--- /dev/null
+--[[
+LuCI - Lua Configuration Interface
+
+Copyright 2008 Steven Barth <steven@midlink.org>
+Copyright 2008 Jo-Philipp Wich <xm@leipzig.freifunk.net>
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+$Id$
+]]--
+
+require("luci.sys")
+require("luci.ip")
+
+m = Map("chillispot")
+
+-- tun
+s1 = m:section(TypedSection, "tun")
+s1.anonymous = true
+
+net = s1:option( Value, "net" )
+for _, route in ipairs(luci.sys.net.routes()) do
+ if route.Iface ~= "lo" and route.Mask ~= "FFFFFFFF" then
+ local netmask = luci.ip.IPv4(route.Mask)
+ if netmask then
+ local netaddr = luci.ip.IPv4(route.Destination, netmask)
+ if netaddr then
+ net:value( netaddr:string() )
+ end
+ end
+ end
+end
+
+s1:option( Value, "dynip" ).optional = true
+s1:option( Value, "statip" ).optional = true
+
+s1:option( Value, "dns1" ).optional = true
+s1:option( Value, "dns2" ).optional = true
+s1:option( Value, "domain" ).optional = true
+
+s1:option( Value, "ipup" ).optional = true
+s1:option( Value, "ipdown" ).optional = true
+
+s1:option( Value, "conup" ).optional = true
+s1:option( Value, "condown" ).optional = true
+
+
+-- dhcp config
+s2 = m:section(TypedSection, "dhcp")
+s2.anonymous = true
+
+dif = s2:option( Value, "dhcpif" )
+for _, nif in ipairs(luci.sys.net.devices()) do
+ if nif ~= "lo" then dif:value(nif) end
+end
+
+s2:option( Value, "dhcpmac" ).optional = true
+s2:option( Value, "lease" ).optional = true
+
+
+return m
--- /dev/null
+--[[
+LuCI - Lua Configuration Interface
+
+Copyright 2008 Steven Barth <steven@midlink.org>
+Copyright 2008 Jo-Philipp Wich <xm@leipzig.freifunk.net>
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+$Id$
+]]--
+
+
+m = Map("chillispot")
+
+
+-- uam config
+s1 = m:section(TypedSection, "uam")
+s1.anonymous = true
+
+s1:option( Value, "uamserver" )
+s1:option( Value, "uamsecret" ).password = true
+s1:option( Flag, "uamanydns" )
+s1:option( Value, "uamhomepage" ).optional = true
+s1:option( Value, "uamlisten" ).optional = true
+s1:option( Value, "uamport" ).optional = true
+s1:option( DynamicList, "uamallowed" ).optional = true
+
+
+-- radius server
+s2 = m:section(TypedSection, "radius")
+s2.anonymous = true
+
+s2:option( Value, "radiusserver1" )
+s2:option( Value, "radiusserver2" )
+s2:option( Value, "radiussecret" ).password = true
+
+s2:option( Value, "radiuslisten" ).optional = true
+s2:option( Value, "radiusauthport" ).optional = true
+s2:option( Value, "radiusacctport" ).optional = true
+
+s2:option( Value, "radiusnasid" ).optional = true
+s2:option( Value, "radiusnasip" ).optional = true
+
+s2:option( Value, "radiuscalled" ).optional = true
+s2:option( Value, "radiuslocationid" ).optional = true
+s2:option( Value, "radiuslocationname" ).optional = true
+
+
+-- radius proxy
+s3 = m:section(TypedSection, "proxy")
+s3.anonymous = true
+
+s3:option( Value, "proxylisten" ).optional = true
+s3:option( Value, "proxyport" ).optional = true
+s3:option( Value, "proxyclient" ).optional = true
+ps = s3:option( Value, "proxysecret" )
+ps.optional = true
+ps.password = true
+
+return m
--- /dev/null
+##############################################################################
+#
+# Sample ChilliSpot configuration file
+#
+##############################################################################
+
+# General settings
+config general
+
+ # Enable this flag to include debug information.
+ option debug 0
+
+ # Re-read configuration file at this interval. Will also cause new domain
+ # name lookups to be performed. Value is given in seconds.
+ option interval 3600
+
+ # File to store information about the process id of the program.
+ # The program must have write access to this file/directory.
