->core_no==0)
++ {
++ set_bit (AR9_USBCFG_HOST_END_BIT, (volatile unsigned long *)AR9_RCU_USB1CFG);
++ clear_bit (AR9_USBCFG_SLV_END_BIT, (volatile unsigned long *)AR9_RCU_USB1CFG);
++ }
++ else
++ {
++ set_bit (AR9_USBCFG_HOST_END_BIT, (volatile unsigned long *)AR9_RCU_USB2CFG);
++ clear_bit (AR9_USBCFG_SLV_END_BIT, (volatile unsigned long *)AR9_RCU_USB2CFG);
++ }
++ #endif //defined(__IS_AR9__)
++ #if defined(__IS_VR9__)
++ if(_core_if->core_no==0)
++ {
++ set_bit (VR9_USBCFG_HOST_END_BIT, (volatile unsigned long *)VR9_RCU_USB1CFG);
++ clear_bit (VR9_USBCFG_SLV_END_BIT, (volatile unsigned long *)VR9_RCU_USB1CFG);
++ }
++ else
++ {
++ set_bit (VR9_USBCFG_HOST_END_BIT, (volatile unsigned long *)VR9_RCU_USB2CFG);
++ clear_bit (VR9_USBCFG_SLV_END_BIT, (volatile unsigned long *)VR9_RCU_USB2CFG);
++ }
++ #endif //defined(__IS_VR9__)
++
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ set_bit (4, DANUBE_RCU_RESET);
++ MDELAY(500);
++ clear_bit (4, DANUBE_RCU_RESET);
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++
++ #if defined(__IS_AMAZON_SE__)
++ set_bit (4, AMAZON_SE_RCU_RESET);
++ MDELAY(500);
++ clear_bit (4, AMAZON_SE_RCU_RESET);
++ MDELAY(500);
++ #endif //defined(__IS_AMAZON_SE__)
++
++ #if defined(__IS_AR9__)
++ if(_core_if->core_no==0)
++ {
++ set_bit (4, AR9_RCU_USBRESET);
++ MDELAY(500);
++ clear_bit (4, AR9_RCU_USBRESET);
++ }
++ else
++ {
++ set_bit (28, AR9_RCU_USBRESET);
++ MDELAY(500);
++ clear_bit (28, AR9_RCU_USBRESET);
++ }
++ MDELAY(500);
++ #endif //defined(__IS_AR9__)
++ #if defined(__IS_VR9__)
++ if(!already_hard_reset)
++ {
++ set_bit (4, VR9_RCU_USBRESET);
++ MDELAY(500);
++ clear_bit (4, VR9_RCU_USBRESET);
++ MDELAY(500);
++ already_hard_reset=1;
++ }
++ #endif //defined(__IS_VR9__)
++
++ #if defined(__IS_TWINPASS__)
++ ifxusb_enable_afe_oc();
++ #endif
++
++ if(_core_if->core_global_regs)
++ {
++ // PHY configurations.
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ #if defined(__IS_AMAZON_SE__)
++ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_AMAZON_SE__)
++ #if defined(__IS_AR9__)
++ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_AR9__)
++ #if defined(__IS_VR9__)
++ // ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_VR9__)
++ }
++ #else //defined(__UEIP__)
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ #if defined (__IS_HOST__)
++ clear_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
++ #elif defined (__IS_DEVICE__)
++ set_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
++ #endif
++ #endif //defined(__IS_AMAZON_SE__)
++
++ #if defined(__IS_AMAZON_SE__)
++ #if defined (__IS_HOST__)
++ clear_bit (AMAZON_SE_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
++ #elif defined (__IS_DEVICE__)
++ set_bit (AMAZON_SE_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
++ #endif
++ #endif //defined(__IS_AMAZON_SE__)
++
++ #if defined(__IS_AR9__)
++ if(_core_if->core_no==0)
++ {
++ #if defined (__IS_HOST__)
++ clear_bit (AMAZON_S_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB1CFG);
++ #elif defined (__IS_DEVICE__)
++ set_bit (AMAZON_S_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB1CFG);
++ #endif
++ }
++ else
++ {
++ #if defined (__IS_HOST__)
++ clear_bit (AMAZON_S_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB2CFG);
++ #elif defined (__IS_DEVICE__)
++ set_bit (AMAZON_S_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB2CFG);
++ #endif
++ }
++ #endif //defined(__IS_AR9__)
++
++ // set the HC's byte-order to big-endian
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ set_bit (DANUBE_USBCFG_HOST_END_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
++ clear_bit (DANUBE_USBCFG_SLV_END_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ #if defined(__IS_AMAZON_SE__)
++ set_bit (AMAZON_SE_USBCFG_HOST_END_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
++ clear_bit (AMAZON_SE_USBCFG_SLV_END_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
++ #endif //defined(__IS_AMAZON_SE__)
++ #if defined(__IS_AR9__)
++ if(_core_if->core_no==0)
++ {
++ set_bit (AMAZON_S_USBCFG_HOST_END_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB1CFG);
++ clear_bit (AMAZON_S_USBCFG_SLV_END_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB1CFG);
++ }
++ else
++ {
++ set_bit (AMAZON_S_USBCFG_HOST_END_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB2CFG);
++ clear_bit (AMAZON_S_USBCFG_SLV_END_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB2CFG);
++ }
++ #endif //defined(__IS_AR9__)
++
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ set_bit (4, DANUBE_RCU_RESET);
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ #if defined(__IS_AMAZON_SE__)
++ set_bit (4, AMAZON_SE_RCU_RESET);
++ #endif //defined(__IS_AMAZON_SE__)
++ #if defined(__IS_AR9__)
++ if(_core_if->core_no==0)
++ {
++ set_bit (4, AMAZON_S_RCU_USBRESET);
++ }
++ else
++ {
++ set_bit (28, AMAZON_S_RCU_USBRESET);
++ }
++ #endif //defined(__IS_AR9__)
++
++ MDELAY(500);
++
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ clear_bit (4, DANUBE_RCU_RESET);
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ #if defined(__IS_AMAZON_SE__)
++ clear_bit (4, AMAZON_SE_RCU_RESET);
++ #endif //defined(__IS_AMAZON_SE__)
++ #if defined(__IS_AR9__)
++ if(_core_if->core_no==0)
++ {
++ clear_bit (4, AMAZON_S_RCU_USBRESET);
++ }
++ else
++ {
++ clear_bit (28, AMAZON_S_RCU_USBRESET);
++ }
++ #endif //defined(__IS_AR9__)
++
++ MDELAY(500);
++
++ #if defined(__IS_TWINPASS__)
++ ifxusb_enable_afe_oc();
++ #endif
++
++ if(_core_if->core_global_regs)
++ {
++ // PHY configurations.
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ #if defined(__IS_AMAZON_SE__)
++ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_AMAZON_SE__)
++ #if defined(__IS_AR9__)
++ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
++ #endif //defined(__IS_AR9__)
++ }
++ #endif //defined(__UEIP__)
++}
++
++#if defined(__GADGET_LED__) || defined(__HOST_LED__)
++ #if defined(__UEIP__)
++ static void *g_usb_led_trigger = NULL;
++ #endif
++
++ void ifxusb_led_init(ifxusb_core_if_t *_core_if)
++ {
++ #if defined(__UEIP__)
++ if ( !g_usb_led_trigger )
++ {
++ ifx_led_trigger_register("usb_link", &g_usb_led_trigger);
++ if ( g_usb_led_trigger != NULL )
++ {
++ struct ifx_led_trigger_attrib attrib = {0};
++ attrib.delay_on = 250;
++ attrib.delay_off = 250;
++ attrib.timeout = 2000;
++ attrib.def_value = 1;
++ attrib.flags = IFX_LED_TRIGGER_ATTRIB_DELAY_ON | IFX_LED_TRIGGER_ATTRIB_DELAY_OFF | IFX_LED_TRIGGER_ATTRIB_TIMEOUT | IFX_LED_TRIGGER_ATTRIB_DEF_VALUE;
++ IFX_DEBUGP("Reg USB LED!!\n");
++ ifx_led_trigger_set_attrib(g_usb_led_trigger, &attrib);
++ }
++ }
++ #endif //defined(__UEIP__)
++ }
++
++ void ifxusb_led_free(ifxusb_core_if_t *_core_if)
++ {
++ #if defined(__UEIP__)
++ if ( g_usb_led_trigger )
++ {
++ ifx_led_trigger_deregister(g_usb_led_trigger);
++ g_usb_led_trigger = NULL;
++ }
++ #endif //defined(__UEIP__)
++ }
++
++ /*!
++ \brief Turn off the USB 5V VBus Power
++ \param _core_if Pointer of core_if structure
++ */
++ void ifxusb_led(ifxusb_core_if_t *_core_if)
++ {
++ #if defined(__UEIP__)
++ if(g_usb_led_trigger)
++ ifx_led_trigger_activate(g_usb_led_trigger);
++ #else
++ #endif //defined(__UEIP__)
++ }
++#endif // defined(__GADGET_LED__) || defined(__HOST_LED__)
++
++
++
++#if defined(__IS_HOST__) && defined(__DO_OC_INT__) && defined(__DO_OC_INT_ENABLE__)
++/*!
++ \brief Turn on the OC Int
++ */
++ void ifxusb_oc_int_on()
++ {
++ #if defined(__UEIP__)
++ #else
++ #if defined(__IS_TWINPASS__)
++ irq_enable(DANUBE_USB_OC_INT);
++ #endif
++ #endif //defined(__UEIP__)
++ }
++/*!
++ \brief Turn off the OC Int
++ */
++ void ifxusb_oc_int_off()
++ {
++ #if defined(__UEIP__)
++ #else
++ #if defined(__IS_TWINPASS__)
++ irq_disable(DANUBE_USB_OC_INT);
++ #endif
++ #endif //defined(__UEIP__)
++ }
++#endif //defined(__IS_HOST__) && defined(__DO_OC_INT__) && defined(__DO_OC_INT_ENABLE__)
++
++/* internal routines for debugging */
++void ifxusb_dump_msg(const u8 *buf, unsigned int length)
++{
++#ifdef __DEBUG__
++ unsigned int start, num, i;
++ char line[52], *p;
++
++ if (length >= 512)
++ return;
++ start = 0;
++ while (length > 0)
++ {
++ num = min(length, 16u);
++ p = line;
++ for (i = 0; i < num; ++i)
++ {
++ if (i == 8)
++ *p++ = ' ';
++ sprintf(p, " %02x", buf[i]);
++ p += 3;
++ }
++ *p = 0;
++ IFX_PRINT( "%6x: %s\n", start, line);
++ buf += num;
++ start += num;
++ length -= num;
++ }
++#endif
++}
++
++/* This functions reads the SPRAM and prints its content */
++void ifxusb_dump_spram(ifxusb_core_if_t *_core_if)
++{
++#ifdef __ENABLE_DUMP__
++ volatile uint8_t *addr, *start_addr, *end_addr;
++ uint32_t size;
++ IFX_PRINT("SPRAM Data:\n");
++ start_addr = (void*)_core_if->core_global_regs;
++ IFX_PRINT("Base Address: 0x%8X\n", (uint32_t)start_addr);
++
++ start_addr = (void*)_core_if->data_fifo_dbg;
++ IFX_PRINT("Starting Address: 0x%8X\n", (uint32_t)start_addr);
++
++ size=_core_if->hwcfg3.b.dfifo_depth;
++ size<<=2;
++ size+=0x200;
++ size&=0x0003FFFC;
++
++ end_addr = (void*)_core_if->data_fifo_dbg;
++ end_addr += size;
++
++ for(addr = start_addr; addr < end_addr; addr+=16)
++ {
++ IFX_PRINT("0x%8X:\t%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X\n", (uint32_t)addr,
++ addr[ 0], addr[ 1], addr[ 2], addr[ 3],
++ addr[ 4], addr[ 5], addr[ 6], addr[ 7],
++ addr[ 8], addr[ 9], addr[10], addr[11],
++ addr[12], addr[13], addr[14], addr[15]
++ );
++ }
++ return;
++#endif //__ENABLE_DUMP__
++}
++
++
++
++
++/* This function reads the core global registers and prints them */
++void ifxusb_dump_registers(ifxusb_core_if_t *_core_if)
++{
++#ifdef __ENABLE_DUMP__
++ int i;
++ volatile uint32_t *addr;
++ #ifdef __IS_DEVICE__
++ volatile uint32_t *addri,*addro;
++ #endif
++
++ IFX_PRINT("Core Global Registers\n");
++ addr=&_core_if->core_global_regs->gotgctl;
++ IFX_PRINT("GOTGCTL @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->core_global_regs->gotgint;
++ IFX_PRINT("GOTGINT @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->core_global_regs->gahbcfg;
++ IFX_PRINT("GAHBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->core_global_regs->gusbcfg;
++ IFX_PRINT("GUSBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->core_global_regs->grstctl;
++ IFX_PRINT("GRSTCTL @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->core_global_regs->gintsts;
++ IFX_PRINT("GINTSTS @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->core_global_regs->gintmsk;
++ IFX_PRINT("GINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->core_global_regs->gi2cctl;
++ IFX_PRINT("GI2CCTL @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->core_global_regs->gpvndctl;
++ IFX_PRINT("GPVNDCTL @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->core_global_regs->ggpio;
++ IFX_PRINT("GGPIO @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->core_global_regs->guid;
++ IFX_PRINT("GUID @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->core_global_regs->gsnpsid;
++ IFX_PRINT("GSNPSID @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->core_global_regs->ghwcfg1;
++ IFX_PRINT("GHWCFG1 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->core_global_regs->ghwcfg2;
++ IFX_PRINT("GHWCFG2 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->core_global_regs->ghwcfg3;
++ IFX_PRINT("GHWCFG3 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->core_global_regs->ghwcfg4;
++ IFX_PRINT("GHWCFG4 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++
++ addr=_core_if->pcgcctl;
++ IFX_PRINT("PCGCCTL @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++
++ addr=&_core_if->core_global_regs->grxfsiz;
++ IFX_PRINT("GRXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++
++ #ifdef __IS_HOST__
++ addr=&_core_if->core_global_regs->gnptxfsiz;
++ IFX_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->core_global_regs->hptxfsiz;
++ IFX_PRINT("HPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ #endif //__IS_HOST__
++
++ #ifdef __IS_DEVICE__
++ #ifdef __DED_FIFO__
++ addr=&_core_if->core_global_regs->gnptxfsiz;
++ IFX_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ for (i=0; i<= _core_if->hwcfg4.b.num_in_eps; i++)
++ {
++ addr=&_core_if->core_global_regs->dptxfsiz_dieptxf[i];
++ IFX_PRINT("DPTXFSIZ[%d] @0x%08X : 0x%08X\n",i,(uint32_t)addr,ifxusb_rreg(addr));
++ }
++ #else
++ addr=&_core_if->core_global_regs->gnptxfsiz;
++ IFX_PRINT("TXFSIZ[00] @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ for (i=0; i< _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
++ {
++ addr=&_core_if->core_global_regs->dptxfsiz_dieptxf[i];
++ IFX_PRINT("TXFSIZ[%02d] @0x%08X : 0x%08X\n",i+1,(uint32_t)addr,ifxusb_rreg(addr));
++ }
++ #endif
++ #endif //__IS_DEVICE__
++
++ #ifdef __IS_HOST__
++ IFX_PRINT("Host Global Registers\n");
++ addr=&_core_if->host_global_regs->hcfg;
++ IFX_PRINT("HCFG @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->host_global_regs->hfir;
++ IFX_PRINT("HFIR @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->host_global_regs->hfnum;
++ IFX_PRINT("HFNUM @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->host_global_regs->hptxsts;
++ IFX_PRINT("HPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->host_global_regs->haint;
++ IFX_PRINT("HAINT @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->host_global_regs->haintmsk;
++ IFX_PRINT("HAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr= _core_if->hprt0;
++ IFX_PRINT("HPRT0 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++
++ for (i=0; i<MAX_EPS_CHANNELS; i++)
++ {
++ IFX_PRINT("Host Channel %d Specific Registers\n", i);
++ addr=&_core_if->hc_regs[i]->hcchar;
++ IFX_PRINT("HCCHAR @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->hc_regs[i]->hcsplt;
++ IFX_PRINT("HCSPLT @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->hc_regs[i]->hcint;
++ IFX_PRINT("HCINT @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->hc_regs[i]->hcintmsk;
++ IFX_PRINT("HCINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->hc_regs[i]->hctsiz;
++ IFX_PRINT("HCTSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->hc_regs[i]->hcdma;
++ IFX_PRINT("HCDMA @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ }
++ #endif //__IS_HOST__
++
++ #ifdef __IS_DEVICE__
++ IFX_PRINT("Device Global Registers\n");
++ addr=&_core_if->dev_global_regs->dcfg;
++ IFX_PRINT("DCFG @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->dev_global_regs->dctl;
++ IFX_PRINT("DCTL @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->dev_global_regs->dsts;
++ IFX_PRINT("DSTS @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->dev_global_regs->diepmsk;
++ IFX_PRINT("DIEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->dev_global_regs->doepmsk;
++ IFX_PRINT("DOEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->dev_global_regs->daintmsk;
++ IFX_PRINT("DAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->dev_global_regs->daint;
++ IFX_PRINT("DAINT @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->dev_global_regs->dvbusdis;
++ IFX_PRINT("DVBUSID @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ addr=&_core_if->dev_global_regs->dvbuspulse;
++ IFX_PRINT("DVBUSPULSE @0x%08X : 0x%08X\n", (uint32_t)addr,ifxusb_rreg(addr));
++
++ addr=&_core_if->dev_global_regs->dtknqr1;
++ IFX_PRINT("DTKNQR1 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
++ if (_core_if->hwcfg2.b.dev_token_q_depth > 6) {
++ addr=&_core_if->dev_global_regs->dtknqr2;
++ IFX_PRINT("DTKNQR2 @0x%08X : 0x%08X\n", (uint32_t)addr,ifxusb_rreg(addr));
++ }
++
++ if (_core_if->hwcfg2.b.dev_token_q_depth > 14)
++ {
++ addr=&_core_if->dev_global_regs->dtknqr3_dthrctl;
++ IFX_PRINT("DTKNQR3_DTHRCTL @0x%08X : 0x%08X\n", (uint32_t)addr, ifxusb_rreg(addr));
++ }
++
++ if (_core_if->hwcfg2.b.dev_token_q_depth > 22)
++ {
++ addr=&_core_if->dev_global_regs->dtknqr4_fifoemptymsk;
++ IFX_PRINT("DTKNQR4 @0x%08X : 0x%08X\n", (uint32_t)addr, ifxusb_rreg(addr));
++ }
++
++ //for (i=0; i<= MAX_EPS_CHANNELS; i++)
++ //for (i=0; i<= 10; i++)
++ for (i=0; i<= 3; i++)
++ {
++ IFX_PRINT("Device EP %d Registers\n", i);
++ addri=&_core_if->in_ep_regs[i]->diepctl;addro=&_core_if->out_ep_regs[i]->doepctl;
++ IFX_PRINT("DEPCTL I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro));
++ addro=&_core_if->out_ep_regs[i]->doepfn;
++ IFX_PRINT("DEPFN I: O: 0x%08X\n",ifxusb_rreg(addro));
++ addri=&_core_if->in_ep_regs[i]->diepint;addro=&_core_if->out_ep_regs[i]->doepint;
++ IFX_PRINT("DEPINT I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro));
++ addri=&_core_if->in_ep_regs[i]->dieptsiz;addro=&_core_if->out_ep_regs[i]->doeptsiz;
++ IFX_PRINT("DETSIZ I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro));
++ addri=&_core_if->in_ep_regs[i]->diepdma;addro=&_core_if->out_ep_regs[i]->doepdma;
++ IFX_PRINT("DEPDMA I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro));
++ addri=&_core_if->in_ep_regs[i]->dtxfsts;
++ IFX_PRINT("DTXFSTS I: 0x%08X\n",ifxusb_rreg(addri) );
++ addri=&_core_if->in_ep_regs[i]->diepdmab;addro=&_core_if->out_ep_regs[i]->doepdmab;
++ IFX_PRINT("DEPDMAB I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro));
++ }
++ #endif //__IS_DEVICE__
++#endif //__ENABLE_DUMP__
++}
++
++void ifxusb_clean_spram(ifxusb_core_if_t *_core_if,uint32_t dwords)
++{
++ volatile uint32_t *addr1,*addr2, *start_addr, *end_addr;
++
++ if(!dwords)
++ return;
++
++ start_addr = (uint32_t *)_core_if->data_fifo_dbg;
++
++ end_addr = (uint32_t *)_core_if->data_fifo_dbg;
++ end_addr += dwords;
++
++ IFX_PRINT("Clearning SPRAM: 0x%8X-0x%8X\n", (uint32_t)start_addr,(uint32_t)end_addr);
++ for(addr1 = start_addr; addr1 < end_addr; addr1+=4)
++ {
++ for(addr2 = addr1; addr2 < addr1+4; addr2++)
++ *addr2=0x00000000;
++ }
++ IFX_PRINT("Clearning SPRAM: 0x%8X-0x%8X Done\n", (uint32_t)start_addr,(uint32_t)end_addr);
++ return;
++}
++
+diff --git a/drivers/usb/ifxhcd/ifxusb_cif.h b/drivers/usb/ifxhcd/ifxusb_cif.h
+new file mode 100644
+index 0000000..191781f
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxusb_cif.h
+@@ -0,0 +1,665 @@
++/*****************************************************************************
++ ** FILE NAME : ifxusb_cif.h
++ ** PROJECT : IFX USB sub-system V3
++ ** MODULES : IFX USB sub-system Host and Device driver
++ ** SRC VERSION : 1.0
++ ** DATE : 1/Jan/2009
++ ** AUTHOR : Chen, Howard
++ ** DESCRIPTION : The Core Interface provides basic services for accessing and
++ ** managing the IFX USB hardware. These services are used by both the
++ ** Host Controller Driver and the Peripheral Controller Driver.
++ ** FUNCTIONS :
++ ** COMPILER : gcc
++ ** REFERENCE : IFX hardware ref handbook for each plateforms
++ ** COPYRIGHT :
++ ** Version Control Section **
++ ** $Author$
++ ** $Date$
++ ** $Revisions$
++ ** $Log$ Revision history
++*****************************************************************************/
++
++/*!
++ \defgroup IFXUSB_DRIVER_V3 IFX USB SS Project
++ \brief IFX USB subsystem V3.x
++ */
++
++/*!
++ \defgroup IFXUSB_CIF Core Interface APIs
++ \ingroup IFXUSB_DRIVER_V3
++ \brief The Core Interface provides basic services for accessing and
++ managing the IFXUSB hardware. These services are used by both the
++ Host Controller Driver and the Peripheral Controller Driver.
++ */
++
++
++/*!
++ \file ifxusb_cif.h
++ \ingroup IFXUSB_DRIVER_V3
++ \brief This file contains the interface to the IFX USB Core.
++ */
++
++#if !defined(__IFXUSB_CIF_H__)
++#define __IFXUSB_CIF_H__
++
++#include <linux/workqueue.h>
++
++#include <linux/version.h>
++#include <asm/param.h>
++
++#include "ifxusb_plat.h"
++#include "ifxusb_regs.h"
++
++#ifdef __DEBUG__
++ #include "linux/timer.h"
++#endif
++
++///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++
++#define IFXUSB_PARAM_SPEED_HIGH 0
++#define IFXUSB_PARAM_SPEED_FULL 1
++
++#define IFXUSB_EP_SPEED_LOW 0
++#define IFXUSB_EP_SPEED_FULL 1
++#define IFXUSB_EP_SPEED_HIGH 2
++
++#define IFXUSB_EP_TYPE_CTRL 0
++#define IFXUSB_EP_TYPE_ISOC 1
++#define IFXUSB_EP_TYPE_BULK 2
++#define IFXUSB_EP_TYPE_INTR 3
++
++#define IFXUSB_HC_PID_DATA0 0
++#define IFXUSB_HC_PID_DATA2 1
++#define IFXUSB_HC_PID_DATA1 2
++#define IFXUSB_HC_PID_MDATA 3
++#define IFXUSB_HC_PID_SETUP 3
++
++
++/*!
++ \addtogroup IFXUSB_CIF
++ */
++/*@{*/
++
++/*!
++ \struct ifxusb_params
++ \brief IFXUSB Parameters structure.
++ This structure is used for both importing from insmod stage and run-time storage.
++ These parameters define how the IFXUSB controller should be configured.
++ */
++typedef struct ifxusb_params
++{
++ int32_t dma_burst_size; /*!< The DMA Burst size (applicable only for Internal DMA
++ Mode). 0(for single), 1(incr), 4(incr4), 8(incr8) 16(incr16)
++ */
++ /* Translate this to GAHBCFG values */
++ int32_t speed; /*!< Specifies the maximum speed of operation in host and device mode.
++ The actual speed depends on the speed of the attached device and
++ the value of phy_type. The actual speed depends on the speed of the
++ attached device.
++ 0 - High Speed (default)
++ 1 - Full Speed
++ */
++
++ int32_t data_fifo_size; /*!< Total number of dwords in the data FIFO memory. This
++ memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic
++ Tx FIFOs.
++ 32 to 32768
++ */
++ #ifdef __IS_DEVICE__
++ int32_t rx_fifo_size; /*!< Number of dwords in the Rx FIFO in device mode.
++ 16 to 32768
++ */
++
++
++ int32_t tx_fifo_size[MAX_EPS_CHANNELS]; /*!< Number of dwords in each of the Tx FIFOs in device mode.
++ 4 to 768
++ */
++ #ifdef __DED_FIFO__
++ int32_t thr_ctl; /*!< Threshold control on/off */
++ int32_t tx_thr_length; /*!< Threshold length for Tx */
++ int32_t rx_thr_length; /*!< Threshold length for Rx*/
++ #endif
++ #else //__IS_HOST__
++ int32_t host_channels; /*!< The number of host channel registers to use.
++ 1 to 16
++ */
++
++ int32_t rx_fifo_size; /*!< Number of dwords in the Rx FIFO in host mode.
++ 16 to 32768
++ */
++
++ int32_t nperio_tx_fifo_size;/*!< Number of dwords in the non-periodic Tx FIFO in host mode.
++ 16 to 32768
++ */
++
++ int32_t perio_tx_fifo_size; /*!< Number of dwords in the host periodic Tx FIFO.
++ 16 to 32768
++ */
++ #endif //__IS_HOST__
++
++ int32_t max_transfer_size; /*!< The maximum transfer size supported in bytes.
++ 2047 to 65,535
++ */
++
++ int32_t max_packet_count; /*!< The maximum number of packets in a transfer.
++ 15 to 511 (default 511)
++ */
++ int32_t phy_utmi_width; /*!< Specifies the UTMI+ Data Width.
++ 8 or 16 bits (default 16)
++ */
++
++ int32_t turn_around_time_hs; /*!< Specifies the Turn-Around time at HS*/
++ int32_t turn_around_time_fs; /*!< Specifies the Turn-Around time at FS*/
++
++ int32_t timeout_cal_hs; /*!< Specifies the Timeout_Calibration at HS*/
++ int32_t timeout_cal_fs; /*!< Specifies the Timeout_Calibration at FS*/
++} ifxusb_params_t;
++
++///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++
++/*!
++ \struct ifxusb_core_if
++ \brief The ifx_core_if structure contains information needed to manage
++ the IFX USB controller acting in either host or device mode. It
++ represents the programming view of the controller as a whole.
++ */
++typedef struct ifxusb_core_if
++{
++ ifxusb_params_t params; /*!< Run-time Parameters */
++
++ uint8_t core_no; /*!< core number (used as id when multi-core case */
++ char *core_name; /*!< core name used for registration and informative purpose*/
++ int irq; /*!< irq number this core is hooked */
++
++ /*****************************************************************
++ * Structures and pointers to physical register interface.
++ *****************************************************************/
++ /** Core Global registers starting at offset 000h. */
++ ifxusb_core_global_regs_t *core_global_regs; /*!< pointer to Core Global Registers, offset at 000h */
++
++ /** Host-specific registers */
++ #ifdef __IS_HOST__
++ /** Host Global Registers starting at offset 400h.*/
++ ifxusb_host_global_regs_t *host_global_regs; /*!< pointer to Host Global Registers, offset at 400h */
++ #define IFXUSB_HOST_GLOBAL_REG_OFFSET 0x400
++ /** Host Port 0 Control and Status Register */
++ volatile uint32_t *hprt0; /*!< pointer to HPRT0 Registers, offset at 440h */
++ #define IFXUSB_HOST_PORT_REGS_OFFSET 0x440
++ /** Host Channel Specific Registers at offsets 500h-5FCh. */
++ ifxusb_hc_regs_t *hc_regs[MAX_EPS_CHANNELS]; /*!< pointer to Host-Channel n Registers, offset at 500h */
++ #define IFXUSB_HOST_CHAN_REGS_OFFSET 0x500
++ #define IFXUSB_CHAN_REGS_OFFSET 0x20
++ #endif
++
++ /** Device-specific registers */
++ #ifdef __IS_DEVICE__
++ /** Device Global Registers starting at offset 800h */
++ ifxusb_device_global_regs_t *dev_global_regs; /*!< pointer to Device Global Registers, offset at 800h */
++ #define IFXUSB_DEV_GLOBAL_REG_OFFSET 0x800
++
++ /** Device Logical IN Endpoint-Specific Registers 900h-AFCh */
++ ifxusb_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS]; /*!< pointer to Device IN-EP Registers, offset at 900h */
++ #define IFXUSB_DEV_IN_EP_REG_OFFSET 0x900
++ #define IFXUSB_EP_REG_OFFSET 0x20
++ /** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */
++ ifxusb_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS];/*!< pointer to Device OUT-EP Registers, offset at 900h */
++ #define IFXUSB_DEV_OUT_EP_REG_OFFSET 0xB00
++ #endif
++
++ /** Power and Clock Gating Control Register */
++ volatile uint32_t *pcgcctl; /*!< pointer to Power and Clock Gating Control Registers, offset at E00h */
++ #define IFXUSB_PCGCCTL_OFFSET 0xE00
++
++ /** Push/pop addresses for endpoints or host channels.*/
++ uint32_t *data_fifo[MAX_EPS_CHANNELS]; /*!< pointer to FIFO access windows, offset at 1000h */
++ #define IFXUSB_DATA_FIFO_OFFSET 0x1000
++ #define IFXUSB_DATA_FIFO_SIZE 0x1000
++
++ uint32_t *data_fifo_dbg; /*!< pointer to FIFO debug windows, offset at 1000h */
++
++ /** Hardware Configuration -- stored here for convenience.*/
++ hwcfg1_data_t hwcfg1; /*!< preserved Hardware Configuration 1 */
++ hwcfg2_data_t hwcfg2; /*!< preserved Hardware Configuration 2 */
++ hwcfg3_data_t hwcfg3; /*!< preserved Hardware Configuration 3 */
++ hwcfg4_data_t hwcfg4; /*!< preserved Hardware Configuration 3 */
++ uint32_t snpsid; /*!< preserved SNPSID */
++
++ /*****************************************************************
++ * Run-time informations.
++ *****************************************************************/
++ /* Set to 1 if the core PHY interface bits in USBCFG have been initialized. */
++ uint8_t phy_init_done; /*!< indicated PHY is initialized. */
++
++ #ifdef __IS_HOST__
++ uint8_t queuing_high_bandwidth; /*!< Host mode, Queueing High Bandwidth. */
++ #endif
++} ifxusb_core_if_t;
++
++/*@}*//*IFXUSB_CIF*/
++
++
++/*!
++ \fn void *ifxusb_alloc_buf(size_t size, int clear)
++ \brief This function is called to allocate buffer of specified size.
++ The allocated buffer is mapped into DMA accessable address.
++ \param size Size in BYTE to be allocated
++ \param clear 0: don't do clear after buffer allocated, other: do clear to zero
++ \return 0/NULL: Fail; uncached pointer of allocated buffer
++ \ingroup IFXUSB_CIF
++ */
++extern void *ifxusb_alloc_buf(size_t size, int clear);
++
++/*!
++ \fn void ifxusb_free_buf(void *vaddr)
++ \brief This function is called to free allocated buffer.
++ \param vaddr the uncached pointer of the buffer
++ \ingroup IFXUSB_CIF
++ */
++extern void ifxusb_free_buf(void *vaddr);
++
++/*!
++ \fn int ifxusb_core_if_init(ifxusb_core_if_t *_core_if,
++ int _irq,
++ uint32_t _reg_base_addr,
++ uint32_t _fifo_base_addr,
++ uint32_t _fifo_dbg_addr)
++ \brief This function is called to initialize the IFXUSB CSR data
++ structures. The register addresses in the device and host
++ structures are initialized from the base address supplied by the
++ caller. The calling function must make the OS calls to get the
++ base address of the IFXUSB controller registers.
++ \param _core_if Pointer of core_if structure
++ \param _irq irq number
++ \param _reg_base_addr Base address of IFXUSB core registers
++ \param _fifo_base_addr Fifo base address
++ \param _fifo_dbg_addr Fifo debug address
++ \return 0: success;
++ \ingroup IFXUSB_CIF
++ */
++extern int ifxusb_core_if_init(ifxusb_core_if_t *_core_if,
++ int _irq,
++ uint32_t _reg_base_addr,
++ uint32_t _fifo_base_addr,
++ uint32_t _fifo_dbg_addr);
++
++
++/*!
++ \fn void ifxusb_core_if_remove(ifxusb_core_if_t *_core_if)
++ \brief This function free the mapped address in the IFXUSB CSR data structures.
++ \param _core_if Pointer of core_if structure
++ \ingroup IFXUSB_CIF
++ */
++extern void ifxusb_core_if_remove(ifxusb_core_if_t *_core_if);
++
++/*!
++ \fn void ifxusb_enable_global_interrupts( ifxusb_core_if_t *_core_if )
++ \brief This function enbles the controller's Global Interrupt in the AHB Config register.
++ \param _core_if Pointer of core_if structure
++ */
++extern void ifxusb_enable_global_interrupts( ifxusb_core_if_t *_core_if );
++
++/*!
++ \fn void ifxusb_disable_global_interrupts( ifxusb_core_if_t *_core_if )
++ \brief This function disables the controller's Global Interrupt in the AHB Config register.
++ \param _core_if Pointer of core_if structure
++ \ingroup IFXUSB_CIF
++ */
++extern void ifxusb_disable_global_interrupts( ifxusb_core_if_t *_core_if );
++
++/*!
++ \fn void ifxusb_flush_tx_fifo( ifxusb_core_if_t *_core_if, const int _num )
++ \brief Flush a Tx FIFO.
++ \param _core_if Pointer of core_if structure
++ \param _num Tx FIFO to flush. ( 0x10 for ALL TX FIFO )
++ \ingroup IFXUSB_CIF
++ */
++extern void ifxusb_flush_tx_fifo( ifxusb_core_if_t *_core_if, const int _num );
++
++/*!
++ \fn void ifxusb_flush_rx_fifo( ifxusb_core_if_t *_core_if )
++ \brief Flush Rx FIFO.
++ \param _core_if Pointer of core_if structure
++ \ingroup IFXUSB_CIF
++ */
++extern void ifxusb_flush_rx_fifo( ifxusb_core_if_t *_core_if );
++
++/*!
++ \fn void ifxusb_flush_both_fifo( ifxusb_core_if_t *_core_if )
++ \brief Flush ALL Rx and Tx FIFO.
++ \param _core_if Pointer of core_if structure
++ \ingroup IFXUSB_CIF
++ */
++extern void ifxusb_flush_both_fifo( ifxusb_core_if_t *_core_if );
++
++
++/*!
++ \fn int ifxusb_core_soft_reset(ifxusb_core_if_t *_core_if)
++ \brief Do core a soft reset of the core. Be careful with this because it
++ resets all the internal state machines of the core.
++ \param _core_if Pointer of core_if structure
++ \ingroup IFXUSB_CIF
++ */
++extern int ifxusb_core_soft_reset(ifxusb_core_if_t *_core_if);
++
++
++/*!
++ \brief Turn on the USB Core Power
++ \param _core_if Pointer of core_if structure
++ \ingroup IFXUSB_CIF
++*/
++extern void ifxusb_power_on (ifxusb_core_if_t *_core_if);
++
++/*!
++ \fn void ifxusb_power_off (ifxusb_core_if_t *_core_if)
++ \brief Turn off the USB Core Power
++ \param _core_if Pointer of core_if structure
++ \ingroup IFXUSB_CIF
++*/
++extern void ifxusb_power_off (ifxusb_core_if_t *_core_if);
++
++/*!
++ \fn void ifxusb_phy_power_on (ifxusb_core_if_t *_core_if)
++ \brief Turn on the USB PHY Power
++ \param _core_if Pointer of core_if structure
++ \ingroup IFXUSB_CIF
++*/
++extern void ifxusb_phy_power_on (ifxusb_core_if_t *_core_if);
++
++/*!
++ \fn void ifxusb_phy_power_off (ifxusb_core_if_t *_core_if)
++ \brief Turn off the USB PHY Power
++ \param _core_if Pointer of core_if structure
++ \ingroup IFXUSB_CIF
++*/
++extern void ifxusb_phy_power_off (ifxusb_core_if_t *_core_if);
++
++/*!
++ \fn void ifxusb_hard_reset(ifxusb_core_if_t *_core_if)
++ \brief Reset on the USB Core RCU
++ \param _core_if Pointer of core_if structure
++ \ingroup IFXUSB_CIF
++ */
++extern void ifxusb_hard_reset(ifxusb_core_if_t *_core_if);
++
++///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++
++
++#ifdef __IS_HOST__
++ /*!
++ \fn void ifxusb_host_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t *_params)
++ \brief This function initializes the IFXUSB controller registers for Host mode.
++ This function flushes the Tx and Rx FIFOs and it flushes any entries in the
++ request queues.
++ \param _core_if Pointer of core_if structure
++ \param _params parameters to be set
++ \ingroup IFXUSB_CIF
++ */
++ extern void ifxusb_host_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t *_params);
++
++ /*!
++ \fn void ifxusb_host_enable_interrupts(ifxusb_core_if_t *_core_if)
++ \brief This function enables the Host mode interrupts.
++ \param _core_if Pointer of core_if structure
++ \ingroup IFXUSB_CIF
++ */
++ extern void ifxusb_host_enable_interrupts(ifxusb_core_if_t *_core_if);
++
++ /*!
++ \fn void ifxusb_host_disable_interrupts(ifxusb_core_if_t *_core_if)
++ \brief This function disables the Host mode interrupts.
++ \param _core_if Pointer of core_if structure
++ \ingroup IFXUSB_CIF
++ */
++ extern void ifxusb_host_disable_interrupts(ifxusb_core_if_t *_core_if);
++
++ #if defined(__IS_TWINPASS__)
++ extern void ifxusb_enable_afe_oc(void);
++ #endif
++
++ /*!
++ \fn void ifxusb_vbus_init(ifxusb_core_if_t *_core_if)
++ \brief This function init the VBUS control.
++ \param _core_if Pointer of core_if structure
++ \ingroup IFXUSB_CIF
++ */
++ extern void ifxusb_vbus_init(ifxusb_core_if_t *_core_if);
++
++ /*!
++ \fn void ifxusb_vbus_free(ifxusb_core_if_t *_core_if)
++ \brief This function free the VBUS control.
++ \param _core_if Pointer of core_if structure
++ \ingroup IFXUSB_CIF
++ */
++ extern void ifxusb_vbus_free(ifxusb_core_if_t *_core_if);
++
++ /*!
++ \fn void ifxusb_vbus_on(ifxusb_core_if_t *_core_if)
++ \brief Turn on the USB 5V VBus Power
++ \param _core_if Pointer of core_if structure
++ \ingroup IFXUSB_CIF
++ */
++ extern void ifxusb_vbus_on(ifxusb_core_if_t *_core_if);
++
++ /*!
++ \fn void ifxusb_vbus_off(ifxusb_core_if_t *_core_if)
++ \brief Turn off the USB 5V VBus Power
++ \param _core_if Pointer of core_if structure
++ \ingroup IFXUSB_CIF
++ */
++ extern void ifxusb_vbus_off(ifxusb_core_if_t *_core_if);
++
++ /*!
++ \fn int ifxusb_vbus(ifxusb_core_if_t *_core_if)
++ \brief Read Current VBus status
++ \param _core_if Pointer of core_if structure
++ \ingroup IFXUSB_CIF
++ */
++ extern int ifxusb_vbus(ifxusb_core_if_t *_core_if);
++
++ #if defined(__DO_OC_INT__) && defined(__DO_OC_INT_ENABLE__)
++ /*!
++ \fn void ifxusb_oc_int_on(void)
++ \brief Turn on the OC interrupt
++ \ingroup IFXUSB_CIF
++ */
++ extern void ifxusb_oc_int_on(void);
++
++ /*!
++ \fn void ifxusb_oc_int_off(void)
++ \brief Turn off the OC interrupt
++ \ingroup IFXUSB_CIF
++ */
++ extern void ifxusb_oc_int_off(void);
++ #endif //defined(__DO_OC_INT__) && defined(__DO_OC_INT_ENABLE__)
++#endif
++
++///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++
++
++#ifdef __IS_DEVICE__
++ /*!
++ \fn void ifxusb_dev_enable_interrupts(ifxusb_core_if_t *_core_if)
++ \brief This function enables the Device mode interrupts.
++ \param _core_if Pointer of core_if structure
++ \ingroup IFXUSB_CIF
++ */
++ extern void ifxusb_dev_enable_interrupts(ifxusb_core_if_t *_core_if);
++
++ /*!
++ \fn uint32_t ifxusb_dev_get_frame_number(ifxusb_core_if_t *_core_if)
++ \brief Gets the current USB frame number. This is the frame number from the last SOF packet.
++ \param _core_if Pointer of core_if structure
++ \ingroup IFXUSB_CIF
++ */
++ extern uint32_t ifxusb_dev_get_frame_number(ifxusb_core_if_t *_core_if);
++
++ /*!
++ \fn void ifxusb_dev_ep_set_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _is_in)
++ \brief Set the EP STALL.
++ \param _core_if Pointer of core_if structure
++ \param _epno EP number
++ \param _is_in 1: is IN transfer
++ \ingroup IFXUSB_CIF
++ */
++ extern void ifxusb_dev_ep_set_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _is_in);
++
++ /*!
++ \fn void ifxusb_dev_ep_clear_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _ep_type, uint8_t _is_in)
++ \brief Set the EP STALL.
++ \param _core_if Pointer of core_if structure
++ \param _epno EP number
++ \param _ep_type EP Type
++ \ingroup IFXUSB_CIF
++ */
++ extern void ifxusb_dev_ep_clear_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _ep_type, uint8_t _is_in);
++
++ /*!
++ \fn void ifxusb_dev_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t *_params)
++ \brief This function initializes the IFXUSB controller registers for Device mode.
++ This function flushes the Tx and Rx FIFOs and it flushes any entries in the
++ request queues.
++ This function validate the imported parameters and store the result in the CIF structure.
++ After
++ \param _core_if Pointer of core_if structure
++ \param _params structure of inported parameters
++ \ingroup IFXUSB_CIF
++ */
++ extern void ifxusb_dev_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t *_params);
++#endif
++
++///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++
++#if defined(__GADGET_LED__) || defined(__HOST_LED__)
++ /*!
++ \fn void ifxusb_led_init(ifxusb_core_if_t *_core_if)
++ \brief This function init the LED control.
++ \param _core_if Pointer of core_if structure
++ \ingroup IFXUSB_CIF
++ */
++ extern void ifxusb_led_init(ifxusb_core_if_t *_core_if);
++
++ /*!
++ \fn void ifxusb_led_free(ifxusb_core_if_t *_core_if)
++ \brief This function free the LED control.
++ \param _core_if Pointer of core_if structure
++ \ingroup IFXUSB_CIF
++ */
++ extern void ifxusb_led_free(ifxusb_core_if_t *_core_if);
++
++ /*!
++ \fn void ifxusb_led(ifxusb_core_if_t *_core_if)
++ \brief This function trigger the LED access.
++ \param _core_if Pointer of core_if structure
++ \ingroup IFXUSB_CIF
++ */
++ extern void ifxusb_led(ifxusb_core_if_t *_core_if);
++#endif
++
++///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++
++/* internal routines for debugging */
++extern void ifxusb_dump_msg(const u8 *buf, unsigned int length);
++extern void ifxusb_dump_spram(ifxusb_core_if_t *_core_if);
++extern void ifxusb_dump_registers(ifxusb_core_if_t *_core_if);
++extern void ifxusb_clean_spram(ifxusb_core_if_t *_core_if,uint32_t dwords);
++
++///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++
++static inline uint32_t ifxusb_read_core_intr(ifxusb_core_if_t *_core_if)
++{
++ return (ifxusb_rreg(&_core_if->core_global_regs->gintsts) &
++ (ifxusb_rreg(&_core_if->core_global_regs->gintmsk)
++#ifdef __USE_TIMER_4_SOF__
++ | IFXUSB_SOF_INTR_MASK
++#endif
++ ));
++}
++
++static inline uint32_t ifxusb_read_otg_intr (ifxusb_core_if_t *_core_if)
++{
++ return (ifxusb_rreg (&_core_if->core_global_regs->gotgint));
++}
++
++static inline uint32_t ifxusb_mode(ifxusb_core_if_t *_core_if)
++{
++ return (ifxusb_rreg( &_core_if->core_global_regs->gintsts ) & 0x1);
++}
++static inline uint8_t ifxusb_is_device_mode(ifxusb_core_if_t *_core_if)
++{
++ return (ifxusb_mode(_core_if) != 1);
++}
++static inline uint8_t ifxusb_is_host_mode(ifxusb_core_if_t *_core_if)
++{
++ return (ifxusb_mode(_core_if) == 1);
++}
++
++///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++
++#ifdef __IS_HOST__
++ static inline uint32_t ifxusb_read_hprt0(ifxusb_core_if_t *_core_if)
++ {
++ hprt0_data_t hprt0;
++ hprt0.d32 = ifxusb_rreg(_core_if->hprt0);
++ hprt0.b.prtena = 0;
++ hprt0.b.prtconndet = 0;
++ hprt0.b.prtenchng = 0;
++ hprt0.b.prtovrcurrchng = 0;
++ return hprt0.d32;
++ }
++
++ static inline uint32_t ifxusb_read_host_all_channels_intr (ifxusb_core_if_t *_core_if)
++ {
++ return (ifxusb_rreg (&_core_if->host_global_regs->haint));
++ }
++
++ static inline uint32_t ifxusb_read_host_channel_intr (ifxusb_core_if_t *_core_if, int hc_num)
++ {
++ return (ifxusb_rreg (&_core_if->hc_regs[hc_num]->hcint));
++ }
++#endif
++
++#ifdef __IS_DEVICE__
++ static inline uint32_t ifxusb_read_dev_all_in_ep_intr(ifxusb_core_if_t *_core_if)
++ {
++ uint32_t v;
++ v = ifxusb_rreg(&_core_if->dev_global_regs->daint) &
++ ifxusb_rreg(&_core_if->dev_global_regs->daintmsk);
++ return (v & 0xffff);
++ }
++
++ static inline uint32_t ifxusb_read_dev_all_out_ep_intr(ifxusb_core_if_t *_core_if)
++ {
++ uint32_t v;
++ v = ifxusb_rreg(&_core_if->dev_global_regs->daint) &
++ ifxusb_rreg(&_core_if->dev_global_regs->daintmsk);
++ return ((v & 0xffff0000) >> 16);
++ }
++
++ static inline uint32_t ifxusb_read_dev_in_ep_intr(ifxusb_core_if_t *_core_if, int _ep_num)
++ {
++ uint32_t v;
++ v = ifxusb_rreg(&_core_if->in_ep_regs[_ep_num]->diepint) &
++ ifxusb_rreg(&_core_if->dev_global_regs->diepmsk);
++ return v;
++ }
++
++ static inline uint32_t ifxusb_read_dev_out_ep_intr(ifxusb_core_if_t *_core_if, int _ep_num)
++ {
++ uint32_t v;
++ v = ifxusb_rreg(&_core_if->out_ep_regs[_ep_num]->doepint) &
++ ifxusb_rreg(&_core_if->dev_global_regs->doepmsk);
++ return v;
++ }
++
++#endif
++
++extern void ifxusb_attr_create (void *_dev);
++
++extern void ifxusb_attr_remove (void *_dev);
++
++///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++
++#endif // !defined(__IFXUSB_CIF_H__)
++
++
+diff --git a/drivers/usb/ifxhcd/ifxusb_cif_d.c b/drivers/usb/ifxhcd/ifxusb_cif_d.c
+new file mode 100644
+index 0000000..36ab0e7
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxusb_cif_d.c
+@@ -0,0 +1,458 @@
++/*****************************************************************************
++ ** FILE NAME : ifxusb_cif_d.c
++ ** PROJECT : IFX USB sub-system V3
++ ** MODULES : IFX USB sub-system Host and Device driver
++ ** SRC VERSION : 1.0
++ ** DATE : 1/Jan/2009
++ ** AUTHOR : Chen, Howard
++ ** DESCRIPTION : The Core Interface provides basic services for accessing and
++ ** managing the IFX USB hardware. These services are used by the
++ ** Peripheral Controller Driver only.
++ *****************************************************************************/
++
++/*!
++ \file ifxusb_cif_d.c
++ \ingroup IFXUSB_DRIVER_V3
++ \brief This file contains the interface to the IFX USB Core.
++*/
++
++#include <linux/version.h>
++#include "ifxusb_version.h"
++
++
++#include <asm/byteorder.h>
++#include <asm/unaligned.h>
++
++#ifdef __DEBUG__
++ #include <linux/jiffies.h>
++#endif
++
++#include "ifxusb_plat.h"
++#include "ifxusb_regs.h"
++#include "ifxusb_cif.h"
++
++#include "ifxpcd.h"
++
++
++
++/*!
++ \brief Initializes the DevSpd field of the DCFG register depending on the PHY type
++ and the enumeration speed of the device.
++ \param _core_if Pointer of core_if structure
++ */
++void ifxusb_dev_init_spd(ifxusb_core_if_t *_core_if)
++{
++ uint32_t val;
++ dcfg_data_t dcfg;
++
++ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++ if (_core_if->params.speed == IFXUSB_PARAM_SPEED_FULL)
++ /* High speed PHY running at full speed */
++ val = 0x1;
++ else
++ /* High speed PHY running at high speed and full speed*/
++ val = 0x0;
++
++ IFX_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val);
++ dcfg.d32 = ifxusb_rreg(&_core_if->dev_global_regs->dcfg);
++ dcfg.b.devspd = val;
++ ifxusb_wreg(&_core_if->dev_global_regs->dcfg, dcfg.d32);
++}
++
++
++/*!
++ \brief This function enables the Device mode interrupts.
++ \param _core_if Pointer of core_if structure
++ */
++void ifxusb_dev_enable_interrupts(ifxusb_core_if_t *_core_if)
++{
++ gint_data_t intr_mask ={ .d32 = 0};
++ ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
++
++ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++ IFX_DEBUGPL(DBG_CIL, "%s()\n", __func__);
++
++ /* Clear any pending OTG Interrupts */
++ ifxusb_wreg( &global_regs->gotgint, 0xFFFFFFFF);
++
++ /* Clear any pending interrupts */
++ ifxusb_wreg( &global_regs->gintsts, 0xFFFFFFFF);
++
++ /* Enable the interrupts in the GINTMSK.*/
++ intr_mask.b.modemismatch = 1;
++ intr_mask.b.conidstschng = 1;
++ intr_mask.b.wkupintr = 1;
++ intr_mask.b.disconnect = 1;
++ intr_mask.b.usbsuspend = 1;
++
++ intr_mask.b.usbreset = 1;
++ intr_mask.b.enumdone = 1;
++ intr_mask.b.inepintr = 1;
++ intr_mask.b.outepintr = 1;
++ intr_mask.b.erlysuspend = 1;
++ #ifndef __DED_FIFO__
++// intr_mask.b.epmismatch = 1;
++ #endif
++
++ ifxusb_mreg( &global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++ IFX_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__, ifxusb_rreg( &global_regs->gintmsk));
++}
++
++/*!
++ \brief Gets the current USB frame number. This is the frame number from the last SOF packet.
++ \param _core_if Pointer of core_if structure
++ */
++uint32_t ifxusb_dev_get_frame_number(ifxusb_core_if_t *_core_if)
++{
++ dsts_data_t dsts;
++ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++ dsts.d32 = ifxusb_rreg(&_core_if->dev_global_regs->dsts);
++ /* read current frame/microfreme number from DSTS register */
++ return dsts.b.soffn;
++}
++
++
++/*!
++ \brief Set the EP STALL.
++ */
++void ifxusb_dev_ep_set_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _is_in)
++{
++ depctl_data_t depctl;
++ volatile uint32_t *depctl_addr;
++
++ IFX_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, _epno, (_is_in?"IN":"OUT"));
++
++ depctl_addr = (_is_in)? (&(_core_if->in_ep_regs [_epno]->diepctl)):
++ (&(_core_if->out_ep_regs[_epno]->doepctl));
++ depctl.d32 = ifxusb_rreg(depctl_addr);
++ depctl.b.stall = 1;
++
++ if (_is_in && depctl.b.epena)
++ depctl.b.epdis = 1;
++
++ ifxusb_wreg(depctl_addr, depctl.d32);
++ IFX_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",ifxusb_rreg(depctl_addr));
++ return;
++}
++
++/*!
++\brief Clear the EP STALL.
++ */
++void ifxusb_dev_ep_clear_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _ep_type, uint8_t _is_in)
++{
++ depctl_data_t depctl;
++ volatile uint32_t *depctl_addr;
++
++ IFX_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, _epno, (_is_in?"IN":"OUT"));
++
++ depctl_addr = (_is_in)? (&(_core_if->in_ep_regs [_epno]->diepctl)):
++ (&(_core_if->out_ep_regs[_epno]->doepctl));
++
++ depctl.d32 = ifxusb_rreg(depctl_addr);
++ /* clear the stall bits */
++ depctl.b.stall = 0;
++
++ /*
++ * USB Spec 9.4.5: For endpoints using data toggle, regardless
++ * of whether an endpoint has the Halt feature set, a
++ * ClearFeature(ENDPOINT_HALT) request always results in the
++ * data toggle being reinitialized to DATA0.
++ */
++ if (_ep_type == IFXUSB_EP_TYPE_INTR || _ep_type == IFXUSB_EP_TYPE_BULK)
++ depctl.b.setd0pid = 1; /* DATA0 */
++
++ ifxusb_wreg(depctl_addr, depctl.d32);
++ IFX_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",ifxusb_rreg(depctl_addr));
++ return;
++}
++
++/*!
++ \brief This function initializes the IFXUSB controller registers for Device mode.
++ This function flushes the Tx and Rx FIFOs and it flushes any entries in the
++ request queues.
++ \param _core_if Pointer of core_if structure
++ \param _params parameters to be set
++ */
++void ifxusb_dev_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t *_params)
++{
++ ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
++
++ gusbcfg_data_t usbcfg ={.d32 = 0};
++ gahbcfg_data_t ahbcfg ={.d32 = 0};
++ dcfg_data_t dcfg ={.d32 = 0};
++ grstctl_t resetctl ={.d32 = 0};
++ gotgctl_data_t gotgctl ={.d32 = 0};
++
++ uint32_t dir;
++ int i;
++
++ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++ IFX_DEBUGPL(DBG_CILV, "%s(%p)\n",__func__,_core_if);
++
++ /* Copy Params */
++ _core_if->params.dma_burst_size = _params->dma_burst_size;
++ _core_if->params.speed = _params->speed;
++ if(_params->max_transfer_size < 2048 || _params->max_transfer_size > ((1 << (_core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1) )
++ _core_if->params.max_transfer_size = ((1 << (_core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1);
++ else
++ _core_if->params.max_transfer_size = _params->max_transfer_size;
++
++ if(_params->max_packet_count < 16 || _params->max_packet_count > ((1 << (_core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1) )
++ _core_if->params.max_packet_count= ((1 << (_core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1);
++ else
++ _core_if->params.max_packet_count= _params->max_packet_count;
++ _core_if->params.phy_utmi_width = _params->phy_utmi_width;
++ _core_if->params.turn_around_time_hs = _params->turn_around_time_hs;
++ _core_if->params.turn_around_time_fs = _params->turn_around_time_fs;
++ _core_if->params.timeout_cal_hs = _params->timeout_cal_hs;
++ _core_if->params.timeout_cal_fs = _params->timeout_cal_fs;
++
++ #ifdef __DED_FIFO__
++ _core_if->params.thr_ctl = _params->thr_ctl;
++ _core_if->params.tx_thr_length = _params->tx_thr_length;
++ _core_if->params.rx_thr_length = _params->rx_thr_length;
++ #endif
++
++ /* Reset the Controller */
++ do
++ {
++ while(ifxusb_core_soft_reset( _core_if ))
++ ifxusb_hard_reset(_core_if);
++ } while (ifxusb_is_host_mode(_core_if));
++
++ usbcfg.d32 = ifxusb_rreg(&global_regs->gusbcfg);
++ #if 0
++ #if defined(__DED_FIFO__)
++ usbcfg.b.ForceDevMode = 1;
++ usbcfg.b.ForceHstMode = 0;
++ #endif
++ #endif
++ usbcfg.b.term_sel_dl_pulse = 0;
++ ifxusb_wreg (&global_regs->gusbcfg, usbcfg.d32);
++
++ /* This programming sequence needs to happen in FS mode before any other
++ * programming occurs */
++ /* High speed PHY. */
++ if (!_core_if->phy_init_done)
++ {
++ _core_if->phy_init_done = 1;
++ /* HS PHY parameters. These parameters are preserved
++ * during soft reset so only program the first time. Do
++ * a soft reset immediately after setting phyif. */
++ usbcfg.b.ulpi_utmi_sel = 0; //UTMI+
++ usbcfg.b.phyif = ( _core_if->params.phy_utmi_width == 16)?1:0;
++ ifxusb_wreg( &global_regs->gusbcfg, usbcfg.d32);
++ /* Reset after setting the PHY parameters */
++ ifxusb_core_soft_reset( _core_if );
++ }
++
++ /* Program the GAHBCFG Register.*/
++ switch (_core_if->params.dma_burst_size)
++ {
++ case 0 :
++ ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_SINGLE;
++ break;
++ case 1 :
++ ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR;
++ break;
++ case 4 :
++ ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR4;
++ break;
++ case 8 :
++ ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR8;
++ break;
++ case 16:
++ ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR16;
++ break;
++ }
++ ahbcfg.b.dmaenable = 1;
++ ifxusb_wreg(&global_regs->gahbcfg, ahbcfg.d32);
++
++ /* Program the GUSBCFG register. */
++ usbcfg.d32 = ifxusb_rreg( &global_regs->gusbcfg );
++ usbcfg.b.hnpcap = 0;
++ usbcfg.b.srpcap = 0;
++ ifxusb_wreg( &global_regs->gusbcfg, usbcfg.d32);
++
++ /* Restart the Phy Clock */
++ ifxusb_wreg(_core_if->pcgcctl, 0);
++
++ /* Device configuration register */
++ ifxusb_dev_init_spd(_core_if);
++ dcfg.d32 = ifxusb_rreg( &_core_if->dev_global_regs->dcfg);
++ dcfg.b.perfrint = IFXUSB_DCFG_FRAME_INTERVAL_80;
++ #if defined(__DED_FIFO__)
++ #if defined(__DESC_DMA__)
++ dcfg.b.descdma = 1;
++ #else
++ dcfg.b.descdma = 0;
++ #endif
++ #endif
++
++ ifxusb_wreg( &_core_if->dev_global_regs->dcfg, dcfg.d32 );
++
++ /* Configure data FIFO sizes */
++ _core_if->params.data_fifo_size = _core_if->hwcfg3.b.dfifo_depth;
++ _core_if->params.rx_fifo_size = ifxusb_rreg(&global_regs->grxfsiz);
++ IFX_DEBUGPL(DBG_CIL, "Initial: FIFO Size=0x%06X\n" , _core_if->params.data_fifo_size);
++ IFX_DEBUGPL(DBG_CIL, " Rx FIFO Size=0x%06X\n", _core_if->params.rx_fifo_size);
++
++ _core_if->params.tx_fifo_size[0]= ifxusb_rreg(&global_regs->gnptxfsiz) >> 16;
++
++ #ifdef __DED_FIFO__
++ for (i=1; i <= _core_if->hwcfg4.b.num_in_eps; i++)
++ _core_if->params.tx_fifo_size[i] =
++ ifxusb_rreg(&global_regs->dptxfsiz_dieptxf[i-1]) >> 16;
++ #else
++ for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
++ _core_if->params.tx_fifo_size[i+1] =
++ ifxusb_rreg(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
++ #endif
++
++ #ifdef __DEBUG__
++ #ifdef __DED_FIFO__
++ for (i=0; i <= _core_if->hwcfg4.b.num_in_eps; i++)
++ IFX_DEBUGPL(DBG_CIL, " Tx[%02d] FIFO Size=0x%06X\n",i, _core_if->params.tx_fifo_size[i]);
++ #else
++ IFX_DEBUGPL(DBG_CIL, " NPTx FIFO Size=0x%06X\n", _core_if->params.tx_fifo_size[0]);
++ for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
++ IFX_DEBUGPL(DBG_CIL, " PTx[%02d] FIFO Size=0x%06X\n",i, _core_if->params.tx_fifo_size[i+1]);
++ #endif
++ #endif
++
++ {
++ fifosize_data_t txfifosize;
++ if(_params->data_fifo_size >=0 && _params->data_fifo_size < _core_if->params.data_fifo_size)
++ _core_if->params.data_fifo_size = _params->data_fifo_size;
++
++
++ if(_params->rx_fifo_size >=0 && _params->rx_fifo_size < _core_if->params.rx_fifo_size)
++ _core_if->params.rx_fifo_size = _params->rx_fifo_size;
++ if(_core_if->params.data_fifo_size < _core_if->params.rx_fifo_size)
++ _core_if->params.rx_fifo_size = _core_if->params.data_fifo_size;
++ ifxusb_wreg( &global_regs->grxfsiz, _core_if->params.rx_fifo_size);
++
++ for (i=0; i < MAX_EPS_CHANNELS; i++)
++ if(_params->tx_fifo_size[i] >=0 && _params->tx_fifo_size[i] < _core_if->params.tx_fifo_size[i])
++ _core_if->params.tx_fifo_size[i] = _params->tx_fifo_size[i];
++
++ txfifosize.b.startaddr = _core_if->params.rx_fifo_size;
++ #ifdef __DED_FIFO__
++ if(txfifosize.b.startaddr + _core_if->params.tx_fifo_size[0] > _core_if->params.data_fifo_size)
++ _core_if->params.tx_fifo_size[0]= _core_if->params.data_fifo_size - txfifosize.b.startaddr;
++ txfifosize.b.depth=_core_if->params.tx_fifo_size[0];
++ ifxusb_wreg( &global_regs->gnptxfsiz, txfifosize.d32);
++ txfifosize.b.startaddr += _core_if->params.tx_fifo_size[0];
++ for (i=1; i <= _core_if->hwcfg4.b.num_in_eps; i++)
++ {
++ if(txfifosize.b.startaddr + _core_if->params.tx_fifo_size[i] > _core_if->params.data_fifo_size)
++ _core_if->params.tx_fifo_size[i]= _core_if->params.data_fifo_size - txfifosize.b.startaddr;
++ txfifosize.b.depth=_core_if->params.tx_fifo_size[i];
++ ifxusb_wreg( &global_regs->dptxfsiz_dieptxf[i-1], txfifosize.d32);
++ txfifosize.b.startaddr += _core_if->params.tx_fifo_size[i];
++ }
++ #else
++ if(txfifosize.b.startaddr + _core_if->params.tx_fifo_size[0] > _core_if->params.data_fifo_size)
++ _core_if->params.tx_fifo_size[0]= _core_if->params.data_fifo_size - txfifosize.b.startaddr;
++ txfifosize.b.depth=_core_if->params.tx_fifo_size[0];
++ ifxusb_wreg( &global_regs->gnptxfsiz, txfifosize.d32);
++ txfifosize.b.startaddr += _core_if->params.tx_fifo_size[0];
++ for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
++ {
++ if(txfifosize.b.startaddr + _core_if->params.tx_fifo_size[i+1] > _core_if->params.data_fifo_size)
++ _core_if->params.tx_fifo_size[i+1]= _core_if->params.data_fifo_size - txfifosize.b.startaddr;
++ //txfifosize.b.depth=_core_if->params.tx_fifo_size[i+1];
++ ifxusb_wreg( &global_regs->dptxfsiz_dieptxf[i], txfifosize.d32);
++ txfifosize.b.startaddr += _core_if->params.tx_fifo_size[i+1];
++ }
++ #endif
++ }
++
++ #ifdef __DEBUG__
++ {
++ fifosize_data_t fifosize;
++ IFX_DEBUGPL(DBG_CIL, "Result : FIFO Size=0x%06X\n" , _core_if->params.data_fifo_size);
++
++ IFX_DEBUGPL(DBG_CIL, " Rx FIFO =0x%06X Sz=0x%06X\n", 0,ifxusb_rreg(&global_regs->grxfsiz));
++ #ifdef __DED_FIFO__
++ fifosize.d32=ifxusb_rreg(&global_regs->gnptxfsiz);
++ IFX_DEBUGPL(DBG_CIL, " Tx[00] FIFO =0x%06X Sz=0x%06X\n", fifosize.b.startaddr,fifosize.b.depth);
++ for (i=1; i <= _core_if->hwcfg4.b.num_in_eps; i++)
++ {
++ fifosize.d32=ifxusb_rreg(&global_regs->dptxfsiz_dieptxf[i-1]);
++ IFX_DEBUGPL(DBG_CIL, " Tx[%02d] FIFO 0x%06X Sz=0x%06X\n",i, fifosize.b.startaddr,fifosize.b.depth);
++ }
++ #else
++ fifosize.d32=ifxusb_rreg(&global_regs->gnptxfsiz);
++ IFX_DEBUGPL(DBG_CIL, " NPTx FIFO =0x%06X Sz=0x%06X\n", fifosize.b.startaddr,fifosize.b.depth);
++ for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
++ {
++ fifosize.d32=ifxusb_rreg(&global_regs->dptxfsiz_dieptxf[i]);
++ IFX_DEBUGPL(DBG_CIL, " PTx[%02d] FIFO 0x%06X Sz=0x%06X\n",i, fifosize.b.startaddr,fifosize.b.depth);
++ }
++ #endif
++ }
++ #endif
++
++ /* Clear Host Set HNP Enable in the OTG Control Register */
++ gotgctl.b.hstsethnpen = 1;
++ ifxusb_mreg( &global_regs->gotgctl, gotgctl.d32, 0);
++
++ /* Flush the FIFOs */
++ ifxusb_flush_tx_fifo(_core_if, 0x10); /* all Tx FIFOs */
++ ifxusb_flush_rx_fifo(_core_if);
++
++ /* Flush the Learning Queue. */
++ resetctl.b.intknqflsh = 1;
++ ifxusb_wreg( &global_regs->grstctl, resetctl.d32);
++
++ /* Clear all pending Device Interrupts */
++ ifxusb_wreg( &_core_if->dev_global_regs->diepmsk , 0 );
++ ifxusb_wreg( &_core_if->dev_global_regs->doepmsk , 0 );
++ ifxusb_wreg( &_core_if->dev_global_regs->daint , 0xFFFFFFFF );
++ ifxusb_wreg( &_core_if->dev_global_regs->daintmsk, 0 );
++
++ dir=_core_if->hwcfg1.d32;
++ for (i=0; i <= _core_if->hwcfg2.b.num_dev_ep ; i++,dir>>=2)
++ {
++ depctl_data_t depctl;
++ if((dir&0x03)==0 || (dir&0x03) ==1)
++ {
++ depctl.d32 = ifxusb_rreg(&_core_if->in_ep_regs[i]->diepctl);
++ if (depctl.b.epena)
++ {
++ depctl.d32 = 0;
++ depctl.b.epdis = 1;
++ depctl.b.snak = 1;
++ }
++ else
++ depctl.d32 = 0;
++ ifxusb_wreg( &_core_if->in_ep_regs[i]->diepctl, depctl.d32);
++ #ifndef __DESC_DMA__
++ ifxusb_wreg( &_core_if->in_ep_regs[i]->dieptsiz, 0);
++ #endif
++ ifxusb_wreg( &_core_if->in_ep_regs[i]->diepdma, 0);
++ ifxusb_wreg( &_core_if->in_ep_regs[i]->diepint, 0xFF);
++ }
++
++ if((dir&0x03)==0 || (dir&0x03) ==2)
++ {
++ depctl.d32 = ifxusb_rreg(&_core_if->out_ep_regs[i]->doepctl);
++ if (depctl.b.epena)
++ {
++ depctl.d32 = 0;
++ depctl.b.epdis = 1;
++ depctl.b.snak = 1;
++ }
++ else
++ depctl.d32 = 0;
++ ifxusb_wreg( &_core_if->out_ep_regs[i]->doepctl, depctl.d32);
++ #ifndef __DESC_DMA__
++ ifxusb_wreg( &_core_if->out_ep_regs[i]->doeptsiz, 0);
++ #endif
++ ifxusb_wreg( &_core_if->out_ep_regs[i]->doepdma, 0);
++ ifxusb_wreg( &_core_if->out_ep_regs[i]->doepint, 0xFF);
++ }
++ }
++}
++
+diff --git a/drivers/usb/ifxhcd/ifxusb_cif_h.c b/drivers/usb/ifxhcd/ifxusb_cif_h.c
+new file mode 100644
+index 0000000..0f47ecd
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxusb_cif_h.c
+@@ -0,0 +1,846 @@
++/*****************************************************************************
++ ** FILE NAME : ifxusb_cif_h.c
++ ** PROJECT : IFX USB sub-system V3
++ ** MODULES : IFX USB sub-system Host and Device driver
++ ** SRC VERSION : 1.0
++ ** DATE : 1/Jan/2009
++ ** AUTHOR : Chen, Howard
++ ** DESCRIPTION : The Core Interface provides basic services for accessing and
++ ** managing the IFX USB hardware. These services are used by the
++ ** Host Controller Driver only.
++ *****************************************************************************/
++
++/*!
++ \file ifxusb_cif_h.c
++ \ingroup IFXUSB_DRIVER_V3
++ \brief This file contains the interface to the IFX USB Core.
++*/
++#include <linux/version.h>
++#include "ifxusb_version.h"
++
++#include <asm/byteorder.h>
++#include <asm/unaligned.h>
++
++#ifdef __DEBUG__
++ #include <linux/jiffies.h>
++#endif
++#include <linux/platform_device.h>
++#include <linux/kernel.h>
++#include <linux/ioport.h>
++#if defined(__UEIP__)
++// #include <asm/ifx/ifx_board.h>
++#endif
++
++//#include <asm/ifx/ifx_gpio.h>
++#if defined(__UEIP__)
++// #include <asm/ifx/ifx_led.h>
++#endif
++
++#include "ifxusb_plat.h"
++#include "ifxusb_regs.h"
++#include "ifxusb_cif.h"
++
++#include "ifxhcd.h"
++
++#if !defined(__UEIP__)
++ #undef __USING_LED_AS_GPIO__
++#endif
++
++
++/*!
++ \brief This function enables the Host mode interrupts.
++ \param _core_if Pointer of core_if structure
++ */
++void ifxusb_host_enable_interrupts(ifxusb_core_if_t *_core_if)
++{
++ gint_data_t intr_mask ={ .d32 = 0};
++ ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
++
++ IFX_DEBUGPL(DBG_CIL, "%s()\n", __func__);
++
++ /* Clear any pending OTG Interrupts */
++ ifxusb_wreg( &global_regs->gotgint, 0xFFFFFFFF);
++
++ /* Clear any pending interrupts */
++ ifxusb_wreg( &global_regs->gintsts, 0xFFFFFFFF);
++
++ /* Enable the interrupts in the GINTMSK.*/
++
++ /* Common interrupts */
++ intr_mask.b.modemismatch = 1;
++ intr_mask.b.conidstschng = 1;
++ intr_mask.b.wkupintr = 1;
++ intr_mask.b.disconnect = 1;
++ intr_mask.b.usbsuspend = 1;
++
++ /* Host interrupts */
++ intr_mask.b.sofintr = 1;
++ intr_mask.b.portintr = 1;
++ intr_mask.b.hcintr = 1;
++
++ ifxusb_mreg( &global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++ IFX_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__, ifxusb_rreg( &global_regs->gintmsk));
++}
++
++/*!
++ \brief This function disables the Host mode interrupts.
++ \param _core_if Pointer of core_if structure
++ */
++void ifxusb_host_disable_interrupts(ifxusb_core_if_t *_core_if)
++{
++ ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
++
++ IFX_DEBUGPL(DBG_CILV, "%s()\n", __func__);
++
++ #if 1
++ ifxusb_wreg( &global_regs->gintmsk, 0);
++ #else
++ /* Common interrupts */
++ {
++ gint_data_t intr_mask ={.d32 = 0};
++ intr_mask.b.modemismatch = 1;
++ intr_mask.b.rxstsqlvl = 1;
++ intr_mask.b.conidstschng = 1;
++ intr_mask.b.wkupintr = 1;
++ intr_mask.b.disconnect = 1;
++ intr_mask.b.usbsuspend = 1;
++
++ /* Host interrupts */
++ intr_mask.b.sofintr = 1;
++ intr_mask.b.portintr = 1;
++ intr_mask.b.hcintr = 1;
++ intr_mask.b.ptxfempty = 1;
++ intr_mask.b.nptxfempty = 1;
++ ifxusb_mreg(&global_regs->gintmsk, intr_mask.d32, 0);
++ }
++ #endif
++}
++
++/*!
++ \brief This function initializes the IFXUSB controller registers for Host mode.
++ This function flushes the Tx and Rx FIFOs and it flushes any entries in the
++ request queues.
++ \param _core_if Pointer of core_if structure
++ \param _params parameters to be set
++ */
++void ifxusb_host_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t *_params)
++{
++ ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
++
++ gusbcfg_data_t usbcfg ={.d32 = 0};
++ gahbcfg_data_t ahbcfg ={.d32 = 0};
++ gotgctl_data_t gotgctl ={.d32 = 0};
++
++ int i;
++
++ IFX_DEBUGPL(DBG_CILV, "%s(%p)\n",__func__,_core_if);
++
++ /* Copy Params */
++
++ _core_if->params.dma_burst_size = _params->dma_burst_size;
++ _core_if->params.speed = _params->speed;
++ _core_if->params.max_transfer_size = _params->max_transfer_size;
++ _core_if->params.max_packet_count = _params->max_packet_count;
++ _core_if->params.phy_utmi_width = _params->phy_utmi_width;
++ _core_if->params.turn_around_time_hs = _params->turn_around_time_hs;
++ _core_if->params.turn_around_time_fs = _params->turn_around_time_fs;
++ _core_if->params.timeout_cal_hs = _params->timeout_cal_hs;
++ _core_if->params.timeout_cal_fs = _params->timeout_cal_fs;
++
++ /* Reset the Controller */
++ do
++ {
++ while(ifxusb_core_soft_reset( _core_if ))
++ ifxusb_hard_reset(_core_if);
++ } while (ifxusb_is_device_mode(_core_if));
++
++ usbcfg.d32 = ifxusb_rreg(&global_regs->gusbcfg);
++// usbcfg.b.ulpi_ext_vbus_drv = 1;
++ usbcfg.b.term_sel_dl_pulse = 0;
++ ifxusb_wreg (&global_regs->gusbcfg, usbcfg.d32);
++
++ /* This programming sequence needs to happen in FS mode before any other
++ * programming occurs */
++ /* High speed PHY. */
++ if (!_core_if->phy_init_done)
++ {
++ _core_if->phy_init_done = 1;
++ /* HS PHY parameters. These parameters are preserved
++ * during soft reset so only program the first time. Do
++ * a soft reset immediately after setting phyif. */
++ usbcfg.b.ulpi_utmi_sel = 0; //UTMI+
++ usbcfg.b.phyif = ( _core_if->params.phy_utmi_width == 16)?1:0;
++ ifxusb_wreg( &global_regs->gusbcfg, usbcfg.d32);
++ /* Reset after setting the PHY parameters */
++ ifxusb_core_soft_reset( _core_if );
++ }
++
++ usbcfg.d32 = ifxusb_rreg(&global_regs->gusbcfg);
++// usbcfg.b.ulpi_fsls = 0;
++// usbcfg.b.ulpi_clk_sus_m = 0;
++ ifxusb_wreg(&global_regs->gusbcfg, usbcfg.d32);
++
++ /* Program the GAHBCFG Register.*/
++ switch (_core_if->params.dma_burst_size)
++ {
++ case 0 :
++ ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_SINGLE;
++ break;
++ case 1 :
++ ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR;
++ break;
++ case 4 :
++ ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR4;
++ break;
++ case 8 :
++ ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR8;
++ break;
++ case 16:
++ ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR16;
++ break;
++ }
++ ahbcfg.b.dmaenable = 1;
++ ifxusb_wreg(&global_regs->gahbcfg, ahbcfg.d32);
++
++ /* Program the GUSBCFG register. */
++ usbcfg.d32 = ifxusb_rreg( &global_regs->gusbcfg );
++ usbcfg.b.hnpcap = 0;
++ usbcfg.b.srpcap = 0;
++ ifxusb_wreg( &global_regs->gusbcfg, usbcfg.d32);
++
++ /* Restart the Phy Clock */
++ ifxusb_wreg(_core_if->pcgcctl, 0);
++
++ /* Initialize Host Configuration Register */
++ {
++ hcfg_data_t hcfg;
++ hcfg.d32 = ifxusb_rreg(&_core_if->host_global_regs->hcfg);
++ hcfg.b.fslspclksel = IFXUSB_HCFG_30_60_MHZ;
++ if (_params->speed == IFXUSB_PARAM_SPEED_FULL)
++ hcfg.b.fslssupp = 1;
++ ifxusb_wreg(&_core_if->host_global_regs->hcfg, hcfg.d32);
++ }
++
++ _core_if->params.host_channels=(_core_if->hwcfg2.b.num_host_chan + 1);
++
++ if(_params->host_channels>0 && _params->host_channels < _core_if->params.host_channels)
++ _core_if->params.host_channels = _params->host_channels;
++
++ /* Configure data FIFO sizes */
++ _core_if->params.data_fifo_size = _core_if->hwcfg3.b.dfifo_depth;
++ _core_if->params.rx_fifo_size = ifxusb_rreg(&global_regs->grxfsiz);
++ _core_if->params.nperio_tx_fifo_size= ifxusb_rreg(&global_regs->gnptxfsiz) >> 16;
++ _core_if->params.perio_tx_fifo_size = ifxusb_rreg(&global_regs->hptxfsiz) >> 16;
++ IFX_DEBUGPL(DBG_CIL, "Initial: FIFO Size=0x%06X\n" , _core_if->params.data_fifo_size);
++ IFX_DEBUGPL(DBG_CIL, " Rx FIFO Size=0x%06X\n", _core_if->params.rx_fifo_size);
++ IFX_DEBUGPL(DBG_CIL, " NPTx FIFO Size=0x%06X\n", _core_if->params.nperio_tx_fifo_size);
++ IFX_DEBUGPL(DBG_CIL, " PTx FIFO Size=0x%06X\n", _core_if->params.perio_tx_fifo_size);
++
++ {
++ fifosize_data_t txfifosize;
++ if(_params->data_fifo_size >=0 && _params->data_fifo_size < _core_if->params.data_fifo_size)
++ _core_if->params.data_fifo_size = _params->data_fifo_size;
++
++ if( _params->rx_fifo_size >= 0 && _params->rx_fifo_size < _core_if->params.rx_fifo_size)
++ _core_if->params.rx_fifo_size = _params->rx_fifo_size;
++ if( _params->nperio_tx_fifo_size >=0 && _params->nperio_tx_fifo_size < _core_if->params.nperio_tx_fifo_size)
++ _core_if->params.nperio_tx_fifo_size = _params->nperio_tx_fifo_size;
++ if( _params->perio_tx_fifo_size >=0 && _params->perio_tx_fifo_size < _core_if->params.perio_tx_fifo_size)
++ _core_if->params.perio_tx_fifo_size = _params->perio_tx_fifo_size;
++
++ if(_core_if->params.data_fifo_size < _core_if->params.rx_fifo_size)
++ _core_if->params.rx_fifo_size = _core_if->params.data_fifo_size;
++ ifxusb_wreg( &global_regs->grxfsiz, _core_if->params.rx_fifo_size);
++ txfifosize.b.startaddr = _core_if->params.rx_fifo_size;
++
++ if(txfifosize.b.startaddr + _core_if->params.nperio_tx_fifo_size > _core_if->params.data_fifo_size)
++ _core_if->params.nperio_tx_fifo_size = _core_if->params.data_fifo_size - txfifosize.b.startaddr;
++ txfifosize.b.depth=_core_if->params.nperio_tx_fifo_size;
++ ifxusb_wreg( &global_regs->gnptxfsiz, txfifosize.d32);
++ txfifosize.b.startaddr += _core_if->params.nperio_tx_fifo_size;
++
++ if(txfifosize.b.startaddr + _core_if->params.perio_tx_fifo_size > _core_if->params.data_fifo_size)
++ _core_if->params.perio_tx_fifo_size = _core_if->params.data_fifo_size - txfifosize.b.startaddr;
++ txfifosize.b.depth=_core_if->params.perio_tx_fifo_size;
++ ifxusb_wreg( &global_regs->hptxfsiz, txfifosize.d32);
++ txfifosize.b.startaddr += _core_if->params.perio_tx_fifo_size;
++ }
++
++ #ifdef __DEBUG__
++ {
++ fifosize_data_t fifosize;
++ IFX_DEBUGPL(DBG_CIL, "Result : FIFO Size=0x%06X\n" , _core_if->params.data_fifo_size);
++
++ fifosize.d32=ifxusb_rreg(&global_regs->grxfsiz);
++ IFX_DEBUGPL(DBG_CIL, " Rx FIFO =0x%06X 0x%06X\n", fifosize.b.startaddr,fifosize.b.depth);
++ fifosize.d32=ifxusb_rreg(&global_regs->gnptxfsiz);
++ IFX_DEBUGPL(DBG_CIL, " NPTx FIFO =0x%06X 0x%06X\n", fifosize.b.startaddr,fifosize.b.depth);
++ fifosize.d32=ifxusb_rreg(&global_regs->hptxfsiz);
++ IFX_DEBUGPL(DBG_CIL, " PTx FIFO =0x%06X 0x%06X\n", fifosize.b.startaddr,fifosize.b.depth);
++ }
++ #endif
++
++ /* Clear Host Set HNP Enable in the OTG Control Register */
++ gotgctl.b.hstsethnpen = 1;
++ ifxusb_mreg( &global_regs->gotgctl, gotgctl.d32, 0);
++
++ /* Flush the FIFOs */
++ ifxusb_flush_tx_fifo(_core_if, 0x10); /* all Tx FIFOs */
++ ifxusb_flush_rx_fifo(_core_if);
++
++ for (i = 0; i < _core_if->hwcfg2.b.num_host_chan + 1; i++)
++ {
++ hcchar_data_t hcchar;
++ hcchar.d32 = ifxusb_rreg(&_core_if->hc_regs[i]->hcchar);
++ hcchar.b.chen = 0;
++ hcchar.b.chdis = 1;
++ hcchar.b.epdir = 0;
++ ifxusb_wreg(&_core_if->hc_regs[i]->hcchar, hcchar.d32);
++ }
++ /* Halt all channels to put them into a known state. */
++ for (i = 0; i < _core_if->hwcfg2.b.num_host_chan + 1; i++)
++ {
++ hcchar_data_t hcchar;
++ int count = 0;
++
++ hcchar.d32 = ifxusb_rreg(&_core_if->hc_regs[i]->hcchar);
++ hcchar.b.chen = 1;
++ hcchar.b.chdis = 1;
++ hcchar.b.epdir = 0;
++ ifxusb_wreg(&_core_if->hc_regs[i]->hcchar, hcchar.d32);
++
++ IFX_DEBUGPL(DBG_HCDV, "%s: Halt channel %d\n", __func__, i);
++ do{
++ hcchar.d32 = ifxusb_rreg(&_core_if->hc_regs[i]->hcchar);
++ if (++count > 1000)
++ {
++ IFX_ERROR("%s: Unable to clear halt on channel %d\n", __func__, i);
++ break;
++ }
++ } while (hcchar.b.chen);
++ }
++}
++
++//////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++
++#if defined(__UEIP__)
++ #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
++ int ifxusb_vbus_status =-1;
++ #endif
++
++ #if defined(IFX_GPIO_USB_VBUS1) || defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
++ int ifxusb_vbus1_status =-1;
++ #endif
++
++ #if defined(IFX_GPIO_USB_VBUS2) || defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
++ int ifxusb_vbus2_status =-1;
++ #endif
++
++ #if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
++ static void *g_usb_vbus_trigger = NULL;
++ #endif
++ #if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
++ static void *g_usb_vbus1_trigger = NULL;
++ #endif
++ #if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
++ static void *g_usb_vbus2_trigger = NULL;
++ #endif
++
++ #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
++ int ifxusb_vbus_gpio_inited=0;
++ #endif
++
++#else //defined(__UEIP__)
++ int ifxusb_vbus_gpio_inited=0;
++#endif
++
++//////////////////////////////////////////////////////////////////////////////////////////////////////////////////
++
++void ifxusb_vbus_init(ifxusb_core_if_t *_core_if)
++{
++ #if defined(__UEIP__)
++ #if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
++ if ( !g_usb_vbus_trigger )
++ {
++ ifx_led_trigger_register("USB_VBUS", &g_usb_vbus_trigger);
++ if ( g_usb_vbus_trigger != NULL )
++ {
++ struct ifx_led_trigger_attrib attrib = {0};
++ attrib.delay_on = 0;
++ attrib.delay_off = 0;
++ attrib.timeout = 0;
++ attrib.def_value = 0;
++ attrib.flags = IFX_LED_TRIGGER_ATTRIB_DELAY_ON | IFX_LED_TRIGGER_ATTRIB_DELAY_OFF | IFX_LED_TRIGGER_ATTRIB_TIMEOUT | IFX_LED_TRIGGER_ATTRIB_DEF_VALUE;
++ IFX_DEBUGP("Reg USB power!!\n");
++ ifx_led_trigger_set_attrib(g_usb_vbus_trigger, &attrib);
++ ifxusb_vbus_status =0;
++ }
++ }
++ #endif
++ #if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
++ if(_core_if->core_no==0 && !g_usb_vbus1_trigger )
++ {
++ ifx_led_trigger_register("USB_VBUS1", &g_usb_vbus1_trigger);
++ if ( g_usb_vbus1_trigger != NULL )
++ {
++ struct ifx_led_trigger_attrib attrib = {0};
++ attrib.delay_on = 0;
++ attrib.delay_off = 0;
++ attrib.timeout = 0;
++ attrib.def_value = 0;
++ attrib.flags = IFX_LED_TRIGGER_ATTRIB_DELAY_ON | IFX_LED_TRIGGER_ATTRIB_DELAY_OFF | IFX_LED_TRIGGER_ATTRIB_TIMEOUT | IFX_LED_TRIGGER_ATTRIB_DEF_VALUE;
++ IFX_DEBUGP("Reg USB1 power!!\n");
++ ifx_led_trigger_set_attrib(g_usb_vbus1_trigger, &attrib);
++ ifxusb_vbus1_status =0;
++ }
++ }
++ #endif
++ #if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
++ if(_core_if->core_no==1 && !g_usb_vbus2_trigger )
++ {
++ ifx_led_trigger_register("USB_VBUS2", &g_usb_vbus2_trigger);
++ if ( g_usb_vbus2_trigger != NULL )
++ {
++ struct ifx_led_trigger_attrib attrib = {0};
++ attrib.delay_on = 0;
++ attrib.delay_off = 0;
++ attrib.timeout = 0;
++ attrib.def_value = 0;
++ attrib.flags = IFX_LED_TRIGGER_ATTRIB_DELAY_ON | IFX_LED_TRIGGER_ATTRIB_DELAY_OFF | IFX_LED_TRIGGER_ATTRIB_TIMEOUT | IFX_LED_TRIGGER_ATTRIB_DEF_VALUE;
++ IFX_DEBUGP("Reg USB2 power!!\n");
++ ifx_led_trigger_set_attrib(g_usb_vbus2_trigger, &attrib);
++ ifxusb_vbus2_status =0;
++ }
++ }
++ #endif
++
++ #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
++ /* == 20100712 AVM/WK use gpio_inited as bitmask == */
++ if(ifxusb_vbus_gpio_inited == 0)
++ {
++ if(!ifx_gpio_register(IFX_GPIO_MODULE_USB))
++ {
++ IFX_DEBUGP("Register USB VBus through GPIO OK!!\n");
++ #ifdef IFX_GPIO_USB_VBUS
++ ifxusb_vbus_status =0;
++ #endif //IFX_GPIO_USB_VBUS
++ #ifdef IFX_GPIO_USB_VBUS1
++ ifxusb_vbus1_status=0;
++ #endif //IFX_GPIO_USB_VBUS1
++ #ifdef IFX_GPIO_USB_VBUS2
++ ifxusb_vbus2_status=0;
++ #endif //IFX_GPIO_USB_VBUS2
++ ifxusb_vbus_gpio_inited|= (1<<_core_if->core_no);
++ }
++ else
++ IFX_PRINT("Register USB VBus Failed!!\n");
++ } else {
++ ifxusb_vbus_gpio_inited|= (1<<_core_if->core_no);
++ }
++ #endif //defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
++ #endif //defined(__UEIP__)
++}
++
++void ifxusb_vbus_free(ifxusb_core_if_t *_core_if)
++{
++ #if defined(__UEIP__)
++ #if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
++ if ( g_usb_vbus_trigger )
++ {
++ ifx_led_trigger_deregister(g_usb_vbus_trigger);
++ g_usb_vbus_trigger = NULL;
++ ifxusb_vbus_status =-1;
++ }
++ #endif
++ #if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
++ if(_core_if->core_no==0 && g_usb_vbus1_trigger )
++ {
++ ifx_led_trigger_deregister(g_usb_vbus1_trigger);
++ g_usb_vbus1_trigger = NULL;
++ ifxusb_vbus1_status =-1;
++ }
++ #endif
++ #if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
++ if(_core_if->core_no==1 && g_usb_vbus2_trigger )
++ {
++ ifx_led_trigger_deregister(g_usb_vbus2_trigger);
++ g_usb_vbus2_trigger = NULL;
++ ifxusb_vbus2_status =-1;
++ }
++ #endif
++
++ #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
++ /* == 20100712 AVM/WK use gpio_inited as bitmask == */
++ if((ifxusb_vbus_gpio_inited & (1<<_core_if->core_no)) == ifxusb_vbus_gpio_inited)
++ {
++ ifx_gpio_deregister(IFX_GPIO_MODULE_USB);
++ #ifdef IFX_GPIO_USB_VBUS
++ ifxusb_vbus_status =-1;
++ #endif //IFX_GPIO_USB_VBUS
++ #ifdef IFX_GPIO_USB_VBUS1
++ ifxusb_vbus1_status=-1;
++ #endif //IFX_GPIO_USB_VBUS1
++ #ifdef IFX_GPIO_USB_VBUS2
++ ifxusb_vbus2_status=-1;
++ #endif //IFX_GPIO_USB_VBUS2
++ }
++ ifxusb_vbus_gpio_inited &= ~(1<<_core_if->core_no);
++ #endif //defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
++ #endif //defined(__UEIP__)
++}
++
++
++/*!
++ \brief Turn on the USB 5V VBus Power
++ \param _core_if Pointer of core_if structure
++ */
++void ifxusb_vbus_on(ifxusb_core_if_t *_core_if)
++{
++ IFX_DEBUGP("SENDING VBus POWER UP\n");
++ #if defined(__UEIP__)
++ #if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
++ if ( g_usb_vbus_trigger && ifxusb_vbus_status==0)
++ {
++ ifx_led_trigger_activate(g_usb_vbus_trigger);
++ IFX_DEBUGP("Enable USB power!!\n");
++ ifxusb_vbus_status=1;
++ }
++ #endif
++ #if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
++ if(_core_if->core_no==0 && g_usb_vbus1_trigger && ifxusb_vbus1_status==0)
++ {
++ ifx_led_trigger_activate(g_usb_vbus1_trigger);
++ IFX_DEBUGP("Enable USB1 power!!\n");
++ ifxusb_vbus1_status=1;
++ }
++ #endif
++ #if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
++ if(_core_if->core_no==1 && g_usb_vbus2_trigger && ifxusb_vbus2_status==0)
++ {
++ ifx_led_trigger_activate(g_usb_vbus2_trigger);
++ IFX_DEBUGP("Enable USB2 power!!\n");
++ ifxusb_vbus2_status=1;
++ }
++ #endif
++
++ #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
++ if(ifxusb_vbus_gpio_inited)
++ {
++ #if defined(IFX_GPIO_USB_VBUS)
++ if(ifxusb_vbus_status==0)
++ {
++ ifx_gpio_output_set(IFX_GPIO_USB_VBUS,IFX_GPIO_MODULE_USB);
++ ifxusb_vbus_status=1;
++ }
++ #endif
++ #if defined(IFX_GPIO_USB_VBUS1)
++ if(_core_if->core_no==0 && ifxusb_vbus1_status==0)
++ {
++ ifx_gpio_output_set(IFX_GPIO_USB_VBUS1,IFX_GPIO_MODULE_USB);
++ ifxusb_vbus1_status=1;
++ }
++ #endif
++ #if defined(IFX_GPIO_USB_VBUS2)
++ if(_core_if->core_no==1 && ifxusb_vbus2_status==0)
++ {
++ ifx_gpio_output_set(IFX_GPIO_USB_VBUS2,IFX_GPIO_MODULE_USB);
++ ifxusb_vbus2_status=1;
++ }
++ #endif
++ }
++ #endif //defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
++ #else
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ ifxusb_vbus_status=1;
++ //usb_set_vbus_on();
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ #if defined(__IS_AMAZON_SE__)
++ set_bit (4, (volatile unsigned long *)AMAZON_SE_GPIO_P0_OUT);
++ ifxusb_vbus_status=1;
++ #endif //defined(__IS_AMAZON_SE__)
++ #if defined(__IS_AR9__)
++ if(_core_if->core_no==0)
++ {
++ if (bsp_port_reserve_pin(1, 13, PORT_MODULE_USB) != 0)
++ {
++ IFX_PRINT("Can't enable USB1 5.5V power!!\n");
++ return;
++ }
++ bsp_port_clear_altsel0(1, 13, PORT_MODULE_USB);
++ bsp_port_clear_altsel1(1, 13, PORT_MODULE_USB);
++ bsp_port_set_dir_out(1, 13, PORT_MODULE_USB);
++ bsp_port_set_pudsel(1, 13, PORT_MODULE_USB);
++ bsp_port_set_puden(1, 13, PORT_MODULE_USB);
++ bsp_port_set_output(1, 13, PORT_MODULE_USB);
++ IFX_DEBUGP("Enable USB1 power!!\n");
++ ifxusb_vbus1_status=1;
++ }
++ else
++ {
++ if (bsp_port_reserve_pin(3, 4, PORT_MODULE_USB) != 0)
++ {
++ IFX_PRINT("Can't enable USB2 5.5V power!!\n");
++ return;
++ }
++ bsp_port_clear_altsel0(3, 4, PORT_MODULE_USB);
++ bsp_port_clear_altsel1(3, 4, PORT_MODULE_USB);
++ bsp_port_set_dir_out(3, 4, PORT_MODULE_USB);
++ bsp_port_set_pudsel(3, 4, PORT_MODULE_USB);
++ bsp_port_set_puden(3, 4, PORT_MODULE_USB);
++ bsp_port_set_output(3, 4, PORT_MODULE_USB);
++ IFX_DEBUGP("Enable USB2 power!!\n");
++ ifxusb_vbus2_status=1;
++ }
++ #endif //defined(__IS_AR9__)
++ #if defined(__IS_VR9__)
++ if(_core_if->core_no==0)
++ {
++ ifxusb_vbus1_status=1;
++ }
++ else
++ {
++ ifxusb_vbus2_status=1;
++ }
++ #endif //defined(__IS_VR9__)
++ #endif //defined(__UEIP__)
++}
++
++
++/*!
++ \brief Turn off the USB 5V VBus Power
++ \param _core_if Pointer of core_if structure
++ */
++void ifxusb_vbus_off(ifxusb_core_if_t *_core_if)
++{
++ IFX_DEBUGP("SENDING VBus POWER OFF\n");
++
++ #if defined(__UEIP__)
++ #if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
++ if ( g_usb_vbus_trigger && ifxusb_vbus_status==1)
++ {
++ ifx_led_trigger_deactivate(g_usb_vbus_trigger);
++ IFX_DEBUGP("Disable USB power!!\n");
++ ifxusb_vbus_status=0;
++ }
++ #endif
++ #if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
++ if(_core_if->core_no==0 && g_usb_vbus1_trigger && ifxusb_vbus1_status==1)
++ {
++ ifx_led_trigger_deactivate(g_usb_vbus1_trigger);
++ IFX_DEBUGP("Disable USB1 power!!\n");
++ ifxusb_vbus1_status=0;
++ }
++ #endif
++ #if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
++ if(_core_if->core_no==1 && g_usb_vbus2_trigger && ifxusb_vbus2_status==1)
++ {
++ ifx_led_trigger_deactivate(g_usb_vbus2_trigger);
++ IFX_DEBUGP("Disable USB2 power!!\n");
++ ifxusb_vbus2_status=0;
++ }
++ #endif
++
++ #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
++ if(ifxusb_vbus_gpio_inited)
++ {
++ #if defined(IFX_GPIO_USB_VBUS)
++ if(ifxusb_vbus_status==1)
++ {
++ ifx_gpio_output_clear(IFX_GPIO_USB_VBUS,IFX_GPIO_MODULE_USB);
++ ifxusb_vbus_status=0;
++ }
++ #endif
++ #if defined(IFX_GPIO_USB_VBUS1)
++ if(_core_if->core_no==0 && ifxusb_vbus1_status==1)
++ {
++ ifx_gpio_output_clear(IFX_GPIO_USB_VBUS1,IFX_GPIO_MODULE_USB);
++ ifxusb_vbus1_status=0;
++ }
++ #endif
++ #if defined(IFX_GPIO_USB_VBUS2)
++ if(_core_if->core_no==1 && ifxusb_vbus2_status==1)
++ {
++ ifx_gpio_output_clear(IFX_GPIO_USB_VBUS2,IFX_GPIO_MODULE_USB);
++ ifxusb_vbus2_status=0;
++ }
++ #endif
++ }
++ #endif //defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
++ #else
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ ifxusb_vbus_status=0;
++ //usb_set_vbus_on();
++ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++ #if defined(__IS_AMAZON_SE__)
++ clear_bit (4, (volatile unsigned long *)AMAZON_SE_GPIO_P0_OUT);
++ ifxusb_vbus_status=0;
++ #endif //defined(__IS_AMAZON_SE__)
++ #if defined(__IS_AR9__)
++ if(_core_if->core_no==0)
++ {
++ if (bsp_port_reserve_pin(1, 13, PORT_MODULE_USB) != 0) {
++ IFX_PRINT("Can't Disable USB1 5.5V power!!\n");
++ return;
++ }
++ bsp_port_clear_altsel0(1, 13, PORT_MODULE_USB);
++ bsp_port_clear_altsel1(1, 13, PORT_MODULE_USB);
++ bsp_port_set_dir_out(1, 13, PORT_MODULE_USB);
++ bsp_port_set_pudsel(1, 13, PORT_MODULE_USB);
++ bsp_port_set_puden(1, 13, PORT_MODULE_USB);
++ bsp_port_clear_output(1, 13, PORT_MODULE_USB);
++ IFX_DEBUGP("Disable USB1 power!!\n");
++ ifxusb_vbus1_status=0;
++ }
++ else
++ {
++ if (bsp_port_reserve_pin(3, 4, PORT_MODULE_USB) != 0) {
++ IFX_PRINT("Can't Disable USB2 5.5V power!!\n");
++ return;
++ }
++ bsp_port_clear_altsel0(3, 4, PORT_MODULE_USB);
++ bsp_port_clear_altsel1(3, 4, PORT_MODULE_USB);
++ bsp_port_set_dir_out(3, 4, PORT_MODULE_USB);
++ bsp_port_set_pudsel(3, 4, PORT_MODULE_USB);
++ bsp_port_set_puden(3, 4, PORT_MODULE_USB);
++ bsp_port_clear_output(3, 4, PORT_MODULE_USB);
++ IFX_DEBUGP("Disable USB2 power!!\n");
++
++ ifxusb_vbus2_status=0;
++ }
++ #endif //defined(__IS_AR9__)
++ #if defined(__IS_VR9__)
++ if(_core_if->core_no==0)
++ {
++ ifxusb_vbus1_status=0;
++ }
++ else
++ {
++ ifxusb_vbus2_status=0;
++ }
++ #endif //defined(__IS_VR9__)
++ #endif //defined(__UEIP__)
++}
++
++
++
++/*!
++ \brief Read Current VBus status
++ \param _core_if Pointer of core_if structure
++ */
++int ifxusb_vbus(ifxusb_core_if_t *_core_if)
++{
++#if defined(__UEIP__)
++ #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
++ return (ifxusb_vbus_status);
++ #endif
++
++ #if defined(IFX_GPIO_USB_VBUS1) || defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
++ if(_core_if->core_no==0)
++ return (ifxusb_vbus1_status);
++ #endif
++
++ #if defined(IFX_GPIO_USB_VBUS2) || defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
++ if(_core_if->core_no==1)
++ return (ifxusb_vbus2_status);
++ #endif
++#else //defined(__UEIP__)
++#endif
++ return -1;
++}
++
++#if defined(__UEIP__)
++#else
++ #if defined(__IS_TWINPASS__)
++ #define ADSL_BASE 0x20000
++ #define CRI_BASE 0x31F00
++ #define CRI_CCR0 CRI_BASE + 0x00
++ #define CRI_CCR1 CRI_BASE + 0x01*4
++ #define CRI_CDC0 CRI_BASE + 0x02*4
++ #define CRI_CDC1 CRI_BASE + 0x03*4
++ #define CRI_RST CRI_BASE + 0x04*4
++ #define CRI_MASK0 CRI_BASE + 0x05*4
++ #define CRI_MASK1 CRI_BASE + 0x06*4
++ #define CRI_MASK2 CRI_BASE + 0x07*4
++ #define CRI_STATUS0 CRI_BASE + 0x08*4
++ #define CRI_STATUS1 CRI_BASE + 0x09*4
++ #define CRI_STATUS2 CRI_BASE + 0x0A*4
++ #define CRI_AMASK0 CRI_BASE + 0x0B*4
++ #define CRI_AMASK1 CRI_BASE + 0x0C*4
++ #define CRI_UPDCTL CRI_BASE + 0x0D*4
++ #define CRI_MADST CRI_BASE + 0x0E*4
++ // 0x0f is missing
++ #define CRI_EVENT0 CRI_BASE + 0x10*4
++ #define CRI_EVENT1 CRI_BASE + 0x11*4
++ #define CRI_EVENT2 CRI_BASE + 0x12*4
++
++ #define IRI_I_ENABLE 0x32000
++ #define STY_SMODE 0x3c004
++ #define AFE_TCR_0 0x3c0dc
++ #define AFE_ADDR_ADDR 0x3c0e8
++ #define AFE_RDATA_ADDR 0x3c0ec
++ #define AFE_WDATA_ADDR 0x3c0f0
++ #define AFE_CONFIG 0x3c0f4
++ #define AFE_SERIAL_CFG 0x3c0fc
++
++ #define DFE_BASE_ADDR 0xBE116000
++ //#define DFE_BASE_ADDR 0x9E116000
++
++ #define MEI_FR_ARCINT_C (DFE_BASE_ADDR + 0x0000001C)
++ #define MEI_DBG_WADDR_C (DFE_BASE_ADDR + 0x00000024)
++ #define MEI_DBG_RADDR_C (DFE_BASE_ADDR + 0x00000028)
++ #define MEI_DBG_DATA_C (DFE_BASE_ADDR + 0x0000002C)
++ #define MEI_DBG_DECO_C (DFE_BASE_ADDR + 0x00000030)
++ #define MEI_DBG_MASTER_C (DFE_BASE_ADDR + 0x0000003C)
++
++ static void WriteARCmem(uint32_t addr, uint32_t data)
++ {
++ writel(1 ,(volatile uint32_t *)MEI_DBG_MASTER_C);
++ writel(1 ,(volatile uint32_t *)MEI_DBG_DECO_C );
++ writel(addr ,(volatile uint32_t *)MEI_DBG_WADDR_C );
++ writel(data ,(volatile uint32_t *)MEI_DBG_DATA_C );
++ while( (ifxusb_rreg((volatile uint32_t *)MEI_FR_ARCINT_C) & 0x20) != 0x20 ){};
++ writel(0 ,(volatile uint32_t *)MEI_DBG_MASTER_C);
++ IFX_DEBUGP("WriteARCmem %08x %08x\n",addr,data);
++ };
++
++ static uint32_t ReadARCmem(uint32_t addr)
++ {
++ u32 data;
++ writel(1 ,(volatile uint32_t *)MEI_DBG_MASTER_C);
++ writel(1 ,(volatile uint32_t *)MEI_DBG_DECO_C );
++ writel(addr ,(volatile uint32_t *)MEI_DBG_RADDR_C );
++ while( (ifxusb_rreg((volatile uint32_t *)MEI_FR_ARCINT_C) & 0x20) != 0x20 ){};
++ data = ifxusb_rreg((volatile uint32_t *)MEI_DBG_DATA_C );
++ writel(0 ,(volatile uint32_t *)MEI_DBG_MASTER_C);
++ IFX_DEBUGP("ReadARCmem %08x %08x\n",addr,data);
++ return data;
++ };
++
++ void ifxusb_enable_afe_oc(void)
++ {
++ /* Start the clock */
++ WriteARCmem(CRI_UPDCTL ,0x00000008);
++ WriteARCmem(CRI_CCR0 ,0x00000014);
++ WriteARCmem(CRI_CCR1 ,0x00000500);
++ WriteARCmem(AFE_CONFIG ,0x000001c8);
++ WriteARCmem(AFE_SERIAL_CFG,0x00000016); // (DANUBE_PCI_CFG_BASE+(1<<addrline))AFE serial interface clock & data latch edge
++ WriteARCmem(AFE_TCR_0 ,0x00000002);
++ //Take afe out of reset
++ WriteARCmem(AFE_CONFIG ,0x000000c0);
++ WriteARCmem(IRI_I_ENABLE ,0x00000101);
++ WriteARCmem(STY_SMODE ,0x00001980);
++
++ ReadARCmem(CRI_UPDCTL );
++ ReadARCmem(CRI_CCR0 );
++ ReadARCmem(CRI_CCR1 );
++ ReadARCmem(AFE_CONFIG );
++ ReadARCmem(AFE_SERIAL_CFG); // (DANUBE_PCI_CFG_BASE+(1<<addrline))AFE serial interface clock & data latch edge
++ ReadARCmem(AFE_TCR_0 );
++ ReadARCmem(AFE_CONFIG );
++ ReadARCmem(IRI_I_ENABLE );
++ ReadARCmem(STY_SMODE );
++ }
++ #endif //defined(__IS_TWINPASS__)
++#endif //defined(__UEIP__)
++
++
+diff --git a/drivers/usb/ifxhcd/ifxusb_ctl.c b/drivers/usb/ifxhcd/ifxusb_ctl.c
+new file mode 100644
+index 0000000..ade8e13
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxusb_ctl.c
+@@ -0,0 +1,1385 @@
++/*****************************************************************************
++ ** FILE NAME : ifxusb_ctl.c
++ ** PROJECT : IFX USB sub-system V3
++ ** MODULES : IFX USB sub-system Host and Device driver
++ ** SRC VERSION : 1.0
++ ** DATE : 1/Jan/2009
++ ** AUTHOR : Chen, Howard
++ ** DESCRIPTION : Implementing the procfs and sysfs for IFX USB driver
++ *****************************************************************************/
++
++/*! \file ifxusb_ctl.c
++ \ingroup IFXUSB_DRIVER_V3
++ \brief Implementing the procfs and sysfs for IFX USB driver
++*/
++
++#include <linux/version.h>
++#include "ifxusb_version.h"
++
++
++#include <linux/proc_fs.h>
++#include <asm/byteorder.h>
++#include <asm/unaligned.h>
++#include <asm/uaccess.h>
++
++#include "ifxusb_plat.h"
++#include "ifxusb_regs.h"
++#include "ifxusb_cif.h"
++
++#ifdef __IS_DEVICE__
++ #include "ifxpcd.h"
++#endif
++
++#ifdef __IS_HOST__
++ #include "ifxhcd.h"
++#endif
++
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/gfp.h>
++
++
++#ifdef __IS_HOST__
++ extern char ifxusb_driver_name[];
++
++ #ifdef __IS_DUAL__
++ extern ifxhcd_hcd_t ifxusb_hcd_1;
++ extern ifxhcd_hcd_t ifxusb_hcd_2;
++ extern char ifxusb_hcd_name_1[];
++ extern char ifxusb_hcd_name_2[];
++ #else
++ extern ifxhcd_hcd_t ifxusb_hcd;
++ extern char ifxusb_hcd_name[];
++ #endif
++
++#endif
++
++#ifdef __IS_DEVICE__
++ extern char ifxusb_driver_name[];
++
++ extern ifxpcd_pcd_t ifxusb_pcd;
++ extern char ifxusb_pcd_name[];
++#endif
++
++
++//Attributes for sysfs (for 2.6 only)
++
++extern struct device_attribute dev_attr_dbglevel;
++
++#ifdef __IS_DUAL__
++ extern struct device_attribute dev_attr_dump_params_1;
++ extern struct device_attribute dev_attr_dump_params_2;
++#else
++ extern struct device_attribute dev_attr_dump_params;
++#endif
++
++#ifdef __IS_DUAL__
++ extern struct device_attribute dev_attr_mode_1;
++ extern struct device_attribute dev_attr_mode_2;
++#else
++ extern struct device_attribute dev_attr_mode;
++#endif
++
++#ifdef __IS_HOST__
++ #ifdef __IS_DUAL__
++ extern struct device_attribute dev_attr_buspower_1;
++ extern struct device_attribute dev_attr_buspower_2;
++ extern struct device_attribute dev_attr_bussuspend_1;
++ extern struct device_attribute dev_attr_bussuspend_2;
++ extern struct device_attribute dev_attr_busconnected_1;
++ extern struct device_attribute dev_attr_busconnected_2;
++ extern struct device_attribute dev_attr_connectspeed_1;
++ extern struct device_attribute dev_attr_connectspeed_1;
++ #else
++ extern struct device_attribute dev_attr_buspower;
++ extern struct device_attribute dev_attr_bussuspend;
++ extern struct device_attribute dev_attr_busconnected;
++ extern struct device_attribute dev_attr_connectspeed;
++ #endif
++#endif //__IS_HOST__
++
++#ifdef __IS_DEVICE__
++ extern struct device_attribute dev_attr_devspeed;
++ extern struct device_attribute dev_attr_enumspeed;
++#endif //__IS_DEVICE__
++
++#ifdef __ENABLE_DUMP__
++ #ifdef __IS_DUAL__
++ extern struct device_attribute dev_attr_dump_reg_1;
++ extern struct device_attribute dev_attr_dump_reg_2;
++ extern struct device_attribute dev_attr_dump_spram_1;
++ extern struct device_attribute dev_attr_dump_spram_2;
++ #ifdef __IS_HOST__
++ extern struct device_attribute dev_attr_dump_host_state_1;
++ extern struct device_attribute dev_attr_dump_host_state_2;
++ #else
++ #endif
++ #else
++ extern struct device_attribute dev_attr_dump_reg;
++ extern struct device_attribute dev_attr_dump_spram;
++ #ifdef __IS_HOST__
++ extern struct device_attribute dev_attr_dump_host_state;
++ #else
++ #endif
++ #endif
++#endif //__ENABLE_DUMP__
++
++
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++
++static ssize_t procfs_dbglevel_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++{
++ #ifdef __IS_HOST__
++ return sprintf( buf, "%08X\n",h_dbg_lvl );
++ #else
++ return sprintf( buf, "%08X\n",d_dbg_lvl );
++ #endif
++}
++
++static ssize_t procfs_dbglevel_store(struct file *file, const char *buffer, unsigned long count, void *data)
++{
++ char buf[10];
++ int i = 0;
++ uint32_t value;
++ if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
++ return -EFAULT;
++ value = simple_strtoul(buf, NULL, 16);
++ #ifdef __IS_HOST__
++ h_dbg_lvl =value;
++ #else
++ d_dbg_lvl =value;
++ #endif
++ //turn on and off power
++ return count;
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_dbglevel_show( struct device *_dev, struct device_attribute *attr,char *buf)
++#else
++ static ssize_t sysfs_dbglevel_show( struct device *_dev, char *buf)
++#endif
++{
++ #ifdef __IS_HOST__
++ return sprintf( buf, "%08X\n",h_dbg_lvl );
++ #else
++ return sprintf( buf, "%08X\n",d_dbg_lvl );
++ #endif
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_dbglevel_store( struct device *_dev, struct device_attribute *attr,const char *buffer, size_t count )
++#else
++ static ssize_t sysfs_dbglevel_store( struct device *_dev, const char *buffer, size_t count )
++#endif
++{
++ char buf[10];
++ int i = 0;
++ uint32_t value;
++ if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
++ return -EFAULT;
++ value = simple_strtoul(buf, NULL, 16);
++ #ifdef __IS_HOST__
++ h_dbg_lvl =value;
++ #else
++ d_dbg_lvl =value;
++ #endif
++ //turn on and off power
++ return count;
++}
++
++DEVICE_ATTR(dbglevel, S_IRUGO|S_IWUSR, sysfs_dbglevel_show, sysfs_dbglevel_store);
++
++
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++
++static void ifxusb_dump_params(ifxusb_core_if_t *_core_if);
++
++#ifdef __IS_DUAL__
++ static void dump_params_1(void)
++ {
++ ifxusb_dump_params(&ifxusb_hcd_1.core_if);
++ }
++ static void dump_params_2(void)
++ {
++ ifxusb_dump_params(&ifxusb_hcd_2.core_if);
++ }
++
++ static ssize_t procfs_dump_params_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ dump_params_1();
++ return 0;
++ }
++ static ssize_t procfs_dump_params_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ dump_params_2();
++ return 0;
++ }
++
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_dump_params_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_dump_params_show_1( struct device *_dev,char *buf)
++ #endif
++ {
++ dump_params_1();
++ return 0;
++ }
++ DEVICE_ATTR(dump_params_1, S_IRUGO|S_IWUSR, sysfs_dump_params_show_1, NULL);
++
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_dump_params_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_dump_params_show_2( struct device *_dev,char *buf)
++ #endif
++ {
++ dump_params_2();
++ return 0;
++ }
++
++ DEVICE_ATTR(dump_params_2, S_IRUGO|S_IWUSR, sysfs_dump_params_show_2, NULL);
++#else
++ static void dump_params(void)
++ {
++ #ifdef __IS_HOST__
++ ifxusb_dump_params(&ifxusb_hcd.core_if);
++ #else
++ ifxusb_dump_params(&ifxusb_pcd.core_if);
++ #endif
++ }
++
++ static ssize_t procfs_dump_params_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ dump_params();
++ return 0;
++ }
++
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_dump_params_show( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_dump_params_show( struct device *_dev,char *buf)
++ #endif
++ {
++ dump_params();
++ return 0;
++ }
++ DEVICE_ATTR(dump_params, S_IRUGO|S_IWUSR, sysfs_dump_params_show, NULL);
++#endif
++
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++
++#ifdef __IS_DUAL__
++ static ssize_t mode_show_1(char *buf)
++ {
++ if((ifxusb_rreg(&ifxusb_hcd_1.core_if.core_global_regs->gintsts ) & 0x1) == 1)
++ return sprintf( buf, "HOST\n" );
++ else
++ return sprintf( buf, "DEVICE(INCORRECT!)\n" );
++ }
++
++ static ssize_t mode_show_2(char *buf)
++ {
++ if((ifxusb_rreg(&ifxusb_hcd_2.core_if.core_global_regs->gintsts ) & 0x1) == 1)
++ return sprintf( buf, "HOST\n" );
++ else
++ return sprintf( buf, "DEVICE(INCORRECT!)\n" );
++ }
++
++ static ssize_t procfs_mode_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ return mode_show_1(buf);
++ }
++ static ssize_t procfs_mode_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ return mode_show_2(buf);
++ }
++
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_mode_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_mode_show_1( struct device *_dev,char *buf)
++ #endif
++ {
++ return mode_show_1(buf);
++ }
++
++ DEVICE_ATTR(mode_1, S_IRUGO|S_IWUSR, sysfs_mode_show_1, 0);
++
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_mode_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_mode_show_2( struct device *_dev,char *buf)
++ #endif
++ {
++ return mode_show_2(buf);
++ }
++ DEVICE_ATTR(mode_2, S_IRUGO|S_IWUSR, sysfs_mode_show_2, NULL);
++#else
++ static ssize_t mode_show(char *buf)
++ {
++ #ifdef __IS_HOST__
++ if((ifxusb_rreg(&ifxusb_hcd.core_if.core_global_regs->gintsts ) & 0x1) == 1)
++ return sprintf( buf, "HOST\n" );
++ else
++ return sprintf( buf, "DEVICE(INCORRECT!)\n" );
++ #else
++ if((ifxusb_rreg(&ifxusb_pcd.core_if.core_global_regs->gintsts ) & 0x1) != 1)
++ return sprintf( buf, "DEVICE\n" );
++ else
++ return sprintf( buf, "HOST(INCORRECT!)\n" );
++ #endif
++ }
++ static ssize_t procfs_mode_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ return mode_show(buf);
++ }
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_mode_show( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_mode_show( struct device *_dev, char *buf)
++ #endif
++ {
++ return mode_show(buf);
++ }
++ DEVICE_ATTR(mode, S_IRUGO|S_IWUSR, sysfs_mode_show, NULL);
++#endif
++
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++
++#ifdef __IS_HOST__
++ #ifdef __IS_DUAL__
++ static ssize_t buspower_show_1(char *buf)
++ {
++ if(ifxusb_vbus (&ifxusb_hcd_1.core_if)==1) return sprintf( buf, "1\n" );
++ if(ifxusb_vbus (&ifxusb_hcd_1.core_if)==0) return sprintf( buf, "0\n" );
++ return sprintf( buf, "UNKNOWN\n" );
++ }
++ static void buspower_store_1(uint32_t value)
++ {
++ if (value==1) ifxusb_vbus_on (&ifxusb_hcd_1.core_if);
++ else if(value==0) ifxusb_vbus_off(&ifxusb_hcd_1.core_if);
++ }
++ static ssize_t buspower_show_2(char *buf)
++ {
++ if(ifxusb_vbus (&ifxusb_hcd_2.core_if)==1) return sprintf( buf, "1\n" );
++ if(ifxusb_vbus (&ifxusb_hcd_2.core_if)==0) return sprintf( buf, "0\n" );
++ return sprintf( buf, "UNKNOWN\n" );
++ }
++ static void buspower_store_2(uint32_t value)
++ {
++ if (value==1) ifxusb_vbus_on (&ifxusb_hcd_2.core_if);
++ else if(value==0) ifxusb_vbus_off(&ifxusb_hcd_2.core_if);
++ }
++ static ssize_t procfs_buspower_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ return buspower_show_1(buf);
++ }
++ static ssize_t procfs_buspower_store_1(struct file *file, const char *buffer, unsigned long count, void *data)
++ {
++ char buf[10];
++ int i = 0;
++ uint32_t value;
++ if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
++ return -EFAULT;
++ value = simple_strtoul(buf, NULL, 16);
++ buspower_store_1(value);
++ return count;
++ }
++ static ssize_t procfs_buspower_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ return buspower_show_2(buf);
++ }
++ static ssize_t procfs_buspower_store_2(struct file *file, const char *buffer, unsigned long count, void *data)
++ {
++ char buf[10];
++ int i = 0;
++ uint32_t value;
++ if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
++ return -EFAULT;
++ value = simple_strtoul(buf, NULL, 16);
++ buspower_store_2(value);
++ return count;
++ }
++
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_buspower_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_buspower_show_1( struct device *_dev,char *buf)
++ #endif
++ {
++ return buspower_show_1(buf);
++ }
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_buspower_store_1( struct device *_dev, struct device_attribute *attr,const char *buffer, size_t count )
++ #else
++ static ssize_t sysfs_buspower_store_1( struct device *_dev, const char *buffer, size_t count )
++ #endif
++ {
++ char buf[10];
++ int i = 0;
++ uint32_t value;
++ if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
++ return -EFAULT;
++ value = simple_strtoul(buf, NULL, 16);
++ buspower_store_1(value);
++ return count;
++ }
++ DEVICE_ATTR(buspower_1, S_IRUGO|S_IWUSR, sysfs_buspower_show_1, sysfs_buspower_store_1);
++
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_buspower_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_buspower_show_2( struct device *_dev,char *buf)
++ #endif
++ {
++ return buspower_show_2(buf);
++ }
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_buspower_store_2( struct device *_dev, struct device_attribute *attr,const char *buffer, size_t count )
++ #else
++ static ssize_t sysfs_buspower_store_2( struct device *_dev, const char *buffer, size_t count )
++ #endif
++ {
++ char buf[10];
++ int i = 0;
++ uint32_t value;
++ if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
++ return -EFAULT;
++ value = simple_strtoul(buf, NULL, 16);
++ buspower_store_2(value);
++ return count;
++ }
++ DEVICE_ATTR(buspower_2, S_IRUGO|S_IWUSR, sysfs_buspower_show_2, sysfs_buspower_store_2);
++ #else
++ static ssize_t buspower_show(char *buf)
++ {
++ if(ifxusb_vbus (&ifxusb_hcd.core_if)==1) return sprintf( buf, "1\n" );
++ if(ifxusb_vbus (&ifxusb_hcd.core_if)==0) return sprintf( buf, "0\n" );
++ return sprintf( buf, "UNKNOWN\n" );
++ }
++ static void buspower_store(uint32_t value)
++ {
++ if (value==1) ifxusb_vbus_on (&ifxusb_hcd.core_if);
++ else if(value==0) ifxusb_vbus_off(&ifxusb_hcd.core_if);
++ }
++ static ssize_t procfs_buspower_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ return buspower_show(buf);
++ }
++ static ssize_t procfs_buspower_store(struct file *file, const char *buffer, unsigned long count, void *data)
++ {
++ char buf[10];
++ int i = 0;
++ uint32_t value;
++ if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
++ return -EFAULT;
++ value = simple_strtoul(buf, NULL, 16);
++ buspower_store(value);
++ return count;
++ }
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_buspower_show( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_buspower_show( struct device *_dev, char *buf)
++ #endif
++ {
++ return buspower_show(buf);
++ }
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_buspower_store( struct device *_dev, struct device_attribute *attr,const char *buffer, size_t count )
++ #else
++ static ssize_t sysfs_buspower_store( struct device *_dev, const char *buffer, size_t count )
++ #endif
++ {
++ char buf[10];
++ int i = 0;
++ uint32_t value;
++ if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
++ return -EFAULT;
++ value = simple_strtoul(buf, NULL, 16);
++ buspower_store(value);
++ return count;
++ }
++ DEVICE_ATTR(buspower, S_IRUGO|S_IWUSR, sysfs_buspower_show, sysfs_buspower_store);
++ #endif
++
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++
++
++ #ifdef __IS_DUAL__
++ static ssize_t bussuspend_show_1(char *buf)
++ {
++ hprt0_data_t val;
++ val.d32 = ifxusb_rreg(ifxusb_hcd_1.core_if.hprt0);
++ return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp);
++ }
++ static ssize_t bussuspend_show_2(char *buf)
++ {
++ hprt0_data_t val;
++ val.d32 = ifxusb_rreg(ifxusb_hcd_2.core_if.hprt0);
++ return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp);
++ }
++
++ static ssize_t procfs_bussuspend_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ return bussuspend_show_1(buf);
++ }
++ static ssize_t procfs_bussuspend_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ return bussuspend_show_2(buf);
++ }
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_bussuspend_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_bussuspend_show_1( struct device *_dev,char *buf)
++ #endif
++ {
++ return bussuspend_show_1(buf);
++ }
++ DEVICE_ATTR(bussuspend_1, S_IRUGO|S_IWUSR, sysfs_bussuspend_show_1, 0);
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_bussuspend_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_bussuspend_show_2( struct device *_dev,char *buf)
++ #endif
++ {
++ return bussuspend_show_2(buf);
++ }
++ DEVICE_ATTR(bussuspend_2, S_IRUGO|S_IWUSR, sysfs_bussuspend_show_2, 0);
++ #else
++ static ssize_t bussuspend_show(char *buf)
++ {
++ hprt0_data_t val;
++ val.d32 = ifxusb_rreg(ifxusb_hcd.core_if.hprt0);
++ return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp);
++ }
++ static ssize_t procfs_bussuspend_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ return bussuspend_show(buf);
++ }
++
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_bussuspend_show( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_bussuspend_show( struct device *_dev, char *buf)
++ #endif
++ {
++ return bussuspend_show(buf);
++ }
++ DEVICE_ATTR(bussuspend, S_IRUGO|S_IWUSR, sysfs_bussuspend_show, 0);
++ #endif
++
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++
++ #ifdef __IS_DUAL__
++ static ssize_t busconnected_show_1(char *buf)
++ {
++ hprt0_data_t val;
++ val.d32 = ifxusb_rreg(ifxusb_hcd_1.core_if.hprt0);
++ return sprintf (buf, "Bus Connected = 0x%x\n", val.b.prtconnsts);
++ }
++ static ssize_t busconnected_show_2(char *buf)
++ {
++ hprt0_data_t val;
++ val.d32 = ifxusb_rreg(ifxusb_hcd_2.core_if.hprt0);
++ return sprintf (buf, "Bus Connected = 0x%x\n", val.b.prtconnsts);
++ }
++
++ static ssize_t procfs_busconnected_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ return busconnected_show_1(buf);
++ }
++ static ssize_t procfs_busconnected_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ return busconnected_show_2(buf);
++ }
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_busconnected_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_busconnected_show_1( struct device *_dev,char *buf)
++ #endif
++ {
++ return busconnected_show_1(buf);
++ }
++ DEVICE_ATTR(busconnected_1, S_IRUGO|S_IWUSR, sysfs_busconnected_show_1, 0);
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_busconnected_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_busconnected_show_2( struct device *_dev,char *buf)
++ #endif
++ {
++ return busconnected_show_2(buf);
++ }
++ DEVICE_ATTR(busconnected_2, S_IRUGO|S_IWUSR, sysfs_busconnected_show_2, 0);
++ #else
++ static ssize_t busconnected_show(char *buf)
++ {
++ hprt0_data_t val;
++ val.d32 = ifxusb_rreg(ifxusb_hcd.core_if.hprt0);
++ return sprintf (buf, "Bus Connected = 0x%x\n", val.b.prtconnsts);
++ }
++ static ssize_t procfs_busconnected_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ return busconnected_show(buf);
++ }
++
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_busconnected_show( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_busconnected_show( struct device *_dev, char *buf)
++ #endif
++ {
++ return busconnected_show(buf);
++ }
++ DEVICE_ATTR(busconnected, S_IRUGO|S_IWUSR, sysfs_busconnected_show, 0);
++ #endif
++
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++
++ #ifdef __IS_DUAL__
++ static ssize_t connectspeed_show_1(char *buf)
++ {
++ hprt0_data_t val;
++ val.d32 = ifxusb_rreg(ifxusb_hcd_1.core_if.hprt0);
++ if( val.b.prtspd ==0) return sprintf (buf, "Bus Speed = High (%d)\n", val.b.prtspd);
++ if( val.b.prtspd ==1) return sprintf (buf, "Bus Speed = Full (%d)\n", val.b.prtspd);
++ if( val.b.prtspd ==2) return sprintf (buf, "Bus Speed = Low (%d)\n", val.b.prtspd);
++ return sprintf (buf, "Bus Speed = Unknown (%d)\n", val.b.prtspd);
++ }
++ static ssize_t connectspeed_show_2(char *buf)
++ {
++ hprt0_data_t val;
++ val.d32 = ifxusb_rreg(ifxusb_hcd_2.core_if.hprt0);
++ if( val.b.prtspd ==0) return sprintf (buf, "Bus Speed = High (%d)\n", val.b.prtspd);
++ if( val.b.prtspd ==1) return sprintf (buf, "Bus Speed = Full (%d)\n", val.b.prtspd);
++ if( val.b.prtspd ==2) return sprintf (buf, "Bus Speed = Low (%d)\n", val.b.prtspd);
++ return sprintf (buf, "Bus Speed = Unknown (%d)\n", val.b.prtspd);
++ }
++
++ static ssize_t procfs_connectspeed_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ return connectspeed_show_1(buf);
++ }
++ static ssize_t procfs_connectspeed_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ return connectspeed_show_2(buf);
++ }
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_connectspeed_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_connectspeed_show_1( struct device *_dev,char *buf)
++ #endif
++ {
++ return connectspeed_show_1(buf);
++ }
++ DEVICE_ATTR(connectspeed_1, S_IRUGO|S_IWUSR, sysfs_connectspeed_show_1, 0);
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_connectspeed_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_connectspeed_show_2( struct device *_dev,char *buf)
++ #endif
++ {
++ return connectspeed_show_2(buf);
++ }
++ DEVICE_ATTR(connectspeed_2, S_IRUGO|S_IWUSR, sysfs_connectspeed_show_2, 0);
++ #else
++ static ssize_t connectspeed_show(char *buf)
++ {
++ hprt0_data_t val;
++ val.d32 = ifxusb_rreg(ifxusb_hcd.core_if.hprt0);
++ if( val.b.prtspd ==0) return sprintf (buf, "Bus Speed = High (%d)\n", val.b.prtspd);
++ if( val.b.prtspd ==1) return sprintf (buf, "Bus Speed = Full (%d)\n", val.b.prtspd);
++ if( val.b.prtspd ==2) return sprintf (buf, "Bus Speed = Low (%d)\n", val.b.prtspd);
++ return sprintf (buf, "Bus Speed = Unknown (%d)\n", val.b.prtspd);
++ }
++
++ static ssize_t procfs_connectspeed_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ return connectspeed_show(buf);
++ }
++
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_connectspeed_show( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_connectspeed_show( struct device *_dev, char *buf)
++ #endif
++ {
++ return connectspeed_show(buf);
++ }
++ DEVICE_ATTR(connectspeed, S_IRUGO|S_IWUSR, sysfs_connectspeed_show, 0);
++ #endif
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++#endif
++
++
++#ifdef __IS_DEVICE__
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++ static ssize_t devspeed_show(char *buf)
++ {
++ dcfg_data_t val;
++ val.d32 = ifxusb_rreg(&ifxusb_pcd.core_if.dev_global_regs->dcfg);
++ if( val.b.devspd ==0) return sprintf (buf, "Dev Speed = High (%d)\n", val.b.devspd);
++ if( val.b.devspd ==1) return sprintf (buf, "Dev Speed = Full (%d)\n", val.b.devspd);
++ if( val.b.devspd ==3) return sprintf (buf, "Dev Speed = Full (%d)\n", val.b.devspd);
++ return sprintf (buf, "Dev Speed = Unknown (%d)\n", val.b.devspd);
++ }
++
++ static ssize_t procfs_devspeed_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ return devspeed_show(buf);
++ }
++
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_devspeed_show( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_devspeed_show( struct device *_dev, char *buf)
++ #endif
++ {
++ return devspeed_show(buf);
++ }
++ DEVICE_ATTR(devspeed, S_IRUGO|S_IWUSR, sysfs_devspeed_show, 0);
++
++ static ssize_t enumspeed_show(char *buf)
++ {
++ dsts_data_t val;
++ val.d32 = ifxusb_rreg(&ifxusb_pcd.core_if.dev_global_regs->dsts);
++ if( val.b.enumspd ==0) return sprintf (buf, "Enum Speed = High (%d)\n", val.b.enumspd);
++ if( val.b.enumspd ==1) return sprintf (buf, "Enum Speed = Full (%d)\n", val.b.enumspd);
++ if( val.b.enumspd ==2) return sprintf (buf, "Enum Speed = Low (%d)\n", val.b.enumspd);
++ return sprintf (buf, "Enum Speed = invalid(%d)\n", val.b.enumspd);
++ }
++
++ static ssize_t procfs_enumspeed_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ return enumspeed_show(buf);
++ }
++
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_enumspeed_show( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_enumspeed_show( struct device *_dev, char *buf)
++ #endif
++ {
++ return enumspeed_show(buf);
++ }
++ DEVICE_ATTR(enumspeed, S_IRUGO|S_IWUSR, sysfs_enumspeed_show, 0);
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++#endif
++
++
++//////////////////////////////////////////////////////////////////////////////////
++#ifdef __ENABLE_DUMP__
++
++ #ifdef __IS_DUAL__
++ static void dump_reg_1(void)
++ {
++ ifxusb_dump_registers(&ifxusb_hcd_1.core_if);
++ }
++ static void dump_reg_2(void)
++ {
++ ifxusb_dump_registers(&ifxusb_hcd_2.core_if);
++ }
++
++ static ssize_t procfs_dump_reg_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ dump_reg_1();
++ return 0;
++ }
++ static ssize_t procfs_dump_reg_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ dump_reg_2();
++ return 0;
++ }
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_dump_reg_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_dump_reg_show_1( struct device *_dev,char *buf)
++ #endif
++ {
++ dump_reg_1();
++ return 0;
++ }
++ DEVICE_ATTR(dump_reg_1, S_IRUGO|S_IWUSR, sysfs_dump_reg_show_1, 0);
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_dump_reg_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_dump_reg_show_2( struct device *_dev,char *buf)
++ #endif
++ {
++ dump_reg_2();
++ return 0;
++ }
++ DEVICE_ATTR(dump_reg_2, S_IRUGO|S_IWUSR, sysfs_dump_reg_show_2, 0);
++ #else
++ static void dump_reg(void)
++ {
++ #ifdef __IS_HOST__
++ ifxusb_dump_registers(&ifxusb_hcd.core_if);
++ #endif
++ #ifdef __IS_DEVICE__
++ ifxusb_dump_registers(&ifxusb_pcd.core_if);
++ #endif
++ }
++ static ssize_t procfs_dump_reg_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ dump_reg();
++ return 0;
++ }
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_dump_reg_show( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_dump_reg_show( struct device *_dev,char *buf)
++ #endif
++ {
++ dump_reg();
++ return 0;
++ }
++ DEVICE_ATTR(dump_reg, S_IRUGO|S_IWUSR, sysfs_dump_reg_show, 0);
++ #endif
++
++
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++
++ #ifdef __IS_DUAL__
++ static void dump_spram_1(void)
++ {
++ ifxusb_dump_spram(&ifxusb_hcd_1.core_if);
++ }
++ static void dump_spram_2(void)
++ {
++ ifxusb_dump_spram(&ifxusb_hcd_2.core_if);
++ }
++
++ static ssize_t procfs_dump_spram_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ dump_spram_1();
++ return 0;
++ }
++ static ssize_t procfs_dump_spram_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ dump_spram_2();
++ return 0;
++ }
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_dump_spram_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_dump_spram_show_1( struct device *_dev,char *buf)
++ #endif
++ {
++ dump_spram_1();
++ return 0;
++ }
++ DEVICE_ATTR(dump_spram_1, S_IRUGO|S_IWUSR, sysfs_dump_spram_show_1, 0);
++
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_dump_spram_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_dump_spram_show_2( struct device *_dev,char *buf)
++ #endif
++ {
++ dump_spram_2();
++ return 0;
++ }
++ DEVICE_ATTR(dump_spram_2, S_IRUGO|S_IWUSR, sysfs_dump_spram_show_2, 0);
++ #else
++ static void dump_spram(void)
++ {
++ #ifdef __IS_HOST__
++ ifxusb_dump_spram(&ifxusb_hcd.core_if);
++ #endif
++ #ifdef __IS_DEVICE__
++ ifxusb_dump_spram(&ifxusb_pcd.core_if);
++ #endif
++ }
++ static ssize_t procfs_dump_spram_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ dump_spram();
++ return 0;
++ }
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_dump_spram_show( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_dump_spram_show( struct device *_dev,char *buf)
++ #endif
++ {
++ dump_spram();
++ return 0;
++ }
++ DEVICE_ATTR(dump_spram, S_IRUGO|S_IWUSR, sysfs_dump_spram_show, 0);
++ #endif
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++
++ #ifdef __IS_HOST__
++ #ifdef __IS_DUAL__
++ static ssize_t procfs_dump_host_state_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ ifxhcd_dump_state(&ifxusb_hcd_1);
++ return 0;
++ }
++ static ssize_t procfs_dump_host_state_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ ifxhcd_dump_state(&ifxusb_hcd_2);
++ return 0;
++ }
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_dump_host_state_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_dump_host_state_show_1( struct device *_dev,char *buf)
++ #endif
++ {
++ ifxhcd_dump_state(&ifxusb_hcd_1);
++ return 0;
++ }
++ DEVICE_ATTR(dump_host_state_1, S_IRUGO|S_IWUSR, sysfs_dump_host_state_show_1, 0);
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_dump_host_state_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_dump_host_state_show_2( struct device *_dev,char *buf)
++ #endif
++ {
++ ifxhcd_dump_state(&ifxusb_hcd_2);
++ return 0;
++ }
++ DEVICE_ATTR(dump_host_state_2, S_IRUGO|S_IWUSR, sysfs_dump_host_state_show_2, 0);
++ #else
++ static ssize_t procfs_dump_host_state_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
++ {
++ ifxhcd_dump_state(&ifxusb_hcd);
++ return 0;
++ }
++ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ static ssize_t sysfs_dump_host_state_show( struct device *_dev, struct device_attribute *attr,char *buf)
++ #else
++ static ssize_t sysfs_dump_host_state_show( struct device *_dev,char *buf)
++ #endif
++ {
++ ifxhcd_dump_state(&ifxusb_hcd);
++ return 0;
++ }
++ DEVICE_ATTR(dump_host_state, S_IRUGO|S_IWUSR, sysfs_dump_host_state_show, 0);
++ #endif
++
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++/////////////////////////////////////////////////////////////////////////////////////////////////////
++
++ #endif //IS_HOST_
++
++#endif //__ENABLE_DUMP__
++
++//////////////////////////////////////////////////////////////////////////////////
++
++static int ifx_proc_addproc(char *funcname, read_proc_t *hookfuncr, write_proc_t *hookfuncw);
++static void ifx_proc_delproc(char *funcname);
++
++//////////////////////////////////////////////////////////////////////////////////
++
++/*!
++ \brief This function create the sysfs and procfs entries
++ \param[in] _dev Pointer of device structure, if applied
++ */
++void ifxusb_attr_create (void *_dev)
++{
++ int error;
++
++ struct device *dev = (struct device *) _dev;
++
++ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++ error = ifx_proc_addproc("dbglevel", procfs_dbglevel_show, procfs_dbglevel_store);
++ error = device_create_file(dev, &dev_attr_dbglevel);
++
++ #ifdef __IS_DUAL__
++ error = ifx_proc_addproc("dump_params_1", procfs_dump_params_show_1, NULL);
++ error = ifx_proc_addproc("dump_params_2", procfs_dump_params_show_2, NULL);
++ error = device_create_file(dev, &dev_attr_dump_params_1);
++ error = device_create_file(dev, &dev_attr_dump_params_2);
++ #else
++ error = ifx_proc_addproc("dump_params", procfs_dump_params_show, NULL);
++ error = device_create_file(dev, &dev_attr_dump_params);
++ #endif
++
++ #ifdef __IS_DUAL__
++ error = ifx_proc_addproc("mode_1", procfs_mode_show_1, NULL);
++ error = ifx_proc_addproc("mode_2", procfs_mode_show_2, NULL);
++ error = device_create_file(dev, &dev_attr_mode_1);
++ error = device_create_file(dev, &dev_attr_mode_2);
++ #else
++ error = ifx_proc_addproc("mode", procfs_mode_show, NULL);
++ error = device_create_file(dev, &dev_attr_mode);
++ #endif
++
++ #ifdef __IS_HOST__
++ #ifdef __IS_DUAL__
++ error = ifx_proc_addproc("buspower_1", procfs_buspower_show_1, procfs_buspower_store_1);
++ error = ifx_proc_addproc("buspower_2", procfs_buspower_show_2, procfs_buspower_store_2);
++ error = device_create_file(dev, &dev_attr_buspower_1);
++ error = device_create_file(dev, &dev_attr_buspower_2);
++ #else
++ error = ifx_proc_addproc("buspower", procfs_buspower_show, procfs_buspower_store);
++ error = device_create_file(dev, &dev_attr_buspower);
++ #endif
++
++ #ifdef __IS_DUAL__
++ error = ifx_proc_addproc("bussuspend_1", procfs_bussuspend_show_1, NULL);
++ error = ifx_proc_addproc("bussuspend_2", procfs_bussuspend_show_2, NULL);
++ error = device_create_file(dev, &dev_attr_bussuspend_1);
++ error = device_create_file(dev, &dev_attr_bussuspend_2);
++ #else
++ error = ifx_proc_addproc("bussuspend", procfs_bussuspend_show, NULL);
++ error = device_create_file(dev, &dev_attr_bussuspend);
++ #endif
++
++ #ifdef __IS_DUAL__
++ error = ifx_proc_addproc("busconnected_1", procfs_busconnected_show_1, NULL);
++ error = ifx_proc_addproc("busconnected_2", procfs_busconnected_show_2, NULL);
++ error = device_create_file(dev, &dev_attr_busconnected_1);
++ error = device_create_file(dev, &dev_attr_busconnected_2);
++ #else
++ error = ifx_proc_addproc("busconnected", procfs_busconnected_show, NULL);
++ error = device_create_file(dev, &dev_attr_busconnected);
++ #endif
++
++ #ifdef __IS_DUAL__
++ error = ifx_proc_addproc("connectspeed_1", procfs_connectspeed_show_1, NULL);
++ error = ifx_proc_addproc("connectspeed_2", procfs_connectspeed_show_2, NULL);
++ error = device_create_file(dev, &dev_attr_connectspeed_1);
++ error = device_create_file(dev, &dev_attr_connectspeed_2);
++ #else
++ error = ifx_proc_addproc("connectspeed", procfs_connectspeed_show, NULL);
++ error = device_create_file(dev, &dev_attr_connectspeed);
++ #endif
++ #endif
++
++ #ifdef __IS_DEVICE__
++ error = ifx_proc_addproc("devspeed", procfs_devspeed_show, NULL);
++ error = device_create_file(dev, &dev_attr_devspeed);
++ error = ifx_proc_addproc("enumspeed", procfs_enumspeed_show, NULL);
++ error = device_create_file(dev, &dev_attr_enumspeed);
++ #endif
++
++ //////////////////////////////////////////////////////
++ #ifdef __ENABLE_DUMP__
++ #ifdef __IS_DUAL__
++ error = ifx_proc_addproc("dump_reg_1", procfs_dump_reg_show_1, NULL);
++ error = ifx_proc_addproc("dump_reg_2", procfs_dump_reg_show_2, NULL);
++ error = device_create_file(dev, &dev_attr_dump_reg_1);
++ error = device_create_file(dev, &dev_attr_dump_reg_2);
++ #else
++ error = ifx_proc_addproc("dump_reg", procfs_dump_reg_show, NULL);
++ error = device_create_file(dev, &dev_attr_dump_reg);
++ #endif
++
++ #ifdef __IS_DUAL__
++ error = ifx_proc_addproc("dump_spram_1", procfs_dump_spram_show_1, NULL);
++ error = ifx_proc_addproc("dump_spram_2", procfs_dump_spram_show_2, NULL);
++ error = device_create_file(dev, &dev_attr_dump_spram_1);
++ error = device_create_file(dev, &dev_attr_dump_spram_2);
++ #else
++ error = ifx_proc_addproc("dump_spram", procfs_dump_spram_show, NULL);
++ error = device_create_file(dev, &dev_attr_dump_spram);
++ #endif
++
++ #ifdef __IS_HOST__
++ #ifdef __IS_DUAL__
++ error = ifx_proc_addproc("dump_host_state_1", procfs_dump_host_state_show_1, NULL);
++ error = ifx_proc_addproc("dump_host_state_2", procfs_dump_host_state_show_2, NULL);
++ error = device_create_file(dev, &dev_attr_dump_host_state_1);
++ error = device_create_file(dev, &dev_attr_dump_host_state_2);
++ #else
++ error = ifx_proc_addproc("dump_host_state", procfs_dump_host_state_show, NULL);
++ error = device_create_file(dev, &dev_attr_dump_host_state);
++ #endif
++ #endif
++ #endif //__ENABLE_DUMP__
++ //////////////////////////////////////////////////////
++}
++
++
++/*!
++ \brief This function remove the sysfs and procfs entries
++ \param[in] _dev Pointer of device structure, if applied
++ */
++void ifxusb_attr_remove (void *_dev)
++{
++ struct device *dev = (struct device *) _dev;
++
++ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++ ifx_proc_delproc("dbglevel");
++ device_remove_file(dev, &dev_attr_dbglevel);
++
++ #ifdef __IS_DUAL__
++ ifx_proc_delproc("dump_params_1");
++ ifx_proc_delproc("dump_params_2");
++ device_remove_file(dev, &dev_attr_dump_params_1);
++ device_remove_file(dev, &dev_attr_dump_params_2);
++ #else
++ ifx_proc_delproc("dump_params");
++ device_remove_file(dev, &dev_attr_dump_params);
++ #endif
++
++ #ifdef __IS_DUAL__
++ ifx_proc_delproc("mode_1");
++ ifx_proc_delproc("mode_2");
++ device_remove_file(dev, &dev_attr_mode_1);
++ device_remove_file(dev, &dev_attr_mode_2);
++ #else
++ ifx_proc_delproc("mode");
++ device_remove_file(dev, &dev_attr_mode);
++ #endif
++
++ #ifdef __IS_HOST__
++ #ifdef __IS_DUAL__
++ ifx_proc_delproc("buspower_1");
++ ifx_proc_delproc("buspower_2");
++ device_remove_file(dev, &dev_attr_buspower_1);
++ device_remove_file(dev, &dev_attr_buspower_2);
++ #else
++ ifx_proc_delproc("buspower");
++ device_remove_file(dev, &dev_attr_buspower);
++ #endif
++
++ #ifdef __IS_DUAL__
++ ifx_proc_delproc("bussuspend_1");
++ ifx_proc_delproc("bussuspend_2");
++ device_remove_file(dev, &dev_attr_bussuspend_1);
++ device_remove_file(dev, &dev_attr_bussuspend_2);
++ #else
++ ifx_proc_delproc("bussuspend");
++ device_remove_file(dev, &dev_attr_bussuspend);
++ #endif
++
++ #ifdef __IS_DUAL__
++ ifx_proc_delproc("busconnected_1");
++ ifx_proc_delproc("busconnected_2");
++ device_remove_file(dev, &dev_attr_busconnected_1);
++ device_remove_file(dev, &dev_attr_busconnected_2);
++ #else
++ ifx_proc_delproc("busconnected");
++ device_remove_file(dev, &dev_attr_busconnected);
++ #endif
++
++ #ifdef __IS_DUAL__
++ ifx_proc_delproc("connectspeed_1");
++ ifx_proc_delproc("connectspeed_2");
++ device_remove_file(dev, &dev_attr_connectspeed_1);
++ device_remove_file(dev, &dev_attr_connectspeed_2);
++ #else
++ ifx_proc_delproc("connectspeed");
++ device_remove_file(dev, &dev_attr_connectspeed);
++ #endif
++ #endif
++
++ #ifdef __IS_DEVICE__
++ ifx_proc_delproc("devspeed");
++ device_remove_file(dev, &dev_attr_devspeed);
++ ifx_proc_delproc("enumspeed");
++ device_remove_file(dev, &dev_attr_enumspeed);
++ #endif
++
++ #ifdef __ENABLE_DUMP__
++ #ifdef __IS_DUAL__
++ ifx_proc_delproc("dump_reg_1");
++ ifx_proc_delproc("dump_reg_2");
++ device_remove_file(dev, &dev_attr_dump_reg_1);
++ device_remove_file(dev, &dev_attr_dump_reg_2);
++ #else
++ ifx_proc_delproc("dump_reg");
++ device_remove_file(dev, &dev_attr_dump_reg);
++ #endif
++
++ #ifdef __IS_DUAL__
++ ifx_proc_delproc("dump_spram_1");
++ ifx_proc_delproc("dump_spram_2");
++ device_remove_file(dev, &dev_attr_dump_spram_1);
++ device_remove_file(dev, &dev_attr_dump_spram_2);
++ #else
++ ifx_proc_delproc("dump_spram");
++ device_remove_file(dev, &dev_attr_dump_spram);
++ #endif
++
++ #ifdef __IS_HOST__
++ #ifdef __IS_DUAL__
++ ifx_proc_delproc("dump_host_state_1");
++ ifx_proc_delproc("dump_host_state_2");
++ device_remove_file(dev, &dev_attr_dump_host_state_1);
++ device_remove_file(dev, &dev_attr_dump_host_state_2);
++ #else
++ ifx_proc_delproc("dump_host_state");
++ device_remove_file(dev, &dev_attr_dump_host_state);
++ #endif
++ #endif
++ #endif //__ENABLE_DUMP__
++ /* AVM/WK fix: del IFXUSB root dir*/
++ ifx_proc_delproc(NULL);
++}
++
++static struct proc_dir_entry * proc_ifx_root = NULL;
++
++/* initialize the proc file system and make a dir named /proc/[name] */
++static void ifx_proc_init(void)
++{
++ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++ proc_ifx_root = proc_mkdir(ifxusb_driver_name, (void *)0);
++ if (!proc_ifx_root){
++ IFX_PRINT("%s proc initialization failed! \n", ifxusb_driver_name);
++ return;
++ }
++}
++
++/* proc file system add function for debugging. */
++static int ifx_proc_addproc(char *funcname, read_proc_t *hookfuncr, write_proc_t *hookfuncw)
++{
++ struct proc_dir_entry *pe;
++ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++ if (!proc_ifx_root)
++ ifx_proc_init();
++
++ if (hookfuncw == NULL)
++ {
++ pe = create_proc_read_entry(funcname, S_IRUGO, proc_ifx_root, hookfuncr, NULL);
++ if (!pe)
++ {
++ IFX_PRINT("ERROR in creating read proc entry (%s)! \n", funcname);
++ return -1;
++ }
++ }
++ else
++ {
++ pe = create_proc_entry(funcname, S_IRUGO | S_IWUGO, proc_ifx_root);
++ if (pe)
++ {
++ pe->read_proc = hookfuncr;
++ pe->write_proc = hookfuncw;
++ }
++ else
++ {
++ IFX_PRINT("ERROR in creating proc entry (%s)! \n", funcname);
++ return -1;
++ }
++ }
++ return 0;
++}
++
++
++/* proc file system del function for removing module. */
++static void ifx_proc_delproc(char *funcname)
++{
++/* AVM/WK Fix*/
++ if (funcname != NULL) {
++ remove_proc_entry(funcname, proc_ifx_root);
++ } else {
++ remove_proc_entry(ifxusb_driver_name, NULL);
++ proc_ifx_root = NULL;
++ }
++}
++
++static void ifxusb_dump_params(ifxusb_core_if_t *_core_if)
++{
++ ifxusb_params_t *params=&_core_if->params;
++
++ #ifdef __IS_HOST__
++ IFX_PRINT("IFXUSB Dump Parameters ( Host Mode) \n");
++ #endif //__IS_HOST__
++ #ifdef __IS_DEVICE__
++ IFX_PRINT("IFXUSB Dump Parameters ( Device Mode) \n");
++ #endif //__IS_DEVICE__
++
++ #ifdef __DESC_DMA__
++ IFX_PRINT("DMA: Hermes DMA\n");
++ #else
++ IFX_PRINT("DMA: Non-Desc DMA\n");
++ #endif
++ IFX_PRINT(" Burst size: %d\n",params->dma_burst_size);
++
++ if (params->speed==1)
++ IFX_PRINT("Full Speed only\n");
++ else if(params->speed==0)
++ IFX_PRINT("Full/Hign Speed\n");
++ else
++ IFX_PRINT("Unkonwn setting (%d) for Speed\n",params->speed);
++
++ IFX_PRINT("Total Data FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",
++ params->data_fifo_size,params->data_fifo_size,
++ params->data_fifo_size*4, params->data_fifo_size*4
++ );
++
++ #ifdef __IS_DEVICE__
++ IFX_PRINT("Rx FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",
++ params->rx_fifo_size,params->rx_fifo_size,
++ params->rx_fifo_size*4, params->rx_fifo_size*4
++ );
++ {
++ int i;
++ for(i=0;i<MAX_EPS_CHANNELS;i++)
++ {
++ IFX_PRINT("Tx FIFO #%d size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",i,
++ params->tx_fifo_size[i],params->tx_fifo_size[i],
++ params->tx_fifo_size[i]*4, params->tx_fifo_size[i]*4
++ );
++ }
++ }
++ #ifdef __DED_FIFO__
++ IFX_PRINT("Treshold : %s Rx:%d Tx:%d \n",
++ (params->thr_ctl)?"On":"Off",params->tx_thr_length,params->rx_thr_length);
++ #endif
++ #else //__IS_HOST__
++ IFX_PRINT("Host Channels: %d\n",params->host_channels);
++
++ IFX_PRINT("Rx FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",
++ params->data_fifo_size,params->data_fifo_size,
++ params->data_fifo_size*4, params->data_fifo_size*4
++ );
++
++ IFX_PRINT("NP Tx FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",
++ params->nperio_tx_fifo_size,params->nperio_tx_fifo_size,
++ params->nperio_tx_fifo_size*4, params->nperio_tx_fifo_size*4
++ );
++
++ IFX_PRINT(" P Tx FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",
++ params->perio_tx_fifo_size,params->perio_tx_fifo_size,
++ params->perio_tx_fifo_size*4, params->perio_tx_fifo_size*4
++ );
++ #endif //__IS_HOST__
++
++ IFX_PRINT("Max Transfer size: %d(0x%06X) Bytes\n",
++ params->max_transfer_size,params->max_transfer_size
++ );
++ IFX_PRINT("Max Packet Count: %d(0x%06X)\n",
++ params->max_packet_count,params->max_packet_count
++ );
++
++ IFX_PRINT("PHY UTMI Width: %d\n",params->phy_utmi_width);
++
++ IFX_PRINT("Turn Around Time: HS:%d FS:%d\n",params->turn_around_time_hs,params->turn_around_time_fs);
++ IFX_PRINT("Timeout Calibration: HS:%d FS:%d\n",params->timeout_cal_hs,params->timeout_cal_fs);
++
++
++ IFX_PRINT("==================================================\n");
++ IFX_PRINT("End of Parameters Dump\n");
++ IFX_PRINT("==================================================\n");
++}
++
++
+diff --git a/drivers/usb/ifxhcd/ifxusb_driver.c b/drivers/usb/ifxhcd/ifxusb_driver.c
+new file mode 100644
+index 0000000..2334905
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxusb_driver.c
+@@ -0,0 +1,970 @@
++/*****************************************************************************
++ ** FILE NAME : ifxusb_driver.c
++ ** PROJECT : IFX USB sub-system V3
++ ** MODULES : IFX USB sub-system Host and Device driver
++ ** SRC VERSION : 1.0
++ ** DATE : 1/Jan/2009
++ ** AUTHOR : Chen, Howard
++ ** DESCRIPTION : The provides the initialization and cleanup entry
++ ** points for the IFX USB driver. This module can be
++ ** dynamically loaded with insmod command or built-in
++ ** with kernel. When loaded or executed the ifxusb_driver_init
++ ** function is called. When the module is removed (using rmmod),
++ ** the ifxusb_driver_cleanup function is called.
++ *****************************************************************************/
++
++/*!
++ \file ifxusb_driver.c
++ \brief This file contains the loading/unloading interface to the Linux driver.
++*/
++
++#include <linux/version.h>
++#include "ifxusb_version.h"
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++
++#include <linux/device.h>
++#include <linux/platform_device.h>
++
++#include <linux/errno.h>
++#include <linux/types.h>
++#include <linux/stat.h> /* permission constants */
++#include <linux/gpio.h>
++#include <lantiq_soc.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++ #include <linux/irq.h>
++#endif
++
++#include <asm/io.h>
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++ #include <asm/irq.h>
++#endif
++
++#include "ifxusb_plat.h"
++
++#include "ifxusb_cif.h"
++
++#ifdef __IS_HOST__
++ #include "ifxhcd.h"
++
++ #define USB_DRIVER_DESC "IFX USB HCD driver"
++ const char ifxusb_driver_name[] = "ifxusb_hcd";
++
++ #ifdef __IS_DUAL__
++ ifxhcd_hcd_t ifxusb_hcd_1;
++ ifxhcd_hcd_t ifxusb_hcd_2;
++ const char ifxusb_hcd_name_1[] = "ifxusb_hcd_1";
++ const char ifxusb_hcd_name_2[] = "ifxusb_hcd_2";
++ #else
++ ifxhcd_hcd_t ifxusb_hcd;
++ const char ifxusb_hcd_name[] = "ifxusb_hcd";
++ #endif
++
++ #if defined(__DO_OC_INT__)
++ static unsigned int oc_int_installed=0;
++ static ifxhcd_hcd_t *oc_int_id=NULL;
++ #endif
++#endif
++
++#ifdef __IS_DEVICE__
++ #include "ifxpcd.h"
++
++ #define USB_DRIVER_DESC "IFX USB PCD driver"
++ const char ifxusb_driver_name[] = "ifxusb_pcd";
++
++ ifxpcd_pcd_t ifxusb_pcd;
++ const char ifxusb_pcd_name[] = "ifxusb_pcd";
++#endif
++
++/* Global Debug Level Mask. */
++#ifdef __IS_HOST__
++ uint32_t h_dbg_lvl = 0x00;
++#endif
++
++#ifdef __IS_DEVICE__
++ uint32_t d_dbg_lvl = 0x00;
++#endif
++
++ifxusb_params_t ifxusb_module_params;
++
++static void parse_parms(void);
++
++
++#include <lantiq_irq.h>
++#define IFX_USB0_IR (INT_NUM_IM1_IRL0 + 22)
++#define IFX_USB1_IR (INT_NUM_IM2_IRL0 + 19)
++
++/*!
++ \brief This function is called when a driver is unregistered. This happens when
++ the rmmod command is executed. The device may or may not be electrically
++ present. If it is present, the driver stops device processing. Any resources
++ used on behalf of this device are freed.
++*/
++static int ifxusb_driver_remove(struct platform_device *_dev)
++{
++ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++ #ifdef __IS_HOST__
++ #if defined(__DO_OC_INT__)
++ #if defined(__DO_OC_INT_ENABLE__)
++ ifxusb_oc_int_off();
++ #endif
++
++ if(oc_int_installed && oc_int_id)
++ free_irq((unsigned int)IFXUSB_OC_IRQ, oc_int_id );
++ oc_int_installed=0;
++ oc_int_id=NULL;
++ #endif
++
++ #if defined(__IS_DUAL__)
++ ifxhcd_remove(&ifxusb_hcd_1);
++ ifxusb_core_if_remove(&ifxusb_hcd_1.core_if );
++ ifxhcd_remove(&ifxusb_hcd_2);
++ ifxusb_core_if_remove(&ifxusb_hcd_2.core_if );
++ #else
++ ifxhcd_remove(&ifxusb_hcd);
++ ifxusb_core_if_remove(&ifxusb_hcd.core_if );
++ #endif
++ #endif
++
++ #ifdef __IS_DEVICE__
++ ifxpcd_remove();
++ ifxusb_core_if_remove(&ifxusb_pcd.core_if );
++ #endif
++
++ /* Remove the device attributes */
++
++ ifxusb_attr_remove(&_dev->dev);
++
++ return 0;
++}
++
++
++/* Function to setup the structures to control one usb core running as host*/
++#ifdef __IS_HOST__
++/*!
++ \brief inlined by ifxusb_driver_probe(), handling host mode probing. Run at each host core.
++*/
++ static inline int ifxusb_driver_probe_h(ifxhcd_hcd_t *_hcd,
++ int _irq,
++ uint32_t _iobase,
++ uint32_t _fifomem,
++ uint32_t _fifodbg
++ )
++ {
++ int retval = 0;
++
++ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++
++#ifdef __DEV_NEW__
++ ifxusb_power_off (&_hcd->core_if);
++ ifxusb_phy_power_off (&_hcd->core_if); // Test
++ mdelay(500);
++#endif //__DEV_NEW__
++ ifxusb_power_on (&_hcd->core_if);
++ mdelay(50);
++ ifxusb_phy_power_on (&_hcd->core_if); // Test
++ mdelay(50);
++ ifxusb_hard_reset(&_hcd->core_if);
++ retval =ifxusb_core_if_init(&_hcd->core_if,
++ _irq,
++ _iobase,
++ _fifomem,
++ _fifodbg);
++ if(retval)
++ return retval;
++
++ ifxusb_host_core_init(&_hcd->core_if,&ifxusb_module_params);
++
++ ifxusb_disable_global_interrupts( &_hcd->core_if);
++
++ /* The driver is now initialized and need to be registered into Linux USB sub-system */
++
++ retval = ifxhcd_init(_hcd); // hook the hcd into usb ss
++
++ if (retval != 0)
++ {
++ IFX_ERROR("_hcd_init failed\n");
++ return retval;
++ }
++
++ //ifxusb_enable_global_interrupts( _hcd->core_if ); // this should be done at hcd_start , including hcd_interrupt
++ return 0;
++ }
++#endif //__IS_HOST__
++
++#ifdef __IS_DEVICE__
++/*!
++ \brief inlined by ifxusb_driver_probe(), handling device mode probing.
++*/
++ static inline int ifxusb_driver_probe_d(ifxpcd_pcd_t *_pcd,
++ int _irq,
++ uint32_t _iobase,
++ uint32_t _fifomem,
++ uint32_t _fifodbg
++ )
++ {
++ int retval = 0;
++
++ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++#ifdef __DEV_NEW__
++ ifxusb_power_off (&_pcd->core_if);
++ ifxusb_phy_power_off (&_pcd->core_if); // Test
++ mdelay(500);
++#endif // __DEV_NEW__
++ ifxusb_power_on (&_pcd->core_if);
++ mdelay(50);
++ ifxusb_phy_power_on (&_pcd->core_if); // Test
++ mdelay(50);
++ ifxusb_hard_reset(&_pcd->core_if);
++ retval =ifxusb_core_if_init(&_pcd->core_if,
++ _irq,
++ _iobase,
++ _fifomem,
++ _fifodbg);
++ if(retval)
++ return retval;
++
++ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++ ifxusb_dev_core_init(&_pcd->core_if,&ifxusb_module_params);
++
++ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++ ifxusb_disable_global_interrupts( &_pcd->core_if);
++
++ /* The driver is now initialized and need to be registered into
++ Linux USB Gadget sub-system
++ */
++ retval = ifxpcd_init();
++ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++
++ if (retval != 0)
++ {
++ IFX_ERROR("_pcd_init failed\n");
++ return retval;
++ }
++ //ifxusb_enable_global_interrupts( _pcd->core_if ); // this should be done at gadget bind or start
++ return 0;
++ }
++#endif //__IS_DEVICE__
++
++
++
++/*!
++ \brief This function is called by module management in 2.6 kernel or by ifxusb_driver_init with 2.4 kernel
++ It is to probe and setup IFXUSB core(s).
++*/
++static int ifxusb_driver_probe(struct platform_device *_dev)
++{
++ int retval = 0;
++ int *pins = _dev->dev.platform_data;
++ if (ltq_is_vr9()) {
++ gpio_request(6, "id1");
++ gpio_request(9, "id2");
++ gpio_direction_input(6);
++ gpio_direction_input(9);
++ }
++ if (pins) {
++ if (pins[0]) {
++ gpio_request(pins[0], "vbus1");
++ gpio_direction_output(pins[0], 1);
++ }
++ if (pins[1] && ltq_is_vr9()) {
++ gpio_request(pins[1], "vbus2");
++ gpio_direction_output(pins[1], 1);
++ }
++ }
++ // Parsing and store the parameters
++ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++ parse_parms();
++
++ #ifdef __IS_HOST__
++ #if defined(__IS_DUAL__)
++ memset(&ifxusb_hcd_1, 0, sizeof(ifxhcd_hcd_t));
++ memset(&ifxusb_hcd_2, 0, sizeof(ifxhcd_hcd_t));
++
++ ifxusb_hcd_1.core_if.core_no=0;
++ ifxusb_hcd_2.core_if.core_no=1;
++ ifxusb_hcd_1.core_if.core_name=(char *)ifxusb_hcd_name_1;
++ ifxusb_hcd_2.core_if.core_name=(char *)ifxusb_hcd_name_2;
++
++ ifxusb_hcd_1.dev=&_dev->dev;
++ ifxusb_hcd_2.dev=&_dev->dev;
++
++ retval = ifxusb_driver_probe_h(&ifxusb_hcd_1,
++ IFX_USB0_IR,
++ IFXUSB1_IOMEM_BASE,
++ IFXUSB1_FIFOMEM_BASE,
++ IFXUSB1_FIFODBG_BASE
++ );
++ if(retval)
++ goto ifxusb_driver_probe_fail;
++
++ retval = ifxusb_driver_probe_h(&ifxusb_hcd_2,
++ IFX_USB1_IR,
++ IFXUSB2_IOMEM_BASE,
++ IFXUSB2_FIFOMEM_BASE,
++ IFXUSB2_FIFODBG_BASE
++ );
++ if(retval)
++ goto ifxusb_driver_probe_fail;
++
++ #elif defined(__IS_FIRST__)
++ memset(&ifxusb_hcd, 0, sizeof(ifxhcd_hcd_t));
++
++ ifxusb_hcd.core_if.core_no=0;
++ ifxusb_hcd.core_if.core_name=(char *)ifxusb_hcd_name;
++
++ ifxusb_hcd.dev=&_dev->dev;
++
++ retval = ifxusb_driver_probe_h(&ifxusb_hcd,
++ IFX_USB0_IR,
++ IFXUSB1_IOMEM_BASE,
++ IFXUSB1_FIFOMEM_BASE,
++ IFXUSB1_FIFODBG_BASE
++ );
++ if(retval)
++ goto ifxusb_driver_probe_fail;
++
++ #elif defined(__IS_SECOND__)
++ memset(&ifxusb_hcd, 0, sizeof(ifxhcd_hcd_t));
++
++ ifxusb_hcd.core_if.core_no=1;
++ ifxusb_hcd.core_if.core_name=(char *)ifxusb_hcd_name;
++
++ ifxusb_hcd.dev=&_dev->dev;
++
++ retval = ifxusb_driver_probe_h(&ifxusb_hcd,
++ IFX_USB1_IR,
++ IFXUSB2_IOMEM_BASE,
++ IFXUSB2_FIFOMEM_BASE,
++ IFXUSB2_FIFODBG_BASE
++ );
++ if(retval)
++ goto ifxusb_driver_probe_fail;
++
++ #else
++ memset(&ifxusb_hcd, 0, sizeof(ifxhcd_hcd_t));
++
++ ifxusb_hcd.core_if.core_no=0;
++ ifxusb_hcd.core_if.core_name=(char *)ifxusb_hcd_name;
++
++ ifxusb_hcd.dev=&_dev->dev;
++
++ retval = ifxusb_driver_probe_h(&ifxusb_hcd,
++ IFXUSB_IRQ,
++ IFXUSB_IOMEM_BASE,
++ IFXUSB_FIFOMEM_BASE,
++ IFXUSB_FIFODBG_BASE
++ );
++ if(retval)
++ goto ifxusb_driver_probe_fail;
++ #endif
++
++ #if defined(__DO_OC_INT__)
++ IFXUSB_DEBUGPL( DBG_CIL, "registering (overcurrent) handler for irq%d\n", IFXUSB_OC_IRQ);
++ #if defined(__IS_DUAL__)
++ request_irq((unsigned int)IFXUSB_OC_IRQ, &ifx_hcd_oc_irq,
++// SA_INTERRUPT|SA_SHIRQ, "ifxusb_oc", (void *)&ifxusb_hcd_1);
++ IRQF_DISABLED | IRQF_SHARED, "ifxusb_oc", (void *)&ifxusb_hcd_1);
++ oc_int_id=&ifxusb_hcd_1;
++ #else
++ request_irq((unsigned int)IFXUSB_OC_IRQ, &ifx_hcd_oc_irq,
++// SA_INTERRUPT|SA_SHIRQ, "ifxusb_oc", (void *)&ifxusb_hcd);
++ IRQF_DISABLED | IRQF_SHARED, "ifxusb_oc", (void *)&ifxusb_hcd);
++ oc_int_id=&ifxusb_hcd;
++ #endif
++ oc_int_installed=1;
++
++ #if defined(__DO_OC_INT_ENABLE__)
++ ifxusb_oc_int_on();
++ #endif
++ #endif
++
++ #endif
++
++ #ifdef __IS_DEVICE__
++ memset(&ifxusb_pcd, 0, sizeof(ifxpcd_pcd_t));
++ ifxusb_pcd.core_if.core_name=(char *)&ifxusb_pcd_name[0];
++
++ ifxusb_pcd.dev=&_dev->dev;
++
++ #if defined(__IS_FIRST__)
++ ifxusb_pcd.core_if.core_no=0;
++ retval = ifxusb_driver_probe_d(&ifxusb_pcd,
++ IFXUSB1_IRQ,
++ IFXUSB1_IOMEM_BASE,
++ IFXUSB1_FIFOMEM_BASE,
++ IFXUSB1_FIFODBG_BASE
++ );
++ #elif defined(__IS_SECOND__)
++ ifxusb_pcd.core_if.core_no=1;
++ retval = ifxusb_driver_probe_d(&ifxusb_pcd,
++ IFXUSB2_IRQ,
++ IFXUSB2_IOMEM_BASE,
++ IFXUSB2_FIFOMEM_BASE,
++ IFXUSB2_FIFODBG_BASE
++ );
++ #else
++ ifxusb_pcd.core_if.core_no=0;
++ retval = ifxusb_driver_probe_d(&ifxusb_pcd,
++ IFXUSB_IRQ,
++ IFXUSB_IOMEM_BASE,
++ IFXUSB_FIFOMEM_BASE,
++ IFXUSB_FIFODBG_BASE
++ );
++ #endif
++ if(retval)
++ goto ifxusb_driver_probe_fail;
++ #endif
++
++ ifxusb_attr_create(&_dev->dev);
++
++ return 0;
++
++ifxusb_driver_probe_fail:
++ ifxusb_driver_remove(_dev);
++ return retval;
++}
++
++
++
++/*!
++ \brief This function is called when the ifxusb_driver is installed with the insmod command.
++*/
++
++
++static struct platform_driver ifxusb_driver = {
++ .driver = {
++ .name = ifxusb_driver_name,
++ .owner = THIS_MODULE,
++ },
++ .probe = ifxusb_driver_probe,
++ .remove = ifxusb_driver_remove,
++};
++
++int __init ifxusb_driver_init(void)
++{
++ int retval = 0;
++
++ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++ IFX_PRINT("%s: version %s\n", ifxusb_driver_name, IFXUSB_VERSION);
++
++ retval = platform_driver_register(&ifxusb_driver);
++
++ if (retval < 0) {
++ IFX_ERROR("%s retval=%d\n", __func__, retval);
++ return retval;
++ }
++ return retval;
++}
++
++#if 0 // 2.4
++ int __init ifxusb_driver_init(void)
++ {
++ int retval = 0;
++ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++ IFX_PRINT("%s: version %s\n", ifxusb_driver_name, IFXUSB_VERSION);
++ retval = ifxusb_driver_probe();
++
++ if (retval < 0) {
++ IFX_ERROR("%s retval=%d\n", __func__, retval);
++ return retval;
++ }
++
++ return retval;
++ }
++#endif
++
++module_init(ifxusb_driver_init);
++
++
++/*!
++ \brief This function is called when the driver is removed from the kernel
++ with the rmmod command. The driver unregisters itself with its bus
++ driver.
++*/
++
++void __exit ifxusb_driver_cleanup(void)
++{
++ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++
++ platform_driver_unregister(&ifxusb_driver);
++
++ IFX_PRINT("%s module removed\n", ifxusb_driver_name);
++}
++#if 0
++ void __exit ifxusb_driver_cleanup(void)
++ {
++ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++ ifxusb_driver_remove();
++ IFX_PRINT("%s module removed\n", ifxusb_driver_name);
++ }
++#endif
++module_exit(ifxusb_driver_cleanup);
++
++
++
++MODULE_DESCRIPTION(USB_DRIVER_DESC);
++MODULE_AUTHOR("Infineon");
++MODULE_LICENSE("GPL");
++
++
++
++// Parameters set when loaded
++//static long dbg_lvl =0xFFFFFFFF;
++static long dbg_lvl =0;
++static short dma_burst_size =-1;
++static short speed =-1;
++static long data_fifo_size =-1;
++#ifdef __IS_DEVICE__
++ static long rx_fifo_size =-1;
++ #ifdef __DED_FIFO__
++ static long tx_fifo_size_00 =-1;
++ static long tx_fifo_size_01 =-1;
++ static long tx_fifo_size_02 =-1;
++ static long tx_fifo_size_03 =-1;
++ static long tx_fifo_size_04 =-1;
++ static long tx_fifo_size_05 =-1;
++ static long tx_fifo_size_06 =-1;
++ static long tx_fifo_size_07 =-1;
++ static long tx_fifo_size_08 =-1;
++ static long tx_fifo_size_09 =-1;
++ static long tx_fifo_size_10 =-1;
++ static long tx_fifo_size_11 =-1;
++ static long tx_fifo_size_12 =-1;
++ static long tx_fifo_size_13 =-1;
++ static long tx_fifo_size_14 =-1;
++ static long tx_fifo_size_15 =-1;
++ static short thr_ctl=-1;
++ static long tx_thr_length =-1;
++ static long rx_thr_length =-1;
++ #else
++ static long nperio_tx_fifo_size =-1;
++ static long perio_tx_fifo_size_01 =-1;
++ static long perio_tx_fifo_size_02 =-1;
++ static long perio_tx_fifo_size_03 =-1;
++ static long perio_tx_fifo_size_04 =-1;
++ static long perio_tx_fifo_size_05 =-1;
++ static long perio_tx_fifo_size_06 =-1;
++ static long perio_tx_fifo_size_07 =-1;
++ static long perio_tx_fifo_size_08 =-1;
++ static long perio_tx_fifo_size_09 =-1;
++ static long perio_tx_fifo_size_10 =-1;
++ static long perio_tx_fifo_size_11 =-1;
++ static long perio_tx_fifo_size_12 =-1;
++ static long perio_tx_fifo_size_13 =-1;
++ static long perio_tx_fifo_size_14 =-1;
++ static long perio_tx_fifo_size_15 =-1;
++ #endif
++ static short dev_endpoints =-1;
++#endif
++
++#ifdef __IS_HOST__
++ static long rx_fifo_size =-1;
++ static long nperio_tx_fifo_size =-1;
++ static long perio_tx_fifo_size =-1;
++ static short host_channels =-1;
++#endif
++
++static long max_transfer_size =-1;
++static long max_packet_count =-1;
++static long phy_utmi_width =-1;
++static long turn_around_time_hs =-1;
++static long turn_around_time_fs =-1;
++static long timeout_cal_hs =-1;
++static long timeout_cal_fs =-1;
++
++/*!
++ \brief Parsing the parameters taken when module load
++*/
++static void parse_parms(void)
++{
++
++ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
++ #ifdef __IS_HOST__
++ h_dbg_lvl=dbg_lvl;
++ #endif
++ #ifdef __IS_DEVICE__
++ d_dbg_lvl=dbg_lvl;
++ #endif
++
++ switch(dma_burst_size)
++ {
++ case 0:
++ case 1:
++ case 4:
++ case 8:
++ case 16:
++ ifxusb_module_params.dma_burst_size=dma_burst_size;
++ break;
++ default:
++ ifxusb_module_params.dma_burst_size=default_param_dma_burst_size;
++ }
++
++ if(speed==0 || speed==1)
++ ifxusb_module_params.speed=speed;
++ else
++ ifxusb_module_params.speed=default_param_speed;
++
++ if(max_transfer_size>=2048 && max_transfer_size<=65535)
++ ifxusb_module_params.max_transfer_size=max_transfer_size;
++ else
++ ifxusb_module_params.max_transfer_size=default_param_max_transfer_size;
++
++ if(max_packet_count>=15 && max_packet_count<=511)
++ ifxusb_module_params.max_packet_count=max_packet_count;
++ else
++ ifxusb_module_params.max_packet_count=default_param_max_packet_count;
++
++ switch(phy_utmi_width)
++ {
++ case 8:
++ case 16:
++ ifxusb_module_params.phy_utmi_width=phy_utmi_width;
++ break;
++ default:
++ ifxusb_module_params.phy_utmi_width=default_param_phy_utmi_width;
++ }
++
++ if(turn_around_time_hs>=0 && turn_around_time_hs<=7)
++ ifxusb_module_params.turn_around_time_hs=turn_around_time_hs;
++ else
++ ifxusb_module_params.turn_around_time_hs=default_param_turn_around_time_hs;
++
++ if(turn_around_time_fs>=0 && turn_around_time_fs<=7)
++ ifxusb_module_params.turn_around_time_fs=turn_around_time_fs;
++ else
++ ifxusb_module_params.turn_around_time_fs=default_param_turn_around_time_fs;
++
++ if(timeout_cal_hs>=0 && timeout_cal_hs<=7)
++ ifxusb_module_params.timeout_cal_hs=timeout_cal_hs;
++ else
++ ifxusb_module_params.timeout_cal_hs=default_param_timeout_cal_hs;
++
++ if(timeout_cal_fs>=0 && timeout_cal_fs<=7)
++ ifxusb_module_params.timeout_cal_fs=timeout_cal_fs;
++ else
++ ifxusb_module_params.timeout_cal_fs=default_param_timeout_cal_fs;
++
++ if(data_fifo_size>=32 && data_fifo_size<=32768)
++ ifxusb_module_params.data_fifo_size=data_fifo_size;
++ else
++ ifxusb_module_params.data_fifo_size=default_param_data_fifo_size;
++
++ #ifdef __IS_HOST__
++ if(host_channels>=1 && host_channels<=16)
++ ifxusb_module_params.host_channels=host_channels;
++ else
++ ifxusb_module_params.host_channels=default_param_host_channels;
++
++ if(rx_fifo_size>=16 && rx_fifo_size<=32768)
++ ifxusb_module_params.rx_fifo_size=rx_fifo_size;
++ else
++ ifxusb_module_params.rx_fifo_size=default_param_rx_fifo_size;
++
++ if(nperio_tx_fifo_size>=16 && nperio_tx_fifo_size<=32768)
++ ifxusb_module_params.nperio_tx_fifo_size=nperio_tx_fifo_size;
++ else
++ ifxusb_module_params.nperio_tx_fifo_size=default_param_nperio_tx_fifo_size;
++
++ if(perio_tx_fifo_size>=16 && perio_tx_fifo_size<=32768)
++ ifxusb_module_params.perio_tx_fifo_size=perio_tx_fifo_size;
++ else
++ ifxusb_module_params.perio_tx_fifo_size=default_param_perio_tx_fifo_size;
++ #endif //__IS_HOST__
++
++ #ifdef __IS_DEVICE__
++ if(rx_fifo_size>=16 && rx_fifo_size<=32768)
++ ifxusb_module_params.rx_fifo_size=rx_fifo_size;
++ else
++ ifxusb_module_params.rx_fifo_size=default_param_rx_fifo_size;
++ #ifdef __DED_FIFO__
++ if(tx_fifo_size_00>=16 && tx_fifo_size_00<=32768)
++ ifxusb_module_params.tx_fifo_size[ 0]=tx_fifo_size_00;
++ else
++ ifxusb_module_params.tx_fifo_size[ 0]=default_param_tx_fifo_size_00;
++ if(tx_fifo_size_01>=0 && tx_fifo_size_01<=32768)
++ ifxusb_module_params.tx_fifo_size[ 1]=tx_fifo_size_01;
++ else
++ ifxusb_module_params.tx_fifo_size[ 1]=default_param_tx_fifo_size_01;
++ if(tx_fifo_size_02>=0 && tx_fifo_size_02<=32768)
++ ifxusb_module_params.tx_fifo_size[ 2]=tx_fifo_size_02;
++ else
++ ifxusb_module_params.tx_fifo_size[ 2]=default_param_tx_fifo_size_02;
++ if(tx_fifo_size_03>=0 && tx_fifo_size_03<=32768)
++ ifxusb_module_params.tx_fifo_size[ 3]=tx_fifo_size_03;
++ else
++ ifxusb_module_params.tx_fifo_size[ 3]=default_param_tx_fifo_size_03;
++ if(tx_fifo_size_04>=0 && tx_fifo_size_04<=32768)
++ ifxusb_module_params.tx_fifo_size[ 4]=tx_fifo_size_04;
++ else
++ ifxusb_module_params.tx_fifo_size[ 4]=default_param_tx_fifo_size_04;
++ if(tx_fifo_size_05>=0 && tx_fifo_size_05<=32768)
++ ifxusb_module_params.tx_fifo_size[ 5]=tx_fifo_size_05;
++ else
++ ifxusb_module_params.tx_fifo_size[ 5]=default_param_tx_fifo_size_05;
++ if(tx_fifo_size_06>=0 && tx_fifo_size_06<=32768)
++ ifxusb_module_params.tx_fifo_size[ 6]=tx_fifo_size_06;
++ else
++ ifxusb_module_params.tx_fifo_size[ 6]=default_param_tx_fifo_size_06;
++ if(tx_fifo_size_07>=0 && tx_fifo_size_07<=32768)
++ ifxusb_module_params.tx_fifo_size[ 7]=tx_fifo_size_07;
++ else
++ ifxusb_module_params.tx_fifo_size[ 7]=default_param_tx_fifo_size_07;
++ if(tx_fifo_size_08>=0 && tx_fifo_size_08<=32768)
++ ifxusb_module_params.tx_fifo_size[ 8]=tx_fifo_size_08;
++ else
++ ifxusb_module_params.tx_fifo_size[ 8]=default_param_tx_fifo_size_08;
++ if(tx_fifo_size_09>=0 && tx_fifo_size_09<=32768)
++ ifxusb_module_params.tx_fifo_size[ 9]=tx_fifo_size_09;
++ else
++ ifxusb_module_params.tx_fifo_size[ 9]=default_param_tx_fifo_size_09;
++ if(tx_fifo_size_10>=0 && tx_fifo_size_10<=32768)
++ ifxusb_module_params.tx_fifo_size[10]=tx_fifo_size_10;
++ else
++ ifxusb_module_params.tx_fifo_size[10]=default_param_tx_fifo_size_10;
++ if(tx_fifo_size_11>=0 && tx_fifo_size_11<=32768)
++ ifxusb_module_params.tx_fifo_size[11]=tx_fifo_size_11;
++ else
++ ifxusb_module_params.tx_fifo_size[11]=default_param_tx_fifo_size_11;
++ if(tx_fifo_size_12>=0 && tx_fifo_size_12<=32768)
++ ifxusb_module_params.tx_fifo_size[12]=tx_fifo_size_12;
++ else
++ ifxusb_module_params.tx_fifo_size[12]=default_param_tx_fifo_size_12;
++ if(tx_fifo_size_13>=0 && tx_fifo_size_13<=32768)
++ ifxusb_module_params.tx_fifo_size[13]=tx_fifo_size_13;
++ else
++ ifxusb_module_params.tx_fifo_size[13]=default_param_tx_fifo_size_13;
++ if(tx_fifo_size_14>=0 && tx_fifo_size_14<=32768)
++ ifxusb_module_params.tx_fifo_size[14]=tx_fifo_size_14;
++ else
++ ifxusb_module_params.tx_fifo_size[14]=default_param_tx_fifo_size_14;
++ if(tx_fifo_size_15>=0 && tx_fifo_size_15<=32768)
++ ifxusb_module_params.tx_fifo_size[15]=tx_fifo_size_15;
++ else
++ ifxusb_module_params.tx_fifo_size[15]=default_param_tx_fifo_size_15;
++ if(thr_ctl==0 || thr_ctl==1)
++ ifxusb_module_params.thr_ctl=thr_ctl;
++ else
++ ifxusb_module_params.thr_ctl=default_param_thr_ctl;
++ if(tx_thr_length>=16 && tx_thr_length<=511)
++ ifxusb_module_params.tx_thr_length=tx_thr_length;
++ else
++ ifxusb_module_params.tx_thr_length=default_param_tx_thr_length;
++ if(rx_thr_length>=16 && rx_thr_length<=511)
++ ifxusb_module_params.rx_thr_length=rx_thr_length;
++ else
++ ifxusb_module_params.rx_thr_length=default_param_rx_thr_length;
++ #else //__DED_FIFO__
++ if(nperio_tx_fifo_size>=16 && nperio_tx_fifo_size<=32768)
++ ifxusb_module_params.tx_fifo_size[ 0]=nperio_tx_fifo_size;
++ else
++ ifxusb_module_params.tx_fifo_size[ 0]=default_param_nperio_tx_fifo_size;
++ if(perio_tx_fifo_size_01>=0 && perio_tx_fifo_size_01<=32768)
++ ifxusb_module_params.tx_fifo_size[ 1]=perio_tx_fifo_size_01;
++ else
++ ifxusb_module_params.tx_fifo_size[ 1]=default_param_perio_tx_fifo_size_01;
++ if(perio_tx_fifo_size_02>=0 && perio_tx_fifo_size_02<=32768)
++ ifxusb_module_params.tx_fifo_size[ 2]=perio_tx_fifo_size_02;
++ else
++ ifxusb_module_params.tx_fifo_size[ 2]=default_param_perio_tx_fifo_size_02;
++ if(perio_tx_fifo_size_03>=0 && perio_tx_fifo_size_03<=32768)
++ ifxusb_module_params.tx_fifo_size[ 3]=perio_tx_fifo_size_03;
++ else
++ ifxusb_module_params.tx_fifo_size[ 3]=default_param_perio_tx_fifo_size_03;
++ if(perio_tx_fifo_size_04>=0 && perio_tx_fifo_size_04<=32768)
++ ifxusb_module_params.tx_fifo_size[ 4]=perio_tx_fifo_size_04;
++ else
++ ifxusb_module_params.tx_fifo_size[ 4]=default_param_perio_tx_fifo_size_04;
++ if(perio_tx_fifo_size_05>=0 && perio_tx_fifo_size_05<=32768)
++ ifxusb_module_params.tx_fifo_size[ 5]=perio_tx_fifo_size_05;
++ else
++ ifxusb_module_params.tx_fifo_size[ 5]=default_param_perio_tx_fifo_size_05;
++ if(perio_tx_fifo_size_06>=0 && perio_tx_fifo_size_06<=32768)
++ ifxusb_module_params.tx_fifo_size[ 6]=perio_tx_fifo_size_06;
++ else
++ ifxusb_module_params.tx_fifo_size[ 6]=default_param_perio_tx_fifo_size_06;
++ if(perio_tx_fifo_size_07>=0 && perio_tx_fifo_size_07<=32768)
++ ifxusb_module_params.tx_fifo_size[ 7]=perio_tx_fifo_size_07;
++ else
++ ifxusb_module_params.tx_fifo_size[ 7]=default_param_perio_tx_fifo_size_07;
++ if(perio_tx_fifo_size_08>=0 && perio_tx_fifo_size_08<=32768)
++ ifxusb_module_params.tx_fifo_size[ 8]=perio_tx_fifo_size_08;
++ else
++ ifxusb_module_params.tx_fifo_size[ 8]=default_param_perio_tx_fifo_size_08;
++ if(perio_tx_fifo_size_09>=0 && perio_tx_fifo_size_09<=32768)
++ ifxusb_module_params.tx_fifo_size[ 9]=perio_tx_fifo_size_09;
++ else
++ ifxusb_module_params.tx_fifo_size[ 9]=default_param_perio_tx_fifo_size_09;
++ if(perio_tx_fifo_size_10>=0 && perio_tx_fifo_size_10<=32768)
++ ifxusb_module_params.tx_fifo_size[10]=perio_tx_fifo_size_10;
++ else
++ ifxusb_module_params.tx_fifo_size[10]=default_param_perio_tx_fifo_size_10;
++ if(perio_tx_fifo_size_11>=0 && perio_tx_fifo_size_11<=32768)
++ ifxusb_module_params.tx_fifo_size[11]=perio_tx_fifo_size_11;
++ else
++ ifxusb_module_params.tx_fifo_size[11]=default_param_perio_tx_fifo_size_11;
++ if(perio_tx_fifo_size_12>=0 && perio_tx_fifo_size_12<=32768)
++ ifxusb_module_params.tx_fifo_size[12]=perio_tx_fifo_size_12;
++ else
++ ifxusb_module_params.tx_fifo_size[12]=default_param_perio_tx_fifo_size_12;
++ if(perio_tx_fifo_size_13>=0 && perio_tx_fifo_size_13<=32768)
++ ifxusb_module_params.tx_fifo_size[13]=perio_tx_fifo_size_13;
++ else
++ ifxusb_module_params.tx_fifo_size[13]=default_param_perio_tx_fifo_size_13;
++ if(perio_tx_fifo_size_14>=0 && perio_tx_fifo_size_14<=32768)
++ ifxusb_module_params.tx_fifo_size[14]=perio_tx_fifo_size_14;
++ else
++ ifxusb_module_params.tx_fifo_size[14]=default_param_perio_tx_fifo_size_14;
++ if(perio_tx_fifo_size_15>=0 && perio_tx_fifo_size_15<=32768)
++ ifxusb_module_params.tx_fifo_size[15]=perio_tx_fifo_size_15;
++ else
++ ifxusb_module_params.tx_fifo_size[15]=default_param_perio_tx_fifo_size_15;
++ #endif //__DED_FIFO__
++ #endif //__IS_DEVICE__
++}
++
++
++
++
++
++
++
++module_param(dbg_lvl, long, 0444);
++MODULE_PARM_DESC(dbg_lvl, "Debug level.");
++
++module_param(dma_burst_size, short, 0444);
++MODULE_PARM_DESC(dma_burst_size, "DMA Burst Size 0, 1, 4, 8, 16");
++
++module_param(speed, short, 0444);
++MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed");
++
++module_param(data_fifo_size, long, 0444);
++MODULE_PARM_DESC(data_fifo_size, "Total number of words in the data FIFO memory 32-32768");
++
++#ifdef __IS_DEVICE__
++ module_param(rx_fifo_size, long, 0444);
++ MODULE_PARM_DESC(rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
++
++ #ifdef __DED_FIFO__
++ module_param(tx_fifo_size_00, long, 0444);
++ MODULE_PARM_DESC(tx_fifo_size_00, "Number of words in the Tx FIFO #00 16-32768");
++ module_param(tx_fifo_size_01, long, 0444);
++ MODULE_PARM_DESC(tx_fifo_size_01, "Number of words in the Tx FIFO #01 0-32768");
++ module_param(tx_fifo_size_02, long, 0444);
++ MODULE_PARM_DESC(tx_fifo_size_02, "Number of words in the Tx FIFO #02 0-32768");
++ module_param(tx_fifo_size_03, long, 0444);
++ MODULE_PARM_DESC(tx_fifo_size_03, "Number of words in the Tx FIFO #03 0-32768");
++ module_param(tx_fifo_size_04, long, 0444);
++ MODULE_PARM_DESC(tx_fifo_size_04, "Number of words in the Tx FIFO #04 0-32768");
++ module_param(tx_fifo_size_05, long, 0444);
++ MODULE_PARM_DESC(tx_fifo_size_05, "Number of words in the Tx FIFO #05 0-32768");
++ module_param(tx_fifo_size_06, long, 0444);
++ MODULE_PARM_DESC(tx_fifo_size_06, "Number of words in the Tx FIFO #06 0-32768");
++ module_param(tx_fifo_size_07, long, 0444);
++ MODULE_PARM_DESC(tx_fifo_size_07, "Number of words in the Tx FIFO #07 0-32768");
++ module_param(tx_fifo_size_08, long, 0444);
++ MODULE_PARM_DESC(tx_fifo_size_08, "Number of words in the Tx FIFO #08 0-32768");
++ module_param(tx_fifo_size_09, long, 0444);
++ MODULE_PARM_DESC(tx_fifo_size_09, "Number of words in the Tx FIFO #09 0-32768");
++ module_param(tx_fifo_size_10, long, 0444);
++ MODULE_PARM_DESC(tx_fifo_size_10, "Number of words in the Tx FIFO #10 0-32768");
++ module_param(tx_fifo_size_11, long, 0444);
++ MODULE_PARM_DESC(tx_fifo_size_11, "Number of words in the Tx FIFO #11 0-32768");
++ module_param(tx_fifo_size_12, long, 0444);
++ MODULE_PARM_DESC(tx_fifo_size_12, "Number of words in the Tx FIFO #12 0-32768");
++ module_param(tx_fifo_size_13, long, 0444);
++ MODULE_PARM_DESC(tx_fifo_size_13, "Number of words in the Tx FIFO #13 0-32768");
++ module_param(tx_fifo_size_14, long, 0444);
++ MODULE_PARM_DESC(tx_fifo_size_14, "Number of words in the Tx FIFO #14 0-32768");
++ module_param(tx_fifo_size_15, long, 0444);
++ MODULE_PARM_DESC(tx_fifo_size_15, "Number of words in the Tx FIFO #15 0-32768");
++
++ module_param(thr_ctl, short, 0444);
++ MODULE_PARM_DESC(thr_ctl, "0=Without 1=With Theshold Ctrl");
++
++ module_param(tx_thr_length, long, 0444);
++ MODULE_PARM_DESC(tx_thr_length, "TX Threshold length");
++
++ module_param(rx_thr_length, long, 0444);
++ MODULE_PARM_DESC(rx_thr_length, "RX Threshold length");
++
++ #else
++ module_param(nperio_tx_fifo_size, long, 0444);
++ MODULE_PARM_DESC(nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
++
++ module_param(perio_tx_fifo_size_01, long, 0444);
++ MODULE_PARM_DESC(perio_tx_fifo_size_01, "Number of words in the periodic Tx FIFO #01 0-32768");
++ module_param(perio_tx_fifo_size_02, long, 0444);
++ MODULE_PARM_DESC(perio_tx_fifo_size_02, "Number of words in the periodic Tx FIFO #02 0-32768");
++ module_param(perio_tx_fifo_size_03, long, 0444);
++ MODULE_PARM_DESC(perio_tx_fifo_size_03, "Number of words in the periodic Tx FIFO #03 0-32768");
++ module_param(perio_tx_fifo_size_04, long, 0444);
++ MODULE_PARM_DESC(perio_tx_fifo_size_04, "Number of words in the periodic Tx FIFO #04 0-32768");
++ module_param(perio_tx_fifo_size_05, long, 0444);
++ MODULE_PARM_DESC(perio_tx_fifo_size_05, "Number of words in the periodic Tx FIFO #05 0-32768");
++ module_param(perio_tx_fifo_size_06, long, 0444);
++ MODULE_PARM_DESC(perio_tx_fifo_size_06, "Number of words in the periodic Tx FIFO #06 0-32768");
++ module_param(perio_tx_fifo_size_07, long, 0444);
++ MODULE_PARM_DESC(perio_tx_fifo_size_07, "Number of words in the periodic Tx FIFO #07 0-32768");
++ module_param(perio_tx_fifo_size_08, long, 0444);
++ MODULE_PARM_DESC(perio_tx_fifo_size_08, "Number of words in the periodic Tx FIFO #08 0-32768");
++ module_param(perio_tx_fifo_size_09, long, 0444);
++ MODULE_PARM_DESC(perio_tx_fifo_size_09, "Number of words in the periodic Tx FIFO #09 0-32768");
++ module_param(perio_tx_fifo_size_10, long, 0444);
++ MODULE_PARM_DESC(perio_tx_fifo_size_10, "Number of words in the periodic Tx FIFO #10 0-32768");
++ module_param(perio_tx_fifo_size_11, long, 0444);
++ MODULE_PARM_DESC(perio_tx_fifo_size_11, "Number of words in the periodic Tx FIFO #11 0-32768");
++ module_param(perio_tx_fifo_size_12, long, 0444);
++ MODULE_PARM_DESC(perio_tx_fifo_size_12, "Number of words in the periodic Tx FIFO #12 0-32768");
++ module_param(perio_tx_fifo_size_13, long, 0444);
++ MODULE_PARM_DESC(perio_tx_fifo_size_13, "Number of words in the periodic Tx FIFO #13 0-32768");
++ module_param(perio_tx_fifo_size_14, long, 0444);
++ MODULE_PARM_DESC(perio_tx_fifo_size_14, "Number of words in the periodic Tx FIFO #14 0-32768");
++ module_param(perio_tx_fifo_size_15, long, 0444);
++ MODULE_PARM_DESC(perio_tx_fifo_size_15, "Number of words in the periodic Tx FIFO #15 0-32768");
++ #endif//__DED_FIFO__
++ module_param(dev_endpoints, short, 0444);
++ MODULE_PARM_DESC(dev_endpoints, "The number of endpoints in addition to EP0 available for device mode 1-15");
++#endif
++
++#ifdef __IS_HOST__
++ module_param(rx_fifo_size, long, 0444);
++ MODULE_PARM_DESC(rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
++
++ module_param(nperio_tx_fifo_size, long, 0444);
++ MODULE_PARM_DESC(nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
++
++ module_param(perio_tx_fifo_size, long, 0444);
++ MODULE_PARM_DESC(perio_tx_fifo_size, "Number of words in the host periodic Tx FIFO 16-32768");
++
++ module_param(host_channels, short, 0444);
++ MODULE_PARM_DESC(host_channels, "The number of host channel registers to use 1-16");
++#endif
++
++module_param(max_transfer_size, long, 0444);
++MODULE_PARM_DESC(max_transfer_size, "The maximum transfer size supported in bytes 2047-65535");
++
++module_param(max_packet_count, long, 0444);
++MODULE_PARM_DESC(max_packet_count, "The maximum number of packets in a transfer 15-511");
++
++module_param(phy_utmi_width, long, 0444);
++MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits");
++
++module_param(turn_around_time_hs, long, 0444);
++MODULE_PARM_DESC(turn_around_time_hs, "Turn-Around time for HS");
++
++module_param(turn_around_time_fs, long, 0444);
++MODULE_PARM_DESC(turn_around_time_fs, "Turn-Around time for FS");
++
++module_param(timeout_cal_hs, long, 0444);
++MODULE_PARM_DESC(timeout_cal_hs, "Timeout Cal for HS");
++
++module_param(timeout_cal_fs, long, 0444);
++MODULE_PARM_DESC(timeout_cal_fs, "Timeout Cal for FS");
++
++
+diff --git a/drivers/usb/ifxhcd/ifxusb_plat.h b/drivers/usb/ifxhcd/ifxusb_plat.h
+new file mode 100644
+index 0000000..a50294f
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxusb_plat.h
+@@ -0,0 +1,1018 @@
++/*****************************************************************************
++ ** FILE NAME : ifxusb_plat.h
++ ** PROJECT : IFX USB sub-system V3
++ ** MODULES : IFX USB sub-system Host and Device driver
++ ** SRC VERSION : 1.0
++ ** DATE : 1/Jan/2009
++ ** AUTHOR : Chen, Howard
++ ** DESCRIPTION : This file contains the Platform Specific constants, interfaces
++ ** (functions and macros).
