[adm5120] restore support for Infineon's EASY 5120 boards

SVN-Revision: 8021

diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c
index ca377d1af447d741f62677e7b330e9e33569727a..e1426cca9d932309af602b6a42946d0124a113c6 100644 (file)
--- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c
@@ -44,7 +44,19 @@ static void switch_bank_gpio3(unsigned bank)
        }
 }
 
-static struct mtd_partition easy83000_partitions[] = {
+static void switch_bank_gpio5(unsigned bank)
+{
+       switch (bank) {
+       case 0:
+               gpio_set_value(ADM5120_GPIO_PIN5, 0);
+               break;
+       case 1:
+               gpio_set_value(ADM5120_GPIO_PIN5, 1);
+               break;
+       }
+}
+
+static struct mtd_partition easy_partitions[] = {
        {
                .name   = "admboot",
                .offset = 0,
@@ -61,27 +73,83 @@ static struct mtd_partition easy83000_partitions[] = {
        }
 };
 
+static struct platform_device *easy5120pata_devices[] __initdata = {
+       &adm5120_flash0_device,
+       /* TODO: add VINETIC2 device? */
+};
+
+static struct platform_device *easy5120rt_devices[] __initdata = {
+       &adm5120_flash0_device,
+       &adm5120_usbc_device
+};
+
+static struct platform_device *easy5120wvoip_devices[] __initdata = {
+       &adm5120_flash0_device,
+       /* TODO: add VINETIC2 device? */
+};
+
 static struct platform_device *easy83000_devices[] __initdata = {
        &adm5120_flash0_device,
+       /* TODO: add VINAX device? */
 };
 
-static void __init easy83000_setup(void)
+static void __init easy_setup_pqfp(void)
 {
        gpio_request(ADM5120_GPIO_PIN3, NULL); /* for flash A20 line */
        gpio_direction_output(ADM5120_GPIO_PIN3, 0);
 
        /* setup data for flash0 device */
        adm5120_flash0_data.switch_bank = switch_bank_gpio3;
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy83000_partitions);
-       adm5120_flash0_data.parts = easy83000_partitions;
+       adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
+       adm5120_flash0_data.parts = easy_partitions;
+
+       /* TODO: setup mac addresses */
+}
+
+static void __init easy_setup_bga(void)
+{
+       gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
+       gpio_direction_output(ADM5120_GPIO_PIN5, 0);
+
+       /* setup data for flash0 device */
+       adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+       adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
+       adm5120_flash0_data.parts = easy_partitions;
 
        /* TODO: setup mac addresses */
 }
 
+static struct adm5120_board easy5120pata_board __initdata = {
+       .mach_type      = MACH_ADM5120_EASY5120PATA,
+       .name           = "Infineon EASY 5120P-ATA Reference Board",
+       .board_setup    = easy_setup_pqfp,
+       .num_eth_ports  = 6,
+       .num_devices    = ARRAY_SIZE(easy5120pata_devices),
+       .devices        = easy5120pata_devices,
+};
+
+static struct adm5120_board easy5120rt_board __initdata = {
+       .mach_type      = MACH_ADM5120_EASY5120RT,
+       .name           = "Infineon EASY 5120-RT Reference Board",
+       .board_setup    = easy_setup_bga,
+       .num_eth_ports  = 5,
+       .num_devices    = ARRAY_SIZE(easy5120rt_devices),
+       .devices        = easy5120rt_devices,
+};
+
+static struct adm5120_board easy5120wvoip_board __initdata = {
+       .mach_type      = MACH_ADM5120_EASY5120WVOIP,
+       .name           = "Infineon EASY 5120-WVoIP Reference Board",
+       .board_setup    = easy_setup_bga,
+       .num_eth_ports  = 6,
+       .num_devices    = ARRAY_SIZE(easy5120wvoip_devices),
+       .devices        = easy5120wvoip_devices,
+};
+
 static struct adm5120_board easy83000_board __initdata = {
        .mach_type      = MACH_ADM5120_EASY83000,
-       .name           = "Infineon EASY-83000",
-       .board_setup    = easy83000_setup,
+       .name           = "Infineon EASY 83000 Reference Board",
+       .board_setup    = easy_setup_pqfp,
        .num_eth_ports  = 6,
        .num_devices    = ARRAY_SIZE(easy83000_devices),
        .devices        = easy83000_devices,
@@ -89,6 +157,9 @@ static struct adm5120_board easy83000_board __initdata = {
 