+ option pidfile /var/run/chilli.pid
+
+ # Directory to use for nonvolatile storage.
+ # The program must have write access to this directory.
+ # This tag is currently ignored
+ #option statedir ./
+
+
+# Remote configuration management
+config remoteconfig
+
+ # If confusername is specified together with confpassword chillispot
+ # will at regular intervals specified by the interval option query the
+ # radius server for configuration information.
+ # Normally you do not need to uncomment this tag.
+ option confusername ""
+
+ # If confusername is specified together with confpassword chillispot
+ # will at regular intervals specified by the interval option query the
+ # radius server for configuration information.
+ # Normally you do not need to uncomment this tag.
+ option confpassword ""
+
+
+# TUN parameters
+config tun
+
+ # IP network address of external packet data network
+ # Used to allocate dynamic IP addresses and set up routing.
+ # Normally you do not need to uncomment this tag.
+ option net 192.168.182.0/24
+
+ # Dynamic IP address pool
+ # Used to allocate dynamic IP addresses to clients.
+ # If not set it defaults to the net tag.
+ # Do not uncomment this tag unless you are an experienced user!
+ #option dynip 192.168.182.0/24
+
+ # Static IP address pool
+ # Used to allocate static IP addresses to clients.
+ # Do not uncomment this tag unless you are an experienced user!
+ #option statip 192.168.182.0/24
+
+ # Primary DNS server.
+ # Will be suggested to the client.
+ # If omitted the system default will be used.
+ # Normally you do not need to uncomment this tag.
+ #option dns1 172.16.0.5
+
+ # Secondary DNS server.
+ # Will be suggested to the client.
+ # If omitted the system default will be used.
+ # Normally you do not need to uncomment this tag.
+ #option dns2 172.16.0.6
+
+ # Domain name
+ # Will be suggested to the client.
+ # Normally you do not need to uncomment this tag.
+ option domain key.chillispot.org
+
+ # Script executed after network interface has been brought up.
+ # Executed with the following parameters: <devicename> <ip address> <mask>
+ # Normally you do not need to uncomment this tag.
+ #option ipup /etc/chilli.ipup
+
+ # Script executed after network interface has been taken down.
+ # Executed with the following parameters: <devicename> <ip address> <mask>
+ # Normally you do not need to uncomment this tag.
+ #option ipdown /etc/chilli.ipdown
+
+ # Script executed after a user has been authenticated.
+ # Executed with the following parameters: <devicename> <ip address>
+ # <mask> <user ip address> <user mac address> <filter ID>
+ # Normally you do not need to uncomment this tag.
+ #option conup /etc/chilli.conup
+
+ # Script executed after a user has disconnected.
+ # Executed with the following parameters: <devicename> <ip address>
+ # <mask> <user ip address> <user mac address> <filter ID>
+ # Normally you do not need to uncomment this tag.
+ #option condown /etc/chilli.condown
+
+
+# DHCP Parameters
+config dhcp
+
+ # Ethernet interface to listen to.
+ # This is the network interface which is connected to the access points.
+ # In a typical configuration this tag should be set to eth1.
+ option dhcpif eth1
+
+ # Use specified MAC address.
+ # An address in the range 00:00:5E:00:02:00 - 00:00:5E:FF:FF:FF falls
+ # within the IANA range of addresses and is not allocated for other
+ # purposes.
+ # Normally you do not need to uncomment this tag.
+ #option dhcpmac 00:00:5E:00:02:00
+
+ # Time before DHCP lease expires
+ # Normally you do not need to uncomment this tag.
+ #option lease 600
+
+
+# Radius parameters
+config radius
+
+ # IP address to listen to
+ # Normally you do not need to uncomment this tag.
+ #option radiuslisten 127.0.0.1
+
+ # IP address of radius server 1
+ # For most installations you need to modify this tag.
+ option radiusserver1 rad01.chillispot.org
+
+ # IP address of radius server 2
+ # If you have only one radius server you should set radiusserver2 to the
+ # same value as radiusserver1.
+ # For most installations you need to modify this tag.
+ option radiusserver2 rad02.chillispot.org
+
+ # Radius authentication port
+ # The UDP port number to use for radius authentication requests.
+ # The same port number is used for both radiusserver1 and radiusserver2.
+ # Normally you do not need to uncomment this tag.