++ ** FUNCTIONS :
++ ** COMPILER : gcc
++ ** REFERENCE : IFX hardware ref handbook for each plateforms
++ ** COPYRIGHT :
++ ** Version Control Section **
++ ** $Author$
++ ** $Date$
++ ** $Revisions$
++ ** $Log$ Revision history
++ *****************************************************************************/
++
++
++/*!
++ \defgroup IFXUSB_PLATEFORM_DEFINITION Platform Specific constants, interfaces (functions and macros).
++ \ingroup IFXUSB_DRIVER_V3
++ \brief Maintain plateform specific definitions and macros in this file.
++ Each plateform has its own definition zone.
++ */
++
++/*!
++ \defgroup IFXUSB_PLATEFORM_MEM_ADDR Definition of memory address and size and default parameters
++ \ingroup IFXUSB_PLATEFORM_DEFINITION
++ */
++
++/*!
++ \defgroup IFXUSB_DBG_ROUTINE Routines for debug message
++ \ingroup IFXUSB_PLATEFORM_DEFINITION
++ */
++
++
++/*! \file ifxusb_plat.h
++ \ingroup IFXUSB_DRIVER_V3
++ \brief This file contains the Platform Specific constants, interfaces (functions and macros).
++*/
++
++#if !defined(__IFXUSB_PLAT_H__)
++#define __IFXUSB_PLAT_H__
++
++
++#include <linux/types.h>
++#include <linux/slab.h>
++#include <linux/list.h>
++#include <linux/delay.h>
++#include <asm/io.h>
++
++
++#define IFXUSB_IOMEM_SIZE 0x00001000
++#define IFXUSB_FIFOMEM_SIZE 0x00010000
++#define IFXUSB_FIFODBG_SIZE 0x00020000
++
++
++
++/*!
++ \addtogroup IFXUSB_PLATEFORM_MEM_ADDR
++ */
++/*@{*/
++#if defined(__UEIP__)
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++// #define IFXUSB_IRQ 54
++ #define IFXUSB_IOMEM_BASE 0x1e101000
++ #define IFXUSB_FIFOMEM_BASE 0x1e120000
++ #define IFXUSB_FIFODBG_BASE 0x1e140000
++// #define IFXUSB_OC_IRQ 151
++
++ #ifndef DANUBE_RCU_BASE_ADDR
++ #define DANUBE_RCU_BASE_ADDR (0xBF203000)
++ #endif
++
++ #ifndef DANUBE_CGU
++ #define DANUBE_CGU (0xBF103000)
++ #endif
++ #ifndef DANUBE_CGU_IFCCR
++ #define DANUBE_CGU_IFCCR ((volatile unsigned long *)(DANUBE_CGU+ 0x0018))
++ #endif
++ #ifndef DANUBE_PMU
++ #define DANUBE_PMU (KSEG1+0x1F102000)
++ #endif
++ #ifndef DANUBE_PMU_PWDCR
++ #define DANUBE_PMU_PWDCR ((volatile unsigned long *)(DANUBE_PMU+0x001C))
++ #endif
++
++ #ifndef DANUBE_GPIO_P0_OUT
++ #define DANUBE_GPIO_P0_OUT (0xBF103000+0x10)
++ #define DANUBE_GPIO_P0_DIR (0xBF103000+0x18)
++ #define DANUBE_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
++ #define DANUBE_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
++ #define DANUBE_GPIO_P0_OD (0xBF103000+0x24)
++ #define DANUBE_GPIO_P0_PUDSEL (0xBF103000+0x2C)
++ #define DANUBE_GPIO_P0_PUDEN (0xBF103000+0x30)
++ #define DANUBE_GPIO_P1_OUT (0xBF103000+0x40)
++ #define DANUBE_GPIO_P1_DIR (0xBF103000+0x48)
++ #define DANUBE_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
++ #define DANUBE_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
++ #define DANUBE_GPIO_P1_OD (0xBF103000+0x54)
++ #define DANUBE_GPIO_P1_PUDSEL (0xBF103000+0x5C)
++ #define DANUBE_GPIO_P1_PUDEN (0xBF103000+0x60)
++ #endif
++
++ #define DANUBE_RCU_USBCFG ((volatile unsigned long *)(DANUBE_RCU_BASE_ADDR + 0x18))
++ #define DANUBE_RCU_RESET ((volatile unsigned long *)(DANUBE_RCU_BASE_ADDR + 0x10))
++ #define DANUBE_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
++ #define DANUBE_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
++ #define DANUBE_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end
++
++ #define default_param_dma_burst_size 4
++
++ #define default_param_speed IFXUSB_PARAM_SPEED_HIGH
++
++ #define default_param_max_transfer_size -1 //(Max, hwcfg)
++ #define default_param_max_packet_count -1 //(Max, hwcfg)
++ #define default_param_phy_utmi_width 16
++
++ #define default_param_turn_around_time_hs 4
++ #define default_param_turn_around_time_fs 4
++ #define default_param_timeout_cal_hs -1 //(NoChange)
++ #define default_param_timeout_cal_fs -1 //(NoChange)
++
++ #define default_param_data_fifo_size -1 //(Max, hwcfg)
++
++ #ifdef __IS_HOST__
++ #define default_param_host_channels -1 //(Max, hwcfg)
++ #define default_param_rx_fifo_size 640
++ #define default_param_nperio_tx_fifo_size 640
++ #define default_param_perio_tx_fifo_size 768
++ #endif //__IS_HOST__
++
++ #ifdef __IS_DEVICE__
++ #ifdef __DED_INTR__
++ #define default_param_rx_fifo_size 1024
++ #define default_param_nperio_tx_fifo_size 1016
++ #define default_param_perio_tx_fifo_size_01 8
++ #else
++ #define default_param_rx_fifo_size 1024
++ #define default_param_nperio_tx_fifo_size 1024
++ #define default_param_perio_tx_fifo_size_01 0
++ #endif
++ #define default_param_perio_tx_fifo_size_02 0
++ #define default_param_perio_tx_fifo_size_03 0
++ #define default_param_perio_tx_fifo_size_04 0
++ #define default_param_perio_tx_fifo_size_05 0
++ #define default_param_perio_tx_fifo_size_06 0
++ #define default_param_perio_tx_fifo_size_07 0
++ #define default_param_perio_tx_fifo_size_08 0
++ #define default_param_perio_tx_fifo_size_09 0
++ #define default_param_perio_tx_fifo_size_10 0
++ #define default_param_perio_tx_fifo_size_11 0
++ #define default_param_perio_tx_fifo_size_12 0
++ #define default_param_perio_tx_fifo_size_13 0
++ #define default_param_perio_tx_fifo_size_14 0
++ #define default_param_perio_tx_fifo_size_15 0
++ #endif //__IS_DEVICE__
++
++ #elif defined(__IS_AMAZON_SE__)
++ //#include <asm/amazon_se/amazon_se.h>
++ //#include <asm/amazon_se/irq.h>
++
++// #define IFXUSB_IRQ 31
++ #define IFXUSB_IOMEM_BASE 0x1e101000
++ #define IFXUSB_FIFOMEM_BASE 0x1e120000
++ #define IFXUSB_FIFODBG_BASE 0x1e140000
++// #define IFXUSB_OC_IRQ 20
++
++ #ifndef AMAZON_SE_RCU_BASE_ADDR
++ #define AMAZON_SE_RCU_BASE_ADDR (0xBF203000)
++ #endif
++ #define AMAZON_SE_RCU_USBCFG ((volatile unsigned long *)(AMAZON_SE_RCU_BASE_ADDR + 0x18))
++ #define AMAZON_SE_RCU_RESET ((volatile unsigned long *)(AMAZON_SE_RCU_BASE_ADDR + 0x10))
++ #define AMAZON_SE_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
++ #define AMAZON_SE_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
++ #define AMAZON_SE_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end
++
++ #ifndef AMAZON_SE_GPIO_P0_OUT
++ #define AMAZON_SE_GPIO_P0_OUT (0xBF103000+0x10)
++ #define AMAZON_SE_GPIO_P0_DIR (0xBF103000+0x18)
++ #define AMAZON_SE_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
++ #define AMAZON_SE_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
++ #define AMAZON_SE_GPIO_P0_OD (0xBF103000+0x24)
++ #define AMAZON_SE_GPIO_P0_PUDSEL (0xBF103000+0x2C)
++ #define AMAZON_SE_GPIO_P0_PUDEN (0xBF103000+0x30)
++ #define AMAZON_SE_GPIO_P1_OUT (0xBF103000+0x40)
++ #define AMAZON_SE_GPIO_P1_DIR (0xBF103000+0x48)
++ #define AMAZON_SE_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
++ #define AMAZON_SE_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
++ #define AMAZON_SE_GPIO_P1_OD (0xBF103000+0x54)
++ #define AMAZON_SE_GPIO_P1_PUDSEL (0xBF103000+0x5C)
++ #define AMAZON_SE_GPIO_P1_PUDEN (0xBF103000+0x60)
++ #endif
++
++ #ifndef AMAZON_SE_CGU
++ #define AMAZON_SE_CGU (0xBF103000)
++ #endif
++ #ifndef AMAZON_SE_CGU_IFCCR
++ #define AMAZON_SE_CGU_IFCCR ((volatile unsigned long *)(AMAZON_SE_CGU+ 0x0018))
++ #endif
++ #ifndef AMAZON_SE_PMU
++ #define AMAZON_SE_PMU (KSEG1+0x1F102000)
++ #endif
++ #ifndef AMAZON_SE_PMU_PWDCR
++ #define AMAZON_SE_PMU_PWDCR ((volatile unsigned long *)(AMAZON_SE_PMU+0x001C))
++ #endif
++
++ #define default_param_dma_burst_size 4
++
++ #define default_param_speed IFXUSB_PARAM_SPEED_HIGH
++
++ #define default_param_max_transfer_size -1 //(Max, hwcfg)
++ #define default_param_max_packet_count -1 //(Max, hwcfg)
++ #define default_param_phy_utmi_width 16
++
++ #define default_param_turn_around_time_hs 4 //(NoChange)
++ #define default_param_turn_around_time_fs 4 //(NoChange)
++ #define default_param_timeout_cal_hs -1 //(NoChange)
++ #define default_param_timeout_cal_fs -1 //(NoChange)
++
++ #define default_param_data_fifo_size -1 //(Max, hwcfg)
++
++ #ifdef __IS_HOST__
++ #define default_param_host_channels -1 //(Max, hwcfg)
++ #define default_param_rx_fifo_size 240
++ #define default_param_nperio_tx_fifo_size 240
++ #define default_param_perio_tx_fifo_size 32
++ #endif //__IS_HOST__
++ #ifdef __IS_DEVICE__
++ #ifdef __DED_INTR__
++ #define default_param_rx_fifo_size 256
++ #define default_param_nperio_tx_fifo_size 248
++ #define default_param_perio_tx_fifo_size_01 8
++ #else
++ #define default_param_rx_fifo_size 256
++ #define default_param_nperio_tx_fifo_size 256
++ #define default_param_perio_tx_fifo_size_01 0
++ #endif
++ #define default_param_perio_tx_fifo_size_02 0
++ #define default_param_perio_tx_fifo_size_03 0
++ #define default_param_perio_tx_fifo_size_04 0
++ #define default_param_perio_tx_fifo_size_05 0
++ #define default_param_perio_tx_fifo_size_06 0
++ #define default_param_perio_tx_fifo_size_07 0
++ #define default_param_perio_tx_fifo_size_08 0
++ #define default_param_perio_tx_fifo_size_09 0
++ #define default_param_perio_tx_fifo_size_10 0
++ #define default_param_perio_tx_fifo_size_11 0
++ #define default_param_perio_tx_fifo_size_12 0
++ #define default_param_perio_tx_fifo_size_13 0
++ #define default_param_perio_tx_fifo_size_14 0
++ #define default_param_perio_tx_fifo_size_15 0
++ #endif //__IS_DEVICE__
++
++ #elif defined(__IS_AR9__)
++// #define IFXUSB1_IRQ 54
++ #define IFXUSB1_IOMEM_BASE 0x1E101000
++ #define IFXUSB1_FIFOMEM_BASE 0x1E120000
++ #define IFXUSB1_FIFODBG_BASE 0x1E140000
++
++// #define IFXUSB2_IRQ 83
++ #define IFXUSB2_IOMEM_BASE 0x1E106000
++ #define IFXUSB2_FIFOMEM_BASE 0x1E1E0000
++ #define IFXUSB2_FIFODBG_BASE 0x1E1C0000
++
++// #define IFXUSB_OC_IRQ 60
++
++ #ifndef AR9_RCU_BASE_ADDR
++ #define AR9_RCU_BASE_ADDR (0xBF203000)
++ #endif
++
++ #ifndef AR9_CGU
++ #define AR9_CGU (0xBF103000)
++ #endif
++ #ifndef AR9_CGU_IFCCR
++ #define AR9_CGU_IFCCR ((volatile unsigned long *)(AR9_CGU+ 0x0018))
++ #endif
++
++ #ifndef AR9_PMU
++ #define AR9_PMU (KSEG1+0x1F102000)
++ #endif
++ #ifndef AR9_PMU_PWDCR
++ #define AR9_PMU_PWDCR ((volatile unsigned long *)(AR9_PMU+0x001C))
++ #endif
++
++ #ifndef AR9_GPIO_P0_OUT
++ #define AR9_GPIO_P0_OUT (0xBF103000+0x10)
++ #define AR9_GPIO_P0_DIR (0xBF103000+0x18)
++ #define AR9_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
++ #define AR9_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
++ #define AR9_GPIO_P0_OD (0xBF103000+0x24)
++ #define AR9_GPIO_P0_PUDSEL (0xBF103000+0x2C)
++ #define AR9_GPIO_P0_PUDEN (0xBF103000+0x30)
++ #define AR9_GPIO_P1_OUT (0xBF103000+0x40)
++ #define AR9_GPIO_P1_DIR (0xBF103000+0x48)
++ #define AR9_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
++ #define AR9_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
++ #define AR9_GPIO_P1_OD (0xBF103000+0x54)
++ #define AR9_GPIO_P1_PUDSEL (0xBF103000+0x5C)
++ #define AR9_GPIO_P1_PUDEN (0xBF103000+0x60)
++ #endif
++
++ #define AR9_RCU_USB1CFG ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x18))
++ #define AR9_RCU_USB2CFG ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x34))
++ #define AR9_RCU_USBRESET ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x10))
++ #define AR9_USBCFG_ARB 7 //
++ #define AR9_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
++ #define AR9_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
++ #define AR9_USBCFG_SLV_END_BIT 17 // 0:little_end, 1:big_end
++
++ #define default_param_dma_burst_size 4
++
++ #define default_param_speed IFXUSB_PARAM_SPEED_HIGH
++
++ #define default_param_max_transfer_size -1 //(Max, hwcfg)
++ #define default_param_max_packet_count -1 //(Max, hwcfg)
++ #define default_param_phy_utmi_width 16
++
++ #define default_param_turn_around_time_hs 4 //(NoChange)
++ #define default_param_turn_around_time_fs 4 //(NoChange)
++ #define default_param_timeout_cal_hs -1 //(NoChange)
++ #define default_param_timeout_cal_fs -1 //(NoChange)
++
++ #define default_param_data_fifo_size -1 //(Max, hwcfg)
++
++ #ifdef __IS_HOST__
++ #define default_param_host_channels -1 //(Max, hwcfg)
++ #define default_param_rx_fifo_size 240
++ #define default_param_nperio_tx_fifo_size 240
++ #define default_param_perio_tx_fifo_size 32
++ #endif //__IS_HOST__
++ #ifdef __IS_DEVICE__
++ #ifdef __DED_INTR__
++ #define default_param_rx_fifo_size 256
++// #define default_param_nperio_tx_fifo_size 248
++// #define default_param_perio_tx_fifo_size_01 8
++ #define default_param_nperio_tx_fifo_size 252
++ #define default_param_perio_tx_fifo_size_01 4
++ #else
++ #define default_param_rx_fifo_size 256
++ #define default_param_nperio_tx_fifo_size 256
++ #define default_param_perio_tx_fifo_size_01 0
++ #endif
++ #define default_param_perio_tx_fifo_size_02 0
++ #define default_param_perio_tx_fifo_size_03 0
++ #define default_param_perio_tx_fifo_size_04 0
++ #define default_param_perio_tx_fifo_size_05 0
++ #define default_param_perio_tx_fifo_size_06 0
++ #define default_param_perio_tx_fifo_size_07 0
++ #define default_param_perio_tx_fifo_size_08 0
++ #define default_param_perio_tx_fifo_size_09 0
++ #define default_param_perio_tx_fifo_size_10 0
++ #define default_param_perio_tx_fifo_size_11 0
++ #define default_param_perio_tx_fifo_size_12 0
++ #define default_param_perio_tx_fifo_size_13 0
++ #define default_param_perio_tx_fifo_size_14 0
++ #define default_param_perio_tx_fifo_size_15 0
++ #endif //__IS_DEVICE__
++
++ #elif defined(__IS_VR9__)
++// #define IFXUSB1_IRQ 54
++ #define IFXUSB1_IOMEM_BASE 0x1E101000
++ #define IFXUSB1_FIFOMEM_BASE 0x1E120000
++ #define IFXUSB1_FIFODBG_BASE 0x1E140000
++
++// #define IFXUSB2_IRQ 83
++ #define IFXUSB2_IOMEM_BASE 0x1E106000
++ #define IFXUSB2_FIFOMEM_BASE 0x1E1E0000
++ #define IFXUSB2_FIFODBG_BASE 0x1E1C0000
++// #define IFXUSB_OC_IRQ 60
++
++ #ifndef VR9_RCU_BASE_ADDR
++ #define VR9_RCU_BASE_ADDR (0xBF203000)
++ #endif
++
++ #ifndef VR9_CGU
++ #define VR9_CGU (0xBF103000)
++ #endif
++ #ifndef VR9_CGU_IFCCR
++ #define VR9_CGU_IFCCR ((volatile unsigned long *)(VR9_CGU+ 0x0018))
++ #endif
++
++ #ifndef VR9_PMU
++ #define VR9_PMU (KSEG1+0x1F102000)
++ #endif
++ #ifndef VR9_PMU_PWDCR
++ #define VR9_PMU_PWDCR ((volatile unsigned long *)(VR9_PMU+0x001C))
++ #endif
++
++ #ifndef VR9_GPIO_P0_OUT
++ #define VR9_GPIO_P0_OUT (0xBF103000+0x10)
++ #define VR9_GPIO_P0_DIR (0xBF103000+0x18)
++ #define VR9_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
++ #define VR9_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
++ #define VR9_GPIO_P0_OD (0xBF103000+0x24)
++ #define VR9_GPIO_P0_PUDSEL (0xBF103000+0x2C)
++ #define VR9_GPIO_P0_PUDEN (0xBF103000+0x30)
++ #define VR9_GPIO_P1_OUT (0xBF103000+0x40)
++ #define VR9_GPIO_P1_DIR (0xBF103000+0x48)
++ #define VR9_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
++ #define VR9_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
++ #define VR9_GPIO_P1_OD (0xBF103000+0x54)
++ #define VR9_GPIO_P1_PUDSEL (0xBF103000+0x5C)
++ #define VR9_GPIO_P1_PUDEN (0xBF103000+0x60)
++ #endif
++
++ #define VR9_RCU_USB1CFG ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x18))
++ #define VR9_RCU_USB2CFG ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x34))
++ #define VR9_RCU_USB_ANA_CFG1A ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x38))
++ #define VR9_RCU_USB_ANA_CFG1B ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x3C))
++ #define VR9_RCU_USBRESET ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x10))
++ #define VR9_RCU_USBRESET2 ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x48))
++ #define VR9_USBCFG_ARB 7 //
++ #define VR9_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
++ #define VR9_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
++ #define VR9_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end
++
++ /*== AVM/BC 20101220 Workaround VR9 DMA burst size ==
++ * Using 2 Devices in diferent ports cause a general USB Host Error.
++ * Workaround found in UGW4.3
++ */
++// #define default_param_dma_burst_size 4 //(ALL)
++ //WA for AHB
++ #define default_param_dma_burst_size 0 //(ALL)
++
++ #define default_param_speed IFXUSB_PARAM_SPEED_HIGH
++
++ #define default_param_max_transfer_size -1 //(Max, hwcfg)
++ #define default_param_max_packet_count -1 //(Max, hwcfg)
++ #define default_param_phy_utmi_width 16
++
++ #define default_param_turn_around_time_hs 6 //(NoChange) snpsid >= 0x4f54260a
++ #define default_param_turn_around_time_fs 6 //(NoChange) snpsid >= 0x4f54260a
++ #define default_param_timeout_cal_hs -1 //(NoChange)
++ #define default_param_timeout_cal_fs -1 //(NoChange)
++
++ #define default_param_data_fifo_size -1 //(Max, hwcfg)
++
++ #ifdef __IS_HOST__
++ #define default_param_host_channels -1 //(Max, hwcfg)
++ #define default_param_rx_fifo_size 240
++ #define default_param_nperio_tx_fifo_size 240
++ #define default_param_perio_tx_fifo_size 32
++ #endif //__IS_HOST__
++ #ifdef __IS_DEVICE__
++#if 0
++ #define default_param_rx_fifo_size 256
++ #define default_param_tx_fifo_size_00 -1
++ #define default_param_tx_fifo_size_01 -1
++ #define default_param_tx_fifo_size_02 -1
++#else
++ #define default_param_rx_fifo_size 256
++ #define default_param_tx_fifo_size_00 32
++ #define default_param_tx_fifo_size_01 200
++ #define default_param_tx_fifo_size_02 8
++#endif
++ #define default_param_tx_fifo_size_03 -1
++ #define default_param_tx_fifo_size_04 -1
++ #define default_param_tx_fifo_size_05 -1
++ #define default_param_tx_fifo_size_06 -1
++ #define default_param_tx_fifo_size_07 -1
++ #define default_param_tx_fifo_size_08 -1
++ #define default_param_tx_fifo_size_09 -1
++ #define default_param_tx_fifo_size_10 -1
++ #define default_param_tx_fifo_size_11 -1
++ #define default_param_tx_fifo_size_12 -1
++ #define default_param_tx_fifo_size_13 -1
++ #define default_param_tx_fifo_size_14 -1
++ #define default_param_tx_fifo_size_15 -1
++ #define default_param_dma_unalgned_tx -1
++ #define default_param_dma_unalgned_rx -1
++ #define default_param_thr_ctl -1
++ #define default_param_tx_thr_length -1
++ #define default_param_rx_thr_length -1
++ #endif //__IS_DEVICE__
++ #else // __IS_VR9__
++ #error "Please choose one platform!!"
++ #endif // __IS_VR9__
++
++#else //UEIP
++ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
++// #define IFXUSB_IRQ 54
++ #define IFXUSB_IOMEM_BASE 0x1e101000
++ #define IFXUSB_FIFOMEM_BASE 0x1e120000
++ #define IFXUSB_FIFODBG_BASE 0x1e140000
++// #define IFXUSB_OC_IRQ 151
++
++
++ #ifndef DANUBE_RCU_BASE_ADDR
++ #define DANUBE_RCU_BASE_ADDR (0xBF203000)
++ #endif
++
++ #ifndef DANUBE_CGU
++ #define DANUBE_CGU (0xBF103000)
++ #endif
++ #ifndef DANUBE_CGU_IFCCR
++ #define DANUBE_CGU_IFCCR ((volatile unsigned long *)(DANUBE_CGU+ 0x0018))
++ #endif
++ #ifndef DANUBE_PMU
++ #define DANUBE_PMU (KSEG1+0x1F102000)
++ #endif
++ #ifndef DANUBE_PMU_PWDCR
++ #define DANUBE_PMU_PWDCR ((volatile unsigned long *)(DANUBE_PMU+0x001C))
++ #endif
++
++ #ifndef DANUBE_GPIO_P0_OUT
++ #define DANUBE_GPIO_P0_OUT (0xBF103000+0x10)
++ #define DANUBE_GPIO_P0_DIR (0xBF103000+0x18)
++ #define DANUBE_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
++ #define DANUBE_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
++ #define DANUBE_GPIO_P0_OD (0xBF103000+0x24)
++ #define DANUBE_GPIO_P0_PUDSEL (0xBF103000+0x2C)
++ #define DANUBE_GPIO_P0_PUDEN (0xBF103000+0x30)
++ #define DANUBE_GPIO_P1_OUT (0xBF103000+0x40)
++ #define DANUBE_GPIO_P1_DIR (0xBF103000+0x48)
++ #define DANUBE_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
++ #define DANUBE_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
++ #define DANUBE_GPIO_P1_OD (0xBF103000+0x54)
++ #define DANUBE_GPIO_P1_PUDSEL (0xBF103000+0x5C)
++ #define DANUBE_GPIO_P1_PUDEN (0xBF103000+0x60)
++ #endif
++
++
++ #define DANUBE_RCU_USBCFG ((volatile unsigned long *)(DANUBE_RCU_BASE_ADDR + 0x18))
++ #define DANUBE_RCU_RESET ((volatile unsigned long *)(DANUBE_RCU_BASE_ADDR + 0x10))
++ #define DANUBE_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
++ #define DANUBE_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
++ #define DANUBE_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end
++
++ #define default_param_dma_burst_size 4
++
++ #define default_param_speed IFXUSB_PARAM_SPEED_HIGH
++
++ #define default_param_max_transfer_size -1 //(Max, hwcfg)
++ #define default_param_max_packet_count -1 //(Max, hwcfg)
++ #define default_param_phy_utmi_width 16
++
++ #define default_param_turn_around_time_hs 4 //(NoChange)
++ #define default_param_turn_around_time_fs 4 //(NoChange)
++ #define default_param_timeout_cal_hs -1 //(NoChange)
++ #define default_param_timeout_cal_fs -1 //(NoChange)
++
++ #define default_param_data_fifo_size -1 //(Max, hwcfg)
++ #ifdef __IS_HOST__
++ #define default_param_host_channels -1 //(Max, hwcfg)
++ #define default_param_rx_fifo_size 640
++ #define default_param_nperio_tx_fifo_size 640
++ #define default_param_perio_tx_fifo_size 768
++ #endif //__IS_HOST__
++
++ #ifdef __IS_DEVICE__
++ #ifdef __DED_INTR__
++ #define default_param_rx_fifo_size 1024
++ #define default_param_nperio_tx_fifo_size 1016
++ #define default_param_perio_tx_fifo_size_01 8
++ #else
++ #define default_param_rx_fifo_size 1024
++ #define default_param_nperio_tx_fifo_size 1024
++ #define default_param_perio_tx_fifo_size_01 0
++ #endif
++ #define default_param_perio_tx_fifo_size_02 0
++ #define default_param_perio_tx_fifo_size_03 0
++ #define default_param_perio_tx_fifo_size_04 0
++ #define default_param_perio_tx_fifo_size_05 0
++ #define default_param_perio_tx_fifo_size_06 0
++ #define default_param_perio_tx_fifo_size_07 0
++ #define default_param_perio_tx_fifo_size_08 0
++ #define default_param_perio_tx_fifo_size_09 0
++ #define default_param_perio_tx_fifo_size_10 0
++ #define default_param_perio_tx_fifo_size_11 0
++ #define default_param_perio_tx_fifo_size_12 0
++ #define default_param_perio_tx_fifo_size_13 0
++ #define default_param_perio_tx_fifo_size_14 0
++ #define default_param_perio_tx_fifo_size_15 0
++ #endif //__IS_DEVICE__
++
++ #elif defined(__IS_AMAZON_SE__)
++ #include <asm/amazon_se/amazon_se.h>
++ //#include <asm/amazon_se/irq.h>
++
++// #define IFXUSB_IRQ 31
++ #define IFXUSB_IOMEM_BASE 0x1e101000
++ #define IFXUSB_FIFOMEM_BASE 0x1e120000
++ #define IFXUSB_FIFODBG_BASE 0x1e140000
++// #define IFXUSB_OC_IRQ 20
++
++ #define AMAZON_SE_RCU_USBCFG ((volatile unsigned long *)(AMAZON_SE_RCU_BASE_ADDR + 0x18))
++ #define AMAZON_SE_RCU_RESET ((volatile unsigned long *)(AMAZON_SE_RCU_BASE_ADDR + 0x10))
++ #define AMAZON_SE_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
++ #define AMAZON_SE_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
++ #define AMAZON_SE_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end
++
++ #ifndef AMAZON_SE_GPIO_P0_OUT
++ #define AMAZON_SE_GPIO_P0_OUT (0xBF103000+0x10)
++ #define AMAZON_SE_GPIO_P0_DIR (0xBF103000+0x18)
++ #define AMAZON_SE_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
++ #define AMAZON_SE_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
++ #define AMAZON_SE_GPIO_P0_OD (0xBF103000+0x24)
++ #define AMAZON_SE_GPIO_P0_PUDSEL (0xBF103000+0x2C)
++ #define AMAZON_SE_GPIO_P0_PUDEN (0xBF103000+0x30)
++ #define AMAZON_SE_GPIO_P1_OUT (0xBF103000+0x40)
++ #define AMAZON_SE_GPIO_P1_DIR (0xBF103000+0x48)
++ #define AMAZON_SE_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
++ #define AMAZON_SE_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
++ #define AMAZON_SE_GPIO_P1_OD (0xBF103000+0x54)
++ #define AMAZON_SE_GPIO_P1_PUDSEL (0xBF103000+0x5C)
++ #define AMAZON_SE_GPIO_P1_PUDEN (0xBF103000+0x60)
++ #endif
++
++
++ #ifndef AMAZON_SE_CGU
++ #define AMAZON_SE_CGU (0xBF103000)
++ #endif
++ #ifndef AMAZON_SE_CGU_IFCCR
++ #define AMAZON_SE_CGU_IFCCR ((volatile unsigned long *)(AMAZON_SE_CGU+ 0x0018))
++ #endif
++ #ifndef AMAZON_SE_PMU
++ #define AMAZON_SE_PMU (KSEG1+0x1F102000)
++ #endif
++ #ifndef AMAZON_SE_PMU_PWDCR
++ #define AMAZON_SE_PMU_PWDCR ((volatile unsigned long *)(AMAZON_SE_PMU+0x001C))
++ #endif
++
++ #define default_param_dma_burst_size 4
++
++ #define default_param_speed IFXUSB_PARAM_SPEED_HIGH
++
++ #define default_param_max_transfer_size -1 //(Max, hwcfg)
++ #define default_param_max_packet_count -1 //(Max, hwcfg)
++ #define default_param_phy_utmi_width 16
++
++ #define default_param_turn_around_time_hs 4 //(NoChange)
++ #define default_param_turn_around_time_fs 4 //(NoChange)
++ #define default_param_timeout_cal_hs -1 //(NoChange)
++ #define default_param_timeout_cal_fs -1 //(NoChange)
++
++ #define default_param_data_fifo_size -1 //(Max, hwcfg)
++
++ #ifdef __IS_HOST__
++ #define default_param_host_channels -1 //(Max, hwcfg)
++ #define default_param_rx_fifo_size 240
++ #define default_param_nperio_tx_fifo_size 240
++ #define default_param_perio_tx_fifo_size 32
++ #endif //__IS_HOST__
++ #ifdef __IS_DEVICE__
++ #ifdef __DED_INTR__
++ #define default_param_rx_fifo_size 256
++ #define default_param_nperio_tx_fifo_size 248
++ #define default_param_perio_tx_fifo_size_01 8
++ #else
++ #define default_param_rx_fifo_size 256
++ #define default_param_nperio_tx_fifo_size 256
++ #define default_param_perio_tx_fifo_size_01 0
++ #endif
++ #define default_param_perio_tx_fifo_size_02 0
++ #define default_param_perio_tx_fifo_size_03 0
++ #define default_param_perio_tx_fifo_size_04 0
++ #define default_param_perio_tx_fifo_size_05 0
++ #define default_param_perio_tx_fifo_size_06 0
++ #define default_param_perio_tx_fifo_size_07 0
++ #define default_param_perio_tx_fifo_size_08 0
++ #define default_param_perio_tx_fifo_size_09 0
++ #define default_param_perio_tx_fifo_size_10 0
++ #define default_param_perio_tx_fifo_size_11 0
++ #define default_param_perio_tx_fifo_size_12 0
++ #define default_param_perio_tx_fifo_size_13 0
++ #define default_param_perio_tx_fifo_size_14 0
++ #define default_param_perio_tx_fifo_size_15 0
++ #endif //__IS_DEVICE__
++
++ #elif defined(__IS_AR9__)
++// #define IFXUSB1_IRQ 54
++ #define IFXUSB1_IOMEM_BASE 0x1E101000
++ #define IFXUSB1_FIFOMEM_BASE 0x1E120000
++ #define IFXUSB1_FIFODBG_BASE 0x1E140000
++
++// #define IFXUSB2_IRQ 83
++ #define IFXUSB2_IOMEM_BASE 0x1E106000
++ #define IFXUSB2_FIFOMEM_BASE 0x1E1E0000
++ #define IFXUSB2_FIFODBG_BASE 0x1E1C0000
++
++// #define IFXUSB_OC_IRQ 60
++
++ #ifndef AMAZON_S_RCU_BASE_ADDR
++ #define AMAZON_S_RCU_BASE_ADDR (0xBF203000)
++ #endif
++
++ #ifndef AMAZON_S_CGU
++ #define AMAZON_S_CGU (0xBF103000)
++ #endif
++ #ifndef AMAZON_S_CGU_IFCCR
++ #define AMAZON_S_CGU_IFCCR ((volatile unsigned long *)(AMAZON_S_CGU+ 0x0018))
++ #endif
++
++ #ifndef AMAZON_S_PMU
++ #define AMAZON_S_PMU (KSEG1+0x1F102000)
++ #endif
++ #ifndef AMAZON_S_PMU_PWDCR
++ #define AMAZON_S_PMU_PWDCR ((volatile unsigned long *)(AMAZON_S_PMU+0x001C))
++ #endif
++
++ #ifndef AMAZON_S_GPIO_P0_OUT
++ #define AMAZON_S_GPIO_P0_OUT (0xBF103000+0x10)
++ #define AMAZON_S_GPIO_P0_DIR (0xBF103000+0x18)
++ #define AMAZON_S_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
++ #define AMAZON_S_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
++ #define AMAZON_S_GPIO_P0_OD (0xBF103000+0x24)
++ #define AMAZON_S_GPIO_P0_PUDSEL (0xBF103000+0x2C)
++ #define AMAZON_S_GPIO_P0_PUDEN (0xBF103000+0x30)
++ #define AMAZON_S_GPIO_P1_OUT (0xBF103000+0x40)
++ #define AMAZON_S_GPIO_P1_DIR (0xBF103000+0x48)
++ #define AMAZON_S_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
++ #define AMAZON_S_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
++ #define AMAZON_S_GPIO_P1_OD (0xBF103000+0x54)
++ #define AMAZON_S_GPIO_P1_PUDSEL (0xBF103000+0x5C)
++ #define AMAZON_S_GPIO_P1_PUDEN (0xBF103000+0x60)
++ #endif
++
++ #define AMAZON_S_RCU_USB1CFG ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x18))
++ #define AMAZON_S_RCU_USB2CFG ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x34))
++ #define AMAZON_S_RCU_USBRESET ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x10))
++ #define AMAZON_S_USBCFG_ARB 7 //
++ #define AMAZON_S_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
++ #define AMAZON_S_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
++ #define AMAZON_S_USBCFG_SLV_END_BIT 17 // 0:little_end, 1:big_end
++
++ #define default_param_dma_burst_size 4
++
++ #define default_param_speed IFXUSB_PARAM_SPEED_HIGH
++
++ #define default_param_max_transfer_size -1 //(Max, hwcfg)
++ #define default_param_max_packet_count -1 //(Max, hwcfg)
++ #define default_param_phy_utmi_width 16
++
++ #define default_param_turn_around_time_hs 4 //(NoChange)
++ #define default_param_turn_around_time_fs 4 //(NoChange)
++ #define default_param_timeout_cal_hs -1 //(NoChange)
++ #define default_param_timeout_cal_fs -1 //(NoChange)
++
++ #define default_param_data_fifo_size -1 //(Max, hwcfg)
++
++ #ifdef __IS_HOST__
++ #define default_param_host_channels -1 //(Max, hwcfg)
++ #define default_param_rx_fifo_size 240
++ #define default_param_nperio_tx_fifo_size 240
++ #define default_param_perio_tx_fifo_size 32
++ #endif //__IS_HOST__
++ #ifdef __IS_DEVICE__
++ #ifdef __DED_INTR__
++ #define default_param_rx_fifo_size 256
++ #define default_param_nperio_tx_fifo_size 248
++ #define default_param_perio_tx_fifo_size_01 8
++ #else
++ #define default_param_rx_fifo_size 256
++ #define default_param_nperio_tx_fifo_size 256
++ #define default_param_perio_tx_fifo_size_01 0
++ #endif
++ #define default_param_perio_tx_fifo_size_02 0
++ #define default_param_perio_tx_fifo_size_03 0
++ #define default_param_perio_tx_fifo_size_04 0
++ #define default_param_perio_tx_fifo_size_05 0
++ #define default_param_perio_tx_fifo_size_06 0
++ #define default_param_perio_tx_fifo_size_07 0
++ #define default_param_perio_tx_fifo_size_08 0
++ #define default_param_perio_tx_fifo_size_09 0
++ #define default_param_perio_tx_fifo_size_10 0
++ #define default_param_perio_tx_fifo_size_11 0
++ #define default_param_perio_tx_fifo_size_12 0
++ #define default_param_perio_tx_fifo_size_13 0
++ #define default_param_perio_tx_fifo_size_14 0
++ #define default_param_perio_tx_fifo_size_15 0
++ #endif //__IS_DEVICE__
++
++ #elif defined(__IS_VR9__)
++// #define IFXUSB1_IRQ 54
++ #define IFXUSB1_IOMEM_BASE 0x1E101000
++ #define IFXUSB1_FIFOMEM_BASE 0x1E120000
++ #define IFXUSB1_FIFODBG_BASE 0x1E140000
++
++// #define IFXUSB2_IRQ 83
++ #define IFXUSB2_IOMEM_BASE 0x1E106000
++ #define IFXUSB2_FIFOMEM_BASE 0x1E1E0000
++ #define IFXUSB2_FIFODBG_BASE 0x1E1C0000
++// #define IFXUSB_OC_IRQ 60
++
++ #ifndef AMAZON_S_RCU_BASE_ADDR
++ #define AMAZON_S_RCU_BASE_ADDR (0xBF203000)
++ #endif
++
++ #ifndef AMAZON_S_CGU
++ #define AMAZON_S_CGU (0xBF103000)
++ #endif
++ #ifndef AMAZON_S_CGU_IFCCR
++ #define AMAZON_S_CGU_IFCCR ((volatile unsigned long *)(AMAZON_S_CGU+ 0x0018))
++ #endif
++
++ #ifndef AMAZON_S_PMU
++ #define AMAZON_S_PMU (KSEG1+0x1F102000)
++ #endif
++ #ifndef AMAZON_S_PMU_PWDCR
++ #define AMAZON_S_PMU_PWDCR ((volatile unsigned long *)(AMAZON_S_PMU+0x001C))
++ #endif
++
++ #ifndef AMAZON_S_GPIO_P0_OUT
++ #define AMAZON_S_GPIO_P0_OUT (0xBF103000+0x10)
++ #define AMAZON_S_GPIO_P0_DIR (0xBF103000+0x18)
++ #define AMAZON_S_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
++ #define AMAZON_S_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
++ #define AMAZON_S_GPIO_P0_OD (0xBF103000+0x24)
++ #define AMAZON_S_GPIO_P0_PUDSEL (0xBF103000+0x2C)
++ #define AMAZON_S_GPIO_P0_PUDEN (0xBF103000+0x30)
++ #define AMAZON_S_GPIO_P1_OUT (0xBF103000+0x40)
++ #define AMAZON_S_GPIO_P1_DIR (0xBF103000+0x48)
++ #define AMAZON_S_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
++ #define AMAZON_S_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
++ #define AMAZON_S_GPIO_P1_OD (0xBF103000+0x54)
++ #define AMAZON_S_GPIO_P1_PUDSEL (0xBF103000+0x5C)
++ #define AMAZON_S_GPIO_P1_PUDEN (0xBF103000+0x60)
++ #endif
++
++ #define AMAZON_S_RCU_USB1CFG ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x18))
++ #define AMAZON_S_RCU_USB2CFG ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x34))
++ #define AMAZON_S_RCU_USBRESET ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x10))
++ #define AMAZON_S_USBCFG_ARB 7 //
++ #define AMAZON_S_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
++ #define AMAZON_S_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
++ #define AMAZON_S_USBCFG_SLV_END_BIT 17 // 0:little_end, 1:big_end
++
++ #define default_param_dma_burst_size 4 //(ALL)
++
++ #define default_param_speed IFXUSB_PARAM_SPEED_HIGH
++
++ #define default_param_max_transfer_size -1 //(Max, hwcfg)
++ #define default_param_max_packet_count -1 //(Max, hwcfg)
++ #define default_param_phy_utmi_width 16
++
++ #define default_param_turn_around_time_hs 6 //(NoChange) snpsid >= 0x4f54260a
++ #define default_param_turn_around_time_fs 6 //(NoChange) snpsid >= 0x4f54260a
++ #define default_param_timeout_cal_hs -1 //(NoChange)
++ #define default_param_timeout_cal_fs -1 //(NoChange)
++
++ #define default_param_data_fifo_size -1 //(Max, hwcfg)
++
++ #ifdef __IS_HOST__
++ #define default_param_host_channels -1 //(Max, hwcfg)
++ #define default_param_rx_fifo_size 240
++ #define default_param_nperio_tx_fifo_size 240
++ #define default_param_perio_tx_fifo_size 32
++ #endif //__IS_HOST__
++ #ifdef __IS_DEVICE__
++ #define default_param_rx_fifo_size 256
++ #define default_param_tx_fifo_size_00 -1
++ #define default_param_tx_fifo_size_01 -1
++ #define default_param_tx_fifo_size_02 -1
++ #define default_param_tx_fifo_size_03 -1
++ #define default_param_tx_fifo_size_04 -1
++ #define default_param_tx_fifo_size_05 -1
++ #define default_param_tx_fifo_size_06 -1
++ #define default_param_tx_fifo_size_07 -1
++ #define default_param_tx_fifo_size_08 -1
++ #define default_param_tx_fifo_size_09 -1
++ #define default_param_tx_fifo_size_10 -1
++ #define default_param_tx_fifo_size_11 -1
++ #define default_param_tx_fifo_size_12 -1
++ #define default_param_tx_fifo_size_13 -1
++ #define default_param_tx_fifo_size_14 -1
++ #define default_param_tx_fifo_size_15 -1
++ #define default_param_dma_unalgned_tx -1
++ #define default_param_dma_unalgned_rx -1
++ #define default_param_thr_ctl -1
++ #define default_param_tx_thr_length -1
++ #define default_param_rx_thr_length -1
++ #endif //__IS_DEVICE__
++ #else // __IS_VR9__
++ #error "Please choose one platform!!"
++ #endif // __IS_VR9__
++#endif //UEIP
++
++/*@}*//*IFXUSB_PLATEFORM_MEM_ADDR*/
++
++/////////////////////////////////////////////////////////////////////////
++
++#ifdef __IS_HOST__
++ #ifdef CONFIG_USB_HOST_IFX_FORCE_USB11
++ #undef default_param_speed
++ #define default_param_speed IFXUSB_PARAM_SPEED_FULL
++ #endif
++#endif
++#ifdef __IS_DEVICE__
++ #ifndef CONFIG_USB_GADGET_DUALSPEED
++ #undef default_param_speed
++ #define default_param_speed IFXUSB_PARAM_SPEED_FULL
++ #endif
++#endif
++
++/////////////////////////////////////////////////////////////////////////
++
++static __inline__ void UDELAY( const uint32_t _usecs )
++{
++ udelay( _usecs );
++}
++
++static __inline__ void MDELAY( const uint32_t _msecs )
++{
++ mdelay( _msecs );
++}
++
++static __inline__ void SPIN_LOCK( spinlock_t *_lock )
++{
++ spin_lock(_lock);
++}
++
++static __inline__ void SPIN_UNLOCK( spinlock_t *_lock )
++{
++ spin_unlock(_lock);
++}
++
++#define SPIN_LOCK_IRQSAVE( _l, _f ) \
++ { \
++ spin_lock_irqsave(_l,_f); \
++ }
++
++#define SPIN_UNLOCK_IRQRESTORE( _l,_f ) \
++ { \
++ spin_unlock_irqrestore(_l,_f); \
++ }
++
++/////////////////////////////////////////////////////////////////////////
++/*!
++ \addtogroup IFXUSB_DBG_ROUTINE
++ */
++/*@{*/
++#ifdef __IS_HOST__
++ extern uint32_t h_dbg_lvl;
++#endif
++
++#ifdef __IS_DEVICE__
++ extern uint32_t d_dbg_lvl;
++#endif
++
++/*! \brief When debug level has the DBG_CIL bit set, display CIL Debug messages. */
++#define DBG_CIL (0x2)
++/*! \brief When debug level has the DBG_CILV bit set, display CIL Verbose debug messages */
++#define DBG_CILV (0x20)
++/*! \brief When debug level has the DBG_PCD bit set, display PCD (Device) debug messages */
++#define DBG_PCD (0x4)
++/*! \brief When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug messages */
++#define DBG_PCDV (0x40)
++/*! \brief When debug level has the DBG_HCD bit set, display Host debug messages */
++#define DBG_HCD (0x8)
++/*! \brief When debug level has the DBG_HCDV bit set, display Verbose Host debug messages */
++#define DBG_HCDV (0x80)
++/*! \brief When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host mode. */
++#define DBG_HCD_URB (0x800)
++/*! \brief When debug level has any bit set, display debug messages */
++#define DBG_ANY (0xFF)
++/*! \brief All debug messages off */
++#define DBG_OFF 0
++
++#define DBG_ENTRY (0x8000)
++
++#define IFXUSB "IFXUSB: "
++
++/*!
++ \fn inline uint32_t SET_DEBUG_LEVEL( const uint32_t _new )
++ \brief Set the Debug Level variable.
++ \param _new 32-bit mask of debug level.
++ \return previous debug level
++ */
++static inline uint32_t SET_DEBUG_LEVEL( const uint32_t _new )
++{
++ #ifdef __IS_HOST__
++ uint32_t old = h_dbg_lvl;
++ h_dbg_lvl = _new;
++ #endif
++
++ #ifdef __IS_DEVICE__
++ uint32_t old = d_dbg_lvl;
++ d_dbg_lvl = _new;
++ #endif
++ return old;
++}
++
++#ifdef __DEBUG__
++ #ifdef __IS_HOST__
++ # define IFX_DEBUGPL(lvl, x...) do{ if ((lvl)&h_dbg_lvl)printk( KERN_DEBUG IFXUSB x ); }while(0)
++ # define CHK_DEBUG_LEVEL(level) ((level) & h_dbg_lvl)
++ #endif
++
++ #ifdef __IS_DEVICE__
++ # define IFX_DEBUGPL(lvl, x...) do{ if ((lvl)&d_dbg_lvl)printk( KERN_DEBUG IFXUSB x ); }while(0)
++ # define CHK_DEBUG_LEVEL(level) ((level) & d_dbg_lvl)
++ #endif
++
++ # define IFX_DEBUGP(x...) IFX_DEBUGPL(DBG_ANY, x )
++#else
++ # define IFX_DEBUGPL(lvl, x...) do{}while(0)
++ # define IFX_DEBUGP(x...)
++ # define CHK_DEBUG_LEVEL(level) (0)
++#endif //__DEBUG__
++
++/* Print an Error message. */
++#define IFX_ERROR(x...) printk( KERN_ERR IFXUSB x )
++/* Print a Warning message. */
++#define IFX_WARN(x...) printk( KERN_WARNING IFXUSB x )
++/* Print a notice (normal but significant message). */
++#define IFX_NOTICE(x...) printk( KERN_NOTICE IFXUSB x )
++/* Basic message printing. */
++#define IFX_PRINT(x...) printk( KERN_INFO IFXUSB x )
++
++/*@}*//*IFXUSB_DBG_ROUTINE*/
++
++
++#endif //__IFXUSB_PLAT_H__
++
+diff --git a/drivers/usb/ifxhcd/ifxusb_regs.h b/drivers/usb/ifxhcd/ifxusb_regs.h
+new file mode 100644
+index 0000000..014c6db
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxusb_regs.h
+@@ -0,0 +1,1420 @@
++/*****************************************************************************
++ ** FILE NAME : ifxusb_regs.h
++ ** PROJECT : IFX USB sub-system V3
++ ** MODULES : IFX USB sub-system Host and Device driver
++ ** SRC VERSION : 1.0
++ ** DATE : 1/Jan/2009
++ ** AUTHOR : Chen, Howard
++ ** DESCRIPTION : This file contains the data structures for accessing the IFXUSB core
++ ** registers.
++ ** The application interfaces with the USB core by reading from and
++ ** writing to the Control and Status Register (CSR) space through the
++ ** AHB Slave interface. These registers are 32 bits wide, and the
++ ** addresses are 32-bit-block aligned.
++ ** CSRs are classified as follows:
++ ** - Core Global Registers
++ ** - Device Mode Registers
++ ** - Device Global Registers
++ ** - Device Endpoint Specific Registers
++ ** - Host Mode Registers
++ ** - Host Global Registers
++ ** - Host Port CSRs
++ ** - Host Channel Specific Registers
++ **
++ ** Only the Core Global registers can be accessed in both Device and
++ ** Host modes. When the USB core is operating in one mode, either
++ ** Device or Host, the application must not access registers from the
++ ** other mode. When the core switches from one mode to another, the
++ ** registers in the new mode of operation must be reprogrammed as they
++ ** would be after a power-on reset.
++ ** FUNCTIONS :
++ ** COMPILER : gcc
++ ** REFERENCE : Synopsys DWC-OTG Driver 2.7
++ ** COPYRIGHT :
++ ** Version Control Section **
++ ** $Author$
++ ** $Date$
++ ** $Revisions$
++ ** $Log$ Revision history
++*****************************************************************************/
++
++
++
++/*!
++ \defgroup IFXUSB_CSR_DEFINITION Control and Status Register bit-map definition
++ \ingroup IFXUSB_DRIVER_V3
++ \brief Data structures for accessing the IFXUSB core registers.
++ The application interfaces with the USB core by reading from and
++ writing to the Control and Status Register (CSR) space through the
++ AHB Slave interface. These registers are 32 bits wide, and the
++ addresses are 32-bit-block aligned.
++ CSRs are classified as follows:
++ - Core Global Registers
++ - Device Mode Registers
++ - Device Global Registers
++ - Device Endpoint Specific Registers
++ - Host Mode Registers
++ - Host Global Registers
++ - Host Port CSRs
++ - Host Channel Specific Registers
++
++ Only the Core Global registers can be accessed in both Device andHost modes.
++ When the USB core is operating in one mode, either Device or Host, the
++ application must not access registers from the other mode. When the core
++ switches from one mode to another, the registers in the new mode of operation
++ must be reprogrammed as they would be after a power-on reset.
++ */
++
++/*!
++ \defgroup IFXUSB_CSR_DEVICE_GLOBAL_REG Device Mode Registers
++ \ingroup IFXUSB_CSR_DEFINITION
++ \brief Bit-mapped structure to access Device Mode Global Registers
++ */
++
++/*!
++ \defgroup IFXUSB_CSR_DEVICE_EP_REG Device Mode EP Registers
++ \ingroup IFXUSB_CSR_DEFINITION
++ \brief Bit-mapped structure to access Device Mode EP Registers
++ There will be one set of endpoint registers per logical endpoint
++ implemented.
++ These registers are visible only in Device mode and must not be
++ accessed in Host mode, as the results are unknown.
++ */
++
++/*!
++ \defgroup IFXUSB_CSR_DEVICE_DMA_DESC Device mode scatter dma descriptor strusture
++ \ingroup IFXUSB_CSR_DEFINITION
++ \brief Bit-mapped structure to DMA descriptor
++ */
++
++
++/*!
++ \defgroup IFXUSB_CSR_HOST_GLOBAL_REG Host Mode Registers
++ \ingroup IFXUSB_CSR_DEFINITION
++ \brief Bit-mapped structure to access Host Mode Global Registers
++ */
++
++/*!
++ \defgroup IFXUSB_CSR_HOST_HC_REG Host Mode HC Registers
++ \ingroup IFXUSB_CSR_DEFINITION
++ \brief Bit-mapped structure to access Host Mode Host Channel Registers
++ There will be one set of endpoint registers per host channel
++ implemented.
++ These registers are visible only in Host mode and must not be
++ accessed in Device mode, as the results are unknown.
++ */
++
++/*!
++ \defgroup IFXUSB_CSR_PWR_CLK_GATING_REG Power and Clock Gating Control Register
++ \ingroup IFXUSB_CSR_DEFINITION
++ \brief Bit-mapped structure to Power and Clock Gating Control Register
++ */
++
++
++
++
++
++
++
++
++/*!
++ \defgroup IFXUSB_CSR_CORE_GLOBAL_REG Core Global Registers
++ \ingroup IFXUSB_CSR_DEFINITION
++ \brief Bit-mapped structure to access Core Global Registers
++ */
++/*!
++ \defgroup IFXUSB_CSR_CORE_GLOBAL_REG Core Global Registers
++ \ingroup IFXUSB_CSR_DEFINITION
++ \brief Bit-mapped structure to access Core Global Registers
++ */
++
++
++
++
++
++
++
++
++
++/*!
++ \file ifxusb_regs.h
++ \ingroup IFXUSB_DRIVER_V3
++ \brief This file contains the data structures for accessing the IFXUSB core registers.
++ */
++
++
++#ifndef __IFXUSB_REGS_H__
++#define __IFXUSB_REGS_H__
++
++/****************************************************************************/
++
++#define MAX_PERIO_FIFOS 15 /** Maximum number of Periodic FIFOs */
++#define MAX_TX_FIFOS 15 /** Maximum number of Periodic FIFOs */
++#define MAX_EPS_CHANNELS 16 /** Maximum number of Endpoints/HostChannels */
++
++/****************************************************************************/
++
++/*!
++ \addtogroup IFXUSB_CSR_ACCESS_MACROS
++ */
++/*@{*/
++
++//#define RecordRegRW
++
++/*!
++ \fn static __inline__ uint32_t ifxusb_rreg( volatile uint32_t *_reg)
++ \brief Reads the content of a register.
++ \param _reg address of register to read.
++ \return contents of the register.
++ */
++static __inline__ uint32_t ifxusb_rreg( volatile uint32_t *_reg)
++{
++ #ifdef RecordRegRW
++ uint32_t r;
++ r=*(_reg);
++ return (r);
++ #else
++ return (*(_reg));
++ #endif
++};
++
++
++/*!
++ \fn static __inline__ void ifxusb_wreg( volatile uint32_t *_reg, const uint32_t _value)
++ \brief Writes a register with a 32 bit value.
++ \param _reg address of register to write.
++ \param _value value to write to _reg.
++ */
++static __inline__ void ifxusb_wreg( volatile uint32_t *_reg, const uint32_t _value)
++{
++ #ifdef RecordRegRW
++ printk(KERN_INFO "[W %p<-%08X]\n",_reg,_value);
++ #else
++ *(_reg)=_value;
++ #endif
++};
++
++/*!
++ \fn static __inline__ void ifxusb_mreg( volatile uint32_t *_reg, const uint32_t _clear_mask, const uint32_t _set_mask)
++ \brief Modifies bit values in a register. Using the
++ algorithm: (reg_contents & ~clear_mask) | set_mask.
++ \param _reg address of register to modify.
++ \param _clear_mask bit mask to be cleared.
++ \param _set_mask bit mask to be set.
++ */
++static __inline__ void ifxusb_mreg( volatile uint32_t *_reg, const uint32_t _clear_mask, const uint32_t _set_mask)
++{
++ uint32_t v;
++ #ifdef RecordRegRW
++ uint32_t r;
++ v= *(_reg);
++ r=v;
++ r&=(~_clear_mask);
++ r|= _set_mask;
++ *(_reg)=r ;
++ printk(KERN_INFO "[M %p->%08X+%08X/%08X<-%08X]\n",_reg,r,_clear_mask,_set_mask,r);
++ #else
++ v= *(_reg);
++ v&=(~_clear_mask);
++ v|= _set_mask;
++ *(_reg)=v ;
++ #endif
++};
++
++/*@}*//*IFXUSB_CSR_ACCESS_MACROS*/
++/****************************************************************************/
++
++/*!
++ \addtogroup IFXUSB_CSR_CORE_GLOBAL_REG
++ */
++/*@{*/
++
++/*!
++ \struct ifxusb_core_global_regs
++ \brief IFXUSB Core registers .
++ The ifxusb_core_global_regs structure defines the size
++ and relative field offsets for the Core Global registers.
++ */
++typedef struct ifxusb_core_global_regs
++{
++ volatile uint32_t gotgctl; /*!< 000h OTG Control and Status Register. */
++ volatile uint32_t gotgint; /*!< 004h OTG Interrupt Register. */
++ volatile uint32_t gahbcfg; /*!< 008h Core AHB Configuration Register. */
++ volatile uint32_t gusbcfg; /*!< 00Ch Core USB Configuration Register. */
++ volatile uint32_t grstctl; /*!< 010h Core Reset Register. */
++ volatile uint32_t gintsts; /*!< 014h Core Interrupt Register. */
++ volatile uint32_t gintmsk; /*!< 018h Core Interrupt Mask Register. */
++ volatile uint32_t grxstsr; /*!< 01Ch Receive Status Queue Read Register (Read Only). */
++ volatile uint32_t grxstsp; /*!< 020h Receive Status Queue Read & POP Register (Read Only). */
++ volatile uint32_t grxfsiz; /*!< 024h Receive FIFO Size Register. */
++ volatile uint32_t gnptxfsiz; /*!< 028h Non Periodic Transmit FIFO Size Register. */
++ volatile uint32_t gnptxsts; /*!< 02Ch Non Periodic Transmit FIFO/Queue Status Register (Read Only). */
++ volatile uint32_t gi2cctl; /*!< 030h I2C Access Register. */
++ volatile uint32_t gpvndctl; /*!< 034h PHY Vendor Control Register. */
++ volatile uint32_t ggpio; /*!< 038h General Purpose Input/Output Register. */
++ volatile uint32_t guid; /*!< 03Ch User ID Register. */
++ volatile uint32_t gsnpsid; /*!< 040h Synopsys ID Register (Read Only). */
++ volatile uint32_t ghwcfg1; /*!< 044h User HW Config1 Register (Read Only). */
++ volatile uint32_t ghwcfg2; /*!< 048h User HW Config2 Register (Read Only). */
++ volatile uint32_t ghwcfg3; /*!< 04Ch User HW Config3 Register (Read Only). */
++ volatile uint32_t ghwcfg4; /*!< 050h User HW Config4 Register (Read Only). */
++ volatile uint32_t reserved[43]; /*!< 054h Reserved 054h-0FFh */
++ volatile uint32_t hptxfsiz; /*!< 100h Host Periodic Transmit FIFO Size Register. */
++ volatile uint32_t dptxfsiz_dieptxf[15];/*!< 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15.
++ Device Periodic Transmit FIFO#n Register if dedicated
++ fifos are disabled, otherwise Device Transmit FIFO#n
++ Register.
++ */
++} ifxusb_core_global_regs_t;
++
++/*!
++ \brief Bits of the Core OTG Control and Status Register (GOTGCTL).
++ */
++typedef union gotgctl_data
++{
++ uint32_t d32;
++ struct{
++ unsigned reserved21_31 : 11;
++ unsigned currmod : 1 ; /*!< 20 */
++ unsigned bsesvld : 1 ; /*!< 19 */
++ unsigned asesvld : 1 ; /*!< 18 */
++ unsigned reserved17 : 1 ;
++ unsigned conidsts : 1 ; /*!< 16 */
++ unsigned reserved12_15 : 4 ;
++ unsigned devhnpen : 1 ; /*!< 11 */
++ unsigned hstsethnpen : 1 ; /*!< 10 */
++ unsigned hnpreq : 1 ; /*!< 09 */
++ unsigned hstnegscs : 1 ; /*!< 08 */
++ unsigned reserved2_7 : 6 ;
++ unsigned sesreq : 1 ; /*!< 01 */
++ unsigned sesreqscs : 1 ; /*!< 00 */
++ } b;
++} gotgctl_data_t;
++
++/*!
++ \brief Bit fields of the Core OTG Interrupt Register (GOTGINT).
++ */
++typedef union gotgint_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned reserved31_20 : 12;
++ unsigned debdone : 1 ; /*!< 19 Debounce Done */
++ unsigned adevtoutchng : 1 ; /*!< 18 A-Device Timeout Change */
++ unsigned hstnegdet : 1 ; /*!< 17 Host Negotiation Detected */
++ unsigned reserver10_16 : 7 ;
++ unsigned hstnegsucstschng : 1 ; /*!< 09 Host Negotiation Success Status Change */
++ unsigned sesreqsucstschng : 1 ; /*!< 08 Session Request Success Status Change */
++ unsigned reserved3_7 : 5 ;
++ unsigned sesenddet : 1 ; /*!< 02 Session End Detected */
++ unsigned reserved0_1 : 2 ;
++ } b;
++} gotgint_data_t;
++
++/*!
++ \brief Bit fields of the Core AHB Configuration Register (GAHBCFG).
++ */
++typedef union gahbcfg_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned reserved9_31 : 23;
++ unsigned ptxfemplvl : 1 ; /*!< 08 Periodic FIFO empty level trigger condition*/
++ unsigned nptxfemplvl : 1 ; /*!< 07 Non-Periodic FIFO empty level trigger condition*/
++ #define IFXUSB_GAHBCFG_TXFEMPTYLVL_EMPTY 1
++ #define IFXUSB_GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0
++ unsigned reserved : 1 ;
++ unsigned dmaenable : 1 ; /*!< 05 DMA enable*/
++ #define IFXUSB_GAHBCFG_DMAENABLE 1
++ unsigned hburstlen : 4 ; /*!< 01-04 DMA Burst-length*/
++ #define IFXUSB_GAHBCFG_INT_DMA_BURST_SINGLE 0
++ #define IFXUSB_GAHBCFG_INT_DMA_BURST_INCR 1
++ #define IFXUSB_GAHBCFG_INT_DMA_BURST_INCR4 3
++ #define IFXUSB_GAHBCFG_INT_DMA_BURST_INCR8 5
++ #define IFXUSB_GAHBCFG_INT_DMA_BURST_INCR16 7
++ unsigned glblintrmsk : 1 ; /*!< 00 USB Global Interrupt Enable */
++ #define IFXUSB_GAHBCFG_GLBINT_ENABLE 1
++ } b;
++} gahbcfg_data_t;
++
++/*!
++ \brief Bit fields of the Core USB Configuration Register (GUSBCFG).
++*/
++typedef union gusbcfg_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned reserved31 : 1;
++ unsigned ForceDevMode : 1; /*!< 30 Force Device Mode */
++ unsigned ForceHstMode : 1; /*!< 29 Force Host Mode */
++ unsigned TxEndDelay : 1; /*!< 28 Tx End Delay */
++ unsigned reserved2723 : 5;
++ unsigned term_sel_dl_pulse : 1; /*!< 22 TermSel DLine Pulsing Selection */
++ unsigned reserved2117 : 5;
++ unsigned otgutmifssel : 1; /*!< 16 UTMIFS Select */
++ unsigned phylpwrclksel : 1; /*!< 15 PHY Low-Power Clock Select */
++ unsigned reserved14 : 1;
++ unsigned usbtrdtim : 4; /*!< 13-10 USB Turnaround Time */
++ unsigned hnpcap : 1; /*!< 09 HNP-Capable */
++ unsigned srpcap : 1; /*!< 08 SRP-Capable */
++ unsigned reserved07 : 1;
++ unsigned physel : 1; /*!< 06 USB 2.0 High-Speed PHY or
++ USB 1.1 Full-Speed Serial
++ Transceiver Select */
++ unsigned fsintf : 1; /*!< 05 Full-Speed Serial Interface Select */
++ unsigned ulpi_utmi_sel : 1; /*!< 04 ULPI or UTMI+ Select */
++ unsigned phyif : 1; /*!< 03 PHY Interface */
++ unsigned toutcal : 3; /*!< 00-02 HS/FS Timeout Calibration */
++ }b;
++} gusbcfg_data_t;
++
++/*!
++ \brief Bit fields of the Core Reset Register (GRSTCTL).
++ */
++typedef union grstctl_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned ahbidle : 1; /*!< 31 AHB Master Idle. Indicates the AHB Master State
++ Machine is in IDLE condition. */
++ unsigned dmareq : 1; /*!< 30 DMA Request Signal. Indicated DMA request is in
++ probress. Used for debug purpose. */
++ unsigned reserved11_29 :19;
++ unsigned txfnum : 5; /*!< 10-06 TxFIFO Number (TxFNum) to be flushed.
++ 0x00: Non Periodic TxFIFO Flush or TxFIFO 0
++ 0x01-0x0F: Periodic TxFIFO Flush or TxFIFO n
++ 0x10: Flush all TxFIFO
++ */
++ unsigned txfflsh : 1; /*!< 05 TxFIFO Flush */
++ unsigned rxfflsh : 1; /*!< 04 RxFIFO Flush */
++ unsigned intknqflsh : 1; /*!< 03 In Token Sequence Learning Queue Flush (Device Only) */
++ unsigned hstfrm : 1; /*!< 02 Host Frame Counter Reset (Host Only) */
++ unsigned hsftrst : 1; /*!< 01 Hclk Soft Reset */
++
++ unsigned csftrst : 1; /*!< 00 Core Soft Reset
++ The application can flush the control logic in the
++ entire core using this bit. This bit resets the
++ pipelines in the AHB Clock domain as well as the
++ PHY Clock domain.
++ The state machines are reset to an IDLE state, the
++ control bits in the CSRs are cleared, all the
++ transmit FIFOs and the receive FIFO are flushed.
++ The status mask bits that control the generation of
++ the interrupt, are cleared, to clear the
++ interrupt. The interrupt status bits are not
++ cleared, so the application can get the status of
++ any events that occurred in the core after it has
++ set this bit.
++ Any transactions on the AHB are terminated as soon
++ as possible following the protocol. Any
++ transactions on the USB are terminated immediately.
++ The configuration settings in the CSRs are
++ unchanged, so the software doesn't have to
++ reprogram these registers (Device
++ Configuration/Host Configuration/Core System
++ Configuration/Core PHY Configuration).
++ The application can write to this bit, any time it
++ wants to reset the core. This is a self clearing
++ bit and the core clears this bit after all the
++ necessary logic is reset in the core, which may
++ take several clocks, depending on the current state
++ of the core.
++ */
++ }b;
++} grstctl_t;
++
++/*!
++ \brief Bit fields of the Core Interrupt Mask Register (GINTMSK) and
++ Core Interrupt Register (GINTSTS).
++ */
++typedef union gint_data
++{
++ uint32_t d32;
++ #define IFXUSB_SOF_INTR_MASK 0x0008
++ struct
++ {
++ unsigned wkupintr : 1; /*!< 31 Resume/Remote Wakeup Detected Interrupt */
++ unsigned sessreqintr : 1; /*!< 30 Session Request/New Session Detected Interrupt */
++ unsigned disconnect : 1; /*!< 29 Disconnect Detected Interrupt */
++ unsigned conidstschng : 1; /*!< 28 Connector ID Status Change */
++ unsigned reserved27 : 1;
++ unsigned ptxfempty : 1; /*!< 26 Periodic TxFIFO Empty */
++ unsigned hcintr : 1; /*!< 25 Host Channels Interrupt */
++ unsigned portintr : 1; /*!< 24 Host Port Interrupt */
++ unsigned reserved23 : 1;
++ unsigned fetsuspmsk : 1; /*!< 22 Data Fetch Suspended */
++ unsigned incomplisoout : 1; /*!< 21 Incomplete IsochronousOUT/Period Transfer */
++ unsigned incomplisoin : 1; /*!< 20 Incomplete Isochronous IN Transfer */
++ unsigned outepintr : 1; /*!< 19 OUT Endpoints Interrupt */
++ unsigned inepintr : 1; /*!< 18 IN Endpoints Interrupt */
++ unsigned epmismatch : 1; /*!< 17 Endpoint Mismatch Interrupt */
++ unsigned reserved16 : 1;
++ unsigned eopframe : 1; /*!< 15 End of Periodic Frame Interrupt */
++ unsigned isooutdrop : 1; /*!< 14 Isochronous OUT Packet Dropped Interrupt */
++ unsigned enumdone : 1; /*!< 13 Enumeration Done */
++ unsigned usbreset : 1; /*!< 12 USB Reset */
++ unsigned usbsuspend : 1; /*!< 11 USB Suspend */
++ unsigned erlysuspend : 1; /*!< 10 Early Suspend */
++ unsigned i2cintr : 1; /*!< 09 I2C Interrupt */
++ unsigned reserved8 : 1;
++ unsigned goutnakeff : 1; /*!< 07 Global OUT NAK Effective */
++ unsigned ginnakeff : 1; /*!< 06 Global Non-periodic IN NAK Effective */
++ unsigned nptxfempty : 1; /*!< 05 Non-periodic TxFIFO Empty */
++ unsigned rxstsqlvl : 1; /*!< 04 Receive FIFO Non-Empty */
++ unsigned sofintr : 1; /*!< 03 Start of (u)Frame */
++ unsigned otgintr : 1; /*!< 02 OTG Interrupt */
++ unsigned modemismatch : 1; /*!< 01 Mode Mismatch Interrupt */
++ unsigned reserved0 : 1;
++ } b;
++} gint_data_t;
++
++/*!
++ \brief Bit fields in the Receive Status Read and Pop Registers (GRXSTSR, GRXSTSP)
++ */
++typedef union grxsts_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned reserved : 7;
++ unsigned fn : 4; /*!< 24-21 Frame Number */
++ unsigned pktsts : 4; /*!< 20-17 Packet Status */
++ #define IFXUSB_DSTS_DATA_UPDT 0x2 // OUT Data Packet
++ #define IFXUSB_DSTS_XFER_COMP 0x3 // OUT Data Transfer Complete
++ #define IFXUSB_DSTS_GOUT_NAK 0x1 // Global OUT NAK
++ #define IFXUSB_DSTS_SETUP_COMP 0x4 // Setup Phase Complete
++ #define IFXUSB_DSTS_SETUP_UPDT 0x6 // SETUP Packet
++ unsigned dpid : 2; /*!< 16-15 Data PID */
++ unsigned bcnt :11; /*!< 14-04 Byte Count */
++ unsigned epnum : 4; /*!< 03-00 Endpoint Number */
++ } db;
++ struct
++ {
++ unsigned reserved :11;
++ unsigned pktsts : 4; /*!< 20-17 Packet Status */
++ #define IFXUSB_HSTS_DATA_UPDT 0x2 // OUT Data Packet
++ #define IFXUSB_HSTS_XFER_COMP 0x3 // OUT Data Transfer Complete
++ #define IFXUSB_HSTS_DATA_TOGGLE_ERR 0x5 // DATA TOGGLE Error
++ #define IFXUSB_HSTS_CH_HALTED 0x7 // Channel Halted
++ unsigned dpid : 2; /*!< 16-15 Data PID */
++ unsigned bcnt :11; /*!< 14-04 Byte Count */
++ unsigned chnum : 4; /*!< 03-00 Channel Number */
++ } hb;
++} grxsts_data_t;
++
++/*!
++ \brief Bit fields in the FIFO Size Registers (HPTXFSIZ, GNPTXFSIZ, DPTXFSIZn).
++ */
++typedef union fifosize_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned depth : 16; /*!< 31-16 TxFIFO Depth (in DWord)*/
++ unsigned startaddr : 16; /*!< 15-00 RAM Starting address */
++ } b;
++} fifosize_data_t;
++
++/*!
++ \brief Bit fields in the Non-Periodic Transmit FIFO/Queue Status Register (GNPTXSTS).
++ */
++
++typedef union gnptxsts_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned reserved : 1;
++ unsigned nptxqtop_chnep : 4; /*!< 30-27 Channel/EP Number of top of the Non-Periodic
++ Transmit Request Queue
++ */
++ unsigned nptxqtop_token : 2; /*!< 26-25 Token Type top of the Non-Periodic
++ Transmit Request Queue
++ 0 - IN/OUT
++ 1 - Zero Length OUT
++ 2 - PING/Complete Split
++ 3 - Channel Halt
++ */
++ unsigned nptxqtop_terminate : 1; /*!< 24 Terminate (Last entry for the selected
++ channel/EP)*/
++ unsigned nptxqspcavail : 8; /*!< 23-16 Transmit Request Queue Space Available */
++ unsigned nptxfspcavail :16; /*!< 15-00 TxFIFO Space Avail (in DWord)*/
++ }b;
++} gnptxsts_data_t;
++
++
++/*!
++ \brief Bit fields in the Transmit FIFO Status Register (DTXFSTS).
++ */
++typedef union dtxfsts_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned reserved : 16;
++ unsigned txfspcavail : 16; /*!< 15-00 TxFIFO Space Avail (in DWord)*/
++ }b;
++} dtxfsts_data_t;
++
++
++/*!
++ \brief Bit fields in the I2C Control Register (I2CCTL).
++ */
++typedef union gi2cctl_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned bsydne : 1; /*!< 31 I2C Busy/Done*/
++ unsigned rw : 1; /*!< 30 Read/Write Indicator */
++ unsigned reserved : 2;
++ unsigned i2cdevaddr : 2; /*!< 27-26 I2C Device Address */
++ unsigned i2csuspctl : 1; /*!< 25 I2C Suspend Control */
++ unsigned ack : 1; /*!< 24 I2C ACK */
++ unsigned i2cen : 1; /*!< 23 I2C Enable */
++ unsigned addr : 7; /*!< 22-16 I2C Address */
++ unsigned regaddr : 8; /*!< 15-08 I2C Register Addr */
++ unsigned rwdata : 8; /*!< I2C Read/Write Data */
++ } b;
++} gi2cctl_data_t;
++
++
++/*!
++ \brief Bit fields in the User HW Config1 Register.
++ */
++typedef union hwcfg1_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned ep_dir15 : 2; /*!< Direction of each EP
++ 0: BIDIR (IN and OUT) endpoint
++ 1: IN endpoint
++ 2: OUT endpoint
++ 3: Reserved
++ */
++ unsigned ep_dir14 : 2;
++ unsigned ep_dir13 : 2;
++ unsigned ep_dir12 : 2;
++ unsigned ep_dir11 : 2;
++ unsigned ep_dir10 : 2;
++ unsigned ep_dir09 : 2;
++ unsigned ep_dir08 : 2;
++ unsigned ep_dir07 : 2;
++ unsigned ep_dir06 : 2;
++ unsigned ep_dir05 : 2;
++ unsigned ep_dir04 : 2;
++ unsigned ep_dir03 : 2;
++ unsigned ep_dir02 : 2;
++ unsigned ep_dir01 : 2;
++ unsigned ep_dir00 : 2;
++ }b;
++} hwcfg1_data_t;
++
++/*!
++ \brief Bit fields in the User HW Config2 Register.
++ */
++typedef union hwcfg2_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned reserved31 : 1;
++ unsigned dev_token_q_depth : 5; /*!< 30-26 Device Mode IN Token Sequence Learning Queue Depth */
++ unsigned host_perio_tx_q_depth : 2; /*!< 25-24 Host Mode Periodic Request Queue Depth */
++ unsigned nonperio_tx_q_depth : 2; /*!< 23-22 Non-periodic Request Queue Depth */
++ unsigned rx_status_q_depth : 2; /*!< 21-20 Multi Processor Interrupt Enabled */
++ unsigned dynamic_fifo : 1; /*!< 19 Dynamic FIFO Sizing Enabled */
++ unsigned perio_ep_supported : 1; /*!< 18 Periodic OUT Channels Supported in Host Mode */
++ unsigned num_host_chan : 4; /*!< 17-14 Number of Host Channels */
++ unsigned num_dev_ep : 4; /*!< 13-10 Number of Device Endpoints */
++ unsigned fs_phy_type : 2; /*!< 09-08 Full-Speed PHY Interface Type */
++ #define IFXUSB_HWCFG2_FS_PHY_TYPE_NOT_SUPPORTED 0
++ #define IFXUSB_HWCFG2_FS_PHY_TYPE_DEDICATE 1
++ #define IFXUSB_HWCFG2_FS_PHY_TYPE_UTMI 2
++ #define IFXUSB_HWCFG2_FS_PHY_TYPE_ULPI 3
++ unsigned hs_phy_type : 2; /*!< 07-06 High-Speed PHY Interface Type */
++ #define IFXUSB_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0
++ #define IFXUSB_HWCFG2_HS_PHY_TYPE_UTMI 1
++ #define IFXUSB_HWCFG2_HS_PHY_TYPE_ULPI 2
++ #define IFXUSB_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3
++ unsigned point2point : 1; /*!< 05 Point-to-Point */
++ unsigned architecture : 2; /*!< 04-03 Architecture */
++ #define IFXUSB_HWCFG2_ARCH_SLAVE_ONLY 0
++ #define IFXUSB_HWCFG2_ARCH_EXT_DMA 1
++ #define IFXUSB_HWCFG2_ARCH_INT_DMA 2
++ unsigned op_mode : 3; /*!< 02-00 Mode of Operation */
++ #define IFXUSB_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0
++ #define IFXUSB_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1
++ #define IFXUSB_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2
++ #define IFXUSB_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3
++ #define IFXUSB_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4
++ #define IFXUSB_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5
++ #define IFXUSB_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6
++ } b;
++} hwcfg2_data_t;
++
++/*!
++ \brief Bit fields in the User HW Config3 Register.
++ */
++typedef union hwcfg3_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned dfifo_depth :16; /*!< 31-16 DFIFO Depth */
++ unsigned reserved15_12 : 4;
++ unsigned synch_reset_type : 1; /*!< 11 Reset Style for Clocked always Blocks in RTL */
++ unsigned optional_features : 1; /*!< 10 Optional Features Removed */
++ unsigned vendor_ctrl_if : 1; /*!< 09 Vendor Control Interface Support */
++ unsigned i2c : 1; /*!< 08 I2C Selection */
++ unsigned otg_func : 1; /*!< 07 OTG Function Enabled */
++ unsigned packet_size_cntr_width : 3; /*!< 06-04 Width of Packet Size Counters */
++ unsigned xfer_size_cntr_width : 4; /*!< 03-00 Width of Transfer Size Counters */
++ } b;
++} hwcfg3_data_t;
++
++/*!
++ \brief Bit fields in the User HW Config4
++ * Register. Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg4_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned desc_dma_dyn : 1; /*!< 31 Scatter/Gather DMA */
++ unsigned desc_dma : 1; /*!< 30 Scatter/Gather DMA configuration */
++ unsigned num_in_eps : 4; /*!< 29-26 Number of Device Mode IN Endpoints Including Control Endpoints */
++ unsigned ded_fifo_en : 1; /*!< 25 Enable Dedicated Transmit FIFO for device IN Endpoints */
++ unsigned session_end_filt_en : 1; /*!< 24 session_end Filter Enabled */
++ unsigned b_valid_filt_en : 1; /*!< 23 b_valid Filter Enabled */
++ unsigned a_valid_filt_en : 1; /*!< 22 a_valid Filter Enabled */
++ unsigned vbus_valid_filt_en : 1; /*!< 21 vbus_valid Filter Enabled */
++ unsigned iddig_filt_en : 1; /*!< 20 iddig Filter Enable */
++ unsigned num_dev_mode_ctrl_ep : 4; /*!< 19-16 Number of Device Mode Control Endpoints in Addition to Endpoint 0 */
++ unsigned utmi_phy_data_width : 2; /*!< 15-14 UTMI+ PHY/ULPI-to-Internal UTMI+ Wrapper Data Width */
++ unsigned reserved13_06 : 8;
++ unsigned min_ahb_freq : 1; /*!< 05 Minimum AHB Frequency Less Than 60 MHz */
++ unsigned power_optimiz : 1; /*!< 04 Enable Power Optimization? */
++ unsigned num_dev_perio_in_ep : 4; /*!< 03-00 Number of Device Mode Periodic IN Endpoints */
++ } b;
++} hwcfg4_data_t;
++
++/*@}*//*IFXUSB_CSR_CORE_GLOBAL_REG*/
++
++/****************************************************************************/
++/*!
++ \addtogroup IFXUSB_CSR_DEVICE_GLOBAL_REG
++ */
++/*@{*/
++
++/*!
++ \struct ifxusb_dev_global_regs
++ \brief IFXUSB Device Mode Global registers. Offsets 800h-BFFh
++ The ifxusb_dev_global_regs structure defines the size
++ and relative field offsets for the Device Global registers.
++ These registers are visible only in Device mode and must not be
++ accessed in Host mode, as the results are unknown.
++ */
++typedef struct ifxusb_dev_global_regs
++{
++ volatile uint32_t dcfg; /*!< 800h Device Configuration Register. */
++ volatile uint32_t dctl; /*!< 804h Device Control Register. */
++ volatile uint32_t dsts; /*!< 808h Device Status Register (Read Only). */
++ uint32_t unused;
++ volatile uint32_t diepmsk; /*!< 810h Device IN Endpoint Common Interrupt Mask Register. */
++ volatile uint32_t doepmsk; /*!< 814h Device OUT Endpoint Common Interrupt Mask Register. */
++ volatile uint32_t daint; /*!< 818h Device All Endpoints Interrupt Register. */
++ volatile uint32_t daintmsk; /*!< 81Ch Device All Endpoints Interrupt Mask Register. */
++ volatile uint32_t dtknqr1; /*!< 820h Device IN Token Queue Read Register-1 (Read Only). */
++ volatile uint32_t dtknqr2; /*!< 824h Device IN Token Queue Read Register-2 (Read Only). */
++ volatile uint32_t dvbusdis; /*!< 828h Device VBUS discharge Register.*/
++ volatile uint32_t dvbuspulse; /*!< 82Ch Device VBUS Pulse Register. */
++ volatile uint32_t dtknqr3_dthrctl; /*!< 830h Device IN Token Queue Read Register-3 (Read Only).
++ Device Thresholding control register (Read/Write)
++ */
++ volatile uint32_t dtknqr4_fifoemptymsk; /*!< 834h Device IN Token Queue Read Register-4 (Read Only).
++ Device IN EPs empty Inr. Mask Register (Read/Write)
++ */
++} ifxusb_device_global_regs_t;
++
++/*!
++ \brief Bit fields in the Device Configuration Register.
++ */
++
++typedef union dcfg_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned reserved31_26 : 6;
++ unsigned perschintvl : 2; /*!< 25-24 Periodic Scheduling Interval */
++ unsigned descdma : 1; /*!< 23 Enable Descriptor DMA in Device mode */
++ unsigned epmscnt : 5; /*!< 22-18 In Endpoint Mis-match count */
++ unsigned reserved13_17 : 5;
++ unsigned perfrint : 2; /*!< 12-11 Periodic Frame Interval */
++ #define IFXUSB_DCFG_FRAME_INTERVAL_80 0
++ #define IFXUSB_DCFG_FRAME_INTERVAL_85 1
++ #define IFXUSB_DCFG_FRAME_INTERVAL_90 2
++ #define IFXUSB_DCFG_FRAME_INTERVAL_95 3
++ unsigned devaddr : 7; /*!< 10-04 Device Addresses */
++ unsigned reserved3 : 1;
++ unsigned nzstsouthshk : 1; /*!< 02 Non Zero Length Status OUT Handshake */
++ #define IFXUSB_DCFG_SEND_STALL 1
++ unsigned devspd : 2; /*!< 01-00 Device Speed */
++ } b;
++} dcfg_data_t;
++
++/*!
++ \brief Bit fields in the Device Control Register.
++ */
++typedef union dctl_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned reserved16_31 :16;
++ unsigned ifrmnum : 1; /*!< 15 Ignore Frame Number for ISOC EPs */
++ unsigned gmc : 2; /*!< 14-13 Global Multi Count */
++ unsigned gcontbna : 1; /*!< 12 Global Continue on BNA */
++ unsigned pwronprgdone : 1; /*!< 11 Power-On Programming Done */
++ unsigned cgoutnak : 1; /*!< 10 Clear Global OUT NAK */
++ unsigned sgoutnak : 1; /*!< 09 Set Global OUT NAK */
++ unsigned cgnpinnak : 1; /*!< 08 Clear Global Non-Periodic IN NAK */
++ unsigned sgnpinnak : 1; /*!< 07 Set Global Non-Periodic IN NAK */
++ unsigned tstctl : 3; /*!< 06-04 Test Control */
++ unsigned goutnaksts : 1; /*!< 03 Global OUT NAK Status */
++ unsigned gnpinnaksts : 1; /*!< 02 Global Non-Periodic IN NAK Status */
++ unsigned sftdiscon : 1; /*!< 01 Soft Disconnect */
++ unsigned rmtwkupsig : 1; /*!< 00 Remote Wakeup */
++ } b;
++} dctl_data_t;
++
++
++/*!
++ \brief Bit fields in the Device Status Register.
++ */
++typedef union dsts_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned reserved22_31 :10;
++ unsigned soffn :14; /*!< 21-08 Frame or Microframe Number of the received SOF */
++ unsigned reserved4_7 : 4;
++ unsigned errticerr : 1; /*!< 03 Erratic Error */
++ unsigned enumspd : 2; /*!< 02-01 Enumerated Speed */
++ #define IFXUSB_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0
++ #define IFXUSB_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1
++ #define IFXUSB_DSTS_ENUMSPD_LS_PHY_6MHZ 2
++ #define IFXUSB_DSTS_ENUMSPD_FS_PHY_48MHZ 3
++ unsigned suspsts : 1; /*!< 00 Suspend Status */
++ } b;
++} dsts_data_t;
++
++/*!
++ \brief Bit fields in the Device IN EP Interrupt Register
++ and the Device IN EP Common Mask Register.
++ */
++typedef union diepint_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned reserved14_31 :18;
++ unsigned nakmsk : 1; /*!< 13 NAK interrupt Mask */
++ unsigned reserved10_12 : 3;
++ unsigned bna : 1; /*!< 09 BNA Interrupt mask */
++ unsigned txfifoundrn : 1; /*!< 08 Fifo Underrun Mask */
++ unsigned emptyintr : 1; /*!< 07 IN Endpoint HAK Effective mask */
++ unsigned inepnakeff : 1; /*!< 06 IN Endpoint HAK Effective mask */
++ unsigned intknepmis : 1; /*!< 05 IN Token Received with EP mismatch mask */
++ unsigned intktxfemp : 1; /*!< 04 IN Token received with TxF Empty mask */
++ unsigned timeout : 1; /*!< 03 TimeOUT Handshake mask (non-ISOC EPs) */
++ unsigned ahberr : 1; /*!< 02 AHB Error mask */
++ unsigned epdisabled : 1; /*!< 01 Endpoint disable mask */
++ unsigned xfercompl : 1; /*!< 00 Transfer complete mask */
++ } b;
++} diepint_data_t;
++
++
++/*!
++ \brief Bit fields in the Device OUT EP Interrupt Register and
++ Device OUT EP Common Interrupt Mask Register.
++ */
++typedef union doepint_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned reserved15_31 :17;
++ unsigned nyetmsk : 1; /*!< 14 NYET Interrupt */
++ unsigned nakmsk : 1; /*!< 13 NAK Interrupt */
++ unsigned bbleerrmsk : 1; /*!< 12 Babble Interrupt */
++ unsigned reserved10_11 : 2;
++ unsigned bna : 1; /*!< 09 BNA Interrupt */
++ unsigned outpkterr : 1; /*!< 08 OUT packet Error */
++ unsigned reserved07 : 1;
++ unsigned back2backsetup : 1; /*!< 06 Back-to-Back SETUP Packets Received */
++ unsigned stsphsercvd : 1; /*!< 05 */
++ unsigned outtknepdis : 1; /*!< 04 OUT Token Received when Endpoint Disabled */
++ unsigned setup : 1; /*!< 03 Setup Phase Done (contorl EPs) */
++ unsigned ahberr : 1; /*!< 02 AHB Error */
++ unsigned epdisabled : 1; /*!< 01 Endpoint disable */
++ unsigned xfercompl : 1; /*!< 00 Transfer complete */
++ } b;
++} doepint_data_t;
++
++
++/*!
++ \brief Bit fields in the Device All EP Interrupt Registers.
++ */
++typedef union daint_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned out : 16; /*!< 31-16 OUT Endpoint bits */
++ unsigned in : 16; /*!< 15-00 IN Endpoint bits */
++ } eps;
++ struct
++ {
++ /** OUT Endpoint bits */
++ unsigned outep15 : 1;
++ unsigned outep14 : 1;
++ unsigned outep13 : 1;
++ unsigned outep12 : 1;
++ unsigned outep11 : 1;
++ unsigned outep10 : 1;
++ unsigned outep09 : 1;
++ unsigned outep08 : 1;
++ unsigned outep07 : 1;
++ unsigned outep06 : 1;
++ unsigned outep05 : 1;
++ unsigned outep04 : 1;
++ unsigned outep03 : 1;
++ unsigned outep02 : 1;
++ unsigned outep01 : 1;
++ unsigned outep00 : 1;
++ /** IN Endpoint bits */
++ unsigned inep15 : 1;
++ unsigned inep14 : 1;
++ unsigned inep13 : 1;
++ unsigned inep12 : 1;
++ unsigned inep11 : 1;
++ unsigned inep10 : 1;
++ unsigned inep09 : 1;
++ unsigned inep08 : 1;
++ unsigned inep07 : 1;
++ unsigned inep06 : 1;
++ unsigned inep05 : 1;
++ unsigned inep04 : 1;
++ unsigned inep03 : 1;
++ unsigned inep02 : 1;
++ unsigned inep01 : 1;
++ unsigned inep00 : 1;
++ } ep;
++} daint_data_t;
++
++
++/*!
++ \brief Bit fields in the Device IN Token Queue Read Registers.
++ */
++typedef union dtknq1_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned epnums0_5 :24; /*!< 31-08 EP Numbers of IN Tokens 0 ... 4 */
++ unsigned wrap_bit : 1; /*!< 07 write pointer has wrapped */
++ unsigned reserved05_06 : 2;
++ unsigned intknwptr : 5; /*!< 04-00 In Token Queue Write Pointer */
++ }b;
++} dtknq1_data_t;
++
++
++/*!
++ \brief Bit fields in Threshold control Register
++ */
++typedef union dthrctl_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned reserved26_31 : 6;
++ unsigned rx_thr_len : 9; /*!< 25-17 Rx Thr. Length */
++ unsigned rx_thr_en : 1; /*!< 16 Rx Thr. Enable */
++ unsigned reserved11_15 : 5;
++ unsigned tx_thr_len : 9; /*!< 10-02 Tx Thr. Length */
++ unsigned iso_thr_en : 1; /*!< 01 ISO Tx Thr. Enable */
++ unsigned non_iso_thr_en : 1; /*!< 00 non ISO Tx Thr. Enable */
++ } b;
++} dthrctl_data_t;
++
++/*@}*//*IFXUSB_CSR_DEVICE_GLOBAL_REG*/
++
++/****************************************************************************/
++
++/*!
++ \addtogroup IFXUSB_CSR_DEVICE_EP_REG
++ */
++/*@{*/
++
++/*!
++ \struct ifxusb_dev_in_ep_regs
++ \brief Device Logical IN Endpoint-Specific Registers.
++ There will be one set of endpoint registers per logical endpoint
++ implemented.
++ each EP's IN EP Register are offset at :
++ 900h + * (ep_num * 20h)
++ */
++
++typedef struct ifxusb_dev_in_ep_regs
++{
++ volatile uint32_t diepctl; /*!< 00h: Endpoint Control Register */
++ uint32_t reserved04; /*!< 04h: */
++ volatile uint32_t diepint; /*!< 08h: Endpoint Interrupt Register */
++ uint32_t reserved0C; /*!< 0Ch: */
++ volatile uint32_t dieptsiz; /*!< 10h: Endpoint Transfer Size Register.*/
++ volatile uint32_t diepdma; /*!< 14h: Endpoint DMA Address Register. */
++ volatile uint32_t dtxfsts; /*!< 18h: Endpoint Transmit FIFO Status Register. */
++ volatile uint32_t diepdmab; /*!< 1Ch: Endpoint DMA Buffer Register. */
++} ifxusb_dev_in_ep_regs_t;
++
++/*!
++ \brief Device Logical OUT Endpoint-Specific Registers.
++ There will be one set of endpoint registers per logical endpoint
++ implemented.
++ each EP's OUT EP Register are offset at :
++ B00h + * (ep_num * 20h) + 00h
++ */
++typedef struct ifxusb_dev_out_ep_regs
++{
++ volatile uint32_t doepctl; /*!< 00h: Endpoint Control Register */
++ volatile uint32_t doepfn; /*!< 04h: Endpoint Frame number Register */
++ volatile uint32_t doepint; /*!< 08h: Endpoint Interrupt Register */
++ uint32_t reserved0C; /*!< 0Ch: */
++ volatile uint32_t doeptsiz; /*!< 10h: Endpoint Transfer Size Register.*/
++ volatile uint32_t doepdma; /*!< 14h: Endpoint DMA Address Register. */
++ uint32_t reserved18; /*!< 18h: */
++ volatile uint32_t doepdmab; /*!< 1Ch: Endpoint DMA Buffer Register. */
++} ifxusb_dev_out_ep_regs_t;
++
++
++/*!
++ \brief Bit fields in the Device EP Control
++ Register.
++ */
++typedef union depctl_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned epena : 1; /*!< 31 Endpoint Enable */
++ unsigned epdis : 1; /*!< 30 Endpoint Disable */
++ unsigned setd1pid : 1; /*!< 29 Set DATA1 PID (INTR/Bulk IN and OUT endpoints) */
++ unsigned setd0pid : 1; /*!< 28 Set DATA0 PID (INTR/Bulk IN and OUT endpoints) */
++ unsigned snak : 1; /*!< 27 Set NAK */
++ unsigned cnak : 1; /*!< 26 Clear NAK */
++ unsigned txfnum : 4; /*!< 25-22 Tx Fifo Number */
++ unsigned stall : 1; /*!< 21 Stall Handshake */
++ unsigned snp : 1; /*!< 20 Snoop Mode */
++ unsigned eptype : 2; /*!< 19-18 Endpoint Type
++ 0: Control
++ 1: Isochronous
++ 2: Bulk
++ 3: Interrupt
++ */
++ unsigned naksts : 1; /*!< 17 NAK Status */
++ unsigned dpid : 1; /*!< 16 Endpoint DPID (INTR/Bulk IN and OUT endpoints) */
++ unsigned usbactep : 1; /*!< 15 USB Active Endpoint */
++ unsigned nextep : 4; /*!< 14-11 Next Endpoint */
++ unsigned mps :11; /*!< 10-00 Maximum Packet Size */
++ #define IFXUSB_DEP0CTL_MPS_64 0
++ #define IFXUSB_DEP0CTL_MPS_32 1
++ #define IFXUSB_DEP0CTL_MPS_16 2
++ #define IFXUSB_DEP0CTL_MPS_8 3
++ } b;
++} depctl_data_t;
++
++
++/*!
++ \brief Bit fields in the Device EP Transfer Size Register. (EP0 and EPn)
++ */
++typedef union deptsiz_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned reserved31 : 1;
++ unsigned supcnt : 2; /*!< 30-29 Setup Packet Count */
++ unsigned reserved20_28 : 9;
++ unsigned pktcnt : 1; /*!< 19 Packet Count */
++ unsigned reserved7_18 :12;
++ unsigned xfersize : 7; /*!< 06-00 Transfer size */
++ }b0;
++ struct
++ {
++ unsigned reserved : 1;
++ unsigned mc : 2; /*!< 30-29 Multi Count */
++ unsigned pktcnt :10; /*!< 28-19 Packet Count */
++ unsigned xfersize :19; /*!< 18-00 Transfer size */
++ } b;
++} deptsiz_data_t;
++
++/*@}*//*IFXUSB_CSR_DEVICE_EP_REG*/
++/****************************************************************************/
++
++/*!
++ \addtogroup IFXUSB_CSR_DEVICE_DMA_DESC
++ */
++/*@{*/
++/*!
++ \struct desc_sts_data
++ \brief Bit fields in the DMA Descriptor status quadlet.
++ */
++typedef union desc_sts_data
++{
++ struct
++ {
++ unsigned bs : 2; /*!< 31-30 Buffer Status */
++ #define BS_HOST_READY 0x0
++ #define BS_DMA_BUSY 0x1
++ #define BS_DMA_DONE 0x2
++ #define BS_HOST_BUSY 0x3
++ unsigned sts : 2; /*!< 29-28 Receive/Trasmit Status */
++ #define RTS_SUCCESS 0x0
++ #define RTS_BUFFLUSH 0x1
++ #define RTS_RESERVED 0x2
++ #define RTS_BUFERR 0x3
++ unsigned l : 1; /*!< 27 Last */
++ unsigned sp : 1; /*!< 26 Short Packet */
++ unsigned ioc : 1; /*!< 25 Interrupt On Complete */
++ unsigned sr : 1; /*!< 24 Setup Packet received */
++ unsigned mtrf : 1; /*!< 23 Multiple Transfer */
++ unsigned reserved16_22 : 7;
++ unsigned bytes :16; /*!< 15-00 Transfer size in bytes */
++ } b;
++ uint32_t d32; /*!< DMA Descriptor data buffer pointer */
++} desc_sts_data_t;
++
++/*@}*//*IFXUSB_CSR_DEVICE_DMA_DESC*/
++/****************************************************************************/
++
++/*!
++ \addtogroup IFXUSB_CSR_HOST_GLOBAL_REG
++ */
++/*@{*/
++/*!
++ \struct ifxusb_host_global_regs
++ \brief IFXUSB Host Mode Global registers. Offsets 400h-7FFh
++ The ifxusb_host_global_regs structure defines the size
++ and relative field offsets for the Host Global registers.
++ These registers are visible only in Host mode and must not be
++ accessed in Device mode, as the results are unknown.
++ */
++typedef struct ifxusb_host_global_regs
++{
++ volatile uint32_t hcfg; /*!< 400h Host Configuration Register. */
++ volatile uint32_t hfir; /*!< 404h Host Frame Interval Register. */
++ volatile uint32_t hfnum; /*!< 408h Host Frame Number / Frame Remaining Register. */
++ uint32_t reserved40C;
++ volatile uint32_t hptxsts; /*!< 410h Host Periodic Transmit FIFO/ Queue Status Register. */
++ volatile uint32_t haint; /*!< 414h Host All Channels Interrupt Register. */
++ volatile uint32_t haintmsk; /*!< 418h Host All Channels Interrupt Mask Register. */
++} ifxusb_host_global_regs_t;
++
++/*!
++ \brief Bit fields in the Host Configuration Register.
++ */
++typedef union hcfg_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned reserved31_03 :29;
++ unsigned fslssupp : 1; /*!< 02 FS/LS Only Support */
++ unsigned fslspclksel : 2; /*!< 01-00 FS/LS Phy Clock Select */
++ #define IFXUSB_HCFG_30_60_MHZ 0
++ #define IFXUSB_HCFG_48_MHZ 1
++ #define IFXUSB_HCFG_6_MHZ 2
++ } b;
++} hcfg_data_t;
++
++/*!
++ \brief Bit fields in the Host Frame Interval Register.
++ */
++typedef union hfir_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned reserved : 16;
++ unsigned frint : 16; /*!< 15-00 Frame Interval */
++ } b;
++} hfir_data_t;
++
++/*!
++ \brief Bit fields in the Host Frame Time Remaing/Number Register.
++ */
++typedef union hfnum_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned frrem : 16; /*!< 31-16 Frame Time Remaining */
++ unsigned frnum : 16; /*!< 15-00 Frame Number*/
++ #define IFXUSB_HFNUM_MAX_FRNUM 0x3FFF
++ } b;
++} hfnum_data_t;
++
++/*!
++ \brief Bit fields in the Host Periodic Transmit FIFO/Queue Status Register
++ */
++typedef union hptxsts_data
++{
++ /** raw register data */
++ uint32_t d32;
++ struct
++ {
++ /** Top of the Periodic Transmit Request Queue
++ * - bit 24 - Terminate (last entry for the selected channel)
++ */
++ unsigned ptxqtop_odd : 1; /*!< 31 Top of the Periodic Transmit Request
++ Queue Odd/even microframe*/
++ unsigned ptxqtop_chnum : 4; /*!< 30-27 Top of the Periodic Transmit Request
++ Channel Number */
++ unsigned ptxqtop_token : 2; /*!< 26-25 Top of the Periodic Transmit Request
++ Token Type
++ 0 - Zero length
++ 1 - Ping
++ 2 - Disable
++ */
++ unsigned ptxqtop_terminate : 1; /*!< 24 Top of the Periodic Transmit Request
++ Terminate (last entry for the selected channel)*/
++ unsigned ptxqspcavail : 8; /*!< 23-16 Periodic Transmit Request Queue Space Available */
++ unsigned ptxfspcavail :16; /*!< 15-00 Periodic Transmit Data FIFO Space Available */
++ } b;
++} hptxsts_data_t;
++
++/*!
++ \brief Bit fields in the Host Port Control and Status Register.
++ */
++typedef union hprt0_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned reserved19_31 :13;
++ unsigned prtspd : 2; /*!< 18-17 Port Speed */
++ #define IFXUSB_HPRT0_PRTSPD_HIGH_SPEED 0
++ #define IFXUSB_HPRT0_PRTSPD_FULL_SPEED 1
++ #define IFXUSB_HPRT0_PRTSPD_LOW_SPEED 2
++ unsigned prttstctl : 4; /*!< 16-13 Port Test Control */
++ unsigned prtpwr : 1; /*!< 12 Port Power */
++ unsigned prtlnsts : 2; /*!< 11-10 Port Line Status */
++ unsigned reserved9 : 1;
++ unsigned prtrst : 1; /*!< 08 Port Reset */
++ unsigned prtsusp : 1; /*!< 07 Port Suspend */
++ unsigned prtres : 1; /*!< 06 Port Resume */
++ unsigned prtovrcurrchng : 1; /*!< 05 Port Overcurrent Change */
++ unsigned prtovrcurract : 1; /*!< 04 Port Overcurrent Active */
++ unsigned prtenchng : 1; /*!< 03 Port Enable/Disable Change */
++ unsigned prtena : 1; /*!< 02 Port Enable */
++ unsigned prtconndet : 1; /*!< 01 Port Connect Detected */
++ unsigned prtconnsts : 1; /*!< 00 Port Connect Status */
++ }b;
++} hprt0_data_t;
++
++/*!
++ \brief Bit fields in the Host All Interrupt Register.
++ */
++typedef union haint_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned reserved : 16;
++ unsigned ch15 : 1;
++ unsigned ch14 : 1;
++ unsigned ch13 : 1;
++ unsigned ch12 : 1;
++ unsigned ch11 : 1;
++ unsigned ch10 : 1;
++ unsigned ch09 : 1;
++ unsigned ch08 : 1;
++ unsigned ch07 : 1;
++ unsigned ch06 : 1;
++ unsigned ch05 : 1;
++ unsigned ch04 : 1;
++ unsigned ch03 : 1;
++ unsigned ch02 : 1;
++ unsigned ch01 : 1;
++ unsigned ch00 : 1;
++ } b;
++ struct
++ {
++ unsigned reserved : 16;
++ unsigned chint : 16;
++ } b2;
++} haint_data_t;
++/*@}*//*IFXUSB_CSR_HOST_GLOBAL_REG*/
++/****************************************************************************/
++/*!
++ \addtogroup IFXUSB_CSR_HOST_HC_REG
++ */
++/*@{*/
++/*!
++ \brief Host Channel Specific Registers
++ There will be one set of hc registers per host channelimplemented.
++ each HC's Register are offset at :
++ 500h + * (hc_num * 20h)
++ */
++typedef struct ifxusb_hc_regs
++{
++ volatile uint32_t hcchar; /*!< 00h Host Channel Characteristic Register.*/
++ volatile uint32_t hcsplt; /*!< 04h Host Channel Split Control Register.*/
++ volatile uint32_t hcint; /*!< 08h Host Channel Interrupt Register. */
++ volatile uint32_t hcintmsk; /*!< 0Ch Host Channel Interrupt Mask Register. */
++ volatile uint32_t hctsiz; /*!< 10h Host Channel Transfer Size Register. */
++ volatile uint32_t hcdma; /*!< 14h Host Channel DMA Address Register. */
++ uint32_t reserved[2]; /*!< 18h Reserved. */
++} ifxusb_hc_regs_t;
++
++
++/*!
++ \brief Bit fields in the Host Channel Characteristics Register.
++ */
++typedef union hcchar_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned chen : 1; /*!< 31 Channel enable */
++ unsigned chdis : 1; /*!< 30 Channel disable */
++ unsigned oddfrm : 1; /*!< 29 Frame to transmit periodic transaction */
++ unsigned devaddr : 7; /*!< 28-22 Device address */
++ unsigned multicnt : 2; /*!< 21-20 Packets per frame for periodic transfers */
++ unsigned eptype : 2; /*!< 19-18 0: Control, 1: Isoc, 2: Bulk, 3: Intr */
++ unsigned lspddev : 1; /*!< 17 0: Full/high speed device, 1: Low speed device */
++ unsigned reserved : 1;
++ unsigned epdir : 1; /*!< 15 0: OUT, 1: IN */
++ unsigned epnum : 4; /*!< 14-11 Endpoint number */
++ unsigned mps :11; /*!< 10-00 Maximum packet size in bytes */
++ } b;
++} hcchar_data_t;
++
++/*!
++ \brief Bit fields in the Host Channel Split Control Register
++ */
++typedef union hcsplt_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned spltena : 1; /*!< 31 Split Enble */
++ unsigned reserved :14;
++ unsigned compsplt : 1; /*!< 16 Do Complete Split */
++ unsigned xactpos : 2; /*!< 15-14 Transaction Position */
++ #define IFXUSB_HCSPLIT_XACTPOS_MID 0
++ #define IFXUSB_HCSPLIT_XACTPOS_END 1
++ #define IFXUSB_HCSPLIT_XACTPOS_BEGIN 2
++ #define IFXUSB_HCSPLIT_XACTPOS_ALL 3
++ unsigned hubaddr : 7; /*!< 13-07 Hub Address */
++ unsigned prtaddr : 7; /*!< 06-00 Port Address */
++ } b;
++} hcsplt_data_t;
++
++/*!
++ \brief Bit fields in the Host Interrupt Register.
++ */
++typedef union hcint_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned reserved :21;
++ unsigned datatglerr : 1; /*!< 10 Data Toggle Error */
++ unsigned frmovrun : 1; /*!< 09 Frame Overrun */
++ unsigned bblerr : 1; /*!< 08 Babble Error */
++ unsigned xacterr : 1; /*!< 07 Transaction Err */
++ unsigned nyet : 1; /*!< 06 NYET Response Received */
++ unsigned ack : 1; /*!< 05 ACK Response Received */
++ unsigned nak : 1; /*!< 04 NAK Response Received */
++ unsigned stall : 1; /*!< 03 STALL Response Received */
++ unsigned ahberr : 1; /*!< 02 AHB Error */
++ unsigned chhltd : 1; /*!< 01 Channel Halted */
++ unsigned xfercomp : 1; /*!< 00 Channel Halted */
++ }b;
++} hcint_data_t;
++
++
++/*!
++ \brief Bit fields in the Host Channel Transfer Size
++ Register.
++ */
++typedef union hctsiz_data
++{
++ uint32_t d32;
++ struct
++ {
++ /** */
++ unsigned dopng : 1; /*!< 31 Do PING protocol when 1 */
++ /**
++ * Packet ID for next data packet
++ * 0: DATA0
++ * 1: DATA2
++ * 2: DATA1
++ * 3: MDATA (non-Control), SETUP (Control)
++ */
++ unsigned pid : 2; /*!< 30-29 Packet ID for next data packet
++ 0: DATA0
++ 1: DATA2
++ 2: DATA1
++ 3: MDATA (non-Control), SETUP (Control)
++ */
++ #define IFXUSB_HCTSIZ_DATA0 0
++ #define IFXUSB_HCTSIZ_DATA1 2
++ #define IFXUSB_HCTSIZ_DATA2 1
++ #define IFXUSB_HCTSIZ_MDATA 3
++ #define IFXUSB_HCTSIZ_SETUP 3
++ unsigned pktcnt :10; /*!< 28-19 Data packets to transfer */
++ unsigned xfersize :19; /*!< 18-00 Total transfer size in bytes */
++ }b;
++} hctsiz_data_t;
++
++/*@}*//*IFXUSB_CSR_HOST_HC_REG*/
++
++/****************************************************************************/
++
++/*!
++ \addtogroup IFXUSB_CSR_PWR_CLK_GATING_REG
++ */
++/*@{*/
++/*!
++ \brief Bit fields in the Power and Clock Gating Control Register
++ */
++typedef union pcgcctl_data
++{
++ uint32_t d32;
++ struct
++ {
++ unsigned reserved : 27;
++ unsigned physuspended : 1; /*!< 04 PHY Suspended */
++ unsigned rstpdwnmodule : 1; /*!< 03 Reset Power Down Modules */
++ unsigned pwrclmp : 1; /*!< 02 Power Clamp */
++ unsigned gatehclk : 1; /*!< 01 Gate Hclk */
++ unsigned stoppclk : 1; /*!< 00 Stop Pclk */
++ } b;
++} pcgcctl_data_t;
++/*@}*//*IFXUSB_CSR_PWR_CLK_GATING_REG*/
++
++/****************************************************************************/
++
++#endif //__IFXUSB_REGS_H__
+diff --git a/drivers/usb/ifxhcd/ifxusb_version.h b/drivers/usb/ifxhcd/ifxusb_version.h
+new file mode 100644
+index 0000000..2dff735
+--- /dev/null
++++ b/drivers/usb/ifxhcd/ifxusb_version.h
+@@ -0,0 +1,5 @@
++
++#ifndef IFXUSB_VERSION
++#define IFXUSB_VERSION "3.0alpha B100312"
++#endif
++
+--
+1.7.9.1
+
+++ /dev/null
-From 7f73b86b26fc58e0513a792533b7e11450aa0737 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 23 Mar 2012 16:14:33 +0100
-Subject: [PATCH 49/70] dwc_otg: remove bogus halt_channel
-
-https://lists.openwrt.org/pipermail/openwrt-devel/2012-March/014524.html
----
- drivers/usb/dwc_otg/dwc_otg_hcd_intr.c | 2 --
- 1 files changed, 0 insertions(+), 2 deletions(-)
-
---- a/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
-+++ b/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
-@@ -1278,8 +1278,6 @@ static int32_t handle_hc_ack_intr(dwc_ot
- * automatically executes the PING, then the transfer.
- */
- halt_channel(_hcd, _hc, _qtd, DWC_OTG_HC_XFER_ACK, must_free);
-- } else {
-- halt_channel(_hcd, _hc, _qtd, _hc->halt_status, must_free);
- }
- }
-
--- /dev/null
+From ce8fccecad845349cc5f6783b3812a17a074d39c Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 14 Mar 2012 15:37:19 +0100
+Subject: [PATCH 50/73] MIPS: adds gptu driver
+
+---
+ arch/mips/lantiq/xway/gptu.c | 176 ++++++++++++++++++++++++++++++++++++++++++
+ 1 files changed, 176 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/lantiq/xway/gptu.c
+
+diff --git a/arch/mips/lantiq/xway/gptu.c b/arch/mips/lantiq/xway/gptu.c
+new file mode 100644
+index 0000000..ac82c37
+--- /dev/null
++++ b/arch/mips/lantiq/xway/gptu.c
+@@ -0,0 +1,176 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/ioport.h>
++#include <linux/pm.h>
++#include <linux/export.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <asm/reboot.h>
++
++#include <lantiq_soc.h>
++#include "../clk.h"
++
++#include "../devices.h"
++
++#define ltq_gptu_w32(x, y) ltq_w32((x), ltq_gptu_membase + (y))
++#define ltq_gptu_r32(x) ltq_r32(ltq_gptu_membase + (x))
++
++
++/* the magic ID byte of the core */
++#define GPTU_MAGIC 0x59
++/* clock control register */
++#define GPTU_CLC 0x00
++/* id register */
++#define GPTU_ID 0x08
++/* interrupt node enable */
++#define GPTU_IRNEN 0xf4
++/* interrupt control register */
++#define GPTU_IRCR 0xf8
++/* interrupt capture register */
++#define GPTU_IRNCR 0xfc
++/* there are 3 identical blocks of 2 timers. calculate register offsets */
++#define GPTU_SHIFT(x) (x % 2 ? 4 : 0)
++#define GPTU_BASE(x) (((x >> 1) * 0x20) + 0x10)
++/* timer control register */
++#define GPTU_CON(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x00)
++/* timer auto reload register */
++#define GPTU_RUN(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x08)
++/* timer manual reload register */
++#define GPTU_RLD(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x10)
++/* timer count register */
++#define GPTU_CNT(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x18)
++
++/* GPTU_CON(x) */
++#define CON_CNT BIT(2)
++#define CON_EDGE_FALL BIT(7)
++#define CON_SYNC BIT(8)
++#define CON_CLK_INT BIT(10)
++
++/* GPTU_RUN(x) */
++#define RUN_SEN BIT(0)
++#define RUN_RL BIT(2)
++
++/* set clock to runmode */
++#define CLC_RMC BIT(8)
++/* bring core out of suspend */
++#define CLC_SUSPEND BIT(4)
++/* the disable bit */
++#define CLC_DISABLE BIT(0)
++
++#define TIMER_INTERRUPT (INT_NUM_IM3_IRL0 + 22)
++
++enum gptu_timer {
++ TIMER1A = 0,
++ TIMER1B,
++ TIMER2A,
++ TIMER2B,
++ TIMER3A,
++ TIMER3B
++};
++
++static struct resource ltq_gptu_resource =
++ MEM_RES("GPTU", LTQ_GPTU_BASE_ADDR, LTQ_GPTU_SIZE);
++
++static void __iomem *ltq_gptu_membase;
++
++static irqreturn_t timer_irq_handler(int irq, void *priv)
++{
++ int timer = irq - TIMER_INTERRUPT;
++ ltq_gptu_w32(1 << timer, GPTU_IRNCR);
++ return IRQ_HANDLED;
++}
++
++static void gptu_hwinit(void)
++{
++ struct clk *clk = clk_get_sys("ltq_gptu", NULL);
++ clk_enable(clk);
++ ltq_gptu_w32(0x00, GPTU_IRNEN);
++ ltq_gptu_w32(0xff, GPTU_IRNCR);
++ ltq_gptu_w32(CLC_RMC | CLC_SUSPEND, GPTU_CLC);
++}
++
++static void gptu_hwexit(void)
++{
++ ltq_gptu_w32(0x00, GPTU_IRNEN);
++ ltq_gptu_w32(0xff, GPTU_IRNCR);
++ ltq_gptu_w32(CLC_DISABLE, GPTU_CLC);
++}
++
++static int ltq_gptu_enable(struct clk *clk)
++{
++ int ret = request_irq(TIMER_INTERRUPT + clk->bits, timer_irq_handler,
++ IRQF_TIMER, "timer", NULL);
++ if (ret) {
++ pr_err("gptu: failed to request irq\n");
++ return ret;
++ }
++
++ ltq_gptu_w32(CON_CNT | CON_EDGE_FALL | CON_SYNC | CON_CLK_INT,
++ GPTU_CON(clk->bits));
++ ltq_gptu_w32(1, GPTU_RLD(clk->bits));
++ ltq_gptu_w32(ltq_gptu_r32(GPTU_IRNEN) | clk->bits, GPTU_IRNEN);
++ ltq_gptu_w32(RUN_SEN | RUN_RL, GPTU_RUN(clk->bits));
++ return 0;
++}
++
++static void ltq_gptu_disable(struct clk *clk)
++{
++ ltq_gptu_w32(0, GPTU_RUN(clk->bits));
++ ltq_gptu_w32(0, GPTU_CON(clk->bits));
++ ltq_gptu_w32(0, GPTU_RLD(clk->bits));
++ ltq_gptu_w32(ltq_gptu_r32(GPTU_IRNEN) & ~clk->bits, GPTU_IRNEN);
++ free_irq(TIMER_INTERRUPT + clk->bits, NULL);
++}
++
++static inline void clkdev_add_gptu(const char *con, unsigned int timer)
++{
++ struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
++
++ clk->cl.dev_id = "ltq_gptu";
++ clk->cl.con_id = con;
++ clk->cl.clk = clk;
++ clk->enable = ltq_gptu_enable;
++ clk->disable = ltq_gptu_disable;
++ clk->bits = timer;
++ clkdev_add(&clk->cl);
++}
++
++static int __init gptu_setup(void)
++{
++ /* remap gptu register range */
++ ltq_gptu_membase = ltq_remap_resource(<q_gptu_resource);
++ if (!ltq_gptu_membase)
++ panic("Failed to remap gptu memory");
++
++ /* power up the core */
++ gptu_hwinit();
++
++ /* the gptu has a ID register */
++ if (((ltq_gptu_r32(GPTU_ID) >> 8) & 0xff) != GPTU_MAGIC) {
++ pr_err("gptu: failed to find magic\n");
++ gptu_hwexit();
++ return -ENAVAIL;
++ }
++
++ /* register the clocks */
++ clkdev_add_gptu("timer1a", TIMER1A);
++ clkdev_add_gptu("timer1b", TIMER1B);
++ clkdev_add_gptu("timer2a", TIMER2A);
++ clkdev_add_gptu("timer2b", TIMER2B);
++ clkdev_add_gptu("timer3a", TIMER3A);
++ clkdev_add_gptu("timer3b", TIMER3B);
++
++ pr_info("gptu: 6 timers loaded\n");
++
++ return 0;
++}
++
++arch_initcall(gptu_setup);
+--
+1.7.9.1
+
+++ /dev/null
-From 09071b501014528984b158bc5408d8a738ef6883 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 11 Mar 2012 15:59:39 +0100
-Subject: [PATCH 50/70] MIPS: adds ifxhcd
-
----
- arch/mips/lantiq/xway/Makefile | 2 +-
- arch/mips/lantiq/xway/dev-ifxhcd.c | 45 +
- arch/mips/lantiq/xway/dev-ifxhcd.h | 17 +
- arch/mips/lantiq/xway/sysctrl.c | 2 +
- drivers/usb/Kconfig | 2 +
- drivers/usb/Makefile | 2 +
- drivers/usb/ifxhcd/Kconfig | 58 +
- drivers/usb/ifxhcd/Makefile | 85 +
- drivers/usb/ifxhcd/TagHistory | 171 ++
- drivers/usb/ifxhcd/ifxhcd.c | 2523 +++++++++++++++++++++++
- drivers/usb/ifxhcd/ifxhcd.h | 628 ++++++
- drivers/usb/ifxhcd/ifxhcd_es.c | 549 +++++
- drivers/usb/ifxhcd/ifxhcd_intr.c | 3742 +++++++++++++++++++++++++++++++++++
- drivers/usb/ifxhcd/ifxhcd_queue.c | 418 ++++
- drivers/usb/ifxhcd/ifxusb_cif.c | 1458 ++++++++++++++
- drivers/usb/ifxhcd/ifxusb_cif.h | 665 +++++++
- drivers/usb/ifxhcd/ifxusb_cif_d.c | 458 +++++
- drivers/usb/ifxhcd/ifxusb_cif_h.c | 846 ++++++++
- drivers/usb/ifxhcd/ifxusb_ctl.c | 1385 +++++++++++++
- drivers/usb/ifxhcd/ifxusb_driver.c | 970 +++++++++
- drivers/usb/ifxhcd/ifxusb_plat.h | 1018 ++++++++++
- drivers/usb/ifxhcd/ifxusb_regs.h | 1420 +++++++++++++
- drivers/usb/ifxhcd/ifxusb_version.h | 5 +
- 23 files changed, 16468 insertions(+), 1 deletions(-)
- create mode 100644 arch/mips/lantiq/xway/dev-ifxhcd.c
- create mode 100644 arch/mips/lantiq/xway/dev-ifxhcd.h
- create mode 100644 drivers/usb/ifxhcd/Kconfig
- create mode 100644 drivers/usb/ifxhcd/Makefile
- create mode 100644 drivers/usb/ifxhcd/TagHistory
- create mode 100644 drivers/usb/ifxhcd/ifxhcd.c
- create mode 100644 drivers/usb/ifxhcd/ifxhcd.h
- create mode 100644 drivers/usb/ifxhcd/ifxhcd_es.c
- create mode 100644 drivers/usb/ifxhcd/ifxhcd_intr.c
- create mode 100644 drivers/usb/ifxhcd/ifxhcd_queue.c
- create mode 100644 drivers/usb/ifxhcd/ifxusb_cif.c
- create mode 100644 drivers/usb/ifxhcd/ifxusb_cif.h
- create mode 100644 drivers/usb/ifxhcd/ifxusb_cif_d.c
- create mode 100644 drivers/usb/ifxhcd/ifxusb_cif_h.c
- create mode 100644 drivers/usb/ifxhcd/ifxusb_ctl.c
- create mode 100644 drivers/usb/ifxhcd/ifxusb_driver.c
- create mode 100644 drivers/usb/ifxhcd/ifxusb_plat.h
- create mode 100644 drivers/usb/ifxhcd/ifxusb_regs.h
- create mode 100644 drivers/usb/ifxhcd/ifxusb_version.h
-
---- a/arch/mips/lantiq/xway/Makefile
-+++ b/arch/mips/lantiq/xway/Makefile
-@@ -1,4 +1,4 @@
--obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o nand.o timer.o
-+obj-y := sysctrl.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o clk.o prom.o nand.o timer.o dev-ifxhcd.o
-
- obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
- obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
---- /dev/null
-+++ b/arch/mips/lantiq/xway/dev-ifxhcd.c
-@@ -0,0 +1,45 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/kernel.h>
-+#include <linux/reboot.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include <linux/etherdevice.h>
-+#include <linux/reboot.h>
-+#include <linux/time.h>
-+#include <linux/io.h>
-+#include <linux/gpio.h>
-+#include <linux/leds.h>
-+
-+#include <asm/bootinfo.h>
-+#include <asm/irq.h>
-+
-+#include <lantiq_soc.h>
-+#include <lantiq_irq.h>
-+#include <lantiq_platform.h>
-+
-+static u64 dmamask = (u32)0x1fffffff;
-+
-+static struct platform_device platform_dev = {
-+ .name = "ifxusb_hcd",
-+ .dev.dma_mask = &dmamask,
-+};
-+
-+int __init
-+xway_register_hcd(int *pins)
-+{
-+ platform_dev.dev.platform_data = pins;
-+ return platform_device_register(&platform_dev);
-+}
---- /dev/null
-+++ b/arch/mips/lantiq/xway/dev-ifxhcd.h
-@@ -0,0 +1,17 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#ifndef _LTQ_DEV_HCD_H__
-+#define _LTQ_DEV_HCD_H__
-+
-+#include <lantiq_platform.h>
-+
-+extern void __init xway_register_hcd(int *pin);
-+
-+#endif
---- a/arch/mips/lantiq/xway/sysctrl.c
-+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -166,6 +166,8 @@ void __init ltq_soc_init(void)
- clkdev_add_pmu("ltq_pcie", "pdi", 1, PMU1_PCIE_PDI);
- clkdev_add_pmu("ltq_pcie", "ctl", 1, PMU1_PCIE_CTL);
- clkdev_add_pmu("ltq_pcie", "ahb", 0, PMU_AHBM | PMU_AHBS);
-+ clkdev_add_pmu("usb0", NULL, 0, (1<<6) | 1);
-+ clkdev_add_pmu("usb1", NULL, 0, (1<<26) | (1<<27));
- } else {
- clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
- ltq_danube_io_region_clock());
---- a/drivers/usb/Kconfig
-+++ b/drivers/usb/Kconfig
-@@ -183,4 +183,6 @@ source "drivers/usb/gadget/Kconfig"
-
- source "drivers/usb/otg/Kconfig"
-
-+source "drivers/usb/ifxhcd/Kconfig"
-+
- endif # USB_SUPPORT
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -57,3 +57,5 @@ obj-$(CONFIG_USB_OTG_UTILS) += otg/
- obj-$(CONFIG_USB_GADGET) += gadget/
-
- obj-$(CONFIG_USB_COMMON) += usb-common.o
-+
-+obj-$(CONFIG_USB_HOST_IFX) += ifxhcd/
---- /dev/null
-+++ b/drivers/usb/ifxhcd/Kconfig
-@@ -0,0 +1,58 @@
-+
-+config USB_HOST_IFX
-+ tristate "Infineon USB Host Controller Driver"
-+ depends on USB
-+ default n
-+ help
-+ Infineon USB Host Controller
-+
-+config USB_HOST_IFX_B
-+ bool "USB host mode on core 1 and 2"
-+ depends on USB_HOST_IFX
-+ help
-+ Both cores run as host
-+
-+#config USB_HOST_IFX_1
-+#config USB_HOST_IFX_2
-+
-+#config IFX_DANUBE
-+#config IFX_AMAZON_SE
-+config IFX_AR9
-+ depends on USB_HOST_IFX
-+ bool "AR9"
-+
-+config IFX_VR9
-+ depends on USB_HOST_IFX
-+ bool "VR9"
-+
-+#config USB_HOST_IFX_FORCE_USB11
-+# bool "Forced USB1.1"
-+# depends on USB_HOST_IFX
-+# default n
-+# help
-+# force to be USB 1.1
-+
-+#config USB_HOST_IFX_WITH_HS_ELECT_TST
-+# bool "With HS_Electrical Test"
-+# depends on USB_HOST_IFX
-+# default n
-+# help
-+# With USBIF HSET routines
-+
-+#config USB_HOST_IFX_WITH_ISO
-+# bool "With ISO transfer"
-+# depends on USB_HOST_IFX
-+# default n
-+# help
-+# With USBIF ISO transfer
-+
-+config USB_HOST_IFX_UNALIGNED_ADJ
-+ bool "Adjust"
-+ depends on USB_HOST_IFX
-+ help
-+ USB_HOST_IFX_UNALIGNED_ADJ
-+
-+#config USB_HOST_IFX_UNALIGNED_CHK
-+#config USB_HOST_IFX_UNALIGNED_NONE
-+
-+
---- /dev/null
-+++ b/drivers/usb/ifxhcd/Makefile
-@@ -0,0 +1,85 @@
-+
-+#
-+# Makefile for USB Core files and filesystem
-+#
-+ ifxusb_host-objs := ifxusb_driver.o
-+ ifxusb_host-objs += ifxusb_ctl.o
-+ ifxusb_host-objs += ifxusb_cif.o
-+ ifxusb_host-objs += ifxusb_cif_h.o
-+ ifxusb_host-objs += ifxhcd.o
-+ ifxusb_host-objs += ifxhcd_es.o
-+ ifxusb_host-objs += ifxhcd_intr.o
-+ ifxusb_host-objs += ifxhcd_queue.o
-+
-+ifeq ($(CONFIG_IFX_TWINPASS),y)
-+ EXTRA_CFLAGS += -D__IS_TWINPASS__
-+endif
-+ifeq ($(CONFIG_IFX_DANUBE),y)
-+ EXTRA_CFLAGS += -D__IS_DANUBE__
-+endif
-+ifeq ($(CONFIG_IFX_AMAZON_SE),y)
-+ EXTRA_CFLAGS += -D__IS_AMAZON_SE__
-+endif
-+ifeq ($(CONFIG_IFX_AR9),y)
-+ EXTRA_CFLAGS += -D__IS_AR9__
-+endif
-+ifeq ($(CONFIG_IFX_AMAZON_S),y)
-+ EXTRA_CFLAGS += -D__IS_AR9__
-+endif
-+ifeq ($(CONFIG_IFX_VR9),y)
-+ EXTRA_CFLAGS += -D__IS_VR9__
-+endif
-+
-+ifeq ($(CONFIG_USB_HOST_IFX),y)
-+ EXTRA_CFLAGS += -Dlinux -D__LINUX__
-+ EXTRA_CFLAGS += -D__IS_HOST__
-+ EXTRA_CFLAGS += -D__KERNEL__
-+endif
-+
-+ifeq ($(CONFIG_USB_HOST_IFX),m)
-+ EXTRA_CFLAGS += -Dlinux -D__LINUX__
-+ EXTRA_CFLAGS += -D__IS_HOST__
-+ EXTRA_CFLAGS += -D__KERNEL__
-+endif
-+
-+ifeq ($(CONFIG_USB_DEBUG),y)
-+ EXTRA_CFLAGS += -D__DEBUG__
-+ EXTRA_CFLAGS += -D__ENABLE_DUMP__
-+endif
-+
-+ifeq ($(CONFIG_USB_HOST_IFX_B),y)
-+ EXTRA_CFLAGS += -D__IS_DUAL__
-+endif
-+ifeq ($(CONFIG_USB_HOST_IFX_1),y)
-+ EXTRA_CFLAGS += -D__IS_FIRST__
-+endif
-+ifeq ($(CONFIG_USB_HOST_IFX_2),y)
-+ EXTRA_CFLAGS += -D__IS_SECOND__
-+endif
-+
-+ifeq ($(CONFIG_USB_HOST_IFX_FORCE_USB11),y)
-+ EXTRA_CFLAGS += -D__FORCE_USB11__
-+endif
-+ifeq ($(CONFIG_USB_HOST_IFX_WITH_HS_ELECT_TST),y)
-+ EXTRA_CFLAGS += -D__WITH_HS_ELECT_TST__
-+endif
-+ifeq ($(CONFIG_USB_HOST_IFX_WITH_ISO),y)
-+ EXTRA_CFLAGS += -D__EN_ISOC__
-+endif
-+ifeq ($(CONFIG_USB_HOST_IFX_UNALIGNED_ADJ),y)
-+ EXTRA_CFLAGS += -D__UNALIGNED_BUFFER_ADJ__
-+endif
-+ifeq ($(CONFIG_USB_HOST_IFX_UNALIGNED_CHK),y)
-+ EXTRA_CFLAGS += -D__UNALIGNED_BUFFER_CHK__
-+endif
-+
-+# EXTRA_CFLAGS += -D__DYN_SOF_INTR__
-+ EXTRA_CFLAGS += -D__UEIP__
-+# EXTRA_CFLAGS += -D__EN_ISOC__
-+# EXTRA_CFLAGS += -D__EN_ISOC_SPLIT__
-+
-+## 20110628 AVM/WK New flag for less SOF IRQs
-+ EXTRA_CFLAGS += -D__USE_TIMER_4_SOF__
-+
-+obj-$(CONFIG_USB_HOST_IFX) += ifxusb_host.o
-+
---- /dev/null
-+++ b/drivers/usb/ifxhcd/TagHistory
-@@ -0,0 +1,171 @@
-+
-+
-++----------------------------------------------------------------------+
-+| TAG: svn://embeddedvm/home/SVN/drivers/usb_host20/tags/5.18-r240-non_musb_ar9_vr9-SOF_Timer_Fixed
-+| Erzeugt mit SVN-Tagger Version 3.74.
-++----------------------------------------------------------------------+
-+FIX - Korrektur bei der SOF-Timer/IRQ Steuerung. (Bug in Tag 5.17)
-+FIX - Fehlerbehandlung an mehreren Stellen korrigiert bzw. eingebaut.
-+
-+
-+
-++----------------------------------------------------------------------+
-+| TAG: svn://embeddedvm/home/SVN/drivers/usb_host20/tags/5.17-r237-non_musb_ar9_vr9-2_6_32_41_Kompatibel
-+| Erzeugt mit SVN-Tagger Version 3.73.
-++----------------------------------------------------------------------+
-+FIX - Kompatiblität zum Update auf Kernel 2.6.32-41. Weiterhin für 28er geeignet.
-+ENH - Reduktion der Interrruptlast durch Nutzung eines hrtimers anstatt SOF-IRQ.
-+
-+
-+
-++----------------------------------------------------------------------+
-+| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.16-r208-non_musb_ar9_vr9-20110421_Zero_Paket_Optimiert
-+| Erzeugt mit SVN-Tagger Version 3.66.
-++----------------------------------------------------------------------+
-+
-+FIX - VR9 / AR9 - Zero Packet. Optimierung korrigiert.
-+
-+
-+
-++----------------------------------------------------------------------+
-+| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.15-r205-non_musb_ar9_vr9-20110421_Zero_Paket_WA_funktioniert
-+| Erzeugt mit SVN-Tagger Version 3.66.
-++----------------------------------------------------------------------+
-+
-+FIX - VR9 / AR9 - "Zero Packet" funktioniert nun wirklich. Letzter Tag hatte einen Bug.
-+
-+
-+
-++----------------------------------------------------------------------+
-+| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.14-r202-non_musb_ar9_vr9-20110420_Zero_Paket_WA
-+| Erzeugt mit SVN-Tagger Version 3.66.
-++----------------------------------------------------------------------+
-+
-+FIX - VR9 / AR9 - Zero Packet Workaround: ZLP wird nun geschickt wenn URB_ZERO_PACKET aktiv ist.
-+ Wird von LTE Altair Firmware benoetig.
-+
-+
-+
-++----------------------------------------------------------------------+
-+| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.13-r199-non_musb_ar9_vr9-20110310_Init_Fix
-+| Erzeugt mit SVN-Tagger Version 3.64.
-++----------------------------------------------------------------------+
-+
-+FIX - VR9 / AR9 - Timing der Initialisierungsphase angepasst zum Kernel 2.6.28 mit UGW-4.3.1.
-+
-+
-+
-++----------------------------------------------------------------------+
-+| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.12-r184-non_musb_ar9_vr9-20110118_Full_Speed_Fix
-+| Erzeugt mit SVN-Tagger Version 3.58.
-++----------------------------------------------------------------------+
-+AR9/VR9 (3370,6840,7320):
-+Makefile - FIX - (Workaround) Debug Modus hilft gegen Enumerationsfehler bei Full Speed Drucker.
-+
-+
-+
-++----------------------------------------------------------------------+
-+| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.11-r175-non_musb_ar9_vr9-20101220_VR9_2_Ports_DMA_Fix
-+| Erzeugt mit SVN-Tagger Version 3.58.
-++----------------------------------------------------------------------+
-+
-+FIX - VR9 - Workaround DMA Burst Size. Wenn beiden USB Ports benutzt werden, geht der USB Host nicht mehr.
-+
-+
-+
-++----------------------------------------------------------------------+
-+| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.10-r169-non_musb_ar9_vr9-Fix_Spontan_Reboot
-+| Erzeugt mit SVN-Tagger Version 3.58.
-++----------------------------------------------------------------------+
-+
-+FIX - Endlosschleife führte zu einem spontanen Reboot.
-+
-+
-+
-++----------------------------------------------------------------------+
-+| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.9-r166-non_musb_ar9_vr9-20101112_deferred_completion
-+| Erzeugt mit SVN-Tagger Version 3.58.
-++----------------------------------------------------------------------+
-+
-+ENH - Deferred URB Completion Mechanismus eingebaut. Nun ca. 10% schneller bei usb-storage.
-+
-+FIX - PING Flow Control gefixt.
-+FIX - Channel Halt wird nun immer angerufen. (Split Transaction wurde nicht erfolgreich gestoppt).
-+FIX - Spinlock Benutzung verbessert. Mehr Stabilitaet.
-+
-+CHG - Ubersetztungsoption __DEBUG__ ist nun abhaengig von CONFIG_USB_DEBUG
-+
-+
-+
-++----------------------------------------------------------------------+
-+| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.8-r149-non_musb_ar9_vr9-20100827_LTE_Interrupt_EP_Fix
-+| Erzeugt mit SVN-Tagger Version 3.57.
-++----------------------------------------------------------------------+
-+AR9/VR9 - FIX - Interrupt Packets gingen verloren, wegen falschem Timing beim OddFrame Bit.
-+
-+
-+
-++----------------------------------------------------------------------+
-+| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.7-r142-non_musb_ar9_vr9-20100728_Unaligned_Buf_Fix
-+| Erzeugt mit SVN-Tagger Version 3.57.
-++----------------------------------------------------------------------+
-+FIX - "Unaligned Data" Flag wieder nach Transfer geloescht.
-+
-+
-+
-++----------------------------------------------------------------------+
-+| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.6-r133-non_musb_ar9_vr9-20100714_Toggle_Datenverlust_Fix
-+| Erzeugt mit SVN-Tagger Version 3.57.
-++----------------------------------------------------------------------+
-+TL5508 - Einige UMTS Modems funktionierten nicht korrekt an der 7320 (AR9).
-+FIX - USB Data Toggle des usbcore benutzen. Datenverlust nach EP-Halt.
-+
-+
-+
-++----------------------------------------------------------------------+
-+| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.5-r130-non_musb_ar9_vr9-20100712_USB_Ports_abschaltbar
-+| Erzeugt mit SVN-Tagger Version 3.57.
-++----------------------------------------------------------------------+
-+Power - Fix - Beide USB Port abschaltbar bei rmmod.
-+rmmod - FIX - URB_Dequeue funktionierte beim Entladen des Treibers nicht (mehrere Ursachen).
-+
-+
-+
-++----------------------------------------------------------------------+
-+| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.4-r126-non_musb_ar9_vr9-20100701_Lost_Interrupt_Workaround
-+| Erzeugt mit SVN-Tagger Version 3.57.
-++----------------------------------------------------------------------+
-+FIX - Workaround wegen verpasstem Interrupt, bei Full-Speed Interrupt EP.
-+
-+
-++----------------------------------------------------------------------+
-+| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.3-r123-non_musb_ar9_vr9-20100630_UMTS_Fixes
-+| Erzeugt mit SVN-Tagger Version 3.57.
-++----------------------------------------------------------------------+
-+FIX - Full-Speed Interrupt Endpoint hinter Hi-Speed Hub funktioniert nun (UMTS Modems)
-+FIX - usb_hcd_link_urb_from_ep API von USBCore muss benutzt werden.
-+FIX - Interrupt URBs nicht bei NAK completen.
-+
-+
-++----------------------------------------------------------------------+
-+| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.2-r114-non_musb_ar9_vr9-20100520_StickAndSurf_funktioniert
-+| Erzeugt mit SVN-Tagger Version 3.56.
-++----------------------------------------------------------------------+
-+- Merge mit neuen LANTIQ Sourcen "3.0alpha B100312"
-+- Fix - Spin_lock eingebaut, Stick&Surf funktioniert nun
-+
-+- DEP - CONFIG_USB_HOST_IFX_WITH_ISO wird nicht unterstuetzt: In der Kernel Config deaktivieren.
-+
-+
-+
-++----------------------------------------------------------------------+
-+| TAG: svn://EmbeddedVM/home/SVN/drivers/usb_host20/tags/5.1-r107-non_musb_ar9_vr9-20100505_IFXUSB_Host_mit_Energiemonitor
-+| Erzeugt mit SVN-Tagger Version 3.56.
-++----------------------------------------------------------------------+
-+USB Host Treiber für AR9 und VR9
-+--------------------------------
-+FIX - Toggle Error nach STALL - Einfacher Workaround - Nun werden Massenspeicherpartitionen erkannt!
-+AVM_POWERMETER - USB Energiemonitor Support.
-+
-+Bekanntes Problem: Stick and Surf funktioniert nur sporadisch, weil CONTROL_IRQ manchmal ausbleibt.
-+
---- /dev/null
-+++ b/drivers/usb/ifxhcd/ifxhcd.c
-@@ -0,0 +1,2523 @@
-+/*****************************************************************************
-+ ** FILE NAME : ifxhcd.c
-+ ** PROJECT : IFX USB sub-system V3
-+ ** MODULES : IFX USB sub-system Host and Device driver
-+ ** SRC VERSION : 1.0
-+ ** DATE : 1/Jan/2009
-+ ** AUTHOR : Chen, Howard
-+ ** DESCRIPTION : This file contains the structures, constants, and interfaces for
-+ ** the Host Contoller Driver (HCD).
-+ **
-+ ** The Host Controller Driver (HCD) is responsible for translating requests
-+ ** from the USB Driver into the appropriate actions on the IFXUSB controller.
-+ ** It isolates the USBD from the specifics of the controller by providing an
-+ ** API to the USBD.
-+ *****************************************************************************/
-+
-+/*!
-+ \file ifxhcd.c
-+ \ingroup IFXUSB_DRIVER_V3
-+ \brief This file contains the implementation of the HCD. In Linux,
-+ the HCD implements the hc_driver API.
-+*/
-+
-+#include <linux/version.h>
-+#include "ifxusb_version.h"
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+
-+#include <linux/device.h>
-+
-+#include <linux/errno.h>
-+#include <linux/list.h>
-+#include <linux/interrupt.h>
-+#include <linux/string.h>
-+
-+#include <linux/dma-mapping.h>
-+
-+
-+#include "ifxusb_plat.h"
-+#include "ifxusb_regs.h"
-+#include "ifxusb_cif.h"
-+#include "ifxhcd.h"
-+
-+#include <asm/irq.h>
-+
-+#ifdef CONFIG_AVM_POWERMETER
-+#include <linux/avm_power.h>
-+#endif /*--- #ifdef CONFIG_AVM_POWERMETER ---*/
-+
-+#ifdef __DEBUG__
-+ static void dump_urb_info(struct urb *_urb, char* _fn_name);
-+ static void dump_channel_info(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh);
-+#endif
-+
-+
-+/*!
-+ \brief Sets the final status of an URB and returns it to the device driver. Any
-+ required cleanup of the URB is performed.
-+ */
-+void ifxhcd_complete_urb(ifxhcd_hcd_t *_ifxhcd, ifxhcd_urbd_t *_urbd, int _status)
-+{
-+ struct urb *urb=NULL;
-+ unsigned long flags = 0;
-+
-+ /*== AVM/BC 20101111 Function called with Lock ==*/
-+ //SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
-+
-+ if (!list_empty(&_urbd->urbd_list_entry))
-+ list_del_init (&_urbd->urbd_list_entry);
-+
-+ if(!_urbd->urb)
-+ {
-+ IFX_ERROR("%s: invalid urb\n",__func__);
-+ /*== AVM/BC 20101111 Function called with Lock ==*/
-+ //SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
-+ return;
-+ }
-+
-+ urb=_urbd->urb;
-+
-+ #ifdef __DEBUG__
-+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB))
-+ {
-+ IFX_PRINT("%s: _urbd %p, urb %p, device %d, ep %d %s/%s, status=%d\n",
-+ __func__, _urbd,_urbd->urb, usb_pipedevice(_urbd->urb->pipe),
-+ usb_pipeendpoint(_urbd->urb->pipe),
-+ usb_pipein(_urbd->urb->pipe) ? "IN" : "OUT",
-+ (_urbd->is_in) ? "IN" : "OUT",
-+ _status);
-+ if (_urbd->epqh->ep_type == IFXUSB_EP_TYPE_ISOC)
-+ {
-+ int i;
-+ for (i = 0; i < _urbd->urb->number_of_packets; i++)
-+ IFX_PRINT(" ISO Desc %d status: %d\n", i, _urbd->urb->iso_frame_desc[i].status);
-+ }
-+ }
-+ #endif
-+
-+ if (!_urbd->epqh)
-+ IFX_ERROR("%s: invalid epqd\n",__func__);
-+
-+ #if defined(__UNALIGNED_BUFFER_ADJ__)
-+ else if(_urbd->is_active)
-+ {
-+ if( _urbd->epqh->aligned_checked &&
-+ _urbd->epqh->using_aligned_buf &&
-+ _urbd->xfer_buff &&
-+ _urbd->is_in )
-+ memcpy(_urbd->xfer_buff,_urbd->epqh->aligned_buf,_urbd->xfer_len);
-+ _urbd->epqh->using_aligned_buf=0;
-+ _urbd->epqh->using_aligned_setup=0;
-+ _urbd->epqh->aligned_checked=0;
-+ }
-+ #endif
-+
-+ urb->status = _status;
-+ urb->hcpriv=NULL;
-+ kfree(_urbd);
-+
-+ usb_hcd_unlink_urb_from_ep(ifxhcd_to_syshcd(_ifxhcd), urb);
-+ SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
-+
-+// usb_hcd_giveback_urb(ifxhcd_to_syshcd(_ifxhcd), urb);
-+ usb_hcd_giveback_urb(ifxhcd_to_syshcd(_ifxhcd), urb, _status);
-+
-+ /*== AVM/BC 20100630 - 2.6.28 needs HCD link/unlink URBs ==*/
-+ SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
-+}
-+
-+/*== AVM/BC 20101111 URB Complete deferred
-+ * Must be called with Spinlock
-+ */
-+
-+/*!
-+ \brief Inserts an urbd structur in the completion list. The urbd will be
-+ later completed by select_eps_sub
-+ */
-+void defer_ifxhcd_complete_urb(ifxhcd_hcd_t *_ifxhcd, ifxhcd_urbd_t *_urbd, int _status)
-+{
-+
-+ _urbd->status = _status;
-+
-+ //Unlink Urbd from epqh / Insert it into the complete list
-+ list_move_tail(&_urbd->urbd_list_entry, &_ifxhcd->urbd_complete_list);
-+
-+}
-+
-+/*!
-+ \brief Processes all the URBs in a single EPQHs. Completes them with
-+ status and frees the URBD.
-+ */
-+//static
-+void kill_all_urbs_in_epqh(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh, int _status)
-+{
-+ struct list_head *urbd_item;
-+ ifxhcd_urbd_t *urbd;
-+
-+ if(!_epqh)
-+ return;
-+
-+ for (urbd_item = _epqh->urbd_list.next;
-+ urbd_item != &_epqh->urbd_list;
-+ urbd_item = _epqh->urbd_list.next)
-+ {
-+ urbd = list_entry(urbd_item, ifxhcd_urbd_t, urbd_list_entry);
-+ ifxhcd_complete_urb(_ifxhcd, urbd, _status);
-+ }
-+}
-+
-+
-+/*!
-+ \brief Free all EPS in one Processes all the URBs in a single list of EPQHs. Completes them with
-+ -ETIMEDOUT and frees the URBD.
-+ */
-+//static
-+void epqh_list_free(ifxhcd_hcd_t *_ifxhcd, struct list_head *_epqh_list)
-+{
-+ struct list_head *item;
-+ ifxhcd_epqh_t *epqh;
-+
-+ if (!_epqh_list)
-+ return;
-+ if (_epqh_list->next == NULL) /* The list hasn't been initialized yet. */
-+ return;
-+
-+ /* Ensure there are no URBDs or URBs left. */
-+ for (item = _epqh_list->next; item != _epqh_list; item = _epqh_list->next)
-+ {
-+ epqh = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
-+ kill_all_urbs_in_epqh(_ifxhcd, epqh, -ETIMEDOUT);
-+ ifxhcd_epqh_free(epqh);
-+ }
-+}
-+
-+
-+
-+//static
-+void epqh_list_free_all(ifxhcd_hcd_t *_ifxhcd)
-+{
-+ unsigned long flags;
-+
-+ /*== AVM/BC 20101111 - 2.6.28 Needs Spinlock ==*/
-+ SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
-+
-+ epqh_list_free(_ifxhcd, &_ifxhcd->epqh_np_active );
-+ epqh_list_free(_ifxhcd, &_ifxhcd->epqh_np_ready );
-+ epqh_list_free(_ifxhcd, &_ifxhcd->epqh_intr_active );
-+ epqh_list_free(_ifxhcd, &_ifxhcd->epqh_intr_ready );
-+ #ifdef __EN_ISOC__
-+ epqh_list_free(_ifxhcd, &_ifxhcd->epqh_isoc_active );
-+ epqh_list_free(_ifxhcd, &_ifxhcd->epqh_isoc_ready );
-+ #endif
-+ epqh_list_free(_ifxhcd, &_ifxhcd->epqh_stdby );
-+
-+ SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
-+
-+}
-+
-+
-+/*!
-+ \brief This function is called to handle the disconnection of host port.
-+ */
-+int32_t ifxhcd_disconnect(ifxhcd_hcd_t *_ifxhcd)
-+{
-+ IFX_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, _ifxhcd);
-+
-+ /* Set status flags for the hub driver. */
-+ _ifxhcd->flags.b.port_connect_status_change = 1;
-+ _ifxhcd->flags.b.port_connect_status = 0;
-+
-+ /*
-+ * Shutdown any transfers in process by clearing the Tx FIFO Empty
-+ * interrupt mask and status bits and disabling subsequent host
-+ * channel interrupts.
-+ */
-+ {
-+ gint_data_t intr = { .d32 = 0 };
-+ intr.b.nptxfempty = 1;
-+ intr.b.ptxfempty = 1;
-+ intr.b.hcintr = 1;
-+ ifxusb_mreg (&_ifxhcd->core_if.core_global_regs->gintmsk, intr.d32, 0);
-+ ifxusb_mreg (&_ifxhcd->core_if.core_global_regs->gintsts, intr.d32, 0);
-+ }
-+
-+ /* Respond with an error status to all URBs in the schedule. */
-+ epqh_list_free_all(_ifxhcd);
-+
-+ /* Clean up any host channels that were in use. */
-+ {
-+ int num_channels;
-+ ifxhcd_hc_t *channel;
-+ ifxusb_hc_regs_t *hc_regs;
-+ hcchar_data_t hcchar;
-+ int i;
-+
-+ num_channels = _ifxhcd->core_if.params.host_channels;
-+
-+ for (i = 0; i < num_channels; i++)
-+ {
-+ channel = &_ifxhcd->ifxhc[i];
-+ if (list_empty(&channel->hc_list_entry))
-+ {
-+ hc_regs = _ifxhcd->core_if.hc_regs[i];
-+ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-+ if (hcchar.b.chen)
-+ {
-+ /* Halt the channel. */
-+ hcchar.b.chdis = 1;
-+ ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
-+ }
-+ list_add_tail(&channel->hc_list_entry, &_ifxhcd->free_hc_list);
-+ ifxhcd_hc_cleanup(&_ifxhcd->core_if, channel);
-+ }
-+ }
-+ }
-+ return 1;
-+}
-+
-+
-+/*!
-+ \brief Frees secondary storage associated with the ifxhcd_hcd structure contained
-+ in the struct usb_hcd field.
-+ */
-+static void ifxhcd_freeextra(struct usb_hcd *_syshcd)
-+{
-+ ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd(_syshcd);
-+
-+ IFX_DEBUGPL(DBG_HCD, "IFXUSB HCD FREE\n");
-+
-+ /* Free memory for EPQH/URBD lists */
-+ epqh_list_free_all(ifxhcd);
-+
-+ /* Free memory for the host channels. */
-+ ifxusb_free_buf(ifxhcd->status_buf);
-+ return;
-+}
-+#ifdef __USE_TIMER_4_SOF__
-+static enum hrtimer_restart ifxhcd_timer_func(struct hrtimer *timer) {
-+ ifxhcd_hcd_t *ifxhcd = container_of(timer, ifxhcd_hcd_t, hr_timer);
-+
-+ ifxhcd_handle_intr(ifxhcd);
-+
-+ return HRTIMER_NORESTART;
-+}
-+#endif
-+
-+/*!
-+ \brief Initializes the HCD. This function allocates memory for and initializes the
-+ static parts of the usb_hcd and ifxhcd_hcd structures. It also registers the
-+ USB bus with the core and calls the hc_driver->start() function. It returns
-+ a negative error on failure.
-+ */
-+int ifxhcd_init(ifxhcd_hcd_t *_ifxhcd)
-+{
-+ int retval = 0;
-+ struct usb_hcd *syshcd = NULL;
-+
-+ IFX_DEBUGPL(DBG_HCD, "IFX USB HCD INIT\n");
-+
-+ spin_lock_init(&_ifxhcd->lock);
-+#ifdef __USE_TIMER_4_SOF__
-+ hrtimer_init(&_ifxhcd->hr_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-+ _ifxhcd->hr_timer.function = ifxhcd_timer_func;
-+#endif
-+ _ifxhcd->hc_driver.description = _ifxhcd->core_if.core_name;
-+ _ifxhcd->hc_driver.product_desc = "IFX USB Controller";
-+ //_ifxhcd->hc_driver.hcd_priv_size = sizeof(ifxhcd_hcd_t);
-+ _ifxhcd->hc_driver.hcd_priv_size = sizeof(unsigned long);
-+ _ifxhcd->hc_driver.irq = ifxhcd_irq;
-+ _ifxhcd->hc_driver.flags = HCD_MEMORY | HCD_USB2;
-+ _ifxhcd->hc_driver.start = ifxhcd_start;
-+ _ifxhcd->hc_driver.stop = ifxhcd_stop;
-+ //_ifxhcd->hc_driver.reset =
-+ //_ifxhcd->hc_driver.suspend =
-+ //_ifxhcd->hc_driver.resume =
-+ _ifxhcd->hc_driver.urb_enqueue = ifxhcd_urb_enqueue;
-+ _ifxhcd->hc_driver.urb_dequeue = ifxhcd_urb_dequeue;
-+ _ifxhcd->hc_driver.endpoint_disable = ifxhcd_endpoint_disable;
-+ _ifxhcd->hc_driver.get_frame_number = ifxhcd_get_frame_number;
-+ _ifxhcd->hc_driver.hub_status_data = ifxhcd_hub_status_data;
-+ _ifxhcd->hc_driver.hub_control = ifxhcd_hub_control;
-+ //_ifxhcd->hc_driver.hub_suspend =
-+ //_ifxhcd->hc_driver.hub_resume =
-+
-+ /* Allocate memory for and initialize the base HCD and */
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
-+ syshcd = usb_create_hcd(&_ifxhcd->hc_driver, _ifxhcd->dev, _ifxhcd->core_if.core_name);
-+#else
-+ syshcd = usb_create_hcd(&_ifxhcd->hc_driver, _ifxhcd->dev, _ifxhcd->dev->bus_id);
-+#endif
-+
-+ if (syshcd == NULL)
-+ {
-+ retval = -ENOMEM;
-+ goto error1;
-+ }
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
-+ syshcd->has_tt = 1;
-+#endif
-+
-+ syshcd->rsrc_start = (unsigned long)_ifxhcd->core_if.core_global_regs;
-+ syshcd->regs = (void *)_ifxhcd->core_if.core_global_regs;
-+ syshcd->self.otg_port = 0;
-+
-+ //*((unsigned long *)(&(syshcd->hcd_priv)))=(unsigned long)_ifxhcd;
-+ //*((unsigned long *)(&(syshcd->hcd_priv[0])))=(unsigned long)_ifxhcd;
-+ syshcd->hcd_priv[0]=(unsigned long)_ifxhcd;
-+ _ifxhcd->syshcd=syshcd;
-+
-+ INIT_LIST_HEAD(&_ifxhcd->epqh_np_active );
-+ INIT_LIST_HEAD(&_ifxhcd->epqh_np_ready );
-+ INIT_LIST_HEAD(&_ifxhcd->epqh_intr_active );
-+ INIT_LIST_HEAD(&_ifxhcd->epqh_intr_ready );
-+ #ifdef __EN_ISOC__
-+ INIT_LIST_HEAD(&_ifxhcd->epqh_isoc_active );
-+ INIT_LIST_HEAD(&_ifxhcd->epqh_isoc_ready );
-+ #endif
-+ INIT_LIST_HEAD(&_ifxhcd->epqh_stdby );
-+ INIT_LIST_HEAD(&_ifxhcd->urbd_complete_list);
-+
-+ /*
-+ * Create a host channel descriptor for each host channel implemented
-+ * in the controller. Initialize the channel descriptor array.
-+ */
-+ INIT_LIST_HEAD(&_ifxhcd->free_hc_list);
-+ {
-+ int num_channels = _ifxhcd->core_if.params.host_channels;
-+ int i;
-+ for (i = 0; i < num_channels; i++)
-+ {
-+ _ifxhcd->ifxhc[i].hc_num = i;
-+ IFX_DEBUGPL(DBG_HCDV, "HCD Added channel #%d\n", i);
-+ }
-+ }
-+
-+ /* Set device flags indicating whether the HCD supports DMA. */
-+ if(_ifxhcd->dev->dma_mask)
-+ *(_ifxhcd->dev->dma_mask) = ~0;
-+ _ifxhcd->dev->coherent_dma_mask = ~0;
-+
-+ /*
-+ * Finish generic HCD initialization and start the HCD. This function
-+ * allocates the DMA buffer pool, registers the USB bus, requests the
-+ * IRQ line, and calls ifxusb_hcd_start method.
-+ */
-+// retval = usb_add_hcd(syshcd, _ifxhcd->core_if.irq, SA_INTERRUPT|SA_SHIRQ);
-+ retval = usb_add_hcd(syshcd, _ifxhcd->core_if.irq, IRQF_DISABLED | IRQF_SHARED );
-+ if (retval < 0)
-+ goto error2;
-+
-+ /*
-+ * Allocate space for storing data on status transactions. Normally no
-+ * data is sent, but this space acts as a bit bucket. This must be
-+ * done after usb_add_hcd since that function allocates the DMA buffer
-+ * pool.
-+ */
-+ _ifxhcd->status_buf = ifxusb_alloc_buf(IFXHCD_STATUS_BUF_SIZE, 1);
-+
-+ if (_ifxhcd->status_buf)
-+ {
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
-+ IFX_DEBUGPL(DBG_HCD, "IFX USB HCD Initialized, bus=%s, usbbus=%d\n", _ifxhcd->core_if.core_name, syshcd->self.busnum);
-+#else
-+ IFX_DEBUGPL(DBG_HCD, "IFX USB HCD Initialized, bus=%s, usbbus=%d\n", _ifxhcd->dev->bus_id, syshcd->self.busnum);
-+#endif
-+ return 0;
-+ }
-+ IFX_ERROR("%s: status_buf allocation failed\n", __func__);
-+
-+ /* Error conditions */
-+ usb_remove_hcd(syshcd);
-+error2:
-+ ifxhcd_freeextra(syshcd);
-+ usb_put_hcd(syshcd);
-+error1:
-+ return retval;
-+}
-+
-+/*!
-+ \brief Removes the HCD.
-+ Frees memory and resources associated with the HCD and deregisters the bus.
-+ */
-+void ifxhcd_remove(ifxhcd_hcd_t *_ifxhcd)
-+{
-+ struct usb_hcd *syshcd = ifxhcd_to_syshcd(_ifxhcd);
-+
-+ IFX_DEBUGPL(DBG_HCD, "IFX USB HCD REMOVE\n");
-+
-+/* == AVM/WK 20100709 - Fix: Order changed, disable IRQs not before remove_hcd == */
-+
-+ usb_remove_hcd(syshcd);
-+
-+ /* Turn off all interrupts */
-+ ifxusb_wreg (&_ifxhcd->core_if.core_global_regs->gintmsk, 0);
-+ ifxusb_mreg (&_ifxhcd->core_if.core_global_regs->gahbcfg, 1, 0);
-+
-+ ifxhcd_freeextra(syshcd);
-+
-+ usb_put_hcd(syshcd);
-+
-+ return;
-+}
-+
-+
-+/* =========================================================================
-+ * Linux HC Driver Functions
-+ * ========================================================================= */
-+
-+/*!
-+ \brief Initializes the IFXUSB controller and its root hub and prepares it for host
-+ mode operation. Activates the root port. Returns 0 on success and a negative
-+ error code on failure.
-+ Called by USB stack.
-+ */
-+int ifxhcd_start(struct usb_hcd *_syshcd)
-+{
-+ ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd (_syshcd);
-+ ifxusb_core_if_t *core_if = &ifxhcd->core_if;
-+ struct usb_bus *bus;
-+
-+ IFX_DEBUGPL(DBG_HCD, "IFX USB HCD START\n");
-+
-+ bus = hcd_to_bus(_syshcd);
-+
-+ /* Initialize the bus state. */
-+ _syshcd->state = HC_STATE_RUNNING;
-+
-+ /* Initialize and connect root hub if one is not already attached */
-+ if (bus->root_hub)
-+ {
-+ IFX_DEBUGPL(DBG_HCD, "IFX USB HCD Has Root Hub\n");
-+ /* Inform the HUB driver to resume. */
-+ usb_hcd_resume_root_hub(_syshcd);
-+ }
-+
-+ ifxhcd->flags.d32 = 0;
-+
-+ /* Put all channels in the free channel list and clean up channel states.*/
-+ {
-+ struct list_head *item;
-+ item = ifxhcd->free_hc_list.next;
-+ while (item != &ifxhcd->free_hc_list)
-+ {
-+ list_del(item);
-+ item = ifxhcd->free_hc_list.next;
-+ }
-+ }
-+ {
-+ int num_channels = ifxhcd->core_if.params.host_channels;
-+ int i;
-+ for (i = 0; i < num_channels; i++)
-+ {
-+ ifxhcd_hc_t *channel;
-+ channel = &ifxhcd->ifxhc[i];
-+ list_add_tail(&channel->hc_list_entry, &ifxhcd->free_hc_list);
-+ ifxhcd_hc_cleanup(&ifxhcd->core_if, channel);
-+ }
-+ }
-+ /* Initialize the USB core for host mode operation. */
-+
-+ ifxusb_host_enable_interrupts(core_if);
-+ ifxusb_enable_global_interrupts(core_if);
-+ ifxusb_phy_power_on (core_if);
-+
-+ ifxusb_vbus_init(core_if);
-+
-+ /* Turn on the vbus power. */
-+ {
-+ hprt0_data_t hprt0;
-+ hprt0.d32 = ifxusb_read_hprt0(core_if);
-+
-+ IFX_PRINT("Init: Power Port (%d)\n", hprt0.b.prtpwr);
-+ if (hprt0.b.prtpwr == 0 )
-+ {
-+ hprt0.b.prtpwr = 1;
-+ ifxusb_wreg(core_if->hprt0, hprt0.d32);
-+ ifxusb_vbus_on(core_if);
-+ }
-+ }
-+ return 0;
-+}
-+
-+
-+/*!
-+ \brief Halts the IFXUSB host mode operations in a clean manner. USB transfers are
-+ stopped.
-+ */
-+void ifxhcd_stop(struct usb_hcd *_syshcd)
-+{
-+ ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd(_syshcd);
-+ hprt0_data_t hprt0 = { .d32=0 };
-+
-+ IFX_DEBUGPL(DBG_HCD, "IFX USB HCD STOP\n");
-+
-+ /* Turn off all interrupts. */
-+ ifxusb_disable_global_interrupts(&ifxhcd->core_if );
-+ ifxusb_host_disable_interrupts(&ifxhcd->core_if );
-+#ifdef __USE_TIMER_4_SOF__
-+ hrtimer_cancel(&ifxhcd->hr_timer);
-+#endif
-+ /*
-+ * The root hub should be disconnected before this function is called.
-+ * The disconnect will clear the URBD lists (via ..._hcd_urb_dequeue)
-+ * and the EPQH lists (via ..._hcd_endpoint_disable).
-+ */
-+
-+ /* Turn off the vbus power */
-+ IFX_PRINT("PortPower off\n");
-+
-+ ifxusb_vbus_off(&ifxhcd->core_if );
-+
-+ ifxusb_vbus_free(&ifxhcd->core_if );
-+
-+ hprt0.b.prtpwr = 0;
-+ ifxusb_wreg(ifxhcd->core_if.hprt0, hprt0.d32);
-+ return;
-+}
-+
-+/*!
-+ \brief Returns the current frame number
-+ */
-+int ifxhcd_get_frame_number(struct usb_hcd *_syshcd)
-+{
-+ ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd(_syshcd);
-+ hfnum_data_t hfnum;
-+
-+ hfnum.d32 = ifxusb_rreg(&ifxhcd->core_if.host_global_regs->hfnum);
-+
-+ return hfnum.b.frnum;
-+}
-+
-+/*!
-+ \brief Starts processing a USB transfer request specified by a USB Request Block
-+ (URB). mem_flags indicates the type of memory allocation to use while
-+ processing this URB.
-+ */
-+int ifxhcd_urb_enqueue( struct usb_hcd *_syshcd,
-+ /*--- struct usb_host_endpoint *_sysep, Parameter im 2.6.28 entfallen ---*/
-+ struct urb *_urb,
-+ gfp_t _mem_flags)
-+{
-+ int retval = 0;
-+ ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd (_syshcd);
-+ struct usb_host_endpoint *_sysep = ifxhcd_urb_to_endpoint(_urb);
-+ ifxhcd_epqh_t *epqh;
-+
-+ #ifdef __DEBUG__
-+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB))
-+ dump_urb_info(_urb, "ifxusb_hcd_urb_enqueue");
-+ #endif //__DEBUG__
-+
-+ if (!ifxhcd->flags.b.port_connect_status) /* No longer connected. */
-+ return -ENODEV;
-+
-+ #ifndef __EN_ISOC__
-+ if(usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS)
-+ {
-+ IFX_ERROR("ISOC transfer not supported!!!\n");
-+ return -ENODEV;
-+ }
-+ #endif
-+
-+ retval=ifxhcd_urbd_create (ifxhcd,_urb);
-+
-+ if (retval)
-+ {
-+ IFX_ERROR("IFXUSB HCD URB Enqueue failed creating URBD\n");
-+ return retval;
-+ }
-+ epqh = (ifxhcd_epqh_t *) _sysep->hcpriv;
-+ ifxhcd_epqh_ready(ifxhcd, epqh);
-+
-+ select_eps(ifxhcd);
-+ //enable_sof(ifxhcd);
-+ {
-+ gint_data_t gintsts;
-+ gintsts.d32=0;
-+ gintsts.b.sofintr = 1;
-+ ifxusb_mreg(&ifxhcd->core_if.core_global_regs->gintmsk, 0,gintsts.d32);
-+ }
-+
-+ return retval;
-+}
-+
-+/*!
-+ \brief Aborts/cancels a USB transfer request. Always returns 0 to indicate
-+ success.
-+ */
-+int ifxhcd_urb_dequeue( struct usb_hcd *_syshcd,
-+ struct urb *_urb, int status /* Parameter neu in 2.6.28 */)
-+{
-+ unsigned long flags;
-+ ifxhcd_hcd_t *ifxhcd;
-+ ifxhcd_urbd_t *urbd;
-+ ifxhcd_epqh_t *epqh;
-+ int is_active=0;
-+ int rc;
-+
-+ struct usb_host_endpoint *_sysep;
-+
-+ IFX_DEBUGPL(DBG_HCD, "IFXUSB HCD URB Dequeue\n");
-+
-+ #ifndef __EN_ISOC__
-+ if(usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS)
-+ return 0;
-+ #endif
-+
-+ _sysep = ifxhcd_urb_to_endpoint(_urb);
-+
-+ ifxhcd = syshcd_to_ifxhcd(_syshcd);
-+
-+ SPIN_LOCK_IRQSAVE(&ifxhcd->lock, flags);
-+
-+ /*== AVM/BC 20100630 - 2.6.28 needs HCD link/unlink URBs ==*/
-+ rc = usb_hcd_check_unlink_urb(_syshcd, _urb, status);
-+ if (rc) {
-+ SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
-+ return rc;
-+ }
-+
-+ urbd = (ifxhcd_urbd_t *) _urb->hcpriv;
-+
-+ if(_sysep)
-+ epqh = (ifxhcd_epqh_t *) _sysep->hcpriv;
-+ else
-+ epqh = (ifxhcd_epqh_t *) urbd->epqh;
-+
-+ if(epqh!=urbd->epqh)
-+ IFX_ERROR("%s inconsistant epqh %p %p\n",__func__,epqh,urbd->epqh);
-+
-+ #ifdef __DEBUG__
-+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB))
-+ {
-+ dump_urb_info(_urb, "ifxhcd_urb_dequeue");
-+ if (epqh->is_active)
-+ dump_channel_info(ifxhcd, epqh);
-+ }
-+ #endif //__DEBUG__
-+
-+ if(!epqh->hc)
-+ epqh->is_active=0;
-+ else if (!ifxhcd->flags.b.port_connect_status)
-+ epqh->is_active=0;
-+ else if (epqh->is_active && urbd->is_active)
-+ {
-+ /*== AVM/WK 20100709 - halt channel only if really started ==*/
-+ //if (epqh->hc->xfer_started && !epqh->hc->wait_for_sof) {
-+ /*== AVM/WK 20101112 - halt channel if started ==*/
-+ if (epqh->hc->xfer_started) {
-+ /*
-+ * If still connected (i.e. in host mode), halt the
-+ * channel so it can be used for other transfers. If
-+ * no longer connected, the host registers can't be
-+ * written to halt the channel since the core is in
-+ * device mode.
-+ */
-+ /* == 20110803 AVM/WK FIX propagate status == */
-+ if (_urb->status == -EINPROGRESS) {
-+ _urb->status = status;
-+ }
-+ ifxhcd_hc_halt(&ifxhcd->core_if, epqh->hc, HC_XFER_URB_DEQUEUE);
-+ epqh->hc = NULL;
-+ is_active=1;
-+ }
-+ }
-+
-+ if(is_active)
-+ {
-+ SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
-+ }
-+ else
-+ {
-+ list_del_init(&urbd->urbd_list_entry);
-+ kfree (urbd);
-+
-+ /*== AVM/BC 20100630 - 2.6.28 needs HCD link/unlink URBs ==*/
-+ usb_hcd_unlink_urb_from_ep(_syshcd, _urb);
-+
-+ SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
-+ _urb->hcpriv = NULL;
-+// usb_hcd_giveback_urb(_syshcd, _urb);
-+ usb_hcd_giveback_urb(_syshcd, _urb, status /* neu in 2.6.28 */);
-+ select_eps(ifxhcd);
-+ }
-+
-+ return 0;
-+}
-+
-+
-+
-+/*!
-+ \brief Frees resources in the IFXUSB controller related to a given endpoint. Also
-+ clears state in the HCD related to the endpoint. Any URBs for the endpoint
-+ must already be dequeued.
-+ */
-+void ifxhcd_endpoint_disable( struct usb_hcd *_syshcd,
-+ struct usb_host_endpoint *_sysep)
-+{
-+ ifxhcd_epqh_t *epqh;
-+ ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd(_syshcd);
-+ unsigned long flags;
-+
-+ int retry = 0;
-+
-+ IFX_DEBUGPL(DBG_HCD, "IFXUSB HCD EP DISABLE: _bEndpointAddress=0x%02x, "
-+ "endpoint=%d\n", _sysep->desc.bEndpointAddress,
-+ ifxhcd_ep_addr_to_endpoint(_sysep->desc.bEndpointAddress));
-+
-+ SPIN_LOCK_IRQSAVE(&ifxhcd->lock, flags);
-+ if((uint32_t)_sysep>=0x80000000 && (uint32_t)_sysep->hcpriv>=(uint32_t)0x80000000)
-+ {
-+ epqh = (ifxhcd_epqh_t *)(_sysep->hcpriv);
-+ if (epqh && epqh->sysep==_sysep)
-+ {
-+
-+#if 1 /*== AVM/BC 20101111 CHG Option active: Kill URBs when disabling EP ==*/
-+ while (!list_empty(&epqh->urbd_list))
-+ {
-+ if (retry++ > 250)
-+ {
-+ IFX_WARN("IFXUSB HCD EP DISABLE:"
-+ " URBD List for this endpoint is not empty\n");
-+ break;
-+ }
-+ kill_all_urbs_in_epqh(ifxhcd, epqh, -ETIMEDOUT);
-+ }
-+#else
-+ while (!list_empty(&epqh->urbd_list))
-+ {
-+ /** Check that the QTD list is really empty */
-+ if (retry++ > 250)
-+ {
-+ IFX_WARN("IFXUSB HCD EP DISABLE:"
-+ " URBD List for this endpoint is not empty\n");
-+ break;
-+ }
-+ SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
-+ schedule_timeout_uninterruptible(1);
-+ SPIN_LOCK_IRQSAVE(&ifxhcd->lock, flags);
-+ }
-+#endif
-+
-+ ifxhcd_epqh_free(epqh);
-+ _sysep->hcpriv = NULL;
-+ }
-+ }
-+ SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
-+}
-+
-+
-+/*!
-+ \brief Handles host mode interrupts for the IFXUSB controller. Returns IRQ_NONE if
-+ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
-+ * interrupt.
-+ *
-+ * This function is called by the USB core when an interrupt occurs
-+ */
-+irqreturn_t ifxhcd_irq(struct usb_hcd *_syshcd)
-+{
-+ ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd (_syshcd);
-+ int32_t retval=0;
-+
-+ //mask_and_ack_ifx_irq (ifxhcd->core_if.irq);
-+ retval = ifxhcd_handle_intr(ifxhcd);
-+ return IRQ_RETVAL(retval);
-+}
-+
-+
-+/*!
-+ \brief Handles host mode Over Current Interrupt
-+ */
-+irqreturn_t ifxhcd_oc_irq(int _irq , void *_dev)
-+{
-+ ifxhcd_hcd_t *ifxhcd = _dev;
-+ int32_t retval=1;
-+
-+ ifxhcd->flags.b.port_over_current_change = 1;
-+ ifxusb_vbus_off(&ifxhcd->core_if);
-+ IFX_DEBUGP("OC INTERRUPT # %d\n",ifxhcd->core_if.core_no);
-+
-+ //mask_and_ack_ifx_irq (_irq);
-+ return IRQ_RETVAL(retval);
-+}
-+
-+/*!
-+ \brief Creates Status Change bitmap for the root hub and root port. The bitmap is
-+ returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
-+ is the status change indicator for the single root port. Returns 1 if either
-+ change indicator is 1, otherwise returns 0.
-+ */
-+int ifxhcd_hub_status_data(struct usb_hcd *_syshcd, char *_buf)
-+{
-+ ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd (_syshcd);
-+
-+ _buf[0] = 0;
-+ _buf[0] |= (ifxhcd->flags.b.port_connect_status_change ||
-+ ifxhcd->flags.b.port_reset_change ||
-+ ifxhcd->flags.b.port_enable_change ||
-+ ifxhcd->flags.b.port_suspend_change ||
-+ ifxhcd->flags.b.port_over_current_change) << 1;
-+
-+ #ifdef __DEBUG__
-+ if (_buf[0])
-+ {
-+ IFX_DEBUGPL(DBG_HCD, "IFXUSB HCD HUB STATUS DATA:"
-+ " Root port status changed\n");
-+ IFX_DEBUGPL(DBG_HCDV, " port_connect_status_change: %d\n",
-+ ifxhcd->flags.b.port_connect_status_change);
-+ IFX_DEBUGPL(DBG_HCDV, " port_reset_change: %d\n",
-+ ifxhcd->flags.b.port_reset_change);
-+ IFX_DEBUGPL(DBG_HCDV, " port_enable_change: %d\n",
-+ ifxhcd->flags.b.port_enable_change);
-+ IFX_DEBUGPL(DBG_HCDV, " port_suspend_change: %d\n",
-+ ifxhcd->flags.b.port_suspend_change);
-+ IFX_DEBUGPL(DBG_HCDV, " port_over_current_change: %d\n",
-+ ifxhcd->flags.b.port_over_current_change);
-+ }
-+ #endif //__DEBUG__
-+ return (_buf[0] != 0);
-+}
-+
-+#ifdef __WITH_HS_ELECT_TST__
-+ extern void do_setup(ifxusb_core_if_t *_core_if) ;
-+ extern void do_in_ack(ifxusb_core_if_t *_core_if);
-+#endif //__WITH_HS_ELECT_TST__
-+
-+/*!
-+ \brief Handles hub class-specific requests.
-+ */
-+int ifxhcd_hub_control( struct usb_hcd *_syshcd,
-+ u16 _typeReq,
-+ u16 _wValue,
-+ u16 _wIndex,
-+ char *_buf,
-+ u16 _wLength)
-+{
-+ int retval = 0;
-+
-+ ifxhcd_hcd_t *ifxhcd = syshcd_to_ifxhcd (_syshcd);
-+ ifxusb_core_if_t *core_if = &ifxhcd->core_if;
-+ struct usb_hub_descriptor *desc;
-+ hprt0_data_t hprt0 = {.d32 = 0};
-+
-+ uint32_t port_status;
-+
-+ switch (_typeReq)
-+ {
-+ case ClearHubFeature:
-+ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
-+ "ClearHubFeature 0x%x\n", _wValue);
-+ switch (_wValue)
-+ {
-+ case C_HUB_LOCAL_POWER:
-+ case C_HUB_OVER_CURRENT:
-+ /* Nothing required here */
-+ break;
-+ default:
-+ retval = -EINVAL;
-+ IFX_ERROR ("IFXUSB HCD - "
-+ "ClearHubFeature request %xh unknown\n", _wValue);
-+ }
-+ break;
-+ case ClearPortFeature:
-+ if (!_wIndex || _wIndex > 1)
-+ goto error;
-+
-+ switch (_wValue)
-+ {
-+ case USB_PORT_FEAT_ENABLE:
-+ IFX_DEBUGPL (DBG_ANY, "IFXUSB HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_ENABLE\n");
-+ hprt0.d32 = ifxusb_read_hprt0 (core_if);
-+ hprt0.b.prtena = 1;
-+ ifxusb_wreg(core_if->hprt0, hprt0.d32);
-+ break;
-+ case USB_PORT_FEAT_SUSPEND:
-+ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
-+ hprt0.d32 = ifxusb_read_hprt0 (core_if);
-+ hprt0.b.prtres = 1;
-+ ifxusb_wreg(core_if->hprt0, hprt0.d32);
-+ /* Clear Resume bit */
-+ mdelay (100);
-+ hprt0.b.prtres = 0;
-+ ifxusb_wreg(core_if->hprt0, hprt0.d32);
-+ break;
-+ case USB_PORT_FEAT_POWER:
-+ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_POWER\n");
-+ #ifdef __IS_DUAL__
-+ ifxusb_vbus_off(core_if);
-+ #else
-+ ifxusb_vbus_off(core_if);
-+ #endif
-+ hprt0.d32 = ifxusb_read_hprt0 (core_if);
-+ hprt0.b.prtpwr = 0;
-+ ifxusb_wreg(core_if->hprt0, hprt0.d32);
-+ break;
-+ case USB_PORT_FEAT_INDICATOR:
-+ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
-+ /* Port inidicator not supported */
-+ break;
-+ case USB_PORT_FEAT_C_CONNECTION:
-+ /* Clears drivers internal connect status change
-+ * flag */
-+ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
-+ ifxhcd->flags.b.port_connect_status_change = 0;
-+ break;
-+ case USB_PORT_FEAT_C_RESET:
-+ /* Clears the driver's internal Port Reset Change
-+ * flag */
-+ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_RESET\n");
-+ ifxhcd->flags.b.port_reset_change = 0;
-+ break;
-+ case USB_PORT_FEAT_C_ENABLE:
-+ /* Clears the driver's internal Port
-+ * Enable/Disable Change flag */
-+ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
-+ ifxhcd->flags.b.port_enable_change = 0;
-+ break;
-+ case USB_PORT_FEAT_C_SUSPEND:
-+ /* Clears the driver's internal Port Suspend
-+ * Change flag, which is set when resume signaling on
-+ * the host port is complete */
-+ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
-+ ifxhcd->flags.b.port_suspend_change = 0;
-+ break;
-+ case USB_PORT_FEAT_C_OVER_CURRENT:
-+ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
-+ ifxhcd->flags.b.port_over_current_change = 0;
-+ break;
-+ default:
-+ retval = -EINVAL;
-+ IFX_ERROR ("IFXUSB HCD - "
-+ "ClearPortFeature request %xh "
-+ "unknown or unsupported\n", _wValue);
-+ }
-+ break;
-+ case GetHubDescriptor:
-+ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
-+ "GetHubDescriptor\n");
-+ desc = (struct usb_hub_descriptor *)_buf;
-+ desc->bDescLength = 9;
-+ desc->bDescriptorType = 0x29;
-+ desc->bNbrPorts = 1;
-+ desc->wHubCharacteristics = 0x08;
-+ desc->bPwrOn2PwrGood = 1;
-+ desc->bHubContrCurrent = 0;
-+// desc->bitmap[0] = 0;
-+// desc->bitmap[1] = 0xff;
-+ break;
-+ case GetHubStatus:
-+ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
-+ "GetHubStatus\n");
-+ memset (_buf, 0, 4);
-+ break;
-+ case GetPortStatus:
-+ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
-+ "GetPortStatus\n");
-+ if (!_wIndex || _wIndex > 1)
-+ goto error;
-+
-+# ifdef CONFIG_AVM_POWERMETER
-+ {
-+ /* first port only, but 2 Hosts */
-+ static unsigned char ucOldPower1 = 255;
-+ static unsigned char ucOldPower2 = 255;
-+
-+ unsigned char ucNewPower = 0;
-+ struct usb_device *childdev = _syshcd->self.root_hub->children[0];
-+
-+ if (childdev != NULL) {
-+ ucNewPower = (childdev->actconfig != NULL)
-+ ? childdev->actconfig->desc.bMaxPower
-+ : 50;/* default: 50 means 100 mA*/
-+ }
-+ if (_syshcd->self.busnum == 1) {
-+ if (ucOldPower1 != ucNewPower) {
-+ ucOldPower1 = ucNewPower;
-+ printk (KERN_INFO "IFXHCD#1: AVM Powermeter changed to %u mA\n", ucNewPower*2);
-+ PowerManagmentRessourceInfo(powerdevice_usb_host, ucNewPower*2);
-+ }
-+ } else {
-+ if (ucOldPower2 != ucNewPower) {
-+ ucOldPower2 = ucNewPower;
-+ printk (KERN_INFO "IFXHCD#2: AVM Powermeter changed to %u mA\n", ucNewPower*2);
-+ PowerManagmentRessourceInfo(powerdevice_usb_host2, ucNewPower*2);
-+ }
-+ }
-+ }
-+# endif /*--- #ifdef CONFIG_AVM_POWERMETER ---*/
-+
-+ port_status = 0;
-+ if (ifxhcd->flags.b.port_connect_status_change)
-+ port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
-+ if (ifxhcd->flags.b.port_enable_change)
-+ port_status |= (1 << USB_PORT_FEAT_C_ENABLE);
-+ if (ifxhcd->flags.b.port_suspend_change)
-+ port_status |= (1 << USB_PORT_FEAT_C_SUSPEND);
-+ if (ifxhcd->flags.b.port_reset_change)
-+ port_status |= (1 << USB_PORT_FEAT_C_RESET);
-+ if (ifxhcd->flags.b.port_over_current_change)
-+ {
-+ IFX_ERROR("Device Not Supported\n");
-+ port_status |= (1 << USB_PORT_FEAT_C_OVER_CURRENT);
-+ }
-+ if (!ifxhcd->flags.b.port_connect_status)
-+ {
-+ /*
-+ * The port is disconnected, which means the core is
-+ * either in device mode or it soon will be. Just
-+ * return 0's for the remainder of the port status
-+ * since the port register can't be read if the core
-+ * is in device mode.
-+ */
-+ *((u32 *) _buf) = cpu_to_le32(port_status);
-+ break;
-+ }
-+
-+ hprt0.d32 = ifxusb_rreg(core_if->hprt0);
-+ IFX_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hprt0.d32);
-+ if (hprt0.b.prtconnsts)
-+ port_status |= (1 << USB_PORT_FEAT_CONNECTION);
-+ if (hprt0.b.prtena)
-+ port_status |= (1 << USB_PORT_FEAT_ENABLE);
-+ if (hprt0.b.prtsusp)
-+ port_status |= (1 << USB_PORT_FEAT_SUSPEND);
-+ if (hprt0.b.prtovrcurract)
-+ port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT);
-+ if (hprt0.b.prtrst)
-+ port_status |= (1 << USB_PORT_FEAT_RESET);
-+ if (hprt0.b.prtpwr)
-+ port_status |= (1 << USB_PORT_FEAT_POWER);
-+/* if (hprt0.b.prtspd == IFXUSB_HPRT0_PRTSPD_HIGH_SPEED)
-+ port_status |= (1 << USB_PORT_FEAT_HIGHSPEED);
-+ else if (hprt0.b.prtspd == IFXUSB_HPRT0_PRTSPD_LOW_SPEED)
-+ port_status |= (1 << USB_PORT_FEAT_LOWSPEED);*/
-+ if (hprt0.b.prttstctl)
-+ port_status |= (1 << USB_PORT_FEAT_TEST);
-+ /* USB_PORT_FEAT_INDICATOR unsupported always 0 */
-+ *((u32 *) _buf) = cpu_to_le32(port_status);
-+ break;
-+ case SetHubFeature:
-+ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
-+ "SetHubFeature\n");
-+ /* No HUB features supported */
-+ break;
-+ case SetPortFeature:
-+ if (_wValue != USB_PORT_FEAT_TEST && (!_wIndex || _wIndex > 1))
-+ goto error;
-+ /*
-+ * The port is disconnected, which means the core is
-+ * either in device mode or it soon will be. Just
-+ * return without doing anything since the port
-+ * register can't be written if the core is in device
-+ * mode.
-+ */
-+ if (!ifxhcd->flags.b.port_connect_status)
-+ break;
-+ switch (_wValue)
-+ {
-+ case USB_PORT_FEAT_SUSPEND:
-+ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
-+ hprt0.d32 = ifxusb_read_hprt0 (core_if);
-+ hprt0.b.prtsusp = 1;
-+ ifxusb_wreg(core_if->hprt0, hprt0.d32);
-+ //IFX_PRINT( "SUSPEND: HPRT0=%0x\n", hprt0.d32);
-+ /* Suspend the Phy Clock */
-+ {
-+ pcgcctl_data_t pcgcctl = {.d32=0};
-+ pcgcctl.b.stoppclk = 1;
-+ ifxusb_wreg(core_if->pcgcctl, pcgcctl.d32);
-+ }
-+ break;
-+ case USB_PORT_FEAT_POWER:
-+ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_POWER\n");
-+ ifxusb_vbus_on (core_if);
-+ hprt0.d32 = ifxusb_read_hprt0 (core_if);
-+ hprt0.b.prtpwr = 1;
-+ ifxusb_wreg(core_if->hprt0, hprt0.d32);
-+ break;
-+ case USB_PORT_FEAT_RESET:
-+ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_RESET\n");
-+ hprt0.d32 = ifxusb_read_hprt0 (core_if);
-+ hprt0.b.prtrst = 1;
-+ ifxusb_wreg(core_if->hprt0, hprt0.d32);
-+ /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
-+ MDELAY (60);
-+ hprt0.b.prtrst = 0;
-+ ifxusb_wreg(core_if->hprt0, hprt0.d32);
-+ break;
-+ #ifdef __WITH_HS_ELECT_TST__
-+ case USB_PORT_FEAT_TEST:
-+ {
-+ uint32_t t;
-+ gint_data_t gintmsk;
-+ t = (_wIndex >> 8); /* MSB wIndex USB */
-+ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_TEST %d\n", t);
-+ warn("USB_PORT_FEAT_TEST %d\n", t);
-+ if (t < 6)
-+ {
-+ hprt0.d32 = ifxusb_read_hprt0 (core_if);
-+ hprt0.b.prttstctl = t;
-+ ifxusb_wreg(core_if->hprt0, hprt0.d32);
-+ }
-+ else if (t == 6) /* HS_HOST_PORT_SUSPEND_RESUME */
-+ {
-+ /* Save current interrupt mask */
-+ gintmsk.d32 = ifxusb_rreg(&core_if->core_global_regs->gintmsk);
-+
-+ /* Disable all interrupts while we muck with
-+ * the hardware directly
-+ */
-+ ifxusb_wreg(&core_if->core_global_regs->gintmsk, 0);
-+
-+ /* 15 second delay per the test spec */
-+ mdelay(15000);
-+
-+ /* Drive suspend on the root port */
-+ hprt0.d32 = ifxusb_read_hprt0 (core_if);
-+ hprt0.b.prtsusp = 1;
-+ hprt0.b.prtres = 0;
-+ ifxusb_wreg(core_if->hprt0, hprt0.d32);
-+
-+ /* 15 second delay per the test spec */
-+ mdelay(15000);
-+
-+ /* Drive resume on the root port */
-+ hprt0.d32 = ifxusb_read_hprt0 (core_if);
-+ hprt0.b.prtsusp = 0;
-+ hprt0.b.prtres = 1;
-+ ifxusb_wreg(core_if->hprt0, hprt0.d32);
-+ mdelay(100);
-+
-+ /* Clear the resume bit */
-+ hprt0.b.prtres = 0;
-+ ifxusb_wreg(core_if->hprt0, hprt0.d32);
-+
-+ /* Restore interrupts */
-+ ifxusb_wreg(&core_if->core_global_regs->gintmsk, gintmsk.d32);
-+ }
-+ else if (t == 7) /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */
-+ {
-+ /* Save current interrupt mask */
-+ gintmsk.d32 = ifxusb_rreg(&core_if->core_global_regs->gintmsk);
-+
-+ /* Disable all interrupts while we muck with
-+ * the hardware directly
-+ */
-+ ifxusb_wreg(&core_if->core_global_regs->gintmsk, 0);
-+
-+ /* 15 second delay per the test spec */
-+ mdelay(15000);
-+
-+ /* Send the Setup packet */
-+ do_setup(core_if);
-+
-+ /* 15 second delay so nothing else happens for awhile */
-+ mdelay(15000);
-+
-+ /* Restore interrupts */
-+ ifxusb_wreg(&core_if->core_global_regs->gintmsk, gintmsk.d32);
-+ }
-+
-+ else if (t == 8) /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */
-+ {
-+ /* Save current interrupt mask */
-+ gintmsk.d32 = ifxusb_rreg(&core_if->core_global_regs->gintmsk);
-+
-+ /* Disable all interrupts while we muck with
-+ * the hardware directly
-+ */
-+ ifxusb_wreg(&core_if->core_global_regs->gintmsk, 0);
-+
-+ /* Send the Setup packet */
-+ do_setup(core_if);
-+
-+ /* 15 second delay so nothing else happens for awhile */
-+ mdelay(15000);
-+
-+ /* Send the In and Ack packets */
-+ do_in_ack(core_if);
-+
-+ /* 15 second delay so nothing else happens for awhile */
-+ mdelay(15000);
-+
-+ /* Restore interrupts */
-+ ifxusb_wreg(&core_if->core_global_regs->gintmsk, gintmsk.d32);
-+ }
-+ }
-+ break;
-+ #endif //__WITH_HS_ELECT_TST__
-+ case USB_PORT_FEAT_INDICATOR:
-+ IFX_DEBUGPL (DBG_HCD, "IFXUSB HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
-+ /* Not supported */
-+ break;
-+ default:
-+ retval = -EINVAL;
-+ IFX_ERROR ("IFXUSB HCD - "
-+ "SetPortFeature request %xh "
-+ "unknown or unsupported\n", _wValue);
-+ }
-+ break;
-+ default:
-+ error:
-+ retval = -EINVAL;
-+ IFX_WARN ("IFXUSB HCD - "
-+ "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n",
-+ _typeReq, _wIndex, _wValue);
-+ }
-+ return retval;
-+}
-+
-+
-+/*!
-+ \brief Assigns transactions from a URBD to a free host channel and initializes the
-+ host channel to perform the transactions. The host channel is removed from
-+ the free list.
-+ \param _ifxhcd The HCD state structure.
-+ \param _epqh Transactions from the first URBD for this EPQH are selected and assigned to a free host channel.
-+ */
-+static int assign_and_init_hc(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh)
-+{
-+ ifxhcd_hc_t *ifxhc;
-+ ifxhcd_urbd_t *urbd;
-+ struct urb *urb;
-+
-+ IFX_DEBUGPL(DBG_HCDV, "%s(%p,%p)\n", __func__, _ifxhcd, _epqh);
-+
-+ if(list_empty(&_epqh->urbd_list))
-+ return 0;
-+
-+ ifxhc = list_entry(_ifxhcd->free_hc_list.next, ifxhcd_hc_t, hc_list_entry);
-+ /* Remove the host channel from the free list. */
-+ list_del_init(&ifxhc->hc_list_entry);
-+
-+ urbd = list_entry(_epqh->urbd_list.next, ifxhcd_urbd_t, urbd_list_entry);
-+ urb = urbd->urb;
-+
-+ _epqh->hc = ifxhc;
-+ _epqh->urbd = urbd;
-+ ifxhc->epqh = _epqh;
-+
-+ urbd->is_active=1;
-+
-+ /*
-+ * Use usb_pipedevice to determine device address. This address is
-+ * 0 before the SET_ADDRESS command and the correct address afterward.
-+ */
-+ ifxhc->dev_addr = usb_pipedevice(urb->pipe);
-+ ifxhc->ep_num = usb_pipeendpoint(urb->pipe);
-+
-+ ifxhc->xfer_started = 0;
-+
-+ if (urb->dev->speed == USB_SPEED_LOW) ifxhc->speed = IFXUSB_EP_SPEED_LOW;
-+ else if (urb->dev->speed == USB_SPEED_FULL) ifxhc->speed = IFXUSB_EP_SPEED_FULL;
-+ else ifxhc->speed = IFXUSB_EP_SPEED_HIGH;
-+
-+ ifxhc->mps = _epqh->mps;
-+ ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
-+
-+ ifxhc->ep_type = _epqh->ep_type;
-+
-+ if(_epqh->ep_type==IFXUSB_EP_TYPE_CTRL)
-+ {
-+ ifxhc->control_phase=IFXHCD_CONTROL_SETUP;
-+ ifxhc->is_in = 0;
-+ ifxhc->data_pid_start = IFXUSB_HC_PID_SETUP;
-+ ifxhc->xfer_buff = urbd->setup_buff;
-+ ifxhc->xfer_len = 8;
-+ ifxhc->xfer_count = 0;
-+ ifxhc->short_rw =(urb->transfer_flags & URB_ZERO_PACKET)?1:0;
-+ }
-+ else
-+ {
-+ ifxhc->is_in = urbd->is_in;
-+ ifxhc->xfer_buff = urbd->xfer_buff;
-+ ifxhc->xfer_len = urbd->xfer_len;
-+ ifxhc->xfer_count = 0;
-+ /* == AVM/WK 20100710 Fix - Use toggle of usbcore ==*/
-+ //ifxhc->data_pid_start = _epqh->data_toggle;
-+ ifxhc->data_pid_start = usb_gettoggle (urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout (urb->pipe))
-+ ? IFXUSB_HC_PID_DATA1
-+ : IFXUSB_HC_PID_DATA0;
-+ if(ifxhc->is_in)
-+ ifxhc->short_rw =0;
-+ else
-+ ifxhc->short_rw =(urb->transfer_flags & URB_ZERO_PACKET)?1:0;
-+
-+ #ifdef __EN_ISOC__
-+ if(_epqh->ep_type==IFXUSB_EP_TYPE_ISOC)
-+ {
-+ struct usb_iso_packet_descriptor *frame_desc;
-+ frame_desc = &urb->iso_frame_desc[urbd->isoc_frame_index];
-+ ifxhc->xfer_buff += frame_desc->offset + urbd->isoc_split_offset;
-+ ifxhc->xfer_len = frame_desc->length - urbd->isoc_split_offset;
-+ if (ifxhc->isoc_xact_pos == IFXUSB_HCSPLIT_XACTPOS_ALL)
-+ {
-+ if (ifxhc->xfer_len <= 188)
-+ ifxhc->isoc_xact_pos = IFXUSB_HCSPLIT_XACTPOS_ALL;
-+ else
-+ ifxhc->isoc_xact_pos = IFXUSB_HCSPLIT_XACTPOS_BEGIN;
-+ }
-+ }
-+ #endif
-+ }
-+
-+ ifxhc->do_ping=0;
-+ if (_ifxhcd->core_if.snpsid < 0x4f54271a && ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
-+ ifxhc->do_ping=1;
-+
-+
-+ /* Set the split attributes */
-+ ifxhc->split = 0;
-+ if (_epqh->need_split) {
-+ ifxhc->split = 1;
-+ ifxhc->hub_addr = urb->dev->tt->hub->devnum;
-+ ifxhc->port_addr = urb->dev->ttport;
-+ }
-+
-+ //ifxhc->uint16_t pkt_count_limit
-+
-+ {
-+ hcint_data_t hc_intr_mask;
-+ uint8_t hc_num = ifxhc->hc_num;
-+ ifxusb_hc_regs_t *hc_regs = _ifxhcd->core_if.hc_regs[hc_num];
-+
-+ /* Clear old interrupt conditions for this host channel. */
-+ hc_intr_mask.d32 = 0xFFFFFFFF;
-+ hc_intr_mask.b.reserved = 0;
-+ ifxusb_wreg(&hc_regs->hcint, hc_intr_mask.d32);
-+
-+ /* Enable channel interrupts required for this transfer. */
-+ hc_intr_mask.d32 = 0;
-+ hc_intr_mask.b.chhltd = 1;
-+ hc_intr_mask.b.ahberr = 1;
-+
-+ ifxusb_wreg(&hc_regs->hcintmsk, hc_intr_mask.d32);
-+
-+ /* Enable the top level host channel interrupt. */
-+ {
-+ uint32_t intr_enable;
-+ intr_enable = (1 << hc_num);
-+ ifxusb_mreg(&_ifxhcd->core_if.host_global_regs->haintmsk, 0, intr_enable);
-+ }
-+
-+ /* Make sure host channel interrupts are enabled. */
-+ {
-+ gint_data_t gintmsk ={.d32 = 0};
-+ gintmsk.b.hcintr = 1;
-+ ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk, 0, gintmsk.d32);
-+ }
-+
-+ /*
-+ * Program the HCCHARn register with the endpoint characteristics for
-+ * the current transfer.