 static int __init register_boards(void)
 {
+       adm5120_board_register(&easy5120pata_board);
+       adm5120_board_register(&easy5120rt_board);
+       adm5120_board_register(&easy5120wvoip_board);
        adm5120_board_register(&easy83000_board);
        return 0;
 }

diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom.c
index db8037f3beed78365868fda43268a0318280252d..c14c1722995179c470377dc0cb99bd24a892568e 100644 (file)
--- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom.c
+++ b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom.c
@@ -62,9 +62,9 @@ static struct board_desc common_boards[] __initdata = {
        DEFBOARD("BR-6104K",            MACH_ADM5120_BR6104K),
        DEFBOARD("BR-6104KP",           MACH_ADM5120_BR6104K),
        /* Infineon boards */
-       DEFBOARD("EASY 5120",           MACH_ADM5120_EASY5120),
-       DEFBOARD("EASY 5120-RT",        MACH_ADM5120_EASY5120RT),
        DEFBOARD("EASY 5120P-ATA",      MACH_ADM5120_EASY5120PATA),
+       DEFBOARD("EASY 5120-RT",        MACH_ADM5120_EASY5120RT),
+       DEFBOARD("EASY 5120-WVoIP",     MACH_ADM5120_EASY5120WVOIP),
        DEFBOARD("EASY 83000",          MACH_ADM5120_EASY83000),
        /* Mikrotik RouterBOARDs */
        DEFBOARD("111",                 MACH_ADM5120_RB_111),

diff --git a/target/linux/adm5120-2.6/image/Makefile b/target/linux/adm5120-2.6/image/Makefile
index bf4ca5711b4a63b6f74908d47e5c60d812135696..d76e1e1feeb1a39642f08a66a8a2ae4a32da3a35 100644 (file)
--- a/target/linux/adm5120-2.6/image/Makefile
+++ b/target/linux/adm5120-2.6/image/Makefile
@@ -105,9 +105,9 @@ ifeq ($(CONFIG_DEVEL),y)
        $(call Image/Build/Edimax,$(1),ps-3205uwg,$(patsubst jffs2-%,jffs2,$(1)),PS-3205UWg)
        $(call Image/Build/Edimax,$(1),br-6524wg,$(patsubst jffs2-%,jffs2,$(1)),BR-6524WG)
        $(call Image/Build/Edimax,$(1),br-6524wp,$(patsubst jffs2-%,jffs2,$(1)),BR-6524WP)
-       $(call Image/Build/Infineon,$(1),easy-5120,$(patsubst jffs2-%,jffs2,$(1)))
-       $(call Image/Build/Infineon,$(1),easy-5120-rt,$(patsubst jffs2-%,jffs2,$(1)))
        $(call Image/Build/Infineon,$(1),easy-5120p-ata,$(patsubst jffs2-%,jffs2,$(1)))
+       $(call Image/Build/Infineon,$(1),easy-5120-rt,$(patsubst jffs2-%,jffs2,$(1)))
+       $(call Image/Build/Infineon,$(1),easy-5120-wvoip,$(patsubst jffs2-%,jffs2,$(1)))
        $(call Image/Build/Infineon,$(1),easy-83000,$(patsubst jffs2-%,jffs2,$(1)))
        $(call Image/Build/MyLoader,$(1),np27g,$(patsubst jffs2-%,jffs2,$(1)),NP27G)
        $(call Image/Build/MyLoader,$(1),np28g,$(patsubst jffs2-%,jffs2,$(1)),NP28G)

diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/config.h b/target/linux/adm5120-2.6/image/lzma-loader/src/config.h
index b90fcfbe9b624953e0dee8434f2a4f44a1c38705..f8bb8e2cce8bb4efab5f69556038365d59336704 100644 (file)
--- a/target/linux/adm5120-2.6/image/lzma-loader/src/config.h
+++ b/target/linux/adm5120-2.6/image/lzma-loader/src/config.h
@@ -64,16 +64,19 @@
 /*
  * Infineon boards
  */
-#if defined(CONFIG_BOARD_EASY5120)
-#  define CONFIG_BOARD_NAME    "EASY 5120"
+#if defined(CONFIG_BOARD_EASY5120PATA)
+#  define CONFIG_BOARD_NAME    "EASY 5120P-ATA"
+#  define CONFIG_FLASH_SIZE    FLASH_4M
 #endif
 
 #if defined(CONFIG_BOARD_EASY5120RT)
 #  define CONFIG_BOARD_NAME    "EASY 5120-RT"
+#  define CONFIG_FLASH_SIZE    FLASH_4M
 #endif
 
-#if defined(CONFIG_BOARD_EASY5120PATA)
-#  define CONFIG_BOARD_NAME    "EASY 5120P-ATA"
+#if defined(CONFIG_BOARD_EASY5120WVOIP)
+#  define CONFIG_BOARD_NAME    "EASY 5120-WVOIP"
+#  define CONFIG_FLASH_SIZE    FLASH_4M
 #endif
 
 #if defined(CONFIG_BOARD_EASY83000)
@@ -105,4 +108,4 @@
 #  define CONFIG_FLASH_SIZE    FLASH_2M
 #endif
 
-#endif /* _CONFIG_H_ */
\ No newline at end of file
+#endif /* _CONFIG_H_ */

diff --git a/target/linux/adm5120-2.6/patches-2.6.22/001-adm5120.patch b/target/linux/adm5120-2.6/patches-2.6.22/001-adm5120.patch
index cc2a88ed5afb7095540a174e2dc3467a77014d88..14cb612b0884987d8566beef90d2ee6e00583dd6 100644 (file)
--- a/target/linux/adm5120-2.6/patches-2.6.22/001-adm5120.patch
+++ b/target/linux/adm5120-2.6/patches-2.6.22/001-adm5120.patch
@@ -103,11 +103,11 @@ Index: linux-2.6.22.1/include/asm-mips/bootinfo.h
 +#define MACH_ADM5120_CAS861   39      /* Cellvision CAS-861/861W */
 +#define MACH_ADM5120_NFS101U  40      /* Cellvision NFS-101U/101WU */
 +#define MACH_ADM5120_NFS202U  41      /* Cellvision NFS-202U/202WU */
-+#define MACH_ADM5120_EASY5120 43      /* Infineon EASY 5120 */
-+#define MACH_ADM5120_EASY5120RT 44    /* Infineon EASY 5120-RT */
-+#define MACH_ADM5120_EASY5120PATA 45  /* Infineon EASY 5120P-ATA */
-+#define MACH_ADM5120_EASY83000        46      /* Infineon EASY-83000 */
-+#define MACH_ADM5120_BR6104K  47      /* Edimax BR-6104K */
++#define MACH_ADM5120_EASY5120PATA 42  /* Infineon EASY 5120P-ATA */
++#define MACH_ADM5120_EASY5120RT 43    /* Infineon EASY 5120-RT */
++#define MACH_ADM5120_EASY5120WVOIP 44 /* Infineon EASY 5120-WVoIP */
++#define MACH_ADM5120_EASY83000        45      /* Infineon EASY-83000 */
++#define MACH_ADM5120_BR6104K  46      /* Edimax BR-6104K */
 +
  #define CL_SIZE                       COMMAND_LINE_SIZE