+ #option radiusauthport 1812
+
+ # Radius accounting port
+ # The UDP port number to use for radius accounting requests.
+ # The same port number is used for both radiusserver1 and radiusserver2.
+ # Normally you do not need to uncomment this tag.
+ #option radiusacctport 1813
+
+ # Radius shared secret for both servers
+ # For all installations you should modify this tag.
+ #option radiussecret testing123
+
+ # Radius NAS-Identifier
+ # Normally you do not need to uncomment this tag.
+ #option radiusnasid nas01
+
+ # Radius NAS-IP-Address
+ # Normally you do not need to uncomment this tag.
+ #option radiusnasip 127.0.0.1
+
+ # Radius Called-Station-ID
+ # Normally you do not need to uncomment this tag.
+ #option radiuscalled 00133300
+
+ # WISPr Location ID. Should be in the format: isocc=<ISO_Country_Code>,
+ # cc=<E.164_Country_Code>,ac=<E.164_Area_Code>,network=<ssid/ZONE>
+ # Normally you do not need to uncomment this tag.
+ #option radiuslocationid isocc=us,cc=1,ac=408,network=ACMEWISP_NewarkAirport
+
+ # WISPr Location Name. Should be in the format:
+ # <HOTSPOT_OPERATOR_NAME>,<LOCATION>
+ # Normally you do not need to uncomment this tag.
+ #option radiuslocationname ACMEWISP,Gate_14_Terminal_C_of_Newark_Airport
+
+
+# Radius proxy parameters
+config proxy
+
+ # IP address to listen to
+ # Normally you do not need to uncomment this tag.
+ #option proxylisten 10.0.0.1
+
+ # UDP port to listen to.
+ # If not specified a port will be selected by the system
+ # Normally you do not need to uncomment this tag.
+ #option proxyport 1645
+
+ # Client(s) from which we accept radius requests
+ # Normally you do not need to uncomment this tag.
+ #option proxyclient 10.0.0.1/24
+
+ # Radius proxy shared secret for all clients
+ # If not specified defaults to radiussecret
+ # Normally you do not need to uncomment this tag.
+ #option proxysecret testing123
+
+
+# Universal access method (UAM) parameters
+config uam
+
+ # URL of web server handling authentication.
+ option uamserver https://radius.chillispot.org/hotspotlogin
+
+ # URL of welcome homepage.
+ # Unauthenticated users will be redirected to this URL. If not specified
+ # users will be redirected to the uamserver instead.
+ # Normally you do not need to uncomment this tag.
+ #option uamhomepage http://192.168.182.1/welcome.html
+
+ # Shared between chilli and authentication web server
+ #option uamsecret ht2eb8ej6s4et3rg1ulp
+
+ # IP address to listen to for authentication requests
+ # Do not uncomment this tag unless you are an experienced user!
+ #option uamlisten 192.168.182.1
+
+ # TCP port to listen to for authentication requests
+ # Do not uncomment this tag unless you are an experienced user!
+ #option uamport 3990
+
+ # Comma separated list of domain names, IP addresses or network segments
+ # the client can access without first authenticating.
+ # It is possible to specify this tag multiple times.
+ # Normally you do not need to uncomment this tag.
+ #list uamallowed www.chillispot.org
+ #list uamallowed 10.11.12.0/24
+
+ # If this flag is given unauthenticated users are allowed to use
+ # any DNS server.
+ # Normally you do not need to uncomment this tag.
+ #uamanydns
+
+
+# MAC authentication
+config macauth
+
+ # If this flag is given users will be authenticated only on their MAC
+ # address.
+ # Normally you do not need to enable this flag.
+ option macauth 0
+
+ # List of MAC addresses.
+ # The MAC addresses specified in this list will be authenticated only on
+ # their MAC address.
+ # This tag is ignored if the macauth tag is given.
+ # It is possible to specify this tag multiple times.
+ # Normally you do not need to uncomment this tag.
+ #list macallowed 00-0A-5E-AC-BE-51
+ #list macallowed 00-30-1B-3C-32-E9
+
+ # Password to use for MAC authentication.
+ # Normally you do not need to uncomment this tag.
+ #option macpasswd password
+
+ # Suffix to add to MAC address in order to form the username.
+ # Normally you do not need to uncomment this tag.
+ #option macsuffix suffix
projects / project / luci.git / commitdiff