ixgbe: add support functions to access thermal data

Some 82599 adapters contain thermal data that we can get to via
an i2c interface.  These functions provide support to get at that
data.  A following patch will export this data.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index e59888163a17050cdbd05ab7980b5f82e8c61473..6c6c66eace6c802ccf37fa06e5dc82d7e9f4305b 100644 (file)
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -3604,3 +3604,174 @@ void ixgbe_clear_tx_pending(struct ixgbe_hw *hw)
        IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext);
        IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
 }
+
+static const u8 ixgbe_emc_temp_data[4] = {
+       IXGBE_EMC_INTERNAL_DATA,
+       IXGBE_EMC_DIODE1_DATA,
+       IXGBE_EMC_DIODE2_DATA,
+       IXGBE_EMC_DIODE3_DATA
+};
+static const u8 ixgbe_emc_therm_limit[4] = {
+       IXGBE_EMC_INTERNAL_THERM_LIMIT,
+       IXGBE_EMC_DIODE1_THERM_LIMIT,
+       IXGBE_EMC_DIODE2_THERM_LIMIT,
+       IXGBE_EMC_DIODE3_THERM_LIMIT
+};
+
+/**
+ *  ixgbe_get_ets_data - Extracts the ETS bit data
+ *  @hw: pointer to hardware structure
+ *  @ets_cfg: extected ETS data
+ *  @ets_offset: offset of ETS data
+ *
+ *  Returns error code.
+ **/
+static s32 ixgbe_get_ets_data(struct ixgbe_hw *hw, u16 *ets_cfg,
+                             u16 *ets_offset)
+{
+       s32 status = 0;
+
+       status = hw->eeprom.ops.read(hw, IXGBE_ETS_CFG, ets_offset);
+       if (status)
+               goto out;
+
+       if ((*ets_offset == 0x0000) || (*ets_offset == 0xFFFF)) {
+               status = IXGBE_NOT_IMPLEMENTED;
+               goto out;
+       }
+
+       status = hw->eeprom.ops.read(hw, *ets_offset, ets_cfg);
+       if (status)
+               goto out;
+
+       if ((*ets_cfg & IXGBE_ETS_TYPE_MASK) != IXGBE_ETS_TYPE_EMC_SHIFTED) {
+               status = IXGBE_NOT_IMPLEMENTED;
+               goto out;
+       }
+
+out:
+       return status;
+}
+
+/**
+ *  ixgbe_get_thermal_sensor_data - Gathers thermal sensor data
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the thermal sensor data structure
+ **/
+s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw)
+{
+       s32 status = 0;
+       u16 ets_offset;
+       u16 ets_cfg;
+       u16 ets_sensor;
+       u8  num_sensors;
+       u8  i;
+       struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+       /* Only support thermal sensors attached to 82599 physical port 0 */
+       if ((hw->mac.type != ixgbe_mac_82599EB) ||
+            (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) {
+               status = IXGBE_NOT_IMPLEMENTED;
+               goto out;
+       }
+
+       status = ixgbe_get_ets_data(hw, &ets_cfg, &ets_offset);
+       if (status)
+               goto out;
+
+       num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK);
+       if (num_sensors > IXGBE_MAX_SENSORS)
+               num_sensors = IXGBE_MAX_SENSORS;
+
+       for (i = 0; i < num_sensors; i++) {
+               u8  sensor_index;
+               u8  sensor_location;
+
+               status = hw->eeprom.ops.read(hw, (ets_offset + 1 + i),
+                                            &ets_sensor);
+               if (status)
+                       goto out;
+
+               sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >>
+                               IXGBE_ETS_DATA_INDEX_SHIFT);
+               sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >>
+                                  IXGBE_ETS_DATA_LOC_SHIFT);
+
+               if (sensor_location != 0) {
+                       status = hw->phy.ops.read_i2c_byte(hw,
+                                       ixgbe_emc_temp_data[sensor_index],
+                                       IXGBE_I2C_THERMAL_SENSOR_ADDR,
+                                       &data->sensor[i].temp);
+                       if (status)
+                               goto out;
+               }
+       }
+out:
+       return status;
+}
+
+/**
+ * ixgbe_init_thermal_sensor_thresh_generic - Inits thermal sensor thresholds
+ * @hw: pointer to hardware structure
+ *
+ * Inits the thermal sensor thresholds according to the NVM map
+ * and save off the threshold and location values into mac.thermal_sensor_data
+ **/
+s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw)
+{
+       s32 status = 0;
+       u16 ets_offset;
+       u16 ets_cfg;
+       u16 ets_sensor;
+       u8  low_thresh_delta;
+       u8  num_sensors;
+       u8  therm_limit;
+       u8  i;
+       struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+       memset(data, 0, sizeof(struct ixgbe_thermal_sensor_data));
+
+       /* Only support thermal sensors attached to 82599 physical port 0 */
+       if ((hw->mac.type != ixgbe_mac_82599EB) ||
+           (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) {
+               status = IXGBE_NOT_IMPLEMENTED;
+               goto out;
+       }
+
+       status = ixgbe_get_ets_data(hw, &ets_cfg, &ets_offset);
+       if (status)
+               goto out;
+
+       low_thresh_delta = ((ets_cfg & IXGBE_ETS_LTHRES_DELTA_MASK) >>
+                            IXGBE_ETS_LTHRES_DELTA_SHIFT);
+       num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK);
+       if (num_sensors > IXGBE_MAX_SENSORS)
+               num_sensors = IXGBE_MAX_SENSORS;
+
+       for (i = 0; i < num_sensors; i++) {
+               u8  sensor_index;
+               u8  sensor_location;
+
+               hw->eeprom.ops.read(hw, (ets_offset + 1 + i), &ets_sensor);
+               sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >>
+                               IXGBE_ETS_DATA_INDEX_SHIFT);
+               sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >>
+                                  IXGBE_ETS_DATA_LOC_SHIFT);
+               therm_limit = ets_sensor & IXGBE_ETS_DATA_HTHRESH_MASK;
+
+               hw->phy.ops.write_i2c_byte(hw,
+                       ixgbe_emc_therm_limit[sensor_index],
+                       IXGBE_I2C_THERMAL_SENSOR_ADDR, therm_limit);
+
+               if (sensor_location == 0)
+                       continue;
+
+               data->sensor[i].location = sensor_location;
+               data->sensor[i].caution_thresh = therm_limit;
+               data->sensor[i].max_op_thresh = therm_limit - low_thresh_delta;
+       }
+out:
+       return status;
+}
+

