[POWERPC] MPC8349E-mITX: Vitesse 7385 PHY is not connected to the MDIO bus

...thus use fixed-link to register proper "Fixed PHY"

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index a14399b61fa9cbe04ca7230fbd9185c0213fdb23..04b8da4deb6059247162bd888799f1cb928daf25 100644 (file)
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -125,14 +125,6 @@
                                reg = <1c>;
                                device_type = "ethernet-phy";
                        };
-
-                       /* Vitesse 7385 */
-                       phy1f: ethernet-phy@1f {
-                               interrupt-parent = < &ipic >;
-                               interrupts = <12 8>;
-                               reg = <1f>;
-                               device_type = "ethernet-phy";
-                       };
                };
 
                enet0: ethernet@24000 {
@@ -157,7 +149,8 @@
                        local-mac-address = [ 00 00 00 00 00 00 ];
                        interrupts = <23 8 24 8 25 8>;
                        interrupt-parent = < &ipic >;
-                       phy-handle = < &phy1f >;
+                       /* Vitesse 7385 isn't on the MDIO bus */
+                       fixed-link = <1 1 d#1000 0 0>;
                        linux,network-index = <1>;
                };