-+ */
-+ {
-+ hcchar_data_t hcchar;
-+
-+ hcchar.d32 = 0;
-+ hcchar.b.devaddr = ifxhc->dev_addr;
-+ hcchar.b.epnum = ifxhc->ep_num;
-+ hcchar.b.lspddev = (ifxhc->speed == IFXUSB_EP_SPEED_LOW);
-+ hcchar.b.eptype = ifxhc->ep_type;
-+ hcchar.b.mps = ifxhc->mps;
-+ ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
-+
-+ IFX_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, ifxhc->hc_num);
-+ IFX_DEBUGPL(DBG_HCDV, " Dev Addr: %d\n" , hcchar.b.devaddr);
-+ IFX_DEBUGPL(DBG_HCDV, " Ep Num: %d\n" , hcchar.b.epnum);
-+ IFX_DEBUGPL(DBG_HCDV, " Is Low Speed: %d\n", hcchar.b.lspddev);
-+ IFX_DEBUGPL(DBG_HCDV, " Ep Type: %d\n" , hcchar.b.eptype);
-+ IFX_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n" , hcchar.b.mps);
-+ IFX_DEBUGPL(DBG_HCDV, " Multi Cnt: %d\n" , hcchar.b.multicnt);
-+ }
-+ /* Program the HCSPLIT register for SPLITs */
-+ {
-+ hcsplt_data_t hcsplt;
-+
-+ hcsplt.d32 = 0;
-+ if (ifxhc->split)
-+ {
-+ IFX_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", ifxhc->hc_num,
-+ (ifxhc->split==2) ? "CSPLIT" : "SSPLIT");
-+ hcsplt.b.spltena = 1;
-+ hcsplt.b.compsplt = (ifxhc->split==2);
-+ #ifdef __EN_ISOC__
-+ if(_epqh->ep_type==IFXUSB_EP_TYPE_ISOC)
-+ hcsplt.b.xactpos = ifxhc->isoc_xact_pos;
-+ else
-+ #endif
-+ hcsplt.b.xactpos = IFXUSB_HCSPLIT_XACTPOS_ALL;
-+ hcsplt.b.hubaddr = ifxhc->hub_addr;
-+ hcsplt.b.prtaddr = ifxhc->port_addr;
-+ IFX_DEBUGPL(DBG_HCDV, " comp split %d\n" , hcsplt.b.compsplt);
-+ IFX_DEBUGPL(DBG_HCDV, " xact pos %d\n" , hcsplt.b.xactpos);
-+ IFX_DEBUGPL(DBG_HCDV, " hub addr %d\n" , hcsplt.b.hubaddr);
-+ IFX_DEBUGPL(DBG_HCDV, " port addr %d\n" , hcsplt.b.prtaddr);
-+ IFX_DEBUGPL(DBG_HCDV, " is_in %d\n" , ifxhc->is_in);
-+ IFX_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n" , ifxhc->mps);
-+ IFX_DEBUGPL(DBG_HCDV, " xferlen: %d\n" , ifxhc->xfer_len);
-+ }
-+ ifxusb_wreg(&hc_regs->hcsplt, hcsplt.d32);
-+ }
-+ }
-+
-+ ifxhc->nak_retry_r=ifxhc->nak_retry=0;
-+ ifxhc->nak_countdown_r=ifxhc->nak_countdown=0;
-+
-+ if (ifxhc->split)
-+ {
-+ if(ifxhc->is_in)
-+ {
-+ }
-+ else
-+ {
-+ }
-+ }
-+ else if(_epqh->ep_type==IFXUSB_EP_TYPE_CTRL)
-+ {
-+ if(ifxhc->is_in)
-+ {
-+ }
-+ else
-+ {
-+ }
-+ }
-+ else if(_epqh->ep_type==IFXUSB_EP_TYPE_BULK)
-+ {
-+ if(ifxhc->is_in)
-+ {
-+// ifxhc->nak_retry_r=ifxhc->nak_retry=nak_retry_max;
-+// ifxhc->nak_countdown_r=ifxhc->nak_countdown=nak_countdown_max;
-+ }
-+ else
-+ {
-+ }
-+ }
-+ else if(_epqh->ep_type==IFXUSB_EP_TYPE_INTR)
-+ {
-+ if(ifxhc->is_in)
-+ {
-+ }
-+ else
-+ {
-+ }
-+ }
-+ else if(_epqh->ep_type==IFXUSB_EP_TYPE_ISOC)
-+ {
-+ if(ifxhc->is_in)
-+ {
-+ }
-+ else
-+ {
-+ }
-+ }
-+
-+ return 1;
-+}
-+
-+/*!
-+ \brief This function selects transactions from the HCD transfer schedule and
-+ assigns them to available host channels. It is called from HCD interrupt
-+ handler functions.
-+ */
-+static void select_eps_sub(ifxhcd_hcd_t *_ifxhcd)
-+{
-+ struct list_head *epqh_ptr;
-+ struct list_head *urbd_ptr;
-+ ifxhcd_epqh_t *epqh;
-+ ifxhcd_urbd_t *urbd;
-+ int ret_val=0;
-+
-+ /*== AVM/BC 20101111 Function called with Lock ==*/
-+
-+// #ifdef __DEBUG__
-+// IFX_DEBUGPL(DBG_HCD, " ifxhcd_select_ep\n");
-+// #endif
-+
-+ /* Process entries in the periodic ready list. */
-+ #ifdef __EN_ISOC__
-+ epqh_ptr = _ifxhcd->epqh_isoc_ready.next;
-+ while (epqh_ptr != &_ifxhcd->epqh_isoc_ready && !list_empty(&_ifxhcd->free_hc_list))
-+ {
-+ epqh = list_entry(epqh_ptr, ifxhcd_epqh_t, epqh_list_entry);
-+ epqh_ptr = epqh_ptr->next;
-+ if(epqh->period_do)
-+ {
-+ if(assign_and_init_hc(_ifxhcd, epqh))
-+ {
-+ IFX_DEBUGPL(DBG_HCD, " select_eps ISOC\n");
-+ list_move_tail(&epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_active);
-+ epqh->is_active=1;
-+ ret_val=1;
-+ epqh->period_do=0;
-+ }
-+ }
-+ }
-+ #endif
-+
-+ epqh_ptr = _ifxhcd->epqh_intr_ready.next;
-+ while (epqh_ptr != &_ifxhcd->epqh_intr_ready && !list_empty(&_ifxhcd->free_hc_list))
-+ {
-+ epqh = list_entry(epqh_ptr, ifxhcd_epqh_t, epqh_list_entry);
-+ epqh_ptr = epqh_ptr->next;
-+ if(epqh->period_do)
-+ {
-+ if(assign_and_init_hc(_ifxhcd, epqh))
-+ {
-+ IFX_DEBUGPL(DBG_HCD, " select_eps INTR\n");
-+ list_move_tail(&epqh->epqh_list_entry, &_ifxhcd->epqh_intr_active);
-+ epqh->is_active=1;
-+ ret_val=1;
-+ epqh->period_do=0;
-+ }
-+ }
-+ }
-+
-+ epqh_ptr = _ifxhcd->epqh_np_ready.next;
-+ while (epqh_ptr != &_ifxhcd->epqh_np_ready && !list_empty(&_ifxhcd->free_hc_list)) // may need to preserve at lease one for period
-+ {
-+ epqh = list_entry(epqh_ptr, ifxhcd_epqh_t, epqh_list_entry);
-+ epqh_ptr = epqh_ptr->next;
-+ if(assign_and_init_hc(_ifxhcd, epqh))
-+ {
-+ IFX_DEBUGPL(DBG_HCD, " select_eps CTRL/BULK\n");
-+ list_move_tail(&epqh->epqh_list_entry, &_ifxhcd->epqh_np_active);
-+ epqh->is_active=1;
-+ ret_val=1;
-+ }
-+ }
-+ if(ret_val)
-+ /*== AVM/BC 20101111 Function called with Lock ==*/
-+ process_channels_sub(_ifxhcd);
-+
-+ /* AVM/BC 20101111 Urbds completion loop */
-+ while (!list_empty(&_ifxhcd->urbd_complete_list))
-+ {
-+ urbd_ptr = _ifxhcd->urbd_complete_list.next;
-+ list_del_init(urbd_ptr);
-+
-+ urbd = list_entry(urbd_ptr, ifxhcd_urbd_t, urbd_list_entry);
-+
-+ ifxhcd_complete_urb(_ifxhcd, urbd, urbd->status);
-+
-+ }
-+
-+}
-+
-+static void select_eps_func(unsigned long data)
-+{
-+ unsigned long flags;
-+
-+ ifxhcd_hcd_t *ifxhcd;
-+ ifxhcd=((ifxhcd_hcd_t *)data);
-+
-+ /* AVM/BC 20101111 select_eps_in_use flag removed */
-+
-+ SPIN_LOCK_IRQSAVE(&ifxhcd->lock, flags);
-+
-+ /*if(ifxhcd->select_eps_in_use){
-+ SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
-+ return;
-+ }
-+ ifxhcd->select_eps_in_use=1;
-+ */
-+
-+ select_eps_sub(ifxhcd);
-+
-+ //ifxhcd->select_eps_in_use=0;
-+
-+ SPIN_UNLOCK_IRQRESTORE(&ifxhcd->lock, flags);
-+}
-+
-+void select_eps(ifxhcd_hcd_t *_ifxhcd)
-+{
-+ if(in_irq())
-+ {
-+ if(!_ifxhcd->select_eps.func)
-+ {
-+ _ifxhcd->select_eps.next = NULL;
-+ _ifxhcd->select_eps.state = 0;
-+ atomic_set( &_ifxhcd->select_eps.count, 0);
-+ _ifxhcd->select_eps.func = select_eps_func;
-+ _ifxhcd->select_eps.data = (unsigned long)_ifxhcd;
-+ }
-+ tasklet_schedule(&_ifxhcd->select_eps);
-+ }
-+ else
-+ {
-+ unsigned long flags;
-+
-+ /* AVM/BC 20101111 select_eps_in_use flag removed */
-+
-+ SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
-+
-+ /*if(_ifxhcd->select_eps_in_use){
-+ printk ("select_eps non_irq: busy\n");
-+ SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
-+ return;
-+ }
-+ _ifxhcd->select_eps_in_use=1;
-+ */
-+
-+ select_eps_sub(_ifxhcd);
-+
-+ //_ifxhcd->select_eps_in_use=0;
-+
-+ SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
-+ }
-+}
-+
-+/*!
-+ \brief
-+ */
-+static void process_unaligned( ifxhcd_epqh_t *_epqh)
-+{
-+ #if defined(__UNALIGNED_BUFFER_ADJ__)
-+ if(!_epqh->aligned_checked)
-+ {
-+ uint32_t xfer_len;
-+ xfer_len=_epqh->urbd->xfer_len;
-+ if(_epqh->urbd->is_in && xfer_len<_epqh->mps)
-+ xfer_len = _epqh->mps;
-+ _epqh->using_aligned_buf=0;
-+
-+ if(xfer_len > 0 && ((unsigned long)_epqh->urbd->xfer_buff) & 3)
-+ {
-+ if( _epqh->aligned_buf
-+ && _epqh->aligned_buf_len > 0
-+ && _epqh->aligned_buf_len < xfer_len
-+ )
-+ {
-+ ifxusb_free_buf(_epqh->aligned_buf);
-+ _epqh->aligned_buf=NULL;
-+ _epqh->aligned_buf_len=0;
-+ }
-+ if(! _epqh->aligned_buf || ! _epqh->aligned_buf_len)
-+ {
-+ _epqh->aligned_buf = ifxusb_alloc_buf(xfer_len, _epqh->urbd->is_in);
-+ if(_epqh->aligned_buf)
-+ _epqh->aligned_buf_len = xfer_len;
-+ }
-+ if(_epqh->aligned_buf)
-+ {
-+ if(!_epqh->urbd->is_in)
-+ memcpy(_epqh->aligned_buf, _epqh->urbd->xfer_buff, xfer_len);
-+ _epqh->using_aligned_buf=1;
-+ _epqh->hc->xfer_buff = _epqh->aligned_buf;
-+ }
-+ else
-+ IFX_WARN("%s():%d\n",__func__,__LINE__);
-+ }
-+ if(_epqh->ep_type==IFXUSB_EP_TYPE_CTRL)
-+ {
-+ _epqh->using_aligned_setup=0;
-+ if(((unsigned long)_epqh->urbd->setup_buff) & 3)
-+ {
-+ if(! _epqh->aligned_setup)
-+ _epqh->aligned_setup = ifxusb_alloc_buf(8,0);
-+ if(_epqh->aligned_setup)
-+ {
-+ memcpy(_epqh->aligned_setup, _epqh->urbd->setup_buff, 8);
-+ _epqh->using_aligned_setup=1;
-+ }
-+ else
-+ IFX_WARN("%s():%d\n",__func__,__LINE__);
-+ _epqh->hc->xfer_buff = _epqh->aligned_setup;
-+ }
-+ }
-+ }
-+ #elif defined(__UNALIGNED_BUFFER_CHK__)
-+ if(!_epqh->aligned_checked)
-+ {
-+ if(_epqh->urbd->is_in)
-+ {
-+ if(_epqh->urbd->xfer_len==0)
-+ IFX_WARN("%s():%d IN xfer while length is zero \n",__func__,__LINE__);
-+ else{
-+ if(_epqh->urbd->xfer_len < _epqh->mps)
-+ IFX_WARN("%s():%d IN xfer while length < mps \n",__func__,__LINE__);
-+
-+ if(((unsigned long)_epqh->urbd->xfer_buff) & 3)
-+ IFX_WARN("%s():%d IN xfer Buffer UNALIGNED\n",__func__,__LINE__);
-+ }
-+ }
-+ else
-+ {
-+ if(_epqh->urbd->xfer_len > 0 && (((unsigned long)_epqh->urbd->xfer_buff) & 3) )
-+ IFX_WARN("%s():%d OUT xfer Buffer UNALIGNED\n",__func__,__LINE__);
-+ }
-+
-+ if(_epqh->ep_type==IFXUSB_EP_TYPE_CTRL)
-+ {
-+ if(((unsigned long)_epqh->urbd->setup_buff) & 3)
-+ IFX_WARN("%s():%d SETUP xfer Buffer UNALIGNED\n",__func__,__LINE__);
-+ }
-+ }
-+ #endif
-+ _epqh->aligned_checked=1;
-+}
-+
-+
-+/*!
-+ \brief
-+ */
-+void process_channels_sub(ifxhcd_hcd_t *_ifxhcd)
-+{
-+ ifxhcd_epqh_t *epqh;
-+ struct list_head *epqh_item;
-+ struct ifxhcd_hc *hc;
-+
-+ #ifdef __EN_ISOC__
-+ if (!list_empty(&_ifxhcd->epqh_isoc_active))
-+ {
-+ for (epqh_item = _ifxhcd->epqh_isoc_active.next;
-+ epqh_item != &_ifxhcd->epqh_isoc_active;
-+ )
-+ {
-+ epqh = list_entry(epqh_item, ifxhcd_epqh_t, epqh_list_entry);
-+ epqh_item = epqh_item->next;
-+ hc=epqh->hc;
-+ if(hc && !hc->xfer_started && epqh->period_do)
-+ {
-+ if(hc->split==0
-+ || hc->split==1
-+ )
-+ {
-+ //epqh->ping_state = 0;
-+ process_unaligned(epqh);
-+ hc->wait_for_sof=epqh->wait_for_sof;
-+ epqh->wait_for_sof=0;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, hc);
-+ epqh->period_do=0;
-+ {
-+ gint_data_t gintsts = {.d32 = 0};
-+ gintsts.b.sofintr = 1;
-+ ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk,0, gintsts.d32);
-+ }
-+ }
-+ }
-+ }
-+ }
-+ #endif
-+
-+ if (!list_empty(&_ifxhcd->epqh_intr_active))
-+ {
-+ for (epqh_item = _ifxhcd->epqh_intr_active.next;
-+ epqh_item != &_ifxhcd->epqh_intr_active;
-+ )
-+ {
-+ epqh = list_entry(epqh_item, ifxhcd_epqh_t, epqh_list_entry);
-+ epqh_item = epqh_item->next;
-+ hc=epqh->hc;
-+ if(hc && !hc->xfer_started && epqh->period_do)
-+ {
-+ if(hc->split==0
-+ || hc->split==1
-+ )
-+ {
-+ //epqh->ping_state = 0;
-+ process_unaligned(epqh);
-+ hc->wait_for_sof=epqh->wait_for_sof;
-+ epqh->wait_for_sof=0;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, hc);
-+ epqh->period_do=0;
-+#ifdef __USE_TIMER_4_SOF__
-+ /* AVM/WK change: let hc_start decide, if irq is needed */
-+#else
-+ {
-+ gint_data_t gintsts = {.d32 = 0};
-+ gintsts.b.sofintr = 1;
-+ ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk,0, gintsts.d32);
-+ }
-+#endif
-+ }
-+ }
-+
-+ }
-+ }
-+
-+ if (!list_empty(&_ifxhcd->epqh_np_active))
-+ {
-+ for (epqh_item = _ifxhcd->epqh_np_active.next;
-+ epqh_item != &_ifxhcd->epqh_np_active;
-+ )
-+ {
-+ epqh = list_entry(epqh_item, ifxhcd_epqh_t, epqh_list_entry);
-+ epqh_item = epqh_item->next;
-+ hc=epqh->hc;
-+ if(hc)
-+ {
-+ if(!hc->xfer_started)
-+ {
-+ if(hc->split==0
-+ || hc->split==1
-+ //|| hc->split_counter == 0
-+ )
-+ {
-+ //epqh->ping_state = 0;
-+ process_unaligned(epqh);
-+ hc->wait_for_sof=epqh->wait_for_sof;
-+ epqh->wait_for_sof=0;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, hc);
-+ }
-+ }
-+ }
-+ }
-+ }
-+}
-+
-+void process_channels(ifxhcd_hcd_t *_ifxhcd)
-+{
-+ unsigned long flags;
-+
-+ /* AVM/WK Fix: use spin_lock instead busy flag
-+ **/
-+ SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
-+
-+ //if(_ifxhcd->process_channels_in_use)
-+ // return;
-+ //_ifxhcd->process_channels_in_use=1;
-+
-+ process_channels_sub(_ifxhcd);
-+ //_ifxhcd->process_channels_in_use=0;
-+ SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
-+}
-+
-+
-+#ifdef __HC_XFER_TIMEOUT__
-+ static void hc_xfer_timeout(unsigned long _ptr)
-+ {
-+ hc_xfer_info_t *xfer_info = (hc_xfer_info_t *)_ptr;
-+ int hc_num = xfer_info->hc->hc_num;
-+ IFX_WARN("%s: timeout on channel %d\n", __func__, hc_num);
-+ IFX_WARN(" start_hcchar_val 0x%08x\n", xfer_info->hc->start_hcchar_val);
-+ }
-+#endif
-+
-+void ifxhcd_hc_dumb_rx(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc,uint8_t *dump_buf)
-+{
-+ ifxusb_hc_regs_t *hc_regs = _core_if->hc_regs[_ifxhc->hc_num];
-+ hctsiz_data_t hctsiz= { .d32=0 };
-+ hcchar_data_t hcchar;
-+
-+
-+ _ifxhc->xfer_len = _ifxhc->mps;
-+ hctsiz.b.xfersize = _ifxhc->mps;
-+ hctsiz.b.pktcnt = 0;
-+ hctsiz.b.pid = _ifxhc->data_pid_start;
-+ ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ ifxusb_wreg(&hc_regs->hcdma, (uint32_t)(CPHYSADDR( ((uint32_t)(dump_buf)))));
-+
-+ {
-+ hcint_data_t hcint= { .d32=0 };
-+// hcint.b.nak =1;
-+// hcint.b.nyet=1;
-+// hcint.b.ack =1;
-+ hcint.d32 =0xFFFFFFFF;
-+ ifxusb_wreg(&hc_regs->hcint, hcint.d32);
-+ }
-+
-+ /* Set host channel enable after all other setup is complete. */
-+ hcchar.b.chen = 1;
-+ hcchar.b.chdis = 0;
-+ hcchar.b.epdir = 1;
-+ IFX_DEBUGPL(DBG_HCDV, " HCCHART: 0x%08x\n", hcchar.d32);
-+ ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
-+}
-+
-+/*!
-+ \brief This function trigger a data transfer for a host channel and
-+ starts the transfer.
-+
-+ For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
-+ register along with a packet count of 1 and the channel is enabled. This
-+ causes a single PING transaction to occur. Other fields in HCTSIZ are
-+ simply set to 0 since no data transfer occurs in this case.
-+
-+ For a PING transfer in DMA mode, the HCTSIZ register is initialized with
-+ all the information required to perform the subsequent data transfer. In
-+ addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
-+ controller performs the entire PING protocol, then starts the data
-+ transfer.
-+ \param _core_if Pointer of core_if structure
-+ \param _ifxhc Information needed to initialize the host channel. The xfer_len
-+ value may be reduced to accommodate the max widths of the XferSize and
-+ PktCnt fields in the HCTSIZn register. The multi_count value may be changed
-+ to reflect the final xfer_len value.
-+ */
-+void ifxhcd_hc_start(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc)
-+{
-+ hctsiz_data_t hctsiz= { .d32=0 };
-+ hcchar_data_t hcchar;
-+ uint32_t max_hc_xfer_size = _core_if->params.max_transfer_size;
-+ uint16_t max_hc_pkt_count = _core_if->params.max_packet_count;
-+ ifxusb_hc_regs_t *hc_regs = _core_if->hc_regs[_ifxhc->hc_num];
-+ hfnum_data_t hfnum;
-+
-+ hctsiz.b.dopng = 0;
-+// if(_ifxhc->do_ping && !_ifxhc->is_in) hctsiz.b.dopng = 1;
-+
-+ _ifxhc->nak_countdown=_ifxhc->nak_countdown_r;
-+
-+ /* AVM/BC 20101111 Workaround: Always PING if HI-Speed Out and xfer_len > 0 */
-+ if(/*_ifxhc->do_ping &&*/
-+ (!_ifxhc->is_in) &&
-+ (_ifxhc->speed == IFXUSB_EP_SPEED_HIGH) &&
-+ ((_ifxhc->ep_type == IFXUSB_EP_TYPE_BULK) || ((_ifxhc->ep_type == IFXUSB_EP_TYPE_CTRL) && (_ifxhc->control_phase != IFXHCD_CONTROL_SETUP))) &&
-+ _ifxhc->xfer_len
-+ )
-+ hctsiz.b.dopng = 1;
-+
-+ _ifxhc->xfer_started = 1;
-+
-+ if(_ifxhc->epqh->pkt_count_limit > 0 && _ifxhc->epqh->pkt_count_limit < max_hc_pkt_count )
-+ {
-+ max_hc_pkt_count=_ifxhc->epqh->pkt_count_limit;
-+ if(max_hc_pkt_count * _ifxhc->mps < max_hc_xfer_size)
-+ max_hc_xfer_size = max_hc_pkt_count * _ifxhc->mps;
-+ }
-+ if (_ifxhc->split > 0)
-+ {
-+ {
-+ gint_data_t gintsts = {.d32 = 0};
-+ gintsts.b.sofintr = 1;
-+ ifxusb_mreg(&_core_if->core_global_regs->gintmsk,0, gintsts.d32);
-+ }
-+
-+ _ifxhc->start_pkt_count = 1;
-+ if(!_ifxhc->is_in && _ifxhc->split>1) // OUT CSPLIT
-+ _ifxhc->xfer_len = 0;
-+ if (_ifxhc->xfer_len > _ifxhc->mps)
-+ _ifxhc->xfer_len = _ifxhc->mps;
-+ if (_ifxhc->xfer_len > 188)
-+ _ifxhc->xfer_len = 188;
-+ }
-+ else if(_ifxhc->is_in)
-+ {
-+ _ifxhc->short_rw = 0;
-+ if (_ifxhc->xfer_len > 0)
-+ {
-+ if (_ifxhc->xfer_len > max_hc_xfer_size)
-+ _ifxhc->xfer_len = max_hc_xfer_size - _ifxhc->mps + 1;
-+ _ifxhc->start_pkt_count = (_ifxhc->xfer_len + _ifxhc->mps - 1) / _ifxhc->mps;
-+ if (_ifxhc->start_pkt_count > max_hc_pkt_count)
-+ _ifxhc->start_pkt_count = max_hc_pkt_count;
-+ }
-+ else /* Need 1 packet for transfer length of 0. */
-+ _ifxhc->start_pkt_count = 1;
-+ _ifxhc->xfer_len = _ifxhc->start_pkt_count * _ifxhc->mps;
-+ }
-+ else //non-split out
-+ {
-+ if (_ifxhc->xfer_len == 0)
-+ {
-+ /*== AVM/BC WK 20110421 ZERO PACKET Workaround: Is not an error ==*/
-+ //if(_ifxhc->short_rw==0)
-+ // printk(KERN_INFO "%s() line %d: ZLP write without short_rw set!\n",__func__,__LINE__);
-+ _ifxhc->start_pkt_count = 1;
-+ }
-+ else
-+ {
-+ if (_ifxhc->xfer_len > max_hc_xfer_size)
-+ {
-+ _ifxhc->start_pkt_count = (max_hc_xfer_size / _ifxhc->mps);
-+ _ifxhc->xfer_len = _ifxhc->start_pkt_count * _ifxhc->mps;
-+ }
-+ else
-+ {
-+ _ifxhc->start_pkt_count = (_ifxhc->xfer_len+_ifxhc->mps-1) / _ifxhc->mps;
-+// if(_ifxhc->start_pkt_count * _ifxhc->mps == _ifxhc->xfer_len )
-+// _ifxhc->start_pkt_count += _ifxhc->short_rw;
-+ /*== AVM/BC WK 20110421 ZERO PACKET Workaround / check if short_rw is needed ==*/
-+ if(_ifxhc->start_pkt_count * _ifxhc->mps != _ifxhc->xfer_len )
-+ _ifxhc->short_rw = 0;
-+ }
-+ }
-+ }
-+
-+ #ifdef __EN_ISOC__
-+ if (_ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC)
-+ {
-+ /* Set up the initial PID for the transfer. */
-+ #if 1
-+ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
-+ #else
-+ if (_ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
-+ {
-+ if (_ifxhc->is_in)
-+ {
-+ if (_ifxhc->multi_count == 1)
-+ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
-+ else if (_ifxhc->multi_count == 2)
-+ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
-+ else
-+ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA2;
-+ }
-+ else
-+ {
-+ if (_ifxhc->multi_count == 1)
-+ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
-+ else
-+ _ifxhc->data_pid_start = IFXUSB_HC_PID_MDATA;
-+ }
-+ }
-+ else
-+ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
-+ #endif
-+ }
-+ #endif
-+
-+ hctsiz.b.xfersize = _ifxhc->xfer_len;
-+ hctsiz.b.pktcnt = _ifxhc->start_pkt_count;
-+ hctsiz.b.pid = _ifxhc->data_pid_start;
-+
-+ ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32);
-+
-+
-+ IFX_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, _ifxhc->hc_num);
-+ IFX_DEBUGPL(DBG_HCDV, " Xfer Size: %d\n", hctsiz.b.xfersize);
-+ IFX_DEBUGPL(DBG_HCDV, " Num Pkts: %d\n" , hctsiz.b.pktcnt);
-+ IFX_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid);
-+ IFX_DEBUGPL(DBG_HCDV, " DMA: 0x%08x\n", (uint32_t)(CPHYSADDR( ((uint32_t)(_ifxhc->xfer_buff))+ _ifxhc->xfer_count )));
-+ ifxusb_wreg(&hc_regs->hcdma, (uint32_t)(CPHYSADDR( ((uint32_t)(_ifxhc->xfer_buff))+ _ifxhc->xfer_count )));
-+
-+ /* Start the split */
-+ if (_ifxhc->split>0)
-+ {
-+ hcsplt_data_t hcsplt;
-+ hcsplt.d32 = ifxusb_rreg (&hc_regs->hcsplt);
-+ hcsplt.b.spltena = 1;
-+ if (_ifxhc->split>1)
-+ hcsplt.b.compsplt = 1;
-+ else
-+ hcsplt.b.compsplt = 0;
-+
-+ #ifdef __EN_ISOC__
-+ if (_ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC)
-+ hcsplt.b.xactpos = _ifxhc->isoc_xact_pos;
-+ else
-+ #endif
-+ hcsplt.b.xactpos = IFXUSB_HCSPLIT_XACTPOS_ALL;// if not ISO
-+ ifxusb_wreg(&hc_regs->hcsplt, hcsplt.d32);
-+ IFX_DEBUGPL(DBG_HCDV, " SPLIT: XACT_POS:0x%08x\n", hcsplt.d32);
-+ }
-+
-+ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-+// hcchar.b.multicnt = _ifxhc->multi_count;
-+ hcchar.b.multicnt = 1;
-+
-+ #ifdef __DEBUG__
-+ _ifxhc->start_hcchar_val = hcchar.d32;
-+ if (hcchar.b.chdis)
-+ IFX_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
-+ __func__, _ifxhc->hc_num, hcchar.d32);
-+ #endif
-+
-+ /* Set host channel enable after all other setup is complete. */
-+ hcchar.b.chen = 1;
-+ hcchar.b.chdis = 0;
-+ hcchar.b.epdir = _ifxhc->is_in;
-+ _ifxhc->hcchar=hcchar.d32;
-+
-+ IFX_DEBUGPL(DBG_HCDV, " HCCHART: 0x%08x\n", _ifxhc->hcchar);
-+
-+ /* == 20110901 AVM/WK Fix: Clear IRQ flags in any case ==*/
-+ {
-+ hcint_data_t hcint= { .d32=0 };
-+ hcint.d32 =0xFFFFFFFF;
-+ ifxusb_wreg(&hc_regs->hcint, hcint.d32);
-+ }
-+
-+ if(_ifxhc->wait_for_sof==0)
-+ {
-+ hcint_data_t hcint;
-+
-+ hcint.d32=ifxusb_rreg(&hc_regs->hcintmsk);
-+
-+ hcint.b.nak =0;
-+ hcint.b.ack =0;
-+ /* == 20110901 AVM/WK Fix: We don't need NOT YET IRQ ==*/
-+ hcint.b.nyet=0;
-+ if(_ifxhc->nak_countdown_r)
-+ hcint.b.nak =1;
-+ ifxusb_wreg(&hc_regs->hcintmsk, hcint.d32);
-+
-+ /* AVM WK / BC 20100827
-+ * MOVED. Oddframe updated inmediatly before write HCChar Register.
-+ */
-+ if (_ifxhc->ep_type == IFXUSB_EP_TYPE_INTR || _ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC)
-+ {
-+ hfnum.d32 = ifxusb_rreg(&_core_if->host_global_regs->hfnum);
-+ /* 1 if _next_ frame is odd, 0 if it's even */
-+ hcchar.b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
-+ _ifxhc->hcchar=hcchar.d32;
-+ }
-+
-+ ifxusb_wreg(&hc_regs->hcchar, _ifxhc->hcchar);
-+#ifdef __USE_TIMER_4_SOF__
-+ } else {
-+ //activate SOF IRQ
-+ gint_data_t gintsts = {.d32 = 0};
-+ gintsts.b.sofintr = 1;
-+ ifxusb_mreg(&_core_if->core_global_regs->gintmsk,0, gintsts.d32);
-+#endif
-+ }
-+
-+ #ifdef __HC_XFER_TIMEOUT__
-+ /* Start a timer for this transfer. */
-+ init_timer(&_ifxhc->hc_xfer_timer);
-+ _ifxhc->hc_xfer_timer.function = hc_xfer_timeout;
-+ _ifxhc->hc_xfer_timer.core_if = _core_if;
-+ _ifxhc->hc_xfer_timer.hc = _ifxhc;
-+ _ifxhc->hc_xfer_timer.data = (unsigned long)(&_ifxhc->hc_xfer_info);
-+ _ifxhc->hc_xfer_timer.expires = jiffies + (HZ*10);
-+ add_timer(&_ifxhc->hc_xfer_timer);
-+ #endif
-+}
-+
-+/*!
-+ \brief Attempts to halt a host channel. This function should only be called
-+ to abort a transfer in DMA mode. Under normal circumstances in DMA mode, the
-+ controller halts the channel when the transfer is complete or a condition
-+ occurs that requires application intervention.
-+
-+ In DMA mode, always sets the Channel Enable and Channel Disable bits of the
-+ HCCHARn register. The controller ensures there is space in the request
-+ queue before submitting the halt request.
-+
-+ Some time may elapse before the core flushes any posted requests for this
-+ host channel and halts. The Channel Halted interrupt handler completes the
-+ deactivation of the host channel.
-+ */
-+void ifxhcd_hc_halt(ifxusb_core_if_t *_core_if,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxhcd_halt_status_e _halt_status)
-+{
-+ hcchar_data_t hcchar;
-+ ifxusb_hc_regs_t *hc_regs;
-+
-+ hc_regs = _core_if->hc_regs[_ifxhc->hc_num];
-+
-+ WARN_ON(_halt_status == HC_XFER_NO_HALT_STATUS);
-+
-+ if (_halt_status == HC_XFER_URB_DEQUEUE ||
-+ _halt_status == HC_XFER_AHB_ERR)
-+ {
-+ /*
-+ * Disable all channel interrupts except Ch Halted. The URBD
-+ * and EPQH state associated with this transfer has been cleared
-+ * (in the case of URB_DEQUEUE), so the channel needs to be
-+ * shut down carefully to prevent crashes.
-+ */
-+ hcint_data_t hcintmsk;
-+ hcintmsk.d32 = 0;
-+ hcintmsk.b.chhltd = 1;
-+ ifxusb_wreg(&hc_regs->hcintmsk, hcintmsk.d32);
-+
-+ /*
-+ * Make sure no other interrupts besides halt are currently
-+ * pending. Handling another interrupt could cause a crash due
-+ * to the URBD and EPQH state.
-+ */
-+ ifxusb_wreg(&hc_regs->hcint, ~hcintmsk.d32);
-+
-+ /*
-+ * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
-+ * even if the channel was already halted for some other
-+ * reason.
-+ */
-+ _ifxhc->halt_status = _halt_status;
-+
-+ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-+ if (hcchar.b.chen == 0)
-+ {
-+ /*
-+ * The channel is either already halted or it hasn't
-+ * started yet. In DMA mode, the transfer may halt if
-+ * it finishes normally or a condition occurs that
-+ * requires driver intervention. Don't want to halt
-+ * the channel again. In either Slave or DMA mode,
-+ * it's possible that the transfer has been assigned
-+ * to a channel, but not started yet when an URB is
-+ * dequeued. Don't want to halt a channel that hasn't
-+ * started yet.
-+ */
-+ return;
-+ }
-+ }
-+
-+ if (_ifxhc->halting)
-+ {
-+ /*
-+ * A halt has already been issued for this channel. This might
-+ * happen when a transfer is aborted by a higher level in
-+ * the stack.
-+ */
-+ #ifdef __DEBUG__
-+ IFX_PRINT("*** %s: Channel %d, _hc->halting already set ***\n",
-+ __func__, _ifxhc->hc_num);
-+ #endif
-+ //ifxusb_dump_global_registers(_core_if); */
-+ //ifxusb_dump_host_registers(_core_if); */
-+ return;
-+ }
-+ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-+ /* == AVM/WK 20100709 halt channel only if enabled ==*/
-+ if (hcchar.b.chen) {
-+ _ifxhc->halting = 1;
-+ hcchar.b.chdis = 1;
-+
-+ ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
-+ _ifxhc->halt_status = _halt_status;
-+ }
-+
-+ IFX_DEBUGPL(DBG_HCDV, "%s: Channel %d\n" , __func__, _ifxhc->hc_num);
-+ IFX_DEBUGPL(DBG_HCDV, " hcchar: 0x%08x\n" , hcchar.d32);
-+ IFX_DEBUGPL(DBG_HCDV, " halting: %d\n" , _ifxhc->halting);
-+ IFX_DEBUGPL(DBG_HCDV, " halt_status: %d\n" , _ifxhc->halt_status);
-+
-+ return;
-+}
-+
-+/*!
-+ \brief Clears a host channel.
-+ */
-+void ifxhcd_hc_cleanup(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc)
-+{
-+ ifxusb_hc_regs_t *hc_regs;
-+
-+ _ifxhc->xfer_started = 0;
-+ /*
-+ * Clear channel interrupt enables and any unhandled channel interrupt
-+ * conditions.
-+ */
-+ hc_regs = _core_if->hc_regs[_ifxhc->hc_num];
-+ ifxusb_wreg(&hc_regs->hcintmsk, 0);
-+ ifxusb_wreg(&hc_regs->hcint, 0xFFFFFFFF);
-+
-+ #ifdef __HC_XFER_TIMEOUT__
-+ del_timer(&_ifxhc->hc_xfer_timer);
-+ #endif
-+ #ifdef __DEBUG__
-+ {
-+ hcchar_data_t hcchar;
-+ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-+ if (hcchar.b.chdis)
-+ IFX_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", __func__, _ifxhc->hc_num, hcchar.d32);
-+ }
-+ #endif
-+}
-+
-+
-+
-+
-+
-+
-+
-+
-+#ifdef __DEBUG__
-+ static void dump_urb_info(struct urb *_urb, char* _fn_name)
-+ {
-+ IFX_PRINT("%s, urb %p\n" , _fn_name, _urb);
-+ IFX_PRINT(" Device address: %d\n", usb_pipedevice(_urb->pipe));
-+ IFX_PRINT(" Endpoint: %d, %s\n" , usb_pipeendpoint(_urb->pipe),
-+ (usb_pipein(_urb->pipe) ? "IN" : "OUT"));
-+ IFX_PRINT(" Endpoint type: %s\n",
-+ ({ char *pipetype;
-+ switch (usb_pipetype(_urb->pipe)) {
-+ case PIPE_CONTROL: pipetype = "CONTROL"; break;
-+ case PIPE_BULK: pipetype = "BULK"; break;
-+ case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break;
-+ case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break;
-+ default: pipetype = "UNKNOWN"; break;
-+ };
-+ pipetype;
-+ }));
-+ IFX_PRINT(" Speed: %s\n",
-+ ({ char *speed;
-+ switch (_urb->dev->speed) {
-+ case USB_SPEED_HIGH: speed = "HIGH"; break;
-+ case USB_SPEED_FULL: speed = "FULL"; break;
-+ case USB_SPEED_LOW: speed = "LOW"; break;
-+ default: speed = "UNKNOWN"; break;
-+ };
-+ speed;
-+ }));
-+ IFX_PRINT(" Max packet size: %d\n",
-+ usb_maxpacket(_urb->dev, _urb->pipe, usb_pipeout(_urb->pipe)));
-+ IFX_PRINT(" Data buffer length: %d\n", _urb->transfer_buffer_length);
-+ IFX_PRINT(" Transfer buffer: %p, Transfer DMA: %p\n",
-+ _urb->transfer_buffer, (void *)_urb->transfer_dma);
-+ IFX_PRINT(" Setup buffer: %p, Setup DMA: %p\n",
-+ _urb->setup_packet, (void *)_urb->setup_dma);
-+ IFX_PRINT(" Interval: %d\n", _urb->interval);
-+ if (usb_pipetype(_urb->pipe) == PIPE_ISOCHRONOUS)
-+ {
-+ int i;
-+ for (i = 0; i < _urb->number_of_packets; i++)
-+ {
-+ IFX_PRINT(" ISO Desc %d:\n", i);
-+ IFX_PRINT(" offset: %d, length %d\n",
-+ _urb->iso_frame_desc[i].offset,
-+ _urb->iso_frame_desc[i].length);
-+ }
-+ }
-+ }
-+
-+ static void dump_channel_info(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh)
-+ {
-+ if (_epqh->hc != NULL)
-+ {
-+ ifxhcd_hc_t *hc = _epqh->hc;
-+ struct list_head *item;
-+ ifxhcd_epqh_t *epqh_item;
-+
-+ ifxusb_hc_regs_t *hc_regs;
-+
-+ hcchar_data_t hcchar;
-+ hcsplt_data_t hcsplt;
-+ hctsiz_data_t hctsiz;
-+ uint32_t hcdma;
-+
-+ hc_regs = _ifxhcd->core_if.hc_regs[hc->hc_num];
-+ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-+ hcsplt.d32 = ifxusb_rreg(&hc_regs->hcsplt);
-+ hctsiz.d32 = ifxusb_rreg(&hc_regs->hctsiz);
-+ hcdma = ifxusb_rreg(&hc_regs->hcdma);
-+
-+ IFX_PRINT(" Assigned to channel %d:\n" , hc->hc_num);
-+ IFX_PRINT(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
-+ IFX_PRINT(" hctsiz 0x%08x, hcdma 0x%08x\n" , hctsiz.d32, hcdma);
-+ IFX_PRINT(" dev_addr: %d, ep_num: %d, is_in: %d\n",
-+ hc->dev_addr, hc->ep_num, hc->is_in);
-+ IFX_PRINT(" ep_type: %d\n" , hc->ep_type);
-+ IFX_PRINT(" max_packet_size: %d\n", hc->mps);
-+ IFX_PRINT(" data_pid_start: %d\n" , hc->data_pid_start);
-+ IFX_PRINT(" xfer_started: %d\n" , hc->xfer_started);
-+ IFX_PRINT(" halt_status: %d\n" , hc->halt_status);
-+ IFX_PRINT(" xfer_buff: %p\n" , hc->xfer_buff);
-+ IFX_PRINT(" xfer_len: %d\n" , hc->xfer_len);
-+ IFX_PRINT(" epqh: %p\n" , hc->epqh);
-+ IFX_PRINT(" NP Active:\n");
-+ list_for_each(item, &_ifxhcd->epqh_np_active)
-+ {
-+ epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
-+ IFX_PRINT(" %p\n", epqh_item);
-+ }
-+ IFX_PRINT(" NP Ready:\n");
-+ list_for_each(item, &_ifxhcd->epqh_np_ready)
-+ {
-+ epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
-+ IFX_PRINT(" %p\n", epqh_item);
-+ }
-+ IFX_PRINT(" INTR Active:\n");
-+ list_for_each(item, &_ifxhcd->epqh_intr_active)
-+ {
-+ epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
-+ IFX_PRINT(" %p\n", epqh_item);
-+ }
-+ IFX_PRINT(" INTR Ready:\n");
-+ list_for_each(item, &_ifxhcd->epqh_intr_ready)
-+ {
-+ epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
-+ IFX_PRINT(" %p\n", epqh_item);
-+ }
-+ #ifdef __EN_ISOC__
-+ IFX_PRINT(" ISOC Active:\n");
-+ list_for_each(item, &_ifxhcd->epqh_isoc_active)
-+ {
-+ epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
-+ IFX_PRINT(" %p\n", epqh_item);
-+ }
-+ IFX_PRINT(" ISOC Ready:\n");
-+ list_for_each(item, &_ifxhcd->epqh_isoc_ready)
-+ {
-+ epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
-+ IFX_PRINT(" %p\n", epqh_item);
-+ }
-+ #endif
-+ IFX_PRINT(" Standby:\n");
-+ list_for_each(item, &_ifxhcd->epqh_stdby)
-+ {
-+ epqh_item = list_entry(item, ifxhcd_epqh_t, epqh_list_entry);
-+ IFX_PRINT(" %p\n", epqh_item);
-+ }
-+ }
-+ }
-+#endif //__DEBUG__
-+
-+
-+/*!
-+ \brief This function writes a packet into the Tx FIFO associated with the Host
-+ Channel. For a channel associated with a non-periodic EP, the non-periodic
-+ Tx FIFO is written. For a channel associated with a periodic EP, the
-+ periodic Tx FIFO is written. This function should only be called in Slave
-+ mode.
-+
-+ Upon return the xfer_buff and xfer_count fields in _hc are incremented by
-+ then number of bytes written to the Tx FIFO.
-+ */
-+
-+#ifdef __ENABLE_DUMP__
-+ void ifxhcd_dump_state(ifxhcd_hcd_t *_ifxhcd)
-+ {
-+ int num_channels;
-+ int i;
-+ num_channels = _ifxhcd->core_if.params.host_channels;
-+ IFX_PRINT("\n");
-+ IFX_PRINT("************************************************************\n");
-+ IFX_PRINT("HCD State:\n");
-+ IFX_PRINT(" Num channels: %d\n", num_channels);
-+ for (i = 0; i < num_channels; i++) {
-+ ifxhcd_hc_t *hc = &_ifxhcd->ifxhc[i];
-+ IFX_PRINT(" Channel %d:\n", hc->hc_num);
-+ IFX_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
-+ hc->dev_addr, hc->ep_num, hc->is_in);
-+ IFX_PRINT(" speed: %d\n" , hc->speed);
-+ IFX_PRINT(" ep_type: %d\n" , hc->ep_type);
-+ IFX_PRINT(" mps: %d\n", hc->mps);
-+ IFX_PRINT(" data_pid_start: %d\n" , hc->data_pid_start);
-+ IFX_PRINT(" xfer_started: %d\n" , hc->xfer_started);
-+ IFX_PRINT(" xfer_buff: %p\n" , hc->xfer_buff);
-+ IFX_PRINT(" xfer_len: %d\n" , hc->xfer_len);
-+ IFX_PRINT(" xfer_count: %d\n" , hc->xfer_count);
-+ IFX_PRINT(" halting: %d\n" , hc->halting);
-+ IFX_PRINT(" halt_status: %d\n" , hc->halt_status);
-+ IFX_PRINT(" split: %d\n" , hc->split);
-+ IFX_PRINT(" hub_addr: %d\n" , hc->hub_addr);
-+ IFX_PRINT(" port_addr: %d\n" , hc->port_addr);
-+ #ifdef __EN_ISOC__
-+ IFX_PRINT(" isoc_xact_pos: %d\n" , hc->isoc_xact_pos);
-+ #endif
-+ IFX_PRINT(" epqh: %p\n" , hc->epqh);
-+ IFX_PRINT(" short_rw: %d\n" , hc->short_rw);
-+ IFX_PRINT(" do_ping: %d\n" , hc->do_ping);
-+ IFX_PRINT(" control_phase: %d\n" , hc->control_phase);
-+ IFX_PRINT(" pkt_count_limit: %d\n", hc->epqh->pkt_count_limit);
-+ IFX_PRINT(" start_pkt_count: %d\n" , hc->start_pkt_count);
-+ }
-+ IFX_PRINT("************************************************************\n");
-+ IFX_PRINT("\n");
-+ }
-+#endif //__ENABLE_DUMP__
-+
---- /dev/null
-+++ b/drivers/usb/ifxhcd/ifxhcd.h
-@@ -0,0 +1,628 @@
-+/*****************************************************************************
-+ ** FILE NAME : ifxhcd.h
-+ ** PROJECT : IFX USB sub-system V3
-+ ** MODULES : IFX USB sub-system Host and Device driver
-+ ** SRC VERSION : 1.0
-+ ** DATE : 1/Jan/2009
-+ ** AUTHOR : Chen, Howard
-+ ** DESCRIPTION : This file contains the structures, constants, and interfaces for
-+ ** the Host Contoller Driver (HCD).
-+ **
-+ ** The Host Controller Driver (HCD) is responsible for translating requests
-+ ** from the USB Driver into the appropriate actions on the IFXUSB controller.
-+ ** It isolates the USBD from the specifics of the controller by providing an
-+ ** API to the USBD.
-+ ** FUNCTIONS :
-+ ** COMPILER : gcc
-+ ** REFERENCE : Synopsys DWC-OTG Driver 2.7
-+ ** COPYRIGHT :
-+ ** Version Control Section **
-+ ** $Author$
-+ ** $Date$
-+ ** $Revisions$
-+ ** $Log$ Revision history
-+*****************************************************************************/
-+
-+/*!
-+ \defgroup IFXUSB_HCD HCD Interface
-+ \ingroup IFXUSB_DRIVER_V3
-+ \brief The Host Controller Driver (HCD) is responsible for translating requests
-+ from the USB Driver into the appropriate actions on the IFXUSB controller.
-+ It isolates the USBD from the specifics of the controller by providing an
-+ API to the USBD.
-+ */
-+
-+
-+/*!
-+ \file ifxhcd.h
-+ \ingroup IFXUSB_DRIVER_V3
-+ \brief This file contains the structures, constants, and interfaces for
-+ the Host Contoller Driver (HCD).
-+ */
-+
-+#if !defined(__IFXHCD_H__)
-+#define __IFXHCD_H__
-+
-+#include <linux/list.h>
-+#include <linux/usb.h>
-+
-+#ifdef __USE_TIMER_4_SOF__
-+#include <linux/hrtimer.h>
-+#endif
-+#include <linux/usb/hcd.h>
-+
-+#include "ifxusb_cif.h"
-+#include "ifxusb_plat.h"
-+
-+
-+
-+/*!
-+ \addtogroup IFXUSB_HCD
-+ */
-+/*@{*/
-+
-+/* Phases for control transfers.*/
-+typedef enum ifxhcd_control_phase {
-+ IFXHCD_CONTROL_SETUP,
-+ IFXHCD_CONTROL_DATA,
-+ IFXHCD_CONTROL_STATUS
-+} ifxhcd_control_phase_e;
-+
-+/* Reasons for halting a host channel. */
-+typedef enum ifxhcd_halt_status
-+{
-+ HC_XFER_NO_HALT_STATUS, // Initial
-+ HC_XFER_COMPLETE, // Xact complete without error, upward
-+ HC_XFER_URB_COMPLETE, // Xfer complete without error, short upward
-+ HC_XFER_STALL, // HC stopped abnormally, upward/downward
-+ HC_XFER_XACT_ERR, // HC stopped abnormally, upward
-+ HC_XFER_FRAME_OVERRUN, // HC stopped abnormally, upward
-+ HC_XFER_BABBLE_ERR, // HC stopped abnormally, upward
-+ HC_XFER_AHB_ERR, // HC stopped abnormally, upward
-+ HC_XFER_DATA_TOGGLE_ERR,
-+ HC_XFER_URB_DEQUEUE, // HC stopper manually, downward
-+ HC_XFER_NAK // HC stopped by nak monitor, downward
-+} ifxhcd_halt_status_e;
-+
-+struct ifxhcd_urbd;
-+struct ifxhcd_hc ;
-+struct ifxhcd_epqh ;
-+struct ifxhcd_hcd;
-+
-+/*!
-+ \brief A URB Descriptor (URBD) holds the state of a bulk, control,
-+ interrupt, or isochronous transfer. A single URBD is created for each URB
-+ (of one of these types) submitted to the HCD. The transfer associated with
-+ a URBD may require one or multiple transactions.
-+
-+ A URBD is linked to a EP Queue Head, which is entered in either the
-+ isoc, intr or non-periodic schedule for execution. When a URBD is chosen for
-+ execution, some or all of its transactions may be executed. After
-+ execution, the state of the URBD is updated. The URBD may be retired if all
-+ its transactions are complete or if an error occurred. Otherwise, it
-+ remains in the schedule so more transactions can be executed later.
-+ */
-+typedef struct ifxhcd_urbd {
-+ struct list_head urbd_list_entry; // Hook for EPQH->urbd_list and ifxhcd->urbd_complete_list
-+ struct urb *urb; /*!< URB for this transfer */
-+ //struct urb {
-+ // struct list_head urb_list;
-+ // struct list_head anchor_list;
-+ // struct usb_anchor * anchor;
-+ // struct usb_device * dev;
-+ // struct usb_host_endpoint * ep;
-+ // unsigned int pipe;
-+ // int status;
-+ // unsigned int transfer_flags;
-+ // void * transfer_buffer;
-+ // dma_addr_t transfer_dma;
-+ // u32 transfer_buffer_length;
-+ // u32 actual_length;
-+ // unsigned char * setup_packet;
-+ // dma_addr_t setup_dma;
-+ // int start_frame;
-+ // int number_of_packets;
-+ // int interval;
-+ // int error_count;
-+ // void * context;
-+ // usb_complete_t complete;
-+ // struct usb_iso_packet_descriptor iso_frame_desc[0];
-+ //};
-+ //urb_list For use by current owner of the URB.
-+ //anchor_list membership in the list of an anchor
-+ //anchor to anchor URBs to a common mooring
-+ //dev Identifies the USB device to perform the request.
-+ //ep Points to the endpoint's data structure. Will
-+ // eventually replace pipe.
-+ //pipe Holds endpoint number, direction, type, and more.
-+ // Create these values with the eight macros available; u
-+ // sb_{snd,rcv}TYPEpipe(dev,endpoint), where the TYPE is
-+ // "ctrl", "bulk", "int" or "iso". For example
-+ // usb_sndbulkpipe or usb_rcvintpipe. Endpoint numbers
-+ // range from zero to fifteen. Note that "in" endpoint two
-+ // is a different endpoint (and pipe) from "out" endpoint
-+ // two. The current configuration controls the existence,
-+ // type, and maximum packet size of any given endpoint.
-+ //status This is read in non-iso completion functions to get
-+ // the status of the particular request. ISO requests
-+ // only use it to tell whether the URB was unlinked;
-+ // detailed status for each frame is in the fields of
-+ // the iso_frame-desc.
-+ //transfer_flags A variety of flags may be used to affect how URB
-+ // submission, unlinking, or operation are handled.
-+ // Different kinds of URB can use different flags.
-+ // URB_SHORT_NOT_OK
-+ // URB_ISO_ASAP
-+ // URB_NO_TRANSFER_DMA_MAP
-+ // URB_NO_SETUP_DMA_MAP
-+ // URB_NO_FSBR
-+ // URB_ZERO_PACKET
-+ // URB_NO_INTERRUPT
-+ //transfer_buffer This identifies the buffer to (or from) which the I/O
-+ // request will be performed (unless URB_NO_TRANSFER_DMA_MAP
-+ // is set). This buffer must be suitable for DMA; allocate it
-+ // with kmalloc or equivalent. For transfers to "in"
-+ // endpoints, contents of this buffer will be modified. This
-+ // buffer is used for the data stage of control transfers.
-+ //transfer_dma When transfer_flags includes URB_NO_TRANSFER_DMA_MAP, the
-+ // device driver is saying that it provided this DMA address,
-+ // which the host controller driver should use in preference
-+ // to the transfer_buffer.
-+ //transfer_buffer_length How big is transfer_buffer. The transfer may be broken
-+ // up into chunks according to the current maximum packet size
-+ // for the endpoint, which is a function of the configuration
-+ // and is encoded in the pipe. When the length is zero, neither
-+ // transfer_buffer nor transfer_dma is used.
-+ //actual_length This is read in non-iso completion functions, and it tells
-+ // how many bytes (out of transfer_buffer_length) were transferred.
-+ // It will normally be the same as requested, unless either an error
-+ // was reported or a short read was performed. The URB_SHORT_NOT_OK
-+ // transfer flag may be used to make such short reads be reported
-+ // as errors.
-+ //setup_packet Only used for control transfers, this points to eight bytes of
-+ // setup data. Control transfers always start by sending this data
-+ // to the device. Then transfer_buffer is read or written, if needed.
-+ //setup_dma For control transfers with URB_NO_SETUP_DMA_MAP set, the device
-+ // driver has provided this DMA address for the setup packet. The
-+ // host controller driver should use this in preference to setup_packet.
-+ //start_frame Returns the initial frame for isochronous transfers.
-+ //number_of_packets Lists the number of ISO transfer buffers.
-+ //interval Specifies the polling interval for interrupt or isochronous transfers.
-+ // The units are frames (milliseconds) for for full and low speed devices,
-+ // and microframes (1/8 millisecond) for highspeed ones.
-+ //error_count Returns the number of ISO transfers that reported errors.
-+ //context For use in completion functions. This normally points to request-specific
-+ // driver context.
-+ //complete Completion handler. This URB is passed as the parameter to the completion
-+ // function. The completion function may then do what it likes with the URB,
-+ // including resubmitting or freeing it.
-+ //iso_frame_desc[0] Used to provide arrays of ISO transfer buffers and to collect the transfer
-+ // status for each buffer.
-+
-+ struct ifxhcd_epqh *epqh;
-+ // Actual data portion, not SETUP or STATUS in case of CTRL XFER
-+ // DMA adjusted
-+ uint8_t *setup_buff; /*!< Pointer to the entire transfer buffer. (CPU accessable)*/
-+ uint8_t *xfer_buff; /*!< Pointer to the entire transfer buffer. (CPU accessable)*/
-+ uint32_t xfer_len; /*!< Total number of bytes to transfer in this xfer. */
-+ unsigned is_in :1;
-+ unsigned is_active:1;
-+
-+ // For ALL XFER
-+ uint8_t error_count; /*!< Holds the number of bus errors that have occurred for a transaction
-+ within this transfer.
-+ */
-+ /*== AVM/BC 20101111 Needed for URB Complete List ==*/
-+ int status;
-+ // For ISOC XFER only
-+ #ifdef __EN_ISOC__
-+ int isoc_frame_index; /*!< Index of the next frame descriptor for an isochronous transfer. A
-+ frame descriptor describes the buffer position and length of the
-+ data to be transferred in the next scheduled (micro)frame of an
-+ isochronous transfer. It also holds status for that transaction.
-+ The frame index starts at 0.
-+ */
-+ // For SPLITed ISOC XFER only
-+ uint8_t isoc_split_pos; /*!< Position of the ISOC split on full/low speed */
-+ uint16_t isoc_split_offset;/*!< Position of the ISOC split in the buffer for the current frame */
-+ #endif
-+} ifxhcd_urbd_t;
-+
-+/*!
-+ \brief A EP Queue Head (EPQH) holds the static characteristics of an endpoint and
-+ maintains a list of transfers (URBDs) for that endpoint. A EPQH structure may
-+ be entered in either the isoc, intr or non-periodic schedule.
-+ */
-+
-+typedef struct ifxhcd_epqh {
-+ struct list_head epqh_list_entry; // Hook for EP Queues
-+ struct list_head urbd_list; /*!< List of URBDs for this EPQH. */
-+ struct ifxhcd_hc *hc; /*!< Host channel currently processing transfers for this EPQH. */
-+ struct ifxhcd_urbd *urbd; /*!< URBD currently assigned to a host channel for this EPQH. */
-+ struct usb_host_endpoint *sysep;
-+ uint8_t ep_type; /*!< Endpoint type. One of the following values:
-+ - IFXUSB_EP_TYPE_CTRL
-+ - IFXUSB_EP_TYPE_ISOC
-+ - IFXUSB_EP_TYPE_BULK
-+ - IFXUSB_EP_TYPE_INTR
-+ */
-+ uint16_t mps; /*!< wMaxPacketSize Field of Endpoint Descriptor. */
-+
-+ /* == AVM/WK 20100710 Fix - Use toggle of usbcore ==*/
-+ /*uint8_t data_toggle;*/ /*!< Determines the PID of the next data packet
-+ One of the following values:
-+ - IFXHCD_HC_PID_DATA0
-+ - IFXHCD_HC_PID_DATA1
-+ */
-+ uint8_t is_active;
-+
-+ uint8_t pkt_count_limit;
-+ #ifdef __EPQD_DESTROY_TIMEOUT__
-+ struct timer_list destroy_timer;
-+ #endif
-+
-+ uint16_t wait_for_sof;
-+ uint8_t need_split; /*!< Full/low speed endpoint on high-speed hub requires split. */
-+ uint16_t interval; /*!< Interval between transfers in (micro)frames. (for INTR)*/
-+
-+ uint16_t period_counter; /*!< Interval between transfers in (micro)frames. */
-+ uint8_t period_do;
-+
-+ uint8_t aligned_checked;
-+
-+ #if defined(__UNALIGNED_BUFFER_ADJ__)
-+ uint8_t using_aligned_setup;
-+ uint8_t *aligned_setup;
-+ uint8_t using_aligned_buf;
-+ uint8_t *aligned_buf;
-+ unsigned aligned_buf_len : 19;
-+ #endif
-+
-+ uint8_t *dump_buf;
-+} ifxhcd_epqh_t;
-+
-+
-+#if defined(__HC_XFER_TIMEOUT__)
-+ struct ifxusb_core_if;
-+ struct ifxhcd_hc;
-+ typedef struct hc_xfer_info
-+ {
-+ struct ifxusb_core_if *core_if;
-+ struct ifxhcd_hc *hc;
-+ } hc_xfer_info_t;
-+#endif //defined(__HC_XFER_TIMEOUT__)
-+
-+
-+/*!
-+ \brief Host channel descriptor. This structure represents the state of a single
-+ host channel when acting in host mode. It contains the data items needed to
-+ transfer packets to an endpoint via a host channel.
-+ */
-+typedef struct ifxhcd_hc
-+{
-+ struct list_head hc_list_entry ; // Hook to free hc
-+ struct ifxhcd_epqh *epqh ; /*!< EP Queue Head for the transfer being processed by this channel. */
-+
-+ uint8_t hc_num ; /*!< Host channel number used for register address lookup */
-+ uint8_t *xfer_buff ; /*!< Pointer to the entire transfer buffer. */
-+ uint32_t xfer_count ; /*!< Number of bytes transferred so far. The offset of the begin of the buf */
-+ uint32_t xfer_len ; /*!< Total number of bytes to transfer in this xfer. */
-+ uint16_t start_pkt_count ; /*!< Packet count at start of transfer. Used to calculate the actual xfer size*/
-+ ifxhcd_halt_status_e halt_status; /*!< Reason for halting the host channel. */
-+
-+ unsigned dev_addr : 7; /*!< Device to access */
-+ unsigned ep_num : 4; /*!< EP to access */
-+ unsigned is_in : 1; /*!< EP direction. 0: OUT, 1: IN */
-+ unsigned speed : 2; /*!< EP speed. */
-+ unsigned ep_type : 2; /*!< Endpoint type. */
-+ unsigned mps :11; /*!< Max packet size in bytes */
-+ unsigned data_pid_start : 2; /*!< PID for initial transaction. */
-+ unsigned do_ping : 1; /*!< Set to 1 to indicate that a PING request should be issued on this
-+ channel. If 0, process normally.
-+ */
-+
-+ unsigned xfer_started : 1; /*!< Flag to indicate whether the transfer has been started. Set to 1 if
-+ it has been started, 0 otherwise.
-+ */
-+ unsigned halting : 1; /*!< Set to 1 if the host channel has been halted, but the core is not
-+ finished flushing queued requests. Otherwise 0.
-+ */
-+ unsigned short_rw : 1; /*!< When Tx, means termination needed.
-+ When Rx, indicate Short Read */
-+ /* Split settings for the host channel */
-+ unsigned split : 2; /*!< Split: 0-Non Split, 1-SSPLIT, 2&3 CSPLIT */
-+
-+ /*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/
-+ unsigned nyet_count;
-+
-+ /* nak monitor */
-+ unsigned nak_retry_r : 16;
-+ unsigned nak_retry : 16;
-+ #define nak_retry_max 40000
-+ unsigned nak_countdown : 8;
-+ unsigned nak_countdown_r: 8;
-+ #define nak_countdown_max 1
-+
-+ uint16_t wait_for_sof;
-+ ifxhcd_control_phase_e control_phase; /*!< Current phase for control transfers (Setup, Data, or Status). */
-+ uint32_t ssplit_out_xfer_count; /*!< How many bytes transferred during SSPLIT OUT */
-+ #ifdef __DEBUG__
-+ uint32_t start_hcchar_val;
-+ #endif
-+ #ifdef __HC_XFER_TIMEOUT__
-+ hc_xfer_info_t hc_xfer_info;
-+ struct timer_list hc_xfer_timer;
-+ #endif
-+ uint32_t hcchar;
-+
-+ /* Split settings for the host channel */
-+ uint8_t hub_addr; /*!< Address of high speed hub */
-+ uint8_t port_addr; /*!< Port of the low/full speed device */
-+ #ifdef __EN_ISOC__
-+ uint8_t isoc_xact_pos; /*!< Split transaction position */
-+ #endif
-+} ifxhcd_hc_t;
-+
-+
-+/*!
-+ \brief This structure holds the state of the HCD, including the non-periodic and
-+ periodic schedules.
-+ */
-+typedef struct ifxhcd_hcd
-+{
-+ struct device *dev;
-+ struct hc_driver hc_driver;
-+ ifxusb_core_if_t core_if; /*!< Pointer to the core interface structure. */
-+ struct usb_hcd *syshcd;
-+
-+ volatile union ifxhcd_internal_flags
-+ {
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned port_connect_status_change : 1;
-+ unsigned port_connect_status : 1;
-+ unsigned port_reset_change : 1;
-+ unsigned port_enable_change : 1;
-+ unsigned port_suspend_change : 1;
-+ unsigned port_over_current_change : 1;
-+ unsigned reserved : 27;
-+ } b;
-+ } flags; /*!< Internal HCD Flags */
-+
-+ struct ifxhcd_hc ifxhc[MAX_EPS_CHANNELS]; /*!< Array of pointers to the host channel descriptors. Allows accessing
-+ a host channel descriptor given the host channel number. This is
-+ useful in interrupt handlers.
-+ */
-+ struct list_head free_hc_list; /*!< Free host channels in the controller. This is a list of ifxhcd_hc_t items. */
-+ uint8_t *status_buf; /*!< Buffer to use for any data received during the status phase of a
-+ control transfer. Normally no data is transferred during the status
-+ phase. This buffer is used as a bit bucket.
-+ */
-+ #define IFXHCD_STATUS_BUF_SIZE 64
-+
-+ struct list_head epqh_np_active; // with URBD, with HC
-+ struct list_head epqh_np_ready; // with URBD, No HC
-+
-+ struct list_head epqh_intr_active; // with URBD, with HC
-+ struct list_head epqh_intr_ready; // with URBD, no pass, No HC
-+
-+ #ifdef __EN_ISOC__
-+ struct list_head epqh_isoc_active; // with URBD, with HC
-+ struct list_head epqh_isoc_ready; // with URBD, no pass, No HC
-+ #endif
-+
-+ /*== AVM/BC 20101111 URB Complete List ==*/
-+ struct list_head urbd_complete_list;
-+
-+ struct list_head epqh_stdby;
-+
-+ /* AVM/BC 20101111 flags removed */
-+ //unsigned process_channels_in_use : 1;
-+ //unsigned select_eps_in_use : 1;
-+
-+ struct tasklet_struct select_eps; /*!< Tasket to do a reset */
-+ uint32_t lastframe;
-+ spinlock_t lock;
-+#ifdef __USE_TIMER_4_SOF__
-+ struct hrtimer hr_timer;
-+#endif
-+} ifxhcd_hcd_t;
-+
-+/* Gets the ifxhcd_hcd from a struct usb_hcd */
-+static inline ifxhcd_hcd_t *syshcd_to_ifxhcd(struct usb_hcd *syshcd)
-+{
-+ return (ifxhcd_hcd_t *)(syshcd->hcd_priv[0]);
-+}
-+
-+/* Gets the struct usb_hcd that contains a ifxhcd_hcd_t. */
-+static inline struct usb_hcd *ifxhcd_to_syshcd(ifxhcd_hcd_t *ifxhcd)
-+{
-+ return (struct usb_hcd *)(ifxhcd->syshcd);
-+}
-+
-+/*! \brief HCD Create/Destroy Functions */
-+/*@{*/
-+ extern int ifxhcd_init (ifxhcd_hcd_t *_ifxhcd);
-+ extern void ifxhcd_remove(ifxhcd_hcd_t *_ifxhcd);
-+/*@}*/
-+
-+/*! \brief Linux HC Driver API Functions */
-+/*@{*/
-+extern int ifxhcd_start(struct usb_hcd *hcd);
-+extern void ifxhcd_stop (struct usb_hcd *hcd);
-+extern int ifxhcd_get_frame_number(struct usb_hcd *hcd);
-+
-+
-+/*!
-+ \brief This function does the setup for a data transfer for a host channel and
-+ starts the transfer. May be called in either Slave mode or DMA mode. In
-+ Slave mode, the caller must ensure that there is sufficient space in the
-+ request queue and Tx Data FIFO.
-+
-+ For an OUT transfer in Slave mode, it loads a data packet into the
-+ appropriate FIFO. If necessary, additional data packets will be loaded in
-+ the Host ISR.
-+
-+ For an IN transfer in Slave mode, a data packet is requested. The data
-+ packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
-+ additional data packets are requested in the Host ISR.
-+
-+ For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
-+ register along with a packet count of 1 and the channel is enabled. This
-+ causes a single PING transaction to occur. Other fields in HCTSIZ are
-+ simply set to 0 since no data transfer occurs in this case.
-+
-+ For a PING transfer in DMA mode, the HCTSIZ register is initialized with
-+ all the information required to perform the subsequent data transfer. In
-+ addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
-+ controller performs the entire PING protocol, then starts the data
-+ transfer.
-+
-+ @param _ifxhc Information needed to initialize the host channel. The xfer_len
-+ value may be reduced to accommodate the max widths of the XferSize and
-+ PktCnt fields in the HCTSIZn register. The multi_count value may be changed
-+ to reflect the final xfer_len value.
-+ */
-+extern void ifxhcd_hc_start(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc);
-+
-+//extern int ifxhcd_urb_enqueue(struct usb_hcd *_syshcd, struct usb_host_endpoint *_sysep, struct urb *_urb, gfp_t mem_flags);
-+//extern int ifxhcd_urb_dequeue(struct usb_hcd *_syshcd, struct urb *_urb);
-+extern irqreturn_t ifxhcd_irq(struct usb_hcd *_syshcd);
-+int ifxhcd_urb_enqueue( struct usb_hcd *_syshcd,
-+ /*--- struct usb_host_endpoint *_sysep, Parameter im 2.6.28 entfallen ---*/
-+ struct urb *_urb,
-+ gfp_t _mem_flags);
-+int ifxhcd_urb_dequeue( struct usb_hcd *_syshcd,
-+ struct urb *_urb, int status /* Parameter neu in 2.6.28 */);
-+
-+extern void ifxhcd_endpoint_disable(struct usb_hcd *_syshcd, struct usb_host_endpoint *_sysep);
-+
-+extern int ifxhcd_hub_status_data(struct usb_hcd *_syshcd, char *_buf);
-+extern int ifxhcd_hub_control( struct usb_hcd *_syshcd,
-+ u16 _typeReq,
-+ u16 _wValue,
-+ u16 _wIndex,
-+ char *_buf,
-+ u16 _wLength);
-+
-+/*@}*/
-+
-+/*! \brief Transaction Execution Functions */
-+/*@{*/
-+extern void ifxhcd_complete_urb (ifxhcd_hcd_t *_ifxhcd, ifxhcd_urbd_t *_urbd, int _status);
-+
-+/*@}*/
-+
-+/*! \brief Deferred Transaction Execution Functions */
-+/*@{*/
-+
-+/*== AVM/BC 20101111 URB Complete List ==*/
-+extern void defer_ifxhcd_complete_urb (ifxhcd_hcd_t *_ifxhcd, ifxhcd_urbd_t *_urbd, int _status);
-+
-+/*!
-+ \brief Clears the transfer state for a host channel. This function is normally
-+ called after a transfer is done and the host channel is being released.
-+ */
-+extern void ifxhcd_hc_cleanup(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc);
-+
-+/*!
-+ \brief Attempts to halt a host channel. This function should only be called in
-+ Slave mode or to abort a transfer in either Slave mode or DMA mode. Under
-+ normal circumstances in DMA mode, the controller halts the channel when the
-+ transfer is complete or a condition occurs that requires application
-+ intervention.
-+
-+ In slave mode, checks for a free request queue entry, then sets the Channel
-+ Enable and Channel Disable bits of the Host Channel Characteristics
-+ register of the specified channel to intiate the halt. If there is no free
-+ request queue entry, sets only the Channel Disable bit of the HCCHARn
-+ register to flush requests for this channel. In the latter case, sets a
-+ flag to indicate that the host channel needs to be halted when a request
-+ queue slot is open.
-+
-+ In DMA mode, always sets the Channel Enable and Channel Disable bits of the
-+ HCCHARn register. The controller ensures there is space in the request
-+ queue before submitting the halt request.
-+
-+ Some time may elapse before the core flushes any posted requests for this
-+ host channel and halts. The Channel Halted interrupt handler completes the
-+ deactivation of the host channel.
-+ */
-+extern void ifxhcd_hc_halt(ifxusb_core_if_t *_core_if,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxhcd_halt_status_e _halt_status);
-+
-+/*!
-+ \brief Prepares a host channel for transferring packets to/from a specific
-+ endpoint. The HCCHARn register is set up with the characteristics specified
-+ in _ifxhc. Host channel interrupts that may need to be serviced while this
-+ transfer is in progress are enabled.
-+ */
-+extern void ifxhcd_hc_init(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc);
-+
-+/*!
-+ \brief This function is called to handle the disconnection of host port.
-+ */
-+int32_t ifxhcd_disconnect(ifxhcd_hcd_t *_ifxhcd);
-+/*@}*/
-+
-+/*! \brief Interrupt Handler Functions */
-+/*@{*/
-+extern irqreturn_t ifxhcd_oc_irq(int _irq, void *_dev);
-+
-+extern int32_t ifxhcd_handle_oc_intr(ifxhcd_hcd_t *_ifxhcd);
-+extern int32_t ifxhcd_handle_intr (ifxhcd_hcd_t *_ifxhcd);
-+/*@}*/
-+
-+
-+/*! \brief Schedule Queue Functions */
-+/*@{*/
-+extern ifxhcd_epqh_t *ifxhcd_epqh_create (ifxhcd_hcd_t *_ifxhcd, struct urb *_urb);
-+extern void ifxhcd_epqh_free ( ifxhcd_epqh_t *_epqh);
-+extern void select_eps (ifxhcd_hcd_t *_ifxhcd);
-+extern void process_channels(ifxhcd_hcd_t *_ifxhcd);
-+extern void process_channels_sub(ifxhcd_hcd_t *_ifxhcd);
-+extern void complete_channel(ifxhcd_hcd_t *_ifxhcd, ifxhcd_hc_t *_ifxhc, ifxhcd_urbd_t *_urbd);
-+extern void ifxhcd_epqh_ready(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh);
-+extern void ifxhcd_epqh_active(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh);
-+extern void ifxhcd_epqh_idle(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh);
-+extern void ifxhcd_epqh_idle_periodic(ifxhcd_epqh_t *_epqh);
-+extern int ifxhcd_urbd_create (ifxhcd_hcd_t *_ifxhcd,struct urb *_urb);
-+/*@}*/
-+
-+/*! \brief Gets the usb_host_endpoint associated with an URB. */
-+static inline struct usb_host_endpoint *ifxhcd_urb_to_endpoint(struct urb *_urb)
-+{
-+ struct usb_device *dev = _urb->dev;
-+ int ep_num = usb_pipeendpoint(_urb->pipe);
-+
-+ return (usb_pipein(_urb->pipe))?(dev->ep_in[ep_num]):(dev->ep_out[ep_num]);
-+}
-+
-+/*!
-+ * \brief Gets the endpoint number from a _bEndpointAddress argument. The endpoint is
-+ * qualified with its direction (possible 32 endpoints per device).
-+ */
-+#define ifxhcd_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \
-+ ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4)
-+
-+
-+/* AVM/WK: not needed?
-+
-+extern struct usb_device *usb_alloc_dev (struct usb_device *parent, struct usb_bus *, unsigned port);
-+extern int usb_add_hcd (struct usb_hcd *syshcd, unsigned int irqnum, unsigned long irqflags);
-+extern void usb_remove_hcd (struct usb_hcd *syshcd);
-+extern struct usb_hcd *usb_create_hcd (const struct hc_driver *driver, struct device *dev, char *bus_name);
-+extern void usb_hcd_giveback_urb (struct usb_hcd *syshcd, struct urb *urb);
-+extern void usb_put_hcd (struct usb_hcd *syshcd);
-+extern long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount);
-+
-+*/
-+/** Internal Functions */
-+void ifxhcd_dump_state(ifxhcd_hcd_t *_ifxhcd);
-+extern char *syserr(int errno);
-+
-+/*@}*//*IFXUSB_HCD*/
-+
-+#endif // __IFXHCD_H__
---- /dev/null
-+++ b/drivers/usb/ifxhcd/ifxhcd_es.c
-@@ -0,0 +1,549 @@
-+/*****************************************************************************
-+ ** FILE NAME : ifxhcd_es.c
-+ ** PROJECT : IFX USB sub-system V3
-+ ** MODULES : IFX USB sub-system Host and Device driver
-+ ** SRC VERSION : 1.0
-+ ** DATE : 1/Jan/2009
-+ ** AUTHOR : Chen, Howard
-+ ** DESCRIPTION : The file contain function to enable host mode USB-IF Electrical Test function.
-+ *****************************************************************************/
-+
-+/*!
-+ \file ifxhcd_es.c
-+ \ingroup IFXUSB_DRIVER_V3
-+ \brief The file contain function to enable host mode USB-IF Electrical Test function.
-+*/
-+
-+#include <linux/version.h>
-+#include "ifxusb_version.h"
-+
-+#include <linux/kernel.h>
-+
-+#include <linux/errno.h>
-+
-+#include <linux/dma-mapping.h>
-+
-+#include "ifxusb_plat.h"
-+#include "ifxusb_regs.h"
-+#include "ifxusb_cif.h"
-+#include "ifxhcd.h"
-+
-+
-+#ifdef __WITH_HS_ELECT_TST__
-+ /*
-+ * Quick and dirty hack to implement the HS Electrical Test
-+ * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature.
-+ *
-+ * This code was copied from our userspace app "hset". It sends a
-+ * Get Device Descriptor control sequence in two parts, first the
-+ * Setup packet by itself, followed some time later by the In and
-+ * Ack packets. Rather than trying to figure out how to add this
-+ * functionality to the normal driver code, we just hijack the
-+ * hardware, using these two function to drive the hardware
-+ * directly.
-+ */
-+
-+
-+ void do_setup(ifxusb_core_if_t *_core_if)
-+ {
-+
-+ ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
-+ ifxusb_host_global_regs_t *hc_global_regs = _core_if->host_global_regs;
-+ ifxusb_hc_regs_t *hc_regs = _core_if->hc_regs[0];
-+ uint32_t *data_fifo = _core_if->data_fifo[0];
-+
-+ gint_data_t gintsts;
-+ hctsiz_data_t hctsiz;
-+ hcchar_data_t hcchar;
-+ haint_data_t haint;
-+ hcint_data_t hcint;
-+
-+
-+ /* Enable HAINTs */
-+ ifxusb_wreg(&hc_global_regs->haintmsk, 0x0001);
-+
-+ /* Enable HCINTs */
-+ ifxusb_wreg(&hc_regs->hcintmsk, 0x04a3);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /* Read HAINT */
-+ haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ ifxusb_wreg(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ ifxusb_wreg(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /*
-+ * Send Setup packet (Get Device Descriptor)
-+ */
-+
-+ /* Make sure channel is disabled */
-+ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-+ if (hcchar.b.chen) {
-+ //fprintf(stderr, "Channel already enabled 1, HCCHAR = %08x\n", hcchar.d32);
-+ hcchar.b.chdis = 1;
-+ // hcchar.b.chen = 1;
-+ ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
-+ //sleep(1);
-+ mdelay(1000);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /* Read HAINT */
-+ haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ ifxusb_wreg(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ ifxusb_wreg(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
-+
-+ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-+ //if (hcchar.b.chen) {
-+ // fprintf(stderr, "** Channel _still_ enabled 1, HCCHAR = %08x **\n", hcchar.d32);
-+ //}
-+ }
-+
-+ /* Set HCTSIZ */
-+ hctsiz.d32 = 0;
-+ hctsiz.b.xfersize = 8;
-+ hctsiz.b.pktcnt = 1;
-+ hctsiz.b.pid = IFXUSB_HC_PID_SETUP;
-+ ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ /* Set HCCHAR */
-+ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-+ hcchar.b.eptype = IFXUSB_EP_TYPE_CTRL;
-+ hcchar.b.epdir = 0;
-+ hcchar.b.epnum = 0;
-+ hcchar.b.mps = 8;
-+ hcchar.b.chen = 1;
-+ ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
-+
-+ /* Fill FIFO with Setup data for Get Device Descriptor */
-+ ifxusb_wreg(data_fifo++, 0x01000680);
-+ ifxusb_wreg(data_fifo++, 0x00080000);
-+
-+ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
-+ //fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Wait for host channel interrupt */
-+ do {
-+ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
-+ } while (gintsts.b.hcintr == 0);
-+
-+ //fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Disable HCINTs */
-+ ifxusb_wreg(&hc_regs->hcintmsk, 0x0000);
-+
-+ /* Disable HAINTs */
-+ ifxusb_wreg(&hc_global_regs->haintmsk, 0x0000);
-+
-+ /* Read HAINT */
-+ haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ ifxusb_wreg(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ ifxusb_wreg(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+ }
-+
-+ void do_in_ack(ifxusb_core_if_t *_core_if)
-+ {
-+
-+ ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
-+ ifxusb_host_global_regs_t *hc_global_regs = _core_if->host_global_regs;
-+ ifxusb_hc_regs_t *hc_regs = _core_if->hc_regs[0];
-+ uint32_t *data_fifo = _core_if->data_fifo[0];
-+
-+ gint_data_t gintsts;
-+ hctsiz_data_t hctsiz;
-+ hcchar_data_t hcchar;
-+ haint_data_t haint;
-+ hcint_data_t hcint;
-+ grxsts_data_t grxsts;
-+
-+ /* Enable HAINTs */
-+ ifxusb_wreg(&hc_global_regs->haintmsk, 0x0001);
-+
-+ /* Enable HCINTs */
-+ ifxusb_wreg(&hc_regs->hcintmsk, 0x04a3);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /* Read HAINT */
-+ haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ ifxusb_wreg(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ ifxusb_wreg(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /*
-+ * Receive Control In packet
-+ */
-+
-+ /* Make sure channel is disabled */
-+ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-+ if (hcchar.b.chen) {
-+ //fprintf(stderr, "Channel already enabled 2, HCCHAR = %08x\n", hcchar.d32);
-+ hcchar.b.chdis = 1;
-+ hcchar.b.chen = 1;
-+ ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
-+ //sleep(1);
-+ mdelay(1000);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /* Read HAINT */
-+ haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ ifxusb_wreg(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ ifxusb_wreg(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
-+
-+ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-+ //if (hcchar.b.chen) {
-+ // fprintf(stderr, "** Channel _still_ enabled 2, HCCHAR = %08x **\n", hcchar.d32);
-+ //}
-+ }
-+
-+ /* Set HCTSIZ */
-+ hctsiz.d32 = 0;
-+ hctsiz.b.xfersize = 8;
-+ hctsiz.b.pktcnt = 1;
-+ hctsiz.b.pid = IFXUSB_HC_PID_DATA1;
-+ ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ /* Set HCCHAR */
-+ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-+ hcchar.b.eptype = IFXUSB_EP_TYPE_CTRL;
-+ hcchar.b.epdir = 1;
-+ hcchar.b.epnum = 0;
-+ hcchar.b.mps = 8;
-+ hcchar.b.chen = 1;
-+ ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
-+
-+ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
-+ //fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Wait for receive status queue interrupt */
-+ do {
-+ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
-+ } while (gintsts.b.rxstsqlvl == 0);
-+
-+ //fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Read RXSTS */
-+ grxsts.d32 = ifxusb_rreg(&global_regs->grxstsp);
-+ //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
-+
-+ /* Clear RXSTSQLVL in GINTSTS */
-+ gintsts.d32 = 0;
-+ gintsts.b.rxstsqlvl = 1;
-+ ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
-+
-+ switch (grxsts.hb.pktsts) {
-+ case IFXUSB_HSTS_DATA_UPDT:
-+ /* Read the data into the host buffer */
-+ if (grxsts.hb.bcnt > 0) {
-+ int i;
-+ int word_count = (grxsts.hb.bcnt + 3) / 4;
-+
-+ for (i = 0; i < word_count; i++) {
-+ (void)ifxusb_rreg(data_fifo++);
-+ }
-+ }
-+
-+ //fprintf(stderr, "Received %u bytes\n", (unsigned)grxsts.hb.bcnt);
-+ break;
-+
-+ default:
-+ //fprintf(stderr, "** Unexpected GRXSTS packet status 1 **\n");
-+ break;
-+ }
-+
-+ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
-+ //fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Wait for receive status queue interrupt */
-+ do {
-+ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
-+ } while (gintsts.b.rxstsqlvl == 0);
-+
-+ //fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Read RXSTS */
-+ grxsts.d32 = ifxusb_rreg(&global_regs->grxstsp);
-+ //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32);
-+
-+ /* Clear RXSTSQLVL in GINTSTS */
-+ gintsts.d32 = 0;
-+ gintsts.b.rxstsqlvl = 1;
-+ ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
-+
-+ switch (grxsts.hb.pktsts) {
-+ case IFXUSB_HSTS_XFER_COMP:
-+ break;
-+
-+ default:
-+ //fprintf(stderr, "** Unexpected GRXSTS packet status 2 **\n");
-+ break;
-+ }
-+
-+ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
-+ //fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Wait for host channel interrupt */
-+ do {
-+ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
-+ } while (gintsts.b.hcintr == 0);
-+
-+ //fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Read HAINT */
-+ haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ ifxusb_wreg(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ ifxusb_wreg(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ // usleep(100000);
-+ // mdelay(100);
-+ mdelay(1);
-+
-+ /*
-+ * Send handshake packet
-+ */
-+
-+ /* Read HAINT */
-+ haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ ifxusb_wreg(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ ifxusb_wreg(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /* Make sure channel is disabled */
-+ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-+ if (hcchar.b.chen) {
-+ //fprintf(stderr, "Channel already enabled 3, HCCHAR = %08x\n", hcchar.d32);
-+ hcchar.b.chdis = 1;
-+ hcchar.b.chen = 1;
-+ ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
-+ //sleep(1);
-+ mdelay(1000);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+
-+ /* Read HAINT */
-+ haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ ifxusb_wreg(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ ifxusb_wreg(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
-+
-+ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-+ //if (hcchar.b.chen) {
-+ // fprintf(stderr, "** Channel _still_ enabled 3, HCCHAR = %08x **\n", hcchar.d32);
-+ //}
-+ }
-+
-+ /* Set HCTSIZ */
-+ hctsiz.d32 = 0;
-+ hctsiz.b.xfersize = 0;
-+ hctsiz.b.pktcnt = 1;
-+ hctsiz.b.pid = IFXUSB_HC_PID_DATA1;
-+ ifxusb_wreg(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ /* Set HCCHAR */
-+ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-+ hcchar.b.eptype = IFXUSB_EP_TYPE_CTRL;
-+ hcchar.b.epdir = 0;
-+ hcchar.b.epnum = 0;
-+ hcchar.b.mps = 8;
-+ hcchar.b.chen = 1;
-+ ifxusb_wreg(&hc_regs->hcchar, hcchar.d32);
-+
-+ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
-+ //fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Wait for host channel interrupt */
-+ do {
-+ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
-+ } while (gintsts.b.hcintr == 0);
-+
-+ //fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32);
-+
-+ /* Disable HCINTs */
-+ ifxusb_wreg(&hc_regs->hcintmsk, 0x0000);
-+
-+ /* Disable HAINTs */
-+ ifxusb_wreg(&hc_global_regs->haintmsk, 0x0000);
-+
-+ /* Read HAINT */
-+ haint.d32 = ifxusb_rreg(&hc_global_regs->haint);
-+ //fprintf(stderr, "HAINT: %08x\n", haint.d32);
-+
-+ /* Read HCINT */
-+ hcint.d32 = ifxusb_rreg(&hc_regs->hcint);
-+ //fprintf(stderr, "HCINT: %08x\n", hcint.d32);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = ifxusb_rreg(&hc_regs->hcchar);
-+ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32);
-+
-+ /* Clear HCINT */
-+ ifxusb_wreg(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ ifxusb_wreg(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ ifxusb_wreg(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = ifxusb_rreg(&global_regs->gintsts);
-+ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32);
-+ }
-+#endif //__WITH_HS_ELECT_TST__
-+
---- /dev/null
-+++ b/drivers/usb/ifxhcd/ifxhcd_intr.c
-@@ -0,0 +1,3742 @@
-+/*****************************************************************************
-+ ** FILE NAME : ifxhcd_intr.c
-+ ** PROJECT : IFX USB sub-system V3
-+ ** MODULES : IFX USB sub-system Host and Device driver
-+ ** SRC VERSION : 1.0
-+ ** DATE : 1/Jan/2009
-+ ** AUTHOR : Chen, Howard
-+ ** DESCRIPTION : This file contains the implementation of the HCD Interrupt handlers.
-+ *****************************************************************************/
-+
-+/*!
-+ \file ifxhcd_intr.c
-+ \ingroup IFXUSB_DRIVER_V3
-+ \brief This file contains the implementation of the HCD Interrupt handlers.
-+*/
-+
-+
-+#include <linux/version.h>
-+#include "ifxusb_version.h"
-+
-+#include "ifxusb_plat.h"
-+#include "ifxusb_regs.h"
-+#include "ifxusb_cif.h"
-+
-+#include "ifxhcd.h"
-+
-+/* AVM/WK 20100520*/
-+#ifdef __EN_ISOC__
-+#error AVM/WK: CONFIG_USB_HOST_IFX_WITH_ISO currently not supported!
-+#endif
-+
-+/* Macro used to clear one channel interrupt */
-+#define clear_hc_int(_hc_regs_,_intr_) \
-+ do { \
-+ hcint_data_t hcint_clear = {.d32 = 0}; \
-+ hcint_clear.b._intr_ = 1; \
-+ ifxusb_wreg(&((_hc_regs_)->hcint), hcint_clear.d32); \
-+ } while (0)
-+
-+/*
-+ * Macro used to disable one channel interrupt. Channel interrupts are
-+ * disabled when the channel is halted or released by the interrupt handler.
-+ * There is no need to handle further interrupts of that type until the
-+ * channel is re-assigned. In fact, subsequent handling may cause crashes
-+ * because the channel structures are cleaned up when the channel is released.
-+ */
-+#define disable_hc_int(_hc_regs_,_intr_) \
-+ do { \
-+ hcint_data_t hcintmsk = {.d32 = 0}; \
-+ hcintmsk.b._intr_ = 1; \
-+ ifxusb_mreg(&((_hc_regs_)->hcintmsk), hcintmsk.d32, 0); \
-+ } while (0)
-+
-+#define enable_hc_int(_hc_regs_,_intr_) \
-+ do { \
-+ hcint_data_t hcintmsk = {.d32 = 0}; \
-+ hcintmsk.b._intr_ = 1; \
-+ ifxusb_mreg(&((_hc_regs_)->hcintmsk),0, hcintmsk.d32); \
-+ } while (0)
-+
-+/*
-+ * Save the starting data toggle for the next transfer. The data toggle is
-+ * saved in the QH for non-control transfers and it's saved in the QTD for
-+ * control transfers.
-+ */
-+uint8_t read_data_toggle(ifxusb_hc_regs_t *_hc_regs)
-+{
-+ hctsiz_data_t hctsiz;
-+ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-+ return(hctsiz.b.pid);
-+}
-+
-+
-+static void release_channel_dump(ifxhcd_hc_t *ifxhc,
-+ struct urb *urb,
-+ ifxhcd_epqh_t *epqh,
-+ ifxhcd_urbd_t *urbd,
-+ ifxhcd_halt_status_e halt_status)
-+{
-+ #ifdef __DEBUG__
-+ printk(KERN_INFO);
-+ switch (halt_status)
-+ {
-+ case HC_XFER_NO_HALT_STATUS:
-+ printk("HC_XFER_NO_HALT_STATUS");break;
-+ case HC_XFER_URB_COMPLETE:
-+ printk("HC_XFER_URB_COMPLETE");break;
-+ case HC_XFER_AHB_ERR:
-+ printk("HC_XFER_AHB_ERR");break;
-+ case HC_XFER_STALL:
-+ printk("HC_XFER_STALL");break;
-+ case HC_XFER_BABBLE_ERR:
-+ printk("HC_XFER_BABBLE_ERR");break;
-+ case HC_XFER_XACT_ERR:
-+ printk("HC_XFER_XACT_ERR");break;
-+ case HC_XFER_URB_DEQUEUE:
-+ printk("HC_XFER_URB_DEQUEUE");break;
-+ case HC_XFER_FRAME_OVERRUN:
-+ printk("HC_XFER_FRAME_OVERRUN");break;
-+ case HC_XFER_DATA_TOGGLE_ERR:
-+ printk("HC_XFER_DATA_TOGGLE_ERR");break;
-+ case HC_XFER_NAK:
-+ printk("HC_XFER_NAK");break;
-+ case HC_XFER_COMPLETE:
-+ printk("HC_XFER_COMPLETE");break;
-+ default:
-+ printk("KNOWN");break;
-+ }
-+ if(ifxhc)
-+ printk("Ch %d %s%s S%d " , ifxhc->hc_num
-+ ,(ifxhc->ep_type == IFXUSB_EP_TYPE_CTRL)?"CTRL-":
-+ ((ifxhc->ep_type == IFXUSB_EP_TYPE_BULK)?"BULK-":
-+ ((ifxhc->ep_type == IFXUSB_EP_TYPE_INTR)?"INTR-":
-+ ((ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC)?"ISOC-":"????"
-+ )
-+ )
-+ )
-+ ,(ifxhc->is_in)?"IN":"OUT"
-+ ,(ifxhc->split)
-+ );
-+ else
-+ printk(" [NULL HC] ");
-+ printk("urb=%p epqh=%p urbd=%p\n",urb,epqh,urbd);
-+
-+ if(urb)
-+ {
-+ printk(KERN_INFO " Device address: %d\n", usb_pipedevice(urb->pipe));
-+ printk(KERN_INFO " Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
-+ (usb_pipein(urb->pipe) ? "IN" : "OUT"));
-+ printk(KERN_INFO " Endpoint type: %s\n",
-+ ({char *pipetype;
-+ switch (usb_pipetype(urb->pipe)) {
-+ case PIPE_CONTROL: pipetype = "CTRL"; break;
-+ case PIPE_BULK: pipetype = "BULK"; break;
-+ case PIPE_INTERRUPT: pipetype = "INTR"; break;
-+ case PIPE_ISOCHRONOUS: pipetype = "ISOC"; break;
-+ default: pipetype = "????"; break;
-+ }; pipetype;}));
-+ printk(KERN_INFO " Speed: %s\n",
-+ ({char *speed;
-+ switch (urb->dev->speed) {
-+ case USB_SPEED_HIGH: speed = "HS"; break;
-+ case USB_SPEED_FULL: speed = "FS"; break;
-+ case USB_SPEED_LOW: speed = "LS"; break;
-+ default: speed = "????"; break;
-+ }; speed;}));
-+ printk(KERN_INFO " Max packet size: %d\n",
-+ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
-+ printk(KERN_INFO " Data buffer length: %d\n", urb->transfer_buffer_length);
-+ printk(KERN_INFO " Transfer buffer: %p, Transfer DMA: %p\n",
-+ urb->transfer_buffer, (void *)urb->transfer_dma);
-+ printk(KERN_INFO " Setup buffer: %p, Setup DMA: %p\n",
-+ urb->setup_packet, (void *)urb->setup_dma);
-+ printk(KERN_INFO " Interval: %d\n", urb->interval);
-+ switch (urb->status)
-+ {
-+ case HC_XFER_NO_HALT_STATUS:
-+ printk(KERN_INFO " STATUS:HC_XFER_NO_HALT_STATUS\n");break;
-+ case HC_XFER_URB_COMPLETE:
-+ printk(KERN_INFO " STATUS:HC_XFER_URB_COMPLETE\n");break;
-+ case HC_XFER_AHB_ERR:
-+ printk(KERN_INFO " STATUS:HC_XFER_AHB_ERR\n");break;
-+ case HC_XFER_STALL:
-+ printk(KERN_INFO " STATUS:HC_XFER_STALL\n");break;
-+ case HC_XFER_BABBLE_ERR:
-+ printk(KERN_INFO " STATUS:HC_XFER_BABBLE_ERR\n");break;
-+ case HC_XFER_XACT_ERR:
-+ printk(KERN_INFO " STATUS:HC_XFER_XACT_ERR\n");break;
-+ case HC_XFER_URB_DEQUEUE:
-+ printk(KERN_INFO " STATUS:HC_XFER_URB_DEQUEUE\n");break;
-+ case HC_XFER_FRAME_OVERRUN:
-+ printk(KERN_INFO " STATUS:HC_XFER_FRAME_OVERRUN\n");break;
-+ case HC_XFER_DATA_TOGGLE_ERR:
-+ printk(KERN_INFO " STATUS:HC_XFER_DATA_TOGGLE_ERR\n");break;
-+ case HC_XFER_COMPLETE:
-+ printk(KERN_INFO " STATUS:HC_XFER_COMPLETE\n");break;
-+ default:
-+ printk(KERN_INFO " STATUS:KNOWN\n");break;
-+ }
-+ }
-+ #endif
-+}
-+
-+
-+static void release_channel(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxhcd_halt_status_e _halt_status)
-+{
-+ ifxusb_hc_regs_t *hc_regs = _ifxhcd->core_if.hc_regs[_ifxhc->hc_num];
-+ struct urb *urb = NULL;
-+ ifxhcd_epqh_t *epqh = NULL;
-+ ifxhcd_urbd_t *urbd = NULL;
-+
-+ IFX_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status %d\n",
-+ __func__, _ifxhc->hc_num, _halt_status);
-+
-+ epqh=_ifxhc->epqh;
-+
-+ if(!epqh)
-+ IFX_ERROR("%s epqh=null\n",__func__);
-+ else
-+ {
-+ urbd=epqh->urbd;
-+ if(!urbd)
-+ IFX_ERROR("%s urbd=null\n",__func__);
-+ else
-+ {
-+ urb=urbd->urb;
-+ if(!urb)
-+ IFX_ERROR("%s urb =null\n",__func__);
-+ else {
-+ /* == AVM/WK 20100710 Fix - Use toggle of usbcore ==*/
-+ unsigned toggle = (read_data_toggle(hc_regs) == IFXUSB_HC_PID_DATA0)? 0: 1;
-+ usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), usb_pipeout(urb->pipe), toggle);
-+ }
-+ }
-+ //epqh->data_toggle = read_data_toggle(hc_regs);
-+
-+ }
-+
-+ switch (_halt_status)
-+ {
-+ case HC_XFER_NO_HALT_STATUS:
-+ IFX_ERROR("%s: No halt_status, channel %d\n", __func__, _ifxhc->hc_num);
-+ break;
-+ case HC_XFER_COMPLETE:
-+ IFX_ERROR("%s: Inavalid halt_status HC_XFER_COMPLETE, channel %d\n", __func__, _ifxhc->hc_num);
-+ break;
-+ case HC_XFER_URB_COMPLETE:
-+ case HC_XFER_URB_DEQUEUE:
-+ case HC_XFER_AHB_ERR:
-+ case HC_XFER_XACT_ERR:
-+ case HC_XFER_FRAME_OVERRUN:
-+ if(urbd && urb) {
-+ /* == 20110803 AVM/WK FIX set status, if still in progress == */
-+ if (urb->status == -EINPROGRESS) {
-+ switch (_halt_status) {
-+ case HC_XFER_URB_COMPLETE:
-+ urb->status = 0;
-+ break;
-+ case HC_XFER_URB_DEQUEUE:
-+ urb->status = -ECONNRESET;
-+ break;
-+ case HC_XFER_AHB_ERR:
-+ case HC_XFER_XACT_ERR:
-+ case HC_XFER_FRAME_OVERRUN:
-+ urb->status = -EPROTO;
-+ break;
-+ default:
-+ break;
-+ }
-+ }
-+ /*== AVM/BC 20101111 Deferred Complete ==*/
-+ defer_ifxhcd_complete_urb(_ifxhcd, urbd, urb->status);
-+ }
-+ else
-+ {
-+ IFX_WARN("WARNING %s():%d urbd=%p urb=%p\n",__func__,__LINE__,urbd,urb);
-+ release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status);
-+ }
-+ if(epqh)
-+ ifxhcd_epqh_idle(_ifxhcd, epqh);
-+ else
-+ {
-+ IFX_WARN("WARNING %s():%d epqh=%p\n",__func__,__LINE__,epqh);
-+ release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status);
-+ }
-+
-+ list_add_tail(&_ifxhc->hc_list_entry, &_ifxhcd->free_hc_list);
-+ ifxhcd_hc_cleanup(&_ifxhcd->core_if, _ifxhc);
-+ break;
-+ case HC_XFER_STALL:
-+ release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status);
-+ if(urbd)
-+ /*== AVM/BC 20101111 Deferred Complete ==*/
-+ defer_ifxhcd_complete_urb(_ifxhcd, urbd, -EPIPE);
-+ else
-+ IFX_WARN("WARNING %s():%d urbd=%p urb=%p\n",__func__,__LINE__,urbd,urb);
-+ if(epqh)
-+ {
-+// epqh->data_toggle = 0;
-+ ifxhcd_epqh_idle(_ifxhcd, epqh);
-+ }
-+ else
-+ IFX_WARN("WARNING %s():%d epqh=%p\n",__func__,__LINE__,epqh);
-+ list_add_tail(&_ifxhc->hc_list_entry, &_ifxhcd->free_hc_list);
-+ ifxhcd_hc_cleanup(&_ifxhcd->core_if, _ifxhc);
-+ break;
-+ case HC_XFER_NAK:
-+ release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status);
-+ if(urbd)
-+ {
-+ //ifxhcd_complete_urb(_ifxhcd, urbd, -ETIMEDOUT);
-+ urb->status = 0;
-+ /*== AVM/BC 20101111 Deferred Complete ==*/
-+ defer_ifxhcd_complete_urb(_ifxhcd, urbd, urb->status);
-+ }
-+ else
-+ IFX_WARN("WARNING %s():%d urbd=%p urb=%p\n",__func__,__LINE__,urbd,urb);
-+ if(epqh)
-+ ifxhcd_epqh_idle(_ifxhcd, epqh);
-+ else
-+ IFX_WARN("WARNING %s():%d epqh=%p\n",__func__,__LINE__,epqh);
-+ list_add_tail(&_ifxhc->hc_list_entry, &_ifxhcd->free_hc_list);
-+ ifxhcd_hc_cleanup(&_ifxhcd->core_if, _ifxhc);
-+ break;
-+ case HC_XFER_BABBLE_ERR:
-+ case HC_XFER_DATA_TOGGLE_ERR:
-+ release_channel_dump(_ifxhc,urb,epqh,urbd,_halt_status);
-+ if(urbd)
-+ /*== AVM/BC 20101111 Deferred Complete ==*/
-+ defer_ifxhcd_complete_urb(_ifxhcd, urbd, -EOVERFLOW);
-+ else
-+ IFX_WARN("WARNING %s():%d urbd=%p urb=%p\n",__func__,__LINE__,urbd,urb);
-+ if(epqh)
-+ ifxhcd_epqh_idle(_ifxhcd, epqh);
-+ else
-+ IFX_WARN("WARNING %s():%d epqh=%p\n",__func__,__LINE__,epqh);
-+ list_add_tail(&_ifxhc->hc_list_entry, &_ifxhcd->free_hc_list);
-+ ifxhcd_hc_cleanup(&_ifxhcd->core_if, _ifxhc);
-+ break;
-+ }
-+ select_eps(_ifxhcd);
-+}
-+
-+/*
-+ * Updates the state of the URB after a Transfer Complete interrupt on the
-+ * host channel. Updates the actual_length field of the URB based on the
-+ * number of bytes transferred via the host channel. Sets the URB status
-+ * if the data transfer is finished.
-+ *
-+ * @return 1 if the data transfer specified by the URB is completely finished,
-+ * 0 otherwise.
-+ */
-+static int update_urb_state_xfer_comp(ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ struct urb *_urb,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ int xfer_done = 0;
-+
-+ if (_ifxhc->is_in)
-+ {
-+ hctsiz_data_t hctsiz;
-+ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-+ _urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
-+ if ((hctsiz.b.xfersize != 0) || (_urb->actual_length >= _urb->transfer_buffer_length))
-+ {
-+ xfer_done = 1;
-+ _urb->status = 0;
-+ /* 20110805 AVM/WK Workaround: catch overflow error here, hardware does not */
-+ if (_urb->actual_length > _urb->transfer_buffer_length) {
-+ _urb->status = -EOVERFLOW;
-+ }
-+ #if 0
-+ if (_urb->actual_length < _urb->transfer_buffer_length && _urb->transfer_flags & URB_SHORT_NOT_OK)
-+ _urb->status = -EREMOTEIO;
-+ #endif
-+ }
-+
-+ }
-+ else
-+ {
-+ if (_ifxhc->split)
-+ _urb->actual_length += _ifxhc->ssplit_out_xfer_count;
-+ else
-+ _urb->actual_length += _ifxhc->xfer_len;
-+
-+ if (_urb->actual_length >= _urb->transfer_buffer_length)
-+ {
-+ /*== AVM/BC WK 20110421 ZERO PACKET Workaround ==*/
-+ if ((_ifxhc->short_rw == 1) && ( _ifxhc->xfer_len > 0) && ( _ifxhc->xfer_len % _ifxhc->mps == 0 ))
-+ {
-+ _ifxhc->short_rw = 0;
-+ //Transfer not finished. Another iteration for ZLP.
-+ }
-+ else
-+ {
-+ xfer_done = 1;
-+ }
-+ _urb->status = 0;
-+ }
-+ }
-+
-+ #ifdef __DEBUG__
-+ {
-+ hctsiz_data_t hctsiz;
-+ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-+ IFX_DEBUGPL(DBG_HCDV, "IFXUSB: %s: %s, channel %d\n",
-+ __func__, (_ifxhc->is_in ? "IN" : "OUT"), _ifxhc->hc_num);
-+ IFX_DEBUGPL(DBG_HCDV, " hc->xfer_len %d\n", _ifxhc->xfer_len);
-+ IFX_DEBUGPL(DBG_HCDV, " hctsiz.xfersize %d\n", hctsiz.b.xfersize);
-+ IFX_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n",
-+ _urb->transfer_buffer_length);
-+ IFX_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", _urb->actual_length);
-+ }
-+ #endif
-+ return xfer_done;
-+}
-+
-+/*== AVM/BC 20101111 Function called with Lock ==*/
-+
-+void complete_channel(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ ifxusb_hc_regs_t *hc_regs = _ifxhcd->core_if.hc_regs[_ifxhc->hc_num];
-+ struct urb *urb = NULL;
-+ ifxhcd_epqh_t *epqh = NULL;
-+ int urb_xfer_done;
-+
-+ IFX_DEBUGPL(DBG_HCD, "--Complete Channel %d : \n", _ifxhc->hc_num);
-+
-+ if(!_urbd)
-+ {
-+ IFX_ERROR("ERROR %s():%d urbd=%p\n",__func__,__LINE__,_urbd);
-+ return;
-+ }
-+
-+ urb = _urbd->urb;
-+ epqh = _urbd->epqh;
-+
-+ if(!urb || !epqh)
-+ {
-+ IFX_ERROR("ERROR %s():%d urb=%p epqh=%p\n",__func__,__LINE__,urb,epqh);
-+ return;
-+ }
-+
-+ _ifxhc->do_ping=0;
-+
-+ if (_ifxhc->split)
-+ _ifxhc->split = 1;
-+
-+ switch (epqh->ep_type)
-+ {
-+ case IFXUSB_EP_TYPE_CTRL:
-+ switch (_ifxhc->control_phase)
-+ {
-+ case IFXHCD_CONTROL_SETUP:
-+ IFX_DEBUGPL(DBG_HCDV, " Control setup transaction done\n");
-+ if (_urbd->xfer_len > 0)
-+ {
-+ _ifxhc->control_phase = IFXHCD_CONTROL_DATA;
-+ _ifxhc->is_in = _urbd->is_in;
-+ _ifxhc->xfer_len = _urbd->xfer_len;
-+ #if defined(__UNALIGNED_BUFFER_ADJ__)
-+ if(epqh->using_aligned_buf)
-+ _ifxhc->xfer_buff = epqh->aligned_buf;
-+ else
-+ #endif
-+ _ifxhc->xfer_buff = _urbd->xfer_buff;
-+ }
-+ else
-+ {
-+ _ifxhc->control_phase = IFXHCD_CONTROL_STATUS;
-+ _ifxhc->is_in = 1;
-+ _ifxhc->xfer_len = 0;
-+ _ifxhc->xfer_buff = _ifxhcd->status_buf;
-+ }
-+ if(_ifxhc->is_in)
-+ _ifxhc->short_rw =0;
-+ else
-+ _ifxhc->short_rw =(urb->transfer_flags & URB_ZERO_PACKET)?1:0;
-+ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
-+ _ifxhc->xfer_count = 0;
-+ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
-+ /*== AVM/BC 20101111 Lock not needed ==*/
-+ process_channels_sub(_ifxhcd);
-+ break;
-+ case IFXHCD_CONTROL_DATA:
-+ urb_xfer_done = update_urb_state_xfer_comp(_ifxhc, hc_regs, urb, _urbd);
-+ if (urb_xfer_done)
-+ {
-+ _ifxhc->control_phase = IFXHCD_CONTROL_STATUS;
-+ _ifxhc->is_in = (_urbd->is_in)?0:1;
-+ _ifxhc->xfer_len = 0;
-+ _ifxhc->xfer_count = 0;
-+ _ifxhc->xfer_buff = _ifxhcd->status_buf;
-+ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
-+ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
-+ if(_ifxhc->is_in)
-+ _ifxhc->short_rw =0;
-+ else
-+ _ifxhc->short_rw =1;
-+ }
-+ else // continue
-+ {
-+ _ifxhc->xfer_len = _urbd->xfer_len - urb->actual_length;
-+ _ifxhc->xfer_count = urb->actual_length;
-+ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
-+ _ifxhc->data_pid_start = read_data_toggle(hc_regs);
-+ }
-+ /*== AVM/BC 20101111 Lock not needed ==*/
-+ process_channels_sub(_ifxhcd);
-+ break;
-+ case IFXHCD_CONTROL_STATUS:
-+ if (urb->status == -EINPROGRESS)
-+ urb->status = 0;
-+ release_channel(_ifxhcd,_ifxhc,HC_XFER_URB_COMPLETE);
-+ break;
-+ }
-+ break;
-+ case IFXUSB_EP_TYPE_BULK:
-+ IFX_DEBUGPL(DBG_HCDV, " Bulk transfer complete\n");
-+ urb_xfer_done = update_urb_state_xfer_comp(_ifxhc, hc_regs, urb, _urbd);
-+ if (urb_xfer_done)
-+ release_channel(_ifxhcd,_ifxhc,HC_XFER_URB_COMPLETE);
-+ else
-+ {
-+ _ifxhc->xfer_len = _urbd->xfer_len - urb->actual_length;
-+ _ifxhc->xfer_count = urb->actual_length;
-+ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
-+ _ifxhc->data_pid_start = read_data_toggle(hc_regs);
-+ /*== AVM/BC 20101111 Lock not needed ==*/
-+ process_channels_sub(_ifxhcd);
-+ }
-+ break;
-+ case IFXUSB_EP_TYPE_INTR:
-+ urb_xfer_done = update_urb_state_xfer_comp(_ifxhc, hc_regs, urb, _urbd);
-+ release_channel(_ifxhcd,_ifxhc,HC_XFER_URB_COMPLETE);
-+ break;
-+ case IFXUSB_EP_TYPE_ISOC:
-+// if (_urbd->isoc_split_pos == IFXUSB_HCSPLIT_XACTPOS_ALL)
-+// halt_status = update_isoc_urb_state(_ifxhcd, _ifxhc, hc_regs, _urbd, HC_XFER_COMPLETE);
-+// complete_periodic_xfer(_ifxhcd, _ifxhc, hc_regs, _urbd, halt_status);
-+ urb_xfer_done = update_urb_state_xfer_comp(_ifxhc, hc_regs, urb, _urbd);
-+ release_channel(_ifxhcd,_ifxhc,HC_XFER_URB_COMPLETE);
-+ break;
-+ }
-+}
-+
-+
-+
-+void showint(uint32_t val_hcint
-+ ,uint32_t val_hcintmsk
-+ ,uint32_t val_hctsiz)
-+{
-+#ifdef __DEBUG__
-+ hcint_data_t hcint = {.d32 = val_hcint};
-+ hcint_data_t hcintmsk = {.d32 = val_hcintmsk};
-+
-+ printk(KERN_INFO " WITH FLAG: Sz:%08x I:%08X/M:%08X %s%s%s%s%s%s%s%s%s%s\n"
-+ ,val_hctsiz,hcint.d32 ,hcintmsk.d32
-+ ,(hcint.b.datatglerr || hcintmsk.b.datatglerr)?
-+ (
-+ (hcint.b.datatglerr && hcintmsk.b.datatglerr)?"datatglerr[*/*] ":
-+ (
-+ (hcint.b.datatglerr)?"datatglerr[*/] ":"datatglerr[/*] "
-+ )
-+ )
-+ :""
-+ ,(hcint.b.frmovrun || hcintmsk.b.frmovrun)?
-+ (
-+ (hcint.b.frmovrun && hcintmsk.b.frmovrun)?"frmovrun[*/*] ":
-+ (
-+ (hcint.b.frmovrun)?"frmovrun[*/] ":"frmovrun[/*] "
-+ )
-+ )
-+ :""
-+ ,(hcint.b.bblerr || hcintmsk.b.bblerr)?
-+ (
-+ (hcint.b.bblerr && hcintmsk.b.bblerr)?"bblerr[*/*] ":
-+ (
-+ (hcint.b.bblerr)?"bblerr[*/] ":"bblerr[/*] "
-+ )
-+ )
-+ :""
-+ ,(hcint.b.xacterr || hcintmsk.b.xacterr)?
-+ (
-+ (hcint.b.xacterr && hcintmsk.b.xacterr)?"xacterr[*/*] ":
-+ (
-+ (hcint.b.xacterr)?"xacterr[*/] ":"xacterr[/*] "
-+ )
-+ )
-+ :""
-+ ,(hcint.b.nyet || hcintmsk.b.nyet)?
-+ (
-+ (hcint.b.nyet && hcintmsk.b.nyet)?"nyet[*/*] ":
-+ (
-+ (hcint.b.nyet)?"nyet[*/] ":"nyet[/*] "
-+ )
-+ )
-+ :""
-+ ,(hcint.b.nak || hcintmsk.b.nak)?
-+ (
-+ (hcint.b.nak && hcintmsk.b.nak)?"nak[*/*] ":
-+ (
-+ (hcint.b.nak)?"nak[*/] ":"nak[/*] "
-+ )
-+ )
-+ :""
-+ ,(hcint.b.ack || hcintmsk.b.ack)?
-+ (
-+ (hcint.b.ack && hcintmsk.b.ack)?"ack[*/*] ":
-+ (
-+ (hcint.b.ack)?"ack[*/] ":"ack[/*] "
-+ )
-+ )
-+ :""
-+ ,(hcint.b.stall || hcintmsk.b.stall)?
-+ (
-+ (hcint.b.stall && hcintmsk.b.stall)?"stall[*/*] ":
-+ (
-+ (hcint.b.stall)?"stall[*/] ":"stall[/*] "
-+ )
-+ )
-+ :""
-+ ,(hcint.b.ahberr || hcintmsk.b.ahberr)?
-+ (
-+ (hcint.b.ahberr && hcintmsk.b.ahberr)?"ahberr[*/*] ":
-+ (
-+ (hcint.b.ahberr)?"ahberr[*/] ":"ahberr[/*] "
-+ )
-+ )
-+ :""
-+ ,(hcint.b.xfercomp || hcintmsk.b.xfercomp)?
-+ (
-+ (hcint.b.xfercomp && hcintmsk.b.xfercomp)?"xfercomp[*/*] ":
-+ (
-+ (hcint.b.xfercomp)?"xfercomp[*/] ":"xfercomp[/*] "
-+ )
-+ )
-+ :""
-+ );
-+#endif
-+}
-+
-+
-+extern void ifxhcd_hc_dumb_rx(ifxusb_core_if_t *_core_if, ifxhcd_hc_t *_ifxhc,uint8_t *dump_buf);
-+
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+static int32_t chhltd_ctrlbulk_rx_nonsplit(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ hcint_data_t hcint;
-+ hcint_data_t hcintmsk;
-+ hctsiz_data_t hctsiz;
-+
-+ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
-+ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
-+ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-+
-+ disable_hc_int(_hc_regs,ack);
-+ disable_hc_int(_hc_regs,nak);
-+ disable_hc_int(_hc_regs,nyet);
-+ _ifxhc->do_ping = 0;
-+
-+ if(_ifxhc->halt_status == HC_XFER_NAK)
-+ {
-+ if(_ifxhc->nak_retry_r)
-+ {
-+ _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
-+ _ifxhc->nak_retry--;
-+ if(_ifxhc->nak_retry)
-+ {
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
-+ _ifxhc->wait_for_sof = 1;
-+ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ else
-+ {
-+ _ifxhc->wait_for_sof = 0;
-+ release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status);
-+ }
-+ }
-+ else
-+ {
-+ _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
-+ _ifxhc->wait_for_sof = 1;
-+ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ return 1;
-+ }
-+
-+ if (hcint.b.xfercomp)
-+ {
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ return 1;
-+ }
-+ else if (hcint.b.stall)
-+ {
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ // ZLP shortcut
-+ #if 0
-+ if(hctsiz.b.pktcnt==0)
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ else
-+ #endif
-+ {
-+ // Stall FIFO compensation.
-+ #if 0
-+ int sz1,sz2;
-+ sz2=_ifxhc->start_pkt_count - hctsiz.b.pktcnt;
-+ sz2*=_ifxhc->mps;
-+ sz1=_ifxhc->xfer_len - hctsiz.b.xfersize;
-+ sz2-=sz1;
-+ if(sz2)
-+ ifxhcd_hc_dumb_rx(&_ifxhcd->core_if, _ifxhc,_ifxhc->epqh->dump_buf);
-+ #endif
-+ _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
-+ }
-+ return 1;
-+ }
-+ else if (hcint.b.bblerr)
-+ {
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+
-+ // ZLP shortcut
-+ #if 0
-+ if(hctsiz.b.pktcnt==0)
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ else
-+ #endif
-+ _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
-+ return 1;
-+ }
-+ else if (hcint.b.xacterr)
-+ {
-+ // ZLP shortcut
-+ #if 1
-+ if(hctsiz.b.pktcnt==0)
-+ {
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ }
-+ else
-+ #endif
-+ {
-+ _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
-+
-+ /* 20110803 AVM/WK FIX: Reset error count on any handshake */
-+ if (hcint.b.nak || hcint.b.nyet || hcint.b.ack) {
-+ _urbd->error_count = 1;
-+ } else {
-+ _urbd->error_count++;
-+ }
-+
-+ if (_urbd->error_count >= 3)
-+ {
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
-+ }
-+ else
-+ {
-+ _ifxhc->wait_for_sof = 1;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ }
-+ return 1;
-+ }
-+ else if(hcint.b.datatglerr )
-+ {
-+ _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
-+ #if 1
-+ if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0)
-+ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
-+ else
-+ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
-+ _ifxhc->wait_for_sof = 1;
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ #else
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
-+ #endif
-+ return 1;
-+ }
-+ else if(hcint.b.frmovrun )
-+ {
-+IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT0 FRMOVRUN [should be Period only]\n",__func__,__LINE__);
-+showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
-+ return 1;
-+ }
-+ else if(hcint.b.nyet )
-+ {
-+IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT0 NYET [should be Out only]\n",__func__,__LINE__);
-+showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
-+ }
-+ return 0;
-+}
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+static int32_t chhltd_ctrlbulk_tx_nonsplit(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ hcint_data_t hcint;
-+ hcint_data_t hcintmsk;
-+ hctsiz_data_t hctsiz;
-+ int out_nak_enh = 0;
-+
-+#ifdef __DEBUG__
-+static int first=0;
-+#endif
-+
-+ if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
-+ out_nak_enh = 1;
-+
-+ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
-+ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
-+ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-+
-+#ifdef __DEBUG__
-+if(!first&& _ifxhc->ep_type == IFXUSB_EP_TYPE_BULK
-+ &&(hcint.b.stall || hcint.b.datatglerr || hcint.b.frmovrun || hcint.b.bblerr || hcint.b.xacterr) && !hcint.b.ack)
-+{
-+ showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
-+ first=1;
-+ printk(KERN_INFO " [%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X] \n"
-+ ,*(_ifxhc->xfer_buff+ 0),*(_ifxhc->xfer_buff+ 1),*(_ifxhc->xfer_buff+ 2),*(_ifxhc->xfer_buff+ 3)
-+ ,*(_ifxhc->xfer_buff+ 4),*(_ifxhc->xfer_buff+ 5),*(_ifxhc->xfer_buff+ 6),*(_ifxhc->xfer_buff+ 7)
-+ ,*(_ifxhc->xfer_buff+ 8),*(_ifxhc->xfer_buff+ 9),*(_ifxhc->xfer_buff+10),*(_ifxhc->xfer_buff+11)
-+ ,*(_ifxhc->xfer_buff+12),*(_ifxhc->xfer_buff+13),*(_ifxhc->xfer_buff+14),*(_ifxhc->xfer_buff+15));
-+
-+ printk(KERN_INFO " [_urbd->urb->actual_length:%08X _ifxhc->start_pkt_count:%08X hctsiz.b.pktcnt:%08X ,_urbd->xfer_len:%08x] \n"
-+ ,_urbd->urb->actual_length
-+ ,_ifxhc->start_pkt_count
-+ ,hctsiz.b.pktcnt
-+ ,_urbd->xfer_len);
-+}
-+#endif
-+
-+ if(_ifxhc->halt_status == HC_XFER_NAK)
-+ {
-+ if(_ifxhc->nak_retry_r)
-+ {
-+ _ifxhc->nak_retry--;
-+ if(_ifxhc->nak_retry)
-+ {
-+ if(_ifxhc->xfer_len!=0)
-+ _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
-+ _ifxhc->wait_for_sof = 1;
-+ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ else
-+ {
-+ _ifxhc->wait_for_sof = 0;
-+ release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status);
-+ }
-+ }
-+ else
-+ {
-+ if(_ifxhc->xfer_len!=0)
-+ _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
-+ _ifxhc->wait_for_sof = 1;
-+ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ return 1;
-+ }
-+
-+ if (hcint.b.xfercomp)
-+ {
-+ disable_hc_int(_hc_regs,ack);
-+ disable_hc_int(_hc_regs,nak);
-+ disable_hc_int(_hc_regs,nyet);
-+ _urbd->error_count =0;
-+ if(_ifxhc->xfer_len==0 && !hcint.b.ack && hcint.b.nak)
-+ {
-+ // Walkaround: When sending ZLP and receive NAK but also issue CMPT intr
-+ // Solution: NoSplit: Resend at next SOF
-+ // Split : Resend at next SOF with SSPLIT
-+ if(hcint.b.nyet && !out_nak_enh)
-+ _ifxhc->do_ping = 1;
-+ else
-+ _ifxhc->do_ping = 0;
-+ _ifxhc->xfer_len = 0;
-+ _ifxhc->xfer_count = 0;
-+ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
-+ _ifxhc->wait_for_sof = 1;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ else
-+ {
-+ _ifxhc->wait_for_sof = 0;
-+ _ifxhc->do_ping = 0;
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ }
-+ return 1;
-+ }
-+ else if (hcint.b.stall)
-+ {
-+ disable_hc_int(_hc_regs,ack);
-+ disable_hc_int(_hc_regs,nak);
-+ disable_hc_int(_hc_regs,nyet);
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ _ifxhc->do_ping =0;
-+
-+ // ZLP shortcut
-+ #if 1
-+ if(hctsiz.b.pktcnt==0)
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ else
-+ #endif
-+ {
-+ if(_ifxhc->xfer_len!=0)
-+ _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
-+ }
-+ return 1;
-+ }
-+ else if (hcint.b.xacterr)
-+ {
-+ // ZLP shortcut
-+ #if 1
-+ if(hctsiz.b.pktcnt==0)
-+ {
-+ disable_hc_int(_hc_regs,ack);
-+ disable_hc_int(_hc_regs,nak);
-+ disable_hc_int(_hc_regs,nyet);
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ _ifxhc->do_ping =0;
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ }
-+ else
-+ #endif
-+ {
-+ if(_ifxhc->xfer_len!=0)
-+ _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
-+
-+ if (hcint.b.nak || hcint.b.nyet || hcint.b.ack)
-+ {
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =1;
-+ enable_hc_int(_hc_regs,ack);
-+ enable_hc_int(_hc_regs,nak);
-+ enable_hc_int(_hc_regs,nyet);
-+ if(!out_nak_enh)
-+ _ifxhc->do_ping =1;
-+ else
-+ _ifxhc->do_ping =0;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ else
-+ {
-+ _urbd->error_count ++ ;
-+ if (_urbd->error_count == 3)
-+ {
-+ disable_hc_int(_hc_regs,ack);
-+ disable_hc_int(_hc_regs,nak);
-+ disable_hc_int(_hc_regs,nyet);
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ _ifxhc->do_ping =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
-+ }
-+ else
-+ {
-+ enable_hc_int(_hc_regs,ack);
-+ enable_hc_int(_hc_regs,nak);
-+ enable_hc_int(_hc_regs,nyet);
-+ _ifxhc->wait_for_sof =1;
-+ if(!out_nak_enh)
-+ _ifxhc->do_ping =1;
-+ else
-+ _ifxhc->do_ping =0;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ }
-+ }
-+ return 1;
-+ }
-+ else if(hcint.b.bblerr )
-+ {
-+IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT0 BABBLE [should be IN only]\n",__func__,__LINE__);
-+showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
-+ _ifxhc->do_ping = 0;
-+ if(_ifxhc->xfer_len!=0)
-+ _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
-+ return 1;
-+ }
-+ else if(hcint.b.nak || hcint.b.nyet)
-+ {
-+ if(!out_nak_enh)
-+ {
-+ // ZLP shortcut
-+ #if 1
-+ if(hctsiz.b.pktcnt==0)
-+ {
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ _ifxhc->do_ping =0;
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ }
-+ else
-+ #endif
-+ {
-+ if(!out_nak_enh)
-+ _ifxhc->do_ping =1;
-+ else
-+ _ifxhc->do_ping =0;
-+ if(_ifxhc->xfer_len!=0)
-+ {
-+ _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ }
-+ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
-+ _ifxhc->wait_for_sof = 1;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ return 1;
-+ }
-+ }
-+ else if(hcint.b.datatglerr )
-+ {
-+IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT0 DATATGLERR [should be IN only]\n",__func__,__LINE__);
-+showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ _ifxhc->do_ping =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
-+ return 1;
-+ }
-+ else if(hcint.b.frmovrun )
-+ {
-+IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT0 FRMOVRUN [should be PERIODIC only]\n",__func__,__LINE__);
-+showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ _ifxhc->do_ping =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
-+ return 1;
-+ }
-+ return 0;
-+}
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+static int32_t chhltd_intr_rx_nonsplit(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ hcint_data_t hcint;
-+ hcint_data_t hcintmsk;
-+ hctsiz_data_t hctsiz;
-+
-+ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
-+ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
-+ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-+ disable_hc_int(_hc_regs,ack);
-+ disable_hc_int(_hc_regs,nak);
-+ disable_hc_int(_hc_regs,nyet);
-+ _ifxhc->do_ping =0;
-+
-+ if(_ifxhc->halt_status == HC_XFER_NAK)
-+ {
-+ if(_ifxhc->nak_retry_r)
-+ {
-+ _ifxhc->nak_retry--;
-+ if(_ifxhc->nak_retry)
-+ {
-+ if(_ifxhc->xfer_len!=0)
-+ _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
-+ _ifxhc->wait_for_sof = 1;
-+ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ else
-+ {
-+ _ifxhc->wait_for_sof = 0;
-+ release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status);
-+ }
-+ }
-+ else
-+ {
-+ if(_ifxhc->xfer_len!=0)
-+ _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
-+ _ifxhc->wait_for_sof = 1;
-+ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ return 1;
-+ }
-+
-+ if(hcint.b.xfercomp )
-+ {
-+ _urbd->error_count =0;
-+ //restart INTR immediately
-+ #if 1
-+ if(hctsiz.b.pktcnt>0)
-+ {
-+ // TODO Re-initialize Channel (in next b_interval - 1 uF/F)
-+ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
-+ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ else
-+ #endif
-+ {
-+ _ifxhc->wait_for_sof =0;
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ }
-+ return 1;
-+ }
-+ else if (hcint.b.stall)
-+ {
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+
-+ // Don't care shortcut
-+ #if 0
-+ if(hctsiz.b.pktcnt==0)
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ else
-+ #endif
-+ {
-+ // Stall FIFO compensation.
-+ #if 0
-+ int sz1,sz2;
-+ sz2=_ifxhc->start_pkt_count - hctsiz.b.pktcnt;
-+ sz2*=_ifxhc->mps;
-+ sz1=_ifxhc->xfer_len - hctsiz.b.xfersize;
-+ sz2-=sz1;
-+ if(sz2)
-+ ifxhcd_hc_dumb_rx(&_ifxhcd->core_if, _ifxhc,_ifxhc->epqh->dump_buf);
-+ #endif
-+ _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
-+ }
-+ return 1;
-+ }
-+
-+
-+ else if (hcint.b.bblerr)
-+ {
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+
-+ // Don't care shortcut
-+ #if 0
-+ if(hctsiz.b.pktcnt==0)
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ else
-+ #endif
-+ {
-+ _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
-+ }
-+ return 1;
-+ }
-+ else if (hcint.b.nak || hcint.b.datatglerr || hcint.b.frmovrun)
-+ {
-+ _urbd->error_count =0;
-+ //restart INTR immediately
-+ #if 1
-+ if(hctsiz.b.pktcnt>0)
-+ {
-+ // TODO Re-initialize Channel (in next b_interval - 1 uF/F)
-+ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
-+ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ else
-+ #endif
-+ {
-+ _ifxhc->wait_for_sof =0;
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ }
-+ return 1;
-+ }
-+ else if (hcint.b.xacterr)
-+ {
-+ // ZLP shortcut
-+ #if 1
-+ if(hctsiz.b.pktcnt==0)
-+ {
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ }
-+ else
-+ #endif
-+ {
-+ /* 20110803 AVM/WK FIX: Reset error count on any handshake */
-+ if (hcint.b.nak || hcint.b.nyet || hcint.b.ack) {
-+ _urbd->error_count = 1;
-+ } else {
-+ _urbd->error_count++;
-+ }
-+
-+ if(_urbd->error_count>=3)
-+ {
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
-+ }
-+ else
-+ {
-+ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ }
-+ return 1;
-+ }
-+ else if(hcint.b.nyet )
-+ {
-+IFX_WARN("%s() %d Warning INTR IN SPLIT0 NYET [should be OUT only]\n",__func__,__LINE__);
-+showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
-+ return 1;
-+ }
-+ return 0;
-+}
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+static int32_t chhltd_intr_tx_nonsplit(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ hcint_data_t hcint;
-+ hcint_data_t hcintmsk;
-+ hctsiz_data_t hctsiz;
-+ int out_nak_enh = 0;
-+
-+ if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
-+ out_nak_enh = 1;
-+
-+ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
-+ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
-+ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-+
-+ if(_ifxhc->halt_status == HC_XFER_NAK)
-+ {
-+ if(_ifxhc->nak_retry_r)
-+ {
-+ _ifxhc->nak_retry--;
-+ if(_ifxhc->nak_retry)
-+ {
-+ if(_ifxhc->xfer_len!=0)
-+ _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
-+ _ifxhc->wait_for_sof = 1;
-+ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ else
-+ {
-+ _ifxhc->wait_for_sof = 0;
-+ release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status);
-+ }
-+ }
-+ else
-+ {
-+ if(_ifxhc->xfer_len!=0)
-+ _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
-+ _ifxhc->wait_for_sof = 1;
-+ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ return 1;
-+ }
-+
-+ if(hcint.b.xfercomp )
-+ {
-+ disable_hc_int(_hc_regs,ack);
-+ disable_hc_int(_hc_regs,nak);
-+ disable_hc_int(_hc_regs,nyet);
-+ _urbd->error_count =0;
-+ //restart INTR immediately
-+ #if 0
-+ if(hctsiz.b.pktcnt>0)
-+ {
-+ // TODO Re-initialize Channel (in next b_interval - 1 uF/F)
-+ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
-+ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
-+ if(hcint.b.nyet && !out_nak_enh )
-+ _ifxhc->do_ping =1;
-+ else
-+ _ifxhc->do_ping =0;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ else
-+ #endif
-+ {
-+ _ifxhc->wait_for_sof =0;
-+ _ifxhc->do_ping =0;
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ }
-+ return 1;
-+ }
-+ else if (hcint.b.stall)
-+ {
-+ disable_hc_int(_hc_regs,ack);
-+ disable_hc_int(_hc_regs,nyet);
-+ disable_hc_int(_hc_regs,nak);
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ _ifxhc->do_ping =0;
-+
-+ // Don't care shortcut
-+ #if 0
-+ if(hctsiz.b.pktcnt==0)
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ else
-+ #endif
-+ {
-+ if(_ifxhc->xfer_len!=0)// !_ifxhc->is_in
-+ _urbd->urb->actual_length += ((_ifxhc->start_pkt_count - hctsiz.b.pktcnt ) * _ifxhc->mps);
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
-+ }
-+ return 1;
-+ }
-+ else if(hcint.b.nak || hcint.b.frmovrun )
-+ {
-+ disable_hc_int(_hc_regs,ack);
-+ disable_hc_int(_hc_regs,nyet);
-+ disable_hc_int(_hc_regs,nak);
-+ _urbd->error_count =0;
-+ //restart INTR immediately
-+ #if 0
-+ if(hctsiz.b.pktcnt>0)
-+ {
-+ // TODO Re-initialize Channel (in next b_interval - 1 uF/F)
-+ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
-+ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
-+ if(!out_nak_enh )
-+ _ifxhc->do_ping =1;
-+ else
-+ _ifxhc->do_ping =0;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ else
-+ #endif
-+ {
-+ _ifxhc->wait_for_sof =0;
-+ _ifxhc->do_ping =0;
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ }
-+ return 1;
-+ }
-+ else if(hcint.b.xacterr )
-+ {
-+ // ZLP shortcut
-+ #if 1
-+ if(hctsiz.b.pktcnt==0)
-+ {
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ _ifxhc->do_ping =0;
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ }
-+ else
-+ #endif
-+ {
-+ /* 20110803 AVM/WK FIX: Reset error count on any handshake */
-+ if (hcint.b.nak || hcint.b.nyet || hcint.b.ack) {
-+ _urbd->error_count = 1;
-+ } else {
-+ _urbd->error_count++;
-+ }
-+
-+ if(_urbd->error_count>=3)
-+ {
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ _ifxhc->do_ping =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
-+ }
-+ else
-+ {
-+ //_ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
-+ //if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
-+ _ifxhc->wait_for_sof=1;
-+ if(!out_nak_enh )
-+ _ifxhc->do_ping =1;
-+ else
-+ _ifxhc->do_ping =0;
-+
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ }
-+ return 1;
-+ }
-+ else if(hcint.b.bblerr )
-+ {
-+IFX_WARN("%s() %d Warning INTR OUT SPLIT0 BABBLEERR [should be IN only]\n",__func__,__LINE__);
-+showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ _ifxhc->do_ping =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
-+ return 1;
-+ }
-+ else if(hcint.b.datatglerr )
-+ {
-+IFX_WARN("%s() %d Warning INTR OUT SPLIT0 DATATGLERR\n",__func__,__LINE__);
-+showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ _ifxhc->do_ping =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
-+ return 1;
-+ }
-+ return 0;
-+}
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+static int32_t chhltd_isoc_rx_nonsplit(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ #if defined(__EN_ISOC__)
-+ hcint_data_t hcint;
-+ hcint_data_t hcintmsk;
-+ hctsiz_data_t hctsiz;
-+
-+ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
-+ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
-+ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-+
-+ if (hcint.b.xfercomp || hcint.b.frmovrun)
-+ {
-+ _urbd->error_count=0;
-+ disable_hc_int(_hc_regs,ack);
-+ disable_hc_int(_hc_regs,nak);
-+ disable_hc_int(_hc_regs,nyet);
-+ _ifxhc->wait_for_sof = 0;
-+ if (hcint.b.xfercomp)
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ else
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
-+ }
-+ else if (hcint.b.xacterr || hcint.b.bblerr)
-+ {
-+ #ifndef VR9Skip
-+ if(hctsiz.b.pktcnt==0)
-+ {
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ }
-+ else
-+ {
-+ int sz1,sz2;
-+ sz2=_ifxhc->start_pkt_count - hctsiz.b.pktcnt;
-+ sz2*=_ifxhc->mps;
-+ sz1=_ifxhc->xfer_len - hctsiz.b.xfersize;
-+ sz2-=sz1;
-+ if(sz2)
-+ ifxhcd_hc_dumb_rx(&_ifxhcd->core_if, _ifxhc,_ifxhc->epqh->dump_buf);
-+ _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
-+ _urbd->error_count++;
-+ if(_urbd->error_count>=3)
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->wait_for_sof = 0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
-+ }
-+ else
-+ {
-+ _ifxhc->wait_for_sof = 1;
-+ enable_hc_int(_hc_regs,ack);
-+ enable_hc_int(_hc_regs,nak);
-+ enable_hc_int(_hc_regs,nyet);
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ }
-+ #endif
-+ }
-+ else if(hcint.b.datatglerr )
-+ {
-+ warning
-+ }
-+ else if(hcint.b.stall )
-+ {
-+ warning
-+ }
-+ #else
-+ #endif
-+ return 0;
-+}
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+static int32_t chhltd_isoc_tx_nonsplit(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ #if defined(__EN_ISOC__)
-+ hcint_data_t hcint;
-+ hcint_data_t hcintmsk;
-+ hctsiz_data_t hctsiz;
-+ int out_nak_enh = 0;
-+
-+ if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
-+ out_nak_enh = 1;
-+
-+ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
-+ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
-+ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-+
-+ if (hcint.b.xfercomp)
-+ {
-+ _urbd->error_count=0;
-+ disable_hc_int(_hc_regs,ack);
-+ disable_hc_int(_hc_regs,nak);
-+ disable_hc_int(_hc_regs,nyet);
-+ _ifxhc->wait_for_sof = 0;
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ return 1;
-+ }
-+ else if (hcint.b.frmovrun)
-+ {
-+ #ifndef VR9Skip
-+ _urbd->error_count=0;
-+ disable_hc_int(_hc_regs,ack);
-+ disable_hc_int(_hc_regs,nak);
-+ disable_hc_int(_hc_regs,nyet);
-+ _ifxhc->wait_for_sof = 0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
-+ #endif
-+ }
-+ else if(hcint.b.datatglerr )
-+ {
-+ warning
-+ }
-+ else if(hcint.b.bblerr )
-+ {
-+ #ifndef VR9Skip
-+ if(hctsiz.b.pktcnt==0)
-+ {
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ }
-+ else
-+ {
-+ int sz1,sz2;
-+ sz2=_ifxhc->start_pkt_count - hctsiz.b.pktcnt;
-+ sz2*=_ifxhc->mps;
-+ sz1=_ifxhc->xfer_len - hctsiz.b.xfersize;
-+ sz2-=sz1;
-+ if(sz2)
-+ ifxhcd_hc_dumb_rx(&_ifxhcd->core_if, _ifxhc,_ifxhc->epqh->dump_buf);
-+ _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
-+ _urbd->error_count++;
-+ if(_urbd->error_count>=3)
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->wait_for_sof = 0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
-+ }
-+ else
-+ {
-+ _ifxhc->wait_for_sof = 1;
-+ enable_hc_int(_hc_regs,ack);
-+ enable_hc_int(_hc_regs,nak);
-+ enable_hc_int(_hc_regs,nyet);
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ }
-+ #endif
-+ }
-+ else if(hcint.b.xacterr )
-+ {
-+ if(hctsiz.b.pktcnt==0)
-+ {
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ return 1;
-+ }
-+ _urbd->error_count++;
-+ if(_urbd->error_count>=3)
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->wait_for_sof = 0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
-+ }
-+ else
-+ {
-+ _ifxhc->wait_for_sof = 1;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ return 1;
-+ }
-+ else if(hcint.b.stall )
-+ {
-+ warning
-+ }
-+ #else
-+ #endif
-+ return 0;
-+}
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+static int32_t chhltd_ctrlbulk_rx_ssplit(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ hcint_data_t hcint;
-+ hcint_data_t hcintmsk;
-+ hctsiz_data_t hctsiz;
-+
-+ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
-+ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
-+ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-+
-+ disable_hc_int(_hc_regs,ack);
-+ disable_hc_int(_hc_regs,nak);
-+ disable_hc_int(_hc_regs,nyet);
-+
-+ _ifxhc->do_ping =0;
-+
-+ if (hcint.b.ack)
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->split=2;
-+ _ifxhc->wait_for_sof = 8;
-+ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ else if (hcint.b.nak)
-+ {
-+ _ifxhc->wait_for_sof = 1;
-+ _urbd->error_count = 0;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ else if (hcint.b.xacterr)
-+ {
-+ _urbd->error_count++;
-+ if(_urbd->error_count>=3)
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->wait_for_sof =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
-+ }
-+ else
-+ {
-+ _ifxhc->wait_for_sof =1;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ return 1;
-+ }
-+ else if(hcint.b.bblerr )
-+ {
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
-+ return 1;
-+ }
-+ else if(hcint.b.stall )
-+ {
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
-+ return 1;
-+ }
-+ else if(hcint.b.datatglerr )
-+ {
-+IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT1 HC_XFER_DATA_TOGGLE_ERR\n",__func__,__LINE__);
-+showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
-+ return 1;
-+ }
-+ else if(hcint.b.frmovrun )
-+ {
-+IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT1 HC_XFER_FRAME_OVERRUN\n",__func__,__LINE__);
-+showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
-+ return 1;
-+ }
-+ else if(hcint.b.nyet )
-+ {
-+IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT1 NYET\n",__func__,__LINE__);
-+showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
-+ }
-+ else if(hcint.b.xfercomp )
-+ {
-+IFX_WARN("%s() %d Warning CTRLBULK IN SPLIT1 COMPLETE\n",__func__,__LINE__);
-+showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
-+ }
-+ return 0;
-+}
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+static int32_t chhltd_ctrlbulk_tx_ssplit(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ hcint_data_t hcint;
-+ hcint_data_t hcintmsk;
-+ hctsiz_data_t hctsiz;
-+ int out_nak_enh = 0;
-+
-+#ifdef __DEBUG__
-+static int first=0;
-+#endif
-+
-+ if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
-+ out_nak_enh = 1;
-+
-+ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
-+ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
-+ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-+ disable_hc_int(_hc_regs,ack);
-+ disable_hc_int(_hc_regs,nak);
-+ disable_hc_int(_hc_regs,nyet);
-+
-+#ifdef __DEBUG__
-+ if(!first&& _ifxhc->ep_type == IFXUSB_EP_TYPE_BULK
-+ &&(hcint.b.stall || hcint.b.datatglerr || hcint.b.frmovrun || hcint.b.bblerr || hcint.b.xacterr) && !hcint.b.ack)
-+ {
-+ showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
-+ first=1;
-+ printk(KERN_INFO " [%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X] \n"
-+ ,*(_ifxhc->xfer_buff+ 0),*(_ifxhc->xfer_buff+ 1),*(_ifxhc->xfer_buff+ 2),*(_ifxhc->xfer_buff+ 3)
-+ ,*(_ifxhc->xfer_buff+ 4),*(_ifxhc->xfer_buff+ 5),*(_ifxhc->xfer_buff+ 6),*(_ifxhc->xfer_buff+ 7)
-+ ,*(_ifxhc->xfer_buff+ 8),*(_ifxhc->xfer_buff+ 9),*(_ifxhc->xfer_buff+10),*(_ifxhc->xfer_buff+11)
-+ ,*(_ifxhc->xfer_buff+12),*(_ifxhc->xfer_buff+13),*(_ifxhc->xfer_buff+14),*(_ifxhc->xfer_buff+15));
-+
-+ printk(KERN_INFO " [_urbd->urb->actual_length:%08X _ifxhc->start_pkt_count:%08X hctsiz.b.pktcnt:%08X ,_urbd->xfer_len:%08x] \n"
-+ ,_urbd->urb->actual_length
-+ ,_ifxhc->start_pkt_count
-+ ,hctsiz.b.pktcnt
-+ ,_urbd->xfer_len);
-+ }
-+#endif
-+
-+ if (hcint.b.ack )
-+ {
-+ _urbd->error_count=0;
-+ if (_ifxhc->ep_type == IFXUSB_EP_TYPE_BULK || _ifxhc->control_phase != IFXHCD_CONTROL_SETUP)
-+ _ifxhc->ssplit_out_xfer_count = _ifxhc->xfer_len;
-+ _ifxhc->split=2;
-+ _ifxhc->wait_for_sof =8;
-+ _ifxhc->data_pid_start =read_data_toggle(_hc_regs);
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ else if(hcint.b.nyet)
-+ {
-+IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT1 NYET\n",__func__,__LINE__);
-+showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
-+ _urbd->error_count=0;
-+ if (_ifxhc->ep_type == IFXUSB_EP_TYPE_BULK || _ifxhc->control_phase != IFXHCD_CONTROL_SETUP)
-+ _ifxhc->ssplit_out_xfer_count = _ifxhc->xfer_len;
-+ _ifxhc->split=2;
-+ _ifxhc->wait_for_sof =1;
-+ _ifxhc->data_pid_start =read_data_toggle(_hc_regs);
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ else if(hcint.b.nak )
-+ {
-+ _ifxhc->wait_for_sof =1;
-+ if(!out_nak_enh )
-+ _ifxhc->do_ping =1;
-+ else
-+ _ifxhc->do_ping =0;
-+ _urbd->error_count =0;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ else if(hcint.b.xacterr )
-+ {
-+ _urbd->error_count++;
-+ if(_urbd->error_count>=3)
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->wait_for_sof =0;
-+ _ifxhc->do_ping =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
-+ }
-+ else
-+ {
-+ _ifxhc->wait_for_sof =1;
-+ _ifxhc->do_ping =1;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ return 1;
-+ }
-+ else if(hcint.b.datatglerr )
-+ {
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ _ifxhc->do_ping =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
-+ return 1;
-+ }
-+ else if(hcint.b.bblerr )
-+ {
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ _ifxhc->do_ping =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
-+ return 1;
-+ }
-+ else if(hcint.b.stall )
-+ {
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ _ifxhc->do_ping =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
-+ return 1;
-+ }
-+ else if(hcint.b.frmovrun )
-+ {
-+IFX_WARN("%s() %d Warning CTRLBULK OUT SPLIT1 HC_XFER_FRAME_OVERRUN\n",__func__,__LINE__);
-+showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ _ifxhc->do_ping =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
-+ return 1;
-+ }
-+ else if(hcint.b.xfercomp )
-+ {
-+ printk(KERN_INFO "%s() %d Warning CTRLBULK OUT SPLIT1 COMPLETE\n",__func__,__LINE__);
-+ }
-+ return 0;
-+}
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+static int32_t chhltd_intr_rx_ssplit(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ hcint_data_t hcint;
-+ hcint_data_t hcintmsk;
-+ hctsiz_data_t hctsiz;
-+
-+ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
-+ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
-+ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-+
-+ disable_hc_int(_hc_regs,ack);
-+ disable_hc_int(_hc_regs,nak);
-+ disable_hc_int(_hc_regs,nyet);
-+
-+ _ifxhc->do_ping =0;
-+
-+ if (hcint.b.ack )
-+ {
-+ /*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/
-+ _ifxhc->nyet_count=0;
-+
-+ _urbd->error_count=0;
-+ _ifxhc->split=2;
-+ _ifxhc->wait_for_sof = 0;
-+ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ else if(hcint.b.nak )
-+ {
-+ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
-+ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
-+ _urbd->error_count=0;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ else if(hcint.b.xacterr )
-+ {
-+ hcchar_data_t hcchar;
-+ hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar);
-+ _urbd->error_count=hcchar.b.multicnt;
-+ if(_urbd->error_count>=3)
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->wait_for_sof = 0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
-+ }
-+ else
-+ {
-+ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
-+ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ return 1;
-+ }
-+ else if(hcint.b.stall )
-+ {
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
-+ return 1;
-+ }
-+ else if(hcint.b.bblerr )
-+ {
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
-+ return 1;
-+ }
-+ else if(hcint.b.frmovrun )
-+ {
-+ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
-+ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ else if(hcint.b.datatglerr )
-+ {
-+IFX_WARN( "%s() %d Warning INTR IN SPLIT1 DATATGLERR\n",__func__,__LINE__);
-+showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
-+ return 1;
-+ }
-+ else if(hcint.b.xfercomp )
-+ {
-+IFX_WARN("%s() %d Warning INTR IN SPLIT1 COMPLETE\n",__func__,__LINE__);
-+showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
-+ }
-+ return 0;
-+}
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+static int32_t chhltd_intr_tx_ssplit(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ hcint_data_t hcint;
-+ hcint_data_t hcintmsk;
-+ hctsiz_data_t hctsiz;
-+ int out_nak_enh = 0;
-+
-+ if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
-+ out_nak_enh = 1;
-+
-+ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
-+ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
-+ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-+
-+ disable_hc_int(_hc_regs,ack);
-+ disable_hc_int(_hc_regs,nak);
-+ disable_hc_int(_hc_regs,nyet);
-+
-+ if (hcint.b.ack )
-+ {
-+ /*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/
-+ _ifxhc->nyet_count=0;
-+
-+ _urbd->error_count=0;
-+ _ifxhc->ssplit_out_xfer_count = _ifxhc->xfer_len;
-+ _ifxhc->split=2;
-+ _ifxhc->wait_for_sof = 0;
-+ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ else if(hcint.b.nyet)
-+ {
-+IFX_WARN("%s() %d Warning INTR OUT SPLIT1 NYET\n",__func__,__LINE__);
-+showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
-+ _urbd->error_count=0;
-+ _ifxhc->ssplit_out_xfer_count = _ifxhc->xfer_len;
-+ _ifxhc->split=2;
-+ _ifxhc->wait_for_sof = 0;
-+ _ifxhc->data_pid_start = read_data_toggle(_hc_regs);
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ else if(hcint.b.nak )
-+ {
-+ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
-+ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
-+ _urbd->error_count =0;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ else if(hcint.b.frmovrun )
-+ {
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
-+ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ else if(hcint.b.xacterr )
-+ {
-+ hcchar_data_t hcchar;
-+ hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar);
-+ _urbd->error_count=hcchar.b.multicnt;
-+ if(_urbd->error_count>=3)
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->wait_for_sof =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
-+ }
-+ else
-+ {
-+ enable_hc_int(_hc_regs,ack);
-+ enable_hc_int(_hc_regs,nak);
-+ enable_hc_int(_hc_regs,nyet);
-+ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
-+ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ return 1;
-+ }
-+ else if(hcint.b.datatglerr )
-+ {
-+IFX_WARN("%s() %d Warning INTR IN SPLIT1 DATATGLERR\n",__func__,__LINE__);
-+showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_DATA_TOGGLE_ERR);
-+ return 1;
-+ }
-+ else if(hcint.b.bblerr )
-+ {
-+IFX_WARN("%s() %d Warning INTR IN SPLIT1 BABBLEERR\n",__func__,__LINE__);
-+showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
-+ return 1;
-+ }
-+ else if(hcint.b.stall )
-+ {
-+IFX_WARN("%s() %d Warning INTR IN SPLIT1 STALL\n",__func__,__LINE__);
-+showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof =0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
-+ return 1;
-+ }
-+ else if(hcint.b.xfercomp )
-+ {
-+IFX_WARN("%s() %d Warning INTR IN SPLIT1 COMPLETE\n",__func__,__LINE__);
-+showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
-+ }
-+ return 0;
-+}
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+static int32_t chhltd_isoc_rx_ssplit(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ #if defined(__EN_ISOC__) && defined(__EN_ISOC_SPLIT__)
-+ hcint_data_t hcint;
-+ hcint_data_t hcintmsk;
-+ hctsiz_data_t hctsiz;
-+
-+ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
-+ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
-+ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-+ if (hcint.b.ack )
-+ {
-+ Do Complete Split
-+ }
-+ else if(hcint.b.frmovrun )
-+ {
-+ Rewind Buffer Pointers
-+ Retry Start Split (in next b_interval ¡V 1 uF)
-+ }
-+ else if(hcint.b.datatglerr )
-+ {
-+ warning
-+ }
-+ else if(hcint.b.bblerr )
-+ {
-+ warning
-+ }
-+ else if(hcint.b.xacterr )
-+ {
-+ warning
-+ }
-+ else if(hcint.b.stall )
-+ {
-+ warning
-+ }
-+ else if(hcint.b.nak )
-+ {
-+ warning
-+ }
-+ else if(hcint.b.xfercomp )
-+ {
-+ warning
-+ }
-+ else if(hcint.b.nyet)
-+ {
-+ warning
-+ }
-+ #endif
-+ return 0;
-+}
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+static int32_t chhltd_isoc_tx_ssplit(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ #if defined(__EN_ISOC__) && defined(__EN_ISOC_SPLIT__)
-+ hcint_data_t hcint;
-+ hcint_data_t hcintmsk;
-+ hctsiz_data_t hctsiz;
-+ int out_nak_enh = 0;
-+
-+ if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
-+ out_nak_enh = 1;
-+
-+ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
-+ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
-+ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-+ if (hcint.b.ack )
-+ {
-+ Do Next Start Split (in next b_interval ¡V 1 uF)
-+ }
-+ else if(hcint.b.frmovrun )
-+ {
-+ Do Next Transaction in next frame.
-+ }
-+ else if(hcint.b.datatglerr )
-+ {
-+ warning
-+ }
-+ else if(hcint.b.bblerr )
-+ {
-+ warning
-+ }
-+ else if(hcint.b.xacterr )
-+ {
-+ warning
-+ }
-+ else if(hcint.b.stall )
-+ {
-+ warning
-+ }
-+ else if(hcint.b.nak )
-+ {
-+ warning
-+ }
-+ else if(hcint.b.xfercomp )
-+ {
-+ warning
-+ }
-+ else if(hcint.b.nyet)
-+ {
-+ warning
-+ }
-+ #endif
-+ return 0;
-+}
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+static int32_t chhltd_ctrlbulk_rx_csplit(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ hcint_data_t hcint;
-+ hcint_data_t hcintmsk;
-+ hctsiz_data_t hctsiz;
-+
-+ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
-+ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
-+ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-+ disable_hc_int(_hc_regs,ack);
-+ disable_hc_int(_hc_regs,nak);
-+ disable_hc_int(_hc_regs,nyet);
-+
-+ _ifxhc->do_ping = 0;
-+
-+ if (hcint.b.xfercomp)
-+ {
-+ _urbd->error_count =0;
-+ _ifxhc->wait_for_sof = 0;
-+ _ifxhc->split=1;
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ return 1;
-+ }
-+ else if (hcint.b.nak)
-+ {
-+ _urbd->error_count=0;
-+
-+ _ifxhc->split = 1;
-+ _ifxhc->wait_for_sof = 1;
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ else if(hcint.b.nyet)
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
-+ _ifxhc->wait_for_sof = 1;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ else if(hcint.b.stall || hcint.b.bblerr )
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->wait_for_sof = 0;
-+ if (hcint.b.stall)
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
-+ else if(hcint.b.bblerr )
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
-+ return 1;
-+ }
-+ else if(hcint.b.xacterr )
-+ {
-+ _urbd->error_count++;
-+ if(_urbd->error_count>=3)
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->wait_for_sof = 0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
-+ }
-+ else
-+ {
-+ _ifxhc->split=1;
-+ _ifxhc->wait_for_sof = 1;
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ return 1;
-+ }
-+ else if(hcint.b.datatglerr )
-+ {
-+ if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0)
-+ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
-+ else
-+ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
-+ _ifxhc->split=1;
-+ _ifxhc->wait_for_sof = 1;
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ else if(hcint.b.frmovrun )
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->wait_for_sof = 0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
-+ return 1;
-+ }
-+ return 0;
-+}
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+static int32_t chhltd_ctrlbulk_tx_csplit(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ hcint_data_t hcint;
-+ hcint_data_t hcintmsk;
-+ hctsiz_data_t hctsiz;
-+ int out_nak_enh = 0;
-+
-+#if 1
-+static int first=0;
-+#endif
-+
-+ if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
-+ out_nak_enh = 1;
-+
-+ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
-+ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
-+ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-+ disable_hc_int(_hc_regs,ack);
-+ disable_hc_int(_hc_regs,nak);
-+ disable_hc_int(_hc_regs,nyet);
-+
-+#if 1
-+ if(!first&& _ifxhc->ep_type == IFXUSB_EP_TYPE_BULK
-+ &&(hcint.b.stall || hcint.b.datatglerr || hcint.b.frmovrun || hcint.b.bblerr || hcint.b.xacterr) && !hcint.b.ack)
-+ {
-+ showint( hcint.d32,hcintmsk.d32,hctsiz.d32);
-+ first=1;
-+ printk(KERN_INFO " [%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X] \n"
-+ ,*(_ifxhc->xfer_buff+ 0),*(_ifxhc->xfer_buff+ 1),*(_ifxhc->xfer_buff+ 2),*(_ifxhc->xfer_buff+ 3)
-+ ,*(_ifxhc->xfer_buff+ 4),*(_ifxhc->xfer_buff+ 5),*(_ifxhc->xfer_buff+ 6),*(_ifxhc->xfer_buff+ 7)
-+ ,*(_ifxhc->xfer_buff+ 8),*(_ifxhc->xfer_buff+ 9),*(_ifxhc->xfer_buff+10),*(_ifxhc->xfer_buff+11)
-+ ,*(_ifxhc->xfer_buff+12),*(_ifxhc->xfer_buff+13),*(_ifxhc->xfer_buff+14),*(_ifxhc->xfer_buff+15));
-+
-+ printk(KERN_INFO " [_urbd->urb->actual_length:%08X _ifxhc->start_pkt_count:%08X hctsiz.b.pktcnt:%08X ,_urbd->xfer_len:%08x] \n"
-+ ,_urbd->urb->actual_length
-+ ,_ifxhc->start_pkt_count
-+ ,hctsiz.b.pktcnt
-+ ,_urbd->xfer_len);
-+ }
-+#endif
-+
-+ if(hcint.b.xfercomp )
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->split=1;
-+ _ifxhc->do_ping= 0;
-+ #if 0
-+ if(_ifxhc->xfer_len==0 && !hcint.b.ack && (hcint.b.nak || hcint.b.nyet))
-+ {
-+ // Walkaround: When sending ZLP and receive NYEY or NAK but also issue CMPT intr
-+ // Solution: NoSplit: Resend at next SOF
-+ // Split : Resend at next SOF with SSPLIT
-+ _ifxhc->xfer_len = 0;
-+ _ifxhc->xfer_count = 0;
-+ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
-+ _ifxhc->wait_for_sof = 1;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ else
-+ #endif
-+ {
-+ _ifxhc->wait_for_sof = 0;
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ }
-+ return 1;
-+ }
-+ else if(hcint.b.nak )
-+ {
-+ _urbd->error_count=0;
-+
-+ _ifxhc->split = 1;
-+ _ifxhc->wait_for_sof = 1;
-+ if(!out_nak_enh )
-+ _ifxhc->do_ping =1;
-+ else
-+ _ifxhc->do_ping =0;
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ else if(hcint.b.nyet)
-+ {
-+ //Retry Complete Split
-+ // Issue Retry instantly on next SOF, without gothrough process_channels
-+ _urbd->error_count=0;
-+ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
-+ _ifxhc->wait_for_sof = 1;
-+ _ifxhc->do_ping = 0;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ else if(hcint.b.stall )
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->wait_for_sof = 0;
-+ _ifxhc->do_ping = 0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
-+ return 1;
-+ }
-+ else if(hcint.b.xacterr )
-+ {
-+ _urbd->error_count++;
-+ if(_urbd->error_count>=3)
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->wait_for_sof = 0;
-+ _ifxhc->do_ping = 0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
-+ }
-+ else
-+ {
-+ _ifxhc->split=1;
-+ _ifxhc->wait_for_sof = 1;
-+ if(!out_nak_enh )
-+ _ifxhc->do_ping =1;
-+ else
-+ _ifxhc->do_ping =0;
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ return 1;
-+ }
-+ else if(hcint.b.datatglerr )
-+ {
-+ if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0)
-+ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
-+ else
-+ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
-+ _ifxhc->split=1;
-+ _ifxhc->wait_for_sof = 1;
-+ if(!out_nak_enh )
-+ _ifxhc->do_ping =1;
-+ else
-+ _ifxhc->do_ping =0;
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ else if(hcint.b.frmovrun )
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->wait_for_sof = 0;
-+ _ifxhc->do_ping = 0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
-+ return 1;
-+ }
-+ else if(hcint.b.bblerr )
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->wait_for_sof = 0;
-+ _ifxhc->do_ping = 0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
-+ return 1;
-+ }
-+ return 0;
-+}
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+static int32_t chhltd_intr_rx_csplit(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ hcint_data_t hcint;
-+ hcint_data_t hcintmsk;
-+ hctsiz_data_t hctsiz;
-+
-+ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
-+ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
-+ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-+ disable_hc_int(_hc_regs,ack);
-+ disable_hc_int(_hc_regs,nak);
-+ disable_hc_int(_hc_regs,nyet);
-+ _ifxhc->do_ping = 0;
-+
-+ if (hcint.b.xfercomp )
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->wait_for_sof = 0;
-+ _ifxhc->split=1;
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ return 1;
-+ }
-+ else if(hcint.b.nak )
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->split = 1;
-+ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
-+ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ else if(hcint.b.nyet)
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
-+ _ifxhc->wait_for_sof = 0;
-+
-+ /*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/
-+ _ifxhc->nyet_count++;
-+ if(_ifxhc->nyet_count > 2) {
-+ _ifxhc->split = 1;
-+ _ifxhc->nyet_count = 0;
-+ _ifxhc->wait_for_sof = 5;
-+ }
-+
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ else if(hcint.b.frmovrun || hcint.b.bblerr || hcint.b.stall )
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->wait_for_sof = 0;
-+ if (hcint.b.stall)
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
-+ else if(hcint.b.bblerr )
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
-+ else if(hcint.b.frmovrun )
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
-+ return 1;
-+ }
-+ else if(hcint.b.xacterr )
-+ {
-+ hcchar_data_t hcchar;
-+ hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar);
-+ _urbd->error_count=hcchar.b.multicnt;
-+ if(_urbd->error_count>=3)
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->wait_for_sof = 0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
-+ }
-+ else
-+ {
-+ _ifxhc->split=1;
-+ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
-+ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ return 1;
-+ }
-+ else if(hcint.b.datatglerr )
-+ {
-+ if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0)
-+ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
-+ else
-+ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
-+ _ifxhc->split=1;
-+ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
-+ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ return 0;
-+}
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+static int32_t chhltd_intr_tx_csplit(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ hcint_data_t hcint;
-+ hcint_data_t hcintmsk;
-+ hctsiz_data_t hctsiz;
-+ int out_nak_enh = 0;
-+
-+ if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
-+ out_nak_enh = 1;
-+
-+ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
-+ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
-+ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-+ disable_hc_int(_hc_regs,ack);
-+ disable_hc_int(_hc_regs,nak);
-+ disable_hc_int(_hc_regs,nyet);
-+
-+ if(hcint.b.xfercomp )
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->wait_for_sof = 0;
-+ _ifxhc->split=1;
-+ _ifxhc->do_ping = 0;
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ return 1;
-+ }
-+ else if(hcint.b.nak )
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->split = 1;
-+ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
-+ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
-+ if(!out_nak_enh )
-+ _ifxhc->do_ping =1;
-+ else
-+ _ifxhc->do_ping =0;
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ else if(hcint.b.nyet)
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
-+ _ifxhc->wait_for_sof = 0;
-+ _ifxhc->do_ping = 0;
-+
-+ /*== AVM/BC 20100701 - Workaround FullSpeed Interrupts with HiSpeed Hub ==*/
-+ _ifxhc->nyet_count++;
-+ if(_ifxhc->nyet_count > 2) {
-+ _ifxhc->split = 1;
-+ _ifxhc->nyet_count = 0;
-+ _ifxhc->wait_for_sof = 5;
-+ }
-+
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ else if(hcint.b.stall || hcint.b.frmovrun)
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->wait_for_sof = 0;
-+ _ifxhc->do_ping = 0;
-+ if (hcint.b.stall)
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
-+ else if(hcint.b.frmovrun )
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_FRAME_OVERRUN);
-+ return 1;
-+ }
-+ else if(hcint.b.xacterr )
-+ {
-+ hcchar_data_t hcchar;
-+ hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar);
-+ _urbd->error_count=hcchar.b.multicnt;
-+ if(_urbd->error_count>=3)
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->wait_for_sof = 0;
-+ _ifxhc->do_ping = 0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_XACT_ERR);
-+ }
-+ else
-+ {
-+ _ifxhc->split=1;
-+ _ifxhc->wait_for_sof = _ifxhc->epqh->interval-1;
-+ if(!_ifxhc->wait_for_sof) _ifxhc->wait_for_sof=1;
-+ if(!out_nak_enh )
-+ _ifxhc->do_ping =1;
-+ else
-+ _ifxhc->do_ping =0;
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ }
-+ return 1;
-+ }
-+ else if(hcint.b.datatglerr )
-+ {
-+ if(_ifxhc->data_pid_start == IFXUSB_HC_PID_DATA0)
-+ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA1;
-+ else
-+ _ifxhc->data_pid_start = IFXUSB_HC_PID_DATA0;
-+ _ifxhc->split=1;
-+ if(!out_nak_enh )
-+ _ifxhc->do_ping =1;
-+ else
-+ _ifxhc->do_ping =0;
-+ _ifxhc->xfer_len = _urbd->xfer_len - _urbd->urb->actual_length;
-+ _ifxhc->xfer_count = _urbd->urb->actual_length;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ else if(hcint.b.bblerr )
-+ {
-+ _urbd->error_count=0;
-+ _ifxhc->wait_for_sof = 0;
-+ _ifxhc->do_ping = 0;
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_BABBLE_ERR);
-+ return 1;
-+ }
-+ return 0;
-+}
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+static int32_t chhltd_isoc_rx_csplit(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ #if defined(__EN_ISOC__) && defined(__EN_ISOC_SPLIT__)
-+ hcint_data_t hcint;
-+ hcint_data_t hcintmsk;
-+ hctsiz_data_t hctsiz;
-+
-+ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
-+ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
-+ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-+ if(hcint.b.xfercomp )
-+ {
-+ disable_hc_int(_hc_regs,ack);
-+ disable_hc_int(_hc_regs,nak);
-+ disable_hc_int(_hc_regs,nyet);
-+ _urbd->error_count=0;
-+ _ifxhc->wait_for_sof = 0;
-+ _ifxhc->split=1;
-+ complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ return 1;
-+ }
-+ else if(hcint.b.nak )
-+ {
-+ Retry Start Split (in next b_interval ¡V 1 uF)
-+ }
-+ else if(hcint.b.nyet)
-+ {
-+ //Do Next Complete Split
-+ // Issue Retry instantly on next SOF, without gothrough process_channels
-+ _urbd->error_count=0;
-+ //disable_hc_int(_hc_regs,ack);
-+ //disable_hc_int(_hc_regs,nak);
-+ //disable_hc_int(_hc_regs,datatglerr);
-+ _ifxhc->halt_status = HC_XFER_NO_HALT_STATUS;
-+ _ifxhc->wait_for_sof = 1;
-+ ifxhcd_hc_start(&_ifxhcd->core_if, _ifxhc);
-+ return 1;
-+ }
-+ else if(hcint.b.frmovrun || hcint.b.stall || hcint.b.bblerr)
-+ {
-+ _urbd->error_count=0;
-+ disable_hc_int(_hc_regs,ack);
-+ disable_hc_int(_hc_regs,nyet);
-+ disable_hc_int(_hc_regs,nak);
-+ _ifxhc->wait_for_sof = 0;
-+
-+ //if(hctsiz.b.pktcnt==0)
-+ //{
-+ // complete_channel(_ifxhcd, _ifxhc, _urbd);
-+ // return 1;
-+ //}
-+ //else
-+ // _urbd->urb->actual_length += (_ifxhc->xfer_len - hctsiz.b.xfersize);
-+ if (hcint.b.stall)
-+ release_channel(_ifxhcd, _ifxhc, HC_XFER_STALL);
-+ else if(hcint.b.frmovrun )
-+ else if(hcint.b.bblerr )
-+ return 1;
-+ }
-+ else if(hcint.b.xacterr )
-+ {
-+ Rewind Buffer Pointers
-+ if (HCCHARn.EC = = 3) // ERR response received
-+ {
-+ Record ERR error
-+ Do Next Start Split (in next frame)
-+ }
-+ else
-+ {
-+ De-allocate Channel
-+ }
-+ }
-+ else if(hcint.b.datatglerr )
-+ {
-+ warning
-+ }
-+ else if(hcint.b.ack )
-+ {
-+ warning
-+ }
-+ #endif
-+ return 0;
-+}
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+static int32_t chhltd_isoc_tx_csplit(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ #if defined(__EN_ISOC__) && defined(__EN_ISOC_SPLIT__)
-+ hcint_data_t hcint;
-+ hcint_data_t hcintmsk;
-+ hctsiz_data_t hctsiz;
-+ int out_nak_enh = 0;
-+
-+ if (_ifxhcd->core_if.snpsid >= 0x4f54271a && _ifxhc->speed == IFXUSB_EP_SPEED_HIGH)
-+ out_nak_enh = 1;
-+
-+ hcint.d32 = ifxusb_rreg(&_hc_regs->hcint);
-+ hcintmsk.d32 = ifxusb_rreg(&_hc_regs->hcintmsk);
-+ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-+ warning
-+ #endif
-+ return 0;
-+}
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+static int32_t handle_hc_chhltd_intr(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ IFX_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: Channel Halted--\n", _ifxhc->hc_num);
-+
-+ _ifxhc->halting = 0;
-+ _ifxhc->xfer_started = 0;
-+
-+ if (_ifxhc->halt_status == HC_XFER_URB_DEQUEUE ||
-+ _ifxhc->halt_status == HC_XFER_AHB_ERR) {
-+ /*
-+ * Just release the channel. A dequeue can happen on a
-+ * transfer timeout. In the case of an AHB Error, the channel
-+ * was forced to halt because there's no way to gracefully
-+ * recover.
-+ */
-+ release_channel(_ifxhcd, _ifxhc, _ifxhc->halt_status);
-+ return 1;
-+ }
-+
-+ if (_ifxhc->ep_type == IFXUSB_EP_TYPE_CTRL || _ifxhc->ep_type == IFXUSB_EP_TYPE_BULK)
-+ {
-+ if (_ifxhc->split==0)
-+ {
-+ if(_ifxhc->is_in)
-+ return (chhltd_ctrlbulk_rx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
-+ else
-+ return (chhltd_ctrlbulk_tx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
-+ }
-+ else if(_ifxhc->split==1)
-+ {
-+ if(_ifxhc->is_in)
-+ return (chhltd_ctrlbulk_rx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
-+ else
-+ return (chhltd_ctrlbulk_tx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
-+ }
-+ else if(_ifxhc->split==2)
-+ {
-+ if(_ifxhc->is_in)
-+ return (chhltd_ctrlbulk_rx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
-+ else
-+ return (chhltd_ctrlbulk_tx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
-+ }
-+ }
-+ else if(_ifxhc->ep_type == IFXUSB_EP_TYPE_INTR)
-+ {
-+ if (_ifxhc->split==0)
-+ {
-+ if(_ifxhc->is_in)
-+ return (chhltd_intr_rx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
-+ else
-+ return (chhltd_intr_tx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
-+ }
-+ else if(_ifxhc->split==1)
-+ {
-+ if(_ifxhc->is_in)
-+ return (chhltd_intr_rx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
-+ else
-+ return (chhltd_intr_tx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
-+ }
-+ else if(_ifxhc->split==2)
-+ {
-+ if(_ifxhc->is_in)
-+ return (chhltd_intr_rx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
-+ else
-+ return (chhltd_intr_tx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
-+ }
-+ }
-+ else if(_ifxhc->ep_type == IFXUSB_EP_TYPE_ISOC)
-+ {
-+ if (_ifxhc->split==0)
-+ {
-+ if(_ifxhc->is_in)
-+ return (chhltd_isoc_rx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
-+ else
-+ return (chhltd_isoc_tx_nonsplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
-+ }
-+ else if(_ifxhc->split==1)
-+ {
-+ if(_ifxhc->is_in)
-+ return (chhltd_isoc_rx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
-+ else
-+ return (chhltd_isoc_tx_ssplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
-+ }
-+ else if(_ifxhc->split==2)
-+ {
-+ if(_ifxhc->is_in)
-+ return (chhltd_isoc_rx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
-+ else
-+ return (chhltd_isoc_tx_csplit(_ifxhcd,_ifxhc,_hc_regs,_urbd));
-+ }
-+ }
-+ return 0;
-+}
-+
-+/*
-+ * Handles a host channel AHB error interrupt. This handler is only called in
-+ * DMA mode.
-+ */
-+static void hc_other_intr_dump(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ #ifdef __DEBUG__
-+ hcchar_data_t hcchar;
-+ hcsplt_data_t hcsplt;
-+ hctsiz_data_t hctsiz;
-+ uint32_t hcdma;
-+ struct urb *urb = _urbd->urb;
-+ hcchar.d32 = ifxusb_rreg(&_hc_regs->hcchar);
-+ hcsplt.d32 = ifxusb_rreg(&_hc_regs->hcsplt);
-+ hctsiz.d32 = ifxusb_rreg(&_hc_regs->hctsiz);
-+ hcdma = ifxusb_rreg(&_hc_regs->hcdma);
-+
-+ IFX_ERROR("Channel %d\n", _ifxhc->hc_num);
-+ IFX_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
-+ IFX_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
-+ IFX_ERROR(" Device address: %d\n", usb_pipedevice(urb->pipe));
-+ IFX_ERROR(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
-+ (usb_pipein(urb->pipe) ? "IN" : "OUT"));
-+ IFX_ERROR(" Endpoint type: %s\n",
-+ ({char *pipetype;
-+ switch (usb_pipetype(urb->pipe)) {
-+ case PIPE_CONTROL: pipetype = "CTRL"; break;
-+ case PIPE_BULK: pipetype = "BULK"; break;
-+ case PIPE_INTERRUPT: pipetype = "INTR"; break;
-+ case PIPE_ISOCHRONOUS: pipetype = "ISOC"; break;
-+ default: pipetype = "????"; break;
-+ }; pipetype;}));
-+ IFX_ERROR(" Speed: %s\n",
-+ ({char *speed;
-+ switch (urb->dev->speed) {
-+ case USB_SPEED_HIGH: speed = "HS"; break;
-+ case USB_SPEED_FULL: speed = "FS"; break;
-+ case USB_SPEED_LOW: speed = "LS"; break;
-+ default: speed = "????"; break;
-+ }; speed;}));
-+ IFX_ERROR(" Max packet size: %d\n",
-+ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
-+ IFX_ERROR(" Data buffer length: %d\n", urb->transfer_buffer_length);
-+ IFX_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n",
-+ urb->transfer_buffer, (void *)urb->transfer_dma);
-+ IFX_ERROR(" Setup buffer: %p, Setup DMA: %p\n",
-+ urb->setup_packet, (void *)urb->setup_dma);
-+ IFX_ERROR(" Interval: %d\n", urb->interval);
-+ #endif //__DEBUG__
-+}
-+
-+/*
-+ * Handles a host channel ACK interrupt. This interrupt is enabled when
-+ * errors occur, and during Start Split transactions.
-+ */
-+static int32_t handle_hc_ack_intr(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ _urbd->error_count=0;
-+ if(_ifxhc->nak_countdown_r)
-+ {
-+ _ifxhc->nak_retry=_ifxhc->nak_retry_r;
-+ _ifxhc->nak_countdown=_ifxhc->nak_countdown_r;
-+ }
-+ else
-+ disable_hc_int(_hc_regs,nak);
-+ disable_hc_int(_hc_regs,ack);
-+ return 1;
-+}
-+
-+/*
-+ * Handles a host channel ACK interrupt. This interrupt is enabled when
-+ * errors occur, and during Start Split transactions.
-+ */
-+static int32_t handle_hc_nak_intr(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+
-+ _urbd->error_count=0;
-+
-+ if(_ifxhc->nak_countdown_r)
-+ {
-+ _ifxhc->nak_countdown--;
-+ if(!_ifxhc->nak_countdown)
-+ {
-+ _ifxhc->nak_countdown=_ifxhc->nak_countdown_r;
-+ disable_hc_int(_hc_regs,ack);
-+ disable_hc_int(_hc_regs,nak);
-+ ifxhcd_hc_halt(&_ifxhcd->core_if, _ifxhc, HC_XFER_NAK);
-+ }
-+ else
-+ enable_hc_int(_hc_regs,ack);
-+ }
-+ else
-+ {
-+ disable_hc_int(_hc_regs,ack);
-+ disable_hc_int(_hc_regs,nak);
-+ }
-+ return 1;
-+}
-+
-+/*
-+ * Handles a host channel AHB error interrupt. This handler is only called in
-+ * DMA mode.
-+ */
-+static int32_t handle_hc_ahberr_intr(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ IFX_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "AHB Error--\n", _ifxhc->hc_num);
-+ hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
-+
-+ ifxhcd_hc_halt(&_ifxhcd->core_if, _ifxhc, HC_XFER_AHB_ERR);
-+ return 1;
-+}
-+
-+/*
-+ * Datatoggle
-+ */
-+static int32_t handle_hc_datatglerr_intr(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ IFX_ERROR( "--Host Channel %d Interrupt: "
-+ "DATATOGGLE Error--\n", _ifxhc->hc_num);
-+ hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
-+ disable_hc_int(_hc_regs,datatglerr);
-+ return 1;
-+}
-+
-+
-+
-+/*
-+ * Interrupts which should not been triggered
-+ */
-+static int32_t handle_hc_frmovrun_intr(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ IFX_ERROR( "--Host Channel %d Interrupt: "
-+ "FrameOverRun Error--\n", _ifxhc->hc_num);
-+ hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
-+ disable_hc_int(_hc_regs,frmovrun);
-+ return 1;
-+}
-+
-+static int32_t handle_hc_bblerr_intr(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ IFX_ERROR( "--Host Channel %d Interrupt: "
-+ "BBL Error--\n", _ifxhc->hc_num);
-+ hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
-+ disable_hc_int(_hc_regs,bblerr);
-+ return 1;
-+}
-+
-+static int32_t handle_hc_xacterr_intr(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ IFX_ERROR( "--Host Channel %d Interrupt: "
-+ "XACT Error--\n", _ifxhc->hc_num);
-+ hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
-+ disable_hc_int(_hc_regs,xacterr);
-+ return 1;
-+}
-+
-+static int32_t handle_hc_nyet_intr(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ IFX_ERROR( "--Host Channel %d Interrupt: "
-+ "NYET--\n", _ifxhc->hc_num);
-+ hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
-+ _urbd->error_count=0;
-+ disable_hc_int(_hc_regs,nyet);
-+ return 1;
-+}
-+
-+static int32_t handle_hc_stall_intr(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ IFX_ERROR( "--Host Channel %d Interrupt: "
-+ "STALL--\n", _ifxhc->hc_num);
-+ hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
-+ disable_hc_int(_hc_regs,stall);
-+ return 1;
-+}
-+
-+static int32_t handle_hc_xfercomp_intr(ifxhcd_hcd_t *_ifxhcd,
-+ ifxhcd_hc_t *_ifxhc,
-+ ifxusb_hc_regs_t *_hc_regs,
-+ ifxhcd_urbd_t *_urbd)
-+{
-+ IFX_ERROR( "--Host Channel %d Interrupt: "
-+ "XFERCOMP--\n", _ifxhc->hc_num);
-+ hc_other_intr_dump(_ifxhcd,_ifxhc,_hc_regs,_urbd);
-+ disable_hc_int(_hc_regs,xfercomp);
-+ return 1;
-+}
-+
-+
-+
-+/* This interrupt indicates that the specified host channels has a pending
-+ * interrupt. There are multiple conditions that can cause each host channel
-+ * interrupt. This function determines which conditions have occurred for this
-+ * host channel interrupt and handles them appropriately. */
-+static int32_t handle_hc_n_intr (ifxhcd_hcd_t *_ifxhcd, uint32_t _num)
-+{
-+ uint32_t hcintval,hcintmsk;
-+ hcint_data_t hcint;
-+ ifxhcd_hc_t *ifxhc;
-+ ifxusb_hc_regs_t *hc_regs;
-+ ifxhcd_urbd_t *urbd;
-+ unsigned long flags;
-+
-+ int retval = 0;
-+
-+ IFX_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", _num);
-+
-+ /*== AVM/BC 20101111 Lock needed ==*/
-+ SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
-+
-+ ifxhc = &_ifxhcd->ifxhc[_num];
-+ hc_regs = _ifxhcd->core_if.hc_regs[_num];
-+
-+ hcintval = ifxusb_rreg(&hc_regs->hcint);
-+ hcintmsk = ifxusb_rreg(&hc_regs->hcintmsk);
-+ hcint.d32 = hcintval & hcintmsk;
-+ IFX_DEBUGPL(DBG_HCDV, " 0x%08x & 0x%08x = 0x%08x\n",
-+ hcintval, hcintmsk, hcint.d32);
-+
-+ urbd = list_entry(ifxhc->epqh->urbd_list.next, ifxhcd_urbd_t, urbd_list_entry);
-+
-+ if (hcint.b.datatglerr)
-+ retval |= handle_hc_datatglerr_intr(_ifxhcd, ifxhc, hc_regs, urbd);
-+ if (hcint.b.frmovrun)
-+ retval |= handle_hc_frmovrun_intr(_ifxhcd, ifxhc, hc_regs, urbd);
-+ if (hcint.b.bblerr)
-+ retval |= handle_hc_bblerr_intr(_ifxhcd, ifxhc, hc_regs, urbd);
-+ if (hcint.b.xacterr)
-+ retval |= handle_hc_xacterr_intr(_ifxhcd, ifxhc, hc_regs, urbd);
-+ if (hcint.b.nyet)
-+ retval |= handle_hc_nyet_intr(_ifxhcd, ifxhc, hc_regs, urbd);
-+ if (hcint.b.ack)
-+ retval |= handle_hc_ack_intr(_ifxhcd, ifxhc, hc_regs, urbd);
-+ if (hcint.b.nak)
-+ retval |= handle_hc_nak_intr(_ifxhcd, ifxhc, hc_regs, urbd);
-+ if (hcint.b.stall)
-+ retval |= handle_hc_stall_intr(_ifxhcd, ifxhc, hc_regs, urbd);
-+ if (hcint.b.ahberr) {
-+ clear_hc_int(hc_regs, ahberr);
-+ retval |= handle_hc_ahberr_intr(_ifxhcd, ifxhc, hc_regs, urbd);
-+ }
-+ if (hcint.b.chhltd) {
-+ /* == 20110901 AVM/WK Fix: Flag must not be cleared after restart of channel ==*/
-+ clear_hc_int(hc_regs, chhltd);
-+ retval |= handle_hc_chhltd_intr(_ifxhcd, ifxhc, hc_regs, urbd);
-+ }
-+ if (hcint.b.xfercomp)
-+ retval |= handle_hc_xfercomp_intr(_ifxhcd, ifxhc, hc_regs, urbd);
-+
-+ /* == 20110901 AVM/WK Fix: Never clear possibly new intvals ==*/
-+ //ifxusb_wreg(&hc_regs->hcint,hcintval);
-+
-+ SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
-+
-+ return retval;
-+}
-+
-+
-+
-+
-+
-+
-+static uint8_t update_interval_counter(ifxhcd_epqh_t *_epqh,uint32_t _diff)
-+{
-+ if(_diff>=_epqh->period_counter)
-+ {
-+ _epqh->period_do=1;
-+ if(_diff>_epqh->interval)
-+ _epqh->period_counter=1;
-+ else
-+ _epqh->period_counter=_epqh->period_counter+_epqh->interval-_diff;
-+ return 1;
-+ }
-+ _epqh->period_counter=_epqh->period_counter-_diff;
-+ return 0;
-+}
-+
-+
-+
-+
-+/*
-+ * Handles the start-of-frame interrupt in host mode. Non-periodic
-+ * transactions may be queued to the DWC_otg controller for the current
-+ * (micro)frame. Periodic transactions may be queued to the controller for the
-+ * next (micro)frame.
-+ */
-+static int32_t handle_sof_intr (ifxhcd_hcd_t *_ifxhcd)
-+{
-+ #ifdef __DYN_SOF_INTR__
-+ uint8_t with_count_down=0;
-+ #endif
-+ uint8_t active_on=0;
-+ uint8_t ready_on=0;
-+ struct list_head *epqh_entry;
-+ ifxhcd_epqh_t *epqh;
-+ hfnum_data_t hfnum;
-+ uint32_t fndiff;
-+
-+ unsigned long flags;
-+#ifdef __USE_TIMER_4_SOF__
-+ uint32_t wait_for_sof = 0x10000;
-+#endif
-+
-+ SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
-+
-+ {
-+ int num_channels;
-+ ifxusb_hc_regs_t *hc_regs;
-+ int i;
-+ num_channels = _ifxhcd->core_if.params.host_channels;
-+
-+// AVM/WK moved block here due to use of SOF timer
-+ hfnum.d32 = ifxusb_rreg(&_ifxhcd->core_if.host_global_regs->hfnum);
-+ fndiff = hfnum.b.frnum;
-+ fndiff+= 0x00004000;
-+ fndiff-= _ifxhcd->lastframe ;
-+ fndiff&= 0x00003FFF;
-+ if(!fndiff) fndiff =1;
-+
-+ for (i = 0; i < num_channels; i++)
-+ {
-+ if(_ifxhcd->ifxhc[i].wait_for_sof && _ifxhcd->ifxhc[i].xfer_started)
-+ {
-+#ifdef __USE_TIMER_4_SOF__
-+ if (_ifxhcd->ifxhc[i].wait_for_sof > fndiff) {
-+ _ifxhcd->ifxhc[i].wait_for_sof -= fndiff;
-+ } else {
-+ _ifxhcd->ifxhc[i].wait_for_sof = 0;
-+ }
-+#else
-+ _ifxhcd->ifxhc[i].wait_for_sof--;
-+#endif
-+ if(_ifxhcd->ifxhc[i].wait_for_sof==0)
-+ {
-+ hcint_data_t hcint= { .d32=0 };
-+ hc_regs = _ifxhcd->core_if.hc_regs[i];
-+
-+ hcint.d32 =0xFFFFFFFF;
-+ ifxusb_wreg(&hc_regs->hcint, hcint.d32);
-+
-+ hcint.d32=ifxusb_rreg(&hc_regs->hcintmsk);
-+ hcint.b.nak =0;
-+ hcint.b.ack =0;
-+ /* == 20110901 AVM/WK Fix: We don't need NOT YET IRQ ==*/
-+ hcint.b.nyet=0;
-+ _ifxhcd->ifxhc[i].nak_countdown=_ifxhcd->ifxhc[i].nak_countdown_r;
-+ if(_ifxhcd->ifxhc[i].nak_countdown_r)
-+ hcint.b.nak =1;
-+ ifxusb_wreg(&hc_regs->hcintmsk, hcint.d32);
-+
-+ /* AVM WK / BC 20100827
-+ * FIX: Packet was ignored because of wrong Oddframe bit
-+ */
-+ if (_ifxhcd->ifxhc[i].ep_type == IFXUSB_EP_TYPE_INTR || _ifxhcd->ifxhc[i].ep_type == IFXUSB_EP_TYPE_ISOC)
-+ {
-+ hcchar_data_t hcchar;
-+ hcchar.d32 = _ifxhcd->ifxhc[i].hcchar;
-+ hfnum.d32 = ifxusb_rreg(&_ifxhcd->core_if.host_global_regs->hfnum);
-+ /* 1 if _next_ frame is odd, 0 if it's even */
-+ hcchar.b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
-+ _ifxhcd->ifxhc[i].hcchar = hcchar.d32;
-+ }
-+
-+ ifxusb_wreg(&hc_regs->hcchar, _ifxhcd->ifxhc[i].hcchar);
-+
-+ }
-+ }
-+ else
-+ _ifxhcd->ifxhc[i].wait_for_sof=0;
-+
-+#ifdef __USE_TIMER_4_SOF__
-+ if (_ifxhcd->ifxhc[i].wait_for_sof && (wait_for_sof > _ifxhcd->ifxhc[i].wait_for_sof)) {
-+ wait_for_sof = _ifxhcd->ifxhc[i].wait_for_sof;
-+ }
-+#endif
-+ }
-+ }
-+
-+ // ISOC Active
-+ #ifdef __EN_ISOC__
-+ #error ISOC not supported: missing SOF code
-+ epqh_entry = _ifxhcd->epqh_isoc_active.next;
-+ while (epqh_entry != &_ifxhcd->epqh_isoc_active)
-+ {
-+ epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry);
-+ epqh_entry = epqh_entry->next;
-+ #ifdef __DYN_SOF_INTR__
-+ with_count_down=1;
-+ #endif
-+ active_on+=update_interval_counter(epqh,fndiff);
-+ }
-+
-+ // ISOC Ready
-+ epqh_entry = _ifxhcd->epqh_isoc_ready.next;
-+ while (epqh_entry != &_ifxhcd->epqh_isoc_ready)
-+ {
-+ epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry);
-+ epqh_entry = epqh_entry->next;
-+ #ifdef __DYN_SOF_INTR__
-+ with_count_down=1;
-+ #endif
-+ ready_on+=update_interval_counter(epqh,fndiff);
-+ }
-+ #endif
-+
-+ // INTR Active
-+ epqh_entry = _ifxhcd->epqh_intr_active.next;
-+ while (epqh_entry != &_ifxhcd->epqh_intr_active)
-+ {
-+ epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry);
-+ epqh_entry = epqh_entry->next;
-+ #ifdef __DYN_SOF_INTR__
-+ with_count_down=1;
-+ #endif
-+#ifdef __USE_TIMER_4_SOF__
-+ if (update_interval_counter(epqh,fndiff)) {
-+ active_on ++;
-+ wait_for_sof = 1;
-+ } else {
-+ if (epqh->period_counter && (wait_for_sof > epqh->period_counter)) {
-+ wait_for_sof = epqh->period_counter;
-+ }
-+ }
-+#else
-+ active_on+=update_interval_counter(epqh,fndiff);
-+#endif
-+ }
-+
-+ // INTR Ready
-+ epqh_entry = _ifxhcd->epqh_intr_ready.next;
-+ while (epqh_entry != &_ifxhcd->epqh_intr_ready)
-+ {
-+ epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry);
-+ epqh_entry = epqh_entry->next;
-+ #ifdef __DYN_SOF_INTR__
-+ with_count_down=1;
-+ #endif
-+#ifdef __USE_TIMER_4_SOF__
-+ if (update_interval_counter(epqh,fndiff)) {
-+ ready_on ++;
-+ wait_for_sof = 1;
-+ } else {
-+ if (epqh->period_counter && (wait_for_sof > epqh->period_counter)) {
-+ wait_for_sof = epqh->period_counter;
-+ }
-+ }
-+#else
-+ ready_on+=update_interval_counter(epqh,fndiff);
-+#endif
-+ }
-+
-+ // Stdby
-+ epqh_entry = _ifxhcd->epqh_stdby.next;
-+ while (epqh_entry != &_ifxhcd->epqh_stdby)
-+ {
-+ epqh = list_entry(epqh_entry, ifxhcd_epqh_t, epqh_list_entry);
-+ epqh_entry = epqh_entry->next;
-+ if(epqh->period_counter > 0 ) {
-+#ifdef __USE_TIMER_4_SOF__
-+ if (epqh->period_counter > fndiff) {
-+ epqh->period_counter -= fndiff;
-+ } else {
-+ epqh->period_counter = 0;
-+ }
-+#else
-+ epqh->period_counter --;
-+#endif
-+ #ifdef __DYN_SOF_INTR__
-+ with_count_down=1;
-+ #endif
-+ }
-+ if(epqh->period_counter == 0) {
-+ ifxhcd_epqh_idle_periodic(epqh);
-+ }
-+#ifdef __USE_TIMER_4_SOF__
-+ else {
-+ if (wait_for_sof > epqh->period_counter) {
-+ wait_for_sof = epqh->period_counter;
-+ }
-+ }
-+#endif
-+ }
-+ SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
-+
-+ if(ready_on)
-+ select_eps(_ifxhcd);
-+ else if(active_on)
-+ process_channels(_ifxhcd);
-+
-+ /* Clear interrupt */
-+ {
-+ gint_data_t gintsts;
-+ gintsts.d32=0;
-+ gintsts.b.sofintr = 1;
-+ ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32);
-+
-+ #ifdef __DYN_SOF_INTR__
-+ if(!with_count_down)
-+ ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk, gintsts.d32,0);
-+ #endif
-+#ifdef __USE_TIMER_4_SOF__
-+ wait_for_sof &= 0xFFFF; // reduce to 16 Bits.
-+
-+ if(wait_for_sof == 1) {
-+ // enable SOF
-+ gint_data_t gintsts;
-+ gintsts.d32=0;
-+ gintsts.b.sofintr = 1;
-+ ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk, 0,gintsts.d32);
-+ } else {
-+ // disable SOF
-+ ifxusb_mreg(&_ifxhcd->core_if.core_global_regs->gintmsk, gintsts.d32,0);
-+ if (wait_for_sof > 1) {
-+ // use timer, not SOF IRQ
-+ hprt0_data_t hprt0;
-+ ktime_t ktime;
-+ hprt0.d32 = ifxusb_read_hprt0 (&_ifxhcd->core_if);
-+ if (hprt0.b.prtspd == IFXUSB_HPRT0_PRTSPD_HIGH_SPEED) {
-+ ktime = ktime_set(0, wait_for_sof * 125 * 1000); /*--- wakeup in n*125usec ---*/
-+ } else {
-+ ktime = ktime_set(0, wait_for_sof * (1000*1000)); /*--- wakeup in n*1000usec ---*/
-+ }
-+ hrtimer_start(&_ifxhcd->hr_timer, ktime, HRTIMER_MODE_REL);
-+ }
-+ }
-+#endif
-+ }
-+ _ifxhcd->lastframe=hfnum.b.frnum;
-+ return 1;
-+}
-+
-+
-+
-+/* There are multiple conditions that can cause a port interrupt. This function
-+ * determines which interrupt conditions have occurred and handles them
-+ * appropriately. */
-+static int32_t handle_port_intr (ifxhcd_hcd_t *_ifxhcd)
-+{
-+ int retval = 0;
-+ hprt0_data_t hprt0;
-+ hprt0_data_t hprt0_modify;
-+
-+ hprt0.d32 =
-+ hprt0_modify.d32 = ifxusb_rreg(_ifxhcd->core_if.hprt0);
-+
-+ /* Clear appropriate bits in HPRT0 to clear the interrupt bit in
-+ * GINTSTS */
-+
-+ hprt0_modify.b.prtena = 0;
-+ hprt0_modify.b.prtconndet = 0;
-+ hprt0_modify.b.prtenchng = 0;
-+ hprt0_modify.b.prtovrcurrchng = 0;
-+
-+ /* Port Connect Detected
-+ * Set flag and clear if detected */
-+ if (hprt0.b.prtconndet) {
-+ IFX_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x "
-+ "Port Connect Detected--\n", hprt0.d32);
-+ _ifxhcd->flags.b.port_connect_status_change = 1;
-+ _ifxhcd->flags.b.port_connect_status = 1;
-+ hprt0_modify.b.prtconndet = 1;
-+
-+ /* The Hub driver asserts a reset when it sees port connect
-+ * status change flag */
-+ retval |= 1;
-+ }
-+
-+ /* Port Enable Changed
-+ * Clear if detected - Set internal flag if disabled */
-+ if (hprt0.b.prtenchng) {
-+
-+ IFX_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x "
-+ "Port Enable Changed--\n", hprt0.d32);
-+ hprt0_modify.b.prtenchng = 1;
-+ if (hprt0.b.prtena == 1)
-+ /* Port has been enabled set the reset change flag */
-+ _ifxhcd->flags.b.port_reset_change = 1;
-+ else
-+ _ifxhcd->flags.b.port_enable_change = 1;
-+ retval |= 1;
-+ }
-+
-+ /* Overcurrent Change Interrupt */
-+
-+ if (hprt0.b.prtovrcurrchng) {
-+ IFX_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x "
-+ "Port Overcurrent Changed--\n", hprt0.d32);
-+ _ifxhcd->flags.b.port_over_current_change = 1;
-+ hprt0_modify.b.prtovrcurrchng = 1;
-+ retval |= 1;
-+ }
-+
-+ /* Clear Port Interrupts */
-+ ifxusb_wreg(_ifxhcd->core_if.hprt0, hprt0_modify.d32);
-+ return retval;
-+}
-+
-+/*
-+ * This interrupt indicates that SUSPEND state has been detected on
-+ * the USB.
