*/
#include <linux/clk.h>
-#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
#include <linux/platform_data/atmel.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
#include <mach/hardware.h>
#include <asm/gpio.h>
#include <mach/cpu.h>
-#ifndef CONFIG_ARCH_AT91
-#error "CONFIG_ARCH_AT91 must be defined."
-#endif
+
+#include "ohci.h"
#define valid_port(index) ((index) >= 0 && (index) < AT91_MAX_USBH_PORTS)
#define at91_for_each_port(index) \
/* interface, function and usb clocks; sometimes also an AHB clock */
static struct clk *iclk, *fclk, *uclk, *hclk;
+/* interface and function clocks; sometimes also an AHB clock */
+
+#define DRIVER_DESC "OHCI Atmel driver"
+
+static const char hcd_name[] = "ohci-atmel";
+
+static struct hc_driver __read_mostly ohci_at91_hc_driver;
static int clocked;
+static int (*orig_ohci_hub_control)(struct usb_hcd *hcd, u16 typeReq,
+ u16 wValue, u16 wIndex, char *buf, u16 wLength);
+static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf);
extern int usb_disabled(void);
static int usb_hcd_at91_probe(const struct hc_driver *driver,
struct platform_device *pdev)
{
+ struct at91_usbh_data *board;
+ struct ohci_hcd *ohci;
int retval;
struct usb_hcd *hcd = NULL;
}
}
+ board = hcd->self.controller->platform_data;
+ ohci = hcd_to_ohci(hcd);
+ ohci->num_ports = board->ports;
at91_start_hc(pdev);
- ohci_hcd_init(hcd_to_ohci(hcd));
retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_SHARED);
if (retval == 0)
}
/*-------------------------------------------------------------------------*/
-
-static int
-ohci_at91_reset (struct usb_hcd *hcd)
-{
- struct at91_usbh_data *board = dev_get_platdata(hcd->self.controller);
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- int ret;
-
- if ((ret = ohci_init(ohci)) < 0)
- return ret;
-
- ohci->num_ports = board->ports;
- return 0;
-}
-
-static int
-ohci_at91_start (struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- int ret;
-
- if ((ret = ohci_run(ohci)) < 0) {
- dev_err(hcd->self.controller, "can't start %s\n",
- hcd->self.bus_name);
- ohci_stop(hcd);
- return ret;
- }
- return 0;
-}
-
static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int enable)
{
if (!valid_port(port))
*/
static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf)
{
- struct at91_usbh_data *pdata = dev_get_platdata(hcd->self.controller);
- int length = ohci_hub_status_data(hcd, buf);
+ struct at91_usbh_data *pdata = hcd->self.controller->platform_data;
+ int length = orig_ohci_hub_status_data(hcd, buf);
int port;
at91_for_each_port(port) {
break;
}
- ret = ohci_hub_control(hcd, typeReq, wValue, wIndex + 1, buf, wLength);
+ ret = orig_ohci_hub_control(hcd, typeReq, wValue, wIndex + 1,
+ buf, wLength);
if (ret)
goto out;
/*-------------------------------------------------------------------------*/
-static const struct hc_driver ohci_at91_hc_driver = {
- .description = hcd_name,
- .product_desc = "AT91 OHCI",
- .hcd_priv_size = sizeof(struct ohci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ohci_irq,
- .flags = HCD_USB11 | HCD_MEMORY,
-
- /*
- * basic lifecycle operations
- */
- .reset = ohci_at91_reset,
- .start = ohci_at91_start,
- .stop = ohci_stop,
- .shutdown = ohci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ohci_urb_enqueue,
- .urb_dequeue = ohci_urb_dequeue,
- .endpoint_disable = ohci_endpoint_disable,
-
- /*
- * scheduling support
- */
- .get_frame_number = ohci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ohci_at91_hub_status_data,
- .hub_control = ohci_at91_hub_control,
-#ifdef CONFIG_PM
- .bus_suspend = ohci_bus_suspend,
- .bus_resume = ohci_bus_resume,
-#endif
- .start_port_reset = ohci_start_port_reset,
-};
-
-/*-------------------------------------------------------------------------*/
-
static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
{
struct platform_device *pdev = data;
* REVISIT: some boards will be able to turn VBUS off...
*/
if (at91_suspend_entering_slow_clock()) {
- ohci_usb_reset (ohci);
+ ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
+ ohci->hc_control &= OHCI_CTRL_RWC;
+ ohci_writel(ohci, ohci->hc_control, &ohci->regs->control);
+ ohci->rh_state = OHCI_RH_HALTED;
+
/* flush the writes */
(void) ohci_readl (ohci, &ohci->regs->control);
at91_stop_clock();
#define ohci_hcd_at91_drv_resume NULL
#endif
-MODULE_ALIAS("platform:at91_ohci");
-
static struct platform_driver ohci_hcd_at91_driver = {
.probe = ohci_hcd_at91_drv_probe,
.remove = ohci_hcd_at91_drv_remove,
.of_match_table = of_match_ptr(at91_ohci_dt_ids),
},
};
+
+static int __init ohci_at91_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+ ohci_init_driver(&ohci_at91_hc_driver, NULL);
+
+ /*
+ * The Atmel HW has some unusual quirks, which require Atmel-specific
+ * workarounds. We override certain hc_driver functions here to
+ * achieve that. We explicitly do not enhance ohci_driver_overrides to
+ * allow this more easily, since this is an unusual case, and we don't
+ * want to encourage others to override these functions by making it
+ * too easy.
+ */
+
+ orig_ohci_hub_control = ohci_at91_hc_driver.hub_control;
+ orig_ohci_hub_status_data = ohci_at91_hc_driver.hub_status_data;
+
+ ohci_at91_hc_driver.hub_status_data = ohci_at91_hub_status_data;
+ ohci_at91_hc_driver.hub_control = ohci_at91_hub_control;
+
+ return platform_driver_register(&ohci_hcd_at91_driver);
+}
+module_init(ohci_at91_init);
+
+static void __exit ohci_at91_cleanup(void)
+{
+ platform_driver_unregister(&ohci_hcd_at91_driver);
+}
+module_exit(ohci_at91_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at91_ohci");
projects / openwrt / staging / blogic.git / commitdiff