--- /dev/null
+From c121f72a66c5f92fbe2fc53baa274eef39875cec Mon Sep 17 00:00:00 2001
+From: Colin Ian King <colin.king@canonical.com>
+Date: Mon, 24 Oct 2016 23:46:18 +0100
+Subject: [PATCH] net: bgmac: fix spelling mistake: "connecton" -> "connection"
+
+trivial fix to spelling mistake in dev_err message
+
+Signed-off-by: Colin Ian King <colin.king@canonical.com>
+Acked-by: Jon Mason <jon.mason@broadcom.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/ethernet/broadcom/bgmac.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/ethernet/broadcom/bgmac.c
++++ b/drivers/net/ethernet/broadcom/bgmac.c
+@@ -1465,7 +1465,7 @@ static int bgmac_phy_connect(struct bgma
+ phy_dev = phy_connect(bgmac->net_dev, bus_id, &bgmac_adjust_link,
+ PHY_INTERFACE_MODE_MII);
+ if (IS_ERR(phy_dev)) {
+- dev_err(bgmac->dev, "PHY connecton failed\n");
++ dev_err(bgmac->dev, "PHY connection failed\n");
+ return PTR_ERR(phy_dev);
+ }
+
--- /dev/null
+From fcdefccac976ee51dd6071832b842d8fb41c479c Mon Sep 17 00:00:00 2001
+From: Andy Gospodarek <gospo@broadcom.com>
+Date: Mon, 31 Oct 2016 13:32:03 -0400
+Subject: [PATCH] bgmac: stop clearing DMA receive control register right after
+ it is set
+
+Current bgmac code initializes some DMA settings in the receive control
+register for some hardware and then immediately clears those settings.
+Not clearing those settings results in ~420Mbps *improvement* in
+throughput; this system can now receive frames at line-rate on Broadcom
+5871x hardware compared to ~520Mbps today. I also tested a few other
+values but found there to be no discernible difference in CPU
+utilization even if burst size and prefetching values are different.
+
+On the hardware tested there was no need to keep the code that cleared
+all but bits 16-17, but since there is a wide variety of hardware that
+used this driver (I did not look at all hardware docs for hardware using
+this IP block), I find it wise to move this call up and clear bits just
+after reading the default value from the hardware rather than completely
+removing it.
+
+This is a good candidate for -stable >=3.14 since that is when the code
+that was supposed to improve performance (but did not) was introduced.
+
+Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
+Fixes: 56ceecde1f29 ("bgmac: initialize the DMA controller of core...")
+Cc: Hauke Mehrtens <hauke@hauke-m.de>
+Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/ethernet/broadcom/bgmac.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c
+index 31ca204..91cbf92 100644
+--- a/drivers/net/ethernet/broadcom/bgmac.c
++++ b/drivers/net/ethernet/broadcom/bgmac.c
+@@ -307,6 +307,10 @@ static void bgmac_dma_rx_enable(struct bgmac *bgmac,
+ u32 ctl;
+
+ ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL);
++
++ /* preserve ONLY bits 16-17 from current hardware value */
++ ctl &= BGMAC_DMA_RX_ADDREXT_MASK;
++
+ if (bgmac->feature_flags & BGMAC_FEAT_RX_MASK_SETUP) {
+ ctl &= ~BGMAC_DMA_RX_BL_MASK;
+ ctl |= BGMAC_DMA_RX_BL_128 << BGMAC_DMA_RX_BL_SHIFT;
+@@ -317,7 +321,6 @@ static void bgmac_dma_rx_enable(struct bgmac *bgmac,
+ ctl &= ~BGMAC_DMA_RX_PT_MASK;
+ ctl |= BGMAC_DMA_RX_PT_1 << BGMAC_DMA_RX_PT_SHIFT;
+ }
+- ctl &= BGMAC_DMA_RX_ADDREXT_MASK;
+ ctl |= BGMAC_DMA_RX_ENABLE;
+ ctl |= BGMAC_DMA_RX_PARITY_DISABLE;
+ ctl |= BGMAC_DMA_RX_OVERFLOW_CONT;
+--
+2.10.1
+
#include <linux/bcm47xx_nvram.h>
#include "bgmac.h"
-@@ -1400,6 +1401,17 @@ static const struct ethtool_ops bgmac_et
+@@ -1403,6 +1404,17 @@ static const struct ethtool_ops bgmac_et
.get_drvinfo = bgmac_get_drvinfo,
};
/**************************************************
* MII
**************************************************/
-@@ -1536,6 +1548,14 @@ int bgmac_enet_probe(struct bgmac *info)
+@@ -1539,6 +1551,14 @@ int bgmac_enet_probe(struct bgmac *info)
net_dev->hw_features = net_dev->features;
net_dev->vlan_features = net_dev->features;
err = register_netdev(bgmac->net_dev);
if (err) {
dev_err(bgmac->dev, "Cannot register net device\n");
-@@ -1559,6 +1579,10 @@ EXPORT_SYMBOL_GPL(bgmac_enet_probe);
+@@ -1562,6 +1582,10 @@ EXPORT_SYMBOL_GPL(bgmac_enet_probe);
void bgmac_enet_remove(struct bgmac *bgmac)
{