-+ * No Functioning in Host Mode
-+ */
-+static int32_t handle_usb_suspend_intr(ifxhcd_hcd_t *_ifxhcd)
-+{
-+ gint_data_t gintsts;
-+ IFX_DEBUGP("USB SUSPEND RECEIVED!\n");
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.usbsuspend = 1;
-+ ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32);
-+ return 1;
-+}
-+
-+/*
-+ * This interrupt indicates that the IFXUSB controller has detected a
-+ * resume or remote wakeup sequence. If the IFXUSB controller is in
-+ * low power mode, the handler must brings the controller out of low
-+ * power mode. The controller automatically begins resume
-+ * signaling. The handler schedules a time to stop resume signaling.
-+ */
-+static int32_t handle_wakeup_detected_intr(ifxhcd_hcd_t *_ifxhcd)
-+{
-+ gint_data_t gintsts;
-+ hprt0_data_t hprt0 = {.d32=0};
-+ pcgcctl_data_t pcgcctl = {.d32=0};
-+ ifxusb_core_if_t *core_if = &_ifxhcd->core_if;
-+
-+ IFX_DEBUGPL(DBG_ANY, "++Resume and Remote Wakeup Detected Interrupt++\n");
-+
-+ /*
-+ * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
-+ * so that OPT tests pass with all PHYs).
-+ */
-+ /* Restart the Phy Clock */
-+ pcgcctl.b.stoppclk = 1;
-+ ifxusb_mreg(core_if->pcgcctl, pcgcctl.d32, 0);
-+ UDELAY(10);
-+
-+ /* Now wait for 70 ms. */
-+ hprt0.d32 = ifxusb_read_hprt0( core_if );
-+ IFX_DEBUGPL(DBG_ANY,"Resume: HPRT0=%0x\n", hprt0.d32);
-+ MDELAY(70);
-+ hprt0.b.prtres = 0; /* Resume */
-+ ifxusb_wreg(core_if->hprt0, hprt0.d32);
-+ IFX_DEBUGPL(DBG_ANY,"Clear Resume: HPRT0=%0x\n", ifxusb_rreg(core_if->hprt0));
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.wkupintr = 1;
-+ ifxusb_wreg(&core_if->core_global_regs->gintsts, gintsts.d32);
-+ return 1;
-+}
-+
-+/*
-+ * This interrupt indicates that a device is initiating the Session
-+ * Request Protocol to request the host to turn on bus power so a new
-+ * session can begin. The handler responds by turning on bus power. If
-+ * the DWC_otg controller is in low power mode, the handler brings the
-+ * controller out of low power mode before turning on bus power.
-+ */
-+static int32_t handle_session_req_intr(ifxhcd_hcd_t *_ifxhcd)
-+{
-+ /* Clear interrupt */
-+ gint_data_t gintsts = { .d32 = 0 };
-+ gintsts.b.sessreqintr = 1;
-+ ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32);
-+ return 1;
-+}
-+
-+/*
-+ * This interrupt indicates that a device has been disconnected from
-+ * the root port.
-+ */
-+static int32_t handle_disconnect_intr(ifxhcd_hcd_t *_ifxhcd)
-+{
-+ gint_data_t gintsts;
-+
-+ ifxhcd_disconnect(_ifxhcd);
-+
-+ gintsts.d32 = 0;
-+ gintsts.b.disconnect = 1;
-+ ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32);
-+ return 1;
-+}
-+
-+/*
-+ * This function handles the Connector ID Status Change Interrupt. It
-+ * reads the OTG Interrupt Register (GOTCTL) to determine whether this
-+ * is a Device to Host Mode transition or a Host Mode to Device
-+ * Transition.
-+ * This only occurs when the cable is connected/removed from the PHY
-+ * connector.
-+ */
-+static int32_t handle_conn_id_status_change_intr(ifxhcd_hcd_t *_ifxhcd)
-+{
-+ gint_data_t gintsts;
-+
-+ IFX_WARN("ID Status Change Interrupt: currently in %s mode\n",
-+ ifxusb_mode(&_ifxhcd->core_if) ? "Host" : "Device");
-+
-+ gintsts.d32 = 0;
-+ gintsts.b.conidstschng = 1;
-+ ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32);
-+ return 1;
-+}
-+
-+static int32_t handle_otg_intr(ifxhcd_hcd_t *_ifxhcd)
-+{
-+ ifxusb_core_global_regs_t *global_regs = _ifxhcd->core_if.core_global_regs;
-+ gotgint_data_t gotgint;
-+ gotgint.d32 = ifxusb_rreg( &global_regs->gotgint);
-+ /* Clear GOTGINT */
-+ ifxusb_wreg (&global_regs->gotgint, gotgint.d32);
-+ return 1;
-+}
-+
-+/** This function will log a debug message */
-+static int32_t handle_mode_mismatch_intr(ifxhcd_hcd_t *_ifxhcd)
-+{
-+ gint_data_t gintsts;
-+
-+ IFX_WARN("Mode Mismatch Interrupt: currently in %s mode\n",
-+ ifxusb_mode(&_ifxhcd->core_if) ? "Host" : "Device");
-+ gintsts.d32 = 0;
-+ gintsts.b.modemismatch = 1;
-+ ifxusb_wreg(&_ifxhcd->core_if.core_global_regs->gintsts, gintsts.d32);
-+ return 1;
-+}
-+
-+/** This function handles interrupts for the HCD. */
-+int32_t ifxhcd_handle_intr (ifxhcd_hcd_t *_ifxhcd)
-+{
-+ int retval = 0;
-+
-+ ifxusb_core_if_t *core_if = &_ifxhcd->core_if;
-+ /* AVM/BC 20101111 Unnecesary variable removed*/
-+ //gint_data_t gintsts,gintsts2;
-+ gint_data_t gintsts;
-+
-+ /* Check if HOST Mode */
-+ if (ifxusb_is_device_mode(core_if))
-+ {
-+ IFX_ERROR("%s() CRITICAL! IN DEVICE MODE\n", __func__);
-+ return 0;
-+ }
-+
-+ gintsts.d32 = ifxusb_read_core_intr(core_if);
-+
-+ if (!gintsts.d32)
-+ return 0;
-+
-+ //Common INT
-+ if (gintsts.b.modemismatch)
-+ {
-+ retval |= handle_mode_mismatch_intr(_ifxhcd);
-+ gintsts.b.modemismatch=0;
-+ }
-+ if (gintsts.b.otgintr)
-+ {
-+ retval |= handle_otg_intr(_ifxhcd);
-+ gintsts.b.otgintr=0;
-+ }
-+ if (gintsts.b.conidstschng)
-+ {
-+ retval |= handle_conn_id_status_change_intr(_ifxhcd);
-+ gintsts.b.conidstschng=0;
-+ }
-+ if (gintsts.b.disconnect)
-+ {
-+ retval |= handle_disconnect_intr(_ifxhcd);
-+ gintsts.b.disconnect=0;
-+ }
-+ if (gintsts.b.sessreqintr)
-+ {
-+ retval |= handle_session_req_intr(_ifxhcd);
-+ gintsts.b.sessreqintr=0;
-+ }
-+ if (gintsts.b.wkupintr)
-+ {
-+ retval |= handle_wakeup_detected_intr(_ifxhcd);
-+ gintsts.b.wkupintr=0;
-+ }
-+ if (gintsts.b.usbsuspend)
-+ {
-+ retval |= handle_usb_suspend_intr(_ifxhcd);
-+ gintsts.b.usbsuspend=0;
-+ }
-+
-+ //Host Int
-+ if (gintsts.b.sofintr)
-+ {
-+ retval |= handle_sof_intr (_ifxhcd);
-+ gintsts.b.sofintr=0;
-+ }
-+ if (gintsts.b.portintr)
-+ {
-+ retval |= handle_port_intr (_ifxhcd);
-+ gintsts.b.portintr=0;
-+ }
-+ if (gintsts.b.hcintr)
-+ {
-+ int i;
-+ haint_data_t haint;
-+ haint.d32 = ifxusb_read_host_all_channels_intr(core_if);
-+ for (i=0; i< core_if->params.host_channels; i++)
-+ if (haint.b2.chint & (1 << i))
-+ retval |= handle_hc_n_intr (_ifxhcd, i);
-+ gintsts.b.hcintr=0;
-+ }
-+ return retval;
-+}
---- /dev/null
-+++ b/drivers/usb/ifxhcd/ifxhcd_queue.c
-@@ -0,0 +1,418 @@
-+/*****************************************************************************
-+ ** FILE NAME : ifxhcd_queue.c
-+ ** PROJECT : IFX USB sub-system V3
-+ ** MODULES : IFX USB sub-system Host and Device driver
-+ ** SRC VERSION : 1.0
-+ ** DATE : 1/Jan/2009
-+ ** AUTHOR : Chen, Howard
-+ ** DESCRIPTION : This file contains the functions to manage Queue Heads and Queue
-+ ** Transfer Descriptors.
-+ *****************************************************************************/
-+
-+/*!
-+ \file ifxhcd_queue.c
-+ \ingroup IFXUSB_DRIVER_V3
-+ \brief This file contains the functions to manage Queue Heads and Queue
-+ Transfer Descriptors.
-+*/
-+#include <linux/version.h>
-+#include "ifxusb_version.h"
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/errno.h>
-+#include <linux/list.h>
-+#include <linux/interrupt.h>
-+#include <linux/string.h>
-+
-+#include "ifxusb_plat.h"
-+#include "ifxusb_regs.h"
-+#include "ifxusb_cif.h"
-+#include "ifxhcd.h"
-+
-+#ifdef __EPQD_DESTROY_TIMEOUT__
-+ #define epqh_self_destroy_timeout 5
-+ static void eqph_destroy_func(unsigned long _ptr)
-+ {
-+ ifxhcd_epqh_t *epqh=(ifxhcd_epqh_t *)_ptr;
-+ if(epqh)
-+ {
-+ ifxhcd_epqh_free (epqh);
-+ }
-+ }
-+#endif
-+
-+#define SCHEDULE_SLOP 10
-+
-+/*!
-+ \brief This function allocates and initializes a EPQH.
-+
-+ \param _ifxhcd The HCD state structure for the USB Host controller.
-+ \param[in] _urb Holds the information about the device/endpoint that we need
-+ to initialize the EPQH.
-+
-+ \return Returns pointer to the newly allocated EPQH, or NULL on error.
-+ */
-+ifxhcd_epqh_t *ifxhcd_epqh_create (ifxhcd_hcd_t *_ifxhcd, struct urb *_urb)
-+{
-+ ifxhcd_epqh_t *epqh;
-+
-+ hprt0_data_t hprt0;
-+ struct usb_host_endpoint *sysep = ifxhcd_urb_to_endpoint(_urb);
-+
-+ /* Allocate memory */
-+// epqh=(ifxhcd_epqh_t *) kmalloc (sizeof(ifxhcd_epqh_t), GFP_KERNEL);
-+ epqh=(ifxhcd_epqh_t *) kmalloc (sizeof(ifxhcd_epqh_t), GFP_ATOMIC);
-+
-+ if(epqh == NULL)
-+ return NULL;
-+
-+ memset (epqh, 0, sizeof (ifxhcd_epqh_t));
-+
-+ epqh->sysep=sysep;
-+
-+ /* Initialize EPQH */
-+ switch (usb_pipetype(_urb->pipe))
-+ {
-+ case PIPE_CONTROL : epqh->ep_type = IFXUSB_EP_TYPE_CTRL; break;
-+ case PIPE_BULK : epqh->ep_type = IFXUSB_EP_TYPE_BULK; break;
-+ case PIPE_ISOCHRONOUS: epqh->ep_type = IFXUSB_EP_TYPE_ISOC; break;
-+ case PIPE_INTERRUPT : epqh->ep_type = IFXUSB_EP_TYPE_INTR; break;
-+ }
-+
-+ //epqh->data_toggle = IFXUSB_HC_PID_DATA0;
-+
-+ epqh->mps = usb_maxpacket(_urb->dev, _urb->pipe, !(usb_pipein(_urb->pipe)));
-+
-+ hprt0.d32 = ifxusb_read_hprt0 (&_ifxhcd->core_if);
-+
-+ INIT_LIST_HEAD(&epqh->urbd_list);
-+ INIT_LIST_HEAD(&epqh->epqh_list_entry);
-+ epqh->hc = NULL;
-+
-+ epqh->dump_buf = ifxusb_alloc_buf(epqh->mps, 0);
-+
-+ /* FS/LS Enpoint on HS Hub
-+ * NOT virtual root hub */
-+ epqh->need_split = 0;
-+ epqh->pkt_count_limit=0;
-+ if(epqh->ep_type == IFXUSB_EP_TYPE_BULK && !(usb_pipein(_urb->pipe)) )
-+ epqh->pkt_count_limit=4;
-+ if (hprt0.b.prtspd == IFXUSB_HPRT0_PRTSPD_HIGH_SPEED &&
-+ ((_urb->dev->speed == USB_SPEED_LOW) ||
-+ (_urb->dev->speed == USB_SPEED_FULL)) &&
-+ (_urb->dev->tt) && (_urb->dev->tt->hub->devnum != 1))
-+ {
-+ IFX_DEBUGPL(DBG_HCD, "QH init: EP %d: TT found at hub addr %d, for port %d\n",
-+ usb_pipeendpoint(_urb->pipe), _urb->dev->tt->hub->devnum,
-+ _urb->dev->ttport);
-+ epqh->need_split = 1;
-+ epqh->pkt_count_limit=1;
-+ }
-+
-+ if (epqh->ep_type == IFXUSB_EP_TYPE_INTR ||
-+ epqh->ep_type == IFXUSB_EP_TYPE_ISOC)
-+ {
-+ /* Compute scheduling parameters once and save them. */
-+ epqh->interval = _urb->interval;
-+ if(epqh->need_split)
-+ epqh->interval *= 8;
-+ }
-+
-+ epqh->period_counter=0;
-+ epqh->is_active=0;
-+
-+ #ifdef __EPQD_DESTROY_TIMEOUT__
-+ /* Start a timer for this transfer. */
-+ init_timer(&epqh->destroy_timer);
-+ epqh->destroy_timer.function = eqph_destroy_func;
-+ epqh->destroy_timer.data = (unsigned long)(epqh);
-+ #endif
-+
-+ #ifdef __DEBUG__
-+ IFX_DEBUGPL(DBG_HCD , "IFXUSB HCD EPQH Initialized\n");
-+ IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH - epqh = %p\n", epqh);
-+ IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH - Device Address = %d EP %d, %s\n",
-+ _urb->dev->devnum,
-+ usb_pipeendpoint(_urb->pipe),
-+ usb_pipein(_urb->pipe) == USB_DIR_IN ? "IN" : "OUT");
-+ IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH - Speed = %s\n",
-+ ({ char *speed; switch (_urb->dev->speed) {
-+ case USB_SPEED_LOW: speed = "low" ; break;
-+ case USB_SPEED_FULL: speed = "full"; break;
-+ case USB_SPEED_HIGH: speed = "high"; break;
-+ default: speed = "?"; break;
-+ }; speed;}));
-+ IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH - Type = %s\n",
-+ ({
-+ char *type; switch (epqh->ep_type)
-+ {
-+ case IFXUSB_EP_TYPE_ISOC: type = "isochronous"; break;
-+ case IFXUSB_EP_TYPE_INTR: type = "interrupt" ; break;
-+ case IFXUSB_EP_TYPE_CTRL: type = "control" ; break;
-+ case IFXUSB_EP_TYPE_BULK: type = "bulk" ; break;
-+ default: type = "?"; break;
-+ };
-+ type;
-+ }));
-+ if (epqh->ep_type == IFXUSB_EP_TYPE_INTR)
-+ IFX_DEBUGPL(DBG_HCDV, "IFXUSB HCD EPQH - interval = %d\n", epqh->interval);
-+ #endif
-+
-+ return epqh;
-+}
-+
-+
-+
-+
-+
-+
-+/*!
-+ \brief Free the EPQH. EPQH should already be removed from a list.
-+ URBD list should already be empty if called from URB Dequeue.
-+
-+ \param[in] _epqh The EPQH to free.
-+ */
-+void ifxhcd_epqh_free (ifxhcd_epqh_t *_epqh)
-+{
-+ unsigned long flags;
-+
-+ if(_epqh->sysep) _epqh->sysep->hcpriv=NULL;
-+ _epqh->sysep=NULL;
-+
-+ if(!_epqh)
-+ return;
-+
-+ /* Free each QTD in the QTD list */
-+ local_irq_save (flags);
-+ if (!list_empty(&_epqh->urbd_list))
-+ IFX_WARN("%s() invalid epqh state\n",__func__);
-+
-+ #if defined(__UNALIGNED_BUFFER_ADJ__)
-+ if(_epqh->aligned_buf)
-+ ifxusb_free_buf(_epqh->aligned_buf);
-+ if(_epqh->aligned_setup)
-+ ifxusb_free_buf(_epqh->aligned_setup);
-+ #endif
-+
-+ if (!list_empty(&_epqh->epqh_list_entry))
-+ list_del_init(&_epqh->epqh_list_entry);
-+
-+ #ifdef __EPQD_DESTROY_TIMEOUT__
-+ del_timer(&_epqh->destroy_timer);
-+ #endif
-+ if(_epqh->dump_buf)
-+ ifxusb_free_buf(_epqh->dump_buf);
-+ _epqh->dump_buf=0;
-+
-+
-+ kfree (_epqh);
-+ local_irq_restore (flags);
-+}
-+
-+/*!
-+ \brief This function adds a EPQH to
-+
-+ \return 0 if successful, negative error code otherwise.
-+ */
-+void ifxhcd_epqh_ready(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh)
-+{
-+ unsigned long flags;
-+ local_irq_save(flags);
-+ if (list_empty(&_epqh->epqh_list_entry))
-+ {
-+ #ifdef __EN_ISOC__
-+ if (_epqh->ep_type == IFXUSB_EP_TYPE_ISOC)
-+ list_add_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_ready);
-+ else
-+ #endif
-+ if(_epqh->ep_type == IFXUSB_EP_TYPE_INTR)
-+ list_add_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_intr_ready);
-+ else
-+ list_add_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_np_ready);
-+ _epqh->is_active=0;
-+ }
-+ else if(!_epqh->is_active)
-+ {
-+ #ifdef __EN_ISOC__
-+ if (_epqh->ep_type == IFXUSB_EP_TYPE_ISOC)
-+ list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_ready);
-+ else
-+ #endif
-+ if(_epqh->ep_type == IFXUSB_EP_TYPE_INTR)
-+ list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_intr_ready);
-+ else
-+ list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_np_ready);
-+ }
-+ #ifdef __EPQD_DESTROY_TIMEOUT__
-+ del_timer(&_epqh->destroy_timer);
-+ #endif
-+ local_irq_restore(flags);
-+}
-+
-+void ifxhcd_epqh_active(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh)
-+{
-+ unsigned long flags;
-+ local_irq_save(flags);
-+ if (list_empty(&_epqh->epqh_list_entry))
-+ IFX_WARN("%s() invalid epqh state\n",__func__);
-+ #ifdef __EN_ISOC__
-+ if (_epqh->ep_type == IFXUSB_EP_TYPE_ISOC)
-+ list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_active);
-+ else
-+ #endif
-+ if(_epqh->ep_type == IFXUSB_EP_TYPE_INTR)
-+ list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_intr_active);
-+ else
-+ list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_np_active);
-+ _epqh->is_active=1;
-+ #ifdef __EPQD_DESTROY_TIMEOUT__
-+ del_timer(&_epqh->destroy_timer);
-+ #endif
-+ local_irq_restore(flags);
-+}
-+
-+void ifxhcd_epqh_idle(ifxhcd_hcd_t *_ifxhcd, ifxhcd_epqh_t *_epqh)
-+{
-+ unsigned long flags;
-+ local_irq_save(flags);
-+
-+ if (list_empty(&_epqh->urbd_list))
-+ {
-+ if(_epqh->ep_type == IFXUSB_EP_TYPE_ISOC || _epqh->ep_type == IFXUSB_EP_TYPE_INTR)
-+ {
-+ list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_stdby);
-+ }
-+ else
-+ {
-+ list_del_init(&_epqh->epqh_list_entry);
-+ #ifdef __EPQD_DESTROY_TIMEOUT__
-+ del_timer(&_epqh->destroy_timer);
-+ _epqh->destroy_timer.expires = jiffies + (HZ*epqh_self_destroy_timeout);
-+ add_timer(&_epqh->destroy_timer );
-+ #endif
-+ }
-+ }
-+ else
-+ {
-+ #ifdef __EN_ISOC__
-+ if (_epqh->ep_type == IFXUSB_EP_TYPE_ISOC)
-+ list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_isoc_ready);
-+ else
-+ #endif
-+ if(_epqh->ep_type == IFXUSB_EP_TYPE_INTR)
-+ list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_intr_ready);
-+ else
-+ list_move_tail(&_epqh->epqh_list_entry, &_ifxhcd->epqh_np_ready);
-+ }
-+ _epqh->is_active=0;
-+ local_irq_restore(flags);
-+}
-+
-+
-+void ifxhcd_epqh_idle_periodic(ifxhcd_epqh_t *_epqh)
-+{
-+ unsigned long flags;
-+ if(_epqh->ep_type != IFXUSB_EP_TYPE_ISOC && _epqh->ep_type != IFXUSB_EP_TYPE_INTR)
-+ return;
-+
-+ local_irq_save(flags);
-+
-+ if (list_empty(&_epqh->epqh_list_entry))
-+ IFX_WARN("%s() invalid epqh state\n",__func__);
-+ if (!list_empty(&_epqh->urbd_list))
-+ IFX_WARN("%s() invalid epqh state(not empty)\n",__func__);
-+
-+ _epqh->is_active=0;
-+ list_del_init(&_epqh->epqh_list_entry);
-+ #ifdef __EPQD_DESTROY_TIMEOUT__
-+ del_timer(&_epqh->destroy_timer);
-+ _epqh->destroy_timer.expires = jiffies + (HZ*epqh_self_destroy_timeout);
-+ add_timer(&_epqh->destroy_timer );
-+ #endif
-+
-+ local_irq_restore(flags);
-+}
-+
-+
-+int ifxhcd_urbd_create (ifxhcd_hcd_t *_ifxhcd,struct urb *_urb)
-+{
-+ ifxhcd_urbd_t *urbd;
-+ struct usb_host_endpoint *sysep;
-+ ifxhcd_epqh_t *epqh;
-+ unsigned long flags;
-+ /* == AVM/WK 20100714 retval correctly initialized ==*/
-+ int retval = -ENOMEM;
-+
-+ /*== AVM/BC 20100630 - Spinlock ==*/
-+ //local_irq_save(flags);
-+ SPIN_LOCK_IRQSAVE(&_ifxhcd->lock, flags);
-+
-+// urbd = (ifxhcd_urbd_t *) kmalloc (sizeof(ifxhcd_urbd_t), GFP_KERNEL);
-+ urbd = (ifxhcd_urbd_t *) kmalloc (sizeof(ifxhcd_urbd_t), GFP_ATOMIC);
-+ if (urbd != NULL) /* Initializes a QTD structure.*/
-+ {
-+ retval = 0;
-+ memset (urbd, 0, sizeof (ifxhcd_urbd_t));
-+
-+ sysep = ifxhcd_urb_to_endpoint(_urb);
-+ epqh = (ifxhcd_epqh_t *)sysep->hcpriv;
-+ if (epqh == NULL)
-+ {
-+ epqh = ifxhcd_epqh_create (_ifxhcd, _urb);
-+ if (epqh == NULL)
-+ {
-+ retval = -ENOSPC;
-+ kfree(urbd);
-+ //local_irq_restore (flags);
-+ SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
-+ return retval;
-+ }
-+ sysep->hcpriv = epqh;
-+ }
-+
-+ INIT_LIST_HEAD(&urbd->urbd_list_entry);
-+
-+ /*== AVM/BC 20100630 - 2.6.28 needs HCD link/unlink URBs ==*/
-+ retval = usb_hcd_link_urb_to_ep(ifxhcd_to_syshcd(_ifxhcd), _urb);
-+
-+ if (unlikely(retval)){
-+ kfree(urbd);
-+ kfree(epqh);
-+ SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
-+ return retval;
-+ }
-+
-+ list_add_tail(&urbd->urbd_list_entry, &epqh->urbd_list);
-+ urbd->urb = _urb;
-+ _urb->hcpriv = urbd;
-+
-+ urbd->epqh=epqh;
-+ urbd->is_in=usb_pipein(_urb->pipe) ? 1 : 0;;
-+
-+ urbd->xfer_len=_urb->transfer_buffer_length;
-+#define URB_NO_SETUP_DMA_MAP 0
-+
-+ if(urbd->xfer_len>0)
-+ {
-+ if(_urb->transfer_flags && URB_NO_TRANSFER_DMA_MAP)
-+ urbd->xfer_buff = (uint8_t *) (KSEG1ADDR((uint32_t *)_urb->transfer_dma));
-+ else
-+ urbd->xfer_buff = (uint8_t *) _urb->transfer_buffer;
-+ }
-+ if(epqh->ep_type == IFXUSB_EP_TYPE_CTRL)
-+ {
-+ if(_urb->transfer_flags && URB_NO_SETUP_DMA_MAP)
-+ urbd->setup_buff = (uint8_t *) (KSEG1ADDR((uint32_t *)_urb->setup_dma));
-+ else
-+ urbd->setup_buff = (uint8_t *) _urb->setup_packet;
-+ }
-+ }
-+ //local_irq_restore (flags);
-+ SPIN_UNLOCK_IRQRESTORE(&_ifxhcd->lock, flags);
-+ return retval;
-+}
-+
---- /dev/null
-+++ b/drivers/usb/ifxhcd/ifxusb_cif.c
-@@ -0,0 +1,1458 @@
-+/*****************************************************************************
-+ ** FILE NAME : ifxusb_cif.c
-+ ** PROJECT : IFX USB sub-system V3
-+ ** MODULES : IFX USB sub-system Host and Device driver
-+ ** SRC VERSION : 1.0
-+ ** DATE : 1/Jan/2009
-+ ** AUTHOR : Chen, Howard
-+ ** DESCRIPTION : The Core Interface provides basic services for accessing and
-+ ** managing the IFX USB hardware. These services are used by both the
-+ ** Host Controller Driver and the Peripheral Controller Driver.
-+ *****************************************************************************/
-+
-+/*!
-+ \file ifxusb_cif.c
-+ \ingroup IFXUSB_DRIVER_V3
-+ \brief This file contains the interface to the IFX USB Core.
-+*/
-+
-+#include <linux/clk.h>
-+#include <linux/version.h>
-+#include "ifxusb_version.h"
-+
-+#include <asm/byteorder.h>
-+#include <asm/unaligned.h>
-+
-+
-+#include <linux/jiffies.h>
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+#include <linux/ioport.h>
-+
-+#if defined(__UEIP__)
-+// #include <asm/ifx/ifx_pmu.h>
-+// #include <ifx_pmu.h>
-+#endif
-+
-+
-+#include "ifxusb_plat.h"
-+#include "ifxusb_regs.h"
-+#include "ifxusb_cif.h"
-+
-+
-+#ifdef __IS_DEVICE__
-+ #include "ifxpcd.h"
-+#endif
-+
-+#ifdef __IS_HOST__
-+ #include "ifxhcd.h"
-+#endif
-+
-+#include <linux/mm.h>
-+
-+#include <linux/gfp.h>
-+
-+#if defined(__UEIP__)
-+// #include <asm/ifx/ifx_board.h>
-+ //#include <ifx_board.h>
-+#endif
-+
-+//#include <asm/ifx/ifx_gpio.h>
-+//#include <ifx_gpio.h>
-+#if defined(__UEIP__)
-+// #include <asm/ifx/ifx_led.h>
-+ //#include <ifx_led.h>
-+#endif
-+
-+
-+
-+#if defined(__UEIP__)
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
-+ #ifndef USB_CTRL_PMU_SETUP
-+ #define USB_CTRL_PMU_SETUP(__x) USB0_CTRL_PMU_SETUP(__x)
-+ #endif
-+ #ifndef USB_PHY_PMU_SETUP
-+ #define USB_PHY_PMU_SETUP(__x) USB0_PHY_PMU_SETUP(__x)
-+ #endif
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
-+#endif // defined(__UEIP__)
-+
-+/*!
-+ \brief This function is called to allocate buffer of specified size.
-+ The allocated buffer is mapped into DMA accessable address.
-+ \param size Size in BYTE to be allocated
-+ \param clear 0: don't do clear after buffer allocated, other: do clear to zero
-+ \return 0/NULL: Fail; uncached pointer of allocated buffer
-+ */
-+void *ifxusb_alloc_buf(size_t size, int clear)
-+{
-+ uint32_t *cached,*uncached;
-+ uint32_t totalsize,page;
-+
-+ if(!size)
-+ return 0;
-+
-+ size=(size+3)&0xFFFFFFFC;
-+ totalsize=size + 12;
-+ page=get_order(totalsize);
-+
-+ cached = (void *) __get_free_pages(( GFP_ATOMIC | GFP_DMA), page);
-+
-+ if(!cached)
-+ {
-+ IFX_PRINT("%s Allocation Failed size:%d\n",__func__,size);
-+ return NULL;
-+ }
-+
-+ uncached = (uint32_t *)(KSEG1ADDR(cached));
-+ if(clear)
-+ memset(uncached, 0, totalsize);
-+
-+ *(uncached+0)=totalsize;
-+ *(uncached+1)=page;
-+ *(uncached+2)=(uint32_t)cached;
-+ return (void *)(uncached+3);
-+}
-+
-+
-+/*!
-+ \brief This function is called to free allocated buffer.
-+ \param vaddr the uncached pointer of the buffer
-+ */
-+void ifxusb_free_buf(void *vaddr)
-+{
-+ uint32_t totalsize,page;
-+ uint32_t *cached,*uncached;
-+
-+ if(vaddr != NULL)
-+ {
-+ uncached=vaddr;
-+ uncached-=3;
-+ totalsize=*(uncached+0);
-+ page=*(uncached+1);
-+ cached=(uint32_t *)(*(uncached+2));
-+ if(totalsize && page==get_order(totalsize) && cached==(uint32_t *)(KSEG0ADDR(uncached)))
-+ {
-+ free_pages((unsigned long)cached, page);
-+ return;
-+ }
-+ // the memory is not allocated by ifxusb_alloc_buf. Allowed but must be careful.
-+ return;
-+ }
-+}
-+
-+
-+
-+/*!
-+ \brief This function is called to initialize the IFXUSB CSR data
-+ structures. The register addresses in the device and host
-+ structures are initialized from the base address supplied by the
-+ caller. The calling function must make the OS calls to get the
-+ base address of the IFXUSB controller registers.
-+
-+ \param _core_if Pointer of core_if structure
-+ \param _irq irq number
-+ \param _reg_base_addr Base address of IFXUSB core registers
-+ \param _fifo_base_addr Fifo base address
-+ \param _fifo_dbg_addr Fifo debug address
-+ \return 0: success;
-+ */
-+int ifxusb_core_if_init(ifxusb_core_if_t *_core_if,
-+ int _irq,
-+ uint32_t _reg_base_addr,
-+ uint32_t _fifo_base_addr,
-+ uint32_t _fifo_dbg_addr)
-+{
-+ int retval = 0;
-+ uint32_t *reg_base =NULL;
-+ uint32_t *fifo_base =NULL;
-+ uint32_t *fifo_dbg =NULL;
-+
-+ int i;
-+
-+ IFX_DEBUGPL(DBG_CILV, "%s(%p,%d,0x%08X,0x%08X,0x%08X)\n", __func__,
-+ _core_if,
-+ _irq,
-+ _reg_base_addr,
-+ _fifo_base_addr,
-+ _fifo_dbg_addr);
-+
-+ if( _core_if == NULL)
-+ {
-+ IFX_ERROR("%s() invalid _core_if\n", __func__);
-+ retval = -ENOMEM;
-+ goto fail;
-+ }
-+
-+ //memset(_core_if, 0, sizeof(ifxusb_core_if_t));
-+
-+ _core_if->irq=_irq;
-+
-+ reg_base =ioremap_nocache(_reg_base_addr , IFXUSB_IOMEM_SIZE );
-+ fifo_base =ioremap_nocache(_fifo_base_addr, IFXUSB_FIFOMEM_SIZE);
-+ fifo_dbg =ioremap_nocache(_fifo_dbg_addr , IFXUSB_FIFODBG_SIZE);
-+ if( reg_base == NULL || fifo_base == NULL || fifo_dbg == NULL)
-+ {
-+ IFX_ERROR("%s() usb ioremap() failed\n", __func__);
-+ retval = -ENOMEM;
-+ goto fail;
-+ }
-+
-+ _core_if->core_global_regs = (ifxusb_core_global_regs_t *)reg_base;
-+
-+ /*
-+ * Attempt to ensure this device is really a IFXUSB Controller.
-+ * Read and verify the SNPSID register contents. The value should be
-+ * 0x45F42XXX
-+ */
-+ {
-+ int32_t snpsid;
-+ snpsid = ifxusb_rreg(&_core_if->core_global_regs->gsnpsid);
-+ if ((snpsid & 0xFFFFF000) != 0x4F542000)
-+ {
-+ IFX_ERROR("%s() snpsid error(0x%08x) failed\n", __func__,snpsid);
-+ retval = -EINVAL;
-+ goto fail;
-+ }
-+ _core_if->snpsid=snpsid;
-+ }
-+
-+ #ifdef __IS_HOST__
-+ _core_if->host_global_regs = (ifxusb_host_global_regs_t *)
-+ ((uint32_t)reg_base + IFXUSB_HOST_GLOBAL_REG_OFFSET);
-+ _core_if->hprt0 = (uint32_t*)((uint32_t)reg_base + IFXUSB_HOST_PORT_REGS_OFFSET);
-+
-+ for (i=0; i<MAX_EPS_CHANNELS; i++)
-+ {
-+ _core_if->hc_regs[i] = (ifxusb_hc_regs_t *)
-+ ((uint32_t)reg_base + IFXUSB_HOST_CHAN_REGS_OFFSET +
-+ (i * IFXUSB_CHAN_REGS_OFFSET));
-+ IFX_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n",
-+ i, &_core_if->hc_regs[i]->hcchar);
-+ }
-+ #endif //__IS_HOST__
-+
-+ #ifdef __IS_DEVICE__
-+ _core_if->dev_global_regs =
-+ (ifxusb_device_global_regs_t *)((uint32_t)reg_base + IFXUSB_DEV_GLOBAL_REG_OFFSET);
-+
-+ for (i=0; i<MAX_EPS_CHANNELS; i++)
-+ {
-+ _core_if->in_ep_regs[i] = (ifxusb_dev_in_ep_regs_t *)
-+ ((uint32_t)reg_base + IFXUSB_DEV_IN_EP_REG_OFFSET +
-+ (i * IFXUSB_EP_REG_OFFSET));
-+ _core_if->out_ep_regs[i] = (ifxusb_dev_out_ep_regs_t *)
-+ ((uint32_t)reg_base + IFXUSB_DEV_OUT_EP_REG_OFFSET +
-+ (i * IFXUSB_EP_REG_OFFSET));
-+ IFX_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p/%p %p/0x%08X/0x%08X\n",
-+ i, &_core_if->in_ep_regs[i]->diepctl, _core_if->in_ep_regs[i],
-+ reg_base,IFXUSB_DEV_IN_EP_REG_OFFSET,(i * IFXUSB_EP_REG_OFFSET)
-+ );
-+ IFX_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p/%p %p/0x%08X/0x%08X\n",
-+ i, &_core_if->out_ep_regs[i]->doepctl, _core_if->out_ep_regs[i],
-+ reg_base,IFXUSB_DEV_OUT_EP_REG_OFFSET,(i * IFXUSB_EP_REG_OFFSET)
-+ );
-+ }
-+ #endif //__IS_DEVICE__
-+
-+ /* Setting the FIFO and other Address. */
-+ for (i=0; i<MAX_EPS_CHANNELS; i++)
-+ {
-+ _core_if->data_fifo[i] = fifo_base + (i * IFXUSB_DATA_FIFO_SIZE);
-+ IFX_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08x\n",
-+ i, (unsigned)_core_if->data_fifo[i]);
-+ }
-+
-+ _core_if->data_fifo_dbg = fifo_dbg;
-+ _core_if->pcgcctl = (uint32_t*)(((uint32_t)reg_base) + IFXUSB_PCGCCTL_OFFSET);
-+
-+ /*
-+ * Store the contents of the hardware configuration registers here for
-+ * easy access later.
-+ */
-+ _core_if->hwcfg1.d32 = ifxusb_rreg(&_core_if->core_global_regs->ghwcfg1);
-+ _core_if->hwcfg2.d32 = ifxusb_rreg(&_core_if->core_global_regs->ghwcfg2);
-+ _core_if->hwcfg3.d32 = ifxusb_rreg(&_core_if->core_global_regs->ghwcfg3);
-+ _core_if->hwcfg4.d32 = ifxusb_rreg(&_core_if->core_global_regs->ghwcfg4);
-+
-+ IFX_DEBUGPL(DBG_CILV,"hwcfg1=%08x\n",_core_if->hwcfg1.d32);
-+ IFX_DEBUGPL(DBG_CILV,"hwcfg2=%08x\n",_core_if->hwcfg2.d32);
-+ IFX_DEBUGPL(DBG_CILV,"hwcfg3=%08x\n",_core_if->hwcfg3.d32);
-+ IFX_DEBUGPL(DBG_CILV,"hwcfg4=%08x\n",_core_if->hwcfg4.d32);
-+
-+
-+ #ifdef __DED_FIFO__
-+ IFX_PRINT("Waiting for PHY Clock Lock!\n");
-+ while(!( ifxusb_rreg(&_core_if->core_global_regs->grxfsiz) & (1<<9)))
-+ {
-+ }
-+ IFX_PRINT("PHY Clock Locked!\n");
-+ //ifxusb_clean_spram(_core_if,128*1024/4);
-+ #endif
-+
-+ /* Create new workqueue and init works */
-+#if 0
-+ _core_if->wq_usb = create_singlethread_workqueue(_core_if->core_name);
-+
-+ if(_core_if->wq_usb == 0)
-+ {
-+ IFX_DEBUGPL(DBG_CIL, "Creation of wq_usb failed\n");
-+ retval = -EINVAL;
-+ goto fail;
-+ }
-+
-+ #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change, core_if);
-+ INIT_WORK(&core_if->w_wkp, w_wakeup_detected, core_if);
-+ #else
-+ INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change);
-+ INIT_DELAYED_WORK(&core_if->w_wkp, w_wakeup_detected);
-+ #endif
-+#endif
-+ return 0;
-+
-+fail:
-+ if( reg_base != NULL) iounmap(reg_base );
-+ if( fifo_base != NULL) iounmap(fifo_base);
-+ if( fifo_dbg != NULL) iounmap(fifo_dbg );
-+ return retval;
-+}
-+
-+/*!
-+ \brief This function free the mapped address in the IFXUSB CSR data structures.
-+ \param _core_if Pointer of core_if structure
-+ */
-+void ifxusb_core_if_remove(ifxusb_core_if_t *_core_if)
-+{
-+ /* Disable all interrupts */
-+ if( _core_if->core_global_regs != NULL)
-+ {
-+ ifxusb_mreg( &_core_if->core_global_regs->gahbcfg, 1, 0);
-+ ifxusb_wreg( &_core_if->core_global_regs->gintmsk, 0);
-+ }
-+
-+ if( _core_if->core_global_regs != NULL) iounmap(_core_if->core_global_regs );
-+ if( _core_if->data_fifo[0] != NULL) iounmap(_core_if->data_fifo[0] );
-+ if( _core_if->data_fifo_dbg != NULL) iounmap(_core_if->data_fifo_dbg );
-+
-+#if 0
-+ if (_core_if->wq_usb)
-+ destroy_workqueue(_core_if->wq_usb);
-+#endif
-+ memset(_core_if, 0, sizeof(ifxusb_core_if_t));
-+}
-+
-+
-+
-+
-+/*!
-+ \brief This function enbles the controller's Global Interrupt in the AHB Config register.
-+ \param _core_if Pointer of core_if structure
-+ */
-+void ifxusb_enable_global_interrupts( ifxusb_core_if_t *_core_if )
-+{
-+ gahbcfg_data_t ahbcfg ={ .d32 = 0};
-+ ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
-+ ifxusb_mreg(&_core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32);
-+}
-+
-+/*!
-+ \brief This function disables the controller's Global Interrupt in the AHB Config register.
-+ \param _core_if Pointer of core_if structure
-+ */
-+void ifxusb_disable_global_interrupts( ifxusb_core_if_t *_core_if )
-+{
-+ gahbcfg_data_t ahbcfg ={ .d32 = 0};
-+ ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
-+ ifxusb_mreg(&_core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
-+}
-+
-+
-+
-+
-+/*!
-+ \brief Flush Tx and Rx FIFO.
-+ \param _core_if Pointer of core_if structure
-+ */
-+void ifxusb_flush_both_fifo( ifxusb_core_if_t *_core_if )
-+{
-+ ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
-+ volatile grstctl_t greset ={ .d32 = 0};
-+ int count = 0;
-+
-+ IFX_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__);
-+ greset.b.rxfflsh = 1;
-+ greset.b.txfflsh = 1;
-+ greset.b.txfnum = 0x10;
-+ greset.b.intknqflsh=1;
-+ greset.b.hstfrm=1;
-+ ifxusb_wreg( &global_regs->grstctl, greset.d32 );
-+
-+ do
-+ {
-+ greset.d32 = ifxusb_rreg( &global_regs->grstctl);
-+ if (++count > 10000)
-+ {
-+ IFX_WARN("%s() HANG! GRSTCTL=%0x\n", __func__, greset.d32);
-+ break;
-+ }
-+ } while (greset.b.rxfflsh == 1 || greset.b.txfflsh == 1);
-+ /* Wait for 3 PHY Clocks*/
-+ UDELAY(1);
-+}
-+
-+/*!
-+ \brief Flush a Tx FIFO.
-+ \param _core_if Pointer of core_if structure
-+ \param _num Tx FIFO to flush. ( 0x10 for ALL TX FIFO )
-+ */
-+void ifxusb_flush_tx_fifo( ifxusb_core_if_t *_core_if, const int _num )
-+{
-+ ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
-+ volatile grstctl_t greset ={ .d32 = 0};
-+ int count = 0;
-+
-+ IFX_DEBUGPL((DBG_CIL|DBG_PCDV), "Flush Tx FIFO %d\n", _num);
-+
-+ greset.b.intknqflsh=1;
-+ greset.b.txfflsh = 1;
-+ greset.b.txfnum = _num;
-+ ifxusb_wreg( &global_regs->grstctl, greset.d32 );
-+
-+ do
-+ {
-+ greset.d32 = ifxusb_rreg( &global_regs->grstctl);
-+ if (++count > 10000&&(_num==0 ||_num==0x10))
-+ {
-+ IFX_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
-+ __func__, greset.d32,
-+ ifxusb_rreg( &global_regs->gnptxsts));
-+ break;
-+ }
-+ } while (greset.b.txfflsh == 1);
-+ /* Wait for 3 PHY Clocks*/
-+ UDELAY(1);
-+}
-+
-+
-+/*!
-+ \brief Flush Rx FIFO.
-+ \param _core_if Pointer of core_if structure
-+ */
-+void ifxusb_flush_rx_fifo( ifxusb_core_if_t *_core_if )
-+{
-+ ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
-+ volatile grstctl_t greset ={ .d32 = 0};
-+ int count = 0;
-+
-+ IFX_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__);
-+ greset.b.rxfflsh = 1;
-+ ifxusb_wreg( &global_regs->grstctl, greset.d32 );
-+
-+ do
-+ {
-+ greset.d32 = ifxusb_rreg( &global_regs->grstctl);
-+ if (++count > 10000)
-+ {
-+ IFX_WARN("%s() HANG! GRSTCTL=%0x\n", __func__, greset.d32);
-+ break;
-+ }
-+ } while (greset.b.rxfflsh == 1);
-+ /* Wait for 3 PHY Clocks*/
-+ UDELAY(1);
-+}
-+
-+
-+#define SOFT_RESET_DELAY 100
-+
-+/*!
-+ \brief Do a soft reset of the core. Be careful with this because it
-+ resets all the internal state machines of the core.
-+ \param _core_if Pointer of core_if structure
-+ */
-+int ifxusb_core_soft_reset(ifxusb_core_if_t *_core_if)
-+{
-+ ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
-+ volatile grstctl_t greset ={ .d32 = 0};
-+ int count = 0;
-+
-+ IFX_DEBUGPL(DBG_CILV, "%s\n", __func__);
-+ /* Wait for AHB master IDLE state. */
-+ do
-+ {
-+ UDELAY(10);
-+ greset.d32 = ifxusb_rreg( &global_regs->grstctl);
-+ if (++count > 100000)
-+ {
-+ IFX_WARN("%s() HANG! AHB Idle GRSTCTL=%0x %x\n", __func__,
-+ greset.d32, greset.b.ahbidle);
-+ break;
-+ }
-+ } while (greset.b.ahbidle == 0);
-+
-+ UDELAY(1);
-+
-+ /* Core Soft Reset */
-+ count = 0;
-+ greset.b.csftrst = 1;
-+ ifxusb_wreg( &global_regs->grstctl, greset.d32 );
-+
-+ #ifdef SOFT_RESET_DELAY
-+ MDELAY(SOFT_RESET_DELAY);
-+ #endif
-+
-+ do
-+ {
-+ UDELAY(10);
-+ greset.d32 = ifxusb_rreg( &global_regs->grstctl);
-+ if (++count > 100000)
-+ {
-+ IFX_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", __func__, greset.d32);
-+ return -1;
-+ }
-+ } while (greset.b.csftrst == 1);
-+
-+ #ifdef SOFT_RESET_DELAY
-+ MDELAY(SOFT_RESET_DELAY);
-+ #endif
-+
-+
-+ #if defined(__IS_VR9__)
-+ if(_core_if->core_no==0)
-+ {
-+ set_bit (4, VR9_RCU_USBRESET2);
-+ MDELAY(50);
-+ clear_bit (4, VR9_RCU_USBRESET2);
-+ }
-+ else
-+ {
-+ set_bit (5, VR9_RCU_USBRESET2);
-+ MDELAY(50);
-+ clear_bit (5, VR9_RCU_USBRESET2);
-+ }
-+ MDELAY(50);
-+ #endif //defined(__IS_VR9__)
-+
-+ IFX_PRINT("USB core #%d soft-reset\n",_core_if->core_no);
-+
-+ return 0;
-+}
-+
-+/*!
-+ \brief Turn on the USB Core Power
-+ \param _core_if Pointer of core_if structure
-+*/
-+void ifxusb_power_on (ifxusb_core_if_t *_core_if)
-+{
-+ struct clk *clk0 = clk_get_sys("usb0", NULL);
-+ struct clk *clk1 = clk_get_sys("usb1", NULL);
-+ // set clock gating
-+ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-+ #if defined(__UEIP__)
-+
-+ #if defined(__IS_TWINPASS) || defined(__IS_DANUBE__)
-+ set_bit (4, (volatile unsigned long *)DANUBE_CGU_IFCCR);
-+ set_bit (5, (volatile unsigned long *)DANUBE_CGU_IFCCR);
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ #if defined(__IS_AMAZON_SE__)
-+ // clear_bit (4, (volatile unsigned long *)AMAZON_SE_CGU_IFCCR);
-+ clear_bit (5, (volatile unsigned long *)AMAZON_SE_CGU_IFCCR);
-+ #endif //defined(__IS_AMAZON_SE__)
-+ #if defined(__IS_AR9__)
-+ set_bit (0, (volatile unsigned long *)AR9_CGU_IFCCR);
-+ set_bit (1, (volatile unsigned long *)AR9_CGU_IFCCR);
-+ #endif //defined(__IS_AR9__)
-+ #if defined(__IS_VR9__)
-+// set_bit (0, (volatile unsigned long *)VR9_CGU_IFCCR);
-+// set_bit (1, (volatile unsigned long *)VR9_CGU_IFCCR);
-+ #endif //defined(__IS_VR9__)
-+
-+ MDELAY(50);
-+
-+ // set power
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
-+ USB_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
-+ //#if defined(__IS_TWINPASS__)
-+ // ifxusb_enable_afe_oc();
-+ //#endif
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
-+ #if defined(__IS_AR9__) || defined(__IS_VR9__)
-+ if(_core_if->core_no==0)
-+ clk_enable(clk0);
-+// USB0_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
-+ else
-+ clk_enable(clk1);
-+// USB1_CTRL_PMU_SETUP(IFX_PMU_ENABLE);
-+ #endif //defined(__IS_AR9__) || defined(__IS_VR9__)
-+
-+ if(_core_if->core_global_regs)
-+ {
-+ // PHY configurations.
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ #if defined(__IS_AMAZON_SE__)
-+ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_AMAZON_SE__)
-+ #if defined(__IS_AR9__)
-+ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_AR9__)
-+ #if defined(__IS_VR9__)
-+ //ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_VR9__)
-+ }
-+ #else //defined(__UEIP__)
-+ #if defined(__IS_TWINPASS) || defined(__IS_DANUBE__)
-+ set_bit (4, (volatile unsigned long *)DANUBE_CGU_IFCCR);
-+ set_bit (5, (volatile unsigned long *)DANUBE_CGU_IFCCR);
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ #if defined(__IS_AMAZON_SE__)
-+ // clear_bit (4, (volatile unsigned long *)AMAZON_SE_CGU_IFCCR);
-+ clear_bit (5, (volatile unsigned long *)AMAZON_SE_CGU_IFCCR);
-+ #endif //defined(__IS_AMAZON_SE__)
-+ #if defined(__IS_AR9__)
-+ set_bit (0, (volatile unsigned long *)AMAZON_S_CGU_IFCCR);
-+ set_bit (1, (volatile unsigned long *)AMAZON_S_CGU_IFCCR);
-+ #endif //defined(__IS_AR9__)
-+
-+ MDELAY(50);
-+
-+ // set power
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ clear_bit (6, (volatile unsigned long *)DANUBE_PMU_PWDCR);//USB
-+ clear_bit (9, (volatile unsigned long *)DANUBE_PMU_PWDCR);//DSL
-+ clear_bit (15, (volatile unsigned long *)DANUBE_PMU_PWDCR);//AHB
-+ #if defined(__IS_TWINPASS__)
-+ ifxusb_enable_afe_oc();
-+ #endif
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ #if defined(__IS_AMAZON_SE__)
-+ clear_bit (6, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);
-+ clear_bit (9, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);
-+ clear_bit (15, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);
-+ #endif //defined(__IS_AMAZON_SE__)
-+ #if defined(__IS_AR9__)
-+ if(_core_if->core_no==0)
-+ clear_bit (6, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//USB
-+ else
-+ clear_bit (27, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//USB
-+ clear_bit (9, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//DSL
-+ clear_bit (15, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//AHB
-+ #endif //defined(__IS_AR9__)
-+
-+ if(_core_if->core_global_regs)
-+ {
-+ // PHY configurations.
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ #if defined(__IS_AMAZON_SE__)
-+ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_AMAZON_SE__)
-+ #if defined(__IS_AR9__)
-+ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_AR9__)
-+ }
-+
-+ #endif //defined(__UEIP__)
-+}
-+
-+/*!
-+ \brief Turn off the USB Core Power
-+ \param _core_if Pointer of core_if structure
-+*/
-+void ifxusb_power_off (ifxusb_core_if_t *_core_if)
-+{
-+ struct clk *clk0 = clk_get_sys("usb0", NULL);
-+ struct clk *clk1 = clk_get_sys("usb1", NULL);
-+ ifxusb_phy_power_off (_core_if);
-+
-+ // set power
-+ #if defined(__UEIP__)
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
-+ USB_CTRL_PMU_SETUP(IFX_PMU_DISABLE);
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
-+ #if defined(__IS_AR9__) || defined(__IS_VR9__)
-+ if(_core_if->core_no==0)
-+ clk_disable(clk0);
-+ //USB0_CTRL_PMU_SETUP(IFX_PMU_DISABLE);
-+ else
-+ clk_disable(clk1);
-+ //USB1_CTRL_PMU_SETUP(IFX_PMU_DISABLE);
-+ #endif //defined(__IS_AR9__) || defined(__IS_VR9__)
-+ #else //defined(__UEIP__)
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ set_bit (6, (volatile unsigned long *)DANUBE_PMU_PWDCR);//USB
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ #if defined(__IS_AMAZON_SE__)
-+ set_bit (6, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);//USB
-+ #endif //defined(__IS_AMAZON_SE__)
-+ #if defined(__IS_AR9__)
-+ if(_core_if->core_no==0)
-+ set_bit (6, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//USB
-+ else
-+ set_bit (27, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//USB
-+ #endif //defined(__IS_AR9__)
-+ #endif //defined(__UEIP__)
-+}
-+
-+/*!
-+ \brief Turn on the USB PHY Power
-+ \param _core_if Pointer of core_if structure
-+*/
-+void ifxusb_phy_power_on (ifxusb_core_if_t *_core_if)
-+{
-+ struct clk *clk0 = clk_get_sys("usb0", NULL);
-+ struct clk *clk1 = clk_get_sys("usb1", NULL);
-+ #if defined(__UEIP__)
-+ if(_core_if->core_global_regs)
-+ {
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ #if defined(__IS_AMAZON_SE__)
-+ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_AMAZON_SE__)
-+ #if defined(__IS_AR9__)
-+ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_AR9__)
-+ #if defined(__IS_VR9_S__)
-+ if(_core_if->core_no==0)
-+ set_bit (0, VR9_RCU_USB_ANA_CFG1A);
-+ else
-+ set_bit (0, VR9_RCU_USB_ANA_CFG1B);
-+ #endif //defined(__IS_VR9__)
-+ }
-+
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
-+ USB_PHY_PMU_SETUP(IFX_PMU_ENABLE);
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
-+ #if defined(__IS_AR9__) || defined(__IS_VR9__)
-+ if(_core_if->core_no==0)
-+ clk_enable(clk0);
-+ //USB0_PHY_PMU_SETUP(IFX_PMU_ENABLE);
-+ else
-+ clk_enable(clk1);
-+ //USB1_PHY_PMU_SETUP(IFX_PMU_ENABLE);
-+ #endif //defined(__IS_AR9__) || defined(__IS_VR9__)
-+
-+ // PHY configurations.
-+ if(_core_if->core_global_regs)
-+ {
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ #if defined(__IS_AMAZON_SE__)
-+ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_AMAZON_SE__)
-+ #if defined(__IS_AR9__)
-+ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_AR9__)
-+ #if defined(__IS_VR9_S__)
-+ if(_core_if->core_no==0)
-+ set_bit (0, VR9_RCU_USB_ANA_CFG1A);
-+ else
-+ set_bit (0, VR9_RCU_USB_ANA_CFG1B);
-+ #endif //defined(__IS_VR9__)
-+ }
-+ #else //defined(__UEIP__)
-+ // PHY configurations.
-+ if(_core_if->core_global_regs)
-+ {
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ #if defined(__IS_AMAZON_SE__)
-+ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_AMAZON_SE__)
-+ #if defined(__IS_AR9__)
-+ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_AR9__)
-+ }
-+
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ clear_bit (0, (volatile unsigned long *)DANUBE_PMU_PWDCR);//PHY
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ #if defined(__IS_AMAZON_SE__)
-+ clear_bit (0, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);
-+ #endif //defined(__IS_AMAZON_SE__)
-+ #if defined(__IS_AR9__)
-+ if(_core_if->core_no==0)
-+ clear_bit (0, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//PHY
-+ else
-+ clear_bit (26, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//PHY
-+ #endif //defined(__IS_AR9__)
-+
-+ // PHY configurations.
-+ if(_core_if->core_global_regs)
-+ {
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ #if defined(__IS_AMAZON_SE__)
-+ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_AMAZON_SE__)
-+ #if defined(__IS_AR9__)
-+ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_AR9__)
-+ }
-+ #endif //defined(__UEIP__)
-+}
-+
-+
-+/*!
-+ \brief Turn off the USB PHY Power
-+ \param _core_if Pointer of core_if structure
-+*/
-+void ifxusb_phy_power_off (ifxusb_core_if_t *_core_if)
-+{
-+ struct clk *clk0 = clk_get_sys("usb0", NULL);
-+ struct clk *clk1 = clk_get_sys("usb1", NULL);
-+ #if defined(__UEIP__)
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
-+ USB_PHY_PMU_SETUP(IFX_PMU_DISABLE);
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__) || defined(__IS_AMAZON_SE__)
-+ #if defined(__IS_AR9__) || defined(__IS_VR9__)
-+ if(_core_if->core_no==0)
-+ clk_disable(clk0);
-+ //USB0_PHY_PMU_SETUP(IFX_PMU_DISABLE);
-+ else
-+ clk_disable(clk1);
-+ //USB1_PHY_PMU_SETUP(IFX_PMU_DISABLE);
-+ #endif // defined(__IS_AR9__) || defined(__IS_VR9__)
-+ #else //defined(__UEIP__)
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ set_bit (0, (volatile unsigned long *)DANUBE_PMU_PWDCR);//PHY
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ #if defined(__IS_AMAZON_SE__)
-+ set_bit (0, (volatile unsigned long *)AMAZON_SE_PMU_PWDCR);//PHY
-+ #endif //defined(__IS_AMAZON_SE__)
-+ #if defined(__IS_AR9__)
-+ if(_core_if->core_no==0)
-+ set_bit (0, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//PHY
-+ else
-+ set_bit (26, (volatile unsigned long *)AMAZON_S_PMU_PWDCR);//PHY
-+ #endif //defined(__IS_AR9__)
-+ #endif //defined(__UEIP__)
-+}
-+
-+
-+/*!
-+ \brief Reset on the USB Core RCU
-+ \param _core_if Pointer of core_if structure
-+ */
-+#if defined(__IS_VR9__)
-+ int already_hard_reset=0;
-+#endif
-+void ifxusb_hard_reset(ifxusb_core_if_t *_core_if)
-+{
-+ #if defined(__UEIP__)
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ #if defined (__IS_HOST__)
-+ clear_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
-+ #elif defined (__IS_DEVICE__)
-+ set_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
-+ #endif
-+ #endif //defined(__IS_AMAZON_SE__)
-+
-+ #if defined(__IS_AMAZON_SE__)
-+ #if defined (__IS_HOST__)
-+ clear_bit (AMAZON_SE_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
-+ #elif defined (__IS_DEVICE__)
-+ set_bit (AMAZON_SE_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
-+ #endif
-+ #endif //defined(__IS_AMAZON_SE__)
-+
-+ #if defined(__IS_AR9__)
-+ if(_core_if->core_no==0)
-+ {
-+ #if defined (__IS_HOST__)
-+ clear_bit (AR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)AR9_RCU_USB1CFG);
-+ #elif defined (__IS_DEVICE__)
-+ set_bit (AR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)AR9_RCU_USB1CFG);
-+ #endif
-+ }
-+ else
-+ {
-+ #if defined (__IS_HOST__)
-+ clear_bit (AR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)AR9_RCU_USB2CFG);
-+ #elif defined (__IS_DEVICE__)
-+ set_bit (AR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)AR9_RCU_USB2CFG);
-+ #endif
-+ }
-+ #endif //defined(__IS_AR9__)
-+
-+ #if defined(__IS_VR9__)
-+ if(_core_if->core_no==0)
-+ {
-+ #if defined (__IS_HOST__)
-+ clear_bit (VR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)VR9_RCU_USB1CFG);
-+ #elif defined (__IS_DEVICE__)
-+ set_bit (VR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)VR9_RCU_USB1CFG);
-+ #endif
-+ }
-+ else
-+ {
-+ #if defined (__IS_HOST__)
-+ clear_bit (VR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)VR9_RCU_USB2CFG);
-+ #elif defined (__IS_DEVICE__)
-+ set_bit (VR9_USBCFG_HDSEL_BIT, (volatile unsigned long *)VR9_RCU_USB2CFG);
-+ #endif
-+ }
-+ #endif //defined(__IS_VR9__)
-+
-+
-+ // set the HC's byte-order to big-endian
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ set_bit (DANUBE_USBCFG_HOST_END_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
-+ clear_bit (DANUBE_USBCFG_SLV_END_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ #if defined(__IS_AMAZON_SE__)
-+ set_bit (AMAZON_SE_USBCFG_HOST_END_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
-+ clear_bit (AMAZON_SE_USBCFG_SLV_END_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
-+ #endif //defined(__IS_AMAZON_SE__)
-+ #if defined(__IS_AR9__)
-+ if(_core_if->core_no==0)
-+ {
-+ set_bit (AR9_USBCFG_HOST_END_BIT, (volatile unsigned long *)AR9_RCU_USB1CFG);
-+ clear_bit (AR9_USBCFG_SLV_END_BIT, (volatile unsigned long *)AR9_RCU_USB1CFG);
-+ }
-+ else
-+ {
-+ set_bit (AR9_USBCFG_HOST_END_BIT, (volatile unsigned long *)AR9_RCU_USB2CFG);
-+ clear_bit (AR9_USBCFG_SLV_END_BIT, (volatile unsigned long *)AR9_RCU_USB2CFG);
-+ }
-+ #endif //defined(__IS_AR9__)
-+ #if defined(__IS_VR9__)
-+ if(_core_if->core_no==0)
-+ {
-+ set_bit (VR9_USBCFG_HOST_END_BIT, (volatile unsigned long *)VR9_RCU_USB1CFG);
-+ clear_bit (VR9_USBCFG_SLV_END_BIT, (volatile unsigned long *)VR9_RCU_USB1CFG);
-+ }
-+ else
-+ {
-+ set_bit (VR9_USBCFG_HOST_END_BIT, (volatile unsigned long *)VR9_RCU_USB2CFG);
-+ clear_bit (VR9_USBCFG_SLV_END_BIT, (volatile unsigned long *)VR9_RCU_USB2CFG);
-+ }
-+ #endif //defined(__IS_VR9__)
-+
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ set_bit (4, DANUBE_RCU_RESET);
-+ MDELAY(500);
-+ clear_bit (4, DANUBE_RCU_RESET);
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+
-+ #if defined(__IS_AMAZON_SE__)
-+ set_bit (4, AMAZON_SE_RCU_RESET);
-+ MDELAY(500);
-+ clear_bit (4, AMAZON_SE_RCU_RESET);
-+ MDELAY(500);
-+ #endif //defined(__IS_AMAZON_SE__)
-+
-+ #if defined(__IS_AR9__)
-+ if(_core_if->core_no==0)
-+ {
-+ set_bit (4, AR9_RCU_USBRESET);
-+ MDELAY(500);
-+ clear_bit (4, AR9_RCU_USBRESET);
-+ }
-+ else
-+ {
-+ set_bit (28, AR9_RCU_USBRESET);
-+ MDELAY(500);
-+ clear_bit (28, AR9_RCU_USBRESET);
-+ }
-+ MDELAY(500);
-+ #endif //defined(__IS_AR9__)
-+ #if defined(__IS_VR9__)
-+ if(!already_hard_reset)
-+ {
-+ set_bit (4, VR9_RCU_USBRESET);
-+ MDELAY(500);
-+ clear_bit (4, VR9_RCU_USBRESET);
-+ MDELAY(500);
-+ already_hard_reset=1;
-+ }
-+ #endif //defined(__IS_VR9__)
-+
-+ #if defined(__IS_TWINPASS__)
-+ ifxusb_enable_afe_oc();
-+ #endif
-+
-+ if(_core_if->core_global_regs)
-+ {
-+ // PHY configurations.
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ #if defined(__IS_AMAZON_SE__)
-+ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_AMAZON_SE__)
-+ #if defined(__IS_AR9__)
-+ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_AR9__)
-+ #if defined(__IS_VR9__)
-+ // ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_VR9__)
-+ }
-+ #else //defined(__UEIP__)
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ #if defined (__IS_HOST__)
-+ clear_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
-+ #elif defined (__IS_DEVICE__)
-+ set_bit (DANUBE_USBCFG_HDSEL_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
-+ #endif
-+ #endif //defined(__IS_AMAZON_SE__)
-+
-+ #if defined(__IS_AMAZON_SE__)
-+ #if defined (__IS_HOST__)
-+ clear_bit (AMAZON_SE_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
-+ #elif defined (__IS_DEVICE__)
-+ set_bit (AMAZON_SE_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
-+ #endif
-+ #endif //defined(__IS_AMAZON_SE__)
-+
-+ #if defined(__IS_AR9__)
-+ if(_core_if->core_no==0)
-+ {
-+ #if defined (__IS_HOST__)
-+ clear_bit (AMAZON_S_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB1CFG);
-+ #elif defined (__IS_DEVICE__)
-+ set_bit (AMAZON_S_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB1CFG);
-+ #endif
-+ }
-+ else
-+ {
-+ #if defined (__IS_HOST__)
-+ clear_bit (AMAZON_S_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB2CFG);
-+ #elif defined (__IS_DEVICE__)
-+ set_bit (AMAZON_S_USBCFG_HDSEL_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB2CFG);
-+ #endif
-+ }
-+ #endif //defined(__IS_AR9__)
-+
-+ // set the HC's byte-order to big-endian
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ set_bit (DANUBE_USBCFG_HOST_END_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
-+ clear_bit (DANUBE_USBCFG_SLV_END_BIT, (volatile unsigned long *)DANUBE_RCU_USBCFG);
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ #if defined(__IS_AMAZON_SE__)
-+ set_bit (AMAZON_SE_USBCFG_HOST_END_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
-+ clear_bit (AMAZON_SE_USBCFG_SLV_END_BIT, (volatile unsigned long *)AMAZON_SE_RCU_USBCFG);
-+ #endif //defined(__IS_AMAZON_SE__)
-+ #if defined(__IS_AR9__)
-+ if(_core_if->core_no==0)
-+ {
-+ set_bit (AMAZON_S_USBCFG_HOST_END_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB1CFG);
-+ clear_bit (AMAZON_S_USBCFG_SLV_END_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB1CFG);
-+ }
-+ else
-+ {
-+ set_bit (AMAZON_S_USBCFG_HOST_END_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB2CFG);
-+ clear_bit (AMAZON_S_USBCFG_SLV_END_BIT, (volatile unsigned long *)AMAZON_S_RCU_USB2CFG);
-+ }
-+ #endif //defined(__IS_AR9__)
-+
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ set_bit (4, DANUBE_RCU_RESET);
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ #if defined(__IS_AMAZON_SE__)
-+ set_bit (4, AMAZON_SE_RCU_RESET);
-+ #endif //defined(__IS_AMAZON_SE__)
-+ #if defined(__IS_AR9__)
-+ if(_core_if->core_no==0)
-+ {
-+ set_bit (4, AMAZON_S_RCU_USBRESET);
-+ }
-+ else
-+ {
-+ set_bit (28, AMAZON_S_RCU_USBRESET);
-+ }
-+ #endif //defined(__IS_AR9__)
-+
-+ MDELAY(500);
-+
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ clear_bit (4, DANUBE_RCU_RESET);
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ #if defined(__IS_AMAZON_SE__)
-+ clear_bit (4, AMAZON_SE_RCU_RESET);
-+ #endif //defined(__IS_AMAZON_SE__)
-+ #if defined(__IS_AR9__)
-+ if(_core_if->core_no==0)
-+ {
-+ clear_bit (4, AMAZON_S_RCU_USBRESET);
-+ }
-+ else
-+ {
-+ clear_bit (28, AMAZON_S_RCU_USBRESET);
-+ }
-+ #endif //defined(__IS_AR9__)
-+
-+ MDELAY(500);
-+
-+ #if defined(__IS_TWINPASS__)
-+ ifxusb_enable_afe_oc();
-+ #endif
-+
-+ if(_core_if->core_global_regs)
-+ {
-+ // PHY configurations.
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ #if defined(__IS_AMAZON_SE__)
-+ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_AMAZON_SE__)
-+ #if defined(__IS_AR9__)
-+ ifxusb_wreg (&_core_if->core_global_regs->guid,0x14014);
-+ #endif //defined(__IS_AR9__)
-+ }
-+ #endif //defined(__UEIP__)
-+}
-+
-+#if defined(__GADGET_LED__) || defined(__HOST_LED__)
-+ #if defined(__UEIP__)
-+ static void *g_usb_led_trigger = NULL;
-+ #endif
-+
-+ void ifxusb_led_init(ifxusb_core_if_t *_core_if)
-+ {
-+ #if defined(__UEIP__)
-+ if ( !g_usb_led_trigger )
-+ {
-+ ifx_led_trigger_register("usb_link", &g_usb_led_trigger);
-+ if ( g_usb_led_trigger != NULL )
-+ {
-+ struct ifx_led_trigger_attrib attrib = {0};
-+ attrib.delay_on = 250;
-+ attrib.delay_off = 250;
-+ attrib.timeout = 2000;
-+ attrib.def_value = 1;
-+ attrib.flags = IFX_LED_TRIGGER_ATTRIB_DELAY_ON | IFX_LED_TRIGGER_ATTRIB_DELAY_OFF | IFX_LED_TRIGGER_ATTRIB_TIMEOUT | IFX_LED_TRIGGER_ATTRIB_DEF_VALUE;
-+ IFX_DEBUGP("Reg USB LED!!\n");
-+ ifx_led_trigger_set_attrib(g_usb_led_trigger, &attrib);
-+ }
-+ }
-+ #endif //defined(__UEIP__)
-+ }
-+
-+ void ifxusb_led_free(ifxusb_core_if_t *_core_if)
-+ {
-+ #if defined(__UEIP__)
-+ if ( g_usb_led_trigger )
-+ {
-+ ifx_led_trigger_deregister(g_usb_led_trigger);
-+ g_usb_led_trigger = NULL;
-+ }
-+ #endif //defined(__UEIP__)
-+ }
-+
-+ /*!
-+ \brief Turn off the USB 5V VBus Power
-+ \param _core_if Pointer of core_if structure
-+ */
-+ void ifxusb_led(ifxusb_core_if_t *_core_if)
-+ {
-+ #if defined(__UEIP__)
-+ if(g_usb_led_trigger)
-+ ifx_led_trigger_activate(g_usb_led_trigger);
-+ #else
-+ #endif //defined(__UEIP__)
-+ }
-+#endif // defined(__GADGET_LED__) || defined(__HOST_LED__)
-+
-+
-+
-+#if defined(__IS_HOST__) && defined(__DO_OC_INT__) && defined(__DO_OC_INT_ENABLE__)
-+/*!
-+ \brief Turn on the OC Int
-+ */
-+ void ifxusb_oc_int_on()
-+ {
-+ #if defined(__UEIP__)
-+ #else
-+ #if defined(__IS_TWINPASS__)
-+ irq_enable(DANUBE_USB_OC_INT);
-+ #endif
-+ #endif //defined(__UEIP__)
-+ }
-+/*!
-+ \brief Turn off the OC Int
-+ */
-+ void ifxusb_oc_int_off()
-+ {
-+ #if defined(__UEIP__)
-+ #else
-+ #if defined(__IS_TWINPASS__)
-+ irq_disable(DANUBE_USB_OC_INT);
-+ #endif
-+ #endif //defined(__UEIP__)
-+ }
-+#endif //defined(__IS_HOST__) && defined(__DO_OC_INT__) && defined(__DO_OC_INT_ENABLE__)
-+
-+/* internal routines for debugging */
-+void ifxusb_dump_msg(const u8 *buf, unsigned int length)
-+{
-+#ifdef __DEBUG__
-+ unsigned int start, num, i;
-+ char line[52], *p;
-+
-+ if (length >= 512)
-+ return;
-+ start = 0;
-+ while (length > 0)
-+ {
-+ num = min(length, 16u);
-+ p = line;
-+ for (i = 0; i < num; ++i)
-+ {
-+ if (i == 8)
-+ *p++ = ' ';
-+ sprintf(p, " %02x", buf[i]);
-+ p += 3;
-+ }
-+ *p = 0;
-+ IFX_PRINT( "%6x: %s\n", start, line);
-+ buf += num;
-+ start += num;
-+ length -= num;
-+ }
-+#endif
-+}
-+
-+/* This functions reads the SPRAM and prints its content */
-+void ifxusb_dump_spram(ifxusb_core_if_t *_core_if)
-+{
-+#ifdef __ENABLE_DUMP__
-+ volatile uint8_t *addr, *start_addr, *end_addr;
-+ uint32_t size;
-+ IFX_PRINT("SPRAM Data:\n");
-+ start_addr = (void*)_core_if->core_global_regs;
-+ IFX_PRINT("Base Address: 0x%8X\n", (uint32_t)start_addr);
-+
-+ start_addr = (void*)_core_if->data_fifo_dbg;
-+ IFX_PRINT("Starting Address: 0x%8X\n", (uint32_t)start_addr);
-+
-+ size=_core_if->hwcfg3.b.dfifo_depth;
-+ size<<=2;
-+ size+=0x200;
-+ size&=0x0003FFFC;
-+
-+ end_addr = (void*)_core_if->data_fifo_dbg;
-+ end_addr += size;
-+
-+ for(addr = start_addr; addr < end_addr; addr+=16)
-+ {
-+ IFX_PRINT("0x%8X:\t%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X\n", (uint32_t)addr,
-+ addr[ 0], addr[ 1], addr[ 2], addr[ 3],
-+ addr[ 4], addr[ 5], addr[ 6], addr[ 7],
-+ addr[ 8], addr[ 9], addr[10], addr[11],
-+ addr[12], addr[13], addr[14], addr[15]
-+ );
-+ }
-+ return;
-+#endif //__ENABLE_DUMP__
-+}
-+
-+
-+
-+
-+/* This function reads the core global registers and prints them */
-+void ifxusb_dump_registers(ifxusb_core_if_t *_core_if)
-+{
-+#ifdef __ENABLE_DUMP__
-+ int i;
-+ volatile uint32_t *addr;
-+ #ifdef __IS_DEVICE__
-+ volatile uint32_t *addri,*addro;
-+ #endif
-+
-+ IFX_PRINT("Core Global Registers\n");
-+ addr=&_core_if->core_global_regs->gotgctl;
-+ IFX_PRINT("GOTGCTL @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->core_global_regs->gotgint;
-+ IFX_PRINT("GOTGINT @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->core_global_regs->gahbcfg;
-+ IFX_PRINT("GAHBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->core_global_regs->gusbcfg;
-+ IFX_PRINT("GUSBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->core_global_regs->grstctl;
-+ IFX_PRINT("GRSTCTL @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->core_global_regs->gintsts;
-+ IFX_PRINT("GINTSTS @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->core_global_regs->gintmsk;
-+ IFX_PRINT("GINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->core_global_regs->gi2cctl;
-+ IFX_PRINT("GI2CCTL @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->core_global_regs->gpvndctl;
-+ IFX_PRINT("GPVNDCTL @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->core_global_regs->ggpio;
-+ IFX_PRINT("GGPIO @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->core_global_regs->guid;
-+ IFX_PRINT("GUID @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->core_global_regs->gsnpsid;
-+ IFX_PRINT("GSNPSID @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->core_global_regs->ghwcfg1;
-+ IFX_PRINT("GHWCFG1 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->core_global_regs->ghwcfg2;
-+ IFX_PRINT("GHWCFG2 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->core_global_regs->ghwcfg3;
-+ IFX_PRINT("GHWCFG3 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->core_global_regs->ghwcfg4;
-+ IFX_PRINT("GHWCFG4 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+
-+ addr=_core_if->pcgcctl;
-+ IFX_PRINT("PCGCCTL @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+
-+ addr=&_core_if->core_global_regs->grxfsiz;
-+ IFX_PRINT("GRXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+
-+ #ifdef __IS_HOST__
-+ addr=&_core_if->core_global_regs->gnptxfsiz;
-+ IFX_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->core_global_regs->hptxfsiz;
-+ IFX_PRINT("HPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ #endif //__IS_HOST__
-+
-+ #ifdef __IS_DEVICE__
-+ #ifdef __DED_FIFO__
-+ addr=&_core_if->core_global_regs->gnptxfsiz;
-+ IFX_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ for (i=0; i<= _core_if->hwcfg4.b.num_in_eps; i++)
-+ {
-+ addr=&_core_if->core_global_regs->dptxfsiz_dieptxf[i];
-+ IFX_PRINT("DPTXFSIZ[%d] @0x%08X : 0x%08X\n",i,(uint32_t)addr,ifxusb_rreg(addr));
-+ }
-+ #else
-+ addr=&_core_if->core_global_regs->gnptxfsiz;
-+ IFX_PRINT("TXFSIZ[00] @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ for (i=0; i< _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
-+ {
-+ addr=&_core_if->core_global_regs->dptxfsiz_dieptxf[i];
-+ IFX_PRINT("TXFSIZ[%02d] @0x%08X : 0x%08X\n",i+1,(uint32_t)addr,ifxusb_rreg(addr));
-+ }
-+ #endif
-+ #endif //__IS_DEVICE__
-+
-+ #ifdef __IS_HOST__
-+ IFX_PRINT("Host Global Registers\n");
-+ addr=&_core_if->host_global_regs->hcfg;
-+ IFX_PRINT("HCFG @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->host_global_regs->hfir;
-+ IFX_PRINT("HFIR @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->host_global_regs->hfnum;
-+ IFX_PRINT("HFNUM @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->host_global_regs->hptxsts;
-+ IFX_PRINT("HPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->host_global_regs->haint;
-+ IFX_PRINT("HAINT @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->host_global_regs->haintmsk;
-+ IFX_PRINT("HAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr= _core_if->hprt0;
-+ IFX_PRINT("HPRT0 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+
-+ for (i=0; i<MAX_EPS_CHANNELS; i++)
-+ {
-+ IFX_PRINT("Host Channel %d Specific Registers\n", i);
-+ addr=&_core_if->hc_regs[i]->hcchar;
-+ IFX_PRINT("HCCHAR @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->hc_regs[i]->hcsplt;
-+ IFX_PRINT("HCSPLT @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->hc_regs[i]->hcint;
-+ IFX_PRINT("HCINT @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->hc_regs[i]->hcintmsk;
-+ IFX_PRINT("HCINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->hc_regs[i]->hctsiz;
-+ IFX_PRINT("HCTSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->hc_regs[i]->hcdma;
-+ IFX_PRINT("HCDMA @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ }
-+ #endif //__IS_HOST__
-+
-+ #ifdef __IS_DEVICE__
-+ IFX_PRINT("Device Global Registers\n");
-+ addr=&_core_if->dev_global_regs->dcfg;
-+ IFX_PRINT("DCFG @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->dev_global_regs->dctl;
-+ IFX_PRINT("DCTL @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->dev_global_regs->dsts;
-+ IFX_PRINT("DSTS @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->dev_global_regs->diepmsk;
-+ IFX_PRINT("DIEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->dev_global_regs->doepmsk;
-+ IFX_PRINT("DOEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->dev_global_regs->daintmsk;
-+ IFX_PRINT("DAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->dev_global_regs->daint;
-+ IFX_PRINT("DAINT @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->dev_global_regs->dvbusdis;
-+ IFX_PRINT("DVBUSID @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ addr=&_core_if->dev_global_regs->dvbuspulse;
-+ IFX_PRINT("DVBUSPULSE @0x%08X : 0x%08X\n", (uint32_t)addr,ifxusb_rreg(addr));
-+
-+ addr=&_core_if->dev_global_regs->dtknqr1;
-+ IFX_PRINT("DTKNQR1 @0x%08X : 0x%08X\n",(uint32_t)addr,ifxusb_rreg(addr));
-+ if (_core_if->hwcfg2.b.dev_token_q_depth > 6) {
-+ addr=&_core_if->dev_global_regs->dtknqr2;
-+ IFX_PRINT("DTKNQR2 @0x%08X : 0x%08X\n", (uint32_t)addr,ifxusb_rreg(addr));
-+ }
-+
-+ if (_core_if->hwcfg2.b.dev_token_q_depth > 14)
-+ {
-+ addr=&_core_if->dev_global_regs->dtknqr3_dthrctl;
-+ IFX_PRINT("DTKNQR3_DTHRCTL @0x%08X : 0x%08X\n", (uint32_t)addr, ifxusb_rreg(addr));
-+ }
-+
-+ if (_core_if->hwcfg2.b.dev_token_q_depth > 22)
-+ {
-+ addr=&_core_if->dev_global_regs->dtknqr4_fifoemptymsk;
-+ IFX_PRINT("DTKNQR4 @0x%08X : 0x%08X\n", (uint32_t)addr, ifxusb_rreg(addr));
-+ }
-+
-+ //for (i=0; i<= MAX_EPS_CHANNELS; i++)
-+ //for (i=0; i<= 10; i++)
-+ for (i=0; i<= 3; i++)
-+ {
-+ IFX_PRINT("Device EP %d Registers\n", i);
-+ addri=&_core_if->in_ep_regs[i]->diepctl;addro=&_core_if->out_ep_regs[i]->doepctl;
-+ IFX_PRINT("DEPCTL I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro));
-+ addro=&_core_if->out_ep_regs[i]->doepfn;
-+ IFX_PRINT("DEPFN I: O: 0x%08X\n",ifxusb_rreg(addro));
-+ addri=&_core_if->in_ep_regs[i]->diepint;addro=&_core_if->out_ep_regs[i]->doepint;
-+ IFX_PRINT("DEPINT I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro));
-+ addri=&_core_if->in_ep_regs[i]->dieptsiz;addro=&_core_if->out_ep_regs[i]->doeptsiz;
-+ IFX_PRINT("DETSIZ I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro));
-+ addri=&_core_if->in_ep_regs[i]->diepdma;addro=&_core_if->out_ep_regs[i]->doepdma;
-+ IFX_PRINT("DEPDMA I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro));
-+ addri=&_core_if->in_ep_regs[i]->dtxfsts;
-+ IFX_PRINT("DTXFSTS I: 0x%08X\n",ifxusb_rreg(addri) );
-+ addri=&_core_if->in_ep_regs[i]->diepdmab;addro=&_core_if->out_ep_regs[i]->doepdmab;
-+ IFX_PRINT("DEPDMAB I: 0x%08X O: 0x%08X\n",ifxusb_rreg(addri),ifxusb_rreg(addro));
-+ }
-+ #endif //__IS_DEVICE__
-+#endif //__ENABLE_DUMP__
-+}
-+
-+void ifxusb_clean_spram(ifxusb_core_if_t *_core_if,uint32_t dwords)
-+{
-+ volatile uint32_t *addr1,*addr2, *start_addr, *end_addr;
-+
-+ if(!dwords)
-+ return;
-+
-+ start_addr = (uint32_t *)_core_if->data_fifo_dbg;
-+
-+ end_addr = (uint32_t *)_core_if->data_fifo_dbg;
-+ end_addr += dwords;
-+
-+ IFX_PRINT("Clearning SPRAM: 0x%8X-0x%8X\n", (uint32_t)start_addr,(uint32_t)end_addr);
-+ for(addr1 = start_addr; addr1 < end_addr; addr1+=4)
-+ {
-+ for(addr2 = addr1; addr2 < addr1+4; addr2++)
-+ *addr2=0x00000000;
-+ }
-+ IFX_PRINT("Clearning SPRAM: 0x%8X-0x%8X Done\n", (uint32_t)start_addr,(uint32_t)end_addr);
-+ return;
-+}
-+
---- /dev/null
-+++ b/drivers/usb/ifxhcd/ifxusb_cif.h
-@@ -0,0 +1,665 @@
-+/*****************************************************************************
-+ ** FILE NAME : ifxusb_cif.h
-+ ** PROJECT : IFX USB sub-system V3
-+ ** MODULES : IFX USB sub-system Host and Device driver
-+ ** SRC VERSION : 1.0
-+ ** DATE : 1/Jan/2009
-+ ** AUTHOR : Chen, Howard
-+ ** DESCRIPTION : The Core Interface provides basic services for accessing and
-+ ** managing the IFX USB hardware. These services are used by both the
-+ ** Host Controller Driver and the Peripheral Controller Driver.
-+ ** FUNCTIONS :
-+ ** COMPILER : gcc
-+ ** REFERENCE : IFX hardware ref handbook for each plateforms
-+ ** COPYRIGHT :
-+ ** Version Control Section **
-+ ** $Author$
-+ ** $Date$
-+ ** $Revisions$
-+ ** $Log$ Revision history
-+*****************************************************************************/
-+
-+/*!
-+ \defgroup IFXUSB_DRIVER_V3 IFX USB SS Project
-+ \brief IFX USB subsystem V3.x
-+ */
-+
-+/*!
-+ \defgroup IFXUSB_CIF Core Interface APIs
-+ \ingroup IFXUSB_DRIVER_V3
-+ \brief The Core Interface provides basic services for accessing and
-+ managing the IFXUSB hardware. These services are used by both the
-+ Host Controller Driver and the Peripheral Controller Driver.
-+ */
-+
-+
-+/*!
-+ \file ifxusb_cif.h
-+ \ingroup IFXUSB_DRIVER_V3
-+ \brief This file contains the interface to the IFX USB Core.
-+ */
-+
-+#if !defined(__IFXUSB_CIF_H__)
-+#define __IFXUSB_CIF_H__
-+
-+#include <linux/workqueue.h>
-+
-+#include <linux/version.h>
-+#include <asm/param.h>
-+
-+#include "ifxusb_plat.h"
-+#include "ifxusb_regs.h"
-+
-+#ifdef __DEBUG__
-+ #include "linux/timer.h"
-+#endif
-+
-+///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+#define IFXUSB_PARAM_SPEED_HIGH 0
-+#define IFXUSB_PARAM_SPEED_FULL 1
-+
-+#define IFXUSB_EP_SPEED_LOW 0
-+#define IFXUSB_EP_SPEED_FULL 1
-+#define IFXUSB_EP_SPEED_HIGH 2
-+
-+#define IFXUSB_EP_TYPE_CTRL 0
-+#define IFXUSB_EP_TYPE_ISOC 1
-+#define IFXUSB_EP_TYPE_BULK 2
-+#define IFXUSB_EP_TYPE_INTR 3
-+
-+#define IFXUSB_HC_PID_DATA0 0
-+#define IFXUSB_HC_PID_DATA2 1
-+#define IFXUSB_HC_PID_DATA1 2
-+#define IFXUSB_HC_PID_MDATA 3
-+#define IFXUSB_HC_PID_SETUP 3
-+
-+
-+/*!
-+ \addtogroup IFXUSB_CIF
-+ */
-+/*@{*/
-+
-+/*!
-+ \struct ifxusb_params
-+ \brief IFXUSB Parameters structure.
-+ This structure is used for both importing from insmod stage and run-time storage.
-+ These parameters define how the IFXUSB controller should be configured.
-+ */
-+typedef struct ifxusb_params
-+{
-+ int32_t dma_burst_size; /*!< The DMA Burst size (applicable only for Internal DMA
-+ Mode). 0(for single), 1(incr), 4(incr4), 8(incr8) 16(incr16)
-+ */
-+ /* Translate this to GAHBCFG values */
-+ int32_t speed; /*!< Specifies the maximum speed of operation in host and device mode.
-+ The actual speed depends on the speed of the attached device and
-+ the value of phy_type. The actual speed depends on the speed of the
-+ attached device.
-+ 0 - High Speed (default)
-+ 1 - Full Speed
-+ */
-+
-+ int32_t data_fifo_size; /*!< Total number of dwords in the data FIFO memory. This
-+ memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic
-+ Tx FIFOs.
-+ 32 to 32768
-+ */
-+ #ifdef __IS_DEVICE__
-+ int32_t rx_fifo_size; /*!< Number of dwords in the Rx FIFO in device mode.
-+ 16 to 32768
-+ */
-+
-+
-+ int32_t tx_fifo_size[MAX_EPS_CHANNELS]; /*!< Number of dwords in each of the Tx FIFOs in device mode.
-+ 4 to 768
-+ */
-+ #ifdef __DED_FIFO__
-+ int32_t thr_ctl; /*!< Threshold control on/off */
-+ int32_t tx_thr_length; /*!< Threshold length for Tx */
-+ int32_t rx_thr_length; /*!< Threshold length for Rx*/
-+ #endif
-+ #else //__IS_HOST__
-+ int32_t host_channels; /*!< The number of host channel registers to use.
-+ 1 to 16
-+ */
-+
-+ int32_t rx_fifo_size; /*!< Number of dwords in the Rx FIFO in host mode.
-+ 16 to 32768
-+ */
-+
-+ int32_t nperio_tx_fifo_size;/*!< Number of dwords in the non-periodic Tx FIFO in host mode.
-+ 16 to 32768
-+ */
-+
-+ int32_t perio_tx_fifo_size; /*!< Number of dwords in the host periodic Tx FIFO.
-+ 16 to 32768
-+ */
-+ #endif //__IS_HOST__
-+
-+ int32_t max_transfer_size; /*!< The maximum transfer size supported in bytes.
-+ 2047 to 65,535
-+ */
-+
-+ int32_t max_packet_count; /*!< The maximum number of packets in a transfer.
-+ 15 to 511 (default 511)
-+ */
-+ int32_t phy_utmi_width; /*!< Specifies the UTMI+ Data Width.
-+ 8 or 16 bits (default 16)
-+ */
-+
-+ int32_t turn_around_time_hs; /*!< Specifies the Turn-Around time at HS*/
-+ int32_t turn_around_time_fs; /*!< Specifies the Turn-Around time at FS*/
-+
-+ int32_t timeout_cal_hs; /*!< Specifies the Timeout_Calibration at HS*/
-+ int32_t timeout_cal_fs; /*!< Specifies the Timeout_Calibration at FS*/
-+} ifxusb_params_t;
-+
-+///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+/*!
-+ \struct ifxusb_core_if
-+ \brief The ifx_core_if structure contains information needed to manage
-+ the IFX USB controller acting in either host or device mode. It
-+ represents the programming view of the controller as a whole.
-+ */
-+typedef struct ifxusb_core_if
-+{
-+ ifxusb_params_t params; /*!< Run-time Parameters */
-+
-+ uint8_t core_no; /*!< core number (used as id when multi-core case */
-+ char *core_name; /*!< core name used for registration and informative purpose*/
-+ int irq; /*!< irq number this core is hooked */
-+
-+ /*****************************************************************
-+ * Structures and pointers to physical register interface.
-+ *****************************************************************/
-+ /** Core Global registers starting at offset 000h. */
-+ ifxusb_core_global_regs_t *core_global_regs; /*!< pointer to Core Global Registers, offset at 000h */
-+
-+ /** Host-specific registers */
-+ #ifdef __IS_HOST__
-+ /** Host Global Registers starting at offset 400h.*/
-+ ifxusb_host_global_regs_t *host_global_regs; /*!< pointer to Host Global Registers, offset at 400h */
-+ #define IFXUSB_HOST_GLOBAL_REG_OFFSET 0x400
-+ /** Host Port 0 Control and Status Register */
-+ volatile uint32_t *hprt0; /*!< pointer to HPRT0 Registers, offset at 440h */
-+ #define IFXUSB_HOST_PORT_REGS_OFFSET 0x440
-+ /** Host Channel Specific Registers at offsets 500h-5FCh. */
-+ ifxusb_hc_regs_t *hc_regs[MAX_EPS_CHANNELS]; /*!< pointer to Host-Channel n Registers, offset at 500h */
-+ #define IFXUSB_HOST_CHAN_REGS_OFFSET 0x500
-+ #define IFXUSB_CHAN_REGS_OFFSET 0x20
-+ #endif
-+
-+ /** Device-specific registers */
-+ #ifdef __IS_DEVICE__
-+ /** Device Global Registers starting at offset 800h */
-+ ifxusb_device_global_regs_t *dev_global_regs; /*!< pointer to Device Global Registers, offset at 800h */
-+ #define IFXUSB_DEV_GLOBAL_REG_OFFSET 0x800
-+
-+ /** Device Logical IN Endpoint-Specific Registers 900h-AFCh */
-+ ifxusb_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS]; /*!< pointer to Device IN-EP Registers, offset at 900h */
-+ #define IFXUSB_DEV_IN_EP_REG_OFFSET 0x900
-+ #define IFXUSB_EP_REG_OFFSET 0x20
-+ /** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */
-+ ifxusb_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS];/*!< pointer to Device OUT-EP Registers, offset at 900h */
-+ #define IFXUSB_DEV_OUT_EP_REG_OFFSET 0xB00
-+ #endif
-+
-+ /** Power and Clock Gating Control Register */
-+ volatile uint32_t *pcgcctl; /*!< pointer to Power and Clock Gating Control Registers, offset at E00h */
-+ #define IFXUSB_PCGCCTL_OFFSET 0xE00
-+
-+ /** Push/pop addresses for endpoints or host channels.*/
-+ uint32_t *data_fifo[MAX_EPS_CHANNELS]; /*!< pointer to FIFO access windows, offset at 1000h */
-+ #define IFXUSB_DATA_FIFO_OFFSET 0x1000
-+ #define IFXUSB_DATA_FIFO_SIZE 0x1000
-+
-+ uint32_t *data_fifo_dbg; /*!< pointer to FIFO debug windows, offset at 1000h */
-+
-+ /** Hardware Configuration -- stored here for convenience.*/
-+ hwcfg1_data_t hwcfg1; /*!< preserved Hardware Configuration 1 */
-+ hwcfg2_data_t hwcfg2; /*!< preserved Hardware Configuration 2 */
-+ hwcfg3_data_t hwcfg3; /*!< preserved Hardware Configuration 3 */
-+ hwcfg4_data_t hwcfg4; /*!< preserved Hardware Configuration 3 */
-+ uint32_t snpsid; /*!< preserved SNPSID */
-+
-+ /*****************************************************************
-+ * Run-time informations.
-+ *****************************************************************/
-+ /* Set to 1 if the core PHY interface bits in USBCFG have been initialized. */
-+ uint8_t phy_init_done; /*!< indicated PHY is initialized. */
-+
-+ #ifdef __IS_HOST__
-+ uint8_t queuing_high_bandwidth; /*!< Host mode, Queueing High Bandwidth. */
-+ #endif
-+} ifxusb_core_if_t;
-+
-+/*@}*//*IFXUSB_CIF*/
-+
-+
-+/*!
-+ \fn void *ifxusb_alloc_buf(size_t size, int clear)
-+ \brief This function is called to allocate buffer of specified size.
-+ The allocated buffer is mapped into DMA accessable address.
-+ \param size Size in BYTE to be allocated
-+ \param clear 0: don't do clear after buffer allocated, other: do clear to zero
-+ \return 0/NULL: Fail; uncached pointer of allocated buffer
-+ \ingroup IFXUSB_CIF
-+ */
-+extern void *ifxusb_alloc_buf(size_t size, int clear);
-+
-+/*!
-+ \fn void ifxusb_free_buf(void *vaddr)
-+ \brief This function is called to free allocated buffer.
-+ \param vaddr the uncached pointer of the buffer
-+ \ingroup IFXUSB_CIF
-+ */
-+extern void ifxusb_free_buf(void *vaddr);
-+
-+/*!
-+ \fn int ifxusb_core_if_init(ifxusb_core_if_t *_core_if,
-+ int _irq,
-+ uint32_t _reg_base_addr,
-+ uint32_t _fifo_base_addr,
-+ uint32_t _fifo_dbg_addr)
-+ \brief This function is called to initialize the IFXUSB CSR data
-+ structures. The register addresses in the device and host
-+ structures are initialized from the base address supplied by the
-+ caller. The calling function must make the OS calls to get the
-+ base address of the IFXUSB controller registers.
-+ \param _core_if Pointer of core_if structure
-+ \param _irq irq number
-+ \param _reg_base_addr Base address of IFXUSB core registers
-+ \param _fifo_base_addr Fifo base address
-+ \param _fifo_dbg_addr Fifo debug address
-+ \return 0: success;
-+ \ingroup IFXUSB_CIF
-+ */
-+extern int ifxusb_core_if_init(ifxusb_core_if_t *_core_if,
-+ int _irq,
-+ uint32_t _reg_base_addr,
-+ uint32_t _fifo_base_addr,
-+ uint32_t _fifo_dbg_addr);
-+
-+
-+/*!
-+ \fn void ifxusb_core_if_remove(ifxusb_core_if_t *_core_if)
-+ \brief This function free the mapped address in the IFXUSB CSR data structures.
-+ \param _core_if Pointer of core_if structure
-+ \ingroup IFXUSB_CIF
-+ */
-+extern void ifxusb_core_if_remove(ifxusb_core_if_t *_core_if);
-+
-+/*!
-+ \fn void ifxusb_enable_global_interrupts( ifxusb_core_if_t *_core_if )
-+ \brief This function enbles the controller's Global Interrupt in the AHB Config register.
-+ \param _core_if Pointer of core_if structure
-+ */
-+extern void ifxusb_enable_global_interrupts( ifxusb_core_if_t *_core_if );
-+
-+/*!
-+ \fn void ifxusb_disable_global_interrupts( ifxusb_core_if_t *_core_if )
-+ \brief This function disables the controller's Global Interrupt in the AHB Config register.
-+ \param _core_if Pointer of core_if structure
-+ \ingroup IFXUSB_CIF
-+ */
-+extern void ifxusb_disable_global_interrupts( ifxusb_core_if_t *_core_if );
-+
-+/*!
-+ \fn void ifxusb_flush_tx_fifo( ifxusb_core_if_t *_core_if, const int _num )
-+ \brief Flush a Tx FIFO.
-+ \param _core_if Pointer of core_if structure
-+ \param _num Tx FIFO to flush. ( 0x10 for ALL TX FIFO )
-+ \ingroup IFXUSB_CIF
-+ */
-+extern void ifxusb_flush_tx_fifo( ifxusb_core_if_t *_core_if, const int _num );
-+
-+/*!
-+ \fn void ifxusb_flush_rx_fifo( ifxusb_core_if_t *_core_if )
-+ \brief Flush Rx FIFO.
-+ \param _core_if Pointer of core_if structure
-+ \ingroup IFXUSB_CIF
-+ */
-+extern void ifxusb_flush_rx_fifo( ifxusb_core_if_t *_core_if );
-+
-+/*!
-+ \fn void ifxusb_flush_both_fifo( ifxusb_core_if_t *_core_if )
-+ \brief Flush ALL Rx and Tx FIFO.
-+ \param _core_if Pointer of core_if structure
-+ \ingroup IFXUSB_CIF
-+ */
-+extern void ifxusb_flush_both_fifo( ifxusb_core_if_t *_core_if );
-+
-+
-+/*!
-+ \fn int ifxusb_core_soft_reset(ifxusb_core_if_t *_core_if)
-+ \brief Do core a soft reset of the core. Be careful with this because it
-+ resets all the internal state machines of the core.
-+ \param _core_if Pointer of core_if structure
-+ \ingroup IFXUSB_CIF
-+ */
-+extern int ifxusb_core_soft_reset(ifxusb_core_if_t *_core_if);
-+
-+
-+/*!
-+ \brief Turn on the USB Core Power
-+ \param _core_if Pointer of core_if structure
-+ \ingroup IFXUSB_CIF
-+*/
-+extern void ifxusb_power_on (ifxusb_core_if_t *_core_if);
-+
-+/*!
-+ \fn void ifxusb_power_off (ifxusb_core_if_t *_core_if)
-+ \brief Turn off the USB Core Power
-+ \param _core_if Pointer of core_if structure
-+ \ingroup IFXUSB_CIF
-+*/
-+extern void ifxusb_power_off (ifxusb_core_if_t *_core_if);
-+
-+/*!
-+ \fn void ifxusb_phy_power_on (ifxusb_core_if_t *_core_if)
-+ \brief Turn on the USB PHY Power
-+ \param _core_if Pointer of core_if structure
-+ \ingroup IFXUSB_CIF
-+*/
-+extern void ifxusb_phy_power_on (ifxusb_core_if_t *_core_if);
-+
-+/*!
-+ \fn void ifxusb_phy_power_off (ifxusb_core_if_t *_core_if)
-+ \brief Turn off the USB PHY Power
-+ \param _core_if Pointer of core_if structure
-+ \ingroup IFXUSB_CIF
-+*/
-+extern void ifxusb_phy_power_off (ifxusb_core_if_t *_core_if);
-+
-+/*!
-+ \fn void ifxusb_hard_reset(ifxusb_core_if_t *_core_if)
-+ \brief Reset on the USB Core RCU
-+ \param _core_if Pointer of core_if structure
-+ \ingroup IFXUSB_CIF
-+ */
-+extern void ifxusb_hard_reset(ifxusb_core_if_t *_core_if);
-+
-+///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+
-+#ifdef __IS_HOST__
-+ /*!
-+ \fn void ifxusb_host_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t *_params)
-+ \brief This function initializes the IFXUSB controller registers for Host mode.
-+ This function flushes the Tx and Rx FIFOs and it flushes any entries in the
-+ request queues.
-+ \param _core_if Pointer of core_if structure
-+ \param _params parameters to be set
-+ \ingroup IFXUSB_CIF
-+ */
-+ extern void ifxusb_host_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t *_params);
-+
-+ /*!
-+ \fn void ifxusb_host_enable_interrupts(ifxusb_core_if_t *_core_if)
-+ \brief This function enables the Host mode interrupts.
-+ \param _core_if Pointer of core_if structure
-+ \ingroup IFXUSB_CIF
-+ */
-+ extern void ifxusb_host_enable_interrupts(ifxusb_core_if_t *_core_if);
-+
-+ /*!
-+ \fn void ifxusb_host_disable_interrupts(ifxusb_core_if_t *_core_if)
-+ \brief This function disables the Host mode interrupts.
-+ \param _core_if Pointer of core_if structure
-+ \ingroup IFXUSB_CIF
-+ */
-+ extern void ifxusb_host_disable_interrupts(ifxusb_core_if_t *_core_if);
-+
-+ #if defined(__IS_TWINPASS__)
-+ extern void ifxusb_enable_afe_oc(void);
-+ #endif
-+
-+ /*!
-+ \fn void ifxusb_vbus_init(ifxusb_core_if_t *_core_if)
-+ \brief This function init the VBUS control.
-+ \param _core_if Pointer of core_if structure
-+ \ingroup IFXUSB_CIF
-+ */
-+ extern void ifxusb_vbus_init(ifxusb_core_if_t *_core_if);
-+
-+ /*!
-+ \fn void ifxusb_vbus_free(ifxusb_core_if_t *_core_if)
-+ \brief This function free the VBUS control.
-+ \param _core_if Pointer of core_if structure
-+ \ingroup IFXUSB_CIF
-+ */
-+ extern void ifxusb_vbus_free(ifxusb_core_if_t *_core_if);
-+
-+ /*!
-+ \fn void ifxusb_vbus_on(ifxusb_core_if_t *_core_if)
-+ \brief Turn on the USB 5V VBus Power
-+ \param _core_if Pointer of core_if structure
-+ \ingroup IFXUSB_CIF
-+ */
-+ extern void ifxusb_vbus_on(ifxusb_core_if_t *_core_if);
-+
-+ /*!
-+ \fn void ifxusb_vbus_off(ifxusb_core_if_t *_core_if)
-+ \brief Turn off the USB 5V VBus Power
-+ \param _core_if Pointer of core_if structure
-+ \ingroup IFXUSB_CIF
-+ */
-+ extern void ifxusb_vbus_off(ifxusb_core_if_t *_core_if);
-+
-+ /*!
-+ \fn int ifxusb_vbus(ifxusb_core_if_t *_core_if)
-+ \brief Read Current VBus status
-+ \param _core_if Pointer of core_if structure
-+ \ingroup IFXUSB_CIF
-+ */
-+ extern int ifxusb_vbus(ifxusb_core_if_t *_core_if);
-+
-+ #if defined(__DO_OC_INT__) && defined(__DO_OC_INT_ENABLE__)
-+ /*!
-+ \fn void ifxusb_oc_int_on(void)
-+ \brief Turn on the OC interrupt
-+ \ingroup IFXUSB_CIF
-+ */
-+ extern void ifxusb_oc_int_on(void);
-+
-+ /*!
-+ \fn void ifxusb_oc_int_off(void)
-+ \brief Turn off the OC interrupt
-+ \ingroup IFXUSB_CIF
-+ */
-+ extern void ifxusb_oc_int_off(void);
-+ #endif //defined(__DO_OC_INT__) && defined(__DO_OC_INT_ENABLE__)
-+#endif
-+
-+///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+
-+#ifdef __IS_DEVICE__
-+ /*!
-+ \fn void ifxusb_dev_enable_interrupts(ifxusb_core_if_t *_core_if)
-+ \brief This function enables the Device mode interrupts.
-+ \param _core_if Pointer of core_if structure
-+ \ingroup IFXUSB_CIF
-+ */
-+ extern void ifxusb_dev_enable_interrupts(ifxusb_core_if_t *_core_if);
-+
-+ /*!
-+ \fn uint32_t ifxusb_dev_get_frame_number(ifxusb_core_if_t *_core_if)
-+ \brief Gets the current USB frame number. This is the frame number from the last SOF packet.
-+ \param _core_if Pointer of core_if structure
-+ \ingroup IFXUSB_CIF
-+ */
-+ extern uint32_t ifxusb_dev_get_frame_number(ifxusb_core_if_t *_core_if);
-+
-+ /*!
-+ \fn void ifxusb_dev_ep_set_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _is_in)
-+ \brief Set the EP STALL.
-+ \param _core_if Pointer of core_if structure
-+ \param _epno EP number
-+ \param _is_in 1: is IN transfer
-+ \ingroup IFXUSB_CIF
-+ */
-+ extern void ifxusb_dev_ep_set_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _is_in);
-+
-+ /*!
-+ \fn void ifxusb_dev_ep_clear_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _ep_type, uint8_t _is_in)
-+ \brief Set the EP STALL.
-+ \param _core_if Pointer of core_if structure
-+ \param _epno EP number
-+ \param _ep_type EP Type
-+ \ingroup IFXUSB_CIF
-+ */
-+ extern void ifxusb_dev_ep_clear_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _ep_type, uint8_t _is_in);
-+
-+ /*!
-+ \fn void ifxusb_dev_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t *_params)
-+ \brief This function initializes the IFXUSB controller registers for Device mode.
-+ This function flushes the Tx and Rx FIFOs and it flushes any entries in the
-+ request queues.
-+ This function validate the imported parameters and store the result in the CIF structure.
-+ After
-+ \param _core_if Pointer of core_if structure
-+ \param _params structure of inported parameters
-+ \ingroup IFXUSB_CIF
-+ */
-+ extern void ifxusb_dev_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t *_params);
-+#endif
-+
-+///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+#if defined(__GADGET_LED__) || defined(__HOST_LED__)
-+ /*!
-+ \fn void ifxusb_led_init(ifxusb_core_if_t *_core_if)
-+ \brief This function init the LED control.
-+ \param _core_if Pointer of core_if structure
-+ \ingroup IFXUSB_CIF
-+ */
-+ extern void ifxusb_led_init(ifxusb_core_if_t *_core_if);
-+
-+ /*!
-+ \fn void ifxusb_led_free(ifxusb_core_if_t *_core_if)
-+ \brief This function free the LED control.
-+ \param _core_if Pointer of core_if structure
-+ \ingroup IFXUSB_CIF
-+ */
-+ extern void ifxusb_led_free(ifxusb_core_if_t *_core_if);
-+
-+ /*!
-+ \fn void ifxusb_led(ifxusb_core_if_t *_core_if)
-+ \brief This function trigger the LED access.
-+ \param _core_if Pointer of core_if structure
-+ \ingroup IFXUSB_CIF
-+ */
-+ extern void ifxusb_led(ifxusb_core_if_t *_core_if);
-+#endif
-+
-+///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+/* internal routines for debugging */
-+extern void ifxusb_dump_msg(const u8 *buf, unsigned int length);
-+extern void ifxusb_dump_spram(ifxusb_core_if_t *_core_if);
-+extern void ifxusb_dump_registers(ifxusb_core_if_t *_core_if);
-+extern void ifxusb_clean_spram(ifxusb_core_if_t *_core_if,uint32_t dwords);
-+
-+///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+static inline uint32_t ifxusb_read_core_intr(ifxusb_core_if_t *_core_if)
-+{
-+ return (ifxusb_rreg(&_core_if->core_global_regs->gintsts) &
-+ (ifxusb_rreg(&_core_if->core_global_regs->gintmsk)
-+#ifdef __USE_TIMER_4_SOF__
-+ | IFXUSB_SOF_INTR_MASK
-+#endif
-+ ));
-+}
-+
-+static inline uint32_t ifxusb_read_otg_intr (ifxusb_core_if_t *_core_if)
-+{
-+ return (ifxusb_rreg (&_core_if->core_global_regs->gotgint));
-+}
-+
-+static inline uint32_t ifxusb_mode(ifxusb_core_if_t *_core_if)
-+{
-+ return (ifxusb_rreg( &_core_if->core_global_regs->gintsts ) & 0x1);
-+}
-+static inline uint8_t ifxusb_is_device_mode(ifxusb_core_if_t *_core_if)
-+{
-+ return (ifxusb_mode(_core_if) != 1);
-+}
-+static inline uint8_t ifxusb_is_host_mode(ifxusb_core_if_t *_core_if)
-+{
-+ return (ifxusb_mode(_core_if) == 1);
-+}
-+
-+///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+#ifdef __IS_HOST__
-+ static inline uint32_t ifxusb_read_hprt0(ifxusb_core_if_t *_core_if)
-+ {
-+ hprt0_data_t hprt0;
-+ hprt0.d32 = ifxusb_rreg(_core_if->hprt0);
-+ hprt0.b.prtena = 0;
-+ hprt0.b.prtconndet = 0;
-+ hprt0.b.prtenchng = 0;
-+ hprt0.b.prtovrcurrchng = 0;
-+ return hprt0.d32;
-+ }
-+
-+ static inline uint32_t ifxusb_read_host_all_channels_intr (ifxusb_core_if_t *_core_if)
-+ {
-+ return (ifxusb_rreg (&_core_if->host_global_regs->haint));
-+ }
-+
-+ static inline uint32_t ifxusb_read_host_channel_intr (ifxusb_core_if_t *_core_if, int hc_num)
-+ {
-+ return (ifxusb_rreg (&_core_if->hc_regs[hc_num]->hcint));
-+ }
-+#endif
-+
-+#ifdef __IS_DEVICE__
-+ static inline uint32_t ifxusb_read_dev_all_in_ep_intr(ifxusb_core_if_t *_core_if)
-+ {
-+ uint32_t v;
-+ v = ifxusb_rreg(&_core_if->dev_global_regs->daint) &
-+ ifxusb_rreg(&_core_if->dev_global_regs->daintmsk);
-+ return (v & 0xffff);
-+ }
-+
-+ static inline uint32_t ifxusb_read_dev_all_out_ep_intr(ifxusb_core_if_t *_core_if)
-+ {
-+ uint32_t v;
-+ v = ifxusb_rreg(&_core_if->dev_global_regs->daint) &
-+ ifxusb_rreg(&_core_if->dev_global_regs->daintmsk);
-+ return ((v & 0xffff0000) >> 16);
-+ }
-+
-+ static inline uint32_t ifxusb_read_dev_in_ep_intr(ifxusb_core_if_t *_core_if, int _ep_num)
-+ {
-+ uint32_t v;
-+ v = ifxusb_rreg(&_core_if->in_ep_regs[_ep_num]->diepint) &
-+ ifxusb_rreg(&_core_if->dev_global_regs->diepmsk);
-+ return v;
-+ }
-+
-+ static inline uint32_t ifxusb_read_dev_out_ep_intr(ifxusb_core_if_t *_core_if, int _ep_num)
-+ {
-+ uint32_t v;
-+ v = ifxusb_rreg(&_core_if->out_ep_regs[_ep_num]->doepint) &
-+ ifxusb_rreg(&_core_if->dev_global_regs->doepmsk);
-+ return v;
-+ }
-+
-+#endif
-+
-+extern void ifxusb_attr_create (void *_dev);
-+
-+extern void ifxusb_attr_remove (void *_dev);
-+
-+///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+#endif // !defined(__IFXUSB_CIF_H__)
-+
-+
---- /dev/null
-+++ b/drivers/usb/ifxhcd/ifxusb_cif_d.c
-@@ -0,0 +1,458 @@
-+/*****************************************************************************
-+ ** FILE NAME : ifxusb_cif_d.c
-+ ** PROJECT : IFX USB sub-system V3
-+ ** MODULES : IFX USB sub-system Host and Device driver
-+ ** SRC VERSION : 1.0
-+ ** DATE : 1/Jan/2009
-+ ** AUTHOR : Chen, Howard
-+ ** DESCRIPTION : The Core Interface provides basic services for accessing and
-+ ** managing the IFX USB hardware. These services are used by the
-+ ** Peripheral Controller Driver only.
-+ *****************************************************************************/
-+
-+/*!
-+ \file ifxusb_cif_d.c
-+ \ingroup IFXUSB_DRIVER_V3
-+ \brief This file contains the interface to the IFX USB Core.
-+*/
-+
-+#include <linux/version.h>
-+#include "ifxusb_version.h"
-+
-+
-+#include <asm/byteorder.h>
-+#include <asm/unaligned.h>
-+
-+#ifdef __DEBUG__
-+ #include <linux/jiffies.h>
-+#endif
-+
-+#include "ifxusb_plat.h"
-+#include "ifxusb_regs.h"
-+#include "ifxusb_cif.h"
-+
-+#include "ifxpcd.h"
-+
-+
-+
-+/*!
-+ \brief Initializes the DevSpd field of the DCFG register depending on the PHY type
-+ and the enumeration speed of the device.
-+ \param _core_if Pointer of core_if structure
-+ */
-+void ifxusb_dev_init_spd(ifxusb_core_if_t *_core_if)
-+{
-+ uint32_t val;
-+ dcfg_data_t dcfg;
-+
-+ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-+ if (_core_if->params.speed == IFXUSB_PARAM_SPEED_FULL)
-+ /* High speed PHY running at full speed */
-+ val = 0x1;
-+ else
-+ /* High speed PHY running at high speed and full speed*/
-+ val = 0x0;
-+
-+ IFX_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val);
-+ dcfg.d32 = ifxusb_rreg(&_core_if->dev_global_regs->dcfg);
-+ dcfg.b.devspd = val;
-+ ifxusb_wreg(&_core_if->dev_global_regs->dcfg, dcfg.d32);
-+}
-+
-+
-+/*!
-+ \brief This function enables the Device mode interrupts.
-+ \param _core_if Pointer of core_if structure
-+ */
-+void ifxusb_dev_enable_interrupts(ifxusb_core_if_t *_core_if)
-+{
-+ gint_data_t intr_mask ={ .d32 = 0};
-+ ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
-+
-+ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-+ IFX_DEBUGPL(DBG_CIL, "%s()\n", __func__);
-+
-+ /* Clear any pending OTG Interrupts */
-+ ifxusb_wreg( &global_regs->gotgint, 0xFFFFFFFF);
-+
-+ /* Clear any pending interrupts */
-+ ifxusb_wreg( &global_regs->gintsts, 0xFFFFFFFF);
-+
-+ /* Enable the interrupts in the GINTMSK.*/
-+ intr_mask.b.modemismatch = 1;
-+ intr_mask.b.conidstschng = 1;
-+ intr_mask.b.wkupintr = 1;
-+ intr_mask.b.disconnect = 1;
-+ intr_mask.b.usbsuspend = 1;
-+
-+ intr_mask.b.usbreset = 1;
-+ intr_mask.b.enumdone = 1;
-+ intr_mask.b.inepintr = 1;
-+ intr_mask.b.outepintr = 1;
-+ intr_mask.b.erlysuspend = 1;
-+ #ifndef __DED_FIFO__
-+// intr_mask.b.epmismatch = 1;
-+ #endif
-+
-+ ifxusb_mreg( &global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
-+ IFX_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__, ifxusb_rreg( &global_regs->gintmsk));
-+}
-+
-+/*!
-+ \brief Gets the current USB frame number. This is the frame number from the last SOF packet.
-+ \param _core_if Pointer of core_if structure
-+ */
-+uint32_t ifxusb_dev_get_frame_number(ifxusb_core_if_t *_core_if)
-+{
-+ dsts_data_t dsts;
-+ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-+ dsts.d32 = ifxusb_rreg(&_core_if->dev_global_regs->dsts);
-+ /* read current frame/microfreme number from DSTS register */
-+ return dsts.b.soffn;
-+}
-+
-+
-+/*!
-+ \brief Set the EP STALL.
-+ */
-+void ifxusb_dev_ep_set_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _is_in)
-+{
-+ depctl_data_t depctl;
-+ volatile uint32_t *depctl_addr;
-+
-+ IFX_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, _epno, (_is_in?"IN":"OUT"));
-+
-+ depctl_addr = (_is_in)? (&(_core_if->in_ep_regs [_epno]->diepctl)):
-+ (&(_core_if->out_ep_regs[_epno]->doepctl));
-+ depctl.d32 = ifxusb_rreg(depctl_addr);
-+ depctl.b.stall = 1;
-+
-+ if (_is_in && depctl.b.epena)
-+ depctl.b.epdis = 1;
-+
-+ ifxusb_wreg(depctl_addr, depctl.d32);
-+ IFX_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",ifxusb_rreg(depctl_addr));
-+ return;
-+}
-+
-+/*!
-+\brief Clear the EP STALL.
-+ */
-+void ifxusb_dev_ep_clear_stall(ifxusb_core_if_t *_core_if, uint8_t _epno, uint8_t _ep_type, uint8_t _is_in)
-+{
-+ depctl_data_t depctl;
-+ volatile uint32_t *depctl_addr;
-+
-+ IFX_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, _epno, (_is_in?"IN":"OUT"));
-+
-+ depctl_addr = (_is_in)? (&(_core_if->in_ep_regs [_epno]->diepctl)):
-+ (&(_core_if->out_ep_regs[_epno]->doepctl));
-+
-+ depctl.d32 = ifxusb_rreg(depctl_addr);
-+ /* clear the stall bits */
-+ depctl.b.stall = 0;
-+
-+ /*
-+ * USB Spec 9.4.5: For endpoints using data toggle, regardless
-+ * of whether an endpoint has the Halt feature set, a
-+ * ClearFeature(ENDPOINT_HALT) request always results in the
-+ * data toggle being reinitialized to DATA0.
-+ */
-+ if (_ep_type == IFXUSB_EP_TYPE_INTR || _ep_type == IFXUSB_EP_TYPE_BULK)
-+ depctl.b.setd0pid = 1; /* DATA0 */
-+
-+ ifxusb_wreg(depctl_addr, depctl.d32);
-+ IFX_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",ifxusb_rreg(depctl_addr));
-+ return;
-+}
-+
-+/*!
-+ \brief This function initializes the IFXUSB controller registers for Device mode.
-+ This function flushes the Tx and Rx FIFOs and it flushes any entries in the
-+ request queues.
-+ \param _core_if Pointer of core_if structure
-+ \param _params parameters to be set
-+ */
-+void ifxusb_dev_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t *_params)
-+{
-+ ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
-+
-+ gusbcfg_data_t usbcfg ={.d32 = 0};
-+ gahbcfg_data_t ahbcfg ={.d32 = 0};
-+ dcfg_data_t dcfg ={.d32 = 0};
-+ grstctl_t resetctl ={.d32 = 0};
-+ gotgctl_data_t gotgctl ={.d32 = 0};
-+
-+ uint32_t dir;
-+ int i;
-+
-+ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-+ IFX_DEBUGPL(DBG_CILV, "%s(%p)\n",__func__,_core_if);
-+
-+ /* Copy Params */
-+ _core_if->params.dma_burst_size = _params->dma_burst_size;
-+ _core_if->params.speed = _params->speed;
-+ if(_params->max_transfer_size < 2048 || _params->max_transfer_size > ((1 << (_core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1) )
-+ _core_if->params.max_transfer_size = ((1 << (_core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1);
-+ else
-+ _core_if->params.max_transfer_size = _params->max_transfer_size;
-+
-+ if(_params->max_packet_count < 16 || _params->max_packet_count > ((1 << (_core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1) )
-+ _core_if->params.max_packet_count= ((1 << (_core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1);
-+ else
-+ _core_if->params.max_packet_count= _params->max_packet_count;
-+ _core_if->params.phy_utmi_width = _params->phy_utmi_width;
-+ _core_if->params.turn_around_time_hs = _params->turn_around_time_hs;
-+ _core_if->params.turn_around_time_fs = _params->turn_around_time_fs;
-+ _core_if->params.timeout_cal_hs = _params->timeout_cal_hs;
-+ _core_if->params.timeout_cal_fs = _params->timeout_cal_fs;
-+
-+ #ifdef __DED_FIFO__
-+ _core_if->params.thr_ctl = _params->thr_ctl;
-+ _core_if->params.tx_thr_length = _params->tx_thr_length;
-+ _core_if->params.rx_thr_length = _params->rx_thr_length;
-+ #endif
-+
-+ /* Reset the Controller */
-+ do
-+ {
-+ while(ifxusb_core_soft_reset( _core_if ))
-+ ifxusb_hard_reset(_core_if);
-+ } while (ifxusb_is_host_mode(_core_if));
-+
-+ usbcfg.d32 = ifxusb_rreg(&global_regs->gusbcfg);
-+ #if 0
-+ #if defined(__DED_FIFO__)
-+ usbcfg.b.ForceDevMode = 1;
-+ usbcfg.b.ForceHstMode = 0;
-+ #endif
-+ #endif
-+ usbcfg.b.term_sel_dl_pulse = 0;
-+ ifxusb_wreg (&global_regs->gusbcfg, usbcfg.d32);
-+
-+ /* This programming sequence needs to happen in FS mode before any other
-+ * programming occurs */
-+ /* High speed PHY. */
-+ if (!_core_if->phy_init_done)
-+ {
-+ _core_if->phy_init_done = 1;
-+ /* HS PHY parameters. These parameters are preserved
-+ * during soft reset so only program the first time. Do
-+ * a soft reset immediately after setting phyif. */
-+ usbcfg.b.ulpi_utmi_sel = 0; //UTMI+
-+ usbcfg.b.phyif = ( _core_if->params.phy_utmi_width == 16)?1:0;
-+ ifxusb_wreg( &global_regs->gusbcfg, usbcfg.d32);
-+ /* Reset after setting the PHY parameters */
-+ ifxusb_core_soft_reset( _core_if );
-+ }
-+
-+ /* Program the GAHBCFG Register.*/
-+ switch (_core_if->params.dma_burst_size)
-+ {
-+ case 0 :
-+ ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_SINGLE;
-+ break;
-+ case 1 :
-+ ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR;
-+ break;
-+ case 4 :
-+ ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR4;
-+ break;
-+ case 8 :
-+ ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR8;
-+ break;
-+ case 16:
-+ ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR16;
-+ break;
-+ }
-+ ahbcfg.b.dmaenable = 1;
-+ ifxusb_wreg(&global_regs->gahbcfg, ahbcfg.d32);
-+
-+ /* Program the GUSBCFG register. */
-+ usbcfg.d32 = ifxusb_rreg( &global_regs->gusbcfg );
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = 0;
-+ ifxusb_wreg( &global_regs->gusbcfg, usbcfg.d32);
-+
-+ /* Restart the Phy Clock */
-+ ifxusb_wreg(_core_if->pcgcctl, 0);
-+
-+ /* Device configuration register */
-+ ifxusb_dev_init_spd(_core_if);
-+ dcfg.d32 = ifxusb_rreg( &_core_if->dev_global_regs->dcfg);
-+ dcfg.b.perfrint = IFXUSB_DCFG_FRAME_INTERVAL_80;
-+ #if defined(__DED_FIFO__)
-+ #if defined(__DESC_DMA__)
-+ dcfg.b.descdma = 1;
-+ #else
-+ dcfg.b.descdma = 0;
-+ #endif
-+ #endif
-+
-+ ifxusb_wreg( &_core_if->dev_global_regs->dcfg, dcfg.d32 );
-+
-+ /* Configure data FIFO sizes */
-+ _core_if->params.data_fifo_size = _core_if->hwcfg3.b.dfifo_depth;
-+ _core_if->params.rx_fifo_size = ifxusb_rreg(&global_regs->grxfsiz);
-+ IFX_DEBUGPL(DBG_CIL, "Initial: FIFO Size=0x%06X\n" , _core_if->params.data_fifo_size);
-+ IFX_DEBUGPL(DBG_CIL, " Rx FIFO Size=0x%06X\n", _core_if->params.rx_fifo_size);
-+
-+ _core_if->params.tx_fifo_size[0]= ifxusb_rreg(&global_regs->gnptxfsiz) >> 16;
-+
-+ #ifdef __DED_FIFO__
-+ for (i=1; i <= _core_if->hwcfg4.b.num_in_eps; i++)
-+ _core_if->params.tx_fifo_size[i] =
-+ ifxusb_rreg(&global_regs->dptxfsiz_dieptxf[i-1]) >> 16;
-+ #else
-+ for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
-+ _core_if->params.tx_fifo_size[i+1] =
-+ ifxusb_rreg(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
-+ #endif
-+
-+ #ifdef __DEBUG__
-+ #ifdef __DED_FIFO__
-+ for (i=0; i <= _core_if->hwcfg4.b.num_in_eps; i++)
-+ IFX_DEBUGPL(DBG_CIL, " Tx[%02d] FIFO Size=0x%06X\n",i, _core_if->params.tx_fifo_size[i]);
-+ #else
-+ IFX_DEBUGPL(DBG_CIL, " NPTx FIFO Size=0x%06X\n", _core_if->params.tx_fifo_size[0]);
-+ for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
-+ IFX_DEBUGPL(DBG_CIL, " PTx[%02d] FIFO Size=0x%06X\n",i, _core_if->params.tx_fifo_size[i+1]);
-+ #endif
-+ #endif
-+
-+ {
-+ fifosize_data_t txfifosize;
-+ if(_params->data_fifo_size >=0 && _params->data_fifo_size < _core_if->params.data_fifo_size)
-+ _core_if->params.data_fifo_size = _params->data_fifo_size;
-+
-+
-+ if(_params->rx_fifo_size >=0 && _params->rx_fifo_size < _core_if->params.rx_fifo_size)
-+ _core_if->params.rx_fifo_size = _params->rx_fifo_size;
-+ if(_core_if->params.data_fifo_size < _core_if->params.rx_fifo_size)
-+ _core_if->params.rx_fifo_size = _core_if->params.data_fifo_size;
-+ ifxusb_wreg( &global_regs->grxfsiz, _core_if->params.rx_fifo_size);
-+
-+ for (i=0; i < MAX_EPS_CHANNELS; i++)
-+ if(_params->tx_fifo_size[i] >=0 && _params->tx_fifo_size[i] < _core_if->params.tx_fifo_size[i])
-+ _core_if->params.tx_fifo_size[i] = _params->tx_fifo_size[i];
-+
-+ txfifosize.b.startaddr = _core_if->params.rx_fifo_size;
-+ #ifdef __DED_FIFO__
-+ if(txfifosize.b.startaddr + _core_if->params.tx_fifo_size[0] > _core_if->params.data_fifo_size)
-+ _core_if->params.tx_fifo_size[0]= _core_if->params.data_fifo_size - txfifosize.b.startaddr;
-+ txfifosize.b.depth=_core_if->params.tx_fifo_size[0];
-+ ifxusb_wreg( &global_regs->gnptxfsiz, txfifosize.d32);
-+ txfifosize.b.startaddr += _core_if->params.tx_fifo_size[0];
-+ for (i=1; i <= _core_if->hwcfg4.b.num_in_eps; i++)
-+ {
-+ if(txfifosize.b.startaddr + _core_if->params.tx_fifo_size[i] > _core_if->params.data_fifo_size)
-+ _core_if->params.tx_fifo_size[i]= _core_if->params.data_fifo_size - txfifosize.b.startaddr;
-+ txfifosize.b.depth=_core_if->params.tx_fifo_size[i];
-+ ifxusb_wreg( &global_regs->dptxfsiz_dieptxf[i-1], txfifosize.d32);
-+ txfifosize.b.startaddr += _core_if->params.tx_fifo_size[i];
-+ }
-+ #else
-+ if(txfifosize.b.startaddr + _core_if->params.tx_fifo_size[0] > _core_if->params.data_fifo_size)
-+ _core_if->params.tx_fifo_size[0]= _core_if->params.data_fifo_size - txfifosize.b.startaddr;
-+ txfifosize.b.depth=_core_if->params.tx_fifo_size[0];
-+ ifxusb_wreg( &global_regs->gnptxfsiz, txfifosize.d32);
-+ txfifosize.b.startaddr += _core_if->params.tx_fifo_size[0];
-+ for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
-+ {
-+ if(txfifosize.b.startaddr + _core_if->params.tx_fifo_size[i+1] > _core_if->params.data_fifo_size)
-+ _core_if->params.tx_fifo_size[i+1]= _core_if->params.data_fifo_size - txfifosize.b.startaddr;
-+ //txfifosize.b.depth=_core_if->params.tx_fifo_size[i+1];
-+ ifxusb_wreg( &global_regs->dptxfsiz_dieptxf[i], txfifosize.d32);
-+ txfifosize.b.startaddr += _core_if->params.tx_fifo_size[i+1];
-+ }
-+ #endif
-+ }
-+
-+ #ifdef __DEBUG__
-+ {
-+ fifosize_data_t fifosize;
-+ IFX_DEBUGPL(DBG_CIL, "Result : FIFO Size=0x%06X\n" , _core_if->params.data_fifo_size);
-+
-+ IFX_DEBUGPL(DBG_CIL, " Rx FIFO =0x%06X Sz=0x%06X\n", 0,ifxusb_rreg(&global_regs->grxfsiz));
-+ #ifdef __DED_FIFO__
-+ fifosize.d32=ifxusb_rreg(&global_regs->gnptxfsiz);
-+ IFX_DEBUGPL(DBG_CIL, " Tx[00] FIFO =0x%06X Sz=0x%06X\n", fifosize.b.startaddr,fifosize.b.depth);
-+ for (i=1; i <= _core_if->hwcfg4.b.num_in_eps; i++)
-+ {
-+ fifosize.d32=ifxusb_rreg(&global_regs->dptxfsiz_dieptxf[i-1]);
-+ IFX_DEBUGPL(DBG_CIL, " Tx[%02d] FIFO 0x%06X Sz=0x%06X\n",i, fifosize.b.startaddr,fifosize.b.depth);
-+ }
-+ #else
-+ fifosize.d32=ifxusb_rreg(&global_regs->gnptxfsiz);
-+ IFX_DEBUGPL(DBG_CIL, " NPTx FIFO =0x%06X Sz=0x%06X\n", fifosize.b.startaddr,fifosize.b.depth);
-+ for (i=0; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
-+ {
-+ fifosize.d32=ifxusb_rreg(&global_regs->dptxfsiz_dieptxf[i]);
-+ IFX_DEBUGPL(DBG_CIL, " PTx[%02d] FIFO 0x%06X Sz=0x%06X\n",i, fifosize.b.startaddr,fifosize.b.depth);
-+ }
-+ #endif
-+ }
-+ #endif
-+
-+ /* Clear Host Set HNP Enable in the OTG Control Register */
-+ gotgctl.b.hstsethnpen = 1;
-+ ifxusb_mreg( &global_regs->gotgctl, gotgctl.d32, 0);
-+
-+ /* Flush the FIFOs */
-+ ifxusb_flush_tx_fifo(_core_if, 0x10); /* all Tx FIFOs */
-+ ifxusb_flush_rx_fifo(_core_if);
-+
-+ /* Flush the Learning Queue. */
-+ resetctl.b.intknqflsh = 1;
-+ ifxusb_wreg( &global_regs->grstctl, resetctl.d32);
-+
-+ /* Clear all pending Device Interrupts */
-+ ifxusb_wreg( &_core_if->dev_global_regs->diepmsk , 0 );
-+ ifxusb_wreg( &_core_if->dev_global_regs->doepmsk , 0 );
-+ ifxusb_wreg( &_core_if->dev_global_regs->daint , 0xFFFFFFFF );
-+ ifxusb_wreg( &_core_if->dev_global_regs->daintmsk, 0 );
-+
-+ dir=_core_if->hwcfg1.d32;
-+ for (i=0; i <= _core_if->hwcfg2.b.num_dev_ep ; i++,dir>>=2)
-+ {
-+ depctl_data_t depctl;
-+ if((dir&0x03)==0 || (dir&0x03) ==1)
-+ {
-+ depctl.d32 = ifxusb_rreg(&_core_if->in_ep_regs[i]->diepctl);
-+ if (depctl.b.epena)
-+ {
-+ depctl.d32 = 0;
-+ depctl.b.epdis = 1;
-+ depctl.b.snak = 1;
-+ }
-+ else
-+ depctl.d32 = 0;
-+ ifxusb_wreg( &_core_if->in_ep_regs[i]->diepctl, depctl.d32);
-+ #ifndef __DESC_DMA__
-+ ifxusb_wreg( &_core_if->in_ep_regs[i]->dieptsiz, 0);
-+ #endif
-+ ifxusb_wreg( &_core_if->in_ep_regs[i]->diepdma, 0);
-+ ifxusb_wreg( &_core_if->in_ep_regs[i]->diepint, 0xFF);
-+ }
-+
-+ if((dir&0x03)==0 || (dir&0x03) ==2)
-+ {
-+ depctl.d32 = ifxusb_rreg(&_core_if->out_ep_regs[i]->doepctl);
-+ if (depctl.b.epena)
-+ {
-+ depctl.d32 = 0;
-+ depctl.b.epdis = 1;
-+ depctl.b.snak = 1;
-+ }
-+ else
-+ depctl.d32 = 0;
-+ ifxusb_wreg( &_core_if->out_ep_regs[i]->doepctl, depctl.d32);
-+ #ifndef __DESC_DMA__
-+ ifxusb_wreg( &_core_if->out_ep_regs[i]->doeptsiz, 0);
-+ #endif
-+ ifxusb_wreg( &_core_if->out_ep_regs[i]->doepdma, 0);
-+ ifxusb_wreg( &_core_if->out_ep_regs[i]->doepint, 0xFF);
-+ }
-+ }
-+}
-+
---- /dev/null
-+++ b/drivers/usb/ifxhcd/ifxusb_cif_h.c
-@@ -0,0 +1,846 @@
-+/*****************************************************************************
-+ ** FILE NAME : ifxusb_cif_h.c
-+ ** PROJECT : IFX USB sub-system V3
-+ ** MODULES : IFX USB sub-system Host and Device driver
-+ ** SRC VERSION : 1.0
-+ ** DATE : 1/Jan/2009
-+ ** AUTHOR : Chen, Howard
-+ ** DESCRIPTION : The Core Interface provides basic services for accessing and
-+ ** managing the IFX USB hardware. These services are used by the
-+ ** Host Controller Driver only.
-+ *****************************************************************************/
-+
-+/*!
-+ \file ifxusb_cif_h.c
-+ \ingroup IFXUSB_DRIVER_V3
-+ \brief This file contains the interface to the IFX USB Core.
-+*/
-+#include <linux/version.h>
-+#include "ifxusb_version.h"
-+
-+#include <asm/byteorder.h>
-+#include <asm/unaligned.h>
-+
-+#ifdef __DEBUG__
-+ #include <linux/jiffies.h>
-+#endif
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+#include <linux/ioport.h>
-+#if defined(__UEIP__)
-+// #include <asm/ifx/ifx_board.h>
-+#endif
-+
-+//#include <asm/ifx/ifx_gpio.h>
-+#if defined(__UEIP__)
-+// #include <asm/ifx/ifx_led.h>
-+#endif
-+
-+#include "ifxusb_plat.h"
-+#include "ifxusb_regs.h"
-+#include "ifxusb_cif.h"
-+
-+#include "ifxhcd.h"
-+
-+#if !defined(__UEIP__)
-+ #undef __USING_LED_AS_GPIO__
-+#endif
-+
-+
-+/*!
-+ \brief This function enables the Host mode interrupts.
-+ \param _core_if Pointer of core_if structure
-+ */
-+void ifxusb_host_enable_interrupts(ifxusb_core_if_t *_core_if)
-+{
-+ gint_data_t intr_mask ={ .d32 = 0};
-+ ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
-+
-+ IFX_DEBUGPL(DBG_CIL, "%s()\n", __func__);
-+
-+ /* Clear any pending OTG Interrupts */
-+ ifxusb_wreg( &global_regs->gotgint, 0xFFFFFFFF);
-+
-+ /* Clear any pending interrupts */
-+ ifxusb_wreg( &global_regs->gintsts, 0xFFFFFFFF);
-+
-+ /* Enable the interrupts in the GINTMSK.*/
-+
-+ /* Common interrupts */
-+ intr_mask.b.modemismatch = 1;
-+ intr_mask.b.conidstschng = 1;
-+ intr_mask.b.wkupintr = 1;
-+ intr_mask.b.disconnect = 1;
-+ intr_mask.b.usbsuspend = 1;
-+
-+ /* Host interrupts */
-+ intr_mask.b.sofintr = 1;
-+ intr_mask.b.portintr = 1;
-+ intr_mask.b.hcintr = 1;
-+
-+ ifxusb_mreg( &global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
-+ IFX_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__, ifxusb_rreg( &global_regs->gintmsk));
-+}
-+
-+/*!
-+ \brief This function disables the Host mode interrupts.
-+ \param _core_if Pointer of core_if structure
-+ */
-+void ifxusb_host_disable_interrupts(ifxusb_core_if_t *_core_if)
-+{
-+ ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
-+
-+ IFX_DEBUGPL(DBG_CILV, "%s()\n", __func__);
-+
-+ #if 1
-+ ifxusb_wreg( &global_regs->gintmsk, 0);
-+ #else
-+ /* Common interrupts */
-+ {
-+ gint_data_t intr_mask ={.d32 = 0};
-+ intr_mask.b.modemismatch = 1;
-+ intr_mask.b.rxstsqlvl = 1;
-+ intr_mask.b.conidstschng = 1;
-+ intr_mask.b.wkupintr = 1;
-+ intr_mask.b.disconnect = 1;
-+ intr_mask.b.usbsuspend = 1;
-+
-+ /* Host interrupts */
-+ intr_mask.b.sofintr = 1;
-+ intr_mask.b.portintr = 1;
-+ intr_mask.b.hcintr = 1;
-+ intr_mask.b.ptxfempty = 1;
-+ intr_mask.b.nptxfempty = 1;
-+ ifxusb_mreg(&global_regs->gintmsk, intr_mask.d32, 0);
-+ }
-+ #endif
-+}
-+
-+/*!
-+ \brief This function initializes the IFXUSB controller registers for Host mode.
-+ This function flushes the Tx and Rx FIFOs and it flushes any entries in the
-+ request queues.
-+ \param _core_if Pointer of core_if structure
-+ \param _params parameters to be set
-+ */
-+void ifxusb_host_core_init(ifxusb_core_if_t *_core_if, ifxusb_params_t *_params)
-+{
-+ ifxusb_core_global_regs_t *global_regs = _core_if->core_global_regs;
-+
-+ gusbcfg_data_t usbcfg ={.d32 = 0};
-+ gahbcfg_data_t ahbcfg ={.d32 = 0};
-+ gotgctl_data_t gotgctl ={.d32 = 0};
-+
-+ int i;
-+
-+ IFX_DEBUGPL(DBG_CILV, "%s(%p)\n",__func__,_core_if);
-+
-+ /* Copy Params */
-+
-+ _core_if->params.dma_burst_size = _params->dma_burst_size;
-+ _core_if->params.speed = _params->speed;
-+ _core_if->params.max_transfer_size = _params->max_transfer_size;
-+ _core_if->params.max_packet_count = _params->max_packet_count;
-+ _core_if->params.phy_utmi_width = _params->phy_utmi_width;
-+ _core_if->params.turn_around_time_hs = _params->turn_around_time_hs;
-+ _core_if->params.turn_around_time_fs = _params->turn_around_time_fs;
-+ _core_if->params.timeout_cal_hs = _params->timeout_cal_hs;
-+ _core_if->params.timeout_cal_fs = _params->timeout_cal_fs;
-+
-+ /* Reset the Controller */
-+ do
-+ {
-+ while(ifxusb_core_soft_reset( _core_if ))
-+ ifxusb_hard_reset(_core_if);
-+ } while (ifxusb_is_device_mode(_core_if));
-+
-+ usbcfg.d32 = ifxusb_rreg(&global_regs->gusbcfg);
-+// usbcfg.b.ulpi_ext_vbus_drv = 1;
-+ usbcfg.b.term_sel_dl_pulse = 0;
-+ ifxusb_wreg (&global_regs->gusbcfg, usbcfg.d32);
-+
-+ /* This programming sequence needs to happen in FS mode before any other
-+ * programming occurs */
-+ /* High speed PHY. */
-+ if (!_core_if->phy_init_done)
-+ {
-+ _core_if->phy_init_done = 1;
-+ /* HS PHY parameters. These parameters are preserved
-+ * during soft reset so only program the first time. Do
-+ * a soft reset immediately after setting phyif. */
-+ usbcfg.b.ulpi_utmi_sel = 0; //UTMI+
-+ usbcfg.b.phyif = ( _core_if->params.phy_utmi_width == 16)?1:0;
-+ ifxusb_wreg( &global_regs->gusbcfg, usbcfg.d32);
-+ /* Reset after setting the PHY parameters */
-+ ifxusb_core_soft_reset( _core_if );
-+ }
-+
-+ usbcfg.d32 = ifxusb_rreg(&global_regs->gusbcfg);
-+// usbcfg.b.ulpi_fsls = 0;
-+// usbcfg.b.ulpi_clk_sus_m = 0;
-+ ifxusb_wreg(&global_regs->gusbcfg, usbcfg.d32);
-+
-+ /* Program the GAHBCFG Register.*/
-+ switch (_core_if->params.dma_burst_size)
-+ {
-+ case 0 :
-+ ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_SINGLE;
-+ break;
-+ case 1 :
-+ ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR;
-+ break;
-+ case 4 :
-+ ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR4;
-+ break;
-+ case 8 :
-+ ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR8;
-+ break;
-+ case 16:
-+ ahbcfg.b.hburstlen = IFXUSB_GAHBCFG_INT_DMA_BURST_INCR16;
-+ break;
-+ }
-+ ahbcfg.b.dmaenable = 1;
-+ ifxusb_wreg(&global_regs->gahbcfg, ahbcfg.d32);
-+
-+ /* Program the GUSBCFG register. */
-+ usbcfg.d32 = ifxusb_rreg( &global_regs->gusbcfg );
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = 0;
-+ ifxusb_wreg( &global_regs->gusbcfg, usbcfg.d32);
-+
-+ /* Restart the Phy Clock */
-+ ifxusb_wreg(_core_if->pcgcctl, 0);
-+
-+ /* Initialize Host Configuration Register */
-+ {
-+ hcfg_data_t hcfg;
-+ hcfg.d32 = ifxusb_rreg(&_core_if->host_global_regs->hcfg);
-+ hcfg.b.fslspclksel = IFXUSB_HCFG_30_60_MHZ;
-+ if (_params->speed == IFXUSB_PARAM_SPEED_FULL)
-+ hcfg.b.fslssupp = 1;
-+ ifxusb_wreg(&_core_if->host_global_regs->hcfg, hcfg.d32);
-+ }
-+
-+ _core_if->params.host_channels=(_core_if->hwcfg2.b.num_host_chan + 1);
-+
-+ if(_params->host_channels>0 && _params->host_channels < _core_if->params.host_channels)
-+ _core_if->params.host_channels = _params->host_channels;
-+
-+ /* Configure data FIFO sizes */
-+ _core_if->params.data_fifo_size = _core_if->hwcfg3.b.dfifo_depth;
-+ _core_if->params.rx_fifo_size = ifxusb_rreg(&global_regs->grxfsiz);
-+ _core_if->params.nperio_tx_fifo_size= ifxusb_rreg(&global_regs->gnptxfsiz) >> 16;
-+ _core_if->params.perio_tx_fifo_size = ifxusb_rreg(&global_regs->hptxfsiz) >> 16;
-+ IFX_DEBUGPL(DBG_CIL, "Initial: FIFO Size=0x%06X\n" , _core_if->params.data_fifo_size);
-+ IFX_DEBUGPL(DBG_CIL, " Rx FIFO Size=0x%06X\n", _core_if->params.rx_fifo_size);
-+ IFX_DEBUGPL(DBG_CIL, " NPTx FIFO Size=0x%06X\n", _core_if->params.nperio_tx_fifo_size);
-+ IFX_DEBUGPL(DBG_CIL, " PTx FIFO Size=0x%06X\n", _core_if->params.perio_tx_fifo_size);
-+
-+ {
-+ fifosize_data_t txfifosize;
-+ if(_params->data_fifo_size >=0 && _params->data_fifo_size < _core_if->params.data_fifo_size)
-+ _core_if->params.data_fifo_size = _params->data_fifo_size;
-+
-+ if( _params->rx_fifo_size >= 0 && _params->rx_fifo_size < _core_if->params.rx_fifo_size)
-+ _core_if->params.rx_fifo_size = _params->rx_fifo_size;
-+ if( _params->nperio_tx_fifo_size >=0 && _params->nperio_tx_fifo_size < _core_if->params.nperio_tx_fifo_size)
-+ _core_if->params.nperio_tx_fifo_size = _params->nperio_tx_fifo_size;
-+ if( _params->perio_tx_fifo_size >=0 && _params->perio_tx_fifo_size < _core_if->params.perio_tx_fifo_size)
-+ _core_if->params.perio_tx_fifo_size = _params->perio_tx_fifo_size;
-+
-+ if(_core_if->params.data_fifo_size < _core_if->params.rx_fifo_size)
-+ _core_if->params.rx_fifo_size = _core_if->params.data_fifo_size;
-+ ifxusb_wreg( &global_regs->grxfsiz, _core_if->params.rx_fifo_size);
-+ txfifosize.b.startaddr = _core_if->params.rx_fifo_size;
-+
-+ if(txfifosize.b.startaddr + _core_if->params.nperio_tx_fifo_size > _core_if->params.data_fifo_size)
-+ _core_if->params.nperio_tx_fifo_size = _core_if->params.data_fifo_size - txfifosize.b.startaddr;
-+ txfifosize.b.depth=_core_if->params.nperio_tx_fifo_size;
-+ ifxusb_wreg( &global_regs->gnptxfsiz, txfifosize.d32);
-+ txfifosize.b.startaddr += _core_if->params.nperio_tx_fifo_size;
-+
-+ if(txfifosize.b.startaddr + _core_if->params.perio_tx_fifo_size > _core_if->params.data_fifo_size)
-+ _core_if->params.perio_tx_fifo_size = _core_if->params.data_fifo_size - txfifosize.b.startaddr;
-+ txfifosize.b.depth=_core_if->params.perio_tx_fifo_size;
-+ ifxusb_wreg( &global_regs->hptxfsiz, txfifosize.d32);
-+ txfifosize.b.startaddr += _core_if->params.perio_tx_fifo_size;
-+ }
-+
-+ #ifdef __DEBUG__
-+ {
-+ fifosize_data_t fifosize;
-+ IFX_DEBUGPL(DBG_CIL, "Result : FIFO Size=0x%06X\n" , _core_if->params.data_fifo_size);
-+
-+ fifosize.d32=ifxusb_rreg(&global_regs->grxfsiz);
-+ IFX_DEBUGPL(DBG_CIL, " Rx FIFO =0x%06X 0x%06X\n", fifosize.b.startaddr,fifosize.b.depth);
-+ fifosize.d32=ifxusb_rreg(&global_regs->gnptxfsiz);
-+ IFX_DEBUGPL(DBG_CIL, " NPTx FIFO =0x%06X 0x%06X\n", fifosize.b.startaddr,fifosize.b.depth);
-+ fifosize.d32=ifxusb_rreg(&global_regs->hptxfsiz);
-+ IFX_DEBUGPL(DBG_CIL, " PTx FIFO =0x%06X 0x%06X\n", fifosize.b.startaddr,fifosize.b.depth);
-+ }
-+ #endif
-+
-+ /* Clear Host Set HNP Enable in the OTG Control Register */
-+ gotgctl.b.hstsethnpen = 1;
-+ ifxusb_mreg( &global_regs->gotgctl, gotgctl.d32, 0);
-+
-+ /* Flush the FIFOs */
-+ ifxusb_flush_tx_fifo(_core_if, 0x10); /* all Tx FIFOs */
-+ ifxusb_flush_rx_fifo(_core_if);
-+
-+ for (i = 0; i < _core_if->hwcfg2.b.num_host_chan + 1; i++)
-+ {
-+ hcchar_data_t hcchar;
-+ hcchar.d32 = ifxusb_rreg(&_core_if->hc_regs[i]->hcchar);
-+ hcchar.b.chen = 0;
-+ hcchar.b.chdis = 1;
-+ hcchar.b.epdir = 0;
-+ ifxusb_wreg(&_core_if->hc_regs[i]->hcchar, hcchar.d32);
-+ }
-+ /* Halt all channels to put them into a known state. */
-+ for (i = 0; i < _core_if->hwcfg2.b.num_host_chan + 1; i++)
-+ {
-+ hcchar_data_t hcchar;
-+ int count = 0;
-+
-+ hcchar.d32 = ifxusb_rreg(&_core_if->hc_regs[i]->hcchar);
-+ hcchar.b.chen = 1;
-+ hcchar.b.chdis = 1;
-+ hcchar.b.epdir = 0;
-+ ifxusb_wreg(&_core_if->hc_regs[i]->hcchar, hcchar.d32);
-+
-+ IFX_DEBUGPL(DBG_HCDV, "%s: Halt channel %d\n", __func__, i);
-+ do{
-+ hcchar.d32 = ifxusb_rreg(&_core_if->hc_regs[i]->hcchar);
-+ if (++count > 1000)
-+ {
-+ IFX_ERROR("%s: Unable to clear halt on channel %d\n", __func__, i);
-+ break;
-+ }
-+ } while (hcchar.b.chen);
-+ }
-+}
-+
-+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+#if defined(__UEIP__)
-+ #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
-+ int ifxusb_vbus_status =-1;
-+ #endif
-+
-+ #if defined(IFX_GPIO_USB_VBUS1) || defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
-+ int ifxusb_vbus1_status =-1;
-+ #endif
-+
-+ #if defined(IFX_GPIO_USB_VBUS2) || defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
-+ int ifxusb_vbus2_status =-1;
-+ #endif
-+
-+ #if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
-+ static void *g_usb_vbus_trigger = NULL;
-+ #endif
-+ #if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
-+ static void *g_usb_vbus1_trigger = NULL;
-+ #endif
-+ #if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
-+ static void *g_usb_vbus2_trigger = NULL;
-+ #endif
-+
-+ #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
-+ int ifxusb_vbus_gpio_inited=0;
-+ #endif
-+
-+#else //defined(__UEIP__)
-+ int ifxusb_vbus_gpio_inited=0;
-+#endif
-+
-+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+void ifxusb_vbus_init(ifxusb_core_if_t *_core_if)
-+{
-+ #if defined(__UEIP__)
-+ #if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
-+ if ( !g_usb_vbus_trigger )
-+ {
-+ ifx_led_trigger_register("USB_VBUS", &g_usb_vbus_trigger);
-+ if ( g_usb_vbus_trigger != NULL )
-+ {
-+ struct ifx_led_trigger_attrib attrib = {0};
-+ attrib.delay_on = 0;
-+ attrib.delay_off = 0;
-+ attrib.timeout = 0;
-+ attrib.def_value = 0;
-+ attrib.flags = IFX_LED_TRIGGER_ATTRIB_DELAY_ON | IFX_LED_TRIGGER_ATTRIB_DELAY_OFF | IFX_LED_TRIGGER_ATTRIB_TIMEOUT | IFX_LED_TRIGGER_ATTRIB_DEF_VALUE;
-+ IFX_DEBUGP("Reg USB power!!\n");
-+ ifx_led_trigger_set_attrib(g_usb_vbus_trigger, &attrib);
-+ ifxusb_vbus_status =0;
-+ }
-+ }
-+ #endif
-+ #if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
-+ if(_core_if->core_no==0 && !g_usb_vbus1_trigger )
-+ {
-+ ifx_led_trigger_register("USB_VBUS1", &g_usb_vbus1_trigger);
-+ if ( g_usb_vbus1_trigger != NULL )
-+ {
-+ struct ifx_led_trigger_attrib attrib = {0};
-+ attrib.delay_on = 0;
-+ attrib.delay_off = 0;
-+ attrib.timeout = 0;
-+ attrib.def_value = 0;
-+ attrib.flags = IFX_LED_TRIGGER_ATTRIB_DELAY_ON | IFX_LED_TRIGGER_ATTRIB_DELAY_OFF | IFX_LED_TRIGGER_ATTRIB_TIMEOUT | IFX_LED_TRIGGER_ATTRIB_DEF_VALUE;
-+ IFX_DEBUGP("Reg USB1 power!!\n");
-+ ifx_led_trigger_set_attrib(g_usb_vbus1_trigger, &attrib);
-+ ifxusb_vbus1_status =0;
-+ }
-+ }
-+ #endif
-+ #if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
-+ if(_core_if->core_no==1 && !g_usb_vbus2_trigger )
-+ {
-+ ifx_led_trigger_register("USB_VBUS2", &g_usb_vbus2_trigger);
-+ if ( g_usb_vbus2_trigger != NULL )
-+ {
-+ struct ifx_led_trigger_attrib attrib = {0};
-+ attrib.delay_on = 0;
-+ attrib.delay_off = 0;
-+ attrib.timeout = 0;
-+ attrib.def_value = 0;
-+ attrib.flags = IFX_LED_TRIGGER_ATTRIB_DELAY_ON | IFX_LED_TRIGGER_ATTRIB_DELAY_OFF | IFX_LED_TRIGGER_ATTRIB_TIMEOUT | IFX_LED_TRIGGER_ATTRIB_DEF_VALUE;
-+ IFX_DEBUGP("Reg USB2 power!!\n");
-+ ifx_led_trigger_set_attrib(g_usb_vbus2_trigger, &attrib);
-+ ifxusb_vbus2_status =0;
-+ }
-+ }
-+ #endif
-+
-+ #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
-+ /* == 20100712 AVM/WK use gpio_inited as bitmask == */
-+ if(ifxusb_vbus_gpio_inited == 0)
-+ {
-+ if(!ifx_gpio_register(IFX_GPIO_MODULE_USB))
-+ {
-+ IFX_DEBUGP("Register USB VBus through GPIO OK!!\n");
-+ #ifdef IFX_GPIO_USB_VBUS
-+ ifxusb_vbus_status =0;
-+ #endif //IFX_GPIO_USB_VBUS
-+ #ifdef IFX_GPIO_USB_VBUS1
-+ ifxusb_vbus1_status=0;
-+ #endif //IFX_GPIO_USB_VBUS1
-+ #ifdef IFX_GPIO_USB_VBUS2
-+ ifxusb_vbus2_status=0;
-+ #endif //IFX_GPIO_USB_VBUS2
-+ ifxusb_vbus_gpio_inited|= (1<<_core_if->core_no);
-+ }
-+ else
-+ IFX_PRINT("Register USB VBus Failed!!\n");
-+ } else {
-+ ifxusb_vbus_gpio_inited|= (1<<_core_if->core_no);
-+ }
-+ #endif //defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
-+ #endif //defined(__UEIP__)
-+}
-+
-+void ifxusb_vbus_free(ifxusb_core_if_t *_core_if)
-+{
-+ #if defined(__UEIP__)
-+ #if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
-+ if ( g_usb_vbus_trigger )
-+ {
-+ ifx_led_trigger_deregister(g_usb_vbus_trigger);
-+ g_usb_vbus_trigger = NULL;
-+ ifxusb_vbus_status =-1;
-+ }
-+ #endif
-+ #if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
-+ if(_core_if->core_no==0 && g_usb_vbus1_trigger )
-+ {
-+ ifx_led_trigger_deregister(g_usb_vbus1_trigger);
-+ g_usb_vbus1_trigger = NULL;
-+ ifxusb_vbus1_status =-1;
-+ }
-+ #endif
-+ #if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
-+ if(_core_if->core_no==1 && g_usb_vbus2_trigger )
-+ {
-+ ifx_led_trigger_deregister(g_usb_vbus2_trigger);
-+ g_usb_vbus2_trigger = NULL;
-+ ifxusb_vbus2_status =-1;
-+ }
-+ #endif
-+
-+ #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
-+ /* == 20100712 AVM/WK use gpio_inited as bitmask == */
-+ if((ifxusb_vbus_gpio_inited & (1<<_core_if->core_no)) == ifxusb_vbus_gpio_inited)
-+ {
-+ ifx_gpio_deregister(IFX_GPIO_MODULE_USB);
-+ #ifdef IFX_GPIO_USB_VBUS
-+ ifxusb_vbus_status =-1;
-+ #endif //IFX_GPIO_USB_VBUS
-+ #ifdef IFX_GPIO_USB_VBUS1
-+ ifxusb_vbus1_status=-1;
-+ #endif //IFX_GPIO_USB_VBUS1
-+ #ifdef IFX_GPIO_USB_VBUS2
-+ ifxusb_vbus2_status=-1;
-+ #endif //IFX_GPIO_USB_VBUS2
-+ }
-+ ifxusb_vbus_gpio_inited &= ~(1<<_core_if->core_no);
-+ #endif //defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
-+ #endif //defined(__UEIP__)
-+}
-+
-+
-+/*!
-+ \brief Turn on the USB 5V VBus Power
-+ \param _core_if Pointer of core_if structure
-+ */
-+void ifxusb_vbus_on(ifxusb_core_if_t *_core_if)
-+{
-+ IFX_DEBUGP("SENDING VBus POWER UP\n");
-+ #if defined(__UEIP__)
-+ #if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
-+ if ( g_usb_vbus_trigger && ifxusb_vbus_status==0)
-+ {
-+ ifx_led_trigger_activate(g_usb_vbus_trigger);
-+ IFX_DEBUGP("Enable USB power!!\n");
-+ ifxusb_vbus_status=1;
-+ }
-+ #endif
-+ #if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
-+ if(_core_if->core_no==0 && g_usb_vbus1_trigger && ifxusb_vbus1_status==0)
-+ {
-+ ifx_led_trigger_activate(g_usb_vbus1_trigger);
-+ IFX_DEBUGP("Enable USB1 power!!\n");
-+ ifxusb_vbus1_status=1;
-+ }
-+ #endif
-+ #if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
-+ if(_core_if->core_no==1 && g_usb_vbus2_trigger && ifxusb_vbus2_status==0)
-+ {
-+ ifx_led_trigger_activate(g_usb_vbus2_trigger);
-+ IFX_DEBUGP("Enable USB2 power!!\n");
-+ ifxusb_vbus2_status=1;
-+ }
-+ #endif
-+
-+ #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
-+ if(ifxusb_vbus_gpio_inited)
-+ {
-+ #if defined(IFX_GPIO_USB_VBUS)
-+ if(ifxusb_vbus_status==0)
-+ {
-+ ifx_gpio_output_set(IFX_GPIO_USB_VBUS,IFX_GPIO_MODULE_USB);
-+ ifxusb_vbus_status=1;
-+ }
-+ #endif
-+ #if defined(IFX_GPIO_USB_VBUS1)
-+ if(_core_if->core_no==0 && ifxusb_vbus1_status==0)
-+ {
-+ ifx_gpio_output_set(IFX_GPIO_USB_VBUS1,IFX_GPIO_MODULE_USB);
-+ ifxusb_vbus1_status=1;
-+ }
-+ #endif
-+ #if defined(IFX_GPIO_USB_VBUS2)
-+ if(_core_if->core_no==1 && ifxusb_vbus2_status==0)
-+ {
-+ ifx_gpio_output_set(IFX_GPIO_USB_VBUS2,IFX_GPIO_MODULE_USB);
-+ ifxusb_vbus2_status=1;
-+ }
-+ #endif
-+ }
-+ #endif //defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
-+ #else
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ ifxusb_vbus_status=1;
-+ //usb_set_vbus_on();
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ #if defined(__IS_AMAZON_SE__)
-+ set_bit (4, (volatile unsigned long *)AMAZON_SE_GPIO_P0_OUT);
-+ ifxusb_vbus_status=1;
-+ #endif //defined(__IS_AMAZON_SE__)
-+ #if defined(__IS_AR9__)
-+ if(_core_if->core_no==0)
-+ {
-+ if (bsp_port_reserve_pin(1, 13, PORT_MODULE_USB) != 0)
-+ {
-+ IFX_PRINT("Can't enable USB1 5.5V power!!\n");
-+ return;
-+ }
-+ bsp_port_clear_altsel0(1, 13, PORT_MODULE_USB);
-+ bsp_port_clear_altsel1(1, 13, PORT_MODULE_USB);
-+ bsp_port_set_dir_out(1, 13, PORT_MODULE_USB);
-+ bsp_port_set_pudsel(1, 13, PORT_MODULE_USB);
-+ bsp_port_set_puden(1, 13, PORT_MODULE_USB);
-+ bsp_port_set_output(1, 13, PORT_MODULE_USB);
-+ IFX_DEBUGP("Enable USB1 power!!\n");
-+ ifxusb_vbus1_status=1;
-+ }
-+ else
-+ {
-+ if (bsp_port_reserve_pin(3, 4, PORT_MODULE_USB) != 0)
-+ {
-+ IFX_PRINT("Can't enable USB2 5.5V power!!\n");
-+ return;
-+ }
-+ bsp_port_clear_altsel0(3, 4, PORT_MODULE_USB);
-+ bsp_port_clear_altsel1(3, 4, PORT_MODULE_USB);
-+ bsp_port_set_dir_out(3, 4, PORT_MODULE_USB);
-+ bsp_port_set_pudsel(3, 4, PORT_MODULE_USB);
-+ bsp_port_set_puden(3, 4, PORT_MODULE_USB);
-+ bsp_port_set_output(3, 4, PORT_MODULE_USB);
-+ IFX_DEBUGP("Enable USB2 power!!\n");
-+ ifxusb_vbus2_status=1;
-+ }
-+ #endif //defined(__IS_AR9__)
-+ #if defined(__IS_VR9__)
-+ if(_core_if->core_no==0)
-+ {
-+ ifxusb_vbus1_status=1;
-+ }
-+ else
-+ {
-+ ifxusb_vbus2_status=1;
-+ }
-+ #endif //defined(__IS_VR9__)
-+ #endif //defined(__UEIP__)
-+}
-+
-+
-+/*!
-+ \brief Turn off the USB 5V VBus Power
-+ \param _core_if Pointer of core_if structure
-+ */
-+void ifxusb_vbus_off(ifxusb_core_if_t *_core_if)
-+{
-+ IFX_DEBUGP("SENDING VBus POWER OFF\n");
-+
-+ #if defined(__UEIP__)
-+ #if defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
-+ if ( g_usb_vbus_trigger && ifxusb_vbus_status==1)
-+ {
-+ ifx_led_trigger_deactivate(g_usb_vbus_trigger);
-+ IFX_DEBUGP("Disable USB power!!\n");
-+ ifxusb_vbus_status=0;
-+ }
-+ #endif
-+ #if defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
-+ if(_core_if->core_no==0 && g_usb_vbus1_trigger && ifxusb_vbus1_status==1)
-+ {
-+ ifx_led_trigger_deactivate(g_usb_vbus1_trigger);
-+ IFX_DEBUGP("Disable USB1 power!!\n");
-+ ifxusb_vbus1_status=0;
-+ }
-+ #endif
-+ #if defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
-+ if(_core_if->core_no==1 && g_usb_vbus2_trigger && ifxusb_vbus2_status==1)
-+ {
-+ ifx_led_trigger_deactivate(g_usb_vbus2_trigger);
-+ IFX_DEBUGP("Disable USB2 power!!\n");
-+ ifxusb_vbus2_status=0;
-+ }
-+ #endif
-+
-+ #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
-+ if(ifxusb_vbus_gpio_inited)
-+ {
-+ #if defined(IFX_GPIO_USB_VBUS)
-+ if(ifxusb_vbus_status==1)
-+ {
-+ ifx_gpio_output_clear(IFX_GPIO_USB_VBUS,IFX_GPIO_MODULE_USB);
-+ ifxusb_vbus_status=0;
-+ }
-+ #endif
-+ #if defined(IFX_GPIO_USB_VBUS1)
-+ if(_core_if->core_no==0 && ifxusb_vbus1_status==1)
-+ {
-+ ifx_gpio_output_clear(IFX_GPIO_USB_VBUS1,IFX_GPIO_MODULE_USB);
-+ ifxusb_vbus1_status=0;
-+ }
-+ #endif
-+ #if defined(IFX_GPIO_USB_VBUS2)
-+ if(_core_if->core_no==1 && ifxusb_vbus2_status==1)
-+ {
-+ ifx_gpio_output_clear(IFX_GPIO_USB_VBUS2,IFX_GPIO_MODULE_USB);
-+ ifxusb_vbus2_status=0;
-+ }
-+ #endif
-+ }
-+ #endif //defined(IFX_GPIO_USB_VBUS) || defined(IFX_GPIO_USB_VBUS1) || defined(IFX_GPIO_USB_VBUS2)
-+ #else
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ ifxusb_vbus_status=0;
-+ //usb_set_vbus_on();
-+ #endif //defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+ #if defined(__IS_AMAZON_SE__)
-+ clear_bit (4, (volatile unsigned long *)AMAZON_SE_GPIO_P0_OUT);
-+ ifxusb_vbus_status=0;
-+ #endif //defined(__IS_AMAZON_SE__)
-+ #if defined(__IS_AR9__)
-+ if(_core_if->core_no==0)
-+ {
-+ if (bsp_port_reserve_pin(1, 13, PORT_MODULE_USB) != 0) {
-+ IFX_PRINT("Can't Disable USB1 5.5V power!!\n");
-+ return;
-+ }
-+ bsp_port_clear_altsel0(1, 13, PORT_MODULE_USB);
-+ bsp_port_clear_altsel1(1, 13, PORT_MODULE_USB);
-+ bsp_port_set_dir_out(1, 13, PORT_MODULE_USB);
-+ bsp_port_set_pudsel(1, 13, PORT_MODULE_USB);
-+ bsp_port_set_puden(1, 13, PORT_MODULE_USB);
-+ bsp_port_clear_output(1, 13, PORT_MODULE_USB);
-+ IFX_DEBUGP("Disable USB1 power!!\n");
-+ ifxusb_vbus1_status=0;
-+ }
-+ else
-+ {
-+ if (bsp_port_reserve_pin(3, 4, PORT_MODULE_USB) != 0) {
-+ IFX_PRINT("Can't Disable USB2 5.5V power!!\n");
-+ return;
-+ }
-+ bsp_port_clear_altsel0(3, 4, PORT_MODULE_USB);
-+ bsp_port_clear_altsel1(3, 4, PORT_MODULE_USB);
-+ bsp_port_set_dir_out(3, 4, PORT_MODULE_USB);
-+ bsp_port_set_pudsel(3, 4, PORT_MODULE_USB);
-+ bsp_port_set_puden(3, 4, PORT_MODULE_USB);
-+ bsp_port_clear_output(3, 4, PORT_MODULE_USB);
-+ IFX_DEBUGP("Disable USB2 power!!\n");
-+
-+ ifxusb_vbus2_status=0;
-+ }
-+ #endif //defined(__IS_AR9__)
-+ #if defined(__IS_VR9__)
-+ if(_core_if->core_no==0)
-+ {
-+ ifxusb_vbus1_status=0;
-+ }
-+ else
-+ {
-+ ifxusb_vbus2_status=0;
-+ }
-+ #endif //defined(__IS_VR9__)
-+ #endif //defined(__UEIP__)
-+}
-+
-+
-+
-+/*!
-+ \brief Read Current VBus status
-+ \param _core_if Pointer of core_if structure
-+ */
-+int ifxusb_vbus(ifxusb_core_if_t *_core_if)
-+{
-+#if defined(__UEIP__)
-+ #if defined(IFX_GPIO_USB_VBUS) || defined(IFX_LEDGPIO_USB_VBUS) || defined(IFX_LEDLED_USB_VBUS)
-+ return (ifxusb_vbus_status);
-+ #endif
-+
-+ #if defined(IFX_GPIO_USB_VBUS1) || defined(IFX_LEDGPIO_USB_VBUS1) || defined(IFX_LEDLED_USB_VBUS1)
-+ if(_core_if->core_no==0)
-+ return (ifxusb_vbus1_status);
-+ #endif
-+
-+ #if defined(IFX_GPIO_USB_VBUS2) || defined(IFX_LEDGPIO_USB_VBUS2) || defined(IFX_LEDLED_USB_VBUS2)
-+ if(_core_if->core_no==1)
-+ return (ifxusb_vbus2_status);
-+ #endif
-+#else //defined(__UEIP__)
-+#endif
-+ return -1;
-+}
-+
-+#if defined(__UEIP__)
-+#else
-+ #if defined(__IS_TWINPASS__)
-+ #define ADSL_BASE 0x20000
-+ #define CRI_BASE 0x31F00
-+ #define CRI_CCR0 CRI_BASE + 0x00
-+ #define CRI_CCR1 CRI_BASE + 0x01*4
-+ #define CRI_CDC0 CRI_BASE + 0x02*4
-+ #define CRI_CDC1 CRI_BASE + 0x03*4
-+ #define CRI_RST CRI_BASE + 0x04*4
-+ #define CRI_MASK0 CRI_BASE + 0x05*4
-+ #define CRI_MASK1 CRI_BASE + 0x06*4
-+ #define CRI_MASK2 CRI_BASE + 0x07*4
-+ #define CRI_STATUS0 CRI_BASE + 0x08*4
-+ #define CRI_STATUS1 CRI_BASE + 0x09*4
-+ #define CRI_STATUS2 CRI_BASE + 0x0A*4
-+ #define CRI_AMASK0 CRI_BASE + 0x0B*4
-+ #define CRI_AMASK1 CRI_BASE + 0x0C*4
-+ #define CRI_UPDCTL CRI_BASE + 0x0D*4
-+ #define CRI_MADST CRI_BASE + 0x0E*4
-+ // 0x0f is missing
-+ #define CRI_EVENT0 CRI_BASE + 0x10*4
-+ #define CRI_EVENT1 CRI_BASE + 0x11*4
-+ #define CRI_EVENT2 CRI_BASE + 0x12*4
-+
-+ #define IRI_I_ENABLE 0x32000
-+ #define STY_SMODE 0x3c004
-+ #define AFE_TCR_0 0x3c0dc
-+ #define AFE_ADDR_ADDR 0x3c0e8
-+ #define AFE_RDATA_ADDR 0x3c0ec
-+ #define AFE_WDATA_ADDR 0x3c0f0
-+ #define AFE_CONFIG 0x3c0f4
-+ #define AFE_SERIAL_CFG 0x3c0fc
-+
-+ #define DFE_BASE_ADDR 0xBE116000
-+ //#define DFE_BASE_ADDR 0x9E116000
-+
-+ #define MEI_FR_ARCINT_C (DFE_BASE_ADDR + 0x0000001C)
-+ #define MEI_DBG_WADDR_C (DFE_BASE_ADDR + 0x00000024)
-+ #define MEI_DBG_RADDR_C (DFE_BASE_ADDR + 0x00000028)
-+ #define MEI_DBG_DATA_C (DFE_BASE_ADDR + 0x0000002C)
-+ #define MEI_DBG_DECO_C (DFE_BASE_ADDR + 0x00000030)
-+ #define MEI_DBG_MASTER_C (DFE_BASE_ADDR + 0x0000003C)
-+
-+ static void WriteARCmem(uint32_t addr, uint32_t data)
-+ {
-+ writel(1 ,(volatile uint32_t *)MEI_DBG_MASTER_C);
-+ writel(1 ,(volatile uint32_t *)MEI_DBG_DECO_C );
-+ writel(addr ,(volatile uint32_t *)MEI_DBG_WADDR_C );
-+ writel(data ,(volatile uint32_t *)MEI_DBG_DATA_C );
-+ while( (ifxusb_rreg((volatile uint32_t *)MEI_FR_ARCINT_C) & 0x20) != 0x20 ){};
-+ writel(0 ,(volatile uint32_t *)MEI_DBG_MASTER_C);
-+ IFX_DEBUGP("WriteARCmem %08x %08x\n",addr,data);
-+ };
-+
-+ static uint32_t ReadARCmem(uint32_t addr)
-+ {
-+ u32 data;
-+ writel(1 ,(volatile uint32_t *)MEI_DBG_MASTER_C);
-+ writel(1 ,(volatile uint32_t *)MEI_DBG_DECO_C );
-+ writel(addr ,(volatile uint32_t *)MEI_DBG_RADDR_C );
-+ while( (ifxusb_rreg((volatile uint32_t *)MEI_FR_ARCINT_C) & 0x20) != 0x20 ){};
-+ data = ifxusb_rreg((volatile uint32_t *)MEI_DBG_DATA_C );
-+ writel(0 ,(volatile uint32_t *)MEI_DBG_MASTER_C);
-+ IFX_DEBUGP("ReadARCmem %08x %08x\n",addr,data);
-+ return data;
-+ };
-+
-+ void ifxusb_enable_afe_oc(void)
-+ {
-+ /* Start the clock */
-+ WriteARCmem(CRI_UPDCTL ,0x00000008);
-+ WriteARCmem(CRI_CCR0 ,0x00000014);
-+ WriteARCmem(CRI_CCR1 ,0x00000500);
-+ WriteARCmem(AFE_CONFIG ,0x000001c8);
-+ WriteARCmem(AFE_SERIAL_CFG,0x00000016); // (DANUBE_PCI_CFG_BASE+(1<<addrline))AFE serial interface clock & data latch edge
-+ WriteARCmem(AFE_TCR_0 ,0x00000002);
-+ //Take afe out of reset
-+ WriteARCmem(AFE_CONFIG ,0x000000c0);
-+ WriteARCmem(IRI_I_ENABLE ,0x00000101);
-+ WriteARCmem(STY_SMODE ,0x00001980);
-+
-+ ReadARCmem(CRI_UPDCTL );
-+ ReadARCmem(CRI_CCR0 );
-+ ReadARCmem(CRI_CCR1 );
-+ ReadARCmem(AFE_CONFIG );
-+ ReadARCmem(AFE_SERIAL_CFG); // (DANUBE_PCI_CFG_BASE+(1<<addrline))AFE serial interface clock & data latch edge
-+ ReadARCmem(AFE_TCR_0 );
-+ ReadARCmem(AFE_CONFIG );
-+ ReadARCmem(IRI_I_ENABLE );
-+ ReadARCmem(STY_SMODE );
-+ }
-+ #endif //defined(__IS_TWINPASS__)
-+#endif //defined(__UEIP__)
-+
-+
---- /dev/null
-+++ b/drivers/usb/ifxhcd/ifxusb_ctl.c
-@@ -0,0 +1,1385 @@
-+/*****************************************************************************
-+ ** FILE NAME : ifxusb_ctl.c
-+ ** PROJECT : IFX USB sub-system V3
-+ ** MODULES : IFX USB sub-system Host and Device driver
-+ ** SRC VERSION : 1.0
-+ ** DATE : 1/Jan/2009
-+ ** AUTHOR : Chen, Howard
-+ ** DESCRIPTION : Implementing the procfs and sysfs for IFX USB driver
-+ *****************************************************************************/
-+
-+/*! \file ifxusb_ctl.c
-+ \ingroup IFXUSB_DRIVER_V3
-+ \brief Implementing the procfs and sysfs for IFX USB driver
-+*/
-+
-+#include <linux/version.h>
-+#include "ifxusb_version.h"
-+
-+
-+#include <linux/proc_fs.h>
-+#include <asm/byteorder.h>
-+#include <asm/unaligned.h>
-+#include <asm/uaccess.h>
-+
-+#include "ifxusb_plat.h"
-+#include "ifxusb_regs.h"
-+#include "ifxusb_cif.h"
-+
-+#ifdef __IS_DEVICE__
-+ #include "ifxpcd.h"
-+#endif
-+
-+#ifdef __IS_HOST__
-+ #include "ifxhcd.h"
-+#endif
-+
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/gfp.h>
-+
-+
-+#ifdef __IS_HOST__
-+ extern char ifxusb_driver_name[];
-+
-+ #ifdef __IS_DUAL__
-+ extern ifxhcd_hcd_t ifxusb_hcd_1;
-+ extern ifxhcd_hcd_t ifxusb_hcd_2;
-+ extern char ifxusb_hcd_name_1[];
-+ extern char ifxusb_hcd_name_2[];
-+ #else
-+ extern ifxhcd_hcd_t ifxusb_hcd;
-+ extern char ifxusb_hcd_name[];
-+ #endif
-+
-+#endif
-+
-+#ifdef __IS_DEVICE__
-+ extern char ifxusb_driver_name[];
-+
-+ extern ifxpcd_pcd_t ifxusb_pcd;
-+ extern char ifxusb_pcd_name[];
-+#endif
-+
-+
-+//Attributes for sysfs (for 2.6 only)
-+
-+extern struct device_attribute dev_attr_dbglevel;
-+
-+#ifdef __IS_DUAL__
-+ extern struct device_attribute dev_attr_dump_params_1;
-+ extern struct device_attribute dev_attr_dump_params_2;
-+#else
-+ extern struct device_attribute dev_attr_dump_params;
-+#endif
-+
-+#ifdef __IS_DUAL__
-+ extern struct device_attribute dev_attr_mode_1;
-+ extern struct device_attribute dev_attr_mode_2;
-+#else
-+ extern struct device_attribute dev_attr_mode;
-+#endif
-+
-+#ifdef __IS_HOST__
-+ #ifdef __IS_DUAL__
-+ extern struct device_attribute dev_attr_buspower_1;
-+ extern struct device_attribute dev_attr_buspower_2;
-+ extern struct device_attribute dev_attr_bussuspend_1;
-+ extern struct device_attribute dev_attr_bussuspend_2;
-+ extern struct device_attribute dev_attr_busconnected_1;
-+ extern struct device_attribute dev_attr_busconnected_2;
-+ extern struct device_attribute dev_attr_connectspeed_1;
-+ extern struct device_attribute dev_attr_connectspeed_1;
-+ #else
-+ extern struct device_attribute dev_attr_buspower;
-+ extern struct device_attribute dev_attr_bussuspend;
-+ extern struct device_attribute dev_attr_busconnected;
-+ extern struct device_attribute dev_attr_connectspeed;
-+ #endif
-+#endif //__IS_HOST__
-+
-+#ifdef __IS_DEVICE__
-+ extern struct device_attribute dev_attr_devspeed;
-+ extern struct device_attribute dev_attr_enumspeed;
-+#endif //__IS_DEVICE__
-+
-+#ifdef __ENABLE_DUMP__
-+ #ifdef __IS_DUAL__
-+ extern struct device_attribute dev_attr_dump_reg_1;
-+ extern struct device_attribute dev_attr_dump_reg_2;
-+ extern struct device_attribute dev_attr_dump_spram_1;
-+ extern struct device_attribute dev_attr_dump_spram_2;
-+ #ifdef __IS_HOST__
-+ extern struct device_attribute dev_attr_dump_host_state_1;
-+ extern struct device_attribute dev_attr_dump_host_state_2;
-+ #else
-+ #endif
-+ #else
-+ extern struct device_attribute dev_attr_dump_reg;
-+ extern struct device_attribute dev_attr_dump_spram;
-+ #ifdef __IS_HOST__
-+ extern struct device_attribute dev_attr_dump_host_state;
-+ #else
-+ #endif
-+ #endif
-+#endif //__ENABLE_DUMP__
-+
-+
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+static ssize_t procfs_dbglevel_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+{
-+ #ifdef __IS_HOST__
-+ return sprintf( buf, "%08X\n",h_dbg_lvl );
-+ #else
-+ return sprintf( buf, "%08X\n",d_dbg_lvl );
-+ #endif
-+}
-+
-+static ssize_t procfs_dbglevel_store(struct file *file, const char *buffer, unsigned long count, void *data)
-+{
-+ char buf[10];
-+ int i = 0;
-+ uint32_t value;
-+ if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
-+ return -EFAULT;
-+ value = simple_strtoul(buf, NULL, 16);
-+ #ifdef __IS_HOST__
-+ h_dbg_lvl =value;
-+ #else
-+ d_dbg_lvl =value;
-+ #endif
-+ //turn on and off power
-+ return count;
-+}
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_dbglevel_show( struct device *_dev, struct device_attribute *attr,char *buf)
-+#else
-+ static ssize_t sysfs_dbglevel_show( struct device *_dev, char *buf)
-+#endif
-+{
-+ #ifdef __IS_HOST__
-+ return sprintf( buf, "%08X\n",h_dbg_lvl );
-+ #else
-+ return sprintf( buf, "%08X\n",d_dbg_lvl );
-+ #endif
-+}
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_dbglevel_store( struct device *_dev, struct device_attribute *attr,const char *buffer, size_t count )
-+#else
-+ static ssize_t sysfs_dbglevel_store( struct device *_dev, const char *buffer, size_t count )
-+#endif
-+{
-+ char buf[10];
-+ int i = 0;
-+ uint32_t value;
-+ if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
-+ return -EFAULT;
-+ value = simple_strtoul(buf, NULL, 16);
-+ #ifdef __IS_HOST__
-+ h_dbg_lvl =value;
-+ #else
-+ d_dbg_lvl =value;
-+ #endif
-+ //turn on and off power
-+ return count;
-+}
-+
-+DEVICE_ATTR(dbglevel, S_IRUGO|S_IWUSR, sysfs_dbglevel_show, sysfs_dbglevel_store);
-+
-+
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+static void ifxusb_dump_params(ifxusb_core_if_t *_core_if);
-+
-+#ifdef __IS_DUAL__
-+ static void dump_params_1(void)
-+ {
-+ ifxusb_dump_params(&ifxusb_hcd_1.core_if);
-+ }
-+ static void dump_params_2(void)
-+ {
-+ ifxusb_dump_params(&ifxusb_hcd_2.core_if);
-+ }
-+
-+ static ssize_t procfs_dump_params_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ dump_params_1();
-+ return 0;
-+ }
-+ static ssize_t procfs_dump_params_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ dump_params_2();
-+ return 0;
-+ }
-+
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_dump_params_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_dump_params_show_1( struct device *_dev,char *buf)
-+ #endif
-+ {
-+ dump_params_1();
-+ return 0;
-+ }
-+ DEVICE_ATTR(dump_params_1, S_IRUGO|S_IWUSR, sysfs_dump_params_show_1, NULL);
-+
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_dump_params_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_dump_params_show_2( struct device *_dev,char *buf)
-+ #endif
-+ {
-+ dump_params_2();
-+ return 0;
-+ }
-+
-+ DEVICE_ATTR(dump_params_2, S_IRUGO|S_IWUSR, sysfs_dump_params_show_2, NULL);
-+#else
-+ static void dump_params(void)
-+ {
-+ #ifdef __IS_HOST__
-+ ifxusb_dump_params(&ifxusb_hcd.core_if);
-+ #else
-+ ifxusb_dump_params(&ifxusb_pcd.core_if);
-+ #endif
-+ }
-+
-+ static ssize_t procfs_dump_params_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ dump_params();
-+ return 0;
-+ }
-+
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_dump_params_show( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_dump_params_show( struct device *_dev,char *buf)
-+ #endif
-+ {
-+ dump_params();
-+ return 0;
-+ }
-+ DEVICE_ATTR(dump_params, S_IRUGO|S_IWUSR, sysfs_dump_params_show, NULL);
-+#endif
-+
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+#ifdef __IS_DUAL__
-+ static ssize_t mode_show_1(char *buf)
-+ {
-+ if((ifxusb_rreg(&ifxusb_hcd_1.core_if.core_global_regs->gintsts ) & 0x1) == 1)
-+ return sprintf( buf, "HOST\n" );
-+ else
-+ return sprintf( buf, "DEVICE(INCORRECT!)\n" );
-+ }
-+
-+ static ssize_t mode_show_2(char *buf)
-+ {
-+ if((ifxusb_rreg(&ifxusb_hcd_2.core_if.core_global_regs->gintsts ) & 0x1) == 1)
-+ return sprintf( buf, "HOST\n" );
-+ else
-+ return sprintf( buf, "DEVICE(INCORRECT!)\n" );
-+ }
-+
-+ static ssize_t procfs_mode_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ return mode_show_1(buf);
-+ }
-+ static ssize_t procfs_mode_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ return mode_show_2(buf);
-+ }
-+
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_mode_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_mode_show_1( struct device *_dev,char *buf)
-+ #endif
-+ {
-+ return mode_show_1(buf);
-+ }
-+
-+ DEVICE_ATTR(mode_1, S_IRUGO|S_IWUSR, sysfs_mode_show_1, 0);
-+
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_mode_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_mode_show_2( struct device *_dev,char *buf)
-+ #endif
-+ {
-+ return mode_show_2(buf);
-+ }
-+ DEVICE_ATTR(mode_2, S_IRUGO|S_IWUSR, sysfs_mode_show_2, NULL);
-+#else
-+ static ssize_t mode_show(char *buf)
-+ {
-+ #ifdef __IS_HOST__
-+ if((ifxusb_rreg(&ifxusb_hcd.core_if.core_global_regs->gintsts ) & 0x1) == 1)
-+ return sprintf( buf, "HOST\n" );
-+ else
-+ return sprintf( buf, "DEVICE(INCORRECT!)\n" );
-+ #else
-+ if((ifxusb_rreg(&ifxusb_pcd.core_if.core_global_regs->gintsts ) & 0x1) != 1)
-+ return sprintf( buf, "DEVICE\n" );
-+ else
-+ return sprintf( buf, "HOST(INCORRECT!)\n" );
-+ #endif
-+ }
-+ static ssize_t procfs_mode_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ return mode_show(buf);
-+ }
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_mode_show( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_mode_show( struct device *_dev, char *buf)
-+ #endif
-+ {
-+ return mode_show(buf);
-+ }
-+ DEVICE_ATTR(mode, S_IRUGO|S_IWUSR, sysfs_mode_show, NULL);
-+#endif
-+
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+#ifdef __IS_HOST__
-+ #ifdef __IS_DUAL__
-+ static ssize_t buspower_show_1(char *buf)
-+ {
-+ if(ifxusb_vbus (&ifxusb_hcd_1.core_if)==1) return sprintf( buf, "1\n" );
-+ if(ifxusb_vbus (&ifxusb_hcd_1.core_if)==0) return sprintf( buf, "0\n" );
-+ return sprintf( buf, "UNKNOWN\n" );
-+ }
-+ static void buspower_store_1(uint32_t value)
-+ {
-+ if (value==1) ifxusb_vbus_on (&ifxusb_hcd_1.core_if);
-+ else if(value==0) ifxusb_vbus_off(&ifxusb_hcd_1.core_if);
-+ }
-+ static ssize_t buspower_show_2(char *buf)
-+ {
-+ if(ifxusb_vbus (&ifxusb_hcd_2.core_if)==1) return sprintf( buf, "1\n" );
-+ if(ifxusb_vbus (&ifxusb_hcd_2.core_if)==0) return sprintf( buf, "0\n" );
-+ return sprintf( buf, "UNKNOWN\n" );
-+ }
-+ static void buspower_store_2(uint32_t value)
-+ {
-+ if (value==1) ifxusb_vbus_on (&ifxusb_hcd_2.core_if);
-+ else if(value==0) ifxusb_vbus_off(&ifxusb_hcd_2.core_if);
-+ }
-+ static ssize_t procfs_buspower_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ return buspower_show_1(buf);
-+ }
-+ static ssize_t procfs_buspower_store_1(struct file *file, const char *buffer, unsigned long count, void *data)
-+ {
-+ char buf[10];
-+ int i = 0;
-+ uint32_t value;
-+ if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
-+ return -EFAULT;
-+ value = simple_strtoul(buf, NULL, 16);
-+ buspower_store_1(value);
-+ return count;
-+ }
-+ static ssize_t procfs_buspower_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ return buspower_show_2(buf);
-+ }
-+ static ssize_t procfs_buspower_store_2(struct file *file, const char *buffer, unsigned long count, void *data)
-+ {
-+ char buf[10];
-+ int i = 0;
-+ uint32_t value;
-+ if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
-+ return -EFAULT;
-+ value = simple_strtoul(buf, NULL, 16);
-+ buspower_store_2(value);
-+ return count;
-+ }
-+
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_buspower_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_buspower_show_1( struct device *_dev,char *buf)
-+ #endif
-+ {
-+ return buspower_show_1(buf);
-+ }
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_buspower_store_1( struct device *_dev, struct device_attribute *attr,const char *buffer, size_t count )
-+ #else
-+ static ssize_t sysfs_buspower_store_1( struct device *_dev, const char *buffer, size_t count )
-+ #endif
-+ {
-+ char buf[10];
-+ int i = 0;
-+ uint32_t value;
-+ if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
-+ return -EFAULT;
-+ value = simple_strtoul(buf, NULL, 16);
-+ buspower_store_1(value);
-+ return count;
-+ }
-+ DEVICE_ATTR(buspower_1, S_IRUGO|S_IWUSR, sysfs_buspower_show_1, sysfs_buspower_store_1);
-+
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_buspower_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_buspower_show_2( struct device *_dev,char *buf)
-+ #endif
-+ {
-+ return buspower_show_2(buf);
-+ }
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_buspower_store_2( struct device *_dev, struct device_attribute *attr,const char *buffer, size_t count )
-+ #else
-+ static ssize_t sysfs_buspower_store_2( struct device *_dev, const char *buffer, size_t count )
-+ #endif
-+ {
-+ char buf[10];
-+ int i = 0;
-+ uint32_t value;
-+ if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
-+ return -EFAULT;
-+ value = simple_strtoul(buf, NULL, 16);
-+ buspower_store_2(value);
-+ return count;
-+ }
-+ DEVICE_ATTR(buspower_2, S_IRUGO|S_IWUSR, sysfs_buspower_show_2, sysfs_buspower_store_2);
-+ #else
-+ static ssize_t buspower_show(char *buf)
-+ {
-+ if(ifxusb_vbus (&ifxusb_hcd.core_if)==1) return sprintf( buf, "1\n" );
-+ if(ifxusb_vbus (&ifxusb_hcd.core_if)==0) return sprintf( buf, "0\n" );
-+ return sprintf( buf, "UNKNOWN\n" );
-+ }
-+ static void buspower_store(uint32_t value)
-+ {
-+ if (value==1) ifxusb_vbus_on (&ifxusb_hcd.core_if);
-+ else if(value==0) ifxusb_vbus_off(&ifxusb_hcd.core_if);
-+ }
-+ static ssize_t procfs_buspower_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ return buspower_show(buf);
-+ }
-+ static ssize_t procfs_buspower_store(struct file *file, const char *buffer, unsigned long count, void *data)
-+ {
-+ char buf[10];
-+ int i = 0;
-+ uint32_t value;
-+ if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
-+ return -EFAULT;
-+ value = simple_strtoul(buf, NULL, 16);
-+ buspower_store(value);
-+ return count;
-+ }
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_buspower_show( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_buspower_show( struct device *_dev, char *buf)
-+ #endif
-+ {
-+ return buspower_show(buf);
-+ }
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_buspower_store( struct device *_dev, struct device_attribute *attr,const char *buffer, size_t count )
-+ #else
-+ static ssize_t sysfs_buspower_store( struct device *_dev, const char *buffer, size_t count )
-+ #endif
-+ {
-+ char buf[10];
-+ int i = 0;
-+ uint32_t value;
-+ if (copy_from_user(buf, &buffer[i], sizeof("0xFFFFFFFF\n")+1))
-+ return -EFAULT;
-+ value = simple_strtoul(buf, NULL, 16);
-+ buspower_store(value);
-+ return count;
-+ }
-+ DEVICE_ATTR(buspower, S_IRUGO|S_IWUSR, sysfs_buspower_show, sysfs_buspower_store);
-+ #endif
-+
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+
-+ #ifdef __IS_DUAL__
-+ static ssize_t bussuspend_show_1(char *buf)
-+ {
-+ hprt0_data_t val;
-+ val.d32 = ifxusb_rreg(ifxusb_hcd_1.core_if.hprt0);
-+ return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp);
-+ }
-+ static ssize_t bussuspend_show_2(char *buf)
-+ {
-+ hprt0_data_t val;
-+ val.d32 = ifxusb_rreg(ifxusb_hcd_2.core_if.hprt0);
-+ return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp);
-+ }
-+
-+ static ssize_t procfs_bussuspend_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ return bussuspend_show_1(buf);
-+ }
-+ static ssize_t procfs_bussuspend_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ return bussuspend_show_2(buf);
-+ }
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_bussuspend_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_bussuspend_show_1( struct device *_dev,char *buf)
-+ #endif
-+ {
-+ return bussuspend_show_1(buf);
-+ }
-+ DEVICE_ATTR(bussuspend_1, S_IRUGO|S_IWUSR, sysfs_bussuspend_show_1, 0);
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_bussuspend_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_bussuspend_show_2( struct device *_dev,char *buf)
-+ #endif
-+ {
-+ return bussuspend_show_2(buf);
-+ }
-+ DEVICE_ATTR(bussuspend_2, S_IRUGO|S_IWUSR, sysfs_bussuspend_show_2, 0);
-+ #else
-+ static ssize_t bussuspend_show(char *buf)
-+ {
-+ hprt0_data_t val;
-+ val.d32 = ifxusb_rreg(ifxusb_hcd.core_if.hprt0);
-+ return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp);
-+ }
-+ static ssize_t procfs_bussuspend_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ return bussuspend_show(buf);
-+ }
-+
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_bussuspend_show( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_bussuspend_show( struct device *_dev, char *buf)
-+ #endif
-+ {
-+ return bussuspend_show(buf);
-+ }
-+ DEVICE_ATTR(bussuspend, S_IRUGO|S_IWUSR, sysfs_bussuspend_show, 0);
-+ #endif
-+
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+ #ifdef __IS_DUAL__
-+ static ssize_t busconnected_show_1(char *buf)
-+ {
-+ hprt0_data_t val;
-+ val.d32 = ifxusb_rreg(ifxusb_hcd_1.core_if.hprt0);
-+ return sprintf (buf, "Bus Connected = 0x%x\n", val.b.prtconnsts);
-+ }
-+ static ssize_t busconnected_show_2(char *buf)
-+ {
-+ hprt0_data_t val;
-+ val.d32 = ifxusb_rreg(ifxusb_hcd_2.core_if.hprt0);
-+ return sprintf (buf, "Bus Connected = 0x%x\n", val.b.prtconnsts);
-+ }
-+
-+ static ssize_t procfs_busconnected_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ return busconnected_show_1(buf);
-+ }
-+ static ssize_t procfs_busconnected_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ return busconnected_show_2(buf);
-+ }
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_busconnected_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_busconnected_show_1( struct device *_dev,char *buf)
-+ #endif
-+ {
-+ return busconnected_show_1(buf);
-+ }
-+ DEVICE_ATTR(busconnected_1, S_IRUGO|S_IWUSR, sysfs_busconnected_show_1, 0);
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_busconnected_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_busconnected_show_2( struct device *_dev,char *buf)
-+ #endif
-+ {
-+ return busconnected_show_2(buf);
-+ }
-+ DEVICE_ATTR(busconnected_2, S_IRUGO|S_IWUSR, sysfs_busconnected_show_2, 0);
-+ #else
-+ static ssize_t busconnected_show(char *buf)
-+ {
-+ hprt0_data_t val;
-+ val.d32 = ifxusb_rreg(ifxusb_hcd.core_if.hprt0);
-+ return sprintf (buf, "Bus Connected = 0x%x\n", val.b.prtconnsts);
-+ }
-+ static ssize_t procfs_busconnected_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ return busconnected_show(buf);
-+ }
-+
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_busconnected_show( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_busconnected_show( struct device *_dev, char *buf)
-+ #endif
-+ {
-+ return busconnected_show(buf);
-+ }
-+ DEVICE_ATTR(busconnected, S_IRUGO|S_IWUSR, sysfs_busconnected_show, 0);
-+ #endif
-+
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+ #ifdef __IS_DUAL__
-+ static ssize_t connectspeed_show_1(char *buf)
-+ {
-+ hprt0_data_t val;
-+ val.d32 = ifxusb_rreg(ifxusb_hcd_1.core_if.hprt0);
-+ if( val.b.prtspd ==0) return sprintf (buf, "Bus Speed = High (%d)\n", val.b.prtspd);
-+ if( val.b.prtspd ==1) return sprintf (buf, "Bus Speed = Full (%d)\n", val.b.prtspd);
-+ if( val.b.prtspd ==2) return sprintf (buf, "Bus Speed = Low (%d)\n", val.b.prtspd);
-+ return sprintf (buf, "Bus Speed = Unknown (%d)\n", val.b.prtspd);
-+ }
-+ static ssize_t connectspeed_show_2(char *buf)
-+ {
-+ hprt0_data_t val;
-+ val.d32 = ifxusb_rreg(ifxusb_hcd_2.core_if.hprt0);
-+ if( val.b.prtspd ==0) return sprintf (buf, "Bus Speed = High (%d)\n", val.b.prtspd);
-+ if( val.b.prtspd ==1) return sprintf (buf, "Bus Speed = Full (%d)\n", val.b.prtspd);
-+ if( val.b.prtspd ==2) return sprintf (buf, "Bus Speed = Low (%d)\n", val.b.prtspd);
-+ return sprintf (buf, "Bus Speed = Unknown (%d)\n", val.b.prtspd);
-+ }
-+
-+ static ssize_t procfs_connectspeed_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ return connectspeed_show_1(buf);
-+ }
-+ static ssize_t procfs_connectspeed_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ return connectspeed_show_2(buf);
-+ }
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_connectspeed_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_connectspeed_show_1( struct device *_dev,char *buf)
-+ #endif
-+ {
-+ return connectspeed_show_1(buf);
-+ }
-+ DEVICE_ATTR(connectspeed_1, S_IRUGO|S_IWUSR, sysfs_connectspeed_show_1, 0);
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_connectspeed_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_connectspeed_show_2( struct device *_dev,char *buf)
-+ #endif
-+ {
-+ return connectspeed_show_2(buf);
-+ }
-+ DEVICE_ATTR(connectspeed_2, S_IRUGO|S_IWUSR, sysfs_connectspeed_show_2, 0);
-+ #else
-+ static ssize_t connectspeed_show(char *buf)
-+ {
-+ hprt0_data_t val;
-+ val.d32 = ifxusb_rreg(ifxusb_hcd.core_if.hprt0);
-+ if( val.b.prtspd ==0) return sprintf (buf, "Bus Speed = High (%d)\n", val.b.prtspd);
-+ if( val.b.prtspd ==1) return sprintf (buf, "Bus Speed = Full (%d)\n", val.b.prtspd);
-+ if( val.b.prtspd ==2) return sprintf (buf, "Bus Speed = Low (%d)\n", val.b.prtspd);
-+ return sprintf (buf, "Bus Speed = Unknown (%d)\n", val.b.prtspd);
-+ }
-+
-+ static ssize_t procfs_connectspeed_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ return connectspeed_show(buf);
-+ }
-+
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_connectspeed_show( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_connectspeed_show( struct device *_dev, char *buf)
-+ #endif
-+ {
-+ return connectspeed_show(buf);
-+ }
-+ DEVICE_ATTR(connectspeed, S_IRUGO|S_IWUSR, sysfs_connectspeed_show, 0);
-+ #endif
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+#endif
-+
-+
-+#ifdef __IS_DEVICE__
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+ static ssize_t devspeed_show(char *buf)
-+ {
-+ dcfg_data_t val;
-+ val.d32 = ifxusb_rreg(&ifxusb_pcd.core_if.dev_global_regs->dcfg);
-+ if( val.b.devspd ==0) return sprintf (buf, "Dev Speed = High (%d)\n", val.b.devspd);
-+ if( val.b.devspd ==1) return sprintf (buf, "Dev Speed = Full (%d)\n", val.b.devspd);
-+ if( val.b.devspd ==3) return sprintf (buf, "Dev Speed = Full (%d)\n", val.b.devspd);
-+ return sprintf (buf, "Dev Speed = Unknown (%d)\n", val.b.devspd);
-+ }
-+
-+ static ssize_t procfs_devspeed_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ return devspeed_show(buf);
-+ }
-+
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_devspeed_show( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_devspeed_show( struct device *_dev, char *buf)
-+ #endif
-+ {
-+ return devspeed_show(buf);
-+ }
-+ DEVICE_ATTR(devspeed, S_IRUGO|S_IWUSR, sysfs_devspeed_show, 0);
-+
-+ static ssize_t enumspeed_show(char *buf)
-+ {
-+ dsts_data_t val;
-+ val.d32 = ifxusb_rreg(&ifxusb_pcd.core_if.dev_global_regs->dsts);
-+ if( val.b.enumspd ==0) return sprintf (buf, "Enum Speed = High (%d)\n", val.b.enumspd);
-+ if( val.b.enumspd ==1) return sprintf (buf, "Enum Speed = Full (%d)\n", val.b.enumspd);
-+ if( val.b.enumspd ==2) return sprintf (buf, "Enum Speed = Low (%d)\n", val.b.enumspd);
-+ return sprintf (buf, "Enum Speed = invalid(%d)\n", val.b.enumspd);
-+ }
-+
-+ static ssize_t procfs_enumspeed_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ return enumspeed_show(buf);
-+ }
-+
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_enumspeed_show( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_enumspeed_show( struct device *_dev, char *buf)
-+ #endif
-+ {
-+ return enumspeed_show(buf);
-+ }
-+ DEVICE_ATTR(enumspeed, S_IRUGO|S_IWUSR, sysfs_enumspeed_show, 0);
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+#endif
-+
-+
-+//////////////////////////////////////////////////////////////////////////////////
-+#ifdef __ENABLE_DUMP__
-+
-+ #ifdef __IS_DUAL__
-+ static void dump_reg_1(void)
-+ {
-+ ifxusb_dump_registers(&ifxusb_hcd_1.core_if);
-+ }
-+ static void dump_reg_2(void)
-+ {
-+ ifxusb_dump_registers(&ifxusb_hcd_2.core_if);
-+ }
-+
-+ static ssize_t procfs_dump_reg_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ dump_reg_1();
-+ return 0;
-+ }
-+ static ssize_t procfs_dump_reg_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ dump_reg_2();
-+ return 0;
-+ }
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_dump_reg_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_dump_reg_show_1( struct device *_dev,char *buf)
-+ #endif
-+ {
-+ dump_reg_1();
-+ return 0;
-+ }
-+ DEVICE_ATTR(dump_reg_1, S_IRUGO|S_IWUSR, sysfs_dump_reg_show_1, 0);
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_dump_reg_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_dump_reg_show_2( struct device *_dev,char *buf)
-+ #endif
-+ {
-+ dump_reg_2();
-+ return 0;
-+ }
-+ DEVICE_ATTR(dump_reg_2, S_IRUGO|S_IWUSR, sysfs_dump_reg_show_2, 0);
-+ #else
-+ static void dump_reg(void)
-+ {
-+ #ifdef __IS_HOST__
-+ ifxusb_dump_registers(&ifxusb_hcd.core_if);
-+ #endif
-+ #ifdef __IS_DEVICE__
-+ ifxusb_dump_registers(&ifxusb_pcd.core_if);
-+ #endif
-+ }
-+ static ssize_t procfs_dump_reg_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ dump_reg();
-+ return 0;
-+ }
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_dump_reg_show( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_dump_reg_show( struct device *_dev,char *buf)
-+ #endif
-+ {
-+ dump_reg();
-+ return 0;
-+ }
-+ DEVICE_ATTR(dump_reg, S_IRUGO|S_IWUSR, sysfs_dump_reg_show, 0);
-+ #endif
-+
-+
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+ #ifdef __IS_DUAL__
-+ static void dump_spram_1(void)
-+ {
-+ ifxusb_dump_spram(&ifxusb_hcd_1.core_if);
-+ }
-+ static void dump_spram_2(void)
-+ {
-+ ifxusb_dump_spram(&ifxusb_hcd_2.core_if);
-+ }
-+
-+ static ssize_t procfs_dump_spram_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ dump_spram_1();
-+ return 0;
-+ }
-+ static ssize_t procfs_dump_spram_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ dump_spram_2();
-+ return 0;
-+ }
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_dump_spram_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_dump_spram_show_1( struct device *_dev,char *buf)
-+ #endif
-+ {
-+ dump_spram_1();
-+ return 0;
-+ }
-+ DEVICE_ATTR(dump_spram_1, S_IRUGO|S_IWUSR, sysfs_dump_spram_show_1, 0);
-+
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_dump_spram_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_dump_spram_show_2( struct device *_dev,char *buf)
-+ #endif
-+ {
-+ dump_spram_2();
-+ return 0;
-+ }
-+ DEVICE_ATTR(dump_spram_2, S_IRUGO|S_IWUSR, sysfs_dump_spram_show_2, 0);
-+ #else
-+ static void dump_spram(void)
-+ {
-+ #ifdef __IS_HOST__
-+ ifxusb_dump_spram(&ifxusb_hcd.core_if);
-+ #endif
-+ #ifdef __IS_DEVICE__
-+ ifxusb_dump_spram(&ifxusb_pcd.core_if);
-+ #endif
-+ }
-+ static ssize_t procfs_dump_spram_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ dump_spram();
-+ return 0;
-+ }
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_dump_spram_show( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_dump_spram_show( struct device *_dev,char *buf)
-+ #endif
-+ {
-+ dump_spram();
-+ return 0;
-+ }
-+ DEVICE_ATTR(dump_spram, S_IRUGO|S_IWUSR, sysfs_dump_spram_show, 0);
-+ #endif
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+ #ifdef __IS_HOST__
-+ #ifdef __IS_DUAL__
-+ static ssize_t procfs_dump_host_state_show_1(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ ifxhcd_dump_state(&ifxusb_hcd_1);
-+ return 0;
-+ }
-+ static ssize_t procfs_dump_host_state_show_2(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ ifxhcd_dump_state(&ifxusb_hcd_2);
-+ return 0;
-+ }
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_dump_host_state_show_1( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_dump_host_state_show_1( struct device *_dev,char *buf)
-+ #endif
-+ {
-+ ifxhcd_dump_state(&ifxusb_hcd_1);
-+ return 0;
-+ }
-+ DEVICE_ATTR(dump_host_state_1, S_IRUGO|S_IWUSR, sysfs_dump_host_state_show_1, 0);
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_dump_host_state_show_2( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_dump_host_state_show_2( struct device *_dev,char *buf)
-+ #endif
-+ {
-+ ifxhcd_dump_state(&ifxusb_hcd_2);
-+ return 0;
-+ }
-+ DEVICE_ATTR(dump_host_state_2, S_IRUGO|S_IWUSR, sysfs_dump_host_state_show_2, 0);
-+ #else
-+ static ssize_t procfs_dump_host_state_show(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-+ {
-+ ifxhcd_dump_state(&ifxusb_hcd);
-+ return 0;
-+ }
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ static ssize_t sysfs_dump_host_state_show( struct device *_dev, struct device_attribute *attr,char *buf)
-+ #else
-+ static ssize_t sysfs_dump_host_state_show( struct device *_dev,char *buf)
-+ #endif
-+ {
-+ ifxhcd_dump_state(&ifxusb_hcd);
-+ return 0;
-+ }
-+ DEVICE_ATTR(dump_host_state, S_IRUGO|S_IWUSR, sysfs_dump_host_state_show, 0);
-+ #endif
-+
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+/////////////////////////////////////////////////////////////////////////////////////////////////////
-+
-+ #endif //IS_HOST_
-+
-+#endif //__ENABLE_DUMP__
-+
-+//////////////////////////////////////////////////////////////////////////////////
-+
-+static int ifx_proc_addproc(char *funcname, read_proc_t *hookfuncr, write_proc_t *hookfuncw);
-+static void ifx_proc_delproc(char *funcname);
-+
-+//////////////////////////////////////////////////////////////////////////////////
-+
-+/*!
