--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "D-Link DAP-1720 A1";
+ compatible = "dlink,dap-1720-a1", "qca,qca9563";
+
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_red;
+
+ label-mac-device = ð0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ button-reset {
+ label = "reset";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+
+ button-wps {
+ label = "wps";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_red: led-status-red {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ panic-indicator;
+ };
+
+ led_status_green: led-status-green {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led-rssi-middle {
+ color = <LED_COLOR_ID_GREEN>;
+ function = "signal"; //LED_FUNCTION_SIGNAL;
+ function-enumerator = <2>;
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led-rssi-top {
+ color = <LED_COLOR_ID_GREEN>;
+ function = "signal"; //LED_FUNCTION_SIGNAL;
+ function-enumerator = <3>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ led-rssi-bottom-green {
+ color = <LED_COLOR_ID_GREEN>;
+ function = "signal"; //LED_FUNCTION_SIGNAL;
+ function-enumerator = <1>;
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+
+ led-rssi-bottom-red {
+ color = <LED_COLOR_ID_RED>;
+ function = "signal"; //LED_FUNCTION_SIGNAL;
+ function-enumerator = <1>;
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot"; // vendor calls it `bootloader`
+ reg = <0x000000 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ compatible = "u-boot,env";
+ label = "u-boot-env"; // vendor calls it `bdcfg`
+ reg = <0x040000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "devdata";
+ reg = <0x050000 0x10000>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_ath10k: macaddr@94 {
+ compatible = "mac-base";
+ reg = <0x94 0x11>;
+ #nvmem-cell-cells = <1>;
+ };
+
+ macaddr_ath9k: macaddr@b0 {
+ compatible = "mac-base";
+ reg = <0xb0 0x11>;
+ #nvmem-cell-cells = <1>;
+ };
+
+ macaddr_lan: macaddr@c9 {
+ compatible = "mac-base";
+ reg = <0xc9 0x11>;
+ #nvmem-cell-cells = <1>;
+ };
+ };
+ };
+
+ partition@60000 {
+ label = "devconf";
+ reg = <0x060000 0x10000>;
+ read-only;
+ };
+
+ partition@70000 {
+ compatible = "seama";
+ label = "firmware";
+ reg = <0x070000 0xf80000>;
+ };
+
+ partition@ff0000 {
+ label = "art"; // vendor calls it `radiocfg`
+ reg = <0xff0000 0x010000>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cal_ath9k: cal@1000 {
+ reg = <0x1000 0x440>;
+ };
+
+ cal_ath10k: cal@5000 {
+ reg = <0x5000 0x844>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&phy0>;
+ phy-mode = "sgmii";
+
+ nvmem-cells = <&macaddr_lan 0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&pcie {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0x0000 0 0 0 0>;
+
+ nvmem-cells = <&cal_ath10k>, <&macaddr_ath10k 0>;
+ nvmem-cell-names = "calibration", "mac-address";
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ nvmem-cells = <&cal_ath9k>, <&macaddr_ath9k 0>;
+ nvmem-cell-names = "calibration", "mac-address";
+};