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
index d6d34324540cfa2af051a41b47c50858e239719e..f992777e67a8093f616c85989f9ea6e754e0e6f1 100644 (file)
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h
@@ -107,6 +107,19 @@ void ixgbe_clear_tx_pending(struct ixgbe_hw *hw);
 void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, int num_pb,
                             u32 headroom, int strategy);
 
+#define IXGBE_I2C_THERMAL_SENSOR_ADDR  0xF8
+#define IXGBE_EMC_INTERNAL_DATA                0x00
+#define IXGBE_EMC_INTERNAL_THERM_LIMIT 0x20
+#define IXGBE_EMC_DIODE1_DATA          0x01
+#define IXGBE_EMC_DIODE1_THERM_LIMIT   0x19
+#define IXGBE_EMC_DIODE2_DATA          0x23
+#define IXGBE_EMC_DIODE2_THERM_LIMIT   0x1A
+#define IXGBE_EMC_DIODE3_DATA          0x2A
+#define IXGBE_EMC_DIODE3_THERM_LIMIT   0x30
+
+s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw);
+s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw);
+
 #define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg)))
 
 #ifndef writeq

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 4acd9e665b287a4dbfa213078d5a15eee184fc22..d82e25c321ffe19feda4fa91548ceae4a60df249 100644 (file)
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -112,6 +112,27 @@
 #define IXGBE_I2C_DATA_OUT  0x00000008
 #define IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT     500
 
+#define IXGBE_I2C_THERMAL_SENSOR_ADDR  0xF8
+#define IXGBE_EMC_INTERNAL_DATA                0x00
+#define IXGBE_EMC_INTERNAL_THERM_LIMIT 0x20
+#define IXGBE_EMC_DIODE1_DATA          0x01
+#define IXGBE_EMC_DIODE1_THERM_LIMIT   0x19
+#define IXGBE_EMC_DIODE2_DATA          0x23
+#define IXGBE_EMC_DIODE2_THERM_LIMIT   0x1A
+
+#define IXGBE_MAX_SENSORS              3
+
+struct ixgbe_thermal_diode_data {
+       u8 location;
+       u8 temp;
+       u8 caution_thresh;
+       u8 max_op_thresh;
+};
+
+struct ixgbe_thermal_sensor_data {
+       struct ixgbe_thermal_diode_data sensor[IXGBE_MAX_SENSORS];
+};
+
 /* Interrupt Registers */
 #define IXGBE_EICR      0x00800
 #define IXGBE_EICS      0x00808
@@ -1678,6 +1699,22 @@ enum {
 #define IXGBE_PBANUM0_PTR       0x15
 #define IXGBE_PBANUM1_PTR       0x16
 #define IXGBE_FREE_SPACE_PTR    0X3E
+
+/* External Thermal Sensor Config */
+#define IXGBE_ETS_CFG                   0x26
+#define IXGBE_ETS_LTHRES_DELTA_MASK     0x07C0
+#define IXGBE_ETS_LTHRES_DELTA_SHIFT    6
+#define IXGBE_ETS_TYPE_MASK             0x0038
+#define IXGBE_ETS_TYPE_SHIFT            3
+#define IXGBE_ETS_TYPE_EMC              0x000
+#define IXGBE_ETS_TYPE_EMC_SHIFTED      0x000
+#define IXGBE_ETS_NUM_SENSORS_MASK      0x0007
+#define IXGBE_ETS_DATA_LOC_MASK         0x3C00
+#define IXGBE_ETS_DATA_LOC_SHIFT        10
+#define IXGBE_ETS_DATA_INDEX_MASK       0x0300
+#define IXGBE_ETS_DATA_INDEX_SHIFT      8
+#define IXGBE_ETS_DATA_HTHRESH_MASK     0x00FF
+
 #define IXGBE_SAN_MAC_ADDR_PTR  0x28
 #define IXGBE_DEVICE_CAPS       0x2C
 #define IXGBE_SERIAL_NUMBER_MAC_ADDR 0x11
@@ -2775,6 +2812,8 @@ struct ixgbe_mac_operations {
 
        /* Manageability interface */
        s32 (*set_fw_drv_ver)(struct ixgbe_hw *, u8, u8, u8, u8);
+       s32 (*get_thermal_sensor_data)(struct ixgbe_hw *);
+       s32 (*init_thermal_sensor_thresh)(struct ixgbe_hw *hw);
 };
 
 struct ixgbe_phy_operations {
@@ -2832,6 +2871,7 @@ struct ixgbe_mac_info {
        bool                            orig_link_settings_stored;
        bool                            autotry_restart;
        u8                              flags;
+       struct ixgbe_thermal_sensor_data  thermal_sensor_data;
 };
 
 struct ixgbe_phy_info {