-+ \brief This function create the sysfs and procfs entries
-+ \param[in] _dev Pointer of device structure, if applied
-+ */
-+void ifxusb_attr_create (void *_dev)
-+{
-+ int error;
-+
-+ struct device *dev = (struct device *) _dev;
-+
-+ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-+ error = ifx_proc_addproc("dbglevel", procfs_dbglevel_show, procfs_dbglevel_store);
-+ error = device_create_file(dev, &dev_attr_dbglevel);
-+
-+ #ifdef __IS_DUAL__
-+ error = ifx_proc_addproc("dump_params_1", procfs_dump_params_show_1, NULL);
-+ error = ifx_proc_addproc("dump_params_2", procfs_dump_params_show_2, NULL);
-+ error = device_create_file(dev, &dev_attr_dump_params_1);
-+ error = device_create_file(dev, &dev_attr_dump_params_2);
-+ #else
-+ error = ifx_proc_addproc("dump_params", procfs_dump_params_show, NULL);
-+ error = device_create_file(dev, &dev_attr_dump_params);
-+ #endif
-+
-+ #ifdef __IS_DUAL__
-+ error = ifx_proc_addproc("mode_1", procfs_mode_show_1, NULL);
-+ error = ifx_proc_addproc("mode_2", procfs_mode_show_2, NULL);
-+ error = device_create_file(dev, &dev_attr_mode_1);
-+ error = device_create_file(dev, &dev_attr_mode_2);
-+ #else
-+ error = ifx_proc_addproc("mode", procfs_mode_show, NULL);
-+ error = device_create_file(dev, &dev_attr_mode);
-+ #endif
-+
-+ #ifdef __IS_HOST__
-+ #ifdef __IS_DUAL__
-+ error = ifx_proc_addproc("buspower_1", procfs_buspower_show_1, procfs_buspower_store_1);
-+ error = ifx_proc_addproc("buspower_2", procfs_buspower_show_2, procfs_buspower_store_2);
-+ error = device_create_file(dev, &dev_attr_buspower_1);
-+ error = device_create_file(dev, &dev_attr_buspower_2);
-+ #else
-+ error = ifx_proc_addproc("buspower", procfs_buspower_show, procfs_buspower_store);
-+ error = device_create_file(dev, &dev_attr_buspower);
-+ #endif
-+
-+ #ifdef __IS_DUAL__
-+ error = ifx_proc_addproc("bussuspend_1", procfs_bussuspend_show_1, NULL);
-+ error = ifx_proc_addproc("bussuspend_2", procfs_bussuspend_show_2, NULL);
-+ error = device_create_file(dev, &dev_attr_bussuspend_1);
-+ error = device_create_file(dev, &dev_attr_bussuspend_2);
-+ #else
-+ error = ifx_proc_addproc("bussuspend", procfs_bussuspend_show, NULL);
-+ error = device_create_file(dev, &dev_attr_bussuspend);
-+ #endif
-+
-+ #ifdef __IS_DUAL__
-+ error = ifx_proc_addproc("busconnected_1", procfs_busconnected_show_1, NULL);
-+ error = ifx_proc_addproc("busconnected_2", procfs_busconnected_show_2, NULL);
-+ error = device_create_file(dev, &dev_attr_busconnected_1);
-+ error = device_create_file(dev, &dev_attr_busconnected_2);
-+ #else
-+ error = ifx_proc_addproc("busconnected", procfs_busconnected_show, NULL);
-+ error = device_create_file(dev, &dev_attr_busconnected);
-+ #endif
-+
-+ #ifdef __IS_DUAL__
-+ error = ifx_proc_addproc("connectspeed_1", procfs_connectspeed_show_1, NULL);
-+ error = ifx_proc_addproc("connectspeed_2", procfs_connectspeed_show_2, NULL);
-+ error = device_create_file(dev, &dev_attr_connectspeed_1);
-+ error = device_create_file(dev, &dev_attr_connectspeed_2);
-+ #else
-+ error = ifx_proc_addproc("connectspeed", procfs_connectspeed_show, NULL);
-+ error = device_create_file(dev, &dev_attr_connectspeed);
-+ #endif
-+ #endif
-+
-+ #ifdef __IS_DEVICE__
-+ error = ifx_proc_addproc("devspeed", procfs_devspeed_show, NULL);
-+ error = device_create_file(dev, &dev_attr_devspeed);
-+ error = ifx_proc_addproc("enumspeed", procfs_enumspeed_show, NULL);
-+ error = device_create_file(dev, &dev_attr_enumspeed);
-+ #endif
-+
-+ //////////////////////////////////////////////////////
-+ #ifdef __ENABLE_DUMP__
-+ #ifdef __IS_DUAL__
-+ error = ifx_proc_addproc("dump_reg_1", procfs_dump_reg_show_1, NULL);
-+ error = ifx_proc_addproc("dump_reg_2", procfs_dump_reg_show_2, NULL);
-+ error = device_create_file(dev, &dev_attr_dump_reg_1);
-+ error = device_create_file(dev, &dev_attr_dump_reg_2);
-+ #else
-+ error = ifx_proc_addproc("dump_reg", procfs_dump_reg_show, NULL);
-+ error = device_create_file(dev, &dev_attr_dump_reg);
-+ #endif
-+
-+ #ifdef __IS_DUAL__
-+ error = ifx_proc_addproc("dump_spram_1", procfs_dump_spram_show_1, NULL);
-+ error = ifx_proc_addproc("dump_spram_2", procfs_dump_spram_show_2, NULL);
-+ error = device_create_file(dev, &dev_attr_dump_spram_1);
-+ error = device_create_file(dev, &dev_attr_dump_spram_2);
-+ #else
-+ error = ifx_proc_addproc("dump_spram", procfs_dump_spram_show, NULL);
-+ error = device_create_file(dev, &dev_attr_dump_spram);
-+ #endif
-+
-+ #ifdef __IS_HOST__
-+ #ifdef __IS_DUAL__
-+ error = ifx_proc_addproc("dump_host_state_1", procfs_dump_host_state_show_1, NULL);
-+ error = ifx_proc_addproc("dump_host_state_2", procfs_dump_host_state_show_2, NULL);
-+ error = device_create_file(dev, &dev_attr_dump_host_state_1);
-+ error = device_create_file(dev, &dev_attr_dump_host_state_2);
-+ #else
-+ error = ifx_proc_addproc("dump_host_state", procfs_dump_host_state_show, NULL);
-+ error = device_create_file(dev, &dev_attr_dump_host_state);
-+ #endif
-+ #endif
-+ #endif //__ENABLE_DUMP__
-+ //////////////////////////////////////////////////////
-+}
-+
-+
-+/*!
-+ \brief This function remove the sysfs and procfs entries
-+ \param[in] _dev Pointer of device structure, if applied
-+ */
-+void ifxusb_attr_remove (void *_dev)
-+{
-+ struct device *dev = (struct device *) _dev;
-+
-+ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-+ ifx_proc_delproc("dbglevel");
-+ device_remove_file(dev, &dev_attr_dbglevel);
-+
-+ #ifdef __IS_DUAL__
-+ ifx_proc_delproc("dump_params_1");
-+ ifx_proc_delproc("dump_params_2");
-+ device_remove_file(dev, &dev_attr_dump_params_1);
-+ device_remove_file(dev, &dev_attr_dump_params_2);
-+ #else
-+ ifx_proc_delproc("dump_params");
-+ device_remove_file(dev, &dev_attr_dump_params);
-+ #endif
-+
-+ #ifdef __IS_DUAL__
-+ ifx_proc_delproc("mode_1");
-+ ifx_proc_delproc("mode_2");
-+ device_remove_file(dev, &dev_attr_mode_1);
-+ device_remove_file(dev, &dev_attr_mode_2);
-+ #else
-+ ifx_proc_delproc("mode");
-+ device_remove_file(dev, &dev_attr_mode);
-+ #endif
-+
-+ #ifdef __IS_HOST__
-+ #ifdef __IS_DUAL__
-+ ifx_proc_delproc("buspower_1");
-+ ifx_proc_delproc("buspower_2");
-+ device_remove_file(dev, &dev_attr_buspower_1);
-+ device_remove_file(dev, &dev_attr_buspower_2);
-+ #else
-+ ifx_proc_delproc("buspower");
-+ device_remove_file(dev, &dev_attr_buspower);
-+ #endif
-+
-+ #ifdef __IS_DUAL__
-+ ifx_proc_delproc("bussuspend_1");
-+ ifx_proc_delproc("bussuspend_2");
-+ device_remove_file(dev, &dev_attr_bussuspend_1);
-+ device_remove_file(dev, &dev_attr_bussuspend_2);
-+ #else
-+ ifx_proc_delproc("bussuspend");
-+ device_remove_file(dev, &dev_attr_bussuspend);
-+ #endif
-+
-+ #ifdef __IS_DUAL__
-+ ifx_proc_delproc("busconnected_1");
-+ ifx_proc_delproc("busconnected_2");
-+ device_remove_file(dev, &dev_attr_busconnected_1);
-+ device_remove_file(dev, &dev_attr_busconnected_2);
-+ #else
-+ ifx_proc_delproc("busconnected");
-+ device_remove_file(dev, &dev_attr_busconnected);
-+ #endif
-+
-+ #ifdef __IS_DUAL__
-+ ifx_proc_delproc("connectspeed_1");
-+ ifx_proc_delproc("connectspeed_2");
-+ device_remove_file(dev, &dev_attr_connectspeed_1);
-+ device_remove_file(dev, &dev_attr_connectspeed_2);
-+ #else
-+ ifx_proc_delproc("connectspeed");
-+ device_remove_file(dev, &dev_attr_connectspeed);
-+ #endif
-+ #endif
-+
-+ #ifdef __IS_DEVICE__
-+ ifx_proc_delproc("devspeed");
-+ device_remove_file(dev, &dev_attr_devspeed);
-+ ifx_proc_delproc("enumspeed");
-+ device_remove_file(dev, &dev_attr_enumspeed);
-+ #endif
-+
-+ #ifdef __ENABLE_DUMP__
-+ #ifdef __IS_DUAL__
-+ ifx_proc_delproc("dump_reg_1");
-+ ifx_proc_delproc("dump_reg_2");
-+ device_remove_file(dev, &dev_attr_dump_reg_1);
-+ device_remove_file(dev, &dev_attr_dump_reg_2);
-+ #else
-+ ifx_proc_delproc("dump_reg");
-+ device_remove_file(dev, &dev_attr_dump_reg);
-+ #endif
-+
-+ #ifdef __IS_DUAL__
-+ ifx_proc_delproc("dump_spram_1");
-+ ifx_proc_delproc("dump_spram_2");
-+ device_remove_file(dev, &dev_attr_dump_spram_1);
-+ device_remove_file(dev, &dev_attr_dump_spram_2);
-+ #else
-+ ifx_proc_delproc("dump_spram");
-+ device_remove_file(dev, &dev_attr_dump_spram);
-+ #endif
-+
-+ #ifdef __IS_HOST__
-+ #ifdef __IS_DUAL__
-+ ifx_proc_delproc("dump_host_state_1");
-+ ifx_proc_delproc("dump_host_state_2");
-+ device_remove_file(dev, &dev_attr_dump_host_state_1);
-+ device_remove_file(dev, &dev_attr_dump_host_state_2);
-+ #else
-+ ifx_proc_delproc("dump_host_state");
-+ device_remove_file(dev, &dev_attr_dump_host_state);
-+ #endif
-+ #endif
-+ #endif //__ENABLE_DUMP__
-+ /* AVM/WK fix: del IFXUSB root dir*/
-+ ifx_proc_delproc(NULL);
-+}
-+
-+static struct proc_dir_entry * proc_ifx_root = NULL;
-+
-+/* initialize the proc file system and make a dir named /proc/[name] */
-+static void ifx_proc_init(void)
-+{
-+ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-+ proc_ifx_root = proc_mkdir(ifxusb_driver_name, (void *)0);
-+ if (!proc_ifx_root){
-+ IFX_PRINT("%s proc initialization failed! \n", ifxusb_driver_name);
-+ return;
-+ }
-+}
-+
-+/* proc file system add function for debugging. */
-+static int ifx_proc_addproc(char *funcname, read_proc_t *hookfuncr, write_proc_t *hookfuncw)
-+{
-+ struct proc_dir_entry *pe;
-+ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-+ if (!proc_ifx_root)
-+ ifx_proc_init();
-+
-+ if (hookfuncw == NULL)
-+ {
-+ pe = create_proc_read_entry(funcname, S_IRUGO, proc_ifx_root, hookfuncr, NULL);
-+ if (!pe)
-+ {
-+ IFX_PRINT("ERROR in creating read proc entry (%s)! \n", funcname);
-+ return -1;
-+ }
-+ }
-+ else
-+ {
-+ pe = create_proc_entry(funcname, S_IRUGO | S_IWUGO, proc_ifx_root);
-+ if (pe)
-+ {
-+ pe->read_proc = hookfuncr;
-+ pe->write_proc = hookfuncw;
-+ }
-+ else
-+ {
-+ IFX_PRINT("ERROR in creating proc entry (%s)! \n", funcname);
-+ return -1;
-+ }
-+ }
-+ return 0;
-+}
-+
-+
-+/* proc file system del function for removing module. */
-+static void ifx_proc_delproc(char *funcname)
-+{
-+/* AVM/WK Fix*/
-+ if (funcname != NULL) {
-+ remove_proc_entry(funcname, proc_ifx_root);
-+ } else {
-+ remove_proc_entry(ifxusb_driver_name, NULL);
-+ proc_ifx_root = NULL;
-+ }
-+}
-+
-+static void ifxusb_dump_params(ifxusb_core_if_t *_core_if)
-+{
-+ ifxusb_params_t *params=&_core_if->params;
-+
-+ #ifdef __IS_HOST__
-+ IFX_PRINT("IFXUSB Dump Parameters ( Host Mode) \n");
-+ #endif //__IS_HOST__
-+ #ifdef __IS_DEVICE__
-+ IFX_PRINT("IFXUSB Dump Parameters ( Device Mode) \n");
-+ #endif //__IS_DEVICE__
-+
-+ #ifdef __DESC_DMA__
-+ IFX_PRINT("DMA: Hermes DMA\n");
-+ #else
-+ IFX_PRINT("DMA: Non-Desc DMA\n");
-+ #endif
-+ IFX_PRINT(" Burst size: %d\n",params->dma_burst_size);
-+
-+ if (params->speed==1)
-+ IFX_PRINT("Full Speed only\n");
-+ else if(params->speed==0)
-+ IFX_PRINT("Full/Hign Speed\n");
-+ else
-+ IFX_PRINT("Unkonwn setting (%d) for Speed\n",params->speed);
-+
-+ IFX_PRINT("Total Data FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",
-+ params->data_fifo_size,params->data_fifo_size,
-+ params->data_fifo_size*4, params->data_fifo_size*4
-+ );
-+
-+ #ifdef __IS_DEVICE__
-+ IFX_PRINT("Rx FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",
-+ params->rx_fifo_size,params->rx_fifo_size,
-+ params->rx_fifo_size*4, params->rx_fifo_size*4
-+ );
-+ {
-+ int i;
-+ for(i=0;i<MAX_EPS_CHANNELS;i++)
-+ {
-+ IFX_PRINT("Tx FIFO #%d size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",i,
-+ params->tx_fifo_size[i],params->tx_fifo_size[i],
-+ params->tx_fifo_size[i]*4, params->tx_fifo_size[i]*4
-+ );
-+ }
-+ }
-+ #ifdef __DED_FIFO__
-+ IFX_PRINT("Treshold : %s Rx:%d Tx:%d \n",
-+ (params->thr_ctl)?"On":"Off",params->tx_thr_length,params->rx_thr_length);
-+ #endif
-+ #else //__IS_HOST__
-+ IFX_PRINT("Host Channels: %d\n",params->host_channels);
-+
-+ IFX_PRINT("Rx FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",
-+ params->data_fifo_size,params->data_fifo_size,
-+ params->data_fifo_size*4, params->data_fifo_size*4
-+ );
-+
-+ IFX_PRINT("NP Tx FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",
-+ params->nperio_tx_fifo_size,params->nperio_tx_fifo_size,
-+ params->nperio_tx_fifo_size*4, params->nperio_tx_fifo_size*4
-+ );
-+
-+ IFX_PRINT(" P Tx FIFO size: %d(0x%06X) DWord, %d(0x%06X) Bytes\n",
-+ params->perio_tx_fifo_size,params->perio_tx_fifo_size,
-+ params->perio_tx_fifo_size*4, params->perio_tx_fifo_size*4
-+ );
-+ #endif //__IS_HOST__
-+
-+ IFX_PRINT("Max Transfer size: %d(0x%06X) Bytes\n",
-+ params->max_transfer_size,params->max_transfer_size
-+ );
-+ IFX_PRINT("Max Packet Count: %d(0x%06X)\n",
-+ params->max_packet_count,params->max_packet_count
-+ );
-+
-+ IFX_PRINT("PHY UTMI Width: %d\n",params->phy_utmi_width);
-+
-+ IFX_PRINT("Turn Around Time: HS:%d FS:%d\n",params->turn_around_time_hs,params->turn_around_time_fs);
-+ IFX_PRINT("Timeout Calibration: HS:%d FS:%d\n",params->timeout_cal_hs,params->timeout_cal_fs);
-+
-+
-+ IFX_PRINT("==================================================\n");
-+ IFX_PRINT("End of Parameters Dump\n");
-+ IFX_PRINT("==================================================\n");
-+}
-+
-+
---- /dev/null
-+++ b/drivers/usb/ifxhcd/ifxusb_driver.c
-@@ -0,0 +1,970 @@
-+/*****************************************************************************
-+ ** FILE NAME : ifxusb_driver.c
-+ ** PROJECT : IFX USB sub-system V3
-+ ** MODULES : IFX USB sub-system Host and Device driver
-+ ** SRC VERSION : 1.0
-+ ** DATE : 1/Jan/2009
-+ ** AUTHOR : Chen, Howard
-+ ** DESCRIPTION : The provides the initialization and cleanup entry
-+ ** points for the IFX USB driver. This module can be
-+ ** dynamically loaded with insmod command or built-in
-+ ** with kernel. When loaded or executed the ifxusb_driver_init
-+ ** function is called. When the module is removed (using rmmod),
-+ ** the ifxusb_driver_cleanup function is called.
-+ *****************************************************************************/
-+
-+/*!
-+ \file ifxusb_driver.c
-+ \brief This file contains the loading/unloading interface to the Linux driver.
-+*/
-+
-+#include <linux/version.h>
-+#include "ifxusb_version.h"
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/errno.h>
-+#include <linux/types.h>
-+#include <linux/stat.h> /* permission constants */
-+#include <linux/gpio.h>
-+#include <lantiq_soc.h>
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+ #include <linux/irq.h>
-+#endif
-+
-+#include <asm/io.h>
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+ #include <asm/irq.h>
-+#endif
-+
-+#include "ifxusb_plat.h"
-+
-+#include "ifxusb_cif.h"
-+
-+#ifdef __IS_HOST__
-+ #include "ifxhcd.h"
-+
-+ #define USB_DRIVER_DESC "IFX USB HCD driver"
-+ const char ifxusb_driver_name[] = "ifxusb_hcd";
-+
-+ #ifdef __IS_DUAL__
-+ ifxhcd_hcd_t ifxusb_hcd_1;
-+ ifxhcd_hcd_t ifxusb_hcd_2;
-+ const char ifxusb_hcd_name_1[] = "ifxusb_hcd_1";
-+ const char ifxusb_hcd_name_2[] = "ifxusb_hcd_2";
-+ #else
-+ ifxhcd_hcd_t ifxusb_hcd;
-+ const char ifxusb_hcd_name[] = "ifxusb_hcd";
-+ #endif
-+
-+ #if defined(__DO_OC_INT__)
-+ static unsigned int oc_int_installed=0;
-+ static ifxhcd_hcd_t *oc_int_id=NULL;
-+ #endif
-+#endif
-+
-+#ifdef __IS_DEVICE__
-+ #include "ifxpcd.h"
-+
-+ #define USB_DRIVER_DESC "IFX USB PCD driver"
-+ const char ifxusb_driver_name[] = "ifxusb_pcd";
-+
-+ ifxpcd_pcd_t ifxusb_pcd;
-+ const char ifxusb_pcd_name[] = "ifxusb_pcd";
-+#endif
-+
-+/* Global Debug Level Mask. */
-+#ifdef __IS_HOST__
-+ uint32_t h_dbg_lvl = 0x00;
-+#endif
-+
-+#ifdef __IS_DEVICE__
-+ uint32_t d_dbg_lvl = 0x00;
-+#endif
-+
-+ifxusb_params_t ifxusb_module_params;
-+
-+static void parse_parms(void);
-+
-+
-+#include <lantiq_irq.h>
-+#define IFX_USB0_IR (INT_NUM_IM1_IRL0 + 22)
-+#define IFX_USB1_IR (INT_NUM_IM2_IRL0 + 19)
-+
-+/*!
-+ \brief This function is called when a driver is unregistered. This happens when
-+ the rmmod command is executed. The device may or may not be electrically
-+ present. If it is present, the driver stops device processing. Any resources
-+ used on behalf of this device are freed.
-+*/
-+static int ifxusb_driver_remove(struct platform_device *_dev)
-+{
-+ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-+ #ifdef __IS_HOST__
-+ #if defined(__DO_OC_INT__)
-+ #if defined(__DO_OC_INT_ENABLE__)
-+ ifxusb_oc_int_off();
-+ #endif
-+
-+ if(oc_int_installed && oc_int_id)
-+ free_irq((unsigned int)IFXUSB_OC_IRQ, oc_int_id );
-+ oc_int_installed=0;
-+ oc_int_id=NULL;
-+ #endif
-+
-+ #if defined(__IS_DUAL__)
-+ ifxhcd_remove(&ifxusb_hcd_1);
-+ ifxusb_core_if_remove(&ifxusb_hcd_1.core_if );
-+ ifxhcd_remove(&ifxusb_hcd_2);
-+ ifxusb_core_if_remove(&ifxusb_hcd_2.core_if );
-+ #else
-+ ifxhcd_remove(&ifxusb_hcd);
-+ ifxusb_core_if_remove(&ifxusb_hcd.core_if );
-+ #endif
-+ #endif
-+
-+ #ifdef __IS_DEVICE__
-+ ifxpcd_remove();
-+ ifxusb_core_if_remove(&ifxusb_pcd.core_if );
-+ #endif
-+
-+ /* Remove the device attributes */
-+
-+ ifxusb_attr_remove(&_dev->dev);
-+
-+ return 0;
-+}
-+
-+
-+/* Function to setup the structures to control one usb core running as host*/
-+#ifdef __IS_HOST__
-+/*!
-+ \brief inlined by ifxusb_driver_probe(), handling host mode probing. Run at each host core.
-+*/
-+ static inline int ifxusb_driver_probe_h(ifxhcd_hcd_t *_hcd,
-+ int _irq,
-+ uint32_t _iobase,
-+ uint32_t _fifomem,
-+ uint32_t _fifodbg
-+ )
-+ {
-+ int retval = 0;
-+
-+ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-+
-+#ifdef __DEV_NEW__
-+ ifxusb_power_off (&_hcd->core_if);
-+ ifxusb_phy_power_off (&_hcd->core_if); // Test
-+ mdelay(500);
-+#endif //__DEV_NEW__
-+ ifxusb_power_on (&_hcd->core_if);
-+ mdelay(50);
-+ ifxusb_phy_power_on (&_hcd->core_if); // Test
-+ mdelay(50);
-+ ifxusb_hard_reset(&_hcd->core_if);
-+ retval =ifxusb_core_if_init(&_hcd->core_if,
-+ _irq,
-+ _iobase,
-+ _fifomem,
-+ _fifodbg);
-+ if(retval)
-+ return retval;
-+
-+ ifxusb_host_core_init(&_hcd->core_if,&ifxusb_module_params);
-+
-+ ifxusb_disable_global_interrupts( &_hcd->core_if);
-+
-+ /* The driver is now initialized and need to be registered into Linux USB sub-system */
-+
-+ retval = ifxhcd_init(_hcd); // hook the hcd into usb ss
-+
-+ if (retval != 0)
-+ {
-+ IFX_ERROR("_hcd_init failed\n");
-+ return retval;
-+ }
-+
-+ //ifxusb_enable_global_interrupts( _hcd->core_if ); // this should be done at hcd_start , including hcd_interrupt
-+ return 0;
-+ }
-+#endif //__IS_HOST__
-+
-+#ifdef __IS_DEVICE__
-+/*!
-+ \brief inlined by ifxusb_driver_probe(), handling device mode probing.
-+*/
-+ static inline int ifxusb_driver_probe_d(ifxpcd_pcd_t *_pcd,
-+ int _irq,
-+ uint32_t _iobase,
-+ uint32_t _fifomem,
-+ uint32_t _fifodbg
-+ )
-+ {
-+ int retval = 0;
-+
-+ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-+#ifdef __DEV_NEW__
-+ ifxusb_power_off (&_pcd->core_if);
-+ ifxusb_phy_power_off (&_pcd->core_if); // Test
-+ mdelay(500);
-+#endif // __DEV_NEW__
-+ ifxusb_power_on (&_pcd->core_if);
-+ mdelay(50);
-+ ifxusb_phy_power_on (&_pcd->core_if); // Test
-+ mdelay(50);
-+ ifxusb_hard_reset(&_pcd->core_if);
-+ retval =ifxusb_core_if_init(&_pcd->core_if,
-+ _irq,
-+ _iobase,
-+ _fifomem,
-+ _fifodbg);
-+ if(retval)
-+ return retval;
-+
-+ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-+ ifxusb_dev_core_init(&_pcd->core_if,&ifxusb_module_params);
-+
-+ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-+ ifxusb_disable_global_interrupts( &_pcd->core_if);
-+
-+ /* The driver is now initialized and need to be registered into
-+ Linux USB Gadget sub-system
-+ */
-+ retval = ifxpcd_init();
-+ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-+
-+ if (retval != 0)
-+ {
-+ IFX_ERROR("_pcd_init failed\n");
-+ return retval;
-+ }
-+ //ifxusb_enable_global_interrupts( _pcd->core_if ); // this should be done at gadget bind or start
-+ return 0;
-+ }
-+#endif //__IS_DEVICE__
-+
-+
-+
-+/*!
-+ \brief This function is called by module management in 2.6 kernel or by ifxusb_driver_init with 2.4 kernel
-+ It is to probe and setup IFXUSB core(s).
-+*/
-+static int ifxusb_driver_probe(struct platform_device *_dev)
-+{
-+ int retval = 0;
-+ int *pins = _dev->dev.platform_data;
-+ if (ltq_is_vr9()) {
-+ gpio_request(6, "id1");
-+ gpio_request(9, "id2");
-+ gpio_direction_input(6);
-+ gpio_direction_input(9);
-+ }
-+ if (pins) {
-+ if (pins[0]) {
-+ gpio_request(pins[0], "vbus1");
-+ gpio_direction_output(pins[0], 1);
-+ }
-+ if (pins[1] && ltq_is_vr9()) {
-+ gpio_request(pins[1], "vbus2");
-+ gpio_direction_output(pins[1], 1);
-+ }
-+ }
-+ // Parsing and store the parameters
-+ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-+ parse_parms();
-+
-+ #ifdef __IS_HOST__
-+ #if defined(__IS_DUAL__)
-+ memset(&ifxusb_hcd_1, 0, sizeof(ifxhcd_hcd_t));
-+ memset(&ifxusb_hcd_2, 0, sizeof(ifxhcd_hcd_t));
-+
-+ ifxusb_hcd_1.core_if.core_no=0;
-+ ifxusb_hcd_2.core_if.core_no=1;
-+ ifxusb_hcd_1.core_if.core_name=(char *)ifxusb_hcd_name_1;
-+ ifxusb_hcd_2.core_if.core_name=(char *)ifxusb_hcd_name_2;
-+
-+ ifxusb_hcd_1.dev=&_dev->dev;
-+ ifxusb_hcd_2.dev=&_dev->dev;
-+
-+ retval = ifxusb_driver_probe_h(&ifxusb_hcd_1,
-+ IFX_USB0_IR,
-+ IFXUSB1_IOMEM_BASE,
-+ IFXUSB1_FIFOMEM_BASE,
-+ IFXUSB1_FIFODBG_BASE
-+ );
-+ if(retval)
-+ goto ifxusb_driver_probe_fail;
-+
-+ retval = ifxusb_driver_probe_h(&ifxusb_hcd_2,
-+ IFX_USB1_IR,
-+ IFXUSB2_IOMEM_BASE,
-+ IFXUSB2_FIFOMEM_BASE,
-+ IFXUSB2_FIFODBG_BASE
-+ );
-+ if(retval)
-+ goto ifxusb_driver_probe_fail;
-+
-+ #elif defined(__IS_FIRST__)
-+ memset(&ifxusb_hcd, 0, sizeof(ifxhcd_hcd_t));
-+
-+ ifxusb_hcd.core_if.core_no=0;
-+ ifxusb_hcd.core_if.core_name=(char *)ifxusb_hcd_name;
-+
-+ ifxusb_hcd.dev=&_dev->dev;
-+
-+ retval = ifxusb_driver_probe_h(&ifxusb_hcd,
-+ IFX_USB0_IR,
-+ IFXUSB1_IOMEM_BASE,
-+ IFXUSB1_FIFOMEM_BASE,
-+ IFXUSB1_FIFODBG_BASE
-+ );
-+ if(retval)
-+ goto ifxusb_driver_probe_fail;
-+
-+ #elif defined(__IS_SECOND__)
-+ memset(&ifxusb_hcd, 0, sizeof(ifxhcd_hcd_t));
-+
-+ ifxusb_hcd.core_if.core_no=1;
-+ ifxusb_hcd.core_if.core_name=(char *)ifxusb_hcd_name;
-+
-+ ifxusb_hcd.dev=&_dev->dev;
-+
-+ retval = ifxusb_driver_probe_h(&ifxusb_hcd,
-+ IFX_USB1_IR,
-+ IFXUSB2_IOMEM_BASE,
-+ IFXUSB2_FIFOMEM_BASE,
-+ IFXUSB2_FIFODBG_BASE
-+ );
-+ if(retval)
-+ goto ifxusb_driver_probe_fail;
-+
-+ #else
-+ memset(&ifxusb_hcd, 0, sizeof(ifxhcd_hcd_t));
-+
-+ ifxusb_hcd.core_if.core_no=0;
-+ ifxusb_hcd.core_if.core_name=(char *)ifxusb_hcd_name;
-+
-+ ifxusb_hcd.dev=&_dev->dev;
-+
-+ retval = ifxusb_driver_probe_h(&ifxusb_hcd,
-+ IFXUSB_IRQ,
-+ IFXUSB_IOMEM_BASE,
-+ IFXUSB_FIFOMEM_BASE,
-+ IFXUSB_FIFODBG_BASE
-+ );
-+ if(retval)
-+ goto ifxusb_driver_probe_fail;
-+ #endif
-+
-+ #if defined(__DO_OC_INT__)
-+ IFXUSB_DEBUGPL( DBG_CIL, "registering (overcurrent) handler for irq%d\n", IFXUSB_OC_IRQ);
-+ #if defined(__IS_DUAL__)
-+ request_irq((unsigned int)IFXUSB_OC_IRQ, &ifx_hcd_oc_irq,
-+// SA_INTERRUPT|SA_SHIRQ, "ifxusb_oc", (void *)&ifxusb_hcd_1);
-+ IRQF_DISABLED | IRQF_SHARED, "ifxusb_oc", (void *)&ifxusb_hcd_1);
-+ oc_int_id=&ifxusb_hcd_1;
-+ #else
-+ request_irq((unsigned int)IFXUSB_OC_IRQ, &ifx_hcd_oc_irq,
-+// SA_INTERRUPT|SA_SHIRQ, "ifxusb_oc", (void *)&ifxusb_hcd);
-+ IRQF_DISABLED | IRQF_SHARED, "ifxusb_oc", (void *)&ifxusb_hcd);
-+ oc_int_id=&ifxusb_hcd;
-+ #endif
-+ oc_int_installed=1;
-+
-+ #if defined(__DO_OC_INT_ENABLE__)
-+ ifxusb_oc_int_on();
-+ #endif
-+ #endif
-+
-+ #endif
-+
-+ #ifdef __IS_DEVICE__
-+ memset(&ifxusb_pcd, 0, sizeof(ifxpcd_pcd_t));
-+ ifxusb_pcd.core_if.core_name=(char *)&ifxusb_pcd_name[0];
-+
-+ ifxusb_pcd.dev=&_dev->dev;
-+
-+ #if defined(__IS_FIRST__)
-+ ifxusb_pcd.core_if.core_no=0;
-+ retval = ifxusb_driver_probe_d(&ifxusb_pcd,
-+ IFXUSB1_IRQ,
-+ IFXUSB1_IOMEM_BASE,
-+ IFXUSB1_FIFOMEM_BASE,
-+ IFXUSB1_FIFODBG_BASE
-+ );
-+ #elif defined(__IS_SECOND__)
-+ ifxusb_pcd.core_if.core_no=1;
-+ retval = ifxusb_driver_probe_d(&ifxusb_pcd,
-+ IFXUSB2_IRQ,
-+ IFXUSB2_IOMEM_BASE,
-+ IFXUSB2_FIFOMEM_BASE,
-+ IFXUSB2_FIFODBG_BASE
-+ );
-+ #else
-+ ifxusb_pcd.core_if.core_no=0;
-+ retval = ifxusb_driver_probe_d(&ifxusb_pcd,
-+ IFXUSB_IRQ,
-+ IFXUSB_IOMEM_BASE,
-+ IFXUSB_FIFOMEM_BASE,
-+ IFXUSB_FIFODBG_BASE
-+ );
-+ #endif
-+ if(retval)
-+ goto ifxusb_driver_probe_fail;
-+ #endif
-+
-+ ifxusb_attr_create(&_dev->dev);
-+
-+ return 0;
-+
-+ifxusb_driver_probe_fail:
-+ ifxusb_driver_remove(_dev);
-+ return retval;
-+}
-+
-+
-+
-+/*!
-+ \brief This function is called when the ifxusb_driver is installed with the insmod command.
-+*/
-+
-+
-+static struct platform_driver ifxusb_driver = {
-+ .driver = {
-+ .name = ifxusb_driver_name,
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = ifxusb_driver_probe,
-+ .remove = ifxusb_driver_remove,
-+};
-+
-+int __init ifxusb_driver_init(void)
-+{
-+ int retval = 0;
-+
-+ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-+ IFX_PRINT("%s: version %s\n", ifxusb_driver_name, IFXUSB_VERSION);
-+
-+ retval = platform_driver_register(&ifxusb_driver);
-+
-+ if (retval < 0) {
-+ IFX_ERROR("%s retval=%d\n", __func__, retval);
-+ return retval;
-+ }
-+ return retval;
-+}
-+
-+#if 0 // 2.4
-+ int __init ifxusb_driver_init(void)
-+ {
-+ int retval = 0;
-+ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-+ IFX_PRINT("%s: version %s\n", ifxusb_driver_name, IFXUSB_VERSION);
-+ retval = ifxusb_driver_probe();
-+
-+ if (retval < 0) {
-+ IFX_ERROR("%s retval=%d\n", __func__, retval);
-+ return retval;
-+ }
-+
-+ return retval;
-+ }
-+#endif
-+
-+module_init(ifxusb_driver_init);
-+
-+
-+/*!
-+ \brief This function is called when the driver is removed from the kernel
-+ with the rmmod command. The driver unregisters itself with its bus
-+ driver.
-+*/
-+
-+void __exit ifxusb_driver_cleanup(void)
-+{
-+ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-+
-+ platform_driver_unregister(&ifxusb_driver);
-+
-+ IFX_PRINT("%s module removed\n", ifxusb_driver_name);
-+}
-+#if 0
-+ void __exit ifxusb_driver_cleanup(void)
-+ {
-+ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-+ ifxusb_driver_remove();
-+ IFX_PRINT("%s module removed\n", ifxusb_driver_name);
-+ }
-+#endif
-+module_exit(ifxusb_driver_cleanup);
-+
-+
-+
-+MODULE_DESCRIPTION(USB_DRIVER_DESC);
-+MODULE_AUTHOR("Infineon");
-+MODULE_LICENSE("GPL");
-+
-+
-+
-+// Parameters set when loaded
-+//static long dbg_lvl =0xFFFFFFFF;
-+static long dbg_lvl =0;
-+static short dma_burst_size =-1;
-+static short speed =-1;
-+static long data_fifo_size =-1;
-+#ifdef __IS_DEVICE__
-+ static long rx_fifo_size =-1;
-+ #ifdef __DED_FIFO__
-+ static long tx_fifo_size_00 =-1;
-+ static long tx_fifo_size_01 =-1;
-+ static long tx_fifo_size_02 =-1;
-+ static long tx_fifo_size_03 =-1;
-+ static long tx_fifo_size_04 =-1;
-+ static long tx_fifo_size_05 =-1;
-+ static long tx_fifo_size_06 =-1;
-+ static long tx_fifo_size_07 =-1;
-+ static long tx_fifo_size_08 =-1;
-+ static long tx_fifo_size_09 =-1;
-+ static long tx_fifo_size_10 =-1;
-+ static long tx_fifo_size_11 =-1;
-+ static long tx_fifo_size_12 =-1;
-+ static long tx_fifo_size_13 =-1;
-+ static long tx_fifo_size_14 =-1;
-+ static long tx_fifo_size_15 =-1;
-+ static short thr_ctl=-1;
-+ static long tx_thr_length =-1;
-+ static long rx_thr_length =-1;
-+ #else
-+ static long nperio_tx_fifo_size =-1;
-+ static long perio_tx_fifo_size_01 =-1;
-+ static long perio_tx_fifo_size_02 =-1;
-+ static long perio_tx_fifo_size_03 =-1;
-+ static long perio_tx_fifo_size_04 =-1;
-+ static long perio_tx_fifo_size_05 =-1;
-+ static long perio_tx_fifo_size_06 =-1;
-+ static long perio_tx_fifo_size_07 =-1;
-+ static long perio_tx_fifo_size_08 =-1;
-+ static long perio_tx_fifo_size_09 =-1;
-+ static long perio_tx_fifo_size_10 =-1;
-+ static long perio_tx_fifo_size_11 =-1;
-+ static long perio_tx_fifo_size_12 =-1;
-+ static long perio_tx_fifo_size_13 =-1;
-+ static long perio_tx_fifo_size_14 =-1;
-+ static long perio_tx_fifo_size_15 =-1;
-+ #endif
-+ static short dev_endpoints =-1;
-+#endif
-+
-+#ifdef __IS_HOST__
-+ static long rx_fifo_size =-1;
-+ static long nperio_tx_fifo_size =-1;
-+ static long perio_tx_fifo_size =-1;
-+ static short host_channels =-1;
-+#endif
-+
-+static long max_transfer_size =-1;
-+static long max_packet_count =-1;
-+static long phy_utmi_width =-1;
-+static long turn_around_time_hs =-1;
-+static long turn_around_time_fs =-1;
-+static long timeout_cal_hs =-1;
-+static long timeout_cal_fs =-1;
-+
-+/*!
-+ \brief Parsing the parameters taken when module load
-+*/
-+static void parse_parms(void)
-+{
-+
-+ IFX_DEBUGPL(DBG_ENTRY, "%s() %d\n", __func__, __LINE__ );
-+ #ifdef __IS_HOST__
-+ h_dbg_lvl=dbg_lvl;
-+ #endif
-+ #ifdef __IS_DEVICE__
-+ d_dbg_lvl=dbg_lvl;
-+ #endif
-+
-+ switch(dma_burst_size)
-+ {
-+ case 0:
-+ case 1:
-+ case 4:
-+ case 8:
-+ case 16:
-+ ifxusb_module_params.dma_burst_size=dma_burst_size;
-+ break;
-+ default:
-+ ifxusb_module_params.dma_burst_size=default_param_dma_burst_size;
-+ }
-+
-+ if(speed==0 || speed==1)
-+ ifxusb_module_params.speed=speed;
-+ else
-+ ifxusb_module_params.speed=default_param_speed;
-+
-+ if(max_transfer_size>=2048 && max_transfer_size<=65535)
-+ ifxusb_module_params.max_transfer_size=max_transfer_size;
-+ else
-+ ifxusb_module_params.max_transfer_size=default_param_max_transfer_size;
-+
-+ if(max_packet_count>=15 && max_packet_count<=511)
-+ ifxusb_module_params.max_packet_count=max_packet_count;
-+ else
-+ ifxusb_module_params.max_packet_count=default_param_max_packet_count;
-+
-+ switch(phy_utmi_width)
-+ {
-+ case 8:
-+ case 16:
-+ ifxusb_module_params.phy_utmi_width=phy_utmi_width;
-+ break;
-+ default:
-+ ifxusb_module_params.phy_utmi_width=default_param_phy_utmi_width;
-+ }
-+
-+ if(turn_around_time_hs>=0 && turn_around_time_hs<=7)
-+ ifxusb_module_params.turn_around_time_hs=turn_around_time_hs;
-+ else
-+ ifxusb_module_params.turn_around_time_hs=default_param_turn_around_time_hs;
-+
-+ if(turn_around_time_fs>=0 && turn_around_time_fs<=7)
-+ ifxusb_module_params.turn_around_time_fs=turn_around_time_fs;
-+ else
-+ ifxusb_module_params.turn_around_time_fs=default_param_turn_around_time_fs;
-+
-+ if(timeout_cal_hs>=0 && timeout_cal_hs<=7)
-+ ifxusb_module_params.timeout_cal_hs=timeout_cal_hs;
-+ else
-+ ifxusb_module_params.timeout_cal_hs=default_param_timeout_cal_hs;
-+
-+ if(timeout_cal_fs>=0 && timeout_cal_fs<=7)
-+ ifxusb_module_params.timeout_cal_fs=timeout_cal_fs;
-+ else
-+ ifxusb_module_params.timeout_cal_fs=default_param_timeout_cal_fs;
-+
-+ if(data_fifo_size>=32 && data_fifo_size<=32768)
-+ ifxusb_module_params.data_fifo_size=data_fifo_size;
-+ else
-+ ifxusb_module_params.data_fifo_size=default_param_data_fifo_size;
-+
-+ #ifdef __IS_HOST__
-+ if(host_channels>=1 && host_channels<=16)
-+ ifxusb_module_params.host_channels=host_channels;
-+ else
-+ ifxusb_module_params.host_channels=default_param_host_channels;
-+
-+ if(rx_fifo_size>=16 && rx_fifo_size<=32768)
-+ ifxusb_module_params.rx_fifo_size=rx_fifo_size;
-+ else
-+ ifxusb_module_params.rx_fifo_size=default_param_rx_fifo_size;
-+
-+ if(nperio_tx_fifo_size>=16 && nperio_tx_fifo_size<=32768)
-+ ifxusb_module_params.nperio_tx_fifo_size=nperio_tx_fifo_size;
-+ else
-+ ifxusb_module_params.nperio_tx_fifo_size=default_param_nperio_tx_fifo_size;
-+
-+ if(perio_tx_fifo_size>=16 && perio_tx_fifo_size<=32768)
-+ ifxusb_module_params.perio_tx_fifo_size=perio_tx_fifo_size;
-+ else
-+ ifxusb_module_params.perio_tx_fifo_size=default_param_perio_tx_fifo_size;
-+ #endif //__IS_HOST__
-+
-+ #ifdef __IS_DEVICE__
-+ if(rx_fifo_size>=16 && rx_fifo_size<=32768)
-+ ifxusb_module_params.rx_fifo_size=rx_fifo_size;
-+ else
-+ ifxusb_module_params.rx_fifo_size=default_param_rx_fifo_size;
-+ #ifdef __DED_FIFO__
-+ if(tx_fifo_size_00>=16 && tx_fifo_size_00<=32768)
-+ ifxusb_module_params.tx_fifo_size[ 0]=tx_fifo_size_00;
-+ else
-+ ifxusb_module_params.tx_fifo_size[ 0]=default_param_tx_fifo_size_00;
-+ if(tx_fifo_size_01>=0 && tx_fifo_size_01<=32768)
-+ ifxusb_module_params.tx_fifo_size[ 1]=tx_fifo_size_01;
-+ else
-+ ifxusb_module_params.tx_fifo_size[ 1]=default_param_tx_fifo_size_01;
-+ if(tx_fifo_size_02>=0 && tx_fifo_size_02<=32768)
-+ ifxusb_module_params.tx_fifo_size[ 2]=tx_fifo_size_02;
-+ else
-+ ifxusb_module_params.tx_fifo_size[ 2]=default_param_tx_fifo_size_02;
-+ if(tx_fifo_size_03>=0 && tx_fifo_size_03<=32768)
-+ ifxusb_module_params.tx_fifo_size[ 3]=tx_fifo_size_03;
-+ else
-+ ifxusb_module_params.tx_fifo_size[ 3]=default_param_tx_fifo_size_03;
-+ if(tx_fifo_size_04>=0 && tx_fifo_size_04<=32768)
-+ ifxusb_module_params.tx_fifo_size[ 4]=tx_fifo_size_04;
-+ else
-+ ifxusb_module_params.tx_fifo_size[ 4]=default_param_tx_fifo_size_04;
-+ if(tx_fifo_size_05>=0 && tx_fifo_size_05<=32768)
-+ ifxusb_module_params.tx_fifo_size[ 5]=tx_fifo_size_05;
-+ else
-+ ifxusb_module_params.tx_fifo_size[ 5]=default_param_tx_fifo_size_05;
-+ if(tx_fifo_size_06>=0 && tx_fifo_size_06<=32768)
-+ ifxusb_module_params.tx_fifo_size[ 6]=tx_fifo_size_06;
-+ else
-+ ifxusb_module_params.tx_fifo_size[ 6]=default_param_tx_fifo_size_06;
-+ if(tx_fifo_size_07>=0 && tx_fifo_size_07<=32768)
-+ ifxusb_module_params.tx_fifo_size[ 7]=tx_fifo_size_07;
-+ else
-+ ifxusb_module_params.tx_fifo_size[ 7]=default_param_tx_fifo_size_07;
-+ if(tx_fifo_size_08>=0 && tx_fifo_size_08<=32768)
-+ ifxusb_module_params.tx_fifo_size[ 8]=tx_fifo_size_08;
-+ else
-+ ifxusb_module_params.tx_fifo_size[ 8]=default_param_tx_fifo_size_08;
-+ if(tx_fifo_size_09>=0 && tx_fifo_size_09<=32768)
-+ ifxusb_module_params.tx_fifo_size[ 9]=tx_fifo_size_09;
-+ else
-+ ifxusb_module_params.tx_fifo_size[ 9]=default_param_tx_fifo_size_09;
-+ if(tx_fifo_size_10>=0 && tx_fifo_size_10<=32768)
-+ ifxusb_module_params.tx_fifo_size[10]=tx_fifo_size_10;
-+ else
-+ ifxusb_module_params.tx_fifo_size[10]=default_param_tx_fifo_size_10;
-+ if(tx_fifo_size_11>=0 && tx_fifo_size_11<=32768)
-+ ifxusb_module_params.tx_fifo_size[11]=tx_fifo_size_11;
-+ else
-+ ifxusb_module_params.tx_fifo_size[11]=default_param_tx_fifo_size_11;
-+ if(tx_fifo_size_12>=0 && tx_fifo_size_12<=32768)
-+ ifxusb_module_params.tx_fifo_size[12]=tx_fifo_size_12;
-+ else
-+ ifxusb_module_params.tx_fifo_size[12]=default_param_tx_fifo_size_12;
-+ if(tx_fifo_size_13>=0 && tx_fifo_size_13<=32768)
-+ ifxusb_module_params.tx_fifo_size[13]=tx_fifo_size_13;
-+ else
-+ ifxusb_module_params.tx_fifo_size[13]=default_param_tx_fifo_size_13;
-+ if(tx_fifo_size_14>=0 && tx_fifo_size_14<=32768)
-+ ifxusb_module_params.tx_fifo_size[14]=tx_fifo_size_14;
-+ else
-+ ifxusb_module_params.tx_fifo_size[14]=default_param_tx_fifo_size_14;
-+ if(tx_fifo_size_15>=0 && tx_fifo_size_15<=32768)
-+ ifxusb_module_params.tx_fifo_size[15]=tx_fifo_size_15;
-+ else
-+ ifxusb_module_params.tx_fifo_size[15]=default_param_tx_fifo_size_15;
-+ if(thr_ctl==0 || thr_ctl==1)
-+ ifxusb_module_params.thr_ctl=thr_ctl;
-+ else
-+ ifxusb_module_params.thr_ctl=default_param_thr_ctl;
-+ if(tx_thr_length>=16 && tx_thr_length<=511)
-+ ifxusb_module_params.tx_thr_length=tx_thr_length;
-+ else
-+ ifxusb_module_params.tx_thr_length=default_param_tx_thr_length;
-+ if(rx_thr_length>=16 && rx_thr_length<=511)
-+ ifxusb_module_params.rx_thr_length=rx_thr_length;
-+ else
-+ ifxusb_module_params.rx_thr_length=default_param_rx_thr_length;
-+ #else //__DED_FIFO__
-+ if(nperio_tx_fifo_size>=16 && nperio_tx_fifo_size<=32768)
-+ ifxusb_module_params.tx_fifo_size[ 0]=nperio_tx_fifo_size;
-+ else
-+ ifxusb_module_params.tx_fifo_size[ 0]=default_param_nperio_tx_fifo_size;
-+ if(perio_tx_fifo_size_01>=0 && perio_tx_fifo_size_01<=32768)
-+ ifxusb_module_params.tx_fifo_size[ 1]=perio_tx_fifo_size_01;
-+ else
-+ ifxusb_module_params.tx_fifo_size[ 1]=default_param_perio_tx_fifo_size_01;
-+ if(perio_tx_fifo_size_02>=0 && perio_tx_fifo_size_02<=32768)
-+ ifxusb_module_params.tx_fifo_size[ 2]=perio_tx_fifo_size_02;
-+ else
-+ ifxusb_module_params.tx_fifo_size[ 2]=default_param_perio_tx_fifo_size_02;
-+ if(perio_tx_fifo_size_03>=0 && perio_tx_fifo_size_03<=32768)
-+ ifxusb_module_params.tx_fifo_size[ 3]=perio_tx_fifo_size_03;
-+ else
-+ ifxusb_module_params.tx_fifo_size[ 3]=default_param_perio_tx_fifo_size_03;
-+ if(perio_tx_fifo_size_04>=0 && perio_tx_fifo_size_04<=32768)
-+ ifxusb_module_params.tx_fifo_size[ 4]=perio_tx_fifo_size_04;
-+ else
-+ ifxusb_module_params.tx_fifo_size[ 4]=default_param_perio_tx_fifo_size_04;
-+ if(perio_tx_fifo_size_05>=0 && perio_tx_fifo_size_05<=32768)
-+ ifxusb_module_params.tx_fifo_size[ 5]=perio_tx_fifo_size_05;
-+ else
-+ ifxusb_module_params.tx_fifo_size[ 5]=default_param_perio_tx_fifo_size_05;
-+ if(perio_tx_fifo_size_06>=0 && perio_tx_fifo_size_06<=32768)
-+ ifxusb_module_params.tx_fifo_size[ 6]=perio_tx_fifo_size_06;
-+ else
-+ ifxusb_module_params.tx_fifo_size[ 6]=default_param_perio_tx_fifo_size_06;
-+ if(perio_tx_fifo_size_07>=0 && perio_tx_fifo_size_07<=32768)
-+ ifxusb_module_params.tx_fifo_size[ 7]=perio_tx_fifo_size_07;
-+ else
-+ ifxusb_module_params.tx_fifo_size[ 7]=default_param_perio_tx_fifo_size_07;
-+ if(perio_tx_fifo_size_08>=0 && perio_tx_fifo_size_08<=32768)
-+ ifxusb_module_params.tx_fifo_size[ 8]=perio_tx_fifo_size_08;
-+ else
-+ ifxusb_module_params.tx_fifo_size[ 8]=default_param_perio_tx_fifo_size_08;
-+ if(perio_tx_fifo_size_09>=0 && perio_tx_fifo_size_09<=32768)
-+ ifxusb_module_params.tx_fifo_size[ 9]=perio_tx_fifo_size_09;
-+ else
-+ ifxusb_module_params.tx_fifo_size[ 9]=default_param_perio_tx_fifo_size_09;
-+ if(perio_tx_fifo_size_10>=0 && perio_tx_fifo_size_10<=32768)
-+ ifxusb_module_params.tx_fifo_size[10]=perio_tx_fifo_size_10;
-+ else
-+ ifxusb_module_params.tx_fifo_size[10]=default_param_perio_tx_fifo_size_10;
-+ if(perio_tx_fifo_size_11>=0 && perio_tx_fifo_size_11<=32768)
-+ ifxusb_module_params.tx_fifo_size[11]=perio_tx_fifo_size_11;
-+ else
-+ ifxusb_module_params.tx_fifo_size[11]=default_param_perio_tx_fifo_size_11;
-+ if(perio_tx_fifo_size_12>=0 && perio_tx_fifo_size_12<=32768)
-+ ifxusb_module_params.tx_fifo_size[12]=perio_tx_fifo_size_12;
-+ else
-+ ifxusb_module_params.tx_fifo_size[12]=default_param_perio_tx_fifo_size_12;
-+ if(perio_tx_fifo_size_13>=0 && perio_tx_fifo_size_13<=32768)
-+ ifxusb_module_params.tx_fifo_size[13]=perio_tx_fifo_size_13;
-+ else
-+ ifxusb_module_params.tx_fifo_size[13]=default_param_perio_tx_fifo_size_13;
-+ if(perio_tx_fifo_size_14>=0 && perio_tx_fifo_size_14<=32768)
-+ ifxusb_module_params.tx_fifo_size[14]=perio_tx_fifo_size_14;
-+ else
-+ ifxusb_module_params.tx_fifo_size[14]=default_param_perio_tx_fifo_size_14;
-+ if(perio_tx_fifo_size_15>=0 && perio_tx_fifo_size_15<=32768)
-+ ifxusb_module_params.tx_fifo_size[15]=perio_tx_fifo_size_15;
-+ else
-+ ifxusb_module_params.tx_fifo_size[15]=default_param_perio_tx_fifo_size_15;
-+ #endif //__DED_FIFO__
-+ #endif //__IS_DEVICE__
-+}
-+
-+
-+
-+
-+
-+
-+
-+module_param(dbg_lvl, long, 0444);
-+MODULE_PARM_DESC(dbg_lvl, "Debug level.");
-+
-+module_param(dma_burst_size, short, 0444);
-+MODULE_PARM_DESC(dma_burst_size, "DMA Burst Size 0, 1, 4, 8, 16");
-+
-+module_param(speed, short, 0444);
-+MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed");
-+
-+module_param(data_fifo_size, long, 0444);
-+MODULE_PARM_DESC(data_fifo_size, "Total number of words in the data FIFO memory 32-32768");
-+
-+#ifdef __IS_DEVICE__
-+ module_param(rx_fifo_size, long, 0444);
-+ MODULE_PARM_DESC(rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
-+
-+ #ifdef __DED_FIFO__
-+ module_param(tx_fifo_size_00, long, 0444);
-+ MODULE_PARM_DESC(tx_fifo_size_00, "Number of words in the Tx FIFO #00 16-32768");
-+ module_param(tx_fifo_size_01, long, 0444);
-+ MODULE_PARM_DESC(tx_fifo_size_01, "Number of words in the Tx FIFO #01 0-32768");
-+ module_param(tx_fifo_size_02, long, 0444);
-+ MODULE_PARM_DESC(tx_fifo_size_02, "Number of words in the Tx FIFO #02 0-32768");
-+ module_param(tx_fifo_size_03, long, 0444);
-+ MODULE_PARM_DESC(tx_fifo_size_03, "Number of words in the Tx FIFO #03 0-32768");
-+ module_param(tx_fifo_size_04, long, 0444);
-+ MODULE_PARM_DESC(tx_fifo_size_04, "Number of words in the Tx FIFO #04 0-32768");
-+ module_param(tx_fifo_size_05, long, 0444);
-+ MODULE_PARM_DESC(tx_fifo_size_05, "Number of words in the Tx FIFO #05 0-32768");
-+ module_param(tx_fifo_size_06, long, 0444);
-+ MODULE_PARM_DESC(tx_fifo_size_06, "Number of words in the Tx FIFO #06 0-32768");
-+ module_param(tx_fifo_size_07, long, 0444);
-+ MODULE_PARM_DESC(tx_fifo_size_07, "Number of words in the Tx FIFO #07 0-32768");
-+ module_param(tx_fifo_size_08, long, 0444);
-+ MODULE_PARM_DESC(tx_fifo_size_08, "Number of words in the Tx FIFO #08 0-32768");
-+ module_param(tx_fifo_size_09, long, 0444);
-+ MODULE_PARM_DESC(tx_fifo_size_09, "Number of words in the Tx FIFO #09 0-32768");
-+ module_param(tx_fifo_size_10, long, 0444);
-+ MODULE_PARM_DESC(tx_fifo_size_10, "Number of words in the Tx FIFO #10 0-32768");
-+ module_param(tx_fifo_size_11, long, 0444);
-+ MODULE_PARM_DESC(tx_fifo_size_11, "Number of words in the Tx FIFO #11 0-32768");
-+ module_param(tx_fifo_size_12, long, 0444);
-+ MODULE_PARM_DESC(tx_fifo_size_12, "Number of words in the Tx FIFO #12 0-32768");
-+ module_param(tx_fifo_size_13, long, 0444);
-+ MODULE_PARM_DESC(tx_fifo_size_13, "Number of words in the Tx FIFO #13 0-32768");
-+ module_param(tx_fifo_size_14, long, 0444);
-+ MODULE_PARM_DESC(tx_fifo_size_14, "Number of words in the Tx FIFO #14 0-32768");
-+ module_param(tx_fifo_size_15, long, 0444);
-+ MODULE_PARM_DESC(tx_fifo_size_15, "Number of words in the Tx FIFO #15 0-32768");
-+
-+ module_param(thr_ctl, short, 0444);
-+ MODULE_PARM_DESC(thr_ctl, "0=Without 1=With Theshold Ctrl");
-+
-+ module_param(tx_thr_length, long, 0444);
-+ MODULE_PARM_DESC(tx_thr_length, "TX Threshold length");
-+
-+ module_param(rx_thr_length, long, 0444);
-+ MODULE_PARM_DESC(rx_thr_length, "RX Threshold length");
-+
-+ #else
-+ module_param(nperio_tx_fifo_size, long, 0444);
-+ MODULE_PARM_DESC(nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
-+
-+ module_param(perio_tx_fifo_size_01, long, 0444);
-+ MODULE_PARM_DESC(perio_tx_fifo_size_01, "Number of words in the periodic Tx FIFO #01 0-32768");
-+ module_param(perio_tx_fifo_size_02, long, 0444);
-+ MODULE_PARM_DESC(perio_tx_fifo_size_02, "Number of words in the periodic Tx FIFO #02 0-32768");
-+ module_param(perio_tx_fifo_size_03, long, 0444);
-+ MODULE_PARM_DESC(perio_tx_fifo_size_03, "Number of words in the periodic Tx FIFO #03 0-32768");
-+ module_param(perio_tx_fifo_size_04, long, 0444);
-+ MODULE_PARM_DESC(perio_tx_fifo_size_04, "Number of words in the periodic Tx FIFO #04 0-32768");
-+ module_param(perio_tx_fifo_size_05, long, 0444);
-+ MODULE_PARM_DESC(perio_tx_fifo_size_05, "Number of words in the periodic Tx FIFO #05 0-32768");
-+ module_param(perio_tx_fifo_size_06, long, 0444);
-+ MODULE_PARM_DESC(perio_tx_fifo_size_06, "Number of words in the periodic Tx FIFO #06 0-32768");
-+ module_param(perio_tx_fifo_size_07, long, 0444);
-+ MODULE_PARM_DESC(perio_tx_fifo_size_07, "Number of words in the periodic Tx FIFO #07 0-32768");
-+ module_param(perio_tx_fifo_size_08, long, 0444);
-+ MODULE_PARM_DESC(perio_tx_fifo_size_08, "Number of words in the periodic Tx FIFO #08 0-32768");
-+ module_param(perio_tx_fifo_size_09, long, 0444);
-+ MODULE_PARM_DESC(perio_tx_fifo_size_09, "Number of words in the periodic Tx FIFO #09 0-32768");
-+ module_param(perio_tx_fifo_size_10, long, 0444);
-+ MODULE_PARM_DESC(perio_tx_fifo_size_10, "Number of words in the periodic Tx FIFO #10 0-32768");
-+ module_param(perio_tx_fifo_size_11, long, 0444);
-+ MODULE_PARM_DESC(perio_tx_fifo_size_11, "Number of words in the periodic Tx FIFO #11 0-32768");
-+ module_param(perio_tx_fifo_size_12, long, 0444);
-+ MODULE_PARM_DESC(perio_tx_fifo_size_12, "Number of words in the periodic Tx FIFO #12 0-32768");
-+ module_param(perio_tx_fifo_size_13, long, 0444);
-+ MODULE_PARM_DESC(perio_tx_fifo_size_13, "Number of words in the periodic Tx FIFO #13 0-32768");
-+ module_param(perio_tx_fifo_size_14, long, 0444);
-+ MODULE_PARM_DESC(perio_tx_fifo_size_14, "Number of words in the periodic Tx FIFO #14 0-32768");
-+ module_param(perio_tx_fifo_size_15, long, 0444);
-+ MODULE_PARM_DESC(perio_tx_fifo_size_15, "Number of words in the periodic Tx FIFO #15 0-32768");
-+ #endif//__DED_FIFO__
-+ module_param(dev_endpoints, short, 0444);
-+ MODULE_PARM_DESC(dev_endpoints, "The number of endpoints in addition to EP0 available for device mode 1-15");
-+#endif
-+
-+#ifdef __IS_HOST__
-+ module_param(rx_fifo_size, long, 0444);
-+ MODULE_PARM_DESC(rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
-+
-+ module_param(nperio_tx_fifo_size, long, 0444);
-+ MODULE_PARM_DESC(nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768");
-+
-+ module_param(perio_tx_fifo_size, long, 0444);
-+ MODULE_PARM_DESC(perio_tx_fifo_size, "Number of words in the host periodic Tx FIFO 16-32768");
-+
-+ module_param(host_channels, short, 0444);
-+ MODULE_PARM_DESC(host_channels, "The number of host channel registers to use 1-16");
-+#endif
-+
-+module_param(max_transfer_size, long, 0444);
-+MODULE_PARM_DESC(max_transfer_size, "The maximum transfer size supported in bytes 2047-65535");
-+
-+module_param(max_packet_count, long, 0444);
-+MODULE_PARM_DESC(max_packet_count, "The maximum number of packets in a transfer 15-511");
-+
-+module_param(phy_utmi_width, long, 0444);
-+MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits");
-+
-+module_param(turn_around_time_hs, long, 0444);
-+MODULE_PARM_DESC(turn_around_time_hs, "Turn-Around time for HS");
-+
-+module_param(turn_around_time_fs, long, 0444);
-+MODULE_PARM_DESC(turn_around_time_fs, "Turn-Around time for FS");
-+
-+module_param(timeout_cal_hs, long, 0444);
-+MODULE_PARM_DESC(timeout_cal_hs, "Timeout Cal for HS");
-+
-+module_param(timeout_cal_fs, long, 0444);
-+MODULE_PARM_DESC(timeout_cal_fs, "Timeout Cal for FS");
-+
-+
---- /dev/null
-+++ b/drivers/usb/ifxhcd/ifxusb_plat.h
-@@ -0,0 +1,1018 @@
-+/*****************************************************************************
-+ ** FILE NAME : ifxusb_plat.h
-+ ** PROJECT : IFX USB sub-system V3
-+ ** MODULES : IFX USB sub-system Host and Device driver
-+ ** SRC VERSION : 1.0
-+ ** DATE : 1/Jan/2009
-+ ** AUTHOR : Chen, Howard
-+ ** DESCRIPTION : This file contains the Platform Specific constants, interfaces
-+ ** (functions and macros).
-+ ** FUNCTIONS :
-+ ** COMPILER : gcc
-+ ** REFERENCE : IFX hardware ref handbook for each plateforms
-+ ** COPYRIGHT :
-+ ** Version Control Section **
-+ ** $Author$
-+ ** $Date$
-+ ** $Revisions$
-+ ** $Log$ Revision history
-+ *****************************************************************************/
-+
-+
-+/*!
-+ \defgroup IFXUSB_PLATEFORM_DEFINITION Platform Specific constants, interfaces (functions and macros).
-+ \ingroup IFXUSB_DRIVER_V3
-+ \brief Maintain plateform specific definitions and macros in this file.
-+ Each plateform has its own definition zone.
-+ */
-+
-+/*!
-+ \defgroup IFXUSB_PLATEFORM_MEM_ADDR Definition of memory address and size and default parameters
-+ \ingroup IFXUSB_PLATEFORM_DEFINITION
-+ */
-+
-+/*!
-+ \defgroup IFXUSB_DBG_ROUTINE Routines for debug message
-+ \ingroup IFXUSB_PLATEFORM_DEFINITION
-+ */
-+
-+
-+/*! \file ifxusb_plat.h
-+ \ingroup IFXUSB_DRIVER_V3
-+ \brief This file contains the Platform Specific constants, interfaces (functions and macros).
-+*/
-+
-+#if !defined(__IFXUSB_PLAT_H__)
-+#define __IFXUSB_PLAT_H__
-+
-+
-+#include <linux/types.h>
-+#include <linux/slab.h>
-+#include <linux/list.h>
-+#include <linux/delay.h>
-+#include <asm/io.h>
-+
-+
-+#define IFXUSB_IOMEM_SIZE 0x00001000
-+#define IFXUSB_FIFOMEM_SIZE 0x00010000
-+#define IFXUSB_FIFODBG_SIZE 0x00020000
-+
-+
-+
-+/*!
-+ \addtogroup IFXUSB_PLATEFORM_MEM_ADDR
-+ */
-+/*@{*/
-+#if defined(__UEIP__)
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+// #define IFXUSB_IRQ 54
-+ #define IFXUSB_IOMEM_BASE 0x1e101000
-+ #define IFXUSB_FIFOMEM_BASE 0x1e120000
-+ #define IFXUSB_FIFODBG_BASE 0x1e140000
-+// #define IFXUSB_OC_IRQ 151
-+
-+ #ifndef DANUBE_RCU_BASE_ADDR
-+ #define DANUBE_RCU_BASE_ADDR (0xBF203000)
-+ #endif
-+
-+ #ifndef DANUBE_CGU
-+ #define DANUBE_CGU (0xBF103000)
-+ #endif
-+ #ifndef DANUBE_CGU_IFCCR
-+ #define DANUBE_CGU_IFCCR ((volatile unsigned long *)(DANUBE_CGU+ 0x0018))
-+ #endif
-+ #ifndef DANUBE_PMU
-+ #define DANUBE_PMU (KSEG1+0x1F102000)
-+ #endif
-+ #ifndef DANUBE_PMU_PWDCR
-+ #define DANUBE_PMU_PWDCR ((volatile unsigned long *)(DANUBE_PMU+0x001C))
-+ #endif
-+
-+ #ifndef DANUBE_GPIO_P0_OUT
-+ #define DANUBE_GPIO_P0_OUT (0xBF103000+0x10)
-+ #define DANUBE_GPIO_P0_DIR (0xBF103000+0x18)
-+ #define DANUBE_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
-+ #define DANUBE_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
-+ #define DANUBE_GPIO_P0_OD (0xBF103000+0x24)
-+ #define DANUBE_GPIO_P0_PUDSEL (0xBF103000+0x2C)
-+ #define DANUBE_GPIO_P0_PUDEN (0xBF103000+0x30)
-+ #define DANUBE_GPIO_P1_OUT (0xBF103000+0x40)
-+ #define DANUBE_GPIO_P1_DIR (0xBF103000+0x48)
-+ #define DANUBE_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
-+ #define DANUBE_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
-+ #define DANUBE_GPIO_P1_OD (0xBF103000+0x54)
-+ #define DANUBE_GPIO_P1_PUDSEL (0xBF103000+0x5C)
-+ #define DANUBE_GPIO_P1_PUDEN (0xBF103000+0x60)
-+ #endif
-+
-+ #define DANUBE_RCU_USBCFG ((volatile unsigned long *)(DANUBE_RCU_BASE_ADDR + 0x18))
-+ #define DANUBE_RCU_RESET ((volatile unsigned long *)(DANUBE_RCU_BASE_ADDR + 0x10))
-+ #define DANUBE_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
-+ #define DANUBE_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
-+ #define DANUBE_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end
-+
-+ #define default_param_dma_burst_size 4
-+
-+ #define default_param_speed IFXUSB_PARAM_SPEED_HIGH
-+
-+ #define default_param_max_transfer_size -1 //(Max, hwcfg)
-+ #define default_param_max_packet_count -1 //(Max, hwcfg)
-+ #define default_param_phy_utmi_width 16
-+
-+ #define default_param_turn_around_time_hs 4
-+ #define default_param_turn_around_time_fs 4
-+ #define default_param_timeout_cal_hs -1 //(NoChange)
-+ #define default_param_timeout_cal_fs -1 //(NoChange)
-+
-+ #define default_param_data_fifo_size -1 //(Max, hwcfg)
-+
-+ #ifdef __IS_HOST__
-+ #define default_param_host_channels -1 //(Max, hwcfg)
-+ #define default_param_rx_fifo_size 640
-+ #define default_param_nperio_tx_fifo_size 640
-+ #define default_param_perio_tx_fifo_size 768
-+ #endif //__IS_HOST__
-+
-+ #ifdef __IS_DEVICE__
-+ #ifdef __DED_INTR__
-+ #define default_param_rx_fifo_size 1024
-+ #define default_param_nperio_tx_fifo_size 1016
-+ #define default_param_perio_tx_fifo_size_01 8
-+ #else
-+ #define default_param_rx_fifo_size 1024
-+ #define default_param_nperio_tx_fifo_size 1024
-+ #define default_param_perio_tx_fifo_size_01 0
-+ #endif
-+ #define default_param_perio_tx_fifo_size_02 0
-+ #define default_param_perio_tx_fifo_size_03 0
-+ #define default_param_perio_tx_fifo_size_04 0
-+ #define default_param_perio_tx_fifo_size_05 0
-+ #define default_param_perio_tx_fifo_size_06 0
-+ #define default_param_perio_tx_fifo_size_07 0
-+ #define default_param_perio_tx_fifo_size_08 0
-+ #define default_param_perio_tx_fifo_size_09 0
-+ #define default_param_perio_tx_fifo_size_10 0
-+ #define default_param_perio_tx_fifo_size_11 0
-+ #define default_param_perio_tx_fifo_size_12 0
-+ #define default_param_perio_tx_fifo_size_13 0
-+ #define default_param_perio_tx_fifo_size_14 0
-+ #define default_param_perio_tx_fifo_size_15 0
-+ #endif //__IS_DEVICE__
-+
-+ #elif defined(__IS_AMAZON_SE__)
-+ //#include <asm/amazon_se/amazon_se.h>
-+ //#include <asm/amazon_se/irq.h>
-+
-+// #define IFXUSB_IRQ 31
-+ #define IFXUSB_IOMEM_BASE 0x1e101000
-+ #define IFXUSB_FIFOMEM_BASE 0x1e120000
-+ #define IFXUSB_FIFODBG_BASE 0x1e140000
-+// #define IFXUSB_OC_IRQ 20
-+
-+ #ifndef AMAZON_SE_RCU_BASE_ADDR
-+ #define AMAZON_SE_RCU_BASE_ADDR (0xBF203000)
-+ #endif
-+ #define AMAZON_SE_RCU_USBCFG ((volatile unsigned long *)(AMAZON_SE_RCU_BASE_ADDR + 0x18))
-+ #define AMAZON_SE_RCU_RESET ((volatile unsigned long *)(AMAZON_SE_RCU_BASE_ADDR + 0x10))
-+ #define AMAZON_SE_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
-+ #define AMAZON_SE_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
-+ #define AMAZON_SE_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end
-+
-+ #ifndef AMAZON_SE_GPIO_P0_OUT
-+ #define AMAZON_SE_GPIO_P0_OUT (0xBF103000+0x10)
-+ #define AMAZON_SE_GPIO_P0_DIR (0xBF103000+0x18)
-+ #define AMAZON_SE_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
-+ #define AMAZON_SE_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
-+ #define AMAZON_SE_GPIO_P0_OD (0xBF103000+0x24)
-+ #define AMAZON_SE_GPIO_P0_PUDSEL (0xBF103000+0x2C)
-+ #define AMAZON_SE_GPIO_P0_PUDEN (0xBF103000+0x30)
-+ #define AMAZON_SE_GPIO_P1_OUT (0xBF103000+0x40)
-+ #define AMAZON_SE_GPIO_P1_DIR (0xBF103000+0x48)
-+ #define AMAZON_SE_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
-+ #define AMAZON_SE_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
-+ #define AMAZON_SE_GPIO_P1_OD (0xBF103000+0x54)
-+ #define AMAZON_SE_GPIO_P1_PUDSEL (0xBF103000+0x5C)
-+ #define AMAZON_SE_GPIO_P1_PUDEN (0xBF103000+0x60)
-+ #endif
-+
-+ #ifndef AMAZON_SE_CGU
-+ #define AMAZON_SE_CGU (0xBF103000)
-+ #endif
-+ #ifndef AMAZON_SE_CGU_IFCCR
-+ #define AMAZON_SE_CGU_IFCCR ((volatile unsigned long *)(AMAZON_SE_CGU+ 0x0018))
-+ #endif
-+ #ifndef AMAZON_SE_PMU
-+ #define AMAZON_SE_PMU (KSEG1+0x1F102000)
-+ #endif
-+ #ifndef AMAZON_SE_PMU_PWDCR
-+ #define AMAZON_SE_PMU_PWDCR ((volatile unsigned long *)(AMAZON_SE_PMU+0x001C))
-+ #endif
-+
-+ #define default_param_dma_burst_size 4
-+
-+ #define default_param_speed IFXUSB_PARAM_SPEED_HIGH
-+
-+ #define default_param_max_transfer_size -1 //(Max, hwcfg)
-+ #define default_param_max_packet_count -1 //(Max, hwcfg)
-+ #define default_param_phy_utmi_width 16
-+
-+ #define default_param_turn_around_time_hs 4 //(NoChange)
-+ #define default_param_turn_around_time_fs 4 //(NoChange)
-+ #define default_param_timeout_cal_hs -1 //(NoChange)
-+ #define default_param_timeout_cal_fs -1 //(NoChange)
-+
-+ #define default_param_data_fifo_size -1 //(Max, hwcfg)
-+
-+ #ifdef __IS_HOST__
-+ #define default_param_host_channels -1 //(Max, hwcfg)
-+ #define default_param_rx_fifo_size 240
-+ #define default_param_nperio_tx_fifo_size 240
-+ #define default_param_perio_tx_fifo_size 32
-+ #endif //__IS_HOST__
-+ #ifdef __IS_DEVICE__
-+ #ifdef __DED_INTR__
-+ #define default_param_rx_fifo_size 256
-+ #define default_param_nperio_tx_fifo_size 248
-+ #define default_param_perio_tx_fifo_size_01 8
-+ #else
-+ #define default_param_rx_fifo_size 256
-+ #define default_param_nperio_tx_fifo_size 256
-+ #define default_param_perio_tx_fifo_size_01 0
-+ #endif
-+ #define default_param_perio_tx_fifo_size_02 0
-+ #define default_param_perio_tx_fifo_size_03 0
-+ #define default_param_perio_tx_fifo_size_04 0
-+ #define default_param_perio_tx_fifo_size_05 0
-+ #define default_param_perio_tx_fifo_size_06 0
-+ #define default_param_perio_tx_fifo_size_07 0
-+ #define default_param_perio_tx_fifo_size_08 0
-+ #define default_param_perio_tx_fifo_size_09 0
-+ #define default_param_perio_tx_fifo_size_10 0
-+ #define default_param_perio_tx_fifo_size_11 0
-+ #define default_param_perio_tx_fifo_size_12 0
-+ #define default_param_perio_tx_fifo_size_13 0
-+ #define default_param_perio_tx_fifo_size_14 0
-+ #define default_param_perio_tx_fifo_size_15 0
-+ #endif //__IS_DEVICE__
-+
-+ #elif defined(__IS_AR9__)
-+// #define IFXUSB1_IRQ 54
-+ #define IFXUSB1_IOMEM_BASE 0x1E101000
-+ #define IFXUSB1_FIFOMEM_BASE 0x1E120000
-+ #define IFXUSB1_FIFODBG_BASE 0x1E140000
-+
-+// #define IFXUSB2_IRQ 83
-+ #define IFXUSB2_IOMEM_BASE 0x1E106000
-+ #define IFXUSB2_FIFOMEM_BASE 0x1E1E0000
-+ #define IFXUSB2_FIFODBG_BASE 0x1E1C0000
-+
-+// #define IFXUSB_OC_IRQ 60
-+
-+ #ifndef AR9_RCU_BASE_ADDR
-+ #define AR9_RCU_BASE_ADDR (0xBF203000)
-+ #endif
-+
-+ #ifndef AR9_CGU
-+ #define AR9_CGU (0xBF103000)
-+ #endif
-+ #ifndef AR9_CGU_IFCCR
-+ #define AR9_CGU_IFCCR ((volatile unsigned long *)(AR9_CGU+ 0x0018))
-+ #endif
-+
-+ #ifndef AR9_PMU
-+ #define AR9_PMU (KSEG1+0x1F102000)
-+ #endif
-+ #ifndef AR9_PMU_PWDCR
-+ #define AR9_PMU_PWDCR ((volatile unsigned long *)(AR9_PMU+0x001C))
-+ #endif
-+
-+ #ifndef AR9_GPIO_P0_OUT
-+ #define AR9_GPIO_P0_OUT (0xBF103000+0x10)
-+ #define AR9_GPIO_P0_DIR (0xBF103000+0x18)
-+ #define AR9_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
-+ #define AR9_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
-+ #define AR9_GPIO_P0_OD (0xBF103000+0x24)
-+ #define AR9_GPIO_P0_PUDSEL (0xBF103000+0x2C)
-+ #define AR9_GPIO_P0_PUDEN (0xBF103000+0x30)
-+ #define AR9_GPIO_P1_OUT (0xBF103000+0x40)
-+ #define AR9_GPIO_P1_DIR (0xBF103000+0x48)
-+ #define AR9_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
-+ #define AR9_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
-+ #define AR9_GPIO_P1_OD (0xBF103000+0x54)
-+ #define AR9_GPIO_P1_PUDSEL (0xBF103000+0x5C)
-+ #define AR9_GPIO_P1_PUDEN (0xBF103000+0x60)
-+ #endif
-+
-+ #define AR9_RCU_USB1CFG ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x18))
-+ #define AR9_RCU_USB2CFG ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x34))
-+ #define AR9_RCU_USBRESET ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x10))
-+ #define AR9_USBCFG_ARB 7 //
-+ #define AR9_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
-+ #define AR9_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
-+ #define AR9_USBCFG_SLV_END_BIT 17 // 0:little_end, 1:big_end
-+
-+ #define default_param_dma_burst_size 4
-+
-+ #define default_param_speed IFXUSB_PARAM_SPEED_HIGH
-+
-+ #define default_param_max_transfer_size -1 //(Max, hwcfg)
-+ #define default_param_max_packet_count -1 //(Max, hwcfg)
-+ #define default_param_phy_utmi_width 16
-+
-+ #define default_param_turn_around_time_hs 4 //(NoChange)
-+ #define default_param_turn_around_time_fs 4 //(NoChange)
-+ #define default_param_timeout_cal_hs -1 //(NoChange)
-+ #define default_param_timeout_cal_fs -1 //(NoChange)
-+
-+ #define default_param_data_fifo_size -1 //(Max, hwcfg)
-+
-+ #ifdef __IS_HOST__
-+ #define default_param_host_channels -1 //(Max, hwcfg)
-+ #define default_param_rx_fifo_size 240
-+ #define default_param_nperio_tx_fifo_size 240
-+ #define default_param_perio_tx_fifo_size 32
-+ #endif //__IS_HOST__
-+ #ifdef __IS_DEVICE__
-+ #ifdef __DED_INTR__
-+ #define default_param_rx_fifo_size 256
-+// #define default_param_nperio_tx_fifo_size 248
-+// #define default_param_perio_tx_fifo_size_01 8
-+ #define default_param_nperio_tx_fifo_size 252
-+ #define default_param_perio_tx_fifo_size_01 4
-+ #else
-+ #define default_param_rx_fifo_size 256
-+ #define default_param_nperio_tx_fifo_size 256
-+ #define default_param_perio_tx_fifo_size_01 0
-+ #endif
-+ #define default_param_perio_tx_fifo_size_02 0
-+ #define default_param_perio_tx_fifo_size_03 0
-+ #define default_param_perio_tx_fifo_size_04 0
-+ #define default_param_perio_tx_fifo_size_05 0
-+ #define default_param_perio_tx_fifo_size_06 0
-+ #define default_param_perio_tx_fifo_size_07 0
-+ #define default_param_perio_tx_fifo_size_08 0
-+ #define default_param_perio_tx_fifo_size_09 0
-+ #define default_param_perio_tx_fifo_size_10 0
-+ #define default_param_perio_tx_fifo_size_11 0
-+ #define default_param_perio_tx_fifo_size_12 0
-+ #define default_param_perio_tx_fifo_size_13 0
-+ #define default_param_perio_tx_fifo_size_14 0
-+ #define default_param_perio_tx_fifo_size_15 0
-+ #endif //__IS_DEVICE__
-+
-+ #elif defined(__IS_VR9__)
-+// #define IFXUSB1_IRQ 54
-+ #define IFXUSB1_IOMEM_BASE 0x1E101000
-+ #define IFXUSB1_FIFOMEM_BASE 0x1E120000
-+ #define IFXUSB1_FIFODBG_BASE 0x1E140000
-+
-+// #define IFXUSB2_IRQ 83
-+ #define IFXUSB2_IOMEM_BASE 0x1E106000
-+ #define IFXUSB2_FIFOMEM_BASE 0x1E1E0000
-+ #define IFXUSB2_FIFODBG_BASE 0x1E1C0000
-+// #define IFXUSB_OC_IRQ 60
-+
-+ #ifndef VR9_RCU_BASE_ADDR
-+ #define VR9_RCU_BASE_ADDR (0xBF203000)
-+ #endif
-+
-+ #ifndef VR9_CGU
-+ #define VR9_CGU (0xBF103000)
-+ #endif
-+ #ifndef VR9_CGU_IFCCR
-+ #define VR9_CGU_IFCCR ((volatile unsigned long *)(VR9_CGU+ 0x0018))
-+ #endif
-+
-+ #ifndef VR9_PMU
-+ #define VR9_PMU (KSEG1+0x1F102000)
-+ #endif
-+ #ifndef VR9_PMU_PWDCR
-+ #define VR9_PMU_PWDCR ((volatile unsigned long *)(VR9_PMU+0x001C))
-+ #endif
-+
-+ #ifndef VR9_GPIO_P0_OUT
-+ #define VR9_GPIO_P0_OUT (0xBF103000+0x10)
-+ #define VR9_GPIO_P0_DIR (0xBF103000+0x18)
-+ #define VR9_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
-+ #define VR9_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
-+ #define VR9_GPIO_P0_OD (0xBF103000+0x24)
-+ #define VR9_GPIO_P0_PUDSEL (0xBF103000+0x2C)
-+ #define VR9_GPIO_P0_PUDEN (0xBF103000+0x30)
-+ #define VR9_GPIO_P1_OUT (0xBF103000+0x40)
-+ #define VR9_GPIO_P1_DIR (0xBF103000+0x48)
-+ #define VR9_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
-+ #define VR9_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
-+ #define VR9_GPIO_P1_OD (0xBF103000+0x54)
-+ #define VR9_GPIO_P1_PUDSEL (0xBF103000+0x5C)
-+ #define VR9_GPIO_P1_PUDEN (0xBF103000+0x60)
-+ #endif
-+
-+ #define VR9_RCU_USB1CFG ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x18))
-+ #define VR9_RCU_USB2CFG ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x34))
-+ #define VR9_RCU_USB_ANA_CFG1A ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x38))
-+ #define VR9_RCU_USB_ANA_CFG1B ((volatile unsigned long *)(AR9_RCU_BASE_ADDR + 0x3C))
-+ #define VR9_RCU_USBRESET ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x10))
-+ #define VR9_RCU_USBRESET2 ((volatile unsigned long *)(VR9_RCU_BASE_ADDR + 0x48))
-+ #define VR9_USBCFG_ARB 7 //
-+ #define VR9_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
-+ #define VR9_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
-+ #define VR9_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end
-+
-+ /*== AVM/BC 20101220 Workaround VR9 DMA burst size ==
-+ * Using 2 Devices in diferent ports cause a general USB Host Error.
-+ * Workaround found in UGW4.3
-+ */
-+// #define default_param_dma_burst_size 4 //(ALL)
-+ //WA for AHB
-+ #define default_param_dma_burst_size 0 //(ALL)
-+
-+ #define default_param_speed IFXUSB_PARAM_SPEED_HIGH
-+
-+ #define default_param_max_transfer_size -1 //(Max, hwcfg)
-+ #define default_param_max_packet_count -1 //(Max, hwcfg)
-+ #define default_param_phy_utmi_width 16
-+
-+ #define default_param_turn_around_time_hs 6 //(NoChange) snpsid >= 0x4f54260a
-+ #define default_param_turn_around_time_fs 6 //(NoChange) snpsid >= 0x4f54260a
-+ #define default_param_timeout_cal_hs -1 //(NoChange)
-+ #define default_param_timeout_cal_fs -1 //(NoChange)
-+
-+ #define default_param_data_fifo_size -1 //(Max, hwcfg)
-+
-+ #ifdef __IS_HOST__
-+ #define default_param_host_channels -1 //(Max, hwcfg)
-+ #define default_param_rx_fifo_size 240
-+ #define default_param_nperio_tx_fifo_size 240
-+ #define default_param_perio_tx_fifo_size 32
-+ #endif //__IS_HOST__
-+ #ifdef __IS_DEVICE__
-+#if 0
-+ #define default_param_rx_fifo_size 256
-+ #define default_param_tx_fifo_size_00 -1
-+ #define default_param_tx_fifo_size_01 -1
-+ #define default_param_tx_fifo_size_02 -1
-+#else
-+ #define default_param_rx_fifo_size 256
-+ #define default_param_tx_fifo_size_00 32
-+ #define default_param_tx_fifo_size_01 200
-+ #define default_param_tx_fifo_size_02 8
-+#endif
-+ #define default_param_tx_fifo_size_03 -1
-+ #define default_param_tx_fifo_size_04 -1
-+ #define default_param_tx_fifo_size_05 -1
-+ #define default_param_tx_fifo_size_06 -1
-+ #define default_param_tx_fifo_size_07 -1
-+ #define default_param_tx_fifo_size_08 -1
-+ #define default_param_tx_fifo_size_09 -1
-+ #define default_param_tx_fifo_size_10 -1
-+ #define default_param_tx_fifo_size_11 -1
-+ #define default_param_tx_fifo_size_12 -1
-+ #define default_param_tx_fifo_size_13 -1
-+ #define default_param_tx_fifo_size_14 -1
-+ #define default_param_tx_fifo_size_15 -1
-+ #define default_param_dma_unalgned_tx -1
-+ #define default_param_dma_unalgned_rx -1
-+ #define default_param_thr_ctl -1
-+ #define default_param_tx_thr_length -1
-+ #define default_param_rx_thr_length -1
-+ #endif //__IS_DEVICE__
-+ #else // __IS_VR9__
-+ #error "Please choose one platform!!"
-+ #endif // __IS_VR9__
-+
-+#else //UEIP
-+ #if defined(__IS_TWINPASS__) || defined(__IS_DANUBE__)
-+// #define IFXUSB_IRQ 54
-+ #define IFXUSB_IOMEM_BASE 0x1e101000
-+ #define IFXUSB_FIFOMEM_BASE 0x1e120000
-+ #define IFXUSB_FIFODBG_BASE 0x1e140000
-+// #define IFXUSB_OC_IRQ 151
-+
-+
-+ #ifndef DANUBE_RCU_BASE_ADDR
-+ #define DANUBE_RCU_BASE_ADDR (0xBF203000)
-+ #endif
-+
-+ #ifndef DANUBE_CGU
-+ #define DANUBE_CGU (0xBF103000)
-+ #endif
-+ #ifndef DANUBE_CGU_IFCCR
-+ #define DANUBE_CGU_IFCCR ((volatile unsigned long *)(DANUBE_CGU+ 0x0018))
-+ #endif
-+ #ifndef DANUBE_PMU
-+ #define DANUBE_PMU (KSEG1+0x1F102000)
-+ #endif
-+ #ifndef DANUBE_PMU_PWDCR
-+ #define DANUBE_PMU_PWDCR ((volatile unsigned long *)(DANUBE_PMU+0x001C))
-+ #endif
-+
-+ #ifndef DANUBE_GPIO_P0_OUT
-+ #define DANUBE_GPIO_P0_OUT (0xBF103000+0x10)
-+ #define DANUBE_GPIO_P0_DIR (0xBF103000+0x18)
-+ #define DANUBE_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
-+ #define DANUBE_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
-+ #define DANUBE_GPIO_P0_OD (0xBF103000+0x24)
-+ #define DANUBE_GPIO_P0_PUDSEL (0xBF103000+0x2C)
-+ #define DANUBE_GPIO_P0_PUDEN (0xBF103000+0x30)
-+ #define DANUBE_GPIO_P1_OUT (0xBF103000+0x40)
-+ #define DANUBE_GPIO_P1_DIR (0xBF103000+0x48)
-+ #define DANUBE_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
-+ #define DANUBE_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
-+ #define DANUBE_GPIO_P1_OD (0xBF103000+0x54)
-+ #define DANUBE_GPIO_P1_PUDSEL (0xBF103000+0x5C)
-+ #define DANUBE_GPIO_P1_PUDEN (0xBF103000+0x60)
-+ #endif
-+
-+
-+ #define DANUBE_RCU_USBCFG ((volatile unsigned long *)(DANUBE_RCU_BASE_ADDR + 0x18))
-+ #define DANUBE_RCU_RESET ((volatile unsigned long *)(DANUBE_RCU_BASE_ADDR + 0x10))
-+ #define DANUBE_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
-+ #define DANUBE_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
-+ #define DANUBE_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end
-+
-+ #define default_param_dma_burst_size 4
-+
-+ #define default_param_speed IFXUSB_PARAM_SPEED_HIGH
-+
-+ #define default_param_max_transfer_size -1 //(Max, hwcfg)
-+ #define default_param_max_packet_count -1 //(Max, hwcfg)
-+ #define default_param_phy_utmi_width 16
-+
-+ #define default_param_turn_around_time_hs 4 //(NoChange)
-+ #define default_param_turn_around_time_fs 4 //(NoChange)
-+ #define default_param_timeout_cal_hs -1 //(NoChange)
-+ #define default_param_timeout_cal_fs -1 //(NoChange)
-+
-+ #define default_param_data_fifo_size -1 //(Max, hwcfg)
-+ #ifdef __IS_HOST__
-+ #define default_param_host_channels -1 //(Max, hwcfg)
-+ #define default_param_rx_fifo_size 640
-+ #define default_param_nperio_tx_fifo_size 640
-+ #define default_param_perio_tx_fifo_size 768
-+ #endif //__IS_HOST__
-+
-+ #ifdef __IS_DEVICE__
-+ #ifdef __DED_INTR__
-+ #define default_param_rx_fifo_size 1024
-+ #define default_param_nperio_tx_fifo_size 1016
-+ #define default_param_perio_tx_fifo_size_01 8
-+ #else
-+ #define default_param_rx_fifo_size 1024
-+ #define default_param_nperio_tx_fifo_size 1024
-+ #define default_param_perio_tx_fifo_size_01 0
-+ #endif
-+ #define default_param_perio_tx_fifo_size_02 0
-+ #define default_param_perio_tx_fifo_size_03 0
-+ #define default_param_perio_tx_fifo_size_04 0
-+ #define default_param_perio_tx_fifo_size_05 0
-+ #define default_param_perio_tx_fifo_size_06 0
-+ #define default_param_perio_tx_fifo_size_07 0
-+ #define default_param_perio_tx_fifo_size_08 0
-+ #define default_param_perio_tx_fifo_size_09 0
-+ #define default_param_perio_tx_fifo_size_10 0
-+ #define default_param_perio_tx_fifo_size_11 0
-+ #define default_param_perio_tx_fifo_size_12 0
-+ #define default_param_perio_tx_fifo_size_13 0
-+ #define default_param_perio_tx_fifo_size_14 0
-+ #define default_param_perio_tx_fifo_size_15 0
-+ #endif //__IS_DEVICE__
-+
-+ #elif defined(__IS_AMAZON_SE__)
-+ #include <asm/amazon_se/amazon_se.h>
-+ //#include <asm/amazon_se/irq.h>
-+
-+// #define IFXUSB_IRQ 31
-+ #define IFXUSB_IOMEM_BASE 0x1e101000
-+ #define IFXUSB_FIFOMEM_BASE 0x1e120000
-+ #define IFXUSB_FIFODBG_BASE 0x1e140000
-+// #define IFXUSB_OC_IRQ 20
-+
-+ #define AMAZON_SE_RCU_USBCFG ((volatile unsigned long *)(AMAZON_SE_RCU_BASE_ADDR + 0x18))
-+ #define AMAZON_SE_RCU_RESET ((volatile unsigned long *)(AMAZON_SE_RCU_BASE_ADDR + 0x10))
-+ #define AMAZON_SE_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
-+ #define AMAZON_SE_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
-+ #define AMAZON_SE_USBCFG_SLV_END_BIT 9 // 0:little_end, 1:big_end
-+
-+ #ifndef AMAZON_SE_GPIO_P0_OUT
-+ #define AMAZON_SE_GPIO_P0_OUT (0xBF103000+0x10)
-+ #define AMAZON_SE_GPIO_P0_DIR (0xBF103000+0x18)
-+ #define AMAZON_SE_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
-+ #define AMAZON_SE_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
-+ #define AMAZON_SE_GPIO_P0_OD (0xBF103000+0x24)
-+ #define AMAZON_SE_GPIO_P0_PUDSEL (0xBF103000+0x2C)
-+ #define AMAZON_SE_GPIO_P0_PUDEN (0xBF103000+0x30)
-+ #define AMAZON_SE_GPIO_P1_OUT (0xBF103000+0x40)
-+ #define AMAZON_SE_GPIO_P1_DIR (0xBF103000+0x48)
-+ #define AMAZON_SE_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
-+ #define AMAZON_SE_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
-+ #define AMAZON_SE_GPIO_P1_OD (0xBF103000+0x54)
-+ #define AMAZON_SE_GPIO_P1_PUDSEL (0xBF103000+0x5C)
-+ #define AMAZON_SE_GPIO_P1_PUDEN (0xBF103000+0x60)
-+ #endif
-+
-+
-+ #ifndef AMAZON_SE_CGU
-+ #define AMAZON_SE_CGU (0xBF103000)
-+ #endif
-+ #ifndef AMAZON_SE_CGU_IFCCR
-+ #define AMAZON_SE_CGU_IFCCR ((volatile unsigned long *)(AMAZON_SE_CGU+ 0x0018))
-+ #endif
-+ #ifndef AMAZON_SE_PMU
-+ #define AMAZON_SE_PMU (KSEG1+0x1F102000)
-+ #endif
-+ #ifndef AMAZON_SE_PMU_PWDCR
-+ #define AMAZON_SE_PMU_PWDCR ((volatile unsigned long *)(AMAZON_SE_PMU+0x001C))
-+ #endif
-+
-+ #define default_param_dma_burst_size 4
-+
-+ #define default_param_speed IFXUSB_PARAM_SPEED_HIGH
-+
-+ #define default_param_max_transfer_size -1 //(Max, hwcfg)
-+ #define default_param_max_packet_count -1 //(Max, hwcfg)
-+ #define default_param_phy_utmi_width 16
-+
-+ #define default_param_turn_around_time_hs 4 //(NoChange)
-+ #define default_param_turn_around_time_fs 4 //(NoChange)
-+ #define default_param_timeout_cal_hs -1 //(NoChange)
-+ #define default_param_timeout_cal_fs -1 //(NoChange)
-+
-+ #define default_param_data_fifo_size -1 //(Max, hwcfg)
-+
-+ #ifdef __IS_HOST__
-+ #define default_param_host_channels -1 //(Max, hwcfg)
-+ #define default_param_rx_fifo_size 240
-+ #define default_param_nperio_tx_fifo_size 240
-+ #define default_param_perio_tx_fifo_size 32
-+ #endif //__IS_HOST__
-+ #ifdef __IS_DEVICE__
-+ #ifdef __DED_INTR__
-+ #define default_param_rx_fifo_size 256
-+ #define default_param_nperio_tx_fifo_size 248
-+ #define default_param_perio_tx_fifo_size_01 8
-+ #else
-+ #define default_param_rx_fifo_size 256
-+ #define default_param_nperio_tx_fifo_size 256
-+ #define default_param_perio_tx_fifo_size_01 0
-+ #endif
-+ #define default_param_perio_tx_fifo_size_02 0
-+ #define default_param_perio_tx_fifo_size_03 0
-+ #define default_param_perio_tx_fifo_size_04 0
-+ #define default_param_perio_tx_fifo_size_05 0
-+ #define default_param_perio_tx_fifo_size_06 0
-+ #define default_param_perio_tx_fifo_size_07 0
-+ #define default_param_perio_tx_fifo_size_08 0
-+ #define default_param_perio_tx_fifo_size_09 0
-+ #define default_param_perio_tx_fifo_size_10 0
-+ #define default_param_perio_tx_fifo_size_11 0
-+ #define default_param_perio_tx_fifo_size_12 0
-+ #define default_param_perio_tx_fifo_size_13 0
-+ #define default_param_perio_tx_fifo_size_14 0
-+ #define default_param_perio_tx_fifo_size_15 0
-+ #endif //__IS_DEVICE__
-+
-+ #elif defined(__IS_AR9__)
-+// #define IFXUSB1_IRQ 54
-+ #define IFXUSB1_IOMEM_BASE 0x1E101000
-+ #define IFXUSB1_FIFOMEM_BASE 0x1E120000
-+ #define IFXUSB1_FIFODBG_BASE 0x1E140000
-+
-+// #define IFXUSB2_IRQ 83
-+ #define IFXUSB2_IOMEM_BASE 0x1E106000
-+ #define IFXUSB2_FIFOMEM_BASE 0x1E1E0000
-+ #define IFXUSB2_FIFODBG_BASE 0x1E1C0000
-+
-+// #define IFXUSB_OC_IRQ 60
-+
-+ #ifndef AMAZON_S_RCU_BASE_ADDR
-+ #define AMAZON_S_RCU_BASE_ADDR (0xBF203000)
-+ #endif
-+
-+ #ifndef AMAZON_S_CGU
-+ #define AMAZON_S_CGU (0xBF103000)
-+ #endif
-+ #ifndef AMAZON_S_CGU_IFCCR
-+ #define AMAZON_S_CGU_IFCCR ((volatile unsigned long *)(AMAZON_S_CGU+ 0x0018))
-+ #endif
-+
-+ #ifndef AMAZON_S_PMU
-+ #define AMAZON_S_PMU (KSEG1+0x1F102000)
-+ #endif
-+ #ifndef AMAZON_S_PMU_PWDCR
-+ #define AMAZON_S_PMU_PWDCR ((volatile unsigned long *)(AMAZON_S_PMU+0x001C))
-+ #endif
-+
-+ #ifndef AMAZON_S_GPIO_P0_OUT
-+ #define AMAZON_S_GPIO_P0_OUT (0xBF103000+0x10)
-+ #define AMAZON_S_GPIO_P0_DIR (0xBF103000+0x18)
-+ #define AMAZON_S_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
-+ #define AMAZON_S_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
-+ #define AMAZON_S_GPIO_P0_OD (0xBF103000+0x24)
-+ #define AMAZON_S_GPIO_P0_PUDSEL (0xBF103000+0x2C)
-+ #define AMAZON_S_GPIO_P0_PUDEN (0xBF103000+0x30)
-+ #define AMAZON_S_GPIO_P1_OUT (0xBF103000+0x40)
-+ #define AMAZON_S_GPIO_P1_DIR (0xBF103000+0x48)
-+ #define AMAZON_S_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
-+ #define AMAZON_S_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
-+ #define AMAZON_S_GPIO_P1_OD (0xBF103000+0x54)
-+ #define AMAZON_S_GPIO_P1_PUDSEL (0xBF103000+0x5C)
-+ #define AMAZON_S_GPIO_P1_PUDEN (0xBF103000+0x60)
-+ #endif
-+
-+ #define AMAZON_S_RCU_USB1CFG ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x18))
-+ #define AMAZON_S_RCU_USB2CFG ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x34))
-+ #define AMAZON_S_RCU_USBRESET ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x10))
-+ #define AMAZON_S_USBCFG_ARB 7 //
-+ #define AMAZON_S_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
-+ #define AMAZON_S_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
-+ #define AMAZON_S_USBCFG_SLV_END_BIT 17 // 0:little_end, 1:big_end
-+
-+ #define default_param_dma_burst_size 4
-+
-+ #define default_param_speed IFXUSB_PARAM_SPEED_HIGH
-+
-+ #define default_param_max_transfer_size -1 //(Max, hwcfg)
-+ #define default_param_max_packet_count -1 //(Max, hwcfg)
-+ #define default_param_phy_utmi_width 16
-+
-+ #define default_param_turn_around_time_hs 4 //(NoChange)
-+ #define default_param_turn_around_time_fs 4 //(NoChange)
-+ #define default_param_timeout_cal_hs -1 //(NoChange)
-+ #define default_param_timeout_cal_fs -1 //(NoChange)
-+
-+ #define default_param_data_fifo_size -1 //(Max, hwcfg)
-+
-+ #ifdef __IS_HOST__
-+ #define default_param_host_channels -1 //(Max, hwcfg)
-+ #define default_param_rx_fifo_size 240
-+ #define default_param_nperio_tx_fifo_size 240
-+ #define default_param_perio_tx_fifo_size 32
-+ #endif //__IS_HOST__
-+ #ifdef __IS_DEVICE__
-+ #ifdef __DED_INTR__
-+ #define default_param_rx_fifo_size 256
-+ #define default_param_nperio_tx_fifo_size 248
-+ #define default_param_perio_tx_fifo_size_01 8
-+ #else
-+ #define default_param_rx_fifo_size 256
-+ #define default_param_nperio_tx_fifo_size 256
-+ #define default_param_perio_tx_fifo_size_01 0
-+ #endif
-+ #define default_param_perio_tx_fifo_size_02 0
-+ #define default_param_perio_tx_fifo_size_03 0
-+ #define default_param_perio_tx_fifo_size_04 0
-+ #define default_param_perio_tx_fifo_size_05 0
-+ #define default_param_perio_tx_fifo_size_06 0
-+ #define default_param_perio_tx_fifo_size_07 0
-+ #define default_param_perio_tx_fifo_size_08 0
-+ #define default_param_perio_tx_fifo_size_09 0
-+ #define default_param_perio_tx_fifo_size_10 0
-+ #define default_param_perio_tx_fifo_size_11 0
-+ #define default_param_perio_tx_fifo_size_12 0
-+ #define default_param_perio_tx_fifo_size_13 0
-+ #define default_param_perio_tx_fifo_size_14 0
-+ #define default_param_perio_tx_fifo_size_15 0
-+ #endif //__IS_DEVICE__
-+
-+ #elif defined(__IS_VR9__)
-+// #define IFXUSB1_IRQ 54
-+ #define IFXUSB1_IOMEM_BASE 0x1E101000
-+ #define IFXUSB1_FIFOMEM_BASE 0x1E120000
-+ #define IFXUSB1_FIFODBG_BASE 0x1E140000
-+
-+// #define IFXUSB2_IRQ 83
-+ #define IFXUSB2_IOMEM_BASE 0x1E106000
-+ #define IFXUSB2_FIFOMEM_BASE 0x1E1E0000
-+ #define IFXUSB2_FIFODBG_BASE 0x1E1C0000
-+// #define IFXUSB_OC_IRQ 60
-+
-+ #ifndef AMAZON_S_RCU_BASE_ADDR
-+ #define AMAZON_S_RCU_BASE_ADDR (0xBF203000)
-+ #endif
-+
-+ #ifndef AMAZON_S_CGU
-+ #define AMAZON_S_CGU (0xBF103000)
-+ #endif
-+ #ifndef AMAZON_S_CGU_IFCCR
-+ #define AMAZON_S_CGU_IFCCR ((volatile unsigned long *)(AMAZON_S_CGU+ 0x0018))
-+ #endif
-+
-+ #ifndef AMAZON_S_PMU
-+ #define AMAZON_S_PMU (KSEG1+0x1F102000)
-+ #endif
-+ #ifndef AMAZON_S_PMU_PWDCR
-+ #define AMAZON_S_PMU_PWDCR ((volatile unsigned long *)(AMAZON_S_PMU+0x001C))
-+ #endif
-+
-+ #ifndef AMAZON_S_GPIO_P0_OUT
-+ #define AMAZON_S_GPIO_P0_OUT (0xBF103000+0x10)
-+ #define AMAZON_S_GPIO_P0_DIR (0xBF103000+0x18)
-+ #define AMAZON_S_GPIO_P0_ALTSEL0 (0xBF103000+0x1C)
-+ #define AMAZON_S_GPIO_P0_ALTSEL1 (0xBF103000+0x20)
-+ #define AMAZON_S_GPIO_P0_OD (0xBF103000+0x24)
-+ #define AMAZON_S_GPIO_P0_PUDSEL (0xBF103000+0x2C)
-+ #define AMAZON_S_GPIO_P0_PUDEN (0xBF103000+0x30)
-+ #define AMAZON_S_GPIO_P1_OUT (0xBF103000+0x40)
-+ #define AMAZON_S_GPIO_P1_DIR (0xBF103000+0x48)
-+ #define AMAZON_S_GPIO_P1_ALTSEL0 (0xBF103000+0x4C)
-+ #define AMAZON_S_GPIO_P1_ALTSEL1 (0xBF103000+0x50)
-+ #define AMAZON_S_GPIO_P1_OD (0xBF103000+0x54)
-+ #define AMAZON_S_GPIO_P1_PUDSEL (0xBF103000+0x5C)
-+ #define AMAZON_S_GPIO_P1_PUDEN (0xBF103000+0x60)
-+ #endif
-+
-+ #define AMAZON_S_RCU_USB1CFG ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x18))
-+ #define AMAZON_S_RCU_USB2CFG ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x34))
-+ #define AMAZON_S_RCU_USBRESET ((volatile unsigned long *)(AMAZON_S_RCU_BASE_ADDR + 0x10))
-+ #define AMAZON_S_USBCFG_ARB 7 //
-+ #define AMAZON_S_USBCFG_HDSEL_BIT 11 // 0:host, 1:device
-+ #define AMAZON_S_USBCFG_HOST_END_BIT 10 // 0:little_end, 1:big_end
-+ #define AMAZON_S_USBCFG_SLV_END_BIT 17 // 0:little_end, 1:big_end
-+
-+ #define default_param_dma_burst_size 4 //(ALL)
-+
-+ #define default_param_speed IFXUSB_PARAM_SPEED_HIGH
-+
-+ #define default_param_max_transfer_size -1 //(Max, hwcfg)
-+ #define default_param_max_packet_count -1 //(Max, hwcfg)
-+ #define default_param_phy_utmi_width 16
-+
-+ #define default_param_turn_around_time_hs 6 //(NoChange) snpsid >= 0x4f54260a
-+ #define default_param_turn_around_time_fs 6 //(NoChange) snpsid >= 0x4f54260a
-+ #define default_param_timeout_cal_hs -1 //(NoChange)
-+ #define default_param_timeout_cal_fs -1 //(NoChange)
-+
-+ #define default_param_data_fifo_size -1 //(Max, hwcfg)
-+
-+ #ifdef __IS_HOST__
-+ #define default_param_host_channels -1 //(Max, hwcfg)
-+ #define default_param_rx_fifo_size 240
-+ #define default_param_nperio_tx_fifo_size 240
-+ #define default_param_perio_tx_fifo_size 32
-+ #endif //__IS_HOST__
-+ #ifdef __IS_DEVICE__
-+ #define default_param_rx_fifo_size 256
-+ #define default_param_tx_fifo_size_00 -1
-+ #define default_param_tx_fifo_size_01 -1
-+ #define default_param_tx_fifo_size_02 -1
-+ #define default_param_tx_fifo_size_03 -1
-+ #define default_param_tx_fifo_size_04 -1
-+ #define default_param_tx_fifo_size_05 -1
-+ #define default_param_tx_fifo_size_06 -1
-+ #define default_param_tx_fifo_size_07 -1
-+ #define default_param_tx_fifo_size_08 -1
-+ #define default_param_tx_fifo_size_09 -1
-+ #define default_param_tx_fifo_size_10 -1
-+ #define default_param_tx_fifo_size_11 -1
-+ #define default_param_tx_fifo_size_12 -1
-+ #define default_param_tx_fifo_size_13 -1
-+ #define default_param_tx_fifo_size_14 -1
-+ #define default_param_tx_fifo_size_15 -1
-+ #define default_param_dma_unalgned_tx -1
-+ #define default_param_dma_unalgned_rx -1
-+ #define default_param_thr_ctl -1
-+ #define default_param_tx_thr_length -1
-+ #define default_param_rx_thr_length -1
-+ #endif //__IS_DEVICE__
-+ #else // __IS_VR9__
-+ #error "Please choose one platform!!"
-+ #endif // __IS_VR9__
-+#endif //UEIP
-+
-+/*@}*//*IFXUSB_PLATEFORM_MEM_ADDR*/
-+
-+/////////////////////////////////////////////////////////////////////////
-+
-+#ifdef __IS_HOST__
-+ #ifdef CONFIG_USB_HOST_IFX_FORCE_USB11
-+ #undef default_param_speed
-+ #define default_param_speed IFXUSB_PARAM_SPEED_FULL
-+ #endif
-+#endif
-+#ifdef __IS_DEVICE__
-+ #ifndef CONFIG_USB_GADGET_DUALSPEED
-+ #undef default_param_speed
-+ #define default_param_speed IFXUSB_PARAM_SPEED_FULL
-+ #endif
-+#endif
-+
-+/////////////////////////////////////////////////////////////////////////
-+
-+static __inline__ void UDELAY( const uint32_t _usecs )
-+{
-+ udelay( _usecs );
-+}
-+
-+static __inline__ void MDELAY( const uint32_t _msecs )
-+{
-+ mdelay( _msecs );
-+}
-+
-+static __inline__ void SPIN_LOCK( spinlock_t *_lock )
-+{
-+ spin_lock(_lock);
-+}
-+
-+static __inline__ void SPIN_UNLOCK( spinlock_t *_lock )
-+{
-+ spin_unlock(_lock);
-+}
-+
-+#define SPIN_LOCK_IRQSAVE( _l, _f ) \
-+ { \
-+ spin_lock_irqsave(_l,_f); \
-+ }
-+
-+#define SPIN_UNLOCK_IRQRESTORE( _l,_f ) \
-+ { \
-+ spin_unlock_irqrestore(_l,_f); \
-+ }
-+
-+/////////////////////////////////////////////////////////////////////////
-+/*!
-+ \addtogroup IFXUSB_DBG_ROUTINE
-+ */
-+/*@{*/
-+#ifdef __IS_HOST__
-+ extern uint32_t h_dbg_lvl;
-+#endif
-+
-+#ifdef __IS_DEVICE__
-+ extern uint32_t d_dbg_lvl;
-+#endif
-+
-+/*! \brief When debug level has the DBG_CIL bit set, display CIL Debug messages. */
-+#define DBG_CIL (0x2)
-+/*! \brief When debug level has the DBG_CILV bit set, display CIL Verbose debug messages */
-+#define DBG_CILV (0x20)
-+/*! \brief When debug level has the DBG_PCD bit set, display PCD (Device) debug messages */
-+#define DBG_PCD (0x4)
-+/*! \brief When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug messages */
-+#define DBG_PCDV (0x40)
-+/*! \brief When debug level has the DBG_HCD bit set, display Host debug messages */
-+#define DBG_HCD (0x8)
-+/*! \brief When debug level has the DBG_HCDV bit set, display Verbose Host debug messages */
-+#define DBG_HCDV (0x80)
-+/*! \brief When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host mode. */
-+#define DBG_HCD_URB (0x800)
-+/*! \brief When debug level has any bit set, display debug messages */
-+#define DBG_ANY (0xFF)
-+/*! \brief All debug messages off */
-+#define DBG_OFF 0
-+
-+#define DBG_ENTRY (0x8000)
-+
-+#define IFXUSB "IFXUSB: "
-+
-+/*!
-+ \fn inline uint32_t SET_DEBUG_LEVEL( const uint32_t _new )
-+ \brief Set the Debug Level variable.
-+ \param _new 32-bit mask of debug level.
-+ \return previous debug level
-+ */
-+static inline uint32_t SET_DEBUG_LEVEL( const uint32_t _new )
-+{
-+ #ifdef __IS_HOST__
-+ uint32_t old = h_dbg_lvl;
-+ h_dbg_lvl = _new;
-+ #endif
-+
-+ #ifdef __IS_DEVICE__
-+ uint32_t old = d_dbg_lvl;
-+ d_dbg_lvl = _new;
-+ #endif
-+ return old;
-+}
-+
-+#ifdef __DEBUG__
-+ #ifdef __IS_HOST__
-+ # define IFX_DEBUGPL(lvl, x...) do{ if ((lvl)&h_dbg_lvl)printk( KERN_DEBUG IFXUSB x ); }while(0)
-+ # define CHK_DEBUG_LEVEL(level) ((level) & h_dbg_lvl)
-+ #endif
-+
-+ #ifdef __IS_DEVICE__
-+ # define IFX_DEBUGPL(lvl, x...) do{ if ((lvl)&d_dbg_lvl)printk( KERN_DEBUG IFXUSB x ); }while(0)
-+ # define CHK_DEBUG_LEVEL(level) ((level) & d_dbg_lvl)
-+ #endif
-+
-+ # define IFX_DEBUGP(x...) IFX_DEBUGPL(DBG_ANY, x )
-+#else
-+ # define IFX_DEBUGPL(lvl, x...) do{}while(0)
-+ # define IFX_DEBUGP(x...)
-+ # define CHK_DEBUG_LEVEL(level) (0)
-+#endif //__DEBUG__
-+
-+/* Print an Error message. */
-+#define IFX_ERROR(x...) printk( KERN_ERR IFXUSB x )
-+/* Print a Warning message. */
-+#define IFX_WARN(x...) printk( KERN_WARNING IFXUSB x )
-+/* Print a notice (normal but significant message). */
-+#define IFX_NOTICE(x...) printk( KERN_NOTICE IFXUSB x )
-+/* Basic message printing. */
-+#define IFX_PRINT(x...) printk( KERN_INFO IFXUSB x )
-+
-+/*@}*//*IFXUSB_DBG_ROUTINE*/
-+
-+
-+#endif //__IFXUSB_PLAT_H__
-+
---- /dev/null
-+++ b/drivers/usb/ifxhcd/ifxusb_regs.h
-@@ -0,0 +1,1420 @@
-+/*****************************************************************************
-+ ** FILE NAME : ifxusb_regs.h
-+ ** PROJECT : IFX USB sub-system V3
-+ ** MODULES : IFX USB sub-system Host and Device driver
-+ ** SRC VERSION : 1.0
-+ ** DATE : 1/Jan/2009
-+ ** AUTHOR : Chen, Howard
-+ ** DESCRIPTION : This file contains the data structures for accessing the IFXUSB core
-+ ** registers.
-+ ** The application interfaces with the USB core by reading from and
-+ ** writing to the Control and Status Register (CSR) space through the
-+ ** AHB Slave interface. These registers are 32 bits wide, and the
-+ ** addresses are 32-bit-block aligned.
-+ ** CSRs are classified as follows:
-+ ** - Core Global Registers
-+ ** - Device Mode Registers
-+ ** - Device Global Registers
-+ ** - Device Endpoint Specific Registers
-+ ** - Host Mode Registers
-+ ** - Host Global Registers
-+ ** - Host Port CSRs
-+ ** - Host Channel Specific Registers
-+ **
-+ ** Only the Core Global registers can be accessed in both Device and
-+ ** Host modes. When the USB core is operating in one mode, either
-+ ** Device or Host, the application must not access registers from the
-+ ** other mode. When the core switches from one mode to another, the
-+ ** registers in the new mode of operation must be reprogrammed as they
-+ ** would be after a power-on reset.
-+ ** FUNCTIONS :
-+ ** COMPILER : gcc
-+ ** REFERENCE : Synopsys DWC-OTG Driver 2.7
-+ ** COPYRIGHT :
-+ ** Version Control Section **
-+ ** $Author$
-+ ** $Date$
-+ ** $Revisions$
-+ ** $Log$ Revision history
-+*****************************************************************************/
-+
-+
-+
-+/*!
-+ \defgroup IFXUSB_CSR_DEFINITION Control and Status Register bit-map definition
-+ \ingroup IFXUSB_DRIVER_V3
-+ \brief Data structures for accessing the IFXUSB core registers.
-+ The application interfaces with the USB core by reading from and
-+ writing to the Control and Status Register (CSR) space through the
-+ AHB Slave interface. These registers are 32 bits wide, and the
-+ addresses are 32-bit-block aligned.
-+ CSRs are classified as follows:
-+ - Core Global Registers
-+ - Device Mode Registers
-+ - Device Global Registers
-+ - Device Endpoint Specific Registers
-+ - Host Mode Registers
-+ - Host Global Registers
-+ - Host Port CSRs
-+ - Host Channel Specific Registers
-+
-+ Only the Core Global registers can be accessed in both Device andHost modes.
-+ When the USB core is operating in one mode, either Device or Host, the
-+ application must not access registers from the other mode. When the core
-+ switches from one mode to another, the registers in the new mode of operation
-+ must be reprogrammed as they would be after a power-on reset.
-+ */
-+
-+/*!
-+ \defgroup IFXUSB_CSR_DEVICE_GLOBAL_REG Device Mode Registers
-+ \ingroup IFXUSB_CSR_DEFINITION
-+ \brief Bit-mapped structure to access Device Mode Global Registers
-+ */
-+
-+/*!
-+ \defgroup IFXUSB_CSR_DEVICE_EP_REG Device Mode EP Registers
-+ \ingroup IFXUSB_CSR_DEFINITION
-+ \brief Bit-mapped structure to access Device Mode EP Registers
-+ There will be one set of endpoint registers per logical endpoint
-+ implemented.
-+ These registers are visible only in Device mode and must not be
-+ accessed in Host mode, as the results are unknown.
-+ */
-+
-+/*!
-+ \defgroup IFXUSB_CSR_DEVICE_DMA_DESC Device mode scatter dma descriptor strusture
-+ \ingroup IFXUSB_CSR_DEFINITION
-+ \brief Bit-mapped structure to DMA descriptor
-+ */
-+
-+
-+/*!
-+ \defgroup IFXUSB_CSR_HOST_GLOBAL_REG Host Mode Registers
-+ \ingroup IFXUSB_CSR_DEFINITION
-+ \brief Bit-mapped structure to access Host Mode Global Registers
-+ */
-+
-+/*!
-+ \defgroup IFXUSB_CSR_HOST_HC_REG Host Mode HC Registers
-+ \ingroup IFXUSB_CSR_DEFINITION
-+ \brief Bit-mapped structure to access Host Mode Host Channel Registers
-+ There will be one set of endpoint registers per host channel
-+ implemented.
-+ These registers are visible only in Host mode and must not be
-+ accessed in Device mode, as the results are unknown.
-+ */
-+
-+/*!
-+ \defgroup IFXUSB_CSR_PWR_CLK_GATING_REG Power and Clock Gating Control Register
-+ \ingroup IFXUSB_CSR_DEFINITION
-+ \brief Bit-mapped structure to Power and Clock Gating Control Register
-+ */
-+
-+
-+
-+
-+
-+
-+
-+
-+/*!
-+ \defgroup IFXUSB_CSR_CORE_GLOBAL_REG Core Global Registers
-+ \ingroup IFXUSB_CSR_DEFINITION
-+ \brief Bit-mapped structure to access Core Global Registers
-+ */
-+/*!
-+ \defgroup IFXUSB_CSR_CORE_GLOBAL_REG Core Global Registers
-+ \ingroup IFXUSB_CSR_DEFINITION
-+ \brief Bit-mapped structure to access Core Global Registers
-+ */
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+/*!
-+ \file ifxusb_regs.h
-+ \ingroup IFXUSB_DRIVER_V3
-+ \brief This file contains the data structures for accessing the IFXUSB core registers.
-+ */
-+
-+
-+#ifndef __IFXUSB_REGS_H__
-+#define __IFXUSB_REGS_H__
-+
-+/****************************************************************************/
-+
-+#define MAX_PERIO_FIFOS 15 /** Maximum number of Periodic FIFOs */
-+#define MAX_TX_FIFOS 15 /** Maximum number of Periodic FIFOs */
-+#define MAX_EPS_CHANNELS 16 /** Maximum number of Endpoints/HostChannels */
-+
-+/****************************************************************************/
-+
-+/*!
-+ \addtogroup IFXUSB_CSR_ACCESS_MACROS
-+ */
-+/*@{*/
-+
-+//#define RecordRegRW
-+
-+/*!
-+ \fn static __inline__ uint32_t ifxusb_rreg( volatile uint32_t *_reg)
-+ \brief Reads the content of a register.
-+ \param _reg address of register to read.
-+ \return contents of the register.
-+ */
-+static __inline__ uint32_t ifxusb_rreg( volatile uint32_t *_reg)
-+{
-+ #ifdef RecordRegRW
-+ uint32_t r;
-+ r=*(_reg);
-+ return (r);
-+ #else
-+ return (*(_reg));
-+ #endif
-+};
-+
-+
-+/*!
-+ \fn static __inline__ void ifxusb_wreg( volatile uint32_t *_reg, const uint32_t _value)
-+ \brief Writes a register with a 32 bit value.
-+ \param _reg address of register to write.
-+ \param _value value to write to _reg.
-+ */
-+static __inline__ void ifxusb_wreg( volatile uint32_t *_reg, const uint32_t _value)
-+{
-+ #ifdef RecordRegRW
-+ printk(KERN_INFO "[W %p<-%08X]\n",_reg,_value);
-+ #else
-+ *(_reg)=_value;
-+ #endif
-+};
-+
-+/*!
-+ \fn static __inline__ void ifxusb_mreg( volatile uint32_t *_reg, const uint32_t _clear_mask, const uint32_t _set_mask)
-+ \brief Modifies bit values in a register. Using the
-+ algorithm: (reg_contents & ~clear_mask) | set_mask.
-+ \param _reg address of register to modify.
-+ \param _clear_mask bit mask to be cleared.
-+ \param _set_mask bit mask to be set.
-+ */
-+static __inline__ void ifxusb_mreg( volatile uint32_t *_reg, const uint32_t _clear_mask, const uint32_t _set_mask)
-+{
-+ uint32_t v;
-+ #ifdef RecordRegRW
-+ uint32_t r;
-+ v= *(_reg);
-+ r=v;
-+ r&=(~_clear_mask);
-+ r|= _set_mask;
-+ *(_reg)=r ;
-+ printk(KERN_INFO "[M %p->%08X+%08X/%08X<-%08X]\n",_reg,r,_clear_mask,_set_mask,r);
-+ #else
-+ v= *(_reg);
-+ v&=(~_clear_mask);
-+ v|= _set_mask;
-+ *(_reg)=v ;
-+ #endif
-+};
-+
-+/*@}*//*IFXUSB_CSR_ACCESS_MACROS*/
-+/****************************************************************************/
-+
-+/*!
-+ \addtogroup IFXUSB_CSR_CORE_GLOBAL_REG
-+ */
-+/*@{*/
-+
-+/*!
-+ \struct ifxusb_core_global_regs
-+ \brief IFXUSB Core registers .
-+ The ifxusb_core_global_regs structure defines the size
-+ and relative field offsets for the Core Global registers.
-+ */
-+typedef struct ifxusb_core_global_regs
-+{
-+ volatile uint32_t gotgctl; /*!< 000h OTG Control and Status Register. */
-+ volatile uint32_t gotgint; /*!< 004h OTG Interrupt Register. */
-+ volatile uint32_t gahbcfg; /*!< 008h Core AHB Configuration Register. */
-+ volatile uint32_t gusbcfg; /*!< 00Ch Core USB Configuration Register. */
-+ volatile uint32_t grstctl; /*!< 010h Core Reset Register. */
-+ volatile uint32_t gintsts; /*!< 014h Core Interrupt Register. */
-+ volatile uint32_t gintmsk; /*!< 018h Core Interrupt Mask Register. */
-+ volatile uint32_t grxstsr; /*!< 01Ch Receive Status Queue Read Register (Read Only). */
-+ volatile uint32_t grxstsp; /*!< 020h Receive Status Queue Read & POP Register (Read Only). */
-+ volatile uint32_t grxfsiz; /*!< 024h Receive FIFO Size Register. */
-+ volatile uint32_t gnptxfsiz; /*!< 028h Non Periodic Transmit FIFO Size Register. */
-+ volatile uint32_t gnptxsts; /*!< 02Ch Non Periodic Transmit FIFO/Queue Status Register (Read Only). */
-+ volatile uint32_t gi2cctl; /*!< 030h I2C Access Register. */
-+ volatile uint32_t gpvndctl; /*!< 034h PHY Vendor Control Register. */
-+ volatile uint32_t ggpio; /*!< 038h General Purpose Input/Output Register. */
-+ volatile uint32_t guid; /*!< 03Ch User ID Register. */
-+ volatile uint32_t gsnpsid; /*!< 040h Synopsys ID Register (Read Only). */
-+ volatile uint32_t ghwcfg1; /*!< 044h User HW Config1 Register (Read Only). */
-+ volatile uint32_t ghwcfg2; /*!< 048h User HW Config2 Register (Read Only). */
-+ volatile uint32_t ghwcfg3; /*!< 04Ch User HW Config3 Register (Read Only). */
-+ volatile uint32_t ghwcfg4; /*!< 050h User HW Config4 Register (Read Only). */
-+ volatile uint32_t reserved[43]; /*!< 054h Reserved 054h-0FFh */
-+ volatile uint32_t hptxfsiz; /*!< 100h Host Periodic Transmit FIFO Size Register. */
-+ volatile uint32_t dptxfsiz_dieptxf[15];/*!< 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15.
-+ Device Periodic Transmit FIFO#n Register if dedicated
-+ fifos are disabled, otherwise Device Transmit FIFO#n
-+ Register.
-+ */
-+} ifxusb_core_global_regs_t;
-+
-+/*!
-+ \brief Bits of the Core OTG Control and Status Register (GOTGCTL).
-+ */
-+typedef union gotgctl_data
-+{
-+ uint32_t d32;
-+ struct{
-+ unsigned reserved21_31 : 11;
-+ unsigned currmod : 1 ; /*!< 20 */
-+ unsigned bsesvld : 1 ; /*!< 19 */
-+ unsigned asesvld : 1 ; /*!< 18 */
-+ unsigned reserved17 : 1 ;
-+ unsigned conidsts : 1 ; /*!< 16 */
-+ unsigned reserved12_15 : 4 ;
-+ unsigned devhnpen : 1 ; /*!< 11 */
-+ unsigned hstsethnpen : 1 ; /*!< 10 */
-+ unsigned hnpreq : 1 ; /*!< 09 */
-+ unsigned hstnegscs : 1 ; /*!< 08 */
-+ unsigned reserved2_7 : 6 ;
-+ unsigned sesreq : 1 ; /*!< 01 */
-+ unsigned sesreqscs : 1 ; /*!< 00 */
-+ } b;
-+} gotgctl_data_t;
-+
-+/*!
-+ \brief Bit fields of the Core OTG Interrupt Register (GOTGINT).
-+ */
-+typedef union gotgint_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned reserved31_20 : 12;
-+ unsigned debdone : 1 ; /*!< 19 Debounce Done */
-+ unsigned adevtoutchng : 1 ; /*!< 18 A-Device Timeout Change */
-+ unsigned hstnegdet : 1 ; /*!< 17 Host Negotiation Detected */
-+ unsigned reserver10_16 : 7 ;
-+ unsigned hstnegsucstschng : 1 ; /*!< 09 Host Negotiation Success Status Change */
-+ unsigned sesreqsucstschng : 1 ; /*!< 08 Session Request Success Status Change */
-+ unsigned reserved3_7 : 5 ;
-+ unsigned sesenddet : 1 ; /*!< 02 Session End Detected */
-+ unsigned reserved0_1 : 2 ;
-+ } b;
-+} gotgint_data_t;
-+
-+/*!
-+ \brief Bit fields of the Core AHB Configuration Register (GAHBCFG).
-+ */
-+typedef union gahbcfg_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned reserved9_31 : 23;
-+ unsigned ptxfemplvl : 1 ; /*!< 08 Periodic FIFO empty level trigger condition*/
-+ unsigned nptxfemplvl : 1 ; /*!< 07 Non-Periodic FIFO empty level trigger condition*/
-+ #define IFXUSB_GAHBCFG_TXFEMPTYLVL_EMPTY 1
-+ #define IFXUSB_GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0
-+ unsigned reserved : 1 ;
-+ unsigned dmaenable : 1 ; /*!< 05 DMA enable*/
-+ #define IFXUSB_GAHBCFG_DMAENABLE 1
-+ unsigned hburstlen : 4 ; /*!< 01-04 DMA Burst-length*/
-+ #define IFXUSB_GAHBCFG_INT_DMA_BURST_SINGLE 0
-+ #define IFXUSB_GAHBCFG_INT_DMA_BURST_INCR 1
-+ #define IFXUSB_GAHBCFG_INT_DMA_BURST_INCR4 3
-+ #define IFXUSB_GAHBCFG_INT_DMA_BURST_INCR8 5
-+ #define IFXUSB_GAHBCFG_INT_DMA_BURST_INCR16 7
-+ unsigned glblintrmsk : 1 ; /*!< 00 USB Global Interrupt Enable */
-+ #define IFXUSB_GAHBCFG_GLBINT_ENABLE 1
-+ } b;
-+} gahbcfg_data_t;
-+
-+/*!
-+ \brief Bit fields of the Core USB Configuration Register (GUSBCFG).
-+*/
-+typedef union gusbcfg_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned reserved31 : 1;
-+ unsigned ForceDevMode : 1; /*!< 30 Force Device Mode */
-+ unsigned ForceHstMode : 1; /*!< 29 Force Host Mode */
-+ unsigned TxEndDelay : 1; /*!< 28 Tx End Delay */
-+ unsigned reserved2723 : 5;
-+ unsigned term_sel_dl_pulse : 1; /*!< 22 TermSel DLine Pulsing Selection */
-+ unsigned reserved2117 : 5;
-+ unsigned otgutmifssel : 1; /*!< 16 UTMIFS Select */
-+ unsigned phylpwrclksel : 1; /*!< 15 PHY Low-Power Clock Select */
-+ unsigned reserved14 : 1;
-+ unsigned usbtrdtim : 4; /*!< 13-10 USB Turnaround Time */
-+ unsigned hnpcap : 1; /*!< 09 HNP-Capable */
-+ unsigned srpcap : 1; /*!< 08 SRP-Capable */
-+ unsigned reserved07 : 1;
-+ unsigned physel : 1; /*!< 06 USB 2.0 High-Speed PHY or
-+ USB 1.1 Full-Speed Serial
-+ Transceiver Select */
-+ unsigned fsintf : 1; /*!< 05 Full-Speed Serial Interface Select */
-+ unsigned ulpi_utmi_sel : 1; /*!< 04 ULPI or UTMI+ Select */
-+ unsigned phyif : 1; /*!< 03 PHY Interface */
-+ unsigned toutcal : 3; /*!< 00-02 HS/FS Timeout Calibration */
-+ }b;
-+} gusbcfg_data_t;
-+
-+/*!
-+ \brief Bit fields of the Core Reset Register (GRSTCTL).
-+ */
-+typedef union grstctl_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned ahbidle : 1; /*!< 31 AHB Master Idle. Indicates the AHB Master State
-+ Machine is in IDLE condition. */
-+ unsigned dmareq : 1; /*!< 30 DMA Request Signal. Indicated DMA request is in
-+ probress. Used for debug purpose. */
-+ unsigned reserved11_29 :19;
-+ unsigned txfnum : 5; /*!< 10-06 TxFIFO Number (TxFNum) to be flushed.
-+ 0x00: Non Periodic TxFIFO Flush or TxFIFO 0
-+ 0x01-0x0F: Periodic TxFIFO Flush or TxFIFO n
-+ 0x10: Flush all TxFIFO
-+ */
-+ unsigned txfflsh : 1; /*!< 05 TxFIFO Flush */
-+ unsigned rxfflsh : 1; /*!< 04 RxFIFO Flush */
-+ unsigned intknqflsh : 1; /*!< 03 In Token Sequence Learning Queue Flush (Device Only) */
-+ unsigned hstfrm : 1; /*!< 02 Host Frame Counter Reset (Host Only) */
-+ unsigned hsftrst : 1; /*!< 01 Hclk Soft Reset */
-+
-+ unsigned csftrst : 1; /*!< 00 Core Soft Reset
-+ The application can flush the control logic in the
-+ entire core using this bit. This bit resets the
-+ pipelines in the AHB Clock domain as well as the
-+ PHY Clock domain.
-+ The state machines are reset to an IDLE state, the
-+ control bits in the CSRs are cleared, all the
-+ transmit FIFOs and the receive FIFO are flushed.
-+ The status mask bits that control the generation of
-+ the interrupt, are cleared, to clear the
-+ interrupt. The interrupt status bits are not
-+ cleared, so the application can get the status of
-+ any events that occurred in the core after it has
-+ set this bit.
-+ Any transactions on the AHB are terminated as soon
-+ as possible following the protocol. Any
-+ transactions on the USB are terminated immediately.
-+ The configuration settings in the CSRs are
-+ unchanged, so the software doesn't have to
-+ reprogram these registers (Device
-+ Configuration/Host Configuration/Core System
-+ Configuration/Core PHY Configuration).
-+ The application can write to this bit, any time it
-+ wants to reset the core. This is a self clearing
-+ bit and the core clears this bit after all the
-+ necessary logic is reset in the core, which may
-+ take several clocks, depending on the current state
-+ of the core.
-+ */
-+ }b;
-+} grstctl_t;
-+
-+/*!
-+ \brief Bit fields of the Core Interrupt Mask Register (GINTMSK) and
-+ Core Interrupt Register (GINTSTS).
-+ */
-+typedef union gint_data
-+{
-+ uint32_t d32;
-+ #define IFXUSB_SOF_INTR_MASK 0x0008
-+ struct
-+ {
-+ unsigned wkupintr : 1; /*!< 31 Resume/Remote Wakeup Detected Interrupt */
-+ unsigned sessreqintr : 1; /*!< 30 Session Request/New Session Detected Interrupt */
-+ unsigned disconnect : 1; /*!< 29 Disconnect Detected Interrupt */
-+ unsigned conidstschng : 1; /*!< 28 Connector ID Status Change */
-+ unsigned reserved27 : 1;
-+ unsigned ptxfempty : 1; /*!< 26 Periodic TxFIFO Empty */
-+ unsigned hcintr : 1; /*!< 25 Host Channels Interrupt */
-+ unsigned portintr : 1; /*!< 24 Host Port Interrupt */
-+ unsigned reserved23 : 1;
-+ unsigned fetsuspmsk : 1; /*!< 22 Data Fetch Suspended */
-+ unsigned incomplisoout : 1; /*!< 21 Incomplete IsochronousOUT/Period Transfer */
-+ unsigned incomplisoin : 1; /*!< 20 Incomplete Isochronous IN Transfer */
-+ unsigned outepintr : 1; /*!< 19 OUT Endpoints Interrupt */
-+ unsigned inepintr : 1; /*!< 18 IN Endpoints Interrupt */
-+ unsigned epmismatch : 1; /*!< 17 Endpoint Mismatch Interrupt */
-+ unsigned reserved16 : 1;
-+ unsigned eopframe : 1; /*!< 15 End of Periodic Frame Interrupt */
-+ unsigned isooutdrop : 1; /*!< 14 Isochronous OUT Packet Dropped Interrupt */
-+ unsigned enumdone : 1; /*!< 13 Enumeration Done */
-+ unsigned usbreset : 1; /*!< 12 USB Reset */
-+ unsigned usbsuspend : 1; /*!< 11 USB Suspend */
-+ unsigned erlysuspend : 1; /*!< 10 Early Suspend */
-+ unsigned i2cintr : 1; /*!< 09 I2C Interrupt */
-+ unsigned reserved8 : 1;
-+ unsigned goutnakeff : 1; /*!< 07 Global OUT NAK Effective */
-+ unsigned ginnakeff : 1; /*!< 06 Global Non-periodic IN NAK Effective */
-+ unsigned nptxfempty : 1; /*!< 05 Non-periodic TxFIFO Empty */
-+ unsigned rxstsqlvl : 1; /*!< 04 Receive FIFO Non-Empty */
-+ unsigned sofintr : 1; /*!< 03 Start of (u)Frame */
-+ unsigned otgintr : 1; /*!< 02 OTG Interrupt */
-+ unsigned modemismatch : 1; /*!< 01 Mode Mismatch Interrupt */
-+ unsigned reserved0 : 1;
-+ } b;
-+} gint_data_t;
-+
-+/*!
-+ \brief Bit fields in the Receive Status Read and Pop Registers (GRXSTSR, GRXSTSP)
-+ */
-+typedef union grxsts_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned reserved : 7;
-+ unsigned fn : 4; /*!< 24-21 Frame Number */
-+ unsigned pktsts : 4; /*!< 20-17 Packet Status */
-+ #define IFXUSB_DSTS_DATA_UPDT 0x2 // OUT Data Packet
-+ #define IFXUSB_DSTS_XFER_COMP 0x3 // OUT Data Transfer Complete
-+ #define IFXUSB_DSTS_GOUT_NAK 0x1 // Global OUT NAK
-+ #define IFXUSB_DSTS_SETUP_COMP 0x4 // Setup Phase Complete
-+ #define IFXUSB_DSTS_SETUP_UPDT 0x6 // SETUP Packet
-+ unsigned dpid : 2; /*!< 16-15 Data PID */
-+ unsigned bcnt :11; /*!< 14-04 Byte Count */
-+ unsigned epnum : 4; /*!< 03-00 Endpoint Number */
-+ } db;
-+ struct
-+ {
-+ unsigned reserved :11;
-+ unsigned pktsts : 4; /*!< 20-17 Packet Status */
-+ #define IFXUSB_HSTS_DATA_UPDT 0x2 // OUT Data Packet
-+ #define IFXUSB_HSTS_XFER_COMP 0x3 // OUT Data Transfer Complete
-+ #define IFXUSB_HSTS_DATA_TOGGLE_ERR 0x5 // DATA TOGGLE Error
-+ #define IFXUSB_HSTS_CH_HALTED 0x7 // Channel Halted
-+ unsigned dpid : 2; /*!< 16-15 Data PID */
-+ unsigned bcnt :11; /*!< 14-04 Byte Count */
-+ unsigned chnum : 4; /*!< 03-00 Channel Number */
-+ } hb;
-+} grxsts_data_t;
-+
-+/*!
-+ \brief Bit fields in the FIFO Size Registers (HPTXFSIZ, GNPTXFSIZ, DPTXFSIZn).
-+ */
-+typedef union fifosize_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned depth : 16; /*!< 31-16 TxFIFO Depth (in DWord)*/
-+ unsigned startaddr : 16; /*!< 15-00 RAM Starting address */
-+ } b;
-+} fifosize_data_t;
-+
-+/*!
-+ \brief Bit fields in the Non-Periodic Transmit FIFO/Queue Status Register (GNPTXSTS).
-+ */
-+
-+typedef union gnptxsts_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned reserved : 1;
-+ unsigned nptxqtop_chnep : 4; /*!< 30-27 Channel/EP Number of top of the Non-Periodic
-+ Transmit Request Queue
-+ */
-+ unsigned nptxqtop_token : 2; /*!< 26-25 Token Type top of the Non-Periodic
-+ Transmit Request Queue
-+ 0 - IN/OUT
-+ 1 - Zero Length OUT
-+ 2 - PING/Complete Split
-+ 3 - Channel Halt
-+ */
-+ unsigned nptxqtop_terminate : 1; /*!< 24 Terminate (Last entry for the selected
-+ channel/EP)*/
-+ unsigned nptxqspcavail : 8; /*!< 23-16 Transmit Request Queue Space Available */
-+ unsigned nptxfspcavail :16; /*!< 15-00 TxFIFO Space Avail (in DWord)*/
-+ }b;
-+} gnptxsts_data_t;
-+
-+
-+/*!
-+ \brief Bit fields in the Transmit FIFO Status Register (DTXFSTS).
-+ */
-+typedef union dtxfsts_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned reserved : 16;
-+ unsigned txfspcavail : 16; /*!< 15-00 TxFIFO Space Avail (in DWord)*/
-+ }b;
-+} dtxfsts_data_t;
-+
-+
-+/*!
-+ \brief Bit fields in the I2C Control Register (I2CCTL).
-+ */
-+typedef union gi2cctl_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned bsydne : 1; /*!< 31 I2C Busy/Done*/
-+ unsigned rw : 1; /*!< 30 Read/Write Indicator */
-+ unsigned reserved : 2;
-+ unsigned i2cdevaddr : 2; /*!< 27-26 I2C Device Address */
-+ unsigned i2csuspctl : 1; /*!< 25 I2C Suspend Control */
-+ unsigned ack : 1; /*!< 24 I2C ACK */
-+ unsigned i2cen : 1; /*!< 23 I2C Enable */
-+ unsigned addr : 7; /*!< 22-16 I2C Address */
-+ unsigned regaddr : 8; /*!< 15-08 I2C Register Addr */
-+ unsigned rwdata : 8; /*!< I2C Read/Write Data */
-+ } b;
-+} gi2cctl_data_t;
-+
-+
-+/*!
-+ \brief Bit fields in the User HW Config1 Register.
-+ */
-+typedef union hwcfg1_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned ep_dir15 : 2; /*!< Direction of each EP
-+ 0: BIDIR (IN and OUT) endpoint
-+ 1: IN endpoint
-+ 2: OUT endpoint
-+ 3: Reserved
-+ */
-+ unsigned ep_dir14 : 2;
-+ unsigned ep_dir13 : 2;
-+ unsigned ep_dir12 : 2;
-+ unsigned ep_dir11 : 2;
-+ unsigned ep_dir10 : 2;
-+ unsigned ep_dir09 : 2;
-+ unsigned ep_dir08 : 2;
-+ unsigned ep_dir07 : 2;
-+ unsigned ep_dir06 : 2;
-+ unsigned ep_dir05 : 2;
-+ unsigned ep_dir04 : 2;
-+ unsigned ep_dir03 : 2;
-+ unsigned ep_dir02 : 2;
-+ unsigned ep_dir01 : 2;
-+ unsigned ep_dir00 : 2;
-+ }b;
-+} hwcfg1_data_t;
-+
-+/*!
-+ \brief Bit fields in the User HW Config2 Register.
-+ */
-+typedef union hwcfg2_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned reserved31 : 1;
-+ unsigned dev_token_q_depth : 5; /*!< 30-26 Device Mode IN Token Sequence Learning Queue Depth */
-+ unsigned host_perio_tx_q_depth : 2; /*!< 25-24 Host Mode Periodic Request Queue Depth */
-+ unsigned nonperio_tx_q_depth : 2; /*!< 23-22 Non-periodic Request Queue Depth */
-+ unsigned rx_status_q_depth : 2; /*!< 21-20 Multi Processor Interrupt Enabled */
-+ unsigned dynamic_fifo : 1; /*!< 19 Dynamic FIFO Sizing Enabled */
-+ unsigned perio_ep_supported : 1; /*!< 18 Periodic OUT Channels Supported in Host Mode */
-+ unsigned num_host_chan : 4; /*!< 17-14 Number of Host Channels */
-+ unsigned num_dev_ep : 4; /*!< 13-10 Number of Device Endpoints */
-+ unsigned fs_phy_type : 2; /*!< 09-08 Full-Speed PHY Interface Type */
-+ #define IFXUSB_HWCFG2_FS_PHY_TYPE_NOT_SUPPORTED 0
-+ #define IFXUSB_HWCFG2_FS_PHY_TYPE_DEDICATE 1
-+ #define IFXUSB_HWCFG2_FS_PHY_TYPE_UTMI 2
-+ #define IFXUSB_HWCFG2_FS_PHY_TYPE_ULPI 3
-+ unsigned hs_phy_type : 2; /*!< 07-06 High-Speed PHY Interface Type */
-+ #define IFXUSB_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0
-+ #define IFXUSB_HWCFG2_HS_PHY_TYPE_UTMI 1
-+ #define IFXUSB_HWCFG2_HS_PHY_TYPE_ULPI 2
-+ #define IFXUSB_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3
-+ unsigned point2point : 1; /*!< 05 Point-to-Point */
-+ unsigned architecture : 2; /*!< 04-03 Architecture */
-+ #define IFXUSB_HWCFG2_ARCH_SLAVE_ONLY 0
-+ #define IFXUSB_HWCFG2_ARCH_EXT_DMA 1
-+ #define IFXUSB_HWCFG2_ARCH_INT_DMA 2
-+ unsigned op_mode : 3; /*!< 02-00 Mode of Operation */
-+ #define IFXUSB_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0
-+ #define IFXUSB_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1
-+ #define IFXUSB_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2
-+ #define IFXUSB_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3
-+ #define IFXUSB_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4
-+ #define IFXUSB_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5
-+ #define IFXUSB_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6
-+ } b;
-+} hwcfg2_data_t;
-+
-+/*!
-+ \brief Bit fields in the User HW Config3 Register.
-+ */
-+typedef union hwcfg3_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned dfifo_depth :16; /*!< 31-16 DFIFO Depth */
-+ unsigned reserved15_12 : 4;
-+ unsigned synch_reset_type : 1; /*!< 11 Reset Style for Clocked always Blocks in RTL */
-+ unsigned optional_features : 1; /*!< 10 Optional Features Removed */
-+ unsigned vendor_ctrl_if : 1; /*!< 09 Vendor Control Interface Support */
-+ unsigned i2c : 1; /*!< 08 I2C Selection */
-+ unsigned otg_func : 1; /*!< 07 OTG Function Enabled */
-+ unsigned packet_size_cntr_width : 3; /*!< 06-04 Width of Packet Size Counters */
-+ unsigned xfer_size_cntr_width : 4; /*!< 03-00 Width of Transfer Size Counters */
-+ } b;
-+} hwcfg3_data_t;
-+
-+/*!
-+ \brief Bit fields in the User HW Config4
-+ * Register. Read the register into the <i>d32</i> element then read
-+ * out the bits using the <i>b</i>it elements.
-+ */
-+typedef union hwcfg4_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned desc_dma_dyn : 1; /*!< 31 Scatter/Gather DMA */
-+ unsigned desc_dma : 1; /*!< 30 Scatter/Gather DMA configuration */
-+ unsigned num_in_eps : 4; /*!< 29-26 Number of Device Mode IN Endpoints Including Control Endpoints */
-+ unsigned ded_fifo_en : 1; /*!< 25 Enable Dedicated Transmit FIFO for device IN Endpoints */
-+ unsigned session_end_filt_en : 1; /*!< 24 session_end Filter Enabled */
-+ unsigned b_valid_filt_en : 1; /*!< 23 b_valid Filter Enabled */
-+ unsigned a_valid_filt_en : 1; /*!< 22 a_valid Filter Enabled */
-+ unsigned vbus_valid_filt_en : 1; /*!< 21 vbus_valid Filter Enabled */
-+ unsigned iddig_filt_en : 1; /*!< 20 iddig Filter Enable */
-+ unsigned num_dev_mode_ctrl_ep : 4; /*!< 19-16 Number of Device Mode Control Endpoints in Addition to Endpoint 0 */
-+ unsigned utmi_phy_data_width : 2; /*!< 15-14 UTMI+ PHY/ULPI-to-Internal UTMI+ Wrapper Data Width */
-+ unsigned reserved13_06 : 8;
-+ unsigned min_ahb_freq : 1; /*!< 05 Minimum AHB Frequency Less Than 60 MHz */
-+ unsigned power_optimiz : 1; /*!< 04 Enable Power Optimization? */
-+ unsigned num_dev_perio_in_ep : 4; /*!< 03-00 Number of Device Mode Periodic IN Endpoints */
-+ } b;
-+} hwcfg4_data_t;
-+
-+/*@}*//*IFXUSB_CSR_CORE_GLOBAL_REG*/
-+
-+/****************************************************************************/
-+/*!
-+ \addtogroup IFXUSB_CSR_DEVICE_GLOBAL_REG
-+ */
-+/*@{*/
-+
-+/*!
-+ \struct ifxusb_dev_global_regs
-+ \brief IFXUSB Device Mode Global registers. Offsets 800h-BFFh
-+ The ifxusb_dev_global_regs structure defines the size
-+ and relative field offsets for the Device Global registers.
-+ These registers are visible only in Device mode and must not be
-+ accessed in Host mode, as the results are unknown.
-+ */
-+typedef struct ifxusb_dev_global_regs
-+{
-+ volatile uint32_t dcfg; /*!< 800h Device Configuration Register. */
-+ volatile uint32_t dctl; /*!< 804h Device Control Register. */
-+ volatile uint32_t dsts; /*!< 808h Device Status Register (Read Only). */
-+ uint32_t unused;
-+ volatile uint32_t diepmsk; /*!< 810h Device IN Endpoint Common Interrupt Mask Register. */
-+ volatile uint32_t doepmsk; /*!< 814h Device OUT Endpoint Common Interrupt Mask Register. */
-+ volatile uint32_t daint; /*!< 818h Device All Endpoints Interrupt Register. */
-+ volatile uint32_t daintmsk; /*!< 81Ch Device All Endpoints Interrupt Mask Register. */
-+ volatile uint32_t dtknqr1; /*!< 820h Device IN Token Queue Read Register-1 (Read Only). */
-+ volatile uint32_t dtknqr2; /*!< 824h Device IN Token Queue Read Register-2 (Read Only). */
-+ volatile uint32_t dvbusdis; /*!< 828h Device VBUS discharge Register.*/
-+ volatile uint32_t dvbuspulse; /*!< 82Ch Device VBUS Pulse Register. */
-+ volatile uint32_t dtknqr3_dthrctl; /*!< 830h Device IN Token Queue Read Register-3 (Read Only).
-+ Device Thresholding control register (Read/Write)
-+ */
-+ volatile uint32_t dtknqr4_fifoemptymsk; /*!< 834h Device IN Token Queue Read Register-4 (Read Only).
-+ Device IN EPs empty Inr. Mask Register (Read/Write)
-+ */
-+} ifxusb_device_global_regs_t;
-+
-+/*!
-+ \brief Bit fields in the Device Configuration Register.
-+ */
-+
-+typedef union dcfg_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned reserved31_26 : 6;
-+ unsigned perschintvl : 2; /*!< 25-24 Periodic Scheduling Interval */
-+ unsigned descdma : 1; /*!< 23 Enable Descriptor DMA in Device mode */
-+ unsigned epmscnt : 5; /*!< 22-18 In Endpoint Mis-match count */
-+ unsigned reserved13_17 : 5;
-+ unsigned perfrint : 2; /*!< 12-11 Periodic Frame Interval */
-+ #define IFXUSB_DCFG_FRAME_INTERVAL_80 0
-+ #define IFXUSB_DCFG_FRAME_INTERVAL_85 1
-+ #define IFXUSB_DCFG_FRAME_INTERVAL_90 2
-+ #define IFXUSB_DCFG_FRAME_INTERVAL_95 3
-+ unsigned devaddr : 7; /*!< 10-04 Device Addresses */
-+ unsigned reserved3 : 1;
-+ unsigned nzstsouthshk : 1; /*!< 02 Non Zero Length Status OUT Handshake */
-+ #define IFXUSB_DCFG_SEND_STALL 1
-+ unsigned devspd : 2; /*!< 01-00 Device Speed */
-+ } b;
-+} dcfg_data_t;
-+
-+/*!
-+ \brief Bit fields in the Device Control Register.
-+ */
-+typedef union dctl_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned reserved16_31 :16;
-+ unsigned ifrmnum : 1; /*!< 15 Ignore Frame Number for ISOC EPs */
-+ unsigned gmc : 2; /*!< 14-13 Global Multi Count */
-+ unsigned gcontbna : 1; /*!< 12 Global Continue on BNA */
-+ unsigned pwronprgdone : 1; /*!< 11 Power-On Programming Done */
-+ unsigned cgoutnak : 1; /*!< 10 Clear Global OUT NAK */
-+ unsigned sgoutnak : 1; /*!< 09 Set Global OUT NAK */
-+ unsigned cgnpinnak : 1; /*!< 08 Clear Global Non-Periodic IN NAK */
-+ unsigned sgnpinnak : 1; /*!< 07 Set Global Non-Periodic IN NAK */
-+ unsigned tstctl : 3; /*!< 06-04 Test Control */
-+ unsigned goutnaksts : 1; /*!< 03 Global OUT NAK Status */
-+ unsigned gnpinnaksts : 1; /*!< 02 Global Non-Periodic IN NAK Status */
-+ unsigned sftdiscon : 1; /*!< 01 Soft Disconnect */
-+ unsigned rmtwkupsig : 1; /*!< 00 Remote Wakeup */
-+ } b;
-+} dctl_data_t;
-+
-+
-+/*!
-+ \brief Bit fields in the Device Status Register.
-+ */
-+typedef union dsts_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned reserved22_31 :10;
-+ unsigned soffn :14; /*!< 21-08 Frame or Microframe Number of the received SOF */
-+ unsigned reserved4_7 : 4;
-+ unsigned errticerr : 1; /*!< 03 Erratic Error */
-+ unsigned enumspd : 2; /*!< 02-01 Enumerated Speed */
-+ #define IFXUSB_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0
-+ #define IFXUSB_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1
-+ #define IFXUSB_DSTS_ENUMSPD_LS_PHY_6MHZ 2
-+ #define IFXUSB_DSTS_ENUMSPD_FS_PHY_48MHZ 3
-+ unsigned suspsts : 1; /*!< 00 Suspend Status */
-+ } b;
-+} dsts_data_t;
-+
-+/*!
-+ \brief Bit fields in the Device IN EP Interrupt Register
-+ and the Device IN EP Common Mask Register.
-+ */
-+typedef union diepint_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned reserved14_31 :18;
-+ unsigned nakmsk : 1; /*!< 13 NAK interrupt Mask */
-+ unsigned reserved10_12 : 3;
-+ unsigned bna : 1; /*!< 09 BNA Interrupt mask */
-+ unsigned txfifoundrn : 1; /*!< 08 Fifo Underrun Mask */
-+ unsigned emptyintr : 1; /*!< 07 IN Endpoint HAK Effective mask */
-+ unsigned inepnakeff : 1; /*!< 06 IN Endpoint HAK Effective mask */
-+ unsigned intknepmis : 1; /*!< 05 IN Token Received with EP mismatch mask */
-+ unsigned intktxfemp : 1; /*!< 04 IN Token received with TxF Empty mask */
-+ unsigned timeout : 1; /*!< 03 TimeOUT Handshake mask (non-ISOC EPs) */
-+ unsigned ahberr : 1; /*!< 02 AHB Error mask */
-+ unsigned epdisabled : 1; /*!< 01 Endpoint disable mask */
-+ unsigned xfercompl : 1; /*!< 00 Transfer complete mask */
-+ } b;
-+} diepint_data_t;
-+
-+
-+/*!
-+ \brief Bit fields in the Device OUT EP Interrupt Register and
-+ Device OUT EP Common Interrupt Mask Register.
-+ */
-+typedef union doepint_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned reserved15_31 :17;
-+ unsigned nyetmsk : 1; /*!< 14 NYET Interrupt */
-+ unsigned nakmsk : 1; /*!< 13 NAK Interrupt */
-+ unsigned bbleerrmsk : 1; /*!< 12 Babble Interrupt */
-+ unsigned reserved10_11 : 2;
-+ unsigned bna : 1; /*!< 09 BNA Interrupt */
-+ unsigned outpkterr : 1; /*!< 08 OUT packet Error */
-+ unsigned reserved07 : 1;
-+ unsigned back2backsetup : 1; /*!< 06 Back-to-Back SETUP Packets Received */
-+ unsigned stsphsercvd : 1; /*!< 05 */
-+ unsigned outtknepdis : 1; /*!< 04 OUT Token Received when Endpoint Disabled */
-+ unsigned setup : 1; /*!< 03 Setup Phase Done (contorl EPs) */
-+ unsigned ahberr : 1; /*!< 02 AHB Error */
-+ unsigned epdisabled : 1; /*!< 01 Endpoint disable */
-+ unsigned xfercompl : 1; /*!< 00 Transfer complete */
-+ } b;
-+} doepint_data_t;
-+
-+
-+/*!
-+ \brief Bit fields in the Device All EP Interrupt Registers.
-+ */
-+typedef union daint_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned out : 16; /*!< 31-16 OUT Endpoint bits */
-+ unsigned in : 16; /*!< 15-00 IN Endpoint bits */
-+ } eps;
-+ struct
-+ {
-+ /** OUT Endpoint bits */
-+ unsigned outep15 : 1;
-+ unsigned outep14 : 1;
-+ unsigned outep13 : 1;
-+ unsigned outep12 : 1;
-+ unsigned outep11 : 1;
-+ unsigned outep10 : 1;
-+ unsigned outep09 : 1;
-+ unsigned outep08 : 1;
-+ unsigned outep07 : 1;
-+ unsigned outep06 : 1;
-+ unsigned outep05 : 1;
-+ unsigned outep04 : 1;
-+ unsigned outep03 : 1;
-+ unsigned outep02 : 1;
-+ unsigned outep01 : 1;
-+ unsigned outep00 : 1;
-+ /** IN Endpoint bits */
-+ unsigned inep15 : 1;
-+ unsigned inep14 : 1;
-+ unsigned inep13 : 1;
-+ unsigned inep12 : 1;
-+ unsigned inep11 : 1;
-+ unsigned inep10 : 1;
-+ unsigned inep09 : 1;
-+ unsigned inep08 : 1;
-+ unsigned inep07 : 1;
-+ unsigned inep06 : 1;
-+ unsigned inep05 : 1;
-+ unsigned inep04 : 1;
-+ unsigned inep03 : 1;
-+ unsigned inep02 : 1;
-+ unsigned inep01 : 1;
-+ unsigned inep00 : 1;
-+ } ep;
-+} daint_data_t;
-+
-+
-+/*!
-+ \brief Bit fields in the Device IN Token Queue Read Registers.
-+ */
-+typedef union dtknq1_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned epnums0_5 :24; /*!< 31-08 EP Numbers of IN Tokens 0 ... 4 */
-+ unsigned wrap_bit : 1; /*!< 07 write pointer has wrapped */
-+ unsigned reserved05_06 : 2;
-+ unsigned intknwptr : 5; /*!< 04-00 In Token Queue Write Pointer */
-+ }b;
-+} dtknq1_data_t;
-+
-+
-+/*!
-+ \brief Bit fields in Threshold control Register
-+ */
-+typedef union dthrctl_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned reserved26_31 : 6;
-+ unsigned rx_thr_len : 9; /*!< 25-17 Rx Thr. Length */
-+ unsigned rx_thr_en : 1; /*!< 16 Rx Thr. Enable */
-+ unsigned reserved11_15 : 5;
-+ unsigned tx_thr_len : 9; /*!< 10-02 Tx Thr. Length */
-+ unsigned iso_thr_en : 1; /*!< 01 ISO Tx Thr. Enable */
-+ unsigned non_iso_thr_en : 1; /*!< 00 non ISO Tx Thr. Enable */
-+ } b;
-+} dthrctl_data_t;
-+
-+/*@}*//*IFXUSB_CSR_DEVICE_GLOBAL_REG*/
-+
-+/****************************************************************************/
-+
-+/*!
-+ \addtogroup IFXUSB_CSR_DEVICE_EP_REG
-+ */
-+/*@{*/
-+
-+/*!
-+ \struct ifxusb_dev_in_ep_regs
-+ \brief Device Logical IN Endpoint-Specific Registers.
-+ There will be one set of endpoint registers per logical endpoint
-+ implemented.
-+ each EP's IN EP Register are offset at :
-+ 900h + * (ep_num * 20h)
-+ */
-+
-+typedef struct ifxusb_dev_in_ep_regs
-+{
-+ volatile uint32_t diepctl; /*!< 00h: Endpoint Control Register */
-+ uint32_t reserved04; /*!< 04h: */
-+ volatile uint32_t diepint; /*!< 08h: Endpoint Interrupt Register */
-+ uint32_t reserved0C; /*!< 0Ch: */
-+ volatile uint32_t dieptsiz; /*!< 10h: Endpoint Transfer Size Register.*/
-+ volatile uint32_t diepdma; /*!< 14h: Endpoint DMA Address Register. */
-+ volatile uint32_t dtxfsts; /*!< 18h: Endpoint Transmit FIFO Status Register. */
-+ volatile uint32_t diepdmab; /*!< 1Ch: Endpoint DMA Buffer Register. */
-+} ifxusb_dev_in_ep_regs_t;
-+
-+/*!
-+ \brief Device Logical OUT Endpoint-Specific Registers.
-+ There will be one set of endpoint registers per logical endpoint
-+ implemented.
-+ each EP's OUT EP Register are offset at :
-+ B00h + * (ep_num * 20h) + 00h
-+ */
-+typedef struct ifxusb_dev_out_ep_regs
-+{
-+ volatile uint32_t doepctl; /*!< 00h: Endpoint Control Register */
-+ volatile uint32_t doepfn; /*!< 04h: Endpoint Frame number Register */
-+ volatile uint32_t doepint; /*!< 08h: Endpoint Interrupt Register */
-+ uint32_t reserved0C; /*!< 0Ch: */
-+ volatile uint32_t doeptsiz; /*!< 10h: Endpoint Transfer Size Register.*/
-+ volatile uint32_t doepdma; /*!< 14h: Endpoint DMA Address Register. */
-+ uint32_t reserved18; /*!< 18h: */
-+ volatile uint32_t doepdmab; /*!< 1Ch: Endpoint DMA Buffer Register. */
-+} ifxusb_dev_out_ep_regs_t;
-+
-+
-+/*!
-+ \brief Bit fields in the Device EP Control
-+ Register.
-+ */
-+typedef union depctl_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned epena : 1; /*!< 31 Endpoint Enable */
-+ unsigned epdis : 1; /*!< 30 Endpoint Disable */
-+ unsigned setd1pid : 1; /*!< 29 Set DATA1 PID (INTR/Bulk IN and OUT endpoints) */
-+ unsigned setd0pid : 1; /*!< 28 Set DATA0 PID (INTR/Bulk IN and OUT endpoints) */
-+ unsigned snak : 1; /*!< 27 Set NAK */
-+ unsigned cnak : 1; /*!< 26 Clear NAK */
-+ unsigned txfnum : 4; /*!< 25-22 Tx Fifo Number */
-+ unsigned stall : 1; /*!< 21 Stall Handshake */
-+ unsigned snp : 1; /*!< 20 Snoop Mode */
-+ unsigned eptype : 2; /*!< 19-18 Endpoint Type
-+ 0: Control
-+ 1: Isochronous
-+ 2: Bulk
-+ 3: Interrupt
-+ */
-+ unsigned naksts : 1; /*!< 17 NAK Status */
-+ unsigned dpid : 1; /*!< 16 Endpoint DPID (INTR/Bulk IN and OUT endpoints) */
-+ unsigned usbactep : 1; /*!< 15 USB Active Endpoint */
-+ unsigned nextep : 4; /*!< 14-11 Next Endpoint */
-+ unsigned mps :11; /*!< 10-00 Maximum Packet Size */
-+ #define IFXUSB_DEP0CTL_MPS_64 0
-+ #define IFXUSB_DEP0CTL_MPS_32 1
-+ #define IFXUSB_DEP0CTL_MPS_16 2
-+ #define IFXUSB_DEP0CTL_MPS_8 3
-+ } b;
-+} depctl_data_t;
-+
-+
-+/*!
-+ \brief Bit fields in the Device EP Transfer Size Register. (EP0 and EPn)
-+ */
-+typedef union deptsiz_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned reserved31 : 1;
-+ unsigned supcnt : 2; /*!< 30-29 Setup Packet Count */
-+ unsigned reserved20_28 : 9;
-+ unsigned pktcnt : 1; /*!< 19 Packet Count */
-+ unsigned reserved7_18 :12;
-+ unsigned xfersize : 7; /*!< 06-00 Transfer size */
-+ }b0;
-+ struct
-+ {
-+ unsigned reserved : 1;
-+ unsigned mc : 2; /*!< 30-29 Multi Count */
-+ unsigned pktcnt :10; /*!< 28-19 Packet Count */
-+ unsigned xfersize :19; /*!< 18-00 Transfer size */
-+ } b;
-+} deptsiz_data_t;
-+
-+/*@}*//*IFXUSB_CSR_DEVICE_EP_REG*/
-+/****************************************************************************/
-+
-+/*!
-+ \addtogroup IFXUSB_CSR_DEVICE_DMA_DESC
-+ */
-+/*@{*/
-+/*!
-+ \struct desc_sts_data
-+ \brief Bit fields in the DMA Descriptor status quadlet.
-+ */
-+typedef union desc_sts_data
-+{
-+ struct
-+ {
-+ unsigned bs : 2; /*!< 31-30 Buffer Status */
-+ #define BS_HOST_READY 0x0
-+ #define BS_DMA_BUSY 0x1
-+ #define BS_DMA_DONE 0x2
-+ #define BS_HOST_BUSY 0x3
-+ unsigned sts : 2; /*!< 29-28 Receive/Trasmit Status */
-+ #define RTS_SUCCESS 0x0
-+ #define RTS_BUFFLUSH 0x1
-+ #define RTS_RESERVED 0x2
-+ #define RTS_BUFERR 0x3
-+ unsigned l : 1; /*!< 27 Last */
-+ unsigned sp : 1; /*!< 26 Short Packet */
-+ unsigned ioc : 1; /*!< 25 Interrupt On Complete */
-+ unsigned sr : 1; /*!< 24 Setup Packet received */
-+ unsigned mtrf : 1; /*!< 23 Multiple Transfer */
-+ unsigned reserved16_22 : 7;
-+ unsigned bytes :16; /*!< 15-00 Transfer size in bytes */
-+ } b;
-+ uint32_t d32; /*!< DMA Descriptor data buffer pointer */
-+} desc_sts_data_t;
-+
-+/*@}*//*IFXUSB_CSR_DEVICE_DMA_DESC*/
-+/****************************************************************************/
-+
-+/*!
-+ \addtogroup IFXUSB_CSR_HOST_GLOBAL_REG
-+ */
-+/*@{*/
-+/*!
-+ \struct ifxusb_host_global_regs
-+ \brief IFXUSB Host Mode Global registers. Offsets 400h-7FFh
-+ The ifxusb_host_global_regs structure defines the size
-+ and relative field offsets for the Host Global registers.
-+ These registers are visible only in Host mode and must not be
-+ accessed in Device mode, as the results are unknown.
-+ */
-+typedef struct ifxusb_host_global_regs
-+{
-+ volatile uint32_t hcfg; /*!< 400h Host Configuration Register. */
-+ volatile uint32_t hfir; /*!< 404h Host Frame Interval Register. */
-+ volatile uint32_t hfnum; /*!< 408h Host Frame Number / Frame Remaining Register. */
-+ uint32_t reserved40C;
-+ volatile uint32_t hptxsts; /*!< 410h Host Periodic Transmit FIFO/ Queue Status Register. */
-+ volatile uint32_t haint; /*!< 414h Host All Channels Interrupt Register. */
-+ volatile uint32_t haintmsk; /*!< 418h Host All Channels Interrupt Mask Register. */
-+} ifxusb_host_global_regs_t;
-+
-+/*!
-+ \brief Bit fields in the Host Configuration Register.
-+ */
-+typedef union hcfg_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned reserved31_03 :29;
-+ unsigned fslssupp : 1; /*!< 02 FS/LS Only Support */
-+ unsigned fslspclksel : 2; /*!< 01-00 FS/LS Phy Clock Select */
-+ #define IFXUSB_HCFG_30_60_MHZ 0
-+ #define IFXUSB_HCFG_48_MHZ 1
-+ #define IFXUSB_HCFG_6_MHZ 2
-+ } b;
-+} hcfg_data_t;
-+
-+/*!
-+ \brief Bit fields in the Host Frame Interval Register.
-+ */
-+typedef union hfir_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned reserved : 16;
-+ unsigned frint : 16; /*!< 15-00 Frame Interval */
-+ } b;
-+} hfir_data_t;
-+
-+/*!
-+ \brief Bit fields in the Host Frame Time Remaing/Number Register.
-+ */
-+typedef union hfnum_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned frrem : 16; /*!< 31-16 Frame Time Remaining */
-+ unsigned frnum : 16; /*!< 15-00 Frame Number*/
-+ #define IFXUSB_HFNUM_MAX_FRNUM 0x3FFF
-+ } b;
-+} hfnum_data_t;
-+
-+/*!
-+ \brief Bit fields in the Host Periodic Transmit FIFO/Queue Status Register
-+ */
-+typedef union hptxsts_data
-+{
-+ /** raw register data */
-+ uint32_t d32;
-+ struct
-+ {
-+ /** Top of the Periodic Transmit Request Queue
-+ * - bit 24 - Terminate (last entry for the selected channel)
-+ */
-+ unsigned ptxqtop_odd : 1; /*!< 31 Top of the Periodic Transmit Request
-+ Queue Odd/even microframe*/
-+ unsigned ptxqtop_chnum : 4; /*!< 30-27 Top of the Periodic Transmit Request
-+ Channel Number */
-+ unsigned ptxqtop_token : 2; /*!< 26-25 Top of the Periodic Transmit Request
-+ Token Type
-+ 0 - Zero length
-+ 1 - Ping
-+ 2 - Disable
-+ */
-+ unsigned ptxqtop_terminate : 1; /*!< 24 Top of the Periodic Transmit Request
-+ Terminate (last entry for the selected channel)*/
-+ unsigned ptxqspcavail : 8; /*!< 23-16 Periodic Transmit Request Queue Space Available */
-+ unsigned ptxfspcavail :16; /*!< 15-00 Periodic Transmit Data FIFO Space Available */
-+ } b;
-+} hptxsts_data_t;
-+
-+/*!
-+ \brief Bit fields in the Host Port Control and Status Register.
-+ */
-+typedef union hprt0_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned reserved19_31 :13;
-+ unsigned prtspd : 2; /*!< 18-17 Port Speed */
-+ #define IFXUSB_HPRT0_PRTSPD_HIGH_SPEED 0
-+ #define IFXUSB_HPRT0_PRTSPD_FULL_SPEED 1
-+ #define IFXUSB_HPRT0_PRTSPD_LOW_SPEED 2
-+ unsigned prttstctl : 4; /*!< 16-13 Port Test Control */
-+ unsigned prtpwr : 1; /*!< 12 Port Power */
-+ unsigned prtlnsts : 2; /*!< 11-10 Port Line Status */
-+ unsigned reserved9 : 1;
-+ unsigned prtrst : 1; /*!< 08 Port Reset */
-+ unsigned prtsusp : 1; /*!< 07 Port Suspend */
-+ unsigned prtres : 1; /*!< 06 Port Resume */
-+ unsigned prtovrcurrchng : 1; /*!< 05 Port Overcurrent Change */
-+ unsigned prtovrcurract : 1; /*!< 04 Port Overcurrent Active */
-+ unsigned prtenchng : 1; /*!< 03 Port Enable/Disable Change */
-+ unsigned prtena : 1; /*!< 02 Port Enable */
-+ unsigned prtconndet : 1; /*!< 01 Port Connect Detected */
-+ unsigned prtconnsts : 1; /*!< 00 Port Connect Status */
-+ }b;
-+} hprt0_data_t;
-+
-+/*!
-+ \brief Bit fields in the Host All Interrupt Register.
-+ */
-+typedef union haint_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned reserved : 16;
-+ unsigned ch15 : 1;
-+ unsigned ch14 : 1;
-+ unsigned ch13 : 1;
-+ unsigned ch12 : 1;
-+ unsigned ch11 : 1;
-+ unsigned ch10 : 1;
-+ unsigned ch09 : 1;
-+ unsigned ch08 : 1;
-+ unsigned ch07 : 1;
-+ unsigned ch06 : 1;
-+ unsigned ch05 : 1;
-+ unsigned ch04 : 1;
-+ unsigned ch03 : 1;
-+ unsigned ch02 : 1;
-+ unsigned ch01 : 1;
-+ unsigned ch00 : 1;
-+ } b;
-+ struct
-+ {
-+ unsigned reserved : 16;
-+ unsigned chint : 16;
-+ } b2;
-+} haint_data_t;
-+/*@}*//*IFXUSB_CSR_HOST_GLOBAL_REG*/
-+/****************************************************************************/
-+/*!
-+ \addtogroup IFXUSB_CSR_HOST_HC_REG
-+ */
-+/*@{*/
-+/*!
-+ \brief Host Channel Specific Registers
-+ There will be one set of hc registers per host channelimplemented.
-+ each HC's Register are offset at :
-+ 500h + * (hc_num * 20h)
-+ */
-+typedef struct ifxusb_hc_regs
-+{
-+ volatile uint32_t hcchar; /*!< 00h Host Channel Characteristic Register.*/
-+ volatile uint32_t hcsplt; /*!< 04h Host Channel Split Control Register.*/
-+ volatile uint32_t hcint; /*!< 08h Host Channel Interrupt Register. */
-+ volatile uint32_t hcintmsk; /*!< 0Ch Host Channel Interrupt Mask Register. */
-+ volatile uint32_t hctsiz; /*!< 10h Host Channel Transfer Size Register. */
-+ volatile uint32_t hcdma; /*!< 14h Host Channel DMA Address Register. */
-+ uint32_t reserved[2]; /*!< 18h Reserved. */
-+} ifxusb_hc_regs_t;
-+
-+
-+/*!
-+ \brief Bit fields in the Host Channel Characteristics Register.
-+ */
-+typedef union hcchar_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned chen : 1; /*!< 31 Channel enable */
-+ unsigned chdis : 1; /*!< 30 Channel disable */
-+ unsigned oddfrm : 1; /*!< 29 Frame to transmit periodic transaction */
-+ unsigned devaddr : 7; /*!< 28-22 Device address */
-+ unsigned multicnt : 2; /*!< 21-20 Packets per frame for periodic transfers */
-+ unsigned eptype : 2; /*!< 19-18 0: Control, 1: Isoc, 2: Bulk, 3: Intr */
-+ unsigned lspddev : 1; /*!< 17 0: Full/high speed device, 1: Low speed device */
-+ unsigned reserved : 1;
-+ unsigned epdir : 1; /*!< 15 0: OUT, 1: IN */
-+ unsigned epnum : 4; /*!< 14-11 Endpoint number */
-+ unsigned mps :11; /*!< 10-00 Maximum packet size in bytes */
-+ } b;
-+} hcchar_data_t;
-+
-+/*!
-+ \brief Bit fields in the Host Channel Split Control Register
-+ */
-+typedef union hcsplt_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned spltena : 1; /*!< 31 Split Enble */
-+ unsigned reserved :14;
-+ unsigned compsplt : 1; /*!< 16 Do Complete Split */
-+ unsigned xactpos : 2; /*!< 15-14 Transaction Position */
-+ #define IFXUSB_HCSPLIT_XACTPOS_MID 0
-+ #define IFXUSB_HCSPLIT_XACTPOS_END 1
-+ #define IFXUSB_HCSPLIT_XACTPOS_BEGIN 2
-+ #define IFXUSB_HCSPLIT_XACTPOS_ALL 3
-+ unsigned hubaddr : 7; /*!< 13-07 Hub Address */
-+ unsigned prtaddr : 7; /*!< 06-00 Port Address */
-+ } b;
-+} hcsplt_data_t;
-+
-+/*!
-+ \brief Bit fields in the Host Interrupt Register.
-+ */
-+typedef union hcint_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned reserved :21;
-+ unsigned datatglerr : 1; /*!< 10 Data Toggle Error */
-+ unsigned frmovrun : 1; /*!< 09 Frame Overrun */
-+ unsigned bblerr : 1; /*!< 08 Babble Error */
-+ unsigned xacterr : 1; /*!< 07 Transaction Err */
-+ unsigned nyet : 1; /*!< 06 NYET Response Received */
-+ unsigned ack : 1; /*!< 05 ACK Response Received */
-+ unsigned nak : 1; /*!< 04 NAK Response Received */
-+ unsigned stall : 1; /*!< 03 STALL Response Received */
-+ unsigned ahberr : 1; /*!< 02 AHB Error */
-+ unsigned chhltd : 1; /*!< 01 Channel Halted */
-+ unsigned xfercomp : 1; /*!< 00 Channel Halted */
-+ }b;
-+} hcint_data_t;
-+
-+
-+/*!
-+ \brief Bit fields in the Host Channel Transfer Size
-+ Register.
-+ */
-+typedef union hctsiz_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ /** */
-+ unsigned dopng : 1; /*!< 31 Do PING protocol when 1 */
-+ /**
-+ * Packet ID for next data packet
-+ * 0: DATA0
-+ * 1: DATA2
-+ * 2: DATA1
-+ * 3: MDATA (non-Control), SETUP (Control)
-+ */
-+ unsigned pid : 2; /*!< 30-29 Packet ID for next data packet
-+ 0: DATA0
-+ 1: DATA2
-+ 2: DATA1
-+ 3: MDATA (non-Control), SETUP (Control)
-+ */
-+ #define IFXUSB_HCTSIZ_DATA0 0
-+ #define IFXUSB_HCTSIZ_DATA1 2
-+ #define IFXUSB_HCTSIZ_DATA2 1
-+ #define IFXUSB_HCTSIZ_MDATA 3
-+ #define IFXUSB_HCTSIZ_SETUP 3
-+ unsigned pktcnt :10; /*!< 28-19 Data packets to transfer */
-+ unsigned xfersize :19; /*!< 18-00 Total transfer size in bytes */
-+ }b;
-+} hctsiz_data_t;
-+
-+/*@}*//*IFXUSB_CSR_HOST_HC_REG*/
-+
-+/****************************************************************************/
-+
-+/*!
-+ \addtogroup IFXUSB_CSR_PWR_CLK_GATING_REG
-+ */
-+/*@{*/
-+/*!
