arm: Add CONFIG_DISPLAY_BOARDINFO_LATE to display board info on LCD

This option displays board info after stdio is running, so that it will
appear on the LCD. If it is displayed earlier, the board info will appear
on the serial console but not on the LCD.

Here follows a blow-by-blow description.

1a. Without CONFIG_DISPLAY_BOARDINFO_LATE, on serial:

U-Boot 2011.12-02550-g037e1c5-dirty (Nov 15 2012 - 14:29:42) for SMDK5250

CPU:   S5PC520 @ 1700MHz

Board: Google Snow, rev 0
I2C:   ready
DRAM:  2 GiB Elpida DDR3 @ 800MHz
MMC:   S5P MSHC0: 0, S5P MSHC1: 1
SF: Detected W25Q32 with page size 4 KiB, total 4 MiB
*** Warning - bad CRC, using default environment

In:    mkbp-keyb
Out:   lcd
Err:   lcd
Net:   No ethernet found.
Hit any key to stop autoboot:  0
SMDK5250 #

1b. Without CONFIG_DISPLAY_BOARDINFO_LATE, on LCD (note machine info
is missing):

In:    mkbp-keyb
Out:   lcd
Err:   lcd
Net:   No ethernet found.
Hit any key to stop autoboot:  0
SMDK5250 #

2a. With CONFIG_DISPLAY_BOARDINFO_LATE, on serial:

U-Boot 2011.12-02550-g037e1c5 (Nov 15 2012 - 14:27:40) for SMDK5250

CPU:   S5PC520 @ 1700MHz
I2C:   ready
DRAM:  2 GiB Elpida DDR3 @ 800MHz
MMC:   S5P MSHC0: 0, S5P MSHC1: 1
SF: Detected W25Q32 with page size 4 KiB, total 4 MiB
*** Warning - bad CRC, using default environment

Model: Google Snow
In:    mkbp-keyb
Out:   lcd
Err:   lcd
Net:   No ethernet found.
Hit any key to stop autoboot:  0
SMDK5250 #

2b. With CONFIG_DISPLAY_BOARDINFO_LATE, on LCD (note machine info is present):

Model: Google Snow
In:    mkbp-keyb
Out:   lcd
Err:   lcd
Net:   No ethernet found.
Hit any key to stop autoboot:  0
SMDK5250 #

Since the LCD is all that a typical user sees, it is useful to display
the model there.

We may be able to rearrange things some other way one day, but at
present this seems like a convenient way of getting the required
behaviour.

Signed-off-by: Simon Glass <sjg@chromium.org>

diff --git a/README b/README
index d57ee91ca3b5fdd9406febd29bf5d088fc7e6106..9c261680d4d43dcd215d45e28d80741a70fd13eb 100644 (file)
--- a/README
+++ b/README
@@ -3462,6 +3462,11 @@ use the "saveenv" command to store a valid environment.
                when U-Boot starts up. The board function checkboard() is called
                to do this.
 
+- CONFIG_DISPLAY_BOARDINFO_LATE
+               Similar to the previous option, but display this information
+               later, once stdio is running and output goes to the LCD, if
+               present.
+
 Low Level (hardware related) configuration options:
 ---------------------------------------------------
 

diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index a1eb7993ad8dc4d29727db1e18759a480646128a..ec5c35f13125afc9c4f74a51ac233a4d084a8e1f 100644 (file)
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -489,6 +489,16 @@ static int should_load_env(void)
 #endif
 }
 
+#if defined(CONFIG_DISPLAY_BOARDINFO_LATE) && defined(CONFIG_OF_CONTROL)
+static void display_fdt_model(const void *blob)
+{
+       const char *model;
+
+       model = (char *)fdt_getprop(blob, 0, "model", NULL);
+       printf("Model: %s\n", model ? model : "<unknown>");
+}
+#endif
+
 /************************************************************************
  *
  * This is the next part if the initialization sequence: we are now
@@ -612,6 +622,15 @@ void board_init_r(gd_t *id, ulong dest_addr)
 
        console_init_r();       /* fully init console as a device */
 
+#ifdef CONFIG_DISPLAY_BOARDINFO_LATE
+# ifdef CONFIG_OF_CONTROL
+       /* Put this here so it appears on the LCD, now it is ready */
+       display_fdt_model(gd->fdt_blob);
+# else
+       checkboard();
+# endif
+#endif
+
 #if defined(CONFIG_ARCH_MISC_INIT)
        /* miscellaneous arch dependent initialisations */
        arch_misc_init();