-+ \brief Bit fields in the Power and Clock Gating Control Register
-+ */
-+typedef union pcgcctl_data
-+{
-+ uint32_t d32;
-+ struct
-+ {
-+ unsigned reserved : 27;
-+ unsigned physuspended : 1; /*!< 04 PHY Suspended */
-+ unsigned rstpdwnmodule : 1; /*!< 03 Reset Power Down Modules */
-+ unsigned pwrclmp : 1; /*!< 02 Power Clamp */
-+ unsigned gatehclk : 1; /*!< 01 Gate Hclk */
-+ unsigned stoppclk : 1; /*!< 00 Stop Pclk */
-+ } b;
-+} pcgcctl_data_t;
-+/*@}*//*IFXUSB_CSR_PWR_CLK_GATING_REG*/
-+
-+/****************************************************************************/
-+
-+#endif //__IFXUSB_REGS_H__
---- /dev/null
-+++ b/drivers/usb/ifxhcd/ifxusb_version.h
-@@ -0,0 +1,5 @@
-+
-+#ifndef IFXUSB_VERSION
-+#define IFXUSB_VERSION "3.0alpha B100312"
-+#endif
-+
+++ /dev/null
-From a7c55f5e927b69bb30912fe1c3e5bcd8751e8381 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 14 Mar 2012 15:37:19 +0100
-Subject: [PATCH 51/70] MIPS: adds gptu driver
-
----
- arch/mips/lantiq/xway/gptu.c | 176 ++++++++++++++++++++++++++++++++++++++++++
- 1 files changed, 176 insertions(+), 0 deletions(-)
- create mode 100644 arch/mips/lantiq/xway/gptu.c
-
---- /dev/null
-+++ b/arch/mips/lantiq/xway/gptu.c
-@@ -0,0 +1,176 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/ioport.h>
-+#include <linux/pm.h>
-+#include <linux/export.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <asm/reboot.h>
-+
-+#include <lantiq_soc.h>
-+#include "../clk.h"
-+
-+#include "../devices.h"
-+
-+#define ltq_gptu_w32(x, y) ltq_w32((x), ltq_gptu_membase + (y))
-+#define ltq_gptu_r32(x) ltq_r32(ltq_gptu_membase + (x))
-+
-+
-+/* the magic ID byte of the core */
-+#define GPTU_MAGIC 0x59
-+/* clock control register */
-+#define GPTU_CLC 0x00
-+/* id register */
-+#define GPTU_ID 0x08
-+/* interrupt node enable */
-+#define GPTU_IRNEN 0xf4
-+/* interrupt control register */
-+#define GPTU_IRCR 0xf8
-+/* interrupt capture register */
-+#define GPTU_IRNCR 0xfc
-+/* there are 3 identical blocks of 2 timers. calculate register offsets */
-+#define GPTU_SHIFT(x) (x % 2 ? 4 : 0)
-+#define GPTU_BASE(x) (((x >> 1) * 0x20) + 0x10)
-+/* timer control register */
-+#define GPTU_CON(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x00)
-+/* timer auto reload register */
-+#define GPTU_RUN(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x08)
-+/* timer manual reload register */
-+#define GPTU_RLD(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x10)
-+/* timer count register */
-+#define GPTU_CNT(x) (GPTU_BASE(x) + GPTU_SHIFT(x) + 0x18)
-+
-+/* GPTU_CON(x) */
-+#define CON_CNT BIT(2)
-+#define CON_EDGE_FALL BIT(7)
-+#define CON_SYNC BIT(8)
-+#define CON_CLK_INT BIT(10)
-+
-+/* GPTU_RUN(x) */
-+#define RUN_SEN BIT(0)
-+#define RUN_RL BIT(2)
-+
-+/* set clock to runmode */
-+#define CLC_RMC BIT(8)
-+/* bring core out of suspend */
-+#define CLC_SUSPEND BIT(4)
-+/* the disable bit */
-+#define CLC_DISABLE BIT(0)
-+
-+#define TIMER_INTERRUPT (INT_NUM_IM3_IRL0 + 22)
-+
-+enum gptu_timer {
-+ TIMER1A = 0,
-+ TIMER1B,
-+ TIMER2A,
-+ TIMER2B,
-+ TIMER3A,
-+ TIMER3B
-+};
-+
-+static struct resource ltq_gptu_resource =
-+ MEM_RES("GPTU", LTQ_GPTU_BASE_ADDR, LTQ_GPTU_SIZE);
-+
-+static void __iomem *ltq_gptu_membase;
-+
-+static irqreturn_t timer_irq_handler(int irq, void *priv)
-+{
-+ int timer = irq - TIMER_INTERRUPT;
-+ ltq_gptu_w32(1 << timer, GPTU_IRNCR);
-+ return IRQ_HANDLED;
-+}
-+
-+static void gptu_hwinit(void)
-+{
-+ struct clk *clk = clk_get_sys("ltq_gptu", NULL);
-+ clk_enable(clk);
-+ ltq_gptu_w32(0x00, GPTU_IRNEN);
-+ ltq_gptu_w32(0xff, GPTU_IRNCR);
-+ ltq_gptu_w32(CLC_RMC | CLC_SUSPEND, GPTU_CLC);
-+}
-+
-+static void gptu_hwexit(void)
-+{
-+ ltq_gptu_w32(0x00, GPTU_IRNEN);
-+ ltq_gptu_w32(0xff, GPTU_IRNCR);
-+ ltq_gptu_w32(CLC_DISABLE, GPTU_CLC);
-+}
-+
-+static int ltq_gptu_enable(struct clk *clk)
-+{
-+ int ret = request_irq(TIMER_INTERRUPT + clk->bits, timer_irq_handler,
-+ IRQF_TIMER, "timer", NULL);
-+ if (ret) {
-+ pr_err("gptu: failed to request irq\n");
-+ return ret;
-+ }
-+
-+ ltq_gptu_w32(CON_CNT | CON_EDGE_FALL | CON_SYNC | CON_CLK_INT,
-+ GPTU_CON(clk->bits));
-+ ltq_gptu_w32(1, GPTU_RLD(clk->bits));
-+ ltq_gptu_w32(ltq_gptu_r32(GPTU_IRNEN) | clk->bits, GPTU_IRNEN);
-+ ltq_gptu_w32(RUN_SEN | RUN_RL, GPTU_RUN(clk->bits));
-+ return 0;
-+}
-+
-+static void ltq_gptu_disable(struct clk *clk)
-+{
-+ ltq_gptu_w32(0, GPTU_RUN(clk->bits));
-+ ltq_gptu_w32(0, GPTU_CON(clk->bits));
-+ ltq_gptu_w32(0, GPTU_RLD(clk->bits));
-+ ltq_gptu_w32(ltq_gptu_r32(GPTU_IRNEN) & ~clk->bits, GPTU_IRNEN);
-+ free_irq(TIMER_INTERRUPT + clk->bits, NULL);
-+}
-+
-+static inline void clkdev_add_gptu(const char *con, unsigned int timer)
-+{
-+ struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
-+
-+ clk->cl.dev_id = "ltq_gptu";
-+ clk->cl.con_id = con;
-+ clk->cl.clk = clk;
-+ clk->enable = ltq_gptu_enable;
-+ clk->disable = ltq_gptu_disable;
-+ clk->bits = timer;
-+ clkdev_add(&clk->cl);
-+}
-+
-+static int __init gptu_setup(void)
-+{
-+ /* remap gptu register range */
-+ ltq_gptu_membase = ltq_remap_resource(<q_gptu_resource);
-+ if (!ltq_gptu_membase)
-+ panic("Failed to remap gptu memory");
-+
-+ /* power up the core */
-+ gptu_hwinit();
-+
-+ /* the gptu has a ID register */
-+ if (((ltq_gptu_r32(GPTU_ID) >> 8) & 0xff) != GPTU_MAGIC) {
-+ pr_err("gptu: failed to find magic\n");
-+ gptu_hwexit();
-+ return -ENAVAIL;
-+ }
-+
-+ /* register the clocks */
-+ clkdev_add_gptu("timer1a", TIMER1A);
-+ clkdev_add_gptu("timer1b", TIMER1B);
-+ clkdev_add_gptu("timer2a", TIMER2A);
-+ clkdev_add_gptu("timer2b", TIMER2B);
-+ clkdev_add_gptu("timer3a", TIMER3A);
-+ clkdev_add_gptu("timer3b", TIMER3B);
-+
-+ pr_info("gptu: 6 timers loaded\n");
-+
-+ return 0;
-+}
-+
-+arch_initcall(gptu_setup);
--- /dev/null
+From 6a3a89057dbb65c67be80641f13f34c599ee3863 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 12:00:17 +0100
+Subject: [PATCH 51/73] MIPS: lantiq: pci: rename variable inside
+
+* rename a global var inside the pci code
+---
+ arch/mips/pci/ops-lantiq.c | 6 +++---
+ arch/mips/pci/pci-lantiq.c | 6 +++---
+ arch/mips/pci/pci-lantiq.h | 2 +-
+ 3 files changed, 7 insertions(+), 7 deletions(-)
+
+diff --git a/arch/mips/pci/ops-lantiq.c b/arch/mips/pci/ops-lantiq.c
+index 1f2afb5..5cbb0cf 100644
+--- a/arch/mips/pci/ops-lantiq.c
++++ b/arch/mips/pci/ops-lantiq.c
+@@ -41,7 +41,7 @@ static int ltq_pci_config_access(unsigned char access_type, struct pci_bus *bus,
+
+ spin_lock_irqsave(&ebu_lock, flags);
+
+- cfg_base = (unsigned long) ltq_pci_mapped_cfg;
++ cfg_base = (unsigned long) ltq_pci_cfgbase;
+ cfg_base |= (bus->number << LTQ_PCI_CFG_BUSNUM_SHF) | (devfn <<
+ LTQ_PCI_CFG_FUNNUM_SHF) | (where & ~0x3);
+
+@@ -55,11 +55,11 @@ static int ltq_pci_config_access(unsigned char access_type, struct pci_bus *bus,
+ wmb();
+
+ /* clean possible Master abort */
+- cfg_base = (unsigned long) ltq_pci_mapped_cfg;
++ cfg_base = (unsigned long) ltq_pci_cfgbase;
+ cfg_base |= (0x0 << LTQ_PCI_CFG_FUNNUM_SHF) + 4;
+ temp = ltq_r32(((u32 *)(cfg_base)));
+ temp = swab32(temp);
+- cfg_base = (unsigned long) ltq_pci_mapped_cfg;
++ cfg_base = (unsigned long) ltq_pci_cfgbase;
+ cfg_base |= (0x68 << LTQ_PCI_CFG_FUNNUM_SHF) + 4;
+ ltq_w32(temp, ((u32 *)cfg_base));
+
+diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
+index 47b551c..efcdd45 100644
+--- a/arch/mips/pci/pci-lantiq.c
++++ b/arch/mips/pci/pci-lantiq.c
+@@ -65,8 +65,8 @@
+ #define ltq_pci_w32(x, y) ltq_w32((x), ltq_pci_membase + (y))
+ #define ltq_pci_r32(x) ltq_r32(ltq_pci_membase + (x))
+
+-#define ltq_pci_cfg_w32(x, y) ltq_w32((x), ltq_pci_mapped_cfg + (y))
+-#define ltq_pci_cfg_r32(x) ltq_r32(ltq_pci_mapped_cfg + (x))
++#define ltq_pci_cfg_w32(x, y) ltq_w32((x), ltq_pci_cfgbase + (y))
++#define ltq_pci_cfg_r32(x) ltq_r32(ltq_pci_cfgbase + (x))
+
+ struct ltq_pci_gpio_map {
+ int pin;
+@@ -273,7 +273,7 @@ static int __devinit ltq_pci_probe(struct platform_device *pdev)
+ pci_probe_only = 0;
+ ltq_pci_irq_map = ltq_pci_data->irq;
+ ltq_pci_membase = ioremap_nocache(PCI_CR_BASE_ADDR, PCI_CR_SIZE);
+- ltq_pci_mapped_cfg =
++ ltq_pci_cfgbase =
+ ioremap_nocache(LTQ_PCI_CFG_BASE, LTQ_PCI_CFG_BASE);
+ ltq_pci_controller.io_map_base =
+ (unsigned long)ioremap(LTQ_PCI_IO_BASE, LTQ_PCI_IO_SIZE - 1);
+diff --git a/arch/mips/pci/pci-lantiq.h b/arch/mips/pci/pci-lantiq.h
+index 66bf6cd..c4721b4 100644
+--- a/arch/mips/pci/pci-lantiq.h
++++ b/arch/mips/pci/pci-lantiq.h
+@@ -9,7 +9,7 @@
+ #ifndef _LTQ_PCI_H__
+ #define _LTQ_PCI_H__
+
+-extern __iomem void *ltq_pci_mapped_cfg;
++extern __iomem void *ltq_pci_cfgbase;
+ extern int ltq_pci_read_config_dword(struct pci_bus *bus,
+ unsigned int devfn, int where, int size, u32 *val);
+ extern int ltq_pci_write_config_dword(struct pci_bus *bus,
+--
+1.7.9.1
+
--- /dev/null
+From 3ea2b94a6721ebdde4508ef7d35521f1b8f06351 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 13:13:31 +0100
+Subject: [PATCH 52/73] MIPS: lantiq: pci: give xway pci support its own
+ kbuild symbol
+
+---
+ arch/mips/lantiq/Kconfig | 5 +++++
+ arch/mips/pci/Makefile | 2 +-
+ 2 files changed, 6 insertions(+), 1 deletions(-)
+
+diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
+index cb6b39f..dde9fc6 100644
+--- a/arch/mips/lantiq/Kconfig
++++ b/arch/mips/lantiq/Kconfig
+@@ -19,8 +19,13 @@ config SOC_XWAY
+
+ config SOC_FALCON
+ bool "FALCON"
++
+ endchoice
+
++config PCI_LANTIQ
++ bool "PCI Support"
++ depends on SOC_XWAY && PCI
++
+ source "arch/mips/lantiq/xway/Kconfig"
+ source "arch/mips/lantiq/falcon/Kconfig"
+
+diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
+index bb82cbd..afad91d 100644
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -40,7 +40,7 @@ obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o
+ obj-$(CONFIG_SIBYTE_BCM112X) += fixup-sb1250.o pci-sb1250.o
+ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
+ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
+-obj-$(CONFIG_SOC_XWAY) += pci-lantiq.o ops-lantiq.o
++obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
+ obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
+ obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
+ obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o
+--
+1.7.9.1
+
+++ /dev/null
-From 3571f6a294783e617c2f8f52021f9c33bc9e5a36 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 8 Mar 2012 12:00:17 +0100
-Subject: [PATCH 52/70] MIPS: lantiq: pci: rename variable inside
-
-* rename a global var inside the pci code
----
- arch/mips/pci/ops-lantiq.c | 6 +++---
- arch/mips/pci/pci-lantiq.c | 6 +++---
- arch/mips/pci/pci-lantiq.h | 2 +-
- 3 files changed, 7 insertions(+), 7 deletions(-)
-
---- a/arch/mips/pci/ops-lantiq.c
-+++ b/arch/mips/pci/ops-lantiq.c
-@@ -41,7 +41,7 @@ static int ltq_pci_config_access(unsigne
-
- spin_lock_irqsave(&ebu_lock, flags);
-
-- cfg_base = (unsigned long) ltq_pci_mapped_cfg;
-+ cfg_base = (unsigned long) ltq_pci_cfgbase;
- cfg_base |= (bus->number << LTQ_PCI_CFG_BUSNUM_SHF) | (devfn <<
- LTQ_PCI_CFG_FUNNUM_SHF) | (where & ~0x3);
-
-@@ -55,11 +55,11 @@ static int ltq_pci_config_access(unsigne
- wmb();
-
- /* clean possible Master abort */
-- cfg_base = (unsigned long) ltq_pci_mapped_cfg;
-+ cfg_base = (unsigned long) ltq_pci_cfgbase;
- cfg_base |= (0x0 << LTQ_PCI_CFG_FUNNUM_SHF) + 4;
- temp = ltq_r32(((u32 *)(cfg_base)));
- temp = swab32(temp);
-- cfg_base = (unsigned long) ltq_pci_mapped_cfg;
-+ cfg_base = (unsigned long) ltq_pci_cfgbase;
- cfg_base |= (0x68 << LTQ_PCI_CFG_FUNNUM_SHF) + 4;
- ltq_w32(temp, ((u32 *)cfg_base));
-
---- a/arch/mips/pci/pci-lantiq.c
-+++ b/arch/mips/pci/pci-lantiq.c
-@@ -65,8 +65,8 @@
- #define ltq_pci_w32(x, y) ltq_w32((x), ltq_pci_membase + (y))
- #define ltq_pci_r32(x) ltq_r32(ltq_pci_membase + (x))
-
--#define ltq_pci_cfg_w32(x, y) ltq_w32((x), ltq_pci_mapped_cfg + (y))
--#define ltq_pci_cfg_r32(x) ltq_r32(ltq_pci_mapped_cfg + (x))
-+#define ltq_pci_cfg_w32(x, y) ltq_w32((x), ltq_pci_cfgbase + (y))
-+#define ltq_pci_cfg_r32(x) ltq_r32(ltq_pci_cfgbase + (x))
-
- struct ltq_pci_gpio_map {
- int pin;
-@@ -273,7 +273,7 @@ static int __devinit ltq_pci_probe(struc
- pci_probe_only = 0;
- ltq_pci_irq_map = ltq_pci_data->irq;
- ltq_pci_membase = ioremap_nocache(PCI_CR_BASE_ADDR, PCI_CR_SIZE);
-- ltq_pci_mapped_cfg =
-+ ltq_pci_cfgbase =
- ioremap_nocache(LTQ_PCI_CFG_BASE, LTQ_PCI_CFG_BASE);
- ltq_pci_controller.io_map_base =
- (unsigned long)ioremap(LTQ_PCI_IO_BASE, LTQ_PCI_IO_SIZE - 1);
---- a/arch/mips/pci/pci-lantiq.h
-+++ b/arch/mips/pci/pci-lantiq.h
-@@ -9,7 +9,7 @@
- #ifndef _LTQ_PCI_H__
- #define _LTQ_PCI_H__
-
--extern __iomem void *ltq_pci_mapped_cfg;
-+extern __iomem void *ltq_pci_cfgbase;
- extern int ltq_pci_read_config_dword(struct pci_bus *bus,
- unsigned int devfn, int where, int size, u32 *val);
- extern int ltq_pci_write_config_dword(struct pci_bus *bus,
+++ /dev/null
-From 00dda451e12b6fc519cd4f575a696c4216f45992 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 8 Mar 2012 13:13:31 +0100
-Subject: [PATCH 53/70] MIPS: lantiq: pci: give xway pci support its own
- kbuild symbol
-
----
- arch/mips/lantiq/Kconfig | 5 +++++
- arch/mips/pci/Makefile | 2 +-
- 2 files changed, 6 insertions(+), 1 deletions(-)
-
---- a/arch/mips/lantiq/Kconfig
-+++ b/arch/mips/lantiq/Kconfig
-@@ -19,8 +19,13 @@ config SOC_XWAY
-
- config SOC_FALCON
- bool "FALCON"
-+
- endchoice
-
-+config PCI_LANTIQ
-+ bool "PCI Support"
-+ depends on SOC_XWAY && PCI
-+
- source "arch/mips/lantiq/xway/Kconfig"
- source "arch/mips/lantiq/falcon/Kconfig"
-
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -40,7 +40,7 @@ obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1
- obj-$(CONFIG_SIBYTE_BCM112X) += fixup-sb1250.o pci-sb1250.o
- obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
- obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
--obj-$(CONFIG_SOC_XWAY) += pci-lantiq.o ops-lantiq.o
-+obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
- obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
- obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
- obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o
--- /dev/null
+From e6b9f3ea5f2f3f8a66d6650c16f3537288806c0b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 15:53:10 +0100
+Subject: [PATCH 53/73] MIPS: lantiq: pci: move pcibios code into
+ fixup-lantiq.c
+
+---
+ arch/mips/pci/Makefile | 1 +
+ arch/mips/pci/fixup-lantiq.c | 42 ++++++++++++++++++++++++++++++++++++++++++
+ arch/mips/pci/pci-lantiq.c | 24 ++----------------------
+ 3 files changed, 45 insertions(+), 22 deletions(-)
+ create mode 100644 arch/mips/pci/fixup-lantiq.c
+
+diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
+index afad91d..3ca5f75 100644
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -40,6 +40,7 @@ obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o
+ obj-$(CONFIG_SIBYTE_BCM112X) += fixup-sb1250.o pci-sb1250.o
+ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
+ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
++obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
+ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
+ obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
+ obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
+diff --git a/arch/mips/pci/fixup-lantiq.c b/arch/mips/pci/fixup-lantiq.c
+new file mode 100644
+index 0000000..daf5ae9
+--- /dev/null
++++ b/arch/mips/pci/fixup-lantiq.c
+@@ -0,0 +1,42 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/of_irq.h>
++#include <linux/of_pci.h>
++
++int (*ltqpci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin) = NULL;
++int (*ltqpci_plat_arch_init)(struct pci_dev *dev) = NULL;
++int (*ltqpci_plat_dev_init)(struct pci_dev *dev) = NULL;
++int *ltq_pci_irq_map;
++
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++ if (ltqpci_plat_arch_init)
++ return ltqpci_plat_arch_init(dev);
++
++ if (ltqpci_plat_dev_init)
++ return ltqpci_plat_dev_init(dev);
++
++ return 0;
++}
++
++int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++ if (ltqpci_map_irq)
++ return ltqpci_map_irq(dev, slot, pin);
++ if (ltq_pci_irq_map[slot]) {
++ dev_info(&dev->dev, "SLOT:%d PIN:%d IRQ:%d\n", slot, pin, ltq_pci_irq_map[slot]);
++ return ltq_pci_irq_map[slot];
++ }
++ printk(KERN_ERR "lq_pci: trying to map irq for unknown slot %d\n",
++ slot);
++
++ return 0;
++}
++
++
+diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
+index efcdd45..7a29738 100644
+--- a/arch/mips/pci/pci-lantiq.c
++++ b/arch/mips/pci/pci-lantiq.c
+@@ -93,16 +93,14 @@ static struct ltq_pci_gpio_map ltq_pci_gpio_map[] = {
+ { 37, 2, 0, "pci-req4" },
+ };
+
+-__iomem void *ltq_pci_mapped_cfg;
++__iomem void *ltq_pci_cfgbase;
+ static __iomem void *ltq_pci_membase;
+
+-int (*ltqpci_plat_dev_init)(struct pci_dev *dev) = NULL;
+-
+ /* Since the PCI REQ pins can be reused for other functionality, make it
+ possible to exclude those from interpretation by the PCI controller */
+ static int ltq_pci_req_mask = 0xf;
+
+-static int *ltq_pci_irq_map;
++extern int *ltq_pci_irq_map;
+
+ struct pci_ops ltq_pci_ops = {
+ .read = ltq_pci_read_config_dword,
+@@ -131,14 +129,6 @@ static struct pci_controller ltq_pci_controller = {
+ .io_offset = 0x00000000UL,
+ };
+
+-int pcibios_plat_dev_init(struct pci_dev *dev)
+-{
+- if (ltqpci_plat_dev_init)
+- return ltqpci_plat_dev_init(dev);
+-
+- return 0;
+-}
+-
+ static u32 ltq_calc_bar11mask(void)
+ {
+ u32 mem, bar11mask;
+@@ -256,16 +246,6 @@ static int __devinit ltq_pci_startup(struct device *dev)
+ return 0;
+ }
+
+-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+-{
+- if (ltq_pci_irq_map[slot])
+- return ltq_pci_irq_map[slot];
+- printk(KERN_ERR "lq_pci: trying to map irq for unknown slot %d\n",
+- slot);
+-
+- return 0;
+-}
+-
+ static int __devinit ltq_pci_probe(struct platform_device *pdev)
+ {
+ struct ltq_pci_data *ltq_pci_data =
+--
+1.7.9.1
+
+++ /dev/null
-From 49b5d2242091e216736216d98d7f940870d4f1ec Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 8 Mar 2012 15:53:10 +0100
-Subject: [PATCH 54/70] MIPS: lantiq: pci: move pcibios code into
- fixup-lantiq.c
-
----
- arch/mips/pci/Makefile | 1 +
- arch/mips/pci/fixup-lantiq.c | 42 ++++++++++++++++++++++++++++++++++++++++++
- arch/mips/pci/pci-lantiq.c | 24 ++----------------------
- 3 files changed, 45 insertions(+), 22 deletions(-)
- create mode 100644 arch/mips/pci/fixup-lantiq.c
-
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -40,6 +40,7 @@ obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1
- obj-$(CONFIG_SIBYTE_BCM112X) += fixup-sb1250.o pci-sb1250.o
- obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
- obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
-+obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
- obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
- obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
- obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
---- /dev/null
-+++ b/arch/mips/pci/fixup-lantiq.c
-@@ -0,0 +1,42 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/of_irq.h>
-+#include <linux/of_pci.h>
-+
-+int (*ltqpci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin) = NULL;
-+int (*ltqpci_plat_arch_init)(struct pci_dev *dev) = NULL;
-+int (*ltqpci_plat_dev_init)(struct pci_dev *dev) = NULL;
-+int *ltq_pci_irq_map;
-+
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+ if (ltqpci_plat_arch_init)
-+ return ltqpci_plat_arch_init(dev);
-+
-+ if (ltqpci_plat_dev_init)
-+ return ltqpci_plat_dev_init(dev);
-+
-+ return 0;
-+}
-+
-+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (ltqpci_map_irq)
-+ return ltqpci_map_irq(dev, slot, pin);
-+ if (ltq_pci_irq_map[slot]) {
-+ dev_info(&dev->dev, "SLOT:%d PIN:%d IRQ:%d\n", slot, pin, ltq_pci_irq_map[slot]);
-+ return ltq_pci_irq_map[slot];
-+ }
-+ printk(KERN_ERR "lq_pci: trying to map irq for unknown slot %d\n",
-+ slot);
-+
-+ return 0;
-+}
-+
-+
---- a/arch/mips/pci/pci-lantiq.c
-+++ b/arch/mips/pci/pci-lantiq.c
-@@ -93,16 +93,14 @@ static struct ltq_pci_gpio_map ltq_pci_g
- { 37, 2, 0, "pci-req4" },
- };
-
--__iomem void *ltq_pci_mapped_cfg;
-+__iomem void *ltq_pci_cfgbase;
- static __iomem void *ltq_pci_membase;
-
--int (*ltqpci_plat_dev_init)(struct pci_dev *dev) = NULL;
--
- /* Since the PCI REQ pins can be reused for other functionality, make it
- possible to exclude those from interpretation by the PCI controller */
- static int ltq_pci_req_mask = 0xf;
-
--static int *ltq_pci_irq_map;
-+extern int *ltq_pci_irq_map;
-
- struct pci_ops ltq_pci_ops = {
- .read = ltq_pci_read_config_dword,
-@@ -131,14 +129,6 @@ static struct pci_controller ltq_pci_con
- .io_offset = 0x00000000UL,
- };
-
--int pcibios_plat_dev_init(struct pci_dev *dev)
--{
-- if (ltqpci_plat_dev_init)
-- return ltqpci_plat_dev_init(dev);
--
-- return 0;
--}
--
- static u32 ltq_calc_bar11mask(void)
- {
- u32 mem, bar11mask;
-@@ -256,16 +246,6 @@ static int __devinit ltq_pci_startup(str
- return 0;
- }
-
--int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
--{
-- if (ltq_pci_irq_map[slot])
-- return ltq_pci_irq_map[slot];
-- printk(KERN_ERR "lq_pci: trying to map irq for unknown slot %d\n",
-- slot);
--
-- return 0;
--}
--
- static int __devinit ltq_pci_probe(struct platform_device *pdev)
- {
- struct ltq_pci_data *ltq_pci_data =
--- /dev/null
+From ab91bdfb7d8dbeebe4594b96cf81721f97012d24 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 8 Mar 2012 15:57:33 +0100
+Subject: [PATCH 54/73] MIPS: lantiq: pcie: add pcie driver
+
+---
+ arch/mips/Kconfig | 1 +
+ arch/mips/lantiq/Kconfig | 4 -
+ arch/mips/lantiq/xway/Kconfig | 21 +
+ arch/mips/pci/Makefile | 2 +
+ arch/mips/pci/fixup-lantiq-pcie.c | 81 +++
+ arch/mips/pci/pci.c | 25 +
+ arch/mips/pci/pcie-lantiq-msi.c | 399 +++++++++++
+ arch/mips/pci/pcie-lantiq-phy.c | 408 ++++++++++++
+ arch/mips/pci/pcie-lantiq.c | 1146 ++++++++++++++++++++++++++++++++
+ arch/mips/pci/pcie-lantiq.h | 1305 +++++++++++++++++++++++++++++++++++++
+ 10 files changed, 3388 insertions(+), 4 deletions(-)
+ create mode 100644 arch/mips/pci/fixup-lantiq-pcie.c
+ create mode 100644 arch/mips/pci/pcie-lantiq-msi.c
+ create mode 100644 arch/mips/pci/pcie-lantiq-phy.c
+ create mode 100644 arch/mips/pci/pcie-lantiq.c
+ create mode 100644 arch/mips/pci/pcie-lantiq.h
+
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index 1b78cd7..bbaff9b 100644
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -2329,6 +2329,7 @@ config PCI_DOMAINS
+ bool
+
+ source "drivers/pci/Kconfig"
++source "drivers/pci/pcie/Kconfig"
+
+ #
+ # ISA support is now enabled via select. Too many systems still have the one
+diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
+index dde9fc6..d21d9d4 100644
+--- a/arch/mips/lantiq/Kconfig
++++ b/arch/mips/lantiq/Kconfig
+@@ -22,10 +22,6 @@ config SOC_FALCON
+
+ endchoice
+
+-config PCI_LANTIQ
+- bool "PCI Support"
+- depends on SOC_XWAY && PCI
+-
+ source "arch/mips/lantiq/xway/Kconfig"
+ source "arch/mips/lantiq/falcon/Kconfig"
+
+diff --git a/arch/mips/lantiq/xway/Kconfig b/arch/mips/lantiq/xway/Kconfig
+index 2b857de..54a51ff 100644
+--- a/arch/mips/lantiq/xway/Kconfig
++++ b/arch/mips/lantiq/xway/Kconfig
+@@ -8,6 +8,27 @@ config LANTIQ_MACH_EASY50712
+
+ endmenu
+
++choice
++ prompt "PCI"
++ default PCI_LANTIQ_NONE
++
++config PCI_LANTIQ_NONE
++ bool "None"
++
++config PCI_LANTIQ
++ bool "PCI Support"
++ depends on PCI
++
++config PCIE_LANTIQ
++ bool "PCIE Support"
++ select ARCH_SUPPORTS_MSI
++
++endchoice
++
++config PCIE_LANTIQ_MSI
++ bool
++ depends on PCIE_LANTIQ && PCI_MSI
++ default y
+ endif
+
+ if SOC_AMAZON_SE
+diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
+index 3ca5f75..3386888 100644
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -42,6 +42,8 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
+ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
+ obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
+ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
++obj-$(CONFIG_PCIE_LANTIQ) += pcie-lantiq-phy.o pcie-lantiq.o fixup-lantiq-pcie.o
++obj-$(CONFIG_PCIE_LANTIQ_MSI) += pcie-lantiq-msi.o
+ obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
+ obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
+ obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o
+diff --git a/arch/mips/pci/fixup-lantiq-pcie.c b/arch/mips/pci/fixup-lantiq-pcie.c
+new file mode 100644
+index 0000000..84517df
+--- /dev/null
++++ b/arch/mips/pci/fixup-lantiq-pcie.c
+@@ -0,0 +1,81 @@
++/******************************************************************************
++**
++** FILE NAME : ifxmips_fixup_pcie.c
++** PROJECT : IFX UEIP for VRX200
++** MODULES : PCIe
++**
++** DATE : 02 Mar 2009
++** AUTHOR : Lei Chuanhua
++** DESCRIPTION : PCIe Root Complex Driver
++** COPYRIGHT : Copyright (c) 2009
++** Infineon Technologies AG
++** Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++** This program is free software; you can redistribute it and/or modify
++** it under the terms of the GNU General Public License as published by
++** the Free Software Foundation; either version 2 of the License, or
++** (at your option) any later version.
++** HISTORY
++** $Version $Date $Author $Comment
++** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version
++*******************************************************************************/
++/*!
++ \file ifxmips_fixup_pcie.c
++ \ingroup IFX_PCIE
++ \brief PCIe Fixup functions source file
++*/
++#include <linux/pci.h>
++#include <linux/pci_regs.h>
++#include <linux/pci_ids.h>
++
++#include <lantiq_soc.h>
++
++#include "pcie-lantiq.h"
++
++#define PCI_VENDOR_ID_INFINEON 0x15D1
++#define PCI_DEVICE_ID_INFINEON_DANUBE 0x000F
++#define PCI_DEVICE_ID_INFINEON_PCIE 0x0011
++#define PCI_VENDOR_ID_LANTIQ 0x1BEF
++#define PCI_DEVICE_ID_LANTIQ_PCIE 0x0011
++
++
++
++static void __devinit
++ifx_pcie_fixup_resource(struct pci_dev *dev)
++{
++ u32 reg;
++
++ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev));
++
++ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s: fixup host controller %s (%04x:%04x)\n",
++ __func__, pci_name(dev), dev->vendor, dev->device);
++
++ /* Setup COMMAND register */
++ reg = PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER /* |
++ PCI_COMMAND_INTX_DISABLE */| PCI_COMMAND_SERR;
++ pci_write_config_word(dev, PCI_COMMAND, reg);
++ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev));
++}
++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE, ifx_pcie_fixup_resource);
++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_VENDOR_ID_LANTIQ, ifx_pcie_fixup_resource);
++
++static void __devinit
++ifx_pcie_rc_class_early_fixup(struct pci_dev *dev)
++{
++ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev));
++
++ if (dev->devfn == PCI_DEVFN(0, 0) &&
++ (dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) {
++
++ dev->class = (PCI_CLASS_BRIDGE_PCI << 8) | (dev->class & 0xff);
++
++ printk(KERN_INFO "%s: fixed pcie host bridge to pci-pci bridge\n", __func__);
++ }
++ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev));
++}
++
++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE,
++ ifx_pcie_rc_class_early_fixup);
++
++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_DEVICE_ID_LANTIQ_PCIE,
++ ifx_pcie_rc_class_early_fixup);
+diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
+index 41af7fa..2239cda 100644
+--- a/arch/mips/pci/pci.c
++++ b/arch/mips/pci/pci.c
+@@ -167,6 +167,31 @@ static int __init pcibios_init(void)
+
+ subsys_initcall(pcibios_init);
+
++int pcibios_host_nr(void)
++{
++ int count;
++ struct pci_controller *hose;
++ for (count = 0, hose = hose_head; hose; hose = hose->next, count++) {
++ ;
++ }
++ return count;
++}
++EXPORT_SYMBOL(pcibios_host_nr);
++
++int pcibios_1st_host_bus_nr(void)
++{
++ int bus_nr = 0;
++ struct pci_controller *hose = hose_head;
++
++ if (hose != NULL) {
++ if (hose->bus != NULL) {
++ bus_nr = hose->bus->subordinate + 1;
++ }
++ }
++ return bus_nr;
++}
++EXPORT_SYMBOL(pcibios_1st_host_bus_nr);
++
+ static int pcibios_enable_resources(struct pci_dev *dev, int mask)
+ {
+ u16 cmd, old_cmd;
+diff --git a/arch/mips/pci/pcie-lantiq-msi.c b/arch/mips/pci/pcie-lantiq-msi.c
+new file mode 100644
+index 0000000..9cbf639
+--- /dev/null
++++ b/arch/mips/pci/pcie-lantiq-msi.c
+@@ -0,0 +1,399 @@
++/******************************************************************************
++**
++** FILE NAME : ifxmips_pcie_msi.c
++** PROJECT : IFX UEIP for VRX200
++** MODULES : PCI MSI sub module
++**
++** DATE : 02 Mar 2009
++** AUTHOR : Lei Chuanhua
++** DESCRIPTION : PCIe MSI Driver
++** COPYRIGHT : Copyright (c) 2009
++** Infineon Technologies AG
++** Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++** This program is free software; you can redistribute it and/or modify
++** it under the terms of the GNU General Public License as published by
++** the Free Software Foundation; either version 2 of the License, or
++** (at your option) any later version.
++** HISTORY
++** $Date $Author $Comment
++** 02 Mar,2009 Lei Chuanhua Initial version
++*******************************************************************************/
++/*!
++ \defgroup IFX_PCIE_MSI MSI OS APIs
++ \ingroup IFX_PCIE
++ \brief PCIe bus driver OS interface functions
++*/
++
++/*!
++ \file ifxmips_pcie_msi.c
++ \ingroup IFX_PCIE
++ \brief PCIe MSI OS interface file
++*/
++
++#include <linux/init.h>
++#include <linux/sched.h>
++#include <linux/slab.h>
++#include <linux/interrupt.h>
++#include <linux/kernel_stat.h>
++#include <linux/pci.h>
++#include <linux/msi.h>
++#include <linux/module.h>
++#include <asm/bootinfo.h>
++#include <asm/irq.h>
++#include <asm/traps.h>
++
++#include "pcie-lantiq.h"
++
++#define IFX_MSI_IRQ_NUM 16
++#define SM(_v, _f) (((_v) << _f##_S) & (_f))
++
++#define IFX_MSI_PIC_REG_BASE (KSEG1 | 0x1F700000)
++#define IFX_PCIE_MSI_IR0 (INT_NUM_IM4_IRL0 + 27)
++#define IFX_PCIE_MSI_IR1 (INT_NUM_IM4_IRL0 + 28)
++#define IFX_PCIE_MSI_IR2 (INT_NUM_IM4_IRL0 + 29)
++#define IFX_PCIE_MSI_IR3 (INT_NUM_IM0_IRL0 + 30)
++
++#define IFX_MSI_PCI_INT_DISABLE 0x80000000
++#define IFX_MSI_PIC_INT_LINE 0x30000000
++#define IFX_MSI_PIC_MSG_ADDR 0x0FFF0000
++#define IFX_MSI_PIC_MSG_DATA 0x0000FFFF
++#define IFX_MSI_PIC_BIG_ENDIAN 1
++#define IFX_MSI_PIC_INT_LINE_S 28
++#define IFX_MSI_PIC_MSG_ADDR_S 16
++#define IFX_MSI_PIC_MSG_DATA_S 0x0
++
++enum {
++ IFX_PCIE_MSI_IDX0 = 0,
++ IFX_PCIE_MSI_IDX1,
++ IFX_PCIE_MSI_IDX2,
++ IFX_PCIE_MSI_IDX3,
++};
++
++typedef struct ifx_msi_irq_idx {
++ const int irq;
++ const int idx;
++}ifx_msi_irq_idx_t;
++
++struct ifx_msi_pic {
++ volatile u32 pic_table[IFX_MSI_IRQ_NUM];
++ volatile u32 pic_endian; /* 0x40 */
++};
++typedef struct ifx_msi_pic *ifx_msi_pic_t;
++
++typedef struct ifx_msi_irq {
++ const volatile ifx_msi_pic_t msi_pic_p;
++ const u32 msi_phy_base;
++ const ifx_msi_irq_idx_t msi_irq_idx[IFX_MSI_IRQ_NUM];
++ /*
++ * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is
++ * in use.
++ */
++ u16 msi_free_irq_bitmask;
++
++ /*
++ * Each bit in msi_multiple_irq_bitmask tells that the device using
++ * this bit in msi_free_irq_bitmask is also using the next bit. This
++ * is used so we can disable all of the MSI interrupts when a device
++ * uses multiple.
++ */
++ u16 msi_multiple_irq_bitmask;
++}ifx_msi_irq_t;
++
++static ifx_msi_irq_t msi_irqs[IFX_PCIE_CORE_NR] = {
++ {
++ .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI_PIC_REG_BASE,
++ .msi_phy_base = PCIE_MSI_PHY_BASE,
++ .msi_irq_idx = {
++ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
++ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
++ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
++ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
++ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
++ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
++ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
++ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
++ },
++ .msi_free_irq_bitmask = 0,
++ .msi_multiple_irq_bitmask= 0,
++ },
++#ifdef CONFIG_IFX_PCIE_2ND_CORE
++ {
++ .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI1_PIC_REG_BASE,
++ .msi_phy_base = PCIE1_MSI_PHY_BASE,
++ .msi_irq_idx = {
++ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
++ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
++ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
++ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
++ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
++ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
++ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
++ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
++ },
++ .msi_free_irq_bitmask = 0,
++ .msi_multiple_irq_bitmask= 0,
++
++ },
++#endif /* CONFIG_IFX_PCIE_2ND_CORE */
++};
++
++/*
++ * This lock controls updates to msi_free_irq_bitmask,
++ * msi_multiple_irq_bitmask and pic register settting
++ */
++static DEFINE_SPINLOCK(ifx_pcie_msi_lock);
++
++void pcie_msi_pic_init(int pcie_port)
++{
++ spin_lock(&ifx_pcie_msi_lock);
++ msi_irqs[pcie_port].msi_pic_p->pic_endian = IFX_MSI_PIC_BIG_ENDIAN;
++ spin_unlock(&ifx_pcie_msi_lock);
++}
++
++/**
++ * \fn int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
++ * \brief Called when a driver request MSI interrupts instead of the
++ * legacy INT A-D. This routine will allocate multiple interrupts
++ * for MSI devices that support them. A device can override this by
++ * programming the MSI control bits [6:4] before calling
++ * pci_enable_msi().
++ *
++ * \param[in] pdev Device requesting MSI interrupts
++ * \param[in] desc MSI descriptor
++ *
++ * \return -EINVAL Invalid pcie root port or invalid msi bit
++ * \return 0 OK
++ * \ingroup IFX_PCIE_MSI
++ */
++int
++arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
++{
++ int irq, pos;
++ u16 control;
++ int irq_idx;
++ int irq_step;
++ int configured_private_bits;
++ int request_private_bits;
++ struct msi_msg msg;
++ u16 search_mask;
++ struct ifx_pci_controller *ctrl = pdev->bus->sysdata;
++ int pcie_port = ctrl->port;
++
++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s %s enter\n", __func__, pci_name(pdev));
++
++ /* XXX, skip RC MSI itself */
++ if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) {
++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s RC itself doesn't use MSI interrupt\n", __func__);
++ return -EINVAL;
++ }
++
++ /*
++ * Read the MSI config to figure out how many IRQs this device
++ * wants. Most devices only want 1, which will give
++ * configured_private_bits and request_private_bits equal 0.
++ */
++ pci_read_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, &control);
++
++ /*
++ * If the number of private bits has been configured then use
++ * that value instead of the requested number. This gives the
++ * driver the chance to override the number of interrupts
++ * before calling pci_enable_msi().
++ */
++ configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4;
++ if (configured_private_bits == 0) {
++ /* Nothing is configured, so use the hardware requested size */
++ request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1;
++ }
++ else {
++ /*
++ * Use the number of configured bits, assuming the
++ * driver wanted to override the hardware request
++ * value.
++ */
++ request_private_bits = configured_private_bits;
++ }
++
++ /*
++ * The PCI 2.3 spec mandates that there are at most 32
++ * interrupts. If this device asks for more, only give it one.
++ */
++ if (request_private_bits > 5) {
++ request_private_bits = 0;
++ }
++again:
++ /*
++ * The IRQs have to be aligned on a power of two based on the
++ * number being requested.
++ */
++ irq_step = (1 << request_private_bits);
++
++ /* Mask with one bit for each IRQ */
++ search_mask = (1 << irq_step) - 1;
++
++ /*
++ * We're going to search msi_free_irq_bitmask_lock for zero
++ * bits. This represents an MSI interrupt number that isn't in
++ * use.
++ */
++ spin_lock(&ifx_pcie_msi_lock);
++ for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos += irq_step) {
++ if ((msi_irqs[pcie_port].msi_free_irq_bitmask & (search_mask << pos)) == 0) {
++ msi_irqs[pcie_port].msi_free_irq_bitmask |= search_mask << pos;
++ msi_irqs[pcie_port].msi_multiple_irq_bitmask |= (search_mask >> 1) << pos;
++ break;
++ }
++ }
++ spin_unlock(&ifx_pcie_msi_lock);
++
++ /* Make sure the search for available interrupts didn't fail */
++ if (pos >= IFX_MSI_IRQ_NUM) {
++ if (request_private_bits) {
++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s: Unable to find %d free "
++ "interrupts, trying just one", __func__, 1 << request_private_bits);
++ request_private_bits = 0;
++ goto again;
++ }
++ else {
++ printk(KERN_ERR "%s: Unable to find a free MSI interrupt\n", __func__);
++ return -EINVAL;
++ }
++ }
++ irq = msi_irqs[pcie_port].msi_irq_idx[pos].irq;
++ irq_idx = msi_irqs[pcie_port].msi_irq_idx[pos].idx;
++
++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "pos %d, irq %d irq_idx %d\n", pos, irq, irq_idx);
++
++ /*
++ * Initialize MSI. This has to match the memory-write endianess from the device
++ * Address bits [23:12]
++ */
++ spin_lock(&ifx_pcie_msi_lock);
++ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] = SM(irq_idx, IFX_MSI_PIC_INT_LINE) |
++ SM((msi_irqs[pcie_port].msi_phy_base >> 12), IFX_MSI_PIC_MSG_ADDR) |
++ SM((1 << pos), IFX_MSI_PIC_MSG_DATA);
++
++ /* Enable this entry */
++ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~IFX_MSI_PCI_INT_DISABLE;
++ spin_unlock(&ifx_pcie_msi_lock);
++
++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "pic_table[%d]: 0x%08x\n",
++ pos, msi_irqs[pcie_port].msi_pic_p->pic_table[pos]);
++
++ /* Update the number of IRQs the device has available to it */
++ control &= ~PCI_MSI_FLAGS_QSIZE;
++ control |= (request_private_bits << 4);
++ pci_write_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, control);
++
++ irq_set_msi_desc(irq, desc);
++ msg.address_hi = 0x0;
++ msg.address_lo = msi_irqs[pcie_port].msi_phy_base;
++ msg.data = SM((1 << pos), IFX_MSI_PIC_MSG_DATA);
++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "msi_data: pos %d 0x%08x\n", pos, msg.data);
++
++ write_msi_msg(irq, &msg);
++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__);
++ return 0;
++}
++
++static int
++pcie_msi_irq_to_port(unsigned int irq, int *port)
++{
++ int ret = 0;
++
++ if (irq == IFX_PCIE_MSI_IR0 || irq == IFX_PCIE_MSI_IR1 ||
++ irq == IFX_PCIE_MSI_IR2 || irq == IFX_PCIE_MSI_IR3) {
++ *port = IFX_PCIE_PORT0;
++ }
++#ifdef CONFIG_IFX_PCIE_2ND_CORE
++ else if (irq == IFX_PCIE1_MSI_IR0 || irq == IFX_PCIE1_MSI_IR1 ||
++ irq == IFX_PCIE1_MSI_IR2 || irq == IFX_PCIE1_MSI_IR3) {
++ *port = IFX_PCIE_PORT1;
++ }
++#endif /* CONFIG_IFX_PCIE_2ND_CORE */
++ else {
++ printk(KERN_ERR "%s: Attempted to teardown illegal "
++ "MSI interrupt (%d)\n", __func__, irq);
++ ret = -EINVAL;
++ }
++ return ret;
++}
++
++/**
++ * \fn void arch_teardown_msi_irq(unsigned int irq)
++ * \brief Called when a device no longer needs its MSI interrupts. All
++ * MSI interrupts for the device are freed.
++ *
++ * \param irq The devices first irq number. There may be multple in sequence.
++ * \return none
++ * \ingroup IFX_PCIE_MSI
++ */
++void
++arch_teardown_msi_irq(unsigned int irq)
++{
++ int pos;
++ int number_irqs;
++ u16 bitmask;
++ int pcie_port;
++
++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s enter\n", __func__);
++
++ BUG_ON(irq > (INT_NUM_IM4_IRL0 + 31));
++
++ if (pcie_msi_irq_to_port(irq, &pcie_port) != 0) {
++ return;
++ }
++
++ /* Shift the mask to the correct bit location, not always correct
++ * Probally, the first match will be chosen.
++ */
++ for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos++) {
++ if ((msi_irqs[pcie_port].msi_irq_idx[pos].irq == irq)
++ && (msi_irqs[pcie_port].msi_free_irq_bitmask & ( 1 << pos))) {
++ break;
++ }
++ }
++ if (pos >= IFX_MSI_IRQ_NUM) {
++ printk(KERN_ERR "%s: Unable to find a matched MSI interrupt\n", __func__);
++ return;
++ }
++ spin_lock(&ifx_pcie_msi_lock);
++ /* Disable this entry */
++ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] |= IFX_MSI_PCI_INT_DISABLE;
++ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~(IFX_MSI_PIC_INT_LINE | IFX_MSI_PIC_MSG_ADDR | IFX_MSI_PIC_MSG_DATA);
++ spin_unlock(&ifx_pcie_msi_lock);
++ /*
++ * Count the number of IRQs we need to free by looking at the
++ * msi_multiple_irq_bitmask. Each bit set means that the next
++ * IRQ is also owned by this device.
++ */
++ number_irqs = 0;
++ while (((pos + number_irqs) < IFX_MSI_IRQ_NUM) &&
++ (msi_irqs[pcie_port].msi_multiple_irq_bitmask & (1 << (pos + number_irqs)))) {
++ number_irqs++;
++ }
++ number_irqs++;
++
++ /* Mask with one bit for each IRQ */
++ bitmask = (1 << number_irqs) - 1;
++
++ bitmask <<= pos;
++ if ((msi_irqs[pcie_port].msi_free_irq_bitmask & bitmask) != bitmask) {
++ printk(KERN_ERR "%s: Attempted to teardown MSI "
++ "interrupt (%d) not in use\n", __func__, irq);
++ return;
++ }
++ /* Checks are done, update the in use bitmask */
++ spin_lock(&ifx_pcie_msi_lock);
++ msi_irqs[pcie_port].msi_free_irq_bitmask &= ~bitmask;
++ msi_irqs[pcie_port].msi_multiple_irq_bitmask &= ~(bitmask >> 1);
++ spin_unlock(&ifx_pcie_msi_lock);
++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__);
++}
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Chuanhua.Lei@infineon.com");
++MODULE_SUPPORTED_DEVICE("Infineon PCIe IP builtin MSI PIC module");
++MODULE_DESCRIPTION("Infineon PCIe IP builtin MSI PIC driver");
++
+diff --git a/arch/mips/pci/pcie-lantiq-phy.c b/arch/mips/pci/pcie-lantiq-phy.c
+new file mode 100644
+index 0000000..9f5027d
+--- /dev/null
++++ b/arch/mips/pci/pcie-lantiq-phy.c
+@@ -0,0 +1,408 @@
++/******************************************************************************
++**
++** FILE NAME : ifxmips_pcie_phy.c
++** PROJECT : IFX UEIP for VRX200
++** MODULES : PCIe PHY sub module
++**
++** DATE : 14 May 2009
++** AUTHOR : Lei Chuanhua
++** DESCRIPTION : PCIe Root Complex Driver
++** COPYRIGHT : Copyright (c) 2009
++** Infineon Technologies AG
++** Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++** This program is free software; you can redistribute it and/or modify
++** it under the terms of the GNU General Public License as published by
++** the Free Software Foundation; either version 2 of the License, or
++** (at your option) any later version.
++** HISTORY
++** $Version $Date $Author $Comment
++** 0.0.1 14 May,2009 Lei Chuanhua Initial version
++*******************************************************************************/
++/*!
++ \file ifxmips_pcie_phy.c
++ \ingroup IFX_PCIE
++ \brief PCIe PHY PLL register programming source file
++*/
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <asm/paccess.h>
++#include <linux/delay.h>
++
++#include "pcie-lantiq.h"
++
++/* PCIe PDI only supports 16 bit operation */
++
++#define IFX_PCIE_PHY_REG_WRITE16(__addr, __data) \
++ ((*(volatile u16 *) (__addr)) = (__data))
++
++#define IFX_PCIE_PHY_REG_READ16(__addr) \
++ (*(volatile u16 *) (__addr))
++
++#define IFX_PCIE_PHY_REG16(__addr) \
++ (*(volatile u16 *) (__addr))
++
++#define IFX_PCIE_PHY_REG(__reg, __value, __mask) do { \
++ u16 read_data; \
++ u16 write_data; \
++ read_data = IFX_PCIE_PHY_REG_READ16((__reg)); \
++ write_data = (read_data & ((u16)~(__mask))) | (((u16)(__value)) & ((u16)(__mask)));\
++ IFX_PCIE_PHY_REG_WRITE16((__reg), write_data); \
++} while (0)
++
++#define IFX_PCIE_PLL_TIMEOUT 1000 /* Tunnable */
++
++static void
++pcie_phy_comm_setup(int pcie_port)
++{
++ /* PLL Setting */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF);
++
++ /* increase the bias reference voltage */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF);
++
++ /* Endcnt */
++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF);
++
++ /* force */
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008);
++
++ /* predrv_ser_en */
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF);
++
++ /* ctrl_lim */
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF);
++
++ /* ctrl */
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00);
++
++ /* predrv_ser_en */
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00);
++
++ /* RTERM*/
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF);
++
++ /* Improved 100MHz clock output */
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF);
++
++ /* Reduced CDR BW to avoid glitches */
++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF);
++}
++
++#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE
++static void
++pcie_phy_36mhz_mode_setup(int pcie_port)
++{
++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
++
++ /* en_ext_mmd_div_ratio */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
++
++ /* ext_mmd_div_ratio*/
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
++
++ /* pll_ensdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
++
++ /* en_const_sdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
++
++ /* mmd */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
++
++ /* lf_mode */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
++
++ /* const_sdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
++
++ /* const sdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
++
++ /* pllmod */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF);
++
++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
++}
++#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */
++
++#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE
++static void
++pcie_phy_36mhz_ssc_mode_setup(int pcie_port)
++{
++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
++
++ /* PLL Setting */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF);
++
++ /* Increase the bias reference voltage */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF);
++
++ /* Endcnt */
++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF);
++
++ /* Force */
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008);
++
++ /* Predrv_ser_en */
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF);
++
++ /* ctrl_lim */
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF);
++
++ /* ctrl */
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00);
++
++ /* predrv_ser_en */
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00);
++
++ /* RTERM*/
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF);
++
++ /* en_ext_mmd_div_ratio */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
++
++ /* ext_mmd_div_ratio*/
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
++
++ /* pll_ensdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0400, 0x0400);
++
++ /* en_const_sdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
++
++ /* mmd */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
++
++ /* lf_mode */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
++
++ /* const_sdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
++
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0100);
++ /* const sdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
++
++ /* pllmod */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1c72, 0xFFFF);
++
++ /* improved 100MHz clock output */
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF);
++
++ /* reduced CDR BW to avoid glitches */
++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF);
++
++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
++}
++#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE */
++
++#ifdef CONFIG_IFX_PCIE_PHY_25MHZ_MODE
++static void
++pcie_phy_25mhz_mode_setup(int pcie_port)
++{
++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
++ /* en_const_sdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
++
++ /* pll_ensdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0200);
++
++ /* en_ext_mmd_div_ratio*/
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0002, 0x0002);
++
++ /* ext_mmd_div_ratio*/
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0040, 0x0070);
++
++ /* mmd */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x6000, 0xe000);
++
++ /* lf_mode */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x4000, 0x4000);
++
++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
++}
++#endif /* CONFIG_IFX_PCIE_PHY_25MHZ_MODE */
++
++#ifdef CONFIG_IFX_PCIE_PHY_100MHZ_MODE
++static void
++pcie_phy_100mhz_mode_setup(int pcie_port)
++{
++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
++ /* en_ext_mmd_div_ratio */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
++
++ /* ext_mmd_div_ratio*/
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
++
++ /* pll_ensdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
++
++ /* en_const_sdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
++
++ /* mmd */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
++
++ /* lf_mode */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
++
++ /* const_sdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
++
++ /* const sdm */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
++
++ /* pllmod */
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF);
++
++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
++}
++#endif /* CONFIG_IFX_PCIE_PHY_100MHZ_MODE */
++
++static int
++pcie_phy_wait_startup_ready(int pcie_port)
++{
++ int i;
++
++ for (i = 0; i < IFX_PCIE_PLL_TIMEOUT; i++) {
++ if ((IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port)) & 0x0040) != 0) {
++ break;
++ }
++ udelay(10);
++ }
++ if (i >= IFX_PCIE_PLL_TIMEOUT) {
++ printk(KERN_ERR "%s PLL Link timeout\n", __func__);
++ return -1;
++ }
++ return 0;
++}
++
++static void
++pcie_phy_load_enable(int pcie_port, int slice)
++{
++ /* Set the load_en of tx/rx slice to '1' */
++ switch (slice) {
++ case 1:
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0010, 0x0010);
++ break;
++ case 2:
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0010, 0x0010);
++ break;
++ case 3:
++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0002, 0x0002);
++ break;
++ }
++}
++
++static void
++pcie_phy_load_disable(int pcie_port, int slice)
++{
++ /* set the load_en of tx/rx slice to '0' */
++ switch (slice) {
++ case 1:
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0000, 0x0010);
++ break;
++ case 2:
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0000, 0x0010);
++ break;
++ case 3:
++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0000, 0x0002);
++ break;
++ }
++}
++
++static void pcie_phy_load_war(int pcie_port)
++{
++ int slice;
++
++ for (slice = 1; slice < 4; slice++) {
++ pcie_phy_load_enable(pcie_port, slice);
++ udelay(1);
++ pcie_phy_load_disable(pcie_port, slice);
++ }
++}
++
++static void pcie_phy_tx2_modulation(int pcie_port)
++{
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD1(pcie_port), 0x1FFE, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD2(pcie_port), 0xFFFE, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0601, 0xFFFF);
++ mdelay(1);
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0001, 0xFFFF);
++}
++
++static void pcie_phy_tx1_modulation(int pcie_port)
++{
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD1(pcie_port), 0x1FFE, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD2(pcie_port), 0xFFFE, 0xFFFF);
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0601, 0xFFFF);
++ mdelay(1);
++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0001, 0xFFFF);
++}
++
++static void pcie_phy_tx_modulation_war(int pcie_port)
++{
++ int i;
++#define PCIE_PHY_MODULATION_NUM 5
++ for (i = 0; i < PCIE_PHY_MODULATION_NUM; i++) {
++ pcie_phy_tx2_modulation(pcie_port);
++ pcie_phy_tx1_modulation(pcie_port);
++ }
++#undef PCIE_PHY_MODULATION_NUM
++}
++
++void pcie_phy_clock_mode_setup(int pcie_port)
++{
++ pcie_pdi_big_endian(pcie_port);
++
++ /* Enable PDI to access PCIe PHY register */
++ pcie_pdi_pmu_enable(pcie_port);
++
++ /* Configure PLL and PHY clock */
++ pcie_phy_comm_setup(pcie_port);
++
++#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE
++ pcie_phy_36mhz_mode_setup(pcie_port);
++#elif defined(CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE)
++ pcie_phy_36mhz_ssc_mode_setup(pcie_port);
++#elif defined(CONFIG_IFX_PCIE_PHY_25MHZ_MODE)
++ pcie_phy_25mhz_mode_setup(pcie_port);
++#elif defined (CONFIG_IFX_PCIE_PHY_100MHZ_MODE)
++ pcie_phy_100mhz_mode_setup(pcie_port);
++#else
++ #error "PCIE PHY Clock Mode must be chosen first!!!!"
++#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */
++
++ /* Enable PCIe PHY and make PLL setting take effect */
++ pcie_phy_pmu_enable(pcie_port);
++
++ /* Check if we are in startup_ready status */
++ pcie_phy_wait_startup_ready(pcie_port);
++
++ pcie_phy_load_war(pcie_port);
++
++ /* Apply TX modulation workarounds */
++ pcie_phy_tx_modulation_war(pcie_port);
++
++#ifdef IFX_PCI_PHY_REG_DUMP
++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Modified PHY register dump\n");
++ pcie_phy_reg_dump(pcie_port);
++#endif
++}
++
+diff --git a/arch/mips/pci/pcie-lantiq.c b/arch/mips/pci/pcie-lantiq.c
+new file mode 100644
+index 0000000..1df55b5
+--- /dev/null
++++ b/arch/mips/pci/pcie-lantiq.c
+@@ -0,0 +1,1146 @@
++#include <linux/types.h>
++#include <linux/module.h>
++#include <linux/pci.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/mm.h>
++#include <asm/paccess.h>
++#include <linux/pci.h>
++#include <linux/pci_regs.h>
++#include <linux/platform_device.h>
++
++#define CONFIG_IFX_PCIE_1ST_CORE
++
++#include "pcie-lantiq.h"
++
++#define IFX_PCIE_IR (INT_NUM_IM4_IRL0 + 25)
++#define IFX_PCIE_INTA (INT_NUM_IM4_IRL0 + 8)
++#define IFX_PCIE_INTB (INT_NUM_IM4_IRL0 + 9)
++#define IFX_PCIE_INTC (INT_NUM_IM4_IRL0 + 10)
++#define IFX_PCIE_INTD (INT_NUM_IM4_IRL0 + 11)
++#define MS(_v, _f) (((_v) & (_f)) >> _f##_S)
++#define SM(_v, _f) (((_v) << _f##_S) & (_f))
++#define IFX_REG_SET_BIT(_f, _r) \
++ IFX_REG_W32((IFX_REG_R32((_r)) &~ (_f)) | (_f), (_r))
++#define IFX_PCIE_LTSSM_ENABLE_TIMEOUT 10
++#define IFX_PCIE_PHY_LINK_UP_TIMEOUT 1000
++#define IFX_PCIE_PHY_LOOP_CNT 5
++
++static DEFINE_SPINLOCK(ifx_pcie_lock);
++
++int pcibios_1st_host_bus_nr(void);
++
++unsigned int g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG);
++
++static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = {
++ {
++ .ir_irq = {
++ .irq = IFX_PCIE_IR,
++ .name = "ifx_pcie_rc0",
++ },
++
++ .legacy_irq = {
++ {
++ .irq_bit = PCIE_IRN_INTA,
++ .irq = IFX_PCIE_INTA,
++ },
++ {
++ .irq_bit = PCIE_IRN_INTB,
++ .irq = IFX_PCIE_INTB,
++ },
++ {
++ .irq_bit = PCIE_IRN_INTC,
++ .irq = IFX_PCIE_INTC,
++ },
++ {
++ .irq_bit = PCIE_IRN_INTD,
++ .irq = IFX_PCIE_INTD,
++ },
++ },
++ },
++};
++
++static inline int pcie_ltssm_enable(int pcie_port)
++{
++ int i;
++
++ IFX_REG_W32(PCIE_RC_CCR_LTSSM_ENABLE, PCIE_RC_CCR(pcie_port)); /* Enable LTSSM */
++
++ /* Wait for the link to come up */
++ for (i = 0; i < IFX_PCIE_LTSSM_ENABLE_TIMEOUT; i++) {
++ if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_RETRAIN_PENDING)) {
++ break;
++ }
++ udelay(10);
++ }
++ if (i >= IFX_PCIE_LTSSM_ENABLE_TIMEOUT) {
++ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s link timeout!!!!!\n", __func__);
++ return -1;
++ }
++ return 0;
++}
++
++static inline void pcie_status_register_clear(int pcie_port)
++{
++ IFX_REG_W32(0, PCIE_RC_DR(pcie_port));
++ IFX_REG_W32(0, PCIE_PCICMDSTS(pcie_port));
++ IFX_REG_W32(0, PCIE_DCTLSTS(pcie_port));
++ IFX_REG_W32(0, PCIE_LCTLSTS(pcie_port));
++ IFX_REG_W32(0, PCIE_SLCTLSTS(pcie_port));
++ IFX_REG_W32(0, PCIE_RSTS(pcie_port));
++ IFX_REG_W32(0, PCIE_UES_R(pcie_port));
++ IFX_REG_W32(0, PCIE_UEMR(pcie_port));
++ IFX_REG_W32(0, PCIE_UESR(pcie_port));
++ IFX_REG_W32(0, PCIE_CESR(pcie_port));
++ IFX_REG_W32(0, PCIE_CEMR(pcie_port));
++ IFX_REG_W32(0, PCIE_RESR(pcie_port));
++ IFX_REG_W32(0, PCIE_PVCCRSR(pcie_port));
++ IFX_REG_W32(0, PCIE_VC0_RSR0(pcie_port));
++ IFX_REG_W32(0, PCIE_TPFCS(pcie_port));
++ IFX_REG_W32(0, PCIE_TNPFCS(pcie_port));
++ IFX_REG_W32(0, PCIE_TCFCS(pcie_port));
++ IFX_REG_W32(0, PCIE_QSR(pcie_port));
++ IFX_REG_W32(0, PCIE_IOBLSECS(pcie_port));
++}
++
++static inline int ifx_pcie_link_up(int pcie_port)
++{
++ return (IFX_REG_R32(PCIE_PHY_SR(pcie_port)) & PCIE_PHY_SR_PHY_LINK_UP) ? 1 : 0;
++}
++
++static inline void pcie_mem_io_setup(int pcie_port)
++{
++ unsigned int reg;
++ /*
++ * BAR[0:1] readonly register
++ * RC contains only minimal BARs for packets mapped to this device
++ * Mem/IO filters defines a range of memory occupied by memory mapped IO devices that
++ * reside on the downstream side fo the bridge.
++ */
++ reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_MBML_MEM_LIMIT_ADDR)
++ | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_MBML_MEM_BASE_ADDR);
++ IFX_REG_W32(reg, PCIE_MBML(pcie_port));
++
++ /* PCIe_PBML, same as MBML */
++ IFX_REG_W32(IFX_REG_R32(PCIE_MBML(pcie_port)), PCIE_PMBL(pcie_port));
++
++ /* IO Address Range */
++ reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 12), PCIE_IOBLSECS_IO_LIMIT_ADDR)
++ | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 12), PCIE_IOBLSECS_IO_BASE_ADDR);
++ reg |= PCIE_IOBLSECS_32BIT_IO_ADDR;
++ IFX_REG_W32(reg, PCIE_IOBLSECS(pcie_port));
++
++ reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT)
++ | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_BASE);
++ IFX_REG_W32(reg, PCIE_IO_BANDL(pcie_port));
++}
++
++static inline void pcie_msi_setup(int pcie_port)
++{
++ unsigned int reg;
++
++ /* XXX, MSI stuff should only apply to EP */
++ /* MSI Capability: Only enable 32-bit addresses */
++ reg = IFX_REG_R32(PCIE_MCAPR(pcie_port));
++ reg &= ~PCIE_MCAPR_ADDR64_CAP;
++ reg |= PCIE_MCAPR_MSI_ENABLE;
++
++ /* Disable multiple message */
++ reg &= ~(PCIE_MCAPR_MULTI_MSG_CAP | PCIE_MCAPR_MULTI_MSG_ENABLE);
++ IFX_REG_W32(reg, PCIE_MCAPR(pcie_port));
++}
++
++static inline void pcie_pm_setup(int pcie_port)
++{
++ unsigned int reg;
++
++ /* Enable PME, Soft reset enabled */
++ reg = IFX_REG_R32(PCIE_PM_CSR(pcie_port));
++ reg |= PCIE_PM_CSR_PME_ENABLE | PCIE_PM_CSR_SW_RST;
++ IFX_REG_W32(reg, PCIE_PM_CSR(pcie_port));
++}
++
++static inline void pcie_bus_setup(int pcie_port)
++{
++ unsigned int reg;
++
++ reg = SM(0, PCIE_BNR_PRIMARY_BUS_NUM) | SM(1, PCIE_PNR_SECONDARY_BUS_NUM) | SM(0xFF, PCIE_PNR_SUB_BUS_NUM);
++ IFX_REG_W32(reg, PCIE_BNR(pcie_port));
++}
++
++static inline void pcie_device_setup(int pcie_port)
++{
++ unsigned int reg;
++
++ /* Device capability register, set up Maximum payload size */
++ reg = IFX_REG_R32(PCIE_DCAP(pcie_port));
++ reg |= PCIE_DCAP_ROLE_BASE_ERR_REPORT;
++ reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCAP_MAX_PAYLOAD_SIZE);
++
++ /* Only available for EP */
++ reg &= ~(PCIE_DCAP_EP_L0S_LATENCY | PCIE_DCAP_EP_L1_LATENCY);
++ IFX_REG_W32(reg, PCIE_DCAP(pcie_port));
++
++ /* Device control and status register */
++ /* Set Maximum Read Request size for the device as a Requestor */
++ reg = IFX_REG_R32(PCIE_DCTLSTS(pcie_port));
++
++ /*
++ * Request size can be larger than the MPS used, but the completions returned
++ * for the read will be bounded by the MPS size.
++ * In our system, Max request size depends on AHB burst size. It is 64 bytes.
++ * but we set it as 128 as minimum one.
++ */
++ reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_READ_SIZE)
++ | SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_PAYLOAD_SIZE);
++
++ /* Enable relaxed ordering, no snoop, and all kinds of errors */
++ reg |= PCIE_DCTLSTS_RELAXED_ORDERING_EN | PCIE_DCTLSTS_ERR_EN | PCIE_DCTLSTS_NO_SNOOP_EN;
++
++ IFX_REG_W32(reg, PCIE_DCTLSTS(pcie_port));
++}
++
++static inline void pcie_link_setup(int pcie_port)
++{
++ unsigned int reg;
++
++ /*
++ * XXX, Link capability register, bit 18 for EP CLKREQ# dynamic clock management for L1, L2/3 CPM
++ * L0s is reported during link training via TS1 order set by N_FTS
++ */
++ reg = IFX_REG_R32(PCIE_LCAP(pcie_port));
++ reg &= ~PCIE_LCAP_L0S_EIXT_LATENCY;
++ reg |= SM(3, PCIE_LCAP_L0S_EIXT_LATENCY);
++ IFX_REG_W32(reg, PCIE_LCAP(pcie_port));
++
++ /* Link control and status register */
++ reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port));
++
++ /* Link Enable, ASPM enabled */
++ reg &= ~PCIE_LCTLSTS_LINK_DISABLE;
++
++#ifdef CONFIG_PCIEASPM
++ /*
++ * We use the same physical reference clock that the platform provides on the connector
++ * It paved the way for ASPM to calculate the new exit Latency
++ */
++ reg |= PCIE_LCTLSTS_SLOT_CLK_CFG;
++ reg |= PCIE_LCTLSTS_COM_CLK_CFG;
++ /*
++ * We should disable ASPM by default except that we have dedicated power management support
++ * Enable ASPM will cause the system hangup/instability, performance degration
++ */
++ reg |= PCIE_LCTLSTS_ASPM_ENABLE;
++#else
++ reg &= ~PCIE_LCTLSTS_ASPM_ENABLE;
++#endif /* CONFIG_PCIEASPM */
++
++ /*
++ * The maximum size of any completion with data packet is bounded by the MPS setting
++ * in device control register
++ */
++ /* RCB may cause multiple split transactions, two options available, we use 64 byte RCB */
++ reg &= ~ PCIE_LCTLSTS_RCB128;
++ IFX_REG_W32(reg, PCIE_LCTLSTS(pcie_port));
++}
++
++static inline void pcie_error_setup(int pcie_port)
++{
++ unsigned int reg;
++
++ /*
++ * Forward ERR_COR, ERR_NONFATAL, ERR_FATAL to the backbone
++ * Poisoned write TLPs and completions indicating poisoned TLPs will set the PCIe_PCICMDSTS.MDPE
++ */
++ reg = IFX_REG_R32(PCIE_INTRBCTRL(pcie_port));
++ reg |= PCIE_INTRBCTRL_SERR_ENABLE | PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE;
++
++ IFX_REG_W32(reg, PCIE_INTRBCTRL(pcie_port));
++
++ /* Uncorrectable Error Mask Register, Unmask <enable> all bits in PCIE_UESR */
++ reg = IFX_REG_R32(PCIE_UEMR(pcie_port));
++ reg &= ~PCIE_ALL_UNCORRECTABLE_ERR;
++ IFX_REG_W32(reg, PCIE_UEMR(pcie_port));
++
++ /* Uncorrectable Error Severity Register, ALL errors are FATAL */
++ IFX_REG_W32(PCIE_ALL_UNCORRECTABLE_ERR, PCIE_UESR(pcie_port));
++
++ /* Correctable Error Mask Register, unmask <enable> all bits */
++ reg = IFX_REG_R32(PCIE_CEMR(pcie_port));
++ reg &= ~PCIE_CORRECTABLE_ERR;
++ IFX_REG_W32(reg, PCIE_CEMR(pcie_port));
++
++ /* Advanced Error Capabilities and Control Registr */
++ reg = IFX_REG_R32(PCIE_AECCR(pcie_port));
++ reg |= PCIE_AECCR_ECRC_CHECK_EN | PCIE_AECCR_ECRC_GEN_EN;
++ IFX_REG_W32(reg, PCIE_AECCR(pcie_port));
++
++ /* Root Error Command Register, Report all types of errors */
++ reg = IFX_REG_R32(PCIE_RECR(pcie_port));
++ reg |= PCIE_RECR_ERR_REPORT_EN;
++ IFX_REG_W32(reg, PCIE_RECR(pcie_port));
++
++ /* Clear the Root status register */
++ reg = IFX_REG_R32(PCIE_RESR(pcie_port));
++ IFX_REG_W32(reg, PCIE_RESR(pcie_port));
++}
++
++static inline void pcie_root_setup(int pcie_port)
++{
++ unsigned int reg;
++
++ /* Root control and capabilities register */
++ reg = IFX_REG_R32(PCIE_RCTLCAP(pcie_port));
++ reg |= PCIE_RCTLCAP_SERR_ENABLE | PCIE_RCTLCAP_PME_INT_EN;
++ IFX_REG_W32(reg, PCIE_RCTLCAP(pcie_port));
++}
++
++static inline void pcie_vc_setup(int pcie_port)
++{
++ unsigned int reg;
++
++ /* Port VC Capability Register 2 */
++ reg = IFX_REG_R32(PCIE_PVC2(pcie_port));
++ reg &= ~PCIE_PVC2_VC_ARB_WRR;
++ reg |= PCIE_PVC2_VC_ARB_16P_FIXED_WRR;
++ IFX_REG_W32(reg, PCIE_PVC2(pcie_port));
++
++ /* VC0 Resource Capability Register */
++ reg = IFX_REG_R32(PCIE_VC0_RC(pcie_port));
++ reg &= ~PCIE_VC0_RC_REJECT_SNOOP;
++ IFX_REG_W32(reg, PCIE_VC0_RC(pcie_port));
++}
++
++static inline void pcie_port_logic_setup(int pcie_port)
++{
++ unsigned int reg;
++
++ /* FTS number, default 12, increase to 63, may increase time from/to L0s to L0 */
++ reg = IFX_REG_R32(PCIE_AFR(pcie_port));
++ reg &= ~(PCIE_AFR_FTS_NUM | PCIE_AFR_COM_FTS_NUM);
++ reg |= SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_FTS_NUM)
++ | SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_COM_FTS_NUM);
++ /* L0s and L1 entry latency */
++ reg &= ~(PCIE_AFR_L0S_ENTRY_LATENCY | PCIE_AFR_L1_ENTRY_LATENCY);
++ reg |= SM(PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L0S_ENTRY_LATENCY)
++ | SM(PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L1_ENTRY_LATENCY);
++ IFX_REG_W32(reg, PCIE_AFR(pcie_port));
++
++ /* Port Link Control Register */
++ reg = IFX_REG_R32(PCIE_PLCR(pcie_port));
++ reg |= PCIE_PLCR_DLL_LINK_EN; /* Enable the DLL link */
++ IFX_REG_W32(reg, PCIE_PLCR(pcie_port));
++
++ /* Lane Skew Register */
++ reg = IFX_REG_R32(PCIE_LSR(pcie_port));
++ /* Enable ACK/NACK and FC */
++ reg &= ~(PCIE_LSR_ACKNAK_DISABLE | PCIE_LSR_FC_DISABLE);
++ IFX_REG_W32(reg, PCIE_LSR(pcie_port));
++
++ /* Symbol Timer Register and Filter Mask Register 1 */
++ reg = IFX_REG_R32(PCIE_STRFMR(pcie_port));
++
++ /* Default SKP interval is very accurate already, 5us */
++ /* Enable IO/CFG transaction */
++ reg |= PCIE_STRFMR_RX_CFG_TRANS_ENABLE | PCIE_STRFMR_RX_IO_TRANS_ENABLE;
++ /* Disable FC WDT */
++ reg &= ~PCIE_STRFMR_FC_WDT_DISABLE;
++ IFX_REG_W32(reg, PCIE_STRFMR(pcie_port));
++
++ /* Filter Masker Register 2 */
++ reg = IFX_REG_R32(PCIE_FMR2(pcie_port));
++ reg |= PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 | PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1;
++ IFX_REG_W32(reg, PCIE_FMR2(pcie_port));
++
++ /* VC0 Completion Receive Queue Control Register */
++ reg = IFX_REG_R32(PCIE_VC0_CRQCR(pcie_port));
++ reg &= ~PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE;
++ reg |= SM(PCIE_VC0_TLP_QUEUE_MODE_BYPASS, PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE);
++ IFX_REG_W32(reg, PCIE_VC0_CRQCR(pcie_port));
++}
++
++static inline void pcie_rc_cfg_reg_setup(int pcie_port)
++{
++ /* diable ltssm */
++ IFX_REG_W32(0, PCIE_RC_CCR(pcie_port));
++
++ pcie_mem_io_setup(pcie_port);
++ pcie_msi_setup(pcie_port);
++ pcie_pm_setup(pcie_port);
++ pcie_bus_setup(pcie_port);
++ pcie_device_setup(pcie_port);
++ pcie_link_setup(pcie_port);
++ pcie_error_setup(pcie_port);
++ pcie_root_setup(pcie_port);
++ pcie_vc_setup(pcie_port);
++ pcie_port_logic_setup(pcie_port);
++}
++
++static int ifx_pcie_wait_phy_link_up(int pcie_port)
++{
++ int i;
++
++ /* Wait for PHY link is up */
++ for (i = 0; i < IFX_PCIE_PHY_LINK_UP_TIMEOUT; i++) {
++ if (ifx_pcie_link_up(pcie_port)) {
++ break;
++ }
++ udelay(100);
++ }
++ if (i >= IFX_PCIE_PHY_LINK_UP_TIMEOUT) {
++ printk(KERN_ERR "%s timeout\n", __func__);
++ return -1;
++ }
++
++ /* Check data link up or not */
++ if (!(IFX_REG_R32(PCIE_RC_DR(pcie_port)) & PCIE_RC_DR_DLL_UP)) {
++ printk(KERN_ERR "%s DLL link is still down\n", __func__);
++ return -1;
++ }
++
++ /* Check Data link active or not */
++ if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_DLL_ACTIVE)) {
++ printk(KERN_ERR "%s DLL is not active\n", __func__);
++ return -1;
++ }
++ return 0;
++}
++
++static inline int pcie_app_loigc_setup(int pcie_port)
++{
++ IFX_REG_W32(PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS, PCIE_AHB_CTRL(pcie_port));
++
++ /* Pull PCIe EP out of reset */
++ pcie_device_rst_deassert(pcie_port);
++
++ /* Start LTSSM training between RC and EP */
++ pcie_ltssm_enable(pcie_port);
++
++ /* Check PHY status after enabling LTSSM */
++ if (ifx_pcie_wait_phy_link_up(pcie_port) != 0) {
++ return -1;
++ }
++ return 0;
++}
++
++/*
++ * Must be done after ltssm due to based on negotiated link
++ * width and payload size
++ * Update the Replay Time Limit. Empirically, some PCIe
++ * devices take a little longer to respond than expected under
++ * load. As a workaround for this we configure the Replay Time
++ * Limit to the value expected for a 512 byte MPS instead of
++ * our actual 128 byte MPS. The numbers below are directly
++ * from the PCIe spec table 3-4/5.
++ */
++static inline void pcie_replay_time_update(int pcie_port)
++{
++ unsigned int reg;
++ int nlw;
++ int rtl;
++
++ reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port));
++
++ nlw = MS(reg, PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH);
++ switch (nlw) {
++ case PCIE_MAX_LENGTH_WIDTH_X1:
++ rtl = 1677;
++ break;
++ case PCIE_MAX_LENGTH_WIDTH_X2:
++ rtl = 867;
++ break;
++ case PCIE_MAX_LENGTH_WIDTH_X4:
++ rtl = 462;
++ break;
++ case PCIE_MAX_LENGTH_WIDTH_X8:
++ rtl = 258;
++ break;
++ default:
++ rtl = 1677;
++ break;
++ }
++ reg = IFX_REG_R32(PCIE_ALTRT(pcie_port));
++ reg &= ~PCIE_ALTRT_REPLAY_TIME_LIMIT;
++ reg |= SM(rtl, PCIE_ALTRT_REPLAY_TIME_LIMIT);
++ IFX_REG_W32(reg, PCIE_ALTRT(pcie_port));
++
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_ALTRT 0x%08x\n",
++ __func__, IFX_REG_R32(PCIE_ALTRT(pcie_port)));
++}
++
++/*
++ * Table 359 Enhanced Configuration Address Mapping1)
++ * 1) This table is defined in Table 7-1, page 341, PCI Express Base Specification v1.1
++ * Memory Address PCI Express Configuration Space
++ * A[(20+n-1):20] Bus Number 1 < n < 8
++ * A[19:15] Device Number
++ * A[14:12] Function Number
++ * A[11:8] Extended Register Number
++ * A[7:2] Register Number
++ * A[1:0] Along with size of the access, used to generate Byte Enables
++ * For VR9, only the address bits [22:0] are mapped to the configuration space:
++ * . Address bits [22:20] select the target bus (1-of-8)1)
++ * . Address bits [19:15] select the target device (1-of-32) on the bus
++ * . Address bits [14:12] select the target function (1-of-8) within the device.
++ * . Address bits [11:2] selects the target dword (1-of-1024) within the selected function.s configuration space
++ * . Address bits [1:0] define the start byte location within the selected dword.
++ */
++static inline unsigned int pcie_bus_addr(u8 bus_num, u16 devfn, int where)
++{
++ unsigned int addr;
++ u8 bus;
++
++ if (!bus_num) {
++ /* type 0 */
++ addr = ((PCI_SLOT(devfn) & 0x1F) << 15) | ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF)& ~3);
++ } else {
++ bus = bus_num;
++ /* type 1, only support 8 buses */
++ addr = ((bus & 0x7) << 20) | ((PCI_SLOT(devfn) & 0x1F) << 15) |
++ ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF) & ~3);
++ }
++ IFX_PCIE_PRINT(PCIE_MSG_CFG, "%s: bus addr : %02x:%02x.%01x/%02x, addr=%08x\n",
++ __func__, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn), where, addr);
++ return addr;
++}
++
++static int pcie_valid_config(int pcie_port, int bus, int dev)
++{
++ /* RC itself */
++ if ((bus == 0) && (dev == 0))
++ return 1;
++
++ /* No physical link */
++ if (!ifx_pcie_link_up(pcie_port))
++ return 0;
++
++ /* Bus zero only has RC itself
++ * XXX, check if EP will be integrated
++ */
++ if ((bus == 0) && (dev != 0))
++ return 0;
++
++ /* Maximum 8 buses supported for VRX */
++ if (bus > 9)
++ return 0;
++
++ /*
++ * PCIe is PtP link, one bus only supports only one device
++ * except bus zero and PCIe switch which is virtual bus device
++ * The following two conditions really depends on the system design
++ * and attached the device.
++ * XXX, how about more new switch
++ */
++ if ((bus == 1) && (dev != 0))
++ return 0;
++
++ if ((bus >= 3) && (dev != 0))
++ return 0;
++ return 1;
++}
++
++static inline unsigned int ifx_pcie_cfg_rd(int pcie_port, unsigned int reg)
++{
++ return IFX_REG_R32((volatile unsigned int *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg));
++}
++
++static inline void ifx_pcie_cfg_wr(int pcie_port, unsigned int reg, unsigned int val)
++{
++ IFX_REG_W32( val, (volatile unsigned int *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg));
++}
++
++static inline unsigned int ifx_pcie_rc_cfg_rd(int pcie_port, unsigned int reg)
++{
++ return IFX_REG_R32((volatile unsigned int *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg));
++}
++
++static inline void ifx_pcie_rc_cfg_wr(int pcie_port, unsigned int reg, unsigned int val)
++{
++ IFX_REG_W32(val, (volatile unsigned int *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg));
++}
++
++unsigned int ifx_pcie_bus_enum_read_hack(int where, unsigned int value)
++{
++ unsigned int tvalue = value;
++
++ if (where == PCI_PRIMARY_BUS) {
++ u8 primary, secondary, subordinate;
++
++ primary = tvalue & 0xFF;
++ secondary = (tvalue >> 8) & 0xFF;
++ subordinate = (tvalue >> 16) & 0xFF;
++ primary += pcibios_1st_host_bus_nr();
++ secondary += pcibios_1st_host_bus_nr();
++ subordinate += pcibios_1st_host_bus_nr();
++ tvalue = (tvalue & 0xFF000000) | (unsigned int)primary | (unsigned int)(secondary << 8) | (unsigned int)(subordinate << 16);
++ }
++ return tvalue;
++}
++
++unsigned int ifx_pcie_bus_enum_write_hack(int where, unsigned int value)
++{
++ unsigned int tvalue = value;
++
++ if (where == PCI_PRIMARY_BUS) {
++ u8 primary, secondary, subordinate;
++
++ primary = tvalue & 0xFF;
++ secondary = (tvalue >> 8) & 0xFF;
++ subordinate = (tvalue >> 16) & 0xFF;
++ if (primary > 0 && primary != 0xFF)
++ primary -= pcibios_1st_host_bus_nr();
++ if (secondary > 0 && secondary != 0xFF)
++ secondary -= pcibios_1st_host_bus_nr();
++ if (subordinate > 0 && subordinate != 0xFF)
++ subordinate -= pcibios_1st_host_bus_nr();
++ tvalue = (tvalue & 0xFF000000) | (unsigned int)primary | (unsigned int)(secondary << 8) | (unsigned int)(subordinate << 16);
++ } else if (where == PCI_SUBORDINATE_BUS) {
++ u8 subordinate = tvalue & 0xFF;
++ subordinate = subordinate > 0 ? subordinate - pcibios_1st_host_bus_nr() : 0;
++ tvalue = subordinate;
++ }
++ return tvalue;
++}
++
++/**
++ * \fn static int ifx_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
++ * int where, int size, unsigned int *value)
++ * \brief Read a value from configuration space
++ *
++ * \param[in] bus Pointer to pci bus
++ * \param[in] devfn PCI device function number
++ * \param[in] where PCI register number
++ * \param[in] size Register read size
++ * \param[out] value Pointer to return value
++ * \return PCIBIOS_BAD_REGISTER_NUMBER Invalid register number
++ * \return PCIBIOS_FUNC_NOT_SUPPORTED PCI function not supported
++ * \return PCIBIOS_DEVICE_NOT_FOUND PCI device not found
++ * \return PCIBIOS_SUCCESSFUL OK
++ * \ingroup IFX_PCIE_OS
++ */
++static int ifx_pcie_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, unsigned int *value)
++{
++ unsigned int data = 0;
++ int bus_number = bus->number;
++ static const unsigned int mask[8] = {0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0};
++ int ret = PCIBIOS_SUCCESSFUL;
++ struct ifx_pci_controller *ctrl = bus->sysdata;
++ int pcie_port = ctrl->port;
++
++ if (unlikely(size != 1 && size != 2 && size != 4)){
++ ret = PCIBIOS_BAD_REGISTER_NUMBER;
++ goto out;
++ }
++
++ /* Make sure the address is aligned to natural boundary */
++ if (unlikely(((size - 1) & where))) {
++ ret = PCIBIOS_BAD_REGISTER_NUMBER;
++ goto out;
++ }
++
++ /*
++ * If we are second controller, we have to cheat OS so that it assume
++ * its bus number starts from 0 in host controller
++ */
++ bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port);
++
++ /*
++ * We need to force the bus number to be zero on the root
++ * bus. Linux numbers the 2nd root bus to start after all
++ * busses on root 0.
++ */
++ if (bus->parent == NULL)
++ bus_number = 0;
++
++ /*
++ * PCIe only has a single device connected to it. It is
++ * always device ID 0. Don't bother doing reads for other
++ * device IDs on the first segment.
++ */
++ if ((bus_number == 0) && (PCI_SLOT(devfn) != 0)) {
++ ret = PCIBIOS_FUNC_NOT_SUPPORTED;
++ goto out;
++ }
++
++ if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) {
++ *value = 0xffffffff;
++ ret = PCIBIOS_DEVICE_NOT_FOUND;
++ goto out;
++ }
++
++ IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: %02x:%02x.%01x/%02x:%01d\n", __func__, bus_number,
++ PCI_SLOT(devfn), PCI_FUNC(devfn), where, size);
++
++ PCIE_IRQ_LOCK(ifx_pcie_lock);
++ if (bus_number == 0) { /* RC itself */
++ unsigned int t;
++
++ t = (where & ~3);
++ data = ifx_pcie_rc_cfg_rd(pcie_port, t);
++ IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: rd local cfg, offset:%08x, data:%08x\n",
++ __func__, t, data);
++ } else {
++ unsigned int addr = pcie_bus_addr(bus_number, devfn, where);
++
++ data = ifx_pcie_cfg_rd(pcie_port, addr);
++ if (pcie_port == IFX_PCIE_PORT0) {
++#ifdef CONFIG_IFX_PCIE_HW_SWAP
++ data = le32_to_cpu(data);
++#endif /* CONFIG_IFX_PCIE_HW_SWAP */
++ } else {
++#ifdef CONFIG_IFX_PCIE1_HW_SWAP
++ data = le32_to_cpu(data);
++#endif /* CONFIG_IFX_PCIE_HW_SWAP */
++ }
++ }
++ /* To get a correct PCI topology, we have to restore the bus number to OS */
++ data = ifx_pcie_bus_enum_hack(bus, devfn, where, data, pcie_port, 1);
++
++ PCIE_IRQ_UNLOCK(ifx_pcie_lock);
++ IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: read config: data=%08x raw=%08x\n",
++ __func__, (data >> (8 * (where & 3))) & mask[size & 7], data);
++
++ *value = (data >> (8 * (where & 3))) & mask[size & 7];
++out:
++ return ret;
++}
++
++static unsigned int ifx_pcie_size_to_value(int where, int size, unsigned int data, unsigned int value)
++{
++ unsigned int shift;
++ unsigned int tdata = data;
++
++ switch (size) {
++ case 1:
++ shift = (where & 0x3) << 3;
++ tdata &= ~(0xffU << shift);
++ tdata |= ((value & 0xffU) << shift);
++ break;
++ case 2:
++ shift = (where & 3) << 3;
++ tdata &= ~(0xffffU << shift);
++ tdata |= ((value & 0xffffU) << shift);
++ break;
++ case 4:
++ tdata = value;
++ break;
++ }
++ return tdata;
++}
++
++/**
++ * \fn static static int ifx_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
++ * int where, int size, unsigned int value)
++ * \brief Write a value to PCI configuration space
++ *
++ * \param[in] bus Pointer to pci bus
++ * \param[in] devfn PCI device function number
++ * \param[in] where PCI register number
++ * \param[in] size The register size to be written
++ * \param[in] value The valule to be written
++ * \return PCIBIOS_BAD_REGISTER_NUMBER Invalid register number
++ * \return PCIBIOS_DEVICE_NOT_FOUND PCI device not found
++ * \return PCIBIOS_SUCCESSFUL OK
++ * \ingroup IFX_PCIE_OS
++ */
++static int ifx_pcie_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, unsigned int value)
++{
++ int bus_number = bus->number;
++ int ret = PCIBIOS_SUCCESSFUL;
++ struct ifx_pci_controller *ctrl = bus->sysdata;
++ int pcie_port = ctrl->port;
++ unsigned int tvalue = value;
++ unsigned int data;
++
++ /* Make sure the address is aligned to natural boundary */
++ if (unlikely(((size - 1) & where))) {
++ ret = PCIBIOS_BAD_REGISTER_NUMBER;
++ goto out;
++ }
++ /*
++ * If we are second controller, we have to cheat OS so that it assume
++ * its bus number starts from 0 in host controller
++ */
++ bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port);
++
++ /*
++ * We need to force the bus number to be zero on the root
++ * bus. Linux numbers the 2nd root bus to start after all
++ * busses on root 0.
++ */
++ if (bus->parent == NULL)
++ bus_number = 0;
++
++ if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) {
++ ret = PCIBIOS_DEVICE_NOT_FOUND;
++ goto out;
++ }
++
++ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: %02x:%02x.%01x/%02x:%01d value=%08x\n", __func__,
++ bus_number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, value);
++
++ /* XXX, some PCIe device may need some delay */
++ PCIE_IRQ_LOCK(ifx_pcie_lock);
++
++ /*
++ * To configure the correct bus topology using native way, we have to cheat Os so that
++ * it can configure the PCIe hardware correctly.
++ */
++ tvalue = ifx_pcie_bus_enum_hack(bus, devfn, where, value, pcie_port, 0);
++
++ if (bus_number == 0) { /* RC itself */
++ unsigned int t;
++
++ t = (where & ~3);
++ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr local cfg, offset:%08x, fill:%08x\n", __func__, t, value);
++ data = ifx_pcie_rc_cfg_rd(pcie_port, t);
++ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd local cfg, offset:%08x, data:%08x\n", __func__, t, data);
++
++ data = ifx_pcie_size_to_value(where, size, data, tvalue);
++
++ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr local cfg, offset:%08x, value:%08x\n", __func__, t, data);
++ ifx_pcie_rc_cfg_wr(pcie_port, t, data);
++ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd local cfg, offset:%08x, value:%08x\n",
++ __func__, t, ifx_pcie_rc_cfg_rd(pcie_port, t));
++ } else {
++ unsigned int addr = pcie_bus_addr(bus_number, devfn, where);
++
++ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr cfg, offset:%08x, fill:%08x\n", __func__, addr, value);
++ data = ifx_pcie_cfg_rd(pcie_port, addr);
++ if (pcie_port == IFX_PCIE_PORT0) {
++#ifdef CONFIG_IFX_PCIE_HW_SWAP
++ data = le32_to_cpu(data);
++#endif /* CONFIG_IFX_PCIE_HW_SWAP */
++ } else {
++#ifdef CONFIG_IFX_PCIE1_HW_SWAP
++ data = le32_to_cpu(data);
++#endif /* CONFIG_IFX_PCIE_HW_SWAP */
++ }
++ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd cfg, offset:%08x, data:%08x\n", __func__, addr, data);
++
++ data = ifx_pcie_size_to_value(where, size, data, tvalue);
++ if (pcie_port == IFX_PCIE_PORT0) {
++#ifdef CONFIG_IFX_PCIE_HW_SWAP
++ data = cpu_to_le32(data);
++#endif /* CONFIG_IFX_PCIE_HW_SWAP */
++ } else {
++#ifdef CONFIG_IFX_PCIE1_HW_SWAP
++ data = cpu_to_le32(data);
++#endif /* CONFIG_IFX_PCIE_HW_SWAP */
++ }
++ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: wr cfg, offset:%08x, value:%08x\n", __func__, addr, data);
++ ifx_pcie_cfg_wr(pcie_port, addr, data);
++ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: rd cfg, offset:%08x, value:%08x\n",
++ __func__, addr, ifx_pcie_cfg_rd(pcie_port, addr));
++ }
++ PCIE_IRQ_UNLOCK(ifx_pcie_lock);
++out:
++ return ret;
++}
++
++static struct resource ifx_pcie_io_resource = {
++ .name = "PCIe0 I/O space",
++ .start = PCIE_IO_PHY_BASE,
++ .end = PCIE_IO_PHY_END,
++ .flags = IORESOURCE_IO,
++};
++
++static struct resource ifx_pcie_mem_resource = {
++ .name = "PCIe0 Memory space",
++ .start = PCIE_MEM_PHY_BASE,
++ .end = PCIE_MEM_PHY_END,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct pci_ops ifx_pcie_ops = {
++ .read = ifx_pcie_read_config,
++ .write = ifx_pcie_write_config,
++};
++
++static struct ifx_pci_controller ifx_pcie_controller[IFX_PCIE_CORE_NR] = {
++ {
++ .pcic = {
++ .pci_ops = &ifx_pcie_ops,
++ .mem_resource = &ifx_pcie_mem_resource,
++ .io_resource = &ifx_pcie_io_resource,
++ },
++ .port = IFX_PCIE_PORT0,
++ },
++};
++
++static inline void pcie_core_int_clear_all(int pcie_port)
++{
++ unsigned int reg;
++ reg = IFX_REG_R32(PCIE_IRNCR(pcie_port));
++ reg &= PCIE_RC_CORE_COMBINED_INT;
++ IFX_REG_W32(reg, PCIE_IRNCR(pcie_port));
++}
++
++static irqreturn_t pcie_rc_core_isr(int irq, void *dev_id)
++{
++ struct ifx_pci_controller *ctrl = (struct ifx_pci_controller *)dev_id;
++ int pcie_port = ctrl->port;
++
++ IFX_PCIE_PRINT(PCIE_MSG_ISR, "PCIe RC error intr %d\n", irq);
++ pcie_core_int_clear_all(pcie_port);
++ return IRQ_HANDLED;
++}
++
++static int pcie_rc_core_int_init(int pcie_port)
++{
++ int ret;
++
++ /* Enable core interrupt */
++ IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNEN(pcie_port));
++
++ /* Clear it first */
++ IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNCR(pcie_port));
++ ret = request_irq(pcie_irqs[pcie_port].ir_irq.irq, pcie_rc_core_isr, IRQF_DISABLED,
++ pcie_irqs[pcie_port].ir_irq.name, &ifx_pcie_controller[pcie_port]);
++ if (ret)
++ printk(KERN_ERR "%s request irq %d failed\n", __func__, IFX_PCIE_IR);
++
++ return ret;
++}
++
++int ifx_pcie_bios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++ unsigned int irq_bit = 0;
++ int irq = 0;
++ struct ifx_pci_controller *ctrl = dev->bus->sysdata;
++ int pcie_port = ctrl->port;
++
++ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s port %d dev %s slot %d pin %d \n", __func__, pcie_port, pci_name(dev), slot, pin);
++
++ if ((pin == PCIE_LEGACY_DISABLE) || (pin > PCIE_LEGACY_INT_MAX)) {
++ printk(KERN_WARNING "WARNING: dev %s: invalid interrupt pin %d\n", pci_name(dev), pin);
++ return -1;
++ }
++ /* Pin index so minus one */
++ irq_bit = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq_bit;
++ irq = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq;
++ IFX_REG_SET_BIT(irq_bit, PCIE_IRNEN(pcie_port));
++ IFX_REG_SET_BIT(irq_bit, PCIE_IRNCR(pcie_port));
++ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s irq %d assigned\n", __func__, pci_name(dev), irq);
++ return irq;
++}
++
++/**
++ * \fn int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev)
++ * \brief Called to perform platform specific PCI setup
++ *
++ * \param[in] dev The Linux PCI device structure for the device to map
++ * \return OK
++ * \ingroup IFX_PCIE_OS
++ */
++int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev)
++{
++ u16 config;
++ unsigned int dconfig;
++ int pos;
++ /* Enable reporting System errors and parity errors on all devices */
++ /* Enable parity checking and error reporting */
++ pci_read_config_word(dev, PCI_COMMAND, &config);
++ config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR /*| PCI_COMMAND_INVALIDATE |
++ PCI_COMMAND_FAST_BACK*/;
++ pci_write_config_word(dev, PCI_COMMAND, config);
++
++ if (dev->subordinate) {
++ /* Set latency timers on sub bridges */
++ pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 0x40); /* XXX, */
++ /* More bridge error detection */
++ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
++ config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
++ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
++ }
++ /* Enable the PCIe normal error reporting */
++ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
++ if (pos) {
++ /* Disable system error generation in response to error messages */
++ pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &config);
++ config &= ~(PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE | PCI_EXP_RTCTL_SEFEE);
++ pci_write_config_word(dev, pos + PCI_EXP_RTCTL, config);
++
++ /* Clear PCIE Capability's Device Status */
++ pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &config);
++ pci_write_config_word(dev, pos + PCI_EXP_DEVSTA, config);
++
++ /* Update Device Control */
++ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
++ /* Correctable Error Reporting */
++ config |= PCI_EXP_DEVCTL_CERE;
++ /* Non-Fatal Error Reporting */
++ config |= PCI_EXP_DEVCTL_NFERE;
++ /* Fatal Error Reporting */
++ config |= PCI_EXP_DEVCTL_FERE;
++ /* Unsupported Request */
++ config |= PCI_EXP_DEVCTL_URRE;
++ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
++ }
++
++ /* Find the Advanced Error Reporting capability */
++ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
++ if (pos) {
++ /* Clear Uncorrectable Error Status */
++ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &dconfig);
++ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, dconfig);
++ /* Enable reporting of all uncorrectable errors */
++ /* Uncorrectable Error Mask - turned on bits disable errors */
++ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
++ /*
++ * Leave severity at HW default. This only controls if
++ * errors are reported as uncorrectable or
++ * correctable, not if the error is reported.
++ */
++ /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
++ /* Clear Correctable Error Status */
++ pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
++ pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
++ /* Enable reporting of all correctable errors */
++ /* Correctable Error Mask - turned on bits disable errors */
++ pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
++ /* Advanced Error Capabilities */
++ pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
++ /* ECRC Generation Enable */
++ if (dconfig & PCI_ERR_CAP_ECRC_GENC)
++ dconfig |= PCI_ERR_CAP_ECRC_GENE;
++ /* ECRC Check Enable */
++ if (dconfig & PCI_ERR_CAP_ECRC_CHKC)
++ dconfig |= PCI_ERR_CAP_ECRC_CHKE;
++ pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
++
++ /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
++ /* Enable Root Port's interrupt in response to error messages */
++ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
++ PCI_ERR_ROOT_CMD_COR_EN |
++ PCI_ERR_ROOT_CMD_NONFATAL_EN |
++ PCI_ERR_ROOT_CMD_FATAL_EN);
++ /* Clear the Root status register */
++ pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
++ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
++ }
++ /* WAR, only 128 MRRS is supported, force all EPs to support this value */
++ pcie_set_readrq(dev, 128);
++ return 0;
++}
++
++static void pcie_phy_rst(int pcie_port)
++{
++ pcie_phy_rst_assert(pcie_port);
++ pcie_phy_rst_deassert(pcie_port);
++ /* Make sure PHY PLL is stable */
++ udelay(20);
++}
++
++static int pcie_rc_initialize(int pcie_port)
++{
++ int i;
++
++ pcie_rcu_endian_setup(pcie_port);
++
++ pcie_ep_gpio_rst_init(pcie_port);
++
++ /*
++ * XXX, PCIe elastic buffer bug will cause not to be detected. One more
++ * reset PCIe PHY will solve this issue
++ */
++ for (i = 0; i < IFX_PCIE_PHY_LOOP_CNT; i++) {
++ /* Disable PCIe PHY Analog part for sanity check */
++ pcie_phy_pmu_disable(pcie_port);
++ pcie_phy_rst(pcie_port);
++ /* PCIe Core reset enabled, low active, sw programmed */
++ pcie_core_rst_assert(pcie_port);
++ /* Put PCIe EP in reset status */
++ pcie_device_rst_assert(pcie_port);
++ /* PCI PHY & Core reset disabled, high active, sw programmed */
++ pcie_core_rst_deassert(pcie_port);
++ /* Already in a quiet state, program PLL, enable PHY, check ready bit */
++ pcie_phy_clock_mode_setup(pcie_port);
++ /* Enable PCIe PHY and Clock */
++ pcie_core_pmu_setup(pcie_port);
++ /* Clear status registers */
++ pcie_status_register_clear(pcie_port);
++#ifdef CONFIG_PCI_MSI
++ pcie_msi_init(pcie_port);
++#endif /* CONFIG_PCI_MSI */
++ pcie_rc_cfg_reg_setup(pcie_port);
++
++ /* Once link is up, break out */
++ if (pcie_app_loigc_setup(pcie_port) == 0)
++ break;
++ }
++ if (i >= IFX_PCIE_PHY_LOOP_CNT) {
++ printk(KERN_ERR "%s link up failed!!!!!\n", __func__);
++ return -EIO;
++ }
++ /* NB, don't increase ACK/NACK timer timeout value, which will cause a lot of COR errors */
++ pcie_replay_time_update(pcie_port);
++ return 0;
++}
++
++static int inline ifx_pcie_startup_port_nr(void)
++{
++ int pcie_port = IFX_PCIE_PORT0;
++
++ pcie_port = IFX_PCIE_PORT0;
++ return pcie_port;
++}
++
++/**
++ * \fn static int __init ifx_pcie_bios_init(void)
++ * \brief Initialize the IFX PCIe controllers
++ *
++ * \return -EIO PCIe PHY link is not up
++ * \return -ENOMEM Configuration/IO space failed to map
++ * \return 0 OK
++ * \ingroup IFX_PCIE_OS
++ */
++extern int (*ltqpci_plat_arch_init)(struct pci_dev *dev);
++extern int (*ltqpci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin);
++static int __devinit ltq_pcie_probe(struct platform_device *pdev)
++{
++ char ver_str[128] = {0};
++ void __iomem *io_map_base;
++ int pcie_port;
++ int startup_port;
++ ltqpci_map_irq = ifx_pcie_bios_map_irq;
++ ltqpci_plat_arch_init = ifx_pcie_bios_plat_dev_init;
++ /* Enable AHB Master/ Slave */
++ pcie_ahb_pmu_setup();
++
++ startup_port = ifx_pcie_startup_port_nr();
++
++ ltq_gpio_request(&pdev->dev, IFX_PCIE_GPIO_RESET, 0, 1, "pcie-reset");
++
++ for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){
++ if (pcie_rc_initialize(pcie_port) == 0) {
++ /* Otherwise, warning will pop up */
++ io_map_base = ioremap(PCIE_IO_PHY_PORT_TO_BASE(pcie_port), PCIE_IO_SIZE);
++ if (io_map_base == NULL)
++ return -ENOMEM;
++ ifx_pcie_controller[pcie_port].pcic.io_map_base = (unsigned long)io_map_base;
++ register_pci_controller(&ifx_pcie_controller[pcie_port].pcic);
++ /* XXX, clear error status */
++ pcie_rc_core_int_init(pcie_port);
++ }
++ }
++
++ printk(KERN_INFO "%s", ver_str);
++return 0;
++}
++
++static struct platform_driver ltq_pcie_driver = {
++ .probe = ltq_pcie_probe,
++ .driver = {
++ .name = "pcie-xway",
++ .owner = THIS_MODULE,
++ },
++};
++
++int __init pciebios_init(void)
++{
++ return platform_driver_register(<q_pcie_driver);
++}
++
++arch_initcall(pciebios_init);
+diff --git a/arch/mips/pci/pcie-lantiq.h b/arch/mips/pci/pcie-lantiq.h
+new file mode 100644
+index 0000000..d877c23
+--- /dev/null
++++ b/arch/mips/pci/pcie-lantiq.h
+@@ -0,0 +1,1305 @@
++/******************************************************************************
++**
++** FILE NAME : ifxmips_pcie_reg.h
++** PROJECT : IFX UEIP for VRX200
++** MODULES : PCIe module
++**
++** DATE : 02 Mar 2009
++** AUTHOR : Lei Chuanhua
++** DESCRIPTION : PCIe Root Complex Driver
++** COPYRIGHT : Copyright (c) 2009
++** Infineon Technologies AG
++** Am Campeon 1-12, 85579 Neubiberg, Germany
++**
++** This program is free software; you can redistribute it and/or modify
++** it under the terms of the GNU General Public License as published by
++** the Free Software Foundation; either version 2 of the License, or
++** (at your option) any later version.
++** HISTORY
++** $Version $Date $Author $Comment
++** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version
++*******************************************************************************/
++#ifndef IFXMIPS_PCIE_REG_H
++#define IFXMIPS_PCIE_REG_H
++#include <linux/version.h>
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/interrupt.h>
++/*!
++ \file ifxmips_pcie_reg.h
++ \ingroup IFX_PCIE
++ \brief header file for PCIe module register definition
++*/
++/* PCIe Address Mapping Base */
++#define PCIE_CFG_PHY_BASE 0x1D000000UL
++#define PCIE_CFG_BASE (KSEG1 + PCIE_CFG_PHY_BASE)
++#define PCIE_CFG_SIZE (8 * 1024 * 1024)
++
++#define PCIE_MEM_PHY_BASE 0x1C000000UL
++#define PCIE_MEM_BASE (KSEG1 + PCIE_MEM_PHY_BASE)
++#define PCIE_MEM_SIZE (16 * 1024 * 1024)
++#define PCIE_MEM_PHY_END (PCIE_MEM_PHY_BASE + PCIE_MEM_SIZE - 1)
++
++#define PCIE_IO_PHY_BASE 0x1D800000UL
++#define PCIE_IO_BASE (KSEG1 + PCIE_IO_PHY_BASE)
++#define PCIE_IO_SIZE (1 * 1024 * 1024)
++#define PCIE_IO_PHY_END (PCIE_IO_PHY_BASE + PCIE_IO_SIZE - 1)
++
++#define PCIE_RC_CFG_BASE (KSEG1 + 0x1D900000)
++#define PCIE_APP_LOGIC_REG (KSEG1 + 0x1E100900)
++#define PCIE_MSI_PHY_BASE 0x1F600000UL
++
++#define PCIE_PDI_PHY_BASE 0x1F106800UL
++#define PCIE_PDI_BASE (KSEG1 + PCIE_PDI_PHY_BASE)
++#define PCIE_PDI_SIZE 0x400
++
++#define PCIE1_CFG_PHY_BASE 0x19000000UL
++#define PCIE1_CFG_BASE (KSEG1 + PCIE1_CFG_PHY_BASE)
++#define PCIE1_CFG_SIZE (8 * 1024 * 1024)
++
++#define PCIE1_MEM_PHY_BASE 0x18000000UL
++#define PCIE1_MEM_BASE (KSEG1 + PCIE1_MEM_PHY_BASE)
++#define PCIE1_MEM_SIZE (16 * 1024 * 1024)
++#define PCIE1_MEM_PHY_END (PCIE1_MEM_PHY_BASE + PCIE1_MEM_SIZE - 1)
++
++#define PCIE1_IO_PHY_BASE 0x19800000UL
++#define PCIE1_IO_BASE (KSEG1 + PCIE1_IO_PHY_BASE)
++#define PCIE1_IO_SIZE (1 * 1024 * 1024)
++#define PCIE1_IO_PHY_END (PCIE1_IO_PHY_BASE + PCIE1_IO_SIZE - 1)
++
++#define PCIE1_RC_CFG_BASE (KSEG1 + 0x19900000)
++#define PCIE1_APP_LOGIC_REG (KSEG1 + 0x1E100700)
++#define PCIE1_MSI_PHY_BASE 0x1F400000UL
++
++#define PCIE1_PDI_PHY_BASE 0x1F700400UL
++#define PCIE1_PDI_BASE (KSEG1 + PCIE1_PDI_PHY_BASE)
++#define PCIE1_PDI_SIZE 0x400
++
++#define PCIE_CFG_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_CFG_BASE) : (PCIE_CFG_BASE))
++#define PCIE_MEM_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_BASE) : (PCIE_MEM_BASE))
++#define PCIE_IO_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_BASE) : (PCIE_IO_BASE))
++#define PCIE_MEM_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_PHY_BASE) : (PCIE_MEM_PHY_BASE))
++#define PCIE_MEM_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_MEM_PHY_END) : (PCIE_MEM_PHY_END))
++#define PCIE_IO_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_PHY_BASE) : (PCIE_IO_PHY_BASE))
++#define PCIE_IO_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_IO_PHY_END) : (PCIE_IO_PHY_END))
++#define PCIE_APP_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_APP_LOGIC_REG) : (PCIE_APP_LOGIC_REG))
++#define PCIE_RC_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_RC_CFG_BASE) : (PCIE_RC_CFG_BASE))
++#define PCIE_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_PDI_BASE) : (PCIE_PDI_BASE))
++
++/* PCIe Application Logic Register */
++/* RC Core Control Register */
++#define PCIE_RC_CCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x10)
++/* This should be enabled after initializing configuratin registers
++ * Also should check link status retraining bit
++ */
++#define PCIE_RC_CCR_LTSSM_ENABLE 0x00000001 /* Enable LTSSM to continue link establishment */
++
++/* RC Core Debug Register */
++#define PCIE_RC_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x14)
++#define PCIE_RC_DR_DLL_UP 0x00000001 /* Data Link Layer Up */
++#define PCIE_RC_DR_CURRENT_POWER_STATE 0x0000000E /* Current Power State */
++#define PCIE_RC_DR_CURRENT_POWER_STATE_S 1
++#define PCIE_RC_DR_CURRENT_LTSSM_STATE 0x000001F0 /* Current LTSSM State */
++#define PCIE_RC_DR_CURRENT_LTSSM_STATE_S 4
++
++#define PCIE_RC_DR_PM_DEV_STATE 0x00000E00 /* Power Management D-State */
++#define PCIE_RC_DR_PM_DEV_STATE_S 9
++
++#define PCIE_RC_DR_PM_ENABLED 0x00001000 /* Power Management State from PMU */
++#define PCIE_RC_DR_PME_EVENT_ENABLED 0x00002000 /* Power Management Event Enable State */
++#define PCIE_RC_DR_AUX_POWER_ENABLED 0x00004000 /* Auxiliary Power Enable */
++
++/* Current Power State Definition */
++enum {
++ PCIE_RC_DR_D0 = 0,
++ PCIE_RC_DR_D1, /* Not supported */
++ PCIE_RC_DR_D2, /* Not supported */
++ PCIE_RC_DR_D3,
++ PCIE_RC_DR_UN,
++};
++
++/* PHY Link Status Register */
++#define PCIE_PHY_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x18)
++#define PCIE_PHY_SR_PHY_LINK_UP 0x00000001 /* PHY Link Up/Down Indicator */
++
++/* Electromechanical Control Register */
++#define PCIE_EM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x1C)
++#define PCIE_EM_CR_CARD_IS_PRESENT 0x00000001 /* Card Presence Detect State */
++#define PCIE_EM_CR_MRL_OPEN 0x00000002 /* MRL Sensor State */
++#define PCIE_EM_CR_POWER_FAULT_SET 0x00000004 /* Power Fault Detected */
++#define PCIE_EM_CR_MRL_SENSOR_SET 0x00000008 /* MRL Sensor Changed */
++#define PCIE_EM_CR_PRESENT_DETECT_SET 0x00000010 /* Card Presense Detect Changed */
++#define PCIE_EM_CR_CMD_CPL_INT_SET 0x00000020 /* Command Complete Interrupt */
++#define PCIE_EM_CR_SYS_INTERLOCK_SET 0x00000040 /* System Electromechanical IterLock Engaged */
++#define PCIE_EM_CR_ATTENTION_BUTTON_SET 0x00000080 /* Attention Button Pressed */
++
++/* Interrupt Status Register */
++#define PCIE_IR_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x20)
++#define PCIE_IR_SR_PME_CAUSE_MSI 0x00000002 /* MSI caused by PME */
++#define PCIE_IR_SR_HP_PME_WAKE_GEN 0x00000004 /* Hotplug PME Wake Generation */
++#define PCIE_IR_SR_HP_MSI 0x00000008 /* Hotplug MSI */
++#define PCIE_IR_SR_AHB_LU_ERR 0x00000030 /* AHB Bridge Lookup Error Signals */
++#define PCIE_IR_SR_AHB_LU_ERR_S 4
++#define PCIE_IR_SR_INT_MSG_NUM 0x00003E00 /* Interrupt Message Number */
++#define PCIE_IR_SR_INT_MSG_NUM_S 9
++#define PCIE_IR_SR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */
++#define PCIE_IR_SR_AER_INT_MSG_NUM_S 27
++
++/* Message Control Register */
++#define PCIE_MSG_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x30)
++#define PCIE_MSG_CR_GEN_PME_TURN_OFF_MSG 0x00000001 /* Generate PME Turn Off Message */
++#define PCIE_MSG_CR_GEN_UNLOCK_MSG 0x00000002 /* Generate Unlock Message */
++
++#define PCIE_VDM_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x34)
++
++/* Vendor-Defined Message Requester ID Register */
++#define PCIE_VDM_RID(X) (PCIE_APP_PORT_TO_BASE (X) + 0x38)
++#define PCIE_VDM_RID_VENROR_MSG_REQ_ID 0x0000FFFF
++#define PCIE_VDM_RID_VDMRID_S 0
++
++/* ASPM Control Register */
++#define PCIE_ASPM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x40)
++#define PCIE_ASPM_CR_HOT_RST 0x00000001 /* Hot Reset Request to the downstream device */
++#define PCIE_ASPM_CR_REQ_EXIT_L1 0x00000002 /* Request to Exit L1 */
++#define PCIE_ASPM_CR_REQ_ENTER_L1 0x00000004 /* Request to Enter L1 */
++
++/* Vendor Message DW0 Register */
++#define PCIE_VM_MSG_DW0(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x50)
++#define PCIE_VM_MSG_DW0_TYPE 0x0000001F /* Message type */
++#define PCIE_VM_MSG_DW0_TYPE_S 0
++#define PCIE_VM_MSG_DW0_FORMAT 0x00000060 /* Format */
++#define PCIE_VM_MSG_DW0_FORMAT_S 5
++#define PCIE_VM_MSG_DW0_TC 0x00007000 /* Traffic Class */
++#define PCIE_VM_MSG_DW0_TC_S 12
++#define PCIE_VM_MSG_DW0_ATTR 0x000C0000 /* Atrributes */
++#define PCIE_VM_MSG_DW0_ATTR_S 18
++#define PCIE_VM_MSG_DW0_EP_TLP 0x00100000 /* Poisoned TLP */
++#define PCIE_VM_MSG_DW0_TD 0x00200000 /* TLP Digest */
++#define PCIE_VM_MSG_DW0_LEN 0xFFC00000 /* Length */
++#define PCIE_VM_MSG_DW0_LEN_S 22
++
++/* Format Definition */
++enum {
++ PCIE_VM_MSG_FORMAT_00 = 0, /* 3DW Hdr, no data*/
++ PCIE_VM_MSG_FORMAT_01, /* 4DW Hdr, no data */
++ PCIE_VM_MSG_FORMAT_10, /* 3DW Hdr, with data */
++ PCIE_VM_MSG_FORMAT_11, /* 4DW Hdr, with data */
++};
++
++/* Traffic Class Definition */
++enum {
++ PCIE_VM_MSG_TC0 = 0,
++ PCIE_VM_MSG_TC1,
++ PCIE_VM_MSG_TC2,
++ PCIE_VM_MSG_TC3,
++ PCIE_VM_MSG_TC4,
++ PCIE_VM_MSG_TC5,
++ PCIE_VM_MSG_TC6,
++ PCIE_VM_MSG_TC7,
++};
++
++/* Attributes Definition */
++enum {
++ PCIE_VM_MSG_ATTR_00 = 0, /* RO and No Snoop cleared */
++ PCIE_VM_MSG_ATTR_01, /* RO cleared , No Snoop set */
++ PCIE_VM_MSG_ATTR_10, /* RO set, No Snoop cleared*/
++ PCIE_VM_MSG_ATTR_11, /* RO and No Snoop set */
++};
++
++/* Payload Size Definition */
++#define PCIE_VM_MSG_LEN_MIN 0
++#define PCIE_VM_MSG_LEN_MAX 1024
++
++/* Vendor Message DW1 Register */
++#define PCIE_VM_MSG_DW1(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x54)
++#define PCIE_VM_MSG_DW1_FUNC_NUM 0x00000070 /* Function Number */
++#define PCIE_VM_MSG_DW1_FUNC_NUM_S 8
++#define PCIE_VM_MSG_DW1_CODE 0x00FF0000 /* Message Code */
++#define PCIE_VM_MSG_DW1_CODE_S 16
++#define PCIE_VM_MSG_DW1_TAG 0xFF000000 /* Tag */
++#define PCIE_VM_MSG_DW1_TAG_S 24
++
++#define PCIE_VM_MSG_DW2(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x58)
++#define PCIE_VM_MSG_DW3(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x5C)
++
++/* Vendor Message Request Register */
++#define PCIE_VM_MSG_REQR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x60)
++#define PCIE_VM_MSG_REQR_REQ 0x00000001 /* Vendor Message Request */
++
++
++/* AHB Slave Side Band Control Register */
++#define PCIE_AHB_SSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x70)
++#define PCIE_AHB_SSB_REQ_BCM 0x00000001 /* Slave Reques BCM filed */
++#define PCIE_AHB_SSB_REQ_EP 0x00000002 /* Slave Reques EP filed */
++#define PCIE_AHB_SSB_REQ_TD 0x00000004 /* Slave Reques TD filed */
++#define PCIE_AHB_SSB_REQ_ATTR 0x00000018 /* Slave Reques Attribute number */
++#define PCIE_AHB_SSB_REQ_ATTR_S 3
++#define PCIE_AHB_SSB_REQ_TC 0x000000E0 /* Slave Request TC Field */
++#define PCIE_AHB_SSB_REQ_TC_S 5
++
++/* AHB Master SideBand Ctrl Register */
++#define PCIE_AHB_MSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x74)
++#define PCIE_AHB_MSB_RESP_ATTR 0x00000003 /* Master Response Attribute number */
++#define PCIE_AHB_MSB_RESP_ATTR_S 0
++#define PCIE_AHB_MSB_RESP_BAD_EOT 0x00000004 /* Master Response Badeot filed */
++#define PCIE_AHB_MSB_RESP_BCM 0x00000008 /* Master Response BCM filed */
++#define PCIE_AHB_MSB_RESP_EP 0x00000010 /* Master Response EP filed */
++#define PCIE_AHB_MSB_RESP_TD 0x00000020 /* Master Response TD filed */
++#define PCIE_AHB_MSB_RESP_FUN_NUM 0x000003C0 /* Master Response Function number */
++#define PCIE_AHB_MSB_RESP_FUN_NUM_S 6
++
++/* AHB Control Register, fixed bus enumeration exception */
++#define PCIE_AHB_CTRL(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x78)
++#define PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS 0x00000001
++
++/* Interrupt Enalbe Register */
++#define PCIE_IRNEN(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF4)
++#define PCIE_IRNCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF8)
++#define PCIE_IRNICR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xFC)
++
++/* PCIe interrupt enable/control/capture register definition */
++#define PCIE_IRN_AER_REPORT 0x00000001 /* AER Interrupt */
++#define PCIE_IRN_AER_MSIX 0x00000002 /* Advanced Error MSI-X Interrupt */
++#define PCIE_IRN_PME 0x00000004 /* PME Interrupt */
++#define PCIE_IRN_HOTPLUG 0x00000008 /* Hotplug Interrupt */
++#define PCIE_IRN_RX_VDM_MSG 0x00000010 /* Vendor-Defined Message Interrupt */
++#define PCIE_IRN_RX_CORRECTABLE_ERR_MSG 0x00000020 /* Correctable Error Message Interrupt */
++#define PCIE_IRN_RX_NON_FATAL_ERR_MSG 0x00000040 /* Non-fatal Error Message */
++#define PCIE_IRN_RX_FATAL_ERR_MSG 0x00000080 /* Fatal Error Message */
++#define PCIE_IRN_RX_PME_MSG 0x00000100 /* PME Message Interrupt */
++#define PCIE_IRN_RX_PME_TURNOFF_ACK 0x00000200 /* PME Turnoff Ack Message Interrupt */
++#define PCIE_IRN_AHB_BR_FATAL_ERR 0x00000400 /* AHB Fatal Error Interrupt */
++#define PCIE_IRN_LINK_AUTO_BW_STATUS 0x00000800 /* Link Auto Bandwidth Status Interrupt */
++#define PCIE_IRN_BW_MGT 0x00001000 /* Bandwidth Managment Interrupt */
++#define PCIE_IRN_INTA 0x00002000 /* INTA */
++#define PCIE_IRN_INTB 0x00004000 /* INTB */
++#define PCIE_IRN_INTC 0x00008000 /* INTC */
++#define PCIE_IRN_INTD 0x00010000 /* INTD */
++#define PCIE_IRN_WAKEUP 0x00020000 /* Wake up Interrupt */
++
++#define PCIE_RC_CORE_COMBINED_INT (PCIE_IRN_AER_REPORT | PCIE_IRN_AER_MSIX | PCIE_IRN_PME | \
++ PCIE_IRN_HOTPLUG | PCIE_IRN_RX_VDM_MSG | PCIE_IRN_RX_CORRECTABLE_ERR_MSG |\
++ PCIE_IRN_RX_NON_FATAL_ERR_MSG | PCIE_IRN_RX_FATAL_ERR_MSG | \
++ PCIE_IRN_RX_PME_MSG | PCIE_IRN_RX_PME_TURNOFF_ACK | PCIE_IRN_AHB_BR_FATAL_ERR | \
++ PCIE_IRN_LINK_AUTO_BW_STATUS | PCIE_IRN_BW_MGT)
++/* PCIe RC Configuration Register */
++#define PCIE_VDID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x00)
++
++/* Bit definition from pci_reg.h */
++#define PCIE_PCICMDSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x04)
++#define PCIE_CCRID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x08)
++#define PCIE_CLSLTHTBR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x0C) /* EP only */
++/* BAR0, BAR1,Only necessary if the bridges implements a device-specific register set or memory buffer */
++#define PCIE_BAR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10) /* Not used*/
++#define PCIE_BAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14) /* Not used */
++
++#define PCIE_BNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x18) /* Mandatory */
++/* Bus Number Register bits */
++#define PCIE_BNR_PRIMARY_BUS_NUM 0x000000FF
++#define PCIE_BNR_PRIMARY_BUS_NUM_S 0
++#define PCIE_PNR_SECONDARY_BUS_NUM 0x0000FF00
++#define PCIE_PNR_SECONDARY_BUS_NUM_S 8
++#define PCIE_PNR_SUB_BUS_NUM 0x00FF0000
++#define PCIE_PNR_SUB_BUS_NUM_S 16
++
++/* IO Base/Limit Register bits */
++#define PCIE_IOBLSECS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x1C) /* RC only */
++#define PCIE_IOBLSECS_32BIT_IO_ADDR 0x00000001
++#define PCIE_IOBLSECS_IO_BASE_ADDR 0x000000F0
++#define PCIE_IOBLSECS_IO_BASE_ADDR_S 4
++#define PCIE_IOBLSECS_32BIT_IOLIMT 0x00000100
++#define PCIE_IOBLSECS_IO_LIMIT_ADDR 0x0000F000
++#define PCIE_IOBLSECS_IO_LIMIT_ADDR_S 12
++
++/* Non-prefetchable Memory Base/Limit Register bit */
++#define PCIE_MBML(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x20) /* RC only */
++#define PCIE_MBML_MEM_BASE_ADDR 0x0000FFF0
++#define PCIE_MBML_MEM_BASE_ADDR_S 4
++#define PCIE_MBML_MEM_LIMIT_ADDR 0xFFF00000
++#define PCIE_MBML_MEM_LIMIT_ADDR_S 20
++
++/* Prefetchable Memory Base/Limit Register bit */
++#define PCIE_PMBL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x24) /* RC only */
++#define PCIE_PMBL_64BIT_ADDR 0x00000001
++#define PCIE_PMBL_UPPER_12BIT 0x0000FFF0
++#define PCIE_PMBL_UPPER_12BIT_S 4
++#define PCIE_PMBL_E64MA 0x00010000
++#define PCIE_PMBL_END_ADDR 0xFFF00000
++#define PCIE_PMBL_END_ADDR_S 20
++#define PCIE_PMBU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x28) /* RC only */
++#define PCIE_PMLU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x2C) /* RC only */
++
++/* I/O Base/Limit Upper 16 bits register */
++#define PCIE_IO_BANDL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x30) /* RC only */
++#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE 0x0000FFFF
++#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE_S 0
++#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT 0xFFFF0000
++#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT_S 16
++
++#define PCIE_CPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x34)
++#define PCIE_EBBAR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x38)
++
++/* Interrupt and Secondary Bridge Control Register */
++#define PCIE_INTRBCTRL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x3C)
++
++#define PCIE_INTRBCTRL_INT_LINE 0x000000FF
++#define PCIE_INTRBCTRL_INT_LINE_S 0
++#define PCIE_INTRBCTRL_INT_PIN 0x0000FF00
++#define PCIE_INTRBCTRL_INT_PIN_S 8
++#define PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE 0x00010000 /* #PERR */
++#define PCIE_INTRBCTRL_SERR_ENABLE 0x00020000 /* #SERR */
++#define PCIE_INTRBCTRL_ISA_ENABLE 0x00040000 /* ISA enable, IO 64KB only */
++#define PCIE_INTRBCTRL_VGA_ENABLE 0x00080000 /* VGA enable */
++#define PCIE_INTRBCTRL_VGA_16BIT_DECODE 0x00100000 /* VGA 16bit decode */
++#define PCIE_INTRBCTRL_RST_SECONDARY_BUS 0x00400000 /* Secondary bus rest, hot rest, 1ms */
++/* Others are read only */
++enum {
++ PCIE_INTRBCTRL_INT_NON = 0,
++ PCIE_INTRBCTRL_INTA,
++ PCIE_INTRBCTRL_INTB,
++ PCIE_INTRBCTRL_INTC,
++ PCIE_INTRBCTRL_INTD,
++};
++
++#define PCIE_PM_CAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x40)
++
++/* Power Management Control and Status Register */
++#define PCIE_PM_CSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x44)
++
++#define PCIE_PM_CSR_POWER_STATE 0x00000003 /* Power State */
++#define PCIE_PM_CSR_POWER_STATE_S 0
++#define PCIE_PM_CSR_SW_RST 0x00000008 /* Soft Reset Enabled */
++#define PCIE_PM_CSR_PME_ENABLE 0x00000100 /* PME Enable */
++#define PCIE_PM_CSR_PME_STATUS 0x00008000 /* PME status */
++
++/* MSI Capability Register for EP */
++#define PCIE_MCAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x50)
++
++#define PCIE_MCAPR_MSI_CAP_ID 0x000000FF /* MSI Capability ID */
++#define PCIE_MCAPR_MSI_CAP_ID_S 0
++#define PCIE_MCAPR_MSI_NEXT_CAP_PTR 0x0000FF00 /* Next Capability Pointer */
++#define PCIE_MCAPR_MSI_NEXT_CAP_PTR_S 8
++#define PCIE_MCAPR_MSI_ENABLE 0x00010000 /* MSI Enable */
++#define PCIE_MCAPR_MULTI_MSG_CAP 0x000E0000 /* Multiple Message Capable */
++#define PCIE_MCAPR_MULTI_MSG_CAP_S 17
++#define PCIE_MCAPR_MULTI_MSG_ENABLE 0x00700000 /* Multiple Message Enable */
++#define PCIE_MCAPR_MULTI_MSG_ENABLE_S 20
++#define PCIE_MCAPR_ADDR64_CAP 0X00800000 /* 64-bit Address Capable */
++
++/* MSI Message Address Register */
++#define PCIE_MA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x54)
++
++#define PCIE_MA_ADDR_MASK 0xFFFFFFFC /* Message Address */
++
++/* MSI Message Upper Address Register */
++#define PCIE_MUA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x58)
++
++/* MSI Message Data Register */
++#define PCIE_MD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x5C)
++
++#define PCIE_MD_DATA 0x0000FFFF /* Message Data */
++#define PCIE_MD_DATA_S 0
++
++/* PCI Express Capability Register */
++#define PCIE_XCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70)
++
++#define PCIE_XCAP_ID 0x000000FF /* PCI Express Capability ID */
++#define PCIE_XCAP_ID_S 0
++#define PCIE_XCAP_NEXT_CAP 0x0000FF00 /* Next Capability Pointer */
++#define PCIE_XCAP_NEXT_CAP_S 8
++#define PCIE_XCAP_VER 0x000F0000 /* PCI Express Capability Version */
++#define PCIE_XCAP_VER_S 16
++#define PCIE_XCAP_DEV_PORT_TYPE 0x00F00000 /* Device Port Type */
++#define PCIE_XCAP_DEV_PORT_TYPE_S 20
++#define PCIE_XCAP_SLOT_IMPLEMENTED 0x01000000 /* Slot Implemented */
++#define PCIE_XCAP_MSG_INT_NUM 0x3E000000 /* Interrupt Message Number */
++#define PCIE_XCAP_MSG_INT_NUM_S 25
++
++/* Device Capability Register */
++#define PCIE_DCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74)
++
++#define PCIE_DCAP_MAX_PAYLOAD_SIZE 0x00000007 /* Max Payload size */
++#define PCIE_DCAP_MAX_PAYLOAD_SIZE_S 0
++#define PCIE_DCAP_PHANTOM_FUNC 0x00000018 /* Phanton Function, not supported */
++#define PCIE_DCAP_PHANTOM_FUNC_S 3
++#define PCIE_DCAP_EXT_TAG 0x00000020 /* Extended Tag Field */
++#define PCIE_DCAP_EP_L0S_LATENCY 0x000001C0 /* EP L0s latency only */
++#define PCIE_DCAP_EP_L0S_LATENCY_S 6
++#define PCIE_DCAP_EP_L1_LATENCY 0x00000E00 /* EP L1 latency only */
++#define PCIE_DCAP_EP_L1_LATENCY_S 9
++#define PCIE_DCAP_ROLE_BASE_ERR_REPORT 0x00008000 /* Role Based ERR */
++
++/* Maximum payload size supported */
++enum {
++ PCIE_MAX_PAYLOAD_128 = 0,
++ PCIE_MAX_PAYLOAD_256,
++ PCIE_MAX_PAYLOAD_512,
++ PCIE_MAX_PAYLOAD_1024,
++ PCIE_MAX_PAYLOAD_2048,
++ PCIE_MAX_PAYLOAD_4096,
++};
++
++/* Device Control and Status Register */
++#define PCIE_DCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x78)
++
++#define PCIE_DCTLSTS_CORRECTABLE_ERR_EN 0x00000001 /* COR-ERR */
++#define PCIE_DCTLSTS_NONFATAL_ERR_EN 0x00000002 /* Non-fatal ERR */
++#define PCIE_DCTLSTS_FATAL_ERR_EN 0x00000004 /* Fatal ERR */
++#define PCIE_DCTLSYS_UR_REQ_EN 0x00000008 /* UR ERR */
++#define PCIE_DCTLSTS_RELAXED_ORDERING_EN 0x00000010 /* Enable relaxing ordering */
++#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE 0x000000E0 /* Max payload mask */
++#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE_S 5
++#define PCIE_DCTLSTS_EXT_TAG_EN 0x00000100 /* Extended tag field */
++#define PCIE_DCTLSTS_PHANTOM_FUNC_EN 0x00000200 /* Phantom Function Enable */
++#define PCIE_DCTLSTS_AUX_PM_EN 0x00000400 /* AUX Power PM Enable */
++#define PCIE_DCTLSTS_NO_SNOOP_EN 0x00000800 /* Enable no snoop, except root port*/
++#define PCIE_DCTLSTS_MAX_READ_SIZE 0x00007000 /* Max Read Request size*/
++#define PCIE_DCTLSTS_MAX_READ_SIZE_S 12
++#define PCIE_DCTLSTS_CORRECTABLE_ERR 0x00010000 /* COR-ERR Detected */
++#define PCIE_DCTLSTS_NONFATAL_ERR 0x00020000 /* Non-Fatal ERR Detected */
++#define PCIE_DCTLSTS_FATAL_ER 0x00040000 /* Fatal ERR Detected */
++#define PCIE_DCTLSTS_UNSUPPORTED_REQ 0x00080000 /* UR Detected */
++#define PCIE_DCTLSTS_AUX_POWER 0x00100000 /* Aux Power Detected */
++#define PCIE_DCTLSTS_TRANSACT_PENDING 0x00200000 /* Transaction pending */
++
++#define PCIE_DCTLSTS_ERR_EN (PCIE_DCTLSTS_CORRECTABLE_ERR_EN | \
++ PCIE_DCTLSTS_NONFATAL_ERR_EN | PCIE_DCTLSTS_FATAL_ERR_EN | \
++ PCIE_DCTLSYS_UR_REQ_EN)
++
++/* Link Capability Register */
++#define PCIE_LCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7C)
++#define PCIE_LCAP_MAX_LINK_SPEED 0x0000000F /* Max link speed, 0x1 by default */
++#define PCIE_LCAP_MAX_LINK_SPEED_S 0
++#define PCIE_LCAP_MAX_LENGTH_WIDTH 0x000003F0 /* Maxium Length Width */
++#define PCIE_LCAP_MAX_LENGTH_WIDTH_S 4
++#define PCIE_LCAP_ASPM_LEVEL 0x00000C00 /* Active State Link PM Support */
++#define PCIE_LCAP_ASPM_LEVEL_S 10
++#define PCIE_LCAP_L0S_EIXT_LATENCY 0x00007000 /* L0s Exit Latency */
++#define PCIE_LCAP_L0S_EIXT_LATENCY_S 12
++#define PCIE_LCAP_L1_EXIT_LATENCY 0x00038000 /* L1 Exit Latency */
++#define PCIE_LCAP_L1_EXIT_LATENCY_S 15
++#define PCIE_LCAP_CLK_PM 0x00040000 /* Clock Power Management */
++#define PCIE_LCAP_SDER 0x00080000 /* Surprise Down Error Reporting */
++#define PCIE_LCAP_DLL_ACTIVE_REPROT 0x00100000 /* Data Link Layer Active Reporting Capable */
++#define PCIE_LCAP_PORT_NUM 0xFF0000000 /* Port number */
++#define PCIE_LCAP_PORT_NUM_S 24
++
++/* Maximum Length width definition */
++#define PCIE_MAX_LENGTH_WIDTH_RES 0x00
++#define PCIE_MAX_LENGTH_WIDTH_X1 0x01 /* Default */
++#define PCIE_MAX_LENGTH_WIDTH_X2 0x02
++#define PCIE_MAX_LENGTH_WIDTH_X4 0x04
++#define PCIE_MAX_LENGTH_WIDTH_X8 0x08
++#define PCIE_MAX_LENGTH_WIDTH_X12 0x0C
++#define PCIE_MAX_LENGTH_WIDTH_X16 0x10
++#define PCIE_MAX_LENGTH_WIDTH_X32 0x20
++
++/* Active State Link PM definition */
++enum {
++ PCIE_ASPM_RES0 = 0,
++ PCIE_ASPM_L0S_ENTRY_SUPPORT, /* L0s */
++ PCIE_ASPM_RES1,
++ PCIE_ASPM_L0S_L1_ENTRY_SUPPORT, /* L0s and L1, default */
++};
++
++/* L0s Exit Latency definition */
++enum {
++ PCIE_L0S_EIXT_LATENCY_L64NS = 0, /* < 64 ns */
++ PCIE_L0S_EIXT_LATENCY_B64A128, /* > 64 ns < 128 ns */
++ PCIE_L0S_EIXT_LATENCY_B128A256, /* > 128 ns < 256 ns */
++ PCIE_L0S_EIXT_LATENCY_B256A512, /* > 256 ns < 512 ns */
++ PCIE_L0S_EIXT_LATENCY_B512TO1U, /* > 512 ns < 1 us */
++ PCIE_L0S_EIXT_LATENCY_B1A2U, /* > 1 us < 2 us */
++ PCIE_L0S_EIXT_LATENCY_B2A4U, /* > 2 us < 4 us */
++ PCIE_L0S_EIXT_LATENCY_M4US, /* > 4 us */
++};
++
++/* L1 Exit Latency definition */
++enum {
++ PCIE_L1_EXIT_LATENCY_L1US = 0, /* < 1 us */
++ PCIE_L1_EXIT_LATENCY_B1A2, /* > 1 us < 2 us */
++ PCIE_L1_EXIT_LATENCY_B2A4, /* > 2 us < 4 us */
++ PCIE_L1_EXIT_LATENCY_B4A8, /* > 4 us < 8 us */
++ PCIE_L1_EXIT_LATENCY_B8A16, /* > 8 us < 16 us */
++ PCIE_L1_EXIT_LATENCY_B16A32, /* > 16 us < 32 us */
++ PCIE_L1_EXIT_LATENCY_B32A64, /* > 32 us < 64 us */
++ PCIE_L1_EXIT_LATENCY_M64US, /* > 64 us */
++};
++
++/* Link Control and Status Register */
++#define PCIE_LCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x80)
++#define PCIE_LCTLSTS_ASPM_ENABLE 0x00000003 /* Active State Link PM Control */
++#define PCIE_LCTLSTS_ASPM_ENABLE_S 0
++#define PCIE_LCTLSTS_RCB128 0x00000008 /* Read Completion Boundary 128*/
++#define PCIE_LCTLSTS_LINK_DISABLE 0x00000010 /* Link Disable */
++#define PCIE_LCTLSTS_RETRIAN_LINK 0x00000020 /* Retrain Link */
++#define PCIE_LCTLSTS_COM_CLK_CFG 0x00000040 /* Common Clock Configuration */
++#define PCIE_LCTLSTS_EXT_SYNC 0x00000080 /* Extended Synch */
++#define PCIE_LCTLSTS_CLK_PM_EN 0x00000100 /* Enable Clock Powerm Management */
++#define PCIE_LCTLSTS_LINK_SPEED 0x000F0000 /* Link Speed */
++#define PCIE_LCTLSTS_LINK_SPEED_S 16
++#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH 0x03F00000 /* Negotiated Link Width */
++#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH_S 20
++#define PCIE_LCTLSTS_RETRAIN_PENDING 0x08000000 /* Link training is ongoing */
++#define PCIE_LCTLSTS_SLOT_CLK_CFG 0x10000000 /* Slot Clock Configuration */
++#define PCIE_LCTLSTS_DLL_ACTIVE 0x20000000 /* Data Link Layer Active */
++
++/* Slot Capabilities Register */
++#define PCIE_SLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x84)
++
++/* Slot Capabilities */
++#define PCIE_SLCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x88)
++
++/* Root Control and Capability Register */
++#define PCIE_RCTLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x8C)
++#define PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR 0x00000001 /* #SERR on COR-ERR */
++#define PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR 0x00000002 /* #SERR on Non-Fatal ERR */
++#define PCIE_RCTLCAP_SERR_ON_FATAL_ERR 0x00000004 /* #SERR on Fatal ERR */
++#define PCIE_RCTLCAP_PME_INT_EN 0x00000008 /* PME Interrupt Enable */
++#define PCIE_RCTLCAP_SERR_ENABLE (PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR | \
++ PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR | PCIE_RCTLCAP_SERR_ON_FATAL_ERR)
++/* Root Status Register */
++#define PCIE_RSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x90)
++#define PCIE_RSTS_PME_REQ_ID 0x0000FFFF /* PME Request ID */
++#define PCIE_RSTS_PME_REQ_ID_S 0
++#define PCIE_RSTS_PME_STATUS 0x00010000 /* PME Status */
++#define PCIE_RSTS_PME_PENDING 0x00020000 /* PME Pending */
++
++/* PCI Express Enhanced Capability Header */
++#define PCIE_ENHANCED_CAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x100)
++#define PCIE_ENHANCED_CAP_ID 0x0000FFFF /* PCI Express Extended Capability ID */
++#define PCIE_ENHANCED_CAP_ID_S 0
++#define PCIE_ENHANCED_CAP_VER 0x000F0000 /* Capability Version */
++#define PCIE_ENHANCED_CAP_VER_S 16
++#define PCIE_ENHANCED_CAP_NEXT_OFFSET 0xFFF00000 /* Next Capability Offset */
++#define PCIE_ENHANCED_CAP_NEXT_OFFSET_S 20
++
++/* Uncorrectable Error Status Register */
++#define PCIE_UES_R(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x104)
++#define PCIE_DATA_LINK_PROTOCOL_ERR 0x00000010 /* Data Link Protocol Error Status */
++#define PCIE_SURPRISE_DOWN_ERROR 0x00000020 /* Surprise Down Error Status */
++#define PCIE_POISONED_TLP 0x00001000 /* Poisoned TLP Status */
++#define PCIE_FC_PROTOCOL_ERR 0x00002000 /* Flow Control Protocol Error Status */
++#define PCIE_COMPLETION_TIMEOUT 0x00004000 /* Completion Timeout Status */
++#define PCIE_COMPLETOR_ABORT 0x00008000 /* Completer Abort Error */
++#define PCIE_UNEXPECTED_COMPLETION 0x00010000 /* Unexpected Completion Status */
++#define PCIE_RECEIVER_OVERFLOW 0x00020000 /* Receive Overflow Status */
++#define PCIE_MALFORNED_TLP 0x00040000 /* Malformed TLP Stauts */
++#define PCIE_ECRC_ERR 0x00080000 /* ECRC Error Stauts */
++#define PCIE_UR_REQ 0x00100000 /* Unsupported Request Error Status */
++#define PCIE_ALL_UNCORRECTABLE_ERR (PCIE_DATA_LINK_PROTOCOL_ERR | PCIE_SURPRISE_DOWN_ERROR | \
++ PCIE_POISONED_TLP | PCIE_FC_PROTOCOL_ERR | PCIE_COMPLETION_TIMEOUT | \
++ PCIE_COMPLETOR_ABORT | PCIE_UNEXPECTED_COMPLETION | PCIE_RECEIVER_OVERFLOW |\
++ PCIE_MALFORNED_TLP | PCIE_ECRC_ERR | PCIE_UR_REQ)
++
++/* Uncorrectable Error Mask Register, Mask means no report */
++#define PCIE_UEMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x108)
++
++/* Uncorrectable Error Severity Register */
++#define PCIE_UESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10C)
++
++/* Correctable Error Status Register */
++#define PCIE_CESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x110)
++#define PCIE_RX_ERR 0x00000001 /* Receive Error Status */
++#define PCIE_BAD_TLP 0x00000040 /* Bad TLP Status */
++#define PCIE_BAD_DLLP 0x00000080 /* Bad DLLP Status */
++#define PCIE_REPLAY_NUM_ROLLOVER 0x00000100 /* Replay Number Rollover Status */
++#define PCIE_REPLAY_TIMER_TIMEOUT_ERR 0x00001000 /* Reply Timer Timeout Status */
++#define PCIE_ADVISORY_NONFTAL_ERR 0x00002000 /* Advisory Non-Fatal Error Status */
++#define PCIE_CORRECTABLE_ERR (PCIE_RX_ERR | PCIE_BAD_TLP | PCIE_BAD_DLLP | PCIE_REPLAY_NUM_ROLLOVER |\
++ PCIE_REPLAY_TIMER_TIMEOUT_ERR | PCIE_ADVISORY_NONFTAL_ERR)
++
++/* Correctable Error Mask Register */
++#define PCIE_CEMR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x114)
++
++/* Advanced Error Capabilities and Control Register */
++#define PCIE_AECCR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x118)
++#define PCIE_AECCR_FIRST_ERR_PTR 0x0000001F /* First Error Pointer */
++#define PCIE_AECCR_FIRST_ERR_PTR_S 0
++#define PCIE_AECCR_ECRC_GEN_CAP 0x00000020 /* ECRC Generation Capable */
++#define PCIE_AECCR_ECRC_GEN_EN 0x00000040 /* ECRC Generation Enable */
++#define PCIE_AECCR_ECRC_CHECK_CAP 0x00000080 /* ECRC Check Capable */
++#define PCIE_AECCR_ECRC_CHECK_EN 0x00000100 /* ECRC Check Enable */
++
++/* Header Log Register 1 */
++#define PCIE_HLR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x11C)
++
++/* Header Log Register 2 */
++#define PCIE_HLR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x120)
++
++/* Header Log Register 3 */
++#define PCIE_HLR3(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x124)
++
++/* Header Log Register 4 */
++#define PCIE_HLR4(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x128)
++
++/* Root Error Command Register */
++#define PCIE_RECR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x12C)
++#define PCIE_RECR_CORRECTABLE_ERR_REPORT_EN 0x00000001 /* COR-ERR */
++#define PCIE_RECR_NONFATAL_ERR_REPORT_EN 0x00000002 /* Non-Fatal ERR */
++#define PCIE_RECR_FATAL_ERR_REPORT_EN 0x00000004 /* Fatal ERR */
++#define PCIE_RECR_ERR_REPORT_EN (PCIE_RECR_CORRECTABLE_ERR_REPORT_EN | \
++ PCIE_RECR_NONFATAL_ERR_REPORT_EN | PCIE_RECR_FATAL_ERR_REPORT_EN)
++
++/* Root Error Status Register */
++#define PCIE_RESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x130)
++#define PCIE_RESR_CORRECTABLE_ERR 0x00000001 /* COR-ERR Receveid */
++#define PCIE_RESR_MULTI_CORRECTABLE_ERR 0x00000002 /* Multiple COR-ERR Received */
++#define PCIE_RESR_FATAL_NOFATAL_ERR 0x00000004 /* ERR Fatal/Non-Fatal Received */
++#define PCIE_RESR_MULTI_FATAL_NOFATAL_ERR 0x00000008 /* Multiple ERR Fatal/Non-Fatal Received */
++#define PCIE_RESR_FIRST_UNCORRECTABLE_FATAL_ERR 0x00000010 /* First UN-COR Fatal */
++#define PCIR_RESR_NON_FATAL_ERR 0x00000020 /* Non-Fatal Error Message Received */
++#define PCIE_RESR_FATAL_ERR 0x00000040 /* Fatal Message Received */
++#define PCIE_RESR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */
++#define PCIE_RESR_AER_INT_MSG_NUM_S 27
++
++/* Error Source Indentification Register */
++#define PCIE_ESIR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x134)
++#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID 0x0000FFFF
++#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID_S 0
++#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID 0xFFFF0000
++#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID_S 16
++
++/* VC Enhanced Capability Header */
++#define PCIE_VC_ECH(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x140)
++
++/* Port VC Capability Register */
++#define PCIE_PVC1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x144)
++#define PCIE_PVC1_EXT_VC_CNT 0x00000007 /* Extended VC Count */
++#define PCIE_PVC1_EXT_VC_CNT_S 0
++#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT 0x00000070 /* Low Priority Extended VC Count */
++#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT_S 4
++#define PCIE_PVC1_REF_CLK 0x00000300 /* Reference Clock */
++#define PCIE_PVC1_REF_CLK_S 8
++#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE 0x00000C00 /* Port Arbitration Table Entry Size */
++#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE_S 10
++
++/* Extended Virtual Channel Count Defintion */
++#define PCIE_EXT_VC_CNT_MIN 0
++#define PCIE_EXT_VC_CNT_MAX 7
++
++/* Port Arbitration Table Entry Size Definition */
++enum {
++ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S1BIT = 0,
++ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S2BIT,
++ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S4BIT,
++ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S8BIT,
++};
++
++/* Port VC Capability Register 2 */
++#define PCIE_PVC2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x148)
++#define PCIE_PVC2_VC_ARB_16P_FIXED_WRR 0x00000001 /* HW Fixed arbitration, 16 phase WRR */
++#define PCIE_PVC2_VC_ARB_32P_WRR 0x00000002 /* 32 phase WRR */
++#define PCIE_PVC2_VC_ARB_64P_WRR 0x00000004 /* 64 phase WRR */
++#define PCIE_PVC2_VC_ARB_128P_WRR 0x00000008 /* 128 phase WRR */
++#define PCIE_PVC2_VC_ARB_WRR 0x0000000F
++#define PCIE_PVC2_VC_ARB_TAB_OFFSET 0xFF000000 /* VC arbitration table offset, not support */
++#define PCIE_PVC2_VC_ARB_TAB_OFFSET_S 24
++
++/* Port VC Control and Status Register */
++#define PCIE_PVCCRSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14C)
++#define PCIE_PVCCRSR_LOAD_VC_ARB_TAB 0x00000001 /* Load VC Arbitration Table */
++#define PCIE_PVCCRSR_VC_ARB_SEL 0x0000000E /* VC Arbitration Select */
++#define PCIE_PVCCRSR_VC_ARB_SEL_S 1
++#define PCIE_PVCCRSR_VC_ARB_TAB_STATUS 0x00010000 /* Arbitration Status */
++
++/* VC0 Resource Capability Register */
++#define PCIE_VC0_RC(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x150)
++#define PCIE_VC0_RC_PORT_ARB_HW_FIXED 0x00000001 /* HW Fixed arbitration */
++#define PCIE_VC0_RC_PORT_ARB_32P_WRR 0x00000002 /* 32 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB_64P_WRR 0x00000004 /* 64 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB_128P_WRR 0x00000008 /* 128 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB_TM_128P_WRR 0x00000010 /* Time-based 128 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB_TM_256P_WRR 0x00000020 /* Time-based 256 phase WRR */
++#define PCIE_VC0_RC_PORT_ARB (PCIE_VC0_RC_PORT_ARB_HW_FIXED | PCIE_VC0_RC_PORT_ARB_32P_WRR |\
++ PCIE_VC0_RC_PORT_ARB_64P_WRR | PCIE_VC0_RC_PORT_ARB_128P_WRR | \
++ PCIE_VC0_RC_PORT_ARB_TM_128P_WRR | PCIE_VC0_RC_PORT_ARB_TM_256P_WRR)
++
++#define PCIE_VC0_RC_REJECT_SNOOP 0x00008000 /* Reject Snoop Transactioin */
++#define PCIE_VC0_RC_MAX_TIMESLOTS 0x007F0000 /* Maximum time Slots */
++#define PCIE_VC0_RC_MAX_TIMESLOTS_S 16
++#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET 0xFF000000 /* Port Arbitration Table Offset */
++#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET_S 24
++
++/* VC0 Resource Control Register */
++#define PCIE_VC0_RC0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x154)
++#define PCIE_VC0_RC0_TVM0 0x00000001 /* TC0 and VC0 */
++#define PCIE_VC0_RC0_TVM1 0x00000002 /* TC1 and VC1 */
++#define PCIE_VC0_RC0_TVM2 0x00000004 /* TC2 and VC2 */
++#define PCIE_VC0_RC0_TVM3 0x00000008 /* TC3 and VC3 */
++#define PCIE_VC0_RC0_TVM4 0x00000010 /* TC4 and VC4 */
++#define PCIE_VC0_RC0_TVM5 0x00000020 /* TC5 and VC5 */
++#define PCIE_VC0_RC0_TVM6 0x00000040 /* TC6 and VC6 */
++#define PCIE_VC0_RC0_TVM7 0x00000080 /* TC7 and VC7 */
++#define PCIE_VC0_RC0_TC_VC 0x000000FF /* TC/VC mask */
++
++#define PCIE_VC0_RC0_LOAD_PORT_ARB_TAB 0x00010000 /* Load Port Arbitration Table */
++#define PCIE_VC0_RC0_PORT_ARB_SEL 0x000E0000 /* Port Arbitration Select */
++#define PCIE_VC0_RC0_PORT_ARB_SEL_S 17
++#define PCIE_VC0_RC0_VC_ID 0x07000000 /* VC ID */
++#define PCIE_VC0_RC0_VC_ID_S 24
++#define PCIE_VC0_RC0_VC_EN 0x80000000 /* VC Enable */
++
++/* VC0 Resource Status Register */
++#define PCIE_VC0_RSR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x158)
++#define PCIE_VC0_RSR0_PORT_ARB_TAB_STATUS 0x00010000 /* Port Arbitration Table Status,not used */
++#define PCIE_VC0_RSR0_VC_NEG_PENDING 0x00020000 /* VC Negotiation Pending */
++
++/* Ack Latency Timer and Replay Timer Register */
++#define PCIE_ALTRT(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x700)
++#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT 0x0000FFFF /* Round Trip Latency Time Limit */
++#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT_S 0
++#define PCIE_ALTRT_REPLAY_TIME_LIMIT 0xFFFF0000 /* Replay Time Limit */
++#define PCIE_ALTRT_REPLAY_TIME_LIMIT_S 16
++
++/* Other Message Register */
++#define PCIE_OMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x704)
++
++/* Port Force Link Register */
++#define PCIE_PFLR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x708)
++#define PCIE_PFLR_LINK_NUM 0x000000FF /* Link Number */
++#define PCIE_PFLR_LINK_NUM_S 0
++#define PCIE_PFLR_FORCE_LINK 0x00008000 /* Force link */
++#define PCIE_PFLR_LINK_STATE 0x003F0000 /* Link State */
++#define PCIE_PFLR_LINK_STATE_S 16
++#define PCIE_PFLR_LOW_POWER_ENTRY_CNT 0xFF000000 /* Low Power Entrance Count, only for EP */
++#define PCIE_PFLR_LOW_POWER_ENTRY_CNT_S 24
++
++/* Ack Frequency Register */
++#define PCIE_AFR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70C)
++#define PCIE_AFR_AF 0x000000FF /* Ack Frequency */
++#define PCIE_AFR_AF_S 0
++#define PCIE_AFR_FTS_NUM 0x0000FF00 /* The number of Fast Training Sequence from L0S to L0 */
++#define PCIE_AFR_FTS_NUM_S 8
++#define PCIE_AFR_COM_FTS_NUM 0x00FF0000 /* N_FTS; when common clock is used*/
++#define PCIE_AFR_COM_FTS_NUM_S 16
++#define PCIE_AFR_L0S_ENTRY_LATENCY 0x07000000 /* L0s Entrance Latency */
++#define PCIE_AFR_L0S_ENTRY_LATENCY_S 24
++#define PCIE_AFR_L1_ENTRY_LATENCY 0x38000000 /* L1 Entrance Latency */
++#define PCIE_AFR_L1_ENTRY_LATENCY_S 27
++#define PCIE_AFR_FTS_NUM_DEFAULT 32
++#define PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT 7
++#define PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT 5
++
++/* Port Link Control Register */
++#define PCIE_PLCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x710)
++#define PCIE_PLCR_OTHER_MSG_REQ 0x00000001 /* Other Message Request */
++#define PCIE_PLCR_SCRAMBLE_DISABLE 0x00000002 /* Scramble Disable */
++#define PCIE_PLCR_LOOPBACK_EN 0x00000004 /* Loopback Enable */
++#define PCIE_PLCR_LTSSM_HOT_RST 0x00000008 /* Force LTSSM to the hot reset */
++#define PCIE_PLCR_DLL_LINK_EN 0x00000020 /* Enable Link initialization */
++#define PCIE_PLCR_FAST_LINK_SIM_EN 0x00000080 /* Sets all internal timers to fast mode for simulation purposes */
++#define PCIE_PLCR_LINK_MODE 0x003F0000 /* Link Mode Enable Mask */
++#define PCIE_PLCR_LINK_MODE_S 16
++#define PCIE_PLCR_CORRUPTED_CRC_EN 0x02000000 /* Enabled Corrupt CRC */
++
++/* Lane Skew Register */
++#define PCIE_LSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x714)
++#define PCIE_LSR_LANE_SKEW_NUM 0x00FFFFFF /* Insert Lane Skew for Transmit, not applicable */
++#define PCIE_LSR_LANE_SKEW_NUM_S 0
++#define PCIE_LSR_FC_DISABLE 0x01000000 /* Disable of Flow Control */
++#define PCIE_LSR_ACKNAK_DISABLE 0x02000000 /* Disable of Ack/Nak */
++#define PCIE_LSR_LANE_DESKEW_DISABLE 0x80000000 /* Disable of Lane-to-Lane Skew */
++
++/* Symbol Number Register */
++#define PCIE_SNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x718)
++#define PCIE_SNR_TS 0x0000000F /* Number of TS Symbol */
++#define PCIE_SNR_TS_S 0
++#define PCIE_SNR_SKP 0x00000700 /* Number of SKP Symbol */
++#define PCIE_SNR_SKP_S 8
++#define PCIE_SNR_REPLAY_TIMER 0x0007C000 /* Timer Modifier for Replay Timer */
++#define PCIE_SNR_REPLAY_TIMER_S 14
++#define PCIE_SNR_ACKNAK_LATENCY_TIMER 0x00F80000 /* Timer Modifier for Ack/Nak Latency Timer */
++#define PCIE_SNR_ACKNAK_LATENCY_TIMER_S 19
++#define PCIE_SNR_FC_TIMER 0x1F000000 /* Timer Modifier for Flow Control Watchdog Timer */
++#define PCIE_SNR_FC_TIMER_S 28
++
++/* Symbol Timer Register and Filter Mask Register 1 */
++#define PCIE_STRFMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x71C)
++#define PCIE_STRFMR_SKP_INTERVAL 0x000007FF /* SKP lnterval Value */
++#define PCIE_STRFMR_SKP_INTERVAL_S 0
++#define PCIE_STRFMR_FC_WDT_DISABLE 0x00008000 /* Disable of FC Watchdog Timer */
++#define PCIE_STRFMR_TLP_FUNC_MISMATCH_OK 0x00010000 /* Mask Function Mismatch Filtering for Incoming Requests */
++#define PCIE_STRFMR_POISONED_TLP_OK 0x00020000 /* Mask Poisoned TLP Filtering */
++#define PCIE_STRFMR_BAR_MATCH_OK 0x00040000 /* Mask BAR Match Filtering */
++#define PCIE_STRFMR_TYPE1_CFG_REQ_OK 0x00080000 /* Mask Type 1 Configuration Request Filtering */
++#define PCIE_STRFMR_LOCKED_REQ_OK 0x00100000 /* Mask Locked Request Filtering */
++#define PCIE_STRFMR_CPL_TAG_ERR_RULES_OK 0x00200000 /* Mask Tag Error Rules for Received Completions */
++#define PCIE_STRFMR_CPL_REQUESTOR_ID_MISMATCH_OK 0x00400000 /* Mask Requester ID Mismatch Error for Received Completions */
++#define PCIE_STRFMR_CPL_FUNC_MISMATCH_OK 0x00800000 /* Mask Function Mismatch Error for Received Completions */
++#define PCIE_STRFMR_CPL_TC_MISMATCH_OK 0x01000000 /* Mask Traffic Class Mismatch Error for Received Completions */
++#define PCIE_STRFMR_CPL_ATTR_MISMATCH_OK 0x02000000 /* Mask Attribute Mismatch Error for Received Completions */
++#define PCIE_STRFMR_CPL_LENGTH_MISMATCH_OK 0x04000000 /* Mask Length Mismatch Error for Received Completions */
++#define PCIE_STRFMR_TLP_ECRC_ERR_OK 0x08000000 /* Mask ECRC Error Filtering */
++#define PCIE_STRFMR_CPL_TLP_ECRC_OK 0x10000000 /* Mask ECRC Error Filtering for Completions */
++#define PCIE_STRFMR_RX_TLP_MSG_NO_DROP 0x20000000 /* Send Message TLPs */
++#define PCIE_STRFMR_RX_IO_TRANS_ENABLE 0x40000000 /* Mask Filtering of received I/O Requests */
++#define PCIE_STRFMR_RX_CFG_TRANS_ENABLE 0x80000000 /* Mask Filtering of Received Configuration Requests */
++
++#define PCIE_DEF_SKP_INTERVAL 700 /* 1180 ~1538 , 125MHz * 2, 250MHz * 1 */
++
++/* Filter Masker Register 2 */
++#define PCIE_FMR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x720)
++#define PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1 0x00000001 /* Mask RADM Filtering and Error Handling Rules */
++#define PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 0x00000002 /* Mask RADM Filtering and Error Handling Rules */
++
++/* Debug Register 0 */
++#define PCIE_DBR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x728)
++
++/* Debug Register 1 */
++#define PCIE_DBR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x72C)
++
++/* Transmit Posted FC Credit Status Register */
++#define PCIE_TPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x730)
++#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS 0x00000FFF /* Transmit Posted Data FC Credits */
++#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS_S 0
++#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS 0x000FF000 /* Transmit Posted Header FC Credits */
++#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS_S 12
++
++/* Transmit Non-Posted FC Credit Status */
++#define PCIE_TNPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x734)
++#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS 0x00000FFF /* Transmit Non-Posted Data FC Credits */
++#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS_S 0
++#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS 0x000FF000 /* Transmit Non-Posted Header FC Credits */
++#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS_S 12
++
++/* Transmit Complete FC Credit Status Register */
++#define PCIE_TCFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x738)
++#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS 0x00000FFF /* Transmit Completion Data FC Credits */
++#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS_S 0
++#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS 0x000FF000 /* Transmit Completion Header FC Credits */
++#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS_S 12
++
++/* Queue Status Register */
++#define PCIE_QSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x73C)
++#define PCIE_QSR_WAIT_UPDATE_FC_DLL 0x00000001 /* Received TLP FC Credits Not Returned */
++#define PCIE_QSR_TX_RETRY_BUF_NOT_EMPTY 0x00000002 /* Transmit Retry Buffer Not Empty */
++#define PCIE_QSR_RX_QUEUE_NOT_EMPTY 0x00000004 /* Received Queue Not Empty */
++
++/* VC Transmit Arbitration Register 1 */
++#define PCIE_VCTAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x740)
++#define PCIE_VCTAR1_WRR_WEIGHT_VC0 0x000000FF /* WRR Weight for VC0 */
++#define PCIE_VCTAR1_WRR_WEIGHT_VC1 0x0000FF00 /* WRR Weight for VC1 */
++#define PCIE_VCTAR1_WRR_WEIGHT_VC2 0x00FF0000 /* WRR Weight for VC2 */
++#define PCIE_VCTAR1_WRR_WEIGHT_VC3 0xFF000000 /* WRR Weight for VC3 */
++
++/* VC Transmit Arbitration Register 2 */
++#define PCIE_VCTAR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x744)
++#define PCIE_VCTAR2_WRR_WEIGHT_VC4 0x000000FF /* WRR Weight for VC4 */
++#define PCIE_VCTAR2_WRR_WEIGHT_VC5 0x0000FF00 /* WRR Weight for VC5 */
++#define PCIE_VCTAR2_WRR_WEIGHT_VC6 0x00FF0000 /* WRR Weight for VC6 */
++#define PCIE_VCTAR2_WRR_WEIGHT_VC7 0xFF000000 /* WRR Weight for VC7 */
++
++/* VC0 Posted Receive Queue Control Register */
++#define PCIE_VC0_PRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x748)
++#define PCIE_VC0_PRQCR_P_DATA_CREDITS 0x00000FFF /* VC0 Posted Data Credits */
++#define PCIE_VC0_PRQCR_P_DATA_CREDITS_S 0
++#define PCIE_VC0_PRQCR_P_HDR_CREDITS 0x000FF000 /* VC0 Posted Header Credits */
++#define PCIE_VC0_PRQCR_P_HDR_CREDITS_S 12
++#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE 0x00E00000 /* VC0 Posted TLP Queue Mode */
++#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE_S 20
++#define PCIE_VC0_PRQCR_TLP_RELAX_ORDER 0x40000000 /* TLP Type Ordering for VC0 */
++#define PCIE_VC0_PRQCR_VC_STRICT_ORDER 0x80000000 /* VC0 Ordering for Receive Queues */
++
++/* VC0 Non-Posted Receive Queue Control */
++#define PCIE_VC0_NPRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74C)
++#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS 0x00000FFF /* VC0 Non-Posted Data Credits */
++#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS_S 0
++#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS 0x000FF000 /* VC0 Non-Posted Header Credits */
++#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS_S 12
++#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE 0x00E00000 /* VC0 Non-Posted TLP Queue Mode */
++#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE_S 20
++
++/* VC0 Completion Receive Queue Control */
++#define PCIE_VC0_CRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x750)
++#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS 0x00000FFF /* VC0 Completion TLP Queue Mode */
++#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS_S 0
++#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS 0x000FF000 /* VC0 Completion Header Credits */
++#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS_S 12
++#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE 0x00E00000 /* VC0 Completion Data Credits */
++#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE_S 21
++
++/* Applicable to the above three registers */
++enum {
++ PCIE_VC0_TLP_QUEUE_MODE_STORE_FORWARD = 1,
++ PCIE_VC0_TLP_QUEUE_MODE_CUT_THROUGH = 2,
++ PCIE_VC0_TLP_QUEUE_MODE_BYPASS = 4,
++};
++
++/* VC0 Posted Buffer Depth Register */
++#define PCIE_VC0_PBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7A8)
++#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Posted Data Queue Depth */
++#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES_S 0
++#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Posted Header Queue Depth */
++#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES_S 16
++
++/* VC0 Non-Posted Buffer Depth Register */
++#define PCIE_VC0_NPBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7AC)
++#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Non-Posted Data Queue Depth */
++#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES_S 0
++#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Non-Posted Header Queue Depth */
++#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES_S 16
++
++/* VC0 Completion Buffer Depth Register */
++#define PCIE_VC0_CBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7B0)
++#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES 0x00003FFF /* C0 Completion Data Queue Depth */
++#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES_S 0
++#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Completion Header Queue Depth */
++#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES_S 16
++
++/* PHY Status Register, all zeros in VR9 */
++#define PCIE_PHYSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x810)
++
++/* PHY Control Register, all zeros in VR9 */
++#define PCIE_PHYCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x814)
++
++/*
++ * PCIe PDI PHY register definition, suppose all the following
++ * stuff is confidential.
++ * XXX, detailed bit definition
++ */
++#define PCIE_PHY_PLL_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x22 << 1))
++#define PCIE_PHY_PLL_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x23 << 1))
++#define PCIE_PHY_PLL_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x24 << 1))
++#define PCIE_PHY_PLL_CTRL4(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x25 << 1))
++#define PCIE_PHY_PLL_CTRL5(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x26 << 1))
++#define PCIE_PHY_PLL_CTRL6(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x27 << 1))
++#define PCIE_PHY_PLL_CTRL7(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x28 << 1))
++#define PCIE_PHY_PLL_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x29 << 1))
++#define PCIE_PHY_PLL_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2A << 1))
++#define PCIE_PHY_PLL_A_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2B << 1))
++#define PCIE_PHY_PLL_STATUS(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2C << 1))
++
++#define PCIE_PHY_TX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x30 << 1))
++#define PCIE_PHY_TX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x31 << 1))
++#define PCIE_PHY_TX1_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x32 << 1))
++#define PCIE_PHY_TX1_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x33 << 1))
++#define PCIE_PHY_TX1_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x34 << 1))
++#define PCIE_PHY_TX1_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x35 << 1))
++#define PCIE_PHY_TX1_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x36 << 1))
++#define PCIE_PHY_TX1_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x37 << 1))
++
++#define PCIE_PHY_TX2_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x38 << 1))
++#define PCIE_PHY_TX2_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x39 << 1))
++#define PCIE_PHY_TX2_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3B << 1))
++#define PCIE_PHY_TX2_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3C << 1))
++#define PCIE_PHY_TX2_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3D << 1))
++#define PCIE_PHY_TX2_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3E << 1))
++#define PCIE_PHY_TX2_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3F << 1))
++
++#define PCIE_PHY_RX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x50 << 1))
++#define PCIE_PHY_RX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x51 << 1))
++#define PCIE_PHY_RX1_CDR(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x52 << 1))
++#define PCIE_PHY_RX1_EI(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x53 << 1))
++#define PCIE_PHY_RX1_A_CTRL(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x55 << 1))
++
++/* Interrupt related stuff */
++#define PCIE_LEGACY_DISABLE 0
++#define PCIE_LEGACY_INTA 1
++#define PCIE_LEGACY_INTB 2
++#define PCIE_LEGACY_INTC 3
++#define PCIE_LEGACY_INTD 4
++#define PCIE_LEGACY_INT_MAX PCIE_LEGACY_INTD
++
++#define PCIE_IRQ_LOCK(lock) do { \
++ unsigned long flags; \
++ spin_lock_irqsave(&(lock), flags);
++#define PCIE_IRQ_UNLOCK(lock) \
++ spin_unlock_irqrestore(&(lock), flags); \
++} while (0)
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)
++#define IRQF_SHARED SA_SHIRQ
++#endif
++
++#define PCIE_MSG_MSI 0x00000001
++#define PCIE_MSG_ISR 0x00000002
++#define PCIE_MSG_FIXUP 0x00000004
++#define PCIE_MSG_READ_CFG 0x00000008
++#define PCIE_MSG_WRITE_CFG 0x00000010
++#define PCIE_MSG_CFG (PCIE_MSG_READ_CFG | PCIE_MSG_WRITE_CFG)
++#define PCIE_MSG_REG 0x00000020
++#define PCIE_MSG_INIT 0x00000040
++#define PCIE_MSG_ERR 0x00000080
++#define PCIE_MSG_PHY 0x00000100
++#define PCIE_MSG_ANY 0x000001ff
++
++#define IFX_PCIE_PORT0 0
++#define IFX_PCIE_PORT1 1
++
++#ifdef CONFIG_IFX_PCIE_2ND_CORE
++#define IFX_PCIE_CORE_NR 2
++#else
++#define IFX_PCIE_CORE_NR 1
++#endif
++
++//#define IFX_PCIE_ERROR_INT
++
++//#define IFX_PCIE_DBG
++
++#if defined(IFX_PCIE_DBG)
++#define IFX_PCIE_PRINT(_m, _fmt, args...) do { \
++ if (g_pcie_debug_flag & (_m)) { \
++ ifx_pcie_debug((_fmt), ##args); \
++ } \
++} while (0)
++
++#define INLINE
++#else
++#define IFX_PCIE_PRINT(_m, _fmt, args...) \
++ do {} while(0)
++#define INLINE inline
++#endif
++
++struct ifx_pci_controller {
++ struct pci_controller pcic;
++
++ /* RC specific, per host bus information */
++ u32 port; /* Port index, 0 -- 1st core, 1 -- 2nd core */
++};
++
++typedef struct ifx_pcie_ir_irq {
++ const unsigned int irq;
++ const char name[16];
++}ifx_pcie_ir_irq_t;
++
++typedef struct ifx_pcie_legacy_irq{
++ const u32 irq_bit;
++ const int irq;
++}ifx_pcie_legacy_irq_t;
++
++typedef struct ifx_pcie_irq {
++ ifx_pcie_ir_irq_t ir_irq;
++ ifx_pcie_legacy_irq_t legacy_irq[PCIE_LEGACY_INT_MAX];
++}ifx_pcie_irq_t;
++
++extern u32 g_pcie_debug_flag;
++extern void ifx_pcie_debug(const char *fmt, ...);
++extern void pcie_phy_clock_mode_setup(int pcie_port);
++extern void pcie_msi_pic_init(int pcie_port);
++extern u32 ifx_pcie_bus_enum_read_hack(int where, u32 value);
++extern u32 ifx_pcie_bus_enum_write_hack(int where, u32 value);
++
++
++#include <linux/types.h>
++#include <linux/delay.h>
++#include <linux/gpio.h>
++#include <linux/clk.h>
++
++#include <lantiq_soc.h>
++
++#define IFX_PCIE_GPIO_RESET 38
++#define IFX_REG_R32 ltq_r32
++#define IFX_REG_W32 ltq_w32
++#define CONFIG_IFX_PCIE_HW_SWAP
++#define IFX_RCU_AHB_ENDIAN ((volatile u32*)(IFX_RCU + 0x004C))
++#define IFX_RCU_RST_REQ ((volatile u32*)(IFX_RCU + 0x0010))
++#define IFX_RCU_AHB_BE_PCIE_PDI 0x00000080 /* Configure PCIE PDI module in big endian*/
++
++#define IFX_RCU (KSEG1 | 0x1F203000)
++#define IFX_RCU_AHB_BE_PCIE_M 0x00000001 /* Configure AHB master port that connects to PCIe RC in big endian */
++#define IFX_RCU_AHB_BE_PCIE_S 0x00000010 /* Configure AHB slave port that connects to PCIe RC in little endian */
++#define IFX_RCU_AHB_BE_XBAR_M 0x00000002 /* Configure AHB master port that connects to XBAR in big endian */
++#define CONFIG_IFX_PCIE_PHY_36MHZ_MODE
++
++#define IFX_PMU1_MODULE_PCIE_PHY (0)
++#define IFX_PMU1_MODULE_PCIE_CTRL (1)
++#define IFX_PMU1_MODULE_PDI (4)
++#define IFX_PMU1_MODULE_MSI (5)
++
++#define IFX_PMU_MODULE_PCIE_L0_CLK (31)
++
++
++static inline void pcie_ep_gpio_rst_init(int pcie_port)
++{
++}
++
++static inline void pcie_ahb_pmu_setup(void)
++{
++ struct clk *clk;
++ clk = clk_get_sys("ltq_pcie", "ahb");
++ clk_enable(clk);
++ //ltq_pmu_enable(PMU_AHBM | PMU_AHBS);
++}
++
++static inline void pcie_rcu_endian_setup(int pcie_port)
++{
++ u32 reg;
++
++ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
++#ifdef CONFIG_IFX_PCIE_HW_SWAP
++ reg |= IFX_RCU_AHB_BE_PCIE_M;
++ reg |= IFX_RCU_AHB_BE_PCIE_S;
++ reg &= ~IFX_RCU_AHB_BE_XBAR_M;
++#else
++ reg |= IFX_RCU_AHB_BE_PCIE_M;
++ reg &= ~IFX_RCU_AHB_BE_PCIE_S;
++ reg &= ~IFX_RCU_AHB_BE_XBAR_M;
++#endif /* CONFIG_IFX_PCIE_HW_SWAP */
++ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN));
++}
++
++static inline void pcie_phy_pmu_enable(int pcie_port)
++{
++ struct clk *clk;
++ clk = clk_get_sys("ltq_pcie", "phy");
++ clk_enable(clk);
++ //ltq_pmu1_enable(1<<IFX_PMU1_MODULE_PCIE_PHY);
++}
++
++static inline void pcie_phy_pmu_disable(int pcie_port)
++{
++ struct clk *clk;
++ clk = clk_get_sys("ltq_pcie", "phy");
++ clk_disable(clk);
++ //ltq_pmu1_disable(1<<IFX_PMU1_MODULE_PCIE_PHY);
++}
++
++static inline void pcie_pdi_big_endian(int pcie_port)
++{
++ u32 reg;
++
++ /* SRAM2PDI endianness control. */
++ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
++ /* Config AHB->PCIe and PDI endianness */
++ reg |= IFX_RCU_AHB_BE_PCIE_PDI;
++ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
++}
++
++static inline void pcie_pdi_pmu_enable(int pcie_port)
++{
++ struct clk *clk;
++ clk = clk_get_sys("ltq_pcie", "pdi");
++ clk_enable(clk);
++ //ltq_pmu1_enable(1<<IFX_PMU1_MODULE_PDI);
++}
++
++static inline void pcie_core_rst_assert(int pcie_port)
++{
++ u32 reg;
++
++ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++
++ /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly */
++ reg |= 0x00400000;
++ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_core_rst_deassert(int pcie_port)
++{
++ u32 reg;
++
++ /* Make sure one micro-second delay */
++ udelay(1);
++
++ /* Reset PCIe PHY & Core, bit 22 */
++ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++ reg &= ~0x00400000;
++ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_phy_rst_assert(int pcie_port)
++{
++ u32 reg;
++
++ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++ reg |= 0x00001000; /* Bit 12 */
++ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_phy_rst_deassert(int pcie_port)
++{
++ u32 reg;
++
++ /* Make sure one micro-second delay */
++ udelay(1);
++
++ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
++ reg &= ~0x00001000; /* Bit 12 */
++ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
++}
++
++static inline void pcie_device_rst_assert(int pcie_port)
++{
++ gpio_set_value(IFX_PCIE_GPIO_RESET, 0);
++ // ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
++}
++
++static inline void pcie_device_rst_deassert(int pcie_port)
++{
++ mdelay(100);
++ gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
++// ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
++}
++
++static inline void pcie_core_pmu_setup(int pcie_port)
++{
++ struct clk *clk;
++ clk = clk_get_sys("ltq_pcie", "ctl");
++ clk_enable(clk);
++ clk = clk_get_sys("ltq_pcie", "bus");
++ clk_enable(clk);
++
++ //ltq_pmu1_enable(1 << IFX_PMU1_MODULE_PCIE_CTRL);
++ //ltq_pmu_enable(1 << IFX_PMU_MODULE_PCIE_L0_CLK);
++}
++
++static inline void pcie_msi_init(int pcie_port)
++{
++ struct clk *clk;
++ pcie_msi_pic_init(pcie_port);
++ clk = clk_get_sys("ltq_pcie", "msi");
++ clk_enable(clk);
++ //ltq_pmu1_enable(1 << IFX_PMU1_MODULE_MSI);
++}
++
++static inline u32
++ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port)
++{
++ u32 tbus_number = bus_number;
++
++#ifdef CONFIG_IFX_PCI
++ if (pcibios_host_nr() > 1) {
++ tbus_number -= pcibios_1st_host_bus_nr();
++ }
++#endif /* CONFIG_IFX_PCI */
++ return tbus_number;
++}
++
++static inline u32
++ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read)
++{
++ struct pci_dev *pdev;
++ u32 tvalue = value;
++
++ /* Sanity check */
++ pdev = pci_get_slot(bus, devfn);
++ if (pdev == NULL) {
++ return tvalue;
++ }
++
++ /* Only care about PCI bridge */
++ if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
++ return tvalue;
++ }
++
++ if (read) { /* Read hack */
++ #ifdef CONFIG_IFX_PCI
++ if (pcibios_host_nr() > 1) {
++ tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue);
++ }
++ #endif /* CONFIG_IFX_PCI */
++ }
++ else { /* Write hack */
++ #ifdef CONFIG_IFX_PCI
++ if (pcibios_host_nr() > 1) {
++ tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue);
++ }
++ #endif
++ }
++ return tvalue;
++}
++
++#endif /* IFXMIPS_PCIE_VR9_H */
++
+--
+1.7.9.1
+
--- /dev/null
+From bc45b5c61ffb156eb01515bf56efc5ae8d2bc3b2 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 13 Aug 2011 13:59:50 +0200
+Subject: [PATCH 55/73] MIPS: lantiq: make GPIO3 work on AR9
+
+There are 3 16bit and 1 8bit gpio ports on AR9. The gpio driver needs a hack
+at 2 places to make the different register layout of the GPIO3 work properly
+with the driver. Before only GPIO0-2 were supported. As the GPIO number scheme
+clashes with the new size, we also move the other gpio chips to new offsets.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 2 +
+ arch/mips/lantiq/xway/devices.c | 3 +
+ arch/mips/lantiq/xway/gpio.c | 84 ++++++++++++++++----
+ arch/mips/lantiq/xway/gpio_ebu.c | 3 +-
+ arch/mips/lantiq/xway/gpio_stp.c | 3 +-
+ 5 files changed, 75 insertions(+), 20 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index d1b8cc8..bfdeb16 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -126,7 +126,9 @@
+ #define LTQ_GPIO0_BASE_ADDR 0x1E100B10
+ #define LTQ_GPIO1_BASE_ADDR 0x1E100B40
+ #define LTQ_GPIO2_BASE_ADDR 0x1E100B70
++#define LTQ_GPIO3_BASE_ADDR 0x1E100BA0
+ #define LTQ_GPIO_SIZE 0x30
++#define LTQ_GPIO3_SIZE 0x10
+
+ /* SSC */
+ #define LTQ_SSC_BASE_ADDR 0x1e100800
+diff --git a/arch/mips/lantiq/xway/devices.c b/arch/mips/lantiq/xway/devices.c
+index 5efa4f3..e6d45bc 100644
+--- a/arch/mips/lantiq/xway/devices.c
++++ b/arch/mips/lantiq/xway/devices.c
+@@ -34,6 +34,7 @@ static struct resource ltq_gpio_resource[] = {
+ MEM_RES("gpio0", LTQ_GPIO0_BASE_ADDR, LTQ_GPIO_SIZE),
+ MEM_RES("gpio1", LTQ_GPIO1_BASE_ADDR, LTQ_GPIO_SIZE),
+ MEM_RES("gpio2", LTQ_GPIO2_BASE_ADDR, LTQ_GPIO_SIZE),
++ MEM_RES("gpio3", LTQ_GPIO3_BASE_ADDR, LTQ_GPIO3_SIZE),
+ };
+
+ void __init ltq_register_gpio(void)
+@@ -47,6 +48,8 @@ void __init ltq_register_gpio(void)
+ if (ltq_is_ar9() || ltq_is_vr9()) {
+ platform_device_register_simple("ltq_gpio", 2,
+ <q_gpio_resource[2], 1);
++ platform_device_register_simple("ltq_gpio", 3,
++ <q_gpio_resource[3], 1);
+ }
+ }
+
+diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c
+index 54ec6c9..375329b 100644
+--- a/arch/mips/lantiq/xway/gpio.c
++++ b/arch/mips/lantiq/xway/gpio.c
+@@ -23,9 +23,17 @@
+ #define LTQ_GPIO_OD 0x14
+ #define LTQ_GPIO_PUDSEL 0x1C
+ #define LTQ_GPIO_PUDEN 0x20
++#define LTQ_GPIO3_OD 0x24
++#define LTQ_GPIO3_ALTSEL1 0x24
++#define LTQ_GPIO3_PUDSEL 0x28
++#define LTQ_GPIO3_PUDEN 0x2C
+
++/* PORT3 only has 8 pins and its register layout
++ is slightly different */
+ #define PINS_PER_PORT 16
+-#define MAX_PORTS 3
++#define PINS_PORT3 8
++#define MAX_PORTS 4
++#define MAX_PIN 56
+
+ #define ltq_gpio_getbit(m, r, p) (!!(ltq_r32(m + r) & (1 << p)))
+ #define ltq_gpio_setbit(m, r, p) ltq_w32_mask(0, (1 << p), m + r)
+@@ -55,7 +63,7 @@ int ltq_gpio_request(struct device *dev, unsigned int pin, unsigned int mux,
+ {
+ int id = 0;
+
+- if (pin >= (MAX_PORTS * PINS_PER_PORT))
++ if (pin >= MAX_PIN)
+ return -EINVAL;
+ if (devm_gpio_request(dev, pin, name)) {
+ pr_err("failed to setup lantiq gpio: %s\n", name);
+@@ -75,12 +83,21 @@ int ltq_gpio_request(struct device *dev, unsigned int pin, unsigned int mux,
+ else
+ ltq_gpio_clearbit(ltq_gpio_port[id].membase,
+ LTQ_GPIO_ALTSEL0, pin);
+- if (mux & 0x1)
+- ltq_gpio_setbit(ltq_gpio_port[id].membase,
+- LTQ_GPIO_ALTSEL1, pin);
+- else
+- ltq_gpio_clearbit(ltq_gpio_port[id].membase,
+- LTQ_GPIO_ALTSEL1, pin);
++ if (id == 3) {
++ if (mux & 0x1)
++ ltq_gpio_setbit(ltq_gpio_port[1].membase,
++ LTQ_GPIO3_ALTSEL1, pin);
++ else
++ ltq_gpio_clearbit(ltq_gpio_port[1].membase,
++ LTQ_GPIO3_ALTSEL1, pin);
++ } else {
++ if (mux & 0x1)
++ ltq_gpio_setbit(ltq_gpio_port[id].membase,
++ LTQ_GPIO_ALTSEL1, pin);
++ else
++ ltq_gpio_clearbit(ltq_gpio_port[id].membase,
++ LTQ_GPIO_ALTSEL1, pin);
++ }
+ return 0;
+ }
+ EXPORT_SYMBOL(ltq_gpio_request);
+@@ -106,10 +123,19 @@ static int ltq_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
+ {
+ struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+- ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
++ if (chip->ngpio == PINS_PORT3) {
++ ltq_gpio_clearbit(ltq_gpio_port[0].membase,
++ LTQ_GPIO3_OD, offset);
++ ltq_gpio_setbit(ltq_gpio_port[0].membase,
++ LTQ_GPIO3_PUDSEL, offset);
++ ltq_gpio_setbit(ltq_gpio_port[0].membase,
++ LTQ_GPIO3_PUDEN, offset);
++ } else {
++ ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
++ ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_PUDSEL, offset);
++ ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_PUDEN, offset);
++ }
+ ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset);
+- ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_PUDSEL, offset);
+- ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_PUDEN, offset);
+
+ return 0;
+ }
+@@ -119,10 +145,19 @@ static int ltq_gpio_direction_output(struct gpio_chip *chip,
+ {
+ struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+- ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
++ if (chip->ngpio == PINS_PORT3) {
++ ltq_gpio_setbit(ltq_gpio_port[0].membase,
++ LTQ_GPIO3_OD, offset);
++ ltq_gpio_clearbit(ltq_gpio_port[0].membase,
++ LTQ_GPIO3_PUDSEL, offset);
++ ltq_gpio_clearbit(ltq_gpio_port[0].membase,
++ LTQ_GPIO3_PUDEN, offset);
++ } else {
++ ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
++ ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_PUDSEL, offset);
++ ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_PUDEN, offset);
++ }
+ ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset);
+- ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_PUDSEL, offset);
+- ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_PUDEN, offset);
+ ltq_gpio_set(chip, offset, value);
+
+ return 0;
+@@ -133,7 +168,11 @@ static int ltq_gpio_req(struct gpio_chip *chip, unsigned offset)
+ struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+ ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL0, offset);
+- ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL1, offset);
++ if (chip->ngpio == PINS_PORT3)
++ ltq_gpio_clearbit(ltq_gpio_port[1].membase,
++ LTQ_GPIO3_ALTSEL1, offset);
++ else
++ ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL1, offset);
+ return 0;
+ }
+
+@@ -146,6 +185,16 @@ static int ltq_gpio_probe(struct platform_device *pdev)
+ pdev->id);
+ return -EINVAL;
+ }
++
++ /* dirty hack - The registers of port3 are not mapped linearly.
++ Port 3 may only load if Port 1/2 are mapped */
++ if ((pdev->id == 3) && (!ltq_gpio_port[1].membase
++ || !ltq_gpio_port[2].membase)) {
++ dev_err(&pdev->dev,
++ "ports 1/2 need to be loaded before port 3 works\n");
++ return -ENOMEM;
++ }
++
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to get memory for gpio port %d\n",
+@@ -175,7 +224,10 @@ static int ltq_gpio_probe(struct platform_device *pdev)
+ ltq_gpio_port[pdev->id].chip.set = ltq_gpio_set;
+ ltq_gpio_port[pdev->id].chip.request = ltq_gpio_req;
+ ltq_gpio_port[pdev->id].chip.base = PINS_PER_PORT * pdev->id;
+- ltq_gpio_port[pdev->id].chip.ngpio = PINS_PER_PORT;
++ if (pdev->id == 3)
++ ltq_gpio_port[pdev->id].chip.ngpio = PINS_PORT3;
++ else
++ ltq_gpio_port[pdev->id].chip.ngpio = PINS_PER_PORT;
+ platform_set_drvdata(pdev, <q_gpio_port[pdev->id]);
+ return gpiochip_add(<q_gpio_port[pdev->id].chip);
+ }
+diff --git a/arch/mips/lantiq/xway/gpio_ebu.c b/arch/mips/lantiq/xway/gpio_ebu.c
+index b91c7f1..bc5696b 100644
+--- a/arch/mips/lantiq/xway/gpio_ebu.c
++++ b/arch/mips/lantiq/xway/gpio_ebu.c
+@@ -61,9 +61,8 @@ static struct gpio_chip ltq_ebu_chip = {
+ .label = "ltq_ebu",
+ .direction_output = ltq_ebu_direction_output,
+ .set = ltq_ebu_set,
+- .base = 72,
++ .base = 100,
+ .ngpio = 16,
+- .can_sleep = 1,
+ .owner = THIS_MODULE,
+ };
+
+diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
+index da91c5e..9610c10 100644
+--- a/arch/mips/lantiq/xway/gpio_stp.c
++++ b/arch/mips/lantiq/xway/gpio_stp.c
+@@ -74,9 +74,8 @@ static struct gpio_chip ltq_stp_chip = {
+ .label = "ltq_stp",
+ .direction_output = ltq_stp_direction_output,
+ .set = ltq_stp_set,
+- .base = 48,
++ .base = 200,
+ .ngpio = 24,
+- .can_sleep = 1,
+ .owner = THIS_MODULE,
+ };
+
+--
+1.7.9.1
+
+++ /dev/null
-From a53d622001ae396d89c9abacb62f3c3c7fbd3c13 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 8 Mar 2012 15:57:33 +0100
-Subject: [PATCH 55/70] MIPS: lantiq: pcie: add pcie driver
-
----
- arch/mips/Kconfig | 1 +
- arch/mips/lantiq/Kconfig | 4 -
- arch/mips/lantiq/xway/Kconfig | 21 +
- arch/mips/pci/Makefile | 2 +
- arch/mips/pci/fixup-lantiq-pcie.c | 81 +++
- arch/mips/pci/pci.c | 25 +
- arch/mips/pci/pcie-lantiq-msi.c | 399 +++++++++++
- arch/mips/pci/pcie-lantiq-phy.c | 408 ++++++++++++
- arch/mips/pci/pcie-lantiq.c | 1146 ++++++++++++++++++++++++++++++++
- arch/mips/pci/pcie-lantiq.h | 1305 +++++++++++++++++++++++++++++++++++++
- 10 files changed, 3388 insertions(+), 4 deletions(-)
- create mode 100644 arch/mips/pci/fixup-lantiq-pcie.c
- create mode 100644 arch/mips/pci/pcie-lantiq-msi.c
- create mode 100644 arch/mips/pci/pcie-lantiq-phy.c
- create mode 100644 arch/mips/pci/pcie-lantiq.c
- create mode 100644 arch/mips/pci/pcie-lantiq.h
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -2353,6 +2353,7 @@ config PCI_DOMAINS
- bool
-
- source "drivers/pci/Kconfig"
-+source "drivers/pci/pcie/Kconfig"
-
- #
- # ISA support is now enabled via select. Too many systems still have the one
---- a/arch/mips/lantiq/Kconfig
-+++ b/arch/mips/lantiq/Kconfig
-@@ -22,10 +22,6 @@ config SOC_FALCON
-
- endchoice
-
--config PCI_LANTIQ
-- bool "PCI Support"
-- depends on SOC_XWAY && PCI
--
- source "arch/mips/lantiq/xway/Kconfig"
- source "arch/mips/lantiq/falcon/Kconfig"
-
---- a/arch/mips/lantiq/xway/Kconfig
-+++ b/arch/mips/lantiq/xway/Kconfig
-@@ -8,6 +8,27 @@ config LANTIQ_MACH_EASY50712
-
- endmenu
-
-+choice
-+ prompt "PCI"
-+ default PCI_LANTIQ_NONE
-+
-+config PCI_LANTIQ_NONE
-+ bool "None"
-+
-+config PCI_LANTIQ
-+ bool "PCI Support"
-+ depends on PCI
-+
-+config PCIE_LANTIQ
-+ bool "PCIE Support"
-+ select ARCH_SUPPORTS_MSI
-+
-+endchoice
-+
-+config PCIE_LANTIQ_MSI
-+ bool
-+ depends on PCIE_LANTIQ && PCI_MSI
-+ default y
- endif
-
- if SOC_AMAZON_SE
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -42,6 +42,8 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1
- obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
- obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
- obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
-+obj-$(CONFIG_PCIE_LANTIQ) += pcie-lantiq-phy.o pcie-lantiq.o fixup-lantiq-pcie.o
-+obj-$(CONFIG_PCIE_LANTIQ_MSI) += pcie-lantiq-msi.o
- obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
- obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
- obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o
---- /dev/null
-+++ b/arch/mips/pci/fixup-lantiq-pcie.c
-@@ -0,0 +1,81 @@
-+/******************************************************************************
-+**
-+** FILE NAME : ifxmips_fixup_pcie.c
-+** PROJECT : IFX UEIP for VRX200
-+** MODULES : PCIe
-+**
-+** DATE : 02 Mar 2009
-+** AUTHOR : Lei Chuanhua
-+** DESCRIPTION : PCIe Root Complex Driver
-+** COPYRIGHT : Copyright (c) 2009
-+** Infineon Technologies AG
-+** Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+** This program is free software; you can redistribute it and/or modify
-+** it under the terms of the GNU General Public License as published by
-+** the Free Software Foundation; either version 2 of the License, or
-+** (at your option) any later version.
-+** HISTORY
-+** $Version $Date $Author $Comment
-+** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version
-+*******************************************************************************/
-+/*!
-+ \file ifxmips_fixup_pcie.c
-+ \ingroup IFX_PCIE
-+ \brief PCIe Fixup functions source file
-+*/
-+#include <linux/pci.h>
-+#include <linux/pci_regs.h>
-+#include <linux/pci_ids.h>
-+
-+#include <lantiq_soc.h>
-+
-+#include "pcie-lantiq.h"
-+
-+#define PCI_VENDOR_ID_INFINEON 0x15D1
-+#define PCI_DEVICE_ID_INFINEON_DANUBE 0x000F
-+#define PCI_DEVICE_ID_INFINEON_PCIE 0x0011
-+#define PCI_VENDOR_ID_LANTIQ 0x1BEF
-+#define PCI_DEVICE_ID_LANTIQ_PCIE 0x0011
-+
-+
-+
-+static void __devinit
-+ifx_pcie_fixup_resource(struct pci_dev *dev)
-+{
-+ u32 reg;
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev));
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s: fixup host controller %s (%04x:%04x)\n",
-+ __func__, pci_name(dev), dev->vendor, dev->device);
-+
-+ /* Setup COMMAND register */
-+ reg = PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER /* |
-+ PCI_COMMAND_INTX_DISABLE */| PCI_COMMAND_SERR;
-+ pci_write_config_word(dev, PCI_COMMAND, reg);
-+ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev));
-+}
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE, ifx_pcie_fixup_resource);
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_VENDOR_ID_LANTIQ, ifx_pcie_fixup_resource);
-+
-+static void __devinit
-+ifx_pcie_rc_class_early_fixup(struct pci_dev *dev)
-+{
-+ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev));
-+
-+ if (dev->devfn == PCI_DEVFN(0, 0) &&
-+ (dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) {
-+
-+ dev->class = (PCI_CLASS_BRIDGE_PCI << 8) | (dev->class & 0xff);
-+
-+ printk(KERN_INFO "%s: fixed pcie host bridge to pci-pci bridge\n", __func__);
-+ }
-+ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev));
-+}
-+
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE,
-+ ifx_pcie_rc_class_early_fixup);
-+
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_DEVICE_ID_LANTIQ_PCIE,
-+ ifx_pcie_rc_class_early_fixup);
---- a/arch/mips/pci/pci.c
-+++ b/arch/mips/pci/pci.c
-@@ -167,6 +167,31 @@ static int __init pcibios_init(void)
-
- subsys_initcall(pcibios_init);
-
-+int pcibios_host_nr(void)
-+{
-+ int count;
-+ struct pci_controller *hose;
-+ for (count = 0, hose = hose_head; hose; hose = hose->next, count++) {
-+ ;
-+ }
-+ return count;
-+}
-+EXPORT_SYMBOL(pcibios_host_nr);
-+
-+int pcibios_1st_host_bus_nr(void)
-+{
-+ int bus_nr = 0;
-+ struct pci_controller *hose = hose_head;
-+
-+ if (hose != NULL) {
-+ if (hose->bus != NULL) {
-+ bus_nr = hose->bus->subordinate + 1;
-+ }
-+ }
-+ return bus_nr;
-+}
-+EXPORT_SYMBOL(pcibios_1st_host_bus_nr);
-+
- static int pcibios_enable_resources(struct pci_dev *dev, int mask)
- {
- u16 cmd, old_cmd;
---- /dev/null
-+++ b/arch/mips/pci/pcie-lantiq-msi.c
-@@ -0,0 +1,399 @@
-+/******************************************************************************
-+**
-+** FILE NAME : ifxmips_pcie_msi.c
-+** PROJECT : IFX UEIP for VRX200
-+** MODULES : PCI MSI sub module
-+**
-+** DATE : 02 Mar 2009
-+** AUTHOR : Lei Chuanhua
-+** DESCRIPTION : PCIe MSI Driver
-+** COPYRIGHT : Copyright (c) 2009
-+** Infineon Technologies AG
-+** Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+** This program is free software; you can redistribute it and/or modify
-+** it under the terms of the GNU General Public License as published by
-+** the Free Software Foundation; either version 2 of the License, or
-+** (at your option) any later version.
-+** HISTORY
-+** $Date $Author $Comment
-+** 02 Mar,2009 Lei Chuanhua Initial version
-+*******************************************************************************/
-+/*!
-+ \defgroup IFX_PCIE_MSI MSI OS APIs
-+ \ingroup IFX_PCIE
-+ \brief PCIe bus driver OS interface functions
-+*/
-+
-+/*!
-+ \file ifxmips_pcie_msi.c
-+ \ingroup IFX_PCIE
-+ \brief PCIe MSI OS interface file
-+*/
-+
-+#include <linux/init.h>
-+#include <linux/sched.h>
-+#include <linux/slab.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/pci.h>
-+#include <linux/msi.h>
-+#include <linux/module.h>
-+#include <asm/bootinfo.h>
-+#include <asm/irq.h>
-+#include <asm/traps.h>
-+
-+#include "pcie-lantiq.h"
-+
-+#define IFX_MSI_IRQ_NUM 16
-+#define SM(_v, _f) (((_v) << _f##_S) & (_f))
-+
-+#define IFX_MSI_PIC_REG_BASE (KSEG1 | 0x1F700000)
-+#define IFX_PCIE_MSI_IR0 (INT_NUM_IM4_IRL0 + 27)
-+#define IFX_PCIE_MSI_IR1 (INT_NUM_IM4_IRL0 + 28)
-+#define IFX_PCIE_MSI_IR2 (INT_NUM_IM4_IRL0 + 29)
-+#define IFX_PCIE_MSI_IR3 (INT_NUM_IM0_IRL0 + 30)
-+
-+#define IFX_MSI_PCI_INT_DISABLE 0x80000000
-+#define IFX_MSI_PIC_INT_LINE 0x30000000
-+#define IFX_MSI_PIC_MSG_ADDR 0x0FFF0000
-+#define IFX_MSI_PIC_MSG_DATA 0x0000FFFF
-+#define IFX_MSI_PIC_BIG_ENDIAN 1
-+#define IFX_MSI_PIC_INT_LINE_S 28
-+#define IFX_MSI_PIC_MSG_ADDR_S 16
-+#define IFX_MSI_PIC_MSG_DATA_S 0x0
-+
-+enum {
-+ IFX_PCIE_MSI_IDX0 = 0,
-+ IFX_PCIE_MSI_IDX1,
-+ IFX_PCIE_MSI_IDX2,
-+ IFX_PCIE_MSI_IDX3,
-+};
-+
-+typedef struct ifx_msi_irq_idx {
-+ const int irq;
-+ const int idx;
-+}ifx_msi_irq_idx_t;
-+
-+struct ifx_msi_pic {
-+ volatile u32 pic_table[IFX_MSI_IRQ_NUM];
-+ volatile u32 pic_endian; /* 0x40 */
-+};
-+typedef struct ifx_msi_pic *ifx_msi_pic_t;
-+
-+typedef struct ifx_msi_irq {
-+ const volatile ifx_msi_pic_t msi_pic_p;
-+ const u32 msi_phy_base;
-+ const ifx_msi_irq_idx_t msi_irq_idx[IFX_MSI_IRQ_NUM];
-+ /*
-+ * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is
-+ * in use.
-+ */
-+ u16 msi_free_irq_bitmask;
-+
-+ /*
-+ * Each bit in msi_multiple_irq_bitmask tells that the device using
-+ * this bit in msi_free_irq_bitmask is also using the next bit. This
-+ * is used so we can disable all of the MSI interrupts when a device
-+ * uses multiple.
-+ */
-+ u16 msi_multiple_irq_bitmask;
-+}ifx_msi_irq_t;
-+
-+static ifx_msi_irq_t msi_irqs[IFX_PCIE_CORE_NR] = {
-+ {
-+ .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI_PIC_REG_BASE,
-+ .msi_phy_base = PCIE_MSI_PHY_BASE,
-+ .msi_irq_idx = {
-+ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+ },
-+ .msi_free_irq_bitmask = 0,
-+ .msi_multiple_irq_bitmask= 0,
-+ },
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+ {
-+ .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI1_PIC_REG_BASE,
-+ .msi_phy_base = PCIE1_MSI_PHY_BASE,
-+ .msi_irq_idx = {
-+ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1},
-+ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3},
-+ },
-+ .msi_free_irq_bitmask = 0,
-+ .msi_multiple_irq_bitmask= 0,
-+
-+ },
-+#endif /* CONFIG_IFX_PCIE_2ND_CORE */
-+};
-+
-+/*
-+ * This lock controls updates to msi_free_irq_bitmask,
-+ * msi_multiple_irq_bitmask and pic register settting
-+ */
-+static DEFINE_SPINLOCK(ifx_pcie_msi_lock);
-+
-+void pcie_msi_pic_init(int pcie_port)
-+{
-+ spin_lock(&ifx_pcie_msi_lock);
-+ msi_irqs[pcie_port].msi_pic_p->pic_endian = IFX_MSI_PIC_BIG_ENDIAN;
-+ spin_unlock(&ifx_pcie_msi_lock);
-+}
-+
-+/**
-+ * \fn int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
-+ * \brief Called when a driver request MSI interrupts instead of the
-+ * legacy INT A-D. This routine will allocate multiple interrupts
-+ * for MSI devices that support them. A device can override this by
-+ * programming the MSI control bits [6:4] before calling
-+ * pci_enable_msi().
-+ *
-+ * \param[in] pdev Device requesting MSI interrupts
-+ * \param[in] desc MSI descriptor
-+ *
-+ * \return -EINVAL Invalid pcie root port or invalid msi bit
-+ * \return 0 OK
-+ * \ingroup IFX_PCIE_MSI
-+ */
-+int
-+arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
-+{
-+ int irq, pos;
-+ u16 control;
-+ int irq_idx;
-+ int irq_step;
-+ int configured_private_bits;
-+ int request_private_bits;
-+ struct msi_msg msg;
-+ u16 search_mask;
-+ struct ifx_pci_controller *ctrl = pdev->bus->sysdata;
-+ int pcie_port = ctrl->port;
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s %s enter\n", __func__, pci_name(pdev));
-+
-+ /* XXX, skip RC MSI itself */
-+ if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) {
-+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s RC itself doesn't use MSI interrupt\n", __func__);
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * Read the MSI config to figure out how many IRQs this device
-+ * wants. Most devices only want 1, which will give
-+ * configured_private_bits and request_private_bits equal 0.
-+ */
-+ pci_read_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, &control);
-+
-+ /*
-+ * If the number of private bits has been configured then use
-+ * that value instead of the requested number. This gives the
-+ * driver the chance to override the number of interrupts
-+ * before calling pci_enable_msi().
-+ */
-+ configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4;
-+ if (configured_private_bits == 0) {
-+ /* Nothing is configured, so use the hardware requested size */
-+ request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1;
-+ }
-+ else {
-+ /*
-+ * Use the number of configured bits, assuming the
-+ * driver wanted to override the hardware request
-+ * value.
-+ */
-+ request_private_bits = configured_private_bits;
-+ }
-+
-+ /*
-+ * The PCI 2.3 spec mandates that there are at most 32
-+ * interrupts. If this device asks for more, only give it one.
-+ */
-+ if (request_private_bits > 5) {
-+ request_private_bits = 0;
-+ }
-+again:
-+ /*
-+ * The IRQs have to be aligned on a power of two based on the
-+ * number being requested.
-+ */
-+ irq_step = (1 << request_private_bits);
-+
-+ /* Mask with one bit for each IRQ */
-+ search_mask = (1 << irq_step) - 1;
-+
-+ /*
-+ * We're going to search msi_free_irq_bitmask_lock for zero
-+ * bits. This represents an MSI interrupt number that isn't in
-+ * use.
-+ */
-+ spin_lock(&ifx_pcie_msi_lock);
-+ for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos += irq_step) {
-+ if ((msi_irqs[pcie_port].msi_free_irq_bitmask & (search_mask << pos)) == 0) {
-+ msi_irqs[pcie_port].msi_free_irq_bitmask |= search_mask << pos;
-+ msi_irqs[pcie_port].msi_multiple_irq_bitmask |= (search_mask >> 1) << pos;
-+ break;
-+ }
-+ }
-+ spin_unlock(&ifx_pcie_msi_lock);
-+
-+ /* Make sure the search for available interrupts didn't fail */
-+ if (pos >= IFX_MSI_IRQ_NUM) {
-+ if (request_private_bits) {
-+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s: Unable to find %d free "
-+ "interrupts, trying just one", __func__, 1 << request_private_bits);
-+ request_private_bits = 0;
-+ goto again;
-+ }
-+ else {
-+ printk(KERN_ERR "%s: Unable to find a free MSI interrupt\n", __func__);
-+ return -EINVAL;
-+ }
-+ }
-+ irq = msi_irqs[pcie_port].msi_irq_idx[pos].irq;
-+ irq_idx = msi_irqs[pcie_port].msi_irq_idx[pos].idx;
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "pos %d, irq %d irq_idx %d\n", pos, irq, irq_idx);
-+
-+ /*
-+ * Initialize MSI. This has to match the memory-write endianess from the device
-+ * Address bits [23:12]
-+ */
-+ spin_lock(&ifx_pcie_msi_lock);
-+ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] = SM(irq_idx, IFX_MSI_PIC_INT_LINE) |
-+ SM((msi_irqs[pcie_port].msi_phy_base >> 12), IFX_MSI_PIC_MSG_ADDR) |
-+ SM((1 << pos), IFX_MSI_PIC_MSG_DATA);
-+
-+ /* Enable this entry */
-+ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~IFX_MSI_PCI_INT_DISABLE;
-+ spin_unlock(&ifx_pcie_msi_lock);
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "pic_table[%d]: 0x%08x\n",
-+ pos, msi_irqs[pcie_port].msi_pic_p->pic_table[pos]);
-+
-+ /* Update the number of IRQs the device has available to it */
-+ control &= ~PCI_MSI_FLAGS_QSIZE;
-+ control |= (request_private_bits << 4);
-+ pci_write_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, control);
-+
-+ irq_set_msi_desc(irq, desc);
-+ msg.address_hi = 0x0;
-+ msg.address_lo = msi_irqs[pcie_port].msi_phy_base;
-+ msg.data = SM((1 << pos), IFX_MSI_PIC_MSG_DATA);
-+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "msi_data: pos %d 0x%08x\n", pos, msg.data);
-+
-+ write_msi_msg(irq, &msg);
-+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__);
-+ return 0;
-+}
-+
-+static int
-+pcie_msi_irq_to_port(unsigned int irq, int *port)
-+{
-+ int ret = 0;
-+
-+ if (irq == IFX_PCIE_MSI_IR0 || irq == IFX_PCIE_MSI_IR1 ||
-+ irq == IFX_PCIE_MSI_IR2 || irq == IFX_PCIE_MSI_IR3) {
-+ *port = IFX_PCIE_PORT0;
-+ }
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+ else if (irq == IFX_PCIE1_MSI_IR0 || irq == IFX_PCIE1_MSI_IR1 ||
-+ irq == IFX_PCIE1_MSI_IR2 || irq == IFX_PCIE1_MSI_IR3) {
-+ *port = IFX_PCIE_PORT1;
-+ }
-+#endif /* CONFIG_IFX_PCIE_2ND_CORE */
-+ else {
-+ printk(KERN_ERR "%s: Attempted to teardown illegal "
-+ "MSI interrupt (%d)\n", __func__, irq);
-+ ret = -EINVAL;
-+ }
-+ return ret;
-+}
-+
-+/**
-+ * \fn void arch_teardown_msi_irq(unsigned int irq)
-+ * \brief Called when a device no longer needs its MSI interrupts. All
-+ * MSI interrupts for the device are freed.
-+ *
-+ * \param irq The devices first irq number. There may be multple in sequence.
-+ * \return none
-+ * \ingroup IFX_PCIE_MSI
-+ */
-+void
-+arch_teardown_msi_irq(unsigned int irq)
-+{
-+ int pos;
-+ int number_irqs;
-+ u16 bitmask;
-+ int pcie_port;
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s enter\n", __func__);
-+
-+ BUG_ON(irq > (INT_NUM_IM4_IRL0 + 31));
-+
-+ if (pcie_msi_irq_to_port(irq, &pcie_port) != 0) {
-+ return;
-+ }
-+
-+ /* Shift the mask to the correct bit location, not always correct
-+ * Probally, the first match will be chosen.
-+ */
-+ for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos++) {
-+ if ((msi_irqs[pcie_port].msi_irq_idx[pos].irq == irq)
-+ && (msi_irqs[pcie_port].msi_free_irq_bitmask & ( 1 << pos))) {
-+ break;
-+ }
-+ }
-+ if (pos >= IFX_MSI_IRQ_NUM) {
-+ printk(KERN_ERR "%s: Unable to find a matched MSI interrupt\n", __func__);
-+ return;
-+ }
-+ spin_lock(&ifx_pcie_msi_lock);
-+ /* Disable this entry */
-+ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] |= IFX_MSI_PCI_INT_DISABLE;
-+ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~(IFX_MSI_PIC_INT_LINE | IFX_MSI_PIC_MSG_ADDR | IFX_MSI_PIC_MSG_DATA);
-+ spin_unlock(&ifx_pcie_msi_lock);
-+ /*
-+ * Count the number of IRQs we need to free by looking at the
-+ * msi_multiple_irq_bitmask. Each bit set means that the next
-+ * IRQ is also owned by this device.
-+ */
-+ number_irqs = 0;
-+ while (((pos + number_irqs) < IFX_MSI_IRQ_NUM) &&
-+ (msi_irqs[pcie_port].msi_multiple_irq_bitmask & (1 << (pos + number_irqs)))) {
-+ number_irqs++;
-+ }
-+ number_irqs++;
-+
-+ /* Mask with one bit for each IRQ */
-+ bitmask = (1 << number_irqs) - 1;
-+
-+ bitmask <<= pos;
-+ if ((msi_irqs[pcie_port].msi_free_irq_bitmask & bitmask) != bitmask) {
-+ printk(KERN_ERR "%s: Attempted to teardown MSI "
-+ "interrupt (%d) not in use\n", __func__, irq);
-+ return;
-+ }
-+ /* Checks are done, update the in use bitmask */
-+ spin_lock(&ifx_pcie_msi_lock);
-+ msi_irqs[pcie_port].msi_free_irq_bitmask &= ~bitmask;
-+ msi_irqs[pcie_port].msi_multiple_irq_bitmask &= ~(bitmask >> 1);
-+ spin_unlock(&ifx_pcie_msi_lock);
-+ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__);
-+}
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Chuanhua.Lei@infineon.com");
-+MODULE_SUPPORTED_DEVICE("Infineon PCIe IP builtin MSI PIC module");
-+MODULE_DESCRIPTION("Infineon PCIe IP builtin MSI PIC driver");
-+
---- /dev/null
-+++ b/arch/mips/pci/pcie-lantiq-phy.c
-@@ -0,0 +1,408 @@
-+/******************************************************************************
-+**
-+** FILE NAME : ifxmips_pcie_phy.c
-+** PROJECT : IFX UEIP for VRX200
-+** MODULES : PCIe PHY sub module
-+**
-+** DATE : 14 May 2009
-+** AUTHOR : Lei Chuanhua
-+** DESCRIPTION : PCIe Root Complex Driver
-+** COPYRIGHT : Copyright (c) 2009
-+** Infineon Technologies AG
-+** Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+** This program is free software; you can redistribute it and/or modify
-+** it under the terms of the GNU General Public License as published by
-+** the Free Software Foundation; either version 2 of the License, or
-+** (at your option) any later version.
-+** HISTORY
-+** $Version $Date $Author $Comment
-+** 0.0.1 14 May,2009 Lei Chuanhua Initial version
-+*******************************************************************************/
-+/*!
-+ \file ifxmips_pcie_phy.c
-+ \ingroup IFX_PCIE
-+ \brief PCIe PHY PLL register programming source file
-+*/
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <asm/paccess.h>
-+#include <linux/delay.h>
-+
-+#include "pcie-lantiq.h"
-+
-+/* PCIe PDI only supports 16 bit operation */
-+
-+#define IFX_PCIE_PHY_REG_WRITE16(__addr, __data) \
-+ ((*(volatile u16 *) (__addr)) = (__data))
-+
-+#define IFX_PCIE_PHY_REG_READ16(__addr) \
-+ (*(volatile u16 *) (__addr))
-+
-+#define IFX_PCIE_PHY_REG16(__addr) \
-+ (*(volatile u16 *) (__addr))
-+
-+#define IFX_PCIE_PHY_REG(__reg, __value, __mask) do { \
-+ u16 read_data; \
-+ u16 write_data; \
-+ read_data = IFX_PCIE_PHY_REG_READ16((__reg)); \
-+ write_data = (read_data & ((u16)~(__mask))) | (((u16)(__value)) & ((u16)(__mask)));\
-+ IFX_PCIE_PHY_REG_WRITE16((__reg), write_data); \
-+} while (0)
-+
-+#define IFX_PCIE_PLL_TIMEOUT 1000 /* Tunnable */
-+
-+static void
-+pcie_phy_comm_setup(int pcie_port)
-+{
-+ /* PLL Setting */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF);
-+
-+ /* increase the bias reference voltage */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF);
-+
-+ /* Endcnt */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF);
-+
-+ /* force */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008);
-+
-+ /* predrv_ser_en */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF);
-+
-+ /* ctrl_lim */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF);
-+
-+ /* ctrl */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00);
-+
-+ /* predrv_ser_en */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00);
-+
-+ /* RTERM*/
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF);
-+
-+ /* Improved 100MHz clock output */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF);
-+
-+ /* Reduced CDR BW to avoid glitches */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF);
-+}
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE
-+static void
-+pcie_phy_36mhz_mode_setup(int pcie_port)
-+{
-+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
-+
-+ /* en_ext_mmd_div_ratio */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
-+
-+ /* ext_mmd_div_ratio*/
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
-+
-+ /* pll_ensdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
-+
-+ /* en_const_sdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
-+
-+ /* mmd */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
-+
-+ /* lf_mode */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
-+
-+ /* const_sdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
-+
-+ /* const sdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
-+
-+ /* pllmod */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF);
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
-+}
-+#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE
-+static void
-+pcie_phy_36mhz_ssc_mode_setup(int pcie_port)
-+{
-+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
-+
-+ /* PLL Setting */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF);
-+
-+ /* Increase the bias reference voltage */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF);
-+
-+ /* Endcnt */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF);
-+
-+ /* Force */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008);
-+
-+ /* Predrv_ser_en */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF);
-+
-+ /* ctrl_lim */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF);
-+
-+ /* ctrl */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00);
-+
-+ /* predrv_ser_en */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00);
-+
-+ /* RTERM*/
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF);
-+
-+ /* en_ext_mmd_div_ratio */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
-+
-+ /* ext_mmd_div_ratio*/
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
-+
-+ /* pll_ensdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0400, 0x0400);
-+
-+ /* en_const_sdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
-+
-+ /* mmd */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
-+
-+ /* lf_mode */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
-+
-+ /* const_sdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
-+
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0100);
-+ /* const sdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
-+
-+ /* pllmod */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1c72, 0xFFFF);
-+
-+ /* improved 100MHz clock output */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF);
-+
-+ /* reduced CDR BW to avoid glitches */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF);
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
-+}
-+#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE */
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_25MHZ_MODE
-+static void
-+pcie_phy_25mhz_mode_setup(int pcie_port)
-+{
-+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
-+ /* en_const_sdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
-+
-+ /* pll_ensdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0200);
-+
-+ /* en_ext_mmd_div_ratio*/
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0002, 0x0002);
-+
-+ /* ext_mmd_div_ratio*/
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0040, 0x0070);
-+
-+ /* mmd */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x6000, 0xe000);
-+
-+ /* lf_mode */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x4000, 0x4000);
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
-+}
-+#endif /* CONFIG_IFX_PCIE_PHY_25MHZ_MODE */
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_100MHZ_MODE
-+static void
-+pcie_phy_100mhz_mode_setup(int pcie_port)
-+{
-+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port);
-+ /* en_ext_mmd_div_ratio */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002);
-+
-+ /* ext_mmd_div_ratio*/
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070);
-+
-+ /* pll_ensdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200);
-+
-+ /* en_const_sdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100);
-+
-+ /* mmd */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000);
-+
-+ /* lf_mode */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000);
-+
-+ /* const_sdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF);
-+
-+ /* const sdm */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF);
-+
-+ /* pllmod */
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF);
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port);
-+}
-+#endif /* CONFIG_IFX_PCIE_PHY_100MHZ_MODE */
-+
-+static int
-+pcie_phy_wait_startup_ready(int pcie_port)
-+{
-+ int i;
-+
-+ for (i = 0; i < IFX_PCIE_PLL_TIMEOUT; i++) {
-+ if ((IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port)) & 0x0040) != 0) {
-+ break;
-+ }
-+ udelay(10);
-+ }
-+ if (i >= IFX_PCIE_PLL_TIMEOUT) {
-+ printk(KERN_ERR "%s PLL Link timeout\n", __func__);
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+static void
-+pcie_phy_load_enable(int pcie_port, int slice)
-+{
-+ /* Set the load_en of tx/rx slice to '1' */
-+ switch (slice) {
-+ case 1:
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0010, 0x0010);
-+ break;
-+ case 2:
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0010, 0x0010);
-+ break;
-+ case 3:
-+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0002, 0x0002);
-+ break;
-+ }
-+}
-+
-+static void
-+pcie_phy_load_disable(int pcie_port, int slice)
-+{
-+ /* set the load_en of tx/rx slice to '0' */
-+ switch (slice) {
-+ case 1:
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0000, 0x0010);
-+ break;
-+ case 2:
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0000, 0x0010);
-+ break;
-+ case 3:
-+ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0000, 0x0002);
-+ break;
-+ }
-+}
-+
-+static void pcie_phy_load_war(int pcie_port)
-+{
-+ int slice;
-+
-+ for (slice = 1; slice < 4; slice++) {
-+ pcie_phy_load_enable(pcie_port, slice);
-+ udelay(1);
-+ pcie_phy_load_disable(pcie_port, slice);
-+ }
-+}
-+
-+static void pcie_phy_tx2_modulation(int pcie_port)
-+{
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD1(pcie_port), 0x1FFE, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD2(pcie_port), 0xFFFE, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0601, 0xFFFF);
-+ mdelay(1);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0001, 0xFFFF);
-+}
-+
-+static void pcie_phy_tx1_modulation(int pcie_port)
-+{
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD1(pcie_port), 0x1FFE, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD2(pcie_port), 0xFFFE, 0xFFFF);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0601, 0xFFFF);
-+ mdelay(1);
-+ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0001, 0xFFFF);
-+}
-+
-+static void pcie_phy_tx_modulation_war(int pcie_port)
-+{
-+ int i;
-+#define PCIE_PHY_MODULATION_NUM 5
-+ for (i = 0; i < PCIE_PHY_MODULATION_NUM; i++) {
-+ pcie_phy_tx2_modulation(pcie_port);
-+ pcie_phy_tx1_modulation(pcie_port);
-+ }
-+#undef PCIE_PHY_MODULATION_NUM
-+}
-+
-+void pcie_phy_clock_mode_setup(int pcie_port)
-+{
-+ pcie_pdi_big_endian(pcie_port);
-+
-+ /* Enable PDI to access PCIe PHY register */
-+ pcie_pdi_pmu_enable(pcie_port);
-+
-+ /* Configure PLL and PHY clock */
-+ pcie_phy_comm_setup(pcie_port);
-+
-+#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE
-+ pcie_phy_36mhz_mode_setup(pcie_port);
-+#elif defined(CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE)
-+ pcie_phy_36mhz_ssc_mode_setup(pcie_port);
-+#elif defined(CONFIG_IFX_PCIE_PHY_25MHZ_MODE)
-+ pcie_phy_25mhz_mode_setup(pcie_port);
-+#elif defined (CONFIG_IFX_PCIE_PHY_100MHZ_MODE)
-+ pcie_phy_100mhz_mode_setup(pcie_port);
-+#else
-+ #error "PCIE PHY Clock Mode must be chosen first!!!!"
-+#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */
-+
-+ /* Enable PCIe PHY and make PLL setting take effect */
-+ pcie_phy_pmu_enable(pcie_port);
-+
-+ /* Check if we are in startup_ready status */
-+ pcie_phy_wait_startup_ready(pcie_port);
-+
-+ pcie_phy_load_war(pcie_port);
-+
-+ /* Apply TX modulation workarounds */
-+ pcie_phy_tx_modulation_war(pcie_port);
-+
-+#ifdef IFX_PCI_PHY_REG_DUMP
-+ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Modified PHY register dump\n");
-+ pcie_phy_reg_dump(pcie_port);
-+#endif
-+}
-+
---- /dev/null
-+++ b/arch/mips/pci/pcie-lantiq.c
-@@ -0,0 +1,1146 @@
-+#include <linux/types.h>
-+#include <linux/module.h>
-+#include <linux/pci.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+#include <linux/mm.h>
-+#include <asm/paccess.h>
-+#include <linux/pci.h>
-+#include <linux/pci_regs.h>
-+#include <linux/platform_device.h>
-+
-+#define CONFIG_IFX_PCIE_1ST_CORE
-+
-+#include "pcie-lantiq.h"
-+
-+#define IFX_PCIE_IR (INT_NUM_IM4_IRL0 + 25)
-+#define IFX_PCIE_INTA (INT_NUM_IM4_IRL0 + 8)
-+#define IFX_PCIE_INTB (INT_NUM_IM4_IRL0 + 9)
-+#define IFX_PCIE_INTC (INT_NUM_IM4_IRL0 + 10)
-+#define IFX_PCIE_INTD (INT_NUM_IM4_IRL0 + 11)
-+#define MS(_v, _f) (((_v) & (_f)) >> _f##_S)
-+#define SM(_v, _f) (((_v) << _f##_S) & (_f))
-+#define IFX_REG_SET_BIT(_f, _r) \
-+ IFX_REG_W32((IFX_REG_R32((_r)) &~ (_f)) | (_f), (_r))
-+#define IFX_PCIE_LTSSM_ENABLE_TIMEOUT 10
-+#define IFX_PCIE_PHY_LINK_UP_TIMEOUT 1000
-+#define IFX_PCIE_PHY_LOOP_CNT 5
-+
-+static DEFINE_SPINLOCK(ifx_pcie_lock);
-+
-+int pcibios_1st_host_bus_nr(void);
-+
-+unsigned int g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG);
-+
-+static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = {
-+ {
-+ .ir_irq = {
-+ .irq = IFX_PCIE_IR,
-+ .name = "ifx_pcie_rc0",
-+ },
-+
-+ .legacy_irq = {
-+ {
-+ .irq_bit = PCIE_IRN_INTA,
-+ .irq = IFX_PCIE_INTA,
-+ },
-+ {
-+ .irq_bit = PCIE_IRN_INTB,
-+ .irq = IFX_PCIE_INTB,
-+ },
-+ {
-+ .irq_bit = PCIE_IRN_INTC,
-+ .irq = IFX_PCIE_INTC,
-+ },
-+ {
-+ .irq_bit = PCIE_IRN_INTD,
-+ .irq = IFX_PCIE_INTD,
-+ },
-+ },
-+ },
-+};
-+
-+static inline int pcie_ltssm_enable(int pcie_port)
-+{
-+ int i;
-+
-+ IFX_REG_W32(PCIE_RC_CCR_LTSSM_ENABLE, PCIE_RC_CCR(pcie_port)); /* Enable LTSSM */
-+
-+ /* Wait for the link to come up */
-+ for (i = 0; i < IFX_PCIE_LTSSM_ENABLE_TIMEOUT; i++) {
-+ if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_RETRAIN_PENDING)) {
-+ break;
-+ }
-+ udelay(10);
-+ }
-+ if (i >= IFX_PCIE_LTSSM_ENABLE_TIMEOUT) {
-+ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s link timeout!!!!!\n", __func__);
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+static inline void pcie_status_register_clear(int pcie_port)
-+{
-+ IFX_REG_W32(0, PCIE_RC_DR(pcie_port));
-+ IFX_REG_W32(0, PCIE_PCICMDSTS(pcie_port));
-+ IFX_REG_W32(0, PCIE_DCTLSTS(pcie_port));
-+ IFX_REG_W32(0, PCIE_LCTLSTS(pcie_port));
-+ IFX_REG_W32(0, PCIE_SLCTLSTS(pcie_port));
-+ IFX_REG_W32(0, PCIE_RSTS(pcie_port));
-+ IFX_REG_W32(0, PCIE_UES_R(pcie_port));
-+ IFX_REG_W32(0, PCIE_UEMR(pcie_port));
-+ IFX_REG_W32(0, PCIE_UESR(pcie_port));
-+ IFX_REG_W32(0, PCIE_CESR(pcie_port));
-+ IFX_REG_W32(0, PCIE_CEMR(pcie_port));
-+ IFX_REG_W32(0, PCIE_RESR(pcie_port));
-+ IFX_REG_W32(0, PCIE_PVCCRSR(pcie_port));
-+ IFX_REG_W32(0, PCIE_VC0_RSR0(pcie_port));
-+ IFX_REG_W32(0, PCIE_TPFCS(pcie_port));
-+ IFX_REG_W32(0, PCIE_TNPFCS(pcie_port));
-+ IFX_REG_W32(0, PCIE_TCFCS(pcie_port));
-+ IFX_REG_W32(0, PCIE_QSR(pcie_port));
-+ IFX_REG_W32(0, PCIE_IOBLSECS(pcie_port));
-+}
-+
-+static inline int ifx_pcie_link_up(int pcie_port)
-+{
-+ return (IFX_REG_R32(PCIE_PHY_SR(pcie_port)) & PCIE_PHY_SR_PHY_LINK_UP) ? 1 : 0;
-+}
-+
-+static inline void pcie_mem_io_setup(int pcie_port)
-+{
-+ unsigned int reg;
-+ /*
-+ * BAR[0:1] readonly register
-+ * RC contains only minimal BARs for packets mapped to this device
-+ * Mem/IO filters defines a range of memory occupied by memory mapped IO devices that
-+ * reside on the downstream side fo the bridge.
-+ */
-+ reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_MBML_MEM_LIMIT_ADDR)
-+ | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_MBML_MEM_BASE_ADDR);
-+ IFX_REG_W32(reg, PCIE_MBML(pcie_port));
-+
-+ /* PCIe_PBML, same as MBML */
-+ IFX_REG_W32(IFX_REG_R32(PCIE_MBML(pcie_port)), PCIE_PMBL(pcie_port));
-+
-+ /* IO Address Range */
-+ reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 12), PCIE_IOBLSECS_IO_LIMIT_ADDR)
-+ | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 12), PCIE_IOBLSECS_IO_BASE_ADDR);
-+ reg |= PCIE_IOBLSECS_32BIT_IO_ADDR;
-+ IFX_REG_W32(reg, PCIE_IOBLSECS(pcie_port));
-+
-+ reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT)
-+ | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_BASE);
-+ IFX_REG_W32(reg, PCIE_IO_BANDL(pcie_port));
-+}
-+
-+static inline void pcie_msi_setup(int pcie_port)
-+{
-+ unsigned int reg;
-+
-+ /* XXX, MSI stuff should only apply to EP */
-+ /* MSI Capability: Only enable 32-bit addresses */
-+ reg = IFX_REG_R32(PCIE_MCAPR(pcie_port));
-+ reg &= ~PCIE_MCAPR_ADDR64_CAP;
-+ reg |= PCIE_MCAPR_MSI_ENABLE;
-+
-+ /* Disable multiple message */
-+ reg &= ~(PCIE_MCAPR_MULTI_MSG_CAP | PCIE_MCAPR_MULTI_MSG_ENABLE);
-+ IFX_REG_W32(reg, PCIE_MCAPR(pcie_port));
-+}
-+
-+static inline void pcie_pm_setup(int pcie_port)
-+{
-+ unsigned int reg;
-+
-+ /* Enable PME, Soft reset enabled */
-+ reg = IFX_REG_R32(PCIE_PM_CSR(pcie_port));
-+ reg |= PCIE_PM_CSR_PME_ENABLE | PCIE_PM_CSR_SW_RST;
-+ IFX_REG_W32(reg, PCIE_PM_CSR(pcie_port));
-+}
-+
-+static inline void pcie_bus_setup(int pcie_port)
-+{
-+ unsigned int reg;
-+
-+ reg = SM(0, PCIE_BNR_PRIMARY_BUS_NUM) | SM(1, PCIE_PNR_SECONDARY_BUS_NUM) | SM(0xFF, PCIE_PNR_SUB_BUS_NUM);
-+ IFX_REG_W32(reg, PCIE_BNR(pcie_port));
-+}
-+
-+static inline void pcie_device_setup(int pcie_port)
-+{
-+ unsigned int reg;
-+
-+ /* Device capability register, set up Maximum payload size */
-+ reg = IFX_REG_R32(PCIE_DCAP(pcie_port));
-+ reg |= PCIE_DCAP_ROLE_BASE_ERR_REPORT;
-+ reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCAP_MAX_PAYLOAD_SIZE);
-+
-+ /* Only available for EP */
-+ reg &= ~(PCIE_DCAP_EP_L0S_LATENCY | PCIE_DCAP_EP_L1_LATENCY);
-+ IFX_REG_W32(reg, PCIE_DCAP(pcie_port));
-+
-+ /* Device control and status register */
-+ /* Set Maximum Read Request size for the device as a Requestor */
-+ reg = IFX_REG_R32(PCIE_DCTLSTS(pcie_port));
-+
-+ /*
-+ * Request size can be larger than the MPS used, but the completions returned
-+ * for the read will be bounded by the MPS size.
-+ * In our system, Max request size depends on AHB burst size. It is 64 bytes.
-+ * but we set it as 128 as minimum one.
-+ */
-+ reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_READ_SIZE)
-+ | SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_PAYLOAD_SIZE);
-+
-+ /* Enable relaxed ordering, no snoop, and all kinds of errors */
-+ reg |= PCIE_DCTLSTS_RELAXED_ORDERING_EN | PCIE_DCTLSTS_ERR_EN | PCIE_DCTLSTS_NO_SNOOP_EN;
-+
-+ IFX_REG_W32(reg, PCIE_DCTLSTS(pcie_port));
-+}
-+
-+static inline void pcie_link_setup(int pcie_port)
-+{
-+ unsigned int reg;
-+
-+ /*
-+ * XXX, Link capability register, bit 18 for EP CLKREQ# dynamic clock management for L1, L2/3 CPM
-+ * L0s is reported during link training via TS1 order set by N_FTS
-+ */
-+ reg = IFX_REG_R32(PCIE_LCAP(pcie_port));
-+ reg &= ~PCIE_LCAP_L0S_EIXT_LATENCY;
-+ reg |= SM(3, PCIE_LCAP_L0S_EIXT_LATENCY);
-+ IFX_REG_W32(reg, PCIE_LCAP(pcie_port));
-+
-+ /* Link control and status register */
-+ reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port));
-+
-+ /* Link Enable, ASPM enabled */
-+ reg &= ~PCIE_LCTLSTS_LINK_DISABLE;
-+
-+#ifdef CONFIG_PCIEASPM
-+ /*
-+ * We use the same physical reference clock that the platform provides on the connector
-+ * It paved the way for ASPM to calculate the new exit Latency
-+ */
-+ reg |= PCIE_LCTLSTS_SLOT_CLK_CFG;
-+ reg |= PCIE_LCTLSTS_COM_CLK_CFG;
-+ /*
-+ * We should disable ASPM by default except that we have dedicated power management support
-+ * Enable ASPM will cause the system hangup/instability, performance degration
-+ */
-+ reg |= PCIE_LCTLSTS_ASPM_ENABLE;
-+#else
-+ reg &= ~PCIE_LCTLSTS_ASPM_ENABLE;
-+#endif /* CONFIG_PCIEASPM */
-+
-+ /*
-+ * The maximum size of any completion with data packet is bounded by the MPS setting
-+ * in device control register
-+ */
-+ /* RCB may cause multiple split transactions, two options available, we use 64 byte RCB */
-+ reg &= ~ PCIE_LCTLSTS_RCB128;
-+ IFX_REG_W32(reg, PCIE_LCTLSTS(pcie_port));
-+}
-+
-+static inline void pcie_error_setup(int pcie_port)
-+{
-+ unsigned int reg;
-+
-+ /*
-+ * Forward ERR_COR, ERR_NONFATAL, ERR_FATAL to the backbone
-+ * Poisoned write TLPs and completions indicating poisoned TLPs will set the PCIe_PCICMDSTS.MDPE
-+ */
-+ reg = IFX_REG_R32(PCIE_INTRBCTRL(pcie_port));
-+ reg |= PCIE_INTRBCTRL_SERR_ENABLE | PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE;
-+
-+ IFX_REG_W32(reg, PCIE_INTRBCTRL(pcie_port));
-+
-+ /* Uncorrectable Error Mask Register, Unmask <enable> all bits in PCIE_UESR */
-+ reg = IFX_REG_R32(PCIE_UEMR(pcie_port));
-+ reg &= ~PCIE_ALL_UNCORRECTABLE_ERR;
-+ IFX_REG_W32(reg, PCIE_UEMR(pcie_port));
-+
-+ /* Uncorrectable Error Severity Register, ALL errors are FATAL */
-+ IFX_REG_W32(PCIE_ALL_UNCORRECTABLE_ERR, PCIE_UESR(pcie_port));
-+
-+ /* Correctable Error Mask Register, unmask <enable> all bits */
-+ reg = IFX_REG_R32(PCIE_CEMR(pcie_port));
-+ reg &= ~PCIE_CORRECTABLE_ERR;
-+ IFX_REG_W32(reg, PCIE_CEMR(pcie_port));
-+
-+ /* Advanced Error Capabilities and Control Registr */
-+ reg = IFX_REG_R32(PCIE_AECCR(pcie_port));
-+ reg |= PCIE_AECCR_ECRC_CHECK_EN | PCIE_AECCR_ECRC_GEN_EN;
-+ IFX_REG_W32(reg, PCIE_AECCR(pcie_port));
-+
-+ /* Root Error Command Register, Report all types of errors */
-+ reg = IFX_REG_R32(PCIE_RECR(pcie_port));
-+ reg |= PCIE_RECR_ERR_REPORT_EN;
-+ IFX_REG_W32(reg, PCIE_RECR(pcie_port));
-+
-+ /* Clear the Root status register */
-+ reg = IFX_REG_R32(PCIE_RESR(pcie_port));
-+ IFX_REG_W32(reg, PCIE_RESR(pcie_port));
-+}
-+
-+static inline void pcie_root_setup(int pcie_port)
-+{
-+ unsigned int reg;
-+
-+ /* Root control and capabilities register */
-+ reg = IFX_REG_R32(PCIE_RCTLCAP(pcie_port));
-+ reg |= PCIE_RCTLCAP_SERR_ENABLE | PCIE_RCTLCAP_PME_INT_EN;
-+ IFX_REG_W32(reg, PCIE_RCTLCAP(pcie_port));
-+}
-+
-+static inline void pcie_vc_setup(int pcie_port)
-+{
-+ unsigned int reg;
-+
-+ /* Port VC Capability Register 2 */
-+ reg = IFX_REG_R32(PCIE_PVC2(pcie_port));
-+ reg &= ~PCIE_PVC2_VC_ARB_WRR;
-+ reg |= PCIE_PVC2_VC_ARB_16P_FIXED_WRR;
-+ IFX_REG_W32(reg, PCIE_PVC2(pcie_port));
-+
-+ /* VC0 Resource Capability Register */
-+ reg = IFX_REG_R32(PCIE_VC0_RC(pcie_port));
-+ reg &= ~PCIE_VC0_RC_REJECT_SNOOP;
-+ IFX_REG_W32(reg, PCIE_VC0_RC(pcie_port));
-+}
-+
-+static inline void pcie_port_logic_setup(int pcie_port)
-+{
-+ unsigned int reg;
-+
-+ /* FTS number, default 12, increase to 63, may increase time from/to L0s to L0 */
-+ reg = IFX_REG_R32(PCIE_AFR(pcie_port));
-+ reg &= ~(PCIE_AFR_FTS_NUM | PCIE_AFR_COM_FTS_NUM);
-+ reg |= SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_FTS_NUM)
-+ | SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_COM_FTS_NUM);
-+ /* L0s and L1 entry latency */
-+ reg &= ~(PCIE_AFR_L0S_ENTRY_LATENCY | PCIE_AFR_L1_ENTRY_LATENCY);
-+ reg |= SM(PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L0S_ENTRY_LATENCY)
-+ | SM(PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L1_ENTRY_LATENCY);
-+ IFX_REG_W32(reg, PCIE_AFR(pcie_port));
-+
-+ /* Port Link Control Register */
-+ reg = IFX_REG_R32(PCIE_PLCR(pcie_port));
-+ reg |= PCIE_PLCR_DLL_LINK_EN; /* Enable the DLL link */
-+ IFX_REG_W32(reg, PCIE_PLCR(pcie_port));
-+
-+ /* Lane Skew Register */
-+ reg = IFX_REG_R32(PCIE_LSR(pcie_port));
-+ /* Enable ACK/NACK and FC */
-+ reg &= ~(PCIE_LSR_ACKNAK_DISABLE | PCIE_LSR_FC_DISABLE);
-+ IFX_REG_W32(reg, PCIE_LSR(pcie_port));
-+
-+ /* Symbol Timer Register and Filter Mask Register 1 */
-+ reg = IFX_REG_R32(PCIE_STRFMR(pcie_port));
-+
-+ /* Default SKP interval is very accurate already, 5us */
-+ /* Enable IO/CFG transaction */
-+ reg |= PCIE_STRFMR_RX_CFG_TRANS_ENABLE | PCIE_STRFMR_RX_IO_TRANS_ENABLE;
-+ /* Disable FC WDT */
-+ reg &= ~PCIE_STRFMR_FC_WDT_DISABLE;
-+ IFX_REG_W32(reg, PCIE_STRFMR(pcie_port));
-+
-+ /* Filter Masker Register 2 */
-+ reg = IFX_REG_R32(PCIE_FMR2(pcie_port));
-+ reg |= PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 | PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1;
-+ IFX_REG_W32(reg, PCIE_FMR2(pcie_port));
-+
-+ /* VC0 Completion Receive Queue Control Register */
-+ reg = IFX_REG_R32(PCIE_VC0_CRQCR(pcie_port));
-+ reg &= ~PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE;
-+ reg |= SM(PCIE_VC0_TLP_QUEUE_MODE_BYPASS, PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE);
-+ IFX_REG_W32(reg, PCIE_VC0_CRQCR(pcie_port));
-+}
-+
-+static inline void pcie_rc_cfg_reg_setup(int pcie_port)
-+{
-+ /* diable ltssm */
-+ IFX_REG_W32(0, PCIE_RC_CCR(pcie_port));
-+
-+ pcie_mem_io_setup(pcie_port);
-+ pcie_msi_setup(pcie_port);
-+ pcie_pm_setup(pcie_port);
-+ pcie_bus_setup(pcie_port);
-+ pcie_device_setup(pcie_port);
-+ pcie_link_setup(pcie_port);
-+ pcie_error_setup(pcie_port);
-+ pcie_root_setup(pcie_port);
-+ pcie_vc_setup(pcie_port);
-+ pcie_port_logic_setup(pcie_port);
-+}
-+
-+static int ifx_pcie_wait_phy_link_up(int pcie_port)
-+{
-+ int i;
-+
-+ /* Wait for PHY link is up */
-+ for (i = 0; i < IFX_PCIE_PHY_LINK_UP_TIMEOUT; i++) {
-+ if (ifx_pcie_link_up(pcie_port)) {
-+ break;
-+ }
-+ udelay(100);
-+ }
-+ if (i >= IFX_PCIE_PHY_LINK_UP_TIMEOUT) {
-+ printk(KERN_ERR "%s timeout\n", __func__);
-+ return -1;
-+ }
-+
-+ /* Check data link up or not */
-+ if (!(IFX_REG_R32(PCIE_RC_DR(pcie_port)) & PCIE_RC_DR_DLL_UP)) {
-+ printk(KERN_ERR "%s DLL link is still down\n", __func__);
-+ return -1;
-+ }
-+
-+ /* Check Data link active or not */
-+ if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_DLL_ACTIVE)) {
-+ printk(KERN_ERR "%s DLL is not active\n", __func__);
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+static inline int pcie_app_loigc_setup(int pcie_port)
-+{
-+ IFX_REG_W32(PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS, PCIE_AHB_CTRL(pcie_port));
-+
-+ /* Pull PCIe EP out of reset */
-+ pcie_device_rst_deassert(pcie_port);
-+
-+ /* Start LTSSM training between RC and EP */
-+ pcie_ltssm_enable(pcie_port);
-+
-+ /* Check PHY status after enabling LTSSM */
-+ if (ifx_pcie_wait_phy_link_up(pcie_port) != 0) {
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+/*
-+ * Must be done after ltssm due to based on negotiated link
-+ * width and payload size
-+ * Update the Replay Time Limit. Empirically, some PCIe
-+ * devices take a little longer to respond than expected under
-+ * load. As a workaround for this we configure the Replay Time
-+ * Limit to the value expected for a 512 byte MPS instead of
-+ * our actual 128 byte MPS. The numbers below are directly
-+ * from the PCIe spec table 3-4/5.
-+ */
-+static inline void pcie_replay_time_update(int pcie_port)
-+{
-+ unsigned int reg;
-+ int nlw;
-+ int rtl;
-+
-+ reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port));
-+
-+ nlw = MS(reg, PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH);
-+ switch (nlw) {
-+ case PCIE_MAX_LENGTH_WIDTH_X1:
-+ rtl = 1677;
-+ break;
-+ case PCIE_MAX_LENGTH_WIDTH_X2:
-+ rtl = 867;
-+ break;
-+ case PCIE_MAX_LENGTH_WIDTH_X4:
-+ rtl = 462;
-+ break;
-+ case PCIE_MAX_LENGTH_WIDTH_X8:
-+ rtl = 258;
-+ break;
-+ default:
-+ rtl = 1677;
-+ break;
-+ }
-+ reg = IFX_REG_R32(PCIE_ALTRT(pcie_port));
-+ reg &= ~PCIE_ALTRT_REPLAY_TIME_LIMIT;
-+ reg |= SM(rtl, PCIE_ALTRT_REPLAY_TIME_LIMIT);
-+ IFX_REG_W32(reg, PCIE_ALTRT(pcie_port));
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s PCIE_ALTRT 0x%08x\n",
-+ __func__, IFX_REG_R32(PCIE_ALTRT(pcie_port)));
-+}
-+
-+/*
-+ * Table 359 Enhanced Configuration Address Mapping1)
-+ * 1) This table is defined in Table 7-1, page 341, PCI Express Base Specification v1.1
-+ * Memory Address PCI Express Configuration Space
-+ * A[(20+n-1):20] Bus Number 1 < n < 8
-+ * A[19:15] Device Number
-+ * A[14:12] Function Number
-+ * A[11:8] Extended Register Number
-+ * A[7:2] Register Number
-+ * A[1:0] Along with size of the access, used to generate Byte Enables
-+ * For VR9, only the address bits [22:0] are mapped to the configuration space:
-+ * . Address bits [22:20] select the target bus (1-of-8)1)
-+ * . Address bits [19:15] select the target device (1-of-32) on the bus
-+ * . Address bits [14:12] select the target function (1-of-8) within the device.
-+ * . Address bits [11:2] selects the target dword (1-of-1024) within the selected function.s configuration space
-+ * . Address bits [1:0] define the start byte location within the selected dword.
-+ */
-+static inline unsigned int pcie_bus_addr(u8 bus_num, u16 devfn, int where)
-+{
-+ unsigned int addr;
-+ u8 bus;
-+
-+ if (!bus_num) {
-+ /* type 0 */
-+ addr = ((PCI_SLOT(devfn) & 0x1F) << 15) | ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF)& ~3);
-+ } else {
-+ bus = bus_num;
-+ /* type 1, only support 8 buses */
-+ addr = ((bus & 0x7) << 20) | ((PCI_SLOT(devfn) & 0x1F) << 15) |
-+ ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF) & ~3);
-+ }
-+ IFX_PCIE_PRINT(PCIE_MSG_CFG, "%s: bus addr : %02x:%02x.%01x/%02x, addr=%08x\n",
-+ __func__, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn), where, addr);
-+ return addr;
-+}
-+
-+static int pcie_valid_config(int pcie_port, int bus, int dev)
-+{
-+ /* RC itself */
-+ if ((bus == 0) && (dev == 0))
-+ return 1;
-+
-+ /* No physical link */
-+ if (!ifx_pcie_link_up(pcie_port))
-+ return 0;
-+
-+ /* Bus zero only has RC itself
-+ * XXX, check if EP will be integrated
-+ */
-+ if ((bus == 0) && (dev != 0))
-+ return 0;
-+
-+ /* Maximum 8 buses supported for VRX */
-+ if (bus > 9)
-+ return 0;
-+
-+ /*
-+ * PCIe is PtP link, one bus only supports only one device
-+ * except bus zero and PCIe switch which is virtual bus device
-+ * The following two conditions really depends on the system design
-+ * and attached the device.
-+ * XXX, how about more new switch
-+ */
-+ if ((bus == 1) && (dev != 0))
-+ return 0;
-+
-+ if ((bus >= 3) && (dev != 0))
-+ return 0;
-+ return 1;
-+}
-+
-+static inline unsigned int ifx_pcie_cfg_rd(int pcie_port, unsigned int reg)
-+{
-+ return IFX_REG_R32((volatile unsigned int *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg));
-+}
-+
-+static inline void ifx_pcie_cfg_wr(int pcie_port, unsigned int reg, unsigned int val)
-+{
-+ IFX_REG_W32( val, (volatile unsigned int *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg));
-+}
-+
-+static inline unsigned int ifx_pcie_rc_cfg_rd(int pcie_port, unsigned int reg)
-+{
-+ return IFX_REG_R32((volatile unsigned int *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg));
-+}
-+
-+static inline void ifx_pcie_rc_cfg_wr(int pcie_port, unsigned int reg, unsigned int val)
-+{
-+ IFX_REG_W32(val, (volatile unsigned int *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg));
-+}
-+
-+unsigned int ifx_pcie_bus_enum_read_hack(int where, unsigned int value)
-+{
-+ unsigned int tvalue = value;
-+
-+ if (where == PCI_PRIMARY_BUS) {
-+ u8 primary, secondary, subordinate;
-+
-+ primary = tvalue & 0xFF;
-+ secondary = (tvalue >> 8) & 0xFF;
-+ subordinate = (tvalue >> 16) & 0xFF;
-+ primary += pcibios_1st_host_bus_nr();
-+ secondary += pcibios_1st_host_bus_nr();
-+ subordinate += pcibios_1st_host_bus_nr();
-+ tvalue = (tvalue & 0xFF000000) | (unsigned int)primary | (unsigned int)(secondary << 8) | (unsigned int)(subordinate << 16);
-+ }
-+ return tvalue;
-+}
-+
-+unsigned int ifx_pcie_bus_enum_write_hack(int where, unsigned int value)
-+{
-+ unsigned int tvalue = value;
-+
-+ if (where == PCI_PRIMARY_BUS) {
-+ u8 primary, secondary, subordinate;
-+
-+ primary = tvalue & 0xFF;
-+ secondary = (tvalue >> 8) & 0xFF;
-+ subordinate = (tvalue >> 16) & 0xFF;
-+ if (primary > 0 && primary != 0xFF)
-+ primary -= pcibios_1st_host_bus_nr();
-+ if (secondary > 0 && secondary != 0xFF)
-+ secondary -= pcibios_1st_host_bus_nr();
-+ if (subordinate > 0 && subordinate != 0xFF)
-+ subordinate -= pcibios_1st_host_bus_nr();
-+ tvalue = (tvalue & 0xFF000000) | (unsigned int)primary | (unsigned int)(secondary << 8) | (unsigned int)(subordinate << 16);
-+ } else if (where == PCI_SUBORDINATE_BUS) {
-+ u8 subordinate = tvalue & 0xFF;
-+ subordinate = subordinate > 0 ? subordinate - pcibios_1st_host_bus_nr() : 0;
-+ tvalue = subordinate;
-+ }
-+ return tvalue;
-+}
-+
-+/**
-+ * \fn static int ifx_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
-+ * int where, int size, unsigned int *value)
-+ * \brief Read a value from configuration space
-+ *
-+ * \param[in] bus Pointer to pci bus
-+ * \param[in] devfn PCI device function number
-+ * \param[in] where PCI register number
-+ * \param[in] size Register read size
-+ * \param[out] value Pointer to return value
-+ * \return PCIBIOS_BAD_REGISTER_NUMBER Invalid register number
-+ * \return PCIBIOS_FUNC_NOT_SUPPORTED PCI function not supported
-+ * \return PCIBIOS_DEVICE_NOT_FOUND PCI device not found
-+ * \return PCIBIOS_SUCCESSFUL OK
-+ * \ingroup IFX_PCIE_OS
-+ */
-+static int ifx_pcie_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, unsigned int *value)
-+{
-+ unsigned int data = 0;
-+ int bus_number = bus->number;
-+ static const unsigned int mask[8] = {0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0};
-+ int ret = PCIBIOS_SUCCESSFUL;
-+ struct ifx_pci_controller *ctrl = bus->sysdata;
-+ int pcie_port = ctrl->port;
-+
-+ if (unlikely(size != 1 && size != 2 && size != 4)){
-+ ret = PCIBIOS_BAD_REGISTER_NUMBER;
-+ goto out;
-+ }
-+
-+ /* Make sure the address is aligned to natural boundary */
-+ if (unlikely(((size - 1) & where))) {
-+ ret = PCIBIOS_BAD_REGISTER_NUMBER;
-+ goto out;
-+ }
-+
-+ /*
-+ * If we are second controller, we have to cheat OS so that it assume
-+ * its bus number starts from 0 in host controller
-+ */
-+ bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port);
-+
-+ /*
-+ * We need to force the bus number to be zero on the root
-+ * bus. Linux numbers the 2nd root bus to start after all
-+ * busses on root 0.
-+ */
-+ if (bus->parent == NULL)
-+ bus_number = 0;
-+
-+ /*
-+ * PCIe only has a single device connected to it. It is
-+ * always device ID 0. Don't bother doing reads for other
-+ * device IDs on the first segment.
-+ */
-+ if ((bus_number == 0) && (PCI_SLOT(devfn) != 0)) {
-+ ret = PCIBIOS_FUNC_NOT_SUPPORTED;
-+ goto out;
-+ }
-+
-+ if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) {
-+ *value = 0xffffffff;
-+ ret = PCIBIOS_DEVICE_NOT_FOUND;
-+ goto out;
-+ }
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: %02x:%02x.%01x/%02x:%01d\n", __func__, bus_number,
-+ PCI_SLOT(devfn), PCI_FUNC(devfn), where, size);
-+
-+ PCIE_IRQ_LOCK(ifx_pcie_lock);
-+ if (bus_number == 0) { /* RC itself */
-+ unsigned int t;
-+
-+ t = (where & ~3);
-+ data = ifx_pcie_rc_cfg_rd(pcie_port, t);
-+ IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: rd local cfg, offset:%08x, data:%08x\n",
-+ __func__, t, data);
-+ } else {
-+ unsigned int addr = pcie_bus_addr(bus_number, devfn, where);
-+
-+ data = ifx_pcie_cfg_rd(pcie_port, addr);
-+ if (pcie_port == IFX_PCIE_PORT0) {
-+#ifdef CONFIG_IFX_PCIE_HW_SWAP
-+ data = le32_to_cpu(data);
-+#endif /* CONFIG_IFX_PCIE_HW_SWAP */
-+ } else {
-+#ifdef CONFIG_IFX_PCIE1_HW_SWAP
-+ data = le32_to_cpu(data);
-+#endif /* CONFIG_IFX_PCIE_HW_SWAP */
-+ }
-+ }
-+ /* To get a correct PCI topology, we have to restore the bus number to OS */
-+ data = ifx_pcie_bus_enum_hack(bus, devfn, where, data, pcie_port, 1);
-+
-+ PCIE_IRQ_UNLOCK(ifx_pcie_lock);
-+ IFX_PCIE_PRINT(PCIE_MSG_READ_CFG, "%s: read config: data=%08x raw=%08x\n",
-+ __func__, (data >> (8 * (where & 3))) & mask[size & 7], data);
-+
-+ *value = (data >> (8 * (where & 3))) & mask[size & 7];
-+out:
-+ return ret;
-+}
-+
-+static unsigned int ifx_pcie_size_to_value(int where, int size, unsigned int data, unsigned int value)
-+{
-+ unsigned int shift;
-+ unsigned int tdata = data;
-+
-+ switch (size) {
-+ case 1:
-+ shift = (where & 0x3) << 3;
-+ tdata &= ~(0xffU << shift);
-+ tdata |= ((value & 0xffU) << shift);
-+ break;
-+ case 2:
-+ shift = (where & 3) << 3;
-+ tdata &= ~(0xffffU << shift);
-+ tdata |= ((value & 0xffffU) << shift);
-+ break;
-+ case 4:
-+ tdata = value;
-+ break;
-+ }
-+ return tdata;
-+}
-+
-+/**
-+ * \fn static static int ifx_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
-+ * int where, int size, unsigned int value)
-+ * \brief Write a value to PCI configuration space
-+ *
-+ * \param[in] bus Pointer to pci bus
-+ * \param[in] devfn PCI device function number
-+ * \param[in] where PCI register number
-+ * \param[in] size The register size to be written
-+ * \param[in] value The valule to be written
-+ * \return PCIBIOS_BAD_REGISTER_NUMBER Invalid register number
-+ * \return PCIBIOS_DEVICE_NOT_FOUND PCI device not found
-+ * \return PCIBIOS_SUCCESSFUL OK
-+ * \ingroup IFX_PCIE_OS
-+ */
-+static int ifx_pcie_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, unsigned int value)
-+{
-+ int bus_number = bus->number;
-+ int ret = PCIBIOS_SUCCESSFUL;
-+ struct ifx_pci_controller *ctrl = bus->sysdata;
-+ int pcie_port = ctrl->port;
-+ unsigned int tvalue = value;
-+ unsigned int data;
-+
-+ /* Make sure the address is aligned to natural boundary */
-+ if (unlikely(((size - 1) & where))) {
-+ ret = PCIBIOS_BAD_REGISTER_NUMBER;
-+ goto out;
-+ }
-+ /*
-+ * If we are second controller, we have to cheat OS so that it assume
-+ * its bus number starts from 0 in host controller
-+ */
-+ bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port);
-+
-+ /*
-+ * We need to force the bus number to be zero on the root
-+ * bus. Linux numbers the 2nd root bus to start after all
-+ * busses on root 0.
-+ */
-+ if (bus->parent == NULL)
-+ bus_number = 0;
-+
-+ if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) {
-+ ret = PCIBIOS_DEVICE_NOT_FOUND;
-+ goto out;
-+ }
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: %02x:%02x.%01x/%02x:%01d value=%08x\n", __func__,
-+ bus_number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, value);
-+
-+ /* XXX, some PCIe device may need some delay */
-+ PCIE_IRQ_LOCK(ifx_pcie_lock);
-+
-+ /*
-+ * To configure the correct bus topology using native way, we have to cheat Os so that
-+ * it can configure the PCIe hardware correctly.
-+ */
-+ tvalue = ifx_pcie_bus_enum_hack(bus, devfn, where, value, pcie_port, 0);
-+
-+ if (bus_number == 0) { /* RC itself */
-+ unsigned int t;
-+
-+ t = (where & ~3);
-+ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr local cfg, offset:%08x, fill:%08x\n", __func__, t, value);
-+ data = ifx_pcie_rc_cfg_rd(pcie_port, t);
-+ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd local cfg, offset:%08x, data:%08x\n", __func__, t, data);
-+
-+ data = ifx_pcie_size_to_value(where, size, data, tvalue);
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr local cfg, offset:%08x, value:%08x\n", __func__, t, data);
-+ ifx_pcie_rc_cfg_wr(pcie_port, t, data);
-+ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd local cfg, offset:%08x, value:%08x\n",
-+ __func__, t, ifx_pcie_rc_cfg_rd(pcie_port, t));
-+ } else {
-+ unsigned int addr = pcie_bus_addr(bus_number, devfn, where);
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: wr cfg, offset:%08x, fill:%08x\n", __func__, addr, value);
-+ data = ifx_pcie_cfg_rd(pcie_port, addr);
-+ if (pcie_port == IFX_PCIE_PORT0) {
-+#ifdef CONFIG_IFX_PCIE_HW_SWAP
-+ data = le32_to_cpu(data);
-+#endif /* CONFIG_IFX_PCIE_HW_SWAP */
-+ } else {
-+#ifdef CONFIG_IFX_PCIE1_HW_SWAP
-+ data = le32_to_cpu(data);
-+#endif /* CONFIG_IFX_PCIE_HW_SWAP */
-+ }
-+ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG,"%s: rd cfg, offset:%08x, data:%08x\n", __func__, addr, data);
-+
-+ data = ifx_pcie_size_to_value(where, size, data, tvalue);
-+ if (pcie_port == IFX_PCIE_PORT0) {
-+#ifdef CONFIG_IFX_PCIE_HW_SWAP
-+ data = cpu_to_le32(data);
-+#endif /* CONFIG_IFX_PCIE_HW_SWAP */
-+ } else {
-+#ifdef CONFIG_IFX_PCIE1_HW_SWAP
-+ data = cpu_to_le32(data);
-+#endif /* CONFIG_IFX_PCIE_HW_SWAP */
-+ }
-+ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: wr cfg, offset:%08x, value:%08x\n", __func__, addr, data);
-+ ifx_pcie_cfg_wr(pcie_port, addr, data);
-+ IFX_PCIE_PRINT(PCIE_MSG_WRITE_CFG, "%s: rd cfg, offset:%08x, value:%08x\n",
-+ __func__, addr, ifx_pcie_cfg_rd(pcie_port, addr));
-+ }
-+ PCIE_IRQ_UNLOCK(ifx_pcie_lock);
-+out:
-+ return ret;
-+}
-+
-+static struct resource ifx_pcie_io_resource = {
-+ .name = "PCIe0 I/O space",
-+ .start = PCIE_IO_PHY_BASE,
-+ .end = PCIE_IO_PHY_END,
-+ .flags = IORESOURCE_IO,
-+};
-+
-+static struct resource ifx_pcie_mem_resource = {
-+ .name = "PCIe0 Memory space",
-+ .start = PCIE_MEM_PHY_BASE,
-+ .end = PCIE_MEM_PHY_END,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct pci_ops ifx_pcie_ops = {
-+ .read = ifx_pcie_read_config,
-+ .write = ifx_pcie_write_config,
-+};
-+
-+static struct ifx_pci_controller ifx_pcie_controller[IFX_PCIE_CORE_NR] = {
-+ {
-+ .pcic = {
-+ .pci_ops = &ifx_pcie_ops,
-+ .mem_resource = &ifx_pcie_mem_resource,
-+ .io_resource = &ifx_pcie_io_resource,
-+ },
-+ .port = IFX_PCIE_PORT0,
-+ },
-+};
-+
-+static inline void pcie_core_int_clear_all(int pcie_port)
-+{
-+ unsigned int reg;
-+ reg = IFX_REG_R32(PCIE_IRNCR(pcie_port));
-+ reg &= PCIE_RC_CORE_COMBINED_INT;
-+ IFX_REG_W32(reg, PCIE_IRNCR(pcie_port));
-+}
-+
-+static irqreturn_t pcie_rc_core_isr(int irq, void *dev_id)
-+{
-+ struct ifx_pci_controller *ctrl = (struct ifx_pci_controller *)dev_id;
-+ int pcie_port = ctrl->port;
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_ISR, "PCIe RC error intr %d\n", irq);
-+ pcie_core_int_clear_all(pcie_port);
-+ return IRQ_HANDLED;
-+}
-+
-+static int pcie_rc_core_int_init(int pcie_port)
-+{
-+ int ret;
-+
-+ /* Enable core interrupt */
-+ IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNEN(pcie_port));
-+
-+ /* Clear it first */
-+ IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNCR(pcie_port));
-+ ret = request_irq(pcie_irqs[pcie_port].ir_irq.irq, pcie_rc_core_isr, IRQF_DISABLED,
-+ pcie_irqs[pcie_port].ir_irq.name, &ifx_pcie_controller[pcie_port]);
-+ if (ret)
-+ printk(KERN_ERR "%s request irq %d failed\n", __func__, IFX_PCIE_IR);
-+
-+ return ret;
-+}
-+
-+int ifx_pcie_bios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ unsigned int irq_bit = 0;
-+ int irq = 0;
-+ struct ifx_pci_controller *ctrl = dev->bus->sysdata;
-+ int pcie_port = ctrl->port;
-+
-+ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s port %d dev %s slot %d pin %d \n", __func__, pcie_port, pci_name(dev), slot, pin);
-+
-+ if ((pin == PCIE_LEGACY_DISABLE) || (pin > PCIE_LEGACY_INT_MAX)) {
-+ printk(KERN_WARNING "WARNING: dev %s: invalid interrupt pin %d\n", pci_name(dev), pin);
-+ return -1;
-+ }
-+ /* Pin index so minus one */
-+ irq_bit = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq_bit;
-+ irq = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq;
-+ IFX_REG_SET_BIT(irq_bit, PCIE_IRNEN(pcie_port));
-+ IFX_REG_SET_BIT(irq_bit, PCIE_IRNCR(pcie_port));
-+ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s irq %d assigned\n", __func__, pci_name(dev), irq);
-+ return irq;
-+}
-+
-+/**
-+ * \fn int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev)
-+ * \brief Called to perform platform specific PCI setup
-+ *
-+ * \param[in] dev The Linux PCI device structure for the device to map
-+ * \return OK
-+ * \ingroup IFX_PCIE_OS
-+ */
-+int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev)
-+{
-+ u16 config;
-+ unsigned int dconfig;
-+ int pos;
-+ /* Enable reporting System errors and parity errors on all devices */
-+ /* Enable parity checking and error reporting */
-+ pci_read_config_word(dev, PCI_COMMAND, &config);
-+ config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR /*| PCI_COMMAND_INVALIDATE |
-+ PCI_COMMAND_FAST_BACK*/;
-+ pci_write_config_word(dev, PCI_COMMAND, config);
-+
-+ if (dev->subordinate) {
-+ /* Set latency timers on sub bridges */
-+ pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 0x40); /* XXX, */
-+ /* More bridge error detection */
-+ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
-+ config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
-+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
-+ }
-+ /* Enable the PCIe normal error reporting */
-+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
-+ if (pos) {
-+ /* Disable system error generation in response to error messages */
-+ pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &config);
-+ config &= ~(PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE | PCI_EXP_RTCTL_SEFEE);
-+ pci_write_config_word(dev, pos + PCI_EXP_RTCTL, config);
-+
-+ /* Clear PCIE Capability's Device Status */
-+ pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &config);
-+ pci_write_config_word(dev, pos + PCI_EXP_DEVSTA, config);
-+
-+ /* Update Device Control */
-+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
-+ /* Correctable Error Reporting */
-+ config |= PCI_EXP_DEVCTL_CERE;
-+ /* Non-Fatal Error Reporting */
-+ config |= PCI_EXP_DEVCTL_NFERE;
-+ /* Fatal Error Reporting */
-+ config |= PCI_EXP_DEVCTL_FERE;
-+ /* Unsupported Request */
-+ config |= PCI_EXP_DEVCTL_URRE;
-+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
-+ }
-+
-+ /* Find the Advanced Error Reporting capability */
-+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
-+ if (pos) {
-+ /* Clear Uncorrectable Error Status */
-+ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &dconfig);
-+ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, dconfig);
-+ /* Enable reporting of all uncorrectable errors */
-+ /* Uncorrectable Error Mask - turned on bits disable errors */
-+ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
-+ /*
-+ * Leave severity at HW default. This only controls if
-+ * errors are reported as uncorrectable or
-+ * correctable, not if the error is reported.
-+ */
-+ /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
-+ /* Clear Correctable Error Status */
-+ pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
-+ pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
-+ /* Enable reporting of all correctable errors */
-+ /* Correctable Error Mask - turned on bits disable errors */
-+ pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
-+ /* Advanced Error Capabilities */
-+ pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
-+ /* ECRC Generation Enable */
-+ if (dconfig & PCI_ERR_CAP_ECRC_GENC)
-+ dconfig |= PCI_ERR_CAP_ECRC_GENE;
-+ /* ECRC Check Enable */
-+ if (dconfig & PCI_ERR_CAP_ECRC_CHKC)
-+ dconfig |= PCI_ERR_CAP_ECRC_CHKE;
-+ pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
-+
-+ /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
-+ /* Enable Root Port's interrupt in response to error messages */
-+ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
-+ PCI_ERR_ROOT_CMD_COR_EN |
-+ PCI_ERR_ROOT_CMD_NONFATAL_EN |
-+ PCI_ERR_ROOT_CMD_FATAL_EN);
-+ /* Clear the Root status register */
-+ pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
-+ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
-+ }
-+ /* WAR, only 128 MRRS is supported, force all EPs to support this value */
-+ pcie_set_readrq(dev, 128);
-+ return 0;
-+}
-+
-+static void pcie_phy_rst(int pcie_port)
-+{
-+ pcie_phy_rst_assert(pcie_port);
-+ pcie_phy_rst_deassert(pcie_port);
-+ /* Make sure PHY PLL is stable */
-+ udelay(20);
-+}
-+
-+static int pcie_rc_initialize(int pcie_port)
-+{
-+ int i;
-+
-+ pcie_rcu_endian_setup(pcie_port);
-+
-+ pcie_ep_gpio_rst_init(pcie_port);
-+
-+ /*
-+ * XXX, PCIe elastic buffer bug will cause not to be detected. One more
-+ * reset PCIe PHY will solve this issue
-+ */
-+ for (i = 0; i < IFX_PCIE_PHY_LOOP_CNT; i++) {
-+ /* Disable PCIe PHY Analog part for sanity check */
-+ pcie_phy_pmu_disable(pcie_port);
-+ pcie_phy_rst(pcie_port);
-+ /* PCIe Core reset enabled, low active, sw programmed */
-+ pcie_core_rst_assert(pcie_port);
-+ /* Put PCIe EP in reset status */
-+ pcie_device_rst_assert(pcie_port);
-+ /* PCI PHY & Core reset disabled, high active, sw programmed */
-+ pcie_core_rst_deassert(pcie_port);
-+ /* Already in a quiet state, program PLL, enable PHY, check ready bit */
-+ pcie_phy_clock_mode_setup(pcie_port);
-+ /* Enable PCIe PHY and Clock */
-+ pcie_core_pmu_setup(pcie_port);
-+ /* Clear status registers */
-+ pcie_status_register_clear(pcie_port);
-+#ifdef CONFIG_PCI_MSI
-+ pcie_msi_init(pcie_port);
-+#endif /* CONFIG_PCI_MSI */
-+ pcie_rc_cfg_reg_setup(pcie_port);
-+
-+ /* Once link is up, break out */
-+ if (pcie_app_loigc_setup(pcie_port) == 0)
-+ break;
-+ }
-+ if (i >= IFX_PCIE_PHY_LOOP_CNT) {
-+ printk(KERN_ERR "%s link up failed!!!!!\n", __func__);
-+ return -EIO;
-+ }
-+ /* NB, don't increase ACK/NACK timer timeout value, which will cause a lot of COR errors */
-+ pcie_replay_time_update(pcie_port);
-+ return 0;
-+}
-+
-+static int inline ifx_pcie_startup_port_nr(void)
-+{
-+ int pcie_port = IFX_PCIE_PORT0;
-+
-+ pcie_port = IFX_PCIE_PORT0;
-+ return pcie_port;
-+}
-+
-+/**
-+ * \fn static int __init ifx_pcie_bios_init(void)
-+ * \brief Initialize the IFX PCIe controllers
-+ *
-+ * \return -EIO PCIe PHY link is not up
-+ * \return -ENOMEM Configuration/IO space failed to map
-+ * \return 0 OK
-+ * \ingroup IFX_PCIE_OS
-+ */
-+extern int (*ltqpci_plat_arch_init)(struct pci_dev *dev);
-+extern int (*ltqpci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin);
-+static int __devinit ltq_pcie_probe(struct platform_device *pdev)
-+{
-+ char ver_str[128] = {0};
-+ void __iomem *io_map_base;
-+ int pcie_port;
-+ int startup_port;
-+ ltqpci_map_irq = ifx_pcie_bios_map_irq;
-+ ltqpci_plat_arch_init = ifx_pcie_bios_plat_dev_init;
-+ /* Enable AHB Master/ Slave */
-+ pcie_ahb_pmu_setup();
-+
-+ startup_port = ifx_pcie_startup_port_nr();
-+
-+ ltq_gpio_request(&pdev->dev, IFX_PCIE_GPIO_RESET, 0, 1, "pcie-reset");
-+
-+ for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){
-+ if (pcie_rc_initialize(pcie_port) == 0) {
-+ /* Otherwise, warning will pop up */
-+ io_map_base = ioremap(PCIE_IO_PHY_PORT_TO_BASE(pcie_port), PCIE_IO_SIZE);
-+ if (io_map_base == NULL)
-+ return -ENOMEM;
-+ ifx_pcie_controller[pcie_port].pcic.io_map_base = (unsigned long)io_map_base;
-+ register_pci_controller(&ifx_pcie_controller[pcie_port].pcic);
-+ /* XXX, clear error status */
-+ pcie_rc_core_int_init(pcie_port);
-+ }
-+ }
-+
-+ printk(KERN_INFO "%s", ver_str);
-+return 0;
-+}
-+
-+static struct platform_driver ltq_pcie_driver = {
-+ .probe = ltq_pcie_probe,
-+ .driver = {
-+ .name = "pcie-xway",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+int __init pciebios_init(void)
-+{
-+ return platform_driver_register(<q_pcie_driver);
-+}
-+
-+arch_initcall(pciebios_init);
---- /dev/null
-+++ b/arch/mips/pci/pcie-lantiq.h
-@@ -0,0 +1,1305 @@
-+/******************************************************************************
-+**
-+** FILE NAME : ifxmips_pcie_reg.h
-+** PROJECT : IFX UEIP for VRX200
-+** MODULES : PCIe module
-+**
-+** DATE : 02 Mar 2009
-+** AUTHOR : Lei Chuanhua
-+** DESCRIPTION : PCIe Root Complex Driver
-+** COPYRIGHT : Copyright (c) 2009
-+** Infineon Technologies AG
-+** Am Campeon 1-12, 85579 Neubiberg, Germany
-+**
-+** This program is free software; you can redistribute it and/or modify
-+** it under the terms of the GNU General Public License as published by
-+** the Free Software Foundation; either version 2 of the License, or
-+** (at your option) any later version.
-+** HISTORY
-+** $Version $Date $Author $Comment
-+** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version
-+*******************************************************************************/
-+#ifndef IFXMIPS_PCIE_REG_H
-+#define IFXMIPS_PCIE_REG_H
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/interrupt.h>
-+/*!
-+ \file ifxmips_pcie_reg.h
-+ \ingroup IFX_PCIE
-+ \brief header file for PCIe module register definition
-+*/
-+/* PCIe Address Mapping Base */
-+#define PCIE_CFG_PHY_BASE 0x1D000000UL
-+#define PCIE_CFG_BASE (KSEG1 + PCIE_CFG_PHY_BASE)
-+#define PCIE_CFG_SIZE (8 * 1024 * 1024)
-+
-+#define PCIE_MEM_PHY_BASE 0x1C000000UL
-+#define PCIE_MEM_BASE (KSEG1 + PCIE_MEM_PHY_BASE)
-+#define PCIE_MEM_SIZE (16 * 1024 * 1024)
-+#define PCIE_MEM_PHY_END (PCIE_MEM_PHY_BASE + PCIE_MEM_SIZE - 1)
-+
-+#define PCIE_IO_PHY_BASE 0x1D800000UL
-+#define PCIE_IO_BASE (KSEG1 + PCIE_IO_PHY_BASE)
-+#define PCIE_IO_SIZE (1 * 1024 * 1024)
-+#define PCIE_IO_PHY_END (PCIE_IO_PHY_BASE + PCIE_IO_SIZE - 1)
-+
-+#define PCIE_RC_CFG_BASE (KSEG1 + 0x1D900000)
-+#define PCIE_APP_LOGIC_REG (KSEG1 + 0x1E100900)
-+#define PCIE_MSI_PHY_BASE 0x1F600000UL
-+
-+#define PCIE_PDI_PHY_BASE 0x1F106800UL
-+#define PCIE_PDI_BASE (KSEG1 + PCIE_PDI_PHY_BASE)
-+#define PCIE_PDI_SIZE 0x400
-+
-+#define PCIE1_CFG_PHY_BASE 0x19000000UL
-+#define PCIE1_CFG_BASE (KSEG1 + PCIE1_CFG_PHY_BASE)
-+#define PCIE1_CFG_SIZE (8 * 1024 * 1024)
-+
-+#define PCIE1_MEM_PHY_BASE 0x18000000UL
-+#define PCIE1_MEM_BASE (KSEG1 + PCIE1_MEM_PHY_BASE)
-+#define PCIE1_MEM_SIZE (16 * 1024 * 1024)
-+#define PCIE1_MEM_PHY_END (PCIE1_MEM_PHY_BASE + PCIE1_MEM_SIZE - 1)
-+
-+#define PCIE1_IO_PHY_BASE 0x19800000UL
-+#define PCIE1_IO_BASE (KSEG1 + PCIE1_IO_PHY_BASE)
-+#define PCIE1_IO_SIZE (1 * 1024 * 1024)
-+#define PCIE1_IO_PHY_END (PCIE1_IO_PHY_BASE + PCIE1_IO_SIZE - 1)
-+
-+#define PCIE1_RC_CFG_BASE (KSEG1 + 0x19900000)
-+#define PCIE1_APP_LOGIC_REG (KSEG1 + 0x1E100700)
-+#define PCIE1_MSI_PHY_BASE 0x1F400000UL
-+
-+#define PCIE1_PDI_PHY_BASE 0x1F700400UL
-+#define PCIE1_PDI_BASE (KSEG1 + PCIE1_PDI_PHY_BASE)
-+#define PCIE1_PDI_SIZE 0x400
-+
-+#define PCIE_CFG_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_CFG_BASE) : (PCIE_CFG_BASE))
-+#define PCIE_MEM_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_BASE) : (PCIE_MEM_BASE))
-+#define PCIE_IO_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_BASE) : (PCIE_IO_BASE))
-+#define PCIE_MEM_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_PHY_BASE) : (PCIE_MEM_PHY_BASE))
-+#define PCIE_MEM_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_MEM_PHY_END) : (PCIE_MEM_PHY_END))
-+#define PCIE_IO_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_PHY_BASE) : (PCIE_IO_PHY_BASE))
-+#define PCIE_IO_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_IO_PHY_END) : (PCIE_IO_PHY_END))
-+#define PCIE_APP_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_APP_LOGIC_REG) : (PCIE_APP_LOGIC_REG))
-+#define PCIE_RC_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_RC_CFG_BASE) : (PCIE_RC_CFG_BASE))
-+#define PCIE_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_PDI_BASE) : (PCIE_PDI_BASE))
-+
-+/* PCIe Application Logic Register */
-+/* RC Core Control Register */
-+#define PCIE_RC_CCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x10)
-+/* This should be enabled after initializing configuratin registers
-+ * Also should check link status retraining bit
-+ */
-+#define PCIE_RC_CCR_LTSSM_ENABLE 0x00000001 /* Enable LTSSM to continue link establishment */
-+
-+/* RC Core Debug Register */
-+#define PCIE_RC_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x14)
-+#define PCIE_RC_DR_DLL_UP 0x00000001 /* Data Link Layer Up */
-+#define PCIE_RC_DR_CURRENT_POWER_STATE 0x0000000E /* Current Power State */
-+#define PCIE_RC_DR_CURRENT_POWER_STATE_S 1
-+#define PCIE_RC_DR_CURRENT_LTSSM_STATE 0x000001F0 /* Current LTSSM State */
-+#define PCIE_RC_DR_CURRENT_LTSSM_STATE_S 4
-+
-+#define PCIE_RC_DR_PM_DEV_STATE 0x00000E00 /* Power Management D-State */
-+#define PCIE_RC_DR_PM_DEV_STATE_S 9
-+
-+#define PCIE_RC_DR_PM_ENABLED 0x00001000 /* Power Management State from PMU */
-+#define PCIE_RC_DR_PME_EVENT_ENABLED 0x00002000 /* Power Management Event Enable State */
-+#define PCIE_RC_DR_AUX_POWER_ENABLED 0x00004000 /* Auxiliary Power Enable */
-+
-+/* Current Power State Definition */
-+enum {
-+ PCIE_RC_DR_D0 = 0,
-+ PCIE_RC_DR_D1, /* Not supported */
-+ PCIE_RC_DR_D2, /* Not supported */
-+ PCIE_RC_DR_D3,
-+ PCIE_RC_DR_UN,
-+};
-+
-+/* PHY Link Status Register */
-+#define PCIE_PHY_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x18)
-+#define PCIE_PHY_SR_PHY_LINK_UP 0x00000001 /* PHY Link Up/Down Indicator */
-+
-+/* Electromechanical Control Register */
-+#define PCIE_EM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x1C)
-+#define PCIE_EM_CR_CARD_IS_PRESENT 0x00000001 /* Card Presence Detect State */
-+#define PCIE_EM_CR_MRL_OPEN 0x00000002 /* MRL Sensor State */
-+#define PCIE_EM_CR_POWER_FAULT_SET 0x00000004 /* Power Fault Detected */
-+#define PCIE_EM_CR_MRL_SENSOR_SET 0x00000008 /* MRL Sensor Changed */
-+#define PCIE_EM_CR_PRESENT_DETECT_SET 0x00000010 /* Card Presense Detect Changed */
-+#define PCIE_EM_CR_CMD_CPL_INT_SET 0x00000020 /* Command Complete Interrupt */
-+#define PCIE_EM_CR_SYS_INTERLOCK_SET 0x00000040 /* System Electromechanical IterLock Engaged */
-+#define PCIE_EM_CR_ATTENTION_BUTTON_SET 0x00000080 /* Attention Button Pressed */
-+
-+/* Interrupt Status Register */
-+#define PCIE_IR_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x20)
-+#define PCIE_IR_SR_PME_CAUSE_MSI 0x00000002 /* MSI caused by PME */
-+#define PCIE_IR_SR_HP_PME_WAKE_GEN 0x00000004 /* Hotplug PME Wake Generation */
-+#define PCIE_IR_SR_HP_MSI 0x00000008 /* Hotplug MSI */
-+#define PCIE_IR_SR_AHB_LU_ERR 0x00000030 /* AHB Bridge Lookup Error Signals */
-+#define PCIE_IR_SR_AHB_LU_ERR_S 4
-+#define PCIE_IR_SR_INT_MSG_NUM 0x00003E00 /* Interrupt Message Number */
-+#define PCIE_IR_SR_INT_MSG_NUM_S 9
-+#define PCIE_IR_SR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */
-+#define PCIE_IR_SR_AER_INT_MSG_NUM_S 27
-+
-+/* Message Control Register */
-+#define PCIE_MSG_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x30)
-+#define PCIE_MSG_CR_GEN_PME_TURN_OFF_MSG 0x00000001 /* Generate PME Turn Off Message */
-+#define PCIE_MSG_CR_GEN_UNLOCK_MSG 0x00000002 /* Generate Unlock Message */
-+
-+#define PCIE_VDM_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x34)
-+
-+/* Vendor-Defined Message Requester ID Register */
-+#define PCIE_VDM_RID(X) (PCIE_APP_PORT_TO_BASE (X) + 0x38)
-+#define PCIE_VDM_RID_VENROR_MSG_REQ_ID 0x0000FFFF
-+#define PCIE_VDM_RID_VDMRID_S 0
-+
-+/* ASPM Control Register */
-+#define PCIE_ASPM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x40)
-+#define PCIE_ASPM_CR_HOT_RST 0x00000001 /* Hot Reset Request to the downstream device */
-+#define PCIE_ASPM_CR_REQ_EXIT_L1 0x00000002 /* Request to Exit L1 */
-+#define PCIE_ASPM_CR_REQ_ENTER_L1 0x00000004 /* Request to Enter L1 */
-+
-+/* Vendor Message DW0 Register */
-+#define PCIE_VM_MSG_DW0(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x50)
-+#define PCIE_VM_MSG_DW0_TYPE 0x0000001F /* Message type */
-+#define PCIE_VM_MSG_DW0_TYPE_S 0
-+#define PCIE_VM_MSG_DW0_FORMAT 0x00000060 /* Format */
-+#define PCIE_VM_MSG_DW0_FORMAT_S 5
-+#define PCIE_VM_MSG_DW0_TC 0x00007000 /* Traffic Class */
-+#define PCIE_VM_MSG_DW0_TC_S 12
-+#define PCIE_VM_MSG_DW0_ATTR 0x000C0000 /* Atrributes */
-+#define PCIE_VM_MSG_DW0_ATTR_S 18
-+#define PCIE_VM_MSG_DW0_EP_TLP 0x00100000 /* Poisoned TLP */
-+#define PCIE_VM_MSG_DW0_TD 0x00200000 /* TLP Digest */
-+#define PCIE_VM_MSG_DW0_LEN 0xFFC00000 /* Length */
-+#define PCIE_VM_MSG_DW0_LEN_S 22
-+
-+/* Format Definition */
-+enum {
-+ PCIE_VM_MSG_FORMAT_00 = 0, /* 3DW Hdr, no data*/
-+ PCIE_VM_MSG_FORMAT_01, /* 4DW Hdr, no data */
-+ PCIE_VM_MSG_FORMAT_10, /* 3DW Hdr, with data */
-+ PCIE_VM_MSG_FORMAT_11, /* 4DW Hdr, with data */
-+};
-+
-+/* Traffic Class Definition */
-+enum {
-+ PCIE_VM_MSG_TC0 = 0,
-+ PCIE_VM_MSG_TC1,
-+ PCIE_VM_MSG_TC2,
-+ PCIE_VM_MSG_TC3,
-+ PCIE_VM_MSG_TC4,
-+ PCIE_VM_MSG_TC5,
-+ PCIE_VM_MSG_TC6,
-+ PCIE_VM_MSG_TC7,
-+};
-+
-+/* Attributes Definition */
-+enum {
-+ PCIE_VM_MSG_ATTR_00 = 0, /* RO and No Snoop cleared */
-+ PCIE_VM_MSG_ATTR_01, /* RO cleared , No Snoop set */
-+ PCIE_VM_MSG_ATTR_10, /* RO set, No Snoop cleared*/
-+ PCIE_VM_MSG_ATTR_11, /* RO and No Snoop set */
-+};
-+
-+/* Payload Size Definition */
-+#define PCIE_VM_MSG_LEN_MIN 0
-+#define PCIE_VM_MSG_LEN_MAX 1024
-+
-+/* Vendor Message DW1 Register */
-+#define PCIE_VM_MSG_DW1(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x54)
-+#define PCIE_VM_MSG_DW1_FUNC_NUM 0x00000070 /* Function Number */
-+#define PCIE_VM_MSG_DW1_FUNC_NUM_S 8
-+#define PCIE_VM_MSG_DW1_CODE 0x00FF0000 /* Message Code */
-+#define PCIE_VM_MSG_DW1_CODE_S 16
-+#define PCIE_VM_MSG_DW1_TAG 0xFF000000 /* Tag */
-+#define PCIE_VM_MSG_DW1_TAG_S 24
-+
-+#define PCIE_VM_MSG_DW2(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x58)
-+#define PCIE_VM_MSG_DW3(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x5C)
-+
-+/* Vendor Message Request Register */
-+#define PCIE_VM_MSG_REQR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x60)
-+#define PCIE_VM_MSG_REQR_REQ 0x00000001 /* Vendor Message Request */
-+
-+
-+/* AHB Slave Side Band Control Register */
-+#define PCIE_AHB_SSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x70)
-+#define PCIE_AHB_SSB_REQ_BCM 0x00000001 /* Slave Reques BCM filed */
-+#define PCIE_AHB_SSB_REQ_EP 0x00000002 /* Slave Reques EP filed */
-+#define PCIE_AHB_SSB_REQ_TD 0x00000004 /* Slave Reques TD filed */
-+#define PCIE_AHB_SSB_REQ_ATTR 0x00000018 /* Slave Reques Attribute number */
-+#define PCIE_AHB_SSB_REQ_ATTR_S 3
-+#define PCIE_AHB_SSB_REQ_TC 0x000000E0 /* Slave Request TC Field */
-+#define PCIE_AHB_SSB_REQ_TC_S 5
-+
-+/* AHB Master SideBand Ctrl Register */
-+#define PCIE_AHB_MSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x74)
-+#define PCIE_AHB_MSB_RESP_ATTR 0x00000003 /* Master Response Attribute number */
-+#define PCIE_AHB_MSB_RESP_ATTR_S 0
-+#define PCIE_AHB_MSB_RESP_BAD_EOT 0x00000004 /* Master Response Badeot filed */
-+#define PCIE_AHB_MSB_RESP_BCM 0x00000008 /* Master Response BCM filed */
-+#define PCIE_AHB_MSB_RESP_EP 0x00000010 /* Master Response EP filed */
-+#define PCIE_AHB_MSB_RESP_TD 0x00000020 /* Master Response TD filed */
-+#define PCIE_AHB_MSB_RESP_FUN_NUM 0x000003C0 /* Master Response Function number */
-+#define PCIE_AHB_MSB_RESP_FUN_NUM_S 6
-+
-+/* AHB Control Register, fixed bus enumeration exception */
-+#define PCIE_AHB_CTRL(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x78)
-+#define PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS 0x00000001
-+
-+/* Interrupt Enalbe Register */
-+#define PCIE_IRNEN(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF4)
-+#define PCIE_IRNCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF8)
-+#define PCIE_IRNICR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xFC)
-+
-+/* PCIe interrupt enable/control/capture register definition */
-+#define PCIE_IRN_AER_REPORT 0x00000001 /* AER Interrupt */
-+#define PCIE_IRN_AER_MSIX 0x00000002 /* Advanced Error MSI-X Interrupt */
-+#define PCIE_IRN_PME 0x00000004 /* PME Interrupt */
-+#define PCIE_IRN_HOTPLUG 0x00000008 /* Hotplug Interrupt */
-+#define PCIE_IRN_RX_VDM_MSG 0x00000010 /* Vendor-Defined Message Interrupt */
-+#define PCIE_IRN_RX_CORRECTABLE_ERR_MSG 0x00000020 /* Correctable Error Message Interrupt */
-+#define PCIE_IRN_RX_NON_FATAL_ERR_MSG 0x00000040 /* Non-fatal Error Message */
-+#define PCIE_IRN_RX_FATAL_ERR_MSG 0x00000080 /* Fatal Error Message */
-+#define PCIE_IRN_RX_PME_MSG 0x00000100 /* PME Message Interrupt */
-+#define PCIE_IRN_RX_PME_TURNOFF_ACK 0x00000200 /* PME Turnoff Ack Message Interrupt */
-+#define PCIE_IRN_AHB_BR_FATAL_ERR 0x00000400 /* AHB Fatal Error Interrupt */
-+#define PCIE_IRN_LINK_AUTO_BW_STATUS 0x00000800 /* Link Auto Bandwidth Status Interrupt */
-+#define PCIE_IRN_BW_MGT 0x00001000 /* Bandwidth Managment Interrupt */
-+#define PCIE_IRN_INTA 0x00002000 /* INTA */
-+#define PCIE_IRN_INTB 0x00004000 /* INTB */
-+#define PCIE_IRN_INTC 0x00008000 /* INTC */
-+#define PCIE_IRN_INTD 0x00010000 /* INTD */
-+#define PCIE_IRN_WAKEUP 0x00020000 /* Wake up Interrupt */
-+
-+#define PCIE_RC_CORE_COMBINED_INT (PCIE_IRN_AER_REPORT | PCIE_IRN_AER_MSIX | PCIE_IRN_PME | \
-+ PCIE_IRN_HOTPLUG | PCIE_IRN_RX_VDM_MSG | PCIE_IRN_RX_CORRECTABLE_ERR_MSG |\
-+ PCIE_IRN_RX_NON_FATAL_ERR_MSG | PCIE_IRN_RX_FATAL_ERR_MSG | \
-+ PCIE_IRN_RX_PME_MSG | PCIE_IRN_RX_PME_TURNOFF_ACK | PCIE_IRN_AHB_BR_FATAL_ERR | \
-+ PCIE_IRN_LINK_AUTO_BW_STATUS | PCIE_IRN_BW_MGT)
-+/* PCIe RC Configuration Register */
-+#define PCIE_VDID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x00)
-+
-+/* Bit definition from pci_reg.h */
-+#define PCIE_PCICMDSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x04)
-+#define PCIE_CCRID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x08)
-+#define PCIE_CLSLTHTBR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x0C) /* EP only */
-+/* BAR0, BAR1,Only necessary if the bridges implements a device-specific register set or memory buffer */
-+#define PCIE_BAR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10) /* Not used*/
-+#define PCIE_BAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14) /* Not used */
-+
-+#define PCIE_BNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x18) /* Mandatory */
-+/* Bus Number Register bits */
-+#define PCIE_BNR_PRIMARY_BUS_NUM 0x000000FF
-+#define PCIE_BNR_PRIMARY_BUS_NUM_S 0
-+#define PCIE_PNR_SECONDARY_BUS_NUM 0x0000FF00
-+#define PCIE_PNR_SECONDARY_BUS_NUM_S 8
-+#define PCIE_PNR_SUB_BUS_NUM 0x00FF0000
-+#define PCIE_PNR_SUB_BUS_NUM_S 16
-+
-+/* IO Base/Limit Register bits */
-+#define PCIE_IOBLSECS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x1C) /* RC only */
-+#define PCIE_IOBLSECS_32BIT_IO_ADDR 0x00000001
-+#define PCIE_IOBLSECS_IO_BASE_ADDR 0x000000F0
-+#define PCIE_IOBLSECS_IO_BASE_ADDR_S 4
-+#define PCIE_IOBLSECS_32BIT_IOLIMT 0x00000100
-+#define PCIE_IOBLSECS_IO_LIMIT_ADDR 0x0000F000
-+#define PCIE_IOBLSECS_IO_LIMIT_ADDR_S 12
-+
-+/* Non-prefetchable Memory Base/Limit Register bit */
-+#define PCIE_MBML(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x20) /* RC only */
-+#define PCIE_MBML_MEM_BASE_ADDR 0x0000FFF0
-+#define PCIE_MBML_MEM_BASE_ADDR_S 4
-+#define PCIE_MBML_MEM_LIMIT_ADDR 0xFFF00000
-+#define PCIE_MBML_MEM_LIMIT_ADDR_S 20
-+
-+/* Prefetchable Memory Base/Limit Register bit */
-+#define PCIE_PMBL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x24) /* RC only */
-+#define PCIE_PMBL_64BIT_ADDR 0x00000001
-+#define PCIE_PMBL_UPPER_12BIT 0x0000FFF0
-+#define PCIE_PMBL_UPPER_12BIT_S 4
-+#define PCIE_PMBL_E64MA 0x00010000
-+#define PCIE_PMBL_END_ADDR 0xFFF00000
-+#define PCIE_PMBL_END_ADDR_S 20
-+#define PCIE_PMBU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x28) /* RC only */
-+#define PCIE_PMLU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x2C) /* RC only */
-+
-+/* I/O Base/Limit Upper 16 bits register */
-+#define PCIE_IO_BANDL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x30) /* RC only */
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE 0x0000FFFF
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE_S 0
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT 0xFFFF0000
-+#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT_S 16
-+
-+#define PCIE_CPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x34)
-+#define PCIE_EBBAR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x38)
-+
-+/* Interrupt and Secondary Bridge Control Register */
-+#define PCIE_INTRBCTRL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x3C)
-+
-+#define PCIE_INTRBCTRL_INT_LINE 0x000000FF
-+#define PCIE_INTRBCTRL_INT_LINE_S 0
-+#define PCIE_INTRBCTRL_INT_PIN 0x0000FF00
-+#define PCIE_INTRBCTRL_INT_PIN_S 8
-+#define PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE 0x00010000 /* #PERR */
-+#define PCIE_INTRBCTRL_SERR_ENABLE 0x00020000 /* #SERR */
-+#define PCIE_INTRBCTRL_ISA_ENABLE 0x00040000 /* ISA enable, IO 64KB only */
-+#define PCIE_INTRBCTRL_VGA_ENABLE 0x00080000 /* VGA enable */
-+#define PCIE_INTRBCTRL_VGA_16BIT_DECODE 0x00100000 /* VGA 16bit decode */
-+#define PCIE_INTRBCTRL_RST_SECONDARY_BUS 0x00400000 /* Secondary bus rest, hot rest, 1ms */
-+/* Others are read only */
-+enum {
-+ PCIE_INTRBCTRL_INT_NON = 0,
-+ PCIE_INTRBCTRL_INTA,
-+ PCIE_INTRBCTRL_INTB,
-+ PCIE_INTRBCTRL_INTC,
-+ PCIE_INTRBCTRL_INTD,
-+};
-+
-+#define PCIE_PM_CAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x40)
-+
-+/* Power Management Control and Status Register */
-+#define PCIE_PM_CSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x44)
-+
-+#define PCIE_PM_CSR_POWER_STATE 0x00000003 /* Power State */
-+#define PCIE_PM_CSR_POWER_STATE_S 0
-+#define PCIE_PM_CSR_SW_RST 0x00000008 /* Soft Reset Enabled */
-+#define PCIE_PM_CSR_PME_ENABLE 0x00000100 /* PME Enable */
-+#define PCIE_PM_CSR_PME_STATUS 0x00008000 /* PME status */
-+
-+/* MSI Capability Register for EP */
-+#define PCIE_MCAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x50)
-+
-+#define PCIE_MCAPR_MSI_CAP_ID 0x000000FF /* MSI Capability ID */
-+#define PCIE_MCAPR_MSI_CAP_ID_S 0
-+#define PCIE_MCAPR_MSI_NEXT_CAP_PTR 0x0000FF00 /* Next Capability Pointer */
-+#define PCIE_MCAPR_MSI_NEXT_CAP_PTR_S 8
-+#define PCIE_MCAPR_MSI_ENABLE 0x00010000 /* MSI Enable */
-+#define PCIE_MCAPR_MULTI_MSG_CAP 0x000E0000 /* Multiple Message Capable */
-+#define PCIE_MCAPR_MULTI_MSG_CAP_S 17
-+#define PCIE_MCAPR_MULTI_MSG_ENABLE 0x00700000 /* Multiple Message Enable */
-+#define PCIE_MCAPR_MULTI_MSG_ENABLE_S 20
-+#define PCIE_MCAPR_ADDR64_CAP 0X00800000 /* 64-bit Address Capable */
-+
-+/* MSI Message Address Register */
-+#define PCIE_MA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x54)
-+
-+#define PCIE_MA_ADDR_MASK 0xFFFFFFFC /* Message Address */
-+
-+/* MSI Message Upper Address Register */
-+#define PCIE_MUA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x58)
-+
-+/* MSI Message Data Register */
-+#define PCIE_MD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x5C)
-+
-+#define PCIE_MD_DATA 0x0000FFFF /* Message Data */
-+#define PCIE_MD_DATA_S 0
-+
-+/* PCI Express Capability Register */
-+#define PCIE_XCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70)
-+
-+#define PCIE_XCAP_ID 0x000000FF /* PCI Express Capability ID */
-+#define PCIE_XCAP_ID_S 0
-+#define PCIE_XCAP_NEXT_CAP 0x0000FF00 /* Next Capability Pointer */
-+#define PCIE_XCAP_NEXT_CAP_S 8
-+#define PCIE_XCAP_VER 0x000F0000 /* PCI Express Capability Version */
-+#define PCIE_XCAP_VER_S 16
-+#define PCIE_XCAP_DEV_PORT_TYPE 0x00F00000 /* Device Port Type */
-+#define PCIE_XCAP_DEV_PORT_TYPE_S 20
-+#define PCIE_XCAP_SLOT_IMPLEMENTED 0x01000000 /* Slot Implemented */
-+#define PCIE_XCAP_MSG_INT_NUM 0x3E000000 /* Interrupt Message Number */
-+#define PCIE_XCAP_MSG_INT_NUM_S 25
-+
-+/* Device Capability Register */
-+#define PCIE_DCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74)
-+
-+#define PCIE_DCAP_MAX_PAYLOAD_SIZE 0x00000007 /* Max Payload size */
-+#define PCIE_DCAP_MAX_PAYLOAD_SIZE_S 0
-+#define PCIE_DCAP_PHANTOM_FUNC 0x00000018 /* Phanton Function, not supported */
-+#define PCIE_DCAP_PHANTOM_FUNC_S 3
-+#define PCIE_DCAP_EXT_TAG 0x00000020 /* Extended Tag Field */
-+#define PCIE_DCAP_EP_L0S_LATENCY 0x000001C0 /* EP L0s latency only */
-+#define PCIE_DCAP_EP_L0S_LATENCY_S 6
-+#define PCIE_DCAP_EP_L1_LATENCY 0x00000E00 /* EP L1 latency only */
-+#define PCIE_DCAP_EP_L1_LATENCY_S 9
-+#define PCIE_DCAP_ROLE_BASE_ERR_REPORT 0x00008000 /* Role Based ERR */
-+
-+/* Maximum payload size supported */
-+enum {
-+ PCIE_MAX_PAYLOAD_128 = 0,
-+ PCIE_MAX_PAYLOAD_256,
-+ PCIE_MAX_PAYLOAD_512,
-+ PCIE_MAX_PAYLOAD_1024,
-+ PCIE_MAX_PAYLOAD_2048,
-+ PCIE_MAX_PAYLOAD_4096,
-+};
-+
-+/* Device Control and Status Register */
-+#define PCIE_DCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x78)
-+
-+#define PCIE_DCTLSTS_CORRECTABLE_ERR_EN 0x00000001 /* COR-ERR */
-+#define PCIE_DCTLSTS_NONFATAL_ERR_EN 0x00000002 /* Non-fatal ERR */
-+#define PCIE_DCTLSTS_FATAL_ERR_EN 0x00000004 /* Fatal ERR */
-+#define PCIE_DCTLSYS_UR_REQ_EN 0x00000008 /* UR ERR */
-+#define PCIE_DCTLSTS_RELAXED_ORDERING_EN 0x00000010 /* Enable relaxing ordering */
-+#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE 0x000000E0 /* Max payload mask */
-+#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE_S 5
-+#define PCIE_DCTLSTS_EXT_TAG_EN 0x00000100 /* Extended tag field */
-+#define PCIE_DCTLSTS_PHANTOM_FUNC_EN 0x00000200 /* Phantom Function Enable */
-+#define PCIE_DCTLSTS_AUX_PM_EN 0x00000400 /* AUX Power PM Enable */
-+#define PCIE_DCTLSTS_NO_SNOOP_EN 0x00000800 /* Enable no snoop, except root port*/
-+#define PCIE_DCTLSTS_MAX_READ_SIZE 0x00007000 /* Max Read Request size*/
-+#define PCIE_DCTLSTS_MAX_READ_SIZE_S 12
-+#define PCIE_DCTLSTS_CORRECTABLE_ERR 0x00010000 /* COR-ERR Detected */
-+#define PCIE_DCTLSTS_NONFATAL_ERR 0x00020000 /* Non-Fatal ERR Detected */
-+#define PCIE_DCTLSTS_FATAL_ER 0x00040000 /* Fatal ERR Detected */
-+#define PCIE_DCTLSTS_UNSUPPORTED_REQ 0x00080000 /* UR Detected */
-+#define PCIE_DCTLSTS_AUX_POWER 0x00100000 /* Aux Power Detected */
-+#define PCIE_DCTLSTS_TRANSACT_PENDING 0x00200000 /* Transaction pending */
-+
-+#define PCIE_DCTLSTS_ERR_EN (PCIE_DCTLSTS_CORRECTABLE_ERR_EN | \
-+ PCIE_DCTLSTS_NONFATAL_ERR_EN | PCIE_DCTLSTS_FATAL_ERR_EN | \
-+ PCIE_DCTLSYS_UR_REQ_EN)
-+
-+/* Link Capability Register */
-+#define PCIE_LCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7C)
-+#define PCIE_LCAP_MAX_LINK_SPEED 0x0000000F /* Max link speed, 0x1 by default */
-+#define PCIE_LCAP_MAX_LINK_SPEED_S 0
-+#define PCIE_LCAP_MAX_LENGTH_WIDTH 0x000003F0 /* Maxium Length Width */
-+#define PCIE_LCAP_MAX_LENGTH_WIDTH_S 4
-+#define PCIE_LCAP_ASPM_LEVEL 0x00000C00 /* Active State Link PM Support */
-+#define PCIE_LCAP_ASPM_LEVEL_S 10
-+#define PCIE_LCAP_L0S_EIXT_LATENCY 0x00007000 /* L0s Exit Latency */
-+#define PCIE_LCAP_L0S_EIXT_LATENCY_S 12
-+#define PCIE_LCAP_L1_EXIT_LATENCY 0x00038000 /* L1 Exit Latency */
-+#define PCIE_LCAP_L1_EXIT_LATENCY_S 15
-+#define PCIE_LCAP_CLK_PM 0x00040000 /* Clock Power Management */
-+#define PCIE_LCAP_SDER 0x00080000 /* Surprise Down Error Reporting */
-+#define PCIE_LCAP_DLL_ACTIVE_REPROT 0x00100000 /* Data Link Layer Active Reporting Capable */
-+#define PCIE_LCAP_PORT_NUM 0xFF0000000 /* Port number */
-+#define PCIE_LCAP_PORT_NUM_S 24
-+
-+/* Maximum Length width definition */
-+#define PCIE_MAX_LENGTH_WIDTH_RES 0x00
-+#define PCIE_MAX_LENGTH_WIDTH_X1 0x01 /* Default */
-+#define PCIE_MAX_LENGTH_WIDTH_X2 0x02
-+#define PCIE_MAX_LENGTH_WIDTH_X4 0x04
-+#define PCIE_MAX_LENGTH_WIDTH_X8 0x08
-+#define PCIE_MAX_LENGTH_WIDTH_X12 0x0C
-+#define PCIE_MAX_LENGTH_WIDTH_X16 0x10
-+#define PCIE_MAX_LENGTH_WIDTH_X32 0x20
-+
-+/* Active State Link PM definition */
-+enum {
-+ PCIE_ASPM_RES0 = 0,
-+ PCIE_ASPM_L0S_ENTRY_SUPPORT, /* L0s */
-+ PCIE_ASPM_RES1,
-+ PCIE_ASPM_L0S_L1_ENTRY_SUPPORT, /* L0s and L1, default */
-+};
-+
-+/* L0s Exit Latency definition */
-+enum {
-+ PCIE_L0S_EIXT_LATENCY_L64NS = 0, /* < 64 ns */
-+ PCIE_L0S_EIXT_LATENCY_B64A128, /* > 64 ns < 128 ns */
-+ PCIE_L0S_EIXT_LATENCY_B128A256, /* > 128 ns < 256 ns */
-+ PCIE_L0S_EIXT_LATENCY_B256A512, /* > 256 ns < 512 ns */
-+ PCIE_L0S_EIXT_LATENCY_B512TO1U, /* > 512 ns < 1 us */
-+ PCIE_L0S_EIXT_LATENCY_B1A2U, /* > 1 us < 2 us */
-+ PCIE_L0S_EIXT_LATENCY_B2A4U, /* > 2 us < 4 us */
-+ PCIE_L0S_EIXT_LATENCY_M4US, /* > 4 us */
-+};
-+
-+/* L1 Exit Latency definition */
-+enum {
-+ PCIE_L1_EXIT_LATENCY_L1US = 0, /* < 1 us */
-+ PCIE_L1_EXIT_LATENCY_B1A2, /* > 1 us < 2 us */
-+ PCIE_L1_EXIT_LATENCY_B2A4, /* > 2 us < 4 us */
-+ PCIE_L1_EXIT_LATENCY_B4A8, /* > 4 us < 8 us */
-+ PCIE_L1_EXIT_LATENCY_B8A16, /* > 8 us < 16 us */
-+ PCIE_L1_EXIT_LATENCY_B16A32, /* > 16 us < 32 us */
-+ PCIE_L1_EXIT_LATENCY_B32A64, /* > 32 us < 64 us */
-+ PCIE_L1_EXIT_LATENCY_M64US, /* > 64 us */
-+};
-+
-+/* Link Control and Status Register */
-+#define PCIE_LCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x80)
-+#define PCIE_LCTLSTS_ASPM_ENABLE 0x00000003 /* Active State Link PM Control */
-+#define PCIE_LCTLSTS_ASPM_ENABLE_S 0
-+#define PCIE_LCTLSTS_RCB128 0x00000008 /* Read Completion Boundary 128*/
-+#define PCIE_LCTLSTS_LINK_DISABLE 0x00000010 /* Link Disable */
-+#define PCIE_LCTLSTS_RETRIAN_LINK 0x00000020 /* Retrain Link */
-+#define PCIE_LCTLSTS_COM_CLK_CFG 0x00000040 /* Common Clock Configuration */
-+#define PCIE_LCTLSTS_EXT_SYNC 0x00000080 /* Extended Synch */
-+#define PCIE_LCTLSTS_CLK_PM_EN 0x00000100 /* Enable Clock Powerm Management */
-+#define PCIE_LCTLSTS_LINK_SPEED 0x000F0000 /* Link Speed */
-+#define PCIE_LCTLSTS_LINK_SPEED_S 16
-+#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH 0x03F00000 /* Negotiated Link Width */
-+#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH_S 20
-+#define PCIE_LCTLSTS_RETRAIN_PENDING 0x08000000 /* Link training is ongoing */
-+#define PCIE_LCTLSTS_SLOT_CLK_CFG 0x10000000 /* Slot Clock Configuration */
-+#define PCIE_LCTLSTS_DLL_ACTIVE 0x20000000 /* Data Link Layer Active */
-+
-+/* Slot Capabilities Register */
-+#define PCIE_SLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x84)
-+
-+/* Slot Capabilities */
-+#define PCIE_SLCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x88)
-+
-+/* Root Control and Capability Register */
-+#define PCIE_RCTLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x8C)
-+#define PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR 0x00000001 /* #SERR on COR-ERR */
-+#define PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR 0x00000002 /* #SERR on Non-Fatal ERR */
-+#define PCIE_RCTLCAP_SERR_ON_FATAL_ERR 0x00000004 /* #SERR on Fatal ERR */
-+#define PCIE_RCTLCAP_PME_INT_EN 0x00000008 /* PME Interrupt Enable */
-+#define PCIE_RCTLCAP_SERR_ENABLE (PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR | \
-+ PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR | PCIE_RCTLCAP_SERR_ON_FATAL_ERR)
-+/* Root Status Register */
-+#define PCIE_RSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x90)
-+#define PCIE_RSTS_PME_REQ_ID 0x0000FFFF /* PME Request ID */
-+#define PCIE_RSTS_PME_REQ_ID_S 0
-+#define PCIE_RSTS_PME_STATUS 0x00010000 /* PME Status */
-+#define PCIE_RSTS_PME_PENDING 0x00020000 /* PME Pending */
-+
-+/* PCI Express Enhanced Capability Header */
-+#define PCIE_ENHANCED_CAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x100)
-+#define PCIE_ENHANCED_CAP_ID 0x0000FFFF /* PCI Express Extended Capability ID */
-+#define PCIE_ENHANCED_CAP_ID_S 0
-+#define PCIE_ENHANCED_CAP_VER 0x000F0000 /* Capability Version */
-+#define PCIE_ENHANCED_CAP_VER_S 16
-+#define PCIE_ENHANCED_CAP_NEXT_OFFSET 0xFFF00000 /* Next Capability Offset */
-+#define PCIE_ENHANCED_CAP_NEXT_OFFSET_S 20
-+
-+/* Uncorrectable Error Status Register */
-+#define PCIE_UES_R(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x104)
-+#define PCIE_DATA_LINK_PROTOCOL_ERR 0x00000010 /* Data Link Protocol Error Status */
-+#define PCIE_SURPRISE_DOWN_ERROR 0x00000020 /* Surprise Down Error Status */
-+#define PCIE_POISONED_TLP 0x00001000 /* Poisoned TLP Status */
-+#define PCIE_FC_PROTOCOL_ERR 0x00002000 /* Flow Control Protocol Error Status */
-+#define PCIE_COMPLETION_TIMEOUT 0x00004000 /* Completion Timeout Status */
-+#define PCIE_COMPLETOR_ABORT 0x00008000 /* Completer Abort Error */
-+#define PCIE_UNEXPECTED_COMPLETION 0x00010000 /* Unexpected Completion Status */
-+#define PCIE_RECEIVER_OVERFLOW 0x00020000 /* Receive Overflow Status */
-+#define PCIE_MALFORNED_TLP 0x00040000 /* Malformed TLP Stauts */
-+#define PCIE_ECRC_ERR 0x00080000 /* ECRC Error Stauts */
-+#define PCIE_UR_REQ 0x00100000 /* Unsupported Request Error Status */
-+#define PCIE_ALL_UNCORRECTABLE_ERR (PCIE_DATA_LINK_PROTOCOL_ERR | PCIE_SURPRISE_DOWN_ERROR | \
-+ PCIE_POISONED_TLP | PCIE_FC_PROTOCOL_ERR | PCIE_COMPLETION_TIMEOUT | \
-+ PCIE_COMPLETOR_ABORT | PCIE_UNEXPECTED_COMPLETION | PCIE_RECEIVER_OVERFLOW |\
-+ PCIE_MALFORNED_TLP | PCIE_ECRC_ERR | PCIE_UR_REQ)
-+
-+/* Uncorrectable Error Mask Register, Mask means no report */
-+#define PCIE_UEMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x108)
-+
-+/* Uncorrectable Error Severity Register */
-+#define PCIE_UESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10C)
-+
-+/* Correctable Error Status Register */
-+#define PCIE_CESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x110)
-+#define PCIE_RX_ERR 0x00000001 /* Receive Error Status */
-+#define PCIE_BAD_TLP 0x00000040 /* Bad TLP Status */
-+#define PCIE_BAD_DLLP 0x00000080 /* Bad DLLP Status */
-+#define PCIE_REPLAY_NUM_ROLLOVER 0x00000100 /* Replay Number Rollover Status */
-+#define PCIE_REPLAY_TIMER_TIMEOUT_ERR 0x00001000 /* Reply Timer Timeout Status */
-+#define PCIE_ADVISORY_NONFTAL_ERR 0x00002000 /* Advisory Non-Fatal Error Status */
-+#define PCIE_CORRECTABLE_ERR (PCIE_RX_ERR | PCIE_BAD_TLP | PCIE_BAD_DLLP | PCIE_REPLAY_NUM_ROLLOVER |\
-+ PCIE_REPLAY_TIMER_TIMEOUT_ERR | PCIE_ADVISORY_NONFTAL_ERR)
-+
-+/* Correctable Error Mask Register */
-+#define PCIE_CEMR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x114)
-+
-+/* Advanced Error Capabilities and Control Register */
-+#define PCIE_AECCR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x118)
-+#define PCIE_AECCR_FIRST_ERR_PTR 0x0000001F /* First Error Pointer */
-+#define PCIE_AECCR_FIRST_ERR_PTR_S 0
-+#define PCIE_AECCR_ECRC_GEN_CAP 0x00000020 /* ECRC Generation Capable */
-+#define PCIE_AECCR_ECRC_GEN_EN 0x00000040 /* ECRC Generation Enable */
-+#define PCIE_AECCR_ECRC_CHECK_CAP 0x00000080 /* ECRC Check Capable */
-+#define PCIE_AECCR_ECRC_CHECK_EN 0x00000100 /* ECRC Check Enable */
-+
-+/* Header Log Register 1 */
-+#define PCIE_HLR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x11C)
-+
-+/* Header Log Register 2 */
-+#define PCIE_HLR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x120)
-+
-+/* Header Log Register 3 */
-+#define PCIE_HLR3(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x124)
-+
-+/* Header Log Register 4 */
-+#define PCIE_HLR4(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x128)
-+
-+/* Root Error Command Register */
-+#define PCIE_RECR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x12C)
-+#define PCIE_RECR_CORRECTABLE_ERR_REPORT_EN 0x00000001 /* COR-ERR */
-+#define PCIE_RECR_NONFATAL_ERR_REPORT_EN 0x00000002 /* Non-Fatal ERR */
-+#define PCIE_RECR_FATAL_ERR_REPORT_EN 0x00000004 /* Fatal ERR */
-+#define PCIE_RECR_ERR_REPORT_EN (PCIE_RECR_CORRECTABLE_ERR_REPORT_EN | \
-+ PCIE_RECR_NONFATAL_ERR_REPORT_EN | PCIE_RECR_FATAL_ERR_REPORT_EN)
-+
-+/* Root Error Status Register */
-+#define PCIE_RESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x130)
-+#define PCIE_RESR_CORRECTABLE_ERR 0x00000001 /* COR-ERR Receveid */
-+#define PCIE_RESR_MULTI_CORRECTABLE_ERR 0x00000002 /* Multiple COR-ERR Received */
-+#define PCIE_RESR_FATAL_NOFATAL_ERR 0x00000004 /* ERR Fatal/Non-Fatal Received */
-+#define PCIE_RESR_MULTI_FATAL_NOFATAL_ERR 0x00000008 /* Multiple ERR Fatal/Non-Fatal Received */
-+#define PCIE_RESR_FIRST_UNCORRECTABLE_FATAL_ERR 0x00000010 /* First UN-COR Fatal */
-+#define PCIR_RESR_NON_FATAL_ERR 0x00000020 /* Non-Fatal Error Message Received */
-+#define PCIE_RESR_FATAL_ERR 0x00000040 /* Fatal Message Received */
-+#define PCIE_RESR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */
-+#define PCIE_RESR_AER_INT_MSG_NUM_S 27
-+
-+/* Error Source Indentification Register */
-+#define PCIE_ESIR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x134)
-+#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID 0x0000FFFF
-+#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID_S 0
-+#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID 0xFFFF0000
-+#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID_S 16
-+
-+/* VC Enhanced Capability Header */
-+#define PCIE_VC_ECH(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x140)
-+
-+/* Port VC Capability Register */
-+#define PCIE_PVC1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x144)
-+#define PCIE_PVC1_EXT_VC_CNT 0x00000007 /* Extended VC Count */
-+#define PCIE_PVC1_EXT_VC_CNT_S 0
-+#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT 0x00000070 /* Low Priority Extended VC Count */
-+#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT_S 4
-+#define PCIE_PVC1_REF_CLK 0x00000300 /* Reference Clock */
-+#define PCIE_PVC1_REF_CLK_S 8
-+#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE 0x00000C00 /* Port Arbitration Table Entry Size */
-+#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE_S 10
-+
-+/* Extended Virtual Channel Count Defintion */
-+#define PCIE_EXT_VC_CNT_MIN 0
-+#define PCIE_EXT_VC_CNT_MAX 7
-+
-+/* Port Arbitration Table Entry Size Definition */
-+enum {
-+ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S1BIT = 0,
-+ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S2BIT,
-+ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S4BIT,
-+ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S8BIT,
-+};
-+
-+/* Port VC Capability Register 2 */
-+#define PCIE_PVC2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x148)
-+#define PCIE_PVC2_VC_ARB_16P_FIXED_WRR 0x00000001 /* HW Fixed arbitration, 16 phase WRR */
-+#define PCIE_PVC2_VC_ARB_32P_WRR 0x00000002 /* 32 phase WRR */
-+#define PCIE_PVC2_VC_ARB_64P_WRR 0x00000004 /* 64 phase WRR */
-+#define PCIE_PVC2_VC_ARB_128P_WRR 0x00000008 /* 128 phase WRR */
-+#define PCIE_PVC2_VC_ARB_WRR 0x0000000F
-+#define PCIE_PVC2_VC_ARB_TAB_OFFSET 0xFF000000 /* VC arbitration table offset, not support */
-+#define PCIE_PVC2_VC_ARB_TAB_OFFSET_S 24
-+
-+/* Port VC Control and Status Register */
-+#define PCIE_PVCCRSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14C)
-+#define PCIE_PVCCRSR_LOAD_VC_ARB_TAB 0x00000001 /* Load VC Arbitration Table */
-+#define PCIE_PVCCRSR_VC_ARB_SEL 0x0000000E /* VC Arbitration Select */
-+#define PCIE_PVCCRSR_VC_ARB_SEL_S 1
-+#define PCIE_PVCCRSR_VC_ARB_TAB_STATUS 0x00010000 /* Arbitration Status */
-+
-+/* VC0 Resource Capability Register */
-+#define PCIE_VC0_RC(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x150)
-+#define PCIE_VC0_RC_PORT_ARB_HW_FIXED 0x00000001 /* HW Fixed arbitration */
-+#define PCIE_VC0_RC_PORT_ARB_32P_WRR 0x00000002 /* 32 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_64P_WRR 0x00000004 /* 64 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_128P_WRR 0x00000008 /* 128 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_TM_128P_WRR 0x00000010 /* Time-based 128 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB_TM_256P_WRR 0x00000020 /* Time-based 256 phase WRR */
-+#define PCIE_VC0_RC_PORT_ARB (PCIE_VC0_RC_PORT_ARB_HW_FIXED | PCIE_VC0_RC_PORT_ARB_32P_WRR |\
-+ PCIE_VC0_RC_PORT_ARB_64P_WRR | PCIE_VC0_RC_PORT_ARB_128P_WRR | \
-+ PCIE_VC0_RC_PORT_ARB_TM_128P_WRR | PCIE_VC0_RC_PORT_ARB_TM_256P_WRR)
-+
-+#define PCIE_VC0_RC_REJECT_SNOOP 0x00008000 /* Reject Snoop Transactioin */
-+#define PCIE_VC0_RC_MAX_TIMESLOTS 0x007F0000 /* Maximum time Slots */
-+#define PCIE_VC0_RC_MAX_TIMESLOTS_S 16
-+#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET 0xFF000000 /* Port Arbitration Table Offset */
-+#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET_S 24
-+
-+/* VC0 Resource Control Register */
-+#define PCIE_VC0_RC0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x154)
-+#define PCIE_VC0_RC0_TVM0 0x00000001 /* TC0 and VC0 */
-+#define PCIE_VC0_RC0_TVM1 0x00000002 /* TC1 and VC1 */
-+#define PCIE_VC0_RC0_TVM2 0x00000004 /* TC2 and VC2 */
-+#define PCIE_VC0_RC0_TVM3 0x00000008 /* TC3 and VC3 */
-+#define PCIE_VC0_RC0_TVM4 0x00000010 /* TC4 and VC4 */
-+#define PCIE_VC0_RC0_TVM5 0x00000020 /* TC5 and VC5 */
-+#define PCIE_VC0_RC0_TVM6 0x00000040 /* TC6 and VC6 */
-+#define PCIE_VC0_RC0_TVM7 0x00000080 /* TC7 and VC7 */
-+#define PCIE_VC0_RC0_TC_VC 0x000000FF /* TC/VC mask */
-+
-+#define PCIE_VC0_RC0_LOAD_PORT_ARB_TAB 0x00010000 /* Load Port Arbitration Table */
-+#define PCIE_VC0_RC0_PORT_ARB_SEL 0x000E0000 /* Port Arbitration Select */
-+#define PCIE_VC0_RC0_PORT_ARB_SEL_S 17
-+#define PCIE_VC0_RC0_VC_ID 0x07000000 /* VC ID */
-+#define PCIE_VC0_RC0_VC_ID_S 24
-+#define PCIE_VC0_RC0_VC_EN 0x80000000 /* VC Enable */
-+
-+/* VC0 Resource Status Register */
-+#define PCIE_VC0_RSR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x158)
-+#define PCIE_VC0_RSR0_PORT_ARB_TAB_STATUS 0x00010000 /* Port Arbitration Table Status,not used */
-+#define PCIE_VC0_RSR0_VC_NEG_PENDING 0x00020000 /* VC Negotiation Pending */
-+
-+/* Ack Latency Timer and Replay Timer Register */
-+#define PCIE_ALTRT(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x700)
-+#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT 0x0000FFFF /* Round Trip Latency Time Limit */
-+#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT_S 0
-+#define PCIE_ALTRT_REPLAY_TIME_LIMIT 0xFFFF0000 /* Replay Time Limit */
-+#define PCIE_ALTRT_REPLAY_TIME_LIMIT_S 16
-+
-+/* Other Message Register */
-+#define PCIE_OMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x704)
-+
-+/* Port Force Link Register */
-+#define PCIE_PFLR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x708)
-+#define PCIE_PFLR_LINK_NUM 0x000000FF /* Link Number */
-+#define PCIE_PFLR_LINK_NUM_S 0
-+#define PCIE_PFLR_FORCE_LINK 0x00008000 /* Force link */
-+#define PCIE_PFLR_LINK_STATE 0x003F0000 /* Link State */
-+#define PCIE_PFLR_LINK_STATE_S 16
-+#define PCIE_PFLR_LOW_POWER_ENTRY_CNT 0xFF000000 /* Low Power Entrance Count, only for EP */
-+#define PCIE_PFLR_LOW_POWER_ENTRY_CNT_S 24
-+
-+/* Ack Frequency Register */
-+#define PCIE_AFR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70C)
-+#define PCIE_AFR_AF 0x000000FF /* Ack Frequency */
-+#define PCIE_AFR_AF_S 0
-+#define PCIE_AFR_FTS_NUM 0x0000FF00 /* The number of Fast Training Sequence from L0S to L0 */
-+#define PCIE_AFR_FTS_NUM_S 8
-+#define PCIE_AFR_COM_FTS_NUM 0x00FF0000 /* N_FTS; when common clock is used*/
-+#define PCIE_AFR_COM_FTS_NUM_S 16
-+#define PCIE_AFR_L0S_ENTRY_LATENCY 0x07000000 /* L0s Entrance Latency */
-+#define PCIE_AFR_L0S_ENTRY_LATENCY_S 24
-+#define PCIE_AFR_L1_ENTRY_LATENCY 0x38000000 /* L1 Entrance Latency */
-+#define PCIE_AFR_L1_ENTRY_LATENCY_S 27
-+#define PCIE_AFR_FTS_NUM_DEFAULT 32
-+#define PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT 7
-+#define PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT 5
-+
-+/* Port Link Control Register */
-+#define PCIE_PLCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x710)
-+#define PCIE_PLCR_OTHER_MSG_REQ 0x00000001 /* Other Message Request */
-+#define PCIE_PLCR_SCRAMBLE_DISABLE 0x00000002 /* Scramble Disable */
-+#define PCIE_PLCR_LOOPBACK_EN 0x00000004 /* Loopback Enable */
-+#define PCIE_PLCR_LTSSM_HOT_RST 0x00000008 /* Force LTSSM to the hot reset */
-+#define PCIE_PLCR_DLL_LINK_EN 0x00000020 /* Enable Link initialization */
-+#define PCIE_PLCR_FAST_LINK_SIM_EN 0x00000080 /* Sets all internal timers to fast mode for simulation purposes */
-+#define PCIE_PLCR_LINK_MODE 0x003F0000 /* Link Mode Enable Mask */
-+#define PCIE_PLCR_LINK_MODE_S 16
-+#define PCIE_PLCR_CORRUPTED_CRC_EN 0x02000000 /* Enabled Corrupt CRC */
-+
-+/* Lane Skew Register */
-+#define PCIE_LSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x714)
-+#define PCIE_LSR_LANE_SKEW_NUM 0x00FFFFFF /* Insert Lane Skew for Transmit, not applicable */
-+#define PCIE_LSR_LANE_SKEW_NUM_S 0
-+#define PCIE_LSR_FC_DISABLE 0x01000000 /* Disable of Flow Control */
-+#define PCIE_LSR_ACKNAK_DISABLE 0x02000000 /* Disable of Ack/Nak */
-+#define PCIE_LSR_LANE_DESKEW_DISABLE 0x80000000 /* Disable of Lane-to-Lane Skew */
-+
-+/* Symbol Number Register */
-+#define PCIE_SNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x718)
-+#define PCIE_SNR_TS 0x0000000F /* Number of TS Symbol */
-+#define PCIE_SNR_TS_S 0
-+#define PCIE_SNR_SKP 0x00000700 /* Number of SKP Symbol */
-+#define PCIE_SNR_SKP_S 8
-+#define PCIE_SNR_REPLAY_TIMER 0x0007C000 /* Timer Modifier for Replay Timer */
-+#define PCIE_SNR_REPLAY_TIMER_S 14
-+#define PCIE_SNR_ACKNAK_LATENCY_TIMER 0x00F80000 /* Timer Modifier for Ack/Nak Latency Timer */
-+#define PCIE_SNR_ACKNAK_LATENCY_TIMER_S 19
-+#define PCIE_SNR_FC_TIMER 0x1F000000 /* Timer Modifier for Flow Control Watchdog Timer */
-+#define PCIE_SNR_FC_TIMER_S 28
-+
-+/* Symbol Timer Register and Filter Mask Register 1 */
-+#define PCIE_STRFMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x71C)
-+#define PCIE_STRFMR_SKP_INTERVAL 0x000007FF /* SKP lnterval Value */
-+#define PCIE_STRFMR_SKP_INTERVAL_S 0
-+#define PCIE_STRFMR_FC_WDT_DISABLE 0x00008000 /* Disable of FC Watchdog Timer */
-+#define PCIE_STRFMR_TLP_FUNC_MISMATCH_OK 0x00010000 /* Mask Function Mismatch Filtering for Incoming Requests */
-+#define PCIE_STRFMR_POISONED_TLP_OK 0x00020000 /* Mask Poisoned TLP Filtering */
-+#define PCIE_STRFMR_BAR_MATCH_OK 0x00040000 /* Mask BAR Match Filtering */
-+#define PCIE_STRFMR_TYPE1_CFG_REQ_OK 0x00080000 /* Mask Type 1 Configuration Request Filtering */
-+#define PCIE_STRFMR_LOCKED_REQ_OK 0x00100000 /* Mask Locked Request Filtering */
-+#define PCIE_STRFMR_CPL_TAG_ERR_RULES_OK 0x00200000 /* Mask Tag Error Rules for Received Completions */
-+#define PCIE_STRFMR_CPL_REQUESTOR_ID_MISMATCH_OK 0x00400000 /* Mask Requester ID Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_FUNC_MISMATCH_OK 0x00800000 /* Mask Function Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_TC_MISMATCH_OK 0x01000000 /* Mask Traffic Class Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_ATTR_MISMATCH_OK 0x02000000 /* Mask Attribute Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_CPL_LENGTH_MISMATCH_OK 0x04000000 /* Mask Length Mismatch Error for Received Completions */
-+#define PCIE_STRFMR_TLP_ECRC_ERR_OK 0x08000000 /* Mask ECRC Error Filtering */
-+#define PCIE_STRFMR_CPL_TLP_ECRC_OK 0x10000000 /* Mask ECRC Error Filtering for Completions */
-+#define PCIE_STRFMR_RX_TLP_MSG_NO_DROP 0x20000000 /* Send Message TLPs */
-+#define PCIE_STRFMR_RX_IO_TRANS_ENABLE 0x40000000 /* Mask Filtering of received I/O Requests */
-+#define PCIE_STRFMR_RX_CFG_TRANS_ENABLE 0x80000000 /* Mask Filtering of Received Configuration Requests */
-+
-+#define PCIE_DEF_SKP_INTERVAL 700 /* 1180 ~1538 , 125MHz * 2, 250MHz * 1 */
-+
-+/* Filter Masker Register 2 */
-+#define PCIE_FMR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x720)
-+#define PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1 0x00000001 /* Mask RADM Filtering and Error Handling Rules */
-+#define PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 0x00000002 /* Mask RADM Filtering and Error Handling Rules */
-+
-+/* Debug Register 0 */
-+#define PCIE_DBR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x728)
-+
-+/* Debug Register 1 */
-+#define PCIE_DBR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x72C)
-+
-+/* Transmit Posted FC Credit Status Register */
-+#define PCIE_TPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x730)
-+#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS 0x00000FFF /* Transmit Posted Data FC Credits */
-+#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS_S 0
-+#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS 0x000FF000 /* Transmit Posted Header FC Credits */
-+#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS_S 12
-+
-+/* Transmit Non-Posted FC Credit Status */
-+#define PCIE_TNPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x734)
-+#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS 0x00000FFF /* Transmit Non-Posted Data FC Credits */
-+#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS_S 0
-+#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS 0x000FF000 /* Transmit Non-Posted Header FC Credits */
-+#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS_S 12
-+
-+/* Transmit Complete FC Credit Status Register */
-+#define PCIE_TCFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x738)
-+#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS 0x00000FFF /* Transmit Completion Data FC Credits */
-+#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS_S 0
-+#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS 0x000FF000 /* Transmit Completion Header FC Credits */
-+#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS_S 12
-+
-+/* Queue Status Register */
-+#define PCIE_QSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x73C)
-+#define PCIE_QSR_WAIT_UPDATE_FC_DLL 0x00000001 /* Received TLP FC Credits Not Returned */
-+#define PCIE_QSR_TX_RETRY_BUF_NOT_EMPTY 0x00000002 /* Transmit Retry Buffer Not Empty */
-+#define PCIE_QSR_RX_QUEUE_NOT_EMPTY 0x00000004 /* Received Queue Not Empty */
-+
-+/* VC Transmit Arbitration Register 1 */
-+#define PCIE_VCTAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x740)
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC0 0x000000FF /* WRR Weight for VC0 */
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC1 0x0000FF00 /* WRR Weight for VC1 */
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC2 0x00FF0000 /* WRR Weight for VC2 */
-+#define PCIE_VCTAR1_WRR_WEIGHT_VC3 0xFF000000 /* WRR Weight for VC3 */
-+
-+/* VC Transmit Arbitration Register 2 */
-+#define PCIE_VCTAR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x744)
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC4 0x000000FF /* WRR Weight for VC4 */
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC5 0x0000FF00 /* WRR Weight for VC5 */
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC6 0x00FF0000 /* WRR Weight for VC6 */
-+#define PCIE_VCTAR2_WRR_WEIGHT_VC7 0xFF000000 /* WRR Weight for VC7 */
-+
-+/* VC0 Posted Receive Queue Control Register */
-+#define PCIE_VC0_PRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x748)
-+#define PCIE_VC0_PRQCR_P_DATA_CREDITS 0x00000FFF /* VC0 Posted Data Credits */
-+#define PCIE_VC0_PRQCR_P_DATA_CREDITS_S 0
-+#define PCIE_VC0_PRQCR_P_HDR_CREDITS 0x000FF000 /* VC0 Posted Header Credits */
-+#define PCIE_VC0_PRQCR_P_HDR_CREDITS_S 12
-+#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE 0x00E00000 /* VC0 Posted TLP Queue Mode */
-+#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE_S 20
-+#define PCIE_VC0_PRQCR_TLP_RELAX_ORDER 0x40000000 /* TLP Type Ordering for VC0 */
-+#define PCIE_VC0_PRQCR_VC_STRICT_ORDER 0x80000000 /* VC0 Ordering for Receive Queues */
-+
-+/* VC0 Non-Posted Receive Queue Control */
-+#define PCIE_VC0_NPRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74C)
-+#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS 0x00000FFF /* VC0 Non-Posted Data Credits */
-+#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS_S 0
-+#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS 0x000FF000 /* VC0 Non-Posted Header Credits */
-+#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS_S 12
-+#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE 0x00E00000 /* VC0 Non-Posted TLP Queue Mode */
-+#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE_S 20
-+
-+/* VC0 Completion Receive Queue Control */
-+#define PCIE_VC0_CRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x750)
-+#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS 0x00000FFF /* VC0 Completion TLP Queue Mode */
-+#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS_S 0
-+#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS 0x000FF000 /* VC0 Completion Header Credits */
-+#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS_S 12
-+#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE 0x00E00000 /* VC0 Completion Data Credits */
-+#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE_S 21
-+
-+/* Applicable to the above three registers */
-+enum {
-+ PCIE_VC0_TLP_QUEUE_MODE_STORE_FORWARD = 1,
-+ PCIE_VC0_TLP_QUEUE_MODE_CUT_THROUGH = 2,
-+ PCIE_VC0_TLP_QUEUE_MODE_BYPASS = 4,
-+};
-+
-+/* VC0 Posted Buffer Depth Register */
-+#define PCIE_VC0_PBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7A8)
-+#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Posted Data Queue Depth */
-+#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES_S 0
-+#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Posted Header Queue Depth */
-+#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES_S 16
-+
-+/* VC0 Non-Posted Buffer Depth Register */
-+#define PCIE_VC0_NPBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7AC)
-+#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Non-Posted Data Queue Depth */
-+#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES_S 0
-+#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Non-Posted Header Queue Depth */
-+#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES_S 16
-+
-+/* VC0 Completion Buffer Depth Register */
-+#define PCIE_VC0_CBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7B0)
-+#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES 0x00003FFF /* C0 Completion Data Queue Depth */
-+#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES_S 0
-+#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Completion Header Queue Depth */
-+#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES_S 16
-+
-+/* PHY Status Register, all zeros in VR9 */
-+#define PCIE_PHYSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x810)
-+
-+/* PHY Control Register, all zeros in VR9 */
-+#define PCIE_PHYCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x814)
-+
-+/*
-+ * PCIe PDI PHY register definition, suppose all the following
-+ * stuff is confidential.
-+ * XXX, detailed bit definition
-+ */
-+#define PCIE_PHY_PLL_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x22 << 1))
-+#define PCIE_PHY_PLL_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x23 << 1))
-+#define PCIE_PHY_PLL_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x24 << 1))
-+#define PCIE_PHY_PLL_CTRL4(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x25 << 1))
-+#define PCIE_PHY_PLL_CTRL5(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x26 << 1))
-+#define PCIE_PHY_PLL_CTRL6(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x27 << 1))
-+#define PCIE_PHY_PLL_CTRL7(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x28 << 1))
-+#define PCIE_PHY_PLL_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x29 << 1))
-+#define PCIE_PHY_PLL_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2A << 1))
-+#define PCIE_PHY_PLL_A_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2B << 1))
-+#define PCIE_PHY_PLL_STATUS(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2C << 1))
-+
-+#define PCIE_PHY_TX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x30 << 1))
-+#define PCIE_PHY_TX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x31 << 1))
-+#define PCIE_PHY_TX1_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x32 << 1))
-+#define PCIE_PHY_TX1_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x33 << 1))
-+#define PCIE_PHY_TX1_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x34 << 1))
-+#define PCIE_PHY_TX1_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x35 << 1))
-+#define PCIE_PHY_TX1_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x36 << 1))
-+#define PCIE_PHY_TX1_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x37 << 1))
-+
-+#define PCIE_PHY_TX2_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x38 << 1))
-+#define PCIE_PHY_TX2_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x39 << 1))
-+#define PCIE_PHY_TX2_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3B << 1))
-+#define PCIE_PHY_TX2_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3C << 1))
-+#define PCIE_PHY_TX2_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3D << 1))
-+#define PCIE_PHY_TX2_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3E << 1))
-+#define PCIE_PHY_TX2_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3F << 1))
-+
-+#define PCIE_PHY_RX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x50 << 1))
-+#define PCIE_PHY_RX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x51 << 1))
-+#define PCIE_PHY_RX1_CDR(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x52 << 1))
-+#define PCIE_PHY_RX1_EI(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x53 << 1))
-+#define PCIE_PHY_RX1_A_CTRL(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x55 << 1))
-+
-+/* Interrupt related stuff */
-+#define PCIE_LEGACY_DISABLE 0
-+#define PCIE_LEGACY_INTA 1
-+#define PCIE_LEGACY_INTB 2
-+#define PCIE_LEGACY_INTC 3
-+#define PCIE_LEGACY_INTD 4
-+#define PCIE_LEGACY_INT_MAX PCIE_LEGACY_INTD
-+
-+#define PCIE_IRQ_LOCK(lock) do { \
-+ unsigned long flags; \
-+ spin_lock_irqsave(&(lock), flags);
-+#define PCIE_IRQ_UNLOCK(lock) \
-+ spin_unlock_irqrestore(&(lock), flags); \
-+} while (0)
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)
-+#define IRQF_SHARED SA_SHIRQ
-+#endif
-+
-+#define PCIE_MSG_MSI 0x00000001
-+#define PCIE_MSG_ISR 0x00000002
-+#define PCIE_MSG_FIXUP 0x00000004
-+#define PCIE_MSG_READ_CFG 0x00000008
-+#define PCIE_MSG_WRITE_CFG 0x00000010
-+#define PCIE_MSG_CFG (PCIE_MSG_READ_CFG | PCIE_MSG_WRITE_CFG)
-+#define PCIE_MSG_REG 0x00000020
-+#define PCIE_MSG_INIT 0x00000040
-+#define PCIE_MSG_ERR 0x00000080
-+#define PCIE_MSG_PHY 0x00000100
-+#define PCIE_MSG_ANY 0x000001ff
-+
-+#define IFX_PCIE_PORT0 0
-+#define IFX_PCIE_PORT1 1
-+
-+#ifdef CONFIG_IFX_PCIE_2ND_CORE
-+#define IFX_PCIE_CORE_NR 2
-+#else
-+#define IFX_PCIE_CORE_NR 1
-+#endif
-+
-+//#define IFX_PCIE_ERROR_INT
-+
-+//#define IFX_PCIE_DBG
-+
-+#if defined(IFX_PCIE_DBG)
-+#define IFX_PCIE_PRINT(_m, _fmt, args...) do { \
-+ if (g_pcie_debug_flag & (_m)) { \
-+ ifx_pcie_debug((_fmt), ##args); \
-+ } \
-+} while (0)
-+
-+#define INLINE
-+#else
-+#define IFX_PCIE_PRINT(_m, _fmt, args...) \
-+ do {} while(0)
-+#define INLINE inline
-+#endif
-+
-+struct ifx_pci_controller {
-+ struct pci_controller pcic;
-+
-+ /* RC specific, per host bus information */
-+ u32 port; /* Port index, 0 -- 1st core, 1 -- 2nd core */
-+};
-+
-+typedef struct ifx_pcie_ir_irq {
-+ const unsigned int irq;
-+ const char name[16];
-+}ifx_pcie_ir_irq_t;
-+
-+typedef struct ifx_pcie_legacy_irq{
-+ const u32 irq_bit;
-+ const int irq;
-+}ifx_pcie_legacy_irq_t;
-+
-+typedef struct ifx_pcie_irq {
-+ ifx_pcie_ir_irq_t ir_irq;
-+ ifx_pcie_legacy_irq_t legacy_irq[PCIE_LEGACY_INT_MAX];
-+}ifx_pcie_irq_t;
-+
-+extern u32 g_pcie_debug_flag;
-+extern void ifx_pcie_debug(const char *fmt, ...);
-+extern void pcie_phy_clock_mode_setup(int pcie_port);
-+extern void pcie_msi_pic_init(int pcie_port);
-+extern u32 ifx_pcie_bus_enum_read_hack(int where, u32 value);
-+extern u32 ifx_pcie_bus_enum_write_hack(int where, u32 value);
-+
-+
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+#include <linux/gpio.h>
-+#include <linux/clk.h>
-+
-+#include <lantiq_soc.h>
-+
-+#define IFX_PCIE_GPIO_RESET 38
-+#define IFX_REG_R32 ltq_r32
-+#define IFX_REG_W32 ltq_w32
-+#define CONFIG_IFX_PCIE_HW_SWAP
-+#define IFX_RCU_AHB_ENDIAN ((volatile u32*)(IFX_RCU + 0x004C))
-+#define IFX_RCU_RST_REQ ((volatile u32*)(IFX_RCU + 0x0010))
-+#define IFX_RCU_AHB_BE_PCIE_PDI 0x00000080 /* Configure PCIE PDI module in big endian*/
-+
-+#define IFX_RCU (KSEG1 | 0x1F203000)
-+#define IFX_RCU_AHB_BE_PCIE_M 0x00000001 /* Configure AHB master port that connects to PCIe RC in big endian */
-+#define IFX_RCU_AHB_BE_PCIE_S 0x00000010 /* Configure AHB slave port that connects to PCIe RC in little endian */
-+#define IFX_RCU_AHB_BE_XBAR_M 0x00000002 /* Configure AHB master port that connects to XBAR in big endian */
-+#define CONFIG_IFX_PCIE_PHY_36MHZ_MODE
-+
-+#define IFX_PMU1_MODULE_PCIE_PHY (0)
-+#define IFX_PMU1_MODULE_PCIE_CTRL (1)
-+#define IFX_PMU1_MODULE_PDI (4)
-+#define IFX_PMU1_MODULE_MSI (5)
-+
-+#define IFX_PMU_MODULE_PCIE_L0_CLK (31)
-+
-+
-+static inline void pcie_ep_gpio_rst_init(int pcie_port)
-+{
-+}
-+
-+static inline void pcie_ahb_pmu_setup(void)
-+{
-+ struct clk *clk;
-+ clk = clk_get_sys("ltq_pcie", "ahb");
-+ clk_enable(clk);
-+ //ltq_pmu_enable(PMU_AHBM | PMU_AHBS);
-+}
-+
-+static inline void pcie_rcu_endian_setup(int pcie_port)
-+{
-+ u32 reg;
-+
-+ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-+#ifdef CONFIG_IFX_PCIE_HW_SWAP
-+ reg |= IFX_RCU_AHB_BE_PCIE_M;
-+ reg |= IFX_RCU_AHB_BE_PCIE_S;
-+ reg &= ~IFX_RCU_AHB_BE_XBAR_M;
-+#else
-+ reg |= IFX_RCU_AHB_BE_PCIE_M;
-+ reg &= ~IFX_RCU_AHB_BE_PCIE_S;
-+ reg &= ~IFX_RCU_AHB_BE_XBAR_M;
-+#endif /* CONFIG_IFX_PCIE_HW_SWAP */
-+ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-+ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN));
-+}
-+
-+static inline void pcie_phy_pmu_enable(int pcie_port)
-+{
-+ struct clk *clk;
-+ clk = clk_get_sys("ltq_pcie", "phy");
-+ clk_enable(clk);
-+ //ltq_pmu1_enable(1<<IFX_PMU1_MODULE_PCIE_PHY);
-+}
-+
-+static inline void pcie_phy_pmu_disable(int pcie_port)
-+{
-+ struct clk *clk;
-+ clk = clk_get_sys("ltq_pcie", "phy");
-+ clk_disable(clk);
-+ //ltq_pmu1_disable(1<<IFX_PMU1_MODULE_PCIE_PHY);
-+}
-+
-+static inline void pcie_pdi_big_endian(int pcie_port)
-+{
-+ u32 reg;
-+
-+ /* SRAM2PDI endianness control. */
-+ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
-+ /* Config AHB->PCIe and PDI endianness */
-+ reg |= IFX_RCU_AHB_BE_PCIE_PDI;
-+ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
-+}
-+
-+static inline void pcie_pdi_pmu_enable(int pcie_port)
-+{
-+ struct clk *clk;
-+ clk = clk_get_sys("ltq_pcie", "pdi");
-+ clk_enable(clk);
-+ //ltq_pmu1_enable(1<<IFX_PMU1_MODULE_PDI);
-+}
-+
-+static inline void pcie_core_rst_assert(int pcie_port)
-+{
-+ u32 reg;
-+
-+ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+
-+ /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly */
-+ reg |= 0x00400000;
-+ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_core_rst_deassert(int pcie_port)
-+{
-+ u32 reg;
-+
-+ /* Make sure one micro-second delay */
-+ udelay(1);
-+
-+ /* Reset PCIe PHY & Core, bit 22 */
-+ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+ reg &= ~0x00400000;
-+ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_phy_rst_assert(int pcie_port)
-+{
-+ u32 reg;
-+
-+ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+ reg |= 0x00001000; /* Bit 12 */
-+ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_phy_rst_deassert(int pcie_port)
-+{
-+ u32 reg;
-+
-+ /* Make sure one micro-second delay */
-+ udelay(1);
-+
-+ reg = IFX_REG_R32(IFX_RCU_RST_REQ);
-+ reg &= ~0x00001000; /* Bit 12 */
-+ IFX_REG_W32(reg, IFX_RCU_RST_REQ);
-+}
-+
-+static inline void pcie_device_rst_assert(int pcie_port)
-+{
-+ gpio_set_value(IFX_PCIE_GPIO_RESET, 0);
-+ // ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+}
-+
-+static inline void pcie_device_rst_deassert(int pcie_port)
-+{
-+ mdelay(100);
-+ gpio_set_value(IFX_PCIE_GPIO_RESET, 1);
-+// ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);
-+}
-+
-+static inline void pcie_core_pmu_setup(int pcie_port)
-+{
-+ struct clk *clk;
-+ clk = clk_get_sys("ltq_pcie", "ctl");
-+ clk_enable(clk);
-+ clk = clk_get_sys("ltq_pcie", "bus");
-+ clk_enable(clk);
-+
-+ //ltq_pmu1_enable(1 << IFX_PMU1_MODULE_PCIE_CTRL);
-+ //ltq_pmu_enable(1 << IFX_PMU_MODULE_PCIE_L0_CLK);
-+}
-+
-+static inline void pcie_msi_init(int pcie_port)
-+{
-+ struct clk *clk;
-+ pcie_msi_pic_init(pcie_port);
-+ clk = clk_get_sys("ltq_pcie", "msi");
-+ clk_enable(clk);
-+ //ltq_pmu1_enable(1 << IFX_PMU1_MODULE_MSI);
-+}
-+
-+static inline u32
-+ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port)
-+{
-+ u32 tbus_number = bus_number;
-+
-+#ifdef CONFIG_IFX_PCI
-+ if (pcibios_host_nr() > 1) {
-+ tbus_number -= pcibios_1st_host_bus_nr();
-+ }
-+#endif /* CONFIG_IFX_PCI */
-+ return tbus_number;
-+}
-+
-+static inline u32
-+ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read)
-+{
-+ struct pci_dev *pdev;
-+ u32 tvalue = value;
-+
-+ /* Sanity check */
-+ pdev = pci_get_slot(bus, devfn);
-+ if (pdev == NULL) {
-+ return tvalue;
-+ }
-+
-+ /* Only care about PCI bridge */
-+ if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
-+ return tvalue;
-+ }
-+
-+ if (read) { /* Read hack */
-+ #ifdef CONFIG_IFX_PCI
-+ if (pcibios_host_nr() > 1) {
-+ tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue);
-+ }
-+ #endif /* CONFIG_IFX_PCI */
-+ }
-+ else { /* Write hack */
-+ #ifdef CONFIG_IFX_PCI
-+ if (pcibios_host_nr() > 1) {
-+ tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue);
-+ }
-+ #endif
-+ }
-+ return tvalue;
-+}
-+
-+#endif /* IFXMIPS_PCIE_VR9_H */
-+
--- /dev/null
+From 7bd37f8a051a3760aa86da081e3b4d1e96c19dbf Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 29 Sep 2011 20:30:40 +0200
+Subject: [PATCH 56/73] MIPS: lantiq: VPE extensions
+
+---
+ arch/mips/Kconfig | 22 +++
+ arch/mips/include/asm/mipsmtregs.h | 54 +++++++
+ arch/mips/kernel/Makefile | 3 +-
+ arch/mips/kernel/mips-mt.c | 97 +++++++++++--
+ arch/mips/kernel/mtsched_proc.c | 279 ++++++++++++++++++++++++++++++++++++
+ arch/mips/kernel/perf_proc.c | 191 ++++++++++++++++++++++++
+ arch/mips/kernel/proc.c | 17 +++
+ arch/mips/kernel/smtc.c | 7 +
+ arch/mips/kernel/vpe.c | 250 ++++++++++++++++++++++++++++++++-
+ 9 files changed, 905 insertions(+), 15 deletions(-)
+ create mode 100644 arch/mips/kernel/mtsched_proc.c
+ create mode 100644 arch/mips/kernel/perf_proc.c
+
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index bbaff9b..902aedb 100644
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -1897,6 +1897,28 @@ config MIPS_VPE_LOADER
+ Includes a loader for loading an elf relocatable object
+ onto another VPE and running it.
+
++config IFX_VPE_EXT
++ bool "IFX APRP Extensions"
++ depends on MIPS_VPE_LOADER
++ default y
++ help
++ IFX included extensions in APRP
++
++config PERFCTRS
++ bool "34K Performance counters"
++ depends on MIPS_MT && PROC_FS
++ default n
++ help
++ 34K Performance counter through /proc
++
++config MTSCHED
++ bool "Support mtsched priority configuration for TCs"
++ depends on MIPS_MT && PROC_FS
++ default y
++ help
++ Support for mtsched priority configuration for TCs through
++ /proc/mips/mtsched
++
+ config MIPS_MT_SMTC_IM_BACKSTOP
+ bool "Use per-TC register bits as backstop for inhibited IM bits"
+ depends on MIPS_MT_SMTC
+diff --git a/arch/mips/include/asm/mipsmtregs.h b/arch/mips/include/asm/mipsmtregs.h
+index c9420aa..04bfb4b 100644
+--- a/arch/mips/include/asm/mipsmtregs.h
++++ b/arch/mips/include/asm/mipsmtregs.h
+@@ -28,14 +28,34 @@
+ #define read_c0_vpeconf0() __read_32bit_c0_register($1, 2)
+ #define write_c0_vpeconf0(val) __write_32bit_c0_register($1, 2, val)
+
++#define read_c0_vpeconf1() __read_32bit_c0_register($1, 3)
++#define write_c0_vpeconf1(val) __write_32bit_c0_register($1, 3, val)
++
++#define read_c0_vpeschedule() __read_32bit_c0_register($1, 5)
++#define write_c0_vpeschedule(val) __write_32bit_c0_register($1, 5, val)
++
++#define read_c0_vpeschefback() __read_32bit_c0_register($1, 6)
++#define write_c0_vpeschefback(val) __write_32bit_c0_register($1, 6, val)
++
++#define read_c0_vpeopt() __read_32bit_c0_register($1, 7)
++#define write_c0_vpeopt(val) __write_32bit_c0_register($1, 7, val)
++
+ #define read_c0_tcstatus() __read_32bit_c0_register($2, 1)
+ #define write_c0_tcstatus(val) __write_32bit_c0_register($2, 1, val)
+
+ #define read_c0_tcbind() __read_32bit_c0_register($2, 2)
++#define write_c0_tcbind(val) __write_32bit_c0_register($2, 2, val)
+
+ #define read_c0_tccontext() __read_32bit_c0_register($2, 5)
+ #define write_c0_tccontext(val) __write_32bit_c0_register($2, 5, val)
+
++#define read_c0_tcschedule() __read_32bit_c0_register($2, 6)
++#define write_c0_tcschedule(val) __write_32bit_c0_register($2, 6, val)
++
++#define read_c0_tcschefback() __read_32bit_c0_register($2, 7)
++#define write_c0_tcschefback(val) __write_32bit_c0_register($2, 7, val)
++
++
+ #else /* Assembly */
+ /*
+ * Macros for use in assembly language code
+@@ -74,6 +94,8 @@
+ #define MVPCONTROL_STLB_SHIFT 2
+ #define MVPCONTROL_STLB (_ULCAST_(1) << MVPCONTROL_STLB_SHIFT)
+
++#define MVPCONTROL_CPA_SHIFT 3
++#define MVPCONTROL_CPA (_ULCAST_(1) << MVPCONTROL_CPA_SHIFT)
+
+ /* MVPConf0 fields */
+ #define MVPCONF0_PTC_SHIFT 0
+@@ -84,6 +106,8 @@
+ #define MVPCONF0_TCA ( _ULCAST_(1) << MVPCONF0_TCA_SHIFT)
+ #define MVPCONF0_PTLBE_SHIFT 16
+ #define MVPCONF0_PTLBE (_ULCAST_(0x3ff) << MVPCONF0_PTLBE_SHIFT)
++#define MVPCONF0_PCP_SHIFT 27
++#define MVPCONF0_PCP (_ULCAST_(1) << MVPCONF0_PCP_SHIFT)
+ #define MVPCONF0_TLBS_SHIFT 29
+ #define MVPCONF0_TLBS (_ULCAST_(1) << MVPCONF0_TLBS_SHIFT)
+ #define MVPCONF0_M_SHIFT 31
+@@ -121,9 +145,25 @@
+ #define VPECONF0_VPA (_ULCAST_(1) << VPECONF0_VPA_SHIFT)
+ #define VPECONF0_MVP_SHIFT 1
+ #define VPECONF0_MVP (_ULCAST_(1) << VPECONF0_MVP_SHIFT)
++#define VPECONF0_ICS_SHIFT 16
++#define VPECONF0_ICS (_ULCAST_(1) << VPECONF0_ICS_SHIFT)
++#define VPECONF0_DCS_SHIFT 17
++#define VPECONF0_DCS (_ULCAST_(1) << VPECONF0_DCS_SHIFT)
+ #define VPECONF0_XTC_SHIFT 21
+ #define VPECONF0_XTC (_ULCAST_(0xff) << VPECONF0_XTC_SHIFT)
+
++/* VPEOpt fields */
++#define VPEOPT_DWX_SHIFT 0
++#define VPEOPT_IWX_SHIFT 8
++#define VPEOPT_IWX0 ( _ULCAST_(0x1) << VPEOPT_IWX_SHIFT)
++#define VPEOPT_IWX1 ( _ULCAST_(0x2) << VPEOPT_IWX_SHIFT)
++#define VPEOPT_IWX2 ( _ULCAST_(0x4) << VPEOPT_IWX_SHIFT)
++#define VPEOPT_IWX3 ( _ULCAST_(0x8) << VPEOPT_IWX_SHIFT)
++#define VPEOPT_DWX0 ( _ULCAST_(0x1) << VPEOPT_DWX_SHIFT)
++#define VPEOPT_DWX1 ( _ULCAST_(0x2) << VPEOPT_DWX_SHIFT)
++#define VPEOPT_DWX2 ( _ULCAST_(0x4) << VPEOPT_DWX_SHIFT)
++#define VPEOPT_DWX3 ( _ULCAST_(0x8) << VPEOPT_DWX_SHIFT)
++
+ /* TCStatus fields (per TC) */
+ #define TCSTATUS_TASID (_ULCAST_(0xff))
+ #define TCSTATUS_IXMT_SHIFT 10
+@@ -350,6 +390,14 @@ do { \
+ #define write_vpe_c0_vpecontrol(val) mttc0(1, 1, val)
+ #define read_vpe_c0_vpeconf0() mftc0(1, 2)
+ #define write_vpe_c0_vpeconf0(val) mttc0(1, 2, val)
++#define read_vpe_c0_vpeschedule() mftc0(1, 5)
++#define write_vpe_c0_vpeschedule(val) mttc0(1, 5, val)
++#define read_vpe_c0_vpeschefback() mftc0(1, 6)
++#define write_vpe_c0_vpeschefback(val) mttc0(1, 6, val)
++#define read_vpe_c0_vpeopt() mftc0(1, 7)
++#define write_vpe_c0_vpeopt(val) mttc0(1, 7, val)
++#define read_vpe_c0_wired() mftc0(6, 0)
++#define write_vpe_c0_wired(val) mttc0(6, 0, val)
+ #define read_vpe_c0_count() mftc0(9, 0)
+ #define write_vpe_c0_count(val) mttc0(9, 0, val)
+ #define read_vpe_c0_status() mftc0(12, 0)
+@@ -381,6 +429,12 @@ do { \
+ #define write_tc_c0_tchalt(val) mttc0(2, 4, val)
+ #define read_tc_c0_tccontext() mftc0(2, 5)
+ #define write_tc_c0_tccontext(val) mttc0(2, 5, val)
++#define read_tc_c0_tcschedule() mftc0(2, 6)
++#define write_tc_c0_tcschedule(val) mttc0(2, 6, val)
++#define read_tc_c0_tcschefback() mftc0(2, 7)
++#define write_tc_c0_tcschefback(val) mttc0(2, 7, val)
++#define read_tc_c0_entryhi() mftc0(10, 0)
++#define write_tc_c0_entryhi(val) mttc0(10, 0, val)
+
+ /* GPR */
+ #define read_tc_gpr_sp() mftgpr(29)
+diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
+index 1a96618..bc5989e 100644
+--- a/arch/mips/kernel/Makefile
++++ b/arch/mips/kernel/Makefile
+@@ -88,7 +88,8 @@ obj-$(CONFIG_MIPS32_O32) += binfmt_elfo32.o scall64-o32.o
+
+ obj-$(CONFIG_KGDB) += kgdb.o
+ obj-$(CONFIG_PROC_FS) += proc.o
+-
++obj-$(CONFIG_MTSCHED) += mtsched_proc.o
++obj-$(CONFIG_PERFCTRS) += perf_proc.o
+ obj-$(CONFIG_64BIT) += cpu-bugs64.o
+
+ obj-$(CONFIG_I8253) += i8253.o
+diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c
+index c23d11f..11d6489 100644
+--- a/arch/mips/kernel/mips-mt.c
++++ b/arch/mips/kernel/mips-mt.c
+@@ -21,26 +21,96 @@
+ #include <asm/cacheflush.h>
+
+ int vpelimit;
+-
+ static int __init maxvpes(char *str)
+ {
+ get_option(&str, &vpelimit);
+-
+ return 1;
+ }
+-
+ __setup("maxvpes=", maxvpes);
+
+ int tclimit;
+-
+ static int __init maxtcs(char *str)
+ {
+ get_option(&str, &tclimit);
++ return 1;
++}
++__setup("maxtcs=", maxtcs);
+
++#ifdef CONFIG_IFX_VPE_EXT
++int stlb;
++static int __init istlbshared(char *str)
++{
++ get_option(&str, &stlb);
+ return 1;
+ }
++__setup("vpe_tlb_shared=", istlbshared);
+
+-__setup("maxtcs=", maxtcs);
++int vpe0_wired;
++static int __init vpe0wired(char *str)
++{
++ get_option(&str, &vpe0_wired);
++ return 1;
++}
++__setup("vpe0_wired_tlb_entries=", vpe0wired);
++
++int vpe1_wired;
++static int __init vpe1wired(char *str)
++{
++ get_option(&str, &vpe1_wired);
++ return 1;
++}
++__setup("vpe1_wired_tlb_entries=", vpe1wired);
++
++#ifdef CONFIG_MIPS_MT_SMTC
++extern int nostlb;
++#endif
++void configure_tlb(void)
++{
++ int vpeflags, tcflags, tlbsiz;
++ unsigned int config1val;
++ vpeflags = dvpe();
++ tcflags = dmt();
++ write_c0_vpeconf0((read_c0_vpeconf0() | VPECONF0_MVP));
++ write_c0_mvpcontrol((read_c0_mvpcontrol() | MVPCONTROL_VPC));
++ mips_ihb();
++ //printk("stlb = %d, vpe0_wired = %d vpe1_wired=%d\n", stlb,vpe0_wired, vpe1_wired);
++ if (stlb) {
++ if (!(read_c0_mvpconf0() & MVPCONF0_TLBS)) {
++ emt(tcflags);
++ evpe(vpeflags);
++ return;
++ }
++
++ write_c0_mvpcontrol(read_c0_mvpcontrol() | MVPCONTROL_STLB);
++ write_c0_wired(vpe0_wired + vpe1_wired);
++ if (((read_vpe_c0_config() & MIPS_CONF_MT) >> 7) == 1) {
++ config1val = read_vpe_c0_config1();
++ tlbsiz = (((config1val >> 25) & 0x3f) + 1);
++ if (tlbsiz > 64)
++ tlbsiz = 64;
++ cpu_data[0].tlbsize = tlbsiz;
++ current_cpu_data.tlbsize = tlbsiz;
++ }
++
++ }
++ else {
++ write_c0_mvpcontrol(read_c0_mvpcontrol() & ~MVPCONTROL_STLB);
++ write_c0_wired(vpe0_wired);
++ }
++
++ ehb();
++ write_c0_mvpcontrol((read_c0_mvpcontrol() & ~MVPCONTROL_VPC));
++ ehb();
++ local_flush_tlb_all();
++
++ printk("Wired TLB entries for Linux read_c0_wired() = %d\n", read_c0_wired());
++#ifdef CONFIG_MIPS_MT_SMTC
++ nostlb = !stlb;
++#endif
++ emt(tcflags);
++ evpe(vpeflags);
++}
++#endif
+
+ /*
+ * Dump new MIPS MT state for the core. Does not leave TCs halted.
+@@ -78,18 +148,18 @@ void mips_mt_regdump(unsigned long mvpctl)
+ if ((read_tc_c0_tcbind() & TCBIND_CURVPE) == i) {
+ printk(" VPE %d\n", i);
+ printk(" VPEControl : %08lx\n",
+- read_vpe_c0_vpecontrol());
++ read_vpe_c0_vpecontrol());
+ printk(" VPEConf0 : %08lx\n",
+- read_vpe_c0_vpeconf0());
++ read_vpe_c0_vpeconf0());
+ printk(" VPE%d.Status : %08lx\n",
+- i, read_vpe_c0_status());
++ i, read_vpe_c0_status());
+ printk(" VPE%d.EPC : %08lx %pS\n",
+- i, read_vpe_c0_epc(),
+- (void *) read_vpe_c0_epc());
++ i, read_vpe_c0_epc(),
++ (void *) read_vpe_c0_epc());
+ printk(" VPE%d.Cause : %08lx\n",
+- i, read_vpe_c0_cause());
++ i, read_vpe_c0_cause());
+ printk(" VPE%d.Config7 : %08lx\n",
+- i, read_vpe_c0_config7());
++ i, read_vpe_c0_config7());
+ break; /* Next VPE */
+ }
+ }
+@@ -287,6 +357,9 @@ void mips_mt_set_cpuoptions(void)
+ printk("Mapped %ld ITC cells starting at 0x%08x\n",
+ ((itcblkgrn & 0x7fe00000) >> 20), itc_base);
+ }
++#ifdef CONFIG_IFX_VPE_EXT
++ configure_tlb();
++#endif
+ }
+
+ /*
+diff --git a/arch/mips/kernel/mtsched_proc.c b/arch/mips/kernel/mtsched_proc.c
+new file mode 100644
+index 0000000..4dafded
+--- /dev/null
++++ b/arch/mips/kernel/mtsched_proc.c
+@@ -0,0 +1,279 @@
++/*
++ * /proc hooks for MIPS MT scheduling policy management for 34K cores
++ *
++ * This program is free software; you can distribute it and/or modify it
++ * under the terms of the GNU General Public License (Version 2) as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
++ * for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
++ *
++ * Copyright (C) 2006 Mips Technologies, Inc
++ */
++
++#include <linux/kernel.h>
++
++#include <asm/cpu.h>
++#include <asm/processor.h>
++#include <asm/system.h>
++#include <asm/mipsregs.h>
++#include <asm/mipsmtregs.h>
++#include <asm/uaccess.h>
++#include <linux/proc_fs.h>
++
++static struct proc_dir_entry *mtsched_proc;
++
++#ifndef CONFIG_MIPS_MT_SMTC
++#define NTCS 2
++#else
++#define NTCS NR_CPUS
++#endif
++#define NVPES 2
++
++int lastvpe = 1;
++int lasttc = 8;
++
++static int proc_read_mtsched(char *page, char **start, off_t off,
++ int count, int *eof, void *data)
++{
++ int totalen = 0;
++ int len;
++
++ int i;
++ int vpe;
++ int mytc;
++ unsigned long flags;
++ unsigned int mtflags;
++ unsigned int haltstate;
++ unsigned int vpes_checked[NVPES];
++ unsigned int vpeschedule[NVPES];
++ unsigned int vpeschefback[NVPES];
++ unsigned int tcschedule[NTCS];
++ unsigned int tcschefback[NTCS];
++
++ /* Dump the state of the MIPS MT scheduling policy manager */
++ /* Inititalize control state */
++ for(i = 0; i < NVPES; i++) {
++ vpes_checked[i] = 0;
++ vpeschedule[i] = 0;
++ vpeschefback[i] = 0;
++ }
++ for(i = 0; i < NTCS; i++) {
++ tcschedule[i] = 0;
++ tcschefback[i] = 0;
++ }
++
++ /* Disable interrupts and multithreaded issue */
++ local_irq_save(flags);
++ mtflags = dvpe();
++
++ /* Then go through the TCs, halt 'em, and extract the values */
++ mytc = (read_c0_tcbind() & TCBIND_CURTC) >> TCBIND_CURTC_SHIFT;
++ for(i = 0; i < NTCS; i++) {
++ if(i == mytc) {
++ /* No need to halt ourselves! */
++ tcschedule[i] = read_c0_tcschedule();
++ tcschefback[i] = read_c0_tcschefback();
++ /* If VPE bound to TC hasn't been checked, do it */
++ vpe = read_c0_tcbind() & TCBIND_CURVPE;
++ if(!vpes_checked[vpe]) {
++ vpeschedule[vpe] = read_c0_vpeschedule();
++ vpeschefback[vpe] = read_c0_vpeschefback();
++ vpes_checked[vpe] = 1;
++ }
++ } else {
++ settc(i);
++ haltstate = read_tc_c0_tchalt();
++ write_tc_c0_tchalt(TCHALT_H);
++ mips_ihb();
++ tcschedule[i] = read_tc_c0_tcschedule();
++ tcschefback[i] = read_tc_c0_tcschefback();
++ /* If VPE bound to TC hasn't been checked, do it */
++ vpe = read_tc_c0_tcbind() & TCBIND_CURVPE;
++ if(!vpes_checked[vpe]) {
++ vpeschedule[vpe] = read_vpe_c0_vpeschedule();
++ vpeschefback[vpe] = read_vpe_c0_vpeschefback();
++ vpes_checked[vpe] = 1;
++ }
++ if(!haltstate) write_tc_c0_tchalt(0);
++ }
++ }
++ /* Re-enable MT and interrupts */
++ evpe(mtflags);
++ local_irq_restore(flags);
++
++ for(vpe=0; vpe < NVPES; vpe++) {
++ len = sprintf(page, "VPE[%d].VPEschedule = 0x%08x\n",
++ vpe, vpeschedule[vpe]);
++ totalen += len;
++ page += len;
++ len = sprintf(page, "VPE[%d].VPEschefback = 0x%08x\n",
++ vpe, vpeschefback[vpe]);
++ totalen += len;
++ page += len;
++ }
++ for(i=0; i < NTCS; i++) {
++ len = sprintf(page, "TC[%d].TCschedule = 0x%08x\n",
++ i, tcschedule[i]);
++ totalen += len;
++ page += len;
++ len = sprintf(page, "TC[%d].TCschefback = 0x%08x\n",
++ i, tcschefback[i]);
++ totalen += len;
++ page += len;
++ }
++ return totalen;
++}
++
++/*
++ * Write to perf counter registers based on text input
++ */
++
++#define TXTBUFSZ 100
++
++static int proc_write_mtsched(struct file *file, const char *buffer,
++ unsigned long count, void *data)
++{
++ int len = 0;
++ char mybuf[TXTBUFSZ];
++ /* At most, we will set up 9 TCs and 2 VPEs, 11 entries in all */
++ char entity[1]; //, entity1[1];
++ int number[1];
++ unsigned long value[1];
++ int nparsed = 0 , index = 0;
++ unsigned long flags;
++ unsigned int mtflags;
++ unsigned int haltstate;
++ unsigned int tcbindval;
++
++ if(count >= TXTBUFSZ) len = TXTBUFSZ-1;
++ else len = count;
++ memset(mybuf,0,TXTBUFSZ);
++ if(copy_from_user(mybuf, buffer, len)) return -EFAULT;
++
++ nparsed = sscanf(mybuf, "%c%d %lx",
++ &entity[0] ,&number[0], &value[0]);
++
++ /*
++ * Having acquired the inputs, which might have
++ * generated exceptions and preemptions,
++ * program the registers.
++ */
++ /* Disable interrupts and multithreaded issue */
++ local_irq_save(flags);
++ mtflags = dvpe();
++
++ if(entity[index] == 't' ) {
++ /* Set TCSchedule or TCScheFBack of specified TC */
++ if(number[index] > NTCS) goto skip;
++ /* If it's our own TC, do it direct */
++ if(number[index] ==
++ ((read_c0_tcbind() & TCBIND_CURTC)
++ >> TCBIND_CURTC_SHIFT)) {
++ if(entity[index] == 't')
++ write_c0_tcschedule(value[index]);
++ else
++ write_c0_tcschefback(value[index]);
++ } else {
++ /* Otherwise, we do it via MTTR */
++ settc(number[index]);
++ haltstate = read_tc_c0_tchalt();
++ write_tc_c0_tchalt(TCHALT_H);
++ mips_ihb();
++ if(entity[index] == 't')
++ write_tc_c0_tcschedule(value[index]);
++ else
++ write_tc_c0_tcschefback(value[index]);
++ mips_ihb();
++ if(!haltstate) write_tc_c0_tchalt(0);
++ }
++ } else if(entity[index] == 'v') {
++ /* Set VPESchedule of specified VPE */
++ if(number[index] > NVPES) goto skip;
++ tcbindval = read_c0_tcbind();
++ /* Are we doing this to our current VPE? */
++ if((tcbindval & TCBIND_CURVPE) == number[index]) {
++ /* Then life is simple */
++ write_c0_vpeschedule(value[index]);
++ } else {
++ /*
++ * Bind ourselves to the other VPE long enough
++ * to program the bind value.
++ */
++ write_c0_tcbind((tcbindval & ~TCBIND_CURVPE)
++ | number[index]);
++ mips_ihb();
++ write_c0_vpeschedule(value[index]);
++ mips_ihb();
++ /* Restore previous binding */
++ write_c0_tcbind(tcbindval);
++ mips_ihb();
++ }
++ }
++
++ else if(entity[index] == 'r') {
++ unsigned int vpes_checked[2], vpe ,i , mytc;
++ vpes_checked[0] = vpes_checked[1] = 0;
++
++ /* Then go through the TCs, halt 'em, and extract the values */
++ mytc = (read_c0_tcbind() & TCBIND_CURTC) >> TCBIND_CURTC_SHIFT;
++
++ for(i = 0; i < NTCS; i++) {
++ if(i == mytc) {
++ /* No need to halt ourselves! */
++ write_c0_vpeschefback(0);
++ write_c0_tcschefback(0);
++ } else {
++ settc(i);
++ haltstate = read_tc_c0_tchalt();
++ write_tc_c0_tchalt(TCHALT_H);
++ mips_ihb();
++ write_tc_c0_tcschefback(0);
++ /* If VPE bound to TC hasn't been checked, do it */
++ vpe = read_tc_c0_tcbind() & TCBIND_CURVPE;
++ if(!vpes_checked[vpe]) {
++ write_vpe_c0_vpeschefback(0);
++ vpes_checked[vpe] = 1;
++ }
++ if(!haltstate) write_tc_c0_tchalt(0);
++ }
++ }
++ }
++ else {
++ printk ("\n Usage : <t/v><0/1> <Hex Value>\n Example : t0 0x01\n");
++ }
++
++skip:
++ /* Re-enable MT and interrupts */
++ evpe(mtflags);
++ local_irq_restore(flags);
++ return (len);
++}
++
++static int __init init_mtsched_proc(void)
++{
++ extern struct proc_dir_entry *get_mips_proc_dir(void);
++ struct proc_dir_entry *mips_proc_dir;
++
++ if (!cpu_has_mipsmt) {
++ printk("mtsched: not a MIPS MT capable processor\n");
++ return -ENODEV;
++ }
++
++ mips_proc_dir = get_mips_proc_dir();
++
++ mtsched_proc = create_proc_entry("mtsched", 0644, mips_proc_dir);
++ mtsched_proc->read_proc = proc_read_mtsched;
++ mtsched_proc->write_proc = proc_write_mtsched;
++
++ return 0;
++}
++
++/* Automagically create the entry */
++module_init(init_mtsched_proc);
+diff --git a/arch/mips/kernel/perf_proc.c b/arch/mips/kernel/perf_proc.c
+new file mode 100644
+index 0000000..7eec015
+--- /dev/null
++++ b/arch/mips/kernel/perf_proc.c
+@@ -0,0 +1,191 @@
++/*
++ * /proc hooks for CPU performance counter support for SMTC kernel
++ * (and ultimately others)
++ * Copyright (C) 2006 Mips Technologies, Inc
++ */
++
++#include <linux/kernel.h>
++
++#include <asm/cpu.h>
++#include <asm/processor.h>
++#include <asm/system.h>
++#include <asm/mipsregs.h>
++#include <asm/uaccess.h>
++#include <linux/proc_fs.h>
++
++/*
++ * /proc diagnostic and statistics hooks
++ */
++
++
++/* Internal software-extended event counters */
++
++static unsigned long long extencount[4] = {0,0,0,0};
++
++static struct proc_dir_entry *perf_proc;
++
++static int proc_read_perf(char *page, char **start, off_t off,
++ int count, int *eof, void *data)
++{
++ int totalen = 0;
++ int len;
++
++ len = sprintf(page, "PerfCnt[0].Ctl : 0x%08x\n", read_c0_perfctrl0());
++ totalen += len;
++ page += len;
++ len = sprintf(page, "PerfCnt[0].Cnt : %Lu\n",
++ extencount[0] + (unsigned long long)((unsigned)read_c0_perfcntr0()));
++ totalen += len;
++ page += len;
++ len = sprintf(page, "PerfCnt[1].Ctl : 0x%08x\n", read_c0_perfctrl1());
++ totalen += len;
++ page += len;
++ len = sprintf(page, "PerfCnt[1].Cnt : %Lu\n",
++ extencount[1] + (unsigned long long)((unsigned)read_c0_perfcntr1()));
++ totalen += len;
++ page += len;
++ len = sprintf(page, "PerfCnt[2].Ctl : 0x%08x\n", read_c0_perfctrl2());
++ totalen += len;
++ page += len;
++ len = sprintf(page, "PerfCnt[2].Cnt : %Lu\n",
++ extencount[2] + (unsigned long long)((unsigned)read_c0_perfcntr2()));
++ totalen += len;
++ page += len;
++ len = sprintf(page, "PerfCnt[3].Ctl : 0x%08x\n", read_c0_perfctrl3());
++ totalen += len;
++ page += len;
++ len = sprintf(page, "PerfCnt[3].Cnt : %Lu\n",
++ extencount[3] + (unsigned long long)((unsigned)read_c0_perfcntr3()));
++ totalen += len;
++ page += len;
++
++ return totalen;
++}
++
++/*
++ * Write to perf counter registers based on text input
++ */
++
++#define TXTBUFSZ 100
++
++static int proc_write_perf(struct file *file, const char *buffer,
++ unsigned long count, void *data)
++{
++ int len;
++ int nparsed;
++ int index;
++ char mybuf[TXTBUFSZ];
++
++ int which[4];
++ unsigned long control[4];
++ long long ctrdata[4];
++
++ if(count >= TXTBUFSZ) len = TXTBUFSZ-1;
++ else len = count;
++ memset(mybuf,0,TXTBUFSZ);
++ if(copy_from_user(mybuf, buffer, len)) return -EFAULT;
++
++ nparsed = sscanf(mybuf,
++ "%d %lx %Ld %d %lx %Ld %d %lx %Ld %d %lx %Ld",
++ &which[0], &control[0], &ctrdata[0],
++ &which[1], &control[1], &ctrdata[1],
++ &which[2], &control[2], &ctrdata[2],
++ &which[3], &control[3], &ctrdata[3]);
++
++ for(index = 0; nparsed >= 3; index++) {
++ switch (which[index]) {
++ case 0:
++ write_c0_perfctrl0(control[index]);
++ if(ctrdata[index] != -1) {
++ extencount[0] = (unsigned long long)ctrdata[index];
++ write_c0_perfcntr0((unsigned long)0);
++ }
++ break;
++ case 1:
++ write_c0_perfctrl1(control[index]);
++ if(ctrdata[index] != -1) {
++ extencount[1] = (unsigned long long)ctrdata[index];
++ write_c0_perfcntr1((unsigned long)0);
++ }
++ break;
++ case 2:
++ write_c0_perfctrl2(control[index]);
++ if(ctrdata[index] != -1) {
++ extencount[2] = (unsigned long long)ctrdata[index];
++ write_c0_perfcntr2((unsigned long)0);
++ }
++ break;
++ case 3:
++ write_c0_perfctrl3(control[index]);
++ if(ctrdata[index] != -1) {
++ extencount[3] = (unsigned long long)ctrdata[index];
++ write_c0_perfcntr3((unsigned long)0);
++ }
++ break;
++ }
++ nparsed -= 3;
++ }
++ return (len);
++}
++
++extern int (*perf_irq)(void);
++
++/*
++ * Invoked when timer interrupt vector picks up a perf counter overflow
++ */
++
++static int perf_proc_irq(void)
++{
++ unsigned long snapshot;
++
++ /*
++ * It would be nice to do this as a loop, but we don't have
++ * indirect access to CP0 registers.
++ */
++ snapshot = read_c0_perfcntr0();
++ if ((long)snapshot < 0) {
++ extencount[0] +=
++ (unsigned long long)((unsigned)read_c0_perfcntr0());
++ write_c0_perfcntr0(0);
++ }
++ snapshot = read_c0_perfcntr1();
++ if ((long)snapshot < 0) {
++ extencount[1] +=
++ (unsigned long long)((unsigned)read_c0_perfcntr1());
++ write_c0_perfcntr1(0);
++ }
++ snapshot = read_c0_perfcntr2();
++ if ((long)snapshot < 0) {
++ extencount[2] +=
++ (unsigned long long)((unsigned)read_c0_perfcntr2());
++ write_c0_perfcntr2(0);
++ }
++ snapshot = read_c0_perfcntr3();
++ if ((long)snapshot < 0) {
++ extencount[3] +=
++ (unsigned long long)((unsigned)read_c0_perfcntr3());
++ write_c0_perfcntr3(0);
++ }
++ return 0;
++}
++
++static int __init init_perf_proc(void)
++{
++ extern struct proc_dir_entry *get_mips_proc_dir(void);
++
++ struct proc_dir_entry *mips_proc_dir = get_mips_proc_dir();
++
++ write_c0_perfcntr0(0);
++ write_c0_perfcntr1(0);
++ write_c0_perfcntr2(0);
++ write_c0_perfcntr3(0);
++ perf_proc = create_proc_entry("perf", 0644, mips_proc_dir);
++ perf_proc->read_proc = proc_read_perf;
++ perf_proc->write_proc = proc_write_perf;
++ perf_irq = perf_proc_irq;
++
++ return 0;
++}
++
++/* Automagically create the entry */
++module_init(init_perf_proc);
+diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
+index e309665..2de204f 100644
+--- a/arch/mips/kernel/proc.c
++++ b/arch/mips/kernel/proc.c
+@@ -7,6 +7,7 @@
+ #include <linux/kernel.h>
+ #include <linux/sched.h>
+ #include <linux/seq_file.h>
++#include <linux/proc_fs.h>
+ #include <asm/bootinfo.h>
+ #include <asm/cpu.h>
+ #include <asm/cpu-features.h>
+@@ -110,3 +111,19 @@ const struct seq_operations cpuinfo_op = {
+ .stop = c_stop,
+ .show = show_cpuinfo,
+ };
++
++/*
++ * Support for MIPS/local /proc hooks in /proc/mips/
++ */
++
++static struct proc_dir_entry *mips_proc = NULL;
++
++struct proc_dir_entry *get_mips_proc_dir(void)
++{
++ /*
++ * This ought not to be preemptable.
++ */
++ if(mips_proc == NULL)
++ mips_proc = proc_mkdir("mips", NULL);
++ return(mips_proc);
++}
+diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
+index f0895e7..199e853 100644
+--- a/arch/mips/kernel/smtc.c
++++ b/arch/mips/kernel/smtc.c
+@@ -1334,6 +1334,13 @@ void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
+ asid = asid_cache(cpu);
+
+ do {
++#ifdef CONFIG_IFX_VPE_EXT
++ /* If TLB is shared between AP and RP (AP is running SMTC),
++ leave out max ASID i.e., ASID_MASK for RP
++ */
++ if (!nostlb && ((asid & ASID_MASK) == (ASID_MASK - 1)))
++ asid++;
++#endif
+ if (!((asid += ASID_INC) & ASID_MASK) ) {
+ if (cpu_has_vtag_icache)
+ flush_icache_all();
+diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
+index bfa12a4..e338ba5 100644
+--- a/arch/mips/kernel/vpe.c
++++ b/arch/mips/kernel/vpe.c
+@@ -75,6 +75,58 @@ static struct kspd_notifications kspd_events;
+ static int kspd_events_reqd;
+ #endif
+
++#ifdef CONFIG_IFX_VPE_EXT
++static int is_sdepgm;
++extern int stlb;
++extern int vpe0_wired;
++extern int vpe1_wired;
++unsigned int vpe1_load_addr;
++
++static int __init load_address(char *str)
++{
++ get_option(&str, &vpe1_load_addr);
++ return 1;
++}
++__setup("vpe1_load_addr=", load_address);
++
++#include <asm/mipsmtregs.h>
++#define write_vpe_c0_wired(val) mttc0(6, 0, val)
++
++#ifndef COMMAND_LINE_SIZE
++# define COMMAND_LINE_SIZE 512
++#endif
++
++char command_line[COMMAND_LINE_SIZE * 2];
++
++static unsigned int vpe1_mem;
++static int __init vpe1mem(char *str)
++{
++ vpe1_mem = memparse(str, &str);
++ return 1;
++}
++__setup("vpe1_mem=", vpe1mem);
++
++uint32_t vpe1_wdog_ctr;
++static int __init wdog_ctr(char *str)
++{
++ get_option(&str, &vpe1_wdog_ctr);
++ return 1;
++}
++
++__setup("vpe1_wdog_ctr_addr=", wdog_ctr);
++EXPORT_SYMBOL(vpe1_wdog_ctr);
++
++uint32_t vpe1_wdog_timeout;
++static int __init wdog_timeout(char *str)
++{
++ get_option(&str, &vpe1_wdog_timeout);
++ return 1;
++}
++
++__setup("vpe1_wdog_timeout=", wdog_timeout);
++EXPORT_SYMBOL(vpe1_wdog_timeout);
++
++#endif
+ /* grab the likely amount of memory we will need. */
+ #ifdef CONFIG_MIPS_VPE_LOADER_TOM
+ #define P_SIZE (2 * 1024 * 1024)
+@@ -267,6 +319,13 @@ static void *alloc_progmem(unsigned long len)
+ void *addr;
+
+ #ifdef CONFIG_MIPS_VPE_LOADER_TOM
++#ifdef CONFIG_IFX_VPE_EXT
++ if (vpe1_load_addr) {
++ memset((void *)vpe1_load_addr, 0, len);
++ return (void *)vpe1_load_addr;
++ }
++#endif
++
+ /*
+ * This means you must tell Linux to use less memory than you
+ * physically have, for example by passing a mem= boot argument.
+@@ -745,6 +804,12 @@ static int vpe_run(struct vpe * v)
+ }
+
+ /* Write the address we want it to start running from in the TCPC register. */
++#if defined(CONFIG_IFX_VPE_EXT) && 0
++ if (stlb)
++ write_vpe_c0_wired(vpe0_wired + vpe1_wired);
++ else
++ write_vpe_c0_wired(vpe1_wired);
++#endif
+ write_tc_c0_tcrestart((unsigned long)v->__start);
+ write_tc_c0_tccontext((unsigned long)0);
+
+@@ -758,6 +823,20 @@ static int vpe_run(struct vpe * v)
+
+ write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H);
+
++#if defined(CONFIG_IFX_VPE_EXT) && 0
++ /*
++ * $a2 & $a3 are used to pass command line parameters to VPE1. $a2
++ * points to the start of the command line string and $a3 points to
++ * the end of the string. This convention is identical to the Linux
++ * kernel boot parameter passing mechanism. Please note that $a3 is
++ * used to pass physical memory size or 0 in SDE tool kit. So, if you
++ * are passing comand line parameters through $a2 & $a3 SDE programs
++ * don't work as desired.
++ */
++ mttgpr(6, command_line);
++ mttgpr(7, (command_line + strlen(command_line)));
++ if (is_sdepgm)
++#endif
+ /*
+ * The sde-kit passes 'memsize' to __start in $a3, so set something
+ * here... Or set $a3 to zero and define DFLT_STACK_SIZE and
+@@ -832,6 +911,9 @@ static int find_vpe_symbols(struct vpe * v, Elf_Shdr * sechdrs,
+ if ( (v->__start == 0) || (v->shared_ptr == NULL))
+ return -1;
+
++#ifdef CONFIG_IFX_VPE_EXT
++ is_sdepgm = 1;
++#endif
+ return 0;
+ }
+
+@@ -993,6 +1075,15 @@ static int vpe_elfload(struct vpe * v)
+ (unsigned long)v->load_addr + v->len);
+
+ if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) {
++#ifdef CONFIG_IFX_VPE_EXT
++ if (vpe1_load_addr) {
++ /* Conversion to KSEG1 is required ??? */
++ v->__start = KSEG1ADDR(vpe1_load_addr);
++ is_sdepgm = 0;
++ return 0;
++ }
++#endif
++
+ if (v->__start == 0) {
+ printk(KERN_WARNING "VPE loader: program does not contain "
+ "a __start symbol\n");
+@@ -1063,6 +1154,9 @@ static int vpe_open(struct inode *inode, struct file *filp)
+ struct vpe_notifications *not;
+ struct vpe *v;
+ int ret;
++#ifdef CONFIG_IFX_VPE_EXT
++ int progsize;
++#endif
+
+ if (minor != iminor(inode)) {
+ /* assume only 1 device at the moment. */
+@@ -1088,7 +1182,12 @@ static int vpe_open(struct inode *inode, struct file *filp)
+ release_progmem(v->load_addr);
+ cleanup_tc(get_tc(tclimit));
+ }
+-
++#ifdef CONFIG_IFX_VPE_EXT
++ progsize = (vpe1_mem != 0) ? vpe1_mem : P_SIZE;
++ //printk("progsize = %x\n", progsize);
++ v->pbuffer = vmalloc(progsize);
++ v->plen = progsize;
++#else
+ /* this of-course trashes what was there before... */
+ v->pbuffer = vmalloc(P_SIZE);
+ if (!v->pbuffer) {
+@@ -1096,11 +1195,14 @@ static int vpe_open(struct inode *inode, struct file *filp)
+ return -ENOMEM;
+ }
+ v->plen = P_SIZE;
++#endif
+ v->load_addr = NULL;
+ v->len = 0;
+
++#if 0
+ v->uid = filp->f_cred->fsuid;
+ v->gid = filp->f_cred->fsgid;
++#endif
+
+ #ifdef CONFIG_MIPS_APSP_KSPD
+ /* get kspd to tell us when a syscall_exit happens */
+@@ -1348,6 +1450,133 @@ static void kspd_sp_exit( int sp_id)
+ cleanup_tc(get_tc(sp_id));
+ }
+ #endif
++#ifdef CONFIG_IFX_VPE_EXT
++int32_t vpe1_sw_start(void* sw_start_addr, uint32_t tcmask, uint32_t flags)
++{
++ enum vpe_state state;
++ struct vpe *v = get_vpe(tclimit);
++ struct vpe_notifications *not;
++
++ if (tcmask || flags) {
++ printk(KERN_WARNING "Currently tcmask and flags should be 0.\
++ other values not supported\n");
++ return -1;
++ }
++
++ state = xchg(&v->state, VPE_STATE_INUSE);
++ if (state != VPE_STATE_UNUSED) {
++ vpe_stop(v);
++
++ list_for_each_entry(not, &v->notify, list) {
++ not->stop(tclimit);
++ }
++ }
++
++ v->__start = (unsigned long)sw_start_addr;
++ is_sdepgm = 0;
++
++ if (!vpe_run(v)) {
++ printk(KERN_DEBUG "VPE loader: VPE1 running successfully\n");
++ return 0;
++ }
++ return -1;
++}
++
++EXPORT_SYMBOL(vpe1_sw_start);
++
++int32_t vpe1_sw_stop(uint32_t flags)
++{
++ struct vpe *v = get_vpe(tclimit);
++
++ if (!vpe_free(v)) {
++ printk(KERN_DEBUG "RP Stopped\n");
++ return 0;
++ }
++ else
++ return -1;
++}
++
++EXPORT_SYMBOL(vpe1_sw_stop);
++
++uint32_t vpe1_get_load_addr (uint32_t flags)
++{
++ return vpe1_load_addr;
++}
++
++EXPORT_SYMBOL(vpe1_get_load_addr);
++
++uint32_t vpe1_get_max_mem (uint32_t flags)
++{
++ if (!vpe1_mem)
++ return P_SIZE;
++ else
++ return vpe1_mem;
++}
++
++EXPORT_SYMBOL(vpe1_get_max_mem);
++
++void* vpe1_get_cmdline_argument(void)
++{
++ return saved_command_line;
++}
++
++EXPORT_SYMBOL(vpe1_get_cmdline_argument);
++
++int32_t vpe1_set_boot_param(char *field, char *value, char flags)
++{
++ char *ptr, string[64];
++ int start_off, end_off;
++ if (!field)
++ return -1;
++ strcpy(string, field);
++ if (value) {
++ strcat(string, "=");
++ strcat(string, value);
++ strcat(command_line, " ");
++ strcat(command_line, string);
++ }
++ else {
++ ptr = strstr(command_line, string);
++ if (ptr) {
++ start_off = ptr - command_line;
++ ptr += strlen(string);
++ while ((*ptr != ' ') && (*ptr != '\0'))
++ ptr++;
++ end_off = ptr - command_line;
++ command_line[start_off] = '\0';
++ strcat (command_line, command_line+end_off);
++ }
++ }
++ return 0;
++}
++
++EXPORT_SYMBOL(vpe1_set_boot_param);
++
++int32_t vpe1_get_boot_param(char *field, char **value, char flags)
++{
++ char *ptr, string[64];
++ int i = 0;
++ if (!field)
++ return -1;
++ if ((ptr = strstr(command_line, field))) {
++ ptr += strlen(field) + 1; /* including = */
++ while ((*ptr != ' ') && (*ptr != '\0'))
++ string[i++] = *ptr++;
++ string[i] = '\0';
++ *value = kmalloc((strlen(string) + 1), GFP_KERNEL);
++ if (*value != NULL)
++ strcpy(*value, string);
++ }
++ else
++ *value = NULL;
++
++ return 0;
++}
++
++EXPORT_SYMBOL(vpe1_get_boot_param);
++
++extern void configure_tlb(void);
++#endif
+
+ static ssize_t store_kill(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t len)
+@@ -1429,6 +1658,18 @@ static int __init vpe_module_init(void)
+ printk("VPE loader: not a MIPS MT capable processor\n");
+ return -ENODEV;
+ }
++#ifdef CONFIG_IFX_VPE_EXT
++#ifndef CONFIG_MIPS_MT_SMTC
++ configure_tlb();
++#endif
++#endif
++
++#ifndef CONFIG_MIPS_MT_SMTC
++ if (!vpelimit)
++ vpelimit = 1;
++ if (!tclimit)
++ tclimit = 1;
++#endif
+
+ if (vpelimit == 0) {
+ printk(KERN_WARNING "No VPEs reserved for AP/SP, not "
+@@ -1473,10 +1714,12 @@ static int __init vpe_module_init(void)
+ mtflags = dmt();
+ vpflags = dvpe();
+
++ back_to_back_c0_hazard();
++
+ /* Put MVPE's into 'configuration state' */
+ set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+- /* dump_mtregs(); */
++ dump_mtregs();
+
+ val = read_c0_mvpconf0();
+ hw_tcs = (val & MVPCONF0_PTC) + 1;
+@@ -1488,6 +1731,7 @@ static int __init vpe_module_init(void)
+ * reschedule send IPIs or similar we might hang.
+ */
+ clear_c0_mvpcontrol(MVPCONTROL_VPC);
++ back_to_back_c0_hazard();
+ evpe(vpflags);
+ emt(mtflags);
+ local_irq_restore(flags);
+@@ -1513,6 +1757,7 @@ static int __init vpe_module_init(void)
+ }
+
+ v->ntcs = hw_tcs - tclimit;
++ write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | 1);
+
+ /* add the tc to the list of this vpe's tc's. */
+ list_add(&t->tc, &v->tc);
+@@ -1581,6 +1826,7 @@ static int __init vpe_module_init(void)
+ out_reenable:
+ /* release config state */
+ clear_c0_mvpcontrol(MVPCONTROL_VPC);
++ back_to_back_c0_hazard();
+
+ evpe(vpflags);
+ emt(mtflags);
+--
+1.7.9.1
+
+++ /dev/null
-From b11a96f2bdf1730fe3fd3be1d0667e20a4eb5bff Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sat, 13 Aug 2011 13:59:50 +0200
-Subject: [PATCH 56/70] MIPS: lantiq: make GPIO3 work on AR9
-
-There are 3 16bit and 1 8bit gpio ports on AR9. The gpio driver needs a hack
-at 2 places to make the different register layout of the GPIO3 work properly
-with the driver. Before only GPIO0-2 were supported. As the GPIO number scheme
-clashes with the new size, we also move the other gpio chips to new offsets.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
----
- .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 2 +
- arch/mips/lantiq/xway/devices.c | 3 +
- arch/mips/lantiq/xway/gpio.c | 84 ++++++++++++++++----
- arch/mips/lantiq/xway/gpio_ebu.c | 3 +-
- arch/mips/lantiq/xway/gpio_stp.c | 3 +-
- 5 files changed, 75 insertions(+), 20 deletions(-)
-
---- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-@@ -126,7 +126,9 @@
- #define LTQ_GPIO0_BASE_ADDR 0x1E100B10
- #define LTQ_GPIO1_BASE_ADDR 0x1E100B40
- #define LTQ_GPIO2_BASE_ADDR 0x1E100B70
-+#define LTQ_GPIO3_BASE_ADDR 0x1E100BA0
- #define LTQ_GPIO_SIZE 0x30
-+#define LTQ_GPIO3_SIZE 0x10
-
- /* SSC */
- #define LTQ_SSC_BASE_ADDR 0x1e100800
---- a/arch/mips/lantiq/xway/devices.c
-+++ b/arch/mips/lantiq/xway/devices.c
-@@ -34,6 +34,7 @@ static struct resource ltq_gpio_resource
- MEM_RES("gpio0", LTQ_GPIO0_BASE_ADDR, LTQ_GPIO_SIZE),
- MEM_RES("gpio1", LTQ_GPIO1_BASE_ADDR, LTQ_GPIO_SIZE),
- MEM_RES("gpio2", LTQ_GPIO2_BASE_ADDR, LTQ_GPIO_SIZE),
-+ MEM_RES("gpio3", LTQ_GPIO3_BASE_ADDR, LTQ_GPIO3_SIZE),
- };
-
- void __init ltq_register_gpio(void)
-@@ -47,6 +48,8 @@ void __init ltq_register_gpio(void)
- if (ltq_is_ar9() || ltq_is_vr9()) {
- platform_device_register_simple("ltq_gpio", 2,
- <q_gpio_resource[2], 1);
-+ platform_device_register_simple("ltq_gpio", 3,
-+ <q_gpio_resource[3], 1);
- }
- }
-
---- a/arch/mips/lantiq/xway/gpio.c
-+++ b/arch/mips/lantiq/xway/gpio.c
-@@ -23,9 +23,17 @@
- #define LTQ_GPIO_OD 0x14
- #define LTQ_GPIO_PUDSEL 0x1C
- #define LTQ_GPIO_PUDEN 0x20
-+#define LTQ_GPIO3_OD 0x24
-+#define LTQ_GPIO3_ALTSEL1 0x24
-+#define LTQ_GPIO3_PUDSEL 0x28
-+#define LTQ_GPIO3_PUDEN 0x2C
-
-+/* PORT3 only has 8 pins and its register layout
-+ is slightly different */
- #define PINS_PER_PORT 16
--#define MAX_PORTS 3
-+#define PINS_PORT3 8
-+#define MAX_PORTS 4
-+#define MAX_PIN 56
-
- #define ltq_gpio_getbit(m, r, p) (!!(ltq_r32(m + r) & (1 << p)))
- #define ltq_gpio_setbit(m, r, p) ltq_w32_mask(0, (1 << p), m + r)
-@@ -55,7 +63,7 @@ int ltq_gpio_request(struct device *dev,
- {
- int id = 0;
-
-- if (pin >= (MAX_PORTS * PINS_PER_PORT))
-+ if (pin >= MAX_PIN)
- return -EINVAL;
- if (devm_gpio_request(dev, pin, name)) {
- pr_err("failed to setup lantiq gpio: %s\n", name);
-@@ -75,12 +83,21 @@ int ltq_gpio_request(struct device *dev,
- else
- ltq_gpio_clearbit(ltq_gpio_port[id].membase,
- LTQ_GPIO_ALTSEL0, pin);
-- if (mux & 0x1)
-- ltq_gpio_setbit(ltq_gpio_port[id].membase,
-- LTQ_GPIO_ALTSEL1, pin);
-- else
-- ltq_gpio_clearbit(ltq_gpio_port[id].membase,
-- LTQ_GPIO_ALTSEL1, pin);
-+ if (id == 3) {
-+ if (mux & 0x1)
-+ ltq_gpio_setbit(ltq_gpio_port[1].membase,
-+ LTQ_GPIO3_ALTSEL1, pin);
-+ else
-+ ltq_gpio_clearbit(ltq_gpio_port[1].membase,
-+ LTQ_GPIO3_ALTSEL1, pin);
-+ } else {
-+ if (mux & 0x1)
-+ ltq_gpio_setbit(ltq_gpio_port[id].membase,
-+ LTQ_GPIO_ALTSEL1, pin);
-+ else
-+ ltq_gpio_clearbit(ltq_gpio_port[id].membase,
-+ LTQ_GPIO_ALTSEL1, pin);
-+ }
- return 0;
- }
- EXPORT_SYMBOL(ltq_gpio_request);
-@@ -106,10 +123,19 @@ static int ltq_gpio_direction_input(stru
- {
- struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
-
-- ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
-+ if (chip->ngpio == PINS_PORT3) {
-+ ltq_gpio_clearbit(ltq_gpio_port[0].membase,
-+ LTQ_GPIO3_OD, offset);
-+ ltq_gpio_setbit(ltq_gpio_port[0].membase,
-+ LTQ_GPIO3_PUDSEL, offset);
-+ ltq_gpio_setbit(ltq_gpio_port[0].membase,
-+ LTQ_GPIO3_PUDEN, offset);
-+ } else {
-+ ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
-+ ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_PUDSEL, offset);
-+ ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_PUDEN, offset);
-+ }
- ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset);
-- ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_PUDSEL, offset);
-- ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_PUDEN, offset);
-
- return 0;
- }
-@@ -119,10 +145,19 @@ static int ltq_gpio_direction_output(str
- {
- struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
-
-- ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
-+ if (chip->ngpio == PINS_PORT3) {
-+ ltq_gpio_setbit(ltq_gpio_port[0].membase,
-+ LTQ_GPIO3_OD, offset);
-+ ltq_gpio_clearbit(ltq_gpio_port[0].membase,
-+ LTQ_GPIO3_PUDSEL, offset);
-+ ltq_gpio_clearbit(ltq_gpio_port[0].membase,
-+ LTQ_GPIO3_PUDEN, offset);
-+ } else {
-+ ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
-+ ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_PUDSEL, offset);
-+ ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_PUDEN, offset);
-+ }
- ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset);
-- ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_PUDSEL, offset);
-- ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_PUDEN, offset);
- ltq_gpio_set(chip, offset, value);
-
- return 0;
-@@ -133,7 +168,11 @@ static int ltq_gpio_req(struct gpio_chip
- struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
-
- ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL0, offset);
-- ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL1, offset);
-+ if (chip->ngpio == PINS_PORT3)
-+ ltq_gpio_clearbit(ltq_gpio_port[1].membase,
-+ LTQ_GPIO3_ALTSEL1, offset);
-+ else
-+ ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL1, offset);
- return 0;
- }
-
-@@ -146,6 +185,16 @@ static int ltq_gpio_probe(struct platfor
- pdev->id);
- return -EINVAL;
- }
-+
-+ /* dirty hack - The registers of port3 are not mapped linearly.
-+ Port 3 may only load if Port 1/2 are mapped */
-+ if ((pdev->id == 3) && (!ltq_gpio_port[1].membase
-+ || !ltq_gpio_port[2].membase)) {
-+ dev_err(&pdev->dev,
-+ "ports 1/2 need to be loaded before port 3 works\n");
-+ return -ENOMEM;
-+ }
-+
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "failed to get memory for gpio port %d\n",
-@@ -175,7 +224,10 @@ static int ltq_gpio_probe(struct platfor
- ltq_gpio_port[pdev->id].chip.set = ltq_gpio_set;
- ltq_gpio_port[pdev->id].chip.request = ltq_gpio_req;
- ltq_gpio_port[pdev->id].chip.base = PINS_PER_PORT * pdev->id;
-- ltq_gpio_port[pdev->id].chip.ngpio = PINS_PER_PORT;
-+ if (pdev->id == 3)
-+ ltq_gpio_port[pdev->id].chip.ngpio = PINS_PORT3;
-+ else
-+ ltq_gpio_port[pdev->id].chip.ngpio = PINS_PER_PORT;
- platform_set_drvdata(pdev, <q_gpio_port[pdev->id]);
- return gpiochip_add(<q_gpio_port[pdev->id].chip);
- }
---- a/arch/mips/lantiq/xway/gpio_ebu.c
-+++ b/arch/mips/lantiq/xway/gpio_ebu.c
-@@ -61,9 +61,8 @@ static struct gpio_chip ltq_ebu_chip = {
- .label = "ltq_ebu",
- .direction_output = ltq_ebu_direction_output,
- .set = ltq_ebu_set,
-- .base = 72,
-+ .base = 100,
- .ngpio = 16,
-- .can_sleep = 1,
- .owner = THIS_MODULE,
- };
-
---- a/arch/mips/lantiq/xway/gpio_stp.c
-+++ b/arch/mips/lantiq/xway/gpio_stp.c
-@@ -74,9 +74,8 @@ static struct gpio_chip ltq_stp_chip = {
- .label = "ltq_stp",
- .direction_output = ltq_stp_direction_output,
- .set = ltq_stp_set,
-- .base = 48,
-+ .base = 200,
- .ngpio = 24,
-- .can_sleep = 1,
- .owner = THIS_MODULE,
- };
-
+++ /dev/null
-From 587ca6b21ab64ab014625b1cacb36ef711c74962 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 29 Sep 2011 20:30:40 +0200
-Subject: [PATCH 57/70] MIPS: lantiq: VPE extensions
-
----
- arch/mips/Kconfig | 22 +++
- arch/mips/include/asm/mipsmtregs.h | 54 +++++++
- arch/mips/kernel/Makefile | 3 +-
- arch/mips/kernel/mips-mt.c | 97 +++++++++++--
- arch/mips/kernel/mtsched_proc.c | 279 ++++++++++++++++++++++++++++++++++++
- arch/mips/kernel/perf_proc.c | 191 ++++++++++++++++++++++++
- arch/mips/kernel/proc.c | 17 +++
- arch/mips/kernel/smtc.c | 7 +
- arch/mips/kernel/vpe.c | 250 ++++++++++++++++++++++++++++++++-
- 9 files changed, 905 insertions(+), 15 deletions(-)
- create mode 100644 arch/mips/kernel/mtsched_proc.c
- create mode 100644 arch/mips/kernel/perf_proc.c
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1909,6 +1909,28 @@ config MIPS_VPE_LOADER
- Includes a loader for loading an elf relocatable object
- onto another VPE and running it.
-
-+config IFX_VPE_EXT
-+ bool "IFX APRP Extensions"
-+ depends on MIPS_VPE_LOADER
-+ default y
-+ help
-+ IFX included extensions in APRP
-+
-+config PERFCTRS
-+ bool "34K Performance counters"
-+ depends on MIPS_MT && PROC_FS
-+ default n
-+ help
-+ 34K Performance counter through /proc
-+
-+config MTSCHED
-+ bool "Support mtsched priority configuration for TCs"
-+ depends on MIPS_MT && PROC_FS
-+ default y
-+ help
-+ Support for mtsched priority configuration for TCs through
-+ /proc/mips/mtsched
-+
- config MIPS_MT_SMTC_IM_BACKSTOP
- bool "Use per-TC register bits as backstop for inhibited IM bits"
- depends on MIPS_MT_SMTC
---- a/arch/mips/include/asm/mipsmtregs.h
-+++ b/arch/mips/include/asm/mipsmtregs.h
-@@ -28,14 +28,34 @@
- #define read_c0_vpeconf0() __read_32bit_c0_register($1, 2)
- #define write_c0_vpeconf0(val) __write_32bit_c0_register($1, 2, val)
-
-+#define read_c0_vpeconf1() __read_32bit_c0_register($1, 3)
-+#define write_c0_vpeconf1(val) __write_32bit_c0_register($1, 3, val)
-+
-+#define read_c0_vpeschedule() __read_32bit_c0_register($1, 5)
-+#define write_c0_vpeschedule(val) __write_32bit_c0_register($1, 5, val)
-+
-+#define read_c0_vpeschefback() __read_32bit_c0_register($1, 6)
-+#define write_c0_vpeschefback(val) __write_32bit_c0_register($1, 6, val)
-+
-+#define read_c0_vpeopt() __read_32bit_c0_register($1, 7)
-+#define write_c0_vpeopt(val) __write_32bit_c0_register($1, 7, val)
-+
- #define read_c0_tcstatus() __read_32bit_c0_register($2, 1)
- #define write_c0_tcstatus(val) __write_32bit_c0_register($2, 1, val)
-
- #define read_c0_tcbind() __read_32bit_c0_register($2, 2)
-+#define write_c0_tcbind(val) __write_32bit_c0_register($2, 2, val)
-
- #define read_c0_tccontext() __read_32bit_c0_register($2, 5)
- #define write_c0_tccontext(val) __write_32bit_c0_register($2, 5, val)
-
-+#define read_c0_tcschedule() __read_32bit_c0_register($2, 6)
-+#define write_c0_tcschedule(val) __write_32bit_c0_register($2, 6, val)
-+
-+#define read_c0_tcschefback() __read_32bit_c0_register($2, 7)
-+#define write_c0_tcschefback(val) __write_32bit_c0_register($2, 7, val)
-+
-+
- #else /* Assembly */
- /*
- * Macros for use in assembly language code
-@@ -74,6 +94,8 @@
- #define MVPCONTROL_STLB_SHIFT 2
- #define MVPCONTROL_STLB (_ULCAST_(1) << MVPCONTROL_STLB_SHIFT)
-
-+#define MVPCONTROL_CPA_SHIFT 3
-+#define MVPCONTROL_CPA (_ULCAST_(1) << MVPCONTROL_CPA_SHIFT)
-
- /* MVPConf0 fields */
- #define MVPCONF0_PTC_SHIFT 0
-@@ -84,6 +106,8 @@
- #define MVPCONF0_TCA ( _ULCAST_(1) << MVPCONF0_TCA_SHIFT)
- #define MVPCONF0_PTLBE_SHIFT 16
- #define MVPCONF0_PTLBE (_ULCAST_(0x3ff) << MVPCONF0_PTLBE_SHIFT)
-+#define MVPCONF0_PCP_SHIFT 27
-+#define MVPCONF0_PCP (_ULCAST_(1) << MVPCONF0_PCP_SHIFT)
- #define MVPCONF0_TLBS_SHIFT 29
- #define MVPCONF0_TLBS (_ULCAST_(1) << MVPCONF0_TLBS_SHIFT)
- #define MVPCONF0_M_SHIFT 31
-@@ -121,9 +145,25 @@
- #define VPECONF0_VPA (_ULCAST_(1) << VPECONF0_VPA_SHIFT)
- #define VPECONF0_MVP_SHIFT 1
- #define VPECONF0_MVP (_ULCAST_(1) << VPECONF0_MVP_SHIFT)
-+#define VPECONF0_ICS_SHIFT 16
-+#define VPECONF0_ICS (_ULCAST_(1) << VPECONF0_ICS_SHIFT)
-+#define VPECONF0_DCS_SHIFT 17
-+#define VPECONF0_DCS (_ULCAST_(1) << VPECONF0_DCS_SHIFT)
- #define VPECONF0_XTC_SHIFT 21
- #define VPECONF0_XTC (_ULCAST_(0xff) << VPECONF0_XTC_SHIFT)
-
-+/* VPEOpt fields */
-+#define VPEOPT_DWX_SHIFT 0
-+#define VPEOPT_IWX_SHIFT 8
-+#define VPEOPT_IWX0 ( _ULCAST_(0x1) << VPEOPT_IWX_SHIFT)
-+#define VPEOPT_IWX1 ( _ULCAST_(0x2) << VPEOPT_IWX_SHIFT)
-+#define VPEOPT_IWX2 ( _ULCAST_(0x4) << VPEOPT_IWX_SHIFT)
-+#define VPEOPT_IWX3 ( _ULCAST_(0x8) << VPEOPT_IWX_SHIFT)
-+#define VPEOPT_DWX0 ( _ULCAST_(0x1) << VPEOPT_DWX_SHIFT)
-+#define VPEOPT_DWX1 ( _ULCAST_(0x2) << VPEOPT_DWX_SHIFT)
-+#define VPEOPT_DWX2 ( _ULCAST_(0x4) << VPEOPT_DWX_SHIFT)
-+#define VPEOPT_DWX3 ( _ULCAST_(0x8) << VPEOPT_DWX_SHIFT)
-+
- /* TCStatus fields (per TC) */
- #define TCSTATUS_TASID (_ULCAST_(0xff))
- #define TCSTATUS_IXMT_SHIFT 10
-@@ -350,6 +390,14 @@ do { \
- #define write_vpe_c0_vpecontrol(val) mttc0(1, 1, val)
- #define read_vpe_c0_vpeconf0() mftc0(1, 2)
- #define write_vpe_c0_vpeconf0(val) mttc0(1, 2, val)
-+#define read_vpe_c0_vpeschedule() mftc0(1, 5)
-+#define write_vpe_c0_vpeschedule(val) mttc0(1, 5, val)
-+#define read_vpe_c0_vpeschefback() mftc0(1, 6)
-+#define write_vpe_c0_vpeschefback(val) mttc0(1, 6, val)
-+#define read_vpe_c0_vpeopt() mftc0(1, 7)
-+#define write_vpe_c0_vpeopt(val) mttc0(1, 7, val)
-+#define read_vpe_c0_wired() mftc0(6, 0)
-+#define write_vpe_c0_wired(val) mttc0(6, 0, val)
- #define read_vpe_c0_count() mftc0(9, 0)
- #define write_vpe_c0_count(val) mttc0(9, 0, val)
- #define read_vpe_c0_status() mftc0(12, 0)
-@@ -381,6 +429,12 @@ do { \
- #define write_tc_c0_tchalt(val) mttc0(2, 4, val)
- #define read_tc_c0_tccontext() mftc0(2, 5)
- #define write_tc_c0_tccontext(val) mttc0(2, 5, val)
-+#define read_tc_c0_tcschedule() mftc0(2, 6)
-+#define write_tc_c0_tcschedule(val) mttc0(2, 6, val)
-+#define read_tc_c0_tcschefback() mftc0(2, 7)
-+#define write_tc_c0_tcschefback(val) mttc0(2, 7, val)
-+#define read_tc_c0_entryhi() mftc0(10, 0)
-+#define write_tc_c0_entryhi(val) mttc0(10, 0, val)
-
- /* GPR */
- #define read_tc_gpr_sp() mftgpr(29)
---- a/arch/mips/kernel/Makefile
-+++ b/arch/mips/kernel/Makefile
-@@ -88,7 +88,8 @@ obj-$(CONFIG_MIPS32_O32) += binfmt_elfo3
-
- obj-$(CONFIG_KGDB) += kgdb.o
- obj-$(CONFIG_PROC_FS) += proc.o
--
-+obj-$(CONFIG_MTSCHED) += mtsched_proc.o
-+obj-$(CONFIG_PERFCTRS) += perf_proc.o
- obj-$(CONFIG_64BIT) += cpu-bugs64.o
-
- obj-$(CONFIG_I8253) += i8253.o
---- a/arch/mips/kernel/mips-mt.c
-+++ b/arch/mips/kernel/mips-mt.c
-@@ -21,26 +21,96 @@
- #include <asm/cacheflush.h>
-
- int vpelimit;
--
- static int __init maxvpes(char *str)
- {
- get_option(&str, &vpelimit);
--
- return 1;
- }
--
- __setup("maxvpes=", maxvpes);
-
- int tclimit;
--
- static int __init maxtcs(char *str)
- {
- get_option(&str, &tclimit);
-+ return 1;
-+}
-+__setup("maxtcs=", maxtcs);
-
-+#ifdef CONFIG_IFX_VPE_EXT
-+int stlb;
-+static int __init istlbshared(char *str)
-+{
-+ get_option(&str, &stlb);
- return 1;
- }
-+__setup("vpe_tlb_shared=", istlbshared);
-
--__setup("maxtcs=", maxtcs);
-+int vpe0_wired;
-+static int __init vpe0wired(char *str)
-+{
-+ get_option(&str, &vpe0_wired);
-+ return 1;
-+}
-+__setup("vpe0_wired_tlb_entries=", vpe0wired);
-+
-+int vpe1_wired;
-+static int __init vpe1wired(char *str)
-+{
-+ get_option(&str, &vpe1_wired);
-+ return 1;
-+}
-+__setup("vpe1_wired_tlb_entries=", vpe1wired);
-+
-+#ifdef CONFIG_MIPS_MT_SMTC
-+extern int nostlb;
-+#endif
-+void configure_tlb(void)
-+{
-+ int vpeflags, tcflags, tlbsiz;
-+ unsigned int config1val;
-+ vpeflags = dvpe();
-+ tcflags = dmt();
-+ write_c0_vpeconf0((read_c0_vpeconf0() | VPECONF0_MVP));
-+ write_c0_mvpcontrol((read_c0_mvpcontrol() | MVPCONTROL_VPC));
-+ mips_ihb();
-+ //printk("stlb = %d, vpe0_wired = %d vpe1_wired=%d\n", stlb,vpe0_wired, vpe1_wired);
-+ if (stlb) {
-+ if (!(read_c0_mvpconf0() & MVPCONF0_TLBS)) {
-+ emt(tcflags);
-+ evpe(vpeflags);
-+ return;
-+ }
-+
-+ write_c0_mvpcontrol(read_c0_mvpcontrol() | MVPCONTROL_STLB);
-+ write_c0_wired(vpe0_wired + vpe1_wired);
-+ if (((read_vpe_c0_config() & MIPS_CONF_MT) >> 7) == 1) {
-+ config1val = read_vpe_c0_config1();
-+ tlbsiz = (((config1val >> 25) & 0x3f) + 1);
-+ if (tlbsiz > 64)
-+ tlbsiz = 64;
-+ cpu_data[0].tlbsize = tlbsiz;
-+ current_cpu_data.tlbsize = tlbsiz;
-+ }
-+
-+ }
-+ else {
-+ write_c0_mvpcontrol(read_c0_mvpcontrol() & ~MVPCONTROL_STLB);
-+ write_c0_wired(vpe0_wired);
-+ }
-+
-+ ehb();
-+ write_c0_mvpcontrol((read_c0_mvpcontrol() & ~MVPCONTROL_VPC));
-+ ehb();
-+ local_flush_tlb_all();
-+
-+ printk("Wired TLB entries for Linux read_c0_wired() = %d\n", read_c0_wired());
-+#ifdef CONFIG_MIPS_MT_SMTC
-+ nostlb = !stlb;
-+#endif
-+ emt(tcflags);
-+ evpe(vpeflags);
-+}
-+#endif
-
- /*
- * Dump new MIPS MT state for the core. Does not leave TCs halted.
-@@ -78,18 +148,18 @@ void mips_mt_regdump(unsigned long mvpct
- if ((read_tc_c0_tcbind() & TCBIND_CURVPE) == i) {
- printk(" VPE %d\n", i);
- printk(" VPEControl : %08lx\n",
-- read_vpe_c0_vpecontrol());
-+ read_vpe_c0_vpecontrol());
- printk(" VPEConf0 : %08lx\n",
-- read_vpe_c0_vpeconf0());
-+ read_vpe_c0_vpeconf0());
- printk(" VPE%d.Status : %08lx\n",
-- i, read_vpe_c0_status());
-+ i, read_vpe_c0_status());
- printk(" VPE%d.EPC : %08lx %pS\n",
-- i, read_vpe_c0_epc(),
-- (void *) read_vpe_c0_epc());
-+ i, read_vpe_c0_epc(),
-+ (void *) read_vpe_c0_epc());
- printk(" VPE%d.Cause : %08lx\n",
-- i, read_vpe_c0_cause());
-+ i, read_vpe_c0_cause());
- printk(" VPE%d.Config7 : %08lx\n",
-- i, read_vpe_c0_config7());
-+ i, read_vpe_c0_config7());
- break; /* Next VPE */
- }
- }
-@@ -287,6 +357,9 @@ void mips_mt_set_cpuoptions(void)
- printk("Mapped %ld ITC cells starting at 0x%08x\n",
- ((itcblkgrn & 0x7fe00000) >> 20), itc_base);
- }
-+#ifdef CONFIG_IFX_VPE_EXT
-+ configure_tlb();
-+#endif
- }
-
- /*
---- /dev/null
-+++ b/arch/mips/kernel/mtsched_proc.c
-@@ -0,0 +1,279 @@
-+/*
-+ * /proc hooks for MIPS MT scheduling policy management for 34K cores
-+ *
-+ * This program is free software; you can distribute it and/or modify it
-+ * under the terms of the GNU General Public License (Version 2) as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2006 Mips Technologies, Inc
-+ */
-+
-+#include <linux/kernel.h>
-+
-+#include <asm/cpu.h>
-+#include <asm/processor.h>
-+#include <asm/system.h>
-+#include <asm/mipsregs.h>
-+#include <asm/mipsmtregs.h>
-+#include <asm/uaccess.h>
-+#include <linux/proc_fs.h>
-+
-+static struct proc_dir_entry *mtsched_proc;
-+
-+#ifndef CONFIG_MIPS_MT_SMTC
-+#define NTCS 2
-+#else
-+#define NTCS NR_CPUS
-+#endif
-+#define NVPES 2
-+
-+int lastvpe = 1;
-+int lasttc = 8;
-+
-+static int proc_read_mtsched(char *page, char **start, off_t off,
-+ int count, int *eof, void *data)
-+{
-+ int totalen = 0;
-+ int len;
-+
-+ int i;
-+ int vpe;
-+ int mytc;
-+ unsigned long flags;
-+ unsigned int mtflags;
-+ unsigned int haltstate;
-+ unsigned int vpes_checked[NVPES];
-+ unsigned int vpeschedule[NVPES];
-+ unsigned int vpeschefback[NVPES];
-+ unsigned int tcschedule[NTCS];
-+ unsigned int tcschefback[NTCS];
-+
-+ /* Dump the state of the MIPS MT scheduling policy manager */
-+ /* Inititalize control state */
-+ for(i = 0; i < NVPES; i++) {
-+ vpes_checked[i] = 0;
-+ vpeschedule[i] = 0;
-+ vpeschefback[i] = 0;
-+ }
-+ for(i = 0; i < NTCS; i++) {
-+ tcschedule[i] = 0;
-+ tcschefback[i] = 0;
-+ }
-+
-+ /* Disable interrupts and multithreaded issue */
-+ local_irq_save(flags);
-+ mtflags = dvpe();
-+
-+ /* Then go through the TCs, halt 'em, and extract the values */
-+ mytc = (read_c0_tcbind() & TCBIND_CURTC) >> TCBIND_CURTC_SHIFT;
-+ for(i = 0; i < NTCS; i++) {
-+ if(i == mytc) {
-+ /* No need to halt ourselves! */
-+ tcschedule[i] = read_c0_tcschedule();
-+ tcschefback[i] = read_c0_tcschefback();
-+ /* If VPE bound to TC hasn't been checked, do it */
-+ vpe = read_c0_tcbind() & TCBIND_CURVPE;
-+ if(!vpes_checked[vpe]) {
-+ vpeschedule[vpe] = read_c0_vpeschedule();
-+ vpeschefback[vpe] = read_c0_vpeschefback();
-+ vpes_checked[vpe] = 1;
-+ }
-+ } else {
-+ settc(i);
-+ haltstate = read_tc_c0_tchalt();
-+ write_tc_c0_tchalt(TCHALT_H);
-+ mips_ihb();
-+ tcschedule[i] = read_tc_c0_tcschedule();
-+ tcschefback[i] = read_tc_c0_tcschefback();
-+ /* If VPE bound to TC hasn't been checked, do it */
-+ vpe = read_tc_c0_tcbind() & TCBIND_CURVPE;
-+ if(!vpes_checked[vpe]) {
-+ vpeschedule[vpe] = read_vpe_c0_vpeschedule();
-+ vpeschefback[vpe] = read_vpe_c0_vpeschefback();
-+ vpes_checked[vpe] = 1;
-+ }
-+ if(!haltstate) write_tc_c0_tchalt(0);
-+ }
-+ }
-+ /* Re-enable MT and interrupts */
-+ evpe(mtflags);
-+ local_irq_restore(flags);
-+
-+ for(vpe=0; vpe < NVPES; vpe++) {
-+ len = sprintf(page, "VPE[%d].VPEschedule = 0x%08x\n",
-+ vpe, vpeschedule[vpe]);
-+ totalen += len;
-+ page += len;
-+ len = sprintf(page, "VPE[%d].VPEschefback = 0x%08x\n",
-+ vpe, vpeschefback[vpe]);
-+ totalen += len;
-+ page += len;
-+ }
-+ for(i=0; i < NTCS; i++) {
-+ len = sprintf(page, "TC[%d].TCschedule = 0x%08x\n",
-+ i, tcschedule[i]);
-+ totalen += len;
-+ page += len;
-+ len = sprintf(page, "TC[%d].TCschefback = 0x%08x\n",
-+ i, tcschefback[i]);
-+ totalen += len;
-+ page += len;
-+ }
-+ return totalen;
-+}
-+
-+/*
-+ * Write to perf counter registers based on text input
-+ */
-+
-+#define TXTBUFSZ 100
-+
-+static int proc_write_mtsched(struct file *file, const char *buffer,
-+ unsigned long count, void *data)
-+{
-+ int len = 0;
-+ char mybuf[TXTBUFSZ];
-+ /* At most, we will set up 9 TCs and 2 VPEs, 11 entries in all */
-+ char entity[1]; //, entity1[1];
-+ int number[1];
-+ unsigned long value[1];
-+ int nparsed = 0 , index = 0;
-+ unsigned long flags;
-+ unsigned int mtflags;
-+ unsigned int haltstate;
-+ unsigned int tcbindval;
-+
-+ if(count >= TXTBUFSZ) len = TXTBUFSZ-1;
-+ else len = count;
-+ memset(mybuf,0,TXTBUFSZ);
-+ if(copy_from_user(mybuf, buffer, len)) return -EFAULT;
-+
-+ nparsed = sscanf(mybuf, "%c%d %lx",
-+ &entity[0] ,&number[0], &value[0]);
-+
-+ /*
-+ * Having acquired the inputs, which might have
-+ * generated exceptions and preemptions,
-+ * program the registers.
-+ */
-+ /* Disable interrupts and multithreaded issue */
-+ local_irq_save(flags);
-+ mtflags = dvpe();
-+
-+ if(entity[index] == 't' ) {
-+ /* Set TCSchedule or TCScheFBack of specified TC */
-+ if(number[index] > NTCS) goto skip;
-+ /* If it's our own TC, do it direct */
-+ if(number[index] ==
-+ ((read_c0_tcbind() & TCBIND_CURTC)
-+ >> TCBIND_CURTC_SHIFT)) {
-+ if(entity[index] == 't')
-+ write_c0_tcschedule(value[index]);
-+ else
-+ write_c0_tcschefback(value[index]);
-+ } else {
-+ /* Otherwise, we do it via MTTR */
-+ settc(number[index]);
-+ haltstate = read_tc_c0_tchalt();
-+ write_tc_c0_tchalt(TCHALT_H);
-+ mips_ihb();
-+ if(entity[index] == 't')
-+ write_tc_c0_tcschedule(value[index]);
-+ else
-+ write_tc_c0_tcschefback(value[index]);
-+ mips_ihb();
-+ if(!haltstate) write_tc_c0_tchalt(0);
-+ }
-+ } else if(entity[index] == 'v') {
-+ /* Set VPESchedule of specified VPE */
-+ if(number[index] > NVPES) goto skip;
-+ tcbindval = read_c0_tcbind();
-+ /* Are we doing this to our current VPE? */
-+ if((tcbindval & TCBIND_CURVPE) == number[index]) {
-+ /* Then life is simple */
-+ write_c0_vpeschedule(value[index]);
-+ } else {
-+ /*
-+ * Bind ourselves to the other VPE long enough
-+ * to program the bind value.
-+ */
-+ write_c0_tcbind((tcbindval & ~TCBIND_CURVPE)
-+ | number[index]);
-+ mips_ihb();
-+ write_c0_vpeschedule(value[index]);
-+ mips_ihb();
-+ /* Restore previous binding */
-+ write_c0_tcbind(tcbindval);
-+ mips_ihb();
-+ }
-+ }
-+
-+ else if(entity[index] == 'r') {
-+ unsigned int vpes_checked[2], vpe ,i , mytc;
-+ vpes_checked[0] = vpes_checked[1] = 0;
-+
-+ /* Then go through the TCs, halt 'em, and extract the values */
-+ mytc = (read_c0_tcbind() & TCBIND_CURTC) >> TCBIND_CURTC_SHIFT;
-+
-+ for(i = 0; i < NTCS; i++) {
-+ if(i == mytc) {
-+ /* No need to halt ourselves! */
-+ write_c0_vpeschefback(0);
-+ write_c0_tcschefback(0);
-+ } else {
-+ settc(i);
-+ haltstate = read_tc_c0_tchalt();
-+ write_tc_c0_tchalt(TCHALT_H);
-+ mips_ihb();
-+ write_tc_c0_tcschefback(0);
-+ /* If VPE bound to TC hasn't been checked, do it */
-+ vpe = read_tc_c0_tcbind() & TCBIND_CURVPE;
-+ if(!vpes_checked[vpe]) {
-+ write_vpe_c0_vpeschefback(0);
-+ vpes_checked[vpe] = 1;
-+ }
-+ if(!haltstate) write_tc_c0_tchalt(0);
-+ }
-+ }
-+ }
-+ else {
-+ printk ("\n Usage : <t/v><0/1> <Hex Value>\n Example : t0 0x01\n");
-+ }
-+
-+skip:
-+ /* Re-enable MT and interrupts */
-+ evpe(mtflags);
-+ local_irq_restore(flags);
-+ return (len);
-+}
-+
-+static int __init init_mtsched_proc(void)
-+{
-+ extern struct proc_dir_entry *get_mips_proc_dir(void);
-+ struct proc_dir_entry *mips_proc_dir;
-+
-+ if (!cpu_has_mipsmt) {
-+ printk("mtsched: not a MIPS MT capable processor\n");
-+ return -ENODEV;
-+ }
-+
-+ mips_proc_dir = get_mips_proc_dir();
-+
-+ mtsched_proc = create_proc_entry("mtsched", 0644, mips_proc_dir);
-+ mtsched_proc->read_proc = proc_read_mtsched;
-+ mtsched_proc->write_proc = proc_write_mtsched;
-+
-+ return 0;
-+}
-+
-+/* Automagically create the entry */
-+module_init(init_mtsched_proc);
---- /dev/null
-+++ b/arch/mips/kernel/perf_proc.c
-@@ -0,0 +1,191 @@
-+/*
-+ * /proc hooks for CPU performance counter support for SMTC kernel
-+ * (and ultimately others)
-+ * Copyright (C) 2006 Mips Technologies, Inc
-+ */
-+
-+#include <linux/kernel.h>
-+
-+#include <asm/cpu.h>
-+#include <asm/processor.h>
-+#include <asm/system.h>
-+#include <asm/mipsregs.h>
-+#include <asm/uaccess.h>
-+#include <linux/proc_fs.h>
-+
-+/*
-+ * /proc diagnostic and statistics hooks
-+ */
-+
-+
-+/* Internal software-extended event counters */
-+
-+static unsigned long long extencount[4] = {0,0,0,0};
-+
-+static struct proc_dir_entry *perf_proc;
-+
-+static int proc_read_perf(char *page, char **start, off_t off,
-+ int count, int *eof, void *data)
-+{
-+ int totalen = 0;
-+ int len;
-+
-+ len = sprintf(page, "PerfCnt[0].Ctl : 0x%08x\n", read_c0_perfctrl0());
-+ totalen += len;
-+ page += len;
-+ len = sprintf(page, "PerfCnt[0].Cnt : %Lu\n",
-+ extencount[0] + (unsigned long long)((unsigned)read_c0_perfcntr0()));
-+ totalen += len;
-+ page += len;
-+ len = sprintf(page, "PerfCnt[1].Ctl : 0x%08x\n", read_c0_perfctrl1());
-+ totalen += len;
-+ page += len;
-+ len = sprintf(page, "PerfCnt[1].Cnt : %Lu\n",
-+ extencount[1] + (unsigned long long)((unsigned)read_c0_perfcntr1()));
-+ totalen += len;
-+ page += len;
-+ len = sprintf(page, "PerfCnt[2].Ctl : 0x%08x\n", read_c0_perfctrl2());
-+ totalen += len;
-+ page += len;
-+ len = sprintf(page, "PerfCnt[2].Cnt : %Lu\n",
-+ extencount[2] + (unsigned long long)((unsigned)read_c0_perfcntr2()));
-+ totalen += len;
-+ page += len;
-+ len = sprintf(page, "PerfCnt[3].Ctl : 0x%08x\n", read_c0_perfctrl3());
-+ totalen += len;
-+ page += len;
-+ len = sprintf(page, "PerfCnt[3].Cnt : %Lu\n",
-+ extencount[3] + (unsigned long long)((unsigned)read_c0_perfcntr3()));
-+ totalen += len;
-+ page += len;
-+
-+ return totalen;
-+}
-+
-+/*
-+ * Write to perf counter registers based on text input
-+ */
-+
-+#define TXTBUFSZ 100
-+
-+static int proc_write_perf(struct file *file, const char *buffer,
-+ unsigned long count, void *data)
-+{
-+ int len;
-+ int nparsed;
-+ int index;
-+ char mybuf[TXTBUFSZ];
-+
-+ int which[4];
-+ unsigned long control[4];
-+ long long ctrdata[4];
-+
-+ if(count >= TXTBUFSZ) len = TXTBUFSZ-1;
-+ else len = count;
-+ memset(mybuf,0,TXTBUFSZ);
-+ if(copy_from_user(mybuf, buffer, len)) return -EFAULT;
-+
-+ nparsed = sscanf(mybuf,
-+ "%d %lx %Ld %d %lx %Ld %d %lx %Ld %d %lx %Ld",
-+ &which[0], &control[0], &ctrdata[0],
-+ &which[1], &control[1], &ctrdata[1],
-+ &which[2], &control[2], &ctrdata[2],
-+ &which[3], &control[3], &ctrdata[3]);
-+
-+ for(index = 0; nparsed >= 3; index++) {
-+ switch (which[index]) {
-+ case 0:
-+ write_c0_perfctrl0(control[index]);
-+ if(ctrdata[index] != -1) {
-+ extencount[0] = (unsigned long long)ctrdata[index];
-+ write_c0_perfcntr0((unsigned long)0);
-+ }
-+ break;
-+ case 1:
-+ write_c0_perfctrl1(control[index]);
-+ if(ctrdata[index] != -1) {
-+ extencount[1] = (unsigned long long)ctrdata[index];
-+ write_c0_perfcntr1((unsigned long)0);
-+ }
-+ break;
-+ case 2:
-+ write_c0_perfctrl2(control[index]);
-+ if(ctrdata[index] != -1) {
-+ extencount[2] = (unsigned long long)ctrdata[index];
-+ write_c0_perfcntr2((unsigned long)0);
-+ }
-+ break;
-+ case 3:
-+ write_c0_perfctrl3(control[index]);
-+ if(ctrdata[index] != -1) {
-+ extencount[3] = (unsigned long long)ctrdata[index];
-+ write_c0_perfcntr3((unsigned long)0);
-+ }
-+ break;
-+ }
-+ nparsed -= 3;
-+ }
-+ return (len);
-+}
-+
-+extern int (*perf_irq)(void);
-+
-+/*
-+ * Invoked when timer interrupt vector picks up a perf counter overflow
-+ */
-+
-+static int perf_proc_irq(void)
-+{
-+ unsigned long snapshot;
-+
-+ /*
-+ * It would be nice to do this as a loop, but we don't have
-+ * indirect access to CP0 registers.
-+ */
-+ snapshot = read_c0_perfcntr0();
-+ if ((long)snapshot < 0) {
-+ extencount[0] +=
-+ (unsigned long long)((unsigned)read_c0_perfcntr0());
-+ write_c0_perfcntr0(0);
-+ }
-+ snapshot = read_c0_perfcntr1();
-+ if ((long)snapshot < 0) {
-+ extencount[1] +=
-+ (unsigned long long)((unsigned)read_c0_perfcntr1());
-+ write_c0_perfcntr1(0);
-+ }
-+ snapshot = read_c0_perfcntr2();
-+ if ((long)snapshot < 0) {
-+ extencount[2] +=
-+ (unsigned long long)((unsigned)read_c0_perfcntr2());
-+ write_c0_perfcntr2(0);
-+ }
-+ snapshot = read_c0_perfcntr3();
-+ if ((long)snapshot < 0) {
-+ extencount[3] +=
-+ (unsigned long long)((unsigned)read_c0_perfcntr3());
-+ write_c0_perfcntr3(0);
-+ }
-+ return 0;
-+}
-+
-+static int __init init_perf_proc(void)
-+{
-+ extern struct proc_dir_entry *get_mips_proc_dir(void);
-+
-+ struct proc_dir_entry *mips_proc_dir = get_mips_proc_dir();
-+
-+ write_c0_perfcntr0(0);
-+ write_c0_perfcntr1(0);
-+ write_c0_perfcntr2(0);
-+ write_c0_perfcntr3(0);
-+ perf_proc = create_proc_entry("perf", 0644, mips_proc_dir);
-+ perf_proc->read_proc = proc_read_perf;
-+ perf_proc->write_proc = proc_write_perf;
-+ perf_irq = perf_proc_irq;
-+
-+ return 0;
-+}
-+
-+/* Automagically create the entry */
-+module_init(init_perf_proc);
---- a/arch/mips/kernel/proc.c
-+++ b/arch/mips/kernel/proc.c
-@@ -7,6 +7,7 @@
- #include <linux/kernel.h>
- #include <linux/sched.h>
- #include <linux/seq_file.h>
-+#include <linux/proc_fs.h>
- #include <asm/bootinfo.h>
- #include <asm/cpu.h>
- #include <asm/cpu-features.h>
-@@ -110,3 +111,19 @@ const struct seq_operations cpuinfo_op =
- .stop = c_stop,
- .show = show_cpuinfo,
- };
-+
-+/*
-+ * Support for MIPS/local /proc hooks in /proc/mips/
-+ */
-+
-+static struct proc_dir_entry *mips_proc = NULL;
-+
-+struct proc_dir_entry *get_mips_proc_dir(void)
-+{
-+ /*
-+ * This ought not to be preemptable.
-+ */
-+ if(mips_proc == NULL)
-+ mips_proc = proc_mkdir("mips", NULL);
-+ return(mips_proc);
-+}
---- a/arch/mips/kernel/smtc.c
-+++ b/arch/mips/kernel/smtc.c
-@@ -1334,6 +1334,13 @@ void smtc_get_new_mmu_context(struct mm_
- asid = asid_cache(cpu);
-
- do {
-+#ifdef CONFIG_IFX_VPE_EXT
-+ /* If TLB is shared between AP and RP (AP is running SMTC),
-+ leave out max ASID i.e., ASID_MASK for RP
-+ */
-+ if (!nostlb && ((asid & ASID_MASK) == (ASID_MASK - 1)))
-+ asid++;
-+#endif
- if (!((asid += ASID_INC) & ASID_MASK) ) {
- if (cpu_has_vtag_icache)
- flush_icache_all();
---- a/arch/mips/kernel/vpe.c
-+++ b/arch/mips/kernel/vpe.c
-@@ -75,6 +75,58 @@ static struct kspd_notifications kspd_ev
- static int kspd_events_reqd;
- #endif
-
-+#ifdef CONFIG_IFX_VPE_EXT
-+static int is_sdepgm;
-+extern int stlb;
-+extern int vpe0_wired;
-+extern int vpe1_wired;
-+unsigned int vpe1_load_addr;
-+
-+static int __init load_address(char *str)
-+{
-+ get_option(&str, &vpe1_load_addr);
-+ return 1;
-+}
-+__setup("vpe1_load_addr=", load_address);
-+
-+#include <asm/mipsmtregs.h>
-+#define write_vpe_c0_wired(val) mttc0(6, 0, val)
-+
-+#ifndef COMMAND_LINE_SIZE
-+# define COMMAND_LINE_SIZE 512
-+#endif
-+
-+char command_line[COMMAND_LINE_SIZE * 2];
-+
-+static unsigned int vpe1_mem;
-+static int __init vpe1mem(char *str)
-+{
-+ vpe1_mem = memparse(str, &str);
-+ return 1;
-+}
-+__setup("vpe1_mem=", vpe1mem);
-+
-+uint32_t vpe1_wdog_ctr;
-+static int __init wdog_ctr(char *str)
-+{
-+ get_option(&str, &vpe1_wdog_ctr);
-+ return 1;
-+}
-+
-+__setup("vpe1_wdog_ctr_addr=", wdog_ctr);
-+EXPORT_SYMBOL(vpe1_wdog_ctr);
-+
-+uint32_t vpe1_wdog_timeout;
-+static int __init wdog_timeout(char *str)
-+{
-+ get_option(&str, &vpe1_wdog_timeout);
-+ return 1;
-+}
-+
-+__setup("vpe1_wdog_timeout=", wdog_timeout);
-+EXPORT_SYMBOL(vpe1_wdog_timeout);
-+
-+#endif
- /* grab the likely amount of memory we will need. */
- #ifdef CONFIG_MIPS_VPE_LOADER_TOM
- #define P_SIZE (2 * 1024 * 1024)
-@@ -267,6 +319,13 @@ static void *alloc_progmem(unsigned long
- void *addr;
-
- #ifdef CONFIG_MIPS_VPE_LOADER_TOM
-+#ifdef CONFIG_IFX_VPE_EXT
-+ if (vpe1_load_addr) {
-+ memset((void *)vpe1_load_addr, 0, len);
-+ return (void *)vpe1_load_addr;
-+ }
-+#endif
-+
- /*
- * This means you must tell Linux to use less memory than you
- * physically have, for example by passing a mem= boot argument.
-@@ -745,6 +804,12 @@ static int vpe_run(struct vpe * v)
- }
-
- /* Write the address we want it to start running from in the TCPC register. */
-+#if defined(CONFIG_IFX_VPE_EXT) && 0
-+ if (stlb)
-+ write_vpe_c0_wired(vpe0_wired + vpe1_wired);
-+ else
-+ write_vpe_c0_wired(vpe1_wired);
-+#endif
- write_tc_c0_tcrestart((unsigned long)v->__start);
- write_tc_c0_tccontext((unsigned long)0);
-
-@@ -758,6 +823,20 @@ static int vpe_run(struct vpe * v)
-
- write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H);
-
-+#if defined(CONFIG_IFX_VPE_EXT) && 0
-+ /*
-+ * $a2 & $a3 are used to pass command line parameters to VPE1. $a2
-+ * points to the start of the command line string and $a3 points to
-+ * the end of the string. This convention is identical to the Linux
-+ * kernel boot parameter passing mechanism. Please note that $a3 is
-+ * used to pass physical memory size or 0 in SDE tool kit. So, if you
-+ * are passing comand line parameters through $a2 & $a3 SDE programs
-+ * don't work as desired.
-+ */
-+ mttgpr(6, command_line);
-+ mttgpr(7, (command_line + strlen(command_line)));
-+ if (is_sdepgm)
-+#endif
- /*
- * The sde-kit passes 'memsize' to __start in $a3, so set something
- * here... Or set $a3 to zero and define DFLT_STACK_SIZE and
-@@ -832,6 +911,9 @@ static int find_vpe_symbols(struct vpe *
- if ( (v->__start == 0) || (v->shared_ptr == NULL))
- return -1;
-
-+#ifdef CONFIG_IFX_VPE_EXT
-+ is_sdepgm = 1;
-+#endif
- return 0;
- }
-
-@@ -993,6 +1075,15 @@ static int vpe_elfload(struct vpe * v)
- (unsigned long)v->load_addr + v->len);
-
- if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) {
-+#ifdef CONFIG_IFX_VPE_EXT
-+ if (vpe1_load_addr) {
-+ /* Conversion to KSEG1 is required ??? */
-+ v->__start = KSEG1ADDR(vpe1_load_addr);
-+ is_sdepgm = 0;
-+ return 0;
-+ }
-+#endif
-+
- if (v->__start == 0) {
- printk(KERN_WARNING "VPE loader: program does not contain "
- "a __start symbol\n");
-@@ -1063,6 +1154,9 @@ static int vpe_open(struct inode *inode,
- struct vpe_notifications *not;
- struct vpe *v;
- int ret;
-+#ifdef CONFIG_IFX_VPE_EXT
-+ int progsize;
-+#endif
-
- if (minor != iminor(inode)) {
- /* assume only 1 device at the moment. */
-@@ -1088,7 +1182,12 @@ static int vpe_open(struct inode *inode,
- release_progmem(v->load_addr);
- cleanup_tc(get_tc(tclimit));
- }
--
-+#ifdef CONFIG_IFX_VPE_EXT
-+ progsize = (vpe1_mem != 0) ? vpe1_mem : P_SIZE;
-+ //printk("progsize = %x\n", progsize);
-+ v->pbuffer = vmalloc(progsize);
-+ v->plen = progsize;
-+#else
- /* this of-course trashes what was there before... */
- v->pbuffer = vmalloc(P_SIZE);
- if (!v->pbuffer) {
-@@ -1096,11 +1195,14 @@ static int vpe_open(struct inode *inode,
- return -ENOMEM;
- }
- v->plen = P_SIZE;
-+#endif
- v->load_addr = NULL;
- v->len = 0;
-
-+#if 0
- v->uid = filp->f_cred->fsuid;
- v->gid = filp->f_cred->fsgid;
-+#endif
-
- #ifdef CONFIG_MIPS_APSP_KSPD
- /* get kspd to tell us when a syscall_exit happens */
-@@ -1348,6 +1450,133 @@ static void kspd_sp_exit( int sp_id)
- cleanup_tc(get_tc(sp_id));
- }
- #endif
-+#ifdef CONFIG_IFX_VPE_EXT
-+int32_t vpe1_sw_start(void* sw_start_addr, uint32_t tcmask, uint32_t flags)
-+{
-+ enum vpe_state state;
-+ struct vpe *v = get_vpe(tclimit);
-+ struct vpe_notifications *not;
-+
-+ if (tcmask || flags) {
-+ printk(KERN_WARNING "Currently tcmask and flags should be 0.\
-+ other values not supported\n");
-+ return -1;
-+ }
-+
-+ state = xchg(&v->state, VPE_STATE_INUSE);
-+ if (state != VPE_STATE_UNUSED) {
-+ vpe_stop(v);
-+
-+ list_for_each_entry(not, &v->notify, list) {
-+ not->stop(tclimit);
-+ }
-+ }
-+
-+ v->__start = (unsigned long)sw_start_addr;
-+ is_sdepgm = 0;
-+
-+ if (!vpe_run(v)) {
-+ printk(KERN_DEBUG "VPE loader: VPE1 running successfully\n");
-+ return 0;
-+ }
-+ return -1;
-+}
-+
-+EXPORT_SYMBOL(vpe1_sw_start);
-+
-+int32_t vpe1_sw_stop(uint32_t flags)
-+{
-+ struct vpe *v = get_vpe(tclimit);
-+
-+ if (!vpe_free(v)) {
-+ printk(KERN_DEBUG "RP Stopped\n");
-+ return 0;
-+ }
-+ else
-+ return -1;
-+}
-+
-+EXPORT_SYMBOL(vpe1_sw_stop);
-+
-+uint32_t vpe1_get_load_addr (uint32_t flags)
-+{
-+ return vpe1_load_addr;
-+}
-+
-+EXPORT_SYMBOL(vpe1_get_load_addr);
-+
-+uint32_t vpe1_get_max_mem (uint32_t flags)
-+{
-+ if (!vpe1_mem)
-+ return P_SIZE;
-+ else
-+ return vpe1_mem;
-+}
-+
-+EXPORT_SYMBOL(vpe1_get_max_mem);
-+
-+void* vpe1_get_cmdline_argument(void)
-+{
-+ return saved_command_line;
-+}
-+
-+EXPORT_SYMBOL(vpe1_get_cmdline_argument);
-+
-+int32_t vpe1_set_boot_param(char *field, char *value, char flags)
-+{
-+ char *ptr, string[64];
-+ int start_off, end_off;
-+ if (!field)
-+ return -1;
-+ strcpy(string, field);
-+ if (value) {
-+ strcat(string, "=");
-+ strcat(string, value);
-+ strcat(command_line, " ");
-+ strcat(command_line, string);
-+ }
-+ else {
-+ ptr = strstr(command_line, string);
-+ if (ptr) {
-+ start_off = ptr - command_line;
-+ ptr += strlen(string);
-+ while ((*ptr != ' ') && (*ptr != '\0'))
-+ ptr++;
-+ end_off = ptr - command_line;
-+ command_line[start_off] = '\0';
-+ strcat (command_line, command_line+end_off);
-+ }
-+ }
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(vpe1_set_boot_param);
-+
-+int32_t vpe1_get_boot_param(char *field, char **value, char flags)
-+{
-+ char *ptr, string[64];
-+ int i = 0;
-+ if (!field)
-+ return -1;
-+ if ((ptr = strstr(command_line, field))) {
-+ ptr += strlen(field) + 1; /* including = */
-+ while ((*ptr != ' ') && (*ptr != '\0'))
-+ string[i++] = *ptr++;
-+ string[i] = '\0';
-+ *value = kmalloc((strlen(string) + 1), GFP_KERNEL);
-+ if (*value != NULL)
-+ strcpy(*value, string);
-+ }
-+ else
-+ *value = NULL;
-+
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(vpe1_get_boot_param);
-+
-+extern void configure_tlb(void);
-+#endif
-
- static ssize_t store_kill(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t len)
-@@ -1429,6 +1658,18 @@ static int __init vpe_module_init(void)
- printk("VPE loader: not a MIPS MT capable processor\n");
- return -ENODEV;
- }
-+#ifdef CONFIG_IFX_VPE_EXT
-+#ifndef CONFIG_MIPS_MT_SMTC
-+ configure_tlb();
-+#endif
-+#endif
-+
-+#ifndef CONFIG_MIPS_MT_SMTC
-+ if (!vpelimit)
-+ vpelimit = 1;
-+ if (!tclimit)
-+ tclimit = 1;
-+#endif
-
- if (vpelimit == 0) {
- printk(KERN_WARNING "No VPEs reserved for AP/SP, not "
-@@ -1473,10 +1714,12 @@ static int __init vpe_module_init(void)
- mtflags = dmt();
- vpflags = dvpe();
-
-+ back_to_back_c0_hazard();
-+
- /* Put MVPE's into 'configuration state' */
- set_c0_mvpcontrol(MVPCONTROL_VPC);
-
-- /* dump_mtregs(); */
-+ dump_mtregs();
-
- val = read_c0_mvpconf0();
- hw_tcs = (val & MVPCONF0_PTC) + 1;
-@@ -1488,6 +1731,7 @@ static int __init vpe_module_init(void)
- * reschedule send IPIs or similar we might hang.
- */
- clear_c0_mvpcontrol(MVPCONTROL_VPC);
-+ back_to_back_c0_hazard();
- evpe(vpflags);
- emt(mtflags);
- local_irq_restore(flags);
-@@ -1513,6 +1757,7 @@ static int __init vpe_module_init(void)
- }
-
- v->ntcs = hw_tcs - tclimit;
-+ write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | 1);
-
- /* add the tc to the list of this vpe's tc's. */
- list_add(&t->tc, &v->tc);
-@@ -1581,6 +1826,7 @@ static int __init vpe_module_init(void)
- out_reenable:
- /* release config state */
- clear_c0_mvpcontrol(MVPCONTROL_VPC);
-+ back_to_back_c0_hazard();
-
- evpe(vpflags);
- emt(mtflags);
--- /dev/null
+From 7ee92edb5569c1cdc676a2635a40b53e8d9d647d Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 29 Sep 2011 21:29:14 +0200
+Subject: [PATCH 57/73] MIPS: lantiq: falcon VPE softdog
+
+---
+ arch/mips/include/asm/mach-lantiq/falcon/vpe.h | 44 ++++++++++
+ arch/mips/lantiq/falcon/softdog_vpe.c | 109 ++++++++++++++++++++++++
+ 2 files changed, 153 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/include/asm/mach-lantiq/falcon/vpe.h
+ create mode 100644 arch/mips/lantiq/falcon/softdog_vpe.c
+
+diff --git a/arch/mips/include/asm/mach-lantiq/falcon/vpe.h b/arch/mips/include/asm/mach-lantiq/falcon/vpe.h
+new file mode 100644
+index 0000000..22a701b
+--- /dev/null
++++ b/arch/mips/include/asm/mach-lantiq/falcon/vpe.h
+@@ -0,0 +1,44 @@
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Copyright (C) 2005 infineon
++ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
++ *
++ */
++#ifndef _IFXMIPS_VPE_H__
++#define _IFXMIPS_VPE_H__
++
++/* For the explanation of the APIs please refer the section "MT APRP Kernel
++ * Programming" in AR9 SW Architecture Specification
++ */
++int32_t vpe1_sw_start(void* sw_start_addr, uint32_t tcmask, uint32_t flags);
++int32_t vpe1_sw_stop(uint32_t flags);
++uint32_t vpe1_get_load_addr (uint32_t flags);
++uint32_t vpe1_get_max_mem (uint32_t flags);
++
++int32_t vpe1_set_boot_param(char *field, char *value, char flags);
++int32_t vpe1_get_boot_param(char *field, char **value, char flags);
++
++/* Watchdog APIs */
++extern unsigned long vpe1_wdog_ctr;
++extern unsigned long vpe1_wdog_timeout;
++
++unsigned long vpe1_sw_wdog_start(unsigned long);
++unsigned long vpe1_sw_wdog_stop(unsigned long);
++
++typedef int (*VPE_SW_WDOG_RESET)(unsigned long wdog_cleared_ok_count);
++int32_t vpe1_sw_wdog_register_reset_handler(VPE_SW_WDOG_RESET reset_fn);
++
++#endif
+diff --git a/arch/mips/lantiq/falcon/softdog_vpe.c b/arch/mips/lantiq/falcon/softdog_vpe.c
+new file mode 100644
+index 0000000..85d22a2
+--- /dev/null
++++ b/arch/mips/lantiq/falcon/softdog_vpe.c
+@@ -0,0 +1,109 @@
++/*
++** =============================================================================
++** FILE NAME : softdog_vpe.c
++** MODULES : LXDB
++** DATE : 24-03-2008
++** AUTHOR : LXDB Team
++** DESCRIPTION : This header file contains the code for the watchdog
++** implentation on vpe1 side.
++** REFERENCES :
++** COPYRIGHT : Copyright (c) 2008
++** Am Campeon 1-12, 85579 Neubiberg, Germany
++** Any use of this software is subject to the conclusion of a respective
++** License agreement. Without such a License agreement no rights to the
++** software are granted
++**
++** HISTORY :
++** $Date $Author $Comment
++** 24-03-2008 LXDB Initial version
++** ============================================================================
++*/
++
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/types.h>
++#include <linux/timer.h>
++#include <linux/reboot.h>
++#include <linux/init.h>
++#include <linux/jiffies.h>
++
++#include <falcon/vpe.h>
++
++static unsigned long last_wdog_value;
++static unsigned long vpe1_wdog_cleared;
++
++static unsigned long vpe1_wdog_dead;
++static void watchdog_vpe0_fire(unsigned long); /* Called when vpe0 timer expires */
++static void keep_alive_vpe0(unsigned long);
++VPE_SW_WDOG_RESET reset_local_fn;
++
++
++static struct timer_list watchdog_vpe0_ticktock =
++ TIMER_INITIALIZER(watchdog_vpe0_fire, 0, 0);
++
++static void watchdog_vpe0_fire (unsigned long flags)
++{
++ volatile unsigned long *wdog_ctr_value;
++ wdog_ctr_value = (void*)vpe1_wdog_ctr;
++ if (*wdog_ctr_value == last_wdog_value) { /* VPE1 watchdog expiry handling */
++ vpe1_sw_wdog_stop(flags);
++ vpe1_wdog_dead++;
++ printk(KERN_DEBUG "VPE1 watchdog reset handler called\n");
++ /* Call the reset handler function */
++ reset_local_fn(flags);
++ } else { /* Everything is OK on vpe1 side. Continue. */
++ last_wdog_value = *wdog_ctr_value;
++ vpe1_wdog_cleared++;
++ keep_alive_vpe0(flags);
++ }
++}
++
++int32_t vpe1_sw_wdog_register_reset_handler (VPE_SW_WDOG_RESET reset_fn)
++{
++ reset_local_fn = (VPE_SW_WDOG_RESET)reset_fn;
++ return 0;
++}
++
++static void keep_alive_vpe0(unsigned long flags)
++{
++ mod_timer(&watchdog_vpe0_ticktock, jiffies+ vpe1_wdog_timeout );
++}
++
++unsigned long vpe1_sw_wdog_start(unsigned long flags)
++{
++ volatile unsigned long *wdog_ctr_value;
++ wdog_ctr_value = (void*)vpe1_wdog_ctr;
++ *wdog_ctr_value = 0;
++ last_wdog_value = 0;
++ keep_alive_vpe0(flags);
++ return 0;
++}
++
++unsigned long vpe1_sw_wdog_stop(unsigned long flags)
++{
++ del_timer(&watchdog_vpe0_ticktock);
++ return 0;
++}
++
++static int __init watchdog_vpe1_init(void)
++{
++ /* Nothing to be done here */
++ return 0;
++}
++
++static void __exit watchdog_vpe1_exit(void)
++{
++ unsigned long flags=0;
++ vpe1_sw_wdog_stop(flags);
++}
++
++module_init(watchdog_vpe1_init);
++module_exit(watchdog_vpe1_exit);
++
++EXPORT_SYMBOL(vpe1_sw_wdog_register_reset_handler);
++EXPORT_SYMBOL(vpe1_sw_wdog_start);
++EXPORT_SYMBOL(vpe1_sw_wdog_stop);
++
++MODULE_AUTHOR("LXDB");
++MODULE_DESCRIPTION("Software Watchdog For VPE1");
++MODULE_LICENSE("GPL");
+--
+1.7.9.1
+
+++ /dev/null
-From 6a76c0c9a33c32464319c24ff5647f7676642c51 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 29 Sep 2011 21:29:14 +0200
-Subject: [PATCH 58/70] MIPS: lantiq: falcon VPE softdog
-
----
- arch/mips/include/asm/mach-lantiq/falcon/vpe.h | 44 ++++++++++
- arch/mips/lantiq/falcon/softdog_vpe.c | 109 ++++++++++++++++++++++++
- 2 files changed, 153 insertions(+), 0 deletions(-)
- create mode 100644 arch/mips/include/asm/mach-lantiq/falcon/vpe.h
- create mode 100644 arch/mips/lantiq/falcon/softdog_vpe.c
-
---- /dev/null
-+++ b/arch/mips/include/asm/mach-lantiq/falcon/vpe.h
-@@ -0,0 +1,44 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * Copyright (C) 2005 infineon
-+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
-+ *
-+ */
-+#ifndef _IFXMIPS_VPE_H__
-+#define _IFXMIPS_VPE_H__
-+
-+/* For the explanation of the APIs please refer the section "MT APRP Kernel
-+ * Programming" in AR9 SW Architecture Specification
-+ */
-+int32_t vpe1_sw_start(void* sw_start_addr, uint32_t tcmask, uint32_t flags);
-+int32_t vpe1_sw_stop(uint32_t flags);
-+uint32_t vpe1_get_load_addr (uint32_t flags);
-+uint32_t vpe1_get_max_mem (uint32_t flags);
-+
-+int32_t vpe1_set_boot_param(char *field, char *value, char flags);
-+int32_t vpe1_get_boot_param(char *field, char **value, char flags);
-+
-+/* Watchdog APIs */
-+extern unsigned long vpe1_wdog_ctr;
-+extern unsigned long vpe1_wdog_timeout;
-+
-+unsigned long vpe1_sw_wdog_start(unsigned long);
-+unsigned long vpe1_sw_wdog_stop(unsigned long);
-+
-+typedef int (*VPE_SW_WDOG_RESET)(unsigned long wdog_cleared_ok_count);
-+int32_t vpe1_sw_wdog_register_reset_handler(VPE_SW_WDOG_RESET reset_fn);
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/lantiq/falcon/softdog_vpe.c
-@@ -0,0 +1,109 @@
-+/*
-+** =============================================================================
-+** FILE NAME : softdog_vpe.c
-+** MODULES : LXDB
-+** DATE : 24-03-2008
-+** AUTHOR : LXDB Team
-+** DESCRIPTION : This header file contains the code for the watchdog
-+** implentation on vpe1 side.
-+** REFERENCES :
-+** COPYRIGHT : Copyright (c) 2008
-+** Am Campeon 1-12, 85579 Neubiberg, Germany
-+** Any use of this software is subject to the conclusion of a respective
-+** License agreement. Without such a License agreement no rights to the
-+** software are granted
-+**
-+** HISTORY :
-+** $Date $Author $Comment
-+** 24-03-2008 LXDB Initial version
-+** ============================================================================
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/types.h>
-+#include <linux/timer.h>
-+#include <linux/reboot.h>
-+#include <linux/init.h>
-+#include <linux/jiffies.h>
-+
-+#include <falcon/vpe.h>
-+
-+static unsigned long last_wdog_value;
-+static unsigned long vpe1_wdog_cleared;
-+
-+static unsigned long vpe1_wdog_dead;
-+static void watchdog_vpe0_fire(unsigned long); /* Called when vpe0 timer expires */
-+static void keep_alive_vpe0(unsigned long);
-+VPE_SW_WDOG_RESET reset_local_fn;
-+
-+
-+static struct timer_list watchdog_vpe0_ticktock =
-+ TIMER_INITIALIZER(watchdog_vpe0_fire, 0, 0);
-+
-+static void watchdog_vpe0_fire (unsigned long flags)
-+{
-+ volatile unsigned long *wdog_ctr_value;
-+ wdog_ctr_value = (void*)vpe1_wdog_ctr;
-+ if (*wdog_ctr_value == last_wdog_value) { /* VPE1 watchdog expiry handling */
-+ vpe1_sw_wdog_stop(flags);
-+ vpe1_wdog_dead++;
-+ printk(KERN_DEBUG "VPE1 watchdog reset handler called\n");
-+ /* Call the reset handler function */
-+ reset_local_fn(flags);
-+ } else { /* Everything is OK on vpe1 side. Continue. */
-+ last_wdog_value = *wdog_ctr_value;
-+ vpe1_wdog_cleared++;
-+ keep_alive_vpe0(flags);
-+ }
-+}
-+
-+int32_t vpe1_sw_wdog_register_reset_handler (VPE_SW_WDOG_RESET reset_fn)
-+{
-+ reset_local_fn = (VPE_SW_WDOG_RESET)reset_fn;
-+ return 0;
-+}
-+
-+static void keep_alive_vpe0(unsigned long flags)
-+{
-+ mod_timer(&watchdog_vpe0_ticktock, jiffies+ vpe1_wdog_timeout );
-+}
-+
-+unsigned long vpe1_sw_wdog_start(unsigned long flags)
-+{
-+ volatile unsigned long *wdog_ctr_value;
-+ wdog_ctr_value = (void*)vpe1_wdog_ctr;
-+ *wdog_ctr_value = 0;
-+ last_wdog_value = 0;
-+ keep_alive_vpe0(flags);
-+ return 0;
-+}
-+
-+unsigned long vpe1_sw_wdog_stop(unsigned long flags)
-+{
-+ del_timer(&watchdog_vpe0_ticktock);
-+ return 0;
-+}
-+
-+static int __init watchdog_vpe1_init(void)
-+{
-+ /* Nothing to be done here */
-+ return 0;
-+}
-+
-+static void __exit watchdog_vpe1_exit(void)
-+{
-+ unsigned long flags=0;
-+ vpe1_sw_wdog_stop(flags);
-+}
-+
-+module_init(watchdog_vpe1_init);
-+module_exit(watchdog_vpe1_exit);
-+
-+EXPORT_SYMBOL(vpe1_sw_wdog_register_reset_handler);
-+EXPORT_SYMBOL(vpe1_sw_wdog_start);
-+EXPORT_SYMBOL(vpe1_sw_wdog_stop);
-+
-+MODULE_AUTHOR("LXDB");
-+MODULE_DESCRIPTION("Software Watchdog For VPE1");
-+MODULE_LICENSE("GPL");
--- /dev/null
+From 8bf74990542ad73bc633332f716a5edc76f858a2 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 29 Sep 2011 20:29:54 +0200
+Subject: [PATCH 58/73] MIPS: lantiq: udp in-kernel redirect
+
+---
+ include/linux/udp_redirect.h | 57 +++++++++++++
+ net/Kconfig | 6 ++
+ net/ipv4/Makefile | 3 +
+ net/ipv4/udp.c | 28 ++++++-
+ net/ipv4/udp_redirect_symb.c | 186 ++++++++++++++++++++++++++++++++++++++++++
+ 5 files changed, 276 insertions(+), 4 deletions(-)
+ create mode 100644 include/linux/udp_redirect.h
+ create mode 100644 net/ipv4/udp_redirect_symb.c
+
+diff --git a/include/linux/udp_redirect.h b/include/linux/udp_redirect.h
+new file mode 100644
+index 0000000..de1e64f
+--- /dev/null
++++ b/include/linux/udp_redirect.h
+@@ -0,0 +1,57 @@
++#ifndef _UDP_REDIRECT_H
++#define _UDP_REDIRECT_H
++
++/******************************************************************************
++
++ Copyright (c) 2006
++ Infineon Technologies AG
++ Am Campeon 1-12; 81726 Munich, Germany
++
++ THE DELIVERY OF THIS SOFTWARE AS WELL AS THE HEREBY GRANTED NON-EXCLUSIVE,
++ WORLDWIDE LICENSE TO USE, COPY, MODIFY, DISTRIBUTE AND SUBLICENSE THIS
++ SOFTWARE IS FREE OF CHARGE.
++
++ THE LICENSED SOFTWARE IS PROVIDED "AS IS" AND INFINEON EXPRESSLY DISCLAIMS
++ ALL REPRESENTATIONS AND WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING
++ WITHOUT LIMITATION, WARRANTIES OR REPRESENTATIONS OF WORKMANSHIP,
++ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, DURABILITY, THAT THE
++ OPERATING OF THE LICENSED SOFTWARE WILL BE ERROR FREE OR FREE OF ANY THIRD
++ PARTY CLAIMS, INCLUDING WITHOUT LIMITATION CLAIMS OF THIRD PARTY INTELLECTUAL
++ PROPERTY INFRINGEMENT.
++
++ EXCEPT FOR ANY LIABILITY DUE TO WILFUL ACTS OR GROSS NEGLIGENCE AND EXCEPT
++ FOR ANY PERSONAL INJURY INFINEON SHALL IN NO EVENT BE LIABLE FOR ANY CLAIM
++ OR DAMAGES OF ANY KIND, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
++ ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
++ DEALINGS IN THE SOFTWARE.
++
++******************************************************************************/
++
++/* ============================= */
++/* Includes */
++/* ============================= */
++#ifndef _LINUX_TYPES_H
++#include <linux/types.h>
++#endif
++
++
++/* ============================= */
++/* Definitions */
++/* ============================= */
++#define UDP_REDIRECT_MAGIC (void*)0x55445052L
++
++
++/* ============================= */
++/* Global variable declaration */
++/* ============================= */
++extern int (*udp_do_redirect_fn)(struct sock *sk, struct sk_buff *skb);
++extern int (*udpredirect_getfrag_fn)(void *p, char * to,
++ int offset, int fraglen, int odd,
++ struct sk_buff *skb);
++/* ============================= */
++/* Global function declaration */
++/* ============================= */
++
++extern int udpredirect_getfrag(void *p, char * to, int offset,
++ int fraglen, int odd, struct sk_buff *skb);
++#endif
+diff --git a/net/Kconfig b/net/Kconfig
+index a073148..d13e3fa 100644
+--- a/net/Kconfig
++++ b/net/Kconfig
+@@ -72,6 +72,12 @@ config INET
+
+ Short answer: say Y.
+
++config IFX_UDP_REDIRECT
++ bool "IFX Kernel Packet Interface for UDP redirection"
++ help
++ You can say Y here if you want to use hooks from kernel for
++ UDP redirection.
++
+ if INET
+ source "net/ipv4/Kconfig"
+ source "net/ipv6/Kconfig"
+diff --git a/net/ipv4/Makefile b/net/ipv4/Makefile
+index f2dc69c..6badd72 100644
+--- a/net/ipv4/Makefile
++++ b/net/ipv4/Makefile
+@@ -14,6 +14,9 @@ obj-y := route.o inetpeer.o protocol.o \
+ inet_fragment.o ping.o
+
+ obj-$(CONFIG_SYSCTL) += sysctl_net_ipv4.o
++ifneq ($(CONFIG_IFX_UDP_REDIRECT),)
++obj-$(CONFIG_IFX_UDP_REDIRECT) += udp_redirect_symb.o
++endif
+ obj-$(CONFIG_PROC_FS) += proc.o
+ obj-$(CONFIG_IP_MULTIPLE_TABLES) += fib_rules.o
+ obj-$(CONFIG_IP_MROUTE) += ipmr.o
+diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
+index 5a65eea..cdfa0d4 100644
+--- a/net/ipv4/udp.c
++++ b/net/ipv4/udp.c
+@@ -108,6 +108,10 @@
+ #include <trace/events/udp.h>
+ #include "udp_impl.h"
+
++#if defined(CONFIG_IFX_UDP_REDIRECT) || defined(CONFIG_IFX_UDP_REDIRECT_MODULE)
++#include <linux/udp_redirect.h>
++#endif
++
+ struct udp_table udp_table __read_mostly;
+ EXPORT_SYMBOL(udp_table);
+
+@@ -803,7 +807,7 @@ int udp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
+ u8 tos;
+ int err, is_udplite = IS_UDPLITE(sk);
+ int corkreq = up->corkflag || msg->msg_flags&MSG_MORE;
+- int (*getfrag)(void *, char *, int, int, int, struct sk_buff *);
++ int (*getfrag)(void *, char *, int, int, int, struct sk_buff *) = NULL;
+ struct sk_buff *skb;
+ struct ip_options_data opt_copy;
+
+@@ -820,7 +824,13 @@ int udp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
+ ipc.opt = NULL;
+ ipc.tx_flags = 0;
+
+- getfrag = is_udplite ? udplite_getfrag : ip_generic_getfrag;
++/* UDPREDIRECT */
++#if defined(CONFIG_IFX_UDP_REDIRECT) || defined(CONFIG_IFX_UDP_REDIRECT_MODULE)
++ if(udpredirect_getfrag_fn && sk->sk_user_data == UDP_REDIRECT_MAGIC)
++ getfrag = udpredirect_getfrag_fn;
++ else
++#endif /* IFX_UDP_REDIRECT */
++ getfrag = is_udplite ? udplite_getfrag : ip_generic_getfrag;
+
+ fl4 = &inet->cork.fl.u.ip4;
+ if (up->pending) {
+@@ -1623,6 +1633,7 @@ int __udp4_lib_rcv(struct sk_buff *skb, struct udp_table *udptable,
+ struct rtable *rt = skb_rtable(skb);
+ __be32 saddr, daddr;
+ struct net *net = dev_net(skb->dev);
++ int ret = 0;
+
+ /*
+ * Validate the packet.
+@@ -1655,7 +1666,16 @@ int __udp4_lib_rcv(struct sk_buff *skb, struct udp_table *udptable,
+ sk = __udp4_lib_lookup_skb(skb, uh->source, uh->dest, udptable);
+
+ if (sk != NULL) {
+- int ret = udp_queue_rcv_skb(sk, skb);
++ /* UDPREDIRECT */
++#if defined(CONFIG_IFX_UDP_REDIRECT) || defined(CONFIG_IFX_UDP_REDIRECT_MODULE)
++ if(udp_do_redirect_fn && sk->sk_user_data == UDP_REDIRECT_MAGIC)
++ {
++ udp_do_redirect_fn(sk,skb);
++ kfree_skb(skb);
++ return(0);
++ }
++#endif
++ ret = udp_queue_rcv_skb(sk, skb);
+ sock_put(sk);
+
+ /* a return value > 0 means to resubmit the input, but
+@@ -1952,7 +1972,7 @@ struct proto udp_prot = {
+ .clear_sk = sk_prot_clear_portaddr_nulls,
+ };
+ EXPORT_SYMBOL(udp_prot);
+-
++EXPORT_SYMBOL(udp_rcv);
+ /* ------------------------------------------------------------------------ */
+ #ifdef CONFIG_PROC_FS
+
+diff --git a/net/ipv4/udp_redirect_symb.c b/net/ipv4/udp_redirect_symb.c
+new file mode 100644
+index 0000000..5617e86
+--- /dev/null
++++ b/net/ipv4/udp_redirect_symb.c
+@@ -0,0 +1,186 @@
++/******************************************************************************
++
++ Copyright (c) 2006
++ Infineon Technologies AG
++ Am Campeon 1-12; 81726 Munich, Germany
++
++ THE DELIVERY OF THIS SOFTWARE AS WELL AS THE HEREBY GRANTED NON-EXCLUSIVE,
++ WORLDWIDE LICENSE TO USE, COPY, MODIFY, DISTRIBUTE AND SUBLICENSE THIS
++ SOFTWARE IS FREE OF CHARGE.
++
++ THE LICENSED SOFTWARE IS PROVIDED "AS IS" AND INFINEON EXPRESSLY DISCLAIMS
++ ALL REPRESENTATIONS AND WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING
++ WITHOUT LIMITATION, WARRANTIES OR REPRESENTATIONS OF WORKMANSHIP,
++ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, DURABILITY, THAT THE
++ OPERATING OF THE LICENSED SOFTWARE WILL BE ERROR FREE OR FREE OF ANY THIRD
++ PARTY CLAIMS, INCLUDING WITHOUT LIMITATION CLAIMS OF THIRD PARTY INTELLECTUAL
++ PROPERTY INFRINGEMENT.
++
++ EXCEPT FOR ANY LIABILITY DUE TO WILFUL ACTS OR GROSS NEGLIGENCE AND EXCEPT
++ FOR ANY PERSONAL INJURY INFINEON SHALL IN NO EVENT BE LIABLE FOR ANY CLAIM
++ OR DAMAGES OF ANY KIND, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
++ ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
++ DEALINGS IN THE SOFTWARE.
++
++******************************************************************************/
++#if defined(CONFIG_IFX_UDP_REDIRECT) || defined(CONFIG_IFX_UDP_REDIRECT_MODULE)
++/* ============================= */
++/* Includes */
++/* ============================= */
++#include <net/checksum.h>
++#include <net/udp.h>
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/udp_redirect.h>
++
++/* ============================= */
++/* Global variable definition */
++/* ============================= */
++int (*udpredirect_getfrag_fn) (void *p, char * to, int offset,
++ int fraglen, int odd, struct sk_buff *skb) = NULL;
++int (*udp_do_redirect_fn)(struct sock *sk, struct sk_buff *skb) = NULL;
++
++/* ============================= */
++/* Local type definitions */
++/* ============================= */
++struct udpfakehdr
++{
++ struct udphdr uh;
++ u32 saddr;
++ u32 daddr;
++ struct iovec *iov;
++ u32 wcheck;
++};
++
++/* ============================= */
++/* Local function declaration */
++/* ============================= */
++static int udpredirect_csum_partial_copy_fromiovecend(unsigned char *kdata,
++ struct iovec *iov, int offset, unsigned int len, __wsum *csump);
++
++static int udpredirect_memcpy_fromiovecend(unsigned char *kdata, struct iovec *iov, int offset,
++ int len);
++
++/* ============================= */
++/* Global function definition */
++/* ============================= */
++
++/*
++ Copy of udp_getfrag() from udp.c
++ This function exists because no copy_from_user() is needed for udpredirect.
++*/
++
++int
++udpredirect_getfrag(void *from, char *to, int offset, int len, int odd, struct sk_buff *skb)
++{
++ struct iovec *iov = from;
++
++ if (skb->ip_summed == CHECKSUM_PARTIAL) {
++ if (udpredirect_memcpy_fromiovecend(to, iov, offset, len) < 0)
++ return -EFAULT;
++ } else {
++ __wsum csum = 0;
++ if (udpredirect_csum_partial_copy_fromiovecend(to, iov, offset, len, &csum) < 0)
++ return -EFAULT;
++ skb->csum = csum_block_add(skb->csum, csum, odd);
++ }
++ return 0;
++}
++
++static int udpredirect_memcpy_fromiovecend(unsigned char *kdata, struct iovec *iov, int offset,
++ int len)
++{
++ /* Skip over the finished iovecs */
++ while (offset >= iov->iov_len) {
++ offset -= iov->iov_len;
++ iov++;
++ }
++
++ while (len > 0) {
++ u8 __user *base = iov->iov_base + offset;
++ int copy = min_t(unsigned int, len, iov->iov_len - offset);
++
++ offset = 0;
++ memcpy(kdata, base, copy);
++ len -= copy;
++ kdata += copy;
++ iov++;
++ }
++
++ return 0;
++}
++
++/*
++ Copy of csum_partial_copy_fromiovecend() from iovec.c
++ This function exists because no copy_from_user() is needed for udpredirect.
++*/
++
++int udpredirect_csum_partial_copy_fromiovecend(unsigned char *kdata, struct iovec *iov,
++ int offset, unsigned int len, __wsum *csump)
++{
++ __wsum csum = *csump;
++ int partial_cnt = 0, err = 0;
++
++ /* Skip over the finished iovecs */
++ while (offset >= iov->iov_len) {
++ offset -= iov->iov_len;
++ iov++;
++ }
++
++ while (len > 0) {
++ u8 __user *base = iov->iov_base + offset;
++ int copy = min_t(unsigned int, len, iov->iov_len - offset);
++
++ offset = 0;
++
++ /* There is a remnant from previous iov. */
++ if (partial_cnt) {
++ int par_len = 4 - partial_cnt;
++
++ /* iov component is too short ... */
++ if (par_len > copy) {
++ memcpy(kdata, base, copy);
++ kdata += copy;
++ base += copy;
++ partial_cnt += copy;
++ len -= copy;
++ iov++;
++ if (len)
++ continue;
++ *csump = csum_partial(kdata - partial_cnt,
++ partial_cnt, csum);
++ goto out;
++ }
++ memcpy(kdata, base, par_len);
++ csum = csum_partial(kdata - partial_cnt, 4, csum);
++ kdata += par_len;
++ base += par_len;
++ copy -= par_len;
++ len -= par_len;
++ partial_cnt = 0;
++ }
++
++ if (len > copy) {
++ partial_cnt = copy % 4;
++ if (partial_cnt) {
++ copy -= partial_cnt;
++ memcpy(kdata + copy, base + copy, partial_cnt);
++ }
++ }
++
++ if (copy) {
++ csum = csum_partial_copy_nocheck(base, kdata, copy, csum);
++ }
++ len -= copy + partial_cnt;
++ kdata += copy + partial_cnt;
++ iov++;
++ }
++ *csump = csum;
++out:
++ return err;
++}
++
++EXPORT_SYMBOL(udpredirect_getfrag);
++EXPORT_SYMBOL(udp_do_redirect_fn);
++EXPORT_SYMBOL(udpredirect_getfrag_fn);
++#endif /* CONFIG_IFX_UDP_REDIRECT* */
+--
+1.7.9.1
+
--- /dev/null
+From bd865269f0a339d575ac9f0b768d1168b9865f85 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 29 Sep 2011 20:31:54 +0200
+Subject: [PATCH 59/73] MIPS: lantiq: cache split
+
+---
+ arch/mips/Kconfig | 22 ++++++
+ arch/mips/kernel/vpe.c | 66 ++++++++++++++++++
+ arch/mips/mm/c-r4k.c | 172 ++++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 260 insertions(+), 0 deletions(-)
+
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index 902aedb..12ee3df 100644
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -1904,6 +1904,28 @@ config IFX_VPE_EXT
+ help
+ IFX included extensions in APRP
+
++config IFX_VPE_CACHE_SPLIT
++ bool "IFX Cache Split Ways"
++ depends on IFX_VPE_EXT
++ help
++ IFX extension for reserving (splitting) cache ways among VPEs. You must
++ give kernel command line arguments vpe_icache_shared=0 or
++ vpe_dcache_shared=0 to enable splitting of icache or dcache
++ respectively. Then you can specify which cache ways should be
++ assigned to which VPE. There are total 8 cache ways, 4 each
++ for dcache and icache: dcache_way0, dcache_way1,dcache_way2,
++ dcache_way3 and icache_way0,icache_way1, icache_way2,icache_way3.
++
++ For example, if you specify vpe_icache_shared=0 and icache_way2=1,
++ then the 3rd icache way will be assigned to VPE0 and denied in VPE1.
++
++ For icache, software is required to make at least one cache way available
++ for a VPE at all times i.e., one can't assign all the icache ways to one
++ VPE.
++
++ By default, vpe_dcache_shared and vpe_icache_shared are set to 1
++ (i.e., both icache and dcache are shared among VPEs)
++
+ config PERFCTRS
+ bool "34K Performance counters"
+ depends on MIPS_MT && PROC_FS
+diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
+index e338ba5..0511d11 100644
+--- a/arch/mips/kernel/vpe.c
++++ b/arch/mips/kernel/vpe.c
+@@ -127,6 +127,13 @@ __setup("vpe1_wdog_timeout=", wdog_timeout);
+ EXPORT_SYMBOL(vpe1_wdog_timeout);
+
+ #endif
++
++#ifdef CONFIG_IFX_VPE_CACHE_SPLIT /* Code for splitting the cache ways among VPEs. */
++extern int vpe_icache_shared,vpe_dcache_shared;
++extern int icache_way0,icache_way1,icache_way2,icache_way3;
++extern int dcache_way0,dcache_way1,dcache_way2,dcache_way3;
++#endif
++
+ /* grab the likely amount of memory we will need. */
+ #ifdef CONFIG_MIPS_VPE_LOADER_TOM
+ #define P_SIZE (2 * 1024 * 1024)
+@@ -865,6 +872,65 @@ static int vpe_run(struct vpe * v)
+ /* enable this VPE */
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
+
++#ifdef CONFIG_IFX_VPE_CACHE_SPLIT
++ if ( (!vpe_icache_shared) || (!vpe_dcache_shared) ) {
++
++ /* PCP bit must be 1 to split the cache */
++ if(read_c0_mvpconf0() & MVPCONF0_PCP) {
++
++ if ( !vpe_icache_shared ){
++ write_vpe_c0_vpeconf0((read_vpe_c0_vpeconf0()) & ~VPECONF0_ICS);
++
++ /*
++ * If any cache way is 1, then that way is denied
++ * in VPE1. Otherwise assign that way to VPE1.
++ */
++ if (!icache_way0)
++ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_IWX0 );
++ else
++ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_IWX0 );
++ if (!icache_way1)
++ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_IWX1 );
++ else
++ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_IWX1 );
++ if (!icache_way2)
++ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_IWX2 );
++ else
++ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_IWX2 );
++ if (!icache_way3)
++ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_IWX3 );
++ else
++ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_IWX3 );
++ }
++
++ if ( !vpe_dcache_shared ) {
++ write_vpe_c0_vpeconf0((read_vpe_c0_vpeconf0()) & ~VPECONF0_DCS);
++
++ /*
++ * If any cache way is 1, then that way is denied
++ * in VPE1. Otherwise assign that way to VPE1.
++ */
++ if (!dcache_way0)
++ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_DWX0 );
++ else
++ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_DWX0 );
++ if (!dcache_way1)
++ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_DWX1 );
++ else
++ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_DWX1 );
++ if (!dcache_way2)
++ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_DWX2 );
++ else
++ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_DWX2 );
++ if (!dcache_way3)
++ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_DWX3 );
++ else
++ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_DWX3 );
++ }
++ }
++ }
++#endif /* endif CONFIG_IFX_VPE_CACHE_SPLIT */
++
+ /* clear out any left overs from a previous program */
+ write_vpe_c0_status(0);
+ write_vpe_c0_cause(0);
+diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
+index a79fe9a..94cb24f 100644
+--- a/arch/mips/mm/c-r4k.c
++++ b/arch/mips/mm/c-r4k.c
+@@ -1383,6 +1383,106 @@ static int __init setcoherentio(char *str)
+ __setup("coherentio", setcoherentio);
+ #endif
+
++#ifdef CONFIG_IFX_VPE_CACHE_SPLIT /* Code for splitting the cache ways among VPEs. */
++
++#include <asm/mipsmtregs.h>
++
++/*
++ * By default, vpe_icache_shared and vpe_dcache_shared
++ * values are 1 i.e., both icache and dcache are shared
++ * among the VPEs.
++ */
++
++int vpe_icache_shared = 1;
++static int __init vpe_icache_shared_val(char *str)
++{
++ get_option(&str, &vpe_icache_shared);
++ return 1;
++}
++__setup("vpe_icache_shared=", vpe_icache_shared_val);
++EXPORT_SYMBOL(vpe_icache_shared);
++
++int vpe_dcache_shared = 1;
++static int __init vpe_dcache_shared_val(char *str)
++{
++ get_option(&str, &vpe_dcache_shared);
++ return 1;
++}
++__setup("vpe_dcache_shared=", vpe_dcache_shared_val);
++EXPORT_SYMBOL(vpe_dcache_shared);
++
++/*
++ * Software is required to make atleast one icache
++ * way available for a VPE at all times i.e., one
++ * can't assign all the icache ways to one VPE.
++ */
++
++int icache_way0 = 0;
++static int __init icache_way0_val(char *str)
++{
++ get_option(&str, &icache_way0);
++ return 1;
++}
++__setup("icache_way0=", icache_way0_val);
++
++int icache_way1 = 0;
++static int __init icache_way1_val(char *str)
++{
++ get_option(&str, &icache_way1);
++ return 1;
++}
++__setup("icache_way1=", icache_way1_val);
++
++int icache_way2 = 0;
++static int __init icache_way2_val(char *str)
++{
++ get_option(&str, &icache_way2);
++ return 1;
++}
++__setup("icache_way2=", icache_way2_val);
++
++int icache_way3 = 0;
++static int __init icache_way3_val(char *str)
++{
++ get_option(&str, &icache_way3);
++ return 1;
++}
++__setup("icache_way3=", icache_way3_val);
++
++int dcache_way0 = 0;
++static int __init dcache_way0_val(char *str)
++{
++ get_option(&str, &dcache_way0);
++ return 1;
++}
++__setup("dcache_way0=", dcache_way0_val);
++
++int dcache_way1 = 0;
++static int __init dcache_way1_val(char *str)
++{
++ get_option(&str, &dcache_way1);
++ return 1;
++}
++__setup("dcache_way1=", dcache_way1_val);
++
++int dcache_way2 = 0;
++static int __init dcache_way2_val(char *str)
++{
++ get_option(&str, &dcache_way2);
++ return 1;
++}
++__setup("dcache_way2=", dcache_way2_val);
++
++int dcache_way3 = 0;
++static int __init dcache_way3_val(char *str)
++{
++ get_option(&str, &dcache_way3);
++ return 1;
++}
++__setup("dcache_way3=", dcache_way3_val);
++
++#endif /* endif CONFIG_IFX_VPE_CACHE_SPLIT */
++
+ void __cpuinit r4k_cache_init(void)
+ {
+ extern void build_clear_page(void);
+@@ -1402,6 +1502,78 @@ void __cpuinit r4k_cache_init(void)
+ break;
+ }
+
++#ifdef CONFIG_IFX_VPE_CACHE_SPLIT
++ /*
++ * We split the cache ways appropriately among the VPEs
++ * based on cache ways values we received as command line
++ * arguments
++ */
++ if ( (!vpe_icache_shared) || (!vpe_dcache_shared) ){
++
++ /* PCP bit must be 1 to split the cache */
++ if(read_c0_mvpconf0() & MVPCONF0_PCP) {
++
++ /* Set CPA bit which enables us to modify VPEOpt register */
++ write_c0_mvpcontrol((read_c0_mvpcontrol()) | MVPCONTROL_CPA);
++
++ if ( !vpe_icache_shared ){
++ write_c0_vpeconf0((read_c0_vpeconf0()) & ~VPECONF0_ICS);
++ /*
++ * If any cache way is 1, then that way is denied
++ * in VPE0. Otherwise assign that way to VPE0.
++ */
++ printk(KERN_DEBUG "icache is split\n");
++ printk(KERN_DEBUG "icache_way0=%d icache_way1=%d icache_way2=%d icache_way3=%d\n",
++ icache_way0, icache_way1,icache_way2, icache_way3);
++ if (icache_way0)
++ write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_IWX0 );
++ else
++ write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_IWX0 );
++ if (icache_way1)
++ write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_IWX1 );
++ else
++ write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_IWX1 );
++ if (icache_way2)
++ write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_IWX2 );
++ else
++ write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_IWX2 );
++ if (icache_way3)
++ write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_IWX3 );
++ else
++ write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_IWX3 );
++ }
++
++ if ( !vpe_dcache_shared ) {
++ /*
++ * If any cache way is 1, then that way is denied
++ * in VPE0. Otherwise assign that way to VPE0.
++ */
++ printk(KERN_DEBUG "dcache is split\n");
++ printk(KERN_DEBUG "dcache_way0=%d dcache_way1=%d dcache_way2=%d dcache_way3=%d\n",
++ dcache_way0, dcache_way1, dcache_way2, dcache_way3);
++ write_c0_vpeconf0((read_c0_vpeconf0()) & ~VPECONF0_DCS);
++ if (dcache_way0)
++ write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_DWX0 );
++ else
++ write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_DWX0 );
++ if (dcache_way1)
++ write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_DWX1 );
++ else
++ write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_DWX1 );
++ if (dcache_way2)
++ write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_DWX2 );
++ else
++ write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_DWX2 );
++ if (dcache_way3)
++ write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_DWX3 );
++ else
++ write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_DWX3 );
++ }
++ }
++ }
++
++#endif /* endif CONFIG_IFX_VPE_CACHE_SPLIT */
++
+ probe_pcache();
+ setup_scache();
+
+--
+1.7.9.1
+
+++ /dev/null
-From 268b631d81d5428cdf1a82b9655e9f44f64a8238 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 29 Sep 2011 20:29:54 +0200
-Subject: [PATCH 59/70] MIPS: lantiq: udp in-kernel redirect
-
----
- include/linux/udp_redirect.h | 57 +++++++++++++
- net/Kconfig | 6 ++
- net/ipv4/Makefile | 3 +
- net/ipv4/udp.c | 28 ++++++-
- net/ipv4/udp_redirect_symb.c | 186 ++++++++++++++++++++++++++++++++++++++++++
- 5 files changed, 276 insertions(+), 4 deletions(-)
- create mode 100644 include/linux/udp_redirect.h
- create mode 100644 net/ipv4/udp_redirect_symb.c
-
---- /dev/null
-+++ b/include/linux/udp_redirect.h
-@@ -0,0 +1,57 @@
-+#ifndef _UDP_REDIRECT_H
-+#define _UDP_REDIRECT_H
-+
-+/******************************************************************************
-+
-+ Copyright (c) 2006
-+ Infineon Technologies AG
-+ Am Campeon 1-12; 81726 Munich, Germany
-+
-+ THE DELIVERY OF THIS SOFTWARE AS WELL AS THE HEREBY GRANTED NON-EXCLUSIVE,
-+ WORLDWIDE LICENSE TO USE, COPY, MODIFY, DISTRIBUTE AND SUBLICENSE THIS
-+ SOFTWARE IS FREE OF CHARGE.
-+
-+ THE LICENSED SOFTWARE IS PROVIDED "AS IS" AND INFINEON EXPRESSLY DISCLAIMS
-+ ALL REPRESENTATIONS AND WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING
-+ WITHOUT LIMITATION, WARRANTIES OR REPRESENTATIONS OF WORKMANSHIP,
-+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, DURABILITY, THAT THE
-+ OPERATING OF THE LICENSED SOFTWARE WILL BE ERROR FREE OR FREE OF ANY THIRD
-+ PARTY CLAIMS, INCLUDING WITHOUT LIMITATION CLAIMS OF THIRD PARTY INTELLECTUAL
-+ PROPERTY INFRINGEMENT.
-+
-+ EXCEPT FOR ANY LIABILITY DUE TO WILFUL ACTS OR GROSS NEGLIGENCE AND EXCEPT
-+ FOR ANY PERSONAL INJURY INFINEON SHALL IN NO EVENT BE LIABLE FOR ANY CLAIM
-+ OR DAMAGES OF ANY KIND, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-+ ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
-+ DEALINGS IN THE SOFTWARE.
-+
-+******************************************************************************/
-+
-+/* ============================= */
-+/* Includes */
-+/* ============================= */
-+#ifndef _LINUX_TYPES_H
-+#include <linux/types.h>
-+#endif
-+
-+
-+/* ============================= */
-+/* Definitions */
-+/* ============================= */
-+#define UDP_REDIRECT_MAGIC (void*)0x55445052L
-+
-+
-+/* ============================= */
-+/* Global variable declaration */
-+/* ============================= */
-+extern int (*udp_do_redirect_fn)(struct sock *sk, struct sk_buff *skb);
-+extern int (*udpredirect_getfrag_fn)(void *p, char * to,
-+ int offset, int fraglen, int odd,
-+ struct sk_buff *skb);
-+/* ============================= */
-+/* Global function declaration */
-+/* ============================= */
-+
-+extern int udpredirect_getfrag(void *p, char * to, int offset,
-+ int fraglen, int odd, struct sk_buff *skb);
-+#endif
---- a/net/Kconfig
-+++ b/net/Kconfig
-@@ -72,6 +72,12 @@ config INET
-
- Short answer: say Y.
-
-+config IFX_UDP_REDIRECT
-+ bool "IFX Kernel Packet Interface for UDP redirection"
-+ help
-+ You can say Y here if you want to use hooks from kernel for
-+ UDP redirection.
-+
- if INET
- source "net/ipv4/Kconfig"
- source "net/ipv6/Kconfig"
---- a/net/ipv4/Makefile
-+++ b/net/ipv4/Makefile
-@@ -14,6 +14,9 @@ obj-y := route.o inetpeer.o protocol
- inet_fragment.o ping.o
-
- obj-$(CONFIG_SYSCTL) += sysctl_net_ipv4.o
-+ifneq ($(CONFIG_IFX_UDP_REDIRECT),)
-+obj-$(CONFIG_IFX_UDP_REDIRECT) += udp_redirect_symb.o
-+endif
- obj-$(CONFIG_PROC_FS) += proc.o
- obj-$(CONFIG_IP_MULTIPLE_TABLES) += fib_rules.o
- obj-$(CONFIG_IP_MROUTE) += ipmr.o
---- a/net/ipv4/udp.c
-+++ b/net/ipv4/udp.c
-@@ -108,6 +108,10 @@
- #include <trace/events/udp.h>
- #include "udp_impl.h"
-
-+#if defined(CONFIG_IFX_UDP_REDIRECT) || defined(CONFIG_IFX_UDP_REDIRECT_MODULE)
-+#include <linux/udp_redirect.h>
-+#endif
-+
- struct udp_table udp_table __read_mostly;
- EXPORT_SYMBOL(udp_table);
-
-@@ -803,7 +807,7 @@ int udp_sendmsg(struct kiocb *iocb, stru
- u8 tos;
- int err, is_udplite = IS_UDPLITE(sk);
- int corkreq = up->corkflag || msg->msg_flags&MSG_MORE;
-- int (*getfrag)(void *, char *, int, int, int, struct sk_buff *);
-+ int (*getfrag)(void *, char *, int, int, int, struct sk_buff *) = NULL;
- struct sk_buff *skb;
- struct ip_options_data opt_copy;
-
-@@ -820,7 +824,13 @@ int udp_sendmsg(struct kiocb *iocb, stru
- ipc.opt = NULL;
- ipc.tx_flags = 0;
-
-- getfrag = is_udplite ? udplite_getfrag : ip_generic_getfrag;
-+/* UDPREDIRECT */
-+#if defined(CONFIG_IFX_UDP_REDIRECT) || defined(CONFIG_IFX_UDP_REDIRECT_MODULE)
-+ if(udpredirect_getfrag_fn && sk->sk_user_data == UDP_REDIRECT_MAGIC)
-+ getfrag = udpredirect_getfrag_fn;
-+ else
-+#endif /* IFX_UDP_REDIRECT */
-+ getfrag = is_udplite ? udplite_getfrag : ip_generic_getfrag;
-
- fl4 = &inet->cork.fl.u.ip4;
- if (up->pending) {
-@@ -1623,6 +1633,7 @@ int __udp4_lib_rcv(struct sk_buff *skb,
- struct rtable *rt = skb_rtable(skb);
- __be32 saddr, daddr;
- struct net *net = dev_net(skb->dev);
-+ int ret = 0;
-
- /*
- * Validate the packet.
-@@ -1655,7 +1666,16 @@ int __udp4_lib_rcv(struct sk_buff *skb,
- sk = __udp4_lib_lookup_skb(skb, uh->source, uh->dest, udptable);
-
- if (sk != NULL) {
-- int ret = udp_queue_rcv_skb(sk, skb);
-+ /* UDPREDIRECT */
-+#if defined(CONFIG_IFX_UDP_REDIRECT) || defined(CONFIG_IFX_UDP_REDIRECT_MODULE)
-+ if(udp_do_redirect_fn && sk->sk_user_data == UDP_REDIRECT_MAGIC)
-+ {
-+ udp_do_redirect_fn(sk,skb);
-+ kfree_skb(skb);
-+ return(0);
-+ }
-+#endif
-+ ret = udp_queue_rcv_skb(sk, skb);
- sock_put(sk);
-
- /* a return value > 0 means to resubmit the input, but
-@@ -1952,7 +1972,7 @@ struct proto udp_prot = {
- .clear_sk = sk_prot_clear_portaddr_nulls,
- };
- EXPORT_SYMBOL(udp_prot);
--
-+EXPORT_SYMBOL(udp_rcv);
- /* ------------------------------------------------------------------------ */
- #ifdef CONFIG_PROC_FS
-
---- /dev/null
-+++ b/net/ipv4/udp_redirect_symb.c
-@@ -0,0 +1,186 @@
-+/******************************************************************************
-+
-+ Copyright (c) 2006
-+ Infineon Technologies AG
-+ Am Campeon 1-12; 81726 Munich, Germany
-+
-+ THE DELIVERY OF THIS SOFTWARE AS WELL AS THE HEREBY GRANTED NON-EXCLUSIVE,
-+ WORLDWIDE LICENSE TO USE, COPY, MODIFY, DISTRIBUTE AND SUBLICENSE THIS
-+ SOFTWARE IS FREE OF CHARGE.
-+
-+ THE LICENSED SOFTWARE IS PROVIDED "AS IS" AND INFINEON EXPRESSLY DISCLAIMS
-+ ALL REPRESENTATIONS AND WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING
-+ WITHOUT LIMITATION, WARRANTIES OR REPRESENTATIONS OF WORKMANSHIP,
-+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, DURABILITY, THAT THE
-+ OPERATING OF THE LICENSED SOFTWARE WILL BE ERROR FREE OR FREE OF ANY THIRD
-+ PARTY CLAIMS, INCLUDING WITHOUT LIMITATION CLAIMS OF THIRD PARTY INTELLECTUAL
-+ PROPERTY INFRINGEMENT.
-+
-+ EXCEPT FOR ANY LIABILITY DUE TO WILFUL ACTS OR GROSS NEGLIGENCE AND EXCEPT
-+ FOR ANY PERSONAL INJURY INFINEON SHALL IN NO EVENT BE LIABLE FOR ANY CLAIM
-+ OR DAMAGES OF ANY KIND, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-+ ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
-+ DEALINGS IN THE SOFTWARE.
-+
-+******************************************************************************/
-+#if defined(CONFIG_IFX_UDP_REDIRECT) || defined(CONFIG_IFX_UDP_REDIRECT_MODULE)
-+/* ============================= */
-+/* Includes */
-+/* ============================= */
-+#include <net/checksum.h>
-+#include <net/udp.h>
-+#include <linux/module.h>
-+#include <linux/skbuff.h>
-+#include <linux/udp_redirect.h>
-+
-+/* ============================= */
-+/* Global variable definition */
-+/* ============================= */
-+int (*udpredirect_getfrag_fn) (void *p, char * to, int offset,
-+ int fraglen, int odd, struct sk_buff *skb) = NULL;
-+int (*udp_do_redirect_fn)(struct sock *sk, struct sk_buff *skb) = NULL;
-+
-+/* ============================= */
-+/* Local type definitions */
-+/* ============================= */
-+struct udpfakehdr
-+{
-+ struct udphdr uh;
-+ u32 saddr;
-+ u32 daddr;
-+ struct iovec *iov;
-+ u32 wcheck;
-+};
-+
-+/* ============================= */
-+/* Local function declaration */
-+/* ============================= */
-+static int udpredirect_csum_partial_copy_fromiovecend(unsigned char *kdata,
-+ struct iovec *iov, int offset, unsigned int len, __wsum *csump);
-+
-+static int udpredirect_memcpy_fromiovecend(unsigned char *kdata, struct iovec *iov, int offset,
-+ int len);
-+
-+/* ============================= */
-+/* Global function definition */
-+/* ============================= */
-+
-+/*
-+ Copy of udp_getfrag() from udp.c
-+ This function exists because no copy_from_user() is needed for udpredirect.
-+*/
-+
-+int
-+udpredirect_getfrag(void *from, char *to, int offset, int len, int odd, struct sk_buff *skb)
-+{
-+ struct iovec *iov = from;
-+
-+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
-+ if (udpredirect_memcpy_fromiovecend(to, iov, offset, len) < 0)
-+ return -EFAULT;
-+ } else {
-+ __wsum csum = 0;
-+ if (udpredirect_csum_partial_copy_fromiovecend(to, iov, offset, len, &csum) < 0)
-+ return -EFAULT;
-+ skb->csum = csum_block_add(skb->csum, csum, odd);
-+ }
-+ return 0;
-+}
-+
-+static int udpredirect_memcpy_fromiovecend(unsigned char *kdata, struct iovec *iov, int offset,
-+ int len)
-+{
-+ /* Skip over the finished iovecs */
-+ while (offset >= iov->iov_len) {
-+ offset -= iov->iov_len;
-+ iov++;
-+ }
-+
-+ while (len > 0) {
-+ u8 __user *base = iov->iov_base + offset;
-+ int copy = min_t(unsigned int, len, iov->iov_len - offset);
-+
-+ offset = 0;
-+ memcpy(kdata, base, copy);
-+ len -= copy;
-+ kdata += copy;
-+ iov++;
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ Copy of csum_partial_copy_fromiovecend() from iovec.c
-+ This function exists because no copy_from_user() is needed for udpredirect.
-+*/
-+
-+int udpredirect_csum_partial_copy_fromiovecend(unsigned char *kdata, struct iovec *iov,
-+ int offset, unsigned int len, __wsum *csump)
-+{
-+ __wsum csum = *csump;
-+ int partial_cnt = 0, err = 0;
-+
-+ /* Skip over the finished iovecs */
-+ while (offset >= iov->iov_len) {
-+ offset -= iov->iov_len;
-+ iov++;
-+ }
-+
-+ while (len > 0) {
-+ u8 __user *base = iov->iov_base + offset;
-+ int copy = min_t(unsigned int, len, iov->iov_len - offset);
-+
-+ offset = 0;
-+
-+ /* There is a remnant from previous iov. */
-+ if (partial_cnt) {
-+ int par_len = 4 - partial_cnt;
-+
-+ /* iov component is too short ... */
-+ if (par_len > copy) {
-+ memcpy(kdata, base, copy);
-+ kdata += copy;
-+ base += copy;
-+ partial_cnt += copy;
-+ len -= copy;
-+ iov++;
-+ if (len)
-+ continue;
-+ *csump = csum_partial(kdata - partial_cnt,
-+ partial_cnt, csum);
-+ goto out;
-+ }
-+ memcpy(kdata, base, par_len);
-+ csum = csum_partial(kdata - partial_cnt, 4, csum);
-+ kdata += par_len;
-+ base += par_len;
-+ copy -= par_len;
-+ len -= par_len;
-+ partial_cnt = 0;
-+ }
-+
-+ if (len > copy) {
-+ partial_cnt = copy % 4;
-+ if (partial_cnt) {
-+ copy -= partial_cnt;
-+ memcpy(kdata + copy, base + copy, partial_cnt);
-+ }
-+ }
-+
-+ if (copy) {
-+ csum = csum_partial_copy_nocheck(base, kdata, copy, csum);
-+ }
-+ len -= copy + partial_cnt;
-+ kdata += copy + partial_cnt;
-+ iov++;
-+ }
-+ *csump = csum;
-+out:
-+ return err;
-+}
-+
-+EXPORT_SYMBOL(udpredirect_getfrag);
-+EXPORT_SYMBOL(udp_do_redirect_fn);
-+EXPORT_SYMBOL(udpredirect_getfrag_fn);
-+#endif /* CONFIG_IFX_UDP_REDIRECT* */
--- /dev/null
+From 720f8d0381c60af85f049353464a12fbed903edb Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 20 Mar 2012 08:26:04 +0100
+Subject: [PATCH 60/73] MIPS: clean up clock code
+
+---
+ arch/mips/lantiq/clk.c | 11 +++
+ arch/mips/lantiq/clk.h | 3 +-
+ arch/mips/lantiq/xway/devices.c | 2 +-
+ arch/mips/lantiq/xway/sysctrl.c | 166 ++++++++++++++++++++++++++++++---------
+ 4 files changed, 143 insertions(+), 39 deletions(-)
+
+diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c
+index 84a201e..5494b6e 100644
+--- a/arch/mips/lantiq/clk.c
++++ b/arch/mips/lantiq/clk.c
+@@ -44,6 +44,7 @@ struct clk *clk_get_fpi(void)
+ {
+ return &cpu_clk_generic[1];
+ }
++EXPORT_SYMBOL_GPL(clk_get_fpi);
+
+ struct clk *clk_get_io(void)
+ {
+@@ -70,6 +71,16 @@ unsigned long clk_get_rate(struct clk *clk)
+ }
+ EXPORT_SYMBOL(clk_get_rate);
+
++int clk_set_rate(struct clk *clk, unsigned long rate)
++{
++ if (unlikely(!clk_good(clk)))
++ return 0;
++
++ clk->rate = rate;
++ return 0;
++}
++EXPORT_SYMBOL(clk_set_rate);
++
+ int clk_enable(struct clk *clk)
+ {
+ if (unlikely(!clk_good(clk)))
+diff --git a/arch/mips/lantiq/clk.h b/arch/mips/lantiq/clk.h
+index d047768..b34e675 100644
+--- a/arch/mips/lantiq/clk.h
++++ b/arch/mips/lantiq/clk.h
+@@ -12,6 +12,7 @@
+ #include <linux/clkdev.h>
+
+ /* clock speeds */
++#define CLOCK_33M 33333333
+ #define CLOCK_60M 60000000
+ #define CLOCK_62_5M 62500000
+ #define CLOCK_83M 83333333
+@@ -38,9 +39,9 @@
+ struct clk {
+ struct clk_lookup cl;
+ unsigned long rate;
+- unsigned long (*get_rate) (void);
+ unsigned int module;
+ unsigned int bits;
++ unsigned long (*get_rate) (void);
+ int (*enable) (struct clk *clk);
+ void (*disable) (struct clk *clk);
+ int (*activate) (struct clk *clk);
+diff --git a/arch/mips/lantiq/xway/devices.c b/arch/mips/lantiq/xway/devices.c
+index e6d45bc..5d4650d 100644
+--- a/arch/mips/lantiq/xway/devices.c
++++ b/arch/mips/lantiq/xway/devices.c
+@@ -59,7 +59,7 @@ static struct resource ltq_stp_resource =
+
+ void __init ltq_register_gpio_stp(void)
+ {
+- platform_device_register_simple("ltq_stp", 0, <q_stp_resource, 1);
++ platform_device_register_simple("ltq_stp", -1, <q_stp_resource, 1);
+ }
+
+ /* asc ports - amazon se has its own serial mapping */
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+index ac7383f..9df048c 100644
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -16,40 +16,57 @@
+ #include "../devices.h"
+
+ /* clock control register */
+-#define LTQ_CGU_IFCCR 0x0018
++#define CGU_IFCCR 0x0018
+ /* system clock register */
+-#define LTQ_CGU_SYS 0x0010
+-
+-/* the enable / disable registers */
+-#define LTQ_PMU_PWDCR 0x1C
+-#define LTQ_PMU_PWDSR 0x20
+-#define LTQ_PMU_PWDCR1 0x24
+-#define LTQ_PMU_PWDSR1 0x28
+-
+-#define PWDCR(x) ((x) ? (LTQ_PMU_PWDCR1) : (LTQ_PMU_PWDCR))
+-#define PWDSR(x) ((x) ? (LTQ_PMU_PWDSR1) : (LTQ_PMU_PWDSR))
+-
+-/* CGU - clock generation unit */
+-#define CGU_EPHY 0x10
++#define CGU_SYS 0x0010
++/* pci control register */
++#define CGU_PCICR 0x0034
++/* ephy configuration register */
++#define CGU_EPHY 0x10
++/* power control register */
++#define PMU_PWDCR 0x1C
++/* power status register */
++#define PMU_PWDSR 0x20
++/* power control register */
++#define PMU_PWDCR1 0x24
++/* power status register */
++#define PMU_PWDSR1 0x28
++/* power control register */
++#define PWDCR(x) ((x) ? (PMU_PWDCR1) : (PMU_PWDCR))
++/* power status register */
++#define PWDSR(x) ((x) ? (PMU_PWDSR1) : (PMU_PWDSR))
+
+ /* PMU - power management unit */
+-#define PMU_DMA 0x0020
+-#define PMU_SPI 0x0100
+-#define PMU_EPHY 0x0080
+-#define PMU_USB 0x8041
+-#define PMU_STP 0x0800
+-#define PMU_GPT 0x1000
+-#define PMU_PPE 0x2000
+-#define PMU_FPI 0x4000
+-#define PMU_SWITCH 0x10000000
+-#define PMU_AHBS 0x2000
+-#define PMU_AHBM 0x8000
+-#define PMU_PCIE_CLK 0x80000000
+-
+-#define PMU1_PCIE_PHY 0x0001
+-#define PMU1_PCIE_CTL 0x0002
+-#define PMU1_PCIE_MSI 0x0020
+-#define PMU1_PCIE_PDI 0x0010
++#define PMU_USB0_P BIT(0)
++#define PMU_PCI BIT(4)
++#define PMU_DMA BIT(5)
++#define PMU_USB0 BIT(5)
++#define PMU_SPI BIT(8)
++#define PMU_EPHY BIT(7)
++#define PMU_EBU BIT(10)
++#define PMU_STP BIT(11)
++#define PMU_GPT BIT(12)
++#define PMU_PPE BIT(13)
++#define PMU_AHBS BIT(13) /* vr9 */
++#define PMU_FPI BIT(14)
++#define PMU_AHBM BIT(15)
++#define PMU_PPE_QSB BIT(18)
++#define PMU_PPE_SLL01 BIT(19)
++#define PMU_PPE_TC BIT(21)
++#define PMU_PPE_EMA BIT(22)
++#define PMU_PPE_DPLUM BIT(23)
++#define PMU_PPE_DPLUS BIT(24)
++#define PMU_USB1_P BIT(26)
++#define PMU_USB1 BIT(27)
++#define PMU_SWITCH BIT(28)
++#define PMU_PPE_TOP BIT(29)
++#define PMU_GPHY BIT(30)
++#define PMU_PCIE_CLK BIT(31)
++
++#define PMU1_PCIE_PHY BIT(0)
++#define PMU1_PCIE_CTL BIT(1)
++#define PMU1_PCIE_PDI BIT(4)
++#define PMU1_PCIE_MSI BIT(5)
+
+ #define ltq_pmu_w32(x, y) ltq_w32((x), ltq_pmu_membase + (y))
+ #define ltq_pmu_r32(x) ltq_r32(ltq_pmu_membase + (x))
+@@ -69,13 +86,13 @@ static void __iomem *ltq_pmu_membase;
+
+ static int ltq_cgu_enable(struct clk *clk)
+ {
+- ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | clk->bits, LTQ_CGU_IFCCR);
++ ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) | clk->bits, CGU_IFCCR);
+ return 0;
+ }
+
+ static void ltq_cgu_disable(struct clk *clk)
+ {
+- ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~clk->bits, LTQ_CGU_IFCCR);
++ ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) & ~clk->bits, CGU_IFCCR);
+ }
+
+ static int ltq_pmu_enable(struct clk *clk)
+@@ -94,9 +111,49 @@ static int ltq_pmu_enable(struct clk *clk)
+
+ static void ltq_pmu_disable(struct clk *clk)
+ {
+- ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) | clk->bits, LTQ_PMU_PWDCR);
++ ltq_pmu_w32(ltq_pmu_r32(PWDCR(clk->module)) | clk->bits,
++ PWDCR(clk->module));
++}
++
++static int ltq_pci_enable(struct clk *clk)
++{
++ unsigned int ifccr = ltq_cgu_r32(CGU_IFCCR);
++ /* set clock bus speed */
++ if (ltq_is_ar9()) {
++ ifccr &= ~0x1f00000;
++ if (clk->rate == CLOCK_33M)
++ ifccr |= 0xe00000;
++ else
++ ifccr |= 0x700000; /* 62.5M */
++ } else {
++ ifccr &= ~0xf00000;
++ if (clk->rate == CLOCK_33M)
++ ifccr |= 0x800000;
++ else
++ ifccr |= 0x400000; /* 62.5M */
++ }
++ ltq_cgu_w32(ifccr, CGU_IFCCR);
++ return 0;
++}
++
++static int ltq_pci_ext_enable(struct clk *clk)
++{
++ /* enable external pci clock */
++ ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) & ~(1 << 16),
++ CGU_IFCCR);
++ ltq_cgu_w32((1 << 30), CGU_PCICR);
++ return 0;
++}
++
++static void ltq_pci_ext_disable(struct clk *clk)
++{
++ /* enable external pci clock */
++ ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) | (1 << 16),
++ CGU_IFCCR);
++ ltq_cgu_w32((1 << 31) | (1 << 30), CGU_PCICR);
+ }
+
++/* manage the clock gates via PMU */
+ static inline void clkdev_add_pmu(const char *dev, const char *con,
+ unsigned int module, unsigned int bits)
+ {
+@@ -112,6 +169,7 @@ static inline void clkdev_add_pmu(const char *dev, const char *con,
+ clkdev_add(&clk->cl);
+ }
+
++/* manage the clock generator */
+ static inline void clkdev_add_cgu(const char *dev, const char *con,
+ unsigned int bits)
+ {
+@@ -126,6 +184,33 @@ static inline void clkdev_add_cgu(const char *dev, const char *con,
+ clkdev_add(&clk->cl);
+ }
+
++/* pci needs its own enable function */
++static inline void clkdev_add_pci(void)
++{
++ struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
++ struct clk *clk_ext = kzalloc(sizeof(struct clk), GFP_KERNEL);
++
++ /* main pci clock */
++ clk->cl.dev_id = "ltq_pci";
++ clk->cl.con_id = NULL;
++ clk->cl.clk = clk;
++ clk->rate = CLOCK_33M;
++ clk->enable = ltq_pci_enable;
++ clk->disable = ltq_pmu_disable;
++ clk->module = 0;
++ clk->bits = PMU_PCI;
++ clkdev_add(&clk->cl);
++
++ /* use internal/external bus clock */
++ clk_ext->cl.dev_id = "ltq_pci";
++ clk_ext->cl.con_id = "external";
++ clk_ext->cl.clk = clk_ext;
++ clk_ext->enable = ltq_pci_ext_enable;
++ clk_ext->disable = ltq_pci_ext_disable;
++ clkdev_add(&clk_ext->cl);
++
++}
++
+ void __init ltq_soc_init(void)
+ {
+ ltq_pmu_membase = ltq_remap_resource(<q_pmu_resource);
+@@ -144,14 +229,16 @@ void __init ltq_soc_init(void)
+ ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0);
+
+ /* add our clocks */
++ clkdev_add_pmu("ltq_fpi", NULL, 0, PMU_FPI);
+ clkdev_add_pmu("ltq_dma", NULL, 0, PMU_DMA);
+ clkdev_add_pmu("ltq_stp", NULL, 0, PMU_STP);
+ clkdev_add_pmu("ltq_spi", NULL, 0, PMU_SPI);
+ clkdev_add_pmu("ltq_gptu", NULL, 0, PMU_GPT);
++ clkdev_add_pmu("ltq_ebu", NULL, 0, PMU_EBU);
+ if (!ltq_is_vr9())
+ clkdev_add_pmu("ltq_etop", NULL, 0, PMU_PPE);
+ if (ltq_is_ase()) {
+- if (ltq_cgu_r32(LTQ_CGU_SYS) & (1 << 5))
++ if (ltq_cgu_r32(CGU_SYS) & (1 << 5))
+ clkdev_add_static(CLOCK_266M, CLOCK_133M, CLOCK_133M);
+ else
+ clkdev_add_static(CLOCK_133M, CLOCK_133M, CLOCK_133M);
+@@ -166,11 +253,16 @@ void __init ltq_soc_init(void)
+ clkdev_add_pmu("ltq_pcie", "pdi", 1, PMU1_PCIE_PDI);
+ clkdev_add_pmu("ltq_pcie", "ctl", 1, PMU1_PCIE_CTL);
+ clkdev_add_pmu("ltq_pcie", "ahb", 0, PMU_AHBM | PMU_AHBS);
+- clkdev_add_pmu("usb0", NULL, 0, (1<<6) | 1);
+- clkdev_add_pmu("usb1", NULL, 0, (1<<26) | (1<<27));
++ clkdev_add_pmu("usb0", NULL, 0, PMU_USB0 | PMU_USB0_P);
++ clkdev_add_pmu("usb1", NULL, 0, PMU_USB1 | PMU_USB1_P);
++ clkdev_add_pmu("ltq_vrx200", NULL, 0,
++ PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
++ PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
++ PMU_PPE_QSB);
+ } else {
+ clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
+ ltq_danube_io_region_clock());
++ clkdev_add_pci();
+ if (ltq_is_ar9())
+ clkdev_add_pmu("ltq_etop", "switch", 0, PMU_SWITCH);
+ }
+--
+1.7.9.1
+
+++ /dev/null
-From 307ba9e4d8fb0608566aacf88ab8cded5e20e005 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 29 Sep 2011 20:31:54 +0200
-Subject: [PATCH 60/70] MIPS: lantiq: cache split
-
----
- arch/mips/Kconfig | 22 ++++++
- arch/mips/kernel/vpe.c | 66 ++++++++++++++++++
- arch/mips/mm/c-r4k.c | 172 ++++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 260 insertions(+), 0 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1916,6 +1916,28 @@ config IFX_VPE_EXT
- help
- IFX included extensions in APRP
-
-+config IFX_VPE_CACHE_SPLIT
-+ bool "IFX Cache Split Ways"
-+ depends on IFX_VPE_EXT
-+ help
-+ IFX extension for reserving (splitting) cache ways among VPEs. You must
-+ give kernel command line arguments vpe_icache_shared=0 or
-+ vpe_dcache_shared=0 to enable splitting of icache or dcache
-+ respectively. Then you can specify which cache ways should be
-+ assigned to which VPE. There are total 8 cache ways, 4 each
-+ for dcache and icache: dcache_way0, dcache_way1,dcache_way2,
-+ dcache_way3 and icache_way0,icache_way1, icache_way2,icache_way3.
-+
-+ For example, if you specify vpe_icache_shared=0 and icache_way2=1,
-+ then the 3rd icache way will be assigned to VPE0 and denied in VPE1.
-+
-+ For icache, software is required to make at least one cache way available
-+ for a VPE at all times i.e., one can't assign all the icache ways to one
-+ VPE.
-+
-+ By default, vpe_dcache_shared and vpe_icache_shared are set to 1
-+ (i.e., both icache and dcache are shared among VPEs)
-+
- config PERFCTRS
- bool "34K Performance counters"
- depends on MIPS_MT && PROC_FS
---- a/arch/mips/kernel/vpe.c
-+++ b/arch/mips/kernel/vpe.c
-@@ -127,6 +127,13 @@ __setup("vpe1_wdog_timeout=", wdog_timeo
- EXPORT_SYMBOL(vpe1_wdog_timeout);
-
- #endif
-+
-+#ifdef CONFIG_IFX_VPE_CACHE_SPLIT /* Code for splitting the cache ways among VPEs. */
-+extern int vpe_icache_shared,vpe_dcache_shared;
-+extern int icache_way0,icache_way1,icache_way2,icache_way3;
-+extern int dcache_way0,dcache_way1,dcache_way2,dcache_way3;
-+#endif
-+
- /* grab the likely amount of memory we will need. */
- #ifdef CONFIG_MIPS_VPE_LOADER_TOM
- #define P_SIZE (2 * 1024 * 1024)
-@@ -865,6 +872,65 @@ static int vpe_run(struct vpe * v)
- /* enable this VPE */
- write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
-
-+#ifdef CONFIG_IFX_VPE_CACHE_SPLIT
-+ if ( (!vpe_icache_shared) || (!vpe_dcache_shared) ) {
-+
-+ /* PCP bit must be 1 to split the cache */
-+ if(read_c0_mvpconf0() & MVPCONF0_PCP) {
-+
-+ if ( !vpe_icache_shared ){
-+ write_vpe_c0_vpeconf0((read_vpe_c0_vpeconf0()) & ~VPECONF0_ICS);
-+
-+ /*
-+ * If any cache way is 1, then that way is denied
-+ * in VPE1. Otherwise assign that way to VPE1.
-+ */
-+ if (!icache_way0)
-+ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_IWX0 );
-+ else
-+ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_IWX0 );
-+ if (!icache_way1)
-+ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_IWX1 );
-+ else
-+ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_IWX1 );
-+ if (!icache_way2)
-+ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_IWX2 );
-+ else
-+ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_IWX2 );
-+ if (!icache_way3)
-+ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_IWX3 );
-+ else
-+ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_IWX3 );
-+ }
-+
-+ if ( !vpe_dcache_shared ) {
-+ write_vpe_c0_vpeconf0((read_vpe_c0_vpeconf0()) & ~VPECONF0_DCS);
-+
-+ /*
-+ * If any cache way is 1, then that way is denied
-+ * in VPE1. Otherwise assign that way to VPE1.
-+ */
-+ if (!dcache_way0)
-+ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_DWX0 );
-+ else
-+ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_DWX0 );
-+ if (!dcache_way1)
-+ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_DWX1 );
-+ else
-+ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_DWX1 );
-+ if (!dcache_way2)
-+ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_DWX2 );
-+ else
-+ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_DWX2 );
-+ if (!dcache_way3)
-+ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() | VPEOPT_DWX3 );
-+ else
-+ write_vpe_c0_vpeopt(read_vpe_c0_vpeopt() & ~VPEOPT_DWX3 );
-+ }
-+ }
-+ }
-+#endif /* endif CONFIG_IFX_VPE_CACHE_SPLIT */
-+
- /* clear out any left overs from a previous program */
- write_vpe_c0_status(0);
- write_vpe_c0_cause(0);
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -1383,6 +1383,106 @@ static int __init setcoherentio(char *st
- __setup("coherentio", setcoherentio);
- #endif
-
-+#ifdef CONFIG_IFX_VPE_CACHE_SPLIT /* Code for splitting the cache ways among VPEs. */
-+
-+#include <asm/mipsmtregs.h>
-+
-+/*
-+ * By default, vpe_icache_shared and vpe_dcache_shared
-+ * values are 1 i.e., both icache and dcache are shared
-+ * among the VPEs.
-+ */
-+
-+int vpe_icache_shared = 1;
-+static int __init vpe_icache_shared_val(char *str)
-+{
-+ get_option(&str, &vpe_icache_shared);
-+ return 1;
-+}
-+__setup("vpe_icache_shared=", vpe_icache_shared_val);
-+EXPORT_SYMBOL(vpe_icache_shared);
-+
-+int vpe_dcache_shared = 1;
-+static int __init vpe_dcache_shared_val(char *str)
-+{
-+ get_option(&str, &vpe_dcache_shared);
-+ return 1;
-+}
-+__setup("vpe_dcache_shared=", vpe_dcache_shared_val);
-+EXPORT_SYMBOL(vpe_dcache_shared);
-+
-+/*
-+ * Software is required to make atleast one icache
-+ * way available for a VPE at all times i.e., one
-+ * can't assign all the icache ways to one VPE.
-+ */
-+
-+int icache_way0 = 0;
-+static int __init icache_way0_val(char *str)
-+{
-+ get_option(&str, &icache_way0);
-+ return 1;
-+}
-+__setup("icache_way0=", icache_way0_val);
-+
-+int icache_way1 = 0;
-+static int __init icache_way1_val(char *str)
-+{
-+ get_option(&str, &icache_way1);
-+ return 1;
-+}
-+__setup("icache_way1=", icache_way1_val);
-+
-+int icache_way2 = 0;
-+static int __init icache_way2_val(char *str)
-+{
-+ get_option(&str, &icache_way2);
-+ return 1;
-+}
-+__setup("icache_way2=", icache_way2_val);
-+
-+int icache_way3 = 0;
-+static int __init icache_way3_val(char *str)
-+{
-+ get_option(&str, &icache_way3);
-+ return 1;
-+}
-+__setup("icache_way3=", icache_way3_val);
-+
-+int dcache_way0 = 0;
-+static int __init dcache_way0_val(char *str)
-+{
-+ get_option(&str, &dcache_way0);
-+ return 1;
-+}
-+__setup("dcache_way0=", dcache_way0_val);
-+
-+int dcache_way1 = 0;
-+static int __init dcache_way1_val(char *str)
-+{
-+ get_option(&str, &dcache_way1);
-+ return 1;
-+}
-+__setup("dcache_way1=", dcache_way1_val);
-+
-+int dcache_way2 = 0;
-+static int __init dcache_way2_val(char *str)
-+{
-+ get_option(&str, &dcache_way2);
-+ return 1;
-+}
-+__setup("dcache_way2=", dcache_way2_val);
-+
-+int dcache_way3 = 0;
-+static int __init dcache_way3_val(char *str)
-+{
-+ get_option(&str, &dcache_way3);
-+ return 1;
-+}
-+__setup("dcache_way3=", dcache_way3_val);
-+
-+#endif /* endif CONFIG_IFX_VPE_CACHE_SPLIT */
-+
- void __cpuinit r4k_cache_init(void)
- {
- extern void build_clear_page(void);
-@@ -1402,6 +1502,78 @@ void __cpuinit r4k_cache_init(void)
- break;
- }
-
-+#ifdef CONFIG_IFX_VPE_CACHE_SPLIT
-+ /*
-+ * We split the cache ways appropriately among the VPEs
-+ * based on cache ways values we received as command line
-+ * arguments
-+ */
-+ if ( (!vpe_icache_shared) || (!vpe_dcache_shared) ){
-+
-+ /* PCP bit must be 1 to split the cache */
-+ if(read_c0_mvpconf0() & MVPCONF0_PCP) {
-+
-+ /* Set CPA bit which enables us to modify VPEOpt register */
-+ write_c0_mvpcontrol((read_c0_mvpcontrol()) | MVPCONTROL_CPA);
-+
-+ if ( !vpe_icache_shared ){
-+ write_c0_vpeconf0((read_c0_vpeconf0()) & ~VPECONF0_ICS);
-+ /*
-+ * If any cache way is 1, then that way is denied
-+ * in VPE0. Otherwise assign that way to VPE0.
-+ */
-+ printk(KERN_DEBUG "icache is split\n");
-+ printk(KERN_DEBUG "icache_way0=%d icache_way1=%d icache_way2=%d icache_way3=%d\n",
-+ icache_way0, icache_way1,icache_way2, icache_way3);
-+ if (icache_way0)
-+ write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_IWX0 );
-+ else
-+ write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_IWX0 );
-+ if (icache_way1)
-+ write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_IWX1 );
-+ else
-+ write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_IWX1 );
-+ if (icache_way2)
-+ write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_IWX2 );
-+ else
-+ write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_IWX2 );
-+ if (icache_way3)
-+ write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_IWX3 );
-+ else
-+ write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_IWX3 );
-+ }
-+
-+ if ( !vpe_dcache_shared ) {
-+ /*
-+ * If any cache way is 1, then that way is denied
-+ * in VPE0. Otherwise assign that way to VPE0.
-+ */
-+ printk(KERN_DEBUG "dcache is split\n");
-+ printk(KERN_DEBUG "dcache_way0=%d dcache_way1=%d dcache_way2=%d dcache_way3=%d\n",
-+ dcache_way0, dcache_way1, dcache_way2, dcache_way3);
-+ write_c0_vpeconf0((read_c0_vpeconf0()) & ~VPECONF0_DCS);
-+ if (dcache_way0)
-+ write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_DWX0 );
-+ else
-+ write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_DWX0 );
-+ if (dcache_way1)
-+ write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_DWX1 );
-+ else
-+ write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_DWX1 );
-+ if (dcache_way2)
-+ write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_DWX2 );
-+ else
-+ write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_DWX2 );
-+ if (dcache_way3)
-+ write_c0_vpeopt(read_c0_vpeopt() | VPEOPT_DWX3 );
-+ else
-+ write_c0_vpeopt(read_c0_vpeopt() & ~VPEOPT_DWX3 );
-+ }
-+ }
-+ }
-+
-+#endif /* endif CONFIG_IFX_VPE_CACHE_SPLIT */
-+
- probe_pcache();
- setup_scache();
-
+++ /dev/null
-From d23a3c21962bcc3dc18e7916c2499cd3b26feaf0 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 20 Mar 2012 08:26:04 +0100
-Subject: [PATCH 61/70] MIPS: clean up clock code
-
----
- arch/mips/lantiq/clk.c | 11 +++
- arch/mips/lantiq/clk.h | 3 +-
- arch/mips/lantiq/xway/devices.c | 2 +-
- arch/mips/lantiq/xway/sysctrl.c | 166 ++++++++++++++++++++++++++++++---------
- 4 files changed, 143 insertions(+), 39 deletions(-)
-
---- a/arch/mips/lantiq/clk.c
-+++ b/arch/mips/lantiq/clk.c
-@@ -44,6 +44,7 @@ struct clk *clk_get_fpi(void)
- {
- return &cpu_clk_generic[1];
- }
-+EXPORT_SYMBOL_GPL(clk_get_fpi);
-
- struct clk *clk_get_io(void)
- {
-@@ -70,6 +71,16 @@ unsigned long clk_get_rate(struct clk *c
- }
- EXPORT_SYMBOL(clk_get_rate);
-
-+int clk_set_rate(struct clk *clk, unsigned long rate)
-+{
-+ if (unlikely(!clk_good(clk)))
-+ return 0;
-+
-+ clk->rate = rate;
-+ return 0;
-+}
-+EXPORT_SYMBOL(clk_set_rate);
-+
- int clk_enable(struct clk *clk)
- {
- if (unlikely(!clk_good(clk)))
---- a/arch/mips/lantiq/clk.h
-+++ b/arch/mips/lantiq/clk.h
-@@ -12,6 +12,7 @@
- #include <linux/clkdev.h>
-
- /* clock speeds */
-+#define CLOCK_33M 33333333
- #define CLOCK_60M 60000000
- #define CLOCK_62_5M 62500000
- #define CLOCK_83M 83333333
-@@ -38,9 +39,9 @@
- struct clk {
- struct clk_lookup cl;
- unsigned long rate;
-- unsigned long (*get_rate) (void);
- unsigned int module;
- unsigned int bits;
-+ unsigned long (*get_rate) (void);
- int (*enable) (struct clk *clk);
- void (*disable) (struct clk *clk);
- int (*activate) (struct clk *clk);
---- a/arch/mips/lantiq/xway/devices.c
-+++ b/arch/mips/lantiq/xway/devices.c
-@@ -59,7 +59,7 @@ static struct resource ltq_stp_resource
-
- void __init ltq_register_gpio_stp(void)
- {
-- platform_device_register_simple("ltq_stp", 0, <q_stp_resource, 1);
-+ platform_device_register_simple("ltq_stp", -1, <q_stp_resource, 1);
- }
-
- /* asc ports - amazon se has its own serial mapping */
---- a/arch/mips/lantiq/xway/sysctrl.c
-+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -16,40 +16,57 @@
- #include "../devices.h"
-
- /* clock control register */
--#define LTQ_CGU_IFCCR 0x0018
-+#define CGU_IFCCR 0x0018
- /* system clock register */
--#define LTQ_CGU_SYS 0x0010
--
--/* the enable / disable registers */
--#define LTQ_PMU_PWDCR 0x1C
--#define LTQ_PMU_PWDSR 0x20
--#define LTQ_PMU_PWDCR1 0x24
--#define LTQ_PMU_PWDSR1 0x28
--
--#define PWDCR(x) ((x) ? (LTQ_PMU_PWDCR1) : (LTQ_PMU_PWDCR))
--#define PWDSR(x) ((x) ? (LTQ_PMU_PWDSR1) : (LTQ_PMU_PWDSR))
--
--/* CGU - clock generation unit */
--#define CGU_EPHY 0x10
-+#define CGU_SYS 0x0010
-+/* pci control register */
-+#define CGU_PCICR 0x0034
-+/* ephy configuration register */
-+#define CGU_EPHY 0x10
-+/* power control register */
-+#define PMU_PWDCR 0x1C
-+/* power status register */
-+#define PMU_PWDSR 0x20
-+/* power control register */
-+#define PMU_PWDCR1 0x24
-+/* power status register */
-+#define PMU_PWDSR1 0x28
-+/* power control register */
-+#define PWDCR(x) ((x) ? (PMU_PWDCR1) : (PMU_PWDCR))
-+/* power status register */
-+#define PWDSR(x) ((x) ? (PMU_PWDSR1) : (PMU_PWDSR))
-
- /* PMU - power management unit */
--#define PMU_DMA 0x0020
--#define PMU_SPI 0x0100
--#define PMU_EPHY 0x0080
--#define PMU_USB 0x8041
--#define PMU_STP 0x0800
--#define PMU_GPT 0x1000
--#define PMU_PPE 0x2000
--#define PMU_FPI 0x4000
--#define PMU_SWITCH 0x10000000
--#define PMU_AHBS 0x2000
--#define PMU_AHBM 0x8000
--#define PMU_PCIE_CLK 0x80000000
--
--#define PMU1_PCIE_PHY 0x0001
--#define PMU1_PCIE_CTL 0x0002
--#define PMU1_PCIE_MSI 0x0020
--#define PMU1_PCIE_PDI 0x0010
-+#define PMU_USB0_P BIT(0)
-+#define PMU_PCI BIT(4)
-+#define PMU_DMA BIT(5)
-+#define PMU_USB0 BIT(5)
-+#define PMU_SPI BIT(8)
-+#define PMU_EPHY BIT(7)
-+#define PMU_EBU BIT(10)
-+#define PMU_STP BIT(11)
-+#define PMU_GPT BIT(12)
-+#define PMU_PPE BIT(13)
-+#define PMU_AHBS BIT(13) /* vr9 */
-+#define PMU_FPI BIT(14)
-+#define PMU_AHBM BIT(15)
-+#define PMU_PPE_QSB BIT(18)
-+#define PMU_PPE_SLL01 BIT(19)
-+#define PMU_PPE_TC BIT(21)
-+#define PMU_PPE_EMA BIT(22)
-+#define PMU_PPE_DPLUM BIT(23)
-+#define PMU_PPE_DPLUS BIT(24)
-+#define PMU_USB1_P BIT(26)
-+#define PMU_USB1 BIT(27)
-+#define PMU_SWITCH BIT(28)
-+#define PMU_PPE_TOP BIT(29)
-+#define PMU_GPHY BIT(30)
-+#define PMU_PCIE_CLK BIT(31)
-+
-+#define PMU1_PCIE_PHY BIT(0)
-+#define PMU1_PCIE_CTL BIT(1)
-+#define PMU1_PCIE_PDI BIT(4)
-+#define PMU1_PCIE_MSI BIT(5)
-
- #define ltq_pmu_w32(x, y) ltq_w32((x), ltq_pmu_membase + (y))
- #define ltq_pmu_r32(x) ltq_r32(ltq_pmu_membase + (x))
-@@ -69,13 +86,13 @@ static void __iomem *ltq_pmu_membase;
-
- static int ltq_cgu_enable(struct clk *clk)
- {
-- ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | clk->bits, LTQ_CGU_IFCCR);
-+ ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) | clk->bits, CGU_IFCCR);
- return 0;
- }
-
- static void ltq_cgu_disable(struct clk *clk)
- {
-- ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~clk->bits, LTQ_CGU_IFCCR);
-+ ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) & ~clk->bits, CGU_IFCCR);
- }
-
- static int ltq_pmu_enable(struct clk *clk)
-@@ -94,9 +111,49 @@ static int ltq_pmu_enable(struct clk *cl
-
- static void ltq_pmu_disable(struct clk *clk)
- {
-- ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) | clk->bits, LTQ_PMU_PWDCR);
-+ ltq_pmu_w32(ltq_pmu_r32(PWDCR(clk->module)) | clk->bits,
-+ PWDCR(clk->module));
- }
-
-+static int ltq_pci_enable(struct clk *clk)
-+{
-+ unsigned int ifccr = ltq_cgu_r32(CGU_IFCCR);
-+ /* set clock bus speed */
-+ if (ltq_is_ar9()) {
-+ ifccr &= ~0x1f00000;
-+ if (clk->rate == CLOCK_33M)
-+ ifccr |= 0xe00000;
-+ else
-+ ifccr |= 0x700000; /* 62.5M */
-+ } else {
-+ ifccr &= ~0xf00000;
-+ if (clk->rate == CLOCK_33M)
-+ ifccr |= 0x800000;
-+ else
-+ ifccr |= 0x400000; /* 62.5M */
-+ }
-+ ltq_cgu_w32(ifccr, CGU_IFCCR);
-+ return 0;
-+}
-+
-+static int ltq_pci_ext_enable(struct clk *clk)
-+{
-+ /* enable external pci clock */
-+ ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) & ~(1 << 16),
-+ CGU_IFCCR);
-+ ltq_cgu_w32((1 << 30), CGU_PCICR);
-+ return 0;
-+}
-+
-+static void ltq_pci_ext_disable(struct clk *clk)
-+{
-+ /* enable external pci clock */
-+ ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) | (1 << 16),
-+ CGU_IFCCR);
-+ ltq_cgu_w32((1 << 31) | (1 << 30), CGU_PCICR);
-+}
-+
-+/* manage the clock gates via PMU */
- static inline void clkdev_add_pmu(const char *dev, const char *con,
- unsigned int module, unsigned int bits)
- {
-@@ -112,6 +169,7 @@ static inline void clkdev_add_pmu(const
- clkdev_add(&clk->cl);
- }
-
-+/* manage the clock generator */
- static inline void clkdev_add_cgu(const char *dev, const char *con,
- unsigned int bits)
- {
-@@ -126,6 +184,33 @@ static inline void clkdev_add_cgu(const
- clkdev_add(&clk->cl);
- }
-
-+/* pci needs its own enable function */
-+static inline void clkdev_add_pci(void)
-+{
-+ struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
-+ struct clk *clk_ext = kzalloc(sizeof(struct clk), GFP_KERNEL);
-+
-+ /* main pci clock */
-+ clk->cl.dev_id = "ltq_pci";
-+ clk->cl.con_id = NULL;
-+ clk->cl.clk = clk;
-+ clk->rate = CLOCK_33M;
-+ clk->enable = ltq_pci_enable;
-+ clk->disable = ltq_pmu_disable;
-+ clk->module = 0;
-+ clk->bits = PMU_PCI;
-+ clkdev_add(&clk->cl);
-+
-+ /* use internal/external bus clock */
-+ clk_ext->cl.dev_id = "ltq_pci";
-+ clk_ext->cl.con_id = "external";
-+ clk_ext->cl.clk = clk_ext;
-+ clk_ext->enable = ltq_pci_ext_enable;
-+ clk_ext->disable = ltq_pci_ext_disable;
-+ clkdev_add(&clk_ext->cl);
-+
-+}
-+
- void __init ltq_soc_init(void)
- {
- ltq_pmu_membase = ltq_remap_resource(<q_pmu_resource);
-@@ -144,14 +229,16 @@ void __init ltq_soc_init(void)
- ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0);
-
- /* add our clocks */
-+ clkdev_add_pmu("ltq_fpi", NULL, 0, PMU_FPI);
- clkdev_add_pmu("ltq_dma", NULL, 0, PMU_DMA);
- clkdev_add_pmu("ltq_stp", NULL, 0, PMU_STP);
- clkdev_add_pmu("ltq_spi", NULL, 0, PMU_SPI);
- clkdev_add_pmu("ltq_gptu", NULL, 0, PMU_GPT);
-+ clkdev_add_pmu("ltq_ebu", NULL, 0, PMU_EBU);
- if (!ltq_is_vr9())
- clkdev_add_pmu("ltq_etop", NULL, 0, PMU_PPE);
- if (ltq_is_ase()) {
-- if (ltq_cgu_r32(LTQ_CGU_SYS) & (1 << 5))
-+ if (ltq_cgu_r32(CGU_SYS) & (1 << 5))
- clkdev_add_static(CLOCK_266M, CLOCK_133M, CLOCK_133M);
- else
- clkdev_add_static(CLOCK_133M, CLOCK_133M, CLOCK_133M);
-@@ -166,11 +253,16 @@ void __init ltq_soc_init(void)
- clkdev_add_pmu("ltq_pcie", "pdi", 1, PMU1_PCIE_PDI);
- clkdev_add_pmu("ltq_pcie", "ctl", 1, PMU1_PCIE_CTL);
- clkdev_add_pmu("ltq_pcie", "ahb", 0, PMU_AHBM | PMU_AHBS);
-- clkdev_add_pmu("usb0", NULL, 0, (1<<6) | 1);
-- clkdev_add_pmu("usb1", NULL, 0, (1<<26) | (1<<27));
-+ clkdev_add_pmu("usb0", NULL, 0, PMU_USB0 | PMU_USB0_P);
-+ clkdev_add_pmu("usb1", NULL, 0, PMU_USB1 | PMU_USB1_P);
-+ clkdev_add_pmu("ltq_vrx200", NULL, 0,
-+ PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
-+ PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
-+ PMU_PPE_QSB);
- } else {
- clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
- ltq_danube_io_region_clock());
-+ clkdev_add_pci();
- if (ltq_is_ar9())
- clkdev_add_pmu("ltq_etop", "switch", 0, PMU_SWITCH);
- }
--- /dev/null
+From 5e04db198bbad2dc345262e838965332826eb37c Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 16 Mar 2012 15:49:32 +0100
+Subject: [PATCH 61/73] MIPS: cleanup reset code
+
+---
+ arch/mips/lantiq/xway/reset.c | 59 ++++++++++++++++++++++++++++++++++------
+ 1 files changed, 50 insertions(+), 9 deletions(-)
+
+diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
+index ca2212a..8a5dff1 100644
+--- a/arch/mips/lantiq/xway/reset.c
++++ b/arch/mips/lantiq/xway/reset.c
+@@ -11,6 +11,7 @@
+ #include <linux/ioport.h>
+ #include <linux/pm.h>
+ #include <linux/export.h>
++#include <linux/delay.h>
+ #include <asm/reboot.h>
+
+ #include <lantiq_soc.h>
+@@ -20,12 +21,45 @@
+ #define ltq_rcu_w32(x, y) ltq_w32((x), ltq_rcu_membase + (y))
+ #define ltq_rcu_r32(x) ltq_r32(ltq_rcu_membase + (x))
+
+-/* register definitions */
+-#define LTQ_RCU_RST 0x0010
+-#define LTQ_RCU_RST_ALL 0x40000000
+-
+-#define LTQ_RCU_RST_STAT 0x0014
+-#define LTQ_RCU_STAT_SHIFT 26
++/* reset request register */
++#define RCU_RST_REQ 0x0010
++/* reset status register */
++#define RCU_RST_STAT 0x0014
++
++/* reset cause */
++#define RCU_STAT_SHIFT 26
++/* Global SW Reset */
++#define RCU_RD_SRST BIT(30)
++/* Memory Controller */
++#define RCU_RD_MC BIT(14)
++/* PCI core */
++#define RCU_RD_PCI BIT(13)
++/* Voice DFE/AFE */
++#define RCU_RD_DFE_AFE BIT(12)
++/* DSL AFE */
++#define RCU_RD_DSL_AFE BIT(11)
++/* SDIO core */
++#define RCU_RD_SDIO BIT(10)
++/* DMA core */
++#define RCU_RD_DMA BIT(9)
++/* PPE core */
++#define RCU_RD_PPE BIT(8)
++/* ARC/DFE core */
++#define RCU_RD_ARC_DFE BIT(7)
++/* AHB bus */
++#define RCU_RD_AHB BIT(6)
++/* Ethernet MAC1 */
++#define RCU_RD_ENET_MAC1 BIT(5)
++/* USB and Phy core */
++#define RCU_RD_USB BIT(4)
++/* CPU1 subsystem */
++#define RCU_RD_CPU1 BIT(3)
++/* FPI bus */
++#define RCU_RD_FPI BIT(2)
++/* CPU0 subsystem */
++#define RCU_RD_CPU0 BIT(1)
++/* HW reset via HRST pin */
++#define RCU_RD_HRST BIT(0)
+
+ static struct resource ltq_rcu_resource =
+ MEM_RES("rcu", LTQ_RCU_BASE_ADDR, LTQ_RCU_SIZE);
+@@ -36,16 +70,23 @@ static void __iomem *ltq_rcu_membase;
+ /* This function is used by the watchdog driver */
+ int ltq_reset_cause(void)
+ {
+- u32 val = ltq_rcu_r32(LTQ_RCU_RST_STAT);
+- return val >> LTQ_RCU_STAT_SHIFT;
++ u32 val = ltq_rcu_r32(RCU_RST_STAT);
++ return val >> RCU_STAT_SHIFT;
+ }
+ EXPORT_SYMBOL_GPL(ltq_reset_cause);
+
++void ltq_reset_once(unsigned int module, ulong usec)
++{
++ ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | module, RCU_RST_REQ);
++ udelay(usec);
++ ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~module, RCU_RST_REQ);
++}
++
+ static void ltq_machine_restart(char *command)
+ {
+ pr_notice("System restart\n");
+ local_irq_disable();
+- ltq_rcu_w32(ltq_rcu_r32(LTQ_RCU_RST) | LTQ_RCU_RST_ALL, LTQ_RCU_RST);
++ ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | RCU_RD_SRST, RCU_RST_REQ);
+ unreachable();
+ }
+
+--
+1.7.9.1
+
+++ /dev/null
-From 1748dc7b4974109040d0249ac1fc322c120eb528 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 16 Mar 2012 15:49:32 +0100
-Subject: [PATCH 62/70] MIPS: cleanup reset code
-
----
- arch/mips/lantiq/xway/reset.c | 59 ++++++++++++++++++++++++++++++++++------
- 1 files changed, 50 insertions(+), 9 deletions(-)
-
---- a/arch/mips/lantiq/xway/reset.c
-+++ b/arch/mips/lantiq/xway/reset.c
-@@ -11,6 +11,7 @@
- #include <linux/ioport.h>
- #include <linux/pm.h>
- #include <linux/export.h>
-+#include <linux/delay.h>
- #include <asm/reboot.h>
-
- #include <lantiq_soc.h>
-@@ -20,12 +21,45 @@
- #define ltq_rcu_w32(x, y) ltq_w32((x), ltq_rcu_membase + (y))
- #define ltq_rcu_r32(x) ltq_r32(ltq_rcu_membase + (x))
-
--/* register definitions */
--#define LTQ_RCU_RST 0x0010
--#define LTQ_RCU_RST_ALL 0x40000000
--
--#define LTQ_RCU_RST_STAT 0x0014
--#define LTQ_RCU_STAT_SHIFT 26
-+/* reset request register */
-+#define RCU_RST_REQ 0x0010
-+/* reset status register */
-+#define RCU_RST_STAT 0x0014
-+
-+/* reset cause */
-+#define RCU_STAT_SHIFT 26
-+/* Global SW Reset */
-+#define RCU_RD_SRST BIT(30)
-+/* Memory Controller */
-+#define RCU_RD_MC BIT(14)
-+/* PCI core */
-+#define RCU_RD_PCI BIT(13)
-+/* Voice DFE/AFE */
-+#define RCU_RD_DFE_AFE BIT(12)
-+/* DSL AFE */
-+#define RCU_RD_DSL_AFE BIT(11)
-+/* SDIO core */
-+#define RCU_RD_SDIO BIT(10)
-+/* DMA core */
-+#define RCU_RD_DMA BIT(9)
-+/* PPE core */
-+#define RCU_RD_PPE BIT(8)
-+/* ARC/DFE core */
-+#define RCU_RD_ARC_DFE BIT(7)
-+/* AHB bus */
-+#define RCU_RD_AHB BIT(6)
-+/* Ethernet MAC1 */
-+#define RCU_RD_ENET_MAC1 BIT(5)
-+/* USB and Phy core */
-+#define RCU_RD_USB BIT(4)
-+/* CPU1 subsystem */
-+#define RCU_RD_CPU1 BIT(3)
-+/* FPI bus */
-+#define RCU_RD_FPI BIT(2)
-+/* CPU0 subsystem */
-+#define RCU_RD_CPU0 BIT(1)
-+/* HW reset via HRST pin */
-+#define RCU_RD_HRST BIT(0)
-
- static struct resource ltq_rcu_resource =
- MEM_RES("rcu", LTQ_RCU_BASE_ADDR, LTQ_RCU_SIZE);
-@@ -36,16 +70,23 @@ static void __iomem *ltq_rcu_membase;
- /* This function is used by the watchdog driver */
- int ltq_reset_cause(void)
- {
-- u32 val = ltq_rcu_r32(LTQ_RCU_RST_STAT);
-- return val >> LTQ_RCU_STAT_SHIFT;
-+ u32 val = ltq_rcu_r32(RCU_RST_STAT);
-+ return val >> RCU_STAT_SHIFT;
- }
- EXPORT_SYMBOL_GPL(ltq_reset_cause);
-
-+void ltq_reset_once(unsigned int module, ulong usec)
-+{
-+ ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | module, RCU_RST_REQ);
-+ udelay(usec);
-+ ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~module, RCU_RST_REQ);
-+}
-+
- static void ltq_machine_restart(char *command)
- {
- pr_notice("System restart\n");
- local_irq_disable();
-- ltq_rcu_w32(ltq_rcu_r32(LTQ_RCU_RST) | LTQ_RCU_RST_ALL, LTQ_RCU_RST);
-+ ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | RCU_RD_SRST, RCU_RST_REQ);
- unreachable();
- }
-
--- /dev/null
+From 42cfda7eaf263248257cef40b88e06b7a0666eb4 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sat, 17 Mar 2012 09:58:07 +0100
+Subject: [PATCH 62/73] MIPS: lantiq: fixes ar9/vr9 clock
+
+---
+ arch/mips/lantiq/clk.h | 4 +++-
+ arch/mips/lantiq/xway/clk.c | 29 ++++++++++++++++++++++++-----
+ arch/mips/lantiq/xway/sysctrl.c | 13 ++++++++-----
+ 3 files changed, 35 insertions(+), 11 deletions(-)
+
+diff --git a/arch/mips/lantiq/clk.h b/arch/mips/lantiq/clk.h
+index b34e675..010dfa7 100644
+--- a/arch/mips/lantiq/clk.h
++++ b/arch/mips/lantiq/clk.h
+@@ -56,8 +56,10 @@ extern unsigned long ltq_danube_cpu_hz(void);
+ extern unsigned long ltq_danube_fpi_hz(void);
+ extern unsigned long ltq_danube_io_region_clock(void);
+
++extern unsigned long ltq_ar9_cpu_hz(void);
++extern unsigned long ltq_ar9_fpi_hz(void);
++
+ extern unsigned long ltq_vr9_cpu_hz(void);
+ extern unsigned long ltq_vr9_fpi_hz(void);
+-extern unsigned long ltq_vr9_io_region_clock(void);
+
+ #endif
+diff --git a/arch/mips/lantiq/xway/clk.c b/arch/mips/lantiq/xway/clk.c
+index 3635c9f..2bafc04 100644
+--- a/arch/mips/lantiq/xway/clk.c
++++ b/arch/mips/lantiq/xway/clk.c
+@@ -217,6 +217,30 @@ unsigned long ltq_danube_cpu_hz(void)
+ }
+ }
+
++unsigned long ltq_ar9_sys_hz(void)
++{
++ if (((ltq_cgu_r32(LTQ_CGU_SYS) >> 3) & 0x3) == 0x2)
++ return CLOCK_393M;
++ return CLOCK_333M;
++}
++
++unsigned long ltq_ar9_fpi_hz(void)
++{
++ unsigned long sys = ltq_ar9_sys_hz();
++
++ if (ltq_cgu_r32(LTQ_CGU_SYS) & BIT(0))
++ return sys;
++ return sys >> 1;
++}
++
++unsigned long ltq_ar9_cpu_hz(void)
++{
++ if (ltq_cgu_r32(LTQ_CGU_SYS) & BIT(2))
++ return ltq_ar9_fpi_hz();
++ else
++ return ltq_ar9_sys_hz();
++}
++
+ unsigned long ltq_danube_fpi_hz(void)
+ {
+ unsigned long ddr_clock = DDR_HZ;
+@@ -299,11 +323,6 @@ unsigned long ltq_vr9_fpi_hz(void)
+ return clk;
+ }
+
+-unsigned long ltq_vr9_io_region_clock(void)
+-{
+- return ltq_vr9_fpi_hz();
+-}
+-
+ unsigned long ltq_vr9_fpi_bus_clock(int fpi)
+ {
+ return ltq_vr9_fpi_hz();
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+index 9df048c..6771a7e 100644
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -237,6 +237,8 @@ void __init ltq_soc_init(void)
+ clkdev_add_pmu("ltq_ebu", NULL, 0, PMU_EBU);
+ if (!ltq_is_vr9())
+ clkdev_add_pmu("ltq_etop", NULL, 0, PMU_PPE);
++ if (!ltq_is_ase())
++ clkdev_add_pci();
+ if (ltq_is_ase()) {
+ if (ltq_cgu_r32(CGU_SYS) & (1 << 5))
+ clkdev_add_static(CLOCK_266M, CLOCK_133M, CLOCK_133M);
+@@ -246,7 +248,7 @@ void __init ltq_soc_init(void)
+ clkdev_add_pmu("ltq_etop", "ephy", 0, PMU_EPHY);
+ } else if (ltq_is_vr9()) {
+ clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(),
+- ltq_vr9_io_region_clock());
++ ltq_vr9_fpi_hz());
+ clkdev_add_pmu("ltq_pcie", "phy", 1, PMU1_PCIE_PHY);
+ clkdev_add_pmu("ltq_pcie", "bus", 0, PMU_PCIE_CLK);
+ clkdev_add_pmu("ltq_pcie", "msi", 1, PMU1_PCIE_MSI);
+@@ -259,11 +261,12 @@ void __init ltq_soc_init(void)
+ PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
+ PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
+ PMU_PPE_QSB);
++ } else if (ltq_is_ar9()) {
++ clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
++ ltq_ar9_fpi_hz());
++ clkdev_add_pmu("ltq_etop", "switch", 0, PMU_SWITCH);
+ } else {
+ clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
+- ltq_danube_io_region_clock());
+- clkdev_add_pci();
+- if (ltq_is_ar9())
+- clkdev_add_pmu("ltq_etop", "switch", 0, PMU_SWITCH);
++ ltq_danube_io_region_clock());
+ }
+ }
+--
+1.7.9.1
+
+++ /dev/null
-From 449adc45e29be18da14b23e9ccd97ba5251ffcc9 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sat, 17 Mar 2012 09:58:07 +0100
-Subject: [PATCH 63/70] MIPS: lantiq: fixes ar9/vr9 clock
-
----
- arch/mips/lantiq/clk.h | 4 +++-
- arch/mips/lantiq/xway/clk.c | 29 ++++++++++++++++++++++++-----
- arch/mips/lantiq/xway/sysctrl.c | 13 ++++++++-----
- 3 files changed, 35 insertions(+), 11 deletions(-)
-
---- a/arch/mips/lantiq/clk.h
-+++ b/arch/mips/lantiq/clk.h
-@@ -56,8 +56,10 @@ extern unsigned long ltq_danube_cpu_hz(v
- extern unsigned long ltq_danube_fpi_hz(void);
- extern unsigned long ltq_danube_io_region_clock(void);
-
-+extern unsigned long ltq_ar9_cpu_hz(void);
-+extern unsigned long ltq_ar9_fpi_hz(void);
-+
- extern unsigned long ltq_vr9_cpu_hz(void);
- extern unsigned long ltq_vr9_fpi_hz(void);
--extern unsigned long ltq_vr9_io_region_clock(void);
-
- #endif
---- a/arch/mips/lantiq/xway/clk.c
-+++ b/arch/mips/lantiq/xway/clk.c
-@@ -217,6 +217,30 @@ unsigned long ltq_danube_cpu_hz(void)
- }
- }
-
-+unsigned long ltq_ar9_sys_hz(void)
-+{
-+ if (((ltq_cgu_r32(LTQ_CGU_SYS) >> 3) & 0x3) == 0x2)
-+ return CLOCK_393M;
-+ return CLOCK_333M;
-+}
-+
-+unsigned long ltq_ar9_fpi_hz(void)
-+{
-+ unsigned long sys = ltq_ar9_sys_hz();
-+
-+ if (ltq_cgu_r32(LTQ_CGU_SYS) & BIT(0))
-+ return sys;
-+ return sys >> 1;
-+}
-+
-+unsigned long ltq_ar9_cpu_hz(void)
-+{
-+ if (ltq_cgu_r32(LTQ_CGU_SYS) & BIT(2))
-+ return ltq_ar9_fpi_hz();
-+ else
-+ return ltq_ar9_sys_hz();
-+}
-+
- unsigned long ltq_danube_fpi_hz(void)
- {
- unsigned long ddr_clock = DDR_HZ;
-@@ -299,11 +323,6 @@ unsigned long ltq_vr9_fpi_hz(void)
- return clk;
- }
-
--unsigned long ltq_vr9_io_region_clock(void)
--{
-- return ltq_vr9_fpi_hz();
--}
--
- unsigned long ltq_vr9_fpi_bus_clock(int fpi)
- {
- return ltq_vr9_fpi_hz();
---- a/arch/mips/lantiq/xway/sysctrl.c
-+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -237,6 +237,8 @@ void __init ltq_soc_init(void)
- clkdev_add_pmu("ltq_ebu", NULL, 0, PMU_EBU);
- if (!ltq_is_vr9())
- clkdev_add_pmu("ltq_etop", NULL, 0, PMU_PPE);
-+ if (!ltq_is_ase())
-+ clkdev_add_pci();
- if (ltq_is_ase()) {
- if (ltq_cgu_r32(CGU_SYS) & (1 << 5))
- clkdev_add_static(CLOCK_266M, CLOCK_133M, CLOCK_133M);
-@@ -246,7 +248,7 @@ void __init ltq_soc_init(void)
- clkdev_add_pmu("ltq_etop", "ephy", 0, PMU_EPHY);
- } else if (ltq_is_vr9()) {
- clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(),
-- ltq_vr9_io_region_clock());
-+ ltq_vr9_fpi_hz());
- clkdev_add_pmu("ltq_pcie", "phy", 1, PMU1_PCIE_PHY);
- clkdev_add_pmu("ltq_pcie", "bus", 0, PMU_PCIE_CLK);
- clkdev_add_pmu("ltq_pcie", "msi", 1, PMU1_PCIE_MSI);
-@@ -259,11 +261,12 @@ void __init ltq_soc_init(void)
- PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
- PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
- PMU_PPE_QSB);
-+ } else if (ltq_is_ar9()) {
-+ clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
-+ ltq_ar9_fpi_hz());
-+ clkdev_add_pmu("ltq_etop", "switch", 0, PMU_SWITCH);
- } else {
- clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
-- ltq_danube_io_region_clock());
-- clkdev_add_pci();
-- if (ltq_is_ar9())
-- clkdev_add_pmu("ltq_etop", "switch", 0, PMU_SWITCH);
-+ ltq_danube_io_region_clock());
- }
- }
--- /dev/null
+From 08d0c1d1f42f6bc6d446763dafe5338b0963cf58 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 19 Mar 2012 15:53:37 +0100
+Subject: [PATCH 63/73] MIPS: lantiq: fixes danube clock
+
+---
+ arch/mips/lantiq/xway/clk.c | 20 ++++++++++----------
+ 1 files changed, 10 insertions(+), 10 deletions(-)
+
+diff --git a/arch/mips/lantiq/xway/clk.c b/arch/mips/lantiq/xway/clk.c
+index 2bafc04..5d850dc 100644
+--- a/arch/mips/lantiq/xway/clk.c
++++ b/arch/mips/lantiq/xway/clk.c
+@@ -181,7 +181,7 @@ unsigned long ltq_danube_io_region_clock(void)
+ {
+ unsigned int ret = ltq_get_pll0_fosc();
+
+- switch (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & CGU_SYS_DDR_SEL) {
++ switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0x3) {
+ default:
+ case 0:
+ return (ret + 1) / 2;
+@@ -203,6 +203,15 @@ unsigned long ltq_danube_fpi_bus_clock(int fpi)
+ return ret;
+ }
+
++unsigned long ltq_danube_fpi_hz(void)
++{
++ unsigned long ddr_clock = DDR_HZ;
++
++ if (ltq_cgu_r32(LTQ_CGU_SYS) & 0x40)
++ return ddr_clock >> 1;
++ return ddr_clock;
++}
++
+ unsigned long ltq_danube_cpu_hz(void)
+ {
+ switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0xc) {
+@@ -241,15 +250,6 @@ unsigned long ltq_ar9_cpu_hz(void)
+ return ltq_ar9_sys_hz();
+ }
+
+-unsigned long ltq_danube_fpi_hz(void)
+-{
+- unsigned long ddr_clock = DDR_HZ;
+-
+- if (ltq_cgu_r32(LTQ_CGU_SYS) & 0x40)
+- return ddr_clock >> 1;
+- return ddr_clock;
+-}
+-
+ unsigned long ltq_vr9_cpu_hz(void)
+ {
+ unsigned int cpu_sel;
+--
+1.7.9.1
+
--- /dev/null
+From 76d01e1bc369026d9ec47d2c8355871c083134d2 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 20 Mar 2012 13:05:11 +0100
+Subject: [PATCH 64/73] MIPS: adds dsl clocks
+
+---
+ arch/mips/lantiq/xway/sysctrl.c | 15 +++++++++++++--
+ 1 files changed, 13 insertions(+), 2 deletions(-)
+
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+index 6771a7e..3672fc6 100644
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -41,8 +41,9 @@
+ #define PMU_PCI BIT(4)
+ #define PMU_DMA BIT(5)
+ #define PMU_USB0 BIT(5)
++#define PMU_EPHY BIT(7) /* ase */
+ #define PMU_SPI BIT(8)
+-#define PMU_EPHY BIT(7)
++#define PMU_DFE BIT(9)
+ #define PMU_EBU BIT(10)
+ #define PMU_STP BIT(11)
+ #define PMU_GPT BIT(12)
+@@ -147,7 +148,7 @@ static int ltq_pci_ext_enable(struct clk *clk)
+
+ static void ltq_pci_ext_disable(struct clk *clk)
+ {
+- /* enable external pci clock */
++ /* disable external pci clock (internal) */
+ ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) | (1 << 16),
+ CGU_IFCCR);
+ ltq_cgu_w32((1 << 31) | (1 << 30), CGU_PCICR);
+@@ -246,6 +247,9 @@ void __init ltq_soc_init(void)
+ clkdev_add_static(CLOCK_133M, CLOCK_133M, CLOCK_133M);
+ clkdev_add_cgu("ltq_etop", "ephycgu", CGU_EPHY),
+ clkdev_add_pmu("ltq_etop", "ephy", 0, PMU_EPHY);
++ clkdev_add_pmu("ltq_dsl", NULL, 0,
++ PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
++ PMU_AHBS | PMU_DFE);
+ } else if (ltq_is_vr9()) {
+ clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(),
+ ltq_vr9_fpi_hz());
+@@ -261,12 +265,19 @@ void __init ltq_soc_init(void)
+ PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
+ PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
+ PMU_PPE_QSB);
++ clkdev_add_pmu("ltq_dsl", NULL, 0, PMU_DFE | PMU_AHBS);
+ } else if (ltq_is_ar9()) {
+ clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
+ ltq_ar9_fpi_hz());
+ clkdev_add_pmu("ltq_etop", "switch", 0, PMU_SWITCH);
++ clkdev_add_pmu("ltq_dsl", NULL, 0,
++ PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
++ PMU_PPE_QSB | PMU_AHBS | PMU_DFE);
+ } else {
+ clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
+ ltq_danube_io_region_clock());
++ clkdev_add_pmu("ltq_dsl", NULL, 0,
++ PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
++ PMU_PPE_QSB | PMU_AHBS | PMU_DFE);
+ }
+ }
+--
+1.7.9.1
+
+++ /dev/null
-From 1303ac4fbe98c7132717102223089dc10d0ab4a2 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 19 Mar 2012 15:53:37 +0100
-Subject: [PATCH 64/70] MIPS: lantiq: fixes danube clock
-
----
- arch/mips/lantiq/xway/clk.c | 20 ++++++++++----------
- 1 files changed, 10 insertions(+), 10 deletions(-)
-
---- a/arch/mips/lantiq/xway/clk.c
-+++ b/arch/mips/lantiq/xway/clk.c
-@@ -181,7 +181,7 @@ unsigned long ltq_danube_io_region_clock
- {
- unsigned int ret = ltq_get_pll0_fosc();
-
-- switch (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & CGU_SYS_DDR_SEL) {
-+ switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0x3) {
- default:
- case 0:
- return (ret + 1) / 2;
-@@ -203,6 +203,15 @@ unsigned long ltq_danube_fpi_bus_clock(i
- return ret;
- }
-
-+unsigned long ltq_danube_fpi_hz(void)
-+{
-+ unsigned long ddr_clock = DDR_HZ;
-+
-+ if (ltq_cgu_r32(LTQ_CGU_SYS) & 0x40)
-+ return ddr_clock >> 1;
-+ return ddr_clock;
-+}
-+
- unsigned long ltq_danube_cpu_hz(void)
- {
- switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0xc) {
-@@ -241,15 +250,6 @@ unsigned long ltq_ar9_cpu_hz(void)
- return ltq_ar9_sys_hz();
- }
-
--unsigned long ltq_danube_fpi_hz(void)
--{
-- unsigned long ddr_clock = DDR_HZ;
--
-- if (ltq_cgu_r32(LTQ_CGU_SYS) & 0x40)
-- return ddr_clock >> 1;
-- return ddr_clock;
--}
--
- unsigned long ltq_vr9_cpu_hz(void)
- {
- unsigned int cpu_sel;
+++ /dev/null
-From a840d623b6a70428e8b698f0116fecc38e16e668 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 20 Mar 2012 13:05:11 +0100
-Subject: [PATCH 65/70] MIPS: adds dsl clocks
-
----
- arch/mips/lantiq/xway/sysctrl.c | 15 +++++++++++++--
- 1 files changed, 13 insertions(+), 2 deletions(-)
-
---- a/arch/mips/lantiq/xway/sysctrl.c
-+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -41,8 +41,9 @@
- #define PMU_PCI BIT(4)
- #define PMU_DMA BIT(5)
- #define PMU_USB0 BIT(5)
-+#define PMU_EPHY BIT(7) /* ase */
- #define PMU_SPI BIT(8)
--#define PMU_EPHY BIT(7)
-+#define PMU_DFE BIT(9)
- #define PMU_EBU BIT(10)
- #define PMU_STP BIT(11)
- #define PMU_GPT BIT(12)
-@@ -147,7 +148,7 @@ static int ltq_pci_ext_enable(struct clk
-
- static void ltq_pci_ext_disable(struct clk *clk)
- {
-- /* enable external pci clock */
-+ /* disable external pci clock (internal) */
- ltq_cgu_w32(ltq_cgu_r32(CGU_IFCCR) | (1 << 16),
- CGU_IFCCR);
- ltq_cgu_w32((1 << 31) | (1 << 30), CGU_PCICR);
-@@ -246,6 +247,9 @@ void __init ltq_soc_init(void)
- clkdev_add_static(CLOCK_133M, CLOCK_133M, CLOCK_133M);
- clkdev_add_cgu("ltq_etop", "ephycgu", CGU_EPHY),
- clkdev_add_pmu("ltq_etop", "ephy", 0, PMU_EPHY);
-+ clkdev_add_pmu("ltq_dsl", NULL, 0,
-+ PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
-+ PMU_AHBS | PMU_DFE);
- } else if (ltq_is_vr9()) {
- clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(),
- ltq_vr9_fpi_hz());
-@@ -261,12 +265,19 @@ void __init ltq_soc_init(void)
- PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
- PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
- PMU_PPE_QSB);
-+ clkdev_add_pmu("ltq_dsl", NULL, 0, PMU_DFE | PMU_AHBS);
- } else if (ltq_is_ar9()) {
- clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
- ltq_ar9_fpi_hz());
- clkdev_add_pmu("ltq_etop", "switch", 0, PMU_SWITCH);
-+ clkdev_add_pmu("ltq_dsl", NULL, 0,
-+ PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
-+ PMU_PPE_QSB | PMU_AHBS | PMU_DFE);
- } else {
- clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
- ltq_danube_io_region_clock());
-+ clkdev_add_pmu("ltq_dsl", NULL, 0,
-+ PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
-+ PMU_PPE_QSB | PMU_AHBS | PMU_DFE);
- }
- }
--- /dev/null
+From 75ecc8a55268df4eee6c97f8236a42c82fde44b2 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 20 Mar 2012 08:22:11 +0100
+Subject: [PATCH 65/73] MIPS: lantiq: dont always register asc0
+
+---
+ arch/mips/lantiq/xway/prom.c | 6 ++----
+ 1 files changed, 2 insertions(+), 4 deletions(-)
+
+diff --git a/arch/mips/lantiq/xway/prom.c b/arch/mips/lantiq/xway/prom.c
+index e3dcbbd..f776d5a 100644
+--- a/arch/mips/lantiq/xway/prom.c
++++ b/arch/mips/lantiq/xway/prom.c
+@@ -101,12 +101,10 @@ void __init ltq_soc_detect(struct ltq_soc_info *i)
+
+ void __init ltq_soc_setup(void)
+ {
+- if (ltq_is_ase()) {
++ if (ltq_is_ase())
+ ltq_register_ase_asc();
+- } else {
+- ltq_register_asc(0);
++ else
+ ltq_register_asc(1);
+- }
+ ltq_register_gpio();
+ ltq_register_wdt();
+ }
+--
+1.7.9.1
+
+++ /dev/null
-From ff4470f274b61cebaeb1586f2f462ff66b8041cb Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 20 Mar 2012 08:22:11 +0100
-Subject: [PATCH 66/70] MIPS: lantiq: dont always register asc0
-
----
- arch/mips/lantiq/xway/prom.c | 6 ++----
- 1 files changed, 2 insertions(+), 4 deletions(-)
-
---- a/arch/mips/lantiq/xway/prom.c
-+++ b/arch/mips/lantiq/xway/prom.c
-@@ -101,12 +101,10 @@ void __init ltq_soc_detect(struct ltq_so
-
- void __init ltq_soc_setup(void)
- {
-- if (ltq_is_ase()) {
-+ if (ltq_is_ase())
- ltq_register_ase_asc();
-- } else {
-- ltq_register_asc(0);
-+ else
- ltq_register_asc(1);
-- }
- ltq_register_gpio();
- ltq_register_wdt();
- }
--- /dev/null
+From 88ac424363e7d5d0a9301bd163877f8b442cc865 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 20 Mar 2012 09:44:27 +0100
+Subject: [PATCH 66/73] MIPS: lantiq: irqs were not cleared properly on boot
+
+---
+ arch/mips/lantiq/irq.c | 10 +++++-----
+ 1 files changed, 5 insertions(+), 5 deletions(-)
+
+diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
+index 770a10c..d4e70b4 100644
+--- a/arch/mips/lantiq/irq.c
++++ b/arch/mips/lantiq/irq.c
+@@ -327,12 +327,12 @@ void __init arch_init_irq(void)
+ panic("Failed to remap eiu memory\n");
+ }
+
+- /* make sure all irqs are turned off by default */
+- for (i = 0; i < 5; i++)
++ for (i = 0; i < 5; i++) {
++ /* make sure all irqs are turned off by default */
+ ltq_icu_w32(0, LTQ_ICU_IM0_IER + (i * LTQ_ICU_OFFSET));
+-
+- /* clear all possibly pending interrupts */
+- ltq_icu_w32(~0, LTQ_ICU_IM0_ISR + (i * LTQ_ICU_OFFSET));
++ /* clear all possibly pending interrupts */
++ ltq_icu_w32(~0, LTQ_ICU_IM0_ISR + (i * LTQ_ICU_OFFSET));
++ }
+
+ mips_cpu_irq_init();
+
+--
+1.7.9.1
+
--- /dev/null
+From 5e679bb5e0ba948e5a1aa52ab50b6b60d175348d Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 21 Mar 2012 14:17:37 +0100
+Subject: [PATCH 67/73] MIPS: lantiq: adds bootsel helper
+
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 12 ++++++++++++
+ arch/mips/lantiq/xway/reset.c | 12 +++++++++++-
+ 2 files changed, 23 insertions(+), 1 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+index bfdeb16..1ec8f2a 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+@@ -144,6 +144,18 @@
+ #define LTQ_MPS_BASE_ADDR (KSEG1 + 0x1F107000)
+ #define LTQ_MPS_CHIPID ((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344))
+
++/* BOOT_SEL - find what boot media we have */
++#define BS_EXT_ROM 0x0
++#define BS_FLASH 0x1
++#define BS_MII0 0x2
++#define BS_PCI 0x3
++#define BS_UART1 0x4
++#define BS_SPI 0x5
++#define BS_NAND 0x6
++#define BS_RMII0 0x7
++
++extern unsigned char ltq_boot_select(void);
++
+ /* register access macros for EBU and CGU */
+ #define ltq_ebu_w32(x, y) ltq_w32((x), ltq_ebu_membase + (y))
+ #define ltq_ebu_r32(x) ltq_r32(ltq_ebu_membase + (x))
+diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
+index 8a5dff1..b8f7ffb 100644
+--- a/arch/mips/lantiq/xway/reset.c
++++ b/arch/mips/lantiq/xway/reset.c
+@@ -27,7 +27,11 @@
+ #define RCU_RST_STAT 0x0014
+
+ /* reset cause */
+-#define RCU_STAT_SHIFT 26
++#define RCU_STAT_SHIFT 26
++/* boot selection */
++#define RCU_BOOT_SEL_SHIFT 26
++#define RCU_BOOT_SEL_MASK 0x7
++
+ /* Global SW Reset */
+ #define RCU_RD_SRST BIT(30)
+ /* Memory Controller */
+@@ -75,6 +79,12 @@ int ltq_reset_cause(void)
+ }
+ EXPORT_SYMBOL_GPL(ltq_reset_cause);
+
++unsigned char ltq_boot_select(void)
++{
++ u32 val = ltq_rcu_r32(RCU_RST_STAT);
++ return (val >> RCU_BOOT_SEL_SHIFT) & RCU_BOOT_SEL_MASK;
++}
++
+ void ltq_reset_once(unsigned int module, ulong usec)
+ {
+ ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | module, RCU_RST_REQ);
+--
+1.7.9.1
+
+++ /dev/null
-From 845d2430d74cf6e2326da95b9205258170b30c86 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 20 Mar 2012 09:44:27 +0100
-Subject: [PATCH 67/70] MIPS: lantiq: irqs were not cleared properly on boot
-
----
- arch/mips/lantiq/irq.c | 10 +++++-----
- 1 files changed, 5 insertions(+), 5 deletions(-)
-
---- a/arch/mips/lantiq/irq.c
-+++ b/arch/mips/lantiq/irq.c
-@@ -327,12 +327,12 @@ void __init arch_init_irq(void)
- panic("Failed to remap eiu memory\n");
- }
-
-- /* make sure all irqs are turned off by default */
-- for (i = 0; i < 5; i++)
-+ for (i = 0; i < 5; i++) {
-+ /* make sure all irqs are turned off by default */
- ltq_icu_w32(0, LTQ_ICU_IM0_IER + (i * LTQ_ICU_OFFSET));
--
-- /* clear all possibly pending interrupts */
-- ltq_icu_w32(~0, LTQ_ICU_IM0_ISR + (i * LTQ_ICU_OFFSET));
-+ /* clear all possibly pending interrupts */
-+ ltq_icu_w32(~0, LTQ_ICU_IM0_ISR + (i * LTQ_ICU_OFFSET));
-+ }
-
- mips_cpu_irq_init();
-
--- /dev/null
+From a843a038cefffbad99e2fc3e95b0f72e6cd28124 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 23 Mar 2012 11:28:22 +0100
+Subject: [PATCH 68/73] MIPS: lantiq: adds USB_ARCH_HAS_HCD to CONFIG_LANTIQ
+
+---
+ arch/mips/Kconfig | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index 12ee3df..81b22c1 100644
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -229,6 +229,7 @@ config LANTIQ
+ select CLKDEV_LOOKUP
+ select HAVE_OPROFILE
+ select MIPS_MACHINE
++ select USB_ARCH_HAS_HCD
+
+ config LASAT
+ bool "LASAT Networks platforms"
+--
+1.7.9.1
+
+++ /dev/null
-From 091358d0004ae2d2a28c9132e6976d46cf96fd3e Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 21 Mar 2012 14:17:37 +0100
-Subject: [PATCH 68/70] MIPS: lantiq: adds bootsel helper
-
----
- .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 12 ++++++++++++
- arch/mips/lantiq/xway/reset.c | 12 +++++++++++-
- 2 files changed, 23 insertions(+), 1 deletions(-)
-
---- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-@@ -144,6 +144,18 @@
- #define LTQ_MPS_BASE_ADDR (KSEG1 + 0x1F107000)
- #define LTQ_MPS_CHIPID ((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344))
-
-+/* BOOT_SEL - find what boot media we have */
-+#define BS_EXT_ROM 0x0
-+#define BS_FLASH 0x1
-+#define BS_MII0 0x2
-+#define BS_PCI 0x3
-+#define BS_UART1 0x4
-+#define BS_SPI 0x5
-+#define BS_NAND 0x6
-+#define BS_RMII0 0x7
-+
-+extern unsigned char ltq_boot_select(void);
-+
- /* register access macros for EBU and CGU */
- #define ltq_ebu_w32(x, y) ltq_w32((x), ltq_ebu_membase + (y))
- #define ltq_ebu_r32(x) ltq_r32(ltq_ebu_membase + (x))
---- a/arch/mips/lantiq/xway/reset.c
-+++ b/arch/mips/lantiq/xway/reset.c
-@@ -27,7 +27,11 @@
- #define RCU_RST_STAT 0x0014
-
- /* reset cause */
--#define RCU_STAT_SHIFT 26
-+#define RCU_STAT_SHIFT 26
-+/* boot selection */
-+#define RCU_BOOT_SEL_SHIFT 26
-+#define RCU_BOOT_SEL_MASK 0x7
-+
- /* Global SW Reset */
- #define RCU_RD_SRST BIT(30)
- /* Memory Controller */
-@@ -75,6 +79,12 @@ int ltq_reset_cause(void)
- }
- EXPORT_SYMBOL_GPL(ltq_reset_cause);
-
-+unsigned char ltq_boot_select(void)
-+{
-+ u32 val = ltq_rcu_r32(RCU_RST_STAT);
-+ return (val >> RCU_BOOT_SEL_SHIFT) & RCU_BOOT_SEL_MASK;
-+}
-+
- void ltq_reset_once(unsigned int module, ulong usec)
- {
- ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | module, RCU_RST_REQ);
+++ /dev/null
-From 749d1baf548fda72bb1a74b7653415a63b00e8a0 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 23 Mar 2012 11:28:22 +0100
-Subject: [PATCH 69/70] MIPS: lantiq: adds USB_ARCH_HAS_HCD to CONFIG_LANTIQ
-
----
- arch/mips/Kconfig | 1 +
- 1 files changed, 1 insertions(+), 0 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -229,6 +229,7 @@ config LANTIQ
- select CLKDEV_LOOKUP
- select HAVE_OPROFILE
- select MIPS_MACHINE
-+ select USB_ARCH_HAS_HCD
-
- config LASAT
- bool "LASAT Networks platforms"
--- /dev/null
+From 2690917f28c385dd3edf0e2b92dc6b44a1b3dd12 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 5 Apr 2012 21:51:05 +0200
+Subject: [PATCH 69/73] MIPS: lantiq: fixes bad PMU_USB0(0) define
+
+---
+ arch/mips/lantiq/xway/sysctrl.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+index 3672fc6..5807456 100644
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -40,7 +40,7 @@
+ #define PMU_USB0_P BIT(0)
+ #define PMU_PCI BIT(4)
+ #define PMU_DMA BIT(5)
+-#define PMU_USB0 BIT(5)
++#define PMU_USB0 BIT(6)
+ #define PMU_EPHY BIT(7) /* ase */
+ #define PMU_SPI BIT(8)
+ #define PMU_DFE BIT(9)
+--
+1.7.9.1
+
--- /dev/null
+From 6c2374c768e0eacba197e242e8793d93846dc762 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 11 Apr 2012 18:43:50 +0200
+Subject: [PATCH 70/73] MIPS: lantiq: fix dwc_otg usb for ase
+
+changed irq number and pmu settings. little bit of fiddling to get the now variable
+irq into resources.
+
+Signed-off-by: Conor O'Gorman <i@conorogorman.net>
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_irq.h | 1 +
+ drivers/usb/dwc_otg/dwc_otg_driver.c | 3 +++
+ drivers/usb/dwc_otg/dwc_otg_ifx.c | 5 ++++-
+ 3 files changed, 8 insertions(+), 1 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
+index b7f10e6..d9c892b 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
+@@ -36,6 +36,7 @@
+
+ #define LTQ_TIMER6_INT (INT_NUM_IM1_IRL0 + 23)
+ #define LTQ_USB_INT (INT_NUM_IM1_IRL0 + 22)
++#define LTQ_USB_ASE_INT (INT_NUM_IM0_IRL0 + 31)
+ #define LTQ_USB_OC_INT (INT_NUM_IM4_IRL0 + 23)
+
+ #define MIPS_CPU_TIMER_IRQ 7
+diff --git a/drivers/usb/dwc_otg/dwc_otg_driver.c b/drivers/usb/dwc_otg/dwc_otg_driver.c
+index 1b0daab..5c64ebb 100644
+--- a/drivers/usb/dwc_otg/dwc_otg_driver.c
++++ b/drivers/usb/dwc_otg/dwc_otg_driver.c
+@@ -860,6 +860,9 @@ static int __init dwc_otg_init(void)
+
+ printk(KERN_INFO "%s: version %s\n", dwc_driver_name, DWC_DRIVER_VERSION);
+
++ if (ltq_is_ase())
++ dwc_irq = LTQ_USB_ASE_INT;
++
+ // ifxmips setup
+ retval = ifx_usb_hc_init(dwc_iomem_base, dwc_irq);
+ if (retval < 0)
+diff --git a/drivers/usb/dwc_otg/dwc_otg_ifx.c b/drivers/usb/dwc_otg/dwc_otg_ifx.c
+index 0a4c209..e45da85 100644
+--- a/drivers/usb/dwc_otg/dwc_otg_ifx.c
++++ b/drivers/usb/dwc_otg/dwc_otg_ifx.c
+@@ -61,7 +61,10 @@ void dwc_otg_power_on (void)
+ // clear power
+ writel(readl(DANUBE_PMU_PWDCR) | 0x41, DANUBE_PMU_PWDCR);
+ // set clock gating
+- writel(readl(DANUBE_CGU_IFCCR) | 0x30, DANUBE_CGU_IFCCR);
++ if (ltq_is_ase())
++ writel(readl(DANUBE_CGU_IFCCR) & ~0x20, DANUBE_CGU_IFCCR);
++ else
++ writel(readl(DANUBE_CGU_IFCCR) | 0x30, DANUBE_CGU_IFCCR);
+ // set power
+ writel(readl(DANUBE_PMU_PWDCR) & ~0x1, DANUBE_PMU_PWDCR);
+ writel(readl(DANUBE_PMU_PWDCR) & ~0x40, DANUBE_PMU_PWDCR);
+--
+1.7.9.1
+
--- /dev/null
+From d8e3038c520ea6c7619d3f5339c47ca0c2aa7fe3 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Wed, 11 Apr 2012 18:47:53 +0200
+Subject: [PATCH 71/73] MIPS: lantiq: stp, fix for ase, add get, clock
+ disabled
+
+Lantiq serial-to-parallel hardware gpio module
+Added gpio pins as used for amazon se (ase)
+Added get to enable reporting of gpio status
+Changed to use software update, as hw clock was not running on ase. Clock
+really only needed if hw flashing was implemented.
+
+Signed-off-by: Conor O'Gorman <i@conorogorman.net>
+---
+ arch/mips/lantiq/xway/gpio_stp.c | 22 +++++++++++++---------
+ 1 files changed, 13 insertions(+), 9 deletions(-)
+
+diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
+index 9610c10..791beeb 100644
+--- a/arch/mips/lantiq/xway/gpio_stp.c
++++ b/arch/mips/lantiq/xway/gpio_stp.c
+@@ -27,6 +27,7 @@
+ #define LTQ_STP_AR 0x10
+
+ #define LTQ_STP_CON_SWU (1 << 31)
++#define LTQ_STP_SWU_MASK (1 << 31)
+ #define LTQ_STP_2HZ 0
+ #define LTQ_STP_4HZ (1 << 23)
+ #define LTQ_STP_8HZ (2 << 23)
+@@ -60,6 +61,12 @@ static void ltq_stp_set(struct gpio_chip *chip, unsigned offset, int value)
+ else
+ ltq_stp_shadow &= ~(1 << offset);
+ ltq_stp_w32(ltq_stp_shadow, LTQ_STP_CPU0);
++ ltq_stp_w32_mask(LTQ_STP_SWU_MASK, LTQ_STP_CON_SWU, LTQ_STP_CON0);
++}
++
++static int ltq_stp_get(struct gpio_chip *chip, unsigned offset)
++{
++ return !!(ltq_stp_r32(LTQ_STP_CPU0) & (1<<offset));
+ }
+
+ static int ltq_stp_direction_output(struct gpio_chip *chip, unsigned offset,
+@@ -74,6 +81,7 @@ static struct gpio_chip ltq_stp_chip = {
+ .label = "ltq_stp",
+ .direction_output = ltq_stp_direction_output,
+ .set = ltq_stp_set,
++ .get = ltq_stp_get,
+ .base = 200,
+ .ngpio = 24,
+ .owner = THIS_MODULE,
+@@ -97,12 +105,6 @@ static int ltq_stp_hw_init(struct device *dev)
+ ltq_stp_w32_mask(0, LTQ_STP_GROUP0 | LTQ_STP_GROUP1 | LTQ_STP_GROUP2,
+ LTQ_STP_CON1);
+
+- /* stp are update periodically by the FPI bus */
+- ltq_stp_w32_mask(LTQ_STP_UPD_MASK, LTQ_STP_UPD_FPI, LTQ_STP_CON1);
+-
+- /* set stp update speed */
+- ltq_stp_w32_mask(LTQ_STP_SPEED_MASK, LTQ_STP_8HZ, LTQ_STP_CON1);
+-
+ /* tell the hardware that pin (led) 0 and 1 are controlled
+ * by the dsl arc
+ */
+@@ -118,6 +120,7 @@ static int __devinit ltq_stp_probe(struct platform_device *pdev)
+ {
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ int ret = 0;
++ int pin;
+
+ if (!res)
+ return -ENOENT;
+@@ -135,9 +138,10 @@ static int __devinit ltq_stp_probe(struct platform_device *pdev)
+ }
+
+ /* the 3 pins used to control the external stp */
+- if (ltq_gpio_request(&pdev->dev, 4, 2, 1, "stp-st") ||
+- ltq_gpio_request(&pdev->dev, 5, 2, 1, "stp-d") ||
+- ltq_gpio_request(&pdev->dev, 6, 2, 1, "stp-sh")) {
++ pin = ltq_is_ase() ? 1 : 4;
++ if (ltq_gpio_request(&pdev->dev, pin, 2, 1, "stp-st") ||
++ ltq_gpio_request(&pdev->dev, pin+1, 2, 1, "stp-d") ||
++ ltq_gpio_request(&pdev->dev, pin+2, 2, 1, "stp-sh")) {
+ dev_err(&pdev->dev, "failed to request needed gpios\n");
+ return -EBUSY;
+ }
+--
+1.7.9.1
+
--- /dev/null
+From d1cd860adbd87c42c90db1c5658cf10ed1dbdd3e Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Thu, 12 Apr 2012 13:25:42 +0200
+Subject: [PATCH 72/73] MIPS: lantiq: fix spi for ase, update for clkdev and
+ platform driver
+
+irqs, gpios, chipselects
+updated to use module_platform_driver()
+clkdev is a bit hacky, using ltq_spi.0, as specifying no device numbering led to
+the mtd driver not hooking up to an spi flash.
+
+Signed-off-by: Conor O'Gorman <i@conorogorman.net>
+---
+ .../mips/include/asm/mach-lantiq/xway/lantiq_irq.h | 4 ++
+ arch/mips/lantiq/xway/sysctrl.c | 2 +-
+ drivers/spi/spi-xway.c | 58 ++++++++++----------
+ 3 files changed, 35 insertions(+), 29 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
+index d9c892b..d86acdd 100644
+--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
+@@ -30,6 +30,10 @@
+ #define LTQ_SSC_TIR_AR9 (INT_NUM_IM0_IRL0 + 14)
+ #define LTQ_SSC_RIR_AR9 (INT_NUM_IM0_IRL0 + 15)
+ #define LTQ_SSC_EIR (INT_NUM_IM0_IRL0 + 16)
++#define LTQ_SSC_RIR_ASE (INT_NUM_IM0_IRL0 + 16)
++#define LTQ_SSC_TIR_ASE (INT_NUM_IM0_IRL0 + 17)
++#define LTQ_SSC_EIR_ASE (INT_NUM_IM0_IRL0 + 18)
++#define LTQ_SSC_FIR_ASE (INT_NUM_IM0_IRL0 + 19)
+
+ #define LTQ_MEI_DYING_GASP_INT (INT_NUM_IM1_IRL0 + 21)
+ #define LTQ_MEI_INT (INT_NUM_IM1_IRL0 + 23)
+diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
+index 5807456..de4ce8f 100644
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -233,7 +233,7 @@ void __init ltq_soc_init(void)
+ clkdev_add_pmu("ltq_fpi", NULL, 0, PMU_FPI);
+ clkdev_add_pmu("ltq_dma", NULL, 0, PMU_DMA);
+ clkdev_add_pmu("ltq_stp", NULL, 0, PMU_STP);
+- clkdev_add_pmu("ltq_spi", NULL, 0, PMU_SPI);
++ clkdev_add_pmu("ltq_spi.0", NULL, 0, PMU_SPI);
+ clkdev_add_pmu("ltq_gptu", NULL, 0, PMU_GPT);
+ clkdev_add_pmu("ltq_ebu", NULL, 0, PMU_EBU);
+ if (!ltq_is_vr9())
+diff --git a/drivers/spi/spi-xway.c b/drivers/spi/spi-xway.c
+index 016a6d0..be5c25b 100644
+--- a/drivers/spi/spi-xway.c
++++ b/drivers/spi/spi-xway.c
+@@ -143,9 +143,9 @@
+ #define LTQ_SPI_IRNEN_ALL 0xF
+
+ /* Hard-wired GPIOs used by SPI controller */
+-#define LTQ_SPI_GPIO_DI 16
+-#define LTQ_SPI_GPIO_DO 17
+-#define LTQ_SPI_GPIO_CLK 18
++#define LTQ_SPI_GPIO_DI (ltq_is_ase()? 8 : 16)
++#define LTQ_SPI_GPIO_DO (ltq_is_ase()? 9 : 17)
++#define LTQ_SPI_GPIO_CLK (ltq_is_ase()? 10 : 18)
+
+ struct ltq_spi {
+ struct spi_bitbang bitbang;
+@@ -229,7 +229,7 @@ static void ltq_spi_hw_enable(struct ltq_spi *hw)
+ u32 clc;
+
+ /* Power-up mdule */
+- clk_enable(hw->spiclk);
++ clk_enable(hw->spiclk);
+
+ /*
+ * Set clock divider for run mode to 1 to
+@@ -245,7 +245,7 @@ static void ltq_spi_hw_disable(struct ltq_spi *hw)
+ ltq_spi_reg_write(hw, LTQ_SPI_CLC_DISS, LTQ_SPI_CLC);
+
+ /* Power-down mdule */
+- clk_disable(hw->spiclk);
++ clk_disable(hw->spiclk);
+ }
+
+ static void ltq_spi_reset_fifos(struct ltq_spi *hw)
+@@ -284,7 +284,7 @@ static inline int ltq_spi_wait_ready(struct ltq_spi *hw)
+ cond_resched();
+ } while (!time_after_eq(jiffies, timeout));
+
+- dev_err(hw->dev, "SPI wait ready timed out\n");
++ dev_err(hw->dev, "SPI wait ready timed out stat: %x\n", stat);
+
+ return -ETIMEDOUT;
+ }
+@@ -556,6 +556,12 @@ static const struct ltq_spi_cs_gpio_map ltq_spi_cs[] = {
+ { 11, 3 },
+ };
+
++static const struct ltq_spi_cs_gpio_map ltq_spi_cs_ase[] = {
++ { 7, 2 },
++ { 15, 1 },
++ { 14, 1 },
++};
++
+ static int ltq_spi_setup(struct spi_device *spi)
+ {
+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
+@@ -600,8 +606,10 @@ static int ltq_spi_setup(struct spi_device *spi)
+ cstate->cs_activate = ltq_spi_gpio_cs_activate;
+ cstate->cs_deactivate = ltq_spi_gpio_cs_deactivate;
+ } else {
+- ret = ltq_gpio_request(&spi->dev, ltq_spi_cs[spi->chip_select].gpio,
+- ltq_spi_cs[spi->chip_select].mux,
++ struct ltq_spi_cs_gpio_map *cs_map =
++ ltq_is_ase() ? ltq_spi_cs_ase : ltq_spi_cs;
++ ret = ltq_gpio_request(&spi->dev, cs_map[spi->chip_select].gpio,
++ cs_map[spi->chip_select].mux,
+ 1, "spi-cs");
+ if (ret)
+ return -EBUSY;
+@@ -633,7 +641,8 @@ static void ltq_spi_cleanup(struct spi_device *spi)
+ if (cdata && cdata->gpio)
+ gpio = cdata->gpio;
+ else
+- gpio = ltq_spi_cs[spi->chip_select].gpio;
++ gpio = ltq_is_ase() ? ltq_spi_cs_ase[spi->chip_select].gpio :
++ ltq_spi_cs[spi->chip_select].gpio;
+
+ gpio_free(gpio);
+ kfree(cstate);
+@@ -868,7 +877,8 @@ static const struct ltq_spi_irq_map ltq_spi_irqs[] = {
+ { "spi_err", ltq_spi_err_irq },
+ };
+
+-static int __init ltq_spi_probe(struct platform_device *pdev)
++static int __devinit
++ltq_spi_probe(struct platform_device *pdev)
+ {
+ struct spi_master *master;
+ struct resource *r;
+@@ -910,14 +920,14 @@ static int __init ltq_spi_probe(struct platform_device *pdev)
+
+ hw->fpiclk = clk_get_fpi();
+ if (IS_ERR(hw->fpiclk)) {
+- dev_err(&pdev->dev, "clk_get\n");
++ dev_err(&pdev->dev, "fpi clk\n");
+ ret = PTR_ERR(hw->fpiclk);
+ goto err_master;
+ }
+
+ hw->spiclk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(hw->spiclk)) {
+- dev_err(&pdev->dev, "clk_get\n");
++ dev_err(&pdev->dev, "spi clk\n");
+ ret = PTR_ERR(hw->spiclk);
+ goto err_master;
+ }
+@@ -1014,7 +1024,8 @@ err:
+ return ret;
+ }
+
+-static int __exit ltq_spi_remove(struct platform_device *pdev)
++static int __devexit
++ltq_spi_remove(struct platform_device *pdev)
+ {
+ struct ltq_spi *hw = platform_get_drvdata(pdev);
+ int ret, i;
+@@ -1043,24 +1054,15 @@ static int __exit ltq_spi_remove(struct platform_device *pdev)
+ }
+
+ static struct platform_driver ltq_spi_driver = {
++ .probe = ltq_spi_probe,
++ .remove = __devexit_p(ltq_spi_remove),
+ .driver = {
+- .name = "ltq_spi",
+- .owner = THIS_MODULE,
+- },
+- .remove = __exit_p(ltq_spi_remove),
++ .name = "ltq_spi",
++ .owner = THIS_MODULE,
++ },
+ };
+
+-static int __init ltq_spi_init(void)
+-{
+- return platform_driver_probe(<q_spi_driver, ltq_spi_probe);
+-}
+-module_init(ltq_spi_init);
+-
+-static void __exit ltq_spi_exit(void)
+-{
+- platform_driver_unregister(<q_spi_driver);
+-}
+-module_exit(ltq_spi_exit);
++module_platform_driver(ltq_spi_driver);
+
+ MODULE_DESCRIPTION("Lantiq SoC SPI controller driver");
+ MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>");
+--
+1.7.9.1
+
/*
* This function, given a master MTD object and a partition table, creates
* and registers slave MTD objects which are bound to the master according to
+@@ -890,7 +1053,7 @@ int add_mtd_partitions(struct mtd_info *
+ struct mtd_part *slave;
+ uint64_t cur_offset = 0;
+ int i;
+-#ifdef CONFIG_MTD_ROOTFS_SPLIT
++#if defined(CONFIG_MTD_ROOTFS_SPLIT) || defined(CONFIG_MTD_UIMAGE_SPLIT)
+ int ret;
+ #endif
+
@@ -907,6 +1070,17 @@ int add_mtd_partitions(struct mtd_info *
add_mtd_device(&slave->mtd);
#include <asm/bootinfo.h>
#include <asm/irq.h>
-@@ -119,3 +120,84 @@ ltq_register_vrx200(struct ltq_eth_data
+@@ -119,3 +120,97 @@ ltq_register_vrx200(struct ltq_eth_data
ltq_vrx200.dev.platform_data = eth;
platform_device_register(<q_vrx200);
}
+ IRQ_RES(spi_err, LTQ_SSC_EIR),
+};
+
++static struct resource ltq_spi_resources_ase[] = {
++ {
++ .start = LTQ_SSC_BASE_ADDR,
++ .end = LTQ_SSC_BASE_ADDR + LTQ_SSC_SIZE - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ_RES(spi_tx, LTQ_SSC_TIR_ASE),
++ IRQ_RES(spi_rx, LTQ_SSC_RIR_ASE),
++ IRQ_RES(spi_err, LTQ_SSC_EIR_ASE),
++};
++
+static struct platform_device ltq_spi = {
-+ .name = "ltq-spi",
++ .name = "ltq_spi",
+ .resource = ltq_spi_resources,
+ .num_resources = ARRAY_SIZE(ltq_spi_resources),
+};
+void __init ltq_register_spi(struct ltq_spi_platform_data *pdata,
+ struct spi_board_info const *info, unsigned n)
+{
-+ if(ltq_is_ar9())
++ if (ltq_is_ar9())
+ ltq_spi.resource = ltq_spi_resources_ar9;
++ else if (ltq_is_ase())
++ ltq_spi.resource = ltq_spi_resources_ase;
+ spi_register_board_info(info, n);
+ ltq_spi.dev.platform_data = pdata;
+ platform_device_register(<q_spi);
projects / openwrt / staging / hauke.git / commitdiff